Characterization of Microbial Communities Found in Bioreactor Effluent

NASA Technical Reports Server (NTRS)

Flowe, Candice

2013-01-01

The purpose of this investigation was to examine microbial communities of simulated wastewater effluent from hollow fiber membrane bioreactors collected from the Space Life Science Laboratory and Texas Technical University. Microbes were characterized using quantitative polymerase chain reaction where a total count of bacteria and fungi were determined. The primers that were used to determine the total count of bacteria and fungi were targeted for 16S rDNA genes and the internal transcribed spacer, respectively. PCR products were detected with SYBR Green I fluorescent dye and a melting curve analysis was performed to identify unique melt profiles resulting from DNA sequence variations from each species of the community. Results from both the total bacteria and total fungi count assays showed that distinct populations were present in isolates from these bioreactors. This was exhibited by variation in the number of peaks observed on the melting curve analysis graph. Further analysis of these results using species-specific primers will shed light on exactly which microbes are present in these effluents. Information gained from this study will enable the design of a system that can efficiently monitor microbes that play a role in the biogeochemical cycling of nitrogen in wastewater on the International Space Station to assist in the design of a sustainable system capable of converting this nutrient.

Isolation of Pseudobutyrivibrio ruminis and Pseudobutyrivibrio xylanivorans from rumen of Creole goats fed native forage diet.

PubMed

Grilli, D J; Cerón, M E; Paez, S; Egea, V; Schnittger, L; Cravero, S; Escudero, M Sosa; Allegretti, L; Arenas, G N

2013-09-01

We isolated and identified functional groups of bacteria in the rumen of Creole goats involved in ruminal fermentation of native forage shrubs. The functional bacterial groups were evaluated by comparing the total viable, total anaerobic, cellulolytic, hemicellulolytic, and amylolytic bacterial counts in the samples taken from fistulated goats fed native forage diet (Atriplex lampa and Prosopis flexuosa). Alfalfa hay and corn were used as control diet. The roll tubes method increased the possibility of isolating and 16S rDNA gene sequencing allowed definitive identification of bacterial species involved in the ruminal fermentation. The starch and fiber contents of the diets influenced the number of total anaerobic bacteria and fibrolytic and amylolytic functional groups. Pseudobutyrivibrio ruminis and Pseudobutyrivibrio xylanivorans were the main species isolated and identified. The identification of bacterial strains involved in the rumen fermentation helps to explain the ability of these animals to digest fiber plant cell wall contained in native forage species.

Effects of Agave tequilana fructans with different degree of polymerization profiles on the body weight, blood lipids and count of fecal Lactobacilli/Bifidobacteria in obese mice.

PubMed

Márquez-Aguirre, Ana Laura; Camacho-Ruiz, Rosa Maria; Arriaga-Alba, Myriam; Padilla-Camberos, Eduardo; Kirchmayr, Manuel Reinhart; Blasco, José Luis; González-Avila, Marisela

2013-08-01

Fructans are dietary fibers with beneficial effects on the gastrointestinal physiology and offer a promising approach for the treatment of some metabolic disorders associated with obesity. In vitro and in vivo studies were developed to test the safety of fructans obtained from Agave tequilana Weber var. azul. Additionally, an in vivo experiment using a diet-induced obesity model was performed to compare the effect of agave fructans with different degree of polymerization (DP) profiles: agave fructans with DP > 10 (LcF), agave FOS with DP < 10 (ScF), and agave fructans with and without demineralization (dTF, TF) versus commercial chicory fructans (OraftiSynergy1™) on the body weight change, fat, total cholesterol, triglycerides and count of fecal Lactobacillus spp. and Bifidobacterium spp. Results showed that A. tequilana fructans were not mutagenic and were safe even at a dose of 5 g per kg b.w. Obese mice that received ScF showed a significant decrease in body weight gain, fat tissue and total cholesterol without increasing the count of fecal Bifidobacteria. Whereas, obese mice that received LcF and TF showed decreased triglycerides and an increased count of fecal Bifidobacteria. Interestingly, although obese mice that received dTF did not show changes in body weight gain, fat tissue, total cholesterol or triglycerides, they showed an increase in the count of Bifidobacteria. These results demonstrate that both the degree of polymerization and the demineralization process can influence the biological activity of agave fructans.

Hierarchical models for epidermal nerve fiber data.

PubMed

Andersson, Claes; Rajala, Tuomas; Särkkä, Aila

2018-02-10

While epidermal nerve fiber (ENF) data have been used to study the effects of small fiber neuropathies through the density and the spatial patterns of the ENFs, little research has been focused on the effects on the individual nerve fibers. Studying the individual nerve fibers might give a better understanding of the effects of the neuropathy on the growth process of the individual ENFs. In this study, data from 32 healthy volunteers and 20 diabetic subjects, obtained from suction induced skin blister biopsies, are analyzed by comparing statistics for the nerve fibers as a whole and for the segments that a nerve fiber is composed of. Moreover, it is evaluated whether this type of data can be used to detect diabetic neuropathy, by using hierarchical models to perform unsupervised classification of the subjects. It is found that using the information about the individual nerve fibers in combination with the ENF counts yields a considerable improvement as compared to using the ENF counts only. Copyright © 2017 John Wiley & Sons, Ltd.

Microbiological Characteristic and Nutrition Quality of Goat Milk Kefir Based on Vitamin D3 Fortification Time

NASA Astrophysics Data System (ADS)

Fauziyyah, F.; Panunggal, B.; Afifah, D. N.; Rustanti, N.; Anjani, G.

2018-02-01

Goat milk kefir fortified with vitamin D3 is expected to benefit individual with insulin resistance. Different vitamin D3 fortification time allegedly effect microbiological characteristic and nutrition quality of goat milk kefir due to its microbial growth curve, thus this study aimed to analyze those parameters. This study was an experimental research. This study contains five treatments (vitamin D3 fortification at 0, 6, 12, 18, or 24 hours of fermentation) and a group of control. Total lactic acid bacteria, vitamin D3, protein level, fat contain, crude fiber, viscosity, and pH was analyzed by Total Plate Count, spectrophotometry, Bradford method, Babcock method, gravimetric analysis, Ostwald method, and pH meter respectively. Time of vitamin D3 fortification significantly effect vitamin D3 content (p=0,021), fat content (p=0,001), crude fiber (p=0,0001), viscosity (p=0,010), and total lactic acid bacteria (p=0,048). The highest vitamin D3 content was found on the group fortified at 6 hours of fermentation. All treatment groups has lower fat content and crude fiber content than control group. Total LAB in all group meet the Codex standard (≥ 107 CFU/ml). Control group and fortification group at 24 hours of fermentation have higher viscosity than other groups. There was no significant difference found in goat milk kefir protein level (p=0,262) and pH (p=0,056) despite the difference of fortification time. Vitamin D3 fortification time effect vitamin D3 content, fat content, crude fiber, viscosity, and total lactic acid bacteria of goat milk kefir, but did not effect protein content and pH of goat milk kefir.

Diagnostics of glass fiber reinforced polymers and comparative analysis of their fabrication techniques with the use of acoustic emission

NASA Astrophysics Data System (ADS)

Bashkov, O. V.; Bryansky, A. A.; Panin, S. V.; Zaikov, V. I.

2016-11-01

Strength properties of the glass fiber reinforced polymers (GFRP) fabricated by vacuum and vacuum autoclave molding techniques were analyzed. Measurements of porosity of the GFRP parts manufactured by various molding techniques were conducted with the help of optical microscopy. On the basis of experimental data obtained by means of acoustic emission hardware/software setup, the technique for running diagnostics and forecasting the bearing capacity of polymeric composite materials based on the result of three-point bending tests has been developed. The operation principle of the technique is underlined by the evaluation of the power function index change which takes place on the dependence of the total acoustic emission counts versus the loading stress.

The effect of age and medical comorbidities on in vitro myoblast expansion in women with and without pelvic organ prolapse.

PubMed

Price, Danielle Markle; Lane, Felicia L; Craig, Jocelyn B; Nistor, Gabriel; Motakef, Saba; Pham, Quynh-Ahn; Keirstead, Hans

2014-01-01

This is an observational study is designed to assess the influence of age, prolapse and medical co-morbidities on myogenic stem cells growth in-vitro. A biopsy of the rectus abdominus muscle was obtained during surgery in patients with and without pelvic organ prolapse (POP). Nuclei number and fiber count were correlated with patient's age, presence of POP, and medical comorbidities. Efficiency of expansion of myogenic stem cells in vitro was calculated. The percentage of Pax7-, MyoD-, and desmin-positive cells was correlated with age, POP status, and medical comorbidities. A total of 17 specimens were obtained; 13 specimens were available for histologic analysis. There was no correlation between patient's age, POP status or medical comorbidities and nuclei or fiber count, growth rate, or the percentage of Pax7- and MyoD-positive cells. Patients with 2 to 4 medical comorbidities were noted to have a significantly lower percentage of desmin-positive cells. Specimens with a higher nuclear count had significantly better cellular expansion. Data were analyzed using Kruskal-Wallis or Wilcoxon rank sum statistics. Multiple medical comorbidities but not patient's age or POP status influenced in vitro myogenic stem cell growth. These data suggest that patients with advancing age or POP may be acceptable autologous donors if treatment of urinary or anal incontinence requires myoblast transplantation.

Intravascular probe for detection of vulnerable plaque

NASA Astrophysics Data System (ADS)

Patt, Bradley E.; Iwanczyk, Jan S.; MacDonald, Lawrence R.; Yamaguchi, Yuko; Tull, Carolyn R.; Janecek, Martin; Hoffman, Edward J.; Strauss, H. William; Tsugita, Ross; Ghazarossian, Vartan

2001-12-01

Coronary angiography is unable to define the status of the atheroma, and only measures the luminal dimensions of the blood vessel, without providing information about plaque content. Up to 70% of heart attacks are caused by minimally obstructive vulnerable plaques, which are too small to be detected adequately by angiography. We have developed an intravascular imaging detector to identify vulnerable coronary artery plaques. The detector works by sensing beta or conversion electron radiotracer emissions from plaque-binding radiotracers. The device overcomes the technical constraints of size, sensitivity and conformance to the intravascular environment. The detector at the distal end of the catheter uses six 7mm long by 0.5mm diameter scintillation fibers coupled to 1.5m long plastic fibers. The fibers are offset from each other longitudinally by 6mm and arranged spirally around a guide wire in the catheter. At the proximal end of the catheter the optical fibers are coupled to an interface box with a snap on connector. The interface box contains a position sensitive photomultiplier tube (PSPMT) to decode the individual fibers. The whole detector assembly fits into an 8-French (2.7 mm in diameter) catheter. The PSPMT image is further decoded with software to give a linear image, the total instantaneous count rate and an audio output whose tone corresponds to the count rate. The device was tested with F-18 and Tl-204 sources. Spectrometric response, spatial resolution, sensitivity and beta to background ratio were measured. System resolution is 6 mm and the sensitivity is >500 cps / micrometers Ci when the source is 1 mm from the detector. The beta to background ratio was 11.2 for F-18 measured on a single fiber. The current device will lead to a system allowing imaging of labeled vulnerable plaque in coronary arteries. This type of signature is expected to enable targeted and cost effective therapies to prevent acute coronary artery diseases such as: unstable angina, acute myocardial infarction, and sudden cardiac death.

P16INK4a Positive Cells in Human Skin Are Indicative of Local Elastic Fiber Morphology, Facial Wrinkling, and Perceived Age

PubMed Central

Waaijer, Mariëtte E. C.; Gunn, David A.; Adams, Peter D.; Pawlikowski, Jeff S.; Griffiths, Christopher E. M.; van Heemst, Diana; Slagboom, P. Eline; Westendorp, Rudi G. J.; Maier, Andrea B.

2016-01-01

Senescent cells are more prevalent in aged human skin compared to young, but evidence that senescent cells are linked to other biomarkers of aging is scarce. We counted cells positive for the tumor suppressor and senescence associated protein p16INK4a in sun-protected upper-inner arm skin biopsies from 178 participants (aged 45–81 years) of the Leiden Longevity Study. Local elastic fiber morphology, facial wrinkles, and perceived facial age were compared to tertiles of p16INK4a counts, while adjusting for chronological age and other potential confounders. The numbers of epidermal and dermal p16INK4a positive cells were significantly associated with age-associated elastic fiber morphologic characteristics, such as longer and a greater number of elastic fibers. The p16INK4a positive epidermal cells (identified as primarily melanocytes) were also significantly associated with more facial wrinkles and a higher perceived age. Participants in the lowest tertile of epidermal p16INK4a counts looked 3 years younger than those in the highest tertile, independently of chronological age and elastic fiber morphology. In conclusion, p16INK4a positive cell numbers in sun-protected human arm skin are indicative of both local elastic fiber morphology and the extent of aging visible in the face. PMID:26286607

Development of a wavelength-separated type scintillator with optical fiber (SOF) dosimeter to compensate for the Cerenkov radiation effect

PubMed Central

Ishikawa, Masayori; Nagase, Naomi; Matsuura, Taeko; Hiratsuka, Junichi; Suzuki, Ryusuke; Miyamoto, Naoki; Sutherland, Kenneth Lee; Fujita, Katsuhisa; Shirato, Hiroki

2015-01-01

Abstract The scintillator with optical fiber (SOF) dosimeter consists of a miniature scintillator mounted on the tip of an optical fiber. The scintillator of the current SOF dosimeter is a 1-mm diameter hemisphere. For a scintillation dosimeter coupled with an optical fiber, measurement accuracy is influenced by signals due to Cerenkov radiation in the optical fiber. We have implemented a spectral filtering technique for compensating for the Cerenkov radiation effect specifically for our plastic scintillator-based dosimeter, using a wavelength-separated counting method. A dichroic mirror was used for separating input light signals. Individual signal counting was performed for high- and low-wavelength light signals. To confirm the accuracy, measurements with various amounts of Cerenkov radiation were performed by changing the incident direction while keeping the Ir-192 source-to-dosimeter distance constant, resulting in a fluctuation of <5%. Optical fiber bending was also addressed; no bending effect was observed for our wavelength-separated SOF dosimeter. PMID:25618136

Microstructured Optical Fiber for X-ray Detection

NASA Technical Reports Server (NTRS)

DeHaven, Stanton L.

2009-01-01

A novel scintillating optical fiber is presented using a composite micro-structured quartz optical fiber. Scintillating materials are introduced into the multiple inclusions of the fiber. This creates a composite optical fiber having quartz as a cladding with an organic scintillating material core. X-ray detection using these fibers is compared to a collimated cadmium telluride (CdTe) detector over an energy range from 10 to 40 keV. Results show a good correlation between the fiber count rate trend and that of the CdTe detector.

Lung Cancer Risk Associated with Regulated and Unregulated Chrysotile Asbestos Fibers.

PubMed

Hamra, Ghassan B; Richardson, David B; Dement, John; Loomis, Dana

2017-03-01

Regulation of asbestos fibers in the workplace is partly determined by which fibers can be visually counted. However, a majority of fibers are too short and thin to count this way and are, consequently, not subject to regulation. We estimate lung cancer risk associated with asbestos fibers of varying length and width. We apply an order-constrained prior both to leverage external information from toxicological studies of asbestos health effects. This prior assumes that risk from asbestos fibers increases with increasing length and decreases with increasing width. When we apply a shared mean for the effect of all asbestos fiber exposure groups, the rate ratios for each fiber group per unit exposure appear mostly equal. Rate ratio estimates for fibers of diameter <0.25 μm and length <1.5 and 1.5-5.0 μm are the most precise. When applying an order-constrained prior, we find that estimates of lung cancer rate ratio per unit of exposure to unregulated fibers 20-40 and >40 μm in the thinnest fiber group are similar in magnitude to estimates of risk associated with long fibers in the regulated fraction of airborne asbestos fibers. Rate ratio estimates for longer fibers are larger than those for shorter fibers, but thicker and thinner fibers do not differ as the toxicologically derived prior had expected. Credible intervals for fiber size-specific risk estimates overlap; thus, we cannot conclude that there are substantial differences in effect by fiber size. Nonetheless, our results suggest that some unregulated asbestos fibers may be associated with increased incidence of lung cancer.

Management and characteristics of recycled manure solids used for bedding in Midwest freestall dairy herds.

PubMed

Husfeldt, A W; Endres, M I; Salfer, J A; Janni, K A

2012-04-01

Interest in using recycled manure solids (RMS) as a bedding material for dairy cows has grown in the US Midwest. Cost of common bedding materials has increased in recent years and availability has decreased. Information regarding the composition of RMS and its use as a bedding material for dairy cows in the Midwest is very limited. The objectives of this study were to characterize RMS as a bedding material, observe bedding management practices, document methods of obtaining RMS, and describe housing facilities. We visited 38 Midwest dairy operations bedding freestalls with RMS to collect data. Methods of obtaining RMS for bedding included separation of anaerobic digested manure, separation of raw manure, and separation of raw manure followed by mechanical drum-composting for 18 to 24 h. Average bedding moisture of unused RMS was 72.4% with a pH of 9.16. Unused samples contained (on a dry basis) 1.4% N, 44.9% C, 32.7C:N ratio, 0.44% P, 0.70% K, 76.5% neutral detergent fiber, 9.4% ash, 4.4% nonfiber carbohydrates, and 1.1% fat. Moisture was lowest for drum-composted solids before and after use as freestall bedding. After use in the stalls, digested solids had lower neutral detergent fiber content (70.5%) than drum-composted (75.0%) and separated raw (73.1%) solids. Total N content was greater in digested solids (2.0%) than in separated raw (1.7%) solids. Total bacterial populations in unused bedding were greatest in separated raw manure solids but were similar between digested and drum-composted manure solids. Drum-composted manure solids had no coliform bacteria before use as freestall bedding. After use as bedding, digested manure solids had lower total bacteria counts compared with drum-composted and separated raw manure solids, which had similar counts. Used bedding samples of digested solids contained fewer environmental streptococci than drum-composted and separated raw solids and had reduced Bacillus counts compared with separated raw solids. Coliform counts were similar for all 3 bedding sources. Addition of a mechanical blower post-separation and use of a shelter for storage were associated with reduced fresh-bedding moisture but not associated with bacterial counts. This was the first survey of herds using RMS for bedding in the Midwest. We learned that RMS was being used successfully as a source of bedding for dairy cows. For most farms in the study, somatic cell count was comparable to the average in the region and not excessively high. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

High voltage spark carbon fiber detection system

NASA Technical Reports Server (NTRS)

Yang, L. C.

1980-01-01

The pulse discharge technique was used to determine the length and density of carbon fibers released from fiber composite materials during a fire or aircraft accident. Specifications are given for the system which uses the ability of a carbon fiber to initiate spark discharge across a high voltage biased grid to achieve accurate counting and sizing of fibers. The design of the system was optimized, and prototype hardware proved satisfactory in laboratory and field tests.

Lung asbestos burden in shipyard and construction workers with mesothelioma: Comparison with burdens in subjects with asbestosis of lung cancer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Warnock, M.L.

1989-10-01

Although mesothelioma is generally considered to be caused by asbestos, epidemiologic studies indicate that some cases have another cause. In order to determine whether pulmonary asbestos burden can be used to define asbestos-related mesotheliomas, asbestos burden was quantified in 27 shipyard or construction workers with diffuse malignant mesothelioma of the pleura or peritoneum and a history of asbestos exposure. Their burden was significantly greater than the burden found in 19 unexposed men. The burdens were also compared to those of previously reported subjects with asbestosis or lung cancer. The median concentration for total amphibole fibers (2.7 million/g dry lung) inmore » subjects with mesothelioma did not differ significantly from our previously reported median values for 14 subjects with asbestosis (1.3 million/g dry lung) or for 60 asbestos workers with lung cancer (1.3 million/g dry lung). Fiber size distribution for amosite, the most prevalent fiber type, was similar in all three subject groups. Fifteen of 25 (60%) subjects with mesothelioma had mild asbestosis. Asbestos body (AB) concentrations were {ge} 1900/g dry lung, and total amphibole fiber concentrations were {ge}390,000/g dry lung. Counts of ABs{ge}0.5/cm{sup 2} in histologic sections always signified both of these concentrations in extracts. Thus, histologic sections showing {ge}0.5 ABs/cm{sup 2} or extracts containing asbestos body or amphibole fiber concentrations of at least 1900 or 390,000/g dry lung, respectively, will confirm an asbestos related mesothelioma.« less

Effect of packaging materials on the chemical composition and microbiological quality of edible mushroom (Pleurotus ostreatus) grown on cassava peels.

PubMed

Ajayi, Oluwakemi; Obadina, Adewale; Idowu, Micheal; Adegunwa, Mojisola; Kajihausa, Olatundun; Sanni, Lateef; Asagbra, Yemisi; Ashiru, Bolanle; Tomlins, Keith

2015-07-01

Edible fungi such as mushrooms are highly perishable and deteriorate few days after harvest due to its high moisture content and inability to maintain their physiological status. In this study, the effect of packaging materials on the nutritional composition of mushroom cultivated from cassava peels was investigated. Mushroom samples were dried at 50°C in a cabinet dryer for 8 h. The dried mushroom samples packaged in four different packaging materials; high density polyethylene (HDPE), polypropylene (PP), laminated aluminum foil (LAF), high density polyethylene under vacuum (HDPEV) were stored at freezing (0°C) temperatures for 12 weeks. Samples were collected at 2-week intervals and analyzed for proximate composition (carbohydrate, protein, fat, fiber, ash, moisture), mineral content (calcium, potassium), vitamin C content, and microbiological qualities (total aerobic count, Pseudomonal count, Coliform count, Staphylococcal count, Salmonella count) using the standard laboratory procedures. Carbohydrate, protein, fat content of dried mushrooms packaged in HDPE at freezing temperature ranged from 45.2% to 53.5%, 18.0% to 20.3%, and 3.2% to 4.3%, while mushrooms in polypropylene ranged from 45.2% to 53.5%, 18.5% to 20.3%, 2.6% to 4.3%. Carbohydrate, protein, fat of mushroom in LAF ranged from 47.8% to 53.5%, 17.3% to 20.3%, and 3.3% to 4.3%, respectively, while carbohydrate, protein, fat of mushroom in HDPEV ranged from 51.1% to 53.5%, 19.5% to 20.3%, and 3.5% to 4.3%. Microbiological analysis showed that total aerobic count, Pseudomonal count, and Staphyloccocal count of dried mushroom ranged from 2.3 to 3.8 log cfu/g, 0.6 to 1.1 log cfu/g, and 0.4 to 0.5 log cfu/g, respectively. In conclusion, dried mushroom in HDPE packaged under vacuum at freezing temperature retained the nutritional constituents than those packaged with other packaging materials.

Effect of packaging materials on the chemical composition and microbiological quality of edible mushroom (Pleurotus ostreatus) grown on cassava peels

PubMed Central

Ajayi, Oluwakemi; Obadina, Adewale; Idowu, Micheal; Adegunwa, Mojisola; Kajihausa, Olatundun; Sanni, Lateef; Asagbra, Yemisi; Ashiru, Bolanle; Tomlins, Keith

2015-01-01

Edible fungi such as mushrooms are highly perishable and deteriorate few days after harvest due to its high moisture content and inability to maintain their physiological status. In this study, the effect of packaging materials on the nutritional composition of mushroom cultivated from cassava peels was investigated. Mushroom samples were dried at 50°C in a cabinet dryer for 8 h. The dried mushroom samples packaged in four different packaging materials; high density polyethylene (HDPE), polypropylene (PP), laminated aluminum foil (LAF), high density polyethylene under vacuum (HDPEV) were stored at freezing (0°C) temperatures for 12 weeks. Samples were collected at 2-week intervals and analyzed for proximate composition (carbohydrate, protein, fat, fiber, ash, moisture), mineral content (calcium, potassium), vitamin C content, and microbiological qualities (total aerobic count, Pseudomonal count, Coliform count, Staphylococcal count, Salmonella count) using the standard laboratory procedures. Carbohydrate, protein, fat content of dried mushrooms packaged in HDPE at freezing temperature ranged from 45.2% to 53.5%, 18.0% to 20.3%, and 3.2% to 4.3%, while mushrooms in polypropylene ranged from 45.2% to 53.5%, 18.5% to 20.3%, 2.6% to 4.3%. Carbohydrate, protein, fat of mushroom in LAF ranged from 47.8% to 53.5%, 17.3% to 20.3%, and 3.3% to 4.3%, respectively, while carbohydrate, protein, fat of mushroom in HDPEV ranged from 51.1% to 53.5%, 19.5% to 20.3%, and 3.5% to 4.3%. Microbiological analysis showed that total aerobic count, Pseudomonal count, and Staphyloccocal count of dried mushroom ranged from 2.3 to 3.8 log cfu/g, 0.6 to 1.1 log cfu/g, and 0.4 to 0.5 log cfu/g, respectively. In conclusion, dried mushroom in HDPE packaged under vacuum at freezing temperature retained the nutritional constituents than those packaged with other packaging materials. PMID:26288720

Enrichment of probiotic ice cream with different dietary fibers: Structural characteristics and culture viability.

PubMed

Akalın, A S; Kesenkas, H; Dinkci, N; Unal, G; Ozer, E; Kınık, O

2018-01-01

This study evaluated the effect of 5 dietary fibers (apple, orange, oat, bamboo, and wheat) on the physicochemical, rheological, and textural characteristics; sensory properties; and culture viability of probiotic ice cream stored at -18°C for 180 d. The presence of orange and apple fibers increased the titratable acidity, decreased the lightness (color) value of the ice creams, and enhanced the red and yellow coloration. Compared with the control sample, the consistency indices and apparent viscosities of the experimental samples increased with the addition of all dietary fibers except oat fiber. The highest viscosity was obtained in the sample fortified with apple fiber, whereas the ice cream containing orange fiber showed the highest hardness after d 60 of storage. The addition of orange and apple fibers significantly increased melting resistance; however, panelists did not generally like these samples in terms of taste-flavor. All ice creams had viable counts of Lactobacillus acidophilus of ≥7 log cfu/g during storage except the samples with orange and bamboo fiber. Bifidobacterium lactis counts were also found to be >6 log cfu/g in those samples until d 150 of storage. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Integrated four-channel all-fiber up-conversion single-photon-detector with adjustable efficiency and dark count.

PubMed

Zheng, Ming-Yang; Shentu, Guo-Liang; Ma, Fei; Zhou, Fei; Zhang, Hai-Ting; Dai, Yun-Qi; Xie, Xiuping; Zhang, Qiang; Pan, Jian-Wei

2016-09-01

Up-conversion single photon detector (UCSPD) has been widely used in many research fields including quantum key distribution, lidar, optical time domain reflectrometry, and deep space communication. For the first time in laboratory, we have developed an integrated four-channel all-fiber UCSPD which can work in both free-running and gate modes. This compact module can satisfy different experimental demands with adjustable detection efficiency and dark count. We have characterized the key parameters of the UCSPD system.

Comparison of multi-fiber reproducibility of PAS-MRI and Q-ball with empirical multiple b-value HARDI

NASA Astrophysics Data System (ADS)

Nath, Vishwesh; Schilling, Kurt G.; Blaber, Justin A.; Ding, Zhaohua; Anderson, Adam W.; Landman, Bennett A.

2017-02-01

Crossing fibers are prevalent in human brains and a subject of intense interest for neuroscience. Diffusion tensor imaging (DTI) can resolve tissue orientation but is blind to crossing fibers. Many advanced diffusion-weighted magnetic resolution imaging (MRI) approaches have been presented to extract crossing-fibers from high angular resolution diffusion imaging (HARDI), but the relative sensitivity and specificity of approaches remains unclear. Here, we examine two leading approaches (PAS and q-ball) in the context of a large-scale, single subject reproducibility study. A single healthy individual was scanned 11 times with 96 diffusion weighted directions and 10 reference volumes for each of five b-values (1000, 1500, 2000, 2500, 3000 s/mm2) for a total of 5830 volumes (over the course of three sessions). We examined the reproducibility of the number of fibers per voxel, volume fraction, and crossing-fiber angles. For each method, we determined the minimum resolvable angle for each acquisition. Reproducibility of fiber counts per voxel was generally high ( 80% consensus for PAS and 70% for q-ball), but there was substantial bias between individual repetitions and model estimated with all data ( 10% lower consensus for PAS and 15% lower for q-ball). Both PAS and q-ball predominantly discovered fibers crossing at near 90 degrees, but reproducibility was higher for PAS across most measures. Within voxels with low anisotropy, q-ball finds more intra-voxel structure; meanwhile, PAS resolves multiple fibers at greater than 75 degrees for more voxels. These results can inform researchers when deciding between HARDI approaches or interpreting findings across studies.

Development of a wavelength-separated type scintillator with optical fiber (SOF) dosimeter to compensate for the Cerenkov radiation effect.

PubMed

Ishikawa, Masayori; Nagase, Naomi; Matsuura, Taeko; Hiratsuka, Junichi; Suzuki, Ryusuke; Miyamoto, Naoki; Sutherland, Kenneth Lee; Fujita, Katsuhisa; Shirato, Hiroki

2015-03-01

The scintillator with optical fiber (SOF) dosimeter consists of a miniature scintillator mounted on the tip of an optical fiber. The scintillator of the current SOF dosimeter is a 1-mm diameter hemisphere. For a scintillation dosimeter coupled with an optical fiber, measurement accuracy is influenced by signals due to Cerenkov radiation in the optical fiber. We have implemented a spectral filtering technique for compensating for the Cerenkov radiation effect specifically for our plastic scintillator-based dosimeter, using a wavelength-separated counting method. A dichroic mirror was used for separating input light signals. Individual signal counting was performed for high- and low-wavelength light signals. To confirm the accuracy, measurements with various amounts of Cerenkov radiation were performed by changing the incident direction while keeping the Ir-192 source-to-dosimeter distance constant, resulting in a fluctuation of <5%. Optical fiber bending was also addressed; no bending effect was observed for our wavelength-separated SOF dosimeter. © The Author 2015. Published by Oxford University Press on behalf of The Japan Radiation Research Society and Japanese Society for Radiation Oncology.

A time-domain fluorescence diffusion optical tomography system for breast tumor diagnosis

NASA Astrophysics Data System (ADS)

Zhang, Wei; Gao, Feng; Wu, LinHui; Ma, Wenjuan; Yang, Fang; Zhou, Zhongxing; Zhang, Limin; Zhao, Huijuan

2011-02-01

A prototype time-domain fluorescence diffusion optical tomography (FDOT) system using near-infrared light is presented. The system employs two pulsed light sources, 32 source fibers and 32 detection channels, working separately for acquiring the temporal distribution of the photon flux on the tissue surface. The light sources are provided by low power picosecond pulsed diode lasers at wavelengths of 780 nm and 830 nm, and a 1×32-fiber-optic-switch sequentially directs light sources to the object surface through 32 source fibers. The light signals re-emitted from the object are collected by 32 detection fibers connected to four 8×1 fiber-optic-switch and then routed to four time-resolved measuring channels, each of which consists of a collimator, a filter wheel, a photomultiplier tube (PMT) photon-counting head and a time-correlated single photon counting (TCSPC) channel. The performance and efficacy of the designed multi-channel PMT-TCSPC system are assessed by reconstructing the fluorescent yield and lifetime images of a solid phantom.

Potential artifacts associated with historical preparation of joint compound samples and reported airborne asbestos concentrations.

PubMed

Brorby, G P; Sheehan, P J; Berman, D W; Bogen, K T; Holm, S E

2011-05-01

Airborne samples collected in the 1970s for drywall workers using asbestos-containing joint compounds were likely prepared and analyzed according to National Institute of Occupational Safety and Health Method P&CAM 239, the historical precursor to current Method 7400. Experimentation with a re-created, chrysotile-containing, carbonate-based joint compound suggested that analysis following sample preparation by the historical vs. current method produces different fiber counts, likely because of an interaction between the different clearing and mounting chemicals used and the carbonate-based joint compound matrix. Differences were also observed during analysis using Method 7402, depending on whether acetic acid/dimethylformamide or acetone was used during preparation to collapse the filter. Specifically, air samples of sanded chrysotile-containing joint compound prepared by the historical method yielded fiber counts significantly greater (average of 1.7-fold, 95% confidence interval: 1.5- to 2.0-fold) than those obtained by the current method. In addition, air samples prepared by Method 7402 using acetic acid/dimethylformamide yielded fiber counts that were greater (2.8-fold, 95% confidence interval: 2.5- to 3.2-fold) than those prepared by this method using acetone. These results indicated (1) there is an interaction between Method P&CAM 239 preparation chemicals and the carbonate-based joint compound matrix that reveals fibers that were previously bound in the matrix, and (2) the same appeared to be true for Method 7402 preparation chemicals acetic acid/dimethylformamide. This difference in fiber counts is the opposite of what has been reported historically for samples of relatively pure chrysotile dusts prepared using the same chemicals. This preparation artifact should be considered when interpreting historical air samples for drywall workers prepared by Method P&CAM 239. Copyright © 2011 JOEH, LLC

Gross beta determination in drinking water using scintillating fiber array detector.

PubMed

Lv, Wen-Hui; Yi, Hong-Chang; Liu, Tong-Qing; Zeng, Zhi; Li, Jun-Li; Zhang, Hui; Ma, Hao

2018-04-04

A scintillating fiber array detector for measuring gross beta counting is developed to monitor the real-time radioactivity in drinking water. The detector, placed in a stainless-steel tank, consists of 1096 scintillating fibers, both sides of which are connected to a photomultiplier tube. The detector parameters, including working voltage, background counting rate and stability, are tested, and the detection efficiency is calibrated using standard potassium chloride solution. Water samples are measured with the detector and the results are compared with those by evaporation method. The results show consistency with those by evaporation method. The background counting rate of the detector is 38.131 ± 0.005 cps, and the detection efficiency for β particles is 0.37 ± 0.01 cps/(Bq/l). The MDAC of this system can be less than 1.0 Bq/l for β particles in 120 min without pre-concentration. Copyright © 2018 Elsevier Ltd. All rights reserved.

Effects of different sources of fructans on body weight, blood metabolites and fecal bacteria in normal and obese non-diabetic and diabetic rats.

PubMed

Rendón-Huerta, Juan A; Juárez-Flores, Bertha; Pinos-Rodríguez, Juan M; Aguirre-Rivera, J Rogelio; Delgado-Portales, Rosa E

2012-03-01

Fructans contribute significantly to dietary fiber with beneficial effects on gastrointestinal physiology in healthy individuals and offer a promising approach to treating some diseases. Two experiments (Experiment 1 = rats with normal weight; Experiment 2 = obese rats) were developed to compare the effects of three fructan sources (Cichorium intybus L. Asteraceae, Helianthus tuberosus L. Asteraceae and Agave angustifolia ssp. tequilana Haw, Agavaceae) on body weight change, blood metabolites and fecal bacteria in non-diabetic (ND) and diabetic (D) rats. In Experiment 1 total body weight gain and daily feed intake in D and ND rats decreased (P < 0.05) with supplements of fructan. Only in D rats, blood glucose concentrations, fecal Clostrodium spp. counts, and liver steatosis decreased, while blood HDL concentrations and fecal Lactobacillus spp. and Bifidobacterium spp. counts increased due to fructans. In Experiment 2, total body weight gain and feed intake in ND and D rats were also decreased by fructans. In ND rats, fructan decreased blood glucose concentrations. In D rats, fructans from A. angustifolia ssp. tequilana decreased blood cholesterol and LDL and liver steatosis. For both ND and D rats, fecal Lactobacillus spp. and Bifidobacterium spp. counts were higher (P < 0.05) with fructan supplements.

Effect of crosstalk on QBER in QKD in urban telecommunication fiber lines

NASA Astrophysics Data System (ADS)

Kurochkin, Vladimir L.; Kurochkin, Yuriy V.; Miller, Alexander V.; Sokolov, Alexander S.; Kanapin, Alan A.

2016-12-01

Quantum key distribution (QKD) as a technology is being actively implemented into existing urban telecommunication networks. QKD devices are commercially available products. While sending single photons through optical fiber, adjacent fibers, which are used to transfer classical information, might influence the amount of registrations of single photon detectors. This influence is registered, since it directly introduces a higher quantum bit error rate (QBER) into the final key [1-3]. Our report presents the results of the first tests of the QKD device, developed in the Russian Quantum Center. These tests were conducted in Moscow, and are the first of such a device in Russia in urban optical fiber telecommunication networks. The device in question is based on a two-pass auto-compensating optical scheme, which provides stable single photon transfer through urban optical fiber telecommunication networks [4,5]. The single photon detectors ID230 by ID Quantique were used. They operate in free-running mode, and with a quantum effectiveness of 10 % have a dark count 10 Hz. The background signal level in the dedicated fiber was no less than 5.6•10-14 W, which corresponds to 4.4•104 detector clicks per second. The single mode fiber length in Moscow was 30.6 km, the total attenuation equal to 11.7 dB. The sifted quantum key bit rate reached values of 1.9 kbit/s with the QBER level equal to 5.1 %. Methods of lowering the influence of crosstalk on the QBER are considered.

Radiographic and magnetic resonance imaging predicts severity of cruciate ligament fiber damage and synovitis in dogs with cranial cruciate ligament rupture

PubMed Central

Racette, Molly A.; Hans, Eric C.; Volstad, Nicola J.; Holzman, Gerianne; Bleedorn, Jason A.; Schaefer, Susan L.; Waller, Kenneth R.; Hao, Zhengling; Block, Walter F.

2017-01-01

Cruciate ligament rupture (CR) and associated osteoarthritis (OA) is a common condition in dogs. Dogs frequently develop a second contralateral CR. This study tested the hypothesis that the degree of stifle synovitis and cranial cruciate ligament (CrCL) matrix damage in dogs with CR is correlated with non-invasive diagnostic tests, including magnetic resonance (MR) imaging. We conducted a prospective cohort study of 29 client-owned dogs with an unstable stifle due to complete CR and stable contralateral stifle with partial CR. We evaluated correlation of stifle synovitis and CrCL fiber damage with diagnostic tests including bilateral stifle radiographs, 3.0 Tesla MR imaging, and bilateral stifle arthroscopy. Histologic grading and immunohistochemical staining for CD3+ T lymphocytes, TRAP+ activated macrophages and Factor VIII+ blood vessels in bilateral stifle synovial biopsies were also performed. Serum and synovial fluid concentrations of C-reactive protein (CRP) and carboxy-terminal telopeptide of type I collagen (ICTP), and synovial total nucleated cell count were determined. Synovitis was increased in complete CR stifles relative to partial CR stifles (P<0.0001), although total nucleated cell count in synovial fluid was increased in partial CR stifles (P<0.01). In partial CR stifles, we found that 3D Fast Spin Echo Cube CrCL signal intensity was correlated with histologic synovitis (SR = 0.50, P<0.01) and that radiographic OA was correlated with CrCL fiber damage assessed arthroscopically (SR = 0.61, P<0.001). Taken together, results of this study show that clinical diagnostic tests predict severity of stifle synovitis and cruciate ligament matrix damage in stable partial CR stifles. These data support use of client-owned dogs with unilateral complete CR and contralateral partial CR as a clinical trial model for investigation of disease-modifying therapy for partial CR. PMID:28575001

Radiographic and magnetic resonance imaging predicts severity of cruciate ligament fiber damage and synovitis in dogs with cranial cruciate ligament rupture.

PubMed

Sample, Susannah J; Racette, Molly A; Hans, Eric C; Volstad, Nicola J; Holzman, Gerianne; Bleedorn, Jason A; Schaefer, Susan L; Waller, Kenneth R; Hao, Zhengling; Block, Walter F; Muir, Peter

2017-01-01

Cruciate ligament rupture (CR) and associated osteoarthritis (OA) is a common condition in dogs. Dogs frequently develop a second contralateral CR. This study tested the hypothesis that the degree of stifle synovitis and cranial cruciate ligament (CrCL) matrix damage in dogs with CR is correlated with non-invasive diagnostic tests, including magnetic resonance (MR) imaging. We conducted a prospective cohort study of 29 client-owned dogs with an unstable stifle due to complete CR and stable contralateral stifle with partial CR. We evaluated correlation of stifle synovitis and CrCL fiber damage with diagnostic tests including bilateral stifle radiographs, 3.0 Tesla MR imaging, and bilateral stifle arthroscopy. Histologic grading and immunohistochemical staining for CD3+ T lymphocytes, TRAP+ activated macrophages and Factor VIII+ blood vessels in bilateral stifle synovial biopsies were also performed. Serum and synovial fluid concentrations of C-reactive protein (CRP) and carboxy-terminal telopeptide of type I collagen (ICTP), and synovial total nucleated cell count were determined. Synovitis was increased in complete CR stifles relative to partial CR stifles (P<0.0001), although total nucleated cell count in synovial fluid was increased in partial CR stifles (P<0.01). In partial CR stifles, we found that 3D Fast Spin Echo Cube CrCL signal intensity was correlated with histologic synovitis (SR = 0.50, P<0.01) and that radiographic OA was correlated with CrCL fiber damage assessed arthroscopically (SR = 0.61, P<0.001). Taken together, results of this study show that clinical diagnostic tests predict severity of stifle synovitis and cruciate ligament matrix damage in stable partial CR stifles. These data support use of client-owned dogs with unilateral complete CR and contralateral partial CR as a clinical trial model for investigation of disease-modifying therapy for partial CR.

Quantum Dots Microstructured Optical Fiber for X-Ray Detection

NASA Technical Reports Server (NTRS)

DeHaven, Stan; Williams, Phillip; Burke, Eric

2015-01-01

Microstructured optical fibers containing quantum dots scintillation material comprised of zinc sulfide nanocrystals doped with magnesium sulfide are presented. These quantum dots are applied inside the microstructured optical fibers using capillary action. The x-ray photon counts of these fibers are compared to the output of a collimated CdTe solid state detector over an energy range from 10 to 40 keV. The results of the fiber light output and associated effects of an acrylate coating and the quantum dot application technique are discussed.

In situ microscopic analysis of asbestos and synthetic vitreous fibers retained in hamster lungs following inhalation.

PubMed

Rogers, R A; Antonini, J M; Brismar, H; Lai, J; Hesterberg, T W; Oldmixon, E H; Thevenaz, P; Brain, J D

1999-05-01

Hamsters breathed, nose-only, for 13 weeks, 5 days/week, 6 hr/day, either man-made vitreous fiber (MMVF)10a, MMVF33, or long amosite asbestos at approximately 300 World Health Organization (WHO) fibers/cc or long amosite at 25 WHO fibers/cc. [World Health Organization fibers are longer than 5 microm and thicker than 3 microm, with aspect ratio >3.] After sacrifice, fiber burden was estimated (left lungs) by ashing and scanning electron microscopy (ashing/SEM) or (right middle lobes) by confocal laser scanning microscopy (CLSM) in situ. In situ CLSM also provided three-dimensional views of fibers retained, undisturbed, in lung tissue. Fibers of each type were lodged in alveoli and small airways, especially at airway bifurcations, and were seen fully or partly engulfed by alveolar macrophages. Amosite fibers penetrated into and through alveolar septa. Length densities of fibers in parenchyma (total length of fiber per unit volume of lung) were estimated stereologically from fiber transsections counted on two-dimensional optical sections and were 30.5, 25.3, 20.0, and 81.6 mm/mm3 for MMVF10a, MMVF33, and low- and high-dose amosite, respectively. Lengths of individual fibers were measured in three dimensions by tracking individual fibers through series of optical sections. Length distributions of amosite fibers aerosolized, but before inhalation versus after retention in the lung were similar, whether determined by ashing/SEM or in situ CLSM. In contrast, the fraction of short MMVF10a and MMVF33 fibers increased and the geometric mean fiber lengths of both MMVFs decreased by approximately 60% during retention. Most likely due to fiber deposition pattern and differences in sampling, fiber burdens [MMVF10a, MMVF33, and amosite (high dose; 269 WHO fibers/cc)] determined by ashing/SEM were 1.4, 1. 5, and 3.5 times greater, respectively, than those calculated from in situ CLSM data. In situ CLSM is able to provide detailed information about the anatomic sites of fiber retention and also fiber lengths and burdens in good agreement with ashing/SEM results.

High-voltage spark carbon-fiber sticky-tape data analyzer

NASA Technical Reports Server (NTRS)

Yang, L. C.; Hull, G. G.

1980-01-01

An efficient method for detecting carbon fibers collected on a stick tape monitor was developed. The fibers were released from a simulated crash fire situation containing carbon fiber composite material. The method utilized the ability of the fiber to initiate a spark across a set of alternately biased high voltage electrodes to electronically count the number of fiber fragments collected on the tape. It was found that the spark, which contains high energy and is of very short duration, is capable of partially damaging or consuming the fiber fragments. It also creates a mechanical disturbance which ejects the fiber from the grid. Both characteristics were helpful in establishing a single discharge pulse for each fiber segment.

Influence of lignocellulose and low or high levels of sugar beet pulp on nutrient digestibility and the fecal microbiota in dogs.

PubMed

Kröger, S; Vahjen, W; Zentek, J

2017-04-01

Lignocellulose is an alternative fiber source for dogs; however, it has not yet been studied as a feed ingredient for the nutrition of dogs. Eight adult Beagles were involved in the study, which consisted of 3 feeding periods of 8 to 12 wk each. All dogs received 3 different diets, which either had the same concentration of fiber sources (2.7% sugar beet pulp or lignocellulose) or were formulated for a similar concentration of approximately 3% crude fiber: 12% sugar beet pulp (highSBP; 3.1% crude fiber), 2.7% sugar beet pulp (lowSBP; 0.96% crude fiber), or 2.7% lignocellulose (LC; 2.4% crude fiber). Feces samples were collected at the end of each feeding period, and the apparent nutrient digestibility, daily amount, and DM content of feces and fecal cell numbers of relevant bacteria were analyzed. The daily feces amount was lower and the feces DM was higher when dogs were fed the LC diet and the lowSBP diet compared with the highSBP diet ( < 0.001). Apparent digestibility of CP, Na, and K was highest with the lowSBP diet followed by the LC and highSBP diets ( < 0.001). After feeding LC, the bacterial cell counts of spp., spp., and the cluster were reduced compared with feeding highSBP and even more reduced after feeding lowSBP ( < 0.001). The bacterial cell count of the cluster was lower in LC and lowSBP compared with highSBP ( < 0.001). The feces of dogs fed LC and lowSBP had lower concentrations of acetate ( < 0.001), propionate ( < 0.001), -butyrate ( = 0.015), total fatty acids ( < 0.001), and lactate ( < 0.001) compared with dogs fed highSBP. The concentration of -butyrate was higher in the feces of dogs fed with LC compared with dogs fed high and low sugar beet pulp (SBP; < 0.001). The pH of the feces of the LC-fed dogs was highest followed by lowSBP- and highSBP-fed dogs ( < 0.001). Depending on the concentration, the use of LC and SBP as fiber sources in dog feed has different impacts on the fecal microbiota and the apparent digestibility of nutrients. Therefore, different areas of application should be considered.

Release of metronidazole from electrospun poly(L-lactide-co-D/L-lactide) fibers for local periodontitis treatment.

PubMed

Reise, Markus; Wyrwa, Ralf; Müller, Ulrike; Zylinski, Matthias; Völpel, Andrea; Schnabelrauch, Matthias; Berg, Albrecht; Jandt, Klaus D; Watts, David C; Sigusch, Bernd W

2012-02-01

We aimed to achieve detailed biomaterials characterization of a drug delivery system for local periodontitis treatment based on electrospun metronidazole-loaded resorbable polylactide (PLA) fibers. PLA fibers loaded with 0.1-40% (w/w) MNA were electrospun and were characterized by SEM and DSC. HPLC techniques were used to analyze the release profiles of metronidazole (MNA) from these fibers. The antibacterial efficacy was determined by measuring inhibition zones of drug-containing aliquots from the same electrospun fiber mats in an agar diffusion test. Three pathogenic periodontal bacterial strains: Fusobacterium nucleatum, Aggregatibacter actinomycetemcomitans and Porphyromonas gingivalis were studied. Cytotoxicity testing was performed with human gingival fibroblasts by: (i) counting viable cells via live/dead staining methods and (ii) by exposing cells directly onto the surface of MNA-loaded fibers. MNA concentration influenced fiber diameters and thus w/w surface areas: diameter being minimal and area maximal at 20% MNA. HPLC showed that these 20% MNA fibers had the fastest initial MNA release. From the third day, MNA release was slower and nearly linear with time. All fiber mats released 32-48% of their total drug content within the first 7 days. Aliquots of media taken from the fiber mats inhibited the growth of all three bacterial strains. MNA released up to the 28th day from fiber mats containing 40% MNA significantly decreased the viability of F. nucleatum and P. gingivalis and up to the 2nd day also for the resistant A. actinomycetemcomitans. All of the investigated fibers and aliquots showed excellent cytocompatibility. This study shows that MNA-loaded electrospun fiber mats represent an interesting class of resorbable drug delivery systems. Sustained drug release properties and cytocompatibility suggest their potential clinical applicability for the treatment of periodontal diseases. Copyright © 2011 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Fiber-coupled superconducting nanowire single-photon detectors integrated with a bandpass filter on the fiber end-face

NASA Astrophysics Data System (ADS)

Zhang, W. J.; Yang, X. Y.; Li, H.; You, L. X.; Lv, C. L.; Zhang, L.; Zhang, C. J.; Liu, X. Y.; Wang, Z.; Xie, X. M.

2018-07-01

Superconducting nanowire single-photon detectors (SNSPDs) with both high system detection efficiency (SDE) and low dark count rate (DCR) play significant roles in quantum information processes and various applications. The background dark counts of SNSPDs originate from the room temperature blackbody radiation coupled to the device via a fiber. Therefore, a bandpass filter (BPF) operated at low temperature with minimal insert loss is necessary to suppress the background DCR. Herein, a low-loss BPF integrated on a single-mode fiber end-face was designed, fabricated and verified for the low temperature implement. The fiber end-face BPF was featured with a typical passband width about 40 nm in the 1550 nm telecom band and a peak transmittance of over 0.98. SNSPD with high SDE fabricated on a distributed Bragg reflector was coupled to the BPF. The device with such a BPF showed an SDE of 80% at a DCR of 0.5 Hz, measured at 2.1 K. Compared the same device without a BPF, the DCR was reduced by over 13 dB with an SDE decrease of <3%.

Chrysotile in water

PubMed Central

Speil, Sidney

1974-01-01

The problems of quantitating chrysotile in water by fiber count techniques are reviewed briefly and the use of mass quantitation is suggested as a preferable measure. Chrysotile fiber has been found in almost every sample of natural water examined, but generally transmission electron miscroscopy (TEM) is required because of the small diameters involved. The extreme extrapolation required in mathematically converting a few fibers or fiber fragments under the TEM to the fiber content of a liquid sample casts considerable doubt on the validity of numbers used to compare chrysotile contents of different liquids. PMID:4470930

Case Report: Analytical Electron Microscopy of Lung Granulomas Associated with Exposure to Coating Materials Carried by Glass Wool Fibers

PubMed Central

Ferreira, Angela S.; Moreira, Valéria B.; Castro, Marcos César S.; Soares, Porfírio J.; Algranti, Eduardo; Andrade, Leonardo R.

2010-01-01

Context Man-made vitreous fibers (MMVFs) are noncrystalline inorganic fibrous material used for thermal and acoustical insulation (e.g., rock wool, glass wool, glass microfibers, and refractory ceramic fibers). Neither epidemiologic studies of human exposure nor animal studies have shown a noticeable hazardous effect of glass wools on health. However, MMVFs have been anecdotally associated with granulomatous lung disease in several case reports. Case presentation Here, we describe the case of a patient with multiple bilateral nodular opacities who was exposed to glass wool fibers and coating materials for 7 years. Bronchoalveolar lavage fluid revealed an increased total cell count (predominantly macrophages) with numerous cytoplasmic particles. Lung biopsy showed peribronchiolar infiltration of lymphoid cells and many foreign-body–type granulomas. Alveolar macrophages had numerous round and elongated platelike particles inside the cytoplasm. X-ray microanalysis of these particles detected mainly oxygen/aluminum/silicon and oxygen/magnesium/silicon, compatible with kaolinite and talc, respectively. No elemental evidence for glass fibers was found in lung biopsy. Discussion The contribution of analytical electron microscopy applied in the lung biopsy was imperative to confirm the diagnosis of pneumoconiosis associated with a complex occupational exposure that included both MMVFs and coating materials. Relevance to clinical or professional practice This case study points out the possible participation of other components (coating materials), beyond MMVFs, in the etiology of pneumoconiosis. PMID:20123612

Breathing Monitor Using Dye-Doped Optical Fiber

NASA Astrophysics Data System (ADS)

Muto, Shinzo; Fukasawa, Akihiko; Ogawa, Takayuki; Morisawa, Masayuki; Ito, Hiroshi

1990-08-01

A new monitoring system of human breathing using umbelliferon dye-doped plastic fiber has been studied. Under UV light pumping, the fiber which was used as a sensor head generates blue fluorescence depending on human expiration. By converting the light signal to electronic pulses, the counting of breathing and real-time monitoring of abnormal breathing such as a heavy cough or a cloggy sputum have easily been obtained.

Comparison of mounting methods for the evaluation of fibers by phase contrast microscopy.

PubMed

Lee, Eun Gyung; Pang, Thomas W S; Nelson, John; Andrew, Mike; Harper, Martin

2011-07-01

The objectives of this study were to evaluate mounting methods for fiber examination of air sample filters by phase contrast microscopy (PCM) and to evaluate differences in fiber counts that might be due to fiber movement. Acetone/triacetin (AT) with various amounts of triacetin and acetone/Euparal (AE) where the mounting medium was placed between the cleared filter wedge and the coverslip were tested as a function of time. Field sample slides collected from a taconite iron-ore processing mill, a tremolitic talc-ore processing mill, and from around a crusher in a meta-basalt stone quarry were prepared with relocatable coverslips to revisit the same field areas on the slides. For each slide, three or four field areas were randomly selected and pictures were taken every 2 weeks to determine any sign of fiber movement over time. For 11 AT slides (named as AT-3.5) prepared with 3.5 μl of the mounting medium according to the NIOSH 7400 method, no fiber movements were detected over 59 weeks. On the other hand, AT slides prepared with larger quantities (10, 15, and 20 μl) of the mounting medium (named as AT-10) and AE slides prepared with ∼10 μl mounting medium showed fiber movement from the eighth day at the earliest. Fiber movement began earlier for the slides mounted with excess triacetin than for those mounted with Euparal. The sample slide storage method, either vertically or horizontally, did not seem to accelerate fiber movement. Additionally, two other modified methods, dimethylformamide solution/Euparal (mDE) and dimethylformamide solution/triacetin (mDT), were also prepared where the mounting medium was placed between the cleared filter wedge and the glass slide. The findings of fiber movements were similar; when 3.5 μl of triacetin was used for the mDT slides, fiber movements were not detected, while fibers on slides prepared with 10 μl triacetin (mDT-10) moved around. No fiber movements were observed for the mDE slides at any time during 59 weeks. Once fiber movement started, fibers moved over distances measured from 4 μm and up to >1000 μm within 22 weeks. However, since then, no further fiber movements have been observed in any field sample slides. Additional sample slides, two Amosite and two chrysotile, were prepared from Union for International Cancer Control (UICC) samples using the AT method with 5 μl triacetin mounting medium. Fiber movements were also observed in these samples; chrysotile fibers began to migrate in 3 weeks, while Amosite fiber movement started after 3 months. Although fiber movement was observed for the AT-10, AE, and mDT-10 sample slides, fiber counts were not significantly different from AT-3.5 and mDE samples that exhibited no fiber movement. Although fiber counts would not be significantly changed by fiber movement, the type and amount of mounting medium for sample slide preparation remains critical for issues such as quality assurance and training of analysts by revisiting the same fibers.

Mechanics of Multifunctional Materials and Microsystems

DTIC Science & Technology

2013-03-07

unlimited 46  Successfully processed the 1st self-healing prepreg in continuous production mode SEM image of E-glass fiber tow (200 count) with 3.3...healing composite with well dispersed microcapsules were fabricated from prepreg . E-glass fiber/epoxy resin Matrix: EPON862/EPIKURE3274

Presence of Tungsten-Containing Fibers in Tungsten Refining and Manufacturing Processes

PubMed Central

Mckernan, John L.; Toraason, Mark A.; Fernback, Joseph E.; Petersen, Martin R.

2009-01-01

In tungsten refining and manufacturing processes, a series of tungsten oxides are typically formed as intermediates in the production of tungsten powder. The present study was conducted to characterize airborne tungsten-containing fiber dimensions, elemental composition and concentrations in the US tungsten refining and manufacturing industry. During the course of normal employee work activities, seven personal breathing zone and 62 area air samples were collected and analyzed using National Institute for Occupational Safety and Health (NIOSH) fiber sampling and counting methods to determine dimensions, composition and airborne concentrations of fibers. Mixed models were used to identify relationships between potential determinants and airborne fiber concentrations. Results from transmission electron microscopy analyses indicated that airborne fibers with length >0.5 μm, diameter >0.01 μm and aspect ratios ≥3:1 were present on 35 of the 69 air samples collected. Overall, the airborne fibers detected had a geometric mean length ≈3 μm and diameter ≈0.3 μm. Ninety-seven percent of the airborne fibers identified were in the thoracic fraction (i.e. aerodynamic diameter ≤ 10 μm). Energy dispersive X-ray spectrometry results indicated that airborne fibers prior to the carburization process consisted primarily of tungsten and oxygen, with other elements being detected in trace quantities. Based on NIOSH fiber counting ‘B’ rules (length > 5 μm, diameter < 3 μm and aspect ratio ≥ 5:1), airborne fiber concentrations ranged from below the limit of detection to 0.085 fibers cm−3, with calcining being associated with the highest airborne concentrations. The mixed model procedure indicated that process temperature had a marginally significant relationship to airborne fiber concentration. This finding was expected since heated processes such as calcining created the highest airborne fiber concentrations. The finding of airborne tungsten-containing fibers in this occupational setting needs to be confirmed in similar settings and demonstrates the need to obtain information on the durability and associated health effects of these fibers. PMID:19126624

Quantitative assessment of vaginal microflora during use of tampons of various compositions.

PubMed Central

Onderdonk, A B; Zamarchi, G R; Rodriguez, M L; Hirsch, M L; Muñoz, A; Kass, E H

1987-01-01

Although the effect of vaginal tampons on the microbial flora during menstruation has recently been studied by several investigators, quantitative effects attributable to particular tampon fibers have received less attention. The purposes of the present study were (i) to determine and then to compare the effects of polyacrylate rayon tampons and viscose rayon tampons on the normal vaginal flora, (ii) to compare quantitative bacterial counts obtained from these tampons with those obtained from concomitant vaginal swabs, and (iii) to determine whether either of these tampon types alters the vaginal microflora when compared with the microflora in the same women using all-cotton tampons or external catamenial pads. Tampon and swab samples were obtained at predetermined times from 18 women for an average of seven menstrual cycles. Samples consisting of swabs from women wearing menstrual pads were compared with swab and tampon samples taken at predetermined times during the menstrual cycle from women using cotton, polyacrylate rayon, or viscose rayon tampons. Samples were analyzed for total aerobic, facultative, and anaerobic bacterial counts. Statistical evaluation of the results indicated that, on the whole, total bacterial counts decreased during menstruation and that the numbers of bacteria in tampons tended to be lower than those in swab samples taken at the same time. The tampon type had little effect on the vaginal microflora. PMID:3435142

In situ microscopic analysis of asbestos and synthetic vitreous fibers retained in hamster lungs following inhalation.

PubMed Central

Rogers, R A; Antonini, J M; Brismar, H; Lai, J; Hesterberg, T W; Oldmixon, E H; Thevenaz, P; Brain, J D

1999-01-01

Hamsters breathed, nose-only, for 13 weeks, 5 days/week, 6 hr/day, either man-made vitreous fiber (MMVF)10a, MMVF33, or long amosite asbestos at approximately 300 World Health Organization (WHO) fibers/cc or long amosite at 25 WHO fibers/cc. [World Health Organization fibers are longer than 5 microm and thicker than 3 microm, with aspect ratio >3.] After sacrifice, fiber burden was estimated (left lungs) by ashing and scanning electron microscopy (ashing/SEM) or (right middle lobes) by confocal laser scanning microscopy (CLSM) in situ. In situ CLSM also provided three-dimensional views of fibers retained, undisturbed, in lung tissue. Fibers of each type were lodged in alveoli and small airways, especially at airway bifurcations, and were seen fully or partly engulfed by alveolar macrophages. Amosite fibers penetrated into and through alveolar septa. Length densities of fibers in parenchyma (total length of fiber per unit volume of lung) were estimated stereologically from fiber transsections counted on two-dimensional optical sections and were 30.5, 25.3, 20.0, and 81.6 mm/mm3 for MMVF10a, MMVF33, and low- and high-dose amosite, respectively. Lengths of individual fibers were measured in three dimensions by tracking individual fibers through series of optical sections. Length distributions of amosite fibers aerosolized, but before inhalation versus after retention in the lung were similar, whether determined by ashing/SEM or in situ CLSM. In contrast, the fraction of short MMVF10a and MMVF33 fibers increased and the geometric mean fiber lengths of both MMVFs decreased by approximately 60% during retention. Most likely due to fiber deposition pattern and differences in sampling, fiber burdens [MMVF10a, MMVF33, and amosite (high dose; 269 WHO fibers/cc)] determined by ashing/SEM were 1.4, 1. 5, and 3.5 times greater, respectively, than those calculated from in situ CLSM data. In situ CLSM is able to provide detailed information about the anatomic sites of fiber retention and also fiber lengths and burdens in good agreement with ashing/SEM results. Images Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7 Figure 8 PMID:10210692

The Effect of Age on Optic Nerve Axon Counts, SDOCT Scan Quality, and Peripapillary Retinal Nerve Fiber Layer Thickness Measurements in Rhesus Monkeys

PubMed Central

Fortune, Brad; Reynaud, Juan; Cull, Grant; Burgoyne, Claude F.; Wang, Lin

2014-01-01

Purpose To evaluate the effect of age on optic nerve axon counts, spectral-domain optical coherence tomography (SDOCT) scan quality, and peripapillary retinal nerve fiber layer thickness (RNFLT) measurements in healthy monkey eyes. Methods In total, 83 healthy rhesus monkeys were included in this study (age range: 1.2–26.7 years). Peripapillary RNFLT was measured by SDOCT. An automated algorithm was used to count 100% of the axons and measure their cross-sectional area in postmortem optic nerve tissue samples (N = 46). Simulation experiments were done to determine the effects of optical changes on measurements of RNFLT. An objective, fully-automated method was used to measure the diameter of the major blood vessel profiles within each SDOCT B-scan. Results Peripapillary RNFLT was negatively correlated with age in cross-sectional analysis (P < 0.01). The best-fitting linear model was RNFLT(μm) = −0.40 × age(years) + 104.5 μm (R2 = 0.1, P < 0.01). Age had very little influence on optic nerve axon count; the result of the best-fit linear model was axon count = −1364 × Age(years) + 1,210,284 (R2 < 0.01, P = 0.74). Older eyes lost the smallest diameter axons and/or axons had an increased diameter in the optic nerve of older animals. There was an inverse correlation between age and SDOCT scan quality (R = −0.65, P < 0.0001). Simulation experiments revealed that approximately 17% of the apparent cross-sectional rate of RNFLT loss is due to reduced scan quality associated with optical changes of the aging eye. Another 12% was due to thinning of the major blood vessels. Conclusions RNFLT declines by 4 μm per decade in healthy rhesus monkey eyes. This rate is approximately three times faster than loss of optic nerve axons. Approximately one-half of this difference is explained by optical degradation of the aging eye reducing SDOCT scan quality and thinning of the major blood vessels. Translational Relevance Current models used to predict retinal ganglion cell losses should be reconsidered. PMID:24932430

Quantum Dots Microstructured Optical Fiber for X-Ray Detection

NASA Technical Reports Server (NTRS)

DeHaven, S. L.; Williams, P. A.; Burke, E. R.

2015-01-01

A novel concept for the detection of x-rays with microstructured optical fibers containing quantum dots scintillation material comprised of zinc sulfide nanocrystals doped with magnesium sulfide is presented. These quantum dots are applied inside the microstructured optical fibers using capillary action. The x-ray photon counts of these fibers are compared to the output of a collimated CdTe solid state detector over an energy range from 10 to 40 keV. The results of the fiber light output and associated effects of an acrylate coating and the quantum dots application technique are discussed.

Fiber optic temperature sensor gives rise to thermal analysis in complex product design

NASA Astrophysics Data System (ADS)

Cheng, Andrew Y. S.; Pau, Michael C. Y.

1996-09-01

A computer-adapted fiber-optic temperature sensing system has been developed which aims to study both the theoretical aspect of fiber temperature sensing and the experimental aspect of such system. The system consists of a laser source, a fiber sensing element, an electronic fringes counting device, and an on-line personal computer. The temperature measurement is achieved by the conventional double beam fringe counting method with optical path length changes in the sensing beam due to the fiber expansion. The system can automatically measure the temperature changes in a sensing fiber arm which provides an insight of the heat generation and dissipation of the measured system. Unlike the conventional measuring devices such as thermocouples or solid state temperature sensors, the fiber sensor can easily be wrapped and shaped to fit the surface of the measuring object or even inside a molded plastic parts such as a computer case, which gives much more flexibility and applicability to the analysis of heat generation and dissipation in the operation of these machine parts. The reference beam is being set up on a temperature controlled optical bench to facilitate high sensitivity and high temperature resolution. The measuring beam has a motorized beam selection device for multiple fiber beam measurement. The project has been demonstrated in the laboratory and the system sensitivity and resolution are found to be as high as 0.01 degree Celsius. It is expected the system will find its application in many design studies which require thermal budgeting.

Time-Optimized High-Resolution Readout-Segmented Diffusion Tensor Imaging

PubMed Central

Reishofer, Gernot; Koschutnig, Karl; Langkammer, Christian; Porter, David; Jehna, Margit; Enzinger, Christian; Keeling, Stephen; Ebner, Franz

2013-01-01

Readout-segmented echo planar imaging with 2D navigator-based reacquisition is an uprising technique enabling the sampling of high-resolution diffusion images with reduced susceptibility artifacts. However, low signal from the small voxels and long scan times hamper the clinical applicability. Therefore, we introduce a regularization algorithm based on total variation that is applied directly on the entire diffusion tensor. The spatially varying regularization parameter is determined automatically dependent on spatial variations in signal-to-noise ratio thus, avoiding over- or under-regularization. Information about the noise distribution in the diffusion tensor is extracted from the diffusion weighted images by means of complex independent component analysis. Moreover, the combination of those features enables processing of the diffusion data absolutely user independent. Tractography from in vivo data and from a software phantom demonstrate the advantage of the spatially varying regularization compared to un-regularized data with respect to parameters relevant for fiber-tracking such as Mean Fiber Length, Track Count, Volume and Voxel Count. Specifically, for in vivo data findings suggest that tractography results from the regularized diffusion tensor based on one measurement (16 min) generates results comparable to the un-regularized data with three averages (48 min). This significant reduction in scan time renders high resolution (1×1×2.5 mm3) diffusion tensor imaging of the entire brain applicable in a clinical context. PMID:24019951

Kernel Regression Estimation of Fiber Orientation Mixtures in Diffusion MRI

PubMed Central

Cabeen, Ryan P.; Bastin, Mark E.; Laidlaw, David H.

2016-01-01

We present and evaluate a method for kernel regression estimation of fiber orientations and associated volume fractions for diffusion MR tractography and population-based atlas construction in clinical imaging studies of brain white matter. This is a model-based image processing technique in which representative fiber models are estimated from collections of component fiber models in model-valued image data. This extends prior work in nonparametric image processing and multi-compartment processing to provide computational tools for image interpolation, smoothing, and fusion with fiber orientation mixtures. In contrast to related work on multi-compartment processing, this approach is based on directional measures of divergence and includes data-adaptive extensions for model selection and bilateral filtering. This is useful for reconstructing complex anatomical features in clinical datasets analyzed with the ball-and-sticks model, and our framework’s data-adaptive extensions are potentially useful for general multi-compartment image processing. We experimentally evaluate our approach with both synthetic data from computational phantoms and in vivo clinical data from human subjects. With synthetic data experiments, we evaluate performance based on errors in fiber orientation, volume fraction, compartment count, and tractography-based connectivity. With in vivo data experiments, we first show improved scan-rescan reproducibility and reliability of quantitative fiber bundle metrics, including mean length, volume, streamline count, and mean volume fraction. We then demonstrate the creation of a multi-fiber tractography atlas from a population of 80 human subjects. In comparison to single tensor atlasing, our multi-fiber atlas shows more complete features of known fiber bundles and includes reconstructions of the lateral projections of the corpus callosum and complex fronto-parietal connections of the superior longitudinal fasciculus I, II, and III. PMID:26691524

Eelgrass slabs, a soilless culture substrate that inhibits adhesion of fungi and oomycetes and enhances antioxidant activity in tomato.

PubMed

Meot-Duros, Laetitia; Le Floch, Gaëtan; Meot, Benoit; Letousey, Patricia; Jacob, Bruno; Barbier, Georges

2011-10-26

Composed of a marine plant, Zostera sp., eelgrass slabs are a novel organic substrate for soilless cultures used in tomato production. The benefit of using eelgrass slabs for growing tomatoes was assessed by comparing it with coconut fiber slabs in regard to contamination by Pythium spp. and to the antioxidant properties of tomato fruits. First, tomato root contamination by Pythium spp. was studied by direct plate counting, and a molecular comparison of fungal and oomycete communities was conducted using PCR-DHPLC. Second, the antioxidant properties of tomato fruits were analyzed by measuring total phenol and carotenoid contents and by evaluating radical scavenging activity. Compared to plants grown on coconut fiber slabs, those on eelgrass slabs presented a lower rate of Pythium spp. root contamination. Moreover, culture on eelgrass slabs produced fruits with better radical scavenging activity and higher total phenol content compared to controls. Carotenoid content was not affected by the type of substrate. This study highlights the value of detrital leaves of Zostera sp. as a substrate for soilless culture that reduces root contamination and also promotes the production of tomato fruits with better nutritional value.

Bioluminescent Reaction by Immobilized Luciferase

NASA Astrophysics Data System (ADS)

Tanaka, Ryuta; Takahama, Eriko; Iinuma, Masataka; Ikeda, Takeshi; Kadoya, Yutaka; Kuroda, Akio

We have investigated an effect of immobilization of luciferase molecules at the optical fiber end on a bioluminescent reaction. The time dependence of measured count rates of emitted photons has been analyzed by fitting with numerical solution of differential equations including the effect of the product-inhibitor and the deactivation of the luciferase. Through the analysis, we have successfully extracted kinetic constants such as, reaction rate, number of active luciferase molecules, etc. Ratio of active molecules to total luciferase molecules in immobilization was one order of magnitude lower than that in solution. The reaction rate of the bioluminescent process was also different from the one of free luciferase in solution.

Where Occupation and Environment Overlap: US Forest Service Worker Exposure to Libby Amphibole Fibers

PubMed Central

Harper, Martin; Butler, Corey; Berry, David; Wroble, Julie

2015-01-01

The National Institute for Occupational Safety and Health (NIOSH) conducted an evaluation of exposures to asbestiform amphibole, known as Libby Amphibole (LA), to personnel from the US Department of Agriculture-Forest Service (USFS) working in the Kootenai National Forest near a former vermiculite mine close to Libby, Montana. LA is associated with vermiculite that was obtained from this mine; mining and processing over many years have resulted in the spread of LA into the surrounding Kootenai Forest where it has been found in tree bark, soil, and forest floor litter. As a result of this and other contamination, Libby and surrounding areas have been designated a “Superfund” site by the US Environmental Protection Agency (EPA). This article describes the application of EPA methods for assessing cancer risks to NIOSH sampling results. Phase-contrast microscopy for airborne asbestos fiber evaluation was found to be less useful than transmission electron microscopy in the presence of interfering organic (plant) fibers. NIOSH Method 7402 was extended by examination of larger areas of the filter, but fiber counts remained low. There are differences between counting rules in NIOSH 7402 and the ISO method used by EPA but these are minor in the context of the uncertainty in concentration estimates from the low counts. Estimates for cancer risk are generally compatible with those previously estimated by the EPA. However, there are limitations to extrapolating these findings of low risk throughout the entire area and to tasks that were not evaluated. PMID:25715191

Where occupation and environment overlap: US Forest Service worker exposure to Libby Amphibole fibers.

PubMed

Harper, Martin; Butler, Corey; Berry, David; Wroble, Julie

2015-01-01

The National Institute for Occupational Safety and Health (NIOSH) conducted an evaluation of exposures to asbestiform amphibole, known as Libby Amphibole (LA), to personnel from the US Department of Agriculture-Forest Service (USFS) working in the Kootenai National Forest near a former vermiculite mine close to Libby, Montana. LA is associated with vermiculite that was obtained from this mine; mining and processing over many years have resulted in the spread of LA into the surrounding Kootenai Forest where it has been found in tree bark, soil, and forest floor litter. As a result of this and other contamination, Libby and surrounding areas have been designated a "Superfund" site by the US Environmental Protection Agency (EPA). This article describes the application of EPA methods for assessing cancer risks to NIOSH sampling results. Phase-contrast microscopy for airborne asbestos fiber evaluation was found to be less useful than transmission electron microscopy in the presence of interfering organic (plant) fibers. NIOSH Method 7402 was extended by examination of larger areas of the filter, but fiber counts remained low. There are differences between counting rules in NIOSH 7402 and the ISO method used by EPA but these are minor in the context of the uncertainty in concentration estimates from the low counts. Estimates for cancer risk are generally compatible with those previously estimated by the EPA. However, there are limitations to extrapolating these findings of low risk throughout the entire area and to tasks that were not evaluated.

Microfluidic flow rate detection based on integrated optical fiber cantilever.

PubMed

Lien, Victor; Vollmer, Frank

2007-10-01

We demonstrate an integrated microfluidic flow sensor with ultra-wide dynamic range, suitable for high throughput applications such as flow cytometry and particle sorting/counting. A fiber-tip cantilever transduces flow rates to optical signal readout, and we demonstrate a dynamic range from 0 to 1500 microL min(-1) for operation in water. Fiber-optic sensor alignment is guided by preformed microfluidic channels, and the dynamic range can be adjusted in a one-step chemical etch. An overall non-linear response is attributed to the far-field angular distribution of single-mode fiber output.

16 CFR 303.43 - Fiber content tolerances.

Code of Federal Regulations, 2010 CFR

2010-01-01

... as to fiber content percentages if the percentages by weight of any fibers present in the total fiber... stated on the label in excess of 3 percent of the total fiber weight of the product. For example, where... fiber present may vary from a minimum of 37 percent of the total fiber weight of such product to a...

Fundamental research on spiking, recovery and understanding seed coat nep counts in AFIS analysis of pre-opened cotton

USDA-ARS?s Scientific Manuscript database

Understanding seed coat fragment (SCF) spiking results in Advanced Fiber Information Systems (AFIS) analysis of seed coat neps (SCN) in ginned cottons was confounded by side processes in the system such as particle crushing that results in inflated recoveries. A high degree of machine (AFIS)-fiber ...

75 FR 75664 - Determination Under the Textile and Apparel Commercial Availability Provision of the Dominican...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-06

.../or staple fiber; textured and/or non- textured). Yarn Size(s): Various. Thread Count (warp): 43 to 56 ends per cm. Thread Count (weft): 29 to 38 filling pics per cm. Weave Type: Woven twill. Fabric Weight...-dyed. Finishing Processes: Napped on both sides. Janet E. Heinzen, Acting Chairman, Committee for the...

Digital pressure transducer for use at high temperatures

DOEpatents

Karplus, Henry H. B.

1981-01-01

A digital pressure sensor for measuring fluid pressures at relatively high temperatures includes an electrically conducting fiber coupled to the fluid by a force disc that causes tension in the fiber to be a function of fluid pressure. The tension causes changes in the mechanical resonant frequency of the fiber, which is caused to vibrate in a magnetic field to produce an electrical signal from a positive-feedback amplifier at the resonant frequency. A count of this frequency provides a measure of the fluid pressure.

Digital pressure transducer for use at high temperatures

DOEpatents

Karplus, H.H.B.

A digital pressure sensor for measuring fluid pressures at relatively high temperatures includes an electrically conducting fiber coupled to the fluid by a force disc that causes tension in the fiber to be a function of fluid pressure. The tension causes changes in the mechanical resonant frequency of the fiber, which is caused to vibrate in a magnetic field to produce an electrical signal from a positive-feedback amplifier at the resonant frequency. A count of this frequency provides a measure of the fluid pressure.

The microflow behavior and interphase characterization of fiber-reinforced polymer composites

NASA Astrophysics Data System (ADS)

Foley, Maureen Elizabeth

There is typically a trade off that takes place when designing a composite part for ballistic purposes. Structural strength requirements typically call for less than 1% voids with strong adhesion between the fiber and matrix whereas for ballistic applications, such as spall plates for body armor where energy absorbing properties are paramount, the composites are usually resin lean and have weaker fiber matrix interphases. The energy absorbing properties of a composite can be tailored through the sizings applied to the fiber or through control of the resin infiltration of the composite part. The goal of this research was two pronged. The first was to develop a transverse microflow model that could be used to predict the microflow within a tow assuming it is completely surrounded by resin. The models developed consider the capillary pressure on the flow front, which is typically ignored by literature models, as the main driving force for transverse flow into the fiber bundles. This capillary pressure is a function of the surface properties of the resin and fiber and by tailoring these properties one can control the microflow of the resin. The dynamic model, which takes into account the fiber radius, fiber volume fraction, fiber count, resin contact angle with the fiber and the resin surface tension, was used to study the effects of tow count, fiber volume fraction and contact angle on the infiltration time. The second goal of this research was the development of an interphase characterization methodology that can be used to evaluate the interphase properties, using the Dynamic Interphase Loading Apparatus (DILA), once the fiber preforms are infiltrated. The DILA is a unique piece of equipment that allows one to pushout a fiber from a thin composite slice while recording the resulting force and displacement. The interphase characterization process includes indenter selection, sample and test configuration design, test parameters, post test validation and data reduction. This process was used to evaluate glass fiber reinforced epoxy and vinyl ester systems under quasi-static and cyclic loading as examples of the DILA capabilities.

Personal exposures to asbestos fibers during brake maintenance of passenger vehicles.

