Sample records for tin

  1. 10 CFR Appendix C to Part 20 - Quantities 1 of Licensed Material Requiring Labeling

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Indium-115 100 Indium-116m 1,000 Indium-117m 1,000 Indium-117 1,000 Indium-119m 1,000 Tin-110 100 Tin-111 1,000 Tin-113 100 Tin-117m 100 Tin-119m 100 Tin-121m 100 Tin-121 1,000 Tin-123m 1,000 Tin-123 10 Tin-125 10 Tin-126 10 Tin-127 1,000 Tin-128 1,000 Antimony-115 1,000 Antimony-116m 1,000 Antimony-116 1...

  2. The C-Terminal Extension Unique to the Long Isoform of the Shelterin Component TIN2 Enhances Its Interaction with TRF2 in a Phosphorylation- and Dyskeratosis Congenita Cluster-Dependent Fashion.

    PubMed

    Nelson, Nya D; Dodson, Lois M; Escudero, Laura; Sukumar, Ann T; Williams, Christopher L; Mihalek, Ivana; Baldan, Alessandro; Baird, Duncan M; Bertuch, Alison A

    2018-06-15

    TIN2 is central to the shelterin complex, linking the telomeric proteins TRF1 and TRF2 with TPP1/POT1. Mutations in TINF2 , which encodes TIN2, that are found in dyskeratosis congenita (DC) result in very short telomeres and cluster in a region shared by the two TIN2 isoforms, TIN2S (short) and TIN2L (long). Here we show that TIN2L, but not TIN2S, is phosphorylated. TRF2 interacts more with TIN2L than TIN2S, and both the DC cluster and phosphorylation promote this enhanced interaction. The binding of TIN2L, but not TIN2S, is affected by TRF2-F120, which is also required for TRF2's interaction with end processing factors such as Apollo. Conversely, TRF1 interacts more with TIN2S than with TIN2L. A DC-associated mutation further reduces TIN2L-TRF1, but not TIN2S-TRF1, interaction. Cells overexpressing TIN2L or phosphomimetic TIN2L are permissive to telomere elongation, whereas cells overexpressing TIN2S or phosphodead TIN2L are not. Telomere lengths are unchanged in cell lines in which TIN2L expression has been eliminated by clustered regularly interspaced short palindromic repeat (CRISPR)/Cas9-mediated mutation. These results indicate that TIN2 isoforms are biochemically and functionally distinguishable and that shelterin composition could be fundamentally altered in patients with TINF2 mutations. Copyright © 2018 Nelson et al.

  3. Synthesis and Characterization of Tin(IV) Oxide Obtained by Chemical Vapor Deposition Method

    NASA Astrophysics Data System (ADS)

    Nagirnyak, Svitlana V.; Lutz, Victoriya A.; Dontsova, Tatiana A.; Astrelin, Igor M.

    2016-07-01

    The effect of precursors on the characteristics of tin oxide obtained by chemical vapor deposition (CVD) method was investigated. The synthesis of nanosized tin(IV) oxide was carried out with the use of two different precursors: tin(II) oxalate obtained using tin chloride(II) and oxalic acid; tin(II) oxalate obtained using tin chloride(II); and ammonium oxalate. The synthesized tin(IV) oxide samples were studied by electron microscopy, X-ray diffraction and optical spectra. The lattice parameters of tin(IV) oxide samples were defined, the bandgap of samples were calculated.

  4. International strategic minerals inventory summary report; tin

    USGS Publications Warehouse

    Sutphin, D.M.; Sabin, A.E.; Reed, B.L.

    1990-01-01

    The International Strategic Minerals Inventory tin inventory contains records for 56 major tin deposits and districts in 21 countries. These countries accounted for 98 percent of the 10 million metric tons of tin produced in the period 1934-87. Tin is a good alloying metal and is generally nontoxic, and its chief uses are as tinplate for tin cans and as solder in electronics. The 56 locations consist of 39 lode deposits and 17 placers and contain almost 7.5 million metric tons of tin in identified economic resources (R1E) and another 1.5 million metric tons of tin in other resource categories. Most of these resources are in major deposits that have been known for over a hundred years. Lode deposits account for 44 percent of the R1E and 87 percent of the resources in other categories. Placer deposits make up the remainder. Low-income and middle-income countries, including Bolivia and Brazil and countries along the Southeast Asian Tin Belt such as Malaysia, Thailand, and Indonesia account for 91 percent of the R1E resources of tin and for 61 percent of resources in other categories. The United States has less than 0.05 percent of the world's tin R1E in major deposits. Available data suggest that the Soviet Union may have about 4 percent of resources in this category. The industrial market economy countries of the United States, Japan, Federal Republic of Germany, and the United Kingdom are major consumers of tin, whereas the major tin-producing countries generally consume little tin. The Soviet Union and China are both major producers and consumers of tin. At the end of World War II, the four largest tin-producing countries (Bolivia, the Belgian Congo (Zaire), Nigeria, and Malaysia) produced over 80 percent of the world's tin. In 1986, the portion of production from the four largest producers (Malaysia, Brazil, Soviet Union, Indonesia) declined to about 55 percent, while the price of tin rose from about $1,500 to $18,000 per metric ton. In response to tin shortages during World War II, the United States began stockpiling refined tin metal from approximately 1946 to 1953 to ensure a strategic supply in the event of another war. Since World War II, there have been six International Tin Agreements to maintain price and supply stability between tin producers and consumers. Artificially high prices set by the tin-producing members and a tin glut brought on by independent producers like Brazil caused the collapse of the world tin market in late 1985; the International Tin Council exhausted its credit to support the market price. By the year 2025, Bolivia's underground lode mines will likely have insignificant production, as will those in the United Kingdom. Tin mines in the Southeast Asian Tin Belt will still be active. Brazil, which has risen from the eighth-ranked tin-producing country in 1982 to the largest producer in 1988, will likely be a major influence on world tin production well into the 21st century. The future mining activity of deposits presently inactive in Australia is impossible to predict.

  5. 40 CFR 421.290 - Applicability: Description of the secondary tin subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... secondary tin subcategory. 421.290 Section 421.290 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Tin Subcategory § 421.290 Applicability: Description of the secondary tin subcategory. The provisions of this subpart are applicable to discharges resulting from the production of tin at secondary tin...

  6. 40 CFR 421.290 - Applicability: Description of the secondary tin subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... secondary tin subcategory. 421.290 Section 421.290 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Tin Subcategory § 421.290 Applicability: Description of the secondary tin subcategory. The provisions of this subpart are applicable to discharges resulting from the production of tin at secondary tin...

  7. 40 CFR 421.290 - Applicability: Description of the secondary tin subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... secondary tin subcategory. 421.290 Section 421.290 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Tin Subcategory § 421.290 Applicability: Description of the secondary tin subcategory. The provisions of this subpart are applicable to discharges resulting from the production of tin at secondary tin...

  8. 40 CFR 421.290 - Applicability: Description of the secondary tin subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... secondary tin subcategory. 421.290 Section 421.290 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Tin Subcategory § 421.290 Applicability: Description of the secondary tin subcategory. The provisions of this subpart are applicable to discharges resulting from the production of tin at secondary tin...

  9. 40 CFR 421.290 - Applicability: Description of the secondary tin subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... secondary tin subcategory. 421.290 Section 421.290 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Tin Subcategory § 421.290 Applicability: Description of the secondary tin subcategory. The provisions of this subpart are applicable to discharges resulting from the production of tin at secondary tin...

  10. Comparative assessment of gastrointestinal irritant potency in man of tin(II) chloride and tin migrated from packaging.

    PubMed

    Boogaard, Peter J; Boisset, Michel; Blunden, Steve; Davies, Scot; Ong, Teng Jin; Taverne, Jean-Pierre

    2003-12-01

    Tin is present in low concentrations in most canned foods and beverages, the highest levels being found in products packaged in unlacquered or partially lacquered tinplate cans. A limited number of case-reports of acute gastrointestinal disorders after consumption of food containing 100-500 mg/kg tin have been reported, but these reports suffer many insufficiencies. Controlled clinical studies on acute effects of tin migrated from packaging suggest a threshold concentration for adverse effects (AEs) of >730 mg/kg. Two separate randomised, single-centre, double-blind, crossover studies, enabling comparison of the tolerability of tin added as tin(II) chloride at concentrations of <0.5, 161, 264 and 529 mg/kg in 250 ml tomato juice in 20 volunteers (Study 1) and tin migrated from packaging at concentrations of <0.5, 201 and 267 mg/kg in 250 ml tomato soup in 24 volunteers (Study 2) were carried out. Distribution studies were conducted to get insight in the acute AEs of low molecular weight (<1000 Da) tin species in the soluble fraction of food products. Results show that the chemical form of tin and not the elemental concentration per se determines the severity of AEs. A clear dose-response relationship was only observed when tin was added as tin(II) chloride in tomato juice. No clinically significant AEs were reported in Study 2 and comparison of the incidence of tin-related AEs showed no difference between the dose levels (including control). Tin species of low molecular weight in supernatant represented 31-32% of total tin in canned tomato soup versus 56-61% in juice freshly spiked with tin(II) chloride. Differences in the incidence of AEs following administration of tomato juice with 161 and 264 mg of tin per kg and tomato soup with 201 and 267 mg of tin per kg likely results from differences in the concentration of low molecular weight tin species and in the nature of tin complexes formed. The results of this work demonstrate that tin levels up to 267 mg/kg in canned food cause no AEs in healthy adults and support the currently proposed tin levels of 200 mg/kg and 250 mg/kg for canned beverages and canned foods, respectively, as safe levels for adults in the general population.

  11. Telomere dysfunction and cell survival: roles for distinctTIN2-containing complexes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kim, Sahn-Ho; Davalos, Albert R.; Heo, Seok-Jin

    Telomeres are maintained by three DNA binding proteins, TRF1, TRF2 and POT1, and several associated factors. One factor, TIN2, binds TRF1 and TRF2 directly and POT1 indirectly. These and two other proteins form a soluble complex that may be the core telomere-maintenance complex. It is not clear whether subcomplexes exist or function in vivo. Here, we provide evidence for two TIN2 subcomplexes with distinct functions in human cells. TIN2 ablation by RNA interference caused telomere uncapping and p53-independent cell death in all cells tested. However, we isolated two TIN2 complexes from cell lysates, each selectively sensitive to a TIN2 mutantmore » (TIN2-13, TIN2-15C). In cells with wild-type p53 function, TIN2-15C was more potent than TIN2-13 in causing telomere uncapping and eventual growth arrest. In cells lacking p53 function, TIN215C more than TIN2-13 caused genomic instability and cell death. Thus, TIN2 subcomplexes likely have distinct functions in telomere maintenance, and may provide selective targets for eliminating cells with mutant p53.« less

  12. Tin

    USGS Publications Warehouse

    Kamilli, Robert J.; Kimball, Bryn E.; Carlin, James F.; Schulz, Klaus J.; DeYoung,, John H.; Seal, Robert R.; Bradley, Dwight C.

    2017-12-19

    Tin (Sn) is one of the first metals to be used by humans. Almost without exception, tin is used as an alloy. Because of its hardening effect on copper, tin was used in bronze implements as early as 3500 B.C. The major uses of tin today are for cans and containers, construction materials, transportation materials, and solder. The predominant ore mineral of tin, by far, is cassiterite (SnO2).In 2015, the world’s total estimated mine production of tin was 289,000 metric tons of contained tin. Total world reserves at the end of 2016 were estimated to be 4,700,000 metric tons. China held about 24 percent of the world’s tin reserves and accounted for 38 percent of the world’s 2015 production of tin.The proportion of scrap used in tin production is between 10 and 25 percent. Unlike many metals, tin recycling is relatively efficient, and the fraction of tin in discarded products that get recycled is greater than 50 percent.Only about 20 percent of the world’s identified tin resources occur as primary hydrothermal hard-rock veins, or lodes. These lodes contain predominantly high-temperature minerals and almost invariably occur in close association with silicic, peraluminous granites. About 80 percent of the world’s identified tin resources occur as unconsolidated secondary or placer deposits in riverbeds and valleys or on the sea floor. The largest concentration of both onshore and offshore placers is in the extensive tin belt of Southeast Asia, which stretches from China in the north, through Thailand, Burma (also referred to as Myanmar), and Malaysia, to the islands of Indonesia in the south. Furthermore, tin placers are almost always found closely allied to the granites from which they originate. Other countries with significant tin resources are Australia, Bolivia, and Brazil.Most hydrothermal tin deposits belong to what can be thought of as a superclass of porphyry-greisen deposits. The hydrothermal tin deposits are all characterized by a close spatial, temporal, and genetic association with highly differentiated, peraluminous porphyritic granite intrusions. The intrusions form pegmatites; disseminated ore; parallel or subparallel, greisen-bordered sheeted veins that either cross-cut the intrusion or are peripheral to it; skarns; and (or) limestone replacements that contain different amounts of cassiterite, molybdenite, and wolframite.The tectonic settings of tin-bearing granites are relatively well understood and of limited variety. Tin and tungsten deposits and their associated igneous rocks are found mainly in continental settings.Historically, prospecting for tin has been carried out by the time-honored methods of panning, drilling, trenching, and assaying. Geophysical and geochemical surveys have been employed to cover large areas more rapidly, isolating areas of possible tin deposits so that drilling can be more effective and less costly. Elemental concentrations and relationships of the lithophile elements, especially barium, lithium, niobium, potassium, rubidium, and zirconium, are the most reliable chemical indicators of ore-forming processes and tin-bearing potential.The average human diet includes an intake of about 10 milligrams per day of tin. Ingestion of tin in significantly greater amounts than 10 milligrams per day may lead to a stomach ache, anemia, and liver and kidney problems. Exposure to some organo-tin compounds can interfere with brain and nervous system function and, in severe cases, can cause death. Extended inhalation of tin oxide—an issue mainly for those people who work in the tin industry—results in a higher potential to develop stannosis, which is a mild disease of the lungs caused by the inhalation of tin-bearing dust. Inorganic tin is poorly absorbed by the body, and no evidence exists for the carcinogenicity of metallic tin and tin compounds in humans.Most placer tin deposits are mined by open pit and (or) dredging methods. Mining of alluvial placers in modern streambeds and riverbeds is likely to increase the amount of sediment delivered downstream. This, combined with potential diversion of rivers and streams, may negatively affect downstream ecosystems. Many of the placer deposits located in Burma, Indonesia, Malaysia, and Thailand are located offshore. Most offshore placer tin deposits are mined by dredging methods, which have the potential to negatively affect benthic, midwater, and pelagic ecosystems.In a congressionally mandated U.S. Department of Defense study of strategic minerals published in 2013, tin has the greatest shortfall amount (insufficient supply to meet demand) at \\$416 million; this amount is more than twice that of antimony ($182 million), which is the strategic mineral with the next largest shortfall amount (U.S. Department of Defense, 2013). The United States imported 75 percent of its tin supply in 2015. During the period 2012–15, these imports were from, in descending order of amount imported, Peru, Indonesia, Malaysia, and Bolivia.A promising advancement concerning research into the origin of tin deposits is the recent development of a reliable method of analyzing tin isotopes in cassiterite. Although the mechanism of transport and deposition of tin is fairly well understood, the means by which tin is incorporated into the parent magma at the points of magma generation and ascent needs further investigation.Tin metallogenic provinces worldwide are well known. Consequently, any undiscovered tin deposits will likely be spatially close to known deposits or extensions of the same.

  13. Hollow tin/chromium whiskers

    NASA Astrophysics Data System (ADS)

    Cheng, Jing; Vianco, Paul T.; Li, James C. M.

    2010-05-01

    Tin whiskers have been an engineering challenge for over five decades. The mechanism has not been agreed upon thus far. This experiment aimed to identify a mechanism by applying compressive stresses to a tin film evaporated on silicon substrate with an adhesion layer of chromium in between. A phenomenon was observed in which hollow whiskers grew inside depleted areas. Using focused ion beam, the hollow whiskers were found to contain both tin and chromium. At the bottom of the depleted areas, thin tin/tin oxide film remained over the chromium layer. It indicates that tin transport occurred along the interface between tin and chromium layers.

  14. Peroxide induced tin oxide coating of graphene oxide at room temperature and its application for lithium ion batteries.

    PubMed

    Sladkevich, S; Gun, J; Prikhodchenko, P V; Gutkin, V; Mikhaylov, A A; Novotortsev, V M; Zhu, J X; Yang, D; Hng, H H; Tay, Y Y; Tsakadze, Z; Lev, O

    2012-12-07

    We describe a new, simple and low-temperature method for ultra-thin coating of graphene oxide (GO) by peroxostannate, tin oxide or a mixture of tin and tin oxide crystallites by different treatments. The technique is environmentally friendly and does not require complicated infrastructure, an autoclave or a microwave. The supported peroxostannate phase is partially converted after drying to crystalline tin oxide with average, 2.5 nm cassiterite crystals. Mild heat treatment yielded full coverage of the reduced graphene oxide by crystalline tin oxide. Extensive heat treatment in vacuum at >500 °C yielded a mixture of elemental tin and cassiterite tin oxide nanoparticles supported on reduced graphene oxide (rGO). The usefulness of the new approach was demonstrated by the preparation of two types of lithium ion anodes: tin oxide-rGO and a mixture of tin oxide and tin coated rGO composites (SnO(2)-Sn-rGO). The electrodes exhibited stable charge/discharge cyclability and high charging capacity due to the intimate contact between the conductive graphene and the very small tin oxide crystallites. The charging/discharging capacity of the anodes exceeded the theoretical capacity predicted based on tin lithiation. The tin oxide coated rGO exhibited higher charging capacity but somewhat lower stability upon extended charge/discharge cycling compared to SnO(2)-Sn-rGO.

  15. Telomere dysfunction and cell survival: Roles for distinct TIN2-containing complexes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kim, Sahn-ho; Davalos, Albert R.; Heo, Seok-Jin

    Telomeres are maintained by three DNA binding proteins (TRF1, TRF2 and POT1), and several associated factors. One factor, TIN2, binds TRF1 and TRF2 directly and POT1 indirectly. Along with two other proteins, TPP1 and hRap1, these form a soluble complex that may be the core telomere maintenance complex. It is not clear whether sub-complexes also exist in vivo. We provide evidence for two TIN2 sub-complexes with distinct functions in human cells. We isolated these two TIN2 sub-complexes from nuclear lysates of unperturbed cells and cells expressing TIN2 mutants TIN2-13, TIN2-15C, which cannot bind TRF2 or TRF1, respectively. In cells withmore » wild-type p53 function, TIN2-15C was more potent than TIN2-13 in causing telomere uncapping and eventual growth arrest. In cells lacking p53 function, TIN2-15C was more potent than TIN2-13 in causing telomere dysfunction and cell death. Our findings suggest that distinct TIN2 complexes exist, and that TIN2-15C-sensitive subcomplexes are particularly important for cell survival in the absence of functional p53.« less

  16. Strategies to Reduce Tin and Other Metals in Electronic Cigarette Aerosol

    PubMed Central

    Williams, Monique; To, An; Bozhilov, Krassimir; Talbot, Prue

    2015-01-01

    Background Metals are present in electronic cigarette (EC) fluid and aerosol and may present health risks to users. Objective The objective of this study was to measure the amounts of tin, copper, zinc, silver, nickel and chromium in the aerosol from four brands of EC and to identify the sources of these metals by examining the elemental composition of the atomizer components. Methods Four brands of popular EC were dissected and the cartomizers were examined microscopically. Elemental composition of cartomizer components was determined using integrated energy dispersive X-ray microanalysis, and the concentrations of the tin, copper, zinc silver, nickel, and chromium in the aerosol were determined for each brand using inductively coupled plasma optical emission spectroscopy. Results All filaments were made of nickel and chromium. Thick wires were copper coated with either tin or silver. Wires were joined to each other by tin solder, brazing, or by brass clamps. High concentrations of tin were detected in the aerosol when tin solder joints were friable. Tin coating on copper wires also contributed to tin in the aerosol. Conclusions Tin concentrations in EC aerosols varied both within and between brands. Tin in aerosol was reduced by coating the thick wire with silver rather than tin, placing stable tin solder joints outside the atomizing chamber, joining wires with brass clamps or by brazing rather than soldering wires. These data demonstrate the feasibility of removing tin and other unwanted metals from EC aerosol by altering designs and using materials of suitable quality. PMID:26406602

  17. METHOD FOR JOINING ALUMINUM TO STAINLESS STEEL

    DOEpatents

    Lemon, L.C.

    1960-05-24

    Aluminum may be joined to stainless steel without the use of flux by tinning the aluminum with a tin solder containing 1% silver and 1% lead, tinning the stainless steel with a 50% lead 50% tin solder, and then sweating the tinned surfaces together.

  18. Raman Scattering from Tin

    DTIC Science & Technology

    2015-09-01

    ARL-TR-7448 ● SEP 2015 US Army Research Laboratory Raman Scattering from Tin by Patrick A Folkes, Patrick Taylor, Charles Rong...REPORT TYPE 3. DATES COVERED 00-00-2015 to 00-00-2015 4. TITLE AND SUBTITLE Raman Scattering from Tin 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c... tin as an analytical tool for discerning specific allotropic differences in ultra-thin tin films, and discerning differences between the tin and the

  19. Electrochemical mechanism of tin membrane electrodeposition under ultrasonic waves.

    PubMed

    Nan, Tianxiang; Yang, Jianguang; Chen, Bing

    2018-04-01

    Tin was electrodeposited from chloride solutions using a membrane cell under ultrasonic waves. Cyclic voltammetry (CV), linear sweep voltammetry (LSV), chronoamperometry (CHR), and chronopotentiometry were applied to investigate the electrochemical mechanism of tin electrodeposition under ultrasonic field. Chronoamperometry curves showed that the initial process of tin electrodeposition followed the diffusion controlled three-dimensional nucleation and grain growth mechanism. The analysis of the cyclic voltammetry and linear sweep voltammetry diagrams showed that the application of ultrasound can change the tin membrane electro-deposition reaction from diffusion to electrochemical control, and the optimum parameters for tin electrodeposition were H + concentration 3.5 mol·L -1 , temperature 35 °C and ultrasonic power 100 W. The coupling ultrasonic field played a role in refining the grain in this process. The growth of tin crystals showed no orientation preferential, and the tin deposition showed a tendency to form a regular network structure after ultrasonic coupling. While in the absence of ultrasonic coupling, the growth of tin crystals has a high preferential orientation, and the tin deposition showed a tendency to form tin whiskers. Ultrasonic coupling was more favorable for obtaining a more compact and smoother cathode tin layer. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. 42 CFR 425.306 - Participation agreement and exclusivity of ACO participant TINs.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... participant TINs. 425.306 Section 425.306 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT... participant TINs. (a) For purposes of the Shared Savings Program, each ACO participant TIN is required to commit to a participation agreement with CMS. (b) Each ACO participant TIN upon which beneficiary...

  1. 78 FR 16048 - Proposed Collection; Comment Request for e-Services Registration TIN Matching-Application and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-13

    ...-Services Registration TIN Matching--Application and Screens for TIN Matching Interactive AGENCY: Internal...(c)(2)(A)). Currently, the IRS is soliciting comments concerning e- Services registration TIN matching--application and screens for TIN matching interactive. DATES: Written comments should be received...

  2. 42 CFR 425.306 - Participation agreement and exclusivity of ACO participant TINs.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... participant TINs. 425.306 Section 425.306 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT... participant TINs. (a) For purposes of the Shared Savings Program, each ACO participant TIN is required to commit to a participation agreement with CMS. (b) Each ACO participant TIN upon which beneficiary...

  3. 75 FR 5854 - Proposed Collection; Comment Request for e-Services Registration TIN Matching-Application and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-04

    ...-Services Registration TIN Matching--Application and Screens for TIN Matching Interactive AGENCY: Internal...(c)(2)(A)). Currently, the IRS is soliciting comments concerning e- Services Registration TIN Matching--Application and Screens for TIN Matching Interactive. DATES: Written comments should be received...

  4. 42 CFR 425.306 - Participation agreement and exclusivity of ACO participant TINs.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... participant TINs. 425.306 Section 425.306 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT... participant TINs. (a) For purposes of the Shared Savings Program, each ACO participant TIN is required to commit to a participation agreement with CMS. (b) Each ACO participant TIN upon which beneficiary...

  5. Epigenetic lead, zinc, silver, antimony, tin, and gold veins in Boulder Basin, Blaine and Custer counties, Idaho; potential for economic tin mineralization

    USGS Publications Warehouse

    Ratchford, Michael E.

    2002-01-01

    Boulder Basin is in a northwest-trending belt of allochthonous Paleozoic rocks in the Boulder Mountains of central Idaho. Regional Tertiary extension resulted in widespread normal faulting and coeval emplacement of shallow-level intrusions and extrusive rocks of the Challis Volcanic Group. Epigenetic lead-zinc-silver-antimony-tin-gold vein deposits formed during Tertiary extension and are hosted within Paleozoic strata. The major orebodies are in the lower plate of the Boulder Basin thrust fault, in massive quartzite of the Middle Pennsylvanian to Lower Permian Wood River Formation. Anomalous concentrations of tin are present in the base-metal mineral assemblage of the Boulder Basin ore deposits. The tin-bearing veins in Boulder Basin are strikingly similar to Bolivian tin deposits. The deposit model for Bolivian tin deposits identifies buried tin porphyry below the tin-bearing vein system.

  6. 26 CFR 1.6050S-0 - Table of contents.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... penalties for failures to include a correct TIN. (i) In general. (ii) Acting in a responsible manner. (iii) Manner of soliciting TIN. (4) Failure to furnish TIN. (f) Effective date. § 1.6050S-2TElectronic... include a correct TIN. (i) In general. (ii) Acting in a responsible manner. (iii) Manner of soliciting TIN...

  7. 26 CFR 1.6050S-0 - Table of contents.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... penalties for failures to include a correct TIN. (i) In general. (ii) Acting in a responsible manner. (iii) Manner of soliciting TIN. (4) Failure to furnish TIN. (f) Effective date. § 1.6050S-2TElectronic... include a correct TIN. (i) In general. (ii) Acting in a responsible manner. (iii) Manner of soliciting TIN...

  8. 26 CFR 1.6050S-0 - Table of contents.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... penalties for failures to include a correct TIN. (i) In general. (ii) Acting in a responsible manner. (iii) Manner of soliciting TIN. (4) Failure to furnish TIN. (f) Effective date. § 1.6050S-2TElectronic... include a correct TIN. (i) In general. (ii) Acting in a responsible manner. (iii) Manner of soliciting TIN...

  9. 78 FR 39644 - Information Reporting for Affordable Insurance Exchanges

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-02

    ... Exchange-- (i) The name, address, and taxpayer identification number (TIN), or date of birth if a TIN is... advance credit payments (taxpayer), and the name and TIN of the individual's spouse, if applicable; (ii) The name, address, and TIN, or date of birth if a TIN is not available, of an adult enrolling in...

  10. 26 CFR 1.6050S-0 - Table of contents.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... penalties for failures to include a correct TIN. (i) In general. (ii) Acting in a responsible manner. (iii) Manner of soliciting TIN. (4) Failure to furnish TIN. (f) Effective date. § 1.6050S-2TElectronic... include a correct TIN. (i) In general. (ii) Acting in a responsible manner. (iii) Manner of soliciting TIN...

  11. 26 CFR 1.6050S-0 - Table of contents.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... penalties for failures to include a correct TIN. (i) In general. (ii) Acting in a responsible manner. (iii) Manner of soliciting TIN. (4) Failure to furnish TIN. (f) Effective date. § 1.6050S-2TElectronic... include a correct TIN. (i) In general. (ii) Acting in a responsible manner. (iii) Manner of soliciting TIN...

  12. The prognostic value of tumor-infiltrating neutrophils in gastric adenocarcinoma after resection.

    PubMed

    Zhao, Jing-jing; Pan, Ke; Wang, Wei; Chen, Ju-gao; Wu, Yan-heng; Lv, Lin; Li, Jian-jun; Chen, Yi-bing; Wang, Dan-dan; Pan, Qiu-zhong; Li, Xiao-dong; Xia, Jian-chuan

    2012-01-01

    Several pieces of evidence indicate that tumor-infiltrating neutrophils (TINs) are correlated to tumor progression. In the current study, we explore the relationship between TINs and clinicopathological features of gastric adenocarcinoma patients. Furthermore, we investigated the prognostic value of TINs. The study was comprised of two groups, training group (115 patients) and test group (97 patients). Biomarkers (intratumoral CD15+ neutrophils) were assessed by immunohistochemistry. The relationship between clinicopathological features and patient outcome were evaluated using Cox regression and Kaplan-Meier analysis. Immunohistochemical detection showed that the tumor-infiltrating neutrophils (TINs) in the training group ranged from 0.00-115.70 cells/high-power microscopic field (HPF) and the median number was 21.60 cells/HPF. Based on the median number, the patients were divided into high and low TINs groups. Chi-square test analysis revealed that the density of CD15+ TINs was positively associated with lymph node metastasis (p = 0.024), distance metastasis (p = 0.004) and UICC (International Union Against Cancer) staging (p = 0.028). Kaplan-Meier analysis showed that patients with a lower density of TINs had a better prognosis than patients with a higher density of TINs (p = 0.002). Multivariate Cox's analysis showed that the density of CD15+ TINs was an independent prognostic factor for overall survival of gastric adenocarcinoma patients. Using another 97 patients as a test group and basing on the median number of TINs (21.60 cells/HPF) coming from the training group, Kaplan-Meier analysis also showed that patients with a lower density of TINs had a better prognosis than patients with a higher density of TINs (p = 0.032). The results verify that the number of CD15+ TINs can predict the survival of gastric adenocarcinoma surgical patients. The presence of CD15+ TINs is an independent and unfavorable factor in the prognosis of gastric adenocarcinoma patients. Targeting CD15+ TINs may be a potential intervenient therapy in the future.

  13. Evaluation of the suitability of tin slag in cementitious materials: Mechanical properties and Leaching behaviour

    NASA Astrophysics Data System (ADS)

    Rustandi, Andi; Wafa' Nawawi, Fuad; Pratesa, Yudha; Cahyadi, Agung

    2018-01-01

    Tin slag, a by-product of tin production has been used in cementitious application. The present investigation focuses on the suitability of tin slag as primary component in cement and as component that substitute some amount of Portland Cement. The tin slags studied were taken from Bangka, Indonesia. The main contents of the tin slag are SiO2, Al2O3, and Fe2O3 according to the XRF investigation. The aim of this article was to study the mechanical behaviour (compressive strength), microstructure and leaching behaviour of tin slag blended cement. This study used air-cooled tin slag that had been passed through 400# sieve to replace Portland Cement with ratio 0, 10, 20, 30, 40 by weight. Cement pastes and tin slag blended cement pastes were prepared by using water/cement ratio (W/C) of 0.40 by weight and hydrated for various curing ages of 3, 7, 14 days The microstructure of the raw tin slag was investigated using Scanning Electron Microscope (SEM). The phase composition of each cement paste was investigated using X-ray Diffraction (XRD). The aim of the leachability test was to investigate the environmental impacts of tin slag blended cement product in the range 4-8 pH by using static pH-dependent leaching test. The result show that the increase of the tin slag content decreasing the mortar compressive strength at early ages. The use of tin slag in cement provide economic benefits for all related industries.

  14. Electronic and Optical Properties of Titanium Nitride Bulk and Surfaces from First Principles Calculations (Postprint)

    DTIC Science & Technology

    2015-11-18

    thickness of the film, or substrate. In this work, we report calculations for titanium nitride ( TiN ), a promising material for plasmonic applications...stoichiometric bulk TiN , as well as of the TiN (100), TiN (110), and TiN (111) outermost surfaces. Density functional theory (DFT) and many-body GW methods...and the band structure for bulk TiN were shown to be consistent with previous work. Calculated dielectric functions, plasma frequencies, reflectivity

  15. 76 FR 38129 - Applications for New Awards; Americans With Disabilities Act (ADA) National Network Knowledge...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-29

    ...) number and a Taxpayer Identification Number (TIN); b. Register both your DUNS number and TIN with the... number and TIN on your application; and d. Maintain an active CCR registration with current information... a TIN from the Internal Revenue Service. If you are an individual, you can obtain a TIN from the...

  16. 77 FR 40596 - Applications for New Awards: Disability and Rehabilitation Research Projects and Centers Program...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-10

    ...) number and a Taxpayer Identification Number (TIN); b. Register both your DUNS number and TIN with the... number and TIN on your application; and d. Maintain an active CCR registration with current information... a TIN from the Internal Revenue Service. If you are an individual, you can obtain a TIN from the...

  17. The Southeast Asian Tin Belt

    NASA Astrophysics Data System (ADS)

    Schwartz, M. O.; Rajah, S. S.; Askury, A. K.; Putthapiban, P.; Djaswadi, S.

    1995-07-01

    The Southeast Asian Tin Belt is a north-south elongate zone 2800 km long and 400 km wide, extending from Burma (Myanmar) and Thailand to Peninsular Malaysia and the Indonesian Tin Islands. Altogether 9.6 million tonnes of tin, equivalent to 54% of the world's tin production is derived from this region. Most of the granitoids in the region can be grouped geographically into elongate provinces or belts, based on petrographic and geochronological features. - The Main Range Granitoid Province in western Peninsular Malaysia, southern Peninsular Thailand and central Thailand is almost entirely made up of biotite granite (184-230 Ma). Tin deposits associated with these granites contributed 55% of the historic tin production of Southeast Asia. - The Northern Granitoid Province in northern Thailand (0.1% of tin production) also has dominant biotite granite (200-269 Ma) but it is distinguished by abundant post-intrusion deformation. - The Eastern Granitoid Province extends from eastern Peninsular Malaysia to eastern Thailand. The Malaysian part is subdivided into the East Coast Belt (220-263 Ma), Boundary Range Belt (197-257 Ma) and Central Belt (79-219 Ma). The granitoids cover a wide compositional range from biotite granite to hornblende-biotite granite/granodiorite and diorite-gabbro. Tin deposits are associated with biotite granite in the East Coast Belt (3% of tin production). The granitoids in the other areas of the Eastern Granitoid Province are barren. - The Western Granitoid Province (22-149 Ma) in northern Peninsular Thailand, western Thailand and Burma has biotite granite and hornblende-biotite granite/granodiorite. Tin deposits are associated with biotite granite, which probably is the dominant phase (14% of tin production). The granitoids of the Indonesian Tin Islands (193-251 Ma) do not permit grouping into geographically distinct units. Main Range-type and Eastern Province-type plutons occur next to each other. Most of the tin deposits are associated with Main Range-type plutons (28% of tin production). Tin-mineralized plutons are characterized by high concentrations of SiO 2, K 2O, Rb, Sn, Th and U, whereas the concentrations of Fe 2O 3, MgO, CaO, Na 2O, Ba and Sr as well as the Fe2O3/FeO ratios are low. Tin-mineralized plutons are also distinguished by high initial 87Sr/86Sr ratios low magnetic susceptibilities.

  18. Mineral resource of the month: tin

    USGS Publications Warehouse

    Carlin, James F.

    2011-01-01

    Tin was one of the earliest-known metals. Because of its hardening effect on copper, tin was used in bronze implements as early as 3500 B.C. Bronze, a copper-tin alloy that can be sharpened and is hard enough to retain a cutting edge, was used during the Bronze Age in construction tools as well as weapons for hunting and war. The geographical separation between tin-producing and tin-consuming nations greatly influenced the patterns of early trade routes. Historians think that as early as 1500 B.C., Phoenicians traveled by sea to the Cornwall district of England to obtain tin. The pure metal was not used unalloyed until about 600 B.C.

  19. Tin recycling in the United States in 1998

    USGS Publications Warehouse

    Carlin, James F.

    2001-01-01

    This materials flow study includes a description of tin supply and demand factors for the United States to illustrate the extent of tin recycling and to identify recycling trends. Understanding the flow of materials from source to ultimate disposition can assist in improving the management of the use of natural resources in a manner that is compatible with sound environmental practices. The quantity of tin recycled in 1998 as a percentage of apparent tin supply was estimated to be about 22%, and recycling efficiency was estimated to be 75%. Of the total tin consumed in products for the U.S. market in 1998, an estimated 12% was consumed in products where the tin was not recyclable (dissipative uses).

  20. 76 FR 28426 - Applications for New Awards; Assistive Technology Act of 1998, as Amended (AT Act)-National...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-17

    ... (DUNS) number and a Taxpayer Identification Number (TIN); b. Register both your DUNS number and TIN with... DUNS number and TIN on your application; and d. Maintain an active CCR registration with current... obtain a TIN from the Internal Revenue Service. If you are an individual, you can obtain a TIN from the...

  1. 31 CFR 351.43 - Are taxpayer identification numbers (TINs) required for the registration of a definitive Series...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (TINs) required for the registration of a definitive Series EE savings bond? 351.43 Section 351.43 Money... Definitive Series EE Savings Bonds § 351.43 Are taxpayer identification numbers (TINs) required for the... must include the TIN of the owner or first-named coowner. The TIN of the second-named coowner or...

  2. 78 FR 42937 - Applications for New Awards; National Institute on Disability and Rehabilitation Research...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-18

    ... Number (TIN); b. Register both your DUNS number and TIN with the System for Award Management (SAM... your DUNS number and TIN on your application; and d. Maintain an active SAM registration with current... obtain a TIN from the Internal Revenue Service. If you are an individual, you can obtain a TIN from the...

  3. 77 FR 11190 - Yokohama Tire Company, Denial of Petition for Decision of Inconsequential Noncompliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-24

    ... (TIN)/partial TIN required by paragraph S5.5.1 on one of the tire sidewalls. YTC indicates that the noncompliant tires do however include the full TIN on the intended outboard sidewall. YTC argues that the TIN and the partial TIN are used to properly identify tires that are involved in a safety campaign. YTC...

  4. 26 CFR 31.3406(g)-1 - Exception for payments to certain payees and certain other payments.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... payee's TIN and the payee's TIN has been validated through the IRS TIN Matching Program; or (B) The QPCA... not constitute notice by the IRS that the payee's TIN is incorrect for purposes of section 3406(a)(1....) At the time of enrollment, Q obtains Merchant X's taxpayer identification number (TIN). Merchant X is...

  5. 31 CFR 351.43 - Are taxpayer identification numbers (TINs) required for the registration of a definitive Series...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (TINs) required for the registration of a definitive Series EE savings bond? 351.43 Section 351.43 Money... Definitive Series EE Savings Bonds § 351.43 Are taxpayer identification numbers (TINs) required for the... must include the TIN of the owner or first-named coowner. The TIN of the second-named coowner or...

  6. 31 CFR 351.43 - Are taxpayer identification numbers (TINs) required for the registration of a definitive Series...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (TINs) required for the registration of a definitive Series EE savings bond? 351.43 Section 351.43 Money... Definitive Series EE Savings Bonds § 351.43 Are taxpayer identification numbers (TINs) required for the... must include the TIN of the owner or first-named coowner. The TIN of the second-named coowner or...

  7. 78 FR 36755 - Applications for New Awards; National Institute on Disability and Rehabilitation Research...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-19

    ... Identification Number (TIN); b. Register both your DUNS number and TIN with the System for Award Management (SAM... your DUNS number and TIN on your application; and d. Maintain an active SAM registration with current... obtain a TIN from the Internal Revenue Service. If you are an individual, you can obtain a TIN from the...

  8. 78 FR 38958 - Applications for New Awards; National Institute on Disability and Rehabilitation Research...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-28

    ... Number (TIN); b. Register both your DUNS number and TIN with the System for Award Management (SAM... your DUNS number and TIN on your application; and d. Maintain an active SAM registration with current... obtain a TIN from the Internal Revenue Service. If you are an individual, you can obtain a TIN from the...

  9. 31 CFR 351.43 - Are taxpayer identification numbers (TINs) required for the registration of a definitive Series...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (TINs) required for the registration of a definitive Series EE savings bond? 351.43 Section 351.43 Money... Definitive Series EE Savings Bonds § 351.43 Are taxpayer identification numbers (TINs) required for the... must include the TIN of the owner or first-named coowner. The TIN of the second-named coowner or...

  10. 31 CFR 351.43 - Are taxpayer identification numbers (TINs) required for the registration of a definitive Series...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (TINs) required for the registration of a definitive Series EE savings bond? 351.43 Section 351.43 Money... Definitive Series EE Savings Bonds § 351.43 Are taxpayer identification numbers (TINs) required for the... must include the TIN of the owner or first-named coowner. The TIN of the second-named coowner or...

  11. Reductive spectrophotometry of divalent tin sensitization on soda lime glass

    NASA Astrophysics Data System (ADS)

    Bejugam, Vinith; Wei, Xingfei; Roper, D. Keith

    2016-07-01

    Rapid and facile evaluation of tin (II) sensitization could lead to improved understanding of metal deposition in electroless (EL) plating. This report used a balanced redox reaction between 3,3‧,5,5‧-tetramethylbenzidine dihydrochloride (TMB-HCL) and N-bromosuccinimide (NBS) to evaluate effects of sensitization conditions (i.e., sensitization time, analyte concentration, aqueous immersion, and acid content) on the accumulated mass of surface-associated divalent tin ion. The accumulated mass of tin (II) increased as the sensitization time increased up to 30 s in proportion to aqueous tin (II) chloride concentrations between 2.6 and 26 mM at a trifluoroacetic acid (TFA) content of 68 mM. The average mass peaked at 7.3 nanomoles (nmol) per cm2 after a 5 s aqueous immersion post-sensitization, and then decreased with increasing aqueous immersion post-sensitization. The total average tin (II) + tin (IV) accumulated on soda lime glass measured by inductively coupled plasma optical emission spectrometry (ICP-OES) was 17% higher at 30 s sensitization, suggesting a fraction of the tin (II) present may have oxidized to tin (IV). These results indicated that in situ spectrophotometric evaluation of tin (II) could support development of EL plating for electronics, catalysis, and solar cells.

