Is traditional contraceptive use in Moldova associated with poverty and isolation?

PubMed

Lyons-Amos, Mark J; Durrant, Gabriele B; Padmadas, Sabu S

2011-05-01

This study investigates the correlates of traditional contraceptive use in Moldova, a poor country in Europe with one of the highest proportions of traditional contraceptive method users. The high reliance on traditional methods, particularly in the context of sub-replacement level fertility rate, has not been systematically evaluated in demographic research. Using cross-sectional data on a sub-sample of 6039 sexually experienced women from the 2005 Moldovan Demographic and Health Survey, this study hypothesizes that (a) economic and spatial disadvantages increase the likelihood of traditional method use, and (b) high exposure to family planning/reproductive health (FP/RH) programmes increases the propensity to modern method use. Multilevel multinomial models are used to examine the correlates of traditional method use controlling for exposure to sexual activity, socioeconomic and demographic characteristics and data structure. The results show that economic disadvantage increases the probability of traditional method use, but the overall effect is small. Although higher family planning media exposure decreases the reliance on traditional methods among younger women, it has only a marginal effect in increasing modern method use among older women. Family planning programmes designed to encourage women to switch from traditional to modern methods have some success--although the effect is considerably reduced in regions outside of the capital Chisinau. The study concludes that FP/RH efforts directed towards the poorest may have limited impact, but interventions targeted at older women could reduce the burden of unwanted pregnancies and abortions. Addressing differentials in accessing modern methods could improve uptake in rural areas.

Music and movement education as a form of motivation in teaching Greek traditional dances.

PubMed

Likesas, G; Zachopoulou, E

2006-04-01

Research has shown that motivation for participating in physical education, particularly in traditional dances, has decreased dramatically. The aim of this research was to examine whether a music and movement program would increase pleasure and intrinsic motivation of students in elementary education while teaching them Greek traditional dances. 232 students were divided into two groups, a trained group of 135 participants (72 boys, 63 girls) and a control group of 97 (53 boys, 44 girls). The trained group was taught using the music and movement teaching model of traditional dances. The control group was taught using the instructional or guided teaching method of traditional Greek dances. To measure effectiveness of the two methods was accomplished by the completion of McAuley's Intrinsic Motivation Inventory. Analysis of scores showed use of music and movement education had a positive effect on intrinsic motivation for dancing and active participation of students, especially of the trained boys' group.

Evolution of Stored-Product Entomology: Protecting the World Food Supply.

PubMed

Hagstrum, David W; Phillips, Thomas W

2017-01-31

Traditional methods of stored-product pest control were initially passed from generation to generation. Ancient literature and archaeology reveal hermetic sealing, burning sulfur, desiccant dusts, and toxic botanicals as early control methods. Whereas traditional nonchemical methods were subsequently replaced by synthetic chemicals, other traditional methods were improved and integrated with key modern pesticides. Modern stored-product integrated pest management (IPM) makes decisions using knowledge of population dynamics and threshold insect densities. IPM programs are now being fine-tuned to meet regulatory and market standards. Better sampling methods and insights from life histories and ecological studies have been used to optimize the timing of pest management. Over the past 100 years, research on stored-product insects has shifted from being largely concentrated within 10 countries to being distributed across 65 countries. Although the components of IPM programs have been well researched, more research is needed on how these components can be combined to improve effectiveness and assure the security of postharvest food as the human population increases.

Pattern Recognition Control Design

NASA Technical Reports Server (NTRS)

Gambone, Elisabeth A.

2018-01-01

Spacecraft control algorithms must know the expected vehicle response to any command to the available control effectors, such as reaction thrusters or torque devices. Spacecraft control system design approaches have traditionally relied on the estimated vehicle mass properties to determine the desired force and moment, as well as knowledge of the effector performance to efficiently control the spacecraft. A pattern recognition approach was used to investigate the relationship between the control effector commands and spacecraft responses. Instead of supplying the approximated vehicle properties and the thruster performance characteristics, a database of information relating the thruster ring commands and the desired vehicle response was used for closed-loop control. A Monte Carlo simulation data set of the spacecraft dynamic response to effector commands was analyzed to establish the influence a command has on the behavior of the spacecraft. A tool developed at NASA Johnson Space Center to analyze flight dynamics Monte Carlo data sets through pattern recognition methods was used to perform this analysis. Once a comprehensive data set relating spacecraft responses with commands was established, it was used in place of traditional control methods and gains set. This pattern recognition approach was compared with traditional control algorithms to determine the potential benefits and uses.

Current harmonics elimination control method for six-phase PM synchronous motor drives.

PubMed

Yuan, Lei; Chen, Ming-liang; Shen, Jian-qing; Xiao, Fei

2015-11-01

To reduce the undesired 5th and 7th stator harmonic current in the six-phase permanent magnet synchronous motor (PMSM), an improved vector control algorithm was proposed based on vector space decomposition (VSD) transformation method, which can control the fundamental and harmonic subspace separately. To improve the traditional VSD technology, a novel synchronous rotating coordinate transformation matrix was presented in this paper, and only using the traditional PI controller in d-q subspace can meet the non-static difference adjustment, the controller parameter design method is given by employing internal model principle. Moreover, the current PI controller parallel with resonant controller is employed in x-y subspace to realize the specific 5th and 7th harmonic component compensation. In addition, a new six-phase SVPWM algorithm based on VSD transformation theory is also proposed. Simulation and experimental results verify the effectiveness of current decoupling vector controller. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

[Applications of near-infrared spectroscopy to analysis of traditional Chinese herbal medicine].

PubMed

Li, Yan-Zhou; Min, Shun-Geng; Liu, Xia

2008-07-01

Analysis of traditional Chinese herbal medicine is of great importance to its quality control Conventional analysis methods can not meet the requirement of rapid and on-line analysis because of complex process more experiences or needed. In recent years, near-infrared spectroscopy technique has been used for rapid determination of active components, on-line quality control, identification of counterfeit and discrimination of geographical origins of herbal medicines and so on, due to its advantages of simple pretreatment, high efficiency, convenience to use solid diffuse reflection spectroscopy and fiber. In the present paper, the principles and methods of near-infrared spectroscopy technique are introduced concisely. Especially, the applications of this technique in quantitative analysis and qualitative analysis of traditional Chinese herbal medicine are reviewed.

The Application of Linear and Nonlinear Water Tanks Case Study in Teaching of Process Control

NASA Astrophysics Data System (ADS)

Li, Xiangshun; Li, Zhiang

2018-02-01

In the traditional process control teaching, the importance of passing knowledge is emphasized while the development of creative and practical abilities of students is ignored. Traditional teaching methods are not very helpful to breed a good engineer. Case teaching is a very useful way to improve students’ innovative and practical abilities. In the traditional case teaching, knowledge points are taught separately based on different examples or no examples, thus it is very hard to setup the whole knowledge structure. Though all the knowledge is learned, how to use the knowledge to solve engineering problems keeps challenging for students. In this paper, the linear and nonlinear tanks are taken as illustrative examples which involves several knowledge points of process control. The application method of each knowledge point is discussed in detail and simulated. I believe the case-based study will be helpful for students.

Multi-component determination and chemometric analysis of Paris polyphylla by ultra high performance liquid chromatography with photodiode array detection.

PubMed

Chen, Pei; Jin, Hong-Yu; Sun, Lei; Ma, Shuang-Cheng

2016-09-01

Multi-source analysis of traditional Chinese medicine is key to ensuring its safety and efficacy. Compared with traditional experimental differentiation, chemometric analysis is a simpler strategy to identify traditional Chinese medicines. Multi-component analysis plays an increasingly vital role in the quality control of traditional Chinese medicines. A novel strategy, based on chemometric analysis and quantitative analysis of multiple components, was proposed to easily and effectively control the quality of traditional Chinese medicines such as Chonglou. Ultra high performance liquid chromatography was more convenient and efficient. Five species of Chonglou were distinguished by chemometric analysis and nine saponins, including Chonglou saponins I, II, V, VI, VII, D, and H, as well as dioscin and gracillin, were determined in 18 min. The method is feasible and credible, and enables to improve quality control of traditional Chinese medicines and natural products. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Genetic reinforcement learning through symbiotic evolution for fuzzy controller design.

PubMed

Juang, C F; Lin, J Y; Lin, C T

2000-01-01

An efficient genetic reinforcement learning algorithm for designing fuzzy controllers is proposed in this paper. The genetic algorithm (GA) adopted in this paper is based upon symbiotic evolution which, when applied to fuzzy controller design, complements the local mapping property of a fuzzy rule. Using this Symbiotic-Evolution-based Fuzzy Controller (SEFC) design method, the number of control trials, as well as consumed CPU time, are considerably reduced when compared to traditional GA-based fuzzy controller design methods and other types of genetic reinforcement learning schemes. Moreover, unlike traditional fuzzy controllers, which partition the input space into a grid, SEFC partitions the input space in a flexible way, thus creating fewer fuzzy rules. In SEFC, different types of fuzzy rules whose consequent parts are singletons, fuzzy sets, or linear equations (TSK-type fuzzy rules) are allowed. Further, the free parameters (e.g., centers and widths of membership functions) and fuzzy rules are all tuned automatically. For the TSK-type fuzzy rule especially, which put the proposed learning algorithm in use, only the significant input variables are selected to participate in the consequent of a rule. The proposed SEFC design method has been applied to different simulated control problems, including the cart-pole balancing system, a magnetic levitation system, and a water bath temperature control system. The proposed SEFC has been verified to be efficient and superior from these control problems, and from comparisons with some traditional GA-based fuzzy systems.

Value of the polymerase chain reaction method for detecting tuberculosis in the bronchial tissue involved by anthracosis.

PubMed

Mirsadraee, Majid; Shafahie, Ahmad; Reza Khakzad, Mohammad; Sankian, Mojtaba

2014-04-01

Anthracofibrosis is the black discoloration of the bronchial mucosa with deformity and obstruction. Association of this disease with tuberculosis (TB) was approved. The objective of this study was to find the additional benefit of assessment of TB by the polymerase chain reaction (PCR) method. Bronchoscopy was performed on 103 subjects (54 anthracofibrosis and 49 control subjects) who required bronchoscopy for their pulmonary problems. According to bronchoscopic findings, participants were classified to anthracofibrosis and nonanthracotic groups. They were examined for TB with traditional methods such as direct smear (Ziehl-Neelsen staining), Löwenstein-Jensen culture, and histopathology and the new method "PCR" for Mycobacterium tuberculosis genome (IS6110). Age, sex, smoking, and clinical findings were not significantly different in the TB and the non-TB groups. Acid-fast bacilli could be detected by a direct smear in 12 (25%) of the anthracofibrosis subjects, and adding the results of culture and histopathology traditional tests indicated TB in 27 (31%) of the cases. Mycobacterium tuberculosis was diagnosed by PCR in 18 (33%) patients, but the difference was not significant. Detection of acid-fast bacilli in control nonanthracosis subjects was significantly lower (3, 6%), but PCR (20, 40%) and accumulation of results from all traditional methods (22, 44%) showed a nonsignificant difference. The PCR method showed a result equal to traditional methods including accumulation of smear, culture, and histopathology.

Improvement in the traditional processing method and nutritional quality of traditional extruded cassava-based snack (modified Ajogun).

PubMed

Obadina, Adewale O; Oyewole, Olusola B; Williams, Oluwasolabomi E

2013-07-01

This study was carried out to investigate and improve the traditional processing method and nutritional quality of the traditional cassava snack (Ajogun). Cassava root (Manihot esculenta Crantz L.) of TME 419 variety was processed into mash (40% moisture content). The cassava mash was mixed into different blends to produce fried traditional "Ajogun", fried and baked extrudates (modified Ajogun) as snacks. These products were analyzed to determine the proximate composition including carbohydrate, fat, protein, fiber, ash, and moisture contents and functional properties such as bulk density. The results obtained for the moisture, fat, protein, and ash contents showed significant difference (P < 0.05) between the control sample and the extrudates. However, there was no significant difference (P > 0.05) in the carbohydrate and fiber contents between the three samples. There was no significant difference (P > 0.05) in the bulk density of the snacks. Also, sensory evaluation was carried out on the cassava-based snacks using the 9-point hedonic scale to determine the degree of acceptability. Results obtained showed significant difference (P < 0.05) between the extrudates and control sample in terms of appearance, taste, flavor, color, aroma, texture, and overall acceptability. The highest acceptability level of the product was at 8.04 for the control sample (traditional Ajogun). This study has shown that "Ajogun", which is a lesser known cassava product, is rich in protein and fat.

Design and Realization of Controllable Ultrasonic Fault Detector Automatic Verification System

NASA Astrophysics Data System (ADS)

Sun, Jing-Feng; Liu, Hui-Ying; Guo, Hui-Juan; Shu, Rong; Wei, Kai-Li

The ultrasonic flaw detection equipment with remote control interface is researched and the automatic verification system is developed. According to use extensible markup language, the building of agreement instruction set and data analysis method database in the system software realizes the controllable designing and solves the diversification of unreleased device interfaces and agreements. By using the signal generator and a fixed attenuator cascading together, a dynamic error compensation method is proposed, completes what the fixed attenuator does in traditional verification and improves the accuracy of verification results. The automatic verification system operating results confirms that the feasibility of the system hardware and software architecture design and the correctness of the analysis method, while changes the status of traditional verification process cumbersome operations, and reduces labor intensity test personnel.

The effects of insect biological control on a Tamarix invaded ecosystem: ecosystem water and carbon fluxes and plant-level responses

USDA-ARS?s Scientific Manuscript database

Background / Questions / Methods: Tamarix spp. (saltcedar) has invaded many river systems in the western United States with detrimental impacts to flora and fauna. Traditional methods of invasive plant control have been ineffective or costly. Therefore, insect biological control of Tamarix with Di...

Impact of Cooperative Learning on Naval Air Traffic Controller Training.

ERIC Educational Resources Information Center

Holubec, Edythe; And Others

1993-01-01

Reports on a study of the impact of cooperative learning techniques, compared with traditional Navy instructional methods, on Navy air traffic controller trainees. Finds that cooperative learning methods improved higher level reasoning skills and resulted in no failures among the trainees. (CFR)

[Determination of heavy metals in four traditional Chinese medicines by ICP-MS].

PubMed

Wen, Hui-Min; Chen, Xiao-Hui; Dong, Ting-Xia; Zhan, Hua-Qiang; Bi, Kai-Shun

2006-08-01

To establish a ICP-MS method for the determination of heavy metals, including As, Hg, Pb, Cd, in four traditional Chinese medicines. The samples were digested by closed-versel microwave. The four heavy metals were directly analyzed by ICP-MS. Select internal standard element in for the method by which the analyse signal drife is corrected by the signal of another element (internal standard elements) added to both the standard solution and sample. For all of the analyzed heary methals, the correlative coefficient of the calibration curves was over 0.999 2. The recovery rates of the procedure were 97.5%-108.0%, and its RSD was lower than 11.6%. This method was convenient, quick-acquired, accurate and highly sensitive. The method can be used for the quality control of trace elements in traditional Chinese medicines and for the contents determination of traditional Chinese medicines from different habitats and species.

The Traditional Chinese Medicine and Relevant Treatment for the Efficacy and Safety of Atopic Dermatitis: A Systematic Review and Meta-Analysis of Randomized Controlled Trials

PubMed Central

Shi, Zhao-feng; Song, Tie-bing; Xie, Juan; Yan, Yi-quan

2017-01-01

Background Atopic dermatitis (AD) has become a common skin disease that requires systematic and comprehensive treatment to achieve adequate clinical control. Traditional Chinese medicines and related treatments have shown clinical effects for AD in many studies. But the systematic reviews and meta-analyses for them are lacking. Objective The systematic review and meta-analysis based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement were conducted to evaluate the efficacy and safety of traditional Chinese medicines and related treatments for AD treatment. Methods Randomized controlled trials (RCTs) were searched based on standardized searching rules in eight medical databases from the inception up to December 2016 and a total of 24 articles with 1,618 patients were enrolled in this meta-analysis. Results The results revealed that traditional Chinese medicines and related treatments did not show statistical differences in clinical effectiveness, SCORAD amelioration, and SSRI amelioration for AD treatment compared with control group. However, EASI amelioration of traditional Chinese medicines and related treatments for AD was superior to control group. Conclusion We need to make conclusion cautiously for the efficacy and safety of traditional Chinese medicine and related treatment on AD therapy. More standard, multicenter, double-blind randomized controlled trials (RCTs) of traditional Chinese medicine and related treatment for AD were required to be conducted for more clinical evidences providing in the future. PMID:28713436

The guinea pig as an animal model for developmental and reproductive toxicology studies.

PubMed

Rocca, Meredith S; Wehner, Nancy G

2009-04-01

Regulatory guidelines for developmental and reproductive toxicology (DART) studies require selection of "relevant" animal models as determined by kinetic, pharmacological, and toxicological data. Traditionally, rats, mice, and rabbits are the preferred animal models for these studies. However, for test articles that are pharmacologically inactive in the traditional animal models, the guinea pig may be a viable option. This choice should not be made lightly, as guinea pigs have many disadvantages compared to the traditional species, including limited historical control data, variability in pregnancy rates, small and variable litter size, long gestation, relative maturity at birth, and difficulty in dosing and breeding. This report describes methods for using guinea pigs in DART studies and provides results of positive and negative controls. Standard study designs and animal husbandry methods were modified to allow mating on the postpartum estrus in fertility studies and were used for producing cohorts of pregnant females for developmental studies. A positive control study with the pregnancy-disrupting agent mifepristone resulted in the anticipated failure of embryo implantation and supported the use of the guinea pig model. Control data for reproductive endpoints collected from 5 studies are presented. In cases where the traditional animal models are not relevant, the guinea pig can be used successfully for DART studies. (c) 2009 Wiley-Liss, Inc.

[Application of a cooperative learning approach for training residents in the emergency department and comparison with a traditional approach].

PubMed

Guillén Astete, Carlos Antonio; de la Casa Resino, Cristina; Lucica Boteanu, Alina; Blázquez Cañamero, María de Los Ángeles; Braña Cardeñosa, Adela Florinda

2015-01-01

To analyze the benefits of using a cooperative learning (CL) model to teach hospital residents doing rotations in the emergency department and to compare the CL approach to traditional training. Two training sessions on the same content were given by 2 expert instructors. A traditional method of instruction was used in one of the sessions and the CL model was used in the other. Immediately after the sessions and 3 months later, the residents took a multiple-choice test that was developed by a third expert. A control group of residents who had not attended either session also took the test. Twenty-one residents were in the CL group and 17 were in the traditional-training group. The mean (SD) scores on the examinations immediately after training were 8.81 (1.40) and 7.88 (1.26), in the CL and traditional groups, respectively (P=.0414). Three months later, the mean scores of these same residents retaking the examination and 32 control residents were as follows: CL group, 8.19 (1.12); traditional group, 7.00 (1.22); and control group, 6.37 (1.37) (P<.05, CL vs traditional; P>.05, traditional vs control). The CL approach proved superior to traditional training in terms of short- and medium-term retention of information. Although this is the first analysis of CL in this type of specialized medical training, extending its use in preparing medical residents working in emergency departments would seem to be justified.

Steering optical comb frequencies by rotating the polarization state

NASA Astrophysics Data System (ADS)

Zhang, Yanyan; Zhang, Xiaofei; Yan, Lulu; Zhang, Pan; Rao, Bingjie; Han, Wei; Guo, Wenge; Zhang, Shougang; Jiang, Haifeng

2017-12-01

Optical frequency combs, with precise control of repetition rate and carrier-envelope-offset frequency, have revolutionized many fields, such as fine optical spectroscopy, optical frequency standards, ultra-fast science research, ultra-stable microwave generation and precise ranging measurement. However, existing high bandwidth frequency control methods have small dynamic range, requiring complex hybrid control techniques. To overcome this limitation, we develop a new approach, where a home-made intra-cavity electro-optic modulator tunes polarization state of laser signal rather than only optical length of the cavity, to steer frequencies of a nonlinear-polarization-rotation mode-locked laser. By taking advantage of birefringence of the whole cavity, this approach results in not only broadband but also relative large-dynamic frequency control. Experimental results show that frequency control dynamic range increase at least one order in comparison with the traditional intra-cavity electro-optic modulator technique. In additional, this technique exhibits less side-effect than traditional frequency control methods.

Improvement in the traditional processing method and nutritional quality of traditional extruded cassava-based snack (modified Ajogun)

PubMed Central

Obadina, Adewale O; Oyewole, Olusola B; Williams, Oluwasolabomi E

2013-01-01

This study was carried out to investigate and improve the traditional processing method and nutritional quality of the traditional cassava snack (Ajogun). Cassava root (Manihot esculenta Crantz L.) of TME 419 variety was processed into mash (40% moisture content). The cassava mash was mixed into different blends to produce fried traditional “Ajogun”, fried and baked extrudates (modified Ajogun) as snacks. These products were analyzed to determine the proximate composition including carbohydrate, fat, protein, fiber, ash, and moisture contents and functional properties such as bulk density. The results obtained for the moisture, fat, protein, and ash contents showed significant difference (P < 0.05) between the control sample and the extrudates. However, there was no significant difference (P > 0.05) in the carbohydrate and fiber contents between the three samples. There was no significant difference (P > 0.05) in the bulk density of the snacks. Also, sensory evaluation was carried out on the cassava-based snacks using the 9-point hedonic scale to determine the degree of acceptability. Results obtained showed significant difference (P < 0.05) between the extrudates and control sample in terms of appearance, taste, flavor, color, aroma, texture, and overall acceptability. The highest acceptability level of the product was at 8.04 for the control sample (traditional Ajogun). This study has shown that “Ajogun”, which is a lesser known cassava product, is rich in protein and fat. PMID:24804039

Virtual reality and the traditional method for phlebotomy training among college of nursing students in Kuwait: implications for nursing education and practice.

PubMed

Vidal, Victoria L; Ohaeri, Beatrice M; John, Pamela; Helen, Delles

2013-01-01

This quasi-experimental study, with a control group and experimental group, compares the effectiveness of virtual reality simulators on developing phlebotomy skills of nursing students with the effectiveness of traditional methods of teaching. Performance of actual phlebotomy on a live client was assessed after training, using a standardized form. Findings showed that students who were exposed to the virtual reality simulator performed better in the following performance metrics: pain factor, hematoma formation, and number of reinsertions. This study confirms that the use of the virtual reality-based system to supplement the traditional method may be the optimal program for training.

Learning physics: A comparative analysis between instructional design methods

NASA Astrophysics Data System (ADS)

Mathew, Easow

The purpose of this research was to determine if there were differences in academic performance between students who participated in traditional versus collaborative problem-based learning (PBL) instructional design approaches to physics curricula. This study utilized a quantitative quasi-experimental design methodology to determine the significance of differences in pre- and posttest introductory physics exam performance between students who participated in traditional (i.e., control group) versus collaborative problem solving (PBL) instructional design (i.e., experimental group) approaches to physics curricula over a college semester in 2008. There were 42 student participants (N = 42) enrolled in an introductory physics course at the research site in the Spring 2008 semester who agreed to participate in this study after reading and signing informed consent documents. A total of 22 participants were assigned to the experimental group (n = 22) who participated in a PBL based teaching methodology along with traditional lecture methods. The other 20 students were assigned to the control group (n = 20) who participated in the traditional lecture teaching methodology. Both the courses were taught by experienced professors who have qualifications at the doctoral level. The results indicated statistically significant differences (p < .01) in academic performance between students who participated in traditional (i.e., lower physics posttest scores and lower differences between pre- and posttest scores) versus collaborative (i.e., higher physics posttest scores, and higher differences between pre- and posttest scores) instructional design approaches to physics curricula. Despite some slight differences in control group and experimental group demographic characteristics (gender, ethnicity, and age) there were statistically significant (p = .04) differences between female average academic improvement which was much higher than male average academic improvement (˜63%) in the control group which may indicate that traditional teaching methods are more effective in females, whereas there was no significant difference noted in the experimental group between male and female participants. There was a statistically significant and negative relationship (r = -.61, p = .01) between age and physics pretest scores in the control group. No statistical analyses yielded significantly different average academic performance values in either group as delineated by ethnicity.

Color adjustable LED driver design based on PWM

NASA Astrophysics Data System (ADS)

Du, Yiying; Yu, Caideng; Que, Longcheng; Zhou, Yun; Lv, Jian

2012-10-01

Light-emitting diode (LED) is a liquid cold source light source that rapidly develops in recent years. The merits of high brightness efficiency, long duration, high credibility and no pollution make it satisfy our demands for consumption and natural life, and gradually replace the traditional lamp-house-incandescent light and fluorescent light. However, because of the high cost and unstable drive circuit, the application range is restricted. To popularize the applications of the LED, we focus on improving the LED driver circuit to change this phenomenon. Basing on the traditional LED drive circuit, we adopt pre-setup constant current model and introduce pulse width modulation (PWM) control method to realize adjustable 256 level-grays display. In this paper, basing on human visual characteristics and the traditional PWM control method, we propose a new PWM control timing clock to alter the duty cycle of PWM signal to realize the simple gamma correction. Consequently, the brightness can accord with our visual characteristics.

Cults and Satanism: Threats to Teens. A "Bulletin" Special.

ERIC Educational Resources Information Center

Rudin, Marcia R.

1990-01-01

Administrators, teachers, and counselors must learn to recognize the signs of cult or Satanic-influenced youngsters. The process and effects of mind-control are unique and cannot be understood in traditional psychiatric terms or treated by traditional therapeutic methods. Schools should hold preventive cult-education programs. The International…

Fuzzy Logic Controller Stability Analysis Using a Satisfiability Modulo Theories Approach

NASA Technical Reports Server (NTRS)

Arnett, Timothy; Cook, Brandon; Clark, Matthew A.; Rattan, Kuldip

2017-01-01

While many widely accepted methods and techniques exist for validation and verification of traditional controllers, at this time no solutions have been accepted for Fuzzy Logic Controllers (FLCs). Due to the highly nonlinear nature of such systems, and the fact that developing a valid FLC does not require a mathematical model of the system, it is quite difficult to use conventional techniques to prove controller stability. Since safety-critical systems must be tested and verified to work as expected for all possible circumstances, the fact that FLC controllers cannot be tested to achieve such requirements poses limitations on the applications for such technology. Therefore, alternative methods for verification and validation of FLCs needs to be explored. In this study, a novel approach using formal verification methods to ensure the stability of a FLC is proposed. Main research challenges include specification of requirements for a complex system, conversion of a traditional FLC to a piecewise polynomial representation, and using a formal verification tool in a nonlinear solution space. Using the proposed architecture, the Fuzzy Logic Controller was found to always generate negative feedback, but inconclusive for Lyapunov stability.

A Meta-Analysis Comparing Liposomal Bupivacaine and Traditional Periarticular Injection for Pain Control after Total Knee Arthroplasty.

PubMed

Sun, Hao; Huang, Zhiyu; Zhang, Zhiqi; Liao, Weiming

2018-04-04

Liposomal bupivacaine is a novel method for pain control after total knee arthroplasty (TKA), but recent studies showed no advantage for patients undergoing TKA compared with traditional periarticular injection (PAI). The purpose of this analysis was to compare the clinical outcomes between liposomal bupivacaine treatment and traditional PAI. We retrospectively reviewed data from 16 clinical trials in published databases from their inception to June 2017. The primary outcome was postoperative Visual Analogue Scale (VAS) score and secondary outcomes included opiate usage, narcotic consumption, range of motion, and length of stay. Nine randomized controlled trials and seven nonrandomized controlled trials involving 924 liposomal bupivacaine cases and 1,293 traditional PAI cases were eligible for inclusion in the meta-analysis. No differences were detected in most of the clinical outcomes, except for postoperative VAS within 12 hours and length of stay. This analysis showed that liposomal bupivacaine is not associated with significant improvement in postoperative pain control or other outcomes in TKA compared with PAI. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

The effects of traditional learning and a learning cycle inquiry learning strategy on students' science achievement and attitudes toward elementary science

NASA Astrophysics Data System (ADS)

Ebrahim, Ali

The purpose of this study is to examine the impact of two instructional methods on students' academic achievement and attitudes toward elementary science in the State of Kuwait: traditional teaching method and the 4-E learning cycle inquiry teaching method. The subjects were 111 students from four intact 4th grade classes. The experiment group (n = 56) received the learning cycle instruction while the control group (n = 55) received a more traditional approach over a four week period. The same female teacher taught the experimental and control groups for boys and a different female teacher taught experimental and control groups for girls. The dependent variables were measured through the use of: (1) a science achievement test to assess student achievement; and (2) an attitude survey to measure students' attitudes toward science. Quantitative data were collected on students' pre- and post-treatment achievement and attitudes measures. The two way MANOVA reveals that: the 4-E learning cycle instructional method produces significantly greater achievement and attitudes among fourth grade science students than the traditional teaching approach F (2, 93) = 19.765, (P = .000), corresponding to Wilks' Lambda = .702 with an effect size of .298 and a power of 1. In light of these findings, it is therefore suggested that students can achieve greater and have higher science attitudes when the 4-E learning cycle is used. In addition, these findings support the notion that effective instruction in teaching science, such as the 4-E learning cycle instruction, should be proposed and implemented in elementary schools.

Comprehensive reliability allocation method for CNC lathes based on cubic transformed functions of failure mode and effects analysis

NASA Astrophysics Data System (ADS)

Yang, Zhou; Zhu, Yunpeng; Ren, Hongrui; Zhang, Yimin

2015-03-01

Reliability allocation of computerized numerical controlled(CNC) lathes is very important in industry. Traditional allocation methods only focus on high-failure rate components rather than moderate failure rate components, which is not applicable in some conditions. Aiming at solving the problem of CNC lathes reliability allocating, a comprehensive reliability allocation method based on cubic transformed functions of failure modes and effects analysis(FMEA) is presented. Firstly, conventional reliability allocation methods are introduced. Then the limitations of direct combination of comprehensive allocation method with the exponential transformed FMEA method are investigated. Subsequently, a cubic transformed function is established in order to overcome these limitations. Properties of the new transformed functions are discussed by considering the failure severity and the failure occurrence. Designers can choose appropriate transform amplitudes according to their requirements. Finally, a CNC lathe and a spindle system are used as an example to verify the new allocation method. Seven criteria are considered to compare the results of the new method with traditional methods. The allocation results indicate that the new method is more flexible than traditional methods. By employing the new cubic transformed function, the method covers a wider range of problems in CNC reliability allocation without losing the advantages of traditional methods.

A novel asynchronous access method with binary interfaces

PubMed Central

2008-01-01

Background Traditionally synchronous access strategies require users to comply with one or more time constraints in order to communicate intent with a binary human-machine interface (e.g., mechanical, gestural or neural switches). Asynchronous access methods are preferable, but have not been used with binary interfaces in the control of devices that require more than two commands to be successfully operated. Methods We present the mathematical development and evaluation of a novel asynchronous access method that may be used to translate sporadic activations of binary interfaces into distinct outcomes for the control of devices requiring an arbitrary number of commands to be controlled. With this method, users are required to activate their interfaces only when the device under control behaves erroneously. Then, a recursive algorithm, incorporating contextual assumptions relevant to all possible outcomes, is used to obtain an informed estimate of user intention. We evaluate this method by simulating a control task requiring a series of target commands to be tracked by a model user. Results When compared to a random selection, the proposed asynchronous access method offers a significant reduction in the number of interface activations required from the user. Conclusion This novel access method offers a variety of advantages over traditionally synchronous access strategies and may be adapted to a wide variety of contexts, with primary relevance to applications involving direct object manipulation. PMID:18959797

Equine recurrent uveitis: treatment.

PubMed

Curling, Amanda

2011-06-01

Equine recurrent uveitis has traditionally been treated with medical management to reduce ocular inflammation and control pain during a single episode. Newer management methods include surgical options such as cyclosporine implantation and vitrectomy. These methods were developed not only to control inflammation but also to eliminate the underlying cause of uveitis in order to prevent recurrence.

Experiences in Tick Control by Acaricide in the Traditional Cattle Sector in Zambia and Burkina Faso: Possible Environmental and Public Health Implications.

PubMed

De Meneghi, Daniele; Stachurski, Frédéric; Adakal, Hassane

2016-01-01

Livestock, especially cattle, play a paramount role in agriculture production systems, particularly in poor countries throughout the world. Ticks and tick-borne diseases (TBDs) have an important impact on livestock and agriculture production in sub-Saharan Africa. The authors review the most common methods used for the control of ticks and TBDs. Special emphasis is given to the direct application of acaricides to the host animals. The possible environmental and public health adverse effects (i.e., risks for the workers, residues in the environment and in food products of animal origin) are mentioned. The authors present two case studies, describing different field experiences in controlling ticks in two African countries. In Zambia (Southern Africa), a strategic dipping regime was used to control Rhipicephalus appendiculatus ticks, vectors of theileriosis, a deadly disease affecting cattle in the traditional livestock sector in Southern Province. The dipping regime adopted allowed to reduce the tick challenge and cattle mortally rate and, at the same time, to employ less acaricide as compared to the intensive dipping used so far, without disrupting the building-up of enzootic stability. In Burkina Faso (West Africa), where dipping was never used for tick control, an acaricide footbath was employed as an alternative method to the traditional technique used locally (portable manual sprayers). This was developed from field observations on the invasion/attachment process of the Amblyomma variegatum ticks - vector of cowdriosis - on the animal hosts, leading to a control method aimed to kill ticks temporarily attached to the interdigital areas before their permanent attachment to the predilection sites. This innovative method has been overall accepted by the local farmers. It has the advantage of greatly reducing costs of treatments and has a minimal environmental impact, making footbath a sustainable and replicable method, adoptable also in other West African countries. Although the two methods described, developed in very different contexts, are not comparable - if public health and environmental implications are taken into account, if a balance among efficacy of the control method(s), cost-effectiveness and sustainability is reached - a way forward for the implementation of a One Health strategy can be set.

Cyber and Traditional Bullying Victimization as a Risk Factor for Mental Health Problems and Suicidal Ideation in Adolescents

PubMed Central

Bannink, Rienke; Broeren, Suzanne; van de Looij – Jansen, Petra M.; de Waart, Frouwkje G.; Raat, Hein

2014-01-01

Purpose To examine whether traditional and cyber bullying victimization were associated with adolescent's mental health problems and suicidal ideation at two-year follow-up. Gender differences were explored to determine whether bullying affects boys and girls differently. Methods A two-year longitudinal study was conducted among first-year secondary school students (N = 3181). Traditional and cyber bullying victimization were assessed at baseline, whereas mental health status and suicidal ideation were assessed at baseline and follow-up by means of self-report questionnaires. Logistic regression analyses were conducted to assess associations between these variables while controlling for baseline problems. Additionally, we tested whether gender differences in mental health and suicidal ideation were present for the two types of bullying. Results There was a significant interaction between gender and traditional bullying victimization and between gender and cyber bullying victimization on mental health problems. Among boys, traditional and cyber bullying victimization were not related to mental health problems after controlling for baseline mental health. Among girls, both traditional and cyber bullying victimization were associated with mental health problems after controlling for baseline mental health. No significant interaction between gender and traditional or cyber bullying victimization on suicidal ideation was found. Traditional bullying victimization was associated with suicidal ideation, whereas cyber bullying victimization was not associated with suicidal ideation after controlling for baseline suicidal ideation. Conclusions Traditional bullying victimization is associated with an increased risk of suicidal ideation, whereas traditional, as well as cyber bullying victimization is associated with an increased risk of mental health problems among girls. These findings stress the importance of programs aimed at reducing bullying behavior, especially because early-onset mental health problems may pose a risk for the development of psychiatric disorders in adulthood. PMID:24718563

Augmented reality telementoring (ART) platform: a randomized controlled trial to assess the efficacy of a new surgical education technology.

PubMed

Vera, Angelina M; Russo, Michael; Mohsin, Adnan; Tsuda, Shawn

2014-12-01

Laparoscopic skills training has evolved over recent years. However, conveying a mentor's directions using conventional methods, without realistic on-screen visual cues, can be difficult and confusing. To facilitate laparoscopic skill transference, an augmented reality telementoring (ART) platform was designed to overlay the instruments of a mentor onto the trainee's laparoscopic monitor. The aim of this study was to compare the effectiveness of this new teaching modality to traditional methods in novices performing an intracorporeal suturing task. Nineteen pre-medical and medical students were randomized into traditional mentoring (n = 9) and ART (n = 10) groups for a laparoscopic suturing and knot-tying task. Subjects received either traditional mentoring or ART for 1 h on the validated fundamentals of laparoscopic surgery intracorporeal suturing task. Tasks for suturing were recorded and scored for time and errors. Results were analyzed using means, standard deviation, power regression analysis, correlation coefficient, analysis of variance, and student's t test. Using Wright's cumulative average model (Y = aX (b)) the learning curve slope was significantly steeper, demonstrating faster skill acquisition, for the ART group (b = -0.567, r (2) = 0.92) than the control group (b = -0.453, r (2) = 0.74). At the end of 10 repetitions or 1 h of practice, the ART group was faster versus traditional (mean 167.4 vs. 242.4 s, p = 0.014). The ART group also had fewer fails (8) than the traditional group (13). The ART Platform may be a more effective training technique in teaching laparoscopic skills to novices compared to traditional methods. ART conferred a shorter learning curve, which was more pronounced in the first 4 trials. ART reduced the number of failed attempts and resulted in faster suture times by the end of the training session. ART may be a more effective training tool in laparoscopic surgical training for complex tasks than traditional methods.

The Use of Reading Games (Activities) in the Classroom.

ERIC Educational Resources Information Center

Georges, Betty

A study was conducted to determine if the use of reading games or activities would cause greater improvement in the reading achievement scores of third grade low-achieving students in an urban school than would traditional instructional methods. A control group of five children received traditional reading instruction, while an experimental group…

A Robust Cooperated Control Method with Reinforcement Learning and Adaptive H∞ Control

NASA Astrophysics Data System (ADS)

Obayashi, Masanao; Uchiyama, Shogo; Kuremoto, Takashi; Kobayashi, Kunikazu

This study proposes a robust cooperated control method combining reinforcement learning with robust control to control the system. A remarkable characteristic of the reinforcement learning is that it doesn't require model formula, however, it doesn't guarantee the stability of the system. On the other hand, robust control system guarantees stability and robustness, however, it requires model formula. We employ both the actor-critic method which is a kind of reinforcement learning with minimal amount of computation to control continuous valued actions and the traditional robust control, that is, H∞ control. The proposed system was compared method with the conventional control method, that is, the actor-critic only used, through the computer simulation of controlling the angle and the position of a crane system, and the simulation result showed the effectiveness of the proposed method.

Tuning a fuzzy controller using quadratic response surfaces

NASA Technical Reports Server (NTRS)

Schott, Brian; Whalen, Thomas

1992-01-01

Response surface methodology, an alternative method to traditional tuning of a fuzzy controller, is described. An example based on a simulated inverted pendulum 'plant' shows that with (only) 15 trial runs, the controller can be calibrated using a quadratic form to approximate the response surface.

Epidemiology and control of east coast fever in Zambia. A field trial with traditionally managed Sanga cattle.

PubMed

Minjauw, B; Otte, M J; James, A D

1998-06-29

The main objective of the reported field trial was to compare different East Coast Fever (ECF) control strategies for their efficacy, effect on cattle productivity and cost-effectiveness. Five strategies were tested in groups of traditionally managed Sanga cattle over a period of 2.5 years. Two groups were under intensive tick control, one group immunized by the infection and treatment method and the other non-immunized. Two groups were under no tick control, one group immunized and the other non-immunized (the control group). The fifth group was under strategic tick control and was immunized against ECF. All ECF control methods tested significantly reduced mortality, but no marked differences to the control group were seen in other production parameters. No difference in mortality was observed between animals protected from ECF by immunization or by tick control. The most cost-effective method of controlling the disease was by immunization. A financial analysis showed that under the prevailing conditions the break-even price for immunization ranged from US$21.5 to US$25.7 depending of the proportion of reactors. The carrier state induced by immunization did not lead to a persistent high incidence of ECF in non-immunized animals using the same grazing area.

Performance of statistical process control methods for regional surgical site infection surveillance: a 10-year multicentre pilot study.

PubMed

Baker, Arthur W; Haridy, Salah; Salem, Joseph; Ilieş, Iulian; Ergai, Awatef O; Samareh, Aven; Andrianas, Nicholas; Benneyan, James C; Sexton, Daniel J; Anderson, Deverick J

2017-11-24

Traditional strategies for surveillance of surgical site infections (SSI) have multiple limitations, including delayed and incomplete outbreak detection. Statistical process control (SPC) methods address these deficiencies by combining longitudinal analysis with graphical presentation of data. We performed a pilot study within a large network of community hospitals to evaluate performance of SPC methods for detecting SSI outbreaks. We applied conventional Shewhart and exponentially weighted moving average (EWMA) SPC charts to 10 previously investigated SSI outbreaks that occurred from 2003 to 2013. We compared the results of SPC surveillance to the results of traditional SSI surveillance methods. Then, we analysed the performance of modified SPC charts constructed with different outbreak detection rules, EWMA smoothing factors and baseline SSI rate calculations. Conventional Shewhart and EWMA SPC charts both detected 8 of the 10 SSI outbreaks analysed, in each case prior to the date of traditional detection. Among detected outbreaks, conventional Shewhart chart detection occurred a median of 12 months prior to outbreak onset and 22 months prior to traditional detection. Conventional EWMA chart detection occurred a median of 7 months prior to outbreak onset and 14 months prior to traditional detection. Modified Shewhart and EWMA charts additionally detected several outbreaks earlier than conventional SPC charts. Shewhart and SPC charts had low false-positive rates when used to analyse separate control hospital SSI data. Our findings illustrate the potential usefulness and feasibility of real-time SPC surveillance of SSI to rapidly identify outbreaks and improve patient safety. Further study is needed to optimise SPC chart selection and calculation, statistical outbreak detection rules and the process for reacting to signals of potential outbreaks. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

[Physical fingerprint for quality control of traditional Chinese medicine extract powders].

PubMed

Zhang, Yi; Xu, Bing; Sun, Fei; Wang, Xin; Zhang, Na; Shi, Xin-Yuan; Qiao, Yan-Jiang

2016-06-01

The physical properties of both raw materials and excipients are closely correlated with the quality of traditional Chinese medicine preparations in oral solid dosage forms. In this paper, based on the concept of the chemical fingerprint for quality control of traditional Chinese medicine products, the method of physical fingerprint for quality evaluation of traditional Chinese medicine extract powders was proposed. This novel physical fingerprint was built by the radar map, and consisted of five primary indexes (i.e. stackablity, homogeneity, flowability, compressibility and stability) and 12 secondary indexes (i.e. bulk density, tap density, particle size<50 μm percentage, relative homogeneity index, hausner ratio, angle of repose, powder flow time, inter-particle porosity, Carr index, cohesion index, loss on drying, hygroscopicity). Panax notoginseng saponins (PNS) extract was taken for an example. This paper introduced the application of physical fingerprint in the evaluation of source-to-source and batch-to-batch quality consistence of PNS extract powders. Moreover, the physical fingerprint of PNS was built by calculating the index of parameters, the index of parametric profile and the index of good compressibility, in order to successfully predict the compressibility of the PNS extract powder and relevant formulations containing PNS extract powder and conventional pharmaceutical excipients. The results demonstrated that the proposed method could not only provide new insights into the development and process control of traditional Chinese medicine solid dosage forms. Copyright© by the Chinese Pharmaceutical Association.

The effectiveness of computer-managed instruction versus traditional classroom lecture on achievement outcomes.

PubMed

Schmidt, S M; Arndt, M J; Gaston, S; Miller, B J

1991-01-01

This controlled experimental study examines the effect of two teaching methods on achievement outcomes from a 15-week, 2 credit hour semester course taught at two midwestern universities. Students were randomly assigned to either computer-managed instruction in which faculty function as tutors or the traditional classroom course of study. In addition, the effects of age, grade point average, attitudes toward computers, and satisfaction with the course on teaching method were analyzed using analysis of covariance. Younger students achieved better scores than did older students. Regardless of teaching method, however, neither method appeared to be better than the other for teaching course content. Students did not prefer one method over the other as indicated by their satisfaction scores. With demands upon university faculty to conduct research and publish, alternative methods of teaching that free faculty from the classroom should be considered. This study suggests that educators can select such an alternative teaching method to traditional classroom teaching without sacrificing quality education for certain courses.

Assessing Health Promotion Interventions: Limitations of Traditional Research Methods in Community-Based Studies.

PubMed

Dressel, Anne; Schneider, Robert; DeNomie, Melissa; Kusch, Jennifer; Welch, Whitney; Sosa, Mirtha; Yeldell, Sally; Maida, Tatiana; Wineberg, Jessica; Holt, Keith; Bernstein, Rebecca

2017-09-01

Most low-income Americans fail to meet physical activity recommendations. Inactivity and poor diet contribute to obesity, a risk factor for multiple chronic diseases. Health promotion activities have the potential to improve health outcomes for low-income populations. Measuring the effectiveness of these activities, however, can be challenging in community settings. A "Biking for Health" study tested the impact of a bicycling intervention on overweight or obese low-income Latino and African American adults to reduce barriers to cycling and increase physical activity and fitness. A randomized controlled trial was conducted in Milwaukee, Wisconsin, in summer 2015. A 12-week bicycling intervention was implemented at two sites with low-income, overweight, or obese Latino and African American adults. We found that randomized controlled trial methodology was suboptimal for use in this small pilot study and that it negatively affected participation. More discussion is needed about the effectiveness of using traditional research methods in community settings to assess the effectiveness of health promotion interventions. Modifications or alternative methods may yield better results. The aim of this article is to discuss the effectiveness and feasibility of using traditional research methods to assess health promotion interventions in community-based settings.

Considerations for the implementation and operation of stormwater control measure (SCM) performance monitoring systems

EPA Science Inventory

Green infrastructure (GI) studies are needed to make informed decisions about whether or not to select GI technologies over traditional urban drainage control methods and to assist in the timing of effective maintenance. Two permeable pavement infiltration stormwater control meas...

Improving temporal bone dissection using self-directed virtual reality simulation: results of a randomized blinded control trial.

PubMed

Zhao, Yi Chen; Kennedy, Gregor; Yukawa, Kumiko; Pyman, Brian; O'Leary, Stephen

2011-03-01

A significant benefit of virtual reality (VR) simulation is the ability to provide self-direct learning for trainees. This study aims to determine whether there are any differences in performance of cadaver temporal bone dissections between novices who received traditional teaching methods and those who received unsupervised self-directed learning in a VR temporal bone simulator. Randomized blinded control trial. Royal Victorian Eye and Ear Hospital. Twenty novice trainees. After receiving an hour lecture, participants were randomized into 2 groups to receive an additional 2 hours of training via traditional teaching methods or self-directed learning using a VR simulator with automated guidance. The simulation environment presented participants with structured training tasks, which were accompanied by real-time computer-generated feedback as well as real operative videos and photos. After the training, trainees were asked to perform a cortical mastoidectomy on a cadaveric temporal bone. The dissection was videotaped and assessed by 3 otologists blinded to participants' teaching group. The overall performance scores of the simulator-based training group were significantly higher than those of the traditional training group (67% vs 29%; P < .001), with an intraclass correlation coefficient of 0.93, indicating excellent interrater reliability. Using other assessments of performance, such as injury size, the VR simulator-based training group also performed better than the traditional group. This study indicates that self-directed learning on VR simulators can be used to improve performance on cadaver dissection in novice trainees compared with traditional teaching methods alone.

Evaluation of box culvert maintenance methods.

DOT National Transportation Integrated Search

2015-02-01

Traditional methods, such as using a vactor truck, for clearing culverts greater than 48 inches : of debris and accumulated sediment may be inefficient and costly. A survey of states outside : of Ohio has shown several regularly use remote controlled...

[Research on fuzzy proportional-integral-derivative control of master-slave minimally invasive operation robot driver].

PubMed

Zhao, Ximei; Ren, Chengyi; Liu, Hao; Li, Haogyi

2014-12-01

Robotic catheter minimally invasive operation requires that the driver control system has the advantages of quick response, strong anti-jamming and real-time tracking of target trajectory. Since the catheter parameters of itself and movement environment and other factors continuously change, when the driver is controlled using traditional proportional-integral-derivative (PID), the controller gain becomes fixed once the PID parameters are set. It can not change with the change of the parameters of the object and environmental disturbance so that its change affects the position tracking accuracy, and may bring a large overshoot endangering patients' vessel. Therefore, this paper adopts fuzzy PID control method to adjust PID gain parameters in the tracking process in order to improve the system anti-interference ability, dynamic performance and tracking accuracy. The simulation results showed that the fuzzy PID control method had a fast tracking performance and a strong robustness. Compared with those of traditional PID control, the feasibility and practicability of fuzzy PID control are verified in a robotic catheter minimally invasive operation.

Traditional Instruction versus Virtual Reality Simulation: A Comparative Study of Phlebotomy Training among Nursing Students in Kuwait

ERIC Educational Resources Information Center

William, Abeer; Vidal, Victoria L.; John, Pamela

2016-01-01

This quasi-experimental study compared differences in phlebotomy performance on a live client, between a control group taught through the traditional method and an experimental group using virtual reality simulation. The study showed both groups had performed successfully, using the following metrics: number of reinsertions, pain factor, hematoma…

A meta-analysis of the effects of non-traditional teaching methods on the critical thinking abilities of nursing students.

PubMed

Lee, JuHee; Lee, Yoonju; Gong, SaeLom; Bae, Juyeon; Choi, Moonki

2016-09-15

Scientific framework is important in designing curricula and evaluating students in the field of education and clinical practice. The purpose of this study was to examine the effectiveness of non-traditional educational methods on critical thinking skills. A systematic review approach was applied. Studies published in peer-reviewed journals from January 2001 to December 2014 were searched using electronic databases and major education journals. A meta-analysis was performed using Review Manager 5.2. Reviewing the included studies, the California Critical Thinking Dispositions Inventory (CCTDI) and California Critical Thinking Skills Test (CCTST) were used to assess the effectiveness of critical thinking in the meta-analysis. The eight CCTDI datasets showed that non- traditional teaching methods (i.e., no lectures) were more effective compared to control groups (standardized mean difference [SMD]: 0.42, 95 % confidence interval [CI]: 0.26-0.57, p < .00001). And six CCTST datasets showed the teaching and learning methods in these studies were also had significantly more effects when compared to the control groups (SMD: 0.29, 95 % CI: 0.10-0.48, p = 0.003). This research showed that new teaching and learning methods designed to improve critical thinking were generally effective at enhancing critical thinking dispositions.

Current Trends in Modeling Research for Turbulent Aerodynamic Flows

NASA Technical Reports Server (NTRS)

Gatski, Thomas B.; Rumsey, Christopher L.; Manceau, Remi

2007-01-01

The engineering tools of choice for the computation of practical engineering flows have begun to migrate from those based on the traditional Reynolds-averaged Navier-Stokes approach to methodologies capable, in theory if not in practice, of accurately predicting some instantaneous scales of motion in the flow. The migration has largely been driven by both the success of Reynolds-averaged methods over a wide variety of flows as well as the inherent limitations of the method itself. Practitioners, emboldened by their ability to predict a wide-variety of statistically steady, equilibrium turbulent flows, have now turned their attention to flow control and non-equilibrium flows, that is, separation control. This review gives some current priorities in traditional Reynolds-averaged modeling research as well as some methodologies being applied to a new class of turbulent flow control problems.

Medial Versus Traditional Approach to US-guided TAP Blocks for Open Inguinal Hernia Repair

ClinicalTrials.gov

2012-04-30

Abdominal Muscles/Ultrasonography; Adult; Ambulatory Surgical Procedures; Anesthetics, Local/Administration & Dosage; Ropivacaine/Administration & Dosage; Ropivacaine/Analogs & Derivatives; Hernia, Inguinal/Surgery; Humans; Nerve Block/Methods; Pain Measurement/Methods; Pain, Postoperative/Prevention & Control; Ultrasonography, Interventional

The Effects of Problem-Solving Teaching on Creative Thinking among District 2 High School Students in Sari City.

PubMed

Nozari, Ali Yazdanpanah; Siamian, Hasan

2014-12-01

Nowadays, regarding the learners' needs and social conditions, it is obviously needed to revise and reconsider the traditional methods and approaches in teaching. The problem solving approach is one of the new ways in Teaching and learning process. This study aimed at studying and examining the effect of "problem-solving" approach on creative thinking of high school female students. An experimental method is used for this research. In this research, 342 out of 3047 female-students from Sari high schools were randomly selected. These 342 students were divided into two groups (experimental and control) in which there were seven classrooms. The total number of students in every group was about 171. After testing them with Jamal Abedi creativity test, it was revealed that two groups were equal in creativity score. The tests were done through Requirements. The experimental group was taught by problem solving method for three months while the control group was taught by traditional method. The research results showed that using descriptive indices and t-test for the two independent sample groups in which problem solving teaching method was used in teaching processes had an effect on creativity level in comparison with traditional method used in the control group. Considering the results of this study, the application of problem-solving teaching methods increased the creativity and its components (fluidity, expansion, originality and flexibility) in learners, therefore, it is recommended that students be encouraged to take classes on frequent responses on various topics (variability) and draw attention on different issues, and expand their analysis on elements in particular courses like art (expansion). To enhance the learner's mental flexibility and attention to various aspects, they are encouraged to provide a variety of responses.

Rose garden promises of intelligent tutoring systems: Blossom or thorn

NASA Technical Reports Server (NTRS)

Shute, Valerie J.

1991-01-01

Intelligent tutoring systems (ITS) have been in existence for over a decade. However, few controlled evaluation studies have been conducted comparing the effectiveness of these systems to more traditional instruction methods. Two main promises of ITSs are examined: (1) Engender more effective and efficient learning in relation to traditional formats; and (2) Reduce the range of learning outcome measures where a majority of individuals are elevated to high performance levels. Bloom (1984) has referred to these as the two sigma problem; to achieve two standard deviation improvements with tutoring over traditional instruction methods. Four ITSs are discussed in relation to the two promises. These tutors have undergone systematic, controlled evaluations: (1) The LISP tutor (Anderson Farrell and Sauers, 1984); (2) Smithtown (Shute and Glaser, in press); (3) Sherlock (Lesgold, Lajoie, Bunzo and Eggan, 1990); and (4) The Pascal ITS (Bonar, Cunningham, Beatty and Well, 1988). Results show that these four tutors do accelerate learning with no degradation in final outcome. Suggestions for improvements to the design and evaluation of ITSs are discussed.

Preliminary Assessment of Optimal Longitudinal-Mode Control for Drag Reduction through Distributed Aeroelastic Shaping

NASA Technical Reports Server (NTRS)

Ippolito, Corey; Nguyen, Nhan; Lohn, Jason; Dolan, John

2014-01-01

The emergence of advanced lightweight materials is resulting in a new generation of lighter, flexible, more-efficient airframes that are enabling concepts for active aeroelastic wing-shape control to achieve greater flight efficiency and increased safety margins. These elastically shaped aircraft concepts require non-traditional methods for large-scale multi-objective flight control that simultaneously seek to gain aerodynamic efficiency in terms of drag reduction while performing traditional command-tracking tasks as part of a complete guidance and navigation solution. This paper presents results from a preliminary study of a notional multi-objective control law for an aeroelastic flexible-wing aircraft controlled through distributed continuous leading and trailing edge control surface actuators. This preliminary study develops and analyzes a multi-objective control law derived from optimal linear quadratic methods on a longitudinal vehicle dynamics model with coupled aeroelastic dynamics. The controller tracks commanded attack-angle while minimizing drag and controlling wing twist and bend. This paper presents an overview of the elastic aircraft concept, outlines the coupled vehicle model, presents the preliminary control law formulation and implementation, presents results from simulation, provides analysis, and concludes by identifying possible future areas for research

Experiences in Tick Control by Acaricide in the Traditional Cattle Sector in Zambia and Burkina Faso: Possible Environmental and Public Health Implications

PubMed Central

De Meneghi, Daniele; Stachurski, Frédéric; Adakal, Hassane

2016-01-01

Livestock, especially cattle, play a paramount role in agriculture production systems, particularly in poor countries throughout the world. Ticks and tick-borne diseases (TBDs) have an important impact on livestock and agriculture production in sub-Saharan Africa. The authors review the most common methods used for the control of ticks and TBDs. Special emphasis is given to the direct application of acaricides to the host animals. The possible environmental and public health adverse effects (i.e., risks for the workers, residues in the environment and in food products of animal origin) are mentioned. The authors present two case studies, describing different field experiences in controlling ticks in two African countries. In Zambia (Southern Africa), a strategic dipping regime was used to control Rhipicephalus appendiculatus ticks, vectors of theileriosis, a deadly disease affecting cattle in the traditional livestock sector in Southern Province. The dipping regime adopted allowed to reduce the tick challenge and cattle mortally rate and, at the same time, to employ less acaricide as compared to the intensive dipping used so far, without disrupting the building-up of enzootic stability. In Burkina Faso (West Africa), where dipping was never used for tick control, an acaricide footbath was employed as an alternative method to the traditional technique used locally (portable manual sprayers). This was developed from field observations on the invasion/attachment process of the Amblyomma variegatum ticks – vector of cowdriosis – on the animal hosts, leading to a control method aimed to kill ticks temporarily attached to the interdigital areas before their permanent attachment to the predilection sites. This innovative method has been overall accepted by the local farmers. It has the advantage of greatly reducing costs of treatments and has a minimal environmental impact, making footbath a sustainable and replicable method, adoptable also in other West African countries. Although the two methods described, developed in very different contexts, are not comparable – if public health and environmental implications are taken into account, if a balance among efficacy of the control method(s), cost-effectiveness and sustainability is reached – a way forward for the implementation of a One Health strategy can be set. PMID:27882313

Crying Behavior and the "Nonviolent" Leboyer Method of Delivery.

ERIC Educational Resources Information Center

Hamilton, Joan Safran

This paper reports on a 3-month longitudinal study comparing the crying behavior of a group of babies delivered by the "nonviolent" Leboyer method with a control group delivered by traditional methods. Subjects were 24 white, middle class infants delivered by minimally medicated, multiparous and primiparous mothers. Fourteen newborns…

A comparison of student characteristics in traditional and Web-based college science courses

NASA Astrophysics Data System (ADS)

Andrikanich, Meghan

Distance learning options at colleges and universities are increasing dramatically (e.g. National Center for Educational Statistics [NCES], 1998; NCES, 2001). Web-based courses create an interesting learning environment for study (e.g., Dupin-Bryant, 2004; Maki & Maki, 2003). Because science is a topic that induces anxiety for many students (e.g., Brownlow, et al., 2000; Greenburg & Mallow, 1982), and test anxiety has been linked to reduced academic performance (e.g., Bruch, 1981; Spielberger, 1979), the intersection of course format, science, and test anxiety is an area in need of research. This study used an explanatory mixed method design. One hundred and seven web-based science students and 110 students enrolled in traditional courses completed a questionnaire regarding demographic and personal factors, the Reduced Reaction to Tests (RTT) (Benson & Bandalos, 1992) and the Locus of Control of Behavior Scale (Craig, Franklin, & Andrews, 1984). Ten students participated in a follow-up interview. Quantitative results found no significant difference between age, racial/ethnic background, student status (full-time or part-time), or degree program being pursued between traditional and web-based science courses. Significantly more females, more students employed full-time, and with an external locus of control enrolled in web-based courses. Students in traditional courses experienced more test anxiety due to test-irrelevant thoughts. Traditional students experienced more anxiety in traditional science courses, while nontraditional students experienced more anxiety in web-based science courses. Expected course grade and locus of control predicted test anxiety in traditional courses, and previous web experience, expected grade, and locus of control predicted test anxiety for web-based courses. Qualitative data indicated that students in both formats expressed opinions regarding course format, studying and test preparation methods, test-taking, communication with instructors in general, and specifically related to testing. Opinions indicated students prefer a comfortable course environment, whether that involves technology or not. Several recommendations can be made. A continued increase in the type and variety of web-based courses will allow students continued flexibility in course scheduling. Multiple-choice tests should be considered to reduce student anxiety. Instructors should strive towards creating comfortable classroom environments and communicate clearly with their students.

Enhancing Critical Thinking Skills and Writing Skills through the Variation in Non-Traditional Writing Task

ERIC Educational Resources Information Center

Sinaga, Parlindungan; Feranie, Shelly

2017-01-01

The research aims to identify the impacts of embedding non-traditional writing tasks within the course of modern physics conducted to the students of Physics Education and Physics Study Programs. It employed a quasi-experimental method with the pretest-posttest control group design. The used instruments were tests on conceptual mastery, tests on…

The Effects of Computerized and Traditional Ear Training Programs on Aural Skills of Elementary Students

ERIC Educational Resources Information Center

Kariuki, Patrick N.; Ross, Zachary R.

2017-01-01

The purpose of this study was to investigate the effects of computerized and traditional ear training methods on the aural skills abilities of elementary music students. The sample consisted of 20 students who were randomly assigned to either an experimental or control group. The experimental group was taught for five sessions using computerized…

A better way to teach knot tying: a randomized controlled trial comparing the kinesthetic and traditional methods.

PubMed

Huang, Emily; Chern, Hueylan; O'Sullivan, Patricia; Cook, Brian; McDonald, Erik; Palmer, Barnard; Liu, Terrence; Kim, Edward

2014-10-01

Knot tying is a fundamental and crucial surgical skill. We developed a kinesthetic pedagogical approach that increases precision and economy of motion by explicitly teaching suture-handling maneuvers and studied its effects on novice performance. Seventy-four first-year medical students were randomized to learn knot tying via either the traditional or the novel "kinesthetic" method. After 1 week of independent practice, students were videotaped performing 4 tying tasks. Three raters scored deidentified videos using a validated visual analog scale. The groups were compared using analysis of covariance with practice knots as a covariate and visual analog scale score (range, 0 to 100) as the dependent variable. Partial eta-square was calculated to indicate effect size. Overall rater reliability was .92. The kinesthetic group scored significantly higher than the traditional group for individual tasks and overall, controlling for practice (all P < .004). The kinesthetic overall mean was 64.15 (standard deviation = 16.72) vs traditional 46.31 (standard deviation = 16.20; P < .001; effect size = .28). For novices, emphasizing kinesthetic suture handling substantively improved performance on knot tying. We believe this effect can be extrapolated to more complex surgical skills. Copyright © 2014 Elsevier Inc. All rights reserved.

Comparing the Effects of Simulation-Based and Traditional Teaching Methods on the Critical Thinking Abilities and Self-Confidence of Nursing Students.

PubMed

Alamrani, Mashael Hasan; Alammar, Kamila Ahmad; Alqahtani, Sarah Saad; Salem, Olfat A

2018-06-01

Critical thinking and self-confidence are imperative to success in clinical practice. Educators should use teaching strategies that will help students enhance their critical thinking and self-confidence in complex content such as electrocardiogram interpretation. Therefore, teaching electrocardiogram interpretation to students is important for nurse educators. This study compares the effect of simulation-based and traditional teaching methods on the critical thinking and self-confidence of students during electrocardiogram interpretation sessions. Thirty undergraduate nursing students volunteered to participate in this study. The participants were divided into intervention and control groups, which were taught respectively using the simulation-based and traditional teaching programs. All of the participants were asked to complete the study instrumentpretest and posttest to measure their critical thinking and self-confidence. Improvement was observed in the control and experimental groups with respect to critical thinking and self-confidence, as evidenced by the results of the paired samples t test and the Wilcoxon signed-rank test (p < .05). However, the independent t test and Mann-Whitney U test indicate that the difference between the two groups was not significant (p > .05). This study evaluated an innovative simulation-based teaching method for nurses. No significant differences in outcomes were identified between the simulator-based and traditional teaching methods, indicating that well-implemented educational programs that use either teaching method effectively promote critical thinking and self-confidence in nursing students. Nurse educators are encouraged to design educational plans with clear objectives to improve the critical thinking and self-confidence of their students. Future research should compare the effects of several teaching sessions using each method in a larger sample.

Mass casualty tracking with air traffic control methodologies.

PubMed

Hoskins, Jason D; Graham, Ross F; Robinson, Duane R; Lutz, Clifford C; Folio, Les R

2009-06-01

An intrahospital casualty throughput system modeled after air traffic control (ATC) tracking procedures was tested in mass casualty exercises. ATC uses a simple tactile process involving informational progress strips representing each aircraft, which are held in bays representing each stage of flight to prioritize and manage aircraft. These strips can be reordered within the bays to indicate a change in priority of aircraft sequence. In this study, a similar system was designed for patient tracking. We compared the ATC model and traditional casualty tracking methods of paper and clipboard in 18 four-hour casualty scenarios, each with 5 to 30 mock casualties. The experimental and control groups were alternated to maximize exposure and minimize training effects. Results were analyzed with Mann-Whitney statistical analysis with p value < 0.05 (two-sided). The ATC method had significantly (p = 0.017) fewer errors in critical patient data (eg, name, social security number, diagnosis). Specifically, the ATC method better tracked the mechanism of injury, working diagnosis, and disposition of patients. The ATC method also performed considerably better with patient accountability during mass casualty scenarios. Data strips were comparable with the control method in terms of ease of use. In addition, participants preferred the ATC method to the control (p = 0.003) and preferred using the ATC method (p = 0.003) to traditional methods in the future. The ATC model more effectively tracked patient data with fewer errors when compared with the clipboard method. Application of these principles can enhance trauma management and can have application in civilian and military trauma centers and emergency rooms.

Traditional use of indigenous mosquito-repellents to protect humans against mosquitoes and other insect bites in a rural community of Cameroon.

PubMed

Ntonifor, N N; Ngufor, C A; Kimbi, H K; Oben, B O

2006-10-01

To document and test the efficacy of indigenous traditional personal protection methods against mosquito bites and general nuisance. A prospective study based on a survey and field evaluation of selected plant-based personal protection methods against mosquito bites. Bolifamba, a rural setting of the Mount Cameroon region. A structured questionnaire was administered to 179 respondents and two anti-mosquito measures were tested under field conditions. Identified traditional anti-mosquito methods used by indigenes of Bolifamba. Two plants tested under field conditions were found to be effective. Of the 179 respondents, 88 (49.16%) used traditional anti-mosquito methods; 57 (64.77%) used plant-based methods while 31 (35.2%) used various petroleum oils. The rest of the respondents, 91 (50.8%) used conventional personal protection methods. Reasons for using traditional methods were because they were available, affordable and lack of known more effective alternatives. The demerits of these methods were: labourious to implement, stain dresses, produce a lot of smoke/ repulsive odours when used; those of conventional methods were lack of adequate information about them, high cost and non-availability. When the two most frequently used plants, Saccharum officinarium and Ocimum basilicum were evaluated under field conditions, each gave a better protection than the control. Most plants used against mosquitoes in the area are known potent mosquito repellents but others identified in the study warrant further research. The two tested under field conditions were effective though less than the commonly used commercial diethyltoluamide.

The effectiveness of an interactive computer program versus traditional lecture in athletic training education.

PubMed

Wiksten, D L; Patterson, P; Antonio, K; De La Cruz, D; Buxton, B P

1998-07-01

To evaluate the effectiveness of an interactive athletic training educational curriculum (IATEC) computer program as compared with traditional lecture instruction. Instructions on assessment of the quadriceps angle (Q-angle) were compared. Dependent measures consisted of cognitive knowledge, practical skill assessment, and attitudes toward the 2 methods of instruction. Sixty-six subjects were selected and then randomly assigned to 3 different groups: traditional lecture, IATEC, and control. The traditional lecture group (n = 22) received a 50-minute lecture/demonstration covering the same instructional content as the Q-angle module of the IATEC program. The IATEC group (n = 20; 2 subjects were dropped from this group due to scheduling conflicts) worked independently for 50 to 65 minutes using the Q-angle module of the IATEC program. The control group (n = 22) received no instruction. Subjects were recruited from an undergraduate athletic training education program and were screened for prior knowledge of the Q-angle. A 9-point multiple choice examination was used to determine cognitive knowledge of the Q-angle. A 12-point yes-no checklist was used to determine whether or not the subjects were able to correctly measure the Q-angle. The Allen Attitude Toward Computer-Assisted Instruction Semantic Differential Survey was used to assess student attitudes toward the 2 methods of instruction. The survey examined overall attitudes, in addition to 3 subscales: comfort, creativity, and function. The survey was scored from 1 to 7, with 7 being the most favorable and 1 being the least favorable. Results of a 1-way ANOVA on cognitive knowledge of the Q-angle revealed that the traditional lecture and IATEC groups performed significantly better than the control group, and the traditional lecture group performed significantly better than the IATEC group. Results of a 1-way ANOVA on practical skill performance revealed that the traditional lecture and IATEC groups performed significantly better than the control group, but there were no significant differences between the traditional lecture and IATEC groups on practical skill performance. Results of a t test indicated significantly more favorable attitudes (P < .05) for the traditional lecture group when compared with the IATEC group for comfort, creativity, and function. Our results suggest that use of the IATEC computer module is an effective means of instruction; however, use of the IATEC program alone may not be sufficient for educating students in cognitive knowledge. Further research is needed to determine the effectiveness of the IATEC computer program as a supplement to traditional lecture instruction in athletic training education.

