Training in quality and safety: the current landscape.

PubMed

Karasick, Andrew S; Nash, David B

2015-01-01

The current US health care environment requires and encourages the development and implementation of training programs focusing on quality improvement and patient safety. This article offers a new resource that details the basic characteristics of such physician-inclusive training programs. Specifically, program type, objectives, eligibility, cost, training length, and modality are aggregated and displayed to provide health care professionals with a new tool to facilitate individual education in the field of quality improvement and patient safety. © The Author(s) 2014.

Highway Maintenance Equipment Operator: Basic Core. Training Materials.

ERIC Educational Resources Information Center

Perky, Sandra Dutreau; And Others

This basic core curriculum is part of a three-part series of instructional guides designed for use in teaching a course in highway maintenance equipment operation. Addressed in the individual units of the curriculum, after an orientation unit, are safety; basic math; basic hand tools; procedures for loading. lashing, and unloading equipment;…

Food sanitation practices in restaurants of Ramallah and Al-Bireh district of Palestine.

PubMed

Al-Khatib, I A; Al-Mitwalli, S M

2009-01-01

Safe handling of food in restaurants is a basic element in the reduction of foodborne illness. We investigated knowledge and practices about food safety by food-handlers in restaurants in Ramallah and Al-Bireh district of Palestine. A high proportion of workers in the restaurants had no previous experience in other restaurants and 63.4% had received no training on food sanitation and safety. Most of the restaurants in the refugee camps, villages and towns had only 1 worker. Restaurants lacked basic conditions for food sanitation and safety, such as hot water in most and cleaning materials in some. Many workers had poor personal hygiene practices. Training is needed for restaurant owners and staff to improve food handling practices and standards.

Teach Children Fire Will Burn.

ERIC Educational Resources Information Center

Children's Bureau (DHEW), Washington, DC.

This handbook, addressed to parents and others responsible for the safety of children, presents information on fire hazards, prevention and protection. Emphasizing an early start to fire safety training, it outlines the basic facts of fire safety education, listing the most frequent causes of fire and suggesting the organization of a Family Fire…

Challenges in Developing Competency-based Training Curriculum for Food Safety Regulators in India.

PubMed

Thippaiah, Anitha; Allagh, Komal Preet; Murthy, G V

2014-07-01

The Food Safety and Standards Act have redefined the roles and responsibilities of food regulatory workforce and calls for highly skilled human resources as it involves complex management procedures. 1) Identify the competencies needed among the food regulatory workforce in India. 2) Develop a competency-based training curriculum for food safety regulators in the country. 3) Develop training materials for use to train the food regulatory workforce. The Indian Institute of Public Health, Hyderabad, led the development of training curriculum on food safety with technical assistance from the Royal Society for Public Health, UK and the National Institute of Nutrition, India. The exercise was to facilitate the implementation of new Act by undertaking capacity building through a comprehensive training program. A competency-based training needs assessment was conducted before undertaking the development of the training materials. THE TRAINING PROGRAM FOR FOOD SAFETY OFFICERS WAS DESIGNED TO COMPRISE OF FIVE MODULES TO INCLUDE: Food science and technology, Food safety management systems, Food safety legislation, Enforcement of food safety regulations, and Administrative functions. Each module has a facilitator guide for the tutor and a handbook for the participant. Essentials of Food Hygiene-I (Basic level), II and III (Retail/ Catering/ Manufacturing) were primarily designed for training of food handlers and are part of essential reading for food safety regulators. The Food Safety and Standards Act calls for highly skilled human resources as it involves complex management procedures. Despite having developed a comprehensive competency-based training curriculum by joint efforts by the local, national, and international agencies, implementation remains a challenge in resource-limited setting.

Food safety training for nutritionists.

PubMed Central

Crowther, J. S.; Cox, L. J.; Gross, R.; Käferstein, F. A.

1999-01-01

A course on food safety for nutritionists has been developed in Indonesia through collaboration between government, industry, academia and international agencies. By teaching the basic principles of the subject it equips the participants to recommend foods that are safe as well as nutritious. PMID:10083718

Challenges in Developing Competency-based Training Curriculum for Food Safety Regulators in India

PubMed Central

Thippaiah, Anitha; Allagh, Komal Preet; Murthy, G. V.

2014-01-01

Context: The Food Safety and Standards Act have redefined the roles and responsibilities of food regulatory workforce and calls for highly skilled human resources as it involves complex management procedures. Aims: 1) Identify the competencies needed among the food regulatory workforce in India. 2) Develop a competency-based training curriculum for food safety regulators in the country. 3) Develop training materials for use to train the food regulatory workforce. Settings and Design: The Indian Institute of Public Health, Hyderabad, led the development of training curriculum on food safety with technical assistance from the Royal Society for Public Health, UK and the National Institute of Nutrition, India. The exercise was to facilitate the implementation of new Act by undertaking capacity building through a comprehensive training program. Materials and Methods: A competency-based training needs assessment was conducted before undertaking the development of the training materials. Results: The training program for Food Safety Officers was designed to comprise of five modules to include: Food science and technology, Food safety management systems, Food safety legislation, Enforcement of food safety regulations, and Administrative functions. Each module has a facilitator guide for the tutor and a handbook for the participant. Essentials of Food Hygiene-I (Basic level), II and III (Retail/ Catering/ Manufacturing) were primarily designed for training of food handlers and are part of essential reading for food safety regulators. Conclusion: The Food Safety and Standards Act calls for highly skilled human resources as it involves complex management procedures. Despite having developed a comprehensive competency-based training curriculum by joint efforts by the local, national, and international agencies, implementation remains a challenge in resource-limited setting. PMID:25136155

Virtual Reality Simulation Training for Ebola Deployment.

PubMed

Ragazzoni, Luca; Ingrassia, Pier Luigi; Echeverri, Lina; Maccapani, Fabio; Berryman, Lizzy; Burkle, Frederick M; Della Corte, Francesco

2015-10-01

Both virtual and hybrid simulation training offer a realistic and effective educational framework and opportunity to provide virtual exposure to operational public health skills that are essential for infection control and Ebola treatment management. This training is designed to increase staff safety and create a safe and realistic environment where trainees can gain essential basic and advanced skills.

Fire Safety Training Handbook.

ERIC Educational Resources Information Center

Montgomery County Dept. of Fire and Rescue Services, Rockville, MD. Div. of Fire Prevention.

Designed for a community fire education effort, particularly in which local volunteers present general information on fire safety to their fellow citizens, this workbook contains nine lessons. Included are an overview of the household fire problem; instruction in basic chemistry and physics of fire, flammable liquids, portable fire extinguishers,…

The BEST Blueprint. Quality ABE in the Workplace.

ERIC Educational Resources Information Center

Westberry, Susan

The Basic Educational Skills Training (BEST) workplace literacy demonstration model was designed to provide adult basic education (ABE) services simultaneously for multiple employers in Maury County, Tennessee. The BEST model focused on job-related instruction. The goal of the program was to achieve increased safety, productivity, and employee…

Fight Bac! | Partnership for Food Safety Education

Science.gov Websites

Games & Activities School Lunches Free Resources Be Food Safe Resources Brand Assets Brochures & Spanish Free Resources For Consumers, Retailers and Educators The Four Core Practices Food Safety Basics workers and parents Free Resources The Core Four Food Poisoning Child Care Training schoolchildren Hands

46 CFR 15.1105 - Familiarization and basic training (BT).

Code of Federal Regulations, 2014 CFR

2014-10-01

... onboard about elementary safety matters and understand informational symbols, signs, and alarm signals concerning safety; (ii) Knows what to do if a person falls overboard; if fire or smoke is detected; or if the fire alarm or abandon-ship alarm sounds; (iii) Can identify stations for muster and embarkation, and...

PC Rider. A Training Manual. Training for Development. Peace Corps Information Collection & Exchange Training Manual No. T-36.

ERIC Educational Resources Information Center

Peace Corps, Washington, DC. Information Collection and Exchange Div.

This booklet provides information on safe motorcycle operation and accident prevention. Its special focus is on Peace Corps volunteers who operate motorcycles in West Africa. A discussion of how a motorcyclist can minimize risks focuses on the "invisible motorcycle" and basic safety precautions. A section with riding tips is divided…

Physical Training Injuries and Interventions for Military Recruits

DTIC Science & Technology

2012-05-01

increased risk (although not overuse injury risk) among professional football players and Marine officer candidates.16,22 Similarly, decreased or...combination of health care and fitness professionals for injury prevention , performance opti- mization, and musculoskeletal rehabilitation in IMT. At the...Training Injury Prevention Work Group, chartered by the Defense Safety Oversight Council, found insufficient evidence to recommend pre-Basic Training fit

Basic science curriculums in nuclear cardiology and cardiovascular imaging: evolving and emerging concepts.

PubMed

Van Decker, William A; Villafana, Theodore

2008-01-01

The teaching of basic science with regard to physics, instrumentation, and radiation safety has been part of nuclear cardiology training since its inception. Although there are clear educational and quality rationale for such, regulations associated with the Nuclear Regulatory Commission Subpart J of old 10 CFR section 35 (Title 10, Code of Federal Regulations, Part 35) from the 1960s mandated such prescriptive instruction. Cardiovascular fellowship training programs now have a new opportunity to rethink their basic science imaging curriculums with the era of "revised 10 CFR section 35" and the growing implementation of multimodality imaging training and expertise. This review focuses on the history and the why, what, and how of such a curriculum arising in one city and suggests examples of future implementation in other locations.

49 CFR 212.211 - Apprentice signal and train control inspector.

Code of Federal Regulations, 2010 CFR

2010-10-01

... RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STATE SAFETY PARTICIPATION REGULATIONS State... to use electrical test equipment in direct current and alternating current circuits; and (2) A basic...

Status of chemistry lab safety in Nepal.

PubMed

Kandel, Krishna Prasad; Neupane, Bhanu Bhakta; Giri, Basant

2017-01-01

Chemistry labs can become a dangerous environment for students as the lab exercises involve hazardous chemicals, glassware, and equipment. Approximately one hundred thousand students take chemistry laboratory classes annually in Nepal. We conducted a survey on chemical lab safety issues across Nepal. In this paper, we assess the safety policy and equipment, protocols and procedures followed, and waste disposal in chemistry teaching labs. Significant population of the respondents believed that there is no monitoring of the lab safety in their lab (p<0.001). Even though many labs do not allow food and beverages inside lab and have first aid kits, they lack some basic safety equipment. There is no institutional mechanism to dispose lab waste and chemical waste is disposed haphazardly. Majority of the respondents believed that the safety training should be a part of educational training (p = 0.001) and they would benefit from short course and/or workshop on lab safety (p<0.001).

Status of chemistry lab safety in Nepal

PubMed Central

Kandel, Krishna Prasad; Neupane, Bhanu Bhakta

2017-01-01

Chemistry labs can become a dangerous environment for students as the lab exercises involve hazardous chemicals, glassware, and equipment. Approximately one hundred thousand students take chemistry laboratory classes annually in Nepal. We conducted a survey on chemical lab safety issues across Nepal. In this paper, we assess the safety policy and equipment, protocols and procedures followed, and waste disposal in chemistry teaching labs. Significant population of the respondents believed that there is no monitoring of the lab safety in their lab (p<0.001). Even though many labs do not allow food and beverages inside lab and have first aid kits, they lack some basic safety equipment. There is no institutional mechanism to dispose lab waste and chemical waste is disposed haphazardly. Majority of the respondents believed that the safety training should be a part of educational training (p = 0.001) and they would benefit from short course and/or workshop on lab safety (p<0.001). PMID:28644869

The Battalion Commander’s Handbook, 1991

DTIC Science & Technology

1991-06-01

your battalion’s ARTEP and ATM requirements, read "How to Fight Manuals" FM’s 71-2, 25-100 and NTC 71-2, plus FM 25- series training FM 7-xx. o... risks in training. Tactics are basic, but training innovations and aggressiveness will make your battalion a winner. o Trust, check, and help...o Conduct a risk assessment of every training event you conduct. o Be unmerciful, uncompromising, unwavering and involved in safety at all times

Safety voice for ergonomics (SAVE) project: protocol for a workplace cluster-randomized controlled trial to reduce musculoskeletal disorders in masonry apprentices.

PubMed

Kincl, Laurel D; Anton, Dan; Hess, Jennifer A; Weeks, Douglas L

2016-04-27

Masons have the highest rate of overexertion injuries among all construction trades and rank second for occupational back injuries in the United States. Identified ergonomic solutions are the primary method of reducing exposure to risk factors associated with musculoskeletal disorders. However, many construction workers lack knowledge about these solutions, as well as basic ergonomic principles. Construction apprentices, as they embark on their careers, are greatly in need of ergonomics training to minimize the cumulative exposure that leads to musculoskeletal disorders. Apprentices receive safety training; however, ergonomics training is often limited or non-existent. In addition, apprenticeship programs often lack "soft skills" training on how to appropriately respond to work environments and practices that are unsafe. The SAVE program - SAfety Voice for Ergonomics - strives to integrate evidence-based health and safety training strategies into masonry apprenticeship skills training to teach ergonomics, problem solving, and speaking up to communicate solutions that reduce musculoskeletal injury risk. The central hypothesis is that the combination of ergonomics training and safety voice promotion will be more effective than no training or either ergonomics training alone or safety voice training alone. Following the development and pilot testing of the SAVE intervention, SAVE will be evaluated in a cluster-randomized controlled trial at 12 masonry training centers across the U.S. Clusters of apprentices within centers will be assigned at random to one of four intervention groups (n = 24 per group): (1) ergonomics training only, (2) safety voice training only, (3) combined ergonomics and safety voice training, or (4) control group with no additional training intervention. Outcomes assessed at baseline, at the conclusion of training, and then at six and 12 months post training will include: musculoskeletal symptoms, general health perceptions, knowledge of ergonomic and safety voice principles, and perception and attitudes about ergonomic and safety voice issues. Masons continue to have a high rate of musculoskeletal disorders. The trade has an expected increase of 40 % in the number of workers by 2020. Therefore, a vetted intervention for apprentices entering the trade, such as SAVE, could reduce the burden of musculoskeletal disorders currently plaguing the trade. ClinicalTrials.gov Identifier: NCT02676635 , 2 February 2016.

Basic life support training into cardiac rehabilitation programs: A chance to give back. A community intervention controlled manikin study.

PubMed

González-Salvado, Violeta; Abelairas-Gómez, Cristian; Peña-Gil, Carlos; Neiro-Rey, Carmen; Barcala-Furelos, Roberto; González-Juanatey, José Ramón; Rodríguez-Núñez, Antonio

2018-03-12

Early basic life support is crucial to enhance survival from out-of-hospital cardiac arrest but rates remain low, especially in households. High-risk groups' training has been advocated, but the optimal method is unclear. The CArdiac REhabilitation and BAsic life Support (CAREBAS) project aims to compare the effectiveness of two basic life support educational strategies implemented in a cardiac rehabilitation program. A community intervention study including consecutive patients enrolled on an exercise-based cardiac rehabilitation program after acute coronary syndrome or revascularization was conducted. A standard basic life support training (G-Stan) and a novel approach integrating cardiopulmonary resuscitation hands-on rolling refreshers (G-CPR) were randomly assigned to each group and compared. Basic life support performance was assessed by means of simulation at baseline, following brief instruction and after the 2-month program. 114 participants were included and 108 completed the final evaluation (G-Stan:58, G-CPR:50). Basic life support performance was equally poor at baseline and significantly improved following a brief instruction. A better skill retention was found after the 2-month program in G-CPR, significantly superior for safety and sending for an automated external defibrillator. Confidence and self-perceived preparation were also significantly greater in G-CPR after the program. Integrating cardiopulmonary resuscitation hands-on rolling refreshers in the training of an exercise-based cardiac rehabilitation program is feasible and improves patients' skill retention and confidence to perform a basic life support sequence, compared to conventional training. Exporting this formula to other programs may result in increased numbers of trained citizens, enhanced social awareness and bystander resuscitation. Copyright © 2018 Elsevier B.V. All rights reserved.

Criticality Safety Basics for INL FMHs and CSOs

DOE Office of Scientific and Technical Information (OSTI.GOV)

V. L. Putman

2012-04-01

Nuclear power is a valuable and efficient energy alternative in our energy-intensive society. However, material that can generate nuclear power has properties that require this material be handled with caution. If improperly handled, a criticality accident could result, which could severely harm workers. This document is a modular self-study guide about Criticality Safety Principles. This guide's purpose it to help you work safely in areas where fissionable nuclear materials may be present, avoiding the severe radiological and programmatic impacts of a criticality accident. It is designed to stress the fundamental physical concepts behind criticality controls and the importance of criticalitymore » safety when handling fissionable materials outside nuclear reactors. This study guide was developed for fissionable-material-handler and criticality-safety-officer candidates to use with related web-based course 00INL189, BEA Criticality Safety Principles, and to help prepare for the course exams. These individuals must understand basic information presented here. This guide may also be useful to other Idaho National Laboratory personnel who must know criticality safety basics to perform their assignments safely or to design critically safe equipment or operations. This guide also includes additional information that will not be included in 00INL189 tests. The additional information is in appendices and paragraphs with headings that begin with 'Did you know,' or with, 'Been there Done that'. Fissionable-material-handler and criticality-safety-officer candidates may review additional information at their own discretion. This guide is revised as needed to reflect program changes, user requests, and better information. Issued in 2006, Revision 0 established the basic text and integrated various programs from former contractors. Revision 1 incorporates operation and program changes implemented since 2006. It also incorporates suggestions, clarifications, and additional information from readers and from personnel who took course 00INL189. Revision 1 also completely reorganized the training to better emphasize physical concepts behind the criticality controls that fissionable material handlers and criticality safety officers must understand. The reorganization is based on and consistent with changes made to course 00INL189 due to a review of course exam results and to discussions with personnel who conduct area-specific training.« less

Prerequisite programs and food hygiene in hospitals: food safety knowledge and practices of food service staff in Ankara, Turkey.

PubMed

Bas, Murat; Temel, Mehtap Akçil; Ersun, Azmi Safak; Kivanç, Gökhan

2005-04-01

Our objective was to determine food safety practices related to prerequisite program implementation in hospital food services in Turkey. Staff often lack basic food hygiene knowledge. Problems of implementing HACCP and prerequisite programs in hospitals include lack of food hygiene management training, lack of financial resources, and inadequate equipment and environment.

100 years of occupational safety research: From basic protections and work analysis to a multilevel view of workplace safety and risk.

PubMed

Hofmann, David A; Burke, Michael J; Zohar, Dov

2017-03-01

Starting with initiatives dating back to the mid-1800s, we provide a high-level review of the key trends and developments in the application of applied psychology to the field of occupational safety. Factory laws, basic worker compensation, and research on accident proneness comprised much of the early work. Thus, early research and practice very much focused on the individual worker, the design of their work, and their basic protection. Gradually and over time, the focus began to navigate further into the organizational context. One of the early efforts to broaden beyond the individual worker was a significant focus on safety-related training during the middle of the 20th century. Toward the latter years of the 20th century and continuing the move from the individual worker to the broader organizational context, there was a significant increase in leadership and organizational climate (safety climate) research. Ultimately, this resulted in the development of a multilevel model of safety culture/climate. After discussing these trends, we identify key conclusions and opportunities for future research. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Industrial Hygiene Issues

NASA Technical Reports Server (NTRS)

Brisbin, Steven G.

1999-01-01

This breakout session is a traditional conference instrument used by the NASA industrial hygiene personnel as a method to convene personnel across the Agency with common interests. This particular session focused on two key topics, training systems and automation of industrial hygiene data. During the FY 98 NASA Occupational Health Benchmarking study, the training system under development by the U.S. Environmental Protection Agency (EPA) was deemed to represent a "best business practice." The EPA has invested extensively in the development of computer based training covering a broad range of safety, health and environmental topics. Currently, five compact disks have been developed covering the topics listed: Safety, Health and Environmental Management Training for Field Inspection Activities; EPA Basic Radiation Training Safety Course; The OSHA 600 Collateral Duty Safety and Health Course; and Key program topics in environmental compliance, health and safety. Mr. Chris Johnson presented an overview of the EPA compact disk-based training system and answered questions on its deployment and use across the EPA. This training system has also recently been broadly distributed across other Federal Agencies. The EPA training system is considered "public domain" and, as such, is available to NASA at no cost in its current form. Copies of the five CD set of training programs were distributed to each NASA Center represented in the breakout session. Mr. Brisbin requested that each NASA Center review the training materials and determine whether there is interest in using the materials as it is or requesting that EPA tailor the training modules to suit NASA's training program needs. The Safety, Health and Medical Services organization at Ames Research Center has completed automation of several key program areas. Mr. Patrick Hogan, Safety Program Manager for Ames Research Center, presented a demonstration of the automated systems, which are described by the following: (1) Safety, Health and Environmental Training. This system includes an assessment of training needs for every NASA Center organization, course descriptions, schedules and automated course scheduling, and presentation of training program metrics; (2) Safety and Health Inspection Information. This system documents the findings from each facility inspection, tracks abatement status on those findings and presents metrics on each department for senior management review; (3) Safety Performance Evaluation Profile. The survey system used by NASA to evaluate employee and supervisory perceptions of safety programs is automated in this system; and (4) Documentation Tracking System. Electronic archive and retrieval of all correspondence and technical reports generated by the Safety, Health and Medical Services Office are provided by this system.

A comparison of food safety knowledge among restaurant managers, by source of training and experience, in Oklahoma County, Oklahoma.

PubMed

Lynch, Robert A; Elledge, Brenda L; Griffith, Charles C; Boatright, Daniel T

2003-09-01

The annual incidence of illness related to food consumption continues to present a challenge to environmental health management. A significant fraction of cases have been attributed to consumption of food in restaurants, and as the number of meals eaten away from the home continues to rise, the potential for large-scale foodborne-disease outbreaks will continue to increase. Food handlers in retail establishments contribute to the incidence of foodborne disease; therefore, it is essential that workers and management staff have a thorough understanding of safe food practices. Since the training, certification, and experience of food service managers vary greatly, it is also likely that managers' knowledge base may differ. In the study reported here, restaurant managers were administered a survey designed to measure their understanding of basic food safety principles. The sources of training, certification, and experience were found to significantly affect the level of food safety knowledge; however, increased hours of training did not increase knowledge. In addition, the time lapsed since training did not significantly affect the level of knowledge.

[Human factors and crisis resource management: improving patient safety].

PubMed

Rall, M; Oberfrank, S

2013-10-01

A continuing high number of patients suffer harm from medical treatment. In 60-70% of the cases the sources of harm can be attributed to the field of human factors (HFs) and teamwork; nevertheless, those topics are still neither part of medical education nor of basic and advanced training even though it has been known for many years and it has meanwhile also been demonstrated for surgical specialties that training in human factors and teamwork considerably reduces surgical mortality.Besides the medical field, the concept of crisis resource management (CRM) has already proven its worth in many other industries by improving teamwork and reducing errors in the domain of human factors. One of the best ways to learn about CRM and HFs is realistic simulation team training with well-trained instructors in CRM and HF. The educational concept of the HOTT (hand over team training) courses for trauma room training offered by the DGU integrates these elements based on the current state of science. It is time to establish such training for all medical teams in emergency medicine and operative care. Accompanying safety measures, such as the development of a positive culture of safety in every department and the use of effective critical incident reporting systems (CIRs) should be pursued.

38 CFR 17.157 - Definition-adaptive equipment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... includes, but is not limited to, a basic automatic transmission, power steering, power brakes, power window lifts, power seats, air-conditioning equipment when necessary for the health and safety of the veteran... MEDICAL Automotive Equipment and Driver Training § 17.157 Definition-adaptive equipment. The term...

Electrician (AFSC 54250).

ERIC Educational Resources Information Center

Air Univ., Gunter AFS, Ala. Extension Course Inst.

This three-volume student text is designed for use by Air Force personnel enrolled in a self-study extension course for electricians. Covered in the individual volumes are general subjects (career progression, resource management, supervision and training, and safety and first aid); basic electricity and installation of electrical systems (basic…

42 CFR 65a.4 - What are the program requirements?

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Basic biological, chemical, and/or physical methods to reduce the amount and toxicity of these... occupational health and safety and in public health and engineering aspects of hazardous waste control; and/or (2) Graduate training in the geosciences, including hydrogeology, geological engineering, geophysics...

42 CFR 65a.4 - What are the program requirements?

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Basic biological, chemical, and/or physical methods to reduce the amount and toxicity of these... occupational health and safety and in public health and engineering aspects of hazardous waste control; and/or (2) Graduate training in the geosciences, including hydrogeology, geological engineering, geophysics...

42 CFR 65a.4 - What are the program requirements?

Code of Federal Regulations, 2010 CFR

2010-10-01

...) Basic biological, chemical, and/or physical methods to reduce the amount and toxicity of these... occupational health and safety and in public health and engineering aspects of hazardous waste control; and/or (2) Graduate training in the geosciences, including hydrogeology, geological engineering, geophysics...

42 CFR 65a.4 - What are the program requirements?

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Basic biological, chemical, and/or physical methods to reduce the amount and toxicity of these... occupational health and safety and in public health and engineering aspects of hazardous waste control; and/or (2) Graduate training in the geosciences, including hydrogeology, geological engineering, geophysics...

42 CFR 65a.4 - What are the program requirements?

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Basic biological, chemical, and/or physical methods to reduce the amount and toxicity of these... occupational health and safety and in public health and engineering aspects of hazardous waste control; and/or (2) Graduate training in the geosciences, including hydrogeology, geological engineering, geophysics...

Applying Combat Application Course Techniques to Rifle Marksmanship in Basic Combat Training (BCT): Acquisition and Retention of Skills

DTIC Science & Technology

2010-03-01

Uniform (interceptor body armor (IBA), load bearing vest (LBV), etc) • Weapons Safety • Fundamentals (Steady Position, Aiming, Breath Control, and...intent is that the Soldier must reacquire the target before he/she reengages; therefore, for safety considerations, the weapon is placed on “safe...Four rules of the range: A variation of the USMC Safety Rules as seen in MCRP 3- 01A (2001, para 3001, p. 3-1). o Treat the weapon as loaded. o Do

76 FR 21387 - National Institute of Environmental Health Sciences; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-15

... applications. Place: Hilton Garden Inn Durham Southpoint, 7007 Fayetteville Road, Durham, NC 27713. Contact....142, NIEHS Hazardous Waste Worker Health and Safety Training; 93.143, NIEHS Superfund Hazardous Substances--Basic Research and Education; 93.894, Resources and Manpower Development in the Environmental...

75 FR 13558 - National Institute of Environmental Health Sciences; Notice of Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-22

...: Hilton Garden Inn Durham Southpoint, 7007 Fayetteville Road, Durham, NC 27713. Contact Person: Leroy..., NIEHS Hazardous Waste Worker Health and Safety Training; 93.143, NIEHS Superfund Hazardous Substances--Basic Research and Education; 93.894, Resources and Manpower Development in the Environmental Health...

78 FR 26793 - National Institute of Environmental Health Sciences; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-08

... evaluate grant applications. Place: Hilton Garden Inn Durham Southpoint Hotel, 7007 Fayetteville Road...--Health Risks from Environmental Exposures; 93.142, NIEHS Hazardous Waste Worker Health and Safety Training; 93.143, NIEHS Superfund Hazardous Substances--Basic Research and Education; 93.894, Resources and...

A Wolf in Sheep's Clothing?

ERIC Educational Resources Information Center

Good, Geoff

1997-01-01

Safety qualifications for adventure education are not intended to prevent the enjoyment of adventure. Good training enables participants to avoid basic errors and tackle greater adventure sooner. Discusses the need to balance individual freedom with responsibility, and how the Lyme Bay canoeing deaths prompted increased concern in Great Britain…

Basic Program Elements for Federal employee Occupational Safety and Health Programs and related matters; Subpart I for Recordkeeping and Reporting Requirements. Final rule.

PubMed

2013-08-05

OSHA is issuing a final rule amending the Basic Program Elements to require Federal agencies to submit their occupational injury and illness recordkeeping information to the Bureau of Labor Statistics (BLS) and OSHA on an annual basis. The information, which is already required to be created and maintained by Federal agencies, will be used by BLS to aggregate injury and illness information throughout the Federal government. OSHA will use the information to identify Federal establishments with high incidence rates for targeted inspection, and assist in determining the most effective safety and health training for Federal employees. The final rule also interprets several existing basic program elements in our regulations to clarify requirements applicable to Federal agencies, amends the date when Federal agencies must submit to the Secretary of Labor their annual report on occupational safety and health programs, amends the date when the Secretary of Labor must submit to the President the annual report on Federal agency safety and health, and clarifies that Federal agencies must include uncompensated volunteers when reporting and recording occupational injuries and illnesses.

Balancing Safety and Economy.

ERIC Educational Resources Information Center

Leeds, Robin L.

1999-01-01

Administrators looking for budget relief might look for cost savings in pupil transportation. The basic school bus that meets federal standards, with no optional equipment, is the safest vehicle on the road. The best investment in a transportation program is driver training. Route and schedule changes might lead to an increase in efficiency…

76 FR 27653 - National Institute of Environmental Health Sciences; Notice of Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-12

... Southpoint, 7007 Fayetteville Road, Durham, NC 27713. Contact Person: Linda K. Bass, PhD, Scientific Review... Estimation--Health Risks from Environmental Exposures; 93.142, NIEHS Hazardous Waste Worker Health and Safety Training; 93.143, NIEHS Superfund Hazardous Substances--Basic Research and Education; 93.894, Resources and...

77 FR 43849 - National Institute of Environmental Health Sciences; Notice of Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-26

... applications. Place: Hilton Garden Inn Durham Southpoint, 7007 Fayetteville Road, Durham, NC 27713. Contact... Waste Worker Health and Safety Training; 93.143, NIEHS Superfund Hazardous Substances--Basic Research and Education; 93.894, Resources and Manpower Development in the Environmental Health Sciences; 93.113...

Principles of Pesticide Use, Handling, and Application: Instructional Modules for Vocational Agriculture Education. Student Manual.

ERIC Educational Resources Information Center

Ellis Associates, Inc., College Park, MD.

This training package is designed to present the basic principles of pesticide use, handling, and application. Included in this package is information on federal laws and regulations, personal safety, environmental implications, storage and disposal considerations, proper application procedures, and fundamentals of pest management. Successful…

Principles of Pesticide Use, Handling, and Application: Instructional Modules for Vocational Agriculture Education. Teacher Manual.

ERIC Educational Resources Information Center

Ellis Associates, Inc., College Park, MD.

The training package is designed to present the basic principles of pesticide use, handling, and application. Included in this package is information on Federal laws and regulations, personal safety, environmental implications, storage and disposal considerations, proper application procedures, and fundamentals of pest management. Successful…

Technology Staff-Development and Support Programs: Applying Abraham Maslow's Hierarchy of Needs.

ERIC Educational Resources Information Center

Bailey, Gerald D.; Pownell, David

1998-01-01

Presents Abraham Maslow's hierarchy of needs (physiological, safety, belonging, esteem, self-actualization) as a model for developing technology training and support for teachers, identifies basic technology-related needs that must be met before higher levels of technology integration can be achieved, and offers seven implications to help…

Application of a model for delivering occupational safety and health to smaller businesses: Case studies from the US

PubMed Central

Cunningham, Thomas R.; Sinclair, Raymond

2015-01-01

Smaller firms are the majority in every industry in the US, and they endure a greater burden of occupational injuries, illnesses, and fatalities than larger firms. Smaller firms often lack the necessary resources for effective occupational safety and health activities, and many require external assistance with safety and health programming. Based on previous work by researchers in Europe and New Zealand, NIOSH researchers developed for occupational safety and health intervention in small businesses. This model was evaluated with several intermediary organizations. Four case studies which describe efforts to reach small businesses with occupational safety and health assistance include the following: trenching safety training for construction, basic compliance and hazard recognition for general industry, expanded safety and health training for restaurants, and fall prevention and respirator training for boat repair contractors. Successful efforts included participation by the initiator among the intermediaries’ planning activities, alignment of small business needs with intermediary offerings, continued monitoring of intermediary activities by the initiator, and strong leadership for occupational safety and health among intermediaries. Common challenges were a lack of resources among intermediaries, lack of opportunities for in-person meetings between intermediaries and the initiator, and balancing the exchanges in the initiator–intermediary–small business relationships. The model offers some encouragement that initiator organizations can contribute to sustainable OSH assistance for small firms, but they must depend on intermediaries who have compatible interests in smaller businesses and they must work to understand the small business social system. PMID:26300585

Application of a model for delivering occupational safety and health to smaller businesses: Case studies from the US.

PubMed

Cunningham, Thomas R; Sinclair, Raymond

2015-01-01

Smaller firms are the majority in every industry in the US, and they endure a greater burden of occupational injuries, illnesses, and fatalities than larger firms. Smaller firms often lack the necessary resources for effective occupational safety and health activities, and many require external assistance with safety and health programming. Based on previous work by researchers in Europe and New Zealand, NIOSH researchers developed for occupational safety and health intervention in small businesses. This model was evaluated with several intermediary organizations. Four case studies which describe efforts to reach small businesses with occupational safety and health assistance include the following: trenching safety training for construction, basic compliance and hazard recognition for general industry, expanded safety and health training for restaurants, and fall prevention and respirator training for boat repair contractors. Successful efforts included participation by the initiator among the intermediaries' planning activities, alignment of small business needs with intermediary offerings, continued monitoring of intermediary activities by the initiator, and strong leadership for occupational safety and health among intermediaries. Common challenges were a lack of resources among intermediaries, lack of opportunities for in-person meetings between intermediaries and the initiator, and balancing the exchanges in the initiator-intermediary-small business relationships. The model offers some encouragement that initiator organizations can contribute to sustainable OSH assistance for small firms, but they must depend on intermediaries who have compatible interests in smaller businesses and they must work to understand the small business social system.

Private-public sector co-operation to improve pesticide safety standards in developing countries.

PubMed

Ellis, W W

1998-01-01

This paper draws on the author's experiences of the pilot phase of the Safe Use Project (SUP) in Thailand; this project is a part of a major GIFAP initiative carried out in some developing countries. The SUP's objectives were; i) to raise awareness and compliance in the safe handling and storage of pesticides within the industry, the medical profession and the end-users; ii) to reduce the incidence of pesticide poisoning; iii) to protect the environment; iiii) to help relevant government agencies with resources, expertise and training. To achieve those objectives, the SUP used local-language training resources, provided basic training, lobbied for changes in governmental policies and regulations, and acted as a focal point for pesticide safety-related information. The SUP targeted the whole distribution chain, from importer/formulator, through to the endusers. Also medical profession, teachers and school students were targeted. On the base of independent audit and surveys, a general improvement in awareness has been shown within targeted groups; a longer time frame is required to detect meaningful changes in farmer practice. The SUP key programmes have been: I) training of trainers, retailers and farmers; II) schools programme; III) medical training; IV) protective clothing; V) industry standards; VI) model farm. The main conclusions of the pilot phase were: i) pesticide safety needs to be addressed by all concerned agencies in a joint effort; ii) a rural development perspective must be adopted in improving pesticide safety; iii) integrated pest management training programmes must include precautionary advice for proper handling, use and disposal of pesticides, wherever these are necessary.

Development of a simulation model for dynamic derailment analysis of high-speed trains

NASA Astrophysics Data System (ADS)

Ling, Liang; Xiao, Xin-Biao; Jin, Xue-Song

2014-12-01

The running safety of high-speed trains has become a major concern of the current railway research with the rapid development of high-speed railways around the world. The basic safety requirement is to prevent the derailment. The root causes of the dynamic derailment of high-speed trains operating in severe environments are not easy to identify using the field tests or laboratory experiments. Numerical simulation using an advanced train-track interaction model is a highly efficient and low-cost approach to investigate the dynamic derailment behavior and mechanism of high-speed trains. This paper presents a three-dimensional dynamic model of a high-speed train coupled with a ballast track for dynamic derailment analysis. The model considers a train composed of multiple vehicles and the nonlinear inter-vehicle connections. The ballast track model consists of rails, fastenings, sleepers, ballasts, and roadbed, which are modeled by Euler beams, nonlinear spring-damper elements, equivalent ballast bodies, and continuous viscoelastic elements, in which the modal superposition method was used to reduce the order of the partial differential equations of Euler beams. The commonly used derailment safety assessment criteria around the world are embedded in the simulation model. The train-track model was then used to investigate the dynamic derailment responses of a high-speed train passing over a buckled track, in which the derailment mechanism and train running posture during the dynamic derailment process were analyzed in detail. The effects of train and track modelling on dynamic derailment analysis were also discussed. The numerical results indicate that the train and track modelling options have a significant effect on the dynamic derailment analysis. The inter-vehicle impacts and the track flexibility and nonlinearity should be considered in the dynamic derailment simulations.

Virtual reality in surgical skills training.

PubMed

Palter, Vanessa N; Grantcharov, Teodor P

2010-06-01

With recent concerns regarding patient safety, and legislation regarding resident work hours, it is accepted that a certain amount of surgical skills training will transition to the surgical skills laboratory. Virtual reality offers enormous potential to enhance technical and non-technical skills training outside the operating room. Virtual-reality systems range from basic low-fidelity devices to highly complex virtual environments. These systems can act as training and assessment tools, with the learned skills effectively transferring to an analogous clinical situation. Recent developments include expanding the role of virtual reality to allow for holistic, multidisciplinary team training in simulated operating rooms, and focusing on the role of virtual reality in evidence-based surgical curriculum design. Copyright 2010 Elsevier Inc. All rights reserved.

Applied Research on Laparoscopic Simulator in the Resident Surgical Laparoscopic Operation Technical Training.

PubMed

Fu, Shangxi; Liu, Xiao; Zhou, Li; Zhou, Meisheng; Wang, Liming

2017-08-01

The purpose of this study was to estimate the effects of surgical laparoscopic operation course on laparoscopic operation skills after the simulated training for medical students with relatively objective results via data gained before and after the practice course of laparoscopic simulator of the resident standardized trainees. Experiment 1: 20 resident standardized trainees with no experience in laparoscopic surgery were included in the inexperienced group and finished simulated cholecystectomy according to simulator videos. Simulator data was collected (total operation time, path length, average speed of instrument movement, movement efficiency, number of perforations, the time cautery is applied without appropriate contact with adhesions, number of serious complications). Ten attending doctors were included in the experienced group and conducted the operation of simulated cholecystectomy directly. Data was collected with simulator. Data of two groups was compared. Experiment 2: Participants in inexperienced group were assigned to basic group (receiving 8 items of basic operation training) and special group (receiving 8 items of basic operation training and 4 items of specialized training), and 10 persons for each group. They received training course designed by us respectively. After training level had reached the expected target, simulated cholecystectomy was performed, and data was collected. Experimental data between basic group and special group was compared and then data between special group and experienced group was compared. Results of experiment 1 showed that there is significant difference between data in inexperienced group in which participants operated simulated cholecystectomy only according to instructors' teaching and operation video and data in experienced group. Result of experiment 2 suggested that, total operation time, number of perforations, number of serious complications, number of non-cauterized bleeding and the time cautery is applied without appropriate contact with adhesions in special group were all superior to those in basic group. There was no statistical difference on other data between special group and basic group. Comparing special group with experienced group, data of total operation time and the time cautery is applied without appropriate contact with adhesions in experienced group was superior to that in special group. There was no statistical difference on other data between special group and experienced group. Laparoscopic simulators are effective for surgical skills training. Basic courses could mainly improve operator's hand-eye coordination and perception of sense of the insertion depth for instruments. Specialized training courses could not only improve operator's familiarity with surgeries, but also reduce operation time and risk, and improve safety.

Exploiting Science: Enhancing the Safety Training of Pilots to Reduce the Risk of Bird Strikes

NASA Astrophysics Data System (ADS)

Mendonca, Flavio A. C.

Analysis of bird strikes to aviation in the U.S. from 1990 to 2015 indicate that the successful mitigation efforts at airports, which must be sustained, have reduced incidents with damage and a negative effect-on-flight since 2000. However, such efforts have done little to reduce strikes outside the airport jurisdiction, such as occurred with US Airways Flight 1549 in 2009. There are basically three strategies to mitigate the risk of bird strikes: standards set by aviation authorities, technology, and actions by crewmembers. Pilots play an important role as stakeholders in the prevention of bird strikes, especially outside the airport environment. Thus, safety efforts require enhanced risk management and aeronautical decision-making training for flight crews. The purpose of this study was to determine if a safety training protocol could effectively enhance CFR Part 141 general aviation pilots' knowledge and skills to reduce the risk of bird strikes to aviation. Participants were recruited from the Purdue University professional flight program and from Purdue Aviation. The researcher of this study used a pretest posttest experimental design. Additionally, qualitative data were collected through open-ended questions in the pretest, posttest, and a follow-up survey questionnaire. The participants' pretest and posttest scores were analyzed using parametric and nonparametric tests. Results indicated a significant increase in the posttest scores of the experimental group. An investigation of qualitative data showed that the topic "safety management of bird hazards by pilots" is barely covered during the ground and flight training of pilots. Furthermore, qualitative data suggest a misperception of the safety culture tenets and a poor familiarity with the safety risk management process regarding bird hazards. Finally, the researcher presented recommendations for practice and future research.

Food hygiene training in small to medium-sized care settings.

PubMed

Seaman, Phillip; Eves, Anita

2008-10-01

Adoption of safe food handling practices is essential to effectively manage food safety. This study explores the impact of basic or foundation level food hygiene training on the attitudes and intentions of food handlers in care settings, using questionnaires based on the Theory of Planned Behaviour. Interviews were also conducted with food handlers and their managers to ascertain beliefs about the efficacy of, perceived barriers to, and relevance of food hygiene training. Most food handlers had undertaken formal food hygiene training; however, many who had not yet received training were preparing food, including high risk foods. Appropriate pre-training support and on-going supervision appeared to be lacking, thus limiting the effectiveness of training. Findings showed Subjective Norm to be the most significant influence on food handlers' intention to perform safe food handling practices, irrespective of training status, emphasising the role of important others in determining desirable behaviours.

29 CFR Appendix V to Part 1918 - Basic Elements of a First Aid Training Program (Non-mandatory)

Code of Federal Regulations, 2011 CFR

2011-07-01

...-mandatory) V Appendix V to Part 1918 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND...) Side Stress on Boom .66(b)(3)(i) Vessel's Permanent Equipment .55 Visible Defects .66(b)(3)(ii) Cups... Related Employments .2 River Towboat .2 Small Trimming Hatch .2 Vessel .2 Vessel's Cargo Handling Gear .2...

29 CFR Appendix V to Part 1918 - Basic Elements of a First Aid Training Program (Non-mandatory)

Code of Federal Regulations, 2012 CFR

2012-07-01

...-mandatory) V Appendix V to Part 1918 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND...) Side Stress on Boom .66(b)(3)(i) Vessel's Permanent Equipment .55 Visible Defects .66(b)(3)(ii) Cups... Related Employments .2 River Towboat .2 Small Trimming Hatch .2 Vessel .2 Vessel's Cargo Handling Gear .2...

Military Curriculum Materials for Vocational and Technical Education. Plumbing Specialist 3-2. Volume 1.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This individualized, self-paced course for independent study in plumbing was adapted from military curriculum materials for use in vocational education. The course provides the theory to accompany on-the-job training in the plumbing trade. It provides basic information on job safety and tools, waste systems, and water supply systems and fixtures.…

Filling the Frame. Adult Education and Vocational Training Institute Guidelines for the Implementation of Integrated Curricula within the Certificates of General Education for Adults Framework.

ERIC Educational Resources Information Center

New South Wales Dept. of Corrective Services, Sydney (Australia).

This document contains learning modules for adult basic education courses in Australia, along with teacher information for integrating curricula, using integrated themes, and planning curricula. The learning modules contain learning activities in the following areas: job search skills; occupational health and safety; life skills; ceramics;…

University education and nuclear criticality safety professionals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, R.E.; Stachowiak, R.V.; Knief, R.A.

1996-12-31

The problem of developing a productive criticality safety specialist at a nuclear fuel facility has long been with us. The normal practice is to hire a recent undergraduate or graduate degree recipient and invest at least a decade in on-the-job training. In the early 1980s, the U.S. Department of Energy (DOE) developed a model intern program in an attempt to speed up the process. The program involved working at assigned projects for extended periods at a working critical mass laboratory, a methods development group, and a fuel cycle facility. This never gained support as it involved extended time away frommore » the job. At the Rocky Flats Environmental Technology Site, the training method is currently the traditional one involving extensive experience. The flaw is that the criticality safety staff turnover has been such that few individuals continue for the decade some consider necessary for maturity in the discipline. To maintain quality evaluations and controls as well as interpretation decisions, extensive group review is used. This has proved costly to the site and professionally unsatisfying to the current staff. The site contractor has proposed a training program to remedy the basic problem.« less

An assessment of nursing staffs' knowledge of radiation protection and practice.

PubMed

Badawy, Mohamed Khaldoun; Mong, Kam Shan; Paul Lykhun, U; Deb, Pradip

2016-03-01

Although the exposure to nursing staff is generally lower than the allowable radiation worker dose limits, awareness and overcoming fears of radiation exposure is essential in order to perform routine activities in certain departments. Furthermore, the nursing staff, whether they are defined as radiation workers or not, must be able to respond to any radiological emergencies and provide care to any patient affected by radiation. This study aims to gauge the awareness of radiation safety among the nursing staff at a major hospital in different departments and recommend if further radiation safety training is required. A prospective multiple choice questionnaire was distributed to 200 nurses in 9 different departments. The questionnaire tested knowledge that would be taught at a basic radiation safety course. 147 nurses (74%) completed the survey with the average score of 40%. Furthermore, 85% of nurses surveyed felt there was a need for radiation safety training in their respective departments to assist with day to day work in the department. An increase in radiation safety materials that are specific to each department is recommended to assist with daily work involving radiation. Moreover, nursing staff that interact with radiation on a regular basis should undertake radiation safety courses before beginning employment and regular refresher courses should be made available thereafter.

[Learning from errors: applying aviation safety concepts to medicine].

PubMed

Sommer, K-J

2012-11-01

Health care safety levels range below other complex industries. Civil aviation has throughout its history developed methods and concepts that have made the airplane into one of the safest means of mass transport. Key elements are accident investigations that focus on cause instead of blame, human-centered design of machinery and processes, continuous training of all personnel and a shared safety culture. These methods and concepts can basically be applied to medicine which has successfully been achieved in certain areas, however, a comprehensive implementation remains to be completed. This applies particularly to including the topic of safety into relevant curricula. Physicians are obliged by the oath"primum nil nocere" to act, but economic as well as political pressure will eventually confine professional freedom if initiative is not taken soon.

A Scientific Rationale to Improve Resistance Training Prescription in Exercise Oncology.

PubMed

Fairman, Ciaran M; Zourdos, Michael C; Helms, Eric R; Focht, Brian C

2017-08-01

To date, the prevailing evidence in the field of exercise oncology supports the safety and efficacy of resistance training to attenuate many oncology treatment-related adverse effects, such as risk for cardiovascular disease, increased fatigue, and diminished physical functioning and quality of life. Moreover, findings in the extant literature supporting the benefits of exercise for survivors of and patients with cancer have resulted in the release of exercise guidelines from several international agencies. However, despite research progression and international recognition, current exercise oncology-based exercise prescriptions remain relatively basic and underdeveloped, particularly in regards to resistance training. Recent publications have called for a more precise manipulation of training variables such as volume, intensity, and frequency (i.e., periodization), given the large heterogeneity of a cancer population, to truly optimize clinically relevant patient-reported outcomes. Indeed, increased attention to integrating fundamental principles of exercise physiology into the exercise prescription process could optimize the safety and efficacy of resistance training during cancer care. The purpose of this article is to give an overview of the current state of resistance training prescription and discuss novel methods that can contribute to improving approaches to exercise prescription. We hope this article may facilitate further evaluation of best practice regarding resistance training prescription, monitoring, and modification to ultimately optimize the efficacy of integrating resistance training as a supportive care intervention for survivors or and patients with cancer.