  12. Corrosion Behavior of Carbon Steel in Concrete Material Composed of Tin Slag Waste in Aqueous Chloride Solution

    NASA Astrophysics Data System (ADS)

    Rustandi, Andi; Cahyadi, Agung; Taruli Siallagan, Sonia; Wafa' Nawawi, Fuad; Pratesa, Yudha

    2018-01-01

    Tin slag is a byproduct of tin ore smelting process which is rarely utilized. The main purpose of this work is to investigate the use of tin slag for concrete cement material application compared to the industrial Ordinary Portland Cement (OPC). Tin slag composition was characterized by XRD and XRF analysis. The characterization results showed the similar chemical composition of tin slag and OPC. It also revealed the semi crystalline structure of tin slag sample. Several electrochemical tests were performed to evaluate corrosion behavior of tin slag, OPC and various mixed composition of both materials and the addition of CaO. The corrosion behavior of OPC and tin slag were evaluated by using Cyclic Polarization, Electrochemical Impedance Spectroscopy (EIS) and Electrochemical Frequency Modulation (EFM) methods. Aqueous sodium chloride (NaCl) solution with 3.5% w.t concentration which similar to seawater was used as the electrolyte in this work. The steel specimen used as the reinforce bar (rebar) material of the concrete was carbon steel AISI 1045. The rebar was embedded in the concrete cement which composed of OPC and the various composition of tin slag including slag without addition of CaO and slag mixed with addition of 50 % CaO. The electrochemical tests results revealed that tin slag affected its corrosion behavior which becoming more active and increasing the corrosion rate as well as decreasing the electrochemical impedance.

  13. Low temperature processed complementary metal oxide semiconductor (CMOS) device by oxidation effect from capping layer.

    PubMed

    Wang, Zhenwei; Al-Jawhari, Hala A; Nayak, Pradipta K; Caraveo-Frescas, J A; Wei, Nini; Hedhili, M N; Alshareef, H N

    2015-04-20

    In this report, both p- and n-type tin oxide thin-film transistors (TFTs) were simultaneously achieved using single-step deposition of the tin oxide channel layer. The tuning of charge carrier polarity in the tin oxide channel is achieved by selectively depositing a copper oxide capping layer on top of tin oxide, which serves as an oxygen source, providing additional oxygen to form an n-type tin dioxide phase. The oxidation process can be realized by annealing at temperature as low as 190 °C in air, which is significantly lower than the temperature generally required to form tin dioxide. Based on this approach, CMOS inverters based entirely on tin oxide TFTs were fabricated. Our method provides a solution to lower the process temperature for tin dioxide phase, which facilitates the application of this transparent oxide semiconductor in emerging electronic devices field.

  14. Corrosion resistance and mechanical properties of titanium nitride plating on orthodontic wires.

    PubMed

    Sugisawa, Haruki; Kitaura, Hideki; Ueda, Kyosuke; Kimura, Keisuke; Ishida, Masahiko; Ochi, Yumiko; Kishikawa, Akiko; Ogawa, Saika; Takano-Yamamoto, Teruko

    2018-03-30

    Titanium nitride (TiN) coating by ion plating has properties such as high hardness, wear resistance, corrosion resistance, and surface lubricity, therefore TiN coating is often used in various dental appliances and materials. In this study, we evaluated the corrosion behaviors and mechanical properties of TiN coated stainless steel (SS) and nickel titanium (Ni-Ti) orthodontic wires prepared by ion plating. TiN coating by ion plating improves the corrosion resistance of orthodontic wires. The corrosion pitting of the TiN coated wire surface become small. The tensile strength and stiffness of SS wire were increased after TiN coating. In contrast, its elastic force, which is a property for Ni-Ti wire, was decreased. In addition, TiN coating provided small friction forces. The low level of friction may increase tooth movement efficiently. Therefore, TiN coated SS wire could be useful for orthodontics treatment.

  15. Low Temperature Processed Complementary Metal Oxide Semiconductor (CMOS) Device by Oxidation Effect from Capping Layer

    PubMed Central

    Wang, Zhenwei; Al-Jawhari, Hala A.; Nayak, Pradipta K.; Caraveo-Frescas, J. A.; Wei, Nini; Hedhili, M. N.; Alshareef, H. N.

    2015-01-01

    In this report, both p- and n-type tin oxide thin-film transistors (TFTs) were simultaneously achieved using single-step deposition of the tin oxide channel layer. The tuning of charge carrier polarity in the tin oxide channel is achieved by selectively depositing a copper oxide capping layer on top of tin oxide, which serves as an oxygen source, providing additional oxygen to form an n-type tin dioxide phase. The oxidation process can be realized by annealing at temperature as low as 190°C in air, which is significantly lower than the temperature generally required to form tin dioxide. Based on this approach, CMOS inverters based entirely on tin oxide TFTs were fabricated. Our method provides a solution to lower the process temperature for tin dioxide phase, which facilitates the application of this transparent oxide semiconductor in emerging electronic devices field. PMID:25892711

  16. The Prognostic Value of Tumor-Infiltrating Neutrophils in Gastric Adenocarcinoma after Resection

    PubMed Central

    Wang, Wei; Chen, Ju-gao; Wu, Yan-heng; Lv, Lin; Li, Jian-jun; Chen, Yi-bing; Wang, Dan-dan; Pan, Qiu-zhong; Li, Xiao-dong; Xia, Jian-chuan

    2012-01-01

    Background Several pieces of evidence indicate that tumor-infiltrating neutrophils (TINs) are correlated to tumor progression. In the current study, we explore the relationship between TINs and clinicopathological features of gastric adenocarcinoma patients. Furthermore, we investigated the prognostic value of TINs. Patients and Methods The study was comprised of two groups, training group (115 patients) and test group (97 patients). Biomarkers (intratumoral CD15+ neutrophils) were assessed by immunohistochemistry. The relationship between clinicopathological features and patient outcome were evaluated using Cox regression and Kaplan-Meier analysis. Results Immunohistochemical detection showed that the tumor-infiltrating neutrophils (TINs) in the training group ranged from 0.00–115.70 cells/high-power microscopic field (HPF) and the median number was 21.60 cells/HPF. Based on the median number, the patients were divided into high and low TINs groups. Chi-square test analysis revealed that the density of CD15+ TINs was positively associated with lymph node metastasis (p = 0.024), distance metastasis (p = 0.004) and UICC (International Union Against Cancer) staging (p = 0.028). Kaplan-Meier analysis showed that patients with a lower density of TINs had a better prognosis than patients with a higher density of TINs (p = 0.002). Multivariate Cox's analysis showed that the density of CD15+ TINs was an independent prognostic factor for overall survival of gastric adenocarcinoma patients. Using another 97 patients as a test group and basing on the median number of TINs (21.60 cells/HPF) coming from the training group, Kaplan-Meier analysis also showed that patients with a lower density of TINs had a better prognosis than patients with a higher density of TINs (p = 0.032). The results verify that the number of CD15+ TINs can predict the survival of gastric adenocarcinoma surgical patients. Conclusions The presence of CD15+ TINs is an independent and unfavorable factor in the prognosis of gastric adenocarcinoma patients. Targeting CD15+ TINs may be a potential intervenient therapy in the future. PMID:22442706

  17. Canopy architectural and physiological characterization of near-isogenic wheat lines differing in the tiller inhibition gene tin.

    PubMed

    Moeller, Carina; Evers, Jochem B; Rebetzke, Greg

    2014-01-01

    Tillering is a core constituent of plant architecture, and influences light interception to affect plant and crop performance. Near-isogenic lines (NILs) varying for a tiller inhibition (tin) gene and representing two genetic backgrounds were investigated for tillering dynamics, organ size distribution, leaf area, light interception, red: far-red ratio, and chlorophyll content. Tillering ceased earlier in the tin lines to reduce the frequencies of later primary and secondary tillers compared to the free-tillering NILs, and demonstrated the genetically lower tillering plasticity of tin-containing lines. The distribution of organ sizes along shoots varied between NILs contrasting for tin. Internode elongation commenced at a lower phytomer, and the peduncle was shorter in the tin lines. The flag leaves of tin lines were larger, and the longest leaf blades were observed at higher phytomers in the tin than in free-tillering lines. Total leaf area was reduced in tin lines, and non-tin lines invested more leaf area at mid-canopy height. The tiller economy (ratio of seed-bearing shoots to numbers of shoots produced) was 10% greater in the tin lines (0.73-0.76) compared to the free-tillering sisters (0.62-0.63). At maximum tiller number, the red: far-red ratio (light quality stimulus that is thought to induce the cessation of tillering) at the plant-base was 0.18-0.22 in tin lines and 0.09-0.11 in free-tillering lines at levels of photosynthetic active radiation of 49-53% and 30-33%, respectively. The tin lines intercepted less radiation compared to their free-tillering sisters once genotypic differences in tiller numbers had established, and maintained green leaf area in the lower canopy later into the season. Greater light extinction coefficients (k) in tin lines prior to, but reduced k after, spike emergence indicated that differences in light interception between NILs contrasting in tin cannot be explained by leaf area alone but that geometric and optical canopy properties contributed. The careful characterization of specifically-developed NILs is refining the development of a physiology-based model for tillering to improve understanding of the value of architectural traits for use in cereal improvement.

  18. Tumor-infiltrating neutrophils predict benefit from adjuvant chemotherapy in patients with muscle invasive bladder cancer.

    PubMed

    Zhou, Lin; Xu, Le; Chen, Lingli; Fu, Qiang; Liu, Zheng; Chang, Yuan; Lin, Zongming; Xu, Jiejie

    2017-01-01

    Growing evidence shows tumor-infiltrating neutrophils (TINs) involvement in tumorigenesis. The objective of this study is to assess the prognostic effect of TINs and its impact on adjuvant chemotherapy benefits in muscle invasive bladder cancer (MIBC). A total of 142 MIBC patients from Zhongshan Hospital, 119 MIBC patients from FUSCC, and 405 MIBC patients from TCGA cohort were enrolled in the study. TINs were evaluated by immunohistochemical staining of CD66b or the CIBERSORT method. Patients with high TINs had a significantly poorer overall survival ( p = 0.001, p < 0.001, and p = 0.002, respectively) in the three sets. In the multivariate analysis, the presence of high TINs (HR = 2.122, p = 0.007; HR = 3.807, p < 0.001; HR = 2.104, p = 0.001; respectively) was identified as an independent prognostic factor for overall survival in the three sets. More importantly, Low TINs patients had significantly longer overall survival in patients without ACT in the three sets. Gene set enrichment analysis showed that lymphocyte activation ( p < 0.001) and T cell activation ( p = 0.008) were significantly enriched in the low TINs group. In addition, TINs were negatively correlated with CD8 + T cells, suggesting that the status of high-TINs was linked to the status of immunosuppression in MIBC. TINs could be used as independent prognostic factor. Low TINs identified a subgroup of MIBC patients who appeared to benefit from adjuvant chemotherapy. Incorporation of TINs into TNM system could further stratify patients with different prognosis.

  19. Tumor-infiltrating neutrophils predict benefit from adjuvant chemotherapy in patients with muscle invasive bladder cancer

    PubMed Central

    Zhou, Lin; Xu, Le; Chen, Lingli; Fu, Qiang; Liu, Zheng; Chang, Yuan; Lin, Zongming; Xu, Jiejie

    2017-01-01

    ABSTRACT Growing evidence shows tumor-infiltrating neutrophils (TINs) involvement in tumorigenesis. The objective of this study is to assess the prognostic effect of TINs and its impact on adjuvant chemotherapy benefits in muscle invasive bladder cancer (MIBC). A total of 142 MIBC patients from Zhongshan Hospital, 119 MIBC patients from FUSCC, and 405 MIBC patients from TCGA cohort were enrolled in the study. TINs were evaluated by immunohistochemical staining of CD66b or the CIBERSORT method. Patients with high TINs had a significantly poorer overall survival (p = 0.001, p < 0.001, and p = 0.002, respectively) in the three sets. In the multivariate analysis, the presence of high TINs (HR = 2.122, p = 0.007; HR = 3.807, p < 0.001; HR = 2.104, p = 0.001; respectively) was identified as an independent prognostic factor for overall survival in the three sets. More importantly, Low TINs patients had significantly longer overall survival in patients without ACT in the three sets. Gene set enrichment analysis showed that lymphocyte activation (p < 0.001) and T cell activation (p = 0.008) were significantly enriched in the low TINs group. In addition, TINs were negatively correlated with CD8+ T cells, suggesting that the status of high-TINs was linked to the status of immunosuppression in MIBC. TINs could be used as independent prognostic factor. Low TINs identified a subgroup of MIBC patients who appeared to benefit from adjuvant chemotherapy. Incorporation of TINs into TNM system could further stratify patients with different prognosis. PMID:28507798

  20. A comparative study of fine polished stainless steel, TiN and TiN/Ag surfaces: adhesion and attachment strength of Listeria monocytogenes as well as anti-listerial effect.

    PubMed

    Skovager, Anne; Whitehead, Kathryn; Wickens, David; Verran, Joanna; Ingmer, Hanne; Arneborg, Nils

    2013-09-01

    Magnetron sputtering was used to produce nanocomposite TiN and TiN/Ag coatings on stainless steel surfaces. The surface chemistry (EDX), physicochemical properties (contact angles), topography and roughness parameters (WLP and AFM) of the fine polished stainless steel (FPSS), TiN and TiN/8.6 at.% Ag surfaces were examined. Real-time initial adhesion of two Listeria monocytogenes strains (EGDe and 64) to the three surfaces was determined under flow conditions, and their attachment strength after adhesion was measured using atomic force microscopy (AFM). The anti-listerial properties of the surfaces were determined using LIVE/DEAD staining. Our results demonstrate that FPSS, TiN and TiN/8.6 at.% Ag possessed different surface properties, which may influence both attachment strength and anti-listerial properties. There were no significant (p>0.05) differences in the initial adhesion of the two L. monocytogenes strains to the three different surfaces. Attachment studies showed that the two L. monocytogenes strains did not attach to FPSS under wetted conditions. However, both strains attached to TiN and TiN/8.6 at.% Ag surfaces, although with less strength to TiN/8.6 at.% Ag than to TiN surfaces. The TiN/8.6 at.% Ag surface showed marked anti-listerial properties as compared with FPSS and TiN. Initial adhesion, attachment strength and anti-listerial properties were found to be strain dependent. Copyright © 2013 Elsevier B.V. All rights reserved.

  1. Tin recovery from tin slag using electrolysis method

    NASA Astrophysics Data System (ADS)

    Jumari, Arif; Purwanto, Agus; Nur, Adrian; Budiman, Annata Wahyu; Lerian, Metty; Paramita, Fransisca A.

    2018-02-01

    The process in industry, including in mining industry, would surely give negative effect such as waste polluting to the environment. Some of waste could be potentially reutilized to be a commodity with the higher economic value. Tin slag is one of them. The aim of this research was to recover the tin contained in tin slag. Before coming to the electrolysis, tin slag must be treated by dissolution. The grinded tin slag was dissolved into HCl solution to form a slurry. During dissolution, the slurry was agitated and heated, and finally filtered. The filtrate obtained was then electrolyzed. During the process of electrolysis, solid material precipitated on the used cathode. The precipitated solid was then separated and dried. The solid was then analyzed using XRD, XRF and SEM. The XRD analysis showed that the longest time of dissolution and electrolysis the highest the purity obtained in the product. The SEM analysis showed that the longest time of electrolysis the smallest tin particle obtained. Optimum time achieved in this research was 2 hours for the recovering time and 3 hours for the electrolysis time, with 9% tin recovered.

  2. Transcription instability in high-risk neuroblastoma is associated with a global perturbation of chromatin domains.

    PubMed

    Zanon, Carlo; Tonini, Gian Paolo

    2017-11-01

    Chromosome instability has a pivotal role among the hallmarks of cancer, but its transcriptional counterpart is rarely considered a relevant factor in cell destabilization. To examine transcription instability (TIN), we first devised a metric we named TIN index and used it to evaluate TIN on a dataset containing more than 500 neuroblastoma samples. We found that metastatic tumors from high-risk (HR) patients are characterized by significantly different TIN index values compared to low/intermediate-risk patients. Our results indicate that the TIN index is a good predictor of neuroblastoma patient's outcome, and a related TIN index gene signature (TIN-signature) is also able to predict the neuroblastoma patient's outcome with high confidence. Interestingly, we find that TIN-signature genes have a strong positional association with superenhancers in neuroblastoma tumors. Finally, we show that TIN is linked to chromatin structural domains and interferes with their integrity in HR neuroblastoma patients. This novel approach to gene expression analysis broadens the perspective of genome instability investigations to include functional aspects. © 2017 The Authors. Published by FEBS Press and John Wiley & Sons Ltd.

  3. Mineral of the month: tin

    USGS Publications Warehouse

    Carlin, James F.

    2005-01-01

    Tin was one of the first metals discovered by humans and, like most metals, tin is rarely used by itself. Most tin is used as a protective coating or as an alloy with other metals in a diverse range of commercial and defense applications.

  4. Superlative TINs

    NASA Technical Reports Server (NTRS)

    Chamberlin, R.

    2002-01-01

    TIN is short for 'triangulated irregular network,' which is a piecewise planar model of a surface. If properly constructed, a TIN can be more than 30 times as efficient as a regular triangulation. In our project (a ground combat simulation to support U.S. Army training exercises), the TIN is used to represent the Earth's surface and is used primarily to determine whether line of sight is blocked by terrain. High efficiency requires accurate identification of ridgelines with as few triangles as possible. The work currently in progress is the implementation of a TINning process that we hope will produce superlative TINs. This presentation describes that process.

  5. Tin whiskers in electronic circuits

    NASA Astrophysics Data System (ADS)

    Stupian, Gary W.

    1992-12-01

    Fibrous, conducting 'whiskers' often grow on pure tin plating. These tin whiskers have, for many years, been known to pose a reliability problem in electronic circuitry; therefore, the use of pure tin coatings in any critical electronic application is not recommended. Despite the warnings of the experts, tin plating is still found on electronic and mechanical components and problems with whiskers still arise. This document summarizes what is known about the growth of tin whiskers. A number of factors (e.g., coating thickness, plating conditions) are thought to be important in determining whether whiskers will grow. Although tin whiskers have been investigated from some decades, there is still disagreement on the effects of virtually every coating parameter. There is no disagreement, however, on the essential fact that it is very difficult to predict with certainty whether whiskers will grow on any specific tin-plated component, which of course is the basis of the 'experts' advice not to use pure tin plating. If tin-plated components are found in an electronic system, replacement is the safest policy. Some additional recommendations to minimize risk are presented here that may be of use in situations in which replacement of all suspect components is not the option of choice because of cost or schedule constraints.

  6. Friction and wear of tin and tin alloys from minus 100 C to 150 C

    NASA Technical Reports Server (NTRS)

    Buckley, D. H.

    1975-01-01

    Sliding friction experiments were conducted with an iron (110) single-crystal pin sliding on single and polycrystalline tin and tin alloys. Specimens were examined at various ambient temperatures from -100 to 150 C. Applied loads varied from 1 to 50 grams, and sliding velocity was constant at 0.7 mm/min. Results indicate that the crystal transformation of tin influences the friction coefficient. Friction was higher for the diamond structure (gray tin) than it was for the body-centered tetragonal structure (white tin). Bismuth arrested the crystal transformation, which resulted in constant friction over the temperature range -100 to 150 C. Both copper and aluminum enhanced the kinetics of transformation, with aluminum producing a nearly twofold change in friction with the crystal transformation.

  7. A review of tin oxide-based catalytic systems: Preparation, characterization and catalytic behavior

    NASA Technical Reports Server (NTRS)

    Hoflund, Gar B.

    1987-01-01

    This paper reviews the important aspects of the preparation, characterization and catalytic behavior of tin oxide-based catalytic systems including doped tin oxide, mixed oxides which contain tin oxide, Pt supported on tin oxide and Pt/Sn supported on alumina. These systems have a broad range of applications and are continually increasing in importance. However, due to their complex nature, much remains to be understood concerning how they function catalytically.

  8. Contributions of Stress and Oxidation on the Formation of Whiskers in Pb-free Solders

    DTIC Science & Technology

    2016-01-29

    environmental factors influencing formation of tin whiskers on electrodeposited lead free, tin coatings over copper (or copper containing) substrates is the...Oxidation on the Formation of Whiskers in Pb‐free Solders,” WP-1754 15. SUBJECT TERMS Tin Whiskers, Residual Stress, Environmental Degradation 16...showing the surface of a tin film with whisker .................... 2 Figure 2: SEM Micrograph of Tin film on Copper Substrate cross-sectioned by FIB

  9. 48 CFR 204.7202-3 - TINs.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false TINs. 204.7202-3 Section... OF DEFENSE GENERAL ADMINISTRATIVE MATTERS Contractor Identification 204.7202-3 TINs. Requirements for use of TINs are in FAR subpart 4.9. [64 FR 43100, Aug. 9, 1999] ...

  10. 40 CFR 421.296 - Pretreatment standards for new sources.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... GUIDELINES AND STANDARDS NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY Secondary Tin Subcategory... wastewater pollutants in secondary tin process wastewater introduced into a POTW shall not exceed the following values: (a) Tin smelter SO2 scrubber. PSNS for the Secondary Tin Subcategory Pollutant or...

  11. 48 CFR 204.7202-3 - TINs.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false TINs. 204.7202-3 Section... OF DEFENSE GENERAL ADMINISTRATIVE MATTERS Contractor Identification 204.7202-3 TINs. Requirements for use of TINs are in FAR subpart 4.9. [64 FR 43100, Aug. 9, 1999] ...

  12. 40 CFR 421.296 - Pretreatment standards for new sources.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... GUIDELINES AND STANDARDS NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY Secondary Tin Subcategory... wastewater pollutants in secondary tin process wastewater introduced into a POTW shall not exceed the following values: (a) Tin smelter SO2 scrubber. PSNS for the Secondary Tin Subcategory Pollutant or...

  13. 48 CFR 204.7202-3 - TINs.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false TINs. 204.7202-3 Section... OF DEFENSE GENERAL ADMINISTRATIVE MATTERS Contractor Identification 204.7202-3 TINs. Requirements for use of TINs are in FAR subpart 4.9. [64 FR 43100, Aug. 9, 1999] ...

  14. 40 CFR 421.296 - Pretreatment standards for new sources.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... GUIDELINES AND STANDARDS NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY Secondary Tin Subcategory... wastewater pollutants in secondary tin process wastewater introduced into a POTW shall not exceed the following values: (a) Tin smelter SO2 scrubber. PSNS for the Secondary Tin Subcategory Pollutant or...

  15. 40 CFR 421.296 - Pretreatment standards for new sources.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... GUIDELINES AND STANDARDS NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY Secondary Tin Subcategory... wastewater pollutants in secondary tin process wastewater introduced into a POTW shall not exceed the following values: (a) Tin smelter SO2 scrubber. PSNS for the Secondary Tin Subcategory Pollutant or...

  16. 40 CFR 421.296 - Pretreatment standards for new sources.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... GUIDELINES AND STANDARDS NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY Secondary Tin Subcategory... wastewater pollutants in secondary tin process wastewater introduced into a POTW shall not exceed the following values: (a) Tin smelter SO2 scrubber. PSNS for the Secondary Tin Subcategory Pollutant or...

  17. 48 CFR 204.7202-3 - TINs.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false TINs. 204.7202-3 Section... OF DEFENSE GENERAL ADMINISTRATIVE MATTERS Contractor Identification 204.7202-3 TINs. Requirements for use of TINs are in FAR subpart 4.9. [64 FR 43100, Aug. 9, 1999] ...

  18. 77 FR 3725 - Proposed Significant New Use Rules on Certain Chemical Substances; Extension of Comment Period

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-25

    ... chemical substances rutile, tin zinc, calcium-doped (CAS No. 389623-01- 2) and rutile, tin zinc, sodium... substances rutile, tin zinc, calcium- doped (CAS No. 389623-01-2) and rutile, tin zinc, sodium-doped (CAS No...

  19. 48 CFR 204.7202-3 - TINs.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false TINs. 204.7202-3 Section... OF DEFENSE GENERAL ADMINISTRATIVE MATTERS Contractor Identification 204.7202-3 TINs. Requirements for use of TINs are in FAR subpart 4.9. [64 FR 43100, Aug. 9, 1999] ...

  20. Metallic tin quantum sheets confined in graphene toward high-efficiency carbon dioxide electroreduction

    NASA Astrophysics Data System (ADS)

    Lei, Fengcai; Liu, Wei; Sun, Yongfu; Xu, Jiaqi; Liu, Katong; Liang, Liang; Yao, Tao; Pan, Bicai; Wei, Shiqiang; Xie, Yi

    2016-09-01

    Ultrathin metal layers can be highly active carbon dioxide electroreduction catalysts, but may also be prone to oxidation. Here we construct a model of graphene confined ultrathin layers of highly reactive metals, taking the synthetic highly reactive tin quantum sheets confined in graphene as an example. The higher electrochemical active area ensures 9 times larger carbon dioxide adsorption capacity relative to bulk tin, while the highly-conductive graphene favours rate-determining electron transfer from carbon dioxide to its radical anion. The lowered tin-tin coordination numbers, revealed by X-ray absorption fine structure spectroscopy, enable tin quantum sheets confined in graphene to efficiently stabilize the carbon dioxide radical anion, verified by 0.13 volts lowered potential of hydroxyl ion adsorption compared with bulk tin. Hence, the tin quantum sheets confined in graphene show enhanced electrocatalytic activity and stability. This work may provide a promising lead for designing efficient and robust catalysts for electrolytic fuel synthesis.

  1. Platelet composite coatings for tin whisker mitigation

    DOE PAGES

    Rohwer, Lauren E. S.; Martin, James E.

    2015-09-14

    In this study, reliable methods for tin whisker mitigation are needed for applications that utilize tin-plated commercial components. Tin can grow whiskers that can lead to electrical shorting, possibly causing critical systems to fail catastrophically. The mechanisms of tin whisker growth are unclear and this makes prediction of the lifetimes of critical components uncertain. The development of robust methods for tin whisker mitigation is currently the best approach to eliminating the risk of shorting. Current mitigation methods are based on unfilled polymer coatings that are not impenetrable to tin whiskers. In this paper we report tin whisker mitigation results formore » several filled polymer coatings. The whisker-penetration resistance of the coatings was evaluated at elevated temperature and high humidity and under temperature cycling conditions. The composite coatings comprised Ni and MgF 2-coated Al/Ni/Al platelets in epoxy resin or silicone rubber. In addition to improved whisker mitigation, these platelet composites have enhanced thermal conductivity and dielectric constant compared with unfilled polymers.« less

  2. Platelet Composite Coatings for Tin Whisker Mitigation

    NASA Astrophysics Data System (ADS)

    Rohwer, Lauren E. S.; Martin, James E.

    2015-11-01

    Reliable methods for tin whisker mitigation are needed for applications that utilize tin-plated commercial components. Tin can grow whiskers that can lead to electrical shorting, possibly causing critical systems to fail catastrophically. The mechanisms of tin whisker growth are unclear and this makes prediction of the lifetimes of critical components uncertain. The development of robust methods for tin whisker mitigation is currently the best approach to eliminating the risk of shorting. Current mitigation methods are based on unfilled polymer coatings that are not impenetrable to tin whiskers. In this paper we report tin whisker mitigation results for several filled polymer coatings. The whisker-penetration resistance of the coatings was evaluated at elevated temperature and high humidity and under temperature cycling conditions. The composite coatings comprised Ni and MgF2-coated Al/Ni/Al platelets in epoxy resin or silicone rubber. In addition to improved whisker mitigation, these platelet composites have enhanced thermal conductivity and dielectric constant compared with unfilled polymers.

  3. Polynucleotides encoding TRF1 binding proteins

    DOEpatents

    Campisi, Judith; Kim, Sahn-Ho

    2002-01-01

    The present invention provides a novel telomere associated protein (Trf1-interacting nuclear protein 2 "Tin2") that hinders the binding of Trf1 to its specific telomere repeat sequence and mediates the formation of a Tin2-Trf1-telomeric DNA complex that limits telomerase access to the telomere. Also included are the corresponding nucleic acids that encode the Tin2 of the present invention, as well as mutants of Tin2. Methods of making, purifying and using Tin2 of the present invention are described. In addition, drug screening assays to identify drugs that mimic and/or complement the effect of Tin2 are presented.

  4. Optical Properties and Plasmonic Performance of Titanium Nitride

    PubMed Central

    Patsalas, Panos; Kalfagiannis, Nikolaos; Kassavetis, Spyros

    2015-01-01

    Titanium nitride (TiN) is one of the most well-established engineering materials nowadays. TiN can overcome most of the drawbacks of palsmonic metals due to its high electron conductivity and mobility, high melting point and due to the compatibility of its growth with Complementary Metal Oxide Semiconductor (CMOS) technology. In this work, we review the dielectric function spectra of TiN and we evaluate the plasmonic performance of TiN by calculating (i) the Surface Plasmon Polariton (SPP) dispersion relations and (ii) the Localized Surface Plasmon Resonance (LSPR) band of TiN nanoparticles, and we demonstrate a significant plasmonic performance of TiN.

  5. Estimating the Probability of Electrical Short Circuits from Tin Whiskers. Part 2

    NASA Technical Reports Server (NTRS)

    Courey, Karim J.; Asfour, Shihab S.; Onar, Arzu; Bayliss, Jon A.; Ludwig, Larry L.; Wright, Maria C.

    2009-01-01

    To comply with lead-free legislation, many manufacturers have converted from tin-lead to pure tin finishes of electronic components. However, pure tin finishes have a greater propensity to grow tin whiskers than tin-lead finishes. Since tin whiskers present an electrical short circuit hazard in electronic components, simulations have been developed to quantify the risk of said short circuits occurring. Existing risk simulations make the assumption that when a free tin whisker has bridged two adjacent exposed electrical conductors, the result is an electrical short circuit. This conservative assumption is made because shorting is a random event that had an unknown probability associated with it. Note however that due to contact resistance electrical shorts may not occur at lower voltage levels. In our first article we developed an empirical probability model for tin whisker shorting. In this paper, we develop a more comprehensive empirical model using a refined experiment with a larger sample size, in which we studied the effect of varying voltage on the breakdown of the contact resistance which leads to a short circuit. From the resulting data we estimated the probability distribution of an electrical short, as a function of voltage.

  6. Demonstration of high-performance p-type tin oxide thin-film transistors using argon-plasma surface treatments

    NASA Astrophysics Data System (ADS)

    Bae, Sang-Dae; Kwon, Soo-Hun; Jeong, Hwan-Seok; Kwon, Hyuck-In

    2017-07-01

    In this work, we investigated the effects of low-temperature argon (Ar)-plasma surface treatments on the physical and chemical structures of p-type tin oxide thin-films and the electrical performance of p-type tin oxide thin-film transistors (TFTs). From the x-ray photoelectron spectroscopy measurement, we found that SnO was the dominant phase in the deposited tin oxide thin-film, and the Ar-plasma treatment partially transformed the tin oxide phase from SnO to SnO2 by oxidation. The resistivity of the tin oxide thin-film increased with the plasma-treatment time because of the reduced hole concentration. In addition, the root-mean-square roughness of the tin oxide thin-film decreased as the plasma-treatment time increased. The p-type oxide TFT with an Ar-plasma-treated tin oxide thin-film exhibited excellent electrical performance with a high current on-off ratio (5.2 × 106) and a low off-current (1.2 × 10-12 A), which demonstrates that the low-temperature Ar-plasma treatment is a simple and effective method for improving the electrical performance of p-type tin oxide TFTs.

  7. 40 CFR 421.295 - Pretreatment standards for existing sources.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY Secondary Tin... existing sources. The mass of wastewater pollutants in secondary tin process wastewater introduced into a POTW must not exceed the following values: (a) Tin smelter SO2 scrubber. PSES for the Secondary Tin...

  8. 40 CFR 421.295 - Pretreatment standards for existing sources.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY Secondary Tin... existing sources. The mass of wastewater pollutants in secondary tin process wastewater introduced into a POTW must not exceed the following values: (a) Tin smelter SO2 scrubber. PSES for the Secondary Tin...

  9. 40 CFR 421.295 - Pretreatment standards for existing sources.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY Secondary Tin... existing sources. The mass of wastewater pollutants in secondary tin process wastewater introduced into a POTW must not exceed the following values: (a) Tin smelter SO2 scrubber. PSES for the Secondary Tin...

  10. 40 CFR 421.295 - Pretreatment standards for existing sources.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY Secondary Tin... existing sources. The mass of wastewater pollutants in secondary tin process wastewater introduced into a POTW must not exceed the following values: (a) Tin smelter SO2 scrubber. PSES for the Secondary Tin...

  11. 40 CFR 421.295 - Pretreatment standards for existing sources.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY Secondary Tin... existing sources. The mass of wastewater pollutants in secondary tin process wastewater introduced into a POTW must not exceed the following values: (a) Tin smelter SO2 scrubber. PSES for the Secondary Tin...

  12. An Investigation of the Electrical Short Circuit Characteristics of Tin Whiskers

    NASA Technical Reports Server (NTRS)

    Courey, Karim J.

    2008-01-01

    In this experiment, an empirical model to quantify the probability of occurrence of an electrical short circuit from tin whiskers as a function of voltage was developed. This model can be used to improve existing risk simulation models FIB and TEM images of a tin whisker confirm the rare polycrystalline structure on one of the three whiskers studied. FIB cross-section of the card guides verified that the tin finish was bright tin.

  13. Effect of Tin, Copper and Boron on the Hot Ductility of 20CrMnTi Steel between 650 °C and 1100 °C

    NASA Astrophysics Data System (ADS)

    Peng, Hong-bing; Chen, Wei-qing; Chen, Lie; Guo, Dong

    2015-02-01

    The hot ductility of 20CrMnTi steel with x% tin, y% copper and z ppm boron (x = 0, 0.02; y = 0, 0.2; z = 0, 60) was investigated. The results show that tin and copper in 20CrMnTi steel are detrimental to its hot ductility while adding boron can eliminate the adverse effect and enhance hot ductility greatly. Tin is found to segregate to the boundaries tested by EPMA in 20CrMnTi steel containing tin and copper and tin-segregation is suppressed by adding boron, moreover, copper was found not to segregate to boundaries, however, fine copper sulfide was found from carbon extraction replicas using TEM. The adverse effect of tin and copper on the hot ductility was due mainly to tin segregation and fine copper sulfide in the steel. The proeutectoid ferrite film precipitating along the austenite grain boundary causes the ductility trough of the three examined steels. Tin and copper in 20CrMnTi steel can retard the occurrence of dynamic recrystallization (DRX) while boron-addition can compensate for that change. The beneficial effect of boron on 20CrMnTi steel containing tin and copper might be ascribed to the fact that boron segregates to grain boundaries, accelerates onset of DRX, retards austenite/ferrite transformation and promotes intragranular nucleation of ferrite.

  14. Precipitation Behaviors of TiN Inclusion in GCr15 Bearing Steel Billet

    NASA Astrophysics Data System (ADS)

    Tian, Qianren; Wang, Guocheng; Zhao, Yang; Li, Jing; Wang, Qi

    2018-06-01

    There are many types of non-metallic TiN-based inclusions observed in GCr15 bearing steel, including single-particle TiN, multi-particle polymerized TiN, and complex inclusions like TiN-MnS, TiN-MgO-MgAl2O4 (TiN-MgO-MA), and TiN-MgAl2O4-MnS (TiN-MA-MnS). Thermodynamic calculations suggest that single-particle TiN precipitates dominate the mushy zone of GCr15 bearing steel. Kinetic calculations regarding TiN growth suggest that the final size of the single-particle TiN ranges between 1 and 6 μm in the initial concentration range of [pct Ti] = 0.0060 to 0.0079 and [pct N] = 0.0049 to 0.0070, at 1620 to 1640 K and a local cooling rate of 0.5 to 10 K/s. The multi-particle polymerized TiN are formed by single TiN particles in three stages: single-particle TiN inclusions approach each other drawn by the cavity bridge force (CBF), local active angles consolidate, and neck region sintering occurs. Based on the thermodynamic calculations of TiN, MnS, and MgO precipitation, the formation behaviors of complex inclusions of TiN-MnS, TiN-MgO-MA, and TiN-MA-MnS were investigated.

  15. 77 FR 32998 - Tin- and Chromium-Coated Steel Sheet From Japan

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-04

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 731-TA-860 (Second Review)] Tin- and Chromium... order on tin- and chromium-coated steel sheet from Japan would be likely to lead to continuation or... USITC Publication 4325 (May 2012), entitled Tin- and Chromium-Coated Steel Sheet from Japan...

  16. 40 CFR 471.10 - Applicability; description of the lead-tin-bismuth forming subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...-tin-bismuth forming subcategory. 471.10 Section 471.10 Protection of Environment ENVIRONMENTAL... METAL POWDERS POINT SOURCE CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.10 Applicability; description of the lead-tin-bismuth forming subcategory. This subpart applies to discharges of pollutants to...

  17. 26 CFR 31.3406(j)-1 - Taxpayer Identification Number (TIN) matching program.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 26 Internal Revenue 15 2013-04-01 2013-04-01 false Taxpayer Identification Number (TIN) matching... Number (TIN) matching program. (a) The matching program. Under section 3406(i), the Commissioner has the authority to establish Taxpayer Identification Number (TIN) matching programs. The Commissioner may...

  18. 26 CFR 31.3406(j)-1 - Taxpayer Identification Number (TIN) matching program.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 26 Internal Revenue 15 2011-04-01 2011-04-01 false Taxpayer Identification Number (TIN) matching... Number (TIN) matching program. (a) The matching program. Under section 3406(i), the Commissioner has the authority to establish Taxpayer Identification Number (TIN) matching programs. The Commissioner may...

  19. 26 CFR 31.3406(j)-1 - Taxpayer Identification Number (TIN) matching program.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 26 Internal Revenue 15 2012-04-01 2012-04-01 false Taxpayer Identification Number (TIN) matching... Number (TIN) matching program. (a) The matching program. Under section 3406(i), the Commissioner has the authority to establish Taxpayer Identification Number (TIN) matching programs. The Commissioner may...

  20. 40 CFR 471.10 - Applicability; description of the lead-tin-bismuth forming subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...-tin-bismuth forming subcategory. 471.10 Section 471.10 Protection of Environment ENVIRONMENTAL... METAL POWDERS POINT SOURCE CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.10 Applicability; description of the lead-tin-bismuth forming subcategory. This subpart applies to discharges of pollutants to...

  1. 40 CFR 471.10 - Applicability; description of the lead-tin-bismuth forming subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-tin-bismuth forming subcategory. 471.10 Section 471.10 Protection of Environment ENVIRONMENTAL... POINT SOURCE CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.10 Applicability; description of the lead-tin-bismuth forming subcategory. This subpart applies to discharges of pollutants to waters of the...

  2. 40 CFR 471.10 - Applicability; description of the lead-tin-bismuth forming subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...-tin-bismuth forming subcategory. 471.10 Section 471.10 Protection of Environment ENVIRONMENTAL... METAL POWDERS POINT SOURCE CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.10 Applicability; description of the lead-tin-bismuth forming subcategory. This subpart applies to discharges of pollutants to...

  3. 40 CFR 471.10 - Applicability; description of the lead-tin-bismuth forming subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-tin-bismuth forming subcategory. 471.10 Section 471.10 Protection of Environment ENVIRONMENTAL... POINT SOURCE CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.10 Applicability; description of the lead-tin-bismuth forming subcategory. This subpart applies to discharges of pollutants to waters of the...

  4. 26 CFR 31.3406(j)-1 - Taxpayer Identification Number (TIN) matching program.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 26 Internal Revenue 15 2014-04-01 2014-04-01 false Taxpayer Identification Number (TIN) matching... Number (TIN) matching program. (a) The matching program. Under section 3406(i), the Commissioner has the authority to establish Taxpayer Identification Number (TIN) matching programs. The Commissioner may...

  5. 26 CFR 31.3406(j)-1 - Taxpayer Identification Number (TIN) matching program.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 15 2010-04-01 2010-04-01 false Taxpayer Identification Number (TIN) matching... Number (TIN) matching program. (a) The matching program. Under section 3406(i), the Commissioner has the authority to establish Taxpayer Identification Number (TIN) matching programs. The Commissioner may...

  6. An Empirical Model for Estimating the Probability of Electrical Short Circuits from Tin Whiskers. Part 2

    NASA Technical Reports Server (NTRS)

    Courey, Karim; Wright, Clara; Asfour, Shihab; Onar, Arzu; Bayliss, Jon; Ludwig, Larry

    2009-01-01

    In this experiment, an empirical model to quantify the probability of occurrence of an electrical short circuit from tin whiskers as a function of voltage was developed. This empirical model can be used to improve existing risk simulation models. FIB and TEM images of a tin whisker confirm the rare polycrystalline structure on one of the three whiskers studied. FIB cross-section of the card guides verified that the tin finish was bright tin.

