Voices of Informal Caregivers and Community Stakeholders: Whether and How to Develop an Informal Caregiver Training Program

PubMed Central

Phillips, Sara S.; Ragas, Daiva M.; Tom, Laura S.; Hajjar, Nadia; Dong, XinQi; Simon, Melissa A.

2015-01-01

Our primary objective was to gather pilot data from caregivers and stakeholders to guide the development of a training program to assist informal caregivers in re-entering the job market. The goal of the program would be to help caregivers rebound from their incurred economic burden by transitioning into a paid caregiving or other health-service role. The economic burden they bear often necessitates a return to the workforce following caregiving; yet the act of returning is complicated by an extended absence from the workforce and a lack of experience in other verifiably skilled and paid roles. We interviewed 37 stakeholders and 25 caregivers of a chronically or terminally ill family member or friend in a suburban collar county close to Chicago. The interview questions considered the economic impact of illness, as well as the feasibility, logistics, and options of a training program for caregivers. Our data gathered from caregivers and leaders within this community support the acceptability of such a training program for informal caregivers, and also provide practical advice for development and implementation related to training cost, length, content, and instructional practices. PMID:26607814

Voices of Informal Caregivers and Community Stakeholders: Whether and How to Develop an Informal Caregiver Training Program.

PubMed

Phillips, Sara S; Ragas, Daiva M; Tom, Laura S; Hajjar, Nadia; Dong, XinQi; Simon, Melissa A

2016-06-01

Our primary objective was to gather pilot data from caregivers and stakeholders to guide the development of a training program to assist informal caregivers in re-entering the job market. The goal of the program would be to help caregivers rebound from their incurred economic burden by transitioning into a paid caregiving or other health-service role. The economic burden they bear often necessitates a return to the workforce following caregiving; yet the act of returning is complicated by an extended absence from the workforce and a lack of experience in other verifiably skilled and paid roles. We interviewed 37 stakeholders and 25 caregivers of a chronically or terminally ill family member or friend in a suburban collar county close to Chicago. The interview questions considered the economic impact of illness, as well as the feasibility, logistics, and options of a training program for caregivers. Our data gathered from caregivers and leaders within this community support the acceptability of such a training program for informal caregivers, and also provide practical advice for development and implementation related to training cost, length, content, and instructional practices.

Effects of two neuromuscular training programs on running biomechanics with load carriage: a study protocol for a randomised controlled trial.

PubMed

Liew, Bernard X W; Morris, Susan; Keogh, Justin W L; Appleby, Brendyn; Netto, Kevin

2016-10-22

In recent years, athletes have ventured into ultra-endurance and adventure racing events, which tests their ability to race, navigate, and survive. These events often require race participants to carry some form of load, to bear equipment for navigation and survival purposes. Previous studies have reported specific alterations in biomechanics when running with load which potentially influence running performance and injury risk. We hypothesize that a biomechanically informed neuromuscular training program would optimize running mechanics during load carriage to a greater extent than a generic strength training program. This will be a two group, parallel randomized controlled trial design, with single assessor blinding. Thirty healthy runners will be recruited to participate in a six weeks neuromuscular training program. Participants will be randomized into either a generic training group, or a biomechanically informed training group. Primary outcomes include self-determined running velocity with a 20 % body weight load, jump power, hopping leg stiffness, knee extensor and triceps-surae strength. Secondary outcomes include running kinetics and kinematics. Assessments will occur at baseline and post-training. To our knowledge, no training programs are available that specifically targets a runner's ability to carry load while running. This will provide sport scientists and coaches with a foundation to base their exercise prescription on. ANZCTR ( ACTRN12616000023459 ) (14 Jan 2016).

Targeting latent function: encouraging effective encoding for successful memory training and transfer.

PubMed

Lustig, Cindy; Flegal, Kristin E

2008-12-01

Cognitive training programs for older adults often result in improvements at the group level. However, there are typically large age and individual differences in the size of training benefits. These differences may be related to the degree to which participants implement the processes targeted by the training program. To test this possibility, we tested older adults in a memory-training procedure either under specific strategy instructions designed to encourage semantic, integrative encoding, or in a condition that encouraged time and attention to encoding but allowed participants to choose their own strategy. Both conditions improved the performance of old-old adults relative to an earlier study (D. Bissig & C. Lustig, 2007) and reduced self-reports of everyday memory errors. Performance in the strategy-instruction group was related to preexisting ability; performance in the strategy?choice group was not. The strategy-choice group performed better on a laboratory transfer test of recognition memory, and training performance was correlated with reduced everyday memory errors. Training programs that target participants' latent but inefficiently used abilities while allowing flexibility in bringing those abilities to bear may best promote effective training and transfer. Copyright (c) 2009 APA, all rights reserved.

STS-335 crew training, EVA TPS Overview with instructor John Ray

NASA Image and Video Library

2010-11-03

JSC2010-E-183523 (3 Nov. 2010) --- NASA astronauts Rex Walheim (left), STS-135 mission specialist; and Doug Hurley, pilot, participate in an EVA Thermal Protection System (TPS) overview training session in the TPS/ Precision Air Bearing Facility in the Space Vehicle Mock-up Facility at NASA's Johnson Space Center. STS-135 is planned to be the final mission of the space shuttle program. Photo credit: NASA or National Aeronautics and Space Administration

STS-335 crew training, EVA TPS Overview with instructor John Ray

NASA Image and Video Library

2010-11-03

JSC2010-E-183524 (3 Nov. 2010) --- NASA astronauts Rex Walheim (left), STS-135 mission specialist; and Doug Hurley, pilot, participate in an EVA Thermal Protection System (TPS) overview training session in the TPS/ Precision Air Bearing Facility in the Space Vehicle Mock-up Facility at NASA's Johnson Space Center. STS-135 is planned to be the final mission of the space shuttle program. Photo credit: NASA or National Aeronautics and Space Administration

Getting Our Partners Airborne: Training Air Advisors and Their Impact In-Theater

DTIC Science & Technology

2014-06-01

perform, over time, their roles and responsi- bilities independent of US assistance. This approach is now mature in Iraq, and if the United States...Afghan airframes has begun to bear fruit . Three AAF classes have completed their pilot training in Afghanistan and, on 23 June 2013, the fourth class...launched the KA-350 program and, after it matured , transitioned operations and maintenance to full control of the IqAF. May–June 2014 Air & Space

Results of NASA/Army transmission research

NASA Technical Reports Server (NTRS)

Coy, John J.; Townsend, Dennis P.; Coe, Harold H.

1988-01-01

Since 1970 the NASA Lewis Research Center and the U.S. Army Aviation Systems Command have shared an interest in advancing the technology for helicopter propulsion systems. In particular, that portion of the program that applies to the drive train and its various mechanical components are outlined. The major goals of the program were (and continue to be) to increase the life, reliability, and maintainability, reduce the weight, noise, and vibration, and maintain the relatively high mechanical efficiency of the gear train. Major historical milestones are reviewed, significant advances in technology for bearings, gears, and transmissions are discussed, and the outlook for the future is presented. The reference list is comprehensive.

Train axle bearing fault detection using a feature selection scheme based multi-scale morphological filter

NASA Astrophysics Data System (ADS)

Li, Yifan; Liang, Xihui; Lin, Jianhui; Chen, Yuejian; Liu, Jianxin

2018-02-01

This paper presents a novel signal processing scheme, feature selection based multi-scale morphological filter (MMF), for train axle bearing fault detection. In this scheme, more than 30 feature indicators of vibration signals are calculated for axle bearings with different conditions and the features which can reflect fault characteristics more effectively and representatively are selected using the max-relevance and min-redundancy principle. Then, a filtering scale selection approach for MMF based on feature selection and grey relational analysis is proposed. The feature selection based MMF method is tested on diagnosis of artificially created damages of rolling bearings of railway trains. Experimental results show that the proposed method has a superior performance in extracting fault features of defective train axle bearings. In addition, comparisons are performed with the kurtosis criterion based MMF and the spectral kurtosis criterion based MMF. The proposed feature selection based MMF method outperforms these two methods in detection of train axle bearing faults.

Combination of Weight-Bearing Training and Anti-MSTN Polyclonal Antibody Improve Bone Quality In Rats.

PubMed

Tang, Liang; Gao, Xiaohang; Yang, Xiaoying; Zhang, Didi; Zhang, Xiaojun; Du, Haiping; Han, Yanqi; Sun, Lijun

2016-12-01

Weight-bearing exercise is beneficial to bone health. Myostatin (MSTN) deficiency has a positive effect on bone formation. We wondered if a combination of weight-bearing training and polyclonal antibody for MSTN (MsAb) would augment bone formation to a greater degree than single treatment. In this study, rats were randomly assigned to four groups: Control, weight-bearing training (WT), MsAb, and WT+MsAb. The trained rats ran at 15 m/min bearing with 35% of their body weight, 40 min/day (2 min of running followed by 2 min of rest), 6 days/week, for 8 weeks. The rats with MsAb were injected once a week with MsAb for 8 weeks. MicroCT analysis showed that compared with the MsAb group, WT+MsAb significantly enhanced cortical bone mineral density (BMD) (p < .01), bone volume over total volume (BV/TV) (p < .01), trabecular thickness (p < .05), and reduced trabecular separation (Tb.Sp) (p < .01). Compared with the WT group, WT+MsAb significantly increased trabecular BMD (p < .05), BV/TV (p < .05), and decreased Tb.Sp (p < .05). Three-point bending test demonstrated that MsAb failed to improve bone biomechanical properties (p > .05), weight-bearing training significantly increased energy absorption (p < .05) and elastic modulus (p < .05). However, when they combined, biomechanical properties including maximum load (p < .05), stiffness (p < .05), elastic modulus (p < .01) and energy absorption (p < .01) were all significantly enhanced. In conclusion, the combination of weight-bearing training and MsAb have a greater positive effect on bone than treatment with either MsAb or weight-bearing training alone, suggesting that resistance training in combination with MSTN antagonists could be an effective approach for improving bone health and reducing osteoporosis risk.

Gender: Issues of Power and Equity in Counselor Education Programs.

ERIC Educational Resources Information Center

Hoffman, Rose Marie

1996-01-01

Argues that counselor educators have a responsibility to address gender issues and to find ways that encourage the exploration of these issues. Discusses professional standards and their bearing on gender, proposes models and strategies for incorporating gender issues, outlines a feminist training model, and explores Gender Aware Therapy as a…

Description of a multifaceted rehabilitation program including overground gait training for a child with cerebral palsy: A case report.

PubMed

Farrell, Elizabeth; Naber, Erin; Geigle, Paula

2010-01-01

This case describes the outcomes of a multifaceted rehabilitation program including body weight-supported overground gait training (BWSOGT) in a nonambulatory child with cerebral palsy (CP) and the impact of this treatment on the child's functional mobility. The patient is a nonambulatory 10-year-old female with CP who during an inpatient rehabilitation stay participated in direct, physical therapy 6 days per week for 5 weeks. Physical therapy interventions included stretching of her bilateral lower extremities, transfer training, bed mobility training, balance training, kinesiotaping, supported standing in a prone stander, two trials of partial weight-supported treadmill training, and for 4 weeks, three to five times per week, engaged in 30 minutes of BWSOGT using the Up n' go gait trainer, Lite Gait Walkable, and Rifton Pacer gait trainer. Following the multifaceted rehabilitation program, the patient demonstrated increased step initiation, increased weight bearing through bilateral lower extremities, improved bed mobility, and increased participation in transfers. The child's Gross Motor Functional Measure (GMFM) scores increased across four dimensions and her Physical Abilities and Mobility Scale (PAMS) increased significantly. This case report illustrates that a multifaceted rehabilitation program including BWSOGT was an effective intervention strategy to improve functional mobility in this nonambulatory child with CP.

Monitoring Student Immunization, Screening, and Training Records for Clinical Compliance: An Innovative Use of the Institutional Learning Management System.

PubMed

Elting, Julie Kientz

2017-12-13

Clinical compliance for nursing students is a complex process mandating them to meet facility employee occupational health requirements for immunization, screening, and training prior to patient contact. Nursing programs monitor clinical compliance with in-house management of student records, either paper or electronic, or by contracting with a vendor specializing in online record tracking. Regardless of method, the nursing program remains fully accountable for student preparation and bears the consequences of errors. This article describes how the institution's own learning management system can be used as an accurate, cost-neutral, user-friendly, and Federal Educational Rights Protection Act-compliant clinical compliance system.

AUTOMOTIVE DIESEL MAINTENANCE 1. UNIT XX, CUMMINS DIESEL ENGINE, MAINTENANCE SUMMARY.

ERIC Educational Resources Information Center

Minnesota State Dept. of Education, St. Paul. Div. of Vocational and Technical Education.

THIS MODULE OF A 30-MODULE COURSE IS DESIGNED TO PROVIDE A SUMMARY OF THE REASONS AND PROCEDURES FOR DIESEL ENGINE MAINTENANCE. TOPICS ARE WHAT ENGINE BREAK-IN MEANS, ENGINE BREAK-IN, TORQUING BEARINGS (TEMPLATE METHOD), AND THE NEED FOR MAINTENANCE. THE MODULE CONSISTS OF A SELF-INSTRUCTIONAL BRANCH PROGRAMED TRAINING FILM "CUMMINS DIESEL ENGINE…

[Fundación Mundo Bipolar: learning among peers in the service of recovery].

PubMed

Morales Cano, Guadalupe

2013-01-01

Due to severe mental illness, such as a diagnosis of bipolar disorder, people's quality of life may be seriously compromised and they may bear the risk of losing opportunities and being socially isolated as a result of stigma and discrimination. Early diagnosis is crucial, as a recovery process is possible with appropriate medical and psychosocial treatment. A person affected by such circumstances, with adequate training, can learn to handle his condition by himself and become expert by experience. This article depicts how learning among peers, based to a large degree on empathy, enables and promotes self management and, at the same time, a larger political and social consciousness. This has been affirmed by the virtual community of bipolarweb since 2002 and, subsequently, as a further development by the Fundación Mundo Bipolar. This foundation, which offers a training program for people affected by bipolar disorder, engages in several activities and goals which are described in this paper. It also has developed a multidisciplinary program for the training of trainers. Some features of these programs are summarized, with a special emphasis on the fact that trained students are encouraged to give lectures for high school students. This paper summarizes qualitative evaluations made by participants that have followed each of the sessions of the training programs.

Effect of stabilization training on multifidus muscle cross-sectional area among young elite cricketers with low back pain.

PubMed

Hides, Julie A; Stanton, Warren R; McMahon, Shaun; Sims, Kevin; Richardson, Carolyn A

2008-03-01

A single-blinded, pretreatment-posttreatment assessment. To investigate, using ultrasound imaging, the cross-sectional area (CSA) of the lumbar multifidus muscle at 4 vertebral levels (L2, L3, L4, L5) in elite cricketers with and without low back pain (LBP) and (2) to document the effect of a staged stabilization training program on multifidus muscle CSA. Despite high fitness levels and often intensive strength training programs, athletes still suffer LBP. The incidence of LBP among Australian cricketers is 8% and as high as 14% among fast bowlers. Previous researchers have found that the multifidus muscle contributes to segmental stability of the lumbopelvic region; however, the CSA of this muscle has not been previously assessed in elite cricketers. CSAs of the multifidus muscles were assessed at rest on the left and right sides for 4 vertebral levels at the start and completion of a 13-week cricket training camp. Participants who reported current or previous LBP were placed in a rehabilitation group. The stabilization program involved voluntary contraction of the multifidus, transversus abdominis, and pelvic floor muscles, with real-time feedback from rehabilitative ultrasound imaging (RUSI), progressed from non-weight-bearing to weight-bearing positions and movement training. Pain scores (using a visual analogue scale) were also collected from those with LBP. The CSAs of the multifidus muscles at the L5 vertebral level increased for the 7 cricketers with LBP who received the stabilization training, compared with the 14 cricketers without LBP who did not receive rehabilitation (P = .004). In addition, the amount of muscle asymmetry among those with LBP significantly decreased (P = .029) and became comparable to cricketers without LBP. These effects were not evident for the L2, L3, and L4 vertebral levels. There was also a 50% decrease in the mean reported pain level among the cricketers with LBP. Multifidus muscle atrophy can exist in highly active, elite athletes with LBP. Specific retraining resulted in an improvement in multifidus muscle CSA and this was concomitant with a decrease in pain. Therapy, level 2b.

The effect of motor control training on abdominal muscle contraction during simulated weight bearing in elite cricketers.

PubMed

Hides, Julie A; Endicott, Timothy; Mendis, M Dilani; Stanton, Warren R

2016-07-01

To investigate whether motor control training alters automatic contraction of abdominal muscles in elite cricketers with low back pain (LBP) during performance of a simulated unilateral weight-bearing task. Clinical trial. 26 male elite-cricketers attended a 13-week cricket training camp. Prior to the camp, participants were allocated to a LBP or asymptomatic group. Real-time ultrasound imaging was used to assess automatic abdominal muscle response to axial loading. During the camp, the LBP group performed a staged motor control training program. Following the camp, the automatic response of the abdominal muscles was re-assessed. At pre-camp assessment, when participants were axially loaded with 25% of their own bodyweight, the LBP group showed a 15.5% thicker internal oblique (IO) muscle compared to the asymptomatic group (p = 0.009). The post-camp assessment showed that participants in the LBP group demonstrated less contraction of the IO muscle in response to axial loading compared with the asymptomatic group. A trend was found in the automatic recruitment pattern of the transversus abdominis (p = 0.08). Motor control training normalized excessive contraction of abdominal muscles in response to a low load task. This may be a useful strategy for rehabilitation of cricketers with LBP. Copyright © 2016 Elsevier Ltd. All rights reserved.

STS-335 crew training, EVA TPS Overview with instructor John Ray

NASA Image and Video Library

2010-11-03

JSC2010-E-183513 (3 Nov. 2010) --- STS-135 crew members participate in an EVA Thermal Protection System (TPS) overview training session in the TPS/ Precision Air Bearing Facility in the Space Vehicle Mock-up Facility at NASA's Johnson Space Center. Pictured from the left are NASA astronauts Chris Ferguson, commander; Rex Walheim, mission specialist; Doug Hurley, pilot; and Sandy Magnus, mission specialist. John Ray (right) assisted the crew members. STS-135 is planned to be the final mission of the space shuttle program. Photo credit: NASA or National Aeronautics and Space Administration

STS-335 crew training, EVA TPS Overview with instructor John Ray

NASA Image and Video Library

2010-11-03

JSC2010-E-183514 (3 Nov. 2010) --- STS-135 crew members participate in an EVA Thermal Protection System (TPS) overview training session in the TPS/ Precision Air Bearing Facility in the Space Vehicle Mock-up Facility at NASA's Johnson Space Center. Pictured from the left are NASA astronauts Chris Ferguson, commander; Rex Walheim, mission specialist; Doug Hurley, pilot; and Sandy Magnus, mission specialist. John Ray (right) assisted the crew members. STS-135 is planned to be the final mission of the space shuttle program. Photo credit: NASA or National Aeronautics and Space Administration

STS-335 crew training, EVA TPS Overview with instructor John Ray

NASA Image and Video Library

2010-11-03

JSC2010-E-183512 (3 Nov. 2010) --- STS-135 crew members participate in an EVA Thermal Protection System (TPS) overview training session in the TPS/ Precision Air Bearing Facility in the Space Vehicle Mock-up Facility at NASA's Johnson Space Center. Pictured from the left are NASA astronauts Chris Ferguson, commander; Rex Walheim, mission specialist; Doug Hurley, pilot; and Sandy Magnus, mission specialist. John Ray (right) assisted the crew members. STS-135 is planned to be the final mission of the space shuttle program. Photo credit: NASA or National Aeronautics and Space Administration

Effects of off-axis elliptical training on reducing pain and improving knee function in individuals with patellofemoral pain

PubMed Central

Tsai, Liang-Ching; Lee, Song Joo; Yang, Aaron J.; Ren, Yupeng; Press, Joel M.; Zhang, Li-Qun

2014-01-01

Objective To examine whether an off-axis elliptical training program reduces pain and improves knee function in individuals with patellofemoral pain (PFP). Design Controlled laboratory study, pre-test-post-test. Setting University rehabilitation center. Participants Twelve adult subjects with PFP. Interventions Subjects with PFP completed an exercise program consisting of 18 sessions of lower extremity off-axis training using a custom-made elliptical trainer that allows frontal-plane sliding and transverse-plane pivoting of the footplates. Main Outcome Measures Changes in knee pain and function post-training and 6 weeks following training were evaluated using the Knee Injury and Osteoarthritis Outcome Score (KOOS) and International Knee Documentation Committee (IKDC) scores. Lower extremity off-axis control was assessed by pivoting and sliding instability, calculated as the root mean square (RMS) of the footplate pivoting angle and sliding distance during elliptical exercise. Subjects’ single-leg hop distance and proprioception in detecting lower extremity pivoting motion were also evaluated. Results Subjects reported significantly greater KOOS and IKDC scores (increased by 12–18 points) and hop distance (increased by 0.2 m) following training. A significant decrease in the pivoting and sliding RMS was also observed following training. Additionally, subjects with PFP demonstrated improved pivoting proprioception when tested under a minimum-weight-bearing position. Conclusions An off-axis elliptical training program was effective in enhancing lower extremity neuromuscular control on the frontal and transverse planes, reducing pain and improving knee function in persons with PFP. PMID:25591131

Espousing melodic intonation therapy in aphasia rehabilitation: a case study.

PubMed

Goldfarb, R; Bader, E

1979-01-01

A program of Melodic Intonation Therapy (MIT) was adapted as a home training procedure to enable a severely affected aphasic adult to respond to 52 simple questions bearing relevance to his daily life. MIT involves embedding short phrases or sentences in a simple, non-distinct melody pattern. As the patient progresses through the program, the melodic aspect is faded and the program eventually leads to production of the target phrase or sentence in normal speech prosody. The present procedure consisted of three levels of training designed to advance the subject from an initial level of intoning responses in a simple melody to producing the responses in normal speech prosody. The subject's wife was trained to administer MIT both in the clinical and home settings. Considerable improvement was obtained in imitation and in context related responses to questions. These findings lend support to the proposal that the music dominance to the right hemisphere assists, and perhaps diminishes the language dominance of, the damaged left hemisphere. The limitations of use of Melodic Intonation Therapy were discussed.

The Continental Margins Program in Georgia

USGS Publications Warehouse

Cocker, M.D.; Shapiro, E.A.

1999-01-01

From 1984 to 1993, the Georgia Geologic Survey (GGS) participated in the Minerals Management Service-funded Continental Margins Program. Geological and geophysical data acquisition focused on offshore stratigraphic framework studies, phosphate-bearing Miocene-age strata, distribution of heavy minerals, near-surface alternative sources of groundwater, and development of a PC-based Coastal Geographic Information System (GIS). Seven GGS publications document results of those investigations. In addition to those publications, direct benefits of the GGS's participation include an impetus to the GGS's investigations of economic minerals on the Georgia coast, establishment of a GIS that includes computer hardware and software, and seeds for additional investigations through the information and training acquired as a result of the Continental Margins Program. These addtional investigations are quite varied in scope, and many were made possible because of GIS expertise gained as a result of the Continental Margins Program. Future investigations will also reap the benefits of the Continental Margins Program.From 1984 to 1993, the Georgia Geologic Survey (GGS) participated in the Minerals Management Service-funded Continental Margins Program. Geological and geophysical data acquisition focused on offshore stratigraphic framework studies, phosphate-bearing Miocene-age strata, distribution of heavy minerals, near-surface alternative sources of groundwater, and development of a PC-based Coastal Geographic Information System (GIS). Seven GGS publications document results of those investigations. In addition to those publications, direct benefits of the GGS's participation include an impetus to the GGS's investigations of economic minerals on the Georgia coast, establishment of a GIS that includes computer hardware and software, and seeds for additional investigations through the information and training acquired as a result of the Continental Margins Program. These additional investigations are quite varied in scope, and many were made possible because of GIS expertise gained as a result of the Continental Margins Program. Future investigations will also reap the benefits of the Continental Margins Program.

Combined effect of aerobic interval training and selenium nanoparticles on expression of IL-15 and IL-10/TNF-α ratio in skeletal muscle of 4T1 breast cancer mice with cachexia.

PubMed

Molanouri Shamsi, M; Chekachak, S; Soudi, S; Quinn, L S; Ranjbar, K; Chenari, J; Yazdi, M H; Mahdavi, M

2017-02-01

Cancer cachexia is characterized by inflammation, loss of skeletal muscle and adipose tissue mass, and functional impairment. Oxidative stress and inflammation are believed to regulate pathways controlling skeletal muscle wasting. The aim of this study was to determine the effects of aerobic interval training and the purported antioxidant treatment, selenium nanoparticle supplementation, on expression of IL-15 and inflammatory cytokines in 4T1 breast cancer-bearing mice with cachexia. Selenium nanoparticle supplementation accelerated cachexia symptoms in tumor-bearing mice, while exercise training prevented muscle wasting in tumor-bearing mice. Also, aerobic interval training enhanced the anti-inflammatory indices IL-10/TNF-α ratio and IL-15 expression in skeletal muscle in tumor-bearing mice. However, combining exercise training and antioxidant supplementation prevented cachexia and muscle wasting and additionally decreased tumor volume in 4T1 breast cancer mice. These finding suggested that combining exercise training and antioxidant supplementation could be a strategy for managing tumor volume and preventing cachexia in breast cancer. Copyright © 2016 Elsevier Ltd. All rights reserved.

The performance and application of high speed long life LH2 hybrid bearings for reusable rocket engine turbomachinery

NASA Technical Reports Server (NTRS)

Hannum, N. P.; Nielson, C. E.

1983-01-01

Data are presented for two different experimental programs which were conducted to investigate the characteristics of a hybrid (hydrostatic/ball) bearing operating in liquid hydrogen. The same bearing design was used in both programs. Analytical predictions were made of the bearing characteristics and are compared with the experimental results when possible. The first program used a bearing tester to determine the steady state, transient, and cyclic life characteristics of the bearing over a wide range of operating conditions. The second program demonstrated the feasibility of applying hybrid bearings to an actual high speed turbopump by retrofitting and then testing an existing liquid hydrogen turbopump with the bearings.

Flywheel energy storage workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

O`Kain, D.; Carmack, J.

Since the November 1993 Flywheel Workshop, there has been a major surge of interest in Flywheel Energy Storage. Numerous flywheel programs have been funded by the Advanced Research Projects Agency (ARPA), by the Department of Energy (DOE) through the Hybrid Vehicle Program, and by private investment. Several new prototype systems have been built and are being tested. The operational performance characteristics of flywheel energy storage are being recognized as attractive for a number of potential applications. Programs are underway to develop flywheels for cars, buses, boats, trains, satellites, and for electric utility applications such as power quality, uninterruptible power supplies,more » and load leveling. With the tremendous amount of flywheel activity during the last two years, this workshop should again provide an excellent opportunity for presentation of new information. This workshop is jointly sponsored by ARPA and DOE to provide a review of the status of current flywheel programs and to provide a forum for presentation of new flywheel technology. Technology areas of interest include flywheel applications, flywheel systems, design, materials, fabrication, assembly, safety & containment, ball bearings, magnetic bearings, motor/generators, power electronics, mounting systems, test procedures, and systems integration. Information from the workshop will help guide ARPA & DOE planning for future flywheel programs. This document is comprised of detailed viewgraphs.« less

Modeling of rolling element bearing mechanics. Computer program user's manual

NASA Technical Reports Server (NTRS)

Greenhill, Lyn M.; Merchant, David H.

1994-01-01

This report provides the user's manual for the Rolling Element Bearing Analysis System (REBANS) analysis code which determines the quasistatic response to external loads or displacement of three types of high-speed rolling element bearings: angular contact ball bearings, duplex angular contact ball bearings, and cylindrical roller bearings. The model includes the defects of bearing ring and support structure flexibility. It is comprised of two main programs: the Preprocessor for Bearing Analysis (PREBAN) which creates the input files for the main analysis program, and Flexibility Enhanced Rolling Element Bearing Analysis (FEREBA), the main analysis program. This report addresses input instructions for and features of the computer codes. A companion report addresses the theoretical basis for the computer codes. REBANS extends the capabilities of the SHABERTH (Shaft and Bearing Thermal Analysis) code to include race and housing flexibility, including such effects as dead band and preload springs.

An Interactive Teddy Bear Clinic Tour: Teaching Veterinary Students How to Interact with Young Children.

PubMed

Dalley, Jessica S; Creary, Patricia R; Durzi, Tiffany; McMurtry, C Meghan

Although there are existing guidelines for teaching and learning skillful client communication, there remains a need to integrate a developmental focus into veterinary medical curricula to prepare students for interactions with children who accompany their companion animals. The objectives of this teaching tip are (1) to describe the use of a Teddy Bear Clinic Tour as an innovative, applied practice method for teaching veterinary students about clinical communication with children, and (2) to provide accompanying resources to enable use of this method to teach clinical communication at other facilities. This paper includes practical guidelines for organizing a Teddy Bear Clinic Tour at training clinics or colleges of veterinary medicine; an anecdotal description of a pilot study at the Ontario Veterinary College Smith Lane Animal Hospital; and printable resources, including a list of specific clinical communication skills, a sample evaluation sheet for supervisors and students, recommendations for creating a child-friendly environment, examples of child-friendly veterinary vocabulary, and a sample script for a Teddy Bear Clinic Tour. Informed by the resources provided in this teaching tip paper, the Teddy Bear Clinic Tour can be used at your facility as a unique teaching method for clinical communication with children and as a community outreach program to advertise the services at the facility.

The immediate and long-term effects of a walking-skill program compared to usual physiotherapy care in patients who have undergone total knee arthroplasty (TKA): a randomized controlled trial.

PubMed

Bruun-Olsen, Vigdis; Heiberg, Kristi Elisabeth; Wahl, Astrid Klopstad; Mengshoel, Anne Marit

2013-01-01

To examine the immediate and long-term effects of a walking-skill program compared with usual physiotherapy on physical function, pain and perceived self-efficacy in patients after total knee arthroplasty (TKA). A single blind randomized controlled trial design was applied. Fifty-seven patients with primary TKA, mean age of 69 years (SD ± 9), were randomly assigned to a walking-skill program emphasizing weight-bearing exercises or usual physiotherapy. Outcomes were assessed before the interventions started at 6 weeks postoperatively (T1), directly after the interventions at 12-14 weeks (T2) and 9 months after the interventions (T3). Walking was the primary outcome, assessed by the 6 min walk test (6MWT). The secondary outcomes were timed stair climbing, timed stands, Figure-of-eight test, Index of muscle function, active knee range of motion, Knee Injury and Osteoarthritis Outcome Score and self-efficacy score. From T1 to T2, a better 6MWT score was found in favor of the walking-skill program of 39 m (2-76), p = 0.04. The difference between the groups in 6MWT persisted at T3, 44 m (8-80), p = 0.02. No differences in other outcome measures were found. The walking-skill program had better effect on walking than usual physiotherapy. Weight bearing was tolerated. Implications for Rehabilitation Weight-bearing exercises are tolerated by the patients in the early stage after TKA. Physiotherapy that focuses on learning different ways of walking through practice may be a plausible way to train patients after TKA.

Doppler distortion correction based on microphone array and matching pursuit algorithm for a wayside train bearing monitoring system

NASA Astrophysics Data System (ADS)

Liu, Xingchen; Hu, Zhiyong; He, Qingbo; Zhang, Shangbin; Zhu, Jun

2017-10-01

Doppler distortion and background noise can reduce the effectiveness of wayside acoustic train bearing monitoring and fault diagnosis. This paper proposes a method of combining a microphone array and matching pursuit algorithm to overcome these difficulties. First, a dictionary is constructed based on the characteristics and mechanism of a far-field assumption. Then, the angle of arrival of the train bearing is acquired when applying matching pursuit to analyze the acoustic array signals. Finally, after obtaining the resampling time series, the Doppler distortion can be corrected, which is convenient for further diagnostic work. Compared with traditional single-microphone Doppler correction methods, the advantages of the presented array method are its robustness to background noise and its barely requiring pre-measuring parameters. Simulation and experimental study show that the proposed method is effective in performing wayside acoustic bearing fault diagnosis.

Stable isotopes reveal rail-associated behavior in a threatened carnivore.

PubMed

Hopkins, John B; Whittington, Jesse; Clevenger, Anthony P; Sawaya, Michael A; St Clair, Colleen Cassady

2014-01-01

Human-wildlife conflict is a leading cause of adult mortality for large carnivores worldwide. Train collision is the primary cause of mortality for threatened grizzly bears (Ursus arctos) in Banff National Park. We investigated the use of stable isotope analysis as a tool for identifying bears that use the railway in Banff. Rail-associated bears had higher δ(15)N and δ(34)S values than bears sampled away from the rail, but similar δ(13)C values. Because elevated δ(15)N values are indicative of higher animal protein consumption, rail-associated bears likely preyed on ungulates that foraged along the rail or scavenged on train-killed animals. The higher δ(34)S values in bear hair could have resulted from bears consuming sulfur pellets spilled on the rail or through the uptake of sulfur in the plants bears or animals consumed. Similar δ(13)C values suggest that the two types of bears had generally similar plant-based diets. Results from this study suggest that stable isotopes analysis could be used as a non-invasive, affordable, and efficient technique to identify and monitor bears that forage on the railway in Banff and potentially other transportation corridors worldwide.

Stable isotopes reveal rail-associated behavior in a threatened carnivore

PubMed Central

Hopkins, John B.; Whittington, Jesse; Clevenger, Anthony P.; Sawaya, Michael A.; St. Clair, Colleen Cassady

2014-01-01

Human–wildlife conflict is a leading cause of adult mortality for large carnivores worldwide. Train collision is the primary cause of mortality for threatened grizzly bears (Ursus arctos) in Banff National Park. We investigated the use of stable isotope analysis as a tool for identifying bears that use the railway in Banff. Rail-associated bears had higher δ15N and δ34S values than bears sampled away from the rail, but similar δ13C values. Because elevated δ15N values are indicative of higher animal protein consumption, rail-associated bears likely preyed on ungulates that foraged along the rail or scavenged on train-killed animals. The higher δ34S values in bear hair could have resulted from bears consuming sulfur pellets spilled on the rail or through the uptake of sulfur in the plants bears or animals consumed. Similar δ13C values suggest that the two types of bears had generally similar plant-based diets. Results from this study suggest that stable isotopes analysis could be used as a non-invasive, affordable, and efficient technique to identify and monitor bears that forage on the railway in Banff and potentially other transportation corridors worldwide. PMID:24936982

A 4-week neuromuscular training program and gait patterns at the ankle joint.

PubMed

Coughlan, Garrett; Caulfield, Brian

2007-01-01

Previous research into the rehabilitation of ankle sprains has primarily focused on outcome measures that do not replicate functional activities, thus making it difficult to extrapolate the results relative to the weight-bearing conditions under which most ankle sprains occur. To measure the effects of a training program on gait during walking and running in an active athletic population. Matched-pairs, controlled trial. University motion analysis laboratory. Ten subjects from an athletic population (7 healthy, 3 with functional ankle instability: age = 25.8 +/- 3.9 years, height = 177.6 +/- 6.1 cm, mass = 66.8 +/- 7.4 kg) and 10 controls matched for age, sex, activity, and ankle instability (7 healthy, 3 with functional ankle instability: age = 27.4 +/- 5.8 years, height = 178.7 +/- 10.8 cm, mass = 71.6 +/- 10.0 kg). A 4-week neuromuscular training program undertaken by the treatment group. We measured ankle position and velocity in the frontal (x) and sagittal (y) planes in all subjects during treadmill walking and running for the periods 100 milliseconds before heel strike, at heel strike, and 100 milliseconds after heel strike. A 4-week neuromuscular training program resulted in no significant changes in ankle position or velocity during treadmill walking and running. The mechanisms by which neuromuscular training improves function in normal subjects and those with functional ankle instability do not appear to result in measurable changes in gait kinematics. Our findings raise issues regarding methods of ankle sprain rehabilitation and the measurement of their effectiveness in improving functional activities. Further research in a larger population with functional ankle instability is necessary.

The effects of strength and endurance training in patients with rheumatoid arthritis.

PubMed

Strasser, Barbara; Leeb, Gunther; Strehblow, Christoph; Schobersberger, Wolfgang; Haber, Paul; Cauza, Edmund

2011-05-01

Patients with rheumatoid arthritis (RA) suffer from muscle loss, causing reduced muscle strength and endurance. The current study aimed to: (1) evaluate the effects of combined strength and endurance training (CT) on disease activity and functional ability in patients with RA and (2) investigate the benefits of a 6-month supervised CT program on muscle strength, cardio-respiratory fitness, and body composition of RA patients. Forty patients with RA, aged 41-73 years, were recruited for the current study. Twenty of these patients (19 females, one male) were randomly assigned to a 6-month supervised CT program; 20 patients (17 females, three males) served as controls. Within the CT program, strength training consisted of sets of weight bearing exercises for all major muscle groups. In addition to strength training, systematic endurance training was performed on a cycle ergometer two times per week. For RA patients involved in CT, disease activity (p = 0.06) and pain (p = 0.05) were reduced after the 6-month training period while general health (p = 0.04) and functional ability (p = 0.06) improved. Cardio-respiratory endurance was found to have improved significantly (by 10%) after 6 months of CT (p < 0.001). The overall strength of patients undertaking CT increased by an average of 14%. Lean body mass increased, and the percentage of body fat was found to decrease significantly (p < 0.05). A combination of strength and endurance training resulted in considerable improvements in RA patients' muscle strength and cardio-respiratory endurance, accompanied by positive changes in body composition and functional ability. Long-term training appears to be effective in reducing disease activity and associated pain and was found to have no deleterious effects.

Are falls prevention programs effective at reducing the risk factors for falls in people with type-2 diabetes mellitus and peripheral neuropathy: A systematic review with narrative synthesis.

PubMed

Gu, Yu; Dennis, Sarah M

2017-02-01

Diabetic peripheral neuropathy (DPN) is a common complication of type-2 diabetes mellitus (T2DM) that predisposes the elderly to a higher falls risk. Falls prevention programs with a component of weight-bearing exercises are effective in decreasing future falls in the elderly. However, weight-bearing exercise was only recently recommended in guidelines for exercise for people with T2DM and DPN. Since then, there have been an increasing number of studies to evaluate the effectiveness of falls prevention programs on this targeted population. A systematic literature review was undertaken to determine the effectiveness of falls prevention programs for people with T2DM and DPN. Nine published studies that investigated the effect of exercise training on falls risk among people with T2DM and DPN were included in the review. Interventions included lower limb strengthening, balance practice, aerobic exercise, walking programs, and Tai Chi. The preliminary evidence presented in this review suggests that people with T2DM and DPN can improve their balance and walking after a targeted multicomponent program without risk of serious adverse events. There is insufficient long-term follow-up data to determine whether the improvements in balance or strength resulted in a decrease falls risk in the community setting. Copyright © 2016 Elsevier Inc. All rights reserved.

Training Rapid Stepping Responses in an Individual With Stroke

PubMed Central

Inness, Elizabeth L.; Komar, Janice; Biasin, Louis; Brunton, Karen; Lakhani, Bimal; McIlroy, William E.

2011-01-01

Background and Purpose Compensatory stepping reactions are important responses to prevent a fall following a postural perturbation. People with hemiparesis following a stroke show delayed initiation and execution of stepping reactions and often are found to be unable to initiate these steps with the more-affected limb. This case report describes a targeted training program involving repeated postural perturbations to improve control of compensatory stepping in an individual with stroke. Case Description Compensatory stepping reactions of a 68-year-old man were examined 52 days after left hemorrhagic stroke. He required assistance to prevent a fall in all trials administered during his initial examination because he showed weight-bearing asymmetry (with more weight borne on the more-affected right side), was unable to initiate stepping with the right leg (despite blocking of the left leg in some trials), and demonstrated delayed response times. The patient completed 6 perturbation training sessions (30–60 minutes per session) that aimed to improve preperturbation weight-bearing symmetry, to encourage stepping with the right limb, and to reduce step initiation and completion times. Outcomes Improved efficacy of compensatory stepping reactions with training and reduced reliance on assistance to prevent falling were observed. Improvements were noted in preperturbation asymmetry and step timing. Blocking the left foot was effective in encouraging stepping with the more-affected right foot. Discussion This case report demonstrates potential short-term adaptations in compensatory stepping reactions following perturbation training in an individual with stroke. Future work should investigate the links between improved compensatory step characteristics and fall risk in this vulnerable population. PMID:21511992

Applying health education theory to patient safety programs: three case studies.

PubMed

Gilkey, Melissa B; Earp, Jo Anne L; French, Elizabeth A

2008-04-01

Program planning for patient safety is challenging because intervention-oriented surveillance data are not yet widely available to those working in this nascent field. Even so, health educators are uniquely positioned to contribute to patient safety intervention efforts because their theoretical training provides them with a guide for designing and implementing prevention programs. This article demonstrates the utility of applying health education concepts from three prominent patient safety campaigns, including the concepts of risk perception, community participation, and social marketing. The application of these theoretical concepts to patient safety programs suggests that health educators possess a knowledge base and skill set highly relevant to patient safety and that their perspective should be increasingly brought to bear on the design and evaluation of interventions that aim to protect patients from preventable medical error.

Union-related correlates of employee referrals to an occupational alcoholism project in a health maintenance organization.

PubMed

Putnam, S L; Stout, R L

1982-03-01

A number of union-related factors, including the degree of unionization and the skill level of the work force, the quality of union-management relations, the extent of union involvement in program development, as well as the provision of supervisory training, have been found to be important in explaining occupational alcoholism program outcome. This study attempted to determine the relationship of such factors to an unusual measure of program outcome, employee referrals to the treatment component of an occupational alcoholism project housed in the counseling department of a health maintenance organization. Multiple-regression techniques were used, with data collected for unionized companies that adopted formal, written employee assistance program (EAP) policies and those that did not. The adoption of an EAP policy seems more important than any other factor in predicting referrals to treatment, In unionized companies without policies, the union-related factors bear no relationship to referrals, while in unionized companies with policies, these variables, particularly the quality of union-management relations, are strong predictors. Supervisory training has only a modest positive effect on referrals. The adoption of an employee assistance policy itself was found to be crucial to program outcome, measured by increased chances of referrals.

Modeling of rolling element bearing mechanics. Theoretical manual

NASA Technical Reports Server (NTRS)

Merchant, David H.; Greenhill, Lyn M.

1994-01-01

This report documents the theoretical basis for the Rolling Element Bearing Analysis System (REBANS) analysis code which determines the quasistatic response to external loads or displacement of three types of high-speed rolling element bearings: angular contact ball bearings; duplex angular contact ball bearings; and cylindrical roller bearings. The model includes the effects of bearing ring and support structure flexibility. It is comprised of two main programs: the Preprocessor for Bearing Analysis (PREBAN) which creates the input files for the main analysis program; and Flexibility Enhanced Rolling Element Bearing Analysis (FEREBA), the main analysis program. A companion report addresses the input instructions for and features of the computer codes. REBANS extends the capabilities of the SHABERTH (Shaft and Bearing Thermal Analysis) code to include race and housing flexibility, including such effects as dead band and preload springs.

Thermohydrodynamic analysis of cryogenic liquid turbulent flow fluid film bearings, phase 2

NASA Technical Reports Server (NTRS)

Sanandres, Luis

1994-01-01

The Phase 2 (1994) Annual Progress Report presents two major report sections describing the thermal analysis of tilting- and flexure-pad hybrid bearings, and the unsteady flow and transient response of a point mass rotor supported on fluid film bearings. A literature review on the subject of two-phase flow in fluid film bearings and part of the proposed work for 1995 are also included. The programs delivered at the end of 1994 are named hydroflext and hydrotran. Both codes are fully compatible with the hydrosealt (1993) program. The new programs retain the same calculating options of hydrosealt plus the added bearing geometries, and unsteady flow and transient forced response. Refer to the hydroflext & hydrotran User's Manual and Tutorial for basic information on the analysis and instructions to run the programs. The Examples Handbook contains the test bearing cases along with comparisons with experimental data or published analytical values. The following major tasks were completed in 1994 (Phase 2): (1) extension of the thermohydrodynamic analysis and development of computer program hydroflext to model various bearing geometries, namely, tilting-pad hydrodynamic journal bearings, flexure-pad cylindrical bearings (hydrostatic and hydrodynamic), and cylindrical pad bearings with a simple elastic matrix (ideal foil bearings); (2) improved thermal model including radial heat transfer through the bearing stator; (3) calculation of the unsteady bulk-flow field in fluid film bearings and the transient response of a point mass rotor supported on bearings; and (4) a literature review on the subject of two-phase flows and homogeneous-mixture flows in thin-film geometries.