The Effectiveness of an Interactive Computer Program Versus Traditional Lecture in Athletic Training Education

PubMed Central

Wiksten, Denise Lebsack; Patterson, Patricia; Antonio, Kimberly; De La Cruz, Daniel; Buxton, Barton P.

1998-01-01

Objective: To evaluate the effectiveness of an interactive athletic training educational curriculum (IATEC) computer program as compared with traditional lecture instruction. Instructions on assessment of the quadriceps angle (Q-angle) were compared. Dependent measures consisted of cognitive knowledge, practical skill assessment, and attitudes toward the 2 methods of instruction. Design and Setting: Sixty-six subjects were selected and then randomly assigned to 3 different groups: traditional lecture, IATEC, and control. The traditional lecture group (n = 22) received a 50-minute lecture/demonstration covering the same instructional content as the Q-angle module of the IATEC program. The IATEC group (n = 20; 2 subjects were dropped from this group due to scheduling conflicts) worked independently for 50 to 65 minutes using the Q-angle module of the IATEC program. The control group (n = 22) received no instruction. Subjects: Subjects were recruited from an undergraduate athletic training education program and were screened for prior knowledge of the Q-angle. Measurements: A 9-point multiple choice examination was used to determine cognitive knowledge of the Q-angle. A 12-point yes-no checklist was used to determine whether or not the subjects were able to correctly measure the Q-angle. The Allen Attitude Toward Computer-Assisted Instruction Semantic Differential Survey was used to assess student attitudes toward the 2 methods of instruction. The survey examined overall attitudes, in addition to 3 subscales: comfort, creativity, and function. The survey was scored from 1 to 7, with 7 being the most favorable and 1 being the least favorable. Results: Results of a 1-way ANOVA on cognitive knowledge of the Q-angle revealed that the traditional lecture and IATEC groups performed significantly better than the control group, and the traditional lecture group performed significantly better than the IATEC group. Results of a 1-way ANOVA on practical skill performance revealed that the traditional lecture and IATEC groups performed significantly better than the control group, but there were no significant differences between the traditional lecture and IATEC groups on practical skill performance. Results of a t test indicated significantly more favorable attitudes (P < .05) for the traditional lecture group when compared with the IATEC group for comfort, creativity, and function. Conclusions: Our results suggest that use of the IATEC computer module is an effective means of instruction; however, use of the IATEC program alone may not be sufficient for educating students in cognitive knowledge. Further research is needed to determine the effectiveness of the IATEC computer program as a supplement to traditional lecture instruction in athletic training education. PMID:16558517

An Accurate Transmitting Power Control Method in Wireless Communication Transceivers

NASA Astrophysics Data System (ADS)

Zhang, Naikang; Wen, Zhiping; Hou, Xunping; Bi, Bo

2018-01-01

Power control circuits are widely used in transceivers aiming at stabilizing the transmitted signal power to a specified value, thereby reducing power consumption and interference to other frequency bands. In order to overcome the shortcomings of traditional modes of power control, this paper proposes an accurate signal power detection method by multiplexing the receiver and realizes transmitting power control in the digital domain. The simulation results show that this novel digital power control approach has advantages of small delay, high precision and simplified design procedure. The proposed method is applicable to transceivers working at large frequency dynamic range, and has good engineering practicability.

Pen rearing and imprinting of fall Chinook salmon

USGS Publications Warehouse

Beeman, J.W.; Novotny, J.F.

1994-01-01

Results of rearing upriver bright fall chinook salmon juveniles in net pens and a barrier net enclosure in two backwater areas and a pond along the Columbia River were compared with traditional hatchery methods. Growth, smoltification, and general condition of pen-reared fish receiving supplemental feeding were better than those of fish reared using traditional methods. Juvenile fish receiving no supplemental feeding were generally in poor condition resulting in a net loss of production. Rearing costs using pens were generally lower than in the hatchery. However, low adult returns resulted in greater cost per adult recovery than fish reared and released using traditional methods. Much of the differences in recovery rates may have been due to differences in rearing locations, as study sites were as much as 128 mi upstream from the hatcheries and study fish may have incurred higher mortality associated with downstream migration than control fish. Fish reared using these methods could be a cost-effective method of enhancing salmon production in the Columbia River Basin.

Algorithms for Efficient Computation of Transfer Functions for Large Order Flexible Systems

NASA Technical Reports Server (NTRS)

Maghami, Peiman G.; Giesy, Daniel P.

1998-01-01

An efficient and robust computational scheme is given for the calculation of the frequency response function of a large order, flexible system implemented with a linear, time invariant control system. Advantage is taken of the highly structured sparsity of the system matrix of the plant based on a model of the structure using normal mode coordinates. The computational time per frequency point of the new computational scheme is a linear function of system size, a significant improvement over traditional, still-matrix techniques whose computational times per frequency point range from quadratic to cubic functions of system size. This permits the practical frequency domain analysis of systems of much larger order than by traditional, full-matrix techniques. Formulations are given for both open- and closed-loop systems. Numerical examples are presented showing the advantages of the present formulation over traditional approaches, both in speed and in accuracy. Using a model with 703 structural modes, the present method was up to two orders of magnitude faster than a traditional method. The present method generally showed good to excellent accuracy throughout the range of test frequencies, while traditional methods gave adequate accuracy for lower frequencies, but generally deteriorated in performance at higher frequencies with worst case errors being many orders of magnitude times the correct values.

[Development ideas of fine pharmaceutical materials of traditional Chinese medicine preparations based on active cluster theory].

PubMed

Ke, Zhong-Cheng; Hou, Xue-Feng; Jia, Xiao-Bin

2016-07-01

The pharmaceutical materials are divided into coarse and fine types in the development of traditional Chinese medicine preparations. Fine materials with clear composition, stable content and high quality control conform to the international development trend of traditional Chinese medicine preparations. In this paper, the status of fine materials was analyzed, and the development ideas were tentatively put forward. On the one hand, the study on simple methods and efficient equipment shall be strengthened for the simultaneous separation of multiple components of traditional Chinese medicine; on the other hand, the knowledge for traditional Chinese medicine shall be broadened to further develop the scientific compatibility of monomers under the guidance of the theory of traditional Chinese medicine. Copyright© by the Chinese Pharmaceutical Association.

Localization of an Underwater Control Network Based on Quasi-Stable Adjustment.

PubMed

Zhao, Jianhu; Chen, Xinhua; Zhang, Hongmei; Feng, Jie

2018-03-23

There exists a common problem in the localization of underwater control networks that the precision of the absolute coordinates of known points obtained by marine absolute measurement is poor, and it seriously affects the precision of the whole network in traditional constraint adjustment. Therefore, considering that the precision of underwater baselines is good, we use it to carry out quasi-stable adjustment to amend known points before constraint adjustment so that the points fit the network shape better. In addition, we add unconstrained adjustment for quality control of underwater baselines, the observations of quasi-stable adjustment and constrained adjustment, to eliminate the unqualified baselines and improve the results' accuracy of the two adjustments. Finally, the modified method is applied to a practical LBL (Long Baseline) experiment and obtains a mean point location precision of 0.08 m, which improves by 38% compared with the traditional method.

Localization of an Underwater Control Network Based on Quasi-Stable Adjustment

PubMed Central

Chen, Xinhua; Zhang, Hongmei; Feng, Jie

2018-01-01

There exists a common problem in the localization of underwater control networks that the precision of the absolute coordinates of known points obtained by marine absolute measurement is poor, and it seriously affects the precision of the whole network in traditional constraint adjustment. Therefore, considering that the precision of underwater baselines is good, we use it to carry out quasi-stable adjustment to amend known points before constraint adjustment so that the points fit the network shape better. In addition, we add unconstrained adjustment for quality control of underwater baselines, the observations of quasi-stable adjustment and constrained adjustment, to eliminate the unqualified baselines and improve the results’ accuracy of the two adjustments. Finally, the modified method is applied to a practical LBL (Long Baseline) experiment and obtains a mean point location precision of 0.08 m, which improves by 38% compared with the traditional method. PMID:29570627

Design, test, and evaluation of three active flutter suppression controllers

NASA Technical Reports Server (NTRS)

Adams, William M., Jr.; Christhilf, David M.; Waszak, Martin R.; Mukhopadhyay, Vivek; Srinathkumar, S.

1992-01-01

Three control law design techniques for flutter suppression are presented. Each technique uses multiple control surfaces and/or sensors. The first method uses traditional tools (such as pole/zero loci and Nyquist diagrams) for producing a controller that has minimal complexity and which is sufficiently robust to handle plant uncertainty. The second procedure uses linear combinations of several accelerometer signals and dynamic compensation to synthesize the model rate of the critical mode for feedback to the distributed control surfaces. The third technique starts with a minimum-energy linear quadratic Gaussian controller, iteratively modifies intensity matrices corresponding to input and output noise, and applies controller order reduction to achieve a low-order, robust controller. The resulting designs were implemented digitally and tested subsonically on the active flexible wing wind-tunnel model in the Langley Transonic Dynamics Tunnel. Only the traditional pole/zero loci design was sufficiently robust to errors in the nominal plant to successfully suppress flutter during the test. The traditional pole/zero loci design provided simultaneous suppression of symmetric and antisymmetric flutter with a 24-percent increase in attainable dynamic pressure. Posttest analyses are shown which illustrate the problems encountered with the other laws.

Reformulation of Traditional Chamomile Oil: Quality Controls and Fingerprint Presentation Based on Cluster Analysis of Attenuated Total Reflectance–Infrared Spectral Data

PubMed Central

Sakhteman, Amirhossein; Faridi, Pouya; Daneshamouz, Saeid; Akbarizadeh, Amin Reza; Borhani-Haghighi, Afshin; Mohagheghzadeh, Abdolali

2017-01-01

Herbal oils have been widely used in Iran as medicinal compounds dating back to thousands of years in Iran. Chamomile oil is widely used as an example of traditional oil. We remade chamomile oils and tried to modify it with current knowledge and facilities. Six types of oil (traditional and modified) were prepared. Microbial limit tests and physicochemical tests were performed on them. Also, principal component analysis, hierarchical cluster analysis, and partial least squares discriminant analysis were done on the spectral data of attenuated total reflectance–infrared in order to obtain insight based on classification pattern of the samples. The results show that we can use modified versions of the chamomile oils (modified Clevenger-type apparatus method and microwave method) with the same content of traditional ones and with less microbial contaminations and better physicochemical properties. PMID:28585466

Reformulation of Traditional Chamomile Oil: Quality Controls and Fingerprint Presentation Based on Cluster Analysis of Attenuated Total Reflectance-Infrared Spectral Data.

PubMed

Zargaran, Arman; Sakhteman, Amirhossein; Faridi, Pouya; Daneshamouz, Saeid; Akbarizadeh, Amin Reza; Borhani-Haghighi, Afshin; Mohagheghzadeh, Abdolali

2017-10-01

Herbal oils have been widely used in Iran as medicinal compounds dating back to thousands of years in Iran. Chamomile oil is widely used as an example of traditional oil. We remade chamomile oils and tried to modify it with current knowledge and facilities. Six types of oil (traditional and modified) were prepared. Microbial limit tests and physicochemical tests were performed on them. Also, principal component analysis, hierarchical cluster analysis, and partial least squares discriminant analysis were done on the spectral data of attenuated total reflectance-infrared in order to obtain insight based on classification pattern of the samples. The results show that we can use modified versions of the chamomile oils (modified Clevenger-type apparatus method and microwave method) with the same content of traditional ones and with less microbial contaminations and better physicochemical properties.

Using a topographic index to distribute variable source area runoff predicted with the SCS curve-number equation

NASA Astrophysics Data System (ADS)

Lyon, Steve W.; Walter, M. Todd; Gérard-Marchant, Pierre; Steenhuis, Tammo S.

2004-10-01

Because the traditional Soil Conservation Service curve-number (SCS-CN) approach continues to be used ubiquitously in water quality models, new application methods are needed that are consistent with variable source area (VSA) hydrological processes in the landscape. We developed and tested a distributed approach for applying the traditional SCS-CN equation to watersheds where VSA hydrology is a dominant process. Predicting the location of source areas is important for watershed planning because restricting potentially polluting activities from runoff source areas is fundamental to controlling non-point-source pollution. The method presented here used the traditional SCS-CN approach to predict runoff volume and spatial extent of saturated areas and a topographic index, like that used in TOPMODEL, to distribute runoff source areas through watersheds. The resulting distributed CN-VSA method was applied to two subwatersheds of the Delaware basin in the Catskill Mountains region of New York State and one watershed in south-eastern Australia to produce runoff-probability maps. Observed saturated area locations in the watersheds agreed with the distributed CN-VSA method. Results showed good agreement with those obtained from the previously validated soil moisture routing (SMR) model. When compared with the traditional SCS-CN method, the distributed CN-VSA method predicted a similar total volume of runoff, but vastly different locations of runoff generation. Thus, the distributed CN-VSA approach provides a physically based method that is simple enough to be incorporated into water quality models, and other tools that currently use the traditional SCS-CN method, while still adhering to the principles of VSA hydrology.

The impact of blended teaching on knowledge, satisfaction, and self-directed learning in nursing undergraduates: a randomized, controlled trial.

PubMed

Gagnon, Marie-Pierre; Gagnon, Johanne; Desmartis, Marie; Njoya, Merlin

2013-01-01

This study aimed to assess the effectiveness of a blended-teaching intervention using Internet-based tutorials coupled with traditional lectures in an introduction to research undergraduate nursing course. Effects of the intervention were compared with conventional, face-to-face classroom teaching on three outcomes: knowledge, satisfaction, and self-learning readiness. A two-group, randomized, controlled design was used, involving 112 participants. Descriptive statistics and analysis of covariance (ANCOVA) were performed. The teaching method was found to have no direct impact on knowledge acquisition, satisfaction, and self-learning readiness. However, motivation and teaching method had an interaction effect on knowledge acquisition by students. Among less motivated students, those in the intervention group performed better than those who received traditional training. These findings suggest that this blended-teaching method could better suit some students, depending on their degree of motivation and level of self-directed learning readiness.

Pain and efficacy rating of a microprocessor-controlled metered injection system for local anaesthesia in minor hand surgery.

PubMed

Nimigan, André S; Gan, Bing Siang

2011-01-01

Purpose. Little attention has been given to syringe design and local anaesthetic administration methods. A microprocessor-controlled anaesthetic delivery device has become available that may minimize discomfort during injection. The purpose of this study was to document the pain experience associated with the use of this system and to compare it with use of a conventional syringe. Methods. A prospective, randomized clinical trial was designed. 40 patients undergoing carpal tunnel release were block randomized according to sex into a two groups: a traditional syringe group and a microprocessor-controlled device group. The primary outcome measure was surgical pain and local anaesthetic administration pain. Secondary outcomes included volume of anaesthetic used and injection time. Results. Analysis showed that equivalent anaesthesia was achieved in the microprocessor-controlled group despite using a significantly lower volume of local anaesthetic (P = .0002). This same group, however, has significantly longer injection times (P < .0001). Pain during the injection process or during surgery was not different between the two groups. Conclusions. This RCT comparing traditional and microprocessor controlled methods of administering local anaesthetic showed similar levels of discomfort in both groups. While the microprocessor-controlled group used less volume, the total time for the administration was significantly greater.

Fast and Accurate Microplate Method (Biolog MT2) for Detection of Fusarium Fungicides Resistance/Sensitivity.

PubMed

Frąc, Magdalena; Gryta, Agata; Oszust, Karolina; Kotowicz, Natalia

2016-01-01

The need for finding fungicides against Fusarium is a key step in the chemical plant protection and using appropriate chemical agents. Existing, conventional methods of evaluation of Fusarium isolates resistance to fungicides are costly, time-consuming and potentially environmentally harmful due to usage of high amounts of potentially toxic chemicals. Therefore, the development of fast, accurate and effective detection methods for Fusarium resistance to fungicides is urgently required. MT2 microplates (Biolog(TM)) method is traditionally used for bacteria identification and the evaluation of their ability to utilize different carbon substrates. However, to the best of our knowledge, there is no reports concerning the use of this technical tool to determine fungicides resistance of the Fusarium isolates. For this reason, the objectives of this study are to develop a fast method for Fusarium resistance to fungicides detection and to validate the effectiveness approach between both traditional hole-plate and MT2 microplates assays. In presented study MT2 microplate-based assay was evaluated for potential use as an alternative resistance detection method. This was carried out using three commercially available fungicides, containing following active substances: triazoles (tebuconazole), benzimidazoles (carbendazim) and strobilurins (azoxystrobin), in six concentrations (0, 0.0005, 0.005, 0.05, 0.1, 0.2%), for nine selected Fusarium isolates. In this study, the particular concentrations of each fungicides was loaded into MT2 microplate wells. The wells were inoculated with the Fusarium mycelium suspended in PM4-IF inoculating fluid. Before inoculation the suspension was standardized for each isolates into 75% of transmittance. Traditional hole-plate method was used as a control assay. The fungicides concentrations in control method were the following: 0, 0.0005, 0.005, 0.05, 0.5, 1, 2, 5, 10, 25, and 50%. Strong relationships between MT2 microplate and traditional hole-plate methods were observed regarding to the detection of Fusarium resistance to various fungicides and their concentrations. The tebuconazole was most potent, providing increased efficiency in the growth inhibition of all tested isolates. Almost all among tested isolates were resistant to azoxystrobin-based fungicide. Overall, the MT2 microplates method was effective and timesaving, alternative method for determining Fusarium resistance/sensitivity to fungicides, compering to traditional hole-plate approach.

Fast and Accurate Microplate Method (Biolog MT2) for Detection of Fusarium Fungicides Resistance/Sensitivity

PubMed Central

Frąc, Magdalena; Gryta, Agata; Oszust, Karolina; Kotowicz, Natalia

2016-01-01

The need for finding fungicides against Fusarium is a key step in the chemical plant protection and using appropriate chemical agents. Existing, conventional methods of evaluation of Fusarium isolates resistance to fungicides are costly, time-consuming and potentially environmentally harmful due to usage of high amounts of potentially toxic chemicals. Therefore, the development of fast, accurate and effective detection methods for Fusarium resistance to fungicides is urgently required. MT2 microplates (BiologTM) method is traditionally used for bacteria identification and the evaluation of their ability to utilize different carbon substrates. However, to the best of our knowledge, there is no reports concerning the use of this technical tool to determine fungicides resistance of the Fusarium isolates. For this reason, the objectives of this study are to develop a fast method for Fusarium resistance to fungicides detection and to validate the effectiveness approach between both traditional hole-plate and MT2 microplates assays. In presented study MT2 microplate-based assay was evaluated for potential use as an alternative resistance detection method. This was carried out using three commercially available fungicides, containing following active substances: triazoles (tebuconazole), benzimidazoles (carbendazim) and strobilurins (azoxystrobin), in six concentrations (0, 0.0005, 0.005, 0.05, 0.1, 0.2%), for nine selected Fusarium isolates. In this study, the particular concentrations of each fungicides was loaded into MT2 microplate wells. The wells were inoculated with the Fusarium mycelium suspended in PM4-IF inoculating fluid. Before inoculation the suspension was standardized for each isolates into 75% of transmittance. Traditional hole-plate method was used as a control assay. The fungicides concentrations in control method were the following: 0, 0.0005, 0.005, 0.05, 0.5, 1, 2, 5, 10, 25, and 50%. Strong relationships between MT2 microplate and traditional hole-plate methods were observed regarding to the detection of Fusarium resistance to various fungicides and their concentrations. The tebuconazole was most potent, providing increased efficiency in the growth inhibition of all tested isolates. Almost all among tested isolates were resistant to azoxystrobin-based fungicide. Overall, the MT2 microplates method was effective and timesaving, alternative method for determining Fusarium resistance/sensitivity to fungicides, compering to traditional hole-plate approach. PMID:27092136

Traditional and non-traditional treatments for autism spectrum disorder with seizures: an on-line survey

PubMed Central

2011-01-01

Background Despite the high prevalence of seizure, epilepsy and abnormal electroencephalograms in individuals with autism spectrum disorder (ASD), there is little information regarding the relative effectiveness of treatments for seizures in the ASD population. In order to determine the effectiveness of traditional and non-traditional treatments for improving seizures and influencing other clinical factor relevant to ASD, we developed a comprehensive on-line seizure survey. Methods Announcements (by email and websites) by ASD support groups asked parents of children with ASD to complete the on-line surveys. Survey responders choose one of two surveys to complete: a survey about treatments for individuals with ASD and clinical or subclinical seizures or abnormal electroencephalograms, or a control survey for individuals with ASD without clinical or subclinical seizures or abnormal electroencephalograms. Survey responders rated the perceived effect of traditional antiepileptic drug (AED), non-AED seizure treatments and non-traditional ASD treatments on seizures and other clinical factors (sleep, communication, behavior, attention and mood), and listed up to three treatment side effects. Results Responses were obtained concerning 733 children with seizures and 290 controls. In general, AEDs were perceived to improve seizures but worsened other clinical factors for children with clinical seizure. Valproic acid, lamotrigine, levetiracetam and ethosuximide were perceived to improve seizures the most and worsen other clinical factors the least out of all AEDs in children with clinical seizures. Traditional non-AED seizure and non-traditional treatments, as a group, were perceived to improve other clinical factors and seizures but the perceived improvement in seizures was significantly less than that reported for AEDs. Certain traditional non-AED treatments, particularly the ketogenic diet, were perceived to improve both seizures and other clinical factors. For ASD individuals with reported subclinical seizures, other clinical factors were reported to be worsened by AEDs and improved by non-AED traditional seizure and non-traditional treatments. The rate of side effects was reportedly higher for AEDs compared to traditional non-AED treatments. Conclusion Although this survey-based method only provides information regarding parental perceptions of effectiveness, this information may be helpful for selecting seizure treatments in individuals with ASD. PMID:21592359

Application of adjusted subpixel method (ASM) in HRCT measurements of the bronchi in bronchial asthma patients and healthy individuals.

PubMed

Mincewicz, Grzegorz; Rumiński, Jacek; Krzykowski, Grzegorz

2012-02-01

Recently, we described a model system which included corrections of high-resolution computed tomography (HRCT) bronchial measurements based on the adjusted subpixel method (ASM). To verify the clinical application of ASM by comparing bronchial measurements obtained by means of the traditional eye-driven method, subpixel method alone and ASM in a group comprised of bronchial asthma patients and healthy individuals. The study included 30 bronchial asthma patients and the control group comprised of 20 volunteers with no symptoms of asthma. The lowest internal and external diameters of the bronchial cross-sections (ID and ED) and their derivative parameters were determined in HRCT scans using: (1) traditional eye-driven method, (2) subpixel technique, and (3) ASM. In the case of the eye-driven method, lower ID values along with lower bronchial lumen area and its percentage ratio to total bronchial area were basic parameters that differed between asthma patients and healthy controls. In the case of the subpixel method and ASM, both groups were not significantly different in terms of ID. Significant differences were observed in values of ED and total bronchial area with both parameters being significantly higher in asthma patients. Compared to ASM, the eye-driven method overstated the values of ID and ED by about 30% and 10% respectively, while understating bronchial wall thickness by about 18%. Results obtained in this study suggest that the traditional eye-driven method of HRCT-based measurement of bronchial tree components probably overstates the degree of bronchial patency in asthma patients. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Problem-Based Learning Method: Secondary Education 10th Grade Chemistry Course Mixtures Topic

ERIC Educational Resources Information Center

Üce, Musa; Ates, Ismail

2016-01-01

In this research; aim was determining student achievement by comparing problem-based learning method with teacher-centered traditional method of teaching 10th grade chemistry lesson mixtures topic. Pretest-posttest control group research design is implemented. Research sample includes; two classes of (total of 48 students) an Anatolian High School…

[Application of traditional Chinese medicine reference standards in quality control of Chinese herbal pieces].

PubMed

Lu, Tu-Lin; Li, Jin-Ci; Yu, Jiang-Yong; Cai, Bao-Chang; Mao, Chun-Qin; Yin, Fang-Zhou

2014-01-01

Traditional Chinese medicine (TCM) reference standards plays an important role in the quality control of Chinese herbal pieces. This paper overviewed the development of TCM reference standards. By analyzing the 2010 edition of Chinese pharmacopoeia, the application of TCM reference standards in the quality control of Chinese herbal pieces was summarized, and the problems exiting in the system were put forward. In the process of improving the quality control level of Chinese herbal pieces, various kinds of advanced methods and technology should be used to research the characteristic reference standards of Chinese herbal pieces, more and more reasonable reference standards should be introduced in the quality control system of Chinese herbal pieces. This article discussed the solutions in the aspect of TCM reference standards, and future development of quality control on Chinese herbal pieces is prospected.

Development and Effectiveness of an Educational Card Game as Supplementary Material in Understanding Selected Topics in Biology

PubMed Central

Gutierrez, Arnel F.

2014-01-01

The complex concepts and vocabulary of biology classes discourage many students. In this study, a pretest–posttest model was used to test the effectiveness of an educational card game in reinforcing biological concepts in comparison with traditional teaching methods. The subjects of this study were two biology classes at Bulacan State University–Sarmiento Campus. Both classes received conventional instruction; however, the experimental group's instruction was supplemented with the card game, while the control group's instruction was reinforced with traditional exercises and assignments. The score increases from pretest to posttest showed that both methods effectively reinforced biological concepts, but a t test showed that the card game is more effective than traditional teaching methods. Additionally, students from the experimental group evaluated the card game using five criteria: goals, design, organization, playability, and usefulness. The students rated the material very satisfactory. PMID:24591506

Development and effectiveness of an educational card game as supplementary material in understanding selected topics in biology.

PubMed

Gutierrez, Arnel F

2014-01-01

The complex concepts and vocabulary of biology classes discourage many students. In this study, a pretest-posttest model was used to test the effectiveness of an educational card game in reinforcing biological concepts in comparison with traditional teaching methods. The subjects of this study were two biology classes at Bulacan State University-Sarmiento Campus. Both classes received conventional instruction; however, the experimental group's instruction was supplemented with the card game, while the control group's instruction was reinforced with traditional exercises and assignments. The score increases from pretest to posttest showed that both methods effectively reinforced biological concepts, but a t test showed that the card game is more effective than traditional teaching methods. Additionally, students from the experimental group evaluated the card game using five criteria: goals, design, organization, playability, and usefulness. The students rated the material very satisfactory.

Research and application of non-traditional chemical stabilizers on bauxite residue (red sand) dust control, a review.

PubMed

Xu, Guang; Ding, Xuhan; Kuruppu, Mahinda; Zhou, Wei; Biswas, Wahidul

2018-03-01

Bauxite residue is a by-product of aluminium processing. It is usually stored in large-scale residue drying area (RDA). The bauxite residue is highly alkaline and contains a large percentage of metal oxides which are hazardous to the environment and human health. Therefore, the generated dust is a major environmental concern that needs to be addressed and efficiently managed. One of the major dust generation sources is from the coarse fraction of the bauxite residue named red sand. To minimize the environmental and health impacts, non-traditional chemical stabilizers can be applied to construct a binding surface crust with certain hardness and strength. Dust emission is reduced due to the increased moisture retention capacity and strong cohesion between sand particles. There are limited number of refereed publications that discuss the application of this method to alleviate dust generation from red sand. By critically reviewing the literature and the application of non-traditional chemical stabilizers to sand-like materials in other fields, this paper introduces some non-traditional chemical stabilizers that can be potentially used for controlling red sand dust. Commonly used evaluation methods in various studies are compared and summarized; the stabilization mechanisms are examined; and the performance of three types of stabilizers are compared and evaluated. This review potentially serves as a reference and guide for further studies in red sand dust control. The findings are especially useful for developing suitable quantitative methods for evaluating the dust suppression efficiency of soil stabilizers, and for determining the appropriate additive quantities that achieve both economic and performance effectiveness. Copyright © 2017 Elsevier B.V. All rights reserved.

Study on model current predictive control method of PV grid- connected inverters systems with voltage sag

NASA Astrophysics Data System (ADS)

Jin, N.; Yang, F.; Shang, S. Y.; Tao, T.; Liu, J. S.

2016-08-01

According to the limitations of the LVRT technology of traditional photovoltaic inverter existed, this paper proposes a low voltage ride through (LVRT) control method based on model current predictive control (MCPC). This method can effectively improve the photovoltaic inverter output characteristics and response speed. The MCPC method of photovoltaic grid-connected inverter designed, the sum of the absolute value of the predictive current and the given current error is adopted as the cost function with the model predictive control method. According to the MCPC, the optimal space voltage vector is selected. Photovoltaic inverter has achieved automatically switches of priority active or reactive power control of two control modes according to the different operating states, which effectively improve the inverter capability of LVRT. The simulation and experimental results proves that the proposed method is correct and effective.

Towards Validation of an Adaptive Flight Control Simulation Using Statistical Emulation

NASA Technical Reports Server (NTRS)

He, Yuning; Lee, Herbert K. H.; Davies, Misty D.

2012-01-01

Traditional validation of flight control systems is based primarily upon empirical testing. Empirical testing is sufficient for simple systems in which a.) the behavior is approximately linear and b.) humans are in-the-loop and responsible for off-nominal flight regimes. A different possible concept of operation is to use adaptive flight control systems with online learning neural networks (OLNNs) in combination with a human pilot for off-nominal flight behavior (such as when a plane has been damaged). Validating these systems is difficult because the controller is changing during the flight in a nonlinear way, and because the pilot and the control system have the potential to co-adapt in adverse ways traditional empirical methods are unlikely to provide any guarantees in this case. Additionally, the time it takes to find unsafe regions within the flight envelope using empirical testing means that the time between adaptive controller design iterations is large. This paper describes a new concept for validating adaptive control systems using methods based on Bayesian statistics. This validation framework allows the analyst to build nonlinear models with modal behavior, and to have an uncertainty estimate for the difference between the behaviors of the model and system under test.

[Study on material base of Carthamus tinctorius with antioxidant effect based on selective knock-out].

PubMed

Wang, Lin-Yan; Tang, Yu-Ping; Liu, Xin; Ge, Ya-Hui; Li, Shu-Jiao; Shang, Er-Xin; Duan, Jin-Ao

2014-04-01

To establish a method for studying efficacious materials of traditional Chinese medicines from an overall perspective. Carthamus tinctorius was taken the example. Its major components were depleted by preparing liquid chromatography. Afterwards, the samples with major components depleted were evaluated for their antioxidant effect, so as to compare and analyze the major efficacious materials of C. tinctorius with antioxidant activity and the contributions. Seven major components were depleted from C. tinctorius samples, and six of them were identified with MS data and control comparison. After all of the samples including depleted materials are compared and evaluated for their antioxidant effect, the findings showed that hydroxysafflor yellow A, anhydrosafflor yellow B and 6-hydroxykaempferol-3, 6-di-O-glucoside-7-O-glucuronide were the major efficacious materials. This study explored a novel and effective method for studying efficacious materials of traditional Chinese medicines. Through this method, we could explain the direct and indirect contributions of different components to the efficacy of traditional Chinese medicines, and make the efficacious material expression of traditional Chinese medicines clearer.

Pattern Recognition Control Design

NASA Technical Reports Server (NTRS)

Gambone, Elisabeth

2016-01-01

Spacecraft control algorithms must know the expected spacecraft response to any command to the available control effectors, such as reaction thrusters or torque devices. Spacecraft control system design approaches have traditionally relied on the estimated vehicle mass properties to determine the desired force and moment, as well as knowledge of the effector performance to efficiently control the spacecraft. A pattern recognition approach can be used to investigate the relationship between the control effector commands and the spacecraft responses. Instead of supplying the approximated vehicle properties and the effector performance characteristics, a database of information relating the effector commands and the desired vehicle response can be used for closed-loop control. A Monte Carlo simulation data set of the spacecraft dynamic response to effector commands can be analyzed to establish the influence a command has on the behavior of the spacecraft. A tool developed at NASA Johnson Space Center (Ref. 1) to analyze flight dynamics Monte Carlo data sets through pattern recognition methods can be used to perform this analysis. Once a comprehensive data set relating spacecraft responses with commands is established, it can be used in place of traditional control laws and gains set. This pattern recognition approach can be compared with traditional control algorithms to determine the potential benefits and uses.

Bridging the clinician/researcher gap with systemic research: the case for process research, dyadic, and sequential analysis.

PubMed

Oka, Megan; Whiting, Jason

2013-01-01

In Marriage and Family Therapy (MFT), as in many clinical disciplines, concern surfaces about the clinician/researcher gap. This gap includes a lack of accessible, practical research for clinicians. MFT clinical research often borrows from the medical tradition of randomized control trials, which typically use linear methods, or follow procedures distanced from "real-world" therapy. We review traditional research methods and their use in MFT and propose increased use of methods that are more systemic in nature and more applicable to MFTs: process research, dyadic data analysis, and sequential analysis. We will review current research employing these methods, as well as suggestions and directions for further research. © 2013 American Association for Marriage and Family Therapy.

Simultaneous quantification of five major active components in capsules of the traditional Chinese medicine ‘Shu-Jin-Zhi-Tong’ by high performance liquid chromatography

PubMed Central

Yang, Xing-Xin; Zhang, Xiao-Xia; Chang, Rui-Miao; Wang, Yan-Wei; Li, Xiao-Ni

2011-01-01

A simple and reliable high performance liquid chromatography (HPLC) method has been developed for the simultaneous quantification of five major bioactive components in ‘Shu-Jin-Zhi-Tong’ capsules (SJZTC), for the purposes of quality control of this commonly prescribed traditional Chinese medicine. Under the optimum conditions, excellent separation was achieved, and the assay was fully validated in terms of linearity, precision, repeatability, stability and accuracy. The validated method was applied successfully to the determination of the five compounds in SJZTC samples from different production batches. The HPLC method can be used as a valid analytical method to evaluate the intrinsic quality of SJZTC. PMID:29403711

Hands-On Hydroponics

ERIC Educational Resources Information Center

Carver, Jeffrey; Wasserman, Bradley

2012-01-01

Hydroponics is a process in which plants are grown using nutrient-rich water instead of soil. Because this process maximizes the use of water and nutrients--providing only what the plant uses in controlled and easily maintained systems--it is a viable alternative to traditional farming methods. The amount of control in these systems also ensures…

Living Nanocrystals: Synthesis of Precisely Defined Metal Oxide Nanocrystals Through a Continuous Growth Process

NASA Astrophysics Data System (ADS)

Jansons, Adam Wayne

Colloidal nanocrystals offer new and improved performance in applications as well as less environmental impact when compared to traditional device fabrication methods. The important properties that enable improved applications are a direct result of nanocrystal structure. While there have been many great advances in the production of colloidal nanocrystals over the past three decades, precise, atomic-level control of the size, composition, and structure of the inorganic core remains challenging. Rather than dictate these material aspects through traditional synthetic routes, this dissertation details the development and exploitation of a colloidal nanocrystal synthetic method inspired by polymerization reactions. Living polymerization reactions offer precise control of polymer size and structure and have tremendously advanced polymer science, allowing the intuitive production of polymers and block co-polymers of well-defined molecular weights. Similarly, living nanocrystal synthetic methods allow an enhanced level of structural control, granting the synthesis of binary, doped, and core/shell nanocrystals of well-defined size, composition, and structure. This improved control in turn grants enhanced nanocrystal property performance and deepens our understanding of structure/property relationships. This dissertation defines living nanocrystal growth and demonstrates the potential of the living methods in the colloidal production of oxide nanocrystals. After a brief introduction, living growth is defined and discussed in the context of synthetic prerequisites, attributes, and outcomes. Living growth is also compared to more traditional colloidal nanocrystal synthetic methods. The following chapters then demonstrate the precise control living approaches offer in three separate studies; the first highlights sub-nanometer control of nanocrystal size from 2-22+ nm in diameter. Next the improvement in nanocrystal composition is illustrated using several transition metal dopants into an oxide nanocrystal matrix at near thermodynamically allowed compositions. Additionally, precise radial dopant placement is demonstrated, which has striking implications for material properties. The radial position of tin in tin-doped indium oxide nanocrystals and the resulting differences on the localized surface plasmon resonance are discussed. Finally, future opportunities are reviewed. This dissertation includes previously published co-authored material.

The Effects of Total Physical Response by Storytelling and the Traditional Teaching Styles of a Foreign Language in a Selected High School

ERIC Educational Resources Information Center

Kariuki, Patrick N. K.; Bush, Elizabeth Danielle

2008-01-01

The purpose of this study was to examine the effects of Total Physical Response by Storytelling and the traditional teaching method on a foreign language in a selected high school. The sample consisted of 30 students who were randomly selected and randomly assigned to experimental and control group. The experimental group was taught using Total…

Hyperactivity of the default-mode network in first-episode, drug-naive schizophrenia at rest revealed by family-based case-control and traditional case-control designs.

PubMed

Guo, Wenbin; Liu, Feng; Chen, Jindong; Wu, Renrong; Li, Lehua; Zhang, Zhikun; Chen, Huafu; Zhao, Jingping

2017-03-01

Abnormal regional activity and functional connectivity of the default-mode network (DMN) have been reported in schizophrenia. However, previous studies may have been biased by unmatched case-control design. To limit such bias, the present study used both the family-based case-control design and the traditional case-control design to investigate abnormal regional activity of the DMN in patients with schizophrenia at rest.Twenty-eight first-episode, drug-naive patients with schizophrenia, 28 age-, sex-matched unaffected siblings of the patients (family-based controls, FBC), and 40 healthy controls (HC) underwent resting-state functional magnetic resonance imaging (fMRI) scans. The group-independent component analysis and fractional amplitude of low-frequency fluctuation (fALFF) methods were used to analyze the data.Patients with schizophrenia show increased fALFF in an overlapped region of the right superior medial prefrontal cortex (MPFC) relative to the FBC and the HC. Compared with the HC, the patients and the FBC exhibit increased fALFF in an overlapped region of the left posterior cingulate cortex/precuneus (PCC/PCu). Furthermore, the z values of the 2 overlapped regions can separate the patients from the FBC/HC, and separate the patients/FBC from the HC with relatively high sensitivity and specificity.Both the family-based case-control and traditional case-control designs reveal hyperactivity of the DMN in first-episode, drug-naive patients with paranoid schizophrenia, which highlights the importance of the DMN in the neurobiology of schizophrenia. Family-based case-control design can limit the confounding effects of environmental factors in schizophrenia. Combination of the family-based case-control and traditional case-control designs may be a viable option for the neuroimaging studies.

Integration of Traditional and E-Learning Methods to Improve Learning Outcomes for Dental Students in Histopathology.

PubMed

Ariana, Armin; Amin, Moein; Pakneshan, Sahar; Dolan-Evans, Elliot; Lam, Alfred K

2016-09-01

Dental students require a basic ability to explain and apply general principles of pathology to systemic, dental, and oral pathology. Although there have been recent advances in electronic and online resources, the academic effectiveness of using self-directed e-learning tools in pathology courses for dental students is unclear. The aim of this study was to determine if blended learning combining e-learning with traditional learning methods of lectures and tutorials would improve students' scores and satisfaction over those who experienced traditional learning alone. Two consecutive cohorts of Bachelor of Dentistry and Oral Health students taking the general pathology course at Griffith University in Australia were compared. The control cohort experienced traditional methods only, while members of the study cohort were also offered self-directed learning materials including online resources and online microscopy classes. Final assessments for the course were used to compare the differences in effectiveness of the intervention, and students' satisfaction with the teaching format was evaluated using questionnaires. On the final course assessments, students in the study cohort had significantly higher scores than students in the control cohort (p<0.01). Analysis of questionnaire results showed improved student satisfaction with the course in the study cohort. These findings suggest that the use of e-learning tools such as virtual microscopy and interactive online resources for delivering pathology instruction can be an effective supplement for developing dental students' competence, confidence, and satisfaction.

Control mechanism of double-rotator-structure ternary optical computer

NASA Astrophysics Data System (ADS)

Kai, SONG; Liping, YAN

2017-03-01

Double-rotator-structure ternary optical processor (DRSTOP) has two characteristics, namely, giant data-bits parallel computing and reconfigurable processor, which can handle thousands of data bits in parallel, and can run much faster than computers and other optical computer systems so far. In order to put DRSTOP into practical application, this paper established a series of methods, namely, task classification method, data-bits allocation method, control information generation method, control information formatting and sending method, and decoded results obtaining method and so on. These methods form the control mechanism of DRSTOP. This control mechanism makes DRSTOP become an automated computing platform. Compared with the traditional calculation tools, DRSTOP computing platform can ease the contradiction between high energy consumption and big data computing due to greatly reducing the cost of communications and I/O. Finally, the paper designed a set of experiments for DRSTOP control mechanism to verify its feasibility and correctness. Experimental results showed that the control mechanism is correct, feasible and efficient.

Path Planning for Robot based on Chaotic Artificial Potential Field Method

NASA Astrophysics Data System (ADS)

Zhang, Cheng

2018-03-01

Robot path planning in unknown environments is one of the hot research topics in the field of robot control. Aiming at the shortcomings of traditional artificial potential field methods, we propose a new path planning for Robot based on chaotic artificial potential field method. The path planning adopts the potential function as the objective function and introduces the robot direction of movement as the control variables, which combines the improved artificial potential field method with chaotic optimization algorithm. Simulations have been carried out and the results demonstrate that the superior practicality and high efficiency of the proposed method.

[Case-control study on comprehensive traditional Chinese medicine therapy for preventing postsurgery stiffness after operation for terrible triad of the elbow].

PubMed

Lin, Guang-Mao; Liu, Liang-Le; Ye, Li-Jie; Li, Qi; Liu, Mei-Fen

2014-11-01

To study therapeutic effects of comprehensive traditional Chinese medicine therapy for preventing postsurgery stiffness after operation for terrible triad of the elbow. From December 2008 to December 2013,32 patients with elbow triad were randomly divided into two groups: therapy group and control group. There were 17 patients in control group including 12 males and 5 females with a mean age of (41.0 ± 7.1) years old. The patients in control group were received the past procedure therapy. There were 15 patients in therapy group, including 10 males and 5 females with a mean age of (41.3 ± 7.6) years old. The patients in therapy group were received comprehensive traditional Chinese medicine therapy, including passive exercise training at early stage (0 to 2 weeks after operation), transition from passive to active exercise training at middle stage (3 to 4 weeks after operation), and active exercise training at late stage (5 to 12 weeks after operation). Other treatment methods, such as orally taking or externally use of Chinese herbal medicine, manipulation and physiotherapy, were used at all stages. The Mayo Elbow Performance Score, patient satisfaction and complications were evaluated and analyzed. All the patients were followed up, and the mean duration was 7.5 months. There were no complications such as internal fixation loosing, obvious displacement fracture and heterotopic ossification occurred. The Mayo score and patient satisfaction in therapy group were higher than those in control group (t = 12.78, P = 0.00; χ2 = 8.719, P = 0.003). Seven patients needed reoperation in control group, compared with 1 patient in therapy group (χ2 = 4.626, P = 0.032). The comprehensive traditional Chinese medicine therapy is effective to prevent postoperative stiffness after operation for terrible triad of the elbow by using different methods at different stages, which is worthy of spread and application.

Bullying in school and cyberspace: Associations with depressive symptoms in Swiss and Australian adolescents

PubMed Central

2010-01-01

Background Cyber-bullying (i.e., bullying via electronic means) has emerged as a new form of bullying that presents unique challenges to those victimised. Recent studies have demonstrated that there is a significant conceptual and practical overlap between both types of bullying such that most young people who are cyber-bullied also tend to be bullied by more traditional methods. Despite the overlap between traditional and cyber forms of bullying, it remains unclear if being a victim of cyber-bullying has the same negative consequences as being a victim of traditional bullying. Method The current study investigated associations between cyber versus traditional bullying and depressive symptoms in 374 and 1320 students from Switzerland and Australia respectively (52% female; Age: M = 13.8, SD = 1.0). All participants completed a bullying questionnaire (assessing perpetration and victimisation of traditional and cyber forms of bullying behaviour) in addition to scales on depressive symptoms. Results Across both samples, traditional victims and bully-victims reported more depressive symptoms than bullies and non-involved children. Importantly, victims of cyber-bullying reported significantly higher levels of depressive symptoms, even when controlling for the involvement in traditional bullying/victimisation. Conclusions Overall, cyber-victimisation emerged as an additional risk factor for depressive symptoms in adolescents involved in bullying. PMID:21092266

DNA Barcoding for the Identification and Authentication of Animal Species in Traditional Medicine.

PubMed

Yang, Fan; Ding, Fei; Chen, Hong; He, Mingqi; Zhu, Shixin; Ma, Xin; Jiang, Li; Li, Haifeng

2018-01-01

Animal-based traditional medicine not only plays a significant role in therapeutic practices worldwide but also provides a potential compound library for drug discovery. However, persistent hunting and illegal trade markedly threaten numerous medicinal animal species, and increasing demand further provokes the emergence of various adulterants. As the conventional methods are difficult and time-consuming to detect processed products or identify animal species with similar morphology, developing novel authentication methods for animal-based traditional medicine represents an urgent need. During the last decade, DNA barcoding offers an accurate and efficient strategy that can identify existing species and discover unknown species via analysis of sequence variation in a standardized region of DNA. Recent studies have shown that DNA barcoding as well as minibarcoding and metabarcoding is capable of identifying animal species and discriminating the authentics from the adulterants in various types of traditional medicines, including raw materials, processed products, and complex preparations. These techniques can also be used to detect the unlabelled and threatened animal species in traditional medicine. Here, we review the recent progress of DNA barcoding for the identification and authentication of animal species used in traditional medicine, which provides a reference for quality control and trade supervision of animal-based traditional medicine.

DNA Barcoding for the Identification and Authentication of Animal Species in Traditional Medicine

PubMed Central

Yang, Fan; Ding, Fei; Chen, Hong; He, Mingqi; Zhu, Shixin; Ma, Xin; Jiang, Li

2018-01-01

Animal-based traditional medicine not only plays a significant role in therapeutic practices worldwide but also provides a potential compound library for drug discovery. However, persistent hunting and illegal trade markedly threaten numerous medicinal animal species, and increasing demand further provokes the emergence of various adulterants. As the conventional methods are difficult and time-consuming to detect processed products or identify animal species with similar morphology, developing novel authentication methods for animal-based traditional medicine represents an urgent need. During the last decade, DNA barcoding offers an accurate and efficient strategy that can identify existing species and discover unknown species via analysis of sequence variation in a standardized region of DNA. Recent studies have shown that DNA barcoding as well as minibarcoding and metabarcoding is capable of identifying animal species and discriminating the authentics from the adulterants in various types of traditional medicines, including raw materials, processed products, and complex preparations. These techniques can also be used to detect the unlabelled and threatened animal species in traditional medicine. Here, we review the recent progress of DNA barcoding for the identification and authentication of animal species used in traditional medicine, which provides a reference for quality control and trade supervision of animal-based traditional medicine. PMID:29849709

Techniques for cesarean section.

PubMed

Hofmeyr, Justus G; Novikova, Natalia; Mathai, Matthews; Shah, Archana

2009-11-01

The effects of complete methods of cesarean section (CS) were compared. Metaanalysis of randomized controlled trials of intention to perform CS using different techniques was carried out. Joel-Cohen-based CS compared with Pfannenstiel CS was associated with reduced blood loss, operating time, time to oral intake, fever, duration of postoperative pain, analgesic injections, and time from skin incision to birth of the baby. Misgav-Ladach compared with the traditional method was associated with reduced blood loss, operating time, time to mobilization, and length of postoperative stay for the mother. Joel-Cohen-based methods have advantages compared with Pfannenstiel and traditional (lower midline) CS techniques. However, these trials do not provide information on serious and long-term outcomes.

Search of exploration opportunity for near earth objects based on analytical gradients

NASA Astrophysics Data System (ADS)

Ren, Y.; Cui, P. Y.; Luan, E. J.

2008-01-01

The problem of searching for exploration opportunity of near Earth objects is investigated. For rendezvous missions, the analytical gradients of performance index with respect to free parameters are derived by combining the calculus of variation with the theory of state-transition matrix. Then, some initial guesses are generated random in the search space, and the performance index is optimized with the guidance of analytical gradients from these initial guesses. This method not only keeps the property of global search in traditional method, but also avoids the blindness in the traditional exploration opportunity search; hence, the computing speed could be increased greatly. Furthermore, by using this method, the search precision could be controlled effectively.

Research on fuzzy PID control to electronic speed regulator

NASA Astrophysics Data System (ADS)

Xu, Xiao-gang; Chen, Xue-hui; Zheng, Sheng-guo

2007-12-01

As an important part of diesel engine, the speed regulator plays an important role in stabilizing speed and improving engine's performance. Because there are so many model parameters of diesel-engine considered in traditional PID control and these parameters present non-linear characteristic.The method to adjust engine speed using traditional PID is not considered as a best way. Especially for the diesel-engine generator set. In this paper, the Fuzzy PID control strategy is proposed. Some problems about its utilization in electronic speed regulator are discussed. A mathematical model of electric control system for diesel-engine generator set is established and the way of the PID parameters in the model to affect the function of system is analyzed. And then it is proposed the differential coefficient must be applied in control design for reducing dynamic deviation of system and adjusting time. Based on the control theory, a study combined control with PID calculation together for turning fuzzy PID parameter is implemented. And also a simulation experiment about electronic speed regulator system was conducted using Matlab/Simulink and the Fuzzy-Toolbox. Compared with the traditional PID Algorithm, the simulated results presented obvious improvements in the instantaneous speed governing rate and steady state speed governing rate of diesel-engine generator set when the fuzzy logic control strategy used.

Tests of Independence for Ordinal Data Using Bootstrap.

ERIC Educational Resources Information Center

Chan, Wai; Yung, Yiu-Fai; Bentler, Peter M.; Tang, Man-Lai

1998-01-01

Two bootstrap tests are proposed to test the independence hypothesis in a two-way cross table. Monte Carlo studies are used to compare the traditional asymptotic test with these bootstrap methods, and the bootstrap methods are found superior in two ways: control of Type I error and statistical power. (SLD)

Circumferential finger measurements utilizing a torque meter to increase reliability.

PubMed

King, T I

1993-01-01

The purpose of this study was to compare the reliabilities of two methods of measuring finger circumference. Traditionally, finger circumference is determined clinically by the use of a tape measure. In this study, a tape-measure device for recording finger circumference utilizing a torque meter was compared with the traditional method to determine reliability differences. Ninety-two occupational therapists and occupational therapy students obtained circumferential measurements of the author's left index finger at the middle of the proximal phalanx utilizing the two methods. The readings obtained for each method were analyzed to determine the coefficient of variation and to compare their variances. The coefficient of variation for the traditional method was 2.92 and for the device utilizing the torque meter was 0.75. The F ratio was 15.63, which is significant at the 0.01 level. The results of this study indicate greater interrater reliability using a device that can accurately measure torque and allow the therapist to control the amount of tension applied when obtaining circumferential measurements using a tape measure.

Traditional neuropsychological correlates and reliability of the automated neuropsychological assessment metrics-4 battery for Parkinson's disease.

PubMed

Hawkins, Keith A; Jennings, Danna; Vincent, Andrea S; Gilliland, Kirby; West, Adrienne; Marek, Kenneth

2012-08-01

The automated neuropsychological assessment metrics battery-4 for PD offers the promise of a computerized approach to cognitive assessment. To assess its utility, the ANAM4-PD was administered to 72 PD patients and 24 controls along with a traditional battery. Reliability was assessed by retesting 26 patients. The cognitive efficiency score (CES; a global score) exhibited high reliability (r = 0.86). Constituent variables exhibited lower reliability. The CES correlated strongly with the traditional battery global score, but displayed weaker relationships to UPDRS scores than the traditional score. Multivariate analysis of variance revealed a significant difference between the patient and control groups in ANAM4-PD performance, with three ANAM4-PD tests, math, tower, and pursuit tracking, displaying sizeable differences. In discriminant analyses these variables were as effective as the total ANAM4-PD in classifying cases designated as impaired based on traditional variables. Principal components analyses uncovered fewer factors in the ANAM4-PD relative to the traditional battery. ANAM4-PD variables correlated at higher levels with traditional motor and processing speed variables than with untimed executive, intellectual or memory variables. The ANAM4-PD displays high global reliability, but variable subtest reliability. The battery assesses a narrower range of cognitive functions than traditional tests, and discriminates between patients and controls less effectively. Three ANAM4-PD tests, pursuit tracking, math, and tower performed as well as the total ANAM4-PD in classifying patients as cognitively impaired. These findings could guide the refinement of the ANAM4-PD as an efficient method of screening for mild to moderate cognitive deficits in PD patients. Copyright © 2012 Elsevier Ltd. All rights reserved.

Parasitic plants in agriculture: Chemical ecology of germination and host-plant location as targets for sustainable control: A review

Treesearch

Justin B. Runyon; John F. Tooker; Mark C. Mescher; Consuelo M. De Moraes

2009-01-01

Parasitic plants are among the most problematic pests of agricultural crops worldwide. Effective means of control are generally lacking, in part because of the close physiological connection between the established parasite and host plant hindering efficient control using traditional methods. Seed germination and host location are critical early-growth stages that...

Trust-Based Access Control Model from Sociological Approach in Dynamic Online Social Network Environment

PubMed Central

Kim, Seungjoo

2014-01-01

There has been an explosive increase in the population of the OSN (online social network) in recent years. The OSN provides users with many opportunities to communicate among friends and family. Further, it facilitates developing new relationships with previously unknown people having similar beliefs or interests. However, the OSN can expose users to adverse effects such as privacy breaches, the disclosing of uncontrolled material, and the disseminating of false information. Traditional access control models such as MAC, DAC, and RBAC are applied to the OSN to address these problems. However, these models are not suitable for the dynamic OSN environment because user behavior in the OSN is unpredictable and static access control imposes a burden on the users to change the access control rules individually. We propose a dynamic trust-based access control for the OSN to address the problems of the traditional static access control. Moreover, we provide novel criteria to evaluate trust factors such as sociological approach and evaluate a method to calculate the dynamic trust values. The proposed method can monitor negative behavior and modify access permission levels dynamically to prevent the indiscriminate disclosure of information. PMID:25374943

Trust-based access control model from sociological approach in dynamic online social network environment.

PubMed

Baek, Seungsoo; Kim, Seungjoo

2014-01-01

There has been an explosive increase in the population of the OSN (online social network) in recent years. The OSN provides users with many opportunities to communicate among friends and family. Further, it facilitates developing new relationships with previously unknown people having similar beliefs or interests. However, the OSN can expose users to adverse effects such as privacy breaches, the disclosing of uncontrolled material, and the disseminating of false information. Traditional access control models such as MAC, DAC, and RBAC are applied to the OSN to address these problems. However, these models are not suitable for the dynamic OSN environment because user behavior in the OSN is unpredictable and static access control imposes a burden on the users to change the access control rules individually. We propose a dynamic trust-based access control for the OSN to address the problems of the traditional static access control. Moreover, we provide novel criteria to evaluate trust factors such as sociological approach and evaluate a method to calculate the dynamic trust values. The proposed method can monitor negative behavior and modify access permission levels dynamically to prevent the indiscriminate disclosure of information.

Propellantless Attitude Control of Solar Sail Technology Utilizing Reflective Control Devices

NASA Technical Reports Server (NTRS)

Munday, Jeremy

2016-01-01

Solar sails offer an opportunity for a CubeSatscale, propellant-free spacecraft technology that enables long-term and long-distance missions not possible with traditional methods. Solar sails operate using the transfer of linear momentum from photons of sunlight reflected from the surface of the sail. To propel the spacecraft, no mechanically moving parts, thrusters, or propellant are needed. However, attitude control, or orientation, is still performed using traditional methods involving reaction wheels and propellant ejection, which severely limit mission lifetime. For example, the current state of the art solutions employed by upcoming missions couple solar sails with a state of the art propellant ejection gas system. Here, the use of the gas thruster has limited the lifetime of the mission. To solve the limited mission lifetime problem, the Propellantless Attitude Control of Solar Sail Technology Utilizing Reflective Control Devices project team is working on propellantless attitude control using thin layers of material, an optical film, electrically switchable from transparent to reflective. The technology is based on a polymer-dispersed liquid crystal (PDLC), which allows this switch upon application of a voltage. This technology removes the need for propellant, which reduces weight and cost while improving performance and lifetime.

[Consideration about chemistry, manufacture and control (CMC) key problems in simplified registration of classical traditional Chinese medicine excellent prescriptions].

PubMed

Wang, Zhi-Min; Liu, Ju-Yan; Liu, Xiao-Qian; Wang, De-Qin; Yan, Li-Hua; Zhu, Jin-Jin; Gao, Hui-Min; Li, Chun; Wang, Jin-Yu; Li, Chu-Yuan; Ni, Qing-Chun; Huang, Ji-Sheng; Lin, Juan

2017-05-01

As an outstanding representative of traditional Chinese medicine(TCM) prescriptions accumulated from famous TCM doctors' clinical experiences in past dynasties, classical TCM excellent prescriptions (cTCMeP) are the most valuable part of TCM system. To support the research and development of cTCMeP, a series of regulations and measures were issued to encourage its simplified registration. There is still a long-way to go because many key problems and puzzles about technology, registration and administration in cTCMeP R&D process are not resolved. Based on the analysis of registration and management regulations of botanical drug products in FDA of USA and Japan, and EMA of Europe, the possible key problems and countermeasures in chemistry, manufacture and control (CMC) of simplified registration of cTCMeP were analyzed on the consideration of its actual situation. The method of "reference decoction extract by traditional prescription" (RDETP) was firstly proposed as standard to evaluate the quality and preparation uniformity between the new developing product under simplified registration and traditional original usages of cTCMeP, instead of Standard Decoction method in Japan. "Totality of the evidence" approach, mass balance and bioassay/biological assay of cTCMeP were emphatically suggested to introduce to the quality uniformity evaluation system in the raw drug material, drug substance and final product between the modern product and traditional decoction. Copyright© by the Chinese Pharmaceutical Association.

Pain Perception: Computerized versus Traditional Local Anesthesia in Pediatric Patients.

PubMed

Mittal, M; Kumar, A; Srivastava, D; Sharma, P; Sharma, S

2015-01-01

Local anesthetic injection is one of the most anxiety- provoking procedure for both children and adult patients in dentistry. A computerized system for slow delivery of local anesthetic has been developed as a possible solution to reduce the pain related to the local anesthetic injection. The present study was conducted to evaluate and compare pain perception rates in pediatric patients with computerized system and traditional methods, both objectively and subjectively. It was a randomized controlled study in one hundred children aged 8-12 years in healthy physical and mental state, assessed as being cooperative, requiring extraction of maxillary primary molars. Children were divided into two groups by random sampling - Group A received buccal and palatal infiltration injection using Wand, while Group B received buccal and palatal infiltration using traditional syringe. Visual Analog scale (VAS) was used for subjective evaluation of pain perception by patient. Sound, Eye, Motor (SEM) scale was used as an objective method where sound, eye and motor reactions of patient were observed and heart rate measurement using pulse oximeter was used as the physiological parameter for objective evaluation. Patients experienced significantly less pain of injection with the computerized method during palatal infiltration, while less pain was not statistically significant during buccal infiltration. Heart rate increased during both buccal and palatal infiltration in traditional and computerized local anesthesia, but difference between traditional and computerized method was not statistically significant. It was concluded that pain perception was significantly more during traditional palatal infiltration injection as compared to computerized palatal infiltration, while there was no difference in pain perception during buccal infiltration in both the groups.

Insecticidal effects of deltamethrin in laboratory and field populations of Culicoides species: how effective are host-contact reduction methods in India?

PubMed

De Keyser, Rien; Cassidy, Clare; Laban, Swathi; Gopal, Prakash; Pickett, John A; Reddy, Yarabolu K; Prasad, Minakshi; Prasad, Gaya; Chirukandoth, Sreekumar; Senthilven, Kandasamy; Carpenter, Simon; Logan, James G

2017-01-31

Bluetongue virus (BTV) is transmitted by Culicoides biting midges and causes bluetongue (BT), a clinical disease observed primarily in sheep. BT has a detrimental effect on subsistence farmers in India, where hyperendemic outbreaks impact on smallholdings in the southern states of the country. In this study, we establish a reliable method for testing the toxic effects of deltamethrin on Culicoides and then compare deltamethrin with traditional control methods used by farmers in India. Effects of deltamethrin were initially tested using a colonised strain of Culicoides nubeculosus Meigen and a modified World Health Organisation exposure assay. This method was then applied to field populations of Culicoides spp. in India. The field population of C. oxystoma in India had a greater LC 50 (0.012 ± 0.009%) for deltamethrin than laboratory-reared C.nubeculosus (0.0013 ± 0.0002%). Exposure of C. nubeculosus to deltamethrin at higher ambient temperatures resulted in greater rates of knockdown but a lower mortality rate at 24 h post-exposure. Behavioural assays with C. nubeculosus in WHO tubes provided evidence for contact irritancy and spatial repellence caused by deltamethrin. The field experiments in India, however, provided no evidence for repellent or toxic effects of deltamethrin. Traditional methods such as the application of neem oil and burning of neem leaves also provided no protection. Our study demonstrates that field-collected Culicoides in India are less susceptible to deltamethrin exposure than laboratory-bred C. nubeculosus and traditional methods of insect control do not provide protection to sheep. These low levels of susceptibility to deltamethrin have not been recorded before in field populations of Culicoides and suggest resistance to synthetic pyrethrioids. Alternative insect control methods, in addition to vaccination, may be needed to protect Indian livestock from BTV transmission.

The effects of modeling instruction on high school physics academic achievement

NASA Astrophysics Data System (ADS)

Wright, Tiffanie L.

The purpose of this study was to explore whether Modeling Instruction, compared to traditional lecturing, is an effective instructional method to promote academic achievement in selected high school physics classes at a rural middle Tennessee high school. This study used an ex post facto , quasi-experimental research methodology. The independent variables in this study were the instructional methods of teaching. The treatment variable was Modeling Instruction and the control variable was traditional lecture instruction. The Treatment Group consisted of participants in Physical World Concepts who received Modeling Instruction. The Control Group consisted of participants in Physical Science who received traditional lecture instruction. The dependent variable was gains scores on the Force Concepts Inventory (FCI). The participants for this study were 133 students each in both the Treatment and Control Groups (n = 266), who attended a public, high school in rural middle Tennessee. The participants were administered the Force Concepts Inventory (FCI) prior to being taught the mechanics of physics. The FCI data were entered into the computer-based Statistical Package for the Social Science (SPSS). Two independent samples t-tests were conducted to answer the research questions. There was a statistically significant difference between the treatment and control groups concerning the instructional method. Modeling Instructional methods were found to be effective in increasing the academic achievement of students in high school physics. There was no statistically significant difference between FCI gains scores for gender. Gender was found to have no effect on the academic achievement of students in high school physics classes. However, even though there was not a statistically significant difference, female students' gains scores were higher than male students' gains scores when Modeling Instructional methods of teaching were used. Based on these findings, it is recommended that high school science teachers should use Modeling Instructional methods of teaching daily in their classrooms. A recommendation for further research is to expand the Modeling Instructional methods of teaching into different content areas, (i.e., reading and language arts) to explore academic achievement gains.

Quantification of uncertainties in the performance of smart composite structures

NASA Technical Reports Server (NTRS)

Shiao, Michael C.; Chamis, Christos C.

1993-01-01

A composite wing with spars, bulkheads, and built-in control devices is evaluated using a method for the probabilistic assessment of smart composite structures. Structural responses (such as change in angle of attack, vertical displacements, and stresses in regular plies with traditional materials and in control plies with mixed traditional and actuation materials) are probabilistically assessed to quantify their respective scatter. Probabilistic sensitivity factors are computed to identify those parameters that have a significant influence on a specific structural response. Results show that the uncertainties in the responses of smart composite structures can be quantified. Responses such as structural deformation, ply stresses, frequencies, and buckling loads in the presence of defects can be reliably controlled to satisfy specified design requirements.

Reasons given by hypertensive patients for concurrently using traditional and Western medicine at Natalspruit Hospital in the Gauteng Province, South Africa

PubMed Central

Mabuza, Langalibalele H.; Okonta, Henry I.

2013-01-01

Abstract Background In 2007, a large number of hypertensive patients seen at Natalspruit Hospital had poor adherent to their anti-hypertension treatment which manifested itself through poor blood pressure control. On enquiry, they revealed that they were also taking traditional medicines. Objectives To explore the reasons given by hypertensive patients for concurrently using traditional and Western medicine. Methods A qualitative study was conducted amongst nine purposefully selected participants attending treatment at the hospital. Interviews were conducted in the Southern Sotho and IsiZulu languages and were audio-taped. The exploratory question was: ‘Would you tell us why you are taking traditional medicine together with the antihypertensive medicine your are receiving at this hospital?’ The transcribed and translated transcriptions were analysed using the ‘cut and paste’ method to identify themes. Results Themes that emerged were that traditional medicine was readily accessible; traditional healers displayed knowledge and confidence in their medicine; traditional medicine was perceived to counteract the side-effects of western medicine; the two streams were perceived to complement each other and both streams could lead to a ‘cure’. Patients were disappointed at the perceived bad attitude of the hospital staff. Conclusion The reasons given by hypertensive patients for their concurrent use of traditional and Western medicine centred around patients’ relatively favourable perception of traditional medicine and its practitioners. Western medicine health care practitioners should continue health education on antihypertensive medication in a manner acceptable to patients.

Effectiveness of Case-Based Learning Instruction on Epistemological Beliefs and Attitudes Toward Chemistry

NASA Astrophysics Data System (ADS)

Çam, Aylin; Geban, Ömer

2011-02-01

The purpose of the study was to investigate the effectiveness of case-based learning instruction over traditionally designed chemistry instruction on eleventh grade students' epistemological beliefs and their attitudes toward chemistry as a school subject. The subjects of this study consisted of 63 eleventh grade students from two intact classes of an urban high school instructed with same teacher. Each teaching method was randomly assigned to one class. The experimental group received case-based learning and the control group received traditional instruction. At the experimental group, life cases were presented with small group format; at the control group, lecturing and discussion was carried out. The results showed that there was a significant difference between the experimental and control group with respect to their epistemological beliefs and attitudes toward chemistry as a school subject in favor of case-based learning method group. Thus, case base learning is helpful for development of students' epistemological beliefs and attitudes toward chemistry.

Adaptive tracking control of leader-following linear multi-agent systems with external disturbances

NASA Astrophysics Data System (ADS)

Lin, Hanquan; Wei, Qinglai; Liu, Derong; Ma, Hongwen

2016-10-01

In this paper, the consensus problem for leader-following linear multi-agent systems with external disturbances is investigated. Brownian motions are used to describe exogenous disturbances. A distributed tracking controller based on Riccati inequalities with an adaptive law for adjusting coupling weights between neighbouring agents is designed for leader-following multi-agent systems under fixed and switching topologies. In traditional distributed static controllers, the coupling weights depend on the communication graph. However, coupling weights associated with the feedback gain matrix in our method are updated by state errors between neighbouring agents. We further present the stability analysis of leader-following multi-agent systems with stochastic disturbances under switching topology. Most traditional literature requires the graph to be connected all the time, while the communication graph is only assumed to be jointly connected in this paper. The design technique is based on Riccati inequalities and algebraic graph theory. Finally, simulations are given to show the validity of our method.