  7. Microwave plasma CVD of NANO structured tin/carbon composites

    DOEpatents

    Marcinek, Marek [Warszawa, PL; Kostecki, Robert [Lafayette, CA

    2012-07-17

    A method for forming a graphitic tin-carbon composite at low temperatures is described. The method involves using microwave radiation to produce a neutral gas plasma in a reactor cell. At least one organo tin precursor material in the reactor cell forms a tin-carbon film on a supporting substrate disposed in the cell under influence of the plasma. The three dimensional carbon matrix material with embedded tin nanoparticles can be used as an electrode in lithium-ion batteries.

  8. Preparation of textural lamellar tin deposits via electrodeposition

    NASA Astrophysics Data System (ADS)

    Wen, Xiaoyu; Pan, Xiaona; Wu, Libin; Li, Ruinan; Wang, Dan; Zhang, Jinqiu; Yang, Peixia

    2017-06-01

    Lamellar tin deposits were prepared by galvanostatical electroplating from the aqueous acidic-sulfate bath, with gelatin and benzalacetone dissolved in ethanol (ABA+EtOH) as additive, and their morphologies were investigated by scanning electron microscopy. Cathodic polarization curves revealed that the absorbability of ABA+EtOH on the cathode surface was higher than that of gelatin. X-ray diffraction analysis indicated preferred orientations of tin growth led to the formation of lamellar structure and distortion of tin lattice. The growth mechanism of lamellar tin was also discussed.

  9. NASA GSFC Tin Whisker Homepage http://nepp.nasa.gov/whisker

    NASA Technical Reports Server (NTRS)

    Shaw, Harry

    2000-01-01

    The NASA GSFC Tin Whisker Homepage provides general information and GSFC Code 562 experimentation results regarding the well known phenomenon of tin whisker formation from pure tin plated substrates. The objective of this www site is to provide a central repository for information pertaining to this phenomenon and to provide status of the GSFC experiments to understand the behavior of tin whiskers in space environments. The Tin Whisker www site is produced by Code 562. This www site does not provide information pertaining to patented or proprietary information. All of the information contained in this www site is at the level of that produced by industry and university researchers and is published at international conferences.

  10. Effect of thiourea on electrochemical nucleation and electrochemical impedance spectroscopy of electrodeposited tin on a copper substrate in a sulfate bath.

    PubMed

    Lee, Mi-Ri; Na, Seong-Hun; Park, Hwa-Sun; Suh, Su-Jeong

    2014-12-01

    The effect of thiourea on the electrochemical nucleation of tin on a copper substrate from a sulfate bath was studied using voltammetry, chronoamperometry, electrochemical impedance spectroscopy, and scanning electron microscopy. Without thiourea, electrodeposition of tin showed very poor surface coverage. However, re-nucleation and growth of tin occurred after the addition of thiourea. In particular, very rapid re-nucleation and growth behavior of tin were observed when up to 6 g/L of thiourea was added. Furthermore, impedance analysis allowed the estimation of the change in the growth behavior of tin when up to 6 g/L of thiourea was added.

  11. Structural studies of supported tin catalysts

    NASA Astrophysics Data System (ADS)

    Nava, Noel; Viveros, Tomás

    1999-11-01

    Tin oxide was supported on aluminium oxide, titanium oxide, magnesium oxide and silicon oxide, and the resulting interactions between the components in the prepared samples and after reduction were characterized by Mössbauer spectroscopy. It was observed that in the oxide state, tin is present as SnO2 on alumina, magnesia and silica, but on titania tin occupies Ti sites in the structure. After hydrogen treatment at high temperatures, tin is reduced from Sn(4) to Sn(2) on alumina and titania; it is reduced from Sn(4) to Sn(0) on silica, and is practically not reduced on magnesia. These results reveal the degree of interaction between tin and the different supports studied.

  12. Organic derivatives of tin (II/IV): Investigation of their structure

    NASA Astrophysics Data System (ADS)

    Szirtes, L.; Megyeri, J.; Kuzmann, E.; Beck, A.

    2011-07-01

    The structures of tin(II)-oxalate, tin(IV)Na-EDTA and tin(IV)Na 8-inositol hexaphosphate were investigated using XRD analysis. Samples were identified using the Mössbauer study, thermal analysis and FTIR spectrometry. The Mössbauer study determined two different oxidation states of tin atoms, and consequently two different tin surroundings in the end products. The tin oxalate was found to be orthorhombic with space group Pnma, a=9.2066(3) Å, b=9.7590(1) Å, c=13.1848(5) Å, V=1184.62 Å 3 and Z=8. SnNa-EDTA was found to be monoclinic with space group P2 1/c 1, a=10.7544(3) Å, b=10.1455(3) Å, c=16.5130(6) Å, β=98.59(2)°, V=1781.50(4) Å 3 and Z=4. Sn(C 6H 6Na 8O 24P 6) was found to be amorphous.

  13. A charge optimized many-body potential for titanium nitride (TiN).

    PubMed

    Cheng, Y-T; Liang, T; Martinez, J A; Phillpot, S R; Sinnott, S B

    2014-07-02

    This work presents a new empirical, variable charge potential for TiN systems in the charge-optimized many-body potential framework. The potential parameters were determined by fitting them to experimental data for the enthalpy of formation, lattice parameters, and elastic constants of rocksalt structured TiN. The potential does a good job of describing the fundamental physical properties (defect formation and surface energies) of TiN relative to the predictions of first-principles calculations. This potential is used in classical molecular dynamics simulations to examine the interface of fcc-Ti(0 0 1)/TiN(0 0 1) and to characterize the adsorption of oxygen atoms and molecules on the TiN(0 0 1) surface. The results indicate that the potential is well suited to model TiN thin films and to explore the chemistry associated with their oxidation.

  14. Effect of doping of tin on optoelectronic properties of indium oxide: DFT study

    NASA Astrophysics Data System (ADS)

    Tripathi, Madhvendra Nath

    2015-06-01

    Indium tin oxide is widely used transparent conductor. Experimentally observed that 6% tin doping in indium oxide is suitable for optoelectronic applications and more doping beyond this limit degrades the optoelectronic property. The stoichiometry (In32-xSnxO48+x/2; x=0-6) is taken to understand the change in lattice parameter, electronic structure, and optical property of ITO. It is observed that lattice parameter increases and becomes constant after 6% tin doping that is in good agreement of the experimental observation. The electronic structure calculation shows that the high tin doping in indium oxide adversely affects the dispersive nature of the bottom of conduction band of pure indium oxide and decreases the carrier mobility. Optical calculations show that transmittance goes down upto 60% for the tin concentration more than 6%. The present paper shows that how more than 6% tin doping in indium oxide adversely affects the optoelectronic property of ITO.

  15. 77 FR 13156 - Carolina Power & Light Company; Shearon Harris Nuclear Power Plant, Unit 1; Exemption

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-05

    ... percent) and niobium (~1 percent). The elimination of tin has resulted in superior corrosion resistance and reduced irradiation-induced growth relative to both standard zircaloy (1.7 percent tin) and low-tin zircaloy (1.2 percent tin). The addition of niobium increases ductility, which is desirable to...

  16. 26 CFR 1.6050H-0 - Table of contents.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ..., 1989. (i) Failure to file return or to furnish statement. (ii) Failure to furnish TIN. (iii) Failure to...) Failure to furnish TIN. (iii) Failure to include correct information. (f) Requirement to request and to obtain TIN. (1) In general. (2) Manner of requesting TIN. (g) Effective date. (1) In general. (2) Points...

  17. 40 CFR 721.10140 - Phosphoric acid, tin (2+) salt (2:3).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Phosphoric acid, tin (2+) salt (2:3... Specific Chemical Substances § 721.10140 Phosphoric acid, tin (2+) salt (2:3). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as phosphoric acid, tin (2...

  18. 78 FR 52802 - Tin T. Win, M.D., Dismissal of Proceeding

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-26

    ... DEPARTMENT OF JUSTICE Drug Enforcement Administration Tin T. Win, M.D., Dismissal of Proceeding On... Cause and Immediate Suspension of Registration to Tin T. Win, M.D. (hereinafter, Registrant), of Lake... order that the Order to Show Cause and Immediate Suspension of Registration issued to Tin T. Win, M.D...

  19. 40 CFR 721.10140 - Phosphoric acid, tin (2+) salt (2:3).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Phosphoric acid, tin (2+) salt (2:3... Specific Chemical Substances § 721.10140 Phosphoric acid, tin (2+) salt (2:3). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as phosphoric acid, tin (2...

  20. 40 CFR 721.10140 - Phosphoric acid, tin (2+) salt (2:3).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Phosphoric acid, tin (2+) salt (2:3... Specific Chemical Substances § 721.10140 Phosphoric acid, tin (2+) salt (2:3). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as phosphoric acid, tin (2...

  1. 77 FR 66449 - Applications for New Awards; National Institute on Disability and Rehabilitation Research...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-05

    ...) number and a Taxpayer Identification Number (TIN); b. Register both your DUNS number and TIN with the...), the Government's primary registrant database; c. Provide your DUNS number and TIN on your application... you are a corporate entity, agency, institution, or organization, you can obtain a TIN from the...

  2. 77 FR 27031 - Applications for New Awards; Centers for Independent Living

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-08

    ... Number (TIN); b. Register both your DUNS number and TIN with the Central Contractor Registry (CCR), the Government's primary registrant database; c. Provide your DUNS number and TIN on your application; and d..., agency, institution, or organization, you can obtain a TIN from the Internal Revenue Service. If you are...

  3. 38 CFR 61.12 - Capital grant application packages-threshold requirements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... contains the Employer Identification Number or Taxpayer Identification Number (EIN/TIN) that corresponds to... must provide such an IRS determination letter, which includes their EIN/TIN. Applicants that apply under a group EIN/TIN must be identified by the parent EIN/TIN as a member or sub-unit of the parent EIN...

  4. 26 CFR 1.6050H-0 - Table of contents.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ..., 1989. (i) Failure to file return or to furnish statement. (ii) Failure to furnish TIN. (iii) Failure to...) Failure to furnish TIN. (iii) Failure to include correct information. (f) Requirement to request and to obtain TIN. (1) In general. (2) Manner of requesting TIN. (g) Effective date. (1) In general. (2) Points...

  5. 38 CFR 61.12 - Capital grant application packages-threshold requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... contains the Employer Identification Number or Taxpayer Identification Number (EIN/TIN) that corresponds to... must provide such an IRS determination letter, which includes their EIN/TIN. Applicants that apply under a group EIN/TIN must be identified by the parent EIN/TIN as a member or sub-unit of the parent EIN...

  6. 26 CFR 1.6050H-0 - Table of contents.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ..., 1989. (i) Failure to file return or to furnish statement. (ii) Failure to furnish TIN. (iii) Failure to...) Failure to furnish TIN. (iii) Failure to include correct information. (f) Requirement to request and to obtain TIN. (1) In general. (2) Manner of requesting TIN. (g) Effective date. (1) In general. (2) Points...

  7. 7 CFR 3.44 - Centralized administrative offset.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... TINs of debtors who owe debts referred to Treasury under this section shall be compared to the names and TINs on payments to be made by Federal disbursing officials. Federal disbursing officials include... and TIN of a debtor match the name and TIN of a payee and all other requirements for offset have been...

  8. 26 CFR 1.6050H-0 - Table of contents.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ..., 1989. (i) Failure to file return or to furnish statement. (ii) Failure to furnish TIN. (iii) Failure to...) Failure to furnish TIN. (iii) Failure to include correct information. (f) Requirement to request and to obtain TIN. (1) In general. (2) Manner of requesting TIN. (g) Effective date. (1) In general. (2) Points...

  9. 40 CFR 721.10230 - Rutile, tin zinc, calcium doped.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Rutile, tin zinc, calcium doped. 721... Substances § 721.10230 Rutile, tin zinc, calcium doped. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as rutile, tin zinc, calcium-doped (PMN P-06...

  10. 40 CFR 721.10231 - Rutile, tin zinc, sodium-doped.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Rutile, tin zinc, sodium-doped. 721... Substances § 721.10231 Rutile, tin zinc, sodium-doped. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as rutile, tin zinc, sodium-doped (PMN P-06-37...

  11. 77 FR 34938 - Certain Tin Mill Products From Japan: Continuation of Antidumping Duty Order

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-12

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-588-854] Certain Tin Mill Products... duty order on certain tin mill products from Japan would likely lead to continuation or recurrence of...: Background On August 28, 2000, the Department published the antidumping duty order on certain tin mill...

  12. 42 CFR 425.504 - Incorporating reporting requirements related to the Physician Quality Reporting System.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... under their ACO participant TIN as a group practice under the Physician Quality Reporting System Group... participant TIN, on behalf of its ACO supplier/provider participants who are eligible professionals, will... Physician Fee Schedule for that TIN. (4) ACO participant TINs and individual ACO providers/suppliers who are...

  13. 42 CFR 425.504 - Incorporating reporting requirements related to the Physician Quality Reporting System.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... under their ACO participant TIN as a group practice under the Physician Quality Reporting System Group... participant TIN, on behalf of its ACO supplier/provider participants who are eligible professionals, will... Physician Fee Schedule for that TIN. (4) ACO participant TINs and individual ACO providers/suppliers who are...

  14. 7 CFR 3.44 - Centralized administrative offset.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... TINs of debtors who owe debts referred to Treasury under this section shall be compared to the names and TINs on payments to be made by Federal disbursing officials. Federal disbursing officials include... and TIN of a debtor match the name and TIN of a payee and all other requirements for offset have been...

  15. 76 FR 14902 - Certain Tin Mill Products From Japan: Rescission of Antidumping Duty Administrative Review

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-18

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-588-854] Certain Tin Mill Products... duty order covering certain tin mill products from Japan. The period of review is August 1, 2009... parties to request an administrative review of the antidumping duty order on certain tin mill products...

  16. 7 CFR 3.44 - Centralized administrative offset.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... TINs of debtors who owe debts referred to Treasury under this section shall be compared to the names and TINs on payments to be made by Federal disbursing officials. Federal disbursing officials include... and TIN of a debtor match the name and TIN of a payee and all other requirements for offset have been...

  17. 40 CFR 721.10231 - Rutile, tin zinc, sodium-doped.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Rutile, tin zinc, sodium-doped. 721... Substances § 721.10231 Rutile, tin zinc, sodium-doped. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as rutile, tin zinc, sodium-doped (PMN P-06-37...

  18. 77 FR 5767 - Certain Tin Mill Products From Japan: Rescission of Antidumping Duty Administrative Review

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-06

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-588-854] Certain Tin Mill Products... duty order covering certain tin mill products from Japan. The period of review is August 1, 2010... parties to request an administrative review of the antidumping duty order on certain tin mill products...

  19. 40 CFR 721.10140 - Phosphoric acid, tin (2+) salt (2:3).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Phosphoric acid, tin (2+) salt (2:3... Specific Chemical Substances § 721.10140 Phosphoric acid, tin (2+) salt (2:3). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as phosphoric acid, tin (2...

  20. 7 CFR 3.44 - Centralized administrative offset.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... TINs of debtors who owe debts referred to Treasury under this section shall be compared to the names and TINs on payments to be made by Federal disbursing officials. Federal disbursing officials include... and TIN of a debtor match the name and TIN of a payee and all other requirements for offset have been...

  1. 40 CFR 721.10140 - Phosphoric acid, tin (2+) salt (2:3).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Phosphoric acid, tin (2+) salt (2:3... Specific Chemical Substances § 721.10140 Phosphoric acid, tin (2+) salt (2:3). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as phosphoric acid, tin (2...

  2. 26 CFR 1.6050H-0 - Table of contents.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ..., 1989. (i) Failure to file return or to furnish statement. (ii) Failure to furnish TIN. (iii) Failure to...) Failure to furnish TIN. (iii) Failure to include correct information. (f) Requirement to request and to obtain TIN. (1) In general. (2) Manner of requesting TIN. (g) Effective date. (1) In general. (2) Points...

  3. 40 CFR 721.10230 - Rutile, tin zinc, calcium doped.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Rutile, tin zinc, calcium doped. 721... Substances § 721.10230 Rutile, tin zinc, calcium doped. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as rutile, tin zinc, calcium-doped (PMN P-06...

  4. 76 FR 68512 - Carolina Power & Light Company; H. B. Robinson Steam Electric Plant, Unit 2; Exemption

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-04

    ... (~1 percent). The elimination of tin has resulted in superior corrosion resistance and reduced irradiation-induced growth relative to both standard zircaloy (1.7 percent tin) and low-tin zircaloy (1.2 percent tin). The addition of niobium increases ductility, which is desirable to avoid brittle failures...

  5. 7 CFR 3.44 - Centralized administrative offset.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... TINs of debtors who owe debts referred to Treasury under this section shall be compared to the names and TINs on payments to be made by Federal disbursing officials. Federal disbursing officials include... and TIN of a debtor match the name and TIN of a payee and all other requirements for offset have been...

  6. Influence of Microstructure on the Electrical Properties of Heteroepitaxial TiN Films

    NASA Astrophysics Data System (ADS)

    Xiang, Wenfeng; Liu, Yuan; Zhang, Jiaqi

    2018-05-01

    Heteroepitaxial TiN films were deposited on Si substrates by pulse laser deposition at different substrate temperature. The microstructure and surface morphology of the films were investigated by X-ray diffraction (θ-2θ scan, ω-scan, and ϕ-scan) and atomic force microscopy. The electrical properties of the prepared TiN films were studied using a physical property measurement system. The experimental results showed that the crystallinity and surface morphology of the TiN films were improved gradually with increasing substrate temperature below 700 °C. Specially, single crystal TiN films were prepared when substrate temperature is above 700 °C; However, the quality of TiN films gradually worsened when the substrate temperature was increased further. The electrical properties of the films were directly correlated to their crystalline quality. At the optimal substrate temperature of 700 °C, the TiN films exhibited the lowest resistivity and highest mobility of 25.7 μΩ cm and 36.1 cm2/V s, respectively. In addition, the mechanism concerning the influence of substrate temperature on the microstructure of TiN films is discussed in detail.

  7. From toothpaste to topological insulators and materials for valleytronics: The journeys of fluorinated tin

    NASA Astrophysics Data System (ADS)

    Barraza-Lopez, Salvador; Rivero, Pablo; Yan, Jia-An; Garcia-Suarez, Victor Manuel; Ferrer, Jaime

    2015-03-01

    Tin fluoride has a vast literature. This material is stable in bulk form at room temperature and has commercial applications that include fluorinated toothpaste. Bulk tin fluoride has a pair of fluorine atoms bridging two tin atoms. In the recent past the electronic properties of 2D tin with honeycomb structure have been discussed thus generating a wealth of literature that emphasizes its non-topologically-trivial electronic properties due to the combination of a Dirac-like dispersion and a strong spin-orbit coupling given its large atomic mass. Nevertheless the stability of such freestanding structures has been contested recently. As it turns out, the most stable form of fluorinated tin does not possess a graphane-like structure either. In the most stable phase to be discussed here, fluorine atoms tilt away from (graphane-like) positions over/below tin atoms; in an atomistic arrangement similar to the one seen on their parent bulk structure. Electronic properties depend on atomistic coordination, and the most stable form of fluorinated tin does not possess non-trivial topological properties. Nevertheless it represents a new paradigm for valleytronics in 2D.

  8. Organo-tins in sediments and mussels from the Sado estuarine system (Portugal).

    PubMed

    Quevauviller, P; Lavigne, R; Pinel, R; Astruc, M

    1989-01-01

    Analyses of methyl- and butyl-tin levels in freshwater, estuarine and marine sediments from the Sado estuarine system, and in mussels (Mytilus galloprovincialis) from its adjacent coast, have been performed in order to detect the contaminated areas. The main inputs of tributyl-tin (TBT), along with degradation products di- and monobutyl-tin (DBT and MBT), were detected in the estuarine zone, due to high discharge from shipyards located in this area. These levels are sometimes very high, ranging from 235 to 12,200 ng g(-1) total butyl-tins in sediments. Such inputs lead to higher bioconcentration values in mussels in the estuarine zone, as well as in a harbour located along the adjacent coast. The bioconcentration of organo-tins in mussel tissues could be enhanced in estuarine turbid waters, due to an ingestion of butyl-tins adsorbed onto fine particles, in comparison with non-turbid coastal waters. Debutylation processes occur in both sediments and mussel tissues; in organisms, these processes may lead to the formation of inorganic tin, which may be methylated differently according to the period of the year.

  9. Carbon/tin oxide composite electrodes for improved lithium-ion batteries

    DOE PAGES

    Li, Yunchao; Levine, Alan M.; Zhang, Jinshui; ...

    2018-05-17

    Tin and tin oxide-based electrodes are promising high-capacity anodes for lithium-ion batteries. However, poor capacity retention is the major issue with these materials due to the large volumetric expansion that occurs when lithium is alloyed with tin during lithiation and delithiation process. Here, a method to prepare a low-cost, scalable carbon and tin(II) oxide composite anode is reported. The composite material was prepared by ball milling of carbon recovered from used tire powders with 25 wt% tin(II) oxide to form lithium-ion battery anode. With the impact of energy from the ball milling, tin oxide powders were uniformly distributed inside themore » pores of waste-tire-derived carbon. During lithiation and delithiation, the carbon matrix can effectively absorb the volume expansion caused by tin, thereby minimizing pulverization and capacity fade of the electrodes. In conclusion, the as-synthesized anode yielded a capacity of 690 mAh g –1 after 300 cycles at a current density of 40 mA g –1 with a stable battery performance.« less

  10. Carbon/tin oxide composite electrodes for improved lithium-ion batteries

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Li, Yunchao; Levine, Alan M.; Zhang, Jinshui

    Tin and tin oxide-based electrodes are promising high-capacity anodes for lithium-ion batteries. However, poor capacity retention is the major issue with these materials due to the large volumetric expansion that occurs when lithium is alloyed with tin during lithiation and delithiation process. Here, a method to prepare a low-cost, scalable carbon and tin(II) oxide composite anode is reported. The composite material was prepared by ball milling of carbon recovered from used tire powders with 25 wt% tin(II) oxide to form lithium-ion battery anode. With the impact of energy from the ball milling, tin oxide powders were uniformly distributed inside themore » pores of waste-tire-derived carbon. During lithiation and delithiation, the carbon matrix can effectively absorb the volume expansion caused by tin, thereby minimizing pulverization and capacity fade of the electrodes. In conclusion, the as-synthesized anode yielded a capacity of 690 mAh g –1 after 300 cycles at a current density of 40 mA g –1 with a stable battery performance.« less

  11. Pechini process-derived tin oxide and tin oxide-graphite composites for lithium-ion batteries

    NASA Astrophysics Data System (ADS)

    Zhang, R.; Lee, Jim Y.; Liu, Z. L.

    The Pechini process [Ceram. Bull. 68 (1989) 1002] is used to obtain fine tin oxide powders that reduce the specific volume change in Li + insertion and extraction reactions. The suitability of these tin oxides as active materials for negative electrodes in lithium-ion batteries is investigated. From elemental analysis, it is found that the templating polymer network is almost completely obliterated after heating at 500 °C. The best tin oxide does not exhibit extensive crystallization of tin atoms even after 30 cycles of alloying and de-alloying reactions with Li. The structure and the specific capacity of the oxides are dependent on the heat treatment and remnants of the polymeric CH network can impose an unfavorable outcome. A capacity of 600 mAh g -1, which is unchanged for 30 cycles, can be obtained from tin oxide heat treated at 1000 °C. Composites of graphite and SnO 2 are also prepared and exhibit synergistic interactions between graphite and tin oxide which are similar to those reported previously [Electrochem. Solid State Lett. 3 (2000) 167].

  12. Infrared Emissivity of Tin upon Release of a 25 GPa Shock into a LiF Window

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Turley, W. D., Holtkamp, D. B., Marshall, B. R., Stevens, G. D., Veeser, L. R.

    We measured the emissivity of a tin sample at its interface with a lithium-fluoride window upon release of a 25 GPa shock wave from the tin into the window. Measurements were made over four wavelength bands between 1.2 and 5.4 μm. Thermal emission backgrounds from the tin, glue, and lithium fluoride were successfully removed from the reflectance signals. Emissivity changes for the sample, which was initially nearly specular, were small except for the longest wavelength band, where uncertainties were high because of poor signal-to-noise ratio at that wavelength. A thin glue layer, which bonds the sample to the window, wasmore » found to heat from reverberations of the shock wave between the tin and the lithium fluoride. At approximately 3.4 μm the thermal emission from the glue was large compared to the tin, allowing a good estimate of the glue temperature from the thermal radiance. The glue appears to remain slightly colder than the tin, thereby minimizing heat conduction into or out of the tin immediately after the shock passage.« less

  13. Influence of silicon oxide on the performance of TiN bottom electrode in phase change memory

    NASA Astrophysics Data System (ADS)

    Gao, Dan; Liu, Bo; Xu, Zhen; Wang, Heng; Xia, Yangyang; Wang, Lei; Zhu, Nanfei; Li, Ying; Zhan, Yipeng; Song, Zhitang; Feng, Songlin

    2016-10-01

    The stability of TiN which is the preferred bottom electrode contact (BEC) of phase change memory (PCM) due to its low thermal conductivity and suitable electrical conductivity, is very essential to the reliability of PCM devices. In this work, in order to investigate the effect of high aspect ratio process (HARP) SiO2 on the performance of TiN, both TiN/SiO2, TiN/SiN thin films and TiN BEC device structures are analyzed. By combining transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDS), we found that the TiN would be oxidized after the deposition of HARP SiO2 and there exist a thin ( 4 nm) oxidation interfacial layer between TiN and SiO2. Electrical measurements were performed on the 1R PCM test-key die with 7 nm and 10 nm BEC-only cells. The statistical initial resistances of BEC have wide distribution and it is confirmed that the non-uniform oxidation of TiN BEC affects the astringency of the resistance of TiN BEC. The experimental results help to optimize the process of TiN BEC, and SiN is recommended as a better choice as the linear layer.

  14. Tubulointerstitial nephritis antigen: an extracellular matrix protein that selectively regulates tubulogenesis vs. glomerulogenesis during mammalian renal development.

    PubMed

    Kanwar, Y S; Kumar, A; Yang, Q; Tian, Y; Wada, J; Kashihara, N; Wallner, E I

    1999-09-28

    Tubulointerstitial nephritis antigen (TIN-ag) is an extracellular matrix protein and is expressed in the renal tubular basement membranes. Its role in metanephric development was investigated. TIN-ag cDNA, isolated from the newborn mouse library, had an ORF of 1,425 nucleotides, a putative signal sequence, and an ATP/GTP-binding site. The translated sequence had approximately 80% identity with rabbit TIN-ag. Among various tissues, TIN-ag mRNA was primarily expressed in the newborn kidney. In the embryonic metanephros, TIN-ag expression was confined to the distal convolution or pole of the S-shaped body, the segment of the nascent nephron that is the progenitor of renal tubules. Treatment with TIN-ag antisense oligodeoxynucleotide induced dysmorphogenesis of the embryonic metanephroi, malformation of the S-shaped body, and a decrease in the tubular population, whereas the glomeruli were unaffected. Treatment also led to a decrease of TIN-Ag mRNA, de novo synthesis of TIN-ag protein, and its antibody reactivity. The mRNA expression of glomerular epithelial protein 1 (a marker for renal podocytes), anti-heparan-sulfate-proteoglycan antibody reactivity, and wheat germ agglutinin lectin staining of the metanephros were unaffected. The anti-TIN-ag antibody treatment also caused deformation of the S-shaped body and a reduction in the tubular population, whereas the glomeruli were unchanged. The data suggest that the TIN-ag, unlike other basement membrane proteins, selectively regulates tubulogenesis, whereas glomerulogenesis is largely unaffected.

  15. Synergistic Effect of Nitrogen and Refractory Material on TiN Formation and Equiaxed Grain Structure of Ferritic Stainless Steel

    NASA Astrophysics Data System (ADS)

    Lee, Mun Hyung; Park, Joo Hyun

    2018-06-01

    The effect of nitrogen content on the formation of an equiaxed solidification structure of Fe-16Cr steel was investigated. Moreover, two different kinds of refractory materials, i.e., alumina and magnesia, were employed to control the type of oxide inclusion. The characteristics of TiN(-oxide) inclusions were quantitatively analyzed in both molten steel and solidified samples. When the melting was carried out in the alumina refractory, the grain size continuously decreased with increasing nitrogen content. However, a minimum grain size was observed at a specific nitrogen content (approx. 150 ppm) when the steel was melted in the magnesia refractory. Most of the single TiN particles had a cuboidal shape and fine irregularly shaped particles were located along the grain boundary due to the microsegregation of Ti at the grain boundary during solidification. The type of TiN-oxide hybrid inclusion was strongly affected by the refractory material where Al2O3-TiN and MgAl2O4-TiN hybrid-type inclusions were obtained in the alumina and magnesia refractory experiments, respectively. The formation of oxide inclusions was well predicted by thermochemical computations and it was commonly found that oxide particles were initially formed, followed by the nucleation and growth of TiN. When the nitrogen content increased, the number density of TiN linearly increased in the alumina refractory experiments. However, the number of TiN exhibits a maximum at about [N] = 150 ppm, at which a minimum grain size was obtained in the magnesia refractory experiments. Therefore, the larger the number density of TiN, the smaller the primary grain size after solidification. The number density of TiN in the steel melted in the magnesia refractory was greater than that in the steel melted in the alumina refractory at given Ti and N contents, which was due to the lower planar lattice disregistry of MgAl2O4-TiN interface rather than that of Al2O3-TiN interface. When Δ T TiN (= difference between the TiN precipitation temperature and the liquidus of the steel) was 20 K to 40 K, the number density of effective TiN was maximized and thus, the grain size was minimized after solidification. Finally, although most of the TiN particles were smaller than 1 μm in the molten steel samples irrespective of the nitrogen content, TiN particles larger than 10 μm were observed in the solidified samples when the nitrogen content was greater than 150 ppm. The growth of TiN particles during melting and solidification was well predicted by the combinatorial simulation of the `Ostwald ripening model' based on the Lifshitz-Slyozov-Wagner theory in conjunction with the `Diffusion controlled model' using Ohnaka's microsegregation equation.

  16. Synergistic Effect of Nitrogen and Refractory Material on TiN Formation and Equiaxed Grain Structure of Ferritic Stainless Steel

    NASA Astrophysics Data System (ADS)

    Lee, Mun Hyung; Park, Joo Hyun

    2018-03-01

    The effect of nitrogen content on the formation of an equiaxed solidification structure of Fe-16Cr steel was investigated. Moreover, two different kinds of refractory materials, i.e., alumina and magnesia, were employed to control the type of oxide inclusion. The characteristics of TiN(-oxide) inclusions were quantitatively analyzed in both molten steel and solidified samples. When the melting was carried out in the alumina refractory, the grain size continuously decreased with increasing nitrogen content. However, a minimum grain size was observed at a specific nitrogen content (approx. 150 ppm) when the steel was melted in the magnesia refractory. Most of the single TiN particles had a cuboidal shape and fine irregularly shaped particles were located along the grain boundary due to the microsegregation of Ti at the grain boundary during solidification. The type of TiN-oxide hybrid inclusion was strongly affected by the refractory material where Al2O3-TiN and MgAl2O4-TiN hybrid-type inclusions were obtained in the alumina and magnesia refractory experiments, respectively. The formation of oxide inclusions was well predicted by thermochemical computations and it was commonly found that oxide particles were initially formed, followed by the nucleation and growth of TiN. When the nitrogen content increased, the number density of TiN linearly increased in the alumina refractory experiments. However, the number of TiN exhibits a maximum at about [N] = 150 ppm, at which a minimum grain size was obtained in the magnesia refractory experiments. Therefore, the larger the number density of TiN, the smaller the primary grain size after solidification. The number density of TiN in the steel melted in the magnesia refractory was greater than that in the steel melted in the alumina refractory at given Ti and N contents, which was due to the lower planar lattice disregistry of MgAl2O4-TiN interface rather than that of Al2O3-TiN interface. When ΔT TiN (= difference between the TiN precipitation temperature and the liquidus of the steel) was 20 K to 40 K, the number density of effective TiN was maximized and thus, the grain size was minimized after solidification. Finally, although most of the TiN particles were smaller than 1 μm in the molten steel samples irrespective of the nitrogen content, TiN particles larger than 10 μm were observed in the solidified samples when the nitrogen content was greater than 150 ppm. The growth of TiN particles during melting and solidification was well predicted by the combinatorial simulation of the `Ostwald ripening model' based on the Lifshitz-Slyozov-Wagner theory in conjunction with the `Diffusion controlled model' using Ohnaka's microsegregation equation.

  17. 76 FR 17391 - Applications for New Awards; United States-Brazil Higher Education Consortia Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-29

    ... Number (TIN); b. Register both your DUNS number and TIN with the Central Contractor Registry (CCR), the Government's primary registrant database; c. Provide your DUNS number and TIN on your application; and d..., agency, institution, or organization, you can obtain a TIN from the Internal Revenue Service. If you are...

  18. 19 CFR 159.22 - Net weights and tares.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... tins imported from Spain: The following schedule drained weight shall be used as the Customs dutiable... in tins and such drained weight being the allowance made in liquidation for tare for water: Size can Drained weight 3 kilo 13.6 kilograms-case of 6 tins. 794 grams 16.7 kilograms-case of 24 tins. 425 grams 8...

  19. 78 FR 22855 - Applications for New Awards; Fulbright-Hays Group Projects Abroad Program-Short-Term Projects

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-17

    ... (DUNS) number and a Taxpayer Identification Number (TIN); b. Register both your DUNS number and TIN with... (SAM), the Government's primary registrant database; c. Provide your DUNS number and TIN on your... you are a corporate entity, agency, institution, or organization, you can obtain a TIN from the...

  20. 76 FR 66855 - United States Savings Bonds, Series EE, HH and I

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-28

    .... 351.43 to read as follows: Sec. 351.43 Are Taxpayer Identification Numbers (TINs) required for the... owner's TIN is not known, the TIN of the purchaser must be included in the registration of the bond. 0 6.... 359.28 Are Taxpayer Identification Numbers (TINs) required for the registration of definitive series I...

  1. 77 FR 37012 - Applications for New Awards: Disability and Rehabilitation Research Projects and Centers Program...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-20

    ... Number (TIN); b. Register both your DUNS number and TIN with the Central Contractor Registry (CCR), the Government's primary registrant database; c. Provide your DUNS number and TIN on your application; and d..., agency, institution, or organization, you can obtain a TIN from the Internal Revenue Service. If you are...

  2. 77 FR 51782 - Federal Acquisition Regulation; Information Collection; Taxpayer Identification Number Information

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-27

    ... agency is required to furnish its Tax Identification Number (TIN) to that agency. 31 U.S.C. 3325(d... and submitted to a disbursing official, the TIN of the contractor receiving payment under the voucher... other information, its TIN. The TIN may be used by the Government to collect and report on any...

  3. 19 CFR 159.22 - Net weights and tares.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... tins imported from Spain: The following schedule drained weight shall be used as the Customs dutiable... in tins and such drained weight being the allowance made in liquidation for tare for water: Size can Drained weight 3 kilo 13.6 kilograms-case of 6 tins. 794 grams 16.7 kilograms-case of 24 tins. 425 grams 8...

  4. 78 FR 18343 - Federal Acquisition Regulation; Submission for OMB Review; Taxpayer Identification Number...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-26

    ... agency is required to furnish its Tax Identification Number (TIN) to that agency. 31 U.S.C. 3325(d... and submitted to a disbursing official, the TIN of the contractor receiving payment under the voucher... other information, its TIN. The TIN may be used by the Government to collect and report on any...

  5. 77 FR 11189 - Yokohama Tire Corporation, Denial of Petition for Decision of Inconsequential Noncompliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-24

    ... full Tire Identification Number (TIN) on one sidewall but omit the partial serial number on the other....'' YTC explained its belief that the Tire Identification Number (TIN) and the partial TIN are used to... TIN is molded on the intended outboard sidewall of these tires and consumers could be directed to have...

  6. 21 CFR 184.1845 - Stannous chloride (anhydrous and dihydrated).

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    .... 7772-99-8) is the chloride salt of metallic tin. It is prepared by reacting molten tin with either chlorine or gaseous tin tetrachloride. Dihydrated stannous chloride (SnCl2·2H2O, CAS Reg. No. 10025-69-1) is the chloride salt of metallic tin that contains two molecules of water. It is prepared from...

  7. 19 CFR 159.22 - Net weights and tares.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... tins imported from Spain: The following schedule drained weight shall be used as the Customs dutiable... in tins and such drained weight being the allowance made in liquidation for tare for water: Size can Drained weight 3 kilo 13.6 kilograms-case of 6 tins. 794 grams 16.7 kilograms-case of 24 tins. 425 grams 8...

  8. 75 FR 51524 - Yokohama Tire Corporation, Receipt of Petition for Decision of Inconsequential Noncompliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-20

    ... noncompliance is that the subject tires do not have full or partial Tire Identification Numbers (TIN) on one of their sidewalls. YTC explained that the intended outboard sidewall did have the complete TIN, but the opposite sidewall has no TIN or partial TIN. YTC stated its belief that the noncompliance is...

  9. 76 FR 58536 - Tin- and Chromium-Coated Steel Sheet From Japan; Notice of Commission Determination To Conduct a...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-21

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 731-TA-860 (Second Review)] Tin- and Chromium... Concerning the Antidumping Duty Order on Tin- and Chromium-Coated Steel Sheet From Japan AGENCY: United.... 1675(c)(5)) to determine whether revocation of the antidumping duty order on tin- and chromium-coated...

  10. 19 CFR 159.22 - Net weights and tares.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... tins imported from Spain: The following schedule drained weight shall be used as the Customs dutiable... in tins and such drained weight being the allowance made in liquidation for tare for water: Size can Drained weight 3 kilo 13.6 kilograms-case of 6 tins. 794 grams 16.7 kilograms-case of 24 tins. 425 grams 8...

  11. 19 CFR 159.22 - Net weights and tares.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... tins imported from Spain: The following schedule drained weight shall be used as the Customs dutiable... in tins and such drained weight being the allowance made in liquidation for tare for water: Size can Drained weight 3 kilo 13.6 kilograms-case of 6 tins. 794 grams 16.7 kilograms-case of 24 tins. 425 grams 8...

  12. 77 FR 42990 - Significant New Use Rules on Certain Chemical Substances

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-23

    ... Toxic Substances Control Act (TSCA) for the chemical substances rutile, tin zinc, calcium-doped (CAS No. 389623-01-2) and rutile, tin zinc, sodium-doped (CAS No. 389623-07-8) which were the subject of..., tin zinc, calcium-doped (PMN P-06-36; CAS No. 389623-01-2) and rutile, tin zinc, sodium-doped (PMN P...

  13. Effect of alloying elements on the physicomechanical properties of copper and tin bronze

    NASA Astrophysics Data System (ADS)

    Ri, Kh.; Komkov, V. G.; Ri, E. Kh.

    2014-09-01

    The effect of alloying elements (Al, Si, Mn, Zn, Ni, As) on the physicomechanical properties of copper and tin bronze (6 wt % Sn) is studied. These alloying elements are found to increase the hardness and the microhardness of the structural constituents of Cu- X alloys due to hardening the α solid solution and eutectoid, and this effect of alloying elements is most effective in tin bronze. Alloyed copper and tin bronze have a lower thermal conductivity and corrosion resistance as compared to plain copper and tin bronze.

  14. Stannosis in Hearth Tinners

    PubMed Central

    Cole, C. W. D.; Davies, J. V. S. A.; Kipling, M. D.; Ritchie, G. L.

    1964-01-01

    There have been no published reports of stannosis in tinners. In this paper its occurrence in hearth tinners is described. In hearth tinning molten tin is poured into heated iron hollow-ware and smoothed over the internal surface with a cork bat. Ammonium chloride powder is used as a flux. It is considered that fumes arising in the process from the reaction of the flux and the tin caused a concentration of tin compounds in the atmosphere, and this was the mechanism by which stannosis was produced. The literature on stannosis and tinning is reviewed. Images PMID:14180484

  15. VO2 /TiN Plasmonic Thermochromic Smart Coatings for Room-Temperature Applications.

    PubMed

    Hao, Qi; Li, Wan; Xu, Huiyan; Wang, Jiawei; Yin, Yin; Wang, Huaiyu; Ma, Libo; Ma, Fei; Jiang, Xuchuan; Schmidt, Oliver G; Chu, Paul K

    2018-03-01

    Vanadium dioxide/titanium nitride (VO 2 /TiN) smart coatings are prepared by hybridizing thermochromic VO 2 with plasmonic TiN nanoparticles. The VO 2 /TiN coatings can control infrared (IR) radiation dynamically in accordance with the ambient temperature and illumination intensity. It blocks IR light under strong illumination at 28 °C but is IR transparent under weak irradiation conditions or at a low temperature of 20 °C. The VO 2 /TiN coatings exhibit a good integral visible transmittance of up to 51% and excellent IR switching efficiency of 48% at 2000 nm. These unique advantages make VO 2 /TiN promising as smart energy-saving windows. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Molten tin reprocessing of spent nuclear fuel elements

    DOEpatents

    Heckman, Richard A.