A new voluntary blood collection method for the Andean bear (Tremarctos ornatus) and Asiatic black bear (Ursus thibetanus).

PubMed

Otaki, Yusuke; Kido, Nobuhide; Omiya, Tomoko; Ono, Kaori; Ueda, Miya; Azumano, Akinori; Tanaka, Sohei

2015-01-01

Various training methods have been developed for animal husbandry and health care in zoos and one of these trainings is blood collection. One training method, recently widely used for blood collection in Ursidae, requires setting up a sleeve outside the cage and gives access to limited blood collection sites. A new voluntary blood collection method without a sleeve was applied to the Andean bear (Tremarctos ornatus) and Asiatic black bear (Ursus thibetanus) with access to various veins at the same time. The present study evaluated the effectiveness of this new method and suggests improvements. Two Andean and two Asiatic black bears in Yokohama and Nogeyama Zoological Gardens, respectively, were trained to hold a bamboo pipe outside their cages. We could, thereby, simultaneously access superficial dorsal veins, the dorsal venous network of the hand, the cephalic vein from the carpal joint, and an area approximately 10 cm proximal to the carpal joint. This allowed us to evaluate which vein was most suitable for blood collection. We found that the cephalic vein, approximately 10 cm proximal to the carpal joint, was the most suitable for blood collection. This new method requires little or no modification of zoo facilities and provides a useful alternative method for blood collection. It could be adapted for use in other clinical examinations such as ultrasound examination. © 2015 Wiley Periodicals, Inc.

Computer program for flat sector thrust bearing performance

NASA Technical Reports Server (NTRS)

Presler, A. F.; Etsion, I.

1977-01-01

A versatile computer program is presented which achieves a rapid, numerical solution of the Reynolds equation for a flat sector thrust pad bearing with either compressible or liquid lubricants. Program input includes a range in values of the geometric and operating parameters of the sector bearing. Performance characteristics are obtained from the calculated bearing pressure distribution. These are the load capacity, center of pressure coordinates, frictional energy dissipation, and flow rates of liquid lubricant across the bearing edges. Two sample problems are described.

Bearing restoration by grinding

NASA Technical Reports Server (NTRS)

Hanau, H.; Parker, R. J.; Zaretsky, E. V.; Chen, S. M.; Bull, H. L.

1976-01-01

A joint program was undertaken by the NASA Lewis Research Center and the Army Aviation Systems Command to restore by grinding those rolling-element bearings which are currently being discarded at aircraft engine and transmission overhaul. Three bearing types were selected from the UH-1 helicopter engine (T-53) and transmission for the pilot program. No bearing failures occurred related to the restoration by grinding process. The risk and cost of a bearing restoration by grinding programs was analyzed. A microeconomic impact analysis was performed.

Effects of robot-guided passive stretching and active movement training of ankle and mobility impairments in stroke.

PubMed

Waldman, Genna; Yang, Chung-Yong; Ren, Yupeng; Liu, Lin; Guo, Xin; Harvey, Richard L; Roth, Elliot J; Zhang, Li-Qun

2013-01-01

To investigate the effects of controlled passive stretching and active movement training using a portable rehabilitation robot on stroke survivors with ankle and mobility impairment. Twenty-four patients at least 3 months post stroke were assigned to receive 6 week training using the portable robot in a research laboratory (robot group) or an instructed exercise program at home (control group). All patients underwent clinical and biomechanical evaluations in the laboratory at pre-evaluation, post-evaluation, and 6-week follow-up. Subjects in the robot group improved significantly more than that in the control group in reduction in spasticity measured by modified Ashworth scale, mobility by Stroke Rehabilitation Assessment of Movement (STREAM), the balance by Berg balance score, dorsiflexion passive range of motion, dorsiflexion strength, and load bearing on the affected limb during gait after 6-week training. Both groups improved in the STREAM, dorsiflexion active range of motion and dorsiflexor strength after the training, which were retained in the follow-up evaluation. Robot-assisted passive stretching and active movement training is effective in improving motor function and mobility post stroke.

A 4-Week Neuromuscular Training Program and Gait Patterns at the Ankle Joint

PubMed Central

Coughlan, Garrett; Caulfield, Brian

2007-01-01

Context: Previous research into the rehabilitation of ankle sprains has primarily focused on outcome measures that do not replicate functional activities, thus making it difficult to extrapolate the results relative to the weight-bearing conditions under which most ankle sprains occur. Objective: To measure the effects of a training program on gait during walking and running in an active athletic population. Design: Matched-pairs, controlled trial. Setting: University motion analysis laboratory. Patients or Other Participants: Ten subjects from an athletic population (7 healthy, 3 with functional ankle instability: age = 25.8 ± 3.9 years, height = 177.6 ± 6.1 cm, mass = 66.8 ± 7.4 kg) and 10 controls matched for age, sex, activity, and ankle instability (7 healthy, 3 with functional ankle instability: age = 27.4 ± 5.8 years, height = 178.7 ± 10.8 cm, mass = 71.6 ± 10.0 kg). Intervention(s): A 4-week neuromuscular training program undertaken by the treatment group. Main Outcome Measure(s): We measured ankle position and velocity in the frontal (x) and sagittal (y) planes in all subjects during treadmill walking and running for the periods 100 milliseconds before heel strike, at heel strike, and 100 milliseconds after heel strike. Results: A 4-week neuromuscular training program resulted in no significant changes in ankle position or velocity during treadmill walking and running. Conclusions: The mechanisms by which neuromuscular training improves function in normal subjects and those with functional ankle instability do not appear to result in measurable changes in gait kinematics. Our findings raise issues regarding methods of ankle sprain rehabilitation and the measurement of their effectiveness in improving functional activities. Further research in a larger population with functional ankle instability is necessary. PMID:17597944

Dynamics of gas-thrust bearings

NASA Technical Reports Server (NTRS)

Stiffler, A. K.; Tapia, R. R.

1978-01-01

Computer program calculates load coefficients, up to third harmonic, for hydrostatic gas thrust bearings. Program is useful in identification of industrial situations where gas-thrust bearings have potential applications.

Colleges and Universities with Degree or Certificate Bearing Programs in Creativity

ERIC Educational Resources Information Center

Yudess, Jo

2010-01-01

In this article, the author presents a list of colleges and universities with degree or certificate bearing programs in creativity. Since this focuses only on degree bearing programs, an individual might also focus on creativity by working with a specific faculty member in a more general program such as industrial-organizational psychology or…

Bearing tester data compilation, analysis, and reporting and bearing math modeling

NASA Technical Reports Server (NTRS)

1983-01-01

The Shaberth bearing analysis computer program was developed for the analysis of jet engine shaft/bearing systems operating above room temperature with normal hydrocarbon lubricants. It is also possible to use this tool to evaluate the shaft bearing systems operating in cryogenics. Effects such as fluid drag, radial temperature gradients, outer race misalignments and clearance changes were simulated and evaluated. In addition, the speed and preload effects on bearing radial stiffness was evaluated. The Shaberth program was also used to provide contact stresses from which contact geometry was calculated to support other analyses such as the determination of cryogenic fluid film thickness in the contacts and evaluation of surface and subsurface stresses necessary for bearing failure evaluation. This program was a vital tool for the thermal analysis of the bearing in that it provides the heat generation rates at the rolling element/race contacts for input into a thermal model of the bearing/shaft assembly.

7 CFR 761.53 - Interest bearing accounts.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Interest bearing accounts. 761.53 Section 761.53... AGRICULTURE SPECIAL PROGRAMS GENERAL PROGRAM ADMINISTRATION Supervised Bank Accounts § 761.53 Interest bearing accounts. (a) A supervised bank account, if possible, will be established as an interest bearing deposit...

76 FR 24713 - Cooperative Inspection Programs: Interstate Shipment of Meat and Poultry Products

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-02

...The Food Safety and Inspection Service (FSIS) is amending the Federal meat and poultry products inspection regulations to establish a new voluntary cooperative program under which State-inspected establishments with 25 or fewer employees will be eligible to ship meat and poultry products in interstate commerce. In participating States, State-inspected establishments selected to take part in this program will be required to comply with all Federal standards under the Federal Meat Inspection Act (FMIA) and the Poultry Products Inspection Act (PPIA). These establishments will receive inspection services from State inspection personnel that have been trained in the enforcement of the FMIA and PPIA. Meat and poultry products produced under the program that have been inspected and passed by designated State personnel will bear an official Federal mark of inspection and will be permitted to be distributed in interstate commerce. FSIS will provide oversight and enforcement of the program.

Computer Analysis Of High-Speed Roller Bearings

NASA Technical Reports Server (NTRS)

Coe, H.

1988-01-01

High-speed cylindrical roller-bearing analysis program (CYBEAN) developed to compute behavior of cylindrical rolling-element bearings at high speeds and with misaligned shafts. With program, accurate assessment of geometry-induced roller preload possible for variety of out-ring and housing configurations and loading conditions. Enables detailed examination of bearing performance and permits exploration of causes and consequences of bearing skew. Provides general capability for assessment of designs of bearings supporting main shafts of engines. Written in FORTRAN IV.

An analysis of the 70-meter antenna hydrostatic bearing by means of computer simulation

NASA Technical Reports Server (NTRS)

Bartos, R. D.

1993-01-01

Recently, the computer program 'A Computer Solution for Hydrostatic Bearings with Variable Film Thickness,' used to design the hydrostatic bearing of the 70-meter antennas, was modified to improve the accuracy with which the program predicts the film height profile and oil pressure distribution between the hydrostatic bearing pad and the runner. This article presents a description of the modified computer program, the theory upon which the computer program computations are based, computer simulation results, and a discussion of the computer simulation results.

Aerospace applications of magnetic bearings

NASA Technical Reports Server (NTRS)

Downer, James; Goldie, James; Gondhalekar, Vijay; Hockney, Richard

1994-01-01

Magnetic bearings have traditionally been considered for use in aerospace applications only where performance advantages have been the primary, if not only, consideration. Conventional wisdom has been that magnetic bearings have certain performance advantages which must be traded off against increased weight, volume, electric power consumption, and system complexity. These perceptions have hampered the use of magnetic bearings in many aerospace applications because weight, volume, and power are almost always primary considerations. This paper will review progress on several active aerospace magnetic bearings programs at SatCon Technology Corporation. The magnetic bearing programs at SatCon cover a broad spectrum of applications including: a magnetically-suspended spacecraft integrated power and attitude control system (IPACS), a magnetically-suspended momentum wheel, magnetic bearings for the gas generator rotor of a turboshaft engine, a vibration-attenuating magnetic bearing system for an airborne telescope, and magnetic bearings for the compressor of a space-rated heat pump system. The emphasis of these programs is to develop magnetic bearing technologies to the point where magnetic bearings can be truly useful, reliable, and well tested components for the aerospace community.

Aerospace applications of magnetic bearings

NASA Astrophysics Data System (ADS)

Downer, James; Goldie, James; Gondhalekar, Vijay; Hockney, Richard

1994-05-01

Magnetic bearings have traditionally been considered for use in aerospace applications only where performance advantages have been the primary, if not only, consideration. Conventional wisdom has been that magnetic bearings have certain performance advantages which must be traded off against increased weight, volume, electric power consumption, and system complexity. These perceptions have hampered the use of magnetic bearings in many aerospace applications because weight, volume, and power are almost always primary considerations. This paper will review progress on several active aerospace magnetic bearings programs at SatCon Technology Corporation. The magnetic bearing programs at SatCon cover a broad spectrum of applications including: a magnetically-suspended spacecraft integrated power and attitude control system (IPACS), a magnetically-suspended momentum wheel, magnetic bearings for the gas generator rotor of a turboshaft engine, a vibration-attenuating magnetic bearing system for an airborne telescope, and magnetic bearings for the compressor of a space-rated heat pump system. The emphasis of these programs is to develop magnetic bearing technologies to the point where magnetic bearings can be truly useful, reliable, and well tested components for the aerospace community.

Adaptive fault feature extraction from wayside acoustic signals from train bearings

NASA Astrophysics Data System (ADS)

Zhang, Dingcheng; Entezami, Mani; Stewart, Edward; Roberts, Clive; Yu, Dejie

2018-07-01

Wayside acoustic detection of train bearing faults plays a significant role in maintaining safety in the railway transport system. However, the bearing fault information is normally masked by strong background noises and harmonic interferences generated by other components (e.g. axles and gears). In order to extract the bearing fault feature information effectively, a novel method called improved singular value decomposition (ISVD) with resonance-based signal sparse decomposition (RSSD), namely the ISVD-RSSD method, is proposed in this paper. A Savitzky-Golay (S-G) smoothing filter is used to filter singular vectors (SVs) in the ISVD method as an extension of the singular value decomposition (SVD) theorem. Hilbert spectrum entropy and a stepwise optimisation strategy are used to optimize the S-G filter's parameters. The RSSD method is able to nonlinearly decompose the wayside acoustic signal of a faulty train bearing into high and low resonance components, the latter of which contains bearing fault information. However, the high level of noise usually results in poor decomposition results from the RSSD method. Hence, the collected wayside acoustic signal must first be de-noised using the ISVD component of the ISVD-RSSD method. Next, the de-noised signal is decomposed by using the RSSD method. The obtained low resonance component is then demodulated with a Hilbert transform such that the bearing fault can be detected by observing Hilbert envelope spectra. The effectiveness of the ISVD-RSSD method is verified through both laboratory field-based experiments as described in the paper. The results indicate that the proposed method is superior to conventional spectrum analysis and ensemble empirical mode decomposition methods.

A Shift From Resilience to Human Performance Optimization in Special Operations Training: Advancements in Theory and Practice.

PubMed

Park, Gloria H; Messina, Lauren A; Deuster, Patricia A

Within the Department of Defense over the past decade, a focus on enhancing Warfighter resilience and readiness has increased. For Special Operation Forces (SOF), who bear unique burdens for training and deployment, programs like the Preservation of the Force and Family have been created to help support SOF and their family members in sustaining capabilities and enhancing resilience in the face of prolonged warfare. In this review, we describe the shift in focus from resilience to human performance optimization (HPO) and the benefits of human performance initiatives that include holistic fitness. We then describe strategies for advancing the application of HPO for future initiatives through tailoring and cultural adaptation, as well as advancing methods for measurement. By striving toward specificity and precision performance, SOF human performance programs can impact individual and team capabilities to a greater extent than in the past, as well as maintaining the well-being of SOF and their families across their careers and beyond. 2017.

Spur, helical, and spiral bevel transmission life modeling

NASA Technical Reports Server (NTRS)

Savage, Michael; Rubadeux, Kelly L.; Coe, Harold H.; Coy, John J.

1994-01-01

A computer program, TLIFE, which estimates the life, dynamic capacity, and reliability of aircraft transmissions, is presented. The program enables comparisons of transmission service life at the design stage for optimization. A variety of transmissions may be analyzed including: spur, helical, and spiral bevel reductions as well as series combinations of these reductions. The basic spur and helical reductions include: single mesh, compound, and parallel path plus revert star and planetary gear trains. A variety of straddle and overhung bearing configurations on the gear shafts are possible as is the use of a ring gear for the output. The spiral bevel reductions include single and dual input drives with arbitrary shaft angles. The program is written in FORTRAN 77 and has been executed both in the personal computer DOS environment and on UNIX workstations. The analysis may be performed in either the SI metric or the English inch system of units. The reliability and life analysis is based on the two-parameter Weibull distribution lives of the component gears and bearings. The program output file describes the overall transmission and each constituent transmission, its components, and their locations, capacities, and loads. Primary output is the dynamic capacity and 90-percent reliability and mean lives of the unit transmissions and the overall system which can be used to estimate service overhaul frequency requirements. Two examples are presented to illustrate the information available for single element and series transmissions.

Vibration computer programs E13101, E13102, E13104, and E13112 and application to the NERVA program. Project 187: Methodology documentation

NASA Technical Reports Server (NTRS)

Mironenko, G.

1972-01-01

Programs for the analyses of the free or forced, undamped vibrations of one or two elastically-coupled lumped parameter teams are presented. Bearing nonlinearities, casing and rotor distributed mass and elasticity, rotor imbalance, forcing functions, gyroscopic moments, rotary inertia, and shear and flexural deformations are all included in the system dynamics analysis. All bearings have nonlinear load displacement characteristics, the solution is achieved by iteration. Rotor imbalances allowed by such considerations as pilot tolerances and runouts as well as bearing clearances (allowing concail or cylindrical whirl) determine the forcing function magnitudes. The computer programs first obtain a solution wherein the bearings are treated as linear springs of given spring rates. Then, based upon the computed bearing reactions, new spring rates are predicted and another solution of the modified system is made. The iteration is continued until the changes to bearing spring rates and bearing reactions become negligibly small.

Gender differences in knee abduction during weight-bearing activities: A systematic review and meta-analysis.

PubMed

Cronström, Anna; Creaby, Mark W; Nae, Jenny; Ageberg, Eva

2016-09-01

Increased knee abduction during weight-bearing activities is suggested to be a contributing factor for the high knee injury risk reported in women. However, studies investigating gender difference in knee abduction are inconclusive. To systematically review gender-differences in knee abduction during weight-bearing activities in individuals with or without knee injury. A systematic review and meta-analysis were conducted according to the PRISMA guidelines. A search in the databases Medline, CINAHL and EMBASE was performed until September 2015. Inclusion criteria were studies that reported (1) gender differences, (2) healthy individuals and/or those with anterior cruciate ligament (ACL) deficiency or reconstruction or patellofemoral pain PFP, and (3) knee abduction assessed with either motion analysis or visual observation during weight-bearing activity. Fifty-eight articles met the inclusion criteria. Women with PFP had greater peak knee abduction compared to men (Std diff in mean; -1.34, 95%CI; -1.83 to -0.84). In healthy individuals, women performed weight-bearing tasks with greater knee abduction throughout the movement (initial contact, peak abduction, excursion) (Std diff in mean; -0.68 to -0.79, 95%CI; -1.04 to -0.37). In subgroup analyses by task, differences in knee abduction between genders were present for most tasks, including running, jump landings and cutting movements. There were too few studies in individuals with ACL injury to perform meta-analysis. The gender difference in knee abduction during weight-bearing activities should be considered in training programs aimed at preventing or treating knee injury. Copyright © 2016 Elsevier B.V. All rights reserved.

Prostate Cancer Ambassadors: Process and Outcomes of a Prostate Cancer Informed Decision-Making Training Program.

PubMed

Vines, Anissa I; Hunter, Jaimie C; Carlisle, Veronica A; Richmond, Alan N

2016-04-19

African American men bear a higher burden of prostate cancer than Caucasian men, but knowledge about how to make an informed decision about prostate cancer screening is limited. A lay health advisor model was used to train "Prostate Cancer Ambassadors" on prostate cancer risk and symptoms, how to make an informed decision for prostate-specific antigen screening, and how to deliver the information to members of their community. Training consisted of two, 6-hour interactive sessions and was implemented in three predominantly African American communities over an 8-month period between 2013 and 2014. Following training, Ambassadors committed to contacting at least 10 people within 3 months using a toolkit composed of wallet-sized informational cards for distribution, a slide presentation, and a flip chart. Thirty-two Ambassadors were trained, with more than half being females (59%) and half reporting a family history of prostate cancer. Prostate cancer knowledge improved significantly among Ambassadors (p≤ .0001). Self-efficacy improved significantly for performing outreach tasks (p< .0001), and among women in helping a loved one with making an informed decision (p= .005). There was also an improvement in collective efficacy in team members (p= .0003). Twenty-nine of the Ambassadors fulfilled their commitment to reach at least 10 people (average number of contacts per Ambassador was 11). In total, 355 individuals were reached with the prostate cancer information. The Ambassador training program proved successful in training Ambassadors to reach communities about prostate cancer and how to make an informed decision about screening. © The Author(s) 2016.

Resistance exercise attenuates skeletal muscle oxidative stress, systemic pro-inflammatory state, and cachexia in Walker-256 tumor-bearing rats.

PubMed

Padilha, Camila Souza; Borges, Fernando Henrique; Costa Mendes da Silva, Lilian Eslaine; Frajacomo, Fernando Tadeu Trevisan; Jordao, Alceu Afonso; Duarte, José Alberto; Cecchini, Rubens; Guarnier, Flávia Alessandra; Deminice, Rafael

2017-09-01

The aim of this study was to investigate the effects of resistance exercise training (RET) on oxidative stress, systemic inflammatory markers, and muscle wasting in Walker-256 tumor-bearing rats. Male (Wistar) rats were divided into 4 groups: sedentary controls (n = 9), tumor-bearing (n = 9), exercised (n = 9), and tumor-bearing exercised (n = 10). Exercised and tumor-bearing exercised rats were exposed to resistance exercise of climbing a ladder apparatus with weights tied to their tails for 6 weeks. The physical activity of control and tumor-bearing rats was confined to the space of the cage. After this period, tumor-bearing and tumor-bearing exercised animals were inoculated subcutaneously with Walker-256 tumor cells (11.0 × 10 7 cells in 0.5 mL of phosphate-buffered saline) while control and exercised rats were injected with vehicle. Following inoculation, rats maintained resistance exercise training (exercised and tumor-bearing exercised) or sedentary behavior (control and tumor-bearing) for 12 more days, after which they were euthanized. Results showed muscle wasting in the tumor-bearing group, with body weight loss, increased systemic leukocytes, and inflammatory interleukins as well as muscular oxidative stress and reduced mTOR signaling. In contrast, RET in the tumor-bearing exercised group was able to mitigate the reduced body weight and muscle wasting with the attenuation of muscle oxidative stress and systemic inflammatory markers. RET also prevented loss of muscle strength associated with tumor development. RET, however, did not prevent the muscle proteolysis signaling via FBXO32 gene messenger RNA expression in the tumor-bearing group. In conclusion, RET performed prior tumor implantation prevents cachexia development by attenuating tumor-induced systemic pro-inflammatory condition with muscle oxidative stress and muscle damage.

Partnerships in Assessment: Auspicing in Action.

ERIC Educational Resources Information Center

Bateman, Andrea; Clayton, Berwyn

Auspicing in Australia's vocational education and training (VET) sector involves organizations entering into partnerships with registered training organizations (RTOs) to have the training and assessment they undertake recognized under the National Training Framework. RTOs bear responsibility for assuring the quality of the assessments conducted…

Biodynamic feedback training to assure learning partial load bearing on forearm crutches.

PubMed

Krause, Daniel; Wünnemann, Martin; Erlmann, Andre; Hölzchen, Timo; Mull, Melanie; Olivier, Norbert; Jöllenbeck, Thomas

2007-07-01

To examine how biodynamic feedback training affects the learning of prescribed partial load bearing (200N). Three pre-post experiments. Biomechanics laboratory in a German university. A volunteer sample of 98 uninjured subjects who had not used crutches recently. There were 24 subjects in experiment 1 (mean age, 23.2y); 64 in experiment 2 (mean age, 43.6y); and 10 in experiment 3 (mean age, 40.3y), parallelized by arm force. Video instruction and feedback training: In experiment 1, 2 varied instruction videos and reduced feedback frequency; in experiment 2, varied frequencies of changing tasks (contextual interference); and in experiment 3, feedback training (walking) and transfer (stair tasks). Vertical ground reaction force. Absolute error of practiced tasks was significantly reduced for all samples (P<.050). Varied contextual interference conditions did not significantly affect retention (P=.798) or transfer (P=.897). Positive transfer between tasks was significant in experiment 2 (P<.001) and was contrary to findings in experiment 3 (P=.071). Biodynamic feedback training is applicable for learning prescribed partial load bearing. The frequency of changing tasks is irrelevant. Despite some support for transfer effects, additional practice in climbing and descending stairs might be beneficial.

Effects of Long-term Physical Training on the Bearers of a Float during the Nagasaki Kunchi Festival.

PubMed

Shibata, Shigemori; Kawano, Hiroaki; Maemura, Koji

Objective The Nagasaki Kunchi Festival is one of the most famous festivals in Nagasaki. The bearers the floats that are used in this festival undergo long-term training for the performance. However, there have not been any studies on the effects of this training on the health of the float bearers. Methods Thirty-four men ranging in age from 20 to 49 years (mean age: 35.77.6 years) were included in the study. We examined the following parameters before and after the training: body weight (BW), body mass index (BMI), body fat percentage, muscle volume, systolic blood pressure (SBP), diastolic blood pressure (DBP), pulse rate (PR), pulse pressure (PP), bearing power, arterial pressure volume index (API), and arterial velocity pulse index (AVI). Results For all participants, the BW, BMI, body fat percentage, and PR were significantly decreased, and the muscle volume and bearing power were significantly increased after the training; however, there were no significant changes in the SBP, DBP, PP, API, or AVI. In the participants with hypertension, in addition to decreases in BW, BMI, body fat percentage, PR, and PP, the SBP, DBP, and API were significantly decreased after the training. Conclusion Training for bearing a float during Nagasaki Kunchi effectively improved the body structure of all participants and reduced the BP and API in participants with hypertension.

Effects of Long-term Physical Training on the Bearers of a Float during the Nagasaki Kunchi Festival

PubMed Central

Shibata, Shigemori; Kawano, Hiroaki; Maemura, Koji

2017-01-01

Objective The Nagasaki Kunchi Festival is one of the most famous festivals in Nagasaki. The bearers the floats that are used in this festival undergo long-term training for the performance. However, there have not been any studies on the effects of this training on the health of the float bearers. Methods Thirty-four men ranging in age from 20 to 49 years (mean age: 35.7±7.6 years) were included in the study. We examined the following parameters before and after the training: body weight (BW), body mass index (BMI), body fat percentage, muscle volume, systolic blood pressure (SBP), diastolic blood pressure (DBP), pulse rate (PR), pulse pressure (PP), bearing power, arterial pressure volume index (API), and arterial velocity pulse index (AVI). Results For all participants, the BW, BMI, body fat percentage, and PR were significantly decreased, and the muscle volume and bearing power were significantly increased after the training; however, there were no significant changes in the SBP, DBP, PP, API, or AVI. In the participants with hypertension, in addition to decreases in BW, BMI, body fat percentage, PR, and PP, the SBP, DBP, and API were significantly decreased after the training. Conclusion Training for bearing a float during Nagasaki Kunchi effectively improved the body structure of all participants and reduced the BP and API in participants with hypertension. PMID:28049988

Bearing development program for a 25 kWe solar-powered organic Rankine-cycle engine

NASA Technical Reports Server (NTRS)

Nesmith, B.

1985-01-01

The bearing development program is summarized for a 25-kWe power conversion subsystem (PCS) consisting of an organic Rankine-cycle engine, and permanent magnetic alternator (PMA) and rectifier to be used in a 100-kWe point-focusing distributed receiver solar power plant. The engine and alternator were hermetically sealed and used toluene as the working fluid. The turbine, alternator, and feed pump (TAP) were mounted on a single shaft operating at speeds up to 60,000 rev/min. Net thermal-to-electric efficiencies in the range of 21 to 23% were demonstrated at the maximum working fluid temperature of 400 C (750 F). A chronological summary of the bearing development program is presented. The primary causes of bearing wear problems were traced to a combination of rotordynamic instability and electrodynamic discharge across the bearing surfaces caused by recirculating currents from the PMA. These problems were resolved by implementing an externally supplied, flooded-bearing lubrication system and by electrically insulating all bearings from the TAP housing. This program resulted in the successful development of a stable, high-speed, toluene-lubricated five-pad tilting-pad journal bearing and Rayleigh step thrust bearing system capable of operating at all inclinations between horizontal and vertical.

Chinese approaches to understanding and building resilience in at-risk children and adolescents.

PubMed

Lee, Tak-Yan; Shek, Daniel T L; Kwong, Wai-Man

2007-04-01

This article discusses the prevailing Chinese belief systems that have bearings on the perception and practices of promoting resilience among children and youth in a major city in China. It briefly describes a huge social intervention program entitled "Understanding the Adolescent Project" to combat the problems among grade 7 students identified as adolescents at risk from 2001 to 2004 in Hong Kong Special Administrative Region. A critical review of the problems encountered by social workers in the delivery of the program is presented to support the move to provide the preventive program for grade 4 students with clinical symptoms on a screening tool for identification of at-risk status. Starting in 2005, a large-scale positive youth development program was being developed for all secondary one to three (grades 7 to 9) students. Encouraging results of the evaluation studies demonstrated the effectiveness of this new preventive program, entitled Positive Adolescent Training through Holistic Social Programs.

Bearing tester data compilation, analysis, and reporting and bearing math modeling

NASA Technical Reports Server (NTRS)

1986-01-01

A test condition data base was developed for the Bearing and Seal Materials Tester (BSMT) program which permits rapid retrieval of test data for trend analysis and evaluation. A model was developed for the Space shuttle Main Engine (SSME) Liquid Oxygen (LOX) turbopump shaft/bearing system. The model was used to perform parametric analyses to determine the sensitivity of bearing operating characteristics and temperatures to variations in: axial preload, contact friction, coolant flow and subcooling, heat transfer coefficients, outer race misalignments, and outer race to isolator clearances. The bearing program ADORE (Advanced Dynamics of Rolling Elements) was installed on the UNIVAC 1100/80 computer system and is operational. ADORE is an advanced FORTRAN computer program for the real time simulation of the dynamic performance of rolling bearings. A model of the 57 mm turbine-end bearing is currently being checked out. Analyses were conducted to estimate flow work energy for several flow diverter configurations and coolant flow rates for the LOX BSMT.

Approaches to preparing young scholars for careers in interdisciplinary team science.

PubMed

Begg, Melissa D; Crumley, Gene; Fair, Alecia M; Martina, Camille A; McCormack, Wayne T; Merchant, Carol; Patino-Sutton, Cecilia M; Umans, Jason G

2014-01-01

To succeed as a biomedical researcher, the ability to flourish in interdisciplinary teams of scientists is becoming ever more important. Institutions supported by the Clinical and Translational Science Awards (CTSAs) from the National Institutes of Health have a specific mandate to educate the next generation of clinical and translational researchers. While they strive to advance integrated and interdisciplinary approaches to education and career development in clinical and translational science, general approaches and evaluation strategies may differ, as there is no single, universally accepted or standardized approach. It is important, therefore, to learn about the different approaches used to determine what is effective. We implemented a Web-based survey distributed to education leaders at the 60 funded CTSA institutions; 95% responded to the survey, which included questions on the importance of preparation for interdisciplinary team science careers, methods used to provide such training, and perceived effectiveness of these training programs. The vast majority (86%) of education leaders reported that such training is important, and about half (52%) of the institutions offer such training. Methods of training most often take the form of courses and seminars, both credit bearing and noncredit. These efforts are, by and large, perceived as effective by the training program leaders, although long-term follow-up of trainees would be required to fully evaluate ultimate effectiveness. Results from the survey suggest that CTSA education directors believe that specific training in interdisciplinary team science for young investigators is very important, but few methodologies are universally practiced in CTSA institutions to provide training or to assess performance. Four specific recommendations are suggested to provide measurable strategic goals for education in team science in the context of clinical and translational research.

Computer program for analysis of high speed, single row, angular contact, spherical roller bearing, SASHBEAN. Volume 2: Mathematical formulation and analysis

NASA Technical Reports Server (NTRS)

Aggarwal, Arun K.

1993-01-01

Spherical roller bearings have typically been used in applications with speeds limited to about 5000 rpm and loads limited for operation at less than about 0.25 million DN. However, spherical roller bearings are now being designed for high load and high speed applications including aerospace applications. A computer program, SASHBEAN, was developed to provide an analytical tool to design, analyze, and predict the performance of high speed, single row, angular contact (including zero contact angle), spherical roller bearings. The material presented is the mathematical formulation and analytical methods used to develop computer program SASHBEAN. For a given set of operating conditions, the program calculates the bearings ring deflections (axial and radial), roller deflections, contact areas stresses, depth and magnitude of maximum shear stresses, axial thrust, rolling element and cage rotational speeds, lubrication parameters, fatigue lives, and rates of heat generation. Centrifugal forces and gyroscopic moments are fully considered. The program is also capable of performing steady-state and time-transient thermal analyses of the bearing system.

NASA/Army Rotorcraft Transmission Research, a Review of Recent Significant Accomplishments

NASA Technical Reports Server (NTRS)

Krantz, Timothy L.

1994-01-01

A joint helicopter transmission research program between NASA Lewis Research Center and the U.S. Army Research Lab has existed since 1970. Research goals are to reduce weight and noise while increasing life, reliability, and safety. These research goals are achieved by the NASA/Army Mechanical Systems Technology Branch through both in-house research and cooperative research projects with university and industry partners. Some recent significant technical accomplishments produced by this cooperative research are reviewed. The following research projects are reviewed: oil-off survivability of tapered roller bearings, design and evaluation of high contact ratio gearing, finite element analysis of spiral bevel gears, computer numerical control grinding of spiral bevel gears, gear dynamics code validation, computer program for life and reliability of helicopter transmissions, planetary gear train efficiency study, and the Advanced Rotorcraft Transmission (ART) program.

Evaluation of ball and roller bearings restored by grinding

NASA Technical Reports Server (NTRS)

Parker, R. J.; Zaretsky, E. V.; Chen, S. M.

1976-01-01

A joint program was undertaken to restore by grinding those rolling-element bearings which are currently being discarded at aircraft engine and transmission overhaul. Three bearing types were selected from the UH-1 helicopter engine (T-53) and transmission for the pilot program. Groups of each of these bearings were visually and dimensionally inspected for suitability for restoration. A total of 250 bearings were restored by grinding. Of this number, 30 bearings from each type were endurance tested to a TBO of 1600 hours. No bearing failures occurred related to the restoration by grinding process. The two bearing failures which occurred were due to defective rolling elements and were typical of those which may occur in new bearings. The restorable component yield to the three groups was in excess of 90 percent.

Variation of Extreme and Fatigue Design Loads on the Main Bearing of a Front Mounted Direct Drive System

NASA Astrophysics Data System (ADS)

Abrahamsen, Asger Bech; Natarajan, Anand

2016-09-01

The drivetrain of a 10 MW wind turbine has been designed as a direct drive transmission with a superconducting generator mounted in front of the hub and connected to the main frame through a King-pin stiff assembly by DNV-GL. The aeroelastic design loads of such an arrangement are evaluated based on the thrust and bending moments at the main bearing, both for ultimate design and in fatigue. It is found that the initial superconductor generator weight of 363 tons must be reduced by 25% in order not to result in higher extreme loads on main and yaw bearing than the reference10 MW geared reference drive train. A weight reduction of 50% is needed in order to maintain main bearing fatigue damage equivalent to the reference drive train. Thus a target mass of front mounted superconducting direct drive generators is found to be between 183-272 tons.

A better sequence-read simulator program for metagenomics.

PubMed

Johnson, Stephen; Trost, Brett; Long, Jeffrey R; Pittet, Vanessa; Kusalik, Anthony

2014-01-01

There are many programs available for generating simulated whole-genome shotgun sequence reads. The data generated by many of these programs follow predefined models, which limits their use to the authors' original intentions. For example, many models assume that read lengths follow a uniform or normal distribution. Other programs generate models from actual sequencing data, but are limited to reads from single-genome studies. To our knowledge, there are no programs that allow a user to generate simulated data following non-parametric read-length distributions and quality profiles based on empirically-derived information from metagenomics sequencing data. We present BEAR (Better Emulation for Artificial Reads), a program that uses a machine-learning approach to generate reads with lengths and quality values that closely match empirically-derived distributions. BEAR can emulate reads from various sequencing platforms, including Illumina, 454, and Ion Torrent. BEAR requires minimal user input, as it automatically determines appropriate parameter settings from user-supplied data. BEAR also uses a unique method for deriving run-specific error rates, and extracts useful statistics from the metagenomic data itself, such as quality-error models. Many existing simulators are specific to a particular sequencing technology; however, BEAR is not restricted in this way. Because of its flexibility, BEAR is particularly useful for emulating the behaviour of technologies like Ion Torrent, for which no dedicated sequencing simulators are currently available. BEAR is also the first metagenomic sequencing simulator program that automates the process of generating abundances, which can be an arduous task. BEAR is useful for evaluating data processing tools in genomics. It has many advantages over existing comparable software, such as generating more realistic reads and being independent of sequencing technology, and has features particularly useful for metagenomics work.

A Doppler Transient Model Based on the Laplace Wavelet and Spectrum Correlation Assessment for Locomotive Bearing Fault Diagnosis

PubMed Central

Shen, Changqing; Liu, Fang; Wang, Dong; Zhang, Ao; Kong, Fanrang; Tse, Peter W.

2013-01-01

The condition of locomotive bearings, which are essential components in trains, is crucial to train safety. The Doppler effect significantly distorts acoustic signals during high movement speeds, substantially increasing the difficulty of monitoring locomotive bearings online. In this study, a new Doppler transient model based on the acoustic theory and the Laplace wavelet is presented for the identification of fault-related impact intervals embedded in acoustic signals. An envelope spectrum correlation assessment is conducted between the transient model and the real fault signal in the frequency domain to optimize the model parameters. The proposed method can identify the parameters used for simulated transients (periods in simulated transients) from acoustic signals. Thus, localized bearing faults can be detected successfully based on identified parameters, particularly period intervals. The performance of the proposed method is tested on a simulated signal suffering from the Doppler effect. Besides, the proposed method is used to analyze real acoustic signals of locomotive bearings with inner race and outer race faults, respectively. The results confirm that the periods between the transients, which represent locomotive bearing fault characteristics, can be detected successfully. PMID:24253191

A Doppler transient model based on the laplace wavelet and spectrum correlation assessment for locomotive bearing fault diagnosis.

PubMed

Shen, Changqing; Liu, Fang; Wang, Dong; Zhang, Ao; Kong, Fanrang; Tse, Peter W

2013-11-18

The condition of locomotive bearings, which are essential components in trains, is crucial to train safety. The Doppler effect significantly distorts acoustic signals during high movement speeds, substantially increasing the difficulty of monitoring locomotive bearings online. In this study, a new Doppler transient model based on the acoustic theory and the Laplace wavelet is presented for the identification of fault-related impact intervals embedded in acoustic signals. An envelope spectrum correlation assessment is conducted between the transient model and the real fault signal in the frequency domain to optimize the model parameters. The proposed method can identify the parameters used for simulated transients (periods in simulated transients) from acoustic signals. Thus, localized bearing faults can be detected successfully based on identified parameters, particularly period intervals. The performance of the proposed method is tested on a simulated signal suffering from the Doppler effect. Besides, the proposed method is used to analyze real acoustic signals of locomotive bearings with inner race and outer race faults, respectively. The results confirm that the periods between the transients, which represent locomotive bearing fault characteristics, can be detected successfully.

Trackside acoustic diagnosis of axle box bearing based on kurtosis-optimization wavelet denoising

NASA Astrophysics Data System (ADS)

Peng, Chaoyong; Gao, Xiaorong; Peng, Jianping; Wang, Ai

2018-04-01

As one of the key components of railway vehicles, the operation condition of the axle box bearing has a significant effect on traffic safety. The acoustic diagnosis is more suitable than vibration diagnosis for trackside monitoring. The acoustic signal generated by the train axle box bearing is an amplitude modulation and frequency modulation signal with complex train running noise. Although empirical mode decomposition (EMD) and some improved time-frequency algorithms have proved to be useful in bearing vibration signal processing, it is hard to extract the bearing fault signal from serious trackside acoustic background noises by using those algorithms. Therefore, a kurtosis-optimization-based wavelet packet (KWP) denoising algorithm is proposed, as the kurtosis is the key indicator of bearing fault signal in time domain. Firstly, the geometry based Doppler correction is applied to signals of each sensor, and with the signal superposition of multiple sensors, random noises and impulse noises, which are the interference of the kurtosis indicator, are suppressed. Then, the KWP is conducted. At last, the EMD and Hilbert transform is applied to extract the fault feature. Experiment results indicate that the proposed method consisting of KWP and EMD is superior to the EMD.

Modeling guidance and recognition in categorical search: bridging human and computer object detection.

PubMed

Zelinsky, Gregory J; Peng, Yifan; Berg, Alexander C; Samaras, Dimitris

2013-10-08

Search is commonly described as a repeating cycle of guidance to target-like objects, followed by the recognition of these objects as targets or distractors. Are these indeed separate processes using different visual features? We addressed this question by comparing observer behavior to that of support vector machine (SVM) models trained on guidance and recognition tasks. Observers searched for a categorically defined teddy bear target in four-object arrays. Target-absent trials consisted of random category distractors rated in their visual similarity to teddy bears. Guidance, quantified as first-fixated objects during search, was strongest for targets, followed by target-similar, medium-similarity, and target-dissimilar distractors. False positive errors to first-fixated distractors also decreased with increasing dissimilarity to the target category. To model guidance, nine teddy bear detectors, using features ranging in biological plausibility, were trained on unblurred bears then tested on blurred versions of the same objects appearing in each search display. Guidance estimates were based on target probabilities obtained from these detectors. To model recognition, nine bear/nonbear classifiers, trained and tested on unblurred objects, were used to classify the object that would be fixated first (based on the detector estimates) as a teddy bear or a distractor. Patterns of categorical guidance and recognition accuracy were modeled almost perfectly by an HMAX model in combination with a color histogram feature. We conclude that guidance and recognition in the context of search are not separate processes mediated by different features, and that what the literature knows as guidance is really recognition performed on blurred objects viewed in the visual periphery.

Modeling guidance and recognition in categorical search: Bridging human and computer object detection

PubMed Central

Zelinsky, Gregory J.; Peng, Yifan; Berg, Alexander C.; Samaras, Dimitris

2013-01-01

Search is commonly described as a repeating cycle of guidance to target-like objects, followed by the recognition of these objects as targets or distractors. Are these indeed separate processes using different visual features? We addressed this question by comparing observer behavior to that of support vector machine (SVM) models trained on guidance and recognition tasks. Observers searched for a categorically defined teddy bear target in four-object arrays. Target-absent trials consisted of random category distractors rated in their visual similarity to teddy bears. Guidance, quantified as first-fixated objects during search, was strongest for targets, followed by target-similar, medium-similarity, and target-dissimilar distractors. False positive errors to first-fixated distractors also decreased with increasing dissimilarity to the target category. To model guidance, nine teddy bear detectors, using features ranging in biological plausibility, were trained on unblurred bears then tested on blurred versions of the same objects appearing in each search display. Guidance estimates were based on target probabilities obtained from these detectors. To model recognition, nine bear/nonbear classifiers, trained and tested on unblurred objects, were used to classify the object that would be fixated first (based on the detector estimates) as a teddy bear or a distractor. Patterns of categorical guidance and recognition accuracy were modeled almost perfectly by an HMAX model in combination with a color histogram feature. We conclude that guidance and recognition in the context of search are not separate processes mediated by different features, and that what the literature knows as guidance is really recognition performed on blurred objects viewed in the visual periphery. PMID:24105460

Design and fabrication of prototype system for early warning of impending bearing failure

NASA Technical Reports Server (NTRS)

Meacher, J.; Chen, H. M.

1974-01-01

A test program was conducted with the objective of developing a method and equipment for on-line monitoring of installed ball bearings to detect deterioration or impending failure of the bearings. The program was directed at the spin-axis bearings of a control moment gyro. The bearings were tested at speeds of 6000 and 8000 rpm, thrust loads from 50 to 1000 pounds, with a wide range of lubrication conditions, with and without a simulated fatigue spall implanted in the inner race ball track. It was concluded that a bearing monitor system based on detection and analysis of modulations of a fault indicating bearing resonance frequency can provide a low threshold of sensitivity.

Ready to sell our program. Anybody who is interested in learning Indonesian experience is invited to take part in the BKKBN's international training program.

PubMed

Suyono, H

1996-01-01

The Indonesian Family Planning Program was officially launched in 1970 when President Suharto developed the National Family Planning Coordinating Board (BKKBN) to administrate the national family planning program. The inauguration of the family planning program came at the heels of a special demand by the people with very strong support of the ulama. The program was subsequently developed and expanded into remote areas in 1976. In 1992, a family-based approach to family planning was implemented in which every village family was made responsible for family planning. The program is based upon a very strong political commitment at the highest level as well as at the provincial, district, subdistrict, and village levels; it continuously innovates; every community can name its family planning program as it likes; and there is constant feedback to the community. Indonesia's family planning program strategies are as follows: it is suggested that couples in which the wife is aged 20-30 years have only two children; it is recommended that women over age 30 have no more children due to the comparatively high risks of pregnancy at that age; considerable effort is given to encourage youths to not become pregnant and bear children; numerous chairmen of small community family planning groups are appointed; and social and cultural conditions have been created in which people work for family planning activities. People interested in learning from the Indonesian experience in family planning may participate in the BKKBN's international training program.