Self-optimizing Pitch Control for Large Scale Wind Turbine Based on ADRC

NASA Astrophysics Data System (ADS)

Xia, Anjun; Hu, Guoqing; Li, Zheng; Huang, Dongxiao; Wang, Fengxiang

2018-01-01

Since wind turbine is a complex nonlinear and strong coupling system, traditional PI control method can hardly achieve good control performance. A self-optimizing pitch control method based on the active-disturbance-rejection control theory is proposed in this paper. A linear model of the wind turbine is derived by linearizing the aerodynamic torque equation and the dynamic response of wind turbine is transformed into a first-order linear system. An expert system is designed to optimize the amplification coefficient according to the pitch rate and the speed deviation. The purpose of the proposed control method is to regulate the amplification coefficient automatically and keep the variations of pitch rate and rotor speed in proper ranges. Simulation results show that the proposed pitch control method has the ability to modify the amplification coefficient effectively, when it is not suitable, and keep the variations of pitch rate and rotor speed in proper ranges

Utilization of pyrosequencing to monitor the microbiome dynamics of probiotic treated poultry (Gallus gallus domesticus) during downstream poultry processing

USDA-ARS?s Scientific Manuscript database

Antibiotic growth promoters that have been historically employed to control pathogens and increase the rate of animal development for human consumption are currently banned in many countries. Probiotics have been proposed as an alternative to control pathogenic bacteria. Traditional culture method...

Technology and Music Education in a Digitized, Disembodied, Posthuman World

ERIC Educational Resources Information Center

Thwaites, Trevor

2014-01-01

Digital forms of sound manipulation are eroding traditional methods of sound development and transmission, causing a disjuncture in the ontology of music. Sound, the ambient phenomenon, is becoming disrupted and decentred by the struggles between long established controls, beliefs and desires as well as controls from within technologized contexts.…

Sliding mode control method having terminal convergence in finite time

NASA Technical Reports Server (NTRS)

Venkataraman, Subramanian T. (Inventor); Gulati, Sandeep (Inventor)

1994-01-01

An object of this invention is to provide robust nonlinear controllers for robotic operations in unstructured environments based upon a new class of closed loop sliding control methods, sometimes denoted terminal sliders, where the new class will enforce closed-loop control convergence to equilibrium in finite time. Improved performance results from the elimination of high frequency control switching previously employed for robustness to parametric uncertainties. Improved performance also results from the dependence of terminal slider stability upon the rate of change of uncertainties over the sliding surface rather than the magnitude of the uncertainty itself for robust control. Terminal sliding mode control also yields improved convergence where convergence time is finite and is to be controlled. A further object is to apply terminal sliders to robot manipulator control and benchmark performance with the traditional computed torque control method and provide for design of control parameters.

Intelligent vehicle electrical power supply system with central coordinated protection

NASA Astrophysics Data System (ADS)

Yang, Diange; Kong, Weiwei; Li, Bing; Lian, Xiaomin

2016-07-01

The current research of vehicle electrical power supply system mainly focuses on electric vehicles (EV) and hybrid electric vehicles (HEV). The vehicle electrical power supply system used in traditional fuel vehicles is rather simple and imperfect; electrical/electronic devices (EEDs) applied in vehicles are usually directly connected with the vehicle's battery. With increasing numbers of EEDs being applied in traditional fuel vehicles, vehicle electrical power supply systems should be optimized and improved so that they can work more safely and more effectively. In this paper, a new vehicle electrical power supply system for traditional fuel vehicles, which accounts for all electrical/electronic devices and complex work conditions, is proposed based on a smart electrical/electronic device (SEED) system. Working as an independent intelligent electrical power supply network, the proposed system is isolated from the electrical control module and communication network, and access to the vehicle system is made through a bus interface. This results in a clean controller power supply with no electromagnetic interference. A new practical battery state of charge (SoC) estimation method is also proposed to achieve more accurate SoC estimation for lead-acid batteries in traditional fuel vehicles so that the intelligent power system can monitor the status of the battery for an over-current state in each power channel. Optimized protection methods are also used to ensure power supply safety. Experiments and tests on a traditional fuel vehicle are performed, and the results reveal that the battery SoC is calculated quickly and sufficiently accurately for battery over-discharge protection. Over-current protection is achieved, and the entire vehicle's power utilization is optimized. For traditional fuel vehicles, the proposed vehicle electrical power supply system is comprehensive and has a unified system architecture, enhancing system reliability and security.

Controls/CFD Interdisciplinary Research Software Generates Low-Order Linear Models for Control Design From Steady-State CFD Results

NASA Technical Reports Server (NTRS)

Melcher, Kevin J.

1997-01-01

The NASA Lewis Research Center is developing analytical methods and software tools to create a bridge between the controls and computational fluid dynamics (CFD) disciplines. Traditionally, control design engineers have used coarse nonlinear simulations to generate information for the design of new propulsion system controls. However, such traditional methods are not adequate for modeling the propulsion systems of complex, high-speed vehicles like the High Speed Civil Transport. To properly model the relevant flow physics of high-speed propulsion systems, one must use simulations based on CFD methods. Such CFD simulations have become useful tools for engineers that are designing propulsion system components. The analysis techniques and software being developed as part of this effort are an attempt to evolve CFD into a useful tool for control design as well. One major aspect of this research is the generation of linear models from steady-state CFD results. CFD simulations, often used during the design of high-speed inlets, yield high resolution operating point data. Under a NASA grant, the University of Akron has developed analytical techniques and software tools that use these data to generate linear models for control design. The resulting linear models have the same number of states as the original CFD simulation, so they are still very large and computationally cumbersome. Model reduction techniques have been successfully applied to reduce these large linear models by several orders of magnitude without significantly changing the dynamic response. The result is an accurate, easy to use, low-order linear model that takes less time to generate than those generated by traditional means. The development of methods for generating low-order linear models from steady-state CFD is most complete at the one-dimensional level, where software is available to generate models with different kinds of input and output variables. One-dimensional methods have been extended somewhat so that linear models can also be generated from two- and three-dimensional steady-state results. Standard techniques are adequate for reducing the order of one-dimensional CFD-based linear models. However, reduction of linear models based on two- and three-dimensional CFD results is complicated by very sparse, ill-conditioned matrices. Some novel approaches are being investigated to solve this problem.

Jointly determining significance levels of primary and replication studies by controlling the false discovery rate in two-stage genome-wide association studies.

PubMed

Jiang, Wei; Yu, Weichuan

2017-01-01

In genome-wide association studies, we normally discover associations between genetic variants and diseases/traits in primary studies, and validate the findings in replication studies. We consider the associations identified in both primary and replication studies as true findings. An important question under this two-stage setting is how to determine significance levels in both studies. In traditional methods, significance levels of the primary and replication studies are determined separately. We argue that the separate determination strategy reduces the power in the overall two-stage study. Therefore, we propose a novel method to determine significance levels jointly. Our method is a reanalysis method that needs summary statistics from both studies. We find the most powerful significance levels when controlling the false discovery rate in the two-stage study. To enjoy the power improvement from the joint determination method, we need to select single nucleotide polymorphisms for replication at a less stringent significance level. This is a common practice in studies designed for discovery purpose. We suggest this practice is also suitable in studies with validation purpose in order to identify more true findings. Simulation experiments show that our method can provide more power than traditional methods and that the false discovery rate is well-controlled. Empirical experiments on datasets of five diseases/traits demonstrate that our method can help identify more associations. The R-package is available at: http://bioinformatics.ust.hk/RFdr.html .

Dominance of Sterilization and Alternative Choices of Contraception in India: An Appraisal of the Socioeconomic Impact

PubMed Central

de Oliveira, Isabel Tiago; Dias, José G.; Padmadas, Sabu S.

2014-01-01

Background The recent decline in fertility in India has been unprecedented especially in southern India, where fertility is almost exclusively controlled by means of permanent contraceptive methods, mainly female sterilization, which constitutes about two-thirds of overall contraceptive use. Many Indian women undergo sterilization at relatively young ages as a consequence of early marriage and childbearing in short birth intervals. This research aims to investigate the socioeconomic factors determining the choices for alternative contraceptive choices against the dominant preference for sterilization among married women in India. Methods Data for this study are drawn from the 2005–06 National Family Health Surveys focusing on a sample of married women who reported having used a method of contraception in the five years preceding the survey. A multilevel multinomial logit regression is used to estimate the impact of socioeconomic factors on contraceptive choices, differentiating temporary modern or traditional methods versus sterilization. Findings Religious affiliation, women's education and occupation had overarching influence on method choices amongst recent users. Muslim women were at higher odds of choosing a traditional or modern temporary method than sterilization. Higher level of women's education increased the odds of modern temporary method choices but the education effect on traditional method choices was only marginally significant. Recent users belonging to wealthier households had higher odds of choosing modern methods over sterilization. Exposure to family planning messages through radio had a positive effect on modern and traditional method choices. Community variations in method choices were highly significant. Conclusion The persistent dominance of sterilization in the Indian family planning programme is largely determined by socioeconomic conditions. Reproductive health programmes should address the socioeconomic barriers and consider multiple cost-effective strategies such as mass media to promote awareness of modern temporary methods. PMID:24489759

Home blood-pressure monitoring in a hypertensive pregnant population: cost minimisation study.

PubMed

Xydopoulos, G; Perry, H; Sheehan, E; Thilaganathan, B; Fordham, R; Khalil, A

2018-03-08

Traditional monitoring of blood pressure in hypertensive pregnant women requires frequent visits to the maternity outpatient services. Home blood-pressure monitoring (HBPM) could offer a cost-saving alternative that is acceptable to patients. The main objective of this study was to undertake a health economic analysis of HBPM compared with traditional monitoring in hypertensive pregnant women. This was a case-control study. Cases were pregnant women with hypertension who had HBPM with or without the adjunct of a smartphone app, via a specially designed pathway. The control group were managed as per existing hospital guidelines. Specific outcome measures were the number of outpatient visits, inpatient bed stays and investigations performed. Maternal, fetal and neonatal adverse outcomes were also recorded. Health economic analysis was performed using two methods: direct cost comparison of the study dataset and process scenario modelling. There were 108 women in the HBPM group, of whom 29 recorded their results on the smartphone app (App-HBPM) and 79 in their notes (Non-app HBPM). The control group comprised of 58 patients. There were significantly more women with chronic hypertension in the HBPM group (49.1% vs 25.9%, P = 0.004). The HBPM group had significantly longer duration of monitoring (9 weeks vs 5 weeks P = 0.004) and started monitoring from an earlier gestation (30 weeks vs 33.6 weeks, P = 0.001). Despite these differences, the mean saving per week for HBPM compared with the control group was £200.69. For the App-HBPM cohort, the saving per week compared with the control group was £286.53. The process modelling method predicted savings of between £98.32 and £245.80 per week using HBPM compared to the traditional monitoring. HBPM in hypertensive pregnancies appears to be cost-saving compared with traditional monitoring, without compromising maternal, fetal or neonatal safety. Larger studies are required to confirm these findings. This article is protected by copyright. All rights reserved.

The Efficacy of Three Learning Methods Collaborative, Context-Based Learning and Traditional, on Learning, Attitude and Behaviour of Undergraduate Nursing Students: Integrating Theory and Practice

PubMed Central

Hasanpour-Dehkordi, Ali

2016-01-01

Introduction Communication skills training, responsibility, respect, and self-awareness are important indexes of changing learning behaviours in modern approaches. Aim The aim of this study was to investigate the efficacy of three learning approaches, collaborative, context-based learning (CBL), and traditional, on learning, attitude, and behaviour of undergraduate nursing students. Materials and Methods This study was a clinical trial with pretest and post-test of control group. The participants were senior nursing students. The samples were randomly assigned to three groups; CBL, collaborative, and traditional. To gather data a standard questionnaire of students’ behaviour and attitude was administered prior to and after the intervention. Also, the rate of learning was investigated by a researcher-developed questionnaire prior to and after the intervention in the three groups. Results In CBL and collaborative training groups, the mean score of behaviour and attitude increased after the intervention. But no significant association was obtained between the mean scores of behaviour and attitude prior to and after the intervention in the traditional group. However, the mean learning score increased significantly in the CBL, collaborative, and traditional groups after the study in comparison to before the study. Conclusion Both CBL and collaborative approaches were useful in terms of increased respect, self-awareness, self-evaluation, communication skills and responsibility as well as increased motivation and learning score in comparison to traditional method. PMID:27190926

A dynamic access control method based on QoS requirement

NASA Astrophysics Data System (ADS)

Li, Chunquan; Wang, Yanwei; Yang, Baoye; Hu, Chunyang

2013-03-01

A dynamic access control method is put forward to ensure the security of the sharing service in Cloud Manufacturing, according to the application characteristics of cloud manufacturing collaborative task. The role-based access control (RBAC) model is extended according to the characteristics of cloud manufacturing in this method. The constraints are considered, which are from QoS requirement of the task context to access control, based on the traditional static authorization. The fuzzy policy rules are established about the weighted interval value of permissions. The access control authorities of executable service by users are dynamically adjusted through the fuzzy reasoning based on the QoS requirement of task. The main elements of the model are described. The fuzzy reasoning algorithm of weighted interval value based QoS requirement is studied. An effective method is provided to resolve the access control of cloud manufacturing.

Adaptive Event-Triggered Control Based on Heuristic Dynamic Programming for Nonlinear Discrete-Time Systems.

PubMed

Dong, Lu; Zhong, Xiangnan; Sun, Changyin; He, Haibo

2017-07-01

This paper presents the design of a novel adaptive event-triggered control method based on the heuristic dynamic programming (HDP) technique for nonlinear discrete-time systems with unknown system dynamics. In the proposed method, the control law is only updated when the event-triggered condition is violated. Compared with the periodic updates in the traditional adaptive dynamic programming (ADP) control, the proposed method can reduce the computation and transmission cost. An actor-critic framework is used to learn the optimal event-triggered control law and the value function. Furthermore, a model network is designed to estimate the system state vector. The main contribution of this paper is to design a new trigger threshold for discrete-time systems. A detailed Lyapunov stability analysis shows that our proposed event-triggered controller can asymptotically stabilize the discrete-time systems. Finally, we test our method on two different discrete-time systems, and the simulation results are included.

Defining the best quality-control systems by design and inspection.

PubMed

Hinckley, C M

1997-05-01

Not all of the many approaches to quality control are equally effective. Nonconformities in laboratory testing are caused basically by excessive process variation and mistakes. Statistical quality control can effectively control process variation, but it cannot detect or prevent most mistakes. Because mistakes or blunders are frequently the dominant source of nonconformities, we conclude that statistical quality control by itself is not effective. I explore the 100% inspection methods essential for controlling mistakes. Unlike the inspection techniques that Deming described as ineffective, the new "source" inspection methods can detect mistakes and enable corrections before nonconformities are generated, achieving the highest degree of quality at a fraction of the cost of traditional methods. Key relationships between task complexity and nonconformity rates are also described, along with cultural changes that are essential for implementing the best quality-control practices.

Traditional and modern plant breeding methods with examples in rice (Oryza sativa L.).

PubMed

Breseghello, Flavio; Coelho, Alexandre Siqueira Guedes

2013-09-04

Plant breeding can be broadly defined as alterations caused in plants as a result of their use by humans, ranging from unintentional changes resulting from the advent of agriculture to the application of molecular tools for precision breeding. The vast diversity of breeding methods can be simplified into three categories: (i) plant breeding based on observed variation by selection of plants based on natural variants appearing in nature or within traditional varieties; (ii) plant breeding based on controlled mating by selection of plants presenting recombination of desirable genes from different parents; and (iii) plant breeding based on monitored recombination by selection of specific genes or marker profiles, using molecular tools for tracking within-genome variation. The continuous application of traditional breeding methods in a given species could lead to the narrowing of the gene pool from which cultivars are drawn, rendering crops vulnerable to biotic and abiotic stresses and hampering future progress. Several methods have been devised for introducing exotic variation into elite germplasm without undesirable effects. Cases in rice are given to illustrate the potential and limitations of different breeding approaches.

GIS Based Distributed Runoff Predictions in Variable Source Area Watersheds Employing the SCS-Curve Number

NASA Astrophysics Data System (ADS)

Steenhuis, T. S.; Mendoza, G.; Lyon, S. W.; Gerard Marchant, P.; Walter, M. T.; Schneiderman, E.

2003-04-01

Because the traditional Soil Conservation Service Curve Number (SCS-CN) approach continues to be ubiquitously used in GIS-BASED water quality models, new application methods are needed that are consistent with variable source area (VSA) hydrological processes in the landscape. We developed within an integrated GIS modeling environment a distributed approach for applying the traditional SCS-CN equation to watersheds where VSA hydrology is a dominant process. Spatial representation of hydrologic processes is important for watershed planning because restricting potentially polluting activities from runoff source areas is fundamental to controlling non-point source pollution. The methodology presented here uses the traditional SCS-CN method to predict runoff volume and spatial extent of saturated areas and uses a topographic index to distribute runoff source areas through watersheds. The resulting distributed CN-VSA method was incorporated in an existing GWLF water quality model and applied to sub-watersheds of the Delaware basin in the Catskill Mountains region of New York State. We found that the distributed CN-VSA approach provided a physically-based method that gives realistic results for watersheds with VSA hydrology.

The Celiac Patient Antibody Response to Conventional and Gluten-Removed Beer.

PubMed

Allred, Laura K; Lesko, Katherine; McKiernan, Diane; Kupper, Cynthia; Guandalini, Stefano

2017-03-01

Enzymatic digestion, or hydrolysis, has been proposed for treating gluten-containing foods and beverages to make them safe for persons with celiac disease (CD). There are no validated testing methods that allow the quantitation of all the hydrolyzed or fermented gluten peptides in foods and beverages that might be harmful to CD patients, making it difficult to assess the safety of hydrolyzed products. This study examines an ELISA-based method to determine whether serum antibody binding of residual peptides in a fermented barley-based product is greater among active-CD patients than a normal control group, using commercial beers as a test case. Sera from 31 active-CD patients and 29 nonceliac control subjects were used to assess the binding of proteins from barley, rice, traditional beer, gluten-free beer, and enzymatically treated (gluten-removed) traditional beer. In the ELISA, none of the subjects' sera bound to proteins in the gluten-free beer. Eleven active-CD patient serum samples demonstrated immunoglobulin A (IgA) or immunoglobulin G (IgG) binding to a barley extract, compared to only one nonceliac control subject. Of the seven active-CD patients who had an IgA binding response to barley, four also responded to traditional beer, and two of these responded to the gluten-removed beer. None of the nonceliac control subjects' sera bound to all three beer samples. Binding of protein fragments in hydrolyzed or fermented foods and beverages by serum from active-CD patients, but not nonceliac control subjects, may indicate the presence of residual peptides that are celiac-specific.

Field investigation on the repellent activity of some aromatic plants by traditional means against Anopheles arabiensis and An. pharoensis (Diptera: Culicidae) around Koka, central Ethiopia.

PubMed

Dugassa, Sisay; Medhin, Girmay; Balkew, Meshesha; Seyoum, Aklilu; Gebre-Michael, Teshome

2009-10-01

A study was undertaken to evaluate the impact of traditional application methods of mosquito repellent plants in the reduction of the human-vector contact of malaria vectors in central Ethiopia. The plants (Corymbia citriodora, Eucalyptus camaldulensis, Ocimum suave and Ocimum basilicum) were tested by thermal expulsion and direct burning on traditional stoves in the field against two important malaria vectors in Ethiopia (Anopheles arabiensis and An. pharoensis). A Latin-square design was applied for randomly assigning the treatment plants and control to experimental houses over different nights. The percentage repellency of each candidate plant by both application methods was estimated from the catches of mosquitoes in the treatment and control houses. On direct burning of the plants, O. basilicum showed the highest percentage repellency (73.11%, P<0.001) and E. camaldulensis the least repellency (65.29%, P<0.001) against An. arabiensis. By the same method of application, C. citriodora on the other hand gave the highest repellency (72.87%, P<0.001) while E. camaldulensis was still the least repellent plant (66.60%, P<0.001) against An. pharoensis. On thermal expulsion, C. citriodora exhibited the highest repellency (78.69%, P<0.001) while E. camaldulensis was the lowest repellent plant (71.91%, P<0.001) against An. arabiensis. Against An. pharoensis, C. citriodora gave the highest repellency (72.9%, P<0.001) while E. camaldulensis still gave the least repellency (72.2%, P<0.001) on the same method of application. All the tested plants by both methods of application gave partial but significant protection (>65%) against the house-entry and biting of two important malaria vectors in Ethiopia, and thus have a potential to be used at least as supplements to other control methods. However, feasibility and actual impact on disease transmission need to be known on these and other potentially useful plants.

The fuzzy algorithm in the die casting mould for the application of multi-channel temperature control

NASA Astrophysics Data System (ADS)

Sun, Jin-gen; Chen, Yi; Zhang, Jia-nan

2017-01-01

Mould manufacturing is one of the most basic elements in the production chain of China. The mould manufacturing technology has become an important symbol to measure the level of a country's manufacturing industry. The die-casting mould multichannel intelligent temperature control method is studied by cooling water circulation, which uses fuzzy control to realize, aiming at solving the shortcomings of slow speed and big energy consumption during the cooling process of current die-casting mould. At present, the traditional PID control method is used to control the temperature, but it is difficult to ensure the control precision. While , the fuzzy algorithm is used to realize precise control of mould temperature in cooling process. The design is simple, fast response, strong anti-interference ability and good robustness. Simulation results show that the control method is completely feasible, which has higher control precision.

The application of neural network PID controller to control the light gasoline etherification

NASA Astrophysics Data System (ADS)

Cheng, Huanxin; Zhang, Yimin; Kong, Lingling; Meng, Xiangyong

2017-06-01

Light gasoline etherification technology can effectively improve the quality of gasoline, which is environmental- friendly and economical. By combining BP neural network and PID control and using BP neural network self-learning ability for online parameter tuning, this method optimizes the parameters of PID controller and applies this to the Fcc gas flow control to achieve the control of the final product- heavy oil concentration. Finally, through MATLAB simulation, it is found that the PID control based on BP neural network has better controlling effect than traditional PID control.

What can formal methods offer to digital flight control systems design

NASA Technical Reports Server (NTRS)

Good, Donald I.

1990-01-01

Formal methods research begins to produce methods which will enable mathematic modeling of the physical behavior of digital hardware and software systems. The development of these methods directly supports the NASA mission of increasing the scope and effectiveness of flight system modeling capabilities. The conventional, continuous mathematics that is used extensively in modeling flight systems is not adequate for accurate modeling of digital systems. Therefore, the current practice of digital flight control system design has not had the benefits of extensive mathematical modeling which are common in other parts of flight system engineering. Formal methods research shows that by using discrete mathematics, very accurate modeling of digital systems is possible. These discrete modeling methods will bring the traditional benefits of modeling to digital hardware and hardware design. Sound reasoning about accurate mathematical models of flight control systems can be an important part of reducing risk of unsafe flight control.

Dominance of sterilization and alternative choices of contraception in India: an appraisal of the socioeconomic impact.

PubMed

de Oliveira, Isabel Tiago; Dias, José G; Padmadas, Sabu S

2014-01-01

The recent decline in fertility in India has been unprecedented especially in southern India, where fertility is almost exclusively controlled by means of permanent contraceptive methods, mainly female sterilization, which constitutes about two-thirds of overall contraceptive use. Many Indian women undergo sterilization at relatively young ages as a consequence of early marriage and childbearing in short birth intervals. This research aims to investigate the socioeconomic factors determining the choices for alternative contraceptive choices against the dominant preference for sterilization among married women in India. Data for this study are drawn from the 2005-06 National Family Health Surveys focusing on a sample of married women who reported having used a method of contraception in the five years preceding the survey. A multilevel multinomial logit regression is used to estimate the impact of socioeconomic factors on contraceptive choices, differentiating temporary modern or traditional methods versus sterilization. Religious affiliation, women's education and occupation had overarching influence on method choices amongst recent users. Muslim women were at higher odds of choosing a traditional or modern temporary method than sterilization. Higher level of women's education increased the odds of modern temporary method choices but the education effect on traditional method choices was only marginally significant. Recent users belonging to wealthier households had higher odds of choosing modern methods over sterilization. Exposure to family planning messages through radio had a positive effect on modern and traditional method choices. Community variations in method choices were highly significant. The persistent dominance of sterilization in the Indian family planning programme is largely determined by socioeconomic conditions. Reproductive health programmes should address the socioeconomic barriers and consider multiple cost-effective strategies such as mass media to promote awareness of modern temporary methods.

Decoupled Modulation Control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Shaobu; Huang, Renke; Huang, Zhenyu

The objective of this research work is to develop decoupled modulation control methods for damping inter-area oscillations with low frequencies, so the damping control can be more effective and easier to design with less interference among different oscillation modes in the power system. A signal-decoupling algorithm was developed that can enable separation of multiple oscillation frequency contents and extraction of a “pure” oscillation frequency mode that are fed into Power System Stabilizers (PSSs) as the modulation input signals. As a result, instead of introducing interferences between different oscillation modes from the traditional approaches, the output of the new PSS modulationmore » control signal mainly affects only one oscillation mode of interest. The new decoupled modulation damping control algorithm has been successfully developed and tested on the standard IEEE 4-machine 2-area test system and a minniWECC system. The results are compared against traditional modulation controls, which demonstrates the validity and effectiveness of the newly-developed decoupled modulation damping control algorithm.« less

Low-power grating detection system chip for high-speed low-cost length and angle precision measurement

NASA Astrophysics Data System (ADS)

Hou, Ligang; Luo, Rengui; Wu, Wuchen

2006-11-01

This paper forwards a low power grating detection chip (EYAS) on length and angle precision measurement. Traditional grating detection method, such as resister chain divide or phase locked divide circuit are difficult to design and tune. The need of an additional CPU for control and display makes these methods' implementation more complex and costly. Traditional methods also suffer low sampling speed for the complex divide circuit scheme and CPU software compensation. EYAS is an application specific integrated circuit (ASIC). It integrates micro controller unit (MCU), power management unit (PMU), LCD controller, Keyboard interface, grating detection unit and other peripherals. Working at 10MHz, EYAS can afford 5MHz internal sampling rate and can handle 1.25MHz orthogonal signal from grating sensor. With a simple control interface by keyboard, sensor parameter, data processing and system working mode can be configured. Two LCD controllers can adapt to dot array LCD or segment bit LCD, which comprised output interface. PMU alters system between working and standby mode by clock gating technique to save power. EYAS in test mode (system action are more frequently than real world use) consumes 0.9mw, while 0.2mw in real world use. EYAS achieved the whole grating detection system function, high-speed orthogonal signal handling in a single chip with very low power consumption.

[Developing traditional Chinese medicine injection is the need for curing sickness to save patients].

PubMed

He, Ping; Li, Feng-Jie; Li, Lian-da; Li, Yi-Kui

2017-03-01

Safety issues of traditional Chinese medicine injections has been heated debate. There are two diametrically opposed views: it should be used reasonable and developed healthily or be forbidden to use. Some people have many misunderstandings and prejudices about the safety of traditional Chinese medicine injections. Compared with western medicine,traditional Chinese medicine has its own particularity. Traditional Chinese medicine has complex components. Its research and clinical application is different from western medicine. Adverse reactions of traditional Chinese medicine injections are related to many factors,such as a large number of irrational use,blind use of traditional Chinese medicine injections and western medicine injections,counterfeit and substandard drugs,incorrect methods of intravenous infusion,toxicity of supplementary materials,drug ingredients. Developing traditional Chinese medicine injection is the need for curing sickness to save patients. The purposeful, targeted, organized and planned systematic research of traditional Chinese medicine injections should be strengthened,especially the safety of traditional Chinese medicine. Strengthen supervision and control of rational drug use.Strengthen the examination and approval,supervision and management of all aspects to ensure the safety of patients. Copyright© by the Chinese Pharmaceutical Association.

A randomized control trial comparing use of a novel electrocardiogram simulator with traditional teaching in the acquisition of electrocardiogram interpretation skill.

PubMed

Fent, Graham; Gosai, Jivendra; Purva, Makani

2016-01-01

Accurate interpretation of the electrocardiogram (ECG) remains an essential skill for medical students and junior doctors. While many techniques for teaching ECG interpretation are described, no single method has been shown to be superior. This randomized control trial is the first to investigate whether teaching ECG interpretation using a computer simulator program or traditional teaching leads to improved scores in a test of ECG interpretation among medical students and postgraduate doctors immediately after and 3months following teaching. Participants' opinions of the program were assessed using a questionnaire. There were no differences in ECG interpretation test scores immediately after or 3months after teaching in the lecture or simulator groups. At present therefore, there is insufficient evidence to suggest that ECG simulator programs are superior to traditional teaching. Copyright © 2016 Elsevier Inc. All rights reserved.

MERCURY MEASUREMENTS USING DIRECT-ANALYZER METHODOLOGY

EPA Science Inventory

Under EPA's Water Quality Research Program, exposure studies are needed to determine how well control strategies and guidance are working. Consequently, reliable and convenient techniques that minimize waste production are of special interest. While traditional methods for determ...

Division by zero, pseudo-division by zero, Zhang dynamics method and Zhang-gradient method about control singularity conquering

NASA Astrophysics Data System (ADS)

Zhang, Yunong; Zhang, Yinyan; Chen, Dechao; Xiao, Zhengli; Yan, Xiaogang

2017-01-01

In this paper, the division-by-zero (DBO) problem in the field of nonlinear control, which is traditionally termed the control singularity problem (or specifically, controller singularity problem), is investigated by the Zhang dynamics (ZD) method and the Zhang-gradient (ZG) method. According to the impact of the DBO problem on the state variables of the controlled nonlinear system, the concepts of the pseudo-DBO problem and the true-DBO problem are proposed in this paper, which provide a new perspective for the researchers on the DBO problems as well as nonlinear control systems. Besides, the two classes of DBO problems are solved under the framework of the ZG method. Specific examples are shown and investigated in this paper to illustrate the two proposed concepts and the efficacy of the ZG method in conquering pseudo-DBO and true-DBO problems. The application of the ZG method to the tracking control of a two-wheeled mobile robot further substantiates the effectiveness of the ZG method. In addition, the ZG method is successfully applied to the tracking control of a pure-feedback nonlinear system.

A Quadrupole Dalton-based multi-attribute method for product characterization, process development, and quality control of therapeutic proteins.

PubMed

Xu, Weichen; Jimenez, Rod Brian; Mowery, Rachel; Luo, Haibin; Cao, Mingyan; Agarwal, Nitin; Ramos, Irina; Wang, Xiangyang; Wang, Jihong

2017-10-01

During manufacturing and storage process, therapeutic proteins are subject to various post-translational modifications (PTMs), such as isomerization, deamidation, oxidation, disulfide bond modifications and glycosylation. Certain PTMs may affect bioactivity, stability or pharmacokinetics and pharmacodynamics profile and are therefore classified as potential critical quality attributes (pCQAs). Identifying, monitoring and controlling these PTMs are usually key elements of the Quality by Design (QbD) approach. Traditionally, multiple analytical methods are utilized for these purposes, which is time consuming and costly. In recent years, multi-attribute monitoring methods have been developed in the biopharmaceutical industry. However, these methods combine high-end mass spectrometry with complicated data analysis software, which could pose difficulty when implementing in a quality control (QC) environment. Here we report a multi-attribute method (MAM) using a Quadrupole Dalton (QDa) mass detector to selectively monitor and quantitate PTMs in a therapeutic monoclonal antibody. The result output from the QDa-based MAM is straightforward and automatic. Evaluation results indicate this method provides comparable results to the traditional assays. To ensure future application in the QC environment, this method was qualified according to the International Conference on Harmonization (ICH) guideline and applied in the characterization of drug substance and stability samples. The QDa-based MAM is shown to be an extremely useful tool for product and process characterization studies that facilitates facile understanding of process impact on multiple quality attributes, while being QC friendly and cost-effective.

Relationships among Reading Performance, Locus of Control and Achievement for Marginal Admission Students.

ERIC Educational Resources Information Center

Pepper, Roger S.; Drexler, John A., Jr.

The first phase of the study was a 2 x 2 factorial design, with locus of control and instructional method (lecture and demonstration) as independent variables and honor point average (HPA) as the dependent variable. The second phase used correlational techniques to test the extent to which reading performance and traditional predictors of…

The Influence of Experiential Instruction on Urban Elementary Students' Knowledge of the Food and Fiber System.

ERIC Educational Resources Information Center

Mabie, Rachel; Baker, Matt

1996-01-01

Inner-city fifth and sixth graders were divided as follows: 56 conducted 10-week garden projects; 57 did short, in-class projects; and 31 controls were taught by traditional methods. Both treatment groups improved pretest knowledge of food and fiber by 70-80%, compared to 11% increase among controls. (SK)

Influence of microwave sterilization on the cutting capacity of carbide burs.

PubMed

Fais, Laiza Maria Grassi; Pinelli, Lígia Antunes Pereira; Adabo, Gelson Luis; Silva, Regina Helena Barbosa Tavares da; Marcelo, Caroline Canhizares; Guaglianoni, Dalton Geraldo

2009-01-01

This study compared the cutting capacity of carbide burs sterilized with microwaves and traditional sterilization methods. Sixty burs were divided into 5 groups according to the sterilization methods: dry heat (G1), autoclave (G2), microwave irradiation (G3), glutaraldehyde (G4) or control - no sterilization (G5). The burs were used to cut glass plates in a cutting machine set for twelve 2.5-min periods and, after each period, they were sterilized (except G5) following the protocol established for each group. The cutting capacity of the burs was determined by a weight-loss method. Data were analyzed statistically by Kruskal-Wallis and Dunn's test. The means of the cutting amount performed by each group after the 12 periods were G1 = 0.2167 +/- 0.0627 g; G2 = 0.2077 +/- 0.0231 g; G3 = 0.1980 +/- 0.0326 g; G4 = 0.1203 +/- 0.0459 g; G5 = 0.2642 +/- 0.0359 g. There were statistically significant differences among the groups (p<0.05); only dry heat sterilization was similar to the control. Sterilization by dry heat was the method that least affected the cutting capacity of the carbide burs and microwave sterilization was not better than traditional sterilization methods.

Genetic Algorithm-Based Motion Estimation Method using Orientations and EMGs for Robot Controls

PubMed Central

Chae, Jeongsook; Jin, Yong; Sung, Yunsick

2018-01-01

Demand for interactive wearable devices is rapidly increasing with the development of smart devices. To accurately utilize wearable devices for remote robot controls, limited data should be analyzed and utilized efficiently. For example, the motions by a wearable device, called Myo device, can be estimated by measuring its orientation, and calculating a Bayesian probability based on these orientation data. Given that Myo device can measure various types of data, the accuracy of its motion estimation can be increased by utilizing these additional types of data. This paper proposes a motion estimation method based on weighted Bayesian probability and concurrently measured data, orientations and electromyograms (EMG). The most probable motion among estimated is treated as a final estimated motion. Thus, recognition accuracy can be improved when compared to the traditional methods that employ only a single type of data. In our experiments, seven subjects perform five predefined motions. When orientation is measured by the traditional methods, the sum of the motion estimation errors is 37.3%; likewise, when only EMG data are used, the error in motion estimation by the proposed method was also 37.3%. The proposed combined method has an error of 25%. Therefore, the proposed method reduces motion estimation errors by 12%. PMID:29324641

Effectiveness of a computer-based tutorial for teaching how to make a blood smear.

PubMed

Preast, Vanessa; Danielson, Jared; Bender, Holly; Bousson, Maury

2007-09-01

Computer-aided instruction (CAI) was developed to teach veterinary students how to make blood smears. This instruction was intended to replace the traditional instructional method in order to promote efficient use of faculty resources while maintaining learning outcomes and student satisfaction. The purpose of this study was to evaluate the effect of a computer-aided blood smear tutorial on 1) instructor's teaching time, 2) students' ability to make blood smears, and 3) students' ability to recognize smear quality. Three laboratory sessions for senior veterinary students were taught using traditional methods (control group) and 4 sessions were taught using the CAI tutorial (experimental group). Students in the control group received a short demonstration and lecture by the instructor at the beginning of the laboratory and then practiced making blood smears. Students in the experimental group received their instruction through the self-paced, multimedia tutorial on a laptop computer and then practiced making blood smears. Data was collected from observation, interview, survey questionnaires, and smear evaluation by students and experts using a scoring rubric. Students using the CAI made better smears and were better able to recognize smear quality. The average time the instructor spent in the room was not significantly different between groups, but the quality of the instructor time was improved with the experimental instruction. The tutorial implementation effectively provided students and instructors with a teaching and learning experience superior to the traditional method of instruction. Using CAI is a viable method of teaching students to make blood smears.

Particle Swarm-Based Translation Control for Immersed Tunnel Element in the Hong Kong-Zhuhai-Macao Bridge Project

NASA Astrophysics Data System (ADS)

Li, Jun-jun; Yang, Xiao-jun; Xiao, Ying-jie; Xu, Bo-wei; Wu, Hua-feng

2018-03-01

Immersed tunnel is an important part of the Hong Kong-Zhuhai-Macao Bridge (HZMB) project. In immersed tunnel floating, translation which includes straight and transverse movements is the main working mode. To decide the magnitude and direction of the towing force for each tug, a particle swarm-based translation control method is presented for non-power immersed tunnel element. A sort of linear weighted logarithmic function is exploited to avoid weak subgoals. In simulation, the particle swarm-based control method is evaluated and compared with traditional empirical method in the case of the HZMB project. Simulation results show that the presented method delivers performance improvement in terms of the enhanced surplus towing force.

Parent Mentors and Insuring Uninsured Children: A Randomized Controlled Trial

PubMed Central

Lin, Hua; Walker, Candy; Lee, Michael; Currie, Janet M.; Allgeyer, Rick; Fierro, Marco; Henry, Monica; Portillo, Alberto; Massey, Kenneth

2016-01-01

BACKGROUND: Six million US children are uninsured, despite two-thirds being eligible for Medicaid/Children’s Health Insurance Program (CHIP), and minority children are at especially high risk. The most effective way to insure uninsured children, however, is unclear. METHODS: We conducted a randomized trial of the effects of parent mentors (PMs) on insuring uninsured minority children. PMs were experienced parents with ≥1 Medicaid/CHIP-covered child who received 2 days of training, then assisted families for 1 year with insurance applications, retaining coverage, medical homes, and social needs; controls received traditional Medicaid/CHIP outreach. The primary outcome was obtaining insurance 1 year post-enrollment. RESULTS: We enrolled 237 participants (114 controls; 123 in PM group). PMs were more effective (P< .05 for all comparisons) than traditional methods in insuring children (95% vs 68%), and achieving faster coverage (median = 62 vs 140 days), high parental satisfaction (84% vs 62%), and coverage renewal (85% vs 60%). PM children were less likely to have no primary care provider (15% vs 39%), problems getting specialty care (11% vs 46%), unmet preventive (4% vs 22%) or dental (18% vs 31%) care needs, dissatisfaction with doctors (6% vs 16%), and needed additional income for medical expenses (6% vs 13%). Two years post-PM cessation, more PM children were insured (100% vs 76%). PMs cost $53.05 per child per month, but saved $6045.22 per child insured per year. CONCLUSIONS: PMs are more effective than traditional Medicaid/CHIP methods in insuring uninsured minority children, improving health care access, and achieving parental satisfaction, but are inexpensive and highly cost-effective. PMID:27244706

A clinically guided approach for improving performance measurement for hypertension.

PubMed

Steinman, Michael A; Lee, Sei J; Peterson, Carolyn A; Fung, Kathy Z; Goldstein, Mary K

2012-05-01

Performance measures often fail to account for legitimate reasons why patients do not achieve recommended treatment targets. We tested a novel performance measurement system for blood pressure (BP) control that was designed to mimic clinical reasoning. This clinically guided approach focuses on (1) exempting patients for whom tight BP control may not be appropriate or feasible and (2) assessing BP over time. Trained abstractors conducted structured chart reviews of 201 adults with hypertension in 2 VA health care systems. Results were compared with traditional methods of performance measurement. Among 201 veterans, 183 (91%) were male, and the mean age was 71±11 years. Using the clinically guided approach, 61 patients (30%) were exempted from performance measurement. The most common reasons for exemption were inadequate opportunity to manage BP (35 patients, 17%) and the use of 4 or more antihypertensive medications (19 patients, 9%). Among patients eligible for performance measurement, there was little agreement on the presence of controlled versus uncontrolled BP when comparing the most recent BP (the traditional approach) with an integrated assessment of BP control (κ 0.14). After accounting for clinically guided exemptions and methods of BP assessment, only 15 of 72 patients (21%) whose last BP was ≥140/90 mm Hg were classified as problematic by the clinically guided approach. Many patients have legitimate reasons for not achieving tight BP control, and the methods used for BP assessment have marked effects on whether a patient is classified as having adequate or inadequate BP control.

Stable adaptive PI control for permanent magnet synchronous motor drive based on improved JITL technique.

PubMed

Zheng, Shiqi; Tang, Xiaoqi; Song, Bao; Lu, Shaowu; Ye, Bosheng

2013-07-01

In this paper, a stable adaptive PI control strategy based on the improved just-in-time learning (IJITL) technique is proposed for permanent magnet synchronous motor (PMSM) drive. Firstly, the traditional JITL technique is improved. The new IJITL technique has less computational burden and is more suitable for online identification of the PMSM drive system which is highly real-time compared to traditional JITL. In this way, the PMSM drive system is identified by IJITL technique, which provides information to an adaptive PI controller. Secondly, the adaptive PI controller is designed in discrete time domain which is composed of a PI controller and a supervisory controller. The PI controller is capable of automatically online tuning the control gains based on the gradient descent method and the supervisory controller is developed to eliminate the effect of the approximation error introduced by the PI controller upon the system stability in the Lyapunov sense. Finally, experimental results on the PMSM drive system show accurate identification and favorable tracking performance. Copyright © 2013 ISA. Published by Elsevier Ltd. All rights reserved.

The role side effects play in the choice of antiepileptic therapy in brain tumor-related epilepsy: a comparative study on traditional antiepileptic drugs versus oxcarbazepine

PubMed Central

Maschio, Marta; Dinapoli, Loredana; Vidiri, Antonello; Pace, Andrea; Fabi, Alessandra; Pompili, Alfredo; Carapella, Maria Carmine; Jandolo, Bruno

2009-01-01

Background Seizure control doesn't represent the only challenging goal in patients with brain tumor-related epilepsy. Side effects have often taken precedence for patients' quality of life. Methods We performed an observational retrospective study on patients with brain tumor-related epilepsy: 35 who had assumed oxcarbazepine monotherapy and 35 patients who had undergone treatment with traditional antiepileptic drugs. Primary variable of efficacy was the mean seizure frequency per month and safety variables were the drop-out for side effects and total incidence of side effects. We applied the Propensity Score technique to minimize selection bias. Results Our results showed a similar efficacy of oxcarbazepine and traditional antiepileptic drugs over time, but the difference in safety and tolerability between the two groups was significant: traditional AEDs caused more side effects, both serious and non serious. Conclusion This study highlights the importance of taking into consideration not only seizure control but also the appearance of side effects when choosing antiepileptic drugs in this patients population. PMID:19419544

The Impact of a Modified Moore Method on Efficacy and Performance in Precalculus

ERIC Educational Resources Information Center

Cooper, Thomas E.; Bailey, Brad; Briggs, Karen

2012-01-01

In this study, one section of undergraduate Precalculus was taught using a modified Moore method, a student centered inquiry-based approach, and two control sections were taught in a traditional lecture format. A survey of attitudes, beliefs, and efficacy toward mathematics and Precalculus was administered at the beginning and end of the semester…

Web-Based Distance Learning: Substitute or Alternative to the Traditional Classroom--Making the Delivery Method Decision

ERIC Educational Resources Information Center

Hunt, David Marshall

2005-01-01

When a distance learning program administrator makes the critical choice of delivery methods, she/he needs to consider factors such as program developer centrism, international experience, cultural similarity, and desired level of control which will all be elaborated on in this article. The aim of this manuscript is to assist international…

The Effect of Process Oriented Guided Inquiry Learning (POGIL) on 11th Graders' Conceptual Understanding of Electrochemistry

ERIC Educational Resources Information Center

Sen, Senol; Yilmaz, Ayhan; Geban, Ömer

2016-01-01

The purpose of this study was to investigate the effect of Process Oriented Guided Inquiry Learning (POGIL) method compared to traditional teaching method on 11th grade students' conceptual understanding of electrochemistry concepts. Participants were 115 students from a public school in Turkey. Nonequivalent control group design was used. Two…

Methods for Improving Information from "Undesigned" Human Factors Experiments. Technical Report No. p75-287.

ERIC Educational Resources Information Center

Simon, Charles W.

An "undesigned" experiment is one in which the predictor variables are correlated, either due to a failure to complete a design or because the investigator was unable to select or control relevant experimental conditions. The traditional method of analyzing this class of experiment--multiple regression analysis based on a least squares…

Rehabilitation for the management of knee osteoarthritis using comprehensive traditional Chinese medicine in community health centers: study protocol for a randomized controlled trial

PubMed Central

2013-01-01

Background It is becoming increasingly necessary for community health centers to make rehabilitation services available to patients with osteoarthritis of the knee. However, for a number of reasons, including a lack of expertise, the small size of community health centers and the availability of only simple medical equipment, conventional rehabilitation therapy has not been widely used in China. Consequently, most patients with knee osteoarthritis seek treatment in high-grade hospitals. However, many patients cannot manage the techniques that they were taught in the hospital. Methods such as acupuncture, tuina, Chinese medical herb fumigation-washing and t’ai chi are easy to do and have been reported to have curative effects in those with knee osteoarthritis. To date, there have been no randomized controlled trials validating comprehensive traditional Chinese medicine for the rehabilitation of knee osteoarthritis in a community health center. Furthermore, there is no standard rehabilitation protocol using traditional Chinese medicine for knee osteoarthritis. The aim of the current study is to develop a comprehensive rehabilitation protocol using traditional Chinese medicine for the management of knee osteoarthritis in a community health center. Method/design This will be a randomized controlled clinical trial with blinded assessment. There will be a 4-week intervention utilizing rehabilitation protocols from traditional Chinese medicine and conventional therapy. Follow-up will be conducted for a period of 12 weeks. A total of 722 participants with knee osteoarthritis will be recruited. Participants will be randomly divided into two groups: experimental and control. Primary outcomes will include range of motion, girth measurement, the visual analogue scale, and results from the manual muscle, six-minute walking and stair-climbing tests. Secondary outcomes will include average daily consumption of pain medication, ability to perform daily tasks and health-related quality-of-life assessments. Other outcomes will include rate of adverse events and economic effects. Relative cost-effectiveness will be determined from health service usage and outcome data. Discussion The primary aim of this trial is to develop a standard protocol for traditional Chinese medicine, which can be adopted by community health centers in China and worldwide, for the rehabilitation of patients with knee osteoarthritis. Trial registration Clinical Trials Registration: ChiCTR-TRC-12002538 PMID:24188276

Research on Acceleration Compensation Strategy of Electric Vehicle Based on Fuzzy Control Theory

NASA Astrophysics Data System (ADS)

Zhu, Tianjun; Li, Bin; Zong, Changfu; Wei, Zhicheng

2017-09-01

Nowadays, the driving technology of electric vehicle is developing rapidly. There are many kinds of methods in driving performance control technology. The paper studies the acceleration performance of electric vehicle. Under the premise of energy management, an acceleration power compensation method by fuzzy control theory based on driver intention recognition is proposed, which can meet the driver’s subjective feelings better. It avoids the problem that the pedal opening and power output are single correspondence when the traditional vehicle accelerates. Through the simulation test, this method can significantly improve the performance of acceleration and output torque smoothly in non-emergency acceleration to ensure vehicle comfortable and stable.

[Embryo selection in IVF/ICSI cycles using time-lapse microscopy and the clinical outcomes].

PubMed

Chen, Minghao; Huang, Jun; Zhong, Ying; Quan, Song

2015-12-01

To compare the clinical outcomes of embryos selected using time-lapse microscopy and traditional morphological method in IVF/ICSI cycles and evaluate the clinical value of time-lapse microscopy in early embryo monitoring and selection. e retrospectively analyzed the clinical data of 139 IVF/ICSI cycles with embryo selection based on time-lapse monitoring (TLM group, n=68) and traditional morphological method (control group, n=71). The βHCG-positive rate, clinical pregnancy rate and embryo implantation rate were compared between the 2 groups. Subgroup analysis was performed in view of female patients age and the fertilization type. The βHCG-positive rate, clinical pregnancy rate and implantation rate were 66.2%, 61.8% and 47.1% in TLM group, significantly higher than those in the control group (47.9%, 43.7% and 30.3%, respectively; P<0.05). Compared with patients below 30 years of age, patients aged between 31 and 35 years benefited more from time-lapse monitoring with improved clinical outcomes. time-lapse monitoring significantly increased the βHCG-positive rate, clinical pregnancy rate and implantation rate for patients undergoing IVF cycles, but not for those undergoing ICSI or TESA cycles. Compared with those selected using traditional morphological method, the embryos selected with time-lapse microscopy have better clinical outcomes, especially in older patients (31-35 years of age) and in IVF cycles.

[Methodological quality evaluation of randomized controlled trials for traditional Chinese medicines for treatment of sub-health].

PubMed

Zhao, Jun; Liao, Xing; Zhao, Hui; Li, Zhi-Geng; Wang, Nan-Yue; Wang, Li-Min

2016-11-01

To evaluate the methodological quality of the randomized controlled trials(RCTs) for traditional Chinese medicines for treatment of sub-health, in order to provide a scientific basis for the improvement of clinical trials and systematic review. Such databases as CNKI, CBM, VIP, Wanfang, EMbase, Medline, Clinical Trials, Web of Science and Cochrane Library were searched for RCTS for traditional Chinese medicines for treatment of sub-health between the time of establishment and February 29, 2016. Cochrane Handbook 5.1 was used to screen literatures and extract data, and CONSORT statement and CONSORT for traditional Chinese medicine statement were adopted as the basis for quality evaluation. Among the 72 RCTs included in this study, 67 (93.05%) trials described the inter-group baseline data comparability, 39(54.17%) trials described the unified diagnostic criteria, 28(38.89%) trials described the unified standards of efficacy, 4 (5.55%) trials mentioned the multi-center study, 19(26.38%) trials disclosed the random distribution method, 6(8.33%) trials used the random distribution concealment, 15(20.83%) trials adopted the method of blindness, 3(4.17%) study reported the sample size estimation in details, 5 (6.94%) trials showed a sample size of more than two hundred, 19(26.38%) trials reported the number of withdrawal, defluxion cases and those lost to follow-up, but only 2 trials adopted the ITT analysis,10(13.89%) trials reported the follow-up results, none of the trial reported the test registration and the test protocol, 48(66.7%) trials reported all of the indicators of expected outcomes, 26(36.11%) trials reported the adverse reactions and adverse events, and 4(5.56%) trials reported patient compliance. The overall quality of these randomized controlled trials for traditional Chinese medicines for treatment of sub-health is low, with methodological defects in different degrees. Therefore, it is still necessary to emphasize the correct application of principles such as blindness, randomization and control in RCTs, while requiring reporting in accordance with international standards. Copyright© by the Chinese Pharmaceutical Association.

[Effects of mechanical transplanting of rice with controlled release bulk blending fertilizer on rice yield and soil fertility].

PubMed

Zhang, Xuan; Ding, Jun-Shan; Liu, Yan-Ling; Gu, Yan; Han, Ke-Feng; Wu, Liang-Huan

2014-03-01

Abstract: A 2-year field experiment with a yellow-clay paddy soil in Zhejiang Province was conducted to study the effects of different planting measures combined with different fertilization practices on rice yield, soil nutrients, microbial biomass C and N and activities of urease, phosphatase, sucrase and hydrogen peroxidase at the maturity stage. Results showed that mechanical transplanting of rice with controlled release bulk blending (BB) fertilizer (BBMT) could achieve a significantly higher mean yield than traditional manual transplanting with traditional fertilizer (TFTM) and direct seeding with controlled release BB fertilizer (BBDS) by 16.3% and 27.0%, respectively. The yield by BBMT was similar to that by traditional manual transplanting with controlled release BB fertilizer (BBTM). Compared with TFTM, BBMT increased the contents of soil total-N, available N, available P and microbial biomass C, and the activities of urease, sucrase and hydrogen peroxidase by 21.5%, 13.6%, 41.2%, 27.1%, 50.0%, 22.5% and 46.2%, respectively. Therefore, BBMT, a simple high-efficiency rice cultivation method with use of a light-weighted mechanical transplanter, should be widely promoted and adopted.

Photobiomolecular deposition of metallic particles and films

DOEpatents

Hu, Zhong-Cheng

2005-02-08

The method of the invention is based on the unique electron-carrying function of a photocatalytic unit such as the photosynthesis system I (PSI) reaction center of the protein-chlorophyll complex isolated from chloroplasts. The method employs a photo-biomolecular metal deposition technique for precisely controlled nucleation and growth of metallic clusters/particles, e.g., platinum, palladium, and their alloys, etc., as well as for thin-film formation above the surface of a solid substrate. The photochemically mediated technique offers numerous advantages over traditional deposition methods including quantitative atom deposition control, high energy efficiency, and mild operating condition requirements.

Photobiomolecular metallic particles and films

DOEpatents

Hu, Zhong-Cheng

2003-05-06

The method of the invention is based on the unique electron-carrying function of a photocatalytic unit such as the photosynthesis system I (PSI) reaction center of the protein-chlorophyll complex isolated from chloroplasts. The method employs a photo-biomolecular metal deposition technique for precisely controlled nucleation and growth of metallic clusters/particles, e.g., platinum, palladium, and their alloys, etc., as well as for thin-film formation above the surface of a solid substrate. The photochemically mediated technique offers numerous advantages over traditional deposition methods including quantitative atom deposition control, high energy efficiency, and mild operating condition requirements.

A Multi-agent Based Cooperative Voltage and Reactive Power Control

NASA Astrophysics Data System (ADS)

Ishida, Masato; Nagata, Takeshi; Saiki, Hiroshi; Shimada, Ikuhiko; Hatano, Ryousuke

In order to maintain system voltage within the optimal range and prevent voltage instability phenomena before they occur, a variety of phase modifying equipment is installed in optimal locations throughout the power system network and a variety of methods of voltage reactive control are employed. The proposed system divided the traditional method to control voltage and reactive power into two sub problems; “voltage control” to adjust the secondary bus voltage of substations, and “reactive power control” to adjust the primary bus voltage. In this system, two types of agents are installed in substations in order to cooperate “voltage control” and “reactive power control”. In order to verify the performance of the proposed method, it has been applied to the model network system. The results confirm that our proposed method is able to control violent fluctuations in load.

Can Facebook Be Used for Research? Experiences Using Facebook to Recruit Pregnant Women for a Randomized Controlled Trial

PubMed Central

Adam, Laura M; Manca, Donna P

2016-01-01

Background Recruitment is often a difficult and costly part of any human research study. Social media and other emerging means of mass communication hold promise as means to complement traditional strategies used for recruiting participants because they can reach a large number of people in a short amount of time. With the ability to target a specified audience, paid Facebook advertisements have potential to reach future research participants of a specific demographic. This paper describes the experiences of a randomized controlled trial in Edmonton, Alberta, attempting to recruit healthy pregnant women between 8 and 20 weeks’ gestation for participation in a prenatal study. Various traditional recruitment approaches, in addition to paid Facebook advertisements were trialed. Objective To evaluate the effectiveness of paid advertisements on Facebook as a platform for recruiting pregnant women to a randomized controlled trial in comparison with traditional recruitment approaches. Methods Recruitment using traditional approaches occurred for 7 months, whereas Facebook advertisements ran for a total of 26 days. Interested women were prompted to contact the study staff for a screening call to determine study eligibility. Costs associated with each recruitment approach were recorded and used to calculate the cost to recruit eligible participants. Performance of Facebook advertisements was monitored using Facebook Ads Manager. Results Of the 115 women included, 39.1% (n=45) of the women who contacted study staff heard about the study through Facebook, whereas 60.9% (n=70) of them heard about it through traditional recruitment approaches. During the 215 days (~7 months) that the traditional approaches were used, the average rate of interest was 0.3 (0.2) women/day, whereas the 26 days of Facebook advertisements resulted in an average rate of interest of 2.8 (1.7) women/day. Facebook advertisements cost Can $506.91 with a cost per eligible participant of Cad $20.28. In comparison, the traditional approaches cost Cad $1087, with approximately Cad $24.15 per eligible participant. Demographic characteristics of women were similar between the 2 recruitment methods except that women recruited using Facebook were significantly earlier in their pregnancy than those recruited using traditional approaches (P<.03). Conclusions Paid Facebook advertisements hold promise as a platform for reaching pregnant women. The relative ease of placing an advertisement, the comparable cost per participant recruited, and the dramatically improved recruitment rates in comparison with traditional approaches highlight the importance of combining novel and traditional recruitment approaches to recruit women for pregnancy-related studies. Trial Registration ClinicalTrials.gov NCT02711644; https://clinicaltrials.gov/ct2/show/NCT02711644 (Archived by WebCite at http://www.webcitation.org/6kKpagpMk) PMID:27655184

INFLUENCE OF MICROWAVE STERILIZATION ON THE CUTTING CAPACITY OF CARBIDE BURS

PubMed Central

Fais, Laiza Maria Grassi; Pinelli, Lígia Antunes Pereira; Adabo, Gelson Luis; da Silva, Regina Helena Barbosa Tavares; Marcelo, Caroline Canhizares; Guaglianoni, Dalton Geraldo

2009-01-01

Objective: This study compared the cutting capacity of carbide burs sterilized with microwaves and traditional sterilization methods. Material and Methods: Sixty burs were divided into 5 groups according to the sterilization methods: dry heat (G1), autoclave (G2), microwave irradiation (G3), glutaraldehyde (G4) or control – no sterilization (G5). The burs were used to cut glass plates in a cutting machine set for twelve 2.5-min periods and, after each period, they were sterilized (except G5) following the protocol established for each group. The cutting capacity of the burs was determined by a weight-loss method. Data were analyzed statistically by Kruskal-Wallis and Dunn's test. Results: The means of the cutting amount performed by each group after the 12 periods were G1 = 0.2167 ± 0.0627 g; G2 = 0.2077 ± 0.0231 g; G3 = 0.1980 ± 0.0326 g; G4 = 0.1203 ± 0.0459 g; G5 = 0.2642 ± 0.0359 g. There were statistically significant differences among the groups (p<0.05); only dry heat sterilization was similar to the control. Conclusion: Sterilization by dry heat was the method that least affected the cutting capacity of the carbide burs and microwave sterilization was not better than traditional sterilization methods. PMID:20027431

A comparison of the cooperative learning and traditional learning methods in theory classes on nursing students' communication skill with patients at clinical settings.

PubMed

Baghcheghi, Nayereh; Koohestani, Hamid Reza; Rezaei, Koresh

2011-11-01

The purpose of this study was to compare the effect of traditional learning and cooperative learning methods on nursing students' communication skill with patients. This was an experimental study in which 34 nursing students in their 2nd semester of program participated. They were divided randomly into two groups, a control group who were taught their medical/surgical nursing course by traditional learning method and an experimental group, who were taught the same material using cooperative learning method. Before and after the teaching intervention, the students' communication skills with patients at clinical settings were examined. The results showed that no significant difference between the two groups in students' communication skills scores before the teaching intervention, but did show a significant difference between the two groups in the interaction skills and problem follow up sub-scales scores after the teaching intervention. This study provides evidence that cooperative learning is an effective method for improving and increasing communication skills of nursing students especially in interactive skills and follow up the problems sub-scale, thereby it is recommended to increase nursing students' participation in arguments by applying active teaching methods which can provide the opportunity for increased communication skills. Copyright © 2011 Elsevier Ltd. All rights reserved.

Alternative Approaches to Evaluation in Empirical Microeconomics

ERIC Educational Resources Information Center

Blundell, Richard; Dias, Monica Costa

2009-01-01

This paper reviews some of the most popular policy evaluation methods in empirical microeconomics: social experiments, natural experiments, matching, instrumental variables, discontinuity design, and control functions. It discusses identification of traditionally used average parameters and more complex distributional parameters. The adequacy,…

Snow and ice control at extreme temperatures.

DOT National Transportation Integrated Search

2011-04-25

As expected, most state and provincial DOTs that we spoke with are using traditional methods to prevent and : remove snow and ice at very low temperatures. In addition to a review of current research, we spoke with six winter : maintenance profession...

Theory and practice for measuring health care quality

PubMed Central

Berwick, Donald M.; Knapp, Marian Gilbert

1987-01-01

As competition, cost control, and new modes of delivery emerge in health care, there is a need to reexamine both the traditional definitions of health care quality and the methods by which it is measured. Industries other than health care have much to teach regarding the methods for obtaining, analyzing, and displaying data; techniques for problem identification, problem solving, and reassessment; and ideas about organizational factors that produce a high quality product or service. The Quality-of-Care Measurement Department at the Harvard Community Health Plan has built a program that draws from a distinguished health care quality assurance tradition and incorporates techniques that have been successful in other industries. PMID:10312319

New ideas for teaching electrocardiogram interpretation and improving classroom teaching content.

PubMed

Zeng, Rui; Yue, Rong-Zheng; Tan, Chun-Yu; Wang, Qin; Kuang, Pu; Tian, Pan-Wen; Zuo, Chuan

2015-01-01

Interpreting an electrocardiogram (ECG) is not only one of the most important parts of diagnostics but also one of the most difficult areas to teach. Owing to the abstract nature of the basic theoretical knowledge of the ECG, its scattered characteristics, and tedious and difficult-to-remember subject matter, teaching how to interpret ECGs is as difficult for teachers to teach as it is for students to learn. In order to enable medical students to master basic knowledge of ECG interpretation skills in a limited teaching time, we modified the content used for traditional ECG teaching and now propose a new ECG teaching method called the "graphics-sequence memory method." A prospective randomized controlled study was designed to measure the actual effectiveness of ECG learning by students. Two hundred students were randomly placed under a traditional teaching group and an innovative teaching group, with 100 participants in each group. The teachers in the traditional teaching group utilized the traditional teaching outline, whereas the teachers in the innovative teaching group received training in line with the proposed teaching method and syllabus. All the students took an examination in the final semester by analyzing 20 ECGs from real clinical cases and submitted their ECG reports. The average ECG reading time was 32 minutes for the traditional teaching group and 18 minutes for the innovative teaching group. The average ECG accuracy results were 43% for the traditional teaching group and 77% for the innovative teaching group. Learning to accurately interpret ECGs is an important skill in the cardiac discipline, but the ECG's mechanisms are intricate and the content is scattered. Textbooks tend to make the students feel confused owing to the restrictions of the length and the format of the syllabi, apart from many other limitations. The graphics-sequence memory method was found to be a useful method for ECG teaching.

New design deforming controlling system of the active stressed lap

NASA Astrophysics Data System (ADS)

Ying, Li; Wang, Daxing

2008-07-01

A 450mm diameter active stressed lap has been developed in NIAOT by 2003. We design a new lap in 2007. This paper puts on emphases on introducing the new deforming control system of the lap. Aiming at the control characteristic of the lap, a new kind of digital deforming controller is designed. The controller consists of 3 parts: computer signal disposing, motor driving and force sensor signal disposing. Intelligent numeral PID method is applied in the controller instead of traditional PID. In the end, the result of new deformation are given.

Financial analysis of East Coast fever control strategies in traditionally managed Sanga cattle in Central Province of Zambia.

PubMed

Minjauw, B; Rushton, J; James, A D; Upton, M

1999-01-01

Five different East Coast fever (ECF)-control strategies (involving ECF immunisation by the infection-and-treatment method) were tested in groups of traditionally managed Sanga cattle in the Central Province of Zambia over a period of 2.5 years. Two groups were under intensive tick control (weekly spraying with acaricide)--one group immunised and the other non-immunised. Two groups were under no tick control--one group immunised and the other non-immunised. The fifth group was under seasonal tick control (18 sprays/year) and was immunised against ECF. The input and output data were used to construct discounted cash flows for each group. The seasonally sprayed and immunised group gave the highest net present value, and the non-immunised group with no tick control, the lowest. A break-even analysis showed that the immunisation costs could rise to US$25.9 per animal before profitability was affected. For herds under intensive tick control, immunisation was of no financial benefit. The results demonstrate the value of immunisation, and indicate the importance of its combination with seasonal tick-control measures.

Olympic weightlifting training improves vertical jump height in sportspeople: a systematic review with meta-analysis.

PubMed

Hackett, Daniel; Davies, Tim; Soomro, Najeebullah; Halaki, Mark

2016-07-01

This systematic review was conducted to evaluate the effect of Olympic weightlifting (OW) on vertical jump (VJ) height compared to a control condition, traditional resistance training and plyometric training. Five electronic databases were searched using terms related to OW and VJ. Studies needed to include at least one OW exercise, an intervention lasting ≥6 weeks; a comparison group of control, traditional resistance training or plyometric training; and to have measured VJ height. The methodological quality of studies was assessed using the Downs and Black Checklist. Random and fixed effects meta-analyses were performed to pool the results of the included studies and generate a weighted mean effect size (ES). Six studies (seven articles) were included in the meta-analyses and described a total of 232 participants (175 athletes and 57 physical education students) with resistance training experience, aged 19.5±2.2 years. Three studies compared OW versus control; four studies compared OW versus traditional resistance training; and three studies compared OW versus plyometric training. Meta-analyses indicated OW improved VJ height by 7.7% (95% CI 3.4 to 5.4 cm) compared to control (ES=0.62, p=0.03) and by 5.1% (95% CI 2.2 to 3.0 cm) compared to traditional resistance training (ES=0.64 p=0.00004). Change in VJ height was not different for OW versus plyometric training. OW is an effective training method to improve VJ height. The similar effects observed for OW and plyometric training on VJ height suggests that either of these methods would be beneficial when devising training programmes to improve VJ height. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

A comparison between computer-controlled and set work rate exercise based on target heart rate

NASA Technical Reports Server (NTRS)

Pratt, Wanda M.; Siconolfi, Steven F.; Webster, Laurie; Hayes, Judith C.; Mazzocca, Augustus D.; Harris, Bernard A., Jr.

1991-01-01

Two methods are compared for observing the heart rate (HR), metabolic equivalents, and time in target HR zone (defined as the target HR + or - 5 bpm) during 20 min of exercise at a prescribed intensity of the maximum working capacity. In one method, called set-work rate exercise, the information from a graded exercise test is used to select a target HR and to calculate a corresponding constant work rate that should induce the desired HR. In the other method, the work rate is controlled by a computer algorithm to achieve and maintain a prescribed target HR. It is shown that computer-controlled exercise is an effective alternative to the traditional set work rate exercise, particularly when tight control of cardiovascular responses is necessary.

Enzymatic control of biological deposits in papermaking.

PubMed

Hatcher, H J

1984-01-01

Deposit control in the pulp and paper industry has traditionally been accomplished by the use of toxic biocides. A method has been found whereby biological deposits can be controlled by the use of an enzyme-based product. Numerous field studies have been conducted successfully and photographs prepared illustrating the process. The dynamics of deposit formation and problems associated with such formations have been the subject of considerable study. Development and control of deposit problems under different paper mill conditions using the chemical-biochemical approach will be discussed.

Body weight supported treadmill training versus traditional training in patients dependent on walking assistance after stroke: a randomized controlled trial.

PubMed

Høyer, Ellen; Jahnsen, Reidun; Stanghelle, Johan Kvalvik; Strand, Liv Inger

2012-01-01

Treadmill training with body weight support (TTBWS) for relearning walking ability after brain damage is an approach under current investigation. Efficiency of this method beyond traditional training is lacking evidence, especially in patients needing walking assistance after stroke. The objective of this study was to investigate change in walking and transfer abilities, comparing TTBWS with traditional walking training. A single-blinded, randomized controlled trial was conducted. Sixty patients referred for multi-disciplinary primary rehabilitation were assigned into one of two intervention groups, one received 30 sessions of TTBWS plus traditional training, the other traditional training alone. Daily training was 1 hr. Outcome measures were Functional Ambulation Categories (FAC), Walking, Functional Independence Measure (FIM); shorter transfer and stairs, 10 m and 6-min walk tests. Substantial improvements in walking and transfer were shown within both groups after 5 and 11 weeks of intervention. Overall no statistical significant differences were found between the groups, but 12 of 17 physical measures tended to show improvements in favour of the treadmill approach. Both training strategies provided significant improvements in the tested activities, suggesting that similar outcomes can be obtained in the two modalities by systematic, intensive and goal directed training.

Anxiety and performance of nursing students in regard to assessment via clinical simulations in the classroom versus filmed assessments.