    1983-01-01

    A method and apparatus for reprocessing spent nuclear fuel is described. Within a containment vessel, a solid plug of tin and nitride precipitates supports a circulating bath of liquid tin therein. Spent nuclear fuel is immersed in the liquid tin under an atmosphere of nitrogen, resulting in the formation of nitride precipitates. The layer of liquid tin and nitride precipitates which interfaces the plug is solidified and integrated with the plug. Part of the plug is melted, removing nitride precipitates from the containment vessel, while a portion of the plug remains solidified to support the liquid tin and nitride precipitates remaining in the containment vessel. The process is practiced numerous times until substantially all of the precipitated nitrides are removed from the containment vessel.

  17. Estimating the Probability of Electrical Short Circuits from Tin Whiskers. Part 2

    NASA Technical Reports Server (NTRS)

    Courey, Karim J.; Asfour, Shihab S.; Onar, Arzu; Bayliss, Jon A.; Ludwig, Larry L.; Wright, Maria C.

    2010-01-01

    To comply with lead-free legislation, many manufacturers have converted from tin-lead to pure tin finishes of electronic components. However, pure tin finishes have a greater propensity to grow tin whiskers than tin-lead finishes. Since tin whiskers present an electrical short circuit hazard in electronic components, simulations have been developed to quantify the risk of said short circuits occurring. Existing risk simulations make the assumption that when a free tin whisker has bridged two adjacent exposed electrical conductors, the result is an electrical short circuit. This conservative assumption is made because shorting is a random event that had an unknown probability associated with it. Note however that due to contact resistance electrical shorts may not occur at lower voltage levels. In our first article we developed an empirical probability model for tin whisker shorting. In this paper, we develop a more comprehensive empirical model using a refined experiment with a larger sample size, in which we studied the effect of varying voltage on the breakdown of the contact resistance which leads to a short circuit. From the resulting data we estimated the probability distribution of an electrical short, as a function of voltage. In addition, the unexpected polycrystalline structure seen in the focused ion beam (FIB) cross section in the first experiment was confirmed in this experiment using transmission electron microscopy (TEM). The FIB was also used to cross section two card guides to facilitate the measurement of the grain size of each card guide's tin plating to determine its finish .

  18. Developing an Empirical Model for Estimating the Probability of Electrical Short Circuits from Tin Whiskers. Part 2

    NASA Technical Reports Server (NTRS)

    Courey, Karim J.; Asfour, Shihab S.; Onar, Arzu; Bayliss, Jon A.; Ludwig, Larry L.; Wright, Maria C.

    2009-01-01

    To comply with lead-free legislation, many manufacturers have converted from tin-lead to pure tin finishes of electronic components. However, pure tin finishes have a greater propensity to grow tin whiskers than tin-lead finishes. Since tin whiskers present an electrical short circuit hazard in electronic components, simulations have been developed to quantify the risk of said short circuits occurring. Existing risk simulations make the assumption that when a free tin whisker has bridged two adjacent exposed electrical conductors, the result is an electrical short circuit. This conservative assumption is made because shorting is a random event that had an unknown probability associated with it. Note however that due to contact resistance electrical shorts may not occur at lower voltage levels. In our first article we developed an empirical probability model for tin whisker shorting. In this paper, we develop a more comprehensive empirical model using a refined experiment with a larger sample size, in which we studied the effect of varying voltage on the breakdown of the contact resistance which leads to a short circuit. From the resulting data we estimated the probability distribution of an electrical short, as a function of voltage. In addition, the unexpected polycrystalline structure seen in the focused ion beam (FIB) cross section in the first experiment was confirmed in this experiment using transmission electron microscopy (TEM). The FIB was also used to cross section two card guides to facilitate the measurement of the grain size of each card guide's tin plating to determine its finish.

  19. 21 CFR 184.1845 - Stannous chloride (anhydrous and dihydrated).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    .... Anhydrous stannous chloride (SnCl2, CAS Reg. No. 7772-99-8) is the chloride salt of metallic tin. It is prepared by reacting molten tin with either chlorine or gaseous tin tetrachloride. Dihydrated stannous chloride (SnCl2·2H2O, CAS Reg. No. 10025-0969-091) is the chloride salt of metallic tin that contains two...

  20. 21 CFR 189.301 - Tin-coated lead foil capsules for wine bottles.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Tin-coated lead foil capsules for wine bottles... Substances Prohibited From Indirect Addition to Human Food Through Food-Contact Surfaces § 189.301 Tin-coated lead foil capsules for wine bottles. (a) Tin-coated lead foil is composed of a lead foil coated on one...

  1. 21 CFR 189.301 - Tin-coated lead foil capsules for wine bottles.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Tin-coated lead foil capsules for wine bottles. 189... Substances Prohibited From Indirect Addition to Human Food Through Food-Contact Surfaces § 189.301 Tin-coated lead foil capsules for wine bottles. (a) Tin-coated lead foil is composed of a lead foil coated on one...

  2. 21 CFR 189.301 - Tin-coated lead foil capsules for wine bottles.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Tin-coated lead foil capsules for wine bottles... Substances Prohibited From Indirect Addition to Human Food Through Food-Contact Surfaces § 189.301 Tin-coated lead foil capsules for wine bottles. (a) Tin-coated lead foil is composed of a lead foil coated on one...

  3. 31 CFR 256.13 - Are agencies required to supply a taxpayer identification number (TIN) when submitting a request...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... taxpayer identification number (TIN) when submitting a request for payment? 256.13 Section 256.13 Money and... BILLS Requesting Payments § 256.13 Are agencies required to supply a taxpayer identification number (TIN) when submitting a request for payment? Yes, agencies must include a valid TIN on all requests for...

  4. 21 CFR 184.1845 - Stannous chloride (anhydrous and dihydrated).

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    .... Anhydrous stannous chloride (SnCl2, CAS Reg. No. 7772-99-8) is the chloride salt of metallic tin. It is prepared by reacting molten tin with either chlorine or gaseous tin tetrachloride. Dihydrated stannous chloride (SnCl2·2H2O, CAS Reg. No. 10025-69-1) is the chloride salt of metallic tin that contains two...

  5. 31 CFR 359.53 - Are taxpayer identification numbers (TINs) required for registration of book-entry Series I...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (TINs) required for registration of book-entry Series I savings bonds? 359.53 Section 359.53 Money and... Savings Bonds § 359.53 Are taxpayer identification numbers (TINs) required for registration of book-entry Series I savings bonds? The TIN of each person named in the registration is required to purchase a book...

  6. 31 CFR 351.68 - Are taxpayer identification numbers (TINs) required for registration of book-entry Series EE...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (TINs) required for registration of book-entry Series EE savings bonds? 351.68 Section 351.68 Money and... Savings Bonds § 351.68 Are taxpayer identification numbers (TINs) required for registration of book-entry Series EE savings bonds? The TIN of each person named in the registration is required to purchase a book...

  7. 76 FR 60001 - Certain Tin Mill Products From Japan; Final Results of the Second Expedited Sunset Review of the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-28

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-588-854] Certain Tin Mill Products... duty order on certain tin mill products from Japan, pursuant to section 751(c) of the Tariff [[Page... on certain tin mill products from Japan pursuant to section 751(c) of the Act. See Initiation of Five...

  8. 31 CFR 256.13 - Are agencies required to supply a taxpayer identification number (TIN) when submitting a request...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... taxpayer identification number (TIN) when submitting a request for payment? 256.13 Section 256.13 Money and... BILLS Requesting Payments § 256.13 Are agencies required to supply a taxpayer identification number (TIN) when submitting a request for payment? Yes, agencies must include a valid TIN on all requests for...

  9. 31 CFR 359.53 - Are taxpayer identification numbers (TINs) required for registration of book-entry Series I...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (TINs) required for registration of book-entry Series I savings bonds? 359.53 Section 359.53 Money and... Savings Bonds § 359.53 Are taxpayer identification numbers (TINs) required for registration of book-entry Series I savings bonds? The TIN of each person named in the registration is required to purchase a book...

  10. 21 CFR 184.1845 - Stannous chloride (anhydrous and dihydrated).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    .... Anhydrous stannous chloride (SnCl2, CAS Reg. No. 7772-99-8) is the chloride salt of metallic tin. It is prepared by reacting molten tin with either chlorine or gaseous tin tetrachloride. Dihydrated stannous chloride (SnCl2·2H2O, CAS Reg. No. 10025-0969-091) is the chloride salt of metallic tin that contains two...

  11. 31 CFR 256.13 - Are agencies required to supply a taxpayer identification number (TIN) when submitting a request...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... taxpayer identification number (TIN) when submitting a request for payment? 256.13 Section 256.13 Money and... BILLS Requesting Payments § 256.13 Are agencies required to supply a taxpayer identification number (TIN) when submitting a request for payment? Yes, agencies must include a valid TIN on all requests for...

  12. 31 CFR 351.68 - Are taxpayer identification numbers (TINs) required for registration of book-entry Series EE...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (TINs) required for registration of book-entry Series EE savings bonds? 351.68 Section 351.68 Money and... EE Savings Bonds § 351.68 Are taxpayer identification numbers (TINs) required for registration of book-entry Series EE savings bonds? The TIN of each person named in the registration is required to...

  13. 31 CFR 359.53 - Are taxpayer identification numbers (TINs) required for registration of book-entry Series I...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (TINs) required for registration of book-entry Series I savings bonds? 359.53 Section 359.53 Money and... Savings Bonds § 359.53 Are taxpayer identification numbers (TINs) required for registration of book-entry Series I savings bonds? The TIN of each person named in the registration is required to purchase a book...

  14. 31 CFR 256.13 - Are agencies required to supply a taxpayer identification number (TIN) when submitting a request...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... taxpayer identification number (TIN) when submitting a request for payment? 256.13 Section 256.13 Money and... BILLS Requesting Payments § 256.13 Are agencies required to supply a taxpayer identification number (TIN) when submitting a request for payment? Yes, agencies must include a valid TIN on all requests for...

  15. 21 CFR 189.301 - Tin-coated lead foil capsules for wine bottles.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Tin-coated lead foil capsules for wine bottles... Substances Prohibited From Indirect Addition to Human Food Through Food-Contact Surfaces § 189.301 Tin-coated lead foil capsules for wine bottles. (a) Tin-coated lead foil is composed of a lead foil coated on one...

  16. 31 CFR 351.68 - Are taxpayer identification numbers (TINs) required for registration of book-entry Series EE...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (TINs) required for registration of book-entry Series EE savings bonds? 351.68 Section 351.68 Money and... Savings Bonds § 351.68 Are taxpayer identification numbers (TINs) required for registration of book-entry Series EE savings bonds? The TIN of each person named in the registration is required to purchase a book...

  17. 78 FR 34355 - Applications for New Awards; National Institute on Disability and Rehabilitation Research...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-07

    ... (TIN); b. Register both your DUNS number and TIN with the Central Contractor Registry (CCR)--and, after...; c. Provide your DUNS number and TIN on your application; and d. Maintain an active CRR or SAM... organization, you can obtain a TIN from the Internal Revenue Service. If you are an individual, you can obtain...

  18. 31 CFR 359.53 - Are taxpayer identification numbers (TINs) required for registration of book-entry Series I...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (TINs) required for registration of book-entry Series I savings bonds? 359.53 Section 359.53 Money and... Savings Bonds § 359.53 Are taxpayer identification numbers (TINs) required for registration of book-entry Series I savings bonds? The TIN of each person named in the registration is required to purchase a book...

  19. 31 CFR 351.68 - Are taxpayer identification numbers (TINs) required for registration of book-entry Series EE...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (TINs) required for registration of book-entry Series EE savings bonds? 351.68 Section 351.68 Money and... Savings Bonds § 351.68 Are taxpayer identification numbers (TINs) required for registration of book-entry Series EE savings bonds? The TIN of each person named in the registration is required to purchase a book...

  20. 31 CFR 359.53 - Are taxpayer identification numbers (TINs) required for registration of book-entry Series I...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (TINs) required for registration of book-entry Series I savings bonds? 359.53 Section 359.53 Money and... Savings Bonds § 359.53 Are taxpayer identification numbers (TINs) required for registration of book-entry Series I savings bonds? The TIN of each person named in the registration is required to purchase a book...

  1. 31 CFR 256.13 - Are agencies required to supply a taxpayer identification number (TIN) when submitting a request...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... taxpayer identification number (TIN) when submitting a request for payment? 256.13 Section 256.13 Money and... BILLS Requesting Payments § 256.13 Are agencies required to supply a taxpayer identification number (TIN) when submitting a request for payment? Yes, agencies must include a valid TIN on all requests for...

  2. 21 CFR 184.1845 - Stannous chloride (anhydrous and dihydrated).

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    .... Anhydrous stannous chloride (SnCl2, CAS Reg. No. 7772-99-8) is the chloride salt of metallic tin. It is prepared by reacting molten tin with either chlorine or gaseous tin tetrachloride. Dihydrated stannous chloride (SnCl2·2H2O, CAS Reg. No. 10025-69-1) is the chloride salt of metallic tin that contains two...

  3. Tin Whisker Testing and Modeling

    DTIC Science & Technology

    2015-11-01

    FINAL REPORT Tin Whisker Testing and Modeling SERDP Project WP-1753 NOVEMBER 2015 Stephan J. Meschter Polina Snugovsky BAE Systems...lead (Pb) is that component manufacturers have primarily switched to tin -rich finishes and solder alloys in commercial-off-the-shelf products...Unfortunately, this creates an increased risk of tin whisker formation that can result in undesirable electrical failures unless military and aerospace

  4. 31 CFR 351.68 - Are taxpayer identification numbers (TINs) required for registration of book-entry Series EE...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (TINs) required for registration of book-entry Series EE savings bonds? 351.68 Section 351.68 Money and... Savings Bonds § 351.68 Are taxpayer identification numbers (TINs) required for registration of book-entry Series EE savings bonds? The TIN of each person named in the registration is required to purchase a book...

  5. 21 CFR 178.2650 - Organotin stabilizers in vinyl chloride plastics.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ...-octyl)tin S,S′-bis(isooctylmercaptoacetate) is an octyltin chemical having 15.1 to 16.4 percent by weight of tin (Sn) and having 8.1 to 8.9 percent by weight of mercapto sulfur. It is made from di(n-octyl)tin dichloride or di(n-octyl)tin oxide. The isooctyl radical in the mercaptoacetate is derived from...

  6. Synthesis of tin (II) oxide from tin (II) oxohydroxide

    NASA Astrophysics Data System (ADS)

    Kuznetsova, Svetlana; Lisitsa, Konstantin

    2017-11-01

    Sufficiently limited use of tin (II) oxide is associated with the difficulties of its preparation without impurities of tin (IV) oxide. Understanding the cause of the oxidation process will make it possible to develop methods for obtaining SnO without impurities. The influence of ammonium chloride concentration in the suspension on the oxide composition was investigated. The temperature of oxidation (400 °C) on the air and temperature decomposition in the argon (350 °C) of Sn6O4(OH)4 in the solid phase were determined by the thermal analysis method. The decomposition temperature of the oxyhydroxide in the suspension of ammonium chloride does not exceed 100 °C. An increase in the content of ammonium chloride in an aqueous solution leads to an increase i n the solubility of oxohydroxide and leads to an increase in pH. The suspensions of Sn6O4(OH)4 were subjected to heat treatment on a sand bath and under microwave irradiation. Samples of tin oxide were obtained. The quantitative composition of the mixture of tin oxides was determined. The research also highlights emphasizes that the oxidation of tin (II) to tin (IV) is associated with the dissolved oxygen content in the suspension.

  7. Wear of tin coating and Al-Si alloy substrate against carburized steel under mixed lubrication

    NASA Astrophysics Data System (ADS)

    Wang, Q.; Cheng, H. S.; Fine, M. E.

    1994-04-01

    Tin coatings on Al-Si alloys are widely used in the automotive industries. The soft tin coating and the harder substrate alloy form a tribological system with the advantages of low friction and reasonably high load-bearing capacity. Wear tests of tin coated Al-Si Z332 alloy in conformal contact against carburized 1016 steel have been carried out under mixed lubrications with SAE 10W30 oil to study the wear mechanisms. Two major wear mechanisms, uniform wear of the tin coating due to micro-plowing and spall pitting related to the substrate are found to contribute to the bearing material loss when the fluid lubrication film is relatively thick (Lambda about 1.6). Under conditions of thinner films (Lambda approximately = 0.8), some local coating debonding occurs. The pitting and local coating debounding are closely related to fracture in the substrate. The bonding between silicon and tin seems to be weaker than between aluminum and tin. During wear, oxidation occurs.

  8. Fabrication of TiN nanorods by electrospinning and their electrochemical properties

    NASA Astrophysics Data System (ADS)

    Sun, Dongfei; Lang, Junwei; Yan, Xingbin; Hu, Litian; Xue, Qunji

    2011-05-01

    TiN nanorods were synthesized using electrospinning technique followed by thermolysis in different atmospheres. A dimethyl formamide-ethanol solution of poly-(vinyl pyrrolidone) and Ti (IV)-isopropoxide was used as the electrospinning precursor solution and as-spun nanofibers were calcined at 500 °C in air to generate TiO 2 nanofibers. Subsequently, a conversion from TiO 2 nanofibers to TiN nanorods was employed by the nitridation treatment at 600˜1400 °C in ammonia atmosphere. A typical characteristic of the final products was that the pristine nanofibers were cut into nanorods. The conversion from TiO 2 to TiN was realized when the nitridation temperature was above 800 °C. As-prepared nanorods were composed of TiN nano-crystallites and the average crystallite size gradually increased with the increase of the nitridation temperature. Electrochemical properties of TiN nanorods showed strong dependence on the nitridation temperature. The maximum value of the specific capacitance was obtained from the TiN nanorods prepared at 800 °C.

  9. Effect of doping of tin on optoelectronic properties of indium oxide: DFT study

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tripathi, Madhvendra Nath, E-mail: ommadhav27@gmail.com

    2015-06-24

    Indium tin oxide is widely used transparent conductor. Experimentally observed that 6% tin doping in indium oxide is suitable for optoelectronic applications and more doping beyond this limit degrades the optoelectronic property. The stoichiometry (In{sub 32-x}Sn{sub x}O{sub 48+x/2}; x=0-6) is taken to understand the change in lattice parameter, electronic structure, and optical property of ITO. It is observed that lattice parameter increases and becomes constant after 6% tin doping that is in good agreement of the experimental observation. The electronic structure calculation shows that the high tin doping in indium oxide adversely affects the dispersive nature of the bottom ofmore » conduction band of pure indium oxide and decreases the carrier mobility. Optical calculations show that transmittance goes down upto 60% for the tin concentration more than 6%. The present paper shows that how more than 6% tin doping in indium oxide adversely affects the optoelectronic property of ITO.« less

  10. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rohwer, Lauren E. S.; Martin, James E.

    In this study, reliable methods for tin whisker mitigation are needed for applications that utilize tin-plated commercial components. Tin can grow whiskers that can lead to electrical shorting, possibly causing critical systems to fail catastrophically. The mechanisms of tin whisker growth are unclear and this makes prediction of the lifetimes of critical components uncertain. The development of robust methods for tin whisker mitigation is currently the best approach to eliminating the risk of shorting. Current mitigation methods are based on unfilled polymer coatings that are not impenetrable to tin whiskers. In this paper we report tin whisker mitigation results formore » several filled polymer coatings. The whisker-penetration resistance of the coatings was evaluated at elevated temperature and high humidity and under temperature cycling conditions. The composite coatings comprised Ni and MgF 2-coated Al/Ni/Al platelets in epoxy resin or silicone rubber. In addition to improved whisker mitigation, these platelet composites have enhanced thermal conductivity and dielectric constant compared with unfilled polymers.« less

  11. Amorphous tin-cadmium oxide films and the production thereof

    DOEpatents

    Li, Xiaonan; Gessert, Timothy A

    2013-10-29

    A tin-cadmium oxide film having an amorphous structure and a ratio of tin atoms to cadmium atoms of between 1:1 and 3:1. The tin-cadmium oxide film may have an optical band gap of between 2.7 eV and 3.35 eV. The film may also have a charge carrier concentration of between 1.times.10.sup.20 cm.sup.-3 and 2.times.10.sup.20 cm.sup.-3. The tin cadmium oxide film may also exhibit a Hall mobility of between 40 cm.sup.2V.sup.-1 s.sup.-1 and 60 cm.sup.2V.sup.-1 s.sup.-1. Also disclosed is a method of producing an amorphous tin-cadmium oxide film as described and devices using same.

  12. Nucleation and growth of tin whiskers

    NASA Astrophysics Data System (ADS)

    Cheng, Jing; Vianco, Paul T.; Zhang, Bei; Li, James C. M.

    2011-06-01

    Pure tin film of one micron thick was evaporated onto a silicon substrate with chromium and nickel underlayers. The tinned silicon disk was bent by applying a dead load at the center and supported below around the edge to apply biaxial compressive stresses to the tin layer. After 180 C vacuum annealing for 1,2,4,6, and 8 weeks, tin whiskers/hillocks grew. A quantitative method revealed that the overall growth rate decreased with time with a tendency for saturation. A review of the literature showed in general, tin whisker growth has a nucleation period, a growth period and a period of saturation, very similar to recrystallization or phase transformation. In fact we found our data fit Avrami equation very well. This equation shows that the nucleation period was the first week.

  13. Molten tin reprocessing of spent nuclear fuel elements. [Patent application; continuous process

    DOEpatents

    Heckman, R.A.

    1980-12-19

    A method and apparatus for reprocessing spent nuclear fuel is described. Within a containment vessel, a solid plug of tin and nitride precipitates supports a circulating bath of liquid tin therein. Spent nuclear fuel is immersed in the liquid tin under an atmosphere of nitrogen, resulting in the formation of nitride precipitates. The layer of liquid tin and nitride precipitates which interfaces the plug is solidified and integrated with the plug. Part of the plug is melted, removing nitride precipitates from the containment vessel, while a portion of the plug remains solidified to support te liquid tin and nitride precipitates remaining in the containment vessel. The process is practiced numerous times until substantially all of the precipitated nitrides are removed from the containment vessel.

  14. Resonance of an unshared electron pair between two atoms connected by a single bond

    PubMed Central

    Pauling, Linus

    1983-01-01

    The reported structure of the dimer of a compound of bicovalent tin indicates that the tin-tin bond is of a new type. It can be described as involving resonance between two structures in which there is transfer of an electron pair from one tin atom to the other. The tin atoms are connected by a single covalent bond (each also forms two covalent bonds with carbon atoms), and an unshared electron pair resonates between the fourth sp3 orbitals of the two atoms. Similar structures probably occur in digermene and distannene. PMID:16593329

  15. 47 CFR 1.8002 - Obtaining an FRN.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... and title, address, and taxpayer identifying number (TIN) must be provided. For individuals, the TIN... deems appropriate for its business operations. Each subsidiary with a different TIN must obtain a...

  16. 47 CFR 1.8002 - Obtaining an FRN.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... and title, address, and taxpayer identifying number (TIN) must be provided. For individuals, the TIN... deems appropriate for its business operations. Each subsidiary with a different TIN must obtain a...

  17. 21 CFR 178.2650 - Organotin stabilizers in vinyl chloride plastics.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...) (1), (2), (3), (4), (5), (6), and (7) of this section. (1) Di(n-octyl)tin S,S′-bis(isooctylmercaptoacetate) is an octyltin chemical having 15.1 to 16.4 percent by weight of tin (Sn) and having 8.1 to 8.9 percent by weight of mercapto sulfur. It is made from di(n-octyl)tin dichloride or di(n-octyl)tin oxide...

  18. NASA Goddard Space Flight Center Tin Whisker (and Other Metal Whisker) Homepage

    NASA Technical Reports Server (NTRS)

    Brusse, Jay; Sampson, Mike; Leidecker, Henning; Kadesch, Jong

    2004-01-01

    This website provides information about tin whiskers and related research. The independent research performed during the past 50+ years is so vast that it is impractical to cover all aspects of tin whiskers in this one resource. Therefore, the absence of information in this website about a particular aspect of tin whiskers should NOT be construed as evidence of absence.

  19. 21 CFR 178.2650 - Organotin stabilizers in vinyl chloride plastics.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ...) (1), (2), (3), (4), (5), (6), and (7) of this section. (1) Di(n-octyl)tin S,S′-bis(isooctylmercaptoacetate) is an octyltin chemical having 15.1 to 16.4 percent by weight of tin (Sn) and having 8.1 to 8.9 percent by weight of mercapto sulfur. It is made from di(n-octyl)tin dichloride or di(n-octyl)tin oxide...

  20. 31 CFR 359.28 - Are taxpayer identification numbers (TINs) required for the registration of definitive Series I...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (TINs) required for the registration of definitive Series I savings bonds? 359.28 Section 359.28 Money... Definitive Series I Savings Bonds § 359.28 Are taxpayer identification numbers (TINs) required for the... include the TIN of the owner or first-named coowner. If the bond was purchased as a gift or award and the...

  1. 31 CFR 359.28 - Are taxpayer identification numbers (TINs) required for the registration of definitive Series I...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (TINs) required for the registration of definitive Series I savings bonds? 359.28 Section 359.28 Money... Definitive Series I Savings Bonds § 359.28 Are taxpayer identification numbers (TINs) required for the... include the TIN of the owner or first-named coowner. If the bond is being purchased as a gift or award and...

  2. 31 CFR 359.28 - Are taxpayer identification numbers (TINs) required for the registration of definitive Series I...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (TINs) required for the registration of definitive Series I savings bonds? 359.28 Section 359.28 Money... Definitive Series I Savings Bonds § 359.28 Are taxpayer identification numbers (TINs) required for the... include the TIN of the owner or first-named coowner. If the bond was purchased as a gift or award and the...

  3. 31 CFR 359.28 - Are taxpayer identification numbers (TINs) required for the registration of definitive Series I...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (TINs) required for the registration of definitive Series I savings bonds? 359.28 Section 359.28 Money... Definitive Series I Savings Bonds § 359.28 Are taxpayer identification numbers (TINs) required for the... include the TIN of the owner or first-named coowner. If the bond is being purchased as a gift or award and...

  4. 21 CFR 189.301 - Tin-coated lead foil capsules for wine bottles.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Tin-coated lead foil capsules for wine bottles... Addition to Human Food Through Food-Contact Surfaces § 189.301 Tin-coated lead foil capsules for wine bottles. (a) Tin-coated lead foil is composed of a lead foil coated on one or both sides with a thin layer...

  5. 21 CFR 178.2650 - Organotin stabilizers in vinyl chloride plastics.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ...) (1), (2), (3), (4), (5), (6), and (7) of this section. (1) Di(n-octyl)tin S,S′-bis(isooctylmercaptoacetate) is an octyltin chemical having 15.1 to 16.4 percent by weight of tin (Sn) and having 8.1 to 8.9 percent by weight of mercapto sulfur. It is made from di(n-octyl)tin dichloride or di(n-octyl)tin oxide...

  6. 21 CFR 178.2650 - Organotin stabilizers in vinyl chloride plastics.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ...) (1), (2), (3), (4), (5), (6), and (7) of this section. (1) Di(n-octyl)tin S,S′-bis(isooctylmercaptoacetate) is an octyltin chemical having 15.1 to 16.4 percent by weight of tin (Sn) and having 8.1 to 8.9 percent by weight of mercapto sulfur. It is made from di(n-octyl)tin dichloride or di(n-octyl)tin oxide...

  7. 76 FR 75794 - Significant New Use Rules on Certain Chemical Substances; Withdrawal of Two Chemical Substances

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-05

    ...) for chemical substances which were the subject of premanufacture notices (PMNs), i.e., rutile, tin zinc, calcium-doped (PMN P-06-36; CAS No. 389623-01-2) and rutile, tin zinc, sodium-doped (PMN P-06-37... rutile, tin zinc, calcium-doped (PMN P-06-36; CAS No. 389623-01-2) and rutile, tin zinc, sodium-doped...

  8. 31 CFR 359.28 - Are taxpayer identification numbers (TINs) required for the registration of definitive Series I...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (TINs) required for the registration of definitive Series I savings bonds? 359.28 Section 359.28 Money... Definitive Series I Savings Bonds § 359.28 Are taxpayer identification numbers (TINs) required for the... include the TIN of the owner or first-named coowner. If the bond was purchased as a gift or award and the...

  9. Shielding properties of lead-free protective clothing and their impact on radiation doses

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Schlattl, Helmut; Zankl, Maria; Eder, Heinrich

    2007-11-15

    The shielding properties of two different lead-free materials--tin and a compound of 80% tin and 20% bismuth--for protective clothing are compared with those of lead for three typical x-ray spectra generated at tube voltages of 60, 75, and 120 kV. Three different quantities were used to compare the shielding capability of the different materials: (1) Air-kerma attenuation factors in narrow-beam geometry, (2) air-kerma attenuation factors in broad-beam geometry, and (3) ratios of organ and effective doses in the human body for a whole-body irradiation with a parallel beam directed frontally at the body. The thicknesses of tin (0.45 mm) andmore » the tin/bismuth compound (0.41 mm) to be compared against lead correspond to a lead equivalence value of 0.35 mm for the 75 kV spectrum. The narrow-beam attenuation factors for 0.45 mm tin are 54% and 32% lower than those for 0.35 mm lead for 60 and 120 kV; those for 0.41 mm tin/bismuth are 12% and 32% lower, respectively. The decrease of the broad-beam air-kerma attenuation factors compared to lead is 74%, 46%, and 41% for tin and 42%, 26%, and 33% for tin/bismuth and the spectra at 60, 75, and 120 kV, respectively. Therefore, it is recommended that the characterization of the shielding potential of a material should be done by measurements in broad-beam geometry. Since the secondary radiation that is mainly responsible for the shielding reduction in broad-beam geometry is of low penetrability, only more superficially located organs receive significantly enhanced doses. The increase for the dose to the glandular breast tissue (female) compared to being shielded by lead is 143%, 37%, and 45% when shielded by tin, and 35%, 15%, and 39% when shielded by tin/bismuth for 60, 75, and 120 kV, respectively. The effective dose rises by 60%, 6%, and 38% for tin, and 14%, 3% and, 35% for tin/bismuth shielding, respectively.« less

  10. Tinned Fruit Consumption and Mortality in Three Prospective Cohorts

    PubMed Central

    Aasheim, Erlend T.; Sharp, Stephen J.; Appleby, Paul N.; Shipley, Martin J.; Lentjes, Marleen A. H.; Khaw, Kay-Tee; Brunner, Eric; Key, Tim J.; Wareham, Nicholas J.

    2015-01-01

    Dietary recommendations to promote health include fresh, frozen and tinned fruit, but few studies have examined the health benefits of tinned fruit. We therefore studied the association between tinned fruit consumption and mortality. We followed up participants from three prospective cohorts in the United Kingdom: 22,421 participants from the European Prospective Investigation into Cancer and Nutrition (EPIC)-Norfolk cohort (1993–2012), 52,625 participants from the EPIC-Oxford cohort (1993–2012), and 7440 participants from the Whitehall II cohort (1991–2012), all reporting no history of heart attack, stroke, or cancer when entering these studies. We estimated the association between frequency of tinned fruit consumption and all cause mortality (primary outcome measure) using Cox regression models within each cohort, and pooled hazard ratios across cohorts using random-effects meta-analysis. Tinned fruit consumption was assessed with validated food frequency questionnaires including specific questions about tinned fruit. During 1,305,330 person years of follow-up, 8857 deaths occurred. After adjustment for lifestyle factors and risk markers the pooled hazard ratios (95% confidence interval) of all cause mortality compared with the reference group of tinned fruit consumption less often than one serving per month were: 1.05 (0.99, 1.12) for one to three servings per month, 1.10 (1.03, 1.18) for one serving per week, and 1.13 (1.04, 1.23) for two or more servings per week. Analysis of cause-specific mortality showed that tinned fruit consumption was associated with mortality from cardiovascular causes and from non-cardiovascular, non-cancer causes. In a pooled analysis of three prospective cohorts from the United Kingdom self-reported tinned fruit consumption in the 1990s was weakly but positively associated with mortality during long-term follow-up. These findings raise questions about the evidence underlying dietary recommendations to promote tinned fruit consumption as part of a healthy diet. PMID:25714554

  11. 7 CFR 1780.33 - Application requirements.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... time lines. (g) The applicant's Internal Revenue Service Taxpayer Identification Number (TIN). The TIN will be used by the Agency to assign a case number which will be the applicant's or transferee's TIN...

  12. 7 CFR 1780.33 - Application requirements.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... time lines. (g) The applicant's Internal Revenue Service Taxpayer Identification Number (TIN). The TIN will be used by the Agency to assign a case number which will be the applicant's or transferee's TIN...

  13. 7 CFR 1780.33 - Application requirements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... time lines. (g) The applicant's Internal Revenue Service Taxpayer Identification Number (TIN). The TIN will be used by the Agency to assign a case number which will be the applicant's or transferee's TIN...

  14. 7 CFR 1780.33 - Application requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... time lines. (g) The applicant's Internal Revenue Service Taxpayer Identification Number (TIN). The TIN will be used by the Agency to assign a case number which will be the applicant's or transferee's TIN...

  15. 7 CFR 1780.33 - Application requirements.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... time lines. (g) The applicant's Internal Revenue Service Taxpayer Identification Number (TIN). The TIN will be used by the Agency to assign a case number which will be the applicant's or transferee's TIN...

  16. Core Temperature Measurement During Submaximal Exercise: Esophageal, Rectal, and Intestinal Temperatures

    NASA Technical Reports Server (NTRS)

    Lee, Stuart M. C.; Williams, W. Jon; Schneider, Suzanne M.

    2000-01-01

    The purpose of this study was to determine if intestinal temperature (Tin) might be in acceptable alternative to esophageal (Tes) and rectal temperature (Trec) to assess thermoregulation during supine exercise. We hypothesized that Tin would have values similar to Tes and a response time similar to Trec, but the rate of temperature change across time would not be different between measurement sites. Seven subjects completed a continuous supine protocol of 20 min of rest, 20 min of cycle exercise at 40% peak oxygen consumption (VO2pk), 20 min of cycle exercise at 65% V02pk, and 20 min of recovery. Tes, Trec, and Tin were recorded each min throughout the test. Temperatures were not different after 20 min of rest, but Trec was less than the Tes and Tin at the end of the 40% and 65% VO2pk stages. After 20 min of recovery, Tes was less than either Trec or Tin, which were not different from each other. Time to threshold for increased temperature from rest was greater for Trec than Tes but not different from Tin. Time to reach peak temperature was greater for Tin and Trec than Tes. Similarly, time to a decrease in temperature after exercise was greater for Trec than Tes, but not different from Tin. The rate of temperature change from threshold to the end of the 40% VO2pk stage was not different between measurement sites. However, the rate of change during recovery was more negative for Tes than Tin and Trec, which were different from each other. Measurement of Tin may he an acceptable alternative to Tes and Trec with an understanding of its limitations.

  17. Nanostructured antistatic and antireflective thin films made of indium tin oxide and silica over-coat layer

    NASA Astrophysics Data System (ADS)

    Cho, Young-Sang; Hong, Jeong-Jin; Yang, Seung-Man; Choi, Chul-Jin

    2010-08-01

    Stable dispersion of colloidal indium tin oxide nanoparticles was prepared by using indium tin oxide nanopowder, organic solvent, and suitable dispersants through attrition process. Various comminution parameters during the attrition step were studied to optimize the process for the stable dispersion of indium tin oxide sol. The transparent and conductive films were fabricated on glass substrate using the indium tin oxide sol by spin coating process. To obtain antireflective function, partially hydrolyzed alkyl silicate was deposited as over-coat layer on the pre-fabricated indium tin oxide film by spin coating technique. This double-layered structure of the nanostructured film was characterized by measuring the surface resistance and reflectance spectrum in the visible wavelength region. The final film structure was enough to satisfy the TCO regulations for EMI shielding purposes.

  18. 40 CFR 721.10297 - Tin, C16-18 and C18-unsatd. fatty acids castor-oil fatty acids complexes.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Tin, C16-18 and C18-unsatd. fatty... SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10297 Tin, C16-18 and C18-unsatd... to reporting. (1) The chemical substance identified as tin, C16-18 and C18-unsatd. fatty acids castor...

  19. 40 CFR 721.10297 - Tin, C16-18 and C18-unsatd. fatty acids castor-oil fatty acids complexes.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Tin, C16-18 and C18-unsatd. fatty... SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10297 Tin, C16-18 and C18-unsatd... to reporting. (1) The chemical substance identified as tin, C16-18 and C18-unsatd. fatty acids castor...

  20. 40 CFR 721.10297 - Tin, C16-18 and C18-unsatd. fatty acids castor-oil fatty acids complexes.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Tin, C16-18 and C18-unsatd. fatty... SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10297 Tin, C16-18 and C18-unsatd... to reporting. (1) The chemical substance identified as tin, C16-18 and C18-unsatd. fatty acids castor...

  1. Low resistivity contact to iron-pnictide superconductors

    DOEpatents

    Tanatar, Makariy; Prozorov, Ruslan; Ni, Ni; Bud& #x27; ko, Sergey; Canfield, Paul

    2013-05-28

    Method of making a low resistivity electrical connection between an electrical conductor and an iron pnictide superconductor involves connecting the electrical conductor and superconductor using a tin or tin-based material therebetween, such as using a tin or tin-based solder. The superconductor can be based on doped AFe.sub.2As.sub.2, where A can be Ca, Sr, Ba, Eu or combinations thereof for purposes of illustration only.

  2. Uptake and Fate of Tri-N-Butyltin Cation in Estuarine Bacteria,

    DTIC Science & Technology

    1982-04-02

    as well as Yamada and co-workers [31] found trialkyltins, especially tripropyl- tin (TPT) and tributyltin ( TBT ), had the highest antiw-,’.?ial...tin-resistant estuarine bacteria was studied. The bacterial isolates accumulated tributyltin to 3.7 to 7.7 mg tin per g dry weight of cells by a non...chromatography-atomic absorption spectrophotometry and tin-selective purge and trap flame photometric gas chromatography for possible tributyltin

  3. Influence of implantation on the electrochemical properties of smooth and porous TiN coatings for stimulation electrodes

    NASA Astrophysics Data System (ADS)

    Meijs, S.; Sørensen, C.; Sørensen, S.; Rechendorff, K.; Fjorback, M.; Rijkhoff, N. J. M.

    2016-04-01

    Objective. To determine whether changes in electrochemical properties of porous titanium nitride (TiN) electrodes as a function of time after implantation are different from those of smooth TiN electrodes. Approach. Eight smooth and 8 porous TiN coated electrodes were implanted in 8 rats. Before implantation, voltage transients, cyclic voltammograms and impedance spectra were recorded in phosphate buffered saline (PBS). After implantation, these measurements were done weekly to investigate how smooth and porous electrodes were affected by implantation. Main results. The electrode capacitance of the porous TiN electrodes decreased more than the capacitance of the smooth electrodes due to acute implantation under fast measurement conditions (such as stimulation pulses). This indicates that protein adhesion presents a greater diffusion limitation for counter-ions for the porous than for the smooth electrodes. The changes in electrochemical properties during the implanted period were similar for smooth and porous TiN electrodes, indicating that cell adhesion poses a similar diffusion limitation for smooth and porous electrodes. Significance. This knowledge can be used to optimize the porous structure of the TiN film, so that the effect of protein adhesion on the electrochemical properties is diminished. Alternatively, an additional coating could be applied on the porous TiN that would prevent or minimize protein adhesion.

  4. Silver-tin alloys and amalgams: electrochemical considerations.

    PubMed

    Mueller, H J

    1980-01-01

    The corrosion potential and anodic polarization profiles of a representative number of silver-tin alloys and their corresponding amalgams in a physiological solution were determined and compared to their microstructures. For the alloys with tin-content greater than 27%(wt) and for all amalgams, the corrosion process is related to the attack of free tin for the alloys and to the gamma-2 tin for the amalgams. The gamma-2 concentration in the amalgams increases with an increase in tin-content. For alloys with tin-content less than 27%, the corrosion process is even more restricted than for the process observed with pure silver. From a developed theory based upon the potential-time and polarization results, association of the O2 reduction process on a SnO cathodic film to an intermediate specie of H2O2 is made. The rate of H2O2 decomposition on a SnO surface in a four electron process is thought to control the O2 reduction overvoltage. The O2 reduction overvoltage decreases with increases in the silver-content of the amalgam, particularily seen with the 8 and 12% tin compositions. Due to the polarization induced corrosion process, a phase with high silver and high mercury concentrations was observed over the unreacted particles.

  5. Role of point defects and HfO2/TiN interface stoichiometry on effective work function modulation in ultra-scaled complementary metal-oxide-semiconductor devices

    NASA Astrophysics Data System (ADS)

    Pandey, R. K.; Sathiyanarayanan, Rajesh; Kwon, Unoh; Narayanan, Vijay; Murali, K. V. R. M.

    2013-07-01

    We investigate the physical properties of a portion of the gate stack of an ultra-scaled complementary metal-oxide-semiconductor (CMOS) device. The effects of point defects, such as oxygen vacancy, oxygen, and aluminum interstitials at the HfO2/TiN interface, on the effective work function of TiN are explored using density functional theory. We compute the diffusion barriers of such point defects in the bulk TiN and across the HfO2/TiN interface. Diffusion of these point defects across the HfO2/TiN interface occurs during the device integration process. This results in variation of the effective work function and hence in the threshold voltage variation in the devices. Further, we simulate the effects of varying the HfO2/TiN interface stoichiometry on the effective work function modulation in these extremely-scaled CMOS devices. Our results show that the interface rich in nitrogen gives higher effective work function, whereas the interface rich in titanium gives lower effective work function, compared to a stoichiometric HfO2/TiN interface. This theoretical prediction is confirmed by the experiment, demonstrating over 700 meV modulation in the effective work function.