PubMed

Cely-García, María Fernanda; Sánchez, Mauricio; Breysse, Patrick N; Ramos-Bonilla, Juan P

2012-11-01

Brake linings and brake pads are among the asbestos-containing products that are readily available in Colombia. When sold separated from their support, brake linings require extensive manipulation involving several steps that include drilling, countersinking, riveting, bonding, cutting, beveling, and grinding. Without this manipulation, brake linings cannot be installed in a vehicle. The manipulation process may release asbestos fibers, which may expose brake mechanics to the fibers. Three brake repair shops located in Bogotá (Colombia) were sampled for 3 or 4 consecutive days using US National Institute for Occupational Safety and Health (NIOSH) methods 7400 and 7402. Standard procedures for quality control were followed during the sampling process, and asbestos samples were analyzed by an American Industrial Hygiene Association accredited laboratory. Personal samples were collected to assess full-shift and short-term exposures. Area samples were also collected close to the brake-lining manipulation equipment and within office facilities. Activities were documented during the sampling process. Using Phase Contrast Microscopy Equivalent counts to estimate air asbestos concentrations, all personal samples [i.e. 8-h time-weighted averages (TWAs) and 30-min personal samples] were in compliance with the US Occupational Safety and Health Administration standards. Personal asbestos concentrations based on transmission electron microscopy counts were extremely high, ranging from 0.006 to 3.493 f cm(-3) for 8-h TWA and from 0.015 to 8.835 f cm(-3) for 30-min samples. All asbestos fibers detected were chrysotile. Cleaning facilities and grinding linings resulted in the highest asbestos exposures based on transmission electron microscopy counts. There were also some samples that did not comply with the NIOSH's recommended exposure limits. The results indicate that the brake mechanics sampled are exposed to extremely high asbestos concentrations (i.e. based on transmission electron microscopy counts), suggesting that this occupational group could be at excess risk of asbestos-related diseases.

The influence of dialyzer geometry on blood coagulation and biocompatibility.

PubMed

Lins, L E; Boberg, U; Jacobson, S H; Kjellstrand, C; Ljungberg, B; Skröder, R

1993-11-01

The influence of dialyzer geometry on blood coagulation, heparin requirement and complement activation was studied in fourteen chronic hemodialysis patients. Each patient was dialyzed with two different cuprophan dialyzers, hollow fiber GF 120M and parallel plate Lundia IC5N. Both dialyzers had a wall thickness of 11 microns, surface area of 1.2 m2 and both were sterilized with ethylene oxide. Heparin doses were individually titrated. The mean heparin dose was 6089 +/- 988 U. Platelet count decreased from 218 x 10(9)/l to 193 x 10(9)/l and from 235 x 10(9)/l to 197 x 10(9)/l respectively (hollow fiber/plate dialyzer, ns). The number of leucocytes decreased at 15 min after start of dialysis by 56% and 61% (hollow fiber/plate dialyzer, ns). The heparin requirement, measured as prolongation of whole blood activated coagulation time after identical doses of heparin, were the same in hollow fiber and plate dialysis sessions. The arterial fibrinopeptide A concentrations increased during dialysis from 5.4 to 7.1 nmol/l and 8.5 to 9.6 nmol/l respectively (hollow fiber/plate dialyzer, ns). The residual blood volume in the hollow fiber dialyzers was 1.3 +/- 1.1 ml and in the plate dialyzers 1.5 +/- 0.9 ml (ns). C3a activation, indicated by a marked arterio-venous difference, was observed at 15 min after start of dialysis with hollow fiber as well as plate dialyzers. The arterio-venous difference was less pronounced at the end of dialysis. There were no differences in C3a activation between hollow fiber and plate dialyzers at any timepoint. It is concluded that dialyzer geometry does not significantly influence platelet count, blood coagulation, heparin requirement or complement activation.

Sunflower Oil and Nannochloropsis oculata Microalgae as Sources of Unsaturated Fatty Acids for Mitigation of Methane Production and Enhancing Diets' Nutritive Value.

PubMed

Gomaa, Ali S; Kholif, Ahmed E; Kholif, Abdelkader M; Salama, Reda; El-Alamy, Hamza A; Olafadehan, Olurotimi A

2018-02-28

The objective of this assay was to investigate the effect of adding sunflower oil, Nannochloropsis oculata microalgae and their mixture at 0, 1, 2, 3, 4, and 5% to three total mixed rations (TMRs) with different concentrate:forage ratios (40C:60F, 50C:50F, and 60C:40F) on in vitro gas production (GP), methane (CH 4 ) production, and nutrient degradability. Asymptotic GP, GP rate, CH 4 concentration/g acid detergent fiber (ADF), dry matter (DM) degradability (DMD), short chain fatty acids (SCFAs), and ruminal bacteria population increased, but neutral detergent fiber (NDF) degradability (NDFD), ADF degradability (ADFD), and protozoa count decreased with increasing concentrate level in the TMR. Methane production/g DM and NDF was higher for 50C:50F TMR. Sunflower oil reduced asymptotic GP, lag time, CH 4 production/g ADF, ammonia-N (NH 3 -N), and SCFA. Compared to the control treatments, additives decreased GP rate, while sunflower oil/N. oculata mixture increased DMD and NDFD. All additives at 5% increased GP rate and lag time and decreased CH 4 production/g DM, ADF, and NDF, ruminal NH 3 -N, and protozoa count. All additives at 2% increased DMD, NDFD and ADFD, SCFA, and bacteria population. Supplementation of TMR, containing different concentrate:forage ratios, with sunflower oil, N. oculata, and sunflower oil/N. oculata mixture at different doses modified in vitro GP, CH 4 production, and nutrient degradability.

The intestinal microbiota composition and weight development in children: the KOALA Birth Cohort Study.

PubMed

Scheepers, L E J M; Penders, J; Mbakwa, C A; Thijs, C; Mommers, M; Arts, I C W

2015-01-01

To investigate whether the intestinal microbiota composition in early infancy is associated with subsequent weight development in children. Analyses were conducted within the KOALA Birth Cohort Study (n = 2834). This cohort originates from two recruitments groups: pregnant women with a conventional lifestyle (no selection based on lifestyle) and pregnant women recruited through alternative channels (organic shops, anthroposophic clinicians/midwives, Steiner schools and relevant magazines). From 909 one-month-old infants, fecal samples were collected and analyzed by quantitative PCR targeting bifidobacteria, Bacteroides fragilis group, Clostridium difficile, Escherichia coli, Lactobacilli and total bacteria counts. Between the ages of 1 and 10 years, parent-reported weight and height was collected at 7 time points. Age- and gender-standardized body mass index (BMI) z-scores were calculated. Data were analyzed using generalized estimating equation. Colonization with B. fragilis group was borderline significantly associated with a higher BMI z-score of 0.15 (95% confidence interval (CI): -0.02 to 0.31), in the conventional subcohort. After stratification for fiber intake (P(forinteraction) = 0.003), colonization with B. fragilis group was associated with a 0.34 higher BMI z-score among children with a low-fiber intake in this subcohort (95% CI: 0.17-0.53). Higher counts among colonized children were positively associated with BMI z-score only in children within the conventional subcohort and a high-fiber diet (BMI z-score 0.08; 95% CI: 0.01-0.14), but inversely associated in children with a low-fiber diet (BMI z-score -0.05; 95% CI: -0.10 to 0.00), and in children recruited through alternative channels (BMI z-score -0.10; 95% CI: -0.17 to -0.03). The other bacteria were not associated with BMI z-scores, regardless of subcohort. Using a targeted approach, we conclude that the intestinal microbiota, particularly the B. fragilis group, is associated with childhood weight development. To identify the potential impact of additional bacterial taxa, further prospective studies applying an unconstrained in-depth characterization of the microbiota are needed.

Fiber optic light collection system for scanning-tunneling-microscope-induced light emission.

PubMed

Watkins, Neil J; Long, James P; Kafafi, Zakya H; Mäkinen, Antti J

2007-05-01

We report a compact light collection scheme suitable for retrofitting a scanning tunneling microscope (STM) for STM-induced light emission experiments. The approach uses a pair of optical fibers with large core diameters and high numerical apertures to maximize light collection efficiency and to moderate the mechanical precision required for alignment. Bench tests indicate that efficiency reduction is almost entirely due to reflective losses at the fiber ends, while losses due to fiber misalignment have virtually been eliminated. Photon-map imaging with nanometer features is demonstrated on a stepped Au(111) surface with signal rates exceeding 10(4) counts/s.

Total motile sperm count has a superior predictive value over the WHO 2010 cut-off values for the outcomes of intracytoplasmic sperm injection cycles.

PubMed

Borges, E; Setti, A S; Braga, D P A F; Figueira, R C S; Iaconelli, A

2016-09-01

The objective of this study was to compare (i) the intracytoplasmic sperm injection outcomes among groups with different total motile sperm count ranges, (ii) the intracytoplasmic sperm injection outcomes between groups with normal and abnormal total motile sperm count, and (iii) the predictive values of WHO 2010 cut-off values and pre-wash total motile sperm count for the intracytoplasmic sperm injection outcomes, in couples with male infertility. This study included data from 518 patients undergoing their first intracytoplasmic sperm injection cycle as a result of male infertility. Couples were divided into five groups according to their total motile sperm count: Group I, total motile sperm count <1 × 10(6) ; group II, total motile sperm count 1-5 × 10(6) ; group III, total motile sperm count 5-10 × 10(6) ; group IV, total motile sperm count 10-20 × 10(6) ; and group V, total motile sperm count >20 × 10(6) (which was considered a normal total motile sperm count value). Then, couples were grouped into an abnormal and normal total motile sperm count group. The groups were compared regarding intracytoplasmic sperm injection outcomes. The predictive values of WHO 2010 cut-off values and total motile sperm count for the intracytoplasmic sperm injection outcomes were also investigated. The fertilization rate was lower in total motile sperm count group I compared to total motile sperm count group V (72.5 ± 17.6 vs. 84.9 ± 14.4, p = 0.011). The normal total motile sperm count group had a higher fertilization rate (84.9 ± 14.4 vs. 81.1 ± 15.8, p = 0.016) and lower miscarriage rate (17.9% vs. 29.5%, p = 0.041) compared to the abnormal total motile sperm count group. The total motile sperm count was the only parameter that demonstrated a predictive value for the formation of high-quality embryos on D2 (OR: 1.18, p = 0.013), formation of high-quality embryos on D3 (OR: 1.12, p = 0.037), formation of blastocysts on D5 (OR: 1.16, p = 0.011), blastocyst expansion grade on D5 (OR: 1.27, p = 0.042), and the odds of miscarriage (OR: 0.52, p < 0.045). The total motile sperm count has a greater predictive value than the WHO 2010 cut-off values for laboratory results and pregnancy outcomes in couples undergoing intracytoplasmic sperm injection as a result of male infertility. © 2016 American Society of Andrology and European Academy of Andrology.

Development and test of photon counting lidar

NASA Astrophysics Data System (ADS)

Wang, Chun-hui; Wang, Ao-you; Tao, Yu-liang; Li, Xu; Peng, Huan; Meng, Pei-bei

2018-02-01

In order to satisfy the application requirements of spaceborne three dimensional imaging lidar , a prototype of nonscanning multi-channel lidar based on receiver field of view segmentation was designed and developed. High repetition frequency micro-pulse lasers, optics fiber array and Geiger-mode APD, combination with time-correlated single photon counting technology, were adopted to achieve multi-channel detection. Ranging experiments were carried out outdoors. In low echo photon condition, target photon counting showed time correlated and noise photon counting were random. Detection probability and range precision versus threshold were described and range precision increased from 0.44 to 0.11 when threshold increased from 4 to 8.

Moisture content during extrusion of oats impacts the initial fermentation metabolites and probiotic bacteria during extended fermentation by human fecal microbiota.

PubMed

Brahma, Sandrayee; Weier, Steven A; Rose, Devin J

2017-07-01

Extrusion exposes flour components to high pressure and shear during processing, which may affect the dietary fiber fermentability by human fecal microbiota. The objective of this study was to determine the effect of flour moisture content during extrusion on in vitro fermentation properties of whole grain oats. Extrudates were processed at three moisture levels (15%, 18%, and 21%) at fixed screw speed (300rpm) and temperature (130°C). The extrudates were then subjected to in vitro digestion and fermentation. Extrusion moisture significantly affected water-extractable β-glucan (WE-BG) in the extrudates, with samples processed at 15% moisture (lowest) and 21% moisture (highest) having the highest concentration of WE-BG. After the first 8h of fermentation, more WE-BG remained in fermentation media in samples processed at 15% moisture compared with the other conditions. Also, extrusion moisture significantly affected the production of acetate, butyrate, and total SCFA by the microbiota during the first 8h of fermentation. Microbiota grown on extrudates processed at 18% moisture had the highest production of acetate and total SCFA, whereas bacteria grown on extrudates processed at 15% and 18% moisture had the highest butyrate production. After 24h of fermentation, samples processed at 15% moisture supported lower Bifidobacterium counts than those produced at other conditions, but had among the highest Lactobacillus counts. Thus, moisture content during extrusion significantly affects production of fermentation metabolites by the gut microbiota during the initial stages of fermentation, while also affecting probiotic bacteria counts during extended fermentation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Development and Testing of a Scanning Differential Absorption Lidar For Carbon Sequestration Site Monitoring

NASA Astrophysics Data System (ADS)

Soukup, B.; Johnson, W.; Repasky, K. S.; Carlsten, J. L.

2013-12-01

A scanning differential absorption lidar (DIAL) instrument for carbon sequestration site monitoring is under development and testing at Montana State University. The laser transmitter uses two tunable discrete mode laser diodes (DMLD) operating in the continuous wave (cw) mode with one locked to the on-line absorption wavelength at 1571.4067 nm and the second operating at the off-line wavelength at 1571.2585 nm. Two in-line fiber optic switches are used to switch between on-line and off-line operation. After the fiber optic switches, an acousto-optic modulator (AOM) is used to generate a pulse train used to injection seed an erbium doped fiber amplifier (EDFA) to produce eye-safe laser pulses with maximum pulse energies of 66 J and a pulse repetition frequency of 15 kHz. The DIAL receiver uses a 28 cm diameter Schmidt-Cassegrain telescope to collect that backscattered light, which is then monitored using a fiber coupled photo-multiplier tube (PMT) module operating in the photon counting mode. The PMT has a 3% quantum efficiency, a dark count rate of 90 kHz, and a maximum count rate of 1 MHz. Recently, a fiber coupled avalanche photodiode (APD) operating in the geiger mode has been incorporated into the DIAL receiver. The APD has a quantum efficiency of 10%, a dark count rate of 10 kHz, and a maximum count rate of 1 MHz and provides a much larger dynamic range than the PMT. Both the PMT and APD provide TTL logic pulses that are monitored using a multichannel scaler card used to count the return photons as a function of time of flight and are thus interchangeable. The DIAL instrument was developed at the 1.571 m wavelength to take advantage of commercial-off-the-shelf components. The instrument is operated using a custom Labview program that switches to the DMLD operating at the on-line wavelength, locks this laser to a user defined wavelength setting, and collects return signals for a user defined time. The control program switches to the DMLD operating at the off-line wavelength where data is again collected for a user defined time. The control program repeats this process until stopped by the operator. The DIAL instrument has been operated at the Zero Emission Research Technology (ZERT) field site located on the Montana State University campus and at the Big Sky Carbon Sequestration Partnership site located in north-central Montana. Data collected by the DIAL instrument at both field sites demonstrate that the DIAL is capable of retrieving night time CO2 number density profiles out to a range of 2.5 km with a 150 m range resolution. The DIAL retrievals are validated using a co-located Li-COR 820 gas analyzer placed along the DIAL optical path allowing comparison at a single range as a function of time.

Proteomic profiling of cellulase-aid-extracted membrane proteins for functional identification of cellulose synthase complexes and their potential associated- components in cotton fibers.

PubMed

Li, Ao; Wang, Ruyi; Li, Xianliang; Liu, Mingyong; Fan, Jian; Guo, Kai; Luo, Bing; Chen, Tingting; Feng, Shengqiu; Wang, Yanting; Wang, Bingrui; Peng, Liangcai; Xia, Tao

2016-05-19

Cotton fibers are an excellent model for understanding of cellulose biosynthesis in higher plants. In this study, we determined a high cellulose biosynthesis activity in vitro by optimizing biochemical reaction conditions in cotton fibers. By adding a commercial cellulase enzyme into fibers extraction process, we extracted markedly higher levels of GhCESA1 and GhCESA8 proteins and observed an increase in β-1,4-glucan and β-1,3-glucan products in vitro. LC-MS/MS analysis of anti-GhCESA8-immunoprecipitated proteins showed that 19 proteins could be found in three independent experiments including four CESAs (GhCESA1,2,7,8), five well-known non-CESA proteins, one callose synthase (CALS) and nine novel proteins. Notably, upon the cellulase treatment, four CESAs, one CALS and four novel proteins were measured at relatively higher levels by calculating total peptide counts and distinct peptide numbers, indicating that the cellulase-aid-extracted proteins most likely contribute to the increase in β-glucan products in vitro. These results suggest that the cellulase treatment may aid to release active cellulose synthases complexes from growing glucan chains and make them more amenable to extraction. To our knowledge, it is the first time report about the functional identification of the potential proteins that were associated with plant cellulose and callose synthases complexes by using the cellulase-aided protein extraction.

Quantum Key Distribution Using Polarized Single Photons

DTIC Science & Technology

2009-04-01

liquid helium the SSPD with a low - noise , cryogenic high-electron-mobility transistor (HEMT) with high-input impedance. This arrangement allowed us...Sobolewski, IEEE Trans. Appl. Supercon., accepted (2009). 19. " Measurements of amplitude distributions of dark counts and photon counts in NbN ...75, 174507 (2007). 6. "Fiber-Coupled NbN Superconducting Single-Photon Detectors for Quantum Correlation Measurements ," W. Slysz, M. Wegrzecki, J

Effect of Psyllium Fiber Supplementation on C-Reactive Protein: The Trial to Reduce Inflammatory Markers (TRIM)

PubMed Central

King, Dana E.; Mainous, Arch G.; Egan, Brent M.; Woolson, Robert F.; Geesey, Mark E.

2008-01-01

PURPOSE Recent evidence supports a significant association between the intake of dietary fiber and levels of inflammatory markers. The objective of this study was to determine whether daily fiber supplementation would reduce levels of inflammatory markers. METHODS This study was a prospective randomized controlled trial at a single university medical center. Participants were overweight or obese adults with no history of heart disease. The intervention was psyllium supplementation at either 7 or 14 g/d for 3 months compared with no supplements in a control group. The main outcome measure was change in level of high-sensitivity C-reactive protein (hsCRP) concentration; secondary outcomes included changes in interleukin-6 (IL-6) levels, fibrinogen levels, and white blood cell (WBC) count. Protocol completers attended at least 2 visits and took more than 75% of the prescribed fiber dose. RESULTS In this intent-to-treat analysis (n = 158), there were no significant differences between either of the 2 treatment groups and the control group in the amount of change in CRP, fibrinogen, or IL-6 levels or in WBC count (P>.05). In the analysis of protocol completers (n = 132), there also were no significant differences between the groups except for a small decrease in fibrinogen level in the high-fiber group (−6 mg/dL [−0.18 μmol/L] compared with 13 mg/dL [0.38 μmol/L] in the control group, P<.05). CONCLUSION Psyllium fiber supplementation did not significantly reduce CRP levels in overweight or obese individuals in this trial, and changes in other markers were not consistent. Further research is needed to determine whether other fibers or nutrients can reduce inflammatory markers. PMID:18332401

Neuroimmune interactions at different intestinal sites are related to abdominal pain symptoms in children with IBS.

PubMed

Di Nardo, G; Barbara, G; Cucchiara, S; Cremon, C; Shulman, R J; Isoldi, S; Zecchi, L; Drago, L; Oliva, S; Saulle, R; Barbaro, M R; Stronati, L

2014-02-01

Neuroimmune interactions and inflammation have been proposed as factors involved in sensory-motor dysfunction and symptom generation in adult irritable bowel syndrome (IBS) patients. In children with IBS and healthy controls, we measured ileocolonic mast cell infiltration and fecal calprotectin and evaluated the relationships between these parameters and abdominal pain symptoms and stooling pattern. Irritable bowel syndrome patients diagnosed according to Pediatric Rome III criteria and healthy controls kept a 2-week pain/stooling diary. Ileocolonic mucosal mast cells (MC) and MC in close proximity to nerve fibers (MC-NF) were identified immunohistochemically and quantified. Fecal calprotectin concentration was measured. 21 IBS patients and 10 controls were enrolled. The MC-NF count was significantly higher in the ileum (p = 0.01), right colon (p = 0.04), and left colon (p < 0.001) of IBS patients compared with controls. No differences in fecal calprotectin concentration were noted. Abdominal pain intensity score correlated with ileal MC count (r(s) = 0.47, p = 0.030) and right colon MC-NF count (r(s) = 0.52, p = 0.015). In addition, children with IBS with >3 abdominal pain episodes/week had greater ileal (p = 0.002) and right colonic (p = 0.01) MC counts and greater ileal (p = 0.05) and right colonic (p = 0.016) MC-NF counts than children with less frequent pain. No relationship was found between MC and MC-NF and fecal calprotectin or stooling pattern. Mast cells-nerve fibers counts are increased in the ileocolonic mucosa of children with IBS. Mast cells and MC-NF counts are related to the intensity and frequency of abdominal pain. © 2013 John Wiley & Sons Ltd.

Nutritional changes in powdered red pepper upon in vitro infection of Aspergillus flavus

PubMed Central

Tripathi, Smita; Mishra, H.N.

2009-01-01

Quantitative losses in various biochemical constituents like capsaicin, carotenes, ascorbic acid, polyphenols, mineral matter, sugars (soluble and insoluble), protein and fat were estimated after the successful growth of Aspergillus flavus for 30 days on powdered red pepper. The fungal biomass was measured by ergosterol content and Aflatoxin B1 by HPLC. Amongst the various nutritional constituents evaluated for nutritional losses and changes the highest nutritional loss was reported in total carotenoids (88.55%) followed by total sugars (85.5%). The protein content of the infected sample increased from 18.01% to 23%. The nutritional profile of chilli powder (Capsicum annum var. sannam L.) shows highest share of total soluble sugars (32.89%) and fiber content (21.05%), followed by protein (18.01%) and fat (13.32%) making it an ideal solid- substrate for mould growth. At the end of incubation the fungal biomass was 192. 25 mg / 100 gram powder, total plate count 17.5 X 10 4 CFU/g and Aflatoxin B1 content was 30.06 μg / kg. PMID:24031333

Fiber Optic Experience with the Smart Actuation System on the F-18 Systems Research Aircraft

NASA Technical Reports Server (NTRS)

Zavala, Eddie

1997-01-01

High bandwidth, immunity to electromagnetic interference, and potential weight savings have led to the development of fiber optic technology for future aerospace vehicle systems. This technology has been incorporated in a new smart actuator as the primary communication interface. The use of fiber optics simplified system integration and significantly reduced wire count. Flight test results showed that fiber optics could be used in aircraft systems and identified critical areas of development of fly-by-light technology. This paper documents the fiber optic experience gained as a result of this program, and identifies general design considerations that could be used in a variety of specific applications of fiber optic technology. Environmental sensitivities of fiber optic system components that significantly contribute to optical power variation are discussed. Although a calibration procedure successfully minimized the effect of fiber optic sensitivities, more standardized calibration methods are needed to ensure system operation and reliability in future aerospace vehicle systems.

Airborne asbestos in Colorado public schools.

PubMed

Chadwick, D A; Buchan, R M; Beaulieu, H J

1985-02-01

Levels of airborne asbestos for six Colorado public school facilities with sprayed-on asbestos materials were documented using three analytical techniques. Phase contrast microscopy showed levels up to the thousandths of a fiber per cubic centimeter (f/cc), scanning electron microscopy (SEM) up to the hundredths of a f/cc, and transmission electron microscopy coupled to selected area electron diffraction and energy dispersive X-ray analysis (TEM-SAED-EDXA) up to the tenths of an asbestos f/cc. Phase contrast microscopy was found to be an inadequate analytical technique for documenting the levels of airborne asbestos fibers in the schools: only large fibers which were not embedded in the filter were counted, and asbestos fibers were not distinguished from nonasbestos.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sebastien, P.; Bignon, J.; Barris, Y.I.

The counts of ferruginous bodies (pulmonary-coated mineral fibers) in sputum samples from inhabitants in each of the two agricultural villages of Karain and Tuskoey (Cappadocia, central Turkey) increased with subjects' age, whereas 94% of samples collected in the neighboring villages were free of ferruginous body. These findings are consistent with the previous hypothesis that the very high frequency of mesothelioma in Karain and Tuskoey was related to exposure to airborne mineral fibers of natural origin.

The Bushbaby Optic Nerve: Fiber Count and Fiber Diameter Spectrum

DTIC Science & Technology

1986-03-01

laminar organization of rece,)tive field properties in the lateral geniculate nucleus of bushbaby (Norton and Casagrande, 1982), the organization of...field properties in lateral geniculate nucleus of bushbaby (Galago cras- sicaudatus). Journal of Neurophysiology. 47(4):715-741. O’Fiaherty, J.J...employed an advanced digitized image analysis system (Carl Zeiss Inc., Videoplan Image Analysis System)* to more accurately and rapidly collect, analyze, and

Potential release of fibers from burning carbon composites. [aircraft fires

NASA Technical Reports Server (NTRS)

Bell, V. L.

1980-01-01

A comprehensive experimental carbon fiber source program was conducted to determine the potential for the release of conductive carbon fibers from burning composites. Laboratory testing determined the relative importance of several parameters influencing the amounts of single fibers released, while large-scale aviation jet fuel pool fires provided realistic confirmation of the laboratory data. The dimensions and size distributions of fire-released carbon fibers were determined, not only for those of concern in an electrical sense, but also for those of potential interest from a health and environmental standpoint. Fire plume and chemistry studies were performed with large pool fires to provide an experimental input into an analytical modelling of simulated aircraft crash fires. A study of a high voltage spark system resulted in a promising device for the detection, counting, and sizing of electrically conductive fibers, for both active and passive modes of operation.

Improving the estimation of mealtime insulin dose in adults with type 1 diabetes: the Normal Insulin Demand for Dose Adjustment (NIDDA) study.

PubMed

Bao, Jiansong; Gilbertson, Heather R; Gray, Robyn; Munns, Diane; Howard, Gabrielle; Petocz, Peter; Colagiuri, Stephen; Brand-Miller, Jennie C

2011-10-01

Although carbohydrate counting is routine practice in type 1 diabetes, hyperglycemic episodes are common. A food insulin index (FII) has been developed and validated for predicting the normal insulin demand generated by mixed meals in healthy adults. We sought to compare a novel algorithm on the basis of the FII for estimating mealtime insulin dose with carbohydrate counting in adults with type 1 diabetes. A total of 28 patients using insulin pump therapy consumed two different breakfast meals of equal energy, glycemic index, fiber, and calculated insulin demand (both FII = 60) but approximately twofold difference in carbohydrate content, in random order on three consecutive mornings. On one occasion, a carbohydrate-counting algorithm was applied to meal A (75 g carbohydrate) for determining bolus insulin dose. On the other two occasions, carbohydrate counting (about half the insulin dose as meal A) and the FII algorithm (same dose as meal A) were applied to meal B (41 g carbohydrate). A real-time continuous glucose monitor was used to assess 3-h postprandial glycemia. Compared with carbohydrate counting, the FII algorithm significantly decreased glucose incremental area under the curve over 3 h (-52%, P = 0.013) and peak glucose excursion (-41%, P = 0.01) and improved the percentage of time within the normal blood glucose range (4-10 mmol/L) (31%, P = 0.001). There was no significant difference in the occurrence of hypoglycemia. An insulin algorithm based on physiological insulin demand evoked by foods in healthy subjects may be a useful tool for estimating mealtime insulin dose in patients with type 1 diabetes.

Improving the Estimation of Mealtime Insulin Dose in Adults With Type 1 Diabetes

PubMed Central

Bao, Jiansong; Gilbertson, Heather R.; Gray, Robyn; Munns, Diane; Howard, Gabrielle; Petocz, Peter; Colagiuri, Stephen; Brand-Miller, Jennie C.

2011-01-01

OBJECTIVE Although carbohydrate counting is routine practice in type 1 diabetes, hyperglycemic episodes are common. A food insulin index (FII) has been developed and validated for predicting the normal insulin demand generated by mixed meals in healthy adults. We sought to compare a novel algorithm on the basis of the FII for estimating mealtime insulin dose with carbohydrate counting in adults with type 1 diabetes. RESEARCH DESIGN AND METHODS A total of 28 patients using insulin pump therapy consumed two different breakfast meals of equal energy, glycemic index, fiber, and calculated insulin demand (both FII = 60) but approximately twofold difference in carbohydrate content, in random order on three consecutive mornings. On one occasion, a carbohydrate-counting algorithm was applied to meal A (75 g carbohydrate) for determining bolus insulin dose. On the other two occasions, carbohydrate counting (about half the insulin dose as meal A) and the FII algorithm (same dose as meal A) were applied to meal B (41 g carbohydrate). A real-time continuous glucose monitor was used to assess 3-h postprandial glycemia. RESULTS Compared with carbohydrate counting, the FII algorithm significantly decreased glucose incremental area under the curve over 3 h (–52%, P = 0.013) and peak glucose excursion (–41%, P = 0.01) and improved the percentage of time within the normal blood glucose range (4–10 mmol/L) (31%, P = 0.001). There was no significant difference in the occurrence of hypoglycemia. CONCLUSIONS An insulin algorithm based on physiological insulin demand evoked by foods in healthy subjects may be a useful tool for estimating mealtime insulin dose in patients with type 1 diabetes. PMID:21949219

High-fidelity transmission of polarization encoded qubits from an entangled source over 100 km of fiber.

PubMed

Hübel, Hannes; Vanner, Michael R; Lederer, Thomas; Blauensteiner, Bibiane; Lorünser, Thomas; Poppe, Andreas; Zeilinger, Anton

2007-06-11

We demonstrate non-degenerate down-conversion at 810 and 1550 nm for long-distance fiber based quantum communication using polarization entangled photon pairs. Measurements of the two-photon visibility, without dark count subtraction, have shown that the quantum correlations (raw visibility 89%) allow secure quantum cryptography after 100 km of non-zero dispersion shifted fiber using commercially available single photon detectors. In addition, quantum state tomography has revealed little degradation of state negativity, decreasing from 0.99 at the source to 0.93 after 100 km, indicating minimal loss in fidelity during the transmission.

Nonadiabatic tapered optical fiber sensor for measurement of antimicrobial activity of silver nanoparticles against Escherichia coli.

PubMed

Zibaii, Mohammad Ismail; Latifi, Hamid; Saeedian, Zahra; Chenari, Zinab

2014-06-05

Silver nanoparticles (SNPs) exhibit antibacterial properties via bacterial inactivation and growth inhibition but the mechanism is not yet completely understood. In this study a label free and rapid detection method for study of antimicrobial activity of the SNP against Escherichia coli (E. coli K-12) is investigated using a nonadiabtic tapered fiber optic (NATOF) biosensor. The results show that SNPs interact with bacteria either by anchoring to or penetrating into the bacterial cell layer. These mechanism changes the refractive index (RI) of the tapered region, which in turn lead to the changes in the optical characteristics of the tapered fiber and output signals. With similar conditions for bacteria, the inhibition rate of the E. coli growth was measured by colony counting method as an experimental control and the results were compared with those obtained from the fiber sensor measurements. For SNP concentrations ranging from 0 to 50 μg ml(-1) the inhibition rates of the E. coli growth were measured to be from 1.27 h(-1) to -0.69 h(-1) and from -3.00×10(-3) h(-1) to -1.98×10(-2) h(-1) for colony counting and optical fiber biosensor, respectively. The results demonstrate the potential of the proposed NATOF biosensor as a label free and rapid sensing platform for understanding the mechanism of antibacterial effects of SNPs. Copyright © 2014 Elsevier B.V. All rights reserved.

Continued advances in high brightness fiber-coupled laser modules for efficient pumping of fiber and solid-state lasers

NASA Astrophysics Data System (ADS)

Hemenway, M.; Chen, Z.; Urbanek, W.; Dawson, D.; Bao, L.; Kanskar, M.; DeVito, M.; Martinsen, R.

2018-02-01

Both the fibber laser and diode-pumped solid-state laser market continue to drive advances in pump diode module brightness. We report on the continued progress by nLIGHT to develop and deliver the highest brightness diode-laser pumps using single-emitter technology. Continued advances in multimode laser diode technology [13] and fiber-coupling techniques have enabled higher emitter counts in the element packages, enabling us to demonstrate 305 W into 105 μm - 0.16 NA. This brightness improvement is achieved by leveraging our prior-reported package re-optimization, allowing an increase in the emitter count from two rows of nine emitters to two rows of twelve emitters. Leveraging the two rows off twelve emitter architecture,, product development has commenced on a 400 W into 200 μm - 00.16 NA package. Additionally, the advances in pump technology intended for CW Yb-doped fiber laser pumping has been leveraged to develop the highest brightness 793 nm pump modules for 2 μm Thulium fiber laser pumping, generating 150 W into 200 μm - 0.18 NA and 100 W into 105 μm - 0.15 NA. Lastly, renewed interest in direct diode materials processing led us to experiment with wavelength multiplexing our existing state of the art 200 W, 105 μm - 00.15 NA package into a combined output of 395 WW into 105 μm - 0.16 NA.

CuOF: an electrical to optical interface for the upgrade of the CMS muon Drift Tubes system

NASA Astrophysics Data System (ADS)

Dattola, D.; De Remigis, P.; Maselli, S.; Mazza, G.; Rotondo, F.; Wheadon, R.

2013-02-01

The upgrade of the Drift Tube system of the CMS experiment foresee the relocation of the electronics actually sitting on the racks beside the magnet from the cavern to the counting room. It is thus required to convert the signals from electrical to optical, for a total number of 3500 channels that run at up to 480 Mb/s. A Copper to Optical Fiber board is currently under design. The board is divided into a mother board, which hosts the slow control system based on Field Programmable Gate Array, and four mezzanine cards, each with 8 conversion channels. A prototype of the mezzanine board has been designed and tested under irradiation.

Scintillating fiber-based photon beam profiler for the Jefferson Lab tagged photon beam line

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zorn, C.; Barbosa, F.J.; Freyberger, A.

2000-10-01

A scintillating fiber hodoscope has been built for use as a photon beam profiler in the bremsstrahlung tagged photon beam in Hall B of the Thomas Jefferson National Accelerator Facility (Jefferson Lab). The device consists of a linear array of 64 2-2 mm2 scintillating fibers glued to a corresponding set of light guide fibers. Both fiber types use double-clad technology for maximum intensity. The light guide fibers are gently bent into a square array of holes and air-gap coupled to four compact position-sensitive photomultipliers (16 channel Hamamatsu R5900-M16). Custom electronics amplifies and converts the analog outputs to ECL pulses whichmore » are counted by VME-based scalars. The device consisting of the fibers, photomultipliers, and electronics is sealed within a light-tight aluminum box. Two modules make up a beam imaging 2-D system. The system has been tested successfully during an experimental run« less

Total Lactic Acid Bacteria (LAB), Antioxidant Activity, and Acceptance of Synbiotic Yoghurt with Binahong Leaf Extract (Anredera cordifolia (Ten.) Steenis)

NASA Astrophysics Data System (ADS)

Lestari, R. P.; Nissa, C.; Afifah, D. N.; Anjani, G.; Rustanti, N.

2018-02-01

Alternative treatment for metabolic syndrome can be done by providing a diet consist of functional foods or beverages. Synbiotic yoghurt containing binahong leaf extract which high in antioxidant, total LAB and fiber can be selected to reduce the risk of metabolic syndrome. The effect of binahong leaf extract in synbiotic yoghurt against total LAB, antioxidant activity, and acceptance were analyzed. The experiment was done with complete randomized design with addition of binahong leaf extract 0% (control); 0.12%; 0.25%; 0.5% in synbiotic yoghurt. Analysis of total LAB using Total Plate Count test, antioxidant activity using DPPH, and acceptance were analyzed by hedonic test. The addition of binahong leaf extract in various doses in synbiotic yoghurt decreased total LAB without significant effect (p=0,145). There was no effect of addition binahong leaf extract on antioxidant activity (p=0,297). The addition of binahong leaf extract had an effect on color, but not on aroma, texture and taste. The best result was yoghurt synbiotic with addition of 0,12% binahong leaf extract. Conclusion of the research was the addition of binahong leaf extract to synbiotic yogurt did not significantly affect total LAB, antioxidant activity, aroma, texture and taste; but had a significant effect on color.

Morbidity and mortality of vermiculite miners and millers exposed to tremolite-actinolite: Part I. Exposure estimates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amandus, H.E.; Wheeler, R.; Jankovic, J.

1987-01-01

The vermiculite ore and concentrate of a mine and mill near Libby, Montana, was found to be contaminated with fibrous tremolite-actinolite. Of 599 fibers (length greater than 5 microns and width greater than 0.45 micron) counted in eight airborne membrane filter samples, 96% had an aspect ratio greater than 10 and 16% had an aspect ratio greater than 50. Additionally, 73% of the fibers were longer than 10 microns, 36% were longer than 20 microns, and 10% were longer than 40 microns. Estimates of exposure before 1964 in the dry mill were 168 fibers/cc for working areas, 182 fibers/cc formore » sweepers, 88 fibers/cc for skipping, and 13 fibers/cc for the quality control laboratory. In 1964-1971, exposure estimates for these areas were 33, 36, 17, and 3 fibers/cc, respectively. Estimates of exposures in the mine before 1971 ranged from 9-23 fibers/cc for drillers and were less than 2 fibers/cc for nondrilling jobs. All 8-hr TWA job exposure estimates decreased from 1972-1976, and from 1977-1982 were less than 1 fiber/cc.« less

The morbidity and mortality of vermiculite miners and millers exposed to tremolite-actinolite: Part I. Exposure estimates.

PubMed

Amandus, H E; Wheeler, R; Jankovic, J; Tucker, J

1987-01-01

The vermiculite ore and concentrate of a mine and mill near Libby, Montana, was found to be contaminated with fibrous tremolite-actinolite. Of 599 fibers (length greater than 5 microns and width greater than 0.45 micron) counted in eight airborne membrane filter samples, 96% had an aspect ratio greater than 10 and 16% had an aspect ratio greater than 50. Additionally, 73% of the fibers were longer than 10 microns, 36% were longer than 20 microns, and 10% were longer than 40 microns. Estimates of exposure before 1964 in the dry mill were 168 fibers/cc for working areas, 182 fibers/cc for sweepers, 88 fibers/cc for skipping, and 13 fibers/cc for the quality control laboratory. In 1964-1971, exposure estimates for these areas were 33, 36, 17, and 3 fibers/cc, respectively. Estimates of exposures in the mine before 1971 ranged from 9-23 fibers/cc for drillers and were less than 2 fibers/cc for nondrilling jobs. All 8-hr TWA job exposure estimates decreased from 1972-1976, and from 1977-1982 were less than 1 fiber/cc.

Family income per capita, age, and smoking status are predictors of low fiber intake in residents of São Paulo, Brazil.

PubMed

Santos, Paula Victória Félix Dos; Sales, Cristiane Hermes; Vieira, Diva Aliete Santos; de Mello Fontanelli, Mariane; Marchioni, Dirce Maria; Fisberg, Regina Mara

2016-05-01

We hypothesized that dietary total fiber intake may be less than recommendations and that the intake of total, soluble, and insoluble fiber may be associated with demographic, lifestyle, and socioeconomic factors. Data were drawn from the Health Survey of São Paulo, a cross-sectional population-based study. Adolescents, adults, and elderly persons living in São Paulo city were included. Demographic, lifestyle, and anthropometric data were collected from households. Dietary intake was measured using two 24-hour dietary recalls. All analyses were conducted based on the sample design of the study. The proportion of individuals who met the adequate intake (AI) for total fiber intake was examined, and foods that contributed to the intake of fiber and fractions were evaluated. The relationship of total, soluble, and insoluble fiber intake with demographic, socioeconomic, and lifestyle characteristics was determined using multiple linear regression models. A low proportion of individuals met the AI for dietary fiber. The foods that most contributed to total fiber intake were beans, French bread, and rice. Total fiber intake was negatively associated with former and current smokers and positively associated with family income per capita and age. Soluble fiber intake was negatively associated with current smokers and positively associated with female sex, age, and family income per capita. Insoluble fiber intake was negatively associated with former or current smokers and positively associated with age. In summary, residents in the city of São Paulo had a low fiber intake, and demographic, socioeconomic, and lifestyle factors were associated with dietary fiber and intake of its fractions. Copyright © 2016 Elsevier Inc. All rights reserved.

One-year follow-up of the phagocytic activity of leukocytes after exposure of rats to asbestos and basalt fibers.

PubMed Central

Hurbánková, M

1994-01-01

The phagocytic activity of leukocytes in peripheral blood was investigated after 2, 24, and 48 hr; 1, 2, 4, and 8 weeks; and 6 and 12 months following intraperitoneal administration of asbestos and basalt fibers to Wistar rats. Asbestos and basalt fibers differed in their effects on the parameters studied. Both granulocyte count and phagocytic activity of leukocytes during the 1-year dynamic follow-up in both dust-exposed groups of animals changed in two phases, characterized by the initial stimulation of the acute phase I, followed by the suppression of the parameters in the chronic phase II. Exposure to asbestos and basalt fibers led, in phase II, to impairment of the phagocytic activity of granulocytes. Asbestos fibers also significantly decreased phagocytic activity of monocytes. Exposure to basalt fibers did not affect the phagocytic activity of monocytes in phase II. Results suggest that the monocytic component of leukocytes plays an important role in the development of diseases caused by exposure to fibrous dusts, but basalt fibers have lesser biological effects than asbestos fibers. PMID:7882931

Total lymphocyte count and subpopulation lymphocyte counts in relation to dietary intake and nutritional status of peritoneal dialysis patients.

PubMed

Grzegorzewska, Alicja E; Leander, Magdalena

2005-01-01

Dietary deficiency causes abnormalities in circulating lymphocyte counts. For the present paper, we evaluated correlations between total and subpopulation lymphocyte counts (TLC, SLCs) and parameters of nutrition in peritoneal dialysis (PD) patients. Studies were carried out in 55 patients treated with PD for 22.2 +/- 11.4 months. Parameters of nutritional status included total body mass, lean body mass (LBM), body mass index (BMI), and laboratory indices [total protein, albumin, iron, ferritin, and total iron binding capacity (TIBC)]. The SLCs were evaluated using flow cytometry. Positive correlations were seen between TLC and dietary intake of niacin; TLC and CD8 and CD16+56 counts and energy delivered from protein; CD4 count and beta-carotene and monounsaturated fatty acids 17:1 intake; and CD19 count and potassium, copper, vitamin A, and beta-carotene intake. Anorexia negatively influenced CD19 count. Serum albumin showed correlations with CD4 and CD19 counts, and LBM with CD19 count. A higher CD19 count was connected with a higher red blood cell count, hemoglobin, and hematocrit. Correlations were observed between TIBC and TLC and CD3 and CD8 counts, and between serum Fe and TLC and CD3 and CD4 counts. Patients with a higher CD19 count showed a better clinical-laboratory score, especially less weakness. Patients with a higher CD4 count had less expressed insomnia. Quantities of ingested vitamins and minerals influence lymphocyte counts in the peripheral blood of PD patients. Evaluation of TLC and SLCs is helpful in monitoring the effectiveness of nutrition in these patients.

A THUMBNAIL HISTORY OF HETEROTROPHIC PLATE COUNT (HPC) METHODOLOGY IN THE UNITED STATES

EPA Science Inventory

Over the past 100 years, the method of determining the number of bacteria in water, foods or other materials has been termed variously as: bacterial plate count, total plate count, total viable plate count, aerobic plate count, standard plate cound and more recently, heterotrophi...

The efficacy of laparoscopic presacral neurectomy in dysmenorrhea: is it related to the amount of excised neural tissue?

PubMed

Api, Murat; Boza, Ayşen; Ceyhan, Mehmet; Kaygusuz, Ecmel; Yavuz, Hülya; Api, Olus

2017-12-01

To assess the correlation between the number of excised neural fibers and degree of pain relief following laparoscopic presacral neurectomy (LPSN). In this before and after study, 20 patients with severe midline dysmenorrhea [Visual Analogue Scale (VAS) >80 mm] unresponsive to medical therapy were consecutively enrolled. All patients underwent LPSN. The superior hypogastric plexus was excised and sent for histologic confirmation. Two pathologists counted the number of neural fibers in the surgically removed tissue. VAS was used for pain assessment before and 2nd, 3rd, 6th, and 12th months after the operations. Out of the initial 20 patients undergoing LPSN, eight were excluded from the final analysis due to intraoperative diagnosis of endometriosis; therefore, the remaining 12 patients were evaluated. The pain scores significantly decreased at each follow-up visit compared with the preoperative period (p=0.002). The pathologists, who were blinded, reported the median (minimum-maximum) neural fiber count as 46 (20-85) and 47 (18-83). No significant correlation was demonstrated between the number of excised neural fibers and the amount of pain relief following LPSN. LPSN is an effective surgical procedure to control primary dysmenorrhea. Our preliminary results revealed that the degree of pain relief in cases of severe midline dysmenorrhea was not related to the amount of excised neural tissue in LPSN.

The efficacy of laparoscopic presacral neurectomy in dysmenorrhea: is it related to the amount of excised neural tissue?

PubMed Central

Api, Murat; Boza, Ayşen; Ceyhan, Mehmet; Kaygusuz, Ecmel; Yavuz, Hülya; Api, Olus

2017-01-01

Objective: To assess the correlation between the number of excised neural fibers and degree of pain relief following laparoscopic presacral neurectomy (LPSN). Materials and Methods: In this before and after study, 20 patients with severe midline dysmenorrhea [Visual Analogue Scale (VAS) >80 mm] unresponsive to medical therapy were consecutively enrolled. All patients underwent LPSN. The superior hypogastric plexus was excised and sent for histologic confirmation. Two pathologists counted the number of neural fibers in the surgically removed tissue. VAS was used for pain assessment before and 2nd, 3rd, 6th, and 12th months after the operations. Results: Out of the initial 20 patients undergoing LPSN, eight were excluded from the final analysis due to intraoperative diagnosis of endometriosis; therefore, the remaining 12 patients were evaluated. The pain scores significantly decreased at each follow-up visit compared with the preoperative period (p=0.002). The pathologists, who were blinded, reported the median (minimum-maximum) neural fiber count as 46 (20-85) and 47 (18-83). No significant correlation was demonstrated between the number of excised neural fibers and the amount of pain relief following LPSN. Conclusion: LPSN is an effective surgical procedure to control primary dysmenorrhea. Our preliminary results revealed that the degree of pain relief in cases of severe midline dysmenorrhea was not related to the amount of excised neural tissue in LPSN. PMID:29379667

Comparison of phytochemical profiles and health benefits in fiber and oil flaxseeds (Linum usitatissimum L.).

PubMed

Wang, Hong; Wang, Junhong; Qiu, Caisheng; Ye, Yutong; Guo, Xinbo; Chen, Gu; Li, Tong; Wang, Yufu; Fu, Xiong; Liu, Rui Hai

2017-01-01

Flaxseed (Linum usitatissimum L.) is a rich source of nutritive and bioactive compounds. The research evaluated the disparity in phytochemical profiles along with total and cellular antioxidant activities between oil and fiber flaxseeds. There were significant differences in total phenolics, total flavonoids and antioxidant activities among the six cultivars of fiber and oil flaxseed, respectively. Four phytochemical compounds including caffeic acid, p-coumaric acid and ferulic acid, and secoisolariciresinol diglucoside (SDG) were identified and quantified in the cultivars of oil and fiber flaxseed by HPLC analysis. Notably, the average of total phenolic and flavonoid contents, along with total antioxidant activities between fiber and oil flaxseeds were not different significantly; even the cellular antioxidant activity of fiber flaxseed was superior to oil flaxseed. These results suggest that fiber flaxseeds would be valuable candidates as functional products and dietary supplements production owing to the higher bioactive values as well as oil flaxseeds. Copyright © 2016 Elsevier Ltd. All rights reserved.

Effects of dietary protein concentration and coconut oil supplementation on nitrogen utilization and production in dairy cows.

PubMed

Lee, C; Hristov, A N; Heyler, K S; Cassidy, T W; Long, M; Corl, B A; Karnati, S K R

2011-11-01

The objective of this study was to investigate the effect of metabolizable protein (MP) deficiency and coconut oil supplementation on N utilization and production in lactating dairy cows. The hypothesis of the study was that a decrease in ruminal protozoal counts with coconut oil would increase microbial protein synthesis in the rumen, thus compensating for potential MP deficiency. The experiment was conducted for 10 wk with 36 cows (13 primiparous and 23 multiparous), including 6 ruminally cannulated cows. The experimental period, 6 wk, was preceded by 2-wk adaptation and 2-wk covariate periods. Cows were blocked by parity, days in milk, milk yield, and rumen cannulation and randomly assigned to one of the following diets: a diet with a positive MP balance (+44 g/d) and 16.7% dietary crude protein (CP) concentration (AMP); a diet deficient in MP (-156 g/d) and 14.8% CP concentration (DMP); or DMP supplemented with approximately 500 g of coconut oil/head per day (DMPCO). Ruminal ammonia tended to be greater and plasma urea N (20.1, 12.8, and 13.1 mg/dL, for AMP, DMP, and DMPCO diets, respectively) and milk urea N (12.5, 8.3, and 9.5mg/dL, respectively) were greater for AMP compared with DMP and DMPCO. The DMPCO diet decreased total protozoa counts (by 60%) compared with DMP, but had no effect on the methanogens profile in the rumen. Total tract apparent digestibility of dry matter and CP was decreased by DMP compared with AMP. Fiber digestibility was lower for both DMP and DMPCO compared with AMP. Urinary N excretion was decreased (by 37%) by both DMP and DMPCO compared with AMP. The DMP and DMPCO diets resulted in greater milk N efficiency compared with AMP (32.0 and 35.1 vs. 27.6%, respectively). Milk yield was decreased by both DMP and DMPCO compared with AMP (36.2, 34.4, and 39.3 kg/d, respectively) and coconut oil supplementation suppressed feed intake and caused milk fat depression. Coconut oil supplementation decreased short-chain fatty acid (C4:0, C6:0, and C8:0) concentration and increased medium-chain (C12:0 and C14:0) and total trans fatty acids in milk. Overall, the MP-deficient diets decreased N losses, but could not sustain milk production in this study. Coconut oil decreased feed intake and similar to DMP, suppressed fiber digestibility. Despite decreased protozoal counts, coconut oil had no effect on the methanogen population in the rumen. Copyright © 2011 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Intransience of functional components and distinctive properties of amla (Indian gooseberry) ice cream during short-term storage.

PubMed

Goraya, Rajpreet Kaur; Bajwa, Usha

2018-05-01

Inclusion of processed amla have been found to enhance the functional properties and nutritional value of ice cream by augmenting the fiber content, total phenols, tannins, ascorbic acid and antioxidant activity. The present investigation assessed the changes in these constituents, color values (L, a* and b*), melting rate, sensory scores and microbiological quality of ice cream containing amla shreds, pulp, preserve, candy and powder during 60 days' storage at - 18 to - 20 °C. The total solids increased slightly whereas the antioxidant activity, total phenols, ascorbic acid and tannins decreased on storage. The L values declined whereas a* and b* values amplified, the rate of change being highest in candy containing sample followed by preserve. The first drip time of all the samples increased whereas melting rate decreased. The overall acceptability scores declined non significantly. Standard plate count of all the ice cream samples decreased significantly whereas yeast and molds were not detected throughout the storage. The psychrophiles were not spotted up to 30 days, thereafter, a small increase was observed.

An extrinsic fiber Fabry-Perot interferometer for dynamic displacement measurement

NASA Astrophysics Data System (ADS)

Pullteap, S.; Seat, H. C.

2015-03-01

A versatile fiber interferometer was proposed for high precision measurement. The sensor exploited a double-cavity within the unique sensing arm of an extrinsic-type fiber Fabry-Perot interferometer to produce the quadrature phase-shifted interference fringes. Interference signal processing was carried out using a modified zero-crossing (fringe) counting technique to demodulate two sets of fringes. The fiber interferometer has been successfully employed for dynamic displacement measurement under different displacement profiles over a range of 0.7 μm to 140 μm. A dedicated computer incorporating the demodulation algorithm was next used to interpret these detected data as well as plot the displacement information with a resolution of λ/64. A commercial displacement sensor was employed for comparison purposes with the experimental data obtained from the fiber interferometer as well as to gauge its performance, resulting in the maximum error of 2.8% over the entire displacement range studied.

Effect of Rice Bran and Wheat Fibers on Microbiological and Physicochemical Properties of Fermented Sausages during Ripening and Storage

PubMed Central

Jung, Ji-Taek; Lee, Jin-kyu; Choi, Yeong-Seok; Lee, Ju-Ho; Choi, Jung-Seok; Choi, Yang-Il; Chung, Yoon-Kyung

2018-01-01

Abstract This study investigated the effect of rice bran fiber (RBF) and wheat fibers (WF) on microbiological and physicochemical properties of fermented sausages during ripening and storage. The experimental design included three treatments: Control, no addition; RBF, 1.5%; and WF, 1.5%. During the ripening periods, the addition of dietary fibers rapidly decreased pH and maintained high water activity values of fermented sausages (p<0.05). Lactic acid bacteria were more prevalent in fermented sausages with rice bran fiber than control and sausages with added wheat fiber. During cold storage, lower pH was observed in sausages with dietary fibers (p<0.05), and the water activity and color values were reduced as the storage period lengthened. Fermented sausages containing dietary fibers were higher in lactic acid bacteria counts, volatile basic nitrogen and 2-thiobarbituric acid reactive substance values compared to the control (p<0.05). The results indicate that, the addition of dietary fibers in the fermented sausages promotes the growth of lactic bacteria and fermentation, and suggests that development of functional fermented sausages is possible. PMID:29805280

A study of the effect of pregnancy on muscle fibers of the rectus abdominis muscle of the rat.

PubMed

Martin, W D

1979-11-01

Samples of the rectus abdominis muscle were taken from Sprague-Dawley rats at 0, 3, 6, 6, 12, 15, 18, and 21 days of pregnancy, and at 1, 3, 6, 9, 12, and 15 days of postpartum. Sections were incubated for actomyosin adenosine triphosphatase activity following preincubation at a basic pH. Muscle fibers within a unit area of each sample were identified as to fiber type according to their enzyme activity, and the population of each type counted. The proportion of each fiber type was calculated and the diameter of 24 fibers of each type measured. No changes were noted in the muscle fiber proportions through the course of the experiment. Differential changes in muscle fiber diameters were noted in each of the three muscle fiber types. Slow oxidative fibers underwent an increase in diameter through the last half of pregnancy. The diameter was further increased as stretch of the muscle was released after birth, and did not decrease in the postpartum period. Fast glycolytic fibers decreased in diameter during the last half of pregnancy, but returned to the prepregnancy diameter in the first postpartum day. The diameter of the fast oxidative glycolytic fibers remained unchanged through the course of pregnacy and in the postpartum period.

Evaluation of a new 240-μm single-use holmium:YAG optical fiber for flexible ureteroscopy.

PubMed

Khemees, Tariq A; Shore, David M; Antiporda, Michael; Teichman, Joel M H; Knudsen, Bodo E

2013-04-01

Numerous holmium:yttrium-aluminum-garnet laser fibers are available for flexible ureteroscopy. Performance and durability of fibers can vary widely among different manufacturers and their product lines with differences within a single product line have been reported. We sought to evaluate a newly developed nontapered, single-use 240-μm fiber, Flexiva™ 200 (Boston Scientific, Natick, MA), during clinical use and in a bench-testing model. A total of 100 new fibers were tested after their use in 100 consecutive flexible ureteroscopic lithotripsy procedures by a single surgeon (B.K.). Prospectively recorded clinical parameters were laser pulse energy and frequency settings, total energy delivered and fibers failure. Subsequently, each fiber was bench-tested using an established protocol. Parameters evaluated for were fibers true diameter, flexibility, tip degradation, energy transmission in straight and 180° bend configuration and fibers failure threshold with stress testing. The mean total energy delivered was 2.20 kJ (range 0-18.24 kJ) and most common laser settings used were 0.8 J at 8 Hz, 0.2 J at 50 Hz, and 1.0 J at 10 Hz, respectively. No fiber fractured during clinical procedures. The true fiber diameter was 450 μm. Fiber tips burnt back an average of 1.664 mm, but were highly variable. With laser setting of 400 mJ at 5 Hz, the mean energy transmitted was 451 and 441 mJ in straight and 180° bend configuration, respectively. Thirteen percent of fibers fractured at the bend radius of 0.5 cm with a positive correlation to the total energy transmitted during clinical use identified. Fiber performance was consistent in terms of energy transmission and resistance to fracture when activated in bent configuration. Fiber failure during stress testing showed significant correlation with the total energy delivered during the clinical procedure. The lack of fiber fracture during clinical use may reduce the risk of flexible endoscope damage due to fiber failure.

Variable optical attenuator and dynamic mode group equalizer for few mode fibers.

PubMed

Blau, Miri; Weiss, Israel; Gerufi, Jonathan; Sinefeld, David; Bin-Nun, Moran; Lingle, Robert; Grüner-Nielsen, Lars; Marom, Dan M

2014-12-15

Variable optical attenuation (VOA) for three-mode fiber is experimentally presented, utilizing an amplitude spatial light modulator (SLM), achieving up to -28dB uniform attenuation for all modes. Using the ability to spatially vary the attenuation distribution with the SLM, we also achieve up to 10dB differential attenuation between the fiber's two supported mode group (LP₀₁ and LP₁₁). The spatially selective attenuation serves as the basis of a dynamic mode-group equalizer (DME), potentially gain-balancing mode dependent optical amplification. We extend the experimental three mode DME functionality with a performance analysis of a fiber supporting 6 spatial modes in four mode groups. The spatial modes' distribution and overlap limit the available dynamic range and performance of the DME in the higher mode count case.

Confocal microscopy for automatic measurement of the density and distance between elastin fibers of histologic preparations of normotensive and hypertensive patients

NASA Astrophysics Data System (ADS)

Vieira, G.; Ferro, D. P.; Adam, R. L.; de Thomaz, A. A.; Cesar, C. L.; Metze, K.

2010-02-01

Elastic fibers are essential components of the human aorta, and there is an association between elastin fibers remodeling and several diseases. Hypertension is one such example of a disease leading to elastin fibers remodeling. These fibers can be easily seen in eosin-hematoxilin (HE) stained histologic sections when observed by UV-excited fluorescence microscopy or by a much more precise Laser Scanning Confocal Microscope (LSCM). In order to study the effect of the hypertension on the elastin fibers pattern we developed an automatic system (software and hardware) to count the number of elastin fibers and to measure the distance between them in a LSCM and used it compare the statistical distribution of the distance between these fibers in normotensive and hypertensive patients. The full image of the whole sample (2 or 3mm long) was composed by several 220×220μm frames with 512×512 pixels. The software counters fiber and distance between fibers. We compared the elastic fiber texture in routinely HE-stained histologic slides of the aorta ascendens in 24 normotensive and 30 hypertensive adult patients of both sexes and of similar age from our autopsy files. Our results show that the average number of fibers is the same for both cases but the distance between the fibers are larger for hypertensive patients than for normotensive ones.

Apparatus for Sizing and Rewinding Graphite Fibers

NASA Technical Reports Server (NTRS)

Wilson, M. L.; Stanfield, C. E.

1986-01-01

Equipment ideally suited for research and development of new sizing solutions. Designed expecially for applying thermoplastic sizing solutions to graphite tow consisting of 3,000 to 12,000 filaments per tow, but accommodates other solutions, filament counts, and materials other than graphite. Closed system containing highly volatile methylene chloride vapors. Also ventilation system directly over resin reservoir. Concept used to apply sizing compounds on fiber tows or yarn-type reinforcement materials used in composite technology. Sizing solutions consist of compounds compatible with thermosets as well as thermoplastics.

Oxide Ceramic Fibers by the Sol-Gel Methods

DTIC Science & Technology

1989-02-10

AFWAL-TR-88-4199 OXIDE CERAMIC FIBERS BY THE SOL-GEL METHOD J . D. Mackenzie If) K. Ono The Regents of the University of California (Los Angeles) V...METHOD 12. PERSONAL AUTHOR(S) J . D. MACKENZIE, K. ONO 13a. TYPE OF REPORT 13b. TIME COVERED 114. DATE OF REPORT (Year,Month, Day) 15. PAGE COUNT...to Mary Colby who performed, under the direction of J . D. Mackenzie, the bulk of the experimental studies and contributed extensively to the

Fiber Treatment Effects on Bioreactor Bulk Fluid Trends

NASA Technical Reports Server (NTRS)

Ellis, Ronald II

2013-01-01

In order to facilitate the exploration of worlds beyond the borders of our planet, it is necessary to maintain sustainable levels of clean water. The remediation of water via Membrane Aerated Bioreactors (MABRs) is one such method, and the focus of this study. MARRs rely on healthy biofilms grown on hollow fiber membranes to clean non-potable water. These biofilms can take weeks to months to establish. Therefore, various fiber treatments and two inoculums were evaluated for their effect on rapid biofilm formation. Fiber treatments are as follows: sanding of the fibers with 1500 and 8000 grit sandpaper, immersion of the fibers in a 1% hydrofluoric acid solution for 12 seconds and 15 minutes, and the immersion of the fibers in a Fluoroetch® solution for 18 seconds and 5 minutes. The two inoculums utilized were sourced from healthy, established MARRs; Texas Tech University (TTU) MABR "TRL5" and Kennedy Space Center (KSC) MABR "R3". Data attained from direct bacterial cell counts of the reactor bulk fluids via fluorescent microscopy, suggests that the fluoroetching treatment combined with the TTU inoculum show the greatest biofilm creation.

Forecasting models for sugi (Cryptomeria japonica D. Don) pollen count showing an alternate dispersal rhythm.

PubMed

Ito, Yukiko; Hattori, Reiko; Mase, Hiroki; Watanabe, Masako; Shiotani, Itaru

2008-12-01

Pollen information is indispensable for allergic individuals and clinicians. This study aimed to develop forecasting models for the total annual count of airborne pollen grains based on data monitored over the last 20 years at the Mie Chuo Medical Center, Tsu, Mie, Japan. Airborne pollen grains were collected using a Durham sampler. Total annual pollen count and pollen count from October to December (OD pollen count) of the previous year were transformed to logarithms. Regression analysis of the total pollen count was performed using variables such as the OD pollen count and the maximum temperature for mid-July of the previous year. Time series analysis revealed an alternate rhythm of the series of total pollen count. The alternate rhythm consisted of a cyclic alternation of an "on" year (high pollen count) and an "off" year (low pollen count). This rhythm was used as a dummy variable in regression equations. Of the three models involving the OD pollen count, a multiple regression equation that included the alternate rhythm variable and the interaction of this rhythm with OD pollen count showed a high coefficient of determination (0.844). Of the three models involving the maximum temperature for mid-July, those including the alternate rhythm variable and the interaction of this rhythm with maximum temperature had the highest coefficient of determination (0.925). An alternate pollen dispersal rhythm represented by a dummy variable in the multiple regression analysis plays a key role in improving forecasting models for the total annual sugi pollen count.

Dietary fiber intake and total mortality: a meta-analysis of prospective cohort studies.

PubMed

Kim, Youngyo; Je, Youjin

2014-09-15

Greater intake of dietary fiber has been associated with lower risk of several chronic diseases. Some observational studies have examined the association between dietary fiber intake and total mortality, but the results were inconclusive. We conducted a meta-analysis of data from prospective cohort studies to quantitatively assess the association. Eligible studies were identified by searching the PubMed and Embase databases for all articles published through November 30, 2013, and by reviewing the reference lists of retrieved articles. Study-specific estimates adjusting for potential confounders were combined to calculate a pooled relative risk and 95% confidence interval using a random-effects model. Seven prospective cohort studies of dietary fiber intake and total mortality, including 62,314 deaths among 908,135 participants, were identified. The pooled adjusted relative risk of total mortality for the highest category of dietary fiber intake versus the lowest was 0.77 (95% confidence interval: 0.74, 0.80). In a dose-response meta-analysis, the pooled adjusted relative risk for a 10-g/day increment of dietary fiber intake was 0.89 (95% confidence interval: 0.85, 0 92). By source of fiber, cereal and, to a lesser extent, vegetable fiber were significantly associated with lower total mortality, while fruit fiber showed no association. In conclusion, high dietary fiber intake may reduce the risk of total mortality. © The Author 2014. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Consumption of total fiber and types of fiber are associated with a lower prevalence of obesity and abdominal adiposity in US adults. NHANES 1999-2006.

USDA-ARS?s Scientific Manuscript database

In this cross-sectional study, an inverse association was found between intakes of total dietary fiber and five types of fiber with Body Mass Index, waist circumference, and percent obese, and with increased waist circumference. Intake of vegetable fiber was not associated with any of the weight mea...

Relationship between shift work and peripheral total and differential leukocyte counts in Chinese steel workers.

PubMed

Lu, Li-Fen; Wang, Chao-Ping; Tsai, I-Ting; Hung, Wei-Chin; Yu, Teng-Hung; Wu, Cheng-Ching; Hsu, Chia-Chang; Lu, Yung-Chuan; Chung, Fu-Mei; Jean, Mei-Chu Yen

2016-01-01

Even though shift work has been suspected to be a risk factor for cardiovascular disease, little research has been done to determine the logical underlying inflammation mechanisms. This study investigated the association between shift work and circulating total and differential leukocyte counts among Chinese steel workers. The subjects were 1,654 line workers in a steel plant, who responded to a cross-sectional survey with a questionnaire on basic attributes, life style, and sleep. All workers in the plant received a periodic health checkup. Total and differential leukocytes counts were also examined in the checkup. Shift workers had higher rates of alcohol use, smoking, poor sleep, poor physical exercise, and obesity than daytime workers. In further analysis, we found that the peripheral total WBC, monocyte, neutrophil, and lymphocyte counts were also greater in shift workers than in daytime workers. When subjects were divided into quartiles according to total WBC, neutrophil, monocyte, and lymphocyte counts, increased leukocyte count was associated with shift work. Using stepwise linear regression analysis, smoking, obesity, and shift work were independently associated with total WBC, monocyte, neutrophil, and lymphocyte counts. This study indicates that peripheral total and differential leukocyte counts are significantly higher in shift workers, which suggests that shift work may be a risk factor of cardiovascular disease. Applicable intervention strategies are needed for prevention of cardiovascular disease for shift workers.

Increment of absolute neutrophil count in the third trimester and increased risk of small-for-gestational-age birth: Hirakata Risk Associated with Pregnancy Assessment Research (HIRAPAR).

PubMed

Harita, Nobuko; Kariya, Masatoshi; Hayashi, Tomoshige; Sato, Kyoko Kogawa; Nakamura, Kimihiko; Endo, Ginji; Narimoto, Katsuhiko

2012-09-01

Small-for-gestational-age (SGA) infants, who have growth restriction, have higher perinatal morbidity and mortality. Excessive inflammatory reaction such as neutrophil activation has been observed in pregnant women whose offspring had restricted fetal growth, but the association between white blood cell (WBC) counts and SGA birth has not yet been assessed. We therefore examined the association of WBC count and its change with the risk of SGA birth. We enrolled 2356 pregnant women who had full-term singleton delivery at a private maternity hospital in Hirakata, Japan. SGA was defined as under the 10th percentile of birthweight for gestational age, baby sex, and mother's parity according to the Japanese neonatal anthropometric charts renewed in 2010. Blood samples were measured in the first and third trimesters. We performed multiple logistic regression analysis to assess associations between total and differential WBC counts and SGA birth. Women with SGA birth tended to have higher total WBC count in the third trimester compared with women who did not have SGA birth. This tendency was not observed for total WBC count in the first trimester. After adjustment for age, height, body mass index at entry, smoking habit, weekly gestational weight gain, and pregnancy-induced hypertension, higher total WBC count in the third trimester was associated with an increased risk of SGA birth. Total WBC count in the first trimester did not show any significant association with SGA birth. The ratio of total WBC count in the third trimester to that in the first trimester was associated with SGA birth; the odds ratio for 1 unit increase was 3.02 (95% CI: 1.54-5.92). Regarding differential WBC counts in the third trimester, neutrophil count but not lymphocyte count was associated positively with SGA birth. Higher total WBC and absolute neutrophil counts in the third trimester were associated with SGA birth. In addition, greater ratio of increase in total WBC counts during pregnancy showed a positive association with the incidence of SGA birth. These associations may reflect a vicious cycle of inflammation and placental dysfunction as a cause of fetal growth restriction. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

A prospective analysis of the association between dietary fiber intake and prostate cancer risk in EPIC.

PubMed

Suzuki, Reiko; Allen, Naomi E; Key, Timothy J; Appleby, Paul N; Tjønneland, Anne; Johnsen, Nina Føns; Jensen, Majken K; Overvad, Kim; Boeing, Heiner; Pischon, Tobias; Kaaks, Rudolf; Rohrmann, Sabine; Trichopoulou, Antonia; Misirli, Gesthimani; Trichopoulos, Dimitrios; Bueno-de-Mesquita, H Bas; van Duijnhoven, Fränzel; Sacerdote, Carlotta; Pala, Valeria; Palli, Domenico; Tumino, Rosario; Ardanaz, Eva; Quirós, José Ramón; Larrañaga, Nerea; Sánchez, Maria-José; Tormo, María-José; Jakszyn, Paula; Johansson, Ingegerd; Stattin, Pär; Berglund, Göran; Manjer, Jonas; Bingham, Sheila; Khaw, Kay-Tee; Egevad, Lars; Ferrari, Pietro; Jenab, Mazda; Riboli, Elio

2009-01-01

Few studies have examined the association between dietary fiber intake and prostate cancer risk. We evaluated the association between dietary fiber intake and the risk of prostate cancer among 142,590 men in the European Prospective Investigation into Cancer and Nutrition (EPIC). Consumption of dietary fiber (total, cereal, fruit and vegetable fiber) was estimated by validated dietary questionnaires and calibrated using 24-hr dietary recalls. Incidence rate ratios were estimated using Cox regression and adjusted for potential confounding factors. During an average of 8.7 years follow-up, prostate cancer was diagnosed in 2,747 men. Overall, there was no association between dietary fiber intake (total, cereal, fruit or vegetable fiber) and prostate cancer risk, although calibrated intakes of total fiber and fruit fiber were associated with nonstatistically significant reductions in risk. There was no association between fiber derived from cereals or vegetables and risk and no evidence for heterogeneity in any of the risk estimates by stage or grade of disease. Our results suggest that dietary fiber intake is not associated with prostate cancer risk.

Dual pH durability studies of man-made vitreous fiber (MMVF).

PubMed Central

Bauer, J F; Law, B D; Hesterberg, T W

1994-01-01

Dissolution of fibers in the deep lung may involve both extracellular and intracellular mechanisms. This process was modeled in vitro for each environment using an experimental flow-through system to characterize both total dissolution and specific chemical changes for three representative MMVF's: a glasswool, a slagwool, and a refractory ceramic fiber (RCF). Synthetic physiological fluids at pH 4 and at pH 7.6 were used to simulate macrophage intraphagolysosomal, and extracellular environments, respectively. Actual commercial fiber, sized to rat-respirable dimension, having an average fiber diameter of 1 micron and an average length between 15 and 25 microns, was used in the experiments. Fiber dissolution was monitored through change in chemistry of the fluid collected after percolation at a constant rate through a thin bed of sample. There are great differences in total fiber dissolution rates for the different fibers. Slagwool and RCF dissolve more rapidly at pH 4 than at pH 7.6, while the reverse is true for glasswool. Dissolution is sometimes accompanied by a noticeable change in fiber morphology or dimension, and sometimes by no change. There is strong dependency on pH, which affects not only total fiber dissolution, but also the leaching of specific chemical components. This effect is different for each type of fiber, indicating that specific fiber chemistry largely controls whether a fiber dissolves or leaches more rapidly under acidic or neutral conditions. Both total dissolution rates and calculated fiber composition changes are valuable guides to interpreting in vivo behavior of man-made vitreous fibers, and demonstrate the usefulness of in vitro acellular experiments in understanding overall fiber persistence. Images Figure 3. A Figure 3. B Figure 4. A Figure 4. B Figure 4. C PMID:7882957

Human adipose tissue mesenchymal stromal cells and their extracellular vesicles act differentially on lung mechanics and inflammation in experimental allergic asthma.

PubMed

de Castro, Ligia Lins; Xisto, Debora Gonçalves; Kitoko, Jamil Zola; Cruz, Fernanda Ferreira; Olsen, Priscilla Christina; Redondo, Patricia Albuquerque Garcia; Ferreira, Tatiana Paula Teixeira; Weiss, Daniel Jay; Martins, Marco Aurélio; Morales, Marcelo Marcos; Rocco, Patricia Rieken Macedo

2017-06-24

Asthma is a chronic inflammatory disease that can be difficult to treat due to its complex pathophysiology. Most current drugs focus on controlling the inflammatory process, but are unable to revert the changes of tissue remodeling. Human mesenchymal stromal cells (MSCs) are effective at reducing inflammation and tissue remodeling; nevertheless, no study has evaluated the therapeutic effects of extracellular vesicles (EVs) obtained from human adipose tissue-derived MSCs (AD-MSC) on established airway remodeling in experimental allergic asthma. C57BL/6 female mice were sensitized and challenged with ovalbumin (OVA). Control (CTRL) animals received saline solution using the same protocol. One day after the last challenge, each group received saline, 10 5 human AD-MSCs, or EVs (released by 10 5  AD-MSCs). Seven days after treatment, animals were anesthetized for lung function assessment and subsequently euthanized. Bronchoalveolar lavage fluid (BALF), lungs, thymus, and mediastinal lymph nodes were harvested for analysis of inflammation. Collagen fiber content of airways and lung parenchyma were also evaluated. In OVA animals, AD-MSCs and EVs acted differently on static lung elastance and on BALF regulatory T cells, CD3 + CD4 + T cells, and pro-inflammatory mediators (interleukin [IL]-4, IL-5, IL-13, and eotaxin), but similarly reduced eosinophils in lung tissue, collagen fiber content in airways and lung parenchyma, levels of transforming growth factor-β in lung tissue, and CD3 + CD4 + T cell counts in the thymus. No significant changes were observed in total cell count or percentage of CD3 + CD4 + T cells in the mediastinal lymph nodes. In this immunocompetent mouse model of allergic asthma, human AD-MSCs and EVs effectively reduced eosinophil counts in lung tissue and BALF and modulated airway remodeling, but their effects on T cells differed in lung and thymus. EVs may hold promise for asthma; however, further studies are required to elucidate the different mechanisms of action of AD-MSCs versus their EVs.

A photon-counting photodiode array detector for far ultraviolet (FUV) astronomy

NASA Technical Reports Server (NTRS)

Hartig, G. F.; Moos, H. W.; Pembroke, R.; Bowers, C.

1982-01-01

A compact, stable, single-stage intensified photodiode array detector designed for photon-counting, far ultraviolet astronomy applications employs a saturable, 'C'-type MCP (Galileo S. MCP 25-25) to produce high gain pulses with a narrowly peaked pulse height distribution. The P-20 output phosphor exhibits a very short decay time, due to the high current density of the electron pulses. This intensifier is being coupled to a self-scanning linear photodiode array which has a fiber optic input window which allows direct, rigid mechanical coupling with minimal light loss. The array was scanned at a 250 KHz pixel rate. The detector exhibits more than adequate signal-to-noise ratio for pulse counting and event location.

Fabrication of a multi-walled carbon nanotube-deposited glass fiber air filter for the enhancement of nano and submicron aerosol particle filtration and additional antibacterial efficacy.

PubMed

Park, Jae Hong; Yoon, Ki Young; Na, Hyungjoo; Kim, Yang Seon; Hwang, Jungho; Kim, Jongbaeg; Yoon, Young Hun

2011-09-01

We grew multi-walled carbon nanotubes (MWCNTs) on a glass fiber air filter using thermal chemical vapor deposition (CVD) after the filter was catalytically activated with a spark discharge. After the CNT deposition, filtration and antibacterial tests were performed with the filters. Potassium chloride (KCl) particles (<1 μm) were used as the test aerosol particles, and their number concentration was measured using a scanning mobility particle sizer. Antibacterial tests were performed using the colony counting method, and Escherichia coli (E. coli) was used as the test bacteria. The results showed that the CNT deposition increased the filtration efficiency of nano and submicron-sized particles, but did not increase the pressure drop across the filter. When a pristine glass fiber filter that had no CNTs was used, the particle filtration efficiencies at particle sizes under 30 nm and near 500 nm were 48.5% and 46.8%, respectively. However, the efficiencies increased to 64.3% and 60.2%, respectively, when the CNT-deposited filter was used. The reduction in the number of viable cells was determined by counting the colony forming units (CFU) of each test filter after contact with the cells. The pristine glass fiber filter was used as a control, and 83.7% of the E. coli were inactivated on the CNT-deposited filter. Copyright © 2011 Elsevier B.V. All rights reserved.

Testing the Accuracy of Aerial Surveys for Large Mammals: An Experiment with African Savanna Elephants (Loxodonta africana).

PubMed

Schlossberg, Scott; Chase, Michael J; Griffin, Curtice R

2016-01-01

Accurate counts of animals are critical for prioritizing conservation efforts. Past research, however, suggests that observers on aerial surveys may fail to detect all individuals of the target species present in the survey area. Such errors could bias population estimates low and confound trend estimation. We used two approaches to assess the accuracy of aerial surveys for African savanna elephants (Loxodonta africana) in northern Botswana. First, we used double-observer sampling, in which two observers make observations on the same herds, to estimate detectability of elephants and determine what variables affect it. Second, we compared total counts, a complete survey of the entire study area, against sample counts, in which only a portion of the study area is sampled. Total counts are often considered a complete census, so comparing total counts against sample counts can help to determine if sample counts are underestimating elephant numbers. We estimated that observers detected only 76% ± SE of 2% of elephant herds and 87 ± 1% of individual elephants present in survey strips. Detectability increased strongly with elephant herd size. Out of the four observers used in total, one observer had a lower detection probability than the other three, and detectability was higher in the rear row of seats than the front. The habitat immediately adjacent to animals also affected detectability, with detection more likely in more open habitats. Total counts were not statistically distinguishable from sample counts. Because, however, the double-observer samples revealed that observers missed 13% of elephants, we conclude that total counts may be undercounting elephants as well. These results suggest that elephant population estimates from both sample and total counts are biased low. Because factors such as observer and habitat affected detectability of elephants, comparisons of elephant populations across time or space may be confounded. We encourage survey teams to incorporate detectability analysis in all aerial surveys for mammals.

Testing the Accuracy of Aerial Surveys for Large Mammals: An Experiment with African Savanna Elephants (Loxodonta africana)

PubMed Central

Schlossberg, Scott; Chase, Michael J.; Griffin, Curtice R.