PubMed

de Souza Teixeira, Carla Regina; Kusumota, Luciana; Alves Pereira, Marta Cristiane; Merizio Martins Braga, Fernanda Titareli; Pirani Gaioso, Vanessa; Mara Zamarioli, Cristina; Campos de Carvalho, Emilia

2014-01-01

To compare the level of anxiety and performance of nursing students when performing a clinical simulation through the traditional method of assessment with the presence of an evaluator and through a filmed assessment without the presence of an evaluator. Controlled trial with the participation of Brazilian public university 20 students who were randomly assigned to one of two groups: a) assessment through the traditional method with the presence of an evaluator; or b) filmed assessment. The level of anxiety was assessed using the Zung test and performance was measured based on the number of correct answers. Averages of 32 and 27 were obtained on the anxiety scale by the group assessed through the traditional method before and after the simulation, respectively, while the filmed group obtained averages of 33 and 26; the final scores correspond to mild anxiety. Even though there was a statistically significant reduction in the intra-groups scores before and after the simulation, there was no difference between the groups. As for the performance assessments in the clinical simulation, the groups obtained similar percentages of correct answers (83% in the traditional assessment and 84% in the filmed assessment) without statistically significant differences. Filming can be used and encouraged as a strategy to assess nursing undergraduate students.

The Efficacy of Three Learning Methods Collaborative, Context-Based Learning and Traditional, on Learning, Attitude and Behaviour of Undergraduate Nursing Students: Integrating Theory and Practice.

PubMed

Hasanpour-Dehkordi, Ali; Solati, Kamal

2016-04-01

Communication skills training, responsibility, respect, and self-awareness are important indexes of changing learning behaviours in modern approaches. The aim of this study was to investigate the efficacy of three learning approaches, collaborative, context-based learning (CBL), and traditional, on learning, attitude, and behaviour of undergraduate nursing students. This study was a clinical trial with pretest and post-test of control group. The participants were senior nursing students. The samples were randomly assigned to three groups; CBL, collaborative, and traditional. To gather data a standard questionnaire of students' behaviour and attitude was administered prior to and after the intervention. Also, the rate of learning was investigated by a researcher-developed questionnaire prior to and after the intervention in the three groups. In CBL and collaborative training groups, the mean score of behaviour and attitude increased after the intervention. But no significant association was obtained between the mean scores of behaviour and attitude prior to and after the intervention in the traditional group. However, the mean learning score increased significantly in the CBL, collaborative, and traditional groups after the study in comparison to before the study. Both CBL and collaborative approaches were useful in terms of increased respect, self-awareness, self-evaluation, communication skills and responsibility as well as increased motivation and learning score in comparison to traditional method.

Use of an Anatomical Scalar to Control for Sex-Based Size Differences in Measures of Hyoid Excursion during Swallowing

ERIC Educational Resources Information Center

Molfenter, Sonja M.; Steele, Catriona M.

2014-01-01

Purpose: Traditional methods for measuring hyoid excursion from dynamic videofluoroscopy recordings involve calculating changes in position in absolute units (mm). This method shows a high degree of variability across studies but agreement that greater hyoid excursion occurs inmen than in women. Given that men are typically taller than women, the…

The Effectiveness of the Game-Based Learning System for the Improvement of American Sign Language Using Kinect

ERIC Educational Resources Information Center

Kamnardsiri, Teerawat; Hongsit, Ler-on; Khuwuthyakorn, Pattaraporn; Wongta, Noppon

2017-01-01

This paper investigated students' achievement for learning American Sign Language (ASL), using two different methods. There were two groups of samples. The first experimental group (Group A) was the game-based learning for ASL, using Kinect. The second control learning group (Group B) was the traditional face-to-face learning method, generally…

Blended Learning: A Mixed-Methods Study on Successful Schools and Effective Practices

ERIC Educational Resources Information Center

Mathews, Anne

2017-01-01

Blended learning is a teaching technique that utilizes face-to-face teaching and online or technology-based practice in which the learner has the ability to exert some level of control over the pace, place, path, or time of learning. Schools that employ this method of teaching often demonstrate larger gains than traditional face-to-face programs…

A Study to Determine the Effectiveness of Letter Evaluation as a Learning Device in Business Correspondence Courses.

ERIC Educational Resources Information Center

Baker, William Henry

The purpose of this study was to determine whether a letter-evaluation method would be as effective as the traditional letter-writing method when applied in a college level business correspondence class. One hundred twenty-nine Brigham Young University students were divided into two experimental and two control groups, and categorized according to…

[Application progress on near infrared spectroscopy in quality control and process monitoring of traditional Chinese medicine].

PubMed

Li, Wenlong; Qu, Haibin

2017-01-25

The industry of traditional Chinese medicine (TCM) encounters problems like quality fluctuation of raw materials and unstandardized production process. Near infrared (NIR) spectroscopy technology is widely used in quality control of TCM because of its abundant information, fast and nondestructive characters. The main applications include quantitative analysis of Chinese medicinal materials, intermediates and Chinese patent medicines; the authenticity of TCM, species, origins and manufacturers; monitoring and control of the extraction, alcohol precipitation, column chromatography and blending process. This article reviews the progress on the application of NIR spectroscopy technology in TCM field. In view of the problems existing in the application, the article proposes that the standardization of NIR analysis method should be developed according to specific characteristics of TCM, which will promote the application of NIR technology in the TCM industry.

Filtering method of star control points for geometric correction of remote sensing image based on RANSAC algorithm

NASA Astrophysics Data System (ADS)

Tan, Xiangli; Yang, Jungang; Deng, Xinpu

2018-04-01

In the process of geometric correction of remote sensing image, occasionally, a large number of redundant control points may result in low correction accuracy. In order to solve this problem, a control points filtering algorithm based on RANdom SAmple Consensus (RANSAC) was proposed. The basic idea of the RANSAC algorithm is that using the smallest data set possible to estimate the model parameters and then enlarge this set with consistent data points. In this paper, unlike traditional methods of geometric correction using Ground Control Points (GCPs), the simulation experiments are carried out to correct remote sensing images, which using visible stars as control points. In addition, the accuracy of geometric correction without Star Control Points (SCPs) optimization is also shown. The experimental results show that the SCPs's filtering method based on RANSAC algorithm has a great improvement on the accuracy of remote sensing image correction.

A comparison of two microscale laboratory reporting methods in a secondary chemistry classroom

NASA Astrophysics Data System (ADS)

Martinez, Lance Michael

This study attempted to determine if there was a difference between the laboratory achievement of students who used a modified reporting method and those who used traditional laboratory reporting. The study also determined the relationships between laboratory performance scores and the independent variables score on the Group Assessment of Logical Thinking (GALT) test, chronological age in months, gender, and ethnicity for each of the treatment groups. The study was conducted using 113 high school students who were enrolled in first-year general chemistry classes at Pueblo South High School in Colorado. The research design used was the quasi-experimental Nonequivalent Control Group Design. The statistical treatment consisted of the Multiple Regression Analysis and the Analysis of Covariance. Based on the GALT, students in the two groups were generally in the concrete and transitional stages of the Piagetian cognitive levels. The findings of the study revealed that the traditional and the modified methods of laboratory reporting did not have any effect on the laboratory performance outcome of the subjects. However, the students who used the traditional method of reporting showed a higher laboratory performance score when evaluation was conducted using the New Standards rubric recommended by the state. Multiple Regression Analysis revealed that there was a significant relationship between the criterion variable student laboratory performance outcome of individuals who employed traditional laboratory reporting methods and the composite set of predictor variables. On the contrary, there was no significant relationship between the criterion variable student laboratory performance outcome of individuals who employed modified laboratory reporting methods and the composite set of predictor variables.

Core/shell PLGA microspheres with controllable in vivo release profile via rational core phase design.

PubMed

Yu, Meiling; Yao, Qing; Zhang, Yan; Chen, Huilin; He, Haibing; Zhang, Yu; Yin, Tian; Tang, Xing; Xu, Hui

2018-02-27

Highly soluble drugs tend to release from preparations at high speeds, which make them need to be taken at frequent intervals. Additionally, some drugs need to be controlled to release in vivo at certain periods, so as to achieve therapeutic effects. Thus, the objective of this study is to design injectable microparticulate systems with controllable in vivo release profile. Biodegradable PLGA was used as the matrix material to fabricate microspheres using the traditional double emulsification-solvent evaporation method as well as improved techniques, with gel (5% gelatine or 25% F127) or LP powders as the inner phases. Their physicochemical properties were systemically investigated. Microspheres prepared by modified methods had an increase in drug loading (15.50, 16.72, 15.66%, respectively) and encapsulation efficiencies (73.46, 79.42, 74.40%, respectively) when compared with traditional methods (12.01 and 57.06%). The morphology of the particles was characterized by optical microscope (OM) and scanning electron microscopy (SEM), and the amorphous nature of the encapsulated drug was confirmed by differential scanning calorimetry (DSC) and X-ray diffraction (XRD) analysis. To evaluate their release behaviour, the in vitro degradation, in vitro release and in vivo pharmacodynamics were subsequently studied. Traditional microspheres prepared in this study with water as the inner phase had a relatively short release period within 16 d when compared with modified microspheres with 5% gelatine as the inner phase, which resulted in a smooth release profile and appropriate plasma LP concentrations over 21 d. Thus this type of modified microspheres can be better used in drugs requiring sustained release. The other two formulations containing 25% F127 and LP micropowders presented two-stage release profiles, resulting in fluctuant plasma LP concentrations which may be suitable for drugs requiring controlled release. All the results suggested that drug release rates from the microspheres prepared by various methods were mainly controlled by either the porosity inside the microspheres or the degradation of materials, which could, therefore, lead to different release behaviours. This results indicated great potential of the PLGA microsphere formulation as an injectable depot for controllable in vivo release profile via rational core phase design. Core/shell microspheres fabricated by modified double emulsification-solvent evaporation methods, with various inner phases, to obtain high loading drugs system, as well as appropriate release behaviours. Accordingly, control in vivo release profile via rational core phase design.

[Efficiency of combined methods of hemorroid treatment using hal-rar and laser destruction].

PubMed

Rodoman, G V; Kornev, L V; Shalaeva, T I; Malushenko, R N

2017-01-01

To develop the combined method of treatment of hemorrhoids with arterial ligation under Doppler control and laser destruction of internal and external hemorrhoids. The study included 100 patients with chronic hemorrhoids stage II and III. Combined method of HAL-laser was used in study group, HAL RAR-technique in control group 1 and closed hemorrhoidectomy with linear stapler in control group 2. Сomparative evaluation of results in both groups was performed. Combined method overcomes the drawbacks of traditional surgical treatment and limitations in external components elimination which are inherent for HAL-RAR. Moreover, it has a higher efficiency in treating of hemorrhoids stage II-III compared with HAL-RAR and is equally safe and well tolerable for patients. This method does not increase the risk of recurrence, reduces incidence of complications and time of disability.

Real-time continuous visual biofeedback in the treatment of speech breathing disorders following childhood traumatic brain injury: report of one case.

PubMed

Murdoch, B E; Pitt, G; Theodoros, D G; Ward, E C

1999-01-01

The efficacy of traditional and physiological biofeedback methods for modifying abnormal speech breathing patterns was investigated in a child with persistent dysarthria following severe traumatic brain injury (TBI). An A-B-A-B single-subject experimental research design was utilized to provide the subject with two exclusive periods of therapy for speech breathing, based on traditional therapy techniques and physiological biofeedback methods, respectively. Traditional therapy techniques included establishing optimal posture for speech breathing, explanation of the movement of the respiratory muscles, and a hierarchy of non-speech and speech tasks focusing on establishing an appropriate level of sub-glottal air pressure, and improving the subject's control of inhalation and exhalation. The biofeedback phase of therapy utilized variable inductance plethysmography (or Respitrace) to provide real-time, continuous visual biofeedback of ribcage circumference during breathing. As in traditional therapy, a hierarchy of non-speech and speech tasks were devised to improve the subject's control of his respiratory pattern. Throughout the project, the subject's respiratory support for speech was assessed both instrumentally and perceptually. Instrumental assessment included kinematic and spirometric measures, and perceptual assessment included the Frenchay Dysarthria Assessment, Assessment of Intelligibility of Dysarthric Speech, and analysis of a speech sample. The results of the study demonstrated that real-time continuous visual biofeedback techniques for modifying speech breathing patterns were not only effective, but superior to the traditional therapy techniques for modifying abnormal speech breathing patterns in a child with persistent dysarthria following severe TBI. These results show that physiological biofeedback techniques are potentially useful clinical tools for the remediation of speech breathing impairment in the paediatric dysarthric population.

Automated system for definition of life-cycle resources of electromechanical equipment

NASA Astrophysics Data System (ADS)

Zhukovskiy, Y.; Koteleva, N.

2017-02-01

The frequency of maintenance of electromechanical equipment depends on the plant, which uses and runs this equipment. Very often the maintenance frequency is poorly correlated with the actual state of the electromechanical equipment. Furthermore, traditional methods of diagnosis sometimes cannot work without stopping the process (for example, for equipment located in hard to reach places) and so the maintenance costs are increased. This problem can be solved using the indirect methods of diagnosing of the electromechanical equipment. The indirect methods often use the parameters in the real time and seldom use the parameters of traditional diagnostic methods for determination of the resource of electromechanical equipment. This article is dedicated to developing the structure of a special automated control system. This system must use the big flow of the information about the direct and indirect parameters of the equipment state from plants from different areas of industry and factories which produce the electromechanical equipment.

Encouraging physician appropriate prescribing of non-steroidal anti-inflammatory therapies: protocol of a randomized controlled trial [ISRCTN43532635

PubMed Central

Doupe, Malcolm; Katz, Alan; Kvern, Brent; Manness, Lori-Jean; Metge, Colleen; Thomson, Glen TD; Morrison, Laura; Rother, Kat

2004-01-01

Background Traditional non-steroidal anti-inflammatory drugs (NSAIDs) are a widely used class of therapy in the treatment of chronic pain and inflammation. The drugs are effective and can be relatively inexpensive thanks to available generic versions. Unfortunately the traditional NSAIDs are associated with gastrointestinal complications in a small proportion of patients, requiring costly co-therapy with gastro-protective agents. Recently, a new class of non-steroidal anti-inflammatory agents known as coxibs has become available, fashioned to be safer than the traditional NSAIDs but priced considerably higher than the traditional generics. To help physicians choose appropriately and cost-effectively from the expanded number of anti-inflammatory therapies, scientific bodies have issued clinical practice guidelines and third party payers have published restricted reimbursement policies. The objective of this study is to determine whether an educational intervention can prompt physicians to adjust their prescribing in accordance with these expert recommendations. Methods This is an ongoing, randomized controlled trial. All primary care physicians in Manitoba, Canada have been randomly assigned to a control group or an intervention study group. The educational intervention being evaluated consists of an audit and feedback mechanism combined with optional participation in a Continuing Medical Education interactive workshop. The primary outcome of the study is the change, from pre-to post-intervention, in physicians' appropriate prescribing of non-steroidal anti-inflammatory therapies for patients requiring chronic treatment. Three classes of non-steroidal anti-inflammatory therapies have been identified: coxib therapy, traditional NSAID monotherapy, and traditional NSAID therapy combined with gastro-protective agents. Appropriate prescribing is defined based on international clinical practice guidelines and the provincial drug reimbursement policy in Manitoba. PMID:15327694

Simple CPR: A randomized, controlled trial of video self-instructional cardiopulmonary resuscitation training in an African American church congregation.

PubMed

Todd, K H; Heron, S L; Thompson, M; Dennis, R; O'Connor, J; Kellermann, A L

1999-12-01

Despite the proven efficacy of cardiopulmonary resuscitation (CPR), only a small fraction of the population knows how to perform it. As a result, rates of bystander CPR and rates of survival from cardiac arrest are low. Bystander CPR is particularly uncommon in the African American community. Successful development of a simplified approach to CPR training could boost rates of bystander CPR and save lives. We conducted the following randomized, controlled study to determine whether video self-instruction (VSI) in CPR results in comparable or better performance than traditional CPR training. This randomized, controlled trial was conducted among congregational volunteers in an African American church in Atlanta, GA. Subjects were randomly assigned to receive either 34 minutes of VSI or the 4-hour American Heart Association "Heartsaver" CPR course. Two months after training, blinded observers used explicit criteria to assess CPR performance in a simulated cardiac arrest setting. A recording manikin was used to measure ventilation and chest compression characteristics. Participants also completed a written test of CPR-related knowledge and attitudes. VSI trainees displayed a comparable level of performance to that achieved by traditional trainees. Observers scored 40% of VSI trainees competent or better in performing CPR, compared with only 16% of traditional trainees (absolute difference 24%, 95% confidence interval 8% to 40%). Data from the recording manikin confirmed these observations. VSI trainees and traditional trainees achieved comparable scores on tests of CPR-related knowledge and attitudes. Thirty-four minutes of VSI can produce CPR of comparable quality to that achieved by traditional training methods. VSI provides a simple, quick, consistent, and inexpensive alternative to traditional CPR instruction, and may be used to extend CPR training to historically underserved populations.

Traditional, modern or mixed? Perspectives on social, economic, and health impacts of evolving food retail in Thailand.

PubMed

Kelly, Matthew; Seubsman, Sam-Ang; Banwell, Cathy; Dixon, Jane; Sleigh, Adrian

Transnational food retailers expanded to middle-income countries over recent decades responding to supply (liberalized foreign investment) and demand (rising incomes, urbanization, female workforce participation, and time poverty). Control in new markets diffuses along three axes: socio-economic (rich to poor), geographic (urban to rural), and product category (processed foods to fresh foods). We used a mixed method approach to study the progression of modern retail in Thailand on these three axes and consumer preferences for food retailing. In Thailand modern retail controls half the food sales but traditional fresh markets remain important. Quantitative questionnaires administered to members of a large national cohort study revealed around half of respondents were primarily traditional shoppers and half either utilized modern and traditional formats equally or primarily shopped at supermarkets. Fresh foods were mainly purchased at traditional retail formats and dry packaged foods at supermarkets. Qualitative interviews found price and quality of produce and availability of culturally important products to be significant reasons for continued support of fresh markets. Our results show socio-economic and geographic diffusion is already advanced with most respondents having access to and utilizing modern retail. Control of the fresh food sector by transnationals faces barriers in Thailand and may remain elusive. The short to mid-term outcome may be a bifurcated food system with modern and traditional retail each retaining market share, but fresh markets longer term survival may require government assistance as supermarkets become more established. Fresh markets supply affordable, healthy foods, and livelihoods for poorer Thais and are repositories of Thai food culture and social networks. If they survive they will confer cultural, social, economic, and health benefits.

A randomized controlled trial comparing periodic mask CPAP with physiotherapy after abdominal surgery.

PubMed

Denehy, L; Carroll, S; Ntoumenopoulos, G; Jenkins, S

2001-01-01

Physiotherapists use a variety of techniques aimed at improving lung volumes and secretion clearance in patients after surgery. Periodic continuous positive airway pressure (PCPAP) is used to treat patients following elective upper abdominal surgery. However, the optimal method of application has not been identified, more specifically, the dosage of application of PCPAP. The present randomized controlled trial compared the effects of two dosages of PCPAP application and 'traditional' physiotherapy upon functional residual capacity (FRC), vital capacity (VC), oxyhaemoglobin saturation (SpO2), incidence of post-operative pulmonary complications and length of stay with a control group receiving 'traditional' physiotherapy only. Fifty-seven subjects were randomly allocated to one of three groups. All groups received 'traditional' physiotherapy twice daily for a minimum of three post-operative days. In addition, two groups received PCPAP for 15 or 30 minutes, four times per day, for three days. Fifty subjects (39 male; 11 female) completed the study. There were no significant differences in any variables between the three groups. The overall incidence of post-operative pulmonary complications was 22% in the control group, 11% and 6% in the PCPAP 15-minute and PCPAP 30-minute groups, respectively. Length of hospital stay was not significantly different between the groups but for subjects who developed post-operative pulmonary complications, the length of stay was significantly greater (Z = -2.32; p = 0.021). The addition of PCPAP to a traditional physiotherapy post-operative treatment regimen after upper abdominal surgery did not significantly affect physiological or clinical outcomes.

Design of LPV fault-tolerant controller for pitch system of wind turbine

NASA Astrophysics Data System (ADS)

Wu, Dinghui; Zhang, Xiaolin

2017-07-01

To address failures of wind turbine pitch-angle sensors, traditional wind turbine linear parameter varying (LPV) model is transformed into a double-layer convex polyhedron LPV model. On the basis of this model, when the plurality of the sensor undergoes failure and details of the failure are inconvenient to obtain, each sub-controller is designed using distributed thought and gain scheduling method. The final controller is obtained using all of the sub-controllers by a convex combination. The design method corrects the errors of the linear model, improves the linear degree of the system, and solves the problem of multiple pitch angle faults to ensure stable operation of the wind turbine.

A New Design Method of Automotive Electronic Real-time Control System

NASA Astrophysics Data System (ADS)

Zuo, Wenying; Li, Yinguo; Wang, Fengjuan; Hou, Xiaobo

Structure and functionality of automotive electronic control system is becoming more and more complex. The traditional manual programming development mode to realize automotive electronic control system can't satisfy development needs. So, in order to meet diversity and speedability of development of real-time control system, combining model-based design approach and auto code generation technology, this paper proposed a new design method of automotive electronic control system based on Simulink/RTW. Fristly, design algorithms and build a control system model in Matlab/Simulink. Then generate embedded code automatically by RTW and achieve automotive real-time control system development in OSEK/VDX operating system environment. The new development mode can significantly shorten the development cycle of automotive electronic control system, improve program's portability, reusability and scalability and had certain practical value for the development of real-time control system.

Watershed Management Tool for Selection and Spacial Allocation of Non-Point Source Pollution Control Practices

EPA Science Inventory

Distributed-parameter watershed models are often utilized for evaluating the effectiveness of sediment and nutrient abatement strategies through the traditional {calibrate→ validate→ predict} approach. The applicability of the method is limited due to modeling approximations. In ...

Formulation of an aloe-based product according to Iranian traditional medicine and development of its analysis method.

PubMed

Moein, Elham; Hajimehdipoor, Homa; Toliyat, Tayebeh; Choopani, Rasool; Hamzeloo-Moghadam, Maryam

2017-08-29

Currently, people are more interested to traditional medicine. The traditional formulations should be converted to modern drug delivery systems to be more acceptable for the patients. In the present investigation, a poly herbal medicine "Ayarij-e-Faiqra" (AF) based on Iranian traditional medicine (ITM) has been formulated and its quality control parameters have been developed. The main ingredients of AF including barks of Cinnamomum zeylanicum Blume and Cinnamomum cassia J. Presl, the rhizomes of Nardostachys jatamansi DC., the fruits of Piper cubeba L.f., the flowers of Rosa damascena Herrm., the oleo gum resin of Pistacia terebinthus L. and Aloe spp. dried juice were powdered and used for preparing seven tablet formulations of the herbal mixture. Flowability of the different formulated powders was examined and the best formulations were selected (F6&F7). The tablets were prepared from the selected formulations compared according to the physical characteristics and finally, F7 was selected and coated. Physicochemical characters of core and coated AF tablets were determined and the HPLC method for quantitation of aloin as a marker of tablets was selected and verified according to selectivity, linearity, precision, recovery, LOD and LOQ. The results showed that core and coated AF tablets were in agreement with USP requirements for herbal drugs. They had acceptable appearance, disintegration time, friability, hardness, dissolution behavior, weight variation and content uniformity. The amount of aloin in tablets was found 123.1 mg/tab. The HPLC method for aloin determination in AF tablets was verified according to selectivity, linearity (5-500 μg/ml, r 2 :0.9999), precision (RSD: 1.62%), recovery (108.0%), LOD & LOQ (0.0053 & 0.0161 μg/ml). The formulated tablets could be a good substitute for powder and capsules of AF in ITM clinics with a feasible and precise method for its quality control. Ayarij-e-Faiqra formulation.

H2/H∞ control for grid-feeding converter considering system uncertainty

NASA Astrophysics Data System (ADS)

Li, Zhongwen; Zang, Chuanzhi; Zeng, Peng; Yu, Haibin; Li, Shuhui; Fu, Xingang

2017-05-01

Three-phase grid-feeding converters are key components to integrate distributed generation and renewable power sources to the power utility. Conventionally, proportional integral and proportional resonant-based control strategies are applied to control the output power or current of a GFC. But, those control strategies have poor transient performance and are not robust against uncertainties and volatilities in the system. This paper proposes a H2/H∞-based control strategy, which can mitigate the above restrictions. The uncertainty and disturbance are included to formulate the GFC system state-space model, making it more accurate to reflect the practical system conditions. The paper uses a convex optimisation method to design the H2/H∞-based optimal controller. Instead of using a guess-and-check method, the paper uses particle swarm optimisation to search a H2/H∞ optimal controller. Several case studies implemented by both simulation and experiment can verify the superiority of the proposed control strategy than the traditional PI control methods especially under dynamic and variable system conditions.

Implantation of a new enteral stent in obstructive colorectal cancer using interventional radiology in patients over 70 years of age.

PubMed

Miłek, Tomasz; Ciostek, Piotr

2015-07-01

Colorectal cancer is the second leading cause of death due to cancer in Poland. The traditional approach to treat patients included a surgical procedure. Irrespective of the surgical method being used, surgical treatment of malignant colorectal obstruction is associated with prolonged hospitalisation, and the postoperative mortality rate is approximately 5-11%. Due to these problems, more interest has been shown in less invasive methods. Prosthesis implantation is a leading endoscopic method used currently in palliative or preoperative treatment. To compare the results of implantation of traditional stents with the results of implantation of an own stent using minimally invasive methods. Left-sided colon obstruction due to cancer was an indication for transplantation. All patients were aged over 70 years and had serious concomitant diseases. The control group included 50 patients with colorectal cancer who received traditional stents in the period 2009-2011. Our stent covers only the internal length of a tumour. It is not equipped with anti-migration flares. To minimize the risk of migration it has a system of hooks that are responsible for permanent anchorage of the stent within the tumour mass. Implantation technical and clinical success defined as effective decompression of intestinal obstruction was 100% in both groups. There were 2 cases of stent migration in the control group. It is possible to achieve a secure surgical anastomosis after intestinal decompression. Stent implantation is fast and safe thanks to the positioning system that was used. The use of labelled hooks is a secure anti-migration solution.

Systemic Synthesis Questions [SSynQs] as Tools to Help Students to Build Their Cognitive Structures in a Systemic Manner

NASA Astrophysics Data System (ADS)

Hrin, Tamara N.; Fahmy, Ameen F. M.; Segedinac, Mirjana D.; Milenković, Dušica D.

2016-08-01

Many studies dedicated to the teaching and learning of organic chemistry courses have emphasized that high school students have shown significant difficulties in mastering the concepts of this discipline. Therefore, the aim of our study was to help students to overcome these difficulties by applying systemic synthesis questions, [SSynQs], as the instructional method in our intervention. This work shows that students from the group exposed to the new teaching method achieved higher scores on final testing than students from the control group, who were taught by the traditional method, when students' achievements in conventional, linear questions [LQs] and in [SSynQs] were studied. These results were followed by observation of lower levels of mental effort by students from the intervention group, and higher levels of mental effort in the control group, invested during solving both types of questions. This correlation between achievement and mental effort resulted in high instructional efficiency for the applied method in the intervention group, [SSynQs], and low instructional efficiency for the traditional teaching and learning method applied in the control group. A systemic triangular relation between achievement, mental effort, and instructional efficiency, established by each group and gender, emphasized that the application of [SSynQs] was more suited to female students than for male students because of [SSynQs] characteristics as teaching and learning tools and because of learning style and ability differences between genders.

Improved motor control method with measurements of fiber optics gyro (FOG) for dual-axis rotational inertial navigation system (RINS).

PubMed

Song, Tianxiao; Wang, Xueyun; Liang, Wenwei; Xing, Li

2018-05-14

Benefiting from frame structure, RINS can improve the navigation accuracy by modulating the inertial sensor errors with proper rotation scheme. In the traditional motor control method, the measurements of the photoelectric encoder are always adopted to drive inertial measurement unit (IMU) to rotate. However, when carrier conducts heading motion, the inertial sensor errors may no longer be zero-mean in navigation coordinate. Meanwhile, some high-speed carriers like aircraft need to roll a certain angle to balance the centrifugal force during the heading motion, which may result in non-negligible coupling errors, caused by the FOG installation errors and scale factor errors. Moreover, the error parameters of FOG are susceptible to the temperature and magnetic field, and the pre-calibration is a time-consuming process which is difficult to completely suppress the FOG-related errors. In this paper, an improved motor control method with the measurements of FOG is proposed to address these problems, with which the outer frame can insulate the carrier's roll motion and the inner frame can simultaneously achieve the rotary modulation on the basis of insulating the heading motion. The results of turntable experiments indicate that the navigation performance of dual-axis RINS has been significantly improved over the traditional method, which could still be maintained even with large FOG installation errors and scale factor errors, proving that the proposed method can relax the requirements for the accuracy of FOG-related errors.

The method of quality marker research and quality evaluation of traditional Chinese medicine based on drug properties and effect characteristics.

PubMed

Zhang, Tiejun; Bai, Gang; Han, Yanqi; Xu, Jun; Gong, Suxiao; Li, Yazhuo; Zhang, Hongbing; Liu, Changxiao

2018-05-15

Quality of traditional Chinese medicine (TCM) plays a critical role in industry of TCM. Rapid development of TCM pharmaceutical areas is, however, greatly limited, since there are many issues not been resolved, concerning the quality study of TCM. Core concept of TCM quality as well as the characteristics of TCM was discussed, in order to guide the quality research and evaluation of TCM, further improve the level of TCM quality control. In this review, on the basis of systematic analysis of fundamental property and features of TCM in clinical application, the approaches and methods of quality marker (Q-marker) study were proposed through combination of transitivity and traceability of essentials of quality, correlation between chemical ingredients and drug property/efficacy, as well as analysis of endemicity of ingredients sharing similar pharmacophylogenetic and biosynthetic approaches. The approaches and methods of Q-marker study were proposed and the novel integrated pattern for quality assessment and control of TCM was established. The core concept of Q-marker has helped to break through the bottleneck of the current fragmented quality research of TCM and improved the scientificity, integrity and systematicness of quality control. Copyright © 2018 Elsevier GmbH. All rights reserved.

Research of vibration controlling based on programmable logic controller for electrostatic precipitator

NASA Astrophysics Data System (ADS)

Zhang, Zisheng; Li, Yanhu; Li, Jiaojiao; Liu, Zhiqiang; Li, Qing

2013-03-01

In order to improve the reliability, stability and automation of electrostatic precipitator, circuits of vibration motor for ESP and vibration control ladder diagram program are investigated using Schneider PLC with high performance and programming software of Twidosoft. Operational results show that after adopting PLC, vibration motor can run automatically; compared with traditional control system of vibration based on single-chip microcomputer, it has higher reliability, better stability and higher dust removal rate, when dust emission concentrations <= 50 mg m-3, providing a new method for vibration controlling of ESP.

Correcting for batch effects in case-control microbiome studies

PubMed Central

Gibbons, Sean M.; Duvallet, Claire

2018-01-01

High-throughput data generation platforms, like mass-spectrometry, microarrays, and second-generation sequencing are susceptible to batch effects due to run-to-run variation in reagents, equipment, protocols, or personnel. Currently, batch correction methods are not commonly applied to microbiome sequencing datasets. In this paper, we compare different batch-correction methods applied to microbiome case-control studies. We introduce a model-free normalization procedure where features (i.e. bacterial taxa) in case samples are converted to percentiles of the equivalent features in control samples within a study prior to pooling data across studies. We look at how this percentile-normalization method compares to traditional meta-analysis methods for combining independent p-values and to limma and ComBat, widely used batch-correction models developed for RNA microarray data. Overall, we show that percentile-normalization is a simple, non-parametric approach for correcting batch effects and improving sensitivity in case-control meta-analyses. PMID:29684016

System training and assessment in simultaneous proportional myoelectric prosthesis control

PubMed Central

2014-01-01

Background Pattern recognition control of prosthetic hands take inputs from one or more myoelectric sensors and controls one or more degrees of freedom. However, most systems created allow only sequential control of one motion class at a time. Additionally, only recently have researchers demonstrated proportional myoelectric control in such systems, an option that is believed to make fine control easier for the user. Recent developments suggest improved reliability if the user follows a so-called prosthesis guided training (PGT) scheme. Methods In this study, a system for simultaneous proportional myoelectric control has been developed for a hand prosthesis with two motor functions (hand open/close, and wrist pro-/supination). The prosthesis has been used with a prosthesis socket equivalent designed for normally-limbed subjects. An extended version of PGT was developed for use with proportional control. The control system’s performance was tested for two subjects in the Clothespin Relocation Task and the Southampton Hand Assessment Procedure (SHAP). Simultaneous proportional control was compared with three other control strategies implemented on the same prosthesis: mutex proportional control (the same system but with simultaneous control disabled), mutex on-off control, and a more traditional, sequential proportional control system with co-contractions for state switching. Results The practical tests indicate that the simultaneous proportional control strategy and the two mutex-based pattern recognition strategies performed equally well, and superiorly to the more traditional sequential strategy according to the chosen outcome measures. Conclusions This is the first simultaneous proportional myoelectric control system demonstrated on a prosthesis affixed to the forearm of a subject. The study illustrates that PGT is a promising system training method for proportional control. Due to the limited number of subjects in this study, no definite conclusions can be drawn. PMID:24775602

Application of capability indices and control charts in the analytical method control strategy.

PubMed

Oliva, Alexis; Llabres Martinez, Matías

2017-08-01

In this study, we assessed the usefulness of control charts in combination with the process capability indices, C pm and C pk , in the control strategy of an analytical method. The traditional X-chart and moving range chart were used to monitor the analytical method over a 2-year period. The results confirmed that the analytical method is in-control and stable. Different criteria were used to establish the specifications limits (i.e. analyst requirements) for fixed method performance (i.e. method requirements). If the specification limits and control limits are equal in breadth, the method can be considered "capable" (C pm  = 1), but it does not satisfy the minimum method capability requirements proposed by Pearn and Shu (2003). Similar results were obtained using the C pk index. The method capability was also assessed as a function of method performance for fixed analyst requirements. The results indicate that the method does not meet the requirements of the analytical target approach. A real-example data of a SEC with light-scattering detection method was used as a model whereas previously published data were used to illustrate the applicability of the proposed approach. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Evaluation Measures and Methods: Some Intersections.

ERIC Educational Resources Information Center

Elliott, John

The literature is reviewed for four combinations of evaluation measures and methods: traditional methods with traditional measures (T-Meth/T-Mea), nontraditional methods with traditional measures (N-Meth/T-Mea), traditional measures with nontraditional measures (T-Meth/N-Mea), and nontraditional methods with nontraditional measures (N-Meth/N-Mea).…

Simple method for quantifying microbiologically assisted chloramine decay in drinking water.

PubMed

Sathasivan, Arumugam; Fisher, Ian; Kastl, George

2005-07-15

In a chloraminated drinking water distribution system, monochloramine decays due to chemical and microbiological reactions. For modeling and operational control purposes, it is necessary to know the relative contribution of each type of reaction, but there was no method to quantify these contributions separately. A simple method was developed to do so. It compares monochloramine decay rates of processed (0.2 microm filtered or microbiologically inhibited by adding 100 microg of silver/L as silver nitrate) and unprocessed samples under controlled temperature conditions. The term microbial decay factor (Fm) was defined and derived from this method, to characterize the relative contribution of microbiologically assisted monochloramine decay to the total monochloramine decay observed in bulk water. Fm is the ratio between microbiologically assisted monochloramine decay and chemical decay of a given water sample measured at 20 degrees C. One possible use of the method is illustrated, where a service reservoir's bulk and inlet waters were sampled twice and analyzed for both the traditional indicators and the microbial decay factor. The microbial decay factor values alone indicated that more microbiologically assisted monochloramine decay was occurring in one bulk water than the other. In contrast, traditional nitrification indicators failed to show any difference. Further analysis showed that the microbial decay factor is more sensitive and that it alone can provide an early warning.

High correlations between MRI brain volume measurements based on NeuroQuant® and FreeSurfer.

PubMed

Ross, David E; Ochs, Alfred L; Tate, David F; Tokac, Umit; Seabaugh, John; Abildskov, Tracy J; Bigler, Erin D

2018-05-30

NeuroQuant ® (NQ) and FreeSurfer (FS) are commonly used computer-automated programs for measuring MRI brain volume. Previously they were reported to have high intermethod reliabilities but often large intermethod effect size differences. We hypothesized that linear transformations could be used to reduce the large effect sizes. This study was an extension of our previously reported study. We performed NQ and FS brain volume measurements on 60 subjects (including normal controls, patients with traumatic brain injury, and patients with Alzheimer's disease). We used two statistical approaches in parallel to develop methods for transforming FS volumes into NQ volumes: traditional linear regression, and Bayesian linear regression. For both methods, we used regression analyses to develop linear transformations of the FS volumes to make them more similar to the NQ volumes. The FS-to-NQ transformations based on traditional linear regression resulted in effect sizes which were small to moderate. The transformations based on Bayesian linear regression resulted in all effect sizes being trivially small. To our knowledge, this is the first report describing a method for transforming FS to NQ data so as to achieve high reliability and low effect size differences. Machine learning methods like Bayesian regression may be more useful than traditional methods. Copyright © 2018 Elsevier B.V. All rights reserved.

Optimization technique for rolled edge control process based on the acentric tool influence functions.

PubMed

Du, Hang; Song, Ci; Li, Shengyi; Xu, Mingjin; Peng, Xiaoqiang

2017-05-20

In the process of computer controlled optical surfacing (CCOS), the uncontrollable rolled edge restricts further improvements of the machining accuracy and efficiency. Two reasons are responsible for the rolled edge problem during small tool polishing. One is that the edge areas cannot be processed because of the orbit movement. The other is that changing the tool influence function (TIF) is difficult to compensate for in algorithms, since pressure step appears in the local pressure distribution at the surface edge. In this paper, an acentric tool influence function (A-TIF) is designed to remove the rolled edge after CCOS polishing. The model of A-TIF is analyzed theoretically, and a control point translation dwell time algorithm is used to verify that the full aperture of the workpiece can be covered by the peak removal point of the tool influence functions. Thus, surface residual error in the full aperture can be effectively corrected. Finally, the experiments are carried out. Two fused silica glass samples of 100  mm×100  mm are polished by traditional CCOS and the A-TIF method, respectively. The rolled edge was clearly produced in the sample polished by the traditional CCOS, while residual errors do not show this problem the sample polished by the A-TIF method. Therefore, the rolled edge caused by the traditional CCOS process is successfully suppressed during the A-TIF process. The ability to suppress the rolled edge of the designed A-TIF has been confirmed.

Game-based learning as a vehicle to teach first aid content: a randomized experiment.

PubMed

Charlier, Nathalie; De Fraine, Bieke

2013-07-01

Knowledge of first aid (FA), which constitutes lifesaving treatments for injuries or illnesses, is important for every individual. In this study, we have set up a group-randomized controlled trial to assess the effectiveness of a board game for learning FA. Four class groups (120 students) were randomly assigned to 2 conditions, a board game or a traditional lecture method (control condition). The effect of the learning environment on students' achievement was examined through a paper-and-pencil test of FA knowledge. Two months after the intervention, the participants took a retention test and completed a questionnaire assessing enjoyment, interest, and motivation. An analysis of pre- and post-test knowledge scores showed that both conditions produced significant increases in knowledge. The lecture was significantly more effective in increasing knowledge, as compared to the board game. Participants indicated that they liked the game condition more than their fellow participants in the traditional lecture condition. These results suggest that traditional lectures are more effective in increasing student knowledge, whereas educational games are more effective for student enjoyment. From this case study we recommend alteration or a combination of these teaching methods to make learning both effective and enjoyable. © 2013, American School Health Association.

A new diode laser acupuncture therapy apparatus

NASA Astrophysics Data System (ADS)

Li, Chengwei; Huang, Zhen; Li, Dongyu; Zhang, Xiaoyuan

2006-06-01

Since the first laser-needles acupuncture apparatus was introduced in therapy, this kind of apparatus has been well used in laser biomedicine as its non-invasive, pain- free, non-bacterium, and safetool. The laser acupuncture apparatus in this paper is based on single-chip microcomputer and associated by semiconductor laser technology. The function like traditional moxibustion including reinforcing and reducing is implemented by applying chaos method to control the duty cycle of moxibustion signal, and the traditional lifting and thrusting of acupuncture is implemented by changing power output of the diode laser. The radiator element of diode laser is made and the drive circuit is designed. And chaos mathematic model is used to produce deterministic class stochastic signal to avoid the body adaptability. This function covers the shortages of continuous irradiation or that of simple disciplinary stimulate signal, which is controlled by some simple electronic circuit and become easily adjusted by human body. The realization of reinforcing and reducing of moxibustion is technological innovation in traditional acupuncture coming true in engineering.

MFAHP: A novel method on the performance evaluation of the industrial wireless networked control system

NASA Astrophysics Data System (ADS)

Wu, Linqin; Xu, Sheng; Jiang, Dezhi

2015-12-01

Industrial wireless networked control system has been widely used, and how to evaluate the performance of the wireless network is of great significance. In this paper, considering the shortcoming of the existing performance evaluation methods, a comprehensive performance evaluation method of networks multi-indexes fuzzy analytic hierarchy process (MFAHP) combined with the fuzzy mathematics and the traditional analytic hierarchy process (AHP) is presented. The method can overcome that the performance evaluation is not comprehensive and subjective. Experiments show that the method can reflect the network performance of real condition. It has direct guiding role on protocol selection, network cabling, and node setting, and can meet the requirements of different occasions by modifying the underlying parameters.

Keeping Campuses Safe.

ERIC Educational Resources Information Center

Kennedy, Mike

1999-01-01

Describes how colleges and universities are using technology, as well as traditional methods, to keep campuses safe and reduce crime. Topics include using free pizza in a successful contest to teach students about campus safety, installing security cameras, using access-control cards, providing adequate lighting, and creating a bicycle patrol…

Simulation in an Undergraduate Nursing Pharmacology Course: A Pilot Study.

PubMed

Tinnon, Elizabeth; Newton, Rebecca

This study examined the effectiveness of simulation as a method of teaching pharmacological concepts to nursing students; perceptions of satisfaction with simulation as a teaching strategy were also evaluated. Second-semester juniors participated in three simulations and completed the National League for Nursing Student Satisfaction and Self-Confidence in Learning Questionnaire and the Student Evaluation of Educational Quality Survey; a control group received traditional lectures. A unit exam on anticoagulant therapy content was administered to measure effectiveness. Findings support that simulation is as effective as traditional lecture for an undergraduate pharmacology course.

Liposomal bupivacaine versus traditional bupivacaine for pain control after total hip arthroplasty

PubMed Central

Ma, Ting-Ting; Wang, Yu-Hui; Jiang, Yun-Feng; Peng, Cong-Bin; Yan, Chao; Liu, Zi-Gui; Xu, Wei-Xing

2017-01-01

Abstract Background: In the past, the efficacy of local infiltration of liposomal bupivacaine for total hip arthroplasty (THA) patients was in debate. Therefore, this meta-analysis was conducted to determine whether local infiltration of liposomal bupivacaine provides better pain relief after THA. Methods: We searched Web of Science, PubMed, Embase, and the Cochrane Library databases to the April 2017. Any studies comparing liposomal bupivacaine and traditional bupivacaine were included in our meta-analysis. The outcomes included visual analog scale (VAS) at 24, 48, and 72 hours, total morphine consumption at 24 hours, and the length of hospital stay. We assessed the pooled data using a random-effect model. Results: Six studies were finally included in this meta-analysis. Our pooled data analysis demonstrated that liposomal bupivacaine was more effective than the traditional bupivacaine in terms of VAS at 24 hours (P  =  .018) and the length of hospital stay (P  =  .000). There was no significant difference in terms of the VAS at 48 and 72 hours and total morphine consumption at 24 hours (P >.05). Conclusion: Compared with the traditional bupivacaine, liposomal bupivacaine shows better pain control at 24 hours and reduces the length of hospital stay after THA. Its economic costs must be assessed in multimodal center randomized controlled trials when being recommended as a long-acting alternative analgesic agent for a THA patient. PMID:28640101

Factors influencing contraceptive use and non-use among women of advanced reproductive age in Nigeria.

PubMed

Solanke, Bola Lukman

2017-01-07

Factors influencing contraceptive use and non-use among women of advanced reproductive age have been insufficiently researched in Nigeria. This study examines factors influencing contraceptive use and non-use among women of advanced reproductive age in Nigeria. Secondary data were pooled and extracted from 2008 and 2013 Nigeria Demographic and Health Surveys (NDHS). The weighted sample size was 14,450 women of advanced reproductive age. The dependent variable was current contraceptive use. The explanatory variables were selected socio-demographic characteristics and three control variables. Analyses were performed using Stata version 12. Multinomial logistic regression was applied in four models. Majority of the respondents are not using any method of contraceptive; the expected risk of using modern contraceptive relative to traditional method reduces by a factor of 0.676 for multiparous women (rrr = 0.676; CI: 0.464-0.985); the expected risk of using modern contraceptive relative to traditional method reduces by a factor of 0.611 for women who want more children (rrr = 0.611; CI: 0.493-0.757); the relative risk for using modern contraceptive relative to traditional method increases by a factor of 1.637 as maternal education reaches secondary education (rrr = 1.637; CI: 1.173-2.285); the relative risk for using modern contraceptive relative to traditional method increases by a factor of 1.726 for women in richest households (rrr = 1.726; CI: 1.038-2.871); and the expected risk of using modern contraceptive relative to traditional method increases by a factor of 1.250 for southern women (rrr = 1.250; CI: 1.200-1.818). Socio-demographic characteristics exert more influence on non-use than modern contraceptive use. The scope, content and coverage of existing BCC messages should be extended to cover the contraceptive needs and challenges of women of advanced reproductive age in the country.

Putting the person back into psychopathology: an intervention to reduce mental illness stigma in the classroom.

PubMed

Mann, Caroline E; Himelein, Melissa J

2008-07-01

This research aims to compare the effectiveness of two methods of teaching psychopathology in reducing stigma toward mental illness. Based on previous stigma research, a first-person, narrative approach was contrasted with traditional, diagnosis-centered education. STUDY 1 Participants consisted of 53 undergraduates at a small, public university enrolled in two introductory psychology classes. During six hours of class time focused on psychopathology, one class received the experimental pedagogy while the other served as a control, receiving traditional instruction. Stigma was assessed pre- and post-intervention using a social distance scale and vignette design. Statistical analyses compared means and change scores between the two classes. STUDY 1 Students in the experimental classroom showed a significant decrease in stigma following the intervention, whereas those in the control group showed no change. STUDY 2 A follow-up study was conducted to replicate the promising effects demonstrated in Study 1. Two additional classrooms (n = 48) were both exposed to the first-person, narrative pedagogy, and their stigma monitored pre- and post- intervention. STUDY 2 Students reported a significant decrease in stigma following the intervention. Together, these studies suggest that traditional methods of teaching psychopathology do not lessen mental illness stigma, a serious concern that can potentially be reconciled by incorporating more person-centered instructional methods. Results are discussed in terms of their implications for the way psychopathology is taught throughout the mental health field, as well as the practical application of stigma interventions woven into the curriculum.

Movement decoupling control for two-axis fast steering mirror

NASA Astrophysics Data System (ADS)

Wang, Rui; Qiao, Yongming; Lv, Tao

2017-02-01

Based on flexure hinge and piezoelectric actuator of two-axis fast steering mirror is a complex system with time varying, uncertain and strong coupling. It is extremely difficult to achieve high precision decoupling control with the traditional PID control method. The feedback error learning method was established an inverse hysteresis model which was based inner product dynamic neural network nonlinear and no-smooth for piezo-ceramic. In order to improve the actuator high precision, a method was proposed, which was based piezo-ceramic inverse model of two dynamic neural network adaptive control. The experiment result indicated that, compared with two neural network adaptive movement decoupling control algorithm, static relative error is reduced from 4.44% to 0.30% and coupling degree is reduced from 12.71% to 0.60%, while dynamic relative error is reduced from 13.92% to 2.85% and coupling degree is reduced from 2.63% to 1.17%.

Systematic Review and Meta-Analysis of the Clinical Efficacy and Adverse Effects of Chinese Herbal Decoction for the Treatment of Gout

PubMed Central

Liu, Xiaoyu; Chen, Pinyi; Liu, Ling; Zhang, Yanqi; Wu, Yazhou; Pettigrew, Julia Christine; Cheng, Dixiang; Yi, Dong

2014-01-01

Background In East Asia, numerous reports describe the utilization of traditional Chinese herbal decoctions to treat gout. However, the reported clinical effects vary. Objectives In this study, we reviewed and analyzed a large number of randomized controlled clinical trials to systematically assess the clinical efficacy and adverse reactions of Chinese herbal decoctions for treating gout. Methods We performed a comprehensive search of databases, such as PubMed, EMBASE, the Cochrane Central Register of Controlled Trials, Chinese biomedical literature database, et al. In addition, we manually searched the relevant meeting information in the library of the Third Military Medical University. Results Finally, 17 randomized controlled trials with a sample size of 1,402 cases met the criteria and were included in the study. The results of the meta-analysis showed that when gout had progressed to the stage of acute arthritis, there was no significant difference in clinical efficacy between Chinese herbal decoctions and traditional Western medicine, as indicated based on the following parameters: serum uric acid (standardized mean difference (SMD):0.35, 95% confidence interval (CI): 0.03 to 0.67), C reactive protein (SMD: 0.25, 95% CI: −0.18 to 0.69), erythrocyte sedimentation rate (SMD: 0.21, 95% CI: −0.02 to 0.45) and overall clinical response (relative risk (RR): 1.05, 95% CI: 1.01 to 1.10). However, the Chinese herbal decoction was significantly better than traditional Western medicine in controlling adverse drug reactions (RR: 0.06, 95% CI: 0.03 to 0.13). Conclusions Through a systematic review of the clinical efficacy and safety of Chinese herbal decoctions and traditional Western medicine for the treatment of gout, we found that Chinese herbal decoction and traditional Western medicine led to similar clinical efficacy, but the Chinese herbal decoctions were superior to Western medicine in terms of controlling adverse drug reactions. PMID:24465466

The Application of Auto-Disturbance Rejection Control Optimized by Least Squares Support Vector Machines Method and Time-Frequency Representation in Voltage Source Converter-High Voltage Direct Current System.

PubMed

Liu, Ying-Pei; Liang, Hai-Ping; Gao, Zhong-Ke

2015-01-01

In order to improve the performance of voltage source converter-high voltage direct current (VSC-HVDC) system, we propose an improved auto-disturbance rejection control (ADRC) method based on least squares support vector machines (LSSVM) in the rectifier side. Firstly, we deduce the high frequency transient mathematical model of VSC-HVDC system. Then we investigate the ADRC and LSSVM principles. We ignore the tracking differentiator in the ADRC controller aiming to improve the system dynamic response speed. On this basis, we derive the mathematical model of ADRC controller optimized by LSSVM for direct current voltage loop. Finally we carry out simulations to verify the feasibility and effectiveness of our proposed control method. In addition, we employ the time-frequency representation methods, i.e., Wigner-Ville distribution (WVD) and adaptive optimal kernel (AOK) time-frequency representation, to demonstrate our proposed method performs better than the traditional method from the perspective of energy distribution in time and frequency plane.

The Application of Auto-Disturbance Rejection Control Optimized by Least Squares Support Vector Machines Method and Time-Frequency Representation in Voltage Source Converter-High Voltage Direct Current System

PubMed Central

Gao, Zhong-Ke

2015-01-01

In order to improve the performance of voltage source converter-high voltage direct current (VSC-HVDC) system, we propose an improved auto-disturbance rejection control (ADRC) method based on least squares support vector machines (LSSVM) in the rectifier side. Firstly, we deduce the high frequency transient mathematical model of VSC-HVDC system. Then we investigate the ADRC and LSSVM principles. We ignore the tracking differentiator in the ADRC controller aiming to improve the system dynamic response speed. On this basis, we derive the mathematical model of ADRC controller optimized by LSSVM for direct current voltage loop. Finally we carry out simulations to verify the feasibility and effectiveness of our proposed control method. In addition, we employ the time-frequency representation methods, i.e., Wigner-Ville distribution (WVD) and adaptive optimal kernel (AOK) time-frequency representation, to demonstrate our proposed method performs better than the traditional method from the perspective of energy distribution in time and frequency plane. PMID:26098556

Research on tactical information display technology for interactive virtual cockpit

NASA Astrophysics Data System (ADS)

Sun, Zhongyun; Tian, Tao; Su, Feng

2018-04-01

Based on a fact that traditional tactical information display technology suffers from disadvantages of a large number of data to be transferred and low plotting efficiency in an interactive virtual cockpit, a GID protocol-based simulation has been designed. This method dissolves complex tactical information screens into basic plotting units. The indication of plotting units is controlled via the plotting commands, which solves the incompatibility between the tactical information display in traditional simulation and the desktop-based virtual simulation training system. Having been used in desktop systems for helicopters, fighters, and transporters, this method proves to be scientific and reasonable in design and simple and efficient in usage, which exerts a significant value in establishing aviation equipment technology support training products.

[Dynamic magnetotherapy use in comprehensive treatment phlegmons of maxillofacial region and mandible fractures].

PubMed

Lepilin, A V; Raĭgorodckiĭ, Iu M; Nozdrachev, V G; Erokina, N L

2007-01-01

145 patients (60 with phlegmons of submandibular and submental regions, 85--with fractures of mandible) were observed and treated with the use of moving pulse magnetic field (MPMF) produced by special apparatus (AMO-ATOS-E, , Saratov-city), 60 patients with the same pathology were treated by traditional physical methods and served as control. Use of MPMF led to quicker patient recovery: quicker reduction (if compared with traditional physical methods of treatment) of oedema and soft tissue inflammatory infiltration, quicker relief from inflammatory reaction (according to data of cytokinin profile), improvement of tissue blood supply in the region of fractures in patients with mandible fractures. As the result--we had shortening treatment terms of such patients and complication number reduction.

Effect of simulation on the ability of first year nursing students to learn vital signs.

PubMed

Eyikara, Evrim; Baykara, Zehra Göçmen

2018-01-01

The acquisition of cognitive, affective and psychomotor knowledge and skills are required in nursing, made possible via an interactive teaching method, such as simulation. This study conducted to identify the impact of simulation on first-year nursing students' ability to learn vital signs. A convenience sample of 90 first-year nursing students enrolled at a University, Ankara, in 2014-2015. Ninety students enrolled for lessons on the "Fundamentals of Nursing" were identified using a simple random sampling method. The students were taught vital signs theory via traditional methods. They were grouped into experimental 1, experimental 2 and control group, of 30 students each. Students in the experimental 1 group attended sessions on simulation and those in the experimental 2 group sessions on laboratory work, followed by simulation. The control group were taught via traditional methods and only attended the laboratory work sessions. The students' cognitive knowledge acquisition was evaluated using a knowledge test before and after the lessons. The ability to measure vital signs in adults (healthy ones and patients) was evaluated using a skill control list. A statistically significant difference was not observed between the groups in terms of the average pre-test scores on knowledge (p>0.050). Groups exposed to simulation obtained statistically significantly higher scores than the control group in post-test knowledge (p<0.050). The ability of the groups exposed to simulation to measure vital signs in healthy adults and patients was more successful than that the control group (p<0.050). This was statistically significant. Simulation had a positive effect on the ability of nursing students to measure vital signs. Thus, simulation should be included in the mainstream curriculum in order to effectively impart nursing knowledge and skills. Copyright © 2017 Elsevier Ltd. All rights reserved.

A Statistical Project Control Tool for Engineering Managers

NASA Technical Reports Server (NTRS)

Bauch, Garland T.

2001-01-01

This slide presentation reviews the use of a Statistical Project Control Tool (SPCT) for managing engineering projects. A literature review pointed to a definition of project success, (i.e., A project is successful when the cost, schedule, technical performance, and quality satisfy the customer.) The literature review also pointed to project success factors, and traditional project control tools, and performance measures that are detailed in the report. The essential problem is that with resources becoming more limited, and an increasing number or projects, project failure is increasing, there is a limitation of existing methods and systematic methods are required. The objective of the work is to provide a new statistical project control tool for project managers. Graphs using the SPCT method plotting results of 3 successful projects and 3 failed projects are reviewed, with success and failure being defined by the owner.

UAV path planning using artificial potential field method updated by optimal control theory

NASA Astrophysics Data System (ADS)

Chen, Yong-bo; Luo, Guan-chen; Mei, Yue-song; Yu, Jian-qiao; Su, Xiao-long

2016-04-01

The unmanned aerial vehicle (UAV) path planning problem is an important assignment in the UAV mission planning. Based on the artificial potential field (APF) UAV path planning method, it is reconstructed into the constrained optimisation problem by introducing an additional control force. The constrained optimisation problem is translated into the unconstrained optimisation problem with the help of slack variables in this paper. The functional optimisation method is applied to reform this problem into an optimal control problem. The whole transformation process is deduced in detail, based on a discrete UAV dynamic model. Then, the path planning problem is solved with the help of the optimal control method. The path following process based on the six degrees of freedom simulation model of the quadrotor helicopters is introduced to verify the practicability of this method. Finally, the simulation results show that the improved method is more effective in planning path. In the planning space, the length of the calculated path is shorter and smoother than that using traditional APF method. In addition, the improved method can solve the dead point problem effectively.

CPG-inspired workspace trajectory generation and adaptive locomotion control for quadruped robots.

PubMed

Liu, Chengju; Chen, Qijun; Wang, Danwei

2011-06-01

This paper deals with the locomotion control of quadruped robots inspired by the biological concept of central pattern generator (CPG). A control architecture is proposed with a 3-D workspace trajectory generator and a motion engine. The workspace trajectory generator generates adaptive workspace trajectories based on CPGs, and the motion engine realizes joint motion imputes. The proposed architecture is able to generate adaptive workspace trajectories online by tuning the parameters of the CPG network to adapt to various terrains. With feedback information, a quadruped robot can walk through various terrains with adaptive joint control signals. A quadruped platform AIBO is used to validate the proposed locomotion control system. The experimental results confirm the effectiveness of the proposed control architecture. A comparison by experiments shows the superiority of the proposed method against the traditional CPG-joint-space control method.

Monitoring scale scores over time via quality control charts, model-based approaches, and time series techniques.

PubMed

Lee, Yi-Hsuan; von Davier, Alina A

2013-07-01

Maintaining a stable score scale over time is critical for all standardized educational assessments. Traditional quality control tools and approaches for assessing scale drift either require special equating designs, or may be too time-consuming to be considered on a regular basis with an operational test that has a short time window between an administration and its score reporting. Thus, the traditional methods are not sufficient to catch unusual testing outcomes in a timely manner. This paper presents a new approach for score monitoring and assessment of scale drift. It involves quality control charts, model-based approaches, and time series techniques to accommodate the following needs of monitoring scale scores: continuous monitoring, adjustment of customary variations, identification of abrupt shifts, and assessment of autocorrelation. Performance of the methodologies is evaluated using manipulated data based on real responses from 71 administrations of a large-scale high-stakes language assessment.

Analogue mouse pointer control via an online steady state visual evoked potential (SSVEP) brain-computer interface

NASA Astrophysics Data System (ADS)

Wilson, John J.; Palaniappan, Ramaswamy

2011-04-01

The steady state visual evoked protocol has recently become a popular paradigm in brain-computer interface (BCI) applications. Typically (regardless of function) these applications offer the user a binary selection of targets that perform correspondingly discrete actions. Such discrete control systems are appropriate for applications that are inherently isolated in nature, such as selecting numbers from a keypad to be dialled or letters from an alphabet to be spelled. However motivation exists for users to employ proportional control methods in intrinsically analogue tasks such as the movement of a mouse pointer. This paper introduces an online BCI in which control of a mouse pointer is directly proportional to a user's intent. Performance is measured over a series of pointer movement tasks and compared to the traditional discrete output approach. Analogue control allowed subjects to move the pointer faster to the cued target location compared to discrete output but suffers more undesired movements overall. Best performance is achieved when combining the threshold to movement of traditional discrete techniques with the range of movement offered by proportional control.

Sound reproduction in personal audio systems using the least-squares approach with acoustic contrast control constraint.

PubMed

Cai, Yefeng; Wu, Ming; Yang, Jun

2014-02-01

This paper describes a method for focusing the reproduced sound in the bright zone without disturbing other people in the dark zone in personal audio systems. The proposed method combines the least-squares and acoustic contrast criteria. A constrained parameter is introduced to tune the balance between two performance indices, namely, the acoustic contrast and the spatial average error. An efficient implementation of this method using convex optimization is presented. Offline simulations and real-time experiments using a linear loudspeaker array are conducted to evaluate the performance of the presented method. Results show that compared with the traditional acoustic contrast control method, the proposed method can improve the flatness of response in the bright zone by sacrificing the level of acoustic contrast.

Apparatus and method for generating swirling flow

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haden, Robert E.; Lorentz, Donald G.

An apparatus and method for generating a swirl is disclosed that is used to induce an axi-symmetric swirling flow to an incoming flow. The disclosed subject matter induces a uniform and axi-symmetric swirl, circumferentially around a discharge location, thus imparting a more accurate, repeatable, continuous, and controllable swirl and mixing condition of interest. Moreover, the disclosed subject matter performs the swirl injection at a lower pressure drop in comparison to a more traditional methods and devices.

Natural energy and vernacular architecture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fathy, H.

1986-01-01

This volume presents insights into the indigenous architectural forms in hot arid climates. The author presents his extensive research on climate control, particularly in the Middle East, to demonstrate the advantages of many locally available building materials and traditional building methods. He suggests improved uses of natural energy that can bridge the gap between traditional achievements and modern needs. He argues that various architectural forms in these climates have evolved intuitively from scientifically valid concepts. Such forms combine comfort and beauty, social and physical functionality. He discusses that in substituting modern materials, architects sometimes have ignored the environmental context ofmore » traditional architecture. As a result, individuals may find themselves physically and psychologically uncomfortable in modern structures. His approach, informed by a sensitive humanism, demonstrates the ways in which traditional architectural forms can be of use in solving problems facing contemporary architecture, in particular the critical housing situation in the Third World.« less

MO-FG-202-03: Efficient Data Collection of Continuous 2D and Discrete Relative Dosimetric Data for Annual LINAC QA Using TrueBeam Developer Mode and a 1D Scanning Tank

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knutson, N; Schmidt, M; University of Rhode Island, Kingston, RI

2016-06-15

Purpose: To develop a method to exploit real-time dynamic machine and couch parameter control during linear accelerator (LINAC) beam delivery to facilitate efficient performance of TG-142 suggested, Annual LINAC QA tests. Methods: Varian’s TrueBeam Developer Mode (Varian Medical Systems, Palo Alto, CA) facilitates control of Varian’s TrueBeam LINAC via instructions provided in Extensible Markup Language (XML) files. This allows machine and couch parameters to be varied dynamically, in real-time, during beam delivery. Custom XML files were created to allow for the collection of (1) continuous Tissue Maximum Ratios (TMRs), (2) beam profiles, and (3) continuous output factors using a 1D-scanningmore » tank. TMRs were acquired by orienting an ionization chamber (IC) at isocenter (depth=25cm) and synchronizing a depth scan towards the water surface while lowering the couch at 1mm/s. For beam profiles, the couch was driven laterally and longitudinally while logging IC electrometer readings. Output factors (OFs) where collected by continually varying field sizes (4×4 to 30×30-cm{sup 2}) at a constant speed of 6.66 mm/s. To validate measurements, comparisons were made to data collected using traditional methods (e.g. 1D or 3D tank). Results: All data collecting using the proposed methods agreed with traditionally collected data (TMRs within 1%, OFs within 0.5% and beam profile agreement within 1% / 1mm) while taking less time to collect (factor of approximately 1/10) and with a finer sample resolution. Conclusion: TrueBeam developer mode facilitates collection of continuous data with the same accuracy as traditionally collected data with a finer resolution in less time. Results demonstrate an order of magnitude increase in sampled resolution and an order of magnitude reduction in collection time compared to traditional acquisition methods (e.g. 3D scanning tank). We are currently extending this approach to perform other TG-142 tasks.« less

Using geophysical images of a watershed subsurface to predict soil textural properties

USDA-ARS?s Scientific Manuscript database

Subsurface architecture, in particular changes in soil type across the landscape, is an important control on the hydrological and ecological function of a watershed. Traditional methods of mapping soils involving subjective assignment of soil boundaries are inadequate for studies requiring a quantit...

Classroom Control: Some Cybernetic Comments on the Possible and the Impossible.

ERIC Educational Resources Information Center

Robinson, Michael

1979-01-01

Application of cybernetic laws and information processing principles suggests that traditional and modern teaching methods are radically incompatible, in the sense that techniques developed in the one cannot be transferred to the other without dislocation of the system as a whole. (Author/WBC)

Controlling Tensegrity Robots through Evolution using Friction based Actuation

NASA Technical Reports Server (NTRS)

Kothapalli, Tejasvi; Agogino, Adrian K.

2017-01-01

Traditional robotic structures have limitations in planetary exploration as their rigid structural joints are prone to damage in new and rough terrains. In contrast, robots based on tensegrity structures, composed of rods and tensile cables, offer a highly robust, lightweight, and energy efficient solution over traditional robots. In addition tensegrity robots can be highly configurable by rearranging their topology of rods, cables and motors. However, these highly configurable tensegrity robots pose a significant challenge for locomotion due to their complexity. This study investigates a control pattern for successful locomotion in tensegrity robots through an evolutionary algorithm. A twelve-rod hardware model is rapidly prototyped to utilize a new actuation method based on friction. A web-based physics simulation is created to model the twelve-rod tensegrity ball structure. Square-waves are used as control policies for the actuators of the tensegrity structure. Monte Carlo trials are run to find the most successful number of amplitudes for the square-wave control policy. From the results, an evolutionary algorithm is implemented to find the most optimized solution for locomotion of the twelve-rod tensegrity structure. The software pattern coupled with the new friction based actuation method can serve as the basis for highly efficient tensegrity robots in space exploration.

[Active surveillance of adverse drug reaction in the era of big data: challenge and opportunity for control selection].

PubMed

Wang, S F; Zhan, S Y

2016-07-01

Electronic healthcare databases have become an important source for active surveillance of drug safety in the era of big data. The traditional epidemiology research designs are needed to confirm the association between drug use and adverse events based on these datasets, and the selection of the comparative control is essential to each design. This article aims to explain the principle and application of each type of control selection, introduce the methods and parameters for method comparison, and describe the latest achievements in the batch processing of control selection, which would provide important methodological reference for the use of electronic healthcare databases to conduct post-marketing drug safety surveillance in China.