  6. Tin-silver-bismuth solders for electronics assembly

    DOEpatents

    Vianco, Paul T.; Rejent, Jerome A.

    1995-01-01

    A lead-free solder alloy for electronic assemblies composed of a eutectic alloy of tin and silver with a bismuth addition, x, of 0

  7. Tin-silver-bismuth solders for electronics assembly

    DOEpatents

    Vianco, P.T.; Rejent, J.A.

    1995-08-08

    A lead-free solder alloy is disclosed for electronic assemblies composed of a eutectic alloy of tin and silver with a bismuth addition, x, of 0

  8. The oxidation of carbon monoxide using tin oxide based catalysts

    NASA Technical Reports Server (NTRS)

    Sampson, Christopher F.; Jorgensen, Norman

    1990-01-01

    The preparation conditions for precious metal/tin oxide catalysts were optimized for maximum carbon monoxide/oxygen recombination efficiency. This was achieved by controlling the tin digestion, the peptization to form the sol, the calcination process and the method of adding the precious metals. Extensive studies of the tin oxide structure were carried out over the temperature range 20 to 500 C in air or hydrogen environments using Raman scattering and X ray diffraction. Adsorbed species on tin oxide, generated in an environment containing carbon monoxide, gave rise to a Raman band at about 1600 cm(exp -1) which was assigned to carbonaceous groups, possible carbonate.

  9. Tribological characterization of TiN coatings prepared by magnetron sputtering

    NASA Astrophysics Data System (ADS)

    Makwana, Nishant S.; Chauhan, Kamlesh V.; Sonera, Akshay L.; Chauhan, Dharmesh B.; Dave, Divyeshkumar P.; Rawal, Sushant K.

    2018-05-01

    Titanium nitride (TiN) coating deposited on aluminium and brass pin substrates using RF reactive magnetron sputtering. The structural properties and surface morphology were characterized by X-ray diffraction (XRD), atomic force microscope (AFM) and field emission scanning electron microscope (FE-SEM). There was formation of (101) Ti2N, (110) TiN2 and (102) TiN0.30 peaks at 3.5Pa, 2Pa and 1.25Pa sputtering pressure respectively. The tribological properties of coating were inspected using pin on disc tribometer equipment. It was observed that TiN coated aluminium and brass pins demonstrated improved wear resistance than uncoated aluminium and brass pins.

  10. Bonding in Some Zintl Phases: A Study by Tin-119 Mössbauer Spectroscopy

    NASA Astrophysics Data System (ADS)

    Asbrand, M.; Berry, F. J.; Eisenmann, B.; Kniep, R.; Smart, L. E.; Thied, R. C.

    1995-09-01

    The 119Sn Mössbauer parameters for a range of Zintl phase compounds are reported. The compounds containing tetrahedrally coordinated tin of composition M5SnX3 (M = Na, K; X = P, As, Sb) have chemical isomer shifts close to that of grey-tin and can be considered to be covalently bonded species. The layer structures of composition KSnX (X = As, Sb) and double-layer compounds M Sn2X2 (M = Na, Sr; X = As, Sb) have tin in a distorted octahedral environment. The chemical isomer shifts are closer to that of white-tin and can be interpreted in terms of metallic bonding.

  11. 99M-Technetium labeled tin colloid radiopharmaceuticals

    DOEpatents

    Winchell, Harry S.; Barak, Morton; Van Fleet, III, Parmer

    1976-07-06

    An improved 99m-technetium labeled tin(II) colloid, size-stabilized for reticuloendothelial organ imaging without the use of macromolecular stabilizers and a packaged tin base reagent and an improved method for making it are disclosed.

  12. Determination of total tin in geological materials by electrothermal atomic-absorption spectrophotometry using a tungsten-impregnated graphite furnace

    USGS Publications Warehouse

    Zhou, L.; Chao, T.T.; Meier, A.L.

    1984-01-01

    An electrothermal atomic-absorption spectrophotometric method is described for the determination of total tin in geological materials, with use of a tungsten-impregnated graphite furnace. The sample is decomposed by fusion with lithium metaborate and the melt is dissolved in 10% hydrochloric acid. Tin is then extracted into trioctylphosphine oxide-methyl isobutyl ketone prior to atomization. Impregnation of the furnace with a sodium tungstate solution increases the sensitivity of the determination and improves the precision of the results. The limits of determination are 0.5-20 ppm of tin in the sample. Higher tin values can be determined by dilution of the extract. Replicate analyses of eighteen geological reference samples with diverse matrices gave relative standard deviations ranging from 2.0 to 10.8% with an average of 4.6%. Average tin values for reference samples were in general agreement with, but more precise than, those reported by others. Apparent recoveries of tin added to various samples ranged from 95 to 111% with an average of 102%. ?? 1984.

  13. Morphology and Gas-Sensing Properties of Tin Oxide Foams with Dual Pore Structure

    NASA Astrophysics Data System (ADS)

    Nam, Kyungju; Kim, Hyeong-Gwan; Choi, Hyelim; Park, Hyeji; Kang, Jin Soo; Sung, Yung-Eun; Lee, Hee Chul; Choe, Heeman

    2017-06-01

    Tin oxide is a commonly used gas-sensing material, which can be applied as an n- or p-type gas sensor. To improve the gas-sensing performance of tin oxide, we successfully synthesized tin oxide foam via an ice-templating or freeze-casting method. The tin oxide foam samples showed different morphological features depending on the major processing parameters, which include sintering temperature, sintering time, and the amount of added powder. Based on scanning electron microscopy images, we could identify dual pore structure of tin oxide foam containing `wall' pores ranging from 5.3 μm to 10.7 μm, as well as smaller secondary pores (a few micrometers in size) on the wall surfaces. Gas-sensing performance tests for the synthesized tin oxide foams reveal a sensitivity of 13.1, a response time of 192 s, and a recovery time of 160 s at an ethanol gas concentration of 60 ppm at 300°C. This is a remarkable result given that it showed p-type semiconductor behavior and was used without the addition of any catalyst.

  14. The application and research status of tin whisker formation in electric usage

    NASA Astrophysics Data System (ADS)

    Zhao, Heng; Liu, Qing-bin; Lan, Yuan-pei; Wang, Hua; Yao, Da-wei

    2017-05-01

    `Hair Like' crystalline structure grows from most pure tin or zinc finishes. Usually, the diameter of tin whisker is up to 10 mm and the length of tin whisker is typically 1 µm. In detail, the questions for tin whisker formation are classified into 6 categories: 1. Residual stress with in the tin plating; 2. Intermetallic Formation; 3. Externally Applied Compressive Stress; 4. Bending and Stretching; 5. Scratches and Nicks; 6. Coefficient of Thermal Expansion Mismatches. The result shows that, whisker formation could causes electrical short circuit (High current of whisker melting), debris contamination (Sensitive Optical and Micro Electrical Mechanical System) and metal vapor (Vaporize Damage). Thus, it is suggested that environmental tests and standards (Whisker Shape, Temperature, Pressure, Moisture, Thermal Cycling, and Electrical Field) are required for suppressing whisker formation. Nowadays, the new standards committee of Europe Union acts RoHS (Restriction of certain Hazardous Substances) and WEEE (Waste Electrical and Electronic Equipment) to restrict Pb usage. Thus, new compounds adding to alloys to suppress whiskers are required in electronic application area. In summary, the tin whisker formation is largely influenced by compositions and precipitations.

  15. UV-visible spectroscopic estimation of photodegradation of rhodamine-B dye using tin(IV) oxide nanoparticles.

    PubMed

    Sangami, G; Dharmaraj, N

    2012-11-01

    Nanocrystalline, tin(IV) oxide (SnO(2)) particles has been prepared by thermal decomposition of tin oxalate precursor obtained from the reactions of tin(IV) chloride and sodium oxalate using eggshell membrane (ESM). The as-prepared SnO(2) nanoparticles were characterized by thermal studies, transmission electron microscopy (TEM), powder X-ray diffraction (XRD), Raman, FT-IR and UV-visible studies and used as a photocatalyst for the degradation of rhodamine-B (Rh-B) dye. The size of the prepared nanoparticles was in the range of 5-12nm as identified from the TEM images. Powder XRD data revealed the presence of a tetragonal, rutile crystalline phase of the tin(IV) oxide nanoparticles. Thermal analysis showed that the decomposition of tin oxalate precursor to yield the titled tin(IV) oxide nanoparticles was completed below 500°C. The extent of degradation of Rh-B in the presence of SnO(2) monitored by absorption spectral measurements demonstrated that 94.48% of the selected dye was degraded upon irradiation with UV light for 60 min. Copyright © 2012 Elsevier B.V. All rights reserved.

  16. Inductively coupled plasma atomic emission spectrometric determination of tin in canned food.

    PubMed

    Sumitani, H; Suekane, S; Nakatani, A; Tatsuka, K

    1993-01-01

    Various canned foods were digested sequentially with HNO3 and HCl, diluted to 100 mL, and filtered, and then tin was determined by inductively coupled plasma atomic emission spectrometry (ICP/AES). Samples of canned Satsuma mandarin, peach, apricot, pineapple, apple juice, mushroom, asparagus, evaporated milk, short-necked clam, spinach, whole tomato, meat, and salmon were evaluated. Sample preparations did not require time-consuming dilutions, because ICP/AES has wide dynamic range. The standard addition method was used to determine tin concentration. Accuracy of the method was tested by analyzing analytical standards containing tin at 2 levels (50 and 250 micrograms/g). The amounts of tin found for the 50 and 250 micrograms/g levels were 50.5 and 256 micrograms/g, respectively, and the repeatability coefficients of variation were 4.0 and 3.8%, respectively. Recovery of tin from 13 canned foods spiked at 2 levels (50 and 250 micrograms/g) ranged from 93.9 to 109.4%, with a mean of 99.2%. The quantitation limit for tin standard solution was about 0.5 microgram/g.

  17. Study on the removal of iron impurities in methanesulfonic acid tin plating bath

    NASA Astrophysics Data System (ADS)

    Hou-li, LIU; Jian-Jun, CHEN; Hong-Liang, PAN

    2018-03-01

    This thesis investigated the the influence of sodium sulfite as reducing agent on the recovery rate of tin ion. The approach is that HZ016 type cation exchange resin was used to adsorb Sn2+ and Fe2+ in electroplated tin solution first. After adsorption, the resin was removed by sulfuric acid, which was added with NaOH to adjust pH value to form precipitation and separate tin. X-ray diffraction (XRD) and energy spectrum (EDS) method were used to analyze the composition of the precipitates adjusted by pH. The results show that when the mass ratio of resin to bath is 1:2, the adsorption efficiency of resin reaches 98.3% and 97.1% respectively, and the elution efficiency of tin and iron reaches 95.1% and 94% respectively when the mass ratio of resin to eluent sulfuric acid is 1:4. Sodium sulfite was added to increase the efficiency of tin recovery by 8.1%. EDS and XRD atlas showed that after pH regulation, the main composition of the filtration precipitation was the hydroxides of tin.

  18. Effects of vanadium ion implantation on microstructure, mechanical and tribological properties of TiN coatings

    NASA Astrophysics Data System (ADS)

    Deng, Bin; Tao, Ye; Guo, Deliang

    2012-09-01

    TiN coatings were deposited on the substrates of cemented carbide (WC-TiC-Co) by Magnetic Filter Arc Ion Plating (MFAIP) and then implanted with vanadium through Metal Vacuum Vapor Arc (MEVVA) ion source with the doses of 1 × 1017 and 5 × 1017 ions/cm2 at 40 kV. The microstructures and chemical compositions of the V-implanted TiN coatings were investigated using Glancing Incidence X-ray Diffraction (GIXRD) and X-ray Photoelectron Spectroscopy (XPS), together with the mechanical and tribological properties of coatings were characterized using nano-indentation and ball-on-disk tribometer. It was found that the diffraction peaks of the V-implanted TiN coatings at the doses of 5 × 1017 ions/cm2 shifted to higher angles and became broader. The hardness and elastic modulus of TiN coatings increased after V ion implantation. The wear mechanism for both un-implanted and V-implanted TiN coatings against GCr15 steel ball was adhesive wear, and the V-implanted TiN coatings had a lower friction coefficient as well as a better wear resistance

  19. Tinless Solder Investigation

    DTIC Science & Technology

    1937-06-24

    tin solder. 4. By soldering coated thin (.015*) plates of tin- plate, terne-plate and galvanised iron with this mixture, the tensile strength in...9700 lbs/ln2 Average 9500 lbs/ln2 •The plates used In this test were tin-plate. Tests on bright annealed, terne-plate, brass and galvanised ...plates (tin-plate, terne- plate and galvanised iron) had coatings, it was impossible to use emery oloth OB them to completely remove the rust or

  20. Synthesis and surface chemistry of high quality wurtzite and kesterite Cu2ZnSnS4 nanocrystals using tin(II) 2-ethylhexanoate as a new tin source.

    PubMed

    Gabka, Grzegorz; Bujak, Piotr; Gryszel, Maciej; Ostrowski, Andrzej; Malinowska, Karolina; Zukowska, Grazyna Z; Agnese, Fabio; Pron, Adam; Reiss, Peter

    2015-08-21

    A novel synthesis method for the preparation of Cu2ZnSnS4 nanocrystals is presented using a liquid precursor of tin, namely tin(II) 2-ethylhexanoate, which yields small and nearly monodisperse NCs either in the kesterite or in the wurtzite phase depending on the sulfur source (elemental sulfur in oleylamine vs. dodecanethiol).

  1. Synthesis of antimony-doped tin oxide (ATO) nanoparticles by the nitrate-citrate combustion method

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhang Jianrong; Gao Lian

    2004-12-02

    Antimony-doped tin oxide (ATO) nanoparticles having rutile structure have been synthesized by the combustion method using citric acid (CA) as fuel and nitrate as an oxidant, the metal sources were granulated tin and Sb{sub 2}O{sub 3}. The influence of citric acid (fuel) to metal ratio on the average crystallite size, specific surface area and morphology of the nanoparticles has been investigated. X-ray diffraction showed the tin ions were reduced to elemental tin during combustion reaction. The average ATO crystallite size increased with the increase of citric acid (fuel). Powder morphology and the comparison of crystallite size and grain size showsmore » that the degree of agglomeration of the powder decreased with an increase of the ratio. The highest specific surface area was 37.5 m{sup 2}/g when the citric acid to tin ratio was about 6.« less

  2. Assessment of organotin and tin-free antifouling paints contamination in the Korean coastal area.

    PubMed

    Lee, Mi-Ri-Nae; Kim, Un-Jung; Lee, In-Seok; Choi, Minkyu; Oh, Jeong-Eun

    2015-10-15

    Twelve organotins (methyl-, octyl-, butyl-, and phenyl-tin), and eight tin-free antifouling paints and their degradation products were measured in marine sediments from the Korean coastal area, and Busan and Ulsan bays, the largest harbor area in Korea. The total concentration of tin-free antifouling paints was two- to threefold higher than the total concentration of organotins. Principal component analysis was used to identify sites with relatively high levels of contamination in the inner bay area of Busan and Ulsan bays, which were separated from the coastal area. In Busan and Ulsan bays, chlorothalonil and DMSA were more dominant than in the coastal area. However, Sea-Nine 211 and total diurons, including their degradation products, were generally dominant in the Korean coastal area. The concentrations of tin and tin-free compounds were significantly different between the east and west coasts. Copyright © 2015 Elsevier Ltd. All rights reserved.

  3. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Schulberg, M.T.; Allendorf, M.D.; Outka, D.A.

    NH{sub 3} is an important component of many chemical vapor deposition (CVD) processes for TiN films, which are used for diffusion barriers and other applications in microelectronic circuits. In this study, the interaction of NH{sub 3} with TiN surfaces is examined with temperature programmed desorption (TPD) and Auger electron spectroscopy. NH{sub 3} has two adsorption states on TiN: a chemisorbed state and a multilayer state. A new method for analyzing TPD spectra in systems with slow pumping speeds yields activation energies for desorption for the two states of 24 kcal/mol and 7.3 kcal/mol, respectively. The sticking probability into the chemisorptionmore » state is {approximately}0.06. These results are discussed in the context of TiN CVD. In addition, the high temperature stability of TiN is investigated. TiN decomposes to its elements only after heating to 1300 K, showing that decomposition is unlikely to occur under CVD conditions.« less

  4. The prognostic values of tumor-infiltrating neutrophils, lymphocytes and neutrophil/lymphocyte rates in bladder urothelial cancer.

    PubMed

    Liu, Kangkang; Zhao, Kun; Wang, Lining; Sun, Erlin

    2018-05-20

    Tumor-infiltrating neutrophils (TINs) and lymphocytes (TILs) are found to play essential roles in many tumors and associate with the prognosis of patients. But, the prognostic values of TINs, TILs and NLR (neutrophils-lymphocytes ratio) in bladder cancer (BC) are still undefined. The object of our study was to systematically interrogate the associations of these immune cells with clinical outcomes of BC patients. In our study, a total of 102 patients pathologically diagnosed with BC were included. CD66b + and CD8 + antibodies were used to mark neutrophils and CD8 + lymphocytes by immunohistochemistry. The results found that TINs and NLR were significantly associated with pathological T-stages of tumors (P < 0.01), but TILs were not. And TINs were also related to pathological tumor grades (P = 0.012). Regarding the prognostic values, TINs was related to the high risk of recurrence in non-muscle invasive BC (NMIBC) patients. Elevated TINs and NLR were associated with poor overall survivals of BC patients, whereas higher TILs were related to longer survivals (P < 0.01). Multivariate analysis showed that both of TINs (HR 2.427, 1.024-5.752, P = 0.044) and NLR (HR 3.529, 1.147-10.864, P = 0.028) were independent unfavorable prognosis markers. In conclusion, Tumor infiltrating immune cells, including TINs, TILs and NLR were important markers in predicting the prognosis of bladder cancer patients. TINs and NLR were more likely to be negative predictors, but TILs were favorable in patients with BC. Copyright © 2018 Elsevier GmbH. All rights reserved.

  5. Evaluation of employee exposure to organic tin compounds used as stabilizers at PVC processing facilities.

    PubMed

    Boraiko, Carol; Batt, John

    2005-02-01

    Organic tin compounds are primary substances used as heat stabilizers by the polyvinyl chloride (PVC) industry. The use of these compounds in the PVC industry is generally well controlled, usually by automated processes. This study was conducted to provide an overview of worker exposure to organic tin compounds at PVC processing facilities and to verify that these exposures are below the threshold limit value (TLV((R))) set by the American Conference of Governmental Industrial Hygienists for organic tin. The basis of the TLV indicates the principal concern is to minimize adverse effects on immune function and the central nervous system from airborne exposure to organic tin. The TLV has a skin designation based on the potential for percutaneous absorption; the TLVs for inhalation exposures are based on the presumption that there is no concurrent exposure via the skin and oral ingestion routes. Personal exposure monitoring was conducted following the National Institute for Occupational Safety and Health (NIOSH) 5504 sampling method and a modified version of the NIOSH analytical method. The results were reported as"total tin."The data indicated no average exposure levels for individual tasks exceeded the organic tin TLV, and 96%of results the samples were less than 20%of the TLV. Only 1 sample of 102 exceeded the TLV, and the individual was wearing appropriate respiratory protection. Subsequent investigation indicated the highest exposures occurred while the operators were conducting tasks that included manual handling of the organic tin compounds. These data suggest manual operations may have a greater potential for organic tin exposure.

  6. 77 FR 27438 - Certain Corrosion-Resistant Carbon Steel Flat Products From Korea: Final Results of Expedited...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-10

    ...- rolled steel products either plated or coated with tin, lead, chromium, chromium oxides, both tin and lead (``terne plate''), or both chromium and chromium oxides (``tin-free steel''), whether or not...

  7. Effect of Composition of Alloys of Tin-Sodium Systems on Surface Tension

    NASA Astrophysics Data System (ADS)

    Alchagirov, B. B.; Kyasova, O. Kh.

    2018-07-01

    The results are presented from investigating the surface tensions of tin-sodium systems, along with original experimental data on the concentration dependences of the surface tensions of 19 tin-based sodium alloys obtained for samples of enhanced purity in a range of compositions with contents of 0.06 to 5.00 at % Na at T = 573 K. It is established that adding small amounts of sodium to tin greatly reduces the surface tensions of the studied melts. Calculations of sodium adsorption in alloys with tin show there is a maximum on the adsorption curve that corresponds to alloys with contents of around 1.5 at % Na in Sn.

  8. Effect of pretreatment on a platinized tin oxide catalyst used for low-temperature CO-oxidation

    NASA Technical Reports Server (NTRS)

    Drawdy, Jean E.; Hoflund, Gar B.; Gardner, Steven D.; Yngvadottir, Eva; Schryer, David R.

    1990-01-01

    A commercial platinized tin oxide catalyst used for low-temperature CO oxidation has been characterized using ion scattering spectroscopy (ISS), Auger electron spectroscopy (AES) and Electron Spectroscopy for Chemical Analysis (ESCA) before and after reduction in 40 Torr of CO for 1 hour at various temperatures from 75 to 175 C. The reduction results in loss of surface oxygen, formation of metallic tin, conversion of platinum oxides to Pt-O-Sn and Pt(OH)2 and a small amount of metallic Pt which alloys with the tin. These results should be useful in understanding how the pretreatment temperature affects the catalytic activity of platinized tin oxide toward CO oxidation.

  9. Melting of isolated tin nanoparticles

    PubMed

    Bachels; Guntherodt; Schafer

    2000-08-07

    The melting of isolated neutral tin cluster distributions with mean sizes of about 500 atoms has been investigated in a molecular beam experiment by calorimetrically measuring the clusters' formation energies as a function of their internal temperature. For this purpose the possibility to adjust the temperature of the clusters' internal degrees of freedom by means of the temperature of the cluster source's nozzle was exploited. The melting point of the investigated tin clusters was found to be lowered by 125 K and the latent heat of fusion per atom is reduced by 35% compared to bulk tin. The melting behavior of the isolated tin clusters is discussed with respect to the occurrence of surface premelting.

  10. Prognostic value of intratumoral neutrophils in advanced gastric carcinoma in a high-risk area in northern Italy.

    PubMed

    Caruso, Rosario Alberto; Bellocco, Rino; Pagano, Marcello; Bertoli, Giovanni; Rigoli, Luciana; Inferrera, Cosimo

    2002-08-01

    Several lines of evidence indicate that neutrophils act nonspecifically against tumor cells. The correlation between tumor-infiltrating neutrophils (TINs) and clinicopathological features remains unclear and deserves to be investigated. To analyze the prognostic influence of TINs in gastric carcinoma, the authors selected 273 patients with advanced gastric carcinoma who underwent gastrectomy at Cremona Hospital (Lombardia, Italy) between 1990 and 1995 and followed them for a period of 5 years. The number of TINs was assessed in a semiquantitative manner using the mean value of 20 nonoverlapping high-power fields (magnification, 400x; 0.08 mm(2)). The patients were divided into two groups: patients with a moderate or extensive amount of TINs (n = 76; >10 TINs per 20 high-power fields) and patients with a minor amount of TINs (n = 197;

  11. A tillering inhibition gene influences root–shoot carbon partitioning and pattern of water use to improve wheat productivity in rainfed environments

    PubMed Central

    Hendriks, P.W.; Kirkegaard, J.A.; Lilley, J.M.; Gregory, P.J.; Rebetzke, G.J.

    2016-01-01

    Genetic modification of shoot and root morphology has potential to improve water and nutrient uptake of wheat crops in rainfed environments. Near-isogenic lines (NILs) varying for a tillering inhibition (tin) gene and representing multiple genetic backgrounds were phenotyped in contrasting, controlled environments for shoot and root growth. Leaf area, shoot and root biomass were similar until tillering, whereupon reduced tillering in tin-containing NILs produced reductions of up to 60% in total leaf area and biomass, and increases in total root length of up to 120% and root biomass to 145%. Together, the root-to-shoot ratio increased two-fold with the tin gene. The influence of tin on shoot and root growth was greatest in the cv. Banks genetic background, particularly in the biculm-selected NIL, and was typically strongest in cooler environments. A separate de-tillering study confirmed greater root-to-shoot ratios with regular tiller removal in non-tin-containing genotypes. In validating these observations in a rainfed field study, the tin allele had a negligible effect on seedling growth but was associated with significantly (P<0.05) reduced tiller number (–37%), leaf area index (–26%), and spike number (–35%) to reduce plant biomass (–19%) at anthesis. Root biomass, root-to-shoot ratio at early stem elongation, and root depth at maturity were all increased in tin-containing NILs. Soil water use was slowed in tin-containing NILs, resulting in greater water availability, greater stomatal conductance, cooler canopy temperatures, and maintenance of green leaf area during grain-filling. Together these effects contributed to increases in harvest index and grain yield. In both the controlled and field environments, the tin gene was commonly associated with increased root length and biomass, but the significant influence of genetic background and environment suggests careful assessment of tin-containing progeny in selection for genotypic increases in root growth. PMID:26494729

  12. Structure, electronic properties, and oxygen incorporation/diffusion characteristics of the Σ 5 TiN(310)[001] tilt grain boundary

    NASA Astrophysics Data System (ADS)

    McKenna, Keith P.

    2018-02-01

    First principles calculations are employed to investigate the structure, electronic properties, and oxygen incorporation/diffusion characteristics of the Σ 5 TiN(310) tilt grain boundary with relevance to applications of polycrystalline TiN in microelectronics and protective coatings. We show that the grain boundary does not significantly modify electronic states near the Fermi energy but does induce an upward shift of up to 0.6 eV in a number of deeper occupied bands. We also show that oxygen is preferentially incorporated into the TiN grain boundary (GB) but must overcome relatively high activation energies for further diffusion. These predictions are consistent with the "stuffed barrier model" proposed to explain the good barrier characteristics of TiN. We also show that while the oxidizing power of TiN GBs is not sufficient to reduce HfO2 (a prototypical gate dielectric material), they can act as a scavenger for interstitial oxygen. Altogether, these results provide the much needed atomistic insights into the properties of a model GB in TiN and suggest a number of directions for future investigation.

  13. High-performance Li-ion Sn anodes with enhanced electrochemical properties using highly conductive TiN nanotubes array as a 3D multifunctional support

    NASA Astrophysics Data System (ADS)

    Pu, Jun; Du, Hongxiu; Wang, Jian; Wu, Wenlu; Shen, Zihan; Liu, Jinyun; Zhang, Huigang

    2017-08-01

    High capacity electrodes are demanded to increase the energy and power density of lithium ion batteries. However, the cycling and rate properties are severely affected by the large volume changes caused by the lithium insertion and extraction. Structured electrodes with mechanically stable scaffolds are widely developed to mitigate the adverse effects of volume changes. Tin, as a promising anode material, receives great attentions because of its high theoretic capacity. There is a critical value of tin particle size above which tin anodes readily crack, leading to low cyclability. The electrode design using mechanical scaffolds must retain tin particles below the critical size and concurrently enable high volumetric capacity. It is a challenge to guarantee the critical size for high cyclability and space utilization for high volumetric capacity. This study provides a highly conductive TiN nanotubes array with submicron diameters, which enable thin tin coating without sacrificing the volumetric capacity. Such a structured electrode delivers a capacity of 795 mAh gSn-1 (Sn basis) and 1812 mAh cmel-3 (electrode basis). The long-term cycling shows only 0.04% capacity decay per cycle.

  14. Nanoengineering of 2D tin sulfide nanoflake arrays incorporated on polyaniline nanofibers with boosted capacitive behavior

    NASA Astrophysics Data System (ADS)

    Wang, Huanhuan; Chao, DongLiang; Liu, Jilei; Lin, Jianyi; Shen, Ze Xiang

    2018-07-01

    Nanoscale engineering plays an important role in designing novel electrode architecture and boosting energy storage in supercapacitors. Herein, we demonstrate the fabrication of freestanding tin sulfide based supercapacitor electrode using facile nucleation substrate control, i.e. polyaniline network. This is the first time that tin sulfide based material is fabricated as a binder-free electrode for supercapacitors. The first combination of tin sulfide and polyaniline also evokes synergistic effect to enhance the performance as the polyaniline nanofibers facilitate the growth of tin sulfide flakes in nanosize which is further proved helpful for improving the capacity and stability of the electrode. The as-obtained electrode of tin sulfide nanoflake arrays incorporated on polyaniline nanofibers (365 F g‑1 at 10 mV s‑1) exhibits superior electrochemical performance compared with micro-scaled tin sulfide (32 F g‑1 at 10 mV s‑1). The significantly improved pseudocapacitive and diffusive contributions of polyaniline nanofibers incorporated electrode are identified by quantitative kinetics analysis due to greatly decreased particle size and introduced mesopores, nanoclusters, and exposed edges. Profited from effective nanostructure engineering, a Na+ intercalation mechanism is also pointed out in boosting the electrochemical performance.

  15. Fabrication of Highly Ordered and Well-Aligned PbTiO 3/TiN Core–Shell Nanotube Arrays

    DOE PAGES

    Yoon, Jaesung; Kim, Sangjoon; Kim, Dongjin; ...

    2015-04-30

    Highly ordered and well-aligned PbTiO 3/TiN core–shell nanotubes are fabricated in this paper via an anodic aluminum oxide templating route followed by TiN and TiO 2 atomic layer deposition deposition and a subsequent PbO vapor reaction. Finally, PbTiO 3/TiN nanotubes keep their original shape after the vapor phase reaction, and they display well-defined piezoresponse hysteresis curves with remnant piezoresponse of 38 pm V -1.

  16. Synthesis of Tetraphenylstannacyclopentadienes (Stannoles). II. Derivatives and Adducts of 1,1-Dihalo-2,3,4,5-tetraphenylstannoles.

    DTIC Science & Technology

    1981-04-15

    products (4-bromo-l,2,3,4-tetraphenylbutadienyl)tin tribromide o (4-iodo-l,2,3,4-tetraphenylbutadienyl)tin triiodide. Even gentle chlorination of...hexaphenyistannole by elemental chlorine cleaves the ring tin-carbon bonds to form cis-cis-l ,4-dichloro-l ,2 ,3 ,4-tetraphenylbutadiene-l, 3 and diphenyltin... chlorination of hexaphenylstannole by elemental chlorine cleaves the ring tin-carbon bonds to form cis- cis-l,4-dichloro-l,2,3,4-tetraphenylbutadiene-1,3

  17. Solderability of pre-tinned Cu sheet

    NASA Astrophysics Data System (ADS)

    Sunwoo, A. J.; Morris, J. W.; Lucey, G. K.

    1992-05-01

    The reliability and integrity of pre-tinned copper-clad printed circuit (PC) boards are serious concerns in the manufacture of electronic devices. The factors that influence the wetting during soldering of Cu are discussed. The results suggest that pre-tinning with a Pb-rich solder, such as 95Pb-5Sn, is preferred to pre-tinning with eutectic solder, since the latter can develop exposed intermetallics during aging that wet poorly. The results also confirm that the use of flux leads to carbon contamination in the solder.

  18. Effect of Nitrogen Content on Physical and Chemical Properties of TiN Thin Films Prepared by DC Magnetron Sputtering with Supported Discharge

    NASA Astrophysics Data System (ADS)

    Kavitha, A.; Kannan, R.; Gunasekhar, K. R.; Rajashabala, S.

    2017-10-01

    Amorphous titanium nitride (TiN) thin films have been prepared on silicon (Si) and glass substrates by direct-current (DC) reactive magnetron sputtering with a supported discharge (triode). Nitrogen gas (N2) at partial pressure of 0.3 Pa, 0.4 Pa, 0.5 Pa, and 0.6 Pa was used to prepare the TiN thin films, maintaining total pressure of argon and N2 of about 0.7 Pa. The chemical, microstructural, optical, and electrical properties of the TiN thin films were systematically studied. Presence of different phases of Ti with nitrogen (N), oxygen (O2), and carbon (C) elements was revealed by x-ray photoelectron spectroscopy characterization. Increase in the nitrogen pressure from 0.3 Pa to 0.6 Pa reduced the optical bandgap of the TiN thin film from 2.9 eV to 2.7 eV. Photoluminescence study showed that TiN thin film deposited at N2 partial pressure of 0.3 Pa exhibited three shoulder peaks at 330 nm, 335 nm, and 340 nm, which disappeared when the sample was deposited with N2 partial pressure of 0.6 Pa. Increase in the nitrogen content decreased the electrical resistivity of the TiN thin film from 3200 μΩ cm to 1800 μΩ cm. Atomic force microscopy studies of the TiN thin films deposited with N2 partial pressure of 0.6 Pa showed a uniform surface pattern associated with accumulation of fine grains. The results and advantages of this method of preparing TiN thin films are also reported.

  19. Tumor-infiltrating Neutrophils is Prognostic and Predictive for Postoperative Adjuvant Chemotherapy Benefit in Patients With Gastric Cancer.

    PubMed

    Zhang, Heng; Liu, Hao; Shen, Zhenbin; Lin, Chao; Wang, Xuefei; Qin, Jing; Qin, Xinyu; Xu, Jiejie; Sun, Yihong

    2018-02-01

    This study was aimed to investigate the prognostic value of tumor-infiltrating neutrophils (TINs) and to generate a predictive model to refine postoperative risk stratification system for patients with gastric cancer. TIN presents in various malignant tumors, but its clinical significance in gastric cancer remains obscure. The study enrolled 3 independent sets of patients with gastric cancer from 2 institutional medical centers of China. TIN was estimated by immunohistochemical staining of CD66b, and its relationship with clinicopathological features and clinical outcomes were evaluated. Prognostic accuracies were evaluated by C-index and Akaike information criterion. TINs in gastric cancer tissues ranged from 0 to 192 cells/high magnification filed (HPF), 0 to 117 cells/HPF, and 0 to 142 cells/HPF in the training, testing, and validation sets, respectively. TINs were negatively correlated with lymph node classification (P = 0.007, P = 0.041, and P = 0.032, respectively) and tumor stage (P = 0.019, P = 0.013, and P = 0.025, respectively) in the 3 sets. Moreover, multivariate analysis identified TINs and tumor node metastasis (TNM) stage as 2 independent prognostic factors for overall survival. Incorporation of TINs into well-established TNM system generated a predictive model that shows better predictive accuracy for overall survival. More importantly, patients with higher TINs were prone to overall survival benefit from postoperative adjuvant chemotherapy. These results were validated in the independent testing and validation sets. TIN in gastric cancer was identified as an independent prognostic factor, which could be incorporated into standard TNM staging system to refine risk stratification and predict for overall survival benefit from postoperative chemotherapy in patients with gastric cancer.

  20. Core-shell titanium dioxide-titanium nitride nanotube arrays with near-infrared plasmon resonances

    NASA Astrophysics Data System (ADS)

    Farsinezhad, Samira; Shanavas, Thariq; Mahdi, Najia; Askar, Abdelrahman M.; Kar, Piyush; Sharma, Himani; Shankar, Karthik

    2018-04-01

    Titanium nitride (TiN) is a ceramic with high electrical conductivity which in nanoparticle form, exhibits localized surface plasmon resonances (LSPRs) in the visible region of the solar spectrum. The ceramic nature of TiN coupled with its dielectric loss factor being comparable to that of gold, render it attractive for CMOS polarizers, refractory plasmonics, surface-enhanced Raman scattering and a whole host of sensing applications. We report core-shell TiO2-TiN nanotube arrays exhibiting LSPR peaks in the range 775-830 nm achieved by a simple, solution-based, low cost, large area-compatible fabrication route that does not involve laser-writing or lithography. Self-organized, highly ordered TiO2 nanotube arrays were grown by electrochemical anodization of Ti thin films on fluorine-doped tin oxide-coated glass substrates and then conformally coated with a thin layer of TiN using atomic layer deposition. The effects of varying the TiN layer thickness and thermal annealing on the LSPR profiles were also investigated. Modeling the TiO2-TiN core-shell nanotube structure using two different approaches, one employing effective medium approximations coupled with Fresnel coefficients, resulted in calculated optical spectra that closely matched the experimentally measured spectra. Modeling provided the insight that the observed near-infrared resonance was not collective in nature, and was mainly attributable to the longitudinal resonance of annular nanotube-like TiN particles redshifted due to the presence of the higher permittivity TiO2 matrix. The resulting TiO2-TiN core-shell nanotube structures also function as visible light responsive photocatalysts, as evidenced by their photoelectrochemical water-splitting performance under light emitting diode illumination using 400, 430 and 500 nm photons.

  1. Accuracy of iodine removal using dual-energy CT with or without a tin filter: an experimental phantom study.

    PubMed

    Kawai, Tatsuya; Takeuchi, Mitsuru; Hara, Masaki; Ohashi, Kazuya; Suzuki, Hirochika; Yamada, Kiyotaka; Sugimura, Yuya; Shibamoto, Yuta

    2013-10-01

    The effects of a tin filter on virtual non-enhanced (VNE) images created by dual-energy CT have not been well evaluated. To compare the accuracy of VNE images between those with and without a tin filter. Two different types of columnar phantoms made of agarose gel were evaluated. Phantom A contained various concentrations of iodine (4.5-1590 HU at 120 kVp). Phantom B consisted of a central component (0, 10, 25, and 40 mgI/cm(3)) and a surrounding component (0, 50, 100, and 200 mgI/cm(3)) with variable iodine concentration. They were scanned by dual-source CT in conventional single-energy mode and dual-energy mode with and without a tin filter. CT values on each gel at the corresponding points were measured and the accuracy of iodine removal was evaluated. On VNE images, the CT number of the gel of Phantom A fell within the range between -15 and +15 HU under 626 and 881 HU at single-energy 120 kVp with and without a tin filter, respectively. With attenuation over these thresholds, iodine concentration of gels was underestimated with the tin filter but overestimated without it. For Phantom B, the mean CT numbers on VNE images in the central gel component surrounded by the gel with iodine concentrations of 0, 50, 100, and 200 mgI/cm(3) were in the range of -19-+6 HU and 21-100 HU with and without the tin filter, respectively. Both with and without a tin filter, iodine removal was accurate under a threshold of iodine concentration. Although a surrounding structure with higher attenuation decreased the accuracy, a tin filter improved the margin of error.

  2. Friction and wear of selected metals and alloys in sliding contact with AISI 440 C stainless steel in liquid methane and in liquid natural gas

    NASA Technical Reports Server (NTRS)

    Wisander, D. W.

    1978-01-01

    Aluminum, titanium, beryllium, nickel, iron, copper, and several copper alloys were run in sliding contact with AISI 440C in liquid methane and natural gas. All of the metals run except copper and the copper alloys of tin and tin-lead showed severely galled wear scars. Friction coefficients varied from 0.2 to 1.0, the lowest being for copper, copper-17 wt. % tin, and copper-8 wt. % tin-22 wt. % lead. The wear rate for copper was two orders of magnitude lower than that of the other metals run. An additional order of magnitude of wear reduction was achieved by the addition of tin and/or lead to copper.

  3. Influence of Direct Current Electric Field on Corrosion Behavior of Tin Under a Thin Electrolyte Layer

    NASA Astrophysics Data System (ADS)

    Huang, H. L.; Bu, F. R.; Tian, J.; Liu, D.

    2017-12-01

    The influence of a direct current electric field (DCEF) on corrosion behavior of tin under a thin electrolyte layer was investigated based on an array electrode technology by polarization, electrochemical impedance spectroscopy and surface analysis. The experimental results indicate that the corrosion rate of tin near the positive plate of DCEF increases with increased electric field intensity, which could be attributed to the acceleration of the migration of ions, the removal of corrosion products under DCEF and the damage of tin surface oxide film. Furthermore, tin at different positions in a DCEF exhibits different corrosion behavior, which could be ascribed to the difference of the local corrosion environment caused by the DCEF.

  4. Method of manufacturing tin-doped indium oxide nanofibers

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ozcan, Soydan; Naskar, Amit K

    2017-06-06

    A method of making indium tin oxide nanofibers includes the step of mixing indium and tin precursor compounds with a binder polymer to form a nanofiber precursor composition. The nanofiber precursor composition is co-formed with a supporting polymer to form a composite nanofiber having a precursor composition nanofiber completely surrounded by the supporting polymer composition. The supporting polymer composition is removed from the composite nanofiber to expose the precursor composition nanofiber. The precursor composition nanofiber is then heated in the presence of oxygen such as O.sub.2 to form indium tin oxide and to remove the binder polymer to form anmore » indium tin oxide nanofiber. A method of making metal oxide nanofibers is also disclosed.« less

  5. Geochemistry of tin in rivers and estuaries

    NASA Astrophysics Data System (ADS)

    Byrd, James T.; Andreae, Meinrat O.

    1986-05-01

    On the basis of measurements from a large number of rivers from pristine and polluted regions, we estimate the riverine fluxes of tin to the oceans to be 0.76 × 10 6molyr-1 for the dissolved fraction and 300-600 × 10 6 mol yr -1 for the paniculate fraction. The paniculate flux agrees with the flux calculated from denudation rates. Estuaries were found not to have a large effect upon the transport of tin to the oceans. Evidence for the remobilization of tin was found in an estuary that is highly polluted with tin from mining and smelting activities. Monobutyltin was found to be present in polluted estuaries and is presumed to be a degradation product of tributyltin additives to antifouling paint.

