Roads at risk - traffic detours from debris flows in southern Norway

NASA Astrophysics Data System (ADS)

Meyer, N. K.; Schwanghart, W.; Korup, O.; Nadim, F.

2014-10-01

Globalization and interregional exchange of people, goods, and services has boosted the importance of and reliance on all kinds of transport networks. The linear structure of road networks is especially sensitive to natural hazards. In southern Norway, steep topography and extreme weather events promote frequent traffic disruption caused by debris flows. Topographic susceptibility and trigger frequency maps serve as input into a hazard appraisal at the scale of first-order catchments to quantify the impact of debris flows on the road network in terms of a failure likelihood of each link connecting two network vertices, e.g., road junctions. We compute total additional traffic loads as a function of traffic volume and excess distance, i.e. the extra length of an alternative path connecting two previously disrupted network vertices using a shortest-path algorithm. Our risk metric of link failure is the total additional annual traffic load expressed as vehicle kilometers because of debris-flow related road closures. We present two scenarios demonstrating the impact of debris flows on the road network, and quantify the associated path failure likelihood between major cities in southern Norway. The scenarios indicate that major routes crossing the central and northwestern part of the study area are associated with high link failure risk. Yet options for detours on major routes are manifold, and incur only little additional costs provided that drivers are sufficiently well informed about road closures. Our risk estimates may be of importance to road network managers and transport companies relying of speedy delivery of services and goods.

Roads at risk: traffic detours from debris flows in southern Norway

NASA Astrophysics Data System (ADS)

Meyer, N. K.; Schwanghart, W.; Korup, O.; Nadim, F.

2015-05-01

Globalisation and interregional exchange of people, goods, and services has boosted the importance of and reliance on all kinds of transport networks. The linear structure of road networks is especially sensitive to natural hazards. In southern Norway, steep topography and extreme weather events promote frequent traffic disruption caused by debris flows. Topographic susceptibility and trigger frequency maps serve as input into a hazard appraisal at the scale of first-order catchments to quantify the impact of debris flows on the road network in terms of a failure likelihood of each link connecting two network vertices, e.g. road junctions. We compute total additional traffic loads as a function of traffic volume and excess distance, i.e. the extra length of an alternative path connecting two previously disrupted network vertices using a shortest-path algorithm. Our risk metric of link failure is the total additional annual traffic load, expressed as vehicle kilometres, because of debris-flow-related road closures. We present two scenarios demonstrating the impact of debris flows on the road network and quantify the associated path-failure likelihood between major cities in southern Norway. The scenarios indicate that major routes crossing the central and north-western part of the study area are associated with high link-failure risk. Yet options for detours on major routes are manifold and incur only little additional costs provided that drivers are sufficiently well informed about road closures. Our risk estimates may be of importance to road network managers and transport companies relying on speedy delivery of services and goods.

Effects of Road Density and Road-Salt Application Practices on Sodium and Chloride Loads to the Scituate Reservoir, Rhode Island

NASA Astrophysics Data System (ADS)

Waldron, M. C.; Nimiroski, M.

2001-05-01

The Scituate Reservoir drainage basin is the drinking-water source area for two thirds of the population of Rhode Island. The effects of road density and road-salt-application practices on sodium and chloride concentrations in streams in the drainage basin were examined using concentration data collected at intervals of one to six months from January 1982 through June 2000 at 32 stream sites distributed throughout the basin. Median concentrations of sodium and chloride for individual streams during the period of data collection were related to 1995 road densities (road miles per square mile of subbasin) for roads maintained by the Rhode Island Department of Transportation (State-maintained roads) and for roads maintained by the four municipalities in the drainage basin (locally maintained roads). Nearly 60 percent of the variation in median stream sodium and chloride concentrations was accounted for by the variation in density of State-maintained roads (R2= 0.595, p < 0.0001). In contrast, no correlations could be identified between median concentrations of sodium and chloride in streams and the densities of locally maintained roads in the subbasins (R2 = 0.001, p = 0.8771). Also, there was no difference in the relations between median stream sodium concentrations and subbasin road densities for data collected before and after a 1990 State-mandated reduction in the rate of application of sodium during winter deicing of State-maintained roads. Analysis of data on sources of sodium and chloride in the Scituate Reservoir drainage basin during water year 2000 (October 1999 through September 2000) indicates that, while the lengths and densities of locally maintained roads were greater than those of State-maintained roads in most subbasins, the total amount of sodium applied during water year 2000 was nearly three times greater for State-maintained roads than for locally maintained roads. This would be expected, given that State-maintained roads carry more traffic at higher speeds than do locally maintained roads. In addition, the State-maintained roads tend to have more efficient drainage systems that quickly transport runoff directly to the streams. The lack of effect of the reduced sodium application rate on the relation between median stream sodium concentration and density of State-maintained roads may be due to inaccurate monitoring of application rates or to mobilization of sodium previously applied and stored in drainage basin soils. Thus, the amounts of sodium and chloride transported by tributary streams to the Scituate Reservoir depend more on the type of roads and other conditions in the tributary subbasins than on the actual length or density of the roads.

Erosion and sediment delivery following removal of forest roads

USGS Publications Warehouse

Madej, Mary Ann

2001-01-01

Erosion control treatments were applied to abandoned logging roads in California, with the goal of reducing road-related sediment input to streams and restoring natural hydrologic patterns on the landscape. Treatment of stream crossings involved excavating culverts and associated road fill and reshaping streambanks. A variety of techniques were applied to road benches, which included decompacting the road surface, placing unstable road fill in more stable locations, and re-establishing natural surface drainage patterns. Following treatment and a 12-year recurrence-interval storm, some road reaches and excavated stream crossings showed evidence of mass movement failures, gullying, bank erosion and channel incision. Post-treatment erosion from excavated stream crossings was related to two variables: a surrogate for stream power (drainage area × channel gradient) and the volume of fill excavated from the channel. Post-treatment erosion on road reaches was related to four explanatory variables: method of treatment, hillslope position (upper, mid-slope or lower), date of treatment, and an interaction term (hillslope position × method of treatment). Sediment delivery from treated roads in upper, middle and lower hillslope positions was 10, 135 and 550 m3 of sediment per kilometre of treated roads, respectively. In contrast, inventories of almost 500 km of forest roads in adjacent catchments indicate that untreated roads produced 1500 to 4700 m3 of sediment per kilometre of road length. Erosion from 300 km of treated roads contributed less than 2 per cent of the total sediment load of Redwood Creek during the period 1978 to 1998. Although road removal treatments do not completely eliminate erosion associated with forest roads, they do substantially reduce sediment yields from abandoned logging roads.

A case study of an erosion control practice: the broad-based dip

Treesearch

Kevin Bold; Pamela Edwards; Karl Williard

2007-01-01

In 2006, 19 gravel haul roads with broad-based dips within the Monongahela National Forest were examined to determine if those dips adhered to Forest specifications for cut depth and dip outslope. Data on the azimuth, contributing road lengths, slopes of the contributing lengths, landscape position of the dip, and soil texture of the road bed materials also were...

The influence of landscape features on road development in a loess region, China.

PubMed

Bi, Xiaoli; Wang, Hui; Zhou, Rui

2011-10-01

Many ecologists focus on the effects of roads on landscapes, yet few consider how landscapes affect road systems. In this study, therefore, we quantitatively evaluated how land cover, topography, and building density affected the length density, node density, spatial pattern, and location of roads in Dongzhi Yuan, a typical loess region in China. Landscape factors and roads were mapped using images from SPOT satellite (Système Probatoire d'Observation de la Terre), initiated by the French space agency and a digital elevation model (DEM). Detrended canonical correspondence analysis (DCCA), a useful ordination technique to explain species-environment relations in community ecology, was applied to evaluate the ways in which landscapes may influence roads. The results showed that both farmland area and building density were positively correlated with road variables, whereas gully density and the coefficient of variation (CV of DEM) showed negative correlations. The CV of DEM, farmland area, grassland area, and building density explained variation in node density, length density, and the spatial pattern of roads, whereas gully density and building density explained variation in variables representing road location. In addition, node density, rather than length density, was the primary road variable affected by landscape variables. The results showed that the DCCA was effective in explaining road-landscape relations. Understanding these relations can provide information for landscape managers and transportation planners.

Tyre contact length on dry and wet road surfaces measured by three-axial accelerometer

NASA Astrophysics Data System (ADS)

Matilainen, Mika; Tuononen, Ari

2015-02-01

We determined the tyre contact length on dry and wet roads by measuring the accelerations of the inner liner with a three-axial accelerometer. The influence of the tyre pressure, driving velocity, and tread depth on the contact length was studied in both types of road surface conditions. On dry asphalt the contact length was almost constant, regardless of the driving velocity. On wet asphalt the presence of water could be detected even at low driving velocities (e.g. 20 km/h for a worn tyre) as the contact length began to decrease from that found in the dry asphalt situation. In addition to improving the performance of active safety systems and driver warning systems, the contact length information could be beneficial for classifying and studying the aquaplaning behaviour of tyres.

Energy-harvesting potential of automobile suspension

NASA Astrophysics Data System (ADS)

Múčka, Peter

2016-12-01

This study is aimed quantify dissipated power in a damper of automobile suspension to predict energy harvesting potential of a passenger car more accurately. Field measurements of power dissipation in a regenerative damper are still rare. The novelty is in using the broad database of real road profiles, a 9 degrees-of-freedom full-car model with real parameters, and a tyre-enveloping contact model. Results were presented as a function of road surface type, velocity and road roughness characterised by International Roughness Index. Results were calculated for 1600 test sections of a total length about 253.5 km. Root mean square of a dissipated power was calculated from 19 to 46 W for all four suspension dampers and velocity 60 km/h and from 24 to 58 W for velocity 90 km/h. Results were compared for a full-car model with a tyre-enveloping road contact, full-car and quarter-car models with a tyre-road point contact. Mean difference among three models in calculated power was a few per cent.

An Epidemiological Study of Road Traffic Accidents in Guilan Province, Northern Iran in 2012

PubMed Central

Mohtasham-Amiri, Zahra; Dastgiri, Saeed; Davoudi-kiakalyeh, Ali; Imani, Ali; Mollarahimi, Keyvan

2016-01-01

Objective: To determine the epidemiological characteristics of the road traffic injuries (RTIs) in Guilan province, northern Iran. Methods: This study was a cross-sectional study which included all of RTIs admitted to medical centers of Guilan province (northern Iran) during 2012. ICD-10 was used as diagnostic criteria. Demographic variables also injury circumstance and in hospital variables such as length of stay, time of admission, type of surgery, ICU admission, final outcome and mechanism of injury, anatomical part of injury according to Abbreviated Injury Scale (AIS) classification were derives from records by trained research team. Descriptive data is reported. The predictors of mortality were also determined. Results: The prevalence of road traffic injuries in Guilan province was 31 in 10,000 populations. Of total 7671 accidents, 5976 (77.9%) were men and 1695 (22.1%) were women. Mean age of these victims was 33.3 ± 17.289 years (32.64±16.939 for men, 35.62±18.312 for women). Most of them (32.5%) were 20-29 years old. Motorcycle-car accidents had the highest frequency followed by car-car crashes and car accidents involving pedestrians. Most of the patients (85.9%) were hospitalized and 280 injured died (3.7%). Upper extremities were the most sites of injuries. Male sex, length of hospital stay, multiple injuries and increased age were associated with road traffic accident associated mortality. Conclusion: RTIs cause enormous death and disability in this area and more road traffic preventive programs should be enforcement in these areas to reduce incidences RTI. PMID:27878129

Characterization and first flush analysis in road and roof runoff in Shenyang, China.

PubMed

Li, Chunlin; Liu, Miao; Hu, Yuanman; Gong, Jiping; Sun, Fengyun; Xu, Yanyan

2014-01-01

As urbanization increases, urban runoff is an increasingly important component of total urban non-point source pollution. In this study, the properties of urban runoff were examined in Shenyang, in northeastern China. Runoff samples from a tiled roof, a concrete roof and a main road were analyzed for key pollutants (total suspended solids (TSS), total nitrogen (TN), total phosphorus (TP), chemical oxygen demand (COD), Pb, Cd, Cr, Cu, Ni, and Zn). The event mean concentration, site mean concentration, M(V) curves (dimensionless cumulative curve of pollutant load with runoff volume), and mass first flush ratio (MFF30) were used to analyze the characteristics of pollutant discharge and first flush (FF) effect. For all events, the pollutant concentration peaks occurred in the first half-hour after the runoff appeared and preceded the flow peaks. TN is the main pollutant in roof runoff. TSS, TN, TP, Pb, and Cr are the main pollutants in road runoff in Shenyang. There was a significant correlation between TSS and other pollutants except TN in runoff, which illustrated that TSS was an important carrier of organic matter and heavy metals. TN had strong positive correlations with total rainfall (Pearson's r = 0.927), average rainfall (Pearson's r = 0.995), and maximum rainfall intensity (Pearson's r = 0.991). TP had a strong correlation with rainfall intensity (Pearson's r = 0.940). A significant positive correlation between COD and rainfall duration (Pearson's r = 0.902, significance level = 0.05) was found. The order of FF intensity in different surfaces was concrete roof > tile roof > road. Rainfall duration and the length of the antecedent dry period were positively correlated with the FF. TN tended to exhibit strong flush for some events. Heavy metals showed a substantially stronger FF than other pollutant.

[Characteristics of fugitive dust emission from paved road near construction activities].

PubMed

Tian, Gang; Fan, Shou-Bin; Li, Gang; Qin, Jian-Ping

2007-11-01

Because of the mud/dirt carryout from construction activities, the silt loading of paved road nearby is higher and the fugitive dust emission is stronger. By sampling and laboratory analysis of the road surface dust samples, we obtain the silt loading (mass of material equal to or less than 75 micromaters in physical diameter per unit area of travel surface) of paved roads near construction activities. The result show that silt loading of road near construction activities is higher than "normal road", and silt loading is negatively correlated with length from construction's door. According to AP-42 emission factor model of fugitive dust from roads, the emission factor of influenced road is 2 - 10 times bigger than "normal road", and the amount of fugitive dust emission influenced by one construction activity is "equivalent" to an additional road length of approximately 422 - 3 800 m with the baseline silt loading. Based on the spatial and temporal distribution of construction activities, in 2002 the amount of PM10 emission influenced by construction activities in Beijing city areas account of for 59% of fugitive dust from roads.

Urban street structure and traffic safety.

PubMed

Mohan, Dinesh; Bangdiwala, Shrikant I; Villaveces, Andres

2017-09-01

This paper reports the influence of road type and junction density on road traffic fatality rates in U.S. cities. The Fatality Analysis Reporting System (FARS) files were used to obtain fatality rates for all cities for the years 2005-2010. A stratified random sample of 16 U.S. cities was taken, and cities with high and low road traffic fatality rates were compared on their road layout details (TIGER maps were used). Statistical analysis was done to determine the effect of junction density and road type on road traffic fatality rates. The analysis of road network and road traffic crash fatality rates in these randomly selected U.S. cities shows that, (a) higher number of junctions per road length was significantly associated with a lower motor- vehicle crash and pedestrian mortality rates, and, (b) increased number of kilometers of roads of any kind was associated with higher fatality rates, but an additional kilometer of main arterial road was associated with a significantly higher increase in total fatalities. When compared to non-arterial roads, the higher the ratio of highways and main arterial roads, there was an association with higher fatality rates. These results have important implications for road safety professionals. They suggest that once the road and street structure is put in place, that will influence whether a city has low or high traffic fatality rates. A city with higher proportion of wider roads and large city blocks will tend to have higher traffic fatality rates, and therefore in turn require much more efforts in police enforcement and other road safety measures. Urban planners need to know that smaller block size with relatively less wide roads will result in lower traffic fatality rates and this needs to be incorporated at the planning stage. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

A study on the relationship between urban roads and car fuel consumption based on the ST-matching algorithm

NASA Astrophysics Data System (ADS)

Liu, Mingshan; Zhang, Wenbo; Zhou, Yuan; Xun, Yanqin; Wang, Rui

2017-07-01

Since the study of fuel consumptions is of great importance and the related data is accessible, many researches about factors affecting fuel consumptions have appeared.To sum up, the driving style of drivers, automobile emissions and the type of the routes are the mainly three factors.Classification is relatively single.In order to improve the classification accuracy' this text studies that there exist some special roads,when drivers drive through them,their fuel consumptions will be similar because of road qualities.To achieve this goal, the first step is to calculate fuel consumptions per 100km of all city roads.Recognizing and examining special roads based on the ST-Matching algorithm.Third is to analyze road qualities of special roads like the length of roads, the speed of driving, and compare them with other common roads.Then we choose 4 cases to analyze. We find that when driving through special roads, fuel consumptions would be similar because of road qualities.Besides, the average length of special roads is longer than common roads' and the mean velocity, the speed of getting and off special roads are faster than common roads'.The findings in this paper can filter out special road segments as noisy data in the study of relationship between driving styles and fuel consumptions,and it also has very high practical significance on recommending fuel-efficient paths.

A GIS tool to analyze forest road sediment production and stream impacts

Treesearch

Ajay Prasad; David G. Tarboton; Charles H. Luce; Thomas A. Black

2005-01-01

A set of GIS tools to analyze the impacts of forest roads on streams considering sediment production, mass wasting risk, and fish passage barriers, has been developed. Sediment production for each road segment is calculated from slope, length, road surface condition and road-side drain vegetation gathered by a GPS inventory and by overlaying the road path on a Digital...

Potential interaction between transport and stream networks over the lowland rivers in Eastern India.

PubMed

Roy, Suvendu; Sahu, Abhay Sankar

2017-07-15

Extension of transport networks supports good accessibility and associated with the development of a region. However, transport lines have fragmented the regional landscape and disturbed the natural interplay between rivers and their floodplains. Spatial analysis using multiple buffers provides information about the potential interaction between road and stream networks and their impact on channel morphology of a small watershed in the Lower Gangetic Plain. Present study is tried to understand the lateral and longitudinal disconnection in headwater stream by rural roads with the integration of geoinformatics and field survey. Significant (p < 0.001) growth of total road length and number of road-stream crossing in the last five decades (1970s-2010s) contribute to making longitudinal and lateral disconnection in the fluvial system of Kunur River Basin. Channel geometry from ten road-stream crossings shows significant (p = 0.01) differences between upstream and downstream of crossing structure and created problems like downstream scouring, increased drop height at outlet, formation of stable bars, severe bank erosion, and make barriers for river biota. The hydro-geomorphic processes are also adversely affected due to lateral disconnection and input of fine to coarse sediments from the river side growth of unpaved road (1922%). Limited streamside development, delineation of stream corridor, regular monitoring and engineering efficiency for the construction of road and road-stream crossing might be effective in managing river geomorphology and riverine landscape. Copyright © 2017 Elsevier Ltd. All rights reserved.

Dynamic path planning for autonomous driving on various roads with avoidance of static and moving obstacles

NASA Astrophysics Data System (ADS)

Hu, Xuemin; Chen, Long; Tang, Bo; Cao, Dongpu; He, Haibo

2018-02-01

This paper presents a real-time dynamic path planning method for autonomous driving that avoids both static and moving obstacles. The proposed path planning method determines not only an optimal path, but also the appropriate acceleration and speed for a vehicle. In this method, we first construct a center line from a set of predefined waypoints, which are usually obtained from a lane-level map. A series of path candidates are generated by the arc length and offset to the center line in the s - ρ coordinate system. Then, all of these candidates are converted into Cartesian coordinates. The optimal path is selected considering the total cost of static safety, comfortability, and dynamic safety; meanwhile, the appropriate acceleration and speed for the optimal path are also identified. Various types of roads, including single-lane roads and multi-lane roads with static and moving obstacles, are designed to test the proposed method. The simulation results demonstrate the effectiveness of the proposed method, and indicate its wide practical application to autonomous driving.

75 FR 25195 - Kake to Petersburg Transmission Line Intertie Project

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-07

... existing roads for construction and long-term maintenance access where possible. New road segments would be.... Both routes would use existing roads for construction and long-term maintenance access where possible...). Both alternative routes follow existing logging roads for the majority of their lengths. In addition...

Cost estimators for construction of forest roads in the central Appalachians

Treesearch

Deborah, A. Layton; Chris O. LeDoux; Curt C. Hassler; Curt C. Hassler

1992-01-01

Regression equations were developed for estimating the total cost of road construction in the central Appalachian region. Estimators include methods for predicting total costs for roads constructed using hourly rental methods and roads built on a total-job bid basis. Results show that total-job bid roads cost up to five times as much as roads built than when equipment...

Area-wide traffic calming for preventing traffic related injuries.

PubMed

Bunn, F; Collier, T; Frost, C; Ker, K; Roberts, I; Wentz, R

2003-01-01

It is estimated that by 2020 road traffic crashes will have moved from ninth to third in the world disease burden ranking, as measured in disability adjusted life years, and second in developing countries. The identification of effective strategies for the prevention of traffic related injuries is of global health importance. Area-wide traffic calming schemes that discourage through traffic on residential roads is one such strategy. To evaluate the effectiveness of area-wide traffic calming in preventing traffic related crashes, injuries, and deaths. We searched the following electronic databases: Cochrane Injuries Group's Specialised Register, Cochrane Controlled Trials Register, MEDLINE, EMBASE and TRANSPORT (NTIS, TRIS, TRANSDOC). We searched the web sites of road safety organisations, handsearched conference proceedings, checked reference lists of relevant papers and contacted experts in the area. The search was not restricted by language or publication status. Randomised controlled trials, and controlled before-after studies of area-wide traffic calming schemes. Two reviewers independently extracted data on type of study, characteristics of intervention and control areas, and length of data collection periods. Before and after data were collected on the total number of road traffic crashes, all road user deaths and injuries, pedestrian-motor vehicle collisions and road user deaths. The statistical package STATA was used to calculate rate ratios for each study, which were then pooled to give an overall estimate using a random effects model. We found no randomised controlled trials, but 16 controlled before-after trials met our inclusion criteria. Seven studies were done in Germany, six in the UK, two in Australia and one in the Netherlands. There were no studies in low or middle income countries. Eight trials reported the number of road traffic crashes resulting in deaths. The pooled rate ratio was 0.63 (0.14, 2.59 95% CI). Sixteen studies reported the number of road traffic crashes resulting in injuries (fatal and non fatal). The pooled rate ratio was 0.89 (0.80, 1.00 95% CI). Nine studies reported the total number of road traffic crashes. The pooled rate ratio was 0.95 (0.81, 1.11 95% CI). Thirteen trials reported the number of pedestrian-motor vehicle collisions. The pooled rate ratio was 1.00 (0.84, 1.18). There was significant heterogeneity for the total number of crashes and deaths and injuries. The results from this review suggest that area-wide traffic calming in towns and cities may be a promising intervention for reducing the number of road traffic injuries, and deaths. However, further rigorous evaluations of this intervention are needed.

Seed spillage from grain trailers on road verges during oilseed rape harvest: an experimental survey.

PubMed

Bailleul, Diane; Ollier, Sébastien; Huet, Sylvie; Gardarin, Antoine; Lecomte, Jane

2012-01-01

Anthropogenic vectors enhance the natural dispersal capacity of plant seeds significantly in terms of quantity and distance. Human-mediated seed dispersal (i.e. anthropochory) greatly increases the dispersal of crop species across agroecosystems. In the case of oilseed rape (OSR), spillage of seeds from grain trailers during harvest has never been quantified. Our experimental approach involved establishing 85 seed trap-sites on the road verges of an agricultural area around the grain silo of Selommes (Loir-et-Cher, France). We recorded OSR spillage during harvest and applied a linear model to the data. The amount of seed spilled was related positively to the area of the OSR fields served by the road, whereas the amount of seed spilled decreased with other variables, such as distance from the trap-site to the verge of the road and to the nearest field. The distance to the grain silo, through local and regional effects, affected seed loss. Local effects from fields adjacent to the road resulted in a cumulative spillage on one-lane roads. On two-lane roads, spillage was nearly constant whatever the distance to the silo due to a mixture of these local effects and of grain trailers that joined the road from more distant fields. From the data, we predicted the number of seeds lost from grain trailers on one road verge in the study area. We predicted a total spillage of 2.05 × 10(6) seeds (± 4.76 × 10(5)) along the road length, which represented a mean of 404 ± 94 seeds per m(2). Containment of OSR seeds will always be challenging. However, seed spillage could be reduced if grain trailers were covered and filled with less seed. Reducing distances travelled between fields and silos could also limit seed loss.

Solar potential scaling and the urban road network topology

NASA Astrophysics Data System (ADS)

Najem, Sara

2017-01-01

We explore the scaling of cities' solar potentials with their number of buildings and reveal a latent dependence between the solar potential and the length of the corresponding city's road network. This scaling is shown to be valid at the grid and block levels and is attributed to a common street length distribution. Additionally, we compute the buildings' solar potential correlation function and length in order to determine the set of critical exponents typifying the urban solar potential universality class.

Required length of guardrails before hazards.

PubMed

Tomasch, E; Sinz, W; Hoschopf, H; Gobald, M; Steffan, H; Nadler, B; Nadler, F; Strnad, B; Schneider, F

2011-11-01

One way to protect against impacts during run-off-road accidents with infrastructure is the use of guardrails. However, real-world accidents indicate that vehicles can leave the road and end up behind the guardrail. These vehicles have no possibility of returning to the lane. Vehicles often end up behind the guardrail because the length of the guardrails installed before hazards is too short; this can lead to a collision with a shielded hazard. To identify the basic speed for determining the necessary length of guardrails, we analyzed the speed at which vehicles leave the roadway from the ZEDATU (Zentrale Datenbank Tödlicher Unfälle) real-world accidents database. The required length of guardrail was considered the length that reduces vehicle speed at a maximum theoretically possible deceleration of 0.3g behind the barrier based on real-world road departure speed. To determine the desired length of a guardrail ahead of a hazard, we developed a relationship between guardrail length and the speed at which vehicles depart the roadway. If the initial elements are flared away from the carriageway, the required length will be reduced by up to an additional 30% The ZEDATU database analysis showed that extending the current length of guardrails to the evaluated required length would reduce the number of fatalities among occupants of vehicles striking bridge abutments by approximately eight percent. Copyright © 2011 Elsevier Ltd. All rights reserved.

Spatial and temporal patterns in erosion from forest roads

Treesearch

Charles H. Luce; Thomas A. Black

2001-01-01

Erosion from forest roads is an important contribution to the sediment budget of many forested basins, particularly over short time scales. Sediment production from 74 road segments was measured over three years to examine how road slope, segment length, cutslope height, and soil texture affect sediment production and how these relationships change with time. In the...

The route of the Three Notch'd Road : a preliminary report.

DOT National Transportation Integrated Search

1975-01-01

Of the many colonial roads constructed during the eighteenth century as settlement moved across Piedmont and Southside Virginia, a few have remained virtually intact and in service as state roads over most of their length. One of the most significant...

The input and output management of solid waste using DEA models: A case study at Jengka, Pahang

NASA Astrophysics Data System (ADS)

Mohamed, Siti Rosiah; Ghazali, Nur Fadzrina Mohd; Mohd, Ainun Hafizah

2017-08-01

Data Envelopment Analysis (DEA) as a tool for obtaining performance indices has been used extensively in several of organizations sector. The ways to improve the efficiency of Decision Making Units (DMUs) is impractical because some of inputs and outputs are uncontrollable and in certain situation its produce weak efficiency which often reflect the impact for operating environment. Based on the data from Alam Flora Sdn. Bhd Jengka, the researcher wants to determine the efficiency of solid waste management (SWM) in town Jengka Pahang using CCRI and CCRO model of DEA and duality formulation with vector average input and output. Three input variables (length collection in meter, frequency time per week in hour and number of garbage truck) and 2 outputs variables (frequency collection and the total solid waste collection in kilogram) are analyzed. As a conclusion, it shows only three roads from 23 roads are efficient that achieve efficiency score 1. Meanwhile, 20 other roads are in an inefficient management.

Use of adaptive cruise control functions on motorways and urban roads: Changes over time in an on-road study.

PubMed

Pereira, Marta; Beggiato, Matthias; Petzoldt, Tibor

2015-09-01

The study aimed at investigating how drivers use Adaptive Cruise Control and its functions in distinct road environments and to verify if changes occur over time. Fifteen participants were invited to drive a vehicle equipped with a Stop & Go Adaptive Cruise Control system on nine occasions. The course remained the same for each test run and included roads on urban and motorway environments. Results showed significant effect of experience for ACC usage percentage, and selection of the shortest time headway value in the urban road environment. This indicates that getting to know a system is not a homogenous process, as mastering the use of all the system's functions can take differing lengths of time in distinct road environments. Results can be used not only for the development of the new generation of systems that integrate ACC functionalities but also for determining the length of training required to operate an ACC system. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Evaluation of Traffic Density Parameters as an Indicator of Vehicle Emission-Related Near-Road Air Pollution: A Case Study with NEXUS Measurement Data on Black Carbon

EPA Science Inventory

An important factor in evaluating health risk of near-road air pollution is to accurately estimate the traffic-related vehicle emission of air pollutants. Inclusion of traffic parameters such as road length/area, distance to roads, and traffic volume/intensity into models such as...

Community-Based Decision-Making: Application of Web ...

EPA Pesticide Factsheets

Living, working, and going to school near roadways has been associated with a number of adverse health effects, including asthma exacerbation, cardiovascular impairment, and respiratory symptoms. In the United States, 30% - 45% of urban populations live or work in the near-road environment, with a greater percentage of minority and low-income residents living in areas with highly- trafficked roadways. Near-road studies typically use surrogates of exposure to evaluate potential causality of health effects, including proximity, traffic counts, or total length of roads within a given radius. In contrast, simplified models provide an opportunity to examine how changes in input parameters, such as vehicle counts or speeds, can affect air quality. Simplified or reduced-form models typically retain the same or similar algorithms most responsible for characterizing uncertainty in more sophisticated models. The Community Line Source modeling system (C-LINE) allows users to explore what-if scenarios such as increases in diesel trucks or total traffic; examine hot spot conditions and areas for further study; determine ideal monitor placement locations; or evaluate air quality changes due to traffic re-routing. This presentation describes the input parameters, analytical procedures, visualization routines, and software considerations for C-LINE, and an example application for Newport News, Virginia. Results include scenarios related to port development and resulting traffic

Deadly rural road traffic injury: a rising public health concern in I.R. Iran.

PubMed

Ardalan, Ali; Sepehrvand, Nariman; Pourmalek, Farshad; Masoumi, Gholamreza; Sarvar, Mohamad; Mahmoudabadi, Abbas; Rezaie, Anita

2014-02-01

The 5(th) Iran National Development Plan, 2011-2015, has emphasized on expansion of rural asphalt roads. This article aims to illustrate the trend of deaths caused by rural road traffic crashes (RTCs) and its association with length of the rural roads in Iran. We carried out a retrospective analysis on secondary data for the period from 2005 to 2010. The Iranian Forensic Medicine Organization, High Commission for Road Safety and Iran's Statistical Center were the sources for the number of RTC death, length of the road and population data, respectively. Number of RTC deaths in rural roads increased from 1,672 in 2005 to 2,206 in 2010. This was associated with expansion of the rural asphalt roads (P = 0.04). The construction of urban asphalt roads was also on an increasing trend, but the number of traffic deaths in these roads decreased from 26,083 in 2005 to 21,043 in 2010. Adjusted for 100,000 populations, the number of traffic deaths in urban roads showed a decrease from 37.0 to 28.0, while this number increased from 2.4 to 2.9 in rural roads during the study period. Although expansion of rural roads would contribute to economic development in rural areas, it exposes people to risk of severe RTCs if effective preventive actions are not taken. To prevent this threat, the Iranian policy makers need to take the followings into consideration: Public awareness, improving the safety of roads and vehicles, law enforcement, increasing coverage of police and Emergency Medical Services.

Deadly Rural Road Traffic Injury: A Rising Public Health Concern in I.R. Iran

PubMed Central

Ardalan, Ali; Sepehrvand, Nariman; Pourmalek, Farshad; Masoumi, Gholamreza; Sarvar, Mohamad; Mahmoudabadi, Abbas; Rezaie, Anita

2014-01-01

Background: The 5th Iran National Development Plan, 2011-2015, has emphasized on expansion of rural asphalt roads. This article aims to illustrate the trend of deaths caused by rural road traffic crashes (RTCs) and its association with length of the rural roads in Iran. Methods: We carried out a retrospective analysis on secondary data for the period from 2005 to 2010. The Iranian Forensic Medicine Organization, High Commission for Road Safety and Iran's Statistical Center were the sources for the number of RTC death, length of the road and population data, respectively. Results: Number of RTC deaths in rural roads increased from 1,672 in 2005 to 2,206 in 2010. This was associated with expansion of the rural asphalt roads (P = 0.04). The construction of urban asphalt roads was also on an increasing trend, but the number of traffic deaths in these roads decreased from 26,083 in 2005 to 21,043 in 2010. Adjusted for 100,000 populations, the number of traffic deaths in urban roads showed a decrease from 37.0 to 28.0, while this number increased from 2.4 to 2.9 in rural roads during the study period. Conclusions: Although expansion of rural roads would contribute to economic development in rural areas, it exposes people to risk of severe RTCs if effective preventive actions are not taken. To prevent this threat, the Iranian policy makers need to take the followings into consideration: Public awareness, improving the safety of roads and vehicles, law enforcement, increasing coverage of police and Emergency Medical Services. PMID:24627755

Cost of skid roads for arch logging in West Virginia

Treesearch

George R., Jr. Trimble; Carl R. Barr

1960-01-01

In the mountain hardwood country of the northern Appalachians, tree-length skidding with tractor and arch has proved to be economical logging. One essential part of this type of logging is that tree-length logs are winched to the skid roads: tractor and arch do not run around through the woods. Winching distance is commonly 200 to 300 feet; and occasionally an extra...

Dynamic origin-to-destination routing of wirelessly connected, autonomous vehicles on a congested network

NASA Astrophysics Data System (ADS)

Davis, L. C.

2017-07-01

Up-to-date information wirelessly communicated among vehicles can be used to select the optimal route between a given origin and destination. To elucidate how to make use of such information, simulations are performed for autonomous vehicles traveling on a square lattice of roads. All the possible routes between the origin and the destination (without backtracking) are of the same length. Congestion is the only determinant of delay. At each intersection, right-of-way is given to the closest vehicle. There are no traffic lights. Trip times of a subject vehicle are recorded for various initial conditions using different routing algorithms. Surprisingly, the simplest algorithm, which is based on the total number of vehicles on a route, is as good as one based on computing travel times from the average velocity of vehicles on each road segment.

[Analysis of particle size characteristics of road sediments in Beijing Olympic Park].

PubMed

Li, Hai-yan; Shi, An-bang; Qu, Yang-sheng; Yue, Jing-lin

2014-09-01

Particle size analysis of road sediment collected in October and November in Beijing Olympic Park indicates that most of the sediments are 76-830 μm; the grain size of the sediments in the area of large population flow is mainly coarse but the grain size in the area of large traffic volume is fine relatively while most of the sediments are <300 p.m. Moreover, sediments of size range <300 μm can be easily accumulated on the road with moderate traffic density. The results demonstrate that the effect of pedestrian flow on the composition of the particles is unobvious and the main influences are the traffic density, extensive construction. With the length of dry period increasing, the content of sediments of size range >300 μm decreases and the content of sediments of size range < 150 μm increases, however, the change of the content of sediments of size range 150-300 μm is not obvious. The results indicate that the effectiveness of the road sediment removal depends on the length of dry period, and the accumulation of different size particles varies differently under the different dry days. Compared with the stone road, surface particles can accumulate on the asphalt road more easily as the accumulation of particles is affected by the road material significantly. Therefore, to reduce the urban surface water pollution, it is necessary to improve the design of park road such as using the stone road, which can decrease the roughness of the road.

Sediment pathways in a tropical forest: effects of logging roads and skid trails

NASA Astrophysics Data System (ADS)

Sidle, Roy C.; Sasaki, Shozo; Otsuki, Mieko; Noguchi, Shoji; Rahim Nik, Abdul

2004-03-01

Significant erosion occurred from recently constructed forest logging roads and skid trails in a small headwater catchment in Peninsular Malaysia. Soil loss was estimated by measuring dimensions of all significant rills and gullies along the road, as well as by measuring height of preserved soil pedestals in sidecast and fill material and on skid trails. Estimates of surface erosion from logging roads and skid trails were 272 +/- 20 t ha-1 year-1 and 275 +/- 20 t ha-1 year-1 respectively. However, owing to lack of connectivity of skid trails to the stream, much of the sediment mobilized on skid trails was stored either on adjacent hillslopes or the trails themselves, rather than being transported to the stream system, as was the case for the road. Steeper skid trails (>20% gradient) had slightly higher erosion rates (320 +/- 24 t ha-1 year-1) than trails with gentler gradients (245-264 t ha-1 year-1). Some 60% of the soil loss on logging roads comes from erosion of the running surface. Disturbed cut and fill material along the road supplied the remaining 40% of the soil loss from roads. Roads and skid trails had no designed drainage systems; runoff discharged onto the hillslope at 25 major discharge nodes from the logging road (690 m total length) and at 34 nodes from skid trails (2300 m). Sediment pathways were either fully or moderately connected to headwater channels at 64% of the logging road nodes, but at only 26% of the nodes emanating from skid trails. A detailed sediment budget revealed that 78% of the soil loss from the road system (including log landings) was delivered to the stream in the first 16 months after logging began. Most (90%) of the deposition from skid trails occurred below just three discharge nodes. Runoff from and onto skid trails often exacerbated the sediment connectivity to channels. Clearly, sediment discharge from logging roads was more highly connected to the stream than discharge from skid trails. Once in the channel, much of this sediment was temporarily stored in the floodplain and behind woody debris.

Time series models for prediction the total and dissolved heavy metals concentration in road runoff and soil solution of roadside embankments

NASA Astrophysics Data System (ADS)

Aljoumani, Basem; Kluge, Björn; sanchez, Josep; Wessolek, Gerd

2017-04-01

Highways and main roads are potential sources of contamination for the surrounding environment. High traffic rates result in elevated heavy metal concentrations in road runoff, soil and water seepage, which has attracted much attention in the recent past. Prediction of heavy metals transfer near the roadside into deeper soil layers are very important to prevent the groundwater pollution. This study was carried out on data of a number of lysimeters which were installed along the A115 highway (Germany) with a mean daily traffic of 90.000 vehicles per day. Three polyethylene (PE) lysimeters were installed at the A115 highway. They have the following dimensions: length 150 cm, width 100 cm, height 60 cm. The lysimeters were filled with different soil materials, which were recently used for embankment construction in Germany. With the obtained data, we will develop a time series analysis model to predict total and dissolved metal concentration in road runoff and in soil solution of the roadside embankments. The time series consisted of monthly measurements of heavy metals and was transformed to a stationary situation. Subsequently, the transformed data will be used to conduct analyses in the time domain in order to obtain the parameters of a seasonal autoregressive integrated moving average (ARIMA) model. Four phase approaches for identifying and fitting ARIMA models will be used: identification, parameter estimation, diagnostic checking, and forecasting. An automatic selection criterion, such as the Akaike information criterion, will use to enhance this flexible approach to model building

Future Roads Near Streams

EPA Pesticide Factsheets

Roads are a source of auto related pollutants (e.g. gasoline, oil and other engine fluids). When roads are near streams, rain can wash these pollutants directly into the stream, harming both water and habitat quality. This metric measured the length of roads within 30 meters of a stream. More information about these resources, including the variables used in this study, may be found here: https://edg.epa.gov/data/Public/ORD/NERL/ReVA/ReVA_Data.zip.

Roads Near Streams

EPA Pesticide Factsheets

Roads are a source of auto related pollutants (e.g. gasoline, oil and other engine fluids). When roads are near streams, rain can wash these pollutants directly into the stream, harming both water and habitat quality. This metric measured the length of roads within 30 meters of a stream. More information about these resources, including the variables used in this study, may be found here: https://edg.epa.gov/data/Public/ORD/NERL/ReVA/ReVA_Data.zip.

Influencing factors on the visibility of surface distresses

NASA Astrophysics Data System (ADS)

Smęt, Wojciech; Skakuj, Marek

2018-05-01

A systematic and future-oriented maintenance management requires quality-assured data regarding the condition of the roadway. An important characteristic for assessing the condition of the road surface are cracks [1]. Experience has proven that the road surface temperature and residual humidity can influence the visibility of cracks. To investigate and quantify these influencing factors in more detail, the Federal Ministry of Transport and Digital Infrastructure has implemented a comprehensive research project [2], during which several measurement campaigns were carried out at different seasons and at different temperatures and humidity degrees of the road surface. The visibility of the cracks was assessed using the German approach ZTV ZEB-StB [3]. After evaluating the cracks, the data was synchronized and the network allocation of the geo-referenced raw data was realized. The relevant condition performance indicators were calculated subsequently. For each evaluation section of 100 meters length, the mean road surface temperature was calculated and, if available, the type and year of construction of the surface course was determined. The evaluated data was visualized to establish correlations between the data and the influencing factors. For the statistical analysis of the results, a total of six comparative scenarios were defined in which the influencing factors of road surface temperature and residual humidity were assessed. This paper documents the results of the research project. In order to obtain a uniform and comparable picture of the condition of the road surface over the years and thus to be able to observe the aging process of the road surface, the measurement campaigns are to be carried out under defined conditions. The research project included proposals for defining and further specifying the measurement conditions.

A GRASS GIS Semi-Stochastic Model for Evaluating the Probability of Landslides Impacting Road Networks in Collazzone, Central Italy

NASA Astrophysics Data System (ADS)

Taylor, Faith E.; Santangelo, Michele; Marchesini, Ivan; Malamud, Bruce D.

2013-04-01

During a landslide triggering event, the tens to thousands of landslides resulting from the trigger (e.g., earthquake, heavy rainfall) may block a number of sections of the road network, posing a risk to rescue efforts, logistics and accessibility to a region. Here, we present initial results from a semi-stochastic model we are developing to evaluate the probability of landslides intersecting a road network and the network-accessibility implications of this across a region. This was performed in the open source GRASS GIS software, where we took 'model' landslides and dropped them on a 79 km2 test area region in Collazzone, Umbria, Central Italy, with a given road network (major and minor roads, 404 km in length) and already determined landslide susceptibilities. Landslide areas (AL) were randomly selected from a three-parameter inverse gamma probability density function, consisting of a power-law decay of about -2.4 for medium and large values of AL and an exponential rollover for small values of AL; the rollover (maximum probability) occurs at about AL = 400 m.2 The number of landslide areas selected for each triggered event iteration was chosen to have an average density of 1 landslide km-2, i.e. 79 landslide areas chosen randomly for each iteration. Landslides were then 'dropped' over the region semi-stochastically: (i) random points were generated across the study region; (ii) based on the landslide susceptibility map, points were accepted/rejected based on the probability of a landslide occurring at that location. After a point was accepted, it was assigned a landslide area (AL) and length to width ratio. Landslide intersections with roads were then assessed and indices such as the location, number and size of road blockage recorded. The GRASS-GIS model was performed 1000 times in a Monte-Carlo type simulation. Initial results show that for a landslide triggering event of 1 landslide km-2 over a 79 km2 region with 404 km of road, the number of road blockages ranges from 6 to 17, resulting in one road blockage every 24-67 km of roads. The average length of road blocked was 33 m. As we progress with model development and more sophisticated network analysis, we believe this semi-stochastic modelling approach will aid civil protection agencies to get a rough idea for the probability of road network potential damage (road block number and extent) as the result of different magnitude landslide triggering event scenarios.

How congestion shapes cities: from mobility patterns to scaling

PubMed Central

Louf, Rémi; Barthelemy, Marc

2014-01-01

The recent availability of data for cities has allowed scientists to exhibit scalings which present themselves in the form of a power-law dependence on population of various socio-economical and structural indicators. We propose here a stochastic theory of urban growth which accounts for some of the observed scalings and we confirm these predictions on US and OECD empirical data. In particular, we show that the dependence on population size of the total number of miles driven daily, the total length of the road network, the total traffic delay, the total consumption of gasoline, the quantity of CO2 emitted and the relation between area and population of cities, are all governed by a single parameter which characterizes the sensitivity to congestion. Our results suggest that diseconomies associated with congestion scale superlinearly with population size, implying that –despite polycentrism– cities whose transportation infrastructure rely heavily on traffic sensitive modes are unsustainable. PMID:24990624

Looking southeast, this photograph shows the length of the north ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking southeast, this photograph shows the length of the north elevation of E Building - Department of Energy, Mound Facility, Electronics Laboratory Building (E Building), One Mound Road, Miamisburg, Montgomery County, OH

Mobile assessment of on-road air pollution and its sources along the East-West Highway in Bhutan

NASA Astrophysics Data System (ADS)

Wangchuk, Tenzin; Knibbs, Luke D.; He, Congrong; Morawska, Lidia

2015-10-01

Human exposures in transportation microenvironments are poorly represented by ambient stationary monitoring. A number of on-road studies using vehicle-based mobile monitoring have been conducted to address this. Most previous studies were conducted on urban roads in developed countries where the primary emission source was vehicles. Few studies have examined on-road pollution in developing countries in urban settings. Currently, no study has been conducted for roadways in rural environments where a substantial proportion of the population live. This study aimed to characterize on-road air quality on the East-West Highway (EWH) in Bhutan and identify its principal sources. We conducted six mobile measurements of PM10, particle number (PN) count and CO along the entire 570 km length of the EWH. We divided the EWH into five segments, R1-R5, taking the road length between two district towns as a single road segment. The pollutant concentrations varied widely along the different road segments, with the highest concentrations for R5 compared with other road segments (PM10 = 149 μg/m3, PN = 5.74 × 104 particles/cm-3, CO = 0.19 ppm), which is the final segment of the road to the capital. Apart from vehicle emissions, the dominant sources were road works, unpaved roads and roadside combustion activities. Overall, the highest contributions above the background levels were made by unpaved roads for PM10 (6 times background), and vehicle emissions for PN and CO (5 and 15 times background, respectively). Notwithstanding the differences in instrumentation used and particle size range measured, the current study showed lower PN concentrations compared with similar on-road studies. However, concentrations were still high enough that commuters, road maintenance workers and residents living along the EWH, were potentially exposed to elevated pollutant concentrations from combustion and non-combustion sources. Future studies should focus on assessing the dispersion patterns of roadway pollutants and defining the short- and long-term health impacts of exposure in Bhutan, as well as in other developing countries with similar characteristics.

Towards a more sustainable transport infrastructure: how spatial geological data can be utilized to improve early stage Life cycle assessment of road infrastructure

NASA Astrophysics Data System (ADS)

Karlsson, Caroline; Miliutenko, Sofiia; Björklund, Anna; Mörtberg, Ulla; Olofsson, Bo; Toller, Susanna

2017-04-01

Environmental impacts during the life cycle stages of transport infrastructure are substantial, including among other greenhouse gas (GHG) emissions, as well as resource and energy use. For transport infrastructure to be sustainable, such issues need to be integrated in the planning process. Environmental Impact Assessment (EIA) is required by the European Union (EU) in order to ensure that all environmental aspects are considered during planning of road infrastructure projects. As a part of this process, the European Commission has suggested the use of the tool life cycle assessment (LCA) for assessing life cycle energy use and GHG emissions. When analyzing life cycle impacts of the road infrastructure itself, it was shown that earthworks and materials used for the road construction have a big share in the total energy use and GHG emissions. Those aspects are largely determined by the geological conditions at the site of construction: parameters such as soil thickness, slope, bedrock quality and soil type. The geological parameters determine the amounts of earthworks (i.e. volumes of soil and rock that will be excavated and blasted), transportation need for excavated materials as well as the availability of building materials. The study presents a new geographic information system (GIS)-based approach for utilizing spatial geological data in three dimensions (i.e. length, width and depth) in order to improve estimates on earthworks during the early stages of road infrastructure planning. Three main methodological steps were undertaken: mass balance calculation, life cycle inventory analysis and spatial mapping of greenhouse gas (GHG) emissions and energy use. The proposed GIS-based approach was later evaluated by comparing with the actual values of extracted material of a real road construction project. The results showed that the estimate of filling material was the most accurate, while the estimate for excavated soil and blasted rock had a wide variation from the actual values. It was also found that the total volume of excavated and ripped soils did not change when accounting for geological stratigraphy. The proposed GIS-based approach shows promising results for usage in LCA at an early stage of road infrastructure planning, and by providing better data quality, GIS in combination with LCA can enable planning for a more sustainable transport infrastructure.

18 CFR Appendix A to Part 2 - Guidance for Determining the Acceptable Construction Area for Replacements

Code of Federal Regulations, 2011 CFR

2011-04-01

.... Typical work spaces are: Item Typical extra area (width/length) Two lane road (bored) 25-50 by 100 feet. Four lane road (bored) 50 by 100 feet. Major river (wet cut) 100 by 200 feet. Intermediate stream (wet...

Spatial variability in levels of benzene, formaldehyde, and total benzene, toluene, ethylbenzene and xylenes in New York City: a land-use regression study.

PubMed

Kheirbek, Iyad; Johnson, Sarah; Ross, Zev; Pezeshki, Grant; Ito, Kazuhiko; Eisl, Holger; Matte, Thomas

2012-07-31

Hazardous air pollutant exposures are common in urban areas contributing to increased risk of cancer and other adverse health outcomes. While recent analyses indicate that New York City residents experience significantly higher cancer risks attributable to hazardous air pollutant exposures than the United States as a whole, limited data exist to assess intra-urban variability in air toxics exposures. To assess intra-urban spatial variability in exposures to common hazardous air pollutants, street-level air sampling for volatile organic compounds and aldehydes was conducted at 70 sites throughout New York City during the spring of 2011. Land-use regression models were developed using a subset of 59 sites and validated against the remaining 11 sites to describe the relationship between concentrations of benzene, total BTEX (benzene, toluene, ethylbenzene, xylenes) and formaldehyde to indicators of local sources, adjusting for temporal variation. Total BTEX levels exhibited the most spatial variability, followed by benzene and formaldehyde (coefficient of variation of temporally adjusted measurements of 0.57, 0.35, 0.22, respectively). Total roadway length within 100 m, traffic signal density within 400 m of monitoring sites, and an indicator of temporal variation explained 65% of the total variability in benzene while 70% of the total variability in BTEX was accounted for by traffic signal density within 450 m, density of permitted solvent-use industries within 500 m, and an indicator of temporal variation. Measures of temporal variation, traffic signal density within 400 m, road length within 100 m, and interior building area within 100 m (indicator of heating fuel combustion) predicted 83% of the total variability of formaldehyde. The models built with the modeling subset were found to predict concentrations well, predicting 62% to 68% of monitored values at validation sites. Traffic and point source emissions cause substantial variation in street-level exposures to common toxic volatile organic compounds in New York City. Land-use regression models were successfully developed for benzene, formaldehyde, and total BTEX using spatial indicators of on-road vehicle emissions and emissions from stationary sources. These estimates will improve the understanding of health effects of individual pollutants in complex urban pollutant mixtures and inform local air quality improvement efforts that reduce disparities in exposure.

Progressive transmission of road network

NASA Astrophysics Data System (ADS)

Ai, Bo; Ai, Tinghua; Tang, Xinming; Li, Zhen

2009-10-01

The progressive transmission of vector map data requires efficient multi-scale data model to process the data into hierarchical structure. This paper presents such a data structure of road network without redundancy of geometry for progressive transmission. For a given scale, the road network display has to settle two questions. One is which road objects to be represented and the other is what geometric details to be visualized for the selected roads. This paper combines the Töpfer law and the BLG-tree structure into a multi-scale representation matrix to answer simultaneously the above two questions. In the matrix, rows from top to bottom represent the roads in the sequence of descending classification of traffic and length, which can support the Töpfer law to retrieve the more important roads. In a row, columns record one road by a linear BLG-tree to provide good line graphics.

Geospatial and clinical analyses on pediatric related road traffic injury in Malaysia.

PubMed

Rahman, Nik Hisamuddin; Rainis, Ruslan; Noor, Syed Hatim; Syed Mohamad, Sharifah Mastura

2016-01-01

The main aim of this study is to utilize the geographical information system (GIS) software and perform the spatial analysis in relation to clinical data for road traffic injury (RTI) pediatric cases attending the emergency department. The study sample included pediatric patients (age less than 18 years) with road-related injuries within a district in Malaysia who attended emergency departments of two tertiary hospitals within the district. In addition to injury, pre-hospital care and outcome data, the coordinate of the locations were obtained by the ambulance paramedics by using portable handheld GPS unit brand Garmin(®) model GPS 72 H. The data was transferred into the excel format which in turn underwent GIS analysis by using ARCGIS(®) (by ESRI) software version 10.1 licensed to the study institution. A total of 102 (24.8%) of all motor vehicle crash (MVC) victims involved the pediatric age group (age 18 years and below). The mean (SD) age of the pediatric victims was 14.30 years (SD 3.830). Male comprised of 68 (66.7%) of the cases. Motorcyclists [88 (88.0%)] were the most common type of victims involved. Interestingly, the majority of the severely injured victims [75 (73%)] sustained the RTI on roads with maximum speed limit of 60 km/hour. The mean (SD) length of hospital stay was 7.83 days (5.59). The pediatric related road traffic injury in Malaysia causes significant health and social burden in the country. This study showed both important clinical and geographical factors that need to be taken into consideration for future preventive action.

Geospatial and clinical analyses on pediatric related road traffic injury in Malaysia

PubMed Central

Rahman, Nik Hisamuddin; Rainis, Ruslan; Noor, Syed Hatim; Syed Mohamad, Sharifah Mastura

2016-01-01

BACKGROUND: The main aim of this study is to utilize the geographical information system (GIS) software and perform the spatial analysis in relation to clinical data for road traffic injury (RTI) pediatric cases attending the emergency department. METHODS: The study sample included pediatric patients (age less than 18 years) with road-related injuries within a district in Malaysia who attended emergency departments of two tertiary hospitals within the district. In addition to injury, pre-hospital care and outcome data, the coordinate of the locations were obtained by the ambulance paramedics by using portable handheld GPS unit brand Garmin® model GPS 72 H. The data was transferred into the excel format which in turn underwent GIS analysis by using ARCGIS® (by ESRI) software version 10.1 licensed to the study institution. RESULTS: A total of 102 (24.8%) of all motor vehicle crash (MVC) victims involved the pediatric age group (age 18 years and below). The mean (SD) age of the pediatric victims was 14.30 years (SD 3.830). Male comprised of 68 (66.7%) of the cases. Motorcyclists [88 (88.0%)] were the most common type of victims involved. Interestingly, the majority of the severely injured victims [75 (73%)] sustained the RTI on roads with maximum speed limit of 60 km/hour. The mean (SD) length of hospital stay was 7.83 days (5.59). CONCLUSION: The pediatric related road traffic injury in Malaysia causes significant health and social burden in the country. This study showed both important clinical and geographical factors that need to be taken into consideration for future preventive action. PMID:27547282

A model of jam formation in congested traffic

NASA Astrophysics Data System (ADS)

Bunzarova, N. Zh; Pesheva, N. C.; Priezzhev, V. B.; Brankov, J. G.

2017-12-01

We study a model of irreversible jam formation in congested vehicular traffic on an open segment of a single-lane road. The vehicles obey a stochastic discrete-time dynamics which is a limiting case of the generalized Totally Asymmetric Simple Exclusion Process. Its characteristic features are: (a) the existing clusters of jammed cars cannot break into parts; (b) when the leading vehicle of a cluster hops to the right, the whole cluster follows it deterministically, and (c) any two clusters of vehicles, occupying consecutive positions on the chain, may become nearest-neighbors and merge irreversibly into a single cluster. The above dynamics was used in a one-dimensional model of irreversible aggregation by Bunzarova and Pesheva [Phys. Rev. E 95, 052105 (2017)]. The model has three stationary non-equilibrium phases, depending on the probabilities of injection (α), ejection (β), and hopping (p) of particles: a many-particle one, MP, a completely jammed phase CF, and a mixed MP+CF phase. An exact expression for the stationary probability P(1) of a completely jammed configuration in the mixed MP+CF phase is obtained. The gap distribution between neighboring clusters of jammed cars at large lengths L of the road is studied. Three regimes of evolution of the width of a single gap are found: (i) growing gaps with length of the order O(L) when β > p; (ii) shrinking gaps with length of the order O(1) when β < p; and (iii) critical gaps at β = p, of the order O(L 1/2). These results are supported by extensive Monte Carlo calculations.

Road traffic and childhood leukemia: the ESCALE study (SFCE).

PubMed

Amigou, Alicia; Sermage-Faure, Claire; Orsi, Laurent; Leverger, Guy; Baruchel, André; Bertrand, Yves; Nelken, Brigitte; Robert, Alain; Michel, Gérard; Margueritte, Geneviève; Perel, Yves; Mechinaud, Françoise; Bordigoni, Pierre; Hémon, Denis; Clavel, Jacqueline

2011-04-01

Traffic is a source of environmental exposures, including benzene, which may be related to childhood leukemia. A national registry-based case-control study [ESCALE (Etude Sur les Cancers et les Leucémies de l'Enfant, Study on Environmental and Genetic Risk Factors of Childhood Cancers and Leukemia)] carried out in France was used to assess the effect of exposure to road traffic exhaust fumes on the risk of childhood leukemia. Over the study period, 2003-2004, 763 cases and 1,681 controls < 15 years old were included, and the controls were frequency matched with the cases on age and sex. The ESCALE data were collected by a standardized telephone interview of the mothers. Various indicators of exposure to traffic and pollution were determined using the geocoded addresses at the time of diagnosis for the cases and of interview for the controls. Indicators of the distance from, and density of, main roads and traffic nitrogen dioxide (NO(2)) concentrations derived from traffic emission data were used. Odds ratios (ORs) were estimated using unconditional regression models adjusted for potential confounders. Acute leukemia (AL) was significantly associated with estimates of traffic NO(2) concentration at the place of residence > 27.7 µg/m(3) compared with NO(2) concentration < 21.9 µg/m(3) [OR=1.2; confidence interval (CI), 1.0-1.5] and with the presence of a heavy-traffic road within 500 m compared with the absence of a heavy-traffic road in the same area (OR=2.0; 95% CI, 1.0-3.6). There was a significant association between AL and a high density of heavy-traffic roads within 500 m compared with the reference category with no heavy-traffic road within 500 m (OR=2.2; 95% CI, 1.1-4.2), with a significant positive linear trend of the association of AL with the total length of heavy-traffic road within 500 m. This study supports the hypothesis that living close to heavy-traffic roads may increase the risk of childhood leukemia.

[Accidents on Iceland's most dangerous roads].

PubMed

Bjarnason, Thóroddur; Arnarsson, Sveinn

2012-02-01

The objective of this paper was to identify the most dangerous segments of the Icelandic road system in terms of the number of accidents pr km and the rate of accidents pr million km travelled. First to identify the segments where the number of accidents is highest and where the risk of the individual traveller is the greatest. Second to evaluate if the association between the number and the rate of accidents is positive or negative. Third to identify the road segments that are the most dangerous in the sense of many accidents and great risk to individual travellers. Main roads outside urban centers were divided into 45 segments that were on average 78 km in length. Infrequently travelled roads and roads within urban centers were omitted. Information on the length of roads, traffic density and number of accidents was used to calculate the number of accidents per km and the rate of accidents per million km travelled. The correlation between the number and rate of accidents was calculated and the most dangerous road segments were identified by the average rank order on both dimensions. Most accidents pr km occurred on the main roads to and from the capital region, but also east towards Hvolsvöllur, north towards Akureyri and in the Mideast region of the country. The rate of accidents pr million km travelled was highest in the northeast region, in northern Snæfellsnes and in the Westfjords. The most dangerous roads on both dimensions were in Mideast, northern Westfjords, in the north between Blönduós and Akureyri and in northern Snæfellsnes. Most accidents pr km occurred on roads with a low accident rate pr million km travelled. It is therefore possible to reduce accidents the most by increasing road safety where it is already the greatest but that would however increase inequalities in road safety. Policy development in transportation is therefore in part a question of priorities in healthcare. Individual equality in safety and health are not always fully compatible with economic concerns and the interests of the majority.

The economic cost of road traffic crashes in an urban setting

PubMed Central

García‐Altés, A; Pérez, K

2007-01-01

The objective of this article is to assess the total economic costs of road traffic crashes in Barcelona, a metropolitan city located in Southern Europe. A cost‐of‐illness study was conducted using a prevalence approximation, a societal and healthcare system perspective, and a 1‐year time horizon. Results were measured in terms of Euros in 2003. Total costs of road traffic crashes in Barcelona in 2003 were €367 million. Direct costs equalled €329 million (89.8% of total costs), including property damage costs, insurance administration costs and hospital costs. Police, emergency costs and transportation costs had a minimum effect on total direct costs. Indirect costs were €37 million, including lost productivity due to hospitalization and mortality. The results of the sensitivity analysis showed the upper limit of total economic cost of road traffic crashes in Barcelona to be €782 million. This is the first study to estimate the costs of road traffic crashes for a city in a developed country. The importance of the problem calls for further interventions to reduce road traffic crashes. PMID:17296693

[Effects of road construction on regional vegetation types].

PubMed

Liu, Shi-Liang; Liu, Qi; Wang, Cong; Yang, Jue-Jie; Deng, Li

2013-05-01

As a regional artificial disturbance component, road exerts great effects on vegetation types, and plays a substantial role in defining vegetation distribution to a certain extent. Aiming at the tropical rainforest degradation and artificial forest expansion in Yunnan Province of Southwest China, this paper analyzed the effects of road network extension on regional vegetation types. In the Province, different classes of roads had different effects on the vegetation types, but no obvious regularity was observed in the effects on the patch areas of different vegetation types due to the great variations of road length and affected distance. However, the vegetation patch number was more affected by lower class roads because of their wide distribution. As for different vegetation types, the vegetations on cultivated land were most affected by roads, followed by Castanopsis hystrix and Schima wallichii forests. Road network formation contributed most to the vegetation fragmentation, and there existed significant correlations between the human disturbance factors including village- and road distributions.

On-road driving impairments and associated cognitive deficits after stroke.

PubMed

Devos, Hannes; Tant, Mark; Akinwuntan, Abiodun E

2014-01-01

Little is known about the critical on-road driving skills that get affected after a stroke. The purpose of this study was to investigate the key on-road driving impairments and their associated cognitive deficits after a stroke. A second aim was to investigate if lateralization of stroke impacts results of the cognitive and on-road driving tests. In this cross-sectional study, 99 participants with a first-ever stroke who were actively driving prior to stroke underwent a cognitive battery and a standardized road test that evaluated 13 specific on-road driving skills. These on-road driving skills were mapped onto an existing, theoretical framework that categorized the on-road items into hierarchic clusters of operational, tactical, visuo-integrative, and mixed driving skills. The total score on the road test and the on-road decision, made by a certified fitness-to-drive expert, decided the main outcome. The critical on-road driving skills predicting the on-road decision were identified using logistic regression analysis. Linear regression analysis was employed to determine the cognitive impairments leading to poor total on-road scores. Analyses were repeated for right- and left-sided strokes. In all, 37 persons scored poorly on the road test. These participants performed worse in all hierarchic clusters of on-road driving. Performances on the operational cluster and the visuo-integrative cluster best predicted on-road decisions (R(2) = 0.60). 'Lane changing' and 'understanding, insight, and quality of traffic participation' were the critical skill deficits leading to poor performance on the road test (R(2) = 0.65). Divided attention was the main determinant of on-road scores in the total group (R(2) = 0.06). Participants with right-sided stroke performed worse on visual field, visual neglect, visual scanning, visuo-constructive skills, and divided attention compared with those with left-sided stroke. Divided attention was the main determinant of total on-road scores in the right-sided stroke group (R(2) = 0.10). A combination of visual scanning, speed of processing, and executive dysfunction yielded the best model to predict on-road scores in left-sided strokes (R(2) = 0.46). Poor performance in the road test after stroke is determined by critical operational and visuo-integrative driving impairments. Specific and different driving evaluation and training programs are needed for right- and left-sided strokes. © 2014 S. Karger AG, Basel.

75 FR 69619 - East Reservoir Project; Kootenai National Forest, Lincoln County, MT

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-15

... harvest. Vegetation treatments total approximately 13,000 acres of treated area. (2) Road management includes new road construction, road storage and adding existing, undetermined roads to the National Forest Service road system. Approximately 2.04 miles of new road construction is proposed. Approximately 40 miles...

Injury characteristics and outcome of road traffic accident among victims at Adult Emergency Department of Tikur Anbessa specialized hospital, Addis Ababa, Ethiopia: a prospective hospital based study.

PubMed

Seid, Mohammed; Azazh, Aklilu; Enquselassie, Fikre; Yisma, Engida

2015-05-20

Road traffic injuries are the eighth leading cause of death globally, and the leading cause of death for young people. More than a million people die each year on the world's roads, and the risk of dying as a result of a road traffic injury is highest in Africa. A prospective hospital based study was undertaken to assess injury characteristics and outcome of road traffic accident among victims at Adult Emergency Department of Tikur Anbessa specialized hospital, Addis Ababa, Ethiopia. A structured pre-tested questionnaire was used to gather the required data. The collected data were analyzed using SPSS version 20.0. Hierarchical multiple regression analysis was used to identify predictors of fatalities among the road traffic crash victims. A total of 230 road traffic accident victims were studied. The majority of the study subjects were men 165 (71.7%) and the male/female ratio was 2.6:1. The victims' ages ranged from 14 to 80 years with the mean and standard deviations of 32.15 and ± 14.38 years respectively. Daily laborers (95 (41.3%)) and students (28 (12.2%)) were the majority of road traffic accident victims. Head (50.4%) and musculoskeletal (extremities) (47.0%) were the most common body region injured. Fractures (78.0%) and open wounds (56.5%) were the most common type of injuries sustained. The overall length of hospital stay (LOS) ranged from 1 day to 61 days with mean (± standard deviation) of 7.12 ± 10.5 days and the mortality rate was 7.4%. Hierarchical multiple regression analysis showed that age of the victims (ß = 0.16, p < 0.05), systolic blood pressure on admission (ß = -0.35, p < 0.001) and Glasgow coma scale (ß = -0.44, p < 0.001) were statistically significant predictors of fatalities among the victims. This study showed diverse injury characteristics and high morbidity and mortality among the victims attending Adult Emergency Department of Tikur Anbessa specialized hospital, Addis Ababa, Ethiopia. The findings reflect that road traffic accident is a major public health problem. Urgent road traffic accident preventive measures and prompt treatment of the victims are warranted in order to reduce morbidity and mortality among the victims.

Testing road surface treatments to reduce erosion in forest roads in Honduras [Tratamientos de la superficie de rodadura para reducir la erosion en caminos forestales en Honduras

USGS Publications Warehouse

Rivera, Samuel; Kershner, Jeffrey L.; Keller, Gordon R.

2009-01-01

Testing road surface treatments to reduce erosion in forest roads in Honduras. Cien. Inv. Agr. 36(3):425-432. Using forest roads produces more erosion and sedimentation than any other forest or agricultural activity. This study evaluated soil losses from a forest road in central Honduras over two consecutive years. We divided a 400-m segment of road into 8 experimental units, each 50 m in length. Four units were treated with Best Management Practices (BMPs) and four were left untreated. The BMP treatments included reshaping the road prism, installing culverts and reshaping of road ditches, compacting 20-cm layers of the road tread, crowning the road surface (3% slope, double drainage), longitudinal sloping (less than 12%), and adding a 10-cm layer of gravel (crush size = 0.63 cm). Soil movement was measured daily during the rainy seasons. The highest soil loss occurred in the control road, around 500 m3 km-1 per year, while the road treated with BMP lost approximately 225 m3km-1 per year. These results show that road surface erosion can be reduced up to 50% with the implementation of surface treatments.

Soil surface lowering due to soil erosion in villages near Lake Victoria, Uganda

NASA Astrophysics Data System (ADS)

de Meyer, A.; Deckers, J.; Poesen, J.; Isabirye, M.

2009-04-01

In the effort to pinpoint the sources of sediment pollution in Lake Victoria, the contribution of sedi-ment from compounds, landing sites, main roads and footpaths is determined in the catchment of Na-bera Bay and Kafunda Bay at the northern shore of Lake Victoria in southern Uganda. The amount of soil loss in compounds and landing sites is determined by the reconstruction of the original and current soil surface according to botanical and man-made datable objects. The soil erosion rate is then deter-mined by dividing the eroded soil volume (corrected for compaction) by the age of the oldest datable object. In the study area, the average soil erosion rate in compounds amounts to 107 Mg ha-1 year-1 (per unit compound) and in landing sites to 207 Mg ha-1 year-1 (per unit landing site). Although com-pounds and landing sites occupy a small area of the study area (1.1 %), they are a major source of sediment to Lake Victoria (63 %). The soil loss on footpaths and main roads is calculated by multip-lying the total length of footpaths and main roads with the average width and depth (measured towards a reference surface). After the correction for compaction is carried out, the soil erosion rate on foot-paths amounts to 34 Mg ha-1 year-1 and on main roads to 35 Mg ha-1 year-1. Also footpaths and main roads occupy a small area of the study area (1.1 %), but contribute disproportionately to the total soil loss in the catchment (22 %). In this research, the information about the village/compound given by the villager/owner is indispensable. In accordance to an adaptation of the model of McHugh et al. (2002), 32 % of the sediment that is generated in the catchment, is deposited in Lake Victoria (i.e. 2 209 Mg year-1 or 0.7 Mg ha-1 year-1). The main buffer in the study area is papyrus at the shore of Lake Victoria. Also sugarcane can be a major buffer. However, the sugarcane-area is intersected by com-pounds, landing sites, footpaths and main roads that generate large amounts of sediment and function as main bypass mechanisms (high CR) facilitating and enhancing sediment delivery to Lake Victoria.

Epidemiology of Road Traffic Injuries Treated in a Large Romanian Emergency Department in Tîrgu-Mureş Between 2009 and 2010.

PubMed

Rus Ma, Diana; Peek-Asa, Corinne; Baragan, Erika Andrada; Chereches, Razvan Mircea; Mocean, Floarea

2015-01-01

Road traffic injuries are one of the leading causes of preventable unintentional injury. The European Injury Database estimated that in European Union (EU)-27 countries, road traffic injuries account for 10% of all injuries treated in the emergency department or admitted to the hospital, accounting for 4.2 million victims each year. We examined the characteristics and outcomes of road traffic injuries treated in a large emergency department in Romania by different types of road users. Secondary data analysis was conducted on a sample of patients who suffered a transport-related injury and received care at the Emergency Department of Mures County Emergency Hospital in Romania. Data was collected by 2 trained emergency physicians between March 2009 and July 2010, as part of the European Injury Database project. Information about demographics, mechanism, nature, place of occurrence, and activity of injury; treatment and follow-up; and mode of transport were described for 5 different categories of road users: animal-drawn vehicle (operator and passenger), passenger car (driver and passenger), motorcycle (driver and passenger), bicyclist, and pedestrian. A total of 2,782 patients were treated in the emergency department, of which 718 (25.8%) were road traffic injuries. The male-to-female ratio was 2:1. The highest percentage of patients were injured in passenger cars (49%), followed by motorcycles (16.7%). For both types of road users, the majority of patients were between the ages of 18 and 29. Pedestrian injuries accounted for 14.6%, of which a third were children up to the age of 17 and 40% were adults and elderly over the age of 50. The majority of patients were injured due to contact with a moving object (48.1%), followed by contact with static object (23.5%), then falling, stumbling, jumping, or being pushed (19.6%). Contusion and bruises (54.9%) were the most common diagnosis, followed by fractures (20.1%) and open wounds (10.2%) for all road user categories. The most common part of the body injured for all road user categories was the head region (42.3%). Of the 34.9% patients treated and admitted to the hospital, 30% had a length of stay between 4 and 7 days. Understanding the extent, nature, and characteristics of road traffic injuries may help to identify vulnerable road users in specific settings and implement the most effective prevention strategies targeting the most affected populations.

Epidemiology of Road Traffic Injuries Treated in a Large Romanian Emergency Department in Tîrgu-Mureş Between 2009 and 2010

PubMed Central

MA, DIANA RUS; PEEK-ASA, CORINNE; BARAGAN, ERIKA ANDRADA; CHERECHES, RAZVAN MIRCEA; MOCEAN, FLOAREA

2017-01-01

Objective Road traffic injuries are one of the leading causes of preventable unintentional injury. The European Injury Database estimated that in European Union (EU)-27 countries, road traffic injuries account for 10% of all injuries treated in the emergency department or admitted to the hospital, accounting for 4.2 million victims each year. We examined the characteristics and outcomes of road traffic injuries treated in a large emergency department in Romania by different types of road users. Methods Secondary data analysis was conducted on a sample of patients who suffered a transport-related injury and received care at the Emergency Department of Mures County Emergency Hospital in Romania. Data was collected by 2 trained emergency physicians between March 2009 and July 2010, as part of the European Injury Database project. Information about demographics, mechanism, nature, place of occurrence, and activity of injury; treatment and follow-up; and mode of transport were described for 5 different categories of road users: animal-drawn vehicle (operator and passenger), passenger car (driver and passenger), motorcycle (driver and passenger), bicyclist, and pedestrian. Results A total of 2,782 patients were treated in the emergency department, of which 718 (25.8%) were road traffic injuries. The male-to-female ratio was 2:1. The highest percentage of patients were injured in passenger cars (49%), followed by motorcycles (16.7%). For both types of road users, the majority of patients were between the ages of 18 and 29. Pedestrian injuries accounted for 14.6%, of which a third were children up to the age of 17 and 40% were adults and elderly over the age of 50. The majority of patients were injured due to contact with a moving object (48.1%), followed by contact with static object (23.5%), then falling, stumbling, jumping, or being pushed (19.6%). Contusion and bruises (54.9%) were the most common diagnosis, followed by fractures (20.1%) and open wounds (10.2%) for all road user categories. The most common part of the body injured for all road user categories was the head region (42.3%). Of the 34.9% patients treated and admitted to the hospital, 30% had a length of stay between 4 and 7 days. Conclusions Understanding the extent, nature, and characteristics of road traffic injuries may help to identify vulnerable road users in specific settings and implement the most effective prevention strategies targeting the most affected populations. PMID:25830568

Automated analysis of timber access road alternatives.

Treesearch

Doyle Burke

1974-01-01

The evaluation of timber access road alternatives is one of the primary tasks in timber harvest planning and design. During the planning stages, it is also one of the most difficult to accomplish quantitatively because a basis for comparison is related to such values as grade, length, horizontal and vertical curvature, and volumes of excavation and embankment. Within...

Mitigation of environmental impacts due to ghat road formation in Palamalai Hills, South India, by optimizing cut and fill volumes using GPS and GIS techniques.

PubMed

Arulmozhi, R; Subramani, T; Sukumar, S

2015-01-01

Formation of new roads generally brings about adverse impact on the environment, and in the case of hill roads, the impact is diverse and effective measures are required to mitigate it. The common problems in hill road formation are tree cutting, destruction of canopies, change in land use pattern, soil erosion, slope instability, induced landslides, invasion of foreign species, and so on. Removal of trees and vegetations causes rapid soil erosion, landslides, and invasion of foreign species posing danger to the survival of weak native species. Dumping of surplus earth materials on the valley side poses a significant threat to the environment as it would cause induced landslides. Using the cut earth for filling in road formation and dumping, the surplus cut earth in safe locations will reduce environmental degradation considerably. Conventionally, hill road alignments are finalized using traditional survey methods using ghat tracer, compass, and leveling surveys which require enormous complicated field and office works. Any revision to reduce the quantum of earthwork is difficult in this method due to its complex nature. In the present study at Palamalai Hills, South India, an alignment for a length of 7.95 km was prepared by traditional methods using ghat tracer and total station instruments for survey works. The earthwork quantities were ascertained from the longitudinal profile of the alignment. A GPS survey was also conducted along the alignment to examine its utility in alignment modification. To modify the stretches, where the earthwork cutting and filling are above normal and unbalanced and result in surplus earth, repeated GPS surveys were conducted along different paths to optimize the earthwork. The earthwork quantities of the original alignment were analyzed, and its correlation with environmental effect and the usefulness of the GPS survey in this task are presented in this paper.

A scenario planning approach for disasters on Swiss road network

NASA Astrophysics Data System (ADS)

Mendes, G. A.; Axhausen, K. W.; Andrade, J. S.; Herrmann, H. J.

2014-05-01

We study a vehicular traffic scenario on Swiss roads in an emergency situation, calculating how sequentially roads block due to excessive traffic load until global collapse (gridlock) occurs and in this way displays the fragilities of the system. We used a database from Bundesamt für Raumentwicklung which contains length and maximum allowed speed of all roads in Switzerland. The present work could be interesting for government agencies in planning and managing for emergency logistics for a country or a big city. The model used to generate the flux on the Swiss road network was proposed by Mendes et al. [Physica A 391, 362 (2012)]. It is based on the conservation of the number of vehicles and allows for an easy and fast way to follow the formation of traffic jams in large systems. We also analyze the difference between a nonlinear and a linear model and the distribution of fluxes on the Swiss road.

Do Atmospheric Circulation Patterns Explain Variability and Trends in The Seasonality of Oulu-Hailuoto Ice Road in Northern Finland?

NASA Astrophysics Data System (ADS)

Ahmadi, B.; Kiani, S.; Irannezhad, M.; Ronkanen, A. K.; Kløve, B.; Moradkhani, H.

2016-12-01

In cold climate regions, ice roads are engineered as temporary winter transportation routes on the frozen seas, lakes and rivers. The ice road season parameters (start, end and length) are principally dependent on the thickness of ice, which is naturally controlled by temperature in terms of freezing (FDDs) and thawing (TDDs) degree-days. It has been shown that the variations in FDDs and TDDs are influenced by large-scale atmospheric circulation patterns (ACPs). Therefore, this study aims at understanding the role of ACPs in variability and trends in the seasonality of Oulu-Hailuoto ice road in northern Finland during 1974-2009. The Mann-Kendall nonparametric trend test determined significant shortening in the length of ice road season over the study period of 1974-2009, which can be attributed to later start and earlier end days. In the study area, the maximum ice thickness of the Baltic Sea also showed significant declines over time. Such sea ice thinning can be associated with the wintertime temperature warming manifested by the decreasing trend found in the cumulative FDD during October-January in the water year (September-August). The increased cumulative TDD during February-April also reflects warmer climate in spring, which has resulted in the earlier end day of the ice road season. Measuring the Spearman's rank correlation identified the Arctic Oscillation as the most significant ACP influencing variations in the cumulative FDD, and accordingly in the ice thickness and the start day. However, the cumulative TDD during February-April shows significant positive correlation with the East Atlantic (EA) pattern, which appears to control the end day of the Oulu-Hailuoto ice road season.

Glass half-full: On-road glance metrics differentiate crashes from near-crashes in the 100-Car data.

PubMed

Seppelt, Bobbie D; Seaman, Sean; Lee, Joonbum; Angell, Linda S; Mehler, Bruce; Reimer, Bryan

2017-10-01

Much of the driver distraction and inattention work to date has focused on concerns over drivers removing their eyes from the forward roadway to perform non-driving-related tasks, and its demonstrable link to safety consequences when these glances are timed at inopportune moments. This extensive literature has established, through the analyses of glance from naturalistic datasets, a clear relationship between eyes-off-road, lead vehicle closing kinematics, and near-crash/crash involvement. This paper looks at the role of driver expectation in influencing drivers' decisions about when and for how long to remove their eyes from the forward roadway in an analysis that consider the combined role of on- and off-road glances. Using glance data collected in the 100-Car Naturalistic Driving Study (NDS), near-crashes were examined separately from crashes to examine how momentary differences in glance allocation over the 25-s prior to a precipitating event can differentiate between these two distinct outcomes. Individual glance metrics of mean single glance duration (MSGD), total glance time (TGT), and glance count for off-road and on-road glance locations were analyzed. Output from the AttenD algorithm (Kircher and Ahlström, 2009) was also analyzed as a hybrid measure; in threading together on- and off-road glances over time, its output produces a pattern of glance behavior meaningful for examining attentional effects. Individual glance metrics calculated at the epoch-level and binned by 10-s units of time across the available epoch lengths revealed that drivers in near-crashes have significantly longer on-road glances, and look less frequently between on- and off- road locations in the moments preceding a precipitating event as compared to crashes. During on-road glances, drivers in near-crashes were found to more frequently sample peripheral regions of the roadway than drivers in crashes. Output from the AttenD algorithm affirmed the cumulative net benefit of longer on-road glances and of improved attention management between on- and off-road locations. The finding of longer on-road glances differentiating between safety-critical outcomes in the 100-Car NDS data underscores the importance of attention management in how drivers look both on and off the road. It is in the pattern of glances to and from the forward roadway that drivers obtained critical information necessary to inform their expectation of hazard potential to avoid a crash. This work may have important implications for attention management in the context of the increasing prevalence of in-vehicle demands as well as of vehicle automation. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

California bearing ratio analysis on Kunduran - Goa Terawangan road, Blora Regency

NASA Astrophysics Data System (ADS)

Lashari, Widodo, Aris; Azizah, Nur

2018-03-01

The study about California Bearing Ratio on subgrade is required as the road infrastructure. Some researchers has conducted studies about California Bearing Ratio in both laboratory and the field to figure out the load bearing capacity of the existing soil in the field. The Kunduran - Goa Terawang road is a regency road which connects the Kunduran district and Todanan district. The length of the Kunduran - Goa Terawang is 11,44 km with the endpoint identifier (STA 0 road) from T intersection 3/49 on the provincial road km 25. The Kunduran - Goa Terawang road has experienced damaged from time to time. Therefore, the condition of load bearing capacity on the subgrade must be analysed. The value of load bearing capacity of the subgrade on the road. The California Bearing Ratio had to be conducted to figure out the value. The California Bearing Ratio test was conducted in two ways, 1) the laboratory California Bearing Ratio testing and the field California Bearing Ration using the Dynamic Cone Penetrometer. The testing was conducted in three points, STA 0+250, STA 0+500, dan STA 0+750.