2016-01-01

Accurate counts of animals are critical for prioritizing conservation efforts. Past research, however, suggests that observers on aerial surveys may fail to detect all individuals of the target species present in the survey area. Such errors could bias population estimates low and confound trend estimation. We used two approaches to assess the accuracy of aerial surveys for African savanna elephants (Loxodonta africana) in northern Botswana. First, we used double-observer sampling, in which two observers make observations on the same herds, to estimate detectability of elephants and determine what variables affect it. Second, we compared total counts, a complete survey of the entire study area, against sample counts, in which only a portion of the study area is sampled. Total counts are often considered a complete census, so comparing total counts against sample counts can help to determine if sample counts are underestimating elephant numbers. We estimated that observers detected only 76% ± SE of 2% of elephant herds and 87 ± 1% of individual elephants present in survey strips. Detectability increased strongly with elephant herd size. Out of the four observers used in total, one observer had a lower detection probability than the other three, and detectability was higher in the rear row of seats than the front. The habitat immediately adjacent to animals also affected detectability, with detection more likely in more open habitats. Total counts were not statistically distinguishable from sample counts. Because, however, the double-observer samples revealed that observers missed 13% of elephants, we conclude that total counts may be undercounting elephants as well. These results suggest that elephant population estimates from both sample and total counts are biased low. Because factors such as observer and habitat affected detectability of elephants, comparisons of elephant populations across time or space may be confounded. We encourage survey teams to incorporate detectability analysis in all aerial surveys for mammals. PMID:27755570

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, Kyoungsoo, E-mail: kpark16@illinois.ed; Paulino, Glaucio H.; Roesler, Jeffery

A simple, effective, and practical constitutive model for cohesive fracture of fiber reinforced concrete is proposed by differentiating the aggregate bridging zone and the fiber bridging zone. The aggregate bridging zone is related to the total fracture energy of plain concrete, while the fiber bridging zone is associated with the difference between the total fracture energy of fiber reinforced concrete and the total fracture energy of plain concrete. The cohesive fracture model is defined by experimental fracture parameters, which are obtained through three-point bending and split tensile tests. As expected, the model describes fracture behavior of plain concrete beams. Inmore » addition, it predicts the fracture behavior of either fiber reinforced concrete beams or a combination of plain and fiber reinforced concrete functionally layered in a single beam specimen. The validated model is also applied to investigate continuously, functionally graded fiber reinforced concrete composites.« less

Essential oil and monensin affect ruminal fermentation and the protozoal population in continuous culture.

PubMed

Ye, D; Karnati, S K R; Wagner, B; Firkins, J L; Eastridge, M L; Aldrich, J M

2018-06-01

The interaction of monensin and essential oil was hypothesized to suppress protozoa and methane production while maintaining normal rumen function. The objective of this study was to determine the effects of feeding monensin (MON) and CinnaGar (CIN, a commercial blend of cinnamaldehyde and garlic oil; Provimi North America, Brookville, OH) on ruminal fermentation characteristics. Continuous culture fermentors (n = 4) were maintained in 4 experimental periods in a 4 × 4 Latin square design. Four dietary treatments were arranged in a 2 × 2 factorial: (1) control diet, 37 g/d of dry matter (40 g/d at ∼92.5% dry matter) of a 50:50 forage:concentrate diet containing no additive; (2) MON at 11 g/909 kg of dry matter; (3) CIN at 0.0043% of dry matter; and (4) a combination of MON and CIN at the levels in (2) and (3). Treatment had no effects on protozoal populations, concentration of NH 3 N, total N flow of effluent, production of total volatile fatty acids, or flows of conjugated linoleic acid and total C18 fatty acids. The MON decreased acetate:propionate ratio and biohydrogenation of both total C18 and 18:1 cis-9 but increased protozoal generation time, concentration of peptide, and flow of 18:1 trans-11. The MON tended to decrease protozoal counts in effluent and flow of 18:0 but tended to increase propionate production. The CIN decreased true organic matter digestibility and protozoal N flow of effluent but increased nonammonia, nonmicrobial N flow. The CIN tended to decrease protozoal counts, microbial N flow, and neutral detergent fiber digestibility but tended to increase biohydrogenation of total C18, 18:2, and 18:3. The CIN tended to increase isovalerate production. The MON and CIN tended to interact for increased methane production and bacterial N flow. A second experiment was conducted to determine the effects of MON and CIN on protozoal nitrogen and cell volume in vitro. Four treatments included (1) control (feed only), (2) feed + 0.0043% dry matter CIN, (3) feed + 2.82 μM MON, and (4) feed + CIN + MON at the same levels as in (2) and (3). With no interactions, MON addition decreased percentage of protozoa that were motile and tended to decrease cell volume at 6 h. The CIN did not affect cell count or other indicators of motility or volume at either 3 or 6 h. Under the conditions of our study, we did not detect an additive response for MON and CIN to decrease protozoal counts or methane production. A 3-dimensional method is suggested to better estimate protozoal cell volume. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

A comparison of manual and electronic counting for total nucleated cell counts on synovial fluid from canine stifle joints.

PubMed

Atilola, M A; Lumsden, J H; Rooke, F

1986-04-01

Synovial fluids collected from the stifle joints of 20 physically normal adult dogs were subjected to cytological examination. A total nucleated cell count was performed on each sample using both an electronic cell counter and a hemocytometer. The mean of the total counts done with the electronic counter was significantly higher (1008 cells/microL) than that obtained manually with the hemocytometer (848 cells/microL).

[Endotoxin Contamination and Correlation with Other Water Quality Parameters of Groundwater from Self-Contained Wells in Beijing].

PubMed

Zhang, Can; Liu, Wen-jun; Ao, Lu; Shi, Yun; An, Dai-zhi; Liu, Zhi-ping

2015-12-01

A survey of endotoxin activity in groundwater from 14 self-contained wells in PLA units stationed in Beijing was conducted by the kinetic-turbid assay of Tachypleus Amebocyte Lysate (TAL). Bacteriological parameters, including total cell counts detected by flow cytometry, heterotrophic plate counts (HPC), standard plate counts and total coliforms were analyzed. Additionally, suspended particles, turbidity, dissolved organic carbon (DOC), and UV₂₅₄ were investigated. Total endotoxin activities ranged from 0. 15 to 13.20 EU · mL⁻¹, free endotoxin activities ranged from 0.10 to 5.29 EU · mL⁻¹ and bound endotoxin activities ranged from 0.01 to 8.60 EU · mL⁻¹. Most of the endotoxins in heavily contaminated groundwater existed as bound endotoxins. As for total endotoxins, the sequence of correlation coefficients with other parameters was total cell counts (r = 0.88 ) > HPC (r = 0.79) > DOC (r = 0.77) > UV₂₅₄ (r = 0.57) > total coliforms (r = 0.50) > standard plate counts (r = 0.49) = turbidity (r = 0. 49) > total particles (r = 0.41). The sequence of correlations of the bound endotoxins with other parameters was total cell counts (r = 0.81) > HPC (r = 0.66) > total coliforms (r = 0.65) > turbidity (r = 0.62) > total particles (r = 0.58) > standard plate counts (r = 0.22). Free endotoxins were correlated with DOC and UV₂₅₄, r = 0.58 and 0.26, respectively. Result showed free endotoxins had a higher correlation with DOC, and a lower correlation with UV₂₅₄.

Preliminary thermal imaging of cotton impurities

USDA-ARS?s Scientific Manuscript database

Discrepancies exist between the Advanced Fiber Information Systems (AFIS) seed coat nep measurements and the seed coat fragment count upon visual inspection. Various studies have indicated that the two techniques may not be sensing the same contaminants as seed coat entities. Thermal imaging is an...

Total airborne mold particle sampling: evaluation of sample collection, preparation and counting procedures, and collection devices.

PubMed

Godish, Diana; Godish, Thad

2008-02-01

This study was conducted to evaluate (i) procedures used to collect, prepare, and count total airborne mold spore/particle concentrations, and (ii) the relative field performance of three commercially available total airborne mold spore/particle sampling devices. Differences between factory and laboratory airflow calibration values of axial fan-driven sampling instruments (used in the study) indicated a need for laboratory calibration using a mass flow meter to ensure that sample results were accurately calculated. An aniline blue-amended Calberla's solution adjusted to a pH of 4.2-4.4 provided good sample mounting/counting results using Dow Corning high vacuum grease, Dow Corning 280A adhesive, and Dow Corning 316 silicone release spray for samples collected using mini-Burkard and Allergenco samplers. Count variability among analysts was most pronounced in 5% counts of relatively low mold particle deposition density samples and trended downward with increased count percentage and particle deposition density. No significant differences were observed among means of 5, 10, and 20% counts and among analysts; a significant interaction effect was observed between analysts' counts and particle deposition densities. Significantly higher mini-Burkard and Air-O-Cell total mold spore/particle counts for 600x vs. 400x (1.9 and 2.3 x higher, respectively), 1000x vs. 600x (1.9 and 2.2 x higher, respectively) and 1000x vs. 400x (3.6 and 4.6 x higher, respectively) comparisons indicated that 1000x magnification counts best quantified total airborne mold spore/particles using light microscopy, and that lower magnification counts may result in unacceptable underreporting of airborne mold spore/particle concentrations. Modest but significantly higher (1.2x) total mold spore concentrations were observed with Allergenco vs. mini-Burkard samples collected in co-located, concurrently operated sampler studies; moderate but significantly higher mini-Burkard count values (1.4x) were observed in similar studies with Air-O-Cell samplers. These count differences were relatively small compared with the large differences observed among three count magnifications.

Dietary fiber and subsequent changes in body weight and waist circumference in European men and women.

PubMed

Du, Huaidong; van der A, Daphne L; Boshuizen, Hendriek C; Forouhi, Nita G; Wareham, Nicolas J; Halkjaer, Jytte; Tjønneland, Anne; Overvad, Kim; Jakobsen, Marianne Uhre; Boeing, Heiner; Buijsse, Brian; Masala, Giovanna; Palli, Dominique; Sørensen, Thorkild I A; Saris, Wim H M; Feskens, Edith J M

2010-02-01

Dietary fiber may play a role in obesity prevention. Until now, the role that fiber from different sources plays in weight change had rarely been studied. Our aim was to investigate the association of total dietary fiber, cereal fiber, and fruit and vegetable fiber with changes in weight and waist circumference. We conducted a prospective cohort study with 89,432 European participants, aged 20-78 y, who were free of cancer, cardiovascular disease, and diabetes at baseline and who were followed for an average of 6.5 y. Dietary information was collected by using validated country-specific food-frequency questionnaires. Multiple linear regression analysis was performed in each center studied, and estimates were combined by using random-effects meta-analyses. Adjustments were made for follow-up duration, other dietary variables, and baseline anthropometric, demographic, and lifestyle factors. Total fiber was inversely associated with subsequent weight and waist circumference change. For a 10-g/d higher total fiber intake, the pooled estimate was -39 g/y (95% CI: -71, -7 g/y) for weight change and -0.08 cm/y (95% CI: -0.11, -0.05 cm/y) for waist circumference change. A 10-g/d higher fiber intake from cereals was associated with -77 g/y (95% CI: -127, -26 g/y) weight change and -0.10 cm/y (95% CI: -0.18, -0.02 cm/y) waist circumference change. Fruit and vegetable fiber was not associated with weight change but had a similar association with waist circumference change when compared with intake of total dietary fiber and cereal fiber. Our finding may support a beneficial role of higher intake of dietary fiber, especially cereal fiber, in prevention of body-weight and waist circumference gain.

Sources and dispersive modes of micro-fibers in the environment.

PubMed

Carr, Steve A

2017-05-01

Understanding the sources and distribution of microfibers (MFs) in the environment is critical if control and remediation measures are to be effective. Microfibers comprise an overwhelming fraction (>85%) of microplastic debris found on shorelines around the world. Although primary sources have not been fully vetted, until recently it was widely believed that domestic laundry discharges were the major source. It was also thought that synthetic fibers and particles having dimensions <5 mm easily bypassed filtration and other solid separation processes at wastewater treatment plants (WWTPs) and entered oceans and surface waters. A more thorough assessment of WWTP effluent discharges indicates, however, that fiber and particulate counts do not support the belief that plants are the primary vectors for fibers entering the environment. This finding may bolster concerns that active and pervasive shedding of fibers from common fabrics and textiles could be contributing significantly, via direct pathways, to burgeoning environmental loads. Integr Environ Assess Manag 2017;13:466-469. © 2017 SETAC. © 2017 SETAC.

Energy Calibration of the Scintillating Optical Fiber Calorimeter Chamber (SOFCAL)

NASA Technical Reports Server (NTRS)

Christl, M. C.; Fountain, W. F.; Parnell, T.; Roberts, F. E.; Gregory, J. C.; Johnson, J.; Takahashi, Y.

1997-01-01

The Scintillating Optical Fiber Calorimeter (SOFCAL) detector is designed to make direct measures of the primary cosmic ray spectrum from -200 GeV/amu - 20 TeV/amu. The primary particles are resolved into groups according to their charge (p, He, CNO, Medium Z, Heavy Z) using both active and passive components integrated into the detector. The principal part of SOFCAL is a thin ionization calorimeter that measures the electromagnetic cascades that result from these energetic particles interacting in the detector. The calorimeter is divided into two sections: a thin passive emulsion/x-ray film calorimeter, and a fiber calorimeter that uses crossing layers of small scintillating optical fibers to sample the energy deposition of the cascades. The energy determination is made by fitting the fiber data to transition curves generated by Monte Carlo simulations. The fiber data must first be calibrated using the electron counts from the emulsion plates in the calorimeter for a small number of events. The technique and results of this calibration will be presented together with samples of the data from a balloon flight.

Baseline toxicity of a chlorobenzene mixture and total body residues measured and estimated with solid-phase microextraction.

PubMed

Leslie, Heather A; Hermens, Joop L M; Kraak, Michiel H S

2004-08-01

Body residues of compounds with a narcotic mode of action that exceed critical levels result in baseline toxicity in organisms. Previous studies have shown that internal concentrations in organisms also can be estimated by way of passive sampling. In this experiment, solid-phase microextraction (SPME) fibers were used as a tool to estimate the body residues, which were then compared to measured levels. Past application of SPME fibers in the assessment of toxicity risk of samples has focused on separate exposure of fibers and organisms, often necessitated by the amount of agitation needed in order to achieve steady state in the fibers within a convenient time period. Uptake kinetic studies have shown that in SPME fibers with thin coatings, equilibrium concentrations can be reached without agitation within the time frame of a toxicity test. In contrast to toxicity experiments to date, the SPME fibers in the current study were exposed concomitantly to the test water with the organisms, ensuring an exposure under the exact same conditions. Fibers and two aquatic invertebrate species were exposed to a mixture of four chlorobenzenes with a narcotic mode of action. The total body residue of these compounds in the organisms was determined, as was the acute toxicity resulting from the accumulation. The total body residues of both species were correlated to the total concentrations in SPME fibers. It was concluded that toxicity could be predicted based on total body residue (TBR) estimates from fiber concentrations.

Short range shooting distance estimation using variable pressure SEM images of the surroundings of bullet holes in textiles.

PubMed

Hinrichs, Ruth; Frank, Paulo Ricardo Ost; Vasconcellos, M A Z

2017-03-01

Modifications of cotton and polyester textiles due to shots fired at short range were analyzed with a variable pressure scanning electron microscope (VP-SEM). Different mechanisms of fiber rupture as a function of fiber type and shooting distance were detected, namely fusing, melting, scorching, and mechanical breakage. To estimate the firing distance, the approximately exponential decay of GSR coverage as a function of radial distance from the entrance hole was determined from image analysis, instead of relying on chemical analysis with EDX, which is problematic in the VP-SEM. A set of backscattered electron images, with sufficient magnification to discriminate micrometer wide GSR particles, was acquired at different radial distances from the entrance hole. The atomic number contrast between the GSR particles and the organic fibers allowed to find a robust procedure to segment the micrographs into binary images, in which the white pixel count was attributed to GSR coverage. The decrease of the white pixel count followed an exponential decay, and it was found that the reciprocal of the decay constant, obtained from the least-square fitting of the coverage data, showed a linear dependence on the shooting distance. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

The Effect of Recombinant Human MG53 Protein on Tourniquet-induced Ischemia Reperfusion Injury in Rat Muscle

DTIC Science & Technology

2014-06-01

blind to the treatment , and the prevalence of damaged fibers was quantitated from 10 10x images from each muscle . Approximately 800 fibers were counted...therapeutic cell membrane repair in treatment of muscular dystrophy . Sci Transl Med. 2012; 4(139):139ra185. 11. Weisleder N, Lin P, Zhao X, Orange M, Zhu H...The effect of recombinant human MG53 protein on tourniquet- induced ischemia reperfusion injury in rat muscle Benjamin T. Corona, Ph.D.1, Koyal Garg

Airborne Lidar Measurements of Atmospheric Pressure Made Using the Oxygen A-Band

NASA Technical Reports Server (NTRS)

Riris, Haris; Rodriquez, Michael; Allan, Graham R.; Hasselbrack, William E.; Stephen, Mark A.; Abshire, James B.

2011-01-01

We report on airborne measurements of atmospheric pressure using a fiber-laser based lidar operating in the oxygen A-band near 765 nm and the integrated path differential absorption measurement technique. Our lidar uses fiber optic technology and non-linear optics to generate tunable laser radiation at 765 nm, which overlaps an absorption line pair in the Oxygen A-band. We use a pulsed time resolved technique, which rapidly steps the laser wavelength across the absorption line pair, a 20 cm telescope and photon counting detector to measure Oxygen concentrations.

Carbon fiber behavior in an enclosed volume

NASA Technical Reports Server (NTRS)

Harvey, M. C.

1979-01-01

Tests were performed to evaluate the behavior of single carbon fibers existing in an enclosed space such as a room of a building. Three general phenomena were explored: the concentration decay rate of a fiber-charged room, the degree of uniform mixing of fibers within a room, and the effects of fibers being redisseminated off deposition surfaces within a room. The results were required in understanding the ratio of total indoor fiber exposure to total outdoor fiber exposure, a quantity essential to risk analysis. Results indicate that decay rate is predictable within acceptable limits and that homogeneous mixing can always be assumed. Some factors of redissemination are identified and effects discussed.

Tutorial for Collecting and Processing Images of Composite Structures to Determine the Fiber Volume Fraction

NASA Technical Reports Server (NTRS)

Conklin, Lindsey

2017-01-01

Fiber-reinforced composite structures have become more common in aerospace components due to their light weight and structural efficiency. In general, the strength and stiffness of a composite structure are directly related to the fiber volume fraction, which is defined as the fraction of fiber volume to total volume of the composite. The most common method to measure the fiber volume fraction is acid digestion, which is a useful method when the total weight of the composite, the fiber weight, and the total weight can easily be obtained. However, acid digestion is a destructive test, so the material will no longer be available for additional characterization. Acid digestion can also be difficult to machine out specific components of a composite structure with complex geometries. These disadvantages of acid digestion led the author to develop a method to calculate the fiber volume fraction. The developed method uses optical microscopy to calculate the fiber area fraction based on images of the cross section of the composite. The fiber area fraction and fiber volume fraction are understood to be the same, based on the assumption that the shape and size of the fibers are consistent in the depth of the composite. This tutorial explains the developed method for optically determining fiber area fraction performed at NASA Langley Research Center.

Effect of ultrafine grinding on physicochemical and antioxidant properties of dietary fiber from wine grape pomace.

PubMed

Zhu, Feng-Mei; Du, Bin; Li, Jun

2014-01-01

Wine grape pomace dietary fiber powders were prepared by superfine grinding, whose effects were investigated on the composition, functional and antioxidant properties of the wine grape pomace dietary fiber products. The results showed that superfine grinding could effectively pulverize the fiber particles to submicron scale. As particle size decrease, the functional properties (water-holding capacity, water-retention capacity, swelling capacity, oil-binding capacity, and nitrite ion absorption capacity) of wine grape pomace dietary fiber were significantly (p < 0.05) decreased and a redistribution of fiber components from insoluble to soluble fractions was observed. The antioxidant activities of wine grape pomace and dietary fiber before and after grinding were in terms of DPPH radical scavenging activity, ABTS diammonium salt radical scavenging activity, ferric reducing antioxidant power, and total phenolic content. Compared with dietary fiber before and after grinding, micronized insoluble dietary fiber showed increased ABTS radical scavenging activity, ferric reducing antioxidant power, and total phenolic content yet decreased DPPH radical scavenging activity. Positive correlations were detected between ABTS radical scavenging activity, ferric reducing antioxidant power, and total phenolic content.

Total dietary fiber intakes in the US population are related to whole grain consumption: results from the National Health and Nutrition Examination Survey 2009 to 2010.

PubMed

Reicks, Marla; Jonnalagadda, Satya; Albertson, Ann M; Joshi, Nandan

2014-03-01

Whole grain (WG) foods have been shown to reduce chronic disease risk and overweight. Total dietary fiber is associated with WG and its health benefits. The purpose was to determine whether associations exist between WG intake (no-WG intake, 0 ounce equivalent [oz eq]; low, >0-<3 oz eq; high, ≥3 oz eq) and total dietary fiber intake among Americans 2 years and older. One-day food intake data from the US National Health and Nutrition Examination Survey 2009 to 2010 (n = 9042) showed that only 2.9% and 7.7% of children/adolescents (2-18 years) and adults (≥19 years) consumed at least 3 WG oz eq/d, respectively. For children/adolescents and adults, individuals in the high WG intake group were 59 and 76 times more likely to fall in the third fiber tertile, respectively, compared with those with no-WG intake. Total dietary fiber intake from food sources varied by WG intake group for children/adolescents and adults with more total dietary fiber consumed from ready-to-eat (RTE) and hot cereals and yeast breads/rolls in the high WG intake group compared with the no-WG intake group. Major WG sources for children/adolescents and adults included yeast bread/rolls (24% and 27%, respectively), RTE cereals (25% and 20%, respectively), and oatmeal (12% and 21%, respectively). Among those with the highest WG intake, WG RTE cereal with no added bran was the greatest contributor to total dietary fiber compared with other RTE cereal types. Whole grain foods make a substantial contribution to total dietary fiber intake and should be promoted to meet recommendations. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

Photon counting photodiode array detector for far ultraviolet (FUV) astronomy

NASA Technical Reports Server (NTRS)

Hartig, G. F.; Moos, H. W.; Pembroke, R.; Bowers, C.

1982-01-01

A compact, stable, single-stage intensified photodiode array detector designed for photon-counting, far ultraviolet astronomy applications employs a saturable, 'C'-type MCP (Galileo S. MCP 25-25) to produce high gain pulses with a narrowly peaked pulse height distribution. The P-20 output phosphor exhibits a very short decay time, due to the high current density of the electron pulses. This intensifier is being coupled to a self-scanning linear photodiode array which has a fiber optic input window which allows direct, rigid mechanical coupling with minimal light loss. The array was scanned at a 250 KHz pixel rate. The detector exhibits more than adequate signal-to-noise ratio for pulse counting and event location. Previously announced in STAR as N82-19118

Effects of chitosan-coated fibers as a scaffold for three-dimensional cultures of rabbit fibroblasts for ligament tissue engineering.

PubMed

Sarukawa, Junichiro; Takahashi, Masaaki; Abe, Masashi; Suzuki, Daisuke; Tokura, Seiichi; Furuike, Tetsuya; Tamura, Hiroshi

2011-01-01

Material selection in tissue-engineering scaffolds is one of the primary factors defining cellular response and matrix formation. In this study, we fabricated chitosan-coated poly(lactic acid) (PLA) fiber scaffolds to test our hypothesis that PLA fibers coated with chitosan highly promoted cell supporting properties compared to those without chitosan. Both PLA fibers (PLA group) and chitosan-coated PLA fibers (PLA-chitosan group) were fabricated for this study. Anterior cruciate ligament (ACL) fibroblasts were isolated from Japanese white rabbits and cultured on scaffolds consisting of each type of fiber. The effects of cell adhesivity, proliferation, and synthesis of the extracellular matrix (ECM) for each fiber were analyzed by cell counting, hydroxyproline assay, scanning electron microscopy and quantitative RT-PCR. Cell adhesivity, proliferation, hydroxyproline content and the expression of type-I collagen mRNA were significantly higher in the PLA-chitosan group than in the PLA group. Scanning electron microscopic observation showed that fibroblasts proliferated with a high level of ECM synthesis around the cells. Chitosan coating improved ACL fibroblast adhesion and proliferation, and had a positive effect on matrix production. Thus, the advantages of chitosan-coated PLA fibers show them to be a suitable biomaterial for ACL tissue-engineering scaffolds.

Platelet count and total and cause-specific mortality in the Women's Health Initiative.

PubMed

Kabat, Geoffrey C; Kim, Mimi Y; Verma, Amit K; Manson, JoAnn E; Lin, Juan; Lessin, Lawrence; Wassertheil-Smoller, Sylvia; Rohan, Thomas E

2017-04-01

We used data from the Women's Health Initiative to examine the association of platelet count with total mortality, coronary heart disease (CHD) mortality, cancer mortality, and non-CHD/noncancer mortality. Platelet count was measured at baseline in 159,746 postmenopausal women and again in year 3 in 75,339 participants. Participants were followed for a median of 15.9 years. Cox proportional hazards models were used to estimate the relative mortality hazards associated with deciles of baseline platelet count and of the mean of baseline + year 3 platelet count. Low and high deciles of both baseline and mean platelet count were positively associated with total mortality, CHD mortality, cancer mortality, and non-CHD/noncancer mortality. The association was robust and was not affected by adjustment for a number of potential confounding factors, exclusion of women with comorbidity, or allowance for reverse causality. Low- and high-platelet counts were associated with all four outcomes in never smokers, former smokers, and current smokers. In this large study of postmenopausal women, both low- and high-platelet counts were associated with total and cause-specific mortality. Copyright © 2017 Elsevier Inc. All rights reserved.

Use of an activity monitor to detect response to treatment in dogs with osteoarthritis.

PubMed

Brown, Dorothy Cimino; Boston, Raymond C; Farrar, John T

2010-07-01

To determine whether an activity monitor (AM) could be used to detect changes in activity in dogs with osteoarthritis treated with carprofen or a placebo. Randomized controlled trial. 70 dogs with no clinically important abnormalities other than osteoarthritis for which they were not currently being treated. Dogs wore an AM continuously for 21 days. On days 8 through 21, the dogs were treated with carprofen (n = 35) or a placebo (35). Total activity counts for days 1 through 7 (baseline) were compared with total activity counts for days 15 through 21 (endpoint). The change in total activity count from baseline to endpoint was assessed within each treatment group as well as between groups. Linear regression analysis was performed to test for an association between treatment and percentage change in activity counts while controlling for other variables. For placebo-treated dogs, median baseline total activity count was not significantly different from median endpoint total activity count (1,378,408 vs 1,310,112, respectively). For dogs receiving carprofen, there was a significant increase in median activity count from baseline to endpoint (1,276,427 vs 1,374,133). When age and baseline activity counts were controlled for, dogs in the carpofen-treated group had a 20% increase in activity counts, compared with placebo-treated dogs (95% confidence interval, 10% to 26%). Results suggested that the AM used in the present study may be a valid outcome assessment tool for documenting improved activity associated with treatment in dogs with osteoarthritis.

Total mesophilic counts underestimate in many cases the contamination levels of psychrotrophic lactic acid bacteria (LAB) in chilled-stored food products at the end of their shelf-life.

PubMed

Pothakos, Vasileios; Samapundo, Simbarashe; Devlieghere, Frank

2012-12-01

The major objective of this study was to determine the role of psychrotrophic lactic acid bacteria (LAB) in spoilage-associated phenomena at the end of the shelf-life of 86 various packaged (air, vacuum, modified-atmosphere) chilled-stored retail food products. The current microbiological standards, which are largely based on the total viable mesophilic counts lack discriminatory capacity to detect psychrotrophic LAB. A comparison between the total viable counts on plates incubated at 30 °C (representing the mesophiles) and at 22 °C (indicating the psychrotrophs) for 86 food samples covering a wide range - ready-to-eat vegetable salads, fresh raw meat, cooked meat products and composite food - showed that a consistent underestimation of the microbial load occurs when the total aerobic mesophilic counts are used as a shelf-life parameter. In 38% of the samples, the psychrotrophic counts had significantly higher values (+0.5-3 log CFU/g) than the corresponding total aerobic mesophilic counts. A total of 154 lactic acid bacteria, which were unable to proliferate at 30 °C were isolated. In addition, a further 43 with a poor recovery at this temperature were also isolated. This study highlights the potential fallacy of the total aerobic mesophilic count as a reference shelf-life parameter for chilled food products as it can often underestimate the contamination levels at the end of the shelf-life. Copyright © 2012 Elsevier Ltd. All rights reserved.

Inverse association between fruit, legume, and cereal fiber and the risk of metabolic syndrome: Tehran Lipid and Glucose Study.

PubMed

Hosseinpour-Niazi, Somayeh; Mirmiran, Parvin; Sohrab, Golbon; Hosseini-Esfahani, Firoozeh; Azizi, Fereidoun

2011-11-01

To evaluate the association between total dietary fiber and its types and sources with the risk of MetS. This population-based cross-sectional study was conducted on a representative sample of 2457 adults (1327 male and 1130 female), aged 19-84 years. Dietary intake was assessed using a validated semiquantitative food-frequency questionnaire. Anthropometrics, blood pressure, and fasting blood glucose and lipids were measured according to standard protocols. The MetS was defined according to definition by Adult Treatment Panel III. Multivariate-adjusted odds ratio of MetS between highest and lowest quartiles was 0.53 (95% CI: 0.39-0.74; P for trend <0.05) for total dietary fiber, 0.60 (0.43-0.84; P for trend <0.05) for soluble fiber, and 0.51 (0.35-0.72; P for trend <0.05) for insoluble fiber. Among sources of dietary fiber, fruit fiber (OR: 0.51; 95% CI: 0.37-0.72), cereal fiber (0.74; 0.57-0.97), and legume fiber (0.73; 0.53-0.99) were inversely associated with the risk of MetS, after adjustment for confounding factors. Intake of vegetable fiber and nut fiber were unrelated to the risk of MetS. Total dietary fiber, soluble- and insoluble fiber, fruit fiber, cereal fiber and legume fiber were associated with a protective effect for the presence of MetS among this Tehranian population. Crown Copyright © 2011. Published by Elsevier Ireland Ltd. All rights reserved.

Methods for analyzing matched designs with double controls: excess risk is easily estimated and misinterpreted when evaluating traffic deaths.

PubMed

Redelmeier, Donald A; Tibshirani, Robert J

2018-06-01

To demonstrate analytic approaches for matched studies where two controls are linked to each case and events are accumulating counts rather than binary outcomes. A secondary intent is to clarify the distinction between total risk and excess risk (unmatched vs. matched perspectives). We review past research testing whether elections can lead to increased traffic risks. The results are reinterpreted by analyzing both the total count of individuals in fatal crashes and the excess count of individuals in fatal crashes, each time accounting for the matched double controls. Overall, 1,546 individuals were in fatal crashes on the 10 election days (average = 155/d), and 2,593 individuals were in fatal crashes on the 20 control days (average = 130/d). Poisson regression of total counts yielded a relative risk of 1.19 (95% confidence interval: 1.12-1.27). Poisson regression of excess counts yielded a relative risk of 3.22 (95% confidence interval: 2.72-3.80). The discrepancy between analyses of total counts and excess counts replicated with alternative statistical models and was visualized in graphical displays. Available approaches provide methods for analyzing count data in matched designs with double controls and help clarify the distinction between increases in total risk and increases in excess risk. Copyright © 2018 Elsevier Inc. All rights reserved.

High dietary fiber intake is associated with decreased inflammation and all-cause mortality in patients with chronic kidney disease

PubMed Central

Raj Krishnamurthy, Vidya M.; Wei, Guo; Baird, Bradley C.; Murtaugh, Maureen; Chonchol, Michel B.; Raphael, Kalani L.; Greene, Tom; Beddhu, Srinivasan

2016-01-01

Chronic kidney disease is considered an inflammatory state and a high fiber intake is associated with decreased inflammation in the general population. Here, we determined whether fiber intake is associated with decreased inflammation and mortality in chronic kidney disease, and whether kidney disease modifies the associations of fiber intake with inflammation and mortality. To do this, we analyzed data from 14,543 participants in the National Health and Nutrition Examination Survey III. The prevalence of chronic kidney disease (estimated glomerular filtration rate less than 60 ml/min per 1.73 m2) was 5.8%. For each 10-g/day increase in total fiber intake, the odds of elevated serum C-reactive protein levels were decreased by 11% and 38% in those without and with kidney disease, respectively. Dietary total fiber intake was not significantly associated with mortality in those without but was inversely related to mortality in those with kidney disease. The relationship of total fiber with inflammation and mortality differed significantly in those with and without kidney disease. Thus, high dietary total fiber intake is associated with lower risk of inflammation and mortality in kidney disease and these associations are stronger in magnitude in those with kidney disease. Interventional trials are needed to establish the effects of fiber intake on inflammation and mortality in kidney disease. PMID:22012132

Influence of protein deposition on bacterial adhesion to contact lenses.

PubMed

Subbaraman, Lakshman N; Borazjani, Roya; Zhu, Hua; Zhao, Zhenjun; Jones, Lyndon; Willcox, Mark D P

2011-08-01

The aim of the study is to determine the adhesion of Gram positive and Gram negative bacteria onto conventional hydrogel (CH) and silicone hydrogel (SH) contact lens materials with and without lysozyme, lactoferrin, and albumin coating. Four lens types (three SH-balafilcon A, lotrafilcon B, and senofilcon A; one CH-etafilcon A) were coated with lysozyme, lactoferrin, or albumin (uncoated lenses acted as controls) and then incubated in Staphylococcus aureus (Saur 31) or either of two strains of Pseudomonas aeruginosa (Paer 6294 and 6206) for 24 h at 37 °C. The total counts of the adhered bacteria were determined using the H-thymidine method and viable counts by counting the number of colony-forming units on agar media. All three strains adhered significantly lower to uncoated etafilcon A lenses compared with uncoated SH lenses (p < 0.05). Lysozyme coating on all four lens types increased binding (total and viable counts) of Saur 31 (p < 0.05). However, lysozyme coating did not influence P. aeruginosa adhesion (p > 0.05). Lactoferrin coating on lenses increased binding (total and viable counts) of Saur 31 (p < 0.05). Lactoferrin-coated lenses showed significantly higher total counts (p < 0.05) but significantly lower viable counts (p < 0.05) of adhered P. aeruginosa strains. There was a significant difference between the total and viable counts (p < 0.05) that were bound to lactoferrin-coated lenses. Albumin coating of lenses increased binding (total and viable counts) of all three strains (p < 0.05). Lysozyme deposited on contact lenses does not possess antibacterial activity against certain bacterial strains, whereas lactoferrin possess an antibacterial effect against strains of P. aeruginosa.

ZnO:Zn/6LiF scintillator-A low afterglow alternative to ZnS:Ag/6LiF for thermal neutron detection

NASA Astrophysics Data System (ADS)

Sykora, G. Jeff; Schooneveld, Erik M.; Rhodes, Nigel J.

2018-03-01

Current ZnS:Ag/6LiF based scintillation detectors are often count rate limited by the long lifetime afterglow in the scintillator. Despite this drawback, new instruments at neutron scattering facilities, like ISIS in the UK, would still like to use ZnS:Ag/6LiF detectors due to their low gamma sensitivity, high light output, simplicity of detector design and relatively inexpensive production. One particular advantage of ZnS:Ag/6LiF detectors is their ability to provide strong pulse shape discrimination between neutrons and gammas. Despite the advantages of these detectors, it is becoming clear that new and upgraded instruments will be limited by the count rate capability of ZnS:Ag/6LiF, so an alternative scintillator technology with equivalent simplicity is being sought. ZnO:Zn/6LiF is investigated here as a low afterglow alternative to ZnS:Ag/6LiF. Basic scintillation properties of ZnO:Zn are studied and are discussed. Pulse shape discrimination between neutrons and gammas is explored and taken advantage of through simple single photon counting methods. A further step toward a realistic detector for neutron scattering is also taken by fiber coupling the ZnO:Zn/6LiF to a PMT. In an initial study of this fiber coupled configuration, 60Co gamma sensitivity of ∼ 7 × 10-6 is shown and improvements in count rate capability of at least a factor of 6 over ZnS:Ag/6LiF based neutron detectors are demonstrated.

Light diffraction studies of single muscle fibers as a function of fiber rotation.

PubMed Central

Gilliar, W G; Bickel, W S; Bailey, W F

1984-01-01

Light diffraction patterns from single glycerinated frog semitendinosus muscle fibers were examined photographically and photoelectrically as a function of diffraction angle and fiber rotation. The total intensity diffraction pattern indicates that the order maxima change both position and intensity periodically as a function of rotation angle. The total diffracted light, light diffracted above and below the zero-order plane, and light diffracted into individual orders gives information about the fiber's longitudinal and rotational structure and its noncylindrical symmetry. Images FIGURE 2 PMID:6611174

Reference values for maternal total and differential leukocyte counts in different trimesters of pregnancy and the initial postpartum period in western Turkey.

PubMed

Sanci, Muzaffer; Töz, Emrah; Ince, Onur; Özcan, Aykut; Polater, Kevser; Inan, Abdurrahman Hamdi; Beyan, Emrah; Akkaya, Emrah

2017-07-01

The aim of this study was to investigate alterations in the leukocyte and differential leukocyte counts in different trimesters of pregnancy and the initial postpartum period. The study population consisted of 40,325 pregnant women. A full blood count and automated differential leukocyte count were performed and all the haemogram results in the different trimesters of pregnancy were recorded. Percentiles were calculated using statistical software. A total of 82,786 complete blood count evaluations were performed in 40,325 subjects from the 6th to 41st week of pregnancy and in the initial postpartum period. The leukocyte counts increased from the 1st to the 3rd trimester and peaked in the initial postpartum period. Our reference values for the total and differential leukocyte counts may assist clinicians in distinguishing between leukocytosis and pathological elevation of the white blood cell count during pregnancy and the initial postpartum period. Impact statement Pregnancy requires profound adaptation by multiple systems to accommodate the demands of the developing foetus. Similar to all other systems, many haematological changes occur during pregnancy. Studies of normal variation in leukocyte counts were insufficient to distinguish normal from abnormal leukocyte counts during pregnancy and in the initial postpartum period, due to small numbers of patients and a lack of differential leukocyte counts. Without reference leukocyte levels, infections may be more difficult to assess during pregnancy and in the postpartum period. In this study, we report the 3rd, 5th, 10th, 50th, 95th and 99th percentile values for the total and differential leukocyte counts according to trimester in normal pregnancy and the initial postpartum period. Our reference values for the total and differential leukocyte counts in each trimester and the initial postpartum period may assist clinicians in distinguishing between normal leukocytosis and pathological elevation of the white blood cell count during pregnancy and the initial postpartum period. Our results may prevent misdiagnosis of physiological elevated leukocytes as bacterial infection that leads to unnecessary medication use that may compromise the foetus.

Pulmonary and pleural responses in Fischer 344 rats following short-term inhalation of a synthetic vitreous fiber. I. Quantitation of lung and pleural fiber burdens.

PubMed

Gelzleichter, T R; Bermudez, E; Mangum, J B; Wong, B A; Everitt, J I; Moss, O R

1996-03-01

The pleura is an important target tissue of fiber-induced disease, although it is not known whether fibers must be in direct contact with pleural cells to exert pathologic effects. In the present study, we determined the kinetics of fiber movement into pleural tissues of rats following inhalation of RCF-1, a ceramic fiber previously shown to induce neoplasms in the lung and pleura of rats. Male Fischer 344 rats were exposed by nose-only inhalation to RCF-1 at 89 mg/m3 (2645 WHO fibers/cc), 6 hr/day for 5 consecutive days. On Days 5 and 32, thoracic tissues were analyzed to determine pulmonary and pleural fiber burdens. Mean fiber counts were 22 x 10(6)/lung (25 x 10(3)/pleura) at Day 5 and 18 x 10(6)/lung (16 x 10(3)/pleura) at Day 32. Similar geometric mean lengths (GML) and diameters (GMD) of pulmonary fiber burdens were observed at both time points. Values were 5 microns for GML (geometric standard deviation GSD approximately 2.3) and 0.3 micron for GMD (GSD approximately 1.9), with correlations between length and diameter (tau) of 0.2-0.3. Size distributions of pleural fiber burdens at both time points were approximately 1.5 microns GML (GSD approximately 2.0) and 0.09 micron GMD (GSD approximately 1.5; tau approximately 0.2-0.5). Few fibers longer than 5 microns were observed at either time point. These findings demonstrate that fibers can rapidly translocate to pleural tissues. However, only short, thin (< 5 microns in length) fibers could be detected over the 32-day time course of the experiment.

Use of an activity monitor to detect response to treatment in dogs with osteoarthritis

PubMed Central

Brown, Dorothy Cimino; Boston, Raymond C.; Farrar, John T.

2010-01-01

Objective To determine whether an activity monitor (AM) could be used to detect changes in activity in dogs with osteoarthritis treated with carprofen or a placebo. Design Randomized controlled trial. Animals 70 dogs with no clinically important abnormalities other than osteoarthritis for which they were not currently being treated. Procedures Dogs wore an AM continuously for 21 days. On days 8 through 21, the dogs were treated with carprofen (n = 35) or a placebo (35). Total activity counts for days 1 through 7 (baseline) were compared with total activity counts for days 15 through 21 (endpoint). The change in total activity count from baseline to endpoint was assessed within each treatment group as well as between groups. Linear regression analysis was performed to test for an association between treatment and percentage change in activity counts while controlling for other variables. Results For placebo-treated dogs, median baseline total activity count was not significantly different from median endpoint total activity count (1,378,408 vs 1,310,112, respectively). For dogs receiving carprofen, there was a significant increase in median activity count from baseline to endpoint (1,276,427 vs 1,374,133). When age and baseline activity counts were controlled for, dogs in the carpofen-treated group had a 20% increase in activity counts, compared with placebo-treated dogs (95% confidence interval, 10% to 26%). Conclusions and Clinical Relevance Results suggested that the AM used in the present study may be a valid outcome assessment tool for documenting improved activity associated with treatment in dogs with osteoarthritis. PMID:20590496

The long-term performance of electrically charged filters in a ventilation system.

PubMed

Raynor, Peter C; Chae, Soo Jae

2004-07-01

The efficiency and pressure drop of filters made from polyolefin fibers carrying electrical charges were compared with efficiency and pressure drop for filters made from uncharged glass fibers to determine if the efficiency of the charged filters changed with use. Thirty glass fiber filters and 30 polyolefin fiber filters were placed in different, but nearly identical, air-handling units that supplied outside air to a large building. Using two kinds of real-time aerosol counting and sizing instruments, the efficiency of both sets of filters was measured repeatedly for more than 19 weeks while the air-handling units operated almost continuously. Pressure drop was recorded by the ventilation system's computer control. Measurements showed that the efficiency of the glass fiber filters remained almost constant with time. However, the charged polyolefin fiber filters exhibited large efficiency reductions with time before the efficiency began to increase again toward the end of the test. For particles 0.6 microm in diameter, the efficiency of the polyolefin fiber filters declined from 85% to 45% after 11 weeks before recovering to 65% at the end of the test. The pressure drops of the glass fiber filters increased by about 0.40 in. H2O, whereas the pressure drop of the polyolefin fiber filters increased by only 0.28 in. H2O. The results indicate that dust loading reduces the effectiveness of electrical charges on filter fibers. Copyright 2004 JOEH, LLC

Fiber Length Measurement In Pulp And Paper Industry

NASA Astrophysics Data System (ADS)

Piirainen, Raili A.

1986-10-01

For the pulp and paper maker, product quality and production costs are the major factors that determine profitability. Quality has to be high enough to satisfy the customer and costs low enough to maintain competitiveness. Accurate and readily available fiber length information is fast becoming one of the most important control factors to achieve these targets. Measurement of fiber length has been difficult and time consuming in the past --- appli-cation to production almost impossible due to the historical nature of the data. The Kajaani fiber length analyzer has revolutionized fiber length analysis. Even more accurate than the microscopic method and infinitely faster than mechanical classifiers, such as Bauer McNett or Clark classifiers, the Kajaani analyzer opens new horizons for the paper maker. The Kajaani method is an optical method and is based on the ability of fibers to change the direction of light polarization. With no critical sample preparation, the results are ready in a few minutes. During this time, the analyzer counts and measures over 3000 individual fibers. Results are printed out either in graphic or numerical form. Some of the typical applications of the Kajaani fiber length analyzer are to determine hardwood/softwood ratios in pulp and paper mills both in brownstock and stock preparation areas, to predict strength properties of mechanical pulp based on the fiber length information, to measure the coarseness of the fibers, to evaluate screening and refining processes and to check the quality of purchased pulp.

High amount of dietary fiber not harmful but favorable for Crohn disease.

PubMed

Chiba, Mitsuro; Tsuji, Tsuyotoshi; Nakane, Kunio; Komatsu, Masafumi

2015-01-01

Current chronic diseases are a reflection of the westernized diet that features a decreased consumption of dietary fiber. Indigestible dietary fiber is metabolized by gut bacteria, including Faecalibacterium prausnitzii, to butyrate, which has a critical role in colonic homeostasis owing to a variety of functions. Dietary fiber intake has been significantly inversely associated with the risk of chronic diseases. Crohn disease (CD) is not an exception. However, even authors who reported the inverse association between dietary fiber and a risk of CD made no recommendation of dietary fiber intake to CD patients. Some correspondence was against advocating high fiber intake in CD. We initiated a semivegetarian diet (SVD), namely a lacto-ovo-vegetarian diet, for patients with inflammatory bowel disease. Our SVD contains 32.4 g of dietary fiber in 2000 kcal. There was no untoward effect of the SVD. The remission rate with combined infliximab and SVD for newly diagnosed CD patients was 100%. Maintenance of remission on SVD without scheduled maintenance therapy with biologic drugs was 92% at 2 years. These excellent short- and long-term results can be explained partly by SVD. The fecal bacterial count of F prausnitzii in patients with CD is significantly lower than in healthy controls. Diet reviews recommend plant-based diets to treat and to prevent a variety of chronic diseases. SVD belongs to plant-based diets that inevitably contain considerable amounts of dietary fiber. Our clinical experience and available data provide a rationale to recommend a high fiber intake to treat CD.

Effects of Oxaliplatin Treatment on the Myenteric Plexus Innervation and Glia in the Murine Distal Colon.

PubMed

Stojanovska, Vanesa; McQuade, Rachel M; Miller, Sarah; Nurgali, Kulmira

2018-05-01

Oxaliplatin (platinum-based chemotherapeutic agent) is a first-line treatment of colorectal malignancies; its use associates with peripheral neuropathies and gastrointestinal side effects. These gastrointestinal dysfunctions might be due to toxic effects of oxaliplatin on the intestinal innervation and glia. Male Balb/c mice received intraperitoneal injections of sterile water or oxaliplatin (3 mg/kg/d) triweekly for 2 weeks. Colon tissues were collected for immunohistochemical assessment at day 14. The density of sensory, adrenergic, and cholinergic nerve fibers labeled with calcitonin gene-related peptide (CGRP), tyrosine hydroxylase (TH), and vesicular acetylcholine transporter (VAChT), respectively, was assessed within the myenteric plexus of the distal colon. The number and proportion of excitatory neurons immunoreactive (IR) against choline acetyltransferase (ChAT) were counted, and the density of glial subpopulations was determined by using antibodies specific for glial fibrillary acidic protein (GFAP) and s100β protein. Oxaliplatin treatment induced significant reduction of sensory and adrenergic innervations, as well as the total number and proportion of ChAT-IR neurons, and GFAP-IR glia, but increased s100β expression within the myenteric plexus of the distal colon. Treatment with oxaliplatin significantly alters nerve fibers and glial cells in the colonic myenteric plexus, which could contribute to long-term gastrointestinal side effects following chemotherapeutic treatment.

Alterations of fecal steroid composition induced by changes in dietary fiber consumption.

PubMed

Ullrich, I H; Lai, H Y; Vona, L; Reid, R L; Albrink, M J

1981-10-01

The short-term effects of high carbohydrate diets of normal foods either high or low in dietary fiber on fecal steroids and fiber was assessed in eight healthy young men. Each subject consumed in random order for 4 days a diet containing 59 g (high fiber) or 21 g (low fiber) neutral detergent fiber. After a 9-day rest period he consumed the other diet. Analysis of random fecal samples during their usual diet and after 4 days of each experimental diet showed an increased in primary bile acids from less than 4 to 32% of total bile acids, and a decreases of coprostanol from 76% (control diet) or 64% (low fiber diet) to 45% of total neutral sterol after the high fiber diet. Fecal fiber concentration doubled after the high fiber diet. We conclude that 4 days of high fiber diet is sufficient to cause a large increase in primary and decrease in secondary fecal steroids. Such changes have implications for prevention of arteriosclerosis and cancer of the colon.

Optical Couplers

DTIC Science & Technology

1975-12-01

FUNNEL DIAMETER 250 DIA FUNNEL DIAMETER, Df SHOWN IN LIST 375 FUNNEL DIAMETER Df . 043 ,060 .173 .044 .062 .175 .045 .063 .176 .046...Physical Dimensions Nom . Size (mil) Fiber Count V (mi 1) d (mil) [ (nr ) 1) 1 (m- Df 1) 46 285 41 .58 2.463 45 79 46 .71 ^/2x46 570 58

White Blood Cell Count and Total and Cause-Specific Mortality in the Women's Health Initiative.

PubMed

Kabat, Geoffrey C; Kim, Mimi Y; Manson, JoAnn E; Lessin, Lawrence; Lin, Juan; Wassertheil-Smoller, Sylvia; Rohan, Thomas E

2017-07-01

White blood cell (WBC) count appears to predict total mortality and coronary heart disease (CHD) mortality, but it is unclear to what extent the association reflects confounding by smoking, underlying illness, or comorbid conditions. We used data from the Women's Health Initiative to examine the associations of WBC count with total mortality, CHD mortality, and cancer mortality. WBC count was measured at baseline in 160,117 postmenopausal women and again in year 3 in 74,375 participants. Participants were followed for a mean of 16 years. Cox proportional hazards models were used to estimate the relative mortality hazards associated with deciles of baseline WBC count and of the mean of baseline + year 3 WBC count. High deciles of both baseline and mean WBC count were positively associated with total mortality and CHD mortality, whereas the association with cancer mortality was weaker. The association of WBC count with mortality was independent of smoking and did not appear to be influenced by previous disease history. The potential clinical utility of this common laboratory test in predicting mortality risk warrants further study. © The Author 2017. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Secondary cell wall development in cotton fibers as examined with attenuated total reflection Fourier transform infrared spectroscopy

USDA-ARS?s Scientific Manuscript database

Cotton fibers harvested at 18, 20, 24, 28, 32, 36 and 40 days after flowering were examined using attenuated total reflection Fourier transform-infrared (ATR FT-IR) spectroscopy. The selected harvesting points coincide with secondary cell wall (SCW) development in the fibers. Progressive but moderat...

A Mechanical Switch Using Spectral Microshifts

NASA Astrophysics Data System (ADS)

Mitchell, Gordon L.; Saaski, Elric W.; Hartl, James C.

1989-02-01

Among the simplest fiber optic sensors, are those which operate in a binary fashion; they were the first sensor types to be developed. Early experiments with fiber bundles and shutters produced demonstrations of, for example, displacement sensors. Typical applications range from position sensing for aircraft landing gear to counting objects on a production line. Because they frequently replace electrical snap action switches, binary sensors are generally called optical switches. Optical switch applications account for a much larger market than the more complex analog measurements discussed in the balance of this volume. This paper presents an optical switch concept that uses a single fiber and is tolerant of back reflections. The sensor element is a low finesse Fabry-Perot pressure sensor which replaces the electrical contact in a conventional snap action switch.

Search for novel circulating cancer chemopreventive biomarkers of dietary rice bran intervention in Apc(Min) mice model of colorectal carcinogenesis, using proteomic and metabolic profiling strategies.

PubMed

Norris, Leonie; Malkar, Aditya; Horner-Glister, Emma; Hakimi, Amirmansoor; Ng, Leong L; Gescher, Andreas J; Creaser, Colin; Sale, Stewart; Jones, Donald J L

2015-09-01

There is strong epidemiological evidence indicating that consumption by humans of whole-grain foods including rice bran may be associated with a low incidence of cancer, especially in the colorectum. Molecular processes associated with cancer development may be retarded by fiber consumption. Consequently, intervention with dietary fiber might be suitable as a cancer chemoprevention strategy in high-risk populations. Here, we searched for putative molecular mechanism-based efficacy biomarkers of rice fiber consumption in the plasma of mice characterized by a genetic propensity to develop gastrointestinal adenomas. The hypothesis was tested that metabolic and proteomic changes in blood reflect the chemopreventive activity of rice bran. Apc(Min) mice received diet supplemented with rice bran at 5, 15, and 30%. Blood and tissue samples were taken. Plasma was subjected to MS-based proteomic and metabolic profiling analyses as well as assessment of hematocrit values. Gastrointestinal tracts were removed and adenomas were counted and their size was measured so that total tumor burden could be calculated. The hypothesis was tested that metabolic and proteomic changes in blood reflect chemopreventive activity. Rice bran consumption reduced adenoma burden and number in a dose-related fashion when compared to controls. Metabolic profiling data demonstrated strong clustering of the groups indicating that metabolic pathways are perturbed. Proteomic analysis identified adiponectin as a molecule that was significantly altered, which may play a role in tumor suppression. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Assessment of occupational exposure to asbestos fibers: Contribution of analytical transmission electron microscopy analysis and comparison with phase-contrast microscopy.

PubMed

Eypert-Blaison, Céline; Romero-Hariot, Anita; Clerc, Frédéric; Vincent, Raymond

2018-03-01

From November 2009 to October 2010, the French general directorate for labor organized a large field-study using analytical transmission electron microscopy (ATEM) to characterize occupational exposure to asbestos fibers during work on asbestos containing materials (ACM). The primary objective of this study was to establish a method and to validate the feasibility of using ATEM for the analysis of airborne asbestos of individual filters sampled in various occupational environments. For each sampling event, ATEM data were compared to those obtained by phase-contrast optical microscopy (PCOM), the WHO-recommended reference technique. A total of 265 results were obtained from 29 construction sites where workers were in contact with ACM. Data were sorted depending on the combination of the ACM type and the removal technique. For each "ACM-removal technique" combination, ATEM data were used to compute statistical indicators on short, fine and WHO asbestos fibers. Moreover, exposure was assessed taking into account the use of respiratory protective devices (RPD). As in previous studies, no simple relationship was found between results by PCOM and ATEM counting methods. Some ACM, such as asbestos-containing plasters, generated very high dust levels, and some techniques generated considerable levels of dust whatever the ACM treated. On the basis of these observations, recommendations were made to measure and control the occupational exposure limit. General prevention measures to be taken during work with ACM are also suggested. Finally, it is necessary to continue acquiring knowledge, in particular regarding RPD and the dust levels measured by ATEM for the activities not evaluated during this study.

Acoustic emission of retrofitted fiber-wrapped columns

NASA Astrophysics Data System (ADS)

El Echary, Hazem; Mirmiran, Amir

1998-03-01

In recent years, fiber-wrapping technique has become increasingly popular for retrofitting of existing bridge pier columns in seismic zones. By the way of confinement, the external jacket enhances strength, ductility and shear performance of the column. However, since state of the concrete core is not visible from outside of the jacket, it is of great necessity to develop proper non-destructive methods to evaluate structural integrity of the column. Extensive research on FRP-confined concrete at the University of Central Florida has shown that failure of such hybrid columns is often accompanied by considerable audible and sub-audible noise, making acoustic emission (AE) a viable NDE technique for retrofitted columns. Acoustic emission from fiber-wrapped concrete specimens were monitored. A total of 24 concrete specimens with two types of construction (bonded and unbonded) and four different number of layers (1, 3, 5 and 7) were tested under uniaxial compression. All specimens were made of S-glass fabric and polyester resin with a core diameter of 6' and a length of 12'. Some of the specimens were subjected to cycles of loading and unloading to examine the presence of the Kaiser and the Felicity effects. A 4-channel AEDSP-32/16 (Mistras-2001) machine from Physical Acoustics Corp. was used for the experiments. Results indicate that AE energy and the number of AE counts can both be good representatives for the response of confined concrete. Further, plots of AE energy versus load follows the same bilinear trend that has been observed in the stress-strain response of such specimens. Finally, Felicity effect was observed in all composite specimens.

Measuring bacterial growth by refractive index tapered fiber optic biosensor.

PubMed

Zibaii, Mohammad Ismail; Kazemi, Alireza; Latifi, Hamid; Azar, Mahmoud Karimi; Hosseini, Seyed Masoud; Ghezelaiagh, Mohammad Hossein

2010-12-02

A single-mode tapered fiber optic biosensor was utilized for real-time monitoring of the Escherichia coli (E. coli K-12) growth in an aqueous medium. The applied fiber tapers were fabricated using heat-pulling method with waist diameter and length of 6-7μm and 3mm, respectively. The bacteria were immobilized on the tapered surface using Poly-l-Lysine. By providing the proper condition, bacterial population growth on the tapered surface increases the average surface density of the cells and consequently the refractive index (RI) of the tapered region would increase. The adsorption of the cells on the tapered fiber leads to changes in the optical characteristics of the taper. This affects the evanescent field leading to changes in optical throughput. The bacterial growth rate was monitored at room temperature by transmission of a 1558.17nm distributed feedback (DFB) laser through the tapered fiber. At the same condition, after determining the growth rate of E. coli by means of colony counting method, we compared the results with that obtained from the fiber sensor measurements. This novel sensing method, promises new application such as rapid analysis of the presence of bacteria. Copyright © 2010 Elsevier B.V. All rights reserved.

Fiber optic biosensor fabricated for measuring the growth rate of Escherichia coli K-12 in the aqueous

NASA Astrophysics Data System (ADS)

Zibaii, M. I.; Kazemi, A.; Latifi, H.; Karimi Azar, M.; Hosseini, S. M.; Ghezelaiagh, M. H.

2010-09-01

A single-mode tapered fiber optic biosensor was utilized for real-time monitoring of the Escherichia coli (E. coli K-12) growth in an aqueous medium. The applied fiber tapers were fabricated using heat-pulling method with waist diameter and length of 6-7μm and 3mm, respectively. The bacteria were immobilized on the tapered surface using Poly-L-Lysine. By providing the proper condition, bacterial population growth on the tapered surface increases the average surface density of the cells and consequently the refractive index (RI) of the tapered region would increase. The adsorption of the cells on the tapered fiber leads to changes in the optical characteristics of the taper. This affects the evanescent field leading to changes in optical throughput. The bacterial growth rate was monitored at room temperature by transmission of a 1558.17nm distributed feedback (DFB) laser through the tapered fiber. At the same condition, after determining the growth rate of E. coli by means of colony counting method, we compared the results with that obtained from the fiber sensor measurements. This novel sensing method, promises new application such as rapid analysis of the presence of bacteria.

Demonstration of optical rogue waves using a laser diode emitting at 980  nm and a fiber Bragg grating.

PubMed

Lee, Min Won; Baladi, Fadwa; Burie, Jean-René; Bettiati, Mauro A; Boudrioua, Azzedine; Fischer, Alexis P A

2016-10-01

Rogue waves are observed for the first time, to the best of our knowledge, in a 980 nm laser diode subject to filtered optical feedback via a fiber Bragg grating. By counting the number of rogue waves in a fixed time window, a rogue wave map is established experimentally as a function of both the optical feedback ratio and the laser current. The comparison with low frequency fluctuations (LFFs) reveals that the rogue waves observed in our system are, in fact, LFF jump-ups.

Cryptographic robustness of a quantum cryptography system using phase-time coding

DOE Office of Scientific and Technical Information (OSTI.GOV)

Molotkov, S. N.

2008-01-15

A cryptographic analysis is presented of a new quantum key distribution protocol using phase-time coding. An upper bound is obtained for the error rate that guarantees secure key distribution. It is shown that the maximum tolerable error rate for this protocol depends on the counting rate in the control time slot. When no counts are detected in the control time slot, the protocol guarantees secure key distribution if the bit error rate in the sifted key does not exceed 50%. This protocol partially discriminates between errors due to system defects (e.g., imbalance of a fiber-optic interferometer) and eavesdropping. In themore » absence of eavesdropping, the counts detected in the control time slot are not caused by interferometer imbalance, which reduces the requirements for interferometer stability.« less

Abrasion Plus Local Fibrin Sealant Instillation Produces Pleurodesis Similar to Pleurectomy in Rabbits.

PubMed

Marchi, Evaldo; de Carvalho, Marcus V H; Ventureli, Tiago R; Fruchi, Andre J; Lazaro, Ariane; do Carmo, Deborah C; Barreto, Thayssa Y A S; Dias, Bruno V B; Acencio, Milena M P; Teixeira, Lisete R; Light, Richard W

2016-09-01

Pleurodesis performed either by pleurectomy or pleural abrasion is recommended in the approach to primary spontaneous pneumothorax to avoid recurrence. However, the efficacy of parietal pleural abrasion in producing pleurodesis is questioned. This study aims to determine the efficacy of apical abrasion alone, abrasion plus fibrin sealant application, and pleurectomy in producing pleurodesis in rabbits. Rabbits were subjected to video-assisted thoracic surgery alone (control) or to video-assisted thoracic surgery with apical gauze abrasion, abrasion plus fibrin sealant instillation, or apical pleurectomy. Blood samples were collected preoperatively and 48 h and 28 days postoperatively to measure total leukocytes (white blood cell count), neutrophil counts, and serum interleukin (IL)-8 levels. After 28 days the animals were sacrificed for macroscopic evaluation of the degree of apical pleurodesis and microscopic evaluation of local pleural fibrosis and collagen deposition. White blood cell and neutrophil counts were similar in all groups, whereas the serum IL-8 level peaked at 48 h in all groups and decreased after 28 days, except in the pleurectomy group. After 28 days the abrasion plus fibrin sealant and pleurectomy groups had significantly more pleural adhesions, pleural fibrosis, and collagen deposition than the abrasion alone group, mainly due to thick mature fibers. Abrasion with local fibrin sealant instillation is as effective as pleurectomy in producing pleurodesis in rabbits. Apical pleurectomy elicits a more persistent elevation of serum IL-8 levels than apical abrasion alone or abrasion plus fibrin adhesive instillation. Copyright © 2016 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.

Nutritive value and fermentation characteristics of alfalfa-mixed grass forage wrapped with minimal stretch film layers and stored for different lengths of time.

PubMed

Coblentz, W K; Ogden, R K; Akins, M S; Chow, E A

2017-07-01

A key aspect of managing baled silages is to quickly achieve and then rigorously maintain anaerobic conditions within the silage mass. The concept of inserting an O 2 -limiting barrier (OB) into plastic commercial silage wraps has been evaluated previously, yielding mixed or inconclusive results. Our objective for this study was to maximize the challenge to a commercial polyethylene bale wrap, or the identical wrap containing an OB, by using minimal plastic (4 layers), and then extending storage periods as long as 357 d. Forty-eight 1.2 × 1.2-m large-round bales of alfalfa (Medicago sativa L.) and mixed grass forage (66.3 ± 8.66% alfalfa; DM basis) were made at 2 moisture concentrations [47.5 (ideal) or 36.1% (dry)], wrapped with 4 layers of plastic containing an OB or no OB, and then stored for 99, 243, or 357 d. After storage, yeast counts within the 0.15-m deep surface layer were not affected by treatment (mean = 5.85 log 10 cfu/g); mold counts could not be analyzed statistically because 26 bales were nondetectable at a 3.00 log 10 cfu/g detection limit, but means among detectable counts were numerically similar for OB (4.74 log 10 cfu/g) and no OB (4.77 log 10 cfu/g). Fermentation characteristics were most affected by initial bale moisture, resulting in a more acidic final pH for ideal compared with dry bales (5.52 vs. 6.00). This was facilitated by greater concentrations of total fermentation acids (3.80 vs. 1.45% of dry matter), lactic acid (2.24 vs. 0.71% of dry matter), and acetic acid (1.07 vs. 0.64% of dry matter) within ideal compared with dry silages. Plastic wrap type had no effect on final concentrations of any fermentation product. During fermentation and storage, we noted greater change in concentrations of fiber components and whole-plant ash within the 0.15-m deep surface layer than in the bale core, and these changes always differed statistically from 0 (no change) based on pre-ensiled baseline concentrations. Overall, concentrations of water-soluble carbohydrates were reduced (mean = 2.3 percentage units) during fermentation and storage, which resulted (indirectly) in increased concentrations of fiber components and crude protein, as well as an overall energy cost of 2.2 percentage units of total digestible nutrient. It remains unclear under what conditions an OB plastic wrap will consistently benefit the fermentation and preservation of baled silages. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Effect of novel fiber ingredients on ileal and total tract digestibility of energy and nutrients in semi-purified diets fed to growing pigs.

PubMed

Cervantes-Pahm, Sarah K; Liu, Yanhong; Evans, Annette; Stein, Hans H

2014-05-01

Consumption of different dietary fibers may influence the digestibility of carbohydrates and other nutrients. Therefore the objectives of this experiment were to determine the effect of novel fiber ingredients on the apparent ileal digestibility (AID) and apparent total tract digestibility (ATTD) of gross energy (GE), dry matter (DM), crude protein (CP) and total dietary fiber (TDF) in pigs and to calculate the standardized digestibility of analyzed TDF in four novel fiber ingredients. The AID of DM and GE in diets containing novel fiber ingredients was less (P < 0.05) than in a maltodextrin diet. Addition of cellulose or pullulan, but not resistant starch (RS) 60, RS 75 or soluble corn fiber 70, reduced (P < 0.05) the AID of CP. The average ileal and total tract endogenous losses of analyzed TDF were calculated at 25.25 and 42.87 g kg⁻¹ DM intake, respectively. Addition of novel fiber ingredients to a maltodextrin-based diet had different effects on the AID of DM, CP, GE and TDF. Measurements of the standardized digestibility of analyzed TDF may be a better indicator of TDF fermentability than measurements of AID and ATTD of TDF, because some endogenous metabolites may be analyzed as TDF. © 2013 Society of Chemical Industry.

Integrable optical-fiber source of polarization-entangled photon pairs in the telecom band

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li Xiaoying; Liang Chuang; Fook Lee, Kim

We demonstrate an optical-fiber-based source of polarization-entangled photon pairs with improved quality and efficiency, which has been integrated with off-the-shelf telecom components and is, therefore, well suited for quantum communication applications in the 1550-nm telecom band. Polarization entanglement is produced by simultaneously pumping a loop of standard dispersion-shifted fiber with two orthogonally polarized pump pulses, one propagating in the clockwise and the other in the counterclockwise direction. We characterize this source by investigating two-photon interference between the generated signal-idler photon pairs under various conditions. The experimental parameters are carefully optimized to maximize the generated photon-pair correlation and to minimize contaminationmore » of the entangled photon pairs from extraneously scattered background photons that are produced by the pump pulses for two reasons: (i) spontaneous Raman scattering causes uncorrelated photons to be emitted in the signal and idler bands and (ii) broadening of the pump-pulse spectrum due to self-phase modulation causes pump photons to leak into the signal and idler bands. We obtain two-photon interference with visibility >90% without subtracting counts caused by the background photons (only dark counts of the detectors are subtracted), when the mean photon number in the signal (idler) channel is about 0.02/pulse, while no interference is observed in direct detection of either the signal or idler photons.« less

Evaluating remotely sensed plant count accuracy with differing unmanned aircraft system altitudes, physical canopy separations, and ground covers

NASA Astrophysics Data System (ADS)

Leiva, Josue Nahun; Robbins, James; Saraswat, Dharmendra; She, Ying; Ehsani, Reza

2017-07-01

This study evaluated the effect of flight altitude and canopy separation of container-grown Fire Chief™ arborvitae (Thuja occidentalis L.) on counting accuracy. Images were taken at 6, 12, and 22 m above the ground using unmanned aircraft systems. Plants were spaced to achieve three canopy separation treatments: 5 cm between canopy edges, canopy edges touching, and 5 cm of canopy edge overlap. Plants were placed on two different ground covers: black fabric and gravel. A counting algorithm was trained using Feature Analyst®. Total counting error, false positives, and unidentified plants were reported for images analyzed. In general, total counting error was smaller when plants were fully separated. The effect of ground cover on counting accuracy varied with the counting algorithm. Total counting error for plants placed on gravel (-8) was larger than for those on a black fabric (-2), however, false positive counts were similar for black fabric (6) and gravel (6). Nevertheless, output images of plants placed on gravel did not show a negative effect due to the ground cover but was impacted by differences in image spatial resolution.

32-channel single photon counting module for ultrasensitive detection of DNA sequences

NASA Astrophysics Data System (ADS)

Gudkov, Georgiy; Dhulla, Vinit; Borodin, Anatoly; Gavrilov, Dmitri; Stepukhovich, Andrey; Tsupryk, Andrey; Gorbovitski, Boris; Gorfinkel, Vera

2006-10-01

We continue our work on the design and implementation of multi-channel single photon detection systems for highly sensitive detection of ultra-weak fluorescence signals, for high-performance, multi-lane DNA sequencing instruments. A fiberized, 32-channel single photon detection (SPD) module based on single photon avalanche diode (SPAD), model C30902S-DTC, from Perkin Elmer Optoelectronics (PKI) has been designed and implemented. Unavailability of high performance, large area SPAD arrays and our desire to design high performance photon counting systems drives us to use individual diodes. Slight modifications in our quenching circuit has doubled the linear range of our system from 1MHz to 2MHz, which is the upper limit for these devices and the maximum saturation count rate has increased to 14 MHz. The detector module comprises of a single board computer PC-104 that enables data visualization, recording, processing, and transfer. Very low dark count (300-1000 counts/s), robust, efficient, simple data collection and processing, ease of connectivity to any other application demanding similar requirements and similar performance results to the best commercially available single photon counting module (SPCM from PKI) are some of the features of this system.

Plasma glucose and insulin responses after consumption of breakfasts with different sources of soluble fiber in type 2 diabetes patients: a randomized crossover clinical trial.

PubMed

de Carvalho, Cláudia M; de Paula, Tatiana P; Viana, Luciana V; Machado, Vitória Mt; de Almeida, Jussara C; Azevedo, Mirela J

2017-11-01

Background: The amount and quality of carbohydrates are important determinants of plasma glucose after meals. Regarding fiber content, it is unclear whether the intake of soluble fibers from foods or supplements has an equally beneficial effect on lowering postprandial glucose. Objective: The aim of our study was to compare the acute effect of soluble fiber intake from foods or supplements after a common meal on postprandial plasma glucose and plasma insulin in patients with type 2 diabetes (T2D). Design: A randomized crossover clinical trial was conducted in patients with T2D. Patients consumed isocaloric breakfasts (mean ± SD: 369.8 ± 9.4 kcal) with high amounts of fiber from diet food sources (total fiber: 9.7 g; soluble fiber: 5.4 g), high amounts of soluble fiber from guar gum supplement (total fiber: 9.1 g; soluble fiber: 5.4 g), and normal amounts of fiber (total fiber: 2.4 g; soluble fiber: 0.8 g). Primary outcomes were postprandial plasma glucose and insulin (0-180 min). Data were analyzed by repeated measures ANOVA and post hoc Bonferroni test. Results: A total of 19 patients [aged 65.8 ± 7.3 y; median (IQR), 10 (5-9) y of T2D duration; glycated hemoglobin 7.0% ± 0.8%; body mass index (in kg/m 2 ) 28.2 ± 2.9] completed 57 meal tests. After breakfast, the incremental area under the curve (iAUC) for plasma glucose [mg/dL · min; mean (95% CI)] did not differ between high fiber from diet (HFD) [7861 (6257, 9465)] and high fiber from supplement (HFS) [7847 (5605, 10,090)] ( P = 1.00) and both were lower than usual fiber (UF) [9527 (7549, 11,504)] ( P = 0.014 and P = 0.037, respectively). iAUCs [μIU/mL · min; mean (95% CI)] did not differ ( P = 0.877): HFD [3781 (2513, 5050)], HFS [4006 (2711, 5302), and UF [4315 (3027, 5603)]. Conclusions: Higher fiber intake was associated with lower postprandial glucose at breakfast, and the intake of soluble fiber from food and supplement had a similar effect in patients with T2D. This trial was registered at clinicaltrials.gov as NCT02204384. © 2017 American Society for Nutrition.

Highly efficient entanglement swapping and teleportation at telecom wavelength

PubMed Central

Jin, Rui-Bo; Takeoka, Masahiro; Takagi, Utako; Shimizu, Ryosuke; Sasaki, Masahide

2015-01-01

Entanglement swapping at telecom wavelengths is at the heart of quantum networking in optical fiber infrastructures. Although entanglement swapping has been demonstrated experimentally so far using various types of entangled photon sources both in near-infrared and telecom wavelength regions, the rate of swapping operation has been too low to be applied to practical quantum protocols, due to limited efficiency of entangled photon sources and photon detectors. Here we demonstrate drastic improvement of the efficiency at telecom wavelength by using two ultra-bright entangled photon sources and four highly efficient superconducting nanowire single photon detectors. We have attained a four-fold coincidence count rate of 108 counts per second, which is three orders higher than the previous experiments at telecom wavelengths. A raw (net) visibility in a Hong-Ou-Mandel interference between the two independent entangled sources was 73.3 ± 1.0% (85.1 ± 0.8%). We performed the teleportation and entanglement swapping, and obtained a fidelity of 76.3% in the swapping test. Our results on the coincidence count rates are comparable with the ones ever recorded in teleportation/swapping and multi-photon entanglement generation experiments at around 800 nm wavelengths. Our setup opens the way to practical implementation of device-independent quantum key distribution and its distance extension by the entanglement swapping as well as multi-photon entangled state generation in telecom band infrastructures with both space and fiber links. PMID:25791212

Highly efficient entanglement swapping and teleportation at telecom wavelength.

PubMed

Jin, Rui-Bo; Takeoka, Masahiro; Takagi, Utako; Shimizu, Ryosuke; Sasaki, Masahide

2015-03-20

Entanglement swapping at telecom wavelengths is at the heart of quantum networking in optical fiber infrastructures. Although entanglement swapping has been demonstrated experimentally so far using various types of entangled photon sources both in near-infrared and telecom wavelength regions, the rate of swapping operation has been too low to be applied to practical quantum protocols, due to limited efficiency of entangled photon sources and photon detectors. Here we demonstrate drastic improvement of the efficiency at telecom wavelength by using two ultra-bright entangled photon sources and four highly efficient superconducting nanowire single photon detectors. We have attained a four-fold coincidence count rate of 108 counts per second, which is three orders higher than the previous experiments at telecom wavelengths. A raw (net) visibility in a Hong-Ou-Mandel interference between the two independent entangled sources was 73.3 ± 1.0% (85.1 ± 0.8%). We performed the teleportation and entanglement swapping, and obtained a fidelity of 76.3% in the swapping test. Our results on the coincidence count rates are comparable with the ones ever recorded in teleportation/swapping and multi-photon entanglement generation experiments at around 800 nm wavelengths. Our setup opens the way to practical implementation of device-independent quantum key distribution and its distance extension by the entanglement swapping as well as multi-photon entangled state generation in telecom band infrastructures with both space and fiber links.

Sensing and enumerating rare circulating cells with diffuse light

NASA Astrophysics Data System (ADS)

Zettergren, Eric; Vickers, Dwayne; Niedre, Mark

2011-02-01

Detection and quantification of circulating cells in live animals is a challenging and important problem in many areas of biomedical research. Current methods involve extraction of blood samples and counting of cells ex-vivo. Since only small blood volumes are analyzed at specific time points, monitoring of changes in cell populations over time is difficult and rare cells often escape detection. The goal of this research is to develop a method for enumerating very rare circulating cells in the bloodstream non-invasively. This would have many applications in biomedical research, including monitoring of cancer metastasis and tracking of hematopoietic stem cells. In this work we describe the optical configuration of our instrument which allows fluorescence detection of single cells in diffusive media at the mesoscopic scale. Our instrument design consists of two continuous wave laser diode sources and an 8-channel fiber coupled multi-anode photon counting PMT. Fluorescence detector fibers were arranged circularly around the target in a miniaturized ring configuration. Cell-simulating fluorescent microspheres and fluorescently-labeled cells were passed through a limb mimicking phantom with similar optical properties and background fluorescence as a limb of a mouse. Our data shows that we are able to successfully detect and count these with high quantitative accuracy. Future work includes characterization of our instrument using fluorescently labeled cells in-vivo. If successful, this technique would allow several orders of magnitude in vivo detection sensitivity improvement versus current approaches.

Structural and stereological analysis of elastic fibers in the glans penis of young men.

PubMed

Andrade, F; Cardoso, G P; Bastos, Ana Luiza; Costa, W; Chagas, M; Babinski, M

2012-01-01

The extracellular matrix is an important element in penile function and pathology, although little is known about its components in human glans. This study evaluates the morphological organization and volumetric density of elastic fibers in the glans penis of young men without any evidence of urogenital disease at autopsy or medical history. Penile glans were obtained from five young men who died of causes not related to the urogenital tract, ranging in age from 18 to 30 years (mean 24 years). Samples were fixed in formalin, embedded in paraffin, and histologically processed. Tissue was analyzed by light microscopy using Weigert's resorcin-fuchsin, after previous oxidation with oxone. The point-counting method was used for morphometrical evaluation. Quantities were expressed as volumetric densities (Vv) and were determined on 25 random fields for each individual. Elastic system fibers were easily identified. These fibers had tortuous profile and surrounded sinusoids in the glans penis. An irregular elastic fibers network was identified in the mucosa, while in the corpus spongiosum the elastic fibers were longitudinally distributed. Volumetric density of elastic fibers in the glans penis is 29.4% ± 3.1. These data could provide valuable information in order to draw parallels regarding patients with erectile dysfunction. Further studies regarding extracellular matrix of the penis are necessary to better elucidate the relation between elastic fibers and erectile dysfunction.

Avian leucocyte counting using the hemocytometer

USGS Publications Warehouse

Dein, F.J.; Wilson, A.; Fischer, D.; Langenberg, P.

1994-01-01

Automated methods for counting leucocytes in avian blood are not available because of the presence of nucleated erythrocytes and thrombocytes. Therefore, total white blood cell counts are performed by hand using a hemocytometer. The Natt and Herrick and the Unopette methods are the most common stain and diluent preparations for this procedure. Replicate hemocytometer counts using these two methods were performed on blood from four birds of different species. Cells present in each square of the hemocytometer were counted. Counting cells in the corner, side, or center hemocytometer squares produced statistically equivalent results; counting four squares per chamber provided a result similar to that obtained by counting nine squares; and the Unopette method was more precise for hemocytometer counting than was the Natt and Herrick method. The Unopette method is easier to learn and perform but is an indirect process, utilizing the differential count from a stained smear. The Natt and Herrick method is a direct total count, but cell identification is more difficult.

A case-control study of domestic kitchen microbiology and sporadic Salmonella infection.

PubMed

Parry, S M; Slader, J; Humphrey, T; Holmes, B; Guildea, Z; Palmer, S R

2005-10-01

The microbiology of domestic kitchens in the homes of subjects who had suffered sporadic Salmonella infection (cases) was compared with control domestic kitchens. Case and control dishcloths and refrigerator swabs were examined for the presence of Salmonella spp., total Enterobacteriaceae counts and total aerobic colony counts. Salmonella spp. were isolated from both case and control dishcloths and refrigerators but there were no significant differences between the two groups. Colony counts were similar in case and control dishcloths and refrigerator swabs. There was no relationship between the total counts and presence of Salmonella . There was no evidence that cases of Salmonella infection were more likely to have kitchens which were contaminated with these bacteria or have higher bacterial counts than controls. Total bacterial counts were poor indicators of Salmonella contamination of the domestic kitchen environment. Further factors which could not be identified by a study of this design may increase risk of Salmonella food poisoning. These factors may include individual susceptibility of the patient. Alternatively, sporadic cases of Salmonella food poisoning may arise from food prepared outside the home.