Evaluation of rotating, incompressibly lubricated, pressurized thrust bearings

NASA Technical Reports Server (NTRS)

Fleming, D. P.

1971-01-01

Program evaluates a series hybrid, fluid film ball bearing consisting of an orifice compensated pressurized thrust bearing in conjunction with a self-acting journal bearing. Oil viscosities corresponding to experimentally measured ball bearing outer-race temperatures were used.

Automated Assistance for Designing Active Magnetic Bearings

NASA Technical Reports Server (NTRS)

Imlach, Joseph

2008-01-01

MagBear12 is a computer code that assists in the design of radial, heteropolar active magnetic bearings (AMBs). MagBear12 was developed to help in designing the system described in "Advanced Active-Magnetic-Bearing Thrust-Measurement System". Beyond this initial application, MagBear12 is expected to be useful for designing AMBs for a variety of rotating machinery. This program incorporates design rules and governing equations that are also implemented in other, proprietary design software used by AMB manufacturers. In addition, this program incorporates an advanced unpublished fringing-magnetic-field model that increases accuracy beyond that offered by the other AMB-design software.

Scaling up specialist training in developing countries: lessons learned from the first 12 years of regional postgraduate training in Fiji – a case study

PubMed Central

2012-01-01

Background In 1997, regional specialist training was established in Fiji, consisting of one-year Postgraduate Diplomas followed by three-year master’s degree programs in anesthesia, internal medicine, obstetrics/gynecology, pediatrics and surgery. The evolution of these programs during the first 12 years is presented. Case description A case study utilizing mixed methods was carried out, including a prospective collection of enrolment and employment data, supplemented by semi-structured interviews. Between 1997 and 2009, 207 doctors (113 from Fiji and 94 from 13 other countries or territories in the Pacific) trained to at least the Postgraduate Diploma level. For Fiji graduates, 29.2% migrated permanently to developed countries, compared to only 8.5% for regional graduates (P <0.001). Early years of the program were characterized by large intakes and enthusiasm, but also uncertainty. Many resignations took place following a coup d’etat in 2000. By 2005, interviews suggested a dynamic of political instability initially leading to resignations, leading to even heavier workloads, compounded by academic studies that seemed unlikely to lead to career benefit. This was associated with loss of hope and downward spirals of further resignations. After 2006, however, Master’s graduates generally returned from overseas placements, had variable success in career progression, and were able to engage in limited private practice. Enrolments and retention stabilized and increased. Discussion and evaluation Over time, all specialties have had years when the viability and future of the programs were in question, but all have recovered to varying degrees, and the programs continue to evolve and strengthen. Prospective clarification of expected career outcomes for graduates, establishment of career pathways for diploma-only graduates, and balancing desires for academic excellence with workloads that trainees were able to bear may have lessened ongoing losses of trainees and graduates. Conclusions Despite early losses of trainees, the establishment of regional postgraduate training in Fiji is having an increasingly positive impact on the specialist workforce in the Pacific. With forethought, many of the difficulties we encountered may have been avoidable. Our experiences may help others who are establishing or expanding postgraduate training in developing countries to optimize the benefit of postgraduate training on their national and regional workforces. PMID:23270525

High Speed Cylindrical Roller Bearing Analysis, SKF Computer Program CYBEAN. Volume 1: Analysis

NASA Technical Reports Server (NTRS)

Kleckner, R. J.; Pirvics, J.

1978-01-01

The CYBEAN (CYlindrical BEaring ANalysis) program was created to detail radially loaded, aligned and misaligned Cylindrical roller bearing performance under a variety of operating conditions. The models and associated mathematics used within CYBEAN are described. The user is referred to the material for formulation assumptions and algorithm detail.

Seasonal and individual variation in the use of rail-associated food attractants by grizzly bears (Ursus arctos) in a national park.

PubMed

Murray, Maureen H; Fassina, Sarah; Hopkins, John B; Whittington, Jesse; St Clair, Colleen C

2017-01-01

Similar to vehicles on roadways, trains frequently kill wildlife via collisions along railways. Despite the prevalence of this mortality worldwide, little is known about the relative importance of wildlife attractants associated with railways, including spilled agricultural products, enhanced vegetation, invertebrates, and carcasses of rail-killed ungulates. We assessed the relative importance of several railway attractants to a provincially-threatened population of grizzly bears (Ursus arctos) in Banff and Yoho National Parks, Canada, for which rail-caused mortality has increased in recent decades without known cause. We examined the relationship between the use of the railway and diet by fitting 21 grizzly bears with GPS collars in 2011-2013 and measuring the stable isotope values (δ15N, δ34S) derived from their hair. We also examined the importance of rail-associated foods to grizzly bears by analyzing 230 grizzly bear scats collected from May through October in 2012-2014, some of which could be attributed to GPS-collared bears. Among the 21 collared bears, 17 used the rail rarely (<9% of the days they were monitored), and only four bears (which included the three smallest bears and the largest bear in our sample) used the rail frequently (>20% of their monitored days). We found no significant relationships between δ15N and δ34S values measured from the hair of grizzlies and their frequency of rail use. Instead, δ15N increased with body mass, especially for male bears, suggesting large males consumed more animal protein during hair growth. All four bears that used the railway frequently produced scats containing grain. Almost half the scats (43%) collected within 150 m of the railway contained grain compared to only 7% of scats found >150 m from the railway. Scats deposited near the rail were also more likely to contain grain in the fall (85% of scats) compared to summer (14%) and spring (17%), and those containing grain were more diverse in their contents (6.8 ± 2.2 species vs. 4.9 ± 1.6, P < 0.001). Lastly, scats collected near the rail were more likely to contain ungulate hair and ant remains, especially in the summer. Our results support local management knowledge that some bears in the region use the railway to forage and supplement their diets with spilled grain, but that individual use of the railway and associated foods were highly variable. We suggest that managers continue to reduce the risk of bears being killed by trains by reactively removing grain and ungulate carcasses from the railway, reducing the amount of grain spilled by trains, and target mitigation to the specific individuals and locations that attract recurrent rail-based foraging.

Seasonal and individual variation in the use of rail-associated food attractants by grizzly bears (Ursus arctos) in a national park

PubMed Central

Fassina, Sarah; Hopkins, John B.; Whittington, Jesse; St. Clair, Colleen C.

2017-01-01

Similar to vehicles on roadways, trains frequently kill wildlife via collisions along railways. Despite the prevalence of this mortality worldwide, little is known about the relative importance of wildlife attractants associated with railways, including spilled agricultural products, enhanced vegetation, invertebrates, and carcasses of rail-killed ungulates. We assessed the relative importance of several railway attractants to a provincially-threatened population of grizzly bears (Ursus arctos) in Banff and Yoho National Parks, Canada, for which rail-caused mortality has increased in recent decades without known cause. We examined the relationship between the use of the railway and diet by fitting 21 grizzly bears with GPS collars in 2011–2013 and measuring the stable isotope values (δ15N, δ34S) derived from their hair. We also examined the importance of rail-associated foods to grizzly bears by analyzing 230 grizzly bear scats collected from May through October in 2012–2014, some of which could be attributed to GPS-collared bears. Among the 21 collared bears, 17 used the rail rarely (<9% of the days they were monitored), and only four bears (which included the three smallest bears and the largest bear in our sample) used the rail frequently (>20% of their monitored days). We found no significant relationships between δ15N and δ34S values measured from the hair of grizzlies and their frequency of rail use. Instead, δ15N increased with body mass, especially for male bears, suggesting large males consumed more animal protein during hair growth. All four bears that used the railway frequently produced scats containing grain. Almost half the scats (43%) collected within 150 m of the railway contained grain compared to only 7% of scats found >150 m from the railway. Scats deposited near the rail were also more likely to contain grain in the fall (85% of scats) compared to summer (14%) and spring (17%), and those containing grain were more diverse in their contents (6.8 ± 2.2 species vs. 4.9 ± 1.6, P < 0.001). Lastly, scats collected near the rail were more likely to contain ungulate hair and ant remains, especially in the summer. Our results support local management knowledge that some bears in the region use the railway to forage and supplement their diets with spilled grain, but that individual use of the railway and associated foods were highly variable. We suggest that managers continue to reduce the risk of bears being killed by trains by reactively removing grain and ungulate carcasses from the railway, reducing the amount of grain spilled by trains, and target mitigation to the specific individuals and locations that attract recurrent rail-based foraging. PMID:28542218

Individual effects of seasonal changes, visitor density, and concurrent bear behavior on stereotypical behaviors in captive polar bears (Ursus maritimus).

PubMed

Kelly, Krista R; Harrison, Michelle L; Size, Daniele D; MacDonald, Suzanne E

2015-01-01

Stereotypical behaviors in captive polar bears (Ursus maritimus) can be detrimental to their welfare. These behaviors can be reduced through enrichment programs but are often not completely eliminated, so identifying potential triggers is important. The present study investigated the influences of seasonal changes, visitor density, and concurrent bear activity on stereotypical behaviors exhibited by 3 captive polar bears at the Toronto Zoo. All bears exhibited these behaviors; however, individual differences were found in duration and form. The male exhibited less stereotypical behavior during spring, and the females exhibited less stereotypical behavior during winter. An increase in visitor density was associated with more stereotypical behavior in 1 female but less stereotypical behavior in the other 2 bears. All bears engaged in more stereotypical behaviors when the other bears were inactive, and 1 female engaged in more stereotypical behaviors when the other bears were out of sight. Further, when conspecifics were active, all bears engaged in less stereotypical behaviors. Given the variability among individual bears, future enrichment programs must be tailored to the needs of individuals to maximize efficacy.

Aerobic Exercise Training Attenuates Tumor Growth and Reduces Insulin Secretion in Walker 256 Tumor-Bearing Rats

PubMed Central

Moreira, Veridiana Mota; da Silva Franco, Claudinéia Conationi; Prates, Kelly Valério; Gomes, Rodrigo Mello; de Moraes, Ana Maria Praxedes; Ribeiro, Tatiane Aparecida; Martins, Isabela Peixoto; Previate, Carina; Pavanello, Audrei; Matiusso, Camila Cristina Ianoni; Almeida, Douglas Lopes; Francisco, Flávio Andrade; Malta, Ananda; Tófolo, Laize Peron; da Silva Silveira, Sandra; Saavedra, Lucas Paulo Jacinto; Machado, Katia; da Silva, Paulo Henrique Olivieri; Fabrício, Gabriel S.; Palma-Rigo, Kesia; de Souza, Helenir Medri; de Fátima Silva, Flaviane; Biazi, Giuliana Regina; Pereira, Taís Susane; Vieira, Elaine; Miranda, Rosiane Aparecida; de Oliveira, Júlio Cezar; da Costa Lima, Luiz Delmar; Rinaldi, Wilson; Ravanelli, Maria Ida; de Freitas Mathias, Paulo Cezar

2018-01-01

Aerobic exercise training can improve insulin sensitivity in many tissues; however, the relationship among exercise, insulin, and cancer cell growth is unclear. We tested the hypothesis that aerobic exercise training begun during adolescence can attenuate Walker 256 tumor growth in adult rats and alter insulin secretion. Thirty-day-old male Wistar rats engaged in treadmill running for 8 weeks, 3 days/week, 44 min/day, at 55–65% VO2max until they were 90 days old (TC, Trained Control). An equivalently aged group was kept inactive during the same period (SC, Sedentary Control). Then, half the animals of the SC and TC groups were reserved as the control condition and the other half were inoculated with Walker 256 cancer cells, yielding two additional groups (Sedentary Walker and Trained Walker). Zero mortalities were observed in tumor-bearing rats. Body weight (BW), food intake, plasma glucose, insulin levels, and peripheral insulin sensitivity were analyzed before and after tumor cell inoculation. We also evaluated tumor growth, metastasis and cachexia. Isolated pancreatic islets secretory activity was analyzed. In addition, we evaluated mechanic sensibility. Our results showed improved physical performance according to the final workload and VO2max and reduced BW in trained rats at the end of the running protocol. Chronic adaptation to the aerobic exercise training decreased tumor weight, cachexia and metastasis and were associated with low glucose and insulin levels and high insulin sensitivity before and after tumor cell inoculation. Aerobic exercise started at young age also reduced pancreatic islet insulin content and insulin secretion in response to a glucose stimulus, without impairing islet morphology in trained rats. Walker 256 tumor-bearing sedentary rats also presented reduced pancreatic islet insulin content, without changing insulin secretion through isolated pancreatic islets. The mechanical sensitivity test indicated that aerobic exercise training did not cause injury or trigger inflammatory processes prior to tumor cell inoculation. Taken together, the current study suggests that aerobic exercise training applied during adolescence may mitigate tumor growth and related disorders in Walker 256 tumor-bearing adult rats. Improved insulin sensibility, lower glucose and insulin levels and/or reduced insulin secretion stimulated by glucose may be implicated in this tumor attenuation.

Aerobic Exercise Training Attenuates Tumor Growth and Reduces Insulin Secretion in Walker 256 Tumor-Bearing Rats.

PubMed

Moreira, Veridiana Mota; da Silva Franco, Claudinéia Conationi; Prates, Kelly Valério; Gomes, Rodrigo Mello; de Moraes, Ana Maria Praxedes; Ribeiro, Tatiane Aparecida; Martins, Isabela Peixoto; Previate, Carina; Pavanello, Audrei; Matiusso, Camila Cristina Ianoni; Almeida, Douglas Lopes; Francisco, Flávio Andrade; Malta, Ananda; Tófolo, Laize Peron; da Silva Silveira, Sandra; Saavedra, Lucas Paulo Jacinto; Machado, Katia; da Silva, Paulo Henrique Olivieri; Fabrício, Gabriel S; Palma-Rigo, Kesia; de Souza, Helenir Medri; de Fátima Silva, Flaviane; Biazi, Giuliana Regina; Pereira, Taís Susane; Vieira, Elaine; Miranda, Rosiane Aparecida; de Oliveira, Júlio Cezar; da Costa Lima, Luiz Delmar; Rinaldi, Wilson; Ravanelli, Maria Ida; de Freitas Mathias, Paulo Cezar

2018-01-01

Aerobic exercise training can improve insulin sensitivity in many tissues; however, the relationship among exercise, insulin, and cancer cell growth is unclear. We tested the hypothesis that aerobic exercise training begun during adolescence can attenuate Walker 256 tumor growth in adult rats and alter insulin secretion. Thirty-day-old male Wistar rats engaged in treadmill running for 8 weeks, 3 days/week, 44 min/day, at 55-65% VO 2max until they were 90 days old (TC, Trained Control). An equivalently aged group was kept inactive during the same period (SC, Sedentary Control). Then, half the animals of the SC and TC groups were reserved as the control condition and the other half were inoculated with Walker 256 cancer cells, yielding two additional groups (Sedentary Walker and Trained Walker). Zero mortalities were observed in tumor-bearing rats. Body weight (BW), food intake, plasma glucose, insulin levels, and peripheral insulin sensitivity were analyzed before and after tumor cell inoculation. We also evaluated tumor growth, metastasis and cachexia. Isolated pancreatic islets secretory activity was analyzed. In addition, we evaluated mechanic sensibility. Our results showed improved physical performance according to the final workload and VO 2max and reduced BW in trained rats at the end of the running protocol. Chronic adaptation to the aerobic exercise training decreased tumor weight, cachexia and metastasis and were associated with low glucose and insulin levels and high insulin sensitivity before and after tumor cell inoculation. Aerobic exercise started at young age also reduced pancreatic islet insulin content and insulin secretion in response to a glucose stimulus, without impairing islet morphology in trained rats. Walker 256 tumor-bearing sedentary rats also presented reduced pancreatic islet insulin content, without changing insulin secretion through isolated pancreatic islets. The mechanical sensitivity test indicated that aerobic exercise training did not cause injury or trigger inflammatory processes prior to tumor cell inoculation. Taken together, the current study suggests that aerobic exercise training applied during adolescence may mitigate tumor growth and related disorders in Walker 256 tumor-bearing adult rats. Improved insulin sensibility, lower glucose and insulin levels and/or reduced insulin secretion stimulated by glucose may be implicated in this tumor attenuation.

Report on the biological monitoring program for Bear Creek at the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee, 1989-1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hinzman, R.L.; Beauchamp, J.J.; Cada, G.F.

1996-04-01

The Bear Creek Valley watershed drains the area surrounding several closed Oak Ridge Y-12 Plant waste disposal facilities. Past waste disposal practices in the Bear Creek Valley resulted in the contamination of Bear Creek and consequent ecological damage. Ecological monitoring by the Biological Monitoring and Abatement Program (BMAP) was initiated in the Bear Creek watershed in May 1984 and continues at present. Studies conducted during the first year provided a detailed characterization of the benthic invertebrate and fish communities in Bear Creek. The initial characterization was followed by a biological monitoring phase in which studies were conducted at reduced intensities.

Changes in skeletal muscle gene expression consequent to altered weight bearing

NASA Technical Reports Server (NTRS)

Booth, F. W.; Kirby, C. R.

1992-01-01

Skeletal muscle is a dynamic organ that adapts to alterations in weight bearing. This brief review examines changes in muscle gene expression resulting from the removal of weight bearing by hindlimb suspension and from increased weight bearing due to eccentric exercise. Acute (less than or equal to 2 days) non-weight bearing of adult rat soleus muscle alters only the translational control of muscle gene expression, while chronic (greater than or equal to 7 days) removal of weight bearing appears to influence pretranslational, translational, and posttranslational mechanisms of control. Acute and chronic eccentric exercise are associated with alterations of translational and posttranslational control, while chronic eccentric training also alters the pretranslational control of muscle gene expression. Thus alterations in weight bearing influence multiple sites of gene regulation.

Development of a Maintenance Advisor Expert System for the MK 92 MOD 2 Fire Control System: FC-1 Designation - Time, Range, Bearing FC-1 Acquisition, FC-1 Track - Range, Bearing, and FC-2 Designation - Time, Range, Bearing, FC-2 Acquisition, FC-2 Track - Range, Bearing, and FC-4 and FC-5

DTIC Science & Technology

1993-09-01

is not present at output of the power amplifier- THEN replace train drive motor ELSE continue troubleshooting procedures. 30 Rules offer several...Type Body Type Tires Tires Engine Type Engine Type Battery Type Battery Type Figure 5-2 KOWLEDGE ACCESS BY FRAME AND SLOT 33 B. SEMANTIC NETWORKS A

Rolling bearing fault diagnosis based on information fusion using Dempster-Shafer evidence theory

NASA Astrophysics Data System (ADS)

Pei, Di; Yue, Jianhai; Jiao, Jing

2017-10-01

This paper presents a fault diagnosis method for rolling bearing based on information fusion. Acceleration sensors are arranged at different position to get bearing vibration data as diagnostic evidence. The Dempster-Shafer (D-S) evidence theory is used to fuse multi-sensor data to improve diagnostic accuracy. The efficiency of the proposed method is demonstrated by the high speed train transmission test bench. The results of experiment show that the proposed method in this paper improves the rolling bearing fault diagnosis accuracy compared with traditional signal analysis methods.

Measuring Learning Resistance to Workplace Training

ERIC Educational Resources Information Center

Taylor, Jonathan E.; Lounsbury, John

2016-01-01

Training Transfer has been a topic bearing considerable mention over the past several decades. This article focuses on the connection between training transfer and learning resistance and presents research findings describing the design, creation, and testing of the Learning Efficiency Inventory (LEI). The LEI was designed to measure learning…

Reduction in bearing size due to superconductors in magnetic bearings

NASA Technical Reports Server (NTRS)

Rao, Dantam K.; Lewis, Paul; Dill, James F.

1991-01-01

A design concept that reduces the size of magnetic bearings is assessed. The small size will enable magnetic bearings to fit into limited available bearing volume of cryogenic machinery. The design concept, called SUPERC, uses (high Tc) superconductors or high-purity aluminum conductors in windings instead of copper. The relatively high-current density of these conductors reduces the slot radial thickness for windings, which reduces the size of the bearings. MTI developed a sizing program called SUPERC that translates the high-current density of these conductors into smaller sized bearings. This program was used to size a superconducting bearing to carry a 500 lb. load. The sizes of magnetic bearings needed by various design concepts are as follows: SUPERC design concept = 3.75 in.; magnet-bias design concept = 5.25 in.; and all electromagnet design concept = 7.0 in. These results indicate that the SUPERC design concept can significantly reduce the size of the bearing. This reduction, in turn, reduces the weight and yields a lighter bearing. Since the superconductors have inherently near-zero resistance, they are also expected to save power needed for operation considerably.

Burn Education Awareness Recognition and Support (BEARS): a community-based juvenile firesetters assessment and treatment program.

PubMed

Bennett, B K; Gamelli, R L; Duchene, R C; Atkocaitis, D; Plunkett, J A

2004-01-01

In response to the continued staggering statistics of fires set by juveniles and the devastating personal and property costs that are associated with these fires, the Burn and Shock Trauma Institute of Loyola University Medical Center, in collaboration with the State Fire Marshal's Office; the Illinois Fire Safety Alliance; and representatives from the firefighting community, law enforcement, emergency medicine and mental health, came together to create the Burn Education Awareness Recognition and Support Program. Through financial grant support from the International Association of Firefighters, the Illinois Fire Safety Alliance, and other private donations, the Burn Education Awareness Recognition and Support Program is able to provide a free resource to anyone who is concerned about a child playing with fire. Specially trained firefighters assess each child using the tool developed by the Federal Emergency Management Agency. In 2002, we assessed 42 children; 29 of those children were referred through the courts. So far, none of the children treated in our program have returned to fire-setting behaviors.

Compliant Foil Journal Bearing Performance at Alternate Pressures and Temperatures

NASA Technical Reports Server (NTRS)

Bruckner, Robert J.; Puleo, Bernadette J.

2008-01-01

An experimental test program has been conducted to determine the highly loaded performance of current generation gas foil bearings at alternate pressures and temperatures. Typically foil bearing performance has been reported at temperatures relevant to turbomachinery applications but only at an ambient pressure of one atmosphere. This dearth of data at alternate pressures has motivated the current test program. Two facilities were used in the test program, the ambient pressure rig and the high pressure rig. The test program utilized a 35 mm diameter by 27 mm long foil journal bearing having an uncoated Inconel X-750 top foil running against a shaft with a PS304 coated journal. Load capacity tests were conducted at 3, 6, 9, 12, 15, 18, and 21 krpm at temperatures from 25 to 500 C and at pressures from 0.1 to 2.5 atmospheres. Results show an increase in load capacity with increased ambient pressure and a reduction in load capacity with increased ambient temperature. Below one-half atmosphere of ambient pressure a dramatic loss of load capacity is experienced. Additional lightly loaded foil bearing performance in nitrogen at 25 C and up to 48 atmospheres of ambient pressure has also been reported. In the lightly loaded region of operation the power loss increases for increasing pressure at a fixed load. Knowledge of foil bearing performance at operating conditions found within potential machine applications will reduce program development risk of future foil bearing supported turbomachines.

Acoustic Source Bearing Estimation (ASBE) computer program development

NASA Technical Reports Server (NTRS)

Wiese, Michael R.

1987-01-01

A new bearing estimation algorithm (Acoustic Source Analysis Technique - ASAT) and an acoustic analysis computer program (Acoustic Source Bearing Estimation - ASBE) are described, which were developed by Computer Sciences Corporation for NASA Langley Research Center. The ASBE program is used by the Acoustics Division/Applied Acoustics Branch and the Instrument Research Division/Electro-Mechanical Instrumentation Branch to analyze acoustic data and estimate the azimuths from which the source signals radiated. Included are the input and output from a benchmark test case.

Design, fabrication, and operation of a test rig for high-speed tapered-roller bearings

NASA Technical Reports Server (NTRS)

Signer, H. R.

1974-01-01

A tapered-roller bearing test machine was designed, fabricated and successfully operated at speeds to 20,000 rpm. Infinitely variable radial loads to 26,690 N (6,000 lbs.) and thrust loads to 53,380 N (12,000 lbs.) can be applied to test bearings. The machine instrumentation proved to have the accuracy and reliability required for parametric bearing performance testing and has the capability of monitoring all programmed test parameters at continuous operation during life testing. This system automatically shuts down a test if any important test parameter deviates from the programmed conditions, or if a bearing failure occurs. A lubrication system was developed as an integral part of the machine, capable of lubricating test bearings by external jets and by means of passages feeding through the spindle and bearing rings into the critical internal bearing surfaces. In addition, provisions were made for controlled oil cooling of inner and outer rings to effect the type of bearing thermal management that is required when testing at high speeds.

The Australian Way: Competency-Based Training in the Corporate Sector.

ERIC Educational Resources Information Center

Kellie, Deborah

1999-01-01

Examples from road construction, mining, and other Australian industries show that the corporate sector has responded slowly to the introduction of a national framework for competency-based training. As industry bears more of the costs of training, it has yet to see returns in terms of productivity gains. (SK)

River-Based Experiential Learning: the Bear River Fellows Program

NASA Astrophysics Data System (ADS)

Rosenberg, D. E.; Shirley, B.; Roark, M. F.

2012-12-01

The Department of Civil and Environmental Engineering, Outdoor Recreation, and Parks and Recreation programs at Utah State University (USU) have partnered to offer a new, unique river-based experiential learning opportunity for undergraduates called the Bear River Fellows Program. The program allows incoming freshmen Fellows to experience a river first hand during a 5-day/4-night river trip on the nearby Bear River two weeks before the start of their first Fall semester. As part of the program, Fellows will navigate the Bear River in canoes, camp along the banks, interact with local water and environmental managers, collect channel cross section, stream flow, vegetation cover, and topological complexity data, meet other incoming freshmen, interact with faculty and graduate students, develop boating and leadership skills, problem solve, and participate as full members of the trip team. Subsequently, Fellows will get paid as undergraduate researchers during their Fall and Spring Freshman semesters to analyze, synthesize, and present the field data they collect. The program is a collaborative effort between two USU academic units and the (non-academic) division of Student Services and supports a larger National Science Foundation funded environmental modelling and management project for the lower Bear River, Utah watershed. We have advertised the program via Facebook and emails to incoming USU freshmen, received 35 applications (60% women), and accepted 5 Fellows into the program (3 female and 2 male). The river trip departs August 14, 2012. The poster will overview the Bear River Fellows Program and present qualitative and preliminary outcomes emerging from the trip and Fellows' work through the Fall semester with the field data they collect. We will also undertake more rigorous and longer longitudinal quantitative evaluation of Program outcomes (for example, in problem-solving and leadership) both in Spring 2013 and in subsequent 2013 and 2014 offerings of the program.

Online Doppler Effect Elimination Based on Unequal Time Interval Sampling for Wayside Acoustic Bearing Fault Detecting System

PubMed Central

Ouyang, Kesai; Lu, Siliang; Zhang, Shangbin; Zhang, Haibin; He, Qingbo; Kong, Fanrang

2015-01-01

The railway occupies a fairly important position in transportation due to its high speed and strong transportation capability. As a consequence, it is a key issue to guarantee continuous running and transportation safety of trains. Meanwhile, time consumption of the diagnosis procedure is of extreme importance for the detecting system. However, most of the current adopted techniques in the wayside acoustic defective bearing detector system (ADBD) are offline strategies, which means that the signal is analyzed after the sampling process. This would result in unavoidable time latency. Besides, the acquired acoustic signal would be corrupted by the Doppler effect because of high relative speed between the train and the data acquisition system (DAS). Thus, it is difficult to effectively diagnose the bearing defects immediately. In this paper, a new strategy called online Doppler effect elimination (ODEE) is proposed to remove the Doppler distortion online by the introduced unequal interval sampling scheme. The steps of proposed strategy are as follows: The essential parameters are acquired in advance. Then, the introduced unequal time interval sampling strategy is used to restore the Doppler distortion signal, and the amplitude of the signal is demodulated as well. Thus, the restored Doppler-free signal is obtained online. The proposed ODEE method has been employed in simulation analysis. Ultimately, the ODEE method is implemented in the embedded system for fault diagnosis of the train bearing. The results are in good accordance with the bearing defects, which verifies the good performance of the proposed strategy. PMID:26343657

Modifications Of Hydrostatic-Bearing Computer Program

NASA Technical Reports Server (NTRS)

Hibbs, Robert I., Jr.; Beatty, Robert F.

1991-01-01

Several modifications made to enhance utility of HBEAR, computer program for analysis and design of hydrostatic bearings. Modifications make program applicable to more realistic cases and reduce time and effort necessary to arrive at a suitable design. Uses search technique to iterate on size of orifice to obtain required pressure ratio.

Astronaut Anna Fisher practices control of the RMS in a trainer

NASA Image and Video Library

1984-08-21

S84-40162 (21 Aug. 1984) --- Astronaut Anna L. Fisher controls the Remote Manipulator System (RMS) arm from inside the "orbiter" as part of her training program in the Johnson Space Center's Shuttle Mock-up and Integration Laboratory. Dr. Fisher, one of three mission specialists for mission 51-A, is inside the cabin portion of a trainer called the Manipulatory Development Facility (MDF). She is able to operate the arm in conjunction with an air bearing floor and to log a great deal of rehearsal time for her flight, on which the retrieval of a low-orbiting communications satellite is planned. Photo credit: NASA

Settlement mechanism of piled-raft foundation due to cyclic train loads and its countermeasure

NASA Astrophysics Data System (ADS)

Gu, Linlin; Ye, Guanlin; Wang, Zhen; Ling, Xianzhang; Zhang, Feng

2017-07-01

In this paper, numerical simulation with soil-water coupling finite element-finite difference (FE-FD) analysis is conducted to investigate the settlement and the excess pore water pressure (EPWP) of a piled-raft foundation due to cyclic high-speed (speed: 300km/h) train loading. To demonstrate the performance of this numerical simulation, the settlement and EPWP in the ground under the train loading within one month was calculated and confirmed by monitoring data, which shows that the change of the settlement and EPWP can be simulated well on the whole. In order to ensure the safety of train operation, countermeasure by the fracturing grouting is proposed. Two cases are analyzed, namely, grouting in No-4 softest layer and No-9 pile bearing layer respectively. It is found that fracturing grouting in the pile bearing layer (No-9 layer) has better effect on reducing the settlement.

Bearing Fault Diagnosis under Variable Speed Using Convolutional Neural Networks and the Stochastic Diagonal Levenberg-Marquardt Algorithm

PubMed Central

Tra, Viet; Kim, Jaeyoung; Kim, Jong-Myon

2017-01-01

This paper presents a novel method for diagnosing incipient bearing defects under variable operating speeds using convolutional neural networks (CNNs) trained via the stochastic diagonal Levenberg-Marquardt (S-DLM) algorithm. The CNNs utilize the spectral energy maps (SEMs) of the acoustic emission (AE) signals as inputs and automatically learn the optimal features, which yield the best discriminative models for diagnosing incipient bearing defects under variable operating speeds. The SEMs are two-dimensional maps that show the distribution of energy across different bands of the AE spectrum. It is hypothesized that the variation of a bearing’s speed would not alter the overall shape of the AE spectrum rather, it may only scale and translate it. Thus, at different speeds, the same defect would yield SEMs that are scaled and shifted versions of each other. This hypothesis is confirmed by the experimental results, where CNNs trained using the S-DLM algorithm yield significantly better diagnostic performance under variable operating speeds compared to existing methods. In this work, the performance of different training algorithms is also evaluated to select the best training algorithm for the CNNs. The proposed method is used to diagnose both single and compound defects at six different operating speeds. PMID:29211025

Development of improved high temperature seals and lubricants for downhole motors in geothermal applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

De La Fosse, P.H.; Black, A.D.; DiBona, B.G.

1983-01-01

A major limitation of downhole mud motors for geothermal drilling, as well as straight-hole oil and gas drilling, is the bearing section. Reduced bearing life results from the inability to seal a lubricant in the bearing pack. A reliable rotary seal will extend the bearing life and will allow high pressure drops across the bit for improved bottomhole cleaning and increased drilling rate. This paper summarizes the results of a six-year program funded by the U.S. Department of Energy/Division of Geothermal Energy to develop a sealed bearing pack for use with downhole motors in geothermal applications. Descriptions of the Sealmore » Test Machine, Lubricant Test Machine and Bearing Pack Test Facility are presented. Summaries of all seal tests, lubricant tests and bearing pack tests are provided; and a comprehensive program bibliography is presented.« less

Effects of Game-Based Constraint-Induced Movement Therapy on Balance in Patients with Stroke: A Single-Blind Randomized Controlled Trial.

PubMed

Choi, Ho-Suk; Shin, Won-Seob; Bang, Dae-Hyouk; Choi, Sung-Jin

2017-03-01

The aims of this work were to determine whether game-based constraint-induced movement therapy (CIMT) is effective at improving balance ability in patients with stroke, and to provide clinical knowledge of game-based training that allows application of CIMT to the lower extremities. Thirty-six patients with chronic stroke were randomly assigned to game-based CIMT (n = 12), general game-based training (n = 12), and conventional (n = 12) groups. All interventions were conducted 3 times a week for 4 weeks. The static balance control and weight-bearing symmetry were assessed, and the Functional Reach Test (FRT), modified Functional Reach Test (mFRT), and Timed Up and Go (TUG) test were performed to evaluate balance ability. All 3 groups showed significant improvement in anterior-posterior axis (AP-axis) distance, sway area, weight-bearing symmetry, FRT, mFRT, and TUG test after the intervention (P < 0.05). Post hoc analysis revealed significant differences in AP-axis, and sway area, weight-bearing symmetry of the game-based CIMT group compared with the other group (P < 0.05). Although the general game-based training and the game-based CIMT both improved on static and dynamic balance ability, game-based CIMT had a larger effect on static balance control, weight-bearing symmetry, and side-to-side weight shift.

Effect of a walking skill training program in patients who have undergone total hip arthroplasty: Followup one year after surgery.

PubMed

Heiberg, Kristi Elisabeth; Bruun-Olsen, Vigdis; Ekeland, Arne; Mengshoel, Anne Marit

2012-03-01

To investigate the effect of a 12-session walking skill training program of weight-bearing activities on physical functioning and self-efficacy initiated in patients 3 months after total hip arthroplasty (THA). Sixty-eight patients with THA, 35 women and 33 men, with a mean age of 66 years (95% confidence interval [95% CI] 64, 67 years), were randomized to a training group (n = 35) or a control group without physiotherapy (n = 33). Assessments were performed before the intervention at 3 months (pretest), at 5 months (posttest 1), and at 12 months (posttest 2) after surgery. The primary outcome was the 6-minute walk test (6MWT). The secondary outcomes were the stair climbing test (ST); figure-of-eight test; Index of Muscle Function (IMF); active hip range of motion (ROM) in flexion, extension, and abduction; Harris Hip Score (HHS); self-efficacy; and Hip Dysfunction and Osteoarthritis Outcome Score. The training group had larger improvements than the control group at posttest 1 on the 6MWT with an adjusted mean difference of 52 meters (95% CI 29, 74 meters; P < 0.001) and on the ST of -1 second (95% CI -2, 0 seconds; P = 0.01).There were also improvements on the figure-of-eight test (P = 0.02), IMF (P = 0.001), active hip ROM in extension (P = 0.02), HHS (P = 0.05), and self-efficacy (P = 0.04). The difference between the groups persisted at posttest 2 on the 6MWT of 52 meters (95% CI 24, 80 meters; P < 0.001) and on the ST of -1 second (95% CI -3, 0 seconds; P = 0.05). The walking skill training program was effective, especially in improving walking both immediately after the intervention and 1 year after THA surgery. Copyright © 2012 by the American College of Rheumatology.

Redundant motor drive system

NASA Technical Reports Server (NTRS)

Calvert, J. A. (Inventor)

1980-01-01

A drive system characterized by a base supporting a pair of pillars arranged in spaced parallelism, a shaft extended between and supported by the pillars for rotation about the longitudinal axis thereof, a worm gear affixed to the shaft and supported in coaxial relation therewith is described. A bearing housing of a sleeve like configuration is concentrically related to the shaft and is supported thereby for free rotation. A first and a second quiescent drive train, alternatively activatable, is provided for imparting rotation into said bearing housing. Each of the drive trains is characterized by a selectively energizable motor connected to a spur gear.

Elastomeric load sharing device

NASA Technical Reports Server (NTRS)

Isabelle, Charles J. (Inventor); Kish, Jules G. (Inventor); Stone, Robert A. (Inventor)

1992-01-01

An elastomeric load sharing device, interposed in combination between a driven gear and a central drive shaft to facilitate balanced torque distribution in split power transmission systems, includes a cylindrical elastomeric bearing and a plurality of elastomeric bearing pads. The elastomeric bearing and bearing pads comprise one or more layers, each layer including an elastomer having a metal backing strip secured thereto. The elastomeric bearing is configured to have a high radial stiffness and a low torsional stiffness and is operative to radially center the driven gear and to minimize torque transfer through the elastomeric bearing. The bearing pads are configured to have a low radial and torsional stiffness and a high axial stiffness and are operative to compressively transmit torque from the driven gear to the drive shaft. The elastomeric load sharing device has spring rates that compensate for mechanical deviations in the gear train assembly to provide balanced torque distribution between complementary load paths of split power transmission systems.

Haptic biofeedback for improving compliance with lower-extremity partial weight bearing.

PubMed

Fu, Michael C; DeLuke, Levi; Buerba, Rafael A; Fan, Richard E; Zheng, Ying Jean; Leslie, Michael P; Baumgaertner, Michael R; Grauer, Jonathan N

2014-11-01

After lower-extremity orthopedic trauma and surgery, patients are often advised to restrict weight bearing on the affected limb. Conventional training methods are not effective at enabling patients to comply with recommendations for partial weight bearing. The current study assessed a novel method of using real-time haptic (vibratory/vibrotactile) biofeedback to improve compliance with instructions for partial weight bearing. Thirty healthy, asymptomatic participants were randomized into 1 of 3 groups: verbal instruction, bathroom scale training, and haptic biofeedback. Participants were instructed to restrict lower-extremity weight bearing in a walking boot with crutches to 25 lb, with an acceptable range of 15 to 35 lb. A custom weight bearing sensor and biofeedback system was attached to all participants, but only those in the haptic biofeedback group were given a vibrotactile signal if they exceeded the acceptable range. Weight bearing in all groups was measured with a separate validated commercial system. The verbal instruction group bore an average of 60.3±30.5 lb (mean±standard deviation). The bathroom scale group averaged 43.8±17.2 lb, whereas the haptic biofeedback group averaged 22.4±9.1 lb (P<.05). As a percentage of body weight, the verbal instruction group averaged 40.2±19.3%, the bathroom scale group averaged 32.5±16.9%, and the haptic biofeedback group averaged 14.5±6.3% (P<.05). In this initial evaluation of the use of haptic biofeedback to improve compliance with lower-extremity partial weight bearing, haptic biofeedback was superior to conventional physical therapy methods. Further studies in patients with clinical orthopedic trauma are warranted. Copyright 2014, SLACK Incorporated.

Model Specification for Rework of Aircraft Engine, Power Transmission, and Accessory/Auxiliary Ball and Roller Bearings

NASA Technical Reports Server (NTRS)

Zaretsky, Erwin V.; Branzai, Emanuel V.

2007-01-01

This document provides a model specification for the rework and/or repair of bearings used in aircraft engines, helicopter main power train transmissions, and auxiliary bearings determined to be critical by virtue of performance, function, or availability. The rolling-element bearings to be processed under the provisions of this model specification may be used bearings removed after service, unused bearings returned from the field, or certain rejected bearings returned for reinspection and salvage. In commercial and military aircraft application, it has been a practice that rolling-element bearings removed at maintenance or overhaul be reworked and returned to service. Depending on the extent of rework and based upon theoretical analysis, representative life factors (LF) for bearings subject to rework ranged from 0.87 to 0.99 the lives of new bearings. Based on bearing endurance data, 92 percent of the bearing sets that would be subject to rework would result in L(sub 10) lives equaling and/or exceeding that predicted for new bearings. The remaining 8 percent of the bearings have the potential to achieve the analytically predicted life of new bearings when one of the rings is replaced at rework. The potential savings from bearing rework varies from 53 to 82 percent of that of new bearings depending on the cost, size, and complexity of the bearing

Design and Operating Characteristics of High-Speed, Small-Bore Cylindrical-Roller Bearings

NASA Technical Reports Server (NTRS)

Pinel, Stanley, I.; Signer, Hans R.; Zaretsky, Erwin V.

2000-01-01

The computer program SHABERTH was used to analyze 35-mm-bore cylindrical roller bearings designed and manufactured for high-speed turbomachinery applications. Parametric tests of the bearings were conducted on a high-speed, high-temperature bearing tester and the results were compared with the computer predictions. Bearings with a channeled inner ring were lubricated through the inner ring, while bearings with a channeled outer ring were lubricated with oil jets. Tests were run with and without outer-ring cooling. The predicted bearing life decreased with increasing speed because of increased contact stresses caused by centrifugal load. Lower temperatures, less roller skidding, and lower power losses were obtained with channeled inner rings. Power losses calculated by the SHABERTH computer program correlated reasonably well with the test results. The Parker formula for XCAV (used in SHABERTH as a measure of oil volume in the bearing cavity) needed to be adjusted to reflect the prevailing operating conditions. The XCAV formula will need to be further refined to reflect roller bearing lubrication, ring design, cage design, and location of the cage-controlling land.

A proposed lexicon of terms and concepts for human-bear management in North America

USGS Publications Warehouse

Hopkins, John B.; Herrero, Stephen; Shideler, Richard T.; Gunther, Kerry A.; Schwartz, Charles C.; Kalinowski, Steven T.

2010-01-01

We believe that communication within and among agency personnel in the United States and Canada about the successes and failures of their human–bear (Ursidae) management programs will increase the effectiveness of these programs and of bear research. To communicate more effectively, we suggest agencies clearly define terms and concepts used in human–bear management and use them in a consistent manner. We constructed a human–bear management lexicon of terms and concepts using a modified Delphi method to provide a resource that facilitates more effective communication among human–bear management agencies. Specifically, we defined 40 terms and concepts in human–bear management and suggest definitions based on discussions with 13 other professionals from the United States and Canada. Although new terms and concepts will emerge in the future and definitions will evolve as we learn more about bear behavior and ecology, our purpose is to suggest working definitions for terms and concepts to help guide human–bear management and research activities in North America. Applications or revisions of these definitions may be useful outside of North America.

The value of citizen science for ecological monitoring of mammals.

PubMed

Parsons, Arielle Waldstein; Goforth, Christine; Costello, Robert; Kays, Roland

2018-01-01

Citizen science approaches are of great interest for their potential to efficiently and sustainably monitor wildlife populations on both public and private lands. Here we present two studies that worked with volunteers to set camera traps for ecological surveys. The photographs recorded by these citizen scientists were archived and verified using the eMammal software platform, providing a professional grade, vouchered database of biodiversity records. Motivated by managers' concern with perceived high bear activity, our first example enlisted the help of homeowners in a short-term study to compare black bear activity inside a National Historic Site with surrounding private land. We found similar levels of bear activity inside and outside the NHS, and regional comparisons suggest the bear population is typical. Participants benefited from knowing their local bear population was normal and managers refocused bear management given this new information. Our second example is a continuous survey of wildlife using the grounds of a nature education center that actively manages habitat to maintain a grassland prairie. Center staff incorporated the camera traps into educational programs, involving visitors with camera setup and picture review. Over two years and 5,968 camera-nights this survey has collected 41,393 detections of 14 wildlife species. Detection rates and occupancy were higher in open habitats compared to forest, suggesting that the maintenance of prairie habitat is beneficial to some species. Over 500 volunteers of all ages participated in this project over two years. Some of the greatest benefits have been to high school students, exemplified by a student with autism who increased his communication and comfort level with others through field work with the cameras. These examples show how, with the right tools, training and survey design protocols, citizen science can be used to answer a variety of applied management questions while connecting participants with their secretive mammal neighbors.