Physical soil properties and slope treatments effects on hydraulic excavator productivity for forest road construction.

PubMed

Parsakho, Aidin; Hosseini, Seyed Ataollah; Jalilvand, Hamid; Lotfalian, Majid

2008-06-01

Effects of moisture, porosity and soil bulk density properties, grubbing time and terrain side slopes on pc 220 komatsu hydraulic excavator productivity were investigated in Miana forests road construction project which located in the northern forest of Iran. Soil moisture and porosity determined by samples were taken from undisturbed soil. The elements of daily works were measured with a digital stop watch and video camera in 14 observations (days). The road length and cross section profiles after each 20 m were selected to estimate earthworks volume. Results showed that the mean production rates for the pc 220 komatsu excavators were 60.13 m3 h(-1) and earthwork 14.76 m h(-1) when the mean depth of excavation or cutting was 4.27 m3 m(-1), respectively. There was no significant effects (p = 0.5288) from the slope classes' treatments on productivity, whereas grubbing time, soil moisture, bulk density and porosity had significantly affected on excavator earthworks volume (p < 0.0001). Clear difference was showed between the earthwork length by slope classes (p = 0.0060). Grubbing time (p = 0.2180), soil moisture (p = 0.1622), bulk density (p = 0.2490) and porosity (p = 0.2159) had no significant effect on the excavator earthworks length.

Characterizing the spatial distribution of ambient ultrafine particles in Toronto, Canada: A land use regression model.

PubMed

Weichenthal, Scott; Van Ryswyk, Keith; Goldstein, Alon; Shekarrizfard, Maryam; Hatzopoulou, Marianne

2016-01-01

Exposure models are needed to evaluate the chronic health effects of ambient ultrafine particles (<0.1 μm) (UFPs). We developed a land use regression model for ambient UFPs in Toronto, Canada using mobile monitoring data collected during summer/winter 2010-2011. In total, 405 road segments were included in the analysis. The final model explained 67% of the spatial variation in mean UFPs and included terms for the logarithm of distances to highways, major roads, the central business district, Pearson airport, and bus routes as well as variables for the number of on-street trees, parks, open space, and the length of bus routes within a 100 m buffer. There was no systematic difference between measured and predicted values when the model was evaluated in an external dataset, although the R(2) value decreased (R(2) = 50%). This model will be used to evaluate the chronic health effects of UFPs using population-based cohorts in the Toronto area. Crown Copyright © 2015. Published by Elsevier Ltd. All rights reserved.

The Application of a WEPP Technology to a Complex Watershed Analysis

NASA Astrophysics Data System (ADS)

Elliot, William; Miller, Ina Sue; Dobre, Mariana

2017-04-01

Forest restoration activities are essential in many forest stands, where previous management and fire suppression has resulted in stands with high density, diseased trees and excessive fuel loads. Trying to balance the watershed impacts of restoration activities such as thinning, selective harvesting, and prescribed fire against the significant impact of wildfire is challenging. The process is further aggravated by the necessity of a road network if management activities include timber removal. We propose to present an approach to a watershed analysis for a 3400-ha of fuel reduction project within an 18,0000-ha sensitive watershed in the Nez Perce National Forest in Northern Idaho, USA. The FlamMap fire spread model was first used to predict the distribution of potential fire severity on the landscape for the current fuel load, and for a landscape that had been treated by thinning and/or prescribed fire. FlamMap predicts the flame length by 30-m pixel as a function of fuel load and water content, wind speed, and slope steepness and aspect. The flame length distribution was then classified so that the distribution of burn severity (unburned, low, moderate and high severity) was similar to the distributions observed on recent wildfires in the Forest. The flame length classes determined for the current fuel loads were also used for the treated condition flame lengths, where predominantly unburned or low severity fire severities were predicted. The burn severity maps were uploaded to a web site that was developed to provide soil and management files reflecting burn severity and soil texture, formatted for the Geospatial interface to the Water Erosion Prediction Project (GeoWEPP). The study area was divided into 40 sub watersheds under 2.5 km2 each for GeoWEPP analysis. GeoWEPP was run for an undisturbed forest; for the burn severity following wildfire for the current and treated fuel loads; for prescribed fire, either broadcast or jack pot burn; and for thinning either by tractor or by skyline logging. The GeoWEPP erosion estimates by hillslope polygon were merged with the proposed treatment polygons to produce maps of erosion for each condition for each treatment polygon. Road network erosion was estimated using a new online GIS tool to estimate road segment length and steepness, and linking those topographic values to the WEPP model for erosion prediction by road segment. The results were summarized and compared to earlier estimates of sediment delivery using a locally-developed cumulative watershed effects analysis. The results were similar from both tools, in spite of using very different erosion estimation methods, and similar to regional observations of forest watershed sediment delivery ( 12.5 Mg/sq km). The study found that the erosion risk from wildfire was 5 times greater than sediment generated by forest management, justifying the proposed restoration activities to reduce fire risk. Sediment generated from the road network, however, was unacceptably high suggesting that methods improve road erosion prediction and/or to reduce road erosion are warranted.

Optimal policies for aggregate recycling from decommissioned forest roads.

PubMed

Thompson, Matthew; Sessions, John

2008-08-01

To mitigate the adverse environmental impact of forest roads, especially degradation of endangered salmonid habitat, many public and private land managers in the western United States are actively decommissioning roads where practical and affordable. Road decommissioning is associated with reduced long-term environmental impact. When decommissioning a road, it may be possible to recover some aggregate (crushed rock) from the road surface. Aggregate is used on many low volume forest roads to reduce wheel stresses transferred to the subgrade, reduce erosion, reduce maintenance costs, and improve driver comfort. Previous studies have demonstrated the potential for aggregate to be recovered and used elsewhere on the road network, at a reduced cost compared to purchasing aggregate from a quarry. This article investigates the potential for aggregate recycling to provide an economic incentive to decommission additional roads by reducing transport distance and aggregate procurement costs for other actively used roads. Decommissioning additional roads may, in turn, result in improved aquatic habitat. We present real-world examples of aggregate recycling and discuss the advantages of doing so. Further, we present mixed integer formulations to determine optimal levels of aggregate recycling under economic and environmental objectives. Tested on an example road network, incorporation of aggregate recycling demonstrates substantial cost-savings relative to a baseline scenario without recycling, increasing the likelihood of road decommissioning and reduced habitat degradation. We find that aggregate recycling can result in up to 24% in cost savings (economic objective) and up to 890% in additional length of roads decommissioned (environmental objective).

Optimization design of urban expressway ramp control

NASA Astrophysics Data System (ADS)

Xu, Hongke; Li, Peiqi; Zheng, Jinnan; Sun, Xiuzhen; Lin, Shan

2017-05-01

In this paper, various types of expressway systems are analyzed, and a variety of signal combinations are proposed to mitigate traffic congestion. And various signal combinations are used to verify the effectiveness of the multi-signal combinatorial control strategy. The simulation software VISSIM was used to simulate the system. Based on the network model of 25 kinds of road length combinations and the simulation results, an optimization scheme suitable for the practical road model is summarized. The simulation results show that the controller can reduce the travel time by 25% under the large traffic flow and improve the road capacity by about 20%.

Erosion Control Techniques on Forest Road Cutslopes and Fillslopes in North Alabama

Treesearch

Johnny M. Grace

1999-01-01

Road cutslopes and fillslopes account for approximately 50 percent of the total road disturbance area on steep terrain and contribute as much as 60 percent of sediment from forest roads. The significance of erosion control techniques on these vulnerable components of the road prism has become evident in recent years. A study to gain a better understanding of erosion...

36 CFR 223.41 - Payment when purchaser elects government road construction.

Code of Federal Regulations, 2010 CFR

2010-07-01

... government road construction. 223.41 Section 223.41 Parks, Forests, and Public Property FOREST SERVICE... Conditions and Provisions § 223.41 Payment when purchaser elects government road construction. Each contract having a provision for construction of specified roads with total estimated construction costs of $50,000...

Empirical prediction of mechanical properties of flexible pavement through GPR

NASA Astrophysics Data System (ADS)

Bianchini Ciampoli, Luca; Benedetto, Andrea

2017-04-01

To date, it is well known that the frequency of accidental events recorded on a road, is related to the deterioration rate of its pavement. In this sense, the monitoring of the pavement health over a road network is a crucial task for the administrations, to define a priority scale for maintenance works, and accordingly to lower the risk of accidents. Several studies suggest the possibility to employ Ground-penetrating Radar (GPR) to overcome the limits of traditional bearing tests, which due to their low productivity and high costs, can only give a discrete knowledge about the strength of the pavement. This work presents a GPR-based empirical model for the prediction of the bearing capacity of a road pavement, expressed as Young's Modulus. The model exploits the GPR to extract information on the thickness of the base course and the clay content, by referring to the signal velocity and attenuation, respectively. To test the effectiveness of the model, experimental activities have been accounted for. In particular, multi-frequency GPR tests have been performed along road sections of rural roads, composed of a flexible pavement, for a total of 45 Km. As ground-truth, light falling weight deflectometer (LFWD) and Curviameter have been employed. Both the electromagnetic and the mechanical datasets have been properly processed, in order to reduce misinterpretations and to raise the statistical significance of the procedure. Hence, the calibration of the parameters composing the model was run in a subsection, equal to 8% of the total length, randomly selected within the surveyed track. Finally, as validation, the model has been applied to the whole analysed dataset. As a result, the empirical model showed a good effectiveness in predicting the mechanical response of the pavement, with a normalised root mean squared deviation equal to 0.27. Finally, by averaging the measured and predicted mechanical data every 50 m and sorting the results into strength classes, a qualitative approach useful for a visual detection of low-resistance areas has been also proposed. This study demonstrates the efficiency and reliability of GPR in mechanical assessment of flexible pavements. This empirical approach can represent a useful tool for administrations and companies managing road assets, for a non-destructive detection of the areas interested by early stage deterioration processes, and the definition of a priority-based scheduling of maintenance works. Acknowledgements The Authors thank COST, for funding the Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar."

Cost analysis of facial injury treatment in two university hospitals in Malaysia: a prospective study

PubMed Central

Saperi, Bin Sulong; Ramli, Roszalina; Ahmed, Zafar; Muhd Nur, Amrizal; Ibrahim, Mohd Ismail; Rashdi, Muhd Fazlynizam; Nordin, Rifqah; Rahman, Normastura Abd; Yusoff, Azizah; Nazimi, Abd Jabar; Abdul Rahman, Roselinda; Abdul Razak, Noorhayati; Mohamed, Norlen

2017-01-01

Objective Facial injury (FI) may occur in isolation or in association with injuries to other parts of the body (facial and other injury [FOI]). The objective of this study was to determine the direct treatment costs incurred during the management of facial trauma. Materials and methods A prospective cohort study on treatment cost for FIs and FOIs due to road-traffic crashes in two university hospitals in Malaysia was conducted from July 2010 to June 2011. The patients were recruited from emergency departments and reviewed after 6 months from the date of initial treatment. Direct cost analysis, comparison of cost and length of hospital stay, and Injury Severity Score (ISS) were performed. Results A total of 190 patients were enrolled in the study, of whom 83 (43.7%) had FI only, and 107 (56.3%) had FOI. The mean ISS was 5.4. The mean length of stay and costs for patients with FI only were 5.8 days with a total cost of US$1,261.96, whereas patients with FOI were admitted for 7.8 days with a total cost of US$1,716.47. Costs doubled if the treatment was performed under general anesthesia compared to local anesthesia. Conclusion Treatment of FI and FOI imposes a financial burden on the health care system in Malaysia. PMID:28223831

Comparison of the yields of downstream migrant salmonids before and after logging and road construction on the South Fork Caspar Creek, Mendocino County

Treesearch

David S. Graves; James W. Burns

1970-01-01

Yields of juvenile steelhead rainbow trout Salmo gairdnerii gairdnerii) and silver salmon (Oncorhynchus kisutch) emigrants were compared in South Fork Caspar Creek, a small coastal stream in Mendocino County, California, before and after construction of a logging road along the stream in the summer of 1967. Numbers, lengths, and age class structures were compared....

How Does Decommissioning Forest Roads Effect Hydrologic and Geomorphic Risk?

NASA Astrophysics Data System (ADS)

Black, T.; Luce, C.; Cissel, R. M.; Nelson, N.; Staab, B.

2010-12-01

The US Forest Service is investigating road decommissioning projects to understand how treatments change hydrologic and geomorphic risks. Road treatment effect was measured using a before after control impact design (BACI), using the Geomorphic Road Analysis and Inventory Package (http://www.fs.fed.us/GRAIP). This suite of inventory and analysis tools evaluates: road-stream hydrologic connectivity, fine sediment production and delivery, shallow landslide risk, gully initiation risk, and risks associated with stream crossing failures. The Skokomish River study site is steep and wet and received a high intensity treatment including the removal of stream crossing pipes and fills, all ditch relief pipes and a full hillslope recontouring. Road to stream hydrologic connectivity was reduced by 70%. The treatments reduced fine sediment delivery by 21.8 tons or 81%. The removal of the stream crossing culverts and large associated road fills eliminated the risk of pipe plugging related failures and the eventual erosion of over 4,000 m3 of fill. The slope stability risk was assessed using a modified version of SINMAP (Pack et al, 2005). Risk below drain point locations on the original road was reduced as water was redistributed across the hillslope to waterbars and diffuse drainage. It is unclear; however, if landslide risk was reduced across the entire treated road length because treatments slightly increased risk in some areas where new concentrated drainage features were added above steep slopes. Similarly, values of a gully index ESI (Istanbulluoglu et al, 2003), were reduced at many of the original drainage points, however some new drainage was added. ESI values still exceed a predicted conservative initiation thresholds at some sites, therefore it is uncertain if gully risk will be changed. Mann Creek occupies a moderately steep mid-elevation site in Southern Idaho. The high intensity treatments removed all constructed road drainage features including stream crossing pipes and fills, and recontoured the hillslope. The length of road that was hydrologically connected to streams was reduced by 2,923 m, or 97%. The model predicts that fine sediment delivery was reduced by 98%, to 1.0 ton annually. The risk presented by stream crossings becoming plugged was eliminated. The potential for streamflow diversion onto roads and hillslopes was precluded. The slope stability risk below drain point locations on the original road was reduced as water was no longer concentrated and discharged through a single drainage feature. Treatments are predicted to return slope stability to near undisturbed levels. Gully initiation risks, already low prior to treatment, may be reduced to negligible values. Results from these two case studies suggest that high intensity road decommissioning can be effective at reducing the risk of road sediment delivery, hydrologic connectivity and failures associated with stream crossings. Post storm monitoring will help validate these predictions and reduce uncertainty around the hydrology of decommissioned roads. If decommissioned roads continue to concentrate water and discharge it onto steep slopes, landslides and gully risk may remain elevated.

Bridge Failure Due to Inadequate Design of Bed Protection

NASA Astrophysics Data System (ADS)

Gupta, Yogita; Kaur, Suneet; Dindorkar, Nitin

2017-12-01

The shallow foundation is generally provided on non-erodible strata or where scour depth is less. It is also preferable for low perennial flow or standing water condition. In the present case study shallow foundation is adopted for box type bridge. The total length of the bridge is 132.98 m, consisting of eight unit of RCC box. Each unit is composed of three cell box. The bottom slab of box unit is acted as raft foundation, founded 500 mm below ground level. River bed protection work is provided on both upstream and downstream side along the whole length of the bridge as it is founded above scour level. The bridge collapsed during the monsoon just after two years of service. The present paper explains the cause of failure. This study on failure of the bridge illustrates the importance of bridge inspection before and after monsoon period and importance of the timely maintenance. Standard specifications of Indian Road Congress for the river bed protection work are also included.

A Tool for Modelling the Probability of Landslides Impacting Road Networks

NASA Astrophysics Data System (ADS)

Taylor, Faith E.; Santangelo, Michele; Marchesini, Ivan; Malamud, Bruce D.; Guzzetti, Fausto

2014-05-01

Triggers such as earthquakes or heavy rainfall can result in hundreds to thousands of landslides occurring across a region within a short space of time. These landslides can in turn result in blockages across the road network, impacting how people move about a region. Here, we show the development and application of a semi-stochastic model to simulate how landslides intersect with road networks during a triggered landslide event. This was performed by creating 'synthetic' triggered landslide inventory maps and overlaying these with a road network map to identify where road blockages occur. Our landslide-road model has been applied to two regions: (i) the Collazzone basin (79 km2) in Central Italy where 422 landslides were triggered by rapid snowmelt in January 1997, (ii) the Oat Mountain quadrangle (155 km2) in California, USA, where 1,350 landslides were triggered by the Northridge Earthquake (M = 6.7) in January 1994. For both regions, detailed landslide inventory maps for the triggered events were available, in addition to maps of landslide susceptibility and road networks of primary, secondary and tertiary roads. To create 'synthetic' landslide inventory maps, landslide areas (AL) were randomly selected from a three-parameter inverse gamma probability density function, consisting of a power law decay of about -2.4 for medium and large values of AL and an exponential rollover for small values of AL. The number of landslide areas selected was based on the observed density of landslides (number of landslides km-2) in the triggered event inventories. Landslide shapes were approximated as ellipses, where the ratio of the major and minor axes varies with AL. Landslides were then dropped over the region semi-stochastically, conditioned by a landslide susceptibility map, resulting in a synthetic landslide inventory map. The originally available landslide susceptibility maps did not take into account susceptibility changes in the immediate vicinity of roads, therefore our landslide susceptibility map was adjusted to further reduce the susceptibility near each road based on the road level (primary, secondary, tertiary). For each model run, we superimposed the spatial location of landslide drops with the road network, and recorded the number, size and location of road blockages recorded, along with landslides within 50 and 100 m of the different road levels. Network analysis tools available in GRASS GIS were also applied to measure the impact upon the road network in terms of connectivity. The model was performed 100 times in a Monte-Carlo simulation for each region. Initial results show reasonable agreement between model output and the observed landslide inventories in terms of the number of road blockages. In Collazzone (length of road network = 153 km, landslide density = 5.2 landslides km-2), the median number of modelled road blockages over 100 model runs was 5 (±2.5 standard deviation) compared to the mapped inventory observed number of 5 road blockages. In Northridge (length of road network = 780 km, landslide density = 8.7 landslides km-2), the median number of modelled road blockages over 100 model runs was 108 (±17.2 standard deviation) compared to the mapped inventory observed number of 48 road blockages. As we progress with model development, we believe this semi-stochastic modelling approach will potentially aid civil protection agencies to explore different scenarios of road network potential damage as the result of different magnitude landslide triggering event scenarios.

Public road infrastructure inventory in degraded global navigation satellite system signal environments

NASA Astrophysics Data System (ADS)

Sokolova, N.; Morrison, A.; Haakonsen, T. A.

2015-04-01

Recent advancement of land-based mobile mapping enables rapid and cost-effective collection of highquality road related spatial information. Mobile Mapping Systems (MMS) can provide spatial information with subdecimeter accuracy in nominal operation environments. However, performance in challenging environments such as tunnels is not well characterized. The Norwegian Public Roads Administration (NPRA) manages the country's public road network and its infrastructure, a large segment of which is represented by road tunnels (there are about 1 000 road tunnels in Norway with a combined length of 800 km). In order to adopt mobile mapping technology for streamlining road network and infrastructure management and maintenance tasks, it is important to ensure that the technology is mature enough to meet existing requirements for object positioning accuracy in all types of environments, and provide homogeneous accuracy over the mapping perimeter. This paper presents results of a testing campaign performed within a project funded by the NPRA as a part of SMarter road traffic with Intelligent Transport Systems (ITS) (SMITS) program. The testing campaign objective was performance evaluation of high end commercial MMSs for inventory of public areas, focusing on Global Navigation Satellite System (GNSS) signal degraded environments.

PAH determination based on a rapid and novel gas purge-microsyringe extraction (GP-MSE) technique in road dust of Shanghai, China: Characterization, source apportionment, and health risk assessment.

PubMed

Zheng, Xin; Yang, Yi; Liu, Min; Yu, Yingpeng; Zhou, John L; Li, Donghao

2016-07-01

A novel cleanup technique termed as gas purge-microsyringe extraction (GP-MSE) was evaluated and applied for polycyclic aromatic hydrocarbon (PAH) determination in road dust samples. A total of 68 road dust samples covering almost the entire Shanghai area were analyzed for 16 priority PAHs using gas chromatography-mass spectrometry. The results indicate that the total PAH concentrations over the investigated sites ranged from 1.04μg/g to 134.02μg/g dw with an average of 13.84μg/g. High-molecular-weight compounds (4-6 rings PAHs) were significantly dominant in the total mass of PAHs, and accounted for 77.85% to 93.62%. Diagnostic ratio analysis showed that the road dust PAHs were mainly from the mixture of petroleum and biomass/coal combustions. Principal component analysis in conjunction with multiple linear regression indicated that the two major origins of road dust PAHs were vehicular emissions and biomass/fossil fuel combustions, which contributed 66.7% and 18.8% to the total road dust PAH burden, respectively. The concentration of benzo[a]pyrene equivalent (BaPeq) varied from 0.16μg/g to 24.47μg/g. The six highly carcinogenic PAH species (benz(a)anthracene, benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene, dibenz(a,h)anthracene, and indeno(1,2,3-cd)pyrene) accounted for 98.57% of the total BaPeq concentration. Thus, the toxicity of PAHs in road dust was highly associated with high-molecular-weight compounds. Copyright © 2016 Elsevier B.V. All rights reserved.

Efficacy of buffer zones in disconnecting roads and streams in the coastal plain

Treesearch

J.M. III Grace; E. Davis

2010-01-01

Established forest BMPs rely heavily on the forest floor to disconnect upslope activities from stream systems. Optimizing the buffer length required to negate the storm runoff contribution of upslope activities has been a point of interest for soil scientist, hydrologist, and conservation professionals for the last century. Minimum buffer lengths have been recommended...

A Method for Extracting Road Boundary Information from Crowdsourcing Vehicle GPS Trajectories.

PubMed

Yang, Wei; Ai, Tinghua; Lu, Wei

2018-04-19

Crowdsourcing trajectory data is an important approach for accessing and updating road information. In this paper, we present a novel approach for extracting road boundary information from crowdsourcing vehicle traces based on Delaunay triangulation (DT). First, an optimization and interpolation method is proposed to filter abnormal trace segments from raw global positioning system (GPS) traces and interpolate the optimization segments adaptively to ensure there are enough tracking points. Second, constructing the DT and the Voronoi diagram within interpolated tracking lines to calculate road boundary descriptors using the area of Voronoi cell and the length of triangle edge. Then, the road boundary detection model is established integrating the boundary descriptors and trajectory movement features (e.g., direction) by DT. Third, using the boundary detection model to detect road boundary from the DT constructed by trajectory lines, and a regional growing method based on seed polygons is proposed to extract the road boundary. Experiments were conducted using the GPS traces of taxis in Beijing, China, and the results show that the proposed method is suitable for extracting the road boundary from low-frequency GPS traces, multi-type road structures, and different time intervals. Compared with two existing methods, the automatically extracted boundary information was proved to be of higher quality.

A Method for Extracting Road Boundary Information from Crowdsourcing Vehicle GPS Trajectories

PubMed Central

Yang, Wei

2018-01-01

Crowdsourcing trajectory data is an important approach for accessing and updating road information. In this paper, we present a novel approach for extracting road boundary information from crowdsourcing vehicle traces based on Delaunay triangulation (DT). First, an optimization and interpolation method is proposed to filter abnormal trace segments from raw global positioning system (GPS) traces and interpolate the optimization segments adaptively to ensure there are enough tracking points. Second, constructing the DT and the Voronoi diagram within interpolated tracking lines to calculate road boundary descriptors using the area of Voronoi cell and the length of triangle edge. Then, the road boundary detection model is established integrating the boundary descriptors and trajectory movement features (e.g., direction) by DT. Third, using the boundary detection model to detect road boundary from the DT constructed by trajectory lines, and a regional growing method based on seed polygons is proposed to extract the road boundary. Experiments were conducted using the GPS traces of taxis in Beijing, China, and the results show that the proposed method is suitable for extracting the road boundary from low-frequency GPS traces, multi-type road structures, and different time intervals. Compared with two existing methods, the automatically extracted boundary information was proved to be of higher quality. PMID:29671792

Time domain contact model for tyre/road interaction including nonlinear contact stiffness due to small-scale roughness

NASA Astrophysics Data System (ADS)

Andersson, P. B. U.; Kropp, W.

2008-11-01

Rolling resistance, traction, wear, excitation of vibrations, and noise generation are all attributes to consider in optimisation of the interaction between automotive tyres and wearing courses of roads. The key to understand and describe the interaction is to include a wide range of length scales in the description of the contact geometry. This means including scales on the order of micrometres that have been neglected in previous tyre/road interaction models. A time domain contact model for the tyre/road interaction that includes interfacial details is presented. The contact geometry is discretised into multiple elements forming pairs of matching points. The dynamic response of the tyre is calculated by convolving the contact forces with pre-calculated Green's functions. The smaller-length scales are included by using constitutive interfacial relations, i.e. by using nonlinear contact springs, for each pair of contact elements. The method is presented for normal (out-of-plane) contact and a method for assessing the stiffness of the nonlinear springs based on detailed geometry and elastic data of the tread is suggested. The governing equations of the nonlinear contact problem are solved with the Newton-Raphson iterative scheme. Relations between force, indentation, and contact stiffness are calculated for a single tread block in contact with a road surface. The calculated results have the same character as results from measurements found in literature. Comparison to traditional contact formulations shows that the effect of the small-scale roughness is large; the contact stiffness is only up to half of the stiffness that would result if contact is made over the whole element directly to the bulk of the tread. It is concluded that the suggested contact formulation is a suitable model to include more details of the contact interface. Further, the presented result for the tread block in contact with the road is a suitable input for a global tyre/road interaction model that is also based on the presented contact formulation.

Comparative metagenomics approaches to characterize the soil fungal communities of western coastal region, Saudi Arabia.

PubMed

Moussa, Tarek A A; Al-Zahrani, Hassan S; Almaghrabi, Omar A; Abdelmoneim, Tamer S; Fuller, Michael P

2017-01-01

A total of 145007 reads were obtained from pyrosequencing for all the 4 samples. The total count ranged from 11,301,014 (Mecca old road) to 23,503,512 bp (Thuwal). A total of 460 fungal species belonging to 133 genera, 58 families, 33 orders, 13 classes and 4 phyla was identified across the four sites. The most abundant phylum at all four sites was Ascomycota followed by Basidiomycota. Four phyla (Ascomycota-99.31%, Basidiomycota-0.59%, Chytridiomycota-0.04%, Glomeromycota-0.03%) were detected in Khulais. Except for Glomeromycota, all phyla were detected at Mecca old road (Ascomycota-74.26%, Basidiomycota-25.71%, Chytridiomycota-0.01%) and Thuwal (Ascomycota-99.59%, Basidiomycota-0.40%, Chytridiomycota-0.002%); while only Ascomycota-90.98% and Basidiomycota-9.01% were detected in Asfan road. At the class level, Sordariomycetes was predominantly observed at Asfan road-59.88%, Khulais-68.26% and Thuwal-94.84%; while Pezizomycetes was dominant at Mecca old road-56.01%, was absent at Asfan road. Agaricomycetes was present only at Mecca old road-25.73%; while Tremellomycetes-5.77%, Malasseizomycetes-2.13% and Microbotryomycetes-1.10% were found only at Asfan road. The phylogenetic trees revealed that clear genus level differences are visible across all the four sites, with an overall predominance of Thielavia followed by Madurella, Aspergillus, and Gelasinospora. Chaetomium sp., Aspergillus caespitosus and Aspergillus sp. were found in moderate (Mecca old road and Thuwal) to abundant (Asfan road and Khulais) quantities. Thielavia sp., Thielavia hyalocarpa and Madurella sp. are found in moderate quantities at Khulais and Mecca old road, while in abundant levels at Asfan road and Thuwal. Fusarium equisati and F. oxysporum were detected at Thuwal and Khulais. Sordaria araneosa was present at Khulais, while Malasseiza globosa species was detected in moderate quantities across all sites except Khulais.

Large roads reduce bat activity across multiple species.

PubMed

Kitzes, Justin; Merenlender, Adina

2014-01-01

Although the negative impacts of roads on many terrestrial vertebrate and bird populations are well documented, there have been few studies of the road ecology of bats. To examine the effects of large roads on bat populations, we used acoustic recorders to survey bat activity along ten 300 m transects bordering three large highways in northern California, applying a newly developed statistical classifier to identify recorded calls to the species level. Nightly counts of bat passes were analyzed with generalized linear mixed models to determine the relationship between bat activity and distance from a road. Total bat activity recorded at points adjacent to roads was found to be approximately one-half the level observed at 300 m. Statistically significant road effects were also found for the Brazilian free-tailed bat (Tadarida brasiliensis), big brown bat (Eptesicus fuscus), hoary bat (Lasiurus cinereus), and silver-haired bat (Lasionycteris noctivagans). The road effect was found to be temperature dependent, with hot days both increasing total activity at night and reducing the difference between activity levels near and far from roads. These results suggest that the environmental impacts of road construction may include degradation of bat habitat and that mitigation activities for this habitat loss may be necessary to protect bat populations.

Landslide susceptibility and risk assessment: specificities for road networks

NASA Astrophysics Data System (ADS)

Pellicani, Roberta; Argentiero, Ilenia; Parisi, Alessandro; Spilotro, Giuseppe

2017-04-01

A regional-scale assessment of landslide susceptibility and risk along the main road corridors crossing the provincial territory of Matera (Basilicata Region, Southern Italy) was carried out. The entire provincial road network extends for about 1,320 km through a territory, of which represents the main connection infrastructure among thirty-one municipalities due to the lack of an efficient integrated transportation system through the whole regional territory. For this reason, the strategic importance of these roads consists in their uniqueness in connecting every urban center with the socio-economic surrounding context. These roads and their vehicular traffic are continuously exposed to instability processes (about the 40% of the total length is disrupted by landslides), characterized both by high intensity and low frequency and by low intensity and high frequency. This last typology, consisting in small shallow landslides, is particularly hazardous for the roads since it is widespread along the road network, its occurrence is connected to rainfalls and determines high vulnerability conditions for the road in terms of interruption of vehicular traffic. A GIS-based heuristic-bivariate statistical predictive model was performed to assess and map the landslide susceptibility in the study area, by using a polynomial function of eight predisposing factors, weighted according to their influence on the landslide phenomena, recognized and collected in an inventory. Susceptibility associated to small shallow phenomena was assessed by using a polynomial function of specific factors, such as slope angle and aspect, lithological outcrops, rainfalls, etc. In absence of detailed input data, the spatial distribution of landslide risk along the road corridors was assessed and mapped using a qualitative hazard-consequence matrix approach, by which risk is obtained by combining hazard categories with consequence classes pairwise in a two-dimensional table or matrix. Landslide hazard, which is a function of the return time, due to the lack of temporal data, was evaluated as a function of the landslide intensity (velocity and areal extent) and susceptibility. The direct consequences of instability on the roads were defined by combining exposure and vulnerability in a matrix. Exposure was evaluated in terms of amount of traffic, which was calculated along each road stretch, connecting two or more urban areas, as a function of the average of population of each centers. Vulnerability, which expresses the degree of damage, was assessed in function of the presence of criticalities along roads, which were ranked according to the severity of damages and type of performed reparation works. The consequences, combined with the hazard levels, allowed to assess the landslide risk, classified in low, medium and high levels. The risk map highlighted that about the 30% (392 km) of the examined road corridors is affected by high risk levels. The comparison between the risk map and the landslide inventory recognized along roads has also revealed that the 49.5% of landslides affects sections where the risk was evaluated high. The obtained risk classification of the roads represents a support for decision making and allows to identify the priorities for designing appropriate landslide mitigation plans.

Hospital burden of road traffic injury: major concern in primary and secondary level hospitals in Bangladesh.

PubMed

Mashreky, S R; Rahman, A; Khan, T F; Faruque, M; Svanström, L; Rahman, F

2010-04-01

To assess the burden of road traffic injury (RTI) in primary and secondary level hospitals in Bangladesh, and its economic impact on affected families. Cross-sectional study. The study was carried out in February and March 2001. To estimate the burden of RTI patients and the length of stay in hospital, the discharge records of primary and secondary level hospitals were used as data sources. Records from 16 district hospitals and 45 Upazila health complexes (subdistrict level hospitals), selected at random, were included in this study. A direct interview method was adopted to estimate the patient costs of RTI; this involved interviewing patients or their attendants. In this study, patient costs included money spent by the patient for medicine, transport, food and lodging (including attendants). Approximately 33% of the beds in primary and secondary level hospitals in Bangladesh were occupied by injury-related patients, and more than 19% of the injury patients had been injured in a road traffic accident. People aged 18-45 years were the major victims of RTI, and constituted 70% of the total RTI-related admissions in primary and secondary level hospitals. More than two-thirds of RTI patients were male. The average duration of hospital stay was 5.7 days, and the average patient cost for each RTI patient was US$86 (5834 BDT). RTI is a major cause of hospital admission in Bangladesh, and represents an economic and social burden for the family and the nation. A national strategy and road safety programme need to be developed to reduce the hospital burden and minimize the economic and social impact. 2010 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Development of Gis Tool for the Solution of Minimum Spanning Tree Problem using Prim's Algorithm

NASA Astrophysics Data System (ADS)

Dutta, S.; Patra, D.; Shankar, H.; Alok Verma, P.

2014-11-01

minimum spanning tree (MST) of a connected, undirected and weighted network is a tree of that network consisting of all its nodes and the sum of weights of all its edges is minimum among all such possible spanning trees of the same network. In this study, we have developed a new GIS tool using most commonly known rudimentary algorithm called Prim's algorithm to construct the minimum spanning tree of a connected, undirected and weighted road network. This algorithm is based on the weight (adjacency) matrix of a weighted network and helps to solve complex network MST problem easily, efficiently and effectively. The selection of the appropriate algorithm is very essential otherwise it will be very hard to get an optimal result. In case of Road Transportation Network, it is very essential to find the optimal results by considering all the necessary points based on cost factor (time or distance). This paper is based on solving the Minimum Spanning Tree (MST) problem of a road network by finding it's minimum span by considering all the important network junction point. GIS technology is usually used to solve the network related problems like the optimal path problem, travelling salesman problem, vehicle routing problems, location-allocation problems etc. Therefore, in this study we have developed a customized GIS tool using Python script in ArcGIS software for the solution of MST problem for a Road Transportation Network of Dehradun city by considering distance and time as the impedance (cost) factors. It has a number of advantages like the users do not need a greater knowledge of the subject as the tool is user-friendly and that allows to access information varied and adapted the needs of the users. This GIS tool for MST can be applied for a nationwide plan called Prime Minister Gram Sadak Yojana in India to provide optimal all weather road connectivity to unconnected villages (points). This tool is also useful for constructing highways or railways spanning several cities optimally or connecting all cities with minimum total road length.

36 CFR 223.82 - Contents of advertisement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... sale which includes specified road construction with total estimated construction costs of $50,000 or more, the advertisement shall also include: (1) The total estimated construction cost of the permanent roads. (2) A statement extending to small business concerns qualified for preferential bidding on timber...

Toll facilities in the United States : bridges, roads, tunnels, ferries

DOT National Transportation Integrated Search

2000-11-01

Nationally, the distribution of speeding-related fatalities changed little across road types from 1995 to 1999. Presented here are three tables showing the following: (1) Totals for Speeding-Related Fatalities by Road Class, 1995-1999; (2) Annual Dis...

Length and area equivalents for interpreting wildland resource maps

Treesearch

Elliot L. Amidon; Marilyn S. Whitfield

1969-01-01

Map users must refer to an appropriate scale in interpreting wildland resource maps. Length and area equivalents for nine map scales commonly used have been computed. For each scale a 1-page table consists of map-to-ground equivalents, buffer strip or road widths, and cell dimensions required for a specified acreage. The conversion factors are stored in a Fortran...

Gravel pit ponds as habitat enhancement for juvenile coho salmon.

Treesearch

M.D. Bryant

1988-01-01

Gravel pits built during road construction in the early 1970's near Yakutat, Alaska, filled with water and were connected to nearby rivers to allow juvenile salmonids to enter. Seasonal changes in population size, length and weight, and length frequencies of the coho salmon population were evaluated over a 2-year period. Numbers of coho salmon fluctuated, but two...

Measurement of the length of pedestrian crossings from image data

NASA Astrophysics Data System (ADS)

Uddin, Mohammad S.; Shioyama, Tadayoshi

2004-10-01

A computer vision based new method for the measurement of the length of pedestrian crossings using a single camera is described. The main objective of this research is to develop a travel aid for the blind people. In a crossing, the usual black road surface is painted with constant width periodic white bands. In Japan, this width is 45 cm. The crossing region as well as its length is detected using this concept. At first, the crossing direction is determined from the power spectrum using fast Fourier transform. The periodic white and black bands are detected using integration along the crossing direction and then differentiation of the integral data perpendicular to crossing. This detection may be erroneous due to adverse effects of the neighboring region of crossing, as the intensity of the whole image is used for bands detection. To remove the neighboring effects, the crossing region is extracted. Then the crossing bands are detected from the image intensity using the crossing region only. Experiment is performed using 32 real road scenes with pedestrian crossing. The rms error is found 2.28 m. The technique determines the crossing length with good accuracy for crossings marked clearly with white paintings as well as fine image resolution.

Spinal Muscular Atrophy

MedlinePlus

... length SMN protein, which is critical for the maintenance of motor neurons. Muscle relaxants such as baclofen, ... Tel: 703-299-1144 Cure SMA 925 Busse Road Elk Grove Village, IL 60007 info@fsma.org ...

a Study of Radial Vibrations of a Rolling Tyre for TYRE-ROAD Noise Characterisation

NASA Astrophysics Data System (ADS)

Périsse, J.

2002-11-01

Because tyre-road noise represents the main noise source for light vehicles with driving speed above 60 km/h, comprehension of generation mechanism of tyre-road noise has become a subject of major importance. In this paper, tyre-road interaction and radial tyre vibrations are investigated for tyre-road noise characterisation. Experimental measurements are performed on a rolling smooth tyre with test laboratory facilities. Both tread band and sidewall responses of the tyre are measured and compared to each other. High concentration of vibrations is observed in the vicinity of the contact area. Stationary radial deformation and non-stationary vibrations due to road rugosity are studied. Frequency analyses have been performed on the acceleration time signals showing the influence of the rotating speed on the vibrations level and frequency content. Finally, by integrating acceleration signal of the tyre tread over one revolution, stationary radial displacement can be calculated and the true contact length can be estimated. This study provides us with new measurement data for comparison with mathematical modelling. It also gives a physical insight on generation mechanism of tyre radial vibrations.

How far to the nearest road?

Treesearch

Kurt H. Riitters; James D. Wickham

2003-01-01

Ecological impacts from roads may be the rule rather than the exception in most of the conterminous United States. We measured the proportion of land area that was located within nine distances from the nearest road of any type, and mapped the results for 164 ecoregions and 2108 watersheds nationwide. Overall, 20% of the total land area was within 127 m of a road, and...

Multiuse trail intersection safety analysis: A crowdsourced data perspective.

PubMed

Jestico, Ben; Nelson, Trisalyn A; Potter, Jason; Winters, Meghan

2017-06-01

Real and perceived concerns about cycling safety are a barrier to increased ridership in many cities. Many people prefer to bike on facilities separated from motor vehicles, such as multiuse trails. However, due to underreporting, cities lack data on bike collisions, especially along greenways and multiuse paths. We used a crowdsourced cycling incident dataset (2005-2016) from BikeMaps.org for the Capital Regional District (CRD), BC, Canada. Our goal was to identify design characteristics associated with unsafe intersections between multiuse trails and roads. 92.8% of mapped incidents occurred between 2014 and 2016. We extracted both collision and near miss incidents at intersections from BikeMaps.org. We conducted site observations at 32 intersections where a major multiuse trail intersected with roads. We compared attributes of reported incidents at multiuse trail-road intersections to those at road-road intersections. We then used negative binomial regression to model the relationship between the number of incidents and the infrastructure characteristics at multiuse trail-road intersections. We found a higher proportion of collisions (38%, or 17/45 total reports) at multiuse trail-road intersections compared to road-road intersections (23%, or 62/268 total reports). A higher proportion of incidents resulted in an injury at multiuse trail-road intersections compared to road-road intersections (33% versus 15%). Cycling volumes, vehicle volumes, and trail sight distance were all associated with incident frequency at multiuse trail-road intersections. Supplementing traditional crash records with crowdsourced cycling incident data provides valuable evidence on cycling safety at intersections between multiuse trails and roads, and more generally, when conflicts occur between diverse transportation modes. Copyright © 2017. Published by Elsevier Ltd.

Speciation distribution and mass balance of copper and zinc in urban rain, sediments, and road runoff.

PubMed

Zuo, Xiaojun; Fu, Dafang; Li, He

2012-11-01

Heavy metal pollution in road runoff had caused widespread concern since the last century. However, there are little references on metal speciation in multiple environmental media (e.g., rain, road sediments, and road runoff). Our research targeted the investigation of metal speciation in rain, road sediments, and runoff; the analysis of speciation variation and mass balance of metals among rain, road sediments, and runoff; the selection of main factors by principal component analysis (PCA); and the establishment of equation to evaluate the impact of rain and road sediments to metals in road runoff. Sequential extraction procedure contains five steps for the chemical fractionation of metals. Flame atomic absorption spectrometry (Shimadzu, AA-6800) was used to determine metal speciation concentration, as well as the total and dissolved fractions. The dissolved fractions for both Cu and Zn were dominant in rain. The speciation distribution of Zn was different from that of Cu in road sediments, while speciation distribution of Zn is similar to that of Cu in runoff. The bound to carbonates for both Cu and Zn in road sediments were prone to be dissolved by rain. The levels of Cu and Zn in runoff were not obviously influenced by rain, but significantly influenced by road sediments. The masses for both Cu and Zn among rain, road sediments, and road runoff approximately meet the mass balance equation for all rainfall patterns. Five principal factors were selected for metal regression equation based on PCA, including rainfall, average rainfall intensity, antecedent dry periods, total suspended particles, and temperature. The established regression equations could be used to predict the effect of road runoff on receiving environments.

43 CFR 5461.2 - Required payment schedule.

Code of Federal Regulations, 2013 CFR

2013-10-01

... officer signs the contract. A purchaser cannot apply any portion of the first installment to cover other payments due on the contract until either 60 percent of the total purchase price has been paid or road... of the total purchase price. The value of satisfactorily completed road construction required by the...

43 CFR 5461.2 - Required payment schedule.

Code of Federal Regulations, 2011 CFR

2011-10-01

... officer signs the contract. A purchaser cannot apply any portion of the first installment to cover other payments due on the contract until either 60 percent of the total purchase price has been paid or road... of the total purchase price. The value of satisfactorily completed road construction required by the...

43 CFR 5461.2 - Required payment schedule.

Code of Federal Regulations, 2012 CFR

2012-10-01

... officer signs the contract. A purchaser cannot apply any portion of the first installment to cover other payments due on the contract until either 60 percent of the total purchase price has been paid or road... of the total purchase price. The value of satisfactorily completed road construction required by the...

43 CFR 5461.2 - Required payment schedule.

Code of Federal Regulations, 2014 CFR

2014-10-01

... officer signs the contract. A purchaser cannot apply any portion of the first installment to cover other payments due on the contract until either 60 percent of the total purchase price has been paid or road... of the total purchase price. The value of satisfactorily completed road construction required by the...

Impact analysis of two kinds of failure strategies in Beijing road transportation network

NASA Astrophysics Data System (ADS)

Zhang, Zundong; Xu, Xiaoyang; Zhang, Zhaoran; Zhou, Huijuan

The Beijing road transportation network (BRTN), as a large-scale technological network, exhibits very complex and complicate features during daily periods. And it has been widely highlighted that how statistical characteristics (i.e. average path length and global network efficiency) change while the network evolves. In this paper, by using different modeling concepts, three kinds of network models of BRTN namely the abstract network model, the static network model with road mileage as weights and the dynamic network model with travel time as weights — are constructed, respectively, according to the topological data and the real detected flow data. The degree distribution of the three kinds of network models are analyzed, which proves that the urban road infrastructure network and the dynamic network behavior like scale-free networks. By analyzing and comparing the important statistical characteristics of three models under random attacks and intentional attacks, it shows that the urban road infrastructure network and the dynamic network of BRTN are both robust and vulnerable.

Driver steering dynamics measured in car simulator under a range of visibility and roadmaking conditions

NASA Technical Reports Server (NTRS)

Allen, R. W.; Mcruer, D. T.

1977-01-01

A simulation experiment was conducted to determine the effect of reduced visibility on driver lateral (steering) control. The simulator included a real car cab and a single lane road image projected on a screen six feet in front of the driver. Simulated equations of motion controlled apparent car lane position in response to driver steering actions, wind gusts, and road curvature. Six drivers experienced a range of visibility conditions at various speeds with assorted roadmaking configurations (mark and gap lengths). Driver describing functions were measured and detailed parametric model fits were determined. A pursuit model employing a road curvature feedforward was very effective in explaining driver behavior in following randomly curving roads. Sampled-data concepts were also effective in explaining the combined effects of reduced visibility and intermittent road markings on the driver's dynamic time delay. The results indicate the relative importance of various perceptual variables as the visual input to the driver's steering control process is changed.

HOW FAR TO THE NEAREST ROAD?

EPA Science Inventory

Ecological impacts from roads may be the rule rather than the exception in most watersheds of the conterminous United States. We measured total area, and forestland area located within nine distances of the nearest road of any type in each of 2,108 watersheds nationwide. Overall,...

An eco-efficient and economical optimum evaluation technique for the forest road networks: the case of the mountainous forest of Metsovo, Greece.

PubMed

Tampekis, Stergios; Samara, Fani; Sakellariou, Stavros; Sfougaris, Athanassios; Christopoulou, Olga

2018-02-12

The sustainable forest management can be achieved only through environmentally sound and economically efficient and feasible forest road networks and transportation systems that can potentially improve the multi-functional use of forest resources. However, road network planning and construction suggest long-term finance that require a capital investment (cash outflow), which would be equal to the value of the total revenue flow (cash inflow) over the whole lifecycle project. This paper emphasizes in an eco-efficient and economical optimum evaluation method for the forest road networks in the mountainous forest of Metsovo, Greece. More specifically, with the use of this technique, we evaluated the forest roads' (a) total construction costs, (b) annual maintenance cost, and (c) log skidding cost. In addition, we estimated the total economic value of forest goods and services that are lost from the forest roads' construction. Finally, we assessed the optimum eco-efficient and economical forest roads densities based on linear equations that stem from the internal rate of return method (IRR) and have been presented graphically. Data analysis and its presentation are achieved with the contribution of geographic information systems (GIS). The technique which is described in this study can be for the decision makers an attractive and useful implement in order to select the most eco-friendly and economical optimum solution to plan forest road network or to evaluate the existing forest transportation systems. Hence, with the use of this method, we can combine not only the multi-objective utilization of natural resources but also the environmental protection of forest ecosystems.

South approach, looking north. The galvanized piping extends from the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

South approach, looking north. The galvanized piping extends from the abutments across the length of the arch. - Weaverland Bridge, Quarry Road spanning Conestoga Creek, Terre Hill, Lancaster County, PA

Computerized Maze Navigation and On-Road Performance by Drivers With Dementia

PubMed Central

Ott, Brian R.; Festa, Elena K.; Amick, Melissa M.; Grace, Janet; Davis, Jennifer D.; Heindel, William C.

2012-01-01

This study examined the ability of computerized maze test performance to predict the road test performance of cognitively impaired and normal older drivers. The authors examined 133 older drivers, including 65 with probable Alzheimer disease, 23 with possible Alzheimer disease, and 45 control subjects without cognitive impairment. Subjects completed 5 computerized maze tasks employing a touch screen and pointer as well as a battery of standard neuropsychological tests. Parameters measured for mazes included errors, planning time, drawing time, and total time. Within 2 weeks, subjects were examined by a professional driving instructor on a standardized road test modeled after the Washington University Road Test. Road test total score was significantly correlated with total time across the 5 mazes. This maze score was significant for both Alzheimer disease subjects and control subjects. One maze in particular, requiring less than 2 minutes to complete, was highly correlated with driving performance. For the standard neuropsychological tests, highest correlations were seen with Trail Making A (TrailsA) and the Hopkins Verbal Learning Tests Trial 1 (HVLT1). Multiple regression models for road test score using stepwise subtraction of maze and neuropsychological test variables revealed significant independent contributions for total maze time, HVLT1, and TrailsA for the entire group; total maze time and HVLT1 for Alzheimer disease subjects; and TrailsA for normal subjects. As a visual analog of driving, a brief computerized test of maze navigation time compares well to standard neuropsychological tests of psychomotor speed, scanning, attention, and working memory as a predictor of driving performance by persons with early Alzheimer disease and normal elders. Measurement of maze task performance appears to be useful in the assessment of older drivers at risk for hazardous driving. PMID:18287166

Evaluation of wide edgelines on two-lane rural roads : final report.

DOT National Transportation Integrated Search

1987-01-01

The effect of 8-in. wide edgelines on the incidence of run-off-the road (ROR) and related accidents was evaluated. The treatment locations consisted of three two-lane rural road sections totaling 55.2 miles. A before-and-after design with a compariso...

Pavement Condition Assessment Using IRI from Roadroid and Surface Distress Index Method on National Road in Sumenep Regency

NASA Astrophysics Data System (ADS)

Arianto, T.; Suprapto, M.; Syafi’i

2018-03-01

The pavement condition will decrease due to the influence of traffic and environment, so that the maintenance effort is needed to maintain the road condition during the service period. In order to carry out road maintenance activities right on target, there needs to be a plan based on accurate pavement condition data. Road roughness is the most commonly used condition parameter in evaluating pavement conditions objectively because road roughness data is relatively easy to obtain, well correlated with vehicle operating costs and the most relevant parameter in road functional performance measurement. The Roadroid is an Android-based application that measures road roughness by using vibration sensors on a smartphone so it is possible to get an International Roughness Index (IRI) value as an indicator of pavement conditions more easily and efficiently. Besides based on road roughness, pavement condition evaluation can also be done visually by using Surface Distress Index (SDI) method that uses the total crack area parameters, average crack width, total number of potholes and the average depth of rutting. This study attempts to assess the condition of Jenderal Sudirman-Kalianget road by combining IRI Roadroid value and SDI value which will be used as the basis to determine the required road maintenance. This road segment is one of the national strategic road connecting the center of Sumenep regency with the Kalianget harbor. Based on IRI measurement and SDI calculation, the pavement condition of Jenderal Sudirman-Kalianget road can be described 4.2 kilometers (37.17%) were good and 2.3 kilometers (20.35%) were fair that need routine maintenance. While 2.1 kilometers (18.58%) were bad and 2.7 kilometers (23.89%) were poor that need periodical maintenance and reconstruction.

The impact of logging roads on dung beetle assemblages in a tropical rainforest reserve.

PubMed

Edwards, Felicity A; Finan, Jessica; Graham, Lucy K; Larsen, Trond H; Wilcove, David S; Hsu, Wayne W; Chey, V K; Hamer, Keith C

2017-01-01

The demand for timber products is facilitating the degradation and opening up of large areas of intact habitats rich in biodiversity. Logging creates an extensive network of access roads within the forest, yet these are commonly ignored or excluded when assessing impacts of logging on forest biodiversity. Here we determine the impact of these roads on the overall condition of selectively logged forests in Borneo, Southeast Asia. Focusing on dung beetles along > 40 km logging roads we determine: (i) the magnitude and extent of edge effects alongside logging roads; (ii) whether vegetation characteristics can explain patterns in dung beetle communities, and; (iii) how the inclusion of road edge forest impacts dung beetle assemblages within the overall logged landscape. We found that while vegetation structure was significantly affected up to 34 m from the road edge, impacts on dung beetle communities penetrated much further and were discernible up to 170 m into the forest interior. We found larger species and particularly tunnelling species responded more than other functional groups which were also influenced by micro-habitat variation. We provide important new insights into the long-term ecological impacts of tropical logging. We also support calls for improved logging road design both during and after timber extraction to conserve more effectively biodiversity in production forests, for instance, by considering the minimum volume of timber, per unit length of logging road needed to justify road construction. In particular, we suggest that governments and certification bodies need to highlight more clearly the biodiversity and environmental impacts of logging roads.

Sleep Disturbance from Road Traffic, Railways, Airplanes and from Total Environmental Noise Levels in Montreal.

PubMed

Perron, Stéphane; Plante, Céline; Ragettli, Martina S; Kaiser, David J; Goudreau, Sophie; Smargiassi, Audrey

2016-08-11

The objective of our study was to measure the impact of transportation-related noise and total environmental noise on sleep disturbance for the residents of Montreal, Canada. A telephone-based survey on noise-related sleep disturbance among 4336 persons aged 18 years and over was conducted. LNight for each study participant was estimated using a land use regression (LUR) model. Distance of the respondent's residence to the nearest transportation noise source was also used as an indicator of noise exposure. The proportion of the population whose sleep was disturbed by outdoor environmental noise in the past 4 weeks was 12.4%. The proportion of those affected by road traffic, airplane and railway noise was 4.2%, 1.5% and 1.1%, respectively. We observed an increased prevalence in sleep disturbance for those exposed to both rail and road noise when compared for those exposed to road only. We did not observe an increased prevalence in sleep disturbance for those that were both exposed to road and planes when compared to those exposed to road or planes only. We developed regression models to assess the marginal proportion of sleep disturbance as a function of estimated LNight and distance to transportation noise sources. In our models, sleep disturbance increased with proximity to transportation noise sources (railway, airplane and road traffic) and with increasing LNight values. Our study provides a quantitative estimate of the association between total environmental noise levels estimated using an LUR model and sleep disturbance from transportation noise.

The effect of pre-existing health conditions on the cost of recovery from road traffic injury: insights from data linkage of medicare and compensable injury claims in Victoria, Australia.

PubMed

Hassani-Mahmooei, Behrooz; Berecki-Gisolf, Janneke; Hahn, Youjin; McClure, Roderick J

2016-04-29

Comorbidity is known to affect length of hospital stay and mortality after trauma but less is known about its impact on recovery beyond the immediate post-accident care period. The aim of this study was to investigate the role of pre-existing health conditions in the cost of recovery from road traffic injury using health service use records for 1 year before and after the injury. Individuals who claimed Transport Accident Commission (TAC) compensation for a non-catastrophic injury that occurred between 2010 and 2012 in Victoria, Australia and who provided consent for Pharmaceutical Benefits Scheme (PBS) and Medicare Benefits Schedule (MBS) linkage were included (n = 738) in the analysis. PBS and MBS records dating from 12 months prior to injury were provided by the Department of Human Services (Canberra, Australia). Pre-injury use of health service items and pharmaceuticals were considered to indicate pre-existing health condition. Bayesian Model Averaging techniques were used to identify the items that were most strongly correlated with recovery cost. Multivariate regression models were used to determine the impact of these items on the cost of injury recovery in terms of compensated ambulance, hospital, medical, and overall claim cost. Out of the 738 study participants, 688 used at least one medical item (total of 15,625 items) and 427 used at least one pharmaceutical item (total of 9846). The total health service cost of recovery was $10,115,714. The results show that while pre-existing conditions did not have any significant impact on the total cost of recovery, categorical costs were affected: e.g. on average, for every anaesthetic in the year before the accident, hospital cost of recovery increased by 24 % [95 % CI: 13, 36 %] and for each pathological test related to established diabetes, hospital cost increased by $10,407 [5466.78, 15346.28]. For medical costs, each anaesthetic led to $258 higher cost [174.16, 341.16] and every prescription of drugs used in diabetes increased the cost by 8 % [5, 11 %]. Services related to pre-existing conditions, mainly chronic and surgery-related, are likely to increase certain components of cost of recovery after road traffic trauma but pre-existing physical health has little impact on the overall recovery costs.

Impact of road traffic accidents on the elderly.

PubMed

Etehad, H; Yousefzadeh-Chabok, Sh; Davoudi-Kiakalaye, A; Moghadam Dehnadi, A; Hemati, H; Mohtasham-Amiri, Z

2015-01-01

Older adults are a vulnerable road user group with high mortality and morbidity in road crash. The aim of this study was to show pattern of road traffic injuries in this special aging group. In a cross sectional study, pre-hospital emergency system reports, hospital and police records of all motor vehicle collisions injured above 60 years old who were admitted to Pour-Sina hospital from April 2011 to March 2012 were studied. Demographic data, characteristic of road traffic incidents and in-hospital medical profiles were derived. Data were analyzed with SPSS ver. 18. Differences between demographic and injuries situation were calculated by chi square test. A p-value of <0.05 was considered statistically significant. One thousand three-hundred six old injured were admitted during study period that this amount accounted for 8.7% of total road accident injured. Mean age of them was 70.9 ± 6.7 years. Most of them were male (74.7%). 40.5% were pedestrians, 22.1% were car occupants and 19.1% were motorcyclists.76.7% had multiple trauma. Head and neck were the most prevalent regions of injured. Total in-hospital mortality rate was 10.1% that was higher in old elderly pedestrians and motorcyclists in comparison to young elderly (16.1% vs. 7.9%) and other type of victims (ρ<0.000). One thousand three-hundred six old injured were admitted during study period that this amount accounted for 8.7% of total road accident injured. Mean age of them was 70.9 ± 6.7 years. Most of them were male (74.7%). 40.5% were pedestrians, 22.1% were car occupants and 19.1% were motorcyclists.76.7% had multiple trauma. Head and neck were the most prevalent regions of injured. Total in-hospital mortality rate was 10.1% that was higher in old elderly pedestrians and motorcyclists in comparison to young elderly (16.1% vs. 7.9%) and other type of victims (ρ<0.000). High mortality rate of road traffic injuries in this group especially in pedestrians should be taken into consideration and strategies aimed at the road-user safety including periodic medical examination and improvement of road structure and facilities. Copyright © 2015. Published by Elsevier Ireland Ltd.

A crash-prediction model for multilane roads.

PubMed

Caliendo, Ciro; Guida, Maurizio; Parisi, Alessandra

2007-07-01

Considerable research has been carried out in recent years to establish relationships between crashes and traffic flow, geometric infrastructure characteristics and environmental factors for two-lane rural roads. Crash-prediction models focused on multilane rural roads, however, have rarely been investigated. In addition, most research has paid but little attention to the safety effects of variables such as stopping sight distance and pavement surface characteristics. Moreover, the statistical approaches have generally included Poisson and Negative Binomial regression models, whilst Negative Multinomial regression model has been used to a lesser extent. Finally, as far as the authors are aware, prediction models involving all the above-mentioned factors have still not been developed in Italy for multilane roads, such as motorways. Thus, in this paper crash-prediction models for a four-lane median-divided Italian motorway were set up on the basis of accident data observed during a 5-year monitoring period extending between 1999 and 2003. The Poisson, Negative Binomial and Negative Multinomial regression models, applied separately to tangents and curves, were used to model the frequency of accident occurrence. Model parameters were estimated by the Maximum Likelihood Method, and the Generalized Likelihood Ratio Test was applied to detect the significant variables to be included in the model equation. Goodness-of-fit was measured by means of both the explained fraction of total variation and the explained fraction of systematic variation. The Cumulative Residuals Method was also used to test the adequacy of a regression model throughout the range of each variable. The candidate set of explanatory variables was: length (L), curvature (1/R), annual average daily traffic (AADT), sight distance (SD), side friction coefficient (SFC), longitudinal slope (LS) and the presence of a junction (J). Separate prediction models for total crashes and for fatal and injury crashes only were considered. For curves it is shown that significant variables are L, 1/R and AADT, whereas for tangents they are L, AADT and junctions. The effect of rain precipitation was analysed on the basis of hourly rainfall data and assumptions about drying time. It is shown that a wet pavement significantly increases the number of crashes. The models developed in this paper for Italian motorways appear to be useful for many applications such as the detection of critical factors, the estimation of accident reduction due to infrastructure and pavement improvement, and the predictions of accidents counts when comparing different design options. Thus this research may represent a point of reference for engineers in adjusting or designing multilane roads.

Capacity analysis of a bypass of roundabouts

NASA Astrophysics Data System (ADS)

Sedlačik, Ivan; Slabý, Petr

2017-09-01

The capacity of the roads network mainly depends on the capacity of its nodal points - intersections. A connecting branch or a bypass is a lane or lanes inserted between two adjacent branches of a roundabout, providing redirection of vehicles, that would otherwise burden a circular lane. A bypass effect to the capacity of roundabouts, but also other types of level intersections, is undeniable. A connecting branch increases the total capacity of an intersection that takes a part of vehicles performing a manoeuver of the first right turn completely out of an intersection area. Redirecting vehicles reduces delay times at intersections and reduces queues at the entrance to an intersection. Bypasses improve the quality of transport. Limiting for the capacity of bypasses is the point of disconnection from the entrance into the roundabout and the connection point into the exit from the roundabout. Central parts of the bypasses have minimal effects on the capacity. The length of a bypass has to match with the maximum length of a queue of waiting vehicles at a given intensity level. The article deals with analysis of the bypass capacity at the roundabouts.

Impacts of extreme weather events on transport infrastructure in Norway

NASA Astrophysics Data System (ADS)

Frauenfelder, Regula; Solheim, Anders; Isaksen, Ketil; Romstad, Bård; Dyrrdal, Anita V.; Ekseth, Kristine H. H.; Gangstø Skaland, Reidun; Harbitz, Alf; Harbitz, Carl B.; Haugen, Jan E.; Hygen, Hans O.; Haakenstad, Hilde; Jaedicke, Christian; Jónsson, Árni; Klæboe, Ronny; Ludvigsen, Johanna; Meyer, Nele K.; Rauken, Trude; Sverdrup-Thygeson, Kjetil

2016-04-01

With the latest results on expected future increase in air temperature and precipitation changes reported by the Intergovernmental Panel on Climate Change (IPCC), the climate robustness of important infrastructure is of raising concern in Norway, as well as in the rest of Europe. Economic consequences of natural disasters have increased considerably since 1950. In addition to the effect of demographic changes such as population growth, urbanization and more and more concentration of valuable assets, this increase is also related to an augmenting frequency of extreme events, such as storms, flooding, drought, and landslides. This change is also observable in Norway, where the increased frequency of strong precipitation has led to frequent flooding and landslide events during the last 20 years. A number of studies show that climate change causes an increase in both frequency and intensity of several types of extreme weather, especially when it comes to precipitation. Such extreme weather events greatly affect the transport infrastructure, with numerous and long closures of roads and railroads, in addition to damage and repair costs. Frequent closures of railroad and roads lead to delay or failure in delivery of goods, which again may lead to a loss of customers and/or - eventually - markets. Much of the Norwegian transport infrastructure is more than 50 years old and therefore not adequately dimensioned, even for present climatic conditions. In order to assess these problems and challenges posed to the Norwegian transport infrastructure from present-day and future extreme weather events, the project "Impacts of extreme weather events on infrastructure in Norway (InfraRisk)" was performed under the research Council of Norway program 'NORKLIMA', between 2009 and 2013. The main results of the project are: - Moderate to strong precipitation events have become more frequent and more intense in Norway over the last 50 years, and this trend continues throughout the 21st century. The increase, both in total precipitation, and in the frequency and intensity of extreme events, is greatest in the west and southwest, and in parts of northern Norway, areas with the highest present precipitation. - Snowfall will increase due to increased precipitation in cold areas inland and at high elevations. In lower lying parts of the country, and along the coast, more precipitation as rain will replace snowfall. - The frequency of near-zero events, with freeze-thaw cycles, which can trigger rock falls, will decrease due to the generally increased temperatures. - The greatest uncertainties in the weather trends are linked to uncertainties in climate and emission scenarios, and to the downscaling. - More than 30% of the total length of road and railroads in Norway is exposed to snow avalanche and rock fall/slide hazard. As an example, one of the most exposed railroads, Raumabanen, has an annual probability of 1/3 to be hit by snow avalanches. - Total costs of geohazard impact on the road infrastructure (major roads only) were estimated to be roughly 100 mill. NOK per year, of which the costs of road closures comprise 70%. The numbers are unevenly distributed throughout the country, reflecting the topographic and climatic variability in Norway.

[Road Extraction in Remote Sensing Images Based on Spectral and Edge Analysis].

PubMed

Zhao, Wen-zhi; Luo, Li-qun; Guo, Zhou; Yue, Jun; Yu, Xue-ying; Liu, Hui; Wei, Jing

2015-10-01

Roads are typically man-made objects in urban areas. Road extraction from high-resolution images has important applications for urban planning and transportation development. However, due to the confusion of spectral characteristic, it is difficult to distinguish roads from other objects by merely using traditional classification methods that mainly depend on spectral information. Edge is an important feature for the identification of linear objects (e. g. , roads). The distribution patterns of edges vary greatly among different objects. It is crucial to merge edge statistical information into spectral ones. In this study, a new method that combines spectral information and edge statistical features has been proposed. First, edge detection is conducted by using self-adaptive mean-shift algorithm on the panchromatic band, which can greatly reduce pseudo-edges and noise effects. Then, edge statistical features are obtained from the edge statistical model, which measures the length and angle distribution of edges. Finally, by integrating the spectral and edge statistical features, SVM algorithm is used to classify the image and roads are ultimately extracted. A series of experiments are conducted and the results show that the overall accuracy of proposed method is 93% comparing with only 78% overall accuracy of the traditional. The results demonstrate that the proposed method is efficient and valuable for road extraction, especially on high-resolution images.

Annoyance from Road Traffic, Trains, Airplanes and from Total Environmental Noise Levels.

PubMed

Ragettli, Martina S; Goudreau, Sophie; Plante, Céline; Perron, Stéphane; Fournier, Michel; Smargiassi, Audrey

2015-12-29

There is a lack of studies assessing the exposure-response relationship between transportation noise and annoyance in North America. Our aims were to investigate the prevalence of noise annoyance induced by road traffic, trains and airplanes in relation to distance to transportation noise sources, and to total environmental noise levels in Montreal, Canada; annoyance was assessed as noise-induced disturbance. A telephone-based survey among 4336 persons aged >18 years was conducted. Exposure to total environmental noise (A-weighted outdoor noise levels-LAeq24h and day-evening-night equivalent noise levels-Lden) for each study participant was determined using a statistical noise model (land use regression-LUR) that is based on actual outdoor noise measurements. The proportion of the population annoyed by road traffic, airplane and train noise was 20.1%, 13.0% and 6.1%, respectively. As the distance to major roads, railways and the Montreal International Airport increased, the percentage of people disturbed and highly disturbed due to the corresponding traffic noise significantly decreased. When applying the statistical noise model we found a relationship between noise levels and disturbance from road traffic and total environmental noise, with Prevalence Proportion Ratios (PPR) for highly disturbed people of 1.10 (95% CI: 1.07-1.13) and 1.04 (1.02-1.06) per 1 dB(A) Lden, respectively. Our study provides the first comprehensive information on the relationship between transportation noise levels and disturbance in a Canadian city. LUR models are still in development and further studies on transportation noise induced annoyance are consequently needed, especially for sources other than road traffic.

12. VIEW OF CANOPY OVER NORTHWEST LOADING PLATFORM, RUNNING NEARLY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. VIEW OF CANOPY OVER NORTHWEST LOADING PLATFORM, RUNNING NEARLY THE ENTIRE LENGTH OF THE BUILDING - Oakland Army Base, Transit Shed, East of Dunkirk Street & South of Burma Road, Oakland, Alameda County, CA

Hitching a ride: Seed accrual rates on different types of vehicles.

PubMed

Rew, Lisa J; Brummer, Tyler J; Pollnac, Fredric W; Larson, Christian D; Taylor, Kimberley T; Taper, Mark L; Fleming, Joseph D; Balbach, Harold E

2018-01-15

Human activities, from resource extraction to recreation, are increasing global connectivity, especially to less-disturbed and previously inaccessible places. Such activities necessitate road networks and vehicles. Vehicles can transport reproductive plant propagules long distances, thereby increasing the risk of invasive plant species transport and dispersal. Subsequent invasions by less desirable species have significant implications for the future of threatened species and habitats. The goal of this study was to understand vehicle seed accrual by different vehicle types and under different driving conditions, and to evaluate different mitigation strategies. Using studies and experiments at four sites in the western USA we addressed three questions: How many seeds and species accumulate and are transported on vehicles? Does this differ with vehicle type, driving surface, surface conditions, and season? What is our ability to mitigate seed dispersal risk by cleaning vehicles? Our results demonstrated that vehicles accrue plant propagules, and driving surface, surface conditions, and season affect the rate of accrual: on- and off-trail summer seed accrual on all-terrain vehicles was 13 and 3508 seeds km -1 , respectively, and was higher in the fall than in the summer. Early season seed accrual on 4-wheel drive vehicles averaged 7 and 36 seeds km -1 on paved and unpaved roads respectively, under dry conditions. Furthermore, seed accrual on unpaved roads differed by vehicle type, with tracked vehicles accruing more than small and large 4-wheel drives; and small 4-wheel drives more than large. Rates were dramatically increased under wet surface conditions. Vehicles indiscriminately accrue a wide diversity of seeds (different life histories, forms and seed lengths); total richness, richness of annuals, biennials, forbs and shrubs, and seed length didn't differ among vehicle types, or additional seed bank samples. Our evaluation of portable vehicle wash units showed that approximately 80% of soil and seed was removed from dirty vehicles. This suggests that interception programs to reduce vehicular seed transportation risk are feasible and should be developed for areas of high conservation value, or where the spread of invasive species is of special concern. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Assessment of radiation exposure from cesium-137 contaminated roads for epidemiological studies in Seoul, Korea.

PubMed

Lee, Yun-Keun; Ju, Young-Su; Lee, Won Jin; Hwang, Seung Sik; Yim, Sang-Hyuk; Yoo, Sang-Chul; Lee, Jieon; Choi, Kyung-Hwa; Burm, Eunae; Ha, Mina

2015-01-01

We aimed to assess the radiation exposure for epidemiologic investigation in residents exposed to radiation from roads that were accidentally found to be contaminated with radioactive cesium-137 ((137)Cs) in Seoul. Using information regarding the frequency and duration of passing via the (137)Cs contaminated roads or residing/working near the roads from the questionnaires that were obtained from 8875 residents and the measured radiation doses reported by the Nuclear Safety and Security Commission, we calculated the total cumulative dose of radiation exposure for each person. Sixty-three percent of the residents who responded to the questionnaire were considered as ever-exposed and 1% of them had a total cumulative dose of more than 10 mSv. The mean (minimum, maximum) duration of radiation exposure was 4.75 years (0.08, 11.98) and the geometric mean (minimum, maximum) of the total cumulative dose was 0.049 mSv (<0.001, 35.35) in the exposed. An individual exposure assessment was performed for an epidemiological study to estimate the health risk among residents living in the vicinity of (137)Cs contaminated roads. The average exposure dose in the exposed people was less than 5% of the current guideline.

Impacts of road deicing salts on the early-life growth and development of a stream salmonid: Salt type matters.

PubMed

Hintz, William D; Relyea, Rick A

2017-04-01

The use of road deicing salts in regions that experience cold winters is increasing the salinity of freshwater ecosystems, which threatens freshwater resources. Yet, the impacts of environmentally relevant road salt concentrations on freshwater organisms are not well understood, particularly in stream ecosystems where salinization is most severe. We tested the impacts of deicing salts-sodium chloride (NaCl), magnesium chloride (MgCl 2 ), and calcium chloride (CaCl 2 )-on the growth and development of newly hatched rainbow trout (Oncorhynchus mykiss). We exposed rainbow trout to a wide range of environmentally relevant chloride concentrations (25, 230, 860, 1500, and 3000 mg Cl -  L -1 ) over an ecologically relevant time period (25 d). We found that the deicing salts studied had distinct effects. MgCl 2 did not affect rainbow trout growth at any concentration. NaCl had no effects at the lowest three concentrations, but rainbow trout length was reduced by 9% and mass by 27% at 3000 mg Cl -  L -1 . CaCl 2 affected rainbow trout growth at 860 mg Cl -  L -1 (5% reduced length; 16% reduced mass) and these effects became larger at higher concentrations (11% reduced length; 31% reduced mass). None of the deicing salts affected rainbow trout development. At sub-lethal and environmentally relevant concentrations, our results do not support the paradigm that MgCl 2 is the most toxic deicing salt to fish, perhaps due to hydration effects on the Mg 2+ cation. Our results do suggest different pathways for lethal and sub-lethal effects of road salts. Scaled to the population level, the reduced growth caused by NaCl and CaCl 2 at critical early-life stages has the potential to negatively affect salmonid recruitment and population dynamics. Our findings have implications for environmental policy and management strategies that aim to reduce the impacts of salinization on freshwater organisms. Copyright © 2017 Elsevier Ltd. All rights reserved.

Uncertainty of OpenStreetMap data for the road network in Cyprus

NASA Astrophysics Data System (ADS)

Demetriou, Demetris

2016-08-01

Volunteered geographic information (VGI) refers to the geographic data compiled and created by individuals which are rendered on the Internet through specific web-based tools for diverse areas of interest. One of the most well-known VGI projects is the OpenStreetMap (OSM) that provides worldwide free geospatial data representing a variety of features. A critical issue for all VGI initiatives is the quality of the information offered. Thus, this report looks into the uncertainty of the OSM dataset for the main road network in Cyprus. The evaluation is based on three basic quality standards, namely positional accuracy, completeness and attribute accuracy. The work has been carried out by employing the Model Builder of ArcGIS which facilitated the comparison between the OSM data and the authoritative data provided by the Public Works Department (PWD). Findings showed that the positional accuracy increases with the hierarchical level of a road, it varies per administrative District and around 70% of the roads have a positional accuracy within 6m compared to the reference dataset. Completeness in terms of road length difference is around 25% for three out of four road categories examined and road name completeness is 100% and around 40% for higher and lower level roads, respectively. Attribute accuracy focusing on road name is very high for all levels of roads. These outputs indicate that OSM data are good enough if they fit for the purpose of use. Furthermore, the study revealed some weaknesses of the methods used for calculating the positional accuracy, suggesting the need for methodological improvements.

Geospatial Estimates of Road Salt Usage Across a Gradient of Urbanizing Watersheds in Southern Ontario:Thesis for Masters in Spatial Analysis (MSA)

NASA Astrophysics Data System (ADS)

Giberson, G. K.; Oswald, C.

2015-12-01

In areas affected by snow, chloride (Cl) salts are widely used as a de-icing agent to improve road conditions. While the improvement in road safety is indisputable, there are environmental consequences to local aquatic ecosystems. In many waterways, Cl concentrations have been increasing since the early 1990s, often exceeding national water quality guidelines. To determine the quantity of Cl that is accumulating in urban and urbanizing watersheds, accurate estimates of road salt usage at the watershed-scale are needed. The complex jurisdictional control over road salt application in southern Ontario lends itself to a geospatial approach for calculating Cl inputs to improve the accuracy of watershed-scale Cl mass balance estimates. This study will develop a geospatial protocol for combining information on road salt applications and road network areas to refine watershed-scale Cl inputs, as well as assess spatiotemporal patterns in road salt application across the southern Ontario study region. The overall objective of this project is to use geospatial methods (predominantly ArcGIS) to develop high-accuracy estimates of road salt usage in urbanizing watersheds in southern Ontario. Specifically, the aims will be to map and summarize the types and areas ("lane-lengths") of roadways in each watershed that have road salt applied to them, to determine the most appropriate source(s) of road salt usage data for each watershed, taking into consideration multiple levels of jurisdiction (e.g. municipal, regional, provincial), to calculate and summarize sub-watershed and watershed-scale road salt usage estimates for multiple years, and to analyze intra-watershed spatiotemporal patterns of road salt usage, especially focusing on impervious surfaces. These analyses will recommend areas of concern exacerbated by high-levels of road salt distribution; recommendations around modifying on-the-ground operations will be the next step in helping to correct these issues.

National and regional analysis of road accidents in Spain.

PubMed

Tolón-Becerra, A; Lastra-Bravo, X; Flores-Parra, I

2013-01-01

In Spain, the absolute fatality figures decreased almost 50 percent between 1998 and 2009. Despite this great effort, road mortality is still of great concern to political authorities. Further progress requires efficient road safety policy based on an optimal set of measures and targets that consider the initial conditions and characteristics in each region. This study attempts to analyze road accidents in Spain and its provinces in time and space during 1998-2009. First, we analyzed daily, monthly, and nationwide (NUTS 0) development of road accidents, the correlation between logarithmic transformations of road accidents and territorial and socioeconomic variables, the causality by simple linear regression of road accidents and territorial and socioeconomic variables, and preliminary frequency by fast Fourier transform. Then we analyzed the annual trend in accidents in the Spanish provinces (NUTS 3) and found a correlation between the logarithmic transformations of the mortality rate, fatalities per fatal accident, and accidents resulting in injuries per inhabitant variables and population, population density, gross domestic product (GDP), length of road network, and area. Finally, causality was analyzed by simple linear regression. The most outstanding results were the negative correlation between mortality rate and population density in Spanish provinces, which has increased over time, and that road accidents in Spain have an approximate periodicity of 57 days. The fast Fourier transform analysis of road accident frequency in Spain was useful in identifying the periodic, harmonic components of accidents and casualties. The periodicity observed both for the period 1998-2009 and by year showed that the highest intensity in road accidents was bimonthly, despite the lower number of accidents and casualties in the spectra of amplitude and power and efforts to reduce the intensity and concentration during off-season travel (summer and December).

Comparative metagenomics approaches to characterize the soil fungal communities of western coastal region, Saudi Arabia

PubMed Central

Fuller, Michael P.

2017-01-01

A total of 145007 reads were obtained from pyrosequencing for all the 4 samples. The total count ranged from 11,301,014 (Mecca old road) to 23,503,512 bp (Thuwal). A total of 460 fungal species belonging to 133 genera, 58 families, 33 orders, 13 classes and 4 phyla was identified across the four sites. The most abundant phylum at all four sites was Ascomycota followed by Basidiomycota. Four phyla (Ascomycota—99.31%, Basidiomycota—0.59%, Chytridiomycota—0.04%, Glomeromycota—0.03%) were detected in Khulais. Except for Glomeromycota, all phyla were detected at Mecca old road (Ascomycota—74.26%, Basidiomycota—25.71%, Chytridiomycota—0.01%) and Thuwal (Ascomycota—99.59%, Basidiomycota—0.40%, Chytridiomycota—0.002%); while only Ascomycota—90.98% and Basidiomycota—9.01% were detected in Asfan road. At the class level, Sordariomycetes was predominantly observed at Asfan road—59.88%, Khulais—68.26% and Thuwal—94.84%; while Pezizomycetes was dominant at Mecca old road—56.01%, was absent at Asfan road. Agaricomycetes was present only at Mecca old road—25.73%; while Tremellomycetes—5.77%, Malasseizomycetes—2.13% and Microbotryomycetes—1.10% were found only at Asfan road. The phylogenetic trees revealed that clear genus level differences are visible across all the four sites, with an overall predominance of Thielavia followed by Madurella, Aspergillus, and Gelasinospora. Chaetomium sp., Aspergillus caespitosus and Aspergillus sp. were found in moderate (Mecca old road and Thuwal) to abundant (Asfan road and Khulais) quantities. Thielavia sp., Thielavia hyalocarpa and Madurella sp. are found in moderate quantities at Khulais and Mecca old road, while in abundant levels at Asfan road and Thuwal. Fusarium equisati and F. oxysporum were detected at Thuwal and Khulais. Sordaria araneosa was present at Khulais, while Malasseiza globosa species was detected in moderate quantities across all sites except Khulais. PMID:28934322

Sleep Disturbance from Road Traffic, Railways, Airplanes and from Total Environmental Noise Levels in Montreal

PubMed Central

Perron, Stéphane; Plante, Céline; Ragettli, Martina S.; Kaiser, David J.; Goudreau, Sophie; Smargiassi, Audrey

2016-01-01

The objective of our study was to measure the impact of transportation-related noise and total environmental noise on sleep disturbance for the residents of Montreal, Canada. A telephone-based survey on noise-related sleep disturbance among 4336 persons aged 18 years and over was conducted. LNight for each study participant was estimated using a land use regression (LUR) model. Distance of the respondent’s residence to the nearest transportation noise source was also used as an indicator of noise exposure. The proportion of the population whose sleep was disturbed by outdoor environmental noise in the past 4 weeks was 12.4%. The proportion of those affected by road traffic, airplane and railway noise was 4.2%, 1.5% and 1.1%, respectively. We observed an increased prevalence in sleep disturbance for those exposed to both rail and road noise when compared for those exposed to road only. We did not observe an increased prevalence in sleep disturbance for those that were both exposed to road and planes when compared to those exposed to road or planes only. We developed regression models to assess the marginal proportion of sleep disturbance as a function of estimated LNight and distance to transportation noise sources. In our models, sleep disturbance increased with proximity to transportation noise sources (railway, airplane and road traffic) and with increasing LNight values. Our study provides a quantitative estimate of the association between total environmental noise levels estimated using an LUR model and sleep disturbance from transportation noise. PMID:27529260

Transportation impacts of smart growth development in Maine.