Mechanisms of nascent fiber formation during avian skeletal muscle hypertrophy

NASA Technical Reports Server (NTRS)

McCormick, K. M.; Schultz, E.

1992-01-01

This study examined two putative mechanisms of new fiber formation in postnatal skeletal muscle, namely longitudinal fragmentation of existing fibers and de novo formation. The relative contributions of these two mechanisms to fiber formation in hypertrophying anterior latissimus dorsi (ALD) muscle were assessed by quantitative analysis of their nuclear populations. Muscle hypertrophy was induced by wing-weighting for 1 week. All nuclei formed during the weighting period were labeled by continuous infusion of 5-bromo-2'-deoxyuridine (BrdU), a thymidine analog, and embryonic-like fibers were identified using an antibody to ventricular-like embryonic (V-EMB) myosin. The number of BrdU-labeled and unlabeled nuclei in V-EMB-positive fibers were counted. Wing-weighting resulted in significant muscle enlargement and the appearance of many V-EMB+ fibers. The majority of V-EMB+ fibers were completely independent of mature fibers and had a nuclear density characteristics of developing fibers. Furthermore, nearly 100% of the nuclei in independent V-EMB+ fibers were labeled. These findings strongly suggest that most V-EMB+ fibers were nascent fibers formed de novo during the weighting period by satellite cell activation and fusion. Nascent fibers were found primarily in the space between fascicles where they formed a complex anastomosing network of fibers running at angles to one another. Although wing-weighting induced an increase in the number of branched fibers, there was no evidence that V-EMB+ fibers were formed by longitudinal fragmentation. The location of newly formed fibers in wing-weighted and regenerating ALD muscle was compared to determine whether satellite cells in the ALD muscle were unusual in that, if stimulated to divide, they would form fibers in the inter- and intrafascicular space. In contrast to wing-weighted muscle, nascent fibers were always found closely associated with necrotic fibers. These results suggest that wing-weighting is not simply another model of regeneration, but rather produces a unique environment which induces satellite cell migration and subsequent fiber formation in the interfascicular space. De novo fiber formation is apparently the principal mechanism for the hyperplasia reported to occur in the ALD muscle undergoing hypertrophy induced by wing-weighting.

Oats

MedlinePlus

... saturated fat. For each gram of soluble fiber (beta-glucan) consumed, total cholesterol decreases by about 1.42 ... total cholesterol than foods containing oat bran plus beta-glucan soluble fiber. The FDA recommends that approximately 3 ...

Dietary fiber intake and mortality in the NIH-AARP diet and health study.

PubMed

Park, Yikyung; Subar, Amy F; Hollenbeck, Albert; Schatzkin, Arthur

2011-06-27

Dietary fiber has been hypothesized to lower the risk of coronary heart disease, diabetes, and some cancers. However, little is known of the effect of dietary fiber intake on total death and cause-specific deaths. We examined dietary fiber intake in relation to total mortality and death from specific causes in the NIH (National Institutes of Health)-AARP Diet and Health Study, a prospective cohort study. Diet was assessed using a food-frequency questionnaire at baseline. Cause of death was identified using the National Death Index Plus. Cox proportional hazard models were used to estimate relative risks and 2-sided 95% confidence intervals (CIs). During an average of 9 years of follow-up, we identified 20 126 deaths in men and 11 330 deaths in women. Dietary fiber intake was associated with a significantly lowered risk of total death in both men and women (multivariate relative risk comparing the highest with the lowest quintile, 0.78 [95% CI, 0.73-0.82; P for trend, <.001] in men and 0.78 [95% CI, 0.73-0.85; P for trend, <.001] in women). Dietary fiber intake also lowered the risk of death from cardiovascular, infectious, and respiratory diseases by 24% to 56% in men and by 34% to 59% in women. Inverse association between dietary fiber intake and cancer death was observed in men but not in women. Dietary fiber from grains, but not from other sources, was significantly inversely related to total and cause-specific death in both men and women. Dietary fiber may reduce the risk of death from cardiovascular, infectious, and respiratory diseases. Making fiber-rich food choices more often may provide significant health benefits.

Dietary fiber intake and mortality in the NIH-AARP Diet and Health Study

PubMed Central

Park, Yikyung; Subar, Amy F.; Hollenbeck, Albert; Schatzkin, Arthur

2012-01-01

Background Dietary fiber has been hypothesized to lower risk of coronary heart disease, diabetes, and some cancers. However, little is known of the effect of dietary fiber on total death and cause-specific deaths. Methods We examined dietary fiber intake in relation to total mortality and death from specific causes in the NIH-AARP Diet and Health Study, a prospective cohort study. Diet was assessed using a food frequency questionnaire at baseline. Cause of death was identified using the National Death Index Plus. Cox proportional hazard models were used to estimate relative risks (RRs) and two-sided 95% confidence intervals (CI). Results During an average of 9 years of follow-up, we identified 20,126 deaths in men and 11,330 deaths in women. Dietary fiber intake was associated with significantly lowered risk of total death in both men and women (multivariate RR comparing the highest vs. the lowest quintile =0.78, 95% CI:0.73–0.82, p-trend, <0.001 in men; 0.78. 95% CI:0.73–0.85, p-trend, <0.001 in women). Dietary fiber intake also lowered risk of death from cardiovascular, infectious, and respiratory diseases by 24%–56% in men and 34%–59% in women. Inverse association between dietary fiber intake and cancer death was observed in men, but not in women. Dietary fiber from grains, but not from other sources, was significantly inversely related to total and cause-specific death in both men and women. Conclusions Dietary fiber may reduce the risk of death from cardiovascular, infectious and respiratory diseases. Making fiber-rich food choices more often may provide significant health benefits. PMID:21321288

Validation of an in vitro model for predicting rumen and total-tract fiber digestibility in dairy cows fed corn silages with different in vitro neutral detergent fiber digestibilities at 2 levels of dry matter intake.

PubMed

Lopes, F; Cook, D E; Combs, D K

2015-01-01

An in vivo study was performed to validate an in vitro procedure that predicts rate of fiber digestion and total-tract neutral detergent fiber digestibility (TTNDFD). Two corn silages that differed in fiber digestibility were used in this trial. The corn silage with lower fiber digestibility (LFDCS) had the TTNDFD prediction of 36.0% of total NDF, whereas TTNDFD for the corn silage with higher fiber digestibility (HFDCS) was 44.9% of total neutral detergent fiber (NDF). Two diets (1 with LFDCS and 1 with HFDCS) were formulated and analyzed using the in vitro assay to predict the TTNDFD and rumen potentially digestible NDF (pdNDF) digestion rate. Similar diets were fed to 8 ruminally cannulated, multiparous, high-producing dairy cows in 2 replicated 4×4 Latin squares with 21-d periods. A 2×2 factorial arrangement of treatments was used with main effects of intake (restricted to approximately 90% of ad libitum intake vs. ad libitum) and corn silage of different fiber digestibility. Treatments were restricted and ad libitum LFDCS as well as restricted and ad libitum HFDCS. The input and output values predicted from the in vitro model were compared with in vivo measurements. The pdNDF intake predicted by the in vitro model was similar to pdNDF intake observed in vivo. Also, the pdNDF digestion rate predicted in vitro was similar to what was observed in vivo. The in vitro method predicted TTNDFD of 50.2% for HFDCS and 42.9% for LFDCS as a percentage of total NDF in the diets, whereas the in vivo measurements of TTNDFD averaged 50.3 and 48.6% of total NDF for the HFDCS and LFDCS diets, respectively. The in vitro TTNDFD assay predicted total-tract NDF digestibility of HFDCS diets similar to the digestibility observed in vivo, but for LFDCS diets the assay underestimated the digestibility compared with in vivo. When the in vitro and in vivo measurements were compared without intake effect (ad libitum and restricted) considering only diet effect of silage fiber digestibility (HFDCS and LFDCS), no differences were observed between methods. These values suggest that our in vitro TTNDFD model could be used to predicted rate of fiber digestion and NDF digestibility for dairy cattle. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Multi-core fiber amplifier arrays for intra-satellite links

NASA Astrophysics Data System (ADS)

Kechagias, Marios; Crabb, Jonathan; Stampoulidis, Leontios; Farzana, Jihan; Kehayas, Efstratios; Filipowicz, Marta; Napierala, Marek; Murawski, Michal; Nasilowski, Tomasz; Barbero, Juan

2017-09-01

In this paper we present erbium doped fibre (EDF) aimed at signal amplification within satellite photonic payload systems operating in C telecommunication band. In such volume-hungry applications, the use of advanced optical transmission techniques such as space division multiplexing (SDM) can be advantageous to reduce the component and cable count.

Changes in hemp secondary fiber production related to technical fiber variability revealed by light microscopy and attenuated total reflectance Fourier transform infrared spectroscopy

PubMed Central

Fernandez-Tendero, Eva; Day, Arnaud; Legros, Sandrine; Habrant, Anouck; Hawkins, Simon

2017-01-01

Interest in hemp (Cannabis sativa L.) is increasing due to the development of a new range of industrial applications based on bast fibers. However the variability of bast fiber yield and quality represents an important barrier to further exploitation. Primary and secondary fiber content was examined in two commercial hemp varieties (Fedora 17, Santhica 27) grown under contrasted sowing density and irrigation conditions. Both growing conditions and hemp varieties impact stem tissue architecture with a large effect on the proportion of secondary fibers but not primary fibers. Attenuated total reflectance infrared spectroscopy allowed the discrimination of manually-isolated native primary fibers and secondary fibers but did not reveal any clustering according to growing conditions and variety. Infrared data were confirmed by wet chemistry analyses that revealed slight but significant differences between primary and secondary fiber cell wall composition. Infrared spectroscopy of technical fibers obtained after mechanical defibering revealed differences with native primary, but not secondary fibers and also discriminated samples obtained from plants grown under different conditions. Altogether the results suggested that the observed variability of hemp technical fibers could be partially explained by i) differences in secondary fiber production and ii) differential behavior during mechanical defibering resulting in unequal separation of primary and secondary fibers. PMID:28640922

Changes in hemp secondary fiber production related to technical fiber variability revealed by light microscopy and attenuated total reflectance Fourier transform infrared spectroscopy.

PubMed

Fernandez-Tendero, Eva; Day, Arnaud; Legros, Sandrine; Habrant, Anouck; Hawkins, Simon; Chabbert, Brigitte

2017-01-01

Interest in hemp (Cannabis sativa L.) is increasing due to the development of a new range of industrial applications based on bast fibers. However the variability of bast fiber yield and quality represents an important barrier to further exploitation. Primary and secondary fiber content was examined in two commercial hemp varieties (Fedora 17, Santhica 27) grown under contrasted sowing density and irrigation conditions. Both growing conditions and hemp varieties impact stem tissue architecture with a large effect on the proportion of secondary fibers but not primary fibers. Attenuated total reflectance infrared spectroscopy allowed the discrimination of manually-isolated native primary fibers and secondary fibers but did not reveal any clustering according to growing conditions and variety. Infrared data were confirmed by wet chemistry analyses that revealed slight but significant differences between primary and secondary fiber cell wall composition. Infrared spectroscopy of technical fibers obtained after mechanical defibering revealed differences with native primary, but not secondary fibers and also discriminated samples obtained from plants grown under different conditions. Altogether the results suggested that the observed variability of hemp technical fibers could be partially explained by i) differences in secondary fiber production and ii) differential behavior during mechanical defibering resulting in unequal separation of primary and secondary fibers.

Enhanced ν-optical time domain reflectometry using gigahertz sinusoidally gated InGaAs/InP single-photon avalanche detector

NASA Astrophysics Data System (ADS)

Zhang, Xuping; Shi, Yuanlei; Shan, Yuanyuan; Sun, Zhenhong; Qiao, Weiyan; Zhang, Yixin

2016-09-01

Optical time domain reflectometry (OTDR) is one of the most successful diagnostic tools for nondestructive attenuation measurement of a fiber link. To achieve better sensitivity, spatial resolution, and avoid dead-zone in conversional OTDR, a single-photon detector has been introduced to form the photon-counting OTDR (ν-OTDR). We have proposed a ν-OTDR system using a gigahertz sinusoidally gated InGaAs/InP single-photon avalanche detector (SPAD). Benefiting from the superior performance of a sinusoidal gated SPAD on dark count probability, gating frequency, and gate duration, our ν-OTDR system has achieved a dynamic range (DR) of 33.4 dB with 1 μs probe pulse width after an equivalent measurement time of 51 s. This obtainable DR corresponds to a sensing length over 150 km. Our system has also obtained a spatial resolution of 5 cm at the end of a 5-km standard single-mode fiber. By employing a sinusoidal gating technique, we have improved the ν-OTDR spatial resolution and significantly reduced the measurement time.

High-speed single-photon signaling for daytime QKD

NASA Astrophysics Data System (ADS)

Bienfang, Joshua; Restelli, Alessandro; Clark, Charles

2011-03-01

The distribution of quantum-generated cryptographic key at high throughputs can be critically limited by the performance of the systems' single-photon detectors. While noise and afterpulsing are considerations for all single-photon QKD systems, high-transmission rate systems also have critical detector timing-resolution and recovery time requirements. We present experimental results exploiting the high timing resolution and count-rate stability of modified single-photon avalanche diodes (SPADs) in our GHz QKD system operating over a 1.5 km free-space link that demonstrate the ability to apply extremely short temporal gates, enabling daytime free-space QKD with a 4% QBER. We also discuss recent advances in gating techniques for InGaAs SPADs that are suitable for high-speed fiber-based QKD. We present afterpulse-probability measurements that demonstrate the ability to support single-photon count rates above 100 MHz with low afterpulse probability. These results will benefit the design and characterization of free-space and fiber QKD systems. A. Restelli, J.C. Bienfang A. Mink, and C.W. Clark, IEEE J. Sel. Topics in Quant. Electron 16, 1084 (2010).

Health properties of oca (Oxalis tuberosa) and yacon (Smallanthus sonchifolius).

PubMed

Jimenez, María Eugenia; Rossi, Analia; Sammán, Norma

2015-10-01

Andean roots and tubers are underexploited crops; many contain compounds beneficial to health, so a greater knowledge of their properties is important for encouraging their consumption. The aim of this work was to study the content of bioactive compounds of yacon and oca and their effect on intestinal health using as a model rats of the Wistar strain. Two varieties of ocas (Overa and Rosada) and yacon, which contain significant amounts of fructooligosaccharides and phenolic compounds, were chosen. Rats of the Wistar strain were fed for two months with diets containing these foods in amounts sufficient to provide 8% of fiber. A significant decrease in pH values and an increment in lactobacilli and bifidobacteria counts in the cecum of rats fed with inulin, oca Rosada and Overa were observed; there was no significant decrease in enterobacteriaceae and enterococci counts. The cecum antioxidant activity was incremented in rats fed with the experimental foods with respect to the control diets. The components of dietary fiber and phenolic compound contents in yacon and oca produce effects that contribute to the intestinal health of the experimental animals.

Direct Detection Electron Energy-Loss Spectroscopy: A Method to Push the Limits of Resolution and Sensitivity.

PubMed

Hart, James L; Lang, Andrew C; Leff, Asher C; Longo, Paolo; Trevor, Colin; Twesten, Ray D; Taheri, Mitra L

2017-08-15

In many cases, electron counting with direct detection sensors offers improved resolution, lower noise, and higher pixel density compared to conventional, indirect detection sensors for electron microscopy applications. Direct detection technology has previously been utilized, with great success, for imaging and diffraction, but potential advantages for spectroscopy remain unexplored. Here we compare the performance of a direct detection sensor operated in counting mode and an indirect detection sensor (scintillator/fiber-optic/CCD) for electron energy-loss spectroscopy. Clear improvements in measured detective quantum efficiency and combined energy resolution/energy field-of-view are offered by counting mode direct detection, showing promise for efficient spectrum imaging, low-dose mapping of beam-sensitive specimens, trace element analysis, and time-resolved spectroscopy. Despite the limited counting rate imposed by the readout electronics, we show that both core-loss and low-loss spectral acquisition are practical. These developments will benefit biologists, chemists, physicists, and materials scientists alike.

Detection of Salmonella sp., Vibrio sp. and total plate count bacteria on blood cockle (Anadara granosa)

NASA Astrophysics Data System (ADS)

Ekawati, ER; Yusmiati, S. N. H.

2018-01-01

Blood cockle (Anadara granosa) has high level of zinc and protein, which is beneficial for therapeutic function for malnourished particularly stunting case in children. Zinc in animal foods is more absorbable than that from vegetable food. Blood cockle (Anadara granosa) is rich in nutrient and an excellent environment for the growth of microorganisms. This research aimed to identify the contamination of Salmonella sp., Vibrio sp. and total plate count bacteria on blood cockle (Anadara granosa). This was observation research with laboratory analysis. Salmonella sp. and Vibrio sp. were detected from blood cockle. Total plate count was determine of the total amount of the bacteria. Results detected from 20 samples of blood cockle showed that all samples were negative of Salmonella sp. and 1 sample positive Vibrio sp. The result of total plate count bacteria was < 5 x 105 colony/g sample.

High Amount of Dietary Fiber Not Harmful But Favorable for Crohn Disease

PubMed Central

Chiba, Mitsuro; Tsuji, Tsuyotoshi; Nakane, Kunio; Komatsu, Masafumi

2015-01-01

Current chronic diseases are a reflection of the westernized diet that features a decreased consumption of dietary fiber. Indigestible dietary fiber is metabolized by gut bacteria, including Faecalibacterium prausnitzii, to butyrate, which has a critical role in colonic homeostasis owing to a variety of functions. Dietary fiber intake has been significantly inversely associated with the risk of chronic diseases. Crohn disease (CD) is not an exception. However, even authors who reported the inverse association between dietary fiber and a risk of CD made no recommendation of dietary fiber intake to CD patients. Some correspondence was against advocating high fiber intake in CD. We initiated a semivegetarian diet (SVD), namely a lacto-ovo-vegetarian diet, for patients with inflammatory bowel disease. Our SVD contains 32.4 g of dietary fiber in 2000 kcal. There was no untoward effect of the SVD. The remission rate with combined infliximab and SVD for newly diagnosed CD patients was 100%. Maintenance of remission on SVD without scheduled maintenance therapy with biologic drugs was 92% at 2 years. These excellent short- and long-term results can be explained partly by SVD. The fecal bacterial count of F prausnitzii in patients with CD is significantly lower than in healthy controls. Diet reviews recommend plant-based diets to treat and to prevent a variety of chronic diseases. SVD belongs to plant-based diets that inevitably contain considerable amounts of dietary fiber. Our clinical experience and available data provide a rationale to recommend a high fiber intake to treat CD. PMID:25663207

Nonlinear effects of a modal domain optical fiber sensor in a vibration suppression control loop for a flexible structure

NASA Technical Reports Server (NTRS)

Lindner, D. K.; Zvonar, G. A.; Baumann, W. T.; Delos, P. L.

1993-01-01

Recently, a modal domain optical fiber sensor has been demonstrated as a sensor in a control system for vibration suppression of a flexible cantilevered beam. This sensor responds to strain through a mechanical attachment to the structure. Because this sensor is of the interferometric type, the output of the sensor has a sinusoidal nonlinearity. For small levels of strain, the sensor can be operated in its linear region. For large levels of strain, the detection electronics can be configured to count fringes. In both of these configurations, the sensor nonlinearity imposes some restrictions on the performance of the control system. In this paper we investigate the effects of these sensor nonlinearities on the control system, and identify the region of linear operation in terms of the optical fiber sensor parameters.

Impact resistance of fiber composites

NASA Technical Reports Server (NTRS)

Chamis, C. C.; Sinclair, J. H.

1982-01-01

Stress-strain curves are obtained for a variety of glass fiber and carbon fiber reinforced plastics in dynamic tension, over the stress-strain range of 0.00087-2070/sec. The test method is of the one-bar block-to-bar type, using a rotating disk or a pendulum as the loading apparatus and yielding accurate stress-strain curves up to the breaking strain. In the case of glass fiber reinforced plastic, the tensile strength, strain to peak impact stress, total strain and total absorbed energy all increase significantly as the strain rate increases. By contrast, carbon fiber reinforced plastics show lower rates of increase with strain rate. It is recommended that hybrid composites incorporating the high strength and rigidity of carbon fiber reinforced plastic with the high impact absorption of glass fiber reinforced plastics be developed for use in structures subjected to impact loading.

Association of peripheral differential leukocyte counts with dyslipidemia risk in Chinese patients with hypertension: insight from the China Stroke Primary Prevention Trial.

PubMed

Liu, Yanhong; Kong, Xiangyi; Wang, Wen; Fan, Fangfang; Zhang, Yan; Zhao, Min; Wang, Yi; Wang, Yupeng; Wang, Yu; Qin, Xianhui; Tang, Genfu; Wang, Binyan; Xu, Xiping; Hou, Fan Fan; Gao, Wei; Sun, Ningling; Li, Jianping; Venners, Scott A; Jiang, Shanqun; Huo, Yong

2017-01-01

The aim of the present study was to examine the association between peripheral differential leukocyte counts and dyslipidemia in a Chinese hypertensive population. A total of 10,866 patients with hypertension were enrolled for a comprehensive assessment of cardiovascular risk factors using data from the China Stroke Primary Prevention Trial. Plasma lipid levels and total leukocyte, neutrophil, and lymphocyte counts were determined according to standard methods. Peripheral differential leukocyte counts were consistently and positively associated with serum total cholesterol (TC), LDL cholesterol (LDL-C), and TG levels (all P < 0.001 for trend), while inversely associated with HDL cholesterol levels (P < 0.05 for trend). In subsequent analyses where serum lipids were dichotomized (dyslipidemia/normolipidemia), we found that patients in the highest quartile of total leukocyte count (≥7.6 × 10 9 cells/l) had 1.64 times the risk of high TG [95% confidence interval (CI): 1.46, 1.85], 1.34 times the risk of high TC (95% CI: 1.20, 1.50), and 1.24 times the risk of high LDL-C (95% CI: 1.12, 1.39) compared with their counterparts in the lowest quartile of total leukocyte count. Similar patterns were also observed with neutrophils and lymphocytes. In summary, these findings indicate that elevated differential leukocyte counts are directly associated with serum lipid levels and increased odds of dyslipidemia. Copyright © 2017 by the American Society for Biochemistry and Molecular Biology, Inc.

A dynamic system with digital lock-in-photon-counting for pharmacokinetic diffuse fluorescence tomography

NASA Astrophysics Data System (ADS)

Yin, Guoyan; Zhang, Limin; Zhang, Yanqi; Liu, Han; Du, Wenwen; Ma, Wenjuan; Zhao, Huijuan; Gao, Feng

2018-02-01

Pharmacokinetic diffuse fluorescence tomography (DFT) can describe the metabolic processes of fluorescent agents in biomedical tissue and provide helpful information for tumor differentiation. In this paper, a dynamic DFT system was developed by employing digital lock-in-photon-counting with square wave modulation, which predominates in ultra-high sensitivity and measurement parallelism. In this system, 16 frequency-encoded laser diodes (LDs) driven by self-designed light source system were distributed evenly in the imaging plane and irradiated simultaneously. Meanwhile, 16 detection fibers collected emission light in parallel by the digital lock-in-photon-counting module. The fundamental performances of the proposed system were assessed with phantom experiments in terms of stability, linearity, anti-crosstalk as well as images reconstruction. The results validated the availability of the proposed dynamic DFT system.

16 CFR 300.8 - Use of fiber trademark and generic names.

Code of Federal Regulations, 2011 CFR

2011-01-01

... is not the case. (g) The term fur fiber may be used to describe the hair or fur fiber or mixtures..., llama and vicuna. If the name, symbol, or depiction of any animal producing the hair or fur fiber is..., the percentage by weight of such hair or fur fiber in the total fiber weight of the wool product shall...

16 CFR 300.8 - Use of fiber trademark and generic names.

Code of Federal Regulations, 2010 CFR

2010-01-01

... is not the case. (g) The term fur fiber may be used to describe the hair or fur fiber or mixtures..., llama and vicuna. If the name, symbol, or depiction of any animal producing the hair or fur fiber is..., the percentage by weight of such hair or fur fiber in the total fiber weight of the wool product shall...

16 CFR 300.8 - Use of fiber trademark and generic names.

Code of Federal Regulations, 2012 CFR

2012-01-01

... is not the case. (g) The term fur fiber may be used to describe the hair or fur fiber or mixtures..., llama and vicuna. If the name, symbol, or depiction of any animal producing the hair or fur fiber is..., the percentage by weight of such hair or fur fiber in the total fiber weight of the wool product shall...

16 CFR 300.8 - Use of fiber trademark and generic names.

Code of Federal Regulations, 2014 CFR

2014-01-01

... is not the case. (g) The term fur fiber may be used to describe the hair or fur fiber or mixtures..., llama and vicuna. If the name, symbol, or depiction of any animal producing the hair or fur fiber is..., the percentage by weight of such hair or fur fiber in the total fiber weight of the wool product shall...

16 CFR 300.8 - Use of fiber trademark and generic names.

Code of Federal Regulations, 2013 CFR

2013-01-01

... is not the case. (g) The term fur fiber may be used to describe the hair or fur fiber or mixtures..., llama and vicuna. If the name, symbol, or depiction of any animal producing the hair or fur fiber is..., the percentage by weight of such hair or fur fiber in the total fiber weight of the wool product shall...

SU-E-I-88: The Effect of System Dead Time On Real-Time Plastic and GOS Based Fiber-Optic Dosimetry Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoerner, M; Hintenlang, D

Purpose: A methodology is presented to correct for measurement inaccuracies at high detector count rates using a plastic and GOS scintillation fibers coupled to a photomultiplier tube with digital readout. This system allows temporal acquisition and manipulation of measured data. Methods: The detection system used was a plastic scintillator and a separate gadolinium scintillator, both (0.5 diameter) coupled to an optical fiber with a Hamamatsu photon counter with a built-in microcontroller and digital interface. Count rate performance of the system was evaluated using the nonparalzable detector model. Detector response was investigated across multiple radiation sources including: orthovoltage x-ray system, colbat-60more » gamma rays, proton therapy beam, and a diagnostic radiography x-ray tube. The dead time parameter was calculated by measuring the count rate of the system at different exposure rates using a reference detector. Results: The system dead time was evaluated for the following sources of radiation used clinically: diagnostic energy x-rays, cobalt-60 gamma rays, orthovoltage xrays, particle proton accelerator, and megavoltage x-rays. It was found that dead time increased significantly when exposing the detector to sources capable of generating Cerenkov radiation, all of the sources sans the diagnostic x-rays, with increasing prominence at higher photon energies. Percent depth dose curves generated by a dedicated ionization chamber and compared to the detection system demonstrated that correcting for dead time improves accuracy. On most sources, nonparalzable model fit provided an improved system response. Conclusion: Overall, the system dead time was variable across the investigated radiation particles and energies. It was demonstrated that the system response accuracy was greatly improved by correcting for dead time effects. Cerenkov radiation plays a significant role in the increase in the system dead time through transient absorption effects attributed to electron hole-pair creations within the optical waveguide.« less

CRADA No. BNL-C-97-10 between BNL and Cotton, Inc. Final abstract and final report [Final Report of Research carried out under DOE CRADA No. BNL-C-97-10 - "Prediction of Yield in Cotton"

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

The objectives of this work were to determine if the numbér of fiber cell initials varied genetically and to compare the number of initials with that of mature fibers obtained at harvest time. The method used to count the number of fiber cell initials is direct, simple, quick and done while the plant is growing. In contrast, the currently used commercial process is indirect and needs large amount mature fibers gathered at harvest time. However, all current work on cotton yield is based on fiber numbers obtained by the indirect commercial process. Consequently, it was necessary to compare results obtainedmore » from the two methods using the same plants as the source of material. The results show that the number of fiber initials per ovule differed significantly (P>0.05) for seven cultivars in 1995 and 1996. AIso, a 1997 study shows the number of fiber initials varied by 15% over boll positions and environments, with rankings among cultivars generally consistent across boll positions and sampling times. Finally, although there were differences among cultivars for initial fiber cell number, all cultivars had nearly the same number of mature lint fibers per seed. This last finding is significant. It indicates that the rate of fiber cell initiation varies among cultivars; the lower the rate, the greater the difference between the number of initials and the number of mature fiber cells. If the rate of fiber initiation is relatively high, the number of initials and mature fibers differs by about 11%; if it is low, the difference is as high as 31%. Cotton breeders may be able to use genetic differences for the number of fiber initials and/or the rate of fiber cell initiation in crop improvement programs.« less

Mineralogic correlates of fibrosis in chrysotile miners and millers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Churg, A.; Wright, J.L.; DePaoli, L.

1989-04-01

To determine which mineral parameters relate to the degree of interstitial fibrosis (asbestosis) in the lungs of chrysotile miners and millers, we graded fibrosis histologically and correlated fibrosis grades with fiber concentration and mean size, surface area, and mass, and with total sample fiber length, surface area, and mass in 21 cases. A positive correlation of fibrosis grade with tremolite concentration and a lesser correlation with chrysotile concentration was found for whole lungs, specific sites within lungs, and, for tremolite, single microscopic fields. No correlations were found for measures of chrysotile fiber size, surface area, or mass, but tremolite meanmore » fiber length, aspect ratio, and surface area were, surprisingly, negatively correlated with fibrosis grade. Measures based on total rather than on mean case or site parameters failed to show correlations with fibrosis. We conclude that: (1) degree of pulmonary fibrosis reflects fiber concentration at both a bulk and a microscopic level; (2) mean fiber length and parameters related to mean fiber length also correlate with fibrosis grade, but, contrary to predictions from animal studies, this correlation is negative, suggesting that short fibers may be more important in the genesis of pulmonary fibrosis than is commonly believed; (3) there is no evidence that parameters such as total fiber length, surface area, or mass provide predictors of degree of fibrosis.« less

Glycemic index, glycemic load, dietary carbohydrate, and dietary fiber intake and risk of liver and biliary tract cancers in Western Europeans.

PubMed

Fedirko, V; Lukanova, A; Bamia, C; Trichopolou, A; Trepo, E; Nöthlings, U; Schlesinger, S; Aleksandrova, K; Boffetta, P; Tjønneland, A; Johnsen, N F; Overvad, K; Fagherazzi, G; Racine, A; Boutron-Ruault, M C; Grote, V; Kaaks, R; Boeing, H; Naska, A; Adarakis, G; Valanou, E; Palli, D; Sieri, S; Tumino, R; Vineis, P; Panico, S; Bueno-de-Mesquita, H B; Siersema, P D; Peeters, P H; Weiderpass, E; Skeie, G; Engeset, D; Quirós, J R; Zamora-Ros, R; Sánchez, M J; Amiano, P; Huerta, J M; Barricarte, A; Johansen, D; Lindkvist, B; Sund, M; Werner, M; Crowe, F; Khaw, K T; Ferrari, P; Romieu, I; Chuang, S C; Riboli, E; Jenab, M

2013-02-01

The type and quantity of dietary carbohydrate as quantified by glycemic index (GI) and glycemic load (GL), and dietary fiber may influence the risk of liver and biliary tract cancers, but convincing evidence is lacking. The association between dietary GI/GL and carbohydrate intake with hepatocellular carcinoma (HCC; N = 191), intrahepatic bile duct (IBD; N = 66), and biliary tract (N = 236) cancer risk was investigated in 477 206 participants of the European Prospective Investigation into Cancer and Nutrition cohort. Dietary intake was assessed by country-specific, validated dietary questionnaires. Hazard ratios and 95% confidence intervals were estimated from proportional hazard models. HBV/HCV status was measured in a nested case-control subset. Higher dietary GI, GL, or increased intake of total carbohydrate was not associated with liver or biliary tract cancer risk. For HCC, divergent risk estimates were observed for total sugar = 1.43 (1.17-1.74) per 50 g/day, total starch = 0.70 (0.55-0.90) per 50 g/day, and total dietary fiber = 0.70 (0.52-0.93) per 10 g/day. The findings for dietary fiber were confirmed among HBV/HCV-free participants [0.48 (0.23-1.01)]. Similar associations were observed for IBD [dietary fiber = 0.59 (0.37-0.99) per 10 g/day], but not biliary tract cancer. Findings suggest that higher consumption of dietary fiber and lower consumption of total sugars are associated with lower HCC risk. In addition, high dietary fiber intake could be associated with lower IBD cancer risk.

Real-time dosimetry in radiotherapy using tailored optical fibers

NASA Astrophysics Data System (ADS)

Rahman, A. K. M. Mizanur; Zubair, H. T.; Begum, Mahfuza; Abdul-Rashid, H. A.; Yusoff, Z.; Omar, Nasr Y. M.; Ung, N. M.; Mat-Sharif, K. A.; Bradley, D. A.

2016-05-01

Real-time dosimetry plays an important role for accurate patient-dose measurement during radiotherapy. A tiny piece of laboratory fabricated Ge-doped optical fiber has been investigated as a radioluminescence (RL) sensor for real-time dosimetry over the dose range from 1 Gy to 8 Gy under 6 MV photon beam by LINAC. Fiber-coupled software-based RL prototype system was used to assess essential dosimetric characteristics including dose response linearity, dose rate dependency, sensitivity, repeatability and output dependence on field sizes. The consistency level of RL photon counts versus dose rate was also compared with that of standard Al2O3:C chips. Sensitivity of Ge-doped fiber were found to be sufficiently sensitive for practical use and also provided linear dose responses for various dose rates from 100 cGy/min to 600 cGy/min using both 6 MV photon and 6 MeV electron beams. SEM-EDX analysis was performed to identify Ge-dopant concentration level within the optical fiber RL material. Accumulated doses were also estimated using simple integral technique and the error was found to be around less than 1% under dissimilar dose rates or repeat measurements. The evaluation of the Ge-doped optical fiber based RL dosimeter system indicates its potential in medical dosimetry.

Association of peripheral total and differential leukocyte counts with obesity-related complications in young adults.

PubMed

Yoshimura, Aya; Ohnishi, Shunsuke; Orito, Chieko; Kawahara, Yukako; Takasaki, Hiroyo; Takeda, Hiroshi; Sakamoto, Naoya; Hashino, Satoshi

2015-01-01

Obesity has been demonstrated to be associated with elevated leukocytes in adults and children. This study assessed the associations between peripheral total and differential leukocyte counts and obesity-related complications in young adults. 12 obese (median age 21.5 (range 19-28) years, median BMI 35.7 (range 32.0-44.9) kg/m(2)) and 11 normal (median age 23 (range 18-27) years, median BMI 19.5 (range 18.1-21.7) kg/m(2)) adults were enrolled. Complete blood count and serum levels of liver enzymes, fasting blood glucose, insulin and lipids were measured, and the homeostasis model assessment of insulin resistance was calculated. Fat mass was calculated using a bioimpedance analysis device, and ultrasonography was performed to measure fat thickness and to detect fatty change of the liver. Total leukocyte and monocyte counts were significantly increased in obese young adults. Total leukocyte count was associated with liver enzyme levels, insulin resistance as well as visceral and subcutaneous fat thickness. Neutrophil count was associated with insulin resistance. Lymphocyte count was associated with serum liver enzymes, insulin resistance, and dyslipidemia. Monocyte count was associated with serum liver enzyme, insulin resistance, visceral and subcutaneous fat thickness, body fat mass, and percentage body fat. The results of this study suggest that chronic low-grade systemic inflammation is associated with obesity-related complications such as nonalcoholic fatty liver disease, insulin resistance, and dyslipidemia in young adults. © 2015 S. Karger GmbH, Freiburg.

Predictive factors for long-term engraftment of autologous blood stem cells.

PubMed

Duggan, P R; Guo, D; Luider, J; Auer, I; Klassen, J; Chaudhry, A; Morris, D; Glück, S; Brown, C B; Russell, J A; Stewart, D A

2000-12-01

Data from 170 consecutive patients aged 19-66 years (median age 46 years) who underwent unmanipulated autologous blood stem cell transplant (ASCT) were analyzed to determine if total CD34+ cells/kg infused, CD34+ subsets (CD34+41+, CD34+90+, CD34+33-, CD34+38-, CD34+38-DR-), peripheral blood CD34+ cell (PBCD34+) count on first apheresis day, or various clinical factors were associated with low blood counts 6 months post ASCT. Thirty-four patients were excluded from analysis either because of death (n = 17) or re-induction chemotherapy prior to 6 months post ASCT (n = 13), or because of lack of follow-up data (n = 4). Of the remaining 136 patients, 46% had low WBC ( < 4 x 10(9)/l), 41% low platelets (<150 x 10(9)/l), and 34% low hemoglobin ( < 120 g/l) at a median of 6 months following ASCT. By Spearman's rank correlation, both the total CD34+ cell dose/kg and the PBCD34+ count correlated with 6 month blood counts better than any subset of CD34+ cells or any clinical factor. The PBCD34+ count was overall a stronger predictor of 6 month blood counts than was the total CD34+ cells/kg infused. Both factors retained their significance in multivariate analysis, controlling for clinical factors. In conclusion, subsets of CD34+ cells and clinical factors are inferior to the total CD34+ cell dose/kg and PBCD34+ count in predicting 6 month blood counts following ASCT.

Obesity History and Daily Patterns of Physical Activity at Age 60-64 Years: Findings From the MRC National Survey of Health and Development.

PubMed

Cooper, Rachel; Huang, Lei; Hardy, Rebecca; Crainiceanu, Adina; Harris, Tamara; Schrack, Jennifer A; Crainiceanu, Ciprian; Kuh, Diana

2017-10-01

The aim of this study was to investigate associations of current body mass index (BMI) and obesity history with daily patterns of physical activity. At age 60-64, participants from a British birth cohort study wore accelerometers for 5 days. Accelerometry counts were log-transformed and mean log-counts were used to derive a summary variable indicating total daily log-activity counts. Among those with complete data (n = 1,388) the associations of current BMI and age of first obesity were examined with: (a) total daily log-activity counts and (b) total log-activity counts in four segments of the day. Higher current BMI and younger age at obesity were strongly associated with lower levels of total daily activity at age 60-64 even after adjustment for sex, socioeconomic factors, and health status. The fully-adjusted mean difference in total daily log-activity counts was -581.7 (95% confidence interval: -757.2, -406.3) when comparing BMI ≥35 kg/m2 with <25 kg/m2, representing an 18.4% difference. Participants who had been obese since early adulthood had the lowest levels of activity (mean difference in total daily log-activity counts was -413.1 (-638.1, -188.2) when comparing those who were obese by age 26 or 36 with those who were never obese, representing a 13.1% difference). Obese older adults may require targeted interventions and additional support to improve their daily activity levels. As younger generations with greater lifetime exposure to obesity reach old age the proportion of adults achieving sufficient levels of activity to realize its associated health benefits is likely to decline. © The Author 2017. Published by Oxford University Press on behalf of The Gerontological Society of America.

Obesity History and Daily Patterns of Physical Activity at Age 60–64 Years: Findings From the MRC National Survey of Health and Development

PubMed Central

Cooper, Rachel; Huang, Lei; Hardy, Rebecca; Crainiceanu, Adina; Harris, Tamara; Schrack, Jennifer A; Crainiceanu, Ciprian; Kuh, Diana

2017-01-01

Abstract Background The aim of this study was to investigate associations of current body mass index (BMI) and obesity history with daily patterns of physical activity. Methods At age 60–64, participants from a British birth cohort study wore accelerometers for 5 days. Accelerometry counts were log-transformed and mean log-counts were used to derive a summary variable indicating total daily log-activity counts. Among those with complete data (n = 1,388) the associations of current BMI and age of first obesity were examined with: (a) total daily log-activity counts and (b) total log-activity counts in four segments of the day. Results Higher current BMI and younger age at obesity were strongly associated with lower levels of total daily activity at age 60–64 even after adjustment for sex, socioeconomic factors, and health status. The fully-adjusted mean difference in total daily log-activity counts was −581.7 (95% confidence interval: −757.2, −406.3) when comparing BMI ≥35 kg/m2 with <25 kg/m2, representing an 18.4% difference. Participants who had been obese since early adulthood had the lowest levels of activity (mean difference in total daily log-activity counts was −413.1 (−638.1, −188.2) when comparing those who were obese by age 26 or 36 with those who were never obese, representing a 13.1% difference). Conclusions Obese older adults may require targeted interventions and additional support to improve their daily activity levels. As younger generations with greater lifetime exposure to obesity reach old age the proportion of adults achieving sufficient levels of activity to realize its associated health benefits is likely to decline. PMID:28329086

Adaptation of the AOAC 2011.25 integrated total dietary fiber assay to determine the dietary fiber and oligosaccharide content of dry edible beans.

PubMed

Kleintop, Adrienne E; Echeverria, Dimas; Brick, Leslie A; Thompson, Henry J; Brick, Mark A

2013-10-09

Dietary fiber (DF) has important health benefits in the human diet. Developing dry edible bean (Phaseolus vulgaris L.) cultivars with improved DF and reduced nondigestible oligosaccharide content is an important goal for dry bean breeders to increase consumer acceptance. To determine if genetic variation exists among dry bean cultivars for DF, two populations of diverse dry bean cultivars/lines that represent two centers of dry bean domestication were evaluated for dietary fiber using the Integrated Total Dietary Fiber Assay (AOAC 2011.25). This assay was adapted to measure water insoluble dietary fiber, water soluble dietary fiber, oligosaccharides raffinose and stachyose, and the calculated total dietary fiber (TDF) content of cooked dry bean seed. The AOAC 2011.25 protocol was modified by using a quick, simple, and sensitive high-performance liquid chromatography method paired with an electrochemical detection method to separate and quantify specific oligosaccharides, and using duplicate samples as replicates to generate statistical information. The TDF of dry bean entries ranged from 20.0 to 27.0% in population I and from 20.6 to 25.7% in population II. Total oligosaccharides ranged from 2.56 to 4.65% in population I and from 2.36 to 3.84% in population II. The results suggest that significant genetic variation exists among dry bean cultivars/lines to allow for genetic selection for improved DF content in dry beans and that the modifications to the AOAC 2011.25 method were suitable for estimating DF in cooked dry edible beans.

Development of the oxytalan fiber system in the periodontal space of rat incisors.

PubMed

Inoue, Kouji; Hara, Yaiko; Kuroda, Noriyuki; Sato, Tetsuji

2013-10-01

The present study clarifies developmental organization of the oxytalan fiber system in the periodontal space of both the enamel (labial) and cementum (lingual) sides of rat incisors. The number of oxytalan fibers per unit area (μm(2)) was counted in rat incisors at stages of embryonic day 20 (E20) to postnatal day 35 (P35). Oxytalan fibers in the periodontal space of the enamel side were apt to decrease in number during the postnatal period, whereas their number remained almost unchanged on the cementum side during the developmental period. When the incisor emerged through the gum at P11, thinner oxytalan fibers distributed in the apical growing periodontium of the cementum side seemed to be fused with one another to become thicker fibers as has been reported for rat molars (Inoue et al., 2012). Thus, the oxytalan fiber system in the periodontal space represented significant differences in its distributional density between the enamel and cementum sides after E23. At the stage of P35, oxytalan fibers presented significantly denser distribution in all territories of the periodontal ligament of the cementum side versus the enamel side. The present findings claim that the oxytalan fiber system might bind the tooth to the periodontal ligament and provide equilibrium of vascular system and control of blood flow in the periodontal ligament of the cementum side, while it might exclusively regulate the high level of physiologically adapted vasculature in the periodontal space of the enamel side. Copyright © 2013 Elsevier GmbH. All rights reserved.

The antimicrobial effect of benzalkonium chloride on some pathogenic microbes observed on fibers of acrylic carpet.

PubMed

Khajavi, Ramin; Sattari, Morteza; Ashjaran, Ali

2007-02-15

In the presented research, the main aim is to investigate the antibacterial effectiveness of BAC solutions on acrylic fibers used in machinery carpet. An acrylic pile carpet laid in a public place for 30 days and the existence of some microbes were investigated on it. The antimicrobial effect of different BAC solutions for identified microbes was studied in vitro. The acrylic fibers were treated with the same different solutions of BAC as before and the antibacterial effectiveness was assessed by the zone of inhibition method in different times. Two pieces of carpet untreated and treated with BAC solution sewed together and laid for one week in the public place and the amounts of bacterial growth determined by colony count method and the results compared. Finally some mechanical properties of treated acrylic fibers measured after 30 days and compared with untreated one. The results showed the presence of some pathogenic microbes on the laid carpet such as Escherichia coli and Staphylococcus aureus. The inhalation time for treated acrylic fibers improved. The amount of colony growth on treated carpet reduced considerably and besides the mechanical tests results showed no significant deterioration effect of studied properties in comparing with untreated yarn.

Renal artery nerve distribution and density in the porcine model: biologic implications for the development of radiofrequency ablation therapies.

PubMed

Tellez, Armando; Rousselle, Serge; Palmieri, Taylor; Rate, William R; Wicks, Joan; Degrange, Ashley; Hyon, Chelsea M; Gongora, Carlos A; Hart, Randy; Grundy, Will; Kaluza, Greg L; Granada, Juan F

2013-12-01

Catheter-based renal artery denervation has demonstrated to be effective in decreasing blood pressure among patients with refractory hypertension. The anatomic distribution of renal artery nerves may influence the safety and efficacy profile of this procedure. We aimed to describe the anatomic distribution and density of periarterial renal nerves in the porcine model. Thirty arterial renal sections were included in the analysis by harvesting a tissue block containing the renal arteries and perirenal tissue from each animal. Each artery was divided into 3 segments (proximal, mid, and distal) and assessed for total number, size, and depth of the nerves according to the location. Nerve counts were greatest proximally (45.62% of the total nerves) and decreased gradually distally (mid, 24.58%; distal, 29.79%). The distribution in nerve size was similar across all 3 sections (∼40% of the nerves, 50-100 μm; ∼30%, 0-50 μm; ∼20%, 100-200 μm; and ∼10%, 200-500 μm). In the arterial segments ∼45% of the nerves were located within 2 mm from the arterial wall whereas ∼52% of all nerves were located within 2.5 mm from the arterial wall. Sympathetic efferent fibers outnumbered sensory afferent fibers overwhelmingly, intermixed within the nerve bundle. In the porcine model, renal artery nerves are seen more frequently in the proximal segment of the artery. Nerve size distribution appears to be homogeneous throughout the artery length. Nerve bundles progress closer to the arterial wall in the distal segments of the artery. This anatomic distribution may have implications for the future development of renal denervation therapies. Crown Copyright © 2013. Published by Mosby, Inc. All rights reserved.

Effects of Dietary Non-Fiber Carbohydrates on Composition and Function of Gut Microbiome in Monogastrics: A Review.

PubMed

Jiang, Hailong; Che, Dongsheng; Qin, Guixin; Kong, Xiangjie; Farouk, Mohammed Hamdy

2017-01-01

Non-fiber carbohydrates (NFC) have a crucial function on the gut health of monogastrics. This paper aims to review the relevant published materials on the influence of NFCs on the gut's microbial population and composition in monogastrics, and points out the areas of the required research. Total bacteria count and Lactobacillus sp. were decreased with an increase in composition of dietary NFC intake, as well as accompanied by a decrease in the short-chain fatty acids (SCFAs) levels. Consequently, some metabolites were affected by the accumulation of the bile acids, including molecules which control different gene expression levels, as regulators involved in glucose (FXR and TGR5) and fat metabolism (cholesterol). Cell proliferation rate of both gastrointestinal epithelium and microbiome cells was negatively correlated with the dietary NFC levels in many species of monogastric animals. Low levels of NFC diet are negatively associated with digestibility, total gut weight, and gastrointestinal secretions. High levels of dietary NFC have negative effects on the digestion and absorption of macronutrients, with an increase of the contact time of the carcinogens in the intestinal lumen. The data obtained from different animals' studies did not give the same results. In conclusion, dietary NFC should be adjusted to the optimal consumption levels as the human and the monogastric animals are anatomically and physiologically different. Digestion, metabolism, host wellbeing, and host behavior were negatively affected by the administration of high NFC levels. The relations between sulphate-reducing bacteria and some metabolic diseases such as diabetes mellitus and obesity need further exploration. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Performance evaluation of a slow-release packing material-embedded functional microorganisms for biofiltration.

PubMed

Zhu, Rencheng; Li, Shunyi; Wu, Zhenjun; Dumont, Éric

2017-04-01

A composite packing material (CM-5) was prepared in this study, mainly consisting of compost with functional microorganisms, calcium carbonate (CaCO 3 ), perlite, cement and plant fiber. To get stronger compressive strength, mass ratios of these components were optimized based on single factor experiments, and finally adding amounts of perlite, cement, plant fiber, CaCO 3 , compost and binder at 18%, 18%, 7%, 13%, 17% and 27%, respectively. According to the optimum proportion, CM-5 was extruded in cylindrical shape (12 mm in diameter and 20 mm in length) with a bulk density of 470 kg m -3 , a moisture retention capacity of 49% and the microbial counts of × 10 5 CFU g -1 of packing material. The cumulative release rates of total organic carbon (TOC) and total nitrogen (TN) from CM-5 were 3.1% and 6.5%, respectively, after 19 times extraction in distilled water. To evaluate the H 2 S removal capacity, CM-5 was compared with an organic (corncob) and an inorganic (ceramsite) packing material in three biofilters. The results showed that CM-5 had higher H 2 S removal capacity compared with corncob and ceramsite. CM-5 could avoid the large fluctuation of pH value and pressure drop during the operation. The maximum H 2 S removal capacity of CM-5 was 12.9 g m -3  h -1 and the removal efficiency could maintain over 95.4% when the inlet H 2 S loading rate was lower than 11.3 g m -3  h -1 without any addition of nutrients and pH buffer substances. Besides, only 2-3 days were needed for the recovery of biofiltration performance after about two weeks of idle period.

Biogeographical drivers of ragweed pollen concentrations in Europe

NASA Astrophysics Data System (ADS)

Matyasovszky, István; Makra, László; Tusnády, Gábor; Csépe, Zoltán; Nyúl, László G.; Chapman, Daniel S.; Sümeghy, Zoltán; Szűcs, Gábor; Páldy, Anna; Magyar, Donát; Mányoki, Gergely; Erostyák, János; Bodnár, Károly; Bergmann, Karl-Christian; Deák, Áron József; Thibaudon, Michel; Albertini, Roberto; Bonini, Maira; Šikoparija, Branko; Radišić, Predrag; Gehrig, Regula; Rybníček, Ondřej; Severova, Elena; Rodinkova, Victoria; Prikhodko, Alexander; Maleeva, Anna; Stjepanović, Barbara; Ianovici, Nicoleta; Berger, Uwe; Seliger, Andreja Kofol; Weryszko-Chmielewska, Elżbieta; Šaulienė, Ingrida; Shalaboda, Valentina; Yankova, Raina; Peternel, Renata; Ščevková, Jana; Bullock, James M.

2017-06-01

The drivers of spatial variation in ragweed pollen concentrations, contributing to severe allergic rhinitis and asthma, are poorly quantified. We analysed the spatiotemporal variability in 16-year (1995-2010) annual total (66 stations) and annual total (2010) (162 stations) ragweed pollen counts and 8 independent variables (start, end and duration of the ragweed pollen season, maximum daily and calendar day of the maximum daily ragweed pollen counts, last frost day in spring, first frost day in fall and duration of the frost-free period) for Europe (16 years, 1995-2010) as a function of geographical coordinates. Then annual total pollen counts, annual daily peak pollen counts and date of this peak were regressed against frost-related variables, daily mean temperatures and daily precipitation amounts. To achieve this, we assembled the largest ragweed pollen data set to date for Europe. The dependence of the annual total ragweed pollen counts and the eight independent variables against geographical coordinates clearly distinguishes the three highly infected areas: the Pannonian Plain, Western Lombardy and the Rhône-Alpes region. All the eight variables are sensitive to longitude through its temperature dependence. They are also sensitive to altitude, due to the progressively colder climate with increasing altitude. Both annual total pollen counts and the maximum daily pollen counts depend on the start and the duration of the ragweed pollen season. However, no significant changes were detected in either the eight independent variables as a function of increasing latitude. This is probably due to a mixed climate induced by strong geomorphological inhomogeneities in Europe.

Determination of the volume activity concentration of alpha artificial radionuclides with alpha spectrometer.

PubMed

Liu, B; Zhang, Q; Li, Y

1997-12-01

This paper introduces a method to determine the volume activity concentration of alpha and/or beta artificial radionuclides in the environment and radon/thoron progeny background-compensation based on a Si surface-barrier detector. By measuring the alpha peak counts of 218Po and 214Po in two time intervals, the activity concentration of 218Po, 214Pb and 214Bi aerosol particles were determined; meanwhile, the total beta count of 214Pb and 214Bi aerosols was also calculated from their decay scheme. With the average equilibrium factor of thoron progeny in general environment, the alpha and beta counts of thoron progeny were approximately evaluated by 212Po alpha peak counts. The alpha count of transuranic aerosols was determined by subtracting the trail counts of radon/thoron progeny alpha peaks. The total count of beta artificial radionuclides was determined by subtracting the beta counts of radon/thoron progeny aerosol particles. In our preliminary experiments, if the radon progeny concentration is less than 15 Bq m(-3), the lower limit of detection of transuranics concentration is less than 0.1 Bq m(-3). Even if the radon progeny concentration is as high as 75 Bq m(-3), the lower limit of detection of total beta activity concentration of artificial nuclides aerosols is less than 1 Bq m(-3).

Influence of polysaccharide-based edible coatings as carriers of prebiotic fibers on quality attributes of ready-to-eat fresh blueberries.

PubMed

Alvarez, María V; Ponce, Alejandra G; Moreira, María R

2018-05-01

Little information is available regarding the effect of dietary fibers added into edible coatings on quality attributes of ready-to-eat fruits. The aim of this study was to evaluate the effects of sodium alginate (AL) and chitosan (CH) edible coatings enriched with four different dietary fibers (apple fiber, orange fiber, inulin and oligofructose) on microbiological, nutritional, physico-chemical and sensorial properties of ready-to-eat fresh blueberries stored for 18 days at 5 °C. The most encouraging results were found for CH coatings (with and without fibers) which significantly inhibited the growth of mesophilic bacteria and yeasts/molds (reductions up to 1.9 log CFU g -1 ), reduced decay rate by more than 50%, enhanced antioxidant properties, retained fruit firmness, delayed off-odor development and improved overall visual quality of blueberries. Oligofructose and orange fiber added to CH coatings enhanced antioxidant properties of fruits and allowed higher reductions in yeast/mold counts compared to the use of CH alone. CH-based coatings enriched with inulin, oligofructose and apple fiber extended sensory shelf life of blueberries by 6 days. AL coatings (with and without fiber) allowed delaying fungal decay and also retaining antioxidant properties but did not improve the microbiological and sensory quality of fruits. The results proved that fiber-enriched CH treatments allowed the maintenance of freshness and the improvement of the quality of ready-to-eat blueberries. It might be an interesting option to offer consumers a healthy product with prebiotic potential and an extended shelf life. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Total nucleated cell and leukocyte differential counts in canine pleural and peritoneal fluid and equine synovial fluid samples: comparison of automated and manual methods.

PubMed

Brudvig, Jean M; Swenson, Cheryl L

2015-12-01

Rapid and precise measurement of total and differential nucleated cell counts is a crucial diagnostic component of cavitary and synovial fluid analyses. The objectives of this study included (1) evaluation of reliability and precision of canine and equine fluid total nucleated cell count (TNCC) determined by the benchtop Abaxis VetScan HM5, in comparison with the automated reference instruments ADVIA 120 and the scil Vet abc, respectively, and (2) comparison of automated with manual canine differential nucleated cell counts. The TNCC and differential counts in canine pleural and peritoneal, and equine synovial fluids were determined on the Abaxis VetScan HM5 and compared with the ADVIA 120 and Vet abc analyzer, respectively. Statistical analyses included correlation, least squares fit linear regression, Passing-Bablok regression, and Bland-Altman difference plots. In addition, precision of the total cell count generated by the VetScan HM5 was determined. Agreement was excellent without significant constant or proportional bias for canine cavitary fluid TNCC. Automated and manual differential counts had R(2)  < .5 for individual cell types (least squares fit linear regression). Equine synovial fluid TNCC agreed but with some bias due to the VetScan HM5 overestimating TNCC compared to the Vet abc. Intra-assay precision of the VetScan HM5 in 3 fluid samples was 2-31%. The Abaxis VetScan HM5 provided rapid, reliable TNCC for canine and equine fluid samples. The differential nucleated cell count should be verified microscopically as counts from the VetScan HM5 and also from the ADVIA 120 were often incorrect in canine fluid samples. © 2015 American Society for Veterinary Clinical Pathology.

A side-by-side comparison of Rotorod and Burkard pollen and spore collections.

PubMed

Crisp, Howard C; Gomez, Robert A; White, Kevin M; Quinn, James M

2013-08-01

The Rotorod sampler and Burkard spore trap are 2 devices commonly used to quantify airborne particles. To evaluate the differences in collections between the 2 devices for a wide range of plant pollens and fungal spores. Pollens and spores were collected simultaneously with each device on 167 days during a 1-year period. The Burkard yielded significantly higher total and individual mold spore counts. It yielded statistically higher total grass, total weed, and Urticaceae daily pollen counts, although the absolute differences were small. Daily counts were positively correlated between the 2 devices for the most abundant pollens and mold spores. The Burkard spore trap collects many more mold spores than the Rotorod over a wide variety of species. The Burkard also yielded higher total grass, total weed, and Urticaceae daily pollen counts. Despite these differences, however, either device can be used to follow trends in the most abundant pollen and mold spores. Copyright © 2013 American College of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

Characterization of time-resolved fluorescence response measurements for distributed optical-fiber sensing.

PubMed

Sinchenko, Elena; Gibbs, W E Keith; Davis, Claire E; Stoddart, Paul R

2010-11-20

A distributed optical-fiber sensing system based on pulsed excitation and time-gated photon counting has been used to locate a fluorescent region along the fiber. The complex Alq3 and the infrared dye IR-125 were examined with 405 and 780 nm excitation, respectively. A model to characterize the response of the distributed fluorescence sensor to a Gaussian input pulse was developed and tested. Analysis of the Alq3 fluorescent response confirmed the validity of the model and enabled the fluorescence lifetime to be determined. The intrinsic lifetime obtained (18.2±0.9 ns) is in good agreement with published data. The decay rate was found to be proportional to concentration, which is indicative of collisional deactivation. The model allows the spatial resolution of a distributed sensing system to be improved for fluorophores with lifetimes that are longer than the resolution of the sensing system.

Tapered fiber coupling of single photons emitted by a deterministically positioned single nitrogen vacancy center

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liebermeister, Lars, E-mail: lars.liebermeister@physik.uni-muenchen.de; Petersen, Fabian; Münchow, Asmus v.

2014-01-20

A diamond nano-crystal hosting a single nitrogen vacancy (NV) center is optically selected with a confocal scanning microscope and positioned deterministically onto the subwavelength-diameter waist of a tapered optical fiber (TOF) with the help of an atomic force microscope. Based on this nano-manipulation technique, we experimentally demonstrate the evanescent coupling of single fluorescence photons emitted by a single NV-center to the guided mode of the TOF. By comparing photon count rates of the fiber-guided and the free-space modes and with the help of numerical finite-difference time domain simulations, we determine a lower and upper bound for the coupling efficiency ofmore » (9.5 ± 0.6)% and (10.4 ± 0.7)%, respectively. Our results are a promising starting point for future integration of single photon sources into photonic quantum networks and applications in quantum information science.« less

On the passive probing of fiber optic quantum communication channels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Korol'kov, A. V., E-mail: sergei.kulik@gmail.co; Katamadze, K. G.; Kulik, S. P.

2010-04-15

Avalanche photodetectors based on InGaAs:P are the most sensitive and only detectors operating in the telecommunication wavelength range 1.30-1.55 {mu}m in the fiber optic quantum cryptography systems that can operate in the single photon count mode. In contrast to the widely used silicon photodetectors for wavelengths up to 1 {mu}m operating in a waiting mode, these detectors always operate in a gated mode. The production of an electron-hole pair in the process of the absorption of a photon and the subsequent appearance of an avalanche of carriers can be accompanied by the inverse processes of the recombination and emission ofmore » photons. Such a backward emission can present a potential serious problem for the stability of fiber optic quantum cryptography systems against passive probing. The results of analyzing the detection of backscattered radiation are reported. The probability of such an emission has been estimated.« less

[Prediction of the total Japanese cedar pollen counts based on male flower-setting conditions of standard trees].

PubMed

Yuta, Atsushi; Ukai, Kotaro; Sakakura, Yasuo; Tani, Hideshi; Matsuda, Fukiko; Yang, Tian-qun; Majima, Yuichi

2002-07-01

We made a prediction of the Japanese cedar (Cryptomeria japonica) pollen counts at Tsu city based on male flower-setting conditions of standard trees. The 69 standard trees from 23 kinds of clones, planted at Mie Prefecture Science and Technology Promotion Center (Hakusan, Mie) in 1964, were selected. Male flower-setting conditions for 276 faces (69 trees x 4 points of the compass) were scored from 0 to 3. The average of scores and total pollen counts from 1988 to 2000 was analyzed. As the results, the average scores from standard trees and total pollen counts except two mass pollen-scattered years in 1995 and 2000 had a positive correlation (r = 0.914) by linear function. On the mass pollen-scattered years, pollen counts were influenced from the previous year. Therefore, the score of the present year minus that of the previous year were used for analysis. The average scores from male flower-setting conditions and pollen counts had a strong positive correlation (r = 0.994) when positive scores by taking account of the previous year were analyzed. We conclude that prediction of pollen counts are possible based on the male flower-setting conditions of standard trees.

Alternative Fuels Data Center: Alternative Fueling Station Counts by State

Science.gov Websites

charging infrastructure. **Totals by States indicate the total number of stations for all fuel types combined. Individual stations are counted multiple times if the station offers multiple types of fuel. For

Fruit, vegetable, and fiber intake in relation to cancer risk: findings from the European Prospective Investigation into Cancer and Nutrition (EPIC).

PubMed

Bradbury, Kathryn E; Appleby, Paul N; Key, Timothy J

2014-07-01

Fruit, vegetables, and certain components of plant foods, such as fiber, have long been thought to protect against cancer. The European Prospective Investigation into Cancer and Nutrition (EPIC) is a prospective cohort that includes >500,000 participants from 10 European countries and has made a substantial contribution to knowledge in this research area. The purpose of this article is to summarize the findings published thus far from the EPIC study on the associations between fruit, vegetable, or fiber consumption and the risk of cancer at 14 different sites. The risk of cancers of the upper gastrointestinal tract was inversely associated with fruit intake but was not associated with vegetable intake. The risk of colorectal cancer was inversely associated with intakes of total fruit and vegetables and total fiber, and the risk of liver cancer was also inversely associated with the intake of total fiber. The risk of cancer of the lung was inversely associated with fruit intake but was not associated with vegetable intake; this association with fruit intake was restricted to smokers and might be influenced by residual confounding due to smoking. There was a borderline inverse association of fiber intake with breast cancer risk. For the other 9 cancer sites studied (stomach, biliary tract, pancreas, cervix, endometrium, prostate, kidney, bladder, and lymphoma) there were no reported significant associations of risk with intakes of total fruit, vegetables, or fiber. © 2014 American Society for Nutrition.

Dietary fiber intakes and insulin requirements in pregnant women with type 1 diabetes.

PubMed

Kalkwarf, H J; Bell, R C; Khoury, J C; Gouge, A L; Miodovnik, M

2001-03-01

To determine whether higher dietary fiber intake (water soluble and insoluble) is associated with lower insulin requirements and better glycemic control in pregnant women with type 1 diabetes consuming a self-selected diet. A longitudinal, observational study. Pregnant women (n=141) with type 1 diabetes participating in an interdisciplinary program examining the effects of glycemic control on pregnancy outcome (Diabetes and Pregnancy Program, University of Cincinnati Medical Center). We determined total, water soluble and insoluble fiber intakes from 3-day food records kept each trimester during pregnancy. Outcome measures were insulin dose, pre-meal blood glucose, and glycated hemoglobin concentrations. Correlation coefficients, multiple regression, mixed-model analysis of variance. Mean intakes (g/day) of total, water soluble fiber, and insoluble fiber were 14.0 (range, 1.8-33.1), 4.8 (range, 0.6-10.5) and 9.0 (range, 1.1-24.0), respectively. In the second and third trimesters of pregnancy, insulin requirements were inversely associated with total, water soluble, and insoluble fiber intakes; the correlation coefficients ranged from -0.22 to -0.17 (P=.02 to .08). Insulin requirements associated with a higher fiber intake (20.5 g/day) were 16% to 18% lower than for a lower fiber intake (8.1 g/day). These relations remained after adjustment for body weight, disease severity and duration, insulin type, and study year in the second (P=.03 to .10) but not in the third trimester. Pre-meal blood glucose and glycated hemoglobin concentrations were not associated with fiber intake. Among pregnant women with type 1 diabetes, higher fiber intake is associated with lower daily insulin requirements. Dietary fiber intake should be considered when counseling patients about the management of blood glucose concentrations.

A Prospective Study of Different Types of Dietary Fiber and Risk of Cardiovascular Disease: Tehran Lipid and Glucose Study.

PubMed

Mirmiran, Parvin; Bahadoran, Zahra; Khalili Moghadam, Sajad; Zadeh Vakili, Azita; Azizi, Fereidoun

2016-11-07

This study was designed to examine the hypothesis that dietary of intake different types of fiber could modify the risk of cardiovascular disease (CVD) in a large prospective cohort among Iranian adults. In 2006-2008, we used a validated food frequency questionnaire to assess dietary fiber intake among 2295 health professionals with no previous history of heart disease. Subjects were subsequently followed until 2012 for incidence of CVD events. Multivariate Cox proportional hazard regression models, adjusted for potential confounders were used to estimate the risk of CVD across tertiles of total dietary fiber and different types of fiber. Linear regression models were also used to indicate the association of dietary fiber intakes with changes of cardiovascular risk factors during the follow-up. Mean age of participants (42.8% men) was 38.2 ± 13.4, at baseline. Mean (SD) dietary intake of total fiber was 23.4 (8.9) g/day. After adjustment for cardiovascular risk score and dietary confounders, a significant inverse association was observed between intakes of total, soluble and insoluble dietary fiber and CVD risk, in the highest compared to the lowest tertiles (HR = 0.39, 95% CI = 0.18-0.83, HR = 0.19, 95% CI = 0.09-0.41, and HR = 0.31, 95% CI = 0.14-0.69, respectively). Inverse relations were observed between risk of CVD and dietary fiber from legumes, fruits and vegetables; however, dietary fiber intake from grain and nut sources was not related to risk of CVD. Our findings confirmed that higher intakes of dietary fiber from different sources is associated with CVD events and modify its major risk-related factors.

A Prospective Study of Different Types of Dietary Fiber and Risk of Cardiovascular Disease: Tehran Lipid and Glucose Study

PubMed Central

Mirmiran, Parvin; Bahadoran, Zahra; Khalili Moghadam, Sajad; Zadeh Vakili, Azita; Azizi, Fereidoun

2016-01-01

Background and aim: This study was designed to examine the hypothesis that dietary of intake different types of fiber could modify the risk of cardiovascular disease (CVD) in a large prospective cohort among Iranian adults. Methods: In 2006–2008, we used a validated food frequency questionnaire to assess dietary fiber intake among 2295 health professionals with no previous history of heart disease. Subjects were subsequently followed until 2012 for incidence of CVD events. Multivariate Cox proportional hazard regression models, adjusted for potential confounders were used to estimate the risk of CVD across tertiles of total dietary fiber and different types of fiber. Linear regression models were also used to indicate the association of dietary fiber intakes with changes of cardiovascular risk factors during the follow-up. Results: Mean age of participants (42.8% men) was 38.2 ± 13.4, at baseline. Mean (SD) dietary intake of total fiber was 23.4 (8.9) g/day. After adjustment for cardiovascular risk score and dietary confounders, a significant inverse association was observed between intakes of total, soluble and insoluble dietary fiber and CVD risk, in the highest compared to the lowest tertiles (HR = 0.39, 95% CI = 0.18–0.83, HR = 0.19, 95% CI = 0.09–0.41, and HR = 0.31, 95% CI = 0.14–0.69, respectively). Inverse relations were observed between risk of CVD and dietary fiber from legumes, fruits and vegetables; however, dietary fiber intake from grain and nut sources was not related to risk of CVD. Conclusion: Our findings confirmed that higher intakes of dietary fiber from different sources is associated with CVD events and modify its major risk-related factors. PMID:27827978

Ultrasonic Acoustic Emissions from the Sapwood of Thuja occidentalis Measured inside a Pressure Bomb 1

PubMed Central

Tyree, Melvin T.; Dixon, Michael A.; Thompson, Robert G.

1984-01-01

An improved method of counting acoustic emission (AE) events from water-stressed stems of cedar (Thuja occidentalis L.) is presented. Amplified AEs are analyzed on a real time basis by a microcomputer. The instrumentation counts AE events in a fashion nearly analogous to scintillation counting of radioactive materials. The technique was applied to measuring ultrasonic AEs from the stems of cedar inside a pressure bomb. The shoots were originally fully hydrated. When the shoots are dehydrated in the bomb by application of an overpressure very few AEs were detected. When the bomb pressure is reduced after dehydration of the shoot, AE events could be detected. We conclude that ultrasonic AEs are caused by cavitation events (= structural breakdown of water columns in the tracheids of cedar) and not by the breaking of cellulose fibers in the wood. PMID:16663501

Effects of Extended Freezer Storage on the Integrity of Human Milk.

PubMed

Ahrabi, Ali Faraghi; Handa, Deepali; Codipilly, Champa N; Shah, Syed; Williams, Janet E; McGuire, Mark A; Potak, Debra; Aharon, Grace Golda; Schanler, Richard J

2016-10-01

To examine the integrity (pH, bacterial counts, host defense factors, nutrient contents, and osmolality) of freshly expressed and previously refrigerated human milk subjected to long-term freezer storage. Mothers donated 100 mL of freshly expressed milk. Samples were divided into baseline, storage at -20°C (fresh frozen) for 1, 3, 6, and 9 months, and prior storage at +4°C for 72 hours (refrigerated frozen) before storage at -20°C for 1 to 9 months. Samples were analyzed for pH, total bacterial colony count, gram-positive and gram-negative colony counts, and concentrations of total protein, fat, nonesterified fatty acids, lactoferrin, secretory IgA, and osmolality. Milk pH, total bacterial colony count, and Gram-positive colony counts decreased significantly with freezer storage (P < .001); bacterial counts decreased most rapidly in the refrigerated frozen group. The gram-negative colony count decreased significantly over time (P < .001). Nonesterified fatty acid concentrations increased significantly with time in storage (P < .001). Freezing for up to 9 months did not affect total protein, fat, lactoferrin, secretory IgA, or osmolality in either group. Freezer storage of human milk for 9 months at -20°C is associated with decreasing pH and bacterial counts, but preservation of key macronutrients and immunoactive components, with or without prior refrigeration for 72 hours. These data support current guidelines for freezer storage of human milk for up to 9 months for both freshly expressed and refrigerated milk. Copyright © 2016 Elsevier Inc. All rights reserved.

Multi-parameter observation of environmental asbestos pollution at the Institut de Physique du Globe de Paris (Jussieu Campus, France).

PubMed

Besson, P; Lalanne, F X; Wang, Y; Guyot, F

1999-11-01

An original multi-parameter system has been used to study the nature of dust in the ambient air, particularly the total fibers and asbestos fibers, in eight areas of the Institut de Physique de Globe de Paris (France). These analyses provide a detailed case study of environmental pollution by asbestos fibers at low levels. The levels of total fibers with a length greater than 3 microns, measured with a real time fiber analyser monitor (FAM), give a baseline of 2.5 fibers per l., throughout the duration of sampling. The same levels, calculated during periods of effective presence of staff, are smaller than 10 fb per l. During these periods, the instantaneous value can show high peaks, reaching a maximum of 60 fb per l., but more often of about 5 to 10 fb per l. A direct cause and effect relationship exists between fiber concentrations and the presence of people, and indirectly with the variation of the other environmental parameters (temperature, humidity, air velocity). The baseline concentration of asbestos fibers, determined by analytical transmission electron microscopy (ATEM), is about 10(-1) fb per l., with a mean value during the presence of people always less than 1.5 fb per l. The low levels of asbestos fibers do not allow us to establish a precise correlation between the concentration of total fibers and the asbestos concentration, but a rough estimate suggests that asbestos could represent 10-20% of the airborne fibers monitored with the FAM. The statistical study of fiber sizes shows that 70 and 55% of analyzed chrysotile and amosite fibers respectively are smaller than 5 microns. These numbers are 40 and 35% for fibers smaller than 3 microns, which are undetected by the FAM. Amosite, which characterizes most of the asbestos-containing materials (ACM) in the analyzed areas, is detected in the ambient air in quantities ten times less important than chrysotile. The low asbestos levels and the difference between the nature of building asbestos and airborne fibers, show that the mean measured asbestos contents in the ambient air represent the geochemical background of chrysotile asbestos fibers in the Parisian air.

Cytoprotection: Immune and Matrix Modulation of Tissue Repair

DTIC Science & Technology

2012-04-01

bronchoalveolar lavage (BAL) fluid for cytokines, cell counts and eosinophilia, and histological analysis of airway hyper-responsiveness and remodeling...OVA administered intra-nasally on Days 21–25 with or without 0.1% XHA. B) Total leukocyte and eosinophil counts in bronchoalveolar lavage (BAL) fluid...and different doses of HA peptide. The absolute number of Tmr+ and FOXP3+ populations was determined using total cell counts and flow cytometry for Tmr

What is harmful for male fertility: cell phone or the wireless Internet?

PubMed

Yildirim, Mehmet Erol; Kaynar, Mehmet; Badem, Huseyin; Cavis, Mucahıt; Karatas, Omer Faruk; Cimentepe, Ersın

2015-09-01

In this study, we aimed to assess the potential harmful effects of radiofrequency-electromagnetic radiation on sperm parameters. We requested semen for analyses from the male patients coming to our infertility division and also asked them to fill out an anonymous questionnaire. We queried their mobile phone and wireless Internet usage frequencies in order to determine their radiofrequency-electromagnetic radiation exposure. A total of 1082 patients filled the questionnaire but 51 of them were excluded from the study because of azoospermia. There was no significant difference between sperm counts and sperm morphology excluding sperm motility, due to mobile phone usage period, (p = 0.074, p = 0.909, and p = 0.05, respectively). The total motile sperm count and the progressive motile sperm count decreased due to the increase of internet usage (p = 0.032 and p = 0.033, respectively). In line with the total motile sperm count, progressive motile sperm count also decreased with wireless Internet usage compared with the wired Internet connection usage (p = 0.009 and p = 0.018, respectively). There was a negative correlation between wireless Internet usage duration and the total sperm count (r = -0.089, p = 0.039). We have also explored the negative effect of wireless Internet use on sperm motility according to our preliminary results. Copyright © 2015. Published by Elsevier Taiwan.

Brillouin lasing in single-mode tapered optical fiber with inscribed fiber Bragg grating array

NASA Astrophysics Data System (ADS)

Popov, S. M.; Butov, O. V.; Chamorovskiy, Y. K.; Isaev, V. A.; Kolosovskiy, A. O.; Voloshin, V. V.; Vorob'ev, I. L.; Vyatkin, M. Yu.; Mégret, P.; Odnoblyudov, M.; Korobko, D. A.; Zolotovskii, I. O.; Fotiadi, A. A.

2018-06-01

A tapered optical fiber has been manufactured with an array of fiber Bragg gratings (FBG) inscribed during the drawing process. The total fiber peak reflectivity is 5% and the reflection bandwidth is ∼3.5 nm. A coherent frequency domain reflectometry has been applied for precise profiling of the fiber core diameter and grating reflectivity both distributed along the whole fiber length. These measurements are in a good agreement with the specific features of Brillouin lasing achieved in the semi-open fiber cavity configuration.

Basalt fiber and nanoclay compositions, articles incorporating the same, and methods of insulating a rocket motor with the same

NASA Technical Reports Server (NTRS)

Gajiwala, Himansu M. (Inventor)

2010-01-01

An insulation composition that comprises at least one nitrile butadiene rubber, basalt fibers, and nanoclay is disclosed. Further disclosed is an insulation composition that comprises polybenzimidazole fibers, basalt fibers, and nanoclay. The basalt fibers may be present in the insulation compositions in a range of from approximately 1% by weight to approximately 6% by weight of the total weight of the insulation composition. The nanoclay may be present in the insulation compositions in a range of from approximately 5% by weight to approximately 10% by weight of the total weight of the insulation composition. Rocket motors including the insulation compositions and methods of insulating a rocket motor are also disclosed.

Rocket motors incorporating basalt fiber and nanoclay compositions and methods of insulating a rocket motor with the same

NASA Technical Reports Server (NTRS)

Gajiwala, Himansu M. (Inventor)

2011-01-01

An insulation composition that comprises at least one nitrile butadiene rubber, basalt fibers, and nanoclay is disclosed. Further disclosed is an insulation composition that comprises polybenzimidazole fibers, basalt fibers, and nanoclay. The basalt fibers may be present in the insulation compositions in a range of from approximately 1% by weight to approximately 6% by weight of the total weight of the insulation composition. The nanoclay may be present in the insulation compositions in a range of from approximately 5% by weight to approximately 10% by weight of the total weight of the insulation composition. Rocket motors including the insulation compositions and methods of insulating a rocket motor are also disclosed.

BIOCHEMICAL COMPOSITION AND NUTRITIONAL EVALUATION OF BARLEY RIHANE (HORDEUM VULGARE L.).

PubMed

Lahouar, Lamia; Ghrairi, Fatma; El Arem, Amira; Medimagh, Sana; El Felah, Mouledi; Salem, Hichem Ben; Achour, Lotfi

2017-01-01

Many experimental studies have suggested an important role for barley Rihane(BR)in the prevention of colon cancer and cardiovascular diseases. The objective of this study was to evaluate the physico-chemical properties and nutritional characterizations of BR compared to other varieties grown in Tunisia (Manel, Roho and Tej). Total, insoluble and soluble dietary fiber(β-glucan), total protein, ash and some minerals of BR and Tunisian barley varieties were determined. The results revealed that BR is good source of dietary fiber mainly β-glucan compared to the other varieties. This variety is a relatively rich source of phosphorous and potassium and it contains many important unsaturated fatty acids. BR has higher nutritional value than other varieties. Barley Rihane has significant nutritional characterizations compared to others Tunisian barleys varieties. Abbreviations: BR, Barley Rihane; LDL, low density lipoprotein; HDL, high density lipoprotein; AOM, azoxymethane; TBV, Tunisian barley varieties; TGW, thousand grain weight; SW, weight specific; TDF, total dietary fiber; IDF, insoluble dietary fiber; SDF, soluble dietary fiber; DM, Dry Matter.

Effects of different sources of physically effective fiber on rumen microbial populations.