The value of citizen science for ecological monitoring of mammals

PubMed Central

Goforth, Christine; Costello, Robert; Kays, Roland

2018-01-01

Citizen science approaches are of great interest for their potential to efficiently and sustainably monitor wildlife populations on both public and private lands. Here we present two studies that worked with volunteers to set camera traps for ecological surveys. The photographs recorded by these citizen scientists were archived and verified using the eMammal software platform, providing a professional grade, vouchered database of biodiversity records. Motivated by managers’ concern with perceived high bear activity, our first example enlisted the help of homeowners in a short-term study to compare black bear activity inside a National Historic Site with surrounding private land. We found similar levels of bear activity inside and outside the NHS, and regional comparisons suggest the bear population is typical. Participants benefited from knowing their local bear population was normal and managers refocused bear management given this new information. Our second example is a continuous survey of wildlife using the grounds of a nature education center that actively manages habitat to maintain a grassland prairie. Center staff incorporated the camera traps into educational programs, involving visitors with camera setup and picture review. Over two years and 5,968 camera-nights this survey has collected 41,393 detections of 14 wildlife species. Detection rates and occupancy were higher in open habitats compared to forest, suggesting that the maintenance of prairie habitat is beneficial to some species. Over 500 volunteers of all ages participated in this project over two years. Some of the greatest benefits have been to high school students, exemplified by a student with autism who increased his communication and comfort level with others through field work with the cameras. These examples show how, with the right tools, training and survey design protocols, citizen science can be used to answer a variety of applied management questions while connecting participants with their secretive mammal neighbors. PMID:29610706

STS-61 air-bearing floor training in bldg 9N with Astronaut Jeff Hoffman

NASA Image and Video Library

1993-06-07

Making use of the air-bearing floor in JSC's Shuttle mockup and integration laboratory, Astronaut Jeffrey A. Hoffman practices working with the Hubble Space Telescope's Wide Field/Planetary Camera (WF/PC). Changing out the large camera is one of several jobs to be performed by STS-61.

SHABERTH - ANALYSIS OF A SHAFT BEARING SYSTEM (CRAY VERSION)

NASA Technical Reports Server (NTRS)

Coe, H. H.

1994-01-01

The SHABERTH computer program was developed to predict operating characteristics of bearings in a multibearing load support system. Lubricated and non-lubricated bearings can be modeled. SHABERTH calculates the loads, torques, temperatures, and fatigue life for ball and/or roller bearings on a single shaft. The program also allows for an analysis of the system reaction to the termination of lubricant supply to the bearings and other lubricated mechanical elements. SHABERTH has proven to be a valuable tool in the design and analysis of shaft bearing systems. The SHABERTH program is structured with four nested calculation schemes. The thermal scheme performs steady state and transient temperature calculations which predict system temperatures for a given operating state. The bearing dimensional equilibrium scheme uses the bearing temperatures, predicted by the temperature mapping subprograms, and the rolling element raceway load distribution, predicted by the bearing subprogram, to calculate bearing diametral clearance for a given operating state. The shaft-bearing system load equilibrium scheme calculates bearing inner ring positions relative to the respective outer rings such that the external loading applied to the shaft is brought into equilibrium by the rolling element loads which develop at each bearing inner ring for a given operating state. The bearing rolling element and cage load equilibrium scheme calculates the rolling element and cage equilibrium positions and rotational speeds based on the relative inner-outer ring positions, inertia effects, and friction conditions. The ball bearing subprograms in the current SHABERTH program have several model enhancements over similar programs. These enhancements include an elastohydrodynamic (EHD) film thickness model that accounts for thermal heating in the contact area and lubricant film starvation; a new model for traction combined with an asperity load sharing model; a model for the hydrodynamic rolling and shear forces in the inlet zone of lubricated contacts, which accounts for the degree of lubricant film starvation; modeling normal and friction forces between a ball and a cage pocket, which account for the transition between the hydrodynamic and elastohydrodynamic regimes of lubrication; and a model of the effect on fatigue life of the ratio of the EHD plateau film thickness to the composite surface roughness. SHABERTH is intended to be as general as possible. The models in SHABERTH allow for the complete mathematical simulation of real physical systems. Systems are limited to a maximum of five bearings supporting the shaft, a maximum of thirty rolling elements per bearing, and a maximum of one hundred temperature nodes. The SHABERTH program structure is modular and has been designed to permit refinement and replacement of various component models as the need and opportunities develop. A preprocessor is included in the IBM PC version of SHABERTH to provide a user friendly means of developing SHABERTH models and executing the resulting code. The preprocessor allows the user to create and modify data files with minimal effort and a reduced chance for errors. Data is utilized as it is entered; the preprocessor then decides what additional data is required to complete the model. Only this required information is requested. The preprocessor can accommodate data input for any SHABERTH compatible shaft bearing system model. The system may include ball bearings, roller bearings, and/or tapered roller bearings. SHABERTH is written in FORTRAN 77, and two machine versions are available from COSMIC. The CRAY version (LEW-14860) has a RAM requirement of 176K of 64 bit words. The IBM PC version (MFS-28818) is written for IBM PC series and compatible computers running MS-DOS, and includes a sample MS-DOS executable. For execution, the PC version requires at least 1Mb of RAM and an 80386 or 486 processor machine with an 80x87 math co-processor. The standard distribution medium for the IBM PC version is a set of two 5.25 inch 360K MS-DOS format diskettes. The contents of the diske

Simulation-driven machine learning: Bearing fault classification

NASA Astrophysics Data System (ADS)

Sobie, Cameron; Freitas, Carina; Nicolai, Mike

2018-01-01

Increasing the accuracy of mechanical fault detection has the potential to improve system safety and economic performance by minimizing scheduled maintenance and the probability of unexpected system failure. Advances in computational performance have enabled the application of machine learning algorithms across numerous applications including condition monitoring and failure detection. Past applications of machine learning to physical failure have relied explicitly on historical data, which limits the feasibility of this approach to in-service components with extended service histories. Furthermore, recorded failure data is often only valid for the specific circumstances and components for which it was collected. This work directly addresses these challenges for roller bearings with race faults by generating training data using information gained from high resolution simulations of roller bearing dynamics, which is used to train machine learning algorithms that are then validated against four experimental datasets. Several different machine learning methodologies are compared starting from well-established statistical feature-based methods to convolutional neural networks, and a novel application of dynamic time warping (DTW) to bearing fault classification is proposed as a robust, parameter free method for race fault detection.

Reproducibilty of partial weight bearing.

PubMed

Malviya, A; Richards, J; Jones, Richard K; Udwadia, A; Doyle, J

2005-04-01

To find out whether partial weight bearing can be reproduced and retained. In vivo experiment in normal subjects. Training for partial weight bearing (25% of body weight) using bathroom scales. Reproducibility on force platform immediately after training and after 60 min. Twelve subjects were asked to reproduce 25% of their body weight through either the dominant or non-dominant limb on force platform after three practice attempts on bathroom scales with concurrent visual feedback. No feedback was provided after the measurements on force plate. The process was repeated after 1h without any practice sessions in the interim period to find out if the weight practised could be retained. The mean 0-min reading was found to be 25.9% of body weight while the mean 60-min reading was found to be 24.4%. The p-value for the difference between the two means was found to be 0.3841. This study indicates that partial weight bearing instructions can be quantified and graded. Simple bathroom scales are sufficient to educate the patients and this can be practised at home after an initial period of supervision.

Estimation of bearing contact angle in-situ by X-ray kinematography

NASA Technical Reports Server (NTRS)

Fowler, P. H.; Manders, F.

1982-01-01

The mounted, preloaded contact angle of the structural bearings in the assembled design mechanical assembly was measured. A modification of the Turns method is presented, based upon the clarity and definition of moving parts achieved with X-ray technique and cinematic display. Contact angle is estimated by counting the number of bearings passing a given point as a function of number of turns of the shaft. Ball and pitch diameter variations are discussed. Ball train and shaft angle uncertainties are also discussed.

A computerized dynamic posturography (CDP) program to reduce fall risk in a community dwelling older adult with chronic stroke: a case report.

PubMed

Hakim, Renée M; Davies, Lauren; Jaworski, Kate; Tufano, Nina; Unterstein, Allison

2012-04-01

A systematic review by Barclay-Goddard et al (2004) reported that force platform feedback improved stance symmetry but not sway, clinical balance outcomes, or measures of independence in adults with stroke. However, the role of computerized dynamic posturography (CDP) systems was not explored. The purpose of this case report was to describe a CDP training program to improve balance and reduce fall risk in a patient with a diagnosis of chronic stroke. A 61-year-old patient 8 years poststroke participated in 1 hour of CDP training, three times a week over a period of 6 weeks. Examination was conducted before and after intervention using the Sensory Organization Test (SOT), Limits of Stability (LOS) test, and Weight Bearing/Squat Symmetry test on a CDP system, and clinical testing with the Berg Balance Scale (BBS), Timed Up and Go (TUG), Activities-specific Balance Confidence (ABC) scale, 30-second Chair Stand (CS), and range of motion of the ankle joints. The patient improved in sensory integration abilities on the SOT for conditions 4, 5, and 6, and maximum excursion abilities improved by a range of 23-103% on the LOS test. Scores on the BBS increased from 37/56 to 47/56, which indicated reduced fall risk and her ABC score improved from 50% to 70%. Ankle ROM improved bilaterally by 6 to 8 degrees. This CDP training program showed promise as a systematic, objective method to reduce fall risk with improved overground performance of balance tasks in an individual with chronic stroke.

Neural Network Control of a Magnetically Suspended Rotor System

NASA Technical Reports Server (NTRS)

Choi, Benjamin; Brown, Gerald; Johnson, Dexter

1997-01-01

Abstract Magnetic bearings offer significant advantages because of their noncontact operation, which can reduce maintenance. Higher speeds, no friction, no lubrication, weight reduction, precise position control, and active damping make them far superior to conventional contact bearings. However, there are technical barriers that limit the application of this technology in industry. One of them is the need for a nonlinear controller that can overcome the system nonlinearity and uncertainty inherent in magnetic bearings. This paper discusses the use of a neural network as a nonlinear controller that circumvents system nonlinearity. A neural network controller was well trained and successfully demonstrated on a small magnetic bearing rig. This work demonstrated the feasibility of using a neural network to control nonlinear magnetic bearings and systems with unknown dynamics.

Research report: User's manual for computer program AT81y003 SHABERTH. Steady state and transient thermal analysis of a shaft bearing system including ball, cylindrical and tapered roller bearings

NASA Technical Reports Server (NTRS)

Hadden, G. B.; Kleckner, R. J.; Ragen, M. A.; Sheynin, L.

1981-01-01

The SHABERTH program is capable of simulating the thermomechanical performance of a load support system consisting of a flexible shaft supported by up to five rolling element bearings. Any combination of ball, cylindrical, and tapered roller bearings can be used to support the shaft. The user can select models in calculating lubricant film thickness and traction forces. The formulation of the cage pocket/rolling element interaction model was revised to improve solution numerical convergence characteristics.

Effects of an Off-Axis Pivoting Elliptical Training Program on Gait Function in Persons With Spastic Cerebral Palsy: A Preliminary Study.

PubMed

Tsai, Liang-Ching; Ren, Yupeng; Gaebler-Spira, Deborah J; Revivo, Gadi A; Zhang, Li-Qun

2017-07-01

This preliminary study examined the effects of off-axis elliptical training on reducing transverse-plane gait deviations and improving gait function in 8 individuals with cerebral palsy (CP) (15.5 ± 4.1 years) who completed an training program using a custom-made elliptical trainer that allows transverse-plane pivoting of the footplates during exercise. Lower-extremity off-axis control during elliptical exercise was evaluated by quantifying the root-mean-square and maximal angular displacement of the footplate pivoting angle. Lower-extremity pivoting strength was assessed. Gait function and balance were evaluated using 10-m walk test, 6-minute-walk test, and Pediatric Balance Scale. Toe-in angles during gait were quantified. Participants with CP demonstrated a significant decrease in the pivoting angle (root mean square and maximal angular displacement; effect size, 1.00-2.00) and increase in the lower-extremity pivoting strength (effect size = 0.91-1.09) after training. Reduced 10-m walk test time (11.9 ± 3.7 seconds vs. 10.8 ± 3.0 seconds; P = 0.004; effect size = 1.46), increased Pediatric Balance Scale score (43.6 ± 12.9 vs. 45.6 ± 10.8; P = 0.042; effect size = 0.79), and decreased toe-in angle (3.7 ± 10.5 degrees vs. 0.7 ± 11.7 degrees; P = 0.011; effect size = 1.22) were observed after training. We present an intervention to challenge lower-extremity off-axis control during a weight-bearing and functional activity for individuals with CP. Our preliminary findings suggest that this intervention was effective in enhancing off-axis control, gait function, and balance and reducing in-toeing gait in persons with CP.

The Healthnet project: extending online information resources to end users in rural hospitals.

PubMed

Holtum, E; Zollo, S A

1998-10-01

The importance of easily available, high quality, and current biomedical literature within the clinical enterprise is now widely documented and accepted. Access to this information has been shown to have a direct bearing on diagnosis, choices of tests, choices of drugs, and length of hospital stay. However, many health professionals do not have adequate access to current health information, particularly those practicing in rural, isolated, or underserved hospitals. Thanks to a three-year telemedicine award from the National Library of Medicine, The University of Iowa (UI) has developed a high-speed, point-to-point telecommunications network to deliver clinical and educational applications to ten community-based Iowa hospitals. One of the services offered over the network allows health professionals from the site hospitals to access online health databases and order articles via an online document delivery service. Installation, training, and troubleshooting support are provided to the remote sites by UI project staff. To date, 1,339 health professionals from the ten networked hospitals have registered to use the Healthnet program. Despite the friendly interface on the computer workstations installed at the sites, training emerged as the key issue in maximizing health professional utilization of these programs.

The Healthnet project: extending online information resources to end users in rural hospitals.

PubMed Central

Holtum, E; Zollo, S A

1998-01-01

The importance of easily available, high quality, and current biomedical literature within the clinical enterprise is now widely documented and accepted. Access to this information has been shown to have a direct bearing on diagnosis, choices of tests, choices of drugs, and length of hospital stay. However, many health professionals do not have adequate access to current health information, particularly those practicing in rural, isolated, or underserved hospitals. Thanks to a three-year telemedicine award from the National Library of Medicine, The University of Iowa (UI) has developed a high-speed, point-to-point telecommunications network to deliver clinical and educational applications to ten community-based Iowa hospitals. One of the services offered over the network allows health professionals from the site hospitals to access online health databases and order articles via an online document delivery service. Installation, training, and troubleshooting support are provided to the remote sites by UI project staff. To date, 1,339 health professionals from the ten networked hospitals have registered to use the Healthnet program. Despite the friendly interface on the computer workstations installed at the sites, training emerged as the key issue in maximizing health professional utilization of these programs. PMID:9803302

Advanced Transmission Components Investigation Program. Bearing and Seal Development.

DTIC Science & Technology

1980-08-01

STATEMENT The purpose of the program was to evaluate a modified tapered roller bearing component incorporating a VASCO-X2 integral inner race and ribbed...cup for use on the spiral bevel input shaft of an advanced helicopter main transmission. The test results indicated that this bearing concept, with its...in future transmissions. The limited oil-off survivability testing conducted did not produce expected results; however, it shovged that this type of

Spherical roller bearing analysis. SKF computer program SPHERBEAN. Volume 2: User's manual

NASA Technical Reports Server (NTRS)

Kleckner, R. J.; Dyba, G. J.

1980-01-01

The user's guide for the SPHERBEAN computer program for prediction of the thermomechanical performance characteristics of high speed lubricated double row spherical roller bearings is presented. The material presented is structured to guide the user in the practical and correct implementation of SPHERBEAN. Input and output, guidelines for program use, and sample executions are detailed.

Panda-Monium at the Library: 1995 Arizona Reading Program.

ERIC Educational Resources Information Center

Arizona State Dept. of Library, Archives and Public Records, Phoenix.

Panda bears are the theme of this guide which includes many reading-related activities, crafts, and programs on a broad range of topics, and which can be expanded to other theme approaches such as endangered species, bears in general, and the concept of black and white. The program begins with a general definition and discussion of goals,…

Stable isotopes to detect food-conditioned bears and to evaluate human-bear management

USGS Publications Warehouse

Hopkins, John B.; Koch, Paul L.; Schwartz, Charles C.; Ferguson, Jake M.; Greenleaf, Schuyler S.; Kalinowski, Steven T.

2012-01-01

We used genetic and stable isotope analysis of hair from free-ranging black bears (Ursus americanus) in Yosemite National Park, California, USA to: 1) identify bears that consume human food, 2) estimate the diets of these bears, and 3) evaluate the Yosemite human–bear management program. Specifically, we analyzed the isotopic composition of hair from bears known a priori to be food-conditioned or non-food-conditioned and used these data to predict whether bears with an unknown management status were food-conditioned (FC) or non-food-conditioned (NFC). We used a stable isotope mixing model to estimate the proportional contribution of natural foods (plants and animals) versus human food in the diets of FC bears. We then used results from both analyses to evaluate proactive (population-level) and reactive (individual-level) human–bear management, and discussed new metrics to evaluate the overall human–bear management program in Yosemite. Our results indicated that 19 out of 145 (13%) unknown bears sampled from 2005 to 2007 were food-conditioned. The proportion of human food in the diets of known FC bears likely declined from 2001–2003 to 2005–2007, suggesting proactive management was successful in reducing the amount of human food available to bears. In contrast, reactive management was not successful in changing the management status of known FC bears to NFC bears, or in reducing the contribution of human food to the diets of FC bears. Nine known FC bears were recaptured on 14 occasions from 2001 to 2007; all bears were classified as FC during subsequent recaptures, and human–bear management did not reduce the amount of human food in the diets of FC bears. Based on our results, we suggest Yosemite continue implementing proactive human–bear management, reevaluate reactive management, and consider removing problem bears (those involved in repeated bear incidents) from the population.

Bearings and Seals. FOS: Fundamentals of Service.

ERIC Educational Resources Information Center

John Deere Co., Moline, IL.

This manual on bearings and seals is one of a series of power mechanics texts and visual aids for use in training for the servicing of automotive and off-the-road farm and industrial machines. Materials provide basic information and illustrations for use by vocational students and teachers as well as shop servicemen and laymen. Focusing on…

Testing and Comparative Evaluation of Space Shuttle Main Engine Flowmeter Bearings

NASA Technical Reports Server (NTRS)

Hissam, Andy; Leberman, Mike; McLeroy, Rick

2005-01-01

This paper provides a summary of testing of Space Shuttle Main Engine (SSME) flowmeter bearings and cage material. These tests were con&cM over a several month period in 2004 at the Marshall Space Flight Center. The test program's primary objective was to compare the performance of bearings using the existing cage material and bearings using a proposed replacement cage material. In order to meet the test objectives for this program, a flowmeter test rig was designed and fabricated to measure both breakaway and running torque for a flowmeter assembly. Other test parameters,,such as motor current and shaft speed, were also recorded and provide a means of comparing bearing performance. The flowmeter and bearings were tested in liquid hydrogen to simulate the flowmeter's operating environment as closely as possible. Based on the results from this testing, the bearings with the existing cage material are equivalent to the bearings with the proposed replacement cage material. No major differences exist between the old and new cage materials. Therefore, the new cage material is a suitable replacement for the existing cage material.

SSME Bearing and Seal Tester Data Compilation, Analysis and Reporting; and Refinement of the Cryogenic Bearing Analysis Mathematical Model

NASA Technical Reports Server (NTRS)

Moore, James; Marty, Dave; Cody, Joe

2000-01-01

SRS and NASA/MSFC have developed software with unique capabilities to couple bearing kinematic modeling with high fidelity thermal modeling. The core thermomechanical modeling software was developed by SRS and others in the late 1980's and early 1990's under various different contractual efforts. SRS originally developed software that enabled SHABERTH (Shaft Bearing Thermal Model) and SINDA (Systems Improved Numerical Differencing Analyzer) to exchange data and autonomously allowing bearing component temperature effects to propagate into the steady state bearing mechanical model. A separate contract was issued in 1990 to create a personal computer version of the software. At that time SRS performed major improvements to the code. Both SHABERTH and SINDA were independently ported to the PC and compiled. SRS them integrated the two programs into a single program that was named SINSHA. This was a major code improvement.

SSME Bearing and Seal Tester Data Compilation, Analysis, and Reporting; and Refinement of the Cryogenic Bearing Analysis Mathematical Model

NASA Technical Reports Server (NTRS)

Moore, James; Marty, Dave; Cody, Joe

2000-01-01

SRS and NASA/MSFC have developed software with unique capabilities to couple bearing kinematic modeling with high fidelity thermal modeling. The core thermomechanical modeling software was developed by SRS and others in the late 1980's and early 1990's under various different contractual efforts. SRS originally developed software that enabled SHABERTH (Shaft Bearing Thermal Model) and SINDA (Systems Improved Numerical Differencing Analyzer) to exchange data and autonomously allowing bearing component temperature effects to propagate into the steady state bearing mechanical model. A separate contract was issued in 1990 to create a personal computer version of the software. At that time SRS performed major improvements to the code. Both SHABERTH and SINDA were independently ported to the PC and compiled. SRS them integrated the two programs into a single program that was named SINSHA. This was a major code improvement.

Nonlinear adaptive inverse control via the unified model neural network

NASA Astrophysics Data System (ADS)

Jeng, Jin-Tsong; Lee, Tsu-Tian

1999-03-01

In this paper, we propose a new nonlinear adaptive inverse control via a unified model neural network. In order to overcome nonsystematic design and long training time in nonlinear adaptive inverse control, we propose the approximate transformable technique to obtain a Chebyshev Polynomials Based Unified Model (CPBUM) neural network for the feedforward/recurrent neural networks. It turns out that the proposed method can use less training time to get an inverse model. Finally, we apply this proposed method to control magnetic bearing system. The experimental results show that the proposed nonlinear adaptive inverse control architecture provides a greater flexibility and better performance in controlling magnetic bearing systems.

Effects of Six Weeks Endurance Training and Aloe Vera Supplementation on COX-2 and VEGF Levels in Mice with Breast Cancer

PubMed

Shirali, Saeed; Barari, Alireza; Hosseini, Seyed Ahmad; Khodadi, Elaheh

2017-01-01

The aim of this study was to determine effects of six weeks endurance training and Aloe Vera supplementation on COX-2 and VEGF levels in mice with breast cancer. For this purpose, 35 rats were randomly divided into 5 groups: control (healthy) and 4 cancer groups: control (cancer only), training, Aloe Vera and Aloe Vera + training. Breast cancer tumors were generated in mice by implantind. The training program comprised six weeks of swimming training accomplished in three sessions per week. Training time started with 10 minutes on the first day and increased to 60 minutes in the second week and the water flow rate was increased from 7 to 15 liters per minute at a constant rate. Aloe Vera extract at a dose of 300 mg/kg BW was administrated to rats by intraperitoneal injection. At the end of the study period, rats were anesthetized and blood samples were taken. Significant differences were concluded at p<0.05 with Kolmogorov-Smirnov and Tukey tests to analyze the data. The results showed significant increase in levels of serum. COX-2 and VEGF levels in the cancer group compared with the healthy group. Administration of Aloe Vera extract caused significant decrease in the COX-2 level in the cancer group. Also, in the training (swimming exercise) and Aloe Vera + training cancer groups, we observed significant decrease in the VEGF level as compared to controls. Our results suggest that Aloe Vera and training inhibit the COX pathway and cause decrease production of prostaglandin E2. Hence administration of Aloe Vera in combination with endurance training might synergistically improve the host milieu in mice bearing breast cancers. Creative Commons Attribution License

Computing Operating Characteristics Of Bearing/Shaft Systems

NASA Technical Reports Server (NTRS)

Moore, James D.

1996-01-01

SHABERTH computer program predicts operating characteristics of bearings in multibearing load-support system. Lubricated and nonlubricated bearings modeled. Calculates loads, torques, temperatures, and fatigue lives of ball and/or roller bearings on single shaft. Provides for analysis of reaction of system to termination of supply of lubricant to bearings and other lubricated mechanical elements. Valuable in design and analysis of shaft/bearing systems. Two versions of SHABERTH available. Cray version (LEW-14860), "Computing Thermal Performances Of Shafts and Bearings". IBM PC version (MFS-28818), written for IBM PC-series and compatible computers running MS-DOS.

Microeconomic analysis of military aircraft bearing restoration

NASA Technical Reports Server (NTRS)

Hein, G. F.

1976-01-01

The risk and cost of a bearing restoration by grinding program was analyzed. A microeconomic impact analysis was performed. The annual cost savings to U.S. Army aviation is approximately $950,000.00 for three engines and three transmissions. The capital value over an indefinite life is approximately ten million dollars. The annual cost savings for U.S. Air Force engines is approximately $313,000.00 with a capital value of approximately 3.1 million dollars. The program will result in the government obtaining bearings at lower costs at equivalent reliability. The bearing industry can recover lost profits during a period of reduced demand and higher costs.

International surgical residency electives: a collaborative effort from trainees to surgeons working in low- and middle-income countries.

PubMed

Grigorian, Areg; Sicklick, Jason K; Kingham, T Peter

2014-01-01

In today's ever-globalizing climate, the academic sector bears a certain responsibility to incorporate global health opportunities into residency training programs. The worldwide unmet surgical need has been growing; it has been estimated by the World Health Organization that by 2030, surgical diseases will contribute significantly to the burden of global health. International electives (IE) offered during training may partially address this growing need. In addition, it can help trainees develop a heightened awareness of the social determinants of health in resource-limited areas, as well as gain insight into different cultures, health beliefs, and pathologic conditions. General surgery residency programs that offer IE may also stand to benefit by attracting a broader applicant pool, as well as by having the ability to train residents to rely less upon expensive tests and equipment, while further developing residents' physical examination and communications skills. The challenges that IE pose for trainees include the required adaptation to an environment devoid of an advanced and modern medical system, and a difficulty in learning a new language, culture, and local customs. However, IE may also be hazardous for home institutions as they may drain local resources and take limited educational experiences away from local providers. Despite the active promotion of international volunteerism by the American Board of Surgery, few surgery residency programs offer IE as part of the curriculum, with cost and supervision being the major obstacles to overcome. Consequently, it may be difficult to generate American surgical leaders in international health. In this article, we outline the steps needed to bring IE to an institution and how general surgery residency programs can help bridge the gap between surgeons in high-income countries and the growing surgical needs of the international community. Copyright © 2014 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Residential therapeutic communities for female substance abusers.

PubMed Central

De Leon, G.; Jainchill, N.

1991-01-01

Therapeutic communities provide a unique model for the needs of chemically dependent mothers who are pregnant or of child bearing age. These programs have been treating female addicts, many of whom reflect the profile and needs of the current generation of addicted mothers in clinical problems, social disadvantages, and poor socialization. Specific issues of their recovery can be most efficiently addressed in a residential community that provides housing and a comprehensive approach including medical, social, psychological care, parental training, and child care. Most evident is that these women need a lifestyle change, an opportunity for maturation. In this regard, the therapeutic community offers the essential element of community as a setting for learning right living. PMID:1868279

West Europe report: Science and technology. FRG: Concept paper on microelectronics, communications technology

NASA Astrophysics Data System (ADS)

1984-07-01

Precisely because the Federal Republic of Germany is a nation with a strong export orientation the capability to develop and apply, with an eye to the market, modern information and communication technologies and microelectronics which provides the basis for them has a very important bearing on the nations competitive position. To attain a leadership position in information technology, the men and women of the FRG must take up the challenge of this technology in terms of training and continuing education as well as in the media and in public life. Industry must agressively seek out markets and engage in international competition and the state must remove existing obstacles and create the kind of conditions that will make its assistance programs most effective. Programs which reflect the government's resolve to meet the challenge of information technology and to help improve the FRG's competitive position in this field are outlined.

Bearing Survivability and Friction Determination for Fuze Decoupling Applications

DTIC Science & Technology

2012-09-01

three types of ball bearings. The revolutions per minute versus time plots acquired from spin-down trials provide a qualitative view of bearing...ACKNOWLEDGMENTS The Dragon Bearing Team would like to thank Jason DeVenezia and Michael Hollis for their assistance in developing test fixtures...Optimized Navigation ( DRAGON ) program, the bearings would be used to decouple the fuze from the remainder of the body to mitigate drive actuation

Young People Not in Employment, Education or Training (NEET): An Overview in ETF Partner Countries

ERIC Educational Resources Information Center

Bardak, Ummuhan; Maseda, Martiño Rubal; Rosso, Francesca

2015-01-01

This report provides the first analysis of young people who are not in employment, education or training (NEET) in the partner countries of the European Training Foundation (ETF), on the basis of available data, and includes a discussion on the advantages and disadvantages of using this analysis for policy interventions. Bearing in mind the…

Opticalman 3 & 2, Naval Education and Training Command Rate Training Manual and Nonresident Career Course. Revised, 1979.

ERIC Educational Resources Information Center

Naval Education and Training Program Development Center, Pensacola, FL.

This document contains a U.S. Navy Rate Training Manual and Nonresident Career Course which form a self-study package to teach the theoretical knowledge and mental skills needed by the Opticalman Third Class and Opticalman Second Class. (Opticalmen maintain, repair, and overhaul telescopic alidades, azimuth and bearing circles, binoculars,…

Fall and balance outcomes after an intervention to promote leg strength, balance, and walking in people with diabetic peripheral neuropathy: "feet first" randomized controlled trial.

PubMed

Kruse, Robin L; Lemaster, Joseph W; Madsen, Richard W

2010-11-01

Weight-bearing exercise has been discouraged for people with diabetes mellitus and peripheral neuropathy (DM+PN). However, people with diabetes mellitus and insensate feet have an increased risk of falling. Lower-extremity exercise and balance training reduce fall risk in some older adults. It is unknown whether those with neuropathy experience similar benefits. As part of a study of the effects of weight-bearing exercise on foot ulceration in people with DM+PN, the effects of a lower-extremity exercise and walking intervention on balance, lower-extremity strength (force-generating capacity), and fall incidence were determined. Design The study was an observer-masked, 12-month randomized controlled trial. Part 1 of the intervention took place in physical therapy offices, and part 2 took place in the community. The participants were 79 people who were mostly sedentary, who had DM+PN, and who were randomly assigned to either a control group (n=38) or an intervention group (n=41). Intervention Part 1 included leg strengthening and balance exercises and a graduated, self-monitored walking program; part 2 included motivational telephone calls. Both groups received regular foot care, foot care education, and 8 sessions with a physical therapist. The measurements collected were strength, balance, and participant-reported falls for the year after enrollment. There were no statistically significant differences between the groups for falls during follow-up. At 12 months, there was a small increase in the amount of time that participants in the intervention group could stand on 1 leg with their eyes closed. No other strength or balance measurements differed between the groups. The study was designed to detect differences in physical activity, not falls. The intensity of the intervention was insufficient to improve strength and balance in this population. The training program had a minimal effect on participants' balance and lower-extremity strength. Increasing weight-bearing activity did not alter the rate of falling for participants in the intervention group relative to that for participants in the control group. People who are sedentary and who have DM+PN appear to be able to increase activity without increasing their rate of falling.

Multicultural Issues in Graduate Advising Relationships

ERIC Educational Resources Information Center

Schlosser, Lewis Z.; Talleyrand, Regine M.; Lyons, Heather Z.; Kim, Bryan S. K.; Johnson, W. Brad

2011-01-01

Although advisor-advisee relationships are ubiquitous to graduate training, there is relatively little scholarship bearing on advising relationships. Not surprisingly, the intersection between multiculturalism and advising relationships is also sparse. Given the potential increase in the numbers of People of Color entering graduate training due to…

Wear Measurement of Ceramic Bearings in Gas Turbines

DTIC Science & Technology

1990-03-01

CLASSIFICATION OF THIS PAGE UNCLASSIFIED The primary findings of the program are: a. The method for tagging Si 3N4, SiC, and M50 bearing components to depths of...for tagging Si 3 N4 , SiC, and M50 bearing components to depths of interest in bearings (1-20 microns) was developed, and subcontractors with the...1-2 SECTION 2 BACKGROUND The ball and roller bearings used in gas turbines are generally made of steels (MS0, 52100), and loss of bearing

Analyses of Multishaft Rotor-Bearing Response

NASA Technical Reports Server (NTRS)

Nelson, H. D.; Meacham, W. L.

1985-01-01

Method works for linear and nonlinear systems. Finite-element-based computer program developed to analyze free and forced response of multishaft rotor-bearing systems. Acronym, ARDS, denotes Analysis of Rotor Dynamic Systems. Systems with nonlinear interconnection or support bearings or both analyzed by numerically integrating reduced set of coupledsystem equations. Linear systems analyzed in closed form for steady excitations and treated as equivalent to nonlinear systems for transient excitation. ARDS is FORTRAN program developed on an Amdahl 470 (similar to IBM 370).

New Investigations of the Gow Lake Impact Structure, Saskatchewan, Canada: Impact Melt Rocks, Astronaut Training, and More

NASA Astrophysics Data System (ADS)

Osinski, G. R.; Singleton, A. C.; Ozaruk, A.; Hansen, J. R.

2012-03-01

New investigations of the Gow Lake impact structure has revealed an almost complete sequence of impactites from the crater floor upward through a series of melt-free and melt-bearing rocks. This research involved an astronaut training component.

Axial-Centrifugal Compressor Program

DTIC Science & Technology

1975-10-01

chip detector, but they were not large enough to trigger the alarm circuit. These chips we-e analyzed as M50 bearing material, which was a positive...but an analysis of these particles indicated M50 bearing material and positively identified a thrust bearing problem. 50 ’ ! i VI Figure 18. Load Cel...load cell readout became erratic and the vehicle was shut down. An inspection showed that the aft bearing sump chip detector contained M50 bearing

Development of high-speed rolling-element bearings. A historical and technical perspective

NASA Technical Reports Server (NTRS)

Zaretsky, E. V.

1982-01-01

Research on large-bore ball and roller bearings for aircraft engines is described. Tapered roller bearings and small-bore bearings are discussed. Temperature capabilities of rolling element bearings for aircraft engines have moved from 450 to 589 K (350 to 600 F) with increased reliability. High bearing speeds to 3 million DN can be achieved with a reliability exceeding that which was common in commercial aircraft. Capabilities of available bearing steels and lubricants were defined and established. Computer programs for the analysis and design of rolling element bearings were developed and experimentally verified. The reported work is a summary of NASA contributions to high performance engine and transmission bearing capabilities.

Performance of gas-lubricated nonconforming pivoted-pad journal bearings and a flexibly mounted spiral-groove thrust bearing

NASA Technical Reports Server (NTRS)

Ream, L. W.

1973-01-01

A test program was conducted to determine the performance characteristics of gas-lubricated nonconforming pivoted-pad journal bearings and a spiral-groove thrust bearing designed for the Brayton cycle rotating unit (BRU). Hydrostatic, hybrid (simultaneously hydrostatic and hydrodynamic), and hydrodynamic tests were conducted in argon gas at ambient pressure and temperature ranges representative of hydrostatic operation up to the 10.5-kWe BRU power-generating level. Performance of the gas lubricated bearings is presented, including hydrostatic gas flow rates, bearing clearances, bearing temperatures, and transient performance.

Performance of gas-lubricated cruciform-mounted tilting-pad journal bearings and a damped flexibly mounted spiral-groove thrust bearing

NASA Technical Reports Server (NTRS)

Ream, L. W.

1974-01-01

A test program was conducted to determine the performance characteristics of gas-lubricated cruciform-mounted tilting-pad journal bearings and a damped spiral-groove thrust bearing designed for the Brayton cycle rotating unit (BRU). Hydrostatic, hybrid (simultaneously hydrostatic and hydrodynamic), and hydrodynamic tests were conducted in argon gas at ambient pressure and temperature ranges representative of operation to the 10.5 kWe BRU power-generating level. Performance of the gas lubricated bearings is presented including hydrostatic gas flow rates, bearing clearances, bearing temperatures, and transient performance.

Development of a plastic surgical teaching service in a women's correctional institution.

PubMed

Fisher, J C; Powers, W E; Tuerk, D B; Edgerton, M T

1975-03-01

A plastic surgical teaching service has been organized at a women's correctional institution to provide a previously unrecognized medical need and to serve a valuable educational function for our residents in training. A total of 177 surgical candidates demonstrating a wide range of reconstructive problems including tattoos, scars, keloids, neoplasms of the skin and hands, deformities of the face and breasts, and numerous disabilities of the hands were identified among 241 inmates requesting examination. Thus far, 116 operative procedures have been performed on 101 patients. Patient acceptance has been high, and the support of prison authorities has been enthusiastic. Persistent efforts to convince legislators of the wisdom of supporting this program financially have only been partially successful and will require further accumulation of sociologic data bearing on the rehabilitative potential of the detained patient with a correctable deformity. Meanwhile, residents in training gain maturity as they provide a very "private" type of service for what has traditionally been considered a very "public" population of patients.

The young skater.

PubMed

Smith, A D

2000-10-01

Figure skating is one of the best lifetime sports. Participants may skate alone or with a group, recreationally or competitively, at all ages and at all skill levels. As a sport that improves physical fitness, skating builds strength, flexibility, and cardiopulmonary endurance. As a weight-bearing or high-impact activity, it is one of the best sports for increasing bone mineral density and perhaps for preventing osteoporosis. At least half of all competitive figure skating injuries appear preventable. Boots should be as flexible as the skater can control and should be carefully fitted. Normal flexibility of lower extremity muscles, especially in the growing athlete, markedly decreases the incidence of overuse symptoms of the knee. Core body strength is critical for controlling high-impact jump landings and decreasing injuries to the spine, pelvis, and hip girdle. Adequate shoulder strength is required for pair skaters and ice dancers. A well-designed off-ice training program decreases injury incidence and enhances performance. Assisting these dedicated athletes is truly rewarding as they train and compete at their highest potential, with passion for their sport.

Thermodynamic analysis of journal bearings operating under steady state loading in laminar regime. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Khonsari, M. M.

1983-01-01

Thermohydrodynamic effects in journal bearings operating under steady load in laminar regime are investigated. An analytical model for the finite and infinitely long journal bearings is formulated. The model includes correction factors for the cavitation effects in the unloaded region of the bearing and the mixing of the recirculating oil and supply oil at the oil inlet. A finite difference computer program is developed to numerically solve the governing equations of the continuity, Reynolds, energy, Laplace heat conduction, and a viscosity-temperature relation simultaneously. The program includes a numerical technique for obtaining an isothermal shaft temperature. The numerical results of temperature distribution and the heat effects on the bearing load carrying capacity agree closely with those of experimental findings. Several different sets of simpler boundary conditions for the energy equation are studied.

49 CFR 40.385 - Who bears the burden of proof in a PIE proceeding?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Who bears the burden of proof in a PIE proceeding... TRANSPORTATION WORKPLACE DRUG AND ALCOHOL TESTING PROGRAMS Public Interest Exclusions § 40.385 Who bears the burden of proof in a PIE proceeding? (a) As the proponent of issuing a PIE, the initiating official bears...

Prostate Cancer Ambassadors

PubMed Central

Vines, Anissa I.; Hunter, Jaimie C.; Carlisle, Veronica A.; Richmond, Alan N.

2016-01-01

African American men bear a higher burden of prostate cancer than Caucasian men, but knowledge about how to make an informed decision about prostate cancer screening is limited. A lay health advisor model was used to train “Prostate Cancer Ambassadors” on prostate cancer risk and symptoms, how to make an informed decision for prostate-specific antigen screening, and how to deliver the information to members of their community. Training consisted of two, 6-hour interactive sessions and was implemented in three predominantly African American communities over an 8-month period between 2013 and 2014. Following training, Ambassadors committed to contacting at least 10 people within 3 months using a toolkit composed of wallet-sized informational cards for distribution, a slide presentation, and a flip chart. Thirty-two Ambassadors were trained, with more than half being females (59%) and half reporting a family history of prostate cancer. Prostate cancer knowledge improved significantly among Ambassadors (p ≤ .0001). Self-efficacy improved significantly for performing outreach tasks (p < .0001), and among women in helping a loved one with making an informed decision (p = .005). There was also an improvement in collective efficacy in team members (p = .0003). Twenty-nine of the Ambassadors fulfilled their commitment to reach at least 10 people (average number of contacts per Ambassador was 11). In total, 355 individuals were reached with the prostate cancer information. The Ambassador training program proved successful in training Ambassadors to reach communities about prostate cancer and how to make an informed decision about screening. PMID:27099348

Repetitive sit-to-stand training with the step-foot position on the non-paretic side, and its effects on the balance and foot pressure of chronic stroke subjects

PubMed Central

Kim, Kyung; Kim, Young Mi; Kang, Dong Yeon

2015-01-01

[Purpose] This study aimed to improve the asymmetrical weight-bearing ratio by applying repetitive sit-to-stand training methods that feature a step-foot position to the paretic-side foot of hemiplegic patients; it sought also to provide the information needed to apply weight-bearing and balance training to hemiplegic patients. [Subjects and Methods] The subjects were divided into two groups: a spontaneous group and a step group. They all performed repetitive sit-to-stand training five times per week for a total of six weeks. The Biodex Balance System, TUG, and 5XSST were used to measure the static and dynamic standing balance of each patient. A foot mat system was used to measure foot pressure. [Results] In the balance measurements, differences in the Overall index, Ant-post index, Med-lat index, Fall risk index, TUG, and 5XSST after training was significantly different between the two study groups. In evaluating foot pressure measurements, we found that the COP (Ant-post), Peak pressure: hind foot, and Contact area: hind foot measurements significantly differed between the groups after the training. [Conclusion] Repetitive sit-to-stand training that involves positioning the non-paretic leg upward can be considered a significant form of training that improves the symmetric posture adjustment and balance of hemiplegic patients following a stroke. PMID:26357448

Development and Testing of a Radial Halbach Magnetic Bearing

NASA Technical Reports Server (NTRS)

Eichenberg, Dennis J.; Gallo, Christopher A.; Thompson, William K.

2006-01-01

The NASA John H. Glenn Research Center has developed and tested a revolutionary Radial Halbach Magnetic Bearing. The objective of this work is to develop a viable non-contact magnetic bearing utilizing Halbach arrays for all-electric flight, and many other applications. This concept will help reduce harmful emissions, reduce the Nation s dependence on fossil fuels and mitigate many of the concerns and limitations encountered in conventional axial bearings such as bearing wear, leaks, seals and friction loss. The Radial Halbach Magnetic Bearing is inherently stable and requires no active feedback control system or superconductivity as required in many magnetic bearing designs. The Radial Halbach Magnetic Bearing is useful for very high speed applications including turbines, instrumentation, medical applications, manufacturing equipment, and space power systems such as flywheels. Magnetic fields suspend and support a rotor assembly within a stator. Advanced technologies developed for particle accelerators, and currently under development for maglev trains and rocket launchers, served as the basis for this application. Experimental hardware was successfully designed and developed to validate the basic principles and analyses. The report concludes that the implementation of Radial Halbach Magnetic Bearings can provide significant improvements in rotational system performance and reliability.

Development and Testing of an Axial Halbach Magnetic Bearing

NASA Technical Reports Server (NTRS)

Eichenberg, Dennis J.; Gallo, Christopher A.; Thompson, William K.

2006-01-01

The NASA Glenn Research Center has developed and tested a revolutionary Axial Halbach Magnetic Bearing. The objective of this work is to develop a viable non-contact magnetic thrust bearing utilizing Halbach arrays for all-electric flight, and many other applications. This concept will help to reduce harmful emissions, reduce the Nation s dependence on fossil fuels and mitigate many of the concerns and limitations encountered in conventional axial bearings such as bearing wear, leaks, seals and friction loss. The Axial Halbach Magnetic Bearing is inherently stable and requires no active feedback control system or superconductivity as required in many magnetic bearing designs. The Axial Halbach Magnetic Bearing is useful for very high speed applications including turbines, instrumentation, medical systems, computer memory systems, and space power systems such as flywheels. Magnetic fields suspend and support a rotor assembly within a stator. Advanced technologies developed for particle accelerators, and currently under development for maglev trains and rocket launchers, served as the basis for this application. Experimental hardware was successfully designed and developed to validate the basic principles and analyses. The report concludes that the implementation of Axial Halbach Magnetic Bearings can provide significant improvements in rotational system performance and reliability.

Exercise Training and Bone Mineral Density.

ERIC Educational Resources Information Center

Lohman, Timothy G.