Predictors of diarrheal mortality and patterns of caregiver health seeking behavior in in Karachi, Pakistan

PubMed Central

Qamar, Farah Naz; Zaman, Umber; Quadri, Farheen; Khan, Asia; Shaikh, Babar Tasneem; Azam, Iqbal; Nasrin, Dilruba; Kotloff, Karen; Levine, Myron; Brown, Nick; Zaidi, Anita K M

2016-01-01

Background Pakistan is unfortunately among the five countries that contributed to the most deaths due to diarrhea and pneumonia in 2010. To explore factors associated with diarrheal deaths we assessed care–seeking behavior and other predictors of diarrhea–related mortality in children in selected low–income peri–urban communities of Karachi, Pakistan. Methods A mixed methods study (qualitative and quantitative) using matched case–control design and focus group discussions with parents of children with moderate to severe diarrhea (MSD) was undertaken. Cases were children  <5 years of age who died within 60 days of developing an episode of MSD. Controls were age–matched children who survived after 60 days of an episode of MSD. Demographic, clinical, and care–related behavioral predictors of mortality were assessed. Conditional logistic regression was performed, matched adjusted odds ratios (mOR) are reported. Results Parents of 77 cases and 154 controls were interviewed. Cases were less likely to receive appropriate care compared to controls (mOR = 0.2, 95% confidence interval (CI) 0.05–0.91). Refusal for hospital admission (OR = 8.9, 95% CI 2.6–30.8), and delays in reaching the health facility (OR = 3.6, 95% CI 1.0–12.9) were significant independent predictors of mortality. We found strong beliefs in traditional and spiritual healing in the population; use of both modern and traditional/spiritual treatments concurrently was common. Conclusion Appropriate care seeking behavior predicts survival in children with diarrhea in Pakistan. There is a complex belief system relating to traditional and standard therapies. Health education for appropriate health care seeking should be implemented in order to achieve a substantial decline in diarrheal disease mortality in Pakistan. PMID:27606059

Breast Cancer and Modifiable Lifestyle Factors in Argentinean Women: Addressing Missing Data in a Case-Control Study

PubMed Central

Coquet, Julia Becaria; Tumas, Natalia; Osella, Alberto Ruben; Tanzi, Matteo; Franco, Isabella; Diaz, Maria Del Pilar

2016-01-01

A number of studies have evidenced the effect of modifiable lifestyle factors such as diet, breastfeeding and nutritional status on breast cancer risk. However, none have addressed the missing data problem in nutritional epidemiologic research in South America. Missing data is a frequent problem in breast cancer studies and epidemiological settings in general. Estimates of effect obtained from these studies may be biased, if no appropriate method for handling missing data is applied. We performed Multiple Imputation for missing values on covariates in a breast cancer case-control study of Córdoba (Argentina) to optimize risk estimates. Data was obtained from a breast cancer case control study from 2008 to 2015 (318 cases, 526 controls). Complete case analysis and multiple imputation using chained equations were the methods applied to estimate the effects of a Traditional dietary pattern and other recognized factors associated with breast cancer. Physical activity and socioeconomic status were imputed. Logistic regression models were performed. When complete case analysis was performed only 31% of women were considered. Although a positive association of Traditional dietary pattern and breast cancer was observed from both approaches (complete case analysis OR=1.3, 95%CI=1.0-1.7; multiple imputation OR=1.4, 95%CI=1.2-1.7), effects of other covariates, like BMI and breastfeeding, were only identified when multiple imputation was considered. A Traditional dietary pattern, BMI and breastfeeding are associated with the occurrence of breast cancer in this Argentinean population when multiple imputation is appropriately performed. Multiple Imputation is suggested in Latin America’s epidemiologic studies to optimize effect estimates in the future. PMID:27892664

Methodologies for Root Locus and Loop Shaping Control Design with Comparisons

NASA Technical Reports Server (NTRS)

Kopasakis, George

2017-01-01

This paper describes some basics for the root locus controls design method as well as for loop shaping, and establishes approaches to expedite the application of these two design methodologies to easily obtain control designs that meet requirements with superior performance. The two design approaches are compared for their ability to meet control design specifications and for ease of application using control design examples. These approaches are also compared with traditional Proportional Integral Derivative (PID) control in order to demonstrate the limitations of PID control. Robustness of these designs is covered as it pertains to these control methodologies and for the example problems.

Development of Static Balance Measurement and Correction Compound Platform for Single Blade of Controllable Pitch Propeller

NASA Astrophysics Data System (ADS)

Chao, Zhang; Shijie, Su; Yilin, Yang; Guofu, Wang; Chao, Wang

2017-11-01

Aiming at the static balance of the controllable pitch propeller (CPP), a high efficiency static balance method based on the double-layer structure of the measuring table and gantry robot is adopted to realize the integration of torque measurement and corrected polish for controllable pitch propeller blade. The control system was developed by Microsoft Visual Studio 2015, and a composite platform prototype was developed. Through this prototype, conduct an experiment on the complete process of torque measurement and corrected polish based on a 300kg class controllable pitch propeller blade. The results show that the composite platform can correct the static balance of blade with a correct, efficient and labor-saving operation, and can replace the traditional method on static balance of the blade.

Multidimensional optimal droop control for wind resources in DC microgrids

NASA Astrophysics Data System (ADS)

Bunker, Kaitlyn J.

Two important and upcoming technologies, microgrids and electricity generation from wind resources, are increasingly being combined. Various control strategies can be implemented, and droop control provides a simple option without requiring communication between microgrid components. Eliminating the single source of potential failure around the communication system is especially important in remote, islanded microgrids, which are considered in this work. However, traditional droop control does not allow the microgrid to utilize much of the power available from the wind. This dissertation presents a novel droop control strategy, which implements a droop surface in higher dimension than the traditional strategy. The droop control relationship then depends on two variables: the dc microgrid bus voltage, and the wind speed at the current time. An approach for optimizing this droop control surface in order to meet a given objective, for example utilizing all of the power available from a wind resource, is proposed and demonstrated. Various cases are used to test the proposed optimal high dimension droop control method, and demonstrate its function. First, the use of linear multidimensional droop control without optimization is demonstrated through simulation. Next, an optimal high dimension droop control surface is implemented with a simple dc microgrid containing two sources and one load. Various cases for changing load and wind speed are investigated using simulation and hardware-in-the-loop techniques. Optimal multidimensional droop control is demonstrated with a wind resource in a full dc microgrid example, containing an energy storage device as well as multiple sources and loads. Finally, the optimal high dimension droop control method is applied with a solar resource, and using a load model developed for a military patrol base application. The operation of the proposed control is again investigated using simulation and hardware-in-the-loop techniques.

Traditional and non-traditional treatments for autism spectrum disorder with seizures: an on-line survey.

PubMed

Frye, Richard E; Sreenivasula, Swapna; Adams, James B

2011-05-18

Despite the high prevalence of seizure, epilepsy and abnormal electroencephalograms in individuals with autism spectrum disorder (ASD), there is little information regarding the relative effectiveness of treatments for seizures in the ASD population. In order to determine the effectiveness of traditional and non-traditional treatments for improving seizures and influencing other clinical factor relevant to ASD, we developed a comprehensive on-line seizure survey. Announcements (by email and websites) by ASD support groups asked parents of children with ASD to complete the on-line surveys. Survey responders choose one of two surveys to complete: a survey about treatments for individuals with ASD and clinical or subclinical seizures or abnormal electroencephalograms, or a control survey for individuals with ASD without clinical or subclinical seizures or abnormal electroencephalograms. Survey responders rated the perceived effect of traditional antiepileptic drug (AED), non-AED seizure treatments and non-traditional ASD treatments on seizures and other clinical factors (sleep, communication, behavior, attention and mood), and listed up to three treatment side effects. Responses were obtained concerning 733 children with seizures and 290 controls. In general, AEDs were perceived to improve seizures but worsened other clinical factors for children with clinical seizure. Valproic acid, lamotrigine, levetiracetam and ethosuximide were perceived to improve seizures the most and worsen other clinical factors the least out of all AEDs in children with clinical seizures. Traditional non-AED seizure and non-traditional treatments, as a group, were perceived to improve other clinical factors and seizures but the perceived improvement in seizures was significantly less than that reported for AEDs. Certain traditional non-AED treatments, particularly the ketogenic diet, were perceived to improve both seizures and other clinical factors.For ASD individuals with reported subclinical seizures, other clinical factors were reported to be worsened by AEDs and improved by non-AED traditional seizure and non-traditional treatments. The rate of side effects was reportedly higher for AEDs compared to traditional non-AED treatments. Although this survey-based method only provides information regarding parental perceptions of effectiveness, this information may be helpful for selecting seizure treatments in individuals with ASD.

Prevalence of Malaria and Anemia among Pregnant Women Attending a Traditional Birth Home in Benin City, Nigeria

PubMed Central

Oladeinde, Bankole Henry; Omoregie, Richard; Odia, Ikponmwosa; Oladeinde, Oladapo Babatunde

2012-01-01

Objectives To determine the prevalence of malaria and anemia among pregnant women attending a traditional birth center as well as the effect of herbal remedies, gravidity, age, educational background and malaria prevention methods on their prevalence. Methods Blood specimens were collected from 119 pregnant women attending a Traditional Birth Home in Benin City, Nigeria. Malaria parasitemia was diagnosed by microscopy while anemia was defined as hemoglobin concentration <11 g/dL. Results The prevalence of malaria infection was (OR=4.35 95% CI=1.213, 15.600; p=0.016) higher among primigravidae (92.1%). Pregnant women (38.5%) with tertiary level of education had significantly lower prevalence of malaria infection (p=0.002). Malaria significantly affected the prevalence of anemia (p<0.05). Anemia was associated with consumption of herbal remedies (OR=2.973; 95% CI=1.206, 7.330; p=0.017). The prevalence of malaria parasitemia and anemia were not affected by malaria prevention methods used by the participants. Conclusion The overall prevalence of malaria infection and anemia observed in this study were 78.9% and 46.2%, respectively. Higher prevalence of malaria infection was associated with primigravidae and lower prevalence with tertiary education of subjects. Anemia was associated with consumption of herbal remedies. There is urgent need to control the prevalence of malaria and anemia among pregnant women attending traditional birth homes. PMID:22811774

Teacher content knowledge in the context of science education reform

NASA Astrophysics Data System (ADS)

Doby, Janice Kay

1997-12-01

The decline of science education in elementary schools has been well documented. While numerous efforts have been made for the purpose of reforming science education, most of those efforts have targeted science programs, assessment techniques, and setting national, state, and local standards, stressing teacher accountability for meeting those standards. However, inadequate science content knowledge of preservice teachers limits their ability to master effective teaching strategies, and also may foster negative attitudes toward science and science teaching. It is, therefore, highly unlikely that any significant reform in science education will be realized until this major underlying problem is addressed and resolved. The purpose of this study was to examine the effects of an experimental elementary science methods course, which employs the use of laser videodisc technology and instructional implications from cognitive science and instructional design, in terms of preservice teacher gains in Earth and physical science content knowledge and locus of control in science. The experimental elementary science methods course was compared to a more traditional approach to the same course which focused primarily on methods of teaching in the physical sciences and other science domains. The experimental and traditional groups were compared before and after treatment in terms of preservice teachers' content knowledge in Earth and physical science and locus ofcontrol in science. Results indicated that the experimental and traditional groups were comparable prior to treatment. The experimental group (89 preservice teachers) responded correctly to 45% of the items on the Elementary Science Concepts Test (ESCT) pretest and the traditional group (78 preservice teachers) responded correctly to 42% of the pretest items, the difference between groups being nonsignificant. Further, the experimental and traditional groups scored similarly on the pre-assessment of locus of control in science with scores on the Preservice Teacher Information and Science Opinion Questionnaire (ISOQ) of 162.12 and 163.65, respectively, the difference also being nonsignificant. The pre- and post-administrations of both the ESCT and ISOQ were all found to be statistically significant (F (4, 162) = 271.18343, p<0.05) in predicting group membership. Analyses of variance indicated significantly greater gains in Earth and physical science content knowledge (F (1,165) = 743.7746, p<0.025) and locus of control in science (F (1,165) = 45.7477, p<0.025) for the experimental group compared to the traditional group. A significant difference (F = (2,162) = 31.82279, p<0.05) was found between the combined effect of locus of control in science and Earth and physical science content knowledge in respect to treatment, indicating that the curriculum and instructional design of the experimental course significantly influenced preservice teachers' science content knowledge and locus of control in science. Suggestions for further research included: (a) determining whether the results of this present research may also apply to inservice teachers, (b) determining the effects of such preservice and inservice training on actual classroom practice, (c) relating increased science knowledge with improvement in science lesson planning and mastery of pedagogical skills, and (d) more detailed analysis of instructional implications from cognitive science and instructional design in regard to their application to the teaching of science (as well as other content areas).

Development of similarity theory for control systems

NASA Astrophysics Data System (ADS)

Myshlyaev, L. P.; Evtushenko, V. F.; Ivushkin, K. A.; Makarov, G. V.

2018-05-01

The area of effective application of the traditional similarity theory and the need necessity of its development for systems are discussed. The main statements underlying the similarity theory of control systems are given. The conditions for the similarity of control systems and the need for similarity control control are formulated. Methods and algorithms for estimating and similarity control of control systems and the results of research of control systems based on their similarity are presented. The similarity control of systems includes the current evaluation of the degree of similarity of control systems and the development of actions controlling similarity, and the corresponding targeted change in the state of any element of control systems.

Concurrent myotomy and tunneling after establishment of a half tunnel instead of myotomy after establishment of a full tunnel: a more efficient method of peroral endoscopic myotomy.

PubMed

Philips, George M; Dacha, Sunil; Keilin, Steve A; Willingham, Field F; Cai, Qiang

2016-04-01

Peroral endoscopic myotomy (POEM) is a time-consuming and challenging procedure. Traditionally, the myotomy is done after the submucosal tunnel has been completed. Starting the myotomy earlier, after submucosal tunneling is half completed (concurrent myotomy and tunneling), may be more efficient. This study aims to assess if the method of concurrent myotomy and tunneling may decrease the procedural time and be efficacious. This is a retrospective case series of patients who underwent modified POEM (concurrent myotomy and tunneling) or traditional POEM at a tertiary care medical center. Modified POEM or traditional POEM was performed at the discretion of the endoscopist in patients presenting with achalasia. The total procedural duration, myotomy duration, myotomy length, and time per unit length of myotomy were recorded for both modified and traditional POEM. Modified POEM was performed in 6 patients whose mean age (± standard deviation [SD]) was 58 ± 13.3 years. Of these, 5 patients had type II achalasia and 1 patient had esophageal dysmotility. The mean Eckardt score (± SD) before the procedure was 8.8 ± 1.3. The modified technique was performed in 47 ± 8 minutes, with 6 ± 1 minutes required per centimeter of myotomy and 3 ± 1 minutes required per centimeter of submucosal space. The Eckardt score was 3 ± 1.1 at 1 month and 3 ± 2.5 at 3 months. The procedure time for modified POEM was significantly shorter than that for traditional POEM. Modified POEM with short submucosal tunneling may be more efficient than traditional POEM with long submucosal tunneling, and outcomes may be equivalent over short-term follow-up. Long-term data and randomized controlled studies are needed to compare the clinical efficacy of modified POEM with that of the traditional method.

Design and implementation of a general main axis controller for the ESO telescopes

NASA Astrophysics Data System (ADS)

Sandrock, Stefan; Di Lieto, Nicola; Pettazzi, Lorenzo; Erm, Toomas

2012-09-01

Most of the real-time control systems at the existing ESO telescopes were developed with "traditional" methods, using general purpose VMEbus electronics, and running applications that were coded by hand, mostly using the C programming language under VxWorks. As we are moving towards more modern design methods, we have explored a model-based design approach for real-time applications in the telescope area, and used the control algorithm of a standard telescope main axis as a first example. We wanted to have a clear work-flow that follows the "correct-by-construction" paradigm, where the implementation is testable in simulation on the development host, and where the testing time spent by debugging on target is minimized. It should respect the domains of control, electronics, and software engineers in the choice of tools. It should be a targetindependent approach so that the result could be deployed on various platforms. We have selected the Mathworks tools Simulink, Stateflow, and Embedded Coder for design and implementation, and LabVIEW with NI hardware for hardware-in-the-loop testing, all of which are widely used in industry. We describe how these tools have been used in order to model, simulate, and test the application. We also evaluate the benefits of this approach compared to the traditional method with respect to testing effort and maintainability. For a specific axis controller application we have successfully integrated the result into the legacy platform of the existing VLT software, as well as demonstrated how to use the same design for a new development with a completely different environment.

Concurrent myotomy and tunneling after establishment of a half tunnel instead of myotomy after establishment of a full tunnel: a more efficient method of peroral endoscopic myotomy

PubMed Central

Philips, George M.; Dacha, Sunil; Keilin, Steve A.; Willingham, Field F.; Cai, Qiang

2016-01-01

Background and study aims: Peroral endoscopic myotomy (POEM) is a time-consuming and challenging procedure. Traditionally, the myotomy is done after the submucosal tunnel has been completed. Starting the myotomy earlier, after submucosal tunneling is half completed (concurrent myotomy and tunneling), may be more efficient. This study aims to assess if the method of concurrent myotomy and tunneling may decrease the procedural time and be efficacious. Patients and methods: This is a retrospective case series of patients who underwent modified POEM (concurrent myotomy and tunneling) or traditional POEM at a tertiary care medical center. Modified POEM or traditional POEM was performed at the discretion of the endoscopist in patients presenting with achalasia. The total procedural duration, myotomy duration, myotomy length, and time per unit length of myotomy were recorded for both modified and traditional POEM. Results: Modified POEM was performed in 6 patients whose mean age (± standard deviation [SD]) was 58 ± 13.3 years. Of these, 5 patients had type II achalasia and 1 patient had esophageal dysmotility. The mean Eckardt score (± SD) before the procedure was 8.8 ± 1.3. The modified technique was performed in 47 ± 8 minutes, with 6 ± 1 minutes required per centimeter of myotomy and 3 ± 1 minutes required per centimeter of submucosal space. The Eckardt score was 3 ± 1.1 at 1 month and 3 ± 2.5 at 3 months. The procedure time for modified POEM was significantly shorter than that for traditional POEM. Conclusions: Modified POEM with short submucosal tunneling may be more efficient than traditional POEM with long submucosal tunneling, and outcomes may be equivalent over short-term follow-up. Long-term data and randomized controlled studies are needed to compare the clinical efficacy of modified POEM with that of the traditional method. PMID:27092318

Comparison of answer-until-correct and full-credit assessments in a team-based learning course.

PubMed

Farland, Michelle Z; Barlow, Patrick B; Levi Lancaster, T; Franks, Andrea S

2015-03-25

To assess the impact of awarding partial credit to team assessments on team performance and on quality of team interactions using an answer-until-correct method compared to traditional methods of grading (multiple-choice, full-credit). Subjects were students from 3 different offerings of an ambulatory care elective course, taught using team-based learning. The control group (full-credit) consisted of those enrolled in the course when traditional methods of assessment were used (2 course offerings). The intervention group consisted of those enrolled in the course when answer-until-correct method was used for team assessments (1 course offering). Study outcomes included student performance on individual and team readiness assurance tests (iRATs and tRATs), individual and team final examinations, and student assessment of quality of team interactions using the Team Performance Scale. Eighty-four students enrolled in the courses were included in the analysis (full-credit, n=54; answer-until-correct, n=30). Students who used traditional methods of assessment performed better on iRATs (full-credit mean 88.7 (5.9), answer-until-correct mean 82.8 (10.7), p<0.001). Students who used answer-until-correct method of assessment performed better on the team final examination (full-credit mean 45.8 (1.5), answer-until-correct 47.8 (1.4), p<0.001). There was no significant difference in performance on tRATs and the individual final examination. Students who used the answer-until-correct method had higher quality of team interaction ratings (full-credit 97.1 (9.1), answer-until-correct 103.0 (7.8), p=0.004). Answer-until-correct assessment method compared to traditional, full-credit methods resulted in significantly lower scores for iRATs, similar scores on tRATs and individual final examinations, improved scores on team final examinations, and improved perceptions of the quality of team interactions.

Terminal Sliding Mode Tracking Controller Design for Automatic Guided Vehicle

NASA Astrophysics Data System (ADS)

Chen, Hongbin

2018-03-01

Based on sliding mode variable structure control theory, the path tracking problem of automatic guided vehicle is studied, proposed a controller design method based on the terminal sliding mode. First of all, through analyzing the characteristics of the automatic guided vehicle movement, the kinematics model is presented. Then to improve the traditional expression of terminal sliding mode, design a nonlinear sliding mode which the convergence speed is faster than the former, verified by theoretical analysis, the design of sliding mode is steady and fast convergence in the limited time. Finally combining Lyapunov method to design the tracking control law of automatic guided vehicle, the controller can make the automatic guided vehicle track the desired trajectory in the global sense as well as in finite time. The simulation results verify the correctness and effectiveness of the control law.

The efficacy of a continuous quality improvement (CQI) method in a radiological department. Comparison with non-CQI control material.

PubMed

Laurila, J; Standertskjöld-Nordenstam, C G; Suramo, I; Tolppanen, E M; Tervonen, O; Korhola, O; Brommels, M

2001-01-01

To study the efficacy of continuous quality improvement (CQI) compared to ordinary management in an on-duty radiology department. Because of complaints regarding delivery of on-duty radiological services, an improvement was initiated simultaneously at two hospitals, at the HUCH (Helsinki University Central Hospital) utilising the CQI-method, and at the OUH (Oulu University Hospital) with a traditional management process. For the CQI project, a team was formed to evaluate the process with flow-charts, cause and effect diagrams, Pareto analysis and control charts. Interventions to improve the process were based on the results of these analyses. The team at the HUCH implemented the following changes: A radiologist was added to the evening shift between 15:00-22:00 and a radiographer was moved from the morning shift to 15:00-22:00. A clear improvement was achieved in the turn-around time, but in the follow-up some of the gains were lost. Only minimal changes were achieved at the OUH, where the intervention was based on traditional management processes. CQI was an effective method for improving the quality of performance of a radiology department compared with ordinary management methods, but some of this improvement may be subsequently lost without a continuous measurement system.

A comparison of two methods of teaching. Computer managed instruction and keypad questions versus traditional classroom lecture.

PubMed

Halloran, L

1995-01-01

Computers increasingly are being integrated into nursing education. One method of integration is through computer managed instruction (CMI). Recently, technology has become available that allows the integration of keypad questions into CMI. This brings a new type of interactivity between students and teachers into the classroom. The purpose of this study was to evaluate differences in achievement between a control group taught by traditional classroom lecture (TCL) and an experimental group taught using CMI and keypad questions. Both control and experimental groups consisted of convenience samples of junior nursing students in a baccalaureate program taking a medical/surgical nursing course. Achievement was measured by three instructor-developed multiple choice examinations. Findings demonstrated that although the experimental group demonstrated increasingly higher test scores as the semester progressed, no statistical difference was found in achievement between the two groups. One reason for this may be phenomenon of vampire video. Initially, the method of presentation overshadowed the content. As students became desensitized to the method, they were able to focus and absorb more content. This study suggests that CMI and keypads are a viable teaching option for nursing education. It is equal to TCL in student achievement and provides a new level of interaction in the classroom setting.

The Technology of Suppressing Harmonics with Complex Neural Network is Applied to Microgrid

NASA Astrophysics Data System (ADS)

Zhang, Jing; Li, Zhan-Ying; Wang, Yan-ping; Li, Yang; Zong, Ke-yong

2018-03-01

According to the traits of harmonics in microgrid, a new CANN controller which combines BP and RBF neural network is proposed to control APF to detect and suppress harmonics. This controller has the function of current prediction. By simulation in Matlab / Simulink, this design can shorten the delay time nearly 0.02s (a power supply current cycle) in comparison with the traditional controller based on ip-iq method. The new controller also has higher compensation accuracy and better dynamic tracking traits, it can greatly suppress the harmonics and improve the power quality.

A fast and accurate frequency estimation algorithm for sinusoidal signal with harmonic components

NASA Astrophysics Data System (ADS)

Hu, Jinghua; Pan, Mengchun; Zeng, Zhidun; Hu, Jiafei; Chen, Dixiang; Tian, Wugang; Zhao, Jianqiang; Du, Qingfa

2016-10-01

Frequency estimation is a fundamental problem in many applications, such as traditional vibration measurement, power system supervision, and microelectromechanical system sensors control. In this paper, a fast and accurate frequency estimation algorithm is proposed to deal with low efficiency problem in traditional methods. The proposed algorithm consists of coarse and fine frequency estimation steps, and we demonstrate that it is more efficient than conventional searching methods to achieve coarse frequency estimation (location peak of FFT amplitude) by applying modified zero-crossing technique. Thus, the proposed estimation algorithm requires less hardware and software sources and can achieve even higher efficiency when the experimental data increase. Experimental results with modulated magnetic signal show that the root mean square error of frequency estimation is below 0.032 Hz with the proposed algorithm, which has lower computational complexity and better global performance than conventional frequency estimation methods.

Outcome modelling strategies in epidemiology: traditional methods and basic alternatives

PubMed Central

Greenland, Sander; Daniel, Rhian; Pearce, Neil

2016-01-01

Abstract Controlling for too many potential confounders can lead to or aggravate problems of data sparsity or multicollinearity, particularly when the number of covariates is large in relation to the study size. As a result, methods to reduce the number of modelled covariates are often deployed. We review several traditional modelling strategies, including stepwise regression and the ‘change-in-estimate’ (CIE) approach to deciding which potential confounders to include in an outcome-regression model for estimating effects of a targeted exposure. We discuss their shortcomings, and then provide some basic alternatives and refinements that do not require special macros or programming. Throughout, we assume the main goal is to derive the most accurate effect estimates obtainable from the data and commercial software. Allowing that most users must stay within standard software packages, this goal can be roughly approximated using basic methods to assess, and thereby minimize, mean squared error (MSE). PMID:27097747

High-Performance Polyimide Powder Coatings

NASA Technical Reports Server (NTRS)

2008-01-01

Much of the infrastructure at Kennedy Space Center and other NASA sites has been subjected to outside weathering effects for more than 40 years. Because much of this infrastructure has metallic surfaces, considerable effort is continually devoted to developing methods to minimize the effects of corrosion on these surfaces. These efforts are especially intense at KSC, where offshore salt spray and exhaust from Solid Rocket Boosters accelerate corrosion. Coatings of various types have traditionally been the choice for minimizing corrosion, and improved corrosion control methods are constantly being researched. Recent work at KSC on developing an improved method for repairing Kapton (polyimide)-based electrical wire insulation has identified polyimides with much lower melting points than traditional polyimides used for insulation. These lower melting points and the many other outstanding physical properties of polyimides (thermal stability, chemical resistance, and electrical properties) led us to investigate whether they could be used in powder coatings.

Evaluation of Performance and Perceptions of Electronic vs. Paper Multiple-Choice Exams

ERIC Educational Resources Information Center

Washburn, Shannon; Herman, James; Stewart, Randolph

2017-01-01

In the veterinary professional curriculum, methods of examination in many courses are transitioning from the traditional paper-based exams to electronic-based exams. Therefore, a controlled trial to evaluate the impact of testing methodology on examination performance in a veterinary physiology course was designed and implemented. Formalized…

Determining Students' Attitude towards Physics through Problem-Solving Strategy

ERIC Educational Resources Information Center

Erdemir, Naki

2009-01-01

In this study, the effects of teacher-directed and self-directed problem-solving strategies on students' attitudes toward physics were explored. Problem-solving strategies were used with the experimental group, while the control group was instructed using traditional teaching methods. The study was conducted with 270 students at various high…

Informative priors on fetal fraction increase power of the noninvasive prenatal screen

USDA-ARS?s Scientific Manuscript database

Noninvasive prenatal screening (NIPS) sequences a mixture of the maternal and fetal cell-free DNA. Fetal trisomy can be detected by examining chromosomal dosages estimated from sequencing reads. The traditional method uses the Z-test, which compares a subject against a set of euploid controls, where...

Interteaching and Lecture: A Comparison of Long-Term Recognition Memory

ERIC Educational Resources Information Center

Saville, Bryan K.; Bureau, Alex; Eckenrode, Claire; Fullerton, Alison; Herbert, Reanna; Maley, Michelle; Porter, Allen; Zombakis, Julie

2014-01-01

Although a number of studies suggest that interteaching is an effective alternative to traditional teaching methods, no studies have systematically examined whether interteaching improves long-term memory. In this study, we assigned students to different teaching conditions--interteaching, lecture, or control--and then gave them a multiple-choice…

Conducting Randomized Controlled Trials with Offenders in an Administrative Setting

ERIC Educational Resources Information Center

Ahlin, Eileen M.

2015-01-01

Evaluation research conducted in agencies that sanction law violators is often challenging and due process may preclude evaluators from using experimental methods in traditional criminal justice agencies such as police, courts, and corrections. However, administrative agencies often deal with the same population but are not bound by due process…

An Experimental Test of CD-ROM Aided Instruction in Transnational Management.

ERIC Educational Resources Information Center

Oviatt, Benjamin M.; Bansal, Ptraima; Houghton, Susan

2000-01-01

Twenty-seven graduate students used a CD-ROM program to study transnational management, while a control group (n=26) used traditional study methods. Use of the CD-ROM was not associated with better examination performance. Implications for increased investment in new classroom technology are drawn. (Author/DB)

Rethinking Traditional Methods of Survey Validation

ERIC Educational Resources Information Center

Maul, Andrew

2017-01-01

It is commonly believed that self-report, survey-based instruments can be used to measure a wide range of psychological attributes, such as self-control, growth mindsets, and grit. Increasingly, such instruments are being used not only for basic research but also for supporting decisions regarding educational policy and accountability. The…

Controlled Trial Using Computerized Feedback to Improve Physicians' Diagnostic Judgments.

ERIC Educational Resources Information Center

Poses, Roy M.; And Others

1992-01-01

A study involving 14 experienced physicians investigated the effectiveness of a computer program (providing statistical feedback to teach a clinical diagnostic rule that predicts the probability of streptococcal pharyngitis), in conjunction with traditional lecture and periodic disease-prevalence reports. Results suggest the integrated method is a…

A novel, integrated forensic microdevice on a rotation-driven platform: Buccal swab to STR product in less than 2 h.

PubMed

Cox, Jordan O; DeCarmen, Teresa Sikes; Ouyang, Yiwen; Strachan, Briony; Sloane, Hillary; Connon, Cathey; Gibson, Kemper; Jackson, Kimberly; Landers, James P; Cruz, Tracey Dawson

2016-12-01

This work describes the development of a novel microdevice for forensic DNA processing of reference swabs. This microdevice incorporates an enzyme-based assay for DNA preparation, which allows for faster processing times and reduced sample handling. Infrared-mediated PCR (IR-PCR) is used for STR amplification using a custom reaction mixture, allowing for amplification of STR loci in 45 min while circumventing the limitations of traditional block thermocyclers. Uniquely positioned valves coupled with a simple rotational platform are used to exert fluidic control, eliminating the need for bulky external equipment. All microdevices were fabricated using laser ablation and thermal bonding of PMMA layers. Using this microdevice, the enzyme-mediated DNA liberation module produced DNA yields similar to or higher than those produced using the traditional (tube-based) protocol. Initial microdevice IR-PCR experiments to test the amplification module and reaction (using Phusion Flash/SpeedSTAR) generated near-full profiles that suffered from interlocus peak imbalance and poor adenylation (significant -A). However, subsequent attempts using KAPA 2G and Pfu Ultra polymerases generated full STR profiles with improved interlocus balance and the expected adenylated product. A fully integrated run designed to test microfluidic control successfully generated CE-ready STR amplicons in less than 2 h (<1 h of hands-on time). Using this approach, high-quality STR profiles were developed that were consistent with those produced using conventional DNA purification and STR amplification methods. This method is a smaller, more elegant solution than current microdevice methods and offers a cheaper, hands-free, closed-system alternative to traditional forensic methods. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Thermal protection system gap analysis using a loosely coupled fluid-structural thermal numerical method

NASA Astrophysics Data System (ADS)

Huang, Jie; Li, Piao; Yao, Weixing

2018-05-01

A loosely coupled fluid-structural thermal numerical method is introduced for the thermal protection system (TPS) gap thermal control analysis in this paper. The aerodynamic heating and structural thermal are analyzed by computational fluid dynamics (CFD) and numerical heat transfer (NHT) methods respectively. An interpolation algorithm based on the control surface is adopted for the data exchanges on the coupled surface. In order to verify the analysis precision of the loosely coupled method, a circular tube example was analyzed, and the wall temperature agrees well with the test result. TPS gap thermal control performance was studied by the loosely coupled method successfully. The gap heat flux is mainly distributed in the small region at the top of the gap which is the high temperature region. Besides, TPS gap temperature and the power of the active cooling system (CCS) calculated by the traditional uncoupled method are higher than that calculated by the coupled method obviously. The reason is that the uncoupled method doesn't consider the coupled effect between the aerodynamic heating and structural thermal, however the coupled method considers it, so TPS gap thermal control performance can be analyzed more accurately by the coupled method.

Computation of records of streamflow at control structures

USGS Publications Warehouse

Collins, Dannie L.

1977-01-01

Traditional methods of computing streamflow records on large, low-gradient streams require a continuous record of water-surface slope over a natural channel reach. This slope must be of sufficient magnitude to be accuratly measured with available stage measuring devices. On highly regulated streams, this slope approaches zero during periods of low flow and accurate measurement is difficult. Methods are described to calibrate multipurpose regulating control structures to more accurately compute streamflow records on highly-regulated streams. Hydraulic theory, assuming steady, uniform flow during a computational interval, is described for five different types of flow control. The controls are: Tainter gates, hydraulic turbines, fixed spillways, navigation locks, and crest gates. Detailed calibration procedures are described for the five different controls as well as for several flow regimes for some of the controls. The instrumentation package and computer programs necessary to collect and process the field data are discussed. Two typical calibration procedures and measurement data are presented to illustrate the accuracy of the methods. (Woodard-USGS)

Device for fluorescent control and photodynamic therapy of age-related macula degeneration

NASA Astrophysics Data System (ADS)

Loschenov, Victor B.; Meerovich, Gennadii A.; Budzinskaya, M. V.; Ermakova, N. A.; Shevchik, S. A.; Kharnas, Sergey S.

2004-07-01

Age-related macula degeneration (AMD) is a wide spread disease the appearance of which leads to poor eyesight and blindness. A method of treatment is not determined until today. Traditional methods, such as laser coagulation and surgical operations are rather traumatic for eye and often bring to complications. That's why recently a photodynamic method of AMD treatment is studied. Based on photodynamic occlusion of choroidal neovascularization (CNV) with minimal injury to overlying neurosensory retina what increases the efficiency.

Control of typhus fever in Finland during World War II.

PubMed

Laurent, Helene

2009-12-01

The article describes the measures taken against the threat of typhus epidemic in Finland during the Second World War. Comparisons between countries at war and their different typhus prevention methods are made. The main method of typhus prevention in Finland consisted of regular sauna bathing, which was culturally acceptable and very efficient when combined with heating of the clothing. The Finnish troops remained virtually louse-free by ecological and traditional methods, and thus the spread of typhus fever in the army could be prevented.

Comparison between Flow Cytometry and Traditional Culture Methods for Efficacy Assessment of Six Disinfectant Agents against Nosocomial Bacterial Species

PubMed Central

Massicotte, Richard; Mafu, Akier A.; Ahmad, Darakhshan; Deshaies, Francis; Pichette, Gilbert; Belhumeur, Pierre

2017-01-01

The present study was undertaken to compare the use of flow cytometry (FCM) and traditional culture methods for efficacy assessment of six disinfectants used in Quebec hospitals including: two quaternary ammonium-based, two activated hydrogen peroxide-based, one phenol-based, and one sodium hypochlorite-based. Four nosocomial bacterial species, Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, and Vancomycin-resistant Enterococci faecalis, were exposed to minimum lethal concentrations (MLCs) and sublethal concentrations (1/2 MLCs) of disinfectants under study. The results showed a strong correlation between the two techniques for the presence of dead and live cell populations, as well as, evidence of injured populations with the FCM. The only exception was observed with sodium hypochlorite at higher concentrations where fluorescence was diminished and underestimating dead cell population. The results also showed that FCM can replace traditional microbiological methods to study disinfectant efficacy on bacteria. Furthermore, FCM profiles for E. coli and E. faecalis cells exposed to sublethal concentrations exhibited distinct populations of injured cells, opening a new aspect for future research and investigation to elucidate the role of injured, cultural/noncuturable/resuscitable cell populations in infection control. PMID:28217115

Design of a temperature measurement and feedback control system based on an improved magnetic nanoparticle thermometer

NASA Astrophysics Data System (ADS)

Du, Zhongzhou; Sun, Yi; Liu, Jie; Su, Rijian; Yang, Ming; Li, Nana; Gan, Yong; Ye, Na

2018-04-01

Magnetic fluid hyperthermia, as a novel cancer treatment, requires precise temperature control at 315 K-319 K (42 °C-46 °C). However, the traditional temperature measurement method cannot obtain the real-time temperature in vivo, resulting in a lack of temperature feedback during the heating process. In this study, the feasibility of temperature measurement and feedback control using magnetic nanoparticles is proposed and demonstrated. This technique could be applied in hyperthermia. Specifically, the triangular-wave temperature measurement method is improved by reconstructing the original magnetization response of magnetic nanoparticles based on a digital phase-sensitive detection algorithm. The standard deviation of the temperature in the magnetic nanoparticle thermometer is about 0.1256 K. In experiments, the temperature fluctuation of the temperature measurement and feedback control system using magnetic nanoparticles is less than 0.5 K at the expected temperature of 315 K. This shows the feasibility of the temperature measurement method for temperature control. The method provides a new solution for temperature measurement and feedback control in hyperthermia.

Double closed-loop cascade control for lower limb exoskeleton with elastic actuation.

PubMed

Zhu, Yanhe; Zheng, Tianjiao; Jin, Hongzhe; Yang, Jixing; Zhao, Jie

2015-01-01

Unlike traditional rigid actuators, the significant features of Series Elastic Actuator (SEA) are stable torque control, lower output impedance, impact resistance and energy storage. Recently, SEA has been applied in many exoskeletons. In such applications, a key issue is how to realize the human-exoskeleton movement coordination. In this paper, double closed-loop cascade control for lower limb exoskeleton with SEA is proposed. This control method consists of inner SEA torque loop and outer contact force loop. Utilizing the SEA torque control with a motor velocity loop, actuation performances of SEA are analyzed. An integrated exoskeleton control system is designed, in which joint angles are calculated by internal encoders and resolvers and contact forces are gathered by external pressure sensors. The double closed-loop cascade control model is established based on the feedback signals of internal and external sensor. Movement experiments are accomplished in our prototype of lower limb exoskeleton. Preliminary results indicate the exoskeleton movements with pilot can be realized stably by utilizing this double closed-loop cascade control method. Feasibility of the SEA in our exoskeleton robot and effectiveness of the control method are verified.

Design of control laws for flutter suppression based on the aerodynamic energy concept and comparisons with other design methods

NASA Technical Reports Server (NTRS)

Nissim, Eli

1990-01-01

The aerodynamic energy method is used to synthesize control laws for NASA's drone for aerodynamic and structural testing-aerodynamic research wing 1 (DAST-ARW1) mathematical model. The performance of these control laws in terms of closed-loop flutter dynamic pressure, control surface activity, and robustness is compared with other control laws that relate to the same model. A control law synthesis technique that makes use of the return difference singular values is developed. It is based on the aerodynamic energy approach and is shown to yield results that are superior to those results given in the literature and are based on optimal control theory. Nyquist plots are presented, together with a short discussion regarding the relative merits of the minimum singular value as a measure of robustness as compared with the more traditional measure involving phase and gain margins.

Design of control laws for flutter suppression based on the aerodynamic energy concept and comparisons with other design methods

NASA Technical Reports Server (NTRS)

Nissim, E.

1989-01-01

The aerodynamic energy method is used in this paper to synthesize control laws for NASA's Drone for Aerodynamic and Structural Testing-Aerodynamic Research Wing 1 (DAST-ARW1) mathematical model. The performance of these control laws in terms of closed-loop flutter dynamic pressure, control surface activity, and robustness is compared against other control laws that appear in the literature and relate to the same model. A control law synthesis technique that makes use of the return difference singular values is developed in this paper. it is based on the aerodynamic energy approach and is shown to yield results superior to those given in the literature and based on optimal control theory. Nyquist plots are presented together with a short discussion regarding the relative merits of the minimum singular value as a measure of robustness, compared with the more traditional measure of robustness involving phase and gain margins.

[Molecular authentication of Jinyinhua formula granule by using allele-specific PCR].

PubMed

Jiang, Chao; Tu, Li-Chan; Yuan, Yuan; Huang, Lu-Qi; Gao, Wei; Jin, Yan

2017-07-01

Traditional authentication method is hard to identify herb's authenticity of traditional Chinese medicine(TCM) formula granules because they have lost all their morphological characteristics. In this study, a new allele-specific PCR method was established for identifying the authentication of Jinyinhua formula granule (made from Lonicerae Japonicae Flos) based on an SNP site in trnL-trnF fragment. Genomic DNA was successfully extracted from Lonicerae Japonicae Flos and its formula granules by using an improved spin column method and then PCR was performed with the designed primer. Approximately 110 bp specific bands was obtained only in the authentic Lonicerae Japonicae Flos and its formula granules, while no bands were found in fake mixed products. In addition, the PCR product sequence was proved from Lonicerae Japonicae Flos trnL-trnF sequence by using BLAST method. Therefore, DNA molecular authentication method could make up the limitations of character identification method and microscopic identification, and quickly identify herb's authenticity of TCM formula granules, with enormous potential for market supervision and quality control. Copyright© by the Chinese Pharmaceutical Association.

[Development of whole process quality control and management system of traditional Chinese medicine decoction pieces based on traditional Chinese medicine quality tree].

PubMed

Yu, Wen-Kang; Dong, Ling; Pei, Wen-Xuan; Sun, Zhi-Rong; Dai, Jun-Dong; Wang, Yun

2017-12-01

The whole process quality control and management of traditional Chinese medicine (TCM) decoction pieces is a system engineering, involving the base environment, seeds and seedlings, harvesting, processing and other multiple steps, so the accurate identification of factors in TCM production process that may induce the quality risk, as well as reasonable quality control measures are very important. At present, the concept of quality risk is mainly concentrated in the aspects of management and regulations, etc. There is no comprehensive analysis on possible risks in the quality control process of TCM decoction pieces, or analysis summary of effective quality control schemes. A whole process quality control and management system for TCM decoction pieces based on TCM quality tree was proposed in this study. This system effectively combined the process analysis method of TCM quality tree with the quality risk management, and can help managers to make real-time decisions while realizing the whole process quality control of TCM. By providing personalized web interface, this system can realize user-oriented information feedback, and was convenient for users to predict, evaluate and control the quality of TCM. In the application process, the whole process quality control and management system of the TCM decoction pieces can identify the related quality factors such as base environment, cultivation and pieces processing, extend and modify the existing scientific workflow according to their own production conditions, and provide different enterprises with their own quality systems, to achieve the personalized service. As a new quality management model, this paper can provide reference for improving the quality of Chinese medicine production and quality standardization. Copyright© by the Chinese Pharmaceutical Association.

Online market research panel members as controls in case-control studies to investigate gastrointestinal disease outbreaks: early experiences and lessons learnt from the UK.

PubMed

Mook, P; McCormick, J; Kanagarajah, S; Adak, G K; Cleary, P; Elson, R; Gobin, M; Hawker, J; Inns, T; Sinclair, C; Trienekens, S C M; Vivancos, R; McCarthy, N D

2018-03-01

Established methods of recruiting population controls for case-control studies to investigate gastrointestinal disease outbreaks can be time consuming, resulting in delays in identifying the source or vehicle of infection. After an initial evaluation of using online market research panel members as controls in a case-control study to investigate a Salmonella outbreak in 2013, this method was applied in four further studies in the UK between 2014 and 2016. We used data from all five studies and interviews with members of each outbreak control team and market research panel provider to review operational issues, evaluate risk of bias in this approach and consider methods to reduce confounding and bias. The investigators of each outbreak reported likely time and cost savings from using market research controls. There were systematic differences between case and control groups in some studies but no evidence that conclusions on the likely source or vehicle of infection were incorrect. Potential selection biases introduced by using this sampling frame and the low response rate are unclear. Methods that might reduce confounding and some bias should be balanced with concerns for overmatching. Further evaluation of this approach using comparisons with traditional methods and population-based exposure survey data is recommended.

FEM-based strain analysis study for multilayer sheet forming process

NASA Astrophysics Data System (ADS)

Zhang, Rongjing; Lang, Lihui; Zafar, Rizwan

2015-12-01

Fiber metal laminates have many advantages over traditional laminates (e.g., any type of fiber and resin material can be placed anywhere between the metallic layers without risk of failure of the composite fabric sheets). Furthermore, the process requirements to strictly control the temperature and punch force in fiber metal laminates are also less stringent than those in traditional laminates. To further explore the novel method, this study conducts a finite element method-based (FEM-based) strain analysis on multilayer blanks by using the 3A method. Different forming modes such as wrinkling and fracture are discussed by using experimental and numerical studies. Hydroforming is used for multilayer forming. The Barlat 2000 yield criteria and DYNAFORM/LS-DYNA are used for the simulations. Optimal process parameters are determined on the basis of fixed die-binder gap and variable cavity pressure. The results of this study will enhance the knowledge on the mechanics of multilayer structures formed by using the 3A method and expand its commercial applications.

Effectiveness of an e-learning tool for education on pressure ulcer evaluation.

PubMed

Morente, Laura; Morales-Asencio, José M; Veredas, Francisco J

2014-07-01

To evaluate the effectiveness of information and communication technologies in the undergraduate students' pressure ulcer training as a learning tool, compared with traditional teaching methods. Pressure ulcers constitute one of the great challenges faced by nursing professionals. Currently, pressure ulcer training is based on traditional on-campus teaching, involving lecture-style classes with frequent use of photographs of the wounds. This traditional training has some important weaknesses that can put the efficacy of the training at risk. A randomised controlled trial was developed including undergraduate nursing students. The intervention group used an adaptive self-learning e-learning tool developed by the research team (ePULab) for pressure ulcer assessment and treatment. The control group received a traditional on-campus class on the same topic. Pretest and post-test questionnaires were designed to assess the students' ability in pressure ulcer diagnosis and treatment. The educational intervention based on the use of the ePULab tool produced significantly better learning acquisition results than those obtained by traditional lecture-style classes: the total score improved in the control group from 8·23 (SD 1·23)-11·6 (SD 2·52) after the lecture, whereas in the intervention group, the knowledge score changed from 8·27 (SD 1·39)-15·83 (SD 2·52) (p = 0·01) with the use of ePULab. The results show a higher effectiveness of the devised e-learning approach for education on management of pressure ulcers. Our results reveal the suitability of the ePULab e-learning tool as an effective instrument for training on assessment of and treatment for pressure ulcers and its potential impact on clinical decision-making. © 2013 John Wiley & Sons Ltd.

Comparison of a New Auto-controlled Injection System with Traditional Syringe for Mandibular Infiltrations in Children: A Randomized Clinical Trial

PubMed Central

Deepak, Vemula; Challa, Ramasubba Reddy; Kamatham, Rekhalakshmi; Nuvvula, Sivakumar

2017-01-01

Background: Pain in the dental operatory can have a profound effect on the behavior of children. Aim: The aim of this study is to evaluate the pain perception while administering local infiltration, in children undergoing dental extractions, using a new auto-controlled injection system. Materials and Methods: Children in the age range of 6–10 years with teeth indicated for extraction were recruited and allocated to either Group I, computer-controlled injection system (auto system with special cartridge and compatible disposable 30-gauge, 10 mm needles), or Group II, traditional system (30-gauge, 10 mm needle and disposable traditional syringe). Local infiltration was administered and extraction performed after 3 min. The time of administration (TOA) of infiltrate was noted whereas anxiety and pain in both groups were assessed using the Modified Child Dental Anxiety Faces Scale simplified (MCDAS(f)), pulse rate, Faces Pain Scale-Revised (FPS-R), and Face, Legs, Activity, Cry, Consolability (FLACC) Scale. Results: The TOA was high in computer group, compared to the traditional system (P < 0.001***); however, anxiety and pain were significantly less in computer group as reported in MCDAS(f), pulse rate, FPS-R, and FLACC (P < 0.001***). Conclusions: Computer system created a positive and comfortable experience for the child, as well as the practitioner. The possibility of using buccal infiltration instead of inferior alveolar nerve block in children below 10 years was also demonstrated. PMID:28663636

Facilitating conceptual change in students’ understanding of concepts related to pressure

NASA Astrophysics Data System (ADS)

Ozkan, Gulbin; Sezgin Selcuk, Gamze

2016-09-01

The aim of this research was to explore the effects of three different types of methods of learning physics (conceptual change-based, real life context-based and traditional learning) on high school physics students in the 11th grade in terms of conceptual change they achieved in learning about the various topics (pressure exerted by solids, pressure in stagnant liquids and gases, buoyancy, Bernoulli’s principle). In this study, a pre-test/post-test quasi-experimental method with nonequivalent control group, involving a 3 (group) × 2 (time) factorial design was used. Study group 1 were given the conceptual change texts on the mentioned subjects, study group 2 were offered a teaching approach based on real life context-based learning, whereas the control group was taught in the traditional style. Data for the research were collected with the ‘pressure conceptual test’. As a result of research, the number of misconceptions had been reduced or shifted altogether in all three groups. After the instruction, it was seen that none of the students formed new misconceptions. It was found that the most positive change could be seen in the conceptual change text group followed by context-based and lastly traditional. The fact that none of the students formed new misconceptions is important, particularly since research such as the following shows that conceptual change is tenuous and inconsistent, taking time to shift in a sustained manner.

Model-Based Adaptive Event-Triggered Control of Strict-Feedback Nonlinear Systems.

PubMed

Li, Yuan-Xin; Yang, Guang-Hong

2018-04-01

This paper is concerned with the adaptive event-triggered control problem of nonlinear continuous-time systems in strict-feedback form. By using the event-sampled neural network (NN) to approximate the unknown nonlinear function, an adaptive model and an associated event-triggered controller are designed by exploiting the backstepping method. In the proposed method, the feedback signals and the NN weights are aperiodically updated only when the event-triggered condition is violated. A positive lower bound on the minimum intersample time is guaranteed to avoid accumulation point. The closed-loop stability of the resulting nonlinear impulsive dynamical system is rigorously proved via Lyapunov analysis under an adaptive event sampling condition. In comparing with the traditional adaptive backstepping design with a fixed sample period, the event-triggered method samples the state and updates the NN weights only when it is necessary. Therefore, the number of transmissions can be significantly reduced. Finally, two simulation examples are presented to show the effectiveness of the proposed control method.

Flipped clinical training: a structured training method for undergraduates in complete denture prosthesis.

PubMed

K, Anbarasi; K, Kasim Mohamed; Vijayaraghavan, Phagalvarthy; Kandaswamy, Deivanayagam

2016-12-01

To design and implement flipped clinical training for undergraduate dental students in removable complete denture treatment and predict its effectiveness by comparing the assessment results of students trained by flipped and traditional methods. Flipped training was designed by shifting the learning from clinics to learning center (phase I) and by preserving the practice in clinics (phase II). In phase I, student-faculty interactive session was arranged to recap prior knowledge. This is followed by a display of audio synchronized video demonstration of the procedure in a repeatable way and subsequent display of possible errors that may occur in treatment with guidelines to overcome such errors. In phase II, live demonstration of the procedure was given. Students were asked to treat three patients under instructor's supervision. The summative assessment was conducted by applying the same checklist criterion and rubric scoring used for the traditional method. Assessment results of three batches of students trained by flipped method (study group) and three traditionally trained previous batches (control group) were taken for comparison by chi-square test. The sum of traditionally trained three batch students who prepared acceptable dentures (score: 2 and 3) and unacceptable dentures (score: 1) was compared with the same of flipped trained three batch students revealed that the number of students who demonstrated competency by preparing acceptable dentures was higher for flipped training (χ 2 =30.996 with p<0.001). The results reveal the supremacy of flipped training in enhancing students competency and hence recommended for training various clinical procedures.

Motion planning and synchronized control of the dental arch generator of the tooth-arrangement robot.

PubMed

Jiang, Jin-Gang; Zhang, Yong-De

2013-03-01

The traditional, manual method of reproducing the dental arch form is prone to numerous random errors caused by human factors. The purpose of this study was to investigate the automatic acquisition of the dental arch and implement the motion planning and synchronized control of the dental arch generator of the multi-manipulator tooth-arrangement robot for use in full denture manufacture. First, the mathematical model of the dental arch generator was derived. Then the kinematics and control point position of the dental arch generator of the tooth arrangement robot were calculated and motion planning of each control point was analysed. A hardware control scheme is presented, based on the industrial personal computer and control card PC6401. In order to gain single-axis, precise control of the dental arch generator, we studied the control pulse realization of high-resolution timing. Real-time, closed-loop, synchronous control was applied to the dental arch generator. Experimental control of the dental arch generator and preliminary tooth arrangement were gained by using the multi-manipulator tooth-arrangement robotic system. The dental arch generator can automatically generate a dental arch to fit a patient according to the patient's arch parameters. Repeated positioning accuracy is 0.12 mm for the slipways that drive the dental arch generator. The maximum value of single-point error is 1.83 mm, while the arc-width direction (x axis) is -33.29 mm. A novel system that generates the dental arch has been developed. The traditional method of manually determining the dental arch may soon be replaced by a robot to assist in generating a more individual dental arch. The system can be used to fabricate full dentures and bend orthodontic wires. Copyright © 2012 John Wiley & Sons, Ltd.

A comparison of walk-in counselling and the wait list model for delivering counselling services.

PubMed

Stalker, Carol A; Riemer, Manuel; Cait, Cheryl-Anne; Horton, Susan; Booton, Jocelyn; Josling, Leslie; Bedggood, Joanna; Zaczek, Margaret

2016-10-01

Walk-in counselling has been used to reduce wait times but there are few controlled studies to compare outcomes between walk-in and the traditional model of service delivery. To compare change in psychological distress by clients receiving services from two models of service delivery, a walk-in counselling model and a traditional counselling model involving a wait list. Mixed-methods sequential explanatory design including quantitative comparison of groups with one pre-test and two follow-ups, and qualitative analysis of interviews with a sub-sample. Five-hundred and twenty-four participants ≥16 years were recruited from two Family Counselling Agencies; the General Health Questionnaire-12 assessed change in psychological distress. Hierarchical linear modelling revealed clients of the walk-in model improved faster and were less distressed at the four-week follow-up compared to the traditional service delivery model. Ten weeks later, both groups had improved and were similar. Participants receiving instrumental services prior to baseline improved more slowly. The qualitative data confirmed participants highly valued the accessibility of the walk-in model, and were frustrated by the lengthy waits associated with the traditional model. This study improves methodologically on previous studies of walk-in counselling, an approach to service delivery not conducive to randomized controlled trials.

Optimal Power Flow Pursuit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dall'Anese, Emiliano; Simonetto, Andrea

This paper considers distribution networks featuring inverter-interfaced distributed energy resources, and develops distributed feedback controllers that continuously drive the inverter output powers to solutions of AC optimal power flow (OPF) problems. Particularly, the controllers update the power setpoints based on voltage measurements as well as given (time-varying) OPF targets, and entail elementary operations implementable onto low-cost microcontrollers that accompany power-electronics interfaces of gateways and inverters. The design of the control framework is based on suitable linear approximations of the AC power-flow equations as well as Lagrangian regularization methods. Convergence and OPF-target tracking capabilities of the controllers are analytically established. Overall,more » the proposed method allows to bypass traditional hierarchical setups where feedback control and optimization operate at distinct time scales, and to enable real-time optimization of distribution systems.« less

Enhancing the gate fidelity of silicon-based singlet-triplet qubits under symmetric exchange control using optimized pulse sequences

NASA Astrophysics Data System (ADS)

Zhang, Chengxian; Throckmorton, Robert; Yang, Xu-Chen; Wang, Xin; Barnes, Edwin

We perform Randomized Benchmarking of a family of recently introduced control scheme for singlet-triplet qubits in semiconductor double quantum dots, which is optimized to have substantially shorter gate times. We study their performances under the recently introduced symmetric control scheme of changing the exchange interaction by raising and lowering the barrier between the two dots (barrier control) and compare these results to those under the traditional tilt control method in which the exchange interaction is varied by detuning. It has been suggested that the barrier control method encounters a much smaller charge noise. We found that for the cases where the charge noise is dominant, corresponding to the device made on isotopically enriched silicon, the optimized sequences offer much longer coherence time under barrier control compared to the tilt control method of the strength of the exchange interaction. This work was supported by the Research Grants Council of Hong Kong SAR (No. CityU 21300116) and the National Natural Science Foundation of China (No. 11604277), and by LPS-MPO-CMTC.

Market-oriented Programming Using Small-world Networks for Controlling Building Environments

NASA Astrophysics Data System (ADS)

Shigei, Noritaka; Miyajima, Hiromi; Osako, Tsukasa

The market model, which is one of the economic activity models, is modeled as an agent system, and applying the model to the resource allocation problem has been studied. For air conditioning control of building, which is one of the resource allocation problems, an effective method based on the agent system using auction has been proposed for traditional PID controller. On the other hand, it has been considered that this method is performed by decentralized control. However, its decentralization is not perfect, and its performace is not enough. In this paper, firstly, we propose a perfectly decentralized agent model and show its performance. Secondly, in order to improve the model, we propose the agent model based on small-world model. The effectiveness of the proposed model is shown by simulation.

Analysis of Informationization Construction of Business Financial Management under the Network Economy

NASA Astrophysics Data System (ADS)

Dong, Yahui; Zhang, Pengwei; Li, Wei

To strengthen the informationization construction of the financial management has great significance to the achievement of business management informationization, and under the network economic environment, it is an important task of the financial management that how to conduct informationization construction of traditional financial management to provide true, reliable and complete financial information system for the business managers. This paper thoroughly researches the problem of financial information orientation management (FIOM) by taking the method of combining theory with practice. This paper puts forward the thinking method of financial information management, makes the new contents of E-finance. At last, this paper rebuilds the system of finance internal control from four aspects such as control of organization and management, system development control and safety control of network system.

Molecularly Imprinted Polymer of Colocynthin, An Effective Tool for Quality Control of Citrullus colocynthis Extracts.

PubMed

Farid, Ramezani; Mahnaz, Khanavi; Ardekani Mohammad Reza, Shams; Börje, Sellergren; Mahdieh, Eftekhari; Hossein, Rastegar; Maryam, Shekarchi

2017-01-01

Different parts of Colocynth, Citrullus colocynthis (L.) Schrad., are used in traditional phytotherapy and homeopathy. In our new approach, a molecularly imprinted polymer was synthesized to absorb colocynthin, the major plant marker, and its capability was evaluated using HPLC-UV. A new method was considered to achieve optimal conditions. FT-infrared, N2 adsorption porosimetry, fluorescent and scanning electron microscopy and thermo gravimetric profile of the polymers were studied. The imprinted polymer was applied as molecularly imprinted solid phase extraction sorbent to enrich colocynthin from colocynth oil extract, a traditional medicine dosage form. The imprinted polymer showed high capacity and affinity toward colocynthin. Physical assessments demonstrated no major differences between imprinted and nonimprinted polymers. The imprinted polymer was able to absorb colocynthin more efficiently than non-imprinted and control simple solvent extraction from the real sample. In conclusion, this polymer is capable of being applied as a promising adsorbent for analysis of colocynth traditional medicine products. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Designing Serious Games for Safety Education: "Learn to Brace" versus Traditional Pictorials for Aircraft Passengers.

PubMed

Chittaro, Luca

2016-05-01

Serious games for safety education (SGSE) are a novel tool for preparing people to prevent and\\or handle risky situations. Although several SGSE have been developed, design and evaluation methods for SGSE need to be better grounded in and guided by safety-relevant psychological theories. In particular, this paper focuses on threat appeals and the assessment of variables, such as safety locus of control, that influence human behavior in real risky situations. It illustrates how we took into account such models in the design and evaluation of "Learn to Brace", a first-of-its-kind serious game that deals with a major problem in aviation safety, i.e. the scarce effectiveness of the safety cards used by airlines. The study considered a sample of 48 users: half of them received instructions about the brace position through the serious game, the other half through a traditional safety card pictorial. Results showed that the serious game was much more effective than the traditional instructions both in terms of learning and of changing safety-relevant perceptions, especially safety locus of control and recommendation perception.

The comparison of two methods to manufacture fused biconical tapered optical fiber coupler

NASA Astrophysics Data System (ADS)

Wang, Yue; Liu, Hairong

2009-08-01

Optical fiber coupler is a directional coupler which is crucial component for optical fiber communication systems. The fused biconical taper is the most important method in facture of optical fiber coupler, with many advantages of low excess loss, precise coupling ratio, good consistency and stability. In this paper we have introduced a new method to manufacture optical fiber coupler. And more over the new manufacture process has been compared with the traditional manufacture method. In the traditional crafts, two optical fibers are parallel placed, and then use the method of tie a knot of the two optical fibers. In the new process, a new program of fiber placement is introduced. Two optical fibers are parallel placed in the middle of the fixture, and then in order to make the bare part of the optical fiber close as much as possible, the new plan using high temperature resistant material bind the both end of the fiber which are not removing the cladding. After many contrast tests, we can see that adopt the improved method of fiber placement, during the process of fiber pulling, the variation of optical power in the directional arm and the coupler arm are more smooth and steady. But the excess loss (EL) generated in the process of pulling is a bit higher than the traditional method of tie a knot. The tests show that the new method of optical fiber placement is feasible in the actual projects for the manufacture of coupler with low coupling ratio, but for the control of the EL still need further studying.

A three dimensional point cloud registration method based on rotation matrix eigenvalue

NASA Astrophysics Data System (ADS)

Wang, Chao; Zhou, Xiang; Fei, Zixuan; Gao, Xiaofei; Jin, Rui

2017-09-01

We usually need to measure an object at multiple angles in the traditional optical three-dimensional measurement method, due to the reasons for the block, and then use point cloud registration methods to obtain a complete threedimensional shape of the object. The point cloud registration based on a turntable is essential to calculate the coordinate transformation matrix between the camera coordinate system and the turntable coordinate system. We usually calculate the transformation matrix by fitting the rotation center and the rotation axis normal of the turntable in the traditional method, which is limited by measuring the field of view. The range of exact feature points used for fitting the rotation center and the rotation axis normal is approximately distributed within an arc less than 120 degrees, resulting in a low fit accuracy. In this paper, we proposes a better method, based on the invariant eigenvalue principle of rotation matrix in the turntable coordinate system and the coordinate transformation matrix of the corresponding coordinate points. First of all, we control the rotation angle of the calibration plate with the turntable to calibrate the coordinate transformation matrix of the corresponding coordinate points by using the least squares method. And then we use the feature decomposition to calculate the coordinate transformation matrix of the camera coordinate system and the turntable coordinate system. Compared with the traditional previous method, it has a higher accuracy, better robustness and it is not affected by the camera field of view. In this method, the coincidence error of the corresponding points on the calibration plate after registration is less than 0.1mm.

H∞ controller design for a 4-meter direct-drive azimuth axis

NASA Astrophysics Data System (ADS)

Chen, Li-Yan; Zhang, Zhen-Chao; Song, Xiao-Li; Wang, Da-Xing

2015-11-01

To pursue a higher imaging resolution for exploring more details in the information conveyed by the Universe, the next generation of optical telescopes based on a direct drive widely employ the extremely large aperture structure, which also introduces more disturbances and uncertain factors to the control system. Facing this new challenge, the PID control method in main-axis control systems of traditional astronomical telescopes cannot suffice for the requirement of the tracking precision and disturbance sensitivity in angular velocity. To overcome this shortcoming, we establish a dynamic model and propose an H∞ controller for a 4-meter azimuth direct drive control system that consists of a revolving platform (azimuth axis), a three-phase torque motor, a motor drive, an encoder, a data acquisition card and a small computers. Simulations are carried out to analyze the model and guide the real experiments. Experimental results show that the proposed H∞ controller reduces the tracking error by a maximum of 80.69% (average 57.8%) and the disturbance sensitivity by a maximum of 82.3% (average 50.96%) compared with the traditional tuned PI controller; furthermore, the order of the model describing the proposed controller can be reduced to three, thus its feasibility in real systems is guaranteed.

Anti-tick biological control agents: assessment and future perspectives

USGS Publications Warehouse

Samish, M.; Ginsberg, H.S.; Glazer, I.; Bowman, Alan. S.; Nuttall, Patricia A.

2008-01-01

Widespread and increasing resistance to most available acaracides threatens both global livestock industries and public health. This necessitates better understanding of ticks and the diseases they transmit in the development of new control strategies. Ticks: Biology, Disease and Control is written by an international collection of experts and covers in-depth information on aspects of the biology of the ticks themselves, various veterinary and medical tick-borne pathogens, and aspects of traditional and potential new control methods. A valuable resource for graduate students, academic researchers and professionals, the book covers the whole gamut of ticks and tick-borne diseases from microsatellites to satellite imagery and from exploiting tick saliva for therapeutic drugs to developing drugs to control tick populations. It encompasses the variety of interconnected fields impinging on the economically important and biologically fascinating phenomenon of ticks, the diseases they transmit and methods of their control.

Comparative study on the measurement of learning outcomes after powerpoint presentation and problem based learning with discussion in family medicine amongst fifth year medical students.

PubMed

Khobragade, Sujata; Abas, Adinegara Lutfi; Khobragade, Yadneshwar Sudam

2016-01-01

Learning outcomes after traditional teaching methods were compared with problem-based learning (PBL) among fifth year medical students. Six students participated each in traditional teaching and PBL methods, respectively. Traditional teaching method involved PowerPoint (PPT) presentation and PBL included study on case scenario and discussion. Both methods were effective in improving performance of students. Postteaching, we did not find significant differences in learning outcomes between these two teaching methods. (1) Study was conducted with an intention to find out which method of learning is more effective; traditional or PBL. (2) To assess the level of knowledge and understanding in anemia/zoonotic diseases as against diabetes/hypertension. All the students posted from February 3, 2014, to March 14, 2014, participated in this study. Six students were asked to prepare and present a lecture (PPT) and subsequent week other six students were asked to present PBL. Both groups presented different topics. Since it was a pre- and post-test, same students were taken as control. To maintain uniformity and to avoid bias due cultural diversity, language etc., same questions were administered. After taking verbal consent, all 34 students were given pretest on anemia and zoonotic diseases. Then lecture (PPT) by six students on the same topic was given it followed by posttest questionnaire. Subsequent week pretest was conducted on hypertension and diabetes. Then case scenario presentation and discussion (PBL) was done by different six students followed by posttest. Both the methods were compared. Analysis was done manually and standard error of means and students t -test was used to find out statistical significance. We found statistically significant improvement in performance of students after PPT presentation as well as PBL. Both methods are equally effective. However, Pretest results of students in anemia and zoonotic diseases (Group A) were poor compared to pretest results of students in hypertension and diabetes (Group B). The students who participated in presentation did not influence their performance as they were covering a small part of the topic and there were no differences in their marks compared to other students. We did not find significant differences in outcome after teaching between PBL and traditional methods. Performances of students were poor in anemia and zoonotic diseases which need remedial teaching. Assessment may influence retention ability and performance.

Splines and control theory

NASA Technical Reports Server (NTRS)

Zhang, Zhimin; Tomlinson, John; Martin, Clyde

1994-01-01

In this work, the relationship between splines and the control theory has been analyzed. We show that spline functions can be constructed naturally from the control theory. By establishing a framework based on control theory, we provide a simple and systematic way to construct splines. We have constructed the traditional spline functions including the polynomial splines and the classical exponential spline. We have also discovered some new spline functions such as trigonometric splines and the combination of polynomial, exponential and trigonometric splines. The method proposed in this paper is easy to implement. Some numerical experiments are performed to investigate properties of different spline approximations.

Evaluation of a Computer Simulation in a Therapeutics Case Discussion.

ERIC Educational Resources Information Center

Kinkade, Raenel E.; And Others

1995-01-01

A computer program was used to simulate a case presentation in pharmacotherapeutics. Students (n=24) used their knowledge of the disease (glaucoma) and various topical agents on the computer program's formulary to "treat" the patient. Comparison of results with a control group found the method as effective as traditional case…

Nunavik: Inuit-Controlled Education in Arctic Quebec. Northern Lights Series.

ERIC Educational Resources Information Center

Vick-Westgate, Ann

This book documents the debate among the Inuit of Nunavik (northern Quebec) over the purposes, strengths, and weaknesses of public schools in their 14 arctic communities. The book begins with a summary of the history of education in Nunavik, including traditional Inuit methods and purposes of education. The 14 communities comprise the Kativik…

Problem-Based Learning and High School Macroeconomics: A Comparative Study of Instructional Methods

ERIC Educational Resources Information Center

Maxwell, Nan L.; Mergendoller, John R.; Bellisimo, Yolanda

2005-01-01

The authors examined the potential differences between problem-based learning (PBL) and traditional instructional approaches in building knowledge of macroeconomic concepts and principles in high school students. Using data from 252 economics students at 11 high schools and controlling for individual characteristics, most notably verbal ability,…

The Implementation of a Positive Behaviour Management Programme in a Primary Classroom: A Case Study.

ERIC Educational Resources Information Center

Atherley, Carole

1990-01-01

Positive behavior management has been recommended as a more acceptable form of classroom management than traditional behavioral modification. This paper discusses the application of stimulus and contingency control methods (positive behavior management) to elicit more socially and academically acceptable behavior from elementary school children.…

Creating and Working with Control Charts in Excel

ERIC Educational Resources Information Center

Schikora, Paul F.