A Historical Analysis of Crane Mishaps at Kennedy Space Center

NASA Technical Reports Server (NTRS)

Wolfe, Crystal

2014-01-01

Cranes and hoists are widely used in many areas. Crane accidents and handling mishaps are responsible for injuries, costly equipment damage, and program delays. Most crane accidents are caused by preventable factors. Understanding these factors is critical when designing cranes and preparing lift plans. Analysis of previous accidents provides insight into current recommendations for crane safety. Cranes and hoists are used throughout Kennedy Space Center to lift everything from machine components to critical flight hardware. Unless they are trained crane operators, most NASA employees and contractors do not need to undergo specialized crane training and may not understand the safety issues surrounding the use of cranes and hoists. A single accident with a crane or hoist can injure or kill people, cause severe equipment damage, and delay or terminate a program. Handling mishaps can also have a significant impact on the program. Simple mistakes like bouncing or jarring a load, or moving the crane down when it should go up, can damage fragile flight hardware and cause major delays in processing. Hazardous commodities (high pressure gas, hypergolic propellants, and solid rocket motors) can cause life safety concerns for the workers performing the lifting operations. Most crane accidents are preventable with the correct training and understanding of potential hazards. Designing the crane with human factors taken into account can prevent many accidents. Engineers are also responsible for preparing lift plans where understanding the safety issues can prevent or mitigate potential accidents. Cranes are widely used across many areas of KSC. Failure of these cranes often leads to injury, high damage costs, and significant delays in program objectives. Following a basic set of principles and procedures during design, fabrication, testing, regular use, and maintenance can significantly minimize many of these failures. As the accident analysis shows, load drops are often caused or influenced by human factors. Therefore, proper training and understanding of crane safety throughout the workforce is critical. It is important that the engineers designing the cranes, lift planners preparing the lift plans, operators performing the lifts, and training officers conducting the operator training all understand the problems that can happen with cranes and how to ensure the safety of the workforce and equipment being lifted.

Cockpit resource management training at People Express

NASA Technical Reports Server (NTRS)

Bruce, Keith D.; Jensen, Doug

1987-01-01

In January 1986 in a continuing effort to maintain and improve flight safety and solve some Cockpit Resource Management (CRM) problems, People Express implemented a new CRM training program. It is a continuously running program, scheduled over the next three years and includes state-of-the-art full-mission simulation (LOFT), semi-annual seminar workshops and a comprehensive academic program authored by Robert W. Mudge of Cockpit Management Resources Inc. That program is outlined and to maximize its contribution to the workshop's goals, is organized into four topic areas: (1) Program content: the essential elements of resource management training; (2) Training methods: the strengths and weaknesses of current approaches; (3) Implementation: the implementation of CRM training; and (4) Effectiveness: the effectiveness of training. It is confined as much as possible to concise descriptions of the program's basic components. Brief discussions of rationale are included, however no attempt is made to discuss or review popular CRM tenets or the supporting research.

Assessing the Food Safety Attitudes and Awareness of Managers of School Feeding Programmes in Mpumalanga, South Africa.

PubMed

Sibanyoni, J J; Tabit, F T

2017-08-01

The managers of school feeding programmes are responsible for ensuring the safety of the food which is provided to schoolchildren, but very few studies have been conducted on the food safety knowledge and awareness of these managers. The objective of this study is to evaluate the food safety attitudes and awareness of managers of the National School Nutrition Programme (NSNP) in schools in Mpumalanga, a province of South Africa. A cross-sectional survey study was conducted in which questionnaires were used to collect data from 300 NSNP food service managers. The majority of schools offering NSNP meals were located in informal settlements and most were found to lack basic resources such as electricity (power supplies to the food preparation facility) and potable tap water in their kitchens. No school was found to have implemented the hazard analysis and critical control points (HACCP) programme, and only a few staff had received food safety training. Food safety implementation is worst in informal schools in rural areas due to limited resources and infrastructure. The NSNP food service managers in some schools-especially those located in rural settlements-were found to have little knowledge and awareness of HACCP. These results indicate an urgent need to provide NSNP managers with food safety training and resources (potable water supplies, electricity, dedicated food preparation facilities), particularly in schools in rural settlements.

Low ERCP Volume Is Associated with More Industry Representative Interactions but Similar Training of Nurses.

PubMed

Keswani, Rajesh N; Malpas, Phyllis; Lynch, Sheryl E; Coté, Gregory A

2016-03-01

Data on ERCP nurses and associate (ERCP-NA) training and comfort are lacking. Healthcare industry representative (HCIR) influence may be greater in low-volume units (LVUs) due to decreased procedure and device familiarity. The aim of this study was to compare ERCP-NA training, safety, and HCIR relationships between LVU and high-volume unit (HVU) ERCP facilities. We conducted an electronic survey of all Society of Gastroenterology Nurses and Associates (SGNA) members assessing: (1) demographics and procedure volume, (2) ERCP training and radiation safety, and (3) HCIR interactions. Responses were stratified by ERCP volume. Among 832 SGNA member respondents (median age 55), 615 (74%) worked as an ERCP-NA; 41% derived from LVUs. The majority of ERCP-NAs, irrespective of unit volume, had observed <50 ERCPs before starting. Except for lead glasses, the majority (>80%) adhered to basic radiation safety, irrespective of unit volume. LVUs were more likely than HVU ERCP-NAs to agree that HCIRs were requested for intra-procedure assistance (24 vs. 19%, p = 0.008), asked for input on the next choice of device (22 vs. 15%, p = 0.01), and assist in device usage (27 vs. 22%, p = 0.04). Irrespective of volume, 30% agreed that they were more likely to utilize a company's devices if that HCIR was present. ERCP-NA training before independent participation in ERCP is suboptimal. HCIRs are frequently requested for assistance during ERCPs, especially in LVUs. HCIR impact on ERCP outcomes and device utilization and whether enhanced ERCP-NA training will impact the role of HCIR, require further study.

The Role of Smile Train and the Partner Hospital Model in Surgical Safety, Collaboration, and Quality in the Developing World.

PubMed

Purnell, Chad A; McGrath, Jennifer L; Gosain, Arun K

2015-06-01

The partner hospital model identifies hospitals in the developing world to educate and enable local surgeons to deliver effective cleft care. This study aimed to determine the outcomes of this model on safety, education, and quality of surgical care. Twelve partner hospitals, sponsored by Smile Train for 5 or more years and distributed over 4 continents, were selected. Activities at each institution were evaluated using cleft surgical data, and surveys were completed by hospital leadership. A mean of 82% of cleft patients at partner hospitals underwent sponsored surgeries. After partnership, all 12 hospitals implemented preoperative checklists for cleft surgery, and 5 implemented checklists for other surgeries. All hospitals had personnel who received safety training as a result of partnership. There was no change in 30-day reoperations or readmissions. Follow-up rate increased by 18% (P = 0.03). Facilities recruited 1.8 additional cleft surgeons (P < 0.01) and increased the number of cleft surgical trainees by a mean of 13.3 annually (P = 0.012); 2.5 ± 1.7 additional ancillary services were added, resulting in 75% of partner hospitals having a basic multidisciplinary cleft team (surgery, speech, and dental) compared with 25% prior to partnership (P < 0.01). Total cleft surgeries, alveolar bone grafts, and percentage of secondary surgeries increased significantly as length of partnership progressed (P < 0.01). Smile Train's partner hospital model increases both the volume and quality of cleft care delivered at these institutions. Safety initiatives for cleft care demonstrate effects extending to global surgical care delivered at partner hospitals.

Networking grassroots efforts to improve safety and health in informal economy workplaces in Asia.

PubMed

Kawakami, Tsuyoshi

2006-01-01

Many workers in Asia are in the informal economy. They often work in substandard conditions, exposed to hazards in the workplace. Learning from the recent successes of participatory training programmes to improve safety and health in Asia, the ILO has strengthened its partnership efforts with local people to improve safety and health of informal economy workplaces. The target groups were: (1) home workplaces in Cambodia and Thailand, (2) salt fields and fishing villages in Cambodia where many young workers are working, and (3) small construction sites in Cambodia, Laos, Mongolia, Thailand and Vietnam. The walk-through survey results showed that the workers and owners in the target informal economy workplaces had the strong will to improve safety and health at their own initiatives and needed practical support. In the participatory, action-oriented training workshops carried out, the participated workers and owners were able to identify their priority safety and health actions. Commonly identified were clear and safe transport ways, safer handling of hazardous substances, basic welfare needs such as drinking water and sanitary toilets, and work posture. The follow-up visits confirmed that many of the proposed actions were actually taken by using low-cost available materials. These positive changes were possible by applying the participatory training tools such as illustrated checklists and extensive use of photographs showing local good examples and placing emphasis on facilitator roles of trainers. In conclusion, the target informal economy workplaces in Asia made positive changes in safety and health through the participatory, action-oriented training focusing on local initiative and low-cost improvement measures. Local network support mechanisms to share lessons from good practices played essential roles in encouraging the voluntary implementation of practical improvement actions. It is important to increase our joint efforts to reach more informal economy workplaces in industrially developing countries and provide practical support measures focusing on local self-help initiatives.

Nuclear criticality safety staff training and qualifications at Los Alamos National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Monahan, S.P.; McLaughlin, T.P.

1997-05-01

Operations involving significant quantities of fissile material have been conducted at Los Alamos National Laboratory continuously since 1943. Until the advent of the Laboratory`s Nuclear Criticality Safety Committee (NCSC) in 1957, line management had sole responsibility for controlling criticality risks. From 1957 until 1961, the NCSC was the Laboratory body which promulgated policy guidance as well as some technical guidance for specific operations. In 1961 the Laboratory created the position of Nuclear Criticality Safety Office (in addition to the NCSC). In 1980, Laboratory management moved the Criticality Safety Officer (and one other LACEF staff member who, by that time, wasmore » also working nearly full-time on criticality safety issues) into the Health Division office. Later that same year the Criticality Safety Group, H-6 (at that time) was created within H-Division, and staffed by these two individuals. The training and education of these individuals in the art of criticality safety was almost entirely self-regulated, depending heavily on technical interactions between each other, as well as NCSC, LACEF, operations, other facility, and broader criticality safety community personnel. Although the Los Alamos criticality safety group has grown both in size and formality of operations since 1980, the basic philosophy that a criticality specialist must be developed through mentoring and self motivation remains the same. Formally, this philosophy has been captured in an internal policy, document ``Conduct of Business in the Nuclear Criticality Safety Group.`` There are no short cuts or substitutes in the development of a criticality safety specialist. A person must have a self-motivated personality, excellent communications skills, a thorough understanding of the principals of neutron physics, a safety-conscious and helpful attitude, a good perspective of real risk, as well as a detailed understanding of process operations and credible upsets.« less

Firearms training: what is actually taught?

PubMed

Hemenway, David; Rausher, Steven; Violano, Pina; Raybould, Toby A; Barber, Catherine W

2017-10-07

Firearm safety instructors and public health professionals are natural allies in the quest to prevent firearm injuries. We audited basic firearm classes to provide information that can help familiarise public health professionals and others with the content covered. With the advice of expert instructors, we created an audit form. Volunteers audited 20 basic firearm classes in seven north-eastern states. All trainers covered a wide variety of safety issues. Some specific basics were covered in 90+% of the classes, including how to safely load/unload a gun, keeping your finger off the trigger until ready to shoot, and being aware of your target and what is behind it. In 50%-75% of the classes, the trainer covered topics such as operating a safety, clearing jams and cartridge malfunctions, and recommended storing guns unloaded and locked when not in use. Few instructors covered firearm suicide prevention (10%) or domestic violence (10%). Most encouraged gun ownership, gun carrying, gun use in self-defence and membership in a gun rights group. From a public health standpoint, we would like to see more instructors covering topics such as firearm suicide and alternatives to gun use in self-defence, and to recommend safer storage of firearms. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Transferability of laparoscopic skills using the virtual reality simulator.

PubMed

Yang, Cui; Kalinitschenko, Uljana; Helmert, Jens R; Weitz, Juergen; Reissfelder, Christoph; Mees, Soeren Torge

2018-03-30

Skill transfer represents an important issue in surgical education, and is not well understood. The aim of this randomized study is to assess the transferability of surgical skills between two laparoscopic abdominal procedures using the virtual reality simulator in surgical novices. From September 2016 to July 2017, 44 surgical novices were randomized into two groups and underwent a proficiency-based basic training consisting of five selected simulated laparoscopic tasks. In group 1, participants performed an appendectomy training on the virtual reality simulator until they reached a defined proficiency. They moved on to the tutorial procedural tasks of laparoscopic cholecystectomy. Participants in group 2 started with the tutorial procedural tasks of laparoscopic cholecystectomy directly. Finishing the training, participants of both groups were required to perform a complete cholecystectomy on the simulator. Time, safety and economy parameters were analysed. Significant differences in the demographic characteristics and previous computer games experience between the two groups were not noted. Both groups took similar time to complete the proficiency-based basic training. Participants in group 1 needed significantly less movements (388.6 ± 98.6 vs. 446.4 ± 81.6; P < 0.05) as well as shorter path length (810.2 ± 159.5 vs. 945.5 ± 187.8 cm; P < 0.05) to complete the cholecystectomy compared to group 2. Time and safety parameters did not differ significantly between both groups. The data demonstrate a positive transfer of motor skills between laparoscopic appendectomy and cholecystectomy on the virtual reality simulator; however, the transfer of cognitive skills is limited. Separate training curricula seem to be necessary for each procedure for trainees to practise task-specific cognitive skills effectively. Mentoring could help trainees to get a deeper understanding of the procedures, thereby increasing the chance for the transfer of acquired skills.

[Safety in the Microbiology laboratory].

PubMed

Rojo-Molinero, Estrella; Alados, Juan Carlos; de la Pedrosa, Elia Gómez G; Leiva, José; Pérez, José L

2015-01-01

The normal activity in the laboratory of microbiology poses different risks - mainly biological - that can affect the health of their workers, visitors and the community. Routine health examinations (surveillance and prevention), individual awareness of self-protection, hazard identification and risk assessment of laboratory procedures, the adoption of appropriate containment measures, and the use of conscientious microbiological techniques allow laboratory to be a safe place, as records of laboratory-acquired infections and accidents show. Training and information are the cornerstones for designing a comprehensive safety plan for the laboratory. In this article, the basic concepts and the theoretical background on laboratory safety are reviewed, including the main legal regulations. Moreover, practical guidelines are presented for each laboratory to design its own safety plan according its own particular characteristics. Copyright © 2014 Elsevier España, S.L.U. y Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

Application of Function-Failure Similarity Method to Rotorcraft Component Design

NASA Technical Reports Server (NTRS)

Roberts, Rory A.; Stone, Robert E.; Tumer, Irem Y.; Clancy, Daniel (Technical Monitor)

2002-01-01

Performance and safety are the top concerns of high-risk aerospace applications at NASA. Eliminating or reducing performance and safety problems can be achieved with a thorough understanding of potential failure modes in the designs that lead to these problems. The majority of techniques use prior knowledge and experience as well as Failure Modes and Effects as methods to determine potential failure modes of aircraft. During the design of aircraft, a general technique is needed to ensure that every potential failure mode is considered, while avoiding spending time on improbable failure modes. In this work, this is accomplished by mapping failure modes to specific components, which are described by their functionality. The failure modes are then linked to the basic functions that are carried within the components of the aircraft. Using this technique, designers can examine the basic functions, and select appropriate analyses to eliminate or design out the potential failure modes. The fundamentals of this method were previously introduced for a simple rotating machine test rig with basic functions that are common to a rotorcraft. In this paper, this technique is applied to the engine and power train of a rotorcraft, using failures and functions obtained from accident reports and engineering drawings.

Simulation of Mission Phases

NASA Technical Reports Server (NTRS)

Carlstrom, Nicholas Mercury

2016-01-01

This position with the Simulation and Graphics Branch (ER7) at Johnson Space Center (JSC) provided an introduction to vehicle hardware, mission planning, and simulation design. ER7 supports engineering analysis and flight crew training by providing high-fidelity, real-time graphical simulations in the Systems Engineering Simulator (SES) lab. The primary project assigned by NASA mentor and SES lab manager, Meghan Daley, was to develop a graphical simulation of the rendezvous, proximity operations, and docking (RPOD) phases of flight. The simulation is to include a generic crew/cargo transportation vehicle and a target object in low-Earth orbit (LEO). Various capsule, winged, and lifting body vehicles as well as historical RPOD methods were evaluated during the project analysis phase. JSC core mission to support the International Space Station (ISS), Commercial Crew Program (CCP), and Human Space Flight (HSF) influenced the project specifications. The simulation is characterized as a 30 meter +V Bar and/or -R Bar approach to the target object's docking station. The ISS was selected as the target object and the international Low Impact Docking System (iLIDS) was selected as the docking mechanism. The location of the target object's docking station corresponds with the RPOD methods identified. The simulation design focuses on Guidance, Navigation, and Control (GNC) system architecture models with station keeping and telemetry data processing capabilities. The optical and inertial sensors, reaction control system thrusters, and the docking mechanism selected were based on CCP vehicle manufacturer's current and proposed technologies. A significant amount of independent study and tutorial completion was required for this project. Multiple primary source materials were accessed using the NASA Technical Report Server (NTRS) and reference textbooks were borrowed from the JSC Main Library and International Space Station Library. The Trick Simulation Environment and User Training Materials version 2013.0 release was used to complete the Trick tutorial. Multiple network privilege and repository permission requests were required in order to access previous simulation models. The project was also an introduction to computer programming and the Linux operating system. Basic C++ and Python syntax was used during the completion of the Trick tutorial. Trick's engineering analysis and Monte Carlo simulation capabilities were observed and basic space mission planning procedures were applied in the conceptual design phase. Multiple professional development opportunities were completed in addition to project duties during this internship through the System for Administration, Training, and Education Resources for NASA (SATERN). Topics include: JSC Risk Management Workshop, CCP Risk Management, Basic Radiation Safety Training, X-Ray Radiation Safety, Basic Laser Safety, JSC Export Control, ISS RISE Ambassador, Basic SharePoint 2013, Space Nutrition and Biochemistry, and JSC Personal Protective Equipment. Additionally, this internship afforded the opportunity for formal project presentation and public speaking practice. This was my first experience at a NASA center. After completing this internship I have a much clearer understanding of certain aspects of the agency's processes and procedures, as well as a deeper appreciation from spaceflight simulation design and testing. I will continue to improve my technical skills so that I may have another opportunity to return to NASA and Johnson Space Center.

Study on development of active-passive rehabilitation system for upper limbs: Hybrid-PLEMO

NASA Astrophysics Data System (ADS)

Kikuchi, T.; Jin, Y.; Fukushima, K.; Akai, H.; Furusho, J.

2009-02-01

In recent years, many researchers have studied the potential of using robotics technology to assist and quantify the motor functions for neuron-rehabilitation. Some kinds of haptic devices have been developed and evaluated its efficiency with clinical tests, for example, upper limb training for patients with spasticity after stroke. Active-type (motor-driven) haptic devices can realize a lot of varieties of haptics. But they basically require high-cost safety system. On the other hand, passive-type (brake-based) haptic devices have inherent safety. However, the passive robot system has strong limitation on varieties of haptics. There are not sufficient evidences to clarify how the passive/active haptics effect to the rehabilitation of motor skills. In this paper, we developed an active-passive-switchable rehabilitation system with ER clutch/brake device named "Hybrid-PLEMO" in order to address these problems. In this paper, basic structures and haptic control methods of the Hybrid-PLEMO are described.

Development and training of a learning expert system in an autonomous mobile robot via simulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spelt, P.F.; Lyness, E.; DeSaussure, G.

1989-11-01

The Center for Engineering Systems Advanced Research (CESAR) conducts basic research in the area of intelligent machines. Recently at CESAR a learning expert system was created to operate on board an autonomous robot working at a process control panel. The authors discuss two-computer simulation system used to create, evaluate and train this learning system. The simulation system has a graphics display of the current status of the process being simulated, and the same program which does the simulating also drives the actual control panel. Simulation results were validated on the actual robot. The speed and safety values of using amore » computerized simulator to train a learning computer, and future uses of the simulation system, are discussed.« less

Private Sector Providers of Basic Skills Training in the Workplace. A Study of the General Training and Basic Skills Responses of Randomly Selected Companies Which Provide Basic Skills Training to Their Employees.

ERIC Educational Resources Information Center

Mark, Jorie Lester

A questionnaire was distributed to 1,305 companies to study the basic skills training provided. Of 62 responses, 41 companies had basic skills training programs. Respondents represented these types of companies: communications and utilities, finance and insurance, manufacturing, wholesalers, retailers, health and hospitals, and mining, and had…

Food hygiene training in the UK: time for a radical re-think?

PubMed

MacAuslan, E

2001-12-01

Training food handlers in the hospitality industry has been recommended by various organisations as a means of improving food handling practices and thus the safety of food for consumers. It is nearly 20 years since the first examinations for basic level food hygiene certificates were made available to food handlers in the UK. Since then little has changed in the syllabuses and in the way the questions are worded. However, the range of languages spoken by food handlers working in the UK has increased substantially since more employers are recruiting those who speak English as a second language. Training can be an unwelcome expense for managers where there is a high turnover of employees, especially amongst those for whom English is not a first language. To improve practical implementation of food hygiene theory it is time to develop a radical strategy concerning the way training is targeted and delivered in the UK, and perhaps Europe.

[Simulation in surgical training].

PubMed

Nabavi, A; Schipper, J

2017-01-01

Patient safety during operations hinges on the surgeon's skills and abilities. However, surgical training has come under a variety of restrictions. To acquire dexterity with decreasingly "simple" cases, within the legislative time constraints and increasing expectations for surgical results is the future challenge. Are there alternatives to traditional master-apprentice learning? A literature review and analysis of the development, implementation, and evaluation of surgical simulation are presented. Simulation, using a variety of methods, most important physical and virtual (computer-generated) models, provides a safe environment to practice basic and advanced skills without endangering patients. These environments have specific strengths and weaknesses. Simulations can only serve to decrease the slope of learning curves, but cannot be a substitute for the real situation. Thus, they have to be an integral part of a comprehensive training curriculum. Our surgical societies have to take up that challenge to ensure the training of future generations.

Electrical Safety Program: Nonelectrical Crafts at LANL, Live #12175

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glass, George

Los Alamos National Laboratory (LANL) and the federal government require those working with or near electrical equipment to be trained on electrical hazards and how to avoid them. Although you might not be trained to work on electrical systems, your understanding of electricity, how it can hurt you, and what precautions to take when working near electricity could save you or others from injury or death. This course, Electrical Safety Program: Nonelectrical Crafts at LANL (12175), provides knowledge of basic electrical concepts, such as current, voltage, and resistance, and their relationship to each other. You will learn how to applymore » these concepts to safe work practices while learning about the dangers of electricity—and associated hazards—that you may encounter on the job. The course also discusses what you can do to prevent electrical accidents and what you should do in the event of an electrical emergency. The LANL Electrical Safety Program is defined by LANL Procedure (P) 101-13. An electrical safety officer (ESO) is well versed in this document and should be consulted regarding electrical questions. Appointed by the responsible line manager (RLM), ESOs can tell you if a piece of equipment or an operation is safe or how to make it safe.« less

Awareness and practice of safety precautions among healthcare workers in the laboratories of two public health facilities in Nigeria.

PubMed

Fadeyi, A; Fowotade, A; Abiodun, M O; Jimoh, A K; Nwabuisi, C; Desalu, O O

2011-06-01

To determine the level of awareness and practice of SP among laboratory workers at two tertiary public health facilities in Nigeria. A semi-structured, self-administered questionnaire was used to assess the awareness, attitude and adherence to SP among laboratory workers. Information on the availability of safety equipment was also sought. The laboratory safety practice of respondents was assessed based on self-reported observance of basic principles of universal precautions in clinical settings. Study participants were 130, mean age: 28.2 years (SD±6.6), number of years in hospital employment: 3.7 years (SD±2.4) and the male to female ratio was 1.8:1. Many (41.5%) were unaware and 25.4% do not observe SP. Participants attest to availability of various safety devices and equipment including hand gloves (86.2%), disinfectants (84.6%), HBV immunisation (46.2%) and post exposure prophylaxis (PEP) for HIV and HBV (79.6%). Attitude to safety is unsatisfactory as 60.0% eat and drink in the laboratory, 50.8% recap needles and 56.9% use sharps box. Even though 83.1% are willing to take PEP, only 1.5% will present self following laboratory injury. This study shows the deficit in the awareness of SP among laboratory personnel and demonstrates that attitude and practice of safety rules are unsatisfactory. Training and re-training on SP is therefore desired. Counselling to induce a positive attitudinal change on HBV immunisation and PEP is similarly necessary.

Knowledge and Attitudes on Food Hygiene among Food Services Staff on Board Ships.

PubMed

Grappasonni, I; Petrelli, F; Scuri, S; Mahdi, S S; Sibilio, F; Amenta, F

2018-01-01

Ships have long been sites for outbreaks of infectious diseases, particularly gastrointestinal diseases. The ship environment has the potential to facilitate the spread of such diseases, infecting susceptible cohorts of embarked passengers and crew. Gastrointestinal disorders among seafarers are fairly common and usually represent the first or second cause of requests for medical assistance aboard ships in international waters. The purpose of this study was to evaluate food safety and the level of knowledge among food service personnel on board merchant ships, where food handlers could be a cause of health problems for all crew members. An anonymous self-administered questionnaire containing specific questions about food hygiene and safety knowledge was administered. The overall score of correct answers for the food safety aspects tested was 51.77 (SD 3.87) out of 76 points, corresponding to 68.12% of questions answered correctly. Food workers who followed a training course showed higher mean knowledge score (p < 0.05) compared to not-trained workers. The most relevant significant differences (p < 0.05) were noticeable in the personal hygiene, cross-contamination, safe storage, and knowledge of foodborne pathogens sections. Food services staff on board cargo ships should be adequately trained and should understand basic and fundamental aspects of food hygiene, related pathologies and sanitation, as they are responsible for the health and wellbeing of many seafarers.

41 CFR 102-80.10 - What are the basic safety and environmental management policies for real property?

Code of Federal Regulations, 2010 CFR

2010-07-01

... safety and environmental management policies for real property? 102-80.10 Section 102-80.10 Public... MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT General Provisions § 102-80.10 What are the basic safety and environmental management policies for real property? The basic safety and...

First Responders and Prehospital Care for Road Traffic Injuries in Malawi.

PubMed

Chokotho, Linda; Mulwafu, Wakisa; Singini, Isaac; Njalale, Yasin; Maliwichi-Senganimalunje, Limbika; Jacobsen, Kathryn H

2017-02-01

Introduction Road traffic collisions are a common cause of injuries and injury-related deaths in sub-Saharan Africa (SSA). Basic prehospital care can be the difference between life and death for injured drivers, passengers, and pedestrians. Problem This study examined the challenges associated with current first response practices in Malawi. In April 2014, focus groups were conducted in two areas of Malawi: Karonga (in the Northern Region) and Blantyre (in the Southern Region; both are along the M1 highway), and a qualitative synthesis approach was used to identify themes. All governmental and nongovernmental first response organizations identified by key informants were contacted, and a checklist was used to identify the services they offer. Access to professional prehospital care in Malawi is almost nonexistent, aside from a few city fire departments and private ambulance services. Rapid transportation to a hospital is usually the primary goal of roadside care because of limited first aid knowledge and a lack of access to basic safety equipment. The key informants recommended: expanding community-based first aid training; emphasizing umunthu (shared humanity) to inspire bystander involvement in roadside care; empowering local leaders to coordinate on-site responses; improving emergency communication systems; equipping traffic police with road safety gear; and expanding access to ambulance services. Prehospital care in Malawi would be improved by the creation of a formal network of community leaders, police, commercial drivers, and other lay volunteers who are trained in basic first aid and are equipped to respond to crash sites to provide roadside care to trauma patients and prepare them for safe transport to hospitals. Chokotho L , Mulwafu W , Singini I , Njalale Y , Maliwichi-Senganimalunje L , Jacobsen KH . First responders and prehospital care for road traffic injuries in Malawi. Prehosp Disaster Med. 2017;32(1):14-19.

National plan to enhance aviation safety through human factors improvements

NASA Technical Reports Server (NTRS)

Foushee, Clay

1990-01-01

The purpose of this section of the plan is to establish a development and implementation strategy plan for improving safety and efficiency in the Air Traffic Control (ATC) system. These improvements will be achieved through the proper applications of human factors considerations to the present and future systems. The program will have four basic goals: (1) prepare for the future system through proper hiring and training; (2) develop a controller work station team concept (managing human errors); (3) understand and address the human factors implications of negative system results; and (4) define the proper division of responsibilities and interactions between the human and the machine in ATC systems. This plan addresses six program elements which together address the overall purpose. The six program elements are: (1) determine principles of human-centered automation that will enhance aviation safety and the efficiency of the air traffic controller; (2) provide new and/or enhanced methods and techniques to measure, assess, and improve human performance in the ATC environment; (3) determine system needs and methods for information transfer between and within controller teams and between controller teams and the cockpit; (4) determine how new controller work station technology can optimally be applied and integrated to enhance safety and efficiency; (5) assess training needs and develop improved techniques and strategies for selection, training, and evaluation of controllers; and (6) develop standards, methods, and procedures for the certification and validation of human engineering in the design, testing, and implementation of any hardware or software system element which affects information flow to or from the human.

Midwifery students' experiences of simulation- and skills training.

PubMed

Lendahls, Lena; Oscarsson, Marie G

2017-03-01

In Sweden, simulation- and skills training are implemented in midwifery education in order to prepare students for clinical practice. Research regarding the use of both low to high levels of fidelity in simulation in midwifery programme is limited. The aim of this study was to explore midwifery students' experiences of simulation- and skills training. Midwifery students (n=61), at advanced level, were interviewed in 13 group interviews from 2011 to 2105. A semi-structured interview guide was used, and data were analysed by content analysis. The results are presented in four main categories: develops hands on skills and communication, power of collaborative learning, highly valued learning environment and facilitates clinical practice. The majority of students felt that the simulation- and skills training were necessary to become familiar with hands on skills. Having repetitive practices in a safe and secure environment was viewed as important, and students highly valued that mistakes could be made without fear of comprising patient safety. Student's collaboration, reflections and critical thinking increased learning ability. Simulation- and skills training created links between theory and practice, and the lecturer had an important role in providing instructions and feedback. Students felt prepared and confident before their clinical practice, and simulation- and skills training increased safety for all involved, resulting in students being more confident, as patients in clinical practice became less exposed. Furthermore, mentors were satisfied with students' basic skills. Simulation- and skills training support the development of midwifery skills. It creates links between theory and practice, which facilitates students' learning ability. Training needs to include reflections and critical thinking in order to develop their learning. The lecturer has an important role in encouraging time for reflections and creating safe environment during the skills and simulation training. Copyright © 2016 Elsevier Ltd. All rights reserved.

Education in Basic Skills and Training for Productive Work

NASA Astrophysics Data System (ADS)

Labarca, Guillermo

1998-09-01

The success of global policies and strategies aimed at training for productive work depends to a large extent on the level of development of basic skills among the work force and, likewise, training costs will vary according to the level of general preparation of those entering on the process. In view of the close relationship between the structure of the school system, the development of basic skills and actual training, different options are available to resolve imbalances between training for productive employment and previous basic education. Our conclusions are that training cannot replace basic education, that the process of technological change goes hand in hand with an increased demand for workers with a high level of education, that substituting training in specific skills for good basic education is not the most efficient option, and that one of the favorable effects of primary education is that it facilitates after- school training. This article seeks to identify certain dimensions of human resource training which are often overlooked in relation to both basic skills and specific training proper: namely, the imbalances existing between vocational training and previous education, and the options available for correcting them.

Teen worker safety training: methods used, lessons taught, and time spent.

PubMed

Zierold, Kristina M

2015-05-01

Safety training is strongly endorsed as one way to prevent teens from performing dangerous tasks at work. The objective of this mixed methods study was to characterize the safety training that teenagers receive on the job. From 2010 through 2012, focus groups and a cross-sectional survey were conducted with working teens. The top methods of safety training reported were safety videos (42 percent) and safety lectures (25 percent). The top lessons reported by teens were "how to do my job" and "ways to spot hazards." Males, who were more likely to do dangerous tasks, received less safety training than females. Although most teens are getting safety training, it is inadequate. Lessons addressing safety behaviors are missing, training methods used are minimal, and the time spent is insignificant. More research is needed to understand what training methods and lessons should be used, and the appropriate safety training length for effectively preventing injury in working teens. In addition, more research evaluating the impact of high-quality safety training compared to poor safety training is needed to determine the best training programs for teens. © The Author(s) 2015 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Improving health, safety and energy efficiency in New Zealand through measuring and applying basic housing standards.

PubMed

Gillespie-Bennett, Julie; Keall, Michael; Howden-Chapman, Philippa; Baker, Michael G

2013-08-02

Substandard housing is a problem in New Zealand. Historically there has been little recognition of the important aspects of housing quality that affect people's health and safety. In this viewpoint article we outline the importance of assessing these factors as an essential step to improving the health and safety of New Zealanders and household energy efficiency. A practical risk assessment tool adapted to New Zealand conditions, the Healthy Housing Index (HHI), measures the physical characteristics of houses that affect the health and safety of the occupants. This instrument is also the only tool that has been validated against health and safety outcomes and reported in the international peer-reviewed literature. The HHI provides a framework on which a housing warrant of fitness (WOF) can be based. The HHI inspection takes about one hour to conduct and is performed by a trained building inspector. To maximise the effectiveness of this housing quality assessment we envisage the output having two parts. The first would be a pass/fail WOF assessment showing whether or not the house meets basic health, safety and energy efficiency standards. The second component would rate each main assessment area (health, safety and energy efficiency), potentially on a five-point scale. This WOF system would establish a good minimum standard for rental accommodation as well encouraging improved housing performance over time. In this article we argue that the HHI is an important, validated, housing assessment tool that will improve housing quality, leading to better health of the occupants, reduced home injuries, and greater energy efficiency. If required, this tool could be extended to also cover resilience to natural hazards, broader aspects of sustainability, and the suitability of the dwelling for occupants with particular needs.

75 FR 6070 - Notice of Public Meeting on the International Atomic Energy Agency Basic Safety Standards Version...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-05

... Energy Agency Basic Safety Standards Version 3.0, Draft Safety Requirements DS379 AGENCY: Nuclear Regulatory Commission. ACTION: Notice of Public Meeting on the International Atomic Energy Agency Basic... development of U.S. Government comments on this International Atomic Energy Agency (IAEA) draft General Safety...

Evaluation of the food safety training for food handlers in restaurant operations

PubMed Central

Park, Sung-Hee; Kwak, Tong-Kyung

2010-01-01

This study examined the extent of improvement of food safety knowledge and practices of employee through food safety training. Employee knowledge and practice for food safety were evaluated before and after the food safety training program. The training program and questionnaires for evaluating employee knowledge and practices concerning food safety, and a checklist for determining food safety performance of restaurants were developed. Data were analyzed using the SPSS program. Twelve restaurants participated in this study. We split them into two groups: the intervention group with training, and the control group without food safety training. Employee knowledge of the intervention group also showed a significant improvement in their score, increasing from 49.3 before the training to 66.6 after training. But in terms of employee practices and the sanitation performance, there were no significant increases after the training. From these results, we recommended that the more job-specific and hand-on training materials for restaurant employees should be developed and more continuous implementation of the food safety training and integration of employee appraisal program with the outcome of safety training were needed. PMID:20198210

Practical ways to facilitate ergonomics improvements in occupational health practice.

PubMed

Kogi, Kazutaka

2012-12-01

Recent advances in participatory programs for improving workplace conditions are discussed to examine practical ways to facilitate ergonomics improvements. Participatory training programs are gaining importance, particularly in promoting occupational health and safety in small-scale workplaces. These programs have led to many improvements that can reduce work-related risks in varied situations. Recent experiences in participatory action-oriented training programs in small workplaces and agriculture are reviewed.The emphasis of the review is on training steps, types of improvements achieved, and the use of action tools by trainers and training participants. Immediate improvements in multiple technical areas are targeted, including materials handling,workstation design, physical environment, welfare facilities, and work organization. In facilitating ergonomics improvements in each local situation, it is important to focus on (a) building on local good practices; (b) applying practical, simple improvements that apply the basic principles of ergonomics; and (c) developing action-oriented toolkits for direct use by workers and managers. This facilitation process is effective when locally designed action toolkits are used by trainers, including local good examples, action checklists, and illustrated how-to guides. Intervention studies demonstrate the effectiveness of participatory steps that use these toolkits in promoting good practices and reducing work-related risks. In facilitating ergonomics improvements in small-scale workplaces, it is important to focus on practical, low-cost improvements that build on local good practices. The use of action-oriented toolkits reflecting basic ergonomics principles is helpful.The promotion of the intercountry networking of positive experiences in participatory training is suggested.

The Definition of Basic Skills in Manufacturing Industries.

ERIC Educational Resources Information Center

Jones, Charles M.

1996-01-01

Survey responses from 186 of 250 trainers/human resource managers and a Delphi panel of 21 rated companies' basic skills training provisions and the importance of basic skills. Although most stated their companies provide basic skills training, results show most are reluctant to hire, train, or retain workers with low basic skills. (SK)

Safety training for working youth: Methods used versus methods wanted.

PubMed

Zierold, Kristina M

2016-04-07

Safety training is promoted as a tool to prevent workplace injury; however, little is known about the safety training experiences young workers get on-the-job. Furthermore, nothing is known about what methods they think would be the most helpful for learning about safe work practices. To compare safety training methods teens get on the job to those safety training methods teens think would be the best for learning workplace safety, focusing on age differences. A cross-sectional survey was administered to students in two large high schools in spring 2011. Seventy percent of working youth received safety training. The top training methods that youth reported getting at work were safety videos (42%), safety lectures (25%), and safety posters/signs (22%). In comparison to the safety training methods used, the top methods youth wanted included videos (54%), hands-on (47%), and on-the-job demonstrations (34%). This study demonstrated that there were differences in training methods that youth wanted by age; with older youth seemingly wanting more independent methods of training and younger teens wanting more involvement. Results indicate that youth want methods of safety training that are different from what they are getting on the job. The differences in methods wanted by age may aid in developing training programs appropriate for the developmental level of working youth.

Deriving Function-failure Similarity Information for Failure-free Rotorcraft Component Design

NASA Technical Reports Server (NTRS)

Roberts, Rory A.; Stone, Robert B.; Tumer, Irem Y.; Clancy, Daniel (Technical Monitor)

2002-01-01

Performance and safety are the top concerns of high-risk aerospace applications at NASA. Eliminating or reducing performance and safety problems can be achieved with a thorough understanding of potential failure modes in the design that lead to these problems. The majority of techniques use prior knowledge and experience as well as Failure Modes and Effects as methods to determine potential failure modes of aircraft. The aircraft design needs to be passed through a general technique to ensure that every potential failure mode is considered, while avoiding spending time on improbable failure modes. In this work, this is accomplished by mapping failure modes to certain components, which are described by their functionality. In turn, the failure modes are then linked to the basic functions that are carried within the components of the aircraft. Using the technique proposed in this paper, designers can examine the basic functions, and select appropriate analyses to eliminate or design out the potential failure modes. This method was previously applied to a simple rotating machine test rig with basic functions that are common to a rotorcraft. In this paper, this technique is applied to the engine and power train of a rotorcraft, using failures and functions obtained from accident reports and engineering drawings.

10 CFR 835.901 - Radiation safety training.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Radiation safety training. 835.901 Section 835.901 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Radiation Safety Training § 835.901 Radiation safety training. (a) Each individual shall complete radiation safety training on the topics established at § 835...

Developing a complex systems perspective for medical education to facilitate the integration of basic science and clinical medicine.

PubMed

Aron, David C

2017-04-01

The purpose of medical education is to produce competent and capable professional practitioners who can combine the art and science of medicine. Moreover, this process must prepare individuals to practise in a field in which knowledge is increasing and the contexts in which that knowledge is applied are changing in unpredictable ways. The 'basic sciences' are important in the training of a physician. The goal of basic science training is to learn it in a way that the material can be applied in practice. Much effort has been expended to integrate basic science and clinical training, while adding many other topics to the medical curriculum. This effort has been challenging. The aims of the paper are (1) to propose a unifying conceptual framework that facilitates knowledge integration among all levels of living systems from cell to society and (2) illustrate the organizing principles with two examples of the framework in action - cybernetic systems (with feedback) and distributed robustness. Literature related to hierarchical and holarchical frameworks was reviewed. An organizing framework derived from living systems theory and spanning the range from molecular biology to health systems management was developed. The application of cybernetic systems to three levels (regulation of pancreatic beta cell production of insulin, physician adjustment of medication for glycaemic control and development and action of performance measures for diabetes care) was illustrated. Similarly distributed robustness was illustrated by the DNA damage response system and principles underlying patient safety. Each of the illustrated organizing principles offers a means to facilitate the weaving of basic science and clinical medicine throughout the course of study. The use of such an approach may promote systems thinking, which is a core competency for effective and capable medical practice. Published 2016. This article is a U.S. Government work and is in the public domain in the USA.

78 FR 979 - Petition for Positive Train Control Safety Plan Approval and System Certification of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-07

...] Petition for Positive Train Control Safety Plan Approval and System Certification of the Electronic Train... the Federal Railroad Administration (FRA) for Positive Train Control (PTC) Safety Plan (PTCSP...-based train control system safety overlay designed to protect against the consequences of train-to-train...

A simulation study of control and display requirements for zero-experience general aviation pilots

NASA Technical Reports Server (NTRS)

Stewart, Eric C.

1993-01-01

The purpose of this simulation study was to define the basic human factor requirements for operating an airplane in all weather conditions. The basic human factors requirements are defined as those for an operator who is a complete novice for airplane operations but who is assumed to have automobile driving experience. These operators thus have had no piloting experience or training of any kind. The human factor requirements are developed for a practical task which includes all of the basic maneuvers required to go from one airport to another airport in limited visibility conditions. The task was quite demanding including following a precise path with climbing and descending turns while simultaneously changing airspeed. The ultimate goal of this research is to increase the utility of general aviation airplanes - that is, to make them a practical mode of transportation for a much larger segment of the general population. This can be accomplished by reducing the training and proficiency requirements of pilots while improving the level of safety. It is believed that advanced technologies such as fly-by-wire (or light), and head-up pictorial displays can be of much greater benefit to the general aviation pilot than to the full-time, professional pilot.

Mothers’ perspectives on the delivery of childhood injury messages: a qualitative study from the growing up in Wales, environments for healthy living study (EHL)

PubMed Central

2013-01-01

Background Childhood injury is the second leading cause of death for infants aged 1–5 years in the United Kingdom (UK) and most unintentional injuries occur in the home. We explored mothers’ knowledge and awareness of child injury prevention and sought to discover mothers’ views about the best method of designing interventions to deliver appropriate child safety messages to prevent injury in the home. Methods Qualitative study based on 21 semi-structured interviews with prospective mothers and mothers of young children. Mothers were selected according to neighbourhood deprivation status. Results There was no difference in awareness of safety devices according to mothers’ deprivation status. Social networks were important in raising awareness and adherence to child safety advice. Mothers who were recent migrants had not always encountered safety messages or safety equipment commonly used in the UK. Mothers’ recommended that safety information should be basic and concise, and include both written and pictorial information and case studies focus on proactive preventive messages. Messages should be delivered both by mass media and suitably trained individuals and be timed to coincide with pregnancy and repeated at age appropriate stages of child development. Conclusions The findings suggest that timely childhood injury-related risk messages should be delivered during pregnancy and in line with developmental milestones of the child, through a range of sources including social networks, mass media, face-to-face advice from health professionals and other suitably trained mothers. In addition information on the safe use of home appliances around children and use of child safety equipment should be targeted specifically at those who have recently migrated to the United Kingdom. PMID:24007442

Development of a Training Model for Laparoscopic Common Bile Duct Exploration

PubMed Central

Rodríguez, Omaira; Benítez, Gustavo; Sánchez, Renata; De la Fuente, Liliana

2010-01-01

Background: Training and experience of the surgical team are fundamental for the safety and success of complex surgical procedures, such as laparoscopic common bile duct exploration. Methods: We describe an inert, simple, very low-cost, and readily available training model. Created using a “black box” and basic medical and surgical material, it allows training in the fundamental steps necessary for laparoscopic biliary tract surgery, namely, (1) intraoperative cholangiography, (2) transcystic exploration, and (3) laparoscopic choledochotomy, and t-tube insertion. Results: The proposed model has allowed for the development of the skills necessary for partaking in said procedures, contributing to its development and diminishing surgery time as the trainee advances down the learning curve. Further studies are directed towards objectively determining the impact of the model on skill acquisition. Conclusion: The described model is simple and readily available allowing for accurate reproduction of the main steps and maneuvers that take place during laparoscopic common bile duct exploration, with the purpose of reducing failure and complications. PMID:20529526

Surgical Safety Training of World Health Organization Initiatives.

PubMed

Davis, Christopher R; Bates, Anthony S; Toll, Edward C; Cole, Matthew; Smith, Frank C T; Stark, Michael

2014-01-01

Undergraduate training in surgical safety is essential to maximize patient safety. This national review quantified undergraduate surgical safety training. Training of 2 international safety initiatives was quantified: (1) World Health Organization (WHO) "Guidelines for Safe Surgery" and (2) Department of Health (DoH) "Principles of the Productive Operating Theatre." Also, 13 additional safety skills were quantified. Data were analyzed using Mann-Whitney U tests. In all, 23 universities entered the study (71.9% response). Safety skills from WHO and DoH documents were formally taught in 4 UK medical schools (17.4%). Individual components of the documents were taught more frequently (47.6%). Half (50.9%) of the additional safety skills identified were taught. Surgical societies supplemented safety training, although the total amount of training provided was less than that in university curricula (P < .0001). Surgical safety training is inadequate in UK medical schools. To protect patients and maximize safety, a national undergraduate safety curriculum is recommended. © 2013 by the American College of Medical Quality.

The role and working conditions of Movement Science students employed in sport and recreational facilities: An Italian multicenter study.

PubMed

Gallè, Francesca; Di Onofrio, Valeria; Arpesella, Marisa; Bacci, Silvia; Bianco, Antonino; Brandi, Giorgio; Bruno, Stefania; Anastasi, Daniela; Carraro, Elisabetta; Flacco, Maria Elena; Giampaoli, Saverio; Izzotti, Alberto; Leoni, Erica; Bertoncello, Chiara; Minelli, Liliana; Napoli, Christian; Nobile, Carmelo; Pasquarella, Cesira; Liguori, Giorgio; Romano Spica, Vincenzo

2015-01-01

In Italy, students from Movement Science (MS) Degree Courses often work in sport and recreational facilities before graduation. The employment conditions of Movement Science students working in sport/recreational facilities were investigated, and the management and structural features of the facilities were evaluated, including safety policies. Regional differences were also considered. Questionnaires were administered to undergraduate and graduate students (N = 4,217) in 17 Universities. Students' perceptions of the quality of the facilities where they had been employed was evaluated using multivariate analysis. A latent class model with covariates was used to evaluate how variables relating to participants, employment facilities or regions influence their opinions. A high proportion of MS students were employed in sporting facilities (undergraduate level: 33% ; graduate level: 55%), in most cases without any formal employment contracts. Both the structural and hygienic features, as well as the professional knowledge of the staff, were considered good to excellent by the majority of participants (about 70%). Communication of the basic behavioral rules was considered adequate by 61-63% of undergraduate students and 71-75% of graduate students, while nearly half of the participants were dissatisfied with the staff safety training. Correlations between the perceived good structural/hygienic conditions, the presence of regulations and training programs for the staff were investigated. Differences regarding occupational level and safety training among different regions of Italy were also observed. Italian students in Movement Science were easily employed in sport/recreational facilities, but frequently without a formal contract. This is a consequence of the lack of specific regulations in the field of recreational/leisure employment and could have negative implications, especially in terms of safety.

Study of basic-life-support training for college students.

PubMed

Srivilaithon, Winchana; Amnaumpatanapon, Kumpon; Limjindaporn, Chitlada; Imsuwan, Intanon; Daorattanachai, Kiattichai

2015-03-01

To study about attitude and knowledge regarding basic-life-support among college students outside medical system. The cross-sectional study in the emergency department of Thammasat Hospital. The authors included college students at least aged 18 years old and volunteers to be study subjects. The authors collected data about attitudes and knowledge in performing basic-life-support by using set of questionnaires. 250 college students participated in the two hours trainingprogram. Most ofparticipants (42.4%) were second-year college students, of which 50 of 250 participants (20%) had trained in basic-life-support program. Twenty-seven of 250 participants (10.8%) had experience in basic-life-support outside the hospital. Most of participants had good attitude for doing basic-life-support. Participants had a significant improved score following training (mean score 8.66 and 12.34, respectively, p<0.001). Thirty-three of 250 participants (13.2%) passed the minimum score before trained testing, whereas 170 of 250 participants (68%) passed the minimum score after trained testing. With accurate knowledge and experience, lay rescuers may have more confidence tope7form basic-life-support to cardiac arrest patient. The training program in basic-life-support has significant impact on knowledge after training.

Access to a simulator is not enough: the benefits of virtual reality training based on peer-group-derived benchmarks--a randomized controlled trial.