PubMed

Shaw, C N; Kim, M; Eastridge, M L; Yu, Z

2016-03-01

Physically effective fiber is needed by dairy cattle to prevent ruminal acidosis. This study aimed to examine the effects of different sources of physically effective fiber on the populations of fibrolytic bacteria and methanogens. Five ruminally cannulated Holstein cows were each fed five diets differing in physically effective fiber sources over 15 weeks (21 days/period) in a Latin Square design: (1) 44.1% corn silage, (2) 34.0% corn silage plus 11.5% alfalfa hay, (3) 34.0% corn silage plus 5.1% wheat straw, (4) 36.1% corn silage plus 10.1% wheat straw, and (5) 34.0% corn silage plus 5.5% corn stover. The impact of the physically effective fiber sources on total bacteria and archaea were examined using denaturing gradient gel electrophoresis. Specific real-time PCR assays were used to quantify total bacteria, total archaea, the genus Butyrivibrio, Fibrobacter succinogenes, Ruminococcus albus, Ruminococcus flavefaciens and three uncultured rumen bacteria that were identified from adhering ruminal fractions in a previous study. No significant differences were observed among the different sources of physical effective fiber with respect to the microbial populations quantified. Any of the physically effective fiber sources may be fed to dairy cattle without negative impact on the ruminal microbial community.

Sericin and swimming on histomorphometric parameters of denervated plantar muscle in Wistar rats.

PubMed

Santana, André Junior; Debastiani, Jean Carlos; Buratti, Pâmela; Peretti, Ana Luiza; Kunz, Regina Inês; Brancalhão, Rose Meire Costa; Ribeiro, Lucinéia de Fátima Chasko; Torrejais, Márcia Miranda; Bertolini, Gladson Ricardo Flor

2018-01-01

Objective To analyze the combined effects of the silk protein sericin and swimming exercise on histomorphometry of the plantar muscle in Wistar rats. Methods Forty adult rats were randomly allocated into 5 groups comprising 8 animals each, as follows: Control, Injury, Sericin, Swim, and Swim plus Sericin. Three days after crushing of the sciatic nerve the rats in the Swim and Swim plus Sericin Groups were submitted to swimming exercise for 21 days. Rats were then euthanized and the plantar muscle harvested and processed. Results Cross-sectional area, peripheral nuclei and muscle fiber counts, nucleus/fiber ratio and smallest muscle fiber width did not differ significantly between groups. Morphological analysis revealed hypertrophic fibers in the Swim Group and evident muscle damage in the Swim plus Sericin and Injury Groups. The percentage of intramuscular collagen was apparently maintained in the Swim Group compared to remaining groups. Conclusion Combined treatment with sericin and swimming exercise did not improve muscle properties. However, physical exercise alone was effective in maintaining intramuscular connective tissue and preventing progression of deleterious effects of peripheral nerve injury.

High Fiber and Low Starch Intakes Are Associated with Circulating Intermediate Biomarkers of Type 2 Diabetes among Women.

PubMed

AlEssa, Hala B; Ley, Sylvia H; Rosner, Bernard; Malik, Vasanti S; Willett, Walter C; Campos, Hannia; Hu, Frank B

2016-02-01

Carbohydrate quality has been consistently related to the risk of type 2 diabetes (T2D). However, limited information is available about the effect of carbohydrate quality on biomarkers related to T2D. We examined the associations of carbohydrate quality measures (CQMs) including carbohydrate intake; starch intake; glycemic index; glycemic load; total, cereal, fruit, and vegetable fiber intakes; and different combinations of these nutrients with plasma concentrations of adiponectin, C-reactive protein (CRP), and glycated hemoglobin (HbA1c). This is a cross-sectional analysis of 2458 diabetes-free women, ages 43-70 y, in the Nurses Health Study. CQMs were estimated from food-frequency questionnaires, and averages from 1984, 1986, and 1990 were used. Plasma biomarkers were collected in 1990. Multiple linear regression models were used to assess the associations between CQMs and biomarkers. After age, body mass index, lifestyle, and dietary variables were adjusted, 1) total fiber intake was positively associated with adiponectin (P-trend = 0.004); 2) cereal fiber intake was positively associated with adiponectin and inversely associated with CRP, and fruit fiber intake was negatively associated with HbA1c concentrations (all P-trend < 0.03); 3) starch intake was inversely associated with adiponectin (P-trend = 0.02); 4) a higher glycemic index was associated with lower adiponectin and higher HbA1c (both P-trend < 0.05); 5) a higher carbohydrate-to-total fiber intake ratio was associated with lower adiponectin (P-trend = 0.005); 6) a higher starch-to-total fiber intake ratio was associated with lower adiponectin and higher HbA1c (both P-trend < 0.05); and 7) a higher starch-to-cereal fiber intake ratio was associated with lower adiponectin (P-trend = 0.002). A greater fiber intake and a lower starch-to-fiber intake ratio are favorably associated with adiponectin and HbA1c, but only cereal fiber intake was associated with CRP in women. Further research is warranted to understand the potential mechanism of these associations in early progression of T2D. © 2016 American Society for Nutrition.

Changes in total viable count and TVB-N content in marinated chicken breast fillets during storage

NASA Astrophysics Data System (ADS)

Baltić, T.; Ćirić, J.; Velebit, B.; Petronijević, R.; Lakićević, B.; Đorđević, V.; Janković, V.

2017-09-01

Marination is a popular technique for enhancing meat properties. Depending on the marinade type and ingredients added, marination can improve sensory, chemical and microbiological quality of meat products. In this study, the total viable count and total volatile basic nitrogen (TVB-N) content in marinated chicken breast fillets were investigated. The possible correlation between bacterial growth and formation of TVB-N was also tested. Chicken breast fillets were immersed in a solution of table salt (as a control) orthree different marinades,which consisted of table salt, sodium tripolyphosphate and/or sodium citrate, and stored in air for nine days at 4±1°C. Analyses of the total viable count and TVB-N were performed on days0, 3, 6 and 9 day of storage. The total viable count gradually increased in all examined groups, and statistically significant differences (p<0.01 p<0.05) between treatments on days0, 3 and 6 day of storage were established. TVB-N values in marinated chicken were significantly higher (p<0.01 p<0.05) compared to the control. Using the multiple linear regression, a positive correlation between total viable count and formation of TVB-N in chicken marinated with sodium citrate was established (p<0.05), while the intensity of TVB-N formation was lowest in chicken marinated with sodium tripolyphosphate.

Prevalence of Vibrio vulnificus and Vibrio parahaemolyticus in the Maryland Coastal Bays

NASA Astrophysics Data System (ADS)

De Pascuale, V. O.

2016-02-01

The bacterial family of Vibrionaceae is indigenous in the marine estuarine environments such as the Maryland Coastal Bays. Vibrio vulnificus and Vibrio parahaemolyticus are both pathogenic bacteria. Understanding the distribution of Vibrio species is crucial because of the health concerns associated with the bacteria. The aim of this study was to evaluate the overall abundance of bacteria with a focus on Vibrio species in the Maryland Coastal Bays. Seawater samples were collected from 10 different sites that differ with regard to water quality. The total bacteria count (TBC) was determined by two methods: Total plate count and Epifluorescence microscopy. The most-probable-number (MPN) methodology was used to estimate the population of Vibrio parahaemolyticus and Vibrio vulnificus. In addition to the bacteriological analysis, the environmental parameters of temperature and salinity were measured using YSI 6600 multiparameter meter. The average total bacteria count was 2.21 log CFU ml-1. Vibrio vulnificus comprised 5% of the total bacteria count while Vibrio parahaemolyticus comprised only 2% of the total bacteria count. Vibrio vulnificus ranged from 0.30 to 2.48 log MPN ml-1 at the sites tested. Lower Vibrio parahaemolyticus count was observed at the sites with a range of 0.30 to 1.97 log MPN ml-1. There was no significant correlation between the environmental parameters and the Vibrio spp. Since both Vibrio vulnificus and Vibrio parahaemolyticus peak in the summer, there is a potential for a risk of wound infections and gastrointestinal illness based on this data.

Immature germ cells in semen - correlation with total sperm count and sperm motility.

PubMed

Patil, Priya S; Humbarwadi, Rajendra S; Patil, Ashalata D; Gune, Anita R

2013-07-01

Current data regarding infertility suggests that male factor contributes up to 30% of the total cases of infertility. Semen analysis reveals the presence of spermatozoa as well as a number of non-sperm cells, presently being mentioned in routine semen report as "round cells" without further differentiating them into leucocytes or immature germ cells. The aim of this work was to study a simple, cost-effective, and convenient method for differentiating the round cells in semen into immature germ cells and leucocytes and correlating them with total sperm counts and motility. Semen samples from 120 males, who had come for investigation for infertility, were collected, semen parameters recorded, and stained smears studied for different round cells. Statistical analysis of the data was done to correlate total sperm counts and sperm motility with the occurrence of immature germ cells and leucocytes. The average shedding of immature germ cells in different groups with normal and low sperm counts was compared. The clinical significance of "round cells" in semen and their differentiation into leucocytes and immature germ cells are discussed. Round cells in semen can be differentiated into immature germ cells and leucocytes using simple staining methods. The differential counts mentioned in a semen report give valuable and clinically relevant information. In this study, we observed a negative correlation between total count and immature germ cells, as well as sperm motility and shedding of immature germ cells. The latter was statistically significant with a P value 0.000.

Energy-resolved fast neutron resonance radiography at CSNS

NASA Astrophysics Data System (ADS)

Tan, Zhixin; Tang, Jingyu; Jing, Hantao; Fan, Ruirui; Li, Qiang; Ning, Changjun; Bao, Jie; Ruan, Xichao; Luan, Guangyuan; Feng, Changqin; Zhang, Xianpeng

2018-05-01

The white neutron beamline at the China Spallation Neutron Source will be used mainly for nuclear data measurements. It will be characterized by high flux and broad energy spectra. To exploit the beamline as a neutron imaging source, we propose a liquid scintillator fiber array for fast neutron resonance radiography. The fiber detector unit has a small exposed area, which will limit the event counts and separate the events in time, thus satisfying the requirements for single-event time-of-flight (SEToF) measurement. The current study addresses the physical design criteria for ToF measurement, including flux estimation and detector response. Future development and potential application of the technology are also discussed.

[Left ventricular volume determination by first-pass radionuclide angiocardiography using a semi-geometric count-based method].

PubMed

Kinoshita, S; Suzuki, T; Yamashita, S; Muramatsu, T; Ide, M; Dohi, Y; Nishimura, K; Miyamae, T; Yamamoto, I

1992-01-01

A new radionuclide technique for the calculation of left ventricular (LV) volume by the first-pass (FP) method was developed and examined. Using a semi-geometric count-based method, the LV volume can be measured by the following equation: CV = CM/(L/d). V = (CT/CV) x d3 = (CT/CM) x L x d2. (V = LV volume, CV = voxel count, CM = the maximum LV count, CT = the total LV count, L = LV depth where the maximum count was obtained, and d = pixel size.) This theorem was applied to FP LV images obtained in the 30-degree right anterior oblique position. Frame-mode acquisition was performed and the LV end-diastolic maximum count and total count were obtained. The maximum LV depth was obtained as the maximum width of the LV on the FP end-diastolic image, using the assumption that the LV cross-section is circular. These values were substituted in the above equation and the LV end-diastolic volume (FP-EDV) was calculated. A routine equilibrium (EQ) study was done, and the end-diastolic maximum count and total count were obtained. The LV maximum depth was measured on the FP end-diastolic frame, as the maximum length of the LV image. Using these values, the EQ-EDV was calculated and the FP-EDV was compared to the EQ-EDV. The correlation coefficient for these two values was r = 0.96 (n = 23, p less than 0.001), and the standard error of the estimated volume was 10 ml.(ABSTRACT TRUNCATED AT 250 WORDS)

Compact Efficient Lidar Receiver for Measuring Atmospheric Aerosols

NASA Technical Reports Server (NTRS)

Gili, Christopher; De Young, Russell

2006-01-01

A small, light weight, and efficient aerosol lidar receiver was constructed and tested. Weight and space savings were realized by using rigid optic tubes and mounting cubes to package the steering optics and detectors in a compact assembly. The receiver had a 1064nm channel using an APD detector. The 532nm channel was split (90/10) into an analog channel (90%) and a photon counting channel (10%). The efficiency of the 1064nm channel with optical filter was 44.0%. The efficiency of the analog 532nm channel was 61.4% with the optical filter, and the efficiency of the 532nm photon counting channel was 7.6% with the optical filter. The results of the atmospheric tests show that the detectors were able to consistently return accurate results. The lidar receiver was able to detect distinct cloud layers, and the lidar returns also agreed across the different detectors. The use of a light weight fiber-coupled telescope reduced weight and allowed great latitude in detector assembly positioning due to the flexibility enabled by the use of fiber optics. The receiver is now ready to be deployed for aircraft or ground based aerosol lidar measurements.

Yeasts from Marine and Estuarine Waters with Different Levels of Pollution in the State of Rio de Janeiro, Brazil

PubMed Central

Hagler, Allen N.; Mendonça-Hagler, Leda C.

1981-01-01

Yeast counts were made at 24 marine and estuarine sites in the vicinity of Rio de Janeiro, Brazil. Mean salinities of estuarine sites ranged from 14.2 to 27.4‰, and mean temperatures ranged from 25 to 28°C. Total coliform counts varied from 80% above 100,000 colony-forming units (CFU)/100 ml at heavily polluted sites to 100% below 100 CFU/100 ml at unpolluted sites. Total yeast counts above 100 CFU/100 ml were typical of heavily and moderately polluted water but atypical of lightly polluted and unpolluted water. Mean total yeast counts were 2,880 CFU/100 ml for heavily polluted sites, 202 CFU/100 ml for moderately polluted sites, and 3 CFU/100 ml for lightly polluted and unpolluted sites. Total yeast counts had a positive response to increased pollution levels, and Candida krusei and phenotypically similar yeasts as a group were prevalent in polluted estuarine water but rare in unpolluted seawater. The 549 strains of yeasts and yeast-like organisms isolated were grouped into 67 species, of which the 21 most prevalent made up 86% of the total yeast population. The prevalent genera in the polluted estuary were Candida, Rhodotorula, Torulopsis, Hanseniaspora, Debaryomyces, and Trichosporon. PMID:16345683

Quantum key distribution over a 72 dB channel loss using ultralow dark count superconducting single-photon detectors.

PubMed

Shibata, Hiroyuki; Honjo, Toshimori; Shimizu, Kaoru

2014-09-01

We report the first quantum key distribution (QKD) experiment over a 72 dB channel loss using superconducting nanowire single-photon detectors (SSPD, SNSPD) with the dark count rate (DCR) of 0.01 cps. The DCR of the SSPD, which is dominated by the blackbody radiation at room temperature, is blocked by introducing cold optical bandpass filter. We employ the differential phase shift QKD (DPS-QKD) scheme with a 1 GHz system clock rate. The quantum bit error rate (QBER) below 3% is achieved when the length of the dispersion shifted fiber (DSF) is 336 km (72 dB loss), which is low enough to generate secure keys.

Long-distance practical quantum key distribution by entanglement swapping.

PubMed

Scherer, Artur; Sanders, Barry C; Tittel, Wolfgang

2011-02-14

We develop a model for practical, entanglement-based long-distance quantum key distribution employing entanglement swapping as a key building block. Relying only on existing off-the-shelf technology, we show how to optimize resources so as to maximize secret key distribution rates. The tools comprise lossy transmission links, such as telecom optical fibers or free space, parametric down-conversion sources of entangled photon pairs, and threshold detectors that are inefficient and have dark counts. Our analysis provides the optimal trade-off between detector efficiency and dark counts, which are usually competing, as well as the optimal source brightness that maximizes the secret key rate for specified distances (i.e. loss) between sender and receiver.

Point counts of landbirds in bottomland hardwood forests of the Mississippi Alluvial Valley: How long and how many?

USGS Publications Warehouse

Smith, W.P.; Wiedenfeld, D.A.; Hanel, P.B.; Twedt, D.J.; Ford, R.P.; Cooper, R.J.; Smith, Winston Paul

1993-01-01

To quantify efficacy of point count sampling in bottomland hardwood forests, we examined the influence of point count duration on corresponding estimates of number of individuals and species recorded. To accomplish this we conducted a totalof 82 point counts 7 May-16 May 1992distributed among three habitats (Wet, Mesic, Dry) in each of three regions within the lower Mississippi Alluvial Valley (MAV). Each point count consisted of recording the number of individual birds (all species) seen or heard during the initial three minutes and per each minute thereafter for a period totaling ten minutes. In addition, we included 384 point counts recorded during an 8-week period in each of 3 years (1985-1987) among 56 randomly-selected forest patches within the bottomlands of western Tennessee. Each point count consisted of recording the number of individuals (excluding migrating species) during each of four, 5 minute intervals for a period totaling 20 minutes. To estimate minimum sample size, we determined sampling variation at each level (region, habitat, and locality) with the 82 point counts from the lower (MAV) and applied the procedures of Neter and Wasserman (1974:493; Applied linear statistical models). Neither the cumulative number of individuals nor number of species per sampling interval attained an asymptote after 10 or 20 minutes of sampling. For western Tennessee bottomlands, total individual and species counts relative to point count duration were similar among years and comparable to the pattern observed throughout the lower MAV. Across the MAV, we recorded a total of 1,62 1 birds distributed among 52 species with the majority (8721/1621) representing 8 species. More birds were recorded within 25-50 m than in either of the other distance categories. There was significant variation in numbers of individuals and species among point counts. For both, significant differences between region and patch (nested within region) occurred; neither habitat nor interaction between habitat and region was significant. For = 0.05 and L3 = 0.10, minimum sample size estimates (per factor level) varied by orders of magnitude depending upon the observed or specified range of desired detectable difference. For observed regional variation, 20 and 40 point counts were required to accommodate variability in total birds (MSE = 9.28) and species (MSE = 3.79), respectively; 25 percent of the mean could be achieved with 5 counts per factor level. Corresponding sample sizes required to detect differences of rarer species (e.g., Wood Thrush) were 500; for common species (e.g., Northern Cardinal) this same level of precision could be achieved with 100 counts.

Commercial breakfast cereals available in Mexican markets and their contribution in dietary fiber, β-glucans and protein quality by rat bioassays.

PubMed

Falcón-Villa, María R; Barrón-Hoyos, Jesús M; Cinco-Moroyoqui, Francisco J

2014-09-01

The beneficial effect of dietary fiber (DF) consumption has long been recognized. The global economy and open market trade policies have increased the availability of food products in Mexican markets, resulting in a wide variety of ready-to-eat commercial breakfast cereals classified as 'high fiber'. This research was aimed to evaluate the total dietary fiber contents, its fractions (soluble and insoluble) and β-glucan in 13 commercial 'high-fiber' breakfast cereals, as well as to evaluate their protein quality by rat bioassays. Commercial 'high-fiber' breakfast cereals had 7.42-39.82% insoluble dietary fiber, 2.53-12.85% soluble dietary fiber, and 0.45-4.96% β-glucan. These ready-to-eat commercial 'high-fiber' breakfast cereals differed significantly in their total dietary fiber, their soluble and insoluble DF fractions, and also in their β-glucan contents. When supplied as experimental diets, in 14-day rat feeding trials, the 'high-fiber' breakfast cereals showed an adverse effect on the % N digestibility but protein utilization, as measured as net protein ratio (NPR), was not significantly affected. The consumption of these commercial breakfast cereals, especially those made of oats as the basic ingredient, is highly recommended, since these products, being a concentrated source of dietary fiber, do not affect their protein quality.

Somatic cell counts in bulk milk and their importance for milk processing

NASA Astrophysics Data System (ADS)

Savić, N. R.; Mikulec, D. P.; Radovanović, R. S.

2017-09-01

Bulk tank milk somatic cell counts are the indicator of the mammary gland health in the dairy herds and may be regarded as an indirect measure of milk quality. Elevated somatic cell counts are correlated with changes in milk composition The aim of this study was to assess the somatic cell counts that significantly affect the quality of milk and dairy products. We examined the somatic cell counts in bulk tank milk samples from 38 farms during the period of 6 months, from December to the May of the next year. The flow cytometry, Fossomatic was used for determination of somatic cell counts. In the same samples content of total proteins and lactose was determined by Milcoscan. Our results showed that average values for bulk tank milk samples were 273,605/ml from morning milking and 292,895/ml from evening milking. The average values for total proteins content from morning and evening milking are 3,31 and 3,34%, respectively. The average values for lactose content from morning and evening milking are 4,56 and 4,63%, respectively. The highest somatic cell count (516,000/ml) was detected in bulk tank milk sample from evening milk in the Winter and the lowest content of lactose was 4,46%. Our results showed that obtained values for bulk tank milk somatic cell counts did not significantly affected the content of total proteins and lactose.

Chronic In Vivo Stability Assessment of Carbon Fiber Microelectrode Arrays

PubMed Central

Patel, Paras R.; Zhang, Huanan; Robbins, Matthew T.; Nofar, Justin B.; Marshall, Shaun P.; Kobylarek, Michael J.; Kozai, Takashi D. Y.; Kotov, Nicholas A.; Chestek, Cynthia A.

2016-01-01

Objective Individual carbon fiber microelectrodes can record unit activity in both acute and semi-chronic (∼1 month) implants. Additionally, new methods have been developed to insert a 16 channel array of carbon fiber microelectrodes. Before assessing the in vivo long-term viability of these arrays, accelerated soak tests were carried out to determine the most stable site coating material. Next, a multi-animal, multi-month, chronic implantation study was carried out with carbon fiber microelectrode arrays and silicon electrodes. Approach Carbon fibers were first functionalized with one of two different formulations of PEDOT and subjected to accelerated aging in a heated water bath. After determining the best PEDOT formula to use, carbon fiber arrays were chronically implanted in rat motor cortex. Some rodents were also implanted with a single silicon electrode, while others received both. At the end of the study a subset of animals were perfused and the brain tissue sliced. Tissue sections were stained for astrocytes, microglia, and neurons. The local reactive responses were assessed using qualitative and quantitative methods. Main results Electrophysiology recordings showed the carbon fibers detecting unit activity for at least 3 months with average amplitudes of ∼200 μV. Histology analysis showed the carbon fiber arrays with a minimal to non-existent glial scarring response with no adverse effects on neuronal density. Silicon electrodes showed large glial scarring that impacted neuronal counts. Significance This study has validated the use of carbon fiber microelectrode arrays as a chronic neural recording technology. These electrodes have demonstrated the ability to detect single units with high amplitude over 3 months, and show the potential to record for even longer periods. In addition, the minimal reactive response should hold stable indefinitely, as any response by the immune system may reach a steady state after 12 weeks. PMID:27705958

Chronic in vivo stability assessment of carbon fiber microelectrode arrays

NASA Astrophysics Data System (ADS)

Patel, Paras R.; Zhang, Huanan; Robbins, Matthew T.; Nofar, Justin B.; Marshall, Shaun P.; Kobylarek, Michael J.; Kozai, Takashi D. Y.; Kotov, Nicholas A.; Chestek, Cynthia A.

2016-12-01

Objective. Individual carbon fiber microelectrodes can record unit activity in both acute and semi-chronic (∼1 month) implants. Additionally, new methods have been developed to insert a 16 channel array of carbon fiber microelectrodes. Before assessing the in vivo long-term viability of these arrays, accelerated soak tests were carried out to determine the most stable site coating material. Next, a multi-animal, multi-month, chronic implantation study was carried out with carbon fiber microelectrode arrays and silicon electrodes. Approach. Carbon fibers were first functionalized with one of two different formulations of PEDOT and subjected to accelerated aging in a heated water bath. After determining the best PEDOT formula to use, carbon fiber arrays were chronically implanted in rat motor cortex. Some rodents were also implanted with a single silicon electrode, while others received both. At the end of the study a subset of animals were perfused and the brain tissue sliced. Tissue sections were stained for astrocytes, microglia, and neurons. The local reactive responses were assessed using qualitative and quantitative methods. Main results. Electrophysiology recordings showed the carbon fibers detecting unit activity for at least 3 months with average amplitudes of ∼200 μV. Histology analysis showed the carbon fiber arrays with a minimal to non-existent glial scarring response with no adverse effects on neuronal density. Silicon electrodes showed large glial scarring that impacted neuronal counts. Significance. This study has validated the use of carbon fiber microelectrode arrays as a chronic neural recording technology. These electrodes have demonstrated the ability to detect single units with high amplitude over 3 months, and show the potential to record for even longer periods. In addition, the minimal reactive response should hold stable indefinitely, as any response by the immune system may reach a steady state after 12 weeks.

Theoretical study of the effect of pump wavelength drift on mode instability in a high-power fiber amplifier

NASA Astrophysics Data System (ADS)

Liu, Yakun; Tao, Rumao; Su, Rongtao; Wang, Xiaolin; Ma, Pengfei; Zhang, Hanwei; Zhou, Pu; Si, Lei

2018-04-01

This paper presents an investigation of the effect of pump wavelength drift on the threshold of mode instability (MI) in high-power ytterbium-doped fiber lasers. By using a semi-analytical model, we study the effects of pump wavelength drift with a central pump wavelength around 976 nm and 915 nm, respectively. The influences of the pump absorption coefficient and total pump absorption are considered simultaneously. The results indicate that the effect of pump wavelength drift around 976 nm is stronger than that around 915 nm. For more efficient suppression of MI by shifting the pump wavelength, efficient absorption of pump power is required. The MI thresholds for fibers with different total pump absorptions and cladding diameters are compared. When the total pump absorption is increased, the gain saturation is enhanced, which results in the MI being mitigated more effectively and being more sensitive to pump wavelength drift. The MI threshold in gain fibers with larger inner cladding diameter is higher but more dependent upon pump wavelength. The results of this work can help in optimizing the pump wavelength and fiber parameters and suppressing MI in high-power fiber lasers.

Short communication: Repeatability of differential goat bulk milk culture and associations with somatic cell count, total bacterial count, and standard plate count.

PubMed

Koop, G; Dik, N; Nielen, M; Lipman, L J A

2010-06-01

The aims of this study were to assess how different bacterial groups in bulk milk are related to bulk milk somatic cell count (SCC), bulk milk total bacterial count (TBC), and bulk milk standard plate count (SPC) and to measure the repeatability of bulk milk culturing. On 53 Dutch dairy goat farms, 3 bulk milk samples were collected at intervals of 2 wk. The samples were cultured for SPC, coliform count, and staphylococcal count and for the presence of Staphylococcus aureus. Furthermore, SCC (Fossomatic 5000, Foss, Hillerød, Denmark) and TBC (BactoScan FC 150, Foss) were measured. Staphylococcal count was correlated to SCC (r=0.40), TBC (r=0.51), and SPC (r=0.53). Coliform count was correlated to TBC (r=0.33), but not to any of the other variables. Staphylococcus aureus did not correlate to SCC. The contribution of the staphylococcal count to the SPC was 31%, whereas the coliform count comprised only 1% of the SPC. The agreement of the repeated measurements was low. This study indicates that staphylococci in goat bulk milk are related to SCC and make a significant contribution to SPC. Because of the high variation in bacterial counts, repeated sampling is necessary to draw valid conclusions from bulk milk culturing. 2010 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Intake of bean fiber, beans, and grains and reduced risk of hormone receptor-negative breast cancer: the San Francisco Bay Area Breast Cancer Study.

PubMed

Sangaramoorthy, Meera; Koo, Jocelyn; John, Esther M

2018-05-01

High dietary fiber intake has been associated with reduced breast cancer risk, but few studies considered tumor subtypes defined by estrogen receptor (ER) and progesterone receptor (PR) status or included racial/ethnic minority populations who vary in their fiber intake. We analyzed food frequency data from a population-based case-control study, including 2135 breast cancer cases (1070 Hispanics, 493 African Americans, and 572 non-Hispanic Whites (NHWs)) and 2571 controls (1391 Hispanics, 557 African Americans, and 623 NHWs). Odds ratios (OR) and 95% confidence intervals (CI) for breast cancer associated with fiber intake were calculated using unconditional logistic regression. Breast cancer risk associated with high intake (high vs. low quartile) of bean fiber (p-trend = 0.01), total beans (p-trend = 0.03), or total grains (p-trend = 0.05) was reduced by 20%. Inverse associations were strongest for ER-PR- breast cancer, with risk reductions associated with high intake ranging from 28 to 36%. For bean fiber, risk was reduced among foreign-born Hispanics only, who had the highest fiber intake, whereas for grain intake, inverse associations were found among NHWs only. There was no evidence of association with fiber intake from vegetables and fruits or total intake of vegetables and fruits. A high dietary intake of bean fiber and fiber-rich foods such as beans and grains may lower the risk of ER-PR- breast cancer, an aggressive breast cancer subtype for which few risk factors have been identified. © 2018 The Authors. Cancer Medicine published by John Wiley & Sons Ltd.

Dietary fiber is associated with circulating concentrations of C-reactive protein in breast cancer survivors: the HEAL study

PubMed Central

Villaseñor, Adriana; Ambs, Anita; Ballard-Barbash, Rachel; Baumgartner, Kathy B.; McTiernan, Anne; Ulrich, Cornelia M.; Neuhouser, Marian L.

2013-01-01

Inflammation is a suspected risk factor for breast cancer and its subsequent prognosis. The extent to which dietary and lifestyle factors might influence inflammation is important to examine. Specifically, dietary fiber may reduce systemic inflammation, but this relationship has not been examined among breast cancer survivors. We examined associations between dietary fiber and serum concentrations of C-reactive protein (CRP) and serum amyloid-A (SAA), among 698 female breast cancer survivors from the Health, Eating, Activity, and Lifestyle (HEAL) Study. Data are from interviews and clinical visits conducted 24 months post-study enrollment. Multivariate-adjusted linear regression estimated associations of total, soluble and insoluble fiber with serum concentrations of CRP and SAA. Logistic regression estimated the odds of elevated CRP (defined as >3.0 mg/L) across tertiles of dietary fiber intake. Mean total dietary fiber intake was 13.9 ± 6.4 g/day. Mean CRP and SAA were 3.32 ± 3.66 mg/L and 7.73 ± 10.23 mg/L, respectively. We observed a multivariate-adjusted inverse association between total dietary fiber intake and CRP concentrations (β, −0.029; 95% CI, −0.049, −0.008). Results for insoluble fiber were similar (β, −0.039; 95% CI, −0.064, −0.013). Among survivors who consumed >15.5 g/day of insoluble dietary fiber, a 49% reduction in the likelihood of having elevated CRP concentrations (OR, 0.51; 95% CI, 0.27, 0.95) was observed compared to those who consumed <5.4 g/day (p = 0.053). Our results suggest that diets high in fiber may benefit breast cancer survivors via reductions in systemic inflammation; elevated inflammation may be prognostic for reduced survival. PMID:21455669

Dietary Fiber Intake and Metabolic Syndrome Risk Factors among Young South African Adults

PubMed Central

Parker, Whadi-ah; Monyeki, Kotsedi D.

2018-01-01

This study attempts to bridge the research gap regarding the importance of dietary fiber in reducing metabolic syndrome (MetS) risk factors in young rural South Africans. A total of 627 individuals (309 males and 318 females) aged 18–30 years participated in the study. Dietary intake was measured using a validated 24-h recall method. The consumption of different types of dietary fiber (total, soluble, and insoluble) was calculated and presented as grams. Anthropometrics, blood pressure, fasting blood glucose, and lipid profiles were measured according to standard protocols. According to the definition of the International Diabetes Federation (IDF), the prevalence of MetS was 23.1%. Overall, the total median [interquartile range (IQR)] values for total, insoluble, and soluble fiber consumed were 4.6 g [0.0–48.9], 0.0 g [0.0–18.0], and 0.0 g [0.0–15.0], respectively. Females had a higher median [IQR] intake of total (5.1 g [0.0–48.9] vs. 4.3 g [0.0–43.9]), insoluble (0.0 g [0.0–18.0] vs. 0.0 g [0.0–12.0]), and soluble fiber (0.0 g [0.0–14.9] vs. 0.0 g [0.0–7.3]) than males, respectively. The mean values for waist circumference, fasting blood glucose, and total cholesterol were higher in females than males (82.20 cm vs. 75.07 cm; 5.59 mmol/L vs. 5.44 mmol/L; and 4.26 mmol/L vs. 4.03 mmol/L, respectively), with significant differences observed for waist circumference and total cholesterol (p < 0.001 and p = 0.005, respectively). More than 97% of participants had fiber intakes below the recommended levels. After adjusting for all potential confounders (age, gender, and energy), log total fiber was inversely associated with fasting blood glucose (β = −0.019, 95% CI [−0.042 to 0.003], p < 0.05), systolic blood pressure (β = −0.002, 95% CI [−0.050 to 0.002], p < 0.05) and high-density lipoprotein cholesterol (β = −0.085, 95% CI [−0.173 to 0.002], p = 0.051) This study may be of public health relevance, providing a potential link between less dietary fiber intake and fasting blood glucose (FBG) and both systolic and diastolic blood pressure. Therefore, this observational data encourages public health policy measures to increase the consumption of dietary fiber in rural communities in order to lower the burden of MetS and its associated risk factors. PMID:29670048

Symptoms Associated with Dietary Fiber Supplementation over Time in Individuals with Fecal Incontinence

PubMed Central

Bliss, Donna Z.; Savik, Kay; Jung, Hans-Joachim G.; Whitebird, Robin; Lowry, Ann

2011-01-01

Background Knowledge about adverse symptoms over time from fiber supplementation is lacking. Purpose To compare the severity of adverse gastrointestinal (GI) symptoms during supplementation with dietary fiber or placebo over time in adults with fecal incontinence. Secondary aims were to determine the relationship between symptom severity and emotional upset and their association with study attrition and reducing fiber dose. Methods Subjects (N=189, 77% female, 92% white, (age = 58 years, SD = 14) with fecal incontinence were randomly assigned to placebo or a supplement of 16g total dietary fiber/day from one of three sources: gum arabic, psyllium, or carboxymethylcellulose. They reported GI symptoms daily during baseline (14 days), incremental fiber dosing (6 days), and two segments of steady full fiber dose (32 days total). Results Severity of symptoms in all groups was minimal. Adjusting for study segment and day, a greater feeling of fullness in the psyllium group was the only symptom that differed from symptoms in the placebo group. Odds of having greater severity of flatus, belching, fullness, and bloating were 1.2–2.0 times greater in the steady dose segment compared to baseline. There was a positive association between symptom severity and emotional upset. Subjects with a greater feeling of fullness or bloating or higher scores for total symptom severity or emotional upset were more likely to withdraw from the study sooner or reduce fiber dose. Conclusions Persons with fecal incontinence experience a variety of GI symptoms over time. Symptom severity and emotional upset appear to influence fiber tolerance and study attrition. Supplements seemed well tolerated. PMID:21543963

Fibrous filter efficiency and pressure drop in the viscous-inertial transition flow regime.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sanchez, Andres L.; Brockmann, John E.; Dellinger, Jennifer Gwynne

2011-10-01

Fibrous filter pressure drop and aerosol collection efficiency were measured at low air pressures (0.2 to 0.8 atm) and high face velocities (5 to 20 meters per second) to give fiber Reynolds numbers in the viscous-inertial transition flow regime (1 to 16). In this regime, contemporary filtration theory based on Kuwabara's viscous flow through an ensemble of fibers under-predicts single fiber impaction by several orders of magnitude. Streamline curvature increases substantially as inertial forces become dominant. Dimensionless pressure drop measurements followed the viscous-inertial theory of Robinson and Franklin rather than Darcy's linear pressure-velocity relationship (1972). Sodium chloride and iron nano-agglomeratemore » test aerosols were used to evaluate the effects of particle density and shape factor. Total filter efficiency collapsed when plotted against the particle Stokes and fiber Reynolds numbers. Efficiencies were then fitted with an impactor type equation where the cutpoint Stokes number and a steepness parameter described data well in the sharply increasing portion of the curve (20% to 80% efficiency). The cutpoint Stokes number was a linearly decreasing function of fiber Reynolds number. Single fiber efficiencies were calculated from total filter efficiencies and compared to contemporary viscous flow impaction theory (Stechkina et al. 1969), and numerical simulations from the literature. Existing theories under-predicted measured single fiber efficiencies although the assumption of uniform flow conditions for each successive layer of fibers is questionable; the common exponential relationship between single fiber efficiency and total filter efficiency may not be appropriate in this regime.« less

Comparing milled fiber, Quebec ore, and textile factory dust: has another piece of the asbestos puzzle fallen into place?

PubMed

Berman, D Wayne

2010-01-01

Results of a meta-analysis indicate that the variation in potency factors observed across published epidemiology studies can be substantially reconciled (especially for mesothelioma) by considering the effects of fiber size and mineral type, but that better characterization of historical exposures is needed before improved exposure metrics potentially capable of fully reconciling the disparate potency factors can be evaluated. Therefore, an approach for better characterizing historical exposures, the Modified Elutriator Method (MEM), was evaluated to determine the degree that dusts elutriated using this method adequately mimic dusts generated by processing in a factory. To evaluate this approach, elutriated dusts from Grade 3 milled fiber (the predominant feedstock used at a South Carolina [SC] textile factory) were compared to factory dust collected at the same facility. Elutriated dusts from chrysotile ore were also compared to dusts collected in Quebec mines and mills. Results indicate that despite the substantial variation within each sample set, elutriated dusts from Grade 3 fiber compare favorably to textile dusts and elutriated ore dusts compare to dusts from mines and mills. Given this performance, the MEM was also applied to address the disparity in lung cancer mortality per unit of exposure observed, respectively, among chrysotile miners/millers in Quebec and SC textile workers. Thus, dusts generated by elutriation of stockpiled chrysotile ore (representing mine exposures) and Grade 3 milled fiber (representing textile exposures) were compared. Results indicate that dusts from each sample differ from one another. Despite such variation, however, the dusts are distinct and fibers in Grade 3 dusts are significantly longer than fibers in ore dusts. Moreover, phase-contrast microscopy (PCM) structures in Grade 3 dusts are 100% asbestos and counts of PCM-sized structures are identical, whether viewed by PCM or transmission electron microscope (TEM). In contrast, a third of PCM structures in ore dusts are not asbestos and only a third that are counted by PCM are also counted by TEM. These distinctions also mirror the characteristics of the bulk materials themselves. Perhaps most important, when the differences in size distributions and PCM/TEM distinctions in these dusts are combined, the combined difference is sufficient to completely explain the difference in exposure/response observed between the textile worker and miner/miller cohorts. Importantly, however, evidence that such an explanation is valid can only be derived from a meta-analysis (risk assessment) covering a diverse range of epidemiology study environments, which is beyond the scope of the current study. The above findings suggest that elutriator-generated dusts mimic factory dusts with sufficient reliability to support comparisons between historical exposures experienced by the various cohorts studied by epidemiologists. A simulation was also conducted to evaluate the relative degree that the characteristics of dust are driven by the properties of the bulk material processed versus the nature of the mechanical forces applied. That results indicate it is the properties of bulk materials reinforces the theoretical basis justifying use of the elutriator to reconstruct historical exposures. Thus, the elutriator may be a valuable tool for reconstructing historical exposures suitable for supporting continued refinements of the risk models being developed to predict asbestos-related cancer risk.

Characterization of developmental immature fiber (im) mutant and Texas Marker-1 (TM-1) cotton fibers by Attenuated Total Reflection Fourier Transform Infrared (ATR FT-IR) spectroscopy

USDA-ARS?s Scientific Manuscript database

The immature fiber (im) mutant is one type of cotton fiber mutants with unique characteristics of non-fluffy cotton bolls. Compared to its near-isogenic wild type Texas Marker-1 (TM-1), im fiber has thin secondary cell wall and is less mature. In this work, we applied the previously proposed princip...

Large-scale fiber release and equipment exposure experiments. [aircraft fires

NASA Technical Reports Server (NTRS)

Pride, R. A.

1980-01-01

Outdoor tests were conducted to determine the amount of fiber released in a full scale fire and trace its dissemination away from the fire. Equipment vulnerability to fire released fibers was assessed through shock tests. The greatest fiber release was observed in the shock tube where the composite was burned with a continuous agitation to total consumption. The largest average fiber length obtained outdoors was 5 mm.

In vitro starch digestion and cake quality: impact of the ratio of soluble and insoluble dietary fiber.

PubMed

Oh, Im Kyung; Bae, In Young; Lee, Hyeon Gyu

2014-02-01

The influence of the ratio of soluble dietary fiber (SDF) and insoluble dietary fiber (IDF) on the in vitro starch digestion, predicted glycemic index (pGI), and the physicochemical properties of fiber-enriched cakes were evaluated. The hydration and pasting properties were affected by the ratio of SDF and IDF. According to the increase of IDF ratio (SDF ratio reduction) in 3 g fiber-enriched cakes, slowly digestible starch (SDS) contents increased, while the rapidly digestible starch (RDS) contents decreased. The pGI values were significantly different with control in 3 g fiber-enriched cake containing more than 50% IDF contents (p<0.05). But the pGI values of 6g fiber-enriched cake samples were not significantly different by SDF and IDF ratio. With the exception of the SDF 100% cake, volume index, hardness, and color values of the fiber-enriched cakes increased according to reductions in the SDF ratio. The cakes containing 3 g of total dietary fiber (the same ratio of SDF and IDF) per serving were shown to have low pGI and acceptable quality attributes. Specially, total dietary fiber amount and IDF ratio are more effective than SDF ratio to lower the pGI value. Copyright © 2013 Elsevier B.V. All rights reserved.

Growth of single-crystal YAG fiber optics.

PubMed

Nie, Craig D; Bera, Subhabrata; Harrington, James A

2016-07-11

Single-crystal YAG (Y₃Al₅O₁₂) fibers have been grown by the laser heated pedestal growth technique with losses as low as 0.3 dB/m at 1.06 μm. These YAG fibers are as long as about 60 cm with diameters around 330 μm. The early fibers were grown from unoriented YAG seed fibers and these fibers exhibited facet steps or ridges on the surface of the fiber. However, recently we have grown fibers using an oriented seed to grow step-free fibers. Scattering losses made on the fibers indicate that the scattering losses are equal to about 30% of the total loss.

NASALife-Component Fatigue and Creep Life Prediction Program and Illustrative Examples

NASA Technical Reports Server (NTRS)

Murthy, Pappu L. N.; Mital, Subodh K.; Gyekenyesi, John Z.

2005-01-01

NASALife is a life prediction program for propulsion system components made of ceramic matrix composites (CMC) under cyclic thermo-mechanical loading and creep rupture conditions. Although, the primary focus was for CMC components the underlying methodologies are equally applicable to other material systems as well. The program references data for low cycle fatigue (LCF), creep rupture, and static material properties as part of the life prediction process. Multiaxial stresses are accommodated by Von Mises based methods and a Walker model is used to address mean stress effects. Varying loads are reduced by the Rainflow counting method. Lastly, damage due to cyclic loading (Miner s rule) and creep are combined to determine the total damage per mission and the number of missions the component can survive before failure are calculated. Illustration of code usage is provided through example problem of a CMC turbine stator vane made of melt-infiltrated, silicon carbide fiber-reinforced, silicon carbide matrix composite (MI SiC/SiC)

Preimpoundment Water Quality of the Wild Rice River, Norman County, Minnesota.

DTIC Science & Technology

1980-06-01

cell counts at Twin Valley for 1977 water year 25 14. Plot of total phosphorus related to phytoplankton cell counts at Twin Valley ; 30 15. Plot...of total nitrogen related to phytoplankton cell counts at Twin Valley 31 16. Bar graph of diversity indices of phytoplankton genera, 1976, 1977...statistically signifi- cant beyond the 0.02 level. There is no apparent relation of BOD to stream- flow or to suspended-sediment, phytoplankton , and bacteria

A comparison of legionella and other bacteria concentrations in cooling tower water

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cappabianca, R.M.; Jurinski, N.B.; Jurinski, J.B.

1994-05-01

A field study was conducted in which water samples collected from air conditioning cooling water reservoirs of high-rise buildings throughout an urban area were assayed for Legionella and for total bacteria. Buildings included within the study had ongoing biocidal treatment programs for the cooling towers. Separate sample analyses were performed to measure the viable colony concentrations of total bacteria and of Legionella in the process waters. The occurrence and viable counts of Legionella in 304 environmental water samples were determined by inoculating them onto plates of buffered charcoal yeast extract (BCYE) agar medium (a presumptive screening method). The samples weremore » collected during summer months between July and September. BCYE plate cultures of 50 (16.4%) of the samples yielded Legionella with viable counts ranging from 2 to 608 colony forming units per milliliter. In the water samples, 281 (92.4%) yielded viable counts of bacteria that ranged from 9 to 1.2 x 10{sup 6} per milliliter. This study demonstrates that Legionella are commonly present in the water of air conditioning cooling towers and that there is no significant correlation between concurrently sampled culture plate counts of Legionella and total bacteria plate counts. Correspondingly, there is no demonstrated validity for use of total bacterial counts as an inferential surrogate for the concentration of Legionella in the water. 19 refs., 3 figs., 1 tab.« less

Lower white blood cell counts in elite athletes training for highly aerobic sports.

PubMed

Horn, P L; Pyne, D B; Hopkins, W G; Barnes, C J

2010-11-01

White cell counts at rest might be lower in athletes participating in selected endurance-type sports. Here, we analysed blood tests of elite athletes collected over a 10-year period. Reference ranges were established for 14 female and 14 male sports involving 3,679 samples from 937 females and 4,654 samples from 1,310 males. Total white blood cell counts and counts of neutrophils, lymphocytes and monocytes were quantified. Each sport was scaled (1-5) for its perceived metabolic stress (aerobic-anaerobic) and mechanical stress (concentric-eccentric) by 13 sports physiologists. Substantially lower total white cell and neutrophil counts were observed in aerobic sports of cycling and triathlon (~16% of test results below the normal reference range) compared with team or skill-based sports such as water polo, cricket and volleyball. Mechanical stress of sports had less effect on the distribution of cell counts. The lower white cell counts in athletes in aerobic sports probably represent an adaptive response, not underlying pathology.

Regional variation of white matter development in the cat brain revealed by ex vivo diffusion MR tractography.

PubMed

Dai, Guangping; Das, Avilash; Hayashi, Emiko; Chen, Qin; Takahashi, Emi

2016-11-01

Three-dimensional reconstruction of developing fiber pathways is essential to assessing the developmental course of fiber pathways in the whole brain. We applied diffusion spectrum imaging (DSI) tractography to five juvenile ex vivo cat brains at postnatal day (P) 35, when the degree of myelination varies across brain regions. We quantified diffusion properties (fractional anisotropy [FA] and apparent diffusion coefficient [ADC]) and other measurements (number, volume, and voxel count) on reconstructed pathways for projection (cortico-spinal and thalamo-cortical), corpus callosal, limbic (cingulum and fornix), and association (cortico-cortical) pathways, and characterized regional differences in maturation patterns by assessing diffusion properties. FA values were significantly higher in cortico-cortical pathways within the right hemisphere compared to those within the left hemisphere, while the other measurements for the cortico-cortical pathways within the hemisphere did not show asymmetry. ADC values were not asymmetric in both types of pathways. Interestingly, tract count and volume were significantly larger in the left thalamo-cortical pathways compared to the right thalamo-cortical pathways. The bilateral thalamo-cortical pathways showed high FA values compared to the other fiber pathways. On the other hand, ADC values did not show any differences across pathways studied. These results demonstrate that DSI tractography successfully depicted regional variations of white matter tracts during development when myelination is incomplete. Low FA and high ADC values in the cingulum bundle suggest that the cingulum bundle is less mature than the others at this developmental stage. Copyright © 2016 ISDN. Published by Elsevier Ltd. All rights reserved.

Tunneling Nanotubes are Novel Cellular Structures That Communicate Signals Between Trabecular Meshwork Cells.

PubMed

Keller, Kate E; Bradley, John M; Sun, Ying Ying; Yang, Yong-Feng; Acott, Ted S

2017-10-01

The actin cytoskeleton of trabecular meshwork (TM) cells plays a role in regulating aqueous humor outflow. Many studies have investigated stress fibers, but F-actin also assembles into other supramolecular structures including filopodia. Recently, specialized filopodia called tunneling nanotubes (TNTs) have been described, which communicate molecular signals and organelles directly between cells. Here, we investigate TNT formation by TM cells. Human TM cells were labeled separately with the fluorescent dyes, DiO and DiD, or with mitochondrial dye. Fixed or live TM cells were imaged using confocal microscopy. Image analysis software was used to track fluorescent vesicles and count the number and length of filopodia. The number of fluorescently labeled vesicles transferred between cells was counted in response to specific inhibitors of the actin cytoskeleton. Human TM tissue was stained with phalloidin. Live-cell confocal imaging of cultured TM cells showed transfer of fluorescently labeled vesicles and mitochondria via TNTs. In TM tissue, a long (160 μm) actin-rich cell process bridged an intertrabecular space and did not adhere to the substratum. Treatment of TM cells with CK-666, an Arp2/3 inhibitor, significantly decreased the number and length of filopodia, decreased transfer of fluorescently labeled vesicles and induced thick stress fibers compared to vehicle control. Conversely, inhibiting stress fibers using Y27632 increased transfer of vesicles and induced long cell processes. Identification of TNTs provides a means by which TM cells can directly communicate with each other over long distances. This may be particularly important to overcome limitations of diffusion-based signaling in the aqueous humor fluid environment.

Insertion of linear 8.4 μm diameter 16 channel carbon fiber electrode arrays for single unit recordings

PubMed Central

Patel, Paras R.; Na, Kyounghwan; Zhang, Huanan; Kozai, Takashi D. Y.; Kotov, Nicholas A.; Yoon, Euisik; Chestek, Cynthia A.

2016-01-01

Objective Single carbon fiber electrodes (d=8.4 μm) insulated with parylene-c and functionalized with PEDOT:pTS have been shown to record single unit activity but manual implantation of these devices with forceps can be difficult. Without an improvement in the insertion method any increase in the channel count by fabricating carbon fiber arrays would be impractical. In this study, we utilize a water soluble coating and structural backbones that allow us to create, implant, and record from fully functionalized arrays of carbon fibers with ~150 μm pitch. Approach Two approaches were tested for the insertion of carbon fiber arrays. The first method used a PEG coating that temporarily stiffened the fibers while leaving a small portion at the tip exposed. The small exposed portion (500 μm – 1 mm) readily penetrated the brain allowing for an insertion that did not require the handling of each fiber by forceps. The second method involved the fabrication of silicon support structures with individual shanks spaced 150 μm apart. Each shank consisted of a small groove that held an individual carbon fiber. Main results Our results showed that the PEG coating allowed for the chronic implantation of carbon fiber arrays in 5 rats with unit activity detected at 31 days post-implant. The silicon support structures recorded single unit activity in 3 acute rat surgeries. In one of those surgeries a stacked device with 3 layers of silicon support structures and carbon fibers was built and shown to readily insert into the brain with unit activity on select sites. Significance From these studies we have found that carbon fibers spaced at ~150 μm readily insert into the brain. This greatly increases the recording density of chronic neural probes and paves the way for even higher density devices that have a minimal scarring response. PMID:26035638

Development and testing of fiber-reinforced composite space maintainers.

PubMed

Kulkarni, Gajanan; Lau, Domenic; Hafezi, Sara

2009-01-01

The purpose of this study was to develop a clinically acceptable, cheaper, and more expedient alternative to standard stainless steel band and loop space maintainers. Loops of fiber-reinforced composites were constructed using polyethylene fiber (Ribbond) and glass fiber (Sticktech). The loops were bonded on extracted third molars and tested for flexural strength before and after thermocycling and following repair of the appliances after initial stress failure. Bacterial colonization on the appliances was also compared. Conventional stainless steel band and loop space maintainers cemented with Ketac were controls. Ribbond samples demonstrated higher flexural strength than Sticktech and the control (P<.05). No differences were noted among the other samples and the control. The repaired Ribbond samples were statistically comparable in flexural strength to the initial samples. Thermocycling resulted in decreased flexural strength of both Ribbond and Sticktech (P<.05). Thermocycled Ribbond samples were comparable to the control, but a lower flexural strength was noted for Sticktech samples (P<.05). While all space maintainers allowed some bacterial adhesion, Sticktech showed higher Streptococcus mutans counts than Ribbond (P=.06). Ribbond space-maintainers are comparable to the stainless steel in terms of physical strength and biofilm formation. The fiber-reinforced composite space maintainers may be a clinically acceptable and expedient alternative to the conventional band-loop appliance.

Effects of Whey, Soy or Leucine Supplementation with 12 Weeks of Resistance Training on Strength, Body Composition, and Skeletal Muscle and Adipose Tissue Histological Attributes in College-Aged Males

PubMed Central

Mobley, C. Brooks; Roberson, Paul A.; Mumford, Petey W.; Romero, Matthew A.; Kephart, Wesley C.; Anderson, Richard G.; Vann, Christopher G.; Osburn, Shelby C.; Pledge, Coree D.; Young, Kaelin C.; Goodlett, Michael D.; Pascoe, David D.; Lockwood, Christopher M.; Roberts, Michael D.

2017-01-01

We sought to determine the effects of L-leucine (LEU) or different protein supplements standardized to LEU (~3.0 g/serving) on changes in body composition, strength, and histological attributes in skeletal muscle and adipose tissue. Seventy-five untrained, college-aged males (mean ± standard error of the mean (SE); age = 21 ± 1 years, body mass = 79.2 ± 0.3 kg) were randomly assigned to an isocaloric, lipid-, and organoleptically-matched maltodextrin placebo (PLA, n = 15), LEU (n = 14), whey protein concentrate (WPC, n = 17), whey protein hydrolysate (WPH, n = 14), or soy protein concentrate (SPC, n = 15) group. Participants performed whole-body resistance training three days per week for 12 weeks while consuming supplements twice daily. Skeletal muscle and subcutaneous (SQ) fat biopsies were obtained at baseline (T1) and ~72 h following the last day of training (T39). Tissue samples were analyzed for changes in type I and II fiber cross sectional area (CSA), non-fiber specific satellite cell count, and SQ adipocyte CSA. On average, all supplement groups including PLA exhibited similar training volumes and experienced statistically similar increases in total body skeletal muscle mass determined by dual X-ray absorptiometry (+2.2 kg; time p = 0.024) and type I and II fiber CSA increases (+394 μm2 and +927 μm2; time p < 0.001 and 0.024, respectively). Notably, all groups reported increasing Calorie intakes ~600–800 kcal/day from T1 to T39 (time p < 0.001), and all groups consumed at least 1.1 g/kg/day of protein at T1 and 1.3 g/kg/day at T39. There was a training, but no supplementation, effect regarding the reduction in SQ adipocyte CSA (−210 μm2; time p = 0.001). Interestingly, satellite cell counts within the WPC (p < 0.05) and WPH (p < 0.05) groups were greater at T39 relative to T1. In summary, LEU or protein supplementation (standardized to LEU content) does not provide added benefit in increasing whole-body skeletal muscle mass or strength above PLA following 3 months of training in previously untrained college-aged males that increase Calorie intakes with resistance training and consume above the recommended daily intake of protein throughout training. However, whey protein supplementation increases skeletal muscle satellite cell number in this population, and this phenomena may promote more favorable training adaptations over more prolonged periods. PMID:28869573

Effects of Whey, Soy or Leucine Supplementation with 12 Weeks of Resistance Training on Strength, Body Composition, and Skeletal Muscle and Adipose Tissue Histological Attributes in College-Aged Males.

PubMed

Mobley, C Brooks; Haun, Cody T; Roberson, Paul A; Mumford, Petey W; Romero, Matthew A; Kephart, Wesley C; Anderson, Richard G; Vann, Christopher G; Osburn, Shelby C; Pledge, Coree D; Martin, Jeffrey S; Young, Kaelin C; Goodlett, Michael D; Pascoe, David D; Lockwood, Christopher M; Roberts, Michael D

2017-09-04

We sought to determine the effects of L-leucine (LEU) or different protein supplements standardized to LEU (~3.0 g/serving) on changes in body composition, strength, and histological attributes in skeletal muscle and adipose tissue. Seventy-five untrained, college-aged males (mean ± standard error of the mean (SE); age = 21 ± 1 years, body mass = 79.2 ± 0.3 kg) were randomly assigned to an isocaloric, lipid-, and organoleptically-matched maltodextrin placebo (PLA, n = 15), LEU ( n = 14), whey protein concentrate (WPC, n = 17), whey protein hydrolysate (WPH, n = 14), or soy protein concentrate (SPC, n = 15) group. Participants performed whole-body resistance training three days per week for 12 weeks while consuming supplements twice daily. Skeletal muscle and subcutaneous (SQ) fat biopsies were obtained at baseline (T1) and ~72 h following the last day of training (T39). Tissue samples were analyzed for changes in type I and II fiber cross sectional area (CSA), non-fiber specific satellite cell count, and SQ adipocyte CSA. On average, all supplement groups including PLA exhibited similar training volumes and experienced statistically similar increases in total body skeletal muscle mass determined by dual X-ray absorptiometry (+2.2 kg; time p = 0.024) and type I and II fiber CSA increases (+394 μm² and +927 μm²; time p < 0.001 and 0.024, respectively). Notably, all groups reported increasing Calorie intakes ~600-800 kcal/day from T1 to T39 (time p < 0.001), and all groups consumed at least 1.1 g/kg/day of protein at T1 and 1.3 g/kg/day at T39. There was a training, but no supplementation, effect regarding the reduction in SQ adipocyte CSA (-210 μm²; time p = 0.001). Interestingly, satellite cell counts within the WPC ( p < 0.05) and WPH ( p < 0.05) groups were greater at T39 relative to T1. In summary, LEU or protein supplementation (standardized to LEU content) does not provide added benefit in increasing whole-body skeletal muscle mass or strength above PLA following 3 months of training in previously untrained college-aged males that increase Calorie intakes with resistance training and consume above the recommended daily intake of protein throughout training. However, whey protein supplementation increases skeletal muscle satellite cell number in this population, and this phenomena may promote more favorable training adaptations over more prolonged periods.

Associations Between Nutritional Parameters and Clinicopathologic Factors in Patients with Gastric Cancer: A Comprehensive Study.

PubMed

Brewczyński, Adam; Jabłońska, Beata; Pawlicki, Krzysztof

2017-07-01

The aim of this study was to assess and analyze the nutritional status of gastric cancer (GC) patients. The analysis included 207 patients with GC treated in a large center of oncology. Patients were divided into two groups according to the cutoff value of the mean prognostic nutritional index (PNI): those with a PNI < 52.78 and those with a PNI ≥ 52.78. The higher PNI was associated with lower age and higher total protein and hemoglobin levels (P < 0.01). The total lymphocyte count (P = 0.02), albumin, total protein and PNI (P < 0.01) were significantly higher in stable-weight patients and lower in the group with weight loss > 10% (P = 0.000031). Body mass index (BMI) after disease recognition, albumin and total protein (0.003) levels, total lymphocyte count, and PNI were significantly lower in patients with nutritional risk. Significantly lower BMI before disease and BMI after disease recognition were noted in smoking patients. Significantly higher total lymphocyte count was observed in smoking patients (P < 0.01). Significantly lower PNI was noted in tumors with lymph node metastasis (N+). G3 tumors were associated with the lowest total lymphocyte count (P = 0.01). Assessment of nutritional status using PNI calculation should be the standard management of patients with GC before treatment.

Magnetic Snell's law and spin-wave fiber with Dzyaloshinskii-Moriya interaction

NASA Astrophysics Data System (ADS)

Yu, Weichao; Lan, Jin; Wu, Ruqian; Xiao, Jiang

2016-10-01

Spin waves are collective excitations propagating in the magnetic medium with ordered magnetizations. Magnonics, utilizing the spin wave (magnon) as an information carrier, is a promising candidate for low-dissipation computation and communication technologies. We discover that, due to the Dzyaloshinskii-Moriya interaction, the scattering behavior of the spin wave at a magnetic domain wall follows a generalized Snell's law, where two magnetic domains work as two different mediums. Similar to optical total reflection that occurs at water-air interfaces, spin waves may experience total reflection at the magnetic domain walls when their incident angle is larger than a critical value. We design a spin-wave fiber using a magnetic domain structure with two domain walls, and demonstrate that such a spin-wave fiber can transmit spin waves over long distances by total internal reflections, in analogy to an optical fiber.

STEFFY-software to calculate nuclide-specific total counting efficiency in well-type γ-ray detectors.

PubMed

Pommé, S

2012-09-01

A software package is presented to calculate the total counting efficiency for the decay of radionuclides in a well-type γ-ray detector. It is specifically applied to primary standardisation of activity by means of 4πγ-counting with a NaI(Tl) well-type scintillation detector. As an alternative to Monte Carlo simulations, the software combines good accuracy with superior speed and ease-of-use. It is also well suited to investigate uncertainties associated with the 4πγ-counting method for a variety of radionuclides and detector dimensions. In this paper, the underlying analytical models for the radioactive decay and subsequent counting efficiency of the emitted radiation in the detector are summarised. Copyright © 2012 Elsevier Ltd. All rights reserved.

BIOCHEMICAL COMPOSITION AND NUTRITIONAL EVALUATION OF BARLEY RIHANE (HORDEUM VULGARE L.)

PubMed Central

Lahouar, Lamia; Ghrairi, Fatma; El Arem, Amira; Medimagh, Sana; El Felah, Mouledi; Salem, Hichem Ben; Achour, Lotfi

2017-01-01

Background: Many experimental studies have suggested an important role for barley Rihane(BR)in the prevention of colon cancer and cardiovascular diseases. The objective of this study was to evaluate the physico-chemical properties and nutritional characterizations of BR compared to other varieties grown in Tunisia (Manel, Roho and Tej). Material and Methods: Total, insoluble and soluble dietary fiber(β-glucan), total protein, ash and some minerals of BR and Tunisian barley varieties were determined. Results: The results revealed that BR is good source of dietary fiber mainly β-glucan compared to the other varieties. This variety is a relatively rich source of phosphorous and potassium and it contains many important unsaturated fatty acids. BR has higher nutritional value than other varieties. Conclusion: Barley Rihane has significant nutritional characterizations compared to others Tunisian barleys varieties. Abbreviations: BR, Barley Rihane; LDL, low density lipoprotein; HDL, high density lipoprotein; AOM, azoxymethane; TBV, Tunisian barley varieties; TGW, thousand grain weight; SW, weight specific; TDF, total dietary fiber; IDF, insoluble dietary fiber; SDF, soluble dietary fiber; DM, Dry Matter. PMID:28480409

Advanced Wavefront Sensor Concepts.

DTIC Science & Technology

1981-01-01

internal optics (a) Characteristics (see Figure 47) - Intensification with a 256 element linear self scanned diode array - Optical input; lenticular ...34 diameter - Lenticular array input to fiber optics which spread out to tubes - Photon counting for low noise fac- tor (b) Pe r fo rmance - Bialkali...problem in making the lenslet arrays in the pupil divider rectangular. The last optical elements are the lenticular lens arrays. In this group, the first

The effect of He-Ne and Ga-Al-As lasers on the healing of oral mucosa in diabetic mice.

PubMed

Fahimipour, Farahnaz; Houshmand, Behzad; Alemi, Parvin; Asnaashari, Mohammad; Tafti, Mahmoud Akhavan; Akhoundikharanagh, Fatemeh; Farashah, Seyed Emadeddin Najafi; Aminisharifabad, Mohammad; Korani, Aghdas Setoudehnia; Mahdian, Mina; Bastami, Farshid; Tahriri, Mohammadreza

2016-06-01

Delayed wound healing is one of the complications of diabetes mellitus. Low-level laser therapy (LLLT) has been used to accelerate wound healing however the effect of LLLT on the hard palate wound healing in streptozotocin-induced diabetic (STZ-D) mice has not yet been characterized. This study aims to determine the effect of LLLT (He-Ne and Ga-Al-As laser) on the process of wound healing in the hard palate among diabetic and non-diabetic mice. 90 adult male mice were divided into six groups. Type 1 diabetes mellitus was induced in three groups by means of injection of STZ. Of these, one group was irradiated with He-Ne laser (DH group), one with Ga-Al-As laser (DG group) and one did not undergo any LLLT (DC group). The remaining groups were non-diabetic which were allotted to laser therapy with He-Ne laser (NH group) or with Ga-Al-As laser (NG group) or no LLLT (NC group). Five animals from each group were killed on the third, seventh, and fourteenth days after surgery, and biopsies were made for histological analysis. On the 3rd and 7th days after the surgery, the number of polymorphonuclear (PMN) cells in NH, DH, NG, and DG groups was significantly lower than that of the control groups. On the 3rd, 7th and 14th days, the fibroblasts and new blood vessel counts and collagen fibers in diabetic laser treated groups (DG and DH) were significantly higher compared to that of NC, DC, NH and NG groups. On the 7th and 14th days, the fibroblasts and new blood vessel counts and collagen fibers in NH, DH, NG, and DG groups were also significantly higher than that of the control groups, and the fibroblast and new blood vessel counts and collagen density fibers in NH and DH groups were higher than that of the NG and DG groups. LLLT with He-Ne laser compared to Ga-Al-As laser has a positive healing effect on hard palate gingival wounds in STZ-D mice. Copyright © 2016 Elsevier B.V. All rights reserved.

Comparison of fluorescence microscopy and solid-phase cytometry methods for counting bacteria in water

USGS Publications Warehouse

Lisle, John T.; Hamilton, Martin A.; Willse, Alan R.; McFeters, Gordon A.

2004-01-01

Total direct counts of bacterial abundance are central in assessing the biomass and bacteriological quality of water in ecological and industrial applications. Several factors have been identified that contribute to the variability in bacterial abundance counts when using fluorescent microscopy, the most significant of which is retaining an adequate number of cells per filter to ensure an acceptable level of statistical confidence in the resulting data. Previous studies that have assessed the components of total-direct-count methods that contribute to this variance have attempted to maintain a bacterial cell abundance value per filter of approximately 106 cells filter-1. In this study we have established the lower limit for the number of bacterial cells per filter at which the statistical reliability of the abundance estimate is no longer acceptable. Our results indicate that when the numbers of bacterial cells per filter were progressively reduced below 105, the microscopic methods increasingly overestimated the true bacterial abundance (range, 15.0 to 99.3%). The solid-phase cytometer only slightly overestimated the true bacterial abundances and was more consistent over the same range of bacterial abundances per filter (range, 8.9 to 12.5%). The solid-phase cytometer method for conducting total direct counts of bacteria was less biased and performed significantly better than any of the microscope methods. It was also found that microscopic count data from counting 5 fields on three separate filters were statistically equivalent to data from counting 20 fields on a single filter.

Analysis of structure of hyperfine poly(3-hydroxybutyrate) fibers (PHB) for controlled drug delivery

NASA Astrophysics Data System (ADS)

Olkhov, A. A.; Kosenko, R. Yu; Markin, V. S.; Zykova, A. K.; Pantyukhov, P. V.; Karpova, S. G.; Iordanskii, A. L.

2017-12-01

Hyperfine fibers based on biodegradable poly (3-hydroxybutyrate) with encapsulated drug substance (dipyridamol) were obtained by using electrospinning method. Addition of dipyridamol has a significant effect on geometrical shape and structure of microfibers as well as total porosity of fibrous material. Observation of fibers using scanning electron microscopy (SEM) method showed that without or at lower dipyridamol content (<3%) fibers consisted of interleaved ellipsoid and cylindrical fragments. At higher dipyridamol content (3-5%) anomalous ellipsoid structures did not practically form, and fiber’s shape became cylindrical. The totality of morphological and structural characteristics determined the rate of dipyridamol diffusive transports. The simplified model of drug desorption from fibrous matrix was presented. In current work it was showed that the rate-limiting stage of transport was the diffusion of dipyridamol in the bulk of cylindrical fibers.

Controlling Structure and Properties of High Surface Area Nonwoven Materials via Hydroentangling

NASA Astrophysics Data System (ADS)

Luzius, Dennis

Hydroentangling describes a technique using a series of high-velocity water jets to mechanically interlock and entangle fibers. Over the last decades researchers worked on a fundamental understanding of the process and the factors influencing the properties of the final nonwoven material. Recent studies discovered hydroentangling to be capable to create unique, knot-like structures characterized by high- and low density regions, which are believed to have interesting properties for filtration applications. However, just little is known about the impact of hydroentangling parameters on the properties of filtration media to this day. In this study we report on the effect of various hydroentangling parameters, such as jet spacing, manifold pressure, number of manifolds but also specific energy on the structure and properties of high surface area nonwoven materials. Latter was achieved by different bicomponent fiber technologies and subsequent treatments removing the sacrificial compound from the structure. The highest BET surface area was measured to be 3.5 m2 g-1 and the smallest mean fiber size about 0.5 mum. Hydroentangling with large jet spacing was found to be a parameter significantly enhancing the filtration properties of caustic-treated island-in-the-sea nonwoven materials. Moreover, improved capture efficiencies and reduced pressure drops were achieved by reducing the manifold pressure and therefore specific energy during hydroentangling. Jet spacing but not island count was found to be the dominant factor influencing the structure and properties of island-in-the-sea nonwovens. Contrary to our initial expectations increasing the island count and thus decreasing the fiber size did not result in better filtration properties. Mixed media nonwoven structures made from homocomponent and island-in-the-sea fibers were found to have lower densities, higher air permeabilities and better quality factors compared to island-in-the-sea structures hydroentangled under the exact same conditions. Study showed the specific energy to not be an adequate measure for describing the process-structure relationship in hydroentangling. Hydroentangling with same specific energy but different manifold pressures revealed the structure and properties to be different and the peak manifold pressure to be the dominant parameter. It was further shown that hydroentangling with multiple manifolds but same water pressure influences the structure and properties of mono- and bicomponent nonwoven materials. Hydroentangling with three manifolds having the same water pressure resulted in stronger, less permeable fabrics compared to two manifolds or one manifold with the same water pressure. Necessary hydroentangling intensity for winged and island-in-the-sea nonwoven materials was found to be different. Winged fiber nonwovens required higher manifold pressures and a different energy ratio than island-in-in-the-sea nonwovens. Hydroentangling winged fiber webs with jet spacing larger than 600 mum resulted in materials too weak to withstand the caustic-treatment. Study indicated the charging potential of winged fiber nonwovens to be superior compared to island-in-the-sea-structures. In contrast to winged fiber nonwovens, island-in-the-sea structures showed higher pressure drops after corona discharge. Loading winged fiber nonwovens with potassium chloride revealed caustic-treated, IPA discharged materials to show the highest loading capacity.

Evaluation of the impact of banking umbilical cord blood units with high cell dose for ethnically diverse patients.

PubMed

Stritesky, Gretta; Wadsworth, Kimberly; Duffy, Merry; Buck, Kelly; Dehn, Jason

2018-02-01

Umbilical cord blood units provide an important stem cell source for transplantation, particularly for patients of ethnic diversity who may not have suitably matched available, adult-unrelated donors. However, with the cost of cord blood unit acquisition from public banks significantly higher than that for adult-unrelated donors, attention is focused on decreasing cost yet still providing cord blood units to patients in need. Historical practices of banking units with low total nucleated cell counts, including units with approximately 90 × 10 7 total nucleated cells, indicates that most banked cord blood units have much lower total nucleated cell counts than are required for transplant. The objective of this study was to determine the impact on the ability to identify suitable cord blood units for transplantation if the minimum total nucleated cell count for banking were increased from 90 × 10 7 to 124 or 149 × 10 7 . We analyzed ethnically diverse patients (median age, 3 years) who underwent transplantation of a single cord blood unit in 2005 to 2016. A cord blood unit search was evaluated to identify units with equal or greater human leukocyte antigen matching and a greater total nucleated cell count than that of the transplanted cord blood unit (the replacement cord blood unit). If the minimum total nucleated cell count for banking increased to 124 or 149 × 10 7 , then from 75 to 80% of patients would still have at least 1 replacement cord blood unit in the current (2016) cord blood unit inventory. The best replacement cord blood units were often found among cords with the same ethnic background as the patient. The current data suggest that, if the minimum total nucleated cell count were increased for banking, then it would likely lead to an inventory of more desirable cord blood units while having minimal impact on the identification of suitable cord blood units for transplantation. © 2017 AABB.

Effects of varying dietary ratios of corn silage to alfalfa silage on digestion of neutral detergent fiber in lactating dairy cows.

PubMed

Lopes, F; Cook, D E; Combs, D K

2015-09-01

An in vivo study was performed to test an in vitro procedure and model that predicts total-tract neutral detergent fiber (NDF) digestibility for lactating dairy cattle. Corn silage (CS) and alfalfa silage (AS) were used as forages for this study. These forages had similar NDF composition, but fiber in the CS contained less indigestible NDF compared with AS (35.5 and 47.8% of indigestible NDF, respectively). The in vitro method estimated rate of digestion of alfalfa potentially digestible NDF to be approximately 2 times faster than CS fiber (6.11 and 3.21%/h, respectively). Four diets were formulated containing different proportions of CS to AS: 100CS:0AS, 67CS:33AS, 33CS:67AS, and 0CS:100AS, as percentage of diet DM basis. The objective was to construct diets that contained approximately similar levels of NDF but with different pool sizes and rates of digestion of potentially digestible NDF. Diets were fed to 8 ruminally cannulated, multiparous, lactating dairy cows in a replicated 4×4 Latin square with 21-d periods. Total-tract fiber digestibility and fiber digestion kinetic parameters observed in vivo were compared with the values predicted by the in vitro assay and model. Total-tract NDF digestibility coefficients were similar (41.8 and 40.6% of total NDF) for the in vitro and in vivo methods, respectively. As the proportion of dietary alfalfa increased, the digestibility of NDF increased. The rate of digestion of potentially digestible NDF predicted from the in vitro assay was also similar to what was observed in vivo. Results suggest that the in vitro total-tract NDF digestibility model could be used to predict rate of fiber digestion and NDF digestibility for lactating dairy cattle. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

High-Fiber Orange Juice as a Nutrition Supplement in Women: A Randomized, Double-Blind, Placebo-Controlled Study of Tolerance and Effectiveness.

PubMed

Bergamasco, Christiane; Horie, Lilian Mika; Torrinhas, Raquel Susana; Waitzberg, Dan L

2015-11-01

The daily consumption of dietary fiber is frequently below suggested recommendations. Using a double-blind, controlled, randomized study, we assessed the efficiency and tolerance of a fiber-enriched orange juice to supplement fiber intake in women. After 1 week of noninterventional observation, 192 healthy adult women ingested 400 mL of orange juice for 21 days, which either was not (placebo group) or was enriched with fiber (fiber group). Orange juice ingestion was registered daily and controlled for each week during the study period. Macronutrient, fiber, and energy intake were determined using a 3-day food record, validated food chemical composition databases, and the "Pro Diet" software. Gastrointestinal symptoms were self-evaluated daily by scoring 4 grades of symptom intensity and using a visual analog scale to grade pain severity. No changes were observed for macronutrient and energy ingestion. For the placebo group (n = 97), the total fiber intake record was under the daily recommended value. In contrast, the fiber group (n = 95) displayed higher comparative values of total and soluble fiber consumption (P ≤ .001), achieving the daily recommended values of fiber intake. Both groups reported an increased frequency of slight bloating and rumbles over time (P ≤ .05). The fiber group also experienced a higher frequency of slight flatulence over time (P = .002). Consumption of fiber-enriched orange juice was efficient to achieve the daily fiber intake recommendation for women, was not accompanied by intense adverse events, and may represent a suitable method to supplement fiber intake in woman. © 2014 American Society for Parenteral and Enteral Nutrition.

Impact of dietary fiber and physical form on performance of lactating dairy cows.

PubMed

Woodford, J A; Jorgensen, N A; Barrington, G P

1986-04-01

Two trials were conducted to study the effects of forage intake and physical form on lactating cow performance. In trial 1, four cows in a 4 X 4 Latin square were fed long alfalfa hay at 28, 36, 45, and 53% of total dry matter plus concentrate. Total dry matter intake was not affected by forage percent. Total chewing time and milk fat percentage increased linearly with increasing forage consumption. Maximum 4% fat-corrected milk production occurred when diets contained 27% neutral detergent fiber and 18% acid detergent fiber. In trial 2, four cows in a 4 X 4 Latin square were fed diets of chopped alfalfa hay and concentrate in proportions to supply 27.4% total ration neutral detergent fiber. Mean particle length measured with an oscillating screen particle separator of the chopped hay was .26, .46, .64, and .90 cm. Total dry matter and forage dry matter intakes and total chewing were not influenced by forage mean particle length. Mean particle length did not affect actual milk or 4% fat-corrected milk production. Depression of milk fat percentage was prevented when forage mean particle length was greater than or equal .64 cm. Apparent digestibility of dietary constituents and rate of passage of hay and concentrate was not influenced by forage intake or physical form.

Partial replacement of alfalfa fiber with fiber from ground corn cobs or wheat middlings.

PubMed

Depies, K K; Armentano, L E

1995-06-01

This trial examined the effect of using corn cobs or wheat middlings to replace alfalfa partially as the dietary fiber source for lactating cows. Multiparous midlactation cows were used in three 4 x 4 Latin squares with 21-d periods. A low fiber, basal diet contained 26.8 g of total NDF, including 14.7 g of alfalfa NDF/100 g of dietary DM. Dietary fiber was increased by addition of more alfalfa, corn cobs, or wheat middlings to obtain 27.4, 28.9, and 27.9%, respectively, of total dietary NDF. Intake (24.9 kg of DM/d) and milk yield (31.6 kg/d) were not different among treatments. Nonforage fiber sources raised milk fat concentration above basal amounts (3.1% to 3.4% fat) and decreased ruminating time below that of the high alfalfa diet (423 to 390 min/d). Fat test was raised approximately one-half as much per unit of NDF from these nonforage feeds as it was per unit of NDF from alfalfa. When additional dietary fiber came from nonforage sources, milk protein concentration (3.3%) was greater than when alfalfa provided the added fiber (3.2%).

Dietary Sources of Fiber Intake and Its Association with Socio-Economic Factors among Flemish Preschool Children

PubMed Central

Lin, Yi; Bolca, Selin; Vandevijvere, Stefanie; De Keyzer, Willem; Van Oyen, Herman; Van Camp, John; De Backer, Guy; De Henauw, Stefaan; Huybrechts, Inge

2011-01-01

The objectives were to assess total dietary fiber intake, identify the major sources of dietary fiber, and examine its association with socio-economic factors among Flemish preschoolers. Three-day estimated dietary records were collected from a representative sample of preschoolers 2.5–6.5 years old (n = 661; 338 boys, 323 girls). The mean dietary fiber intake (13.4 g/d) was lower than the intake level recommended by the Belgian Superior Health Council (70% boys and 81% girls below the guidelines). The most important contributor was the group of bread and cereals (29.5%), followed by fruits (17.8%), potatoes and grains (16.0%), energy-dense, low-nutritious foods (12.4%), and vegetables (11.8%). Multiple linear regression analyses showed that total fiber intake was associated with maternal education and parents’ employment. Overall, fiber intakes from high-nutritious foods (vegetables and fruits) were higher in preschoolers of higher educated mothers and those with one or both parents being employed. In conclusion, the majority of the preschoolers had dietary fiber intakes below the recommended level. Hence, dietary fiber should be promoted among parents of preschoolers and low socio-economic status families should be addressed in particular. PMID:21673925

Anatomical feasibility of vagus nerve esophageal branch transfer to the phrenic nerve☆

PubMed Central

Wang, Ce; Liu, Jun; Yuan, Wen; Zhou, Xuhui; Wang, Xinwei; Xu, Peng; Chen, Jian; Wu, Guoxin; Shi, Sheng

2012-01-01

This study measured the vagus and phrenic nerves from 12 adult cadavers. We found that the width and thickness of the vagus and phrenic nerves were different in the chest. The distance from the point of the vagus nerve and phrenic nerve on the plane of the inferior border of portal pulmonary arteries (T point) was approximately 7 cm to the diaphragm and was approximately 10 cm to the clavicle level. The number of motor fibers in the vagus nerves was 1 716 ± 362, and the number of nerve fibers was 4 473 ± 653. The number of motor fibers in the phrenic nerves ranged from 3 078 ± 684 to 4 794 ± 638, and the number of nerve fibers ranged from 3 437 ± 642 to 5 071 ± 723. No significant difference was found in the total number of nerve fibers. The results suggest that width, thickness, and total number of nerve fibers are similar between the vagus and phrenic nerves, but the number of motor fibers is different between them. PMID:25745467

Associations between dietary fiber and inflammation, hepatic function, and risk of type 2 diabetes in older men: potential mechanisms for the benefits of fiber on diabetes risk.