1995-01-01

The effect of exercise on total and regional bone mineral density (BMD) in postmenopausal women is reviewed. Studies on non-estrogen-replete postmenopausal women show 1-2% changes in regional BMD with 1 year of weight-bearing exercises. Studies of exercise training in the estrogen-replete postmenopausal population suggest large BMD changes.…

Investigating Main and High-Speed Shaft Bearing Reliability through Uptower Testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keller, Jonathan A

The most prevalent failure modes in wind turbine drivetrains are main bearing failures stemming from micropitting, white etching or axial cracks in gearbox bearings, and generator bearing failures. These failures are neither well understood nor accounted for in design standards; consequently, the mitigation strategies being developed and fielded may only partially address the physics of failure and can take years to assess. The U.S. Department of Energy continues to support research programs to investigate the influence of rolling element sliding on the formation of bearing axial cracks and main bearing micropitting.

Active fans and grizzly bears: Reducing risks for wilderness campers

NASA Astrophysics Data System (ADS)

Sakals, M. E.; Wilford, D. J.; Wellwood, D. W.; MacDougall, S. A.

2010-03-01

Active geomorphic fans experience debris flows, debris floods and/or floods (hydrogeomorphic processes) that can be hazards to humans. Grizzly bears ( Ursus arctos) can also be a hazard to humans. This paper presents the results of a cross-disciplinary study that analyzed both hydrogeomorphic and grizzly bear hazards to wilderness campers on geomorphic fans along a popular hiking trail in Kluane National Park and Reserve in southwestern Yukon Territory, Canada. Based on the results, a method is proposed to reduce the risks to campers associated with camping on fans. The method includes both landscape and site scales and is based on easily understood and readily available information regarding weather, vegetation, stream bank conditions, and bear ecology and behaviour. Educating wilderness campers and providing a method of decision-making to reduce risk supports Parks Canada's public safety program; a program based on the principle of user self-sufficiency. Reducing grizzly bear-human conflicts complements the efforts of Parks Canada to ensure a healthy grizzly bear population.

Design and Operating Characteristics of High-Speed, Small-Bore, Angular-Contact Ball Bearings

NASA Technical Reports Server (NTRS)

Pinel, Stanley I.; Signer, Hans R.; Zaretsky, Erwin V.

1998-01-01

The computer program SHABERTH was used to analyze 35-mm-bore, angular-contact ball bearings designed and manufactured for high-speed turbomachinery applications. Parametric tests of the bearings were conducted on a high-speed, high-temperature bearing tester and were compared with the computer predictions. Four bearing and cage designs were studied. The bearings were lubricated either by jet lubrication or through the split inner ring with and without outer-ring cooling. The predicted bearing life decreased with increasing speed because of increased operating contact stresses caused by changes in contact angle and centrifugal load. For thrust loads only, the difference in calculated life for the 24 deg. and 30 deg. contact-angle bearings was insignificant. However, for combined loading, the 24 deg. contact-angle bearing gave longer life. For split-inner-ring bearings, optimal operating conditions were obtained with a 24 deg. contact angle and an inner-ring, land-guided cage, using outer-ring cooling in conjunction with low lubricant flow rates. Lower temperature and power losses were obtained with a single-outer-ring, land-guided cage for the 24 deg. contact-angle bearing having a relieved inner ring and partially relieved outer ring. Inner-ring temperatures were independent of lubrication mode and cage design. In comparison with measured values, reasonably good engineering correlation was obtained using the computer program SHABERTH for predicted bearing power loss and for inner- and outer-ring temperatures. The Parker formula for XCAV (used in SHABERTH, a measure of oil volume in the bearing cavity) may need to be refined to reflect bearing lubrication mode, cage design, and location of cage-controlling land.

Redistribution of elements between wastes and organic-bearing material in the dispersion train of gold-bearing sulfide tailings: Part I. Geochemistry and mineralogy.

PubMed

Saryg-Ool, B Yu; Myagkaya, I N; Kirichenko, I S; Gustaytis, M A; Shuvaeva, O V; Zhmodik, S M; Lazareva, E V

2017-03-01

Migration and redistribution of elements during prolonged interaction of cyanide wastes with the underlying natural organic-bearing material have been studied in two ~40cm deep cores that sample primary ores and their weathering profile (wastes I and II, respectively) in the dispersion train of gold-bearing sulfide tailings in Siberia. Analytical results of SR-XRF, whole-rock XRF, AAS, CHNS, and SEM measurements of core samples show high K, Sr, Ti, and Fe enrichments and correlation of P 2 O 5 and Mn with LOI and C org . Organic material interlayered or mixed with the wastes accumulates Cu, Zn, Se, Cd, Ag, Au, and Hg. The peat that contacts wastes II bears up to 3wt.% Zn, 1000g/t Se, 100g/t Cd, and 8000g/t Hg. New phases of Zn and Hg sulfides and Hg selenides occur as abundant sheaths over bacterial cells suggesting microbial mediation in sorption of elements. Organic-bearing material in the cores contains 10-30g/t Au in 2-5cm thick intervals, both within and outside the intervals rich in sulfides and selenides. Most of gold is invisible but reaches 345g/t and forms 50nm to 1.5μm Au 0 particles in a thin 2-3cm interval of organic remnants mixed with wastes I. Vertical and lateral infiltration of AMD waters in peat and oxidative dissolution of wastes within the dispersion train of the Ursk tailings lead to redistribution of elements and their accumulation by combined physical (material's permeability, direction AMD), chemical (complexing, sorption by organic matter and Fe(III) hydroxides) and biochemical (metabolism of sulfate-reducing bacteria) processes. The accumulated elements form secondary sulfates, and Hg and Zn selenides. The results provide insights into accumulation of elements in the early history of coal and black shale deposits and have implications for remediation of polluted areas and for secondary enrichment technologies. Copyright © 2017 Elsevier B.V. All rights reserved.

Orbit transfer vehicle engine technology program. Task B-6 high speed turbopump bearings

NASA Technical Reports Server (NTRS)

1992-01-01

Bearing types were evaluated for use on the Orbit Transfer Vehicle (OTV) high pressure fuel pump. The high speed, high load, and long bearing life requirements dictated selection of hydrostatic bearings as the logical candidate for this engine. Design and fabrication of a bearing tester to evaluate these cryogenic hydrostatic bearings was then conducted. Detailed analysis, evaluation of bearing materials, and design of the hydrostatic bearings were completed resulting in fabrication of Carbon P5N and Kentanium hydrostatic bearings. Rotordynamic analyses determined the exact bearing geometry chosen. Instrumentation was evaluated and data acquisition methods were determined for monitoring shaft motion up to speeds in excess of 200,000 RPM in a cryogenic atmosphere. Fabrication of all hardware was completed, but assembly and testing was conducted outside of this contract.

Program for the improvement of downhole drilling motor bearings and seals. Phase V. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

DeLafosse, P.H.; Tibbitts, G.A.; Black, A.D.

1983-08-01

The work done during the fifth and final phase of a program to improve downhole drilling motor bearing and seals is described. The principal activities in this phase were: (a) testing seals with abrasive-laden mud on the low-pressure side; (b) test second and third generation designs of both elastomeric chevron seals and Teflon U-seals; and (c) testing a full-scale bearing/seal package. Several operating parameters which have a radical effect on seal life were identified, and some promising designs and materials were tested.

Problems in Bearings and Lubrication

DTIC Science & Technology

1982-08-01

Dayton, Group Leader Lubrication Systems*** SUMMARY The objective of this analytical and experimental program is to develop t, long life bearing for...established on the basis of experimental , analytical, manufacturing, and production * experience. The parameters of the Group C bearings which were not...supplied experimental hardware which has been successfully evaluated in teats to speeds of 3.0 MDN. A total of 10 Group A parametric bearings were

SHABERTH - ANALYSIS OF A SHAFT BEARING SYSTEM (CRAY VERSION)

NASA Technical Reports Server (NTRS)

Coe, H. H.

1994-01-01

The SHABERTH computer program was developed to predict operating characteristics of bearings in a multibearing load support system. Lubricated and non-lubricated bearings can be modeled. SHABERTH calculates the loads, torques, temperatures, and fatigue life for ball and/or roller bearings on a single shaft. The program also allows for an analysis of the system reaction to the termination of lubricant supply to the bearings and other lubricated mechanical elements. SHABERTH has proven to be a valuable tool in the design and analysis of shaft bearing systems. The SHABERTH program is structured with four nested calculation schemes. The thermal scheme performs steady state and transient temperature calculations which predict system temperatures for a given operating state. The bearing dimensional equilibrium scheme uses the bearing temperatures, predicted by the temperature mapping subprograms, and the rolling element raceway load distribution, predicted by the bearing subprogram, to calculate bearing diametral clearance for a given operating state. The shaft-bearing system load equilibrium scheme calculates bearing inner ring positions relative to the respective outer rings such that the external loading applied to the shaft is brought into equilibrium by the rolling element loads which develop at each bearing inner ring for a given operating state. The bearing rolling element and cage load equilibrium scheme calculates the rolling element and cage equilibrium positions and rotational speeds based on the relative inner-outer ring positions, inertia effects, and friction conditions. The ball bearing subprograms in the current SHABERTH program have several model enhancements over similar programs. These enhancements include an elastohydrodynamic (EHD) film thickness model that accounts for thermal heating in the contact area and lubricant film starvation; a new model for traction combined with an asperity load sharing model; a model for the hydrodynamic rolling and shear forces in the inlet zone of lubricated contacts, which accounts for the degree of lubricant film starvation; modeling normal and friction forces between a ball and a cage pocket, which account for the transition between the hydrodynamic and elastohydrodynamic regimes of lubrication; and a model of the effect on fatigue life of the ratio of the EHD plateau film thickness to the composite surface roughness. SHABERTH is intended to be as general as possible. The models in SHABERTH allow for the complete mathematical simulation of real physical systems. Systems are limited to a maximum of five bearings supporting the shaft, a maximum of thirty rolling elements per bearing, and a maximum of one hundred temperature nodes. The SHABERTH program structure is modular and has been designed to permit refinement and replacement of various component models as the need and opportunities develop. A preprocessor is included in the IBM PC version of SHABERTH to provide a user friendly means of developing SHABERTH models and executing the resulting code. The preprocessor allows the user to create and modify data files with minimal effort and a reduced chance for errors. Data is utilized as it is entered; the preprocessor then decides what additional data is required to complete the model. Only this required information is requested. The preprocessor can accommodate data input for any SHABERTH compatible shaft bearing system model. The system may include ball bearings, roller bearings, and/or tapered roller bearings. SHABERTH is written in FORTRAN 77, and two machine versions are available from COSMIC. The CRAY version (LEW-14860) has a RAM requirement of 176K of 64 bit words. The IBM PC version (MFS-28818) is written for IBM PC series and compatible computers running MS-DOS, and includes a sample MS-DOS executable. For execution, the PC version requires at least 1Mb of RAM and an 80386 or 486 processor machine with an 80x87 math co-processor. The standard distribution medium for the IBM PC version is a set of two 5.25 inch 360K MS-DOS format diskettes. The contents of the diskettes are compressed using the PKWARE archiving tools. The utility to unarchive the files, PKUNZIP.EXE, is included. The standard distribution medium for the CRAY version is also a 5.25 inch 360K MS-DOS format diskette, but alternate distribution media and formats are available upon request. The original version of SHABERTH was developed in FORTRAN IV at Lewis Research Center for use on a UNIVAC 1100 series computer. The Cray version was released in 1988, and was updated in 1990 to incorporate fluid rheological data for Rocket Propellant 1 (RP-1), thereby allowing the analysis of bearings lubricated with RP-1. The PC version is a port of the 1990 CRAY version and was developed in 1992 by SRS Technologies under contract to NASA Marshall Space Flight Center.

Third-Order Spectral Techniques for the Diagnosis of Motor Bearing Condition Using Artificial Neural Networks

NASA Astrophysics Data System (ADS)

Yang, D.-M.; Stronach, A. F.; MacConnell, P.; Penman, J.

2002-03-01

This paper addresses the development of a novel condition monitoring procedure for rolling element bearings which involves a combination of signal processing, signal analysis and artificial intelligence methods. Seven approaches based on power spectrum, bispectral and bicoherence vibration analyses are investigated as signal pre-processing techniques for application in the diagnosis of a number of induction motor rolling element bearing conditions. The bearing conditions considered are a normal bearing and bearings with cage and inner and outer race faults. The vibration analysis methods investigated are based on the power spectrum, the bispectrum, the bicoherence, the bispectrum diagonal slice, the bicoherence diagonal slice, the summed bispectrum and the summed bicoherence. Selected features are extracted from the vibration signatures so obtained and these are used as inputs to an artificial neural network trained to identify the bearing conditions. Quadratic phase coupling (QPC), examined using the magnitude of bispectrum and bicoherence and biphase, is shown to be absent from the bearing system and it is therefore concluded that the structure of the bearing vibration signatures results from inter-modulation effects. In order to test the proposed procedure, experimental data from a bearing test rig are used to develop an example diagnostic system. Results show that the bearing conditions examined can be diagnosed with a high success rate, particularly when using the summed bispectrum signatures.

Interest in and perceived barriers to flexible-track residencies in general surgery: a national survey of residents and program directors.

PubMed

Abbett, Sarah K; Hevelone, Nathanael D; Breen, Elizabeth M; Lipsitz, Stuart R; Peyre, Sarah E; Ashley, Stanley W; Smink, Douglas S

2011-01-01

The American Board of Surgery now permits general surgery residents to complete their clinical training over a 6-year period. Despite this new policy, the level of interest in flexible scheduling remains undefined. We sought to determine why residents and program directors (PDs) are interested in flexible tracks and to understand implementation barriers. National survey. All United States general surgery residency programs that participate in the Association of Program Directors in Surgery listserv. PDs and categorical general surgery residents in the United States. Attitudes about flexible tracks in surgery training. A flexible track was defined as a schedule that allows residents to pursue nonclinical time during residency with resulting delay in residency completion. Of the 748 residents and 81 PDs who responded, 505 residents and 45 PDs were supportive of flexible tracks (68% vs 56%, p = 0.03). Residents and PDs both were interested in flexible tracks to pursue research (86% vs 82%, p = 0.47) and child bearing (69% vs 58%, p = 0.13), but residents were more interested in pursuing international work (74% vs 53%, p = 0.004) and child rearing (63% vs 44%, p = 0.02). Although 71% of residents believe that flexible-track residents would not be respected as the equal of other residents, only 17% of PDs indicated they would not respect flexible-track residents (p < 0.001). Most residents and PDs support flexible tracks, although they differ in their motivation and perceived barriers. This finding lends support to the new policy of the American Board of Surgery. Copyright © 2011 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Effect of Transpiration Injection on Skin Friction in an Internal Supersonic Flow

NASA Technical Reports Server (NTRS)

Castiglone, L. A.; Northam, G. B.; Baker, N. R.; Roe, L. A.

1996-01-01

An experimental program was conducted at NASA Langley Research Center that included development and evaluation of an operational facility for wall drag measurement of potential scramjet fuel injection or wall cooling configurations. The facility consisted of a supersonic tunnel, with one wall composed of a series of interchangeable aluminum plates attached to an air bearing suspension system. The system was equipped with load cells that measured drag forces of 115 psia (793 kPa). This flow field contained a train of weak, unsteady, reflecting shock waves that were produced in the Mach 2 nozzle flows, the effect of reflecting shocks (which are to be expected in scramjet combustors) in internal flows has not previously been documented.

Fatigue life analysis of a turboprop reduction gearbox

NASA Technical Reports Server (NTRS)

Lewicki, D. G.; Black, J. D.; Savage, M.; Coy, J. J.

1985-01-01

A fatigue life analysis of the Allison T56/501 turboprop reduction gearbox was developed. The life and reliability of the gearbox was based on the lives and reliabilities of the main power train bearings and gears. The bearing and gear lives were determined using the Lundberg-Palmgren theory and a mission profile. The five planet bearing set had the shortest calculated life among the various gearbox components, which agreed with field experience where the planet bearing had the greatest incidences of failure. The analytical predictions of relative lives among the various bearings were in reasonable agreement with field experience. The predicted gearbox life was in excellent agreement with field data when the material life adjustment factors alone were used. The gearbox had a lower predicted life in comparison with field data when no life adjustment factors were used or when lubrication life adjustment factors were used either alone or in combination with the material factors.

Fatigue life analysis of a turboprop reduction gearbox

NASA Technical Reports Server (NTRS)

Lewicki, D. G.; Coy, J. J.; Black, J. D.; Savage, M.

1986-01-01

A fatigue life analysis of the Allison T56/501 turboprop reduction gearbox was developed. The life and reliability of the gearbox was based on the lives and reliabilities of the main power train bearings and gears. The bearing and gear lives were determined using the Lundberg-Palmgren theory and a mission profile. The five planet bearing set had the shortest calculated life among the various gearbox components, which agreed with field experience where the planet bearing had the greatest incidences of failure. The analytical predictions of relative lives among the various bearings were in reasonable agreement with field experience. The predicted gearbox life was in excellent agreement with field data when the material life adjustment factors alone were used. The gearbox had a lower predicted life in comparison with field data when no life adjustment factors were used or when lubrication life adjustment factors were used either alone or in combination with the material factors.

Development of Motor Bearings for a New SADA (BepiColombo)

NASA Astrophysics Data System (ADS)

Kreuser, J.; Bachman, R.; Bergrath, B.; Heinrich, B.; Zemann, J.

2013-09-01

The special requirements of the new MPO Solar Array Drive Assembly (SADA) developed for the BepiColombo program demanded also new ball bearing designs. In addition to typical requirements for other bearings in space mechanisms, the BepiColombo mission is characterized by a non-operating time of six years at extreme environmental conditions. In cooperation with RUAG Space CEROBEAR has developed different types of ball bearings for this SADA including motor bearings for the drive, a customized stepper motor.The purpose of this paper is to present and summarize the results of the development of the motor bearings of the SADA.

Bearing, gearing, and lubrication technology

NASA Technical Reports Server (NTRS)

Anderson, W. J.

1978-01-01

Results of selected NASA research programs on rolling-element and fluid-film bearings, gears, and elastohydrodynamic lubrication are reported. Advances in rolling-element bearing material technology, which have resulted in a significant improvement in fatigue life, and which make possible new applications for rolling bearings, are discussed. Research on whirl-resistant, fluid-film bearings, suitable for very high-speed applications, is discussed. An improved method for predicting gear pitting life is reported. An improved formula for calculating the thickness of elastohydrodynamic films (the existence of which help to define the operating regime of concentrated contact mechanisms such as bearings, gears, and cams) is described.

Enterprise Education Needs Enterprising Educators: A Case Study on Teacher Training Provision

ERIC Educational Resources Information Center

Penaluna, Kathryn; Penaluna, Andy; Usei, Caroline; Griffiths, Dinah

2015-01-01

Purpose: The purpose of this paper is to reflect upon the process that underpinned and informed the development and delivery of a "creativity-led" credit-bearing teacher training provision and to illuminate key factors of influence for the approaches to teaching and learning. Design/methodology/approach: Based on the assumption that…

STS-135 crew during Ingress/Egress Timeline training in building 9NW space station mockups

NASA Image and Video Library

2011-04-29

JSC2011-E-043875 (29 April 2011) --- NASA astronaut Rex Walheim, STS-135 mission specialist, participates in an EVA Thermal Protection System (TPS) overview training session in the TPS/Precision Air Bearing Facility in the Space Vehicle Mock-up Facility at NASA's Johnson Space Center. Photo credit: NASA

Dynamic and thermal analysis of high speed tapered roller bearings under combined loading

NASA Technical Reports Server (NTRS)

Crecelius, W. J.; Milke, D. R.

1973-01-01

The development of a computer program capable of predicting the thermal and kinetic performance of high-speed tapered roller bearings operating with fluid lubrication under applied axial, radial and moment loading (five degrees of freedom) is detailed. Various methods of applying lubrication can be considered as well as changes in bearing internal geometry which occur as the bearing is brought to operating speeds, loads and temperatures.

An AC-electromagnetic bearing for flywheel energy storage in space

NASA Technical Reports Server (NTRS)

Nikolajsen, Jorgen L.

1993-01-01

A repulsive type AC-electromagnetic bearing was developed and tested. It was conceived on the basis of the so-called Magnetic River suspension for high-speed trains. The appearance of the bearing is similar to the traditional DC-type electromagnetic bearing but the operating principle is different. The magnets are fed with alternating current instead of direct current and the rotor is fitted with a conducting sleeve (e.g. aluminum) instead of a ferromagnetic sleeve. The repulsion is due to induction of eddy-currents in the conducting sleeve. The bearing is inherently stable and requires no feedback control. It provides support in five degrees of freedom such that a short rotor may be fully supported by a single bearing. These capabilities were demonstrated experimentally. On the down side, the load carrying capacity and the damping obtained so far were quite low compared to the DC-type bearing. Also, significant heating of the conducting sleeve was experienced. The AC-bearing is essentially a modified induction motor and there are strong indications that it can be run both as a motor and as a generator with no commutator requirements. It is therefore considered to be a good candidate for support of energy storage flywheels in space.

Evaluation of ball and roller bearings restored by grinding

NASA Technical Reports Server (NTRS)

Parker, R. J.; Zaretsky, E. V.; Chen, S. M.

1976-01-01

The restoration by grinding of those rolling element bearings which are currently being discarded at aircaft engine and transmission overhaul is considered. Three bearing types were selected from the UH-1 helicopter engine and transmission for the pilot program. Groups of each of these bearings were visually and dimensionally inspected for suitability for restoration. A total of 250 bearings were restored by grinding. Of this number, 30 bearings from each type were endurance tested to a TBO of 1600 hours. No bearing failures occurred related to the restoration by grinding process. The two bearing failures which occurred were due to defective rolling elements and were typical of those which may occur in new bearings. The restorable component yield to the three groups was in excess of 90 percent.

Intelligent condition monitoring method for bearing faults from highly compressed measurements using sparse over-complete features

NASA Astrophysics Data System (ADS)

Ahmed, H. O. A.; Wong, M. L. D.; Nandi, A. K.

2018-01-01

Condition classification of rolling element bearings in rotating machines is important to prevent the breakdown of industrial machinery. A considerable amount of literature has been published on bearing faults classification. These studies aim to determine automatically the current status of a roller element bearing. Of these studies, methods based on compressed sensing (CS) have received some attention recently due to their ability to allow one to sample below the Nyquist sampling rate. This technology has many possible uses in machine condition monitoring and has been investigated as a possible approach for fault detection and classification in the compressed domain, i.e., without reconstructing the original signal. However, previous CS based methods have been found to be too weak for highly compressed data. The present paper explores computationally, for the first time, the effects of sparse autoencoder based over-complete sparse representations on the classification performance of highly compressed measurements of bearing vibration signals. For this study, the CS method was used to produce highly compressed measurements of the original bearing dataset. Then, an effective deep neural network (DNN) with unsupervised feature learning algorithm based on sparse autoencoder is used for learning over-complete sparse representations of these compressed datasets. Finally, the fault classification is achieved using two stages, namely, pre-training classification based on stacked autoencoder and softmax regression layer form the deep net stage (the first stage), and re-training classification based on backpropagation (BP) algorithm forms the fine-tuning stage (the second stage). The experimental results show that the proposed method is able to achieve high levels of accuracy even with extremely compressed measurements compared with the existing techniques.

Spherical roller bearing analysis. SKF computer program SPHERBEAN. Volume 3: Program correlation with full scale hardware tests

NASA Technical Reports Server (NTRS)

Kleckner, R. J.; Rosenlieb, J. W.; Dyba, G.

1980-01-01

The results of a series of full scale hardware tests comparing predictions of the SPHERBEAN computer program with measured data are presented. The SPHERBEAN program predicts the thermomechanical performance characteristics of high speed lubricated double row spherical roller bearings. The degree of correlation between performance predicted by SPHERBEAN and measured data is demonstrated. Experimental and calculated performance data is compared over a range in speed up to 19,400 rpm (0.8 MDN) under pure radial, pure axial, and combined loads.

Performance of 75 millimeter-bore arched outer-race ball bearings

NASA Technical Reports Server (NTRS)

Coe, H. H.; Hamrock, B. J.

1976-01-01

An investigation was performed to determine the operating characteristics of 75-mm bore, arched outer-race bearings, and to compare the data with those for a similar, but conventional, deep groove ball bearing. Further, results of an analytical study, made using a computer program developed previously, were compared with the experimental data. Bearings were tested up to 28,000 rpm shaft speed with a load of 2200 N (500 lb). The amount of arching was 0.13, 0.25, and 0.51 mm (.005, .010, and .020 in.). All bearings operated satisfactorily. The outer-race temperatures and the torques, however, were consistently higher for the arched bearings than for the conventional bearing.

Performance of 75-millimeter bore arched outer-race ball bearings

NASA Technical Reports Server (NTRS)

Coe, H. H.; Hamrock, B. J.

1976-01-01

An investigation was performed to determine the operating characteristics of 75-mm bore, arched outer-race bearings, and to compare the data with those for a similar, but conventional, deep groove ball bearing. Further, results of an analytical study, made using a computer program developed previously, were compared with the experimental data. Bearings were tested up to 28,000 rpm shaft speed with a load of 2,200 N (500 lb). The amount of arching was 0.13, 0.25, and 0.51 mm (0.005, 0.010, and 0.020 in). All bearings operated satisfactorily. The outer-race temperatures and the torques, however, were consistently higher for the arched bearings than for the conventional bearings

77 FR 50622 - Land Disposal Restrictions: Site-Specific Treatment Variance for Hazardous Selenium-Bearing Waste...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-22

... Restrictions: Site-Specific Treatment Variance for Hazardous Selenium-Bearing Waste Treated by U.S. Ecology... program, to U.S. Ecology Nevada in Beatty, Nevada for the treatment of a hazardous selenium- bearing waste.... Ecology Nevada located in Beatty, Nevada. B. Table of Contents I. Background [[Page 50623

Superconducting Meissner Effect Bearings for Cryogenic Turbomachines

DTIC Science & Technology

1993-05-01

Maximum 200 words) This report describes the second year efforts to develop a Meissner bearing system for miniature cryogenic turboexpanders used in... Turboexpander ....................................................................... 6 4.3. Task 7-Management and Reporting...The program is aimed at the development of a Meissner bearing system for miniature cryogenic turboexpanders used in Brayton cycle cryocoolers. "TIM

Failure Accommodation Tested in Magnetic Suspension Systems for Rotating Machinery

NASA Technical Reports Server (NTRS)

Provenza, Andy J.

2000-01-01

The NASA Glenn Research Center at Lewis Field and Texas A&M University are developing techniques for accommodating certain types of failures in magnetic suspension systems used in rotating machinery. In recent years, magnetic bearings have become a viable alternative to rolling element bearings for many applications. For example, industrial machinery such as machine tool spindles and turbomolecular pumps can today be bought off the shelf with magnetically supported rotating components. Nova Gas Transmission Ltd. has large gas compressors in Canada that have been running flawlessly for years on magnetic bearings. To help mature this technology and quiet concerns over the reliability of magnetic bearings, NASA researchers have been investigating ways of making the bearing system tolerant to faults. Since the potential benefits from an oil-free, actively controlled bearing system are so attractive, research that is focused on assuring system reliability and safety is justifiable. With support from the Fast Quiet Engine program, Glenn's Structural Mechanics and Dynamics Branch is working to demonstrate fault-tolerant magnetic suspension systems targeted for aerospace engine applications. The Flywheel Energy Storage Program is also helping to fund this research.

Ball bearing heat analysis program (BABHAP)

NASA Technical Reports Server (NTRS)

1978-01-01

The Ball Bearing Heat Analysis Program (BABHAP) is an attempt to assemble a series of equations, some of which are non-linear algebraic systems, in a logical order, which when solved, provide a complex analysis of load distribution among the balls, ball velocities, heat generation resulting from friction, applied load, and ball spinning, minimum lubricant film thickness, and many additional characteristics of ball bearing systems. Although initial design requirements for BABHAP were dictated by the core limitations of the PDP 11/45 computer, (approximately 8K of real words with limited number of instructions) the program dimensions can easily be expanded for large core computers such as the UNIVAC 1108. The PDP version of BABHAP is also operational on the UNIVAC system with the exception that the PDP uses 029 punch and the UNIVAC uses 026. A conversion program was written to allow transfer between machines.

Benefit from NASA

NASA Image and Video Library

2004-04-15

Technology derived by NASA for monitoring control gyros in the Skylab program is directly applicable to the problems of fault detection of railroad wheel bearings. Marhsall Space Flight Center's scientists have developed a detection concept based on the fact that bearing defects excite resonant frequency of rolling elements of the bearing as they impact the defect. By detecting resonant frequency and subsequently analyzing the character of this signal, bearing defects may be detected and identified as to source.

Design and Stress Analysis of Low-Noise Adjusted Bearing Contact Spiral Bevel Gears

NASA Technical Reports Server (NTRS)

Fuentes, A.; Litvin, F. L.; Mullins, B. R.; Woods, R.; Handschuh, R. F.; Lewicki, David G.

2002-01-01

An integrated computerized approach for design and stress analysis of low-noise spiral bevel gear drives with adjusted bearing contact is proposed. The procedure of computations is an iterative process that requires four separate procedures and provide: (a) a parabolic function of transmission errors that is able to reduce the effect of errors of alignment on noise and vibration, and (b) reduction of the shift of bearing contact caused by misalignment. Application of finite element analysis enables us to determine the contact and bending stresses and investigate the formation of the bearing contact. The design of finite element models and boundary conditions is automated and does not require intermediate CAD computer programs for application of general purpose computer program for finite element analysis.

NASTRAN structural model for the large ground antenna pedestal with applications to hydrostatic bearing of film

NASA Technical Reports Server (NTRS)

Chian, C. T.

1986-01-01

Investigations were conducted on the 64-meter antenna hydrostatic bearing oil film thickness under a variety of loads and elastic moduli. These parametric studies used a NASTRAN pedestal structural model to determine the deflections under the hydrostatic bearing pad. The deflections formed the input for a computer program to determine the hydrostratic bearing oil film thickness. For the future 64-meter to 70-meter antenna extension and for the 2.2-meter (86-in.) haunch concrete replacement cases, the program predicted safe oil film thickness (greater than 0.13 mm (0.005 in.) at the corners of the pad). The effects of varying moduli of elasticity for different sections of the pedestal and the film height under stressed runner conditions were also studied.

76 FR 52937 - Ball Bearings and Parts Thereof From France, Germany, and Italy: Final Results of Antidumping...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-24

... programming and other errors in the margin calculations. Therefore, the final results are different from the... certain companies. We have corrected programming and other errors in the margins we included in the... Technologies GmbH; Italy--Schaeffler Italia S.r.l./WPB Water Pump Bearing GmbH & Co. KG/The Schaeffler Group...

Detailed view of one (1) end of the swing span, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detailed view of one (1) end of the swing span, supported on a rest pier, with the span in the closed position and in the train operational mode. Note the end truss bearing where a steel wedge is in the driven position to complete the end bearing arrangement. The wedges are power-driven through the machinery crank arms shown, thus forcing the ends of the swing span truss upward. Note: The top of the old stone pies has been encased with a concrete collar to hold stone masonry together and strengthen truss bearing points. - Bridgeport Swing Span Bridge, Spanning Tennessee River, Bridgeport, Jackson County, AL

How do psychiatrists in India construct their professional identity? A critical literature review.

PubMed

Bayetti, Clement; Jadhav, Sushrut; Deshpande, Smita N

2017-01-01

Psychiatric practice in India is marked by an increasing gulf between largely urban-based mental health professionals and a majority rural population. Based on the premise that any engagement is a mutually constructed humane process, an understanding of the culture of psychiatry including social process of local knowledge acquisition by trainee psychiatrists is critical. This paper reviews existing literature on training of psychiatrists in India, the cultural construction of their professional identities and autobiographical reflections. The results reveal a scarcity of research on how identities, knowledge, and values are constructed, contested, resisted, sustained, and operationalized through practice. This paper hypothesizes that psychiatric training and practice in India continues to operate chiefly in an instrumental fashion and bears a circular relationship between cultural, hierarchical training structures and patient-carer concerns. The absence of interpretative social science training generates a professional identity that predominantly focuses on the patient and his/her social world as the site of pathology. Infrequent and often superfluous critical cultural reflexivity gained through routine clinical practice further alienates professionals from patients, caregivers, and their own social landscapes. This results in a peculiar brand of theory and practice that is skewed toward a narrow understanding of what constitutes suffering. The authors argue that such omissions could be addressed through nuanced ethnographies on the professional development of psychiatrists during postgraduate training, including the political economies of their social institutions and local cultural landscapes. Further research will also help enhance culturally sensitive epistemology and shape locally responsive mental health training programs. This is critical for majority rural Indians who place their trust in State biomedical care.

Methods for a Randomized Trial of Weight-Supported Treadmill Training versus Conventional Training for Walking during Inpatient Rehabilitation after Incomplete Traumatic Spinal Cord Injury

PubMed Central

Dobkin, Bruce H.; Apple, David; Barbeau, Hugues; Basso, Michele; Behrman, Andrea; Deforge, Dan; Ditunno, John; Dudley, Gary; Elashoff, Robert; Fugate, Lisa; Harkema, Susan; Saulino, Michael; Scott, Michael

2014-01-01

The authors describe the rationale and methodology for the first prospective, multicenter, randomized clinical trial (RCT) of a task-oriented walking intervention for subjects during early rehabilitation for an acute traumatic spinal cord injury (SCI). The experimental strategy, body weight–supported treadmill training (BWSTT), allows physical therapists to systematically train patients to walk on a treadmill at increasing speeds typical of community ambulation with increasing weight bearing. The therapists provide verbal and tactile cues to facilitate the kinematic, kinetic, and temporal features of walking. Subjects were randomly assigned to a conventional therapy program for mobility versus the same intensity and duration of a combination of BWSTT and over-ground locomotor retraining. Subjects had an incomplete SCI (American Spinal Injury Association grades B, C, and D) from C-4 to T-10 (upper motoneuron group) or from T-11 to L-3 (lower motoneuron group). Within 8 weeks of a SCI, 146 subjects were entered for 12 weeks of intervention. The 2 single-blinded primary outcome measures are the level of independence for ambulation and, for those who are able to walk, the maximal speed for walking 50 feet, tested 6 and 12 months after randomization. The trial’s methodology offers a model for the feasibility of translating neuroscientific experiments into a RCT to develop evidence-based rehabilitation practices. PMID:14503436

A New 1000 F Magnetic Bearing Test Rig

NASA Technical Reports Server (NTRS)

Kascak, Albert F.; Montague, Gerald T.; Brown, Gerald V.; Palazzolo, Alan B.

1997-01-01

NASA and the Army are currently exploring the possibility of using magnetic bearings in gas turbine engines. The use of magnetic bearings in gas turbine engines could increase the reliability by eliminating the lubrication system. The use of magnetic bearings could also increase the speed and the size of the shafts in the engine, thus reducing vibrations and possibly eliminating third bearings. Magnetic bearings can apply forces to the shafts and move them so that blade tips and seals do not rub. This could be part of an active vibration cancellation system. Also, whirling (displacing the shaft center line) may delay rotating stall and increase the stall margin of the engine. Magnetic bearings coupled with an integral starter generator could result in a more efficient 'more electric' engine. The IHPTET program, a joint DOD-industry program, has identified a need for a high temperature, (as high as 1200 F), magnetic bearing that could be demonstrated in a phase m engine. A magnetic bearing is similar to an electric motor. The magnetic bearing has a laminated rotor and stator made out of cobalt steel. The stator has a series of coils of wire wound around it. These coils f u. a series of electromagnets around the circumference. These magnets exert a force on the rotor to keep the rotor in the center of the cavity. The centering force is commanded by a controller based on shaft position, (measured by displacement probes). The magnetic bearing can only pull and is basically unstable before active control is applied The engine shafts, bearings, and case form a flexible structure which contain a large number of modes. A controller is necessary to stabilize these modes. A power amplifier is also necessary to provide the current prescribed by the controller to the magnetic bearings. In case of very high loads, a conventional back up bearing will engage and stop the rotor and stator from rubbing.

STS-134 crew during EVA TPS Overview training in the TPS/PABF

NASA Image and Video Library

2009-12-15

JSC2009-E-284901 (15 Dec. 2009) --- NASA astronauts Gregory H. Johnson (left), STS-134 pilot; and Michael Fincke, mission specialist, participate in an EVA Thermal Protection System (TPS) overview training session in the TPS/ Precision Air Bearing Facility in the Space Vehicle Mock-up Facility at NASA?s Johnson Space Center.

What if Best Practice Is Too Expensive? Feedback on Oral Presentations and Efficient Use of Resources

ERIC Educational Resources Information Center

Leger, Lawrence A.; Glass, Karligash; Katsiampa, Paraskevi; Liu, Shibo; Sirichand, Kavita

2017-01-01

We evaluate feedback methods for oral presentations used in training non-quantitative research skills (literature review and various associated tasks). Training is provided through a credit-bearing module taught to MSc students of banking, economics and finance in the UK. Monitoring oral presentations and providing "best practice"…

Using tri-axial accelerometers to identify wild polar bear behaviors

USGS Publications Warehouse

Pagano, Anthony M.; Rode, Karyn D.; Cutting, A.; Owen, M.A.; Jensen, S.; Ware, J.V.; Robbins, C.T.; Durner, George M.; Atwood, Todd C.; Obbard, M.E.; Middel, K.R.; Thiemann, G.W.; Williams, T.M.

2017-01-01

Tri-axial accelerometers have been used to remotely identify the behaviors of a wide range of taxa. Assigning behaviors to accelerometer data often involves the use of captive animals or surrogate species, as their accelerometer signatures are generally assumed to be similar to those of their wild counterparts. However, this has rarely been tested. Validated accelerometer data are needed for polar bears Ursus maritimus to understand how habitat conditions may influence behavior and energy demands. We used accelerometer and water conductivity data to remotely distinguish 10 polar bear behaviors. We calibrated accelerometer and conductivity data collected from collars with behaviors observed from video-recorded captive polar bears and brown bears U. arctos, and with video from camera collars deployed on free-ranging polar bears on sea ice and on land. We used random forest models to predict behaviors and found strong ability to discriminate the most common wild polar bear behaviors using a combination of accelerometer and conductivity sensor data from captive or wild polar bears. In contrast, models using data from captive brown bears failed to reliably distinguish most active behaviors in wild polar bears. Our ability to discriminate behavior was greatest when species- and habitat-specific data from wild individuals were used to train models. Data from captive individuals may be suitable for calibrating accelerometers, but may provide reduced ability to discriminate some behaviors. The accelerometer calibrations developed here provide a method to quantify polar bear behaviors to evaluate the impacts of declines in Arctic sea ice.

Public reporting and pay-for-performance: safety-net hospital executives' concerns and policy suggestions.

PubMed

Goldman, L Elizabeth; Henderson, Stuart; Dohan, Daniel P; Talavera, Jason A; Dudley, R Adams

2007-01-01

Safety-net hospitals (SNHs) may gain little financial benefit from the rapidly spreading adoption of public reporting and pay-for-performance, but may feel compelled to participate (and bear the costs of data collection) to meet public expectations of transparency and accountability. To better understand the concerns that SNH administrators have regarding public reporting and pay-for-performance, we interviewed 37 executives at randomly selected California SNHs. The main concerns noted by SNH executives were that human and financial resource constraints made it difficult for SNHs to accurately measure their performance. Additionally, some executives felt that market-driven public reporting and pay-for-performance may focus on clinical areas and incentive structures that may not be high-priority clinical areas for SNHs. Executives at SNHs suggested several policy responses to these concerns-such as offering training programs for SNH data collectors-that could be relatively inexpensive and might improve the cost-benefit ratio of public reporting and pay-for-performance programs.

Growing Leaders in Native American Communities: An Interview with Gerald Eagle Bear

ERIC Educational Resources Information Center

Hill, Sara

2006-01-01

In the summer of 2005, I interviewed Gerald Eagle Bear about his work to promote civic and cultural engagement among Native American youth. Eagle Bear is program manager of the Oyate Networking Project, an affiliate of Christian Children's Fund, in Mission, South Dakota. The organization focuses on early childhood education, youth violence…

Training with a balance exercise assist robot is more effective than conventional training for frail older adults.

PubMed

Ozaki, Kenichi; Kondo, Izumi; Hirano, Satoshi; Kagaya, Hitoshi; Saitoh, Eiichi; Osawa, Aiko; Fujinori, Yoichi

2017-11-01

To examine the efficacy of postural strategy training using a balance exercise assist robot (BEAR) as compared with conventional balance training for frail older adults. The present study was designed as a cross-over trial without a washout term. A total of 27 community-dwelling frail or prefrail elderly residents (7 men, 20 women; age range 65-85 years) were selected from a volunteer sample. Two exercises were prepared for interventions: robotic exercise moving the center of gravity by the balance exercise assist robot system; and conventional balance training combining muscle-strengthening exercise, postural strategy training and applied motion exercise. Each exercise was carried out twice a week for 6 weeks. Participants were allocated randomly to either the robotic exercise first group or the conventional balance exercise first group. preferred and maximal gait speeds, tandem gait speeds, timed up-and-go test, functional reach test, functional base of support, center of pressure, and muscle strength of the lower extremities were assessed before and after completion of each exercise program. Robotic exercise achieved significant improvements for tandem gait speed (P = 0.012), functional reach test (P = 0.002), timed up-and-go test (P = 0.023) and muscle strength of the lower extremities (P = 0.001-0.030) compared with conventional exercise. In frail or prefrail older adults, robotic exercise was more effective for improving dynamic balance and lower extremity muscle strength than conventional exercise. These findings suggest that postural strategy training with the balance exercise assist robot is effective to improve the gait instability and muscle weakness often seen in frail older adults. Geriatr Gerontol Int 2017; 17: 1982-1990. © 2017 The Authors. Geriatrics & Gerontology International published by John Wiley & Sons Australia, Ltd on behalf of Japan Geriatrics Society.

47 CFR 74.1235 - Power limitations and antenna systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... EXPERIMENTAL RADIO, AUXILIARY, SPECIAL BROADCAST AND OTHER PROGRAM DISTRIBUTIONAL SERVICES FM Broadcast... each radial spaced 30 degrees apart and with the bearing of the first radial bearing true north. Each...

47 CFR 74.1235 - Power limitations and antenna systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... EXPERIMENTAL RADIO, AUXILIARY, SPECIAL BROADCAST AND OTHER PROGRAM DISTRIBUTIONAL SERVICES FM Broadcast... each radial spaced 30 degrees apart and with the bearing of the first radial bearing true north. Each...

47 CFR 74.1235 - Power limitations and antenna systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... EXPERIMENTAL RADIO, AUXILIARY, SPECIAL BROADCAST AND OTHER PROGRAM DISTRIBUTIONAL SERVICES FM Broadcast... each radial spaced 30 degrees apart and with the bearing of the first radial bearing true north. Each...

47 CFR 74.1235 - Power limitations and antenna systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... EXPERIMENTAL RADIO, AUXILIARY, SPECIAL BROADCAST AND OTHER PROGRAM DISTRIBUTIONAL SERVICES FM Broadcast... each radial spaced 30 degrees apart and with the bearing of the first radial bearing true north. Each...

47 CFR 74.1235 - Power limitations and antenna systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... EXPERIMENTAL RADIO, AUXILIARY, SPECIAL BROADCAST AND OTHER PROGRAM DISTRIBUTIONAL SERVICES FM Broadcast... each radial spaced 30 degrees apart and with the bearing of the first radial bearing true north. Each...

Effects of pivoting neuromuscular training on pivoting control and proprioception.

PubMed

Lee, Song Joo; Ren, Yupeng; Chang, Alison H; Geiger, François; Zhang, Li-Qun

2014-07-01

Pivoting neuromuscular control and proprioceptive acuity may play an important role in anterior cruciate ligament injuries. The goal of this study was to investigate whether pivoting off-axis intensity adjustable neuromuscular control training (POINT) could improve pivoting neuromuscular control, proprioceptive acuity, and functional performance. Among 41 subjects, 21 subjects participated in 18 sessions of POINT (three sessions per week for 6 wk), and 20 subjects served as controls who did their regular workout. Both groups received pre-, mid-, and postintervention evaluations. Propensity score analysis with multivariable regression adjustment was used to investigate the effect of training on pivoting neuromuscular control (pivoting instability, leg pivoting stiffness, maximum internal, and external pivoting angles), proprioceptive acuity, and functional performance in both groups. Compared with the control group, the training group significantly improved pivoting neuromuscular control as reduced pivoting instability, reduced maximum internal and external pivoting angles, increased leg pivoting stiffness, and decreased entropy of time to peak EMG in the gluteus maximus and lateral gastrocnemius under pivoting perturbations. Furthermore, the training group enhanced weight-bearing proprioceptive acuity and improved the single leg hop distance. Improvement of pivoting neuromuscular control in functional weight-bearing activities and task performances after POINT may help develop lower limb injury prevention and rehabilitation methods to reduce anterior cruciate ligament and other musculoskeletal injuries associated with pivoting sports.