PubMed

von Websky, Martin W; Raptis, Dimitri A; Vitz, Martina; Rosenthal, Rachel; Clavien, P A; Hahnloser, Dieter

2013-11-01

Virtual reality (VR) simulators are widely used to familiarize surgical novices with laparoscopy, but VR training methods differ in efficacy. In the present trial, self-controlled basic VR training (SC-training) was tested against training based on peer-group-derived benchmarks (PGD-training). First, novice laparoscopic residents were randomized into a SC group (n = 34), and a group using PGD-benchmarks (n = 34) for basic laparoscopic training. After completing basic training, both groups performed 60 VR laparoscopic cholecystectomies for performance analysis. Primary endpoints were simulator metrics; secondary endpoints were program adherence, trainee motivation, and training efficacy. Altogether, 66 residents completed basic training, and 3,837 of 3,960 (96.8 %) cholecystectomies were available for analysis. Course adherence was good, with only two dropouts, both in the SC-group. The PGD-group spent more time and repetitions in basic training until the benchmarks were reached and subsequently showed better performance in the readout cholecystectomies: Median time (gallbladder extraction) showed significant differences of 520 s (IQR 354-738 s) in SC-training versus 390 s (IQR 278-536 s) in the PGD-group (p < 0.001) and 215 s (IQR 175-276 s) in experts, respectively. Path length of the right instrument also showed significant differences, again with the PGD-training group being more efficient. Basic VR laparoscopic training based on PGD benchmarks with external assessment is superior to SC training, resulting in higher trainee motivation and better performance in simulated laparoscopic cholecystectomies. We recommend such a basic course based on PGD benchmarks before advancing to more elaborate VR training.

The dread factor: how hazards and safety training influence learning and performance.

PubMed

Burke, Michael J; Salvador, Rommel O; Smith-Crowe, Kristin; Chan-Serafin, Suzanne; Smith, Alexis; Sonesh, Shirley

2011-01-01

On the basis of hypotheses derived from social and experiential learning theories, we meta-analytically investigated how safety training and workplace hazards impact the development of safety knowledge and safety performance. The results were consistent with an expected interaction between the level of engagement of safety training and hazardous event/exposure severity in the promotion of safety knowledge and performance. For safety knowledge and safety performance, highly engaging training was considerably more effective than less engaging training when hazardous event/exposure severity was high, whereas highly and less engaging training had comparable levels of effectiveness when hazardous event/exposure severity was low. Implications of these findings for theory testing and incorporating information on objective risk into workplace safety research and practice are discussed.

Safety Training--A Special Case?

ERIC Educational Resources Information Center

Cooper, Mark; Cotton, David

2000-01-01

Review of research on industrial training and occupational safety and health did not find materials on training safely or risk assessment for training. A study of 34 safety inspectors indicated that risk decision making and assessment are serious concerns that should be addressed in safety training. (Contains 56 references.) (SK)

Reinventing Biostatistics Education for Basic Scientists

PubMed Central

Weissgerber, Tracey L.; Garovic, Vesna D.; Milin-Lazovic, Jelena S.; Winham, Stacey J.; Obradovic, Zoran; Trzeciakowski, Jerome P.; Milic, Natasa M.

2016-01-01

Numerous studies demonstrating that statistical errors are common in basic science publications have led to calls to improve statistical training for basic scientists. In this article, we sought to evaluate statistical requirements for PhD training and to identify opportunities for improving biostatistics education in the basic sciences. We provide recommendations for improving statistics training for basic biomedical scientists, including: 1. Encouraging departments to require statistics training, 2. Tailoring coursework to the students’ fields of research, and 3. Developing tools and strategies to promote education and dissemination of statistical knowledge. We also provide a list of statistical considerations that should be addressed in statistics education for basic scientists. PMID:27058055

Effects of obligatory training and prior training experience on attitudes towards performing basic life support: a questionnaire survey.

PubMed

Matsubara, Hiroki; Enami, Miki; Hirose, Keiko; Kamikura, Takahisa; Nishi, Taiki; Takei, Yutaka; Inaba, Hideo

2015-04-01

To determine the effect of Japanese obligatory basic life support training for new driver's license applicants on their willingness to carry out basic life support. We distributed a questionnaire to 9,807 participants of basic life support courses in authorized driving schools from May 2007 to April 2008 after the release of the 2006 Japanese guidelines. The questionnaire explored the participants' willingness to perform basic life support in four hypothetical scenarios: cardiopulmonary resuscitation on one's own initiative; compression-only cardiopulmonary resuscitation following telephone cardiopulmonary resuscitation; early emergency call; and use of an automated external defibrillator. The questionnaire was given at the beginning of the basic life support course in the first 6-month term and at the end in the second 6-month term. The 9,011 fully completed answer sheets were analyzed. The training significantly increased the proportion of respondents willing to use an automated external defibrillator and to perform cardiopulmonary resuscitation on their own initiative in those with and without prior basic life support training experience. It significantly increased the proportion of respondents willing to carry out favorable actions in all four scenarios. In multiple logistic regression analysis, basic life support training and prior training experiences within 3 years were associated with the attitude. The analysis of reasons for unwillingness suggested that the training reduced the lack of confidence in their skill but did not attenuate the lack of confidence in detection of arrest or clinical judgment to initiate a basic life support action. Obligatory basic life support training should be carried out periodically and modified to ensure that participants gain confidence in judging and detecting cardiac arrest.

Occupational safety training and practices in selected vocational training institutions and workplaces in Kampala, Uganda.

PubMed

Kintu, Denis; Kyakula, Michael; Kikomeko, Joseph

2015-01-01

Several industrial accidents, some of them fatal, have been reported in Uganda. Causes could include training gaps in vocational training institutions (VTIs) and workplaces. This study investigated how occupational safety training in VTIs and workplaces is implemented. The study was carried out in five selected VTIs and workplaces in Kampala. Data were collected from instructors, workshop technicians, students, workshop managers, production supervisors, machine operators and new technicians in the workplaces. A total of 35 respondents participated in the study. The results revealed that all curricula in VTIs include a component of safety but little is practiced in VTI workshops; in workplaces no specific training content was followed and there were no regular consultations between VTIs and industry on safety skills requirements, resulting in a mismatch in safety skills training. The major constraints to safety training include inadequate funds to purchase safety equipment and inadequate literature on safety.

28 CFR 345.83 - Job safety training.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 28 Judicial Administration 2 2013-07-01 2013-07-01 false Job safety training. 345.83 Section 345... INDUSTRIES (FPI) INMATE WORK PROGRAMS FPI Inmate Training and Scholarship Programs § 345.83 Job safety training. FPI provides inmates with regular job safety training which is developed and scheduled in...

28 CFR 345.83 - Job safety training.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 28 Judicial Administration 2 2014-07-01 2014-07-01 false Job safety training. 345.83 Section 345... INDUSTRIES (FPI) INMATE WORK PROGRAMS FPI Inmate Training and Scholarship Programs § 345.83 Job safety training. FPI provides inmates with regular job safety training which is developed and scheduled in...

28 CFR 345.83 - Job safety training.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 28 Judicial Administration 2 2012-07-01 2012-07-01 false Job safety training. 345.83 Section 345... INDUSTRIES (FPI) INMATE WORK PROGRAMS FPI Inmate Training and Scholarship Programs § 345.83 Job safety training. FPI provides inmates with regular job safety training which is developed and scheduled in...

28 CFR 345.83 - Job safety training.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 28 Judicial Administration 2 2011-07-01 2011-07-01 false Job safety training. 345.83 Section 345... INDUSTRIES (FPI) INMATE WORK PROGRAMS FPI Inmate Training and Scholarship Programs § 345.83 Job safety training. FPI provides inmates with regular job safety training which is developed and scheduled in...

28 CFR 345.83 - Job safety training.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Job safety training. 345.83 Section 345... INDUSTRIES (FPI) INMATE WORK PROGRAMS FPI Inmate Training and Scholarship Programs § 345.83 Job safety training. FPI provides inmates with regular job safety training which is developed and scheduled in...

Examining the Efficacy of a Basic Functional Behavioral Assessment Training Package for School Personnel

ERIC Educational Resources Information Center

Loman, Sheldon L.; Horner, Robert H.

2014-01-01

This study evaluated the effects of manualized training in "Basic" functional behavioral assessment (FBA) for typical school professionals on the ability of these professionals to complete technically adequate FBAs. Twelve school professionals participated in four 1-hr training sessions using the Basic FBA training handbook. After…

The development and implementation of cockpit resource management in UAL recurrent training

NASA Technical Reports Server (NTRS)

Shroyer, David H.

1987-01-01

Line Oriented Flight Training (LOFT) for United Airlines started in 1976. At that time it was basically no more than a line-simulated training function conducted in a full-mission simulator with no attention or stress on its human factor content. Very soon after the implementation of the LOFT program concerns were voiced about certain crew behavioral situations they were observing in the flight crew's execution of cockpit duties. These duties involved emergency procedures as well as irregular and normal procedures and situations. It was evident that new information was surfacing concerning crew interaction, or its lack thereof, in the cockpit and its effect on satisfactory performance. These observations naturally raised the question of how this information translated into the safety of aircraft operations. A training system had to be repetitive, the crew interactive, and the training had to be conducted under the crew concept. The foundation had to have two other factors: (1) it was necessary to have adequate human factor content, and (2) an advanced state-of-the-art simulator and appropriate electronic devices were required. These concepts are further discussed.

Surgical simulation in orthopaedic skills training.

PubMed

Atesok, Kivanc; Mabrey, Jay D; Jazrawi, Laith M; Egol, Kenneth A

2012-07-01

Mastering rapidly evolving orthopaedic surgical techniques requires a lengthy period of training. Current work-hour restrictions and cost pressures force trainees to face the challenge of acquiring more complex surgical skills in a shorter amount of time. As a result, alternative methods to improve the surgical skills of orthopaedic trainees outside the operating room have been developed. These methods include hands-on training in a laboratory setting using synthetic bones or cadaver models as well as software tools and computerized simulators that enable trainees to plan and simulate orthopaedic operations in a three-dimensional virtual environment. Laboratory-based training offers potential benefits in the development of basic surgical skills, such as using surgical tools and implants appropriately, achieving competency in procedures that have a steep learning curve, and assessing already acquired skills while minimizing concerns for patient safety, operating room time, and financial constraints. Current evidence supporting the educational advantages of surgical simulation in orthopaedic skills training is limited. Despite this, positive effects on the overall education of orthopaedic residents, and on maintaining the proficiency of practicing orthopaedic surgeons, are anticipated.

[Basic psychosomatic care in ophthalmology. Relevance, training and case examples].

PubMed

Brumm, G; Schnell, S

2016-02-01

The incidence of psychosomatic disorders and their impact on society are increasing. Many patients suffer from psychosomatic symptoms. Medical studies and most notably medical training for ophthalmologists do not sufficiently cover these topics and do not adequately prepare doctors for dealing with patients suffering from psychosomatic disorders. Training in basic psychosomatic care can be absolved by all physicians irrespective of specialization. The structure, benefits and importance of this professional training are explained. The curriculum of the German Medical Association forms the basis of training in basic psychosomatic care. The personal experiences of the authors after completing the training as well as case studies are presented. Training in basic psychosomatic care conveys practical skills for dealing with patients with psychosomatic symptoms, which are often not acquired during medical training for ophthalmologists, where technical procedures predominate. Thus the professional ability is broadened with an immediate positive effect not only on the physician-patient relationship but also on the professional and private environment. Training in basic psychosomatic care should be obligatory in the specialist training of ophthalmologists.

Promoting individual learning for trainees with perceived high helplessness: experiences of a safety training program.

PubMed

Kiani, Fariba; Khodabakhsh, Mohamad Reza

2014-01-01

The article arises from a research project investigating the effectiveness of safety training on changing attitudes toward safety issues. Followed by the training intervention was observed that employees' helplessness decreased. The researchers have come to the idea of investigating how safety training can reduce perceived helplessness. Thus, this research examined the effectiveness of safety training on reducing employees' helplessness with attention to the mediating role of attitude toward safety issues. The current study was an experimental study with the control group. A total of 204 (101 experimental group and 103 control group) completed safety attitude questionnaire and perceived helplessness before a safety training course including four 90-min sessions over 4 consecutive days in Esfahan Steel Company in 2012 between October and December. Only members of the experimental group participated in this course. These questionnaires, approximately 30 days later, again were run on members of both groups. Data were analyzed using descriptive indexes, t-, and F-test. RESULTS by comparing the two groups showed that safety training was effective only on individuals with perceived low helplessness (p = 0.02). In individuals with perceived high helplessness, safety training only with changing safety attitudes can reduce the perceived helplessness.

38 CFR 21.9505 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... (Authority: 38 U.S.C. 3034(a), 3323(a), 3680(g)) Entry level and skill training means— (1) Basic Combat Training and Advanced Individual Training for members of the Army; (2) Recruit Training (Boot Camp) and Skill Training (“A” School) for members of the Navy; (3) Basic Military Training and Technical Training...

75 FR 52737 - Pesticide Product Registrations; Unconditional and Conditional Approvals

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-27

... extent of potential exposure. Based on these reviews, the Agency was able to make basic health and safety.... Based on these reviews, the Agency was able to make basic health and safety determinations that show use.... Based on these reviews, the Agency was able to make basic health and safety determinations that show use...

Laparoscopic skills acquisition: a study of simulation and traditional training.

PubMed

Marlow, Nicholas; Altree, Meryl; Babidge, Wendy; Field, John; Hewett, Peter; Maddern, Guy J

2014-12-01

Training in basic laparoscopic skills can be undertaken using traditional methods, where trainees are educated by experienced surgeons through a process of graduated responsibility or by simulation-based training. This study aimed to assess whether simulation trained individuals reach the same level of proficiency in basic laparoscopic skills as traditional trained participants when assessed in a simulated environment. A prospective study was undertaken. Participants were allocated to one of two cohorts according to surgical experience. Participants from the inexperienced cohort were randomized to receive training in basic laparoscopic skills on either a box trainer or a virtual reality simulator. They were then assessed on the simulator on which they did not receive training. Participants from the experienced cohort, considered to have received traditional training in basic laparoscopic skills, did not receive simulation training and were randomized to either the box trainer or virtual reality simulator for skills assessment. The assessment scores from different cohorts on either simulator were then compared. A total of 138 participants completed the assessment session, 101 in the inexperienced simulation-trained cohort and 37 on the experienced traditionally trained cohort. There was no statistically significant difference between the training outcomes of simulation and traditionally trained participants, irrespective of the simulator type used. The results demonstrated that participants trained on either a box trainer or virtual reality simulator achieved a level of basic laparoscopic skills assessed in a simulated environment that was not significantly different from participants who had been traditionally trained in basic laparoscopic skills. © 2013 Royal Australasian College of Surgeons.

Developing effective worker health and safety training materials: hazard awareness, identification, recognition, and control for the salon industry.

PubMed

Mayer, Annyce S; Brazile, William J; Erb, Samantha; Autenrieth, Daniel A; Serrano, Katherine; Van Dyke, Michael V

2015-05-01

In addition to formaldehyde, workers in salons can be exposed to other chemical irritants, sensitizers, carcinogens, reproductive hazards, infectious agents, ergonomic, and other physical hazards. Worker health and safety training is challenging because of current product labeling practices and the myriad of hazards portending risk for a wide variety of health effects. Through a Susan B. Harwood Targeted Topic Training grant from the Occupational Safety and Health Administration and assistance from salon development and training partners, we developed, delivered, and validated a health and safety training program using an iterative five-pronged approach. The training was well received and resulted in knowledge gain, improved workplace safety practices, and increased communication about health and safety. These training materials are available for download from the Occupational Safety and Health Administration's Susan B. Harwood Training Grant Program Web site.

Endoscopic non-technical skills team training: the next step in quality assurance of endoscopy training.

PubMed

Matharoo, Manmeet; Haycock, Adam; Sevdalis, Nick; Thomas-Gibson, Siwan

2014-12-14

To investigate whether novel, non-technical skills training for Bowel Cancer Screening (BCS) endoscopy teams enhanced patient safety knowledge and attitudes. A novel endoscopy team training intervention for BCS teams was developed and evaluated as a pre-post intervention study. Four multi-disciplinary BCS teams constituting BCS endoscopist(s), specialist screening practitioners, endoscopy nurses and administrative staff (A) from English BCS training centres participated. No patients were involved in this study. Expert multidisciplinary faculty delivered a single day's training utilising real clinical examples. Pre and post-course evaluation comprised participants' patient safety awareness, attitudes, and knowledge. Global course evaluations were also collected. Twenty-three participants attended and their patient safety knowledge improved significantly from 43%-55% (P ≤ 0.001) following the training intervention. 12/41 (29%) of the safety attitudes items significantly improved in the areas of perceived patient safety knowledge and awareness. The remaining safety attitude items: perceived influence on patient safety, attitudes towards error management, error management actions and personal views following an error were unchanged following training. Both qualitative and quantitative global course evaluations were positive: 21/23 (91%) participants strongly agreed/agreed that they were satisfied with the course. Qualitative evaluation included mandating such training for endoscopy teams outside BCS and incorporating team training within wider endoscopy training. Limitations of the study include no measure of increased patient safety in clinical practice following training. A novel comprehensive training package addressing patient safety, non-technical skills and adverse event analysis was successful in improving multi-disciplinary teams' knowledge and safety attitudes.

Endoscopic non-technical skills team training: The next step in quality assurance of endoscopy training

PubMed Central

Matharoo, Manmeet; Haycock, Adam; Sevdalis, Nick; Thomas-Gibson, Siwan

2014-01-01

AIM: To investigate whether novel, non-technical skills training for Bowel Cancer Screening (BCS) endoscopy teams enhanced patient safety knowledge and attitudes. METHODS: A novel endoscopy team training intervention for BCS teams was developed and evaluated as a pre-post intervention study. Four multi-disciplinary BCS teams constituting BCS endoscopist(s), specialist screening practitioners, endoscopy nurses and administrative staff (A) from English BCS training centres participated. No patients were involved in this study. Expert multidisciplinary faculty delivered a single day’s training utilising real clinical examples. Pre and post-course evaluation comprised participants’ patient safety awareness, attitudes, and knowledge. Global course evaluations were also collected. RESULTS: Twenty-three participants attended and their patient safety knowledge improved significantly from 43%-55% (P ≤ 0.001) following the training intervention. 12/41 (29%) of the safety attitudes items significantly improved in the areas of perceived patient safety knowledge and awareness. The remaining safety attitude items: perceived influence on patient safety, attitudes towards error management, error management actions and personal views following an error were unchanged following training. Both qualitative and quantitative global course evaluations were positive: 21/23 (91%) participants strongly agreed/agreed that they were satisfied with the course. Qualitative evaluation included mandating such training for endoscopy teams outside BCS and incorporating team training within wider endoscopy training. Limitations of the study include no measure of increased patient safety in clinical practice following training. CONCLUSION: A novel comprehensive training package addressing patient safety, non-technical skills and adverse event analysis was successful in improving multi-disciplinary teams’ knowledge and safety attitudes. PMID:25516665

A Feasibility Study of Computer Assisted Instruction in US Army Basic Electronics Training. Final Report.

ERIC Educational Resources Information Center

International Business Machines Corp., Gaithersburg, MD. Federal Systems Div.

A study of computer-assisted instruction (CAI) for US Army basic electronics training at the US Army Signal Center and School establishes the feasibility of CAI as a training technique. Three aspects of CAI are considered: effectiveness, efficiency, and applicability of CAI to basic electronics training. The study explores the effectiveness of the…

Basic science research in urology training.

PubMed

Eberli, D; Atala, A

2009-04-01

The role of basic science exposure during urology training is a timely topic that is relevant to urologic health and to the training of new physician scientists. Today, researchers are needed for the advancement of this specialty, and involvement in basic research will foster understanding of basic scientific concepts and the development of critical thinking skills, which will, in turn, improve clinical performance. If research education is not included in urology training, future urologists may not be as likely to contribute to scientific discoveries.Currently, only a minority of urologists in training are currently exposed to significant research experience. In addition, the number of physician-scientists in urology has been decreasing over the last two decades, as fewer physicians are willing to undertake a career in academics and perform basic research. However, to ensure that the field of urology is driving forward and bringing novel techniques to patients, it is clear that more research-trained urologists are needed. In this article we will analyse the current status of basic research in urology training and discuss the importance of and obstacles to successful addition of research into the medical training curricula. Further, we will highlight different opportunities for trainees to obtain significant research exposure in urology.

Education and Training Module in Alertness Management

NASA Technical Reports Server (NTRS)

Mallis, M. M.; Brandt, S. L.; Oyung, R. L.; Reduta, D. D.; Rosekind, M. R.

2006-01-01

The education and training module (ETM) in alertness management has now been integrated as part of the training regimen of the Pilot Proficiency Awards Program ("WINGS") of the Federal Aviation Administration. Originated and now maintained current by the Fatigue Countermeasures Group at NASA Ames Research Center, the ETM in Alertness Management is designed to give pilots the benefit of the best and most recent research on the basics of sleep physiology, the causes of fatigue, and strategies for managing alertness during flight operations. The WINGS program is an incentive program that encourages pilots at all licensing levels to participate in recurrent training, upon completion of which distinctive lapel or tie pins (wings) and certificates of completion are awarded. In addition to flight training, all WINGS applicants must attend at least one FAA-sponsored safety seminar, FAA-sanctioned safety seminar, or industry recurrent training program. The Fatigue Countermeasures Group provides an FAA-approved industry recurrent training program through an on-line General Aviation (GA) WINGS ETM in alertness management to satisfy this requirement. Since 1993, the Fatigue Countermeasures Group has translated fatigue and alertness information to operational environments by conducting two-day ETM workshops oriented primarily toward air-carrier operations subject to Part 121 of the Federal Aviation Regulations pertaining to such operations. On the basis of the information presented in the two-day ETM workshops, an ETM was created for GA pilots and was transferred to a Web-based version. To comply with the requirements of the WINGS Program, the original Web-based version has been modified to include hypertext markup language (HTML) content that makes information easily accessible, in-depth testing of alertness-management knowledge, new interactive features, and increased informational resources for GA pilots. Upon successful completion of this training module, a participant receives a computer- screen display of a certificate of completion. The certificate, which includes the pilot s name and an identifying number, can be printed out and submitted, for ground training credit, with the pilot s WINGS application.

Exercise training modalities in chronic heart failure: does high intensity aerobic interval training make the difference?

PubMed

Giallauria, Francesco; Smart, Neil Andrew; Cittadini, Antonio; Vigorito, Carlo

2016-10-14

Exercise training (ET) is strongly recommended in patients with chronic heart failure (CHF). Moderate-intensity aerobic continuous ET is the best established training modality in CHF patients. In the last decade, however, high-intensity interval exercise training (HIIT) has aroused considerable interest in cardiac rehabilitation community. Basically, HIIT consists of repeated bouts of high-intensity exercise alternated with recovery periods. In CHF patients, HIIT exerts larger improvements in exercise capacity compared to moderate-continuous ET. These results are intriguing, mostly considering that better functional capacity translates into an improvement of symptoms and quality of life. Notably, HIIT did not reveal major safety issues; although CHF patients should be clinically stable, have had recent exposure to at least regular moderate-intensity exercise, and appropriate supervision and monitoring during and after the exercise session are mandatory. The impact of HIIT on cardiac dimensions and function and on endothelial function remains uncertain. HIIT should not replace other training modalities in heart failure but should rather complement them. Combining and tailoring different ET modalities according to each patient's baseline clinical characteristics (i.e. exercise capacity, personal needs, preferences and goals) seem the most astute approach to exercise prescription.

Predoctoral and Postdoctoral Education on Cone-Beam Computed Tomography.

PubMed

Buchanan, Allison; Thachil, Karan; Haggard, Chris; Kalathingal, Sajitha

2017-12-01

As the use of cone beam computed tomography (CBCT) in dentistry continues to grow, questions related to appropriate radiation safety, training, and interpretation arise. Recognizing this need, the American Dental Association published an advisory statement for the safe use of CBCT in dentistry and recommended that guidelines for appropriate training be established. The purpose of this study was to assess radiation safety concerns related to CBCT and identify voids in current education on CBCT for the predoctoral dental curriculum and continuing dental education. A survey was mailed to general practitioners, oral surgeons, and periodontists in the Georgia Dental Association (n = 415). One hundred twenty-one surveys were received for a response rate of 29%. Sixty-eight percent of practitioners reported using CBCT, with 89% having used it for over 2 years. Few (12.4%) had experience with CBCT in dental school. Interest in continuing dental education on CBCT was reported at 59.8% and 43.6% for current users and nonusers of CBCT, respectively. Approximately 50% reported using precautionary radiation safety measures, and the methods used were varied. Although a higher survey return rate would allow for stronger evidence, this project identified some areas of education voids including radiation safety and the factors that contribute to patient dose; CBCT basics including instruction on the limitations of CBCT; CBCT anatomy and pathology with additional time dedicated to the paranasal sinuses; and interpretation. Copyright © 2017 Elsevier Inc. All rights reserved.

Meta-analysis of food safety training on hand hygiene knowledge and attitudes among food handlers.

PubMed

Soon, Jan Mei; Baines, Richard; Seaman, Phillip

2012-04-01

Research has shown that traditional food safety training programs and strategies to promote hand hygiene increases knowledge of the subject. However, very few studies have been conducted to evaluate the impact of food safety training on food handlers' attitudes about good hand hygiene practices. The objective of this meta-analytical study was to assess the extent to which food safety training or intervention strategies increased knowledge of and attitudes about hand hygiene. A systematic review of food safety training articles was conducted. Additional studies were identified from abstracts from food safety conferences and food science education conferences. Search terms included combinations of "food safety," "food hygiene," "training," "education," "hand washing," "hand hygiene," "knowledge," "attitudes," "practices," "behavior," and "food handlers." Only before- and after-training approaches and cohort studies with training (intervention group) and without training (control group) in hand hygiene knowledge and including attitudes in food handlers were evaluated. All pooled analyses were based on a random effects model. Meta-analysis values for nine food safety training and intervention studies on hand hygiene knowledge among food handlers were significantly higher than those of the control (without training), with an effect size (Hedges' g) of 1.284 (95% confidence interval [CI] ∼ 0.830 to 1.738). Meta-analysis of five food safety training and intervention studies in which hand hygiene attitudes and self-reported practices were monitored produced a summary effect size of 0.683 (95% CI ∼ 0.523 to 0.843). Food safety training increased knowledge and improved attitudes about hand hygiene practices. Refresher training and long-term reinforcement of good food handling behaviors may also be beneficial for sustaining good hand washing practices.

Fact or Infection: Do Surgical Trainees Know Enough About Infection Control?

PubMed Central

Brady, RRW; McDermott, C; Gibb, AP; Paterson-Brown, S

2008-01-01

INTRODUCTION There exists a high level of non-compliance with basic infection control measures by medical staff. One explanation may be a lack of familiarity with contemporary infection control guidelines. As surgical trainees represent a key group of stakeholders responsible for the delivery of recommended infection control practice, we assessed knowledge of infection control guidelines amongst current UK surgical trainees. MATERIALS AND METHODS Without warning, during the annual meeting of the UK Association of Surgeons in Training (ASiT), participating surgical trainees were asked to complete a questionnaire examining their basic knowledge of infection control and methicillin-resistant Staphylococcus aureus (MRSA) based on recently published guidelines. RESULTS A total of 52 trainees (13 higher surgical trainees [HSTs]; 39 basic surgical trainees [BSTs]) returned completed questionnaires in the study. BSTs demonstrated a higher level of knowledge of infection control, outperforming the HSTs in 7 out of 11 questions. Of surgical trainees, 61.5% were misinformed regarding the prevalence of MRSA blood-stream infections and 69% were unaware of policies for transfer of MRSA-positive patients. Analysis revealed areas of concern in regards to an adequate general level of knowledge of infection control in surgical trainees, particularly in some key areas. CONCLUSIONS To ensure patient safety and reduce hospital-acquired infections, it is vital that focused, co-ordinated programmes of education, in this rapidly changing field, are prioritised and formalised into surgical training, selection and assessment. PMID:18990279

Promoting Individual Learning for Trainees with Perceived High Helplessness: Experiences of a Safety Training Program

PubMed Central

Kiani, Fariba; Khodabakhsh, Mohamad Reza

2014-01-01

Objective: The article arises from a research project investigating the effectiveness of safety training on changing attitudes toward safety issues. Followed by the training intervention was observed that employees’ helplessness decreased. The researchers have come to the idea of investigating how safety training can reduce perceived helplessness. Thus, this research examined the effectiveness of safety training on reducing employees’ helplessness with attention to the mediating role of attitude toward safety issues. Methods: The current study was an experimental study with the control group. A total of 204 (101 experimental group and 103 control group) completed safety attitude questionnaire and perceived helplessness before a safety training course including four 90-min sessions over 4 consecutive days in Esfahan Steel Company in 2012 between October and December. Only members of the experimental group participated in this course. These questionnaires, approximately 30 days later, again were run on members of both groups. Data were analyzed using descriptive indexes, t-, and F-test. Results: Results by comparing the two groups showed that safety training was effective only on individuals with perceived low helplessness (p = 0.02). Conclusion: In individuals with perceived high helplessness, safety training only with changing safety attitudes can reduce the perceived helplessness. PMID:25798170

How many employees receive safety training during their first year of a new job?

PubMed

Smith, Peter M; Mustard, Cameron A

2007-02-01

To describe the provision of safety training to Canadian employees, specifically those in their first year of employment with a new employer. Three repeated national Canadian cross-sectional surveys. 59 159 respondents from Statistics Canada's Workplace and Employee Surveys (1999, 2001 and 2003), 5671 who were in their first year of employment. Receiving occupational health and safety training, orientation training or office or non-office equipment training in either a classroom or on-the-job in the previous 12 months. Only 12% of women and 16% of men reported receiving safety training in the previous 12 months. Employees in their first 12 months of employment were more likely to receive safety training than employees with >5 years of job tenure. However, still only one in five new employees had received any safety training while with their current employer. In a fully adjusted regression model, employees who had access to family and support programs, women in medium-sized workplaces and in manufacturing, and men in large workplaces and in part-time employment all had an increased probability of receiving safety training. No increased likelihood of safety training was found in younger workers or those in jobs with higher physical demands, both of which are associated with increased injury risk. From our results, it would appear that only one in five Canadian employees in their first year of a new job received safety training. Further, the provision of safety training does not appear to be more prevalent among workers or in occupations with increased risk of injuries.

Nonfatal road traffic injuries: can road safety campaigns prevent hazardous behavior? An Italian experience.

PubMed

Zampetti, R; Messina, G; Quercioli, C; Vencia, F; Genco, L; Di Bartolomeo, L; Nante, N

2013-01-01

Road traffic injuries are a widespread problem and are very difficult to prevent. The purpose of this study was to verify whether intensive versus basic road safety education programs are associated with different incidence and severity of nonfatal road injuries. The study had an ecological design and involved Local Health Authority One (LHA1) in Salerno, Italy, which includes 20 municipalities. Data on nonfatal road injuries occurring in the periods June to August 2003 and June to August 2008 were obtained from trained operators through the information system of the emergency department. All 20 municipalities received a basic community road safety education program (publicity campaign using bill-posting, brochures, mass media communication with press conferences, articles in local papers, radio and television interviews, and a dedicated LHA1 web site), and 12 municipalities also received an intensive education campaign (in secondary schools, community conferences, and activities organized by police and firefighters). The incidence and severity of nonfatal road traffic injuries were compared between June to August 2003 (before the campaign) and June to August 2008. The total number of injuries in all 20 municipalities in 2003 and 2008 was 907 and 755, respectively. The incidence of injuries decreased in the study period both in the 8 municipalities where only the basic campaign was run (difference in incidence = -0.4; P = .053) and in the 12 municipalities where the intensive campaign was implemented (difference in incidence = -0.5; P < .001); focusing on severity, the incidence of severe injuries decreased or remained the same in the study period in the 2 studied group. The results are coherent with other European studies and show that an overall downward trend exists but is presumably not a direct consequence of road safety education. This does not mean that such campaigns are useless (they are important to raise awareness) but that they should be supplemented with complementary activities in order to be really effective.

Surgical ergonomics. Analysis of technical skills, simulation models and assessment methods.

PubMed

Papaspyros, Sotiris C; Kar, Ashok; O'Regan, David

2015-06-01

Over the past two centuries the surgical profession has undergone a profound evolution in terms of efficiency and outcomes. Societal concerns in relation to quality assurance, patient safety and cost reduction have highlighted the issue of training expert surgeons. The core elements of a training model build on the basic foundations of gross and fine motor skills. In this paper we provide an analysis of the ergonomic principles involved and propose relevant training techniques. We have endeavored to provide both the trainer and trainee perspectives. This paper is structured into four sections: 1) Pre-operative preparation issues, 2) technical skills and instrument handling, 3) low fidelity simulation models and 4) discussion of current concepts in crew resource management, deliberate practice and assessment. Rehearsal, warm-up and motivation-enhancing techniques aid concentration and focus. Appropriate posture, comprehension of ergonomic principles in relation to surgical instruments and utilisation of the non-dominant hand are essential skills to master. Low fidelity models can be used to achieve significant progress through the early stages of the learning curve. Deliberate practice and innate ability are complementary to each other and may be considered useful adjuncts to surgical skills development. Safe medical care requires that complex patient interventions be performed by highly skilled operators supported by reliable teams. Surgical ergonomics lie at the heart of any training model that aims to produce professionals able to function as leaders of a patient safety oriented culture. Copyright © 2015 IJS Publishing Group Limited. Published by Elsevier Ltd. All rights reserved.

Improving basic life support training for medical students.

PubMed

Lami, Mariam; Nair, Pooja; Gadhvi, Karishma

2016-01-01

Questions have been raised about basic life support (BLS) training in medical education. This article addresses the research evidence behind why BLS training is inadequate and suggests recommendations for improving BLS training for medical students.

Anaesthesia in austere environments: literature review and considerations for future space exploration missions.

PubMed

Komorowski, Matthieu; Fleming, Sarah; Mawkin, Mala; Hinkelbein, Jochen

2018-01-01

Future space exploration missions will take humans far beyond low Earth orbit and require complete crew autonomy. The ability to provide anaesthesia will be important given the expected risk of severe medical events requiring surgery. Knowledge and experience of such procedures during space missions is currently extremely limited. Austere and isolated environments (such as polar bases or submarines) have been used extensively as test beds for spaceflight to probe hazards, train crews, develop clinical protocols and countermeasures for prospective space missions. We have conducted a literature review on anaesthesia in austere environments relevant to distant space missions. In each setting, we assessed how the problems related to the provision of anaesthesia (e.g., medical kit and skills) are dealt with or prepared for. We analysed how these factors could be applied to the unique environment of a space exploration mission. The delivery of anaesthesia will be complicated by many factors including space-induced physiological changes and limitations in skills and equipment. The basic principles of a safe anaesthesia in an austere environment (appropriate training, presence of minimal safety and monitoring equipment, etc.) can be extended to the context of a space exploration mission. Skills redundancy is an important safety factor, and basic competency in anaesthesia should be part of the skillset of several crewmembers. The literature suggests that safe and effective anaesthesia could be achieved by a physician during future space exploration missions. In a life-or-limb situation, non-physicians may be able to conduct anaesthetic procedures, including simplified general anaesthesia.

FY 1991 safety program status report

NASA Technical Reports Server (NTRS)

1991-01-01

In FY 1991, the NASA Safety Division continued efforts to enhance the quality and productivity of its safety oversight function. Recent initiatives set forth in areas such as training, risk management, safety assurance, operational safety, and safety information systems have matured into viable programs contributing to the safety and success of activities throughout the Agency. Efforts continued to develop a centralized intra-agency safety training program with establishment of the NASA Safety Training Center at the Johnson Space Center (JSC). The objective is to provide quality training for NASA employees and contractors on a broad range of safety-related topics. Courses developed by the Training Center will be presented at various NASA locations to minimize travel and reach the greatest number of people at the least cost. In FY 1991, as part of the ongoing efforts to enhance the total quality of NASA's safety work force, the Safety Training Center initiated development of a Certified Safety Professional review course. This course provides a comprehensive review of the skills and knowledge that well-rounded safety professionals must possess to qualify for professional certification. FY 1992 will see the course presented to NASA and contractor employees at all installations via the NASA Video Teleconference System.

IFKIS - a basis for managing avalanche risk in settlements and on roads in Switzerland

NASA Astrophysics Data System (ADS)

Bründl, M.; Etter, H.-J.; Steiniger, M.; Klingler, Ch.; Rhyner, J.; Ammann, W. J.

2004-04-01

After the avalanche winter of 1999 in Switzerland, which caused 17 deaths and damage of over CHF 600 mill. in buildings and on roads, the project IFKIS, aimed at improving the basics of organizational measures (closure of roads, evacuation etc.) in avalanche risk management, was initiated. The three main parts of the project were the development of a compulsory checklist for avalanche safety services, a modular education and training course program and an information system for safety services. The information system was developed in order to improve both the information flux between the national centre for avalanche forecasting, the Swiss Federal Institute for Snow and Avalanche Research SLF, and the local safety services on the one hand and the communication between avalanche safety services in the communities on the other hand. The results of this project make a valuable contribution to strengthening organizational measures in avalanche risk management and to closing the gaps, which became apparent during the avalanche winter of 1999. They are not restricted to snow avalanches but can also be adapted for dealing with other natural hazard processes and catastrophes.

E-Basics: Online Basic Training in Program Evaluation

ERIC Educational Resources Information Center

Silliman, Ben

2016-01-01

E-Basics is an online training in program evaluation concepts and skills designed for youth development professionals, especially those working in nonformal science education. Ten hours of online training in seven modules is designed to prepare participants for mentoring and applied practice, mastery, and/or team leadership in program evaluation.…

Basic Skills Support in Business and Industry.

ERIC Educational Resources Information Center

Byatt, Janet; Davies, Karen

This guide is designed as a tool for English and Welsh businesses wanting to provide basic skills training for their employees. It provides practical solutions to the problems of identifying employees' basic skills needs and selecting the best model of training delivery to address identified training needs. The introductory section discusses basic…

Review of Occupational Health and Safety Organization in Expanding Economies: The Case of Southern Africa.

PubMed

Moyo, Dingani; Zungu, Muzimkhulu; Kgalamono, Spoponki; Mwila, Chimba D

2015-01-01

Globally, access to occupational health and safety (OHS) by workers has remained at very low levels. The organization and implementation of OHS in South Africa, Zimbabwe, Zambia, and Botswana has remained at suboptimal levels. Inadequacy of human resource capital, training, and education in the field of OHS has had a major negative impact on the improvement of worker access to such services in expanding economies. South Africa, Zimbabwe, Zambia, and Botswana have expanding economies with active mining and agricultural activities that pose health and safety risks to the working population. A literature review and country systems inquiry on the organization of OHS services in the 4 countries was carried out. Because of the infancy and underdevelopment of OHS in southern Africa, literature on the status of this topic is limited. In the 4 countries under review, OHS services are a function shared either wholly or partially by 3 ministries, namely Health, Labor, and Mining. Other ministries, such as Environment and Agriculture, carry small fragments of OHS function. The 4 countries are at different stages of OHS legislative frameworks that guide the practice of health and safety in the workplace. Inadequacies in human resource capital and expertise in occupational health and safety are noted major constraints in the implementation and compliance to health and safety initiatives in the work place. South Africa has a more mature system than Zimbabwe, Zambia, and Botswana. Lack of specialized training in occupational health services, such as occupational medicine specialization for physicians, has been a major drawback in Zimbabwe, Zambia, and Botswana. The full adoption and success of OHS systems in Southern Africa remains constrained. Training and education in OHS, especially in occupational medicine, will enhance the development and maturation of occupational health in southern Africa. Capacitating primary health services with basic occupational health knowledge would be invaluable in bridging the current skills deficit. Introducing short courses and foundational tracks in occupational medicine for general medical practitioners would be invaluable. Copyright © 2015 Icahn School of Medicine at Mount Sinai. Published by Elsevier Inc. All rights reserved.

Comparison of Online and Traditional Basic Life Support Renewal Training Methods for Registered Professional Nurses.

PubMed

Serwetnyk, Tara M; Filmore, Kristi; VonBacho, Stephanie; Cole, Robert; Miterko, Cindy; Smith, Caitlin; Smith, Charlene M

2015-01-01

Basic Life Support certification for nursing staff is achieved through various training methods. This study compared three American Heart Association training methods for nurses seeking Basic Life Support renewal: a traditional classroom approach and two online options. Findings indicate that online methods for Basic Life Support renewal deliver cost and time savings, while maintaining positive learning outcomes, satisfaction, and confidence level of participants.

OSHA Training Programs. Module SH-48. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on OSHA (Occupational Safety and Health Act) training programs is one of 50 modules concerned with job safety and health. This module provides a list of OSHA training requirements and describes OSHA training programs and other safety organizations' programs. Following the introduction, 11 objectives (each keyed to a page in the…

Criticality Safety Evaluation for the TACS at DAF

DOE Office of Scientific and Technical Information (OSTI.GOV)

Percher, C. M.; Heinrichs, D. P.

2011-06-10

Hands-on experimental training in the physical behavior of multiplying systems is one of ten key areas of training required for practitioners to become qualified in the discipline of criticality safety as identified in DOE-STD-1135-99, Guidance for Nuclear Criticality Safety Engineer Training and Qualification. This document is a criticality safety evaluation of the training activities and operations associated with HS-3201-P, Nuclear Criticality 4-Day Training Course (Practical). This course was designed to also address the training needs of nuclear criticality safety professionals under the auspices of the NNSA Nuclear Criticality Safety Program1. The hands-on, or laboratory, portion of the course will utilizemore » the Training Assembly for Criticality Safety (TACS) and will be conducted in the Device Assembly Facility (DAF) at the Nevada Nuclear Security Site (NNSS). The training activities will be conducted by Lawrence Livermore National Laboratory following the requirements of an Integrated Work Sheet (IWS) and associated Safety Plan. Students will be allowed to handle the fissile material under the supervision of an LLNL Certified Fissile Material Handler.« less

The exploration of effects of Chinese cultural values on the attitudes and behaviors of Chinese restaurateurs toward food safety training.

PubMed

Liu, Pei; Kwon, Junehee

2013-06-01

Foodborne illness is a challenge in the production and service of ethnic foods. The purpose of the study described in this article was to explore variables influencing the behaviors of U.S. Chinese restaurant owners/operators regarding the provision of food safety training in their restaurants. Seventeen major Chinese cultural values were identified through individual interviews with 20 Chinese restaurant owners/operators. Most participants felt satisfied with their previous health inspections. Several expressed having difficulty, however, following the health inspectors' instructions and in understanding the health inspection report. A few participants provided food safety training to their employees due to state law. Lack of money, time, labor/energy, and a perceived need for food safety training were recognized as major challenges to providing food safety training in Chinese restaurants. Videos, case studies, and food safety training handbooks were the most preferred food safety training methods of Chinese restaurant owners/operators, and Chinese was the preferred language in which to conduct the training.

Evaluation of a safety training program in three food service companies.

PubMed

Sinclair, Raymond C; Smith, Randall; Colligan, Michael; Prince, Mary; Nguyen, Trang; Stayner, Leslie

2003-01-01

Outcome measures for safety training effectiveness research often do not include measures such as occupational injury experience. Effectiveness mediators also receive sparse attention. A new safety training curriculum was delivered to workers in a stratified random sample of food service facilities across three companies. A similar group of facilities received usual training. We collected post-test measures of demographic variables, safety knowledge, perceptions of transfer of training climate, and workers' compensation claim data for one year after the initial training activities. Knowledge test scores were apparently higher in the new-training units than in the usual-training units. Some demographic variables were inconsistently associated with these differences. Evidence for reduction of the injury rate associated with the new training was observed from two companies but only approached significance for one company. A second company revealed a similar but non-significant trend. Knowledge scores were not significantly associated with lower injury rates. We found evidence that safety training increases knowledge and reduces injuries. We found almost no evidence of effects of training effectiveness mediators, including no relationship between safety knowledge and injury experience. Methodological issues related to conducting a large study may have influenced these results. Although safety training leads to greater knowledge and, in some cases, reduced occupational injuries, the influence of mediating variables remains to be fully explained.

Microbiological Safety of Kitchen Sponges Used in Food Establishments

PubMed Central

Bacha, Ketema

2016-01-01

Kitchen sponges are among the possible sources of contaminants in food establishments. The main purpose of the current study was, therefore, to assess the microbiological safety of sponges as it has been used in selected food establishments of Jimma town. Accordingly, the microbiological safety of a total of 201 kitchen sponges randomly collected from food establishments was evaluated against the total counts of aerobic mesophilic bacteria (AMB), Enterobacteriaceae, coliforms, and yeast and molds. The mean counts of aerobic mesophilic bacteria ranged from 7.43 to 12.44 log CFU/mm3. The isolated genera were dominated by Pseudomonas (16.9%), Bacillus (11.1%), Micrococcus (10.6%), Streptococcus (7.8%), and Lactobacillus (6%) excluding the unidentified Gram positive rods (4.9%) and Gram negative rods (9.9%). The high microbial counts (aerobic mesophilic bacteria, coliforms, Enterobacteriaceae, and yeast and molds) reveal the existence of poor kitchen sponge sanitization practice. Awareness creation training on basic hygienic practices to food handlers and periodic change of kitchen sponges are recommended. PMID:27840819

How many employees receive safety training during their first year of a new job?

PubMed Central

Smith, Peter M; Mustard, Cameron A

2007-01-01

Objective To describe the provision of safety training to Canadian employees, specifically those in their first year of employment with a new employer. Design Three repeated national Canadian cross‐sectional surveys. Subjects 59 159 respondents from Statistics Canada's Workplace and Employee Surveys (1999, 2001 and 2003), 5671 who were in their first year of employment. Main outcome Receiving occupational health and safety training, orientation training or office or non‐office equipment training in either a classroom or on‐the‐job in the previous 12 months. Results Only 12% of women and 16% of men reported receiving safety training in the previous 12 months. Employees in their first 12 months of employment were more likely to receive safety training than employees with >5 years of job tenure. However, still only one in five new employees had received any safety training while with their current employer. In a fully adjusted regression model, employees who had access to family and support programs, women in medium‐sized workplaces and in manufacturing, and men in large workplaces and in part‐time employment all had an increased probability of receiving safety training. No increased likelihood of safety training was found in younger workers or those in jobs with higher physical demands, both of which are associated with increased injury risk. Conclusions From our results, it would appear that only one in five Canadian employees in their first year of a new job received safety training. Further, the provision of safety training does not appear to be more prevalent among workers or in occupations with increased risk of injuries. PMID:17296687

The JRC-ITU approach to the safety of advanced nuclear fuel cycles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fanghaenel, T.; Rondinella, V.V.; Somers, J.

2013-07-01

The JRC-ITU safety studies of advanced fuels and cycles adopt two main axes. First the full exploitation of still available and highly relevant knowledge and samples from past fuel preparation and irradiation campaigns (complementing the limited number of ongoing programmes). Secondly, the shift of focus from simple property measurement towards the understanding of basic mechanisms determining property evolution and behaviour of fuel compounds during normal, off-normal and accident conditions. The final objective of the second axis is the determination of predictive tools applicable to systems and conditions different from those from which they were derived. State of the art experimentalmore » facilities, extensive networks of partnerships and collaboration with other organizations worldwide, and a developing programme for training and education are essential in this approach. This strategy has been implemented through various programs and projects. The SUPERFACT programme constitutes the main body of existing knowledge on the behavior in-pile of MOX fuel containing minor actinides. It encompassed all steps of a closed fuel cycle. Another international project investigating the safety of a closed cycle is METAPHIX. In this case a U-Pu19-Zr10 metal alloy containing Np, Am and Cm constitutes the fuel. 9 test pins have been prepared and irradiated. In addition to the PIE (Post Irradiation Examination), pyrometallurgical separation of the irradiated fuel has been performed, to demonstrate all the steps of a multiple recycling closed cycle and characterize their safety relevant aspects. Basic studies like thermodynamic fuel properties, fuel-cladding-coolant interactions have also been carried out at JRC-ITU.« less

A novel perceptual discrimination training task: Reducing fear overgeneralization in the context of fear learning.

PubMed

Ginat-Frolich, Rivkah; Klein, Zohar; Katz, Omer; Shechner, Tomer

2017-06-01

Generalization is an adaptive learning mechanism, but it can be maladaptive when it occurs in excess. A novel perceptual discrimination training task was therefore designed to moderate fear overgeneralization. We hypothesized that improvement in basic perceptual discrimination would translate into lower fear overgeneralization in affective cues. Seventy adults completed a fear-conditioning task prior to being allocated into training or placebo groups. Predesignated geometric shape pairs were constructed for the training task. A target shape from each pair was presented. Thereafter, participants in the training group were shown both shapes and asked to identify the image that differed from the target. Placebo task participants only indicated the location of each shape on the screen. All participants then viewed new geometric pairs and indicated whether they were identical or different. Finally, participants completed a fear generalization test consisting of perceptual morphs ranging from the CS + to the CS-. Fear-conditioning was observed through physiological and behavioural measures. Furthermore, the training group performed better than the placebo group on the assessment task and exhibited decreased fear generalization in response to threat/safety cues. The findings offer evidence for the effectiveness of the novel discrimination training task, setting the stage for future research with clinical populations. Copyright © 2017 Elsevier Ltd. All rights reserved.