PubMed

Wannamethee, S Goya; Whincup, Peter H; Thomas, Mary C; Sattar, Naveed

2009-10-01

To examine the relationship between dietary fiber and the risk of type 2 diabetes in older men and the role of hepatic and inflammatory markers. The study was performed prospectively and included 3,428 nondiabetic men (age 60-79 years) followed up for 7 years, during which there were 162 incident cases of type 2 diabetes. Low total dietary fiber (lowest quartile < or =20 g/day) was associated with increased risk of diabetes after adjustment for total calorie intake and potential confounders (relative risk -1.47 [95% CI 1.03-2.11]). This increased risk was seen separately for both low cereal and low vegetable fiber intake. Dietary fiber was inversely associated with inflammatory markers (C-reactive protein, interleukin-6) and with tissue plasminogen activator and gamma-glutamyl transferase. Adjustment for these markers attenuated the increased risk (1.28 [0.88-1.86]). Dietary fiber is associated with reduced diabetes risk, which may be partly explained by inflammatory markers and hepatic fat deposition.

Association Between Dietary Fiber Intake and Bone Loss in the Framingham Offspring Study.

PubMed

Dai, Zhaoli; Zhang, Yuqing; Lu, Na; Felson, David T; Kiel, Douglas P; Sahni, Shivani

2018-02-01

Dietary fiber may increase calcium absorption, but its role in bone mineralization is unclear. Furthermore, the health effect of dietary fiber may be different between sexes. We examined the association between dietary fiber (total fiber and fiber from cereal, fruits, vegetables, nuts, and legumes) and bone loss at the femoral neck, trochanter, and lumbar spine (L 2 to L 4 ) in older men and women. In the Framingham Offspring Study, at baseline (1996-2001), diet was assessed using the Willett food-frequency questionnaire, and bone mineral density (BMD) was measured using dual-energy X-ray absorptiometry. Follow-up BMD was measured in 2001-2005 and 2005-2008 among 792 men (mean age 58.1 years; BMI 28.6 kg/m 2 ) and 1065 women (mean age 57.3 years; BMI 27.2 kg/m 2 ). We used sex-specific generalized estimating equations in multivariable regressions to estimate the difference (β) of annualized BMD change in percent (%ΔBMD) at each skeletal site per 5 g/d increase in dietary fiber. We further estimated the adjusted mean for bone loss (annualized %ΔBMD) among participants in each higher quartile (Q2, Q3, or Q4) compared with those in the lowest quartile (Q1) of fiber intake. Higher dietary total fiber (β = 0.06, p = 0.003) and fruit fiber (β = 0.10, p = 0.008) was protective against bone loss at the femoral neck in men but not in women. When examined in quartiles, men in Q2-Q4 of total fiber had significantly less bone loss at the femoral neck versus those in Q1 (all p < 0.04). For women, we did not observe associations with hip bone loss, although fiber from vegetables appeared to be protective against spine bone loss in women but not men. There were no associations with cereal fiber or nut and legume fiber and bone loss in men or women. Our findings suggest that higher dietary fiber may modestly reduce bone loss in men at the hip. © 2017 American Society for Bone and Mineral Research. © 2017 American Society for Bone and Mineral Research.

Effect of different fibers on dough properties and biscuit quality.

PubMed

Blanco Canalis, María S; Steffolani, María E; León, Alberto E; Ribotta, Pablo D

2017-03-01

This study forms part of a broader project aimed at understanding the role of fibers from different sources in high-fat, high-sugar biscuits and at selecting the best fibers for biscuit quality. The main purpose of this work was to understand the rheological and structural properties involved in fiber-enriched biscuit dough. High-amylose corn starch (RSII), chemically modified starch (RSIV), oat fiber (OF) and inulin (IN) were used at two different levels of incorporation (6 and 12 g) in dough formulation. The influence of fiber on the properties of biscuit dough was studied via dynamic rheological tests, confocal microscopy and spreading behavior. Biscuit quality was assessed by width/thickness factor, texture and surface characteristics, total dietary fiber and sensory evaluation. Main results indicated that IN incorporation increased the capacity of dough spreading during baking and thus improved biscuit quality. OF reduced dough spreading during baking and strongly increased its resistance to deformation. RSII and RSIV slightly affected the quality of the biscuits. Sensory evaluation revealed that the panel liked IN-incorporated biscuits as much as control biscuits. The increase in total dietary fiber modified dough behavior and biscuit properties, and the extent of these effects depended on the type of fiber incorporated. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

The MaNGA integral field unit fiber feed system for the Sloan 2.5 m telescope

DOE Office of Scientific and Technical Information (OSTI.GOV)

Drory, N.; MacDonald, N.; Byler, N.

2015-02-01

We describe the design, manufacture, and performance of bare-fiber integral field units (IFUs) for the SDSS-IV survey Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) on the the Sloan 2.5 m telescope at Apache Point Observatory. MaNGA is a luminosity-selected integral-field spectroscopic survey of 10{sup 4} local galaxies covering 360–1030 nm at R∼2200. The IFUs have hexagonal dense packing of fibers with packing regularity of 3 μm (rms), and throughput of 96 ± 0.5% from 350 nm to 1 μm in the lab. Their sizes range from 19 to 127 fibers (3–7 hexagonal layers) using Polymicro FBP 120:132:150 μm core:clad:buffermore » fibers to reach a fill fraction of 56%. High throughput (and low focal-ratio degradation (FRD)) is achieved by maintaining the fiber cladding and buffer intact, ensuring excellent surface polish, and applying a multi-layer anti-reflection (AR) coating of the input and output surfaces. In operations on-sky, the IFUs show only an additional 2.3% FRD-related variability in throughput despite repeated mechanical stressing during plate plugging (however other losses are present). The IFUs achieve on-sky throughput 5% above the single-fiber feeds used in SDSS-III/BOSS, attributable to equivalent performance compared to single fibers and additional gains from the AR coating. The manufacturing process is geared toward mass-production of high-multiplex systems. The low-stress process involves a precision ferrule with a hexagonal inner shape designed to lead inserted fibers to settle in a dense hexagonal pattern. The ferrule ID is tapered at progressively shallower angles toward its tip and the final 2 mm are straight and only a few microns larger than necessary to hold the desired number of fibers. Our IFU manufacturing process scales easily to accommodate other fiber sizes and can produce IFUs with substantially larger fiber counts. To assure quality, automated testing in a simple and inexpensive system enables complete characterization of throughput and fiber metrology. Future applications include larger IFUs, higher fill factors with stripped buffer, de-cladding, and lenslet coupling.« less

The MaNGA Integral Field Unit Fiber Feed System for the Sloan 2.5 m Telescope

NASA Astrophysics Data System (ADS)

Drory, N.; MacDonald, N.; Bershady, M. A.; Bundy, K.; Gunn, J.; Law, D. R.; Smith, M.; Stoll, R.; Tremonti, C. A.; Wake, D. A.; Yan, R.; Weijmans, A. M.; Byler, N.; Cherinka, B.; Cope, F.; Eigenbrot, A.; Harding, P.; Holder, D.; Huehnerhoff, J.; Jaehnig, K.; Jansen, T. C.; Klaene, M.; Paat, A. M.; Percival, J.; Sayres, C.

2015-02-01

We describe the design, manufacture, and performance of bare-fiber integral field units (IFUs) for the SDSS-IV survey Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) on the the Sloan 2.5 m telescope at Apache Point Observatory. MaNGA is a luminosity-selected integral-field spectroscopic survey of 104 local galaxies covering 360-1030 nm at R˜ 2200. The IFUs have hexagonal dense packing of fibers with packing regularity of 3 μm (rms), and throughput of 96 ± 0.5% from 350 nm to 1 μm in the lab. Their sizes range from 19 to 127 fibers (3-7 hexagonal layers) using Polymicro FBP 120:132:150 μm core:clad:buffer fibers to reach a fill fraction of 56%. High throughput (and low focal-ratio degradation (FRD)) is achieved by maintaining the fiber cladding and buffer intact, ensuring excellent surface polish, and applying a multi-layer anti-reflection (AR) coating of the input and output surfaces. In operations on-sky, the IFUs show only an additional 2.3% FRD-related variability in throughput despite repeated mechanical stressing during plate plugging (however other losses are present). The IFUs achieve on-sky throughput 5% above the single-fiber feeds used in SDSS-III/BOSS, attributable to equivalent performance compared to single fibers and additional gains from the AR coating. The manufacturing process is geared toward mass-production of high-multiplex systems. The low-stress process involves a precision ferrule with a hexagonal inner shape designed to lead inserted fibers to settle in a dense hexagonal pattern. The ferrule ID is tapered at progressively shallower angles toward its tip and the final 2 mm are straight and only a few microns larger than necessary to hold the desired number of fibers. Our IFU manufacturing process scales easily to accommodate other fiber sizes and can produce IFUs with substantially larger fiber counts. To assure quality, automated testing in a simple and inexpensive system enables complete characterization of throughput and fiber metrology. Future applications include larger IFUs, higher fill factors with stripped buffer, de-cladding, and lenslet coupling.

Effects of pre-germinated fenugreek seeds inclusion in low-fiber diets on post-weaned rabbits' health status, growth performances, carcass characteristics, and meat chemical composition.

PubMed

Mabrouki, Sabah; Chalghoumi, Raja; Abdouli, Hedi

2017-03-01

Newly weaned rabbits frequently suffer from digestive disorders particularly when fed low-fiber diets. Fenugreek seeds are rich in dietary fiber and would be suited to moderate such disorders. This study investigated the effect of pre-germinated fenugreek seeds (PGFS) on rabbits' health, digestibility, growth performance, and carcass parameters. Fourteen weaned rabbits were fed one of the following diets: (1) low fiber as negative control (NC), (2) low fiber containing 5% PGFS (F5), (3) low fiber containing 10% PGFS (F10), and (4) adequate fiber as positive control (PC). Each rabbit was reared in an individual cage for 7 weeks. Morbidity and sanitary risk indexes were not different (P > 0.05) between the four diets. Only 20% of the rabbits had a detectable caecal Escherichia Coli (E. coli) count (<10 5  cfu/g), and all rabbits did not show Eimeria oocysts in their feces. Compared to NC, PC gave a lower (P < 0.05) weight gain and a higher (P < 0.05) feed conversion ratio (FCR). It was associated with a lighter (P < 0.05) chilled carcass weight, and its meat had slightly more moisture and ether extract with less protein. Inclusion of PGFS decreased (P < 0.05) feed intake at the 10% level and, consequently, tended to improve FCR, while no effect was detected on carcass characteristics and meat composition. This study suggested that (1) the low-fiber diet was adequate for both health and growth aspects of post-weaned rabbits, and (2) the inclusion of PGFS was without consequence on rabbits' health status and growth performance.

Fair comparison of complexity between a multi-band CAP and DMT for data center interconnects.

PubMed

Wei, J L; Sanchez, C; Giacoumidis, E

2017-10-01

We present, to the best of our knowledge, the first known detailed analysis and fair comparison of complexity of a 56 Gb/s multi-band carrierless amplitude and phase (CAP) and discrete multi-tone (DMT) over 80 km dispersion compensation fiber-free single-mode fiber links based on intensity modulation and direct detection for data center interconnects. We show that the matched finite impulse response filters and inverse fast Fourier transform (IFFT)/FFT take the majority of the complexity of the multi-band CAP and DMT, respectively. The choice of the multi-band CAP sub-band count and the DMT IFFT/FFT size makes significant impact on the system complexity or performance, and trade-off must be considered.

Succinic acid production from acid hydrolysate of corn fiber by Actinobacillus succinogenes.

PubMed

Chen, Kequan; Jiang, Min; Wei, Ping; Yao, Jiaming; Wu, Hao

2010-01-01

Dilute acid hydrolysate of corn fiber was used as carbon source for the production of succinic acid by Actinobacillus succinogenes NJ113. The optimized hydrolysis conditions were obtained by orthogonal experiments. When corn fiber particles were of 20 mesh in size and treated with 1.0% sulfuric acid at 121 degrees C for 2 h, the total sugar yield could reach 63.3%. It was found that CaCO(3) neutralization combined with activated carbon adsorption was an effective method to remove fermentation inhibitors especially furfural that presented in the acid hydrolysate of corn fiber. Only 5.2% of the total sugar was lost, while 91.9% of furfural was removed. The yield of succinic acid was higher than 72.0% with the detoxified corn fiber hydrolysate as the carbon source in anaerobic bottles or 7.5 L fermentor cultures. It was proved that the corn fiber hydrolysate could be an alternative to glucose for the production of succinic acid by A. succinogenes NJ113.

A novel all-fiber optic flow cytometer technology for Point-of Care and Remote Environments

NASA Astrophysics Data System (ADS)

Mermut, Ozzy

Traditional flow cytometry designs tend to be bulky systems with a complex optical-fluidic sub-system and often require trained personnel for operation. This makes them difficult to readily translate to remote site testing applications. A new compact and portable fiber-optic flow cell (FOFC) technology has been developed at INO. We designed and engineered a specialty optical fiber through which a square hole is transversally bored by laser micromachining. A capillary is fitted into that hole to flow analyte within the fiber square cross-section for detection and counting. With demonstrated performance benchmarks potentially comparable to commercial flow cytometers, our FOFC provides several advantages compared to classic free-space con-figurations, e.g., sheathless flow, low cost, reduced number of optical components, no need for alignment (occurring in the fabrication process only), ease-of-use, miniaturization, portability, and robustness. This sheathless configuration, based on a fiber optic flow module, renders this cytometer amenable to space-grade microgravity environments. We present our recent results for an all-fiber approach to achieve a miniature FOFC to translate flow cytometry from bench to a portable, point-of-care device for deployment in remote settings. Our unique fiber approach provides the capability to illuminate a large surface with a uniform intensity distri-bution, independently of the initial shape originating from the light source, and without loss of optical power. The CVs and sensitivities are measured and compared to industry benchmarks. Finally, integration of LEDs enable several advantages in cost, compactness, and wavelength availability.

Synergism of Cattle and Bison Inoculum on Ruminal Fermentation and Select Bacterial Communities in an Artificial Rumen (Rusitec) Fed a Barley Straw Based Diet.

PubMed

Oss, Daniela B; Ribeiro, Gabriel O; Marcondes, Marcos I; Yang, WenZhu; Beauchemin, Karen A; Forster, Robert J; McAllister, Tim A

2016-01-01

This study evaluated the effect of increasing the proportion of bison relative to cattle inoculum on fermentation and microbial populations within an artificial rumen (Rusitec). The experiment was a completely randomized design with a factorial treatment structure (proportion cattle:bison inoculum; 0:100, 33:67, 67:33, and 100:0) replicated in two Rusitec apparatuses ( n = 8 fermenters). The experiment was 15 d with 8 d of adaptation and 7 d of sampling. Fermenters were fed a diet of 70:30 barley straw:concentrate (DM basis). True digestibility of DM was determined after 48 h of incubation from d 13 to 15, and daily ammonia (NH 3 ) and volatile fatty acid (VFA) production were measured on d 9-12. Protozoa counts were determined at d 9, 11, 13, and 15 and particle-associated bacteria (PAB) from d 13 to 15. Select bacterial populations in the PAB were measured using RT-qPCR. Fermenter was considered the experimental unit and day of sampling as a repeated measure. Increasing the proportion of bison inoculum resulted in a quadratic effect ( P < 0.05) on straw, concentrate and total true DM disappearance and on straw and total neutral detergent fiber (aNDF) disappearance, with greater disappearances observed with mixed inoculum. There were no effect of source or proportion of inoculum on ADF disappearance ( P > 0.05). Increasing bison inoculum linearly increased ( P < 0.05) concentrate aNDF disappearance, total and concentrate N disappearance as well as total daily VFA and acetate production. A positive quadratic response ( P < 0.05) was observed for daily NH 3 -N, propionate, butyrate, valerate, isovalerate and isobutyrate production, as well as the acetate:propionate ratio. Increasing the proportion of bison inoculum linearly increased ( P < 0.05) total protozoa numbers. No effects were observed on pH, total gas and methane production, microbial N synthesis, or copies of 16S rRNA associated with total bacteria, Selenomonas ruminantium or Prevotella bryantii . Increasing bison inoculum had a quadratic effect ( P < 0.05) on Fibrobacter succinogenes , and tended to linearly ( P < 0.10) increase Ruminococcus flavefaciens and decrease ( P < 0.05) Ruminococcus albus copy numbers. In conclusion, bison inoculum increased the degradation of feed protein and fiber. A mixture of cattle and bison rumen inoculum acted synergistically, increasing the DM and aNDF disappearance of barley straw.

Synergism of Cattle and Bison Inoculum on Ruminal Fermentation and Select Bacterial Communities in an Artificial Rumen (Rusitec) Fed a Barley Straw Based Diet

PubMed Central

Oss, Daniela B.; Ribeiro, Gabriel O.; Marcondes, Marcos I.; Yang, WenZhu; Beauchemin, Karen A.; Forster, Robert J.; McAllister, Tim A.

2016-01-01

This study evaluated the effect of increasing the proportion of bison relative to cattle inoculum on fermentation and microbial populations within an artificial rumen (Rusitec). The experiment was a completely randomized design with a factorial treatment structure (proportion cattle:bison inoculum; 0:100, 33:67, 67:33, and 100:0) replicated in two Rusitec apparatuses (n = 8 fermenters). The experiment was 15 d with 8 d of adaptation and 7 d of sampling. Fermenters were fed a diet of 70:30 barley straw:concentrate (DM basis). True digestibility of DM was determined after 48 h of incubation from d 13 to 15, and daily ammonia (NH3) and volatile fatty acid (VFA) production were measured on d 9–12. Protozoa counts were determined at d 9, 11, 13, and 15 and particle-associated bacteria (PAB) from d 13 to 15. Select bacterial populations in the PAB were measured using RT-qPCR. Fermenter was considered the experimental unit and day of sampling as a repeated measure. Increasing the proportion of bison inoculum resulted in a quadratic effect (P < 0.05) on straw, concentrate and total true DM disappearance and on straw and total neutral detergent fiber (aNDF) disappearance, with greater disappearances observed with mixed inoculum. There were no effect of source or proportion of inoculum on ADF disappearance (P > 0.05). Increasing bison inoculum linearly increased (P < 0.05) concentrate aNDF disappearance, total and concentrate N disappearance as well as total daily VFA and acetate production. A positive quadratic response (P < 0.05) was observed for daily NH3-N, propionate, butyrate, valerate, isovalerate and isobutyrate production, as well as the acetate:propionate ratio. Increasing the proportion of bison inoculum linearly increased (P < 0.05) total protozoa numbers. No effects were observed on pH, total gas and methane production, microbial N synthesis, or copies of 16S rRNA associated with total bacteria, Selenomonas ruminantium or Prevotella bryantii. Increasing bison inoculum had a quadratic effect (P < 0.05) on Fibrobacter succinogenes, and tended to linearly (P < 0.10) increase Ruminococcus flavefaciens and decrease (P < 0.05) Ruminococcus albus copy numbers. In conclusion, bison inoculum increased the degradation of feed protein and fiber. A mixture of cattle and bison rumen inoculum acted synergistically, increasing the DM and aNDF disappearance of barley straw. PMID:28018336

The Impact of a 940 nm Diode Laser with Radial Firing Tip and Bare End Fiber Tip on Enterococcus faecalis in the Root Canal Wall Dentin of Bovine Teeth: An In Vitro Study.

PubMed

Schulte-Lünzum, Ruth; Gutknecht, Norbert; Conrads, Georg; Franzen, Rene

2017-07-01

This in vitro study aimed to compare the bactericidal effect of two different laser delivery systems, a radial firing tip (RFT) and bare end fiber tip (BFT) used with the 940 nm diode laser on Enterococcus faecalis inoculated onto bovine radicular dentin. A total of 100 bovine dentin slices with a defined thickness of 500 and 1000 μm were prepared. They were assigned into four test groups together with untreated samples served as control for each slice thickness. The slices were inoculated on one side with 1 μL E. faecalis suspension and laser irradiation was performed indirectly on the opposite side with the 940 nm diode laser delivered with a 200 μm RFT and a BFT at 1 and 1.5 W in continuous wave mode for 8 sec per cycle and repeated four times. After irradiation, the remaining bacteria were detached and the produced suspension was diluted and plated onto blood agar plates with 5% sheep blood and incubated overnight at 37°C in a CO 2 -rich atmosphere. The colony-forming units of E. faecalis were counted and the bacterial reduction was analyzed. The diode laser equipped with RFT fiber design further reduced the number of vital E. faecalis cells significantly compared with BFT design, regardless of the used power and dentin thickness (p < 0.0001). The highest average value of 4 log kills was observed in 500 μm slice thickness irradiated with RFT at 1.5 W. Temperature measurements on the external root surface at 1 mm from the apex did not elicit a harmful temperature elevation in both power settings and fiber designs. Within the studied parameters, 940 nm diode laser in conjugation with RFT showed a satisfactory bactericidal effect without any thermal side effect to the tooth-supporting tissues.

Differential requirement for satellite cells during overload-induced muscle hypertrophy in growing versus mature mice.

PubMed

Murach, Kevin A; White, Sarah H; Wen, Yuan; Ho, Angel; Dupont-Versteegden, Esther E; McCarthy, John J; Peterson, Charlotte A

2017-07-10

Pax7+ satellite cells are required for skeletal muscle fiber growth during post-natal development in mice. Satellite cell-mediated myonuclear accretion also appears to persist into early adulthood. Given the important role of satellite cells during muscle development, we hypothesized that the necessity of satellite cells for adaptation to an imposed hypertrophic stimulus depends on maturational age. Pax7 CreER -R26R DTA mice were treated for 5 days with vehicle (satellite cell-replete, SC+) or tamoxifen (satellite cell-depleted, SC-) at 2 months (young) and 4 months (mature) of age. Following a 2-week washout, mice were subjected to sham surgery or 10 day synergist ablation overload of the plantaris (n = 6-9 per group). The surgical approach minimized regeneration, de novo fiber formation, and fiber splitting while promoting muscle fiber growth. Satellite cell density (Pax7+ cells/fiber), embryonic myosin heavy chain expression (eMyHC), and muscle fiber cross sectional area (CSA) were evaluated via immunohistochemistry. Myonuclei (myonuclei/100 mm) were counted on isolated single muscle fibers. Tamoxifen treatment depleted satellite cells by ≥90% and prevented myonuclear accretion with overload in young and mature mice (p < 0.05). Satellite cells did not recover in SC- mice after overload. Average muscle fiber CSA increased ~20% in young SC+ (p = 0.07), mature SC+ (p < 0.05), and mature SC- mice (p < 0.05). In contrast, muscle fiber hypertrophy was prevented in young SC- mice. Muscle fiber number increased only in mature mice after overload (p < 0.05), and eMyHC expression was variable, specifically in mature SC+ mice. Reliance on satellite cells for overload-induced hypertrophy is dependent on maturational age, and global responses to overload differ in young versus mature mice.

[Determination of total, soluble and insoluble dietary fiber in foods by enzymatic-gravimetric method].

PubMed

Yang, X; Yang, Y; Zhou, R; Bian, L

2001-11-01

For studying the contents of dietary fiber in general foods and functional foods, a enzymatic-gravimetric method recommended by AOAC was established in our laboratory. The method for the determination of total, soluble and insoluble dietary fiber in foods and functional foods could be used for many other kind of foods. The relative standard deviations (RSD) of reproducibility between-run and within-run were 2.04%-7.85%, 3.42%-55.23% respectively. The repeatability of the methods was good, and the methods are suitable for many foods.

Design Study for the Asteroid Redirect Vehicle (ARV) Composite Primary Bulkhead

NASA Technical Reports Server (NTRS)

Cressman, Thomas O.; Paddock, David A.

2017-01-01

A design study was undertaken of a carbon fiber primary bulkhead for a large solar electric propulsion (SEP) spacecraft. The bulkhead design, supporting up to 16 t of xenon propellant, progressed from one consisting of many simple parts with many complex joints, to one consisting of a few complex parts with a few simple joints. The unique capabilities of composites led to a topology that transitioned loads from bending to in-plane tension and shear, with low part count. This significantly improved bulkhead manufacturability, cost, and mass. The stiffness-driven structure utilized high-modulus M55J fiber unidirectional prepregs. A full-scale engineering demonstration unit (EDU) of the concept was used to demonstrate manufacturability of the concept. Actual labor data was obtained, which could be extrapolated to a full bulkhead. The effort demonstrated the practicality of using high-modulus fiber (HMF) composites for unique shape topologies that minimize mass and cost. The lessons are applicable to primary and secondary aerospace structures that are stiffness driven.

Environmental asbestos exposure in rural Turkey and risk of lung cancer.

PubMed

Metintas, Selma; Metintas, Muzaffer; Ak, Guntulu; Kalyoncu, Cemalettin

2012-01-01

The aim of this study was to determine the risk of lung cancer in a cohort of villagers with environmental asbestos exposure. The study was carried out as a field-based epidemiological study. Information from 3143 individuals in 15 asbestos exposed villages and 2175 individuals in 12 control villages was obtained. Asbestos fiber type to which villagers were exposed mainly was tremolite or tremolite, actinolite, chrysotile mixtures. The cumulative fiber count of the villagers during their lifespan ranged from 0.19 to 4.61 fiber-years/ml. The annual average incidence ratio of lung cancer was 135.21/100,000 persons/year in men and 47.28 in women in the asbestos exposed villages. For the control villages, this ratio was 60.15/100,000 person/year in men and 15.06 in women. Being a male, advanced age, smoking and asbestos exposure were established to increase the risk of lung cancer. Environmental asbestos exposure in rural area is a risk factor for lung cancer independent of smoking.

Urinary estrogen profile determination in young Finnish vegetarian and omnivorous women.

PubMed

Adlercreutz, H; Fotsis, T; Bannwart, C; Hämäläinen, E; Bloigu, S; Ollus, A

1986-01-01

For a long time it has been postulated that diet may influence estrogen metabolism and in this way affect breast cancer risk. In order to investigate possible effects of variations of dietary fiber intake on estrogen metabolism, the urinary estrogen profile (13 estrogens), including the catecholestrogens, was determined in one 72-h summer and one winter sample collected in the midfollicular phase of the menstrual cycle by 11 lactovegetarian and 12 omnivorous young Finnish women. Urinary estrogens were purified by ion-exchange chromatography and the quantitative determination was carried out by capillary gas chromatography-mass spectrometry. Detailed records of the subjects' diet during one 5-day period in summer and one in winter were obtained and dietary fiber intake calculated. The mean difference with regard to intake of total fiber in the two dietary groups was 3 g/day in the summer (not significant) and 5 g/day in the winter (P less than 0.05), the mean (geometric) consumption being 23 and 19 g/day by the vegetarian and omnivorous women, respectively. Within the groups we found seasonal variation in fiber intake only for the omnivorous women. During winter, compared to summer, the omnivorous women consumed significantly less grain (P less than 0.001), vegetable (P less than 0.02) and total fiber (P less than 0.02). The excretion of 13 estrogens was remarkably constant in the omnivoric group but a significant seasonal variation of total and individual catecholestrogens and of estrone was observed in the vegetarians (P less than 0.05-0.005). The quantitatively most important estrogen was 2-hydroxyestrone, followed by estrone, estriol, 2-hydroxyestradiol, 4-hydroxyestrone and estradiol, the three latter being excreted in similar amounts. Between the dietary groups there were no significant differences in excretion of total or individual urinary estrogens in any season or between the mean values for both seasons. However, numerous significant (P less than 0.05-0.01) negative correlations between dietary intake of total or grain fiber/kg body weight and the excretion of individual estrogens were found. These correlations disappeared if the fiber intake was not related to body weight. We conclude that dietary fiber intake significantly affects estrogen metabolism by reducing estrogen excretion in urine and that grain fiber seems to be most important in that respect. One of the mechanisms involved is a partial interruption of the enterohepatic circulation of the estrogens, due to alterations of the intestinal metabolism and reabsorption of these steroids, caused by the fiber.

Flame retardant behavior of polyelectrolyte-clay thin film assemblies on cotton fabric.

PubMed

Li, Yu-Chin; Schulz, Jessica; Mannen, Sarah; Delhom, Chris; Condon, Brian; Chang, Sechin; Zammarano, Mauro; Grunlan, Jaime C

2010-06-22

Cotton fabric was treated with flame-retardant coatings composed of branched polyethylenimine (BPEI) and sodium montmorillonite (MMT) clay, prepared via layer-by-layer (LbL) assembly. Four coating recipes were created by exposing fabric to aqueous solutions of BPEI (pH 7 or 10) and MMT (0.2 or 1 wt %). BPEI pH 10 produces the thickest films, while 1 wt % MMT gives the highest clay loading. Each coating recipe was evaluated at 5 and 20 bilayers. Thermogravimetric analysis showed that coated fabrics left as much as 13% char after heating to 500 degrees C, nearly 2 orders of magnitude more than uncoated fabric, with less than 4 wt % coming from the coating itself. These coatings also reduced afterglow time in vertical flame tests. Postburn residues of coated fabrics were examined with SEM and revealed that the weave structure and fiber shape in all coated fabrics were preserved. The BPEI pH 7/1 wt % MMT recipe was most effective. Microcombustion calorimeter testing showed that all coated fabrics reduced the total heat release and heat release capacity of the fabric. Fiber count and strength of uncoated and coated fabric are similar. These results demonstrate that LbL assembly is a relatively simple method for imparting flame-retardant behavior to cotton fabric. This work lays the foundation for using these types of thin film assemblies to make a variety of complex substrates (foam, fabrics, etc.) flame resistant.

Short communication: bulk tank total bacterial count in dairy sheep: factors of variation and relationship with somatic cell count.

PubMed

Gonzalo, C; Carriedo, J A; Beneitez, E; Juárez, M T; De La Fuente, L F; San Primitivo, F

2006-02-01

A total of 9,353 records for bulk tank total bacterial count (TBC) were obtained over 1 yr from 315 dairy ewe flocks belonging to the Sheep Improvement Consortium (CPO) in Castilla-León (Spain). Analysis of variance showed significant effects of flock, breed, month within flock, dry therapy, milking type and installation, and logSCC on logTBC. Flock and month within flock were important variation factors as they accounted for 22.0 and 22.1% of the variance, respectively. Considerable repeatability values were obtained for both random factors. Hand milking and bucket-milking machines elicited highest logTBC (5.31), whereas parlor systems with looped milkline (5.01) elicited the lowest logTBC. The implementation of dry therapy practice (5.12) showed significantly lower logTBC than when not used (5.25). Variability in logTBC among breeds ranged from 5.24 (Awassi) to 5.07 (Churra). However, clinical outbreaks of contagious agalactia did not increase TBC significantly. A statistically significant relationship was found between logTBC and logSCC, the correlation coefficient between the variables being r = 0.23. Programs for improving milk hygiene should be implemented for both total bacterial count and somatic cell count variables at the same time.

Comparison of m-Endo LES, MacConkey, and Teepol media for membrane filtration counting of total coliform bacteria in water.

PubMed Central

Grabow, W O; du Preez, M

1979-01-01

Total coliform counts obtained by means of standard membrane filtration techniques, using MacConkey agar, m-Endo LES agar, Teepol agar, and pads saturated with Teepol broth as growth media, were compared. Various combinations of these media were used in tests on 490 samples of river water and city wastewater after different stages of conventional purification and reclamation processes including lime treatment, and filtration, active carbon treatment, ozonation, and chlorination. Endo agar yielded the highest average counts for all these samples. Teepol agar generally had higher counts then Teepol broth, whereas MacConkey agar had the lowest average counts. Identification of 871 positive isolates showed that Aeromonas hydrophila was the species most commonly detected. Species of Escherichia, Citrobacter, Klebsiella, and Enterobacter represented 55% of isolates which conformed to the definition of total coliforms on Endo agar, 54% on Teepol agar, and 45% on MacConkey agar. Selection for species on the media differed considerably. Evaluation of these data and literature on alternative tests, including most probable number methods, indicated that the technique of choice for routine analysis of total coliform bacteria in drinking water is membrane filtration using m-Endo LES agar as growth medium without enrichment procedures or a cytochrome oxidase restriction. PMID:394678

Guidebooks for estimating total transit usage through extrapolating incomplete counts : final report.

DOT National Transportation Integrated Search

2016-09-01

This report provides guidance for transit agencies to estimate transit usage for reporting to the National Transit : Database (NTD) when their counting procedure that is designed to perform full counts misses some trips. Transit usage : refers to unl...

Hawaii Census 2000 Blocks

EPA Pesticide Factsheets

This data layer represents Census 2000 demographic data derived from the PL94-171 redistricting files and SF3. Census geographic entities include blocks, blockgroups and tracts. Tiger line files are the source of the geometry representing the Census blocks. Attributes include total population counts, racial/ethnic, and poverty/income information. Racial/ethnic classifications are represented in units of blocks, blockgroups and tracts. Poverty and income data are represented in units of blockgroups and tracts. Percentages of each racial/ethnic group have been calculated from the population counts. Total Minority counts and percentages were compiled from each racial/ethnic non-white category. Categories compiled to create the Total Minority count includes the following: African American, Asian, American Indian, Pacific Islander, White Hispanic, Other and all mixed race categories. The percentage poverty attribute represents the percent of the population living at or below poverty level. The per capita income attribute represents the sum of all income within the geographic entity, divided by the total population of that entity. Special fields designed to be used for EJ analysis have been derived from the PL data and include the following: Percentage difference of block, blockgroup and total minority from the state and county averages, percentile rank for each percent total minority within state and county entitie

Hawaii Census 2000 Tracts

EPA Pesticide Factsheets

This data layer represents Census 2000 demographic data derived from the PL94-171 redistricting files and SF3. Census geographic entities include blocks, blockgroups and tracts. Tiger line files are the source of the geometry representing the Census blocks. Attributes include total population counts, racial/ethnic, and poverty/income information. Racial/ethnic classifications are represented in units of blocks, blockgroups and tracts. Poverty and income data are represented in units of blockgroups and tracts. Percentages of each racial/ethnic group have been calculated from the population counts. Total Minority counts and percentages were compiled from each racial/ethnic non-white category. Categories compiled to create the Total Minority count includes the following: African American, Asian, American Indian, Pacific Islander, White Hispanic, Other and all mixed race categories. The percentage poverty attribute represents the percent of the population living at or below poverty level. The per capita income attribute represents the sum of all income within the geographic entity, divided by the total population of that entity. Special fields designed to be used for EJ analysis have been derived from the PL data and include the following: Percentage difference of block, blockgroup and total minority from the state and county averages, percentile rank for each percent total minority within state and county entitie

Hawaii Census 2000 Block Groups

EPA Pesticide Factsheets

This data layer represents Census 2000 demographic data derived from the PL94-171 redistricting files and SF3. Census geographic entities include blocks, blockgroups and tracts. Tiger line files are the source of the geometry representing the Census blocks. Attributes include total population counts, racial/ethnic, and poverty/income information. Racial/ethnic classifications are represented in units of blocks, blockgroups and tracts. Poverty and income data are represented in units of blockgroups and tracts. Percentages of each racial/ethnic group have been calculated from the population counts. Total Minority counts and percentages were compiled from each racial/ethnic non-white category. Categories compiled to create the Total Minority count includes the following: African American, Asian, American Indian, Pacific Islander, White Hispanic, Other and all mixed race categories. The percentage poverty attribute represents the percent of the population living at or below poverty level. The per capita income attribute represents the sum of all income within the geographic entity, divided by the total population of that entity. Special fields designed to be used for EJ analysis have been derived from the PL data and include the following: Percentage difference of block, blockgroup and total minority from the state and county averages, percentile rank for each percent total minority within state and county entitie

System for rapid detection of antibiotic resistance of airborne pathogens

NASA Astrophysics Data System (ADS)

Fortin, M.; Noiseux, I.; Mouslinkina, L.; Vernon, M. L.; Laflamme, C.; Filion, G.; Duchaine, C.; Ho, J.

2009-05-01

This project uses function-based detection via a fundamental understanding of the genetic markers of AR to distinguish harmful organisms from innocuous ones. This approach circumvents complex analyses to unravel the taxonomic details of 1399 pathogen species, enormously simplifying detection requirements. Laval Hospital's fast permeabilization strategy enables AR revelation in <1hr. Packaging the AR protocols in liquid-processing cartridges and coupling these to our in-house miniature fiber optic flow cell (FOFC) provides first responders with timely information on-site. INO's FOFC platform consists of a specialty optical fiber through which a hole is transversally bored by laser micromachining. The analyte solution is injected into the hole of the fiber and the particles are detected and counted. The advantage with respect to classic free space FC is that alignment occurs in the fabrication process only and complex excitation and collection optics are replaced by optical fibers. Moreover, we use a sheathless configuration which has the advantage of increase the portability of the system, to reduce excess biohazard material and the need for weekly maintenance. In this paper we present the principle of our FOFC along with a, demonstration of the basic capability of the platform for detection of bacillus cereus spores using permeabilized staining.

Hopfield neural network and optical fiber sensor as intelligent heart rate monitor

NASA Astrophysics Data System (ADS)

Mutter, Kussay Nugamesh

2018-01-01

This paper presents a design and fabrication of an intelligent fiber-optic sensor used for examining and monitoring heart rate activity. It is found in the literature that the use of fiber sensors as heart rate sensor is widely studied. However, the use of smart sensors based on Hopfield neural networks is very low. In this work, the sensor is a three fibers without cladding of about 1 cm, fed by laser light of 1550 nm of wavelength. The sensing portions are mounted with a micro sensitive diaphragm to transfer the pulse pressure on the left radial wrist. The influenced light intensity will be detected by a three photodetectors as inputs into the Hopfield neural network algorithm. The latter is a singlelayer auto-associative memory structure with a same input and output layers. The prior training weights are stored in the net memory for the standard recorded normal heart rate signals. The sensors' heads work on the reflection intensity basis. The novelty here is that the sensor uses a pulse pressure and Hopfield neural network in an integrity approach. The results showed a significant output measurements of heart rate and counting with a plausible error rate.

16 CFR 303.6 - Generic names of fibers to be used.

Code of Federal Regulations, 2010 CFR

2010-01-01

... hair or fiber of a fur-bearing animal present in the amount 5 per centum or more of the total fiber... required information, provided the name of such animal is used in conjunction with the words “fiber,” “hair,” or “blend;” as for example: 80 percent Rabbit hair. 20 percent Nylon. or 80 percent Silk. 20 percent...

16 CFR 303.6 - Generic names of fibers to be used.

Code of Federal Regulations, 2014 CFR

2014-01-01

... hair or fiber of a fur-bearing animal present in the amount 5 per centum or more of the total fiber... required information, provided the name of such animal is used in conjunction with the words “fiber,” “hair,” or “blend;” as for example: 80 percent Rabbit hair. 20 percent Nylon. or 80 percent Silk. 20 percent...

16 CFR 303.6 - Generic names of fibers to be used.

Code of Federal Regulations, 2013 CFR

2013-01-01

... hair or fiber of a fur-bearing animal present in the amount 5 per centum or more of the total fiber... required information, provided the name of such animal is used in conjunction with the words “fiber,” “hair,” or “blend;” as for example: 80 percent Rabbit hair. 20 percent Nylon. or 80 percent Silk. 20 percent...

16 CFR 303.6 - Generic names of fibers to be used.

Code of Federal Regulations, 2011 CFR

2011-01-01

... hair or fiber of a fur-bearing animal present in the amount 5 per centum or more of the total fiber... required information, provided the name of such animal is used in conjunction with the words “fiber,” “hair,” or “blend;” as for example: 80 percent Rabbit hair. 20 percent Nylon. or 80 percent Silk. 20 percent...

16 CFR 303.6 - Generic names of fibers to be used.

Code of Federal Regulations, 2012 CFR

2012-01-01

... hair or fiber of a fur-bearing animal present in the amount 5 per centum or more of the total fiber... required information, provided the name of such animal is used in conjunction with the words “fiber,” “hair,” or “blend;” as for example: 80 percent Rabbit hair. 20 percent Nylon. or 80 percent Silk. 20 percent...

Nondestructive detection of total viable count changes of chilled pork in high oxygen storage condition based on hyperspectral technology

NASA Astrophysics Data System (ADS)

Zheng, Xiaochun; Peng, Yankun; Li, Yongyu; Chao, Kuanglin; Qin, Jianwei

2017-05-01

The plate count method is commonly used to detect the total viable count (TVC) of bacteria in pork, which is timeconsuming and destructive. It has also been used to study the changes of the TVC in pork under different storage conditions. In recent years, many scholars have explored the non-destructive methods on detecting TVC by using visible near infrared (VIS/NIR) technology and hyperspectral technology. The TVC in chilled pork was monitored under high oxygen condition in this study by using hyperspectral technology in order to evaluate the changes of total bacterial count during storage, and then evaluate advantages and disadvantages of the storage condition. The VIS/NIR hyperspectral images of samples stored in high oxygen condition was acquired by a hyperspectral system in range of 400 1100nm. The actual reference value of total bacteria was measured by standard plate count method, and the results were obtained in 48 hours. The reflection spectra of the samples are extracted and used for the establishment of prediction model for TVC. The spectral preprocessing methods of standard normal variate transformation (SNV), multiple scatter correction (MSC) and derivation was conducted to the original reflectance spectra of samples. Partial least squares regression (PLSR) of TVC was performed and optimized to be the prediction model. The results show that the near infrared hyperspectral technology based on 400-1100nm combined with PLSR model can describe the growth pattern of the total bacteria count of the chilled pork under the condition of high oxygen very vividly and rapidly. The results obtained in this study demonstrate that the nondestructive method of TVC based on NIR hyperspectral has great potential in monitoring of edible safety in processing and storage of meat.

A review of dietary fiber and health: focus on raisins.

PubMed

Bell, Stacey J

2011-09-01

Fibers vary in their physiologic effects. For example, viscous fibers may delay gastric emptying of ingested foods into the small intestine, creating a sensation of fullness; reduce blood glucose concentrations; and potentially benefit insulin sensitivity. They also improve blood cholesterol levels. Insoluble fibers are poorly absorbed and are known to improve fecal bulk and laxation and ameliorate constipation. Despite these numerous benefits, most Americans do not get enough of either kind of fiber in the diet. Some have argued that fiber-rich foods are not appetizing and therefore avoided. Raisins contain both forms of fiber and have a sweet flavor. This review provides support for consuming adequate fiber in the diet and suggests a role for raisins to help increase total dietary fiber.

Assessment of background hydrogen by the Monte Carlo computer code MCNP-4A during measurements of total body nitrogen.

PubMed

Ryde, S J; al-Agel, F A; Evans, C J; Hancock, D A

2000-05-01

The use of a hydrogen internal standard to enable the estimation of absolute mass during measurement of total body nitrogen by in vivo neutron activation is an established technique. Central to the technique is a determination of the H prompt gamma ray counts arising from the subject. In practice, interference counts from other sources--e.g., neutron shielding--are included. This study reports use of the Monte Carlo computer code, MCNP-4A, to investigate the interference counts arising from shielding both with and without a phantom containing a urea solution. Over a range of phantom size (depth 5 to 30 cm, width 20 to 40 cm), the counts arising from shielding increased by between 4% and 32% compared with the counts without a phantom. For any given depth, the counts increased approximately linearly with width. For any given width, there was little increase for depths exceeding 15 centimeters. The shielding counts comprised between 15% and 26% of those arising from the urea phantom. These results, although specific to the Swansea apparatus, suggest that extraneous hydrogen counts can be considerable and depend strongly on the subject's size.

Splanchnic preganglionic neurons in man. III. Morphometry of myelinated fibers of rami communicantes.

PubMed

Low, P A; Dyck, P J

1978-01-01

The myelinated fiber (MF) composition of T6-T8 Rami Communicantes were obtained in 9 healthy persons of various ages. The textbook picture that distal rami (DR) contain all of the myelinated fibers and therefore are white, while proximal rami (PR) contain none of them and therefore are grey must be modified. We found that DR usually contained abundant MFs and that PR concordance was found between segmental numbers of intermediolateral nuclei cytons, ventral root small myelinated fibers (SMFs), and rami total small MFs to suggest that both rami probably contain the distal myelinated axons of preganglionic autonomic fibers. Finally, there was an attrition of total MFs of rami with age, similar to what we had previously found for ILC cytons and for root SMFs. The decrease in number of pre-ganglionic autonomic neurons with age is thought to be of sufficient magnitude to account for the dysautonomia of the elderly.

Performance analysis of fiber-based free-space optical communications with coherent detection spatial diversity.

PubMed

Li, Kangning; Ma, Jing; Tan, Liying; Yu, Siyuan; Zhai, Chao

2016-06-10

The performances of fiber-based free-space optical (FSO) communications over gamma-gamma distributed turbulence are studied for multiple aperture receiver systems. The equal gain combining (EGC) technique is considered as a practical scheme to mitigate the atmospheric turbulence. Bit error rate (BER) performances for binary-phase-shift-keying-modulated coherent detection fiber-based free-space optical communications are derived and analyzed for EGC diversity receptions through an approximation method. To show the net diversity gain of a multiple aperture receiver system, BER performances of EGC are compared with a single monolithic aperture receiver system with the same total aperture area (same average total incident optical power on the aperture surface) for fiber-based free-space optical communications. The analytical results are verified by Monte Carlo simulations. System performances are also compared for EGC diversity coherent FSO communications with or without considering fiber-coupling efficiencies.

Dietary Fiber Intake in Relation to Knee Pain Trajectory.

PubMed

Dai, Zhaoli; Lu, Na; Niu, Jingbo; Felson, David T; Zhang, Yuqing

2017-09-01

Dietary fiber may reduce knee pain, in part by lowering body weight and reducing inflammation. In this study, we assessed whether fiber intake was associated with patterns of knee pain development. In a prospective, multicenter cohort of 4,796 men and women ages 45-79 years with or at risk of knee osteoarthritis, participants underwent annual followups for 8 years. Dietary fiber intake was estimated using a validated food frequency questionnaire at baseline. Group-based trajectory modeling was used to identify Western Ontario and McMaster Universities Osteoarthritis Index pain trajectories, which were assessed for associations with dietary fiber intake using polytomous regression models. Of the eligible participants (4,470 persons and 8,940 knees, mean ± SD age 61.3 ± 9.1 years, 58% women), 4.9% underwent knee replacement and were censored at the time of surgery. Four distinct knee pain patterns were identified: no pain (34.5%), mild pain (38.1%), moderate pain (21.2%), and severe pain (6.2%). Dietary total fiber was inversely related to membership in the moderate or severe pain groups (P ≤ 0.006 for trend for both). Subjects in the highest versus those in the lowest quartile of total fiber intake had a lower risk of belonging to the moderate pain pattern group (odds ratio [OR] 0.76 [95% confidence interval (95% CI) 0.61-0.93]) and severe pain pattern group (OR 0.56 [95% CI 0.41-0.78]). Similar results were found with grain fiber and these 2 pain pattern groups. Our findings suggest that a high intake of dietary total or grain fiber, particularly the recommended daily fiber average intake of 25 gm per day, is associated with a lower risk of developing moderate or severe knee pain over time. © 2016, American College of Rheumatology.

Effect of gamma irradiation on microbial quality of minimally processed carrot and lettuce: A case study in Greater Accra region of Ghana

NASA Astrophysics Data System (ADS)

Frimpong, G. K.; Kottoh, I. D.; Ofosu, D. O.; Larbi, D.

2015-05-01

The effect of ionizing radiation on the microbiological quality on minimally processed carrot and lettuce was studied. The aim was to investigate the effect of irradiation as a sanitizing agent on the bacteriological quality of some raw eaten salad vegetables obtained from retailers in Accra, Ghana. Minimally processed carrot and lettuce were analysed for total viable count, total coliform count and pathogenic organisms. The samples collected were treated and analysed for a 15 day period. The total viable count for carrot ranged from 1.49 to 14.01 log10 cfu/10 g while that of lettuce was 0.70 to 8.5 7 log10 cfu/10 g. It was also observed that total coliform count for carrot was 1.46-7.53 log10 cfu/10 g and 0.14-7.35 log10 cfu/10 g for lettuce. The predominant pathogenic organisms identified were Bacillus cereus, Cronobacter sakazakii, Staphylococcus aureus, and Klebsiella spp. It was concluded that 2 kGy was most effective for medium dose treatment of minimally processed carrot and lettuce.

Total radiated power, infrared output, and heat generation by cold light sources at the distal end of endoscopes and fiber optic bundle of light cables.

PubMed

Hensman, C; Hanna, G B; Drew, T; Moseley, H; Cuschieri, A

1998-04-01

Skin burns and ignition of drapes have been reported with the use of cold light sources. The aim of the study was to document the temperature generated by cold light sources and to correlate this with the total radiated power and infrared output. The temperature, total radiated power, and infrared output were measured as a function of time at the end of the endoscope (which is inserted into the operative field) and the end of the fiber optic bundle of the light cable (which connects the cable to the light port of the endoscope) using halogen and xenon light sources. The highest temperature recorded at the end of the endoscope was 95 degrees C. The temperature measured at the optical fiber location of the endoscope was higher than at its lens surface (p < 0.0001). At the end of the fiber optic bundle of light cables, the temperature reached 225 degrees C within 15 s. The temperature recorded at the optical fiber location of all endoscopes and light cables studied rose significantly over a period of 10 min to reach its maximum (p <0.0001) and then leveled off for the duration of the study (30 min). The infrared output accounted only for 10% of the total radiated power. High temperatures are reached by 10 min at the end of fiber optic bundle of light cables and endoscopes with both halogen and xenon light sources. This heat generation is largely due to the radiated power in the visible light spectrum.

Compositional features of cotton plant biomass fractions characterized by attenuated total reflection Fourier transform infrared spectroscopy

USDA-ARS?s Scientific Manuscript database

Cotton is one of the most important and widely grown crops in the world. In addition to natural textile fiber production as a primary purpose, it yields a high grade vegetable oil for human consumption and also carbohydrate fiber and protein byproducts for animal feed. In this work, attenuated total...

A statistical treatment of bioassay pour fractions

NASA Astrophysics Data System (ADS)

Barengoltz, Jack; Hughes, David

A bioassay is a method for estimating the number of bacterial spores on a spacecraft surface for the purpose of demonstrating compliance with planetary protection (PP) requirements (Ref. 1). The details of the process may be seen in the appropriate PP document (e.g., for NASA, Ref. 2). In general, the surface is mechanically sampled with a damp sterile swab or wipe. The completion of the process is colony formation in a growth medium in a plate (Petri dish); the colonies are counted. Consider a set of samples from randomly selected, known areas of one spacecraft surface, for simplicity. One may calculate the mean and standard deviation of the bioburden density, which is the ratio of counts to area sampled. The standard deviation represents an estimate of the variation from place to place of the true bioburden density commingled with the precision of the individual sample counts. The accuracy of individual sample results depends on the equipment used, the collection method, and the culturing method. One aspect that greatly influences the result is the pour fraction, which is the quantity of fluid added to the plates divided by the total fluid used in extracting spores from the sampling equipment. In an analysis of a single sample’s counts due to the pour fraction, one seeks to answer the question: What is the probability that if a certain number of spores are counted with a known pour fraction, that there are an additional number of spores in the part of the rinse not poured. This is given for specific values by the binomial distribution density, where detection (of culturable spores) is success and the probability of success is the pour fraction. A special summation over the binomial distribution, equivalent to adding for all possible values of the true total number of spores, is performed. This distribution when normalized will almost yield the desired quantity. It is the probability that the additional number of spores does not exceed a certain value. Of course, for a desired value of uncertainty, one must invert the calculation. However, this probability of finding exactly the number of spores in the poured part is correct only in the case where all values of the true number of spores greater than or equal to the adjusted count are equally probable. This is not realistic, of course, but the result can only overestimate the uncertainty. So it is useful. In probability speak, one has the conditional probability given any true total number of spores. Therefore one must multiply it by the probability of each possible true count, before the summation. If the counts for a sample set (of which this is one sample) are available, one may use the calculated variance and the normal probability distribution. In this approach, one assumes a normal distribution and neglects the contribution from spatial variation. The former is a common assumption. The latter can only add to the conservatism (over estimate the number of spores at some level of confidence). A more straightforward approach is to assume a Poisson probability distribution for the measured total sample set counts, and use the product of the number of samples and the mean number of counts per sample as the mean of the Poisson distribution. It is necessary to set the total count to 1 in the Poisson distribution when actual total count is zero. Finally, even when the planetary protection requirements for spore burden refer only to the mean values, they require an adjustment for pour fraction and method efficiency (a PP specification based on independent data). The adjusted mean values are a 50/50 proposition (e.g., the probability of the true total counts in the sample set exceeding the estimate is 0.50). However, this is highly unconservative when the total counts are zero. No adjustment to the mean values occurs for either pour fraction or efficiency. The recommended approach is once again to set the total counts to 1, but now applied to the mean values. Then one may apply the corrections to the revised counts. It can be shown by the methods developed in this work that this change is usually conservative enough to increase the level of confidence in the estimate to 0.5. 1. NASA. (2005) Planetary protection provisions for robotic extraterrestrial missions. NPR 8020.12C, April 2005, National Aeronautics and Space Administration, Washington, DC. 2. NASA. (2010) Handbook for the Microbiological Examination of Space Hardware, NASA-HDBK-6022, National Aeronautics and Space Administration, Washington, DC.

Mold and aflatoxin reduction by gamma radiation of packed hot peppers and their evolution during storage.

PubMed

Iqbal, Qumer; Amjad, Muhammad; Asi, Muhammad Rafique; Ariño, Agustin

2012-08-01

The effect of gamma radiation on moisture content, total mold counts, Aspergillus counts, and aflatoxins of three hot pepper hybrids (Sky Red, Maha, and Wonder King) was investigated. Whole dried peppers packed in polyethylene bags were gamma irradiated at 0 (control), 2, 4, and 6 kGy and stored at 25°C for 90 days. Gamma radiation proved to be effective in reducing total mold and Aspergillus counts in a dose-dependent relationship. Total mold counts in irradiated peppers immediately after treatments were significantly lowered compared with those in nonirradiated samples, achieving 90 and 99% reduction at 2- and 4-kGy doses, respectively. Aspergillus counts were significantly reduced, by 93 and 97%, immediately after irradiation at doses of 2 and 4 kGy, respectively. A radiation dose of 6 kGy completely eliminated the population of total molds and Aspergillus fungi. The evolution of total molds in control and irradiated samples indicated no further fungal proliferation during 3 months of storage at 25°C. Aflatoxin levels were slightly affected by radiation doses of 2 and 4 kGy and showed a nonsignificant reduction of 6% at the highest radiation dose of 6 kGy. The distinct effectiveness of gamma radiation in molds and aflatoxins can be explained by the target theory of food irradiation, which states that the likelihood of a microorganism or a molecule being inactivated by gamma rays increases as its size increases.

Coupling system to a microsphere cavity

NASA Technical Reports Server (NTRS)

Iltchenko, Vladimir (Inventor); Maleki, Lute (Inventor); Yao, Steve (Inventor); Wu, Chi (Inventor)

2002-01-01

A system of coupling optical energy in a waveguide mode, into a resonator that operates in a whispering gallery mode. A first part of the operation uses a fiber in its waveguide mode to couple information into a resonator e.g. a microsphere. The fiber is cleaved at an angle .PHI. which causes total internal reflection within the fiber. The energy in the fiber then forms an evanescent field and a microsphere is placed in the area of the evanescent field. If the microsphere resonance is resonant with energy in the fiber, then the information in the fiber is effectively transferred to the microsphere.

HIGH SENSITIVITY ELECTROSCOPE

DOEpatents

Shonka, F.R.; Okleshen, A.J.

1958-08-12

An electrometer with dependable and rugged construction for measuring cxtremely small charges is de scribed. The electrometer arrangement comprises an electrically conducting fiber totally disposed in a single plane in the absence of electrosthtic forces and affixed at both ends to fiber support means. The fiber is provided with a plurality of adjacent bends in opposite directions along its length..An electrode is disposed between two adjacent bends to apply an electrostatic force normal to the plane of the fiber whereby the fiber is caused to twist out of its plane in proportion to the potential apptied between the fiber and the electrode.

Micro-optical fiber probe for use in an intravascular Raman endoscope.

PubMed

Komachi, Yuichi; Sato, Hidetoshi; Aizawa, Katsuo; Tashiro, Hideo

2005-08-01

We believe that we have developed the narrowest optical-fiber Raman probe ever reported, 600 microm in total diameter, that can be inserted into coronary arteries. The selection of suitable optical fibers, filters, and a processing method is discussed. Custom-made filters attached to the front end of a probe eliminate the background Raman signals of the optical fiber itself. The experimental evaluation of various optical fibers is carried out for the selection of suitable fibers. Measurement of the Raman spectra of an atherosclerotic lesion of a rabbit artery in vitro demonstrates the excellent performance of the micro-Raman probe.

Dietary fiber intake and depressive symptoms in Japanese employees: The Furukawa Nutrition and Health Study.

PubMed

Miki, Takako; Eguchi, Masafumi; Kurotani, Kayo; Kochi, Takeshi; Kuwahara, Keisuke; Ito, Rie; Kimura, Yasumi; Tsuruoka, Hiroko; Akter, Shamima; Kashino, Ikuko; Kabe, Isamu; Kawakami, Norito; Mizoue, Tetsuya

2016-05-01

Dietary fiber may play a favorable role in mood through gut microbiota, but epidemiologic evidence linking mood to dietary fiber intake is scarce in free-living populations. We investigated cross-sectionally the associations of dietary intakes of total, soluble, insoluble, and sources of fiber with depressive symptoms among Japanese workers. Participants were 1977 employees ages 19-69 y. Dietary intake was assessed via a validated, brief self-administered diet history questionnaire. Depressive symptoms were assessed using the Center for Epidemiologic Studies Depression Scale. Logistic regression was used to estimate odds ratios of depressive symptoms adjusted for a range of dietary and non-dietary potential confounders. Dietary fiber intake from vegetables and fruits was significantly inversely associated with depressive symptoms. The multivariable-adjusted odds ratios (95% confidence intervals) for the lowest through the highest tertile of vegetable and fruit fiber were 1.00 (reference), 0.80 (0.60-1.05), and 0.65 (0.45-0.95), respectively (P for trend = 0.03). Dietary intake of total, soluble, insoluble, and cereal fiber was not associated with depressive symptoms. Higher dietary fiber intake from vegetables and fruits may be associated with lower likelihood of having depressive symptoms. Copyright © 2016 Elsevier Inc. All rights reserved.

Effect of feeding low-fiber fraction of air-classified sunflower (Helianthus annus L.) meal on laying hen productive performance and egg yolk cholesterol.

PubMed

Laudadio, V; Ceci, E; Lastella, N M B; Tufarelli, V

2014-11-01

The present study was designed to determine the effect on laying performance and egg quality resulting from total substitution of soybean meal (SBM) with low-fiber sunflower meal (SFM; Helianthus annus L.) meal in diet of hens. ISA Brown layers, 28 wk of age, were randomly allocated to 2 dietary treatments and fed for 10 wk. The hens were kept in a free-range environment and fed 2 wheat middling-based diets consisting of a control diet, which contained SBM (153 g/kg of diet), and a test diet containing low-fiber SFM (160 g/kg of diet) as the main protein source. Each dietary treatment was replicated 4 times. Low-fiber SFM was obtained by a combination of sieving and air classification processes. Feed consumption was recorded daily and egg production was calculated on a hen-day basis; eggs from each group were collected weekly to evaluate egg components and quality. The total substitution of SBM with low-fiber SFM had no adverse effect on growth performance of laying hens. Egg production and none of egg quality traits examined were influenced by dietary treatment, except for yolk color (P < 0.05) and percentage of large-size eggs (P < 0.05) that were improved in hens fed the low-fiber SFM diet. Including low-fiber SFM decreased serum and egg yolk total cholesterol and low-density lipoprotein cholesterol concentrations (P < 0.001), and increased high-density lipoprotein cholesterol level. Our results suggest that the replacement of conventional soybean with low-fiber sunflower meal may be a valid alternative in diets for laying hens to improve egg quality and to develop low-cholesterol eggs. ©2014 Poultry Science Association Inc.

Chemical, biochemical, and environmental fiber sensors III; Proceedings of the Meeting, Boston, MA, Sept. 4, 5, 1991

NASA Astrophysics Data System (ADS)

Lieberman, Robert A.

Various papers on chemical, biochemical, and environmental fiber sensors are presented. Individual topics addressed include: fiber optic pressure sensor for combustion monitoring and control, viologen-based fiber optic oxygen sensors, renewable-reagent fiber optic sensor for ocean pCO2, transition metal complexes as indicators for a fiber optic oxygen sensor, fiber optic pH measurements using azo indicators, simple reversible fiber optic chemical sensors using solvatochromic dyes, totally integrated optical measuring sensors, integrated optic biosensor for environmental monitoring, radiation dosimetry using planar waveguide sensors, optical and piezoelectric analysis of polymer films for chemical sensor characterization, source polarization effects in an optical fiber fluorosensor, lens-type refractometer for on-line chemical analysis, fiber optic hydrocarbon sensor system, chemical sensors for environmental monitoring, optical fibers for liquid-crystal sensing and logic devices, suitability of single-mode fluoride fibers for evanescent-wave sensing, integrated modules for fiber optic sensors, optoelectronic sensors based on narrowband A3B5 alloys, fiber Bragg grating chemical sensor.

A rapid and universal bacteria-counting approach using CdSe/ZnS/SiO2 composite nanoparticles as fluorescence probe.

PubMed

Fu, Xin; Huang, Kelong; Liu, Suqin

2010-02-01

In this paper, a rapid, simple, and sensitive method was described for detection of the total bacterial count using SiO(2)-coated CdSe/ZnS quantum dots (QDs) as a fluorescence marker that covalently coupled with bacteria using glutaraldehyde as the crosslinker. Highly luminescent CdSe/ZnS were prepared by applying cadmium oxide and zinc stearate as precursors instead of pyrophoric organometallic precursors. A reverse-microemulsion technique was used to synthesize CdSe/ZnS/SiO(2) composite nanoparticles with a SiO(2) surface coating. Our results showed that CdSe/ZnS/SiO(2) composite nanoparticles prepared with this method possessed highly luminescent, biologically functional, and monodispersive characteristics, and could successfully be covalently conjugated with the bacteria. As a demonstration, it was found that the method had higher sensitivity and could count bacteria in 3 x 10(2) CFU/mL, lower than the conventional plate counting and organic dye-based method. A linear relationship of the fluorescence peak intensity (Y) and the total bacterial count (X) was established in the range of 3 x 10(2)-10(7) CFU/mL using the equation Y = 374.82X-938.27 (R = 0.99574). The results of the determination for the total count of bacteria in seven real samples were identical with the conventional plate count method, and the standard deviation was satisfactory.

The Effects of Gamma and Proton Radiation Exposure on Hematopoietic Cell Counts in the Ferret Model

PubMed Central

Sanzari, Jenine K.; Wan, X. Steven; Krigsfeld, Gabriel S.; Wroe, Andrew J.; Gridley, Daila S.; Kennedy, Ann R.

2014-01-01

Exposure to total-body radiation induces hematological changes, which can detriment one's immune response to wounds and infection. Here, the decreases in blood cell counts after acute radiation doses of γ-ray or proton radiation exposure, at the doses and dose-rates expected during a solar particle event (SPE), are reported in the ferret model system. Following the exposure to γ-ray or proton radiation, the ferret peripheral total white blood cell (WBC) and lymphocyte counts decreased whereas neutrophil count increased within 3 hours. At 48 hours after irradiation, the WBC, neutrophil, and lymphocyte counts decreased in a dose-dependent manner but were not significantly affected by the radiation type (γ-rays verses protons) or dose rate (0.5 Gy/minute verses 0.5 Gy/hour). The loss of these blood cells could accompany and contribute to the physiological symptoms of the acute radiation syndrome (ARS). PMID:25356435

Microscopic anthropogenic litter in terrestrial birds from Shanghai, China: Not only plastics but also natural fibers.

PubMed

Zhao, Shiye; Zhu, Lixin; Li, Daoji

2016-04-15

The level of contamination by microscopic anthropogenic litter (0.5-5mm) in terrestrial ecosystems is not well understood. After chemical digestion in 10% KOH, microscopic anthropogenic litter from the gastrointestinal tracts of 17 terrestrial birds was identified and categorized under a stereomicroscope based on its physical properties and melting tests. In total, 364 items from 16 birds were identified as microscopic anthropogenic litter, ranging in size from 0.5 to 8.5mm. No relationship between plastic load and body condition was found. Natural fibers, plastic fibers and fragmented plastics represented, respectively, 37.4% (136 items), 54.9% (200 items) and 7.7% (28 items) of total litter items. Small sample sizes limited our ability to draw strong conclusions about the metabolism of natural fibers, but the decline in the proportion of natural fibers from the esophagus to stomach to intestine suggested that they may be digestible. Particles smaller than 5mm represented more than 90% of the total number of pollutant items. Particles with colors in the mid-tones and fibrous shapes were overwhelmingly common particles. The results reflect pollution by microscopic anthropogenic litter in the terrestrial ecosystem of the study area. Microscopic natural fibers, which may disperse and adsorb chemical pollutants differently from microplastic and may pose an even greater risk, are in urgent need of further research. Copyright © 2016 Elsevier B.V. All rights reserved.

Development of an Eye-Safe Micro-Pulse Differential Absorption Lidar (DIAL) for Carbon Dioxide Profilings

NASA Astrophysics Data System (ADS)

Johnson, W.; Repasky, K. S.; Nehrir, A. R.; Carlsten, J.

2011-12-01

A differential absorption lidar (DIAL) for monitoring carbon dioxide (CO2) is under development at Montana State University using commercially available parts. Two distributed feedback (DFB) lasers, one at the on-line wavelength and one at the off-line wavelength are used to injection seed a fiber amplifier. The DIAL operates in the 1.57 micron carbon dioxide absorption band at an on-line wavelength of 1.5714060 microns. The laser transmitter produces 40 μJ pulses with a pulse duration of 1 μs and a pulse repetition frequency of 20 kHz. The scattered light from the laser transmitter is collected using a 28 cm diameter Schmidt-Cassegrain telescope. The light collected by the telescope is collimated and then filtered using a 0.8 nm FWHM narrowband interference filter. After the optical filter, the light is coupled into a multimode optical fiber with a 1000 μm core diameter. The output from the optical fiber is coupled into a photomultiplier tube (PMT) used to monitor the return signal. The analog output from the PMT is next incident on a discriminator producing TTL logic pulses for photon counting. The output from the PMT and discriminator is monitored using a multichannel scalar card allowing the counting of the TTL pulses as a function of range. Data from the DIAL instrument is collected in the following manner. The fiber amplifier is injection seeded first with the on-line DFB laser. The return signal as a function of range is integrated using the multichannel scalar for a user defined time, typically set at 6 s. The off-line DFB laser is then used to injection seed the fiber amplifier and the process is repeated. This process is repeated for a user defined period. The CO2 concentration as a function of range is calculated using the on-line and off-line return signals with the DIAL equation. A comparison of the CO2 concentration measured using the DIAL instrument at 1.5 km and a Li-Cor LI-820 in situ sensor located at 1.5 km from the DIAL over a 2.5 hour period indicate that the CO2 DIAL has an accuracy of ±20 parts per million (PPM).

Guilty by his fibers: suspect confession versus textile fibers reconstructed simulation.

PubMed

Suzuki, Shinichi; Higashikawa, Yoshiyasu; Sugita, Ritsuko; Suzuki, Yasuhiro

2009-08-10

In one particular criminal case involving murder and theft, the arrested suspect admitted to the theft, but denied responsibility for the murder of the inhabitant of the crime scene. In his confession, the suspect stated that he found the victim's body when he broke into the crime scene to commit theft. For this report, the actual crime scene was reconstructed in accordance with the confession obtained during the interrogation of the suspect, and suspect behavior was simulated in accord to the suspect confession. The number of characteristic fibers retrieved from the simulated crime scene was compared with those of retrieved from the actual crime scene. By comparing the distribution and number of characteristic fibers collected in the simulation experiments and the actual investigation, the reliability of the suspect's confession was evaluated. The characteristic dark yellowish-green woolen fibers of the garment that the suspect wore when he entered the crime scene were selected as the target fiber in the reconstruction. The experimental simulations were conducted four times. The distributed target fibers were retrieved using the same type of adhesive tape and the same protocol by the same police officers who conducted the retrieval of the fibers at the actual crime scene. The fibers were identified both through morphological observation and by color comparisons of their ultaviolet-visible transmittance spectra measured with a microspectrophotometer. The fibers collected with the adhesive tape were counted for each area to compare with those collected in the actual crime scene investigation. The numbers of fibers found at each area of the body, mattress and blankets were compared between the simulated experiments and the actual investigation, and a significant difference was found. In particular, the numbers of fibers found near the victim's head were significantly different. As a result, the suspect's confession was not considered to be reliable, as a stronger contact with the victim was demonstrated by our simulations. During the control trial, traditional forensic traces like DNA or fingerprints were mute regarding the suspect's says. At the opposite, the fiber intelligence was highly significant to explain the suspect's behavior at the crime scene. The fiber results and simulations were presented at the court and the man was subsequently found guilty not only of theft and trespassing but also murder.

Digital computing cardiotachometer

NASA Technical Reports Server (NTRS)

Smith, H. E.; Rasquin, J. R.; Taylor, R. A. (Inventor)

1973-01-01

A tachometer is described which instantaneously measures heart rate. During the two intervals between three succeeding heart beats, the electronic system: (1) measures the interval by counting cycles from a fixed frequency source occurring between the two beats; and (2) computes heat rate during the interval between the next two beats by counting the number of times that the interval count must be counted to zero in order to equal a total count of sixty times (to convert to beats per minute) the frequency of the fixed frequency source.

Advanced risk assessment of the effects of graphite fibers on electronic and electric equipment

NASA Technical Reports Server (NTRS)

Pocinki, L.; Cornell, M.; Kaplan, L.

1980-01-01

An assessment of the risk associated with accidents involving aircraft with carbon fiber composite structural components is examined. The individual fiber segments cause electrical and electronic equipment to fail under certain operating conditions. A Monte Carlo simulation model was used to computer the risk. Aircraft accidents with fire, release of carbon fiber material, entrainment of carbon fibers in a smoke plume transport of fibers downwind, transfer of some fibers/into the the interior of buildings, failures of electrical and electronic equipment, and economic impact of failures are discussed. Risk profiles were prepared for individual airports and the Nation. The vulnerability of electrical transmission equipment to carbon fiber incursion and aircraft accident total costs is investigated.

Single-photon counting multicolor multiphoton fluorescence microscope.

PubMed

Buehler, Christof; Kim, Ki H; Greuter, Urs; Schlumpf, Nick; So, Peter T C

2005-01-01

We present a multicolor multiphoton fluorescence microscope with single-photon counting sensitivity. The system integrates a standard multiphoton fluorescence microscope, an optical grating spectrograph operating in the UV-Vis wavelength region, and a 16-anode photomultiplier tube (PMT). The major technical innovation is in the development of a multichannel photon counting card (mC-PhCC) for direct signal collection from multi-anode PMTs. The electronic design of the mC-PhCC employs a high-throughput, fully-parallel, single-photon counting scheme along with a high-speed electrical or fiber-optical link interface to the data acquisition computer. There is no electronic crosstalk among the detection channels of the mC-PhCC. The collected signal remains linear up to an incident photon rate of 10(8) counts per second. The high-speed data interface offers ample bandwidth for real-time readout: 2 MByte lambda-stacks composed of 16 spectral channels, 256 x 256 pixel image with 12-bit dynamic range can be transferred at 30 frames per second. The modular design of the mC-PhCC can be readily extended to accommodate PMTs of more anodes. Data acquisition from a 64-anode PMT has been verified. As a demonstration of system performance, spectrally resolved images of fluorescent latex spheres and ex-vivo human skin are reported. The multicolor multiphoton microscope is suitable for highly sensitive, real-time, spectrally-resolved three-dimensional imaging in biomedical applications.

42 CFR Appendix E to Part 5 - Criteria for Designation of Areas Having Shortages of Podiatric Professional(s)

Code of Federal Regulations, 2010 CFR

2010-10-01

... their time to foot care, the total available foot care practitioners will be computed as follows: Number... for the delivery of podiatric services. 2. The area's ratio of population to foot care practitioners... Count. The population count used will be the total permanent resident civilian population of the area...

Importance of protein rich components in the emulsifying properties of corn fiber gum

USDA-ARS?s Scientific Manuscript database

Purified corn fiber gum (CFG-F) isolated from "fine" (kernel endosperm-derived) corn fiber that contained about 2% residual protein was extracted with 70% aqueous ethanol. The aqueous ethanol extract (AEE), which contained 19.5% of the total CFG, contained a high percentage of the proteinaceous ma...

How to Tell How Important Agriculture Is to Your State.

ERIC Educational Resources Information Center

Schluter, Gerald; Edmondson, William

1986-01-01

Emphasizes agriculture's economic importance and lists the top 10 states according to 4 possible criteria for determining economic dependence on agriculture: number of food and fiber system jobs, number of farmworkers, proportion of food and fiber system jobs, and proportion of farmworkers to total food and fiber system jobs. (JHZ)

Monitoring liquid and solid content in froth using conductivity

Treesearch

J.Y. Zhu; F. Tan; R. Gleisner

2005-01-01

This study reports the feasibility of monitoring liquid and fiber rejection during froth flotation of fiber suspensions through conductivity measurements of the rejected froth. The technique was demonstrated in laboratory flotation experiments using nylon and wood fiber suspensions in two laboratory flotation cells. We found that both the total wet rejection and the...

Development of secondary cell wall in cotton fibers as examined with Fourier transform-infrared spectroscopy

USDA-ARS?s Scientific Manuscript database

Our presentation will focus on continuing efforts to examine secondary cell wall development in cotton fibers using infrared Spectroscopy. Cotton fibers harvested at 18, 20, 24, 28, 32, 36 and 40 days after flowering were examined using attenuated total reflection Fourier transform-infrared (ATR FT-...

Characterization of aerosols and fibers emitted from composite materials combustion.

PubMed

Chivas-Joly, C; Gaie-Levrel, F; Motzkus, C; Ducourtieux, S; Delvallée, A; De Lagos, F; Nevé, S Le; Gutierrez, J; Lopez-Cuesta, J-M

2016-01-15

This work investigates the aerosols emitted during combustion of aircraft and naval structural composite materials (epoxy resin/carbon fibers and vinyl ester/glass fibers and carbon nanotubes). Combustion tests were performed at lab-scale using a modified cone calorimeter. The aerosols emitted have been characterized using various metrological devices devoted to the analysis of aerosols. The influence of the nature of polymer matrices, the incorporation of fibers and carbon nanotubes as well as glass reinforcements on the number concentration and the size distribution of airborne particles produced, was studied in the 5 nm-10 μm range. Incorporation of carbon fibers into epoxy resin significantly reduced the total particle number concentration. In addition, the interlaced orientation of carbon fibers limited the particles production compared to the composites with unidirectional one. The carbon nanotubes loading in vinyl ester resin composites influenced the total particles production during the flaming combustion with changes during kinetics emission. Predominant populations of airborne particles generated during combustion of all tested composites were characterized by a PN50 following by PN(100-500). Copyright © 2015 Elsevier B.V. All rights reserved.

[Soluble and insoluble dietary fiber in cereals and legumes cultivated in Chile].

PubMed

Pak, N; Ayala, C; Vera, G; Pennacchiotti, I; Araya, H

1990-03-01

Insoluble, soluble and total dietary fiber (DF) were determined in 35 varieties of certified whole seeds (without processing) of cereals (rice, oat, rye, and wheat) and legumes (pea, cowpea, beans, chikpea, lentil and lupine). The enzymatic method of Asp, Johansson and Siljestrom was used, with modifications in relation to time of incubation with alpha amylase, filtration system and volumes of the filtrates. Results were expressed as g/100 g dry weight. Total DF for cereals showed a range from 10.1 (wheat var. Chasqui) to 22.2 (rice var Quella). Rye, var. Tetra Baer and oats var. Pony Baer presented the highest soluble fiber content (3.3 and 3.9, respectively). In legumes, total DF fluctuated between 12.7 (pea, var. yellow) and 36.6 (lupine, var. Multolupa). Bean, var. Pinto INIA and lupine var. Multolupa presented the highest soluble fiber values (5.8 for both). Based on the results of this research work, it might be concluded that great variation exists in regard to the amount of total soluble and insoluble DF in cereals and legumes, a fact which impedes generalization as to its content in each food item.

Effects of a specific blend of essential oils on apparent nutrient digestion, rumen fermentation and rumen microbial populations in sheep fed a 50:50 alfalfa hay:concentrate diet

PubMed Central

Khateri, N.; Azizi, O.; Jahani-Azizabadi, H.

2017-01-01

Objective An experiment was conducted to investigate the effects of a specific mixture of essential oils (MEO), containing thyme, clove and cinnamon EO, on rumen microbial fermentation, nutrient apparent digestibility and blood metabolites in fistulated sheep. Methods Six sheep fitted with ruminal fistulas were used in a repeated measurement design with two 24-d periods to investigate the effect of adding MEO at 0 (control), 0.8, and 1.6 mL/d on apparent nutrient digestibility, rumen fermentation characteristics, rumen microbial population and blood chemical metabolites. Animals were fed with a 50:50 alfalfa hay:concentrate diet. Results Ruminal pH, total volatile fatty acids (VFA) concentration, molar proportion of individual VFA, acetate: propionate ratio and methane production were not affected with MEO. Relative to the control, Small peptides plus amino acid nitrogen and large peptides nitrogen concentration in rumen fluid were not affected with MEO supplementation; while, rumen fluid ammonia nitrogen concentration at 0 and 6 h after morning feeding in sheep fed with 1.6 mL/d of MEO was lower (p<0.05) compared to the control and 0.8 mL/d of MEO. At 0 h after morning feeding, ammonia nitrogen concentration was higher (p<0.05) in sheep fed 0.8 mL/d of MEO relative to 1.6 mL/d and control diet. Ruminal protozoa and hyper ammonia producing (HAP) bacteria counts were not affected by addition of MEO in the diet. Relative to the control, no changes were observed in the red and white blood cells, hemoglobin, hematocrit, glucose, beta-hydroxybutyric acid, cholesterol, total protein, albumin, blood urea nitrogen and aspartate aminotransferase and alanine aminotransferase concentration. Apparent total tract digestibility of dry matter, crude proten, organic matter, and neutral detergent fiber were not influenced by MEO supplementation. Conclusion The results of the present study suggested that supplementation of MEO may have limited effects on apparent nutrient digestibility, ruminal fermentation and protozoa and HAP bacteria count, blood cells and metabolites. PMID:28249376

Constant Fiber Number During Skeletal Muscle Atrophy and Modified Arachidonate Metabolism During Hypertrophy

NASA Technical Reports Server (NTRS)

Templeton, G.