Effects of Pivoting Neuromuscular Training on Pivoting Control and Proprioception

PubMed Central

Lee, Song Joo; Ren, Yupeng; Chang, Alison H.; Geiger, François; Zhang, Li-Qun

2014-01-01

Purpose Pivoting neuromuscular control and proprioceptive acuity may play an important role in ACL injuries. The goal of this study was to investigate whether pivoting neuromuscular training on an offaxis elliptical trainer (POINT) could improve pivoting neuromuscular control, proprioceptive acuity, and functional performance. Methods Among 41 subjects, 21 subjects participated in 18 sessions of POINT (3 sessions/week for 6 weeks), and 20 subjects served as controls who did their regular workout. Both groups received pre-, mid-, and post-intervention evaluations. Propensity score analysis with multivariable regression adjustment was used to investigate the effect of training on pivoting neuromuscular control (pivoting instability, leg pivoting stiffness, maximum internal and external pivoting angles), proprioceptive acuity, and functional performance in both groups. Results Compared to the control group, the training group significantly improved pivoting neuromuscular control as reduced pivoting instability, reduced maximum internal and external pivoting angles, increased leg pivoting stiffness, and decreased entropy of time to peak EMG in the gluteus maximus and lateral gastrocnemius under pivoting perturbations. Furthermore, the training group enhanced weight-bearing proprioceptive acuity and improved the single leg hop distance. Conclusion Improvement of pivoting neuromuscular control in functional weight-bearing activities and task performances following POINT may help develop lower limb injury prevention and rehabilitation methods to reduce ACL and other musculoskeletal injuries associated with pivoting sports. PMID:24389517

High-Temperature Magnetic Bearings for Gas Turbine Engines

NASA Technical Reports Server (NTRS)

1996-01-01

Magnetic bearings are the subject of a new NASA Lewis Research Center and U.S. Army thrust with significant industry participation, and coordination with other Government agencies. The NASA/Army emphasis is on high-temperature applications for future gas turbine engines. Magnetic bearings could increase the reliability and reduce the weight of these engines by eliminating the lubrication system. They could also increase the DN (diameter of the bearing times rpm) limit on engine speed and allow active vibration cancellation systems to be used--resulting in a more efficient, "more electric" engine. Finally, the Integrated High-Performance Turbine Engine Technology (IHPTET) Program, a joint Department of Defense/industry program, identified a need for a hightemperature (as high as 1200 F) magnetic bearing that could be demonstrated in a phase III engine. This magnetic bearing is similar to an electric motor. It has a laminated rotor and stator made of cobalt steel. Wound around the stator are a series of electrical wire coils that form a series of electric magnets around the circumference. The magnets exert a force on the rotor. A probe senses the position of the rotor, and a feedback controller keeps it in the center of the cavity. The engine rotor, bearings, and case form a flexible structure that contains a large number of modes. The bearing feedback controller, which could cause some of these modes to become unstable, could be adapted to varying flight conditions to minimize seal clearances and monitor the health of the system. Cobalt steel has a curie point greater than 1700 F, and copper wire has a melting point beyond that. Therefore, practical limitations associated with the maximum magnetic field strength in the cobalt steel and the stress in the rotating components limit the temperature to about 1200 F. The objective of this effort is to determine the limits in temperature and speed of a magnetic bearing operating in an engine. Our approach is to use our in-house experience in magnets, mechanical components, high-temperature materials, and surface lubrication to build and test a magnetic bearing in both a rig and an engine. Testing will be done at Lewis or through cooperative programs in industrial facilities.

A Novel Bearing Multi-Fault Diagnosis Approach Based on Weighted Permutation Entropy and an Improved SVM Ensemble Classifier.

PubMed

Zhou, Shenghan; Qian, Silin; Chang, Wenbing; Xiao, Yiyong; Cheng, Yang

2018-06-14

Timely and accurate state detection and fault diagnosis of rolling element bearings are very critical to ensuring the reliability of rotating machinery. This paper proposes a novel method of rolling bearing fault diagnosis based on a combination of ensemble empirical mode decomposition (EEMD), weighted permutation entropy (WPE) and an improved support vector machine (SVM) ensemble classifier. A hybrid voting (HV) strategy that combines SVM-based classifiers and cloud similarity measurement (CSM) was employed to improve the classification accuracy. First, the WPE value of the bearing vibration signal was calculated to detect the fault. Secondly, if a bearing fault occurred, the vibration signal was decomposed into a set of intrinsic mode functions (IMFs) by EEMD. The WPE values of the first several IMFs were calculated to form the fault feature vectors. Then, the SVM ensemble classifier was composed of binary SVM and the HV strategy to identify the bearing multi-fault types. Finally, the proposed model was fully evaluated by experiments and comparative studies. The results demonstrate that the proposed method can effectively detect bearing faults and maintain a high accuracy rate of fault recognition when a small number of training samples are available.

High-Temperature Solid Lubricants Developed by NASA Lewis Offer Virtually "Unlimited Life" for Oil-Free Turbomachinery

NASA Technical Reports Server (NTRS)

DellaCorte, Christopher; Valco, Mark J.

1999-01-01

The NASA Lewis Research Center is capitalizing on breakthroughs in foil air bearing performance, tribological coatings, and computer analyses to formulate the Oil-free Turbomachinery Program. The program s long-term goal is to develop an innovative, yet practical, oil-free aeropropulsion gas turbine engine that floats on advanced air bearings. This type of engine would operate at higher speeds and temperatures with lower weight and friction than conventional oil-lubricated engines. During startup and shutdown, solid lubricant coatings are required to prevent wear in such engines before the self-generating air-lubrication film develops. NASA s Tribology Branch has created PS304, a chrome-oxide-based plasma spray coating specifically tailored for shafts run against foil bearings. PS304 contains silver and barium fluoride/calcium fluoride eutectic (BaF2/CaF2) lubricant additives that, together, provide lubrication from cold start temperatures to over 650 C, the maximum use temperature for foil bearings. Recent lab tests show that bearings lubricated with PS304 survive over 100 000 start-stop cycles without experiencing any degradation in performance due to wear. The accompanying photograph shows a test bearing after it was run at 650 C. The rubbing process created a "polished" surface that enhances bearing load capacity.

Development of a morphological convolution operator for bearing fault detection

NASA Astrophysics Data System (ADS)

Li, Yifan; Liang, Xihui; Liu, Weiwei; Wang, Yan

2018-05-01

This paper presents a novel signal processing scheme, namely morphological convolution operator (MCO) lifted morphological undecimated wavelet (MUDW), for rolling element bearing fault detection. In this scheme, a MCO is first designed to fully utilize the advantage of the closing & opening gradient operator and the closing-opening & opening-closing gradient operator for feature extraction as well as the merit of excellent denoising characteristics of the convolution operator. The MCO is then introduced into MUDW for the purpose of improving the fault detection ability of the reported MUDWs. Experimental vibration signals collected from a train wheelset test rig and the bearing data center of Case Western Reserve University are employed to evaluate the effectiveness of the proposed MCO lifted MUDW on fault detection of rolling element bearings. The results show that the proposed approach has a superior performance in extracting fault features of defective rolling element bearings. In addition, comparisons are performed between two reported MUDWs and the proposed MCO lifted MUDW. The MCO lifted MUDW outperforms both of them in detection of outer race faults and inner race faults of rolling element bearings.

Exercise Habit

MedlinePlus

... and lungs. Examples of aerobic exercise include walking, hiking, running, aerobic dance, biking, rowing, swimming, and cross- ... Examples of weight-bearing exercise include walking, yoga, hiking, climbing stairs, playing tennis, dancing, and strength training. ...

Groundwater Protection Program Calendar Year 1998 Groundwater Monitoring Report, U.S. Department of Energy Y-12 Plant, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1999-03-01

This annual monitoring report contains groundwater and surface water monitoring data obtained during calendar year (CY) 1998 by the Lockheed Martin Energy Systems, Inc. Y-12 Plant Groundwater Protection Program (GWPP) at the U.S. Department of Energy (DOE) Oak Ridge Y-12 Plant, Groundwater and surface water monitoring during CY 1998 was performed in three hydrogeologic regimes at the Y-12 Plant: the Bear Creek Hydrogeologic Regime (Bear Creek Regime), the Chestnut Ridge Hydrogeologic Regime (Chestnut Ridge Regime), and the Upper East Fork Poplar Creek Hydrogeologic Regime (East Fork Regime). The Bear Creek and East Fork regimes are located in Bear Creek Valleymore » (BCV), and the Chestnut Ridge Regime which is located south of the Y-12 Plant.« less

Design and Stress Analysis of Low-Noise Adjusted Bearing Contact Spiral Bevel Gears

NASA Technical Reports Server (NTRS)

Litvin, Faydor L.; Fuentes, Alfonso; Mullins, Baxter R.; Woods, Ron

2002-01-01

An integrated computerized approach for design and stress analysis of low-noise spiral bevel gear drives with adjusted bearing contact has been developed. The computation procedure is an iterative process, requiring four separate steps that provide: (a) a parabolic function of transmission errors that is able to reduce the effect of errors of alignment, and (b) reduction of the shift of bearing contact caused by misalignment. Application of finite element analysis permits the contact and bending stresses to be determined and investigate the formation of the bearing contact. The design of finite element models and boundary conditions is automated and does not require an intermediate CAD computer program. A commercially available finite element analysis computer program with contact capability was used to conduct the stress analysis. The theory developed is illustrated with numerical examples.

Spherical roller bearing analysis. SKF computer program SPHERBEAN. Volume 1: Analysis

NASA Technical Reports Server (NTRS)

Kleckner, R. J.; Pirvics, J.

1980-01-01

The models and associated mathematics used within the SPHERBEAN computer program for prediction of the thermomechanical performance characteristics of high speed lubricated double row spherical roller bearings are presented. The analysis allows six degrees of freedom for each roller and three for each half of an optionally split cage. Roller skew, free lubricant, inertial loads, appropriate elastic and friction forces, and flexible outer ring are considered. Roller quasidynamic equilibrium is calculated for a bearing with up to 30 rollers per row, and distinct roller and flange geometries are specifiable. The user is referred to the material contained here for formulation assumptions and algorithm detail.

Unsupervised Learning —A Novel Clustering Method for Rolling Bearing Faults Identification

NASA Astrophysics Data System (ADS)

Kai, Li; Bo, Luo; Tao, Ma; Xuefeng, Yang; Guangming, Wang

2017-12-01

To promptly process the massive fault data and automatically provide accurate diagnosis results, numerous studies have been conducted on intelligent fault diagnosis of rolling bearing. Among these studies, such as artificial neural networks, support vector machines, decision trees and other supervised learning methods are used commonly. These methods can detect the failure of rolling bearing effectively, but to achieve better detection results, it often requires a lot of training samples. Based on above, a novel clustering method is proposed in this paper. This novel method is able to find the correct number of clusters automatically the effectiveness of the proposed method is validated using datasets from rolling element bearings. The diagnosis results show that the proposed method can accurately detect the fault types of small samples. Meanwhile, the diagnosis results are also relative high accuracy even for massive samples.

Gas Bearing Implementation of Small Cryocooler Compressor

NASA Astrophysics Data System (ADS)

Kuo, D. T.; Loc, A. S.; Hanes, M.

2006-04-01

In order to reduce the life-cycle cost of systems that use cryocoolers, it is necessary to extend the operating life of the cooler beyond what is currently available for tactical military applications. Several approaches have been used to increase life such as flexure bearing and gas bearing support. It was determined that a gas bearing system offered a novel and cost effective approach for our products. This paper presents the implementation of a gas bearing system into the miniature cryocooler compressor. The theoretical analyses used to design the gas bearing system will be discussed and empirical data comparing the performance between the baseline and gas bearing coolers will be presented. A life test program is being undertaken to verify the life characteristics of the gas bearing cooler and the results will be summarized and published at a later date.

Design and Analysis of an Electromagnetic Thrust Bearing

NASA Technical Reports Server (NTRS)

Banerjee, Bibhuti; Rao, Dantam K.

1996-01-01

A double-acting electromagnetic thrust bearing is normally used to counter the axial loads in many rotating machines that employ magnetic bearings. It essentially consists of an actuator and drive electronics. Existing thrust bearing design programs are based on several assumptions. These assumptions, however, are often violated in practice. For example, no distinction is made between maximum external loads and maximum bearing forces, which are assumed to be identical. Furthermore, it is assumed that the maximum flux density in the air gap occurs at the nominal gap position of the thrust runner. The purpose of this paper is to present a clear theoretical basis for the design of the electromagnetic thrust bearing which obviates such assumptions.

Development of new materials for turbopump bearings

NASA Technical Reports Server (NTRS)

Maurer, R. E.; Pallini, R. A.

1985-01-01

The life requirement for the angular contact ball bearings in the Space Shuttle Main Engine (SSME) high pressure oxygen turbopump (HPOTP) is 7.5 hours. In actual operation, significantly shorter service life was experienced. The objective is to identify bearing materials and/or materials processing techniques offering signficant potential for extending HPOTP bearing performance life. Interactive thermomechanical analysis of the HPOTP bearing-shaft system was performed with the SHABERTH computer program. Bearing fatigue life, ball-race contact stress, heat generation rate, bulk ring temperatures and circumferential stress in the inner rings were quantified as functions of radial load, thrust load and ball-race contact friction. Criteria established from the output of this analysis are being used for material candidate selection.

Carbon-Phenolic Cages for High-Speed Bearings. Part II - Bearing Evaluation with a Multiply-Alkylated Cyclopentane (MAC) Lubricant

DTIC Science & Technology

2003-01-01

program manager for the overall effort. The carbon -phenolic cages were fabricated under the direction of Mr. Wei Shih of Allcomp Inc ., City of...friction. The early carbon -phenolic cages were hand wrapped by Allcomp . Since that time, Allcomp has added a wrapping machine that uses uniform tension...AFRL-PR-WP-TR-2003-2032 CARBON -PHENOLIC CAGES FOR HIGH-SPEED BEARINGS Part II - Bearing Evaluation with a Multiply- Alkylated Cyclopentane (MAC

Modeling of Rolling Element Bearing Mechanics: Computer Program Updates

NASA Technical Reports Server (NTRS)

Ryan, S. G.

1997-01-01

The Rolling Element Bearing Analysis System (REBANS) extends the capability available with traditional quasi-static bearing analysis programs by including the effects of bearing race and support flexibility. This tool was developed under contract for NASA-MSFC. The initial version delivered at the close of the contract contained several errors and exhibited numerous convergence difficulties. The program has been modified in-house at MSFC to correct the errors and greatly improve the convergence. The modifications consist of significant changes in the problem formulation and nonlinear convergence procedures. The original approach utilized sequential convergence for nested loops to achieve final convergence. This approach proved to be seriously deficient in robustness. Convergence was more the exception than the rule. The approach was changed to iterate all variables simultaneously. This approach has the advantage of using knowledge of the effect of each variable on each other variable (via the system Jacobian) when determining the incremental changes. This method has proved to be quite robust in its convergence. This technical memorandum documents the changes required for the original Theoretical Manual and User's Manual due to the new approach.

STS-134 crew during EVA TPS Overview training in the TPS/PABF

NASA Image and Video Library

2009-12-15

JSC2009-E-284896 (15 Dec. 2009) --- NASA astronauts Gregory H. Johnson (left), STS-134 pilot; along with astronauts Michael Fincke (center) and Greg Chamitoff, both mission specialists, participate in an EVA Thermal Protection System (TPS) overview training session in the TPS/ Precision Air Bearing Facility in the Space Vehicle Mock-up Facility at NASA?s Johnson Space Center.

STS-134 crew during EVA TPS Overview training in the TPS/PABF

NASA Image and Video Library

2009-12-15

JSC2009-E-284893 (15 Dec. 2009) --- NASA astronaut Gregory H. Johnson (right), STS-134 pilot; and European Space Agency astronaut Roberto Vittori, mission specialist, participate in an EVA Thermal Protection System (TPS) overview training session in the TPS/ Precision Air Bearing Facility in the Space Vehicle Mock-up Facility at NASA?s Johnson Space Center.

Teaching a Child with Autism and Severe Language Delays to Reject: Direct and Indirect Effects of Functional Communication Training

ERIC Educational Resources Information Center

Martin, Christian A.; Drasgow, Erik; Halle, James W.; Brucker, Jennifer M.

2005-01-01

We used functional communication training to teach Bob, a 10-year-old student with autism and severe language delays, to reject items by touching an icon. Our initial assessment revealed that Bob's behaviours serving a rejecting function consisted of pushing away, yelling, bear hugging-grabbing, and leaving. We used prompting, differential…

Seroprevalence of Toxoplasma gondii in American Black Bears ( Ursus americanus ) of the Central Appalachians, USA.

PubMed

Cox, John J; Murphy, Sean M; Augustine, Ben C; Guthrie, Joseph M; Hast, John T; Maehr, Sutton C; McDermott, Joseph

2017-07-01

We assessed Toxoplasma gondii seroprevalence in 53 free-ranging American black bears ( Ursus americanus ) in the Central Appalachian Mountains, US. Seroprevalence was 62% with no difference between males and females or between juvenile and adult bears. Wildlife agencies should consider warnings in hunter education programs to reduce the chances for human infection from this source.

Bearing tester data compilation, analysis and reporting and bearing math modeling, volume 1

NASA Technical Reports Server (NTRS)

Marshall, D. D.; Montgomery, E. E.; New, L. S.; Stone, M. A.; Tiller, B. K.

1984-01-01

Thermal and mechanical models of high speed angular contact ball bearings operating in LOX and LN2 were developed and verified with limited test data in an effort to further understand the parameters that determine or effect the SSME turbopump bearing operational characteristics and service life. The SHABERTH bearing analysis program which was adapted to evaluate shaft bearing systems in cryogenics is not capable of accommodating varying thermal properties and two phase flow. A bearing model with this capability was developed using the SINDA thermal analyzer. Iteration between the SHABERTH and the SINDA models enable the establishment of preliminary bounds for stable operation in LN2. These limits were established in terms of fluid flow, fluid inlet temperature, and axial load for a shaft speed of 30,000 RPM.

The determination of equivalent bearing loading for the BSMT that simulate SSME high pressure oxidizer turbopump conditions using the SHABERTH/SINDA computer programs

NASA Technical Reports Server (NTRS)

Mcdonald, Gary H.

1987-01-01

The MSFC bearing seal material tester (BSMT) can be used to evaluate the SSME high pressure oxygen turbopump (HPOTP) bearing performance. The four HPOTP bearings have both an imposed radial and axial load. These radial and axial loads are caused by the HPOTP's shaft, main impeller, preburner impeller, turbine and by the LOX coolant flow through the bearings, respectively. These loads coupled with bearing geometry and operating speed can define bearing contact angle, contact Hertz stress, and heat generation rates. The BSMT has the capability of operating at HPOTP shaft speeds, provide proper coolant flowrates but can only apply an axial load. Due to the inability to operate the bearings in the BSMT with an applied radial load, it is important to develop an equivalency between the applied axial loads and the actual HPOTP loadings. A shaft-bearing-thermal computer code (SHABERTH/SINDA) is used to simulate the BSMT bearing-shaft geometry and thermal-fluid operating conditions.

Computer-aided design analysis of 57-mm, angular-contact, cryogenic turbopump bearings

NASA Technical Reports Server (NTRS)

Armstrong, Elizabeth S.; Coe, Harold H.

1988-01-01

The Space Shuttle main engine high-pressure oxygen turbopumps have not experienced the sevice life required of them. This insufficiency has been due in part to the shortened life of the bearings. To improve the life of the existing turbopump bearings, an effort is under way to investigate bearing modifications that could be retrofitted into the present bearing cavity. Several bearing parameters were optimized using the computer program SHABERTH, which performs a thermomechanical simulation of a load support system. The computer analysis showed that improved bearing performance is feasible if low friction coefficients can be attained. Bearing geometries were optimized considering heat generation, equilibrium temperatures, and relative life. Thermal gradients through the bearings were found to be lower with liquid lubrication than with solid film lubrication, and a liquid oxygen coolant flowrate of approximately 4.0 kg/s was found to be optimal. This paper describes the analytical modeling used to determine these feasible modifications to improve bearing performance.

Calculation methods for steadily loaded, off-set pivot, tilting pad thrust bearings. (Guide to use of computer program A9235.)

NASA Astrophysics Data System (ADS)

1992-12-01

ESDU 92035 provides details of a FORTRAN program that implements the calculation method of ESDU 83004. It allows performance analysis of an existing design, or the design of a bearing dimensions, subject to any space constraint, are recommended. The predicted performance includes the lubricant film thickness under load, its temperature and flow rate, the power loss, and the bearing temperature. Recommendations are also made on surface finish. Warning messages are output in the following cases, for each of which possible remedial actions are suggested: drain or pad temperature too high, churning losses too great, film thickness too small, pad number too high, ratio or inner to outer pad radius too large, flow rate too great, lubricant or pad temperature outside usable range. A lubricant database is provided that may be extended or edited. The program applies to Newtonian lubricants in laminar flow. Worked examples illustrate the use of the program.

High-Temperature Magnetic Bearings Being Developed for Gas Turbine Engines

NASA Technical Reports Server (NTRS)

Kascak, Albert F.

1998-01-01

Magnetic bearings are the subject of a new NASA Lewis Research Center and U.S. Army thrust with significant industry participation, and cooperation with other Government agencies. The NASA/Army emphasis is on high-temperature applications for future gas turbine engines. Magnetic bearings could increase the reliability and reduce the weight of these engines by eliminating the lubrication system. They could also increase the DN (diameter of bearing times the rpm) limit on engine speed and allow active vibration cancellation systems to be used, resulting in a more efficient, "more electric" engine. Finally, the Integrated High Performance Turbine Engine Technology (IHPTET) program, a joint Department of Defense/industry program, identified a need for a high-temperature (1200 F) magnetic bearing that could be demonstrated in their Phase III engine. This magnetic bearing is similar to an electric motor. It has a laminated rotor and stator made of cobalt steel. Wound around the stator's circumference are a series of electrical wire coils which form a series of electric magnets that exert a force on the rotor. A probe senses the position of the rotor, and a feedback controller keeps it centered in the cavity. The engine rotor, bearings, and casing form a flexible structure with many modes. The bearing feedback controller, which could cause some of these modes to become unstable, could be adapted to varying flight conditions to minimize seal clearances and monitor the health of the system.

Bulk-Flow Analysis of Hybrid Thrust Bearings for Advanced Cryogenic Turbopumps

NASA Technical Reports Server (NTRS)

SanAndres, Luis

1998-01-01

A bulk-flow analysis and computer program for prediction of the static load performance and dynamic force coefficients of angled injection, orifice-compensated hydrostatic/hydrodynamic thrust bearings have been completed. The product of the research is an efficient computational tool for the design of high-speed thrust bearings for cryogenic fluid turbopumps. The study addresses the needs of a growing technology that requires of reliable fluid film bearings to provide the maximum operating life with optimum controllable rotordynamic characteristics at the lowest cost. The motion of a cryogenic fluid on the thin film lands of a thrust bearing is governed by a set of bulk-flow mass and momentum conservation and energy transport equations. Mass flow conservation and a simple model for momentum transport within the hydrostatic bearing recesses are also accounted for. The bulk-flow model includes flow turbulence with fluid inertia advection, Coriolis and centrifugal acceleration effects on the bearing recesses and film lands. The cryogenic fluid properties are obtained from realistic thermophysical equations of state. Turbulent bulk-flow shear parameters are based on Hirs' model with Moody's friction factor equations allowing a simple simulation for machined bearing surface roughness. A perturbation analysis leads to zeroth-order nonlinear equations governing the fluid flow for the thrust bearing operating at a static equilibrium position, and first-order linear equations describing the perturbed fluid flow for small amplitude shaft motions in the axial direction. Numerical solution to the zeroth-order flow field equations renders the bearing flow rate, thrust load, drag torque and power dissipation. Solution to the first-order equations determines the axial stiffness, damping and inertia force coefficients. The computational method uses well established algorithms and generic subprograms available from prior developments. The Fortran9O computer program hydrothrust runs on a Windows 95/NT personal computer. The program, help files and examples are licensed by Texas A&M University Technology License Office. The study of the static and dynamic performance of two hydrostatic/hydrodynamic bearings demonstrates the importance of centrifugal and advection fluid inertia effects for operation at high rotational speeds. The first example considers a conceptual hydrostatic thrust bearing for an advanced liquid hydrogen turbopump operating at 170,000 rpm. The large axial stiffness and damping coefficients of the bearing should provide accurate control and axial positioning of the turbopump and also allow for unshrouded impellers, therefore increasing the overall pump efficiency. The second bearing uses a refrigerant R134a, and its application in oil-free air conditioning compressors is of great technological importance and commercial value. The computed predictions reveal that the LH2 bearing load capacity and flow rate increase with the recess pressure (i.e. increasing orifice diameters). The bearing axial stiffness has a maximum for a recess pressure rati of approx. 0.55. while the axial damping coefficient decreases as the recess pressure ratio increases. The computer results from three flow models are compared. These models are a) inertialess, b) fluid inertia at recess edges only, and c) full fluid inertia at both recess edges and film lands. The full inertia model shows the lowest flow rates, axial load capacity and stiffness coefficient but on the other hand renders the largest damping coefficients and inertia coefficients. The most important findings are related to the reduction of the outflow through the inner radius and the appearance of subambient pressures. The performance of the refrigerant hybrid thrust bearing is evaluated at two operating speeds and pressure drops. The computed results are presented in dimensionless form to evidence consistent trends in the bearing performance characteristics. As the applied axial load increases, the bearing film thickness and flow rate decrease while the recess pressure increases. The axial stiffness coefficient shows a maximum for a certain intermediate load while the damping coefficient steadily increases. The computed results evidence the paramount of centrifugal fluid inertia at low recess pressures (i.e. low loads), and where there is actually an inflow through the bearing inner diameter, accompanied by subambient pressures just downstream of the bearing recess edge. These results are solely due to centrifugal fluid inertia and advection transport effects. Recommendations include the extension of the computer program to handle flexure pivot tilting pad hybrid bearings and the ability to calculate moment coefficients for shaft angular misalignments.

Investigation of a hydrostatic azimuth thrust bearing for a large steerable antenna

NASA Technical Reports Server (NTRS)

Rumbarger, J.; Castelli, V.; Rippel, H.

1972-01-01

The problems inherent in the design and construction of a hydrostatic azimuth thrust bearing for a tracking antenna of very large size were studied. For a load of 48,000,000 lbs., it is concluded that the hydrostatic bearing concept is feasible, provided that a particular multiple pad arrangement, high oil viscosity, and a particular load spreading arrangement are used. Presently available computer programs and techniques are deemed to be adequate for a good portion of the design job but new integrated programs will have to be developed in the area of the computation of the deflections of the supporting bearing structure. Experimental studies might also be indicated to ascertain the life characteristics of grouting under cyclic loading, and the optimization of hydraulic circuits and pipe sizes to insure the long life operation of pumps with high viscosity oil while avoiding cavitation.

Foil Bearing Coating Behavior in CO 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walker, Matthew; Kruizenga, Alan Michael; Pasch, James Jay

2017-08-01

The Sandia S-CO 2 Recompression Closed Brayton Cycle (RCBC) utilizes a series of gas foil bearings in its turbine-alternator-compressors. At high shaft rotational speed these bearings allow the shaft to ride on a cushion of air. Conversely, during startup and shutdown, the shaft rides along the foil bearing surface. Low-friction coatings are used on bearing surfaces in order to facilitate rotation during these periods. An experimental program was initiated to elucidate the behavior of coated bearing foils in the harsh environments of this system. A test configuration was developed enabling long duration exposure tests, followed by a range of analysesmore » relevant to their performance in a bearing. This report provides a detailed overview of this work. The results contained herein provide valuable information in selecting appropriate coatings for more advanced future bearing-rig tests at the newly established test facility in Sandia-NM.« less

Weight-bearing recommendations after operative fracture treatment-fact or fiction? Gait results with and feasibility of a dynamic, continuous pedobarography insole.

PubMed

Braun, Benedikt J; Veith, Nils T; Rollmann, Mika; Orth, Marcel; Fritz, Tobias; Herath, Steven C; Holstein, Jörg H; Pohlemann, Tim

2017-08-01

Rehabilitation after lower-extremity fractures is based on the physicians' recommendation for non-, partial-, or full weight-bearing. Clinical studies rely on this assumption, but continuous compliance or objective loading rates are unknown. The purpose of this study was to determine the compliance to weight-bearing recommendations by introducing a novel, pedobarography system continuously registering postoperative ground forces into ankle, tibial shaft and proximal femur fracture aftercare and test its feasibility for this purpose. In this prospective, observational study, a continuously measuring pedobarography insole was placed in the patients shoe during the immediate post-operative aftercare after ankle, tibial shaft and intertrochanteric femur fractures. Weight-bearing was ordered as per the institutional standard and controlled by physical therapy. The insole was retrieved after a maximum of six weeks (28 days [range 5-42 days]). Non-compliance was defined as a failure to maintain, or reach the ordered weight-bearing within 30%. Overall 30 patients were included in the study. Fourteen (47%) of the patients were compliant to the weight-bearing recommendations. Within two weeks after surgery patients deviated from the recommendation by over 50%. Sex, age and weight did not influence the performance (p > 0.05). Ankle fracture patients (partial weight-bearing) showed a significantly increased deviation from the recommendation (p = 0.01). Our study results show that, despite physical therapy training, weight-bearing compliance to recommended limits was low. Adherence to the partial weight-bearing task was further decreased over time. Uncontrolled weight-bearing recommendations should thus be viewed with caution and carefully considered as fiction. The presented insole is feasible to determine weight bearing continuously, could immediately help define real-time patient behaviour and establish realistic, individual weight-bearing recommendations.

Building Emotion and Affect Regulation (BEAR): Preliminary Evidence from an Open Trial in Children's Residential Group Homes in Singapore

ERIC Educational Resources Information Center

Pat-Horenczyk, R.; Shi, C. Sim Wei; Schramm-Yavin, S.; Bar-Halpern, M.; Tan, L. J.

2015-01-01

Background: The Building Emotion and Affect Regulation (BEAR) program is a theory-based group intervention for enhancing resilience in children, with a focus on strengthening emotion regulation. The BEAR is a 6-session protocol for children aged 7-12 who have been subject to traumatic life events. Objective: This paper presents the guiding…

STS-61 air-bearing floor training in bldg 9N with Astronaut Jeff Hoffman

NASA Image and Video Library

1993-06-07

S93-35696 (7 June 1993) --- Making use of the air-bearing floor in Johnson Space Center's (JSC) Shuttle Mockup and Integration Laboratory, astronaut Jeffrey A. Hoffman practices working with the Hubble Space Telescope's (HST) Wide Field/Planetary Camera (WF/PC). Hoffman is one of four mission specialists who will participate in HST servicing on the scheduled December mission. Changing out the large camera is one of several chores to be performed by the four. Photo credit: NASA

Stress-strain state of the structure in the service area of underground railway

NASA Astrophysics Data System (ADS)

Barabash, M.; Bashinsky, Y.; Korjakins, A.

2017-10-01

The paper focuses on numerical study how vibration due to underground trains influences the load-bearing building structures. Diagrams of vibration levels for monolithic floor slab depending on frequency are obtained. Levels of vibrations on floor slabs and columns are measured. The simulation of dynamic load from underground railway onto load-bearing building structures is presented as an example with account of load transmission through the soil. Recommendations for generation of design model in dynamic analysis of structure are provided.

Design of an oil squeeze film damper bearing for a multimass flexible-rotor bearing system

NASA Technical Reports Server (NTRS)

Cunningham, R. E.; Gunter, E. J., Jr.; Fleming, D. P.

1975-01-01

A single-mass flexible-rotor analysis was used to optimize the stiffness and damping of a flexible support for a symmetric five-mass rotor. The flexible, damped support attenuates the amplitudes of motions and forces transmitted to the support bearings when the rotor operates through and above its first bending critical speed. An oil squeeze film damper was designed based on short bearing lubrication theory. The damper design was verified by an unbalance response computer program. Rotor amplitudes were reduced by a factor of 16 and loads reduced by a factor of 36 compared with the same rotor with rigid bearing supports.

Anthropology and Geosciences: Training and Collaboration Advancing Interdisciplinary Research of Human-environment Interaction

NASA Astrophysics Data System (ADS)

Brondizio, E.; Moran, E.

2005-05-01

Over the past thirteen years the Anthropological Center for Training and Research on Global Environmental Change (ACT) at Indiana University has pioneered the use of anthropological and environmental research approaches to address issues of land use change, and population-environment interaction, particularly in the Amazon. Our research and training objectives focus on how particular local populations manage resources and how those activities may be studied by integrating time-tested ethnographic methods, survey instruments, ecological field studies, and the spatial and temporal perspectives of remote sensing and Geographical Information Systems. The globalization of the environment crisis bears the risk of the research and training at universities being purely global or large scale in nature. This would fail to take into account the highly variable local causes of human activities or to discover sustainable solutions to the use, conservation, and restoration of human ecosystems. Our approach combines institutional and international collaboration, formal and hands-on laboratory and field activities developed within an interdisciplinary environment, but based on the strength of disciplinary programs. Over the past years, we have particularly emphasized collaboration between American and Brazilian scholars and students and intense work with local farmers and communities both during data collection and field research, as well as in returning data and results using different formats. In this paper, we address our experience, the challenges and advantages of theoretical and methodological development for students approaching interdisciplinary problems, innovations in linking levels of analysis, and new opportunities for international and collaborative training and research on human-environment interaction.

Bone loss during partial weight bearing (1/6th gravity) is mitigated by resistance and aerobic exercise in mice

NASA Astrophysics Data System (ADS)

Boudreaux, R. D.; Metzger, C. E.; Macias, B. R.; Shirazi-Fard, Y.; Hogan, H. A.; Bloomfield, S. A.

2014-06-01

Astronauts on long duration missions continue to experience bone loss, as much as 1-2% each month, for up to 4.5 years after a mission. Mechanical loading of bone with exercise has been shown to increase bone formation, mass, and geometry. The aim of this study was to compare the efficacy of two exercise protocols during a period of reduced gravitational loading (1/6th body weight) in mice. Since muscle contractions via resistance exercise impart the largest physiological loads on the skeleton, we hypothesized that resistance training (via vertical tower climbing) would better protect against the deleterious musculoskeletal effects of reduced gravitational weight bearing when compared to endurance exercise (treadmill running). Young adult female BALB/cBYJ mice were randomly assigned to three groups: 1/6 g (G/6; n=6), 1/6 g with treadmill running (G/6+RUN; n=8), or 1/6 g with vertical tower climbing (G/6+CLB; n=9). Exercise was performed five times per week. Reduced weight bearing for 21 days was achieved through a novel harness suspension system. Treadmill velocity (12-20 m/min) and daily run time duration (32-51 min) increased incrementally throughout the study. Bone geometry and volumetric bone mineral density (vBMD) at proximal metaphysis and mid-diaphysis tibia were assessed by in vivo peripheral quantitative computed tomography (pQCT) on days 0 and 21 and standard dynamic histomorphometry was performed on undemineralized sections of the mid-diaphysis after tissue harvest. G/6 caused a significant decrease (P<0.001) in proximal tibia metaphysis total vBMD (-9.6%). These reductions of tibia metaphyseal vBMD in G/6 mice were mitigated in both G/6+RUN and G/6+CLB groups (P<0.05). After 21 days of G/6, we saw an absolute increase in tibia mid-diaphysis vBMD and in distal metaphysis femur vBMD in both G/6+RUN and G/6+CLB mice (P<0.05). Substantial increases in endocortical and periosteal mineralizing surface (MS/BS) at mid-diaphysis tibia in G/6+CLB demonstrate that bone formation can be increased even in the presence of reduced weight bearing. These data suggest that moderately vigorous endurance exercise and resistance training, through treadmill running or climb training mitigates decrements in vBMD during 21 days of reduced weight bearing. Consistent with our hypothesis, tower climb training, most pronounced in the tibia mid-diaphysis, provides a more potent osteogenic response compared to treadmill running.

Biofeedback device for patients on axillary crutches.

PubMed

Ang, E J; Goh, J C; Bose, K; Toh, S L; Choo, A

1989-08-01

The axillary crutch is commonly prescribed as an ambulatory aid to patients with temporal or permanent disability in the lower extremity. When fitting the axillary crutch, it is important that the user be instructed not to bear excessive weight on the axillary bar. Excessive weight bearing on the axillary bar can result in a sevenfold increase in the reaction force under the armpit. This force may be a contributory factor to crutch paralysis or thrombosis of the axillobrachial artery. In order to prevent this occurrence an electronic biofeedback device was designed and developed for use in the training of 3-point swing-through axillary crutch ambulation. It detects excessive weight bearing on the axillary bar during crutch ambulation and produces an audible signal which prompts the patient to make necessary adjustment to relieve load bearing on the axillary bar. The design and development of the biofeedback device is discussed in this paper.

How do psychiatrists in India construct their professional identity? A critical literature review

PubMed Central

Bayetti, Clement; Jadhav, Sushrut; Deshpande, Smita N.

2017-01-01

Psychiatric practice in India is marked by an increasing gulf between largely urban-based mental health professionals and a majority rural population. Based on the premise that any engagement is a mutually constructed humane process, an understanding of the culture of psychiatry including social process of local knowledge acquisition by trainee psychiatrists is critical. This paper reviews existing literature on training of psychiatrists in India, the cultural construction of their professional identities and autobiographical reflections. The results reveal a scarcity of research on how identities, knowledge, and values are constructed, contested, resisted, sustained, and operationalized through practice. This paper hypothesizes that psychiatric training and practice in India continues to operate chiefly in an instrumental fashion and bears a circular relationship between cultural, hierarchical training structures and patient–carer concerns. The absence of interpretative social science training generates a professional identity that predominantly focuses on the patient and his/her social world as the site of pathology. Infrequent and often superfluous critical cultural reflexivity gained through routine clinical practice further alienates professionals from patients, caregivers, and their own social landscapes. This results in a peculiar brand of theory and practice that is skewed toward a narrow understanding of what constitutes suffering. The authors argue that such omissions could be addressed through nuanced ethnographies on the professional development of psychiatrists during postgraduate training, including the political economies of their social institutions and local cultural landscapes. Further research will also help enhance culturally sensitive epistemology and shape locally responsive mental health training programs. This is critical for majority rural Indians who place their trust in State biomedical care. PMID:28529358

STS-135 crew during Ingress/Egress Timeline training in building 9NW space station mockups

NASA Image and Video Library

2011-04-29

JSC2011-E-043876 (29 April 2011) --- NASA astronauts Sandy Magnus and Rex Walheim (mostly out of frame at right), both STS-135 mission specialists, participate in an EVA Thermal Protection System (TPS) overview training session in the TPS/Precision Air Bearing Facility in the Space Vehicle Mock-up Facility at NASA's Johnson Space Center. Photo credit: NASA

STS-135 crew during Ingress/Egress Timeline training in building 9NW space station mockups

NASA Image and Video Library

2011-04-29

JSC2011-E-043872 (29 April 2011) --- NASA astronauts Sandy Magnus and Rex Walheim, both STS-135 mission specialists, participate in an EVA Thermal Protection System (TPS) overview training session in the TPS/Precision Air Bearing Facility in the Space Vehicle Mock-up Facility at NASA's Johnson Space Center. A crew instructor (right) assisted Magnus and Walheim. Photo credit: NASA

STS-134 crew during EVA TPS Overview training in the TPS/PABF

NASA Image and Video Library

2009-12-15

JSC2009-E-284898 (15 Dec. 2009) --- NASA astronauts Gregory H. Johnson (center), STS-134 pilot; and Michael Fincke (right), mission specialist; along with European Space Agency astronaut Roberto Vittori, mission specialist, participate in an EVA Thermal Protection System (TPS) overview training session in the TPS/ Precision Air Bearing Facility in the Space Vehicle Mock-up Facility at NASA?s Johnson Space Center.

STS-134 crew during EVA TPS Overview training in the TPS/PABF

NASA Image and Video Library

2009-12-15

JSC2009-E-284900 (15 Dec. 2009) --- NASA astronauts Gregory H. Johnson (center), STS-134 pilot; and Michael Fincke (right), mission specialist; along with European Space Agency astronaut Roberto Vittori, mission specialist, participate in an EVA Thermal Protection System (TPS) overview training session in the TPS/ Precision Air Bearing Facility in the Space Vehicle Mock-up Facility at NASA?s Johnson Space Center.

Tests of 38 Ball-Bearing Greases

NASA Technical Reports Server (NTRS)

Mcmurtrey, E. L.

1982-01-01

Report presents interim results in program of long-term tests of ball-bearing greases in vacuum, oxidizing, and otherwise hostile environment. Program is motivated by need for mechanisms that will operate for long periods in spacecraft or space stations. Class of lubricants based on perfluoroalkylpolyether (PFPE) with fluorotelomer thickeners has given best results in vacuum tests completed thus far. Test methods and performances of various lubricants could be of interest in automotive and industrial communities.

Prevention of Roller Bearing-Initiated Burnoffs in Railroad Freight Car Journals

DOT National Transportation Integrated Search

1979-01-01

The objective of this program was to determine the technical feasibility and cost effectiveness of constructing three separate devices for the prevention of catastrophic roller bearing-initiated, railroad journal failure. 1. Construction of a low cos...

Hybrid hydrostatic/ball bearings in high-speed turbomachinery

NASA Technical Reports Server (NTRS)

Nielson, C. E.

1983-01-01

A high speed, high pressure liquid hydrogen turbopump was designed, fabricated, and tested under a previous contract. This design was then modified to incorporate hybrid hydrostatic/ball bearings on both the pump end and turbine end to replace the original conventional ball bearing packages. The design, analysis, turbopump modification, assembly, and testing of the turbopump with hybrid bearings is presented here. Initial design considerations and rotordynamic performance analysis was made to define expected turbopump operating characteristics and are reported. The results of testing the turbopump to speeds of 9215 rad/s (88,000 rpm) using a wide range of hydrostatic bearing supply pressures are presented. The hydrostatic bearing test data and the rotordynamic behavior of the turbopump was closely analyzed and are included in the report. The testing of hybrid hydrostatic/ball bearings on a turbopump to the high speed requirements has indicated the configuration concept is feasible. The program has presented a great deal of information on the technology requirements of integrating the hybrid bearing into high speed turbopump designs for improved bearing life.

On the design and development of a miniature ceramic gimbal bearing

NASA Technical Reports Server (NTRS)

Hanson, Robert A.; Odwyer, Barry; Gordon, Keith M.; Jarvis, Edward W.

1990-01-01

A review is made of a program to develop ceramic gimbal bearings for a miniaturized missile guidance system requiring nonmagnetic properties and higher load capacity than possible with conventional AISI 440C stainless steel bearings. A new gimbal design concept is described which utilizes the compressive strength and nonmagnetic properties of silicon nitride (Si3N4) ceramics for the gimbal bearing. Considerable manufacturing development has occurred in the last 5 years making ceramic bearings a viable option in the gimbal design phase. A preliminary study into the feasibility of the proposed design is summarized. Finite element analysis of the brittle ceramic bearing components under thermal stress and high acceleration loading were conducted to ensure the components will not fail catastrophically in service. Finite element analysis was also used to optimize the adhesive joint design. Bearing torque tests run at various axial loads indicate that the average running torque of ceramic bearings varies with load similarly to that of conventional steel bearings.