Private Security Training. Phase 1: Basic. Instructor Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This basic module on private security training was designed under the direction of the Oklahoma Council on Law Enforcement Education and Training to teach basic skills necessary for entry-level employment in this field. This module contains six instructional units that cover the following topics: (1) interpreting the Oklahoma Security Guard and…

[Autopsies for anatomical teaching and training in clinical forensic medicine].

PubMed

Hammer, U; Blaas, V; Büttner, A; Philipp, M

2015-12-01

Clinical forensic medicine does not only entail examination of patients after physical violence but also the option of clinical autopsies, e.g. after non-notifiable complications of medical interventions, after fatalities closely following medical interventions or fatalities as a result of injuries when the public prosecutor decides not to order a medicolegal autopsy. Based on this routine the Institute of Forensic Medicine at the University of Rostock offers a training course in topographical anatomy to physicians for further training in interventional and surgical disciplines. At the beginning of autopsies the participants can explore the approaches of interventional puncture techniques as well as surgical techniques and the basic topographical anatomy in small groups of 2-4 persons under the supervision of forensic examiners. The format is essentially oriented to the early further training period but fulfils the requirements for the exploration of complex operative techniques. The course was adapted for physicians and offered separately to students. The explorations are performed manually or by support with autopsy instruments. The courses offer an ideal room for individual, discipline-specific topics and result in a great benefit for all participants. A statistical assessment can only be achieved with a larger number of participants. Making autopsy rooms available for teaching and further training represents an additional feature to the profile of clinical forensic medicine. Lessons in topographical anatomy provide a great benefit for patient safety. It seems to be important to offer the opportunity to address individual interests in a closed meeting to consolidate skills and abilities in a non-judgemental environment. The post-mortem examiners have to ensure that the autopsy is carried out lege artis. Basic ethical principles and all regulations from an accredited scope have to be adhered to.

32 CFR 65.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

...-called `A' School). (3) In the case of members of the Air Force, Basic Military Training and Technical..., U.S.C. Entry Level and Skill Training. (1) In the case of members of the Army, Basic Combat Training and Advanced Individual Training, which includes members attending One Station Unit Training (OSUT...

WheelchairNet

MedlinePlus

... Basic training led by Padmaja Kankipati in Bangalore, India, May-June 2016 Participants at ISWP Hybrid-Basic training class, led by Padmaja Kankipati, SMOI, Bangalore, India, May-June 2016 ISWP Research and Training Coordinator ...

Injury during U.S. Army basic combat training: a systematic review of risk factor studies.

PubMed

Bulzacchelli, Maria T; Sulsky, Sandra I; Rodriguez-Monguio, Rosa; Karlsson, Lee H; Hill, Maj Owen T

2014-12-01

Approximately one quarter of men and half of women in U.S. Army basic combat training experience an injury. Preventing basic combat training-related injuries would reduce associated human and economic costs and discharges from the Army. Identification of risk factors for such injuries is a crucial step toward their prevention. Although some research has begun to address this need, prior studies of risk factors for training-related injury have not been reviewed systematically. This study systematically reviews the literature on risk factors for injury during U.S. Army basic combat training. Original studies of risk factors for injury during U.S. Army basic combat training published since 1990 in peer-reviewed journals were identified using PubMed and manual searches of reference lists. This search was last performed in May 2013. Nineteen studies met the inclusion criteria. Methodologic quality and potential for bias were assessed. The findings of 11 studies deemed to be of high or medium quality were synthesized to determine the level of evidence supporting the association between each risk factor studied and risk of injury during basic combat training. Quality assessment and evidence synthesis were performed from June to September 2013. There is strong or moderate evidence supporting association of older age, history of smoking, and self-rated low physical activity level prior to basic combat training with increased risk of training-related injury among male trainees. There is limited, mixed, or insufficient evidence to identify risk factors for injury among female trainees. Copyright © 2014 American Journal of Preventive Medicine. All rights reserved.

The transfer of safety training in work organizations: a systems perspective to continuous learning.

PubMed

Ford, J K; Fisher, S

1994-01-01

The effectiveness of safety and health programs can be evaluated from a "transfer" perspective, which evaluates the effectiveness of training in individual programs, and from a "systems" perspective that contends that a safety training program cannot be isolated from the organizational system of which it is a part. This chapter explores the effectiveness of training from a systems perspective and includes recommendations for improving safety and health training.

48 CFR 225.7402-4 - Law of war training.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Law of war training. 225... States 225.7402-4 Law of war training. (a) Basic training. Basic law of war training is required for all...=en-US. (b) Advanced law of war training. (1) The types of personnel that must obtain advanced law of...

48 CFR 225.7402-4 - Law of war training.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Law of war training. 225... States 225.7402-4 Law of war training. (a) Basic training. Basic law of war training is required for all...= en-US. (b) Advanced law of war training. (1) The types of personnel that must obtain advanced law of...

How Companies Respond to New Safety Regulations: A Canadian Investigation.

ERIC Educational Resources Information Center

Saari, J.; And Others

1993-01-01

A study of safety training programs in 66 Canadian companies found that those who provided tailor-made training already offered better working conditions, greater management involvement in safety work, and more safety activities than those who used outside training sources. This suggests that safety regulations benefit good companies more than…

The Dread Factor: How Hazards and Safety Training Influence Learning and Performance

ERIC Educational Resources Information Center

Burke, Michael J.; Salvador, Rommel O.; Smith-Crowe, Kristin; Chan-Serafin, Suzanne; Smith, Alexis; Sonesh, Shirley

2011-01-01

On the basis of hypotheses derived from social and experiential learning theories, we meta-analytically investigated how safety training and workplace hazards impact the development of safety knowledge and safety performance. The results were consistent with an expected interaction between the level of engagement of safety training and hazardous…

Teaching Health and Safety: Preparing Staff for the Unexpected.

ERIC Educational Resources Information Center

Cronin, Greg

1999-01-01

Discusses methods for training camp counselors in safety standards. Safety awareness and camp wellness should be introduced during staff interviews. During precamp training, staff should complete a test in OSHA requirements, followed by role playing to expand staff's knowledge in each OSHA safety and health area. First aid training, fire safety,…

Teaching Safety Skills to Children to Prevent Gun Play: An Evaluation of in Situ Training

ERIC Educational Resources Information Center

Miltenberger, Raymond G.; Gatheridge, Brian J.; Satterlund, Melisa; Egemo-Helm, Kristin R.; Johnson, Brigitte M.; Jostad, Candice; Kelso, Pamela; Flessner, Christopher A.

2005-01-01

This study evaluated behavioral skills training with added in situ training for teaching safety skills to prevent gun play. Following baseline, each child received two sessions of behavioral skills training and one in situ training session. Additional in situ training sessions were conducted until the child exhibited the safety skills (don't touch…

Pediatric emergency and essential surgical care in Zambian hospitals: a nationwide study.

PubMed

Bowman, Kendra G; Jovic, Goran; Rangel, Shawn; Berry, William R; Gawande, Atul A

2013-06-01

Pediatric surgical care in developing countries is not well studied. We sought to identify the range of pediatric surgery available, the barriers to provision, and level of safety of surgery performed for the entire pediatric population in Zambia. In cooperation with the Ministry of Health, we validated and adapted a World Health Organization instrument. During onsite visits, the availability of 32 emergency and essential surgical procedures relevant to children was surveyed. The availability of basic World Health Organization surgical safety criteria was determined. A single interviewer visited 103 (95%) of 108 surgical hospitals in Zambia and carried out 495 interviews. An average of 68% of the 32 emergency and essential surgical procedures was available (range 32%-100%). Lack of surgical skill was the primary reason for referral in 72% of procedure types, compared with 24%, 2% and 3% due to lack of equipment, supplies and anesthesia skills, respectively (p<0.001). Minimum pediatric surgical safety criteria were met by 14% of hospitals. The primary limitation to providing pediatric surgical care in Zambia is lack of surgical skills. Minimum safety standards were met by 14% of hospitals. Efforts to improve pediatric surgery should prioritize teaching surgical skills to expand access and providing safety training, equipment and supplies to increase safety. Copyright © 2013 Elsevier Inc. All rights reserved.

Basic science conferences in residency training: a national survey.

PubMed

Cruz, P D; Charley, M R; Bergstresser, P R

1987-02-01

Basic science teaching is an important component of dermatology residency training, and the basic science conference is the major tool utilized by departments of dermatology for its implementation. To characterize the role of basic science conferences in dermatology training, a national survey of chief residents was conducted. Although the survey confirmed that a high value is placed on basic science conferences, a surprising finding was a significant level of dissatisfaction among chief residents, particularly those from university-based programs. Results of the survey have been used to redefine our own objectives in basic science teaching and to propose elements of methodology and curriculum.

Virtual reality simulation: basic concepts and use in endoscopic neurosurgery training.

PubMed

Cohen, Alan R; Lohani, Subash; Manjila, Sunil; Natsupakpong, Suriya; Brown, Nathan; Cavusoglu, M Cenk

2013-08-01

Virtual reality simulation is a promising alternative to training surgical residents outside the operating room. It is also a useful aide to anatomic study, residency training, surgical rehearsal, credentialing, and recertification. Surgical simulation is based on a virtual reality with varying degrees of immersion and realism. Simulators provide a no-risk environment for harmless and repeatable practice. Virtual reality has three main components of simulation: graphics/volume rendering, model behavior/tissue deformation, and haptic feedback. The challenge of accurately simulating the forces and tactile sensations experienced in neurosurgery limits the sophistication of a virtual simulator. The limited haptic feedback available in minimally invasive neurosurgery makes it a favorable subject for simulation. Virtual simulators with realistic graphics and force feedback have been developed for ventriculostomy, intraventricular surgery, and transsphenoidal pituitary surgery, thus allowing preoperative study of the individual anatomy and increasing the safety of the procedure. The authors also present experiences with their own virtual simulation of endoscopic third ventriculostomy.

Space human factors publications: 1980-1990

NASA Technical Reports Server (NTRS)

Dickson, Katherine J.

1991-01-01

A 10 year cummulative bibliography of publications resulting from research supported by the NASA Space Human Factors Program of the Life Science Division is provided. The goal of this program is to understand the basic mechanisms underlying behavioral adaptation to space and to develop and validate system design requirements, protocols, and countermeasures to ensure the psychological well-being, safety, and productivity of crewmembers. Subjects encompassed by this bibliography include selection and training, group dynamics, psychophysiological interactions, habitability issues, human-machine interactions, psychological support measures, and anthropometric data. Principal Investigators whose research tasks resulted in publication are identified by asterisk.

[The organization and management of First Aid in the workplace: critical issues and innovations to be introduced].

PubMed

Papaleo, Bruno; Cangiano, Giovanna; Calicchia, Sara; Marcellini, Laura; Colagiacomo, Chiara; Pera, Alessandra

2012-01-01

Develop an effective First Aid's system in workplaces is significantly important to the outcomes of accidents at work, thus contributing positively to create healthy and safe environments, improving responsible attitude and risk perception by workers. The italian regulation (D. Lgs. 81/08; DM 388/03) gives an important role to First Aid within the system for managing health and safety in workplaces and requires the employers to designate and train workers and organize facilities in the workplace. However, to ensure that First Aid's system actually contributes to increasing health and safety in workplaces, it's necessary to verify its effectiveness, beyond the law compliance. The article stands to evaluate the critical issues and related innovations to be introduced in this context, by analyzing data from literature and field experiences involving actors in the prevention system. The goal is to provide suggestions and action proposals to improve first aid's system in workplaces, paying particular attention to the aiders training (selection, motivation, teaching methods, retraining), as well as introduce to innovations to allow an immediate and timely emergency response (company equipments, other useful devices). On this last aspect, it has given particular emphasis to the introduction of semi-automatic defibrillator (AED), which is essential in case of sudden cardiac arrest with ventricular fibrillation, and special aiders training by means of BLSD (Basic Life Support and Defibrillation) courses based on international guidelines.

Overcoming Language and Literacy Barriers in Safety and Health Training of Agricultural Workers

PubMed Central

Arcury, Thomas A.; Estrada, Jorge M.; Quandt, Sara A.

2010-01-01

The workforce in all areas of United States agriculture and forestry is becoming increasingly diverse in language, culture, and education. Many agricultural workers are immigrants who have limited English language skills and limited educational attainment. Providing safety and health training to this large, diverse, dispersed, and often transient population of workers is challenging. This review, prepared for the 2010 Agricultural Safety and Health Council of America/National Institute for Occupational Safety and Health conference, “Be Safe, Be Profitable: Protecting Workers in Agriculture,” is divided into five sections. First, we describe the occupational and demographic characteristics of agricultural workers in the US to highlight their safety and health training needs. Second, we summarize current research on the social and cultural attributes of agricultural workers and agricultural employers that affect the provision of safety and health training. Worker and employer attributes include language, literacy, financial limitations, work beliefs, and health beliefs. Third, we review current initiatives addressing safety and health training for agricultural workers that consider worker language and literacy. These initiatives are limited to a few specific topics (e.g., pesticides, heat stress); they do not provide general programs of safety training that would help establish a culture of workplace safety. However, several innovative approaches to health and safety training are being implemented, including the use of community-based participatory approaches and lay health promoter programs. Fourth, the limited industry response for safety training with this linguistically diverse and educationally limited workforce is summarized. Finally, gaps in knowledge and practice are summarized and recommendations to develop educationally, culturally, and linguistically appropriate safety and health training are presented. PMID:20665309

Integrating system safety into the basic systems engineering process

NASA Technical Reports Server (NTRS)

Griswold, J. W.

1971-01-01

The basic elements of a systems engineering process are given along with a detailed description of what the safety system requires from the systems engineering process. Also discussed is the safety that the system provides to other subfunctions of systems engineering.

Safety on the Job. Some Guidelines for Working Safely. Instructor's Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This teacher's guide was developed to help teachers (especially in Oklahoma) promote safe practices on the job. As a supplement to existing programs in the requirements for job safety, this book can also promote same basic safety attitudes and help support basic safety concepts, with an emphasis on accident prevention. The guide contains eight…

An Alternative Approach to Preservice Police Training: Combining Training and Education Learning Outcomes

ERIC Educational Resources Information Center

Martin, Richard H.

2014-01-01

Many states offer police and corrections officer certification through state approved police basic training, either after hire (in-service) or before hire (preservice). Only large agencies conduct their own basic training academies after being hired. The trend is to save money through preservice training offered by colleges. This especially…

Training Aids for Basic Combat Skills: A Video Feedback System

DTIC Science & Technology

2011-05-01

U.S. Army Research Institute for the Behavioral and Social Sciences Research Report 1945 Training Aids for Basic Combat...Training Aids for Basic Combat Skills: A Video Feedback System 5a. CONTRACT OR GRANT NUMBER W74V8H-04-D-0045 (DO #0034) 5b. PROGRAM ELEMENT...Subject Matter POC: Martin L. Bink 14. ABSTRACT (Maximum 200 words): The overarching goal was to develop a training aid that could be used by

DOE-EM-45 PACKAGING OPERATIONS AND MAINTENANCE COURSE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Watkins, R.; England, J.

2010-05-28

Savannah River National Laboratory - Savannah River Packaging Technology (SRNL-SRPT) delivered the inaugural offering of the Packaging Operations and Maintenance Course for DOE-EM-45's Packaging Certification Program (PCP) at the University of South Carolina Aiken on September 1 and 2, 2009. Twenty-nine students registered, attended, and completed this training. The DOE-EM-45 Packaging Certification Program (PCP) sponsored the presentation of a new training course, Packaging Maintenance and Operations, on September 1-2, 2009 at the University of South Carolina Aiken (USC-Aiken) campus in Aiken, SC. The premier offering of the course was developed and presented by the Savannah River National Laboratory, and attendedmore » by twenty-nine students across the DOE, NNSA and private industry. This training informed package users of the requirements associated with handling shipping containers at a facility (user) level and provided a basic overview of the requirements typically outlined in Safety Analysis Report for Packaging (SARP) Chapters 1, 7, and 8. The course taught packaging personnel about the regulatory nature of SARPs to help reduce associated and often costly packaging errors. Some of the topics covered were package contents, loading, unloading, storage, torque requirements, maintaining records, how to handle abnormal conditions, lessons learned, leakage testing (including demonstration), and replacement parts. The target audience for this course was facility operations personnel, facility maintenance personnel, and field quality assurance personnel who are directly involved in the handling of shipping containers. The training also aimed at writers of SARP Chapters 1, 7, and 8, package designers, and anyone else involved in radioactive material packaging and transportation safety. Student feedback and critiques of the training were very positive. SRNL will offer the course again at USC Aiken in September 2010.« less

A PC-based high temperature gas reactor simulator for Indonesian conceptual HTR reactor basic training

NASA Astrophysics Data System (ADS)

Syarip; Po, L. C. C.

2018-05-01

In planning for nuclear power plant construction in Indonesia, helium cooled high temperature reactor (HTR) is favorable for not relying upon water supply that might be interrupted by earthquake. In order to train its personnel, BATAN has cooperated with Micro-Simulation Technology of USA to develop a 200 MWt PC-based simulation model PCTRAN/HTR. It operates in Win10 environment with graphic user interface (GUI). Normal operation of startup, power maneuvering, shutdown and accidents including pipe breaks and complete loss of AC power have been conducted. A sample case of safety analysis simulation to demonstrate the inherent safety features of HTR was done for helium pipe break malfunction scenario. The analysis was done for the variation of primary coolant pipe break i.e. from 0,1% - 0,5 % and 1% - 10 % helium gas leakages, while the reactor was operated at the maximum constant power of 10 MWt. The result shows that the highest temperature of HTR fuel centerline and coolant were 1150 °C and 1296 °C respectively. With 10 kg/s of helium flow in the reactor core, the thermal power will back to the startup position after 1287 s of helium pipe break malfunction.

Breaking Down Barriers: Certificate in Workplace Basic Skills Training for Adult Basic Education Tutors & Co-Ordinators.

ERIC Educational Resources Information Center

Frank, Fiona; Holland, Chris; Jeffery, Sue; Marquand, Alison; Noel, Alison

Designed to familiarize experienced and qualified basic skills tutors and coordinators with issues of teaching basic skills in the workplace in Great Britain, this course can be delivered by experienced workplace basic skills training program coordinators. It can be delivered over three days or as six half-day sessions. Each of the four units…

30 CFR 46.3 - Training plans.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR EDUCATION AND TRAINING TRAINING AND..., National Mine Health and Safety Academy, 1301 Airport Road, Beaver, WV 25813-9426, Telephone: (304) 256... responsible for the health and safety training at the mine. This person may be the production-operator or...

Related Factors of the Influence on Mental Symptoms of the Recruits in the Basic Military Training

ERIC Educational Resources Information Center

Hong-zheng, Li; Mei-ying, Lei; Dong-hai Zhao; Li-qiong, Zhao; Geng, Liu; Hong-kui, Zhou; Mei, Qin; Jie-feng, Li; Jian, Wen; Pin-de, Huang; Yi, Li; Chuang, Wang; Zhou-ran, Wang

2012-01-01

The objective of the study is to explore the psychosocial characteristics of recruits for mental health education during the basic military training. A total of 1,366 male recruits were assessed during the basic military training. The psychosocial characteristics, such as effects of LE (life events), mental symptoms, personality trait coping style…

Development and Evaluation of a Basic First Aid Curriculum for Spanish-Speaking Dairy Workers.

PubMed

Meyerhoff, Anna; Tinc, Pamela J; Scott, Erika E

2016-07-27

. Over the past decade, the New York State dairy industry has grown substantially, resulting in an increase in immigrant workers who speak languages other than English. Estimates suggest that over 50% of workers on large New York dairies are Spanish-speaking individuals who immigrated to the U.S. from Guatemala, Mexico, and other Latin American countries. With a growing population of Spanish-speaking workers, safety concerns on farms have become a prominent issue. This article reviews the development and evaluation of a basic dairy first aid curriculum, which is intended to educate Spanish-speaking immigrant dairy workers on emergency response and first aid. The materials developed are culturally relevant and can be easily understood by low-literacy, non-English-speaking workers. In evaluation of the materials using pre- and post-testing, a significant knowledge gain was identified in workers who participated in the training. Copyright© by the American Society of Agricultural Engineers.

Choking Prevention and Rescue Tips

MedlinePlus

... Workplace Training Driver Training First Aid Training Consulting Surveys Research Safety Topics Fatigue Drugs at Work Driving Workplace ... of an Effective Safety Management System Employee Perception Surveys Research Safety Topics Fatigue Drugs at Work Driving Workplace ...

Differences in safety training among smaller and larger construction firms with non-native workers: Evidence of overlapping vulnerabilities

PubMed Central

Guerin, Rebecca J.; Keller, Brenna M.; Flynn, Michael A.; Salgado, Cathy; Hudson, Dennis

2017-01-01

Collaborative efforts between the National Institute for Occupational Safety and Health (NIOSH) and the American Society of Safety Engineers (ASSE) led to a report focusing on overlapping occupational vulnerabilities, specifically small construction businesses employing young, non-native workers. Following the report, an online survey was conducted by ASSE with construction business representatives focusing on training experiences of non-native workers. Results were grouped by business size (50 or fewer employees or more than 50 employees). Smaller businesses were less likely to employ a supervisor who speaks the same language as immigrant workers (p < .001). Non-native workers in small businesses received fewer hours of both initial safety training (p = .005) and monthly ongoing safety training (p = .042). Immigrant workers in smaller businesses were less likely to receive every type of safety training identified in the survey (including pre-work safety orientation [p < .001], job-specific training [p < .001], OSHA 10-hour training [p = .001], and federal/state required training [p < .001]). The results highlight some of the challenges a vulnerable worker population faces in a small business, and can be used to better focus intervention efforts. Among businesses represented in this sample, there are deflcits in the amount, frequency, and format of workplace safety and health training provided to non-native workers in smaller construction businesses compared to those in larger businesses. The types of training conducted for non-native workers in small business were less likely to take into account the language and literacy issues faced by these workers. The findings suggest the need for a targeted approach in providing occupational safety and health training to non-native workers employed by smaller construction businesses. PMID:29375194

77 FR 58567 - Information Collection Activities: Well Control and Production Safety Training, Submitted for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-21

...-0006; OMB Number 1014-0008] Information Collection Activities: Well Control and Production Safety... requirements in the regulations under Subpart O, ``Well Control and Production Safety Training.'' This notice... and Production Safety Training. OMB Control Number: 1014-0008. Abstract: The Outer Continental Shelf...

49 CFR 238.105 - Train electronic hardware and software safety.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Train electronic hardware and software safety. 238... and General Requirements § 238.105 Train electronic hardware and software safety. The requirements of this section apply to electronic hardware and software used to control or monitor safety functions in...

49 CFR 238.105 - Train electronic hardware and software safety.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Train electronic hardware and software safety. 238... and General Requirements § 238.105 Train electronic hardware and software safety. The requirements of this section apply to electronic hardware and software used to control or monitor safety functions in...

49 CFR 238.105 - Train electronic hardware and software safety.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Train electronic hardware and software safety. 238... and General Requirements § 238.105 Train electronic hardware and software safety. The requirements of this section apply to electronic hardware and software used to control or monitor safety functions in...

49 CFR 238.105 - Train electronic hardware and software safety.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Train electronic hardware and software safety. 238... and General Requirements § 238.105 Train electronic hardware and software safety. The requirements of this section apply to electronic hardware and software used to control or monitor safety functions in...

Safety and Health Training Resources.

ERIC Educational Resources Information Center

Federal Safety Advisory Council, Washington, DC.

Information obtained from a survey of safety and health training activities undertaken by Federal agencies is provided in the document which serves as a resource guide and directory of agency safety programs. The document, intended to help Federal managers meet their safety training needs with available government resources, is divided into four…

Patient safety training in pediatric emergency medicine: a national survey of program directors.

PubMed

Wolff, Margaret; Macias, Charles G; Garcia, Estevan; Stankovic, Curt

2014-07-01

The Accreditation Council for Graduate Medical Education requires training in patient safety and medical errors but does not provide specification for content or methods. Pediatric emergency medicine (EM) fellowship directors were surveyed to characterize current training of pediatric EM fellows in patient safety and to determine the need for additional training. From June 2013 to August 2013, pediatric EM fellowship directors were surveyed via e-mail. Of the 71 eligible survey respondents, 57 (80.3%) completed surveys. A formal curriculum was present in 24.6% of programs, with a median of 6 hours (range = 1 to 18 hours) dedicated to the curriculum. One program evaluated the efficacy of the curriculum. Nearly 91% of respondents without formal programs identified lack of local faculty expertise or interest as the primary barrier to implementing patient safety curricula. Of programs without formal curricula, 93.6% included at least one component of patient safety training in their fellowship programs. The majority of respondents would implement a standardized patient safety curriculum for pediatric EM if one was available. Despite the importance of patient safety training and requirements to train pediatric EM fellows in patient safety and medical errors, there is a lack of formal curriculum and local faculty expertise. The majority of programs have introduced components of patient safety training and desire a standardized curriculum. © 2014 by the Society for Academic Emergency Medicine.

29 CFR 1926.21 - Safety training and education.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 8 2011-07-01 2011-07-01 false Safety training and education. 1926.21 Section 1926.21... Provisions § 1926.21 Safety training and education. (a) General requirements. The Secretary shall, pursuant to section 107(f) of the Act, establish and supervise programs for the education and training of...

29 CFR 1926.21 - Safety training and education.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 8 2013-07-01 2013-07-01 false Safety training and education. 1926.21 Section 1926.21... Provisions § 1926.21 Safety training and education. (a) General requirements. The Secretary shall, pursuant to section 107(f) of the Act, establish and supervise programs for the education and training of...

29 CFR 1926.21 - Safety training and education.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 8 2014-07-01 2014-07-01 false Safety training and education. 1926.21 Section 1926.21... Provisions § 1926.21 Safety training and education. (a) General requirements. The Secretary shall, pursuant to section 107(f) of the Act, establish and supervise programs for the education and training of...

29 CFR 1926.21 - Safety training and education.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 8 2012-07-01 2012-07-01 false Safety training and education. 1926.21 Section 1926.21... Provisions § 1926.21 Safety training and education. (a) General requirements. The Secretary shall, pursuant to section 107(f) of the Act, establish and supervise programs for the education and training of...

Construction Safety Training via e-Learning: Learning Effectiveness and User Satisfaction

ERIC Educational Resources Information Center

Ho, Chun-Ling; Dzeng, Ren-Jye

2010-01-01

In Taiwan, promoting knowledge of "Labor Safety" which relates to life and work right is very important. Safety training and learning effectiveness become essential issues of adult learning. To reduce the costs of educational training, enterprises have also started to aggressively introduce e-learning education training. Unlike the…

29 CFR 1926.21 - Safety training and education.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 8 2010-07-01 2010-07-01 false Safety training and education. 1926.21 Section 1926.21... Provisions § 1926.21 Safety training and education. (a) General requirements. The Secretary shall, pursuant to section 107(f) of the Act, establish and supervise programs for the education and training of...

Participatory approach to improving safety, health and working conditions in informal economy workplaces in Cambodia.

PubMed

Kawakami, Tsuyoshi; Tong, Leng; Kannitha, Yi; Sophorn, Tun

2011-01-01

The present study aimed to improve safety and health in informal economy workplaces such as home workplaces, small construction sites, and rural farms in Cambodia by using "participatory" approach. The government, workers' and employers' organizations and NGOs jointly assisted informal economy workers in improving safety and health by using participatory training methodologies. The steps taken were: (1) to collect existing good practices in safety and health in Cambodia; (2) to develop new participatory training programmes for home workers and small construction sites referring to ILO's WISE training programme, and (3) to train government officers, workers, employers and NGOs as safety and health trainers. The participatory training programmes developed consisted of action-checklists associated with illustrations, good example photo sheets, and texts explaining practical, low-cost improvement measures. The established safety and health trainers reached many informal economy workers through their human networks, and trained them by using the developed participatory training programmes. More than 3,000 informal economy workers were trained and they implemented improvements by using low-cost methods. Participatory training methodologies and active cooperation between the government, workers, employers and NGOs made it possible to provide practical training for those involved in the informal economy workplaces.

The development and efficacy of safety training for commercial fishermen.

PubMed

Dzugan, Jerry

2010-10-01

Commercial fishing is still the most dangerous occupation in the United States. Efforts to have more stringent safety regulations in this industry beginning in the 1960s, culminated in the Commercial Fishing Vessel Safety Act of 1988. The purpose of this paper is to provide a short history of the development of safety training in the United States and the current training infrastructure. This paper will also review studies available regarding the effectiveness of safety training in reducing fatalities among fishermen. The lack of familiarity and practice with marine survival equipment such as life rafts, immersion suits, and emergency-locating beacons has been noted in National Transportation Safety Board and US Coast Guard casualty reports as a contributing factor in fatalities. These reports have demonstrated the importance of not just having survival equipment onboard, but training in how to use it effectively in an emergency. There is evidence that safety training has made a measurable impact in surviving an emergency at sea and that recent training (within 5 years) is most effective in saving lives. More recently, studies have been completed to understand how skills may diminish over time since initial training.

Examination of Supplemental Driver Training and Online Basic Driver Education

DOT National Transportation Integrated Search

2012-06-01

This report describes supplemental driver training programs and online basic driver education. It coves supplemental driver training that : focused on knowledge and skills beyond those normally found in traditional driver education delivered in the U...

Using game technologies to improve the safety of construction plant operations.

PubMed

Guo, Hongling; Li, Heng; Chan, Greg; Skitmore, Martin

2012-09-01

Many accidents occur world-wide in the use of construction plant and equipment, and safety training is considered by many to be one of the best approaches to their prevention. However, current safety training methods/tools are unable to provide trainees with the hands-on practice needed. Game technology-based safety training platforms have the potential to overcome this problem in a virtual environment. One such platform is described in this paper - its characteristics are analysed and its possible contribution to safety training identified. This is developed and tested by means of a case study involving three major pieces of construction plant, which successfully demonstrates that the platform can improve the process and performance of the safety training involved in their operation. This research not only presents a new and useful solution to the safety training of construction operations, but illustrates the potential use of advanced technologies in solving construction industry problems in general. Copyright © 2011 Elsevier Ltd. All rights reserved.

Millwright Apprenticeship. Related Training Modules. 1.1-1.8 Safety.

ERIC Educational Resources Information Center

Lane Community Coll., Eugene, OR.

This packet, part of the instructional materials for the Oregon apprenticeship program for millwright training, contains eight modules covering safety. The modules provide information on the following topics: general safety, hand tool safety, power tool safety, fire safety, hygiene, safety and electricity, types of fire and fire prevention, and…

Fundamental arthroscopic skill differentiation with virtual reality simulation.

PubMed

Rose, Kelsey; Pedowitz, Robert

2015-02-01

The purpose of this study was to investigate the use and validity of virtual reality modules as part of the educational approach to mastering arthroscopy in a safe environment by assessing the ability to distinguish between experience levels. Additionally, the study aimed to evaluate whether experts have greater ambidexterity than do novices. Three virtual reality modules (Swemac/Augmented Reality Systems, Linkoping, Sweden) were created to test fundamental arthroscopic skills. Thirty participants-10 experts consisting of faculty, 10 intermediate participants consisting of orthopaedic residents, and 10 novices consisting of medical students-performed each exercise. Steady and Telescope was designed to train centering and image stability. Steady and Probe was designed to train basic triangulation. Track and Moving Target was designed to train coordinated motions of arthroscope and probe. Metrics reflecting speed, accuracy, and efficiency of motion were used to measure construct validity. Steady and Probe and Track a Moving Target both exhibited construct validity, with better performance by experts and intermediate participants than by novices (P < .05), whereas Steady and Telescope did not show validity. There was an overall trend toward better ambidexterity as a function of greater surgical experience, with experts consistently more proficient than novices throughout all 3 modules. This study represents a new way to assess basic arthroscopy skills using virtual reality modules developed through task deconstruction. Participants with the most arthroscopic experience performed better and were more consistent than novices on all 3 virtual reality modules. Greater arthroscopic experience correlates with more symmetry of ambidextrous performance. However, further adjustment of the modules may better simulate fundamental arthroscopic skills and discriminate between experience levels. Arthroscopy training is a critical element of orthopaedic surgery resident training. Developing techniques to safely and effectively train these skills is critical for patient safety and resident education. Copyright © 2015 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

[The experience of involvement of volunteers into maintenance of infection safety during period of implementation of mass activities].

PubMed

Imamov, A A; Balabanova, L A; Zamalieva, M A

2016-01-01

The article presents experience of Rospotrebnadzor in the Republic of Tatarstan in the field of preventive medicine concerning training of volunteers on issues of infection safety with purpose of prevention of ictuses of infection diseases during mass activities with international participation in the period of XXVII World Summer Students Games. The model of hygienic training for volunteers provides two directions: training for volunteers ’ leaders on issues of infection safety and remote course for involved volunteers. During period of preparation for the Students Games-2013 hygienic training was organized for volunteers-leaders in the field of infection safety with following attestation. The modern training technologies were applied. The volunteers-leaders familiarized with groups of infection diseases including the most dangerous ones, investigated with expert algorithm of actions to be applied in case of suspicion on infection disease in gest or participant of the Games-2013 to secure one's health and health of immediate population. The active volunteers-leaders became trainers and coaches in the field of infection safety. The second stage of infection safety training organized by youth trainers' pool in number of 30 individuals the training technology "Equal trains equal" was applied for hygienic training of volunteers involved at epidemiologically significant objects (food objects, hotels, accompaniment of guests and sportsmen). The volunteers-leaders trained to infection safety 1400 volunteers. The format of electronic personal cabinet and remote course were selected as tools of post-training monitoring.

Fall prevention and safety communication training for foremen:Report of a pilot project designed to improve residential construction safety

PubMed Central

Kaskutas, Vicki; Dale, Ann Marie; Lipscomb, Hester; Evanoff, Brad

2013-01-01

Problem Falls from heights account for 64% of residential construction worker fatalities and 20% of missed work days. We hypothesized that worker safety would improve with foremen training in fall prevention and safety communication. Method Training priorities identified through foreman and apprentice focus groups and surveys were integrated into an 8-hour training. We piloted the training with ten foremen employed by a residential builder. Carpenter trainers contrasted proper methods to protect workers from falls with methods observed at the foremen’s worksites. Trainers presented methods to deliver toolbox talks and safety messages. Results from worksite observational audits (n=29) and foremen/crewmember surveys (n=97) administered before and after training were compared. Results We found that inexperienced workers are exposed to many fall hazards that they are often not prepared to negotiate. Fall protection is used inconsistently and worksite mentorship is often inadequate. Foremen feel pressured to meet productivity demands and some are unsure of the fall protection requirements. After the training, the frequency of daily mentoring and toolbox talks increased, and these talks became more interactive and focused on hazardous daily work tasks. Foremen observed their worksites for fall hazards more often. We observed increased compliance with fall protection and decreased unsafe behaviors during worksite audits. Discussion Designing the training to meet both foremen’s and crewmembers’ needs ensured the training was learner-centered and contextually-relevant. This pilot suggests that training residential foremen can increase use of fall protection, improve safety behaviors, and enhance on-the-job training and safety communication at their worksites. Impact on Industry Construction workers’ training should target safety communication and mentoring skills with workers who will lead work crews. Interventions at multiple levels are necessary to increase safety compliance in residential construction and decrease falls from heights. PMID:23398712

Fall prevention and safety communication training for foremen: report of a pilot project designed to improve residential construction safety.

PubMed

Kaskutas, Vicki; Dale, Ann Marie; Lipscomb, Hester; Evanoff, Brad

2013-02-01

Falls from heights account for 64% of residential construction worker fatalities and 20% of missed work days. We hypothesized that worker safety would improve with foremen training in fall prevention and safety communication. Training priorities identified through foreman and apprentice focus groups and surveys were integrated into an 8-hour training. We piloted the training with ten foremen employed by a residential builder. Carpenter trainers contrasted proper methods to protect workers from falls with methods observed at the foremen's worksites. Trainers presented methods to deliver toolbox talks and safety messages. Results from worksite observational audits (n=29) and foremen/crewmember surveys (n=97) administered before and after training were compared. We found that inexperienced workers are exposed to many fall hazards that they are often not prepared to negotiate. Fall protection is used inconsistently and worksite mentorship is often inadequate. Foremen feel pressured to meet productivity demands and some are unsure of the fall protection requirements. After the training, the frequency of daily mentoring and toolbox talks increased, and these talks became more interactive and focused on hazardous daily work tasks. Foremen observed their worksites for fall hazards more often. We observed increased compliance with fall protection and decreased unsafe behaviors during worksite audits. Designing the training to meet both foremen's and crewmembers' needs ensured the training was learner-centered and contextually-relevant. This pilot suggests that training residential foremen can increase use of fall protection, improve safety behaviors, and enhance on-the-job training and safety communication at their worksites. Construction workers' training should target safety communication and mentoring skills with workers who will lead work crews. Interventions at multiple levels are necessary to increase safety compliance in residential construction and decrease falls from heights. Copyright © 2013 Elsevier Ltd. All rights reserved.

What to Do When Winter Has You in its Icy Grip

MedlinePlus

... Workplace Training Driver Training First Aid Training Consulting Surveys Research Safety Topics Fatigue Drugs at Work Driving Workplace ... of an Effective Safety Management System Employee Perception Surveys Research Safety Topics Fatigue Drugs at Work Driving Workplace ...

Cycling in the African American Community : safety training guidelines and findings.

DOT National Transportation Integrated Search

2013-08-01

This report is a program users manual for the Cycling in the African American Community (CAAC) safety training intervention. The CAAC safety training intervention was designed to nudge more African Americans, who are often beginning cyclists...

[Patient safety in education and training of healthcare professionals in Germany].

PubMed

Hoffmann, Barbara; Siebert, H; Euteneier, A

2015-01-01

In order to improve patient safety, healthcare professionals who care for patients directly or indirectly are required to possess specific knowledge and skills. Patient safety education is not or only poorly represented in education and examination regulations of healthcare professionals in Germany; therefore, it is only practiced rarely and on a voluntary basis. Meanwhile, several training curricula and concepts have been developed in the past 10 years internationally and recently in Germany, too. Based on these concepts the German Coalition for Patient Safety developed a catalogue of core competencies required for safety in patient care. This catalogue will serve as an important orientation when patient safety is to be implemented as a subject of professional education in Germany in the future. Moreover, teaching staff has to be trained and educational and training activities have to be evaluated. Patient safety education and training for (undergraduate) healthcare professional will require capital investment.

ISD Designed Medical Specialist Training.

ERIC Educational Resources Information Center

Rock, Samuel K., Jr.; Chagalis, George P.

The Basic Medical Specialist course has one of the largest enrollments of the U.S. Army's Academy of Health Sciences; 11,000 soldiers were trained in this course in 1977 and 1978. Training encompasses both emergency first aid (for field medics) and basic nursing skills. A task force working to improve Army training developed this course, in…

Computer-based training for safety: comparing methods with older and younger workers.

PubMed

Wallen, Erik S; Mulloy, Karen B

2006-01-01

Computer-based safety training is becoming more common and is being delivered to an increasingly aging workforce. Aging results in a number of changes that make it more difficult to learn from certain types of computer-based training. Instructional designs derived from cognitive learning theories may overcome some of these difficulties. Three versions of computer-based respiratory safety training were shown to older and younger workers who then took a high and a low level learning test. Younger workers did better overall. Both older and younger workers did best with the version containing text with pictures and audio narration. Computer-based training with pictures and audio narration may be beneficial for workers over 45 years of age. Computer-based safety training has advantages but workers of different ages may benefit differently. Computer-based safety programs should be designed and selected based on their ability to effectively train older as well as younger learners.

[Exploration of the Association Between Workplace Bullying and Attitudes Toward Patient Safety in Female Nurses].

PubMed

Lin, Yuh-Hsuan; Hsiao, Shu-Tai Sheen; Lin, Chiou-Fen; Yang, Chyn-Yng; Chung, Min-Huey

2018-02-01

Workplace bullying is known to have a significant and detrimental effect on the physical and psychological outcomes of its victims. The reactions of victims to bullying may decrease clinical care outcomes and patient safety. To explore the relationship between workplace bullying and the attitudes of female nurses toward the safety of their patients. This cross-sectional survey study used convenience sampling. Participants included female nurses from a regional teaching hospital. The research tool was a three-part, structured questionnaire that included a basic personal information datasheet, negative behavior scale, and patient safety attitude scale. The researcher distributed 420 questionnaires and collected 329 valid samples (valid return rate: 78.3%). Data were analyzed using SPSS software version 22.0. The analysis found that 29.8% of the participants had suffered from various degrees of workplace bullying. The mean score for patient safety attitudes was 3.58 (standard deviation = 0.55). Workplace bullying and patient safety attitudes were negatively correlated (p < .1), and being a recipient of workplace bullying was identified as a significant predictor of attitudes toward patient safety. Based on the results, we suggest that supervisors should take the initiative to care for their nursing staffs and to provide them with training in conflict-oriented skills. Organization managers should set up relevant committee-notification mechanisms that construct the safe working environment necessary to reduce workplace bullying and to enhance the patient safety attitudes of nurses, which will indirectly improve the quality of patient care.

Preventing Burns in Your Home

MedlinePlus

... Plans Nutrients and Nutritional Info Sugar and Sugar Substitutes Exercise and Fitness Exercise Basics Sports Safety Injury ... Plans Nutrients and Nutritional Info Sugar and Sugar Substitutes Exercise and Fitness Exercise Basics Sports Safety Injury ...

Impact of Safety Training and Interventions on Training-Transfer: Targeting Migrant Construction Workers.

PubMed

Hussain, Rahat; Pedro, Akeem; Lee, Do Yeop; Pham, Hai Chien; Park, Chan Sik

2018-05-01

Despite substantial efforts to improve construction safety training, the accident rate of migrant workers is still high. One of the primary factors contributing to the inefficacy of training includes information delivery gaps during training sessions (knowledge-transfer). In addition, there is insufficient evidence that these training programs alone are effective enough to enable migrant workers to transfer their skills to jobsite (training-transfer). This research attempts to identify and evaluate additional interventions to improve the transfer of acquired knowledge to workplace. For this purpose, this study presents the first known experimental effort to assess the effect of interventions on migrant work groups in a multinational construction project in Qatar. Data analysis reveals that the adoption of training programs with the inclusion of interventions significantly improves training-transfer. Construction safety experts can leverage the findings of this study to enhance training-transfer by increasing worker's safety performance and hazard identification ability.

49 CFR 214.353 - Training and qualification of roadway workers who provide on-track safety for roadway work groups.

Code of Federal Regulations, 2010 CFR

2010-10-01

... RAILROAD WORKPLACE SAFETY Roadway Worker Protection § 214.353 Training and qualification of roadway workers... workers who provide for the on-track safety of groups of roadway workers through establishment of working...) All the on-track safety training and qualification required of the roadway workers to be supervised...

Public safety training as a force multiplier.

PubMed

Potter, Anthony N; Woodruff, Craig A

2012-01-01

The training of public safety officers to meet the many and varied demands of today's healthcare environment is the second step in developing and maintaining a world class public safety service. Working closely with the corporate training department, and utilizing the latest adult education techniques, the public safety director can ensure that all officers are capable of meeting the challenges threatening the safety and security of his healthcare facilities. This is the second in a series of articles on all aspects of public safety personnel administration.

Utah Department of Transportation traffic operation center operator training.

DOT National Transportation Integrated Search

2010-11-01

This paper is a summary of work performed by the Utah Traffic Lab (UTL) to develop training programs for the Utah Department of Transportation (UDOT) Traffic Operations Center (TOC) operators at both the basic and advanced levels. The basic training ...

49 CFR 214.353 - Training and qualification of roadway workers who provide on-track safety for roadway work groups.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Training and qualification of roadway workers who... RAILROAD WORKPLACE SAFETY Roadway Worker Protection § 214.353 Training and qualification of roadway workers...) All the on-track safety training and qualification required of the roadway workers to be supervised...

Laser safety in dentistry

NASA Astrophysics Data System (ADS)

Wigdor, Harvey A.

1997-05-01

One of the major causes of anxiety in the dental clinic is the dental handpiece. Because dentists wish to provide a method which can replace the drill there has often been a premature use of the laser in dentistry. Various lasers have been introduced into the clinic before research has shown the laser used is of clinical benefit. Any new treatment method must not compromise the health of the patient being treated. Thus a method of evaluating the clinical abilities of dentists and their understanding the limitations of the laser used must be developed. Dentist must be trained in the basic interaction of the laser on oral tissues. The training has to concentrate on the variation of the laser wavelength absorption in the different tissues of the oral cavity. Because of the differences in the optical properties of these tissues great care must be exercised by practitioners using lasers on patients.

Multimedia for occupational safety and health training: a pilot study examining a multimedia learning theory.

PubMed

Wallen, Erik S; Mulloy, Karen B

2006-10-01

Occupational diseases are a significant problem affecting public health. Safety training is an important method of preventing occupational illness. Training is increasingly being delivered by computer although theories of learning from computer-based multimedia have been tested almost entirely on college students. This study was designed to determine whether these theories might also be applied to safety training applications for working adults. Participants viewed either computer-based multimedia respirator use training with concurrent narration, narration prior to the animation, or unrelated safety training. Participants then took a five-item transfer test which measured their ability to use their knowledge in new and creative ways. Participants who viewed the computer-based multimedia trainings both did significantly better than the control group on the transfer test. The results of this pilot study suggest that design guidelines developed for younger learners may be effective for training workers in occupational safety and health although more investigation is needed.

Improving staff perception of a safety climate with crew resource management training.

PubMed

Kuy, SreyRam; Romero, Ramon A L

2017-06-01

Communication failure is one of the top root causes in patient safety adverse events. Crew resource management (CRM) is a team building communication process intended to improve patient safety by improving team dynamics. First, to describe implementation of CRM in a Veterans Affair (VA) surgical service. Second, to assess whether staff CRM training is related to improvement in staff perception of a safety climate. Mandatory CRM training was implemented for all surgical service staff at a VA Hospital at 0 and 12 mo. Safety climate questionnaires were completed by operating room staff at a baseline, 6 and 12 mo after the initial CRM training. Participants reported improvement on all 27 points on the safety climate questionnaire at 6 mo compared with the baseline. At 12 mo, there was sustained improvement in 23 of the 27 areas. This is the first published report about the effect of CRM training on staff perception of a safety climate in a VA surgical service. We demonstrate that CRM training can be successfully implemented widespread in a surgical program. Overall, there was improvement in 100% of areas assessed on the safety climate questionnaire at 6 mo after CRM training. By 1 y, this improvement was sustained in 23 of 27 areas, with the areas of greatest improvement being the performance of briefings, collaboration between nurses and doctors, valuing nursing input, knowledge about patient safety, and institutional promotion of a patient safety climate. Published by Elsevier Inc.

The basics of animal biosafety and biocontainment training.

PubMed

Pritt, Stacy; Hankenson, F Claire; Wagner, Ted; Tate, Mallory

2007-06-01

The threat of biocontamination in an animal facility is best subdued by training. 'Training' is an ambiguous designation that may not be adequately appreciated in all animal facilities. The authors set down concrete training topics and provide practical advice on incorporating the basic principles of facility biosafety training--as well as the precautions and procedures that employees must know in case of accident or emergency--into various training models. They also discuss the current biosafety publications and guidelines and their relationship to biosafety training.

10 CFR 34.79 - Records of training and certification.

Code of Federal Regulations, 2010 CFR

2010-01-01

... refresher safety training was conducted, and names of the instructors and attendees. For inspections of job... Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY... and receiving the oral and practical examinations; and (b) Records of annual refresher safety training...

Cynthia Szydlek | NREL

Science.gov Websites

Cynthia Szydlek Photo of Cynthia Szydlek Cynthia Szydlek NWTC Training Coordinator/Project Support increased safety expectations and comply with comprehensive training requirements. She maintains the NWTC's Environmental, Health, and Safety (EHS) training and safety management systems and ensures all critical on-site

49 CFR 236.1043 - Task analysis and basic requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Positive Train Control Systems § 236.1043 Task analysis and basic requirements. (a) Training structure and... installation, maintenance, repair, modification, inspection, testing, and operating tasks that must be...

49 CFR 236.1043 - Task analysis and basic requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Positive Train Control Systems § 236.1043 Task analysis and basic requirements. (a) Training structure and... installation, maintenance, repair, modification, inspection, testing, and operating tasks that must be...

49 CFR 236.1043 - Task analysis and basic requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Positive Train Control Systems § 236.1043 Task analysis and basic requirements. (a) Training structure and... installation, maintenance, repair, modification, inspection, testing, and operating tasks that must be...