  6. 42 CFR 425.304 - Other program requirements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... interests in the judgment of the referring party. (d) Required reporting of NPIs and TINs. (1) The ACO must... times as specified by CMS the list of each ACO participant's TIN and ACO providers/supplier's NPI that... any changes to the list of NPIs and TINs. ...

  7. 42 CFR 425.304 - Other program requirements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... interests in the judgment of the referring party. (d) Required reporting of NPIs and TINs. (1) The ACO must... times as specified by CMS the list of each ACO participant's TIN and ACO providers/supplier's NPI that... any changes to the list of NPIs and TINs. ...

  8. 26 CFR 301.6721-0 - Table of Contents.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... TINs. (1) In general. (i) Initial solicitation. (ii) First annual solicitation. (iii) Second annual.... (f) Acting in a responsible manner—special rules for incorrect TINs. (1) In general. (i) Initial...) In general. (2) Special rules relating to TINs. (3) Effective dates. (h) Transitional rules for...

  9. 26 CFR 301.6721-0 - Table of Contents.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... TINs. (1) In general. (i) Initial solicitation. (ii) First annual solicitation. (iii) Second annual.... (f) Acting in a responsible manner—special rules for incorrect TINs. (1) In general. (i) Initial...) In general. (2) Special rules relating to TINs. (3) Effective dates. (h) Transitional rules for...

  10. 78 FR 16832 - Corrosion-Resistant Carbon Steel Flat Products From Germany and the Republic of Korea: Revocation...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-19

    .... Excluded from the scope of the orders are flat-rolled steel products either plated or coated with tin, lead, chromium, chromium oxides, both tin and lead (``terne plate''), or both chromium and chromium oxides (``tin...

  11. 42 CFR 425.304 - Other program requirements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... interests in the judgment of the referring party. (d) Required reporting of NPIs and TINs. (1) The ACO must... times as specified by CMS the list of each ACO participant's TIN and ACO providers/supplier's NPI that... any changes to the list of NPIs and TINs. ...

  12. Facile Synthesis of Wormhole-Like Mesoporous Tin Oxide via Evaporation-Induced Self-Assembly and the Enhanced Gas-Sensing Properties

    NASA Astrophysics Data System (ADS)

    Li, Xiaoyu; Peng, Kang; Dou, Yewei; Chen, Jiasheng; Zhang, Yue; An, Gai

    2018-01-01

    Wormhole-like mesoporous tin oxide was synthesized via a facile evaporation-induced self-assembly (EISA) method, and the gas-sensing properties were evaluated for different target gases. The effect of calcination temperature on gas-sensing properties of mesoporous tin oxide was investigated. The results demonstrate that the mesoporous tin oxide sensor calcined at 400 °C exhibits remarkable selectivity to ethanol vapors comparison with other target gases and has a good performance in the operating temperature and response/recovery time. This might be attributed to their high specific surface area and porous structure, which can provide more active sites and generate more chemisorbed oxygen spices to promote the diffusion and adsorption of gas molecules on the surface of the gas-sensing material. A possible formation mechanism of the mesoporous tin oxide and the enhanced gas-sensing mechanism are proposed. The mesoporous tin oxide shows prospective detecting application in the gas sensor fields.

  13. Nature of active tin species and promoting effect of nickle in silica supported tin oxide for dehydrogenation of propane

    NASA Astrophysics Data System (ADS)

    Wang, Haoren; Wang, Hui; Li, Xiuyi; Li, Chunyi

    2017-06-01

    Different with Wang et. al.'s study, we found that polymeric Si-O-Sn2+ rather than Ni-Sn alloy and metallic Sn are active species in silica-supported tin oxide catalysts for dehydrogenation of propane. The results showed that high surface area of mesoporous silica brought about high dispersion of tin oxide species, as a result, catalytic activity and stability were both improved. DRUV-vis, XPS, TPR and XRD studies of fresh and reduced catalysts indicated that the deactivation was related to the reduction of active species rather than the coke formation since active tin species cannot maintain its oxidation state at reaction conditions (high temperature and reducing atmosphere). The formed Ni3Sn2 alloy after reduction just functioned as promoter which accelerated the desorption of H2 and regeneration of active site. A synergy effect between active tin species and Ni3Sn2 alloy were observed.

  14. Potential of tin (IV) chloride for treatment in Alor Pongsu as stabilized landfill leachate

    NASA Astrophysics Data System (ADS)

    Zainal, Sharifah Farah Fariza Syed; Aziz, Hamidi Abdul

    2017-10-01

    Leachate production from landfilling contributes crucial pollutants to the environment. This study examined the potential of tin (IV) chloride as coagulant that involved charge neutralization and sweep flocculation mechanisms. The negative charge of leachate is neutralized by adding tin (IV) chloride as cationic coagulant which resulted precipitation and swept most of the colloids and dissolved solids that entrapped in the settling as hydrous oxide floc. Parameters such as suspended solid (SS) content, color, and chemical oxygen demand (COD) were analyzed using standard jar test procedures. The best condition was observed at pH 8, with removal efficiencies of 75.99 %, 99.29 % and 98.36 % for COD, SS, and color, respectively. At optimum dosage, tin (IV) chloride successfully removed 98.40 % for color, 99.54 % for SS and 71.53 % for COD. These results indicated the satisfactory performance of tin (IV) chloride. Hence, tin (IV) chloride is a potential coagulant for the treatment of Alor Pongsu Landfill leachate.

  15. Dopant-Free Tetrakis-Triphenylamine Hole Transporting Material for Efficient Tin-Based Perovskite Solar Cells.

    PubMed

    Ke, Weijun; Priyanka, Pragya; Vegiraju, Sureshraju; Stoumpos, Constantinos C; Spanopoulos, Ioannis; Soe, Chan Myae Myae; Marks, Tobin J; Chen, Ming-Chou; Kanatzidis, Mercouri G

    2018-01-10

    Developing dopant-free hole transporting layers (HTLs) is critical in achieving high-performance and robust state-of-the-art perovskite photovoltaics, especially for the air-sensitive tin-based perovskite systems. The commonly used HTLs require hygroscopic dopants and additives for optimal performance, which adds extra cost to manufacturing and limits long-term device stability. Here we demonstrate the use of a novel tetrakis-triphenylamine (TPE) small molecule prepared by a facile synthetic route as a superior dopant-free HTL for lead-free tin-based perovskite solar cells. The best-performing tin iodide perovskite cells employing the novel mixed-cation ethylenediammonium/formamidinium with the dopant-free TPE HTL achieve a power conversion efficiency as high as 7.23%, ascribed to the HTL's suitable band alignment and excellent hole extraction/collection properties. This efficiency is one of the highest reported so far for tin halide perovskite systems, highlighting potential application of TPE HTL material in low-cost high-performance tin-based perovskite solar cells.

  16. Electrochemical Formation of Multilayer SnO2-Sb x O y Coating in Complex Electrolyte

    NASA Astrophysics Data System (ADS)

    Maizelis, Antonina; Bairachniy, Boris

    2017-02-01

    The multilayer antimony-doped tin dioxide coating was obtained by cathodic deposition of multilayer metal-hydroxide coating with near 100-nm thickness layers on the alloy underlayer accompanied by the anodic oxidation of this coating. The potential regions of deposition of tin, antimony, tin-antimony alloy, and mixture of this metals and their hydroxides in the pyrophosphate-tartrate electrolyte were revealed by the cyclic voltammetric method. The possibility of oxidation of cathodic deposit consisting of tin and Sn(II) hydroxide compounds to the hydrated tin dioxide in the same electrolyte was demonstrated. The operations of alloy underlayer deposition and oxidation of multilayer metal-hydroxide coating were proposed to carry out in the diluted pyrophosphate-tartrate electrolyte, similar to the main electrolyte. The accelerated tests showed higher service life of the titanium electrode with multilayer antimony-doped tin dioxide coating compared to both electrode with single-layer electrodeposited coating and the electrode with the coating obtained using prolonged heat treatment step.

  17. Electrochemical Formation of Multilayer SnO2-Sb x O y Coating in Complex Electrolyte.

    PubMed

    Maizelis, Antonina; Bairachniy, Boris

    2017-12-01

    The multilayer antimony-doped tin dioxide coating was obtained by cathodic deposition of multilayer metal-hydroxide coating with near 100-nm thickness layers on the alloy underlayer accompanied by the anodic oxidation of this coating. The potential regions of deposition of tin, antimony, tin-antimony alloy, and mixture of this metals and their hydroxides in the pyrophosphate-tartrate electrolyte were revealed by the cyclic voltammetric method. The possibility of oxidation of cathodic deposit consisting of tin and Sn(II) hydroxide compounds to the hydrated tin dioxide in the same electrolyte was demonstrated.The operations of alloy underlayer deposition and oxidation of multilayer metal-hydroxide coating were proposed to carry out in the diluted pyrophosphate-tartrate electrolyte, similar to the main electrolyte.The accelerated tests showed higher service life of the titanium electrode with multilayer antimony-doped tin dioxide coating compared to both electrode with single-layer electrodeposited coating and the electrode with the coating obtained using prolonged heat treatment step.

  18. Determination of total tin in silicate rocks by graphite furnace atomic absorption spectrometry

    USGS Publications Warehouse

    Elsheimer, H.N.; Fries, T.L.

    1990-01-01

    A method is described for the determination of total tin in silicate rocks utilizing a graphite furnace atomic absorption spectrometer with a stabilized-temperature platform furnace and Zeeman-effect background correction. The sample is decomposed by lithium metaborate fusion (3 + 1) in graphite crucibles with the melt being dissolved in 7.5% hydrochloric acid. Tin extractions (4 + 1 or 8 + 1) are executed on portions of the acid solutions using a 4% solution of tricotylphosphine oxide in methyl isobutyl ketone (MIBK). Ascorbic acid is added as a reducing agent prior to extraction. A solution of diammonium hydrogenphosphate and magnesium nitrate is used as a matrix modifier in the graphite furnace determination. The limit of detection is > 10 pg, equivalent to > 1 ??g l-1 of tin in the MIBK solution or 0.2-0.3 ??g g-61 in the rock. The concentration range is linear between 2.5 and 500 ??g l-1 tin in solution. The precision, measured as relative standard deviation, is < 20% at the 2.5 ??g l-1 level and < 7% at the 10-30 ??g l-1 level of tin. Excellent agreement with recommended literature values was found when the method was applied to the international silicate rock standards BCR-1, PCC-1, GSP-1, AGV-1, STM-1, JGb-1 and Mica-Fe. Application was made to the determination of tin in geological core samples with total tin concentrations of the order of 1 ??g g-1 or less.

  19. Alkali Silicate Glass Coatings for Mitigating the Risks of Tin Whiskers

    NASA Astrophysics Data System (ADS)

    Hillman, Dave; Wilcoxon, Ross; Lower, Nate; Grossman, Dan

    2015-12-01

    Alkali silicate glass (ASG) coatings were investigated as a possible method for inhibiting tin whisker initiation and growth. The aqueous-based ASG formulations used in this study were deposited with equipment and conditions that are typical of those used to apply conventional conformal coatings. Processes for controlling ASG coating properties were developed, and a number of ASG-based coating combinations were applied to test components with pure tin surfaces. Coatings were applied both in a laboratory environment at Rockwell Collins and in a manufacturing environment at Plasma Ruggedized Solutions. Testing in elevated humidity/temperature environments and subsequent inspection of the test articles identified coating combinations that inhibited tin whisker growth as well as other material combinations that actually accelerated tin whisker growth. None of the coatings evaluated in this study, including conventional acrylic and Parylene conformal coatings, completely prevented the formation of tin whiskers. Two of the coatings were particularly effective at reducing the risks of whisker growth, albeit through different mechanisms. Parylene conformal coating almost, but not completely, eliminated whisker formation, and only a few tin whiskers were found on these surfaces during the study. A composite of ASG and alumina nanoparticles inhibited whisker formation to a lesser degree than Parylene, but did disrupt whisker growth mechanisms so as to inhibit the formation of long, and more dangerous, tin whiskers. Additional testing also demonstrated that the conformal coatings had relatively little effect on the dielectric loss of a stripline test structure operating at frequencies over 30 GHz.

  20. 40 CFR 421.294 - Standards of performance for new sources.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY Secondary Tin... achieve the following new source performance standards: (a) Tin smelter SO2 scrubber. NSPS for the Secondary Tin Subcategory Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average...

  1. 47 CFR 1.8002 - Obtaining an FRN.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., contact name and title, address, and taxpayer identifying number (TIN) must be provided. For individuals, the TIN is the social security number (SSN). (2) Information provided when registering for an FRN must... as it deems appropriate for its business operations. Each subsidiary with a different TIN must obtain...

  2. 47 CFR 1.8002 - Obtaining an FRN.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., contact name and title, address, and taxpayer identifying number (TIN) must be provided. For individuals, the TIN is the social security number (SSN). (2) Information provided when registering for an FRN must... as it deems appropriate for its business operations. Each subsidiary with a different TIN must obtain...

  3. 40 CFR 471.13 - New source performance standards (NSPS).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... GUIDELINES AND STANDARDS NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY Lead-Tin-Bismuth...-tin-bismuth forming operations' process wastewater shall not exceed the following values: (a) Rolling... monthly average mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with emulsions...

  4. 47 CFR 1.8002 - Obtaining an FRN.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., contact name and title, address, and taxpayer identifying number (TIN) must be provided. For individuals, the TIN is the social security number (SSN). (2) Information provided when registering for an FRN must... as it deems appropriate for its business operations. Each subsidiary with a different TIN must obtain...

  5. 40 CFR 421.294 - Standards of performance for new sources.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY Secondary Tin... achieve the following new source performance standards: (a) Tin smelter SO2 scrubber. NSPS for the Secondary Tin Subcategory Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average...

  6. 40 CFR 421.294 - Standards of performance for new sources.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY Secondary Tin... achieve the following new source performance standards: (a) Tin smelter SO2 scrubber. NSPS for the Secondary Tin Subcategory Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average...

  7. 40 CFR 421.294 - Standards of performance for new sources.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY Secondary Tin... achieve the following new source performance standards: (a) Tin smelter SO2 scrubber. NSPS for the Secondary Tin Subcategory Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average...

  8. 40 CFR 421.294 - Standards of performance for new sources.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY Secondary Tin... achieve the following new source performance standards: (a) Tin smelter SO2 scrubber. NSPS for the Secondary Tin Subcategory Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average...

  9. 40 CFR 471.13 - New source performance standards (NSPS).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... GUIDELINES AND STANDARDS NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY Lead-Tin-Bismuth...-tin-bismuth forming operations' process wastewater shall not exceed the following values: (a) Rolling... monthly average mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with emulsions...

  10. Reversible storage of lithium in a rambutan-like tin-carbon electrode.

    PubMed

    Deng, Da; Lee, Jim Yang

    2009-01-01

    Fruity electrodes: A simple bottom-up self-assembly method was used to fabricate rambutan-like tin-carbon (Sn@C) nanoarchitecture (see scheme, green Sn) to improve the reversible storage of lithium in tin. The mechanism of the growth of the pear-like hairs is explored.

  11. 48 CFR 4.203 - Taxpayer identification information.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... furnished a Taxpayer Identification Number (TIN) when completing the solicitation provision at 52.204-3... the contract sent to the payment office. (b) If the TIN or type of organization is derived from a... last page of the contract or order forwarded to the payment office to state the contractor's TIN and...

  12. 48 CFR 4.902 - General.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...) requires each contractor doing business with a Government agency to furnish its TIN to that agency. 31 U.S... Government payment office and submitted to a disbursing official, the TIN of the contractor receiving payment under the voucher. The TIN may be used by the Government to collect and report on any delinquent amounts...

  13. 26 CFR 301.6724-1 - Reasonable cause.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... waiver where the filer's failure relates to a taxpayer identification number (TIN), and the failure is... incorrect TIN will be deemed to have acted in a responsible manner in compliance with this paragraph (d) only if the filer satisfies the requirements of paragraph (e) of this section (relating to missing TINs...

  14. 31 CFR 359.31 - What definitive Series I savings bonds are included in the computation?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... registered in the name of and bearing the taxpayer identification number (TIN) of that person alone or as co... bearing that person's TIN; and (c) All gift bonds registered in the name of that person but bearing the TIN of the purchaser. ...

  15. 40 CFR 471.14 - Pretreatment standards for existing sources (PSES).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.14 Pretreatment standards for existing sources (PSES... in lead-tin-bismuth forming process wastewater introduced into a POTW shall not exceed the following... Maximum for monthly average mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with...

  16. 47 CFR 1.923 - Content of applications.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... (TINs). Wireless applicants and licensees, including all attributable owners of auctionable licenses as defined by § 1.2112 of this part, are required to provide their Taxpayer Identification Numbers (TINS) (as... (DCIA). Under the DCIA, the FCC may use an applicant or licensee's TIN for purposes of collecting and...

  17. 40 CFR 471.14 - Pretreatment standards for existing sources (PSES).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-Tin-Bismuth Forming Subcategory § 471.14 Pretreatment standards for existing sources (PSES). Except as...-tin-bismuth forming process wastewater introduced into a POTW shall not exceed the following values... Maximum for monthly average mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with...

  18. 48 CFR 4.902 - General.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...) requires each contractor doing business with a Government agency to furnish its TIN to that agency. 31 U.S... Government payment office and submitted to a disbursing official, the TIN of the contractor receiving payment under the voucher. The TIN may be used by the Government to collect and report on any delinquent amounts...

  19. 78 FR 70102 - Advisory Committee to the Internal Revenue Service; Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-22

    ...)--additional addresses; Missing TINS for Employer and Insurer Reporting; Minimum Essential Coverage, Premium... (TIN) Matching Program to Improve the Accuracy of Information Reporting; IRC Sec. 6050W and Form 1099-K Reporting; Taxpayer Identification Number (TIN) Truncation; Stripped Tax Credits; Form 1098-T; Form 8300...

  20. 48 CFR 2152.204-70 - Taxpayer Identification Number.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... basis, and of which the Contractor is a member. Taxpayer Identification Number (TIN), as used in this... reporting income tax and other returns. The TIN is the Contractor's Social Security Number. (b) The... information will result in payment being withheld until the TIN is provided. (c) The Government may use the...

  1. 46 CFR 160.026-3 - Container.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... on the outside. The can shall be made of 1.25-pound coating coke tin-plate throughout, with not less.... The interior of the container shall be uncoated, except for the tin-plating required by paragraph (a) of this section. In addition to the tin-plating, the exterior surfaces of the container, including...

  2. 48 CFR 4.203 - Taxpayer identification information.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... furnished a Taxpayer Identification Number (TIN) when completing the solicitation provision at 52.204-3... the contract sent to the payment office. (b) If the TIN or type of organization is derived from a... last page of the contract or order forwarded to the payment office to state the contractor's TIN and...

  3. 47 CFR 1.923 - Content of applications.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Identification Number (TINs). Wireless applicants and licensees, including all attributable owners of auctionable... (TINS) (as defined in 26 U.S.C. 6109) to the Commission, pursuant to the Debt Collection Improvement Act of 1996 (DCIA). Under the DCIA, the FCC may use an applicant or licensee's TIN for purposes of...

  4. 48 CFR 4.902 - General.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...) requires each contractor doing business with a Government agency to furnish its TIN to that agency. 31 U.S... Government payment office and submitted to a disbursing official, the TIN of the contractor receiving payment under the voucher. The TIN may be used by the Government to collect and report on any delinquent amounts...

  5. 40 CFR 471.13 - New source performance standards (NSPS).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...-Tin-Bismuth Forming Subcategory § 471.13 New source performance standards (NSPS). Any new source... pollutants in the lead-tin-bismuth forming operations' process wastewater shall not exceed the following... Maximum for monthly average mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with...

  6. 42 CFR 414.1205 - Definitions.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... physicians means a single Tax Identification Number (TIN) with 2 or more eligible professionals, as... rights to the TIN. Performance period means the calendar year that will be used to assess the quality of...) model. Taxpayer Identification Number (TIN) has the same meaning given this term under § 425.20 of this...

  7. 40 CFR 471.14 - Pretreatment standards for existing sources (PSES).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.14 Pretreatment standards for existing sources (PSES... in lead-tin-bismuth forming process wastewater introduced into a POTW shall not exceed the following... Maximum for monthly average mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with...

  8. 40 CFR 471.13 - New source performance standards (NSPS).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...-Tin-Bismuth Forming Subcategory § 471.13 New source performance standards (NSPS). Any new source... pollutants in the lead-tin-bismuth forming operations' process wastewater shall not exceed the following... Maximum for monthly average mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with...

  9. 46 CFR 160.026-3 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... on the outside. The can shall be made of 1.25-pound coating coke tin-plate throughout, with not less.... The interior of the container shall be uncoated, except for the tin-plating required by paragraph (a) of this section. In addition to the tin-plating, the exterior surfaces of the container, including...

  10. 26 CFR 31.3406-0 - Outline of the backup withholding regulations.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... incorrect name/TIN combination. (2) Definition of account. (3) Definition of business day. (4) Certain exceptions. (c) Notice regarding an incorrect name/TIN combination. (1) In general. (2) Additional... of receipt. (d) Notice from payors of backup withholding due to an incorrect name/TIN combination. (1...

  11. 26 CFR 301.6724-1 - Reasonable cause.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... waiver where the filer's failure relates to a taxpayer identification number (TIN), and the failure is... incorrect TIN will be deemed to have acted in a responsible manner in compliance with this paragraph (d) only if the filer satisfies the requirements of paragraph (e) of this section (relating to missing TINs...

  12. 26 CFR 301.6724-1 - Reasonable cause.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... waiver where the filer's failure relates to a taxpayer identification number (TIN), and the failure is... incorrect TIN will be deemed to have acted in a responsible manner in compliance with this paragraph (d) only if the filer satisfies the requirements of paragraph (e) of this section (relating to missing TINs...

  13. 48 CFR 4.203 - Taxpayer identification information.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... furnished a Taxpayer Identification Number (TIN) when completing the solicitation provision at 52.204-3... the contract sent to the payment office. (b) If the TIN or type of organization is derived from a... last page of the contract or order forwarded to the payment office to state the contractor's TIN and...

  14. 47 CFR 1.923 - Content of applications.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... (TINs). Wireless applicants and licensees, including all attributable owners of auctionable licenses as defined by § 1.2112 of this part, are required to provide their Taxpayer Identification Numbers (TINS) (as... (DCIA). Under the DCIA, the FCC may use an applicant or licensee's TIN for purposes of collecting and...

  15. 42 CFR 414.1205 - Definitions.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... physicians means a single Tax Identification Number (TIN) with 2 or more eligible professionals, as... rights to the TIN. Performance period means the calendar year that will be used to assess the quality of...) model. Taxpayer Identification Number (TIN) has the same meaning given this term under § 425.20 of this...

  16. 78 FR 54986 - Information Reporting of Minimum Essential Coverage

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-09

    ... to report (1) the name, address, and taxpayer identification number (TIN) of the primary insured, (2) the name, dates of coverage, and TIN of each individual covered under a policy, (3) whether health... effect, the names and TINs of each individual covered, the amount of advance credit payments relating to...

  17. 48 CFR 4.902 - General.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...) requires each contractor doing business with a Government agency to furnish its TIN to that agency. 31 U.S... Government payment office and submitted to a disbursing official, the TIN of the contractor receiving payment under the voucher. The TIN may be used by the Government to collect and report on any delinquent amounts...

  18. 31 CFR 359.31 - What definitive Series I savings bonds are included in the computation?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... registered in the name of and bearing the taxpayer identification number (TIN) of that person alone or as co... bearing that person's TIN; and (c) All gift bonds registered in the name of that person but bearing the TIN of the purchaser. ...

  19. 40 CFR 471.13 - New source performance standards (NSPS).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...-Tin-Bismuth Forming Subcategory § 471.13 New source performance standards (NSPS). Any new source... pollutants in the lead-tin-bismuth forming operations' process wastewater shall not exceed the following... Maximum for monthly average mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with...

  20. 26 CFR 301.6724-1 - Reasonable cause.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... waiver where the filer's failure relates to a taxpayer identification number (TIN), and the failure is... incorrect TIN will be deemed to have acted in a responsible manner in compliance with this paragraph (d) only if the filer satisfies the requirements of paragraph (e) of this section (relating to missing TINs...

  1. 48 CFR 4.203 - Taxpayer identification information.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... furnished a Taxpayer Identification Number (TIN) when completing the solicitation provision at 52.204-3... the contract sent to the payment office. (b) If the TIN or type of organization is derived from a... last page of the contract or order forwarded to the payment office to state the contractor's TIN and...

  2. 46 CFR 160.026-3 - Container.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... on the outside. The can shall be made of 1.25-pound coating coke tin-plate throughout, with not less.... The interior of the container shall be uncoated, except for the tin-plating required by paragraph (a) of this section. In addition to the tin-plating, the exterior surfaces of the container, including...

  3. 48 CFR 4.902 - General.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...) requires each contractor doing business with a Government agency to furnish its TIN to that agency. 31 U.S... Government payment office and submitted to a disbursing official, the TIN of the contractor receiving payment under the voucher. The TIN may be used by the Government to collect and report on any delinquent amounts...

  4. 48 CFR 2152.204-70 - Taxpayer Identification Number.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... basis, and of which the Contractor is a member. Taxpayer Identification Number (TIN), as used in this... reporting income tax and other returns. The TIN is the Contractor's Social Security Number. (b) The... information will result in payment being withheld until the TIN is provided. (c) The Government may use the...

  5. 48 CFR 2152.204-70 - Taxpayer Identification Number.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... basis, and of which the Contractor is a member. Taxpayer Identification Number (TIN), as used in this... reporting income tax and other returns. The TIN is the Contractor's Social Security Number. (b) The... information will result in payment being withheld until the TIN is provided. (c) The Government may use the...

  6. 40 CFR 471.14 - Pretreatment standards for existing sources (PSES).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-Tin-Bismuth Forming Subcategory § 471.14 Pretreatment standards for existing sources (PSES). Except as...-tin-bismuth forming process wastewater introduced into a POTW shall not exceed the following values... Maximum for monthly average mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with...

  7. 46 CFR 160.026-3 - Container.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... on the outside. The can shall be made of 1.25-pound coating coke tin-plate throughout, with not less.... The interior of the container shall be uncoated, except for the tin-plating required by paragraph (a) of this section. In addition to the tin-plating, the exterior surfaces of the container, including...

  8. 48 CFR 2152.204-70 - Taxpayer Identification Number.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... basis, and of which the Contractor is a member. Taxpayer Identification Number (TIN), as used in this... reporting income tax and other returns. The TIN is the Contractor's Social Security Number. (b) The... information will result in payment being withheld until the TIN is provided. (c) The Government may use the...

  9. 47 CFR 1.923 - Content of applications.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Identification Number (TINs). Wireless applicants and licensees, including all attributable owners of auctionable... (TINS) (as defined in 26 U.S.C. 6109) to the Commission, pursuant to the Debt Collection Improvement Act of 1996 (DCIA). Under the DCIA, the FCC may use an applicant or licensee's TIN for purposes of...

  10. 46 CFR 160.026-3 - Container.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... on the outside. The can shall be made of 1.25-pound coating coke tin-plate throughout, with not less.... The interior of the container shall be uncoated, except for the tin-plating required by paragraph (a) of this section. In addition to the tin-plating, the exterior surfaces of the container, including...

  11. 48 CFR 2152.204-70 - Taxpayer Identification Number.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... basis, and of which the Contractor is a member. Taxpayer Identification Number (TIN), as used in this... reporting income tax and other returns. The TIN is the Contractor's Social Security Number. (b) The... information will result in payment being withheld until the TIN is provided. (c) The Government may use the...

  12. 48 CFR 4.203 - Taxpayer identification information.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... furnished a Taxpayer Identification Number (TIN) when completing the solicitation provision at 52.204-3... the contract sent to the payment office. (b) If the TIN or type of organization is derived from a... last page of the contract or order forwarded to the payment office to state the contractor's TIN and...

  13. 47 CFR 1.923 - Content of applications.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Identification Number (TINs). Wireless applicants and licensees, including all attributable owners of auctionable... (TINS) (as defined in 26 U.S.C. 6109) to the Commission, pursuant to the Debt Collection Improvement Act of 1996 (DCIA). Under the DCIA, the FCC may use an applicant or licensee's TIN for purposes of...

  14. 40 CFR 471.14 - Pretreatment standards for existing sources (PSES).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.14 Pretreatment standards for existing sources (PSES... in lead-tin-bismuth forming process wastewater introduced into a POTW shall not exceed the following... Maximum for monthly average mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with...

  15. Exploration computer applications to primary dispersion halos: Kougarok tin prospect, Seward Peninsula, Alaska, USA

    USGS Publications Warehouse

    Reid, Jeffrey C.

    1989-01-01

    Computer processing and high resolution graphics display of geochemical data were used to quickly, accurately, and efficiently obtain important decision-making information for tin (cassiterite) exploration, Seward Peninsula, Alaska (USA). Primary geochemical dispersion patterns were determined for tin-bearing intrusive granite phases of Late Cretaceous age with exploration bedrock lithogeochemistry at the Kougarok tin prospect. Expensive diamond drilling footage was required to reach exploration objectives. Recognition of element distribution and dispersion patterns was useful in subsurface interpretation and correlation, and to aid location of other holes.

  16. Tin induced a-Si crystallization in thin films of Si-Sn alloys

    NASA Astrophysics Data System (ADS)

    Neimash, V.; Poroshin, V.; Shepeliavyi, P.; Yukhymchuk, V.; Melnyk, V.; Kuzmich, A.; Makara, V.; Goushcha, A. O.

    2013-12-01

    Effects of tin doping on crystallization of amorphous silicon were studied using Raman scattering, Auger spectroscopy, scanning electron microscopy, and X-ray fluorescence techniques. Formation of silicon nanocrystals (2-4 nm in size) in the amorphous matrix of Si1-xSnx, obtained by physical vapor deposition of the components in vacuum, was observed at temperatures around 300 °C. The aggregate volume of nanocrystals in the deposited film of Si1-xSnx exceeded 60% of the total film volume and correlated well with the tin content. Formation of structures with ˜80% partial volume of the nanocrystalline phase was also demonstrated. Tin-induced crystallization of amorphous silicon occurred only around the clusters of metallic tin, which suggested the crystallization mechanism involving an interfacial molten Si:Sn layer.

  17. Titanium nitride as a seed layer for Heusler compounds

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Niesen, Alessia, E-mail: aniesen@physik.uni-bielefeld.de; Glas, Manuel; Ludwig, Jana

    Titanium nitride (TiN) shows low resistivity at room temperature (27 μΩ cm), high thermal stability and thus has the potential to serve as seed layer in magnetic tunnel junctions. High quality TiN thin films with regard to the crystallographic and electrical properties were grown and characterized by x-ray diffraction and 4-terminal transport measurements. Element specific x-ray absorption spectroscopy revealed pure TiN inside the thin films. To investigate the influence of a TiN seed layer on a ferro(i)magnetic bottom electrode in magnetic tunnel junctions, an out-of-plane magnetized Mn{sub 2.45}Ga as well as in- and out-of-plane magnetized Co{sub 2}FeAl thin films were depositedmore » on a TiN buffer, respectively. The magnetic properties were investigated using a superconducting quantum interference device and anomalous Hall effect for Mn{sub 2.45}Ga. Magneto optical Kerr effect measurements were carried out to investigate the magnetic properties of Co{sub 2}FeAl. TiN buffered Mn{sub 2.45}Ga thin films showed higher coercivity and squareness ratio compared to unbuffered samples. The Heusler compound Co{sub 2}FeAl showed already good crystallinity when grown at room temperature on a TiN seed-layer.« less

  18. Effect of microstructure on the breakage of tin bronze machining chips during pulverization via jet milling

    NASA Astrophysics Data System (ADS)

    Afshari, Elham; Ghambari, Mohammad; Farhangi, Hasan

    2016-11-01

    In this study, jet milling was used to recycle tin bronze machining chips into powder. The main purpose of this study was to assess the effect of the microstructure of tin bronze machining chips on their breakage behavior. An experimental target jet mill was used to pulverize machining chips of three different tin bronze alloys containing 7wt%, 10wt%, and 12wt% of tin. Optical and electron microscopy, as well as sieve analysis, were used to follow the trend of pulverization. Each alloy exhibited a distinct rate of size reduction, particle size distribution, and fracture surface appearance. The results showed that the degree of pulverization substantially increased with increasing tin content. This behavior was attributed to the higher number of machining cracks as well as the increased volume fraction of brittle δ phase in the alloys with higher tin contents. The δ phase was observed to strongly influence the creation of machining cracks as well as the nucleation and propagation of cracks during jet milling. In addition, a direct relationship was observed between the mean δ-phase spacing and the mean size of the jet-milled product; i.e., a decrease in the δ-phase spacing resulted in smaller particles.

  19. Structural characterization of a bridged 99Tc-Sn-dimethylglyoxime complex: implications for the chemistry of 99mTc-radiopharmaceuticals prepared by the Sn (II) reduction of pertechnetate.

    PubMed Central

    Deutsch, E; Elder, R C; Lange, B A; Vaal, M J; Lay, D G

    1976-01-01

    Reduction of pertechnetate by tin(II) in the presence of dimethylglyoxime is shown, by single crystal x-ray analysis, to yield a technetium-tin-dimethylglyoxime complex in which tin and technetium are intimately connected by a triple bridging arrangement. One bridge consists of a single oxygen atom and it is hypothesized that this bridge arises from the inner sphere reduction of technetium by tin(II), the electrons being transferred through a technetium "yl" oxygen which eventually becomes the bridging atom. Two additional bridges arise from two dimethylglyoxime ligands that function as bidentate nitrogen donors towards Tc and monodentate oxygen donors towards Sn. The tin atom can thus be viewed as providing a three-pronged "cap" on one end of the Tc-dimethylglyoxime complex. The additional coordination sites around Tc are occupied by the two nitrogens of a third dimethylglyoxime ligand, making the Tc seven-coordinate. The additional coordination sites around Sn are occupied by three chloride anions, giving the Sn a fac octahedral coordination environment. From indirect evidence the oxidation states of tin and technetium are tentatively assigned to be IV and V, respectively. Since most 99mTc-radiopharmaceuticals are synthesized by the tin(II) reduction of pertechnetate, it is likely that the Sn-O-Tc linkage described in this work is an important feature of the chemistry of these species. This linkage also provides a ready rationale for the close association of tin and technetium observed in many 99mTc-radiopharmaceuticals. PMID:1069984

  20. 42 CFR 495.10 - Participation requirements for EPs, eligible hospitals, and CAHs.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Certification Number (CCN) and its Taxpayer Identification Number (TIN). (c) Subject to paragraph (f) of this... in a manner specified by CMS, the Taxpayer Identification Number (TIN) which may be the EP's Social... EPs may also assign their incentive payments to a TIN for an entity promoting the adoption of EHR...

  1. 40 CFR 421.292 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... CATEGORY Secondary Tin Subcategory § 421.292 Effluent limitations guidelines representing the degree of... attainable by the application of the best practicable technology currently available: (a) Tin smelter SO2 scrubber. BPT Limitations for the Secondary Tin Subcategory Pollutant or pollutant property Maximum for any...

  2. 40 CFR 471.15 - Pretreatment standards for new sources (PSNS).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.15 Pretreatment standards for new sources (PSNS... pretreatment standards for new sources. The mass of wastewater pollutants in lead-tin-bismuth forming process... (pounds per million off-pounds) of lead-tin-bismuth rolled with emulsions Antimony 0.067 0.030 Lead 0.010...

  3. 48 CFR 1652.204-73 - Taxpayer Identification Number.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Identification Number (TIN), as used in this provision, means the number required by the Internal Revenue Service... information will result in payment being withheld until the TIN number is provided. (c) The Government may use the TIN to collect and report on any delinquent amounts arising out of the Carrier's relationship with...

  4. 76 FR 2091 - Indian Education Formula Grants to Local Educational Agencies; Office of Elementary and Secondary...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-12

    ... System (DUNS) number and a Taxpayer Identification Number (TIN); b. Register both your DUNS number and TIN with the Central Contractor Registry (CCR), the Government's primary registrant database; c. Provide your DUNS number and TIN on your application; and d. Maintain an active CCR registration with...

  5. 48 CFR 1652.204-73 - Taxpayer Identification Number.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Identification Number (TIN), as used in this provision, means the number required by the Internal Revenue Service... information will result in payment being withheld until the TIN number is provided. (c) The Government may use the TIN to collect and report on any delinquent amounts arising out of the Carrier's relationship with...

  6. 40 CFR 437.44 - Effluent limitations attainable by the application of the best available technology economically...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Antimony Arsenic Cadmium Chromium Cobalt Copper Lead Mercury Nickel Silver Tin Titanium Vanadium Zinc (2... Lead Mercury Nickel Silver Tin Titanium Vanadium Zinc (2) The in-plant limitations that apply to metal... parameters Antimony Arsenic Cadmium Chromium Cobalt Copper Lead Mercury Nickel Silver Tin Titanium Vanadium...

  7. 40 CFR 421.292 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... CATEGORY Secondary Tin Subcategory § 421.292 Effluent limitations guidelines representing the degree of... attainable by the application of the best practicable technology currently available: (a) Tin smelter SO2 scrubber. BPT Limitations for the Secondary Tin Subcategory Pollutant or pollutant property Maximum for any...

  8. 40 CFR 471.15 - Pretreatment standards for new sources (PSNS).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.15 Pretreatment standards for new sources (PSNS... pretreatment standards for new sources. The mass of wastewater pollutants in lead-tin-bismuth forming process... (pounds per million off-pounds) of lead-tin-bismuth rolled with emulsions Antimony 0.067 0.030 Lead 0.010...

  9. 47 CFR 1.1706 - Content of filings.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Mexico. (f) Taxpayer Identification Number (TINs). All filers are required to provide their Taxpayer Identification Numbers (TINS) (as defined in 26 U.S.C. 6109) to the Commission, pursuant to the Debt Collection Improvement Act of 1996 (DCIA). Under the DCIA, the FCC may use an applicant or licensee's TIN for purposes of...

  10. 21 CFR 73.1646 - Bronze powder.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... electrolytic copper and zinc with small amounts of the virgin metals aluminum and tin. It contains small... part per million Aluminum (as Al), not more than 0.5 percent. Tin (as Sn), not more than 0.5 percent... percent. Maximum particle size 45µ (95 percent minimum). Aluminum, zinc, tin, and copper content shall be...

  11. 48 CFR 1652.204-73 - Taxpayer Identification Number.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Identification Number (TIN), as used in this provision, means the number required by the Internal Revenue Service... information will result in payment being withheld until the TIN number is provided. (c) The Government may use the TIN to collect and report on any delinquent amounts arising out of the Carrier's relationship with...

  12. 48 CFR 1652.204-73 - Taxpayer Identification Number.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Identification Number (TIN), as used in this provision, means the number required by the Internal Revenue Service... information will result in payment being withheld until the TIN number is provided. (c) The Government may use the TIN to collect and report on any delinquent amounts arising out of the Carrier's relationship with...

  13. 40 CFR 437.44 - Effluent limitations attainable by the application of the best available technology economically...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Antimony Arsenic Cadmium Chromium Cobalt Copper Lead Mercury Nickel Silver Tin Titanium Vanadium Zinc (2... Lead Mercury Nickel Silver Tin Titanium Vanadium Zinc (2) The in-plant limitations that apply to metal... parameters Antimony Arsenic Cadmium Chromium Cobalt Copper Lead Mercury Nickel Silver Tin Titanium Vanadium...

  14. 40 CFR 471.15 - Pretreatment standards for new sources (PSNS).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-Tin-Bismuth Forming Subcategory § 471.15 Pretreatment standards for new sources (PSNS). Except as... standards for new sources. The mass of wastewater pollutants in lead-tin-bismuth forming process wastewater... million off-pounds) of lead-tin-bismuth rolled with emulsions Antimony 0.067 0.030 Lead 0.010 0.005 (b...

  15. 48 CFR 52.204-3 - Taxpayer identification.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... a consolidated basis, and of which the offeror is a member. Taxpayer Identification Number (TIN), as... the offeror in reporting income tax and other returns. The TIN may be either a Social Security Number... information may result in a 31 percent reduction of payments otherwise due under the contract. (c) The TIN may...

  16. 47 CFR 1.1706 - Content of filings.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Mexico. (f) Taxpayer Identification Number (TINs). All filers are required to provide their Taxpayer Identification Numbers (TINS) (as defined in 26 U.S.C. 6109) to the Commission, pursuant to the Debt Collection Improvement Act of 1996 (DCIA). Under the DCIA, the FCC may use an applicant or licensee's TIN for purposes of...

  17. 78 FR 55689 - Applications for Fiscal Year 2014 Awards; Impact Aid Section 8002 Grant Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-11

    ... System (DUNS) number and a Taxpayer Identification Number (TIN); b. Register both your DUNS number and TIN with the System for Award Management (SAM) (formerly the Central Contractor Registry (CCR)), the Government's primary registrant database; c. Provide your DUNS number and TIN on your application; and d...

  18. 40 CFR 421.293 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Tin Subcategory § 421.293 Effluent limitations guidelines representing the degree of effluent... application of the best available technology economically achievable: (a) Tin smelter SO2 scrubber. BAT Limitations for the Secondary Tin Subcategory Pollutant or pollutant property Maximum for any 1 day Maximum...