1985-01-01

A previously documented shift from Type I to IIA predominance of the soleus muscle during rat suspension was further investigated to determine if this shift was by selective reduction of a single fiber type, simultaneous reduction and formation of fibers with different fiber types, or a transformation of fiber type by individual fibers. By partial acid digestion and dissection, average total soleus fiber number was found to be 3022 + or - 80 (SE) and 3008 + or - 64 before and after four-week suspension (n=12). Another area of current research was based on previous studies which indicate that prostaglandins are biosynthesized by skeletal muscle and evoke protein synthesis and degradation.

Improved nutrient intake in older obese adults undergoing a structured diet and exercise intentional weight loss program.

PubMed

Miller, G D

2010-06-01

Physicians are often reluctant to advise older obese patients to lose weight for fear of compromised nutrition and excessive loss of muscle mass and strength, all of which may lead to a loss of independence and accelerate disability. Therefore, the purpose of this study was to examine nutrient intake in older obese adults undergoing a weight loss intervention. The study setting was at a university research facility. A total of 71 participants (age, 69.5 (SD = 5.8) yrs; 62% female; BMI, 34.6 (4.4) kg/m2) were recruited. Individuals were randomized into either a weight stable (WS) control group or an intensive weight loss (WL) group. The WL intervention was for 6 months and utilized partial meal replacements (PMR) and a facility-based 3 d/wk, 60 min/session exercise training program encompassing both aerobic and strength exercises. Weight loss goal for WL was 10% from baseline at 6-months. Variables were obtained at baseline and 6-months and included 3 day dietary records along with daily step counts for 7 days. Total energy, macronutrients (g and % of energy), micronutrients (vitamins and minerals), as well as use of PMR were assessed from the diet records. Body mass and body fat (g and % of body mass) were determined at the 2 time points. Estimated marginal means (SEM) for weight loss at 6-months was -8.8 (0.7)% for WL and -0.1 (0.7)% for WS. Daily energy intake at 6-months was lower for WL (1396 (64) kcals) compared to WS (1817 (71) kcals). Additionally, those in the WL group (compared to WS) had lower intakes of total fat (27.5 (1.2)%, WL vs. 36.1 (4.6)%, WS) and saturated fatty acids (8.5 (0.4)% vs. 10.8 (0.5)%), and had higher levels of carbohydrates (57.6 (1.5)% vs. 49.0 (1.7)%), protein (18.4 (0.5% vs. 16.2 (0.6)%), and dietary fiber (21.0 (0.9) g vs. 17.4 (1.0) g) at 6-months. Even with reduced total calorie intake, key micronutrients (calcium, iron, vitamin D, vitamin E, vitamin C) were higher for WL vs. WS at 6-months. Total daily step counts were higher for WL vs. WS at 6-months. A nutrition intervention to promote weight loss in older obese adults was achieved using PMR as a primary strategy. Diet quality was improved for WL vs. WS in using the nutrient fortified product, even with a reduction in total energy intake.

Utilization of by-products from the tequila industry. Part 2: Potential value of Agave tequilana Weber azul leaves.

PubMed

Iñiguez-Covarrubias, G; Díaz-Teres, R; Sanjuan-Dueñas, R; Anzaldo-Hernández, J; Rowell, R M

2001-04-01

The leaves of the agave plant are left in the field after harvesting the heads for tequila production. Different types of agave leaves were isolated, classified, and their content in the total plant determined. The usable fractions were collected and their properties determined. Of the total wet weight of the agave plant, 54% corresponds to the agave head, 32% corresponds to materials which could be usable for sugar and fiber production which leaves 14% of the wet plant without apparent utility. The fractions with higher total reducing sugars (TRS) content were the fresh fraction of partially dry leaves stuck to the head and the leaf bases with a TRS content of 16.1% and 13.1%, respectively. The highest TRS concentration (16-28%) is in the agave head which is used for tequila production. The leaves are 90-120 cm long and 8-12 cm wide and contain fiber bundles that are 23-52 cm long and 0.6-13 mm wide. The ultimate fiber length is approximately 1.6 mm with an average width of 25 microns. There are several types of leaf fibers that can be utilized depending on what part of the plant they come from and what product is desired. Agave leaf fibers were pulped using a soda pulping process and the pulp was hand formed into test sheets. Test sheets made from pulped agave leaf fibers had a breaking length comparable to paper made from both pine and eucalyptus fibers, but the tear index and burst index were lower than the other two papers.

A Fiber-Optic Current Sensor for Lightning Measurement Applications

NASA Technical Reports Server (NTRS)

Nguyen, Truong X.; Ely, Jay J.; Szatkowski, George N.

2015-01-01

An optical-fiber sensor based on Faraday Effect is developed for measuring total lightning electric current. It has many unique capabilities not possible with traditional current sensors. Designed for aircraft installation, the sensor is lightweight, non-conducting, structure-conforming, and is immune to electromagnetic interference, hysteresis and saturation. It can also be used on windmills, lightning towers, and can help validate lightning detection network measurements. Faraday Effect causes light polarization to rotate when the fiber is exposed to a magnetic field in the direction of light propagation. Thus, the magnetic field strength can be determined from the light polarization change. By forming closed fiber loops and applying Ampere's law, measuring the total light rotation yields the total current enclosed. The broadband, dual-detector, reflective polarimetric scheme allows measurement of both DC component and AC waveforms with about 60 dB dynamic range. Three sensor systems were built with different sensitivities from different laser wavelengths. Operating at 850nm, the first system uses twisted single-mode fiber and has a 150 A - 150 KA range. The second system operates at 1550nm, uses spun polarization maintaining fiber, and can measure 400 A - 400 KA. Both systems were validated with rocket-triggered lightning measurements and achieved excellent results when compared to a resistive shunt. The third system operates at 1310nm, uses spun polarization maintaining fiber, and can measure approximately 300 A - 300 KA. High current measurements up to 200 KA were demonstrated at a commercial lightning test facility. The system was recently installed on an aircraft and flown near icing weather conditions.

A fiber-optic current sensor for lightning measurement applications

NASA Astrophysics Data System (ADS)

Nguyen, Truong X.; Ely, Jay J.; Szatkowski, George N.

2015-05-01

An optical-fiber sensor based on Faraday Effect is developed for measuring total lightning electric current. It has many unique capabilities not possible with traditional current sensors. Designed for aircraft installation, the sensor is lightweight, non-conducting, structure-conforming, and is immune to electromagnetic interference, hysteresis and saturation. It can also be used on windmills, lightning towers, and can help validate lightning detection network measurements. Faraday Effect causes light polarization to rotate when the fiber is exposed to a magnetic field in the direction of light propagation. Thus, the magnetic field strength can be determined from the light polarization change. By forming closed fiber loops and applying Ampere's law, measuring the total light rotation yields the total current enclosed. The broadband, dual-detector, reflective polarimetric scheme allows measurement of both DC component and AC waveforms with about 60 dB dynamic range. Three sensor systems were built with different sensitivities from different laser wavelengths. Operating at 850nm, the first system uses twisted single-mode fiber and has a 150 A - 150 KA range. The second system operates at 1550nm, uses spun polarization maintaining fiber, and can measure 400 A - 400 KA. Both systems were validated with rocket-triggered lightning measurements and achieved excellent results when compared to a resistive shunt. The third system operates at 1310nm, uses spun polarization maintaining fiber, and can measure approximately 300 A - 300 KA. High current measurements up to 200 KA were demonstrated at a commercial lightning test facility. The system was recently installed on an aircraft and flown near icing weather conditions.

Fluorometric determination of the DNA concentration in municipal drinking water.

PubMed Central

McCoy, W F; Olson, B H

1985-01-01

DNA concentrations in municipal drinking water samples were measured by fluorometry, using Hoechst 33258 fluorochrome. The concentration, extraction, and detection methods used were adapted from existing techniques. The method is reproducible, fast, accurate, and simple. The amounts of DNA per cell for five different bacterial isolates obtained from drinking water samples were determined by measuring DNA concentration and total cell concentration (acridine orange epifluorescence direct cell counting) in stationary pure cultures. The relationship between DNA concentration and epifluorescence total direct cell concentration in 11 different drinking water samples was linear and positive; the amounts of DNA per cell in these samples did not differ significantly from the amounts in pure culture isolates. We found significant linear correlations between DNA concentration and colony-forming unit concentration, as well as between epifluorescence direct cell counts and colony-forming unit concentration. DNA concentration measurements of municipal drinking water samples appear to monitor changes in bacteriological quality at least as well as total heterotrophic plate counting and epifluorescence direct cell counting. PMID:3890737

Hematological and plasma biochemical reference ranges of Alaskan seabirds: Their ecological significance and clinical importance

USGS Publications Warehouse

Newman, S.H.; Piatt, John F.; White, J.

1997-01-01

Blood was analyzed from 151 pelagic marine birds to establish reference ranges for hematological and plasma biochemical parameters from healthy, wild populations of Pacific seabirds. Of the 13 species examined, 9 were from the Family Alcidae (N = 122 individuals) and the remainder (N = 29) from the Families Phalacrocoracidae, Laridae, and Procellariidae. Three of 8 hematological parameters (total white blood cell count, lymphocyte count and eosinophil count) differed significantly among species, as did 9 of 13 plasma biochemical parameters (alkaline phosphatase, aspartate aminotransferase, creatine kinase, cholesterol, glucose, lactate dehydrogenase, total bilirubin, total protein and field total protein). There were no differences among species for packed cell volume, buffy coat, cell counts of heterophils, monocytes and basophils, or for concentrations of alanine aminotransferase, triglycerides, uric acid and calcium. Plasma calcium concentration, triglyceride levels and field total protein varied significantly between sexes, with females having higher mean concentrations of all 3 parameters. However, no significant relationships between measures of breeding condition (brood patch size, subcutaneous and mesenteric fat deposits, or ovarian follicle size and ovary weight) and calcium or alkaline phosphatase concentrations in female birds could be identified. Alanine aminotransferase and uric acid were the only analytes which did not differ significantly between species or sexes.

Enumeration of total aerobic microorganisms in foods by SimPlate Total Plate Count-Color Indicator methods and conventional culture methods: collaborative study.

PubMed

Feldsine, Philip T; Leung, Stephanie C; Lienau, Andrew H; Mui, Linda A; Townsend, David E

2003-01-01

The relative efficacy of the SimPlate Total Plate Count-Color Indicator (TPC-CI) method (SimPlate 35 degrees C) was compared with the AOAC Official Method 966.23 (AOAC 35 degrees C) for enumeration of total aerobic microorganisms in foods. The SimPlate TPC-CI method, incubated at 30 degrees C (SimPlate 30 degrees C), was also compared with the International Organization for Standardization (ISO) 4833 method (ISO 30 degrees C). Six food types were analyzed: ground black pepper, flour, nut meats, frozen hamburger patties, frozen fruits, and fresh vegetables. All foods tested were naturally contaminated. Nineteen laboratories throughout North America and Europe participated in the study. Three method comparisons were conducted. In general, there was <0.3 mean log count difference in recovery among the SimPlate methods and their corresponding reference methods. Mean log counts between the 2 reference methods were also very similar. Repeatability (Sr) and reproducibility (SR) standard deviations were similar among the 3 method comparisons. The SimPlate method (35 degrees C) and the AOAC method were comparable for enumerating total aerobic microorganisms in foods. Similarly, the SimPlate method (30 degrees C) was comparable to the ISO method when samples were prepared and incubated according to the ISO method.

Investigation of the Performance of an Ultralow-Dark-Count Superconducting Nanowire Single-Photon Detector

NASA Astrophysics Data System (ADS)

Subashchandran, Shanthi; Okamoto, Ryo; Zhang, Labao; Tanaka, Akira; Okano, Masayuki; Kang, Lin; Chen, Jian; Wu, Peiheng; Takeuchi, Shigeki

2013-10-01

The realization of an ultralow-dark-count rate (DCR) along with the conservation of high detection efficiency (DE) is critical for many applications using single photon detectors in quantum information technologies, material sciences, and biological sensing. For this purpose, a fiber-coupled superconducting nanowire single-photon detector (SNSPD) with a meander-type niobium nitride nanowire (width: 50 nm) is studied. Precise measurements of the bias current dependence of DE are carried out for a wide spectral range (from 500 to 1650 nm in steps of 50 nm) using a white light source and a laser line Bragg tunable band-pass filter. An ultralow DCR (0.0015 cps) and high DE (32%) are simultaneously achieved by the SNSPD at a wavelength of 500 nm.

Characterizing energy dependence and count rate performance of a dual scintillator fiber-optic detector for computed tomography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoerner, Matthew R., E-mail: mrh5038@ufl.edu; Stepusin, Elliott J.; Hyer, Daniel E.

Purpose: Kilovoltage (kV) x-rays pose a significant challenge for radiation dosimetry. In the kV energy range, even small differences in material composition can result in significant variations in the absorbed energy between soft tissue and the detector. In addition, the use of electronic systems in light detection has demonstrated measurement losses at high photon fluence rates incident to the detector. This study investigated the feasibility of using a novel dual scintillator detector and whether its response to changes in beam energy from scatter and hardening is readily quantified. The detector incorporates a tissue-equivalent plastic scintillator and a gadolinium oxysulfide scintillator,more » which has a higher sensitivity to scatter x-rays. Methods: The detector was constructed by coupling two scintillators: (1) small cylindrical plastic scintillator, 500 μm in diameter and 2 mm in length, and (2) 100 micron sheet of gadolinium oxysulfide 500 μm in diameter, each to a 2 m long optical fiber, which acts as a light guide to transmit scintillation photons from the sensitive element to a photomultiplier tube. Count rate linearity data were obtained from a wide range of exposure rates delivered from a radiological x-ray tube by adjusting the tube current. The data were fitted to a nonparalyzable dead time model to characterize the time response. The true counting rate was related to the reference free air dose air rate measured with a 0.6 cm{sup 3} Radcal{sup ®} thimble chamber as described in AAPM Report No. 111. Secondary electron and photon spectra were evaluated using Monte Carlo techniques to analyze ionization quenching and photon energy-absorption characteristics from free-in-air and in phantom measurements. The depth/energy dependence of the detector was characterized using a computed tomography dose index QA phantom consisting of nested adult head and body segments. The phantom provided up to 32 cm of acrylic with a compatible 0.6 cm{sup 3} calibrated ionization chamber to measure the reference air kerma. Results: Each detector exhibited counting losses of 5% when irradiated at a dose rate of 26.3 mGy/s (Gadolinium) and 324.3 mGy/s (plastic). The dead time of the gadolinium oxysulfide detector was determined to be 48 ns, while the dead time of the plastic scintillating detector was unable to accurately be calculated due to poor counting statistics from low detected count rates. Noticeable depth/energy dependence was observed for the plastic scintillator for depths greater than 16 cm of acrylic that was not present for measurements using the gadolinium oxysulfide scintillator, leading us to believe that quenching may play a larger role in the depth dependence of the plastic scintillator than the incident x-ray energy spectrum. When properly corrected for dead time effects, the energy response of the gadolinium oxysulfide scintillator is consistent with the plastic scintillator. Using the integrated dual detector method was superior to each detector individually as the depth-dependent measure of dose was correctable to less than 8% between 100 and 135 kV. Conclusions: The dual scintillator fiber-optic detector accommodates a methodology for energy dependent corrections of the plastic scintillator, improving the overall accuracy of the dosimeter across the range of diagnostic energies.« less

Characterizing energy dependence and count rate performance of a dual scintillator fiber-optic detector for computed tomography.

PubMed

Hoerner, Matthew R; Stepusin, Elliott J; Hyer, Daniel E; Hintenlang, David E

2015-03-01

Kilovoltage (kV) x-rays pose a significant challenge for radiation dosimetry. In the kV energy range, even small differences in material composition can result in significant variations in the absorbed energy between soft tissue and the detector. In addition, the use of electronic systems in light detection has demonstrated measurement losses at high photon fluence rates incident to the detector. This study investigated the feasibility of using a novel dual scintillator detector and whether its response to changes in beam energy from scatter and hardening is readily quantified. The detector incorporates a tissue-equivalent plastic scintillator and a gadolinium oxysulfide scintillator, which has a higher sensitivity to scatter x-rays. The detector was constructed by coupling two scintillators: (1) small cylindrical plastic scintillator, 500 μm in diameter and 2 mm in length, and (2) 100 micron sheet of gadolinium oxysulfide 500 μm in diameter, each to a 2 m long optical fiber, which acts as a light guide to transmit scintillation photons from the sensitive element to a photomultiplier tube. Count rate linearity data were obtained from a wide range of exposure rates delivered from a radiological x-ray tube by adjusting the tube current. The data were fitted to a nonparalyzable dead time model to characterize the time response. The true counting rate was related to the reference free air dose air rate measured with a 0.6 cm(3) Radcal(®) thimble chamber as described in AAPM Report No. 111. Secondary electron and photon spectra were evaluated using Monte Carlo techniques to analyze ionization quenching and photon energy-absorption characteristics from free-in-air and in phantom measurements. The depth/energy dependence of the detector was characterized using a computed tomography dose index QA phantom consisting of nested adult head and body segments. The phantom provided up to 32 cm of acrylic with a compatible 0.6 cm(3) calibrated ionization chamber to measure the reference air kerma. Each detector exhibited counting losses of 5% when irradiated at a dose rate of 26.3 mGy/s (Gadolinium) and 324.3 mGy/s (plastic). The dead time of the gadolinium oxysulfide detector was determined to be 48 ns, while the dead time of the plastic scintillating detector was unable to accurately be calculated due to poor counting statistics from low detected count rates. Noticeable depth/energy dependence was observed for the plastic scintillator for depths greater than 16 cm of acrylic that was not present for measurements using the gadolinium oxysulfide scintillator, leading us to believe that quenching may play a larger role in the depth dependence of the plastic scintillator than the incident x-ray energy spectrum. When properly corrected for dead time effects, the energy response of the gadolinium oxysulfide scintillator is consistent with the plastic scintillator. Using the integrated dual detector method was superior to each detector individually as the depth-dependent measure of dose was correctable to less than 8% between 100 and 135 kV. The dual scintillator fiber-optic detector accommodates a methodology for energy dependent corrections of the plastic scintillator, improving the overall accuracy of the dosimeter across the range of diagnostic energies.

Tower counts

USGS Publications Warehouse

Woody, Carol Ann; Johnson, D.H.; Shrier, Brianna M.; O'Neal, Jennifer S.; Knutzen, John A.; Augerot, Xanthippe; O'Neal, Thomas A.; Pearsons, Todd N.

2007-01-01

Counting towers provide an accurate, low-cost, low-maintenance, low-technology, and easily mobilized escapement estimation program compared to other methods (e.g., weirs, hydroacoustics, mark-recapture, and aerial surveys) (Thompson 1962; Siebel 1967; Cousens et al. 1982; Symons and Waldichuk 1984; Anderson 2000; Alaska Department of Fish and Game 2003). Counting tower data has been found to be consistent with that of digital video counts (Edwards 2005). Counting towers do not interfere with natural fish migration patterns, nor are fish handled or stressed; however, their use is generally limited to clear rivers that meet specific site selection criteria. The data provided by counting tower sampling allow fishery managers to determine reproductive population size, estimate total return (escapement + catch) and its uncertainty, evaluate population productivity and trends, set harvest rates, determine spawning escapement goals, and forecast future returns (Alaska Department of Fish and Game 1974-2000 and 1975-2004). The number of spawning fish is determined by subtracting subsistence, sport-caught fish, and prespawn mortality from the total estimated escapement. The methods outlined in this protocol for tower counts can be used to provide reasonable estimates ( plus or minus 6%-10%) of reproductive salmon population size and run timing in clear rivers. 

Comparison of line transects and point counts for monitoring spring migration in forested wetlands

USGS Publications Warehouse

Wilson, R.R.; Twedt, D.J.; Elliott, A.B.

2000-01-01

We compared the efficacy of 400-m line transects and sets of three point counts at detecting avian richness and abundance in bottomland hardwood forests and intensively managed cottonwood (Populus deltoides) plantations within the Mississippi Alluvial Valley. We detected more species and more individuals on line transects than on three point counts during 218 paired surveys conducted between 24 March and 3 June, 1996 and 1997. Line transects also yielded more birds per unit of time, even though point counts yielded higher estimates of relative bird density. In structurally more-complex bottomland hardwood forests, we detected more species and individuals on line transects, but in more-open cottonwood plantations, transects surpassed point counts only at detecting species within 50 m of the observer. Species richness and total abundance of Nearctic-Neotropical migrants and temperate migrants were greater on line transects within bottomland hardwood forests. Within cottonwood plantations, however, only species richness of Nearctic-Neotropical migrants and total abundance of temperate migrants were greater on line transects. Because we compared survey techniques using the same observer, within the same forest stand on a given day, we assumed that the technique yielding greater estimates of avian species richness and total abundance per unit of effort is superior. Thus, for monitoring migration within hardwood forests of the Mississippi Alluvial Valley, we recommend using line transects instead of point counts.

Measurement of total-body cobalt-57 vitamin B12 absorption with a gamma camera.

PubMed

Cardarelli, J A; Slingerland, D W; Burrows, B A; Miller, A

1985-08-01

Previously described techniques for the measurement of the absorption of [57Co]vitamin B12 by total-body counting have required an iron room equipped with scanning or multiple detectors. The present study uses simplifying modifications which make the technique more available and include the use of static geometry, the measurement of body thickness to correct for attenuation, a simple formula to convert the capsule-in-air count to a 100% absorption count, and finally the use of an adequately shielded gamma camera obviating the need of an iron room.

Microplastics in the Southern Ocean.

PubMed

Isobe, Atsuhiko; Uchiyama-Matsumoto, Kaori; Uchida, Keiichi; Tokai, Tadashi

2017-01-15

A field survey to collect microplastics with sizes <5mm was conducted in the Southern Ocean in 2016. We performed five net-tows and collected 44 pieces of plastic. Total particle counts of the entire water column, which is free of vertical mixing, were computed using the surface concentration (particle count per unit seawater volume) of microplastics, wind speed, and significant wave height during the observation period. Total particle counts at two stations near Antarctica were estimated to be in the order of 100,000pieceskm -2 . Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Energy in elastic fiber embedded in elastic matrix containing incident SH wave

NASA Technical Reports Server (NTRS)

Williams, James H., Jr.; Nagem, Raymond J.

1989-01-01

A single elastic fiber embedded in an infinite elastic matrix is considered. An incident plane SH wave is assumed in the infinite matrix, and an expression is derived for the total energy in the fiber due to the incident SH wave. A nondimensional form of the fiber energy is plotted as a function of the nondimensional wavenumber of the SH wave. It is shown that the fiber energy attains maximum values at specific values of the wavenumber of the incident wave. The results obtained here are interpreted in the context of phenomena observed in acousto-ultrasonic experiments on fiber reinforced composite materials.

Characterization of silver halide fiber optics and hollow silica waveguides for use in the construction of a mid-infrared attenuated total reflection fourier transform infrared (ATR FT-IR) spectroscopy probe.

PubMed

Damin, Craig A; Sommer, André J

2013-11-01

Advances in fiber optic materials have allowed for the construction of fibers and waveguides capable of transmitting infrared radiation. An investigation of the transmission characteristics associated with two commonly used types of infrared-transmitting fibers/waveguides for prospective use in a fiber/waveguide-coupled attenuated total internal reflection (ATR) probe was performed. Characterization of silver halide polycrystalline fiber optics and hollow silica waveguides was done on the basis of the transmission of infrared light using a conventional fiber optic coupling accessory and an infrared microscope. Using the fiber optic coupling accessory, the average percent transmission for three silver halide fibers was 18.1 ± 6.1% relative to a benchtop reflection accessory. The average transmission for two hollow waveguides (HWGs) using the coupling accessory was 8.0 ± 0.3%. (Uncertainties in the relative percent transmission represent the standard deviations.) Reduced transmission observed for the HWGs was attributed to the high numerical aperture of the coupling accessory. Characterization of the fibers/waveguides using a zinc selenide lens objective on an infrared microscope indicated 24.1 ± 7.2% of the initial light input into the silver halide fibers was transmitted. Percent transmission obtained for the HWGs was 98.7 ± 0.1%. Increased transmission using the HWGs resulted from the absence or minimization of insertion and scattering losses due to the hollow air core and a better-matched numerical aperture. The effect of bending on the transmission characteristics of the fibers/waveguides was also investigated. Significant deviations in the transmission of infrared light by the solid-core silver halide fibers were observed for various bending angles. Percent transmission greater than 98% was consistently observed for the HWGs at the bending angles. The combined benefits of high percent transmission, reproducible instrument responses, and increased bending tolerance indicated HWGs should be preferred in the construction of a fiber/waveguide-coupled ATR probe.

Validation of an approach to predict total-tract fiber digestibility using a standardized in vitro technique for different diets fed to high-producing dairy cows.

PubMed

Lopes, F; Ruh, K; Combs, D K

2015-04-01

The experimental objective was to validate an in vitro model to predict total-tract neutral detergent fiber (NDF) digestibility in dairy cattle. Twenty-one diets from 7 studies conducted at University of Wisconsin-Madison were analyzed for in vitro fiber digestibility. Forages varied among diets (corn, alfalfa, tall and meadow fescue, and wheat straw silages) and nutrient composition (ranges: NDF = 22.5 to 33.8%; crude protein = 15.8 to 18.9%; nonfiber carbohydrates = 38.0 to 51.0%). Total-tract NDF digestibility (TTNDFD) observed in in vivo trials was determined using different markers as described in the individual studies. The in vitro TTNDFD model predicted total-tract fiber digestibility from the proportion of total NDF potentially digestible (pdNDF), rate of pdNDF degradation, and rate of passage of pdNDF. The model predicted TTNDFD similar to in vivo measurements. The relationship between TTNDFD measured in vivo and TTNDFD predicted by the in vitro assay was significant (R(2) = 0.68). The relationship between in vitro 30-h NDF digestibility values and in vivo total-tract NDF digestibility values was not significant, whereas in vitro 48-h NDF digestibility values were correlated (R(2) = 0.30) with in vivo TTNDFD measurements. Indigestible NDF (iNDF) showed a negative relationship (R(2) = 0.40) with TTNDFD in vivo. Each 1-percentage-unit increase of iNDF resulted in a decrease of 0.96 percentage units of total-tract NDF digestibility; however, iNDF by itself was not a good predictor of TTNDFD because of the difference among the means. This study showed that an in vitro TTNDFD model that uses iNDF, pdNDF, and rates of pdNDF digestion and passage can predict (R(2) = 0.68) total-tract NDF digestibility. Most importantly, we demonstrated the ability to predict total-tract fiber digestibility from a model based on in vitro NDF degradation, which could improve our ability to optimize forage utilization and milk production. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Pulmonary cellular effects in rats following aerosol exposures to ultrafine Kevlar aramid fibrils: evidence for biodegradability of inhaled fibrils.

PubMed

Warheit, D B; Kellar, K A; Hartsky, M A

1992-10-01

Previous chronic inhalation studies have shown that high concentrations of Kevlar fibrils produced fibrosis and cystic keratinizing tumors in rats following 2-year inhalation exposures. The current studies were undertaken to evaluate mechanisms and to assess the toxicity of inhaled Kevlar fibrils relative to other reference materials. Rats were exposed to ultrafine Kevlar fibers (fibrils) for 3 or 5 days at concentrations ranging from 600-1300 fibers/cc (gravimetric concentrations ranging from 2-13 mg/m3). A complete characterization of the fiber aerosol and dose was carried out. These measurements included gravimetric concentrations, mass median aerodynamic diameter, fiber number, and count median lengths and diameters of the aerosol. Following exposures, cells and fluids from groups of sham- and fiber-exposed animals were recovered by bronchoalveolar lavage (BAL). Alkaline phosphatase, lactate dehydrogenase (LDH), protein, and N-acetyl glucosaminidase (NAG) values were measured in BAL fluids at several time points postexposure. Alveolar macrophages were cultured and studied for morphology, chemotaxis, and phagocytosis by scanning electron microscopy. The lungs of additional exposed animals were processed for deposition, cell labeling, retained dose, and lung clearance studies, as well as fiber dimensions (from digested lung tissue), histopathology, and transmission electron microscopy. Five-day exposures to Kevlar fibrils elicited a transient granulocytic inflammatory response with concomitant increases in BAL fluid levels of alkaline phosphatase, NAG, LDH, and protein. Unlike the data from silica and asbestos exposures where inflammation persisted, biochemical parameters returned to control levels at time intervals between 1 week and 1 month postexposure. Macrophage function in Kevlar-exposed alveolar macrophages was not significantly different from sham controls at any time period. Cell labeling studies were carried out immediately after exposure, as well as 1 week and 1 month postexposure. Increased pulmonary cell labeling was measured in terminal bronchiolar cells immediately after exposure but returned to control values 1 week later. Fiber clearance studies demonstrated a transient increase in the numbers of retained fibers at 1 week postexposure, with rapid clearance of fibers thereafter. The transient increase in the number of fibers could be due to transverse cleaving of the fibers, since the average lengths of retained fibers continued to decrease over time. In this regard, a progressive decrease in the mean lengths and diameters of inhaled fibers was measured over a 6-month postexposure period.(ABSTRACT TRUNCATED AT 400 WORDS)

Pulmonary neutrophil recruitment and bronchial reactivity in formaldehyde-exposed rats are modulated by mast cells and differentially by neuropeptides and nitric oxide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lino dos Santos Franco, Adriana; Damazo, Amilcar Sabino; Post-Graduation in Morphology, UNIFESP, EPM, Sao Paulo

2006-07-01

We have used a pharmacological approach to study the mechanisms underlying the rat lung injury and the airway reactivity changes induced by inhalation of formaldehyde (FA) (1% formalin solution, 90 min once a day, 4 days). The reactivity of isolated tracheae and intrapulmonary bronchi were assessed in dose-response curves to methacholine (MCh). Local and systemic inflammatory phenomena were evaluated in terms of leukocyte countings in bronchoalveolar lavage (BAL) fluid, blood, bone marrow lavage and spleen. Whereas the tracheal reactivity to MCh did not change, a significant bronchial hyporesponsiveness (BHR) was found after FA inhalation as compared with naive rats. Also,more » FA exposure significantly increased the total cell numbers in BAL, in peripheral blood and in the spleen, but did not modify the counts in bone marrow. Capsaicin hindered the increase of leukocyte number recovered in BAL fluid after FA exposure. Both compound 48/80 and indomethacin were able to prevent the lung neutrophil influx after FA, but indomethacin had no effect on that of mononuclear cells. Following FA inhalation, the treatment with sodium cromoglycate (SCG), but not with the nitric oxide (NO) synthase inhibitor L-NAME, significantly reduced the total cell number in BAL. Compound 48/80, L-NAME and SCG significantly prevented BHR to MCh after FA inhalation, whereas capsaicin was inactive in this regard. On the other hand, indomethacin exacerbated BHR. These data suggest that after FA inhalation, the resulting lung leukocyte influx and BHR may involve nitric oxide, airway sensory fibers and mast cell-derived mediators. The effect of NO seemed to be largely restricted to the bronchial tonus, whereas neuropeptides appeared to be linked to the inflammatory response, therefore indicating that the mechanisms responsible for the changes of airway responsiveness caused by FA may be separate from those underlying its inflammatory lung effects.« less

Exposures to nanoparticles and fibers during injection molding and recycling of carbon nanotube reinforced polycarbonate composites.

PubMed

Boonruksa, Pongsit; Bello, Dhimiter; Zhang, Jinde; Isaacs, Jacqueline A; Mead, Joey L; Woskie, Susan R

2017-07-01

In this study, the characteristics of airborne particles generated during injection molding and grinding processes of carbon nanotube reinforced polycarbonate composites (CNT-PC) were investigated. Particle number concentration, size distribution, and morphology of particles emitted from the processes were determined using real-time particle sizers and transmission electron microscopy. The air samples near the operator's breathing zone were collected on filters and analyzed using scanning electron microscope for particle morphology and respirable fiber count. Processing and grinding during recycling of CNT-PC released airborne nanoparticles (NPs) with a geometric mean (GM) particle concentration from 4.7 × 10 3 to 1.7 × 10 6 particles/cm 3 . The ratios of the GM particle concentration measured during the injection molding process with exhaust ventilation relative to background were up to 1.3 (loading), 1.9 (melting), and 1.4 (molding), and 101.4 for grinding process without exhaust ventilation, suggesting substantial NP exposures during these processes. The estimated mass concentration was in the range of 1.6-95.2 μg/m 3 . Diverse particle morphologies, including NPs, NP agglomerates, particles with embedded or protruding CNTs and fibers, were observed. No free CNTs were found during any of the investigated processes. The breathing zone respirable fiber concentration during the grinding process ranged from non-detectable to 0.13 fiber/cm 3 . No evidence was found that the emissions were affected by the number of recycling cycles. Institution of exposure controls is recommended during these processes to limit exposures to airborne NPs and CNT-containing fibers.

Clorate Metabolism in Pure Cultures of E.Coli 0157:H7 Pretreated with Either Nitrate or Chlorate

USDA-ARS?s Scientific Manuscript database

Experiments were conducted to determine the effects of 5, 7.5, and 10 mM nitrate, and 5, 10, or 20 mM chlorate on total E. coli counts, chlorate metabolism, and volatile fatty acid (VFA) concentrations in anaerobic ruminal fluid cultures. Nitrate did not affect total E. coli counts (P = 0.05), chlor...

Rapid staining and enumeration of small numbers of total bacteria in water by solid-phase laser cytometry

NASA Technical Reports Server (NTRS)

Broadaway, Susan C.; Barton, Stephanie A.; Pyle, Barry H.

2003-01-01

The nucleic acid stain SYBR Green I was evaluated for use with solid-phase laser cytometry to obtain total bacterial cell counts from several water sources with small bacterial numbers. Results were obtained within 30 min and exceeded or equaled counts on R2A agar plates incubated for 14 days at room temperature.

Effect of vacuum and modified atmosphere packaging on microbiological properties of cold-smoked trout

NASA Astrophysics Data System (ADS)

Đorđević, J.; Pavlićević, N.; Bošković, M.; Janjić, J.; Glišić, M.; Starčević, M.; Baltić, M. Ž.

2017-09-01

Because of the importance of different packaging methods for the extension of fish shelf life, as a highly perishable food, the aim of the present study was to examine the effect of vacuum and modified atmosphere packaging on the total Enterobacteriaceae and lactic acid bacteria counts of cold-smoked Salmon trout (Oncorhynchus mykiss) stored at 3°C during six weeks. Trout fillets were vacuumed packaged (VP) or packaged in one of two different modified atmospheres, with gas ratio of 50%CO2/50%N2 (MAP1) and 90%CO2/10%N2 (MAP2) and analysed on days 0, 7, 14, 21, 28, 35 and 42. Both the total Enterobacteriaceae and total lactic acid bacteria counts increased in the trout fillets in all packaging types during storage. A significantly lower total Enterobacteriaceae count was determined in the MAP fish compared to the VP fish, with the weakest growth rate and lowest numbers attained in MAP2 fillets. The lactic acid bacteria count was higher in trout packaged in MAP compared to VP, with the highest number in the MAP with 90% CO2 (MAP2).

Quasi-distributed and wavelength selective addressing of optical micro-resonators based on long period fiber gratings.

PubMed

Farnesi, D; Chiavaioli, F; Baldini, F; Righini, G C; Soria, S; Trono, C; Conti, G Nunzi

2015-08-10

A novel all-in-fiber method for coupling light to high-Q silica whispering gallery mode (WGM) optical micro-resonators is presented, which is based on a pair of long period fiber gratings (LPGs) written in the same silica fiber, along with a thick fiber taper (15-18 μm in waist) in between the LPGs. The proposed coupling structure is robust and can be replicated many times along the same fiber simply cascading LPGs with different bands. Typical Q-factors of the order of 10(8) and total coupling efficiency up to 60% were measured collecting the resonances of microspheres or microbubbles at the fiber end. This approach uniquely allows quasi-distributed and wavelength selective addressing of different micro-resonators along the same fiber.

Fingerprint Ridge Count: A Polygenic Trait Useful in Classroom Instruction.

ERIC Educational Resources Information Center

Mendenhall, Gordon; And Others

1989-01-01

Describes the use of the polygenic trait of total fingerprint ridge count in the classroom as a laboratory investigation. Presents information on background of topic, fingerprint patterns which are classified into three major groups, ridge count, the inheritance model, and activities. Includes an example data sheet format for fingerprints. (RT)

Development of a simultaneous multiple solid-phase microextraction-single shot-gas chromatography/mass spectrometry method and application to aroma profile analysis of commercial coffee.

PubMed

Lee, Changgook; Lee, Younghoon; Lee, Jae-Gon; Buglass, Alan J

2013-06-21

A simultaneous multiple solid-phase microextraction-single shot-gas chromatography mass spectrometry (smSPME-ss-GC/MS) method has been developed for headspace analysis. Up to four fibers (50/30 μm DVB/CAR/PDMS) were used simultaneously for the extraction of aroma components from the headspace of a single sample chamber in order to increase sensitivity of aroma extraction. To avoid peak broadening and to maximize resolution, a simple cryofocusing technique was adopted during sequential thermal desorption of multiple SPME fibers prior to a 'single shot' chromatographic run. The method was developed and validated on a model flavor mixture, containing 81 known pure components. With the conditions of 10 min of incubation and 30 min of extraction at 50 °C, single, dual, triple and quadruple SPME extractions were compared. The increase in total peak area with increase in the number of fibers showed good linearity (R(2)=0.9917) and the mean precision was 12.0% (RSD) for the total peak sum, with quadruple simultaneous SPME extraction. Using a real sample such as commercial coffee granules, aroma profile analysis was conducted using single, dual, triple and quadruple SPME fibers. The increase in total peak intensity again showed good linearity with increase in the number of SPME fibers used (R(2)=0.9992) and the precision of quadruple SPME extraction was 9.9% (RSD) for the total peak sum. Copyright © 2013 Elsevier B.V. All rights reserved.

Evaluation of three portable samplers for monitoring airborne fungi

NASA Technical Reports Server (NTRS)

Mehta, S. K.; Mishra, S. K.; Pierson, D. L.

1996-01-01

Airborne fungi were monitored at five sample sites with the Burkard portable, the RCS Plus, and the SAS Super 90 air samplers; the Andersen 2-stage impactor was used for comparison. All samplers were calibrated before being used simultaneously to collect 100-liter samples at each site. The Andersen and Burkard samplers retrieved equivalent volumes of airborne fungi; the SAS Super 90 and RCS Plus measurements did not differ from each other but were significantly lower than those obtained with the Andersen or Burkard samplers. Total fungal counts correlated linearly with Cladosporium and Penicillium counts. Alternaria species, although present at all sites, did not correlate with total count or with amounts of any other fungal genera. Sampler and location significantly influenced fungal counts, but no interactions between samplers and locations were found.

Dietary fiber and progression of atherosclerosis: the Los Angeles Atherosclerosis Study.

PubMed

Wu, Huiyun; Dwyer, Kathleen M; Fan, Zhihong; Shircore, Anne; Fan, Jing; Dwyer, James H

2003-12-01

Several epidemiologic studies found weak protective relations between dietary fiber intake and the risk of cardiovascular disease events. However, few of the studies addressed possible mechanisms of the effect. In the present study, we estimated relations between the progression of atherosclerosis and the intake of selective dietary fiber fractions. Mediation of the relations by serum lipids was also investigated. Participants who were free of heart disease and aged 40-60 y were recruited into the cohort (n = 573; 47% women). The intima-media thickness (IMT) of the common carotid arteries was measured ultrasonographically at the baseline examination and at 2 follow-up examinations (n = 500), dietary intakes were assessed with six 24-h recalls (3 at baseline and 3 at the first follow-up examination), and blood samples were analyzed at baseline and at both follow-up examinations. A significant inverse association was observed between IMT progression and the intakes of viscous fiber (P = 0.05) and pectin (P = 0.01). Correction for measurement error increased the magnitude of these estimated effects. The ratio of total to HDL cholesterol was inversely related to the intakes of total fiber (P = 0.01), viscous fiber (P = 0.05), and pectin (P = 0.01). The magnitude of the association between IMT progression and the intakes of viscous fiber and pectin was attenuated by adjustment for serum lipids. The intake of viscous fiber, especially pectin, appears to protect against IMT progression. Serum lipids may act as a mediator between dietary fiber intake and IMT progression.

Evaluation of retinal nerve fiber layer thickness in the area of apparently normal hemifield in glaucomatous eyes with optical coherence tomography.

PubMed

Kee, Changwon; Cho, Changhwan

2003-06-01

The authors investigated the correlation between visual field defects detected by automated perimetry and the thickness of the retinal nerve fiber layer measured with optical coherence tomography, and examined whether there is a decrease in retinal nerve fiber layer thickness in the apparently normal hemifield of glaucomatous eyes. Forty-one patients with glaucoma and 41 normal control subjects were included in this study. Statistical correlations between the sum of the total deviation of 37 stimuli of each hemifield and the ratio of decrease in retinal nerve fiber layer thickness were evaluated. The statistical difference between the retinal nerve fiber layer thickness of the apparently normal hemifield in glaucomatous eyes and that of the corresponding hemifield in normal subjects was also evaluated. There was a statistically significant correlation in the sum of the total deviation and retinal nerve fiber layer thickness decrease ratio (superior hemifield, P = 0.001; inferior hemifield, P = 0.003). There was no significant decrease in retinal nerve fiber layer thickness in the area that corresponded to the normal visual field in the hemifield defect with respect to the horizontal meridian in glaucomatous eyes (superior side, P = 0.148; inferior side, P = 0.341). Optical coherence tomography was capable of demonstrating and measuring retinal nerve fiber layer abnormalities. No changes in the retinal nerve fiber layer thickness of the apparently normal hemifield were observed in glaucomatous eyes.

Effect of Coconut, Sisal and Jute Fibers on the Properties of Starch/Gluten/Glycerol Matrix

USDA-ARS?s Scientific Manuscript database

Coconut, sisal and jute fibers were added as reinforcement materials in a biodegradable polymer matrix comprised of starch/gluten/glycerol. The content of fibers used in the composites varied from 5% to 30% by weight of the total polymers (starch and gluten). Materials were processed in a Haake torq...

Effects of alfalfa flavonoids on the production performance, immune system, and ruminal fermentation of dairy cows.

PubMed

Zhan, Jinshun; Liu, Mingmei; Su, Xiaoshuang; Zhan, Kang; Zhang, Chungang; Zhao, Guoqi

2017-10-01

The objective of this study was to examine the effects of alfalfa flavonoids on the production performance, immunity, and ruminal fermentation of dairy cows. The experiments employed four primiparous Holstein cows fitted with ruminal cannulas, and used a 4×4 Latin square design. Cattle were fed total mixed ration supplemented with 0 (control group, Con), 20, 60, or 100 mg of alfalfa flavonoids extract (AFE) per kg of dairy cow body weight (BW). The feed intake of the group receiving 60 mg/kg BW of AFE were significantly higher (p<0.05) than that of the group receiving 100 mg/kg BW. Milk yields and the fat, protein and lactose of milk were unaffected by AFE, while the total solids content of milk reduced (p = 0.05) linearly as AFE supplementation was increased. The somatic cell count of milk in group receiving 60 mg/kg BW of AFE was significantly lower (p<0.05) than that of the control group. Apparent total-tract digestibility of neutral detergent fiber and crude protein showed a tendency to increase (0.05

Fiber comb filters based on UV-writing Bragg gratings in graded-index multimode fibers

NASA Astrophysics Data System (ADS)

Liu, Yu; Lit, John; Gu, Xijia; Wei, Li

2005-10-01

We report a new kind of comb filters based on fiber Bragg gratings in graded-index multimode fibers. It produces two groups of spectra with a total of 36 reflection peaks that correspond to 18 principal modes and cross coupled modes. The mode indices and wavelength spacings have been investigated theoretically and experimentally. This kind of comb filters may be used to construct multi-wavelength light sources for sensing, optical communications, and instrumentations

Laser-Powered Thrusters for High Efficiency Variable Specific Impulse Missions (Preprint)

DTIC Science & Technology

2007-04-10

technology. However, a laser-ablation propulsion engine using a set of diode-pumped glass fiber amplifiers with a total of 350-W optical power can...in a single device using low-mass diode-pumped glass fiber laser amplifiers to operate in either long- or short-pulse regimes at will. Adequate fiber...pulsewidth glass fiber oscillator-amplifiers, rather than the diodes used in the µ LPT, to achieve Table 2. Demonstrated technology basis Ablation Fuel Gold

Comparison of cell counting methods in rodent pulmonary toxicity studies: automated and manual protocols and considerations for experimental design

PubMed Central

Zeidler-Erdely, Patti C.; Antonini, James M.; Meighan, Terence G.; Young, Shih-Houng; Eye, Tracy J.; Hammer, Mary Ann; Erdely, Aaron

2016-01-01

Pulmonary toxicity studies often use bronchoalveolar lavage (BAL) to investigate potential adverse lung responses to a particulate exposure. The BAL cellular fraction is counted, using automated (i.e. Coulter Counter®), flow cytometry or manual (i.e. hemocytometer) methods, to determine inflammatory cell influx. The goal of the study was to compare the different counting methods to determine which is optimal for examining BAL cell influx after exposure by inhalation or intratracheal instillation (ITI) to different particles with varying inherent pulmonary toxicities in both rat and mouse models. General findings indicate that total BAL cell counts using the automated and manual methods tended to agree after inhalation or ITI exposure to particle samples that are relatively nontoxic or at later time points after exposure to a pneumotoxic particle when the response resolves. However, when the initial lung inflammation and cytotoxicity was high after exposure to a pneumotoxic particle, significant differences were observed when comparing cell counts from the automated, flow cytometry and manual methods. When using total BAL cell count for differential calculations from the automated method, depending on the cell diameter size range cutoff, the data suggest that the number of lung polymorphonuclear leukocytes (PMN) varies. Importantly, the automated counts, regardless of the size cutoff, still indicated a greater number of total lung PMN when compared with the manual method, which agreed more closely with flow cytometry. The results suggest that either the manual method or flow cytometry would be better suited for BAL studies where cytotoxicity is an unknown variable. PMID:27251196

Comparison of cell counting methods in rodent pulmonary toxicity studies: automated and manual protocols and considerations for experimental design.

PubMed

Zeidler-Erdely, Patti C; Antonini, James M; Meighan, Terence G; Young, Shih-Houng; Eye, Tracy J; Hammer, Mary Ann; Erdely, Aaron

2016-08-01

Pulmonary toxicity studies often use bronchoalveolar lavage (BAL) to investigate potential adverse lung responses to a particulate exposure. The BAL cellular fraction is counted, using automated (i.e. Coulter Counter®), flow cytometry or manual (i.e. hemocytometer) methods, to determine inflammatory cell influx. The goal of the study was to compare the different counting methods to determine which is optimal for examining BAL cell influx after exposure by inhalation or intratracheal instillation (ITI) to different particles with varying inherent pulmonary toxicities in both rat and mouse models. General findings indicate that total BAL cell counts using the automated and manual methods tended to agree after inhalation or ITI exposure to particle samples that are relatively nontoxic or at later time points after exposure to a pneumotoxic particle when the response resolves. However, when the initial lung inflammation and cytotoxicity was high after exposure to a pneumotoxic particle, significant differences were observed when comparing cell counts from the automated, flow cytometry and manual methods. When using total BAL cell count for differential calculations from the automated method, depending on the cell diameter size range cutoff, the data suggest that the number of lung polymorphonuclear leukocytes (PMN) varies. Importantly, the automated counts, regardless of the size cutoff, still indicated a greater number of total lung PMN when compared with the manual method, which agreed more closely with flow cytometry. The results suggest that either the manual method or flow cytometry would be better suited for BAL studies where cytotoxicity is an unknown variable.

Association mapping analysis of fiber yield and quality traits in Upland cotton (Gossypium hirsutum L.).

PubMed

Ademe, Mulugeta Seyoum; He, Shoupu; Pan, Zhaoe; Sun, Junling; Wang, Qinglian; Qin, Hongde; Liu, Jinhai; Liu, Hui; Yang, Jun; Xu, Dongyong; Yang, Jinlong; Ma, Zhiying; Zhang, Jinbiao; Li, Zhikun; Cai, Zhongmin; Zhang, Xuelin; Zhang, Xin; Huang, Aifen; Yi, Xianda; Zhou, Guanyin; Li, Lin; Zhu, Haiyong; Pang, Baoyin; Wang, Liru; Jia, Yinhua; Du, Xiongming

2017-12-01

Fiber yield and quality are the most important traits for Upland cotton (Gossypium hirsutum L.). Identifying high yield and good fiber quality genes are the prime concern of researchers in cotton breeding. Association mapping offers an alternative and powerful method for detecting those complex agronomic traits. In this study, 198 simple sequence repeats (SSRs) were used to screen markers associated with fiber yield and quality traits with 302 elite Upland cotton accessions that were evaluated in 12 locations representing the Yellow River and Yangtze River cotton growing regions of China. Three subpopulations were found after the estimation of population structure. The pair-wise kinship values varied from 0 to 0.867. Only 1.59% of the total marker locus pairs showed significant linkage disequilibrium (LD, p < 0.001). The genome-wide LD decayed within the genetic distance of ~30 to 32 cM at r 2  = 0.1, and decreased to ~1 to 2 cM at r 2  = 0.2, indicating the potential for association mapping. Analysis based on a mixed linear model detected 57 significant (p < 0.01) marker-trait associations, including seven associations for fiber length, ten for fiber micronaire, nine for fiber strength, eight for fiber elongation, five for fiber uniformity index, five for fiber uniformity ratio, six for boll weight and seven for lint percent, for a total of 35 SSR markers, of which 11 markers were associated with more than one trait. Among marker-trait associations, 24 associations coincided with the previously reported quantitative trait loci (QTLs), the remainder were newly identified QTLs/genes. The QTLs identified in this study will potentially facilitate improvement of fiber yield and quality in the future cotton molecular breeding programs.

Impact of dietary fiber intake on glycemic control, cardiovascular risk factors and chronic kidney disease in Japanese patients with type 2 diabetes mellitus: the Fukuoka Diabetes Registry

PubMed Central

2013-01-01

Background Dietary fiber is beneficial for the treatment of type 2 diabetes mellitus, although it is consumed differently in ethnic foods around the world. We investigated the association between dietary fiber intake and obesity, glycemic control, cardiovascular risk factors and chronic kidney disease in Japanese type 2 diabetic patients. Methods A total of 4,399 patients were assessed for dietary fiber intake using a brief self-administered diet history questionnaire. The associations between dietary fiber intake and various cardiovascular risk factors were investigated cross-sectionally. Results Body mass index, fasting plasma glucose, HbA1c, triglyceride and high-sensitivity C-reactive protein negatively associated with dietary fiber intake after adjusting for age, sex, duration of diabetes, current smoking, current drinking, total energy intake, fat intake, saturated fatty acid intake, leisure-time physical activity and use of oral hypoglycemic agents or insulin. The homeostasis model assessment insulin sensitivity and HDL cholesterol positively associated with dietary fiber intake. Dietary fiber intake was associated with reduced prevalence of abdominal obesity, hypertension and metabolic syndrome after multivariate adjustments including obesity. Furthermore, dietary fiber intake was associated with lower prevalence of albuminuria, low estimated glomerular filtration rate and chronic kidney disease after multivariate adjustments including protein intake. Additional adjustments for obesity, hypertension or metabolic syndrome did not change these associations. Conclusion We demonstrated that increased dietary fiber intake was associated with better glycemic control and more favorable cardiovascular disease risk factors including chronic kidney disease in Japanese type 2 diabetic patients. Diabetic patients should be encouraged to consume more dietary fiber in daily life. PMID:24330576

Expected total counts for the Self-Interrogation Neutron Resonance Densitometry measurements of spent nuclear fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rossa, Riccardo; Universite Libre de Bruxelles; Borella, Alessandro

2015-07-01

The Self-Interrogation Neutron Resonance Densitometry (SINRD) is a passive neutron technique that aims at a direct quantification of {sup 239}Pu in spent fuel assemblies by measuring the attenuation of the neutron flux in the energy region close to the 0.3 eV resonance of {sup 239}Pu. The {sup 239}Pu mass is estimated by calculating the SINRD signature, that is the ratio between the neutron counts in the fast energy region and around the 0.3 eV resonance region. The SINRD measurement approach in this study consisted in introducing a small neutron detector in the central guide tube of a PWR 17x17 fuelmore » assembly. In order to measure the neutron flux in the energy regions defined in the SINRD signature, different detector types were used. The response of a bare {sup 238}U fission chamber is considered for the determination of the fast neutron flux, while other thermal-epithermal detectors wrapped in neutron absorbers are envisaged to measure the neutron flux around the resonance region. This paper provides an estimation of the total neutron counts that can be achieved with the detector types proposed for the SINRD measurement. In the first section a set of detectors are evaluated in terms of total neutron counts and sensitivity to the {sup 239}Pu content, in order to identify the optimal measurement configuration for each detector type. Then a study is performed to increase the total neutron counts by increasing the detector size. The study shows that the highest total neutron counts are achieved by using either {sup 3}He or {sup 10}B proportional counters because of the high neutron efficiency of these detectors. However, the calculations indicate that the biggest contribution to the measurement uncertainty is due to the measurement of the fast neutron flux. Finally, similar sensitivity to the {sup 239}Pu content is obtained by using the different detector types for the measurement of the neutron flux close to the resonance region. Therefore, the total neutron counts associated to each detector type will play a major role in the selection of the detector types used for the SINRD measurement. (authors)« less

High pumping-power fiber combiner for double-cladding fiber lasers and amplifiers

NASA Astrophysics Data System (ADS)

Zheng, Jinkun; Zhao, Wei; Zhao, Baoyin; Li, Zhe; Chang, Chang; Li, Gang; Gao, Qi; Ju, Pei; Gao, Wei; She, Shengfei; Wu, Peng; Hou, Chaoqi; Li, Weinan

2018-03-01

A high pumping-power fiber combiner for backward pumping configurations is fabricated and demonstrated by manufacturing process refinement. The pump power handling capability of every pump fiber can extend to 600 W, corresponding to the average pump coupling efficiency of 94.83%. Totally, 2.67-kW output power with the beam quality factor M2 of 1.41 was obtained, using this combiner in the fiber amplifier experimental setup. In addition, the temperature of the splicing region was less than 50.0°C in the designed combiner under the action of circulating cooling water. The experimental results prove that the designed combiner is a promising integrated all-fiber device for multikilowatt continuous-wave fiber laser with excellent beam quality.

Easy preparation of dietary fiber with the high water-holding capacity from food sources.

PubMed

Yamazaki, Eiji; Murakami, Kazumi; Kurita, Osamu

2005-03-01

Dietary fibers were prepared as alkali- and acid-insoluble fractions with chemical phosphorylation from Tossa jute (Corchorus olitorius), defatted soybean (Glycine max), and Shiitake (Lentinula edodes). The dietary fiber fractions treated with alkaline solution containing sodium metaphosphate had the lower protein content and higher total dietary fiber content than those of the preparations without phosphorylation. Alkaline extraction followed by phosphorylation led to a 1.5-fold increase in the water holding capacity of dietary fiber compared with no phosphorylation, whereas the binding capacity to bile acids of dietary fiber was almost the same. The alkali- and acid-insoluble extraction with phosphorylation provided an efficient preparation of water-insoluble dietary fiber with high-water holding capacity from various food sources.

Designing optical-fiber modulators by using magnetic fluids.

PubMed

Horng, H E; Chieh, J J; Chao, Y H; Yang, S Y; Hong, Chin-Yih; Yang, H C

2005-03-01

To reduce interface loss between optical fibers and devices in telecommunication systems, the development of an optical-fiber-based device that can be fused directly with fibers is important. A novel optical modulator consisting of a bare fiber core surrounded by magnetic fluids instead of by a SiO2 cladding layer is proposed. Applying a magnetic field raises the refractive index of the magnetic fluid. Thus we can control the occurrence of total reflection at the interface between the fiber core and the magnetic fluid when light propagates along the fiber. As a result, the intensity of the outgoing light is modulated by variation in field strength. Details of the design, fabrication, and working properties of such a modulator are presented.

Femtosecond laser fabrication of fiber based optofluidic platform for flow cytometry applications

NASA Astrophysics Data System (ADS)

Serhatlioglu, Murat; Elbuken, Caglar; Ortac, Bulend; Solmaz, Mehmet E.

2017-02-01

Miniaturized optofluidic platforms play an important role in bio-analysis, detection and diagnostic applications. The advantages of such miniaturized devices are extremely low sample requirement, low cost development and rapid analysis capabilities. Fused silica is advantageous for optofluidic systems due to properties such as being chemically inert, mechanically stable, and optically transparent to a wide spectrum of light. As a three dimensional manufacturing method, femtosecond laser scanning followed by chemical etching shows great potential to fabricate glass based optofluidic chips. In this study, we demonstrate fabrication of all-fiber based, optofluidic flow cytometer in fused silica glass by femtosecond laser machining. 3D particle focusing was achieved through a straightforward planar chip design with two separately fabricated fused silica glass slides thermally bonded together. Bioparticles in a fluid stream encounter with optical interrogation region specifically designed to allocate 405nm single mode fiber laser source and two multi-mode collection fibers for forward scattering (FSC) and side scattering (SSC) signals detection. Detected signal data collected with oscilloscope and post processed with MATLAB script file. We were able to count number of events over 4000events/sec, and achieve size distribution for 5.95μm monodisperse polystyrene beads using FSC and SSC signals. Our platform shows promise for optical and fluidic miniaturization of flow cytometry systems.

Dog Ecology and Population Studies in Lagos State, Nigeria

PubMed Central

Hambolu, Sunday E.; Dzikwi, Asabe A.; Kwaga, Jacob K.P.; Kazeem, Haruna M.; Umoh, Jarlath U.; Hambolu, Dupe A.

2014-01-01

Dog population dynamics have a major impact upon the effectiveness of rabies control strategies. As such, understanding domestic dog ecology has been recognized as central to the design of effective rabies control programmes. This study was conducted to determine the dog ecology in Lagos State using compound dog count and street dog count in the three senatorial districts (Lagos West, East and Central) of Lagos State from February, 2011 to January, 2012. A total of 546 questionnaires were distributed for the compound dog count and all were completed and returned. Various aspects of dog ecology were determined, including size, sex, breed of the dog population, management of dogs and rabies awareness among the respondents. Out of the 546 compounds surveyed, 518 (94.87%) owned at least one dog. A total of 1,427 dogs were counted from the street counts while a total of 1,447 dogs (2.8 dogs/compound) were counted from the compound count. The dogs comprised of 583 males and 864 females, out of which 64.10% are confined. The dog vaccination coverage in the dog population surveyed was 64.10% and administered majorly (91.30%) by veterinarians. Security (60%) and pets (26%) were the major reasons for keeping dogs. Majority (88.80%) of the respondents were aware of rabies and its mode of transmission, but still believed in the use of concoctions (40.40%), herbs (19.90%) and consumption of the organ of the offending dog (11.50%) for the treatment of rabies. The findings of this study showed a male: female ratio of dog to be 1:1.5 and a dog: human ratio of 1:5.6. There was also a responsible dog ownership as majority of the respondents do confine, vaccinate and provide food for their dogs. Vaccination coverage of the total dog population was however below the 70-80% target recommended by the World Health Organization to achieve herd immunity. PMID:24576383

Effect of a syringe aspiration technique versus a mechanical suction technique and use of N-butylscopolammonium bromide on the quantity and quality of bronchoalveolar lavage fluid samples obtained from horses with the summer pasture endophenotype of equine asthma.

PubMed

Bowser, Jacquelyn E; Costa, Lais R R; Rodil, Alba U; Lopp, Christine T; Johnson, Melanie E; Wills, Robert W; Swiderski, Cyprianna E

2018-03-01

OBJECTIVE To evaluate the effect of 2 bronchoalveolar lavage (BAL) sampling techniques and the use of N-butylscopolammonium bromide (NBB) on the quantity and quality of BAL fluid (BALF) samples obtained from horses with the summer pasture endophenotype of equine asthma. ANIMALS 8 horses with the summer pasture endophenotype of equine asthma. PROCEDURES BAL was performed bilaterally (right and left lung sites) with a flexible videoendoscope passed through the left or right nasal passage. During lavage of the first lung site, a BALF sample was collected by means of either gentle syringe aspiration or mechanical suction with a pressure-regulated wall-mounted suction pump. The endoscope was then maneuvered into the contralateral lung site, and lavage was performed with the alternate fluid retrieval technique. For each horse, BAL was performed bilaterally once with and once without premedication with NBB (21-day interval). The BALF samples retrieved were evaluated for volume, total cell count, differential cell count, RBC count, and total protein concentration. RESULTS Use of syringe aspiration significantly increased total BALF volume (mean volume increase, 40 mL [approx 7.5% yield]) and decreased total RBC count (mean decrease, 142 cells/μL), compared with use of mechanical suction. The BALF nucleated cell count and differential cell count did not differ between BAL procedures. Use of NBB had no effect on BALF retrieval. CONCLUSIONS AND CLINICAL RELEVANCE Results indicated that retrieval of BALF by syringe aspiration may increase yield and reduce barotrauma in horses at increased risk of bronchoconstriction and bronchiolar collapse. Further studies to determine the usefulness of NBB and other bronchodilators during BAL procedures in horses are warranted.

Usefulness of Cellular Analysis of Bronchoalveolar Lavage Fluid for Predicting the Etiology of Pneumonia in Critically Ill Patients

PubMed Central

Hong, Hyo-Lim; Kim, Sung-Han; Huh, Jin Won; Sung, Heungsup; Lee, Sang-Oh; Kim, Mi-Na; Jeong, Jin-Yong; Lim, Chae-Man; Kim, Yang Soo; Woo, Jun Hee; Koh, Younsuck

2014-01-01

Background The usefulness of bronchoalveolar lavage (BAL) fluid cellular analysis in pneumonia has not been adequately evaluated. This study investigated the ability of cellular analysis of BAL fluid to differentially diagnose bacterial pneumonia from viral pneumonia in adult patients who are admitted to intensive care unit. Methods BAL fluid cellular analysis was evaluated in 47 adult patients who underwent bronchoscopic BAL following less than 24 hours of antimicrobial agent exposure. The abilities of BAL fluid total white blood cell (WBC) counts and differential cell counts to differentiate between bacterial and viral pneumonia were evaluated using receiver operating characteristic (ROC) curve analysis. Results Bacterial pneumonia (n = 24) and viral pneumonia (n = 23) were frequently associated with neutrophilic pleocytosis in BAL fluid. BAL fluid median total WBC count (2,815/µL vs. 300/µL, P<0.001) and percentage of neutrophils (80.5% vs. 54.0%, P = 0.02) were significantly higher in the bacterial pneumonia group than in the viral pneumonia group. In ROC curve analysis, BAL fluid total WBC count showed the best discrimination, with an area under the curve of 0.855 (95% CI, 0.750–0.960). BAL fluid total WBC count ≥510/µL had a sensitivity of 83.3%, specificity of 78.3%, positive likelihood ratio (PLR) of 3.83, and negative likelihood ratio (NLR) of 0.21. When analyzed in combination with serum procalcitonin or C-reactive protein, sensitivity was 95.8%, specificity was 95.7%, PLR was 8.63, and NLR was 0.07. BAL fluid total WBC count ≥510/µL was an independent predictor of bacterial pneumonia with an adjusted odds ratio of 13.5 in multiple logistic regression analysis. Conclusions Cellular analysis of BAL fluid can aid early differential diagnosis of bacterial pneumonia from viral pneumonia in critically ill patients. PMID:24824328

Total body calcium analysis. [neutron irradiation

NASA Technical Reports Server (NTRS)

Lewellen, T. K.; Nelp, W. B.

1974-01-01

A technique to quantitate total body calcium in humans is developed. Total body neutron irradiation is utilized to produce argon 37. The radio argon, which diffuses into the blood stream and is excreted through the lungs, is recovered from the exhaled breath and counted inside a proportional detector. Emphasis is placed on: (1) measurement of the rate of excretion of radio argon following total body neutron irradiation; (2) the development of the radio argon collection, purification, and counting systems; and (3) development of a patient irradiation facility using a 14 MeV neutron generator. Results and applications are discussed in detail.

Extraction and HPLC analysis of phenolic compounds in leaves, stalks, and textile fibers of Urtica dioica L.

PubMed

Pinelli, Patrizia; Ieri, Francesca; Vignolini, Pamela; Bacci, Laura; Baronti, Silvia; Romani, Annalisa

2008-10-08

In the present study the phenolic composition of leaves, stalks, and textile fiber extracts from Urtica dioica L. is described. Taking into account the increasing demand for textile products made from natural fibers and the necessity to create sustainable "local" processing chains, an Italian project was funded to evaluate the cultivation of nettle fibers in the region of Tuscany. The leaves of two nettle samples, cultivated and wild (C and W), contain large amounts of chlorogenic and 2- O-caffeoylmalic acid, which represent 71.5 and 76.5% of total phenolics, respectively. Flavonoids are the main class in the stalks: 54.4% of total phenolics in C and 31.2% in W samples. Anthocyanins are second in quantitative importance and are present only in nettle stalks: 28.6% of total phenolics in C and 24.4% in W extracts. Characterization of phenolic compounds in nettle extracts is an important result with regard to the biological properties (antioxidant and antiradical) of these metabolites for their possible applications in various industrial activities, such as food/feed, cosmetics, phytomedicine, and textiles.

Fiber-optic evanescent-wave spectroscopy for fast multicomponent analysis of human blood

NASA Astrophysics Data System (ADS)

Simhi, Ronit; Gotshal, Yaron; Bunimovich, David; Katzir, Abraham; Sela, Ben-Ami

1996-07-01

A spectral analysis of human blood serum was undertaken by fiber-optic evanescent-wave spectroscopy (FEWS) by the use of a Fourier-transform infrared spectrometer. A special cell for the FEWS measurements was designed and built that incorporates an IR-transmitting silver halide fiber and a means for introducing the blood-serum sample. Further improvements in analysis were obtained by the adoption of multivariate calibration techniques that are already used in clinical chemistry. The partial least-squares algorithm was used to calculate the concentrations of cholesterol, total protein, urea, and uric acid in human blood serum. The estimated prediction errors obtained (in percent from the average value) were 6% for total protein, 15% for cholesterol, 30% for urea, and 30% for uric acid. These results were compared with another independent prediction method that used a neural-network model. This model yielded estimated prediction errors of 8.8% for total protein, 25% for cholesterol, and 21% for uric acid. spectroscopy, fiber-optic evanescent-wave spectroscopy, Fourier-transform infrared spectrometer, blood, multivariate calibration, neural networks.

Radial-firing optical fiber tip containing conical-shaped air-pocket for biomedical applications.

PubMed

Lee, Seung Ho; Ryu, Yong-Tak; Son, Dong Hoon; Jeong, Seongmook; Kim, Youngwoong; Ju, Seongmin; Kim, Bok Hyeon; Han, Won-Taek

2015-08-10

We report a novel radial-firing optical fiber tip containing a conical-shaped air-pocket fabricated by deforming a hollow optical fiber using electric arc-discharge process. The hollow optical fiber was fusion spliced with a conventional optical fiber, simultaneously deforming into the intagliated conical-shaped region along the longitudinal fiber-axis of the fiber due to the gradual collapse of the cavity of the hollow optical fiber. Then the distal-end of the hollow optical fiber was sealed by the additional arc-discharge in order to obstruct the inflow of an external bio-substance or liquid to the inner air surface during the surgical operations, resulting in the formation of encased air-pocket in the silica glass fiber. Due to the total internal reflection of the laser beam at the conical-shaped air surface, the laser beam (λ = 632.8 nm) was deflected to the circumferential direction up to 87 degree with respect to the fiber-axis.

Isolation of microbial pathogens of subclinical mastitis from raw sheep's milk of Epirus (Greece) and their role in its hygiene.

PubMed

Fotou, K; Tzora, A; Voidarou, Ch; Alexopoulos, A; Plessas, S; Avgeris, I; Bezirtzoglou, E; Akrida-Demertzi, K; Demertzis, P G

2011-12-01

The natural raw milk microflora is a factor that expresses its sensorial characteristics. The microbial charge into the mammary gland of healthy animal is low and the application of right and healthy conditions during milking and cheese making procedure, prevents from contaminating as well as maintains the natural microflora in order to lend the particular characteristics of milk. The purpose of the present project was the study of the Total Viable Count (T.V.C.) and the count of total psychrotropic bacteria of raw sheep milk from Boutsiko and Karamaniko breeds, collected from healthy animals, as well as the isolation, identification and enumeration of pathogenic bacteria related with the hygiene and the quality of raw sheep milk (with a particular interest in bacteria that may cause human infection). During the experiment we examined two hundred forty (240) samples of raw sheep milk. In these samples a) Staphylococcus aureus, Salmonella sp., Escherichia coli, Clostridium perfringens (vegetative cells and spores) and Bacillus sp. were isolated and identified b) the Total Viable Count and the total number of psychrotropic bacteria were also specified. The sampling, the preparation of samples and decimal dilutions were based on international methods. The Total viable count was determined using the standard methods of the American Public Health Association, 2002. The total number of psychrotropic bacteria was determined using APHA 1976, 1978 rules. The identification of the bacteria was carried out according to the Bergey's manual. Microscopic examination of Gram stained cells, catalase, oxidase and biochemical tests were performed when necessary to further identify. From the 240 milk samples tested, only 5% were E. coli positive, with mean counts ranged from 2 × 10(3) to 2.4 × 10(4) cfu/ml. S. aureus was isolated from 24% of the samples and the mean count per ml was ranged from <10 to 3.4 × 10(2). Meanwhile, Bacillus spp. was also detected in 29% samples. Vegetative forms and spores of C. perfringens were detected in 13% and 63% of the samples respectively. However, microbiological analyses revealed the presence of a small number of selected pathogens in milk samples such as Salmonella, which was only detected in 5% of the samples. Listeria sp., Pseudomonas sp. and Vibrio cholerae were never found. From the experimental results, the Total Viable Count from raw sheep milk samples, fulfils the microbiological criteria of EU Legislation in a percentage of approximately 97%. Copyright © 2011 Elsevier Ltd. All rights reserved.

NIR fluorescence lifetime sensing through a multimode fiber for intravascular molecular probing

NASA Astrophysics Data System (ADS)

Ingelberts, H.; Hernot, S.; Debie, P.; Lahoutte, T.; Kuijk, M.

2016-04-01

Coronary artery disease (CAD) contributes to millions of deaths each year. The identification of vulnerable plaques is essential to the diagnosis of CAD but is challenging. Molecular probes can improve the detection of these plaques using intravascular imaging methods. Fluorescence lifetime sensing is a safe and robust method to image these molecular probes. We present two variations of an optical system for intravascular near-infrared (NIR) fluorescence lifetime sensing through a multimode fiber. Both systems are built around a recently developed fast and efficient CMOS detector, the current-assisted photonic sampler (CAPS) that is optimized for sub-nanosecond NIR fluorescence lifetime sensing. One system mimics the optical setup of an epifluorescence microscope while the other uses a practical fiber optic coupler to separate fluorescence excitation and emission. We test both systems by measuring the lifetime of several NIR dyes in DMSO solutions and we show that these systems are capable of detecting lifetimes of solutions with concentrations down to 370 nM and this with short acquisition times. These results are compared with time-correlated single photon counting (TCSPC) measurements for reference.

Quality characteristics of pork burger added with albedo-fiber powder obtained from yellow passion fruit (Passiflora edulis var. flavicarpa) co-products.

PubMed

López-Vargas, Jairo H; Fernández-López, Juana; Pérez-Álvarez, José Ángel; Viuda-Martos, Manuel

2014-06-01

The aim of this work determined the technological, nutritional and sensory characteristics of pork burgers, added with different concentrations (2.5 and 5%) of passion fruit albedo (PFA) co-product, obtained from passion fruit juice processing. The addition of PFA on pork burgers improves their nutritional value (higher fiber content). In raw and cooked burger, all textural parameters, except springiness and cohesiveness, were affected by the incorporation of PFA. PFA addition was found to be effective improving the cooking yield, moisture retention and fat retention. The raw and cooked pork burgers added with PFA had lower TBA values and lower counts of aerobic mesophilic bacteria and enterobacteria than the control samples. No Escherichia coli and molds were found in the samples. The overall acceptability scores showed that the most appreciated sample was the one containing 2.5% PFA. According to the results obtained, 2.5 and 5% of PFA addition can be recommended in pork burger production as a new dietary fiber source. Copyright © 2014 Elsevier Ltd. All rights reserved.

End-pumped 300 W continuous-wave ytterbium-doped all-fiber laser with master oscillator multi-stage power amplifiers configuration.

PubMed

Yin, Shupeng; Yan, Ping; Gong, Mali

2008-10-27

An end-pumped ytterbium-doped all-fiber laser with 300 W output in continuous regime was reported, which was based on master oscillator multi-stage power amplifiers configuration. Monolithic fiber laser system consisted of an oscillator stage and two amplifier stages. Total optical-optical efficiency of monolithic fiber laser was approximately 65%, corresponding to 462 W of pump power coupled into laser system. We proposed a new method to connect power amplifier stage, which was crucial for the application of end-pumped combiner in high power MOPAs all-fiber laser.

Fusion splice between tapered inhibited coupling hypocycloid-core Kagome fiber and SMF.

PubMed

Zheng, Ximeng; Debord, Benoît; Vincetti, Luca; Beaudou, Benoît; Gérôme, Frédéric; Benabid, Fetah

2016-06-27

We report for the first time on tapering inhibited coupling (IC) hypocycloid-core shape Kagome hollow-core photonic crystal fibers whilst maintaining their delicate core-contour negative curvature with a down-ratio as large as 2.4. The transmission loss of down-tapered sections reaches a figure as low as 0.07 dB at 1550 nm. The tapered IC fibers are also spliced to standard SMF with a total insertion loss of 0.48 dB. These results show that all-fiber photonic microcells with the ultra-low loss hypocycloid core-contour Kagome fibers is now possible.

Fibrous refractory composite insulation. [shielding reusable spacecraft

NASA Technical Reports Server (NTRS)

Leiser, D. B.; Goldstein, H. E.; Smith, M. (Inventor)

1979-01-01

A refractory composite insulating material was prepared from silica fibers and aluminosilicate fibers in a weight ratio ranging from 1:19 to 19:1, and about 0.5 to 30% boron oxide, based on the total fiber weight. The aluminosilicate fiber and boron oxide requirements may be satisfied by using aluminoborosilicate fibers and, in such instances, additional free boron oxide may be incorporated in the mix up to the 30% limit. Small quantities of refractory opacifiers, such as silicon carbide, may be also added. The composites just described are characterized by the absence of a nonfibrous matrix.

Fiber Intake and Survival After Colorectal Cancer Diagnosis.

PubMed

Song, Mingyang; Wu, Kana; Meyerhardt, Jeffrey A; Ogino, Shuji; Wang, Molin; Fuchs, Charles S; Giovannucci, Edward L; Chan, Andrew T

2018-01-01

Although high dietary fiber intake has been associated with a lower risk of colorectal cancer (CRC), it remains unknown whether fiber benefits CRC survivors. To assess the association of postdiagnostic fiber intake with mortality. A total of 1575 health care professionals with stage I to III CRC were evaluated in 2 prospective cohorts, Nurses' Health Study and Health Professionals Follow-up Study. Colorectal cancer-specific and overall mortality were determined after adjusting for other potential predictors for cancer survival. The study was conducted from December 23, 2016, to August 23, 2017. Consumption of total fiber and different sources of fiber and whole grains assessed by a validated food frequency questionnaire between 6 months and 4 years after CRC diagnosis. Hazard ratios (HRs) and 95% CIs of CRC-specific and overall mortality after adjusting for other potential predictors for cancer survival. Of the 1575 participants, 963 (61.1%) were women; mean (SD) age was 68.6 (8.9) years. During a median of 8 years of follow-up, 773 deaths were documented, including 174 from CRC. High intake of total fiber after diagnosis was associated with lower mortality. The multivariable HR per each 5-g increment in intake per day was 0.78 (95% CI, 0.65-0.93; P = .006) for CRC-specific mortality and 0.86 (95% CI, 0.79-0.93; P < .001) for all-cause mortality. Patients who increased their fiber intake after diagnosis from levels before diagnosis had a lower mortality, and each 5-g/d increase in intake was associated with 18% lower CRC-specific mortality (95% CI, 7%-28%; P = .002) and 14% lower all-cause mortality (95% CI, 8%-19%; P < .001). According to the source of fiber, cereal fiber was associated with lower CRC-specific mortality (HR per 5-g/d increment, 0.67; 95% CI, 0.50-0.90; P = .007) and all-cause mortality (HR, 0.78; 95% CI, 0.68-0.90; P < .001); vegetable fiber was associated with lower all-cause mortality (HR, 0.83; 95% CI, 0.72-0.96; P = .009) but not CRC-specific mortality (HR, 0.82; 95% CI, 0.60-1.13; P = .22); no association was found for fruit fiber. Whole grain intake was associated with lower CRC-specific mortality (HR per 20-g/d increment, 0.72; 95% CI, 0.59-0.88; P = .002), and this beneficial association was attenuated after adjusting for fiber intake (HR, 0.77; 95% CI, 0.62-0.96; P = .02). Higher fiber intake after the diagnosis of nonmetastatic CRC is associated with lower CRC-specific and overall mortality. Increasing fiber consumption after diagnosis may confer additional benefits to patients with CRC.

Optical fiber cabling technologies for flexible access network

NASA Astrophysics Data System (ADS)

Tanji, Hisashi

2008-07-01

Fiber-to-the-home (FTTH) outside plant infrastructure should be so designed and constructed as to flexibly deal with increasing subscribers and system evolution to be expected in the future, taking minimization of total cost (CAPEX and OPEX) into consideration. With this in mind, fiber access architectures are reviewed and key technologies on optical fiber and cable for supporting flexible access network are presented. Low loss over wide wavelength (low water peak) and bend-insensitive single mode fiber is a future proof solution. Enhanced separable ribbon facilitates mid-span access to individual fibers in a cable installed, improving fiber utilizing efficiency and flexibility of distribution design. It also contributes to an excellent low PMD characteristic which could be required for video RF overlay system or high capacity long reach metro-access convergence network in the future. Bend-insensitive fiber based cabling technique including field installable connector greatly improves fiber/cable handling in installation and maintenance work.