49 CFR 236.1043 - Task analysis and basic requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Positive Train Control Systems § 236.1043 Task analysis and basic requirements. (a) Training structure and... installation, maintenance, repair, modification, inspection, testing, and operating tasks that must be...

49 CFR 236.1043 - Task analysis and basic requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Positive Train Control Systems § 236.1043 Task analysis and basic requirements. (a) Training structure and... installation, maintenance, repair, modification, inspection, testing, and operating tasks that must be...

OSHA--what is its role in dentistry and how do we provide training?

PubMed

Basquill, Linda C; Govoni, Mary; Bednarsh, Helene

2005-03-01

The mission of the Occupational Safety and Health Administration (OSHA) is to ensure the safety and health of America's workers. Although OSHA's focus is on safety, there is a natural overlap into the infection control arena. The work practice control, engineering control, and personal protective equipment regulations are examples of OSHA safety topics that have a direct impact on dental infection control. In a similar fashion, the regulations designed to protect the dental health care worker often translate into increased safety for the dental patient. To ensure their safety, OSHA requires workers to be appropriately trained. This article reviews the regulatory significance of OSHA, compares OSHA with other regulatory and advisory agencies, and discusses OSHA's training requirements. Principles for conducting training in the dental health care setting along with suggestions for assessing training also are presented.

A job safety program for construction workers designed to reduce the potential for occupational injury using tool box training sessions and computer-assisted biofeedback stress management techniques.

PubMed

Johnson, Kenneth A; Ruppe, Joan

2002-01-01

This project was conducted with a multicultural construction company in Hawaii, USA. The job duties performed included drywall and carpentry work. The following objectives were selected for this project: (a) fire prevention training and inspection of first aid equipment; (b) blood-borne pathogen training and risk evaluation; (c) ergonomic and risk evaluation intervention program; (d) electrical safety training and inspection program; (e) slips, trips, and falls safety training; (f) stress assessment and Personal Profile System; (g) safety and health program survey; (h) improving employee relations and morale by emphasizing spirituality; and (i) computer-assisted biofeedback stress management training. Results of the project indicated that observed safety hazards, reported injuries, and levels of perceived stress. were reduced for the majority of the population.

The Basic Organizing/Optimizing Training Scheduler (BOOTS): User's Guide. Technical Report 151.

ERIC Educational Resources Information Center

Church, Richard L.; Keeler, F. Laurence

This report provides the step-by-step instructions required for using the Navy's Basic Organizing/Optimizing Training Scheduler (BOOTS) system. BOOTS is a computerized tool designed to aid in the creation of master training schedules for each Navy recruit training command. The system is defined in terms of three major functions: (1) data file…

Safety and Interoperability Agreements on Bilateral Use of Artillery, Tank, and Mortar Ammunition during Training - Germany, the United Kingdom, Canada, the Netherlands, Belgium, France, and the United States

DTIC Science & Technology

1979-10-01

BRIEFIN-G OF CINCUSAREUR ON STATUS OF SUBJ. 2 NCV 77. 1. r£F A EXPLAINED BASIC CONCEPT PLAN FOR SUBJ INITIATIVE...TM 43-0001-2 8) Diameter Color Propellant: Composition — Grain Type --- Weight Web — - Primer M82 - TB 9-2300-303-10 PaUet: 165 -mm (6...perforated cylinder Weight 12. 9 kg (28. 51bs.) Web - — .109-mm (0.043 in.) Primer M82 Used with Cannon (Weapon) M2A2 (M2A1E1

Patient-led training on patient safety: a pilot study to test the feasibility and acceptability of an educational intervention.

PubMed

Jha, V; Winterbottom, A; Symons, J; Thompson, Z; Quinton, N; Corrado, O J; Melville, C; Watt, I; Torgerson, D; Wright, J

2013-09-01

Training in patient safety is an important element of medical education. Most educational interventions on patient safety training adopt a 'health-professional lens' with limited consideration on the impact of safety lapses on the patient and their families and little or no involvement of patients in the design or delivery of the training. This paper describes a pilot study to test the feasibility and acceptability of implementing a patient-led educational intervention to facilitate safety training amongst newly qualified doctors. Patients and/or carers who had experienced harm during their care shared narratives of their stories with trainees; this was followed by a focused discussion on patient safety issues exploring the causes and consequences of safety incidents and lessons to be learned from these. The intervention, which will be further tested in an NIHR-funded randomised controlled trial (RCT), was successfully implemented into an existing training programme and found acceptance amongst the patients and trainees. The pilot study proved to be a useful step in refining the intervention for the RCT including identifying appropriate outcome measures and highlighting organisational issues.

An Educational Intervention to Enhance Nurse Leaders' Perceptions of Patient Safety Culture

PubMed Central

Ginsburg, Liane; Norton, Peter G; Casebeer, Ann; Lewis, Steven

2005-01-01

Objective To design a training intervention and then test its effect on nurse leaders' perceptions of patient safety culture. Study Setting Three hundred and fifty-six nurses in clinical leadership roles (nurse managers and educators/CNSs) in two Canadian multi-site teaching hospitals (study and control). Study Design A prospective evaluation of a patient safety training intervention using a quasi-experimental untreated control group design with pretest and posttest. Nurses in clinical leadership roles in the study group were invited to participate in two patient safety workshops over a 6-month period. Individuals in the study and control groups completed surveys measuring patient safety culture and leadership for improvement prior to training and 4 months following the second workshop. Extraction Methods Individual nurse clinical leaders were the unit of analysis. Exploratory factor analysis of the safety culture items was conducted; repeated-measures analysis of variance and paired t-tests were used to evaluate the effect of the training intervention on perceived safety culture (three factors). Hierarchical regression analyses looked at the influence of demographics, leadership for improvement, and the training intervention on nurse leaders' perceptions of safety culture. Principal Findings A statistically significant improvement in one of three safety culture measures was shown for the study group (p<.001) and a significant decline was seen on one of the safety culture measures for the control group (p<.05). Leadership support for improvement was found to explain significant amounts of variance in all three patient safety culture measures; workshop attendance explained significant amounts of variance in one of the three safety culture measures. The total R2 for the three full hierarchical regression models ranged from 0.338 and 0.554. Conclusions Sensitively delivered training initiatives for nurse leaders can help to foster a safety culture. Organizational leadership support for improvement is, however, also critical for fostering a culture of safety. Together, training interventions and leadership support may have the most significant impact on patient safety culture. PMID:16033489

Efficacy of the Stranger Safety Abduction-Prevention Program and Parent-Conducted in Situ Training

ERIC Educational Resources Information Center

Miltenberger, Raymond G.; Fogel, Victoria A.; Beck, Kimberly V.; Koehler, Shannon; Shayne, Rachel; Noah, Jennifer; McFee, Krystal; Perdomo, Andrea; Chan, Paula; Simmons, Danica; Godish, Danielle

2013-01-01

Using a control group design, we evaluated the effectiveness of the "Stranger Safety" DVD (The Safe Side, 2004) and parent training of abduction-prevention skills with 6- to 8-year-old children. Children in the training or control group who did not demonstrate the safety skills received in situ training from their parents. There was no…

Train the Trainer. Facilitator Guide Sample. Basic Blueprint Reading (Chapter One).

ERIC Educational Resources Information Center

Saint Louis Community Coll., MO.

This publication consists of three sections: facilitator's guide--train the trainer, facilitator's guide sample--Basic Blueprint Reading (Chapter 1), and participant's guide sample--basic blueprint reading (chapter 1). Section I addresses why the trainer should learn new classroom techniques; lecturing versus facilitating; learning styles…

The Effects of Safety Discrimination Training and Frequent Safety Observations on Safety-Related Behavior

ERIC Educational Resources Information Center

Taylor, Matthew A.; Alvero, Alicia M.

2012-01-01

The intent of the present study was to assess the effects of discrimination training only and in combination with frequent safety observations on five participants' safety-related behavior in a simulated office setting. The study used a multiple-baseline design across safety-related behaviors. Across all participants and behavior, safety improved…

76 FR 66656 - Agricultural Career and Employment Grants Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-27

... agricultural employers and farmworkers by improving the supply, stability, safety, and training of the... employers and farmworkers by improving the supply, stability, safety, and training of the agricultural labor... Improve the Supply, Stability, Safety, and Training of Agricultural Labor Force''--the grants program...

16 CFR Figure 2 to Part 1203 - ISO Headform-Basic, Reference, and Median Planes

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false ISO Headform-Basic, Reference, and Median Planes 2 Figure 2 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR BICYCLE HELMETS Pt. 1203, Fig. 2 Figure 2 to Part 1203—ISO...

Safety analysts training

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bolton, P.

The purpose of this task was to support ESH-3 in providing Airborne Release Fraction and Respirable Fraction training to safety analysts at LANL who perform accident analysis, hazard analysis, safety analysis, and/or risk assessments at nuclear facilities. The task included preparation of materials for and the conduct of two 3-day training courses covering the following topics: safety analysis process; calculation model; aerosol physic concepts for safety analysis; and overview of empirically derived airborne release fractions and respirable fractions.

Basic Operational Robotics Instructional System

NASA Technical Reports Server (NTRS)

Todd, Brian Keith; Fischer, James; Falgout, Jane; Schweers, John

2013-01-01

The Basic Operational Robotics Instructional System (BORIS) is a six-degree-of-freedom rotational robotic manipulator system simulation used for training of fundamental robotics concepts, with in-line shoulder, offset elbow, and offset wrist. BORIS is used to provide generic robotics training to aerospace professionals including flight crews, flight controllers, and robotics instructors. It uses forward kinematic and inverse kinematic algorithms to simulate joint and end-effector motion, combined with a multibody dynamics model, moving-object contact model, and X-Windows based graphical user interfaces, coordinated in the Trick Simulation modeling environment. The motivation for development of BORIS was the need for a generic system for basic robotics training. Before BORIS, introductory robotics training was done with either the SRMS (Shuttle Remote Manipulator System) or SSRMS (Space Station Remote Manipulator System) simulations. The unique construction of each of these systems required some specialized training that distracted students from the ideas and goals of the basic robotics instruction.

Washington State's Integrated Basic Education and Skills Training Program (I-BEST): New Evidence of Effectiveness. CCRC Working Paper No. 20

ERIC Educational Resources Information Center

Zeidenberg, Matthew; Cho, Sung-Woo; Jenkins, Davis

2010-01-01

To increase the rate at which adult basic skills students advance to and succeed in college-level occupational programs, the Washington State Board for Community and Technical Colleges (SBCTC) developed the Integrated Basic Education and Skills Training, or I-BEST. In the I-BEST model, a basic skills instructor and an occupational instructor team…

Basic Science Training Program.

ERIC Educational Resources Information Center

Brummel, Clete

These six learning modules were developed for Lake Michigan College's Basic Science Training Program, a workshop to develop good study skills while reviewing basic science. The first module, which was designed to provide students with the necessary skills to study efficiently, covers the following topics: time management; an overview of a study…

A case for safety leadership team training of hospital managers.

PubMed

Singer, Sara J; Hayes, Jennifer; Cooper, Jeffrey B; Vogt, Jay W; Sales, Michael; Aristidou, Angela; Gray, Garry C; Kiang, Mathew V; Meyer, Gregg S

2011-01-01

Delivering safe patient care remains an elusive goal. Resolving problems in complex organizations like hospitals requires managers to work together. Safety leadership training that encourages managers to exercise learning-oriented, team-based leadership behaviors could promote systemic problem solving and enhance patient safety. Despite the need for such training, few programs teach multidisciplinary groups of managers about specific behaviors that can enhance their role as leadership teams in the realm of patient safety. The aims of this study were to describe a learning-oriented, team-based, safety leadership training program composed of reinforcing exercises and to provide evidence confirming the need for such training and demonstrating behavior change among management groups after training. Twelve groups of managers from an academic medical center based in the Northeast United States were randomly selected to participate in the program and exposed to its customized, experience-based, integrated, multimodal curriculum. We extracted data from transcripts of four training sessions over 15 months with groups of managers about the need for the training in these groups and change in participants' awareness, professional behaviors, and group activity. Training transcripts confirmed the need for safety leadership team training and provided evidence of the potential for training to increase targeted behaviors. The training increased awareness and use of leadership behaviors among many managers and led to new routines and coordinated effort among most management groups. Enhanced learning-oriented leadership often helped promote a learning orientation in managers' work areas. Team-based training that promotes specific learning-oriented leader behaviors can promote behavioral change among multidisciplinary groups of hospital managers.

Training Children in Pedestrian Safety: Distinguishing Gains in Knowledge from Gains in Safe Behavior

PubMed Central

McClure, Leslie A.

2014-01-01

Pedestrian injuries contribute greatly to child morbidity and mortality. Recent evidence suggests that training within virtual pedestrian environments may improve children’s street crossing skills, but may not convey knowledge about safety in street environments. We hypothesized that (a) children will gain pedestrian safety knowledge via videos/software/internet websites, but not when trained by virtual pedestrian environment or other strategies; (b) pedestrian safety knowledge will be associated with safe pedestrian behavior both before and after training; and (c) increases in knowledge will be associated with increases in safe behavior among children trained individually at streetside locations, but not those trained by means of other strategies. We analyzed data from a randomized controlled trial evaluating pedestrian safety training. We randomly assigned 240 children ages 7–8 to one of four training conditions: videos/software/internet, virtual reality (VR), individualized streetside instruction, or a no-contact control. Both virtual and field simulations of street crossing at 2-lane bi-directional mid-block locations assessed pedestrian behavior at baseline, post-training, and 6-month follow-up. Pedestrian knowledge was assessed orally on all three occasions. Children trained by videos/software/internet, and those trained individually, showed increased knowledge following training relative to children in the other groups (ps < 0.01). Correlations between pedestrian safety knowledge and pedestrian behavior were mostly non-significant. Correlations between change in knowledge and change in behavior from pre- to post-intervention also were non-significant, both for the full sample and within conditions. Children trained using videos/software/internet gained knowledge but did not change their behavior. Children trained individually gained in both knowledge and safer behavior. Children trained virtually gained in safer behavior but not knowledge. If VR is used for training, tools like videos/internet might effectively supplement training. We discovered few associations between knowledge and behavior, and none between changes in knowledge and behavior. Pedestrian safety knowledge and safe pedestrian behavior may be orthogonal constructs that should be considered independently for research and training purposes. PMID:24573688

Restaurant supervisor safety training: evaluating a small business training intervention.

PubMed

Bush, Diane; Paleo, Lyn; Baker, Robin; Dewey, Robin; Toktogonova, Nurgul; Cornelio, Deogracia

2009-01-01

We developed and assessed a program designed to help small business owners/managers conduct short training sessions with their employees, involve employees in identifying and addressing workplace hazards, and make workplace changes (including physical and work practice changes) to improve workplace safety. During 2006, in partnership with a major workers' compensation insurance carrier and a restaurant trade association, university-based trainers conducted workshops for more than 200 restaurant and food service owners/managers. Workshop participants completed posttests to assess their knowledge, attitudes, and intentions to implement health and safety changes. On-site follow-up interviews with 10 participants were conducted three to six months after the training to assess the extent to which program components were used and worksite changes were made. Post-training assessments demonstrated that attendees increased their understanding and commitment to health and safety, and felt prepared to provide health and safety training to their employees. Follow-up interviews indicated that participants incorporated core program concepts into their training and supervision practices. Participants conducted training, discussed workplace hazards and solutions with employees, and made changes in the workplace and work practices to improve workers' health and safety. This program demonstrated that owners of small businesses can adopt a philosophy of employee involvement in their health and safety programs if provided with simple, easy-to-use materials and a training demonstration. Attending a workshop where they can interact with other owners/ managers of small restaurants was also a key to the program's success.

Performance of First-Tour WAC Enlisted Women: Data Base for the Performance Orientation of Women's Basic Training. Final Report.

ERIC Educational Resources Information Center

Boyd, H. Alton; And Others

The introduction of performance-oriented instructional procedures into Women's Basic Training (BT) at Fort McClellan and the revision of Army Training Program 21-121 to incorporate the philosophy and principles of performance-oriented training are described in the document. Results from a questionnaire regarding duties, activities, and attitudes…

Training Requirements in OSHA Standards and Training Guidelines.

ERIC Educational Resources Information Center

Occupational Safety and Health Administration, Washington, DC.

This booklet contains Occupational Safety and Health Administration (OSHA) training requirements, excerpted from OSHA standards. The booklet is designed to help employers, safety and health professionals, training directors, and others who need to know training requirements. (Requirements for posting information, warning signs, labels, and the…

Relative effectiveness of worker safety and health training methods.

PubMed

Burke, Michael J; Sarpy, Sue Ann; Smith-Crowe, Kristin; Chan-Serafin, Suzanne; Salvador, Rommel O; Islam, Gazi

2006-02-01

We sought to determine the relative effectiveness of different methods of worker safety and health training aimed at improving safety knowledge and performance and reducing negative outcomes (accidents, illnesses, and injuries). Ninety-five quasi-experimental studies (n=20991) were included in the analysis. Three types of intervention methods were distinguished on the basis of learners' participation in the training process: least engaging (lecture, pamphlets, videos), moderately engaging (programmed instruction, feedback interventions), and most engaging (training in behavioral modeling, hands-on training). As training methods became more engaging (i.e., requiring trainees' active participation), workers demonstrated greater knowledge acquisition, and reductions were seen in accidents, illnesses, and injuries. All methods of training produced meaningful behavioral performance improvements. Training involving behavioral modeling, a substantial amount of practice, and dialogue is generally more effective than other methods of safety and health training. The present findings challenge the current emphasis on more passive computer-based and distance training methods within the public health workforce.

Relative Effectiveness of Worker Safety and Health Training Methods

PubMed Central

Burke, Michael J.; Sarpy, Sue Ann; Smith-Crowe, Kristin; Chan-Serafin, Suzanne; Salvador, Rommel O.; Islam, Gazi

2006-01-01

Objectives. We sought to determine the relative effectiveness of different methods of worker safety and health training aimed at improving safety knowledge and performance and reducing negative outcomes (accidents, illnesses, and injuries). Methods. Ninety-five quasi-experimental studies (n=20991) were included in the analysis. Three types of intervention methods were distinguished on the basis of learners’ participation in the training process: least engaging (lecture, pamphlets, videos), moderately engaging (programmed instruction, feedback interventions), and most engaging (training in behavioral modeling, hands-on training). Results. As training methods became more engaging (i.e., requiring trainees’ active participation), workers demonstrated greater knowledge acquisition, and reductions were seen in accidents, illnesses, and injuries. All methods of training produced meaningful behavioral performance improvements. Conclusions. Training involving behavioral modeling, a substantial amount of practice, and dialogue is generally more effective than other methods of safety and health training. The present findings challenge the current emphasis on more passive computer-based and distance training methods within the public health workforce. PMID:16380566

Endotracheal tube placement by EMT-Basics in a rural EMS system.

PubMed

Pratt, Jeffrey C; Hirshberg, Alan J

2005-01-01

To evaluate the effectiveness of an intubation-training module and special-waiver project in which Emergency Medical Technician (EMT)-Basics were trained to perform endotracheal intubations in a rural community. This was a prospective observational study over a four-year period (July 1998 through May 2002) of all intubation attempts by EMT-Basics in the field. The authors observed intubation data, training methods, and quality-assurance methods of a special-waiver project agreed to by the State Department of Public Health to train and allow EMT-Basics to intubate patients. Data were from documentation unique to the project. Project documentation evaluated the placement and complication(s) of endotracheal tube (ETT) placement after arrival to the emergency department. An intubation attempt was defined as direct laryngoscopy. A successful attempt was defined as an appropriately sized ETT placed and secured in the trachea below the vocal cords and above the carina. Confirmation of placement in the field included accepted clinical methods and the use of qualitative colorimetric end-tidal carbon dioxide detectors. The EMT-Basics were trained using a paramedic curriculum, including operating room intubations on live adult patients. All patients were in either cardiopulmonary or respiratory arrest. Thirty-two intubations were performed by EMT-Basics. Thirty attempts were successful and two were unsuccessful (94%; 95% confidence interval [CI] 80-98%). Unsuccessful ETT placements were managed with accepted basic life support airway standards. There were no unrecognized esophageal ETT placements (0%; 95% CI 0-11%). This study demonstrated that with an intensive training program using selected highly motivated providers and close monitoring, a program of EMT-Basic ETT placement in a rural setting can achieve acceptable success rates in patients in cardiac or respiratory arrest.

Development and validation of a new assessment tool for suturing skills in medical students.

PubMed

Sundhagen, Henriette Pisani; Almeland, Stian Kreken; Hansson, Emma

2018-01-01

In recent years, emphasis has been put on that medical student should demonstrate pre-practice/pre-registration core procedural skills to ensure patient safety. Nonetheless, the formal teaching and training of basic suturing skills to medical students have received relatively little attention and there is no standard for what should be tested and how. The aim of this study was to develop and validate, using scientific methods, a tool for assessment of medical students' suturing skills, measuring both micro- and macrosurgical qualities. A tool was constructed and content, construct, concurrent validity, and inter-rater, inter-item, inter-test reliability were tested. Three groups were included: students with no training in suturing skills, students who have had training, plastic surgery. The results show promising reliability and validity when assessing novice medical students' suturing skills. Further studies are needed on implementation of the instrument. Moreover, how the instrument can be used to give formative feedback, evaluate if a required standard is met and for curriculum development needs further investigation.Level of Evidence: Not ratable.

General Employee Training Live, Course 15503

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gabel, Daniel Glen; Hughes, Heather

This training at Los Alamos National Laboratory contains the following sections: Introduction to the Laboratory, Institutional Quality Assurance, Facilities, Policies, Procedures, and Other Requirements, Safety Expectations, Worker Protection: Occupational Safety and Health, Industrial Hygiene and Safety, Lockout/Tagout, General Employee Radiological Training, Fire Protection, Security, Emergency Operations, Occupational Health, and Environment.

40 CFR 170.130 - Pesticide safety training for workers.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Pesticide safety training for workers. 170.130 Section 170.130 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS WORKER PROTECTION STANDARD Standard for Workers § 170.130 Pesticide safety training for workers. (a) General requirement—(1)...

40 CFR 170.130 - Pesticide safety training for workers.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Pesticide safety training for workers. 170.130 Section 170.130 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS WORKER PROTECTION STANDARD Standard for Workers § 170.130 Pesticide safety training for workers. (a) General requirement—(1)...

75 FR 54223 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-03

... requirements of 49 CFR Part 232--Brake System Safety Standards for Freight and Other Non-Passenger Trains and Equipment; End-of Train Devices, CFR Part 229--Railroad Locomotive Safety Standards, and CFR Part 215--Railroad Freight Car Safety Standards. Specifically, UP seeks relief to permit trains received at the U.S...

Virtual reality simulation for construction safety promotion.

PubMed

Zhao, Dong; Lucas, Jason

2015-01-01

Safety is a critical issue for the construction industry. Literature argues that human error contributes to more than half of occupational incidents and could be directly impacted by effective training programs. This paper reviews the current safety training status in the US construction industry. Results from the review evidence the gap between the status and industry expectation on safety. To narrow this gap, this paper demonstrates the development and utilisation of a training program that is based on virtual reality (VR) simulation. The VR-based safety training program can offer a safe working environment where users can effectively rehearse tasks with electrical hazards and ultimately promote their abilities for electrical hazard cognition and intervention. Its visualisation and simulation can also remove the training barriers caused by electricity's features of invisibility and dangerousness.

[Strategic patient safety action plan for the anesthesiology and intensive care service of Ukraine: basic modules and their components].

PubMed

Федосюк, Роман Н

In recent years, the problem of patient safety has become top-priority in further improvement of national healthcare systems in all developed countries. To develop a modular structure and a component composition of the strategic patient safety action plan for the anesthesiology and intensive care service of Ukraine as a part of the National Action Plan. Major domestic priorities, substantiated and made public by the author in previous works, are taken as the basis for the modular structuring of the action plan. Existing foreign prototypes, evaluated for the patient safety effectiveness and the potential for the adaptation to domestic conditions, as well as author's own innovations are offered for a component filling-up of each module. Eight modules - infectious safety, surgical safety, pharmaceutical safety, infrastructural safety, incident monitoring and reporting, education and training, research and awards - have been proposed. Individual components for each of the modules are selected from a variety of foreign prototypes and author's own developments. Inter-modular stratification of the components into short-term perspective tools and long-term perspective tools, depending on the amount of resources needed for their implementation, is carried out. The strategic patient safety action plan for the anesthesiology and intensive care service of Ukraine is the embodiment, within a particular specialty, of the wider National Action Plan developed by the First National Congress on Patient Safety (Kiev, 2012) on the initiative of the Council of Europe and aimed at the fulfillment of international obligations of Ukraine in the healthcare sector. Its implementation will contribute to enhancing the safety of anesthesia and intensive care services in Ukraine and further development of the specialty.

An Operational Safety and Health Program.

ERIC Educational Resources Information Center

Uhorchak, Robert E.

1983-01-01

Describes safety/health program activities at Research Triangle Institute (North Carolina). These include: radioisotope/radiation and hazardous chemical/carcinogen use, training, monitoring, disposal; chemical waste management; air monitoring and analysis; medical program; fire safety/training, including emergency planning; Occupational Safety and…

Contextualized Literacy in Green Jobs Training

ERIC Educational Resources Information Center

Waugh, Alexandra

2013-01-01

Millions of adult Americans lack the basic literacy skills necessary to perform everyday tasks requiring basic reading and math. This stifles our economy, given that employers are increasingly likely to require education or training beyond high school. Organizations that provide job training to lower-skilled adults through Jobs for the Future's…

Basic Concepts and Conservation Skill Training in Kindergarten Chilren.

ERIC Educational Resources Information Center

Wasik, Barbara H.; And Others

1980-01-01

The study investigated the effects of basic concepts training on conservation acquisition in 41 kindergarten children (17 White boys, 15 White girls, 6 Black girls, and 5 Black boys). Only the conservation training program resulted in significant effects, and that was for the White students alone. (Author)

Examining validity evidence for a simulation-based assessment tool for basic robotic surgical skills.

PubMed

Havemann, Maria Cecilie; Dalsgaard, Torur; Sørensen, Jette Led; Røssaak, Kristin; Brisling, Steffen; Mosgaard, Berit Jul; Høgdall, Claus; Bjerrum, Flemming

2018-05-14

Increasing focus on patient safety makes it important to ensure surgical competency among surgeons before operating on patients. The objective was to gather validity evidence for a virtual-reality simulator test for robotic surgical skills and evaluate its potential as a training tool. Surgeons with varying experience in robotic surgery were recruited: novices (zero procedures), intermediates (1-50), experienced (> 50). Five experienced surgeons rated five exercises on the da Vinci Skills Simulator. Participants were tested using the five exercises. Participants were invited back 3 times and completed a total of 10 attempts per exercise. The outcome was the average simulator performance score for the 5 exercises. 32 participants from 5 surgical specialties were included. 38 participants completed all 4 sessions. A moderate correlation between the average total score and robotic experience was identified for the first attempt (Spearman r = 0.58; p = 0.0004). A difference in average total score was observed between novices and intermediates [median score 61% (IQR 52-66) vs. 83% (IQR 75-91), adjusted p < 0.0001], as well as novices and experienced [median score 61% (IQR 52-66) vs. 80 (IQR 69-85), adjusted p = 0.002]. All three groups improved their performance between the 1st and 10th attempts (p < 0.00). This study describes validity evidence for a virtual-reality simulator for basic robotic surgical skills, which can be used for assessment of basic competency and as a training tool. However, more validity evidence is needed before it can be used for certification or high-stakes assessment.

Foodservice employees benefit from interventions targeting barriers to food safety.

PubMed

York, Valerie K; Brannon, Laura A; Shanklin, Carol W; Roberts, Kevin R; Howells, Amber D; Barrett, Elizabeth B

2009-09-01

The number of foodborne illnesses traced to improper food handling in restaurants indicates a need for research to improve food safety in these establishments. Therefore, this 2-year longitudinal study investigated the effectiveness of traditional ServSafe (National Restaurant Association Educational Foundation, Chicago, IL) food-safety training and a Theory of Planned Behavior intervention program targeting employees' perceived barriers and attitudes toward important food-safety behaviors. The effectiveness of the training and intervention was measured by knowledge scores and observed behavioral compliance rates related to food-safety practices. Employees were observed for handwashing, thermometer usage, and proper handling of work surfaces at baseline, after receiving ServSafe training, and again after exposure to the intervention targeting barriers and negative attitudes about food-safety practices. Repeated-measures analyses of variance indicated training improved handwashing knowledge, but the intervention was necessary to improve overall behavioral compliance and handwashing compliance. Results suggest that registered dietitians; dietetic technicians, registered; and foodservice managers should implement a combination of training and intervention to improve knowledge and compliance with food-safety behaviors, rather than relying on training alone. Challenges encountered while conducting this research are discussed, and recommendations are provided for researchers interested in conducting this type of research in the future.

New Directions in the Army's Basic Skills Education Program (BSEP).

ERIC Educational Resources Information Center

Pilgrim, Mark T.

The Army has given to the Training and Doctrine Command the task of developing four Basic Skills Education Program (BSEP) curricula to provide functional, job-related basic skills training. These would be Military Occupational Specialty (MOS) Baseline Skills, English-as-a-Second Language (ESL), Military Life Coping Skills, and Learning Strategies.…

20 CFR 638.502 - Job Corps basic education program.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 3 2012-04-01 2012-04-01 false Job Corps basic education program. 638.502 Section 638.502 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR JOB CORPS PROGRAM UNDER TITLE IV-B OF THE JOB TRAINING PARTNERSHIP ACT Center Operations § 638.502 Job Corps basic...

Industrial Safety Training for Soviet Workers.

ERIC Educational Resources Information Center

Semenov, A.

1978-01-01

Various forms of worker training in industrial safety in the Soviet Union are described by a Soviet labor inspector, with special "industrial safety rooms" the principal means of inplant instruction. Safety education in vocational schools and "people's universities" is also touched on. (MF)

A Universal Model for Evaluating Basic Electronic Courses in Terms of Field Utilization of Training.

ERIC Educational Resources Information Center

Air Force Occupational Measurement Center, Lackland AFB, TX.

The main purpose of the Air Force project was to develop a universal model to evaluate usage of basic electronic principles training. The criterion used by the model to evaluate electronic theory training is a determination of the usefulness of the training vis-a-vis the performance of assigned tasks in the various electronic career fields. Data…

Research on the Countermeasures Based on TTPM Theory for the Improvement of the Basic Education Teachers Training Performance

ERIC Educational Resources Information Center

Huabai, Bu; Dengyu, Zhang; Xiuying, Shen; Hao, Tu

2012-01-01

Many elements of the basic education teachers' training performance are embedded in the training interaction and sharing, so the enhancement of the training performance needs a whole process management and control. Based on TTPM theory, this paper has put forward four measures that must be pay attention to during the management of the basic…

A Program to Train Apprentices to Lead Inservice Workshops for Secondary Teachers of Basic Skills. Developer/Demonstration Project. Final Report.

ERIC Educational Resources Information Center

Stallings, Jane A.

The Development and Demonstration project has trained interns to lead Effective Use of Time inservice workshops for secondary school teachers of basic reading and mathematical skills. These interns then returned to their home bases and trained teachers who could in turn train other teachers to use the Stallings Effective Use of Time methods. The…

Training Aids for Basic Combat Skills: A Procedure for Training-Aid Development

DTIC Science & Technology

2011-02-01

aids is a constant in training and education. Researchers in fields as varied as disability education, business, firefighting, vocal performance...the aids should (a) address tasks with which many Soldiers have difficulty mastering, (b) address tasks that are critical to basic combat training...candidates because of other practical considerations such as low cost, potential impact to critical IET tasks, etc

Increase in counselling communication skills after basic and advanced microskills training.

PubMed

Kuntze, Jeroen; van der Molen, Henk T; Born, Marise P

2009-03-01

Mastering counselling communication skills is one of the requirements that lead to the diploma of a registered European psychologist. The microcounseling method proves to be effective in training these skills. Research into the effectiveness of the microcounseling method often reports overall effect sizes only. The aim of this study was to investigate the adequate use of separate counselling communication skills (seven basic skills: minimal encouragements; asking questions; paraphrasing; reflection of feeling; concreteness; summarizing; and situation clarification and five advanced skills: advanced accurate empathy; confrontation; positive relabelling; examples of one's own; and directness) after respectively a basic and an advanced training in these skills. Participants were 583 first year or second year bachelor students in psychology who took the counselling communication skills progress test (CSPT). The participants are divided in a group of freshmen, who had not received any training in counselling communication skills; first year students, who had received a training in basic skills; second year students who had followed a training in advanced skills and a control group. A between-subject design, a within-subject design and a pre-test-post-test-control group design were used to examine the scores on these skills. Seven basic skills and four advanced skills had large effect sizes. One advanced skill had a moderate effect size. The microcounseling method is very effective on the level of separate microskills. However, students perform better on the basic skills than on the advanced skills. More training seems to be needed in the latter to achieve the same level of mastery.

Communication training for centre-based carers of children with severe or profound disabilities in the Western Cape, South Africa.

PubMed

Geiger, Martha

2012-01-01

The purpose of this paper is to provide a preliminary, qualitative review of an approach to training centre-based carers in supporting basic communication development and providing communication opportunities for the children with severe and profound disabilities in their care. In South Africa, these children are often the most neglected in terms of planning and providing appropriate interventions. For those with severe communication disabilities, an additional lack is in the area of the basic human right to meaningful interactions and communication. Sustainable strategies to provide opportunities for basic communication development of these children are urgently sought. Several effective international and local parent training programmes have been developed, but the urgent need remains to train centre-based carers who are taking care of groups of diversely disabled children in severely under-resourced settings . Non-profit organisations (NPOs) have been exploring practical centre-based approaches to skills sharing in physical rehabilitation, activities for daily living, feeding and support for basic communication development. As a freelance speech therapist contracted by four NPOs to implement hands-on training in basic communication for centre-based carers of non-verbal children, the author describes a training approach that evolved over three years, in collaboration with the carers and centre managements. Implications for training (for speech therapists and for community-based rehabilitation workers) and for further research are identified.

Educating Immigrant Hispanic Foodservice Workers about Food Safety Using Visual-Based Training

ERIC Educational Resources Information Center

Rajagopal, Lakshman

2013-01-01

Providing food safety training to a diverse workforce brings with it opportunities and challenges that must be addressed. The study reported here provides evidence for benefits of using visual-based tools for food safety training when educating immigrant, Hispanic foodservice workers with no or minimal English language skills. Using visual tools…

Effects of driver attention on rail crossing safety and : The effects of auditory warnings and driver distraction on rail crossing safety.

DOT National Transportation Integrated Search

2016-05-05

Train-vehicle/train collisions at highway-rail grade crossings (crossings) continue to be a major issue in the US and around the world. Although the United States has made great strides in improving safety at crossings since the 1970s, vehicle-train ...

Assessment of Native Languages for Food Safety Training Programs for Meat Industry Employees

ERIC Educational Resources Information Center

Olsen, Sherrlyn S.; Cordray, Joseph C.; Sapp, Stephen; Sebranek, Joseph G.; Anderson, Barbara; Wenger, Matt

2012-01-01

Challenges arise when teaching food safety to culturally diverse employees working in meatpacking and food manufacturing industries. A food safety training program was developed in English, translated into Spanish, and administered to 1,265 adult learners. Assessments were conducted by comparing scores before and immediately following training.…

Interactive BIM-Enabled Safety Training Piloted in Construction Education

ERIC Educational Resources Information Center

Clevenger, Caroline; Lopez del Puerto, Carla; Glick, Scott

2015-01-01

This paper documents and assesses the development of a construction safety training module featuring interactive, BIM-enabled, 3D visualizations to test if such a tool can enhance safety training related to scaffolds. This research documents the technical challenges and the lessons learned through the development and administration of a prototype…

Medical students' situational motivation to participate in simulation based team training is predicted by attitudes to patient safety.

PubMed

Escher, Cecilia; Creutzfeldt, Johan; Meurling, Lisbet; Hedman, Leif; Kjellin, Ann; Felländer-Tsai, Li

2017-02-10

Patient safety education, as well as the safety climate at clinical rotations, has an impact on students' attitudes. We explored medical students' self-reported motivation to participate in simulation-based teamwork training (SBTT), with the hypothesis that high scores in patient safety attitudes would promote motivation to SBTT and that intrinsic motivation would increase after training. In a prospective cohort study we explored Swedish medical students' attitudes to patient safety, their motivation to participate in SBTT and how motivation was affected by the training. The setting was an integrated SBTT course during the surgical semester that focused on non-technical skills and safe treatment of surgical emergencies. Data was collected using the Situational Motivation Scale (SIMS) and the Attitudes to Patient Safety Questionnaire (APSQ). We found a positive correlation between students' individual patient safety attitudes and self-reported motivation (identified regulation) to participate in SBTT. We also found that intrinsic motivation increased after training. Female students in our study scored higher than males regarding some of the APSQ sub-scores and the entire group scored higher or on par with comparable international samples. In order to enable safe practice and professionalism in healthcare, students' engagement in patient safety education is important. Our finding that students' patient safety attitudes show a positive correlation to motivation and that intrinsic motivation increases after training underpins patient safety climate and integrated teaching of patient safety issues at medical schools in order to help students develop the knowledge, skills and attitudes required for safe practice.

Effects of Different Types of Cognitive Training on Cognitive Function, Brain Structure, and Driving Safety in Senior Daily Drivers: A Pilot Study.

PubMed

Nozawa, Takayuki; Taki, Yasuyuki; Kanno, Akitake; Akimoto, Yoritaka; Ihara, Mizuki; Yokoyama, Ryoichi; Kotozaki, Yuka; Nouchi, Rui; Sekiguchi, Atsushi; Takeuchi, Hikaru; Miyauchi, Carlos Makoto; Ogawa, Takeshi; Goto, Takakuni; Sunda, Takashi; Shimizu, Toshiyuki; Tozuka, Eiji; Hirose, Satoru; Nanbu, Tatsuyoshi; Kawashima, Ryuta

2015-01-01

Increasing proportion of the elderly in the driving population raises the importance of assuring their safety. We explored the effects of three different types of cognitive training on the cognitive function, brain structure, and driving safety of the elderly. Thirty-seven healthy elderly daily drivers were randomly assigned to one of three training groups: Group V trained in a vehicle with a newly developed onboard cognitive training program, Group P trained with a similar program but on a personal computer, and Group C trained to solve a crossword puzzle. Before and after the 8-week training period, they underwent neuropsychological tests, structural brain magnetic resonance imaging, and driving safety tests. For cognitive function, only Group V showed significant improvements in processing speed and working memory. For driving safety, Group V showed significant improvements both in the driving aptitude test and in the on-road evaluations. Group P showed no significant improvements in either test, and Group C showed significant improvements in the driving aptitude but not in the on-road evaluations. The results support the effectiveness of the onboard training program in enhancing the elderly's abilities to drive safely and the potential advantages of a multimodal training approach.

Effects of Different Types of Cognitive Training on Cognitive Function, Brain Structure, and Driving Safety in Senior Daily Drivers: A Pilot Study

PubMed Central

Taki, Yasuyuki; Kanno, Akitake; Akimoto, Yoritaka; Ihara, Mizuki; Yokoyama, Ryoichi; Kotozaki, Yuka; Sekiguchi, Atsushi; Takeuchi, Hikaru; Miyauchi, Carlos Makoto; Ogawa, Takeshi; Goto, Takakuni; Sunda, Takashi; Shimizu, Toshiyuki; Tozuka, Eiji; Hirose, Satoru; Nanbu, Tatsuyoshi; Kawashima, Ryuta

2015-01-01

Background. Increasing proportion of the elderly in the driving population raises the importance of assuring their safety. We explored the effects of three different types of cognitive training on the cognitive function, brain structure, and driving safety of the elderly. Methods. Thirty-seven healthy elderly daily drivers were randomly assigned to one of three training groups: Group V trained in a vehicle with a newly developed onboard cognitive training program, Group P trained with a similar program but on a personal computer, and Group C trained to solve a crossword puzzle. Before and after the 8-week training period, they underwent neuropsychological tests, structural brain magnetic resonance imaging, and driving safety tests. Results. For cognitive function, only Group V showed significant improvements in processing speed and working memory. For driving safety, Group V showed significant improvements both in the driving aptitude test and in the on-road evaluations. Group P showed no significant improvements in either test, and Group C showed significant improvements in the driving aptitude but not in the on-road evaluations. Conclusion. The results support the effectiveness of the onboard training program in enhancing the elderly's abilities to drive safely and the potential advantages of a multimodal training approach. PMID:26161000

Peers versus professional training of basic life support in Syria: a randomized controlled trial.

PubMed

Abbas, Fatima; Sawaf, Bisher; Hanafi, Ibrahem; Hajeer, Mohammad Younis; Zakaria, Mhd Ismael; Abbas, Wafaa; Alabdeh, Fadi; Ibrahim, Nazir

2018-06-18

Peer training has been identified as a useful tool for delivering undergraduate training in basic life support (BLS) which is fundamental as an initial response in cases of emergency. This study aimed to (1) Evaluate the efficacy of peer-led model in basic life support training among medical students in their first three years of study, compared to professional-led training and (2) To assess the efficacy of the course program and students' satisfaction of peer-led training. A randomized controlled trial with blinded assessors was conducted on 72 medical students from the pre-clinical years (1st to 3rd years in Syria) at Syrian Private University. Students were randomly assigned to peer-led or to professional-led training group for one-day-course of basic life support skills. Sixty-four students who underwent checklist based assessment using objective structured clinical examination design (OSCE) (practical assessment of BLS skills) and answered BLS knowledge checkpoint-questionnaire were included in the analysis. There was no statistically significant difference between the two groups in delivering BLS skills to medical students in practical (P = 0.850) and BLS knowledge questionnaire outcomes (P = 0.900). Both groups showed statistically significant improvement from pre- to post-course assessment with significant statistical difference in both practical skills and theoretical knowledge (P-Value < 0.001). Students were satisfied with the peer model of training. Peer-led training of basic life support for medical students was beneficial and it provided a quality of education which was as effective as training conducted by professionals. This method is applicable and desirable especially in poor-resource countries and in crisis situation.

Label Review Training: Module 1: Label Basics, Page 21

EPA Pesticide Factsheets

This module of the pesticide label review training provides basic information about pesticides, their labeling and regulation, and the core principles of pesticide label review. Learn about types of labels.

33 CFR 150.602 - What occupational awareness training is required?

Code of Federal Regulations, 2011 CFR

2011-07-01

... safety and health, the implementation of an approved, port-specific safety and environmental management... HOMELAND SECURITY (CONTINUED) DEEPWATER PORTS DEEPWATER PORTS: OPERATIONS Workplace Safety and Health Safety and Health (general) § 150.602 What occupational awareness training is required? (a) Each...

An investigation of safety climate in OHSAS 18001-certified and non-certified organizations.

PubMed

Ghahramani, Abolfazl

2016-09-01

Many organizations worldwide have implemented Occupational Health and Safety Assessment Series (OHSAS) 18001 in their premises because of the assumed positive effects of this standard on safety. Few studies have analyzed the effect of the safety climate in OHSAS 18001-certified organizations. This case-control study used a new safety climate questionnaire to evaluate three OHSAS 18001-certified and three non-certified manufacturing companies in Iran. Hierarchical regression indicated that the safety climate was influenced by OHSAS implementation and by safety training. Employees who received safety training had better perceptions of the safety climate and its dimensions than other respondents within the certified companies. This study found that the implementation of OHSAS 18001 does not guarantee improvement of the safety climate. This study also emphasizes the need for high-quality safety training for employees of the certified companies to improve the safety climate.

The Committee Studying Contagious Disease Training for Public Safety Personnel. Report of the Committee on Training of the Criminal Justice Services Board to the Governor and the General Assembly of Virginia. House Document No. 15.

ERIC Educational Resources Information Center

Virginia State Dept. of Criminal Justice Services, Richmond.

Through discussion and extensive research, the Committee Studying Contagious Disease Training attempted to address concerns regarding education and training of public safety personnel with regard to human immunodeficiency virus (HIV) and hepatitis B virus (HBV). The committee's findings were based on Occupational Safety and Health Administration…

A Human Dissection Training Program at Indiana University School of Medicine-Northwest

ERIC Educational Resources Information Center

Talarico, Ernest F., Jr.

2010-01-01

As human cadavers are widely used in basic sciences, medical education, and other training and research venues, there is a real need for experts trained in anatomy and dissection. This article describes a program that gives individuals interested in clinical and basic sciences practical experience working with cadavers. Participants are selected…

An Analysis and Plan of Test Development for the Law Enforcement Basic Training Course.

ERIC Educational Resources Information Center

Vineberg, Robert; Taylor, John E.

A test development plan is described to evaluate police enrolled in the law enforcement basic training course developed by California's Commission on Peace Officer Standards and Training (POST). Some general test methodologies are discussed: performance tests, knowledge tests, and situational tests, including role playing simulations and…

Standard First Aid Training Course. Naval Education and Training Command Rate Training Manual.

ERIC Educational Resources Information Center

Naval Education and Training Command, Washington, DC.

This first aid manual is designed to serve as basic first aid instructional materials for all nonmedical naval personnel. Chapters are included on the following topics: basic life support, hemorrhage, shock, wounds, injuries, drug abuse, poisoning, common medical emergencies, NBC (nuclear, biological, chemical) agent casualties, and rescue and…

Direct Loan Update, 2002-2003. EDExpress Training. Participant Guide.

ERIC Educational Resources Information Center

Office of Student Financial Assistance (ED), Washington, DC.

This participant guide is an update to basic training in the Direct Loan (DL) portion of the EDExpress system designed for financial aid professionals who have already participated in the basic training. The first session considers new aspects of DL processing, focusing on DL process changes and EDExpress DL changes. Session 2 contains three…

Label Review Training: Module 1: Label Basics, Page 20

EPA Pesticide Factsheets

This module of the pesticide label review training provides basic information about pesticides, their labeling and regulation, and the core principles of pesticide label review. This section focuses on supplemental labeling.

Label Review Training: Module 1: Label Basics, Page 22

EPA Pesticide Factsheets

This module of the pesticide label review training provides basic information about pesticides, their labeling and regulation, and the core principles of pesticide label review. Learn about what labels require review.

Label Review Training: Module 1: Label Basics, Page 18

EPA Pesticide Factsheets

This module of the pesticide label review training provides basic information about pesticides, their labeling and regulation, and the core principles of pesticide label review. This section discusses the types of labels.

Label Review Training: Module 1: Label Basics, Page 26

EPA Pesticide Factsheets

This module of the pesticide label review training provides basic information about pesticides, their labeling and regulation, and the core principles of pesticide label review. Learn about mandatory and advisory label statements.

Label Review Training: Module 1: Label Basics, Page 19

EPA Pesticide Factsheets

This module of the pesticide label review training provides basic information about pesticides, their labeling and regulation, and the core principles of pesticide label review. This section covers supplemental distributor labeling.

Label Review Training: Module 1: Label Basics, Page 15

EPA Pesticide Factsheets

This module of the pesticide label review training provides basic information about pesticides, their labeling and regulation, and the core principles of pesticide label review. Learn about the consequences of improper labeling.

Label Review Training: Module 1: Label Basics, Page 14

EPA Pesticide Factsheets

This module of the pesticide label review training provides basic information about pesticides, their labeling and regulation, and the core principles of pesticide label review. Learn about positive effects from proper labeling.

Dairy Tool Box Talks: A Comprehensive Worker Training in Dairy Farming.

PubMed

Rovai, Maristela; Carroll, Heidi; Foos, Rebecca; Erickson, Tracey; Garcia, Alvaro

2016-01-01

Today's dairies are growing rapidly, with increasing dependence on Latino immigrant workers. This requires new educational strategies for improving milk quality and introduction to state-of-the-art dairy farming practices. It also creates knowledge gaps pertaining to the health of animals and workers, mainly due to the lack of time and language barriers. Owners, managers, and herdsmen assign training duties to more experienced employees, which may not promote "best practices" and may perpetuate bad habits. A comprehensive and periodic training program administered by qualified personnel is currently needed and will enhance the sustainability of the dairy industry. Strategic management and employee satisfaction will be achieved through proper training in the employee's language, typically Spanish. The training needs to address not only current industry standards but also social and cultural differences. An innovative training course was developed following the same structure used by the engineering and construction industries, giving farm workers basic understanding of animal care and handling, cow comfort, and personal safety. The "Dairy Tool Box Talks" program was conducted over a 10-week period with nine sessions according to farm's various employee work shifts. Bulk milk bacterial counts and somatic cell counts were used to evaluate milk quality on the three dairy farms participating in the program. "Dairy Tool Box Talks" resulted in a general sense of employee satisfaction, significant learning outcomes, and enthusiasm about the topics covered. We conclude this article by highlighting the importance of educational programs aimed at improving overall cross-cultural training.