2017-01-01

With the growth in distance education offerings, instructors who now teach quantitative material via the web have been faced with many challenges. Foremost has been the need to develop appropriate methods for teaching such material to students who are not physically in the classroom. Methodologies that have traditionally been taught in a highly…

Eukaryotic cell flattening

NASA Astrophysics Data System (ADS)

Bae, Albert; Westendorf, Christian; Erlenkamper, Christoph; Galland, Edouard; Franck, Carl; Bodenschatz, Eberhard; Beta, Carsten

2010-03-01

Eukaryotic cell flattening is valuable for improving microscopic observations, ranging from bright field to total internal reflection fluorescence microscopy. In this talk, we will discuss traditional overlay techniques, and more modern, microfluidic based flattening, which provides a greater level of control. We demonstrate these techniques on the social amoebae Dictyostelium discoideum, comparing the advantages and disadvantages of each method.

Auditory Learning Using a Portable Real-Time Vocoder: Preliminary Findings

ERIC Educational Resources Information Center

Casserly, Elizabeth D.; Pisoni, David B.

2015-01-01

Purpose: Although traditional study of auditory training has been in controlled laboratory settings, interest has been increasing in more interactive options. The authors examine whether such interactive training can result in short-term perceptual learning, and the range of perceptual skills it impacts. Method: Experiments 1 (N = 37) and 2 (N =…

Explosively generated shock wave processing of metal powders by instrumented detonics

NASA Astrophysics Data System (ADS)

Sharma, A. D.; Sharma, A. K.; Thakur, N.

2013-06-01

The highest pressures generated by dynamic processes resulting either from high velocity impact or by spontaneous release of high energy rate substances in direct contact with a metal find superior applications over normal mechanical means. The special feature of explosive loading to the powder materials over traditional methods is its controlled detonation pressure which directly transmits shock energy to the materials which remain entrapped inside powder resulting into several micro-structural changes and hence improved mechanical properties. superalloy powders have been compacted nearer to the theoretical density by shock wave consolidation. In a single experimental set-up, compaction of metal powder and measurement of detonation velocity have been achieved successfully by using instrumented detonics. The thrust on the work is to obtain uniform, crack-free and fracture-less compacts of superalloys having intact crystalline structure as has been examined from FE-SEM, XRD and mechanical studies. Shock wave processing is an emerging technique and receiving much attention of the materials scientists and engineers owing to its excellent advantages over traditional metallurgical methods due to short processing time, scaleup advantage and controlled detonation pressure.

Output Feedback Distributed Containment Control for High-Order Nonlinear Multiagent Systems.

PubMed

Li, Yafeng; Hua, Changchun; Wu, Shuangshuang; Guan, Xinping

2017-01-31

In this paper, we study the problem of output feedback distributed containment control for a class of high-order nonlinear multiagent systems under a fixed undirected graph and a fixed directed graph, respectively. Only the output signals of the systems can be measured. The novel reduced order dynamic gain observer is constructed to estimate the unmeasured state variables of the system with the less conservative condition on nonlinear terms than traditional Lipschitz one. Via the backstepping method, output feedback distributed nonlinear controllers for the followers are designed. By means of the novel first virtual controllers, we separate the estimated state variables of different agents from each other. Consequently, the designed controllers show independence on the estimated state variables of neighbors except outputs information, and the dynamics of each agent can be greatly different, which make the design method have a wider class of applications. Finally, a numerical simulation is presented to illustrate the effectiveness of the proposed method.

Effects of group sexual counseling on the traditional perceptions and attitudes of Iranian pregnant women

PubMed Central

Navidian, Ali; Rigi, Shahindokht Navabi; Soltani, Parvin

2016-01-01

Background Marital relationships may fluctuate due to physical and psychological changes during pregnancy. This study aimed to investigate the effect of group sexual counseling on the traditional perceptions and attitudes of pregnant women. Methods This was a quasiexperimental intervention study. Among the pregnant women who were referred to health care centers in Zahedan, Iran, in 2015 for routine care during pregnancy, 100 individuals were chosen and randomly categorized into two groups: intervention (n=50) and control (n=50). Variables were the participant’s attitudes and beliefs on sexual activity during pregnancy. The data were collected during pregnancy using the Sexual Activities and Attitudes Questionnaire. The questionnaire was completed before and 6 weeks after five sessions of group sexual counseling. Data were analyzed using SPSS software (Version 20) with descriptive and analytical statistics. Results The mean of score changes for sexual attitudes and traditional perceptions in the intervention group was significantly higher than that in the control group (P<0.0001). Analysis of covariance also showed that the mean score of the participant’s traditional perceptions and sexual attitudes in both groups was significantly different after the group sexual counseling. Discussion Due to the positive effect of group sexual counseling on improving the attitudes of pregnant women about sexual issues and reframing the traditional perceptions over sexual activities during pregnancy, it is recommended that this educational intervention should be integrated into counseling and prenatal care for pregnant women. PMID:27366105

Cognitive Profiles of Mathematical Problem Solving Learning Disability for Different Definitions of Disability

PubMed Central

Tolar, Tammy D.; Fuchs, Lynn; Fletcher, Jack M.; Fuchs, Douglas; Hamlett, Carol L.

2014-01-01

Three cohorts of third-grade students (N = 813) were evaluated on achievement, cognitive abilities, and behavioral attention according to contrasting research traditions in defining math learning disability (LD) status: low achievement versus extremely low achievement and IQ-achievement discrepant versus strictly low-achieving LD. We use methods from these two traditions to form math problem solving LD groups. To evaluate group differences, we used MANOVA-based profile and canonical analyses to control for relations among the outcomes and regression to control for group definition variables. Results suggest that basic arithmetic is the key distinguishing characteristic that separates low-achieving problem solvers (including LD, regardless of definition) from typically achieving students. Word problem solving is the key distinguishing characteristic that separates IQ-achievement-discrepant from strictly low-achieving LD students, favoring the IQ-achievement-discrepant students. PMID:24939971

Assessing the Impact of Voice-Over Screen-Captured Presentations Delivered Online on Dental Students' Learning.

PubMed

Schönwetter, Dieter J; Gareau-Wilson, Nicole; Cunha, Rodrigo Sanches; Mello, Isabel

2016-02-01

The traditional lecturing method is still one of the most common forms of delivering content to students in dental education, but innovative learning technologies have the potential to improve the effectiveness and quality of teaching dental students. What challenges instructors is the extent to which these learning tools have a direct impact on student learning outcomes. The aim of this study was to assess the impact of a voice-over screen-captured learning tool by identifying a positive, nil, or negative impact on student learning as well as student engagement (affective, behavioral, and cognitive) when compared to the traditional face-to-face lecture. Extraneous variables thought to impact student learning were controlled by the use of baseline measures as well as random assignment of second-year dental students to one of two teaching conditions: voice-over screen-captured presentation delivered online and the traditional classroom lecture. A total of 28 students enrolled in the preclinical course in endodontics at a Canadian dental school participated in the study, 14 in each of the two teaching conditions. The results showed that, in most cases, the students who experienced the online lecture had somewhat higher posttest scores and perceived satisfaction levels than those in the face-to-face lecture group, but the differences did not achieve statistical significance except for their long-term recognition test scores. This study found that the students had comparable learning outcomes whether they experienced the face-to-face or the online lecture, but that the online lecture had a more positive impact on their long-term learning. The controls for extraneous variables used in this study suggest ways to improve research into the comparative impact of traditional and innovative teaching methods on student learning outcomes.

Prevalence of depressive symptoms among medical students taught using problem-based learning versus traditional methods.

PubMed

Aragão, José Aderval; Freire, Marianna Ribeiro de Menezes; Nolasco Farias, Lucas Guimarães; Diniz, Sarah Santana; Sant'anna Aragão, Felipe Matheus; Sant'anna Aragão, Iapunira Catarina; Lima, Tarcisio Brandão; Reis, Francisco Prado

2018-06-01

To compare depressive symptoms among medical students taught using problem-based learning (PBL) and the traditional method. Beck's Depression Inventory was applied to 215 medical students. The prevalence of depression was calculated as the number of individuals with depression divided by the total number in the sample from each course, with 95% confidence intervals. The statistical significance level used was 5% (p ≤ .05). Among the 215 students, 52.1% were male and 47.9% were female; and 51.6% were being taught using PBL methodology and 48.4% using traditional methods. The prevalence of depression was 29.73% with PBL and 22.12% with traditional methods. There was higher prevalence among females: 32.8% with PBL and 23.1% with traditional methods. The prevalence of depression with PBL among students up to 21 years of age was 29.4% and among those over 21 years, 32.1%. With traditional methods among students up to 21 years of age, it was 16.7%%, and among those over 21 years, 30.1%. The prevalence of depression with PBL was highest among students in the second semester and with traditional methods, in the eighth. Depressive symptoms were highly prevalent among students taught both with PBL and with traditional methods.

A comparison of online versus face-to-face teaching delivery in statistics instruction for undergraduate health science students.

PubMed

Lu, Fletcher; Lemonde, Manon

2013-12-01

The objective of this study was to assess if online teaching delivery produces comparable student test performance as the traditional face-to-face approach irrespective of academic aptitude. This study involves a quasi-experimental comparison of student performance in an undergraduate health science statistics course partitioned in two ways. The first partition involves one group of students taught with a traditional face-to-face classroom approach and the other through a completely online instructional approach. The second partition of the subjects categorized the academic aptitude of the students into groups of higher and lower academically performing based on their assignment grades during the course. Controls that were placed on the study to reduce the possibility of confounding variables were: the same instructor taught both groups covering the same subject information, using the same assessment methods and delivered over the same period of time. The results of this study indicate that online teaching delivery is as effective as a traditional face-to-face approach in terms of producing comparable student test performance but only if the student is academically higher performing. For academically lower performing students, the online delivery method produced significantly poorer student test results compared to those lower performing students taught in a traditional face-to-face environment.

Comparing two methods of education (virtual versus traditional) on learning of Iranian dental students: a post-test only design study.

PubMed

Moazami, Fariborz; Bahrampour, Ehsan; Azar, Mohammad Reza; Jahedi, Farzad; Moattari, Marzieh

2014-03-05

The importance of using technologies such as e-learning in different disciplines is discussed in the literature. Researchers have measured the effectiveness of e-learning in a number of fields.Considering the lack of research on the effectiveness of online learning in dental education particularly in Iran, the advantages of these learning methods and the positive university atmosphere regarding the use of online learning. This study, therefore, aims to compare the effects of two methods of teaching (virtual versus traditional) on student learning. This post-test only design study approached 40, fifth year dental students of Shiraz University of Medical Sciences. From this group, 35 students agreed to participate. These students were randomly allocated into two groups, experimental (virtual learning) and comparison (traditional learning). To ensure similarity between groups, we compared GPAs of all participants by the Mann-Whitney U test (P > 0.05). The experimental group received a virtual learning environment courseware package specifically designed for this study, whereas the control group received the same module structured in a traditional lecture form. The virtual learning environment consisted of online and offline materials. Two identical valid, reliable post-tests that consisted of 40 multiple choice questions (MCQs) and 4 essay questions were administered immediately (15 min) after the last session and two months later to assess for knowledge retention. Data were analyzed by SPSS version 20. A comparison of the mean knowledge score of both groups showed that virtual learning was more effective than traditional learning (effect size = 0.69). The newly designed virtual learning package is feasible and will result in more effective learning in comparison with lecture-based training. However further studies are needed to generalize the findings of this study.

Effectiveness of concept mapping and traditional linear nursing care plans on critical thinking skills in clinical pediatric nursing course

PubMed Central

Aein, Fereshteh; Aliakbari, Fatemeh

2017-01-01

Introduction: Concept map is a useful cognitive tool for enhancing a student's critical thinking (CT) by encouraging students to process information deeply for understanding. However, the evidence regarding its effectiveness on nursing students’ CT is contradictory. This paper compares the effectiveness of concept mapping and traditional linear nursing care planning on students’ CT. Methods: An experimental design was used to examine the CT of 60 baccalaureate students who participated in pediatric clinical nursing course in the Shahrekord University of Medical Sciences, Shahrekord, Iran in 2013. Results: Participants were randomly divided into six equal groups of each 10 student, of which three groups were the control group, and the others were the experimental group. The control group completed nine traditional linear nursing care plans, whereas experimental group completed nine concept maps during the course. Both groups showed significant improvement in overall and all subscales of the California CT skill test from pretest to posttest (P < 0.001), but t-test demonstrated that improvement in students’ CT skills in the experimental group was significantly greater than in the control group after the program (P < 0.001). Conclusions: Our findings support that concept mapping can be used as a clinical teaching-learning activity to promote CT in nursing students. PMID:28546978

The Problem Solving Method in Teaching Physics in Elementary School

NASA Astrophysics Data System (ADS)

Jandrić, Gordana Hajduković; Obadović, Dušanka Ž.; Stojanović, Maja

2010-01-01

The most of the teachers ask if there is a "best" known way to teach. The most effective teaching method depends on the specific goals of the course and the needs of the students. An investigation has been carried out to compare the effect of teaching selected physics topics using problem-solving method on the overall achievements of the acquired knowledge and teaching the same material by traditional teaching method. The investigation was performed as a pedagogical experiment of the type of parallel groups with randomly chosen sample of students attending grades eight. The control and experimental groups were equalized in the relevant pedagogical parameters. The obtained results were treated statistically. The comparison showed a significant difference in respect of the speed of acquiring knowledge, the problem-solving teaching being advantageous over traditional methodDo not replace the word "abstract," but do replace the rest of this text. If you must insert a hard line break, please use Shift+Enter rather than just tapping your "Enter" key. You may want to print this page and refer to it as a style sample before you begin working on your paper.

SU-E-T-207: Comparison of Integrated Tissue Air Ratio (ITAR) to Traditional TAR for Kilovoltage Pencil-Beams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanlon, J; Koruga, I; Chell, E

2015-06-15

Purpose: Clinically viable depth dose determination in kilovoltage pencil-beams is a great challenge that resulted in a published dosimetry method called ITAR, which involves measurement of air kerma and attenuation with a detector in a low scatter environment coupled with MCNP scatter calculations. The objective of this work is to compare ITAR to traditional TAR using inherently water-proof microchambers that have only recently become commercially available. Methods: An Exradin A26 microchamber was centered 150 mm from a 100 kVp x-ray source with 2 mm aluminum HVL. Depth dose in water from 16 to 24 mm in 2 mm increments wasmore » determined by: (1) placing blocks of Plastic Water LR near the source to minimize scatter and using previously published conversion coefficients [ITAR method] and (2) submerging the detector in a water tank with 2 mm thick Plastic Water LR walls and jogging the tank with motor controllers while keeping the detector position fixed [traditional TAR method]. Each method was repeated four to five times. For each repetition, dose was measured free in-air to normalize the data for exponential regression. Results: Traditional TAR indicated higher depth dose than ITAR; differences ranged from 2.1% at 24 mm depth to 2.5% at 16 mm depth. However, the results of traditional TAR did not include a correction for Pq,cham because it is unknown for this detector type in these conditions. It is estimated that the component of Pq,cham due to the effect of water displacement alone is ∼0.94, but Pq,cham is likely several percent larger than 0.94 due to the energy dependency of the microchamber in the presence of low energy scatter that is not present during in-air calibration. Conclusion: The ITAR method remains preferable for clinical depth dose determination in kilovoltage pencil-beams due to Pq,cham being unknown for suitable detectors in relevant conditions. All four of the authors are either current full time employees, which include stock option grants, or consultants of Oraya Therapeutics Inc.« less

Aconitum in traditional Chinese medicine: a valuable drug or an unpredictable risk?

PubMed

Singhuber, Judith; Zhu, Ming; Prinz, Sonja; Kopp, Brigitte

2009-10-29

Aconitum species have been used in China as an essential drug in Traditional Chinese Medicine (TCM) for 2000 years. Reviewing the clinical application of Aconitum, their pharmacological effects, toxicity and detoxifying measures, herb-herb interactions, clinical taboos, famous herbal formulas, traditional and current herbal processing methods based upon a wide range of literature investigations serve as a case study to explore the multidisciplinary implications of botanicals used in TCM. The toxicological risk of improper usage of Aconitum remains very high, especially in countries like China, India and Japan. The toxicity of Aconitum mainly derives from the diester diterpene alkaloids (DDAs) including aconitine (AC), mesaconitine (MA) and hypaconitine (HA). They can be decomposed into less or non-toxic derivatives through Chinese traditional processing methods (Paozhi), which play an essential role in detoxification. Using Paozhi, the three main forms of processed aconite -- yanfuzi, heishunpian and baifupian -- can be obtained (CPCommission, 2005). Moreover, some new processing techniques have been developed in China such as pressure-steaming. The current development of fingerprint assays, in particular HPLC, has set a good basis to conduct an appropriate quality control for TCM crude herbs and their ready-made products. Therefore, a stipulation for a maximum level of DDA content of Aconitum is highly desirable in order to guarantee the clinical safety and its low toxicity in decoctions. Newly developed HPLC methods have made the accurate and simultaneous determination and quantification of DDA content interesting.

Protocol independent transmission method in software defined optical network

NASA Astrophysics Data System (ADS)

Liu, Yuze; Li, Hui; Hou, Yanfang; Qiu, Yajun; Ji, Yuefeng

2016-10-01

With the development of big data and cloud computing technology, the traditional software-defined network is facing new challenges (e.i., ubiquitous accessibility, higher bandwidth, more flexible management and greater security). Using a proprietary protocol or encoding format is a way to improve information security. However, the flow, which carried by proprietary protocol or code, cannot go through the traditional IP network. In addition, ultra- high-definition video transmission service once again become a hot spot. Traditionally, in the IP network, the Serial Digital Interface (SDI) signal must be compressed. This approach offers additional advantages but also bring some disadvantages such as signal degradation and high latency. To some extent, HD-SDI can also be regard as a proprietary protocol, which need transparent transmission such as optical channel. However, traditional optical networks cannot support flexible traffics . In response to aforementioned challenges for future network, one immediate solution would be to use NFV technology to abstract the network infrastructure and provide an all-optical switching topology graph for the SDN control plane. This paper proposes a new service-based software defined optical network architecture, including an infrastructure layer, a virtualization layer, a service abstract layer and an application layer. We then dwell on the corresponding service providing method in order to implement the protocol-independent transport. Finally, we experimentally evaluate that proposed service providing method can be applied to transmit the HD-SDI signal in the software-defined optical network.

[Essential procedure and key methods for survey of traditional knowledge related to Chinese materia medica resources].

PubMed

Cheng, Gong; Huang, Lu-qi; Xue, Da-yuan; Zhang, Xiao-bo

2014-12-01

The survey of traditional knowledge related to Chinese materia medica resources is the important component and one of the innovative aspects of the fourth national survey of the Chinese materia medica resources. China has rich traditional knowledge of traditional Chinese medicine (TCM) and the comprehensive investigation of TCM traditional knowledge aims to promote conservation and sustainable use of Chinese materia medica resources. Building upon the field work of pilot investigations, this paper introduces the essential procedures and key methods for conducting the survey of traditional knowledge related to Chinese materia medica resources. The essential procedures are as follows. First is the preparation phrase. It is important to review all relevant literature and provide training to the survey teams so that they have clear understanding of the concept of traditional knowledge and master key survey methods. Second is the field investigation phrase. When conducting field investigations, survey teams should identify the traditional knowledge holders by using the 'snowball method', record the traditional knowledge after obtaining prior informed concerned from the traditional knowledge holders. Researchers should fill out the survey forms provided by the Technical Specification of the Fourth National Survey of Chinese Materia Medica Resources. Researchers should pay particular attention to the scope of traditional knowledge and the method of inheriting the knowledge, which are the key information for traditional knowledge holders and potential users to reach mutual agreed terms to achieve benefit sharing. Third is the data compilation and analysis phrase. Researchers should try to compile and edit the TCM traditional knowledge in accordance with intellectual property rights requirements so that the information collected through the national survey can serve as the basic data for the TCM traditional knowledge database. The key methods of the survey include regional division of Chinese materia medica resources, interview of key information holders and standardization of information.' In particular, using "snowball method" can effectively identify traditional knowledge holder in the targeted regions and ensuring traditional knowledge holders receiving prior informed concerned before sharing the information with researcher to make sure the rights of traditional knowledge holders are protected. Employing right survey methods is not only the key to obtain traditional knowledge related to Chinese materia medica resources, but also the pathway to fulfill the objectives of access and benefit sharing stipulated in Convention on Biological Resources. It will promote the legal protection of TCM traditional knowledge and conservation of TCM intangible, cultural heritage.

Epidemiology and detection as options for control of viral and parasitic foodborne disease.

PubMed Central

Jaykus, L. A.

1997-01-01

Human enteric viruses and protozoal parasites are important causes of emerging food and waterborne disease. Epidemiologic investigation and detection of the agents in clinical, food, and water specimens, which are traditionally used to establish the cause of disease outbreaks, are either cumbersome, expensive, and frequently unavailable or unattempted for the important food and waterborne enteric viruses and protozoa. However, the recent introduction of regulatory testing mandates, alternative testing strategies, and increased epidemiologic surveillance for food and waterborne disease should significantly improve the ability to detect and control these agents. We discuss new methods of investigating foodborne viral and parasitic disease and the future of these methods in recognizing, identifying, and controlling disease agents. PMID:9366607

The effect of Think Pair Share (TPS) using scientific approach on students’ self-confidence and mathematical problem-solving

NASA Astrophysics Data System (ADS)

Rifa’i, A.; Lestari, H. P.

2018-03-01

This study was designed to know the effects of Think Pair Share using Scientific Approach on students' self-confidence and mathematical problem-solving. Quasi-experimental with pre-test post-test non-equivalent group method was used as a basis for design this study. Self-confidence questionnaire and problem-solving test have been used for measurement of the two variables. Two classes of the first grade in religious senior high school (MAN) in Indonesia were randomly selected for this study. Teaching sequence and series from mathematics book at control group in the traditional way and at experiment group has been in TPS using scientific approach learning method. For data analysis regarding students’ problem-solving skill and self-confidence, One-Sample t-Test, Independent Sample t-Test, and Multivariate of Variance (MANOVA) were used. The results showed that (1) TPS using a scientific approach and traditional learning had positive effects (2) TPS using scientific approach learning in comparative with traditional learning had a more significant effect on students’ self-confidence and problem-solving skill.

Adaptive control for solar energy based DC microgrid system development

NASA Astrophysics Data System (ADS)

Zhang, Qinhao

During the upgrading of current electric power grid, it is expected to develop smarter, more robust and more reliable power systems integrated with distributed generations. To realize these objectives, traditional control techniques are no longer effective in either stabilizing systems or delivering optimal and robust performances. Therefore, development of advanced control methods has received increasing attention in power engineering. This work addresses two specific problems in the control of solar panel based microgrid systems. First, a new control scheme is proposed for the microgrid systems to achieve optimal energy conversion ratio in the solar panels. The control system can optimize the efficiency of the maximum power point tracking (MPPT) algorithm by implementing two layers of adaptive control. Such a hierarchical control architecture has greatly improved the system performance, which is validated through both mathematical analysis and computer simulation. Second, in the development of the microgrid transmission system, the issues related to the tele-communication delay and constant power load (CPL)'s negative incremental impedance are investigated. A reference model based method is proposed for pole and zero placements that address the challenges of the time delay and CPL in closed-loop control. The effectiveness of the proposed modeling and control design methods are demonstrated in a simulation testbed. Practical aspects of the proposed methods for general microgrid systems are also discussed.

Examining the impact of the Guided Constructivist teaching method on students' misconceptions about concepts of Newtonian physics

NASA Astrophysics Data System (ADS)

Ibrahim, Hyatt Abdelhaleem

The effect of Guided Constructivism (Interactivity-Based Learning Environment) and Traditional Expository instructional methods on students' misconceptions about concepts of Newtonian Physics was investigated. Four groups of 79 of University of Central Florida students enrolled in Physics 2048 participated in the study. A quasi-experimental design of nonrandomized, nonequivalent control and experimental groups was employed. The experimental group was exposed to the Guided Constructivist teaching method, while the control group was taught using the Traditional Expository teaching approach. The data collection instruments included the Force Concept Inventory Test (FCI), the Mechanics Baseline Test (MBT), and the Maryland Physics Expectation Survey (MPEX). The Guided Constructivist group had significantly higher means than the Traditional Expository group on the criterion variables of: (1) conceptions of Newtonian Physics, (2) achievement in Newtonian Physics, and (3) beliefs about the content of Physics knowledge, beliefs about the role of Mathematics in learning Physics, and overall beliefs about learning/teaching/appropriate roles of learners and teachers/nature of Physics. Further, significant relationships were found between (1) achievement, conceptual structures, beliefs about the content of Physics knowledge, and beliefs about the role of Mathematics in learning Physics; (2) changes in misconceptions about the physical phenomena, and changes in beliefs about the content of Physics knowledge. No statistically significant difference was found between the two teaching methods on achievement of males and females. These findings suggest that differences in conceptual learning due to the nature of the teaching method used exist. Furthermore, greater conceptual learning is fostered when teachers use interactivity-based teaching strategies to train students to link everyday experience in the real physical world to formal school concepts. The moderate effect size and power of the study suggest that the effect may not be subtle, but reliable. Physics teachers can use these results to inform their decisions about structuring learning environment when conceptual learning is important.

Egypt`s first remotely controlled subsea completion -- A Gulf of Suez case history

DOE Office of Scientific and Technical Information (OSTI.GOV)

El Hawary, A.; Hoffman, J.G.

1995-11-01

A case history of the Gulf of Suez Petroleum Company`s (GUPCO) first remotely controlled subsea completion is provided. The first completion was for well GS 373-2, a previously drilled and tested exploration well located in the south portion of the Gulf of Suez. Subsea technology was utilized to economically justify development of this one well marginal field which was discovered in 1978. Traditional methods proved to be too costly for development, therefore application of a low cost subsea tree was utilized to capture the resources. In the Gulf of Suez many fields have been discovered by have not been developedmore » due to low reserves. These marginal projects can have a profound impact on the revenue and shareholder value if any economic method is used to exploit these opportunities. Platform installation was not feasible due to reserve size, hence the well has remained abandoned until recently. Capturing the experience of Amoco in the Gulf of Mexico and in the Dutch North Sea, GUPCO was able to build a low cost subsea system which would allow for the economic development of the marginal fields discovered in the past. This paper presents a summarized look at subsea completion technology. The cost comparison of traditional development methods will be made, given the local cost structure in Egypt. The application of this technology has some limitations and constraints which will be discussed in the paper. Furthermore the actual field installation of Egypt`s first remotely controlled subsea tree will be summarized. Also included is a discussion on simple remote controls,and offshore installation operations.« less

A case of severe refractory chronic urticaria: a novel method for evaluation and treatment.

PubMed

Otto, Hans F; Calabria, Christopher W

2009-01-01

With cholinergic urticaria (ChU), the ultimate diagnosis often depends on the demonstration of characteristic urticaria by appropriate provocation. Several treatment options may be helpful but traditional options (antihistamines, leukotriene inhibitors, and immunosuppressives) may be exhausted by the refractory ChU patient. Here, we describe such a case. Demonstration of immediate hypersensitivity to autologous sweat skin testing (ASwST) may provide a rationale for use of omalizumab (Xolair, Genentech Novartis, South San Francisco, CA). Patients with severe ChU may have difficulty producing sufficient quantities of sweat for ASwST given that the very effort that produces the sample exacerbates ChU. Generation of sweat by iontophoresis with pilocarpine nitrate can be performed at many large medical centers. The procedure is simple, safe, and produces varying amounts of sweat depending on the individual. This sweat can then be used for ASwST. Our patient had a positive ASwST with appropriate positive and negative controls. Our testing methods were validated by negative ASwST, saline control, and positive histamine control in a nonatopic, nonurticarial control patient. By the patient's second injection of omalizumab, her quality of life score was significantly improved, as were her daily medication scores and exercise tolerance. We describe the first case of a patient with severe refractory ChU who had a positive ASwST by a novel collection method who has been successfully treated with omalizumab. We present a novel tool for the evaluation and demonstration of sweat-specific IgE in ChU patients who are unable to provide sweat by more traditional means.

Effectiveness of strategies incorporating training and support of traditional birth attendants on perinatal and maternal mortality: meta-analysis

PubMed Central

Wilson, Amie; Gallos, Ioannis D; Plana, Nieves; Lissauer, David; Khan, Khalid S; Zamora, Javier; MacArthur, Christine

2011-01-01

Objective To assess the effectiveness of strategies incorporating training and support of traditional birth attendants on the outcomes of perinatal, neonatal, and maternal death in developing countries. Design Systematic review with meta-analysis. Data sources Medline, Embase, the Allied and Complementary Medicine database, British Nursing Index, Cochrane Library, Cumulative Index to Nursing and Allied Health Literature, BioMed Central, PsycINFO, Latin American and Caribbean Health Sciences Literature database, African Index Medicus, Web of Science, Reproductive Health Library, and Science Citation Index (from inception to April 2011), without language restrictions. Search terms were “birth attend*”, “traditional midwife”, “lay birth attendant”, “dais”, and “comadronas”. Review methods We selected randomised and non-randomised controlled studies with outcomes of perinatal, neonatal, and maternal mortality. Two independent reviewers undertook data extraction. We pooled relative risks separately for the randomised and non-randomised controlled studies, using a random effects model. Results We identified six cluster randomised controlled trials (n=138 549) and seven non-randomised controlled studies (n=72 225) that investigated strategies incorporating training and support of traditional birth attendants. All six randomised controlled trials found a reduction in adverse perinatal outcomes; our meta-analysis showed significant reductions in perinatal death (relative risk 0.76, 95% confidence interval 0.64 to 0.88, P<0.001; number needed to treat 35, 24 to 70) and neonatal death (0.79, 0.69 to 0.88, P<0.001; 98, 66 to 170). Meta-analysis of the non-randomised studies also showed a significant reduction in perinatal mortality (0.70, 0.57 to 0.84, p<0.001; 48, 32 to 96) and neonatal mortality (0.61, 0.48 to 0.75, P<0.001; 96, 65 to 168). Six studies reported on maternal mortality and our meta-analysis showed a non-significant reduction (three randomised trials, relative risk 0.79, 0.53 to 1.05, P=0.12; three non-randomised studies, 0.80, 0.44 to 1.15, P=0.26). Conclusion Perinatal and neonatal deaths are significantly reduced with strategies incorporating training and support of traditional birth attendants. PMID:22134967

Effectiveness of strategies incorporating training and support of traditional birth attendants on perinatal and maternal mortality: meta-analysis.

PubMed

Wilson, Amie; Gallos, Ioannis D; Plana, Nieves; Lissauer, David; Khan, Khalid S; Zamora, Javier; MacArthur, Christine; Coomarasamy, Arri

2011-12-01

To assess the effectiveness of strategies incorporating training and support of traditional birth attendants on the outcomes of perinatal, neonatal, and maternal death in developing countries. Systematic review with meta-analysis. Medline, Embase, the Allied and Complementary Medicine database, British Nursing Index, Cochrane Library, Cumulative Index to Nursing and Allied Health Literature, BioMed Central, PsycINFO, Latin American and Caribbean Health Sciences Literature database, African Index Medicus, Web of Science, Reproductive Health Library, and Science Citation Index (from inception to April 2011), without language restrictions. Search terms were "birth attend*", "traditional midwife", "lay birth attendant", "dais", and "comadronas". Review methods We selected randomised and non-randomised controlled studies with outcomes of perinatal, neonatal, and maternal mortality. Two independent reviewers undertook data extraction. We pooled relative risks separately for the randomised and non-randomised controlled studies, using a random effects model. We identified six cluster randomised controlled trials (n=138 549) and seven non-randomised controlled studies (n=72 225) that investigated strategies incorporating training and support of traditional birth attendants. All six randomised controlled trials found a reduction in adverse perinatal outcomes; our meta-analysis showed significant reductions in perinatal death (relative risk 0.76, 95% confidence interval 0.64 to 0.88, P<0.001; number needed to treat 35, 24 to 70) and neonatal death (0.79, 0.69 to 0.88, P<0.001; 98, 66 to 170). Meta-analysis of the non-randomised studies also showed a significant reduction in perinatal mortality (0.70, 0.57 to 0.84, p<0.001; 48, 32 to 96) and neonatal mortality (0.61, 0.48 to 0.75, P<0.001; 96, 65 to 168). Six studies reported on maternal mortality and our meta-analysis showed a non-significant reduction (three randomised trials, relative risk 0.79, 0.53 to 1.05, P=0.12; three non-randomised studies, 0.80, 0.44 to 1.15, P=0.26). Perinatal and neonatal deaths are significantly reduced with strategies incorporating training and support of traditional birth attendants.

Neural net controller for inlet pressure control of rocket engine testing

NASA Technical Reports Server (NTRS)

Trevino, Luis C.

1994-01-01

Many dynamic systems operate in select operating regions, each exhibiting characteristic modes of behavior. It is traditional to employ standard adjustable gain proportional-integral-derivative (PID) loops in such systems where no apriori model information is available. However, for controlling inlet pressure for rocket engine testing, problems in fine tuning, disturbance accommodation, and control gains for new profile operating regions (for research and development) are typically encountered. Because of the capability of capturing I/O peculiarities, using NETS, a back propagation trained neural network is specified. For select operating regions, the neural network controller is simulated to be as robust as the PID controller. For a comparative analysis, the higher order moment neural array (HOMNA) method is used to specify a second neural controller by extracting critical exemplars from the I/O data set. Furthermore, using the critical exemplars from the HOMNA method, a third neural controller is developed using NETS back propagation algorithm. All controllers are benchmarked against each other.

On the relationship between wave based control, absolute vibration suppression and input shaping

NASA Astrophysics Data System (ADS)

Peled, I.; O'Connor, W. J.; Halevi, Y.

2013-08-01

The modeling and control of continuous flexible structures is one of the most challenging problems in control theory. This topic gains more interest with the development of slender space structures, light weight aeronautical components or even traditional gears and drive shafts with flexible properties. Several control schemes are based on the traveling wave approach, rather than the more common modal methods. In this work we investigate the relationships between two of these methods. The Absolute Vibration Suppression (AVS) controller, which was developed for infinite dimension systems, is compared to Wave Based Control (WBC) which was designed primarily for lumped systems. The WBC was first adjusted to continuous systems and then the two controllers, whose algorithms seem different, are compared. The investigation shows that for the flexible shaft these two control laws are actually the same. Furthermore, when converted into an equivalent open loop controller they appear as an extension to continuous systems of the Input Shaping (IS) methodology.

The research on regional conservation planning of urban historical and cultural areas based on GIS

NASA Astrophysics Data System (ADS)

Li, Shangli; Xu, Jian; Li, Qian

2017-06-01

With the rapid economic development and the growth of population happening in the urban historical and cultural areas, heritage and historical buildings along with their natural and artificial surrounding environments are suffering constructive destruction. Due to the lack of precise partition of protection region and construction control region in the local cultural relics protection law, traditional regional conservation planning cannot engaged with the urban controllability detailed planning very well. According to the several protection regulations about heritage and historical buildings from latest laws, we choose Baxian Temple area to study on the improvments of traditional regional conservation planning. The technical methods of this study mainly rely on GIS, which can complete the fundamental work of each stage. With the analytic hierarchy process(AHP), the comprehensive architectural value assessments can be calculated according to the investigation results. Based on the calculation results and visual corridor analysis, the precise range of protection region and construction control region can be decided and the specific protection measures can be formulated.

a New Approach for Accuracy Improvement of Pulsed LIDAR Remote Sensing Data

NASA Astrophysics Data System (ADS)

Zhou, G.; Huang, W.; Zhou, X.; He, C.; Li, X.; Huang, Y.; Zhang, L.

2018-05-01

In remote sensing applications, the accuracy of time interval measurement is one of the most important parameters that affect the quality of pulsed lidar data. The traditional time interval measurement technique has the disadvantages of low measurement accuracy, complicated circuit structure and large error. A high-precision time interval data cannot be obtained in these traditional methods. In order to obtain higher quality of remote sensing cloud images based on the time interval measurement, a higher accuracy time interval measurement method is proposed. The method is based on charging the capacitance and sampling the change of capacitor voltage at the same time. Firstly, the approximate model of the capacitance voltage curve in the time of flight of pulse is fitted based on the sampled data. Then, the whole charging time is obtained with the fitting function. In this method, only a high-speed A/D sampler and capacitor are required in a single receiving channel, and the collected data is processed directly in the main control unit. The experimental results show that the proposed method can get error less than 3 ps. Compared with other methods, the proposed method improves the time interval accuracy by at least 20 %.

Simultaneous quantification and splenocyte-proliferating activities of nucleosides and bases in Cervi cornu Pantotrichum

PubMed Central

Zong, Ying; Wang, Yu; Li, Hang; Li, Na; Zhang, Hui; Sun, Jiaming; Niu, Xiaohui; Gao, Xiaochen

2014-01-01

Background: Cervi Cornu Pantotrichum has been a well known traditional Chinese medicine, which is young horn of Cervus Nippon Temminck (Hualurong: HLR). At present, the methods used for the quality control of Cervi Cornu Pantotrichum show low specificity. Objective: To describe a holistic method based on chemical characteristics and splenocyte-proliferating activities to evaluate the quality of HLR. Materials and Methods: The nucleosides and bases from HLR were identified by high performance liquid chromatography electrospray ionization mass spectrometry (HPLC-ESI-MS), and six of them were chosen to be used for simultaneous HPLC quantification according to the results of proliferation of mouse splenocytes in vitro. Results: In this study, eight nucleosides and bases have been identified. In addition, uracil, hypoxanthine, uridine, inosine, guanosine, and adenosine were chosen to be used for simultaneous HPLC quantification. Simultaneous quantification of these six substances was performed on ten groups of HLR under the condition of a TIANHE Kromasil C18 column (5 μm, 4.6 mm × 250 mm i.d.) and a gradient elution of water and acetonitrile. Of the ten groups, HLR displayed the highest total nucleoside contents (TNC, sum of adenosine and uracil, 0.412 mg/g) with the strongest splenocyte-proliferating activities. Conclusion: These results suggest that TNC (such as particularly highly contained adenosine and uracil) in HLR has a certain correlation with the activity of splenocyte-proliferating, and it may be used as a quality control for HLR. This comprehensive method could be applied to other traditional Chinese medicines to ameliorate their quality control. PMID:25422536

Healthcare chains - enabling application and data privacy controls for healthcare information systems.

PubMed

Omran, Esraa; Grandison, Tyrone; Abu Almaati, Shereef

2010-01-01

Healthcare applications that have access control, disclosure management and or privacy enforcement requirements may implement the respective solutions to these issues at the application level or at the database level or in both. Unfortunately, there are technical and non-technical factors that influence what can be done. In this paper we present a flexible, simple and novel approach to seamlessly imbuing current healthcare applications and their supporting infrastructure with security and privacy functionality, while being cognizant of these factors. This approach is called the Chain method. This paper will highlight the smaller design footprint, the increased ease of implementation and use of the Chain method, while demonstrating that it is as powerful and effective as traditional methods.

Massage Therapy in Children with Asthma: A Systematic Review and Meta-Analysis.

PubMed

Wu, Ji; Yang, Xi-Wen; Zhang, Ming

2017-01-01

To systematically evaluate the efficacy of massage, a traditional treatment method of traditional Chinese medicine on children with asthma. Literatures from 5 databases using the date ranging from 1 January, 1990, to 13 December, 2016, were reviewed, which were all randomized controlled trials evaluating the efficacy on children with asthma and effect on lung function mainly by massage therapy. 14 researches with 1299 patients were included in the meta-analysis. Compared with control group, a better efficacy was found in treatment group, which focused on massage therapy. Compared with control group, there was remarkable increase on FEV1 as well as PEF in treatment group. All studies have shown that massage therapy has a significantly positive effect on children with asthma, improves the pulmonary function parameters of large airway, reduces the plasma concentrations of PAF and prostaglandin, and increases the levels of PAF-AH and DP1; therefore, it greatly improves pulmonary function. However, the limited research designs of included studies lead to high risk of bias. More randomized controlled trials with better methodological quality are needed to further confirm the effectiveness of massage.

Vibration isolation and dual-stage actuation pointing system for space precision payloads

NASA Astrophysics Data System (ADS)

Kong, Yongfang; Huang, Hai

2018-02-01

Pointing and stability requirements for future space missions are becoming more and more stringent. This work follows the pointing control method which consists of a traditional spacecraft attitude control system and a payload active pointing loop, further proposing a vibration isolation and dual-stage actuation pointing system for space precision payloads based on a soft Stewart platform. Central to the concept is using the dual-stage actuator instead of the traditional voice coil motor single-stage actuator to improve the payload active pointing capability. Based on a specified payload, the corresponding platform was designed to be installed between the spacecraft bus and the payload. The performance of the proposed system is demonstrated by preliminary closed-loop control investigations in simulations. With the ordinary spacecraft bus, the line-of-sight pointing accuracy can be controlled to below a few milliarcseconds in tip and tilt. Meanwhile, utilizing the voice coil motor with the softening spring in parallel, which is a portion of the dual-stage actuator, the system effectively achieves low-frequency motion transmission and high-frequency vibration isolation along the other four degree-of-freedom directions.

Comparing two methods of education (virtual versus traditional) on learning of Iranian dental students: a post-test only design study

PubMed Central

2014-01-01

Background The importance of using technologies such as e-learning in different disciplines is discussed in the literature. Researchers have measured the effectiveness of e-learning in a number of fields. Considering the lack of research on the effectiveness of online learning in dental education particularly in Iran, the advantages of these learning methods and the positive university atmosphere regarding the use of online learning. This study, therefore, aims to compare the effects of two methods of teaching (virtual versus traditional) on student learning. Methods This post-test only design study approached 40, fifth year dental students of Shiraz University of Medical Sciences. From this group, 35 students agreed to participate. These students were randomly allocated into two groups, experimental (virtual learning) and comparison (traditional learning). To ensure similarity between groups, we compared GPAs of all participants by the Mann–Whitney U test (P > 0.05). The experimental group received a virtual learning environment courseware package specifically designed for this study, whereas the control group received the same module structured in a traditional lecture form. The virtual learning environment consisted of online and offline materials. Two identical valid, reliable post-tests that consisted of 40 multiple choice questions (MCQs) and 4 essay questions were administered immediately (15 min) after the last session and two months later to assess for knowledge retention. Data were analyzed by SPSS version 20. Results A comparison of the mean knowledge score of both groups showed that virtual learning was more effective than traditional learning (effect size = 0.69). Conclusion The newly designed virtual learning package is feasible and will result in more effective learning in comparison with lecture-based training. However further studies are needed to generalize the findings of this study. PMID:24597923

Indianization of psychiatry utilizing Indian mental concepts

PubMed Central

Avasthi, Ajit; Kate, Natasha; Grover, Sandeep

2013-01-01

Most of the psychiatry practice in India is guided by the western concepts of mental health and illness, which have largely ignored the role of religion, family, eastern philosophy, and medicine in understanding and managing the psychiatric disorders. India comprises of diverse cultures, languages, ethnicities, and religious affiliations. However, besides these diversities, there are certain commonalities, which include Hinduism as a religion which is spread across the country, the traditional family system, ancient Indian system of medicine and emphasis on use of traditional methods like Yoga and Meditation for controlling mind. This article discusses as to how mind and mental health are understood from the point of view of Hinduism, Indian traditions and Indian systems of medicine. Further, the article focuses on as to how these Indian concepts can be incorporated in the practice of contemporary psychiatry. PMID:23858244

Beyond the Flipped Classroom: A Highly Interactive Cloud-Classroom (HIC) Embedded into Basic Materials Science Courses

NASA Astrophysics Data System (ADS)

Liou, Wei-Kai; Bhagat, Kaushal Kumar; Chang, Chun-Yen

2016-06-01

The present study compares the highly interactive cloud-classroom (HIC) system with traditional methods of teaching materials science that utilize crystal structure picture or real crystal structure model, in order to examine its learning effectiveness across three dimensions: knowledge, comprehension and application. The aim of this study was to evaluate the (HIC) system, which incorporates augmented reality, virtual reality and cloud-classroom to teach basic materials science courses. The study followed a pretest-posttest quasi-experimental research design. A total of 92 students (aged 19-20 years), in a second-year undergraduate program, participated in this 18-week-long experiment. The students were divided into an experimental group and a control group. The experimental group (36 males and 10 females) was instructed utilizing the HIC system, while the control group (34 males and 12 females) was led through traditional teaching methods. Pretest, posttest, and delayed posttest scores were evaluated by multivariate analysis of covariance. The results indicated that participants in the experimental group who used the HIC system outperformed the control group, in the both posttest and delayed posttest, across three learning dimensions. Based on these results, the HIC system is recommended to be incorporated in formal materials science learning settings.

Does an outcome-based approach to continuing medical education improve physicians' competences in rational prescribing?

PubMed

Esmaily, Hamideh M; Savage, Carl; Vahidi, Rezagoli; Amini, Abolghasem; Dastgiri, Saeed; Hult, Hakan; Dahlgren, Lars Owe; Wahlstrom, Rolf

2009-11-01

Continuing medical education (CME) is compulsory in Iran, and traditionally it is lecture-based, which is mostly not successful. Outcome-based education has been proposed for CME programs. To evaluate the effectiveness of an outcome-based educational intervention with a new approach based on outcomes and aligned teaching methods, on knowledge and skills of general physicians (GPs) working in primary care compared with a concurrent CME program in the field of "Rational prescribing". The method used was cluster randomized controlled design. All GPs working in six cities in one province in Iran were invited to participate. The cities were matched and randomly divided into an intervention arm for education on rational prescribing with an outcome-based approach, and a control arm for a traditional program on the same topic. Knowledge and skills were assessed using a pre- and post-test, including case scenarios. In total, 112 GPs participated. There were significant improvements in knowledge and prescribing skills after the training in the intervention arm as well as in comparison with the changes in the control arm. The overall intervention effect was 26 percentage units. The introduction of an outcome-based approach in CME appears to be effective when creating programs to improve GPs' knowledge and skills.

[Study of blending method for the extracts of herbal plants].

PubMed

Liu, Yongsuo; Cao, Min; Chen, Yuying; Hu, Yuzhu; Wang, Yiming; Luo, Guoan

2006-03-01

The irregularity in herbal plant composition is influenced by multiple factors. As for quality control of traditional Chinese medicine, the most critical challenge is to ensure the dosage content uniformity. This content uniformity can be improved by blending different batches of the extracts of herbal plants. Nonlinear least-squares regression was used to calculate the blending coefficient, which means no great absolute differences allowed for all ingredients. For traditional Chinese medicines, even relatively smaller differences could present to be very important for all the ingredients. The auto-scaling pretreatment was used prior to the calculation of the blending coefficients. The pretreatment buffered the characteristics of individual data for the ingredients in different batches, so an improved auto-scaling pretreatment method was proposed. With the improved auto-scaling pretreatment, the relative. differences decreased after blending different batches of extracts of herbal plants according to the reference samples. And the content uniformity control of the specific ingredients could be achieved by the error control coefficient. In the studies for the extracts of fructus gardeniae, the relative differences of all the ingredients is less than 3% after blending different batches of the extracts. The results showed that nonlinear least-squares regression can be used to calculate the blending coefficient of the herbal plant extracts.

Recent Trends in Salmonella Outbreaks and Emerging Technology for Biocontrol of Salmonella Using Phages in Foods: A Review.

PubMed

Oh, Jun-Hyun; Park, Mi-Kyung

2017-12-28

Salmonella is one of the principal causes of foodborne outbreaks. As traditional control methods have shown less efficacy against emerging Salmonella serotypes or antimicrobialresistant Salmonella , new approaches have been attempted. The use of lytic phages for the biocontrol of Salmonella in the food industry has become an attractive method owing to the many advantages offered by the use of phages as biocontrol agents. Phages are natural alternatives to traditional antimicrobial agents; they have proven effective in the control of bacterial pathogens in the food industry, which has led to the development of different phage products. The treatment with specific phages in the food industry can prevent the decay of products and the spread of bacterial diseases, and ultimately promotes safe environments for animal and plant food production, processing, and handling. After an extensive investigation of the current literature, this review focuses predominantly on the efficacy of phages for the successful control of Salmonella spp. in foods. This review also addresses the current knowledge on the pathogenic characteristics of Salmonella , the prevalence of emerging Salmonella outbreaks, the isolation and characterization of Salmonella -specific phages, the effectiveness of Salmonella -specific phages as biocontrol agents, and the prospective use of Salmonella -specific phages in the food industry.

Distance learning in academic health education.

PubMed

Mattheos, N; Schittek, M; Attström, R; Lyon, H C

2001-05-01

Distance learning is an apparent alternative to traditional methods in education of health care professionals. Non-interactive distance learning, interactive courses and virtual learning environments exist as three different generations in distance learning, each with unique methodologies, strengths and potential. Different methodologies have been recommended for distance learning, varying from a didactic approach to a problem-based learning procedure. Accreditation, teamwork and personal contact between the tutors and the students during a course provided by distance learning are recommended as motivating factors in order to enhance the effectiveness of the learning. Numerous assessment methods for distance learning courses have been proposed. However, few studies report adequate tests for the effectiveness of the distance-learning environment. Available information indicates that distance learning may significantly decrease the cost of academic health education at all levels. Furthermore, such courses can provide education to students and professionals not accessible by traditional methods. Distance learning applications still lack the support of a solid theoretical framework and are only evaluated to a limited extent. Cases reported so far tend to present enthusiastic results, while more carefully-controlled studies suggest a cautious attitude towards distance learning. There is a vital need for research evidence to identify the factors of importance and variables involved in distance learning. The effectiveness of distance learning courses, especially in relation to traditional teaching methods, must therefore be further investigated.

Intelligent tuning method of PID parameters based on iterative learning control for atomic force microscopy.

PubMed

Liu, Hui; Li, Yingzi; Zhang, Yingxu; Chen, Yifu; Song, Zihang; Wang, Zhenyu; Zhang, Suoxin; Qian, Jianqiang

2018-01-01

Proportional-integral-derivative (PID) parameters play a vital role in the imaging process of an atomic force microscope (AFM). Traditional parameter tuning methods require a lot of manpower and it is difficult to set PID parameters in unattended working environments. In this manuscript, an intelligent tuning method of PID parameters based on iterative learning control is proposed to self-adjust PID parameters of the AFM according to the sample topography. This method gets enough information about the output signals of PID controller and tracking error, which will be used to calculate the proper PID parameters, by repeated line scanning until convergence before normal scanning to learn the topography. Subsequently, the appropriate PID parameters are obtained by fitting method and then applied to the normal scanning process. The feasibility of the method is demonstrated by the convergence analysis. Simulations and experimental results indicate that the proposed method can intelligently tune PID parameters of the AFM for imaging different topographies and thus achieve good tracking performance. Copyright © 2017 Elsevier Ltd. All rights reserved.

The development of a closed-loop flight controller with panel method integration for gust alleviation using biomimetic feathers on aircraft wings

NASA Astrophysics Data System (ADS)

Blower, Christopher J.; Lee, Woody; Wickenheiser, Adam M.

2012-04-01

This paper presents the development of a biomimetic closed-loop flight controller that integrates gust alleviation and flight control into a single distributed system. Modern flight controllers predominantly rely on and respond to perturbations in the global states, resulting in rotation or displacement of the entire aircraft prior to the response. This bio-inspired gust alleviation system (GAS) employs active deflection of electromechanical feathers that react to changes in the airflow, i.e. the local states. The GAS design is a skeletal wing structure with a network of featherlike panels installed on the wing's surfaces, creating the airfoil profile and replacing the trailing-edge flaps. In this study, a dynamic model of the GAS-integrated wing is simulated to compute gust-induced disturbances. The system implements continuous adjustment to flap orientation to perform corrective responses to inbound gusts. MATLAB simulations, using a closed-loop LQR integrated with a 2D adaptive panel method, allow analysis of the morphing structure's aerodynamic data. Non-linear and linear dynamic models of the GAS are compared to a traditional single control surface baseline wing. The feedback loops synthesized rely on inertial changes in the global states; however, variations in number and location of feather actuation are compared. The bio-inspired system's distributed control effort allows the flight controller to interchange between the single and dual trailing edge flap profiles, thereby offering an improved efficiency to gust response in comparison to the traditional wing configuration. The introduction of aero-braking during continuous gusting flows offers a 25% reduction in x-velocity deviation; other flight parameters can be reduced in magnitude and deviation through control weighting optimization. Consequently, the GAS demonstrates enhancements to maneuverability and stability in turbulent intensive environments.

[The possibility for using the phenomenon of polarized light interference in treating amblyopia].

PubMed

Abramov, V G; Vakurina, A E; Kashchenko, T P; Pargina, N M

1996-01-01

A new method for treating amblyopia is proposed, making use of the phenomenon of polarized light interference. It helps act simultaneously on the brightness, contrast frequency, and color sensitivity in response to patterns. The method was used in the treatment of 36 children. In group 1 (n = 20) it was combined with the traditional methods. Such treatment was more effective than in controls treated routinely. Group 2 consisted of 16 children in whom previous therapy was of no avail. Visual function was improved in 7 of them.

Evaluation of eLearning for the teaching of undergraduate ophthalmology at medical school: a randomised controlled crossover study.

PubMed

Petrarca, Caroline A; Warner, Julia; Simpson, Andrew; Petrarca, Robert; Douiri, Abdel; Byrne, David; Jackson, Timothy L

2018-05-25

To compare ophthalmology teaching delivered by eLearning with traditional lectures, in terms of undergraduate performance and satisfaction. Randomised controlled crossover study at King's College London Medical School with 245 third year medical students. The ophthalmology syllabus was divided into ten topics. Five topics were randomised to be taught by traditional lectures and five by electronic learning (eLearning). For the second rotation of students the topics were crossed over, so that those topics taught by traditional lectures were taught by eLearning and vice versa. At the end of each rotation the students sat an optional online mock examination containing 100 questions (ten on each topic). Students' examination performance was compared between the two teaching methods. Student satisfaction was assessed using an online satisfaction survey. Outcome measures were the mean percentage of correct answers across all ten topics, student satisfaction and self-assessed knowledge. The mean examination score for questions taught by eLearning was 58% (95% CI, 55.7-59.6), versus 55% (95% CI 53.1-56.8) for traditional lectures (P = 0.047). Across all topics students were more satisfied with eLearning than traditional lectures, with 87% (95% CI 84.5-88.4) rating eLearning as 'excellent' or 'good' versus 65% (95% CI 62.0-67.4) for lectures (p < 0.0001). Overall 180 (75.6%) preferred eLearning compared to traditional lectures, with 166 (69.7%) rating eLearning 'much better' or 'better,' 61 (25.6%) 'neutral' and 11 (4.6%) 'worse' or 'much worse.' Student satisfaction and examination performance are both enhanced by ophthalmology eLearning. Similar eLearning modules may be suitable for other specialties and postgraduate learning.

Efficacy and safety of acupuncture therapy for nerve deafness: a meta-analysis of randomized controlled trials.

PubMed

Jiang, Yuebo; Shi, Xian; Tang, Yan

2015-01-01

Acupuncture is one of the important parts of therapeutic methods in traditional Chinese medicine, and has been widely used for the treatment of nerve deafness in recent years. The current study was to evaluate the efficacy and safety of acupuncture therapy for nerve deafness compared with conventional medicine therapy. PubMed, the Chinese National Knowledge Infrastructure Database, the Chinese Science and Technology Periodical Database, the Chinese Biomedical Database, the Wanfang Database were searched for articles published to identify randomized controlled trials evaluating efficacy and side effects between acupuncture and conventional medicine therapies up to 2013/06. A total of 12 studies, including 527 patients assessed the efficacy and safety of acupuncture therapy for nerve deafness. Overall, the efficacy of acupuncture was significantly better than that of the conventional western medication (RR: 1.54, 95% CI: 1.36-1.74) or traditional Chinese medicines (RR: 1.51, 95% CI: 1.24-1.84), and the efficacy of acupuncture in combination with conventional western medication or traditional Chinese medicine was better than that of the conventional western medication alone (RR: 1.51, 95% CI: 1.29-1.77) or traditional Chinese medicine alone (RR: 1.59, 95% CI: 1.30-1.95). Based on the comparison of number of deafness patients who were completely cured, the efficacy of acupuncture in combination with traditional Chinese medicines was better than that of traditional Chinese medicine alone (RR: 4.62, 95% CI: 1.38-15.47). Acupuncture therapy can significantly improve the hearing of patients with nerve deafness, and the efficacy of acupuncture in combination with medication is superior to medication alone.

Comparison of ultrasonic shears and traditional suture ligature for vaginal hysterectomy: randomized controlled trial.

PubMed

Fitz-Gerald, Alison Louise; Tan, Jason; Chan, Kok-Weng; Polyakov, Alex; Edwards, Geoff N; Najjar, Haider; Tsaltas, Jim; Vollenhoven, Beverley

2013-01-01

To compare operating time, intraoperative blood loss, postoperative analgesia, and length of hospital stay using ultrasonic shears vs traditional suture ligature in vaginal hysterectomy. Randomized controlled trial (Canadian Task Force classification I). Gynecology units within a single health network, university hospital. Forty women requiring vaginal hysterectomy because of benign disease. Vaginal hysterectomy performed using either ultrasonically activated shears (USS) or traditional suture ligatures. Twenty-one patients were randomized to the USS arm, and 19 patients to the traditional suture ligature arm. Patient characteristics were comparable. Mean (SD) hysterectomy time and was similar in both the USS and traditional arms, 28.66 (4.0) minutes vs 32.37 (3.18) minutes (p = .47), as was total operating time, 97.38 (8.9) minutes vs 91.63 (7.69) minutes (p = .63). Operative blood loss was significantly decreased in the USS group: 62.63 (12.46) mL vs 136.05 (21.54) mL (p = .006). There was, however, no significant change in hemoglobin concentration between the 2 groups: 19.53 (1.79) g/L vs -16.72 (2.5) g/L. There was no significant difference in mean oxycodone use: 9.29 (2.66) mg vs 8.06 (3.19) mg (p = .77). Length of hospital stay was similar in both groups: 58.98 (3.27) hours vs 60.05 (6.48) hours (p = .88). There was no significant difference in overall complication rates between the groups. Although the Harmonic scalpel system, compared with the traditional suture ligation method, seems to be a safe alternative for securing the pedicles in vaginal hysterectomy, it offers no benefit insofar as operative time, reduction in clinically significant blood loss, and analgesic requirements. Copyright © 2013 AAGL. Published by Elsevier Inc. All rights reserved.

Measuring strategic control in implicit learning: how and why?

PubMed

Norman, Elisabeth

2015-01-01

Several methods have been developed for measuring the extent to which implicitly learned knowledge can be applied in a strategic, flexible manner. Examples include generation exclusion tasks in Serial Reaction Time (SRT) learning (Goschke, 1998; Destrebecqz and Cleeremans, 2001) and 2-grammar classification tasks in Artificial Grammar Learning (AGL; Dienes et al., 1995; Norman et al., 2011). Strategic control has traditionally been used as a criterion for determining whether acquired knowledge is conscious or unconscious, or which properties of knowledge are consciously available. In this paper I first summarize existing methods that have been developed for measuring strategic control in the SRT and AGL tasks. I then address some methodological and theoretical questions. Methodological questions concern choice of task, whether the measurement reflects inhibitory control or task switching, and whether or not strategic control should be measured on a trial-by-trial basis. Theoretical questions concern the rationale for including measurement of strategic control, what form of knowledge is strategically controlled, and how strategic control can be combined with subjective awareness measures.

Measuring strategic control in implicit learning: how and why?

PubMed Central

Norman, Elisabeth

2015-01-01

Several methods have been developed for measuring the extent to which implicitly learned knowledge can be applied in a strategic, flexible manner. Examples include generation exclusion tasks in Serial Reaction Time (SRT) learning (Goschke, 1998; Destrebecqz and Cleeremans, 2001) and 2-grammar classification tasks in Artificial Grammar Learning (AGL; Dienes et al., 1995; Norman et al., 2011). Strategic control has traditionally been used as a criterion for determining whether acquired knowledge is conscious or unconscious, or which properties of knowledge are consciously available. In this paper I first summarize existing methods that have been developed for measuring strategic control in the SRT and AGL tasks. I then address some methodological and theoretical questions. Methodological questions concern choice of task, whether the measurement reflects inhibitory control or task switching, and whether or not strategic control should be measured on a trial-by-trial basis. Theoretical questions concern the rationale for including measurement of strategic control, what form of knowledge is strategically controlled, and how strategic control can be combined with subjective awareness measures. PMID:26441809

Adaptive training of cortical feature maps for a robot sensorimotor controller.

PubMed

Adams, Samantha V; Wennekers, Thomas; Denham, Sue; Culverhouse, Phil F

2013-08-01

This work investigates self-organising cortical feature maps (SOFMs) based upon the Kohonen Self-Organising Map (SOM) but implemented with spiking neural networks. In future work, the feature maps are intended as the basis for a sensorimotor controller for an autonomous humanoid robot. Traditional SOM methods require some modifications to be useful for autonomous robotic applications. Ideally the map training process should be self-regulating and not require predefined training files or the usual SOM parameter reduction schedules. It would also be desirable if the organised map had some flexibility to accommodate new information whilst preserving previous learnt patterns. Here methods are described which have been used to develop a cortical motor map training system which goes some way towards addressing these issues. The work is presented under the general term 'Adaptive Plasticity' and the main contribution is the development of a 'plasticity resource' (PR) which is modelled as a global parameter which expresses the rate of map development and is related directly to learning on the afferent (input) connections. The PR is used to control map training in place of a traditional learning rate parameter. In conjunction with the PR, random generation of inputs from a set of exemplar patterns is used rather than predefined datasets and enables maps to be trained without deciding in advance how much data is required. An added benefit of the PR is that, unlike a traditional learning rate, it can increase as well as decrease in response to the demands of the input and so allows the map to accommodate new information when the inputs are changed during training. Copyright © 2013 Elsevier Ltd. All rights reserved.

Genetic Adaptive Control for PZT Actuators

NASA Technical Reports Server (NTRS)

Kim, Jeongwook; Stover, Shelley K.; Madisetti, Vijay K.

1995-01-01

A piezoelectric transducer (PZT) is capable of providing linear motion if controlled correctly and could provide a replacement for traditional heavy and large servo systems using motors. This paper focuses on a genetic model reference adaptive control technique (GMRAC) for a PZT which is moving a mirror where the goal is to keep the mirror velocity constant. Genetic Algorithms (GAs) are an integral part of the GMRAC technique acting as the search engine for an optimal PID controller. Two methods are suggested to control the actuator in this research. The first one is to change the PID parameters and the other is to add an additional reference input in the system. The simulation results of these two methods are compared. Simulated Annealing (SA) is also used to solve the problem. Simulation results of GAs and SA are compared after simulation. GAs show the best result according to the simulation results. The entire model is designed using the Mathworks' Simulink tool.

Theory of mind: mechanisms, methods, and new directions

PubMed Central

Byom, Lindsey J.; Mutlu, Bilge

2013-01-01

Theory of Mind (ToM) has received significant research attention. Traditional ToM research has provided important understanding of how humans reason about mental states by utilizing shared world knowledge, social cues, and the interpretation of actions; however, many current behavioral paradigms are limited to static, “third-person” protocols. Emerging experimental approaches such as cognitive simulation and simulated social interaction offer opportunities to investigate ToM in interactive, “first-person” and “second-person” scenarios while affording greater experimental control. The advantages and limitations of traditional and emerging ToM methodologies are discussed with the intent of advancing the understanding of ToM in socially mediated situations. PMID:23964218

Internationalization of traditional Chinese medicine: current international market, internationalization challenges and prospective suggestions.

PubMed

Lin, Annie Xianghong; Chan, Ging; Hu, Yuanjia; Ouyang, Defang; Ung, Carolina Oi Lam; Shi, Luwen; Hu, Hao

2018-01-01

Through reviewing the current international market for traditional Chinese medicine (TCM), this paper identified the internationalization challenges for TCM, including unclear therapeutic material basis and mechanism, difficulty of quality control, low preparation level, registration/policy barriers, and shortage of intellectual property. To deal with these challenges, suggestions were given including: (1) product innovation of TCM (study the TCM by using the methods and means of western medicine; innovate the basic theory of TCM; develop TCM health product); (2) standard innovation of TCM; (3) building big data platform of Chinese medicine (big data platform of TCM preparation; big data platform on the quality of TCM).

The use of whole genome sequencing in the investigation of a nosocomial influenza virus outbreak.

PubMed

Houlihan, Catherine; Frampton, Dan; Ferns, R Bridget; Raffle, Jade; Grant, Paul; Reidy, Myriam; Hail, Leila; Thomson, Kirsty; Mattes, Frank; Kozlakidis, Zisis; Pillay, Deenan; Hayward, Andrew; Nastouli, Eleni

2018-06-05

Traditional epidemiological investigation of nosocomial transmission of influenza involves the identification of patients who have the same influenza virus type and who have overlapped in time and place. This method may miss-identify transmission where it has not occurred or miss transmission when it has. We applied influenza virus whole genome sequencing (WGS) to an outbreak of influenza A in a haematology/oncology ward and identified two separate introductions; one which resulted in 5 additional infections and 79 bed-days lost. Results from WGS are becoming rapidly available and may supplement traditional infection control procedures in the investigation and management of nosocomial outbreaks.

Review: magnetically assisted resistance spot welding

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Y. B.; Li, D. L.; Lin, Z. Q.

2016-02-25

Currently, the use of advanced high strength steels (AHSSs) is the most cost effective means of reducing vehicle body weight and maintaining structural integrity at the same time. However, AHSSs present a big challenge to the traditional resistance spot welding (RSW) widely applied in automotive industries because the rapid heating and cooling procedures during RSW produce hardened weld microstructures, which lower the ductility and fatigue properties of welded joints and raise the probability of interfacial failure under external loads. Changing process parameters or post-weld heat treatment may reduce the weld brittleness, but those traditional quality control methods also increase energymore » consumption and prolong cycle time. In recent years, a magnetically assisted RSW (MA-RSW) method was proposed, in which an externally applied magnetic field would interact with the conduction current to produce a Lorentz force that would affect weld nugget formation. This paper is a review of an experimental MA-RSW platform, the mode of the external magnetic field and the mechanism that controls nugget shape, weld microstructures and joint performance. In conclusion, the advantages of the MA-RSW method in improving the weldability of AHSSs are given, a recent application of the MA-RSW process to light metals is described and the outlook for the MA-RSW process is presented.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Britten, J

WET-ETCH FIGURING (WEF) is an automated method of precisely figuring optical materials by the controlled application of aqueous etchant solution. This technology uses surface-tension-gradient-driven flow to confine and stabilize a wetted zone of an etchant solution or other aqueous processing fluid on the surface of an object. This wetted zone can be translated on the surface in a computer-controlled fashion for precise spatial control of the surface reactions occurring (e.g. chemical etching). WEF is particularly suitable for figuring very thin optical materials because it applies no thermal or mechanical stress to the material. Also, because the process is stress-free themore » workpiece can be monitored during figuring using interferometric metrology, and the measurements obtained can be used to control the figuring process in real-time--something that cannot be done with traditional figuring methods.« less

Improving power and robustness for detecting genetic association with extreme-value sampling design.

PubMed

Chen, Hua Yun; Li, Mingyao

2011-12-01

Extreme-value sampling design that samples subjects with extremely large or small quantitative trait values is commonly used in genetic association studies. Samples in such designs are often treated as "cases" and "controls" and analyzed using logistic regression. Such a case-control analysis ignores the potential dose-response relationship between the quantitative trait and the underlying trait locus and thus may lead to loss of power in detecting genetic association. An alternative approach to analyzing such data is to model the dose-response relationship by a linear regression model. However, parameter estimation from this model can be biased, which may lead to inflated type I errors. We propose a robust and efficient approach that takes into consideration of both the biased sampling design and the potential dose-response relationship. Extensive simulations demonstrate that the proposed method is more powerful than the traditional logistic regression analysis and is more robust than the linear regression analysis. We applied our method to the analysis of a candidate gene association study on high-density lipoprotein cholesterol (HDL-C) which includes study subjects with extremely high or low HDL-C levels. Using our method, we identified several SNPs showing a stronger evidence of association with HDL-C than the traditional case-control logistic regression analysis. Our results suggest that it is important to appropriately model the quantitative traits and to adjust for the biased sampling when dose-response relationship exists in extreme-value sampling designs. © 2011 Wiley Periodicals, Inc.