DOT National Transportation Integrated Search

2009-08-01

This study evaluates the reductions in average trip lengths, daily vehicle miles traveled : (VMT), and daily greenhouse gas (GHG) emissions from on-road automobiles due to smart : growth development strategies in two Maine towns, Lisbon in Androscogg...

Trajectory generation for an on-road autonomous vehicle

NASA Astrophysics Data System (ADS)

Horst, John; Barbera, Anthony

2006-05-01

We describe an algorithm that generates a smooth trajectory (position, velocity, and acceleration at uniformly sampled instants of time) for a car-like vehicle autonomously navigating within the constraints of lanes in a road. The technique models both vehicle paths and lane segments as straight line segments and circular arcs for mathematical simplicity and elegance, which we contrast with cubic spline approaches. We develop the path in an idealized space, warp the path into real space and compute path length, generate a one-dimensional trajectory along the path length that achieves target speeds and positions, and finally, warp, translate, and rotate the one-dimensional trajectory points onto the path in real space. The algorithm moves a vehicle in lane safely and efficiently within speed and acceleration maximums. The algorithm functions in the context of other autonomous driving functions within a carefully designed vehicle control hierarchy.

Partial and Total Annoyance Due to Road Traffic Noise Combined with Aircraft or Railway Noise: Structural Equation Analysis.

PubMed

Gille, Laure-Anne; Marquis-Favre, Catherine; Lam, Kin-Che

2017-11-30

Structural equation modeling was used to analyze partial and total in situ annoyance in combined transportation noise situations. A psychophysical total annoyance model and a perceptual total annoyance model were proposed. Results show a high contribution of Noise exposure and Noise sensitivity to Noise annoyance , as well as a causal relationship between noise annoyance and lower Dwelling satisfaction. Moreover, the Visibility of noise source may increase noise annoyance, even when the visible noise source is different from the annoying source under study. With regards to total annoyance due to road traffic noise combined with railway or aircraft noise, even though in both situations road traffic noise may be considered background noise and the other noise source event noise, the contribution of road traffic noise to the models is greater than railway noise and smaller than aircraft noise. This finding may be explained by the difference in sound pressure levels between these two types of combined exposures or by the aircraft noise level, which may also indicate the city in which the respondents live. Finally, the results highlight the importance of sample size and variable distribution in the database, as different results can be observed depending on the sample or variables considered.

Partial and Total Annoyance Due to Road Traffic Noise Combined with Aircraft or Railway Noise: Structural Equation Analysis

PubMed Central

Gille, Laure-Anne; Marquis-Favre, Catherine; Lam, Kin-Che

2017-01-01

Structural equation modeling was used to analyze partial and total in situ annoyance in combined transportation noise situations. A psychophysical total annoyance model and a perceptual total annoyance model were proposed. Results show a high contribution of Noise exposure and Noise sensitivity to Noise annoyance, as well as a causal relationship between noise annoyance and lower Dwelling satisfaction. Moreover, the Visibility of noise source may increase noise annoyance, even when the visible noise source is different from the annoying source under study. With regards to total annoyance due to road traffic noise combined with railway or aircraft noise, even though in both situations road traffic noise may be considered background noise and the other noise source event noise, the contribution of road traffic noise to the models is greater than railway noise and smaller than aircraft noise. This finding may be explained by the difference in sound pressure levels between these two types of combined exposures or by the aircraft noise level, which may also indicate the city in which the respondents live. Finally, the results highlight the importance of sample size and variable distribution in the database, as different results can be observed depending on the sample or variables considered. PMID:29189751

Impact of freeway weaving segment design on light-duty vehicle exhaust emissions.

PubMed

Li, Qing; Qiao, Fengxiang; Yu, Lei; Chen, Shuyan; Li, Tiezhu

2018-06-01

In the United States, 26% of greenhouse gas emissions is emitted from the transportation sector; these emisssions meanwhile are accompanied by enormous toxic emissions to humans, such as carbon monoxide (CO), nitrogen oxides (NO x ), and hydrocarbon (HC), approximately 2.5% and 2.44% of a total exhaust emissions for a petrol and a diesel engine, respectively. These exhaust emissions are typically subject to vehicles' intermittent operations, such as hard acceleration and hard braking. In practice, drivers are inclined to operate intermittently while driving through a weaving segment, due to complex vehicle maneuvering for weaving. As a result, the exhaust emissions within a weaving segment ought to vary from those on a basic segment. However, existing emission models usually rely on vehicle operation information, and compute a generalized emission result, regardless of road configuration. This research proposes to explore the impacts of weaving segment configuration on vehicle emissions, identify important predictors for emission estimations, and develop a nonlinear normalized emission factor (NEF) model for weaving segments. An on-board emission test was conducted on 12 subjects on State Highway 288 in Houston, Texas. Vehicles' activity information, road conditions, and real-time exhaust emissions were collected by on-board diagnosis (OBD), a smartphone-based roughness app, and a portable emission measurement system (PEMS), respectively. Five feature selection algorithms were used to identify the important predictors for the response of NEF and the modeling algorithm. The predictive power of four algorithm-based emission models was tested by 10-fold cross-validation. Results showed that emissions are also susceptible to the type and length of a weaving segment. Bagged decision tree algorithm was chosen to develop a 50-grown-tree NEF model, which provided a validation error of 0.0051. The estimated NEFs are highly correlated with the observed NEFs in the training data set as well as in the validation data set, with the R values of 0.91 and 0.90, respectively. Existing emission models usually rely on vehicle operation information to compute a generalized emission result, regardless of road configuration. In practice, while driving through a weaving segment, drivers are inclined to perform erratic maneuvers, such as hard braking and hard acceleration due to the complex weaving maneuver required. As a result, the exhaust emissions within a weaving segment vary from those on a basic segment. This research proposes to involve road configuration, in terms of the type and length of a weaving segment, in constructing an emission nonlinear model, which significantly improves emission estimations at a microscopic level.

Identification of platinum nanoparticles in road dust leachate by single particle inductively coupled plasma-mass spectrometry.

PubMed

Folens, Karel; Van Acker, Thibaut; Bolea-Fernandez, Eduardo; Cornelis, Geert; Vanhaecke, Frank; Du Laing, Gijs; Rauch, Sebastien

2018-02-15

Elevated platinum (Pt) concentrations are found in road dust as a result of emissions from catalytic converters in vehicles. This study investigates the occurrence of Pt in road dust collected in Ghent (Belgium) and Gothenburg (Sweden). Total Pt contents, determined by tandem ICP-mass spectrometry (ICP-MS/MS), were in the range of 5 to 79ngg -1 , comparable to the Pt content in road dust of other medium-sized cities. Further sample characterization was performed by single particle (sp) ICP-MS following an ultrasonic extraction procedure using stormwater runoff for leaching. The method was found to be suitable for the characterization of Pt nanoparticles in road dust leachates. The extraction was optimized using road dust reference material BCR-723, for which an extraction efficiency of 2.7% was obtained by applying 144kJ of ultrasonic energy. Using this method, between 0.2% and 18% of the Pt present was extracted from road dust samples. spICP-MS analysis revealed that Pt in the leachate is entirely present as nanoparticles of sizes between 9 and 21nm. Although representing only a minor fraction of the total content in road dust, the nanoparticulate Pt leachate is most susceptible to biological uptake and hence most relevant in terms of bioavailability. Copyright © 2017 Elsevier B.V. All rights reserved.

Annoyance from Road Traffic, Trains, Airplanes and from Total Environmental Noise Levels

PubMed Central

Ragettli, Martina S.; Goudreau, Sophie; Plante, Céline; Perron, Stéphane; Fournier, Michel; Smargiassi, Audrey

2015-01-01

There is a lack of studies assessing the exposure-response relationship between transportation noise and annoyance in North America. Our aims were to investigate the prevalence of noise annoyance induced by road traffic, trains and airplanes in relation to distance to transportation noise sources, and to total environmental noise levels in Montreal, Canada; annoyance was assessed as noise-induced disturbance. A telephone-based survey among 4336 persons aged >18 years was conducted. Exposure to total environmental noise (A-weighted outdoor noise levels—LAeq24h and day-evening-night equivalent noise levels—Lden) for each study participant was determined using a statistical noise model (land use regression—LUR) that is based on actual outdoor noise measurements. The proportion of the population annoyed by road traffic, airplane and train noise was 20.1%, 13.0% and 6.1%, respectively. As the distance to major roads, railways and the Montreal International Airport increased, the percentage of people disturbed and highly disturbed due to the corresponding traffic noise significantly decreased. When applying the statistical noise model we found a relationship between noise levels and disturbance from road traffic and total environmental noise, with Prevalence Proportion Ratios (PPR) for highly disturbed people of 1.10 (95% CI: 1.07–1.13) and 1.04 (1.02–1.06) per 1 dB(A) Lden, respectively. Our study provides the first comprehensive information on the relationship between transportation noise levels and disturbance in a Canadian city. LUR models are still in development and further studies on transportation noise induced annoyance are consequently needed, especially for sources other than road traffic. PMID:26729143

Long-term trends in California mobile source emissions and ambient concentrations of black carbon and organic aerosol.

PubMed

McDonald, Brian C; Goldstein, Allen H; Harley, Robert A

2015-04-21

A fuel-based approach is used to assess long-term trends (1970-2010) in mobile source emissions of black carbon (BC) and organic aerosol (OA, including both primary emissions and secondary formation). The main focus of this analysis is the Los Angeles Basin, where a long record of measurements is available to infer trends in ambient concentrations of BC and organic carbon (OC), with OC used here as a proxy for OA. Mobile source emissions and ambient concentrations have decreased similarly, reflecting the importance of on- and off-road engines as sources of BC and OA in urban areas. In 1970, the on-road sector accounted for ∼90% of total mobile source emissions of BC and OA (primary + secondary). Over time, as on-road engine emissions have been controlled, the relative importance of off-road sources has grown. By 2010, off-road engines were estimated to account for 37 ± 20% and 45 ± 16% of total mobile source contributions to BC and OA, respectively, in the Los Angeles area. This study highlights both the success of efforts to control on-road emission sources, and the importance of considering off-road engine and other VOC source contributions when assessing long-term emission and ambient air quality trends.

Evaluation of safety ratings of roads based on frontal crashes with known crash pulse and injury outcome.

PubMed

Stigson, H

2009-06-01

The objective in this study, using data from crashed cars fitted with on-board crash pulse recorders, was to present differences in average crash severity, distribution of crash severity, and injury outcomes, based on an independent safety rating of roads, also taking road type and speed limit into consideration. Furthermore, the objective was to evaluate differences in injury risk, based on the distribution of crash severity. The investigation included both frontal two-vehicle crashes and single-vehicle crashes with known injury outcome. In total, 209 real-world crashes involving cars fitted with crash pulse recorders were included. For all crashes, average mean acceleration and change of velocity of the vehicle acceleration pulse were measured and calculated. All crash spots were classified according to an independent road safety rating program (European Road Assessment Programme Road Protection Score), where the safety quality of roads is rated in relation to posted speed limits. The crash severity and injury outcome in crashes that occurred on roads with good safety ratings were compared with crashes on roads with poor safety ratings. The data were also divided into subcategories according to posted speed limit and road type, to evaluate whether there was a difference in crash severity and injury outcome within the categories. In total, crash severity was statistically significantly lower in crashes occurring on roads with good safety ratings than in crashes occurring on roads with poor safety ratings. It was found that crash severity and injury risk were lower on roads with good safety ratings with a speed limit of above 90 km/h compared with roads with poor safety ratings, irrespective of speed limit. On the other hand, crash severity was higher on roads with good safety ratings with speed limit of 70 km/h than on roads with poor safety ratings with the same speed limit. Though it was found that a higher speed limit resulted in higher crash severity on roads with poor safety ratings, the opposite was found on roads with good safety ratings. The main reason for this was that lanes for traffic traveling in opposite directions were more often separated at higher speeds on roads with good safety ratings. On divided roads with good safety ratings, there were no crashes resulting in crash severity above the level corresponding to a 10 percent risk of sustaining serious or fatal injury. This indicates that one of the most important safety measures is divided roads.

Road rage and road traffic accidents among commercial vehicle drivers in Lahore, Pakistan.

PubMed

Shaikh, M A; Shaikh, I A; Siddiqui, Z

2012-04-01

Road rage and road traffic accidents increase the burden of morbidity and mortality in a population. A cross-sectional survey with convenience sampling was conducted among commercial vehicle drivers in Lahore, Pakistan (n = 901) to record their behaviours/experiences regarding road rage and road traffic accidents. Respondents were asked about incidents of shouting/cursing/rude gestures or threats to physically hurt the person/vehicle, by others or themselves, in the previous 24 hours or 3 months, and their involvement in road traffic accidents in the previous 12 months. Auto-rickshaw drivers were significantly more likely to report various road rage experiences/behaviours and involvement in accidents compared with bus and wagon drivers. A total of 112 respondents (12.4%) reported being involved in a road traffic accident in the previous 12 months but traffic police did not record the accident in 52.7% of cases. The results of this study underline the need to improve road safety in Pakistan.

Urban emissions hotspots: Quantifying vehicle congestion and air pollution using mobile phone GPS data.

PubMed

Gately, Conor K; Hutyra, Lucy R; Peterson, Scott; Sue Wing, Ian

2017-10-01

On-road emissions vary widely on time scales as short as minutes and length scales as short as tens of meters. Detailed data on emissions at these scales are a prerequisite to accurately quantifying ambient pollution concentrations and identifying hotspots of human exposure within urban areas. We construct a highly resolved inventory of hourly fluxes of CO, NO 2 , NO x , PM 2.5 and CO 2 from road vehicles on 280,000 road segments in eastern Massachusetts for the year 2012. Our inventory integrates a large database of hourly vehicle speeds derived from mobile phone and vehicle GPS data with multiple regional datasets of vehicle flows, fleet characteristics, and local meteorology. We quantify the 'excess' emissions from traffic congestion, finding modest congestion enhancement (3-6%) at regional scales, but hundreds of local hotspots with highly elevated annual emissions (up to 75% for individual roadways in key corridors). Congestion-driven reductions in vehicle fuel economy necessitated 'excess' consumption of 113 million gallons of motor fuel, worth ∼ $415M, but this accounted for only 3.5% of the total fuel consumed in Massachusetts, as over 80% of vehicle travel occurs in uncongested conditions. Across our study domain, emissions are highly spatially concentrated, with 70% of pollution originating from only 10% of the roads. The 2011 EPA National Emissions Inventory (NEI) understates our aggregate emissions of NO x , PM 2.5 , and CO 2 by 46%, 38%, and 18%, respectively. However, CO emissions agree within 5% for the two inventories, suggesting that the large biases in NO x and PM 2.5 emissions arise from differences in estimates of diesel vehicle activity. By providing fine-scale information on local emission hotspots and regional emissions patterns, our inventory framework supports targeted traffic interventions, transparent benchmarking, and improvements in overall urban air quality. Copyright © 2017 Elsevier Ltd. All rights reserved.

Design of a rotary for an uncontrolled multi-leg intersection in Chennai, India

NASA Astrophysics Data System (ADS)

Vasantha Kumar, S.; Gulati, Himanshu; Arora, Shivam

2017-11-01

One way to control the traffic at busy intersections is to construct a roundabout or rotary intersection, which is a special type of at-grade intersection, where all converging vehicles are forced to move round a central island in clock-wise direction. The present study aims to design a rotary for an uncontrolled multi leg intersection located in Royapetah in Chennai, India. The intersection has five approach roads with two-way traffic in all the approach roads and there is no signal or traffic police to control the traffic at present and hence experiences traffic chaos during peak hours. In order to design the rotary, it is essential to have the information on traffic volumes coming from the approach roads. For this, a video data collection was carried out for a duration of eight hours from 7.30 am to 11.30 am and from 2.30 pm to 6.30 pm on a typical working day using a handycam from the terrace of an apartment building located near the intersection. During data extraction stage, each 5 min. traffic volume was extracted for all the five classes of vehicles considered and were converted to passenger car units (PCU). The analysis of traffic data showed that during peak hour from 4.45 pm to 5.45 pm, the proportion of weaving traffic, i.e., ratio of sum of crossing streams to the total traffic on the weaving section was found to be 0.81. According to Indian road congress (IRC) guidelines, this proportion can take any value between 0.4 and 1 and in the present study, the calculated value is found to be within the prescribed range. Using the calculated values of average entry width of the rotary and width & length of weaving section, the practical capacity of the rotary was found to be 3020 PCUs which is well above the observed traffic volume of 2665 PCUs.

Assessment of radiation exposure from cesium-137 contaminated roads for epidemiological studies in Seoul, Korea

PubMed Central

Lee, Yun-Keun; Ju, Young-Su; Lee, Won Jin; Hwang, Seung Sik; Yim, Sang-Hyuk; Yoo, Sang-Chul; Lee, Jieon; Choi, Kyung-Hwa; Burm, Eunae; Ha, Mina

2015-01-01

Objectives We aimed to assess the radiation exposure for epidemiologic investigation in residents exposed to radiation from roads that were accidentally found to be contaminated with radioactive cesium-137 (137Cs) in Seoul. Methods Using information regarding the frequency and duration of passing via the 137Cs contaminated roads or residing/working near the roads from the questionnaires that were obtained from 8875 residents and the measured radiation doses reported by the Nuclear Safety and Security Commission, we calculated the total cumulative dose of radiation exposure for each person. Results Sixty-three percent of the residents who responded to the questionnaire were considered as ever-exposed and 1% of them had a total cumulative dose of more than 10 mSv. The mean (minimum, maximum) duration of radiation exposure was 4.75 years (0.08, 11.98) and the geometric mean (minimum, maximum) of the total cumulative dose was 0.049 mSv (<0.001, 35.35) in the exposed. Conclusions An individual exposure assessment was performed for an epidemiological study to estimate the health risk among residents living in the vicinity of 137Cs contaminated roads. The average exposure dose in the exposed people was less than 5% of the current guideline. PMID:26184047

Mortality from road traffic accidents in a rapidly urbanizing Chinese city: A 20-year analysis in Shenzhen, 1994-2013.

PubMed

Xie, Shao-Hua; Wu, Yong-Sheng; Liu, Xiao-Jian; Fu, Ying-Bin; Li, Shan-Shan; Ma, Han-Wu; Zou, Fei; Cheng, Jin-Quan

2016-01-01

This study aimed to describe the trends of motorization and mortality rates from road traffic accidents and examine their associations in a rapidly urbanizing city in China, Shenzhen. Using data from the Shenzhen Deaths Registry between 1994 and 2013, we calculated the annual mortality rates of road traffic accidents, in addition to the age- and sex-specific mortality rates and their annual percentage changes (APCs) for the period of 2000-2013. We also examined the associations between mortality rate of road traffic accidents and traffic growth with Spearman's rank correlation analysis and a log-linear model derived from Smeed's law. A total of 20,196 deaths due to road traffic accidents, including 14,391 (71.3%) male deaths and 5,805 (28.7%) female deaths, were recorded in Shenzhen from 1994 to 2013. The annual mortality rates in terms of deaths per population and deaths per vehicle changed in similar patterns, demonstrating an increase since 1994 and peaking in 1997, followed by a steady decrease thereafter. The decrease in mortality was faster in individuals aged 20 year or older compared to those younger than 20 years. The mortality rates in term of deaths per population were positively correlated with the total number of vehicles per kilometer of road but negatively correlated with the motorization rate in term of vehicles per population. The estimated model for deaths due to road traffic accidents in relation to the total population and the number of registered vehicles was ln (deaths/10,000 vehicles) = -1.902 × ln (vehicles/population) - 1.961. The coefficient was statistically significant (P < .001) and the coefficient of determination was 0.966, indicating a good model fit. We described a generally decreasing trend in the mortality rates of road traffic accidents in a rapidly urbanizing Chinese city based observations in the 20-year period from 1994 to 2013. The decreased mortality rate may be explained by the expansion of road network construction, improved road safety regulations and management, as well as more accessible ambulance services in recent years. Nevertheless, road traffic accidents remain a universal problem of great public health concern in the whole population.

Burden of injury of serious road injuries in six EU countries.

PubMed

Weijermars, Wendy; Bos, Niels; Filtness, Ashleigh; Brown, Laurie; Bauer, Robert; Dupont, Emmanuelle; Martin, Jean Louis; Perez, Katherine; Thomas, Pete

2018-02-01

Information about the burden of (non-fatal) road traffic injury is very useful to further improve road safety policy. Previous studies calculated the burden of injury in individual countries. This paper estimates and compares the burden of non-fatal serious road traffic injuries in six EU countries/regions: Austria, Belgium, England, The Netherlands, the Rhône region in France and Spain. It is a cross-sectional study based on hospital discharge databases. of study are patients hospitalized with MAIS3+ due to road traffic injuries. The burden of injury (expressed in years lived with disability (YLD)) is calculated applying a method that is developed within the INTEGRIS study. The method assigns estimated disability information to the casualties using the EUROCOST injury classification. The average burden per MAIS3+ casualty varies between 2.4 YLD and 3.2 YLD per casualty. About 90% of the total burden of injury of MAIS3+ casualties is due to lifelong consequences that are experienced by 19% to 33% of the MAIS3+ casualties. Head injuries, spinal cord injuries and injuries to the lower extremities are responsible for more than 90% of the total burden of MAIS3+ road traffic injuries. Results per transport mode differ between the countries. Differences between countries are mainly due to differences in age distribution and in the distribution over EUROCOST injury groups of the casualties. The analyses presented in this paper can support further improvement of road safety policy. Countermeasures could for example be focused at reducing skull and brain injuries, spinal cord injuries and injuries to the lower extremities, as these injuries are responsible for more than 90% of the total burden of injury of MAIS3+ casualties. Copyright © 2017 Elsevier Ltd. All rights reserved.

How much time do drivers need to obtain situation awareness? A laboratory-based study of automated driving.

PubMed

Lu, Zhenji; Coster, Xander; de Winter, Joost

2017-04-01

Drivers of automated cars may occasionally need to take back manual control after a period of inattentiveness. At present, it is unknown how long it takes to build up situation awareness of a traffic situation. In this study, 34 participants were presented with animated video clips of traffic situations on a three-lane road, from an egocentric viewpoint on a monitor equipped with eye tracker. Each participant viewed 24 videos of different durations (1, 3, 7, 9, 12, or 20 s). After each video, participants reproduced the end of the video by placing cars in a top-down view, and indicated the relative speeds of the placed cars with respect to the ego-vehicle. Results showed that the longer the video length, the lower the absolute error of the number of placed cars, the lower the total distance error between the placed cars and actual cars, and the lower the geometric difference between the placed cars and the actual cars. These effects appeared to be saturated at video lengths of 7-12 s. The total speed error between placed and actual cars also reduced with video length, but showed no saturation up to 20 s. Glance frequencies to the mirrors decreased with observation time, which is consistent with the notion that participants first estimated the spatial pattern of cars after which they directed their attention to individual cars. In conclusion, observers are able to reproduce the layout of a situation quickly, but the assessment of relative speeds takes 20 s or more. Copyright © 2016 Elsevier Ltd. All rights reserved.

[Risk factors for road traffic injury in agricultural vehicle drivers].

PubMed

Cui, M J; Chen, Y; Li, Y; Hu, J; Zhang, X J

2017-08-20

Objective: To examine the risk factors for road traffic injury in agricultural vehicle drivers. Methods: A total of 103 drivers (who had suffered agricultural vehicle road traffic injury within the past year based on the road traffic injury registrar from the Traffic Management Bureau) who were involved in the annual agricultural vehicle inspection from December 2014 to January 2015 were randomly sampled from the Yixing Agricultural Vehicle Station as the case group for this study. Based on a 1∶2 assignment ratio and matched for sex, age, and education, a total of 206 drivers who had not suffered any agricultural vehicle road traffic injury within the past year were selected as the control group. The general information, vehicle information, driving information, driving behavior, and accident details of the agricultural vehicle drivers were analyzed. Results: The incidence rate of road traffic injury was 7.24% given the 103 agricultural vehicle drivers who had suffered agricultural vehicle road traffic injury in the past year. Univariate logistic regression analysis showed that drinking, debt, pressure, history of car accident, history of drunk driving, smoking and phone use during driving, fatigue driving, and driving with illness were the risk factors for road traffic injury in agricultural vehicle drivers ( OR =2.332, 2.429, 19.778, 5.589, 8.517, 2.125, 3.203, 10.249 and 5.639, respectively) . Multivariate logistic regression analysis also demonstrated that pressure, history of car accident, history of drunk driving, fatigue driving, and driving with illness were the risk factors for road traffic injury in agricultural vehicle drivers ( OR =12.139, 11.184, 6.729, 5.939, and 6.544, respectively) . Conclusion: Pressure, history of car accident, history of drunk driving, fatigue driving, and driving with illness are the major risk factors for road traffic injury in agricultural vehicle drivers.

Differences in Surface Water Quality Draining Four Road Surface Types in the Southern Appalachians

Treesearch

Barton D. Clinton; James M. Vose

2003-01-01

Improved and unimproved roads can be the primary source of stream sediment in forested watersheds. We assessed differences in production of total suspended solids (TSS; ppm) from four road sulfate conditions in a Southern Appalachian watershed: (1) a 2-yr-old paved surface (P), (2) an improved gravel sulfate with controlled drainage and routine maintenance (RG), (3) an...

[Asthma and cyclic neutropenia].

PubMed

Salazar Cabrera, A N; Berrón Pérez, R; Ortega Martell, J A; Onuma Takane, E

1996-01-01

We report a male with history of recurrent infections (recurrent oral aphtous disease [ROAD], middle ear infections and pharyngo amigdalitis) every 3 weeks since he was 7 months old. At the age of 3 years cyclic neutropenia was diagnosed with cyclic fall in the total neutrophil count in blood smear every 21 days and prophylactic antimicrobial therapy was indicated. Episodic events every 3 weeks of acute asthma and allergic rhinitis were detected at the age of 6 years old and specific immunotherapy to Bermuda grass was given during 3 years with markedly improvement in his allergic condition but not in the ROAD. He came back until the age of 16 with episodic acute asthma and ROAD. The total neutrophil count failed to 0 every 21 days and surprisingly the total eosinophil count increased up to 2,000 at the same time, with elevation of serum IgE (412 Ul/mL). Specific immunotherapy to D.pt. and Aller.a. and therapy with timomodulin was indicated. After 3 months we observed clinical improvement in the asthmatic condition and the ROAD disappeared, but the total neutrophil count did not improve. We present this case as a rare association between 2 diseases with probably no etiological relationship but may be physiopatological that could help to understand more the pathogenesis of asthma.

Intelligent Tires Based on Measurement of Tire Deformation

NASA Astrophysics Data System (ADS)

Matsuzaki, Ryosuke; Todoroki, Akira

From a traffic safety point-of-view, there is an urgent need for intelligent tires as a warning system for road conditions, for optimized braking control on poor road surfaces and as a tire fault detection system. Intelligent tires, equipped with sensors for monitoring applied strain, are effective in improving reliability and control systems such as anti-lock braking systems (ABSs). In previous studies, we developed a direct tire deformation or strain measurement system with sufficiently low stiffness and high elongation for practical use, and a wireless communication system between tires and vehicle that operates without a battery. The present study investigates the application of strain data for an optimized braking control and road condition warning system. The relationships between strain sensor outputs and tire mechanical parameters, including braking torque, effective radius and contact patch length, are calculated using finite element analysis. Finally, we suggested the possibility of optimized braking control and road condition warning systems. Optimized braking control can be achieved by keeping the slip ratio constant. The road condition warning would be actuated if the recorded friction coefficient at a certain slip ratio is lower than a ‘safe’ reference value.

Intelligent tires for improved tire safety using wireless strain measurement

NASA Astrophysics Data System (ADS)

Matsuzaki, Ryosuke; Todoroki, Akira

2008-03-01

From a traffic safety point-of-view, there is an urgent need for intelligent tires as a warning system for road conditions, for optimized braking control on poor road surfaces and as a tire fault detection system. Intelligent tires, equipped with sensors for monitoring applied strain, are effective in improving reliability and control systems such as anti-lock braking systems (ABSs). In previous studies, we developed a direct tire deformation or strain measurement system with sufficiently low stiffness and high elongation for practical use, and a wireless communication system between tires and vehicle that operates without a battery. The present study investigates the application of strain data for an optimized braking control and road condition warning system. The relationships between strain sensor outputs and tire mechanical parameters, including braking torque, effective radius and contact patch length, are calculated using finite element analysis. Finally, we suggested the possibility of optimized braking control and road condition warning systems. Optimized braking control can be achieved by keeping the slip ratio constant. The road condition warning would be actuated if the recorded friction coefficient at a certain slip ratio is lower than a 'safe' reference value.

An integrated material metabolism model for stocks of urban road system in Beijing, China.

PubMed

Guo, Zhen; Hu, Dan; Zhang, Fuhua; Huang, Guolong; Xiao, Qiang

2014-02-01

Rapid urbanization has greatly altered the urban metabolism of material and energy. As a significant part of the infrastructure, urban roads are being rapidly developed worldwide. Quantitative analysis of metabolic processes on urban road systems, especially the scale, composition and spatial distribution of their stocks, could help to assess the resource appropriation and potential environmental impacts, as well as improve urban metabolism models. In this paper, an integrated model, which covered all types of roads, intersection structures and ancillary facilities, was built for calculating the material stocks of urban road systems. Based on a bottom-up method, the total stocks were disassembled into a number of stock parts rather than obtained by input-output data, which provided an approach promoting data availability and inner structure understanding. The combination with GIS enabled the model to tackle the complex structures of road networks and avoid double counting. In the case study of Beijing, the following results are shown: 1) The total stocks for the entire road system reached 159 million tons, of which nearly 80% was stored in roads, and 20% in ancillary facilities. 2) Macadam was the largest stock (111 million tons), while stone mastic asphalt, polyurethane plastics, and atactic polypropylene accounted for smaller components of the overall system. 3) The stock per unit area of pedestrian overcrossing was higher than that of the other stock units in the entire system, and its steel stocks reached 0.49 t/m(2), which was 10 times as high as that in interchanges. 4) The high stock areas were mainly distributed in ring-shaped and radial expressways, as well as in major interchanges. 5) Expressways and arterials were excessively emphasized, while minor roads were relatively ignored. However, the variation of cross-sectional thickness in branches and neighborhood roads will have a significant impact on the scale of material stocks in the entire road system. © 2013.

Characterization of urban runoff pollution between dissolved and particulate phases.

PubMed

Wei, Zhang; Simin, Li; Fengbing, Tang

2013-01-01

To develop urban stormwater management effectively, characterization of urban runoff pollution between dissolved and particulate phases was studied by 12 rainfall events monitored for five typical urban catchments. The average event mean concentration (AEMC) of runoff pollutants in different phases was evaluated. The AEMC values of runoff pollutants in different phases from urban roads were higher than the ones from urban roofs. The proportions of total dissolved solids, total dissolved nitrogen, and total dissolved phosphorus in total ones for all the catchments were 26.19%-30.91%, 83.29%-90.51%, and 61.54-68.09%, respectively. During rainfall events, the pollutant concentration at the initial stage of rainfall was high and then sharply decreased to a low value. Affected by catchments characterization and rainfall distribution, the highest concentration of road pollutants might appear in the later period of rainfall. Strong correlations were also found among runoffs pollutants in different phases. Total suspended solid could be considered as a surrogate for particulate matters in both road and roof runoff, while dissolved chemical oxygen demand could be regarded as a surrogate for dissolved matters in roof runoff.

Extending the Service Life of Pavements

NASA Astrophysics Data System (ADS)

Gschwendt, Ivan

2018-03-01

The cost of road construction and expenditures on the maintenance of pavements, i.e., their whole life cost, represents a lot of money. The paper describes a procedure for a pavement management system with degradation models and estimates the length of time for the rehabilitation of an asphalt pavement. Using a theory of pavement mechanics, we calculated the stresses and strains on the layers of two pavement models. High modulus asphalt concrete, an asphalt mix with a high binder content, and an asphalt mix with binder modifications are new road building materials. Prolonging the time for the rehabilitation of pavements is possible.

Total dynamic response of a PSS vehicle negotiating asymmetric road excitations

NASA Astrophysics Data System (ADS)

Zhu, Jian Jun; Khajepour, Amir; Esmailzadeh, Ebrahim

2012-12-01

A planar suspension system (PSS) is a novel automobile suspension system in which an individual spring-damper strut is implemented in both the vertical and longitudinal directions, respectively. The wheels in a vehicle with such a suspension system can move back and forth relative to the chassis. When a PSS vehicle experiences asymmetric road excitations, the relative longitudinal motion of wheels with respect to the chassis in two sides of the same axle are not identical, and thus the two wheels at one axle will not be aligned in the same axis. The total dynamic responses, including those of the bounce, pitch and the roll of the PSS vehicle, to the asymmetric road excitation may exhibit different characteristics from those of a conventional vehicle. This paper presents an investigation into the comprehensive dynamic behaviour of a vehicle with the PSS, in such a road condition, on both the straight and curved roads. The study was carried out using an 18 DOF full-car model incorporating a radial-spring tyre-ground contact model and a 2D tyre-ground dynamic friction model. Results demonstrate that the total dynamic behaviour of a PSS vehicle is generally comparable with that of the conventional vehicle, while PSS exhibits significant improvement in absorbing the impact forces along the longitudinal direction when compared to the conventional suspension system. The PSS vehicle is found to be more stable than the conventional vehicle in terms of the directional performance against the disturbance of the road potholes on a straight line manoeuvre, while exhibiting a very similar handling performance on a curved line.

Effect of road transportation on the serum biochemical parameters of cynomolgus monkeys and beagle dogs.

PubMed

Ochi, Takehiro; Yamada, Azusa; Naganuma, Yuki; Nishina, Noriko; Koyama, Hironari

2016-06-01

To determine the effect of long-distance (approximately 600 km) road transportation on the blood biochemistry of laboratory animals, we investigated the changes in serum biochemical parameters in healthy cynomolgus monkeys and beagle dogs transported by truck from Osaka to Tsukuba, Japan. The concentrations of serum cortisol, total bilirubin and aspartate aminotransferase in monkeys increased during transportation. Serum cortisol and total bilirubin levels in dogs also increased during transportation, but serum triglyceride decreased. Serum parameter values in truck-transported monkeys and dogs returned to baseline levels within two weeks following arrival. Taken together, these results suggest that a two-week acclimation period is the minimum duration required for adaptation following road transportation.

Importance of tread inertia and damping on the tyre/road contact stiffness

NASA Astrophysics Data System (ADS)

Winroth, J.; Andersson, P. B. U.; Kropp, W.

2014-10-01

Predicting tyre/road interaction processes like roughness excitation, stick-slip, stick-snap, wear and traction requires detailed information about the road surface, the tyre dynamics and the local deformation of the tread at the interface. Aspects of inertia and damping when the tread is locally deformed are often neglected in many existing tyre/road interaction models. The objective of this paper is to study how the dynamic features of the tread affect contact forces and contact stiffness during local deformation. This is done by simulating the detailed contact between an elastic layer and a rough road surface using a previously developed numerical time domain contact model. Road roughness on length scales smaller than the discretisation scale is included by the addition of nonlinear contact springs between each pair of contact elements. The dynamic case, with an elastic layer impulse response extending in time, is compared with the case where the corresponding quasi-static response is used. Results highlight the difficulty of estimating a constant contact stiffness as it increases during the indentation process between the elastic layer and the rough road surface. The stiffness-indentation relation additionally depends on how rapidly the contact develops; a faster process gives a stiffer contact. Material properties like loss factor and density also alter the contact development. This work implies that dynamic properties of the local tread deformation may be of importance when simulating contact details during normal tyre/road interaction conditions. There are however indications that the significant effect of damping could approximately be included as an increased stiffness in a quasi-static tread model.

Assessment of water quality, road runoff, and bulk atmospheric deposition, Guanella Pass area, Clear Creek and Park Counties, Colorado, water years 1995-97

USGS Publications Warehouse

Stevens, Michael R.

2001-01-01

The Guanella Pass road, located about 40 miles west of Denver, Colorado, between the towns of Georgetown and Grant, has been designated a scenic byway and is being considered for reconstruction. The purpose of this report is to present an assessment of hydrologic and water-quality conditions in the Guanella Pass area and provide baseline data for evaluation of the effects of the proposed road reconstruction. The data were collected during water years 1995-97 (October 1, 1995, to September 30, 1997).Based on Colorado water-quality standards, current surface-water quality near Guanella Pass road was generally acceptable for specified use classifications of recreation, water supply, agriculture, and aquatic life. Streams had small concentrations of dissolved solids, nutrients, trace elements, and suspended sediment. An exception was upper Geneva Creek, which was acidic and had relatively large concentrations of iron, zinc, and other trace elements related to acid-sulfate weathering. Concentrations of many water-quality constituents, especially particle-related phases and suspended sediment, increased during peak snowmelt and rainstorm events and decreased to prerunoff concentrations at the end of runoff periods. Some dissolved (filtered) trace-element loads in Geneva Creek decreased during rainstorms when total recoverable loads remained generally static or increased, indicating a phase change that might be explained by adsorption of trace elements to suspended sediment during storm runoff.Total recoverable iron and dissolved zinc exceeded Colorado stream-water-quality standards most frequently. Exceedances for iron generally occurred during periods of high suspended-sediment transport in several streams. Zinc standards were exceeded in about one-half the samples collected in Geneva Creek 1.5 miles upstream from Grant.Lake-water quality was generally similar to that of area streams. Nitrogen and phosphorus ratios calculated for Clear and Duck Lakes indicated that phytoplankton in the lakes were probably phosphorus-limited. Measures of trophic status (secchi depth, total phosphorus, and chlorophyll-a) indicated that Duck and Clear Lakes were oligotrophic in 1997.Ground water had relatively low specific conductance (range 24 to 584 microsiemens per centimeter) and did not exceed U.S. Environmental Protection Agency drinking-water standards, except for samples collected from a single well, which exceeded the Proposed Maximum Contaminant Level for uranium.Runoff from the Guanella Pass road enters streams through surface channels connected to culverts and roadside ditches. Fifty-six percent of the total number of culvert and roadside-ditch drainage features on the Guanella Pass road showed evidence of recent surface runoff connection to an adjacent stream. Road runoff is generated during snowmelt and during summer rainstorms.At a road cross-drain culvert monitored continuously for discharge (water years 1996-97), most runoff (77 to 96 percent) was a result of snowmelt, and runoff from the road preceded the basinwide peak streamflow, resulting in sediment and water-quality constituent inputs to the stream when the stream?s capacity for dilution of the road runoff was low. Specific conductance of road-runoff samples ranged from 14 to 468 microsiemens per centimeter. Major-ion composition of some samples indicated effects from deicing salt (sodium chloride) and dust inhibitor (magnesium chloride) applied to sections of the road, but changes in the stream concentrations that might be attributed to the runoff were brief and relatively small.Nutrients were commonly measured in road-runoff samples at larger concentrations than in streamflow. Concentrations of nitrate and ammonia, especially during rainfall-generated road runoff, were more similar to the concentrations in precipitation than to the concentrations in stream water. Concentrations of ammonia plus organic nitrogen (total as N) (range less than 0.2 to 24 milligrams per liter) and t

Road traffic injury on rural roads in Tanzania: measuring the effectiveness of a road safety program.

PubMed

Zimmerman, Karen; Jinadasa, Deepani; Maegga, Bertha; Guerrero, Alejandro

2015-01-01

Road traffic injuries (RTIs) are a major public health burden, especially in low- and middle-income countries. There is limited data on RTIs in low-volume, rural African settings. This study attempted to survey all individuals living in households within 200 m of two low-volume rural roads in Tanzania and to collect data on RTIs. Local communities and users of the Bago to Talawanda road (intervention site) and Kikaro to Mihuga road (control site) were targeted and received an intensive program of road safety measures tailored using the crash characteristics of the baseline sample. Demographic data on all household members were collected, and those individuals who suffered an RTI in the previous 3 months had comprehensive information collected about the crash characteristics and the socioeconomic impact. The follow-up data collection occurred nine months after the baseline data were collected. The majority of crashes that caused an RTI involved a motorcycle (71%) and the majority of victims were male (82%) with an average age of 27. Injuries to the legs (55%) were most common and the average length of time away from normal activity was 27 (±33) days. RTI incidence at the intervention site increased during the course of the study (incidence before vs. incidence after) and was unchanged in the community control (incidence before vs. incidence after). The incidence of RTIs in the low-volume rural setting is unacceptably high and most commonly associated with motorcycles. The change in incidence is unreliable due to logistic restraints of the project and more research is needed to quantify the impact of various RTI prevention strategies in this setting. This study provides insight into road traffic injuries on low-volume rural roads, areas where very little research has been captured. Additionally, it provides a replicable study design for those interested in collecting similar data on low-volume rural roads.

[Influence of traffic restriction on road and construction fugitive dust].

PubMed

Tian, Gang; Li, Gang; Qin, Jian-Ping; Fan, Shou-Bin; Huang, Yu-Hu; Nie, Lei

2009-05-15

By monitoring the road and construction dust fall continuously during the "Good Luck Beijing" sport events, the reduction of road and construction dust fall caused by traffic restriction was studied. The contribution rate of road and construction dust to particulate matter of Beijing atmosphere environment, and the emission ratio of it to total local PM10 emission were analyzed. The results show that the traffic restriction reduces road and construction dust fall significantly. The dust fall average value of ring roads was 0.27 g x (m2 x d)(-1) in the "traffic restriction" period, and the values were 0.81 and 0.59 g x (m2 x d)(-1) 1 month and 7 days before. The dust fall average value of major arterial and minor arterial was 0.21 g x (m2 x d)(-1) in the "traffic restriction" period, and the values were 0.54 and 0.58 g x (m2 x d)(-1) 1 month and 7 days before. The roads emission reduced 60%-70% compared with before traffic restriction. The dust fall average values of civil architecture and utility architecture were 0.61 and 1.06 g x (m2 x d)(-1) in the "traffic restriction" period, and the values were 1.15 and 1.55 g x (m2 x d)(-1) 20 days before. The construction dust reduced 30%-47% compared with 20 days before traffic restriction. Road and construction dust emission are the main source of atmosphere particulate matter in Beijing, and its contribution to ambient PM10 concentration is 21%-36%. PM10 emitted from roads and constructions account for 42%-72% and 30%-51% of local emission while the local PM10 account for 50% and 70% of the total emission.

The injury profile and acute treatment costs of major trauma in older people in New South Wales.

PubMed

Curtis, Kate; Chan, Daniel Leonard; Lam, Mary Kit; Mitchell, Rebecca; King, Kate; Leonard, Liz; D'Amours, Scott; Black, Deborah

2014-12-01

To Describe injury profile and costs of older person trauma in New South Wales; quantify variations with peer group costs; and identify predictors of higher costs. Nine level 1 New South Wales trauma centres provided data on major traumas (aged ≥ 55 years) during 2008-2009 financial year. Trauma register and financial data of each institution were linked. Treatment costs were compared with peer group Australian Refined Diagnostic Related Groups costs, on which hospital funding is based. Variables examined through multivariate analyses. Six thousand two hundred and eighty-nine patients were admitted for trauma. Most common injury mechanism was falls (74.8%) then road trauma (14.9%). Median patient cost was $7044 (Q1-3: $3405-13 930) and total treatment costs $76 694 252. Treatment costs were $5 813 975 above peer group average. Intensive care unit admission, age, injury severity score, length of stay and traumatic brain injury were independent predictors of increased costs. Older person trauma attracts greater costs and length of stay. Cost increases with age and injury severity. Hospital financial information and trauma registry data provides accurate cost information that may inform future funding. © 2013 ACOTA.

Dust emissions from unpaved roads on the Colorado Plateau

NASA Astrophysics Data System (ADS)

Duniway, M.; Flagg, C.; Belnap, J.

2013-12-01

On the Colorado Plateau, elevated levels of aeolian dust have become a major land management and policy concern due to its influence on climate, weather, terrestrial ecosystem dynamics, landscape development and fertility, melting of snow and ice, air quality, and human health. Most desert soil surfaces are stabilized by plants, rocks, and/or physical or biological soil crusts, but once disturbed, sediment production from these surfaces can increase dramatically. Road development and use is a common surface disturbing activity in the region. The extent and density of roads and road networks is rapidly increasing due to continued energy exploration, infrastructure development, and off-highway recreation activities. Though it is well known that unpaved roads produce dust, the relative contribution of dust from existing roads or the implications of future road development to regional dust loading is unknown. To address this need, we have initiated a multifaceted research effort to evaluating dust emissions from unpaved roads regionally. At 34 sites arranged across various road surfaces and soil textures in southeastern Utah, we are: 1) monitoring dust emissions, local wind conditions, and vehicle traffic and 2) evaluating fugitive dust potential using a portable wind tunnel and measuring road characteristics that affect dust production. We will then 3) develop a GIS-based model that integrates results from 1 & 2 to estimate potential dust contributions from current and future scenarios of regional road development. Passive, horizontal sediment traps were installed at three distances downwind from the road edge. One control trap was placed upwind of the samplers to account for local, non-road dust emissions. An electronic vehicle counter and anemometer were also installed at monitoring sites. Dust samples were collected every three months at fixed heights, 15 cm up to 100 cm above the soil surface, from March 2010 to the present. Threshold friction velocities (TFV), the minimum wind velocity required to initiate erosion, and sediment production were also quantified using a portable wind tunnel at monitoring sites. Additionally, numerous characteristics including gravel cover, particle-size distribution, soil compaction, and loose-erodible material were measured on road surfaces at monitoring sites. Preliminary results suggest that roads are an important regional dust source, as emissions from roads are comparable to non-road, rural sources that are being monitored concurrently. While gravel roads produce more dust per day on average, per vehicle emissions are larger on dirt roads. Dust flux decreases with distance from the road edge on all road types, however this decline is less pronounced on dirt roads. Portable wind tunnel results indicate that TFV is consistently lower on dirt versus gravel roads across all soil types. Fugitive dust flux is generally larger and more variable on dirt roads compared to gravel roads. Initial analyses suggest that several easily measurable road surface characteristics can potentially be used to predict both TFV and sediment production, including: total gravel cover, gravel particle-size classes, clay content, and road compaction. The relation between TFV and total gravel cover in particular appears to be non-linear, with TFV increasing rapidly above ~40% gravel cover.

Simulation of partially saturated - saturated flow in the Caspar Creek E-road groundwater system

Treesearch

Jason C. Fisher

2000-01-01

Abstract - Over the past decade, the U.S. Forest Service has monitored the subsurface hillslope flow of the E-road swale. The swale is located in the Caspar Creek watershed near Fort Bragg, California. In hydrologic year 1990 a logging road was built across the middle section of the hillslope followed by a total clearcut of the area during the following year....

Rapid Assessment of Environmental Health Impacts for Policy Support: The Example of Road Transport in New Zealand

PubMed Central

Briggs, David; Mason, Kylie; Borman, Barry

2015-01-01

An integrated environmental health impact assessment of road transport in New Zealand was carried out, using a rapid assessment. The disease and injury burden was assessed from traffic-related accidents, air pollution, noise and physical (in)activity, and impacts attributed back to modal source. In total, road transport was found to be responsible for 650 deaths in 2012 (2.1% of annual mortality): 308 from traffic accidents, 283 as a result of air pollution, and 59 from noise. Together with morbidity, these represent a total burden of disease of 26,610 disability-adjusted life years (DALYs). An estimated 40 deaths and 1874 DALYs were avoided through active transport. Cars are responsible for about 52% of attributable deaths, but heavy goods vehicles (6% of vehicle kilometres travelled, vkt) accounted for 21% of deaths. Motorcycles (1 per cent of vkt) are implicated in nearly 8% of deaths. Overall, impacts of traffic-related air pollution and noise are low compared to other developed countries, but road accident rates are high. Results highlight the need for policies targeted at road accidents, and especially at heavy goods vehicles and motorcycles, along with more general action to reduce the reliance on private road transport. The study also provides a framework for national indicator development. PMID:26703699

Older drivers: On-road and off-road test results.

PubMed

Selander, Helena; Lee, Hoe C; Johansson, Kurt; Falkmer, Torbjörn

2011-07-01

Eighty-five volunteer drivers, 65-85 years old, without cognitive impairments impacting on their driving were examined, in order to investigate driving errors characteristic for older drivers. In addition, any relationships between cognitive off-road and on-road tests results, the latter being the gold standard, were identified. Performance measurements included Trail Making Test (TMT), Nordic Stroke Driver Screening Assessment (NorSDSA), Useful Field of View (UFOV), self-rating driving performance and the two on-road protocols P-Drive and ROA. Some of the older drivers displayed questionable driving behaviour. In total, 21% of the participants failed the on-road assessment. Some of the specific errors were more serious than others. The most common driving errors embraced speed; exceeding the speed limit or not controlling the speed. Correlations with the P-Drive protocol were established for NorSDSA total score (weak), UFOV subtest 2 (weak), and UFOV subtest 3 (moderate). Correlations with the ROA protocol were established for UFOV subtest 2 (weak) and UFOV subtest 3 (weak). P-Drive and self ratings correlated weakly, whereas no correlation between self ratings and the ROA protocol was found. The results suggest that specific problems or errors seen in an older person's driving can actually be "normal driving behaviours". Copyright © 2011 Elsevier Ltd. All rights reserved.

Rapid Assessment of Environmental Health Impacts for Policy Support: The Example of Road Transport in New Zealand.

PubMed

Briggs, David; Mason, Kylie; Borman, Barry

2015-12-22

An integrated environmental health impact assessment of road transport in New Zealand was carried out, using a rapid assessment. The disease and injury burden was assessed from traffic-related accidents, air pollution, noise and physical (in)activity, and impacts attributed back to modal source. In total, road transport was found to be responsible for 650 deaths in 2012 (2.1% of annual mortality): 308 from traffic accidents, 283 as a result of air pollution, and 59 from noise. Together with morbidity, these represent a total burden of disease of 26,610 disability-adjusted life years (DALYs). An estimated 40 deaths and 1874 DALYs were avoided through active transport. Cars are responsible for about 52% of attributable deaths, but heavy goods vehicles (6% of vehicle kilometres travelled, vkt) accounted for 21% of deaths. Motorcycles (1 per cent of vkt) are implicated in nearly 8% of deaths. Overall, impacts of traffic-related air pollution and noise are low compared to other developed countries, but road accident rates are high. Results highlight the need for policies targeted at road accidents, and especially at heavy goods vehicles and motorcycles, along with more general action to reduce the reliance on private road transport. The study also provides a framework for national indicator development.

50 CFR 29.21-2 - Application procedures.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) State of local governments or agencies or instrumentalities thereof except as to rights-of-way... schedule: (A) For linear facilities (e.g., powerlines, pipelines, roads, etc.). Length Payment Less than 5... application includes both linear and nonlinear facilities, payment will be the aggregate of amounts under...

50 CFR 29.21-2 - Application procedures.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) State of local governments or agencies or instrumentalities thereof except as to rights-of-way... schedule: (A) For linear facilities (e.g., powerlines, pipelines, roads, etc.). Length Payment Less than 5... application includes both linear and nonlinear facilities, payment will be the aggregate of amounts under...

78 FR 46117 - National Tunnel Inspection Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-30

... based on roadway enclosure and length: ``Any combination of structures that creates a structure that is... this SNPRM apply to all structures defined as highway tunnels on all public roads, on and off Federal... describes the organizational requirements associated with successful implementation of the proposed NTIS...

Urban snow indicates pollution originating from road traffic.

PubMed

Kuoppamäki, Kirsi; Setälä, Heikki; Rantalainen, Anna-Lea; Kotze, D Johan

2014-12-01

Traffic is a major source of pollutants in cities. In this well-replicated study we analysed a broad array of contaminants in snowpacks along roads of different traffic intensities. The majority of pollutants showed a similar pattern with respect to traffic intensity: pH and conductivity as well as concentrations of PAHs, total suspended solids, phosphorus and most heavy metals were higher next to high intensity roads compared to low intensity roads. These pollutant levels also decreased considerably up to 5 m distance from the roads. Furthermore, apart from nitrogen, these variables increased in concentration from control sites in urban forest patches to road bank sites next to roads of low, intermediate and high traffic intensities. The deposition pattern of various traffic-derived pollutants--whether gaseous or particle-bound--was the same. Such information can be useful for the purposes of managing pollutants in urban areas. Copyright © 2014 Elsevier Ltd. All rights reserved.

Influence of tyre-road contact model on vehicle vibration response

NASA Astrophysics Data System (ADS)

Múčka, Peter; Gagnon, Louis

2015-09-01

The influence of the tyre-road contact model on the simulated vertical vibration response was analysed. Three contact models were compared: tyre-road point contact model, moving averaged profile and tyre-enveloping model. In total, 1600 real asphalt concrete and Portland cement concrete longitudinal road profiles were processed. The linear planar model of automobile with 12 degrees of freedom (DOF) was used. Five vibration responses as the measures of ride comfort, ride safety and dynamic load of cargo were investigated. The results were calculated as a function of vibration response, vehicle velocity, road quality and road surface type. The marked differences in the dynamic tyre forces and the negligible differences in the ride comfort quantities were observed among the tyre-road contact models. The seat acceleration response for three contact models and 331 DOF multibody model of the truck semi-trailer was compared with the measured response for a known profile of test section.

Mediterranean coastal sand dune vegetation: influence of natural and anthropogenic factors.

PubMed

Ciccarelli, Daniela

2014-08-01

The aim of the present work was to assess the conservation status of coastal dune systems in Tuscany (Italy). Emphasis was given to the presence and abundance of plant communities identified as habitat in accordance with the Directive 92/43/EEC. Twenty transects perpendicular to the shoreline were randomly positioned on the whole coastal area (30 km in length) in order to sample the full spectrum of plant communities. Vegetation zonation and relationships with the most frequent disturbance factors in the study area-beach cleaning, coastline erosion, presence of paths and roads, bathing settlements and trampling-were investigated through principal coordinate analysis and canonical correspondence analysis. Natural factors, such as distance from the sea and total length, were also considered. Differences in the conservation status of the sites were found, ranging from the total disappearance of the foredune habitats to the presence of the complete psammophilous (sand-loving) plant communities. Erosion, trampling, and paths were found to be closely correlated with degradation and habitat loss. Furthermore, the overall plant species diversity of dunes was measured with NHDune, a modified version of the Shannon index; while the incidence of invasive taxa was calculated using N, a naturalness index. However, these diversity indices proved to be a weaker bioindicator of ecosystem integrity than habitat composition along transects. A possible strategy for the conservation and management of these coastal areas could be to protect the foredunes from erosion and limit trampling through the installation of footbridges or the use of appropriate fences.

Unsteady wake of a rotating tire

NASA Astrophysics Data System (ADS)

Lombard, Jean-Eloi; Moxey, Dave; Xu, Hui; Sherwin, Spencer; Sherwin Lab Team

2015-11-01

For open wheel race-cars, such as IndyCar and Formula One, the wheels are responsible for 40% of the total drag. For road cars drag associated to the wheels and under-carriage can represent 60% of total drag at highway cruise speeds. Experimental observations have reported two or three pairs of counter rotating vortices, the relative importance of which still remains an open question, that interact to form a complex wake. Traditional RANS based methods are typically not well equipped to deal with such highly unsteady flows which motivates research into more physical, unsteady models. Leveraging a high-fidelity spectral/hp element based method a Large Eddy Simulation is performed to give further insight into unsteady characteristics of the wake. In particular the unsteady nature of both the jetting and top vortex pair is reported as well as the time and length scales associated with the vortex core trajectories. Correlation with experimentally obtained particle image velocimetry is presented. The authors acknowledge support from the United Kingdom Turbulence Consortium (UKTC) as well as from the Engineering and Physical Sciences Research Council (EPSRC) for access to ARCHER UK National Supercomputing Service.

Road and Roadside Feature Extraction Using Imagery and LIDAR Data for Transportation Operation

NASA Astrophysics Data System (ADS)

Ural, S.; Shan, J.; Romero, M. A.; Tarko, A.

2015-03-01

Transportation agencies require up-to-date, reliable, and feasibly acquired information on road geometry and features within proximity to the roads as input for evaluating and prioritizing new or improvement road projects. The information needed for a robust evaluation of road projects includes road centerline, width, and extent together with the average grade, cross-sections, and obstructions near the travelled way. Remote sensing is equipped with a large collection of data and well-established tools for acquiring the information and extracting aforementioned various road features at various levels and scopes. Even with many remote sensing data and methods available for road extraction, transportation operation requires more than the centerlines. Acquiring information that is spatially coherent at the operational level for the entire road system is challenging and needs multiple data sources to be integrated. In the presented study, we established a framework that used data from multiple sources, including one-foot resolution color infrared orthophotos, airborne LiDAR point clouds, and existing spatially non-accurate ancillary road networks. We were able to extract 90.25% of a total of 23.6 miles of road networks together with estimated road width, average grade along the road, and cross sections at specified intervals. Also, we have extracted buildings and vegetation within a predetermined proximity to the extracted road extent. 90.6% of 107 existing buildings were correctly identified with 31% false detection rate.

Emission projections of the transport Sector in China: 2015-2040

NASA Astrophysics Data System (ADS)

Yan, L.

2016-12-01

Driven by the significant growth freight and passenger transport demand, transport sector has become a sector that is largely responsible for increases in emissions of atmospheric pollutants (NOx, CO, HC, PM2.5) in China. Figuring out the emission trend in China's transport sector has great influence on formulating emission reduction measures in the future. In this work, both on-road and off-road transport emissions in China were estimated from 2015 to 2040 for CO, NOx, HC and PM2.5. The projection was conducted based on on the energy consumption structure forecast from IEA (International Energy Agency), the future national average annual distance traveled per vehicle and fuel consumption per distance derived from simulation results of the Fuel Economy and Environmental Impact (FEEI) model. The results show that the ownership of on-road vehicles in China increases rapidly during 2015 to 2030 and then the growth slows down. Finally, the total amount reaches up to 522 million in 2040 in which 84.5% turns out to be light-duty vehicles. Because current control legislations for the transport sector in China will continue to be strengthened in the future, the total emissions of China's transport sector were projected to peak around 2030, due to the improvement of vehicle emission standard and the retirement of old vehicles are the most effective measures. The off-road transport will become the main contributor to emissions from transport sector in China since 2030. This work provides a new perspective to understand emissions from both on-road and off-road transport in China, which can support the achievement of improving air quality promised by the Chinese government. This work provides a new perspective to understand the emission trends of on-road and off-road transport sector in China from 2015 to 2040, which can support the achievement of the air quality goal promised by the Chinese government. Driven by the significant growth freight and passenger transport demand, transport sector has become a sector that is largely responsible for increases in emissions of atmospheric pollutants (NOx, CO, HC, PM2.5) in China. Figuring out the emission trend in China's transport sector has great influence on formulating emission reduction measures in the future. In this work, both on-road and off-road transport emissions in China were estimated from 2015 to 2040 for CO, NOx, HC and PM2.5. The projection was conducted based on on the energy consumption structure forecast from IEA (International Energy Agency), the future national average annual distance traveled per vehicle and fuel consumption per distance derived from simulation results of the Fuel Economy and Environmental Impact (FEEI) model. The results show that the ownership of on-road vehicles in China increases rapidly during 2015 to 2030 and then the growth slows down. Finally, the total amount reaches up to 522 million in 2040 in which 84.5% turns out to be light-duty vehicles. Because current control legislations for the transport sector in China will continue to be strengthened in the future, the total emissions of China's transport sector were projected to peak around 2030, due to the improvement of vehicle emission standard and the retirement of old vehicles are the most effective measures. The off-road transport will become the main contributor to emissions from transport sector in China since 2030. This work provides a new perspective to understand emissions from both on-road and off-road transport in China, which can support the achievement of improving air quality promised by the Chinese government. This work provides a new perspective to understand the emission trends of on-road and off-road transport sector in China from 2015 to 2040, which can support the achievement of the air quality goal promised by the Chinese government.

Spatial regression analysis of traffic crashes in Seoul.

PubMed

Rhee, Kyoung-Ah; Kim, Joon-Ki; Lee, Young-ihn; Ulfarsson, Gudmundur F

2016-06-01

Traffic crashes can be spatially correlated events and the analysis of the distribution of traffic crash frequency requires evaluation of parameters that reflect spatial properties and correlation. Typically this spatial aspect of crash data is not used in everyday practice by planning agencies and this contributes to a gap between research and practice. A database of traffic crashes in Seoul, Korea, in 2010 was developed at the traffic analysis zone (TAZ) level with a number of GIS developed spatial variables. Practical spatial models using available software were estimated. The spatial error model was determined to be better than the spatial lag model and an ordinary least squares baseline regression. A geographically weighted regression model provided useful insights about localization of effects. The results found that an increased length of roads with speed limit below 30 km/h and a higher ratio of residents below age of 15 were correlated with lower traffic crash frequency, while a higher ratio of residents who moved to the TAZ, more vehicle-kilometers traveled, and a greater number of access points with speed limit difference between side roads and mainline above 30 km/h all increased the number of traffic crashes. This suggests, for example, that better control or design for merging lower speed roads with higher speed roads is important. A key result is that the length of bus-only center lanes had the largest effect on increasing traffic crashes. This is important as bus-only center lanes with bus stop islands have been increasingly used to improve transit times. Hence the potential negative safety impacts of such systems need to be studied further and mitigated through improved design of pedestrian access to center bus stop islands. Copyright © 2016 Elsevier Ltd. All rights reserved.

75 FR 11620 - Agency Information Collection Activities: Notice of Request for Extension of Currently Approved...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-11

..., to the extent appropriate, safety, bridge, pavement, and congestion management systems for roads...; Pavement features such as number of lanes, length, width, surface type, functional classification, and shoulder information; and pavement condition information such as roughness, distress, rutting, and surface...

Calibration of the inertial consistency index to assess road safety on horizontal curves of two-lane rural roads.

PubMed

Llopis-Castelló, David; Camacho-Torregrosa, Francisco Javier; García, Alfredo

2018-05-26

One of every four road fatalities occurs on horizontal curves of two-lane rural roads. To this regard, many studies have been undertaken to analyze the crash risk on this road element. Most of them were based on the concept of geometric design consistency, which can be defined as how drivers' expectancies and road behavior relate. However, none of these studies included a variable which represents and estimates drivers' expectancies. This research presents a new local consistency model based on the Inertial Consistency Index (ICI). This consistency parameter is defined as the difference between the inertial operating speed, which represents drivers' expectations, and the operating speed, which represents road behavior. The inertial operating speed was defined as the weighted average operating speed of the preceding road section. In this way, different lengths, periods of time, and weighting distributions were studied to identify how the inertial operating speed should be calculated. As a result, drivers' expectancies should be estimated considering 15 s along the segment and a linear weighting distribution. This was consistent with drivers' expectancies acquirement process, which is closely related to Short-Term Memory. A Safety Performance Function was proposed to predict the number of crashes on a horizontal curve and consistency thresholds were defined based on the ICI. To this regard, the crash rate increased as the ICI increased. Finally, the proposed consistency model was compared with previous models. As a conclusion, the new Inertial Consistency Index allowed a more accurate estimation of the number of crashes and a better assessment of the consistency level on horizontal curves. Therefore, highway engineers have a new tool to identify where road crashes are more likely to occur during the design stage of both new two-lane rural roads and improvements of existing highways. Copyright © 2018 Elsevier Ltd. All rights reserved.

Roads at risk - the impact of debris flows on road network reliability and vulnerability in southern Norway

NASA Astrophysics Data System (ADS)

Meyer, Nele Kristin; Schwanghart, Wolfgang; Korup, Oliver

2014-05-01

Norwegian's road network is frequently affected by debris flows. Both damage repair and traffic interruption generate high economic losses and necessitate a rigorous assessment of where losses are expected to be high and where preventive measures should be focused on. In recent studies, we have developed susceptibility and trigger probability maps that serve as input into a hazard calculation at the scale of first-order watersheds. Here we combine these results with graph theory to assess the impact of debris flows on the road network of southern Norway. Susceptibility and trigger probability are aggregated for individual road sections to form a reliability index that relates to the failure probability of a link that connects two network vertices, e.g., road junctions. We define link vulnerability as a function of traffic volume and additional link failure distance. Additional link failure distance is the extra length of the alternative path connecting the two associated link vertices in case the network link fails and is calculated by a shortest-path algorithm. The product of network reliability and vulnerability indices represent the risk index. High risk indices identify critical links for the Norwegian road network and are investigated in more detail. Scenarios demonstrating the impact of single or multiple debris flow events are run for the most important routes between seven large cities in southern Norway. First results show that the reliability of the road network is lowest in the central and north-western part of the study area. Road network vulnerability is highest in the mountainous regions in central southern Norway where the road density is low and in the vicinity of cities where the traffic volume is large. The scenarios indicate that city connections that have their shortest path via routes crossing the central part of the study area have the highest risk of route failure.

Evaluation of mobile source emission trends in the United States

NASA Astrophysics Data System (ADS)

Dallmann, Timothy R.; Harley, Robert A.

2010-07-01

A fuel-based approach is used to estimate exhaust emissions of nitrogen oxides (NOx) and fine particulate matter (PM2.5) from mobile sources in the United States for the years 1996-2006. Source categories considered include on-road and off-road gasoline and diesel engines. Pollutant emissions for each mobile source category were estimated by combining fuel consumption with emission factors expressed per unit of fuel burned. Over the 10-year time period that is the focus of this study, sales of gasoline and diesel fuel intended for on-road use increased by 15 and 43%, respectively. Diesel fuel use by off-road equipment increased by ˜20% over the same time period. Growth in fuel consumption offset some of the reductions in pollutant emission factors that occurred during this period. For NOx, there have been dramatic (factor of 2) decreases in emission factors for on-road gasoline engines between 1996 and 2006. In contrast, diesel NOx emission factors decreased more gradually. Exhaust PM2.5 emission factors appear to have decreased for most engine categories, but emission uncertainties are large for this pollutant. Diesel engines appear to be the dominant mobile source of both NOx and PM2.5; the diesel share of total NOx has increased over time as gasoline engine emissions have declined. Comparing fuel-based emission estimates with U.S. Environmental Protection Agency's national emission inventory led to the following conclusions: (1) total emissions of NOx and PM2.5 estimated by two different methods were similar, (2) source contributions to these totals differ significantly, with higher relative contributions coming from on-road diesel engines in this study.

The association of road safety knowledge and risk behaviour with paediatric road traffic injury in Guangzhou, China.

PubMed

Dong, Xiaomei; Peek-Asa, Corinne; Yang, Jingzhen; Wang, Shengyong; Chen, Xiongfei; Chi, Guibo; Ramirez, Marizen

2011-02-01

This study describes road traffic injuries among school-aged children in Guangzhou, China, and examines the effect of road safety knowledge and risk behaviours on road traffic injuries. A stratified cluster sample of 3747 children from six primary schools and six middle schools in Guangzhou, China, was surveyed. Data were collected on sociodemographic factors and road traffic injuries during the past year. Knowledge about road safety rules was assessed using a 14-item road safety knowledge index, and risky road safety behaviours were measured using a 25-item road safety behaviour index. A total of 403 (10.8%) students reported having at least one road traffic injury during the past 12 months. A high proportion of injuries was found among children who were boys, in primary school and from the suburbs. Bicycle-related injuries were the most common (46.0% of all injuries). Motor vehicle-related injuries had higher hospitalisation rates and worse psychological impact than bicycle or pedestrian injuries. Children with low and medium road safety knowledge had 1.5 to 3 times the odds of injury compared with students with high road safety knowledge. Students with high scores on the risky road behaviour index had twice the odds of injury (OR 2.04, 95% CI 1.47 to 2.84) compared with students with low scores. Better road safety knowledge and the avoidance of walking or cycling-related risk behaviours are protective factors for road traffic injuries among Chinese school children. More injury prevention programmes are needed to improve road safety knowledge and reduce risk behaviours.

Spatial and temporal disaggregation of transport-related carbon dioxide emissions in Bogota - Colombia

NASA Astrophysics Data System (ADS)

Hernandez-Gonzalez, L. A.; Jimenez Pizarro, R.; Néstor Y. Rojas, N. Y.

2011-12-01

As a result of rapid urbanization during the last 60 years, 75% of the Colombian population now lives in cities. Urban areas are net sources of greenhouse gases (GHG) and contribute significantly to national GHG emission inventories. The development of scientifically-sound GHG mitigation strategies require accurate GHG source and sink estimations. Disaggregated inventories are effective mitigation decision-making tools. The disaggregation process renders detailed information on the distribution of emissions by transport mode, and the resulting a priori emissions map allows for optimal definition of sites for GHG flux monitoring, either by eddy covariance or inverse modeling techniques. Fossil fuel use in transportation is a major source of carbon dioxide (CO2) in Bogota. We present estimates of CO2 emissions from road traffic in Bogota using the Intergovernmental Panel on Climate Change (IPCC) reference method, and a spatial and temporal disaggregation method. Aggregated CO2 emissions from mobile sources were estimated from monthly and annual fossil fuel (gasoline, diesel and compressed natural gas - CNG) consumption statistics, and estimations of bio-ethanol and bio-diesel use. Although bio-fuel CO2 emissions are considered balanced over annual (or multi-annual) agricultural cycles, we included them since CO2 generated by their combustion would be measurable by a net flux monitoring system. For the disaggregation methodology, we used information on Bogota's road network classification, mean travel speed and trip length for each vehicle category and road type. The CO2 emission factors were taken from recent in-road measurements for gasoline- and CNG-powered vehicles and also estimated from COPERT IV. We estimated emission factors for diesel from surveys on average trip length and fuel consumption. Using IPCC's reference method, we estimate Bogota's total transport-related CO2 emissions for 2008 (reference year) at 4.8 Tg CO2. The disaggregation method estimation is 16% lower, mainly due to uncertainty in activity factors. With only 4% of Bogota's fleet, diesel use accounts for 42% of the CO2 emissions. The emissions are almost evenly shared between public (9% of the fleet) and private transport. Peak emissions occur at 8 a.m. and 6 p.m. with maximum values over a densely industrialized area at the northwest of Bogota. This investigation allowed estimating the relative contribution of fuel and vehicle categories to spatially- and temporally-resolved CO2 emissions. Fuel consumption time series indicate a near-stabilization trend on energy consumption for transportation, which is unexpected taking into account the sustained economic and vehicle fleet growth in Bogota. The comparison of the disaggregation methodology with the IPCC methodology contributes to the analysis of possible error sources on activity factor estimations. This information is very useful for uncertainty estimation and adjustment of primary air pollutant emissions inventories.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burton, E.; Wang, L.; Gonder, J.

This presentation discusses the fuel savings potential from future in-motion wireless power transfer. There is an extensive overlap in road usage apparent across regional vehicle population, which occurs primarily on high-capacity roads--1% of roads are used for 25% of the vehicle miles traveled. Interstates and highways make up between 2.5% and 4% of the total roads within the Consolidated Statistical Areas (CSAs), which represent groupings of metropolitan and/or micropolitan statistical areas. Mileage traveled on the interstates and highways ranges from 54% in California to 24% in Chicago. Road electrification could remove range restrictions of electric vehicles and increase the fuelmore » savings of PHEVs or HEVs if implemented on a large scale. If 1% of the road miles within a geographic area are electrified, 25% of the fuel used by a 'fleet' of vehicles enabled with the technology could be displaced.« less

Preliminary results for model identification in characterizing 2-D topographic road profiles

NASA Astrophysics Data System (ADS)

Kern, Joshua V.; Ferris, John B.

2006-05-01

Load data representing severe customer usage is needed throughout a chassis development program; the majority of these chassis loads originate with the excitation from the road. These chassis loads are increasingly derived from vehicle simulations. Simulating a vehicle traversing long roads is simply impractical, however, and a greatly reduced set of characteristic roads must be found. In order to characterize a road, certain modeling assumptions must be made. Several models have been proposed making various assumptions about the properties that road profiles possess. The literature in this field is reviewed before focusing on two modeling assumptions of particular interest: the stationarity of the signal (homogeneity of the road) and the corresponding interval over which previous data points are correlated to the current data point. In this work, 2-D topographic road profiles are considered to be signals that are realizations of a stochastic process. The objective of this work is to investigate the stationarity assumption and the interval of influence for several carefully controlled sections of highway pavement in the United States. Two statistical techniques are used in analyzing these data: the autocorrelation and the partial autocorrelation. It is shown that the road profile signals in their original form are not stationary and have an extremely long interval of influence on the order of 25m. By differencing the data, however, it is often possible to generate stationary residuals and a very short interval of influence on the order of 250mm. By examining the autocorrelation and the partial autocorrelation, various versions of ARIMA models appear to be appropriate for further modeling. Implications to modeling the signals as Markov Chains are also discussed. In this way, roads can be characterized by the model architecture and the particular parameterization of the model. Any synthetic road realized from a particular model represents all profiles in this set. Realizations of any length can be generated, allowing efficient simulation and timely information about the chassis loads that can be used for design decisions. This work provides insights for future development in the modeling and characterization of 2-D topographic road profiles.

UNECE transport review : first edition--November 2008.

DOT National Transportation Integrated Search

2008-11-01

This year, more than one million people across the world : will die from road traffi c injuries. This total includes about : 400,000 people under 25 years old, and road traffi c crashes : are the leading cause of death for 10- to 24-year-olds. Severa...

Commentary: Status of road safety in Asia.

PubMed

Wismans, Jac; Skogsmo, Ingrid; Nilsson-Ehle, Anna; Lie, Anders; Thynell, Marie; Lindberg, Gunnar

2016-01-01

The objective of this article is to assess the status of road safety in Asia and present accident and injury prevention strategies based on global road safety improvement experiences and discuss the way forward by indicating opportunities and countermeasures that could be implemented to achieve a new level of safety in Asia. This study provides a review and analyses of data in the literature, including from the World Health Organization (WHO) and World Bank, and a review of lessons learned from best practices in high-income countries. In addition, an estimation of costs due to road transport injuries in Asia and review of future trends in road transport is provided. Data on the global and Asian road safety problem and status of prevention strategies in Asia as well as recommendations for future actions are discussed. The total number of deaths due to road accidents in the 24 Asian countries, encompassing 56% of the total world population, is 750,000 per year (statistics 2010). The total number of injuries is more than 50 million, of which 12% are hospital admissions. The loss to the economy in the 24 Asian countries is estimated to around US$800 billion or 3.6% of the gross domestic product (GDP). This article clearly shows that road safety is causing large problems and high costs in Asia, with an enormous impact on the well-being of people, economy, and productivity. In many Asian low- and middle-income countries, the yearly number of fatalities and injuries is increasing. Vulnerable road users (pedestrians, cyclists, and motorcyclists combined) are particularly at risk. Road safety in Asia should be given rightful attention, including taking powerful, effective actions. This review stresses the need for reliable accident data, because there is considerable underreporting in the official statistics. Reliable accident data are imperative to determine evidence-based intervention strategies and monitor the success of these interventions and analyses. On the other hand, lack of good high-quality accident data should not be an excuse to postpone interventions. There are many opportunities for evidence-based transport safety improvements, including measures concerning the 5 key risk factors: speed, drunk driving, not wearing motorcycle helmets, not wearing seat belts, and not using child restraints in cars, as specified in the Decade of Action for Road Safety 2011-2020. In this commentary, a number of additional measures are proposed that are not covered in the Decade of Action Plan. These new measures include separate roads or lanes for pedestrians and cyclists; helmet wearing for e-bike riders; special attention to elderly persons in public transportation; introduction of emerging collision avoidance technologies, in particular automatic emergency braking (AEB) and alcohol locks; improved truck safety focusing on the other road user (including blind spot detection technology; underride protection at the front, rear, and side; and energy-absorbing fronts); and improvements in motorcycle safety concerning protective clothing, requirements for advanced braking systems, improved visibility of motorcycles by using daytime running lights, and better guardrails.

Characterization of Urban Runoff Pollution between Dissolved and Particulate Phases

PubMed Central

Wei, Zhang; Simin, Li; Fengbing, Tang

2013-01-01

To develop urban stormwater management effectively, characterization of urban runoff pollution between dissolved and particulate phases was studied by 12 rainfall events monitored for five typical urban catchments. The average event mean concentration (AEMC) of runoff pollutants in different phases was evaluated. The AEMC values of runoff pollutants in different phases from urban roads were higher than the ones from urban roofs. The proportions of total dissolved solids, total dissolved nitrogen, and total dissolved phosphorus in total ones for all the catchments were 26.19%–30.91%, 83.29%–90.51%, and 61.54–68.09%, respectively. During rainfall events, the pollutant concentration at the initial stage of rainfall was high and then sharply decreased to a low value. Affected by catchments characterization and rainfall distribution, the highest concentration of road pollutants might appear in the later period of rainfall. Strong correlations were also found among runoffs pollutants in different phases. Total suspended solid could be considered as a surrogate for particulate matters in both road and roof runoff, while dissolved chemical oxygen demand could be regarded as a surrogate for dissolved matters in roof runoff. PMID:23935444

Safety analysis of urban arterials at the meso level.

PubMed

Li, Jia; Wang, Xuesong

2017-11-01

Urban arterials form the main structure of street networks. They typically have multiple lanes, high traffic volume, and high crash frequency. Classical crash prediction models investigate the relationship between arterial characteristics and traffic safety by treating road segments and intersections as isolated units. This micro-level analysis does not work when examining urban arterial crashes because signal spacing is typically short for urban arterials, and there are interactions between intersections and road segments that classical models do not accommodate. Signal spacing also has safety effects on both intersections and road segments that classical models cannot fully account for because they allocate crashes separately to intersections and road segments. In addition, classical models do not consider the impact on arterial safety of the immediately surrounding street network pattern. This study proposes a new modeling methodology that will offer an integrated treatment of intersections and road segments by combining signalized intersections and their adjacent road segments into a single unit based on road geometric design characteristics and operational conditions. These are called meso-level units because they offer an analytical approach between micro and macro. The safety effects of signal spacing and street network pattern were estimated for this study based on 118 meso-level units obtained from 21 urban arterials in Shanghai, and were examined using CAR (conditional auto regressive) models that corrected for spatial correlation among the units within individual arterials. Results showed shorter arterial signal spacing was associated with higher total and PDO (property damage only) crashes, while arterials with a greater number of parallel roads were associated with lower total, PDO, and injury crashes. The findings from this study can be used in the traffic safety planning, design, and management of urban arterials. Copyright © 2017 Elsevier Ltd. All rights reserved.

Tailpipe, resuspended road dust, and brake-wear emission factors from on-road vehicles

NASA Astrophysics Data System (ADS)

Abu-Allaban, Mahmoud; Gillies, John A.; Gertler, Alan W.; Clayton, Russ; Proffitt, David

Intensive mass and chemical measurements were performed at roadside locations in Reno, Nevada, and Durham/Research Triangle Park), North Carolina to derive tailpipe, resuspended road dust, and brake-wear emission factors from in-use vehicles. Continuous particulate matter (PM) data were utilized to derive total emission factors while integrated PM data were used to attribute the calculated emission factors to different mechanisms using chemical mass balance receptor modeling and scanning electron microscopy techniques. Resuspended road dust and tailpipe emissions were found to be the dominant mechanisms that contribute significantly to the total PM 10 and PM 2.5 emission factors, respectively. Small contributions from brake-wear were observed at locations where strong braking occurs, but no tire-wear was seen at any sampling location. PM 10 emission rates from light-duty spark ignition (LDSI) vehicles ranged from 40 to 780 mg/km, 10 to 70 mg/km, and 0 to 80 mg/km per vehicle for road dust, tailpipe, and brake-wear, respectively. PM 10 emission rates from heavy-duty vehicles ranged from 230 to 7800 mg/km, 60 to 570 mg/km, and 0 to 610 mg/km per vehicle for road dust, tailpipe, and brake-wear, respectively. PM 2.5 emission rates from LDSI vehicles ranged from 2 to 25 mg/km, 10 to 50 mg/km, and 0 to 5 mg/km per vehicle for road dust, tailpipe, and brake-wear, respectively. PM 2.5 emission rates from heavy-duty vehicles ranged from 15 to 300 mg/km, 60 to 480 mg/km, and 0 to 15 mg/km per vehicle for road dust, tailpipe, and brake-wear, respectively.

Fugitive dust emissions from paved road travel in the Lake Tahoe basin.