Bearing fault diagnosis using a whale optimization algorithm-optimized orthogonal matching pursuit with a combined time-frequency atom dictionary

NASA Astrophysics Data System (ADS)

Zhang, Xin; Liu, Zhiwen; Miao, Qiang; Wang, Lei

2018-07-01

Condition monitoring and fault diagnosis of rolling element bearings are significant to guarantee the reliability and functionality of a mechanical system, production efficiency, and plant safety. However, this is almost invariably a formidable challenge because the fault features are often buried by strong background noises and other unstable interference components. To satisfactorily extract the bearing fault features, a whale optimization algorithm (WOA)-optimized orthogonal matching pursuit (OMP) with a combined time-frequency atom dictionary is proposed in this paper. Firstly, a combined time-frequency atom dictionary whose atom is a combination of Fourier dictionary atom and impact time-frequency dictionary atom is designed according to the properties of bearing fault vibration signal. Furthermore, to improve the efficiency and accuracy of signal sparse representation, the WOA is introduced into the OMP algorithm to optimize the atom parameters for best approximating the original signal with the dictionary atoms. The proposed method is validated through analyzing the bearing fault simulation signal and the real vibration signals collected from an experimental bearing and a wheelset bearing of high-speed trains. The comparisons with the respect to the state of the art in the field are illustrated in detail, which highlight the advantages of the proposed method.

New challenges for grizzly bear management in Yellowstone National Park

USGS Publications Warehouse

van Manen, Frank T.; Gunther, Kerry A.

2016-01-01

A key factor contributing to the success of grizzly bear Ursus arctos conservation in the Greater Yellowstone Ecosystem has been the existence of a large protected area, Yellowstone National Park. We provide an overview of recovery efforts, how demographic parameters changed as the population increased, and how the bear management program in Yellowstone National Park has evolved to address new management challenges over time. Finally, using the management experiences in Yellowstone National Park, we present comparisons and perspectives regarding brown bear management in Shiretoko National Park.

Finite-Difference Solutions of the Alternate Turbopump Development High-Pressure Oxidizer Turbopump Pump-End Ball-Bearing Cavity Flows

NASA Technical Reports Server (NTRS)

Benjamin, Theodore G.; Garcia, Roberto; Mcconnaughey, Paul K.; Wang, Ten-See; Vu, Bruce T.; Dakhoul, Youssef

1993-01-01

These analyses were undertaken to aid in the understanding of flow phenomena in the Alternate Turbopump Development (ATD) High-pressure Oxidizer Turbopump (HPOTP) Pump-end ball bearing (PEBB) cavities and their roles in turbopump vibration initiation and bearing distress. This effort was being performed to provide timely support to the program in a decision as to whether or not the program should be continued. In the first case, it was determined that a change in bearing through flow had no significant effect on axial preload. This was a follow-on to a previous study which had resulted in a redesign of the bearing exit cavity which virtually eliminated bearing axial loading. In the second case, a three-dimensional analysis of the inner-race-guided cage configuration was performed so as to determine the pressure distribution on the outer race when the shaft is 0.0002 inches off-center. The results indicate that there is virtually no circumferential pressure difference caused by the offset to contribute to bearing tilt. In the third case, axisymmetric analyses were performed on an outer-race guided cage configuration to determine the magnitude of tangential flow entering the bearing. The removed-shoulder case was analyzed as was the static diverter case. A third analysis where the preload spring was shielded by a sheet of metal for the baseline case was also performed. It was determined that the swirl entering the bearing was acceptable and the project decided to use the outer-race-guided cage configuration. In the fourth case, more bearing configurations were analyzed. These analyses included thermal modeling so as to determine the added benefit of injecting colder fluid directly onto the bearing inner-race contact area. The results of these analyses contributed to a programmatic decision to include coolant injection in the design.

Seasonal variation in American black bear Ursus americanus activity patterns: Quantification via remote photography

USGS Publications Warehouse

Bridges, A.S.; Vaughan, M.R.; Klenzendorf, S.

2004-01-01

Activity pattern plasticity may serve as an evolutionary adaptation to optimize fitness in an inconstant environment, however, quantifying patterns and demonstrating variation can be problematic. For American black bears Ursus americanus, wariness and habitat inaccessibility further complicate quantification. Radio telemetry has been the primary technique used to examine activity, however, interpretation error and limitation on numbers of animals available to monitor prevent extrapolation to unmarked or untransmittered members of the population. We used remote cameras to quantify black bear activity patterns and examined differences by season, sex and reproductive class in the Alleghany Mountains of western Virginia, USA. We used 1,533 pictures of black bears taken during 1998-2002 for our analyses. Black bears generally were diurnal in summer and nocturnal in autumn with a vespertine activity peak during both seasons. Bear-hound training seasons occurred during September and may offer explanation for the observed shift towards nocturnal behaviour. We found no substantial differences in activity patterns between sex and reproductive classes. Use of remote cameras allowed us to efficiently sample larger numbers of individual animals and likely offered a better approximation of population-level activity patterns than individual-level, telemetry-based methodologies.

Evaluation of effectiveness of wavelet based denoising schemes using ANN and SVM for bearing condition classification.

PubMed

Vijay, G S; Kumar, H S; Srinivasa Pai, P; Sriram, N S; Rao, Raj B K N

2012-01-01

The wavelet based denoising has proven its ability to denoise the bearing vibration signals by improving the signal-to-noise ratio (SNR) and reducing the root-mean-square error (RMSE). In this paper seven wavelet based denoising schemes have been evaluated based on the performance of the Artificial Neural Network (ANN) and the Support Vector Machine (SVM), for the bearing condition classification. The work consists of two parts, the first part in which a synthetic signal simulating the defective bearing vibration signal with Gaussian noise was subjected to these denoising schemes. The best scheme based on the SNR and the RMSE was identified. In the second part, the vibration signals collected from a customized Rolling Element Bearing (REB) test rig for four bearing conditions were subjected to these denoising schemes. Several time and frequency domain features were extracted from the denoised signals, out of which a few sensitive features were selected using the Fisher's Criterion (FC). Extracted features were used to train and test the ANN and the SVM. The best denoising scheme identified, based on the classification performances of the ANN and the SVM, was found to be the same as the one obtained using the synthetic signal.

Earth Scanner Bearing Accelerated Life Test

NASA Technical Reports Server (NTRS)

Dietz, Brian J.; VanDyk, Steven G.; Predmore, Roamer E.

2000-01-01

The Moderate Resolution Imaging Spectrometer (MODIS) optical instrument for NASA Goddard will measure biological and physical processes on the Earth's surface and in the lower atmosphere. A key component of the instrument is an extremely accurate scan mirror motor/encoder assembly. Of prime concern in the performance and reliability of the scan motor/encoder is bearing selection and lubrication. This paper describes life testing of the bearings and lubrication selected for the program.

Rehabilitation of Neuromotor Disabilities in Aquatic Microgravity Environment.

PubMed

Barassi, Giovanni; Bellomo, Rosa Grazia; Porreca, Annamaria; Giannuzzo, Giuseppe; Irace, Giuseppe; Trivisano, Leonardo; Saggini, Raoul

2018-02-28

The aquatic environment has a high potential in rehabilitation treatment of acute lesions and in chronic diseases. The Safe Bearing Back method is proposed to stimulate the reorganization of deteriorated sensory neuromotor skills. The aim of the present study was to verify the effectiveness and the long-term maintenance of the benefits of a specific thermal rehabilitation training in neuromotor and neurological disabilities. Seventy four patients were evaluated using the Functional Independence Measure (FIM), Tinetti Gait-Balance Scale (TIN), and Visual Analog Scale (VAS) for pain. In addition, a general health index was developed, conceived as a linear combination, with unit weights, of the normalized FIM, TIN, and VAS indicators. Measurements were made at T1 (baseline before treatment), T2 (after a five-month treatment, which was the end of treatment), and T3 (6 months after the end of treatment). Self-sufficiency, walking ability, and subjective pain perception were improved after the treatment. The improvement tapered off during the six-month-long follow-up, but the patients' condition remained well compared with the baseline level before the implementation of the treatment program. We conclude that hydrokinesitherapy with the Safe Bearing Back method demonstrates is clearly effective in the immediate and medium-term rehabilitation of neuromotor diseases.

Preventing maternal and early childhood obesity: the fetal flaw in Australian perinatal care.

PubMed

Miller, Margaret; Hearn, Lydia; van der Pligt, Paige; Wilcox, Jane; Campbell, Karen J

2014-01-01

Almost half of Australian women of child-bearing age are overweight or obese, with a rate of 30-50% reported in early pregnancy. Maternal adiposity is a costly challenge for Australian obstetric care, with associated serious maternal and neonatal complications. Excess gestational weight gain is an important predictor of offspring adiposity into adulthood and higher maternal weight later in life. Current public health and perinatal care approaches in Australia do not adequately address excess perinatal maternal weight or gestational weight gain. This paper argues that the failure of primary health-care providers to offer systematic advice and support regarding women's weight and related lifestyle behaviours in child-bearing years is an outstanding 'missed opportunity' for prevention of inter-generational overweight and obesity. Barriers to action could be addressed through greater attention to: clinical guidelines for maternal weight management for the perinatal period, training and support of maternal health-care providers to develop skills and confidence in raising weight issues with women, a variety of weight management programs provided by state maternal health services, and clear referral pathways to them. Attention is also required to service systems that clearly define roles in maternal weight management and ensure consistency and continuity of support across the perinatal period.

Investigation of acoustic emission coupling techniques

NASA Technical Reports Server (NTRS)

Jolly, W. D.

1988-01-01

A three-phase research program was initiated by NASA in 1983 to investigate the use of acoustic monitoring techniques to detect incipient failure in turbopump bearings. Two prototype acoustic coupler probes were designed and evaluated, and four units of the final probe design were fabricated. Success in this program could lead to development of an on-board monitor which could detect bearing damage in flight and reduce or eliminate the need for disassembly after each flight. This final report reviews the accomplishments of the first two phases and presents the results of fabrication and testing completed in the final phase of the research program.

Intelligent fault diagnosis of rolling bearings using an improved deep recurrent neural network

NASA Astrophysics Data System (ADS)

Jiang, Hongkai; Li, Xingqiu; Shao, Haidong; Zhao, Ke

2018-06-01

Traditional intelligent fault diagnosis methods for rolling bearings heavily depend on manual feature extraction and feature selection. For this purpose, an intelligent deep learning method, named the improved deep recurrent neural network (DRNN), is proposed in this paper. Firstly, frequency spectrum sequences are used as inputs to reduce the input size and ensure good robustness. Secondly, DRNN is constructed by the stacks of the recurrent hidden layer to automatically extract the features from the input spectrum sequences. Thirdly, an adaptive learning rate is adopted to improve the training performance of the constructed DRNN. The proposed method is verified with experimental rolling bearing data, and the results confirm that the proposed method is more effective than traditional intelligent fault diagnosis methods.

Life of Pennzane and 815Z-Lubricated Instrument Bearings Cleaned with Non-CFC Solvents

NASA Technical Reports Server (NTRS)

Loewenthal, Stuart; Jones, William; Predmore, Roamer

1999-01-01

This report takes the form of two papers: (1) "Life of Pennzane and 815Z-Lubricated Instrument Bearings cleaned with Non-CFC Solvents" and (2) a published paper, entitled "Instrument bearing life with NON-CFC cleaners". Abstract for paper # 1 : Bearings used in spacecraft mechanisms have historically been cleaned with chlorofluorocarbon CFC-1 13 (Freon) solvents and lubricated with a perfluorinated polyalkylether (PFPE) oils like 815-Z. Little full-scale bearing life test data exists to evaluate the effects of the newer class environmental-friendly bearing cleaners or improved synthetic hydrocarbon space oils like Pennzane. To address the lack of data, a cooperative, bearing life test program was initiated between NASA, Lockheed Martin and MPB. The objective was to obtain comparative long-term, life test data for flight-quality bearings, cleaned with non-CFC solvents versus CFC-1 13 under flight-like conditions with two space oils. A goal was to gain a better understanding of the lubricant surface chemistry effects with such solvents. A second objective was to obtain well-controlled, full-scale bearing life test data with a relatively new synthetic oil (Pennzane), touted as an improvement to Bray 815Z, an oil with considerable space flight history. The second paper, which serves as an attachment, is abstracted below: Bearings used in spacecraft mechanisms have historically been cleaned with chlorofluorocarbon CFC-113 (Freon) solvents and lubricated with a perfluorinated polyalkylether (PFPE) oils like 815-Z. Little full-scale bearing life test data exists to evaluate the effects of the newer class environmental-friendly bearing cleaners or improved synthetic hydrocarbon space oils like Pennzane. To address the lack of data, a cooperative, bearing life test program was initiated between NASA, Lockheed Martin and MPB. The objective was to obtain comparative long-term, life test data for flight-quality bearings, cleaned with non-CFC solvents versus CFC-1 13 under flight-like conditions with two space oils. A goal was to gain a better understanding of the lubricant surface chemistry effects with such solvents. A second objective was to obtain well-controlled, full-scale bearing life test data with a relatively new synthetic oil (Pennzane), touted as an improvement to Bray 815Z, an oil with considerable space flight history.

Review of the randomized clinical stroke rehabilitation trials in 2009

PubMed Central

Rabadi, Meheroz H.

2011-01-01

Summary Background Recent review of the available evidence on interventions for motor recovery after stroke, showed that improvements in recovery of arm function were seen for constraint-induced movement therapy, electromyographic biofeedback, mental practice with motor imagery, and robotics. Similar improvement in transfer ability or balance were seen with repetitive task training, biofeedback, and training with a moving platform. Walking speed was improved by physical fitness training, high-intensity physiotherapy and repetitive task training. However, most of these trials were small and had design limitations. Material/Methods In this article, randomized control trials (RCT’s) published in 2009 of rehabilitation therapies for acute (≤2 weeks), sub-acute (2 to 12 weeks) and chronic (≥12 weeks) stroke was reviewed. A Medline search was performed to identify all RCT’s in stroke rehabilitation in the year 2009. The search strategy that was used for PubMed is presented in the Appendix 1. The objective was to examine the effectiveness of these treatment modalities in stroke rehabilitation. Results This generated 35 RCT’s under 5 categories which were found and analyzed. The methodological quality was assessed by using the PEDro scale for external and internal validity. Conclusions These trials were primarily efficacy studies. Most of these studies enrolled small numbers of patient which precluded their clinical applicability (limited external validity). However, the constraint induced movement therapy (CIT), regularly used in chronic stroke patients did not improve affected arm-hand function when used in acute stroke patients at ≤4 weeks. Intensive CIT did not lead to motor improvement in arm-hand function. Robotic arm treatment helped decrease motor impairment and improved function in chronic stroke patients only. Therapist provided exercise programs (when self-administered by patients during their off-therapy time in a rehabilitation setting) did improve arm-hand function. Tai Chi exercises helped improve balance and weight bearing. Exercise programs for community dwelling stroke patient helped maintain and even improve their functional state. PMID:21278702

Review of the randomized clinical stroke rehabilitation trials in 2009.

PubMed

Rabadi, Meheroz H

2011-02-01

Recent review of the available evidence on interventions for motor recovery after stroke, showed that improvements in recovery of arm function were seen for constraint-induced movement therapy, electromyographic biofeedback, mental practice with motor imagery, and robotics. Similar improvement in transfer ability or balance were seen with repetitive task training, biofeedback, and training with a moving platform. Walking speed was improved by physical fitness training, high-intensity physiotherapy and repetitive task training. However, most of these trials were small and had design limitations. In this article, randomized control trials (RCT's) published in 2009 of rehabilitation therapies for acute (≤ 2 weeks), sub-acute (2 to 12 weeks) and chronic (≥ 12 weeks) stroke was reviewed. A Medline search was performed to identify all RCT's in stroke rehabilitation in the year 2009. The search strategy that was used for PubMed is presented in the Appendix 1. The objective was to examine the effectiveness of these treatment modalities in stroke rehabilitation. This generated 35 RCT's under 5 categories which were found and analyzed. The methodological quality was assessed by using the PEDro scale for external and internal validity. These trials were primarily efficacy studies. Most of these studies enrolled small numbers of patient which precluded their clinical applicability (limited external validity). However, the constraint induced movement therapy (CIT), regularly used in chronic stroke patients did not improve affected arm-hand function when used in acute stroke patients at ≤ 4 weeks. Intensive CIT did not lead to motor improvement in arm-hand function. Robotic arm treatment helped decrease motor impairment and improved function in chronic stroke patients only. Therapist provided exercise programs (when self-administered by patients during their off-therapy time in a rehabilitation setting) did improve arm-hand function. Tai Chi exercises helped improve balance and weight bearing. Exercise programs for community dwelling stroke patient helped maintain and even improve their functional state.

Fluorine lubricated bearing technology

NASA Technical Reports Server (NTRS)

Mallaire, F. R.

1973-01-01

An experimental program was conducted to evaluate and select materials for ball bearings intended for use in liquid fluorine and/or FLOX. The ability of three different ball-separator materials, each containing nickel, to form and transfer a nickel fluoride film to provide effective lubrication at the required areas of a ball bearing operating in liquid fluorine was evaluated. In addition, solid lubrication of a ball bearing operating in liquid fluorine by either a fused fluoride coating applied to all surfaces of the ball separator or by a fluoride impregnation of porous sintered material ball separators was evaluated. Less bearing wear occurred when tests were conducted in the less reactive FLOX. Bearings fabricated from any of the materials tested would have relatively short wear lives and would require frequent replacement in a reusable engine.

Groundwater quality in the Bear Valley and Lake Arrowhead Watershed, California

USGS Publications Warehouse

Mathany, Timothy; Burton, Carmen; Fram, Miranda S.

2017-06-20

Groundwater provides more than 40 percent of California’s drinking water. To protect this vital resource, the State of California created the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The Priority Basin Project of the GAMA Program provides a comprehensive assessment of the State’s groundwater quality and increases public access to groundwater-quality information. The Bear Valley and Lake Arrowhead Watershed study areas in southern California compose one of the study units being evaluated.

Flexible rotor dynamics analysis

NASA Technical Reports Server (NTRS)

Shen, F. A.

1973-01-01

A digital computer program was developed to analyze the general nonaxisymmetric and nonsynchronous transient and steady-state rotor dynamic performance of a bending- and shear-wise flexible rotor-bearing system under various operating conditions. The effects of rotor material mechanical hysteresis, rotor torsion flexibility, transverse effects of rotor axial and torsional loading and the anisotropic, in-phase and out-of-phase bearing stiffness and damping force and moment coefficients were included in the program to broaden its capability. An optimum solution method was found and incorporated in the computer program. Computer simulation of experimental data was made and qualitative agreements observed. The mathematical formulations, computer program verification, test data simulation, and user instruction was presented and discussed.

Modeling of rolling element bearing mechanics

NASA Technical Reports Server (NTRS)

Greenhill, L. M.

1991-01-01

Roller element bearings provide the primary mechanical interface between rotating and nonrotating components in the high performance turbomachinery of the Space Shuttle Main Engine (SSME). Knowledge of bearing behavior under various loading and environmental conditions is essential to predicting and understanding the overall behavior of turbopumps, including rotordynamic stability, critical speeds and bearing life. The objective is to develop mathematical models and computer programs to describe the mechanical behavior of ball and cylinder roller bearings under the loading and environmental conditions encountered in the SSME and future high performance rocket engines. This includes characteristics such as nonlinear load/motion relationships, stiffness and damping, rolling element loads for life prediction, and roller and cage stability.

STS-135 crew during Ingress/Egress Timeline training in building 9NW space station mockups

NASA Image and Video Library

2011-04-29

JSC2011-E-043869 (29 April 2011) --- NASA astronauts Sandy Magnus and Rex Walheim, both STS-135 mission specialists, participate in an EVA Thermal Protection System (TPS) overview training session in the TPS/Precision Air Bearing Facility in the Space Vehicle Mock-up Facility at NASA's Johnson Space Center. A model of a space shuttle is in the foreground. Photo credit: NASA

STS-134 crew during EVA TPS Overview training in the TPS/PABF

NASA Image and Video Library

2009-12-15

JSC2009-E-284895 (15 Dec. 2009) --- NASA astronauts Gregory H. Johnson (left), STS-134 pilot; along with astronauts Michael Fincke, Greg Chamitoff and Andrew Feustel (mostly out of frame), all mission specialists, participate in an EVA Thermal Protection System (TPS) overview training session in the TPS/ Precision Air Bearing Facility in the Space Vehicle Mock-up Facility at NASA?s Johnson Space Center.

40 CFR 146.32 - Construction requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... during drillings. (c) Where the injection zone is a formation which is naturally water-bearing the... characteristics of the formation fluids. (d) Where the injection formation is not a water-bearing formation, the... Section 146.32 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS...

Bearing Tester Data Compilation Analysis, and Reporting and Bearing Math Modeling

NASA Technical Reports Server (NTRS)

1985-01-01

The magnitude and direction of fluid induced torques and forces on the 57 mm bearing cage is considered to be a contributing factor in possible cage instabilities that can produce intermittent high heating in the bearing. Analyses of the fluid forces and torques are presented. Heat generated by viscous fluid work was estimated for two flow diverter configurations and a coolant flow of 10 lbs/sec to support the thermal evaluation of the LOX Bearing Materials Tester. Results of the analysis of the LOX turbopump turbine end bearings are discussed. Coolant velocities for the no. 4 LOX turbopump turbine end bearings were estimated as a function of shaft speed and coolant flow rate. Contact angles and track width data were developed for the 57 mm bearing as functions of shaft speed, and axial and radial loads. The Advanced Dynamics of Rolling Elements (ADORE) computer program was installed on the MSFC UNIVAC 1100 and a test case successfully run. Both the text output and the plotting output were verified. The Bearing Seal and Materials Tester - Test Condition Data Base was developed. The parametric analysis of the operating characteristics of the LOX turbopump pump end bearing using the 45 mm bearing thermal model was begun.

Mixed Lubrication Simulation of Hydrostatic Spherical Bearings for Hydraulic Piston Pumps and Motors

NASA Astrophysics Data System (ADS)

Kazama, Toshiharu

Mixed and fluid film lubrication characteristics of hydrostatic spherical bearings for swash-plate-type axial piston pumps and motors are studied theoretically under non-steady-state conditions. The basic equations incorporating interference and contact of surface roughness are derived fundamentally through combination of the GW and PC models. Furthermore, a programming code that is applicable to the caulked-socket-type and open-socket-type bearings is developed. Effects of caulking, operating conditions, and the bearing dimension on the motion of the sphere and tribological performance of the bearings are examined. Salient conclusions are the following: The sphere's eccentricity increases in the low supply pressure period. The time-lag of the load change engenders greater motion of the sphere. Caulking of the bearing socket suppresses the sphere's motion. The bearing stiffness increases and power loss decreases for smaller recess angles. Minimum power loss is given under the condition that the bearing socket radius nearly equals the equivalent load radius.

Water-Resources Investigations in Tennessee: Programs and Activities of the U.S. Geological Survey, 1992-94

DTIC Science & Technology

1995-01-01

rainfall runoff model, DR&& to Bear Branch watershed, Murfreesboro, Tennessee .......... 37 Seepage and spring inventory reconnaissance and base-flow... bearing rocks in the Valley and Ridge, Blue Ridge, and Piedmont physiographic provinces, and covers parts of eight states from New Jersey to Alabama...100 feet in diameter and about 250 feet deep. It penetrates three water- bearing units of carbonate origin (the shallow aquifer, the Manchester aquifer

Dual load path ball screw with rod end swivel

NASA Technical Reports Server (NTRS)

Wngett, Paul (Inventor)

2002-01-01

A dual drive ball has a ball screw shaft coupled at one end to a gear train and coupled at the other end to a ball screw nut. The ball screw shaft and ball screw nut are connected through complementary helical grooves filled with ball bearing balls. The outer surface of the ball screw nut is plined and can be driven by a second gear train. An output tube is coupled at one end to the ball screw nut and at its opposite end has a connector portion with a groove on its inner surface. A rod end has a coupling member for coupling to a surface to be actuated and a shaft portion with a groobe on its outer surface. This shaft portion is received with in the outputtube portion and the corresponding grooves are coupled through the use of a plurality of ball bearing balls.

Feasibility of Using Tetrax Biofeedback Video Games for Balance Training in Patients With Chronic Hemiplegic Stroke.

PubMed

Hung, Jen-Wen; Yu, Min-Yuan; Chang, Ku-Chou; Lee, Hsuei-Chen; Hsieh, Yen-Wei; Chen, Po-Chih

2016-10-01

Decreased weight bearing on the affected lower limb and poor weight shifting are common after a stroke occurs. The Tetrax biofeedback system is a center-of-pressure controlled video game system designed for patients with balance deficits. Although it is a commercial product, information about its clinical use for patients affected by stroke is limited. To investigate the feasibility and potential efficacy of the Tetrax biofeedback system for balance training in patients with chronic stroke. Feasibility study. Rehabilitation department of a medical center. Participants who had sustained a hemiplegic stroke at least 6 months prior to enrollment but were still able to stand independently for more than 5 minutes. Participants were randomly assigned to an intervention group (IG) or control group (CG). All participants received conventional rehabilitation training. The IG also received 20 minutes of exposure to Tetrax biofeedback games controlled by change in center of pressure 3 times a week for 6 weeks. The primary outcome was feasibility, addressed by adherence, safety, and satisfaction. The secondary outcome was efficacy, which was evaluated by the subtests of physiological profile assessment, posturography, Timed Up and Go, and Forward Reach tests. We used percentage change (post-training score - pretraining score/pretraining score) to quantify the intervention effects. Mann-Whitney U tests were used to analyze differences in percentage of change between groups. A total of 14 participants were assigned to the IG, and 13 were assigned to the CG; 12 participants in the IG and 11 in the CG completed the study. In the IG group, those who completed the 6-week intervention attended 89.5% of planned sessions. No major adverse events or falls occurred within the intervention sessions. With use of 5-point Likert scales, participants rated their enjoyment of Tetrax games as 4.33 ± 0.78, their motivation as 4.17 ± 1.03, and perceived helpfulness as 4.25 ± 0.97. The IG demonstrated a significantly greater improvement in reaction time (P = .002), proprioception (P < .001), symmetric weight bearing (P = .027), Timed Up and Go (P < .001), and Forward Reach (P < .001) compared with the CG. Using Tetrax biofeedback video games for balance training is a feasible adjunctive program that may augment conventional therapy in persons affected by chronic hemiplegic stroke. II. Copyright © 2016 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

Program for the improvement of downhole drilling motor bearings and seals. Phase IV. Semi-annual report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tibbitts, G.A.; DeLafosse, P.H.; Black, A.

1980-07-01

Four main areas of development for the project are covered: design and fabrication of a dynamometer and a mud cooling system for the Bearing-Seal Package Test Facility; modification of the Bearing-Seal Package Test Facility based on test results; testing of new lubricant samples from Pacer Lubricants, Inc., in the Terra Tek High Temperature Lubricant Tester; and testing of new seal types in the Terra Tek Sea Tester. The Maurer Engineering Report, Semi-Annual Progress Report on Improvement of Downhole Motor Bearings and Seals by Jeff L. Barnwell, has been included as Appendix B.

Development of a magnetically suspended momentum wheel

NASA Technical Reports Server (NTRS)

Hamilton, S. B.

1973-01-01

An engineering model of a magnetically suspended momentum wheel was designed, fabricated, and tested under laboratory conditions. The basic unit consisted of two magnet bearings, a sculptured aluminum rotor, brushless dc spin motor, and electronics. The magnet bearings, utilizing rare-earth cobltrat-samarium magnets were active radially and passive axially. The results of the program showed that momentum wheels with magnetic bearings are feasible and operable, and that magnetic bearings of this type are capable of being used for applications where high capacity, high stiffness, and low power consumption are required. The tests performed developed criteria for improved performance for future designs.

Alternate bearing design fabrication and test program, exhibit B

NASA Technical Reports Server (NTRS)

1978-01-01

A 50 ft-lb-sec (FPS) reaction wheel was modified with an ironless armature brushless dc motor and a magnetic bearing suspension. The purpose was to demonstrate the performance of an alternate bearing concept, i.e., a magnetic bearing suspension, which could be used in Skylab type CMG's to meet the attitude control requirements of long term space stations. A magnetic suspension was built, installed and tested in the 50 FPS reaction wheel. A secondary effort included the build and test of a compatible reaction wheel motor. Performance characteristics of both are presented and discussed.

34 CFR 642.1 - Training Program for Federal TRIO Programs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... these regulations as the Training Program—provides Federal financial assistance to train the staff and... 34 Education 3 2010-07-01 2010-07-01 false Training Program for Federal TRIO Programs. 642.1... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION TRAINING PROGRAM FOR FEDERAL TRIO PROGRAMS General § 642.1...

9 CFR 316.3 - Use of official marks prohibited except under supervision of Program employee; removal of...

Code of Federal Regulations, 2013 CFR

2013-01-01

... abbreviation or simulation of any official mark, to or on any product, or container thereof, except under the... product, any container bearing or intended to bear any official mark, or any abbreviation or simulation of...

9 CFR 316.3 - Use of official marks prohibited except under supervision of Program employee; removal of...

Code of Federal Regulations, 2011 CFR

2011-01-01

... abbreviation or simulation of any official mark, to or on any product, or container thereof, except under the... product, any container bearing or intended to bear any official mark, or any abbreviation or simulation of...

9 CFR 316.3 - Use of official marks prohibited except under supervision of Program employee; removal of...

Code of Federal Regulations, 2012 CFR

2012-01-01

... abbreviation or simulation of any official mark, to or on any product, or container thereof, except under the... product, any container bearing or intended to bear any official mark, or any abbreviation or simulation of...

9 CFR 316.3 - Use of official marks prohibited except under supervision of Program employee; removal of...

Code of Federal Regulations, 2010 CFR

2010-01-01

... abbreviation or simulation of any official mark, to or on any product, or container thereof, except under the... product, any container bearing or intended to bear any official mark, or any abbreviation or simulation of...

9 CFR 316.3 - Use of official marks prohibited except under supervision of Program employee; removal of...

Code of Federal Regulations, 2014 CFR

2014-01-01

... abbreviation or simulation of any official mark, to or on any product, or container thereof, except under the... product, any container bearing or intended to bear any official mark, or any abbreviation or simulation of...

New generation methods for spur, helical, and spiral-bevel gears

NASA Technical Reports Server (NTRS)

Litvin, F. L.; Tsung, W.-J.; Coy, J. J.; Handschuh, R. F.; Tsay, C.-B. P.

1986-01-01

New methods for generating spur, helical, and spiral-bevel gears are proposed. These methods provide the gears with conjugate gear tooth surfaces, localized bearing contact, and reduced sensitivity to gear misalignment. Computer programs have been developed for simulating gear meshing and bearing contact.

New generation methods for spur, helical, and spiral-bevel gears

NASA Technical Reports Server (NTRS)

Litvin, F. L.; Tsung, W.-J.; Coy, J. J.; Handschuh, R. F.; Tsay, C.-B. P.

1987-01-01

New methods for generating spur, helical, and spiral-bevel gears are proposed. These methods provide the gears with conjugate gear tooth surfaces, localized bearing contact, and reduced sensitivity to gear misalignment. Computer programs have been developed for simulating gear meshing and bearing contact.

Tractor Trailer Driver's Training Programs. Performance Report.

ERIC Educational Resources Information Center

New Hampshire Vocational Technical Coll., Nashua.

This document describes a project to develop a 320-hour tractor trailer driver training program and a 20-hour commercial driver licensing upgrade training program. Of 34 graduates from the training program, 28 secured employment in the trucking industry. From August 1989 to June 1990, 725 students were trained in the upgrade training program with…

Long-Term Macroevaluation of Environmental Enrichment in Three Brown Bears (Ursus arctos) at Barcelona Zoo.

PubMed

Soriano, Ana I; Vinyoles, Dolors; Maté, Carmen

2016-01-01

The evaluation of enrichment programs is important to determine their effect on nonhuman animal welfare. The daily activity pattern and use of space of 3 brown bears (Ursus arctos) were used for long-term macroevaluation of enrichment to compare the baseline and enrichment phases. Focal sampling methods were used for data collection, and instantaneous scans were made at 2-min intervals during 15 sessions of 1 hr for each animal during the 2 study periods. The enrichment devices were categorized as feeding, occupational, and sensorial. The long-term macroevaluation in 3 bears showed statistically significant differences in some types of activity but not in others. There were also statistically significant differences for the use of space in 4 of the 8 zones in which the enclosures were divided. A more homogenous pattern in the use of space was only observed during the enrichment phase in the old female. The 3 brown bears followed different patterns concerning the enrichment program.

Study Program to Determine the Acceleration Environment Capability of the GG159C Gas- Bearing Spinmotor Final Report

NASA Technical Reports Server (NTRS)

Erickson, G. J.

1964-01-01

The goal of this contract was to determine the g environment under which the GC159C Gas-Bearing Spinmotor (GBSM) could reliably operate. This was fulfilled by building and testing of four GBSM's, a test fixture, and a "dummy" gyro. The test program was divided into two phases when a gas bearing improvement was required to withstand JPL shock requirement of 200 g. Phase I determined existing g capabilities and performance of the GC159C GBSM and gimbal-case structure. Phase II increased GBSM capability to meet required JPL g environments. Life tests were run on two GBSM's which were shocked at a high level to obtain bearing contact while rotating at their operating speed of 23,000 rpm. A third (nonoperating) GBSM was exposed to JPL maximum shock levels, and a fourth (nonoperating) GBSM was exposed to random vibration. Both nonoperating GBSM's were then subjected to life testing.

Advanced Software for Analysis of High-Speed Rolling-Element Bearings

NASA Technical Reports Server (NTRS)

Poplawski, J. V.; Rumbarger, J. H.; Peters, S. M.; Galatis, H.; Flower, R.

2003-01-01

COBRA-AHS is a package of advanced software for analysis of rigid or flexible shaft systems supported by rolling-element bearings operating at high speeds under complex mechanical and thermal loads. These loads can include centrifugal and thermal loads generated by motions of bearing components. COBRA-AHS offers several improvements over prior commercial bearing-analysis programs: It includes innovative probabilistic fatigue-life-estimating software that provides for computation of three-dimensional stress fields and incorporates stress-based (in contradistinction to prior load-based) mathematical models of fatigue life. It interacts automatically with the ANSYS finite-element code to generate finite-element models for estimating distributions of temperature and temperature-induced changes in dimensions in iterative thermal/dimensional analyses: thus, for example, it can be used to predict changes in clearances and thermal lockup. COBRA-AHS provides an improved graphical user interface that facilitates the iterative cycle of analysis and design by providing analysis results quickly in graphical form, enabling the user to control interactive runs without leaving the program environment, and facilitating transfer of plots and printed results for inclusion in design reports. Additional features include roller-edge stress prediction and influence of shaft and housing distortion on bearing performance.

Future for polar bears in a declining sea ice environment: What do we know?

USGS Publications Warehouse

Amstrup, Steven C.

2006-01-01

During an April 22, 2006, interview on the CBC radio program “The House,” Tim Flannery, author of the recent book “The Weathermakers,” stated, “Projections of the polar bear specialists are that by about 2030, around that date, the species will be extinct because of global warming induced changes in the Arctic sea ice.” That statement was followed on May 4th by quotations in the Toronto Globe and Mail from Dr. Mitch Taylor, a polar bear researcher in Nunavut, Canada, claiming, “polar bears have survived both warmer times and colder times than these,” that “nothing has melted the Arctic sea ice for 30 million years,” that “polar bears are remarkably adaptable,” and that “a warming climate might even benefit polar bears.”

Optimization of self-acting step thrust bearings for load capacity and stiffness.

NASA Technical Reports Server (NTRS)

Hamrock, B. J.

1972-01-01

Linearized analysis of a finite-width rectangular step thrust bearing. Dimensionless load capacity and stiffness are expressed in terms of a Fourier cosine series. The dimensionless load capacity and stiffness were found to be a function of the dimensionless bearing number, the pad length-to-width ratio, the film thickness ratio, the step location parameter, and the feed groove parameter. The equations obtained in the analysis were verified. The assumptions imposed were substantiated by comparing the results with an existing exact solution for the infinite width bearing. A digital computer program was developed which determines optimal bearing configuration for maximum load capacity or stiffness. Simple design curves are presented. Results are shown for both compressible and incompressible lubrication. Through a parameter transformation the results are directly usable in designing optimal step sector thrust bearings.

Application to graduate psychology programs by undergraduate students of color: the impact of a research training program.

PubMed

Hall, Gordon C Nagayama; Allard, Carolyn B

2009-07-01

The top 86 students were selected from a pool of approximately 400 applicants to a summer clinical psychology research training program for undergraduate students of color. Forty-three of the students were randomly assigned to 1 of 2 clinical psychology research training programs, and 43 were randomly assigned to a control condition without training. The multicultural version of the training program emphasized the cultural context of psychology in all areas of training, whereas cultural context was de-emphasized in the monocultural version of the program. Although the cultural content of the 2 training programs was effectively manipulated as indicated by a fidelity check by an outside expert, there were no significant differences between the effects of the 2 programs on the outcomes measured in this study. The primary differences in this study were between students who did versus those who did not participate in a training program. Sixty-five percent of the students who completed the multicultural training program applied to graduate schools in psychology, compared with 47% of those who completed the monocultural training program, and 31% of those in the control group. Participation in summer research training programs also increased self-perceptions of multicultural competence.

Emergency management training program: Guide to good practice

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-07-01

The Emergency Management Training Program Guide to Good Practice is a project of the Training Resources and Data Exchange (TRADE) Emergency Management Issues Special Interest Group (EMI SIG). EMI SIG members expressed interest in a resource to assist in development of a comprehensive emergency management training program. This publication provides guidelines, methods, and materials for EMI SIG members to use, assisting in complete and effective emergency management programs. The purposes of the Emergency Management Training Program Guide to Good Practice are: Provide guidance in the development and management of Emergency Management (EM) training programs; Assist EM trainers to incorporate componentsmore » of the DOE Emergency Management System philosophy of planning, preparedness, readiness assurance, and response into EM training programs; Help EM training managers meet EM training requirements and conditions established by current regulations and policies; Supplement other TRADE EMI SIG documents and complement individual facility training documents. This program is designed for emergency management personnel who are responsible for providing or overseeing EM training but who do not necessarily possess expertise in developing training. It provides good practices from the manager's point of view on how to produce, administer, and document facility EM training programs in the spirit of the DOE EM system philosophy. Basic guidance is also included for personnel who design, develop, deliver, and/or evaluate EM training programs or parts. This guidance includes key points of EM training programs and identifies other documents that contain useful and/or more detailed training information.« less

Emergency management training program: Guide to good practice

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-07-01

The Emergency Management Training Program Guide to Good Practice is a project of the Training Resources and Data Exchange (TRADE) Emergency Management Issues Special Interest Group (EMI SIG). EMI SIG members expressed interest in a resource to assist in development of a comprehensive emergency management training program. This publication provides guidelines, methods, and materials for EMI SIG members to use, assisting in complete and effective emergency management programs. The purposes of the Emergency Management Training Program Guide to Good Practice are: Provide guidance in the development and management of Emergency Management (EM) training programs; Assist EM trainers to incorporate componentsmore » of the DOE Emergency Management System philosophy of planning, preparedness, readiness assurance, and response into EM training programs; Help EM training managers meet EM training requirements and conditions established by current regulations and policies; Supplement other TRADE EMI SIG documents and complement individual facility training documents. This program is designed for emergency management personnel who are responsible for providing or overseeing EM training but who do not necessarily possess expertise in developing training. It provides good practices from the manager`s point of view on how to produce, administer, and document facility EM training programs in the spirit of the DOE EM system philosophy. Basic guidance is also included for personnel who design, develop, deliver, and/or evaluate EM training programs or parts. This guidance includes key points of EM training programs and identifies other documents that contain useful and/or more detailed training information.« less

Development of design and analysis methodology for composite bolted joints

NASA Astrophysics Data System (ADS)

Grant, Peter; Sawicki, Adam

1991-05-01

This paper summarizes work performed to develop composite joint design methodology for use on rotorcraft primary structure, determine joint characteristics which affect joint bearing and bypass strength, and develop analytical methods for predicting the effects of such characteristics in structural joints. Experimental results have shown that bearing-bypass interaction allowables cannot be defined using a single continuous function due to variance of failure modes for different bearing-bypass ratios. Hole wear effects can be significant at moderate stress levels and should be considered in the development of bearing allowables. A computer program has been developed and has successfully predicted bearing-bypass interaction effects for the (0/+/-45/90) family of laminates using filled hole and unnotched test data.

40 CFR 82.110 - Form of label bearing warning statement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 17 2010-07-01 2010-07-01 false Form of label bearing warning statement. 82.110 Section 82.110 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE The Labeling of Products Using Ozone-Depleting...

40 CFR 82.112 - Removal of label bearing warning statement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 17 2010-07-01 2010-07-01 false Removal of label bearing warning statement. 82.112 Section 82.112 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE The Labeling of Products Using Ozone-Depleting...

Design criteria monograph for high-load high-speed rolling-contact bearings

NASA Technical Reports Server (NTRS)

1972-01-01

Monograph was published which summarizes and systematically orders large body of successful techniques and practices developed for design of liquid rocket engine turbopump bearings. Document was written to organize and present significant experience and knowledge accumulated by NASA in development and operational programs.

Grizzly bear density in Glacier National Park, Montana

USGS Publications Warehouse

Kendall, K.C.; Stetz, J.B.; Roon, David A.; Waits, L.P.; Boulanger, J.B.; Paetkau, David

2008-01-01

We present the first rigorous estimate of grizzly bear (Ursus arctos) population density and distribution in and around Glacier National Park (GNP), Montana, USA. We used genetic analysis to identify individual bears from hair samples collected via 2 concurrent sampling methods: 1) systematically distributed, baited, barbed-wire hair traps and 2) unbaited bear rub trees found along trails. We used Huggins closed mixture models in Program MARK to estimate total population size and developed a method to account for heterogeneity caused by unequal access to rub trees. We corrected our estimate for lack of geographic closure using a new method that utilizes information from radiocollared bears and the distribution of bears captured with DNA sampling. Adjusted for closure, the average number of grizzly bears in our study area was 240.7 (95% CI = 202–303) in 1998 and 240.6 (95% CI = 205–304) in 2000. Average grizzly bear density was 30 bears/1,000 km2, with 2.4 times more bears detected per hair trap inside than outside GNP. We provide baseline information important for managing one of the few remaining populations of grizzlies in the contiguous United States.

Bearing optimization for SSME HPOTP application

NASA Technical Reports Server (NTRS)

Armstrong, Elizabeth S.; Coe, Harold H.

1988-01-01

The space shuttle main engine (SSME) high-pressure oxygen turbopumps (HPOTP) have not experienced the service life required of them. To improve the life of the existing turbopump bearings, modifications to the bearings that could be retrofitted into the present bearing cavity are being investigated. Several bearing parameters were optimized using the computer program SHABERTH, which performs a thermomechanical simulation of a load support system. The computer analysis showed that improved bearing performance is feasible if low friction coefficients can be attained. Bearing geometries were optimized considering heat generation, equilibrium temperatures, and relative life. Two sets of curvatures were selected from the optimization: an inner-raceway curvature of 0.54, an outer-raceway curvature of 0.52, and an inner-raceway curvature of 0.55, an outer-raceway curvature of 0.53. A contact angle of 16 deg was also selected. Thermal gradients through the bearings were found to be lower with liquid lubrication than with solid film lubrication. As the coolant flowrate through the bearing increased, the ball temperature decreased but at a continuously decreasing rate. The optimum flowrate was approximately 4 kg/s. The analytical modeling used to determine these feasible modifications to improve bearing performance is described.

Thermohydrodynamic Analysis of Cryogenic Liquid Turbulent Flow Fluid Film Bearings

NASA Technical Reports Server (NTRS)

San Andres, Luis

1996-01-01

This report describes a thermohydrodynamic analysis and computer programs for the prediction of the static and dynamic force response of fluid film bearings for cryogenic applications. The research performed addressed effectively the most important theoretical and practical issues related to the operation and performance of cryogenic fluid film bearings. Five computer codes have been licensed by the Texas A&M University to NASA centers and contractors and a total of 14 technical papers have been published.

High speed cylindrical roller bearing analysis. SKF computer program CYBEAN. Volume 2: User's manual

NASA Technical Reports Server (NTRS)

Dyba, G. J.; Kleckner, R. J.

1981-01-01

CYBEAN (CYlindrical BEaring ANalysis) was created to detail radially loaded, aligned and misaligned cylindrical roller bearing performance under a variety of operating conditions. Emphasis was placed on detailing the effects of high speed, preload and system thermal coupling. Roller tilt, skew, radial, circumferential and axial displacement as well as flange contact were considered. Variable housing and flexible out-of-round outer ring geometries, and both steady state and time transient temperature calculations were enabled. The complete range of elastohydrodynamic contact considerations, employing full and partial film conditions were treated in the computation of raceway and flange contacts. The practical and correct implementation of CYBEAN is discussed. The capability to execute the program at four different levels of complexity was included. In addition, the program was updated to properly direct roller-to-raceway contact load vectors automatically in those cases where roller or ring profiles have small radii of curvature. Input and output architectures containing guidelines for use and two sample executions are detailed.