Clinical evidence of traditional vs fast track recovery methodologies after total arthroplasty for osteoarthritic knee treatment. A retrospective observational study

PubMed Central

Castorina, Sergio; Guglielmino, Claudia; Castrogiovanni, Paola; Szychlinska, Marta Anna; Ioppolo, Francesco; Massimino, Paolo; Leonardi, Pietro; Maci, Christian; Iannuzzi, Maurizio; Di Giunta, Angelo; Musumeci, Giuseppe

2017-01-01

Summary Background During the last years, programs to enhance postoperative recovery and decrease morbidity after total knee arthroplasty, have been developed across a variety of surgical procedures and referred to as “Fast-Track Surgery”. In this study we aimed to find some answers in the management of osteoarthritic patients subjected to total knee arthroplasty, by using the Fast-Track methodology. To this purpose we evaluated parameters such as early mobilization of patients, better pain management, bleeding, possible complications, reduced hospitalization time, an overall improved recovery and patient satisfaction. Methods 132 patients were selected, of which, 95 treated with “Fast Track” method and 37 treated with traditional method (control group). All the patients were hospitalized and underwent the same rehabilitation program for the first three days after surgery. Results In both groups, the parameters of pain and deformity demonstrated the most rapid improvement, while those of function and movement were normalized as gradual and progressive improvement over the next 2 months. The different functional test used (Barthel, MRC, VAS) showed that the mean values were significantly greater in Fast Track group when compared to the control. Conclusion The results of the study confirm that the application of the Fast Track protocol in orthopaedics after total knee replacement results in rapid post-surgery recovery. Level of evidence IV. Case series, low-quality cohort or case-control studies. PMID:29387645

Medical students’ attitudes and perspectives regarding novel computer-based practical spot tests compared to traditional practical spot tests

PubMed Central

Wijerathne, Buddhika; Rathnayake, Geetha

2013-01-01

Background Most universities currently practice traditional practical spot tests to evaluate students. However, traditional methods have several disadvantages. Computer-based examination techniques are becoming more popular among medical educators worldwide. Therefore incorporating the computer interface in practical spot testing is a novel concept that may minimize the shortcomings of traditional methods. Assessing students’ attitudes and perspectives is vital in understanding how students perceive the novel method. Methods One hundred and sixty medical students were randomly allocated to either a computer-based spot test (n=80) or a traditional spot test (n=80). The students rated their attitudes and perspectives regarding the spot test method soon after the test. The results were described comparatively. Results Students had higher positive attitudes towards the computer-based practical spot test compared to the traditional spot test. Their recommendations to introduce the novel practical spot test method for future exams and to other universities were statistically significantly higher. Conclusions The computer-based practical spot test is viewed as more acceptable to students than the traditional spot test. PMID:26451213

Kinematic real-time feedback is more effective than traditional teaching method in learning ankle joint mobilisation: a randomised controlled trial.

PubMed

González-Sánchez, Manuel; Ruiz-Muñoz, Maria; Ávila-Bolívar, Ana Belén; Cuesta-Vargas, Antonio I

2016-10-06

To analyse the effect of real-time kinematic feedback (KRTF) when learning two ankle joint mobilisation techniques comparing the results with the traditional teaching method. Double-blind randomized trial. Faculty of Health Sciences. undergraduate students with no experience in manual therapy. Each student practised intensely for 90 min (45 min for each mobilisation) according to the random methodology assigned (G1: traditional method group and G2: KRTF group). G1: an expert professor supervising the student's practice, the professorstudent ratio was 1:8. G2: placed in front of a station where, while they performed the manoeuvre, they received a KRTF on a laptop. total time of mobilisation, time to reach maximum amplitude, maximum angular displacement in the three axes, maximum and average velocity to reach the maximum angular displacement, average velocity during the mobilisation. Among the pre-post intervention measurements, there were significant differences within the two groups for all outcome variables, however, G2 (KRTF) achieved significantly greater improvements in kinematic parameters for the two mobilisations (significant increase in displacement, velocity and significant reduction in the mobilisations runtime) than G1. Ankle plantar flexion: G1's measurement stability (post-intervention) ranged between 0.491 and 0.687, while G2's measurement stability ranged between 0.899 and 0.984. Ankle dorsal flexion mobilisation: G1 the measurement stability (post-intervention) ranged from 0.543 and 0.684 while G2 ranged between 0.899 and 0.974. KRTF was proven to be more effective tool than traditional teaching method in the teaching - learning process of two joint mobilisation techniques. NCT02504710.

A low-complexity attitude control method for large-angle agile maneuvers of a spacecraft with control moment gyros

NASA Astrophysics Data System (ADS)

Kawajiri, Shota; Matunaga, Saburo

2017-10-01

This study examines a low-complexity control method that satisfies mechanical constraints by using control moment gyros for an agile maneuver. The method is designed based on the fact that a simple rotation around an Euler's principal axis corresponds to a well-approximated solution of a time-optimal rest-to-rest maneuver. With respect to an agile large-angle maneuver using CMGs, it is suggested that there exists a coasting period in which all gimbal angles are constant, and a constant body angular velocity is almost along the Euler's principal axis. The gimbals are driven such that the coasting period is generated in the proposed method. This allows the problem to be converted into obtaining only a coasting time and gimbal angles such that their combination maximizes body angular velocity along the rotational axis of the maneuver. The effectiveness of the proposed method is demonstrated by using numerical simulations. The results indicate that the proposed method shortens the settling time by 20-70% when compared to that of a traditional feedback method. Additionally, a comparison with an existing path planning method shows that the proposed method achieves a low computational complexity (that is approximately 150 times faster) and a certain level of shortness in the settling time.

The Arrangement of Students' Extracurricular Piano Practice Process with the Asynchronous Distance Piano Teaching Method

ERIC Educational Resources Information Center

Karahan, Ahmet Suat

2015-01-01

That the students do their extracurricular piano practices in the direction of the teacher's warnings is a key factor in achieving success in the teaching-learning process. However, the teachers cannot adequately control the students' extracurricular practices in the process of traditional piano education. Under the influence of this lack of…

Children as Innovators in Action--A Study of Microcontrollers in Finnish Comprehensive Schools

ERIC Educational Resources Information Center

Järvinen, Esa-Matti; Karsikas, Arto; Hintikka, Jouni

2007-01-01

In authoritative teaching methods, whereby the teacher controls the social interaction and other classroom activities, the actions of many children are often in response to what they perceive to be the teacher's expectations and the requirements of traditional school evaluation practices, such as examinations and tests. In this kind of school…

Bereaved Adults with Intellectual Disabilities: A Combined Randomized Controlled Trial and Qualitative Study of Two Community-Based Interventions

ERIC Educational Resources Information Center

Dowling, S.; Hubert, J.; White, S.; Hollins, S.

2006-01-01

Background: Bereaved adults with intellectual disabilities are known to experience prolonged and atypical grief which is often unrecognized. The aim of this project was to find an effective way to improve mental health and behavioural outcomes. Methods: Subjects were randomized to two different therapeutic interventions: traditional counselling by…

Virtual Project Management: Examining the Roles and Functions of Online Instructors in Creating Learning Applications with Value

ERIC Educational Resources Information Center

Barrett, Bob

2012-01-01

While many students and instructors are transitioning from the brick-and-mortar classrooms to virtual classrooms, labs, and simulations, this requires a higher-level of expertise, control, and perseverance by the instructor. Traditional methods of teaching, leading, managing, and organizing learn activities has changed in terms of the virtual…

R&D 100, 2016: Stress-Induced Fabrication

ScienceCinema

Fan, Hongyou; Brennan, Tom; Wise, Jack; Liu, Sheng; Hickman, Randy

2018-06-13

Stress-induced fabrication (SIF) uses compressive mechanical stress to create new nanomaterials with lower production costs and enhanced materials performance compared to traditional fabrication routes. Simple, innovative, and with more degrees of freedom than current chemical synthesis methods, SIF uses physical force instead of chemistry applied to form new nanomaterials with precisely controlled structure and tunable properties.

Verification of Cold Working and Interference Levels at Fastener Holes

DTIC Science & Technology

2009-02-01

of the Residual Stress Field on the Fatigue Coupons ........................................ 32 3.3.3 Fractography of Fatigue Test Coupons...predictions to fatigue experiment results (none of the literature we reviewed described fractography of cracks propagating through residual stress...ensures continued safety, readiness, and controlled maintenance costs. These methods augment and enhance traditional safe-life and damage tolerance

Evaluating Listening and Speaking Skills in a Mobile Game-Based Learning Environment with Situational Contexts

ERIC Educational Resources Information Center

Hwang, Wu-Yuin; Shih, Timothy K.; Ma, Zhao-Heng; Shadiev, Rustam; Chen, Shu-Yu

2016-01-01

Game-based learning activities that facilitate students' listening and speaking skills were designed in this study. To participate in learning activities, students in the control group used traditional methods, while students in the experimental group used a mobile system. In our study, we looked into the feasibility of mobile game-based learning…

R&D 100, 2016: Stress-Induced Fabrication

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fan, Hongyou; Brennan, Tom; Wise, Jack

Stress-induced fabrication (SIF) uses compressive mechanical stress to create new nanomaterials with lower production costs and enhanced materials performance compared to traditional fabrication routes. Simple, innovative, and with more degrees of freedom than current chemical synthesis methods, SIF uses physical force instead of chemistry applied to form new nanomaterials with precisely controlled structure and tunable properties.

Risk Assessment Using the Three Dimensions of Probability (Likelihood), Severity, and Level of Control

NASA Technical Reports Server (NTRS)

Watson, Clifford

2010-01-01

Traditional hazard analysis techniques utilize a two-dimensional representation of the results determined by relative likelihood and severity of the residual risk. These matrices present a quick-look at the Likelihood (Y-axis) and Severity (X-axis) of the probable outcome of a hazardous event. A three-dimensional method, described herein, utilizes the traditional X and Y axes, while adding a new, third dimension, shown as the Z-axis, and referred to as the Level of Control. The elements of the Z-axis are modifications of the Hazard Elimination and Control steps (also known as the Hazard Reduction Precedence Sequence). These steps are: 1. Eliminate risk through design. 2. Substitute less risky materials for more hazardous materials. 3. Install safety devices. 4. Install caution and warning devices. 5. Develop administrative controls (to include special procedures and training.) 6. Provide protective clothing and equipment. When added to the twodimensional models, the level of control adds a visual representation of the risk associated with the hazardous condition, creating a tall-pole for the least-well-controlled failure while establishing the relative likelihood and severity of all causes and effects for an identified hazard. Computer modeling of the analytical results, using spreadsheets and threedimensional charting gives a visual confirmation of the relationship between causes and their controls

Risk Assessment Using the Three Dimensions of Probability (Likelihood), Severity, and Level of Control

NASA Technical Reports Server (NTRS)

Watson, Clifford C.

2011-01-01

Traditional hazard analysis techniques utilize a two-dimensional representation of the results determined by relative likelihood and severity of the residual risk. These matrices present a quick-look at the Likelihood (Y-axis) and Severity (X-axis) of the probable outcome of a hazardous event. A three-dimensional method, described herein, utilizes the traditional X and Y axes, while adding a new, third dimension, shown as the Z-axis, and referred to as the Level of Control. The elements of the Z-axis are modifications of the Hazard Elimination and Control steps (also known as the Hazard Reduction Precedence Sequence). These steps are: 1. Eliminate risk through design. 2. Substitute less risky materials for more hazardous materials. 3. Install safety devices. 4. Install caution and warning devices. 5. Develop administrative controls (to include special procedures and training.) 6. Provide protective clothing and equipment. When added to the two-dimensional models, the level of control adds a visual representation of the risk associated with the hazardous condition, creating a tall-pole for the least-well-controlled failure while establishing the relative likelihood and severity of all causes and effects for an identified hazard. Computer modeling of the analytical results, using spreadsheets and three-dimensional charting gives a visual confirmation of the relationship between causes and their controls.

Risk Presentation Using the Three Dimensions of Likelihood, Severity, and Level of Control

NASA Technical Reports Server (NTRS)

Watson, Clifford

2010-01-01

Traditional hazard analysis techniques utilize a two-dimensional representation of the results determined by relative likelihood and severity of the residual risk. These matrices present a quick-look at the Likelihood (Y-axis) and Severity (X-axis) of the probable outcome of a hazardous event. A three-dimensional method, described herein, utilizes the traditional X and Y axes, while adding a new, third dimension, shown as the Z-axis, and referred to as the Level of Control. The elements of the Z-axis are modifications of the Hazard Elimination and Control steps (also known as the Hazard Reduction Precedence Sequence). These steps are: 1. Eliminate risk through design. 2. Substitute less risky materials for more hazardous materials. 3. Install safety devices. 4. Install caution and warning devices. 5. Develop administrative controls (to include special procedures and training.) 6. Provide protective clothing and equipment. When added to the two-dimensional models, the level of control adds a visual representation of the risk associated with the hazardous condition, creating a tall-pole for the leastwell-controlled failure while establishing the relative likelihood and severity of all causes and effects for an identified hazard. Computer modeling of the analytical results, using spreadsheets and three-dimensional charting gives a visual confirmation of the relationship between causes and their controls.

Evaluation of the temporal structure of postural sway fluctuations based on a comprehensive set of analysis tools

NASA Astrophysics Data System (ADS)

Kirchner, M.; Schubert, P.; Schmidtbleicher, D.; Haas, C. T.

2012-10-01

The analysis of postural control has a long history. Traditionally, the amount of body sway is solely used as an index of postural stability. Although this leads to some extent to an effective evaluation of balance performance, the control mechanisms involved have not yet been fully understood. The concept of nonlinear dynamics suggests that variability in the motor output is not randomness but structure, providing the stimulus to reveal the functionality of postural sway. The present work evaluates sway dynamics by means of COP excursions in a quiet standing task versus a dual-task condition in three different test times (30, 60, 300 s). Besides the application of traditional methods-which estimate the overall size of sway-the temporal pattern of body sway was quantified via wavelet transform, multiscale entropy and fractal analysis. We found higher sensitivity of the structural parameters to modulations of postural control strategies and partly an improved evaluation of sway dynamics in longer recordings. It could be shown that postural control modifications take place on different timescales corresponding to the interplay of the sensory systems. A continued application of nonlinear analysis can help to better understand postural control mechanisms.

Mingus Discontinuous Multiphysics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pat Notz, Dan Turner

Mingus provides hybrid coupled local/non-local mechanics analysis capabilities that extend several traditional methods to applications with inherent discontinuities. Its primary features include adaptations of solid mechanics, fluid dynamics and digital image correlation that naturally accommodate dijointed data or irregular solution fields by assimilating a variety of discretizations (such as control volume finite elements, peridynamics and meshless control point clouds). The goal of this software is to provide an analysis framework form multiphysics engineering problems with an integrated image correlation capability that can be used for experimental validation and model

Developing a multipoint titration method with a variable dose implementation for anaerobic digestion monitoring.

PubMed

Salonen, K; Leisola, M; Eerikäinen, T

2009-01-01

Determination of metabolites from an anaerobic digester with an acid base titration is considered as superior method for many reasons. This paper describes a practical at line compatible multipoint titration method. The titration procedure was improved by speed and data quality. A simple and novel control algorithm for estimating a variable titrant dose was derived for this purpose. This non-linear PI-controller like algorithm does not require any preliminary information from sample. Performance of this controller is superior compared to traditional linear PI-controllers. In addition, simplification for presenting polyprotic acids as a sum of multiple monoprotic acids is introduced along with a mathematical error examination. A method for inclusion of the ionic strength effect with stepwise iteration is shown. The titration model is presented with matrix notations enabling simple computation of all concentration estimates. All methods and algorithms are illustrated in the experimental part. A linear correlation better than 0.999 was obtained for both acetate and phosphate used as model compounds with slopes of 0.98 and 1.00 and average standard deviations of 0.6% and 0.8%, respectively. Furthermore, insensitivity of the presented method for overlapping buffer capacity curves was shown.

The ACTIVATE study: results from a group-randomized controlled trial comparing a traditional worksite health promotion program with an activated consumer program.

PubMed

Terry, Paul E; Fowles, Jinnet Briggs; Xi, Min; Harvey, Lisa

2011-01-01

PURPOSE. This study compares a traditional worksite-based health promotion program with an activated consumer program and a control program DESIGN. Group randomized controlled trial with 18-month intervention. SETTING. Two large Midwestern companies. SUBJECTS. Three hundred and twenty employees (51% response). INTERVENTION. The traditional health promotion intervention offered population-level campaigns on physical activity, nutrition, and stress management. The activated consumer intervention included population-level campaigns for evaluating health information, choosing a health benefits plan, and understanding the risks of not taking medications as prescribed. The personal development intervention (control group) offered information on hobbies. The interventions also offered individual-level coaching for high risk individuals in both active intervention groups. MEASURES. Health risk status, general health status, consumer activation, productivity, and the ability to evaluate health information. ANALYSIS. Multivariate analyses controlled for baseline differences among the study groups. RESULTS. At the population level, compared with baseline performance, the traditional health promotion intervention improved health risk status, consumer activation, and the ability to recognize reliable health websites. Compared with baseline performance, the activated consumer intervention improved consumer activation, productivity, and the ability to recognize reliable health websites. At the population level, however, only the activated consumer intervention improved any outcome more than the control group did; that outcome was consumer activation. At the individual level for high risk individuals, both traditional health coaching and activated consumer coaching positively affected health risk status and consumer activation. In addition, both coaching interventions improved participant ability to recognize a reliable health website. Consumer activation coaching also significantly improved self-reported productivity. CONCLUSION. An effective intervention can change employee health risk status and activation both at the population level and at the individual high risk level. However, program engagement at the population level was low, indicating that additional promotional strategies, such as greater use of incentives, need to be examined. Less intensive coaching can be as effective as more intensive, albeit both interventions produced modest behavior change and retention in the consumer activation arm was most difficult. Further research is needed concerning recruitment and retention methods that will enable populations to realize the full potential of activated consumerism.

Developing an Activity and Absorption-based Quality Control Platform for Chinese Traditional Medicine: Application to Zeng-Sheng-Ping

PubMed Central

Yin, Taijun; Yang, Guanyi; Ma, Yong; Xu, Beibei; Hu, Ming; You, Ming; Gao, Song

2015-01-01

Ethnopharmacological relevance Zeng-Sheng-Ping (ZSP) is a marketed Chinese traditional medicine used for cancer prevention. Aim of the study Currently, for the quality control of Chinese traditional medicines, marker compounds are not selected based on bioactivities and pharmaceutical behaviors in most of the cases. Therefore, even if the “quality” of the medicine is controlled, the pharmacological effect could still be inconsistent. The aim of this study is to establish an activity and absorption-based platform to select marker compound(s) for the quality control of Chinese traditional medicines. Materials and methods We used ZSP as a reference Chinese traditional medicine to establish the platform. Activity guided fractionation approach was used to purify the major components from ZSP. NMR and MS spectra were used to elucidate the structure of the isolated compounds. MTT assay against oral carcinoma cell line (SCC2095) was performed to evaluate the activities. UPLC-MS/MS was used to quantify the pure compounds in ZSP and the active fraction. The permeabilities of the identified compounds were evaluated in the Caco-2 cell culture model. The intracellular accumulation of the isolated compounds was evaluated in the SCC2095 cells. Results The major compounds were identified from ZSP. The contents, anti-proliferation activities, permeabilities, and intracellular accumulations of these compounds were also evaluated. The structure of these purified compounds were identified by comparing the NMR and MS data with those of references as rutaevine (1), limonin (2) , evodol (3), obacunone (4), fraxinellone (5), dictamnine (6), maackiain (7), trifolirhizin (8), and matrine (9). The IC50 of compounds 5, 6, and 7 against SCC2095 cells were significantly lower than that of ZSP. The uptake permeability of compounds 5, 6, and 7 were 2.58 ± 0. 3 × 10−5, 4.33 ± 0.5 × 10−5, and 4.27 ± 0.8 × 10−5 respectively in the Caco-2 cell culture model. The intracellular concentrations of these compounds showed that compounds 5, 6, and 7 were significantly accumulated inside the cells. Conclusion Based on the activity against oral carcinoma cell line as well as the absorption permeability, compound 5, 6, and 7 are selected as quality control markers for ZSP. A activity and absorption-based platform was established and successfully used for the quality control of ZSP. PMID:26099633

Marginal abatement cost curve for nitrogen oxides incorporating controls, renewable electricity, energy efficiency, and fuel switching.

PubMed

Loughlin, Daniel H; Macpherson, Alexander J; Kaufman, Katherine R; Keaveny, Brian N

2017-10-01

A marginal abatement cost curve (MACC) traces out the relationship between the quantity of pollution abated and the marginal cost of abating each additional unit. In the context of air quality management, MACCs are typically developed by sorting control technologies by their relative cost-effectiveness. Other potentially important abatement measures such as renewable electricity, energy efficiency, and fuel switching (RE/EE/FS) are often not incorporated into MACCs, as it is difficult to quantify their costs and abatement potential. In this paper, a U.S. energy system model is used to develop a MACC for nitrogen oxides (NO x ) that incorporates both traditional controls and these additional measures. The MACC is decomposed by sector, and the relative cost-effectiveness of RE/EE/FS and traditional controls are compared. RE/EE/FS are shown to have the potential to increase emission reductions beyond what is possible when applying traditional controls alone. Furthermore, a portion of RE/EE/FS appear to be cost-competitive with traditional controls. Renewable electricity, energy efficiency, and fuel switching can be cost-competitive with traditional air pollutant controls for abating air pollutant emissions. The application of renewable electricity, energy efficiency, and fuel switching is also shown to have the potential to increase emission reductions beyond what is possible when applying traditional controls alone.

Hybrid LES/RANS simulation of a turbulent boundary layer over a rectangular cavity

NASA Astrophysics Data System (ADS)

Zhang, Qi; Haering, Sigfried; Oliver, Todd; Moser, Robert

2016-11-01

We report numerical investigations of a turbulent boundary layer over a rectangular cavity using a new hybrid RANS/LES model and the traditional Detached Eddy Simulation (DES). Our new hybrid method aims to address many of the shortcomings from the traditional DES. In the new method, RANS/LES blending controlled by a parameter that measures the ratio of the modeled subgrid kinetic energy to an estimate of the subgrid energy based on the resolved scales. The result is a hybrid method automatically resolves as much turbulence as can be supported by the grid and transitions appropriately from RANS to LES without the need for ad hoc delaying functions that are often required for DES. Further, the new model is designed to improve upon DES by accounting for the effects of grid anisotropy and inhomogeneity in the LES region. We present comparisons of the flow features inside the cavity and the pressure time history and spectra as computed using the new hybrid model and DES.

Clinical simulation training improves the clinical performance of Chinese medical students

PubMed Central

Zhang, Ming-ya; Cheng, Xin; Xu, An-ding; Luo, Liang-ping; Yang, Xuesong

2015-01-01

Background Modern medical education promotes medical students’ clinical operating capacity rather than the mastery of theoretical knowledge. To accomplish this objective, clinical skill training using various simulations was introduced into medical education to cultivate creativity and develop the practical ability of students. However, quantitative analysis of the efficiency of clinical skill training with simulations is lacking. Methods In the present study, we compared the mean scores of medical students (Jinan University) who graduated in 2013 and 2014 on 16 stations between traditional training (control) and simulative training groups. In addition, in a clinical skill competition, the objective structured clinical examination (OSCE) scores of participating medical students trained using traditional and simulative training were compared. The data were statistically analyzed and qualitatively described. Results The results revealed that simulative training could significantly enhance the graduate score of medical students compared with the control. The OSCE scores of participating medical students in the clinical skill competition, trained using simulations, were dramatically higher than those of students trained through traditional methods, and we also observed that the OSCE marks were significantly increased for the same participant after simulative training for the clinical skill competition. Conclusions Taken together, these data indicate that clinical skill training with a variety of simulations could substantially promote the clinical performance of medical students and optimize the resources used for medical education, although a precise analysis of each specialization is needed in the future. PMID:26478142

One output function: a misconception of students studying digital systems - a case study

NASA Astrophysics Data System (ADS)

Trotskovsky, E.; Sabag, N.

2015-05-01

Background:Learning processes are usually characterized by students' misunderstandings and misconceptions. Engineering educators intend to help their students overcome their misconceptions and achieve correct understanding of the concept. This paper describes a misconception in digital systems held by many students who believe that combinational logic circuits should have only one output. Purpose:The current study aims to investigate the roots of the misconception about one-output function and the pedagogical methods that can help students overcome the misconception. Sample:Three hundred and eighty-one students in the Departments of Electrical and Electronics and Mechanical Engineering at an academic engineering college, who learned the same topics of a digital combinational system, participated in the research. Design and method:In the initial research stage, students were taught according to traditional method - first to design a one-output combinational logic system, and then to implement a system with a number of output functions. In the main stage, an experimental group was taught using a new method whereby they were shown how to implement a system with several output functions, prior to learning about one-output systems. A control group was taught using the traditional method. In the replication stage (the third stage), an experimental group was taught using the new method. A mixed research methodology was used to examine the results of the new learning method. Results:Quantitative research showed that the new teaching approach resulted in a statistically significant decrease in student errors, and qualitative research revealed students' erroneous thinking patterns. Conclusions:It can be assumed that the traditional teaching method generates an incorrect mental model of the one-output function among students. The new pedagogical approach prevented the creation of an erroneous mental model and helped students develop the correct conceptual understanding.

Some Modeling Tools Available for Adaptive Management of South Florida Hydrology

NASA Astrophysics Data System (ADS)

Lal, W. A.; Van Zee, R. J.

2002-05-01

The hydrology of South Florida is a result of (1) the hydrology of the natural system; (2) the hydrology of the man made design components such as structures and levees designed to alter the natural hydrology; (3) influence of the operations imposed on the system using the design components. Successful restoration of the South Florida ecosystem depend not only on the design of the structural components, but also on its careful operation. The current discussion is focused on a number of optimal control methods that have recently become available to optimize restoration goals in the context of modeling. Optimal operation of the system can lessen stresses on some hydrological and ecological components. Careless operation can on the other hand lead to disastrous effects. Systems engineering and control theory have been used in the past to understand and operate simple systems such as the cruise control and the thermostat. Somewhat complex ones have been used to auto-pilot planes. The simplest control methods such as proportional and integral (PI) control are already used in the South Florida Water Management Model (SFWMM) for flood control and rain driven operations. The popular proportional-integral-differential (PID) control is widely used in industry for operational control of complex engineering systems. Some uses of PID control are investigated in the study. Other methods that an be used for operational control include Baysean methods, Kalman filtering and Neural network methods. A cursory evaluation of these methods is made in the discussion, along with the traditional methods used to operate complex engineering systems.

Rotator Cuff Repair with a Tendon-Fibrocartilage-Bone Composite Bridging Patch

PubMed Central

Ji, Xiaoxi; Chen, Qingshan; Thoreson, Andrew R.; Qu, Jin; An, Kai-Nan; Amadio, Peter C.; Steinmann, Scott P.; Zhao, Chunfeng

2015-01-01

Background To compare the mechanical performance of a rotator cuff repaired with a novel tendon-fibrocartilage-bone composite bridging patch vs the traditional Mason-Allen repair in an in vitro canine model. Methods Twenty shoulders and 10 bridging patches from patellar tendon were harvested. The patches were trimmed and sliced into 2 layers. An infraspinatus tendon tear was created in each shoulder. Modified Mason-Allen sutures were used to repair the infraspinatus tendon to the greater tuberosity, with or without the bridging patch (bridging patch group and controls, respectively). Shoulders were loaded to failure under displacement control at a rate of 0.5mm/sec. Findings The ultimate tensile load was significantly higher in the bridging patch group than control (mean [SD], 365.46 [36.45] vs 272.79 [48.88] N; P<.001). Stiffness at the greater tuberosity repair site and the patch-infraspinatus tendon repair site was significantly higher than the control repair site (93.96 [27.72] vs 42.62 [17.48] N/mm P<.001; 65.94 [24.51] vs 42.62 [17.48] N/mm P=.02, respectively). Interpretation The tendon-fibrocartilage-bone composite bridging patch achieved higher ultimate tensile load and stiffness at the patch–greater tuberosity repair site compared with traditional repair in a canine model. This composite tissue transforms the traditional tendon-to-bone healing interface (with dissimilar tissues) into a pair of bone-to-bone and tendon-to-tendon interfaces, which may improve healing quality and reduce retear rate. PMID:26190097

Report from the Second International Conference of Traditional and Complementary Medicine on Health 2015

PubMed Central

Isidoro, Ciro; Huang, Chia-Chi; Sheen, Lee-Yan

2016-01-01

The Second International Conference of Traditional and Complementary Medicine on Health was held from October 24th through 27th at the GIS National Taiwan University Convention Center in Taipei. Twenty-seven invited speakers, representative of fourteen Countries, delivered their lecture in front of an audience of more than two hundreds of attendees. In addition, a poster exhibition with seventy-two presenters completed the scientific sessions. The leitmotif of the Conference was to promote a common platform in which all medical knowledge is integrated to improve the health care system. Traditional medicine and complementary medicine are characterized by a holistic approach to prevent and cure diseases, making use of natural products and/or physical manipulations. In this context, the Conference emphasized the importance of the Quality Control and of standardized methods for the authentication, preparation and characterization of the herbal products and nutrient supplements, as well as the need for controlled clinical trials and for experimental studies to demonstrate the efficacy and to understand the underlying mechanisms of the preventive and curative treatments. In this report, we highlight the novel findings and the perspectives in Traditional and Complementary Medicine (TCM; 傳統暨互補醫學 chuán tǒng jì hù bǔ yī xué) that emerged during the conference. PMID:26870692

Study of urban spatial utilization on socio-cultural and environment based on sustainability index (study in Denpasar city)

NASA Astrophysics Data System (ADS)

Wiryananda, N. G. A. K.; Hasibuan, H. S.; Madiasworo, T.

2018-03-01

The rapid development of tourism and population growth in Denpasar City stimulated the dynamic changes in the spatial utilization. This study aims to analyse the impact of spatial utilization on sociocultural and environment and formulate the sustainable spatial utilization that accommodate both social and environmental aspects. This research uses methods of spatial analysis and sustainability index. The results showed that during the period of 2011 to 2015 there was an increase of settlement and tourism land uses, meanwhile at the same period the paddy field decreased. The impact of spatial utilization on sociocultural leads to unsustainable, that showed by the decreasing of the sociocultural index from 1.038 in 2011 to 1.036 in 2015. The low of sociocultural index was stated by the increasing poverty, the obedience of traditional rules of purity radius of Temple and the height limit of the building. The impact of spatial utilization on environmental leads to unsustainable, with the environmental index of 1.065 in 2011 decreased to 1.056 in 2015. The decline of environmental index is due to reduced green open space and paddy field. The strategy formulation of sustainable spatial utilization is done by integrating traditional rules into spatial planning, plan the vertical building, strengthening implementation of traditional rules, implementation of perennial paddy field, and the establishment of traditional task control unit of spatial control.

Potential effectiveness of traditional Chinese medicine for cardiac syndrome X (CSX): a systematic review and meta-analysis

PubMed Central

2013-01-01

Background Treatment of cardiac syndrome X with unknown pathological mechanism remains a big challenge for clinicians. Complementary and alternative medicine may bring a new choice for its management. The aim of this study is to evaluate the clinical effects of traditional Chinese medicine on cardiac syndrome X patients. Methods We systematically searched databases such as Cochrane CENTRAL, PubMed, EMBASE, CBM, Chinese National Knowledge Infrastructure (CNKI), WanFang and VIP, and handsearched relevant journals to identify randomized controlled trials. Following the steps of systematic review recommended by the Cochrane group, we assessed the quality of included studies, extracted valid data and undertook meta-analysis. Results Twenty one moderate-to low-quality randomized controlled trials involving 1143 patients were included. The results showed that traditional Chinese medicine could improve angina [OR=1.34, 95% CI: 1.2 to 1.50], electrocardiogram (ECG), endothelin-1 (ET-1) levels, prolong exercise duration in treadmill tests, and reduce angina frequency per week compared with routine treatment. No other side effect was reported except two cases of stomach pain. Conclusion Compared with conventional treatment, traditional Chinese medicine shows the potential of optimizing symptomatic outcomes and improving ECG and exercise duration. The efficacy of TCM may find explanation in its pharmacological activity of adjusting the endothelial function. TCM, as a kind of alternative and complementary medicine, may provide another choice for CSX patients. PMID:23497135

[Monitoring method of extraction process for Schisandrae Chinensis Fructus based on near infrared spectroscopy and multivariate statistical process control].

PubMed

Xu, Min; Zhang, Lei; Yue, Hong-Shui; Pang, Hong-Wei; Ye, Zheng-Liang; Ding, Li

2017-10-01

To establish an on-line monitoring method for extraction process of Schisandrae Chinensis Fructus, the formula medicinal material of Yiqi Fumai lyophilized injection by combining near infrared spectroscopy with multi-variable data analysis technology. The multivariate statistical process control (MSPC) model was established based on 5 normal batches in production and 2 test batches were monitored by PC scores, DModX and Hotelling T2 control charts. The results showed that MSPC model had a good monitoring ability for the extraction process. The application of the MSPC model to actual production process could effectively achieve on-line monitoring for extraction process of Schisandrae Chinensis Fructus, and can reflect the change of material properties in the production process in real time. This established process monitoring method could provide reference for the application of process analysis technology in the process quality control of traditional Chinese medicine injections. Copyright© by the Chinese Pharmaceutical Association.

Alternative Attitude Commanding and Control for Precise Spacecraft Landing

NASA Technical Reports Server (NTRS)

Singh, Gurkirpal

2004-01-01

A report proposes an alternative method of control for precision landing on a remote planet. In the traditional method, the attitude of a spacecraft is required to track a commanded translational acceleration vector, which is generated at each time step by solving a two-point boundary value problem. No requirement of continuity is imposed on the acceleration. The translational acceleration does not necessarily vary smoothly. Tracking of a non-smooth acceleration causes the vehicle attitude to exhibit undesirable transients and poor pointing stability behavior. In the alternative method, the two-point boundary value problem is not solved at each time step. A smooth reference position profile is computed. The profile is recomputed only when the control errors get sufficiently large. The nominal attitude is still required to track the smooth reference acceleration command. A steering logic is proposed that controls the position and velocity errors about the reference profile by perturbing the attitude slightly about the nominal attitude. The overall pointing behavior is therefore smooth, greatly reducing the degree of pointing instability.

Safe male circumcision in Botswana: Tension between traditional practices and biomedical marketing

PubMed Central

Katisi, Masego; Daniel, Marguerite

2015-01-01

Botswana has been running Safe Male Circumcision (SMC) since 2009 and has not yet met its target. Donors like the US Centers for Disease Control and Prevention and Africa Comprehensive HIV/AIDS Partnership (funded by the Gates Foundation) in collaboration with Botswana's Ministry of Health have invested much to encourage HIV-negative men to circumcise. Demand creation strategies make use of media and celebrities. The objective of this paper is to explore responses to SMC in relation to circumcision as part of traditional initiation practices. More specifically, we present the views of two communities in Botswana on SMC consultation processes, implementation procedures and campaign strategies. The methods used include participant observation, in-depth interviews with key stakeholders (donors, implementers and Ministry officials), community leaders and men in the community. We observe that consultation with traditional leaders was done in a seemingly superficial, non-participatory manner. While SMC implementers reported pressure to deliver numbers to the World Health Organization, traditional leaders promoted circumcision through their routine traditional initiation ceremonies at breaks of two-year intervals. There were conflicting views on public SMC demand creation campaigns in relation to the traditional secrecy of circumcision. In conclusion, initial cooperation of local chiefs and elders turned into resistance. PMID:25866013

Safe male circumcision in Botswana: tension between traditional practices and biomedical marketing.

PubMed

Katisi, Masego; Daniel, Marguerite

2015-01-01

Botswana has been running Safe Male Circumcision (SMC) since 2009 and has not yet met its target. Donors like the US Centers for Disease Control and Prevention and Africa Comprehensive HIV/AIDS Partnership (funded by the Gates Foundation) in collaboration with Botswana's Ministry of Health have invested much to encourage HIV-negative men to circumcise. Demand creation strategies make use of media and celebrities. The objective of this paper is to explore responses to SMC in relation to circumcision as part of traditional initiation practices. More specifically, we present the views of two communities in Botswana on SMC consultation processes, implementation procedures and campaign strategies. The methods used include participant observation, in-depth interviews with key stakeholders (donors, implementers and Ministry officials), community leaders and men in the community. We observe that consultation with traditional leaders was done in a seemingly superficial, non-participatory manner. While SMC implementers reported pressure to deliver numbers to the World Health Organization, traditional leaders promoted circumcision through their routine traditional initiation ceremonies at breaks of two-year intervals. There were conflicting views on public SMC demand creation campaigns in relation to the traditional secrecy of circumcision. In conclusion, initial cooperation of local chiefs and elders turned into resistance.

Relationships among video gaming proficiency and spatial orientation, laparoscopic, and traditional surgical skills of third-year veterinary students.

PubMed

Millard, Heather A Towle; Millard, Ralph P; Constable, Peter D; Freeman, Lyn J

2014-02-01

To determine the relationships among traditional and laparoscopic surgical skills, spatial analysis skills, and video gaming proficiency of third-year veterinary students. Prospective, randomized, controlled study. A convenience sample of 29 third-year veterinary students. The students had completed basic surgical skills training with inanimate objects but had no experience with soft tissue, orthopedic, or laparoscopic surgery; the spatial analysis test; or the video games that were used in the study. Scores for traditional surgical, laparoscopic, spatial analysis, and video gaming skills were determined, and associations among these were analyzed by means of Spearman's rank order correlation coefficient (rs). A significant positive association (rs = 0.40) was detected between summary scores for video game performance and laparoscopic skills, but not between video game performance and traditional surgical skills scores. Spatial analysis scores were positively (rs = 0.30) associated with video game performance scores; however, that result was not significant. Spatial analysis scores were not significantly associated with laparoscopic surgical skills scores. Traditional surgical skills scores were not significantly associated with laparoscopic skills or spatial analysis scores. Results of this study indicated video game performance of third-year veterinary students was predictive of laparoscopic but not traditional surgical skills, suggesting that laparoscopic performance may be improved with video gaming experience. Additional studies would be required to identify methods for improvement of traditional surgical skills.

Signaling Device for the Pre-Emergency State of the Elements of the Rotating Assembly of Steam Compressor of Desalination Plant

NASA Astrophysics Data System (ADS)

Danilin, A. I.; Chernyavskiy, A. Zh; Danilin, S. A.; Blagin, E. V.

2018-01-01

This article deals with non-contact exploitation control method based on the treatment of the radio wave signal reflected from controlled gear teeth and its advantages in comparison with traditional methods of gear teeth control. Justification of necessity to use such control method during multiplier gears condition determination during its exploitation is given. Also this article deals with influence of different types of gear wear on typical information parameters of analyzed signals. Disadvantages of the method which are the impossibility of determination of certain types of wear are also taken into account. Certain stages of the development of mathematical model for interaction of first converter with controlled surface. Suggested mathematical model uses only the laws of geometric optics without taking wave processes into account but considering first converter direction diagram influence during its interaction with controlled surface. Structural scheme of developed experimental system for gears teeth condition control for steam compressor. Operation of the experimental system of gear control is given on the base of structural scheme. Core of the developed device is microcontroller STM32 which treat the information received from the sensors as well as connection with computer. Certain elements of the experimental control system as well as its components are described separately. Photos of experimental unit for control for control method development in laboratory conditions are presented. Design of the first converter is given in short.

HPTLC Fingerprint Analysis: A Quality Control for Authentication of Herbal Phytochemicals

NASA Astrophysics Data System (ADS)

Ram, Mauji; Abdin, M. Z.; Khan, M. A.; Jha, Prabhakar

Authentication and consistent quality are the basic requirement for Indian traditional medicine (TIM), Chinese traditional herbal medicine (TCHM), and their commercial products, regardless of the kind of research conducted to modernize the TIM and TCHM. The complexities of TIM and TCHM challenge the current official quality control mode, for which only a few biochemical markers were selected for identification and quantitative assay. Referring too many unknown factors existed in TIM and TCHM, it is impossible and unnecessary to pinpoint qualitatively and quantitatively every single component contained in the herbal drug. Chromatographic fingerprint is a rational option to meet the need for more effective and powerful quality assessment to TIM and TCHM. The optimized chromatographic fingerprint is not only an alternative analytical tool for authentication, but also an approach to express the various pattern of chemical ingredients distribution in the herbal drugs and preserve such "database" for further multifaced sustainable studies. Analytical separation techniques, for example, high-performance liquid chromatography (HPLC), gas chromatography (GC) and mass spectrometry (MS) were among the most popular methods of choice used for quality control of raw material and finished herbal product. Fingerprint analysis approach using high-performance thin-layer chromatography (HPTLC) has become the most potent tool for quality control of herbal medicines because of its simplicity and reliability. It can serve as a tool for identification, authentication, and quality control of herbal drugs. In this chapter, attempts are being made to expand the use of HPTLC and at the same time create interest among prospective researcher in herbal analysis. The developed method can be used as a quality control tool for rapid authentication from a wide variety of herbal samples. Some examples demonstrated the role of fingerprinting in quality control and assessment.

A series of strategies for solving the shortage of reference standards for multi-components determination of traditional Chinese medicine, Mahoniae Caulis as a case.

PubMed

Wang, Wenguang; Ma, Xiaoli; Guo, Xiaoyu; Zhao, Mingbo; Tu, Pengfei; Jiang, Yong

2015-09-18

In order to solve the bottleneck of reference standards shortage for comprehensive quality control of traditional Chinese medicines (TCMs), a series of strategies, including one single reference standard to determine multi-compounds (SSDMC), quantitative analysis by standardized reference extract (QASRE), and quantitative nuclear magnetic resonance spectroscopy (qNMR) were proposed, and Mahoniae Caulis was selected as an example to develop and validate these methods for simultaneous determination of four alkaloids, columbamine, jatrorrhizine, palmatine, and berberine. Comprehensive comparisons among these methods and with the conventional external standard method (ESM) were carried out. The relative expanded uncertainty of measurement was firstly used to compare their credibility. The results showed that all these three new developed methods can accurately accomplish the quantification by using only one purified reference standard, but each of them has its own advantages and disadvantages as well as the specific application scope, which were also discussed in detail in this paper. Copyright © 2015 Elsevier B.V. All rights reserved.

Laboratory Diagnosis of Human Rabies: Recent Advances

PubMed Central

Mani, Reeta Subramaniam; Madhusudana, Shampur Narayan

2013-01-01

Rabies, an acute progressive, fatal encephalomyelitis, transmitted most commonly through the bite of a rabid animal, is responsible for an estimated 61,000 human deaths worldwide. The true disease burden and public health impact due to rabies remain underestimated due to lack of sensitive laboratory diagnostic methods. Rapid diagnosis of rabies can help initiate prompt infection control and public health measures, obviate the need for unnecessary treatment/medical tests, and assist in timely administration of pre- or postexposure prophylactic vaccination to family members and medical staff. Antemortem diagnosis of human rabies provides an impetus for clinicians to attempt experimental therapeutic approaches in some patients, especially after the reported survival of a few cases of human rabies. Traditional methods for antemortem and postmortem rabies diagnosis have several limitations. Recent advances in technology have led to the improvement or development of several diagnostic assays which include methods for rabies viral antigen and antibody detection and assays for viral nucleic acid detection and identification of specific biomarkers. These assays which complement traditional methods have the potential to revolutionize rabies diagnosis in future. PMID:24348170

Impacts of Oil and Gas Production on Winter Ozone Pollution in the Uintah Basin Using Model Source Apportionment

NASA Astrophysics Data System (ADS)

Tran, H. N. Q.; Tran, T. T.; Mansfield, M. L.; Lyman, S. N.

2014-12-01

Contributions of emissions from oil and gas activities to elevated ozone concentrations in the Uintah Basin - Utah were evaluated using the CMAQ Integrated Source Apportionment Method (CMAQ-ISAM) technique, and were compared with the results of traditional budgeting methods. Unlike the traditional budgeting method, which compares simulations with and without emissions of the source(s) in question to quantify its impacts, the CMAQ-ISAM technique assigns tags to emissions of each source and tracks their evolution through physical and chemical processes to quantify the final ozone product yield from the source. Model simulations were performed for two episodes in winter 2013 of low and high ozone to provide better understanding of source contributions under different weather conditions. Due to the highly nonlinear ozone chemistry, results obtained from the two methods differed significantly. The growing oil and gas industry in the Uintah Basin is the largest contributor to the elevated zone (>75 ppb) observed in the Basin. This study therefore provides an insight into the impact of oil and gas industry on the ozone issue, and helps in determining effective control strategies.

Synthesis of silica aerogel monoliths with controlled specific surface areas and pore sizes

NASA Astrophysics Data System (ADS)

Gao, Bingying; Lu, Shaoxiang; Kalulu, Mulenga; Oderinde, Olayinka; Ren, Lili

2017-07-01

To replace traditional preparation methods of silica aerogels, a small-molecule 1,2-epoxypropane (PO) has been introduced into the preparation process instead of using ammonia as the cross-linking agent, thus generating a lightweight, high porosity, and large surface area silica aerogel monolithic. We put forward a simple solution route for the chemical synthesis of silica aerogels, which was characterized by scanning electron microscopy (SEM), TEM, XRD, FTIR, thermogravimetric analysis (TGA) and the Brunauer-Emmett-Teller (BET) method In this paper, the effect of the amount of PO on the microstructure of silica aerogels is discussed. The BET surface areas and pore sizes of the resulting silica aerogels can be freely adjusted by changing the amount of PO, which will be helpful in promoting the development of silica aerogels to fabricate other porous materials with similar requirements. We also adopted a new organic solvent sublimation drying (OSSD) method to replace traditional expensive and dangerous drying methods such as critical point drying and freeze drying. This simple approach is easy to operate and has good repeatability, which will further facilitate actual applications of silica aerogels.

An automatic optimum number of well-distributed ground control lines selection procedure based on genetic algorithm

NASA Astrophysics Data System (ADS)

Yavari, Somayeh; Valadan Zoej, Mohammad Javad; Salehi, Bahram

2018-05-01

The procedure of selecting an optimum number and best distribution of ground control information is important in order to reach accurate and robust registration results. This paper proposes a new general procedure based on Genetic Algorithm (GA) which is applicable for all kinds of features (point, line, and areal features). However, linear features due to their unique characteristics are of interest in this investigation. This method is called Optimum number of Well-Distributed ground control Information Selection (OWDIS) procedure. Using this method, a population of binary chromosomes is randomly initialized. The ones indicate the presence of a pair of conjugate lines as a GCL and zeros specify the absence. The chromosome length is considered equal to the number of all conjugate lines. For each chromosome, the unknown parameters of a proper mathematical model can be calculated using the selected GCLs (ones in each chromosome). Then, a limited number of Check Points (CPs) are used to evaluate the Root Mean Square Error (RMSE) of each chromosome as its fitness value. The procedure continues until reaching a stopping criterion. The number and position of ones in the best chromosome indicate the selected GCLs among all conjugate lines. To evaluate the proposed method, a GeoEye and an Ikonos Images are used over different areas of Iran. Comparing the obtained results by the proposed method in a traditional RFM with conventional methods that use all conjugate lines as GCLs shows five times the accuracy improvement (pixel level accuracy) as well as the strength of the proposed method. To prevent an over-parametrization error in a traditional RFM due to the selection of a high number of improper correlated terms, an optimized line-based RFM is also proposed. The results show the superiority of the combination of the proposed OWDIS method with an optimized line-based RFM in terms of increasing the accuracy to better than 0.7 pixel, reliability, and reducing systematic errors. These results also demonstrate the high potential of linear features as reliable control features to reach sub-pixel accuracy in registration applications.

Using an interlaboratory study to revise methods for conducting 10-d to 42-d water or sediment toxicity tests with Hyalella azteca

USGS Publications Warehouse

Ivey, Chris D.; Ingersoll, Christopher G.; Brumbaugh, William G.; Hammer, Edward J.; Mount, David R.; Hockett, J. Russell; Norberg-King, Teresa J.; Soucek, Dave; Taylor, Lisa

2016-01-01

Studies have been conducted to refine US Environmental Protection Agency, ASTM International, and Environment Canada standard methods for conducting 42-d reproduction tests with Hyalella azteca in water or in sediment. Modifications to the H. azteca method include better-defined ionic composition requirements for exposure water (i.e., >15 mg/L of chloride and >0.02 mg/L of bromide) and improved survival, growth, and reproduction with alternate diets provided as increased rations over time in water-only or whole-sediment toxicity tests. A total of 24 laboratories volunteered to participate in the present interlaboratory study evaluating the performance of H. azteca in 42-d studies in control sand or control sediment using the refined methods. Improved growth and reproduction of H. azteca was observed with 2 alternate diets of 1) ramped diatoms (Thalassiosira weissflogii) + ramped Tetramin or 2) yeast–cerophyll–trout chow (YCT) + ramped Tetramin, especially when compared with results from the traditional diet of 1.8 mg YCT/d. Laboratories were able to meet proposed test acceptability criteria and in most cases had lower variation in growth or reproduction compared with previous interlaboratory studies using the traditional YCT diet. Laboratory success in conducting 42-d H. azteca exposures benefited from adherence to several key requirements of the detailed testing, culturing, and handling methods. Results from the present interlaboratory study are being used to help revise standard methods for conducting 10-d to 42-d water or sediment toxicity exposures with H. azteca.

Divergence correction schemes in finite difference method for 3D tensor CSAMT in axial anisotropic media

NASA Astrophysics Data System (ADS)

Wang, Kunpeng; Tan, Handong; Zhang, Zhiyong; Li, Zhiqiang; Cao, Meng

2017-05-01

Resistivity anisotropy and full-tensor controlled-source audio-frequency magnetotellurics (CSAMT) have gradually become hot research topics. However, much of the current anisotropy research for tensor CSAMT only focuses on the one-dimensional (1D) solution. As the subsurface is rarely 1D, it is necessary to study three-dimensional (3D) model response. The staggered-grid finite difference method is an effective simulation method for 3D electromagnetic forward modelling. Previous studies have suggested using the divergence correction to constrain the iterative process when using a staggered-grid finite difference model so as to accelerate the 3D forward speed and enhance the computational accuracy. However, the traditional divergence correction method was developed assuming an isotropic medium. This paper improves the traditional isotropic divergence correction method and derivation process to meet the tensor CSAMT requirements for anisotropy using the volume integral of the divergence equation. This method is more intuitive, enabling a simple derivation of a discrete equation and then calculation of coefficients related to the anisotropic divergence correction equation. We validate the result of our 3D computational results by comparing them to the results computed using an anisotropic, controlled-source 2.5D program. The 3D resistivity anisotropy model allows us to evaluate the consequences of using the divergence correction at different frequencies and for two orthogonal finite length sources. Our results show that the divergence correction plays an important role in 3D tensor CSAMT resistivity anisotropy research and offers a solid foundation for inversion of CSAMT data collected over an anisotropic body.

Smart-device environmental control systems: experiences of people with cervical spinal cord injuries.

PubMed

Hooper, Bethany; Verdonck, Michele; Amsters, Delena; Myburg, Michelle; Allan, Emily

2017-09-06

Environmental control systems (ECS) are devices that enable people with severe physical limitations to independently control household appliances. Recent advancements in the area of environmental control technology have led to the development of ECS that can be controlled through mainstream smart-devices. There is limited research on ECS within Australia and no known research addressing smart-device ECS. The current study sought to explore users' experiences with smart-device ECS within Australia. The study followed a single embedded case study method. Participants (n = 5) were existing ECS users with a cervical spinal cord injury. Data were collected through semi-structured interviews with participants, reflexive journals and field notes. An inductive approach was used to analyze the data thematically. The experience of using a smart-device ECS presented both opportunities and costs to users. The opportunities included: independent control, choice, peace of mind, connection, effective resource use, and control over smart-phone functions and applications. The associated costs included: financial, time, frustration, and technical limitations. While findings are similar to previous research into traditional ECS this study indicates that smart-device ECS also offered a new opportunity for users to access mainstream smart-device functions and applications. Future research should investigate methods and resources that practitioners could utilize to better support new users of smart-device ECS. Implications for Rehabilitation As with traditional environmental control systems, users of smart environmental control systems report increased independence, choice and control. Smart-device environmental control systems provide users with access to mainstream smart-device functions and applications, which facilitate connection to family and the outside world. The costs to the user of smart-device environmental control systems include monetary and time investment, dealing with technical limitations and resulting frustration. Prescribers and installers must consider ways to mitigate these costs experienced by users.

Fractional Order PIλDμ Control for Maglev Guiding System

NASA Astrophysics Data System (ADS)

Hu, Qing; Hu, Yuwei

To effectively suppress the external disturbances and parameter perturbation problem of the maglev guiding system, and improve speed and robustness, the electromagnetic guiding system is exactly linearized using state feedback method, Fractional calculus theory is introduced, the order of integer order PID control was extended to the field of fractional, then fractional order PIλDμ Controller was presented, Due to the extra two adjustable parameters compared with traditional PID controller, fractional order PIλDμ controllers were expected to show better control performance. The results of the computer simulation show that the proposed controller suppresses the external disturbances and parameter perturbation of the system effectively; the system response speed was increased; at the same time, it had flexible structure and stronger robustness.

Nonprincipal plane scattering of flat plates and pattern control of horn antennas

NASA Technical Reports Server (NTRS)

Balanis, Constantine A.; Polka, Lesley A.; Liu, Kefeng

1989-01-01

Using the geometrical theory of diffraction, the traditional method of high frequency scattering analysis, the prediction of the radar cross section of a perfectly conducting, flat, rectangular plate is limited to principal planes. Part A of this report predicts the radar cross section in nonprincipal planes using the method of equivalent currents. This technique is based on an asymptotic end-point reduction of the surface radiation integrals for an infinite wedge and enables nonprincipal plane prediction. The predicted radar cross sections for both horizontal and vertical polarizations are compared to moment method results and experimental data from Arizona State University's anechoic chamber. In part B, a variational calculus approach to the pattern control of the horn antenna is outlined. The approach starts with the optimization of the aperture field distribution so that the control of the radiation pattern in a range of directions can be realized. A control functional is thus formulated. Next, a spectral analysis method is introduced to solve for the eigenfunctions from the extremal condition of the formulated functional. Solutions to the optimized aperture field distribution are then obtained.

Suboptimal artificial potential function sliding mode control for spacecraft rendezvous with obstacle avoidance

NASA Astrophysics Data System (ADS)

Cao, Lu; Qiao, Dong; Xu, Jingwen

2018-02-01

Sub-Optimal Artificial Potential Function Sliding Mode Control (SOAPF-SMC) is proposed for the guidance and control of spacecraft rendezvous considering the obstacles avoidance, which is derived based on the theories of artificial potential function (APF), sliding mode control (SMC) and state dependent riccati equation (SDRE) technique. This new methodology designs a new improved APF to describe the potential field. It can guarantee the value of potential function converge to zero at the desired state. Moreover, the nonlinear terminal sliding mode is introduced to design the sliding mode surface with the potential gradient of APF, which offer a wide variety of controller design alternatives with fast and finite time convergence. Based on the above design, the optimal control theory (SDRE) is also employed to optimal the shape parameter of APF, in order to add some degree of optimality in reducing energy consumption. The new methodology is applied to spacecraft rendezvous with the obstacles avoidance problem, which is simulated to compare with the traditional artificial potential function sliding mode control (APF-SMC) and SDRE to evaluate the energy consumption and control precision. It is demonstrated that the presented method can avoiding dynamical obstacles whilst satisfying the requirements of autonomous rendezvous. In addition, it can save more energy than the traditional APF-SMC and also have better control accuracy than the SDRE.

Traditional and Cognitive Job Analyses as Tools for Understanding the Skills Gap.

ERIC Educational Resources Information Center

Hanser, Lawrence M.

Traditional methods of job and task analysis may be categorized as worker-oriented methods focusing on general human behaviors performed by workers in jobs or as job-oriented methods focusing on the technologies involved in jobs. The ability of both types of traditional methods to identify, understand, and communicate the skills needed in high…

Emergency skill training--a randomized controlled study on the effectiveness of the 4-stage approach compared to traditional clinical teaching.

PubMed

Greif, Robert; Egger, Lars; Basciani, Reto M; Lockey, Andrew; Vogt, Andreas

2010-12-01

The "4-stage approach" has been widely accepted for practical skill training replacing the traditional 2 stages ("see one, do one"). However, the superior effectiveness of the 4-stage approach was never proved. To evaluate whether skill training with the 4-stage approach results in shorter performance time needed for a successful percutaneous needle-puncture cricothyroidotomy, and consequently in a reduced number of attempts needed to perform the skill in <60s compared to traditional teaching. Randomized controlled single-blinded parallel group study at the University Hospital Bern. With IRB approval and informed consent 128 undergraduate medical students were randomized in four groups: traditional teaching, no stage 2, no stage 3, and 4-stage approach for the training of cricothyroidotomy. Everyone watched a video of the cricothyroidotomy as stage 1 followed by skill training in the respective teaching group. Participants had to perform the cricothyroidotomy 10 times on skin-covered pig larynxes. Performance time was measured from skin palpation to trachea ventilation. Study participants filled out a self-rating on competency during the training. Performance time for each attempt was comparable in all groups and improved similarly to reach a performance time of <60 s. Self-rating revealed that all groups felt equally competent throughout. Even if the 4-stage approach is widely accepted and used as a didactic method for skill teaching we could not find evidence that its use or omitting stage 2 or 3 results in superior learning of an emergency skill compared to traditional teaching. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Generalized Predictive and Neural Generalized Predictive Control of Aerospace Systems

NASA Technical Reports Server (NTRS)

Kelkar, Atul G.

2000-01-01

The research work presented in this thesis addresses the problem of robust control of uncertain linear and nonlinear systems using Neural network-based Generalized Predictive Control (NGPC) methodology. A brief overview of predictive control and its comparison with Linear Quadratic (LQ) control is given to emphasize advantages and drawbacks of predictive control methods. It is shown that the Generalized Predictive Control (GPC) methodology overcomes the drawbacks associated with traditional LQ control as well as conventional predictive control methods. It is shown that in spite of the model-based nature of GPC it has good robustness properties being special case of receding horizon control. The conditions for choosing tuning parameters for GPC to ensure closed-loop stability are derived. A neural network-based GPC architecture is proposed for the control of linear and nonlinear uncertain systems. A methodology to account for parametric uncertainty in the system is proposed using on-line training capability of multi-layer neural network. Several simulation examples and results from real-time experiments are given to demonstrate the effectiveness of the proposed methodology.

Validation of Milliflex® Quantum for Bioburden Testing of Pharmaceutical Products.

PubMed

Gordon, Oliver; Goverde, Marcel; Staerk, Alexandra; Roesti, David

2017-01-01

This article reports the validation strategy used to demonstrate that the Milliflex ® Quantum yielded non-inferior results to the traditional bioburden method. It was validated according to USP <1223>, European Pharmacopoeia 5.1.6, and Parenteral Drug Association Technical Report No. 33 and comprised the validation parameters robustness, ruggedness, repeatability, specificity, limit of detection and quantification, accuracy, precision, linearity, range, and equivalence in routine operation. For the validation, a combination of pharmacopeial ATCC strains as well as a broad selection of in-house isolates were used. In-house isolates were used in stressed state. Results were statistically evaluated regarding the pharmacopeial acceptance criterion of ≥70% recovery compared to the traditional method. Post-hoc test power calculations verified the appropriateness of the used sample size to detect such a difference. Furthermore, equivalence tests verified non-inferiority of the rapid method as compared to the traditional method. In conclusion, the rapid bioburden on basis of the Milliflex ® Quantum was successfully validated as alternative method to the traditional bioburden test. LAY ABSTRACT: Pharmaceutical drug products must fulfill specified quality criteria regarding their microbial content in order to ensure patient safety. Drugs that are delivered into the body via injection, infusion, or implantation must be sterile (i.e., devoid of living microorganisms). Bioburden testing measures the levels of microbes present in the bulk solution of a drug before sterilization, and thus it provides important information for manufacturing a safe product. In general, bioburden testing has to be performed using the methods described in the pharmacopoeias (membrane filtration or plate count). These methods are well established and validated regarding their effectiveness; however, the incubation time required to visually identify microbial colonies is long. Thus, alternative methods that detect microbial contamination faster will improve control over the manufacturing process and speed up product release. Before alternative methods may be used, they must undergo a side-by-side comparison with pharmacopeial methods. In this comparison, referred to as validation, it must be shown in a statistically verified manner that the effectiveness of the alternative method is at least equivalent to that of the pharmacopeial methods. Here we describe the successful validation of an alternative bioburden testing method based on fluorescent staining of growing microorganisms applying the Milliflex ® Quantum system by MilliporeSigma. © PDA, Inc. 2017.

Quality assessment of internet pharmaceutical products using traditional and non-traditional analytical techniques.

PubMed

Westenberger, Benjamin J; Ellison, Christopher D; Fussner, Andrew S; Jenney, Susan; Kolinski, Richard E; Lipe, Terra G; Lyon, Robbe C; Moore, Terry W; Revelle, Larry K; Smith, Anjanette P; Spencer, John A; Story, Kimberly D; Toler, Duckhee Y; Wokovich, Anna M; Buhse, Lucinda F

2005-12-08

This work investigated the use of non-traditional analytical methods to evaluate the quality of a variety of pharmaceutical products purchased via internet sites from foreign sources and compared the results with those obtained from conventional quality assurance methods. Traditional analytical techniques employing HPLC for potency, content uniformity, chromatographic purity and drug release profiles were used to evaluate the quality of five selected drug products (fluoxetine hydrochloride, levothyroxine sodium, metformin hydrochloride, phenytoin sodium, and warfarin sodium). Non-traditional techniques, such as near infrared spectroscopy (NIR), NIR imaging and thermogravimetric analysis (TGA), were employed to verify the results and investigate their potential as alternative testing methods. Two of 20 samples failed USP monographs for quality attributes. The additional analytical methods found 11 of 20 samples had different formulations when compared to the U.S. product. Seven of the 20 samples arrived in questionable containers, and 19 of 20 had incomplete labeling. Only 1 of the 20 samples had final packaging similar to the U.S. products. The non-traditional techniques complemented the traditional techniques used and highlighted additional quality issues for the products tested. For example, these methods detected suspect manufacturing issues (such as blending), which were not evident from traditional testing alone.

Additional traditional Chinese medicine on gastrointestinal dysfunction in patients with sepsis: A systematic review and meta-analysis.

PubMed

Zhang, Yajing; Zhao, Zhiqiang; Tang, E; Hu, Yucai; Mao, Jingyuan

2016-03-01

To evaluate the clinical effect and safety of western medicine plus Traditional Chinese medicine for sepsis with gastrointestinal dysfunction. We searched CNKI (January 1979 to June 2014), VIP (January 1989 to June 2014), CBM (1978 to 2014), Wan Fang DATA (January 1990 to June 2014), PubMed (1978 to June 2014), The Cochrane Library (Issue 5, 2014), Embase (1974 to June 2014), and other relevant databases and journals to identify randomized controlled trials (RCTs) on western medicine plus Traditional Chinese medicine versus western medicine only for sepsis with gastrointestinal dysfunction. The methodological quality was assessed and the data was extracted according to the Cochrane Reviewer's Handbook and related methods. Meta-analyses were performed by RevMan 5.1.0 software. Five eligible studies included 278 patients. The results of meta-analyses showed that western medicine plus Traditional Chinese medicine therapy can improve the APACHEII score, the peristaltic sound score and SIRS score, improve abdominal distension, decreased white blood cell count, reduce DAO in sepsis patients with gastrointestinal dysfunction. 3 studies reported adverse reactions, there was no significant difference between two groups. Western medicine plus Traditional Chinese medicine can improve gastrointestinal dysfunction in sepsis.

Defining the questions: a research agenda for nontraditional authentication in arms control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hauck, Danielle K; Mac Arthur, Duncan W; Smith, Morag K

Many traditional authentication techniques have been based on hardware solutions. Thus authentication of measurement system hardware has been considered in terms of physical inspection and destructive analysis. Software authentication has implied hash function analysis or authentication tools such as Rose. Continuity of knowledge is maintained through TIDs and cameras. Although there is ongoing progress improving all of these authentication methods, there has been little discussion of the human factors involved in authentication. Issues of non-traditional authentication include sleight-of-hand substitutions, monitor perception vs. reality, and visual diversions. Since monitor confidence in a measurement system depends on the product of their confidencesmore » in each authentication element, it is important to investigate all authentication techniques, including the human factors. This paper will present an initial effort to identify the most important problems that traditional authentication approaches in safeguards have not addressed and are especially relevant to arms control verification. This will include a survey of the literature and direct engagement with nontraditional experts in areas like psychology and human factors. Based on the identification of problem areas, potential research areas will be identified and a possible research agenda will be developed.« less

Direct analysis in real time mass spectrometry and multivariate data analysis: a novel approach to rapid identification of analytical markers for quality control of traditional Chinese medicine preparation.

PubMed

Zeng, Shanshan; Wang, Lu; Chen, Teng; Wang, Yuefei; Mo, Huanbiao; Qu, Haibin

2012-07-06

The paper presents a novel strategy to identify analytical markers of traditional Chinese medicine preparation (TCMP) rapidly via direct analysis in real time mass spectrometry (DART-MS). A commonly used TCMP, Danshen injection, was employed as a model. The optimal analysis conditions were achieved by measuring the contribution of various experimental parameters to the mass spectra. Salvianolic acids and saccharides were simultaneously determined within a single 1-min DART-MS run. Furthermore, spectra of Danshen injections supplied by five manufacturers were processed with principal component analysis (PCA). Obvious clustering was observed in the PCA score plot, and candidate markers were recognized from the contribution plots of PCA. The suitability of potential markers was then confirmed by contrasting with the results of traditional analysis methods. Using this strategy, fructose, glucose, sucrose, protocatechuic aldehyde and salvianolic acid A were rapidly identified as the markers of Danshen injections. The combination of DART-MS with PCA provides a reliable approach to the identification of analytical markers for quality control of TCMP. Copyright © 2012 Elsevier B.V. All rights reserved.

Drift Mode Accelerometry for Spaceborne Gravity Measurements

NASA Astrophysics Data System (ADS)

Conklin, J. W.; Shelley, R.; Chilton, A.; Olatunde, T.; Ciani, G.; Mueller, G.

2014-12-01

A drift mode accelerometer is a precision instrument for spacecraft that overcomes much of the acceleration noise and readout dynamic range limitations of traditional electrostatic accelerometers. It has the potential of achieving acceleration noise performance similar to that of drag-free systems over a restricted frequency band without the need for external drag-free control or continuous spacecraft propulsion. Like traditional accelerometers, the drift mode accelerometer contains a high-density test mass surrounded by an electrode housing, which can control and sense all six degrees of freedom of the test mass. Unlike traditional accelerometers, the suspension system is operated with a low duty cycle so that the limiting suspension force noise only acts over brief, known time intervals, which can be accounted for in the data analysis. The readout is performed using a laser interferometer which is immune to the dynamic range limitations of even the best voltage references typically used to determine the inertial acceleration of electrostatic accelerometers. This presentation describes operation and performance modeling for such a device with respect to a low Earth orbiting satellite geodesy mission. Methods for testing the drift mode accelerometer with the University of Florida precision torsion pendulum will also be discussed.

The effect of neurofeedback on a brain wave and visual perception in stroke: a randomized control trial.

PubMed

Cho, Hwi-Young; Kim, Kitae; Lee, Byounghee; Jung, Jinhwa

2015-03-01

[Purpose] This study investigated a brain wave and visual perception changes in stroke subjects using neurofeedback (NFB) training. [Subjects] Twenty-seven stroke subjects were randomly allocated to the NFB (n = 13) group and the control group (n=14). [Methods] Two expert therapists provided the NFB and CON groups with traditional rehabilitation therapy in 30 thirst-minute sessions over the course of 6 weeks. NFB training was provided only to the NFB group. The CON group received traditional rehabilitation therapy only. Before and after the 6-week intervention, a brain wave test and motor free visual perception test (MVPT) were performed. [Results] Both groups showed significant differences in their relative beta wave values and attention concentration quotients. Moreover, the NFB group showed a significant difference in MVPT visual discrimination, form constancy, visual memory, visual closure, spatial relation, raw score, and processing time. [Conclusion] This study demonstrated that NFB training is more effective for increasing concentration and visual perception changes than traditional rehabilitation. In further studies, detailed and diverse investigations should be performed considering the number and characteristics of subjects, and the NFB training period.

Development of a neural network technique for KSTAR Thomson scattering diagnostics.