PubMed

Zhu, Dongzi; Kuhns, Hampden D; Brown, Scott; Gillies, John A; Etyemezian, Vicken; Gertler, Alan W

2009-10-01

The clarity of water in Lake Tahoe has declined substantially over the past 40 yr. Causes of the degradation include nitrogen and phosphorous fertilization of the lake waters and increasing amounts of inorganic fine sediment that can scatter light. Atmospheric deposition is a major source of fine sediment. A year-round monitoring study of road dust emissions around the lake was completed in 2007 using the Testing Re-entrained Aerosol Kinetic Emissions from Roads (TRAKER) system developed at the Desert Research Institute (DRI). Results of this study found that, compared with the summer season, road dust emissions increased by a factor of 5 in winter, on average, and about a factor of 10 when traction control material was applied to the roads after snow events. For winter and summer, road dust emission factors (grams coarse particulate matter [PM10] per vehicle kilometer traveled [g/vkt]) showed a decreasing trend with the travel speed of the road. The highest emission factors were observed on very low traffic volume roads on the west side of the lake. These roads were composed of either a 3/8-in. gravel material or had degraded asphalt. The principle factors influencing road dust emissions in the basin are season, vehicle speed (or road type), road condition, road grade, and proximity to other high-emitting roads. Combined with a traffic volume model, an analysis of the total emissions from the road sections surveyed indicated that urban areas (in particular South Lake Tahoe) had the highest emitting roads in the basin.

How does a modal shift from short car trips to cycling affect road safety?

PubMed

Schepers, J P; Heinen, E

2013-01-01

Governments aim to promote a shift from car to bicycle, but concerns about road safety seem to represent an important argument against this encouragement. This study examines the road safety impact of a modal shift from short car trips to cycling in Dutch municipalities. The road safety effect is estimated using Accident Prediction Models (APMs) that account for the non-linearity of risk. APMs are developed utilizing Negative Binomial regression. This study is the first to develop APMs using crash and mobility data from municipalities, and utilizing these models to estimate the effects of changing modal splits of current car and bicycle use to modal splits that actually exist in these municipalities. The results suggest that, under conditions such as in Dutch municipalities, transferring short trips made by cars to bicycles does not change the number of fatalities, but increases the number of serious road injuries. The neutral effect on fatalities, despite the high fatality risk for cyclists, can be explained by there being fewer cars on the road to pose a risk to others, the shorter length of bicycle trips compared to the car trips they replace, and the "safety in numbers" phenomenon. The rise in the number of serious road injuries is due wholly to the high number of cycling crashes with no other vehicle involved. The effect of a modal shift is dependent on the age of the population in which the shift is concentrated, and can be influenced by measures affecting cyclists' injury risk. Copyright © 2012 Elsevier Ltd. All rights reserved.

Modelling of road traffic fatalities in India.

PubMed

Goel, Rahul

2018-03-01

Passenger modes in India include walking, cycling, buses, trains, intermediate public transport modes (IPT) such as three-wheeled auto rickshaws or tuk-tuks, motorised two-wheelers (2W) as well as cars. However, epidemiological studies of traffic crashes in India have been limited in their approach to account for the exposure of these road users. In 2011, for the first time, census in India reported travel distance and mode of travel for workers. A Poisson-lognormal mixture regression model is developed at the state level to explore the relationship of road deaths of all the road users with commute travel distance by different on-road modes. The model controlled for diesel consumption (proxy for freight traffic), length of national highways, proportion of population in urban areas, and built-up population density. The results show that walking, cycling and, interestingly, IPT are associated with lower risk of road deaths, while 2W, car and bus are associated with higher risk. Promotion of IPT has twofold benefits of increasing safety as well as providing a sustainable mode of transport. The mode shift scenarios show that, for similar mode shift across the states, the resulting trends in road deaths are highly dependent on the baseline mode shares. The most worrying trend is the steep growth of death burden resulting from mode shift of walking and cycling to 2W. While the paper illustrates a limited set of mode shift scenarios involving two modes at a time, the model can be applied to assess safety impacts resulting from a more complex set of scenarios. Copyright © 2018 The Author. Published by Elsevier Ltd.. All rights reserved.

The New Burma Road(s): How a Networked System of Roads will Best Orient Myanmar towards Economic Success

DTIC Science & Technology

2014-10-30

figure calculated by reviewing a country’s performance in a number of factors such as customs clearance efficiency and tracking capabilities. 76...the transportation sector, marginal costs are calculated based on the total costs per one additional mile of a particular transportation mode. For...Myanmar: KPMG Advisory (Myanmar) Limited, 2013. Kubo , Koji. “Myanmar’s Two Decades of Partial Transition to a Market Economy: A Negative

Agkistrodon piscivorus conanti (Florida cottonmouth) Diet

USGS Publications Warehouse

Grajal-Puche, Alejandro; Josimovich, Jillian; Falk, Bryan; Reed, Robert

2016-01-01

Agkistrodon piscivorus is a generalist predator that feeds on a variety of prey, including snakes (Gloyd and Conant 1990. Snakes of the Agkistrodon Complex: A Monographic Review. Society for the Study of Amphibians and Reptiles, Oxford, Ohio. 614 pp.; Lillywhite et al. 2002. Herpetol. Rev. 33:259–260; Hill and Beaupre 2008. Copeia 2008:105–114). Cemophora coccinea (Scarletsnake) is not known as one of the 26 species of snakes consumed by A. piscivorus (Ernst and Ernst 2011. Venomous Reptiles of the United States, Canada, and Northern Mexico: Volume 1. Johns Hopkins University Press, Baltimore, Maryland. 193 pp.). On 16 June 2015, at 2210 h, we found a dead-on-road A. piscivorus (total length [TL] = 51.0 cm) in Everglades National Park on Main Park Road, 1.88 km S Pa-hay-okee, Miami-Dade Co., Florida, USA (25.414085°N, 80.78183146°W, WGS84; elev. 3 m). The snake had been killed by a vehicle and some internal organs were exposed. Visible stomach contents included a small (TL ca. 15 cm) C. coccinea. Photographic vouchers of the A. piscivorus (UF-Herpetology 177194) and C. coccinea (UF-Herpetology 177195) were deposited in the Division of Herpetology, Florida Museum of Natural History, University of Florida. Despite the fact that these species are sympatric over large areas of the southeastern United States, this is the first known documented predation of C. coccinea by A. piscivorus.

Measurement of the length of pedestrian crossings and detection of traffic lights from image data

NASA Astrophysics Data System (ADS)

Shioyama, Tadayoshi; Wu, Haiyuan; Nakamura, Naoki; Kitawaki, Suguru

2002-09-01

This paper proposes a method for measurement of the length of a pedestrian crossing and for the detection of traffic lights from image data observed with a single camera. The length of a crossing is measured from image data of white lines painted on the road at a crossing by using projective geometry. Furthermore, the state of the traffic lights, green (go signal) or red (stop signal), is detected by extracting candidates for the traffic light region with colour similarity and selecting a true traffic light from them using affine moment invariants. From the experimental results, the length of a crossing is measured with an accuracy such that the maximum relative error of measured length is less than 5% and the rms error is 0.38 m. A traffic light is efficiently detected by selecting a true traffic light region with an affine moment invariant.

Use of car crashes resulting in fatal and serious injuries to analyze a safe road transport system model and to identify system weaknesses.

PubMed

Stigson, Helena; Hill, Julian

2009-10-01

The objective of this study was to evaluate a model for a safe road transport system, based on some safety performance indicators regarding the road user, the vehicle, and the road, by using crashes with fatally and seriously injured car occupants. The study also aimed to evaluate whether the model could be used to identify system weaknesses and components (road user, vehicles, and road) where improvements would yield the highest potential for further reductions in serious injuries. Real-life car crashes with serious injury outcomes (Maximum Abbreviated Injury Scale 2+) were classified according to the vehicle's safety rating by Euro NCAP (European New Car Assessment Programme) and whether the vehicle was fitted with ESC (Electronic Stability Control). For each crash, the road was also classified according to EuroRAP (European Road Assessment Programme) criteria, and human behavior in terms of speeding, seat belt use, and driving under the influence of alcohol/drugs. Each crash was compared and classified according to the model criteria. Crashes where the safety criteria were not met in more than one of the 3 components were reclassified to identify whether all the components were correlated to the injury outcome. In-depth crash injury data collected by the UK On The Spot (OTS) accident investigation project was used in this study. All crashes in the OTS database occurring between 2000 and 2005 with a car occupant with injury rated MAIS2+ were included, for a total of 101 crashes with 120 occupants. It was possible to classify 90 percent of the crashes according to the model. Eighty-six percent of the occupants were injured when more than one of the 3 components were noncompliant with the safety criteria. These cases were reclassified to identify whether all of the components were correlated to the injury outcome. In 39 of the total 108 cases, at least two components were still seen to interact. The remaining cases were only related to one of the safety criteria, namely, the road user (26), the vehicle (19), and the road (24). The criteria for the road and the vehicle did not address multiple event crashes, rear-end crashes, hitting stationary/parked vehicles, or trailers. The model for a safe road transport system was found useful to classify fatal and serious road vehicle crashes. It was possible to classify 90 percent of the crashes according to the safety road transport model. For all these cases it was possible to identify weaknesses and parts of the road transport system with the highest potential to prevent fatal and serious injuries. Injury outcomes were mostly related to an interaction between the 3 components: the road, the vehicle, and the road user.

[Socio-economic costs of road traffic accidents in the Canary Islands, Spain, in 1997].

PubMed

López, J; Serrano, P; Duque, B; Artiles, J

2001-01-01

To evaluate the economic impact in terms of direct and indirect costs road traffic accidents in Canarias Islands (Spain) in 1997. The cost-of-illness method was used. Direct and indirect costs were estimated using prevalence cost, i.e., the costs produced in 1997. Direct costs were divided into health services costs, insurance administration costs and the costs of material damage to the vehicles. Indirect costs were obtained through transformation of physical units into monetary units using the approach of human capital theory. The total cost of road traffic accidents was 39,887.16 million pesetas, equivalent to 24,470 for each inhabitant of the Canary Islands and representing 1.3% of the GNP in this region. The total direct cost was 32,559.67 million pesetas, constituting 82% of the total, which was distributed according to the different concepts analyzed: health service costs: 2,407.40 million pesetas; insurance administration costs, 13,415.89 million pesetas and the costs of material damages to the vehicles: 16,736.38 million pesetas. The total indirect costs was 7,327.49 million pesetas, accounting for 18% of the total costs, which was distributed in premature mortality (6,884.88 million pesetas) and absenteeism from work (442.61 million pesetas). Although this study adopts a conservative approach by omitting costs associated with pain and suffering, permanent disability, and those of at-home care provided by the family, the hight socio-economic cost of road traffic accidents clearly indicates the need for the different administrations of the Canary Islands to collaborate in implementing preventive measures.

Protection against fire in the mountainous forests of Greece case study: forest complex of W. Nestos

NASA Astrophysics Data System (ADS)

Drosos, Vasileios C.; Giannoulas, Vasileios J.; Stergiadou, Anastasia; Karagiannis, Evaggelos; Doukas, Aristotelis-Kosmas G.

2014-08-01

Forest fires are an ancient phenomenon. Appear, however, with devastating frequency and intensity over the last 30 years. In our country, the climatic conditions in combination with the intense relief, favor their rapid spread. Considering the fact that environmental conditions provided for decades even worse (increased temperature, drought and vegetation), then the problem of forest fires in our country, is expected to become more intense. The work focuses on the optimization model of the opening up of the forest mountain areas taking into account the prevention and suppression of forest fires. Research area is the mountain forest complex of W. Nestos of Drama Prefecture. The percentage of forest protection area is examined under the light whether the total hose length corresponds to the actual operational capacity to reach a fire source. For this reason are decided to present a three case study concerning area of the forest being protected by fire extinguishing vehicles. The first one corresponds to a fire suppression bandwidth (buffer zone) with a capacity radius of 150m uphill and 250m downhill from the origin point where the fire extinguishing vehicle stands. The second one corresponds to a fire suppression capacity of 200m uphill and 400m downhill and the third one corresponds to a fire suppression capacity of 300m uphill and 500m downhill. The most important forest technical infrastructures to prevent fire are roads network (opening up) for fire protection and buffer zones. Patrols of small and agile 4 × 4 appropriately equipped (pipe length of 500 meters and putting pressure on uphill to 300 meters) for the first attack of the fire in the summer months coupled with early warning of fire observatories adequately cover the forest protection of W. Nestos complex. But spatial distribution needed improvements to a road density of the optimum economic Dec, both forest protection and for better management (skidding) of woody capital.

Statistical Correction of Air Temperature Forecasts for City and Road Weather Applications

NASA Astrophysics Data System (ADS)

Mahura, Alexander; Petersen, Claus; Sass, Bent; Gilet, Nicolas

2014-05-01

The method for statistical correction of air /road surface temperatures forecasts was developed based on analysis of long-term time-series of meteorological observations and forecasts (from HIgh Resolution Limited Area Model & Road Conditions Model; 3 km horizontal resolution). It has been tested for May-Aug 2012 & Oct 2012 - Mar 2013, respectively. The developed method is based mostly on forecasted meteorological parameters with a minimal inclusion of observations (covering only a pre-history period). Although the st iteration correction is based taking into account relevant temperature observations, but the further adjustment of air and road temperature forecasts is based purely on forecasted meteorological parameters. The method is model independent, e.g. it can be applied for temperature correction with other types of models having different horizontal resolutions. It is relatively fast due to application of the singular value decomposition method for matrix solution to find coefficients. Moreover, there is always a possibility for additional improvement due to extra tuning of the temperature forecasts for some locations (stations), and in particular, where for example, the MAEs are generally higher compared with others (see Gilet et al., 2014). For the city weather applications, new operationalized procedure for statistical correction of the air temperature forecasts has been elaborated and implemented for the HIRLAM-SKA model runs at 00, 06, 12, and 18 UTCs covering forecast lengths up to 48 hours. The procedure includes segments for extraction of observations and forecast data, assigning these to forecast lengths, statistical correction of temperature, one-&multi-days statistical evaluation of model performance, decision-making on using corrections by stations, interpolation, visualisation and storage/backup. Pre-operational air temperature correction runs were performed for the mainland Denmark since mid-April 2013 and shown good results. Tests also showed that the CPU time required for the operational procedure is relatively short (less than 15 minutes including a large time spent for interpolation). These also showed that in order to start correction of forecasts there is no need to have a long-term pre-historical data (containing forecasts and observations) and, at least, a couple of weeks will be sufficient when a new observational station is included and added to the forecast point. Note for the road weather application, the operationalization of the statistical correction of the road surface temperature forecasts (for the RWM system daily hourly runs covering forecast length up to 5 hours ahead) for the Danish road network (for about 400 road stations) was also implemented, and it is running in a test mode since Sep 2013. The method can also be applied for correction of the dew point temperature and wind speed (as a part of observations/ forecasts at synoptical stations), where these both meteorological parameters are parts of the proposed system of equations. The evaluation of the method performance for improvement of the wind speed forecasts is planned as well, with considering possibilities for the wind direction improvements (which is more complex due to multi-modal types of such data distribution). The method worked for the entire domain of mainland Denmark (tested for 60 synoptical and 395 road stations), and hence, it can be also applied for any geographical point within this domain, as through interpolation to about 100 cities' locations (for Danish national byvejr forecasts). Moreover, we can assume that the same method can be used in other geographical areas. The evaluation for other domains (with a focus on Greenland and Nordic countries) is planned. In addition, a similar approach might be also tested for statistical correction of concentrations of chemical species, but such approach will require additional elaboration and evaluation.

An observational study of road safety around selected primary schools in Ibadan municipality, Oyo State, Southwestern Nigeria.

PubMed

Sangowawa, Adesola O; Adebiyi, Akindele O; Faseru, Babalola; Popoola, Olusola J

2012-01-01

Child pedestrians have been identified as vulnerable road users. Although walking as a means of transport has health and other benefits, it exposes children to the risk of road traffic injuries. This study was conducted to assess the availability of road safety features around government-owned primary schools in Ibadan municipality. A multistage sampling technique was used to select 46 of the 74 schools in the study area. Some (11) of the selected schools were sited within the same premises and shared a common entrance; thus a total of 35 school premises were eventually observed. Trained research assistants observed the school environment around the selected schools for road safety features such as location of schools, presence of "school", "child crossing" and "speed limit" road signs, and presence of traffic calming devices (road bumps or zebra crossing). Five (14%) of the schools were located on major roads and eight (23%) had road signs indicating that a school was nearby. Seven (20%) had road bumps close to the school, 15 (43%) had a warden who assisted children to cross, and none had a zebra crossing. Five (14%) schools had pedestrian sidewalks. The study revealed that the environment around a number of the observed schools in the municipality compromised the pupils' road safety. The local government, school authorities, parents, and road safety professionals need to institute definite measures to enhance the road safety environment around schools in the municipality.

An Index For Rating the Total Secondary Safety of Vehicles from Real World Crash Data

PubMed Central

Newstead, S.; Watson, L.; Cameron, M.

2007-01-01

This study proposes a total secondary safety index for light passenger vehicles that rates the relative performance of vehicles in protecting both their own occupants and other road users in the full range of real world crash circumstances. The index estimates the risk of death or serious injury to key road users in crashes involving light passenger vehicles across the full range of crash types. The proposed index has been estimated from real world crash data from Australasia and was able to identify vehicles that have superior or inferior total secondary safety characteristics compared with the average vehicle. PMID:18184497

Instrumentation and monitoring of the nextgen road infrastructure: Some results and perspectives from the R5G project

NASA Astrophysics Data System (ADS)

Hautière, Nicolas; Bourquin, Frédéric

2017-04-01

Through the centuries, the roads - which today constitute in France a huge transport network of 1 millions kilometers length - have always been able to cope with society needs and challenges. As a consequence, the next generation road infrastructure will have to take into account at least three societal transitions: ecological, energetic and digital. The goal of the 5th generation road project (R5G©) [1], led by Ifsttar in France, aligned with the Forever Open program [2], is to design and build demonstrators of such future road infrastructures. The goal of this presentation is to present different results related to the greening of road materials [3], the design of energy-positive roads [4, 5], the test of roads that self-diagnose [6], the design of roads adapted for connected [7], autonomous [8] and electrified vehicles [9], etc. In terms of perspectives, we will demonstrate that the road infrastructures will soon become a complex system: On one side road users will benefit from new services, on the other side such massively connected and instrumented infrastructures will potentially become an opportune sensor for knowledge development in geoscience, such as air quality, visibility and fog monitoring. References: [1] R5G project. r5g.ifsttar.fr [2] Forever Open Road project. www.foreveropenroad.eu [3] Biorepavation project. www.infravation.net/projects/BIOREPAVATION [4] N. Le Touz, J. Dumoulin. Numerical study of the thermal behavior of a new deicing road structure design with energy harvesting capabilities. EGU General Assembly 2015, Apr 2015, Vienne, Austria. [5] S. Asfour, F. Bernardin, E. Toussaint, J.-M. Piau. Hydrothermal modeling of porous pavement for its surface de-freezing. Applied Thermal Engineering. Volume 107, 25 August 2016, Pages 493-500 [6] LGV BPL Instrumentation. http://railenium.eu/wp-content/uploads/2016/08/INSTRUMENTATION-BPL-FR.pdf [7] SCOOP@F project. https://ec.europa.eu/inea/en/connecting-europe-facility/cef-transport/projects-by-country/multi-country/2014-eu-ta-0669-s [8] J. Ehrlich, D. Gruyer, O. Orfila, N. Hautière. Autonomous vehicle : The concept of high quality of service highway. FISITA World congress, Busan, Korea, 2016. [9] FABRIC project. www.fabric-project.eu

The relative efficiency of Iranian's rural traffic police: a three-stage DEA model.

PubMed

Rahimi, Habibollah; Soori, Hamid; Nazari, Seyed Saeed Hashemi; Motevalian, Seyed Abbas; Azar, Adel; Momeni, Eskandar; Javartani, Mehdi

2017-10-13

Road traffic Injuries (RTIs) as a health problem imposes governments to implement different interventions. Target achievement in this issue required effective and efficient measures. Efficiency evaluation of traffic police as one of the responsible administrators is necessary for resource management. Therefore, this study conducted to measure Iran's rural traffic police efficiency. This was an ecological study. To obtain pure efficiency score, three-stage DEA model was conducted with seven inputs and three output variables. At the first stage, crude efficiency score was measured with BCC-O model. Next, to extract the effects of socioeconomic, demographic, traffic count and road infrastructure as the environmental variables and statistical noise, the Stochastic Frontier Analysis (SFA) model was applied and the output values were modified according to similar environment and statistical noise conditions. Then, the pure efficiency score was measured using modified outputs and BCC-O model. In total, the efficiency score of 198 police stations from 24 provinces of 31 provinces were measured. The annual means (standard deviation) of damage, injury and fatal accidents were 247.7 (258.4), 184.9 (176.9), and 28.7 (19.5), respectively. Input averages were 5.9 (3.0) patrol teams, 0.5% (0.2) manpower proportions, 7.5 (2.9) patrol cars, 0.5 (1.3) motorcycles, 77,279.1 (46,794.7) penalties, 90.9 (2.8) cultural and educational activity score, 0.7 (2.4) speed cameras. The SFA model showed non-significant differences between police station performances and the most differences attributed to the environmental and random error. One-way main road, by road, traffic count and the number of household owning motorcycle had significant positive relations with inefficiency score. The length of freeway/highway and literacy rate variables had negative relations, significantly. Pure efficiency score was with mean of 0.95 and SD of 0.09. Iran's traffic police has potential opportunity to reduce RTIs. Adjusting police performance with environmental conditions is necessary. Capability of DEA method in setting quantitative targets for every station induces motivation for managers to reduce RTIs. Repetition of this study is recommended, annually.

Association between travel length and drug use among Brazilian truck drivers.

PubMed

Sinagawa, Daniele Mayumi; De Carvalho, Heráclito Barbosa; Andreuccetti, Gabriel; Do Prado, Natanael Vitoriano; De Oliveira, Keziah Cristina Barbosa Gruber; Yonamine, Mauricio; Muñoz, Daniel Romero; Gjerde, Hallvard; Leyton, Vilma

2015-01-01

To investigate whether the use of the stimulants amphetamines and cocaine by truck drivers in Brazil was related to travel length. Truck drivers were randomly stopped by the Federal Highway Police on interstate roads in Sao Paulo State during morning hours from 2008 to 2011 and invited to participate in the project "Comandos de Saúde nas Rodovias" (Health Commands on the Roads). Participants were asked about the use of drugs, travel distance, and age, and gender was recorded. Samples of urine were collected and analyzed for amphetamine, benzoylecgonine (a metabolite of cocaine), and carboxytetrahydrocannabinol (THC-COOH; a metabolite of cannabis) by immunological screening and quantification by gas chromatography-mass spectroscopy. Current use of amphetamine, cocaine, and cannabis was reported by 5.7%, 0.7%, and 0.3% of the truck drivers, respectively. Amphetamine, benzoylecgonine, and THC-COOH were found in urine samples from 5.4%, 2.6,% and in 1.0% of the drivers, respectively. There was a significant association between the positive cases for amphetamine and reported travel length; 9.9% of urine samples from drivers who reported travel length of more than 270 km were positive for amphetamine, and 10.9% of those drivers reported current use of amphetamines. In most cases, appetite suppressants containing amphetamines had been used, but the purpose was most often to stay awake and alert while driving. Truck drivers with travel length of more than 270 km had significantly higher odds ratio (OR) for having a urine sample that was positive for amphetamine when adjusted for age as confounding factor (OR = 9.41, 95% confidence interval [CI], 3.97-22.26). No significant association was found between the use of cocaine or cannabis and travel length. Truck drivers who reported driving more than 270 km had significantly higher frequencies of urine samples positive for amphetamine and reported significantly more frequent current use of amphetamines than those who reported shorter driving distances.

The road maintenance funding models in Indonesia use earmarked tax

NASA Astrophysics Data System (ADS)

Gultom, Tiopan Henry M.; Tamin, Ofyar Z.; Sjafruddin, Ade; Pradono

2017-11-01

One of the solutions to get a sustainable road maintenance fund is to separate road sector revenue from other accounts, afterward, form a specific account for road maintenance. In 2001, Antameng and the Ministry of Public Works proposed a road fund model in Indonesia. Sources of the road funds proposal was a tariff formed on the nominal total tax. The policy of road funds was proposed to finance the road network maintenance of districts and provincials. This research aims to create a policy model of road maintenance funds in Indonesia using an earmarked tax mechanism. The research method is qualitative research, with data collection techniques are triangulation. Interview methods conducted were semi-structured. Strength, Weakness, Opportunities, and Threat from every part of the models were showen on the survey format. Respondents were representative of executives who involved directly against the financing of road maintenance. Validation model conducted by a discussion panel, it was called the Focus Group Discussion (FGD). The FGD involved all selected respondents. Road maintenance financing model that most appropriately applied in Indonesia was a model of revenue source use an earmarked PBBKB, PKB and PPnBM. Revenue collection mechanism was added tariff of registered vehicle tax (PKB), Vehicle Fuel Tax (PBBKB) and the luxury vehicle sales tax (PPnBM). The funds are managed at the provincial level by a public service agency.

The impact of driver age on lost life years for other road users in France: A population based study of crash-involved road users.

PubMed

Lafont, Sylviane; Amoros, Emmanuelle; Gadegbeku, Blandine; Chiron, Mireille; Laumon, Bernard

2008-01-01

One of the concerns in road safety is the threat older drivers may pose to other road users. Using the rate of lost life years, the present study provides a public health approach to quantify this potential threat. A total of 1570686 motorised vehicle drivers or motorcycle riders and 652246 non-drivers, i.e. vehicle passengers, pedestrians and cyclists involved in injury crashes in France between 1996 and 2004, were included in a population based cross-sectional study. Fatality rates and rate of lost life years for each crash-involved driver age class were calculated for the drivers themselves and for other road users. The study has shown a significant reduction in the rate of lost life years for crash-involved other road users (whether passengers, pedestrians, cyclists or opposing drivers) as driver age increases. Other road users lost half as many years of life when involved in crashes with drivers aged over 85 than with drivers under 65 (1.26 and 2.32 per 100 expected remaining life years, respectively). Our findings suggest that among road users involved in injury crashes, older drivers are less dangerous for the other road users. By attributing other road users' lost life years to each driver age, this study represents a new contribution to the debate about ageing and road safety.

Develop a new testing and evaluation protocol to assess flexbase performance using strength of soil binder.

DOT National Transportation Integrated Search

2008-01-01

This research involved a detailed laboratory study of a new test method for evaluating road base materials based on : the strength of the soil binder. In this test method, small test specimens (5.0in length and 0.75in square cross : section) of binde...

Keeping the Show on the Road: The Role of the Acting Headteacher.

ERIC Educational Resources Information Center

Draper, Janet; McMichael, Paquita

2003-01-01

Study of acting heads' situations, experience, and support in the position. Uncertainty on length of appointment, role boundaries, and freedom to innovate led to some dissatisfaction and unwillingness to apply for permanent positions. Findings also raise issues for the maintenance of school performance in times of change and uncertainty. (Contains…

Building Relationships, Yielding Results: How Superintendents Can Work with School Boards to Create Productive Teams

ERIC Educational Resources Information Center

Hackett, Julie L.

2015-01-01

In "Building Relationships, Yielding Results," the seasoned superintendent of an urban school district provides a clear road map for effective collaboration with school boards and the type of relationship-building required to achieve long-term, sustainable reforms. Instead of keeping school board members at arm's length or inundating…

50 CFR 32.46 - Nebraska.

Code of Federal Regulations, 2014 CFR

2014-10-01

... other than emergencies. We allow parking within one vehicle length of the road. 6. We prohibit publicly... minnows and the possession of any fish not taken lawfully from one of the refuge lakes open to fishing. 4... conditions: 1. Hunters may possess only approved nontoxic shot (see § 32.2(k)). 2. We prohibit the shooting...

The ecological impact assessment of a proposed road development (the Slovak approach)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Igondova, Erika, E-mail: erika.igondova@gmail.com; Pavlickova, Katarina, E-mail: pavlickova60@gmail.com; Majzlan, Oto, E-mail: majzlan@fns.uniba.sk

The construction of roads is one of the most widespread forms of natural landscape modification. Over the last 20 years, dozens of road constructions have been assessed in Slovakia, which makes it possible to talk about methodological positives and negatives. A special feature of Slovakia is that many planned or renovated roads are located in protected areas or are in contact with them (including Natura 2000 sites). Therefore, it is important to understand the scope of the roads' ecological impacts and find ways for their appropriate evaluation and incorporation into the Environmental Impact Assessment process. For this reason, the Ecologicalmore » Impact Assessment methodology can be used as a basis for our research, which consists of three stages. In the first stage (scoping), a buffer circumventing the proposed road is created to determine the area for impact prediction and evaluation. Subsequently, the landscape structure and baseline landscape conditions are discussed, a map of current landscape structure is created and the current ecological status of the affected area is calculated. In the second stage (the evaluation of ecological resources), important ecological parts of the landscape are delineated. This step is based on the importance of previous information and its vulnerability, and leads to the mapping of the road ecological impact zone. In the third stage (impact assessment), important ecological parts are spatially correlated with the proposed road construction. Finally, the significance of ecological impacts of the activity is evaluated by applying specific criteria (duration, reversibility, magnitude, size and road ecological impact zone significance). A scale is proposed for each criterion to evaluate the total significance of impacts. In this way, detailed significant ecological impacts can be found which will help lead to proposed correct mitigation measures and a post-project analysis. - Highlights: • This paper proposes a methodology for the EcIA of road construction. • It tries to understand the spatial structure and configuration of landscape elements. • The most important ecological parts within the territory are identified. • The total significance of ecological receptors is evaluated by applying criteria.« less

A Fuel-Based Assessment of On-Road and Off-Road Mobile Source Emission Trends

NASA Astrophysics Data System (ADS)

Dallmann, T. R.; Harley, R. A.

2009-12-01

Mobile sources contribute significantly to emissions of nitrogen oxides (NOx) and fine particulate matter (PM2.5) in the United States. These emissions lead to a variety of environmental concerns including adverse human health effects and climate change. In the electric power sector, sulfur dioxide (SO2) and NOx emissions from power plants are measured directly using continuous emission monitoring systems. In contrast for mobile sources, statistical models are used to estimate average emissions from a very large and diverse population of engines. Despite much effort aimed at improving them, mobile source emission inventories continue to have large associated uncertainties. Alternate methods are needed to help evaluate estimates of mobile source emissions and quantify and reduce the associated uncertainties. In this study, a fuel-based approach is used to estimate emissions from mobile sources, including on-road and off-road gasoline and diesel engines. In this approach, engine activity is measured by fuel consumed (in contrast EPA mobile source emission models are based on vehicle km of travel and total amount of engine work output for on-road and off-road engines, respectively). Fuel consumption is defined in this study based on highway fuel tax reports for on-road engines, and from surveys of fuel wholesalers who sell tax-exempt diesel fuel for use in various off-road sectors such as agriculture, construction, and mining. Over the decade-long time period (1996-2006) that is the focus of the present study, national sales of taxable gasoline and diesel fuel intended for on-road use increased by 15 and 43%, respectively. Diesel fuel use by off-road equipment increased by about 20% over the same time period. Growth in fuel consumption offset some of the reductions in pollutant emission factors that occurred during this period. This study relies on in-use measurements of mobile source emission factors, for example from roadside and tunnel studies, remote sensing, and plume capture experiments. Extensive in-use emissions data are available for NOx, especially for on-road engines. Measurements of exhaust PM2.5 emission factors are sparse in comparison. For NOx, there have been dramatic (factor of 2) decreases in emission factors for on-road gasoline engines between 1996 and 2006, due to use of improved catalytic converters on most engines. In contrast, diesel NOx emission factors decreased more gradually over the same time period. Exhaust PM2.5 emission factors appear to have decreased for most engine categories, but emission uncertainties are large for this pollutant. Pollutant emissions were estimated by combining fuel sales with emission factors expressed per unit of fuel burned. Diesel engines are the dominant mobile source of both NOx and PM2.5; the diesel contribution to NOx has increased over time as gasoline engine emissions have declined. Comparing fuel-based emission estimates with EPA’s national emission inventory led to the following conclusions: (1) total emissions of both NOx and PM2.5 estimated by two different methods were similar, (2) the distribution of source contributions to these totals differ significantly, with higher relative contributions coming from on-road diesel engines in this study compared to EPA.

Degree of contamination and sources of polychlorinated biphenyls in Meandering Road Creek and Woods Inlet of Lake Worth, Fort Worth, Texas, 2004 and 2006-07

USGS Publications Warehouse

Braun, Christopher L.; Wilson, Jennifer T.; Van Metre, Peter C.

2008-01-01

Lake Worth is a reservoir on the West Fork Trinity River on the western edge of Fort Worth, Texas. Air Force Plant 4 (AFP4) is on the eastern shore of Woods Inlet, an arm of Lake Worth that extends south from the main body of the lake. Two previous reports documented ele-vated polychlorinated biphenyl (PCB) concentrations in surficial sediment in Woods Inlet relative to those in surficial sediment in other parts of Lake Worth. This report presents the results of another USGS study, done in cooperation with the U.S. Air Force, to indicate the degree of PCB contamination of Meandering Road Creek and Woods Inlet and to identify possible sources of PCBs in Meandering Road Creek and Woods Inlet on the basis of suspended, streambed, and lake-bottom sediment samples collected there in 2004 and 2006-07. About 40 to 80 percent of total PCB concentrations (depending on how total PCB concentration is computed) in suspended sediment exceed the threshold effect concentration, a concentration below which adverse effects to benthic biota rarely occur. About 20 percent of total PCB concentrations (computed as sum of three Aroclors) in suspended sediment exceed the probable effect concentration, a concentration above which adverse effects to benthic biota are expected to occur frequently. About 20 to 30 percent of total PCB concentrations in streambed sediment exceed the threshold effect concentration; and about 6 to 20 percent of total PCB concentrations in lake-bottom (Woods Inlet) sediment exceed the threshold effect concentration. No streambed or lake-bottom sediment concentrations exceed the probable effect concentration. The sources of PCBs to Meandering Road Creek and Woods Inlet were investigated by comparing the relative distributions of PCB congeners of suspended sediment to those of streambed and lake-bottom sediment. The sources of PCBs were identified using graphical analysis of normalized concentrations (congener ratios) of 11 congeners. For graphical analysis, the sampling sites were divided into three groups with each group associated with one of the three outfalls sampled: SSO, OF4, and OF5. The variations of normalized PCB congener concentrations from Woods Inlet, from outfalls along Meandering Road Creek, and from streambed sediment sampling sites along Meandering Road Creek generally form similar patterns within sample groups, which is indicative of a common source of PCBs to each group. Overall, the variations in congener ratios indicate that PCBs in surficial lake-bottom sediment of Woods Inlet probably entered Woods Inlet primarily from Meandering Road Creek, and that runoff from AFP4 is a prominent source of PCBs in Meandering Road Creek. Sixteen of the 20 box core sites in Woods Inlet had lower PCB concentrations in the 2006 cores compared to those in the 2003 cores.

A comparative study of noise pollution levels in some selected areas in Ilorin Metropolis, Nigeria.

PubMed

Oyedepo, Olayinka S; Saadu, Abdullahi A

2009-11-01

The noise pollution is a major problem for the quality of life in urban areas. This study was conducted to compare the noise pollution levels at busy roads/road junctions, passengers loading parks, commercial, industrial and residential areas in Ilorin metropolis. A total number of 47-locations were selected within the metropolis. Statistical analysis shows significant difference (P < 0.05) in noise pollution levels between industrial areas and low density residential areas, industrial areas and high density areas, industrial areas and passengers loading parks, industrial areas and commercial areas, busy roads/road junctions and low density areas, passengers loading parks and commercial areas and commercial areas and low density areas. There is no significant difference (P > 0.05) in noise pollution levels between industrial areas and busy roads/road junctions, busy roads/road junctions and high density areas, busy roads/road junctions and passengers loading parks, busy roads/road junctions and commercial areas, passengers loading parks and high density areas, passengers loading parks and commercial areas and commercial areas and high density areas. The results show that Industrial areas have the highest noise pollution levels (110.2 dB(A)) followed by busy roads/Road junctions (91.5 dB(A)), Passengers loading parks (87.8 dB(A)) and Commercial areas (84.4 dB(A)). The noise pollution levels in Ilorin metropolis exceeded the recommended level by WHO at 34 of 47 measuring points. It can be concluded that the city is environmentally noise polluted and road traffic and industrial machineries are the major sources of it. Noting the noise emission standards, technical control measures, planning and promoting the citizens awareness about the high noise risk may help to relieve the noise problem in the metropolis.

The Influences of Drivers/Riders in Road Traffic Crashes in Ghana between 2001 and 2011

PubMed Central

Amo, Thompson

2014-01-01

The road traffic accident (RTA) is a global misfortune and the leading cause of death among young drivers. In safeguarding and developing innovative safety strategies to curtail the situation, the factors causing this menace needs proper attention and investigation. The objective of this study is to identify the potential factors responsible for causing a traffic accident in Ghana. In studying these factors extensively, a descriptive study with quantitative technique was employed. Analyses used data between 2001 and 2011 obtained from the Building and Road Research Institute (BRRI) with specific focus on the age, drinking, vehicle defect, driver/rider error, injury, road surface type and weather. A total of 200,528 cases of drivers/riders were analysed and discovered that, people with younger age (21-40) contribute 62.97% of total crashes. Crashes reduce steadily as drivers/riders age increases. Also, the vehicle defect analysis shows that 87.46% of accidents cannot be linked to the fault of the vehicle before incidence, while the majority (75.38%) of drivers/riders had no injury during a traffic accident. Higher number of fatalities are recorded on tar good roads (81.57%) and clear weather (91.75%). The fight against this canker by the authorities must consider periodic refresher courses for younger drivers/riders on traffic law to bring to bear the adherence of good driving/riding principles and attitudes to ensure that safety is guaranteed for all road users in the country. PMID:24999145

The influences of drivers/riders in road traffic crashes in Ghana between 2001 and 2011.

PubMed

Amo, Thompson

2014-04-07

The road traffic accident (RTA) is a global misfortune and the leading cause of death among young drivers. In safeguarding and developing innovative safety strategies to curtail the situation, the factors causing this menace needs proper attention and investigation. The objective of this study is to identify the potential factors responsible for causing a traffic accident in Ghana. In studying these factors extensively, a descriptive study with quantitative technique was employed. Analyses used data between 2001 and 2011 obtained from the Building and Road Research Institute (BRRI) with specific focus on the age, drinking, vehicle defect, driver/rider error, injury, road surface type and weather. A total of 200,528 cases of drivers/riders were analysed and discovered that, people with younger age (21-40) contribute 62.97% of total crashes. Crashes reduce steadily as drivers/riders age increases. Also, the vehicle defect analysis shows that 87.46% of accidents cannot be linked to the fault of the vehicle before incidence, while the majority (75.38%) of drivers/riders had no injury during a traffic accident. Higher number of fatalities are recorded on tar good roads (81.57%) and clear weather (91.75%). The fight against this canker by the authorities must consider periodic refresher courses for younger drivers/riders on traffic law to bring to bear the adherence of good driving/riding principles and attitudes to ensure that safety is guaranteed for all road users in the country.

Brazilian Road Traffic Fatalities: A Spatial and Environmental Analysis

PubMed Central

de Andrade, Luciano; Vissoci, João Ricardo Nickenig; Rodrigues, Clarissa Garcia; Finato, Karen; Carvalho, Elias; Pietrobon, Ricardo; de Souza, Eniuce Menezes; Nihei, Oscar Kenji; Lynch, Catherine; de Barros Carvalho, Maria Dalva

2014-01-01

Background Road traffic injuries (RTI) are a major public health epidemic killing thousands of people daily. Low and middle-income countries, such as Brazil, have the highest annual rates of road traffic fatalities. In order to improve road safety, this study mapped road traffic fatalities on a Brazilian highway to determine the main environmental factors affecting road traffic fatalities. Methods and Findings Four techniques were utilized to identify and analyze RTI hotspots. We used spatial analysis by points by applying kernel density estimator, and wavelet analysis to identify the main hot regions. Additionally, built environment analysis, and principal component analysis were conducted to verify patterns contributing to crash occurrence in the hotspots. Between 2007 and 2009, 379 crashes were notified, with 466 fatalities on BR277. Higher incidence of crashes occurred on sections of highway with double lanes (ratio 2∶1). The hotspot analysis demonstrated that both the eastern and western regions had higher incidences of crashes when compared to the central region. Through the built environment analysis, we have identified five different patterns, demonstrating that specific environmental characteristics are associated with different types of fatal crashes. Patterns 2 and 4 are constituted mainly by predominantly urban characteristics and have frequent fatal pedestrian crashes. Patterns 1, 3 and 5 display mainly rural characteristics and have higher prevalence of vehicular collisions. In the built environment analysis, the variables length of road in urban area, limited lighting, double lanes roadways, and less auxiliary lanes were associated with a higher incidence of fatal crashes. Conclusions By combining different techniques of analyses, we have identified numerous hotspots and environmental characteristics, which governmental or regulatory agencies could make use to plan strategies to reduce RTI and support life-saving policies. PMID:24498051

76 FR 16440 - Endangered and Threatened Wildlife and Plants; Permits, Town of Apple Valley, San Bernardino...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-23

... facilities and roads; construction of new public facilities (approximately 1,400 acres of the ground-disturbance total); and construction, operation, and maintenance of renewable energy projects, including solar... Supervisor, Ventura Fish and Wildlife Office, U.S. Fish and Wildlife Service, 2493 Portola Road, Suite B...

[Stress as an occupational risk factor among policemen of road patrol service].

PubMed

Fedotova, I V; Chernikova, E F

The hygienic evaluation of occupational factors which characterized working conditions of traffic policemen of road patrol service was performed. The authors found that along with high neuro-emotional occupational stress in traffic policemen, they exposed to unfavorable microclimate, higher level of noise, vibration and their work was classified as heavy. Also, traffic policemen presented subjective complaints about negative impact of polluted air of motorways on their health status. Prevalence of chronic diseases was analyzed in group of 431 traffic policemen. The authors revealed a leading role of the following diseases: musculoskeletal diseases, diseases of connective tissue, digestive diseases, diseases of the nerve system, circulation system; their portion in the morbidity structure was 86.0%. The association of these diseases with occupation was confirmed by the increasing of their incidence with increasing of length of duration of service. Calculation of indices of relative occupational risk showed (that especially important) the increase of the length of service led to the increase in the risk ofpathologies, in which stress played a significant role. In examined group, the authors revealed such diseases as hypertension, autonomous-vascular dystonia, gastric and duodenal ulcer. Risk of the development of these diseases in some age/length of service groups is classified as high and very high. Obtained results provide the evidence that measures aimed to the decrease of the exposure to occupational factors will promote prevention of stress-stipulated diseases among traffic policemen.

Black carbon emissions from Russian diesel sources. Case study of Murmansk

DOE PAGES

Evans, M.; Kholod, N.; Malyshev, V.; ...

2015-07-27

Black carbon (BC) is a potent pollutant because of its effects on climate change, ecosystems and human health. Black carbon has a particularly pronounced impact as a climate forcer in the Arctic because of its effect on snow albedo and cloud formation. We have estimated BC emissions from diesel sources in the Murmansk Region and Murmansk City, the largest city in the world above the Arctic Circle. In this study we developed a detailed inventory of diesel sources including on-road vehicles, off-road transport (mining, locomotives, construction and agriculture), ships and diesel generators. For on-road transport, we conducted several surveys tomore » understand the vehicle fleet and driving patterns, and, for all sources, we also relied on publicly available local data sets and analysis. We calculated that BC emissions in the Murmansk Region were 0.40 Gg in 2012. The mining industry is the largest source of BC emissions in the region, emitting 69 % of all BC emissions because of its large diesel consumption and absence of emissions controls. On-road vehicles are the second largest source, emitting about 13 % of emissions. Old heavy duty trucks are the major source of emissions. Emission controls on new vehicles limit total emissions from on-road transportation. Vehicle traffic and fleet surveys show that many of the older cars on the registry are lightly or never used. We also estimated that total BC emissions from diesel sources in Russia were 50.8 Gg in 2010, and on-road transport contributed 49 % of diesel BC emissions. Agricultural machinery is also a significant source Russia-wide, in part because of the lack of controls on off-road vehicles.« less

Comparison of human exposure pathways in an urban brownfield: reduced risk from paving roads.

PubMed

James, Kyle; Farrell, Richard E; Siciliano, Steven D

2012-10-01

Risk assessments often do not quantify the risk associated with soil inhalation. This pathway generally makes a negligible contribution to the cumulative risk, because soil ingestion is typically the dominant exposure pathway. Conditions in northern or rural centers in Canada characterized by large areas of exposed soil, including unpaved roads, favor the resuspension of soil particles, making soil inhalation a relevant risk pathway. The authors determined and compared human exposure to metals and polycyclic aromatic hydrocarbons (PAHs) from soil ingestion and inhalation and analyzed the carcinogenic and noncarcinogenic risks before and after roads were paved in a northern community. To determine the inhalation exposure, three size fractions of airborne particulate matter were collected (total suspended particulates [TSP], particulate matter with an aerodynamic diameter less than 10 µm [PM10], and particulate matter with an aerodynamic diameter less than 2.5 µm [PM2.5]) before and after roads were paved. Road paving reduced the concentration of many airborne contaminants by 25 to 75%, thus reducing risk. For example, before paving, the carcinogenic risk associated with inhalation of Cr was 3.4 excess cancers per 100,000 people exposed, whereas after paving, this risk was reduced to 1.6 in 100,000. Paving roads reduced the concentrations of total suspended particulates (TSP; p < 0.1) and PM10 (p < 0.05) but not PM25. Consequently, the ingestion of inhaled soil particles was substantially reduced. The authors conclude that resuspended soil is likely an important source of risk for many northern communities and that paving roads is an effective method of reducing risk from the inhalation of soil particles. Copyright © 2012 SETAC.

Black carbon emissions from Russian diesel sources. Case study of Murmansk

DOE Office of Scientific and Technical Information (OSTI.GOV)

Evans, M.; Kholod, N.; Malyshev, V.

Black carbon (BC) is a potent pollutant because of its effects on climate change, ecosystems and human health. Black carbon has a particularly pronounced impact as a climate forcer in the Arctic because of its effect on snow albedo and cloud formation. We have estimated BC emissions from diesel sources in the Murmansk Region and Murmansk City, the largest city in the world above the Arctic Circle. In this study we developed a detailed inventory of diesel sources including on-road vehicles, off-road transport (mining, locomotives, construction and agriculture), ships and diesel generators. For on-road transport, we conducted several surveys tomore » understand the vehicle fleet and driving patterns, and, for all sources, we also relied on publicly available local data sets and analysis. We calculated that BC emissions in the Murmansk Region were 0.40 Gg in 2012. The mining industry is the largest source of BC emissions in the region, emitting 69 % of all BC emissions because of its large diesel consumption and absence of emissions controls. On-road vehicles are the second largest source, emitting about 13 % of emissions. Old heavy duty trucks are the major source of emissions. Emission controls on new vehicles limit total emissions from on-road transportation. Vehicle traffic and fleet surveys show that many of the older cars on the registry are lightly or never used. We also estimated that total BC emissions from diesel sources in Russia were 50.8 Gg in 2010, and on-road transport contributed 49 % of diesel BC emissions. Agricultural machinery is also a significant source Russia-wide, in part because of the lack of controls on off-road vehicles.« less

How wide is a road? The association of roads and mass-wasting in a forested montane environment

USGS Publications Warehouse

Larsen, M.C.; Parks, J.E.

1997-01-01

A spatial data base of 1609 landslides was analysed using a geographic information system to determine landslide frequency in relation to highways. A 126 km long transportation network in a 201km2 area of humid-tropical, mountainous, forested terrain in Puerto Rico was used in conjunction with a series of 20 buffer (disturbance) zones varying from 5 to 400m in length, measured perpendicular to the highways. Average landslide frequency in the study area at distances greater than 85m from roads was about six landslides per square kilometre. At distances of 85m or less on either side of a highway, landslide frequency was about 30 landslides per square kilometre. On average, this elevated disturbance rate affected 330m2km-2a-1 within the 170m swath. The mass-wasting rate outside of the disturbance zone affected 40m2km-2 a-1. These results indicate that the rate of mass-wasting disturbance is increased from five to eight times in a 170m wide swath along road corridors. The lateral extent of the environmental impact of roads in the study area is greater than is commonly perceived. The approach described herein demonstrates a simple method to assess the spatial association of mass-wasting with highways. ?? 1997 by John Wiley & Sons, Ltd.

[Factors associated with road accidents in the city of Lubumbashi].

PubMed

Kandolo, Simon Ilunga; Matungulu, Charles Matungulu; Mukanya, Pascal Kimba; Umba, Irène Kabange; Kabamba, Julie Ndayi; Numbi, Oscar Luboya; Ilunga, Benjamin Kabyla; Kaj, Françoise Malonga; Lubaba, Célestin Banza; Ngongo, Ghislain Mashini

2014-01-01

We conducted a retrospective non-comparative cross-sectional study in Lubumbashi on factors associated with road accidents. To contribute to the reduction of morbidity and mortality related to road accidents based on a better understanding of this phenomenon in the city of Lubumbashi, to assess the frequency and the growth of road accidents in the city of Lubumbashi and to determine the factors predisposing to these accidents. This non-controlled retrospective cross-sectional descriptive study covered the period from 1st January to 31st December 2008, and included all cases of vehicles registered by the police department after an accident. A total of 1,915 road traffic were reported, mostly caused by public transport vehicles (59%) driven by young adult males (89% of cases) with a mean age of 28 years. The main cause was speeding combined with other factors (34% of cases). The majority of these accidents occurred in the city of Lubumbashi (52.9% of cases) between 6:00 a.m. and 6:00 p.m. (74% of cases). Transit vehicles were exposed to a greater risk of road accidents (59%). There is an urgent need for accurate information on the rules of the road for drivers and road users to reduce the mortality and morbidity due to road accidents.

Productivity losses from road traffic deaths in Turkey.

PubMed

Naci, Huseyin; Baker, Timothy D

2008-03-01

The importance of road traffic injuries in Turkey is not generally appreciated, in part due to lack of knowledge of its economic burden and in part due to major underestimation in official statistics. The total years of potential life lost and potentially productive years of life lost from mortality were calculated in order to estimate the cost of productivity losses from road traffic deaths in Turkey. More years of potentially productive life are lost due to road traffic deaths than to respiratory tract illnesses or diabetes mellitus, two other serious health problems in Turkey. Road traffic deaths cost Turkey an estimated USD 2.6 billion every year in productivity losses alone, more than the World Bank estimate of the indirect costs from the 1999 Marmara earthquake (USD 1.2-2 billion), Turkey's worst earthquake since 1939 (World Bank Turkey Country Office, 1999). This study highlights the importance of accurate information in ameliorating the burden of road traffic safety in Turkey. Turkey has great opportunities to implement cost-effective interventions to reduce the economic burden of fatal and non-fatal road traffic injuries.

Trends in on-road vehicle emissions and ambient air quality in Atlanta, Georgia, USA, from the late 1990s through 2009.

PubMed

Vijayaraghavan, Krish; DenBleyker, Allison; Ma, Lan; Lindhjem, Chris; Yarwood, Greg

2014-07-01

On-road vehicle emissions of carbon monoxide (CO), nitrogen oxides (NO(x)), and volatile organic compounds (VOCs) during 1995-2009 in the Atlanta Metropolitan Statistical Area were estimated using the Motor Vehicle Emission Simulator (MOVES) model and data from the National Emissions Inventories and the State of Georgia. Statistically significant downward trends (computed using the nonparametric Theil-Sen method) in annual on-road CO, NO(x), and VOC emissions of 6.1%, 3.3%, and 6.0% per year, respectively, are noted during the 1995-2009 period despite an increase in total vehicle distance traveled. The CO and NO(x) emission trends are correlated with statistically significant downward trends in ambient air concentrations of CO and NO(x) in Atlanta ranging from 8.0% to 11.8% per year and from 5.8% to 8.7% per year, respectively, during similar time periods. Weather-adjusted summertime ozone concentrations in Atlanta exhibited a statistically significant declining trend of 2.3% per year during 2001-2009. Although this trend coexists with the declining trends in on-road NO(x), VOC, and CO emissions, identifying the cause of the downward trend in ozone is complicated by reductions in multiple precursors from different source sectors. Implications: Large reductions in on-road vehicle emissions of CO and NO(x) in Atlanta from the late 1990s to 2009, despite an increase in total vehicle distance traveled, contributed to a significant improvement in air quality through decreases in ambient air concentrations of CO and NO(x) during this time period. Emissions reductions in motor vehicles and other source sectors resulted in these improvements and the observed declining trend in ozone concentrations over the past decade. Although these historical trends cannot be extrapolated to the future because pollutant concentration contributions due to on-road vehicle emissions will likely become an increasingly smaller fraction of the atmospheric total, they provide an indication of the benefits of past control measures.

The Felbertauern landslide of 2013: Traffic disruption, regional economic consequences and policy decisions

NASA Astrophysics Data System (ADS)

Pfurtscheller, Clemens; Genovese, Elisabetta

2016-04-01

The Felbertauern landslide of May 2013 caused the total destruction of approximately 100 meters of road including an avalanche gallery, generating several direct and indirect impacts on the regional-economy. The Felbertauern road, an important traffic arteria for the whole NUTS-3 region East-Tyrol (Austria), was totally blocked for several weeks. Short after the event, regional decision makers were hardly in need for an estimation of the regional-economic impacts of the road blockage to opt for alternatives to reopen the road. So, two weeks after the event, an analysis of the possible effects was carried out using only scattered information and statistical data. The analysis is based on a three-month interruption scenario. Retrospectively the road blockage was only two months. Due to the fact that short after the event no up-to-date data on regional-economics at necessary scales was available, impacts on tourism by analysing overnight stays, additional transportation costs and time losses for the local companies were calculated. Using these numbers, a cost-benefit-analysis was carried out for a projected bypass, a mid-term 1.5 kilometer long route as an alternative to the destroyed road. Finally, the impacts on the local companies were severe, due to additional transportation costs of approx. Euro 1.4 million and Euro 76 000 additional time costs using an alternative approach. The impacts on regional tourism were calculated with Euro 7.7 to 10.7 million - that means 0.6 to 0.8% of the total economic output of the region. The study shows the strong impact of indirect and business interruption costs on regional economies and describes the major problems faced during the study - in particular the low availability of input data. The results of consistent cost assessment are critical for decision makers who are responsible for the development of policies to prevent the impacts on societies.

The role of roadsides in plant invasions: a demographic approach.

PubMed

Christen, Douglas; Matlack, Glenn

2006-04-01

Non-native plant species are common along roadsides, but presence does not necessarily indicate spread along the road axis. Roadsides may serve merely as habitat for a species spreading independently of roads. The potential conduit function of roads depends on the habitat specificity of the spreading species, its dispersal range relative to the spacing of roads in the landscape, and the relative importance of long- and short-range dispersal. We describe a demographic model of the road x species interaction and suggest methods of assessing conduit function in the field based on the model results. A species limited to roadside habitat will be constrained to spread along the road axis unless its long-range dispersal is sufficient to carry it across the intervening unfavorable area to another road. It will propagate along a road corridor at a rate determined by the scale of short-range dispersal. Effective management of an invasion requires distinguishing between the habitat and conduit functions, a distinction difficult to make with only snapshot data. Invasions can be reconstructed by several methods, but none is totally satisfactory. We suggest comparing stem distributions on transects parallel and perpendicular to the road axis, and beside the road, and away from it, with an idealized Gaussian curve. Such comparisons would allow discrimination between pattern determined by habitat suitability and pattern reflecting random and facilitated dispersal.

Soil Physical, Chemical, and Thermal Characterization, Teller Road Site, Seward Peninsula, Alaska, 2016

DOE Data Explorer

Graham, David; Kholodov, Alexander; Wilson, Cathy; Moon, Ji-Won; Romanovsky, Vladimir; Busey, Bob

2018-02-05

This dataset provides the results of physical, chemical, and thermal characterization of soils at the Teller Road Site, Seward Peninsula, Alaska. Soil pits were dug from 7-14 September 2016 at designated Intensive Stations 2 through 9 at the Teller Road MM 27 Site. This dataset includes field observations and descriptions of soil layers or horizons, field measurements of soil volumetric water content, soil temperature, thermal conductivity, and heat capacity. Laboratory measurements of soil properties include gravimetric water content, bulk density, volumetric water content, and total carbon and nitrogen.

Road dust and its effect on human health: a literature review

PubMed Central

2018-01-01

The purpose of this study was to determine the effects of road dust on human health. A PubMed search was used to extract references that included the words “road dust” and “health” or “fugitive dust” and “health” in the title or abstract. A total of 46 references were extracted and selected for review after the primary screening of 949 articles. The respiratory system was found to be the most affected system in the human body. Lead, platinum-group elements (platinum, rhodium, and bohrium), aluminum, zinc, vanadium, and polycyclic aromatic hydrocarbons were the components of road dust that were most frequently referenced in the articles reviewed. Road dust was found to have harmful effects on the human body, especially on the respiratory system. To determine the complex mechanism of action of various components of road dust on the human body and the results thereof, the authors recommend a further meta-analysis and extensive risk-assessment research into the health impacts of dust exposure. PMID:29642653

Locating inefficient links in a large-scale transportation network

NASA Astrophysics Data System (ADS)

Sun, Li; Liu, Like; Xu, Zhongzhi; Jie, Yang; Wei, Dong; Wang, Pu

2015-02-01

Based on data from geographical information system (GIS) and daily commuting origin destination (OD) matrices, we estimated the distribution of traffic flow in the San Francisco road network and studied Braess's paradox in a large-scale transportation network with realistic travel demand. We measured the variation of total travel time Δ T when a road segment is closed, and found that | Δ T | follows a power-law distribution if Δ T < 0 or Δ T > 0. This implies that most roads have a negligible effect on the efficiency of the road network, while the failure of a few crucial links would result in severe travel delays, and closure of a few inefficient links would counter-intuitively reduce travel costs considerably. Generating three theoretical networks, we discovered that the heterogeneously distributed travel demand may be the origin of the observed power-law distributions of | Δ T | . Finally, a genetic algorithm was used to pinpoint inefficient link clusters in the road network. We found that closing specific road clusters would further improve the transportation efficiency.

A high temporal-spatial vehicle emission inventory based on detailed hourly traffic data in a medium-sized city of China.

PubMed

Liu, Yong-Hong; Ma, Jin-Ling; Li, Li; Lin, Xiao-Fang; Xu, Wei-Jia; Ding, Hui

2018-05-01

To improve the accuracy and temporal-spatial resolution for a vehicle emission inventory in a medium-sized city with a strip road network, this study was conducted based on detailed hourly traffic-flow data for each day of 2014, and covered all road types and regions in the city of Foshan. Detailed hourly emission characteristics and sources in five regions were analysed. The results showed that the total vehicle emissions of CO, NO X , VOCs, and PM 2.5 were 13.10 × 10 4 , 0.23 × 10 4 , 4.46 × 10 4 , and 0.18 × 10 4 tons, respectively. Motorcycles (MCs) and light passenger cars (LPCs) were the dominant contributors of CO emissions, while buses and heavy passenger cars (HPCs) were the dominant contributors for NO X . As a whole, the daytime contributions to total emissions were close to 80%, and emissions during the peak periods accounted for almost 40%. Specifically, the hourly emissions of each pollutant on workdays were higher than on non-workdays (maximum up to 64.2%), and for some roads the early peak periods changed significantly from workdays to non-workdays. At expressways, artery roads, and local roads, the daily emission intensities of CO, NOx, and PM 2.5 in Foshan were close to or even higher than that of Beijing. On a regional scale, the temporal variation of vehicle emissions on workdays at artery roads of different regions were similar. In addition, the higher emission intensities of CO and VOCs were identified in DaLiang-RongGui (DLRG) and that of NO X and PM 2.5 were in Central Region (CR). These results are meaningful for decision-makers to help provide more detailed vehicle pollution control measures in Foshan with a strip road network and only one ring road. Copyright © 2018 Elsevier Ltd. All rights reserved.

Cost of Crashes Related to Road Conditions, United States, 2006

PubMed Central

Zaloshnja, Eduard; Miller, Ted R.

2009-01-01

This is the first study to estimate the cost of crashes related to road conditions in the U.S. To model the probability that road conditions contributed to the involvement of a vehicle in the crash, we used 2000–03 Large Truck Crash Causation Study (LTCCS) data, the only dataset that provides detailed information whether road conditions contributed to crash occurrence. We applied the logistic regression results to a costed national crash dataset in order to calculate the probability that road conditions contributed to the involvement of a vehicle in each crash. In crashes where someone was moderately to seriously injured (AIS-2-6) in a vehicle that harmfully impacted a large tree or medium or large non-breakaway pole, or if the first harmful event was collision with a bridge, we changed the calculated probability of being road-related to 1. We used the state distribution of costs of fatal crashes where road conditions contributed to crash occurrence or severity to estimate the respective state distribution of non-fatal crash costs. The estimated comprehensive cost of traffic crashes where road conditions contributed to crash occurrence or severity was $217.5 billion in 2006. This represented 43.6% of the total comprehensive crash cost. The large share of crash costs related to road design and conditions underlines the importance of these factors in highway safety. Road conditions are largely controllable. Road maintenance and upgrading can prevent crashes and reduce injury severity. PMID:20184840

Managing environmental noise in Hong Kong

NASA Astrophysics Data System (ADS)

Li, Kai Ming

2004-05-01

Hong Kong is well known for its economic vibrancy and its hyper densely population: more than 7 million people living in a total area of slightly over 1000 square kilometers of hilly areas. Most of these people live and work in about 20% of the total land area, resulting in probably the highest densities in the world. The high population density is also matched by a large number of vehicles running in the roads. At present, there are over 400000 vehicles operating on a highway network less than 1000 km in length. With all these factors plus many urban activities associated with the rapid growth and development, noise is an important environmental issue in the city. Although there are many dimensions for the quality of life, the acoustic environment is undoubtedly an essential part of it, especially when the people's aspirations increase as the society develops. This paper summarizes the development of strategies for controlling environmental noise in Hong Kong in the past two decades. The current situation will be addressed and a proposal for an improved traffic noise policy will be presented. [Work supported by the Research Grants Council, and The Hong Kong Polytechnic University.

Intermediate Volatility Organic Compound Emissions from On-Road Diesel Vehicles: Chemical Composition, Emission Factors, and Estimated Secondary Organic Aerosol Production.

PubMed

Zhao, Yunliang; Nguyen, Ngoc T; Presto, Albert A; Hennigan, Christopher J; May, Andrew A; Robinson, Allen L

2015-10-06

Emissions of intermediate-volatility organic compounds (IVOCs) from five on-road diesel vehicles and one off-road diesel engine were characterized during dynamometer testing. The testing evaluated the effects of driving cycles, fuel composition and exhaust aftertreatment devices. On average, more than 90% of the IVOC emissions were not identified on a molecular basis, instead appearing as an unresolved complex mixture (UCM) during gas-chromatography mass-spectrometry analysis. Fuel-based emissions factors (EFs) of total IVOCs (speciated + unspeciated) depend strongly on aftertreatment technology and driving cycle. Total-IVOC emissions from vehicles equipped with catalyzed diesel particulate filters (DPF) are substantially lower (factor of 7 to 28, depending on driving cycle) than from vehicles without any exhaust aftertreatment. Total-IVOC emissions from creep and idle operations are substantially higher than emissions from high-speed operations. Although the magnitude of the total-IVOC emissions can vary widely, there is little variation in the IVOC composition across the set of tests. The new emissions data are combined with published yield data to investigate secondary organic aerosol (SOA) formation. SOA production from unspeciated IVOCs is estimated using surrogate compounds, which are assigned based on gas-chromatograph retention time and mass spectral signature of the IVOC UCM. IVOCs contribute the vast majority of the SOA formed from exhaust from on-road diesel vehicles. The estimated SOA production is greater than predictions by previous studies and substantially higher than primary organic aerosol. Catalyzed DPFs substantially reduce SOA formation potential of diesel exhaust, except at low speed operations.

Topographic and road control of mega-gullies in Kinshasa (DR Congo)

NASA Astrophysics Data System (ADS)

Makanzu Imwangana, Fils; Dewitte, Olivier; Ntombi, Médard; Moeyersons, Jan

2014-07-01

Diachronic mapping (1957, 1967, 2007 and 2010) shows an exponentially growing mega-gully network since roads were constructed through in the forests and plantations which occupied the sandy soils of the high town of Kinshasa. We found that the spatial occurrence of the mega-gullies (width ≥ 5 m) in this newly urbanized environment is controlled by two factors. First, there is a topographic control, given by the relation S = 0.00008A- 1.459, with S being the slope gradient (m m- 1) of the soil surface at the gully head and A the drainage area (ha) above the head. There is also a ‘road’ control, expressed by S = 22.991Lc- 1.999, with Lc being the cumulated length of roads in the basin above the gully head. The co-existence of both controls reflects the fact that the local sands are highly permeable and hence roads are more important generators of continuous runoff. The S-A relation noted above should not be applied outside the town where the road network is less dense. In contrast, the S-Lc relation may be used in both the town and rural areas underlain by porous soils where roads are the only generators of continuous runoff. We further conclude that the high town of Kinshasa is one of the most vulnerable places for gullying, and gullying can potentially transform the town into a badland. ‘Artisanal’ gully treatment is more successful than generally believed and the S-Lc relation can be a tool for mega-gully prevention.

Experimental study designs to improve the evaluation of road mitigation measures for wildlife.

PubMed

Rytwinski, Trina; van der Ree, Rodney; Cunnington, Glenn M; Fahrig, Lenore; Findlay, C Scott; Houlahan, Jeff; Jaeger, Jochen A G; Soanes, Kylie; van der Grift, Edgar A

2015-05-01

An experimental approach to road mitigation that maximizes inferential power is essential to ensure that mitigation is both ecologically-effective and cost-effective. Here, we set out the need for and standards of using an experimental approach to road mitigation, in order to improve knowledge of the influence of mitigation measures on wildlife populations. We point out two key areas that need to be considered when conducting mitigation experiments. First, researchers need to get involved at the earliest stage of the road or mitigation project to ensure the necessary planning and funds are available for conducting a high quality experiment. Second, experimentation will generate new knowledge about the parameters that influence mitigation effectiveness, which ultimately allows better prediction for future road mitigation projects. We identify seven key questions about mitigation structures (i.e., wildlife crossing structures and fencing) that remain largely or entirely unanswered at the population-level: (1) Does a given crossing structure work? What type and size of crossing structures should we use? (2) How many crossing structures should we build? (3) Is it more effective to install a small number of large-sized crossing structures or a large number of small-sized crossing structures? (4) How much barrier fencing is needed for a given length of road? (5) Do we need funnel fencing to lead animals to crossing structures, and how long does such fencing have to be? (6) How should we manage/manipulate the environment in the area around the crossing structures and fencing? (7) Where should we place crossing structures and barrier fencing? We provide experimental approaches to answering each of them using example Before-After-Control-Impact (BACI) study designs for two stages in the road/mitigation project where researchers may become involved: (1) at the beginning of a road/mitigation project, and (2) after the mitigation has been constructed; highlighting real case studies when available. Copyright © 2015 Elsevier Ltd. All rights reserved.

Logging residue in the Pacific Northwest: characteristics affecting utilization.

Treesearch

James O. Howard

1981-01-01

Information on the characteristics of logging residue in Idaho, Washington, and Oregon is presented. Tables show volume by diameter and length, number of pieces per acre, percent of residue that is sound, distribution by slope and distance to road, and average proportion of bark. Results are shown for 19 strata (harvest method by geographic area and owner).

Condition assessment and determination of methods for evaluating corrosion damage in piles encapsulated in protective jackets on the Hampton Roads Bridge-Tunnel.

DOT National Transportation Integrated Search

2010-04-01

The primary purpose of this study was to assess the condition of piles that had been encapsulated in fiberglass and mortar jackets on four bridges that are part of the Hampton Roads Bridge-Tunnel (HRBT). Since these four bridges contain a total of ap...

Evaluation of erosion control techniques on forest roads

Treesearch

Johnny M. Grace; Bob Rummer; Bryce J. Stokes; J. Wilhoit

1998-01-01

The cutslope and fillslope on a newly constructed forest road on the Talladega National Forest near Heflin, AL were treated with three erosion control techniques: wood excelsior erosion mat, native grass species, and exotic grass species. Bare soil plots were used as the experimental controls. Total sediment yield was measured during the period 21 September 1995 to 18...

Sediment production and downslope sediment transport from forest roads in granitic watersheds

Treesearch

Gary L. Ketcheson; Walter F. Megahan

1996-01-01

A mapping technique was used to measure the annual downslope deposition of granitic sediments eroded from forest roads on three headwater watersheds in the mountains of central Idaho. Frequency distributions were developed to determine sediment travel distance, and a dimensionless relationship was developed to describe the relation between the percentage of total...

Reducing fatalities and severe injuries on Florida's high-speed multi-lane arterial corridors : part I, preliminary severity analysis of driver crash involvements, final report, April 2009

DOT National Transportation Integrated Search

2009-04-28

Severe injury involvements on arterial roads account for a quarter of the total severe injuries reported statewide. Crash severity analysis was conducted and consisted of six road entity models and twenty crash type models. The data preparation and s...

25 CFR 170.600 - What must BIA include in the notice of availability of funds?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false What must BIA include in the notice of availability of... WATER INDIAN RESERVATION ROADS PROGRAM Service Delivery for Indian Reservation Roads Funding Process § 170.600 What must BIA include in the notice of availability of funds? (a) Upon receiving the total...

Get In and Get Out: Assessing Stream Sediment Loading from Short Duration Forest Harvest Operations and Rapid Haul Road Decommissioning.

NASA Astrophysics Data System (ADS)

Corrigan, A.; Silins, U.; Stone, M.

2016-12-01

Best management practices (BMPs) and associated erosion control measures for mitigating sediment impacts from forestry roads and road-stream crossings are well documented. While rapid road decommissioning after forestry operations may serve to limit broader impacts on sediment production in high value headwater streams, few studies have evaluated the combined effects of accelerated harvest operations and rapid retirement of logging roads and road-stream crossings on stream sediment. The objectives of this study were to evaluate the initial impacts of these strategies on fine sediment loading and fate during a short duration harvesting operation in 3 headwater sub-catchments in the southwestern Rocky Mountains of Alberta, Canada. A multi-pronged sampling approach (ISCOs, event focused grab sampling, continuous wash load sampling, and stream bed sediment intrusion measurements) was used to measure sediment loading and deposition in streambeds upstream and downstream of road-stream bridge crossings during harvest operations (2015) and after road and bridge crossing retirement (2016). Sediment production from forestry roads was generally much lower than has been reported from other studies in similar settings. Average total suspended solids (TSS) downstream of the bridge crossings were actually lower (-3.28 g/L; -0.704 g/L) than upstream of two bridge crossings while in-stream sediment sources contributed to elevated sediment downstream of a third road-stream crossing. Minimal in stream sediment impacts from forest harvest and road-stream crossings was likely a reflection of combined factors including a) employment of erosion control BMPs to roads and bridge crossings, b) rapid decommissioning of roads and crossings to limit exposure of linear land disturbance features, and c) drier El Niño climatic conditions during the study.

Using data mining techniques to predict the severity of bicycle crashes.

PubMed

Prati, Gabriele; Pietrantoni, Luca; Fraboni, Federico

2017-04-01

To investigate the factors predicting severity of bicycle crashes in Italy, we used an observational study of official statistics. We applied two of the most widely used data mining techniques, CHAID decision tree technique and Bayesian network analysis. We used data provided by the Italian National Institute of Statistics on road crashes that occurred on the Italian road network during the period ranging from 2011 to 2013. In the present study, the dataset contains information about road crashes occurred on the Italian road network during the period ranging from 2011 to 2013. We extracted 49,621 road accidents where at least one cyclist was injured or killed from the original database that comprised a total of 575,093 road accidents. CHAID decision tree technique was employed to establish the relationship between severity of bicycle crashes and factors related to crash characteristics (type of collision and opponent vehicle), infrastructure characteristics (type of carriageway, road type, road signage, pavement type, and type of road segment), cyclists (gender and age), and environmental factors (time of the day, day of the week, month, pavement condition, and weather). CHAID analysis revealed that the most important predictors were, in decreasing order of importance, road type (0.30), crash type (0.24), age of cyclist (0.19), road signage (0.08), gender of cyclist (0.07), type of opponent vehicle (0.05), month (0.04), and type of road segment (0.02). These eight most important predictors of the severity of bicycle crashes were included as predictors of the target (i.e., severity of bicycle crashes) in Bayesian network analysis. Bayesian network analysis identified crash type (0.31), road type (0.19), and type of opponent vehicle (0.18) as the most important predictors of severity of bicycle crashes. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Egyptian geomagnetic reference field to the Epoch, 2010.0

NASA Astrophysics Data System (ADS)

Deebes, H. A.; Abd Elaal, E. M.; Arafa, T.; Lethy, A.; El Emam, A.; Ghamry, E.; Odah, H.

2017-06-01

The present work is a compilation of two tasks within the frame of the project ;Geomagnetic Survey & Detailed Geomagnetic Measurements within the Egyptian Territory; funded by the ;Science and Technology Development Fund agency (STDF);. The National Research Institute of Astronomy and Geophysics (NRIAG), has conducted a new extensive land geomagnetic survey that covers the whole Egyptian territory. The field measurements have been done at 3212 points along all the asphalted roads, defined tracks, and ill-defined tracks in Egypt; with total length of 11,586 km. In the present work, the measurements cover for the first time new areas as: the southern eastern borders of Egypt including Halayeb and Shlatin, the Quattara depresion in the western desert, and the new roads between Farafra and Baharia oasis. Also marine geomagnetic survey have been applied for the first time in Naser lake. Misallat and Abu-Simble geomagnetic observatories have been used to reduce the field data to the Epoch 2010. During the field measurements, whenever possible, the old stations occupied by the previous observers have been re-occupied to determine the secular variations at these points. The geomagnetic anomaly maps, the normal geomagnetic field maps with their corresponding secular variation maps, the normal geomagnetic field equations of the geomagnetic elements (EGRF) and their corresponding secular variations equations, are outlined. The anomalous sites, as discovered from the anomaly maps are, only, mentioned. In addition, a correlation between the International Geomagnetic Reference Field (IGRF) 2010.0 and the Egyptian Geomagnetic Reference Field (EGRF) 2010 is indicated.

Effectiveness of Pavement Management System and its Effects to the Closing of Final Account in Construction Project in Malaysia

NASA Astrophysics Data System (ADS)

Zakaria, Zarabizan; Ismail, Syuhaida; Yusof, Aminah Md

2013-04-01

Federal roads maintenance needs a systematic and effective mechanism to ensure that the roads are in good condition and provide comfort to the road user. In implementing effective maintenance, budget is main the factor limiting this endeavor. Thus Public Works Department (PWD) Malaysia used Highway Development and Management (HDM-4) System to help the management of PWD Malaysia in determining the location and length of the road to be repaired according to the priority based on its analysis. For that purpose, PWD Malaysia has applied Pavement Management System (PMS) which utilizes HDM-4 as the analysis engine to conduct technical and economic analysis in generating annual work programs for pavement maintenance. As a result, a lot of feedback and comment have been received from Supervisory and Roads Maintenance Unit (UPPJ) Zonal on the accuracy of the system output and problems that arise in the closing of final account. Therefore, the objective of this paper is to evaluate current system accuracy in terms of generating the annual work program for periodic pavement maintenance, to identify factors contributing to the system inaccuracy in selecting the location and length of roads that require for treatment and to propose improvement measures for the system accuracy. The factors affecting the closing of final account caused by result received from the pavement management system are also defined. The scope of this paper is on the existing HDM-4 System which cover four states specifically Perlis, Selangor, Kelantan and Johor which is analysed via the work program output data for the purpose of evaluating the system accuracy. The method used in this paper includes case study, interview, discussion and analysis of the HDM-4 System output data. This paper has identified work history not updated and the analysis is not using the current data as factors contributing to the system accuracy. From the result of this paper, it is found that HDM-4's system accuracy used by PWD Malaysia attains average 65 per cent only and had not achieved level that had been set by PWD Malaysia namely 80 per cent. Hence, this paper has revealed the causes of the occurrances in the pavement management system in construction project in Malaysia and investigated the consequences of the late payments and final account problems confronted by contractors in Malaysia, which eventually proposed strategic actions that could be taken by the contractors in securing their payments.

Longer biopsy cores do not increase prostate cancer detection rate: A large-scale cohort study refuting cut-off values indicated in the literature

PubMed Central

Yılmaz, Hasan; Yavuz, Ufuk; Üstüner, Murat; Çiftçi, Seyfettin; Yaşar, Hikmet; Müezzinoğlu, Bahar; Uslubaş, Ali Kemal; Dillioğlugil, Özdal

2017-01-01

Objective Only a few papers in the literature aimed to evaluate biopsy core lengths. Additionally, studies evaluated the core length with different approaches. We aimed to determine whether prostate cancer (PCa) detection is affected from core lengths according to three different approaches in a large standard cohort and compare our cut-off values with the published cut-offs. Material and methods We retrospectively analyzed 1,523 initial consecutive transrectal ultrasound-guided 12-core prostate biopsies. Biopsies were evaluated with respect to total core length (total length of each patients’ core) average core length (total core length divided by total number of cores in each patient), and mean core length (mean length of all cores pooled), and compared our cut-off values with the published cut-offs. The prostate volumes were categorized into four groups (<30, 30–59.99, 60–119.99, ≥120 cm3) and PCa detection rates in these categories were examined. Results PCa was found in 41.5% patients. There was no difference between benign and malignant mean core lengths of the pooled cores (p>0.05). Total core length and average core length were not significantly associated with PCa in multivariate logistic regression analyses (p>0.05). The core lengths (mean, average and total core lengths) increased (p<0.001) and PCa rates decreased (p<0.001) steadily with increasing prostate volume categories. PCa percentages decreased in all categories above the utilized cut-offs for mean (p>0.05), average (p<0.05), and total core lengths (p>0.05). Conclusion There was no difference between mean core lengths of benign and malignant cores. Total core length and average core length were not significantly associated with PCa. Contrary to the cut-offs used for mean and average core lengths in the published studies, PCa rates decrease as these core lengths increase. Larger studies are necessary for the determination and acceptance of accurate cut-offs. PMID:28861301

Chemical and ecological effects of contaminated tunnel wash water runoff to a small Norwegian stream.

PubMed

Meland, Sondre; Borgstrøm, Reidar; Heier, Lene Sørlie; Rosseland, Bjørn Olav; Lindholm, Oddvar; Salbu, Brit

2010-09-01

Cleaning and washing of road tunnels are routinely performed and large volumes of contaminated wash water are often discharged into nearby recipients. In the present study, traffic related contaminants were quantified in tunnel wash water (the Nordby tunnel, Norway) discharged from a sedimentation pond to a nearby small stream, Arungselva. In situ size and charge fractionation techniques were applied to quantify traffic related metal species, while PAHs were quantified in total samples. All metals and several PAHs appeared at elevated concentrations in the discharged wash water compared with concentrations measured in Arungselva upstream the pond outlet, and to concentrations measured in the pond outlet before the tunnel wash event. In addition, several contaminants (e.g. Cu, Pb, Zn, fluoranthene, pyrene) exceeded their corresponding EQS. PAH and metals like Al, Cd, Cr, Cu, Fe and Pb were associated with particles and colloids, while As, Ca, K, Mg, Mo, Ni, Sb and Zn were more associated with low molecular mass species (<10kDa). Calculated enrichment factors revealed that many of the metals were derived from anthropogenic sources, originating most likely from wear of tires (Zn), brakes (Cu and Sb), and from road salt (Na and Cl). The enrichment factors for Al, Ba, Ca, Cr, Fe, K, Mg and Ni were low, suggesting a crustal origin, e.g. asphalt wear. Based on calculated PAH ratios, PAH seemed to originate from a mixture of sources such as wear from tires, asphalt and combustion. Finally, historical fish length measurement data indicates that the fish population in the receiving stream Arungselva may have been adversely influenced by the chemical perturbations in runoffs originating from the nearby roads and tunnels during the years, as the growth in summer old sea trout (Salmo trutta L.) in downstream sections of the stream is significantly reduced compared to the upstream sections. Copyright 2010 Elsevier B.V. All rights reserved.

Effectiveness of an improved road safety policy in Ethiopia: an interrupted time series study.

PubMed

Abegaz, Teferi; Berhane, Yemane; Worku, Alemayehu; Assrat, Abebe

2014-05-31

In recent years, there has been an increasing interest in implementing road safety policy by different low income countries. However; the evidence is scarce on its success in the reduction of crashes, injuries and deaths. This study was conducted to assess whether road crashes, injuries and fatalities was reduced following the road safety regulation introduced as of September 2007 by Oromia Regional State Transport Bureau. Routine road traffic accident data for the year 2002-2011were collected from sixteen traffic police offices. Data on average daily vehicle flow was obtained from the Ethiopian Road Authority. Interrupted time series design using segmented linear regression model was applied to estimate the effect of an improved road safety policy. A total of 4,053 crashes occurred on Addis Ababa - Adama/Hawassa main road. Of these crashes, almost half 46.4% (1,880) were property damage, 29.4% (1,193) were fatal and 24.2% (980) injury crashes, resulting 1,392 fatalities and 1,749 injuries. There were statistically significant reductions in non-injury crashes and deaths. Non-injury crash was reduced by 19% and fatality by 12.4% in the first year of implementing the revised transport safety regulation. Although revised road safety policy helped in reducing motor vehicle crashes and associated fatalities, the overall incidence rate is still very high. Further action is required to avoid unnecessary loss of lives.