A Model Train-The-Trainer Program for HACCP-Based Food Safety Training in the Retail/Food Service Industry: An Evaluation.

ERIC Educational Resources Information Center

Martin, Kenneth E.; Knabel, Steve; Mendenhall, Von

1999-01-01

A survey showed states are adopting higher training and certification requirements for food-service workers. A train-the-trainer model was developed to prepare extension agents, health officers, and food-service managers to train others in food-safety procedures. (SK)

Adult Basic Education: The State of the Art.

ERIC Educational Resources Information Center

Griffith, William S., Ed.; Hayes, Ann P., Ed.

The central purpose of this book is to review the present state of the art in adult basic education teacher training. Each of the chapters of the book was developed specifically for the Workshop to Increase and to Improve University Teacher Training Programs in Adult Basic Education, which was held at The University of Chicago in March 1969. The…

Police Traffic Services Basic Training Program. Student Study Guide. Volume 3 of 3.

ERIC Educational Resources Information Center

Hale, Allen; Hamilton, John W.

As part of the basic training program in police traffic services intended to establish a national standard, the student study guide was developed to serve as a basic reference text to reinforce and supplement the subject material presented in class. The document consists of the six following major sections: (1) background for policy traffic…

Basic Training: A 1-Day Education Module for New Clientele in the Turf Industry

ERIC Educational Resources Information Center

Patton, Aaron J.; Reicher, Zachary J.

2011-01-01

It is important that Extension education programs be directed at clientele new to the turfgrass industry. A 1-day Basic Training: Turf Management seminar was created in 2006 to provide education to those new to the turfgrass industry. The seminar covered the basics of turfgrass management including growth, physiology, fertilization, cultural…

The current state of basic medical education in Israel: implications for a new medical school.

PubMed

Reis, Shmuel; Borkan, Jeffrey M; Weingarten, Michael

2009-11-01

The recent government decision to establish a new medical school, the fifth in Israel, is an opportune moment to reflect on the state of Basic Medical Education (BME) in the country and globally. It provides a rare opportunity for planning an educational agenda tailored to local needs. This article moves from a description of the context of Israeli health care and the medical education system to a short overview of two existing Israeli medical schools where reforms have recently taken place. This is followed by an assessment of Israeli BME and an effort to use the insights from this assessment to inform the fifth medical school blueprint. The fifth medical school presents an opportunity for further curricular reforms and educational innovations. Reforms and innovations include: fostering self-directed professional development methods; emphasis on teaching in the community; use of appropriate educational technology; an emphasis on patient safety and simulation training; promoting the humanities in medicine; and finally the accountability to the community that the graduates will serve.

Future directions in the use of dental implants.

PubMed

Bloem, T J

1989-10-01

Future development in implant prosthodontics should be based on the fundamentals of sound research and reliable clinical implementation. The goals should be to research the safety and efficacy of implants with regard to materials, host receptor site and interfacial zone; to develop acceptable uniform standards of evaluation; and to submit findings to scientific methods of analysis in determining benefit-to-risk factors. This presentation will offer a glimpse at some current developments in basic and clinical research focusing on studies in biocompatability and host acceptance; the implant-tissue interface; processes in osteogenesis related to vascularization of host sites; and bioengineering studies related to stress analysis and dimensional accuracy of impression systems for implants. The presentation will further describe future direction in research, training and implementation of services through development of an interdisciplinary team. A center is proposed to address the need for combined efforts in clinical and basic science research, the broad scope of implant utilization, and the teaching of implant procedures within an academic setting and to our colleagues.

Laser surgery: using the carbon dioxide laser.

PubMed Central

Wright, V. C.

1982-01-01

In 1917 Einstein theorized tha through an atomic process a unique kind of electromagnetic radiation could be produced by stimulated emission. When such radiation is in the optical or infrared spectrum it is termed laser (light amplification by stimulated emission of radiation) light. A laser, a high-intensity light source, emits a nearly parallel electromagnetic beam of energy at a given wavelength that can be captured by a lens and concentrated in the focal spot. The wavelength determines how the laser will be used. The carbon dioxide laser is now successfully employed for some surgical procedures in gynecology, otorhinolaryngology, neurosurgery, and plastic and general surgery. The CO2 laser beam is directed through the viewing system of an operating microscope or through a hand-held laser component. Its basic action in tissue is thermal vaporization; it causes minimal damage to adjacent tissues. Surgeons require special training in the basic methods and techniques of laser surgery, as well as in the safety standards that must be observed. Images FIG. 5 PMID:7074503

Occupational Safety. Hygiene Safety. Pre-Apprenticeship Phase 1 Training.

ERIC Educational Resources Information Center

Lane Community Coll., Eugene, OR.

This self-paced student training module on hygiene safety is one of a number of modules developed for Pre-apprenticeship Phase 1 Training. Purpose of the module is to familiarize students with the different types of airborne contaminants--including noise--which may be health hazards and with the proper hygienic measures for dealing with them. The…

Occupational Safety. Hand Tools. Pre-Apprenticeship Phase 1 Training.

ERIC Educational Resources Information Center

Lane Community Coll., Eugene, OR.

This self-paced student training module on safety when using hand tools is one of a number of modules developed for Pre-apprenticeship Phase 1 Training. Purpose of the module is to teach students the correct safety techniques for operating common hand- and arm-powered tools, including selection, maintenance, technique, and uses. The module may…

Design of a Fatigue Detection System for High-Speed Trains Based on Driver Vigilance Using a Wireless Wearable EEG.

PubMed

Zhang, Xiaoliang; Li, Jiali; Liu, Yugang; Zhang, Zutao; Wang, Zhuojun; Luo, Dianyuan; Zhou, Xiang; Zhu, Miankuan; Salman, Waleed; Hu, Guangdi; Wang, Chunbai

2017-03-01

The vigilance of the driver is important for railway safety, despite not being included in the safety management system (SMS) for high-speed train safety. In this paper, a novel fatigue detection system for high-speed train safety based on monitoring train driver vigilance using a wireless wearable electroencephalograph (EEG) is presented. This system is designed to detect whether the driver is drowsiness. The proposed system consists of three main parts: (1) a wireless wearable EEG collection; (2) train driver vigilance detection; and (3) early warning device for train driver. In the first part, an 8-channel wireless wearable brain-computer interface (BCI) device acquires the locomotive driver's brain EEG signal comfortably under high-speed train-driving conditions. The recorded data are transmitted to a personal computer (PC) via Bluetooth. In the second step, a support vector machine (SVM) classification algorithm is implemented to determine the vigilance level using the Fast Fourier transform (FFT) to extract the EEG power spectrum density (PSD). In addition, an early warning device begins to work if fatigue is detected. The simulation and test results demonstrate the feasibility of the proposed fatigue detection system for high-speed train safety.

Resilience training with soldiers during basic combat training: randomisation by platoon.

PubMed

Adler, Amy B; Williams, Jason; McGurk, Dennis; Moss, Andrew; Bliese, Paul D

2015-03-01

Resilience Training has the potential to mitigate mental health symptoms when provided during initial military training. The present study examined the impact of Resilience Training on US soldier well-being and attitudes during Basic Combat Training. Platoons were randomly assigned to Resilience Training or Military History provided during the first few days of Basic Combat Training. Surveys were conducted at baseline, post-intervention, and 3, 6, and 9 weeks. The sample resulted in a total of 1,939 soldiers who completed at least the baseline and one follow-up survey. There were no significant differences between conditions in terms of depression symptoms, anxiety symptoms, or sleep problems. However, while anxiety decreased in both conditions, the rate of decrease was faster in the Resilience Training condition. In contrast, Resilience Training had a slower rate of increase in group cohesion over time than the Military History condition. In addition, Resilience Training was associated with greater confidence in helping others and received more positive ratings than Military History. Findings demonstrate that the brief Resilience Training studied here may have some utility in supporting mental health and peer support but may not benefit unit climate. © 2014 The International Association of Applied Psychology.

Protecting the Public: How Much Training Is Enough?

ERIC Educational Resources Information Center

Feuer, Dale

1985-01-01

Discusses job training and safety training in the nuclear power and chemical manufacturing industries. Examines the toxic gas leak at Bhopal (India), the Three Mile Island incident, training requirements, government regulation versus self-regulation, and the concern for the public's safety and health. (CT)

Frequency of inadequate chicken cross-contamination prevention and cooking practices in restaurants.

PubMed

Green Brown, Laura; Khargonekar, Shivangi; Bushnell, Lisa

2013-12-01

This study was conducted by the Environmental Health Specialists Network (EHS-Net) of the Centers for Disease Control and Prevention. The purpose was to examine restaurant chicken preparation and cooking practices and kitchen managers' food safety knowledge concerning chicken. EHS-Net members interviewed managers about chicken preparation practices in 448 restaurants. The study revealed that many restaurants were not following U.S. Food and Drug Administration Food Code guidance concerning cross-contamination prevention and proper cooking and that managers lacked basic food safety knowledge about chicken. Forty percent of managers said that they never, rarely, or only sometimes designated certain cutting boards for raw meat (including chicken). One-third of managers said that they did not wash and rinse surfaces before sanitizing them. Over half of managers said that thermometers were not used to determine the final cook temperature of chicken. Only 43% of managers knew the temperature to which raw chicken needed to be cooked for it to be safe to eat. These findings indicate that restaurant chicken preparation and cooking practices and manager food safety knowledge need improvement. Findings from this study could be used by food safety programs and the restaurant industry to target training and intervention efforts to improve chicken preparation and cooking practices and knowledge concerning safe chicken preparation.

Frequency of Inadequate Chicken Cross-Contamination Prevention and Cooking Practices in Restaurants

PubMed Central

Brown, Laura Green; Khargonekar, Shivangi; Bushnell, Lisa

2017-01-01

This study was conducted by the Environmental Health Specialists Network (EHS-Net) of the Centers for Disease Control and Prevention. The purpose was to examine restaurant chicken preparation and cooking practices and kitchen managers’ food safety knowledge concerning chicken. EHS-Net members interviewed managers about chicken preparation practices in 448 restaurants. The study revealed that many restaurants were not following U.S. Food and Drug Administration Food Code guidance concerning cross-contamination prevention and proper cooking and that managers lacked basic food safety knowledge about chicken. Forty percent of managers said that they never, rarely, or only sometimes designated certain cutting boards for raw meat (including chicken). One-third of managers said that they did not wash and rinse surfaces before sanitizing them. Over half of managers said that thermometers were not used to determine the final cook temperature of chicken. Only 43% of managers knew the temperature to which raw chicken needed to be cooked for it to be safe to eat. These findings indicate that restaurant chicken preparation and cooking practices and manager food safety knowledge need improvement. Findings from this study could be used by food safety programs and the restaurant industry to target training and intervention efforts to improve chicken preparation and cooking practices and knowledge concerning safe chicken preparation. PMID:24290693

Safety for the Elementary Grades: A Multimedia Roundup.

ERIC Educational Resources Information Center

Mandell, Phyllis Levy; Rosenthal, Shiri

1980-01-01

Presents abstracts of films and cassettes for the elementary school dealing with basic safety, bicycle safety, electrical safety, emergencies and how to deal with them, fire and holiday safety, playground safety, poisons, school and bus safety, signs and signals, skateboard and water safety. (CS)

Defining the patient safety attitudes and influencing factors of health professionals working at maternity hospitals.

PubMed

Tunçer Ünver, Gamze; Harmanci Seren, Arzu Kader

2018-02-27

To determine patient safety attitudes of midwives, nurses and physicians and to examine the difference or correlation in patient safety attitudes of midwives, nurses and physicians working in maternity hospitals. It has been suggested that it is necessary to define the factors affecting patient safety attitudes of health professionals working in maternity hospitals. A descriptive and correlational design was employed.The sample comprised 58 midwives, 134 nurses and 63 physicians (255) in two maternity hospitals in Istanbul, Turkey. The data were collected using an 'information form' and a 'Patient Safety Attitude Questionnaire'. The safety attitudes of participants were generally found to be negative. However, midwives had more positive patient safety attitudes and the age, unit, adequacy of patient safety training and the importance of patient safety were the most effective variables. As health professionals working in maternity hospitals generally have negative patient safety attitudes and because patient safety training provided better attitudes among the participants, these training programmes should be developed and implemented considering the differences among age groups and units. Health professionals have different views on the patient safety culture; therefore, training needs to involve everyone to create a shared vision for patient safety. © 2018 John Wiley & Sons Ltd.

Basic Abdominal Point-of-Care Ultrasound Training in the Undergraduate: Students as Mentors.

PubMed

Garcia-Casasola, Gonzalo; Sánchez, Francisco Javier García; Luordo, Davide; Zapata, Deborah Forrester; Frías, María Carnevali; Garrido, Victoria Villena; Martínez, Javier Villanueva; de la Sotilla, Alberto Forero; Rojo, José Manuel Casas; Macho, Juan Torres

2016-11-01

To analyze the ability of medical students to be integrated in the teaching of basic abdominal ultrasound using a peer-mentoring design. Thirty medical students previously trained in basic abdominal ultrasound (mentors) had to teach all fourth-year students (n = 136) from a single academic year the same training they had received. There were 3 stages to the ultrasound teaching: theoretical (online course); basic training (3 practical sessions in which students were guaranteed to have had a minimum of 15 hours of practical experience with ultrasound and performed at least 20 basic abdominal ultrasound studies); and evaluation (objective structured clinical examination in which students had to obtain the basic abdominal views and to identify 17 structures). The mean grade ± SD obtained was 8.71 ± 1.53 of a possible 10 points. Only 2 students (1.56%) obtained a grade lower than 5, and 14 students (10.86%) obtained a grade lower than 7. A total of 33 students (25.5%) achieved the maximum grade. The structures most easily identified were the liver, the right kidney, and the urinary bladder, with 97.7% of correct answers. Students obtained the poorest results when trying to identify the left and right cardiac cavities (subxiphoid view), with only 53.5% and 55.8% of correct answers, respectively. Teaching based on peer mentoring achieved an adequate level of training in basic abdominal ultrasound. The students acquired these skills in a relatively short training period. These results suggest that peer mentoring can facilitate the large-scale implementation of ultrasound teaching in undergraduate students. © 2016 by the American Institute of Ultrasound in Medicine.

20 CFR 638.803 - Safety.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 3 2011-04-01 2011-04-01 false Safety. 638.803 Section 638.803 Employees... THE JOB TRAINING PARTNERSHIP ACT Administrative Provisions § 638.803 Safety. (a) The Job Corps... shall be assigned to such jobs or training in accordance with appropriate health and safety practices...

Hispanic Outreach: Delivering the Safety and Health Message.

ERIC Educational Resources Information Center

Delaney, Kathryn

2002-01-01

After a sharp increase in fatal accidents among Hispanic construction workers in Dallas, the Occupational Safety and Health Administration (OSHA) began aggressive outreach to the Mexican American community. Efforts included training bilingual safety trainers, offering workers' safety training in Spanish, and developing Spanish-language materials.…

Label Review Training: Module 1: Label Basics, Page 24

EPA Pesticide Factsheets

This module of the pesticide label review training provides basic information about pesticides, their labeling and regulation, and the core principles of pesticide label review. This page is about which labels require review.

Label Review Training: Module 1: Label Basics, Page 17

EPA Pesticide Factsheets

This module of the pesticide label review training provides basic information about pesticides, their labeling and regulation, and the core principles of pesticide label review. See an overview of the importance of labels.

Label Review Training: Module 1: Label Basics, Page 25

EPA Pesticide Factsheets

This module of the pesticide label review training provides basic information about pesticides, their labeling and regulation, and the core principles of pesticide label review: clarity, accuracy, consistency with EPA policy, and enforceability.

Label Review Training: Module 1: Label Basics, Page 29

EPA Pesticide Factsheets

This module of the pesticide label review training provides basic information about pesticides, their labeling and regulation, and the core principles of pesticide label review. This page is a quiz on Module 1.

Label Review Training: Module 1: Label Basics, Page 27

EPA Pesticide Factsheets

This module of the pesticide label review training provides basic information about pesticides, their labeling and regulation, and the core principles of pesticide label review. See examples of mandatory and advisory label statements.

Label Review Training: Module 1: Label Basics, Page 23

EPA Pesticide Factsheets

This module of the pesticide label review training provides basic information about pesticides, their labeling and regulation, and the core principles of pesticide label review. Lists types of labels that do not require review.

Improving the culture of safety on a high-acuity inpatient child/adolescent psychiatric unit by mindfulness-based stress reduction training of staff.

PubMed

Hallman, Ilze S; O'Connor, Nancy; Hasenau, Susan; Brady, Stephanie

2014-11-01

The purpose of this study was to reduce perceived levels of interprofessional staff stress and to improve patient and staff safety by implementing a brief mindfulness-based stress reduction (MBSR) training program on a high-acuity psychiatric inpatient unit. A one-group repeated measure design was utilized to measure the impact of the (MBSR) training program on staff stress and safety immediately post-training and at 2 months. Two instruments were utilized in the study: the Toronto Mindfulness Scale and the Perceived Stress Scale. The MBSR program reduced staff stress across the 2-month post-training period and increased staff mindfulness immediately following the brief training period of 8 days, and across the 2-month post-training period. A trend toward positive impact on patient and staff safety was also seen in a decreased number of staff call-ins, decreased need for 1:1 staffing episodes, and decreased restraint use 2 months following the training period. A brief MBSR training program offered to an interprofessional staff of a high-acuity inpatient adolescent psychiatric unit was effective in decreasing their stress, increasing their mindfulness, and improving staff and patient safety. © 2014 Wiley Periodicals, Inc.

Oregon Indigenous Farmworkers: Results of Promotor Intervention on Pesticide Knowledge and Organophosphate Metabolite Levels

PubMed Central

McCauley, Linda; Runkle, Jennifer D.; Samples, Julie; Williams, Bryan; Muniz, Juan F; Semple, Marie; Shadbeh, Nargess

2013-01-01

Objectives Examine changes in health beliefs, pesticide safety knowledge, and biomarkers of pesticide exposure in indigenous farmworker who received enhanced pesticide safety training compared to those receiving the standard training. Methods Farmworkers in Oregon were randomly assigned to either a promotores pesticide safety training program or a standard video-based training. Spot urine samples were analyzed for dialkylphosphate (DAP) urinary metabolites. Pre/post intervention questionnaires were used to measure pesticide safety knowledge, health beliefs and work practices. Results Baseline to follow-up improvements in total pesticide knowledge scores were higher in the promotor group compared to the video. Pairwise differences in mean concentrations of DAP metabolite levels showed declines from baseline to follow-up for both intervention groups. Conclusions Results showed reductions in pesticide exposure in indigenous-language speaking farmworkers who receive enhanced pesticide safety training. PMID:24064776

HEALTH AND SAFETY ORGANIZING: OCAW’S WORKER-TO-WORKER HEALTH AND SAFETY TRAINING PROGRAM*

PubMed Central

SLATIN, CRAIG

2018-01-01

In 1987, the Oil, Chemical, and Atomic Workers International Union (OCAW) was funded as one of the original eleven awardees of the Superfund Worker Training Program of the National Institute of Environmental Health Sciences. The OCAW, with the Labor Institute, developed a hazardous waste worker and hazardous materials emergency responder health and safety training program that was specific to its members in the represented industries. A social history is developed to explore a union-led, worker health education intervention. The program sought to develop worker-trainers who would conduct the training, using the Small-Group Activity Method, participate in curriculum development, and ultimately use health and safety training as a vehicle for identifying, developing, and mobilizing health and safety activists among the membership. Although the direction for this effort came from progressive leadership, it arose from the political economy of labor/management relations within specific industrial sectors. PMID:17208754

[Innovative training for enhancing patient safety. Safety culture and integrated concepts].

PubMed

Rall, M; Schaedle, B; Zieger, J; Naef, W; Weinlich, M

2002-11-01

Patient safety is determined by the performance safety of the medical team. Errors in medicine are amongst the leading causes of death of hospitalized patients. These numbers call for action. Backgrounds, methods and new forms of training are introduced in this article. Concepts from safety research are transformed to the field of emergency medical treatment. Strategies from realistic patient simulator training sessions and innovative training concepts are discussed. The reasons for the high numbers of errors in medicine are not due to a lack of medical knowledge, but due to human factors and organisational circumstances. A first step towards an improved patient safety is to accept this. We always need to be prepared that errors will occur. A next step would be to separate "error" from guilt (culture of blame) allowing for a real analysis of accidents and establishment of meaningful incident reporting systems. Concepts with a good success record from aviation like "crew resource management" (CRM) training have been adapted my medicine and are ready to use. These concepts require theoretical education as well as practical training. Innovative team training sessions using realistic patient simulator systems with video taping (for self reflexion) and interactive debriefing following the sessions are very promising. As the need to reduce error rates in medicine is very high and the reasons, methods and training concepts are known, we are urged to implement these new training concepts widely and consequently. To err is human - not to counteract it is not.

Changes in Naval Aviation Basic Instrument Flight Training: An Analysis.

DTIC Science & Technology

1985-12-01

position to the desired attitude in relation to the horizon [Refs. 4,5: pp.2,16-3]. C. BASIC INSTRUMENT FLIGHT TRAINING The objective of basic...were related to the treatment lecture: 1. Basic Air Work (BAW) 2. Partial Panel 3. Unusual Attitudes (full panel) 4. Initial Climb to Altitude (ICA) 5...of student aviators was compared. The modifi- cations consisted of a lecture concentrating on the fundamentals of attitude instrument flight. One group

Crossing the barrier between the laboratory working model and the practicable production model

NASA Astrophysics Data System (ADS)

Curby, William A.

1992-12-01

Transforming apparatus that has developed into a successfully working laboratory system into a system that is ready, or nearly ready for production, distribution and general use is not always accomplished in a cost effective or timely fashion. Several design elements must be considered interactively during the planning, construction, use and servicing of the final production form of the system. The basic design elements are: Operating Specifications, Reliability Factors, Safety Factors, Precision Limits, Accuracy Limits, Uniformity Factors, Cost Limits and Calibration Requirements. Secondary elements including: Human Engineering, Documentation, Training, Maintenance, Proprietary Rights, Protection, Marketing, Replacement of Parts, and Packing and Shipping must also be considered during the transition.

EC Project 'GUIDELINES ON MPE': proposed qualification and curriculum frameworks and the MPE in nuclear medicine

NASA Astrophysics Data System (ADS)

Caruana, C. J.

2011-09-01

The objectives of EC project 'Guidelines on Medical Physics Expert' are to provide for improved implementation of the provisions relating to the Medical Physics Expert within Council Directive 97/43/EURATOM and the proposed recast Basic Safety Standards directive. This includes harmonisation of the mission statement for Medical Physics Services as well as the education and training of the MPE. It also includes detailed knowledge-skills-competence inventories for the Medical Physics Expert in each of Diagnostic and Interventional Radiology, Nuclear Medicine and Radiotherapy. This paper presents the proposed Qualification and Curriculum Frameworks and their application to the Medical Physics Expert in Nuclear Medicine.

Initial laparoscopic basic skills training shortens the learning curve of laparoscopic suturing and is cost-effective.

PubMed

Stefanidis, Dimitrios; Hope, William W; Korndorffer, James R; Markley, Sarah; Scott, Daniel J

2010-04-01

Laparoscopic suturing is an advanced skill that is difficult to acquire. Simulator-based skills curricula have been developed that have been shown to transfer to the operating room. Currently available skills curricula need to be optimized. We hypothesized that mastering basic laparoscopic skills first would shorten the learning curve of a more complex laparoscopic task and reduce resource requirements for the Fundamentals of Laparoscopic Surgery suturing curriculum. Medical students (n = 20) with no previous simulator experience were enrolled in an IRB-approved protocol, pretested on the Fundamentals of Laparoscopic Surgery suturing model, and randomized into 2 groups. Group I (n = 10) trained (unsupervised) until proficiency levels were achieved on 5 basic tasks; Group II (n = 10) received no basic training. Both groups then trained (supervised) on the Fundamentals of Laparoscopic Surgery suturing model until previously reported proficiency levels were achieved. Two weeks later, they were retested to evaluate their retention scores, training parameters, instruction requirements, and cost between groups using t-test. Baseline characteristics and performance were similar for both groups, and 9 of 10 subjects in each group achieved the proficiency levels. The initial performance on the simulator was better for Group I after basic skills training, and their suturing learning curve was shorter compared with Group II. In addition, Group I required less active instruction. Overall time required to finish the curriculum was similar for both groups; but the Group I training strategy cost less, with a savings of $148 per trainee. Teaching novices basic laparoscopic skills before a more complex laparoscopic task produces substantial cost savings. Additional studies are needed to assess the impact of such integrated curricula on ultimate educational benefit. Copyright (c) 2010 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

A structural equation modelling approach examining the pathways between safety climate, behaviour performance and workplace slipping

PubMed Central

Swedler, David I; Verma, Santosh K; Huang, Yueng-Hsiang; Lombardi, David A; Chang, Wen-Ruey; Brennan, Melayne; Courtney, Theodore K

2015-01-01

Objective Safety climate has previously been associated with increasing safe workplace behaviours and decreasing occupational injuries. This study seeks to understand the structural relationship between employees’ perceptions of safety climate, performing a safety behaviour (ie, wearing slip-resistant shoes) and risk of slipping in the setting of limited-service restaurants. Methods At baseline, we surveyed 349 employees at 30 restaurants for their perceptions of their safety training and management commitment to safety as well as demographic data. Safety performance was identified as wearing slip-resistant shoes, as measured by direct observation by the study team. We then prospectively collected participants’ hours worked and number of slips weekly for the next 12 weeks. Using a confirmatory factor analysis, we modelled safety climate as a higher order factor composed of previously identified training and management commitment factors. Results The 349 study participants experienced 1075 slips during the 12-week follow-up. Confirmatory factor analysis supported modelling safety climate as a higher order factor composed of safety training and management commitment. In a structural equation model, safety climate indirectly affected prospective risk of slipping through safety performance, but no direct relationship between safety climate and slips was evident. Conclusions Results suggest that safety climate can reduce workplace slips through performance of a safety behaviour as well as suggesting a potential causal mechanism through which safety climate can reduce workplace injuries. Safety climate can be modelled as a higher order factor composed of safety training and management commitment. PMID:25710968

Basic Navigator Battery: An Experimental Selection Composite for Undergraduate Navigator Training.

ERIC Educational Resources Information Center

Shanahan, Frank M.; Kantor, Jeffrey E.

High rates of attrition among students in Undergraduate Navigator Training (UNT) is a major concern for Air Training Command. The main objective of this research was to evaluate the Basic Navigator Battery (BNB), a multi-test experimental selection instrument, for its potential to increase the validity of the Air Force Officer Qualifying Test…

Advice to Mental Health Intervention for Recruits Based on an Investigation for Mental Status of Servicemen during Basic Military Training

ERIC Educational Resources Information Center

Hong-zheng, Li; Dan-min, Miao; Mei-ying, Lei; Xiao-yan, Chen; Xiao-bing, Liu

2007-01-01

Basic military training consists of highly regimented training in the context of fairly extreme psychosocial stressors, and some recruits suffered from rigorous disturbance in mind. Even if practical measures which include instructive psychological intervention have been taken to ameliorate the disturbance, some questions still have not been…

Study on Innovation of Teacher Training Model in Basic Education from the Perspective of "Blended Learning"

ERIC Educational Resources Information Center

Bu, Huabai; Bu, Shizhen

2012-01-01

Gradual integration of synergetic technology, P2P technology and online learning community furnishes a new research field for innovation of teacher training model in a knowledge economy era. This article proposes the innovative model of "whole of three lines" in teacher training in basic education from the perspective of "blended…

Format of Basic Instruction Program Resistance Training Classes: Effect on Fitness Change in College Students

ERIC Educational Resources Information Center

Barfield, J. P.; Channell, Brian; Pugh, Chip; Tuck, Matt; Pendel, Dustin

2012-01-01

New resistance training programs such as CrossFit are gaining favor among college-aged students. CrossFit and related commercial resistance training programs may provide a valuable elective option within basic instruction program (BIP) curricula, but the fitness benefits of this course have not been compared with those of existing BIP resistance…

The Incredible Years Basic Parent Training for Portuguese Preschoolers with AD/HD Behaviors: Does It Make a Difference?

ERIC Educational Resources Information Center

Azevedo, Andreia Fernandes; Seabra-Santos, Maria João; Gaspar, Maria Filomena; Homem, Tatiana Carvalho

2013-01-01

Background: Evidence-based psychosocial interventions such as parent training programs are strongly recommended as first-line treatment for preschool-age children with or at-risk of attention deficit/hyperactivity disorder (AD/HD). Objective: Evaluate the effectiveness of the Incredible Years Basic Parent Training (IY) in hyperactive and…

The health abnormalities under the technogenic exposures risks analysis

NASA Astrophysics Data System (ADS)

Fedorova, E. V.; Malyshev, V. S.; Borovkova, A. M.

2017-11-01

A number of the medico-ecological orientation subjects are included in the curricula of the masters being trained in the teaching course 13.04.02 “Power industry and electrical equipment” and had elected the courses “Anthropogenic safety in power industry and electrical equipment” of the engineering ecology and labor safety department (EE and LS) of NRU “MPEI”. The anthropogenic safety specialist is to know all consequences suffers of such disciplines on account of the human person being influenced with the anthropogenic stress firstly. Energetic is to be obviously foreground in the environment pollution. Carbon, sulfurs, nitrogen oxides, heavy metals compounds, soot particles, benzapiren are arrived to the atmospheric air. The receipt of the harmful substances with an inhaled air leads to the respiratory organs pathology, organism adaptation properties tension and the population morbidity increase. The discipline “The Human physiology” developed on EE and LS chair and being taught of the first course of a magistracy first semester, helps to understand these above-mentioned processes. The general questions of human physiology being besides, all the students are gotten acquainted with ecological and production factors on a human body adverse impacts consequences and with the methods of its analysis, prevention and health risks studies. The most part of a course is presented with the practical trainings permitting the students to gain the basic skills of an organism functional condition main systems for analysis. The innovative “bronkhofonografiya” technique (with the CDC applications “Pattern-1” EE and LS chairs developed) is used for the respiratory organs conditions analysis along with the traditional spirometry methods.

Professional Preparation for Careers in Safety.

ERIC Educational Resources Information Center

Della-Giustina, Daniel

There has been a long existing need for individuals with extensive training and concentration in safety studies. The foundation areas upon which a curriculum for training safety practitioners is based should include: (1) trends in accident prevention and control; (2) safety analysis of human and machine tasks; (3) hazard identification and control…

Virtual Safety Training.

ERIC Educational Resources Information Center

Fuller, Scott; Davis, Jason

2003-01-01

The Multimedia Tool Box Talk is a web-based quick reference safety guide and training tool for construction personnel. An intended outcome of this effort was to provide an efficient and effective way to locate and interpret crucial safety information while at the job site. The tool includes information from the Occupational Safety and Health…

Training cognitive control in older adults with the space fortress game: the role of training instructions and basic motor ability.

PubMed

Blumen, Helena M; Gopher, Daniel; Steinerman, Joshua R; Stern, Yaakov

2010-01-01

This study examined if and how cognitively healthy older adults can learn to play a complex computer-based action game called the Space Fortress (SF) as a function of training instructions [Standard vs. Emphasis Change (EC); e.g., Gopher et al., 1989] and basic motor ability. A total of 35 cognitively healthy older adults completed a 3-month SF training program with three SF sessions weekly. Twelve 3-min games were played during each session. Basic motor ability was assessed with an aiming task, which required rapidly rotating a spaceship to shoot targets. Older adults showed improved performance on the SF task over time, but did not perform at the same level as younger adults. Unlike studies of younger adults, overall SF performance in older adults was greater following standard instructions than following EC instructions. However, this advantage was primarily due to collecting more bonus points and not - the primary goal of the game - shooting and destroying the fortress, which in contrast benefited from EC instructions. Basic motor ability was low and influenced many different aspects of SF game learning, often interacted with learning rate, and influenced overall SF performance. These findings show that older adults can be trained to deal with the complexity of the SF task but that overall SF performance, and the ability to capitalize on EC instructions, differs when a basic ability such as motor control is low. Hence, the development of this training program as a cognitive intervention that can potentially compensate for age-related cognitive decline should consider that basic motor ability can interact with the efficiency of training instructions that promote the use of cognitive control (e.g., EC instructions) - and the confluence between such basic abilities and higher-level cognitive control abilities should be further examined.

Training Cognitive Control in Older Adults with the Space Fortress Game: The Role of Training Instructions and Basic Motor Ability

PubMed Central

Blumen, Helena M.; Gopher, Daniel; Steinerman, Joshua R.; Stern, Yaakov

2010-01-01

This study examined if and how cognitively healthy older adults can learn to play a complex computer-based action game called the Space Fortress (SF) as a function of training instructions [Standard vs. Emphasis Change (EC); e.g., Gopher et al., 1989] and basic motor ability. A total of 35 cognitively healthy older adults completed a 3-month SF training program with three SF sessions weekly. Twelve 3-min games were played during each session. Basic motor ability was assessed with an aiming task, which required rapidly rotating a spaceship to shoot targets. Older adults showed improved performance on the SF task over time, but did not perform at the same level as younger adults. Unlike studies of younger adults, overall SF performance in older adults was greater following standard instructions than following EC instructions. However, this advantage was primarily due to collecting more bonus points and not – the primary goal of the game – shooting and destroying the fortress, which in contrast benefited from EC instructions. Basic motor ability was low and influenced many different aspects of SF game learning, often interacted with learning rate, and influenced overall SF performance. These findings show that older adults can be trained to deal with the complexity of the SF task but that overall SF performance, and the ability to capitalize on EC instructions, differs when a basic ability such as motor control is low. Hence, the development of this training program as a cognitive intervention that can potentially compensate for age-related cognitive decline should consider that basic motor ability can interact with the efficiency of training instructions that promote the use of cognitive control (e.g., EC instructions) – and the confluence between such basic abilities and higher-level cognitive control abilities should be further examined. PMID:21120135

Assessing safety awareness and knowledge and behavioral change among West Virginia loggers

PubMed Central

Helmkamp, J; Bell, J; Lundstrom, W; Ramprasad, J; Haque, A

2004-01-01

Objective: To determine if a video used during logger training influences safety attitude, knowledge, and workplace habits. Method: From April 2002 to October 2003, loggers receiving training through the West Virginia Division of Forestry were given a new safety module. This consisted of a pre-training survey, viewing video, brief introduction to field safety guide, and an immediate post-training survey. Six months after training, loggers were contacted by telephone to assess workplace behavioral changes. Results: 1197 loggers attended 80 training sessions and completed surveys; 21% were contacted at follow up. Pre-training surveys indicated that half said "accidents" were part of the job and had experienced a "close call" in their work. An overwhelming majority felt that safety management and periodic meetings were important. Over 75% indicated they would not take risks in order to make a profit. Several statistically significant improvements were noted in safety knowledge after viewing the video: logger's location in relation to the tree stump during fatal incidents and the pictorial identification of an overloaded truck and the safest cutting notch. At follow up, many of the loggers said they related to the real life victim stories portrayed in the video. Further, the field guide served as a quick and easy reference and taught them valuable tips on safe cutting and felling. Conclusions: Significant changes in safety knowledge and attitude among certified loggers resulted from viewing the video during training. Subsequent use of the video and field guide at the worksite encouraged positive change in self reported work habits and practices. PMID:15314051

Individuals with severely impaired vision can learn useful orientation and mobility skills in virtual streets and can use them to improve real street safety.

PubMed

Bowman, Ellen Lambert; Liu, Lei

2017-01-01

Virtual reality has great potential in training road safety skills to individuals with low vision but the feasibility of such training has not been demonstrated. We tested the hypotheses that low vision individuals could learn useful skills in virtual streets and could apply them to improve real street safety. Twelve participants, whose vision was too poor to use the pedestrian signals were taught by a certified orientation and mobility specialist to determine the safest time to cross the street using the visual and auditory signals made by the start of previously stopped cars at a traffic-light controlled street intersection. Four participants were trained in real streets and eight in virtual streets presented on 3 projection screens. The crossing timing of all participants was evaluated in real streets before and after training. The participants were instructed to say "GO" at the time when they felt the safest to cross the street. A safety score was derived to quantify the GO calls based on its occurrence in the pedestrian phase (when the pedestrian sign did not show DON'T WALK). Before training, > 50% of the GO calls from all participants fell in the DON'T WALK phase of the traffic cycle and thus were totally unsafe. 20% of the GO calls fell in the latter half of the pedestrian phase. These calls were unsafe because one initiated crossing this late might not have sufficient time to walk across the street. After training, 90% of the GO calls fell in the early half of the pedestrian phase. These calls were safer because one initiated crossing in the pedestrian phase and had at least half of the pedestrian phase for walking across. Similar safety changes occurred in both virtual street and real street trained participants. An ANOVA showed a significant increase of the safety scores after training and there was no difference in this safety improvement between the virtual street and real street trained participants. This study demonstrated that virtual reality-based orientation and mobility training could be as efficient as real street training in improving street safety in individuals with severely impaired vision.

Hazardous materials on golf courses: Experience and knowledge of golf course superintendents and grounds maintenance workers from seven states

PubMed Central

Arcury-Quandt, Alice E.; Gentry, Amanda L.; Marín, Antonio J.

2011-01-01

Background The golf course industry has a growing Latino work force. Little occupational health research has addressed this work force. This paper examines golf course superintendents’ and Latino grounds maintenance workers’ pesticide knowledge, beliefs, and safety training. In particular, it focuses on knowledge of and adherence to OSHA Right-to-Know regulations. Methods In person, in-depth interviews were conducted with ten golf course superintendents in five states and with sixteen Latino grounds maintenance workers in four states. Results Few superintendents were in compliance with Right-to-Know regulations or did pesticide safety training with all of their workers. Few workers had any pesticide safety knowledge. Most safety training on golf courses was rudimentary and focused on machine safety, and was usually conducted in the off-season or on rainy days, not before workers were assigned tasks. Conclusions More Right-to-Know training is necessary for superintendents and grounds maintenance workers. Culturally and linguistically appropriate Spanish language materials need to be developed or made more widely available to train workers. Better enforcement of safety and training regulations is necessary. PMID:21360723

Retention of basic life support knowledge, self-efficacy and chest compression performance in Thai undergraduate nursing students.

PubMed

Partiprajak, Suphamas; Thongpo, Pichaya

2016-01-01

This study explored the retention of basic life support knowledge, self-efficacy, and chest compression performance among Thai nursing students at a university in Thailand. A one-group, pre-test and post-test design time series was used. Participants were 30 nursing students undertaking basic life support training as a care provider. Repeated measure analysis of variance was used to test the retention of knowledge and self-efficacy between pre-test, immediate post-test, and re-test after 3 months. A Wilcoxon signed-rank test was used to compare the difference in chest compression performance two times. Basic life support knowledge was measured using the Basic Life Support Standard Test for Cognitive Knowledge. Self-efficacy was measured using the Basic Life Support Self-Efficacy Questionnaire. Chest compression performance was evaluated using a data printout from Resusci Anne and Laerdal skillmeter within two cycles. The training had an immediate significant effect on the knowledge, self-efficacy, and skill of chest compression; however, the knowledge and self-efficacy significantly declined after post-training for 3 months. Chest compression performance after training for 3 months was positively retaining compared to the first post-test but was not significant. Therefore, a retraining program to maintain knowledge and self-efficacy for a longer period of time should be established after post-training for 3 months. Copyright © 2015 Elsevier Ltd. All rights reserved.

An Evaluation of the Employee Training and Development Process for Nicolet Area Technical College's Basic Education Program.

ERIC Educational Resources Information Center

Karl, Luis C.

The adult basic education (ABE) program at Nicolet Area Technical College (NATC) evaluated its training and development (T&D) process for new basic education instructors. The study gathered monitoring and screening criteria that addressed valuable components for use in an instrument for validating effectiveness of the ABE program (T&D)…

Research projects in the Surgeon-Scientist and Clinician-Investigator programs at the University of Toronto (1987-2016): a cohort study.

PubMed

Goldenberg, Neil M; Steinberg, Benjamin E; Rutka, James T; Chen, Robert; Cabral, Val; Rosenblum, Norman D; Kapus, Andras; Lee, Warren L

2016-01-01

Physicians have traditionally been at the forefront of medical research, bringing clinical questions to the laboratory and returning with ideas for treatment. However, we have anecdotally observed a decline in the popularity of basic science research among trainees. We hypothesized that fewer resident physicians have been pursuing basic science research training over time. We examined records from residents in the Surgeon-Scientist and Clinician-Investigator programs at the University of Toronto (1987-2016). Research by residents was categorized independently by 2 raters as basic science, clinical epidemiology or education-related based on the title of the project, the name of the supervisor and Pubmed searches. The study population was divided into quintiles of time, and the proportion pursuing basic science training in each quintile was calculated. Agreement between the raters was 100%; the categorization of the research topic remained unclear in 9 cases. The proportion of trainees pursuing basic science training dropped by 60% from 1987 to 2016 ( p = 0.005). Significantly fewer residents in the Surgeon-Scientist and Clinician-Investigator Programs at the University of Toronto are pursuing training in the basic sciences as compared with previous years.

Label Review Training: Module 1: Label Basics, Page 16

EPA Pesticide Factsheets

This module of the pesticide label review training provides basic information about pesticides, their labeling and regulation, and the core principles of pesticide label review. Learn about the importance of labels and the role in enforcement.

Criticality Safety Evaluation of the LLNL Inherently Safe Subcritical Assembly (ISSA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Percher, Catherine

2012-06-19

The LLNL Nuclear Criticality Safety Division has developed a training center to illustrate criticality safety and reactor physics concepts through hands-on experimental training. The experimental assembly, the Inherently Safe Subcritical Assembly (ISSA), uses surplus highly enriched research reactor fuel configured in a water tank. The training activities will be conducted by LLNL following the requirements of an Integration Work Sheet (IWS) and associated Safety Plan. Students will be allowed to handle the fissile material under the supervision of LLNL instructors. This report provides the technical criticality safety basis for instructional operations with the ISSA experimental assembly.

Integrating basic science in academic cardiology training: two international perspectives on a common challenge.

PubMed

Bode, Michael F; Hilgendorf, Ingo

2018-06-09

Political bodies and professional societies acknowledge that translational research benefits from researchers trained in both, clinical medicine and basic science. Yet, few physicians undergoing clinical training in cardiology seek this dual career (Milewicz et al. J Clin Invest 125:3742-3747, 2015). The reasons are likely manifold, but with cardiology having become increasingly interventional and facing economic pressure, how much attention, credit, and encouragement is given to physicians interested in basic cardiovascular science? Having studied and worked in hospitals and laboratories, in both Germany and the USA, we aim to compare in this article how basic science education is currently integrated into cardiology training at German and US university hospitals, from medical school to more advanced career stages. By doing so, we hope to provide some outside perspectives to young physicians and decision makers alike, that may inspire changes to curricula in the respective countries and around the world.

75 FR 32943 - Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-10

... basic safety and essential performance--Collateral standard: Electromagnetic compatibility--Requirements... standard: Electromagnetic compatibility--Requirements and tests 5-34 5-53 IEC 60601-1-2 Third edition 2007... for basic safety and essential performance--Collateral standard: Electromagnetic compatibility...

Positive Effects of an Anti-Aggression and De-Escalation Training on Ward Atmosphere and Subjective Safety May Depend on Previous Training Experience.

PubMed

Fröhlich, Daniela; Rabenschlag, Franziska; Schoppmann, Susanne; Borgwardt, Stefan; Lang, Undine E; Huber, Christian G

2018-01-01

Anti-aggression and de-escalation (ADE) trainings of health-care professionals working on psychiatric inpatient wards have been shown to increase staff knowledge and confidence, which could be connected with higher subjective safety. Additionally, a potential reduction of aggressive incidents could improve ward atmosphere. Thus, the current study aimed to investigate the effects of ADE training on ward atmosphere and subjective safety. In 2015, an ADE training was established at the Psychiatric University Clinics (UPK), University of Basel. Nursing staff from 22 wards received theoretical and practical training over the course of 5 days. Ward atmosphere and subjective safety were assessed using the Essen Climate Evaluation Schema (EssenCES). A total of 46 people had been assessed in 2012 before training implementation (baseline), and 45 persons in 2016 after implementation. In the 2016 group, 23 people had previously participated in an ADE training, and 22 were first-time participants. Patients' coherence ( p  = 0.004), subjective safety ( p  = 0.004), and ward atmosphere ( p  = 0.001) were rated significantly higher by first-time ADE training participants compared to baseline, and patients' coherence ( p  = 0.029) and ward atmosphere ( p  = 0.011) were rated significantly higher by first-time ADE training participants than by nurses with prior ADE training. There were no significant differences regarding any EssenCES ratings by nurses with prior ADE training compared to baseline. ADE training was exclusively connected with higher ratings on most EssenCES scales for first-time participants. This indicates that the positive effects of ADE training may depend on previous training experience.

Using a Training Video to Improve Agricultural Workers' Knowledge of On-Farm Food Safety

ERIC Educational Resources Information Center

Mathiasen, Lisa; Morley, Katija; Chapman, Benjamin; Powell, Douglas

2012-01-01

A training video was produced and evaluated to assess its impact on the food safety knowledge of agricultural workers. Increasing food safety knowledge on the farm may help to improve the safety of fresh produce. Surveys were used to measure workers' food safety knowledge before and after viewing the video. Focus groups were used to determine…

Adjusting the Passing Scores for Gearing up for Safety: Production Agriculture Safety Training for Youth Curriculum Test Instruments

ERIC Educational Resources Information Center

Hoover, William Brian; French, Brian F.; Field, William E.; Tormoehlen, Roger L.

2012-01-01

Minimum passing scores for the Gearing Up for Safety: Production Agriculture Safety Training for Youth curriculum (Gearing Up for Safety) were set in 2006 with widely used and established procedures by efforts of subject matter experts (French, Breidenbach et al., 2007; French, Field, and Tormoehlen, 2006, 2007). While providing a research-based…

The sanitary conditions of food service establishments and food safety knowledge and practices of food handlers in bahir dar town.

PubMed

Kibret, Mulugeta; Abera, Bayeh

2012-03-01

Lack of basic infrastructure, poor knowledge of hygiene and practices in food service establishments can contribute to outbreaks of foodborne illnesses. The aims of this study were to investigate the food safety knowledge and practices of food handlers and to assess the sanitary conditions of food service establishments in Bahir Dar town. A cross-sectional study was conducted in Bahir Dar in May 2011 and data were collected using questionnaire and observation checklist on employees' knowledge of food hygiene and their practices as well on sanitary conditions of the food service establishments The median age of the food handlers was 22 years and among the 455 subjects 99 (21.8%) have had food hygiene training. Sixty six percent of the establishments had flush toilets whereas 5.9% of the establishment had no toilet. Only 149 (33.6%) of the establishments had a proper solid waste collection receptacle and there was statistically significant association between the sanitary conditions and license status of the establishments (p=0.01). Most of all, knowledge gap in food hygiene and handling practice was observed. In addition, there was statistically significant difference between trained (professional) handlers and non-trained handlers with regard to food hygiene practices (p<0.05). While more than 50% of the handlers prepare meals ahead of the peak selling time, more than 50% of the left over was poorly managed. This study revealed poor sanitary conditions and poor food hygiene practices of handlers. Educational programs targeted at improving the attitude of food handlers and licensing and regular inspections have been recommended.

Best practices to promote occupational safety and satisfaction: a comparison of three North American hospitals.

PubMed

McCaughey, Deirdre; DelliFraine, Jami; Erwin, Cathleen O

2015-01-01

Hospitals in North America consistently have employee injury rates ranking among the highest of all industries. Organizations that mandate workplace safety training and emphasize safety compliance tend to have lower injury rates and better employee safety perceptions. However, it is unclear if the work environment in different national health care systems (United States vs. Canada) is associated with different employee safety perceptions or injury rates. This study examines occupational safety and workplace satisfaction in two different countries with employees working for the same organization. Survey data were collected from environmental services employees (n = 148) at three matched hospitals (two in Canada and one in the United States). The relationships that were examined included: (1) safety leadership and safety training with individual/unit safety perceptions; (2) supervisor and coworker support with individual job satisfaction and turnover intention; and (3) unit turnover, labor usage, and injury rates. Hierarchical regression analysis and ANO VA found safety leadership and safety training to be positively related to individual safety perceptions, and unit safety grade and effects were similar across all hospitals. Supervisor and coworker support were found to be related to individual and organizational outcomes and significant differences were found across the hospitals. Significant differences were found in injury rates, days missed, and turnover across the hospitals. This study offers support for occupational safety training as a viable mechanism to reduce employee injury rates and that a codified training program translates across national borders. Significant differences were found.between the hospitals with respect to employee and organizational outcomes (e.g., turnover). These findings suggest that work environment differences are reflective of the immediate work group and environment, and may reflect national health care system differences.