  19. 42 CFR 495.10 - Participation requirements for EPs, eligible hospitals, and CAHs.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... manner specified by CMS its CMS Certification Number (CCN) and its Taxpayer Identification Number (TIN... Number (TIN) which may be the EP's Social Security Number (SSN) to which the EP's incentive payment... CFR part 424 subpart F. (ii) Medicaid EPs may also assign their incentive payments to a TIN for an...

  20. 42 CFR 495.10 - Participation requirements for EPs, eligible hospitals, and CAHs.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Certification Number (CCN) and its Taxpayer Identification Number (TIN). (c) Subject to paragraph (f) of this... in a manner specified by CMS, the Taxpayer Identification Number (TIN) which may be the EP's Social... EPs may also assign their incentive payments to a TIN for an entity promoting the adoption of EHR...

  1. 40 CFR 421.293 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Tin Subcategory § 421.293 Effluent limitations guidelines representing the degree of effluent... application of the best available technology economically achievable: (a) Tin smelter SO2 scrubber. BAT Limitations for the Secondary Tin Subcategory Pollutant or pollutant property Maximum for any 1 day Maximum...

  2. 21 CFR 73.1646 - Bronze powder.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... electrolytic copper and zinc with small amounts of the virgin metals aluminum and tin. It contains small... part per million Aluminum (as Al), not more than 0.5 percent. Tin (as Sn), not more than 0.5 percent... percent. Maximum particle size 45µ (95 percent minimum). Aluminum, zinc, tin, and copper content shall be...

  3. 40 CFR 421.292 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... CATEGORY Secondary Tin Subcategory § 421.292 Effluent limitations guidelines representing the degree of... attainable by the application of the best practicable technology currently available: (a) Tin smelter SO2 scrubber. BPT Limitations for the Secondary Tin Subcategory Pollutant or pollutant property Maximum for any...

  4. 40 CFR 421.292 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... CATEGORY Secondary Tin Subcategory § 421.292 Effluent limitations guidelines representing the degree of... attainable by the application of the best practicable technology currently available: (a) Tin smelter SO2 scrubber. BPT Limitations for the Secondary Tin Subcategory Pollutant or pollutant property Maximum for any...

  5. 40 CFR 437.44 - Effluent limitations attainable by the application of the best available technology economically...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Antimony Arsenic Cadmium Chromium Cobalt Copper Lead Mercury Nickel Silver Tin Titanium Vanadium Zinc (2... Lead Mercury Nickel Silver Tin Titanium Vanadium Zinc (2) The in-plant limitations that apply to metal... parameters Antimony Arsenic Cadmium Chromium Cobalt Copper Lead Mercury Nickel Silver Tin Titanium Vanadium...

  6. 78 FR 22860 - Applications for New Awards; National Institute on Disability and Rehabilitation Research...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-17

    ... Data Universal Numbering System (DUNS) number and a Taxpayer Identification Number (TIN); b. Register both your DUNS number and TIN with the Central Contractor Registry (CCR)--and, after July 24, 2012... your DUNS number and TIN on your application; and d. Maintain an active CRR or SAM registration with...

  7. 42 CFR 495.10 - Participation requirements for EPs, eligible hospitals, and CAHs.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... manner specified by CMS its CMS Certification Number (CCN) and its Taxpayer Identification Number (TIN... Number (TIN) which may be the EP's Social Security Number (SSN) to which the EP's incentive payment... CFR part 424 subpart F. (ii) Medicaid EPs may also assign their incentive payments to a TIN for an...

  8. 48 CFR 52.204-3 - Taxpayer identification.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... a consolidated basis, and of which the offeror is a member. Taxpayer Identification Number (TIN), as... the offeror in reporting income tax and other returns. The TIN may be either a Social Security Number... information may result in a 31 percent reduction of payments otherwise due under the contract. (c) The TIN may...

  9. 40 CFR 471.15 - Pretreatment standards for new sources (PSNS).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.15 Pretreatment standards for new sources (PSNS... pretreatment standards for new sources. The mass of wastewater pollutants in lead-tin-bismuth forming process... (pounds per million off-pounds) of lead-tin-bismuth rolled with emulsions Antimony 0.067 0.030 Lead 0.010...

  10. 48 CFR 52.204-3 - Taxpayer identification.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... a consolidated basis, and of which the offeror is a member. Taxpayer Identification Number (TIN), as... the offeror in reporting income tax and other returns. The TIN may be either a Social Security Number... information may result in a 31 percent reduction of payments otherwise due under the contract. (c) The TIN may...

  11. 78 FR 319 - Agency Information Collection Activities: Submission for the Office of Management and Budget (OMB...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-03

    ... that agencies collect taxpayer identification numbers (TINs) from individuals who do business with the Government, including contractors and recipients of credit, licenses, permits, and benefits. The TIN will be... Department of the Treasury. The Department of the Treasury will use the TIN to determine whether the refund...

  12. 76 FR 80351 - Application for New Awards; Indian Education Formula Grants to Local Educational Agencies

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-23

    ... Numbering System (DUNS) number and a Taxpayer Identification Number (TIN); b. Register both your DUNS number and TIN with the Central Contractor Registry (CCR), the Government's primary registrant database; c. Provide your DUNS number and TIN on your application; and d. Maintain an active CCR registration with...

  13. 48 CFR 52.204-3 - Taxpayer identification.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... a consolidated basis, and of which the offeror is a member. Taxpayer Identification Number (TIN), as... the offeror in reporting income tax and other returns. The TIN may be either a Social Security Number... information may result in a 31 percent reduction of payments otherwise due under the contract. (c) The TIN may...

  14. 76 FR 62833 - Notice of Inventory Completion: University of Colorado Museum, Boulder, CO

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-11

    .... In November 2009, the human remains (TIN 0290) were found in the museum collection. The human remains...) (TIN 0091) were found in the collection. The human remains have been identified as Mogollon- most..., the human remains (a tooth) (TIN 0162) were found in the collection. The human remains have been...

  15. 26 CFR 1.25-8T - Reporting requirements (Temporary).

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 8329 with the information required therein, including— (i) The name, address, and TIN of the issuer of... bonds with respect to that mortgage credit certificate was made, (iii) The name, address, and TIN of the...) The name, address, and TIN of each holder of a qualified mortgage credit certificate with respect to...

  16. 40 CFR 421.293 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Tin Subcategory § 421.293 Effluent limitations guidelines representing the degree of effluent... application of the best available technology economically achievable: (a) Tin smelter SO2 scrubber. BAT Limitations for the Secondary Tin Subcategory Pollutant or pollutant property Maximum for any 1 day Maximum...

  17. 40 CFR 437.44 - Effluent limitations attainable by the application of the best available technology economically...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Antimony Arsenic Cadmium Chromium Cobalt Copper Lead Mercury Nickel Silver Tin Titanium Vanadium Zinc (2... Lead Mercury Nickel Silver Tin Titanium Vanadium Zinc (2) The in-plant limitations that apply to metal... parameters Antimony Arsenic Cadmium Chromium Cobalt Copper Lead Mercury Nickel Silver Tin Titanium Vanadium...

  18. 21 CFR 73.1646 - Bronze powder.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... electrolytic copper and zinc with small amounts of the virgin metals aluminum and tin. It contains small... part per million Aluminum (as Al), not more than 0.5 percent. Tin (as Sn), not more than 0.5 percent... percent. Maximum particle size 45µ (95 percent minimum). Aluminum, zinc, tin, and copper content shall be...

  19. 26 CFR 1.25-8T - Reporting requirements (Temporary).

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 8329 with the information required therein, including— (i) The name, address, and TIN of the issuer of... bonds with respect to that mortgage credit certificate was made, (iii) The name, address, and TIN of the...) The name, address, and TIN of each holder of a qualified mortgage credit certificate with respect to...

  20. 48 CFR 52.204-3 - Taxpayer identification.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... a consolidated basis, and of which the offeror is a member. Taxpayer Identification Number (TIN), as... the offeror in reporting income tax and other returns. The TIN may be either a Social Security Number... information may result in a 31 percent reduction of payments otherwise due under the contract. (c) The TIN may...

  1. 78 FR 29349 - Applications for New Awards; National Institute on Disability and Rehabilitation Research...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-20

    ... System (DUNS) number and a Taxpayer Identification Number (TIN); b. Register both your DUNS number and TIN with the Central Contractor Registry (CCR)--and, after July 24, 2012, with the System for Award Management (SAM), the Government's primary registrant database; c. Provide your DUNS number and TIN on your...

  2. 42 CFR 495.10 - Participation requirements for EPs, eligible hospitals, and CAHs.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Certification Number (CCN) and its Taxpayer Identification Number (TIN). (c) Subject to paragraph (f) of this... in a manner specified by CMS, the Taxpayer Identification Number (TIN) which may be the EP's Social... EPs may also assign their incentive payments to a TIN for an entity promoting the adoption of EHR...

  3. 21 CFR 73.1646 - Bronze powder.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... electrolytic copper and zinc with small amounts of the virgin metals aluminum and tin. It contains small... part per million Aluminum (as Al), not more than 0.5 percent. Tin (as Sn), not more than 0.5 percent... percent. Maximum particle size 45µ (95 percent minimum). Aluminum, zinc, tin, and copper content shall be...

  4. 48 CFR 1652.204-73 - Taxpayer Identification Number.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Identification Number (TIN), as used in this provision, means the number required by the Internal Revenue Service... information will result in payment being withheld until the TIN number is provided. (c) The Government may use the TIN to collect and report on any delinquent amounts arising out of the Carrier's relationship with...

  5. 40 CFR 437.44 - Effluent limitations attainable by the application of the best available technology economically...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Antimony Arsenic Cadmium Chromium Cobalt Copper Lead Mercury Nickel Silver Tin Titanium Vanadium Zinc (2... Lead Mercury Nickel Silver Tin Titanium Vanadium Zinc (2) The in-plant limitations that apply to metal... parameters Antimony Arsenic Cadmium Chromium Cobalt Copper Lead Mercury Nickel Silver Tin Titanium Vanadium...

  6. 21 CFR 73.1646 - Bronze powder.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... electrolytic copper and zinc with small amounts of the virgin metals aluminum and tin. It contains small... part per million Aluminum (as Al), not more than 0.5 percent. Tin (as Sn), not more than 0.5 percent... percent. Maximum particle size 45µ (95 percent minimum). Aluminum, zinc, tin, and copper content shall be...

  7. 47 CFR 1.1706 - Content of filings.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Mexico. (f) Taxpayer Identification Number (TINs). All filers are required to provide their Taxpayer Identification Numbers (TINS) (as defined in 26 U.S.C. 6109) to the Commission, pursuant to the Debt Collection Improvement Act of 1996 (DCIA). Under the DCIA, the FCC may use an applicant or licensee's TIN for purposes of...

  8. 26 CFR 1.25-8T - Reporting requirements (Temporary).

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 8329 with the information required therein, including— (i) The name, address, and TIN of the issuer of... bonds with respect to that mortgage credit certificate was made, (iii) The name, address, and TIN of the...) The name, address, and TIN of each holder of a qualified mortgage credit certificate with respect to...

  9. 78 FR 69417 - Proposed Data Collections Submitted for Public Comment and Recommendations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-19

    ... days of this notice. Proposed Project An Investigation of Lung Health at an Indium-Tin Oxide Production... conduct a study regarding the lung health of workers at an indium-tin oxide production facility. Indium-tin oxide (ITO) is a sintered material used in the manufacture of devices such as liquid crystal...

  10. 40 CFR 471.15 - Pretreatment standards for new sources (PSNS).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-Tin-Bismuth Forming Subcategory § 471.15 Pretreatment standards for new sources (PSNS). Except as... standards for new sources. The mass of wastewater pollutants in lead-tin-bismuth forming process wastewater... million off-pounds) of lead-tin-bismuth rolled with emulsions Antimony 0.067 0.030 Lead 0.010 0.005 (b...

  11. 47 CFR 1.1706 - Content of filings.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Mexico. (f) Taxpayer Identification Number (TINs). All filers are required to provide their Taxpayer Identification Numbers (TINS) (as defined in 26 U.S.C. 6109) to the Commission, pursuant to the Debt Collection Improvement Act of 1996 (DCIA). Under the DCIA, the FCC may use an applicant or licensee's TIN for purposes of...

  12. 40 CFR 421.293 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Tin Subcategory § 421.293 Effluent limitations guidelines representing the degree of effluent... application of the best available technology economically achievable: (a) Tin smelter SO2 scrubber. BAT Limitations for the Secondary Tin Subcategory Pollutant or pollutant property Maximum for any 1 day Maximum...

  13. 76 FR 780 - Office of Special Education and Rehabilitative Services Overview Information; National Institute...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-06

    ... Numbering System (DUNS) number and a Taxpayer Identification Number (TIN); b. Register both your DUNS number and TIN with the Central Contractor Registry (CCR), the Government's primary registrant database; c. Provide your DUNS number and TIN on your application; and d. Maintain an active CCR registration with...

  14. 40 CFR 421.292 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... CATEGORY Secondary Tin Subcategory § 421.292 Effluent limitations guidelines representing the degree of... attainable by the application of the best practicable technology currently available: (a) Tin smelter SO2 scrubber. BPT Limitations for the Secondary Tin Subcategory Pollutant or pollutant property Maximum for any...

  15. 40 CFR 421.293 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Tin Subcategory § 421.293 Effluent limitations guidelines representing the degree of effluent... application of the best available technology economically achievable: (a) Tin smelter SO2 scrubber. BAT Limitations for the Secondary Tin Subcategory Pollutant or pollutant property Maximum for any 1 day Maximum...

  16. 78 FR 29344 - Applications for New Awards; National Institute on Disability and Rehabilitation Research...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-20

    ... Data Universal Numbering System (DUNS) number and a Taxpayer Identification Number (TIN); b. Register both your DUNS number and TIN with the Central Contractor Registry (CCR)--and, after July 24, 2012... your DUNS number and TIN on your application; and d. Maintain an active CRR or SAM registration with...

  17. 77 FR 72321 - Agency Information Collection Activities: Proposed Collection; Comment Request; Supplemental Form...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-05

    ...), requires Federal agencies to include the taxpayer identifying number (TIN) of all persons or organizations... entities doing business with USDA to furnish a TIN. The purpose of the Supplemental Form for Collecting Taxpayer Identifying Numbers is to comply with Federal law by enabling the Agency to legally obtain a TIN...

  18. 47 CFR 1.1706 - Content of filings.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Mexico. (f) Taxpayer Identification Number (TINs). All filers are required to provide their Taxpayer Identification Numbers (TINS) (as defined in 26 U.S.C. 6109) to the Commission, pursuant to the Debt Collection Improvement Act of 1996 (DCIA). Under the DCIA, the FCC may use an applicant or licensee's TIN for purposes of...

  19. Silicon-tin oxynitride glassy composition and use as anode for lithium-ion battery

    DOEpatents

    Neudecker, Bernd J.; Bates, John B.

    2001-01-01

    Disclosed are silicon-tin oxynitride glassy compositions which are especially useful in the construction of anode material for thin-film electrochemical devices including rechargeable lithium-ion batteries, electrochromic mirrors, electrochromic windows, and actuators. Additional applications of silicon-tin oxynitride glassy compositions include optical fibers and optical waveguides.

  20. Influence of TiN coating on the biocompatibility of medical NiTi alloy.

    PubMed

    Jin, Shi; Zhang, Yang; Wang, Qiang; Zhang, Dan; Zhang, Song

    2013-01-01

    The biocompatibility of TiN coated nickel-titanium shape memory alloy (NiTi-SMA) was evaluated to compare with that of the uncoated NiTi-SMA. Based on the orthodontic clinical application, the surface properties and biocompatibility were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), wettability test, mechanical test and in vitro tests including MTT, cell apoptosis and cell adhesion tests. It was observed that the bonding between the substrate and TiN coating is excellent. The roughness and wettability increased as for the TiN coating compared with the uncoated NiTi-SMA. MTT test showed no significant difference between the coated and uncoated NiTi-SMA, however the percentage of early cell apoptosis was significantly higher as for the uncoated NiTi alloy. SEM results showed that TiN coating could enhance the cell attachment, spreading and proliferation on NiTi-SMA. The results indicated that TiN coating bonded with the substrate well and could lead to a better biocompatibility. Copyright © 2012 Elsevier B.V. All rights reserved.

  1. DEM Based Modeling: Grid or TIN? The Answer Depends

    NASA Astrophysics Data System (ADS)

    Ogden, F. L.; Moreno, H. A.

    2015-12-01

    The availability of petascale supercomputing power has enabled process-based hydrological simulations on large watersheds and two-way coupling with mesoscale atmospheric models. Of course with increasing watershed scale come corresponding increases in watershed complexity, including wide ranging water management infrastructure and objectives, and ever increasing demands for forcing data. Simulations of large watersheds using grid-based models apply a fixed resolution over the entire watershed. In large watersheds, this means an enormous number of grids, or coarsening of the grid resolution to reduce memory requirements. One alternative to grid-based methods is the triangular irregular network (TIN) approach. TINs provide the flexibility of variable resolution, which allows optimization of computational resources by providing high resolution where necessary and low resolution elsewhere. TINs also increase required effort in model setup, parameter estimation, and coupling with forcing data which are often gridded. This presentation discusses the costs and benefits of the use of TINs compared to grid-based methods, in the context of large watershed simulations within the traditional gridded WRF-HYDRO framework and the new TIN-based ADHydro high performance computing watershed simulator.

  2. Release Path Temperatures of Shock-Compressed Tin from Dynamic Reflectance and Radiance Measurements

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    La Lone, B. M.; Stevens, G. D.; Turley, W. D.

    2013-08-01

    Dynamic reflectance and radiance measurements were conducted for tin samples shock compressed to 35 GPa and released to 15 GPa using high explosives. We determined the reflectance of the tin samples glued to lithium fluoride windows using an integrating sphere with an internal xenon flashlamp as an illumination source. The dynamic reflectance (R) was determined at near normal incidence in four spectral bands with coverage in visible and near-infrared spectra. Uncertainties in R/R0 are < 2%, and uncertainties in absolute reflectance are < 5%. In complementary experiments, thermal radiance from the tin/glue/lithium fluoride interface was recorded with similar shock stressmore » and spectral coverage as the reflectance measurements. The two sets of experiments were combined to obtain the temperature history of the tin surface with an uncertainty of < 2%. The stress at the interface was determined from photonic Doppler velocimetry and combined with the temperatures to obtain temperature-stress release paths for tin. We discuss the relationship between the experimental release paths and release isentropes that begin on the principal shock Hugoniot.« less

  3. ITO-TiN-ITO Sandwiches for Near-Infrared Plasmonic Materials.

    PubMed

    Chen, Chaonan; Wang, Zhewei; Wu, Ke; Chong, Haining; Xu, Zemin; Ye, Hui

    2018-05-02

    Indium tin oxide (ITO)-based sandwich structures with the insertion of ultrathin (<10 nm) titanium nitride (TiN) are investigated as near-infrared (NIR) plasmonic materials. The structural, electrical, and optical properties reveal the improvement of the sandwich structures stemmed from TiN insertion. TiN is a well-established alternative to noble metals such as gold, elevating the electron conductivity of sandwich structures as its thickness increases. Dielectric permittivities of TiN and top ITO layers show TiN-thickness-dependent properties, which lead to moderate and tunable effective permittivities for the sandwiches. The surface plasmon polaritons (SPP) of the ITO-TiN-ITO sandwich at the telecommunication window (1480-1570 nm) are activated by prism coupling using Kretschmann configuration. Compared with pure ITO films or sandwiches with metal insertion, the reflectivity dip for sandwiches with TiN is relatively deeper and wider, indicating the enhanced coupling ability in plasmonic materials for telecommunications. The SPP spatial profile, penetration depth, and degree of confinement, as well as the quality factors, demonstrate the applicability of such sandwiches for NIR plasmonic materials in various devices.

  4. Determination of the solubility of tin indium oxide using in situ and ex x-ray diffraction

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gonzalez, G. B.; Mason, T. O.; Okasinski, J. S.

    A novel approach to determine the thermodynamic solubility of tin in indium oxide via the exsolution from tin overdoped nano-ITO powders is presented. High-energy, in situ and ex situ synchrotron X-ray diffraction was utilized to study the solubility limit at temperatures ranging from 900 C to 1375 C. The tin exsolution from overdoped nanopowders and the formation of In{sub 4}Sn{sub 3}O{sub 12} were observed in situ during the first 4-48 h of high-temperature treatment. Samples annealed between 900 C and 1175 C were also studied ex situ with heat treatments for up to 2060 h. Structural results obtained from Rietveldmore » analysis include compositional phase analysis, atomic positions, and lattice parameters. The tin solubility in In{sub 2}O{sub 3} was determined using the phase analysis compositions from X-ray diffraction and the elemental compositions obtained from X-ray fluorescence. Experimental complications that can lead to incorrect tin solubility values in the literature are discussed.« less

  5. The influence of temperature and humidity on printed wiring board surface finishes: Immersion tin vs organic azoles

    NASA Astrophysics Data System (ADS)

    Ray, U.; Artaki, I.; Gordon, H. M.; Vianco, P. T.

    1994-08-01

    Substitution of lead-free solders in electronic assemblies requires changes in the conventional Sn:Pb finishes on substrates and component leads to prevent contamination of the candidate lead-free solder. Options for solderability preservative coatings on the printed wiring board include organic (azole or rosin/resin based) films and tin-based plated metallic coatings. This paper compares the solderability performance and corrosion protection effectiveness of electroless tin coatings vs organic azole films after exposure to a series of humidity and thermal cycling conditions. The solderability of immersion tin is directly related to the tin oxide growth on the surface and is not affected by the formation of SnCu intermetallic phases as long as the intermetallic phase is underneath a protective Sn layer. Thin azole films decompose upon heating in the presence of oxygen and lead to solderability degradation. Evaluations of lead-free solder pastes for surface mount assembly applications indicate that immersion tin significantly improves the spreading of Sn:Ag and Sn:Bi alloys as compared to azole surface finishes.

  6. Large-format platinum silicide microwave kinetic inductance detectors for optical to near-IR astronomy.

    PubMed

    Szypryt, P; Meeker, S R; Coiffard, G; Fruitwala, N; Bumble, B; Ulbricht, G; Walter, A B; Daal, M; Bockstiegel, C; Collura, G; Zobrist, N; Lipartito, I; Mazin, B A

    2017-10-16

    We have fabricated and characterized 10,000 and 20,440 pixel Microwave Kinetic Inductance Detector (MKID) arrays for the Dark-speckle Near-IR Energy-resolved Superconducting Spectrophotometer (DARKNESS) and the MKID Exoplanet Camera (MEC). These instruments are designed to sit behind adaptive optics systems with the goal of directly imaging exoplanets in a 800-1400 nm band. Previous large optical and near-IR MKID arrays were fabricated using substoichiometric titanium nitride (TiN) on a silicon substrate. These arrays, however, suffered from severe non-uniformities in the TiN critical temperature, causing resonances to shift away from their designed values and lowering usable detector yield. We have begun fabricating DARKNESS and MEC arrays using platinum silicide (PtSi) on sapphire instead of TiN. Not only do these arrays have much higher uniformity than the TiN arrays, resulting in higher pixel yields, they have demonstrated better spectral resolution than TiN MKIDs of similar design. PtSi MKIDs also do not display the hot pixel effects seen when illuminating TiN on silicon MKIDs with photons with wavelengths shorter than 1 µm.

  7. Process for making a noble metal on tin oxide catalyst

    NASA Technical Reports Server (NTRS)

    Upchurch, Billy T. (Inventor); Davis, Patricia (Inventor); Miller, Irvin M. (Inventor)

    1989-01-01

    A quantity of reagent grade tin metal or compound, chloride-free, and high-surface-area silica spheres are placed in deionized water, followed by deaerating the mixture by boiling and adding an oxidizing agent, such as nitric acid. The nitric acid oxidizes the tin to metastannic acid which coats the spheres because the acid is absorbed on the substrate. The metastannic acid becomes tin oxide upon drying and calcining. The tin-oxide coated silica spheres are then placed in water and boiled. A chloride-free precious metal compound in aqueous solution is then added to the mixture containing the spheres, and the precious metal compound is reduced to a precious metal by use of a suitable reducing agent such as formic acid. Very beneficial results were obtained using the precious metal compound tetraammine platinum(II) hydroxide.

  8. A-15 Superconducting composite wires and a method for making

    DOEpatents

    Suenaga, Masaki; Klamut, Carl J.; Luhman, Thomas S.

    1984-01-01

    A method for fabricating superconducting wires wherein a billet of copper containing filaments of niobium or vanadium is rolled to form a strip which is wrapped about a tin-alloy core to form a composite. The alloy is a tin-copper alloy for niobium filaments and a gallium-copper alloy for vanadium filaments. The composite is then drawn down to a desired wire size and heat treated. During the heat treatment process, the tin in the bronze reacts with the niobium to form the superconductor niobium tin. In the case where vanadium is used, the gallium in the gallium bronze reacts with the vanadium to form the superconductor vanadium gallium. This new process eliminates the costly annealing steps, external tin plating and drilling of bronze ingots required in a number of prior art processes.

  9. Wrapping process for fabrication of A-15 superconducting composite wires

    DOEpatents

    Suenaga, M.; Klamut, C.J.; Luhman, T.S.

    1980-08-15

    A method for fabricating superconducting wires wherein a billet of copper containing filaments of niobium or vanadium is rolled to form a strip which is wrapped about a tin-alloy core to form a composite. The alloy is a tin-copper alloy for niobium filaments and a gallium-copper alloy for vanadium filaments. The composite is then drawn down to a desired wire size and heat treated. During the heat treatment process, the tin in the bronze reacts with the niobium to form the superconductor niobium tin. In the case where vanadium is used, the gallium in the gallium bronze reacts with the vanadium to form the superconductor vanadium gallium. This new process eliminates the costly annealing steps, external tin plating and drilling of bronze ingots required in a number of prior art processes.

  10. Effect of Sn on the oxide subscale structure formed on a 3% Si steel

    NASA Astrophysics Data System (ADS)

    Cesar, Maria das G. M. M.; Silveira, Carolina C.; Paolinelli, Sebastião C.; Cicale, Stefano

    2018-04-01

    Addition of tin in 3% Si steel is a method to improve magnetic properties since tin in steel is known as an element that segregates at grain boundaries, inhibits grain growth and has a dragging effect on grain boundary movement. However, tin is generally known as an element that has a harmful effect on surface coating properties. The oxide subscale formed on the decarburization annealing of a 3% Si steel containing tin was investigated by SEM, EDS, GDS and FTIR. The forsterite film was evaluated by SEM, EDS and GDS. The higher tin content decreased thickness, oxygen and fayalite/silica ratio in the subscale and resulted into a discontinuous forsterite film with poor oxidation resistance. After secondary coating the samples presented a reddish color due to the formation of iron oxide and poor dielectric property.

  11. Synthesis of tin-containing polyimide films

    NASA Technical Reports Server (NTRS)

    Ezzell, S. A.; Taylor, L. T.

    1984-01-01

    A series of tin-containing polyimide films derived from either 3,3',4,4'-benzophenone tetracarboxylic acid dianhydride or pyromellitic dianhydride and 4,4'-oxydianiline have been synthesized and their electrical properties examined. Highest quality materials (i.e., homogeneous, smooth surface, flexible) with the best electrical properties were doped with either SnCl2.2H2O or (n-Bu)2SnCl2. In all cases, extensive reactivity of the tin dopant with water, air or polyamic acid during imidization is observed. Lowered electrical surface resistivities appear to be correlatable with the presence of surface tin oxide on the film surface.

  12. Temperature and pressure determination of the tin melt boundary from a combination of pyrometry, spectral reflectance, and velocity measurements along release paths

    NASA Astrophysics Data System (ADS)

    La Lone, Brandon; Asimow, Paul; Fatyanov, Oleg; Hixson, Robert; Stevens, Gerald

    2017-06-01

    Plate impact experiments were conducted on tin samples backed by LiF windows to determine the tin melt curve. Thin copper flyers were used so that a release wave followed the 30-40 GPa shock wave in the tin. The release wave at the tin-LiF interface was about 300 ns long. Two sets of experiments were conducted. In one set, spectral emissivity was measured at six wavelengths using a flashlamp illuminated integrating sphere. In the other set, thermal radiance was measured at two wavelengths. The emissivity and thermal radiance measurements were combined to obtain temperature histories of the tin-LiF interface during the release. PDV was used to obtain stress histories. All measurements were combined to obtain temperature vs. stress release paths. A kink or steepening in the release paths indicate where the releases merge onto the melt boundary, and release paths originating from different shock stresses overlap on the melt boundary. Our temperature-stress release path measurements provide a continuous segment of the tin melt boundary that is in good agreement with some of the published melt curves. This work was done by National Security Technologies, LLC, under Contract No. DE-AC52-06NA25946 with the U.S. Department of Energy, and supported by the Site-Directed Research and Development Program. DOE/NV/259463133.

  13. On Defect Cluster Aggregation and Non-Reducibilty in Tin-Doped Indium Oxide

    NASA Astrophysics Data System (ADS)

    Warschkow, Oliver; Ellis, Donald E.; Gonzalez, Gabriela; Mason, Thomas O.

    2003-03-01

    The conductivity of tin-doped indium oxide (ITO), a transparent conductor, is critically dependent on the amount of tin-doping and oxygen partial pressure during preparation and annealing. Frank and Kostlin (Appl. Phys. A 27 (1982) 197-206) rationalized the carrier concentration dependence by postulating the formation of two types of neutral defect clusters at medium tin-doping levels: "Reducible" and "non-reducible" defect clusters; so named to indicate their ability to create carriers under reduction. According to Frank and Kostlin, both are composed of a single oxygen interstitial and two tin atoms substituting for indium, positioned in non-nearest and nearest coordination, respectively. This present work, seeking to distinguish reducible and non-reducible clusters by use of an atomistic model, finds only a weak correlation of oxygen interstitial binding energies with the relative positioning of dopants. Instead, the number of tin-dopants in the vicinity of the interstitial has a much larger effect on how strongly it is bound, a simple consequence of Coulomb interactions. We postulate that oxygen interstitials become non-reducible when clustered with three or more Sn_In. This occurs at higher doping levels as reducible clusters aggregate and share tin atoms. A simple probabilistic model, estimating the average number of clusters so aggregated, provides a qualitatively correct description of the carrier density in reduced ITO as a function of Sn doping level.

  14. Hierarchical TiN nanoparticles-assembled nanopillars for flexible supercapacitors with high volumetric capacitance.

    PubMed

    Qin, Ping; Li, Xingxing; Gao, Biao; Fu, Jijiang; Xia, Lu; Zhang, Xuming; Huo, Kaifu; Shen, Wenli; Chu, Paul K

    2018-05-10

    Titanium nitride (TiN) is an attractive electrode material in fast charging/discharging supercapacitors because of its excellent conductivity. However, the low capacitance and mechanical brittleness of TiN restricts its further application in flexible supercapacitors with high energy density. Thus, it is still a challenge to rationally design TiN electrodes with both high electrochemical and mechanical properties. Herein, the hierarchical TiN nanoparticles-assembled nanopillars (H-TiN NPs) array as binder free electrodes were obtained by nitriding of hierarchical titanium dioxide (TiO2) nanopillars, which was produced by a simple hydrothermal treatment of anodic TiO2 nanotubes (NTs) array in water. The porous TiN nanoparticles connected to each other to form ordered nanopillar arrays, effectively providing larger specific surface area and more active sites for charge storage. The H-TiN NPs delivered a high volumetric capacitance of 120 F cm-3 at 0.83 A cm-3, which is better than that of TiN NTs arrays (69 F cm-3 at 0.83 A cm-3). After assembling into all-solid-state devices, the H-TiN NPs based supercapacitors exhibited outstanding volumetric capacitance of 5.9 F cm-3 at 0.02 A cm-3 and a high energy density of 0.53 mW h cm-3. Our results reveal a new strategy to optimize the supercapacitive performance of metal nitrides.

  15. 26 CFR 301.6723-1 - Failure to comply with other information reporting requirements.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... that a person— (A) Include his or her taxpayer identification number (“TIN”) on any return, statement... another person the TIN of such person, or (C) Furnish his or her TIN to another person; (iii) Any requirement contained in the regulations under section 215 that a person— (A) Furnish his or her TIN to...

  16. 26 CFR 301.6723-1 - Failure to comply with other information reporting requirements.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... that a person— (A) Include his or her taxpayer identification number (“TIN”) on any return, statement... another person the TIN of such person, or (C) Furnish his or her TIN to another person; (iii) Any requirement contained in the regulations under section 215 that a person— (A) Furnish his or her TIN to...

  17. 78 FR 6083 - Application for New Awards; Indian Education Formula Grants to Local Educational Agencies

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-29

    ... Universal Numbering System (DUNS) number and a Taxpayer Identification Number (TIN); b. Register both your DUNS number and TIN with the Central Contractor Registry (CCR)--and, after July 24, 2012, with the... number and TIN on your application; and d. Maintain an active CCR or SAM registration with current...

  18. 26 CFR 301.6723-1 - Failure to comply with other information reporting requirements.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... that a person— (A) Include his or her taxpayer identification number (“TIN”) on any return, statement... another person the TIN of such person, or (C) Furnish his or her TIN to another person; (iii) Any requirement contained in the regulations under section 215 that a person— (A) Furnish his or her TIN to...

  19. 76 FR 81441 - Proposed Significant New Use Rules on Certain Chemical Substances

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-28

    ... 5(a)(2) of the Toxic Substances Control Act (TSCA) for the chemical substances rutile, tin zinc, calcium-doped (CAS No. 389623-01- 2) and rutile, tin zinc, sodium-doped (CAS No. 389623-07-8) which were... two chemical substances are identified as rutile, tin zinc, calcium-doped (PMN P-06-36; CAS No. 389623...

  20. Cornish Tin Mining and Smelting

    ERIC Educational Resources Information Center

    Gardner, Rebecca

    2010-01-01

    In this article, the author describes how Cornwall was once the world's leading producer of tin. Cornwall's industrial past is now a World Heritage Site alongside the Grand Canyon or the Great Wall of China. A hint is in the Cornish flag, a simple white cross against a black background, also known as Saint Piran's flag. At Geevor Tin Mine, one of…

  1. 78 FR 27476 - Pirelli Tire LLC, Grant of Petition for Decision of Inconsequential Noncompliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-10

    ... complete or partial tire identification number (TIN) on the inner tire sidewall as required by paragraphs... being modified or have been modified to ensure that the appropriate TIN information is contained on both... visibility of the full TIN on the outboard sidewall: Pirelli's internal policy allows dealers to sell these...

  2. 26 CFR 301.6723-1 - Failure to comply with other information reporting requirements.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... that a person— (A) Include his or her taxpayer identification number (“TIN”) on any return, statement... another person the TIN of such person, or (C) Furnish his or her TIN to another person; (iii) Any requirement contained in the regulations under section 215 that a person— (A) Furnish his or her TIN to...

  3. 42 CFR 425.504 - Incorporating reporting requirements related to the Physician Quality Reporting System Incentive...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... within an ACO may only participate under their ACO participant TIN as a group practice under the... Reporting System incentive payment, each ACO participant TIN, on behalf of its ACO supplier/provider... available, based on the allowed charges under the Physician Fee Schedule for that TIN. (4) ACO participant...

  4. 75 FR 28319 - Yokohama Tire Corporation, Receipt of Petition for Decision of Inconsequential Noncompliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-20

    ... tires include the full Tire Identification Number (TIN) on one sidewall but omits the partial serial... failure incidents. The TIN becomes important in the event of a safety campaign and enables the owners to... with the current FMVSS No. 139 sidewall marking regulation that requires a full TIN on the sidewall and...

  5. 26 CFR 1.671-4 - Method of reporting.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... either— (A) Furnish the name and taxpayer identification number (TIN) of the grantor or other person...) Furnish the name, TIN, and address of the trust to all payors during the taxable year, and comply with the... the trustee when name and TIN of the grantor or other person treated as the owner of the trust and the...

  6. 26 CFR 301.6723-1 - Failure to comply with other information reporting requirements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... that a person— (A) Include his or her taxpayer identification number (“TIN”) on any return, statement... another person the TIN of such person, or (C) Furnish his or her TIN to another person; (iii) Any requirement contained in the regulations under section 215 that a person— (A) Furnish his or her TIN to...

  7. 26 CFR 1.671-4 - Method of reporting.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... paragraph (b) must either— (A) Furnish the name and taxpayer identification number (TIN) of the grantor or... section; or (B) Furnish the name, TIN, and address of the trust to all payors during the taxable year, and...) Additional obligations of the trustee when name and TIN of the grantor or other person treated as the owner...

  8. 76 FR 77013 - Tin- and Chromium-Coated Steel Sheet From Japan; Scheduling of a Full Five-Year Review Concerning...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-09

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 731-TA-860 (Second Review)] Tin- and Chromium-Coated Steel Sheet From Japan; Scheduling of a Full Five-Year Review Concerning the Antidumping Duty... order on tin- and chromium-coated steel sheet from Japan would be likely to lead to continuation or...

  9. Well-isolated FePt grains with high coercivity on TiN underlayers for heat-assisted magnetic recording media

    NASA Astrophysics Data System (ADS)

    Santos, Tiffany; Jain, Shikha; Hirotsune, Akemi; Hellwig, Olav

    2015-03-01

    MgO is the underlayer material of choice for granular FePt thin film media for heat assisted magnetic recording, because MgO (001) seeds L10-ordered FePt with c-axis perpendicular to the film plane and high perpendicular magnetic anisotropy. MgO is also an effective diffusion barrier between the FePt grains and the metallic underlayers beneath the MgO. However, there are possible concerns associated with using MgO in the media structure. MgO is highly sensitive to moisture, and hydration of MgO could potentially degrade film properties. In addition, many particulates are incorporated into the film during the RF-sputter process, which can be sources of delamination, pinholes and damage to the low-flying recording heads. TiN is an attractive alternative to MgO because it is chemically and mechanically robust, and TiN can be DC-sputtered, which produces fewer particles and has a faster deposition rate. Even though TiN has the same rocksalt crystal structure and lattice constant as MgO, the higher surface energy of TiN causes more wetting of the FePt grains on the TiN surface. As a result, deposition of granular FePt on TiN most often produces inter-connected, worm-like grains with low coercivity. We will show that by optimizing the deposition of FePt and segregant material on the TiN underlayer, we are able to fabricate FePt media with well-isolated grains and high coercivity reaching nearly 4 Tesla. In addition, the FePt has excellent structural properties with a high degree of L10 atomic ordering and minimal c-axis in-plane oriented grains.

  10. Using X-ray Microscopy To Understand How Nanoporous Materials Can Be Used To Reduce the Large Volume Change in Alloy Anodes

    DOE PAGES

    Cook, John B.; Lin, Terri C.; Detsi, Eric; ...

    2017-01-05

    Tin metal is an attractive negative electrode material to replace graphite in Li-ion batteries due to its high energy density. However, tin undergoes a large volume change upon alloying with Li, which pulverizes the particles, and ultimately leads to short cycling lifetimes. Nevertheless, nanoporous materials have been shown to extend battery life well past what is observed in nonporous material. Despite the exciting potential of porous alloying anodes to significantly increase the energy density in Li-ion batteries, the fundamental physics of how nanoscale architectures accommodate the electrochemically induced volume changes are poorly understood. Here, operando transmission X-ray microscopy has beenmore » used to develop an understanding of the mechanisms that govern the enhanced cycling stability in nanoporous tin. We found that in comparison to dense tin, nanoporous tin undergoes a 6-fold smaller areal expansion after lithiation, as a result of the internal porosity and unique nanoscale architecture. The expansion is also more gradual in nanoporous tin compared to the dense material. The nanoscale resolution of the microscope used in this study is ~30 nm, which allowed us to directly observe the pore structure during lithiation and delithiation. We found that nanoporous tin remains porous during the first insertion and desinsertion cycle. This observation is key, as fully closed pores could lead to mechanical instability, electrolyte inaccessibility, and short lifetimes. Here, while tin was chosen for this study because of its high X-ray contrast, the results of this work should be general to other alloy-type systems, such as Si, that also suffer from volume change based cycling degradation.« less

  11. Linking phenology and biomass productivity in South Dakota mixed-grass prairie

    USGS Publications Warehouse

    Rigge, Matthew; Smart, Alexander; Wylie, Bruce; Gilmanov, Tagir; Johnson, Patricia

    2013-01-01

    Assessing the health of rangeland ecosystems based solely on annual biomass production does not fully describe plant community condition; the phenology of production can provide inferences on species composition, successional stage, and grazing impacts. We evaluate the productivity and phenology of western South Dakota mixed-grass prairie using 2000 to 2008 Moderate Resolution Imaging Spectrometer (MODIS) normalized difference vegetation index (NDVI) satellite imagery at 250 m spatial resolution. Growing season NDVI images were integrated weekly to produce time-integrated NDVI (TIN), a proxy of total annual biomass production, and integrated seasonally to represent annual production by cool (C3) and warm (C4) season species. Additionally, a variety of phenological indicators including cool season percentage of TIN were derived from the seasonal profiles of NDVI. Cool season percentage and TIN were combined to generate vegetation classes, which served as proxies of plant community condition. TIN decreased with precipitation from east to west across the study area. Alternatively, cool season percentage increased from east to west, following patterns related to the reliability (interannual coefficient of variation [CV]) and quantity of mid-summer precipitation. Cool season TIN averaged 76.8% of total. Seasonal accumulation of TIN corresponded closely (R2 > 0.90) to that of gross photosynthesis data from a carbon flux tower. Field-collected biomass and community composition data were strongly related to the TIN and cool season percentage products. The patterns of vegetation classes were responsive to topographic, edaphic, and land management influences on plant communities. Accurate maps of biomass production, cool/warm season composition, and vegetation classes can improve the efficiency of land management by adjusting stocking rates and season of use to maximize rangeland productivity and achieve conservation objectives. Further, our results clarify the spatial and temporal dynamics of phenology and TIN in mixed-grass prairie.