Detection of visually unrecognizable braking tracks using Laser-Induced Breakdown Spectroscopy, a feasibility study

NASA Astrophysics Data System (ADS)

Prochazka, David; Bilík, Martin; Prochazková, Petra; Brada, Michal; Klus, Jakub; Pořízka, Pavel; Novotný, Jan; Novotný, Karel; Ticová, Barbora; Bradáč, Albert; Semela, Marek; Kaiser, Jozef

2016-04-01

Identification of the position, length and mainly beginning of a braking track has proven to be essential for determination of causes of a road traffic accident. With the introduction of modern safety braking systems and assistance systems such as the Anti-lock Braking System (ABS) or Electronic Stability Control (ESC), the visual identification of braking tracks that has been used up until the present is proving to be rather complicated or even impossible. This paper focuses on identification of braking tracks using a spectrochemical analysis of the road surface. Laser-Induced Breakdown Spectroscopy (LIBS) was selected as a method suitable for fast in-situ element detection. In the course of detailed observations of braking tracks it was determined that they consist of small particles of tire treads that are caught in intrusions in the road surface. As regards detection of the "dust" resulting from wear and tear of tire treads in the environment, organic zinc was selected as the identification element in the past. The content of zinc in tire treads has been seen to differ with regard to various sources and tire types; however, the arithmetic mean and modus of these values are approximately 1% by weight. For in-situ measurements of actual braking tracks a mobile LIBS device equipped with a special module was used. Several measurements were performed for 3 different cars and tire types respectively which slowed down with full braking power. Moreover, the influence of different initial speed, vehicle mass and braking track length on detected signal is discussed here.

Road networks predict human influence on Amazonian bird communities

PubMed Central

Ahmed, Sadia E.; Lees, Alexander C.; Moura, Nárgila G.; Gardner, Toby A.; Barlow, Jos; Ferreira, Joice; Ewers, Robert M.

2014-01-01

Road building can lead to significant deleterious impacts on biodiversity, varying from direct road-kill mortality and direct habitat loss associated with road construction, to more subtle indirect impacts from edge effects and fragmentation. However, little work has been done to evaluate the specific effects of road networks and biodiversity loss beyond the more generalized effects of habitat loss. Here, we compared forest bird species richness and composition in the municipalities of Santarém and Belterra in Pará state, eastern Brazilian Amazon, with a road network metric called ‘roadless volume (RV)’ at the scale of small hydrological catchments (averaging 3721 ha). We found a significant positive relationship between RV and both forest bird richness and the average number of unique species (species represented by a single record) recorded at each site. Forest bird community composition was also significantly affected by RV. Moreover, there was no significant correlation between RV and forest cover, suggesting that road networks may impact biodiversity independently of changes in forest cover. However, variance partitioning analysis indicated that RV has partially independent and therefore additive effects, suggesting that RV and forest cover are best used in a complementary manner to investigate changes in biodiversity. Road impacts on avian species richness and composition independent of habitat loss may result from road-dependent habitat disturbance and fragmentation effects that are not captured by total percentage habitat cover, such as selective logging, fire, hunting, traffic disturbance, edge effects and road-induced fragmentation. PMID:25274363

[Research on evaluation of water quality of Beijing urban stormwater runoff].

PubMed

Hou, Pei-Qiang; Ren, Yu-Fen; Wang, Xiao-Ke; Ouyang, Zhi-Yun; Zhou, Xiao-Ping

2012-01-01

The natural rainwater and stormwater runoff samples from three underlying surfaces (rooftop, campus road and ring road) were sampled and analyzed from July to October, 2010 in Beijing. Eight rainfall events were collected totally and thirteen water quality parameters were measured in each event. Grey relationship analysis and principal component analysis were applied to assess composite water quality and identify the main pollution sources of stormwater runoff. The results show that the composite water quality of ring road runoff is mostly polluted, and then is rooftop runoff, campus road runoff and rainwater, respectively. The composite water quality of ring road runoff is inferior to V class of surface water, while rooftop runoff, campus road runoff and rainwater are in II class of surface water. The mean concentration of TN and NH4(+)-N in rainwater and runoff is 5.49-11.75 mg x L(-1) and 2.90-5.67 mg x L(-1), respectively, indicating that rainwater and runoff are polluted by nitrogen (N). Two potential pollution sources are identified in ring road runoff: (1) P, SS and organic pollutant are possibly related to debris which is from vehicle tyre and material of ring road; (2) N and dissolved metal have relations with automobile exhaust emissions and bulk deposition.

New optimization strategies of pavement maintenance: A case study for national road network in Indonesia using integrated road management system

NASA Astrophysics Data System (ADS)

Hamdi, Hadiwardoyo, Sigit P.; Correia, A. Gomes; Pereira, Paulo

2017-06-01

A road network requires timely maintenance to keep the road surface in good condition onward better services to improve accessibility and mobility. Strategies and maintenance techniques must be chosen in order to maximize road service level through cost-effective interventions. This approach requires an updated database, which the road network in Indonesia is supported by a manual and visual survey, also using NAASRA profiler. Furthermore, in this paper, the deterministic model of deterioration was used. This optimization model uses life cycle cost analysis (LCCA), applied in an integrated manner, using IRI indicator, and allows determining the priority of treatment, type of treatment and its relation to the cost. The purpose of this paper was focussed on the aspects of road maintenance management, i.e., maintenance optimization models for different levels of traffic and various initial of road distress conditions on the national road network in Indonesia. The implementation of Integrated Road Management System (IRMS) can provide a solution to the problem of cost constraints in the maintenance of the national road network. The results from this study found that as the lowest as agency cost, it will affect the increasing of user cost. With the achievement of the target plan scenario Pl000 with initial value IRI 2, it was found that the routine management throughout the year and in early reconstruction and periodic maintenance with a 30 mm thick overlay, will simultaneously provide a higher net benefit value and has the lowest total cost of transportation.

[Research on spatial differentiation of urban stormwater runoff quality by source area monitoring].

PubMed

Li, Li-Qing; Zhu, Ren-Xiao; Guo, Shu-Gang; Yin, Cheng-Qing

2010-12-01

Runoff samples were collected from 14 source areas in Hanyang district during four rain events in an attempt to investigate the spatial differentiation and influencing factors of urban stormwater runoff quality. The outcomes are expected to offer practical guidance in sources control of urban runoff pollution. The results revealed that particle-bound proportion of chemical oxygen demand (COD), total nitrogen (TN), and total phosphorus (TP) in stormwater runoff were 58% +/- 17%, 65% +/- 13% and 92% +/- 6%, respectively. The fractions of ammonia, nitrate and dissolved organic nitrogen were homogeneous in dissolved nitrogen composition. Urban surface function, traffic volume, land use, population density, and street sweeping practice are the main factors determining spatial differentiation of urban surface runoff quality. The highest magnitude of urban stormwater runoff pollution was expected in the old urban residential area, followed by general residential with restaurants, commercial and transport area, new developments and green land. In addition, the magnitude of road stormwater runoff pollution is positively correlated to traffic volume, in the following order: the first trunk road > the second trunk road > minor road. Street sweeping and critical source areas controls should be implemented to mitigate the adverse effects of urban stormwater runoff on receive waters.

Driving Errors in Parkinson’s Disease: Moving Closer to Predicting On-Road Outcomes

PubMed Central

Brumback, Babette; Monahan, Miriam; Malaty, Irene I.; Rodriguez, Ramon L.; Okun, Michael S.; McFarland, Nikolaus R.

2014-01-01

Age-related medical conditions such as Parkinson’s disease (PD) compromise driver fitness. Results from studies are unclear on the specific driving errors that underlie passing or failing an on-road assessment. In this study, we determined the between-group differences and quantified the on-road driving errors that predicted pass or fail on-road outcomes in 101 drivers with PD (mean age = 69.38 ± 7.43) and 138 healthy control (HC) drivers (mean age = 71.76 ± 5.08). Participants with PD had minor differences in demographics and driving habits and history but made more and different driving errors than HC participants. Drivers with PD failed the on-road test to a greater extent than HC drivers (41% vs. 9%), χ2(1) = 35.54, HC N = 138, PD N = 99, p < .001. The driving errors predicting on-road pass or fail outcomes (95% confidence interval, Nagelkerke R2 =.771) were made in visual scanning, signaling, vehicle positioning, speeding (mainly underspeeding, t(61) = 7.004, p < .001, and total errors. Although it is difficult to predict on-road outcomes, this study provides a foundation for doing so. PMID:24367958

Characteristics of the road and surrounding environment in metropolitan shopping strips: association with the frequency and severity of single-vehicle crashes.

PubMed

Stephan, Karen L; Newstead, Stuart V

2014-01-01

Modeling crash risk in urban areas is more complicated than in rural areas due to the complexity of the environment and the difficulty obtaining data to fully characterize the road and surrounding environment. Knowledge of factors that impact crash risk and severity in urban areas can be used for countermeasure development and the design of risk assessment tools for practitioners. This research aimed to identify the characteristics of the road and roadside, surrounding environment, and sociodemographic factors associated with single-vehicle crash (SVC) frequency and severity in complex urban environments, namely, strip shopping center road segments. A comprehensive evidence-based list of data required for measuring the influence of the road, roadside, and other factors on crash risk was developed. The data included a broader range of factors than those traditionally considered in accident prediction models. One hundred and forty-two strip shopping segments located on arterial roads in metropolitan Melbourne, Australia, were identified. Police-reported casualty data were used to determine how many SVC occurred on the segments between 2005 and 2009. Data describing segment characteristics were collected from a diverse range of sources; for example, administrative government databases (traffic volume, speed limit, pavement condition, sociodemographic data, liquor licensing), detailed maps, on-line image sources, and digital images of arterial roads collected for the Victorian state road authority. Regression models for count data were used to identify factors associated with SVC frequency. Logistic regression was used to determine factors associated with serious and fatal outcomes. One hundred and seventy SVC occurred on the 142 selected road segments during the 5-year study period. A range of factors including traffic exposure, road cross section (curves, presence of median), road type, requirement for sharing the road with other vehicle types (trams and bicycles), roadside poles, and local amenities were associated with SVC frequency. A different set of risk factors was associated with the odds of a crash leading to a severe outcome: segment length, road cross section (curves, carriageway width), pavement condition, local amenities and vehicle, and driver factors. The presence of curves was the only factor associated with both SVC frequency and severity. A range of risk factors were associated with SVC frequency and severity in complex urban areas (metropolitan shopping strips), including traditionally studied characteristics such as traffic density and road design but also less commonly studied characteristics such as local amenities. Future behavioral research is needed to further investigate how and why these factors change the risk and severity of crashes before effective countermeasures can be developed.

Road traffic emission factors for heavy metals

NASA Astrophysics Data System (ADS)

Johansson, Christer; Norman, Michael; Burman, Lars

Quantifying the emissions and concentrations of heavy metals in urban air is a prerequisite for assessing their health effects. In this paper a combination of measurements and modelling is used to assess the contribution from road traffic emissions. Concentrations of particulate heavy metals in air were measured simultaneously during 1 year at a densely trafficked street and at an urban background site in Stockholm, Sweden. Annual mean concentrations of cadmium were 50 times lower than the EU directive and for nickel and arsenic concentrations were 10 and six times lower, respectively. More than a factor of two higher concentrations was in general observed at the street in comparison to roof levels indicating the strong influence from local road traffic emissions. The only compound with a significantly decreasing trend in the urban background was Pb with 9.1 ng m -3 in 1995/96 compared to 3.4 ng m -3 2003/04. This is likely due to decreased emissions from wear of brake linings and reduced emissions due to oil and coal combustion in central Europe. Total road traffic emission factors for heavy metals were estimated using parallel measurements of NOx concentrations and knowledge of NOx emission factors. In general, the emission factors for the street were higher than reported in road tunnel measurements. This could partly be due to different driving conditions, since especially for metals which are mainly emitted from brake wear, more stop and go driving in the street compared to in road tunnels is likely to increase emissions. Total emissions were compared with exhaust emissions, obtained from the COPERT model and brake wear emissions based on an earlier study in Stockholm. For Cu, Ni and Zn the sum of brake wear and exhaust emissions agreed very well with estimated total emission factors in this study. More than 90% of the road traffic emissions of Cu were due to brake wear. For Ni more than 80% is estimated to be due to exhaust emissions and for Zn around 40% of road traffic emissions are estimated to be due to exhaust emissions. Pb is also mainly due to exhaust emissions (90%); a fuel Pb content of only 0.5 mg L -1 would give similar emission factor as that based on the concentration increment at the street. This is the first study using simultaneous measurements of heavy metals at street and roof enabling calculations of emission factors using a tracer technique.

Multiscale physics of rubber-ice friction

NASA Astrophysics Data System (ADS)

Tuononen, Ari J.; Kriston, András; Persson, Bo

2016-09-01

Ice friction plays an important role in many engineering applications, e.g., tires on icy roads, ice breaker ship motion, or winter sports equipment. Although numerous experiments have already been performed to understand the effect of various conditions on ice friction, to reveal the fundamental frictional mechanisms is still a challenging task. This study uses in situ white light interferometry to analyze ice surface topography during linear friction testing with a rubber slider. The method helps to provide an understanding of the link between changes in the surface topography and the friction coefficient through direct visualization and quantitative measurement of the morphologies of the ice surface at different length scales. Besides surface polishing and scratching, it was found that ice melts locally even after one sweep showing the refrozen droplets. A multi-scale rubber friction theory was also applied to study the contribution of viscoelasticity to the total friction coefficient, which showed a significant level with respect to the smoothness of the ice; furthermore, the theory also confirmed the possibility of local ice melting.

Visualization of Circuit Card EM Fields.

DTIC Science & Technology

1998-03-31

0.010 - Photoimageable (Min.): 0.005 «Located at 7845 -J Airpark Road; Gaithersburg, Maryland 20879. 301-977-0303, http://www.capitalelectro.com...rlabelC«’); tit-. Ch .3SO; print -dep« fig_conn.h36.ep«; fignre; X differential node rel.diff_vec-0; h_vec«0.6:0.2:6.0; len_h«length(h_ve_); for i

PERSPECTIVE WITH WEST PORTAL. THE BRIDGE IS CLAD IN HORIZONTAL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PERSPECTIVE WITH WEST PORTAL. THE BRIDGE IS CLAD IN HORIZONTAL CLAPBOARD SIDING AND HAS A SHEET METAL ROOF. NOTE THE TWO OPENINGS THAT RUN THE LENGTH OF THE BRIDGE; ONE IS AT THE EAVES AND THE OTHER IS ABOUT 4’ ABOVE THE DECK. - Dreibelbis Station Bridge, Spanning Maiden Creek, Balthaser Road (TR 745), Lenhartsville, Berks County, PA

A user guide for the sign sizing program

Treesearch

Donna Sheehy; Kurt Krueger

1999-01-01

This user guide explains how to use the Forest Service Sign Sizing program. The program calculates the length and height of a rectangular sign panel for road and trail guide signs. Variable text messages and directional arrows can be mocked up using U.S. Federal Highway Administration standards. Users can make text or other changes and quickly determine the effect on...

Effectiveness of light-reflecting devices: A systematic reanalysis of animal-vehicle collision data.

PubMed

Brieger, Falko; Hagen, Robert; Vetter, Daniela; Dormann, Carsten F; Storch, Ilse

2016-12-01

Every year, approximately 500 human fatalities occur due to animal-vehicle collisions in the United States and Europe. Especially heavy-bodied animals affect road safety. For more than 50 years, light-reflecting devices such as wildlife warning reflectors have been employed to alert animals to traffic when crossing roads during twilight and night. Numerous studies addressed the effectiveness of light-reflecting devices in reducing collisions with animals in past decades, but yielded contradictory results. In this study, we conducted a systematic literature review to investigate whether light-reflecting devices contribute to an effective prevention of animal-vehicle collisions. We reviewed 53 references and reanalyzed original data of animal-vehicle collisions with meta-analytical methods. We calculated an effect size based on the annual number of animal-vehicle collisions per kilometer of road to compare segments with and without the installation of light-reflecting devices for 185 roads in Europe and North America. Our results indicate that light-reflecting devices did not significantly reduce the number of animal-vehicle collisions. However, we observed considerable differences of effect sizes with respect to study duration, study design, and country. Our results suggest that length of the road segment studied, study duration, study design and public attitude (preconception) to the functioning of devices may affect whether the documented number of animal-vehicle collisions in- or decrease and might in turn influence whether results obtained were published. Copyright © 2016 Elsevier Ltd. All rights reserved.

Contact stiffness considerations when simulating tyre/road noise

NASA Astrophysics Data System (ADS)

Winroth, Julia; Kropp, Wolfgang; Hoever, Carsten; Höstmad, Patrik

2017-11-01

Tyre/road simulation tools that can capture tyre vibrations, rolling resistance and noise generation are useful for understanding the complex processes that are involved and thereby promoting further development and optimisation. The most detailed tyre/road contact models use a spatial discretisation of the contact and assume an interfacial stiffness to account for the small-scale roughness within the elements. This interfacial stiffness has been found to have a significant impact on the simulated noise emissions but no thorough investigations of this sensitivity have been conducted. Three mechanisms are thought to be involved: The horn effect, the modal composition of the vibrational field of the tyre and the contact forces exciting the tyre vibrations. This study used a numerical tyre/road noise simulation tool based on physical relations to investigate these aspects. The model includes a detailed time-domain contact model with linear or non-linear contact springs that accounts for the effect of local tread deformation on smaller length scales. Results confirm that an increase in contact spring stiffness causes a significant increase of the simulated tyre/road noise. This is primarily caused by a corresponding increase in the contact forces, resulting in larger vibrational amplitudes. The horn effect and the modal composition are relatively unaffected and have minor effects on the radiated noise. A more detailed non-linear contact spring formulation with lower stiffness at small indentations results in a reduced high-frequency content in the contact forces and the simulated noise.

Analysis of traffic congestion induced by the work zone

NASA Astrophysics Data System (ADS)

Fei, L.; Zhu, H. B.; Han, X. L.

2016-05-01

Based on the cellular automata model, a meticulous two-lane cellular automata model is proposed, in which the driving behavior difference and the difference of vehicles' accelerations between the moving state and the starting state are taken into account. Furthermore the vehicles' motion is refined by using the small cell of one meter long. Then accompanied by coming up with a traffic management measure, a two-lane highway traffic model containing a work zone is presented, in which the road is divided into normal area, merging area and work zone. The vehicles in different areas move forward according to different lane changing rules and position updating rules. After simulation it is found that when the density is small the cluster length in front of the work zone increases with the decrease of the merging probability. Then the suitable merging length and the appropriate speed limit value are recommended. The simulation result in the form of the speed-flow diagram is in good agreement with the empirical data. It indicates that the presented model is efficient and can partially reflect the real traffic. The results may be meaningful for traffic optimization and road construction management.

A modified 3D algorithm for road traffic noise attenuation calculations in large urban areas.

PubMed

Wang, Haibo; Cai, Ming; Yao, Yifan

2017-07-01

The primary objective of this study is the development and application of a 3D road traffic noise attenuation calculation algorithm. First, the traditional empirical method does not address problems caused by non-direct occlusion by buildings and the different building heights. In contrast, this study considers the volume ratio of the buildings and the area ratio of the projection of buildings adjacent to the road. The influence of the ground affection is analyzed. The insertion loss due to barriers (infinite length and finite barriers) is also synthesized in the algorithm. Second, the impact of different road segmentation is analyzed. Through the case of Pearl River New Town, it is recommended that 5° is the most appropriate scanning angle as the computational time is acceptable and the average error is approximately 3.1 dB. In addition, the algorithm requires only 1/17 of the time that the beam tracking method requires at the cost of more imprecise calculation results. Finally, the noise calculation for a large urban area with a high density of buildings shows the feasibility of the 3D noise attenuation calculation algorithm. The algorithm is expected to be applied in projects requiring large area noise simulations. Copyright © 2017 Elsevier Ltd. All rights reserved.

Road network - land use interaction model: Malang City in Indonesian case

NASA Astrophysics Data System (ADS)

Waloejo, B. S.

2017-06-01

Urban population in Indonesia is significantly increasing from 44% of total population in 2002 to approximately 60% in 2015. Rapid population growth has resulted in rapid urban land use changes. The problems became more complicated since the changes created mixed use development along the main urban corridors that resulted in higher trip generation and attraction while urban land very limited that made road widening and creation of new road less possible. This led to an accumulation of movement, worse road’s level of service and congestion in the main urban corridor. The aims of the research are to analyse trip generation/attraction of the mixed- land uses of the main corridors Malang City; and to formulate road network - land use interaction model in the case of Malang (a nearly 1 million population city in 2015). The selected corridors in Malang City a main road in the west district of Malang City - Indonesia. Correlational method (Pearson Product Moment) and regression method (stepwise, anova for land use’s trip generation/attraction), and analysis of road’s level of service (LOS), using Indonesian Road Capacity Manual, are employed in this research. The research formulated the interaction model as: \\begin{eqnarray}\\begin{array}{lll}{V}{total} & = & \\displaystyle \\sum {V}{internal}+\\displaystyle \\sum {V}{external} {Where}\\ \\displaystyle \\sum {V}{internal} & = & {e}{residential}{Y}{residential}+{e}{schools}{Y}{schools}+{e}{unis}{Y}{unis}+{e}{offices}{Y}{offices}+{e}{hospital}{Y}{hospital}+{e}{chemists}{Y}{chemists}+{e}{commercial}{Y}{commercial}+{e}{market}{Y}{market}+{e}{fuel {station}}{Y}{fuel {station}}+{e}{bus {station}}{Y}{bus {station}} {and}\\ \\displaystyle \\sum {V}{external} & = & \\displaystyle \\sum {V}{local {roads}}+{V}{continous {traffic} {flow}}\\end{array}\\end{eqnarray} The research showed that V_total=23,033 car unit/day (internal) + 32,746 car unit/day (external) = 55,779 car unit/day. The trip higher than the road’s capacity (C) which 40.695 car unit/day. The levels of services of road’s segments dominantly F (congested). The simulation of the model showed that traffic engineering can be used to increase road’s capacity while land use changes (reduction of the variety of mixed land uses), particularly mix land uses at frontage area, can improve level of services (from F to C).

Dynamic linkages between road transport energy consumption, economic growth, and environmental quality: evidence from Pakistan.

PubMed

Danish; Baloch, Muhammad Awais

2018-03-01

The focus of the present research work is to investigate the dynamic relationship between economic growth, road transport energy consumption, and environmental quality. To this end, we rely on time series data for the period 1971 to 2014 in the context of Pakistan. To use sulfur dioxide (SO 2 ) emission from transport sector as a new proxy for measuring environmental quality, the present work employs time series technique ARDL which allows energy consumption from the transport sector, urbanization, and road infrastructure to be knotted by symmetric relationships with SO 2 emissions and economic growth. From the statistical results, we confirm that road infrastructure boosts economic growth. Simultaneously, road infrastructure and urbanization hampers environmental quality and causes to accelerate emission of SO 2 in the atmosphere. Furthermore, economic growth has a diminishing negative impact on total SO 2 emission. Moreover, we did not find any proof of the expected role of transport energy consumption in SO 2 emission. The acquired results directed that care should be taken in the expansion of road infrastructure and green city policies and planning are required in the country.

Black carbon emissions from diesel sources in Russia. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kholod, Nazar; Evans, Meredydd

This report presents a detailed inventory of Russian BC emissions from diesel sources. Drawing on a complete Russian vehicle registry with detailed information about vehicle types and emission standards, this report analyzes BC emissions from diesel on-road vehicles. On-road diesel vehicles emitted 21 Gg of BC in 2014: heavy-duty trucks account for 60% of the on-road BC emissions, while cars represent only 5% (light commercial vehicles and buses account for the remainder). Using Russian activity data and fuel-based emission factors, the report also presents BC emissions from diesel locomotives and ships, off-road engines in industry, construction and agriculture, and generators.more » The total emissions from diesel sources in Russia are estimated to be 49 Gg of BC in 2014.« less

Influence of Excessive Moisture in the Subgrade on the Durability and Load-Bearing Capacity of Road Pavements

NASA Astrophysics Data System (ADS)

Mieczkowski, P.; Budziński, B.

2018-05-01

When well performed, pavement renewal or alteration shall ensure the desired properties of the road during the assumed period of operation. Presence of water in the subgrade can be one of the main factors affecting the structural capacity of pavement and can result in cracking of the bituminous layers, even after a very short period of trafficking. Reconstruction of one of regional roads in Poland has been chosen to serve as an example of inappropriate approach to the problem of the presence of water in the road structure. The project included construction of new layers of pavement and increasing the design life of the whole pavement structure to 4.06 million ESAL of 100 kN (as per the Standard Catalogue of Typical Flexible and Semi-rigid Road Pavement Structures, issue of 1997). After a relatively short period of trafficking (3-5 years) localised alligator cracking appeared on the surface along with structural deformations. The pavement condition assessment including FWD tests was carried out to reveal excessive deflections (over 500 μm) which classify the road for renewal. The analysis of data showed that the main cause of distress was softening of the subgrade caused by an ingress of precipitation water under the pavement layers through the roadway and shoulder edges. The deficiencies of the performed reconstruction occurred both in the roadway (including small step-outs in the cement-treated layer) and partly in the shoulders where the existing soil was in places replaced with impervious material, with the existing (cohesive) material left in place on a major part of the overall length.

Evidence of Human Induce Factors in Automotive Crashes in Nigeria

PubMed Central

Abidemi, Awopeju K.

2013-01-01

Nigeria is one of the countries in Africa highly affected by automotive crashes which led to establishment of Federal Road Safety Corps (FRSC). The organization fought and is fighting against reckless driving in the country to prevent loss of life through automotive crashes. The record of the organization and the Statistical investigation of the researcher reveal that most of the crashes were due to human error such as alcoholism, inexperience and peer influence on the high-way. The data for the research was collected from published report of FRSC 2012 and analyzed using chi-square dependency test and charts due to the nature of the presentation. Ratios were used to determine Number of people killed per Road Total Crashes (RTC), Casualty per RTC and RTC severity Index from 2007 to 2010 in the country. Among the human induced factors, it was discovered that most of the drivers involved in road crashes were drunk during the period and the years of experience play major role in the automotive crashes as drivers with less than 2years of experience were more involved than the other groups. In the consideration of life style of drivers involve in road crashes, it was discovered that drivers with less than 30years of age are vulnerable to road crashes than drivers with ages higher than 30years. Among the findings, the most common automobile in Nigeria road crashes is commercial buses in the years considered. It was recommended that proper and adequate training should be given to drivers on the high-way to prevent injuries and loss of life. Alcoholism should be discouraged in totality and age of obtaining drivers license could be increased in developing countries such as Nigeria. PMID:24406969

Cation exchange in a glacial till drumlin at a road salt storage facility

NASA Astrophysics Data System (ADS)

Ostendorf, David W.; Xing, Baoshan; Kallergis, Niki

2009-05-01

We use laboratory and field data to calibrate existing geochemical and transport models of cation exchange induced by contamination of an unconfined aquifer at a road salt storage facility built upon a glacial till drumlin in eastern Massachusetts. A Gaines and Thomas selectivity coefficient K models the equilibrium sodium and divalent cation distribution in the groundwater and solid matrix, while an existing method of characteristics model describes the advective transport of total dissolved cations and sorbed sodium. Laboratory isotherms of split spoon soil samples from the drumlin calibrate K with an average value of 0.0048 (L/g) 1/2 for a measured cation exchange capacity of 0.057 meq/g dry soil. Ten years of monitoring well data document groundwater flow and the advection of conservative chloride due to outdoor storage and handling of road salt at the site. The monitoring well cation data and retarded transport model offer an independent K calibration of 0.0040 to 0.0047 (L/g) 1/2: the consistency of the field and laboratory selectivity coefficient calibrations endorse this application of the Gaines and Thomas and method of characteristics models. The advancing deicing agent plume releases divalent cations from the till into the groundwater, so that monitoring well samples do not reflect the chemical composition of the road salt. In this regard, dissolved divalent cation milliequivalent concentrations are as high as 80% of the total dissolved cationic concentrations in the salt contaminated monitoring well samples, far greater than their 2.5% level in the road salt stored at the site. Cation exchange can thus obscure attempts to hindcast stored road salt sodium water table concentration from monitoring well sample stoichiometry, or to predict sodium impacts on groundwater or receiving stream quality downgradient of the well.

Cation exchange in a glacial till drumlin at a road salt storage facility.

PubMed

Ostendorf, David W; Xing, Baoshan; Kallergis, Niki

2009-05-12

We use laboratory and field data to calibrate existing geochemical and transport models of cation exchange induced by contamination of an unconfined aquifer at a road salt storage facility built upon a glacial till drumlin in eastern Massachusetts. A Gaines and Thomas selectivity coefficient K models the equilibrium sodium and divalent cation distribution in the groundwater and solid matrix, while an existing method of characteristics model describes the advective transport of total dissolved cations and sorbed sodium. Laboratory isotherms of split spoon soil samples from the drumlin calibrate K with an average value of 0.0048 (L/g)(1/2) for a measured cation exchange capacity of 0.057 meq/g dry soil. Ten years of monitoring well data document groundwater flow and the advection of conservative chloride due to outdoor storage and handling of road salt at the site. The monitoring well cation data and retarded transport model offer an independent K calibration of 0.0040 to 0.0047 (L/g)(1/2): the consistency of the field and laboratory selectivity coefficient calibrations endorse this application of the Gaines and Thomas and method of characteristics models. The advancing deicing agent plume releases divalent cations from the till into the groundwater, so that monitoring well samples do not reflect the chemical composition of the road salt. In this regard, dissolved divalent cation milliequivalent concentrations are as high as 80% of the total dissolved cationic concentrations in the salt contaminated monitoring well samples, far greater than their 2.5% level in the road salt stored at the site. Cation exchange can thus obscure attempts to hindcast stored road salt sodium water table concentration from monitoring well sample stoichiometry, or to predict sodium impacts on groundwater or receiving stream quality downgradient of the well.

Efficiency of erosion mitigation strategies in reducing sediment-loading rates from unpaved road networks into coral reef-bearing waters of the Eastern Caribbean

NASA Astrophysics Data System (ADS)

Ramos-Scharron, Carlos; Gray, Sarah; Sears, Whitney

2014-05-01

Erosion from unpaved road networks represents a critical source of stress affecting the coral reef systems of the U.S. Virgin Islands in the Northeastern Caribbean. Combined community- and government-driven efforts to reduce sediment contributions from unpaved roads in the island of St. John have consisted in improving road drainage design, paving selected road segments, and constructing sediment retention structures. Here we describe empirical evidence attesting to the efficacy of these mitigation efforts. Road drainage improvements reduced sediment production rates to about a third of pre-treatment levels. Road-segment scale erosion rates following paving ranged from 5-30% of pre-treatment levels, depending on road slope and road grading frequency. A 616-m3 sediment retention pond proved to contain 86 Mg of sediment annually and about 94% of the runoff generated from a 12 ha sub-catchment with an unpaved road density of 19 km km-2. Watershed-scale modeling evaluations suggested that the combination of these three treatments within the 13-km2 Coral Bay watershed resulted in the reduction of annual sediment delivery rates from 445 Mg yr-1 to 327 Mg yr-1. Cost-effectiveness analyses suggest that road drainage improvements and construction of the detention pond provided the greatest reductions in sediment delivery per total amount of funds spent. Even though paving is a proven erosion control method, the high costs involved made it a relatively cost-inefficient method. Marine sedimentation of terrigenous sediment (land-derived) was regularly monitored (every 26 days) at 15 near-shore and reef sites from 2008 to 2013 below the treated and undeveloped watersheds. Sediment composition (% terrigenous) determined by loss on ignition was multiplied by the total sediment accumulation rate in tube sediment traps to obtain terrigenous sediment accumulation rates (in mg cm-2 d-1). Mean terrigenous sediment accumulation rates were over 24 (near-shore) and 6 (reef) times greater below developed compared to undeveloped watersheds. Comparisons of marine terrigenous accumulation rates between undeveloped and developed areas were consistent with those based on modeled sediment yields. At all near-shore sites below mitigated watersheds, mean post-mitigation marine terrigenous sediment accumulation rates were reduced by up to 70% of mean pre-mitigation values. Nevertheless, further analysis is required to evaluate whether the observed post-mitigation reduction is strictly related to watershed restoration. At the developed coral reef sites, acute terrigenous sediment accumulation rates during major storms equaled or exceeded coral-stressing levels (>50 mg cm-2d-1). Results from this research are being employed in the design of mitigation strategies within our study areas as well as in other parts of the Caribbean where roads are considered a major threat to coral reefs.

Validating pollutant load estimates from highways and roads.

DOT National Transportation Integrated Search

2015-12-31

Rain and snowmelt that runs off of roadways carries pollutants. Pollutant event mean concentrations have been developed for various land uses to calculate annual pollutant loads. These were developed for total suspended solids, total phosphorus, and ...

Modeling sediment transport from an off-road vehicle trail stream crossing using WEPP model

Treesearch

Renee' D. Ayala; Puneet Srivastava; Christian J. Brodbeck; Emily A. Carter; Timothy P. McDonald

2005-01-01

There is a limited information available pertaining to the adverse effects of Off-Road-Vehicle (ORV) use and trail impacts. As a result, this study was initiated in 2003 to (a) quantify water quality impacts of an ORV trail stream crossing through monitoring of total suspended solids, and (b) conduct WEPP (Water Erosion Prediction Project) simulations to determine long...

Watershed Analysis Results for Mendocino Redwood Company Lands in Coastal Mendocino and Sonoma Counties

Treesearch

Christopher G. Surfleet

2007-01-01

To assess the needs for conservation, restoration and condition of aquatic habitat within its land Mendocino Redwood Company (MRC) has been conducting watershed analysis. From watershed analysis completed to date, we estimate 73percent of the total sediment inputs over the last 30 to 40 years are road and skid trail associated. Of that percentage 30 percent is road and...

Greenhouse Gas Emissions Driven by the Transportation of Goods Associated with French Consumption.

PubMed

Hawkins, Troy R; Dente, Sebastien M R

2010-11-15

The transportation of goods plays a significant role in the overall greenhouse gas emissions from consumption. This study investigates the connections between French household consumption and production and transportation-related emissions throughout product supply chains. Here a two-region, environmentally extended input-output model is combined with a novel detailed, physical-unit transportation model to examine the connection between product, location of production, choice of transport mode, and greenhouse gas emissions. Total emissions associated with French household consumption are estimated to be 627 MtCO2e, or 11 tCO2e per capita. Of these, 3% are associated with the transportation of goods within France and 10% with transport of goods outside or into France. We find that most transport originating in northern Europe is by road, whereas most transport from other regions is conducted by sea and ocean transport. Rail, inland water, and air transportation play only a minor role in terms of mass, tonne-kilometers, and greenhouse gas emissions. By product, transport of coal and coke and intermediate goods make the largest contribution to overall freight transport emissions associated with French household consumption. In terms of mass, most goods are transported by road while in terms of tonne-kilometers, sea and ocean transport plays the largest role. Road transport contributes the highest share to the transport of all goods with the exceptions of coal and coke and petroleum. We examine the potential for emissions reductions associated with shifting 10% of direct imports by air freight to sea and ocean or road transport and find that the potential reductions are less than 0.03% of total emissions associated with French consumption. We also consider shifting 10% of direct imports by road transport to rail or inland water and find potential reductions on the order of 0.4−0.5% of the total or 3−4% of the freight transport emissions associated with French consumption. The greatest reductions are achieved by shifting from road transport to rail or inland water for direct imports from northern European countries. This suggests a potential environmental benefit associated with improving rail and inland water infrastructures in Europe.

Speed, speed variation and crash relationships for urban arterials.

PubMed

Wang, Xuesong; Zhou, Qingya; Quddus, Mohammed; Fan, Tianxiang; Fang, Shou'en

2018-04-01

Speed and speed variation are closely associated with traffic safety. There is, however, a dearth of research on this subject for the case of urban arterials in general, and in the context of developing nations. In downtown Shanghai, the traffic conditions in each direction are very different by time of day, and speed characteristics during peak hours are also greatly different from those during off-peak hours. Considering that traffic demand changes with time and in different directions, arterials in this study were divided into one-way segments by the direction of flow, and time of day was differentiated and controlled for. In terms of data collection, traditional fixed-based methods have been widely used in previous studies, but they fail to capture the spatio-temporal distributions of speed along a road. A new approach is introduced to estimate speed variation by integrating spatio-temporal speed fluctuation of a single vehicle with speed differences between vehicles using taxi-based high frequency GPS data. With this approach, this paper aims to comprehensively establish a relationship between mean speed, speed variation and traffic crashes for the purpose of formulating effective speed management measures, specifically using an urban dataset. From a total of 234 one-way road segments from eight arterials in Shanghai, mean speed, speed variation, geometric design features, traffic volume, and crash data were collected. Because the safety effects of mean speed and speed variation may vary at different segment lengths, arterials with similar signal spacing density were grouped together. To account for potential correlations among these segments, a hierarchical Poisson log-normal model with random effects was developed. Results show that a 1% increase in mean speed on urban arterials was associated with a 0.7% increase in total crashes, and larger speed variation was also associated with increased crash frequency. Copyright © 2018 Elsevier Ltd. All rights reserved.

Road networks predict human influence on Amazonian bird communities.

PubMed

Ahmed, Sadia E; Lees, Alexander C; Moura, Nárgila G; Gardner, Toby A; Barlow, Jos; Ferreira, Joice; Ewers, Robert M

2014-11-22

Road building can lead to significant deleterious impacts on biodiversity, varying from direct road-kill mortality and direct habitat loss associated with road construction, to more subtle indirect impacts from edge effects and fragmentation. However, little work has been done to evaluate the specific effects of road networks and biodiversity loss beyond the more generalized effects of habitat loss. Here, we compared forest bird species richness and composition in the municipalities of Santarém and Belterra in Pará state, eastern Brazilian Amazon, with a road network metric called 'roadless volume (RV)' at the scale of small hydrological catchments (averaging 3721 ha). We found a significant positive relationship between RV and both forest bird richness and the average number of unique species (species represented by a single record) recorded at each site. Forest bird community composition was also significantly affected by RV. Moreover, there was no significant correlation between RV and forest cover, suggesting that road networks may impact biodiversity independently of changes in forest cover. However, variance partitioning analysis indicated that RV has partially independent and therefore additive effects, suggesting that RV and forest cover are best used in a complementary manner to investigate changes in biodiversity. Road impacts on avian species richness and composition independent of habitat loss may result from road-dependent habitat disturbance and fragmentation effects that are not captured by total percentage habitat cover, such as selective logging, fire, hunting, traffic disturbance, edge effects and road-induced fragmentation. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

Unilateral total hip replacement patients with symptomatic leg length inequality have abnormal hip biomechanics during walking.

PubMed

Li, Junyan; McWilliams, Anthony B; Jin, Zhongmin; Fisher, John; Stone, Martin H; Redmond, Anthony C; Stewart, Todd D

2015-06-01

Symptomatic leg length inequality accounts for 8.7% of total hip replacement related claims made against the UK National Health Service Litigation authority. It has not been established whether symptomatic leg length inequality patients following total hip replacement have abnormal hip kinetics during gait. Hip kinetics in 15 unilateral total hip replacement patients with symptomatic leg length inequality during gait was determined through multibody dynamics and compared to 15 native hip healthy controls and 15 'successful' asymptomatic unilateral total hip replacement patients. More significant differences from normal were found in symptomatic leg length inequality patients than in asymptomatic total hip replacement patients. The leg length inequality patients had altered functions defined by lower gait velocity, reduced stride length, reduced ground reaction force, decreased hip range of motion, reduced hip moment and less dynamic hip force with a 24% lower heel-strike peak, 66% higher mid-stance trough and 37% lower toe-off peak. Greater asymmetry in hip contact force was also observed in leg length inequality patients. These gait adaptions may affect the function of the implant and other healthy joints in symptomatic leg length inequality patients. This study provides important information for the musculoskeletal function and rehabilitation of symptomatic leg length inequality patients. Copyright © 2015. Published by Elsevier Ltd.

Russia's black carbon emissions: focus on diesel sources

NASA Astrophysics Data System (ADS)

Kholod, Nazar; Evans, Meredydd; Kuklinski, Teresa

2016-09-01

Black carbon (BC) is a significant climate forcer with a particularly pronounced forcing effect in polar regions such as the Russian Arctic. Diesel combustion is a major global source of BC emissions, accounting for 25-30 % of all BC emissions. While the demand for diesel is growing in Russia, the country's diesel emissions are poorly understood. This paper presents a detailed inventory of Russian BC emissions from diesel sources. Drawing on a complete Russian vehicle registry with detailed information about vehicle types and emission standards, this paper analyzes BC emissions from diesel on-road vehicles. We use the COPERT emission model (COmputer Programme to calculate Emissions from Road Transport) with Russia-specific emission factors for all types of on-road vehicles. On-road diesel vehicles emitted 21 Gg of BC in 2014: heavy-duty trucks account for 60 % of the on-road BC emissions, while cars represent only 5 % (light commercial vehicles and buses account for the remainder). Using Russian activity data and fuel-based emission factors, the paper also presents BC emissions from diesel locomotives and ships, off-road engines in industry, construction and agriculture, and generators. The study also factors in the role of superemitters in BC emissions from diesel on-road vehicles and off-road sources. The total emissions from diesel sources in Russia are estimated to be 49 Gg of BC and 17 Gg of organic carbon (OC) in 2014. Off-road diesel sources emitted 58 % of all diesel BC in Russia.

Russia's black carbon emissions: focus on diesel sources

DOE PAGES

Kholod, Nazar; Evans, Meredydd; Kuklinski, Teresa

2016-09-12

Black carbon (BC) is a significant climate forcer with a particularly pronounced forcing effect in polar regions such as the Russian Arctic. Diesel combustion is a major global source of BC emissions, accounting for 25–30 % of all BC emissions. While the demand for diesel is growing in Russia, the country's diesel emissions are poorly understood. This paper presents a detailed inventory of Russian BC emissions from diesel sources. Drawing on a complete Russian vehicle registry with detailed information about vehicle types and emission standards, this paper analyzes BC emissions from diesel on-road vehicles. We use the COPERT emission modelmore » (COmputer Programme to calculate Emissions from Road Transport) with Russia-specific emission factors for all types of on-road vehicles. On-road diesel vehicles emitted 21 Gg of BC in 2014: heavy-duty trucks account for 60% of the on-road BC emissions, while cars represent only 5% (light commercial vehicles and buses account for the remainder). Using Russian activity data and fuel-based emission factors, the paper also presents BC emissions from diesel locomotives and ships, off-road engines in industry, construction and agriculture, and generators. The study also factors in the role of superemitters in BC emissions from diesel on-road vehicles and off-road sources. The total emissions from diesel sources in Russia are estimated to be 49 Gg of BC and 17 Gg of organic carbon (OC) in 2014. Off-road diesel sources emitted 58% of all diesel BC in Russia.« less

Epidemiology of Handheld Cell Phone Use While Driving: A Study from a South Indian City

PubMed Central

Majgi, Sumanth Mallikarjuna; AiswaryaLakshmi, A. S.

2018-01-01

Background: Using cell phones while driving contribute to distractions which can potentially cause minor or major road traffic injuries and also stress among other drivers. With this background, the study was done to ascertain the proportion of handheld cell phone use while driving among road users in Mysore city and also patterns of the use by the day of week, type of road, and type of vehicle. Methods: The study was conducted in Mysore, Karnataka, India. Four stretches of roads were observed thrice daily for 1 week. The total number of vehicles passing through the stretch and the number and characteristics of drivers using hand-held cell was noted. Pearson's Chi-square test was used to ascertain the significance of the difference in proportions. Results: The overall proportion of cell phone users was calculated as 1.41/100 vehicles. The observed use of handheld cell phones was 1.78 times higher on nonbusy roads than busy roads (Χ2 = 25.79, P < 0.0001). More than 50% of the handheld phone users were driving a two wheeler, the proportion being 50.5% in busy roads, and 67% in nonbusy roads. There was no difference in the proportion of cell phone use by time of the day or across different days of the week. Conclusions: The proportion of drivers who use cell phones is found to be relatively lower, and use of cell phones was higher on nonbusy roads. PMID:29619153

Epidemiology of Handheld Cell Phone Use While Driving: A Study from a South Indian City.

PubMed

Majgi, Sumanth Mallikarjuna; AiswaryaLakshmi, A S

2018-01-01

Using cell phones while driving contribute to distractions which can potentially cause minor or major road traffic injuries and also stress among other drivers. With this background, the study was done to ascertain the proportion of handheld cell phone use while driving among road users in Mysore city and also patterns of the use by the day of week, type of road, and type of vehicle. The study was conducted in Mysore, Karnataka, India. Four stretches of roads were observed thrice daily for 1 week. The total number of vehicles passing through the stretch and the number and characteristics of drivers using hand-held cell was noted. Pearson's Chi-square test was used to ascertain the significance of the difference in proportions. The overall proportion of cell phone users was calculated as 1.41/100 vehicles. The observed use of handheld cell phones was 1.78 times higher on nonbusy roads than busy roads ( Χ 2 = 25.79, P < 0.0001). More than 50% of the handheld phone users were driving a two wheeler, the proportion being 50.5% in busy roads, and 67% in nonbusy roads. There was no difference in the proportion of cell phone use by time of the day or across different days of the week. The proportion of drivers who use cell phones is found to be relatively lower, and use of cell phones was higher on nonbusy roads.

Russia's black carbon emissions: focus on diesel sources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kholod, Nazar; Evans, Meredydd; Kuklinski, Teresa

Black carbon (BC) is a significant climate forcer with a particularly pronounced forcing effect in polar regions such as the Russian Arctic. Diesel combustion is a major global source of BC emissions, accounting for 25–30 % of all BC emissions. While the demand for diesel is growing in Russia, the country's diesel emissions are poorly understood. This paper presents a detailed inventory of Russian BC emissions from diesel sources. Drawing on a complete Russian vehicle registry with detailed information about vehicle types and emission standards, this paper analyzes BC emissions from diesel on-road vehicles. We use the COPERT emission modelmore » (COmputer Programme to calculate Emissions from Road Transport) with Russia-specific emission factors for all types of on-road vehicles. On-road diesel vehicles emitted 21 Gg of BC in 2014: heavy-duty trucks account for 60% of the on-road BC emissions, while cars represent only 5% (light commercial vehicles and buses account for the remainder). Using Russian activity data and fuel-based emission factors, the paper also presents BC emissions from diesel locomotives and ships, off-road engines in industry, construction and agriculture, and generators. The study also factors in the role of superemitters in BC emissions from diesel on-road vehicles and off-road sources. The total emissions from diesel sources in Russia are estimated to be 49 Gg of BC and 17 Gg of organic carbon (OC) in 2014. Off-road diesel sources emitted 58% of all diesel BC in Russia.« less

Russia's black carbon emissions: focus on diesel sources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kholod, Nazar; Evans, Meredydd; Kuklinski, Teresa

Black carbon (BC) is a significant climate forcer with a particularly pronounced forcing effect in polar regions such as the Russian Arctic. Diesel combustion is a major global source of BC emissions, accounting for 25–30% of all BC emissions. While the demand for diesel is growing in Russia, the country's diesel emissions are poorly understood. This paper presents a detailed inventory of Russian BC emissions from diesel sources. Drawing on a complete Russian vehicle registry with detailed information about vehicle types and emission standards, this paper analyzes BC emissions from diesel on-road vehicles. We use the COPERT emission model (COmputermore » Programme to calculate Emissions from Road Transport) with Russia-specific emission factors for all types of on-road vehicles. On-road diesel vehicles emitted 21 Gg of BC in 2014: heavy-duty trucks account for 60% of the on-road BC emissions, while cars represent only 5% (light commercial vehicles and buses account for the remainder). Using Russian activity data and fuel-based emission factors, the paper also presents BC emissions from diesel locomotives and ships, off-road engines in industry, construction and agriculture, and generators. The study also factors in the role of superemitters in BC emissions from diesel on-road vehicles and off-road sources. The total emissions from diesel sources in Russia are estimated to be 49 Gg of BC and 17 Gg of organic carbon (OC) in 2014. Off-road diesel sources emitted 58% of all diesel BC in Russia.« less

Road and Rail Traffic Noise Induce Comparable Extra-aural Effects as Revealed During a Short-term Memory Test

PubMed Central

Gallasch, Eugen; Raggam, Reinhard B; Cik, Michael; Rabensteiner, Jasmin; Lackner, Andreas; Piber, Barbara; Marth, Egon

2016-01-01

To examine extraaural effects as induced by 20 min of road (ROAD) and 20 min of rail (RAIL) traffic noise with same loudness (75 dBA), a laboratory study was carried out. The study (N=54) consisted of 28 high and 26 low-annoyed healthy individuals as determined by a traffic annoyance test. To control attention, all individuals performed a nonauditory short-term memory test during the noise exposures. A within-subject design, with phases of ROAD, RAIL, and CALM (memory test only), alternated by phases of rest, was defined. Heart rate (HR), systolic blood pressure (sBP), total peripheral resistance (TPR), as well as three autonomic variables, preejection period (PEP), 0.15–0.4 Hz high-frequency component of HR variability (HF), and salivary stress biomarker alpha amylase (sAA) were measured. In relation to CALM, HR increased (RAIL +2.1%, ROAD +2.5%), sBP tended to increase against the end of noise exposure, PEP decreased (RAIL −0.7%, ROAD −0.8%), HF decreased (RAIL −3.4%, ROAD −2.9%), and sAA increased (RAIL +78%, ROAD +69%). No differences were found between RAIL and ROAD, indicating that both noise stressors induced comparable extraaural effects. Factor annoyance showed significant during CALM. Here a reduced sympathetic drive (higher PEP values) combined with an increased vascular tone (higher TPR values) was found at the high-annoyed subgroup. PMID:27569408

High Variation in Pathogenicity of Genetically Closely Related Strains of Xanthomonas albilineans, the Sugarcane Leaf Scald Pathogen, in Guadeloupe.

PubMed

Champoiseau, P; Daugrois, J-H; Pieretti, I; Cociancich, S; Royer, M; Rott, P

2006-10-01

ABSTRACT Pathogenicity of 75 strains of Xanthomonas albilineans from Guadeloupe was assessed by inoculation of sugarcane cv. B69566, which is susceptible to leaf scald, and 19 of the strains were selected as representative of the variation in pathogenicity observed based on stalk colonization. In vitro production of albicidin varied among these 19 strains, but the restriction fragment length polymorphism pattern of their albicidin biosynthesis genes was identical. Similarly, no genomic variation was found among strains by pulsed-field gel electrophoresis. Some variation among strains was found by amplified fragment length polymorphism, but no relationship between this genetic variation and variation in pathogenicity was found. Only 3 (pilB, rpfA, and xpsE) of 40 genes involved in pathogenicity of bacterial species closely related to X. albilineans could be amplified by polymerase chain reaction from total genomic DNA of all nine strains tested of X. albilineans differing in pathogenicity in Guadeloupe. Nucleotide sequences of these genes were 100% identical among strains, and a phylogenetic study with these genes and housekeeping genes efp and ihfA suggested that X. albilineans is on an evolutionary road between the X. campestris group and Xylella fastidiosa, another vascular plant pathogen. Sequencing of the complete genome of Xanthomonas albilineans could be the next step in deciphering molecular mechanisms involved in pathogenicity of X. albilineans.

Predicting Older Driver On-Road Performance by Means of the Useful Field of View and Trail Making Test Part B

PubMed Central

Wang, Yanning; Crizzle, Alexander M.; Winter, Sandra M.; Lanford, Desiree N.

2013-01-01

The Useful Field of View® (UFOV) and Trail Making Test Part B (Trails B) are measures of divided attention. We determined which measure was more accurate in predicting on-road outcomes among drivers (N = 198, mean age = 73.86, standard deviation = 6.05). Receiver operating characteristic curves for the UFOV (Risk Index [RI] and Subtests 1–3) and Trails B significantly predicted on-road outcomes. Contrasting Trails B with the UFOV RI and subtests, the only difference was found between the UFOV RI and Trails B, indicating the UFOV RI was the best predictor of on-road outcomes. Misclassifications of drivers totaled 28 for the UFOV RI, 62 for Trails B, and 58 for UFOV Subtest 2. The UFOV RI is a superior test in predicting on-road outcomes, but the Trails B has acceptable accuracy and is comparable to the other UFOV subtests. PMID:23968796

Heavy metals in garden soils along roads in Szeged, Hungary

NASA Astrophysics Data System (ADS)

Szolnoki, Zsuzsanna; Farsang, Andrea

2010-05-01

The soils of the urban environment, owing to the various anthropogenic activities, can be contaminated by heavy metals. The traffic is well-known for more decades to be main source of heavy metals mostly in cities. The accumulation of these elements can have different effects, either directly endangering the natural soil functions, or indirectly endangering the biosphere by bio-accumulation and inclusion in the food chain. The hobby gardens and the vegetable gardens directly along roads can be potential risky for people since unknown amount of heavy metals can be accumulated into organization of local residents due to consumption of vegetables and fruits grown in their own garden. The aim of this study was to determine the heavy metal content of garden soils directly along roads with heavy traffic in order to assess possible risk for human health. The total content and the mobile content of Cd, Co, Cr, Cu, Ni, Pb and Zn have been determined in samples from garden soils along 5 busy roads of Szeged, South Hungary. Enrichment factor has been calculated with the help of control soil samples far from roads. The soil properties basically influencing on metal mobility have also been examined. Finally, the human health risk of these garden soils has been modelled by determination of health risk quotient (HRQ). As a result of our investigations, it can be claimed that mostly Cu, Zn and to a lesser degree the Ni, Cr and Pb accumulated in garden soils along roads depending on the traffic density. In general, the topsoils (0-10 cm) had higher amount of these metals rather than the subsoils (40-50 cm). Ni of these metals has approached; Cu has exceeded limit value while Pb is under it. Cd is very high in both soils along roads and control ones far from roads. Garden soils along the roads have such basic soil parameters (pH, mechanical soil type, humus content) that prove fairly high metal-binding capacity for these soils. Total risk of usage of these gardens (ingestion of soil, dermal contact, consumption of vegetables) has not exceeded the moderate level in normal case. However, the degree of risk has considerably increased if you consume exclusively vegetables in contaminated garden soils. In this case the risk can be relatively high for the more sensitive children.

Exploring the safety in numbers effect for vulnerable road users on a macroscopic scale.

PubMed

Tasic, Ivana; Elvik, Rune; Brewer, Simon

2017-12-01

A "Safety in Numbers" effect for a certain group of road users is present if the number of crashes increases at a lower rate than the number of road users. The existence of this effect has been invoked to justify investments in multimodal transportation improvements in order to create more sustainable urban transportation systems by encouraging walking, biking, and transit ridership. The goal of this paper is to explore safety in numbers effect for cyclists and pedestrians in areas with different levels of access to multimodal infrastructure. Data from Chicago served to estimate the expected number of crashes on the census tract level by applying Generalized Additive Models (GAM) to capture spatial dependence in crash data. Measures of trip generation, multimodal infrastructure, network connectivity and completeness, and accessibility were used to model travel exposure in terms of activity, number of trips, trip length, travel opportunities, and conflicts. The results show that a safety in numbers effect exists on a macroscopic level for motor vehicles, pedestrians, and bicyclists. Copyright © 2017 Elsevier Ltd. All rights reserved.

Occupational exposure to asphalt fume can cause oxidative DNA damage among road paving workers.

PubMed

Bal, Ceylan; Ağış, Erol R; Büyükşekerci, Murat; Gündüzöz, Meşide; Tutkun, Lütfiye; Yılmaz, Ömer H

2018-06-01

We designed the present study to determine the effect of occupational exposure to asphalt fumes on oxidative status and DNA damage in road paving workers. Sixty road paving workers exposed to asphalt fumes and forty non-exposed control subjects were recruited. Occupational exposure to PAHs was assessed by urinary 1-hydroxypyrene (1-OHP) excretion. Serum thiol disulfide homeostasis (TDH), total oxidant status (TOS) and total antioxidant status (TAS) and urinary 8-hydro-deoxyguanosine (8-OH-dG) level were evaluated by automated colourimetric method. The urinary concentrations of 1-OHP and 8-OH-dG were significantly higher in the exposed group than in the control group (P < 0.001). Disulfide/thiol ratio, TOS, and TAS were also significantly higher for the asphalt workers. A positive correlation existed between urinary 1-OHP and 8-OH-dG, TOS and TAS. Study results indicate that exposure to PAHs induces oxidative stress and causes genotoxic effects in asphalt workers. © 2018 Wiley Periodicals, Inc.

Hot emission model for mobile sources: application to the metropolitan region of the city of Santiago, Chile.

PubMed

Corvalán, Roberto M; Osses, Mauricio; Urrutia, Cristian M

2002-02-01

Depending on the final application, several methodologies for traffic emission estimation have been developed. Emission estimation based on total miles traveled or other average factors is a sufficient approach only for extended areas such as national or worldwide areas. For road emission control and strategies design, microscale analysis based on real-world emission estimations is often required. This involves actual driving behavior and emission factors of the local vehicle fleet under study. This paper reports on a microscale model for hot road emissions and its application to the metropolitan region of the city of Santiago, Chile. The methodology considers the street-by-street hot emission estimation with its temporal and spatial distribution. The input data come from experimental emission factors based on local driving patterns and traffic surveys of traffic flows for different vehicle categories. The methodology developed is able to estimate hourly hot road CO, total unburned hydrocarbons (THCs), particulate matter (PM), and NO(x) emissions for predefined day types and vehicle categories.

Urban infrastructure and longitudinal stream profiles

NASA Astrophysics Data System (ADS)

Lindner, G. A.; Miller, A. J.

2009-12-01

Urban streams usually are highly engineered or modified by human activity and are conventionally thought of as being geometrically, and thus hydraulically, simple. The work presented here, a contribution to NSF CNH Project 0709659, is designed to capture the influence of urban infrastructure on the character of longitudinal profiles and flow hydraulics along streams in the Baltimore metropolitan area. Detailed topographic data sets are derived from LiDAR supplemented by total-station surveys of the channel bed and low-flow water surface. These in turn are used to drive 2D depth-averaged hydraulic models comparing flow conditions over a range of urban development patterns and stormwater management regimes. Results from stream surveys of 1-2 km length indicate that channels in older, highly urbanized areas typically have straight planforms and strongly stepped profiles characterized by a series of deep, stagnant pools with short intervening riffles or runs. This pattern is associated with frequent interruption of the channel profile by bridges, culverts, road embankments and other artificial structures. In one survey reach of the Dead Run watershed, 50 percent of cumulative channel length has zero gradient at low flow, and 50 percent of cumulative head loss is accounted for by only 4 percent of channel length. In the suburban Red Run watershed recent development has occurred under strict stormwater management regulations with minimal encroachment on the riparian zone. Although their average gradients are similar, the Red Run survey reach is steeper than the Dead Run reach over most its length but has a smaller fraction of total head loss caused by local slope breaks. Modeling results indicate that these differences in stream morphology are associated with differences in velocity, flow pattern, and residence time at base flow; the stepped nature of the profile in the older urban area becomes less pronounced at intermediate to high flows, but the controlling influence of infrastructure may become dominant again during large floods. Because flashy urban streams have lower and more persistent low flows as well as more extreme flood flows, these hydraulic patterns may have implications for both biogeochemical cycling at base flow and transport and deposition of sediment and other constituents during flood periods. Continuing research will develop a typology of urban streams in terms of the influence of engineering practices on flow patterns and material transport.

Road Environments: Impact of Metals on Human Health in Heavily Congested Cities of Poland

PubMed Central

Adamiec, Ewa

2017-01-01

Road dust as a by-product of exhaust and non-exhaust emissions can be a major cause of systemic oxidative stress and multiple disorders. Substantial amounts of road dust are repeatedly resuspended, in particular at traffic lights and junctions where more braking is involved, causing potential threat to pedestrians, especially children. In order to determine the degree of contamination in the heavily traffic-congested cities of Poland, a total of 148 samples of road dust (RD), sludge from storm drains (SL) and roadside soil (RS) were collected. Sixteen metals were analysed using inductively coupled plasma mass spectrometry (ICP-MS), inductively coupled plasma atomic emission spectroscopy (ICP-OES) and atomic absorption spectroscopy (AAS) in all samples. Chemical evaluation followed by Principal Component Analysis (PCA) revealed that road environments have been severely contaminated with traffic-related elements. Concentration of copper in all road-environment samples is even higher, exceeding even up to 15 times its average concentrations established for the surrounding soils. Non-carcinogenic health risk assessment revealed that the hazard index (HI) for children in all road-environment samples exceeds the safe level of 1. Therefore, greater attention should be paid to potential health risks caused by the ingestion of traffic-related particles during outdoor activities. PMID:28661464

Influence of Sampling Effort on the Estimated Richness of Road-Killed Vertebrate Wildlife

NASA Astrophysics Data System (ADS)

Bager, Alex; da Rosa, Clarissa A.

2011-05-01

Road-killed mammals, birds, and reptiles were collected weekly from highways in southern Brazil in 2002 and 2005. The objective was to assess variation in estimates of road-kill impacts on species richness produced by different sampling efforts, and to provide information to aid in the experimental design of future sampling. Richness observed in weekly samples was compared with sampling for different periods. In each period, the list of road-killed species was evaluated based on estimates the community structure derived from weekly samplings, and by the presence of the ten species most subject to road mortality, and also of threatened species. Weekly samples were sufficient only for reptiles and mammals, considered separately. Richness estimated from the biweekly samples was equal to that found in the weekly samples, and gave satisfactory results for sampling the most abundant and threatened species. The ten most affected species showed constant road-mortality rates, independent of sampling interval, and also maintained their dominance structure. Birds required greater sampling effort. When the composition of road-killed species varies seasonally, it is necessary to take biweekly samples for a minimum of one year. Weekly or more-frequent sampling for periods longer than two years is necessary to provide a reliable estimate of total species richness.

Influence of sampling effort on the estimated richness of road-killed vertebrate wildlife.

PubMed

Bager, Alex; da Rosa, Clarissa A

2011-05-01

Road-killed mammals, birds, and reptiles were collected weekly from highways in southern Brazil in 2002 and 2005. The objective was to assess variation in estimates of road-kill impacts on species richness produced by different sampling efforts, and to provide information to aid in the experimental design of future sampling. Richness observed in weekly samples was compared with sampling for different periods. In each period, the list of road-killed species was evaluated based on estimates the community structure derived from weekly samplings, and by the presence of the ten species most subject to road mortality, and also of threatened species. Weekly samples were sufficient only for reptiles and mammals, considered separately. Richness estimated from the biweekly samples was equal to that found in the weekly samples, and gave satisfactory results for sampling the most abundant and threatened species. The ten most affected species showed constant road-mortality rates, independent of sampling interval, and also maintained their dominance structure. Birds required greater sampling effort. When the composition of road-killed species varies seasonally, it is necessary to take biweekly samples for a minimum of one year. Weekly or more-frequent sampling for periods longer than two years is necessary to provide a reliable estimate of total species richness.

Road Environments: Impact of Metals on Human Health in Heavily Congested Cities of Poland.

PubMed

Adamiec, Ewa

2017-06-29

Road dust as a by-product of exhaust and non-exhaust emissions can be a major cause of systemic oxidative stress and multiple disorders. Substantial amounts of road dust are repeatedly resuspended, in particular at traffic lights and junctions where more braking is involved, causing potential threat to pedestrians, especially children. In order to determine the degree of contamination in the heavily traffic-congested cities of Poland, a total of 148 samples of road dust (RD), sludge from storm drains (SL) and roadside soil (RS) were collected. Sixteen metals were analysed using inductively coupled plasma mass spectrometry (ICP-MS), inductively coupled plasma atomic emission spectroscopy (ICP-OES) and atomic absorption spectroscopy (AAS) in all samples. Chemical evaluation followed by Principal Component Analysis (PCA) revealed that road environments have been severely contaminated with traffic-related elements. Concentration of copper in all road-environment samples is even higher, exceeding even up to 15 times its average concentrations established for the surrounding soils. Non-carcinogenic health risk assessment revealed that the hazard index (HI) for children in all road-environment samples exceeds the safe level of 1. Therefore, greater attention should be paid to potential health risks caused by the ingestion of traffic-related particles during outdoor activities.

[Protection regionalization of Houshi Forest Park based on landscape sensitivity].

PubMed

Zhou, Rui; Li, Yue-hui; Hu, Yuan-man; Zhang, Jia-hui; Liu, Miao

2009-03-01

By using GIS technology, and selecting slope, relative distance to viewpoints, relative distance to tourism roads, visual probability of viewpoints, and visual probability of tourism roads as the indices, the landscape sensitivity of Houshi Forest Park was assessed, and an integrated assessment model was established. The AHP method was utilized to determine the weights of the indices, and further, to identify the integrated sensitivity class of the areas in the Park. Four classes of integrated sensitivity area were divided. Class I had an area of 297.24 hm2, occupying 22.9% of the total area of the Park, which should be strictly protected to maintain natural landscape, and prohibited any exploitation or construction. Class II had an area of 359.72 hm2, accounting for 27.8% of the total. The hills in this area should be kept from destroying to protect vegetation and water, but the simple byway and stone path could be built. Class III had an area reached up to 495.80 hm2, occupying 38.3% of the total, which could be moderately exploited, and artificial landscape was advocated to beautify and set off natural landscape. Class IV had the smallest area (142.80 hm2) accounting for 11% of the total, which had the greatest potential of exploitation, being possible to build large-scale integrated tourism facilities and travelling roads.

The hospital cost of road traffic accidents at a South African regional trauma centre: a micro-costing study.

PubMed

Parkinson, F; Kent, S J W; Aldous, C; Oosthuizen, G; Clarke, D

2014-01-01

Road traffic crashes are responsible for a vast amount of death and disability in developing countries. This study uses a bottom up, micro-costing approach to determine the cost of road traffic related crashes in South Africa. Using the data from one hundred consecutive RTC related admissions to a regional hospital in South Africa we performed a bottom up costing study. To calculate costs patients were reviewed every 48 h and all interventions were recorded for each individual patient. Prices of interventions were obtained from hospital pricelists. A total cost was calculated on an individual basis. The total cost of in-patient care for these patients was US $6,98,850. Upper limb injuries were the most expensive, and the total cost increased with the number of body regions injured. The biggest expenditure was on ward overheads ($2,81,681). Ninety operations were performed - the total cost of theatre time was $1,48,230 and the cost of orthopaedic implants was $1,26,487. The cost of care of a RTC victim is significant. In light of the high numbers of RTC victims admitted over the course of the year this is a significant cost burden for a regional hospital to bear. This cost must be taken into account when allocating hospital budgets. Copyright © 2013 Elsevier Ltd. All rights reserved.

Total Copper Analyzer for Rapid In Situ Characterization of Effluent Discharges

DTIC Science & Technology

2008-08-01

Building 345 Airdrome Road Wahiawa, HI 96786 SBWWTP operations superintendent Linda Bingler Battelle Sequim Operations PNNL 1529 West Sequim Bay ...concentration measurements by ICP-MS at the Battelle Marine Sciences Laboratory in Sequim , Washington, and a second sample was sent for analysis by GFAA...Road Sequim , WA 98382 Commercial laboratory liaison Steve West Orion Research, Inc. 500 Cummings Center Beverly, MA 01915 Industry partner A

The influence of road traffic noise on sleep

NASA Astrophysics Data System (ADS)

Eberhardt, J. L.

1988-12-01

The influence of road traffic noise on the sleep of adults and 6-11 year old children was studied by using electrophysiological methods. Young adults, unaccustomed to traffic noise, were disturbed by continuous and intermittent traffic noise at 45 dB(A). No sleep disturbances were found for continuous traffic noise at 36 dB(A). Car passages with a peak noise level of 55 dB(A) caused awakenings. The equivalent sound pressure level ( Leq) did not correlate with sleep disturbance effects. A better noise dose description was found in the number of vehicles per night that made most noise. Children wer about 10 dB(A) less sensitive than adults to awakening reactions, and even less sensitive with respect to disturbances of REM sleep and deep sleep. Total habituation to road traffic noise did not occur, even after at least one year of exposure. Sound reduction in the bedroom induced increased amounts of deep sleep for adults and reduced falling-asleep time for children. Road traffic noise during the first hours of a night's sleep tended to disturb sleep more than when it ocurred later in the night, the main effects being a reduction of the total amount of REM sleep during the night and an increased duration of intermittent wakefulness during the hours of exposure.

Assessment of lead, cadmium, and zinc contamination of roadside soils, surface films, and vegetables in Kampala City, Uganda.

PubMed

Nabulo, Grace; Oryem-Origa, Hannington; Diamond, Miriam

2006-05-01

The relationship between traffic density and trace metal concentrations in roadside soils, surface films, and a selected vegetable weed, Amaranthus dubius Mart. Ex Thell., was determined in 11 farming sites along major highways around Kampala City in Uganda. Surface soil, atmospherically deposited surface films on windows, and leaves of Amaranthus dubius were sampled at known distances from the roads and analyzed for lead (Pb), zinc (Zn), and cadmium (Cd) using flame atomic absorption spectrophotometry. Atmospherically deposited trace metal particulates were sampled using window glass as an inert, passive collector. Total trace metal concentrations in soils ranged from 30.0+/-2.3 to 64.6+/-11.7 mg/kg Pb, 78.4+/-18.4 to 265.6+/-63.2 mg/kg Zn, and 0.8+/-0.13 to 1.40+/-0.16 mg/kg Cd. Total trace metal levels in soil decreased rapidly with distance from the road. Total Pb decreased with distance up to 30 m from the road, where it reached a background soil concentration of 28 mg/kg dry weight. The study found background values of 50 and 1.4 mg/kg for Zn and Cd in roadside soils, respectively. Similarly, Pb concentration in Amaranthus dubius leaves decreased with increasing distance from the road edge. The dominant pathway for Pb contamination was from atmospheric deposition, which was consistent with Pb concentrations in surface films. The mean Pb concentrations in leaves of roadside crops were higher than those in their respective roots, with the highest leaf-to-root ratio observed in the Brassica oleraceae acephala group. The lowest Pb and Zn concentrations were found in the fruit compared to the leaves of the same crops. Leaves of roadside vegetables were therefore considered a potential source of heavy metal contamination to farmers and consumers in urban areas. It is recommended that leafy vegetables should be grown 30 m from roads in high-traffic, urban areas.

Assessment of lead, cadmium, and zinc contamination of roadside soils, surface films, and vegetables in Kampala City, Uganda

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nabulo, Grace; Oryem-Origa, Hannington; Diamond, Miriam

2006-05-15

The relationship between traffic density and trace metal concentrations in roadside soils, surface films, and a selected vegetable weed, Amaranthus dubius Mart. Ex Thell., was determined in 11 farming sites along major highways around Kampala City in Uganda. Surface soil, atmospherically deposited surface films on windows, and leaves of Amaranthus dubius were sampled at known distances from the roads and analyzed for lead (Pb), zinc (Zn), and cadmium (Cd) using flame atomic absorption spectrophotometry. Atmospherically deposited trace metal particulates were sampled using window glass as an inert, passive collector. Total trace metal concentrations in soils ranged from 30.0{+-}2.3 to 64.6{+-}11.7more » mg/kg Pb, 78.4{+-}18.4 to 265.6{+-}63.2 mg/kg Zn, and 0.8{+-}0.13 to 1.40{+-}0.16 mg/kg Cd. Total trace metal levels in soil decreased rapidly with distance from the road. Total Pb decreased with distance up to 30 m from the road, where it reached a background soil concentration of 28 mg/kg dry weight. The study found background values of 50 and 1.4 mg/kg for Zn and Cd in roadside soils, respectively. Similarly, Pb concentration in Amaranthus dubius leaves decreased with increasing distance from the road edge. The dominant pathway for Pb contamination was from atmospheric deposition, which was consistent with Pb concentrations in surface films. The mean Pb concentrations in leaves of roadside crops were higher than those in their respective roots, with the highest leaf-to-root ratio observed in the Brassica oleraceae acephala group. The lowest Pb and Zn concentrations were found in the fruit compared to the leaves of the same crops. Leaves of roadside vegetables were therefore considered a potential source of heavy metal contamination to farmers and consumers in urban areas. It is recommended that leafy vegetables should be grown 30 m from roads in high-traffic, urban areas.« less

Use of fatal real-life crashes to analyze a safe road transport system model, including the road user, the vehicle, and the road.

PubMed

Stigson, Helena; Krafft, Maria; Tingvall, Claes

2008-10-01

To evaluate if the Swedish Road Administration (SRA) model for a safe road transport system, which includes the interaction between the road user, the vehicle, and the road, could be used to classify fatal car crashes according to some safety indicators. Also, to present a development of the model to better identify system weakness. Real-life crashes with a fatal outcome were classified according to the vehicle's safety rating by Euro NCAP (European Road Assessment Programme) and fitment of ESC (Electronic Stability Control). For each crash, the road was also classified according to EuroRAP (European Road Assessment Programme) criteria, and human behavior in terms of speeding, seat belt use, and driving under the influence of alcohol. Each crash was compared with the model criteria, to identify components that might have contributed to fatal outcome. All fatal crashes where a car occupant was killed that occurred in Sweden during 2004 were included: in all, 215 crashes with 248 fatalities. The data were collected from the in-depth fatal crash data of the Swedish Road Administration (SRA). It was possible to classify 93% of the fatal car crashes according to the SRA model. A number of shortcomings in the criteria were identified since the model did not address rear-end or animal collisions or collisions with stationary/parked vehicles or trailers (18 out of 248 cases). Using the further developed model, it was possible to identify that most of the crashes occurred when two or all three components interacted (in 85 of the total 230 cases). Noncompliance with safety criteria for the road user, the vehicle, and the road led to fatal outcome in 43, 27, and 75 cases, respectively. The SRA model was found to be useful for classifying fatal crashes but needs to be further developed to identify how the components interact and thereby identify weaknesses in the road traffic system. This developed model might be a tool to systematically identify which of the components are linked to fatal outcome. In the presented study, fatal outcomes were mostly related to an interaction between the three components: the road, the vehicle, and the road user. Of the three components, the road was the one that was most often linked to a fatal outcome.

Spatial and temporal disaggregation of the on-road vehicle emission inventory in a medium-sized Andean city. Comparison of GIS-based top-down methodologies

NASA Astrophysics Data System (ADS)

Gómez, C. D.; González, C. M.; Osses, M.; Aristizábal, B. H.

2018-04-01

Emission data is an essential tool for understanding environmental problems associated with sources and dynamics of air pollutants in urban environments, especially those emitted from vehicular sources. There is a lack of knowledge about the estimation of air pollutant emissions and particularly its spatial and temporal distribution in South America, mainly in medium-sized cities with population less than one million inhabitants. This work performed the spatial and temporal disaggregation of the on-road vehicle emission inventory (EI) in the medium-sized Andean city of Manizales, Colombia, with a spatial resolution of 1 km × 1 km and a temporal resolution of 1 h. A reported top-down methodology, based on the analysis of traffic flow levels and road network distribution, was applied. Results obtained allowed the identification of several hotspots of emission at the downtown zone and the residential and commercial area of Manizales. Downtown exhibited the highest percentage contribution of emissions normalized by its total area, with values equal to 6% and 5% of total CO and PM10 emissions per km2 respectively. These indexes were higher than those obtained in residential-commercial area with values of 2%/km2 for both pollutants. Temporal distribution showed strong relationship with driving patterns at rush hours, as well as an important influence of passenger cars and motorcycles in emissions of CO both at downtown and residential-commercial areas, and the impact of public transport in PM10 emissions in the residential-commercial zone. Considering that detailed information about traffic counts and road network distribution is not always available in medium-sized cities, this work compares other simplified top-down methods for spatially assessing the on-road vehicle EI. Results suggested that simplified methods could underestimate the spatial allocation of downtown emissions, a zone dominated by high traffic of vehicles. The comparison between simplified methods based on total traffic counts and road density distribution suggested that the use of total traffic counts in a simplified form could enhance higher uncertainties in the spatial disaggregation of emissions. Results obtained could add new information that help to improve the air pollution management system in the city and contribute to local public policy decisions. Additionally, this work provides appropriate resolution emission fluxes for ongoing research in atmospheric modeling in the city, with the aim to improve the understanding of transport, transformation and impacts of pollutant emissions in urban air quality.

Green technology as a strategy in managing the black spots in Siak Highway, Indonesia

NASA Astrophysics Data System (ADS)

Sandhyavitri, A.; Wira, J.; Martin, A.

2018-04-01

It was identified that the total traffic accidents in the highway section of Siak, Indonesia within the period of 2011 to 2015 were 1,208 events (2 accidents per 3 days). This accidents figure were considered relatively high and it need to mitigate. The aim of this research are to; (i) analyze the location of Black Spot in the Siak highway, and (ii) drawn a strategy reducing the traffic accidents based on green technology. This study identified that the black spot area was located in the STA 44 + 050 (with a value of the weighted index was 86 and an accident severity rate was 6.21), these values were relatively high. The road horizontal alignment condition at this location was highlighted as a sub-standard high way, consists of low visibility, numerous turning pads, minimum road signs, and minimum road shoulders width. The technical strategy was then drawn as follow; conducting regular road rehabilitation and maintenance, equipping road markings and the street lights as well as road safety facilities based on the green technology such as solar cell traffic lights, solar cell street lights and deploying police statues in reducing traffic accidents within the black spot areas.

Road sign recognition with fuzzy adaptive pre-processing models.

PubMed

Lin, Chien-Chuan; Wang, Ming-Shi

2012-01-01

A road sign recognition system based on adaptive image pre-processing models using two fuzzy inference schemes has been proposed. The first fuzzy inference scheme is to check the changes of the light illumination and rich red color of a frame image by the checking areas. The other is to check the variance of vehicle's speed and angle of steering wheel to select an adaptive size and position of the detection area. The Adaboost classifier was employed to detect the road sign candidates from an image and the support vector machine technique was employed to recognize the content of the road sign candidates. The prohibitory and warning road traffic signs are the processing targets in this research. The detection rate in the detection phase is 97.42%. In the recognition phase, the recognition rate is 93.04%. The total accuracy rate of the system is 92.47%. For video sequences, the best accuracy rate is 90.54%, and the average accuracy rate is 80.17%. The average computing time is 51.86 milliseconds per frame. The proposed system can not only overcome low illumination and rich red color around the road sign problems but also offer high detection rates and high computing performance.

Road Sign Recognition with Fuzzy Adaptive Pre-Processing Models

PubMed Central

Lin, Chien-Chuan; Wang, Ming-Shi

2012-01-01

A road sign recognition system based on adaptive image pre-processing models using two fuzzy inference schemes has been proposed. The first fuzzy inference scheme is to check the changes of the light illumination and rich red color of a frame image by the checking areas. The other is to check the variance of vehicle's speed and angle of steering wheel to select an adaptive size and position of the detection area. The Adaboost classifier was employed to detect the road sign candidates from an image and the support vector machine technique was employed to recognize the content of the road sign candidates. The prohibitory and warning road traffic signs are the processing targets in this research. The detection rate in the detection phase is 97.42%. In the recognition phase, the recognition rate is 93.04%. The total accuracy rate of the system is 92.47%. For video sequences, the best accuracy rate is 90.54%, and the average accuracy rate is 80.17%. The average computing time is 51.86 milliseconds per frame. The proposed system can not only overcome low illumination and rich red color around the road sign problems but also offer high detection rates and high computing performance. PMID:22778650

Streamflow gains and losses along San Francisquito Creek and characterization of surface-water and ground-water quality, southern San Mateo and northern Santa Clara counties, California, 1996-97

USGS Publications Warehouse

Metzger, Loren F.