10 CFR 851.25 - Training and information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.25 Training and information. (a) Contractors must develop and implement a worker safety and health training and information... initial assignment to a job involving exposure to a hazard; (2) Periodic training as often as necessary to...

30 CFR 250.1507 - How will BSEE measure training results?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 2 2012-07-01 2012-07-01 false How will BSEE measure training results? 250.1507 Section 250.1507 Mineral Resources BUREAU OF SAFETY AND ENVIRONMENTAL ENFORCEMENT, DEPARTMENT OF... and Production Safety Training § 250.1507 How will BSEE measure training results? BSEE may...

30 CFR 250.1507 - How will BSEE measure training results?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 2 2013-07-01 2013-07-01 false How will BSEE measure training results? 250.1507 Section 250.1507 Mineral Resources BUREAU OF SAFETY AND ENVIRONMENTAL ENFORCEMENT, DEPARTMENT OF... and Production Safety Training § 250.1507 How will BSEE measure training results? BSEE may...

30 CFR 250.1507 - How will BSEE measure training results?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 2 2014-07-01 2014-07-01 false How will BSEE measure training results? 250.1507 Section 250.1507 Mineral Resources BUREAU OF SAFETY AND ENVIRONMENTAL ENFORCEMENT, DEPARTMENT OF... and Production Safety Training § 250.1507 How will BSEE measure training results? BSEE may...

Training Requirements in OSHA Standards. Revised.

ERIC Educational Resources Information Center

Occupational Safety and Health Administration, Washington, DC.

This booklet contains excerpts of the training-related requirements of the standards promulgated by the Occupational Safety and Health Administration (OSHA). It is designed as an aid for employers, safety and health professionals, and others who need to know training requirements. (References to training may be difficult to locate in the long and…

49 CFR 214.331 - Definite train location.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Definite train location. 214.331 Section 214.331... location. A roadway worker may establish on-track safety by using definite train location only where... may only use definite train location to establish on-track safety at points where such procedures were...

Occupational Pesticide Exposures and Respiratory Health

PubMed Central

Ye, Ming; Beach, Jeremy; Martin, Jonathan W.; Senthilselvan, Ambikaipakan

2013-01-01

Pesticides have been widely used to control pest and pest-related diseases in agriculture, fishery, forestry and the food industry. In this review, we identify a number of respiratory symptoms and diseases that have been associated with occupational pesticide exposures. Impaired lung function has also been observed among people occupationally exposed to pesticides. There was strong evidence for an association between occupational pesticide exposure and asthma, especially in agricultural occupations. In addition, we found suggestive evidence for a link between occupational pesticide exposure and chronic bronchitis or COPD. There was inconclusive evidence for the association between occupational pesticide exposure and lung cancer. Better control of pesticide uses and enforcement of safety behaviors, such as using personal protection equipment (PPE) in the workplace, are critical for reducing the risk of developing pesticide-related symptoms and diseases. Educational training programs focusing on basic safety precautions and proper uses of personal protection equipment (PPE) are possible interventions that could be used to control the respiratory diseases associated with pesticide exposure in occupational setting. PMID:24287863

Urology residents training in laparoscopic surgery. Development of a virtual reality model.

PubMed

Gutiérrez-Baños, J L; Ballestero-Diego, R; Truan-Cacho, D; Aguilera-Tubet, C; Villanueva-Peña, A; Manuel-Palazuelos, J C

2015-11-01

The training and learning of residents in laparoscopic surgery has legal, financial and technological limitations. Simulation is an essential tool in the training of residents as a supplement to their training in laparoscopic surgery. The training should be structured in an appropriate environment, with previously established and clear objectives, taught by professionals with clinical and teaching experience in simulation. The training should be conducted with realistic models using animals and ex-vivo tissue from animals. It is essential to incorporate mechanisms to assess the objectives during the residents' training progress. We present the training model for laparoscopic surgery for urology residents at the University Hospital Valdecilla. The training is conducted at the Virtual Hospital Valdecilla, which is associated with the Center for Medical Simulation in Boston and is accredited by the American College of Surgeons. The model is designed in 3 blocks, basic for R1, intermediate for R2-3 and advanced for R4-5, with 9 training modules. The training is conducted in 4-hour sessions for 4 afternoons, for 3 weeks per year of residence. Residents therefore perform 240 hours of simulated laparoscopic training by the end of the course. For each module, we use structured objective assessments to measure each resident's training progress. Since 2003, 9 urology residents have been trained, in addition to the 5 who are currently in training. The model has undergone changes according to the needs expressed in the student feedback. The acquisition of skills in a virtual reality model has enabled the safe transfer of those skills to actual practice. A laparoscopic surgery training program designed in structured blocks and with progressive complexity provides appropriate training for transferring the skills acquired using this model to an actual scenario while maintaining patient safety. Copyright © 2015 AEU. Publicado por Elsevier España, S.L.U. All rights reserved.

Training fellows in paediatric cardiology: the Harvard experience.

PubMed

Brown, David W; Allan, Catherine K; Newburger, Jane W

2016-12-01

The Fellowship Program of the Department of Cardiology at Boston Children's Hospital seeks to train academically oriented leaders in clinical care and laboratory and clinical investigation of cardiovascular disease in the young. The core clinical fellowship involves 3 years in training, comprising 24 months of clinical rotations and 12 months of elective and research experience. Trainees have access to a vast array of research opportunities - clinical, basic, and translational. Clinical fellows interested in basic science may reverse the usual sequence and start their training in the laboratory, deferring clinical training for 1 or more years. An increasing number of clinical trainees apply to spend a fourth year as a senior fellow in one of the subspecialty areas of paediatric cardiology. From the founding of the Department to the present, we have maintained a fundamental and unwavering commitment to training and education in clinical care and research in basic science and clinical investigation, as well as to the training of outstanding young clinicians and investigators.

Foremen’s Intervention to Prevent Falls and Increase Safety Communication at Residential Construction Sites

PubMed Central

Kaskutas, Vicki; Buckner-Petty, Skye; Dale, Ann Marie; Gaal, John; Evanoff, Bradley A.

2017-01-01

Background This research aimed to improve residential construction foremen’s communication skills and safety behaviors of their crewmembers when working at heights. Methods Eighty-four residential construction foremen participated in the 8-hour fall prevention and safety communication training. We compared pre-intervention surveys from foremen and their crewmembers to measure the effect of training. Results Foremen and crewmembers’ ratings showed improvements in fall prevention knowledge, behaviors, and safety communication and were sustained 6-months post-training, with emphasized areas demonstrating larger increases. Ratings were similar between foremen and crewmembers, suggesting that the foremen effectively taught their crew and assigned accurate ratings. Based upon associations between safety behaviors and reported falls observed in prior research, we would expect a 16.6% decrease in the one year cumulative incidence of self-reported falls post-intervention. Conclusions This intervention improved safety knowledge and behaviors of a large number of workers by training construction foremen in fall prevention and safety communication skills. PMID:27345465

The American Medical Association Older Driver Curriculum for health professionals: changes in trainee confidence, attitudes, and practice behavior.

PubMed

Meuser, Thomas M; Carr, David B; Irmiter, Cheryl; Schwartzberg, Joanne G; Ulfarsson, Gudmundur F

2010-01-01

Few gerontology and geriatrics professionals receive training in driver fitness evaluation, state reporting of unfit drivers, or transportation mobility planning yet are often asked to address these concerns in the provision of care to older adults. The American Medical Association (AMA) developed an evidence-based, multi-media Curriculum to promote basic competences. This study evaluated reported changes in practice behaviors 3 months posttraining in 693 professionals trained via the AMA approach. Eight Teaching Teams, designated and trained by AMA staff, offered 22 training sessions across the United States in 2006 to 2007. Trainees (67% female; mean age 46) completed a pretest questionnaire and a posttest administered by mail. Physicians were the largest professional group (32%). Although many trainees acknowledged having conversations with patients about driving at pretest, few endorsed utilizing specific techniques recommended by the AMA prior to this training. The posttest response rate was 34% (n = 235). Significant improvements in reported attitudes, confidence, and practices were found across measured items. In particular, posttest data indicated new adoption of in-office screening techniques, chart documentation of driver safety concerns, and transportation alternative planning strategies. Findings suggest that a well-designed, one-time continuing education intervention can enhance health professional confidence and clinical practice concerning driver fitness evaluation and mobility planning. Targeted dissemination of this Curriculum (in-person and online) will allow more to benefit in the future.

The Development and Application of Simulative Insulation Resistance Tester

NASA Astrophysics Data System (ADS)

Jia, Yan; Chai, Ziqi; Wang, Bo; Ma, Hao

2018-02-01

The insulation state determines the performance and insulation life of electrical equipment, so it has to be judged in a timely and accurate manner. Insulation resistance test, as the simplest and most basic test of high voltage electric tests, can measure the insulation resistance and absorption ratio which are effective criterion of part or whole damp or dirty, breakdown, severe overheating aging and other insulation defects. It means that the electrical test personnel need to be familiar with the principle of insulation resistance test, and able to operate the insulation resistance tester correctly. At present, like the insulation resistance test, most of electrical tests are trained by physical devices with the real high voltage. Although this allows the students to truly experience the test process and notes on security, it also has certain limitations in terms of safety and test efficiency, especially for a large number of new staves needing induction training every year. This paper presents a new kind of electrical test training system based on the simulative device of dielectric loss measurement and simulative electrical testing devices. It can not only overcome the defects of current training methods, but also provide other advantages in economical efficiency and scalability. That makes it possible for the system to be allied in widespread.

Improving patient safety by instructional systems design

PubMed Central

Battles, J B

2006-01-01

Education and training are important elements in patient safety, both as a potential contributing factor to risks and hazards of healthcare associated injury or harm and as an intervention to be used in eliminating or preventing such harm. All too often we have relied on training as the only interventions for patient safety without examining other alternatives or realizing that, in some cases, the training systems themselves are part of the problem. One way to ensure safety by design is to apply established design principles to education and training. Instructional systems design (ISD) is a systematic method of development of education and training programs for improved learner performance. The ISD process involves five integrated steps: analysis, development, design, implementation, and evaluation (ADDIE). The application of ISD using the ADDIE approach can eliminate or prevent education and training from being a contributing factor of health associated injury or harm, and can also be effective in preventing injury or harm. PMID:17142604

Effects of safety and health training on work-related injury among construction laborers.

PubMed

Dong, Xiuwen; Entzel, Pamela; Men, Yurong; Chowdhury, Risana; Schneider, Scott

2004-12-01

This study was designed to evaluate the effects of safety and health training on work-related injury in the construction industry. Union health insurance records, union training records, and workers compensation data for 1993 and 1994 were analyzed for more than 8000 construction laborers in Washington State. After controlling for demographic factors, laborers who received safety and health training during the study period were 12% (95% confidence interval [CI] = 0.75-1.02) less likely than nontrained laborers to file for workers compensation. Among workers 16 to 24 years old, training was associated with a 42% (95% CI = 0.35-0.95) reduction in claims. These findings provide evidence of the effectiveness of safety and health training in preventing occupational injuries among construction laborers, particularly among younger workers. However, the results cover only a limited time and the long-term effects remain unclear.

Healthcare-associated infections in intensive care units: epidemiology and infection control in low-to-middle income countries.

PubMed

Alp, Emine; Damani, Nizam

2015-10-29

Healthcare-associated infections (HAIs) are major patient safety problems in hospitals, especially in intensive care units (ICUs). Patients in ICUs are prone to HAIs due to reduced host defense mechanisms, low compliance with infection prevention and control (IPC) measures due to lack of education and training, and heavy workload and low staffing levels, leading to cross-transmission of microorganisms from patient to patient. Patients with HAIs have prolonged hospital stays, and have high morbidity and mortality, thus adding economic burden on the healthcare system. For various reasons, in low-to-middle income countries (LMICs), the scale of the problem is huge; each year, many people die from HAIs. In this review, epidemiology of HAIs and infection prevention and control measures in ICUs is discussed, with especial emphasis on LMICs. High rates of HAIs caused by multidrug-resistant organisms (MDROs) are serious problems in ICUs in LMICs. In view of increasing prevalence of MDROs, LMICs should establish effective IPC infrastructure, appoint IPC teams, and provide adequate training and resources. These resources to establish and appoint IPC teams can be released by avoiding ritualistic, wasteful, and unsafe IPC practices, and by diverting resources to implement basic IPC measures, including early detection of infection, isolation of patients, application of appropriate IPC precautions, adherence to hand hygiene, and implementation of HAIs care bundles and basic evidence-based practices.

Impacts of Health and Safety Education: Comparison of Worker Activities Before and After Training

PubMed Central

Becker, Paul; Morawetz, John

2014-01-01

Background The International Chemical Workers Union Council (ICWUC) Center for Worker Health and Safety Education in Cincinnati, Ohio, trains workers to protect themselves from hazards due to chemical spills and other chemical exposures. We evaluated whether the ICWUC Hazardous Waste Worker Training Program affects the attitudes and post-training activities, of trained union workers. Methods Detailed survey questionnaires were administered to 55 workers prior to and 14–18 months following training. Surveys queried trainees’ interest and involvement in safety and health, use of information resources, training activities at their worksite, and their attempts and successes at making worksite improvements. Results Post-training, the study population showed an increase in training of other workers, use of resources, attempts at improvements, success rates for those attempting change, and overall success at making improvements. Self-reported interest decreased, and self reported involvement in health and safety did not significantly change. Conclusion The study demonstrates that workers are more willing to attempt to change worksite conditions following training, and that their efficacy at making changes is substantially greater than before they were trained. The study confirms earlier work and strengthens these conclusions by using statistically tested comparisons of impact measures pre- and post-training. PMID:15202126

Aircraft Electronics Maintenance Training Simulator. Curriculum Outlines.

ERIC Educational Resources Information Center

Blackhawk Technical Coll., Janesville, WI.

Instructional materials are provided for nine courses in an aircraft electronics maintenance training program. Courses are as follows: aviation basic electricity, direct current and alternating current electronics, basic avionic installations, analog electronics, digital electronics, microcomputer electronics, radio communications, aircraft…

The Incorporation of Basic Life-Support Training in the Pharmacy Curriculum

ERIC Educational Resources Information Center

Masoud, Asaad N.

1976-01-01

Pharmacists have a unique role to play in providing basic life-support since they are the health professionals who are most available and who enjoy the greatest contact with the public. Training procedures are described. (LBH)

A theory-driven, longitudinal evaluation of the impact of team training on safety culture in 24 hospitals.

PubMed

Jones, Katherine J; Skinner, Anne M; High, Robin; Reiter-Palmon, Roni

2013-05-01

Effective teamwork facilitates collective learning, which is integral to safety culture. There are no rigorous evaluations of the impact of team training on the four components of safety culture-reporting, just, flexible and learning cultures. We evaluated the impact of a year-long team training programme on safety culture in 24 hospitals using two theoretical frameworks. We used two quasi-experimental designs: a cross-sectional comparison of hospital survey on patient safety culture (HSOPS) results from an intervention group of 24 hospitals to a static group of 13 hospitals and a pre-post comparison of HSOPS results within intervention hospitals. Dependent variables were HSOPS items representing the four components of safety culture; independent variables were derived from items added to the HSOPS that measured the extent of team training, learning and transfer. We used a generalised linear mixed model approach to account for the correlated nature of the data. 59% of 2137 respondents from the intervention group reported receiving team training. Intervention group HSOPS scores were significantly higher than static group scores in three dimensions assessing the flexible and learning components of safety culture. The distribution of the adoption of team behaviours (transfer) varied in the intervention group from 2.8% to 31.0%. Adoption of team behaviours was significantly associated with odds of an individual reacting more positively at reassessment than baseline to nine items reflecting all four components of safety culture. Team training can result in transformational change in safety culture when the work environment supports the transfer of learning to new behaviour.

Comparison of stress fractures of male and female recruits during basic training in the Israeli anti-aircraft forces.

PubMed

Gam, Arnon; Goldstein, Liav; Karmon, Yuval; Mintser, Igor; Grotto, Itamar; Guri, Alex; Goldberg, Avishay; Ohana, Nissim; Onn, Erez; Levi, Yehezkel; Bar-Dayan, Yaron

2005-08-01

In military basic training, stress fractures are a common orthopedic problem. Female recruits have a significantly higher incidence of stress fractures than do male recruits. Because the Israeli Defense Forces opened traditionally male roles in combat units to female recruits, their high risk for stress fractures is of concern. To compare the prevalence of stress fractures during Israeli Defense Forces anti-aircraft basic training among otherwise healthy young male and female recruits, in terms of anatomic distribution and severity. Ten mixed gender batteries, including 375 male recruits and 138 female recruits, carried out basic training in the Israeli anti-aircraft corps between November 1999 and January 2003. Each battery was monitored prospectively for 10 weeks of a basic training course. During that time, recruits who were suspected of having an overuse injury went through a protocol that included an orthopedic specialist physical examination followed by a radionuclide technetium bone scan, which was assessed by consultant nuclear medicine experts. The assessment included the anatomic site and the severity of the fractures, labeled as either high severity or low severity. Stress fractures were significantly more common among female recruits than among male recruits. A total of 42 male (11.2%) and 33 female (23.91%) recruits had positive bone scans for stress fractures (female:male relative ratio, 2.13; p < 0.001). Pelvic, femur, and tibia fractures were significantly more common among female recruits than among male recruits (p < 0.005). Female recruits had significantly more severe fractures in the tibia (p < 0.05). However, there was no significant difference in the severity of stress fractures in the femur or metatarsals between male and female recruits, as assessed by radionuclide uptake. We recommend that different training programs be assigned according to gender, in which female recruits would have a lower level of target strain or a more moderate incline of strain in the training program throughout basic training.

Box- or Virtual-Reality Trainer: Which Tool Results in Better Transfer of Laparoscopic Basic Skills?-A Prospective Randomized Trial.

PubMed

Brinkmann, Christian; Fritz, Mathias; Pankratius, Ulrich; Bahde, Ralf; Neumann, Philipp; Schlueter, Steffen; Senninger, Norbert; Rijcken, Emile

Simulation training improves laparoscopic performance. Laparoscopic basic skills can be learned in simulators as box- or virtual-reality (VR) trainers. However, there is no clear recommendation for either box or VR trainers as the most appropriate tool for the transfer of acquired laparoscopic basic skills into a surgical procedure. Both training tools were compared, using validated and well-established curricula in the acquirement of basic skills, in a prospective randomized trial in a 5-day structured laparoscopic training course. Participants completed either a box- or VR-trainer curriculum and then applied the learned skills performing an ex situ laparoscopic cholecystectomy on a pig liver. The performance was recorded on video and evaluated offline by 4 blinded observers using the Global Operative Assessment of Laparoscopic Skills (GOALS) score. Learning curves of the various exercises included in the training course were compared and the improvement in each exercise was analyzed. Surgical Skills Lab of the Department of General and Visceral Surgery, University Hospital Muenster. Surgical novices without prior surgical experience (medical students, n = 36). Posttraining evaluation showed significant improvement compared with baseline in both groups, indicating acquisition of laparoscopic basic skills. Learning curves showed almost the same progression with no significant differences. In simulated laparoscopic cholecystectomy, total GOALS score was significantly higher for the box-trained group than the VR-trained group (box: 15.31 ± 3.61 vs. VR: 12.92 ± 3.06; p = 0.039; Hedge׳s g* = 0.699), indicating higher technical skill levels. Despite both systems having advantages and disadvantages, they can both be used for simulation training for laparoscopic skills. In the setting with 2 structured, validated and almost identical curricula, the box-trained group appears to be superior in the better transfer of basic skills into an experimental but structured surgical procedure. Copyright © 2017 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Medical Holography for Basic Anatomy Training

DTIC Science & Technology

2013-12-01

Interservicel!ndustry Training, Simulation, and Education Conference (l/ITSEC) 2013 Medical Holography for Basic Anatomy Training Matthew Hackett...to the complex 3D structures inherent in human anatomy . One potential solution to this problem is to present medical content in three dimensions...traditional format via textbook handouts or through holography. Cognitive load analysis was performed to determine if a difference in cognitive effort was

Basic CNC Operation. Training Workbook [and] Assessment and Training Guide [and] Hands-on Assessment.

ERIC Educational Resources Information Center

Anoka-Hennepin Technical Coll., Minneapolis, MN.

This workbook is intended for students taking a course in basic computer numerical control (CNC) operation that was developed during a project to retrain defense industry workers at risk of job loss or dislocation because of conversion of the defense industry. The workbook contains daily training guides for each of the course's 13 sessions. Among…

SU-D-201-07: A Survey of Radiation Oncology Residents’ Training and Preparedness to Lead Patient Safety Programs in Clinics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spraker, M; Nyflot, M; Ford, E

Purpose: Safety and quality has garnered increased attention in radiation oncology, and physicians and physicists are ideal leaders of clinical patient safety programs. However, it is not clear whether residency programs incorporate formal patient safety training and adequately equip residents to assume this leadership role. A national survey was conducted to evaluate medical and physics residents’ exposure to safety topics and their confidence with the skills required to lead clinical safety programs. Methods: Radiation oncology residents were identified in collaboration with ARRO and AAPM. The survey was released in February 2016 via email using REDCap. This included questions about exposuremore » to safety topics, confidence leading safety programs, and interest in training opportunities (i.e. workshops). Residents rated their exposure, skills, and confidence on 4 or 5-point scales. Medical and physics residents responses were compared using chi-square tests. Results: Responses were collected from 56 of 248 (22%) physics and 139 of 690 (20%) medical residents. More than two thirds of all residents had no or only informal exposure to incident learning systems (ILS), root cause analysis (RCA), failure mode and effects analysis (FMEA), and the concept of human factors engineering (HFE). Likewise, 63% of residents had not heard of RO-ILS. Response distributions were similar, however more physics residents had formal exposure to FMEA (p<0.0001) and felt they were adequately trained to lead FMEAs in clinic (p<0.001) than medical residents. Only 36% of residents felt their patient safety training was adequate, and 58% felt more training would benefit their education. Conclusion: These results demonstrate that, despite increasing desire for patient safety training, medical and physics residents’ exposure to relevant concepts is low. Physics residents had more exposure to FMEA than medical residents, and were more confident in leading FMEA. This suggests that increasing resident exposure to specific topics may increase their confidence.« less

Children’s Safety Initiative: A National Assessment of Pediatric Educational Needs amongEmergency Medical Services Providers

PubMed Central

Hansen, Matthew; Meckler, Garth; Dickinson, Caitlyn; Dickenson, Kathryn; Jui, Jonathan; Lambert, William; Guise, Jeanne-Marie

2014-01-01

Objective Emergency Medical Services (EMS) providers may have critical knowledge gaps in pediatric care due to lack of exposure and training. There is currently little evidence to guide educators to the knowledge gaps most likely to improve patient safety. The objective of this study was to identify educational needs of EMS providers related to pediatric care in various domains in order to inform development of curricula. Methods The Children’s Safety Initiative-EMS performed a three-phase Delphi survey on patient safety in pediatric emergencies among providers and content experts in pediatric emergency care including physicians, nurses and pre-hospital providers of all levels. Each round included questions related to educational needs of providers or the effect of training on patient safety events. We identified knowledge gaps in the following domains: case exposure, competency and knowledge, assessment and decision making, and critical thinking and proficiency. Individual knowledge gaps were ranked by portion of respondents who ranked them “highly likely” (likert-type score 7–10 out of 10) to contribute to safety events. Results There were 737 respondents who were included in analysis of the first phase of the survey. Paramedics were 50.8% of respondents; EMT-Basics/first responders were 22% and physicians 11.4%. The top educational priorities identified in the final round of the survey include: pediatric airway management, responder anxiety when working with children, and general pediatric skills among providers. The top three needs in decision-making include knowing when to alter plans mid-course, knowing when to perform and advanced airway, and assessing pain in children. The top 3 technical or procedural skills needs were pediatric advanced airway, neonatal resuscitation, and intravenous/intraosseos access. For neonates, specific educational needs identified included knowing appropriate vital signs and preventing hypothermia. Conclusions This is the first large-scale Delphi survey related to pediatric pre-hospital education. Our results provide foundational information related to the educational needs of pre-hospital providers. Medical directors and educators can use the results to shape future curricular development. PMID:25296191

Children's safety initiative: a national assessment of pediatric educational needs among emergency medical services providers.

PubMed

Hansen, Matthew; Meckler, Garth; Dickinson, Caitlyn; Dickenson, Kathryn; Jui, Jonathan; Lambert, William; Guise, Jeanne-Marie

2015-01-01

Emergency medical services (EMS) providers may have critical knowledge gaps in pediatric care due to lack of exposure and training. There is currently little evidence to guide educators to the knowledge gaps that most need to be addressed to improve patient safety. The objective of this study was to identify educational needs of EMS providers related to pediatric care in various domains in order to inform development of curricula. The Children's Safety Initiative-EMS performed a three-phase Delphi survey on patient safety in pediatric emergencies among providers and content experts in pediatric emergency care, including physicians, nurses, and prehospital providers of all levels. Each round included questions related to educational needs of providers or the effect of training on patient safety events. We identified knowledge gaps in the following domains: case exposure, competency and knowledge, assessment and decision making, and critical thinking and proficiency. Individual knowledge gaps were ranked by portion of respondents who ranked them "highly likely" (Likert-type score 7-10 out of 10) to contribute to safety events. There were 737 respondents who were included in analysis of the first phase of the survey. Paramedics were 50.8% of respondents, EMT-basics/first responders were 22%, and physicians 11.4%. The top educational priorities identified in the final round of the survey include pediatric airway management, responder anxiety when working with children, and general pediatric skills among providers. The top three needs in decision-making include knowing when to alter plans mid-course, knowing when to perform an advanced airway, and assessing pain in children. The top 3 technical or procedural skills needs were pediatric advanced airway, neonatal resuscitation, and intravenous/intraosseous access. For neonates, specific educational needs identified included knowing appropriate vital signs and preventing hypothermia. This is the first large-scale Delphi survey related to pediatric prehospital education. Our results provide foundational information related to the educational needs of prehospital providers. Medical directors and educators can use the results to shape future curricular development.

Design of a Fatigue Detection System for High-Speed Trains Based on Driver Vigilance Using a Wireless Wearable EEG

PubMed Central

Zhang, Xiaoliang; Li, Jiali; Liu, Yugang; Zhang, Zutao; Wang, Zhuojun; Luo, Dianyuan; Zhou, Xiang; Zhu, Miankuan; Salman, Waleed; Hu, Guangdi; Wang, Chunbai

2017-01-01

The vigilance of the driver is important for railway safety, despite not being included in the safety management system (SMS) for high-speed train safety. In this paper, a novel fatigue detection system for high-speed train safety based on monitoring train driver vigilance using a wireless wearable electroencephalograph (EEG) is presented. This system is designed to detect whether the driver is drowsiness. The proposed system consists of three main parts: (1) a wireless wearable EEG collection; (2) train driver vigilance detection; and (3) early warning device for train driver. In the first part, an 8-channel wireless wearable brain-computer interface (BCI) device acquires the locomotive driver’s brain EEG signal comfortably under high-speed train-driving conditions. The recorded data are transmitted to a personal computer (PC) via Bluetooth. In the second step, a support vector machine (SVM) classification algorithm is implemented to determine the vigilance level using the Fast Fourier transform (FFT) to extract the EEG power spectrum density (PSD). In addition, an early warning device begins to work if fatigue is detected. The simulation and test results demonstrate the feasibility of the proposed fatigue detection system for high-speed train safety. PMID:28257073

A study to assess the influence of interprofessional point of care simulation training on safety culture in the operating theatre environment of a university teaching hospital.

PubMed

Hinde, Theresa; Gale, Thomas; Anderson, Ian; Roberts, Martin; Sice, Paul

2016-01-01

Interprofessional point of care or in situ simulation is used as a training tool in our operating theatre directorate with the aim of improving crisis behaviours. This study aimed to assess the impact of interprofessional point of care simulation on the safety culture of operating theatres. A validated Safety Attitude Questionnaire was administered to staff members before each simulation scenario and then re-administered to the same staff members after 6-12 months. Pre- and post-training Safety Attitude Questionnaire-Operating Room (SAQ-OR) scores were compared using paired sample t-tests. Analysis revealed a statistically significant perceived improvement in both safety (p < 0.001) and teamwork (p = 0.013) climate scores (components of safety culture) 6-12 months after interprofessional simulation training. A growing body of literature suggests that a positive safety culture is associated with improved patient outcomes. Our study supports the implementation of point of care simulation as a useful intervention to improve safety culture in theatres.

Occupational Safety and Health Professionals' Training in Italy: Qualitative Evaluation Using T-LAB

ERIC Educational Resources Information Center

Papaleo, Bruno; Cangiano, Giovanna; Calicchia, Sara

2013-01-01

Purpose: The purpose of this paper is to describe the evaluation of a training course on chemicals for occupational safety and health (OSH) professionals. The study aims were to assess the effectiveness of the course; to find out what type of training met these workers' needs best, as their role is vital in the management of safety at work; and to…

Varied Practice in Laparoscopy Training: Beneficial Learning Stimulation or Cognitive Overload?

PubMed

Spruit, Edward N; Kleijweg, Luca; Band, Guido P H; Hamming, Jaap F

2016-01-01

Determining the optimal design for surgical skills training is an ongoing research endeavor. In education literature, varied practice is listed as a positive intervention to improve acquisition of knowledge and motor skills. In the current study we tested the effectiveness of a varied practice intervention during laparoscopy training. Twenty-four trainees (control group) without prior experience received a 3 weeks laparoscopic skills training utilizing four basic and one advanced training task. Twenty-eight trainees (experimental group) received the same training with a random training task schedule, more frequent task switching and inverted viewing conditions on the four basic training tasks, but not the advanced task. Results showed inferior performance of the experimental group on the four basic laparoscopy tasks during training, at the end of training and at a 2 months retention session. We assume the inverted viewing conditions have led to the deterioration of learning in the experimental group because no significant differences were found between groups on the only task that had not been practiced under inverted viewing conditions; the advanced laparoscopic task. Potential moderating effects of inter-task similarity, task complexity, and trainee characteristics are discussed.

Varied Practice in Laparoscopy Training: Beneficial Learning Stimulation or Cognitive Overload?

PubMed Central

Spruit, Edward N.; Kleijweg, Luca; Band, Guido P. H.; Hamming, Jaap F.

2016-01-01

Determining the optimal design for surgical skills training is an ongoing research endeavor. In education literature, varied practice is listed as a positive intervention to improve acquisition of knowledge and motor skills. In the current study we tested the effectiveness of a varied practice intervention during laparoscopy training. Twenty-four trainees (control group) without prior experience received a 3 weeks laparoscopic skills training utilizing four basic and one advanced training task. Twenty-eight trainees (experimental group) received the same training with a random training task schedule, more frequent task switching and inverted viewing conditions on the four basic training tasks, but not the advanced task. Results showed inferior performance of the experimental group on the four basic laparoscopy tasks during training, at the end of training and at a 2 months retention session. We assume the inverted viewing conditions have led to the deterioration of learning in the experimental group because no significant differences were found between groups on the only task that had not been practiced under inverted viewing conditions; the advanced laparoscopic task. Potential moderating effects of inter-task similarity, task complexity, and trainee characteristics are discussed. PMID:27242599

Parenting education for parents with intellectual disabilities: a review of outcome studies.

PubMed

Feldman, M A

1994-01-01

Parents with intellectual disabilities (i.e., IQ < 80; mental retardation) are overrepresented in child maltreatment cases and have a variety of parenting skill deficits. Their children are at risk for neglect, developmental delay, and behavioral disorders. This review of parenting education interventions for such parents identified 20 published studies with adequate outcome data. A total of 190 such parents (188 mothers, 2 fathers), with IQs ranging from 50 to 79 were involved. Parenting skills trained included basic child-care, safety, nutrition, problem solving, positive parent-child interactions, and child behavior management. The most common instructional approach was behavioral (e.g., task analysis, modeling, feedback, reinforcement). Overall, initial training, follow-up, and social validity results are encouraging. Generalization and child outcome data are weak. Further research is needed to (a) identify variables associated with responsiveness to intervention, and (b) develop and compare innovative programs that teach parents with cognitive disabilities the necessary generalized skills to demonstrate long-term beneficial effects on their children.

Occupational health crossing borders - part 1: concept, teaching methods, and user evaluation of the first international summer school in Munich, Germany.

PubMed

Radon, Katja; Ehrenstein, Vera; Bigaignon-Cantineau, Janine; Vellore, Arun Dev; Fingerhut, Marilyn; Nowak, Dennis

2009-10-01

Occupational health and safety (OHS) is relevant for occupational health professionals (OHP) throughout the world. However, training opportunities are often limited and exchange between OHP from industrialized and developing countries is sparse. We aimed to contribute to the international exchange of OHP through a 2-week summer school program. Twenty-three OHP from 11 countries participated. Teaching methods included interactive lectures, participants' presentations, case-based e-learning, enterprise visits, and hands-on sessions. After completion, participants evaluated the course. OHS systems of 18 different countries were presented using the same set of clinical cases as a starting point. Opportunities and challenges in the different OHS systems were considered. On median, participants rated the course as excellent and totally agreed that it will help them in their daily work. An international summer school teaching basic aspects of different OHS systems is a useful tool for training and exchange at the global level. Copyright 2009 Wiley-Liss, Inc.

The Effects of Basketball Basic Skills Training on Gross Motor Skills Development of Female Children

ERIC Educational Resources Information Center

Bayazit, Betul

2015-01-01

The purpose of this study was to investigate the effects of basketball basic skills training on gross motor skills development of female children in Turkey. For that purpose, 40 female children took part in the study voluntarily. Basketball basic skills test was used to improve the gross motor skills of the female children in the study. Also,…

The effects of Crew Resource Management (CRM) training on flight attendants' safety attitudes.

PubMed

Ford, Jane; Henderson, Robert; O'Hare, David

2014-02-01

A number of well-known incidents and accidents had led the aviation industry to introduce Crew Resource Management (CRM) training designed specifically for flight attendants, and joint (pilot and flight attendant) CRM training as a way to improve teamwork and communication. The development of these new CRM training programs during the 1990s highlighted the growing need for programs to be evaluated using research tools that had been validated for the flight attendant population. The FSAQ (Flight Safety Attitudes Questionnaire-Flight Attendants) was designed specifically to obtain safety attitude data from flight attendants working for an Asia-Pacific airline. Flight attendants volunteered to participate in a study before receiving CRM training (N=563) and again (N=526) after CRM training. Almost half (13) of the items from the 36-item FSAQ showed highly significant changes following CRM training. Years of experience, crew position, seniority, leadership roles, flight attendant crew size, and length of route flown were all predictive of safety attitudes. CRM training for flight attendants is a valuable tool for increasing positive teamwork behaviors between the flight attendant and pilot sub-groups. Joint training sessions, where flight attendants and pilots work together to find solutions to in-flight emergency scenarios, provide a particularly useful strategy in breaking down communication barriers between the two sub-groups. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

Perceptual learning of basic visual features remains task specific with Training-Plus-Exposure (TPE) training.

PubMed

Cong, Lin-Juan; Wang, Ru-Jie; Yu, Cong; Zhang, Jun-Yun

2016-01-01

Visual perceptual learning is known to be specific to the trained retinal location, feature, and task. However, location and feature specificity can be eliminated by double-training or TPE training protocols, in which observers receive additional exposure to the transfer location or feature dimension via an irrelevant task besides the primary learning task Here we tested whether these new training protocols could even make learning transfer across different tasks involving discrimination of basic visual features (e.g., orientation and contrast). Observers practiced a near-threshold orientation (or contrast) discrimination task. Following a TPE training protocol, they also received exposure to the transfer task via performing suprathreshold contrast (or orientation) discrimination in alternating blocks of trials in the same sessions. The results showed no evidence for significant learning transfer to the untrained near-threshold contrast (or orientation) discrimination task after discounting the pretest effects and the suprathreshold practice effects. These results thus do not support a hypothetical task-independent component in perceptual learning of basic visual features. They also set the boundary of the new training protocols in their capability to enable learning transfer.

Safety. A Guide for Industrial Cooperative Training Programs. Learning Activity Package. LAP 6.

ERIC Educational Resources Information Center

Duenk, Lester G.; Lear, George

This learning activity package, one of six intended for use in Industrial Cooperative Training Programs, is designed to provide students with information on several general safety topics which would apply in most employment situations. (The industrial cooperative training program provides industrial occupational training experience for high school…

75 FR 57503 - Application for Training Grant; Extension of the Office of Management and Budget's (OMB) Approval...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-21

... training, inform them of the importance and proper use of safety and health equipment, and train employers... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0029] Application for Training Grant; Extension of the Office of Management and Budget's (OMB) Approval of...

Doing It Old School: Peer-Led Occupational Safety Training in the U.S. Construction Industry

ERIC Educational Resources Information Center

Sinyai, Clayton; Stafford, Pete; Trahan, Chris

2013-01-01

Many labour organizations that sponsor occupational health and safety training champion "peer training," preferring instructors drawn from the shopfloor over academically credentialed experts. But peer training is hardly new: in the skilled trades, master craftsmen have instructed apprentices since the Middle Ages. Building on the…

Implementation of EPA's Worker Protection Standard training for agricultural laborers: an evaluation using North Carolina data.

PubMed Central

Arcury, T A; Quandt, S A; Austin, C K; Preisser, J; Cabrera, L F

1999-01-01

The US Environmental Protection Agency has promulgated a Worker Protection Standard which requires that farmworkers receive pesticide safety training. The implementation of these regulations has not been evaluated. Using data collected through personal interviews with 270 Hispanic farmworkers recruited from 35 labor sites in an eight-county area, the authors analyzed the extent to which farmworkers received pesticide safety training, characteristics of the training, and variations in knowledge and safety behavior. Approximately a third of the farmworkers reported having ever received information or training on pesticide safety, and 25.6% reported having received training in the year in which they were interviewed. Workers with H2A visas were significantly more likely to have received training than workers without these visas. The training received varied in location, duration, and language. Most included the use of a video, as well as verbal presentation, and most included printed materials. However, few workers knew the ways in which they could be exposed to pesticides or reported using any method to protect themselves from pesticide exposure. PMID:10590768

Food Safety: MedlinePlus Health Topic

MedlinePlus

... reached its expiration date. United States Department of Agriculture Start Here 4 Basic Steps to Food Safety ... Food Safety When Preparing Holiday Meals (Department of Agriculture, Food Safety and Inspection Service) - PDF Also in ...

Survey and analysis of the current state of residency training in medical-school-affiliated hospitals in China

PubMed Central

2014-01-01

Background Since the global standards for postgraduate medical education (PGME) were published in January 2003, they have gained worldwide attention. The current state of residency training programs in medical-school-affiliated hospitals throughout China was assessed in this study. Methods Based on the internationally recognized global standards for PGME, residents undergoing residency training at that time and the relevant residency training instructors and management personnel from 15 medical-school-affiliated hospitals throughout China were recruited and surveyed regarding the current state of residency training programs. A total of 938 questionnaire surveys were distributed between June 30, 2006 and July 30, 2006; of 892 surveys collected, 841 were valid. Results For six items, the total proportions of “basically meets standards” and “completely meets standards” were <70% for the basic standards. These items were identified in the fields of “training settings and educational resources”, “evaluation of training process”, and “trainees”. In all fields other than “continuous updates”, the average scores of the western regions were significantly lower than those of the eastern regions for both the basic and target standards. Specifically, the average scores for the basic standards on as many as 25 of the 38 items in the nine fields were significantly lower in the western regions. There were significant differences in the basic standards scores on 13 of the 38 items among trainees, instructors, and managers. Conclusions The residency training programs have achieved satisfactory outcomes in the hospitals affiliated with various medical schools in China. However, overall, the programs remain inadequate in certain areas. For the governments, organizations, and institutions responsible for PGME, such global standards for PGME are a very useful self-assessment tool and can help identify problems, promote reform, and ultimately standardize PGME. PMID:24885865

Basic science research and education: a priority for training and capacity building in developing countries.

PubMed

Deckelbaum, Richard J; Ntambi, James M; Wolgemuth, Debra J

2011-09-01

This article provides evidence that basic science research and education should be key priorities for global health training, capacity building, and practice. Currently, there are tremendous gaps between strong science education and research in developed countries (the North) as compared to developing countries (the South). In addition, science research and education appear as low priorities in many developing countries. The need to stress basic science research beyond the typical investment of infectious disease basic service and research laboratories in developing areas is significant in terms of the benefits, not only to education, but also for economic strengthening and development of human resources. There are some indications that appreciation of basic science research education and training is increasing, but this still needs to be applied more rigorously and strengthened systematically in developing countries. Copyright © 2011 Elsevier Inc. All rights reserved.

29 CFR 1949.1 - Policy regarding tuition fees.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OFFICE OF TRAINING AND EDUCATION, OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION OSHA Training... safety and health program. Individuals or organizations wishing to be considered for this exemption shall...

29 CFR 1949.1 - Policy regarding tuition fees.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OFFICE OF TRAINING AND EDUCATION, OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION OSHA Training... safety and health program. Individuals or organizations wishing to be considered for this exemption shall...

Medical physics in Europe following recommendations of the International Atomic Energy Agency.

PubMed

Casar, Bozidar; Lopes, Maria do Carmo; Drljević, Advan; Gershkevitsh, Eduard; Pesznyak, Csilla

2016-03-01

Medical physics is a health profession where principles of applied physics are mostly directed towards the application of ionizing radiation in medicine. The key role of the medical physics expert in safe and effective use of ionizing radiation in medicine was widely recognized in recent European reference documents like the European Union Council Directive 2013/59/EURATOM (2014), and European Commission Radiation Protection No. 174, European Guidelines on Medical Physics Expert (2014). Also the International Atomic Energy Agency (IAEA) has been outspoken in supporting and fostering the status of medical physics in radiation medicine through multiple initiatives as technical and cooperation projects and important documents like IAEA Human Health Series No. 25, Roles and Responsibilities, and Education and Training Requirements for Clinically Qualified Medical Physicists (2013) and the International Basic Safety Standards, General Safety Requirements Part 3 (2014). The significance of these documents and the recognition of the present insufficient fulfilment of the requirements and recommendations in many European countries have led the IAEA to organize in 2015 the Regional Meeting on Medical Physics in Europe, where major issues in medical physics in Europe were discussed. Most important outcomes of the meeting were the recommendations addressed to European member states and the survey on medical physics status in Europe conducted by the IAEA and European Federation of Organizations for Medical Physics. Published recommendations of IAEA Regional Meeting on Medical Physics in Europe shall be followed and enforced in all European states. Appropriate qualification framework including education, clinical specialization, certification and registration of medical physicists shall be established and international recommendation regarding staffing levels in the field of medical physics shall be fulfilled in particular. European states have clear legal and moral responsibility to effectively transpose Basic Safety Standards into national legislation in order to ensure high quality and safety in patient healthcare.

Medical physics in Europe following recommendations of the International Atomic Energy Agency

PubMed Central

Lopes, Maria do Carmo; Drljević, Advan; Gershkevitsh, Eduard; Pesznyak, Csilla

2016-01-01

Background Medical physics is a health profession where principles of applied physics are mostly directed towards the application of ionizing radiation in medicine. The key role of the medical physics expert in safe and effective use of ionizing radiation in medicine was widely recognized in recent European reference documents like the European Union Council Directive 2013/59/EURATOM (2014), and European Commission Radiation Protection No. 174, European Guidelines on Medical Physics Expert (2014). Also the International Atomic Energy Agency (IAEA) has been outspoken in supporting and fostering the status of medical physics in radiation medicine through multiple initiatives as technical and cooperation projects and important documents like IAEA Human Health Series No. 25, Roles and Responsibilities, and Education and Training Requirements for Clinically Qualified Medical Physicists (2013) and the International Basic Safety Standards, General Safety Requirements Part 3 (2014). The significance of these documents and the recognition of the present insufficient fulfilment of the requirements and recommendations in many European countries have led the IAEA to organize in 2015 the Regional Meeting on Medical Physics in Europe, where major issues in medical physics in Europe were discussed. Most important outcomes of the meeting were the recommendations addressed to European member states and the survey on medical physics status in Europe conducted by the IAEA and European Federation of Organizations for Medical Physics. Conclusions Published recommendations of IAEA Regional Meeting on Medical Physics in Europe shall be followed and enforced in all European states. Appropriate qualification framework including education, clinical specialization, certification and registration of medical physicists shall be established and international recommendation regarding staffing levels in the field of medical physics shall be fulfilled in particular. European states have clear legal and moral responsibility to effectively transpose Basic Safety Standards into national legislation in order to ensure high quality and safety in patient healthcare. PMID:27069451

A Guide to the Design of Occupational Safety and Health Training for Immigrant, Latino/a Dairy Workers.

PubMed

Menger, Lauren M; Rosecrance, John; Stallones, Lorann; Roman-Muniz, Ivette Noami

2016-01-01

Industrialized dairy production in the U.S. relies on an immigrant, primarily Latino/a, workforce to meet greater production demands. Given the high rates of injuries and illnesses on U.S. dairies, there is pressing need to develop culturally appropriate training to promote safe practices among immigrant, Latino/a dairy workers. To date, there have been few published research articles or guidelines specific to developing effective occupational safety and health (OSH) training for immigrant, Latino/a workers in the dairy industry. Literature relevant to safety training for immigrant workers in agriculture and other high-risk industries (e.g., construction) was examined to identify promising approaches. The aim of this paper is to provide a practical guide for researchers and practitioners involved in the design and implementation of effective OSH training programs for immigrant, Latino/a workers in the dairy industry. The search was restricted to peer-reviewed academic journals and guidelines published between 1980 and 2015 by universities or extension programs, written in English, and related to health and safety training among immigrant, Latino/a workers within agriculture and other high-risk industries. Relevant recommendations regarding effective training transfer were also included from literature in the field of industrial-organizational psychology. A total of 97 articles were identified, of which 65 met the inclusion criteria and made a unique and significant contribution. The review revealed a number of promising strategies for how to effectively tailor health and safety training for immigrant, Latino/a workers in the dairy industry grouped under five main themes: (1) understanding and involving workers; (2) training content and materials; (3) training methods; (4) maximizing worker engagement; and (5) program evaluation. The identification of best practices in the design and implementation of training programs for immigrant, Latino/a workers within agriculture and other high-risk industries can inform the development of more effective and sustainable health and safety training for immigrant, Latino/a dairy workers in the U.S. and other countries.

Evaluating Behavioral Skills Training with and without Simulated in Situ Training for Teaching Safety Skills to Children

ERIC Educational Resources Information Center

Miltenberger, Raymond; Gross, Amy; Knudson, Peter; Bosch, Amanda; Jostad, Candice; Breitwieser, Carrie Brower

2009-01-01

This study compared the effectiveness of behavioral skills training (BST) to BST plus simulated in situ training (SIT) for teaching safety skills to children to prevent gun play. The results were evaluated in a posttest only control group design. Following the first assessment, participants in both training groups and the control group who did not…

Fire Safety of Passenger Trains: A Review of U.S. and Foreign Approaches

DOT National Transportation Integrated Search

1993-12-01

could develop into potentially life-threatening events. Fire safety is an area of particular interest for both : conventional intercity and commuter trains, as well as new alternative high-speed train technologies. These : technologies include steel-...

10 CFR 34.79 - Records of training and certification.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.79 Records of training and... and receiving the oral and practical examinations; and (b) Records of annual refresher safety training...

10 CFR 34.79 - Records of training and certification.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.79 Records of training and... and receiving the oral and practical examinations; and (b) Records of annual refresher safety training...

10 CFR 34.79 - Records of training and certification.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.79 Records of training and... and receiving the oral and practical examinations; and (b) Records of annual refresher safety training...

10 CFR 34.79 - Records of training and certification.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.79 Records of training and... and receiving the oral and practical examinations; and (b) Records of annual refresher safety training...

[Simulation-based training and OR apprenticeship for medical students : A prospective, randomized, single-blind study of clinical skills].