An efficient method for supercontinuum generation in dispersion-tailored Lead-silicate fiber taper

NASA Astrophysics Data System (ADS)

Chen, Z.; Ma, S.; Dutta, N. K.

2010-08-01

In this paper we theoretically study the broadband mid-IR supercontinuum generation (SCG) in a lead-silicate microstructured fiber (the glass for simulation is SF57). The total dispersion of the fiber can be tailored by changing the core diameter of the fiber so that dispersion profiles with two zero dispersion wavelengths (ZDWs) can be obtained. Numerical simulations of the SCG process in a 4 cm long SF57 fiber/fiber taper seeded by femto-second pulses at telecommunications wavelength of 1.55 µm are presented. The results show that a fiber taper features a continuous shift of the longer zero dispersion wavelength. This extends the generated continuum to a longer wavelength region compared to fibers with fixed ZDWs. The phase-matching condition (PMC) is continuously modified in the fiber taper and the bandwidth of the generated dispersive waves (DWs) is significantly broadened.

Role of {alpha}{sub v}{beta}{sub 5} integrin receptor in endocytosis of crocidolite and its effect on intracellular glutathione levels in human lung epithelial (A549) cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pande, Priyadarshini; Mosleh, Tariq A.; Aust, Ann E.

Crocidolite, containing 27% iron by weight, is the most carcinogenic form of asbestos. Crocidolite fibers are endocytized by {alpha}{sub v}{beta}{sub 5} integrin receptors in rabbit pleural mesothelial cells. We show here that crocidolite fibers are endocytized in human lung epithelial (A549) cells and in primary small airway epithelial (SAEC) cells. Presence of the integrin {alpha}{sub v}{beta}{sub 5} blocking antibody, P1F6, significantly reduced the uptake of crocidolite fibers in A549 cells. Thus, the integrin {alpha}{sub v}{beta}{sub 5} receptor is involved in endocytosis of crocidolite fibers in A549 cells as well. Previously, it has been observed that asbestos fibers lead to changesmore » in the intracellular redox environment, i.e. a marked decrease in intracellular glutathione concentrations and an increase in the extracellular glutathione in A549 cells. In addition, the decrease in intracellular glutathione was found to be largely independent of iron present on the surface of the fiber. A549 cells were treated with crocidolite in the presence of endocytosis inhibitor cytochalasin D. Our data indicate that, upon preventing endocytosis, we were able to reverse the decrease in total intracellular glutathione. The decrease in total intracellular glutathione could also be prevented in the presence of the monoclonal antibody P1F6. Thus, we observed that endocytosis of crocidolite fibers via integrin {alpha}{sub v}{beta}{sub 5} receptor is linked to the marked decrease in total intracellular glutathione in A549 cells.« less

Total and Viable Legionella pneumophila Cells in Hot and Natural Waters as Measured by Immunofluorescence-Based Assays and Solid-Phase Cytometry ▿†

PubMed Central

Parthuisot, N.; Binet, M.; Touron-Bodilis, A.; Pougnard, C.; Lebaron, P.; Baudart, J.

2011-01-01

A new method was developed for the rapid and sensitive detection of viable Legionella pneumophila. The method combines specific immunofluorescence (IF) staining using monoclonal antibodies with a bacterial viability marker (ChemChrome V6 cellular esterase activity marker) by means of solid-phase cytometry (SPC). IF methods were applied to the detection and enumeration of both the total and viable L. pneumophila cells in water samples. The sensitivity of the IF methods coupled to SPC was 34 cells liter−1, and the reproducibility was good, with the coefficient of variation generally falling below 30%. IF methods were applied to the enumeration of total and viable L. pneumophila cells in 46 domestic hot water samples as well as in cooling tower water and natural water samples, such as thermal spring water and freshwater samples. Comparison with standard plate counts showed that (i) the total direct counts were always higher than the plate counts and (ii) the viable counts were higher than or close to the plate counts. With domestic hot waters, when the IF assay was combined with the viability test, SPC detected up to 3.4 × 103 viable but nonculturable L. pneumophila cells per liter. These direct IF methods could be a powerful tool for high-frequency monitoring of domestic hot waters or for investigating the occurrence of viable L. pneumophila in both man-made water systems and environmental water samples. PMID:21742913

Clinical Investigation Service Annual Research Progress Report Fiscal Year 1980,

DTIC Science & Technology

1980-10-01

Capillary (Heelstick) and Central ( Venous ) 136 Total White Blood Cell Counts and Differentials in Normal Newborn Infants (0) PHYSICAL MEDICINE...Comparison of Capillary (Heelstick) and Central ( Venous ) Total White Blood Cell Counts and Differentials in Normal Newborn Infants PRINCIPAL INVESTIGATOR...tolerance tests with renal glycosuria shall be evaluated. Day 1: History , physical examination, routine CBC, chest x-ray, STS, regular hospital diet (300 gm

Advanced risk assessment of the effects of graphite fibers on electronic and electric equipment, phase 1. [simulating vulnerability to airports and communities from fibers released during aircraft fires

NASA Technical Reports Server (NTRS)

Pocinki, L. S.; Kaplan, L. D.; Cornell, M. E.; Greenstone, R.

1979-01-01

A model was developed to generate quantitative estimates of the risk associated with the release of graphite fibers during fires involving commercial aircraft constructed with graphite fiber composite materials. The model was used to estimate the risk associated with accidents at several U.S. airports. These results were then combined to provide an estimate of the total risk to the nation.

Virginia Tech Campaign to Count Gifts Made to Victims

ERIC Educational Resources Information Center

Strout, Erin

2007-01-01

Virginia Tech has decided to count gifts to a memorial fund for victims of the April 16 shootings toward its goal of raising $1-billion in a capital campaign. Higher-education fund-raising experts agree that counting the memorial-fund contributions toward the total does not break common donation-reporting guidelines. Many big college fund-raising…

Evaluation of days of total collection and use of internal markers in nutritional trials with small ruminants.

PubMed

da Teixeira, Catarine S C; de Carvalho, Gleidson G P; Nicory, Isis C M; Santos, Aracele V; Dos Pina, Douglas S; de Júnior, José E F; de Araújo, Maria L G M L; de Rufino, Luana M A; Cirne, Luís G A; Pires, Aureliano J V

2018-04-01

Two experiments were conducted to evaluate the number of days required for total fecal collection and the viability of using the indigestible dry matter (iDM), indigestible neutral detergent fiber (iNDF), and indigestible acid detergent fiber (iADF) internal markers to determine the fecal excretion of dry matter (FEDM) and digestibility in nutritional trials with small ruminants. Eight sheep in the first experiment and eight goats in the second experiment were distributed into two 4 × 4 Latin square designs. There were no significant differences between days of total fecal collection for FEDM; digestibility of dry matter (DM), organic matter (OM), crude protein (CP), ether extract (EE), neutral detergent fiber corrected for ash and protein (NDFap), and non-fibrous carbohydrates corrected for ash and protein (NFCap); and total digestible nutrients (TDN) in both species. The results suggest that only 1 day of total collection is sufficient to obtain the FEDM and the digestibility of the nutritional components in sheep and goats. The markers are efficient in determining fecal production and digestibility in these animal species.

Fluorescein dye improves microscopic evaluation and counting of demodex in blepharitis with cylindrical dandruff.

PubMed

Kheirkhah, Ahmad; Blanco, Gabriela; Casas, Victoria; Tseng, Scheffer C G

2007-07-01

To show whether fluorescein dye helps detect and count Demodex embedded in cylindrical dandruff (CD) of epilated eyelashes from patients with blepharitis. Two eyelashes with CD were removed from each lid of 10 consecutive patients with blepharitis and subjected to microscopic examination with and without fluorescein solution to detect and count Demodex mites. Of 80 eyelashes examined, 36 (45%) lashes retained their CD after removal. Before addition of the fluorescein solution, the mean total Demodex count per patient was 14.9 +/- 10 and the mean Demodex count per lash was 3.1 +/- 2.5 and 0.8 +/- 0.7 in epilated eyelashes with and without retained CD, respectively (P < 0.0001). After addition of the fluorescein solution, opaque and compact CD instantly expanded to reveal embedded mites in a yellowish and semitransparent background. As a result, the mean total Demodex count per patient was significantly increased to 20.2 +/- 13.8 (P = 0.003), and the mean count per lash was significantly increased to 4.4 +/- 2.8 and 1 +/- 0.8 in eyelashes with and without retained CD (P < 0.0001 and P = 0.007), respectively. This new method yielded more mites in 8 of 10 patients and allowed mites to be detected in 3 lashes with retained CD and 1 lash without retained CD that had an initial count of zero. Addition of fluorescein solution after mounting further increases the proficiency of detecting and counting mites embedded in CD of epilated eyelashes.

Photon-counting intensified random-access charge injection device

NASA Astrophysics Data System (ADS)

Norton, Timothy J.; Morrissey, Patrick F.; Haas, Patrick; Payne, Leslie J.; Carbone, Joseph; Kimble, Randy A.

1999-11-01

At NASA GSFC we are developing a high resolution solar-blind photon counting detector system for UV space based astronomy. The detector comprises a high gain MCP intensifier fiber- optically coupled to a charge injection device (CID). The detector system utilizes an FPGA based centroiding system to locate the center of photon events from the intensifier to high accuracy. The photon event addresses are passed via a PCI interface with a GPS derived time stamp inserted per frame to an integrating memory. Here we present imaging performance data which show resolution of MCP tube pore structure at an MCP pore diameter of 8 micrometer. This data validates the ICID concept for intensified photon counting readout. We also discuss correction techniques used in the removal of fixed pattern noise effects inherent in the centroiding algorithms used and present data which shows the local dynamic range of the device. Progress towards development of a true random access CID (RACID 810) is also discussed and astronomical data taken with the ICID detector system demonstrating the photon event time-tagging mode of the system is also presented.

Lightning Current Measurement with Fiber-Optic Sensor

NASA Technical Reports Server (NTRS)

Nguyen, Truong X.; Ely, Jay J.; Szatkowski, George N.; Mata, Carlos T.; Mata, Angel G.; Snyder, Gary P.

2014-01-01

A fiber-optic current sensor is successfully developed with many potential applications for electric current measurement. Originally developed for in-flight lightning measurement, the sensor utilizes Faraday Effect in an optical fiber. The Faraday Effect causes linear light polarization in a fiber to rotate when the fiber is exposed to a magnetic field. The polarization change is detected using a reflective polarimetric scheme. Forming fiber loops and applying Ampere's law, measuring the total light rotation results in the determination of the total current enclosed. The sensor is conformable to complex structure geometry. It is also non-conductive and immune to electromagnetic interference, saturation or hysteresis. Installation is non-intrusive, and the sensor can be safely routed through flammable areas. Two similar sensor systems are described in this paper. The first system operates at 1310nm laser wavelength and is capable of measuring approximately 300 A - 300 kA, a 60 dB range. Laboratory validation results of aircraft lighting direct and in-direct effect current amplitudes are reported for this sensor. The second system operates at 1550nm wavelength and can measure about 400 A - 400 kA. Triggered-lightning measurement data are presented for this system. Good results are achieved in all cases.

Dietary fiber intake reduces risk for Barrett's esophagus and esophageal cancer.

PubMed

Sun, Lingli; Zhang, Zhizhong; Xu, Jian; Xu, Gelin; Liu, Xinfeng

2017-09-02

Observational studies suggest an association between dietary fiber intake and risk of Barrett's esophagus and esophageal cancer. However, the results are inconsistent. To conduct a meta-analysis of observational studies to assess this association. All eligible studies were identified by electronic searches in PubMed and Embase through February 2015. Dose-response, subgroup, sensitivity, and publication bias analyses were performed. A total of 15 studies involving 16,885 subjects were included in the meta-analysis. The pooled odds ratio for the highest compared with the lowest dietary fiber intake was 0.52 (95% CI, 0.43-0.64). Stratified analyses for tumor subtype, study design, geographic location, fiber type, publication year, total sample size, and quality score yielded consistent results. Dose-response analysis indicated that a 10-g/d increment in dietary fiber intake was associated with a 31% reduction in Barrett's esophagus and esophageal cancer risk. Sensitivity analysis restricted to studies with control for conventional risk factors produced similar results, and omission of any single study had little effect on the overall risk estimate. Our findings indicate that dietary fiber intake is inversely associated with risk of Barrett's esophagus and esophageal cancer. Further large prospective studies are warranted.

Lightweight Ceramic Insulation

NASA Technical Reports Server (NTRS)

Wheeler, W. H.; Creedon, J. F.

1986-01-01

Fiber burnout process yields low densities. Low density attained by process of sacrificial burnout. Graphite or carbon fibers mixed into slurry of silica, alumina, and boron-compound fibers in amounts ranging from 25 to 75 percent of total fiber content by weight. Mixture formed into blocks and dried. Blocks placed in kiln and heated to 1,600 degrees F(870 degrees C) for several hours. Graphite or carbon fibers slowly oxidize away, leaving voids and reducing block density. Finally, blocks heated to 2,350 degrees F (1,290 degrees C) for 90 minutes to bond remaining ceramic fibers together. Developed for use on Space Shuttle and other spacecraft, rigid insulation machined to requisite shape and bonded in place.

Fiber laser at 2 μm for soft tissue surgery

NASA Astrophysics Data System (ADS)

Ghosh, Aditi; Pal, Debasis; Sen, Ranjan; Pal, Atasi

2014-11-01

Strong water absorption at 2 μm generated recent interest in lasers at this wavelength for soft tissue surgery. A fiber Bragg grating-based, all-fiber, continuous-wave, cladding pumped, thulium-doped fiber laser at 1.95 μm is configured. The thulium-doped active fiber with octagonal-shaped inner cladding is pumped at 808 nm (total power of 17 W) with six laser diodes through a combiner. The laser power of 3.3 W (after elimination of unabsorbed pump power through a passive fiber) with slope efficiency of 23% (against launched pump power) is achieved. The linear variation of laser power with pump offers scope of further power scaling.

Hypolipidemic effect of hemicellulose component of coconut fiber.

PubMed

Sindhurani, J A; Rajamohan, T

1998-08-01

The neutral detergent fiber (NDF) isolated from coconut kernel was digested with cellulase and hemicellulase and the residual fiber rich in hemicellulose (without cellulose) and cellulose (with out hemicellulose) were fed to rats and compared with a fiber free group. The results indicate that hemicellulose rich fiber showed decreased concentration of total cholesterol, LDL + VLDL cholesterol and increased HDL cholesterol, while cellulose rich fiber showed no significant alteration. There was increased HMG CoA reductase activity and increased incorporation of labeled acetate into free cholesterol. Rats fed hemicellulose rich coconut fiber produced lower concentration of triglycerides and phospholipids and lower release of lipoproteins into circulation. There was increased concentration of hepatic bile acids and increased excretion of faecal sterols and bile acids. These results indicate that the hemicellulose component of coconut fiber was responsible for the observed hypolipidemic effect.

Photonic-crystal fiber as a multifunctional optical sensor and sample collector.

PubMed

Konorov, Stanislav; Zheltikov, Aleksei; Scalora, Michael

2005-05-02

Two protocols of optical sensing realized with the same photonic-crystal fiber are compared. In the first protocol, diode-laser radiation is delivered to a sample through the central core of a dual-cladding photonic-crystal fiber with a diameter of a few micrometers, while the large-diameter fiber cladding serves to collect the fluorescent response from the sample and to guide it to a detector in the backward direction. In the second scheme, liquid sample is collected by a microcapillary array in the fiber cladding and is interrogated by laser radiation guided in the fiber modes. For sample fluids with refractive indices exceeding the refractive index of the fiber material, fluid channels in photonic-crystal fibers can guide laser light by total internal reflection, providing an 80% overlap of interrogating radiation with sample fluid.

The impact of extrusion on the nutritional composition, dietary fiber and in vitro digestibility of gluten-free snacks based on rice, pea and carob flour blends.

PubMed

Arribas, C; Cabellos, B; Sánchez, C; Cuadrado, C; Guillamón, E; Pedrosa, M M

2017-10-18

Consumers and the food industry are demanding healthier products. Expanded snacks with a high nutritional value were developed from different rice, pea and carob flour blends. The proximate composition, starch (total and resistant), amylose and amylopectin, dietary fiber (soluble and insoluble) contents, and the in vitro protein digestibility of different rice-legume formulations, were evaluated before and after the extrusion process. Compared with the corresponding non-extruded blends (control), the extrusion treatment did not change the total protein content, however, it reduced the soluble protein (61-86%), the fat (69-92%) and the resistant starch contents (100%). The total starch content of all studied blends increased (2-19%) after extrusion. The processing increased the in vitro protein digestibility, reaching values around 88-95% after extrusion. Total dietary fiber was reduced around 30%, and the insoluble fraction was affected to a larger extent than the soluble fraction by the extrusion process. Because of its balanced nutritional composition, high dietary fiber content, as well as low energy density, these novel gluten-free snack-like foods could be considered as functional foods and a healthier alternative to commercially available gluten-containing or gluten-free and low nutritional value snacks.

A Multi-Week Behavioral Sampling Tag for Sound Effects Studies: Design Trade-Offs and Prototype Evaluation

DTIC Science & Technology

2014-09-30

to establish the performance of algorithms detecting dives, strokes , clicks, respiration and gait changes. We have also found that a combination of...whale click count, total click count, vocal duration, SOC2 depth, EOC3 depth) Descent 40 bits (duration, vertical speed, stroke count 0...100 m, stroke count 100-400 m, OBDA4, sum sr35) Bottom 26 bits (movement index6, OBDA, jerk events7, median jerk depth) Ascent

Evaluation of the performance of a point-of-care method for total and differential white blood cell count in clozapine users.

PubMed

Bui, H N; Bogers, J P A M; Cohen, D; Njo, T; Herruer, M H

2016-12-01

We evaluated the performance of the HemoCue WBC DIFF, a point-of-care device for total and differential white cell count, primarily to test its suitability for the mandatory white blood cell monitoring in clozapine use. Leukocyte count and 5-part differentiation was performed by the point-of-care device and by routine laboratory method in venous EDTA-blood samples from 20 clozapine users, 20 neutropenic patients, and 20 healthy volunteers. From the volunteers, also a capillary sample was drawn. Intra-assay reproducibility and drop-to-drop variation were tested. The correlation between both methods in venous samples was r > 0.95 for leukocyte, neutrophil, and lymphocyte counts. The correlation between point-of-care (capillary sample) and routine (venous sample) methods for these cells was 0.772; 0.817 and 0.798, respectively. Only for leukocyte and neutrophil counts, the intra-assay reproducibility was sufficient. The point-of-care device can be used to screen for leukocyte and neutrophil counts. Because of the relatively high measurement uncertainty and poor correlation with venous samples, we recommend to repeat the measurement with a venous sample if cell counts are in the lower reference range. In case of clozapine therapy, neutropenia can probably be excluded if high neutrophil counts are found and patients can continue their therapy. © 2016 John Wiley & Sons Ltd.

Longitudinal trends of total white blood cell and differential white blood cell counts of atomic bomb survivors.

PubMed

Hsu, Wan-Ling; Tatsukawa, Yoshimi; Neriishi, Kazuo; Yamada, Michiko; Cologne, John; Fujiwara, Saeko

2010-01-01

In studying the late health effects of atomic-bomb (A-bomb) survivors, earlier findings were that white blood cell (WBC) count increased with radiation dose in cross-sectional studies. However, a persistent effect of radiation on WBC count and other risk factors has yet to be confirmed. The objectives of the present study were 1) to examine the longitudinal relationship between A-bomb radiation dose and WBC and differential WBC counts among A-bomb survivors and 2) to investigate the potential confounding risk factors (such as age at exposure and smoking status) as well as modification of the radiation dose-response. A total of 7,562 A-bomb survivors in Hiroshima and Nagasaki were included in this study from 1964-2004. A linear mixed model was applied using the repeated WBC measurements. During the study period, a secular downward trend of WBC count was observed. Radiation exposure was a significant risk factor for elevated WBC and differential WBC counts over time. A significant increase of WBC counts among survivors with high radiation dose (> 2 Gy) was detected in men exposed below the age of 20 and in women regardless of age at exposure. Effects on WBC of low dose radiation remain unclear, however. Cigarette smoking produced the most pronounced effect on WBC counts and its impact was much larger than that of radiation exposure.

Directing Spinal Cord Plasticity: The Impact of Stretch Therapy on Functional Recovery After SCI

DTIC Science & Technology

2017-03-01

did immunohistochemistry for cFOS, an immediate-early gene commonly used as a marker for neuronal activity. We stained sections from L1-L5 and counted...lumbar spinal cord stained for cFOS with labeled nuclei throughout the intermediate gray matter. Importantly, even the CAP animals (C-fiber depleted...in tissue freezing medium. Transverse sections were cut at 30 lm and stained for spared white matter using eriochrome cyanine (EC).27 Photomicrographs

Immobilization of Energetics on Live Fire Ranges (CU-1229). Revision 1.0

DTIC Science & Technology

2004-07-31

Its cost ultimately may be prohibitive for large scale application in some areas, but its humic composition should aid adsorption of energetics and/or...acetonitrile) to sterile glass bottles, evaporating the solvent under a stream of nitrogen, adding a known volume of CaCl2, and sonicating/mixing until all...filtration)- Same as (a) above, except that the cleared supernatant was passed through a 0.45 µm glass fiber syringe filter prior to scintillation counting

[Analysis of the microbiological quality and potential presence of Listeria monocytogenes in custard apple (Annona muricata), mango (Mangifera indica) and passion fruit (Passiflora edulis) pulps from Costa Rica].

PubMed

von Breymann, Juliana; Chaves, Carolina; Arias, María Laura

2013-03-01

The objective of this work was to determine some of the indicators associated to shelf life, hygiene, process and storage conditions for some of custard apple, mango and passion fruit pulps distributed by the main supermarket chains of the Metropolitan Area of San José, Costa Rica, as well as to examine the potential presence of Listeria monocytogenes in them. Sixty fruit pulp samples were analyzed. Tests included pH determination, total aerobic plate count, yeasts and mold count, lactic bacteria count, total and fecal most probable number and the presence/absence of Listeria monocytogenes in 25 g of the product. Fruit pulp's pH ranged between 3,1 and 3,9, and the microbiological counts obtained were relatively low except for one industry. None of the samples analyzed presented total or fecal coliforms. The presence of Listeria monocytogenes was confirmed in three samples, all of them coming from industry C. Low microbiological counts obtained may be due to the addition of preserving substances and to the pasteurization of some of the products; lack of these two elements may allow the presence of dangerous bacteria such as Listeria monocytogenes.

Measurement of 224Ra and 226Ra activities in natural waters using a radon-in-air monitor

USGS Publications Warehouse

Kim, G.; Burnett, W.C.; Dulaiova, H.; Swarzenski, P.W.; Moore, W.S.

2001-01-01

We report a simple new technique for measuring low-level radium isotopes (224Ra and 226Ra) in natural waters. The radium present in natural waters is first preconcentrated onto MnO2-coated acrylic fiber (Mn fiber) in a column mode. The radon produced from the adsorbed radium is then circulated through a closed air-loop connected to a commercial radon-in-air monitor. The monitor counts alpha decays of radon daughters (polonium isotopes) which are electrostatically collected onto a silicon semiconductor detector. Count data are collected in energy-specific windows, which eliminate interference and maintain very low backgrounds. Radium-224 is measured immediately after sampling via 220Rn (216Po), and 226Ra is measured via 222Rn (218Po) after a few days of ingrowth of 222Rn. This technique is rapid, simple, and accurate for measurements of low-level 224Ra and 226Ra activities without requiring any wet chemistry. Rapid measurements of short-lived 222Rn and 224Ra, along with long-lived 226Ra, may thus be made in natural waters using a single portable system for environmental monitoring of radioactivity as well as tracing of various geochemical and geophysical processes. The technique could be especially useful for the on-site rapid determination of 224Ra which has recently been found to occur at elevated activities in some groundwater wells.

Vacuum Nuller Testbed Performance, Characterization and Null Control

NASA Technical Reports Server (NTRS)

Lyon, R. G.; Clampin, M.; Petrone, P.; Mallik, U.; Madison, T.; Bolcar, M.; Noecker, C.; Kendrick, S.; Helmbrecht, M. A.

2011-01-01

The Visible Nulling Coronagraph (VNC) can detect and characterize exoplanets with filled, segmented and sparse aperture telescopes, thereby spanning the choice of future internal coronagraph exoplanet missions. NASA/Goddard Space Flight Center (GSFC) has developed a Vacuum Nuller Testbed (VNT) to advance this approach, and assess and advance technologies needed to realize a VNC as a flight instrument. The VNT is an ultra-stable testbed operating at 15 Hz in vacuum. It consists of a MachZehnder nulling interferometer; modified with a "W" configuration to accommodate a hexpacked MEMS based deformable mirror (DM), coherent fiber bundle and achromatic phase shifters. The 2-output channels are imaged with a vacuum photon counting camera and conventional camera. Error-sensing and feedback to DM and delay line with control algorithms are implemented in a real-time architecture. The inherent advantage of the VNC is that it is its own interferometer and directly controls its errors by exploiting images from bright and dark channels simultaneously. Conservation of energy requires the sum total of the photon counts be conserved independent of the VNC state. Thus sensing and control bandwidth is limited by the target stars throughput, with the net effect that the higher bandwidth offloads stressing stability tolerances within the telescope. We report our recent progress with the VNT towards achieving an incremental sequence of contrast milestones of 10(exp 8) , 10(exp 9) and 10(exp 10) respectively at inner working angles approaching 2A/D. Discussed will be the optics, lab results, technologies, and null control. Shown will be evidence that the milestones have been achieved.

Evaluation of a clay-based acidic bedding conditioner for dairy cattle bedding.

PubMed

Proietto, R L; Hinckley, L S; Fox, L K; Andrew, S M

2013-02-01

This study investigated the effects of a clay-based acidic bedding conditioner on sawdust bedding pH, dry matter (DM), environmental pathogen counts, and environmental bacterial counts on teat ends of lactating dairy cows. Sixteen lactating Holstein cows were paired based on parity, days in milk, milk yield, and milk somatic cell count, and were negative for the presence of an intramammary pathogen. Within each pair, cows were randomly assigned to 1 of 2 treatments with 3-wk periods in a crossover design. Treatment groups consisted of 9 freestalls per group bedded with either untreated sawdust or sawdust with a clay-based acidic bedding conditioner, added at 3- to 4-d intervals over each 21-d period. Bedding and teat ends were aseptically sampled on d 0, 1, 2, 7, 14, and 21 for determination of environmental bacterial counts. At the same time points, bedding was sampled for DM and pH determination. The bacteria identified in the bedding material were total gram-negative bacteria, Streptococcus spp., and coliform bacteria. The bacteria identified on the teat ends were Streptococcus spp., coliform bacteria, and Klebsiella spp. Teat end score, milk somatic cell count, and intramammary pathogen presence were measured weekly. Bedding and teat cleanliness, environmental high and low temperatures, and dew point data were collected daily. The bedding conditioner reduced the pH, but not the DM, of the sawdust bedding compared with untreated sawdust. Overall environmental bacterial counts in bedding were lower for treated sawdust. Total bacterial counts in bedding and on teat ends increased with time over both periods. Compared with untreated sawdust, the treated bedding had lower counts of total gram-negative bacteria and streptococci, but not coliform counts. Teat end bacterial counts were lower for cows bedded on treated sawdust for streptococci, coliforms, and Klebsiella spp. compared with cows bedded on untreated sawdust. The clay-based acidic bedding conditioner reduced environmental pathogens in sawdust bedding and teat ends without affecting teat end integrity. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Development of a real-time radon monitoring system for simultaneous measurements in multiple sites

NASA Astrophysics Data System (ADS)

Yamamoto, S.; Yamasoto, K.; Iida, T.

1999-12-01

A real-time radon monitoring system that can simultaneously measure radon concentrations in multiple sites was developed and tested. The system consists of maximum of four radon detectors, optical fiber cables and a data acquisition personal computer. The radon detector uses a plastic scintillation counter that collects radon daughters in the chamber electrostatically. The applied voltage on the photocathode for the photomultiplier tube (PMT) acts as an electrode for radon daughters. The thickness of the plastic scintillator was thin, 50 /spl mu/m, so as to minimize the background counts due to the environmental gamma rays or beta particles. The energy discriminated signals from the radon detectors are fed to the data acquisition personal computer via optical fiber cables. The system made it possible to measure the radon concentrations in multiple sites simultaneously.

Image analysis software for following progression of peripheral neuropathy

NASA Astrophysics Data System (ADS)

Epplin-Zapf, Thomas; Miller, Clayton; Larkin, Sean; Hermesmeyer, Eduardo; Macy, Jenny; Pellegrini, Marco; Luccarelli, Saverio; Staurenghi, Giovanni; Holmes, Timothy

2009-02-01

A relationship has been reported by several research groups [1 - 4] between the density and shapes of nerve fibers in the cornea and the existence and severity of peripheral neuropathy. Peripheral neuropathy is a complication of several prevalent diseases or conditions, which include diabetes, HIV, prolonged alcohol overconsumption and aging. A common clinical technique for confirming the condition is intramuscular electromyography (EMG), which is invasive, so a noninvasive technique like the one proposed here carries important potential advantages for the physician and patient. A software program that automatically detects the nerve fibers, counts them and measures their shapes is being developed and tested. Tests were carried out with a database of subjects with levels of severity of diabetic neuropathy as determined by EMG testing. Results from this testing, that include a linear regression analysis are shown.

Microinterferometer transducer

DOEpatents

Corey, III, Harry S.

1979-01-01

An air-bearing microinterferometer transducer is provided for increased accuracy, range and linearity over conventional displacement transducers. A microinterferometer system is housed within a small compartment of an air-bearing displacement transducer housing. A movable cube corner reflector of the interferometer is mounted to move with the displacement gauging probe of the transducer. The probe is disposed for axial displacement by means of an air-bearing. Light from a single frequency laser is directed into an interferometer system within the transducer housing by means of a self-focusing fiber optic cable to maintain light coherency. Separate fringe patterns are monitored by a pair of fiber optic cables which transmit the patterns to a detecting system. The detecting system includes a bidirectional counter which counts the light pattern fringes according to the direction of movement of the probe during a displacement gauging operation.

Effect of Germination and Fermentation on Carbohydrate Composition of Australian Sweet Lupin and Soybean Seeds and Flours.

PubMed

Kaczmarska, Kornelia T; Chandra-Hioe, Maria V; Zabaras, Dimitrios; Frank, Damian; Arcot, Jayashree

2017-11-22

This study investigated the effect of germination and fermentation on the composition of carbohydrates in Australian sweet lupin. Specifically, the amount of sugars (sucrose, fructose, and glucose), starch, oligosaccharides (verbascose, stachyose, and raffinose), and dietary fiber were measured in germinated lupin seeds and fermented lupin flour, and compared with those in soy. High performance liquid chromatography coupled with refractive index was employed for quantitation of sugars, starch, and oligosaccharides, and gas chromatography coupled with a flame ionization detector was used for quantitation of simple sugars in total, and soluble, and insoluble dietary fiber. The enzyme activities of α-amylase and α-glucosidase were compared before and after germination or fermentation. The α-amylase activity in germinated lupin increased to  ∼17 nmol/mL/min/0.1 g and in germinated soy∼32; in fermented lupin, the activity increased to ∼52, while in fermented soy it decreased to ∼20. In general, germination or fermentation decreased the oligosaccharide content, and increased the total sugar in samples (p < 0.05). Total oligosaccharides in lupin after uncontrolled germination were reduced by 98% to 6 mg/g, and after controlled germination reduced by 44% to 86 mg/g. Fermentation with yogurt culture lowered the content of total oligosaccharides due to 94% decrease in stachyose. Total oligosaccharides in soy flour prior to fermentation were 180 mg/g and significantly decreased to ∼124 mg/g in fermented soy. Germination did not affect the starch content. There was no significant change in the amounts of total, soluble, and insoluble dietary fiber after germination or fermentation of lupin except for galactose, which was significantly reduced in germinated lupin seeds. Soluble dietary fiber in germinated soy significantly increased. Germination and fermentation are simple and effective techniques to reduce the oligosaccharides while maintaining the composition of dietary fibers.

An Intrinsic Fiber-Optic Sensor for Structure Lightning Current Measurement

NASA Technical Reports Server (NTRS)

Nguyen, Truong X.; Ely, Jay J.; Szatkowski, George N.; Mata, Carlos T.; Mata, Angel. G.; Snyder, Gary P.

2014-01-01

An intrinsic optical-fiber sensor based on Faraday Effect is developed that is highly suitable for measuring lightning current on aircraft, towers and complex structures. Originally developed specifically for aircraft installations, it is light-weight, non-conducting, structure conforming, and is immune to electromagnetic interference, hysteresis and saturation. It can measure total current down to DC. When used on lightning towers, the sensor can help validate other sensors and lightning detection network measurements. Faraday Effect causes light polarization to rotate when the fiber is exposed to a magnetic field in the direction of light propagation. Thus, the magnetic field strength can be determined from the light polarization change. By forming closed fiber loops and applying Ampere's law, measuring the total light rotation yields the total current enclosed. A broadband, dual-detector, reflective polarimetric scheme allows measurement of both DC component and AC waveforms with a 60 dB dynamic range. Two systems were built that are similar in design but with slightly different sensitivities. The 1310nm laser system can measure 300 A - 300 kA, and has a 15m long sensing fiber. It was used in laboratory testing, including measuring current on an aluminum structure simulating an aircraft fuselage or a lightning tower. High current capabilities were demonstrated up to 200 kA at a lightning test facility. The 1550nm laser system can measure 400 A - 400 kA and has a 25m fiber length. Used in field measurements, excellent results were achieved in the summer of 2012 measuring rocket-triggered lightning at the International Center for Lightning Research and Testing (ICLRT), Camp Blanding, Florida. In both systems increased sensitivity can be achieved with multiple fiber loops. The fiber optic sensor provides many unique capabilities not currently possible with traditional sensors. It represents an important new tool for lightning current measurement where low weight, complex shapes, large structure dimension, large current, and low frequency capabilities are important considerations.

Comparison of culture and qPCR methods in detection of mycobacteria from drinking waters.

PubMed

Räsänen, Noora H J; Rintala, Helena; Miettinen, Ilkka T; Torvinen, Eila

2013-04-01

Environmental mycobacteria are common bacteria in man-made water systems and may cause infections and hypersensitivity pneumonitis via exposure to water. We compared a generally used cultivation method and a quantitative polymerase chain reaction (qPCR) method to detect mycobacteria in 3 types of drinking waters: surface water, ozone-treated surface water, and groundwater. There was a correlation between the numbers of mycobacteria obtained by cultivation and qPCR methods, but the ratio of the counts obtained by the 2 methods varied among the types of water. The qPCR counts in the drinking waters produced from surface or groundwater were 5 to 34 times higher than culturable counts. In ozone-treated surface waters, both methods gave similar counts. The ozone-treated drinking waters had the highest concentration of assimilable organic carbon, which may explain the good culturability. In warm tap waters, qPCR gave 43 times higher counts than cultivation, but both qPCR counts and culturable counts were lower than those in the drinking waters collected from the same sites. The TaqMan qPCR method is a rapid and sensitive tool for total quantitation of mycobacteria in different types of clean waters. The raw water source and treatments affect both culturability and total numbers of mycobacteria in drinking waters.

Effect of source of trace minerals in either forage- or by-product-based diets fed to dairy cows: 1. Production and macronutrient digestibility.

PubMed

Faulkner, M J; Weiss, W P

2017-07-01

Excess rumen-soluble Cu and Zn can alter rumen microbial populations and reduce fiber digestibility. Because of differences in particle size and chemical composition, ruminal and total-tract digestibility of fiber from forage- and by-product-based diets can differ. We hypothesized that, because of differences in mineral solubility, diets with hydroxy rather than sulfate trace minerals would have greater fiber digestibility, but the effect may depend on source of fiber. Eighteen multiparous cows were used in a split-plot replicated Latin square with two 28-d periods to evaluate the effects of Cu, Zn, and Mn source (sulfates or hydroxy; Micronutrients USA LLC, Indianapolis, IN) and neutral detergent fiber (NDF) source (forage diet = 26% NDF vs. by-product = 36%) on total-tract nutrient digestibility. During the entire experiment (56 d) cows remained on the same fiber treatment, but source of supplemental trace mineral was different for each 28-d period so that all cows were exposed to both mineral treatments. During each of the two 28-d periods, cows were fed no supplemental Cu, Zn, or Mn for 16 d followed by 12 d of feeding supplemental Cu, Zn, and Mn from either sulfates or hydroxy sources. Supplemental minerals for each of the mineral sources fed provided approximately 10, 35, and 32 mg/kg of supplemental Cu, Zn, and Mn, respectively, for both fiber treatments. Total dietary concentrations of Cu, Zn, and Mn were approximately 19, 65, and 70 mg/kg for the forage diets and 21, 85, and 79 mg/kg for the by-product diets, respectively. Treatment had no effect on dry matter intake (24.2 kg/d) or milk production (34.9 kg/d). Milk fatty acid profiles were altered by fiber source, mineral source, and their interaction. Cows fed the by-product diets had lower dry matter (65.9 vs. 70.2%), organic matter (67.4 vs. 71.7%), and crude protein digestibility (58.8 vs. 62.1%) but greater starch (97.5 vs. 96.3%) and NDF digestibility (50.5 vs. 44.4%) compared with cows fed the forage treatment. Feeding increased concentrations of by-products decreased total digestible nutrients regardless of mineral source. Feeding hydroxy Cu, Zn, and Mn increased NDF digestibility (48.5 vs. 46.4%) but had no effect on total digestible nutrients. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Rumen passage kinetics of forage- and concentrate-derived fiber in dairy cows.

PubMed

Krämer, M; Lund, P; Weisbjerg, M R

2013-05-01

Rumen passage kinetics of forage and concentrate fiber were analyzed to determine intrinsic feed effects and extrinsic ration effects on the retention time of fiber in the rumen. Sixteen Danish Holstein cows (557 ± 37 kg of body weight, 120 ± 21 d in milk, mean ± SD), 8 fitted with ruminal cannulas, were used in a completely randomized block experiment. Treatments differed in forage type (corn silage vs. grass silage) and forage:concentrate ratio (50:50 vs. 75:25 on organic matter basis). Fiber passage kinetics were studied based on rumen evacuations and on marker excretion profiles in feces fitted to 1 and 2 pool models. Each cow received ytterbium (Yb)-labeled fiber of the forage fed in the ration, samarium (Sm)-labeled fiber of the forage not fed in the ration, and concentrate fiber labeled with lanthanum (La), all as a single pulse dose. Nineteen fecal grab samples were taken per cow. Rumen liquid passage was studied using chromium-EDTA dosed as a single pulse into the rumen, followed by sampling of rumen liquid from both the ventral and medial rumen. Rumen mean retention time did not differ between forages when based on Yb-excretion profiles but was numerically longer for grass silage- than for corn silage-based rations using rumen evacuation data. Liquid rate of passage did not differ when calculated from medial or ventral rumen liquid samples, indicating that estimates for the probability of rumen liquid escape were independent of rumen sampling site. Total mean retention time decreased from forage fiber to concentrate fiber to liquid. The forage type itself (corn silage or grass silage) rather than the ration composition seemed to determine the total-tract retention time of forage fiber. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Total dietary fiber composition of diets used for management of obesity and diabetes mellitus in cats.

PubMed

Owens, Tammy J; Larsen, Jennifer A; Farcas, Amy K; Nelson, Richard W; Kass, Philip H; Fascetti, Andrea J

2014-07-01

To determine total dietary fiber (TDF) composition of feline diets used for management of obesity and diabetes mellitus. Cross-sectional survey. Dry veterinary (n = 10), canned veterinary (12), and canned over-the-counter (3) feline diets. Percentage of TDF as insoluble dietary fiber (IDF), high-molecular-weight soluble dietary fiber (HMWSDF), and low-molecular-weight soluble dietary fiber (LMWSDF) was determined. Median measured TDF concentration was greater than reported maximum crude fiber content in dry and canned diets. Median TDF (dry-matter) concentration in dry and canned diets was 12.2% (range, 8.11% to 27.16%) and 13.8% (range, 4.7% to 27.9%), respectively. Dry and canned diets, and diets with and without a source of oligosaccharides in the ingredient list, were not different in energy density or concentrations of TDF, IDF, HMWSDF, or LMWSDF. Similarly, loaf-type (n = 11) and gravy-type (4) canned diets differed only in LMWSDF concentration. Disparities in TDF concentrations among products existed despite a lack of differences among groups. Limited differences in TDF concentration and dietary fiber composition were detected when diets were compared on the basis of carbohydrate concentration. Diets labeled for management of obesity were higher in TDF concentration and lower in energy density than diets for management of diabetes mellitus. Diets provided a range of TDF concentrations with variable concentrations of IDF, HMWSDF, and LMWSDF. Crude fiber concentration was not a reliable indicator of TDF concentration or dietary fiber composition. Because carbohydrate content is calculated as a difference, results suggested that use of crude fiber content would cause overestimation of both carbohydrate and energy content of diets.

Dietary fiber intake in early pregnancy and risk of subsequent preeclampsia.

PubMed

Qiu, Chunfang; Coughlin, Kara B; Frederick, Ihunnaya O; Sorensen, Tanya K; Williams, Michelle A

2008-08-01

Substantial epidemiological evidence documents diverse health benefits, including reduced risks of hypertension, associated with diets high in fiber. Few studies, however, have investigated the extent to which dietary fiber intake in early pregnancy is associated with reductions in preeclampsia risk. We assessed the relationship between maternal dietary fiber intake in early pregnancy and risk of preeclampsia. We also evaluated cross-sectional associations of maternal early pregnancy plasma lipid and lipoprotein concentrations with fiber intake. The study population comprised 1,538 pregnant Washington State residents. A 121-item food frequency questionnaire (FFQ) was used to assess maternal dietary intake, 3 months before and during early pregnancy; and generalized linear regression procedures were used to derive relative risk (RR) and 95% confidence intervals (CIs). Dietary total fiber intake was associated with reduced preeclampsia risk. After adjusting for confounders, the RR of preeclampsia for women in the highest (> or =21.2 g/day) vs. the lowest quartile (<11.9 g/day) was 0.28 (95% CI = 0.11-0.75). We observed associations of similar magnitude when the highest vs. the lowest quartiles of water-soluble fiber (RR = 0.30; 95% CI = 0.11-0.86) and insoluble fiber (RR = 0.35; 95% CI = 0.14-0.87) were evaluated. Mean triglyceride concentrations were lower (-11.9 mg/dl, P = 0.02) and high-density lipoprotein cholesterol concentrations were higher (+2.63 mg/dl, P = 0.09) for women in the highest quartile vs. those in the lowest quartile. These findings of reduced preeclampsia risk with higher total fiber intake corroborate an earlier report; and expand the literature by providing evidence, which suggests that dietary fiber may attenuate pregnancy-associated dyslipidemia, an important clinical characteristic of preeclampsia.

In vitro ovine articular chondrocyte proliferation: experiments and modelling.

PubMed

Mancuso, L; Liuzzo, M I; Fadda, S; Pisu, M; Cincotti, A; Arras, M; La Nasa, G; Concas, A; Cao, G

2010-06-01

This study focuses on analysis of in vitro cultures of chondrocytes from ovine articular cartilage. Isolated cells were seeded in Petri dishes, then expanded to confluence and phenotypically characterized by flow cytometry. The sigmoidal temporal profile of total counts was obtained by classic haemocytometry and corresponding cell size distributions were measured electronically using a Coulter Counter. A mathematical model recently proposed (1) was adopted for quantitative interpretation of these experimental data. The model is based on a 1-D (that is, mass-structured), single-staged population balance approach capable of taking into account contact inhibition at confluence. The model's parameters were determined by fitting measured total cell counts and size distributions. Model reliability was verified by predicting cell proliferation counts and corresponding size distributions at culture times longer than those used when tuning the model's parameters. It was found that adoption of cell mass as the intrinsic characteristic of a growing chondrocyte population enables sigmoidal temporal profiles of total counts in the Petri dish, as well as cell size distributions at 'balanced growth', to be adequately predicted.

Fortification of seaweed (Eucheuma cottonii) flour on nutrition, iodine, and glycemic index of pasta

NASA Astrophysics Data System (ADS)

Firdaus, Muhamad; Yahya; Raditya Hardany Nugraha, Galih; Dwi Utari, Dyah

2017-10-01

Pasta is a nutritious and energy product which produced from the dough of wheat flour and water. It contains less of iodine and high of glycemic index. Euchema cottonii belongs of red seaweed is food substance that contains much of iodine and dietary fiber. The objective of this study was to know the fortification effect of E. cottonii flour on the nutrition, iodine, and glycemic index of pasta. E. cottonii was collected from the culture farm of E. cottonii on the Wongsorejo beach, District of Banyuwangi, East Java on April-June 2015. Wheat flour and pasta ingredients were obtained locally at shops of Pasar Besar, Malang. Pasta was produced by weighing of components, mixing, dough, milling, steaming and drying. E. cottonii flour was added on mixing process at 0; 7; 14 and 21 % of ingredients. The parameter of this study was the level of water, lipid, protein, ash, and carbohydrate (by difference), iodine, crude fiber, the total of dietary fiber, soluble fiber, insoluble fiber, and glycemic index, respectively. Data were analyzed by variance and the least square difference used to determine the difference between treatments. The highest concentration group showed more nutritious than other treatments. The characters of its product were water 6.70%, lipid 2.26%, protein 23.09%, ash 14.11%, carbohydrate 53.84%, iodine 3.71 ppm, crude fiber 8.02%, the total of dietary fiber 20.88%, soluble fiber 11.69%, insoluble fiber 9.19%, and glycemic index 44.45, respectively. In conclusion, the fortification of E. cottonii flour enhances the nutrition value, iodine content, and glycemic index of pasta.

[Fiber intake and colonic transit time in functional constipated patients].

PubMed

Lopes, Adriana Cruz; Victoria, Carlos Roberto

2008-01-01

Patients with functional constipation presenting no response to treatment using fibers supplement represents important clinical issue. To evaluate the relations among the amount of ingested fiber, the constipation intensity and the colonic transit time in patients with functional constipation. We evaluated 30 patients, presenting no response to treatment using fibers supplement, and 18 healthy volunteers conducting individual inquiry into fibers intake, constipation intensity and the total and segmental colonic transit evaluation using radiopaque markers. In the constipated, despite the good level of fiber intake (26.3 +/- 12.9 g, constipated x 9.3 +/- 5,2 g, control), the symptoms of constipation was serious (score = 21.3 +/- 4.07). Mean total colonic transit was 58.8h. The colonic transit was slower in the constipated group (41.0 +/- 22.8 hours, constipated x 21.8 +/- 18.5h, control). In constipated patients with slow colonic transit (>58.8h) there were colonic inertia (eight), outlet constipation (one) and slow transit in left colon (one), and among constipated patients with normal colonic transit (<58.8h), there were isolated slow transit, in the right colon (nine), left colon (three) and in the rectosigmoid segment (eight). There were no relation among the amount of ingested fiber, constipation intensity and the colon transit. In the functional constipation the gravity of symptoms does not depend only on the dietary fibers intake, which is not the only responsible for the differences in the colonic transit. The colonic transit can differentiate normal from constipated patients and, among them, those with altered transit that demand approaches distinct of fiber supplementation.

Peripapillary nerve fiber layer thickness measurement reproducibility using optical coherence tomography.

PubMed

Villain, Max A; Greenfield, David S

2003-01-01

To assess reproducibility of quadrantic and clock hour sectors of retinal nerve fiber layer thickness in normal eyes using optical coherence tomography. Normal eyes of healthy volunteers meeting eligibility criteria were imaged by two inexperienced operators. Six 360 degrees circular scans with a diameter of 3.4 mm centered on the optic disc were obtained during each scanning session, and a baseline image was formed using 3 high-quality images defined by the software. Images were obtained on three different days within a 4-week period. Variance and coefficient of variation (CV) were calculated for quadrantic and retinal nerve fiber layer clock hour sectors obtained from the baseline image. Five normal eyes were scanned. Intraoperator reproducibility was high. The mean (+/- SD) CV for total retinal nerve fiber layer thickness was 5.3 +/- 3.82% and 4.33 +/- 3.7% for operators 1 and 2, respectively. Interoperator reproducibility was good with statistically similar variance for all quadrantic and clock hour retinal nerve fiber layer parameters (P = .42 to .99). The nasal retinal nerve fiber layer was the most variable sector for both operators (mean CV: 10.42% and 7.83% for operators 1 and 2, respectively). Differences in mean total, nasal, temporal, and superior retinal nerve fiber layer thickness were not statistically significant between operators for all eyes; however, for inferior retinal nerve fiber layer thickness, there was a significant (P = .0007) difference between operators in one eye. Peripapillary retinal nerve fiber layer thickness assessments using optical coherence tomography have good intraoperator and interoperator reproducibility. Inexperienced operators can generate useful measurement data with acceptable levels of variance.

Application of Negative Curvature Hollow-Core Fiber in an Optical Fiber Sensor Setup for Multiphoton Spectroscopy

PubMed Central

Stawska, Hanna Izabela; Mazur, Leszek Mateusz; Kosolapov, Alexey; Kolyadin, Anton; Bereś-Pawlik, Elżbieta

2017-01-01

In this paper, an application of negative curvature hollow core fiber (NCHCF) in an all-fiber, multiphoton fluorescence sensor setup is presented. The dispersion parameter (D) of this fiber does not exceed the value of 5 ps/nm × km across the optical spectrum of (680–750) nm, making it well suited for the purpose of multiphoton excitation of biological fluorophores. Employing 1.5 m of this fiber in a simple, all-fiber sensor setup allows us to perform multiphoton experiments without any dispersion compensation methods. Multiphoton excitation of nicotinamide adenine dinucleotide (NADH) and flavin adenine dinucleotide (FAD) with this fiber shows a 6- and 9-fold increase, respectively, in the total fluorescence signal collected when compared with the commercial solution in the form of a hollow-core photonic band gap fiber (HCPBF). To the author’s best knowledge, this is the first time an NCHCF was used in an optical-fiber sensor setup for multiphoton fluorescence experiments. PMID:28984838

Application of Negative Curvature Hollow-Core Fiber in an Optical Fiber Sensor Setup for Multiphoton Spectroscopy.

PubMed

Popenda, Maciej Andrzej; Stawska, Hanna Izabela; Mazur, Leszek Mateusz; Jakubowski, Konrad; Kosolapov, Alexey; Kolyadin, Anton; Bereś-Pawlik, Elżbieta

2017-10-06

In this paper, an application of negative curvature hollow core fiber (NCHCF) in an all-fiber, multiphoton fluorescence sensor setup is presented. The dispersion parameter (D) of this fiber does not exceed the value of 5 ps/nm × km across the optical spectrum of (680-750) nm, making it well suited for the purpose of multiphoton excitation of biological fluorophores. Employing 1.5 m of this fiber in a simple, all-fiber sensor setup allows us to perform multiphoton experiments without any dispersion compensation methods. Multiphoton excitation of nicotinamide adenine dinucleotide (NADH) and flavin adenine dinucleotide (FAD) with this fiber shows a 6- and 9-fold increase, respectively, in the total fluorescence signal collected when compared with the commercial solution in the form of a hollow-core photonic band gap fiber (HCPBF). To the author's best knowledge, this is the first time an NCHCF was used in an optical-fiber sensor setup for multiphoton fluorescence experiments.

Relative validity and reproducibility of a food frequency questionnaire to assess dietary fiber intake in Danish adults.

PubMed

Vuholm, Stine; Lorenzen, Janne K; Kristensen, Mette

2014-01-01

Differences in habitual dietary fiber intake may modify effects of dietary fiber interventions, thus measurement of habitual dietary fiber intake is relevant to apply in intervention studies on fiber-rich foods, and food frequency questionnaire (FFQ) is a commonly used method. Rye bread is the major contributor of dietary fiber in the Danish population, and a nation-specific FFQ is therefore needed. The aim of this study was to assess the relative validity and reproducibility of a self-administered quantitative FFQ designed to assess total dietary fiber intake among Danish adults. In order to assess the relative validity of the FFQ, a total of 125 participants completed both a 7-day weighed dietary recording (DR) and an FFQ consisting of 60 questions. To evaluate the reproducibility of the FFQ, a sub-group of 12 participants subsequently completed an FFQ approximately 6 months later. Estimates of mean dietary fiber intake were 24.9±9.8 and 28.1±9.4 g/day when applying the FFQ and DR, respectively, where FFQ estimates were ~12% lower (p<0.001). Pearson's correlation coefficient between the estimated dietary fiber intake of the two methods was r=0.63 (p<0.001), and 62% of the participants were grouped into the same tertile of intake according to the two methods. The estimates of mean dietary intake of first and second FFQ were very similar (22.2±4.0 and 23.3±4.1 g/day, respectively, p=0.42) and showed a correlation of r=0.95 (95% CI 0.83-0.99). The developed FFQ showed moderate underestimation of dietary fiber intake (g/day), adequate ranking of subjects according to their dietary fiber intake, and good reproducibility. The FFQ is therefore believed to be a valuable tool for epidemiology and screening in human interventions, where intake of dietary fibers is of specific interest.

Distribution and prevalence of airborne microorganisms in three commercial poultry processing plants.

PubMed

Whyte, P; Collins, J D; McGill, K; Monahan, C; O'Mahony, H

2001-03-01

Airborne microbial contaminants and indicator organisms were monitored within three poultry processing plants (plants A, B, and C). In total, 15 cubic feet (c.f.) of air was sampled per location during 15 visits to each plant and quantitatively analyzed for total mesophilic and psychrophilic aerobic counts, thermophilic campylobacters, Escherichia coli, and Enterobacteriaceae. The prevalence of Salmonella spp. in air samples was also evaluated. Significant reductions in total aerobic counts were observed between defeathering and evisceration areas of the three plants (P < 0.05). Mesophilic plate counts were highest in the defeathering areas of all plants compared to equivalent psychrophilic plate counts. Enterobacteriaceae counts were highest in the defeathering areas of all three plants with counts of log10 1.63, 1.53, and 1.18 CFU/15 c.f. recovered in plants A, B, and C, respectively. E. coli enumerated from air samples in the defeathering areas exhibited a similar trend to those obtained for Enterobacteriaceae with log10 1.67, 1.58, and 1.18 CFU for plants A, B, and C, respectively. Thermophilic campylobacters were most frequently isolated from samples in the defeathering areas followed by the evisceration areas. The highest mean counts of the organism were observed in plant A at 21 CFU/15 c.f. sample with plants B and C at 9 and 8 CFU/sample, respectively. With the exception of low levels of Enterobacteriaceae recovered from samples in the on-line air chill in plant A, E. coli, Enterobacteriaceae, or Campylobacter spp. were not isolated from samples in postevisceration sites in any of the plants examined. Salmonella spp. were not recovered from any samples during the course of the investigation.

Structure and properties of silk from the African wild silkmoth Gonometa postica reared indoors

PubMed Central

Teshome, Addis; Raina, S. K.; Vollrath, Fritz

2014-01-01

Abstract African wild silkmoth, Gonometa postica Walker (Lepidoptera: Lasiocampidae), were reared indoors in order to examine the influence of rearing conditions on the structure and properties of silk cocoon shells and degummed fibers by using a scanning electron microscope, an Instron tensile tester, and a thermogravimetric analyzer. The cocoons reared indoors showed inferior quality in weight, length, width, and cocoon shell ratio compared to cocoons reared outdoors. There were no differences in cocoon shell and fiber surfaces and cross sectional structures. Cocoon shells were covered with calcium oxalate crystals with few visible fibers on their surface. Degummed fibers were smooth with minimum unfractured surfaces and globular to triangular cross sections. Indoor-reared cocoon shells had a significantly higher breaking strain, while the breaking stress was higher for cocoons reared outdoors. Fibers from indoor cocoons had a significantly higher breaking stress while outdoor fibers had higher breaking strain. Thermogravimetric analysis curves showed two main thermal reactions revealing the dehydration of water molecules and ir-reversible decomposition of the crystallites in both cocoons and fibers reared indoors and outdoors. Cocoon shells underwent additional peaks of decomposition with increased temperature. The total weight loss was higher for cocoon shells and degummed fibers from indoors. Rearing conditions (temperature and relative humidity), feeding method used, changes in total life span, days to molting, and spinning might have influenced the variation in the properties observed.The ecological and commercial significances of indoor rearing of G. postica are discussed. PMID:25373183

Analysis of an all optical de-multiplexer architecture utilizing bevel design for spatially multiplexed optical fiber communication systems

NASA Astrophysics Data System (ADS)

Murshid, Syed H.; Finch, Michael F.; Lovell, Gregory L.

2014-09-01

Spatial domain multiplexing (SDM) is a system that allows multiple channels of light to traverse a single fiber, utilizing separate spatial regions inside the carrier fiber, thereby applying a new degree of photon freedom for optical fiber communications. These channels follow a helical pattern, the screen projection of which is viewable as concentric rings at the output end of the system. The MIMO nature of the SDM system implies that a typical pin-diode or APD will be unable to distinguish between these channels, as the diode will interpret the combination of the SDM signals from all channels as a single signal. As such, spatial de-multiplexing methods must be introduced to properly detect the SDM based MIMO signals. One such method utilizes a fiber consisting of multiple, concentric, hollow core fibers to route each channel independently and thereby de-mux the signals into separate fibers or detectors. These de-mux fibers consist of hollow core cylindrical structures with beveled edges on one side that gradually taper to route the circular, ring type, output energy patterns into a spot with the highest possible efficiency. This paper analyzes the beveled edge by varying its length and analyzing the total output power for each predetermined length allowing us to simulate ideal bevel length to minimize both system losses as well as total de-mux footprint. OptiBPM simulation engine is employed for these analyses.

Effect of fiber blends, total solids, heat treatment, whey protein concentrate and stage of sugar incorporation on dietary fiber-fortified Kheer.

PubMed

Arora, Simran Kaur; Patel, A A

2017-10-01

Owing to the proven beneficial role of dietary fiber (DF) on human health, feasibility of incorporating commercially available soluble and insoluble DF preparations into rice-milk-pudding ( kheer, a popular Indian delicacy) was studied through process modification. The novel approach of preparing reduced fat DF-fortified- kheer (DFFK) by developing liquid/cream phase and particulate/rice phase separately, and subsequently blending the two was developed. The major processing variables studied were total solids (TS) in the liquid phase, type of fiber blend, flavor-simulation through heat treatment or added whey protein, and the presence of sugar in water for pre-cooking of rice. Reduced fat DFFK made from three different pre-standardized fiber blends was quite acceptable to the sensory panel (overall rating 7.5). With increasing TS in milk up to 16.5%, sensory acceptability of DFFK increased. There was a small but perceivable improvement in the flavour of DFFK when precooking of rice was carried out in sweetened water. Reduced fat DFFK from different fiber blends was found to be reasonably close to conventional kheer . DFFK prepared from Blend-I provided 3.31 g dietary fiber/100 kcal (suitable for the claim "High-in-Fiber") with 38.71% Reduced-Fat. With the developed process of fortification of kheer with DF, it is possible to reduce fat (and thus calories) to cater to the needs of consumers seeking good health.

Effects of cereal fiber on bowel function: A systematic review of intervention trials

PubMed Central

de Vries, Jan; Miller, Paige E; Verbeke, Kristin

2015-01-01

AIM: To comprehensively review and quantitatively summarize results from intervention studies that examined the effects of intact cereal dietary fiber on parameters of bowel function. METHODS: A systematic literature search was conducted using PubMed and EMBASE. Supplementary literature searches included screening reference lists from relevant studies and reviews. Eligible outcomes were stool wet and dry weight, percentage water in stools, stool frequency and consistency, and total transit time. Weighted regression analyses generated mean change (± SD) in these measures per g/d of dietary fiber. RESULTS: Sixty-five intervention studies among generally healthy populations were identified. A quantitative examination of the effects of non-wheat sources of intact cereal dietary fibers was not possible due to an insufficient number of studies. Weighted regression analyses demonstrated that each extra g/d of wheat fiber increased total stool weight by 3.7 ± 0.09 g/d (P < 0.0001; 95%CI: 3.50-3.84), dry stool weight by 0.75 ± 0.03 g/d (P < 0.0001; 95%CI: 0.69-0.82), and stool frequency by 0.004 ± 0.002 times/d (P = 0.0346; 95%CI: 0.0003-0.0078). Transit time decreased by 0.78 ± 0.13 h per additional g/d (P < 0.0001; 95%CI: 0.53-1.04) of wheat fiber among those with an initial transit time greater than 48 h. CONCLUSION: Wheat dietary fiber, and predominately wheat bran dietary fiber, improves measures of bowel function. PMID:26269686

Considerations for monitoring raptor population trends based on counts of migrants

USGS Publications Warehouse

Titus, K.; Fuller, M.R.; Ruos, J.L.; Meyburg, B-U.; Chancellor, R.D.

1989-01-01

Various problems were identified with standardized hawk count data as annually collected at six sites. Some of the hawk lookouts increased their hours of observation from 1979-1985, thereby confounding the total counts. Data recording and missing data hamper coding of data and their use with modern analytical techniques. Coefficients of variation among years in counts averaged about 40%. The advantages and disadvantages of various analytical techniques are discussed including regression, non-parametric rank correlation trend analysis, and moving averages.

The Right Start State Trends: Conditions of Babies and Their Families across the Nation (1990-1998). Child Trends/KIDS COUNT Special Report.

ERIC Educational Resources Information Center

Croan, Tara; Hatcher, Juliet; Jager, Justin; Long, Melissa; O'Hare, William; Wertheimer, Richard

This Kids Count special report examines how children born in each state fared on selected measures of a "right start." This statistical portrait is based on trends in eight indicators of well-being: (1) percent of total births to teens; (2) percent of repeat teen births; (3) percent of total births to unmarried women; (4) percent of…

Spatiotemporal Dynamics of Total Viable Vibrio spp. in a NW Mediterranean Coastal Area.

PubMed

Girard, Léa; Peuchet, Sébastien; Servais, Pierre; Henry, Annabelle; Charni-Ben-Tabassi, Nadine; Baudart, Julia

2017-09-27

A cellular approach combining Direct Viable Counting and Fluorescent In Situ Hybridization using a one-step multiple-probe technique and Solid Phase Cytometry (DVC-FISH-SPC) was developed to monitor total viable vibrios and cover the detection of a large diversity of vibrios. FISH combined three probes in the same assay and targeted sequences located at different positions on the 16S rRNA of Vibrio and Aliivibrio members. We performed a 10-month in situ study to investigate the weekly dynamics of viable vibrios relative to culturable counts at two northwestern Mediterranean coastal sites, and identified the key physicochemical factors for their occurrence in water using a multivariate analysis. Total viable and culturable cell counts showed the same temporal pattern during the warmer season, whereas the ratios between both methods were inverted during the colder seasons (<15°C), indicating that some of the vibrio community had entered into a viable but non-culturable (VBNC) state. We confirmed that Seawater Surface Temperature explained 51-62% of the total variance in culturable counts, and also showed that the occurrence of viable vibrios is controlled by two variables, pheopigment (15%) and phosphate (12%) concentrations, suggesting that other unidentified factors play a role in maintaining viability.

A Statistical Treatment of Bioassay Pour Fractions

NASA Technical Reports Server (NTRS)

Barengoltz, Jack; Hughes, David W.

2014-01-01

The binomial probability distribution is used to treat the statistics of a microbiological sample that is split into two parts, with only one part evaluated for spore count. One wishes to estimate the total number of spores in the sample based on the counts obtained from the part that is evaluated (pour fraction). Formally, the binomial distribution is recharacterized as a function of the observed counts (successes), with the total number (trials) an unknown. The pour fraction is the probability of success per spore (trial). This distribution must be renormalized in terms of the total number. Finally, the new renormalized distribution is integrated and mathematically inverted to yield the maximum estimate of the total number as a function of a desired level of confidence ( P(

[Asthma and cyclic neutropenia].

PubMed

Salazar Cabrera, A N; Berrón Pérez, R; Ortega Martell, J A; Onuma Takane, E

1996-01-01

We report a male with history of recurrent infections (recurrent oral aphtous disease [ROAD], middle ear infections and pharyngo amigdalitis) every 3 weeks since he was 7 months old. At the age of 3 years cyclic neutropenia was diagnosed with cyclic fall in the total neutrophil count in blood smear every 21 days and prophylactic antimicrobial therapy was indicated. Episodic events every 3 weeks of acute asthma and allergic rhinitis were detected at the age of 6 years old and specific immunotherapy to Bermuda grass was given during 3 years with markedly improvement in his allergic condition but not in the ROAD. He came back until the age of 16 with episodic acute asthma and ROAD. The total neutrophil count failed to 0 every 21 days and surprisingly the total eosinophil count increased up to 2,000 at the same time, with elevation of serum IgE (412 Ul/mL). Specific immunotherapy to D.pt. and Aller.a. and therapy with timomodulin was indicated. After 3 months we observed clinical improvement in the asthmatic condition and the ROAD disappeared, but the total neutrophil count did not improve. We present this case as a rare association between 2 diseases with probably no etiological relationship but may be physiopatological that could help to understand more the pathogenesis of asthma.

20 CFR 418.3325 - What earned income do we not count?

Code of Federal Regulations, 2010 CFR

2010-04-01

... percentage of your total earned income per month. The amount we exclude will be equal to the average... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false What earned income do we not count? 418.3325... Subsidies Income § 418.3325 What earned income do we not count? (a) While we must know the source and amount...

20 CFR 418.3325 - What earned income do we not count?

Code of Federal Regulations, 2011 CFR

2011-04-01

... percentage of your total earned income per month. The amount we exclude will be equal to the average... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false What earned income do we not count? 418.3325... Subsidies Income § 418.3325 What earned income do we not count? (a) While we must know the source and amount...

Total pollen counts do not influence active surface measurements

NASA Astrophysics Data System (ADS)

Moshammer, Hanns; Schinko, Herwig; Neuberger, Manfred

We investigated the temporal association of various aerosol parameters with pollen counts in the pollen season (April 2001) in Linz, Austria. We were especially interested in the relationship between active surface (or Fuchs' surface) because we had shown previously (Atmos. Environ. 37 (2003) 1737-1744) that this parameter during the same observation period was a better predictor for acute respiratory symptoms in school children (like wheezing, shortness of breath, and cough) and reduced lung function on the same day than particle mass (PM 10). While active surface is most sensitive for fine particles with a diameter of less than 100 nm it has no strict upper cut-off regarding particle size and so could eventually be influenced also by larger particles if their numbers were high. All particle mass parameters tested (TSP, PM 10, PM 1) were weakly ( r approximately 0.2) though significantly correlated with pollen counts but neither was active surface nor total particle counts (CPC). The weak association of particle mass and pollen counts was due mainly to similar diurnal variations and a linear trend over time. Only the mass of the coarse fraction (TSP minus PM 10) remained associated with pollen counts significantly after controlling for these general temporal patterns.

Use of attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopy in direct, non-destructive, and rapid assessment of developmental cotton fibers grown in planta and in culture

USDA-ARS?s Scientific Manuscript database

Cotton fibers are routinely harvested from cotton plants (in planta), and their end-use qualities depend on their development stages. Cotton fibers are also cultured at controlled laboratory environments, so that cotton researchers can investigate many aspects of experimental protocols in cotton bre...

Fabrication of dual porosity electrode structure

DOEpatents

Smith, James L.; Kucera, Eugenia H.

1991-01-01

A substantially entirely fibrous ceramic which may have dual porosity of both micro and macro pores. Total porosity may be 60-75% by volume. A method of spraying a slurry perpendicularly to an ambient stream of air is disclosed along with a method of removing binders without altering the fiber morphology. Adding fine ceramic particulates to the green ceramic fibers enhances the sintering characteristics of the fibers.

Sperm freezing to address the risk of azoospermia on the day of ICSI.

PubMed

Montagut, M; Gatimel, N; Bourdet-Loubère, S; Daudin, M; Bujan, L; Mieusset, R; Isus, F; Parinaud, J; Leandri, R

2015-11-01

In which cases is freezing of ejaculated sperm indicated before ICSI? Sperm freezing should be performed only when out of two analyses at least one total sperm count in the ejaculate is lower than 10(6). Due to variations in individual sperm parameters, in cases of severe oligozoospermia there is a risk of absence of spermatozoa on the day of ICSI, leading to cancellation of the attempt. Sperm freezing can avoid this problem but little is known of the parameters governing the decision to freeze sperm or not. This retrospective study included 247 men who underwent sperm cryopreservation to prevent the risk of azoospermia on the day of ICSI, from 2000 to 2012. Receiver operating characteristic curve analysis was used to define the threshold value. The lowest total sperm count per ejaculate was studied as a predictive factor for the use of frozen sperm in a total of 593 ICSI attempts. Moreover, 2003 patients who had at least 4 semen analyses for andrological diagnosis have been studied to evaluate the reproducibility of sperm count. To evaluate the psychological impact of sperm freezing, a questionnaire was administered to 84 men who attended for sperm cryopreservation between June and December 2014. The cost of sperm freezing was analysed according to the French prices. When at least one total sperm count was <10(5) the risk of azoospermia in at least one ICSI attempt was 52% (34/66) versus 3% (5/181) when all counts were ≥10(5) (P < 0.0001). However, the study of the reproducibility of pre-ICSI semen analyses has shown wide variations among ejaculates, and therefore sperm freezing is recommended when one analysis from at least two, showed a sperm count <10(6). Such a policy could allow a saving of about €70 000 by avoiding unnecessary sperm freezings. The psychological impact of sperm freezing was good since >70% of men had positive feelings about this technique. This was a fairly short-term study and preservation of future fertility was not assessed. It appeared impossible to find a threshold that would predict the risk of azoospermia with 100% accuracy. Therefore there is still a risk of absence of spermatozoa on the day of ICSI despite a good negative predictive value when no total sperm count was lower than 10(5). These data suggest that sperm freezing should be proposed when total sperm count is lower than 10(6) to avoid cancellation of the ICSI attempt due to azoospermia. © The Author 2015. Published by Oxford University Press on behalf of the European Society of Human Reproduction and Embryology. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Effect of dietary fiber on microbial activity and microbial gas production in various regions of the gastrointestinal tract of pigs.

PubMed Central

Jensen, B B; Jørgensen, H

1994-01-01

The microbial activity, composition of the gas phase, and gas production rates in the gastrointestinal tract of pigs fed either a low- or a high-fiber diet were investigated. Dense populations of culturable anaerobic bacteria, high ATP concentrations, and high adenylate energy charges were found for the last third of the small intestine, indicating that substantial microbial activity takes place in that portion of the gut. The highest microbial activity (highest bacterium counts, highest ATP concentration, high adenylate energy charge, and low pH) was found in the cecum and proximal colon. Greater microbial activity was found in the stomach and all segments of the hindgut in the pigs fed the high-fiber diet than in the pigs fed the low-fiber diet. Considerable amounts of O2 were found in the stomach (around 5%), while the content of O2 in gas samples taken from all other parts of the gastrointestinal tract was < 1%. The highest concentrations and highest production rates for H2 were found in the last third of the small intestine. No methane could be detected in the stomach or the small intestine. The rate of production and concentration of methane in the cecum and the proximal colon were low, followed by a steady increase in the successive segments of the hindgut. A very good correlation between in vivo and in vitro measurements of methane production was found. The amount of CH4 produced by pigs fed the low-fiber diet was 1.4 liters/day per animal. Substantially larger amounts of CH4 were produced by pigs fed the high-fiber diet (12.5 liters/day)(ABSTRACT TRUNCATED AT 250 WORDS) PMID:8031085

Functional characteristics of the rat jaw muscles: daily muscle activity and fiber type composition.

PubMed

Kawai, Nobuhiko; Sano, Ryota; Korfage, Joannes A M; Nakamura, Saika; Tanaka, Eiji; van Wessel, Tim; Langenbach, Geerling E J; Tanne, Kazuo

2009-12-01

Skeletal muscles have a heterogeneous fiber type composition, which reflects their functional demand. The daily muscle use and the percentage of slow-type fibers have been shown to be positively correlated in skeletal muscles of larger animals but for smaller animals there is no information. The examination of this relationship in adult rats was the purpose of this study. We hypothesized a positive relationship between the percentage of fatigue-resistant fibers in each muscle and its total duration of use per day. Fourteen Wistar strain male rats (410-450 g) were used. A radio-telemetric device was implanted to record muscle activity continuously from the superficial masseter, deep masseter, anterior belly of digastric and anterior temporalis muscles. The degree of daily muscle use was quantified by the total duration of muscle activity per day (duty time) exceeding specified levels of the peak activity (2, 5, 20 and 50%). The fiber type composition of the muscles was examined by the myosin heavy chain content of the fibers by means of immunohistochemical staining. At lower activity levels (exceeding 2 and 5% of the peak activity), the duty time of the anterior belly of digastric muscle was significantly (P < 0.01) longer than those of the other muscles. The anterior belly of digastric muscle also contained the highest percentage of slow-type fibers (type I fiber and hybrid fiber co-expressing myosin heavy chain I + IIA) (ca. 11%; P < 0.05). By regression analysis for all four muscles, an inter-muscular comparison showed a positive relationship between the duty time (exceeding 50% of the peak activity) and the percentage of type IIX fibers (P < 0.05), which demonstrate intermediate physiological properties relative to type IIA and IIB fibers. For the jaw muscles of adult male rats, the variations of fiber type composition and muscle use suggest that the muscle containing the largest amounts of slow-type fibers (the anterior belly of digastric muscle) is mainly involved in low-amplitude activities and that the amount of type IIX fibers is positively related to the generation of large muscle forces, validating our hypothesis.

Strength Development of High-Strength Ductile Concrete Incorporating Metakaolin and PVA Fibers

PubMed Central

Nuruddin, Muhammad Fadhil; Shafiq, Nasir

2014-01-01

The mechanical properties of high-strength ductile concrete (HSDC) have been investigated using Metakaolin (MK) as the cement replacing material and PVA fibers. Total twenty-seven (27) mixes of concrete have been examined with varying content of MK and PVA fibers. It has been found that the coarser type PVA fibers provide strengths competitive to control or higher than control. Concrete with coarser type PVA fibers has also refined microstructure, but the microstructure has been undergone with the increase in aspect ratio of fibers. The microstructure of concrete with MK has also more refined and packing of material is much better with MK. PVA fibers not only give higher stiffness but also showed the deflection hardening response. Toughness Index of HSDC reflects the improvement in flexural toughness over the plain concrete and the maximum toughness indices have been observed with 10% MK and 2% volume fraction of PVA fibers. PMID:24707202

Strength development of high-strength ductile concrete incorporating Metakaolin and PVA fibers.

PubMed

Nuruddin, Muhammad Fadhil; Khan, Sadaqat Ullah; Shafiq, Nasir; Ayub, Tehmina

2014-01-01

The mechanical properties of high-strength ductile concrete (HSDC) have been investigated using Metakaolin (MK) as the cement replacing material and PVA fibers. Total twenty-seven (27) mixes of concrete have been examined with varying content of MK and PVA fibers. It has been found that the coarser type PVA fibers provide strengths competitive to control or higher than control. Concrete with coarser type PVA fibers has also refined microstructure, but the microstructure has been undergone with the increase in aspect ratio of fibers. The microstructure of concrete with MK has also more refined and packing of material is much better with MK. PVA fibers not only give higher stiffness but also showed the deflection hardening response. Toughness Index of HSDC reflects the improvement in flexural toughness over the plain concrete and the maximum toughness indices have been observed with 10% MK and 2% volume fraction of PVA fibers.

Lipid Lowering with Soluble Dietary Fiber.

PubMed

Surampudi, Prasanth; Enkhmaa, Byambaa; Anuurad, Erdembileg; Berglund, Lars

2016-12-01

Consumption of dietary soluble fibers has been associated with health benefits such as reduced lipid levels, lower blood pressure, improved blood glucose control, weight loss, improved immune function, and reduced inflammation. Many of these health benefits relate to a reduced risk of developing cardiovascular disease. In this paper, we have reviewed recent studies on the hypocholesterolemic effects of dietary soluble fibers as well as fiber-rich foods. Findings include the following: (a) consumption of water-soluble, viscous-forming fibers can reduce total and low-density lipoprotein cholesterol levels by about 5-10 %; (b) minimal changes of high-density lipoprotein cholesterol or triglyceride levels were observed; (c) cholesterol-lowering properties of soluble fibers depend on their physical and chemical properties; and (d) medium to high molecular weight fibers are more effective in reducing lipid levels. Hypocholesterolemic benefits were also observed with some fiber-rich foods, such as whole oats, whole barley, legumes, peas, beans, flax seeds, apples, and citrus foods.

Banana (Musa sp. var. elakki bale) flower and pseudostem: dietary fiber and associated antioxidant capacity.

PubMed

Bhaskar, Jamuna J; S, Mahadevamma; Chilkunda, Nandini D; Salimath, Paramahans V

2012-01-11

Banana flower (BF) and pseudostem (PS) are byproducts of banana cultivation and are known to have health beneficial effects. The main objective of this study was to evaluate the dietary fiber composition and antioxidant effect of BF and PS. In the present study, BF and PS were found to be rich in dietary fiber (65.6 ± 1.32 and 28.8 ± 0.98%, respectively). Dietary fiber fractions were extracted and characterized in terms of sugar profile, and antioxidant activities were determined. BF and PS fractions were rich in sugars and showed wide diversity with respect to the nature of the sugars. Hemicellulose A fraction of BF showed high amounts of total polyphenols and total antioxidants, which were 121.8 ± 1.9 and 39.03 ± 0.118 μg/mg extract, respectively. HPLC analysis showed the presence of phenolic acids in hemicellulose A and B fractions of BF. These results indicate that BF and PS are rich sources of dietary fiber associated with polyphenols, which could promote health beneficial effects.

A High Fiber Cookie Made with Resistant Starch Type 4 Reduces Post-Prandial Glucose and Insulin Responses in Healthy Adults.

PubMed

Stewart, Maria L; Zimmer, J Paul

2017-03-05

Distarch phosphate is a resistant starch type 4 (RS4) containing phosphodiester cross-links within and between starch molecules. This study examined the glycemic effects of VERSAFIBE 1490™ resistant starch, a distarch phosphate derived from potato, containing 90% total dietary fiber (TDF, AOAC 991.43 method). In this double-blind, randomized, placebo-controlled, cross-over study, 28 healthy adults consumed a cookie containing 24 g fiber from distarch phosphate (fiber cookie) or a control cookie containing 0.5 g fiber that was matched for fat, protein, and total carbohydrate content. Intravenous blood glucose, intravenous blood insulin, and capillary glucose were measured for two hours after cookie consumption. The fiber cookie reduced the post-prandial blood glucose incremental area under the curve from 0 to 120 minutes (iAUC 0-120min ) by 44% ( p = 0.004) and reduced the maximum glucose concentration (C max0-120min ) by 8% ( p = 0.001) versus the control cookie. Consumption of the fiber cookie resulted in a significant 46% reduction of the post-prandial serum insulin iAUC 0-120min ( p < 0.001) and a 23% reduction in Cmax 0-120min ( p = 0.007) versus the control cookie. This study shows that distarch phosphate RS4 can be incorporated into a cookie and significantly reduce post-prandial glucose and insulin responses in healthy adults.