2002-01-01

San Francisquito Creek is an important source of recharge to the 22-square-mile San Francisquito Creek alluvial fan ground-water subbasin in the southern San Mateo and northern Santa Clara Counties of California. Ground water supplies as much as 20 percent of the water to some area communities. Local residents are concerned that infiltration and consequently ground-water recharge would be reduced if additional flood-control measures are implemented along San Francisquito Creek. To improve the understanding of the surface-water/ground-water interaction between San Francisquito Creek and the San Francisquito Creek alluvial fan, the U.S. Geological Survey (USGS) estimated streamflow gains and losses along San Francisquito Creek and determined the chemical quality and isotopic composition of surface and ground water in the study area.Streamflow was measured at 13 temporary streamflow-measurement stations to determine streamflow gains and losses along a 8.4-mile section of San Francisquito Creek. A series of five seepage runs between April 1996 and May 1997 indicate that losses in San Francisquito Creek were negligible until it crossed the Pulgas Fault at Sand Hill Road. Streamflow losses increased between Sand Hill Road and Middlefield Road where the alluvial deposits are predominantly coarse-grained and the water table is below the bottom of the channel. The greatest streamflow losses were measured along a 1.8-mile section of the creek between the San Mateo Drive bike bridge and Middlefield Road; average losses between San Mateo Drive and Alma Street and from there to Middlefield Road were 3.1 and 2.5 acre-feet per day, respectively.Downstream from Middlefield Road, streamflow gains and losses owing to seepage may be masked by urban runoff, changes in bank storage, and tidal effects from San Francisco Bay. Streamflow gains measured between Middlefield Road and the 1200 block of Woodland Avenue may be attributable to urban runoff and (or) ground-water inflow. Water-level measurements from nearby wells indicate that the regional water table may coincide with the channel bottom along this reach of San Francisquito Creek, particularly during the winter and early spring when water levels usually reach their maximum. Streamflow losses resumed below the 1200 block of Woodland Avenue, extending downstream to Newell Road. Discharge from a large storm drain between Newell Road and East Bayshore Road may account for the streamflow gains measured between these sites. Streamflow gains were measured between East Bayshore Road and the Palo Alto Municipal Golf Course, but this reach is difficult to characterize because of the probable influence of high tides.Estimated average streamflow losses totaled approximately 1,050 acre-feet per year for the reaches between USGS stream gage 11164500 at Stanford University (upstream of Junipero Serra Boulevard) and the Palo Alto Municipal Golf Course, including approximately 595 acre-feet per year for the 1.8-mile section between San Mateo Drive and Middlefield Road. Approximately 58 percent, or 550 acre-feet, of the total estimated average annual recharge from San Francisquito Creek occurs between the San Mateo Drive and Middlefield Road sites.The chemical composition of San Francisquito Creek water varies as a function of seasonal changes in hydrologic conditions. Measurements of specific conductance indicate that during dry weather and low flow, the dissolved-solids concentrations tends to be high, and during wet weather, the concentration tends to be low owing to dilution by surface water. Compared with water samples from upstream sites at USGS stream gage 11164500 and San Mateo Drive, the samples from the downstream sites at Alma Street and Woodland Avenue had low specific conductance; low concentrations of magnesium, sodium, sulfate, chloride, boron, and total dissolved solids; high nutrient concentrations; and light isotopic compositions indicating that urban runoff constitutes most of the streamflow

Review of Global Menace of Road Accidents with Special Reference to Malaysia- A Social Perspective

PubMed Central

Kareem, Abdul

2003-01-01

Road accident is ‘a global tragedy’ with ever-rising trend. The goal of this article includes review of the causes and nature of accidents, statistical data regarding road accidents and the economical impact. 1.17 million deaths occur each year worldwide due to road accidents 70 % of which occur in developing countries. 65% of deaths involve pedestrians, 35 % of which are children. Estimates suggest that 23–34 million people are injured worldwide every year in road crashes - a value almost twice that previously estimated. It is estimated that more than 200 U.S. citizens die each year due to road accidents abroad. Every year in Europe, more than 50,000 peoples are killed in road accidents, and more than 150,000 remain disabled. It is a sad fact that the total number of road accidents in Malaysia exceeded 223,000 in 1999. On the average, 16 persons died from these road accidents, every single day in 1999. Lack of attention, reckless driving, lack of proper protection, speeding, bad personal habits, social and behavioral misconduct and inconsiderate drivers of larger vehicles are some of the problems that cause accidents. In Malaysia, motorcycle fatal accidents (60%) warrant a high degree of concern. Young children and senior citizens are found to be in the vulnerable age group. In Malaysia, in 1999 alone, general insurers paid RM1.67 billion or an average of RM4.6 million a day on motor claims. It is now recognized that road traffic accidents represent a major public health problem, because of the high number of victims involved and because of the seriousness of the consequences for themselves and for their families. PMID:23386795

Road traffic injuries to children during the school commute in Hyderabad, India: cross-sectional survey.

PubMed

Tetali, Shailaja; Edwards, P; Murthy, G V S; Roberts, I

2016-06-01

India is motorising rapidly. With increasing motorisation, road traffic injuries are predicted to increase. A third of a billion children travel to school every day in India, but little is known about children's safety during the school commute. We investigated road traffic injury to children during school journeys. We conducted a cross-sectional survey in Hyderabad using a two-stage stratified cluster sampling design. We used school travel questionnaires to record any road injury in the past 12 months that resulted in at least 1 day of school missed or required treatment by a doctor or nurse. We estimated the prevalence of road injury by usual mode of travel and distance to school. The total sample was 5842 children, of whom 5789 (99.1%) children answered the question on road injury. The overall prevalence of self-reported road injury in the last 12 months during school journeys was 17% (95% CI 12.9% to 21.7%). A higher proportion of boys (25%) reported a road injury than girls (11%). There was a strong association between road injury, travel mode and distance to school. Children who cycled to school were more likely to be injured compared with children who walked (OR 1.5; 95% CI 1.2 to 2.0). Travel by school bus was safer than walking (OR 0.5; 95% CI 0.3 to 0.9). A sixth of the children reported a road traffic injury in the past 12 months during school journeys in Hyderabad. Injury prevention interventions should focus on making walking and cycling safer for children. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Road traffic injuries to children during the school commute in Hyderabad, India: cross-sectional survey

PubMed Central

Tetali, Shailaja; Murthy, G V S; Roberts, I

2016-01-01

Background India is motorising rapidly. With increasing motorisation, road traffic injuries are predicted to increase. A third of a billion children travel to school every day in India, but little is known about children's safety during the school commute. We investigated road traffic injury to children during school journeys. Methods We conducted a cross-sectional survey in Hyderabad using a two-stage stratified cluster sampling design. We used school travel questionnaires to record any road injury in the past 12 months that resulted in at least 1 day of school missed or required treatment by a doctor or nurse. We estimated the prevalence of road injury by usual mode of travel and distance to school. Results The total sample was 5842 children, of whom 5789 (99.1%) children answered the question on road injury. The overall prevalence of self-reported road injury in the last 12 months during school journeys was 17% (95% CI 12.9% to 21.7%). A higher proportion of boys (25%) reported a road injury than girls (11%). There was a strong association between road injury, travel mode and distance to school. Children who cycled to school were more likely to be injured compared with children who walked (OR 1.5; 95% CI 1.2 to 2.0). Travel by school bus was safer than walking (OR 0.5; 95% CI 0.3 to 0.9). Conclusions A sixth of the children reported a road traffic injury in the past 12 months during school journeys in Hyderabad. Injury prevention interventions should focus on making walking and cycling safer for children. PMID:26701985

Assessment of propeller and off-road vehicle scarring in seagrass beds and wind-tidal flats of the southwestern Gulf of Mexico

USGS Publications Warehouse

Martin, S.R.; Onuf, C.P.; Dunton, K.H.

2008-01-01

We used aerial photography and GIS to establish a quantitative baseline of propeller and off-road vehicle (ORV) scarring in seagrass and wind-tidal flats of the upper Laguna Madre in the Padre Island National Seashore (Texas, USA). We also examined scar recovery through comparison of recent (2002, 2005) and historical (1967) aerial photographs of the study area. Scarring intensity was calculated using two different methods. In the first, polygons were visually drawn around groups of scars on digital images. Scarring intensity was estimated as light (20%), based on the total coverage of scars within each polygon (taking into account the length, width, and density of scars). We developed a more objective method that employed creation of vector grid cells and buffers that incorporated the localized ecological impact of scars. Results of spatial and temporal analysis revealed that the polygon approach greatly underestimated the magnitude of scarring. For example, in a single photograph, 7% of seagrass area was lightly scarred according to the polygon method; but light scarring increased to 51% according to grid analysis of the same image. Our results also indicated that propeller scars in Halodule wrightii beds appear to recover in less than three years and ORV tracks have persisted in the wind-tidal flats for at least 38 years. Our approach provides resource managers with procedures for a more objective and efficient assessment of physical disturbances to seagrass and wind-tidal flats caused by boats and ORVs. ?? 2008 by Walter de Gruyter.

Crotalus oreganus lutosus (Great Basin Rattlesnake). Defensive behavior/head hiding and tongue display

USGS Publications Warehouse

Johnson, Alexander K.; Medica, Phil A.

2017-01-01

A variety of snake species employ head hiding as defensive behavior (Greene 1973. J. Herpetol. 7:143–161), but such behavior seems to be rarely observed in rattlesnakes. A recent report (Medica 2009. Herpetol. Rev. 40:95–97) presented observations on Crotalus scutulatus scutulatus and cited cases of similar behavior involving C. atrox, C. ruber, and C. viridis viridis. Here we report an encounter on 28 May 2016 with a C. oreganus lutosus (total length ca. 900 mm) observed 16 km S of Fallon, Churchill County, Nevada, USA. At 0925 h this snake was spotted by AKJ near the edge of the pavement on U.S. Hwy. 95. When approached, the snake presented typical active defensive behavior, with the rattle elevated (although not rattling), striking occasionally, and frequently flicking its conspicuous lavender and black tongue. As AKJ continued to take pictures the snake coiled more tightly (Fig. 1A), maintaining its rattle concealed and finally hiding its head beneath its coils (Fig. 1B). After photographing this pose AKJ made his first physical contact with the snake by scooping it up with a small shovel and placing it off the road. At this point the snake recovered its feisty attitude and would not retreat despite attempts to move it further away from the road. The snake did not rattle during the entire encounter (which lasted less than 5 min). Head hiding as a “last resort” in response to a persistent unavoidable threat may be more widespread within the family Crotalidae than previously documented.

Respiratory hospitalizations of children and residential exposure to traffic air pollution in Jerusalem.

PubMed

Nirel, Ronit; Schiff, Michal; Paltiel, Ora

2015-01-01

Although exposure to traffic-related air pollution has been reported to be associated with respiratory morbidity in children, this association has not been examined in Israel. Jerusalem is ranked among the leading Israeli cities in transport-related air pollution. This case-control study examined whether pediatric hospitalization for respiratory diseases in Jerusalem is related to residential exposure to traffic-related air pollution. Cases (n=4844) were Jerusalem residents aged 0-14 years hospitalized for respiratory illnesses between 2000 and 2006. These were compared to children admitted electively (n=2161) or urgently (n=3085) for non-respiratory conditions. Individual measures of exposure included distance from residence to nearest main road, the total length of main roads, traffic volume, and bus load within buffers of 50, 150, and 300m around each address. Cases were more likely to have any diesel buses passing within 50m of their home (adjusted odds ratios=1.16 and 1.10, 95% confidence intervals 1.04-1.30 and 1.01-1.20 for elective and emergency controls, respectively). Our findings indicated that older girls (5-14) and younger boys (0-4) had increased risks of respiratory hospitalization, albeit with generally widened confidence intervals due to small sample sizes. Our results add to the limited body of evidence regarding associations between diesel exhaust particles and respiratory morbidity. The findings also point to possible differential associations between traffic-related air pollution and pediatric hospitalization among boys and girls in different age groups. Copyright © 2014 Elsevier GmbH. All rights reserved.

Epidemiology of Traumatic Injuries at an Urban Hospital in Port-au-Prince, Haiti.

PubMed

Zuraik, Christopher; Sampalis, John

2017-11-01

Traumatic injuries represent a major burden of disease worldwide. Haiti lacks statistics on the epidemiology of traumatic injuries, as there is no formal injury surveillance program. This study will assess the burden of traumatic injuries in an urban trauma center in the capital city of Port-au-Prince, Haiti. A retrospective, cross-sectional chart review study at an urban trauma hospital was carried out for the period December 1, 2015, to January 31, 2016. Data were obtained through the hospital's main patient logbook, medical charts, and trauma registry forms. Data on medical documentation, demographics, and injury characteristics were collected and analyzed using descriptive statistics. A total of 410 patients were evaluated for treatment of traumatic injuries during the 2-month study. The mean age in years was 30, with 66.3% male and 78.4% less than 41 years of age. There were 6.6 injuries per day and no correlation between frequency of injury and day of the week. Road traffic accidents accounted for 43.0% of trauma modes. The mean and median length of stay were 6.6 and 3.0 days. 9.0% of patients suffered severe trauma (ISS ≥ 16). 21.0% of patients with traumatic brain injury suffered severe head injuries. Extremity trauma was the most frequently injured anatomical region (50.0%). 22.7% of patients were admitted, and 15.1% patients underwent at least one surgical procedure. Road traffic accidents are the primary reason for injury; thus, prevention initiatives and improved trauma care may provide substantial public health benefits.

Bio fuel ash in a road construction: impact on soil solution chemistry.

PubMed

Thurdin, R T; van Hees, P A W; Bylund, D; Lundström, U S

2006-01-01

Limited natural resources and landfill space, as well as increasing amounts of ash produced from incineration of bio fuel and municipal solid waste, have created a demand for useful applications of ash, of which road construction is one application. Along national road 90, situated about 20 km west of Sollefteå in the middle of Sweden, an experiment road was constructed with a 40 cm bio fuel ash layer. The environmental impact of the ash layer was evaluated from soil solutions obtained by centrifugation of soil samples taken on four occasions during 2001-2003. Soil samples were taken in the ash layer, below the ash layer at two depths in the road and in the ditch. In the soil solutions, pH, conductivity, dissolved organic carbon (DOC) and the total concentration of cations (metals) and anions were determined. Two years after the application of the ash layers in the test road, the concentrations in the ash layer of K, SO4, Zn, and Hg had increased significantly while the concentration of Se, Mo and Cd had decreased significantly. Below the ash layer in the road an initial increase of pH was observed and the concentrations of K, SO4, Se, Mo and Cd increased significantly, while the concentrations of Cu and Hg decreased significantly in the road and also in the ditch. Cd was the element showing a potential risk of contamination of the groundwater. The concentrations of Ca in the ash layer indicated an ongoing hardening, which is important for the leaching rate and the strength of the road construction.

Open top culverts as an alternative drainage system to minimize ecological effects in earth roads.

NASA Astrophysics Data System (ADS)

García, Jose L.; Elorrieta, Jose; Robredo, Jose C.; García, Ricardo; García, Fernando; Gimenez, Martin C.

2013-04-01

During the last fifteen years a research team from School of Forestry at the Technical University of Madrid (Spain) has developed several competitive research projects regarding forest roads and open top culverts. A first approach was established with a prototype of 7 meters length in a hydraulic channel at the laboratory determining main parameters of different open top culverts in relation to different sizes of gravels and the self washing properties relationship with different slopes up to 8 %. The curves obtained may help to properly install these drainage systems avoiding maintenance costs. In addition more targeted pilot studies were developed in different forest earth roads in center and north Spain. The construction of the stations under study was financed by the U.P.M and the R&D National Plan. The main outcomes relates the low variation of humidity in a 20 m. wide range at both sides of the open top culverts and several considerations relating the angle of installation, the spacing of such drainage systems and the benefits against rilling along the roads. Also the erosion produced downhill was established and some construction methods to avoid adverse ecological effects. The diffusion of results includes congresses and a small booklet with a great acceptance in forestry services. Also a patent (ES 2 262 437) of an advanced model has been registered.

A review of models relevant to road safety.

PubMed

Hughes, B P; Newstead, S; Anund, A; Shu, C C; Falkmer, T

2015-01-01

It is estimated that more than 1.2 million people die worldwide as a result of road traffic crashes and some 50 million are injured per annum. At present some Western countries' road safety strategies and countermeasures claim to have developed into 'Safe Systems' models to address the effects of road related crashes. Well-constructed models encourage effective strategies to improve road safety. This review aimed to identify and summarise concise descriptions, or 'models' of safety. The review covers information from a wide variety of fields and contexts including transport, occupational safety, food industry, education, construction and health. The information from 2620 candidate references were selected and summarised in 121 examples of different types of model and contents. The language of safety models and systems was found to be inconsistent. Each model provided additional information regarding style, purpose, complexity and diversity. In total, seven types of models were identified. The categorisation of models was done on a high level with a variation of details in each group and without a complete, simple and rational description. The models identified in this review are likely to be adaptable to road safety and some of them have previously been used. None of systems theory, safety management systems, the risk management approach, or safety culture was commonly or thoroughly applied to road safety. It is concluded that these approaches have the potential to reduce road trauma. Copyright © 2014 Elsevier Ltd. All rights reserved.

Mobilisation of traffic-derived trace metals from road corridors into coastal stream and estuarine sediments, Cairns, northern Australia

NASA Astrophysics Data System (ADS)

Pratt, C.; Lottermoser, B. G.

2007-04-01

This investigation revealed the presence of traffic-derived metals within road, stream and estuarine sediments collected from a coastal catchment, northern Australia. Studied road sediments displayed variable total metal concentrations (median Cd, Cu, Pb, Pd, Pt, Ni and Zn values: 0.19, 42.6, 67.5, 0.064, 0.104, 36.7 and 698 mg/kg, respectively). The distinctly elevated Zn values are due to abundant tyre rubber shreds (as verified by SEM-EDS and correlation analysis). By comparison to the road sediments, background stream sediments taken upstream from roads have relatively low median Pb, Pd, Pt and Zn concentrations (7.3 mg/kg Pb, 0.01 mg/kg Pd, 0.012 mg/kg Pt, 62 mg/kg Zn). Stream and estuarine sediment samples collected below roads have median values of 21.8 mg/kg Pb, 0.014 mg/kg Pd, 0.021 mg/kg Pt and 71 mg/kg Zn, and exhibit 207Pb/206Pb and 208Pb/206Pb ratios that appear on a mixing line between the isotopically distinct background stream sediments and the road sediments. Thus, mobilisation of dusts and sediments from road surfaces has resulted in relatively elevated Pb, Pd, Pt and Zn concentrations and non-radiogenic Pb isotope ratios in local coastal stream and estuarine sediments. The investigation demonstrates that traffic-derived metals enter coastal stream and estuary sediments at the fringe of the Great Barrier Reef lagoon.

Map showing geochemistry of stream sediments in the Jerry Peak Wilderness Study Area, Custer County, Idaho

USGS Publications Warehouse

Callahan, J.E.; McIntyre, D.H.; Cooley, E.F.; Cookro, T.M.

1984-01-01

The Jerry Peak Wilderness Study Area is about 25 mi south of Challis in Custer County, central Idaho (fig. 1). The study area contains 46,150 acres of land administered by the by the Bureau of Land Management and 1 sq mi owned by the State of Idaho, a total of 46,790 acres. Most of the study area is readily accessible by roads along tributaries of the East Fork Salmon River, especially Road Creek, Herd Creek, and Lake Creek. The southeastern part of the area can be reached from Road Creek by the road down Peck's Canyon and by roads from Thousand Springs Valley, southeast of the study area. Several access roads to past logging operations extend up Sage Creek and its tributaries in the southeast part of the study area. Access to points within the northern part of the area is facilitated by jeep trails that connect with Road Creek and lake Creek and by improved road that extends northward from Herd Lake. The study area is moderately rugged, with local relief approaching 2,000 ft. Jerry (10,010 ft), the highest point within the area, is a low knoll on a north-trending linear ridge (fig. 1). The ridge has not been glaciated, despite its relatively high altitude. Most of the area is thinly covered by grass and low shrubs; trees, for the most part, are restricted to valley bottoms or to local, small groves on hillslopes.

The influence of age, seat belt, time of day, and type of vehicles on road accidents in Kerman, Iran.

PubMed

Mohammadi, Ghorbanali

2009-04-01

Traffic accidents are one of the main external causes of morbidity and mortality in various parts of the world, including Kerman, a city that has experienced rapid growth in the number of cars in the last 5 years. The objective of this article was to identify the influence of age, belt use, time of day, and type of vehicle road accidents of southeastern Iran. This study used data obtained from Kerman police force reports on incidents of road traffic accidents (RTAs). We analyzed the police reports of total road accidents that occurred from 2005 to 2007. The involvement in fatal and non-fatal accidents was determined for females than among males. The analysis of the data indicated that the female drivers have a much better road safety record than male drivers, especially with regards to their involvement in severe traffic accidents. Forty-nine percent of accidents involve passenger cars, which is higher than other type of vehicles. Female drivers were found to be generally safer drivers than their male counterparts; male drivers who did not use seat belts had a higher involvement rate in road traffic accidents. Time of day analyses suggested that the problems of accidents in darkness are not a matter of visibility but a consequence of the way drivers use the roads at night. A number of recommended measures for the improvement of road safety in southeastern Iran are suggested.

Ions in motor vehicle exhaust and their dispersion near busy roads

NASA Astrophysics Data System (ADS)

Jayaratne, E. R.; Ling, X.; Morawska, L.

2010-09-01

Measurements in the exhaust plume of a petrol-driven motor car showed that molecular cluster ions of both signs were present in approximately equal amounts. The emission rate increased sharply with engine speed while the charge symmetry remained unchanged. Measurements at the kerbside of nine motorways and five city roads showed that the mean total cluster ion concentration near city roads (603 cm -3) was about one-half of that near motorways (1211 cm -3) and about twice as high as that in the urban background (269 cm -3). Both positive and negative ion concentrations near a motorway showed a significant linear increase with traffic density ( R2 = 0.3 at p < 0.05) and correlated well with each other in real time ( R2 = 0.87 at p < 0.01). Heavy duty diesel vehicles comprised the main source of ions near busy roads. Measurements were conducted as a function of downwind distance from two motorways carrying around 120-150 vehicles per minute. Total traffic-related cluster ion concentrations decreased rapidly with distance, falling by one-half from the closest approach of 2 m to 5 m of the kerb. Measured concentrations decreased to background at about 15 m from the kerb when the wind speed was 1.3 m s -1, this distance being greater at higher wind speed. The number and net charge concentrations of aerosol particles were also measured. Unlike particles that were carried downwind to distances of a few hundred metres, cluster ions emitted by motor vehicles were not present at more than a few tens of metres from the road.

Cities, traffic, and CO2: A multidecadal assessment of trends, drivers, and scaling relationships

PubMed Central

Gately, Conor K.; Hutyra, Lucy R.; Sue Wing, Ian

2015-01-01

Emissions of CO2 from road vehicles were 1.57 billion metric tons in 2012, accounting for 28% of US fossil fuel CO2 emissions, but the spatial distributions of these emissions are highly uncertain. We develop a new emissions inventory, the Database of Road Transportation Emissions (DARTE), which estimates CO2 emitted by US road transport at a resolution of 1 km annually for 1980–2012. DARTE reveals that urban areas are responsible for 80% of on-road emissions growth since 1980 and for 63% of total 2012 emissions. We observe nonlinearities between CO2 emissions and population density at broad spatial/temporal scales, with total on-road CO2 increasing nonlinearly with population density, rapidly up to 1,650 persons per square kilometer and slowly thereafter. Per capita emissions decline as density rises, but at markedly varying rates depending on existing densities. We make use of DARTE’s bottom-up construction to highlight the biases associated with the common practice of using population as a linear proxy for disaggregating national- or state-scale emissions. Comparing DARTE with existing downscaled inventories, we find biases of 100% or more in the spatial distribution of urban and rural emissions, largely driven by mismatches between inventory downscaling proxies and the actual spatial patterns of vehicle activity at urban scales. Given cities’ dual importance as sources of CO2 and an emerging nexus of climate mitigation initiatives, high-resolution estimates such as DARTE are critical both for accurately quantifying surface carbon fluxes and for verifying the effectiveness of emissions mitigation efforts at urban scales. PMID:25847992

Comparison of heavy metal loads in stormwater runoff from major and minor urban roads using pollutant yield rating curves.

PubMed

Davis, Brett; Birch, Gavin

2010-08-01

Trace metal export by stormwater runoff from a major road and local street in urban Sydney, Australia, is compared using pollutant yield rating curves derived from intensive sampling data. The event loads of copper, lead and zinc are well approximated by logarithmic relationships with respect to total event discharge owing to the reliable appearance of a first flush in pollutant mass loading from urban roads. Comparisons of the yield rating curves for these three metals show that copper and zinc export rates from the local street are comparable with that of the major road, while lead export from the local street is much higher, despite a 45-fold difference in traffic volume. The yield rating curve approach allows problematic environmental data to be presented in a simple yet meaningful manner with less information loss. Copyright 2010 Elsevier Ltd. All rights reserved.

Examining Associations of Environmental Characteristics with Recreational Cycling Behaviour by Street-Level Strava Data

PubMed Central

Sun, Yeran; Du, Yunyan; Wang, Yu; Zhuang, Liyuan

2017-01-01

Policymakers pay much attention to effectively increasing frequency of people’s cycling in the context of developing sustainable and green cities. Investigating associations of environmental characteristics and cycling behaviour could offer implications for changing urban infrastructure aiming at encouraging active travel. However, earlier examinations of associations between environmental characteristics and active travel behaviour are limited by low spatial granularity and coverage of traditional data. Crowdsourced geographic information offers an opportunity to determine the fine-grained travel patterns of people. Particularly, Strava Metro data offer a good opportunity for studies of recreational cycling behaviour as they can offer hourly, daily or annual cycling volumes with different purposes (commuting or recreational) in each street across a city. Therefore, in this study, we utilised Strava Metro data for investigating associations between environmental characteristics and recreational cycling behaviour at a large spatial scale (street level). In this study, we took account of population density, employment density, road length, road connectivity, proximity to public transit services, land use mix, proximity to green space, volume of motor vehicles and traffic accidents in an empirical investigation over Glasgow. Empirical results reveal that Strava cyclists are more likely to cycle for recreation on streets with short length, large connectivity or low volume of motor vehicles or on streets surrounded by residential land. PMID:28617345

Examining Associations of Environmental Characteristics with Recreational Cycling Behaviour by Street-Level Strava Data.

PubMed

Sun, Yeran; Du, Yunyan; Wang, Yu; Zhuang, Liyuan

2017-06-15

Policymakers pay much attention to effectively increasing frequency of people's cycling in the context of developing sustainable and green cities. Investigating associations of environmental characteristics and cycling behaviour could offer implications for changing urban infrastructure aiming at encouraging active travel. However, earlier examinations of associations between environmental characteristics and active travel behaviour are limited by low spatial granularity and coverage of traditional data. Crowdsourced geographic information offers an opportunity to determine the fine-grained travel patterns of people. Particularly, Strava Metro data offer a good opportunity for studies of recreational cycling behaviour as they can offer hourly, daily or annual cycling volumes with different purposes (commuting or recreational) in each street across a city. Therefore, in this study, we utilised Strava Metro data for investigating associations between environmental characteristics and recreational cycling behaviour at a large spatial scale (street level). In this study, we took account of population density, employment density, road length, road connectivity, proximity to public transit services, land use mix, proximity to green space, volume of motor vehicles and traffic accidents in an empirical investigation over Glasgow. Empirical results reveal that Strava cyclists are more likely to cycle for recreation on streets with short length, large connectivity or low volume of motor vehicles or on streets surrounded by residential land.

Nocturnal Road Traffic Noise Exposure and Children’s Sleep Duration and Sleep Problems

PubMed Central

Weyde, Kjell Vegard; Krog, Norun Hjertager; Oftedal, Bente; Evandt, Jorunn; Magnus, Per; Øverland, Simon; Clark, Charlotte; Stansfeld, Stephen; Aasvang, Gunn Marit

2017-01-01

Almost half of the European Union (EU)’s population is exposed to road traffic noise above levels that constitute a health risk. Associations between road traffic noise and impaired sleep in adults have consistently been reported. Less is known about effects of noise on children’s sleep. The aim of this study was to examine the association between nocturnal road traffic noise exposure and children’s parental-reported sleep duration and sleep problems. The present cross-sectional study used data from The Norwegian Mother and Child Cohort Study. Parental report of children’s sleep duration and sleep problems at age 7 was linked to modelled levels of residential night-time road traffic noise. The study population included 2665 children from Oslo, Norway. No association was found between road traffic noise and sleep duration in the total study population (odds ratio (OR): 1.05, 95% confidence interval (CI): [0.94, 1.17]), but a statistically significant association was observed in girls (OR: 1.21, 95% CI: [1.04, 1.41]). For sleep problems, the associations were similar (OR: 1.36, 95% CI: [0.85, 2.16]) in girls. The ORs are presented for an increase of 10 dB. The findings suggest there is an association between road traffic noise and sleep for girls, underlining the importance of protecting children against excessive noise levels. PMID:28481249

Automatic Generalizability Method of Urban Drainage Pipe Network Considering Multi-Features

NASA Astrophysics Data System (ADS)

Zhu, S.; Yang, Q.; Shao, J.

2018-05-01

Urban drainage systems are indispensable dataset for storm-flooding simulation. Given data availability and current computing power, the structure and complexity of urban drainage systems require to be simplify. However, till data, the simplify procedure mainly depend on manual operation that always leads to mistakes and lower work efficiency. This work referenced the classification methodology of road system, and proposed a conception of pipeline stroke. Further, length of pipeline, angle between two pipelines, the pipeline belonged road level and diameter of pipeline were chosen as the similarity criterion to generate the pipeline stroke. Finally, designed the automatic method to generalize drainage systems with the concern of multi-features. This technique can improve the efficiency and accuracy of the generalization of drainage systems. In addition, it is beneficial to the study of urban storm-floods.

Three 3-axis accelerometers fixed inside the tyre for studying contact patch deformations in wet conditions

NASA Astrophysics Data System (ADS)

Niskanen, Arto J.; Tuononen, Ari J.

2014-05-01

The tyre-road contact area was studied visually by means of a high-speed camera and three accelerometers fixed to the inner liner of the tyre carcass. Both methods show a distorted contact area in wet conditions, but interesting differences appeared. First, the contact area in full aquaplaning seems strongly distorted on a glass plate when subjected to visual inspection, while the accelerometers indicate a more even hydrodynamic aquaplaning contact length (CL) across the tyre width. Secondly, the acceleration sensors predict the clear shortening of the CL of the tyre before the critical aquaplaning speed. It can be concluded that the visual contact area and shape are heavily dependent on the transparency of the liquid and smoothness of the glass. Meanwhile, the tyre sensors can provide a CL estimate on any road surface imaginable.

Investigation of the impact of low cost traffic engineering measures on road safety in urban areas.

PubMed

Yannis, George; Kondyli, Alexandra; Georgopoulou, Xenia

2014-01-01

This paper investigates the impact of low cost traffic engineering measures (LCTEMs) on the improvement of road safety in urban areas. A number of such measures were considered, such as speed humps, woonerfs, raised intersections and other traffic calming measures, which have been implemented on one-way, one-lane roads in the Municipality of Neo Psychiko in the Greater Athens Area. Data were analysed using the before-and-after safety analysis methodology with large control group. The selected control group comprised of two Municipalities in the Athens Greater Area, which present similar road network and land use characteristics with the area considered. The application of the methodology showed that the total number of crashes presented a statistically significant reduction, which can be possibly attributed to the introduction of LCTEMs. This reduction concerns passenger cars and single-vehicle crashes and is possibly due to the behavioural improvement of drivers of 25 years old or more. The results of this research are very useful for the identification of the appropriate low cost traffic engineering countermeasures for road safety problems in urban areas.

Spatial-temporal patterns in Mediterranean carnivore road casualties: Consequences for mitigation

USGS Publications Warehouse

Grilo, C.; Bissonette, J.A.; Santos-Reis, M.

2009-01-01

Many carnivores have been seriously impacted by the expansion of transportation systems and networks; however we know little about carnivore response to the extent and magnitude of road mortality, or which age classes may be disproportionately impacted. Recent research has demonstrated that wildlife-vehicle-collisions (WVC) involving carnivores are modulated by temporal and spatial factors. Thus, we investigated road mortality on a guild of small and medium-sized carnivores in southern Portugal using road-kill data obtained from a systematic 36 months monitoring period along highways (260 km) and national roads (314 km) by addressing the following questions: (a) which species and age class are most vulnerable to WVC? (b) are there temporal and/or spatial patterns in road-kill? and (c) which life-history and/or spatial factors influence the likelihood of collisions? We recorded a total of 806 carnivore casualties, which represented an average of 47 ind./100 km/year. Red fox and stone marten had the highest mortality rates. Our findings highlight three key messages: (1) the majority of road-killed individuals were adults of common species; (2) all carnivores, except genets, were more vulnerable during specific life-history phenological periods: higher casualties were observed when red fox and stone marten were provisioning young, Eurasian badger casualties occurred more frequently during dispersal, and higher Egyptian mongoose mortality occurred during the breeding period; and (3) modeling demonstrated that favorable habitat, curves in the road, and low human disturbance were major contributors to the deadliest road segments. Red fox carcasses were more likely to be found on road sections with passages distant from urban areas. Conversely, stone marten mortalities were found more often on national roads with high of cork oak woodland cover; Egyptian mongoose and genet road-kills were found more often on road segments close to curves. Based on our results, two key mitigation measures should help to reduce WVC in Portugal. The first involves the improvement of existing crossings with buried and small mesh size fence to guide the individuals towards to the passages, in road segments with high traffic volume (>1200 vehicles/night) and located in preferred carnivore habitats. The second mitigation involves cutting or removal of dense vegetation in verges of road segments with curves to aid motorists in seeing animals about to cross. ?? 2008 Elsevier Ltd.

The penalty points system in Ireland - Does it remain effective 14 years on?

PubMed

Downey, C; Donnelly, M

2018-06-01

Road traffic accidents (RTAs) are the leading cause of trauma related mortality in Ireland. The penalty points system (PPS) was introduced in Ireland in 2002 to incentivise safer driving and reduce injury. Its early effect was studied previously 1 which concluded that there was a slight reduction in RTA related femoral shaft fractures (a sensitive indicator of high energy trauma) and a dramatic reduction in RTA related discharges. We hypothesized that over the following 14 years, the penalty points system might lose its effectiveness. Data was again collected from the same HIPE departments from six Dublin teaching hospitals and also University Hospital Waterford (to represent both an urban and a more rural population cohort respectively) examining RTA related femoral shaft fractures over an identical 6 month period (October-April). RTA related discharge data over an identical 6 month period was again acquired and analysed from Beaumont Hospital, Dublin (identical data source to previous study). These results were compared with the identical 6 month period in 2001/02 & 2002/03 (October-April). The total number of RTA related femoral shaft fracture discharges in Dublin decreased from 16 post introduction of PPS in the 2002/03 6-month period to 7 in 2015/16 6-month period. The number remained the same in the Waterford region (n = 5). The total RTA related discharges in Beaumont Hospital, Dublin decreased from 70 post PPS introduction to 57 in the 2015/16 6-month period. This represents an incidence rate of 4.5/1000 discharges (vs 6.9 post introduction) which was a statistically significant reduction (p = 0.014). The mean length of stay for these patients reduced from 13 to 7.7 days. There were consistent reductions in head injury (major & minor), lower limb fracture and facial fracture since the introduction of the PPS. The upper limb, pelvic/acetabular and thoracic injuries remained largely unchanged. Whilst RTA related spinal and abdominal injuries decreased after the introduction of the PPS, this study shows that these injuries have unfortunately increased since the post-PPS study in 2002/03. These results further support the effectiveness of the penalty points system and at a time where road death figures are under the spotlight, endorse the efficacious strategies implemented by the road safety authority in Ireland. Copyright © 2017 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. Published by Elsevier Ltd. All rights reserved.

Obstructive sleep apnoea syndrome as a cause of road traffic accidents.

PubMed

Aguiar, M; Valença, J; Felizardo, M; Caeiro, F; Moreira, S; Staats, R; Bugalho de Almeida, A A

2009-01-01

Several studies have demonstrated that obstructive sleep apnoea syndrome (OSAS) patients have a higher rate of road traffic accidents. Our study aimed to analyse any differences in OSAS patients between those who reported having had road traffic accidents and/or near misses and those who did not. We studied 163 patients with OSAS (apnoea- hypopnoea index (AHI)>10/h) diagnosed using nocturnal polysomnography (NPSG), all drivers, 18.4% of whom drove for a living. Patients were asked at their first clinical interview to self-report road traffic accidents and/or near misses over the past 3 years which had been caused by abnormal daytime drowsiness. This allowed patients to be divided into two groups, those who had had road traffic accidents and/or near misses and those who had not. Both were compared as to age, body mass index (BMI), Epworth Sleepiness Scale (ESS), daytime PaO2 and PaCO2, Functional Outcomes of Sleep Questionnaire (FOSQ) test and NPSG data. This latter was total sleep time (TTS), sleep efficiency, sleep stages, arousal index (ARI), AHI, minimal and average SaO2, % of time with SaO2 < 90% (T90), desaturation index (ODI), total duration of apnoea-hypopnoea (TDAH) (T test). Group I (no road traffic accidents) No=89 patients; group II (road traffic accidents) No=74 patients. Age (years) was 57.6+/-11.8 vs. 54.7+/-10.9 (ns); male gender, 75% vs. 78.4%; ESS, 12.3+/-5.4 vs. 17.6+/-4.3 (p<0.001); BMI, (Kg/m2) 36.2+/-8.1 vs. 35.6+/-6.3 (ns); PaO2 (mmHg), 76.1+/-11.4 vs. 78.5+/-12.6 (ns); PaCO2 (mmHg), 42.6+/-5.1 vs. 42.2+/-4.7 (ns); FOSQ, 15.1+/-3.1 vs. 12.9+/-3.4 (p<0.001). NPSG data revealed differences only in AHI: 45.0+/-21.6 vs. 56.2+/-29.7 (p=0.01) and in TDAH (minutes), 98.5+/-63.7 vs. 133.3+/-83.2 (p=0,005). In our experience patients who had road traffic accidents and/or near misses had a more severe OSAS, with higher AHI, excessive daytime sleepiness and lower quality of life.

Distributions of typical contaminant species in urban short-term storm runoff and their fates during rain events: a case of Xiamen City.

PubMed

Wei, Qunshan; Zhu, Gefu; Wu, Peng; Cui, Li; Zhang, Kaisong; Zhou, Jingjing; Zhang, Wenru

2010-01-01

The pollutants in urban storm runoff, which lead to an non-point source contamination of water environment around cities, are of great concerns. The distributions of typical contaminants and the variations of their species in short term storm runoff from different land surfaces in Xiamen City were investigated. The concentrations of various contaminants, including organic matter, nutrients (i.e., N and P) and heavy metals, were significantly higher in parking lot and road runoff than those in roof and lawn runoff. The early runoff samples from traffic road and parking lot contained much high total nitrogen (TN 6-19 mg/L) and total phosphorus (TP 1-3 mg/L). A large proportion (around 60%) of TN existed as total dissolved nitrogen (TDN) species in most runoff. The percentage of TDN and the percentage of total dissolved phosphorus remained relatively stable during the rain events and did not decrease as dramatically as TN and TP. In addition, only parking lot and road runoff were contaminated by heavy metals, and both Pb (25-120 microg/L) and Zn (0.1-1.2 mg/L) were major heavy metals contaminating both runoff. Soluble Pb and Zn were predominantly existed as labile complex species (50%-99%), which may be adsorbed onto the surfaces of suspended particles and could be easily released out when pH decreased. This would have the great impact to the environment.

Dry paths effectively reduce road mortality of small and medium-sized terrestrial vertebrates.

PubMed

Niemi, Milla; Jääskeläinen, Niina C; Nummi, Petri; Mäkelä, Tiina; Norrdahl, Kai

2014-11-01

Wildlife passages are widely used mitigation measures designed to reduce the adverse impacts of roads on animals. We investigated whether road kills of small and medium-sized terrestrial vertebrates can be reduced by constructing dry paths adjacent to streams that pass under road bridges. The study was carried out in southern Finland during the summer of 2008. We selected ten road bridges with dry paths and ten bridges without them, and an individual dry land reference site for each study bridge on the basis of landscape and traffic features. A total of 307 dead terrestrial vertebrates were identified during the ten-week study period. The presence of dry paths decreased the amount of road-killed terrestrial vertebrates (Poisson GLMM; p < 0.001). That was true also when considering amphibians alone (p < 0.001). The evidence on road-kills on mammals was not such clear. In the mammal model, a lack of dry paths increased the amount of carcasses (p = 0.001) whereas the number of casualties at dry path bridges was comparable with dry land reference sites. A direct comparison of the dead ratios suggests an average efficiency of 79% for the dry paths. When considering amphibians and mammals alone, the computed effectiveness was 88 and 70%, respectively. Our results demonstrate that dry paths under road bridges can effectively reduce road-kills of small and medium-sized terrestrial vertebrates, even without guiding fences. Dry paths seemed to especially benefit amphibians which are a threatened species group worldwide and known to suffer high traffic mortality. Copyright © 2014 Elsevier Ltd. All rights reserved.

Finely Resolved On-Road PM2.5 and Estimated Premature Mortality in Central North Carolina.

PubMed

Chang, Shih Ying; Vizuete, William; Serre, Marc; Vennam, Lakshmi Pradeepa; Omary, Mohammad; Isakov, Vlad; Breen, Michael; Arunachalam, Saravanan

2017-12-01

To quantify the on-road PM 2.5 -related premature mortality at a national scale, previous approaches to estimate concentrations at a 12-km × 12-km or larger grid cell resolution may not fully characterize concentration hotspots that occur near roadways and thus the areas of highest risk. Spatially resolved concentration estimates from on-road emissions to capture these hotspots may improve characterization of the associated risk, but are rarely used for estimating premature mortality. In this study, we compared the on-road PM 2.5 -related premature mortality in central North Carolina with two different concentration estimation approaches-(i) using the Community Multiscale Air Quality (CMAQ) model to model concentration at a coarser resolution of a 36-km × 36-km grid resolution, and (ii) using a hybrid of a Gaussian dispersion model, CMAQ, and a space-time interpolation technique to provide annual average PM 2.5 concentrations at a Census-block level (∼105,000 Census blocks). The hybrid modeling approach estimated 24% more on-road PM 2.5 -related premature mortality than CMAQ. The major difference is from the primary on-road PM 2.5 where the hybrid approach estimated 2.5 times more primary on-road PM 2.5 -related premature mortality than CMAQ due to predicted exposure hotspots near roadways that coincide with high population areas. The results show that 72% of primary on-road PM 2.5 premature mortality occurs within 1,000 m from roadways where 50% of the total population resides, highlighting the importance to characterize near-road primary PM 2.5 and suggesting that previous studies may have underestimated premature mortality due to PM 2.5 from traffic-related emissions. © 2017 Society for Risk Analysis.

[Effects of highway on the vegetation species composition along a distance gradient from road edge in southeastern margin of Tengeer Desert].

PubMed

Feng, Li; Li, Xin-Rong; Guo, Qun; Zhang, Jing-Guang; Zhang, Zhi-Shan

2011-05-01

Aimed to examine the effects of highway on the vegetation species composition in arid desert area, forty-eight transects perpendicular to the provincial highway 201 from Shapotou to Jing-tai in the southeastern margin of Tengger Desert were installed, with the vegetation species distribution along a distance gradient from the road edge investigated. The results showed that with increasing distance from the road edge, the species number, coverage, biomass, and alpha-diversity of herbaceous plants declined, but had no significant differences with the control beyond 5 m. Within 0-6 m to the road edge, the herbaceous plant height was greater than that of the control, but their density had less change. Within 0-2 m to the road edge, the species turnover rate of herbaceous plants was lower; at 2-5m, this rate was the highest; while beyond 10 m, the species composition of herbaceous plants was similar to that of the control. The herbaceous plant community at the road edge was dominated by gramineous plants, with the disturbance-tolerant species Pennisetum centrasiaticum, Chloris virgata, and Agropyron cristatum accounting for 68.6% of the total. C. virgata beyond 1 m to the road edge had a rapid decrease in its individual number and presence frequency, P. centrasiaticum and A. cristatum beyond 2 m also showed a similar trend, while the composite plants Artemisia capillaris and A. frigida beyond 2 m from the road edge had a rapid increase in its individual number, accounting for 70% of the herbaceous plants. At the road edge, the coverage and density of shrubs were significantly lower than those of the control, but the species composition had no significant difference.

Off-Road Vehicle Crash Risk during the Six Months after a Birthday

PubMed Central

Woodfine, Jason D.; Thiruchelvam, Deva; Redelmeier, Donald A.

2016-01-01

Background Off-road vehicles are popular and thrilling for youth outside urban settings, yet sometimes result in a serious crash that requires emergency medical care. The relation between birthdays and the subsequent risk of an off-road vehicle crash is unknown. Methods We conducted a population-based before-and-after longitudinal analysis of youth who received emergency medical care in Ontario, Canada, due to an off-road vehicle crash between April 1, 2002, and March 31, 2014. We identified youth injured in an off-road vehicle crash through population-based health-care databases of individuals treated for medical emergencies. We included youth aged 19 years or younger, distinguishing juniors (age ≤ 15 years) from juveniles (age ≥ 16 years). Results A total 32,777 youths accounted for 35,202 emergencies due to off-road vehicle crashes within six months of their nearest birthday. Comparing the six months following a birthday to the six months prior to a birthday, crashes increased by about 2.7 events per 1000 juniors (18.3 vs 21.0, p < 0.0001). The difference equaled a 15% increase in relative risk (95% confidence interval 12 to 18). The increase extended for months following a birthday, was not observed for traffic crashes due to on-road vehicles, and was partially explained by a lack of helmet wearing. As expected, off-road crash risks did not change significantly following a birthday among juveniles (19.2 vs 19.8, p = 0.61). Conclusions Off-road vehicle crashes leading to emergency medical care increase following a birthday in youth below age 16 years. An awareness of this association might inform public health messages, gift-giving practices, age-related parental permissions, and prevention by primary care physicians. PMID:27695070

Particulate matter emission by a vehicle running on unpaved road

NASA Astrophysics Data System (ADS)

Williams, David Scott; Shukla, Manoj K.; Ross, Jim

2008-05-01

The particulate matter (PM) emission from unpaved roads starts with the pulverization of surface material by the force of the vehicle, uplifting and subsequent exposure of road to strong air currents behind the wheels. The objectives of the project were to: demonstrate the utility of a simple technique for collecting suspended airborne PM emitted by vehicle running on an unpaved road, determine the mass balance of airborne PM at different heights, and determine the particle size and elemental composition of PM. We collected dust samples on sticky tapes using a rotorod sampler mounted on a tower across an unpaved road located at the Leyendecker Plant Sciences Research Center, Las Cruces, NM, USA. Dust samples were collected at 1.5, 4.5 and 6 m height above the ground surface on the east and west side of the road. One rotorod sampler was also installed at the centre of the road at 6 m height. Dust samples from unpaved road were mostly (70%) silt and clay-sized particles and were collected at all heights. The height and width of the PM plume and the amount of clay-sized particles captured on both sides of the road increased with speed and particle captured ranged from 0.05 to 159 μm. Dust particles between PM10 and PM2.5 did not correlate with vehicle speed but particles ⩽PM2.5 did. Emission factors estimated for the total suspended PM were 10147 g km-1 at 48 km h-1 and 11062 g km-1 at 64 km h-1 speed, respectively. The predominant elements detected in PM were carbon, aluminum and silica at all heights. Overall, sticky tape method coupled with electron microscopy was a useful technique for a rapid particle size and elemental characterization of airborne PM.

Proximity of California public schools to busy roads.

PubMed Central

Green, Rochelle S; Smorodinsky, Svetlana; Kim, Janice J; McLaughlin, Robert; Ostro, Bart

2004-01-01

Residential proximity to busy roads has been associated with adverse health outcomes, and school location may also be an important determinant of children's exposure to traffic-related pollutants. The goal of this study was to examine the characteristics of public schools (grades K-12) in California (n = 7,460) by proximity to major roads. We determined maximum daily traffic counts for all roads within 150 m of the school using a statewide road network and a geographic information system. Statewide, 173 schools (2.3%) with a total enrollment of 150,323 students were located within 150 m of high-traffic roads (greater than or equal to 50,000 vehicles/day); 536 schools (7.2%) were within 150 m of medium-traffic roads (25,000-49,999 vehicles/day). Traffic exposure was related to race/ethnicity. For example, the overall percentage of nonwhite students was 78% at the schools located near high-traffic roads versus 60% at the schools with very low exposure (no streets with counted traffic data within 150 m). As the traffic exposure of schools increased, the percentage of both non-Hispanic black and Hispanic students attending the schools increased substantially. Traffic exposure was also related to school-based and census-tract-based socioeconomic indicators, including English language learners. The median percentage of children enrolled in free or reduced-price meal programs increased from 40.7% in the group with very low exposure to 60.5% in the highest exposure group. In summary, a substantial number of children in California attend schools close to major roads with very high traffic counts, and a disproportionate number of those students are economically disadvantaged and nonwhite. PMID:14698932

A comparative study of the grain-size distribution of surface dust and stormwater runoff quality on typical urban roads and roofs in Beijing, China.

PubMed

Shen, Zhenyao; Liu, Jin; Aini, Guzhanuer; Gong, Yongwei

2016-02-01

The deposition of pollutants on impervious surfaces is a serious problem associated with rapid urbanization, which results in non-point-source pollution. Characterizing the build-up and wash-off processes of pollutants in urban catchments is essential for urban planners. In this paper, the spatial variation and particle-size distributions of five heavy metals and two nutrients in surface dust were analyzed, and the runoff water first-flush effect (FF30) and event-mean concentrations (EMCs) of 10 common constituents were characterized. The relationships between runoff variables and stormwater characteristics were examined from three typical urban impervious surfaces in Beijing, China. Dust on road surfaces with smaller grain sizes had higher pollutant concentrations, whereas concentrations of Mn, Zn, Fe, and TP in roof surface dust increased with grain size. Particles with grain sizes of 38-74 and 125-300 μm contributed most to the total pollutant load in roads, while particles with the smallest grain sizes (<38 μm) contributed most on roofs (23.46-41.71 %). Event-mean concentrations (EMCs) and FF30 values for most runoff pollutants tended to be higher on roofs than on roads. The maximum intensity (I max) and the antecedent dry days (ADD) were critical parameters for EMCs in roads, while ADD was the only dominant parameter for EMCs on our studied roof. The rainfall intensity (RI) and maximum intensity (I max) were found to be the parameters with the strongest correlation to the first-flush effect on both roads and roofs. Significant correlations of total suspended solids (TSS) concentration in runoff with grain-size fractions of surface dust indicated that coarser particles (74-300 μm) are most likely to contribute to the solid-phase pollutants, and finer particles (<38 μm) are likely the main source of dissolved pollutants.

Primary gas- and particle-phase emissions and secondary organic aerosol production from gasoline and diesel off-road engines.

PubMed

Gordon, Timothy D; Tkacik, Daniel S; Presto, Albert A; Zhang, Mang; Jathar, Shantanu H; Nguyen, Ngoc T; Massetti, John; Truong, Tin; Cicero-Fernandez, Pablo; Maddox, Christine; Rieger, Paul; Chattopadhyay, Sulekha; Maldonado, Hector; Maricq, M Matti; Robinson, Allen L

2013-12-17

Dilution and smog chamber experiments were performed to characterize the primary emissions and secondary organic aerosol (SOA) formation from gasoline and diesel small off-road engines (SOREs). These engines are high emitters of primary gas- and particle-phase pollutants relative to their fuel consumption. Two- and 4-stroke gasoline SOREs emit much more (up to 3 orders of magnitude more) nonmethane organic gases (NMOGs), primary PM and organic carbon than newer on-road gasoline vehicles (per kg of fuel burned). The primary emissions from a diesel transportation refrigeration unit were similar to those of older, uncontrolled diesel engines used in on-road vehicles (e.g., premodel year 2007 heavy-duty diesel trucks). Two-strokes emitted the largest fractional (and absolute) amount of SOA precursors compared to diesel and 4-stroke gasoline SOREs; however, 35-80% of the NMOG emissions from the engines could not be speciated using traditional gas chromatography or high-performance liquid chromatography. After 3 h of photo-oxidation in a smog chamber, dilute emissions from both 2- and 4-stroke gasoline SOREs produced large amounts of semivolatile SOA. The effective SOA yield (defined as the ratio of SOA mass to estimated mass of reacted precursors) was 2-4% for 2- and 4-stroke SOREs, which is comparable to yields from dilute exhaust from older passenger cars and unburned gasoline. This suggests that much of the SOA production was due to unburned fuel and/or lubrication oil. The total PM contribution of different mobile source categories to the ambient PM burden was calculated by combining primary emission, SOA production and fuel consumption data. Relative to their fuel consumption, SOREs are disproportionately high total PM sources; however, the vastly greater fuel consumption of on-road vehicles renders them (on-road vehicles) the dominant mobile source of ambient PM in the Los Angeles area.

Distribution and sources of polychlorinated biphenyls in Woods Inlet, Lake Worth, Fort Worth, Texas, 2003

USGS Publications Warehouse

Besse, Richard E.; Van Metre, Peter C.; Wilson, Jennifer T.

2005-01-01

Woods Inlet is a flooded stream channel on the southern shore of Lake Worth along the western boundary of Air Force Plant 4 in Fort Worth, Texas, where elevated polychlorinated biphenyl (PCB) concentrations in sediment were detected in a previous study. In response, the U.S. Geological Survey, in cooperation with the U.S. Air Force, conducted a study in 2003 to map the extent of elevated PCB concentrations in Woods Inlet and to identify possible sources (or more specifically, source areas) of PCBs in the watershed of Woods Inlet. Three gravity cores (penetration to pre-reservoir sediment at three sites) and 17 box cores (surficial bottom sediment samples) were collected in Woods Inlet. Suspended sediment in stormwater runoff and streambed sediment were sampled in tributaries to Woods Inlet following storms. Assemblages of PCB congeners in surficial inlet sediments and suspended and streambed sediments were analyzed to indicate sources of PCBs in the inlet sediments on the basis of chemical signatures of PCBs. Woods Inlet receives runoff primarily from three tributaries: (1) Gruggs Park Creek, (2) the small unnamed creek that drains a Texas National Guard maintenance facility, called TNG Creek for this report, and (3) Meandering Road Creek. Twenty-seven of 209 possible PCB congeners were analyzed. The sum of the congeners was used as a measure of total PCB. The spatial distribution of total PCB concentrations in the inlet indicates that most PCBs are originating in the Meandering Road Creek watershed. Peak total PCB concentrations in the three gravity cores occurred at depths corresponding to sediment deposition dates of about 1960 for two of the cores and about 1980 for the third core. The magnitudes of peak total PCB concentrations in the gravity cores followed a spatial distribution generally similar to that of surficial bottom sediment concentrations. Total PCB concentrations in suspended and streambed sediment varied greatly between sites and indicated a likely source of PCBs associated with a sampling site that receives runoff from Air Force Plant 4. Three approaches to the analyses of congener assemblages indicate that PCBs in surficial bottom sediment of Woods Inlet primarily enter Lake Worth from Meandering Road Creek and that runoff from Air Force Plant 4 is a source of the PCBs in Meandering Road Creek. Although current (2003) transport of PCBs from Air Force Plant 4 to the creek is occurring, large decreases in PCB concentrations with decreasing age in two cores indicate that PCB loading to the inlet has decreased greatly since the 1960s. Because runoff entering Meandering Road Creek from some parts of Air Force Plant 4 was not measured or sampled in this study, it cannot be said with certainty that the Air Force Plant 4 site sampled is the only source of PCBs to Meandering Road Creek.

Costs and environmental impacts of harvesting timber in Appalachia with a truck-mounted crane

Treesearch

J. N. Kochenderfer; G. W. Wendel

1980-01-01

A truck-mounted crane was used to yard and load timber from a 30-acre sale in a 140-acre watershed in the mountains of north-central West Virginia. A total logging cost, excluding road costs, of $44.35/M bm for logs delivered to a mill 20 miles away was comparable to that reported for wheeled skidders. Road costs with gravel would add $55/M bm, without gravel $26/M bm...

The Impact of Recreational Facilities on National Park Landscapes.

ERIC Educational Resources Information Center

Fitzsimmons, Allan K.

1979-01-01

Discusses a study to examine developed acreage in 14 national parks. Total park acreage is compared to service center and campground acreage and total mileage of primary and secondary roads. The most probable future for national park landscapes is maintenance of the status quo. (Author/KC)

Pattern of emergency room mortality among road traffic crash victims.

PubMed

Babalola, Oladimeji Ranti; Oluwadiya, Kehinde; Vrgoč, Goran; Akpati, Ugochukwu; Sindik, Joško; Čoklo, Miran; Marinović, Marin; Bakota, Bore

2015-11-01

Road traffic injuries are a major cause of death in the emergency room. The goal of this study was to highlight the demographic pattern of road traffic-related deaths in the accident and emergency room of a regional trauma centre. This was a 5-year retrospective study in which road traffic-related cases of emergency room mortality between June 2009 and June 2014 were reviewed. A total of 33 road traffic crash-related deaths occurred during this period with a male-to-female ratio of 2.3:1. Most of these patients were pedestrians with severe injuries involving two or more Abbreviated Injury Scale (AIS) coded regions. The mean time between injury and presentation in the first trauma facility was 112.1 (±55.4)min, and between presentation in the emergency room and death was 410 (±645)min. Mangled lower extremity, bilateral long bone lower limb fractures, pelvic injuries, blunt injuries to the chest and abdomen, and cranial fossae fractures were the common injury pattern. Median ISS and NISS in these patients were 22 (interquartile range [IQR]=11) and 25 (IQR=17), respectively. Severe injuries, delayed presentation, multiple referrals and delayed resuscitative measures contribute to road traffic crash-related mortality. Copyright © 2015 Elsevier Ltd. All rights reserved.

Can business road travel be safe? Experience of an international organization.

PubMed

Goldoni Laestadius, Jasminka; Selod, Anne Gaëlle; Ye, Jian; Dimberg, Lennart; Bliss, Anthony G

2011-01-01

Globally, more than 1.2 million people die on the roads every year, and unfortunately so do one or two operational travelers for the World Bank Group (WBG). To investigate potentially preventable factors and improve the institution's road safety policies and practices, an electronic survey was designed in 2008 targeting about 16,000 WBG staff worldwide to inquire about road crashes and near crashes over the 3-year period. Also, questions were asked pertaining to contributing circumstances. Staff was encouraged to provide comments on prevention. A combined index based on the number of reported crashes and near crashes divided by person-days spent on mission in each country was used to rank the countries. A total of 3,760 responses were collected. There were 341 road crashes reported, about 1 in 175 missions. Seventy percent took place in taxis, and 40% of crash victims reported that seatbelts were not used. Contributing factors included driver's decision error, speeding, or road/weather conditions. On the basis of a combined index, a list of 36 high-risk countries is presented. A high correlation between crashes and near crashes (r = 0.89) justifies the method. Improved corporate policies will need to be developed to address preventable risk factors identified in the study. © 2011 International Society of Travel Medicine.

Prescription medicine use by pedestrians and the risk of injurious road traffic crashes: A case-crossover study.

PubMed

Née, Mélanie; Avalos, Marta; Luxcey, Audrey; Contrand, Benjamin; Salmi, Louis-Rachid; Fourrier-Réglat, Annie; Gadegbeku, Blandine; Lagarde, Emmanuel; Orriols, Ludivine

2017-07-01

While some medicinal drugs have been found to affect driving ability, no study has investigated whether a relationship exists between these medicines and crashes involving pedestrians. The aim of this study was to explore the association between the use of medicinal drugs and the risk of being involved in a road traffic crash as a pedestrian. Data from 3 French nationwide databases were matched. We used the case-crossover design to control for time-invariant factors by using each case as its own control. To perform multivariable analysis and limit false-positive results, we implemented a bootstrap version of Lasso. To avoid the effect of unmeasured time-varying factors, we varied the length of the washout period from 30 to 119 days before the crash. The matching procedure led to the inclusion of 16,458 pedestrians involved in an injurious road traffic crash from 1 July 2005 to 31 December 2011. We found 48 medicine classes with a positive association with the risk of crash, with median odds ratios ranging from 1.12 to 2.98. Among these, benzodiazepines and benzodiazepine-related drugs, antihistamines, and anti-inflammatory and antirheumatic drugs were among the 10 medicines most consumed by the 16,458 pedestrians. Study limitations included slight overrepresentation of pedestrians injured in more severe crashes, lack of information about self-medication and the use of over-the-counter drugs, and lack of data on amount of walking. Therapeutic classes already identified as impacting the ability to drive, such as benzodiazepines and antihistamines, are also associated with an increased risk of pedestrians being involved in a road traffic crash. This study on pedestrians highlights the necessity of improving awareness of the effect of these medicines on this category of road user.

Effect of safety education on knowledge of and compliance with road safety signs among commercial motorcyclists in Uyo, Southern Nigeria.

PubMed

Johnson, O E; Adebayo, A M

2011-09-01

Compliance with road safety signs is important in the reduction of motorcycle accidents. The aim of this study was to implement health education intervention and assess its impact on the knowledge of and compliance with road safety signs among commercial motorcyclists in Uyo, Southern Nigeria. This was an intervention study among motorcyclists in Uyo, Southern Nigeria, with a control group from a similar town. The instrument of data collection was a semi-structured interviewer administered questionnaire. Subjects were selected through multistage sampling method. Baseline data on compliance to road safety signs was collected from both groups. Motorcyclists in the intervention group were given education on the importance of compliance to road safety signs. Data was subsequently collected from both groups 3 months post intervention and analysed using the Statistical Package for the Social Sciences version 11. A total of 200 respondents participated in the study, 100 from each group. Following intervention, respondents with good knowledge score increased from 21% at baseline to 82% at 3 months post intervention in the intervention group (p<0.05) and from 19% to 21% in the control group. Compliance score in the intervention group increased from 15% to 70% (p<0.05) and from 12% to 18% in the control group. A significant increase in compliance to road safety signs was recorded among motorcyclists in the intervention group after safety education. All motorcyclists should therefore be given education on road safety signs as this will improve compliance and lead to safer road use among them.

Size- and density-distributions and sources of polycyclic aromatic hydrocarbons in urban road dust.

PubMed

Murakami, Michio; Nakajima, Fumiyuki; Furumai, Hiroaki

2005-11-01

Polycyclic aromatic hydrocarbons (PAHs) present in size- and density-fractionated road dust were measured to identify the important fractions in urban runoff and to analyse their sources. Road dust was collected from a residential area (Shakujii) and a heavy traffic area (Hongo Street). The sampling of road dust from the residential area was conducted twice in different seasons (autumn and winter). The collected road dust was separated into three or four size-fractions and further fractionated into light (<1.7 g/cm3) and heavy (>1.7 g/cm3) fractions by using cesium chloride solution. Light particles constituted only 4.0+/-1.4%, 0.69+/-0.03% and 3.4+/-1.0% of the road dust by weight for Shakujii (November), Shakujii (February) and Hongo Street, respectively but contained 28+/-10%, 33+/-3% and 44+/-8% of the total PAHs, respectively. The PAH contents in the light fractions were 1-2 orders of magnitude higher than those in the heavy fractions. In the light fractions, the 12PAH contents in February were significantly higher than the 12PAH contents in November (P<0.01), whereas in the heavy fractions, no significant difference was found (P>0.05). Cluster analysis revealed that there was a significant difference in the PAH profiles between locations rather than between size-fractions, density-fractions and sampling times. Multiple regression analysis indicated that asphalt/pavement was the major source of Shakujii road dust, and that tyre and diesel vehicle exhaust were the major sources of finer and coarser fractions collected from Hongo Street road dust, respectively.

Health burden of serious road injuries in the Netherlands.

PubMed

Weijermars, W; Bos, N; Stipdonk, H

2016-11-16

The consequences of injuries in terms of disabilities and health burden are relevant for policy making. This article provides an overview of the current knowledge on this topic and discusses the health burden of serious road injuries in The Netherlands. The overview of current knowledge on disabilities following a road crash is based on a literature review. The health burden of serious road injuries is quantified in terms of years lived with disability (YLD), by combining incidence data from the Dutch hospital discharge register with information about temporary and lifelong disability. Literature shows that road traffic injuries can have a major impact on victims' physical and psychological well-being and functioning. Reported proportions of people with disability vary between 11 and 80% depending on the type of casualties, time elapsed since the crash, and the health impacts considered. Together, all casualties involving serious injuries in The Netherlands in 2009 account for about 38,000 YLD, compared to 25,000 years of life lost (YLL) of fatalities. Ninety percent of the burden of injury is due to lifelong consequences that are experienced by 20% of all those seriously injured in road accidents. Lower leg injuries and head injuries represent a high share in the total burden of injury as have cyclists that are injured in a crash without a motorized vehicle. Pedestrians and powered 2-wheeler users show the highest burden of injury per casualty. Given their major impacts and contribution to health burden, road policy making should also be aimed at reducing the number of serious road injuries and limiting the resulting health impacts.

The design of traffic signal coordinated control

NASA Astrophysics Data System (ADS)

Guo, Xueting; Sun, Hongsheng; Wang, Xifu

2017-05-01

Traffic as the tertiary industry is an important pillar industry to support the normal development of the economy. But now China's road traffic development and economic development has shown a great imbalance and fault phenomenon, which greatly inhibited the normal development of China's economy. Now in many large and medium-sized cities in China are implementing green belt construction. The so-called green band is when the road conditions to meet the conditions for the establishment of the green band, the sections of the intersection of several planning to a traffic coordination control system, so that when the driver at a specific speed can be achieved without stopping the continuous Through the intersection. Green belt can effectively reduce the delay and queuing length of vehicle driving, the normal function of urban roads and reduce the economic losses caused by traffic congestion is a great help. In this paper, the theoretical basis of the design of the coordinated control system is described. Secondly, the green time offset is calculated by the analytic method and the green band is established. And then the VISSIM software is used to simulate the traffic system before and after the improvement. Finally, the results of the two simulations are compared.

Paediatric injuries at Bugando Medical Centre in Northwestern Tanzania: a prospective review of 150 cases

PubMed Central

2013-01-01

Background Injuries continue to be the leading cause of death and disability for children. The is a paucity of published data on paediatric injuries in our local environment. This study describes the etiological spectrum, injury characteristics and treatment outcome of paediatric injuries in our local setting and provides baseline data for establishment of prevention strategies as well as treatment guidelines. Methods This was a descriptive cross-sectional study involving paediatric injury patients admitted to Bugando Medical Centre from August 2011 to April 2012. Statistical data analysis was done using SPSS version 17.0 and STATA version 12.0. Results A total of 150 patients were studied. The age of patients ranged from 1 month to 10 years with a median age of 5 years. The male to female ratio was 2.3:1. Road traffic accident was the most common cause of injury (39.3%) and motorcycle (71.2%) was responsible for the majority of road traffic accidents. Only 11 (7.3%) patients received pre-hospital care. The head /neck (32.7%) and musculoskeletal (28.0%) were the most frequent body region injured. Open wounds (51.4%), foreign bodies (31.3%) and fractures (17.3%) were the most common type of injuries sustained. The majority of patients 84 (56.0%) were treated surgically. Complication rate was 3.9%. The mean duration of hospitalization was 9.7 ± 13.1 days. Mortality rate was 12.7%. Age of the patient (< 5 years), late presentation and presence of complications were the main predictors of length of hospital stay (P < 0.001), whereas burn injuries, severe head injuries and severity of injury (Paediatric trauma score = 0–5) significantly predicted mortality (P < 0.0001). Conclusion Paediatric injuries resulting from road traffic accidents (RTAs) remain a major public health problem in this part of Tanzania. Urgent preventive measures targeting at reducing the occurrence of RTAs is necessary to reduce the incidence of paediatric injuries in this region. PMID:24499558

Low aerial imagery - an assessment of georeferencing errors and the potential for use in environmental inventory

NASA Astrophysics Data System (ADS)

Smaczyński, Maciej; Medyńska-Gulij, Beata

2017-06-01

Unmanned aerial vehicles are increasingly being used in close range photogrammetry. Real-time observation of the Earth's surface and the photogrammetric images obtained are used as material for surveying and environmental inventory. The following study was conducted on a small area (approximately 1 ha). In such cases, the classical method of topographic mapping is not accurate enough. The geodetic method of topographic surveying, on the other hand, is an overly precise measurement technique for the purpose of inventorying the natural environment components. The author of the following study has proposed using the unmanned aerial vehicle technology and tying in the obtained images to the control point network established with the aid of GNSS technology. Georeferencing the acquired images and using them to create a photogrammetric model of the studied area enabled the researcher to perform calculations, which yielded a total root mean square error below 9 cm. The performed comparison of the real lengths of the vectors connecting the control points and their lengths calculated on the basis of the photogrammetric model made it possible to fully confirm the RMSE calculated and prove the usefulness of the UAV technology in observing terrain components for the purpose of environmental inventory. Such environmental components include, among others, elements of road infrastructure, green areas, but also changes in the location of moving pedestrians and vehicles, as well as other changes in the natural environment that are not registered on classical base maps or topographic maps.

Road safety practices among commercial motorcyclists in a rural town in Nigeria: implications for health education.

PubMed

Amoran, O E; Eme, Owoaje; Giwa, O A; Gbolahan, O B

This cross-sectional, community-based study was carried out among commercial motorcyclists in Igboora. All the commercial motor parks in Igboora were visited and all the commercial motorcyclists who consented to participate in the study were interviewed. Information on the respondents' socio-demographic characteristics, and the practice of road safety measures was collected using an interviewer administered questionnaire. A total of 299 motorcyclists were interviewed. All (100%) of them were males. The mean age of the respondents was 27.4 +/- 7.4 years. One hundred eighty-two (60.7%) of the motorcyclists had the correct knowledge of the purpose of Highway Code. Only 70 (23.3%) could recognize more than half of the currently used road safety codes and 47 (15.7%) obey these road safety codes more than half of the time they see it. Only 183 (61.2%) of them had a driving license and 72 (24.1%) were able to produce these licenses on demand. All (100%) of the respondents did not use any protective helmet. Those who have longer years of working experience, higher level of education and higher knowledge of the safety codes practice it more regularly (r = 0.198, p = 0.001, chi2= 9.31, p = 0.025, and r = 0.28, p = 0.001 respectively). One hundred thirty-six (45.5%) have been involved in at least one accident in the preceding year. The overall incidence of road traffic accident was 2.16 per 1,000. There was however on statistically significant association between the practice of road safety codes and the occurrence of road traffic accidents (chi2= 0.176, p = 0.916). The study shows that the practice of road safety measures was low in this rural Nigerian community and was not associated with the incidence of road traffic accidents. Introducing road safety education particularly targeted at educating the motorcyclists on the importance and practice of road safety measures would lead to an increase in the practice of the safety measures and hopefully a reduction in the incidence of road traffic accidents.

Ecological study of road traffic injuries in the eastern Mediterranean region: country economic level, road user category and gender perspectives.

PubMed

Sengoelge, Mathilde; Laflamme, Lucie; El-Khatib, Ziad

2018-02-13

The Eastern Mediterranean region has the second highest number of road traffic injury mortality rates after the African region based on 2013 data, with road traffic injuries accounting for 27% of the total injury mortality in the region. Globally the number of road traffic deaths has plateaued despite an increase in motorization, but it is uncertain whether this applies to the Region. This study investigated the regional trends in both road traffic injury mortality and morbidity and examined country-based differences considering on income level, categories of road users, and gender distribution. Register-based ecological study linking data from Global Burden of Disease Study with the United Nations Statistics Division for population and World Bank definition for country income level. Road traffic injury mortality rates and disability-adjusted life years were compiled for all ages at country level in 1995, 2005, 2015 and combined for a regional average (n = 22) and a global average (n = 122). The data were stratified by country economic level, road user category and gender. Road traffic injury mortality rates in the Region were higher than the global average for all three reference years but suggest a downward trend. In 2015 mortality rates were more than twice as high in low and high income countries compared to global income averages and motor vehicle occupants had a 3-fold greater mortality than the global average. Severe injuries decreased by more than half for high/middle income countries but remained high for low income countries; three times higher for males than females. Despite a potential downward trend, inequalities in road traffic injury mortality and morbidity burden remain high in the Eastern Mediterranean region. Action needs to be intensified and targeted to implement and enforce safety measures that prevent and mitigate severe motor vehicle crashes in high income countries especially and invest in efforts to promote public, active transport for vulnerable road users in the resource poor countries of the Region.

The Economic Burden of Road Traffic Injuries on Households in South Asia

PubMed Central

Alam, Khurshid; Mahal, Ajay

2016-01-01

Globally, road traffic injuries accounted for about 1.36 million deaths in 2015 and are projected to become the fourth leading cause of disability-adjusted life years (DALYs) lost by 2030. One-fifth of these deaths occurred in South Asia where road traffic injuries are projected to increase by 144% by 2020. Despite this rapidly increasing disease burden there is limited evidence on the economic burden of road traffic injuries on households in South Asia. We applied a novel coarsened exact matching method to assess the household economic burden of road traffic injuries using nationally representative World Health Survey data from five South Asian countries- Bangladesh, India, Nepal, Pakistan and Sri Lanka collected during 2002–2003. We examined the impact of road traffic injuries on household out-of-pocket (OOP) health spending, household non-medical consumption expenditure and the employment status of the traffic injury-affected respondent. We exactly matched a household (after ‘coarsening’) where a respondent reported being involved in a road traffic injury to households where the respondent did not report a road traffic injury on each of multiple observed household characteristics. Our analysis found that road traffic injury-affected households had significantly higher levels of OOP health spending per member (I$0.75, p<0.01), higher OOP spending on drugs per member (I$0.30, p = 0.03), and higher OOP hospital spending per member (I$0.29, p<0.01) in the four weeks preceding the survey. Indicators of “catastrophic spending” were also significantly higher in road traffic injury-affected households: 6.45% (p<0.01) for a threshold of OOP health spending to total household spending ratio of 20%, and 7.40% (p<0.01) for a threshold of OOP health spending to household ‘capacity to pay’ ratio of 40%. However, no statistically significant effects were observed for household non-medical consumption expenditure, and employment status of the road traffic injury-affected individual. Our analysis points to the need for financial risk protection against the road traffic injury-related OOP health expenditure and a focus on prevention. PMID:27768701

Epidemiology of road traffic injury patients presenting to a tertiary hospital in Hyderabad, India.

PubMed

Howley, Isaac W; Gupta, Shivam; Tetali, Shailaja; Josyula, Lakshmi K; Wadhwaniya, Shirin; Gururaj, Gopalkrishna; Rao, Mohan; Hyder, Adnan A

2017-12-01

Road traffic injuries kill more people in India than in any other country in the world, and these numbers are rising with increasing population density and motorization. Official statistics regarding road traffic injuries are likely subject to underreporting. This study presents results of a surveillance program based at a public tertiary hospital in Hyderabad, India. All consenting patients who presented to the casualty ward after a road traffic injury over a 9-month period were enrolled. Interviews were performed and data abstracted from clinical records by trained research assistants. Data included demographics, injury characteristics, risk factors, safety behaviors, and outcomes. A total of 5,298 patients were enrolled; their mean age was 32.4 years (standard deviation 13.8) and 87.3% were men; 58.2% of patients were injured while riding a motorcycle or scooter, 22.5% were pedestrians, and 9.2% used motorized rickshaws. The most frequent collision type was skid or rollover (40.9%). Male victims were younger than female victims and were overrepresented among motorized 2-wheeler users. Patients were most frequently injured from 1600 to 2400. A total of 27.3% of patients were admitted. Hospital mortality was 5.3%, and 48.2% of deaths were among motorized 2-wheeler users. This is one of the few prospective, hospital-based studies of road traffic injury epidemiology in India. The patient population in this study was similar to prior hospital-based studies. When compared to government surveillance systems, this study showed motorized 2-wheeler users to be more frequently represented among the overall population and among fatalities. Further research should be done to develop interventions to decrease mortality associated with 2-wheeled vehicles in India. Copyright © 2017. Published by Elsevier Inc.

The epidemiology of road traffic injury hotspots in Kigali, Rwanda from police data.

PubMed

Patel, Anjni; Krebs, Elizabeth; Andrade, Luciano; Rulisa, Stephen; Vissoci, João Ricardo N; Staton, Catherine A

2016-08-02

Road traffic injuries (RTIs) are the eighth-leading cause of death worldwide, with low- and middle-income countries sharing a disproportionate number of fatalities. African countries, like Rwanda, carry a higher burden of these fatalities and with increased economic growth, these numbers are expected to rise. We aim to describe the epidemiology of RTIs in Kigali Province, Rwanda and create a hotspot map of crashes from police data. Road traffic crash (RTC) report data from January 1, 2013 to December 31, 2013 was collected from Kigali Traffic Police. In addition to analysis of descriptive data, locations of RTCs were mapped and analyzed through exploratory spatial data analysis to determine hotspots. A total of 2589 of RTCs were reported with 4689 total victims. The majority of victims were male (94.7 %) with an average age of 35.9 years. Cars were the most frequent vehicle involved (43.8 %), followed by motorcycles (14.5 %). Motorcycles had an increased risk of involvement in grievous crashes and pedestrians and cyclists were more likely to have grievous injuries. The hotspots identified were primarily located along the major roads crossing Kigali and the two busiest downtown areas. Despite significant headway by the government in RTC prevention, there continue to be high rates of RTIs in Rwanda, specifically with young males and a vulnerable road user population, such as pedestrians and motorcycle users. Improvements in police data and reporting by laypersons could prove valuable for further geographic information system analysis and efforts towards crash prevention and targeting education to motorcycle taxis could help reduce RTIs in a severely affected population.

Cities, traffic, and CO 2: A multidecadal assessment of trends, drivers, and scaling relationships

DOE PAGES

Gately, Conor K.; Hutyra, Lucy R.; Sue Wing, Ian

2015-04-06

Emissions of CO 2 from road vehicles were 1.57 billion metric tons in 2012, accounting for 28% of US fossil fuel CO 2 emissions, but the spatial distributions of these emissions are highly uncertain. We develop a new emissions inventory, the Database of Road Transportation Emissions (DARTE), which estimates CO 2 emitted by US road transport at a resolution of 1 km annually for 1980-2012. DARTE reveals that urban areas are responsible for 80% of on-road emissions growth since 1980 and for 63% of total 2012 emissions. We observe nonlinearities between CO 2 emissions and population density at broad spatial/temporalmore » scales, with total on-road CO 2 increasing nonlinearly with population density, rapidly up to 1,650 persons per square kilometer and slowly thereafter. Per capita emissions decline as density rises, but at markedly varying rates depending on existing densities. Here, we make use of DARTE's bottom-up construction to highlight the biases associated with the common practice of using population as a linear proxy for disaggregating national- or state-scale emissions. Comparing DARTE with existing downscaled inventories, we find biases of 100% or more in the spatial distribution of urban and rural emissions, largely driven by mismatches between inventory downscaling proxies and the actual spatial patterns of vehicle activity at urban scales. Here, given cities' dual importance as sources of CO 2 and an emerging nexus of climate mitigation initiatives, high-resolution estimates such as DARTE are critical both for accurately quantifying surface carbon fluxes and for verifying the effectiveness of emissions mitigation efforts at urban scales.« less

Traffic safety effects of new speed limits in Sweden.

PubMed

Vadeby, Anna; Forsman, Åsa

2018-05-01

The effects of speed, both positive and negative, make speed a primary target for policy action. Driving speeds affect the risk of being involved in a crash and the injury severity as well as the noise and exhaust emissions. Starting 2008, the Swedish Transport Administration performed a review of the speed limits on the national rural road network. This review resulted in major changes of the speed limits on the rural road network. It was predominantly roads with a low traffic safety standard and unsatisfactory road sides that were selected for reduced speed limits, as well as roads with a good traffic safety record being selected for an increase in speed limits. During 2008 and 2009, speed limit changed on approximately 20,500km of roads, out of which approximately 2700km were assigned an increase, and 17,800km were assigned a reduction in speed limits. The aim of this study is predominantly to describe and analyse the longterm traffic safety effect of increased, as well as, reduced speed limits, but also to analyse the changes in actual driving speeds due to the changed speed limits. Traffic safety effects are investigated by means of a before and after study with control group and the effects on actual mean speeds are measured by a sampling survey in which speed was measured at randomly selected sites before and after the speed limit changes. Results show a reduction in fatalities on rural roads with reduced speed limit from 90 to 80km/h where the number of fatalities decreased by 14 per year, while no significant changes were seen for the seriously injured. On motorways with an increased speed limit to 120km/h, the number of seriously injured increased by about 15 per year, but no significant changes were seen for the number of deaths. The number of seriously injured increased on all types of motorways, but the worst development was seen for narrow motorways (21.5m wide). For 2+1 roads (a continuous three-lane cross-section with alternating passing lanes and the two directions of travel separated by a median barrier) with decreased speed limit from 110 to 100km/h, the seriously injured decreased by about 16 per year. As regards the change of mean speeds, a decrease in speed limit with 10km/h led to a decrease of mean speeds of around 2-3km/h and an increase of the speed limit with 10km/h resulted in an increase of mean speed by 3km/h. In conclusion, the results show that in total about 17 lives per year have been saved on the road network with changed speed limits. For comparison, 397 road users were killed in total during 2008. The number of seriously injured remain in principle unchanged. It should also be noted that the results are obtained for the road network which changed the speed limits during 2008 and 2009, and it is not certain that the results can be generalised to another road network. Copyright © 2017 Elsevier Ltd. All rights reserved.

Laboratory study of annoyance to combined airplane and road-traffic noise

NASA Technical Reports Server (NTRS)

Powell, C. A.

1979-01-01

The annoyance of noise, which consisted of both separate and combined airplane and road-traffic noises, was studied. The subjects judged each session as to how annoyed they were in the simulated living room laboratory environment and as to how annoyed they were if they heard the noise in their home during day, evening, and night periods. The airplane noises, for equal session levels were judged significantly more annoying than the road traffic noises for the separate sessions. For the combined sessions, an interaction was found between the airplane noise and traffic noise levels, which was not adequately assessed by the total energy concept. Significant differences were found between the projected home responses for the day, evening, and night periods.