PubMed

Ott, T; Schmidtmann, I; Limbach, T; Gottschling, P F; Buggenhagen, H; Kurz, S; Pestel, G

2016-11-01

Simulation-based training (SBT) has developed into an established method of medical training. Studies focusing on the education of medical students have used simulation as an evaluation tool for defined skills. A small number of studies provide evidence that SBT improves medical students' skills in the clinical setting. Moreover, they were strictly limited to a few areas, such as the diagnosis of heart murmurs or the correct application of cricoid pressure. Other studies could not prove adequate transferability from the skills gained in SBT to the patient site. Whether SBT has an effect on medical students' skills in anesthesiology in the clinical setting is controversial. To explore this issue, we designed a prospective, randomized, single-blind trial that was integrated into the undergraduate anesthesiology curriculum of our department during the second year of the clinical phase of medical school. This study intended to explore the effect of SBT on medical students within the mandatory undergraduate anesthesiology curriculum of our department in the operating room with respect to basic skills in anesthesiology. After obtaining ethical approval, the participating students of the third clinical semester were randomized into two groups: the SIM-OR group was trained by a 225 min long SBT in basic skills in anesthesiology before attending the operating room (OR) apprenticeship. The OR-SIM group was trained after the operating room apprenticeship by SBT. During SBT the students were trained in five clinical skills detailed below. Further, two clinical scenarios were simulated using a full-scale simulator. The students had to prepare the patient and perform induction of anesthesia, including bag-mask ventilation after induction in scenario 1 and rapid sequence induction in scenario 2. Using the five-point Likert scale, five defined skills were evaluated at defined time points during the study period. 1) application of the safety checklist, 2) application of basic patient monitoring, 3) establishment of intravenous access, 4) bag-and-mask ventilation, and 5) adjustment of ventilatory parameters after the patients' airways were secured. A cumulative score of 5 points was defined as the best and a cumulative score of 25 as the worst rating for a defined time point. The primary endpoint was the cumulative score after day 1 in the operating room apprenticeship and the difference in cumulative scores from days 1 to 4. Our hypothesis was that the SIM-OR group would achieve a better score after day 1 in the operating room apprenticeship and would gain a larger increase in score from day 1 to day 4 than the OR-SIM group. 73 students were allocated to the OR-SIM group and 70 students to the SIM-OR group. There was no significant difference between the two groups after day 1 of the operating room apprenticeship and no difference in increase of the cumulative score from day 1 to day 4 (median of cumulative score on day 1: 'SIM-OR' 11.2 points vs. 'OR-SIM' 14.6 points; p = 0.067; median of difference from day 1 to day 4: 'SIM-OR' -3.7 vs. 'OR-SIM' -6.4; p = 0.110). With the methods applied, this study could not prove that 225 min of SBT before the operating room apprenticeship increased the medical students' clinical skills as evaluated in the operating room. Secondary endpoints indicate that medical students have better clinical skills at the end of the entire curriculum when they have been trained through SBT before the operating room apprenticeship. However, the authors believe that simulator training has a positive impact on students' acquisition of procedural and patient safety skills, even if the methods applied in this study may not mirror this aspect sufficiently.

OCCUPATIONAL SAFETY AND HEALTH EDUCATION AND TRAINING FOR UNDERSERVED POPULATIONS

PubMed Central

O’CONNOR, TOM; FLYNN, MICHAEL; WEINSTOCK, DEBORAH; ZANONI, JOSEPH

2015-01-01

This article presents an analysis of the essential elements of effective occupational safety and health education and training programs targeting under-served communities. While not an exhaustive review of the literature on occupational safety and health training, the paper provides a guide for practitioners and researchers to the key factors they should consider in the design and implementation of training programs for underserved communities. It also addresses issues of evaluation of such programs, with specific emphasis on considerations for programs involving low-literacy and limited-English-speaking workers. PMID:25053607

Effect of a road safety training program on drivers' comparative optimism.

PubMed

Perrissol, Stéphane; Smeding, Annique; Laumond, Francis; Le Floch, Valérie

2011-01-01

Reducing comparative optimism regarding risk perceptions in traffic accidents has been proven to be particularly difficult (Delhomme, 2000). This is unfortunate because comparative optimism is assumed to impede preventive action. The present study tested whether a road safety training course could reduce drivers' comparative optimism in high control situations. Results show that the training course efficiently reduced comparative optimism in high control, but not in low control situations. Mechanisms underlying this finding and implications for the design of road safety training courses are discussed. Copyright © 2010 Elsevier Ltd. All rights reserved.

Occupational safety and health education and training for underserved populations.

PubMed

O'Connor, Tom; Flynn, Michael; Weinstock, Deborah; Zanoni, Joseph

2014-01-01

This article presents an analysis of the essential elements of effective occupational safety and health education and training programs targeting underserved communities. While not an exhaustive review of the literature on occupational safety and health training, the paper provides a guide for practitioners and researchers to the key factors they should consider in the design and implementation of training programs for underserved communities. It also addresses issues of evaluation of such programs, with specific emphasis on considerations for programs involving low-literacy and limited-English-speaking workers.

Countermeasures that work : a highway safety countermeasure guide for state highway safety offices

DOT National Transportation Integrated Search

2007-01-01

This guide is a basic reference to assist State Highway Safety Offices (SHSOs) in selecting : effective, science-based traffic safety countermeasures for major highway safety problem areas. : The guide describes major strategies and countermeasures t...

Countermeasures that work : a highway safety countermeasure guide for state highway safety offices

DOT National Transportation Integrated Search

2005-01-01

This guide is a basic reference to assist State Highway Safety Offices (SHSOs) in selecting effective, science-based traffic safety countermeasures for major highway safety problem areas. The guide: describes major strategies and countermeasures that...

Countermeasures that work : a highway safety countermeasure guide for state highway safety offices

DOT National Transportation Integrated Search

2009-01-01

This guide is a basic reference to assist State Highway Safety Offices (SHSOs) in selecting effective, science-based traffic safety countermeasures for major highway safety problem areas. The guide: describes major strategies and countermeasures that...

Countermeasures that work : a highway safety countermeasure guide for state highway safety offices

DOT National Transportation Integrated Search

2008-01-01

This guide is a basic reference to assist State Highway Safety Offices (SHSOs) in selecting effective, science-based traffic safety countermeasures for major highway safety problem areas. The guide: describes major strategies and countermeasures that...

Evaluating and Enhancing Driving Ability Among Teens with Autism Spectrum Disorder (ASD)

DTIC Science & Technology

2014-10-01

able to engage in the driving training, and none have experienced simulation adaptation syndrome. 15. SUBJECT TERMS Autism, Driving Safety , Driving...routine driving training (RT) required by the DMV, VRDS training + RT (VRDS-T) would lead to greater improvement in driving safety and less driving...improved driving safety above and beyond RT. We hypothesized that computer-generated feedback would be more palatable than human-generated feedback to

Creating an environment for patient safety and teamwork training in the operating theatre: A quasi-experimental study.

PubMed

Wallin, Carl-Johan; Kalman, Sigridur; Sandelin, Annika; Färnert, May-Lena; Dahlstrand, Ursula; Jylli, Leena

2015-03-01

Positive safety and a teamwork climate in the training environment may be a precursor for successful teamwork training. This pilot project aimed to implement and test whether a new interdisciplinary and team-based approach would result in a positive training climate in the operating theatre. A 3-day educational module for training the complete surgical team of specialist nursing students and residents in safe teamwork skills in an authentic operative theatre, named Co-Op, was implemented in a university hospital. Participants' (n=22) perceptions of the 'safety climate' and the 'teamwork climate', together with their 'readiness for inter-professional learning', were measured to examine if the Co-Op module produced a positive training environment compared with the perceptions of a control group (n=11) attending the conventional curriculum. The participants' perceptions of 'safety climate' and 'teamwork climate' and their 'readiness for inter-professional learning' scores were significantly higher following the Co-Op module compared with their perceptions following the conventional curriculum, and compared with the control group's perceptions following the conventional curriculum. The Co-Op module improved 'safety climate' and 'teamwork climate' in the operating theatre, which suggests that a deliberate and designed educational intervention can shape a learning environment as a model for the establishment of a safety culture.

Addressing Younger Workers' Needs: The Promoting U through Safety and Health (PUSH) Trial Outcomes.

PubMed

Rohlman, Diane S; Parish, Megan; Elliot, Diane L; Hanson, Ginger; Perrin, Nancy

2016-08-10

Most younger workers, less than 25 years old, receive no training in worker safety. We report the feasibility and outcomes of a randomized controlled trial of an electronically delivered safety and health curriculum for younger workers entitled, PUSH (Promoting U through Safety and Health). All younger workers (14-24 years old) hired for summer work at a large parks and recreation organization were invited to participate in an evaluation of an online training and randomized into an intervention or control condition. Baseline and end-of-summer online instruments assessed acceptability, knowledge, and self-reported attitudes and behaviors. One-hundred and forty participants (mean age 17.9 years) completed the study. The innovative training was feasible and acceptable to participants and the organization. Durable increases in safety and health knowledge were achieved by intervention workers (p < 0.001, effect size (Cohen's d) 0.4). However, self-reported safety and health attitudes did not improve with this one-time training. These results indicate the potential utility of online training for younger workers and underscore the limitations of a single training interaction to change behaviors. Interventions may need to be delivered over a longer period of time and/or include environmental components to effectively alter behavior.

Addressing Younger Workers’ Needs: The Promoting U through Safety and Health (PUSH) Trial Outcomes

PubMed Central

Rohlman, Diane S.; Parish, Megan; Elliot, Diane L.; Hanson, Ginger; Perrin, Nancy

2016-01-01

Most younger workers, less than 25 years old, receive no training in worker safety. We report the feasibility and outcomes of a randomized controlled trial of an electronically delivered safety and health curriculum for younger workers entitled, PUSH (Promoting U through Safety and Health). All younger workers (14–24 years old) hired for summer work at a large parks and recreation organization were invited to participate in an evaluation of an online training and randomized into an intervention or control condition. Baseline and end-of-summer online instruments assessed acceptability, knowledge, and self-reported attitudes and behaviors. One-hundred and forty participants (mean age 17.9 years) completed the study. The innovative training was feasible and acceptable to participants and the organization. Durable increases in safety and health knowledge were achieved by intervention workers (p < 0.001, effect size (Cohen’s d) 0.4). However, self-reported safety and health attitudes did not improve with this one-time training. These results indicate the potential utility of online training for younger workers and underscore the limitations of a single training interaction to change behaviors. Interventions may need to be delivered over a longer period of time and/or include environmental components to effectively alter behavior. PMID:27517968

77 FR 74784 - Safety Zone for Recovery Operations for East Jefferson Street Train Derailment, Mantua Creek...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-18

... 1625-AA00 Safety Zone for Recovery Operations for East Jefferson Street Train Derailment, Mantua Creek... establishing a safety zone one mile north and one mile south of the East Jefferson Street Railroad Bridge... materials into Mantua Creek and the surrounding air. This regulation is necessary to provide for the safety...

Training and Action for Patient Safety: Embedding Interprofessional Education for Patient Safety within an Improvement Methodology

ERIC Educational Resources Information Center

Slater, Beverley L.; Lawton, Rebecca; Armitage, Gerry; Bibby, John; Wright, John

2012-01-01

Introduction: Despite an explosion of interest in improving safety and reducing error in health care, one important aspect of patient safety that has received little attention is a systematic approach to education and training for the whole health care workforce. This article describes an evaluation of an innovative multiprofessional, team-based…

Machine Tool Technology. Automatic Screw Machine Troubleshooting & Set-Up Training Outlines [and] Basic Operator's Skills Set List.

ERIC Educational Resources Information Center

Anoka-Hennepin Technical Coll., Minneapolis, MN.

This set of two training outlines and one basic skills set list are designed for a machine tool technology program developed during a project to retrain defense industry workers at risk of job loss or dislocation because of conversion of the defense industry. The first troubleshooting training outline lists the categories of problems that develop…

30 CFR 48.26 - Experienced miner training.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR EDUCATION AND TRAINING... observed and explained. (2) Mandatory health and safety standards. The course shall include the mandatory health and safety standards pertinent to the tasks to be assigned. (3) Authority and responsibility of...

30 CFR 48.26 - Experienced miner training.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR EDUCATION AND TRAINING... observed and explained. (2) Mandatory health and safety standards. The course shall include the mandatory health and safety standards pertinent to the tasks to be assigned. (3) Authority and responsibility of...

49 CFR 236.923 - Task analysis and basic requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... classroom, simulator, computer-based, hands-on, or other formally structured training and testing, except... for Processor-Based Signal and Train Control Systems § 236.923 Task analysis and basic requirements...) Based on a formal task analysis, identify the installation, maintenance, repair, modification...

Workplace Basics: The Skills Employers Want.

ERIC Educational Resources Information Center

Carnevale, Anthony P.; And Others

1989-01-01

Identifies the basic skills needed by workers to function in today's high technology workplace. Examines ways of training employees in learning and communication skills, adaptability, personal management, group effectiveness, and organizational leadership. Describes the eight-step training approach used by Mazda Motor Manufacturing Corporation.…

Starting with the Business Basics.

ERIC Educational Resources Information Center

Hoffman, Carl

1999-01-01

A nonprofit community action agency, BusinesStart, provides business training and small loans to entrepreneurs in 18 rural counties in southwestern Virginia and northeastern Tennessee. The entrepreneurs, many with no previous business experience, cite the agency's basic business training as key to their success. (SV)

41 CFR 102-80.10 - What are the basic safety and environmental management policies for real property?

Code of Federal Regulations, 2014 CFR

2014-01-01

... 41 Public Contracts and Property Management 3 2014-01-01 2014-01-01 false What are the basic safety and environmental management policies for real property? 102-80.10 Section 102-80.10 Public Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL...

Virtual reality simulators and training in laparoscopic surgery.

PubMed

Yiannakopoulou, Eugenia; Nikiteas, Nikolaos; Perrea, Despina; Tsigris, Christos

2015-01-01

Virtual reality simulators provide basic skills training without supervision in a controlled environment, free of pressure of operating on patients. Skills obtained through virtual reality simulation training can be transferred on the operating room. However, relative evidence is limited with data available only for basic surgical skills and for laparoscopic cholecystectomy. No data exist on the effect of virtual reality simulation on performance on advanced surgical procedures. Evidence suggests that performance on virtual reality simulators reliably distinguishes experienced from novice surgeons Limited available data suggest that independent approach on virtual reality simulation training is not different from proctored approach. The effect of virtual reality simulators training on acquisition of basic surgical skills does not seem to be different from the effect the physical simulators. Limited data exist on the effect of virtual reality simulation training on the acquisition of visual spatial perception and stress coping skills. Undoubtedly, virtual reality simulation training provides an alternative means of improving performance in laparoscopic surgery. However, future research efforts should focus on the effect of virtual reality simulation on performance in the context of advanced surgical procedure, on standardization of training, on the possibility of synergistic effect of virtual reality simulation training combined with mental training, on personalized training. Copyright © 2014 Surgical Associates Ltd. Published by Elsevier Ltd. All rights reserved.

Workers' safety in the construction industry in the southern West Bank of Palestine.

PubMed

Al-Sari, M I; Al-Khatib, I A

2012-10-01

There are few data about safety in the construction industry in Palestine. The main aim of the study was to assess worker's experiences and perceptions of safety at construction sites in Hebron and Bethlehem governorates of the West Bank. A structured questionnaire was completed through direct interviews with 349 construction workers. Of the respondents, 34.6% had experienced work-related accidents, 13.0% and 65.6% indicated that their workplace did not have a first-aid kit or trained first-aid specialist respectively, 35.8% reported that their work sites did not have safety tools and 83.7% had not received safety training. Workers perceived that awareness and training were the most frequent factor affecting workers' safety, with the foreman position having the greatest impact on the workers' safety. Greater enforcement of the current Palestinian safety laws is needed.

Optimal Physical Training During Military Basic Training Period.

PubMed

Santtila, Matti; Pihlainen, Kai; Viskari, Jarmo; Kyröläinen, Heikki

2015-11-01

The goal for military basic training (BT) is to create a foundation for physical fitness and military skills of soldiers. Thereafter, more advanced military training can safely take place. Large differences in the initial physical performance of conscripts or recruits have led military units to develop more safe and effective training programs. The purpose of this review article was to describe the limiting factors of optimal physical training during the BT period. This review revealed that the high volume of low-intensity physical activity combined with endurance-type military training (like combat training, prolonged physical activity, and field shooting) during BT interferes with optimal development of maximal oxygen uptake and muscle strength of the soldiers. Therefore, more progressive, periodized, and individualized training programs are needed. In conclusion, optimal training programs lead to higher training responses and lower risks for injuries and overloading.

Management Training, Yes! Excellence?

ERIC Educational Resources Information Center

Davis, Gary E.

1990-01-01

Management training programs are a necessity for transportation supervisors. Basic and advanced training programs are available through associations for business officials and university fleet management training programs. (MLF)

Effect of a Manager Training and Certification Program on Food Safety and Hygiene in Food Service Operations

PubMed Central

Kassa, Hailu; Silverman, Gary S.; Baroudi, Karim

2010-01-01

Food safety is an important public health issue in the U.S. Eating at restaurants and other food service facilities increasingly has been associated with food borne disease outbreaks. Food safety training and certification of food mangers has been used as a method for reducing food safety violations at food service facilities. However, the literature is inconclusive about the effectiveness of such training programs for improving food safety and protecting consumer health. The purpose of this study was to examine the effect of food manger training on reducing food safety violations. We examined food inspection reports from the Toledo/Lucas County Health Department (Ohio) from March 2005 through February 2006 and compared food hygiene violations between food service facilities with certified and without certified food managers. We also examined the impact on food safety of a food service facility being part of a larger group of facilities. Restaurants with trained and certified food managers had significantly fewer critical food safety violations but more non-critical violations than restaurants without certified personnel. Institutional food service facilities had significantly fewer violations than restaurants, and the number of violations did not differ as a function of certification. Similarly, restaurants with many outlets had significantly fewer violations than restaurants with fewer outlets, and training was not associated with lower numbers of violations from restaurants with many outlets. The value of having certified personnel was only observed in independent restaurants and those with few branches. This information may be useful in indicating where food safety problems are most likely to occur. Furthermore, we recommend that those characteristics of institutional and chain restaurants that result in fewer violations should be identified in future research, and efforts made to apply this knowledge at the level of individual restaurants. PMID:20523880

Effect of a manager training and certification program on food safety and hygiene in food service operations.

PubMed

Kassa, Hailu; Silverman, Gary S; Baroudi, Karim

2010-05-06

Food safety is an important public health issue in the U.S. Eating at restaurants and other food service facilities increasingly has been associated with food borne disease outbreaks. Food safety training and certification of food mangers has been used as a method for reducing food safety violations at food service facilities. However, the literature is inconclusive about the effectiveness of such training programs for improving food safety and protecting consumer health. The purpose of this study was to examine the effect of food manger training on reducing food safety violations. We examined food inspection reports from the Toledo/Lucas County Health Department (Ohio) from March 2005 through February 2006 and compared food hygiene violations between food service facilities with certified and without certified food managers. We also examined the impact on food safety of a food service facility being part of a larger group of facilities.Restaurants with trained and certified food managers had significantly fewer critical food safety violations but more non-critical violations than restaurants without certified personnel. Institutional food service facilities had significantly fewer violations than restaurants, and the number of violations did not differ as a function of certification. Similarly, restaurants with many outlets had significantly fewer violations than restaurants with fewer outlets, and training was not associated with lower numbers of violations from restaurants with many outlets. The value of having certified personnel was only observed in independent restaurants and those with few branches. This information may be useful in indicating where food safety problems are most likely to occur. Furthermore, we recommend that those characteristics of institutional and chain restaurants that result in fewer violations should be identified in future research, and efforts made to apply this knowledge at the level of individual restaurants.

Dairy Tool Box Talks: A Comprehensive Worker Training in Dairy Farming

PubMed Central

Rovai, Maristela; Carroll, Heidi; Foos, Rebecca; Erickson, Tracey; Garcia, Alvaro

2016-01-01

Today’s dairies are growing rapidly, with increasing dependence on Latino immigrant workers. This requires new educational strategies for improving milk quality and introduction to state-of-the-art dairy farming practices. It also creates knowledge gaps pertaining to the health of animals and workers, mainly due to the lack of time and language barriers. Owners, managers, and herdsmen assign training duties to more experienced employees, which may not promote “best practices” and may perpetuate bad habits. A comprehensive and periodic training program administered by qualified personnel is currently needed and will enhance the sustainability of the dairy industry. Strategic management and employee satisfaction will be achieved through proper training in the employee’s language, typically Spanish. The training needs to address not only current industry standards but also social and cultural differences. An innovative training course was developed following the same structure used by the engineering and construction industries, giving farm workers basic understanding of animal care and handling, cow comfort, and personal safety. The “Dairy Tool Box Talks” program was conducted over a 10-week period with nine sessions according to farm’s various employee work shifts. Bulk milk bacterial counts and somatic cell counts were used to evaluate milk quality on the three dairy farms participating in the program. “Dairy Tool Box Talks” resulted in a general sense of employee satisfaction, significant learning outcomes, and enthusiasm about the topics covered. We conclude this article by highlighting the importance of educational programs aimed at improving overall cross-cultural training. PMID:27471726

77 FR 6411 - Training, Qualification, and Oversight for Safety-Related Railroad Employees

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-07

... equipment is in a service that constitutes a train movement under part 232 of this chapter; [and] (6... Administration 49 CFR Parts 214, 232, and 243 Training, Qualification, and Oversight for Safety-Related Railroad..., 232, and 243 [Docket No. FRA-2009-0033, Notice No. 1] RIN 2130-AC06 Training, Qualification, and...

29 CFR 1926.1430 - Training.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 8 2011-07-01 2011-07-01 false Training. 1926.1430 Section 1926.1430 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Cranes and Derricks in Construction § 1926.1430 Training...

20 CFR 638.803 - Safety.

Code of Federal Regulations, 2010 CFR

2010-04-01

...' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR JOB CORPS PROGRAM UNDER TITLE IV-B OF THE JOB TRAINING PARTNERSHIP ACT Administrative Provisions § 638.803 Safety. (a) The Job Corps... unsanitary, hazardous, or lack proper ventilation. Whenever students are employed or trained for jobs, they...

Individuals with severely impaired vision can learn useful orientation and mobility skills in virtual streets and can use them to improve real street safety

PubMed Central

Liu, Lei

2017-01-01

Virtual reality has great potential in training road safety skills to individuals with low vision but the feasibility of such training has not been demonstrated. We tested the hypotheses that low vision individuals could learn useful skills in virtual streets and could apply them to improve real street safety. Twelve participants, whose vision was too poor to use the pedestrian signals were taught by a certified orientation and mobility specialist to determine the safest time to cross the street using the visual and auditory signals made by the start of previously stopped cars at a traffic-light controlled street intersection. Four participants were trained in real streets and eight in virtual streets presented on 3 projection screens. The crossing timing of all participants was evaluated in real streets before and after training. The participants were instructed to say “GO” at the time when they felt the safest to cross the street. A safety score was derived to quantify the GO calls based on its occurrence in the pedestrian phase (when the pedestrian sign did not show DON’T WALK). Before training, > 50% of the GO calls from all participants fell in the DON’T WALK phase of the traffic cycle and thus were totally unsafe. 20% of the GO calls fell in the latter half of the pedestrian phase. These calls were unsafe because one initiated crossing this late might not have sufficient time to walk across the street. After training, 90% of the GO calls fell in the early half of the pedestrian phase. These calls were safer because one initiated crossing in the pedestrian phase and had at least half of the pedestrian phase for walking across. Similar safety changes occurred in both virtual street and real street trained participants. An ANOVA showed a significant increase of the safety scores after training and there was no difference in this safety improvement between the virtual street and real street trained participants. This study demonstrated that virtual reality-based orientation and mobility training could be as efficient as real street training in improving street safety in individuals with severely impaired vision. PMID:28445540

Countermeasures that work : a highway safety countermeasure guide for state highway safety offices, fifth edition, 2010.

DOT National Transportation Integrated Search

2010-01-01

This guide is a basic reference to assist State Highway Safety Offices (SHSOs) in selecting : effective, science-based traffic safety countermeasures for major highway safety problem areas. : The guide: : o describes major strategies and countermeasu...

The carrier safety measurement system (CSMS) effectiveness test by behavior analysis and safety improvement categories (BASICs)

DOT National Transportation Integrated Search

2014-01-24

The Carrier Safety Measurement System (CSMS) is the Federal Motor Carrier Safety Administrations (FMCSA's) workload prioritization tool. This tool is used to identify carriers with potential safety issues so that they are subject to interventions ...

Stress management training for military trainees returned to duty after a mental health evaluation: effect on graduation rates.

PubMed

Cigrang, J A; Todd, S L; Carbone, E G

2000-01-01

A significant proportion of people entering the military are discharged within the first 6 months of enlistment. Mental health related problems are often cited as the cause of discharge. This study evaluated the utility of stress inoculation training in helping reduce the attrition of a sample of Air Force trainees at risk for discharge from basic military training. Participants were 178 trainees referred for a psychological evaluation from basic training. Participants were randomly assigned to a 2-session stress management group or a usual-care control condition. Compared with past studies that used less rigorous methodology, this study did not find that exposure to stress management information increased the probability of graduating basic military training. Results are discussed in terms of possible reasons for the lack of treatment effects and directions for future research.

International expert statement on training standards for critical care ultrasonography.

PubMed

2011-07-01

Training in ultrasound techniques for intensive care medicine physicians should aim at achieving competencies in three main areas: (1) general critical care ultrasound (GCCUS), (2) "basic" critical care echocardiography (CCE), and (3) advanced CCE. A group of 29 experts representing the European Society of Intensive Care Medicine (ESICM) and 11 other critical care societies worldwide worked on a potential framework for organizing training adapted to each area of competence. This framework is mainly aimed at defining minimal requirements but is by no means rigid or restrictive: each training organization can be adapted according to resources available. There was 100% agreement among the participants that general critical care ultrasound and "basic" critical care echocardiography should be mandatory in the curriculum of intensive care unit (ICU) physicians. It is the role of each critical care society to support the implementation of training in GCCUS and basic CCE in its own country.

Commuter Train Passenger Safety Model Using Positive Behavior Approach: The Case Study in Suburban Area

NASA Astrophysics Data System (ADS)

Suryanto, D. A.; Adisasmita, S. A.; Hamid, S.; Hustim, M.

2018-04-01

Currently, Train passanger safety measures are more predominantly measurable using negative dimensions in user mode behavior, such as accident rate, accident intensity and accident impact. This condition suggests that safety improvements aim only to reduce accidents. Therefore, this study aims to measure the safety level of light train transit modes (KRL) through the dimensions of traveling safety on commuters based on positive safety indicators with severel condition departure times and returns for work purposes and long trip rates above KRL. The primary survey were used in data collection methods. Structural Equation Modeling (SEM) were used in data analysis. The results show that there are different models of the safety level of departure and return journey. The highest difference is in the security dimension which is the internal variable of KRL users.

75 FR 41531 - Brookwood-Sago Mine Safety Grants

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-16

... stated goals and current reporting period. objectives for improving safety. Conduct and report pre-test and post- test results of trainees. Course evaluations of trainer and training materials. The extent... pre-test and post- and improves safety. educational materials test results of the training materials...

30 CFR 48.6 - Experienced miner training.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR EDUCATION AND TRAINING... utilized at the mine shall be observed and explained. (2) Mandatory health and safety standards. The course shall include the mandatory health and safety standards pertinent to the tasks to be assigned. (3...

30 CFR 48.6 - Experienced miner training.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR EDUCATION AND TRAINING... utilized at the mine shall be observed and explained. (2) Mandatory health and safety standards. The course shall include the mandatory health and safety standards pertinent to the tasks to be assigned. (3...

49 CFR 214.337 - On-track safety procedures for lone workers.

Code of Federal Regulations, 2013 CFR

2013-10-01

... RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD WORKPLACE SAFETY Roadway Worker Protection... performing routine inspection or minor correction may use individual train detection to establish on-track... worker retains an absolute right to use on-track safety procedures other than individual train detection...

49 CFR 214.337 - On-track safety procedures for lone workers.

Code of Federal Regulations, 2012 CFR

2012-10-01

... RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD WORKPLACE SAFETY Roadway Worker Protection... performing routine inspection or minor correction may use individual train detection to establish on-track... worker retains an absolute right to use on-track safety procedures other than individual train detection...

49 CFR 214.337 - On-track safety procedures for lone workers.

Code of Federal Regulations, 2014 CFR

2014-10-01

... RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD WORKPLACE SAFETY Roadway Worker Protection... performing routine inspection or minor correction may use individual train detection to establish on-track... worker retains an absolute right to use on-track safety procedures other than individual train detection...

49 CFR 214.337 - On-track safety procedures for lone workers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD WORKPLACE SAFETY Roadway Worker Protection... performing routine inspection or minor correction may use individual train detection to establish on-track... worker retains an absolute right to use on-track safety procedures other than individual train detection...

Foremen's intervention to prevent falls and increase safety communication at residential construction sites.

PubMed

Kaskutas, Vicki; Buckner-Petty, Skye; Dale, Ann Marie; Gaal, John; Evanoff, Bradley A

2016-10-01

This research aimed to improve residential construction foremen's communication skills and safety behaviors of their crewmembers when working at heights. Eighty-four residential construction foremen participated in the 8-hr fall prevention and safety communication training. We compared pre- and post-intervention surveys from foremen and their crewmembers to measure the effect of training. Foremen and crewmembers' ratings showed improvements in fall prevention knowledge, behaviors, and safety communication and were sustained 6-months post-training, with emphasized areas demonstrating larger increases. Ratings were similar between foremen and crewmembers, suggesting that the foremen effectively taught their crew and assigned accurate ratings. Based upon associations between safety behaviors and reported falls observed in prior research, we would expect a 16.6% decrease in the one year cumulative incidence of self-reported falls post-intervention. This intervention improved safety knowledge and behaviors of a large number of workers by training construction foremen in fall prevention and safety communication skills. Am. J. Ind. Med. 59:823-831, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

[Should medical schools train students in human rights? An exploratory study among medical students in 46 countries].

PubMed

Kabengele Mpinga, E; Meier, S; Zesiger, V; Chastonay, P

2006-06-07

The interest of medical students from 46 countries for human rights issues and training was investigated in a cross sectional study. Training in human rights is demanded by 85,4% of respondents. Nearly 55% consider that such training should be compulsory. Nearly 85% of students consider as specific tasks of a medical practitioner "to prevent actively professional practices that violate basic human rights in the health systems" or "to develop and promote attitudes respectful of human rights in care". Our study suggests that human rights training could be integrated into basic medical curriculum.

Preparedness of fire safety in underground train station: Comparison between train operators in Malaysia with other operators from the developed countries

NASA Astrophysics Data System (ADS)

Tajedi, Noor Aqilah A.; Sukor, Nur Sabahiah A.; Ismail, Mohd Ashraf M.; Shamsudin, Shahrul A.

2017-10-01

The purpose of this paper is to compare the fire evacuation plan and preparation at the underground train stations in the different countries. The methodology for this study was using the extended questionnaire survey to investigate the Rapid Rail Sdn Bhd, Malaysia's fire safety plan and preparation at the underground train stations. There were four sections in the questionnaire which included (i) background of the respondents, (ii) the details on the train stations, safety instruction and fire evacuation exercises (iii) technical systems, installation and equipment at the underground stations and (iv) procedures and technical changes related to fire safety that had been applied by the operators. Previously, the respondents from the different train operator services in the developed countries had completed the questionnaires. This paper extends the response from the Rapid Rail Sdn Bhd to compare the emergency procedures and preparation for fire event with the developed countries. As a result, this study found that the equipment and facilities that provided at the underground train stations that operated by Rapid Rail are relevant for fire safety procedures and needs. The main advantage for Rapid Rail is the underground stations were designed with two or more entrances/exits that may perform better evacuation compare to one main entrance/exit train stations in the other developed countries.

Evaluating the Effectiveness of Traditional Training Methods in Non-Traditional Training Programs for Adult Learners through a Pre-Test/Post-Test Comparison of Food Safety Knowledge

ERIC Educational Resources Information Center

Dodd, Caleb D.; Burris, Scott; Fraze, Steve; Doerfert, David; McCulloch, Abigail

2013-01-01

The incorporation of hot and cold food bars into grocery stores in an effort to capture a portion of the home meal replacement industry is presenting new challenges for retail food establishments. To ensure retail success and customer safety, employees need to be educated in food safety practices. Traditional methods of training are not meeting…

Novel approaches to development, delivery and evaluation of a peer-led occupational safety training for Latino day laborers.

PubMed

De Souza, Rachael Ann; Hecker, Steven; de Castro, A B; Stern, Hilary; Hernandez, Araceli; Seixas, Noah

2012-01-01

Latino day laborers experience high rates of work-related injuries and are a hard-to-reach group for safety interventions. This study describes the creation and implementation of safety training based in empowerment theory and its evaluation to address three levels in empowerment's hierarchy of change. Pictographic pre- and post-tests were used to assess knowledge level changes. Individual and large-group interviews were conducted to address attitudes and behavior-level changes. Results indicate that day laborers learn and apply lessons from this type of safety training. Findings also offer insight into challenges that day laborers encounter when trying to work safely as well as ideas for future training interventions.

Developing effective health and safety training materials for workers in beryllium-using industries.

PubMed

Mayer, A S; Brazile, W J; Erb, S A; Barker, E A; Miller, C M; Mroz, M M; Maier, L A; Van Dyke, M V

2013-07-01

Despite reduced workplace exposures, beryllium sensitization and chronic beryllium disease still occur. Effective health and safety training is needed. Through an Occupational Safety and Health Administration (OSHA) Targeted Topic Training grant and company partners, we developed a training program. Evaluation and validation included knowledge and training reaction assessments and training impact survey. We describe herein the iterative, five-pronged approach: (1) needs assessment; (2) materials development; (3) pilot-testing, evaluation, and material revisions; (4) worker training; and (5) evaluation and validation. Mean posttraining test score increased 14% (82% to 96%; P < 0.005) and were unchanged at 90-day follow-up (94%; P = 0.744). In addition, 49% reported making changes in work practices. The use of a five-pronged training program was effective and well received and resulted in improved work practices. These materials are available on the OSHA Web site.

10 CFR 34.43 - Training.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Training. 34.43 Section 34.43 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Radiation Safety Requirements § 34.43 Training. (a) The licensee may not permit any individual to...

10 CFR 34.43 - Training.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 1 2012-01-01 2012-01-01 false Training. 34.43 Section 34.43 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Radiation Safety Requirements § 34.43 Training. (a) The licensee may not permit any individual to...

10 CFR 34.43 - Training.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false Training. 34.43 Section 34.43 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Radiation Safety Requirements § 34.43 Training. (a) The licensee may not permit any individual to...

10 CFR 34.43 - Training.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 1 2014-01-01 2014-01-01 false Training. 34.43 Section 34.43 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Radiation Safety Requirements § 34.43 Training. (a) The licensee may not permit any individual to...

10 CFR 34.43 - Training.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Training. 34.43 Section 34.43 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Radiation Safety Requirements § 34.43 Training. (a) The licensee may not permit any individual to...

77 FR 29445 - Agency Information Collection Activities; Extension of a Currently Approved Collection; Training...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-17

... model curriculum (``Truck Safety: Information on Driver Training,'' Report of the U.S. General... DEPARTMENT OF TRANSPORTATION Federal Motor Carrier Safety Administration [Docket No. FMCSA-2012-0129] Agency Information Collection Activities; Extension of a Currently Approved Collection; Training...

Knowledge, attitudes and practices of food handlers in food safety: An integrative review.

PubMed

Zanin, Laís Mariano; da Cunha, Diogo Thimoteo; de Rosso, Veridiana Vera; Capriles, Vanessa Dias; Stedefeldt, Elke

2017-10-01

This study presents an overview of the relationship between knowledge, attitudes and practices (KAP) of food handlers with training in food safety, in addition to proposing reflections on the training of food handlers, considering its responsibility for food safety and health of consumers. The review was based on the integrative method. The descriptors used were: (food handler), (knowledge, attitudes and practice) and (training). Six databases were searched, 253 articles were consulted and 36 original articles were included. Fifty per cent of the articles pointed that there was no proper translation of knowledge into attitudes/practices or attitudes into practices after training. Knowledge, attitudes and practices of food handlers are important for identifying how efficient training in food safety is allowing prioritize actions in planning training. The evaluation of KAP is the first step to understand the food handler's point of view. After this evaluation other diagnostic strategies become necessary to enhance this understanding. Copyright © 2017. Published by Elsevier Ltd.

2011 Annual Criticality Safety Program Performance Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrea Hoffman

The 2011 review of the INL Criticality Safety Program has determined that the program is robust and effective. The review was prepared for, and fulfills Contract Data Requirements List (CDRL) item H.20, 'Annual Criticality Safety Program performance summary that includes the status of assessments, issues, corrective actions, infractions, requirements management, training, and programmatic support.' This performance summary addresses the status of these important elements of the INL Criticality Safety Program. Assessments - Assessments in 2011 were planned and scheduled. The scheduled assessments included a Criticality Safety Program Effectiveness Review, Criticality Control Area Inspections, a Protection of Controlled Unclassified Information Inspection,more » an Assessment of Criticality Safety SQA, and this management assessment of the Criticality Safety Program. All of the assessments were completed with the exception of the 'Effectiveness Review' for SSPSF, which was delayed due to emerging work. Although minor issues were identified in the assessments, no issues or combination of issues indicated that the INL Criticality Safety Program was ineffective. The identification of issues demonstrates the importance of an assessment program to the overall health and effectiveness of the INL Criticality Safety Program. Issues and Corrective Actions - There are relatively few criticality safety related issues in the Laboratory ICAMS system. Most were identified by Criticality Safety Program assessments. No issues indicate ineffectiveness in the INL Criticality Safety Program. All of the issues are being worked and there are no imminent criticality concerns. Infractions - There was one criticality safety related violation in 2011. On January 18, 2011, it was discovered that a fuel plate bundle in the Nuclear Materials Inspection and Storage (NMIS) facility exceeded the fissionable mass limit, resulting in a technical safety requirement (TSR) violation. The TSR limits fuel plate bundles to 1085 grams U-235, which is the maximum loading of an ATR fuel element. The overloaded fuel plate bundle contained 1097 grams U-235 and was assembled under an 1100 gram U-235 limit in 1982. In 2003, the limit was reduced to 1085 grams citing a new criticality safety evaluation for ATR fuel elements. The fuel plate bundle inventories were not checked for compliance prior to implementing the reduced limit. A subsequent review of the NMIS inventory did not identify further violations. Requirements Management - The INL Criticality Safety program is organized and well documented. The source requirements for the INL Criticality Safety Program are from 10 CFR 830.204, DOE Order 420.1B, Chapter III, 'Nuclear Criticality Safety,' ANSI/ANS 8-series Industry Standards, and DOE Standards. These source requirements are documented in LRD-18001, 'INL Criticality Safety Program Requirements Manual.' The majority of the criticality safety source requirements are contained in DOE Order 420.1B because it invokes all of the ANSI/ANS 8-Series Standards. DOE Order 420.1B also invokes several DOE Standards, including DOE-STD-3007, 'Guidelines for Preparing Criticality Safety Evaluations at Department of Energy Non-Reactor Nuclear Facilities.' DOE Order 420.1B contains requirements for DOE 'Heads of Field Elements' to approve the criticality safety program and specific elements of the program, namely, the qualification of criticality staff and the method for preparing criticality safety evaluations. This was accomplished by the approval of SAR-400, 'INL Standardized Nuclear Safety Basis Manual,' Chapter 6, 'Prevention of Inadvertent Criticality.' Chapter 6 of SAR-400 contains sufficient detail and/or reference to the specific DOE and contractor documents that adequately describe the INL Criticality Safety Program per the elements specified in DOE Order 420.1B. The Safety Evaluation Report for SAR-400 specifically recognizes that the approval of SAR-400 approves the INL Criticality Safety Program. No new source requirements were released in 2011. A revision to LRD-18001 is planned for 2012 to clarify design requirements for criticality alarms. Training - Criticality Safety Engineering has developed training and provides training for many employee positions, including fissionable material handlers, facility managers, criticality safety officers, firefighters, and criticality safety engineers. Criticality safety training at the INL is a program strength. A revision to the training module developed in 2010 to supplement MFC certified fissionable material handlers (operators) training was prepared and presented in August of 2011. This training, 'Applied Science of Criticality Safety,' builds upon existing training and gives operators a better understanding of how their criticality controls are derived. Improvements to 00INL189, 'INL Criticality Safety Principles' are planned for 2012 to strengthen fissionable material handler training.« less

Patient safety education at Japanese medical schools: results of a nationwide survey.

PubMed

Maeda, Shoichi; Kamishiraki, Etsuko; Starkey, Jay

2012-05-10

Patient safety education, including error prevention strategies and management of adverse events, has become a topic of worldwide concern. The importance of the patient safety is also recognized in Japan following two serious medical accidents in 1999. Furthermore, educational curriculum guideline revisions in 2008 by relevant the Ministry of Education includes patient safety as part of the core medical curriculum. However, little is known about the patient safety education in Japanese medical schools partly because a comprehensive study has not yet been conducted in this field. Therefore, we have conducted a nationwide survey in order to clarify the current status of patient safety education at medical schools in Japan. Response rate was 60.0% (n = 48/80). Ninety-eight-percent of respondents (n = 47/48) reported integration of patient safety education into their curricula. Thirty-nine percent reported devoting less than five hours to the topic. All schools that teach patient safety reported use of lecture based teaching methods while few used alternative methods, such as role-playing or in-hospital training. Topics related to medical error theory and legal ramifications of error are widely taught while practical topics related to error analysis such as root cause analysis are less often covered. Based on responses to our survey, most Japanese medical schools have incorporated the topic of patient safety into their curricula. However, the number of hours devoted to the patient safety education is far from the sufficient level with forty percent of medical schools that devote five hours or less to it. In addition, most medical schools employ only the lecture based learning, lacking diversity in teaching methods. Although most medical schools cover basic error theory, error analysis is taught at fewer schools. We still need to make improvements to our medical safety curricula. We believe that this study has the implications for the rest of the world as a model of what is possible and a sounding board for what topics might be important.

Twelve tips for postgraduate or undergraduate medics building a basic microsurgery simulation training course.

PubMed

Mason, Katrina A; Theodorakopoulou, Evgenia; Pafitanis, Georgios; Ghanem, Ali M; Myers, Simon R

2016-09-01

Microsurgery is used in a variety of surgical specialties, including Plastic Surgery, Maxillofacial Surgery, Ophthalmic Surgery, Otolaryngology and Neurosurgery. It is considered one of the most technically challenging fields of surgery. Microsurgical skills demand fine, precise and controlled movements, and microsurgical skill acquisition has a steep initial learning curve. Microsurgical simulation provides a safe environment for skill acquisition before operating clinically. The traditional starting point for anyone wanting to pursue microsurgery is a basic simulation training course. We present twelve tips for postgraduate and undergraduate medics on how to set up and run a basic ex-vivo microsurgery simulation training course suitable for their peers.

78 FR 32691 - Proposed Collection; Comment Request; Certificate of Electrical Training

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-31

... DEPARTMENT OF LABOR Mine Safety and Health Administration Proposed Collection; Comment Request; Certificate of Electrical Training AGENCY: Mine Safety and Health Administration, Labor. ACTION: 60-Day Notice... clearly identified with ``OMB 1219-0001'' and sent to the Mine Safety and Health Administration (MSHA...

40 CFR 170.230 - Pesticide safety training for handlers.

Code of Federal Regulations, 2014 CFR

2014-07-01

... about human health hazards. (ii) Hazards of pesticides resulting from toxicity and exposure, including... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Pesticide safety training for handlers...) PESTICIDE PROGRAMS WORKER PROTECTION STANDARD Standard for Pesticide Handlers § 170.230 Pesticide safety...

40 CFR 170.230 - Pesticide safety training for handlers.

Code of Federal Regulations, 2011 CFR

2011-07-01

... about human health hazards. (ii) Hazards of pesticides resulting from toxicity and exposure, including... 40 Protection of Environment 24 2011-07-01 2011-07-01 false Pesticide safety training for handlers...) PESTICIDE PROGRAMS WORKER PROTECTION STANDARD Standard for Pesticide Handlers § 170.230 Pesticide safety...

40 CFR 170.230 - Pesticide safety training for handlers.

Code of Federal Regulations, 2012 CFR

2012-07-01

... about human health hazards. (ii) Hazards of pesticides resulting from toxicity and exposure, including... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Pesticide safety training for handlers...) PESTICIDE PROGRAMS WORKER PROTECTION STANDARD Standard for Pesticide Handlers § 170.230 Pesticide safety...

40 CFR 170.230 - Pesticide safety training for handlers.

Code of Federal Regulations, 2010 CFR

2010-07-01

... about human health hazards. (ii) Hazards of pesticides resulting from toxicity and exposure, including... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Pesticide safety training for handlers...) PESTICIDE PROGRAMS WORKER PROTECTION STANDARD Standard for Pesticide Handlers § 170.230 Pesticide safety...

40 CFR 170.230 - Pesticide safety training for handlers.

Code of Federal Regulations, 2013 CFR

2013-07-01

... about human health hazards. (ii) Hazards of pesticides resulting from toxicity and exposure, including... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Pesticide safety training for handlers...) PESTICIDE PROGRAMS WORKER PROTECTION STANDARD Standard for Pesticide Handlers § 170.230 Pesticide safety...

Development of Quasi-3DOF upper limb rehabilitation system using ER brake: PLEMO-P1

NASA Astrophysics Data System (ADS)

Kikuchi, T.; Fukushima, K.; Furusho, J.; Ozawa, T.

2009-02-01

In recent years, many researchers have studied the potential of using robotics technology to assist and quantify the motor functions for neuron-rehabilitation. Some kinds of haptic devices have been developed and evaluated its efficiency with clinical tests, for example, upper limb training for patients with spasticity after stroke. However, almost all the devices are active-type (motor-driven) haptic devices and they basically require high-cost safety system compared to passive-type (brake-based) devices. In this study, we developed a new practical haptic device 'PLEMO-P1'; this system adopted ER brakes as its force generators. In this paper, the mechanism of PLEMO-P1 and its software for a reaching rehabilitation are described.

Teaching home safety and survival skills to latch-key children: a comparison of two manuals and methods.

PubMed Central

Peterson, L

1984-01-01

I evaluated the influence of two training manuals on latch-key children's acquisition of home safety and survival skills. The widely used, discussion-oriented "Prepared for Today" manual was compared with a behaviorally oriented "Safe at Home" manual. Data were scored by response criteria developed by experts and by parents' and experts' ratings of children's spontaneous answers. With both methods of scoring, three behaviorally trained children demonstrated clear and abrupt increases in skill following training in each of seven trained modules, and these increases largely persisted in real world generalization probes and at 5-month follow-up. Smaller and less stable increases in skill were found in the three discussion-trained children across the seven modules; lower skill levels were also seen in real world generalization probes and at follow-up. Neither group of children demonstrated skill increases in home safety areas that were not explicitly trained. Both training methods produced small decreases in children's self-report of general anxiety and anxiety concerning home safety. Results are discussed in terms of their implications for cost-effective training of latch-key children. PMID:6511698

Validation of a novel basic virtual reality simulator, the LAP-X, for training basic laparoscopic skills.

PubMed

Kawaguchi, Koji; Egi, Hiroyuki; Hattori, Minoru; Sawada, Hiroyuki; Suzuki, Takahisa; Ohdan, Hideki

2014-10-01

Virtual reality surgical simulators are becoming popular as a means of providing trainees with an opportunity to practice laparoscopic skills. The Lap-X (Epona Medical, Rotterdam, the Netherlands) is a novel VR simulator for training basic skills in laparoscopic surgery. The objective of this study was to validate the LAP-X laparoscopic virtual reality simulator by assessing the face and construct validity in order to determine whether the simulator is adequate for basic skills training. The face and content validity were evaluated using a structured questionnaire. To assess the construct validity, the participants, nine expert surgeons (median age: 40 (32-45)) (>100 laparoscopic procedures) and 11 novices performed three basic laparoscopic tasks using the Lap-X. The participants reported a high level of content validity. No significant differences were found between the expert surgeons and the novices (Ps > 0.246). The performance of the expert surgeons on the three tasks was significantly better than that of the novices in all parameters (Ps < 0.05). This study demonstrated the face, content and construct validity of the Lap-X. The Lap-X holds real potential as a home and hospital training device.

TRAINING IN INDUSTRY--THE MANAGEMENT OF LEARNING.

ERIC Educational Resources Information Center

BASS, BERNARD M.; VAUGHAN, JAMES A.

THE PRINCIPLES OF LEARNING BEHAVIOR DERIVED THROUGH LABORATORY STUDY CAN BE EXTENDED TO EXPLAIN MUCH OF THE COMPLEX LEARNING REQUIRED IN INDUSTRIAL TRAINING PROGRAMS. A REVIEW OF THE BASIC PRINCIPLES OF HUMAN LEARNING INTRODUCES FOUR BASIC CONCEPTS--DRIVE, STIMULUS, RESPONSE, AND REINFORCER--AND DISCUSSES CLASSICAL AND INSTRUMENTAL CONDITIONING…

Adult Basic Skills Instructor Training and Experiential Learning Theory.

ERIC Educational Resources Information Center

Marlowe, Mike; And Others

1991-01-01

Competency-based training workshops based on Kolb's experiential learning theory were held for North Carolina adult basic education teachers; 251 attended 1-day sessions and 91 a week-long summer institute. Topics included interpersonal communication, reading, numeracy, language arts, math, assessment, and program evaluation. (SK)