PubMed

Lee, Seung Hun; Lee, J H; Yamada, I; Park, Jae Sun

2016-11-01

Neural networks provide powerful approaches of dealing with nonlinear data and have been successfully applied to fusion plasma diagnostics and control systems. Controlling tokamak plasmas in real time is essential to measure the plasma parameters in situ. However, the χ 2 method traditionally used in Thomson scattering diagnostics hampers real-time measurement due to the complexity of the calculations involved. In this study, we applied a neural network approach to Thomson scattering diagnostics in order to calculate the electron temperature, comparing the results to those obtained with the χ 2 method. The best results were obtained for 10 3 training cycles and eight nodes in the hidden layer. Our neural network approach shows good agreement with the χ 2 method and performs the calculation twenty times faster.

Bidirectional Elastic Image Registration Using B-Spline Affine Transformation

PubMed Central

Gu, Suicheng; Meng, Xin; Sciurba, Frank C.; Wang, Chen; Kaminski, Naftali; Pu, Jiantao

2014-01-01

A registration scheme termed as B-spline affine transformation (BSAT) is presented in this study to elastically align two images. We define an affine transformation instead of the traditional translation at each control point. Mathematically, BSAT is a generalized form of the affine transformation and the traditional B-Spline transformation (BST). In order to improve the performance of the iterative closest point (ICP) method in registering two homologous shapes but with large deformation, a bi-directional instead of the traditional unidirectional objective / cost function is proposed. In implementation, the objective function is formulated as a sparse linear equation problem, and a sub-division strategy is used to achieve a reasonable efficiency in registration. The performance of the developed scheme was assessed using both two-dimensional (2D) synthesized dataset and three-dimensional (3D) volumetric computed tomography (CT) data. Our experiments showed that the proposed B-spline affine model could obtain reasonable registration accuracy. PMID:24530210

The Analysis of the Adverse Reaction of Traditional Chinese Medicine Tumor Bone Marrow Suppression

NASA Astrophysics Data System (ADS)

Wei, Zhenzhen; Fang, Xiaoyan; Miao, Mingsan

2018-01-01

With the rapid increase of cancer patients, chemotherapy is the main method for the clinical treatment of cancer, but also in the treatment of the adverse reactions--bone marrow suppression is often a serious infection caused by patients after chemotherapy and the important cause of mortality. Chinese medicine has obvious advantages in the prevention and treatment of bone marrow depression after chemotherapy. According to tumor bone marrow suppression after chemotherapy of etiology and pathogenesis of traditional Chinese medicine and China national knowledge internet nearly 10 years of traditional Chinese medicine in the prevention and control of the status of clinical and laboratory research of tumor bone marrow suppression, the author analyzed and summarized its characteristics, so as to provide the basis for treating bone marrow suppression of drug research and development, and promote small adverse reactions of the development and utilization of natural medicine and its preparations.

Electromyographic evaluation in children orthodontically treated for skeletal Class II malocclusion: Comparison of two treatment techniques.

PubMed

Ortu, Eleonora; Pietropaoli, Davide; Adib, Fray; Masci, Chiara; Giannoni, Mario; Monaco, Annalisa

2017-11-16

Objective To compare the clinical efficacy of two techniques for fabricating a Bimler device by assessing the patient's surface electromyography (sEMG) activity at rest before treatment and six months after treatment. Methods Twenty-four patients undergoing orthodontic treatment were enrolled in the study; 12 formed the test group and wore a Bimler device fabricated with a Myoprint impression using neuromuscular orthodontic technique and 12 formed the control group and were treated by traditional orthodontic technique with a wax bite in protrusion. The "rest" sEMG of each patient was recorded prior to treatment and six months after treatment. Results The neuromuscular-designed Bimler device was more comfortable and provided better treatment results than the traditional Bimler device. Conclusion This study suggests that the patient group subjected to neuromuscular orthodontic treatment had a treatment outcome with more relaxed masticatory muscles and better function versus the traditional orthodontic treatment.

The use of a resource-based relative value scale (RBRVS) to determine practice expense costs: a novel technique of practice management for the vascular surgeon.

PubMed

Mabry, C D

2001-03-01

Vascular surgeons have had to contend with rising costs while their reimbursements have undergone steady reductions. The use of newer accounting techniques can help vascular surgeons better manage their practices, plan for future expansion, and control costs. This article reviews traditional accounting methods, together with activity-based costing (ABC) principles that have been used in the past for practice expense analysis. The main focus is on a new technique-resource-based costing (RBC)-which uses the widely available Resource-Based Relative Value Scale (RBRVS) as its basis. The RBC technique promises easier implementation as well as more flexibility in determining true costs of performing various procedures, as opposed to more traditional accounting methods. It is hoped that RBC will assist vascular surgeons in coping with decreasing reimbursement. Copyright 2001 by W.B. Saunders Company

VOLATILE CONSTITUENTS OF GINGER OIL PREPARED ACCORDING TO IRANIAN TRADITIONAL MEDICINE AND CONVENTIONAL METHOD: A COMPARATIVE STUDY.

PubMed

Shirooye, Pantea; Mokaberinejad, Roshanak; Ara, Leila; Hamzeloo-Moghadam, Maryam

2016-01-01

Herbal medicines formulated as oils were believed to possess more powerful effects than their original plants in Iranian Traditional Medicine (ITM). One of the popular oils suggested for treatment of various indications was ginger oil. In the present study, to suggest a more convenient method of oil preparation (compared to the traditional method), ginger oil has been prepared according to both the traditional and conventional maceration methods and the volatile oil constituents have been compared. Ginger oil was obtained in sesame oil according to both the traditional way and the conventional (maceration) methods. The volatile oil of dried ginger and both oils were obtained by hydro-distillation and analyzed by gas chromatography/mass spectroscopy. Fifty five, fifty nine and fifty one components consisting 94 %, 94 % and 98 % of the total compounds were identified in the volatile oil of ginger, traditional and conventional oils, respectively. The most dominant compounds of the traditional and conventional oils were almost similar; however they were different from ginger essential oil which has also been to possess limited amounts of anti-inflammatory components. It was concluded that ginger oil could be prepared through maceration method and used for indications mentioned in ITM.

Rehabilitation for the management of knee osteoarthritis using comprehensive traditional Chinese medicine in community health centers: study protocol for a randomized controlled trial.

PubMed

Yan, Hu; Su, Youxin; Chen, Lidian; Zheng, Guohua; Lin, Xueyi; Chen, Baojun; Zhou, Bihong; Zhang, Qing

2013-11-04

It is becoming increasingly necessary for community health centers to make rehabilitation services available to patients with osteoarthritis of the knee. However, for a number of reasons, including a lack of expertise, the small size of community health centers and the availability of only simple medical equipment, conventional rehabilitation therapy has not been widely used in China. Consequently, most patients with knee osteoarthritis seek treatment in high-grade hospitals. However, many patients cannot manage the techniques that they were taught in the hospital. Methods such as acupuncture, tuina, Chinese medical herb fumigation-washing and t'ai chi are easy to do and have been reported to have curative effects in those with knee osteoarthritis. To date, there have been no randomized controlled trials validating comprehensive traditional Chinese medicine for the rehabilitation of knee osteoarthritis in a community health center. Furthermore, there is no standard rehabilitation protocol using traditional Chinese medicine for knee osteoarthritis. The aim of the current study is to develop a comprehensive rehabilitation protocol using traditional Chinese medicine for the management of knee osteoarthritis in a community health center. This will be a randomized controlled clinical trial with blinded assessment. There will be a 4-week intervention utilizing rehabilitation protocols from traditional Chinese medicine and conventional therapy. Follow-up will be conducted for a period of 12 weeks. A total of 722 participants with knee osteoarthritis will be recruited. Participants will be randomly divided into two groups: experimental and control. Primary outcomes will include range of motion, girth measurement, the visual analogue scale, and results from the manual muscle, six-minute walking and stair-climbing tests. Secondary outcomes will include average daily consumption of pain medication, ability to perform daily tasks and health-related quality-of-life assessments. Other outcomes will include rate of adverse events and economic effects. Relative cost-effectiveness will be determined from health service usage and outcome data. The primary aim of this trial is to develop a standard protocol for traditional Chinese medicine, which can be adopted by community health centers in China and worldwide, for the rehabilitation of patients with knee osteoarthritis. ChiCTR-TRC-12002538.

Comparison of traditional trigger tool to data warehouse based screening for identifying hospital adverse events.

PubMed

O'Leary, Kevin J; Devisetty, Vikram K; Patel, Amitkumar R; Malkenson, David; Sama, Pradeep; Thompson, William K; Landler, Matthew P; Barnard, Cynthia; Williams, Mark V

2013-02-01

Research supports medical record review using screening triggers as the optimal method to detect hospital adverse events (AE), yet the method is labour-intensive. This study compared a traditional trigger tool with an enterprise data warehouse (EDW) based screening method to detect AEs. We created 51 automated queries based on 33 traditional triggers from prior research, and then applied them to 250 randomly selected medical patients hospitalised between 1 September 2009 and 31 August 2010. Two physicians each abstracted records from half the patients using a traditional trigger tool and then performed targeted abstractions for patients with positive EDW queries in the complementary half of the sample. A third physician confirmed presence of AEs and assessed preventability and severity. Traditional trigger tool and EDW based screening identified 54 (22%) and 53 (21%) patients with one or more AE. Overall, 140 (56%) patients had one or more positive EDW screens (total 366 positive screens). Of the 137 AEs detected by at least one method, 86 (63%) were detected by a traditional trigger tool, 97 (71%) by EDW based screening and 46 (34%) by both methods. Of the 11 total preventable AEs, 6 (55%) were detected by traditional trigger tool, 7 (64%) by EDW based screening and 2 (18%) by both methods. Of the 43 total serious AEs, 28 (65%) were detected by traditional trigger tool, 29 (67%) by EDW based screening and 14 (33%) by both. We found relatively poor agreement between traditional trigger tool and EDW based screening with only approximately a third of all AEs detected by both methods. A combination of complementary methods is the optimal approach to detecting AEs among hospitalised patients.

Efficacy of E-Learning via the Website of Tehran University of Medical Sciences for Diagnosing Tooth Discolorations and Treatment Planning by Senior Dental Students.

PubMed

Hashemikamangar, Sedighe Sadat; Yazdanpanah, Farnoosh; Mirzaii, Mansoore; Yazdani, Reza; Karazifard, Mohammad Javad; Yasini, Esmaeil

2016-08-01

The efficacy of methods like e-learning as a supplement to traditional face-to-face instruction needs to be evaluated in dental courses. This study aimed to assess the efficacy of posting case presentations on one of the educational websites of  the virtual school of Tehran University of Medical Sciences called "SARMAD" to enhance the ability of senior dental students to diagnose tooth discolorations and offer treatment plans. This experimental study had a pre-test/post-test control group design and was conducted on 63 senior dental students. After filling out the primary questionnaire and obtaining a written informed consent, students participated in a pre-test and were then randomly divided into two groups of intervention and control. Fifteen case presentations were posted on the university website (SARMAD) during 6 weeks and discussed. Then, students participated in a post-test. Students' perspectives and their satisfaction with the website were assessed by a questionnaire. For ethical purposes, the same program was also offered to the controls. The post-test score was significantly higher than the pre-test score in the intervention group (P<0.001); but in the control group, the post-test score was only slightly higher than the pre-test score (P=0.128). In the intervention group, 70% stated that they would suggest this method as an efficient educational modality; 93.3% stated that this method would be beneficial as a supplement to conventional education; 16.7% ranked the SARMAD website excellent, 30% ranked it good, 33.3% acceptable, 16.7% moderate and 3.3 poor. It appears that this instructional modality may be efficiently used as a supplement to traditional instruction in undergraduate dental curricula.

False discovery rate control incorporating phylogenetic tree increases detection power in microbiome-wide multiple testing.

PubMed

Xiao, Jian; Cao, Hongyuan; Chen, Jun

2017-09-15

Next generation sequencing technologies have enabled the study of the human microbiome through direct sequencing of microbial DNA, resulting in an enormous amount of microbiome sequencing data. One unique characteristic of microbiome data is the phylogenetic tree that relates all the bacterial species. Closely related bacterial species have a tendency to exhibit a similar relationship with the environment or disease. Thus, incorporating the phylogenetic tree information can potentially improve the detection power for microbiome-wide association studies, where hundreds or thousands of tests are conducted simultaneously to identify bacterial species associated with a phenotype of interest. Despite much progress in multiple testing procedures such as false discovery rate (FDR) control, methods that take into account the phylogenetic tree are largely limited. We propose a new FDR control procedure that incorporates the prior structure information and apply it to microbiome data. The proposed procedure is based on a hierarchical model, where a structure-based prior distribution is designed to utilize the phylogenetic tree. By borrowing information from neighboring bacterial species, we are able to improve the statistical power of detecting associated bacterial species while controlling the FDR at desired levels. When the phylogenetic tree is mis-specified or non-informative, our procedure achieves a similar power as traditional procedures that do not take into account the tree structure. We demonstrate the performance of our method through extensive simulations and real microbiome datasets. We identified far more alcohol-drinking associated bacterial species than traditional methods. R package StructFDR is available from CRAN. chen.jun2@mayo.edu. Supplementary data are available at Bioinformatics online. © The Author (2017). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Prevention and Control Strategies to Counter Dengue Virus Infection

PubMed Central

Rather, Irfan A.; Parray, Hilal A.; Lone, Jameel B.; Paek, Woon K.; Lim, Jeongheui; Bajpai, Vivek K.; Park, Yong-Ha

2017-01-01

Dengue is currently the highest and rapidly spreading vector-borne viral disease, which can lead to mortality in its severe form. The globally endemic dengue poses as a public health and economic challenge that has been attempted to suppress though application of various prevention and control techniques. Therefore, broad spectrum techniques, that are efficient, cost-effective, and environmentally sustainable, are proposed and practiced in dengue-endemic regions. The development of vaccines and immunotherapies have introduced a new dimension for effective dengue control and prevention. Thus, the present study focuses on the preventive and control strategies that are currently employed to counter dengue. While traditional control strategies bring temporary sustainability alone, implementation of novel biotechnological interventions, such as sterile insect technique, paratransgenesis, and production of genetically modified vectors, has improved the efficacy of the traditional strategies. Although a large-scale vector control strategy can be limited, innovative vaccine candidates have provided evidence for promising dengue prevention measures. The use of tetravalent dengue vaccine (CYD-TDV) has been the most effective so far in treating dengue infections. Nonetheless, challenges and limitation hinder the progress of developing integrated intervention methods and vaccines; while the improvement in the latest techniques and vaccine formulation continues, one can hope for a future without the threat of dengue virus. PMID:28791258

Prevention and Control Strategies to Counter Dengue Virus Infection.

PubMed

Rather, Irfan A; Parray, Hilal A; Lone, Jameel B; Paek, Woon K; Lim, Jeongheui; Bajpai, Vivek K; Park, Yong-Ha

2017-01-01

Dengue is currently the highest and rapidly spreading vector-borne viral disease, which can lead to mortality in its severe form. The globally endemic dengue poses as a public health and economic challenge that has been attempted to suppress though application of various prevention and control techniques. Therefore, broad spectrum techniques, that are efficient, cost-effective, and environmentally sustainable, are proposed and practiced in dengue-endemic regions. The development of vaccines and immunotherapies have introduced a new dimension for effective dengue control and prevention. Thus, the present study focuses on the preventive and control strategies that are currently employed to counter dengue. While traditional control strategies bring temporary sustainability alone, implementation of novel biotechnological interventions, such as sterile insect technique, paratransgenesis, and production of genetically modified vectors, has improved the efficacy of the traditional strategies. Although a large-scale vector control strategy can be limited, innovative vaccine candidates have provided evidence for promising dengue prevention measures. The use of tetravalent dengue vaccine (CYD-TDV) has been the most effective so far in treating dengue infections. Nonetheless, challenges and limitation hinder the progress of developing integrated intervention methods and vaccines; while the improvement in the latest techniques and vaccine formulation continues, one can hope for a future without the threat of dengue virus.

Comparing student achievement in the problem-based learning classroom and traditional teaching methods classroom

NASA Astrophysics Data System (ADS)

Dobbs, Vicki

Significant numbers of students fail high school chemistry, preventing them from graduating. Starting in the 2013-2014 school year, 100% of the students must pass a science assessment for schools to meet Adequate Yearly Progress (AYP) in accordance to No Child Left Behind (NCLB). Failure to meet AYP results in sanctions, such as state management or closure of a school or replacing a school staff. The purpose of this study was to determine whether the teaching strategy, Problem Based Learning (PBL), will improve student achievement in high school chemistry to a greater degree than traditional teaching methods. PBL is a student-centered, inquiry-based teaching method based on the constructivist learning theory. The research question looked at whether there was a difference in student achievement between students a high school chemistry classroom using PBL and students in a classroom using traditional teaching methods as measured by scores on a 20-question quiz. The research study used a quasi-experimental pretest/posttest control group design. An independent samples t-test compared gains scores between the pretest and posttest. Analysis of quiz scores indicated that there was not a significant difference (t(171) = 1.001, p = .318) in student achievement between the teaching methods. Because there was not a significant difference, each teacher can decide which teaching method best suites the subject matter and the learning styles of the students. This study adds research based data to help teachers and schools choose one teaching method over another so that students may gain knowledge, develop problem-solving skills, and life-long learning skills that will bring about social change in the form of a higher quality of life for the students and community as a whole.

Source-based neurofeedback methods using EEG recordings: training altered brain activity in a functional brain source derived from blind source separation

PubMed Central

White, David J.; Congedo, Marco; Ciorciari, Joseph

2014-01-01

A developing literature explores the use of neurofeedback in the treatment of a range of clinical conditions, particularly ADHD and epilepsy, whilst neurofeedback also provides an experimental tool for studying the functional significance of endogenous brain activity. A critical component of any neurofeedback method is the underlying physiological signal which forms the basis for the feedback. While the past decade has seen the emergence of fMRI-based protocols training spatially confined BOLD activity, traditional neurofeedback has utilized a small number of electrode sites on the scalp. As scalp EEG at a given electrode site reflects a linear mixture of activity from multiple brain sources and artifacts, efforts to successfully acquire some level of control over the signal may be confounded by these extraneous sources. Further, in the event of successful training, these traditional neurofeedback methods are likely influencing multiple brain regions and processes. The present work describes the use of source-based signal processing methods in EEG neurofeedback. The feasibility and potential utility of such methods were explored in an experiment training increased theta oscillatory activity in a source derived from Blind Source Separation (BSS) of EEG data obtained during completion of a complex cognitive task (spatial navigation). Learned increases in theta activity were observed in two of the four participants to complete 20 sessions of neurofeedback targeting this individually defined functional brain source. Source-based EEG neurofeedback methods using BSS may offer important advantages over traditional neurofeedback, by targeting the desired physiological signal in a more functionally and spatially specific manner. Having provided preliminary evidence of the feasibility of these methods, future work may study a range of clinically and experimentally relevant brain processes where individual brain sources may be targeted by source-based EEG neurofeedback. PMID:25374520

Exploring Non-Traditional Learning Methods in Virtual and Real-World Environments

ERIC Educational Resources Information Center

Lukman, Rebeka; Krajnc, Majda

2012-01-01

This paper identifies the commonalities and differences within non-traditional learning methods regarding virtual and real-world environments. The non-traditional learning methods in real-world have been introduced within the following courses: Process Balances, Process Calculation, and Process Synthesis, and within the virtual environment through…

Space-Related Applications of Intelligent Control: Which Algorithm to Choose? (Theoretical Analysis of the Problem)

NASA Technical Reports Server (NTRS)

Kreinovich, Vladik

1996-01-01

For a space mission to be successful it is vitally important to have a good control strategy. For example, with the Space Shuttle it is necessary to guarantee the success and smoothness of docking, the smoothness and fuel efficiency of trajectory control, etc. For an automated planetary mission it is important to control the spacecraft's trajectory, and after that, to control the planetary rover so that it would be operable for the longest possible period of time. In many complicated control situations, traditional methods of control theory are difficult or even impossible to apply. In general, in uncertain situations, where no routine methods are directly applicable, we must rely on the creativity and skill of the human operators. In order to simulate these experts, an intelligent control methodology must be developed. The research objectives of this project were: to analyze existing control techniques; to find out which of these techniques is the best with respect to the basic optimality criteria (stability, smoothness, robustness); and, if for some problems, none of the existing techniques is satisfactory, to design new, better intelligent control techniques.

Substation Reactive Power Regulation Strategy

NASA Astrophysics Data System (ADS)

Zhang, Junfeng; Zhang, Chunwang; Ma, Daqing

2018-01-01

With the increasing requirements on the power supply quality and reliability of distribution network, voltage and reactive power regulation of substations has become one of the indispensable ways to ensure voltage quality and reactive power balance and to improve the economy and reliability of distribution network. Therefore, it is a general concern of the current power workers and operators that what kind of flexible and effective control method should be used to adjust the on-load tap-changer (OLTC) transformer and shunt compensation capacitor in a substation to achieve reactive power balance in situ, improve voltage pass rate, increase power factor and reduce active power loss. In this paper, based on the traditional nine-zone diagram and combining with the characteristics of substation, a fuzzy variable-center nine-zone diagram control method is proposed and used to make a comprehensive regulation of substation voltage and reactive power. Through the calculation and simulation of the example, this method is proved to have satisfactorily reconciled the contradiction between reactive power and voltage in real-time control and achieved the basic goal of real-time control of the substation, providing a reference value to the practical application of the substation real-time control method.

Validation of the tablet-administered Brief Assessment of Cognition (BAC App).

PubMed

Atkins, Alexandra S; Tseng, Tina; Vaughan, Adam; Twamley, Elizabeth W; Harvey, Philip; Patterson, Thomas; Narasimhan, Meera; Keefe, Richard S E

2017-03-01

Computerized tests benefit from automated scoring procedures and standardized administration instructions. These methods can reduce the potential for rater error. However, especially in patients with severe mental illnesses, the equivalency of traditional and tablet-based tests cannot be assumed. The Brief Assessment of Cognition in Schizophrenia (BACS) is a pen-and-paper cognitive assessment tool that has been used in hundreds of research studies and clinical trials, and has normative data available for generating age- and gender-corrected standardized scores. A tablet-based version of the BACS called the BAC App has been developed. This study compared performance on the BACS and the BAC App in patients with schizophrenia and healthy controls. Test equivalency was assessed, and the applicability of paper-based normative data was evaluated. Results demonstrated the distributions of standardized composite scores for the tablet-based BAC App and the pen-and-paper BACS were indistinguishable, and the between-methods mean differences were not statistically significant. The discrimination between patients and controls was similarly robust. The between-methods correlations for individual measures in patients were r>0.70 for most subtests. When data from the Token Motor Test was omitted, the between-methods correlation of composite scores was r=0.88 (df=48; p<0.001) in healthy controls and r=0.89 (df=46; p<0.001) in patients, consistent with the test-retest reliability of each measure. Taken together, results indicate that the tablet-based BAC App generates results consistent with the traditional pen-and-paper BACS, and support the notion that the BAC App is appropriate for use in clinical trials and clinical practice. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

The Impact of Community-Based Outreach on Psychological Distress and Victim Safety in Women Exposed to Intimate Partner Abuse

ERIC Educational Resources Information Center

DePrince, Anne P.; Labus, Jennifer; Belknap, Joanne; Buckingham, Susan; Gover, Angela

2012-01-01

Objective: Using a longitudinal, randomized controlled trial, this study assessed the impact of a community-based outreach versus a more traditional criminal justice system-based referral program on women's distress and safety following police-reported intimate partner abuse (IPA). Method: Women (N = 236 women) with police-reported IPA were…

The Effects of Project-Based Learning Activities on Academic Achievement and Motivation in Mathematics in Eighth-Grade Students

ERIC Educational Resources Information Center

Mudrich, Rachel Marie

2017-01-01

The purpose of this research study was to determine if project-based learning activities (PBLA) incorporated into an eighth-grade mathematics classroom have an effect on students' academic achievement and motivation toward learning. The control group used the traditional instruction method to cover mathematic objective skills that are Common Core…

Can Animations Effectively Substitute for Traditional Teaching Methods? Part II: Potential for Differentiated Learning

ERIC Educational Resources Information Center

Gregorius, Roberto Ma.; Santos, Rhodora; Dano, Judith B.; Gutierrez, Jose J.

2010-01-01

Animations were prepared using Adobe Flash MX and tested on elementary (3rd-5th grade) and secondary chemistry students. A pre- and post-test study was used to compare the learning gains of students who received the animations with those who received textbook reading time and discussion in class. The control and experimental groups were further…

A Comparison of Traditional and Holistic Instructional Methods in Developing Positive Attitudes Toward Mathematics Instruction in Students at Malcolm X College.

ERIC Educational Resources Information Center

Williams, Richard W.

The purpose of this study was to explore whether "holistic" instruction is an effective way to improve student attitudes toward instruction. Study participants were students in two Mathematics 111 classes at Malcolm X College (Illinois), 27 in the experimental and 27 in the control group. The experimental group received holistic…

The Effect of Project Based Learning on the Statistical Literacy Levels of Student 8th Grade

ERIC Educational Resources Information Center

Koparan, Timur; Güven, Bülent

2014-01-01

This study examines the effect of project based learning on 8th grade students' statistical literacy levels. A performance test was developed for this aim. Quasi-experimental research model was used in this article. In this context, the statistics were taught with traditional method in the control group and it was taught using project based…

The Effect on the 8th Grade Students' Attitude towards Statistics of Project Based Learning

ERIC Educational Resources Information Center

Koparan, Timur; Güven, Bülent

2014-01-01

This study investigates the effect of the project based learning approach on 8th grade students' attitude towards statistics. With this aim, an attitude scale towards statistics was developed. Quasi-experimental research model was used in this study. Following this model in the control group the traditional method was applied to teach statistics…

Traditional fertility regulation among the Yoruba of southwestern Nigeria. I. A study of prevalence, attitudes, practice and methods.

PubMed

Jinadu, M K; Olusi, S O; Ajuwon, B

1997-03-01

This study was conducted among Yoruba women and traditional healers with the aim of identifying and describing the practice, preparation, and administration of traditional contraceptives. The data were obtained in 1990 from a random sample of 1,400 women of childbearing age and 42 traditional healers in Nigeria's Oranmiyan area, using questionnaires and in-depth interviews. Findings revealed that knowledge of the traditional contraceptives is nearly universal among the Yoruba population, and the traditional contraceptive prevalence rate is 7.1 percent. The use of traditional contraceptives was significantly more common among uneducated women and among women aged 20 to 29 years old. Findings also revealed the existence of four main varieties of traditional contraceptive devices, the methods of preparation of the traditional contraceptives, varieties of herbal and animal products used, methods of administration, and taboos against usage. The easy accessibility of traditional medical practitioners and the belief that traditional contraceptive devices are devoid of complications, especially among those experienced with modern contraceptive devices, were the main reasons women cited for patronizing the traditional practitioners. The paper concludes with policy implications for family planning programmers in Nigeria.

An overview of distributed microgrid state estimation and control for smart grids.

PubMed

Rana, Md Masud; Li, Li

2015-02-12

Given the significant concerns regarding carbon emission from the fossil fuels, global warming and energy crisis, the renewable distributed energy resources (DERs) are going to be integrated in the smart grid. This grid can spread the intelligence of the energy distribution and control system from the central unit to the long-distance remote areas, thus enabling accurate state estimation (SE) and wide-area real-time monitoring of these intermittent energy sources. In contrast to the traditional methods of SE, this paper proposes a novel accuracy dependent Kalman filter (KF) based microgrid SE for the smart grid that uses typical communication systems. Then this article proposes a discrete-time linear quadratic regulation to control the state deviations of the microgrid incorporating multiple DERs. Therefore, integrating these two approaches with application to the smart grid forms a novel contributions in green energy and control research communities. Finally, the simulation results show that the proposed KF based microgrid SE and control algorithm provides an accurate SE and control compared with the existing method.

Application methods of infrared thermal images in the health care field of traditional Chinese medicine

NASA Astrophysics Data System (ADS)

Li, Ziru; Zhang, Xusheng

2008-12-01

Infrared thermal imaging (ITI) is the potential imaging technique for the health care field of traditional Chinese medicine (TCM). Successful application demands obeying the characteristics and regularity of the ITI of human body and designing rigorous trials. First, the influence of time must be taken into account as the ITI of human body varies with time markedly. Second, relative magnitude is preferred to be the index of the image features. Third, scatter diagrams and the method of least square could present important information for evaluating the health care effect. A double-blind placebo-controlled randomized trial was undertaken to study the influences of Shengsheng capsule, one of the TCM health food with immunity adjustment function, on the ITI of human body. The results showed that the effect of Shengsheng capsule to people with weak constitution or in the period of being weak could be reflected objectively by ITI. The relative efficacy rate was 81.3% for the trial group and 30.0% for the control group, there was significant difference between the two groups (P=0.003). So the sensitivity and objectivity of ITI are of great importance to the health care field of TCM.

An improved design method of a tuned mass damper for an in-service footbridge

NASA Astrophysics Data System (ADS)

Shi, Weixing; Wang, Liangkun; Lu, Zheng

2018-03-01

Tuned mass damper (TMD) has a wide range of applications in the vibration control of footbridges. However, the traditional engineering design method may lead to a mistuned TMD. In this paper, an improved TMD design method based on the model updating is proposed. Firstly, the original finite element model (FEM) is studied and the natural characteristics of the in-service or newly built footbridge is identified by field test, and then the original FEM is updated. TMD is designed according to the new updated FEM, and it is optimized according to the simulation on vibration control effects. Finally, the installation and field measurement of TMD are carried out. The improved design method can be applied to both in-service and newly built footbridges. This paper illustrates the improved design method with an engineering example. The frequency identification results of field test and original FEM show that there is a relatively large difference between them. The TMD designed according to the updated FEM has better vibration control effect than the TMD designed according to the original FEM. The site test results show that TMD has good effect on controlling human-induced vibrations.

Comparison of the efficacy of dispensing granules with traditional decoction: a systematic review and meta-analysis

PubMed Central

Qiu, Ruijin; Zhang, Xiaoyu; Zhao, Chen; Li, Min

2018-01-01

Background Dispensing granules have been developed for about 20 years. However, whether they are as effective as the traditional decoction kept unclear. This systematic review and meta-analysis was made to assess the efficacy of dispensing granules compared with traditional decoction. Methods We searched four databases since their inception to 9th September in 2016. Two authors independently identified trials, extracted data and assessed risk of bias with Cochrane Reviewer’s Handbook 5.0. We conducted meta-analysis with RevMan 5.1.0 software for eligible and appropriate trials. Results In the end, 7,035 participants from 51 randomized controlled trials (RCTs) which compared dispensing granules with traditional decoction were included in this systematic review. There were 33 different kinds of diseases for investigation, of which 8 RCTs observed common cold, 4 RCTs observed migraine. For rheumatoid arthritis, insomnia and hypertension, there were 3 RCTs reported respectively. The last RCTs reported different kinds of diseases in one or two trials. The majority of trials were in low methodological quality. Thirty-eight (74.5%) RCTs showed that the efficacy of dispensing granules were similar with traditional decoction, 6 (11.8%) RCTs reported that the therapeutic efficacy of dispensing granules were significantly better than traditional decoction. We conducted meta-analysis for 4 trials investigating patients with migraine. The results showed that dispensing granules reduced headache frequency by about 1.03 attacks per month as compared to traditional decoction. No evidence was found in terms of migraine intensity and duration. Conclusions The low quality of RCTs and conflicting results made it difficult to draw a definite conclusion. In the future, it needs much more evidence to explore the efficacy and safety of dispensing granules. N-of-1 trials and fuzzy comprehensive evaluation methods may be better choices for assessing the efficacy of them than RCTs. PMID:29610730

Can Facebook Be Used for Research? Experiences Using Facebook to Recruit Pregnant Women for a Randomized Controlled Trial.

PubMed

Adam, Laura M; Manca, Donna P; Bell, Rhonda C

2016-09-21

Recruitment is often a difficult and costly part of any human research study. Social media and other emerging means of mass communication hold promise as means to complement traditional strategies used for recruiting participants because they can reach a large number of people in a short amount of time. With the ability to target a specified audience, paid Facebook advertisements have potential to reach future research participants of a specific demographic. This paper describes the experiences of a randomized controlled trial in Edmonton, Alberta, attempting to recruit healthy pregnant women between 8 and 20 weeks' gestation for participation in a prenatal study. Various traditional recruitment approaches, in addition to paid Facebook advertisements were trialed. To evaluate the effectiveness of paid advertisements on Facebook as a platform for recruiting pregnant women to a randomized controlled trial in comparison with traditional recruitment approaches. Recruitment using traditional approaches occurred for 7 months, whereas Facebook advertisements ran for a total of 26 days. Interested women were prompted to contact the study staff for a screening call to determine study eligibility. Costs associated with each recruitment approach were recorded and used to calculate the cost to recruit eligible participants. Performance of Facebook advertisements was monitored using Facebook Ads Manager. Of the 115 women included, 39.1% (n=45) of the women who contacted study staff heard about the study through Facebook, whereas 60.9% (n=70) of them heard about it through traditional recruitment approaches. During the 215 days (~7 months) that the traditional approaches were used, the average rate of interest was 0.3 (0.2) women/day, whereas the 26 days of Facebook advertisements resulted in an average rate of interest of 2.8 (1.7) women/day. Facebook advertisements cost Can $506.91 with a cost per eligible participant of Cad $20.28. In comparison, the traditional approaches cost Cad $1087, with approximately Cad $24.15 per eligible participant. Demographic characteristics of women were similar between the 2 recruitment methods except that women recruited using Facebook were significantly earlier in their pregnancy than those recruited using traditional approaches (P<.03). Paid Facebook advertisements hold promise as a platform for reaching pregnant women. The relative ease of placing an advertisement, the comparable cost per participant recruited, and the dramatically improved recruitment rates in comparison with traditional approaches highlight the importance of combining novel and traditional recruitment approaches to recruit women for pregnancy-related studies. ClinicalTrials.gov NCT02711644; https://clinicaltrials.gov/ct2/show/NCT02711644 (Archived by WebCite at http://www.webcitation.org/6kKpagpMk).

Taguchi's off line method and Multivariate loss function approach for quality management and optimization of process parameters -A review

NASA Astrophysics Data System (ADS)

Bharti, P. K.; Khan, M. I.; Singh, Harbinder

2010-10-01

Off-line quality control is considered to be an effective approach to improve product quality at a relatively low cost. The Taguchi method is one of the conventional approaches for this purpose. Through this approach, engineers can determine a feasible combination of design parameters such that the variability of a product's response can be reduced and the mean is close to the desired target. The traditional Taguchi method was focused on ensuring good performance at the parameter design stage with one quality characteristic, but most products and processes have multiple quality characteristics. The optimal parameter design minimizes the total quality loss for multiple quality characteristics. Several studies have presented approaches addressing multiple quality characteristics. Most of these papers were concerned with maximizing the parameter combination of signal to noise (SN) ratios. The results reveal the advantages of this approach are that the optimal parameter design is the same as the traditional Taguchi method for the single quality characteristic; the optimal design maximizes the amount of reduction of total quality loss for multiple quality characteristics. This paper presents a literature review on solving multi-response problems in the Taguchi method and its successful implementation in various industries.

Using DNase Hi-C techniques to map global and local three-dimensional genome architecture at high resolution.

PubMed

Ma, Wenxiu; Ay, Ferhat; Lee, Choli; Gulsoy, Gunhan; Deng, Xinxian; Cook, Savannah; Hesson, Jennifer; Cavanaugh, Christopher; Ware, Carol B; Krumm, Anton; Shendure, Jay; Blau, C Anthony; Disteche, Christine M; Noble, William S; Duan, ZhiJun

2018-06-01

The folding and three-dimensional (3D) organization of chromatin in the nucleus critically impacts genome function. The past decade has witnessed rapid advances in genomic tools for delineating 3D genome architecture. Among them, chromosome conformation capture (3C)-based methods such as Hi-C are the most widely used techniques for mapping chromatin interactions. However, traditional Hi-C protocols rely on restriction enzymes (REs) to fragment chromatin and are therefore limited in resolution. We recently developed DNase Hi-C for mapping 3D genome organization, which uses DNase I for chromatin fragmentation. DNase Hi-C overcomes RE-related limitations associated with traditional Hi-C methods, leading to improved methodological resolution. Furthermore, combining this method with DNA capture technology provides a high-throughput approach (targeted DNase Hi-C) that allows for mapping fine-scale chromatin architecture at exceptionally high resolution. Hence, targeted DNase Hi-C will be valuable for delineating the physical landscapes of cis-regulatory networks that control gene expression and for characterizing phenotype-associated chromatin 3D signatures. Here, we provide a detailed description of method design and step-by-step working protocols for these two methods. Copyright © 2018 Elsevier Inc. All rights reserved.

Chaos control applied to cardiac rhythms represented by ECG signals

NASA Astrophysics Data System (ADS)

Borem Ferreira, Bianca; Amorim Savi, Marcelo; Souza de Paula, Aline

2014-10-01

The control of irregular or chaotic heartbeats is a key issue in cardiology. In this regard, chaos control techniques represent a good alternative since they suggest treatments different from those traditionally used. This paper deals with the application of the extended time-delayed feedback control method to stabilize pathological chaotic heart rhythms. Electrocardiogram (ECG) signals are employed to represent the cardiovascular behavior. A mathematical model is employed to generate ECG signals using three modified Van der Pol oscillators connected with time delay couplings. This model provides results that qualitatively capture the general behavior of the heart. Controlled ECG signals show the ability of the strategy either to control or to suppress the chaotic heart dynamics generating less-critical behaviors.

Design and experimental validation of a flutter suppression controller for the active flexible wing

NASA Technical Reports Server (NTRS)

Waszak, Martin R.; Srinathkumar, S.

1992-01-01

The synthesis and experimental validation of an active flutter suppression controller for the Active Flexible Wing wind tunnel model is presented. The design is accomplished with traditional root locus and Nyquist methods using interactive computer graphics tools and extensive simulation based analysis. The design approach uses a fundamental understanding of the flutter mechanism to formulate a simple controller structure to meet stringent design specifications. Experimentally, the flutter suppression controller succeeded in simultaneous suppression of two flutter modes, significantly increasing the flutter dynamic pressure despite modeling errors in predicted flutter dynamic pressure and flutter frequency. The flutter suppression controller was also successfully operated in combination with another controller to perform flutter suppression during rapid rolling maneuvers.

Success rate and complications of internal jugular vein catheterization with and without ultrasonography guide.

PubMed

Karimi-Sari, Hamidreza; Faraji, Mehrdad; Mohazzab Torabi, Saman; Asjodi, Gholamreza

2014-12-01

Central venous catheterization (CVC) is an important procedure in emergency departments (EDs). Despite existence of ultrasonography (US) devices in every ED, CVC is done using anatomical landmarks in many EDs in Iran. This study aimed to compare the traditional landmark method vs. US-guided method of CVC placement in terms of complications and success rate. In this randomized controlled trial, patients who were candidate for internal jugular vein catheterization, and referred to Baqiyatallah Hospital ED were randomly allocated into US-guided CVC and anatomical landmarks guided CVC groups. Central vein access time, number of attempts, success rate, and complications in each group were evaluated. Mann-Whitney U, chi-square and Fisher exact tests along with Pearson and Spearman correlation coefficients were used to analyze the data. Out of 100 patients, 56 were male and 44 were female. No significant differences were found between the US-guided and traditional landmark methods of CVC insertion in terms of age, gender, BMI, and site of catheter insertion. The mean access time was significantly lower in the US-guided group (37.12 ± 17.33 s vs. 63.42 ± 35.19 s, P < 0.001). The mean number of attempts was also significantly lower in the US-guided group (1.12 ± 0.3 vs. 1.58 ± 0.64 times, P < 0.001). Eighty-eight percent of patients in the US-guided group were catheterized in the first attempt, while 50% of patients in the traditional landmark group were catheterized in the second or more attempts (P < 0.001). The success rate was 100% in the US-guided group, while it was 88% in the landmark group (P = 0.013). Moreover, the rate of complications was significantly lower in the US-guided group (4% vs. 24%, P = 0.004). The US-guided method for CVC placement was superior to the traditional landmark method in terms of access time, number of attempts, success rate, and fewer complications.

Effect of different home-cooking methods on textural and nutritional properties of sweet potato genotypes grown in temperate climate conditions.

PubMed

Nicoletto, Carlo; Vianello, Fabio; Sambo, Paolo

2018-01-01

The European Union (EU) market for sweet potato is small but is growing considerably and and has increased by 100% over the last 5 years. The cultivation of sweet potato in temperate climate conditions has not considered extensively and could be a new opportunity for the EU market. Healthy and qualitative traits of different sweet potato cultivars grown in temperate climate conditions were evaluated in accordance with four cooking methods. Traditional cultivars showed high hardness and adhesiveness values. The highest concentrations of sugars (especially maltose) and phenolic acids (caffeic and chlorogenic) were found in samples treated by boiling and steaming. High antioxidant activity was found in fried potatoes. Qualitative traits of sweet potatoes treated by microwaves did not report any significant variation compared to the control. Traditional and new sweet potato cultivars can be cultivated in temperate climate conditions and show interesting qualitative properties, especially as a result of the presence of antioxidant compounds. Concerning global quality, colored varieties expressed a better profile than traditional Italian ones and they are suitable for the European market, giving new opportunities for consumers and producers. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

IFRP studies child-spacing trends in subSaharan Africa.

PubMed

1981-10-01

The IFRP (International Fertility Research Program) conducted in late 1980 a study of the changing patterns of breast feeding, postpartum abstinence, and use of modern contraceptive methods among women of reproductive age in Lagos, Nigeria, the largest city in tropical Africa. There is concern among family planning experts that the traditional child-spacing practices are breaking down in subSaharan Africa without being replaced sufficiently with modern fertility control methods. The household survey showed a total fertility rate of 6.56. Compared to the mean cumulative fertility of 6.19 for women aged 45-49, it appears that fertility is actually increasing in Lagos. There were low levels of awareness and practice of modern family planning methods reported by these women. Less than 1/4 were using a method of family planning currently. Of these, 7% were using a modern method (mostly pills), 3% were using a conventional method (condoms), and 14% were using only a traditional method. Many of these women did not consider either breast feeding or sexual abstinence as means of contraception. Breast feeding was practiced by 85% of the women during the 1st 2 months, with rates falling off sharply after that. Child spacing rather than fertility limitation was the motivation of most of the women practicing family planning.

Results of an integrated structure-control law design sensitivity analysis

NASA Technical Reports Server (NTRS)

Gilbert, Michael G.

1988-01-01

Next generation air and space vehicle designs are driven by increased performance requirements, demanding a high level of design integration between traditionally separate design disciplines. Interdisciplinary analysis capabilities have been developed, for aeroservoelastic aircraft and large flexible spacecraft control for instance, but the requisite integrated design methods are only beginning to be developed. One integrated design method which has received attention is based on hierarchal problem decompositions, optimization, and design sensitivity analyses. This paper highlights a design sensitivity analysis method for Linear Quadratic Cost, Gaussian (LQG) optimal control laws, which predicts change in the optimal control law due to changes in fixed problem parameters using analytical sensitivity equations. Numerical results of a design sensitivity analysis for a realistic aeroservoelastic aircraft example are presented. In this example, the sensitivity of the optimally controlled aircraft's response to various problem formulation and physical aircraft parameters is determined. These results are used to predict the aircraft's new optimally controlled response if the parameter was to have some other nominal value during the control law design process. The sensitivity results are validated by recomputing the optimal control law for discrete variations in parameters, computing the new actual aircraft response, and comparing with the predicted response. These results show an improvement in sensitivity accuracy for integrated design purposes over methods which do not include changess in the optimal control law. Use of the analytical LQG sensitivity expressions is also shown to be more efficient that finite difference methods for the computation of the equivalent sensitivity information.

[Ancient methods of animal disease prevention in Belgium].

PubMed

Mammerickx, M

1994-06-01

The author describes traditional methods of animal disease control in Belgium and the evolution of these methods up to the present time. Evidence is drawn mainly from Belgian law. The principles of hygienic prophylaxis, which have required little modification over the passage of time, were set out at the beginning of the 18th century by Lancisi and Bates, physicians to Pope Clement XI and King George I of Great Britain, respectively. These principles were immediately incorporated into Belgian law. However, it was not until the second half of the 19th century that they were applied correctly and with success.

[Impacts of collaborative teaching method on the teaching achievement of Acupuncture and Moxibustion].

PubMed

Tian, Haomei; Shen, Jing; Shi, Jia; Liu, Mi; Wang, Chao; Liu, Jinzhi; Chen, Chutao

2016-11-12

To explore the impacts of collaborative teaching method on the teaching achievement of Acupuncture and Moxibustion . Six classes in Hunan University of CM of 2012 grade Chinese medicine department were randomized into an observation group and a control group, 3 classes in each one. In the observation group, the collaborative teaching method was adopted, in which, different teaching modes were used according to the characteristics of each chapter and the study initiative of students was predominated. In the control group, the traditional teaching method was used, in which, the class teaching was the primary and the practice was the secondary in the section of techniques of acupuncture and moxibustion. The results of each curriculum and the total results were compared between the two groups during the whole semester. Compared with the control group, in the observation group, the total achievements of curriculum and case analysis combined with the total result of the theory examination were apparently improved (both P <0.01). The collaborative teaching method improves the comprehensive ability of students and provides a new approach to the teaching of Acupuncture and Moxibustion .

Electromagnetic Formation Flight (EMFF) for Sparse Aperture Arrays

NASA Technical Reports Server (NTRS)

Kwon, Daniel W.; Miller, David W.; Sedwick, Raymond J.

2004-01-01

Traditional methods of actuating spacecraft in sparse aperture arrays use propellant as a reaction mass. For formation flying systems, propellant becomes a critical consumable which can be quickly exhausted while maintaining relative orientation. Additional problems posed by propellant include optical contamination, plume impingement, thermal emission, and vibration excitation. For these missions where control of relative degrees of freedom is important, we consider using a system of electromagnets, in concert with reaction wheels, to replace the consumables. Electromagnetic Formation Flight sparse apertures, powered by solar energy, are designed differently from traditional propulsion systems, which are based on V. This paper investigates the design of sparse apertures both inside and outside the Earth's gravity field.

Etching radical controlled gas chopped deep reactive ion etching

DOEpatents

Olynick, Deidre; Rangelow, Ivo; Chao, Weilun

2013-10-01

A method for silicon micromachining techniques based on high aspect ratio reactive ion etching with gas chopping has been developed capable of producing essentially scallop-free, smooth, sidewall surfaces. The method uses precisely controlled, alternated (or chopped) gas flow of the etching and deposition gas precursors to produce a controllable sidewall passivation capable of high anisotropy. The dynamic control of sidewall passivation is achieved by carefully controlling fluorine radical presence with moderator gasses, such as CH.sub.4 and controlling the passivation rate and stoichiometry using a CF.sub.2 source. In this manner, sidewall polymer deposition thicknesses are very well controlled, reducing sidewall ripples to very small levels. By combining inductively coupled plasmas with controlled fluorocarbon chemistry, good control of vertical structures with very low sidewall roughness may be produced. Results show silicon features with an aspect ratio of 20:1 for 10 nm features with applicability to nano-applications in the sub-50 nm regime. By comparison, previous traditional gas chopping techniques have produced rippled or scalloped sidewalls in a range of 50 to 100 nm roughness.

An Evaluation of Teaching Introductory Geomorphology Using Computer-based Tools.

ERIC Educational Resources Information Center

Wentz, Elizabeth A.; Vender, Joann C.; Brewer, Cynthia A.

1999-01-01

Compares student reactions to traditional teaching methods and an approach where computer-based tools (GEODe CD-ROM and GIS-based exercises) were either integrated with or replaced the traditional methods. Reveals that the students found both of these tools valuable forms of instruction when used in combination with the traditional methods. (CMK)

Using Facebook™ to recruit college-age men for a Human Papillomavirus vaccine trial

PubMed Central

Raviotta, Jonathan M.; Nowalk, Mary Patricia; Lin, Chyongchiou Jeng; Huang, Hsin-Hui; Zimmerman, Richard K.

2015-01-01

Background College-age men were recruited using Facebook™ advertisements (ads), as well as traditional recruitment methods, for a randomized controlled trial to compare immunological responses to human papilloma virus (HPV) vaccine administered in two dosing schedules. This study compares enrollees who were recruited through traditional recruitment methods vs. social networking sites including Facebook™. Methods Potential participants were recruited using fliers posted on and off campus(es), and distributed at health fairs, classes, sporting and other campus events; e-mails to students and student organizations; and print advertisements in student newspapers and on city buses. Facebook™ ads were displayed to users with specific age, geographic, and interest characteristics; ads were monitored daily to make adjustments to improve response. Results 220 males, ages 18–25 years enrolled between October 2010 and May 2011. The majority of participants (51%) reported print advertisements as the method by which they first heard about the study, followed by personal contact (29%) and Facebook™ or other social networking site (SNS; 20%). The likelihood of SNS being the source by which the participant first heard about the study compared with traditional methods was increased if the participant reported: 1) being homosexual or bisexual; or 2) posting daily updates on SNS. Conclusions Facebook™ and other social networking sites are a viable recruitment strategy for reaching potential clinical trial participants among groups who typically use social media to stay connected with their friends and hard-to-reach groups such as young men who self-identify as homosexual or bisexual. PMID:25389213

The effectiveness of an integrated conceptual approach to teaching middle school science: A mixed methods investigation

NASA Astrophysics Data System (ADS)

Frampton, Susan K.

This study was designed to compare the effectiveness of using traditional and integrated instructional strategies to increase student understanding of the core concepts of energy. There are mixed messages in the literature as to the success of using an integrated approach to teach science content, despite suggestions its use improves student achievement and attitudes toward science. This study used a mixed-method approach. The quantitative portion was a quasi-experimental non-equivalent control group design, and the qualitative portion included teacher journals, teacher interviews and student journals. There were three teacher participants, two in the treatment group from a district in Sussex County, Delaware. The third teacher participant, from a different district in Sussex County, Delaware was in the control group. The treatment group consisted of 180 students and the control group consisted of 124 students. The results of this study show that the treatment group had significantly less anxiety in science following the treatment, than students in the control group. The F value of 10.89 was significant at p = 0.001. Students in the treatment group also had more enjoyment of and motivation in science than did students in the control group. The F value of 25.025 was significant at a p = 0.000 for the subscale enjoyment of science. The F value of 14.1 was significant at a p = 0.000 for the subscale of motivation in science. Students in the treatment group performed significantly better on the achievement tests, the Integrated Summative Energy Assessment (ISEA) and the science portion of the Delaware State Testing Program (DSTP). The treatment group performed significantly better on the ISEA than did the control group, with an F value of 407.7 significant at p = 0.000. The treatment group performed significantly better on the science DSTP than the control group, with an F value of 65.81 which was significant at p = 0.000. The use of an integrated approach to science instruction decreases student anxiety, increases enjoyment of science and motivation in science more than a traditional approach to teaching science. The use of an integrated approach to science instruction increases student achievement on extended response assessments that measure integrated conceptual knowledge and increases student achievement on traditional summative assessments.

[Establishment of design space for production process of traditional Chinese medicine preparation].

PubMed

Xu, Bing; Shi, Xin-Yuan; Qiao, Yan-Jiang; Wu, Zhi-Sheng; Lin, Zhao-Zhou

2013-03-01

The philosophy of quality by design (QbD) is now leading the changes in the drug manufacturing mode from the conventional test-based approach to the science and risk based approach focusing on the detailed research and understanding of the production process. Along with the constant deepening of the understanding of the manufacturing process, the design space will be determined, and the emphasis of quality control will be shifted from the quality standards to the design space. Therefore, the establishment of the design space is core step in the implementation of QbD, and it is of great importance to study the methods for building the design space. This essay proposes the concept of design space for the production process of traditional Chinese medicine (TCM) preparations, gives a systematic introduction of the concept of the design space, analyzes the feasibility and significance to build the design space in the production process of traditional Chinese medicine preparations, and proposes study approaches on the basis of examples that comply with the characteristics of traditional Chinese medicine preparations, as well as future study orientations.

Use of traditional contraceptive methods in India & its socio-demographic determinants.

PubMed

Ram, Faujdar; Shekhar, Chander; Chowdhury, Biswabandita

2014-11-01

The high use of traditional contraceptive methods may have health repercussions on both partners. High failure rate, lack of protection from sexually transmitted diseases are some of the examples of these repercussions. The aim of this study was to understand the level, trends, pattern, volume and socio-demographic determinants of using traditional contraceptive methods in the Indian context. Percentages, per cent distribution, cross-tabulation and multinomial logistic regression analyses were carried out. The data from the three rounds of National Family Health survey (NFHS) were used. The unit level District Level Household Survey (2007-2008) were mainly used to carry out the analysis in this paper. Marriage rates for States and Union Territories (UTs) were projected for the period of 2001-2011 to estimate the volume of traditional contraceptive users. These rates are required to get the number of eligible couples as on 2011 in the respective State/UT. The latest round of the District Level Household Survey (2007-2008) revealed that 6.7 per cent currently married women were using traditional contraceptive methods in India. More than half of the currently married women (56%) have ever used these methods. In terms of socio-demographic determinants, the odds ratios of using these methods were significantly higher for women aged 35 years and above, rural, Hindu, other than Scheduled Castes/Tribes (SCs/STs), secondary and above educated, non-poor, having two plus living children, and at least one surviving son in most of the states as well as at the national level. The northeastern region showed higher odds ratios (5 times) of women using traditional contraceptive methods than the southern region. A large number of currently married women have ever used the traditional contraceptive methods in India. On the basis of the findings from this study, the total size of those women who were using traditional methods and those who were having unmet need, and are required to use modern spacing methods of family planning in achieving the reproductive goals, is around 53 million. Women from a set of specific socio-demographic backgrounds are more likely to use these methods. A regional pattern has also emerged in use of tradition contraceptive methods in India.

Simultaneous Determination of Ten Constituents in Chaiqin Qingning Capsule by High-performance Liquid Chromatography Coupled with Triple-quadrupole Mass Spectrometry

PubMed Central

Li, Ting Yu; Huo, Xiao Kui; Zheng, Lu; Wang, Chao; Cong, Hai Jian; Xiang, Ting; Zhang, Lin; Zhang, Bao Jing; Huang, Shan Shan; Wu, Bin; Li, Xin Yu

2017-01-01

Background: Chaiqin Qingning Capsule (CQQNC) was a prescription of Traditional Chinese Medicine with the effects of clearing away heat and removing toxin, harmonizing the exterior and interior, it was widely used in Asian, for example, China and Japan, different batches of the raws materials and different processing time may be the vital factor which raised a challenge to control the quality of the CQQNC. Experimental Methods: In this experiment, a high-performance liquid chromatography-mass spectrometry/MS (HPLC-MS/MS) method was developed to simultaneously determine ten bioactive components for the quality control of CQQNC. Chromatographic separation was achieved using an XBridge BEH C18 column (150 mm × 4.6 mm, 2.5 μm) with a mobile phase composed of 10 mm aqueous ammonium acetate and acetonitrile using a gradient elution in 20 min. This study was conducted by multiple reaction monitoring mode through electrospray ionization resource with a negative ionization mode. Results: The established method was validated with good performance of precision, accuracy, stability, and reproducibility and was utilized to simultaneously quantify ten constituents of CQQNC obtained from seven different batches. Conclusion: It is the first time to report the rapid and simultaneous analysis of the ten compounds in CQQNC by HPLC-MS/MS and apply to determine 10 constituents in 7 batches of CQQNC bought from drug store in china. This method could be considered as good quality criteria to control the quality of CQQNC. SUMMARY In this paper, a simple, specific, and rapid high-performance liquid chromatogram coupled with triple-quadrupole mass spectrometry method for simultaneous quantification of ten constituents in Chaiqin Qingning Capsule has been developed for the first time. This method could be considered as good quality criteria to control the quality of CQQNC. Abbreviations used: CHM: Chinese herbal medicine; TCM: Traditional Chinese Medicine; CQQNC: Triple-quadrupole mass spectrometry Chaiqin Qingning Capsules; HPLC–MS/MS: High liquid chromatography equipped with tandem mass spectrometry; ESI: Electrospray ionization; DP: Declustering potential; CE: Collision energy; RSD: Relative standard deviation; LOD: Limit of detection; LOQ: Limit of quantity. PMID:29200714

The Impact of Team-Based Learning on Nervous System Examination Knowledge of Nursing Students.

PubMed

Hemmati Maslakpak, Masomeh; Parizad, Naser; Zareie, Farzad

2015-12-01

Team-based learning is one of the active learning approaches in which independent learning is combined with small group discussion in the class. This study aimed to determine the impact of team-based learning in nervous system examination knowledge of nursing students. This quasi-experimental study was conducted on 3(rd) grade nursing students, including 5th semester (intervention group) and 6(th) semester (control group). The traditional lecture method and the team-based learning method were used for educating the examination of the nervous system for intervention and control groups, respectively. The data were collected by a test covering 40-questions (multiple choice, matching, gap-filling and descriptive questions) before and after intervention in both groups. Individual Readiness Assurance Test (RAT) and Group Readiness Assurance Test (GRAT) used to collect data in the intervention group. In the end, the collected data were analyzed by SPSS ver. 13 using descriptive and inferential statistical tests. In team-based learning group, mean and standard deviation was 13.39 (4.52) before the intervention, which had been increased to 31.07 (3.20) after the intervention and this increase was statistically significant. Also, there was a statistically significant difference between the scores of RAT and GRAT in team-based learning group. Using team-based learning approach resulted in much better improvement and stability in the nervous system examination knowledge of nursing students compared to traditional lecture method; therefore, this method could be efficiently used as an effective educational approach in nursing education.

[Applications of mathematical statistics methods on compatibility researches of traditional Chinese medicines formulae].

PubMed

Mai, Lan-Yin; Li, Yi-Xuan; Chen, Yong; Xie, Zhen; Li, Jie; Zhong, Ming-Yu

2014-05-01

The compatibility of traditional Chinese medicines (TCMs) formulae containing enormous information, is a complex component system. Applications of mathematical statistics methods on the compatibility researches of traditional Chinese medicines formulae have great significance for promoting the modernization of traditional Chinese medicines and improving clinical efficacies and optimizations of formulae. As a tool for quantitative analysis, data inference and exploring inherent rules of substances, the mathematical statistics method can be used to reveal the working mechanisms of the compatibility of traditional Chinese medicines formulae in qualitatively and quantitatively. By reviewing studies based on the applications of mathematical statistics methods, this paper were summarized from perspective of dosages optimization, efficacies and changes of chemical components as well as the rules of incompatibility and contraindication of formulae, will provide the references for further studying and revealing the working mechanisms and the connotations of traditional Chinese medicines.

Quantifying relative importance: Computing standardized effects in models with binary outcomes

USGS Publications Warehouse

Grace, James B.; Johnson, Darren; Lefcheck, Jonathan S.; Byrnes, Jarrett E.K.

2018-01-01

Results from simulation studies show that both the LT and OE methods of standardization support a similarly-broad range of coefficient comparisons. The LT method estimates effects that reflect underlying latent-linear propensities, while the OE method computes a linear approximation for the effects of predictors on binary responses. The contrast between assumptions for the two methods is reflected in persistently weaker standardized effects associated with OE standardization. Reliance on standard deviations for standardization (the traditional approach) is critically examined and shown to introduce substantial biases when predictors are non-Gaussian. The use of relevant ranges in place of standard deviations has the capacity to place LT and OE standardized coefficients on a more comparable scale. As ecologists address increasingly complex hypotheses, especially those that involve comparing the influences of different controlling factors (e.g., top-down versus bottom-up or biotic versus abiotic controls), comparable coefficients become a necessary component for evaluations.

The analysis of transient noise of PCB P/G network based on PI/SI co-simulation

NASA Astrophysics Data System (ADS)

Haohang, Su

2018-02-01

With the frequency of the space camera become higher than before, the power noise of the imaging electronic system become the important factor. Much more power noise would disturb the transmissions signal, and even influence the image sharpness and system noise. "Target impedance method" is one of the traditional design method of P/G network (power and ground network), which is shorted of transient power noise analysis and often made "over design". In this paper, a new design method of P/G network is provided which simulated by PI/SI co-simulation. The transient power noise can be simulated and then applied in the design of noise reduction, thus effectively controlling the change of the noise in the P/G network. The method can efficiently control the number of adding decoupling capacitor, and is very efficient and feasible to keep the power integrity.

Using natural language processing to identify problem usage of prescription opioids.

PubMed

Carrell, David S; Cronkite, David; Palmer, Roy E; Saunders, Kathleen; Gross, David E; Masters, Elizabeth T; Hylan, Timothy R; Von Korff, Michael

2015-12-01

Accurate and scalable surveillance methods are critical to understand widespread problems associated with misuse and abuse of prescription opioids and for implementing effective prevention and control measures. Traditional diagnostic coding incompletely documents problem use. Relevant information for each patient is often obscured in vast amounts of clinical text. We developed and evaluated a method that combines natural language processing (NLP) and computer-assisted manual review of clinical notes to identify evidence of problem opioid use in electronic health records (EHRs). We used the EHR data and text of 22,142 patients receiving chronic opioid therapy (≥70 days' supply of opioids per calendar quarter) during 2006-2012 to develop and evaluate an NLP-based surveillance method and compare it to traditional methods based on International Classification of Disease, Ninth Edition (ICD-9) codes. We developed a 1288-term dictionary for clinician mentions of opioid addiction, abuse, misuse or overuse, and an NLP system to identify these mentions in unstructured text. The system distinguished affirmative mentions from those that were negated or otherwise qualified. We applied this system to 7336,445 electronic chart notes of the 22,142 patients. Trained abstractors using a custom computer-assisted software interface manually reviewed 7751 chart notes (from 3156 patients) selected by the NLP system and classified each note as to whether or not it contained textual evidence of problem opioid use. Traditional diagnostic codes for problem opioid use were found for 2240 (10.1%) patients. NLP-assisted manual review identified an additional 728 (3.1%) patients with evidence of clinically diagnosed problem opioid use in clinical notes. Inter-rater reliability among pairs of abstractors reviewing notes was high, with kappa=0.86 and 97% agreement for one pair, and kappa=0.71 and 88% agreement for another pair. Scalable, semi-automated NLP methods can efficiently and accurately identify evidence of problem opioid use in vast amounts of EHR text. Incorporating such methods into surveillance efforts may increase prevalence estimates by as much as one-third relative to traditional methods. Copyright © 2015. Published by Elsevier Ireland Ltd.

Optima XE Single Wafer High Energy Ion Implanter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Satoh, Shu; Ferrara, Joseph; Bell, Edward

2008-11-03

The Optima XE is the first production worthy single wafer high energy implanter. The new system combines a state-of-art single wafer endstation capable of throughputs in excess of 400 wafers/hour with a production-proven RF linear accelerator technology. Axcelis has been evolving and refining RF Linac technology since the introduction of the NV1000 in 1986. The Optima XE provides production worthy beam currents up to energies of 1.2 MeV for P{sup +}, 2.9 MeV for P{sup ++}, and 1.5 MeV for B{sup +}. Energies as low as 10 keV and tilt angles as high as 45 degrees are also available., allowingmore » the implanter to be used for a wide variety of traditional medium current implants to ensure high equipment utilization. The single wafer endstation provides precise implant angle control across wafer and wafer to wafer. In addition, Optima XE's unique dose control system allows compensation of photoresist outgassing effects without relying on traditional pressure-based methods. We describe the specific features, angle control and dosimetry of the Optima XE and their applications in addressing the ever-tightening demands for more precise process controls and higher productivity.« less

Integrating Genetic Studies of Nicotine Addiction into Public Health Practice: Stakeholder Views on Challenges, Barriers and Opportunities

PubMed Central

Dingel, M.J.; Hicks, A.D.; Robinson, M.E.; Koenig, B.A.

2011-01-01

Objective: Will emerging genetic research strengthen tobacco control programs? In this empirical study, we interview stakeholders in tobacco control to illuminate debates about the role of genomics in public health. Methods: The authors performed open-ended interviews with 86 stakeholders from 5 areas of tobacco control: basic scientists, clinicians, tobacco prevention specialists, health payers, and pharmaceutical industry employees. Interviews were qualitatively analyzed using standard techniques. Results: The central tension is between the hope that an expanding genomic knowledge base will improve prevention and smoking cessation therapies and the fear that genetic research might siphon resources away from traditional and proven public health programs. While showing strong support for traditional public health approaches to tobacco control, stakeholders recognize weaknesses, specifically the difficulty of countering the powerful voice of the tobacco industry when mounting public campaigns and the problem of individuals who are resistant to treatment and continue smoking. Conclusions: In order for genetic research to be effectively translated into efforts to minimize the harm of smoking-related disease, the views of key stakeholders must be voiced and disagreements reconciled. Effective translation requires honest evaluation of both the strengths and limitations of genetic approaches. PMID:21757875

Tailored Excitation for Frequency Response Measurement Applied to the X-43A Flight Vehicle

NASA Technical Reports Server (NTRS)

Baumann, Ethan

2007-01-01

An important aspect of any flight research project is assessing aircraft stability and flight control performance. In some programs this assessment is accomplished through the estimation of the in-flight vehicle frequency response. This estimation has traditionally been a lengthy task requiring separate swept sine inputs for each control axis at a constant flight condition. Hypersonic vehicles spend little time at any specific flight condition while they are decelerating. Accordingly, it is difficult to use traditional methods to calculate the vehicle frequency response and stability margins for this class of vehicle. A technique has been previously developed to significantly reduce the duration of the excitation input by tailoring the input to excite only the frequency range of interest. Reductions in test time were achieved by simultaneously applying tailored excitation signals to multiple control loops, allowing a quick estimate of the frequency response of a particular aircraft. This report discusses the flight results obtained from applying a tailored excitation input to the X-43A longitudinal and lateral-directional control loops during the second and third flights. The frequency responses and stability margins obtained from flight data are compared with preflight predictions.

Soft tissue deformation estimation by spatio-temporal Kalman filter finite element method.

PubMed

Yarahmadian, Mehran; Zhong, Yongmin; Gu, Chengfan; Shin, Jaehyun

2018-01-01

Soft tissue modeling plays an important role in the development of surgical training simulators as well as in robot-assisted minimally invasive surgeries. It has been known that while the traditional Finite Element Method (FEM) promises the accurate modeling of soft tissue deformation, it still suffers from a slow computational process. This paper presents a Kalman filter finite element method to model soft tissue deformation in real time without sacrificing the traditional FEM accuracy. The proposed method employs the FEM equilibrium equation and formulates it as a filtering process to estimate soft tissue behavior using real-time measurement data. The model is temporally discretized using the Newmark method and further formulated as the system state equation. Simulation results demonstrate that the computational time of KF-FEM is approximately 10 times shorter than the traditional FEM and it is still as accurate as the traditional FEM. The normalized root-mean-square error of the proposed KF-FEM in reference to the traditional FEM is computed as 0.0116. It is concluded that the proposed method significantly improves the computational performance of the traditional FEM without sacrificing FEM accuracy. The proposed method also filters noises involved in system state and measurement data.

Dehydration of Traditional Dried Instant Noodle (Mee Siput) Using Controlled Temperature & Humidity Dryer

NASA Astrophysics Data System (ADS)

Mamat, K. A.; Yusof, M. S.; Yusoff, Wan Fauziah Wan; Zulafif Rahim, M.; Hassan, S.; Rahman, M. Qusyairi. A.; Karim, M. A. Abd

2017-05-01

Drying process is an essential step to produce instant noodles. Yet, the industries especially Small and Medium Enterprises (SMEs), is seeking for an efficient method to dry the noodles. This paper discusses the performance of an invented drying system which employed heating and humidifying process. The drying system was tested using 30 kilogram of the raw noodle known as “Mee Siput”. Temperature controlled system were used in the study to control the temperature of the drying process and prevent the dried noodles from damage by maintaining the temperature of lower than 80°C. The analysis shows that the system was drastically decreased the humidity from 80% to 40% just after 200 minutes of the drying process. The complete dehydration time of noodle has also decreased to only 4 hours from 16 hours when using traditional drying system without sacrificed the good quality of the dried noodle. In overall, the invented system believed to increase the production capacity of the noodle, reduce cost of production which would highly beneficial for Small Medium Industries (SMEs) in Malaysia.