40 CFR 51.491 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... different users. RFP baseline means the total of actual volatile organic compounds or nitrogen oxides..., industrial equipment, construction vehicles, off-road motorcycles, and marine vessels). National ambient air...

Vehicle Speed and Length Estimation Using Data from Two Anisotropic Magneto-Resistive (AMR) Sensors

PubMed Central

Markevicius, Vytautas; Navikas, Dangirutis; Valinevicius, Algimantas; Zilys, Mindaugas

2017-01-01

Methods for estimating a car’s length are presented in this paper, as well as the results achieved by using a self-designed system equipped with two anisotropic magneto-resistive (AMR) sensors, which were placed on a road lane. The purpose of the research was to compare the lengths of mid-size cars, i.e., family cars (hatchbacks), saloons (sedans), station wagons and SUVs. Four methods were used in the research: a simple threshold based method, a threshold method based on moving average and standard deviation, a two-extreme-peak detection method and a method based on the amplitude and time normalization using linear extrapolation (or interpolation). The results were achieved by analyzing changes in the magnitude and in the absolute z-component of the magnetic field as well. The tests, which were performed in four different Earth directions, show differences in the values of estimated lengths. The magnitude-based results in the case when cars drove from the South to the North direction were even up to 1.2 m higher than the other results achieved using the threshold methods. Smaller differences in lengths were observed when the distances were measured between two extreme peaks in the car magnetic signatures. The results were summarized in tables and the errors of estimated lengths were presented. The maximal errors, related to real lengths, were up to 22%. PMID:28771171

Effects of weather conditions, light conditions, and road lighting on vehicle speed.

PubMed

Jägerbrand, Annika K; Sjöbergh, Jonas

2016-01-01

Light conditions are known to affect the number of vehicle accidents and fatalities but the relationship between light conditions and vehicle speed is not fully understood. This study examined whether vehicle speed on roads is higher in daylight and under road lighting than in darkness, and determined the combined effects of light conditions, posted speed limit and weather conditions on driving speed. The vehicle speed of passenger cars in different light conditions (daylight, twilight, darkness, artificial light) and different weather conditions (clear weather, rain, snow) was determined using traffic and weather data collected on an hourly basis for approximately 2 years (1 September 2012-31 May 2014) at 25 locations in Sweden (17 with road lighting and eight without). In total, the data included almost 60 million vehicle passes. The data were cleaned by removing June, July, and August, which have different traffic patterns than the rest of the year. Only data from the periods 10:00 A.M.-04:00 P.M. and 06:00 P.M.-10:00 P.M. were used, to remove traffic during rush hour and at night. Multivariate adaptive regression splines was used to evaluate the overall influence of independent variables on vehicle speed and nonparametric statistical testing was applied to test for speed differences between dark-daylight, dark-twilight, and twilight-daylight, on roads with and without road lighting. The results show that vehicle speed in general depends on several independent variables. Analyses of vehicle speed and speed differences between daylight, twilight and darkness, with and without road lighting, did not reveal any differences attributable to light conditions. However, vehicle speed decreased due to rain or snow and the decrease was higher on roads without road lighting than on roads with lighting. These results suggest that the strong association between traffic accidents and darkness or low light conditions could be explained by drivers failing to adjust their speed to the reduced visibility in dark conditions.

PM10 and PM2.5 chemical source profiles with optical attenuation and health risk indicators of paved and unpaved road dust in Bhopal, India.

PubMed

Samiksha, Shilpi; Sunder Raman, Ramya; Nirmalkar, Jayant; Kumar, Samresh; Sirvaiya, Rohit

2017-03-01

Size classified (PM 10 and PM 2.5 ) paved and unpaved road dust chemical source profiles, optical attenuation and potential health risk from exposure to these sources are reported in this study. A total of 45 samples from 9 paved road and 6 unpaved road sites located in and around Bhopal were re-suspended in the laboratory, collected onto filter substrates and subjected to a variety of chemical analyses. In general, road dust was enriched (compared to upper continental crustal abundance) in anthropogenic pollutants including Sb, Cu, Zn, Co, and Pb. Organic and elemental carbon (OC/EC) in PM 10 and PM 2.5 size fractions were 50-75% higher in paved road dust compared to their counterparts in unpaved road dust. Further, the results suggest that when it is not possible to include carbon fractions in source profiles, the inclusion of optical attenuation is likely to enhance the source resolution of receptor models. Additionally, profiles obtained in this study were not very similar to the US EPA SPECIATE composite profiles for PM 10 and PM 2.5 , for both sources. Specifically, the mass fractions of Si, Fe, OC, and EC were most different between SPECIATE composite profiles and Bhopal composite profiles. An estimate of health indicators for Bhopal road dust revealed that although Cr was only marginally enriched, its inhalation may pose a health risk. The estimates of potential lifetime incremental cancer risk induced by the inhalation of Cr in paved and unpaved road dust (PM 10 and PM 2.5 ) for both adults and children were higher than the baseline values of acceptable risk. These results suggest that road dust Cr induced carcinogenic risk should be further investigated. Copyright © 2016 Elsevier Ltd. All rights reserved.

Re-entrained road dust PM10 emission from selected streets of Krakow and its impact on air quality

NASA Astrophysics Data System (ADS)

Bogacki, Marek; Mazur, Marian; Oleniacz, Robert; Rzeszutek, Mateusz; Szulecka, Adriana

2018-01-01

Scientific research studies conducted in various parts of the world confirm that PM10 concentrations in urban air depend to a great extent on the resuspension processes of the dust deposited on the road surface. The paper presents the results of the study related to the determination of the re-entrained PM10 emissions from four selected streets of Krakow (Southern Poland) together with the assessment of its impact on air quality. Examined streets are characterised by different traffic intensity (from 500 to over 20 000 vehicles per day) and individual vehicle structure. Dust material sampling and estimation of the PM10 emission were conducted according to the U.S. EPA methodology (AP 42 Fifth Edition). Two variants of sample collection were applied: from the road surface including the area at the curb (4 streets) and from the road surface alone (1 street). The estimates of resuspended road dust emission as well as the reference values derived from the U.S. EPA guidelines were used to assess the impact of this emission on the PM10 levels in the air at the location of one of the analysed streets. This assessment was conducted using the CALINE4 mathematical model. The study showed that the PM10 emissions from the re-entrained road dust can be responsible for up to 25 % in the winter and 50 % in the summer of the total PM10 concentrations in the air near the roads.

Method for selection of optimal road safety composite index with examples from DEA and TOPSIS method.

PubMed

Rosić, Miroslav; Pešić, Dalibor; Kukić, Dragoslav; Antić, Boris; Božović, Milan

2017-01-01

Concept of composite road safety index is a popular and relatively new concept among road safety experts around the world. As there is a constant need for comparison among different units (countries, municipalities, roads, etc.) there is need to choose an adequate method which will make comparison fair to all compared units. Usually comparisons using one specific indicator (parameter which describes safety or unsafety) can end up with totally different ranking of compared units which is quite complicated for decision maker to determine "real best performers". Need for composite road safety index is becoming dominant since road safety presents a complex system where more and more indicators are constantly being developed to describe it. Among wide variety of models and developed composite indexes, a decision maker can come to even bigger dilemma than choosing one adequate risk measure. As DEA and TOPSIS are well-known mathematical models and have recently been increasingly used for risk evaluation in road safety, we used efficiencies (composite indexes) obtained by different models, based on DEA and TOPSIS, to present PROMETHEE-RS model for selection of optimal method for composite index. Method for selection of optimal composite index is based on three parameters (average correlation, average rank variation and average cluster variation) inserted into a PROMETHEE MCDM method in order to choose the optimal one. The model is tested by comparing 27 police departments in Serbia. Copyright © 2016 Elsevier Ltd. All rights reserved.

An epidemiological study of road traffic accident cases admitted in a tertiary care hospital.

PubMed

Pathak, S M; Jindal, A K; Verma, A K; Mahen, A

2014-01-01

Road traffic accidents are a leading cause of mortality and morbidity globally. In India, more than a million are injured annually and about a lakh are killed in road traffic accidents.(1) It causes the country to lose around 55,000 crores annually which is 2-3% of Gross Domestic Production (GDP).(2) This cross sectional study was conducted to elucidate the role of various factors involved in road traffic accidents. Road traffic accident cases admitted to a tertiary care hospital between 01 Oct 2009 and 28 Feb 2011 were included in the study. A total of 182 patients were studied. Information was collected through questionnaire, hospital records and on-site visit. OPD cases, comatose patients and deaths were excluded. Two-wheelers were the commonest vehicle involved in vehicular accidents. Most accidents happened at a speed of 40-60 km/h (37.9%). Most of the patients were aged between 20 and 30 years. Majority had a driving experience of less than 5 years. Monsoons witnessed 46.7% cases. Most cases occurred between 6 and 10 pm. Among severe injuries, the commonest was lower limb fractures (19.8%). There are multiple factors associated with road traffic accidents which due to the lack of road safety measures in the country are playing their role. It is the need of the hour to address this issue and formulate comprehensive, scientific and practical rules and regulations as well as evaluate its enforcement.

Extent, consequences and economic burden of road traffic crashes in Iran.

PubMed

Rezaei, Satar; Arab, Mohammad; Karami Matin, Behzad; Akbari Sari, Ali

2014-07-01

Road Traffic Injuries (RTIs) as a result of road traffic crashes (RTCs) rank as the leading cause of death, disability and property loss worldwide, especially in low and middle-income countries. This study aims to analyze the costs of RTCs in Iran. A standard human capital approach was used to estimate the costs. Costs included medical, administrative and funeral costs, property damage, production lost and intangible costs. Data about the number of deaths and injuries resulting from RTIs between 20 March 2009 and 20 March 2010 was obtained from two national databases designed at the Center for Disaster Management and Medical Emergencies (CDMME) and the Legal Medicine Organization (LMO), respectively. The severity and medical costs of injuries were identified by reviewing 400 medical records that were selected randomly from patients who were admitted to two large trauma centers in Shariati and Sina hospitals in Tehran province. Moreover, information about production lost, property damage, rehabilitation cost, intangible costs and administration costs were collected by review of current evidence and consulting with expert opinion. In total 806,922 RTIs and 22,974 deaths resulted from the RTCs in the study period. The total cost of RTCs was about 72,465 billion Rials (7.2 billion US Dollars), which amounts to 2.19% of Iran's Gross Domestic Production (GDP). Direct costs were 3,516 billion Rials (around 48.6 % of the total costs), following by 24,785 billion Rials (around 34.2 % of the total costs) for production lost and 12,513 billion Rials (around 17.2 % of the total costs) for intangible costs. This study indicated that the burden of both RTCs and RTIs in Iran is substantial. Moreover, RTCs have significant economic consequences and are a large drain on healthcare resources. @ 2014 KUMS, All rights reserved.

Extent, consequences and economic burden of road traffic crashes in Iran

PubMed Central

Rezaei, Satar; Arab, Mohammad; Karami Matin, Behzad; Akbari Sari, Ali

2014-01-01

Abstract: Background: Road Traffic Injuries (RTIs) as a result of road traffic crashes (RTCs) rank as the leading cause of death, disability and property loss worldwide, especially in low and middle-income countries. This study aims to analyze the costs of RTCs in Iran. Methods: A standard human capital approach was used to estimate the costs. Costs included medical, administrative and funeral costs, property damage, production lost and intangible costs. Data about the number of deaths and injuries resulting from RTIs between 20 March 2009 and 20 March 2010 was obtained from two national databases designed at the Center for Disaster Management and Medical Emergencies (CDMME) and the Legal Medicine Organization (LMO), respectively. The severity and medical costs of injuries were identified by reviewing 400 medical records that were selected randomly from patients who were admitted to two large trauma centers in Shariati and Sina hospitals in Tehran province. Moreover, information about production lost, property damage, rehabilitation cost, intangible costs and administration costs were collected by review of current evidence and consulting with expert opinion. Results: In total 806,922 RTIs and 22,974 deaths resulted from the RTCs in the study period. The total cost of RTCs was about 72,465 billion Rials (7.2 billion US Dollars), which amounts to 2.19% of Iran’s Gross Domestic Production (GDP). Direct costs were 3,516 billion Rials (around 48.6 % of the total costs), following by 24,785 billion Rials (around 34.2 % of the total costs) for production lost and 12,513 billion Rials (around 17.2 % of the total costs) for intangible costs. Conclusions: This study indicated that the burden of both RTCs and RTIs in Iran is substantial. Moreover, RTCs have significant economic consequences and are a large drain on healthcare resources. PMID:24045158

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hermeston, Mark W.

Franklin County noxious weed management along BPA rights-of-ways, transmission structures, roads, and switches listed in Attachment 1. Attachment 1 identifies the ROW, ROW width, and ROW length of the proposed action. Includes all BPA 115kV, 230kV, and 500 kV ROWs in Franklin County, Washington. BPA proposes to clear noxious and/or unwanted low-growing vegetation in all BPA ROWs in Franklin County, Washington. In a cooperative effort, BPA, through landowners and the Franklin County Weed Control Board, plan to eradicate noxious plants and other unwanted, low-growing vegetation within the ROW width including all structures and access roads. BPA’s overall goal is tomore » eradicate all noxious and unwanted vegetation through chemical treatment and reseeding. Selective and nonselective chemical treatment using spot, local and broadcast methods. All work will be executed in accordance with the National Electrical Safety Code and BPA standards. Work is to begin in March 2002.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hermeston, Mark W.

Benton County noxious weed management along BPA rights-of-ways, transmission structures, roads, and switches listed in Attachment 1. Attachment 1 identifies the ROW, ROW width, and ROW length of the proposed action. Includes all BPA 115kV, 230kV, 345kV and 500 kV ROWs in Benton County, Washington. BPA proposes to clear noxious and/or unwanted low-growing vegetation in all BPA ROWs in Benton County, Washington. In a cooperative effort, BPA, through landowners and the Benton County Weed Control Board, plan to eradicate noxious plants and other unwanted, low-growing vegetation within the ROW width including all structures and access roads. BPA’s overall goal ismore » to eradicate all noxious and unwanted vegetation through chemical treatment and reseeding. Selective and nonselective chemical treatment using spot, local and broadcast methods. All work will be executed in accordance with the National Electrical Safety Code and BPA standards. Work is to begin in March 2002.« less

Safety performance functions incorporating design consistency variables.

PubMed

Montella, Alfonso; Imbriani, Lella Liana

2015-01-01

Highway design which ensures that successive elements are coordinated in such a way as to produce harmonious and homogeneous driver performances along the road is considered consistent and safe. On the other hand, an alignment which requires drivers to handle high speed gradients and does not meet drivers' expectancy is considered inconsistent and produces higher crash frequency. To increase the usefulness and the reliability of existing safety performance functions and contribute to solve inconsistencies of existing highways as well as inconsistencies arising in the design phase, we developed safety performance functions for rural motorways that incorporate design consistency measures. Since the design consistency variables were used only for curves, two different sets of models were fitted for tangents and curves. Models for the following crash characteristics were fitted: total, single-vehicle run-off-the-road, other single vehicle, multi vehicle, daytime, nighttime, non-rainy weather, rainy weather, dry pavement, wet pavement, property damage only, slight injury, and severe injury (including fatal). The design consistency parameters in this study are based on operating speed models developed through an instrumented vehicle equipped with a GPS continuous speed tracking from a field experiment conducted on the same motorway where the safety performance functions were fitted (motorway A16 in Italy). Study results show that geometric design consistency has a significant effect on safety of rural motorways. Previous studies on the relationship between geometric design consistency and crash frequency focused on two-lane rural highways since these highways have the higher crash rates and are generally characterized by considerable inconsistencies. Our study clearly highlights that the achievement of proper geometric design consistency is a key design element also on motorways because of the safety consequences of design inconsistencies. The design consistency measures which are significant explanatory variables of the safety performance functions developed in this study are: (1) consistency in driving dynamics, i.e., difference between side friction assumed with respect to the design speed and side friction demanded at the 85th percentile speed; (2) operating speed consistency, i.e., absolute value of the 85th percentile speed reduction through successive elements of the road; (3) inertial speed consistency, i.e., difference between the operating speed in the curve and the average operating speed along the 5 km preceding the beginning of the curve; and (4) length of tangent preceding the curve (only for run-off-the-road crashes). Copyright © 2014 Elsevier Ltd. All rights reserved.

Total Particle Number Emissions from Modern Diesel, Natural Gas, and Hybrid Heavy-Duty Vehicles During On-Road Operation.

PubMed

Wang, Tianyang; Quiros, David C; Thiruvengadam, Arvind; Pradhan, Saroj; Hu, Shaohua; Huai, Tao; Lee, Eon S; Zhu, Yifang

2017-06-20

Particle emissions from heavy-duty vehicles (HDVs) have significant environmental and public health impacts. This study measured total particle number emission factors (PNEFs) from six newly certified HDVs powered by diesel and compressed natural gas totaling over 6800 miles of on-road operation in California. Distance-, fuel- and work-based PNEFs were calculated for each vehicle. Distance-based PNEFs of vehicles equipped with original equipment manufacturer (OEM) diesel particulate filters (DPFs) in this study have decreased by 355-3200 times compared to a previous retrofit DPF dynamometer study. Fuel-based PNEFs were consistent with previous studies measuring plume exhaust in the ambient air. Meanwhile, on-road PNEF shows route and technology dependence. For vehicles with OEM DPFs and Selective Catalytic Reduction Systems, PNEFs under highway driving (i.e., 3.34 × 10 12 to 2.29 × 10 13 particles/mile) were larger than those measured on urban and drayage routes (i.e., 5.06 × 10 11 to 1.31 × 10 13 particles/mile). This is likely because a significant amount of nucleation mode volatile particles were formed when the DPF outlet temperature reached a critical value, usually over 310 °C, which was commonly achieved when vehicle speed sustained over 45 mph. A model year 2013 diesel HDV produced approximately 10 times higher PNEFs during DPF active regeneration events than nonactive regeneration.

Influences of motorcycle rider and driver characteristics and road environment on red light running behavior at signalized intersections.

PubMed

Jensupakarn, Auearree; Kanitpong, Kunnawee

2018-04-01

In Thailand, red light running is considered as one of the most dangerous behaviors at intersection. Red light running (RLR) behavior is the failure to obey the traffic control signal. However, motorcycle riders and car drivers who are running through red lights could be influenced by human factors or road environment at intersection. RLR could be advertent or inadvertent behavior influenced by many factors. Little research study has been done to evaluate the contributing factors influencing the red-light violation behavior. This study aims to determine the factors influencing the red light running behavior including human characteristics, physical condition of intersection, traffic signal operation, and traffic condition. A total of 92 intersections were observed in Chiang Mai, Nakhon Ratchasima, and Chonburi, the major provinces in each region of Thailand. In addition, the socio-economic characteristics of red light runners were obtained from self-reported questionnaire survey. The Binary Logistic Regression and the Multiple Linear Regression models were used to determine the characteristics of red light runners and the factors influencing rates of red light running respectively. The results from this study can help to understand the characteristics of red light runners and factors affecting them to run red lights. For motorcycle riders and car drivers, age, gender, occupation, driving license, helmet/seatbelt use, and the probability to be penalized when running the red light significantly affect RLR behavior. In addition, the results indicated that vehicle travelling direction, time of day, existence of turning lane, number of lanes, lane width, intersection sight distance, type of traffic signal pole, type of traffic signal operation, length of yellow time interval, approaching speed, distance from intersection warning sign to stop line, and pavement roughness significantly affect RLR rates. Copyright © 2018 Elsevier Ltd. All rights reserved.

A new bus lane on urban expressway with no-bay bus stop

NASA Astrophysics Data System (ADS)

Tian, Zhao; Jia, Limin

2016-01-01

The sharp increase in residents and vehicles causes heavy traffic pressure in many cities. To ease traffic congestion, it has been the common sense that we should develop public transit system. The priority of the bus appears particularly necessary with the rapid development of the public transport system. The bus lane is an important embodiment of the bus priority. Focusing on the problem of the unreasonable dedicated bus lane (DBL) under the lower ratio of buses, this paper proposed a new bus lane with limited physical length. And this bus lane can reduce the lane-changing conflict caused by the buses and cars running on roads without bus lanes. Based on the cellular automata (CA) traffic flow model and the lane-changing behavior of the vehicle including the optional lane-changing and the mandatory lane-changing, a three-lane traffic model with an isolated no-bay bus stop is proposed. The ordinary three-lane traffic without a bus lane and the cases of traffic with a DBL or the proposed bus lane are simulated, and the comparisons in the form of the fundamental diagrams are made among them. It is shown that the no-bay bus stop can act as a bottleneck on the traffic flow because of the mandatory lane-changing behavior. Under a certain ratio of the bus number to the total vehicles number, (1) the traffic with the proposed bus lane has less lane-changing conflict and can provide higher traffic capacity than the ordinary traffic without a bus lane, (2) compared with the DBL, the proposed bus lane is advantageous in easing congestion on the ordinary lanes when the traffic flow is high and can avoid unreasonable allocation of the road resources.

[Road traffic injuries in Catalonia (Spain): an approach using the minimum data set for acute-care hospitals and emergency resources].

PubMed

Clèries, Montse; Bosch, Anna; Vela, Emili; Bustins, Montse

2015-09-01

To verify the usefulness of the minimum data set (MDS) for acute-care hospitals and emergency resources for the study of road traffic injuries and to describe the use of health resources in Catalonia (Spain). The study population consisted of patients treated in any kind of emergency service and patients admitted for acute hospitalization in Catalonia in 2013. A descriptive analysis was performed by age, gender, time and clinical variables. A total of 48,150 patients were treated in hospital emergency departments, 6,210 were attended in primary care, and 4,912 were admitted to hospital. There was a higher proportion of men (56.2%), mainly aged between 20 and 40 years. Men accounted for 54.9% of patients with minor injuries and 75.1% of those with severe injuries. Contusions are the most common injury (30.2%), followed by sprains (28.7%). Fractures mostly affected persons older than 64 years, internal injuries particularly affected men older than 64 years, and wounds mainly affected persons younger than 18 years and older than 64 years. In the adult population, the severity of the injuries increased with age, leading to longer length of stay and greater complexity. Hospital mortality was 0.2%. Fractures, internal injuries and wounds were more frequent in the group of very serious injuries, and sprains and contusions in the group of minor injuries. MDS records (acute hospitals and emergency resources) provide information that is complementary to other sources of information on traffic accidents, increasing the completeness of the data. Copyright © 2014 SESPAS. Published by Elsevier Espana. All rights reserved.

Flexible Engineering Structures from the Corrugated Metal Sheets - Comparison of Costs of Solutions used in the Road Building

NASA Astrophysics Data System (ADS)

Ołdakowska, E.

2017-11-01

The flexible structures from the corrugated metal sheets are used in particular in the road building, especially as passages for animals. Easy and quick assembly, as well as lower realization costs when compared to the traditional solutions increase interest in such structures. Availability and variety of systems allows for searching for solutions which are the best and optimal in the economical range. The article presents the comparison of costs of the basic materials used in various systems of flexible structures from the corrugated metal sheets. In order to determine the costs of the material solutions the data for two systems used in Poland (for construction of the upper passages for animals) since 2008 have been used. The cost estimation for the basic materials required for realization of 1 m2 of the flexible structure from the corrugated steel sheets have been prepared with use of prices obtained directly from the Polish contractors and manufacturers, as well as process included in the quarterly information (Sekocenbud). The difference of prices of materials available on the market allows the investor for selecting the structure depending on the needs and financial possibilities, as well as for achieving some savings. The savings in case of purchasing sheets of identical parameters (thickness, profile characteristics) are from approx. 4% to 8% per 1 m2 of sheet. The connectors in form of bolts M20 cl. 8.8 of various lengths are an expense from 3.00 PLN to 3.50 PLN. Those values may seem low, but taking into consideration amounts connected with construction of many square meters of structure they may become very important factor in the total investment costs.

The effects of meaningful irrelevant speech and road traffic noise on teachers' attention, episodic and semantic memory.

PubMed

Enmarker, Ingela

2004-11-01

The aim of the present experiment was to examine the effects of meaningful irrelevant speech and road traffic noise on attention, episodic and semantic memory, and also to examine whether the noise effects were age-dependent. A total of 96 male and female teachers in the age range of 35-45 and 55-65 years were randomly assigned to a silent or the two noise conditions. Noise effects found in episodic memory were limited to a meaningful text, where cued recall contrary to expectations was equally impaired by the two types of noise. However, meaningful irrelevant speech also deteriorated recognition of the text, whereas road traffic noise caused no decrement. Retrieval from two word fluency tests in semantic memory showed strong effects of noise exposure, one affected by meaningful irrelevant speech and the other by road traffic noise. The results implied that both acoustic variation and the semantic interference could be of importance for noise impairments. The expected age-dependent noise effects did not show up.

Prediction of road traffic death rate using neural networks optimised by genetic algorithm.

PubMed

Jafari, Seyed Ali; Jahandideh, Sepideh; Jahandideh, Mina; Asadabadi, Ebrahim Barzegari

2015-01-01

Road traffic injuries (RTIs) are realised as a main cause of public health problems at global, regional and national levels. Therefore, prediction of road traffic death rate will be helpful in its management. Based on this fact, we used an artificial neural network model optimised through Genetic algorithm to predict mortality. In this study, a five-fold cross-validation procedure on a data set containing total of 178 countries was used to verify the performance of models. The best-fit model was selected according to the root mean square errors (RMSE). Genetic algorithm, as a powerful model which has not been introduced in prediction of mortality to this extent in previous studies, showed high performance. The lowest RMSE obtained was 0.0808. Such satisfactory results could be attributed to the use of Genetic algorithm as a powerful optimiser which selects the best input feature set to be fed into the neural networks. Seven factors have been known as the most effective factors on the road traffic mortality rate by high accuracy. The gained results displayed that our model is very promising and may play a useful role in developing a better method for assessing the influence of road traffic mortality risk factors.

Reconnaissance assessment of erosion and sedimentation in the Canada de los Alamos basin, Los Angeles and Ventura Counties, California

USGS Publications Warehouse

Knott, J.M.

1980-01-01

An assessment of present erosion and sedimentation conditions in the Ca?ada de los Alamos basin was made to aid in estimating the impact of off-road-vehicle use on the sediment yield of the basin. Impacts of off-road vehicles were evaluated by reconnaissance techniques and by comparing the study area with other offroad-vehicle sites in California. Major-storm sediment yields for the basin were estimated using empirical equations developed for the Transverse Ranges and measurements of gully erosion in a representative off-road-vehicle basin. Normal major-storm yields of 73,200 cubic yards would have to be increased to about 98,000 cubic yards to account for the existing level of accelerated erosion caused by off-road vehicles. Long-term sediment yield of the Ca?ada de los Alamos basin upstream from its confluence with Gorman Creek, under present conditions of off-road-vehicle use, is approximately 420 cubic yards per square mile per year--a rate that is considerably lower than a previous estimate of 1,270 cubic yards per square mile per year for the total catchment area above Pyramid Lake.

Injury pattern among non-fatal road traffic accident cases: a cross-sectional study in Central India.

PubMed

Ganveer, Gunjan B; Tiwari, Rajnarayan R

2005-01-01

What is the pattern of injuries among non-fatal cases of road traffic accidents? To study the pattern of injuries among non-fatal cases of road traffic accidents. Cross-sectional study. Nagpur, a city in central India. 423 non-fatal cases of road traffic accidents reporting for treatment to Indira Gandhi Medical College, Nagpur during 1999-2000. Demographic characteristics, accident characteristics. Percentages, proportions, Chi-square test. Out of total 423 subjects, 363 (85.8%) were male while only 60 (14.2%) were female subjects. Majority of the victims (75%) were in the age group 18- 37 years. Sideways collision was the most common type of accident seen in 269 (63.59%) cases. Two wheelers and LMV were the common vehicle being involved in accidents (69.97%) and these accidents were almost equally distributed in both half of the day. Fracture of the bones was the common injury afflicted to the victims followed by multiple injuries like blunt injury, abrasions and lacerations. Lower extremity was involved in 192 (45.39%) cases while multiple sites were affected in 114 (26.95%) cases. In the present study, the fractures were the commonest injury among the victims of non-fatal road traffic accidents.

Automatic detection of zebra crossings from mobile LiDAR data

NASA Astrophysics Data System (ADS)

Riveiro, B.; González-Jorge, H.; Martínez-Sánchez, J.; Díaz-Vilariño, L.; Arias, P.

2015-07-01

An algorithm for the automatic detection of zebra crossings from mobile LiDAR data is developed and tested to be applied for road management purposes. The algorithm consists of several subsequent processes starting with road segmentation by performing a curvature analysis for each laser cycle. Then, intensity images are created from the point cloud using rasterization techniques, in order to detect zebra crossing using the Standard Hough Transform and logical constrains. To optimize the results, image processing algorithms are applied to the intensity images from the point cloud. These algorithms include binarization to separate the painting area from the rest of the pavement, median filtering to avoid noisy points, and mathematical morphology to fill the gaps between the pixels in the border of white marks. Once the road marking is detected, its position is calculated. This information is valuable for inventorying purposes of road managers that use Geographic Information Systems. The performance of the algorithm has been evaluated over several mobile LiDAR strips accounting for a total of 30 zebra crossings. That test showed a completeness of 83%. Non-detected marks mainly come from painting deterioration of the zebra crossing or by occlusions in the point cloud produced by other vehicles on the road.

Adsorption of heavy metals by road deposited solids.

PubMed

Gunawardana, Chandima; Goonetilleke, Ashantha; Egodawatta, Prasanna

2013-01-01

The research study discussed in the paper investigated the adsorption/desorption behaviour of heavy metals commonly deposited on urban road surfaces, namely, Zn, Cu, Cr and Pb, for different particle size ranges of solids. The study outcomes, based on field studies and batch experiments, confirmed that road deposited solids particles contain a significantly high amount of vacant charge sites with the potential to adsorb additional heavy metals. Kinetic studies and adsorption experiments indicated that Cr is the most preferred metal element to associate with solids due to the relatively high electronegativity and high charge density of trivalent cation (Cr(3+)). However, the relatively low availability of Cr in the urban road environment could influence this behaviour. Comparing total adsorbed metals present in solids particles, it was found that Zn has the highest capacity for adsorption to solids. Desorption experiments confirmed that a low concentration of Cu, Cr and Pb in solids was present in water-soluble and exchangeable form, whilst a significant fraction of adsorbed Zn has a high likelihood of being released back into solution. Among heavy metals, Zn is considered to be the most commonly available metal among road surface pollutants.

The Association between Regional Environmental Factors and Road Trauma Rates: A Geospatial Analysis of 10 Years of Road Traffic Crashes in British Columbia, Canada

PubMed Central

Brubacher, Jeffrey R.; Chan, Herbert; Erdelyi, Shannon; Schuurman, Nadine; Amram, Ofer

2016-01-01

Background British Columbia, Canada is a geographically large jurisdiction with varied environmental and socio-cultural contexts. This cross-sectional study examined variation in motor vehicle crash rates across 100 police patrols to investigate the association of crashes with key explanatory factors. Methods Eleven crash outcomes (total crashes, injury crashes, fatal crashes, speed related fatal crashes, total fatalities, single-vehicle night-time crashes, rear-end collisions, and collisions involving heavy vehicles, pedestrians, cyclists, or motorcyclists) were identified from police collision reports and insurance claims and mapped to police patrols. Six potential explanatory factors (intensity of traffic law enforcement, speed limits, climate, remoteness, socio-economic factors, and alcohol consumption) were also mapped to police patrols. We then studied the association between crashes and explanatory factors using negative binomial models with crash count per patrol as the response variable and explanatory factors as covariates. Results Between 2003 and 2012 there were 1,434,239 insurance claim collisions, 386,326 police reported crashes, and 3,404 fatal crashes. Across police patrols, there was marked variation in per capita crash rate and in potential explanatory factors. Several factors were associated with crash rates. Percent roads with speed limits ≤ 60 km/hr was positively associated with total crashes, injury crashes, rear end collisions, and collisions involving pedestrians, cyclists, and heavy vehicles; and negatively associated with single vehicle night-time crashes, fatal crashes, fatal speeding crashes, and total fatalities. Higher winter temperature was associated with lower rates of overall collisions, single vehicle night-time collisions, collisions involving heavy vehicles, and total fatalities. Lower socio-economic status was associated with higher rates of injury collisions, pedestrian collisions, fatal speeding collisions, and fatal collisions. Regions with dedicated traffic officers had fewer fatal crashes and fewer fatal speed related crashes but more rear end crashes and more crashes involving cyclists or pedestrians. The number of traffic citations per 1000 drivers was positively associated with total crashes, fatal crashes, total fatalities, fatal speeding crashes, injury crashes, single vehicle night-time crashes, and heavy vehicle crashes. Possible explanations for these associations are discussed. Conclusions There is wide variation in per capita rates of motor vehicle crashes across BC police patrols. Some variation is explained by factors such as climate, road type, remoteness, socioeconomic variables, and enforcement intensity. The ability of explanatory factors to predict crash rates would be improved if considered with local traffic volume by all travel modes. PMID:27099930

Building development and roads: implications for the distribution of stone curlews across the Brecks.

PubMed

Clarke, Ralph T; Liley, Durwyn; Sharp, Joanna M; Green, Rhys E

2013-01-01

Substantial new housing and infrastructure development planned within England has the potential to conflict with the nature conservation interests of protected sites. The Breckland area of eastern England (the Brecks) is designated as a Special Protection Area for a number of bird species, including the stone curlew (for which it holds more than 60% of the UK total population). We explore the effect of buildings and roads on the spatial distribution of stone curlew nests across the Brecks in order to inform strategic development plans to avoid adverse effects on such European protected sites. Using data across all years (and subsets of years) over the period 1988-2006 but restricted to habitat areas of arable land with suitable soils, we assessed nest density in relation to the distances to nearest settlements and to major roads. Measures of the local density of nearby buildings, roads and traffic levels were assessed using normal kernel distance-weighting functions. Quasi-Poisson generalised linear mixed models allowing for spatial auto-correlation were fitted. Significantly lower densities of stone curlew nests were found at distances up to 1500m from settlements, and distances up to 1000m or more from major (trunk) roads. The best fitting models involved optimally distance-weighted variables for the extent of nearby buildings and the trunk road traffic levels. The results and predictions from this study of past data suggests there is cause for concern that future housing development and associated road infrastructure within the Breckland area could have negative impacts on the nesting stone curlew population. Given the strict legal protection afforded to the SPA the planning and conservation bodies have subsequently agreed precautionary restrictions on building development within the distances identified and used the modelling predictions to agree mitigation measures for proposed trunk road developments.

Extended Abstracts. The Electrochemical Society Fall Meeting (174th) Held in Chicago, Illinois on 9-14 October 1988. Volume 88-2

DTIC Science & Technology

1988-10-14

Ion Ream Lithography Using Novolak Based Resist S. Matsui, Y. Kojima, and .7. Dchiai ......................................... 0, 448 FIB Direct Ion...to the line length, reflection effects occur. The impedance oscillates with small changes in frequency as constructive or destructive interference ...Materials and Chemical Sciences Division discharge rates by a factor of five. Na/ DMDS cell 1 Cyclotron Road, Berkeley, CA 94720 having I wt% CoPc were

The Russian Military and the Georgia War: Lessons and Implications

DTIC Science & Technology

2011-06-01

establish- ing direct government-to-government contact with the unofficial governments in Abkhazia and South Os- setia , a step that Georgia claimed amounted...the peacekeeping forces in Abkhazia and South Os- setia , arguing that Russia had become a party to the conflict and therefore was unsuited to its...length of the highway from the army’s garrison in Vladikavkaz to the Roki Tun- nel, the only road avenue of approach into South Os- setia .17 While

Naval Arctic Research Laboratory (NARL) Subsurface Containment Berm Investigation

DTIC Science & Technology

2015-10-01

Southwest UTM Universal Transverse Mercator XPS Extruded Polystyrene WGS World Geodetic System ERDC/CRREL TR-15-15 1 1 Introduction In 1996, under...layers of extruded polystyrene (XPS) board insula- tion at approximately 1.0 m below the ground surface for the length of the berm. The XPS was...ply- wood installed during the trench construction. We attempted probing in Dew Line Road and in the area adjacent to the Navy Hangar and Treat- ment

International Comparison of Water Resources Utilization Efficiency in the Silk Road Economic Belt

NASA Astrophysics Data System (ADS)

Yan, Long; Ma, Jing; Deng, Wei; Wang, Yong

2018-03-01

In order to get knowledge of the standard of water utilization of the Silk Road Economic Belt from international point of view, the paper analyzes the annual variation of water resources utilization in the Silk Road Economic Belt, and compares with other typical countries. The study shows that Water resources utilization efficiency has been greatly improved in recent 20 years and the water consumption per USD 10000 of GDP has been declined 87.97%. the improvement of industrial water consumption efficiency is the key driving factors for substantial decrease in water consumption.The comparison of water utilization and human development shows that the higher HDI the country is, the more efficient water utilization the country has. water consumption per USD 10000 of GDP in country with HDI>0.9 is 194m³, being 8.5% of that in country with HDI from 0.5 to 0.6. On the premise of maintaining the stable economic and social development of the Silk Road Economic Belt, the realization of the control target of total water consumption must depend on the strict control over the disorderly expansion of irrigated area, the change in the mode of economic growth, the implementation of the development strategy for new industrialization and urbanization, vigorous development of the processing industry with low water consumption as well as the high-tech and high value-added industry. Only in this way, the control target of total water consumption can be realized in the process of completing the industrialization task.

Effects of road type during transport on lamb welfare and meat quality in dry hot climates.

PubMed

Miranda-de la Lama, Genaro C; Monge, Paula; Villarroel, Morris; Olleta, Jose Luis; García-Belenguer, Sylvia; María, Gustavo A

2011-06-01

This study determined whether transporting lambs on paved (PR) or unpaved roads (UR) for 3 h had an effect on plasma stress indicators (cortisol, lactate, glucose, creatine kinase [CK], red blood cells, white blood cells, hematocrit, and neutrophil/lymphocyte [N/L] ratio) and instrumental meat quality (pH24, bruising score, water holding capacity [WHC], color, and texture). A total of 48 Rasa Aragonesa male lambs were used that were approximately 100 days old (12.5 kg ± 1.64, carcass weight). The results suggest that transport on unpaved roads had a significant influence on physiological and hematological stress parameters. Road type had a significant effect on all variables, except for white and red blood cells, and hematocrit levels. The UR lambs had significantly higher (at least p ≤ 0.01) cortisol, lactate, glucose, and CK levels and a higher N/L ratio than PR lambs. Meat from UR lambs had some dark-cutting characteristics, with a darker color, higher ultimate pH, and higher tenderness values than PR. In conclusion, lambs transported on unpaved roads had a more intense stress response and poorer meat quality than lambs transported on paved roads. An effort to improve the logistics associated with route planning is necessary to prevent welfare problems during transport to slaughter.

Leaching behaviour of copper slag, construction and demolition waste and crushed rock used in a full-scale road construction.

PubMed

Lidelöw, Sofia; Mácsik, Josef; Carabante, Ivan; Kumpiene, Jurate

2017-12-15

The leaching behaviour of a road construction with fayalitic copper slag, recycled concrete and crushed rock as sub-base materials was monitored over ten years. All studied materials used in the road construction, including crushed rock, contained concentrations of several elements exceeding the guideline values recommended by the Swedish EPA for total element concentrations for waste materials used in constructions. Despite that, leaching from the road construction under field conditions in general was relatively low. The leachates from the recycled materials contained higher concentrations of several constituents than the leachates from the reference section with crushed rock. The leaching of the elements of interest (Cr, Mo, Ni, Zn) reached peak concentrations during the second and fourth (Cu) years and decreased over the observation period to levels below the Swedish recommended values. Carbonation of the concrete aggregates caused a substantial but short-term increase in the leaching of oxyanions such as chromate. The environmental risks related to element leaching are highest at the beginning of the road life. Ageing of materials or pre-treatment through leaching is needed prior to their use in construction to avoid peak concentrations. Also, the design of road constructions should be adjusted so that recycled materials are covered with low-permeability covers, which would minimize the exposure to atmospheric precipitation and weathering. Copyright © 2017 Elsevier Ltd. All rights reserved.

[Size of lower jaw as an early indicator of skeletal class III development].

PubMed

Stojanović, Zdenka; Nikodijević, Angelina; Udovicić, Bozidar; Milić, Jasmina; Nikolić, Predrag

2008-08-01

Malocclusion of skeletal class III is a complex abnormality, with a characteristic sagital position of the lower jaw in front of the upper one. A higher level of prognatism of the lower jaw in relation to the upper one can be the consequence of its excessive length. The aim of this study was to find the differences in the length of the lower jaw in the children with skeletal class III and the children with normal sagital interjaw relation (skeletal class I) in the period of mixed dentition. After clinical and x-ray diagnostics, profile tele-x-rays of the head were analyzed in 60 examinees with mixed dentition, aged from 6 to 12 years. The examinees were divided into two groups: group 1--the children with skeletal class III and group 2--the children with skeletal class I. The length of the lower jaw, upper jaw and cranial base were measured. The proportional relations between the lengths measured within each group were established and the level of difference in the lengths measured and their proportions between the groups were estimated. No significant difference between the groups was found in the body length, ramus and the total length of the lower jaw. Proportional relation between the body length and the length of the lower jaw ramus and proportional relation between the forward cranial base and the lower jaw body were not significantly different. A significant difference was found in proportional relations of the total length of the lower jaw with the total lengths of cranial base and the upper jaw and proportional relation of the length of the lower and upper jaw body. Of all the analyzed parameters, the following were selected as the early indicators of the development of skeletal class III on the lower jaw: greater total length of the lower jaw, proportional to the total lengths of cranial base and theupper jaw, as well as greater length of the lower jaw body, proportional to the length of the upper jaw body.

Burden of road traffic injuries related to delays in implementing safety belt laws in low- and lower-middle-income countries.

PubMed

Martin, Aurélie; Lagarde, Emmanuel; Salmi, L Rachid

2018-02-28

Delayed implementation of effective road safety policies must be considered when quantifying the avoidable part of the fatal and nonfatal injuries burden. We sought to assess the avoidable part of disability-adjusted life years (DALYs) lost due to road traffic injuries related to delays in implementing road safety laws in low- and lower-middle-income countries. We chose one country for each of the regions of the World Health Organization (WHO) and World Bank (WB) country income levels. We used freely available data sets (WHO, International Traffic Safety Data and Analysis Group, the WB). Delays in implementation were calculated until 2013, from the year mandatory use of safety belts by motor vehicle front seat occupants was first introduced worldwide. We used life expectancy tables and age groups as social values in the DALY calculation model. From the estimated total burden, avoidable DALYs were calculated using estimates of the effectiveness of seat belt laws on fatal and nonfatal injuries combined, as extracted from published international reviews of evidence. From the reference year 1972, implementation delays varied from 27 years (Uzbekistan) to 41 years in Bolivia (no seat belt law as of 2013). During delays, total absolute numbers of DALYs lost due to road traffic injuries reached 8,462,099 in Nigeria, 7,203,570 in Morocco, 4,695,500 in Uzbekistan, 3,866,391 in Cambodia, 3,253,359 in Bolivia, and 3,128,721 in Sri Lanka. Using effectiveness estimates ranging from 3 to 20% reduction, the avoidable burden of road traffic injuries for car occupants was highest in Uzbekistan (avoidable part from 1.2 to 10.4%) and in Morocco (avoidable part from 1.5 to 12.3%). In countries where users of public transport and pedestrians were the most affected by the burden, the avoidable parts ranged from 0.5 to 4.4% (Nigeria) and from 0.5 to 3.4% (Bolivia). Burden of road traffic injuries mostly affected motorcyclists in Sri Lanka and Cambodia where the avoidable parts were less than 2% in both countries. In all selected countries, burden of traffic injuries mostly affected men (about 80%) as well as young people (15-34 years). Despite limited data availability in low- and middle-income countries, the avoidable part of the burden related to delayed intervention is measurable. These results can be used to convince countries to avoid delaying the provision of better protection to road users.

Sex-specific differences in the synaptonemal complex in the genus Oreochromis (Cichlidae).

PubMed

Campos-Ramos, Rafael; Harvey, Simon C; Penman, David J

2009-04-01

Total synaptonemal complex (SC) lengths were estimated from Oreochromis aureus Steindachner (which has a WZ/ZZ sex determination system), O. mossambicus Peters and O. niloticus L. (both of which have XX/XY sex determination systems). The total SC length in oocytes was greater than that in spermatocytes in all three species (194 +/- 30 microm and 134 +/- 13 microm, 187 +/- 22 microm and 127 +/- 17 microm, 193 +/- 37 microm and 144 +/- 19 microm, respectively). These sex-specific differences did not appear to be influenced by the type of sex determination system (the female/male total SC length ratio was 1.45 in O. aureus, 1.47 in O. mossambicus and 1.34 in O. niloticus) and do not correlate with the lack of any overall sex-specific length differences in the current Oreochromis linkage map. Although based on data from relatively few species, there appears to be no consistent relationship between sex-specific SC lengths and linkage map lengths in fish. Neomale (hormonally masculinized genetic female) O. aureus and O. mossambicus had total SC lengths of 138 +/- 13 microm and 146 +/- 13 microm respectively, more similar to normal males than to normal females. These findings agree with data from other vertebrate species that suggest that phenotypic sex, rather than genotype, determines traits such as total SC length, chiasmata position and recombination pattern, at least for the autosomes.

Application of a multistate model to estimate culvert effects on movement of small fishes

USGS Publications Warehouse

Norman, J.R.; Hagler, M.M.; Freeman, Mary C.; Freeman, B.J.

2009-01-01

While it is widely acknowledged that culverted road-stream crossings may impede fish passage, effects of culverts on movement of nongame and small-bodied fishes have not been extensively studied and studies generally have not accounted for spatial variation in capture probabilities. We estimated probabilities for upstream and downstream movement of small (30-120 mm standard length) benthic and water column fishes across stream reaches with and without culverts at four road-stream crossings over a 4-6-week period. Movement and reach-specific capture probabilities were estimated using multistate capture-recapture models. Although none of the culverts were complete barriers to passage, only a bottomless-box culvert appeared to permit unrestricted upstream and downstream movements by benthic fishes based on model estimates of movement probabilities. At two box culverts that were perched above the water surface at base flow, observed movements were limited to water column fishes and to intervals when runoff from storm events raised water levels above the perched level. Only a single fish was observed to move through a partially embedded pipe culvert. Estimates for probabilities of movement over distances equal to at least the length of one culvert were low (e.g., generally ???0.03, estimated for 1-2-week intervals) and had wide 95% confidence intervals as a consequence of few observed movements to nonadjacent reaches. Estimates of capture probabilities varied among reaches by a factor of 2 to over 10, illustrating the importance of accounting for spatially variable capture rates when estimating movement probabilities with capture-recapture data. Longer-term studies are needed to evaluate temporal variability in stream fish passage at culverts (e.g., in relation to streamflow variability) and to thereby better quantify the degree of population fragmentation caused by road-stream crossings with culverts. ?? American Fisheries Society 2009.

A detailed risk assessment of shale gas development on headwater streams in the Pennsylvania portion of the Upper Susquehanna River Basin, U.S.A.

USGS Publications Warehouse

Maloney, Kelly O.; Young, John A.; Faulkner, Stephen; Hailegiorgis, Atesmachew; Slonecker, E. Terrence; Milheim, Lesley

2018-01-01

The development of unconventional oil and gas (UOG) involves infrastructure development (well pads, roads and pipelines), well drilling and stimulation (hydraulic fracturing), and production; all of which have the potential to affect stream ecosystems. Here, we developed a fine-scaled (1:24,000) catchment-level disturbance intensity index (DII) that included 17 measures of UOG capturing all steps in the development process (infrastructure, water withdrawals, probabilistic spills) that could affect headwater streams (< 200 km2 in upstream catchment) in the Upper Susquehanna River Basin in Pennsylvania, U.S.A. The DII ranged from 0 (no UOG disturbance) to 100 (the catchment with the highest UOG disturbance in the study area) and it was most sensitive to removal of pipeline cover, road cover and well pad cover metrics. We related this DII to three measures of high quality streams: Pennsylvania State Exceptional Value (EV) streams, Class A brook trout streams and Eastern Brook Trout Joint Venture brook trout patches. Overall only 3.8% of all catchments and 2.7% of EV stream length, 1.9% of Class A streams and 1.2% of patches were classified as having medium to high level DII scores (> 50). Well density, often used as a proxy for development, only correlated strongly with well pad coverage and produced materials, and therefore may miss potential effects associated with roads and pipelines, water withdrawals and spills. When analyzed with a future development scenario, 91.1% of EV stream length, 68.7% of Class A streams and 80.0% of patches were in catchments with a moderate to high probability of development. Our method incorporated the cumulative effects of UOG on streams and can be used to identify catchments and reaches at risk to existing stressors or future development.

Nonpoint Source Road Salt Pollution from Urban Stormwater

NASA Astrophysics Data System (ADS)

DeGaetano, S.; Walter, M. T.

2014-12-01

In colder climates, such as the Northeast, road salts are commonly applied to deice roads in order to increase pedestrian and driver safety. This study was conducted to establish the mass if NaCl entering the local aquatic systems from Cornell's campus. Using trail cameras, two typical storm water pipes (draining into Cascadilla Creek) were monitored to determine the volume of runoff on an hourly bases. Grab samples were taken three times a week obtain storm water chloride concentration. In general, the average measured salt concentration was found to be 3.61 g/L, while high precipitation events Cl- concentration spiked to levels exceeding 12 g/L (≈ 20 g/L of salt). Combining runoff volumes and salt concentration values, a mass per drainage area was calculated for each monitored pipe. Outfall #1, located just upstream from the Wilson Synchrotron Module, expelled 262,300 kg of salt over a 42-day period of data collection while Outfall#2 discharged 4160 kg during the same period. These results were averaged and then applied to the total impervious area on Cornell's campus to approximate the total mass of sodium chloride leaving campus during the period of data collection.

Retrospective cohort study of an enhanced recovery programme in oesophageal and gastric cancer surgery

PubMed Central

Gatenby, PAC; Shaw, C; Hine, C; Scholtes, S; Koutra, M; Andrew, H; Hacking, M; Allum, WH

2015-01-01

Introduction Enhanced recovery programmes have been established in some areas of elective surgery. This study applied enhanced recovery principles to elective oesophageal and gastric cancer surgery. Methods An enhanced recovery programme for patients undergoing open oesophagogastrectomy, total and subtotal gastrectomy for oesophageal and gastric malignancy was designed. A retrospective cohort study compared length of stay on the critical care unit (CCU), total length of inpatient stay, rates of complications and in-hospital mortality prior to (35 patients) and following (27 patients) implementation. Results In the cohort study, the median total length of stay was reduced by 3 days following oesophagogastrectomy and total gastrectomy. The median length of stay on the CCU remained the same for all patients. The rates of complications and mortality were the same. Conclusions The standardised protocol reduced the median overall length of stay but did not reduce CCU stay. Enhanced recovery principles can be applied to patients undergoing major oesophagogastrectomy and total gastrectomy as long as they have minimal or reversible co-morbidity. PMID:26414360

Multi-level examination of correlates of active transportation to school among youth living within 1 mile of their school.

PubMed

Gropp, Kathleen M; Pickett, William; Janssen, Ian

2012-10-16

Active transportation to school is a method by which youth can build physical activity into their daily routines. We examined correlates of active transportation to school at both individual- (characteristics of the individual and family) and area- (school and neighborhood) levels amongst youth living within 1 mile (1.6 km) of their school. Using the 2009/10 Canadian Health Behaviour in School-Aged Children (HBSC) survey, we selected records of students (n = 3 997) from 161 schools that resided in an urban setting and lived within 1 mile from their school. Student records were compiled from: (1) individual-level HBSC student questionnaires; (2) area-level administrator (school) questionnaires; and (3) area-level geographic information system data sources. The outcome, active transportation to school, was determined via a questionnaire item describing the method of transportation that individual students normally use to get to school. Analyses focused on factors at multiple levels that potentially contribute to student decisions to engage in active transportation. Multi-level logistic regression analyses were employed. Approximately 18% of the variance in active transportation was accounted for at the area-level. Several individual and family characteristics were associated with engagement in active transportation to school including female gender (RR vs. males = 0.86, 95% CI: 0.80-0.91), having ≥2 cars in the household (RR vs. no cars = 0.87, 0.74-0.97), and family socioeconomic status (RR for 'not well off' vs. 'very well off' = 1.14, 1.01-1.26). Neighborhood characteristics most strongly related to active transportation were: the length of roads in the 1 km buffer (RR in quartile 4 vs. quartile 1 = 1.23, 1.00-1.42), the amount of litter in the neighborhood (RR for 'major problem' vs. 'no problem' = 1.47, 1.16-1.57), and relatively hot climates (RR in quartile 4 vs. quartile 1 = 1.33 CI, 1.05-1.53). Engagement in active transportation to school was related to multiple factors at multiple levels. We identified gender, perception of residential neighborhood safety, the percentage of streets with sidewalks, and the total length of roads as the most important correlates of active transportation to school.

Multi-level examination of correlates of active transportation to school among youth living within 1 mile of their school

PubMed Central

2012-01-01

Background Active transportation to school is a method by which youth can build physical activity into their daily routines. We examined correlates of active transportation to school at both individual- (characteristics of the individual and family) and area- (school and neighborhood) levels amongst youth living within 1 mile (1.6 km) of their school. Methods Using the 2009/10 Canadian Health Behaviour in School-Aged Children (HBSC) survey, we selected records of students (n = 3 997) from 161 schools that resided in an urban setting and lived within 1 mile from their school. Student records were compiled from: (1) individual-level HBSC student questionnaires; (2) area-level administrator (school) questionnaires; and (3) area-level geographic information system data sources. The outcome, active transportation to school, was determined via a questionnaire item describing the method of transportation that individual students normally use to get to school. Analyses focused on factors at multiple levels that potentially contribute to student decisions to engage in active transportation. Multi-level logistic regression analyses were employed. Results Approximately 18% of the variance in active transportation was accounted for at the area-level. Several individual and family characteristics were associated with engagement in active transportation to school including female gender (RR vs. males = 0.86, 95% CI: 0.80-0.91), having ≥2 cars in the household (RR vs. no cars = 0.87, 0.74-0.97), and family socioeconomic status (RR for ‘not well off’ vs. ‘very well off’ = 1.14, 1.01-1.26). Neighborhood characteristics most strongly related to active transportation were: the length of roads in the 1 km buffer (RR in quartile 4 vs. quartile 1 = 1.23, 1.00-1.42), the amount of litter in the neighborhood (RR for ‘major problem’ vs. ‘no problem’ = 1.47, 1.16-1.57), and relatively hot climates (RR in quartile 4 vs. quartile 1 = 1.33 CI, 1.05-1.53). Conclusion Engagement in active transportation to school was related to multiple factors at multiple levels. We identified gender, perception of residential neighborhood safety, the percentage of streets with sidewalks, and the total length of roads as the most important correlates of active transportation to school. PMID:23067247

Equine road user safety: public attitudes, understandings and beliefs from a qualitative study in the United Kingdom.

PubMed

Chapman, Catherine; Musselwhite, Charles B A

2011-11-01

Horse riders represent a significant group of vulnerable road user and are involved in a number of accidents and near misses on the road. Despite this horse riders have received little attention both in terms of academic research and transport policy. Based on literature on vulnerable road user safety, including attitudes to road user safety and behaviour of drivers and their relationship with cyclists and motorcyclists, this paper examines the attitudes and reported behaviour of drivers and horse riders. A total of 46 participants took part in six focus groups divided into four groups of drivers with little or no horse riding experience and two groups of frequent horse riders. Each group investigated five key topic areas stemming from the literature review on vulnerable road users including hazard perception, risk perception, emotion, attitudes to sharing the road and empathy. It was found that drivers and horse riders are not always aware of the same hazards in the road and that this may lead drivers to under-estimate the risk when encountering horses. Drivers often had good intentions to overtake horses safely, but were unaware of how vulnerable passing very wide and slow made them feel until they had begun the manoeuvre and hence quickly reduced such feelings either by speeding up or cutting in too soon. However, other than this, drivers had good skills when encountering horses. But these skills could be impeded by frustration when encountering a slow moving horse which was further compounded by a feeling, mainly by younger drivers, that horse riding was for leisure and as such should not get in the way of necessary work journeys. There is a need for drivers to be more aware of the potential hazards a horse rider faces on the road and these could be achieved through inducing empathy amongst drivers for horse riders, creating nudges for drivers in the environment and better education for drivers. Copyright © 2011 Elsevier Ltd. All rights reserved.

Nonfatal road traffic injuries: can road safety campaigns prevent hazardous behavior? An Italian experience.

PubMed

Zampetti, R; Messina, G; Quercioli, C; Vencia, F; Genco, L; Di Bartolomeo, L; Nante, N

2013-01-01

Road traffic injuries are a widespread problem and are very difficult to prevent. The purpose of this study was to verify whether intensive versus basic road safety education programs are associated with different incidence and severity of nonfatal road injuries. The study had an ecological design and involved Local Health Authority One (LHA1) in Salerno, Italy, which includes 20 municipalities. Data on nonfatal road injuries occurring in the periods June to August 2003 and June to August 2008 were obtained from trained operators through the information system of the emergency department. All 20 municipalities received a basic community road safety education program (publicity campaign using bill-posting, brochures, mass media communication with press conferences, articles in local papers, radio and television interviews, and a dedicated LHA1 web site), and 12 municipalities also received an intensive education campaign (in secondary schools, community conferences, and activities organized by police and firefighters). The incidence and severity of nonfatal road traffic injuries were compared between June to August 2003 (before the campaign) and June to August 2008. The total number of injuries in all 20 municipalities in 2003 and 2008 was 907 and 755, respectively. The incidence of injuries decreased in the study period both in the 8 municipalities where only the basic campaign was run (difference in incidence = -0.4; P = .053) and in the 12 municipalities where the intensive campaign was implemented (difference in incidence = -0.5; P < .001); focusing on severity, the incidence of severe injuries decreased or remained the same in the study period in the 2 studied group. The results are coherent with other European studies and show that an overall downward trend exists but is presumably not a direct consequence of road safety education. This does not mean that such campaigns are useless (they are important to raise awareness) but that they should be supplemented with complementary activities in order to be really effective.

Characterization, heavy metal content and health risk assessment of urban road dusts from the historic center of the city of Thessaloniki, Greece.

PubMed

Bourliva, Anna; Christophoridis, Christophoros; Papadopoulou, Lambrini; Giouri, Katerina; Papadopoulos, Argyrios; Mitsika, Elena; Fytianos, Konstantinos

2017-06-01

In the present study, an investigation of the mineralogy and morphology, the heavy metal content and the health risk of urban road dusts from the second largest city of Greece was conducted. For this reason road dust samples from selected sites within the city core area were collected. No differences were observed in the mineralogy of road dusts coming from different sampling sites, and they were mainly consisted of quartz and calcite, while an elevated amorphous content was detected. Morphologically road dusts presented Ca-rich, Fe-rich and silicates particles with various shapes and sizes. The mean concentrations of Cd, Cr, Cu, Mn, Ni, Pb and Zn in road dust were 1.76, 104.9, 662.3, 336.4, 89.43, 209 and 452.8 μg g -1 , respectively. A series of spatial distribution patterns revealed that the hotspot areas were tended to associate with major road junctions and regions with high traffic. Combination of pollution indexes and statistical analyses (correlation analysis, cluster analysis and principal component analysis) revealed that road dusts have a severe influence by anthropogenic activities. In attempt to identify the source of metals through geostatistical and multivariate statistical analyses, it was concluded as follows: Cr, Cu, Fe and Zn mainly originated from tire/break wear and vehicle abrasions, while Cd, Mn and Pb were mainly related to fuel/oil leakage from automobiles along with oil lubricants and vehicle abrasion. Hazard quotient values for children based on total metal concentrations for the road dust ingestion route were lower than safe level (=1). However, the fact that the Hazard Index value for Pb (0.459) which is a particularly toxic metal, was close to safe level, renders essential further investigation in order to provide more reliable characterizations of potential health risks.

Head-on crashes on two-way interurban roads: a public health concern in road safety.

PubMed

Olabarria, Marta; Santamariña-Rubio, Elena; Marí-Dell'Olmo, Marc; Gotsens, Mercè; Novoa, Ana M; Borrell, Carme; Pérez, Katherine

2015-09-01

To describe the magnitude and characteristics of crashes and drivers involved in head-on crashes on two-way interurban roads in Spain between 2007 and 2012, and to identify the factors associated with the likelihood of head-on crashes on these roads compared with other types of crash. A cross-sectional study was conducted using the National Crash Register. The dependent variables were head-on crashes with injury (yes/no) and drivers involved in head-on crashes (yes/no). Factors associated with head-on crashes and with being a driver involved in a head-on crash versus other types of crash were studied using a multivariate robust Poisson regression model to estimate proportion ratios (PR) and confidence intervals (95% CI). There were 9,192 head-on crashes on two-way Spanish interurban roads. A total of 15,412 men and 3,862 women drivers were involved. Compared with other types of crash, head-on collisions were more likely on roads 7 m or more wide, on road sections with curves, narrowings or drop changes, on wet or snowy surfaces, and in twilight conditions. Transgressions committed by drivers involved in head-on crashes were driving in the opposite direction and incorrectly overtaking another vehicle. Factors associated with a lower probability of head-on crashes were the existence of medians (PR=0.57; 95%CI: 0.48-0.68) and a paved shoulder of less than 1.5 meters (PR=0.81; 95%CI: 0.77-0.86) or from 1.5 to 2.45 meters (PR=0.90; 95%CI: 0.84-0.96). This study allowed the characterization of crashes and drivers involved in head-on crashes on two-way interurban roads. The lower probability observed on roads with median strips point to these measures as an effective way to reduce these collisions. Copyright © 2014 SESPAS. Published by Elsevier Espana. All rights reserved.

[Vertebrate mortality in the Guanare-Guanarito road, Portuguesa state, Venezuela].

PubMed

Seijas, Andrés Eloy; Araujo-Quintero, Alexis; Velásquez, Nadines

2013-12-01

Roads directly or indirectly affect the structure, dynamics and function of ecosystems that they traverse. Most studies on the effect of roads on wildlife focus on the evaluation of mortality of vertebrates by vehicle collisions. Despite the extensive road network that exists in Venezuela, studies of wildlife mortality in them are scarce. In this paper, we analyzed the temporal and spatial pattern of vertebrate's collisions along the road Guanare-Guanarito, in Portuguesa state. We travelled 26 times between these towns (74 km) to localize dead vertebrates, at a speed of 50-60km/h. of those trips were conducted from March 13 to October 26, 2010, and 10 additional trips from December 7, 2009 to December 14, 2010; these ones, with the aim to include months and seasons that were insufficiently sampled during the first period. The elapsed time between trips varied from 14 to 37 days. The total distance traveled was 1 924 km. Dead animals found amounted 464 individuals, 66 of them were birds (25 identified species), 130 mammals (15 species) and 268 reptiles (18 species). The species with the highest number of individuals were the snake Leptodeira annulata (n=119), the oppossum Didelphis marsupialis (n=39) and the spectacled caiman Caiman crocodilus (n=33). Excluding domestic animals, the rate of road-killed vertebrates was 0.2282 indiv./km, a figure 28.3% higher than previous studies in the same road. Changes in the relative number of collisions for some species, respect to the numbers reported 20 years ago, were linked to the increase in traffic flow and changes in land use. Road segments with collision rates higher than expected by chance were identified. Collition by cars may be the principal cause of mortality for species like the tamandua (Tamandua tetradactyla) and the giant anteater (Myrmecophaga tridactyla), the last considered a vulnerable species. Some basic measures are proposed to reduce wildlife mortality on the road.

Cost savings associated with 10 years of road safety policies in Catalonia, Spain

PubMed Central

Suelves, Josep M; Barbería, Eneko

2013-01-01

Abstract Objective To determine whether the road safety policies introduced between 2000 and 2010 in Catalonia, Spain, which aimed primarily to reduce deaths from road traffic collisions by 50% by 2010, were associated with economic benefits to society. Methods A cost analysis was performed from a societal perspective with a 10-year time horizon. It considered the costs of: hospital admissions; ambulance transport; autopsies; specialized health care; police, firefighter and roadside assistance; adapting to disability; and productivity lost due to institutionalization, death or sick leave of the injured or their caregivers; as well as material and administrative costs. Data were obtained from a Catalan hospital registry, the Catalan Traffic Service information system, insurance companies and other sources. All costs were calculated in euros (€) at 2011 values. Findings A substantial reduction in deaths from road traffic collisions was observed between 2000 and 2010. Between 2001 and 2010, with the implementation of new road safety policies, there were 26 063 fewer road traffic collisions with victims than expected, 2909 fewer deaths (57%) and 25 444 fewer hospitalizations. The estimated total cost savings were around €18 000 million. Of these, around 97% resulted from reductions in lost productivity. Of the remaining cost savings, 63% were associated with specialized health care, 15% with adapting to disability and 8.1% with hospital care. Conclusion The road safety policies implemented in Catalonia in recent years were associated with a reduction in the number of deaths and injuries from traffic collisions and with substantial economic benefits to society. PMID:23397348

Plot-, farm-, and watershed-scale effects of coffee cultivation in runoff and sediment production in western Puerto Rico.

PubMed

Ramos-Scharrón, Carlos E; Figueroa-Sánchez, Yasiel

2017-11-01

The combination of a topographically abrupt wet-tropical setting with the high level of soil exposure that typifies many sun-grown coffee farms represents optimal conditions for high erosion rates. Although traditionally considered as a main cause for water resource degradation, limited empirical evidence has existed to document its true contribution. This study relies on plot-scale experimental results conducted in western Puerto Rico to assess the impact of cultivated surfaces and farm access roads on runoff and sediment production from the plot to the farm and watershed scales. Results show that unsurfaced and graveled road surfaces produce one- to two-orders of magnitude more per unit area runoff than cultivated lands. Similarly, erosion rates from unsurfaced roads are about 102 g m -2 per cm of rainfall and these are two-orders of magnitude greater than from actively cultivated surfaces. Mitigation practices such as uncompacting road surfaces by ripping and gravel application reduce onsite erosion rates to 0.6% and 8% of unsurfaced conditions, respectively. At the farm scale, coffee farms are estimated to produce sediment at a rate of 12-18 Mg ha -1 yr -1 , and roads are undoubtedly the dominant sediment source responsible for 59-95% of the total sediment produced. The costs associated to ameliorating erosion problems through road graveling are high. Therefore, a combined approach that treats road erosion onsite with one that traps sediment before it reaches river networks is the viable solution to this problem. Copyright © 2017 Elsevier Ltd. All rights reserved.

Influence of low impact development construction on pollutant process of road-deposited sediments and associated heavy metals.

PubMed

Ma, Yukun; Gong, Manli; Zhao, Hongtao; Li, Xuyong

2018-02-01

Intense Low-Impact Development (LID) construction in China could lead to increasingly severe stormwater and receiving water pollution due to the lack of appropriate regulation for mitigating pollution from LID construction. Samples of road-deposited sediments (RDS) were collected from 50 study sites at seven LID construction stages and four road hierarchies to analyze the pollution process and determine the size of the region influenced by LID construction. Six heavy metals were analyzed, and the RDS index model was adopted to estimate the potential heavy metal load washed off by stormwater runoff. Analysis of variance revealed that the excavation and gravel filling of rain gardens and excavation of porous pavements were critical LID construction stages that contributed the largest masses of RDS per unit area to road surfaces. Although the concentration of heavy metals at LID construction sites was lower than at sites without LID construction, the load of heavy metals washed off from LID construction was much higher. In addition, the sizes of regions influenced by accumulated RDS from LID construction descended in the following order: arterial road (600-775m)>collector road (150-200m)>access road (100-150m)>laneway (20-30m). According to the characteristics of LID construction at the study sites, the potential total solid loads in stormwater throughout China were estimated to reach 36,694t by 2020 and 146,777t by 2030. According to the results of analysis, several recommendations are provided for designing LID construction regulations to mitigate stormwater pollution. Copyright © 2017 Elsevier B.V. All rights reserved.

Do climate variables and human density affect Achatina fulica (Bowditch) (Gastropoda: Pulmonata) shell length, total weight and condition factor?

PubMed

Albuquerque, F S; Peso-Aguiar, M C; Assunção-Albuquerque, M J T; Gálvez, L

2009-08-01

The length-weight relationship and condition factor have been broadly investigated in snails to obtain the index of physical condition of populations and evaluate habitat quality. Herein, our goal was to describe the best predictors that explain Achatina fulica biometrical parameters and well being in a recently introduced population. From November 2001 to November 2002, monthly snail samples were collected in Lauro de Freitas City, Bahia, Brazil. Shell length and total weight were measured in the laboratory and the potential curve and condition factor were calculated. Five environmental variables were considered: temperature range, mean temperature, humidity, precipitation and human density. Multiple regressions were used to generate models including multiple predictors, via model selection approach, and then ranked with AIC criteria. Partial regressions were used to obtain the separated coefficients of determination of climate and human density models. A total of 1.460 individuals were collected, presenting a shell length range between 4.8 to 102.5 mm (mean: 42.18 mm). The relationship between total length and total weight revealed that Achatina fulica presented a negative allometric growth. Simple regression indicated that humidity has a significant influence on A. fulica total length and weight. Temperature range was the main variable that influenced the condition factor. Multiple regressions showed that climatic and human variables explain a small proportion of the variance in shell length and total weight, but may explain up to 55.7% of the condition factor variance. Consequently, we believe that the well being and biometric parameters of A. fulica can be influenced by climatic and human density factors.

The modified "Rockfall Hazard Rating System": a new tool for roads risk assessment

NASA Astrophysics Data System (ADS)

Budetta, P.

2003-04-01

This paper contains a modified method for the analysis of rockfall hazard along roads and motorways. The method is derived from that one developed by Pierson et alii at the Oregon State Highway Division. The Rockfall Hazard Rating System (RHRS) provides a rational way to make informed decisions on where and how to spend construction funds. An exponential scoring graph is used to represent the increase in hazard that is reflected in the nine categories forming the classification (slope height, ditch effectiveness, average vehicle risk, percent of decision site distance, roadway width, geological character, quantity of rockfall/event, climate and rock fall history). The resulting total score contains the essential elements regarding the evaluation of the consequences ("cost of failure"). In the modified method, the rating for the categories "ditch effectiveness", "decision sight distance", "rodway width", "geologic characteristic" and "climate and water circulation" have been rendered more easy and objective. The main modifications regard the introduction of the Romana's Slope Mass Rating improving the estimate of the geologic characteristics, of the volume of the potentially unstable blocks and underground water circulation. Other modifications regard the scoring determination for the categories "decision sight distance" and "road geometry". For these categories, the Italian National Council's standards (CNR) have been used. The method must be applied in both the traffic directions because the percentage of reduction in the "decision sight distance" greatly affects the results. An application of the method to a 2-km-long section of the Sorrentine road (n° 145) in Southern Italy was pointed out. A high traffic intensity affects the entire section of the road and rockfalls periodically cause casualties, as well as a large amount of damage and traffic interruptions. The method was applied on seven cross section traces of slopes adjacent to the Sorrentine road and the total final scores range between 275 and 450. For these slopes, the analysis shows that the risk is unacceptable and it must reduced using urgent remedial works. Further applications in other geological environments are welcomed.

Impact assessment of leaf pigments in selected landscape plants exposed to roadside dust.

PubMed

Shah, Kamran; Amin, Noor Ul; Ahmad, Imran; Ara, Gulshan

2018-06-02

Continuous addition of undesired effluents to the environment affects foliar surface of leaf, changes their morphology, stomata, photosynthetic pigments, and biochemical constituents which result in massive damage due to persistent nature of the pollutant. In persistent hostile environment, plants fail to grow and develop, and the effects are often extensive. In current study, landscape plants were exposed to different levels of road dust to analyze the effect on various photosynthetic pigments. Dry roadside sediments were collected through a vacuum pump and passed through filters to get fine particles less than 100 μm and sprinkled on Euphorbia milii (EM), Gardenia jasminoides (GJ), and Hibiscus rosa-sinensis (HRs) by using a hand pump, twice daily at T 1 (control), T 2 , T 3 , and T 4 (0, 2, 4, and 6 g/plant, respectively) for a period of 3 months in green house. Road sediment significantly reduces leaf pigments in landscape plants population and the effects were more severe in high level of dust deposition. Individual response of EM, GJ, and HRs to different levels of road dust was variable; however, road sediment significantly reduces leaf pigments at high dose of roadside dust deposition. EM plants exposed to 2 g/plant roadside dust showed higher chlorophyll-a, chlorophyll-b, total chlorophyll, chlorophyllide-b, and polar carotenoid contents as compared to GJ and HRs. Leaf chlorophyll-a, chlorophyll-b, total chlorophyll, carotenoid, and polar carotenoid contents of EM were higher than GJ and HRs in T 3 and T 4 treatments. However HRs showed significantly higher protochlorophyllide, chlorophyllide-a, and pheophytin-b contents of leaf in T 4 group. EM was found as tolerant landscape plant followed by HRs. GJ was most vulnerable to road dust stress. Present study concludes that the entire biosynthesis of leaf pigments is in chain and interlinked together where effect of road dust on one pigment influences other pigments and their derivatives. Salient features of the present study provide useful evidence to estimate roadside dust as a major risk factor for plant pigments, and plants in green belt along roadside suffer retarded growth and fail to establish and develop.

Predicting length of stay from an electronic patient record system: a primary total knee replacement example.

PubMed

Carter, Evelene M; Potts, Henry W W

2014-04-04

To investigate whether factors can be identified that significantly affect hospital length of stay from those available in an electronic patient record system, using primary total knee replacements as an example. To investigate whether a model can be produced to predict the length of stay based on these factors to help resource planning and patient expectations on their length of stay. Data were extracted from the electronic patient record system for discharges from primary total knee operations from January 2007 to December 2011 (n=2,130) at one UK hospital and analysed for their effect on length of stay using Mann-Whitney and Kruskal-Wallis tests for discrete data and Spearman's correlation coefficient for continuous data. Models for predicting length of stay for primary total knee replacements were tested using the Poisson regression and the negative binomial modelling techniques. Factors found to have a significant effect on length of stay were age, gender, consultant, discharge destination, deprivation and ethnicity. Applying a negative binomial model to these variables was successful. The model predicted the length of stay of those patients who stayed 4-6 days (~50% of admissions) with 75% accuracy within 2 days (model data). Overall, the model predicted the total days stayed over 5 years to be only 88 days more than actual, a 6.9% uplift (test data). Valuable information can be found about length of stay from the analysis of variables easily extracted from an electronic patient record system. Models can be successfully created to help improve resource planning and from which a simple decision support system can be produced to help patient expectation on their length of stay.

Soil Physical, Chemical, and Thermal Characterization, Council Road Site, Seward Peninsula, Alaska, 2016

DOE Data Explorer

Alexander Kholodov; David Graham; Ji-Won Moon

2018-01-22

This dataset provides the results of physical, chemical, and thermal characterization of soils at the Council Road Site at MM71, Seward Peninsula, Alaska. Soil pits were dug on 11 September 2016 at three sites. This dataset includes field observations and descriptions of soil layers or horizons, field measurements of soil volumetric water content, soil temperature, thermal conductivity, and heat capacity. Laboratory measurements of soil properties include gravimetric water content, bulk density, volumetric water content, total carbon and nitrogen, and elemental composition from X-ray fluorescence for some elements.

Spatio-temporal patterns of hazards and their use in risk assessment and mitigation. Case study of road accidents in Romania

NASA Astrophysics Data System (ADS)

Catalin Stanga, Iulian

2013-04-01

Road accidents are among the leading causes of death in many world countries, partly as an inherent consequence of the increasing mobility of today society. The World Health Organization estimates that 1.3 million people died in road accidents in 2011, which means 186 deaths per million. The tragic picture is completed by millions of peoples experiencing different physical injuries or by the enormous social and economic costs that these events imply. Romania has one of the most unsafe road networks within the European Union, with annual averages of 9400 accidents, 8300 injuries and almost 2680 fatalities (2007-2012). An average of 141 death per million is more than twice the average fatality rate in European Union (about 60 death per million). Other specific indicators (accidents or fatalities reported to the road length, vehicle fleet size, driving license owners or adult population etc.) are even worst in the same European context. Road accidents are caused by a complex series of factors, some of them being a relatively constant premise, while others act as catalyzing factors or triggering agent: road features and quality, vehicle technical state, weather conditions, human related factors etc. All these lead to a complex equation with too many unknown variables, making almost impossible a probabilistic approach. However, the high concentration of accidents in a region or in some road sectors is caused by the existence of a specific context, created by factors with permanent or repetitive character, and leads to the idea of a spatial autocorrelation between locations of different adjoining accident. In the same way, the increasing frequency of road accidents and of their causes repeatability in different periods of the year would allow to identify those black timeframes with higher incidence of road accidents. Identifying and analyzing the road blackspots (hotspots) and black zones would help to improve road safety by acting against the common causes that create the spatial or temporal clustering of crash accidents. Since the 1990's, Geographical Informational Systems (GIS) became a very important tool for traffic and road safety management, allowing not only the spatial and multifactorial analysis, but also graphical and non-graphical outputs. The current paper presents an accessible GIS methodology to study the spatio-temporal pattern of injury related road accidents, to identify the high density accidents zones, to make a cluster analysis, to create multicriterial typologies, to identify spatial and temporal similarities and to explain them. In this purpose, a Geographical Information System was created, allowing a complex analysis that involves not only the events, but also a large set of interrelated and spatially linked attributes. The GIS includes the accidents as georeferenced point elements with a spatially linked attribute database: identification information (date, location details); accident type; main, secondary and aggravating causes; data about driver; vehicle information; consequences (damages, injured peoples and fatalities). Each attribute has its own number code that allows both the statistical analysis and the spatial interrogation. The database includes those road accidents that led to physical injuries and loss of human lives between 2007 and 2012 and the spatial analysis was realized using TNTmips 7.3 software facilities. Data aggregation and processing allowed creating the spatial pattern of injury related road accidents through Kernel density estimation at three different levels (national - Romania; county level - Iasi County; local level - Iasi town). Spider graphs were used to create the temporal pattern or road accidents at three levels (daily, weekly and monthly) directly related to their causes. Moreover the spatial and temporal database relates the natural hazards (glazed frost, fog, and blizzard) with the human made ones, giving the opportunity to evaluate the nature of uncertainties in risk assessment. At the end, this paper provides a clustering methodology based on several environmental indicators intended to classify the spatial and temporal hotspots of road traffic insecurity. The results are a useful guide for planners and decision makers in developing effective road safety strategies and measures.

Passive Multistatic Detection of Maritime Targets using Opportunistic Radars

DTIC Science & Technology

2014-03-01

coordinate position for aa =1:1:length(Err_time1) Err_Total1( aa ) = max(abs(Err_time1( aa )),abs(Err_L1( aa ))+abs(Err_thetaR1( aa ))); end for aa =1...1:length(Err_time1) Err_Total1( aa ) = max(abs(Err_Total1( aa )),abs(Err_thetaR1( aa ))); end 93 %%%%%%%%%%%%%%%%%%%%% Tx 2...Err_Total2=zeros(size(Err_time2)); % Find th emax of the three source of error and use that for that % coordinate position for aa =1:1:length

A Hessian-based methodology for automatic surface crack detection and classification from pavement images

NASA Astrophysics Data System (ADS)

Ghanta, Sindhu; Shahini Shamsabadi, Salar; Dy, Jennifer; Wang, Ming; Birken, Ralf

2015-04-01

Around 3,000,000 million vehicle miles are annually traveled utilizing the US transportation systems alone. In addition to the road traffic safety, maintaining the road infrastructure in a sound condition promotes a more productive and competitive economy. Due to the significant amounts of financial and human resources required to detect surface cracks by visual inspection, detection of these surface defects are often delayed resulting in deferred maintenance operations. This paper introduces an automatic system for acquisition, detection, classification, and evaluation of pavement surface cracks by unsupervised analysis of images collected from a camera mounted on the rear of a moving vehicle. A Hessian-based multi-scale filter has been utilized to detect ridges in these images at various scales. Post-processing on the extracted features has been implemented to produce statistics of length, width, and area covered by cracks, which are crucial for roadway agencies to assess pavement quality. This process has been realized on three sets of roads with different pavement conditions in the city of Brockton, MA. A ground truth dataset labeled manually is made available to evaluate this algorithm and results rendered more than 90% segmentation accuracy demonstrating the feasibility of employing this approach at a larger scale.

Three Three-Axis IEPE Accelerometers on the Inner Liner of a Tire for Finding the Tire-Road Friction Potential Indicators.