  12. Using X-ray Microscopy To Understand How Nanoporous Materials Can Be Used To Reduce the Large Volume Change in Alloy Anodes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cook, John B.; Lin, Terri C.; Detsi, Eric

    Tin metal is an attractive negative electrode material to replace graphite in Li-ion batteries due to its high energy density. However, tin undergoes a large volume change upon alloying with Li, which pulverizes the particles, and ultimately leads to short cycling lifetimes. Nevertheless, nanoporous materials have been shown to extend battery life well past what is observed in nonporous material. Despite the exciting potential of porous alloying anodes to significantly increase the energy density in Li-ion batteries, the fundamental physics of how nanoscale architectures accommodate the electrochemically induced volume changes are poorly understood. Here, operando transmission X-ray microscopy has beenmore » used to develop an understanding of the mechanisms that govern the enhanced cycling stability in nanoporous tin. We found that in comparison to dense tin, nanoporous tin undergoes a 6-fold smaller areal expansion after lithiation, as a result of the internal porosity and unique nanoscale architecture. The expansion is also more gradual in nanoporous tin compared to the dense material. The nanoscale resolution of the microscope used in this study is ~30 nm, which allowed us to directly observe the pore structure during lithiation and delithiation. We found that nanoporous tin remains porous during the first insertion and desinsertion cycle. This observation is key, as fully closed pores could lead to mechanical instability, electrolyte inaccessibility, and short lifetimes. Here, while tin was chosen for this study because of its high X-ray contrast, the results of this work should be general to other alloy-type systems, such as Si, that also suffer from volume change based cycling degradation.« less

  13. Evaluating total inorganic nitrogen in coastal waters through fusion of multi-temporal RADARSAT-2 and optical imagery using random forest algorithm

    NASA Astrophysics Data System (ADS)

    Liu, Meiling; Liu, Xiangnan; Li, Jin; Ding, Chao; Jiang, Jiale

    2014-12-01

    Satellites routinely provide frequent, large-scale, near-surface views of many oceanographic variables pertinent to plankton ecology. However, the nutrient fertility of water can be challenging to detect accurately using remote sensing technology. This research has explored an approach to estimate the nutrient fertility in coastal waters through the fusion of synthetic aperture radar (SAR) images and optical images using the random forest (RF) algorithm. The estimation of total inorganic nitrogen (TIN) in the Hong Kong Sea, China, was used as a case study. In March of 2009 and May and August of 2010, a sequence of multi-temporal in situ data and CCD images from China's HJ-1 satellite and RADARSAT-2 images were acquired. Four sensitive parameters were selected as input variables to evaluate TIN: single-band reflectance, a normalized difference spectral index (NDSI) and HV and VH polarizations. The RF algorithm was used to merge the different input variables from the SAR and optical imagery to generate a new dataset (i.e., the TIN outputs). The results showed the temporal-spatial distribution of TIN. The TIN values decreased from coastal waters to the open water areas, and TIN values in the northeast area were higher than those found in the southwest region of the study area. The maximum TIN values occurred in May. Additionally, the estimation accuracy for estimating TIN was significantly improved when the SAR and optical data were used in combination rather than a single data type alone. This study suggests that this method of estimating nutrient fertility in coastal waters by effectively fusing data from multiple sensors is very promising.

  14. Determination of the liquidus temperature of tin using the heat pulse-based melting and comparison with traditional methods

    NASA Astrophysics Data System (ADS)

    Joung, Wukchul; Park, Jihye; Pearce, Jonathan V.

    2018-06-01

    In this work, the liquidus temperature of tin was determined by melting the sample using the pressure-controlled loop heat pipe. Square wave-type pressure steps generated periodic 0.7 °C temperature steps in the isothermal region in the vicinity of the tin sample, and the tin was melted with controllable heat pulses from the generated temperature changes. The melting temperatures at specific melted fractions were measured, and they were extrapolated to the melted fraction of unity to determine the liquidus temperature of tin. To investigate the influence of the impurity distribution on the melting behavior, a molten tin sample was solidified by an outward slow freezing or by quenching to segregate the impurities inside the sample with concentrations increasing outwards or to spread the impurities uniformly, respectively. The measured melting temperatures followed the local solidus temperature variations well in the case of the segregated sample and stayed near the solidus temperature in the quenched sample due to the microscopic melting behavior. The extrapolated melting temperatures of the segregated and quenched samples were 0.95 mK and 0.49 mK higher than the outside-nucleated freezing temperature of tin (with uncertainties of 0.15 mK and 0.16 mK, at approximately 95% level of confidence), respectively. The extrapolated melting temperature of the segregated sample was supposed to be a closer approximation to the liquidus temperature of tin, whereas the quenched sample yielded the possibility of a misleading extrapolation to the solidus temperature. Therefore, the determination of the liquidus temperature could result in different extrapolated melting temperatures depending on the way the impurities were distributed within the sample, which has implications for the contemporary methodology for realizing temperature fixed points of the International Temperature Scale of 1990 (ITS-90).

  15. Method of preparing composite superconducting wire

    DOEpatents

    Verhoeven, John D.; Gibson, Edwin D.; Finnemore, Douglas K.; Ostenson, Jerome E.; Schmidt, Frederick A.; Owen, Charles V.

    1985-08-06

    An improved method of preparing composite multifilament superconducting wire of Nb.sub.3 Sn in a copper matrix which eliminates the necessity of coating the drawn wire with tin. A generalized cylindrical billet of an alloy of copper containing at least 15 weight percent niobium, present in the copper as discrete, randomly distributed and oriented dendritic-shaped particles, is provided with at least one longitudinal opening which is filled with tin to form a composite drawing rod. The drawing rod is then drawn to form a ductile composite multifilament wire containing a filament of tin. The ductile wire containing the tin can then be wound into magnet coils or other devices before heating to diffuse the tin through the wire to react with the niobium forming Nb.sub.3 Sn. Also described is an improved method for making large billets of the copper-niobium alloy by consumable-arc casting.

  16. Stabilized TiN nanowire arrays for high-performance and flexible supercapacitors.

    PubMed

    Lu, Xihong; Wang, Gongming; Zhai, Teng; Yu, Minghao; Xie, Shilei; Ling, Yichuan; Liang, Chaolun; Tong, Yexiang; Li, Yat

    2012-10-10

    Metal nitrides have received increasing attention as electrode materials for high-performance supercapacitors (SCs). However, most of them are suffered from poor cycling stability. Here we use TiN as an example to elucidate the mechanism causing the capacitance loss. X-ray photoelectron spectroscopy analyses revealed that the instability is due to the irreversible electrochemical oxidation of TiN during the charging/discharging process. Significantly, we demonstrate for the first time that TiN can be stabilized without sacrificing its electrochemical performance by using poly(vinyl alcohol) (PVA)/KOH gel as the electrolyte. The polymer electrolyte suppresses the oxidation reaction on electrode surface. Electrochemical studies showed that the TiN solid-state SCs exhibit extraordinary stability up to 15,000 cycles and achieved a high volumetric energy density of 0.05 mWh/cm(3). The capability of effectively stabilizing nitride materials could open up new opportunities in developing high-performance and flexible SCs.

  17. Influence of Deposition Conditions on Fatigue Properties of Martensitic Stainless Steel with Tin Film Coated by Arc Ion Plating Method

    NASA Astrophysics Data System (ADS)

    Fukui, Satoshi; Yonekura, Daisuke; Murakami, Ri-Ichi

    The surface properties like roughness etc. strongly influence the fatigue strength of high-tensile steel. To investigate the effect of surface condition and TiN coating on the fatigue strength of high-strength steel, four-point bending fatigue tests were carried out for martensitic stainless steel with TiN film coated using arc ion plating (AIP) method. This study, using samples that had been polished under several size of grind particle, examines the influence of pre-coating treatment on fatigue properties. A 2-µm-thick TiN film was deposited onto the substrate under three kinds of polishing condition. The difference of the hardness originated in the residual stress or thin deformation layer where the difference of the size of grinding particle of the surface polishing. And it leads the transformation of the interface of the substrate and the TiN film and improves fatigue limit.

  18. Substrate-insensitive atomic layer deposition of plasmonic titanium nitride films

    DOE PAGES

    Yu, Ing-Song; Cheng, Hsyi-En; Chang, Chun-Chieh; ...

    2017-02-06

    The plasmonic properties of titanium nitride (TiN) films depend on the type of substrate when using typical deposition methods such as sputtering. We show atomic layer deposition (ALD) of TiN films with very weak dependence of plasmonic properties on the substrate, which also suggests the prediction and evaluation of plasmonic performance of TiN nanostructures on arbitrary substrates under a given deposition condition. Our results also observe that substrates with more nitrogen-terminated (N-terminated) surfaces will have significant impact on the deposition rate as well as the film plasmonic properties. Furthermore, we illustrate that the plasmonic properties of ALD TiN films canmore » be tailored by simply adjusting the deposition and/or post-deposition annealing temperatures. These characteristics and the capability of conformal coating make ALD TiN films on templates ideal for applications that require the fabrication of complex 3D plasmonic nanostructures.« less

  19. Tin oxide nanosheet assembly for hydrophobic/hydrophilic coating and cancer sensing.

    PubMed

    Masuda, Yoshitake; Ohji, Tatsuki; Kato, Kazumi

    2012-03-01

    Tin oxide nanosheets were crystallized on transparent conductive oxide substrates of fluorine-doped tin oxide in aqueous solutions. The nanosheets had chemical ratio of Sn:O:F = 1:1.85:0.076, suggesting fluorine doping into SnO(2). They were hydrophobic surfaces with contact angle of 140°. They were converted to hydrophilic surfaces with contact angle of below 1° by light irradiation. The simple water process will be applied to surface coating of polymers, metals, biomaterials, papers, etc. Furthermore, the tin oxide nanosheets were modified with dye-labeled monoclonal antibody. Monoclonal antibody reacts with human alpha-fetoprotein in blood serum of hepatocellular cancer patient. Photoluminescence and photocurrent were obtained from the nanosheets under excitation light. Photoelectric conversion was an essence in the sensing system. The tin oxide nanosheets with dye-labeled prostate specific antigen will be used for electrodes of prostate cancer sensors. © 2012 American Chemical Society

  20. Control of the electrical resistivity of Ni-Cr wires using low pressure chemical vapor deposition of tin

    NASA Astrophysics Data System (ADS)

    Kim, Jun-Hyun; Bak, Jeong Geun; Lee, Kangtaek; Kim, Chang-Koo

    2018-01-01

    Control of the electrical resistivity of Ni-Cr wires is demonstrated using low pressure chemical vapor deposition (LPCVD) of tin on the surface of the wire, after which the effects of the deposition temperature on the structural, morphological, and compositional characteristics of the tin-deposited Ni-Cr wires are investigated. As the deposition temperature is increased, the resistivity of the Ni-Cr wires increases in the temperature range 300-400 °C; then remains nearly constant as the temperature increased to 700 °C. The increase in the resistivity of the Ni-Cr wires is attributed to formation of Ni3Sn2 particulates on the surface of the wire. Compositional analysis shows that the pattern of change in the tin content with the deposition temperature is similar to that of resistivity with temperature, implying that the atomic content of tin on Ni-Cr directly affects the electrical resistivity.

  1. Structural and electrical characteristics of gallium tin oxide thin films prepared by electron cyclotron resonance-metal organic chemical vapor deposition.

    PubMed

    Park, Ji Hun; Byun, Dongjin; Lee, Joong Kee

    2011-08-01

    Gallium tin oxide composite (GTO) thin films were prepared by electron cyclotron resonance-metal organic chemical vapor deposition (ECR-MOCVD). The organometallics of tetramethlytin and trimethylgallium were used for precursors of gallium and tin, respectively. X-ray diffraction (XRD) characterization indicated that the gallium tin oxide composite thin films show the nanopolycrystalline of tetragonal rutile structure. Hall measurement indicated that the Ga/[O+Sn] mole ratio play an important role to determine the electrical properties of gallium tin composite oxide thin films. n-type conducting film obtained Ga/[O+Sn] mole ratio of 0.05 exhibited the lowest electrical resistivity of 1.21 x 10(-3) ohms cm. In our experimental range, the optimized carrier concentration of 3.71 x 10(18) cm(-3) was prepared at the Ga/[O+Sn] mole ratio of 0.35.

  2. In vitro assessments on bacterial adhesion and corrosion performance of TiN coating on Ti6Al4V titanium alloy synthesized by multi-arc ion plating

    NASA Astrophysics Data System (ADS)

    Lin, Naiming; Huang, Xiaobo; Zhang, Xiangyu; Fan, Ailan; Qin, Lin; Tang, Bin

    2012-07-01

    TiN coating was synthesized on Ti6Al4V titanium alloy surface by multi-arc ion plating (MIP) technique. Surface morphology, cross sectional microstructure, elemental distributions and phase compositions of the obtained coating were analyzed by means of scanning electron microscope (SEM), optical microscope (OM), glow discharge optical emission spectroscope (GDOES) and X-ray diffraction (XRD). Bacterial adhesion and corrosion performance of Ti6Al4V and the TiN coating were assessed via in vitro bacterial adhesion tests and corrosion experiments, respectively. The results indicated that continuous and compact coating which was built up by pure TiN with a typical columnar crystal structure has reached a thickness of 1.5 μm. This TiN coating could significantly reduce the bacterial adhesion and enhance the corrosion resistance of Ti6Al4V substrate.

  3. Methods for chemical recovery of non-carrier-added radioactive tin from irradiated intermetallic Ti-Sb targets

    DOEpatents

    Lapshina, Elena V [Troitsk, RU; Zhuikov, Boris L [Troitsk, RU; Srivastava, Suresh C [Setauket, NY; Ermolaev, Stanislav V [Obninsk, RU; Togaeva, Natalia R [Obninsk, RU

    2012-01-17

    The invention provides a method of chemical recovery of no-carrier-added radioactive tin (NCA radiotin) from intermetallide TiSb irradiated with accelerated charged particles. An irradiated sample of TiSb can be dissolved in acidic solutions. Antimony can be removed from the solution by extraction with dibutyl ether. Titanium in the form of peroxide can be separated from tin using chromatography on strong anion-exchange resin. In another embodiment NCA radiotin can be separated from iodide solution containing titanium by extraction with benzene, toluene or chloroform. NCA radiotin can be finally purified from the remaining antimony and other impurities using chromatography on silica gel. NCA tin-117m can be obtained from this process. NCA tin-117m can be used for labeling organic compounds and biological objects to be applied in medicine for imaging and therapy of various diseases.

  4. Improved method of preparing composite superconducting wire

    DOEpatents

    Verhoeven, J.D.; Gibson, E.D.; Finnemore, D.K.; Ostenson, J.E.; Schmidt, F.A.; Owen, C.V.

    1979-10-17

    An improved method of preparing composite multifilament superconducting wire of Nb/sub 3/Sn in a copper matrix eliminates the necessity of coating the drawn wire with tin. A generalized cylindrical billet of an alloy of copper containing at least 15 weight percent niobium, present in the copper as discrete, randomly distributed and oriented dendritic-shaped particles, is provided with at least one longitudinal opening which is filled with tin to form a composite drawing rod. The drawing rod is then drawn to form a ductile composite multifilament wire containing a filament of tin. The ductile wire containing the tin can then be wound into magnet coils or other devices before heating to diffuse the tin through the wire to react with the niobium forming Nb/sub 3/Sn. Also described is an improved method for making large billets of the copper-niobium alloy by consumable-arc casting.

  5. 26 CFR 31.3406(g)-3 - Exemption while payee is waiting for a taxpayer identification number.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... days. If a payor has received an awaiting-TIN certificate from a payee with respect to an account or...-TIN certificate. The payor must withhold under section 3406 beginning after the 60-day exemption... required in § 31.3406(d)-1. Regardless of whether the payee provides an awaiting-TIN certificate to a payor...

  6. 26 CFR 31.3406(g)-3 - Exemption while payee is waiting for a taxpayer identification number.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... days. If a payor has received an awaiting-TIN certificate from a payee with respect to an account or...-TIN certificate. The payor must withhold under section 3406 beginning after the 60-day exemption... required in § 31.3406(d)-1. Regardless of whether the payee provides an awaiting-TIN certificate to a payor...

  7. 40 CFR 471.11 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... SOURCE CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.11 Effluent limitations representing the... lead-tin-bismuth rolled with emulsions Antimony 0.068 0.030 Lead 0.010 0.005 Oil and grease 0.468 0.281... mg/off-kg (pounds per million off-pound) of lead-tin-bismuth rolled with soap solutions Antimony 0...

  8. 10 CFR 30.72 - Schedule C-Quantities of radioactive materials requiring consideration of the need for an...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ...-127m .01 5,000 Tellurium-129m .01 5,000 Terbium-160 .01 4,000 Thulium-170 .01 4,000 Tin-113 .01 10,000 Tin-123 .01 3,000 Tin-126 .01 1,000 Titanium-44 .01 100 Vanadium-48 .01 7,000 Xenon-133 1.0 900,000...

  9. 40 CFR 471.11 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... SOURCE CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.11 Effluent limitations representing the... lead-tin-bismuth rolled with emulsions Antimony 0.068 0.030 Lead 0.010 0.005 Oil and grease 0.468 0.281... mg/off-kg (pounds per million off-pound) of lead-tin-bismuth rolled with soap solutions Antimony 0...

  10. 76 FR 66949 - Privacy Act of 1974; Notification of the Establishment of a Privacy Act System of Records, HUD...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-28

    ... collect and store vendor Taxpayer Identification Numbers (TINs), vendor names, and associated point-of-contacts information: such as names, Social Security numbers when used in lieu of TINs, Dun and Bradstreet... government to supply TINs under 31 U.S.C. 7701(c). Vendor SSNs are supplied under Clause 52.222-8, Payrolls...

  11. 10 CFR 30.72 - Schedule C-Quantities of radioactive materials requiring consideration of the need for an...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ...-127m .01 5,000 Tellurium-129m .01 5,000 Terbium-160 .01 4,000 Thulium-170 .01 4,000 Tin-113 .01 10,000 Tin-123 .01 3,000 Tin-126 .01 1,000 Titanium-44 .01 100 Vanadium-48 .01 7,000 Xenon-133 1.0 900,000...

  12. 40 CFR 471.12 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.12 Effluent limitations representing the degree of... average mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with emulsion Antimony 0.067... lead-tin-bismuth rolled with soap solutions Antimony 0.120 0.055 Lead 0.018 0.009 (c) Drawing spent...

  13. 40 CFR 471.11 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... SOURCE CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.11 Effluent limitations representing the... lead-tin-bismuth rolled with emulsions Antimony 0.068 0.030 Lead 0.010 0.005 Oil and grease 0.468 0.281... mg/off-kg (pounds per million off-pound) of lead-tin-bismuth rolled with soap solutions Antimony 0...

  14. 40 CFR 471.12 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.12 Effluent limitations representing the degree of... average mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with emulsion Antimony 0.067... lead-tin-bismuth rolled with soap solutions Antimony 0.120 0.055 Lead 0.018 0.009 (c) Drawing spent...

  15. 26 CFR 31.3406(g)-3 - Exemption while payee is waiting for a taxpayer identification number.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... days. If a payor has received an awaiting-TIN certificate from a payee with respect to an account or...-TIN certificate. The payor must withhold under section 3406 beginning after the 60-day exemption... required in § 31.3406(d)-1. Regardless of whether the payee provides an awaiting-TIN certificate to a payor...

  16. 26 CFR 31.3406(g)-3 - Exemption while payee is waiting for a taxpayer identification number.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... days. If a payor has received an awaiting-TIN certificate from a payee with respect to an account or...-TIN certificate. The payor must withhold under section 3406 beginning after the 60-day exemption... required in § 31.3406(d)-1. Regardless of whether the payee provides an awaiting-TIN certificate to a payor...

  17. 26 CFR 31.3406(g)-3 - Exemption while payee is waiting for a taxpayer identification number.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... days. If a payor has received an awaiting-TIN certificate from a payee with respect to an account or...-TIN certificate. The payor must withhold under section 3406 beginning after the 60-day exemption... required in § 31.3406(d)-1. Regardless of whether the payee provides an awaiting-TIN certificate to a payor...

  18. 40 CFR 471.12 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-Tin-Bismuth Forming Subcategory § 471.12 Effluent limitations representing the degree of effluent... average mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with emulsion Antimony 0.067... lead-tin-bismuth rolled with soap solutions Antimony 0.120 0.055 Lead 0.018 0.009 (c) Drawing spent...

  19. 40 CFR 471.12 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-Tin-Bismuth Forming Subcategory § 471.12 Effluent limitations representing the degree of effluent... average mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with emulsion Antimony 0.067... lead-tin-bismuth rolled with soap solutions Antimony 0.120 0.055 Lead 0.018 0.009 (c) Drawing spent...

  20. 10 CFR 30.72 - Schedule C-Quantities of radioactive materials requiring consideration of the need for an...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ...-127m .01 5,000 Tellurium-129m .01 5,000 Terbium-160 .01 4,000 Thulium-170 .01 4,000 Tin-113 .01 10,000 Tin-123 .01 3,000 Tin-126 .01 1,000 Titanium-44 .01 100 Vanadium-48 .01 7,000 Xenon-133 1.0 900,000...

  1. 40 CFR 471.12 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.12 Effluent limitations representing the degree of... average mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with emulsion Antimony 0.067... lead-tin-bismuth rolled with soap solutions Antimony 0.120 0.055 Lead 0.018 0.009 (c) Drawing spent...

  2. 78 FR 11648 - Privacy Act of 1974; Notice of New System of Records

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-19

    ... Taxpayer Identification Number (TIN), and entity address. In the case of a sole proprietor, tax laws allow them to use their Social Security Number (SSN) as their TIN if they do not have a separate Employer Identification Number (EIN). The TIN (whether it be an EIN or an SSN) is not publicly available data. In the...

  3. A facile way to control phase of tin selenide flakes by chemical vapor deposition

    NASA Astrophysics Data System (ADS)

    Wang, Zhigang; Pang, Fei

    2018-06-01

    Although two-dimensional (2D) tin selenides are attracting intense attentions, studies on its phase transition are still relatively few. Here we report a facile way to control the phase growth of tin selenide flakes on mica and SiO2/Si by only adjusting nominal Sn:Se ratio, which refers to the amount of loaded SnO2 and Se precursors. High normal Sn:Se ratio induced SnSe flakes, conversely SnSe2 flakes formed. It could be used as a practical guide to selectively synthesize pure phase of single crystalline 2D layered chalcogenide materials similar to tin selenides.

  4. Studies on the bioavailability of zinc in humans: intestinal interaction of tin and zinc.

    PubMed

    Solomons, N W; Marchini, J S; Duarte-Favaro, R M; Vannuchi, H; Dutra de Oliveira, J E

    1983-04-01

    Mineral/mineral interactions at the intestinal level are important in animal nutrition and toxicology, but only limited understanding of their extent or importance in humans has been developed. An inhibitory interaction of dietary tin on zinc retention has been recently described from human metabolic studies. We have explored the tin/zinc interaction using the change-in-plasma-zinc-concentration method with a standard dosage of 12.5 mg of zinc as zinc sulfate in 100 ml of Coca-Cola. Sn/Zn ratios of 2:1, 4:1, and 8:1, constituted by addition of 25, 50, and 100 mg of tin as stannous chloride, had no significant overall effect on zinc uptake. The 100-mg dose of tin produced noxious gastrointestinal symptoms. Addition of iron as ferrous sulfate to form ratios of Sn/Fe/Zn of 1:1:1 and 2:2:1 with the standard zinc solution and the appropriate doses of tin produced a reduction of zinc absorption not dissimilar from that seen previously with zinc and iron alone, and addition of picolinic acid did not influence the uptake of zinc from the solution with the 2:2:1 Sn/Fe/Zn ratio.

  5. Preliminary study of tin slag concrete mixture

    NASA Astrophysics Data System (ADS)

    Hashim, Mohd Jamil; Mansor, Ishak; Pauzi Ismail, Mohamad; Sani, Suhairy; Azmi, Azhar; Sayuti, Shaharudin; Zaidi Ibrahim, Mohd; Adli Anuar, Abul; Rahim, Abdul Adha Abdul

    2018-01-01

    The study focuses on practices to facilitate tin smelting industry to reduce radioactive waste product (Tin Slag) by diluting its radioactivity to a safe level and turning it to a safer infrastructural building product. In the process the concrete mix which include Portland cement, sand, tin slag, water and plasticizer are used to produce interlocking brick pavements, piles and other infrastructural products. The mixing method follows DOE (UK) standard method of mixing targeted at in selected compressive strength suitable for its function and durability. A batching machine is used in the mixing and six test cubes are produced for the test. The testing equipment used are a compressional machine, ultrasonic measurement and a Geiger Muller counter to evaluate of the concrete mix to find the lowest emission of radiation surface dose without compromising the strength of concrete mix. The result obtained indicated the radioactivity of tin slag in the mixing process has reduced to background level that is 0.5μSv/h while the strength and workability of the concrete has not been severely affected. In conclusion, the concrete mix with tin slag has shown the potential it can be turned into a safe beneficial infrastructural product with good strength.

  6. Understanding the gas sensing properties of polypyrrole coated tin oxide nanofiber mats

    NASA Astrophysics Data System (ADS)

    Bagchi, Sudeshna; Ghanshyam, C.

    2017-03-01

    Tin oxide-polypyrrole composites have been widely studied for their enhanced sensing performance towards ammonia vapours, but further investigations are required for an understanding of the interaction mechanisms with different target analytes. In this work, polypyrrole coated tin oxide fibers have been synthesized using a two-step approach of electrospinning and vapour phase polymerization for the sensing of ammonia, ethanol, methanol, 2-propanol and acetone vapours. The resistance variation in the presence of these vapours of different nature and concentration is investigated for the determination of sensor response. A decrease in resistance occurred on interaction of tin oxide-polypyrrole with ammonia, as opposed to previous reported works. Partial reduction of polypyrrole due to interfacial interaction with tin oxide has been proposed to explain this behavior. High sensitivity of 7.45 is achieved for 1 ppm ammonia concentration. Furthermore, the sensor exhibited high sensitivity and a faster response towards ethanol vapours although methanol has the highest electron donating capability. The catalytic mechanism has been discussed to explain this interesting behavior. The results reveal that interaction between tin oxide and polypyrrole is crucial to control the predominant sensing mechanism.

  7. LiGe(SiMe₃)₃: A New Substituent for the Synthesis of Metalloid Tin Clusters from Metastable Sn(I) Halide Solutions.

    PubMed

    Binder, Mareike; Schrenk, Claudio; Block, Theresa; Pöttgen, Rainer; Schnepf, Andreas

    2018-04-26

    The most fruitful synthetic route to metalloid tin clusters applies the disproportionation reaction of metastable Sn(I) halide solutions, whereby Si(SiMe₃)₃ is mostly used as the stabilizing substituent. Here, we describe the synthesis and application of the slightly modified substituent Ge(SiMe₃)₃, which can be used for the synthesis of metalloid tin clusters to give the neutral cluster Sn 10 [Ge(SiMe₃)₃]₆ as well as the charged clusters {Sn 10 [Ge(SiMe₃)₃]₅} − and {Sn 10 [Ge(SiMe₃)₃]₄} 2− . The obtained metalloid clusters are structurally similar to their Si(SiMe₃)₃ derivatives. However, differences with respect to the stability in solution are observed. Additionally, a different electronic situation for the tin atoms is realized as shown by 119m Sn Mössbauer spectroscopy, giving further insight into the different kinds of tin atoms within the metalloid cluster {Sn 10 [Ge(SiMe₃)₃]₄} 2− . The synthesis of diverse derivatives gives the opportunity to check the influence of the substituent for further investigations of metalloid tin cluster compounds.

  8. Liquid chromatography-hydride generation-atomic absorption spectrometry for the speciation of tin in seafoods.

    PubMed

    Viñas, Pilar; López-García, Ignacio; Merino-Meroño, Beatriz; Campillo, Natalia; Hernández-Cordóba, Manuel

    2004-04-01

    Liquid chromatography with hydride generation atomic absorption spectrometry as the detection system was applied to the separation and determination of inorganic tin, tributyltin, dibutyltin, monobutyltin, diphenyltin and monophenyltin. A reversed phase C18 column and a methanol/water/acetic acid (70:27:3, v/v/v) mixture containing 0.05%(v/v) triethylamine and 0.1%(w/v) tropolone as the mobile phase (isocratic elution) were used. Extraction of organotins from the samples was carried out using methanol containing 0.05%(w/v) tropolone, a process that was repeated twice. The supernatants were shaken with water and dichloromethane in a separating funnel and the organic phase was collected and evaporated to dryness. When the method was applied to the speciation of tin in fresh and canned mussels, no organotins above the detection limits were identified in any of the samples, inorganic tin being the only species detected. The reliability of the procedure was checked by analyzing the total tin content of the samples by electrothermal atomic absorption spectrometry and by speciation of tin in a certified reference material, mussel tissue (CRM 477). The method can be used for environmental monitoring of organotins contaminated samples.

  9. Determination of tin isotope ratios in cassiterite by femtosecond laser ablation multicollector inductively coupled plasma mass spectrometry

    NASA Astrophysics Data System (ADS)

    Schulze, Marie; Ziegerick, Marco; Horn, Ingo; Weyer, Stefan; Vogt, Carla

    2017-04-01

    In comparison to isotope analysis of dissolved samples femtosecond laser ablation multicollector inductively coupled plasma mass spectrometry (fs-LA-MC-ICP-MS) enables precise isotope ratio analyses consuming much less sample material and with a minimum effort in sample preparation. This is especially important for the investigation of valuable historical objects for which visual traces of sampling are unwanted. The present study provides a basis for tin isotope ratio measurements using LA-MC-ICP-MS technique. For this, in house isotope standards had to be defined. Investigations on interferences and matrix effects illustrate that beside Sb only high Te contents (with values above those to be expected in cassiterite) result in a significant shift of the measured tin isotope ratios. This effect can partly be corrected for using natural isotope abundances. However, a natural isotope fractionation of Te cannot be excluded. Tin beads reduced from cassiterite were analysed by laser ablation and after dissolution. It was shown that tin isotope ratios can be determined accurately by using fs-LA-MC-ICP-MS. Furthermore the homogeneity of tin isotope ratios in cassiterite was proven.

  10. The role of titanium nitride supports for single-atom platinum-based catalysts in fuel cell technology.

    PubMed

    Zhang, Ren-Qin; Lee, Tae-Hun; Yu, Byung-Deok; Stampfl, Catherine; Soon, Aloysius

    2012-12-28

    As a first step towards a microscopic understanding of single-Pt atom-dispersed catalysts on non-conventional TiN supports, we present density-functional theory (DFT) calculations to investigate the adsorption properties of Pt atoms on the pristine TiN(100) surface, as well as the dominant influence of surface defects on the thermodynamic stability of platinized TiN. Optimized atomic geometries, energetics, and analysis of the electronic structure of the Pt/TiN system are reported for various surface coverages of Pt. We find that atomic Pt does not bind preferably to the clean TiN surface, but under typical PEM fuel cell operating conditions, i.e. strongly oxidizing conditions, TiN surface vacancies play a crucial role in anchoring the Pt atom for its catalytic function. Whilst considering the energetic stability of the Pt/TiN structures under varying N conditions, embedding Pt at the surface N-vacancy site is found to be the most favorable under N-lean conditions. Thus, the system of embedding Pt at the surface N-vacancy sites on TiN(100) surfaces could be promising catalysts for PEM fuel cells.

  11. A simple, rapid and green ultrasound assisted and ionic liquid dispersive microextraction procedure for the determination of tin in foods employing ETAAS.

    PubMed

    Tuzen, Mustafa; Uluozlu, Ozgur Dogan; Mendil, Durali; Soylak, Mustafa; Machado, Luana O R; Dos Santos, Walter N L; Ferreira, Sergio L C

    2018-04-15

    This paper proposes a simple, rapid and green ultrasound assisted and ionic liquid dispersive microextraction procedure using pyrocatechol violet (PV) as complexing reagent and 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)-imide [C 6 MIM][Tf 2 N] as ionic liquid for the detection of tin employing electrothermal atomic absorption spectrometry (ETAAS). The optimization step was performed using a two-level full factorial design involving the following factors: pH of the working media, amount reagents, ionic liquid volume and extraction time and the chemometric response was tin recovery. The procedure allowed the determination of tin with limits of detection and quantification of 3.4 and 11.3 ng L -1 , respectively. The relative standard deviation was 4.5% for a tin solution of 0.50 µg L -1 . The validation method was confirmed by analysis of rice flour certified reference material. The method was applied for the quantification of tin in several food samples. The concentration range found varied from 0.10 to 1.50 µg g -1 . Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. The Embedded Atom Model and large-scale MD simulation of tin under shock loading

    NASA Astrophysics Data System (ADS)

    Sapozhnikov, F. A.; Ionov, G. V.; Dremov, V. V.; Soulard, L.; Durand, O.

    2014-05-01

    The goal of the work was to develop an interatomic potential, that can be used in large-scale classical MD simulations to predict tin properties near the melting curve, the melting curve itself, and the kinetics of melting and solidification when shock and ramp loading. According to phase diagram, shocked tin melts from bcc phase, and since the main objective was to investigate melting, the EAM was parameterized for bcc phase. The EAM was optimized using isothermal compression data (experimental at T=300 K and ab-initio at T=0 K for bcc, fcc, bct structures), experimental and QMD data on the Hugoniot and on the melting at elevated pressures. The Hugoniostat calculations centred at β-tin at ambient conditions showed that the calculated Hugoniot is in good agreement with experimental and QMD data above p-bct transition pressure. Calculations of overcooled liquid in pressure range corresponding to bcc phase showed crystallization into bcc phase. Since the principal Hugoniot of tin originates from the β-tin that is not described by this EAM the special initial state of bcc samples was constructed to perform large-scale MD simulations of shock loading.

  13. On-line coating of glass with tin oxide by atmospheric pressure chemical vapor deposition.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Allendorf, Mark D.; Sopko, J.F.; Houf, William G.

    2006-11-01

    Atmospheric pressure chemical vapor deposition (APCVD) of tin oxide is a very important manufacturing technique used in the production of low-emissivity glass. It is also the primary method used to provide wear-resistant coatings on glass containers. The complexity of these systems, which involve chemical reactions in both the gas phase and on the deposition surface, as well as complex fluid dynamics, makes process optimization and design of new coating reactors a very difficult task. In 2001 the U.S. Dept. of Energy Industrial Technologies Program Glass Industry of the Future Team funded a project to address the need for more accuratemore » data concerning the tin oxide APCVD process. This report presents a case study of on-line APCVD using organometallic precursors, which are the primary reactants used in industrial coating processes. Research staff at Sandia National Laboratories in Livermore, CA, and the PPG Industries Glass Technology Center in Pittsburgh, PA collaborated to produce this work. In this report, we describe a detailed investigation of the factors controlling the growth of tin oxide films. The report begins with a discussion of the basic elements of the deposition chemistry, including gas-phase thermochemistry of tin species and mechanisms of chemical reactions involved in the decomposition of tin precursors. These results provide the basis for experimental investigations in which tin oxide growth rates were measured as a function of all major process variables. The experiments focused on growth from monobutyltintrichloride (MBTC) since this is one of the two primary precursors used industrially. There are almost no reliable growth-rate data available for this precursor. Robust models describing the growth rate as a function of these variables are derived from modeling of these data. Finally, the results are used to conduct computational fluid dynamic simulations of both pilot- and full-scale coating reactors. As a result, general conclusions are reached concerning the factors affecting the growth rate in on-line APCVD reactors. In addition, a substantial body of data was generated that can be used to model many different industrial tin oxide coating processes. These data include the most extensive compilation of thermochemistry for gas-phase tin-containing species as well as kinetic expressions describing tin oxide growth rates over a wide range of temperatures, pressures, and reactant concentrations.« less

  14. Development of TiN particulates reinforced SS316 based metal matrix composite by direct metal laser sintering technique and its characterization

    NASA Astrophysics Data System (ADS)

    Hussain, Manowar; Mandal, Vijay; Kumar, Vikas; Das, A. K.; Ghosh, S. K.

    2017-12-01

    The present study describes the fabrication of TiN particulates reinforced SS316 based Metal Matrix Composites (MMCs) in nitrogen and argon atmosphere. The influence of sintering process parameters on microstructure, density, porosity, wear rate and microhardness of the fabricated samples has been analyzed. The input variable process parameters, such as, laser power density (range: 4.13-5.57 W/cm2 (× 104)), scanning speed (range: 3500-4500 mm/min) and the constant parameters, such as, laser beam diameter (0.4 mm), hatching distance (0.2 mm) and layer thickness (0.4 mm) have been considered in the process. It has been observed from Field Emission Scanning Electron Microscopy (FESEM) analysis that TiN and SS316 powder mixture can be sintered in which chromium acts as a binder. Fine gaps are not found at the interface between TiN and SS316 when the mixture is sintered in nitrogen atmosphere. With an increase in the percentage of TiN, the density and wear rate decreases. However, when the reinforcement is taken beyond 18% by weight, the wear rate starts increasing. The microhardness also increases with an increase in the percentage of TiN. The microstructure, elemental compositions and phase characterization of the developed sintered MMCs have been examined by FESEM, EDX (Energy-dispersive X-ray spectroscopy) and XRD (X-ray diffractometer) analysis, respectively. The results have demonstrated the suitability of the TiN reinforced SS316 MMCs for industrial applications.

  15. Synchrotron radiation x-ray photoelectron spectroscopy study on the interface chemistry of high-k PrxAl2-xO3 (x=0-2) dielectrics on TiN for dynamic random access memory applications

    NASA Astrophysics Data System (ADS)

    Schroeder, T.; Lupina, G.; Sohal, R.; Lippert, G.; Wenger, Ch.; Seifarth, O.; Tallarida, M.; Schmeisser, D.

    2007-07-01

    Engineered dielectrics combined with compatible metal electrodes are important materials science approaches to scale three-dimensional trench dynamic random access memory (DRAM) cells. Highly insulating dielectrics with high dielectric constants were engineered in this study on TiN metal electrodes by partly substituting Al in the wide band gap insulator Al2O3 by Pr cations. High quality PrAlO3 metal-insulator-metal capacitors were processed with a dielectric constant of 19, three times higher than in the case of Al2O3 reference cells. As a parasitic low dielectric constant interface layer between PrAlO3 and TiN limits the total performance gain, a systematic nondestructive synchrotron x-ray photoelectron spectroscopy study on the interface chemistry of PrxAl2-xO3 (x =0-2) dielectrics on TiN layers was applied to unveil its chemical origin. The interface layer results from the decreasing chemical reactivity of PrxAl2-xO3 dielectrics with increasing Pr content x to reduce native Ti oxide compounds present on unprotected TiN films. Accordingly, PrAlO3 based DRAM capacitors require strict control of the surface chemistry of the TiN electrode, a parameter furthermore of importance to engineer the band offsets of PrxAl2-xO3/TiN heterojunctions.

  16. 26 CFR 31.3406(d)-5 - Backup withholding when the Service or a broker notifies the payor to withhold because the payee...

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... combination (name/TIN combination) is incorrect and the payor is required under paragraph (c)(3) of this section to identify that account as having the same name/TIN combination. After receiving a notice from... an account as having the incorrect name/TIN combination under paragraph (c)(3) of this section, the...

  17. 26 CFR 31.3406(d)-5 - Backup withholding when the Service or a broker notifies the payor to withhold because the payee...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... combination (name/TIN combination) is incorrect and the payor is required under paragraph (c)(3) of this section to identify that account as having the same name/TIN combination. After receiving a notice from... an account as having the incorrect name/TIN combination under paragraph (c)(3) of this section, the...

  18. 26 CFR 1.645-1 - Election by certain revocable trusts to be treated as part of estate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... taxpayer identification numbers (TINs) and the filing of a Form 1041, “U.S. Income Tax Return for Estates... for the combined electing trusts filing as an estate during the election period. (d) TIN and filing requirements for a QRT—(1) Obtaining a TIN. Regardless of whether there is an executor for a related estate and...

  19. 40 CFR 471.11 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.11 Effluent limitations representing the degree of... lead-tin-bismuth rolled with emulsions Antimony 0.068 0.030 Lead 0.010 0.005 Oil and grease 0.468 0.281... mg/off-kg (pounds per million off-pound) of lead-tin-bismuth rolled with soap solutions Antimony 0...

  20. 40 CFR 471.11 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.11 Effluent limitations representing the degree of... lead-tin-bismuth rolled with emulsions Antimony 0.068 0.030 Lead 0.010 0.005 Oil and grease 0.468 0.281... mg/off-kg (pounds per million off-pound) of lead-tin-bismuth rolled with soap solutions Antimony 0...

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top