PubMed

Niskanen, Arto; Tuononen, Ari J

2015-08-05

Direct tire-road contact friction estimation is essential for future autonomous cars and active safety systems. Friction estimation methods have been proposed earlier for driving conditions in the presence of a slip angle or slip ratio. However, the estimation of the friction from a freely-rolling tire is still an unsolved topic. Knowing the existing friction potential would be beneficial since vehicle control systems could be adjusted before any remarkable tire force has been produced. Since accelerometers are well-known and robust, and thus a promising sensor type for intelligent tires, this study uses three three-axis IEPE accelerometers on the inner liner of a tire to detect friction potential indicators on two equally smooth surfaces with different friction levels. The equal roughness was chosen for both surfaces in order to study the friction phenomena by neglecting the effect of surface texture on vibrations. The acceleration data before the contact is used to differentiate the two friction levels between the tire and the road. In addition, the contact lengths from the three accelerometers are used to validate the acceleration data. A method to differentiate the friction levels on the basis of the acceleration signal is also introduced.

Three Three-Axis IEPE Accelerometers on the Inner Liner of a Tire for Finding the Tire-Road Friction Potential Indicators †

PubMed Central

Niskanen, Arto; Tuononen, Ari J.

2015-01-01

Direct tire-road contact friction estimation is essential for future autonomous cars and active safety systems. Friction estimation methods have been proposed earlier for driving conditions in the presence of a slip angle or slip ratio. However, the estimation of the friction from a freely-rolling tire is still an unsolved topic. Knowing the existing friction potential would be beneficial since vehicle control systems could be adjusted before any remarkable tire force has been produced. Since accelerometers are well-known and robust, and thus a promising sensor type for intelligent tires, this study uses three three-axis IEPE accelerometers on the inner liner of a tire to detect friction potential indicators on two equally smooth surfaces with different friction levels. The equal roughness was chosen for both surfaces in order to study the friction phenomena by neglecting the effect of surface texture on vibrations. The acceleration data before the contact is used to differentiate the two friction levels between the tire and the road. In addition, the contact lengths from the three accelerometers are used to validate the acceleration data. A method to differentiate the friction levels on the basis of the acceleration signal is also introduced. PMID:26251914

Towards a Metropolitan Fundamental Diagram Using Travel Survey Data

PubMed Central

2016-01-01

Using travel diary data from 2000–2001 and 2010–2012 this research examines fundamental traffic relationships at the metropolitan level. The results of this paper can help to explain the causes of some traffic phenomena. Network average speed by time of day can be explained by trip length and cumulative number of vehicles on the road. A clockwise hysteresis loop is found in the Metropolitan Fundamental Diagram in the morning period and a reverse process happens in the afternoon. PMID:26866913

Linear Distributed GaN MMIC Power Amplifier with Improved Power-added Efficiency

DTIC Science & Technology

2017-03-01

Laboratories, 3011 Malibu Canyon Road, Malibu, CA 90265 Abstract: We report on a multi-octave (100 MHz ‒ 8 GHz), linear nonuniform distributed...amplifier (NDPA) in a MMIC architecture using scaled 120-nm short-gate- length GaN HEMTs. The linear NDPAs were built with six sections in a nonuniform ...MHz ‒ 8 GHz) GaN MMIC nonuniform distributed amplifier (NDPA) with built-in linearization and a gm3 cancellation method in class A and class C

Boundary Connection Behavior and Connection Design for Retrofitted Unreinforced Masonry Walls Subjected to Blast Loads (Preprint)

DTIC Science & Technology

2010-02-01

supports. Figure 2 – FBD of Retrofitting Component The new deformed axial length of t he m embrane resulting from the applied lateral load is...BLAST LOADS John Hoemann U.S. Army Engineer Research & Development Center (CEERD-GS-V) 3909 Halls Ferry Road Vicksburg, MS 39180 James... joint owner of the work. If published, ASCE Structures Congress may assert copyright. If so, the United States has for itself and others acting on

Morphological observation and length-weight relationship of critically endangered riverine catfish Rita rita (Hamilton).

PubMed

Amin, M R; Mollah, M F A; Taslima, K; Muhammadullah

2014-01-15

The experiment was conducted to investigate the morphological status of the critically endangered riverine catfish Rita rita using morphometric and meristic traits. About 158 species of Rita were collected from the old Brahmaputra river in Mymensingh district and were studied in the laboratory of the Fisheries Biology and Genetics Department, Bangladesh Agricultural University. Measurement of length and weight of Rita were recorded by using measuring scale and electric balance respectively. Significant curvilinear relationship existed between total length and other morphometric characters and between head length and other characters of the head. Relationships between total length and various body measurements of the fish were highly significant (p < 0.01) except the relationship between total length and pelvic fin length of male fish (p < 0.05). In case of meristic characters-dorsal fin rays, pelvic fin rays, pectoral fin rays, anal fin rays, caudal fin rays, number of vertebrae and branchiostegal rays were found to be more or less similar except slight differences. The values of condition factors (k) in the total length body-weight relationships for female and male were found to be 0.41 and 0.38, respectively. The mean values of relative condition factors (kn) were 1.0 and 1.005 for female and male, respectively.

How Does Definition of Minimum Break Length Affect Objective Measures of Sitting Outcomes Among Office Workers?

PubMed

Kloster, Stine; Danquah, Ida Høgstedt; Holtermann, Andreas; Aadahl, Mette; Tolstrup, Janne Schurmann

2017-01-01

Harmful health effects associated with sedentary behavior may be attenuated by breaking up long periods of sitting by standing or walking. However, studies assess interruptions in sitting time differently, making comparisons between studies difficult. It has not previously been described how the definition of minimum break duration affects sitting outcomes. Therefore, the aim was to address how definitions of break length affect total sitting time, number of sit-to-stand transitions, prolonged sitting periods and time accumulated in prolonged sitting periods among office workers. Data were collected from 317 office workers. Thigh position was assessed with an ActiGraph GT3X+ fixed on the right thigh. Data were exported with varying bout length of breaks. Afterward, sitting outcomes were calculated for the respective break lengths. Absolute numbers of sit-to-stand transitions decreased, and number of prolonged sitting periods and total time accumulated in prolonged sitting periods increased, with increasing minimum break length. Total sitting time was not influenced by varying break length. The definition of minimum break length influenced the sitting outcomes with the exception of total sitting time. A standard definition of break length is needed for comparison and interpretation of studies in the evolving research field of sedentary behavior.

Life cycle assessment of disposal of residues from municipal solid waste incineration: recycling of bottom ash in road construction or landfilling in Denmark evaluated in the ROAD-RES model.

PubMed

Birgisdóttir, H; Bhander, G; Hauschild, M Z; Christensen, T H

2007-01-01

Two disposal methods for MSWI bottom ash were assessed in a new life cycle assessment (LCA) model for road construction and disposal of residues. The two scenarios evaluated in the model were: (i) landfilling of bottom ash in a coastal landfill in Denmark and (ii) recycling of bottom ash as subbase layer in an asphalted secondary road. The LCA included resource and energy consumption, and emissions associated with upgrading of bottom ash, transport, landfilling processes, incorporation of bottom ash in road, substitution of natural gravel as road construction material and leaching of heavy metals and salts from bottom ash in road as well as in landfill. Environmental impacts associated with emissions to air, fresh surface water, marine surface water, groundwater and soil were aggregated into 12 environmental impact categories: Global Warming, Photochemical Ozone Formation, Nutrient Enrichment, Acidification, Stratospheric Ozone Depletion, Human Toxicity via air/water/soil, Ecotoxicity in water/soil, and a new impact category, Stored Ecotoxicity to water/soil that accounts for the presence of heavy metals and very persistent organic compounds that in the long-term might leach. Leaching of heavy metals and salts from bottom ash was estimated from a series of laboratory leaching tests. For both scenarios, Ecotoxicity(water) was, when evaluated for the first 100 yr, the most important among the twelve impact categories involved in the assessment. Human Toxicity(soil) was also important, especially for the Road scenario. When the long-term leaching of heavy metals from bottom ash was evaluated, based on the total content of heavy metals in bottom ash, all impact categories became negligible compared to the potential Stored Ecotoxicity, which was two orders of magnitudes greater than Ecotoxicity(water). Copper was the constituent that gave the strongest contributions to the ecotoxicities. The most important resources consumed were clay as liner in landfill and the groundwater resource which was potentially spoiled due to leaching of salts from bottom ash in road. The difference in environmental impacts between landfilling and utilization of bottom ash in road was marginal when these alternatives were assessed in a life cycle perspective.

The world’s user-generated road map is more than 80% complete

PubMed Central

2017-01-01

OpenStreetMap, a crowdsourced geographic database, provides the only global-level, openly licensed source of geospatial road data, and the only national-level source in many countries. However, researchers, policy makers, and citizens who want to make use of OpenStreetMap (OSM) have little information about whether it can be relied upon in a particular geographic setting. In this paper, we use two complementary, independent methods to assess the completeness of OSM road data in each country in the world. First, we undertake a visual assessment of OSM data against satellite imagery, which provides the input for estimates based on a multilevel regression and poststratification model. Second, we fit sigmoid curves to the cumulative length of contributions, and use them to estimate the saturation level for each country. Both techniques may have more general use for assessing the development and saturation of crowd-sourced data. Our results show that in many places, researchers and policymakers can rely on the completeness of OSM, or will soon be able to do so. We find (i) that globally, OSM is ∼83% complete, and more than 40% of countries—including several in the developing world—have a fully mapped street network; (ii) that well-governed countries with good Internet access tend to be more complete, and that completeness has a U-shaped relationship with population density—both sparsely populated areas and dense cities are the best mapped; and (iii) that existing global datasets used by the World Bank undercount roads by more than 30%. PMID:28797037

Discrete tyre model application for evaluation of vehicle limit handling performance

NASA Astrophysics Data System (ADS)

Siramdasu, Y.; Taheri, S.

2016-11-01

The goal of this study is twofold, first, to understand the transient and nonlinear effects of anti-lock braking systems (ABS), road undulations and driving dynamics on lateral performance of tyre and second, to develop objective handling manoeuvres and respective metrics to characterise these effects on vehicle behaviour. For studying the transient and nonlinear handling performance of the vehicle, the variations of relaxation length of tyre and tyre inertial properties play significant roles [Pacejka HB. Tire and vehicle dynamics. 3rd ed. Butterworth-Heinemann; 2012]. To accurately simulate these nonlinear effects during high-frequency vehicle dynamic manoeuvres, requires a high-frequency dynamic tyre model (? Hz). A 6 DOF dynamic tyre model integrated with enveloping model is developed and validated using fixed axle high-speed oblique cleat experimental data. Commercially available vehicle dynamics software CarSim® is used for vehicle simulation. The vehicle model was validated by comparing simulation results with experimental sinusoidal steering tests. The validated tyre model is then integrated with vehicle model and a commercial grade rule-based ABS model to perform various objective simulations. Two test scenarios of ABS braking in turn on a smooth road and accelerating in a turn on uneven and smooth roads are considered. Both test cases reiterated that while the tyre is operating in the nonlinear region of slip or slip angle, any road disturbance or high-frequency brake torque input variations can excite the inertial belt vibrations of the tyre. It is shown that these inertial vibrations can directly affect the developed performance metrics and potentially degrade the handling performance of the vehicle.

Meta-analysis of the effect of road work zones on crash occurrence.

PubMed

Theofilatos, Athanasios; Ziakopoulos, Apostolos; Papadimitriou, Eleonora; Yannis, George; Diamandouros, Konstantinos

2017-11-01

There is strong evidence that work zones pose increased risk of crashes and injuries. The two most common risk factors associated with increased crash frequencies are work zone duration and length. However, relevant research on the topic is relatively limited. For that reason, this paper presents formal meta-analyses of studies that have estimated the relationship between the number of crashes and work zone duration and length, in order to provide overall estimates of those effects on crash frequencies. All studies presented in this paper are crash prediction models with similar specifications. According to the meta-analyses and after correcting for publication bias when it was considered appropriate, the summary estimates of regression coefficients were found to be 0.1703 for duration and 0.862 for length. These effects were significant for length but not for duration. However, the overall estimate of duration was significant before correcting for publication bias. Separate meta-analyses on the studies examining both duration and length was also carried out in order to have rough estimates of the combined effects. The estimate of duration was found to be 0.953, while for length was 0.847. Similar to previous meta-analyses the effect of duration after correcting for publication bias is not significant, while the effect of length was significant at a 95% level. Meta-regression findings indicate that the main factors influencing the overall estimates of the beta coefficients are study year and region for duration and study year and model specification for length. Copyright © 2017 Elsevier Ltd. All rights reserved.

Estimation of road vehicle exhaust emissions from 1992 to 2010 and comparison with air quality measurements in Genoa, Italy

NASA Astrophysics Data System (ADS)

Zamboni, Giorgio; Capobianco, Massimo; Daminelli, Enrico

An investigation into road transport exhaust emissions in the Genoa urban area was performed by comparing the quantities of carbon monoxide (CO), nitrogen oxides (NO x), nitrogen dioxide (NO 2) and particulate matter (PM) emitted by different vehicle categories with air quality measurements referred to the same pollutants. Exhaust emissions were evaluated by applying the PROGRESS (computer PROGramme for Road vehicle EmiSSions evaluation) code, developed by the Internal Combustion Engines Group of the University of Genoa, to eight different years (from 1992 to 2010), considering spark ignition and Diesel passenger cars and light duty vehicles, heavy duty vehicles and buses, motorcycles and mopeds. Changes in terms of vehicles number, mileage and total emissions are presented together with relative distributions among the various vehicle categories. By comparing 1992 and 2010 data, calculated trends show a 7% increase in the number of vehicles, with total mileage growing at a faster rate (approx. 22%); total emissions decrease considerably, by approximately 50% for NO x and PM, 70% for HC and 80% for CO, due to improvements in engines and fuels forced by the stricter European legislation and the fleet renewal, while primary NO 2 emission will be very close to 1992 level, after a decrease of about 18% in 2000. Air quality was analysed by selecting traffic and background measuring stations from the monitoring network managed by the Environmental Department of the Province of Genoa: average annual concentrations of considered pollutants from 1994 to 2007 were calculated in order to obtain the relative historical trends and compare them with European public health limits and with road vehicle emissions. Though an important reduction in pollutant concentrations has been achieved as a consequence of cleaner vehicles, some difficulties in complying with present and/or future NO 2 and PM 10 limits are also apparent, thus requiring suitable measures to be taken by the local authorities.

Young Age as a Predictor of Poor Road Safety Practices of Commercial Motorcyclists in Oyo State, Nigeria.

PubMed

Olumide, Adesola O; Owoaje, Eme T

2015-01-01

This study examined the association between young age and poor road safety practices of commercial motorcyclists in Oyo state, Nigeria. A cross-sectional study of 371 commercial motorcyclists selected via a multistage sampling technique was conducted. Information on sociodemographic characteristics and road safety practices (possession of a valid license, helmet use, number of passengers carried per trip, and compliance with 10 selected traffic signs) was obtained with the aid of an interviewer-administered questionnaire. Individual road safety practice items were scored and a total score was obtained giving minimum and maximum obtainable scores of 0 and 35. Respondents with scores ≤ 17.5 (i.e., less than or equal to half of the maximum obtainable score of 35) were categorized as having poor road safety practices. Descriptive statistics, chi-square, and multiple logistic regression tests were conducted. Selected sociodemographic and occupation-related factors were controlled for in the logistic regression analysis. All respondents were male, 80.1% had been riding for commercial purposes for less than 5 years, and 73.0% had other jobs in addition to commercial riding. Road safety practices were generally poor; that is, 84.4% of commercial riders were categorized as having poor road safety practices. Almost all (98.6%) respondents aged < 25 years compared to 84.3% of those aged 25 to <35 years and 76.8% of those ≥35 years had poor road safety practices. This difference was statistically significant. Following logistic regression, younger age (<25 years) remained predictive of poor road safety practices. Motorcyclists aged < 25 years had about 16 times higher odds of having poor road safety practices compared to those aged 35 years and more (odds ratio = 15.72, 95% confidence interval, 1.82-135.91). Most studies conduct only bivariate analysis to test the association between age and road practices of commercial motorcyclists; however, we investigated the influence of potential confounding variables using multivariate analysis. Our findings confirmed young age as a predictor of poor road safety practices among our sample of commercial motorcyclists and emphasizes the need for road safety programs to target this category of riders. The current minimum age for obtaining a rider's license in Nigeria is 18 years; our findings suggest that it might be beneficial to increase the age at which riders in our study area can obtain a commercial rider's license to above 25 years.

Assessment of Air Pollution Effects on the Respiratory System Based on Pulmonary Function Tests Performed During Spirometry Days.

PubMed

Dąbrowiecki, Piotr; Mucha, Dominika; Gayer, Anna; Adamkiewicz, Łukasz; Badyda, Artur J

2015-01-01

The Polish Spirometry Day is an initiative aimed at increasing awareness of the causes, symptoms, course, and effects that accompany respiratory diseases, especially asthma and chronic obstructive pulmonary disease (COPD). In 2013, the second edition of the Spirometry Day was held. It gathered 180 medical centers and other institution. The final analysis encompassed a total of 1187 persons from 26 different locations, including rural areas, and smaller and larger city agglomerations. Of this total, 755 persons (63.6 %) completed their spirometry tests for the first time in life. Each person fulfilled a questionnaire regarding the personal information, respiratory diseases, symptoms, lifestyle, and a place of residence. In the total group, 234 (19.7 %) cases of bronchial obstruction were diagnosed. A hundred and thirty four persons with obstruction, among those tested for the first time in life (17.8 %), were unaware of their disease. The lowest values of FEV1 and FEF(1)/FVC, corresponding to the highest percentage of persons with obstruction (27.9 %) were observed in small and medium cities (100,000-500,000 inhabitants). There were differences in the prevalence of obstruction depending on the distance of the place of residence from a busy traffic road. A significant decrease of both spirometric variables was observed among people living in cities above 100,000 inhabitants within a distance lower than 50 m from roads. In general, better spirometry results were observed among inhabitants living more than 150 m from main roads.

Road casualties in work-related and private contexts: Occupational medical impact: Results from the ESPARR cohort.

PubMed

Fort, E; Pélissier, C; Fanjas, A; Charnay, P; Charbotel, B; Bergeret, A; Fontana, L; Hours, M

2018-05-22

Road accidents may impact victims' physical and/or mental health and socio-occupational life, notably including return to work. To assess whether the occupational medical consequences sustained by subjects injured in road accidents occurring in a work-related context differ from those associated with private accidents. 778 adults who were in work or occupational training at the time of their accident were included. Two groups were distinguished: 354 (45.5%) injured in road accidents occurring in a work-related context (commuting or on duty) and 424 (54.5%) injured in a private accident. The groups were compared on medical and occupational factors assessed on prospective follow-up at 6 months and 1 and 3 years. Multivariate analysis explored for factors associated at 6 months and 1 year with sick leave following the accident and duration of sick leave. There were no significant differences between groups for demographic data apart from a slightly higher injury severity in private accidents (32.5% of private accidents with MAIS3+(Maximum Abbreviated Injury Scale greater or equal to 3) vs. 23.7% for work-related accidents, p = 0.007). Victims of work-related accidents were more often on sick leave (OR = 1.8; 95% CI, 1.1-2.9). Although the length of sick leave is higher for work-related accidents that for private accidents, multivariate analysis showed that the injury severity and the post-traumatic stress disorder (PTSD) are significant factors to explain the time to return to work. There were no significant differences according to occupational impact during follow-up, notably including sick-leave duration, number of victims returning to work within 3 years and number of victims out of work due to incapacity. In the ESPARR (follow-up study of a road-accident population in the Rhône administrative county: Etude de Suivi d'une Population d'Accidentés de la Route dans le Rhône) cohort, the fact that a road accident occurred in a work-related context did not affect the occupational consequences.

Quantifying precision of in situ length and weight measurements of fish

USGS Publications Warehouse

Gutreuter, S.; Krzoska, D.J.

1994-01-01

We estimated and compared errors in field-made (in situ) measurements of lengths and weights of fish. We made three measurements of length and weight on each of 33 common carp Cyprinus carpio, and on each of a total of 34 bluegills Lepomis macrochirus and black crappies Pomoxis nigromaculatus. Maximum total lengths of all fish were measured to the nearest 1 mm on a conventional measuring board. The bluegills and black crappies (85–282 mm maximum total length) were weighed to the nearest 1 g on a 1,000-g spring-loaded scale. The common carp (415–600 mm maximum total length) were weighed to the nearest 0.05 kg on a 20-kg spring-loaded scale. We present a statistical model for comparison of coefficients of variation of length (Cl ) and weight (Cw ). Expected Cl was near zero and constant across mean length, indicating that length can be measured with good precision in the field. Expected Cw decreased with increasing mean length, and was larger than expected Cl by 5.8 to over 100 times for the bluegills and black crappies, and by 3 to over 20 times for the common carp. Unrecognized in situ weighing errors bias the apparent content of unique information in weight, which is the information not explained by either length or measurement error. We recommend procedures to circumvent effects of weighing errors, including elimination of unnecessary weighing from routine monitoring programs. In situ weighing must be conducted with greater care than is common if the content of unique and nontrivial information in weight is to be correctly identified.

Effects of the Length of Stay on the Cost of Total Knee and Total Hip Arthroplasty from 2002 to 2013.

PubMed

Molloy, Ilda B; Martin, Brook I; Moschetti, Wayne E; Jevsevar, David S

2017-03-01

Utilization of total knee and hip arthroplasty has greatly increased in the past decade in the United States; these are among the most expensive procedures in patients with Medicare. Advances in surgical techniques, anesthesia, and care pathways decrease hospital length of stay. We examined how trends in hospital cost were altered by decreases in length of stay. Procedure, demographic, and economic data were collected on 6.4 million admissions for total knee arthroplasty and 2.8 million admissions for total hip arthroplasty from 2002 to 2013 using the National (Nationwide) Inpatient Sample, a component of the Healthcare Cost and Utilization Project. Trends in mean hospital costs and their association with length of stay were estimated using inflation-adjusted, survey-weighted generalized linear regression models, controlling for patient demographic characteristics and comorbidity. From 2002 to 2013, the length of stay decreased from a mean time of 4.06 to 2.97 days for total knee arthroplasty and from 4.06 to 2.75 days for total hip arthroplasty. During the same time period, the mean hospital cost for total knee arthroplasty increased from $14,988 (95% confidence interval [CI], $14,927 to $15,049) in 2002 to $22,837 (95% CI, $22,765 to $22,910) in 2013 (an overall increase of $7,849 or 52.4%). The mean hospital cost for total hip arthroplasty increased from $15,792 (95% CI, $15,706 to $15,878) in 2002 to $23,650 (95% CI, $23,544 to $23,755) in 2013 (an increase of $7,858 or 49.8%). If length of stay were set at the 2002 mean, the growth in cost for total knee arthroplasty would have been 70.8% instead of 52.4% as observed, and the growth in cost for total hip arthroplasty would have been 67.4% instead of 49.8% as observed. Hospital costs for joint replacement increased from 2002 to 2013, but were attenuated by reducing inpatient length of stay. With demographic characteristics showing an upward trend in the utilization of joint arthroplasty, including a shift toward younger population groups, reduction in length of stay remains an important target for procedure-level cost containment under emerging payment models.

Deposition of motor vehicle emissions and winter maintenance along roadside assessed by snow analyses.

PubMed

Hautala, E L; Rekilä, R; Tarhanen, J; Ruuskanen, J

1995-01-01

A vertical snow-sampling method, where a sample was taken throughout the snowpack, was used to estimate the pollutant load on a roadside where average daily traffic density was about 9100 motor vehicles. The snow samples were collected at two sites, forest and open field, at two distances of 10 and 30 m from the road. The concentrations of inorganic anions (Cl(-), NO(-)(3), SO(2-)(4)), total N, polycyclic aromatic hydrocarbons (PAHs) and polychlorinated phenols (PCPhs) were analysed. The results suggest that on roadsides there is a deposition caused by road traffic emissions and winter maintenance which exceeds normal background deposition. Inorganic anions mainly in particle form, originating from winter maintenance, are deposited near the road. PAHs with low molecular weight (

Assessment of annoyance due to urban road traffic noise combined with tramway noise.

PubMed

Klein, A; Marquis-Favre, C; Champelovier, P

2017-01-01

Due to the expansion of urban areas, an increasing number of residents are exposed to combined community noise sources. Studies show that the exposure to transportation noise significantly affects health and well-being. Noise annoyance is one of these adverse health effects. Up to now, annoyance due to transportation noise is mostly assessed considering single noise exposure situations neglecting the effects of potential interactions between noise sources. In this study, perceptual phenomena involved in noise annoyance due to combined urban road traffic and tramway noises are assessed in laboratory conditions with imaginary and simulated contexts. The urban road traffic was composed of light vehicles, heavy vehicles, buses, and powered-two-wheelers in different driving conditions. The tramway traffic corresponded to tramways in in-curve operating configurations. It could be shown that the road traffic and tramway traffic partial annoyance responses were influenced by each other. Throughout the experiments the strongest component effect prevailed but secondary phenomena could also be observed. Considering the perceptual phenomena highlighted in the analysis, it is shown that total noise annoyance due to the combined noises can be most adequately predicted by the strongest component model. This result was obtained by calculating partial annoyance responses due to urban road and tramway traffic.

A cluster analysis on road traffic accidents using genetic algorithms

NASA Astrophysics Data System (ADS)

Saharan, Sabariah; Baragona, Roberto

2017-04-01

The analysis of traffic road accidents is increasingly important because of the accidents cost and public road safety. The availability or large data sets makes the study of factors that affect the frequency and severity accidents are viable. However, the data are often highly unbalanced and overlapped. We deal with the data set of the road traffic accidents recorded in Christchurch, New Zealand, from 2000-2009 with a total of 26440 accidents. The data is in a binary set and there are 50 factors road traffic accidents with four level of severity. We used genetic algorithm for the analysis because we are in the presence of a large unbalanced data set and standard clustering like k-means algorithm may not be suitable for the task. The genetic algorithm based on clustering for unknown K, (GCUK) has been used to identify the factors associated with accidents of different levels of severity. The results provided us with an interesting insight into the relationship between factors and accidents severity level and suggest that the two main factors that contributes to fatal accidents are "Speed greater than 60 km h" and "Did not see other people until it was too late". A comparison with the k-means algorithm and the independent component analysis is performed to validate the results.

An Energy-Efficient Cluster-Based Vehicle Detection on Road Network Using Intention Numeration Method

PubMed Central

Devasenapathy, Deepa; Kannan, Kathiravan

2015-01-01

The traffic in the road network is progressively increasing at a greater extent. Good knowledge of network traffic can minimize congestions using information pertaining to road network obtained with the aid of communal callers, pavement detectors, and so on. Using these methods, low featured information is generated with respect to the user in the road network. Although the existing schemes obtain urban traffic information, they fail to calculate the energy drain rate of nodes and to locate equilibrium between the overhead and quality of the routing protocol that renders a great challenge. Thus, an energy-efficient cluster-based vehicle detection in road network using the intention numeration method (CVDRN-IN) is developed. Initially, sensor nodes that detect a vehicle are grouped into separate clusters. Further, we approximate the strength of the node drain rate for a cluster using polynomial regression function. In addition, the total node energy is estimated by taking the integral over the area. Finally, enhanced data aggregation is performed to reduce the amount of data transmission using digital signature tree. The experimental performance is evaluated with Dodgers loop sensor data set from UCI repository and the performance evaluation outperforms existing work on energy consumption, clustering efficiency, and node drain rate. PMID:25793221

An energy-efficient cluster-based vehicle detection on road network using intention numeration method.

PubMed

Devasenapathy, Deepa; Kannan, Kathiravan

2015-01-01

The traffic in the road network is progressively increasing at a greater extent. Good knowledge of network traffic can minimize congestions using information pertaining to road network obtained with the aid of communal callers, pavement detectors, and so on. Using these methods, low featured information is generated with respect to the user in the road network. Although the existing schemes obtain urban traffic information, they fail to calculate the energy drain rate of nodes and to locate equilibrium between the overhead and quality of the routing protocol that renders a great challenge. Thus, an energy-efficient cluster-based vehicle detection in road network using the intention numeration method (CVDRN-IN) is developed. Initially, sensor nodes that detect a vehicle are grouped into separate clusters. Further, we approximate the strength of the node drain rate for a cluster using polynomial regression function. In addition, the total node energy is estimated by taking the integral over the area. Finally, enhanced data aggregation is performed to reduce the amount of data transmission using digital signature tree. The experimental performance is evaluated with Dodgers loop sensor data set from UCI repository and the performance evaluation outperforms existing work on energy consumption, clustering efficiency, and node drain rate.

Bidirectional recovery patterns of Mojave Desert vegetation in an aqueduct pipeline corridor after 36 years: II. Annual plants

USGS Publications Warehouse

Berry, Kristin H.; Mack, Jeremy S.; Weigand, James F.; Gowan, Timothy A.; LaBerteaux, Denise

2015-01-01

We studied recovery of winter annual plants in a 97-m wide disturbed aqueduct corridor in the Mojave Desert 36 years after construction. We established plots at 0, 20, and 40 m from the road verge at the corridor center and at 100 m in undisturbed vegetation. We recorded 47 annual species, of which 41 were native and six were exotic. Exotic species composed from 64 to 91% of total biomass. We describe a bilateral process of recovery: from the road verge to the outward edge of the corridor and from undisturbed habitat into the corridor. Native annual plants significantly increased in richness from road verge to undisturbed vegetation, but not in density, biomass, or cover. In contrast, exotic annual plants increased in density, biomass, cover and richness with increasing distance from the road verge. The species of colonizing shrubs and type of canopy cover affected density, biomass, and richness of annuals. Species composition of native annuals differed significantly by distance, suggesting secondary succession. In general, native annuals were closer to achieving recovery on the 40-m plots than at the road verge. Recovery estimates were in centuries and dependent on location, canopy type, and whether considering all annuals or natives only.

Quantifying the causal effects of 20mph zones on road casualties in London via doubly robust estimation.

PubMed

Li, Haojie; Graham, Daniel J

2016-08-01

This paper estimates the causal effect of 20mph zones on road casualties in London. Potential confounders in the key relationship of interest are included within outcome regression and propensity score models, and the models are then combined to form a doubly robust estimator. A total of 234 treated zones and 2844 potential control zones are included in the data sample. The propensity score model is used to select a viable control group which has common support in the covariate distributions. We compare the doubly robust estimates with those obtained using three other methods: inverse probability weighting, regression adjustment, and propensity score matching. The results indicate that 20mph zones have had a significant causal impact on road casualty reduction in both absolute and proportional terms. Copyright © 2016 Elsevier Ltd. All rights reserved.

Relationship between road traffic noisescape and urban form in Hong Kong.

PubMed

Lam, Kin-Che; Ma, Weichun; Chan, Pak Kin; Hui, Wing Chi; Chung, King Lam; Chung, Yi-tak Teresa; Wong, Chun Yin; Lin, Hui

2013-12-01

This paper reports on a study which explored the possible relationship between road traffic noisescape and urban form in Hong Kong. A total of 212 residential complexes from 11 contrasting urban forms were sampled, and their noise levels assessed both at dwelling and neighbourhood scales by noise mapping. Its findings indicate that residential complexes with different urban forms have significantly different noisescape attributes. There is a strong correlation between the noise characteristics and morphological indicators at the dwelling scale. A less obstreperous noisescape is associated with urban forms with lower road and building densities, and with building arrangements which provide self-noise screening. These findings suggest that urban form is an influential determinant of the noisescape in the urban environment, and they point to the need to rethink the conventional approach to managing the urban acoustic environment.

Field trips along the Geological Transpyrenean Road

NASA Astrophysics Data System (ADS)

Burgio, Marion; Dekeyser, Dominique; Richert, Jean Paul; Gruneisen, Pierre; Vazquez-Prada, Diego; Lacazedieu, Annie

2015-04-01

GeolVal association, www.geolval.fr , in collaboration with Geoambiente association, created a serie of pedagogical explanations about Pyrenees landscapes along the road from France to Spain, linking the towns of Pau, Oloron,Jaca and Mallos de Riglos. It was a ten years work that lasted in 2008. http://www.routetranspyreneenne.com/home_f.php We can now use this "treasure" with tourists, students and mix some landscapes explanations from a road site with a little field trip along mountain in order to "touch" the rocks. We are working about the importance of field in the way the students understand geosciences and try to organize field trips that aim to simplify and make concrete some key concepts. We also began an interactive software version of this work, presented through a pilot application, made in collaboration with Total petroleum firm.

Analysis and optimization of RC delay in vertical nanoplate FET

NASA Astrophysics Data System (ADS)

Woo, Changbeom; Ko, Kyul; Kim, Jongsu; Kim, Minsoo; Kang, Myounggon; Shin, Hyungcheol

2017-10-01

In this paper, we have analyzed short channel effects (SCEs) and RC delay with Vertical nanoplate FET (VNFET) using 3-D Technology computer-aided design (TCAD) simulation. The device is based on International Technology Road-map for Semiconductor (ITRS) 2013 recommendations, and it has initially gate length (LG) of 12.2 nm, channel thickness (Tch) of 4 nm, and spacer length (LSD) of 6 nm. To obtain improved performance by reducing RC delay, each dimension is adjusted (LG = 12.2 nm, Tch = 6 nm, LSD = 11.9 nm). It has each characteristic in this dimension (Ion/Ioff = 1.64 × 105, Subthreshold swing (S.S.) = 73 mV/dec, Drain-induced barrier lowering (DIBL) = 60 mV/V, and RC delay = 0.214 ps). Furthermore, with long shallow trench isolation (STI) length and thick insulator thickness (Ti), we can reduce RC delay from 0.214 ps to 0.163 ps. It is about a 23.8% reduction. Without decreasing drain current, there is a reduction of RC delay as reducing outer fringing capacitance (Cof). Finally, when source/drain spacer length is set to be different, we have verified RC delay to be optimum.

Occupational exposure to asphalt mixture during road paving is related to increased mitochondria DNA copy number: a cross-sectional study.

PubMed

Xu, Yiyi; Lindh, Christian H; Jönsson, Bo A G; Broberg, Karin; Albin, Maria

2018-03-27

Asphalt workers are exposed to polyaromatic hydrocarbons (PAHs) from hot mix asphalt via both inhalation and dermal absorption. The use of crumb rubber modified (CRM) asphalt may result in higher exposure to PAHs and more adverse effects. Our aim is to assess occupational exposure to PAHs from conventional and CRM asphalt paving by measuring PAH metabolites in urine, and to investigate the effects on mitochondrial DNA copy number (mtDNAcn) and telomere length. We recruited 116 workers paving conventional asphalt, 51 workers paving CRM asphalt and 100 controls in Sweden, all males. A repeated-measures analysis included 31 workers paving both types of asphalt. Urine and blood samples were collected pre-working on Monday morning and post-working on Thursday afternoon after 4 days working. PAH metabolites: 1-hydroxypyrene (1-OH-PYR) and 2-hydroxyphenanthrene (2-OH-PH) were measured in urine by LC-MS/MS. Relative mtDNAcn and telomere length were measured by quantitative PCR. Conventional and CRM asphalt workers showed higher 1-OH-PYR and 2-OH-PH than controls (p < 0.001 for all). Relative mtDNAcn were 0.21 units (p < 0.001) higher in conventional asphalt workers and 0.13 units (p = 0.010) higher in CRM asphalt workers compared to controls. Relative telomere length did not differ across occupational groups, but it was positively associated with increment of 2-OH-PH (β = 0.075, p = 0.037) in asphalt workers. The repeated-measures analysis showed no difference in either increment of 1-OH-PYP, or changes in effect biomarkers (mtDNAcn or telomere length) between paving with conventional and CRM asphalt. Increment of 2-OH-PH was smaller after paving with CRM asphalt. Road asphalt paving in open areas resulted in PAHs exposure, as shown by elevation of PAH metabolites in urine. Asphalt workers may experience oxidative stress, evidenced by alternation in mtDNAcn; however the effects could not be fully explained by exposure to PAHs from the asphalt mixture.

Study on the oasis corridor landscape in the arid regions based on RS and GIS methods--application of Jinta Oasis, China.

PubMed

Ma, Ming-guo; Wang, Xue-mei; Cheng, Guo-dong

2003-03-01

The study on the oasis corridor landsape is a new hotspot in the ecological environment research in the arid regions. In oasis, main corridor landscape types include river, ditch, shelterbelt and road. This paper introduces the basic ecological effects of the corridor landscape on the transporting mass and energy and obstructing desert landscape expansion and incursion. Using Geographic Information System (GIS), we have researched the corridor distribution and its spatial relationship with other landscape types in the Jinta Oasis. Based on the dynamically monitoring on the landscape pattern change of the Jinta Oasis during the latter 10 years by using Remote Sensing (RS) and GIS, the driving functions of the corridors on this change have been analyzed in detail. The analysis results showed that all kinds of corridors' characteristics can be quantified by the indexes such as length and width, ratio of perimeter and area, density and non-heterogeneity. The total corridor length of Jinta Oasis is 1838.5 km and its density is 2.1 km/km2. The corridor density of the irrigation land, forest and resident area is maximal, which shows that affection degree of the oasis corridors on them is the most. The improvement of the corridors quality is one of the important driving factors on the irrigation land and so on. The organic combination of the RS and GIS technologies and landscape research methods would be an effective means for the corridor landscape research on arid region oasis.

Scrolling and driving: how an MP3 player and its aftermarket controller affect driving performance and visual behavior.

PubMed

Lee, John D; Roberts, Shannon C; Hoffman, Joshua D; Angell, Linda S

2012-04-01

The aim of this study was to assess how scrolling through playlists on an MP3 player or its aftermarket controller affects driving performance and to examine how drivers adapt device use to driving demands. Drivers use increasingly complex infotainment devices that can undermine driving performance. The goal activation hypothesis suggests that drivers might fail to compensate for these demands, particularly with long tasks and large search set sizes. A total of 50 participants searched for songs in playlists of varying lengths using either an MP3 player or an aftermarket controller while negotiating road segments with traffic and construction in a medium-fidelity driving simulator. Searching through long playlists (580 songs) resulted in poor driving performance and required more long glances (longer than 2 s) to the device compared with other playlist lengths. The aftermarket controller also led to more long glances compared with the MP3 player. Drivers did not adequately adapt their behavior to roadway demand, as evident in their degraded driving performance. No significant performance differences were found between short playlists, the radio-tuning task, and the no-task condition. Selecting songs from long playlists undermined driving performance, and drivers did not sufficiently adapt their use of the device to the roadway demands, consistent with the goal activation hypothesis. The aftermarket controller degraded rather than enhanced performance. Infotainment systems should support drivers in managing distraction. Aftermarket controllers can have the unintended effect of making devices carried into the car less compatible with driving.These results can motivate development of new interfaces as alternatives to scrolling lists.

Trace metals in fugitive dust from unsurfaced roads in the Viburnum Trend resource mining District of Missouri--implementation of a direct-suspension sampling methodology.

PubMed

Witt, Emitt C; Wronkiewicz, David J; Pavlowsky, Robert T; Shi, Honglan

2013-09-01

Fugitive dust from 18 unsurfaced roadways in Missouri were sampled using a novel cyclonic fugitive dust collector that was designed to obtain suspended bulk samples for analysis. The samples were analyzed for trace metals, Fe and Al, particle sizes, and mineralogy to characterize the similarities and differences between roadways. Thirteen roads were located in the Viburnum Trend (VT) mining district, where there has been a history of contaminant metal loading of local soils; while the remaining five roads were located southwest of the VT district in a similar rural setting, but without any mining or industrial process that might contribute to trace metal enrichment. Comparison of these two groups shows that trace metal concentration is higher for dusts collected in the VT district. Lead is the dominant trace metal found in VT district dusts representing on average 79% of the total trace metal concentration, and was found moderately to strongly enriched relative to unsurfaced roads in the non-VT area. Fugitive road dust concentrations calculated for the VT area substantially exceed the 2008 Federal ambient air standard of 0.15μgm(-3) for Pb. The pattern of trace metal contamination in fugitive dust from VT district roads is similar to trace metal concentrations patterns observed for soils measured more than 40years ago indicating that Pb contamination in the region is persistent as a long-term soil contaminant. Published by Elsevier Ltd.

Magnitude and outcomes of road traffic accidents at Hospitals in Wolaita Zone, SNNPR, Ethiopia.

PubMed

Hailemichael, Feleke; Suleiman, Mohammed; Pauolos, Wondimagegn

2015-04-09

A Road traffic accident is an incident on a way or street open to public traffic, resulting in one or more persons being killed or injured, and involving at least one moving vehicle. The aim of this study is to assess magnitude and outcome of road traffic accidents among trauma victims at hospitals in Wolaita zone. A cross sectional hospital based study design using retrospective chart review was conducted from March 5th to March 25th, 2014. Simple random sampling technique was applied to identify sample population. The data was entered in to Epi info version 3.5.1 and transferred to SPSS version 16 for further analysis. A total of 384 trauma victims were incorporated in the study of which 240 (62.5%) were due to road traffic accidents. The majority of patients were male 298 (77.6%) and most commonly aged between 20-29 (35.42%). The principal outcome of injury was more commonly lower extremity (182 patients, 47.4%), compared to upper extremity (126 patients, 32.8%). Of all trauma patient presenting to hospitals (62.5%) are the result of road traffic accident. Hence, the provision of tailored messages to all members of the community regarding knowledge and practices of road safety measures like appropriate use of pavements by pedestrians and avoiding risky driving behaviors. Besides this make use of compulsory motorcycle helmets would appear to be a very important intervention.

Survival, neurological recovery and morbidity after spinal cord injuries following road accidents in Israel.

PubMed

Tchvaloon, E; Front, L; Gelernter, I; Ronen, J; Bluvshtein, V; Catz, A

2008-02-01

A retrospective cohort study. Assess outcomes in patients with spinal cord injuries (SCI) following road accidents, and factors that affect them. Loewenstein Rehabilitation Hospital, Raanana, Israel. A total of 143 patients admitted for rehabilitation between 1962 and 2004. Survival rates were estimated using the product limit (Kaplan-Meyer) method and their association with risk factors was analyzed with the Cox model. Neurological recovery was determined by comparing the Frankel grade at admission to rehabilitation and at discharge. The relation between recovery and various factors was tested with logistic regression. The risk of SCI in road accidents is higher among car drivers and motorcycle or bicycle riders. Median survival was 43 years. Survival was negatively associated with age at injury (P<0.0002) and with diagnosis of pressure sores (P=0.0065). Recovery of at least one Frankel grade occurred in 29.1% of patients. Useful recovery (upgrade to Frankel grade D or E) occurred in 23.1% of all patients. Neurological recovery was negatively associated with the severity of neurological deficit (P<0.001) and with thoracic injuries (P=0.046). The most common complications were pressure sores and those of the urinary and respiratory systems. In SCI following road accidents, survival rates were higher and recovery rates lower than in mixed types of trauma. This may be related to better compensation followed by better nursing for road accident victims in Israel, which may prevent life-shortening complications, and to more severe injuries caused by road accidents.

Effects of road dust on the growth characteristics of Sophora japonica L. seedlings.

PubMed

Bao, Le; Qu, Laiye; Ma, Keming; Lin, Lin

2016-08-01

Road dust is one of the most common pollutants and causes a series of negative effects on plant physiology. Dust's impacts on plants can be regarded as a combination of load, composition and grain size impacts on plants; however, there is a lack of integrated dust effect studies involving these three aspects. In our study, Sophora japonica seedlings were artificially dusted with road dust collected from the road surface of Beijing so that we could study the impacts of this dust on nitrogen/carbon allocation, biomass allocation and photosynthetic pigments from the three aspects of composition, load and grain size. The results showed that the growth characteristics of S. japonica seedlings were mostly influenced by dust composition and load. Leaf N, root-shoot ratio and chlorophyll a/b were significantly affected by dust composition and load; leaf C/N, shoot biomass, total chlorophyll and carotenoid were significantly affected by dust load; stem N and stem C/N were significantly affected by dust composition; while the dust grain size alone did not affect any of the growth characteristics. Road dust did influence the growth characteristics more extensively than loam. Therefore, a higher dust load could increase the differences between road dust and loam treatments. The elements in dust are well correlated to the shoot N, shoot C/N, and root-shoot ratio of S. japonica seedlings. This knowledge could benefit the management of urban green spaces. Copyright © 2016. Published by Elsevier B.V.

[Spatial analysis of road traffic accidents with fatalities in Spain, 2008-2011].

PubMed

Gómez-Barroso, Diana; López-Cuadrado, Teresa; Llácer, Alicia; Palmera Suárez, Rocío; Fernández-Cuenca, Rafael

2015-09-01

To estimate the areas of greatest density of road traffic accidents with fatalities at 24 hours per km(2)/year in Spain from 2008 to 2011, using a geographic information system. Accidents were geocodified using the road and kilometer points where they occurred. The average nearest neighbor was calculated to detect possible clusters and to obtain the bandwidth for kernel density estimation. A total of 4775 accidents were analyzed, of which 73.3% occurred on conventional roads. The estimated average distance between accidents was 1,242 meters, and the average expected distance was 10,738 meters. The nearest neighbor index was 0.11, indicating that there were aggregations of accidents in space. A map showing the kernel density was obtained with a resolution of 1 km(2), which identified the areas of highest density. This methodology allowed a better approximation to locating accident risks by taking into account kilometer points. The map shows areas where there was a greater density of accidents. This could be an advantage in decision-making by the relevant authorities. Copyright © 2014 SESPAS. Published by Elsevier Espana. All rights reserved.

IMPROVEMENT OF EFFICIENCY OF CUT AND OVERLAY ASPHALT WORKS BY USING MOBILE MAPPING SYSTEM

NASA Astrophysics Data System (ADS)

Yabuki, Nobuyoshi; Nakaniwa, Kazuhide; Kidera, Hiroki; Nishi, Daisuke

When the cut-and-overlay asphalt work is done for improving road pavement, conventional road surface elevation survey with levels often requires traffic regulation and takes much time and effort. Recently, although new surveying methods using non-prismatic total stations or fixed 3D laser scanners have been proposed in industry, they have not been adopted much due to their high cost. In this research, we propose a new method using Mobile Mapping Systems (MMS) in order to increase the efficiency and to reduce the cost. In this method, small white marks are painted at the intervals of 10m along the road to identify cross sections and to modify the elevations of the white marks with accurate survey data. To verify this proposed method, we executed an experiment and compared this method with the conventional level survey method and the fixed 3D laser scanning method at a road of Osaka University. The result showed that the proposed method had a similar accuracy with other methods and it was more efficient.

Quantification of sweat gland volume and innervation in neuropathy: Correlation with thermoregulatory sweat testing.

PubMed

Loavenbruck, Adam; Wendelschaefer-Crabbe, Gwen; Sandroni, Paola; Kennedy, William R

2014-10-01

No study has correlated thermoregulatory sweat testing (TST) with histopathologic study of sweat glands (SGs) and SG nerve fibers (SGNFs). We studied 10 neuropathy patients in whom anhidrosis was found by TST and 10 matched controls. Skin biopsies were taken from both anhidrotic and sweating skin and immunohistochemical staining was done for nerves and basement membrane. For each biopsy, total tissue volume, total SG volume, and total SGNF length were measured. SGNF length per biopsy volume, SG volume per biopsy volume (SG%), and SGNF length per SG volume were calculated. SGNF length per biopsy volume was reduced in anhidrotic site biopsies of patients compared with controls. SG% was decreased and SGNF length per SG volume increased in patients compared with controls. The results suggest a concomitant loss of SG volume and SGNF length in neuropathy, with greater loss of SGNFs in anhidrotic skin, possibly exceeding collateral reinnervation. Copyright © 2014 Wiley Periodicals, Inc.

[Nitrogen and phosphorus composition in urban runoff from the new development area in Beijing].

PubMed

Li, Li-Qing; Lü, Shu-Cong; Zhu, Ren-Xiao; Liu, Ze-Quan; Shan, Bao-Qing

2012-11-01

Stormwater runoff samples were collected from two impervious roof and road of the new development area in Beijing, during three rainfall events in an attempt to characterize the urban runoff and determine nitrogen and phosphorus composition. The outcomes are expected to offer the practical guidance in sources control of urban runoff pollution. The results indicated that the stormwater runoff from the studied area presented a strong first flush for all monitored events and constituents. Eighty percent of the total pollutant loads were transported by the first 10 mm flow volume for roof runoff, whereas 80% of the total pollutant loads were discharged by the first 15 mm flow volume for road runoff. Average EMCs of TSS, COD, TN, NH4(+) -N, NO3(-) -N and TP for roof runoff were 50.2 mg x L(-1), 81.7 mg x L(-1), 6.07 mg x L(-1), 2.94 mg x L(-1), 1.05 mg x L(-1), and 0.11 mg x L(-1), respectively. Average EMCs of TSS, COD, TN, NH4(+) -N, NO3(-)-N and TP for road runoff were 539.0 mg x L(-1), 276.4 mg x L(-1), 7.00 mg x L(-1), 1.71 mg x L(-1), 1.51 mg x L(-1), and 0.61 mg x L(-1), respectively. Moreover, for the roof runoff, the particle-bound fraction was 20.8% for COD, 12.3% for TN, and 49.7% for TP. For road runoff, the particle-bound fraction was 68.6% for COD, 20.0% for TN, and 73.6% for TP. Nitrogen in roof runoff was predominantly dissolved (87.7%), with ammonia (57.6%) and nitrate (22.5%). Nitrogen in road runoff was also predominantly dissolved (80.0%), with ammonia (42.1%) and nitrate (35.0%). These findings can assist the development of effective source control strategies to immobilize dissolved and particulate-bound nitrogen/phosphorus in urban stormwater.

Random parameter models of interstate crash frequencies by severity, number of vehicles involved, collision and location type.

PubMed

Venkataraman, Narayan; Ulfarsson, Gudmundur F; Shankar, Venky N

2013-10-01

A nine-year (1999-2007) continuous panel of crash histories on interstates in Washington State, USA, was used to estimate random parameter negative binomial (RPNB) models for various aggregations of crashes. A total of 21 different models were assessed in terms of four ways to aggregate crashes, by: (a) severity, (b) number of vehicles involved, (c) crash type, and by (d) location characteristics. The models within these aggregations include specifications for all severities (property damage only, possible injury, evident injury, disabling injury, and fatality), number of vehicles involved (one-vehicle to five-or-more-vehicle), crash type (sideswipe, same direction, overturn, head-on, fixed object, rear-end, and other), and location types (urban interchange, rural interchange, urban non-interchange, rural non-interchange). A total of 1153 directional road segments comprising of the seven Washington State interstates were analyzed, yielding statistical models of crash frequency based on 10,377 observations. These results suggest that in general there was a significant improvement in log-likelihood when using RPNB compared to a fixed parameter negative binomial baseline model. Heterogeneity effects are most noticeable for lighting type, road curvature, and traffic volume (ADT). Median lighting or right-side lighting are linked to increased crash frequencies in many models for more than half of the road segments compared to both-sides lighting. Both-sides lighting thereby appears to generally lead to a safety improvement. Traffic volume has a random parameter but the effect is always toward increasing crash frequencies as expected. However that the effect is random shows that the effect of traffic volume on crash frequency is complex and varies by road segment. The number of lanes has a random parameter effect only in the interchange type models. The results show that road segment-specific insights into crash frequency occurrence can lead to improved design policy and project prioritization. Copyright © 2013 Elsevier Ltd. All rights reserved.

The effects of congestions tax on air quality and health

NASA Astrophysics Data System (ADS)

Johansson, Christer; Burman, Lars; Forsberg, Bertil

The "Stockholm Trial" involved a road pricing system to improve the air quality and reduce traffic congestion. The test period of the trial was January 3-July 31, 2006. Vehicles travelling into and out of the charge cordon were charged for every passage during weekdays. The amount due varied during the day and was highest during rush hours (20 SEK = 2.2 EUR, maximum 60 SEK per day). Based on measured and modelled changes in road traffic it was estimated that this system resulted in a 15% reduction in total road use within the charged cordon. Total traffic emissions in this area of NO x and PM10 fell by 8.5% and 13%, respectively. Air quality dispersion modelling was applied to assess the effect of the emission reductions on ambient concentrations and population exposure. For the situations with and without the trial, meteorological conditions and other emissions than from road traffic were kept the same. The calculations show that, with a permanent congestion tax system like the Stockholm Trial, the annual average NO x concentrations would be lower by up to 12% along the most densely trafficked streets. PM10 concentrations would be up to 7% lower. The limit values for both PM10 and NO 2 would still be exceeded along the most densely trafficked streets. The total population exposure of NO x in Greater Stockholm (35 × 35 km with 1.44 million people) is estimated to decrease with a rather modest 0.23 μg m -3. However, based on a long-term epidemiological study, that found an increased mortality risk of 8% per 10 μg m -3 NO x, it is estimated that 27 premature deaths would be avoided every year. According to life-table analysis this would correspond to 206 years of life gained over 10 years per 100 000 people following the trial if the effects on exposures would persist. The effect on mortality is attributed to road traffic emissions (likely vehicle exhaust particles); NO x is merely regarded as an indicator of traffic exposure. This is only the tip of the ice-berg since reductions are expected in both respiratory and cardiovascular morbidity. This study demonstrates the importance of not only assessing the effects on air quality limit values, but also to make quantitative estimates of health impacts, in order to justify actions to reduce air pollution.

Taxi driver speeding: Who, when, where and how? A comparative study between Shanghai and New York City.

PubMed

Huang, Yizhe; Sun, Daniel Jian; Tang, Juanyu

2018-04-03

The 3 objectives of this study are to (1) identify the driving style characteristics of taxi drivers in Shanghai and New York City (NYC) using taxi Global Positioning System (GPS) data and make a comparative analysis; (2) explore the influence of different driving style characteristics on the frequency of speeding (who and how?) and (3) explore the influence of driving style characteristics, road attributes, and environmental factors on the speeding rate (when, where, and how?) Methods: This study proposes a driver-road-environment identification (DREI) method to investigate the determinant factors of taxi speeding violations. Driving style characteristics, together with road and environment variables, were obtained based on the GPS data and auxiliary spatiotemporal data in Shanghai and NYC. The daily working hours of taxi drivers in Shanghai (18.6 h) was far more than in NYC (8.5 h). The average occupancy speed of taxi drivers in Shanghai (21.3 km/h) was similar to that of NYC (20.3 km/h). Speeders in both cities had shorter working hours and longer daily driving distance than other taxi drivers, though their daily income was similar. Speeding drivers routinely took long-distance trips (>10 km) and preferred relatively faster routes. Length of segments (1.0-1.5 km) and good traffic condition were associated with high speeding rates, whereas central business district area and secondary road were associated with low speeding rates. Moreover, many speeding violations were identified between 4:00 a.m. and 7:00 a.m. in both Shanghai and NYC and the worst period was between 5:00 a.m. and 6:00 a.m. in both cities. Characteristics of drivers, road attributes, and environment variables should be considered together when studying driver speeding behavior. Findings of this study may assist in stipulating relevant laws and regulations such as stricter offense monitoring in the early morning, long segment supervision, shift rule regulation, and working hour restriction to mitigate the risk of potential crashes.

Polybrominated diphenyl ethers (PBDEs) and heavy metals in road dusts from a plastic waste recycling area in north China: implications for human health.

PubMed

Tang, Zhenwu; Huang, Qifei; Yang, Yufei; Nie, Zhiqiang; Cheng, Jiali; Yang, Jun; Wang, Yuwen; Chai, Miao

2016-01-01

Road dusts were collected from an area where intense mechanical recycling of plastic wastes occurs in Wen'an, north China. These dusts were investigated for polybrominated diphenyl ethers (PBDEs) and heavy metals contamination to assess the health risk related to these components. Decabromodiphenyl ether (BDE-209) and Σ21PBDE concentrations in these dusts ranged from 2.67 to 10,424 ng g(-1) and from 3.23 to 10,640 ng g(-1), respectively. These PBDE concentrations were comparable to those observed in road dust from e-waste recycling areas but were 1-2 orders of magnitude higher than concentrations in outdoor or road dusts from other areas. This indicates that road dusts in the study area have high levels of PBDE pollution. BDE-209 was the predominant congener, accounting for 86.3% of the total PBDE content in dusts. Thus, commercial deca-BDE products were the dominant source. The average concentrations of As, Cd, Cr, Cu, Hg, Pb, Sb, and Zn in these same dust samples were 10.1, 0.495, 112, 54.7, 0.150, 71.8, 10.6, and 186 mg kg(-1), respectively. The geoaccumulation index suggests that road dusts in this area are moderately to heavily polluted with Cd, Hg, and Sb. This study shows that plastic waste processing is a major source of toxic pollutants in road dusts in this area. Although the health risk from exposure to dust PBDEs was low, levels of some heavy metals in this dust exceeded acceptable risk levels for children and are of great concern.

Morbidity and mortality among road users in Benin-City, Nigeria.

PubMed

Nzegwu, M A; Banjo, A A F; Akhiwu, W; Aligbe, J U; Nzegwu, C O

2008-09-01

Murray and Krug had reported that road traffic injuries are a major cause of death globally, with disproportionate number occurring in developing counties. Seventy out of 308 deaths that occurred in Benin City from August 2002-July 2003, representing 22.7% of all deaths was due to road traffic injuries. Despite this observation, there is a paucity of data on road traffic morbidity and mortality. The aim of this study was to evaluate patterns of morbidity and mortality among drivers and passengers of cars involved in road traffic accidents in Benin-City Nigeria from August 2002-July 2003 as a base line data. Eighty-seven car drivers and passengers who were studied were part of a larger study, involved in a road traffic accident and brought to the accident and emergency units of either the University of Benin Teaching Hospital or the State Specialist Hospital between August 2002-July 2003.The injured ones were examined and dead patients had autopsy done on them. Over all, out of 283 total accidents cases reviewed in the period of study 87 were car occupants representing 30.7% of all accident cases, and 67 patients (23.7%) sustained varying injuries, while 20 patients (7.1%) died. Commercial cars were involved in majority of cases 85%. Males were also more in number. Intracranial hemorrhage was the predominant cause of death. Occupants of cars accounted for the singular most common category of morbidity and mortality among all road users. The male to female ratio was 2.1:1. Windscreen injuries most commonly associated with facial and head injuries represented the commonest cause of morbidity and mortality. The commonest autopsy finding as cause of death was intra-cranial hemorrhage.

A bibliometric analysis of the published road traffic injuries research in India, post-1990.

PubMed

Sharma, Neeraj; Bairwa, Mohan; Gowthamghosh, B; Gupta, S D; Mangal, D K

2018-03-01

Globally, road traffic injuries are the leading cause of death among those aged 15-29 years. However, road traffic injury research has not received adequate attention from the scientific community in low- and middle-income countries, including India. The present study aims to provide a bibliometric overview of research assessing road traffic injuries in India. We used Scopus to extract relevant research in road traffic injuries published from 1991 to 2017. This study presented the key bibliometric indicators such as trends of annual publications and citations, top 10 authors, journals, institutions and highly cited articles, citation analysis of articles, co-occurrence of keywords, etc. Analysis was performed using Scopus, Microsoft Excel, and VOS-viewer. A total of 242 articles were retrieved with an h-index of 18, excluding self-citations. A steadfast growth of publications was documented in last decade, especially after the year 2010. The h-index of the top 10 authors, institutions, journals and highly cited articles did not surpass single digits. A network visualisation map showed that 'traffic accident', 'male', 'adolescent' and 'child' were the most commonly encountered key terms. The prominent authors were Gururaj G, Dandona R, and Hyder AA, whereas the top journals were the Indian Journal of Forensic Medicine and Toxicology, Medico Legal Update, and the International Journal of Applied Engineering Research and top institutions were the All India Institute of Medical Sciences, New Delhi, the Indian Institute of Technology, Delhi, and the Administrative Staff College of India. In India, road traffic injuries research is inadequate in quantity and quality, warranting greater attention from researchers and policy planners to address the burden of road traffic injuries.

Concentrations and bioaccessibility of metals in vegetation and dust near a mining haul road, Cape Krusenstern National Monument, Alaska

USGS Publications Warehouse

Brumbaugh, William G.; Morman, Suzette A.; May, Thomas W.

2011-01-01

Vegetation, sub-surface peat, and road dust were sampled near the Delong Mountain Transportation System (DMTS) haul road in northwest Alaska in 2005-2006 to document aluminum, barium, cadmium, lead, and zinc concentrations, and to evaluate bioaccessibility of these metals. The DMTS haul road is the transport corridor between Red Dog Mine (a large-scale, lead-zinc mine and mill) and the coastal shipping port, and it traverses National Park Service lands. Compared to reference locations, total metal concentrations in four types of vegetation (birch, cranberry, and willow leaves, and cotton grass blades/stalks) collected 25 m from the haul road were enriched on average by factors of 3.5 for zinc, 8.0 for barium, 20 for cadmium, and 150 for lead. Triple rinsing of vegetation with a water/methanol mixture reduced metals concentrations by at most 50%, and cadmium and zinc concentrations were least affected by rinsing. Cadmium and zinc bioaccessibility was greater in vegetation (50% to 100%) than in dust (15% to 20%); whereas the opposite pattern was observed for lead bioaccessibility (<30% in vegetation; 50% in dust). Barium exhibited low-to-intermediate bioaccessibility in dust and vegetation (20% to 40%), whereas aluminum bioaccessibility was relatively low (<6%) in all sample types. Our reconnaissance-level study indicates that clean-up and improvements in lead/zinc concentrate transfer activities have been effective; however, as of 2006, metal dispersion from past and/or present releases of fugitive dusts along the DMTS road still may have been contributing to elevated metals in surface vegetation. Vegetation was most enriched in lead, but because bioaccessibility of cadmium was greater, any potential risks to animals that forage near the haul road might be equally important for both of these metals.

The effects of session length on demand functions generated using FR schedules.

PubMed

Foster, T Mary; Kinloch, Jennifer; Poling, Alan

2011-05-01

In comparing open and closed economies, researchers often arrange shorter sessions under the former condition than under the latter. Several studies indicate that session length per se can affect performance and there are some data that indicate that this variable can influence demand functions. To provide further data, the present study exposed domestic hens to series of increasing fixed-ratio schedules with the length of the open-economy sessions varied over 10, 40, 60, and 120 min. Session time affected the total-session response rates and pause lengths. The shortest session gave the greatest response rates and shortest pauses and the longest gave the lowest response rates and longest pauses. The total-session demand functions also changed with session length: The shortest session gave steeper initial slopes (i.e., the functions were more elastic at small ratios) and smaller rates of change of elasticity than the longest session. Response rates, pauses, and demand functions were, however, similar for equivalent periods of responding taken from within sessions of different overall lengths (e.g., total-session data for 10-min sessions and the data for the first 10 min of 120-min sessions). These findings suggest that differences in session length can confound the results of studies comparing open and closed economies when those economies are arranged in sessions that differ substantially in length, hence data for equivalent-length periods of responding, rather than total-session data, should be of primary interest under these conditions.

Do Variants in GSTs Modify the Association between Traffic Air Pollution and Asthma in Adolescence?

PubMed Central

Bowatte, Gayan; Lodge, Caroline J.; Lowe, Adrian J.; Erbas, Bircan; Dennekamp, Martine; Marks, Guy B.; Perret, Jennifer; Hui, Jennie; Wjst, Matthias; Gurrin, Lyle C.; Allen, Katrina J.; Abramson, Michael J.; Matheson, Melanie C.; Dharmage, Shyamali C.

2016-01-01

Polymorphisms in genes involved in the oxidative stress response may partially explain the documented heterogeneous associations between traffic-related air pollution (TRAP) exposure and asthma and allergies in children. We investigated whether the GSTT1, GSTM1 and GSTP1 gene polymorphisms modified the associations between TRAP exposure during the first year of life and asthma, wheeze and hay fever in adolescence. We used a birth cohort of 620 high risk infants from the Melbourne Atopy Cohort Study. TRAP exposure during the first year of life was defined as the cumulative length of major roads within 150 m of each participant’s residence during the first year of life. Wheeze, asthma and hay fever were measured at ages 12 (n = 370) and 18 (n = 434) years. The associations and interactions with glutathione S-transferases (GST s) were investigated using regression models. Overall, there was no relationship between TRAP exposure during the first year of life and current asthma, wheeze and hay fever at ages 12 or 18 years. However, in GSTT1 null carriers, every 100 m increase in cumulative lengths of major road exposure during the first year of life was associated with a 2.31-fold increased risk of wheeze and a 2.15-fold increased risk of asthma at 12 years. TRAP is associated with some respiratory outcomes in carriers of genetic polymorphisms in oxidative stress metabolism genes. PMID:27043549

Prediction of an Apparent Flame Length in a Co-Axial Jet Diffusion Flame Combustor.

DTIC Science & Technology

1983-04-01

This report is comprised of two parts. In Part I a predictive model for an apparent flame length in a co-axial jet diffusion flame combustor is...Overall mass transfer coefficient, evaluated from an empirically developed correlation, is employed to predict total flame length . Comparison of the...experimental and predicted data on total flame length shows a reasonable agreement within sixteen percent over the investigated air and fuel flow rate

A comparative study of health risk of potentially toxic metals in urban and suburban road dust in the most populated city of China

NASA Astrophysics Data System (ADS)

Shi, Guitao; Chen, Zhenlou; Bi, Chunjuan; Wang, Li; Teng, Jiyan; Li, Yuansheng; Xu, Shiyuan

2011-01-01

Urban and suburban road dust samples were collected in the most populated city of China, Shanghai. Size fractions of dust particles were analyzed; metal levels of the dust were also measured. Human exposure to individual toxic metals through road dust was assessed for both children and adults. The results showed that dust particles from urban and suburban road were presented similar size distribution pattern, with most particles in the range of 100-400 μm. Urban road dust consisted of higher proportions of inhalable, thoracic and respirable particles with increased risk of adverse effects to human. In general, mean grain sizes of urban road dust were smaller than suburban dust. Total organic carbon contents and levels of Pb, Cd, Cu, Zn, Ni, Cr in urban dust were higher than those of suburban dust. But the concentrations of As and Hg from suburban dust were higher, indicting a different main source. The exposure pathway which resulted in the highest level of risk for human exposed to road dust was ingestion of this material, which was followed by dermal contact. Except for some locations, risk values of both cancer and non-cancer obtained in this study were in the receivable range on the whole. Children had greater health risks than adults. The overall risks of non-cancer in urban area were higher than those in suburban area, but the values of cancer in the two areas were comparable. As for the aggregate noncarcinogenic risk, Pb was of most concern regarding the potential occurrence of health impacts. Of the three carcinogenic metals As, Cr and Cd, the only mean risk higher than 10 -6 was Cr, accounting for a great percentage (95%) of the overall risk of cancer. Hence, potentially adverse health effects arising from Pb and Cr in road dust should arouse wide concern.

Estimating emissions from the Indian transport sector with on-road fleet composition and traffic volume

NASA Astrophysics Data System (ADS)

Pandey, Apoorva; Venkataraman, Chandra

2014-12-01

Urbanization and rising household incomes in India have led to growing transport demand, particularly during 1990-2010. Emissions from transportation have been implicated in air quality and climate effects. In this work, emissions of particulate matter (PM2.5 or mass concentration of particles smaller than 2.5 um diameter), black carbon (BC) and organic carbon (OC), were estimated from the transport sector in India, using detailed technology divisions and regionally measured emission factors. Modes of transport addressed in this work include road transport, railways, shipping and aviation, but exclude off-road equipment like diesel machinery and tractors. For road transport, a vehicle fleet model was used, with parameters derived from vehicle sales, registration data, and surveyed age-profile. The fraction of extremely high emitting vehicles, or superemitters, which is highly uncertain, was assumed as 20%. Annual vehicle utilization estimates were based on regional surveys and user population. For railways, shipping and aviation, a top-down approach was applied, using nationally reported fuel consumption. Fuel use and emissions from on-road vehicles were disaggregated at the state level, with separate estimates for 30 cities in India. The on-road fleet was dominated by two-wheelers, followed by four-and three-wheelers, with new vehicles comprising the majority of the fleet for each vehicle type. A total of 276 (-156, 270) Gg/y PM2.5, 144 (-99, 207) Gg/y BC, and 95 (-64, 130) Gg/y OC emissions were estimated, with over 97% contribution from on-road transport. Largest emitters were identified as heavy duty diesel vehicles for PM2.5 and BC, but two-stroke vehicles and superemitters for OC. Old vehicles (pre-2005) contributed significantly more (∼70%) emissions, while their share in the vehicle fleet was smaller (∼45%). Emission estimates were sensitive to assumed superemitter fraction. Improvement of emission estimates requires on-road emission factor measurements for all vehicle types and a better understanding of vehicle utilization and superemitter fraction.

Major tire fragment contributions to PM{sub 10} non-attainment in Anchorage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Draftz, R.G.; Cowherd, C. Jr.; Grelinger, M.A.

1999-07-01

Anchorage exceeded the 24-hour National Ambient Air Quality Standard for PM{sub 10} a total of thirty-one times in the period from 1987 to 1997. About half of these exceedances were due to natural events. The remaining exceedances could not be linked to natural events. Moreover, these exceedances occurred predominantly at one PM{sub 10} site near one of the major thoroughfares in Anchorage. The apportionment of sources producing these unexplained violations was one of the major goals of a 1996--98 study sponsored and directed by the Air Quality Program of the Municipality of Anchorage. Two suites of PM{sub 10} samples weremore » utilized for source apportionment of exceedances. The first consisted of historical samples selected from sampling periods unaffected by natural events. These samples were carefully selected to avoid the high values during and following volcanic eruptions when there were likely to be considerable accumulations of volcanic ejecta on roads. Dust storms were excluded by simple inspection of data for days that showed that all sites in the Anchorage basin had high PM{sub 10} loadings. The second group of samples were selected from a special springtime road dust tagging experiment used to measure emission and depletion rates of the taggant and accumulated road dust particles, mainly road aggregate wear and anti-skid minerals. Quantitative microscopical analysis of the first suite of historical samples showed that rubber tire concentrations contributed from approximately 12 to 42{micro}g/m{sup 3} of the PM{sub 10} for samples near or exceeding the 24 hour limit. Road dust samples from the road tagging experiment showed that the PM{sub 10}-sized tire fragments were not present in the road dust and therefore, had to have become immediately airborne rather than re-entrained from road dust deposits. Rubber tire fragments are one of the three dominant components that collectively account for more than 95% of the PM{sub 10} non-attainment in Anchorage.« less

Influence of Road Proximity on the Concentrations of Heavy Metals in Korean Urban Agricultural Soils and Crops.

PubMed

Kim, Hyuck Soo; Kim, Kwon-Rae; Kim, Won-Il; Owens, Gary; Kim, Kye-Hoon

2017-02-01

The urban agricultural (UA) environment near active roadways can be degraded by traffic-related particles (i.e., exhaust gases and road dust), which may contain heavy metals. The current study investigated changes in heavy-metal [cadmium (Cd), copper (Cu), chromium (Cr) nickel (Ni), lead (Pb) and zinc (Zn)] concentrations in soils located near highly trafficked roads in Korea and the subsequent uptake of these metals by Chinese cabbage. Heavy-metal plant concentrations were determined in both washed and unwashed plant leaves to determine whether foliar deposition played any role in plant metal uptake. Soil concentrations of Cd, Cu, Pb, and Zn were all lower than the Korean standard soil limits and showed no significant influence from road traffic. In contrast, both Ni and Cr concentrations in soils collected within 10 m of the road were 4 and 5 times greater, respectively, than those in soils collected 70 m from the road. Heavy-metal concentrations in unwashed Chinese cabbage leaf collected at 5 m from the road were consistently greater than those of washed leaf samples, thus indicating the deposition of traffic-related particles on the plant surface. With the exception of Cu, all heavy-metal concentration in washed plant samples collected at 5 m also showed greater accumulation compared with samples collected further away. This was mainly attributed to increased total soil heavy-metal concentrations and increased metal phytoavailability induced by decreases in soil pH near the road. However, overall heavy-metal soil concentrations were well lower than the allowable concentrations, and the levels observed in plants collected in this study were considered not to currently pose a significant risk to human health. However, some traffic-related heavy metals, in particular Cr and Ni, were being accumulated in the roadside UA environment, which may warrant some caution regarding the environment and/or health issues in the future.

Building Development and Roads: Implications for the Distribution of Stone Curlews across the Brecks

PubMed Central

Clarke, Ralph T.; Liley, Durwyn; Sharp, Joanna M.; Green, Rhys E.

2013-01-01

Background Substantial new housing and infrastructure development planned within England has the potential to conflict with the nature conservation interests of protected sites. The Breckland area of eastern England (the Brecks) is designated as a Special Protection Area for a number of bird species, including the stone curlew (for which it holds more than 60% of the UK total population). We explore the effect of buildings and roads on the spatial distribution of stone curlew nests across the Brecks in order to inform strategic development plans to avoid adverse effects on such European protected sites. Methodology Using data across all years (and subsets of years) over the period 1988-2006 but restricted to habitat areas of arable land with suitable soils, we assessed nest density in relation to the distances to nearest settlements and to major roads. Measures of the local density of nearby buildings, roads and traffic levels were assessed using normal kernel distance-weighting functions. Quasi-Poisson generalised linear mixed models allowing for spatial auto-correlation were fitted. Results Significantly lower densities of stone curlew nests were found at distances up to 1500m from settlements, and distances up to 1000m or more from major (trunk) roads. The best fitting models involved optimally distance-weighted variables for the extent of nearby buildings and the trunk road traffic levels. Significance The results and predictions from this study of past data suggests there is cause for concern that future housing development and associated road infrastructure within the Breckland area could have negative impacts on the nesting stone curlew population. Given the strict legal protection afforded to the SPA the planning and conservation bodies have subsequently agreed precautionary restrictions on building development within the distances identified and used the modelling predictions to agree mitigation measures for proposed trunk road developments. PMID:24023662

Regional transportation network blocked by snowdrifts: assessment of risk reduction strategies by the example of the wind event of February 2015 in the Canton of Vaud, Switzerland

NASA Astrophysics Data System (ADS)

Voumard, Jérémie; Jaboyedoff, Michel; Derron, Marc-Henri

2016-04-01

The 5-8th February, a meteorological situation characterized by a strong wind coming from the North generated many snowdrifts on roads and railways in the Canton of Vaud, Switzerland. The affected region, about 900 km2, is located on the Swiss Plateau. More than thirty roads and few railways were blocked during the event. On some areas, too many roads and railways tracks were closed to assure the school transports making obligatory the total closure of seven schools and the partial closure of three schools affecting 8'000 students, which is almost 10% of students of the Canton of Vaud. Over hundred vehicles blocked in the snowdrifts had to be unobstructed. Over 150 snowplows drivers were requisitioned but the wind with gusts of over 80 km/h was too strong to release the roads from the snow accumulation. The boat transport on the Lake Geneva was interrupted during three days because of the danger generated by the strong wind during the berths. This interruption generated up to 100 km deviation for commuting traffic. The county police recommended to the population to limit their travels on the road. The last roads closures due to snowdrifts in the Canton of Vaud occurred ten years ago, in 2005. This particular event that affected considerably the accessibility of a large area of the Canton of Vaud is interesting because results of a "simple" meteorological situation that strongly reduced the accessibility during four days of an area with a population of about 340'000. It raises several questions as for examples: how the emergency services accessibility is assured; what are the tools that can reduce the roads closures; what is the best road management to follow during such an event (which roads must be priority cleaned, which roads can be left covered by snow); how to prevent such an event, are snow fences enough to avoid snowdrifts or is there another way to limit their creation? To try obtaining answers to those questions, we assess the most critical infrastructures where an accessibility is crucial to be maintained. We analyze then the road network to highlight the roads vulnerability from snowdrifts with topographic and meteorological indicators. We also assess the ratio cost/benefit of different measures limiting snowdrifts. We finally discuss strategies to reduce the risk of this winter meteorological event.

Hydrostratigraphic interpretation of test-hole and geophysical data, Upper Loup River Basin, Nebraska, 2008-10

USGS Publications Warehouse

Hobza, Christopher M.; Asch, Theodore H.; Bedrosian, Paul A.

2011-01-01

Test-hole drilling has indicated greater variation in the base-of-aquifer elevation in the western part of the upper Loup study area than in the eastern part reflecting a number of deep paleovalleys incised into the Brule Formation of the White River Group. TDEM measurements within the upper Loup study area were shown to be effective as virtual boreholes in mapping out the base of the aquifer. TDEM estimates of the base of aquifer were in good accordance with existing test-hole data and were able to improve the interpreted elevation and topology of the base of the aquifer. In 2010, AMT data were collected along a profile, approximately 12 miles (19 kilometers) in length, along Whitman Road, in Grant and Cherry Counties. The AMT results along Whitman Road indicated substantial variability in the elevation of the base of the High Plains aquifer and in the distribution of highly permeable zones within the aquifer.

V-Alert: Description and Validation of a Vulnerable Road User Alert System in the Framework of a Smart City.

PubMed

Hernandez-Jayo, Unai; De-la-Iglesia, Idoia; Perez, Jagoba

2015-07-29

V-Alert is a cooperative application to be deployed in the frame of Smart Cities with the aim of reducing the probability of accidents involving Vulnerable Road Users (VRU) and vehicles. The architecture of V-Alert combines short- and long-range communication technologies in order to provide more time to the drivers and VRU to take the appropriate maneuver and avoid a possible collision. The information generated by mobile sensors (vehicles and cyclists) is sent over this heterogeneous communication architecture and processed in a central server, the Drivers Cloud, which is in charge of generating the messages that are shown on the drivers' and cyclists' Human Machine Interface (HMI). First of all, V-Alert has been tested in a simulated scenario to check the communications architecture in a complex scenario and, once it was validated, all the elements of V-Alert have been moved to a real scenario to check the application reliability. All the results are shown along the length of this paper.

Implications of uncertainty on regional CO2 mitigation policies for the U.S. onroad sector based on a high-resolution emissions estimate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mendoza, D.; Gurney, Kevin R.; Geethakumar, Sarath

2013-04-01

In this study we present onroad fossil fuel CO2 emissions estimated by the Vulcan Project, an effort quantifying fossil fuel CO2 emissions for the U.S. in high spatial and temporal resolution. This high-resolution data, aggregated at the state-level and classified in broad road and vehicle type categories, is compared to a commonly used national-average approach. We find that the use of national averages incurs state-level biases for road groupings that are almost twice as large as for vehicle groupings. The uncertainty for all groups exceeds the bias, and both quantities are positively correlated with total state emissions. States with themore » largest emissions totals are typically similar to one another in terms of emissions fraction distribution across road and vehicle groups, while smaller-emitting states have a wider range of variation in all groups. Errors in reduction estimates as large as ±60% corresponding to ±0.2 MtC are found for a national-average emissions mitigation strategy focused on a 10% emissions reduction from a single vehicle class, such as passenger gas vehicles or heavy diesel trucks. Recommendations are made for reducing CO2 emissions uncertainty by addressing its main drivers: VMT and fuel efficiency uncertainty.« less

Aquaculture research and management in the telecoupled Belt and Road Initiative countries and beyond

NASA Astrophysics Data System (ADS)

Yang, W.; Ying, Z.; Marín, T.

2017-12-01

Due to the continuous growth in aquatic product consumption, globally the total production of aquatic products has increased by 20% in the past two decades. In 2014, for the first time, the production of aquatic products for direct human consumption from aquaculture surpassed that of wild catch. In 2016, the total production of global aquatic products reached 170 million tons, of which 45% comes from the aquaculture sector. More importantly, over 80% of the global aquaculture production occurs in the Belt and Road Initiative countries. Particularly, China alone contributes to two third of the global share. The rapid expansion and intensification of aquaculture have many environmental and socioeconomic impacts both at the cultivation places and also in places where feed is produced; however, these telecoupled processes and effects are largely unknown in a quantitative manner. Here, we apply the telecoupling framework to analyze the aquaculture trade among China and other Belt and Road Initiative countries and beyond. The integrated telecoupling framework helps to demonstrate the environmental and socioeconomic interactions among the feed (and aquatic product) sending, receiving, and spillover systems. It also provides a platform to model the telecoupled processes and effects across multiple remotely connected systems. Moreover, the application of the framework reveals many research gaps and management needs on aquaculture research and management.

Characterization of heavy metal desorption from road-deposited sediment under acid rain scenarios.

PubMed

Zhao, Bo; Liu, An; Wu, Guangxue; Li, Dunzhu; Guan, Yuntao

2017-01-01

Road-deposited sediments (RDS) on urban impervious surfaces are important carriers of heavy metals. Dissolved heavy metals that come from RDS influenced by acid rain, are more harmful to urban receiving water than particulate parts. RDS and its associated heavy metals were investigated at typical functional areas, including industrial, commercial and residential sites, in Guangdong, Southern China, which was an acid rain sensitive area. Total and dissolved heavy metals in five particle size fractions were analyzed using a shaking method under acid rain scenarios. Investigated heavy metals showed no difference in the proportion of dissolved fraction in the solution under different acid rain pHs above 3.0, regardless of land use. Dissolved loading of heavy metals related to organic carbon content were different in runoff from main traffic roads of three land use types. Coarse particles (>150μm) that could be efficiently removed by conventional street sweepers, accounted for 55.1%-47.1% of the total dissolved metal loading in runoff with pH3.0-5.6. The obtained findings provided a significant scientific basis to understand heavy metal release and influence of RDS grain-size distribution and land use in dissolved heavy metal pollution affected by acid rain. Copyright © 2016. Published by Elsevier B.V.