Femoral neck stress fracture in a female athlete: a case report

PubMed Central

Avrahami, Daniel; Pajaczkowski, Jason A.

2012-01-01

Objective The purpose of this case report is to describe chiropractic rehabilitation of a master's-level athlete with proximal femoral stress fracture and provide a brief discussion of stress fracture pathology. Clinical Features A 41-year-old female master's-level endurance athlete presented with chronic groin pain later diagnosed and confirmed by magnetic resonance imaging as a stress fracture of the femoral neck. After diagnosis, the patient was referred to a doctor of chiropractic at week 1 of the non–weight-bearing physical rehabilitation process. At that time, the patient presented with sharp and constant groin pain rated 6/10 on a numeric rating scale. Intervention and Outcome This patient avoided weight-bearing activity for 8 weeks while cross-training and was able to return to her sport after this period. The patient was progressed through a series of non–weight-bearing strengthening exercises for the lower extremity. Myofascial release therapy was performed on the gluteal, hip flexor, and groin muscle groups to improve range of motion. Motion palpation testing the lumbar and sacroiliac joints was performed during each session, and manipulative therapy was performed when necessary. The patient was seen once a week for 8 weeks. Reevaluation was performed at week 8; at that time, the patient reported no groin pain (0/10). The patient was discharged from care and referred back to the supervising physician for clearance to return to sporting activities. One month after discharge, she reported that she was pain free and had fully returned to sport activities. Conclusion This case report demonstrates the importance of a through clinical history, physical examination, and magnetic resonance imaging in the accurate diagnosis of a patient with chronic groin pain and that chiropractic care can contribute to rehabilitation programs for these injuries. PMID:23843760

A statewide nurse training program for a hospital based infant abusive head trauma prevention program.

PubMed

Nocera, Maryalice; Shanahan, Meghan; Murphy, Robert A; Sullivan, Kelly M; Barr, Marilyn; Price, Julie; Zolotor, Adam

2016-01-01

Successful implementation of universal patient education programs requires training large numbers of nursing staff in new content and procedures and maintaining fidelity to program standards. In preparation for statewide adoption of a hospital based universal education program, nursing staff at 85 hospitals and 1 birthing center in North Carolina received standardized training. This article describes the training program and reports findings from the process, outcome and impact evaluations of this training. Evaluation strategies were designed to query nurse satisfaction with training and course content; determine if training conveyed new information, and assess if nurses applied lessons from the training sessions to deliver the program as designed. Trainings were conducted during April 2008-February 2010. Evaluations were received from 4358 attendees. Information was obtained about training type, participants' perceptions of newness and usefulness of information and how the program compared to other education materials. Program fidelity data were collected using telephone surveys about compliance to delivery of teaching points and teaching behaviors. Results demonstrate high levels of satisfaction and perceptions of program utility as well as adherence to program model. These findings support the feasibility of implementing a universal patient education programs with strong uptake utilizing large scale systematic training programs. Copyright © 2015 Elsevier Ltd. All rights reserved.

Ex-miners in the classrooms, the dedication to safety is total

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carroll, W.

1979-04-01

Since October 1976, the National Mine Health and Safety Academy has trained nearly 16,000 persons from Federal and state governments, industry, labor and educational institutions in a variety of subjects bearing on the safety and health of coal and metal and nonmetal miners. The Academy's modern hilltop complex, located in one of the country's most important bituminous coal producing areas, is made up of six buildings with 278,000 square feet of floor space containing about $2.5 million in equipment and furnishings. Classrooms and laboratories can accommodate 600 students, and there is dormitory space for 340 persons. Other facilities include amore » learning resource center, a mine machinery laboratory equipped with a full power panel for operating heavy mining equipment and furnishings. A Department of the Interior agency, the Academy has a civil service staff of 84 and a maintenance staff of 70. From the start, the primary mission of the Academy has been to train Federal coal and metal and nonmetal mine safety and health inspectors. The goal is to support efforts of MSHA and others to reduce mining fatalities, injuries and illnesses by making Academy programs available to the widest possible audience.« less

Superconductor bearings, flywheels and transportation

NASA Astrophysics Data System (ADS)

Werfel, F. N.; Floegel-Delor, U.; Rothfeld, R.; Riedel, T.; Goebel, B.; Wippich, D.; Schirrmeister, P.

2012-01-01

This paper describes the present status of high temperature superconductors (HTS) and of bulk superconducting magnet devices, their use in bearings, in flywheel energy storage systems (FESS) and linear transport magnetic levitation (Maglev) systems. We report and review the concepts of multi-seeded REBCO bulk superconductor fabrication. The multi-grain bulks increase the averaged trapped magnetic flux density up to 40% compared to single-grain assembly in large-scale applications. HTS magnetic bearings with permanent magnet (PM) excitation were studied and scaled up to maximum forces of 10 kN axially and 4.5 kN radially. We examine the technology of the high-gradient magnetic bearing concept and verify it experimentally. A large HTS bearing is tested for stabilizing a 600 kg rotor of a 5 kWh/250 kW flywheel system. The flywheel rotor tests show the requirement for additional damping. Our compact flywheel system is compared with similar HTS-FESS projects. A small-scale compact YBCO bearing with in situ Stirling cryocooler is constructed and investigated for mobile applications. Next we show a successfully developed modular linear Maglev system for magnetic train operation. Each module levitates 0.25t at 10 mm distance during one-day operation without refilling LN2. More than 30 vacuum cryostats containing multi-seeded YBCO blocks are fabricated and are tested now in Germany, China and Brazil.

Participation in Training for Depression Care Quality Improvement: A Randomized Trial of Community Engagement or Technical Support.

PubMed

Chung, Bowen; Ngo, Victoria K; Ong, Michael K; Pulido, Esmeralda; Jones, Felica; Gilmore, James; Stoker-Mtume, Norma; Johnson, Megan; Tang, Lingqi; Wells, Kenneth Brooks; Sherbourne, Cathy; Miranda, Jeanne

2015-08-01

Community engagement and planning (CEP) could improve dissemination of depression care quality improvement in underresourced communities, but whether its effects on provider training participation differ from those of standard technical assistance, or resources for services (RS), is unknown. This study compared program- and staff-level participation in depression care quality improvement training among programs enrolled in CEP, which trained networks of health care and social-community agencies jointly, and RS, which provided technical support to individual programs. Matched programs from health care and social-community service sectors in two communities were randomly assigned to RS or CEP. Data were from 1,622 eligible staff members from 95 enrolled programs. Primary outcomes were any staff trained (for programs) and total hours of training (for staff). Secondary staff-level outcomes were hours of training in specific depression collaborative care components. CEP programs were more likely than RS programs to participate in any training (p=.006). Within health care sectors, CEP programs were more likely than RS programs to participate in training (p=.016), but within social-community sectors, there was no difference in training by intervention. Among staff who participated in training, mean training hours were greater among CEP programs versus RS programs for any type of training (p<.001) and for training related to each component of depression care (p<.001) except medication management. CEP may be an effective strategy to promote staff participation in depression care improvement efforts in underresourced communities.

14 CFR 121.407 - Training program: Approval of airplane simulators and other training devices.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Training program: Approval of airplane... Program § 121.407 Training program: Approval of airplane simulators and other training devices. (a) Each airplane simulator and other training device that is used in a training course permitted under § 121.409...

14 CFR 121.407 - Training program: Approval of airplane simulators and other training devices.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Training program: Approval of airplane... Program § 121.407 Training program: Approval of airplane simulators and other training devices. (a) Each airplane simulator and other training device that is used in a training course permitted under § 121.409...

14 CFR 121.407 - Training program: Approval of airplane simulators and other training devices.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Training program: Approval of airplane... Program § 121.407 Training program: Approval of airplane simulators and other training devices. (a) Each airplane simulator and other training device that is used in a training course permitted under § 121.409...

14 CFR 121.407 - Training program: Approval of airplane simulators and other training devices.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Training program: Approval of airplane... Program § 121.407 Training program: Approval of airplane simulators and other training devices. (a) Each airplane simulator and other training device that is used in a training course permitted under § 121.409...

78 FR 47419 - Requirements for the OSHA Training Institute Education Centers Program and the OSHA Outreach...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-05

...] Requirements for the OSHA Training Institute Education Centers Program and the OSHA Outreach Training Program... approval of the information collection requirements contained in the OSHA Training Institute Education... Educational Programs, or Kimberly Mason, OSHA Training Institute Education Centers Program at the address...

34 CFR 642.10 - Activities the Secretary assists under the Training Program.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Secretary assists under the Training Program. (a) A Training Program project trains the staff and leadership... 34 Education 3 2010-07-01 2010-07-01 false Activities the Secretary assists under the Training... (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION TRAINING PROGRAM FOR FEDERAL TRIO...

25 CFR 26.32 - What constitutes a complete Job Training Program application?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false What constitutes a complete Job Training Program... JOB PLACEMENT AND TRAINING PROGRAM Training Services § 26.32 What constitutes a complete Job Training Program application? A request for training includes: (a) Intake and application data; (b) Feasible...

Programs for the Principal: A Survey

ERIC Educational Resources Information Center

Martin, Evelyn B.

1972-01-01

A modest survey to determine the nature of existing programs to prepare school principals bears out the author's thesis that these programs should be more responsive to the needs of principals who are enmeshed in today's societal crises. (Editor)

Artificial Neural Network Based Fault Diagnostics of Rolling Element Bearings Using Time-Domain Features

NASA Astrophysics Data System (ADS)

Samanta, B.; Al-Balushi, K. R.

2003-03-01

A procedure is presented for fault diagnosis of rolling element bearings through artificial neural network (ANN). The characteristic features of time-domain vibration signals of the rotating machinery with normal and defective bearings have been used as inputs to the ANN consisting of input, hidden and output layers. The features are obtained from direct processing of the signal segments using very simple preprocessing. The input layer consists of five nodes, one each for root mean square, variance, skewness, kurtosis and normalised sixth central moment of the time-domain vibration signals. The inputs are normalised in the range of 0.0 and 1.0 except for the skewness which is normalised between -1.0 and 1.0. The output layer consists of two binary nodes indicating the status of the machine—normal or defective bearings. Two hidden layers with different number of neurons have been used. The ANN is trained using backpropagation algorithm with a subset of the experimental data for known machine conditions. The ANN is tested using the remaining set of data. The effects of some preprocessing techniques like high-pass, band-pass filtration, envelope detection (demodulation) and wavelet transform of the vibration signals, prior to feature extraction, are also studied. The results show the effectiveness of the ANN in diagnosis of the machine condition. The proposed procedure requires only a few features extracted from the measured vibration data either directly or with simple preprocessing. The reduced number of inputs leads to faster training requiring far less iterations making the procedure suitable for on-line condition monitoring and diagnostics of machines.

Fertility decline and social service access: reconciling behavioral and medical models.

PubMed

Weinstein, J

1978-01-01

In this summary of fertility literature the author attempts to differentiate between the effects of behavioral and medical models of family planning programs on the fertility rate. This is done by determining the effects of access to social welfare services by assessment of: the function of children within the family life survey conducted in the Cameroons are also used. It was found that 7 interdependent elements of social service are involved: 1) general health care; 2) social security for sick and aged; 3) employment training and opportunities for adults; 4) literacy and education; 5) communication and transportation systems; 6) housing and infrastructure; 7) child care and welfare. The presence of these elements is shown to accompany low fertility while their absence is expressed in high rates of child bearing. These elements are major variables in both the nomological and public policy senses. 2 additional components are knowledge of and favorable attitudes towards effective means of fertility control plus effective mechanical, chemical, or natural means of limiting fertility. The concept of fertility norm and its impact on the fertility rate is explained as being the result of the collective force which social affiliations exert on people to reproduce in a certain way. The "stopping rule" is that which will fulfill the fertility norm. An example of this is a culture which continues child bearing until a son has been born and then controls reproduction after this has happened. Such factors must be considered for family planning programs to succeed in these cultures. Therefore fertility levels are found to be the product of prevailing norms and technical ability to achieve these norms. Improvement in levels of access to social services can bring about the lowering of these norms.

Characteristics of human - sloth bear (Melursus ursinus) encounters and the resulting human casualties in the Kanha-Pench corridor, Madhya Pradesh, India

PubMed Central

Bargali, Harendra; Gore, Kedar

2017-01-01

Sloth bears (Melursus ursinus) caused the highest number of human deaths between 2001 and 2015 and ranked second compared to other wild animals in causing human casualties in the Kanha-Pench corridor area. We studied the patterns of sloth bear attacks in the region to understand the reasons for conflict. We interviewed 166 victims of sloth bear attacks which occurred between 2004 and 2016 and found that most attacks occurred in forests (81%), with the greatest number of those (42%) occurring during the collection of Non-Timber Forest Produce (NTFP), 15% during the collection of fuelwood and 13% during grazing of livestock. The remainder took place at forest edges or in agricultural fields (19%), most occurring when person(s) were working in fields (7%), defecating (5%), or engaged in construction work (3%). Most victims were between the ages of 31 to 50 (57%) and most (54%) were members of the Gond tribe. The majority of attacks occurred in summer (40%) followed by monsoon (35%) and winter (25%). Forty-four percent of victims were rescued by people, while 43% of the time bears retreated by themselves. In 60% of attacks, a single bear was involved, whereas 25% involved adult females with dependent cubs and the remainder (15%) of the cases involved a pair of bears. We discuss the compensation program for attack victims as well as other governmental programs which can help reduce conflict. Finally, we recommend short-term mitigation measures for forest-dependent communities. PMID:28448565

Characteristics of human - sloth bear (Melursus ursinus) encounters and the resulting human casualties in the Kanha-Pench corridor, Madhya Pradesh, India.

PubMed

Dhamorikar, Aniruddha H; Mehta, Prakash; Bargali, Harendra; Gore, Kedar

2017-01-01

Sloth bears (Melursus ursinus) caused the highest number of human deaths between 2001 and 2015 and ranked second compared to other wild animals in causing human casualties in the Kanha-Pench corridor area. We studied the patterns of sloth bear attacks in the region to understand the reasons for conflict. We interviewed 166 victims of sloth bear attacks which occurred between 2004 and 2016 and found that most attacks occurred in forests (81%), with the greatest number of those (42%) occurring during the collection of Non-Timber Forest Produce (NTFP), 15% during the collection of fuelwood and 13% during grazing of livestock. The remainder took place at forest edges or in agricultural fields (19%), most occurring when person(s) were working in fields (7%), defecating (5%), or engaged in construction work (3%). Most victims were between the ages of 31 to 50 (57%) and most (54%) were members of the Gond tribe. The majority of attacks occurred in summer (40%) followed by monsoon (35%) and winter (25%). Forty-four percent of victims were rescued by people, while 43% of the time bears retreated by themselves. In 60% of attacks, a single bear was involved, whereas 25% involved adult females with dependent cubs and the remainder (15%) of the cases involved a pair of bears. We discuss the compensation program for attack victims as well as other governmental programs which can help reduce conflict. Finally, we recommend short-term mitigation measures for forest-dependent communities.

42 CFR 432.30 - Training programs: General requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... inservice training for newly appointed staff, and continuing training opportunities to improve the operation... 42 Public Health 4 2013-10-01 2013-10-01 false Training programs: General requirements. 432.30... SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS STATE PERSONNEL ADMINISTRATION Training Programs...

42 CFR 432.30 - Training programs: General requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... inservice training for newly appointed staff, and continuing training opportunities to improve the operation... 42 Public Health 4 2014-10-01 2014-10-01 false Training programs: General requirements. 432.30... SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS STATE PERSONNEL ADMINISTRATION Training Programs...

42 CFR 432.30 - Training programs: General requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... inservice training for newly appointed staff, and continuing training opportunities to improve the operation... 42 Public Health 4 2011-10-01 2011-10-01 false Training programs: General requirements. 432.30... SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS STATE PERSONNEL ADMINISTRATION Training Programs...

42 CFR 432.30 - Training programs: General requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... inservice training for newly appointed staff, and continuing training opportunities to improve the operation... 42 Public Health 4 2012-10-01 2012-10-01 false Training programs: General requirements. 432.30... SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS STATE PERSONNEL ADMINISTRATION Training Programs...

42 CFR 432.30 - Training programs: General requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... inservice training for newly appointed staff, and continuing training opportunities to improve the operation... 42 Public Health 4 2010-10-01 2010-10-01 false Training programs: General requirements. 432.30... SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS STATE PERSONNEL ADMINISTRATION Training Programs...

14 CFR 142.39 - Training program curriculum requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Training program curriculum requirements... TRANSPORTATION (CONTINUED) SCHOOLS AND OTHER CERTIFICATED AGENCIES TRAINING CENTERS Aircrew Curriculum and Syllabus Requirements § 142.39 Training program curriculum requirements. Each training program curriculum...

14 CFR 142.39 - Training program curriculum requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Training program curriculum requirements... TRANSPORTATION (CONTINUED) SCHOOLS AND OTHER CERTIFICATED AGENCIES TRAINING CENTERS Aircrew Curriculum and Syllabus Requirements § 142.39 Training program curriculum requirements. Each training program curriculum...

Toward a 3D dynamic model of a faulty duplex ball bearing

NASA Astrophysics Data System (ADS)

Kogan, Gideon; Klein, Renata; Kushnirsky, Alex; Bortman, Jacob

2015-03-01

Bearings are vital components for safe and proper operation of machinery. Increasing efficiency of bearing diagnostics usually requires training of health and usage monitoring systems via expensive and time-consuming ground calibration tests. The main goal of this research, therefore, is to improve bearing dynamics modeling tools in order to reduce the time and budget needed to implement the health and usage monitoring approach. The proposed three-dimensional ball bearing dynamic model is based on the classic dynamic and kinematic equations. Interactions between the bodies are simulated using non-linear springs combined with dampers described by Hertz-type contact relation. The force friction is simulated using the hyperbolic-tangent function. The model allows simulation of a wide range of mechanical faults. It is validated by comparison to known bearing behavior and to experimental results. The model results are verified by demonstrating numerical convergence. The model results for the two cases of single and duplex angular ball bearings with axial deformation in the outer ring are presented. The qualitative investigation provides insight into bearing dynamics, the sensitivity study generalizes the qualitative findings for similar cases, and the comparison to the test results validates model reliability. The article demonstrates the variety of the cases that the 3D bearing model can simulate and the findings to which it may lead. The research allowed the identification of new patterns generated by single and duplex bearings with axially deformed outer race. It also enlightened the difference between single and duplex bearing manifestation. In the current research the dynamic model enabled better understanding of the physical behavior of the faulted bearings. Therefore, it is expected that the modeling approach has the potential to simplify and improve the development process of diagnostic algorithms. • A deformed outer race of a single axially loaded bearing is simulated. • The model results are subjected to a sensitivity study. • Duplex bearing with deformed outer race is simulated as well as tested. • The simulation results are in a good agreement with the experimental results.

25 CFR 26.4 - Who administers the Job Placement and Training Program?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Who administers the Job Placement and Training Program... PLACEMENT AND TRAINING PROGRAM General Applicability § 26.4 Who administers the Job Placement and Training Program? The Job Placement and Training Program is administered by the Bureau of Indian Affairs or a...

Acoustic detection of roller bearing defects. Phase II, Field test.

DOT National Transportation Integrated Search

2000-08-01

The Transportation Technology Center, Inc. (TTCI), a subsidiary of the Association of American Railroads (AAR) Research and Test Department, conducted a series of simulated revenue service tests with a train of eight cars containing wheel sets with s...

An air bearing system for small high speed gas turbines

NASA Astrophysics Data System (ADS)

Turner, A. B.; Davies, S. J.; Nimir, Y. L.

1994-03-01

This paper describes the second phase of an experimental program concerning the application of air bearings to small turbomachinery test rigs and small gas turbines. The first phase examined externally pressurized (EP) journal bearings, with a novel EP thrust bearing, for application to 'warm air' test rigs, and was entirely successful at rotational speeds in excess of 100,000 rpm. This second phase examined several designs of tilting pad-spiring journal bearings, one with a novel form of externally pressurized pad, but all using the original EP thrust bearing. The designs tested are described, including some oscillogram traces, for tests up to a maximum of 70,000 rpm; the most successful using a carbon pad-titanium beam spring arrangement. The thrust bearing which gave trouble-free operation throughout, is also described. The results of an original experiment to measure the 'runway speed' of a radial inflow turbine are also presented, which show that overspeeds of 58 percent above the design speed can result from free-power turbine coupling failure.

Application of powder metallurgy techniques to produce improved bearing elements for liquid rocket engines

NASA Technical Reports Server (NTRS)

Moracz, D. J.; Shipley, R. J.; Moxson, V. S.; Killman, R. J.; Munson, H. E.

1992-01-01

The objective was to apply powder metallurgy techniques for the production of improved bearing elements, specifically balls and races, for advanced cryogenic turbopump bearings. The materials and fabrication techniques evaluated were judged on the basis of their ability to improve fatigue life, wear resistance, and corrosion resistance of Space Shuttle Main Engine (SSME) propellant bearings over the currently used 440C. An extensive list of candidate bearing alloys in five different categories was considered: tool/die steels, through hardened stainless steels, cobalt-base alloys, and gear steels. Testing of alloys for final consideration included hardness, rolling contact fatigue, cross cylinder wear, elevated temperature wear, room and cryogenic fracture toughness, stress corrosion cracking, and five-ball (rolling-sliding element) testing. Results of the program indicated two alloys that showed promise for improved bearing elements. These alloys were MRC-2001 and X-405. 57mm bearings were fabricated from the MRC-2001 alloy for further actual hardware rig testing by NASA-MSFC.

Cockpit Resource Management (CRM) training in the 1550th combat crew training wing

NASA Technical Reports Server (NTRS)

Fiedler, Michael T.

1987-01-01

The training program the 1550th Combat Crew Training Wing at Kirtland Air Force Base, New Mexico, implemented in September 1985 is discussed. The program is called Aircrew Coordination Training (ACT), and it is designed specifically to help aircrew members work more effectively as a team in their respective aircraft and hopefully to reduce human factors-related accidents. The scope of the 1550th CCTW's training responsibilities is described, the structure of the program, along with a brief look at the content of the academic part of the course. Then the Mission-Oriented Simulator Training (MOST) program is discussed; a program similar to the Line Oriented Flight Training (LOFT) programs. Finally, the future plans for the Aircrew Coordination Training Program at the 1550th is discussed.

Play Therapy Training among School Psychology, Social Work, and School Counseling Graduate Training Programs

ERIC Educational Resources Information Center

Pascarella, Christina Bechle

2012-01-01

This study examined play therapy training across the nation among school psychology, social work, and school counseling graduate training programs. It also compared current training to previous training among school psychology and school counseling programs. A random sample of trainers was selected from lists of graduate programs provided by…

Radial Clearance Found To Play a Key Role in the Performance of Compliant Foil Air Bearings

NASA Technical Reports Server (NTRS)

Radil, Kevin C.

2003-01-01

Compliant foil air bearings are at the forefront of the Oil-Free turbomachinery revolution, which supports gas turbine engines with hydrodynamic bearings that use air instead of oil as the working fluid. These types of bearings have been around for almost 50 years and have found a home in several commercial applications, such as in air cycle machines, turbocompressors, and microturbines, but are now being aggressively pursued for use in small and midrange aircraft gas turbine engines. Benefits include higher operating speeds and temperatures, lower maintenance costs, and greater reliability. The Oil-Free Turbomachinery team at the NASA Glenn Research Center is working to foster the transition of Oil-Free technology into gas turbine engines by performing in-house experiments on foil air bearings in order to gain a greater insight into their complex operating principles. A research program recently undertaken at Glenn focused on the concept of radial clearance and its influence on bearing performance. The tests were conducted on foil bearings with different radial clearances. As defined for a foil bearing, radial clearance is a measure of the small amount of shaft radial motion that is present from play that exists in the elastic support structure, such as between the top and bump foils and the bump foils and bearing shell (see the drawing). With an insufficient amount of radial clearance, the bearing imparts a high preload on the shaft, which when excessive, can reduce the loadcarrying capability of the bearing. On the other hand, systems using foil bearings with excessive radial clearance may experience rotordynamic instabilities because of low bearing preload. Therefore, without a more thorough understanding of radial clearance, it is difficult to accurately predict the performance of a given bearing design. The test program demonstrated that there is a direct correlation between radial clearance and the performance of foil air bearings. As shown in the graph, an optimum radial clearance exists that will maximize the amount of load that the bearing is capable of supporting. With respect to this optimum, two different performance regimes were observed that are a function of the amount of radial clearance. Tests showed that bearings with radial clearances below the optimum in regime I were susceptible to sudden seizure, a failure mode indicative of thermal runaway caused by high preload. The high preload is in response to an insufficient amount of radial clearance available to accommodate the thermal growth of the bearing and shaft. However, radial clearances greater than the optimum in regime II resulted in low bearing preloads that did not cause any heat-related problems, and the failure mode was due to fluid-film breakdown. In fact, bearings operating with radial clearances twice as much as the optimum suffered a decrease in the maximum load capacity of only about 20 percent. Therefore, special attention has to be given to the range of operating conditions expected in the bearing/shaft system since changes in temperature, centrifugal, and hydrodynamic effects can all affect radial clearance. This enhanced understanding of foil air bearing behavior will greatly aid our efforts to transition Oil-Free technology to future aircraft engines.

Alternative approaches to ambulatory training: internal medicine residents' and program directors' perspectives.

PubMed

Thomas, Kris G; West, Colin P; Popkave, Carol; Bellini, Lisa M; Weinberger, Steven E; Kolars, Joseph C; Kogan, Jennifer R

2009-08-01

Internal medicine ambulatory training redesign, including recommendations to increase ambulatory training, is a focus of national discussion. Residents' and program directors' perceptions about ambulatory training models are unknown. To describe internal medicine residents' and program directors' perceptions regarding ambulatory training duration, alternative ambulatory training models, and factors important for ambulatory education. National cohort study. Internal medicine residents (N = 14,941) and program directors (N = 222) who completed the 2007 Internal Medicine In-Training Examination (IM-ITE) Residents Questionnaire or Program Directors Survey, representing 389 US residency programs. A total of 58.4% of program directors and 43.7% of residents preferred one-third or more training time in outpatient settings. Resident preferences for one-third or more outpatient training increased with higher levels of training (48.3% PGY3), female sex (52.7%), primary care program enrollment (64.8%), and anticipated outpatient-focused career, such as geriatrics. Most program directors (77.3%) and residents (58.4%) preferred training models containing weekly clinic. Although residents and program directors reported problems with competing inpatient-outpatient responsibilities (74.9% and 88.1%, respectively) and felt that absence of conflict with inpatient responsibilities is important for good outpatient training (69.4% and 74.2%, respectively), only 41.6% of residents and 22.7% of program directors supported models eliminating ambulatory sessions during inpatient rotations. Residents' and program directors' preferences for outpatient training differ from recommendations for increased ambulatory training. Discordance was observed between reported problems with conflicting inpatient-outpatient responsibilities and preferences for models maintaining longitudinal clinic during inpatient rotations. Further study regarding benefits and barriers of ambulatory redesign is needed.

A Lack of Continuity in Education, Training, and Practice Violates the "Do No Harm" Principle.

PubMed

Englander, Robert; Carraccio, Carol

2018-03-01

The paradigm shift to competency-based medical education (CBME) is under way, but incomplete implementation is blunting the potential impact on learning and patient outcomes. The fundamental principles of CBME call for standardizing outcomes addressing population health needs, then allowing time-variable progression to achieving them. Operationalizing CBME principles requires continuity within and across phases of the education, training, and practice continuum. However, the piecemeal origin of the phases of the "continuum" has resulted in a sequence of undergraduate to graduate medical education to practice that may be continuous temporally but bears none of the integration of a true continuum.With these timed interruptions during phase transitions, learning is not reinforced because of a failure to integrate experiences. Brief block rotations for learners and ever-shorter supervisory assignments for faculty preclude the development of relationships. Without these relationships, feedback falls on deaf ears. Block rotations also disrupt learners' relationships with patients. The harms resulting from such a system include decreases in patient satisfaction with their care and learner satisfaction with their work. Learners in this block system also demonstrate an erosion of empathy compared with those in innovative longitudinal training models. In addition, higher patient mortality during intern transitions has been demonstrated.The current medical education system is violating the first principle of medicine: "Do no harm." Full implementation of competency-based, time-variable education and training, with fixed outcomes aligned with population health needs, continuity in learning and relationships, and support from a developmental program of assessment, holds great potential to stop this harm.

An Overview of Magnetic Bearing Technology for Gas Turbine Engines

NASA Technical Reports Server (NTRS)

Clark, Daniel J.; Jansen, Mark J.; Montague, Gerald T.

2004-01-01

The idea of the magnetic bearing and its use in exotic applications has been conceptualized for many years, over a century, in fact. Patented, passive systems using permanent magnets date back over 150 years. More recently, scientists of the 1930s began investigating active systems using electromagnets for high-speed ultracentrifuges. However, passive magnetic bearings are physically unstable and active systems only provide proper stiffness and damping through sophisticated controllers and algorithms. This is precisely why, until the last decade, magnetic bearings did not become a practical alternative to rolling element bearings. Today, magnetic bearing technology has become viable because of advances in micro-processing controllers that allow for confident and robust active control. Further advances in the following areas: rotor and stator materials and designs which maximize flux, minimize energy losses, and minimize stress limitations; wire materials and coatings for high temperature operation; high-speed micro processing for advanced controller designs and extremely robust capabilities; back-up bearing technology for providing a viable touchdown surface; and precision sensor technology; have put magnetic bearings on the forefront of advanced, lubrication free support systems. This paper will discuss a specific joint program for the advancement of gas turbine engines and how it implies the vitality of magnetic bearings, a brief comparison between magnetic bearings and other bearing technologies in both their advantages and limitations, and an examination of foreseeable solutions to historically perceived limitations to magnetic bearing.

Effect of Bearing Housings on Centrifugal Pump Rotor Dynamics

NASA Astrophysics Data System (ADS)

Yashchenko, A. S.; Rudenko, A. A.; Simonovskiy, V. I.; Kozlov, O. M.

2017-08-01

The article deals with the effect of a bearing housing on rotor dynamics of a barrel casing centrifugal boiler feed pump rotor. The calculation of the rotor model including the bearing housing has been performed by the method of initial parameters. The calculation of a rotor solid model including the bearing housing has been performed by the finite element method. Results of both calculations highlight the need to add bearing housings into dynamic analyses of the pump rotor. The calculation performed by modern software packages is more a time-taking process, at the same time it is a preferred one due to a graphic editor that is employed for creating a numerical model. When it is necessary to view many variants of design parameters, programs for beam modeling should be used.

Analysis of a two row hydrostatic journal bearing with variable properties, inertia effects and surface roughness

NASA Technical Reports Server (NTRS)

Braun, M. J.; Adams, M. L.; Mullen, R. L.

1985-01-01

A computer algorithm for simulation of hydrostatic journal bearing pressure-flow behavior has been generated. The effects taken into account are inertia, cavitation, variable properties (isothermal bearing) and roughness. The program has been specifically tailored for simulation of the hybrid bearing of the cryogenic turbopumps of the main shuttle engine. Due to the high pressure (515 psia) of the supply line no cavitation has been found. The influence of the roughness effects have been found to become important only when the surface-roughness order of magnitude is comparable with that of the bearing clearance itself. Pocket edge inertia and variable properties have been found to have quite an important influence upon the pocket pressure, field pressure distribution and lubricant mass flow.

STS-134 crew during EVA TPS Overview training in the TPS/PABF

NASA Image and Video Library

2009-12-15

JSC2009-E-284891 (15 Dec. 2009) --- STS-134 crew members participate in an EVA Thermal Protection System (TPS) overview training session in the TPS/ Precision Air Bearing Facility in the Space Vehicle Mock-up Facility at NASA?s Johnson Space Center. Pictured from the right are NASA astronauts Andrew Feustel, Greg Chamitoff, Michael Fincke, all mission specialists; along with NASA astronaut Gregory H. Johnson, pilot; and European Space Agency astronaut Roberto Vittori, mission specialist.

Reduction in Tribological Energy Losses in the Transportation and Electric Utilities Sectors

DTIC Science & Technology

1985-09-01

detailed a flow tree as possible. A major difficulty here lies in the fact that such detailed data are not always available or known. Another is that...Followers 14% Spring Load Reduction Same + Rolling Element Fulcrum Bearing Camshaft 0 FIGURE 4.27. Type IV 500 1000 1500 2000 2500 3000... Camshaft rpm Valve Train Friction Reduction with Various Improvements reduced the valve train torque 82% at 1500 rpm and the projected vehicle eco

5 CFR 410.304 - Funding training programs.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 1 2011-01-01 2011-01-01 false Funding training programs. 410.304 Section 410.304 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS TRAINING Establishing and Implementing Training Programs § 410.304 Funding training programs. Section 4112 of title 5...

Challenges in Measuring Benefit of Clinical Research Training Programs--the ASH Clinical Research Training Institute Example.

PubMed

Sung, Lillian; Crowther, Mark; Byrd, John; Gitlin, Scott D; Basso, Joe; Burns, Linda

2015-12-01

The American Society of Hematology developed the Clinical Research Training Institute (CRTI) to address the lack of training in patient-oriented research among hematologists. As the program continues, we need to consider metrics for measuring the benefits of such a training program. This article addresses the benefits of clinical research training programs. The fundamental and key components are education and mentorship. However, there are several other benefits including promotion of collaboration, job and advancement opportunities, and promotion of work-life balance. The benefits of clinical research training programs need to be measured so that funders and society can judge if they are worth the investment in time and resources. Identification of elements that are important to program benefit is essential to measuring the benefit of the program as well as program planning. Future work should focus on the constructs which contribute to benefits of clinical research training programs such as CRTI.

Black bear depredation on agricultural commodities in Massachusetts

USGS Publications Warehouse

Jonker, S.A.; Parkhurst, J.A.; Field, R.; Fuller, T.K.

1998-01-01

We used response to a mail survey (n = 848) to evaluate the extent and severity of depredation by black bears (Ursus americanus) on agricultural commodities in Massachusetts and to assess producers' attitudes toward and tolerance of bear depredation. Damage abatement techniques were ranked for effectiveness by producers of corn, bees and honey, and livestock and dairy products. Results showed differences in perception of effects of bear depredation among commodity groups. Producers of corn and livestock and dairy products considered bear damage to be low to moderate in severity whereas beekeepers thought their losses were substantial or severe. Most estimates of economic loss were <$1,000 per year. Respondents considered bears to be an inconvenience, but thought they should remain a part of our natural heritage. There was no significant relationship between producers' experience with or economic dependence on their product and their attitude toward bears or their tolerance of bear damage. We conclude that there is need for effective education programs for agricultural producers, strengthened working relationships between producers and state fish and wildlife agencies, incorporation of producers' suggestions into management decisions, and investment in effective, economical, and long-term solutions to bear depredations for each affected commodity group.

Foil bearing performance in liquid nitrogen and liquid oxygen

NASA Technical Reports Server (NTRS)

Genge, Gary G.; Saville, Marshall; Gu, Alston

1993-01-01

Space transfer vehicles and other power and propulsion systems require long-life turbopumps. Rolling-element bearings used in current turbopumps do not have sufficient life for these applications. Process fluid foil bearings have established long life, with exceptional reliability, over a wide range of temperatures and fluids in many high-speed turbomachinery applications. However, actual data on bearing performance in cryogenic fluids has been minimal. The National Aeronautics and Space Administration (NASA) and AlliedSignal Aerospace Systems and Equipment (ASE) have attempted to characterize the leaf-type compliant foil bearing in oxygen and nitrogen. The work performed under a joint internal research and development program between Marshall Space Flight Center (MSFC) and ASE demonstrated that the foil bearing has load capacities of at least 266 psi in liquid oxygen and 352 psi in liquid nitrogen. In addition, the bearing demonstrated a direct damping coefficient of 40 to 50 lb-sec/in. with a damping ratio of .7 to 1.4 in. liquid nitrogen using a bearing sized for upper-stage turbopumps. With the results from this testing and the years of successful use in air cycle machines and other applications, leaf-type compliant foil bearings are ready for testing in liquid oxygen turbopumps.

The new and improved learning community at Johns Hopkins University School of Medicine resembles that at Hogwarts School of Witchcraft and Wizardry.

PubMed

Stewart, Rosalyn W; Barker, Allison R; Shochet, Robert B; Wright, Scott M

2007-05-01

In July 2005, a learning community was created at Johns Hopkins University School of Medicine (JHUSOM) to foster camaraderie, networking, advising, mentoring, professionalism, clinical skills, and scholarship--The Colleges. The cultural and structural changes that emerged with the creation of this program have resulted in JHUSOM bearing a resemblance to J. K. Rowling's fictional Hogwarts School of Witchcraft and Wizardry. This manuscript will describe the similarities between these two revered schools, and highlight the innovations and improvements made to JHUSOM's learning environment. The intense, stressful, and lengthy professional training required to achieve competency in the practice of medicine and in the practice of witchcraft (albeit fictional) have meaningful parallels. The supportive learning environment at these two schools should afford the next generation of graduates to have an even more enriching experience than those who have come before them.

Core Training in Low Back Disorders: Role of the Pilates Method.

PubMed

Joyce, Andrew A; Kotler, Dana H

The Pilates method is a system of exercises developed by Joseph Pilates, which emphasizes recruitment and strengthening of the core muscles, flexibility, and breathing, to promote stability and control of movement. Its focus bears similarity to current evidence-based exercise programs for low back disorders. Spinal stability is a function of three interdependent systems, osseoligamentous, muscular, and neural control; exercise addresses both the muscular and neural function. The "core" typically refers to the muscular control required to maintain functional stability. Prior research has highlighted the importance of muscular strength and recruitment, with debate over the importance of individual muscles in the wider context of core control. Though developed long before the current evidence, the Pilates method is relevant in this setting and clearly relates to current evidence-based exercise interventions. Current literature supports the Pilates method as a treatment for low back disorders, but its benefit when compared with other exercise is less clear.

14 CFR 121.407 - Training program: Approval of airplane simulators and other training devices.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Training program: Approval of airplane... Program § 121.407 Training program: Approval of airplane simulators and other training devices. Link to an amendment published at 78 FR 67836, Nov. 12, 2013. (a) Each airplane simulator and other training device...

Abortion training in Canadian obstetrics and gynecology residency programs.

PubMed

Liauw, J; Dineley, B; Gerster, K; Hill, N; Costescu, D

2016-11-01

To evaluate the current state of abortion training in Canadian Obstetrics and Gynecology residency programs. Surveys were distributed to all Canadian Obstetrics and Gynecology residents and program directors. Data were collected on inclusion of abortion training in the curriculum, structure of the training and expected competency of residents in various abortion procedures. We distributed and collected surveys between November 2014 and May 2015. In total, 301 residents and 15 program directors responded, giving response rates of 55% and 94%, respectively. Based on responses by program directors, half of the programs had "opt-in" abortion training, and half of the programs had "opt-out" abortion training. Upon completion of residency, 66% of residents expected to be competent in providing first-trimester surgical abortion in an ambulatory setting, and 35% expected to be competent in second-trimester surgical abortion. Overall, 15% of residents reported that they were not aware of or did not have access to abortion training within their program, and 69% desired more abortion training during residency. Abortion training in Canadian Obstetrics and Gynecology residency programs is inconsistent, and residents desire more training in abortion. This suggests an ongoing unmet need for training in this area. Policies mandating standardized abortion training in obstetrics and gynecology residency programs are necessary to improve delivery of family planning services to Canadian women. Abortion training in Canadian Obstetrics and Gynecology residency programs is inconsistent, does not meet resident demand and is unlikely to fulfill the Royal College of Physicians and Surgeons of Canada objectives of training in the specialty. Copyright © 2016 Elsevier Inc. All rights reserved.

Comparison of Code Predictions to Test Measurements for Two Orifice Compensated Hydrostatic Bearings at High Reynolds Numbers

NASA Technical Reports Server (NTRS)

Keba, John E.

1996-01-01

Rotordynamic coefficients obtained from testing two different hydrostatic bearings are compared to values predicted by two different computer programs. The first set of test data is from a relatively long (L/D=1) orifice compensated hydrostatic bearing tested in water by Texas A&M University (TAMU Bearing No.9). The second bearing is a shorter (L/D=.37) bearing and was tested in a lower viscosity fluid by Rocketdyne Division of Rockwell (Rocketdyne 'Generic' Bearing) at similar rotating speeds and pressures. Computed predictions of bearing rotordynamic coefficients were obtained from the cylindrical seal code 'ICYL', one of the industrial seal codes developed for NASA-LeRC by Mechanical Technology Inc., and from the hydrodynamic bearing code 'HYDROPAD'. The comparison highlights the difference the bearing has on the accuracy of the predictions. The TAMU Bearing No. 9 test data is closely matched by the predictions obtained for the HYDROPAD code (except for added mass terms) whereas significant differences exist between the data from the Rocketdyne 'Generic' bearing the code predictions. The results suggest that some aspects of the fluid behavior in the shorter, higher Reynolds Number 'Generic' bearing may not be modeled accurately in the codes. The ICYL code predictions for flowrate and direct stiffness approximately equal those of HYDROPAD. Significant differences in cross-coupled stiffness and the damping terms were obtained relative to HYDROPAD and both sets of test data. Several observations are included concerning application of the ICYL code.

Intelligent Engine Systems Work Element 1.3: Sub System Health Management

NASA Technical Reports Server (NTRS)

Ashby, Malcolm; Simpson, Jeffrey; Singh, Anant; Ferguson, Emily; Frontera, mark

2005-01-01

The objectives of this program were to develop health monitoring systems and physics-based fault detection models for engine sub-systems including the start, lubrication, and fuel. These models will ultimately be used to provide more effective sub-system fault identification and isolation to reduce engine maintenance costs and engine down-time. Additionally, the bearing sub-system health is addressed in this program through identification of sensing requirements, a review of available technologies and a demonstration of a demonstration of a conceptual monitoring system for a differential roller bearing. This report is divided into four sections; one for each of the subtasks. The start system subtask is documented in section 2.0, the oil system is covered in section 3.0, bearing in section 4.0, and the fuel system is presented in section 5.0.

14 CFR 121.422 - Aircraft dispatchers: Initial and transition ground training.

Code of Federal Regulations, 2011 CFR

2011-01-01

... computations; (iv) Basic airplane performance dispatch requirements and procedures; (v) Flight planning including track selection, flight time analysis, and fuel requirements; and (vi) Emergency procedures. (3... procedures, and other subjects having a bearing on dispatcher duties and responsibilities; (ii) Flight...

14 CFR 121.422 - Aircraft dispatchers: Initial and transition ground training.

Code of Federal Regulations, 2012 CFR

2012-01-01

... computations; (iv) Basic airplane performance dispatch requirements and procedures; (v) Flight planning including track selection, flight time analysis, and fuel requirements; and (vi) Emergency procedures. (3... procedures, and other subjects having a bearing on dispatcher duties and responsibilities; (ii) Flight...

14 CFR 121.422 - Aircraft dispatchers: Initial and transition ground training.

Code of Federal Regulations, 2013 CFR

2013-01-01

... computations; (iv) Basic airplane performance dispatch requirements and procedures; (v) Flight planning including track selection, flight time analysis, and fuel requirements; and (vi) Emergency procedures. (3... procedures, and other subjects having a bearing on dispatcher duties and responsibilities; (ii) Flight...

14 CFR 121.422 - Aircraft dispatchers: Initial and transition ground training.

Code of Federal Regulations, 2010 CFR

2010-01-01

... computations; (iv) Basic airplane performance dispatch requirements and procedures; (v) Flight planning including track selection, flight time analysis, and fuel requirements; and (vi) Emergency procedures. (3... procedures, and other subjects having a bearing on dispatcher duties and responsibilities; (ii) Flight...

14 CFR 121.422 - Aircraft dispatchers: Initial and transition ground training.

Code of Federal Regulations, 2014 CFR

2014-01-01

... computations; (iv) Basic airplane performance dispatch requirements and procedures; (v) Flight planning including track selection, flight time analysis, and fuel requirements; and (vi) Emergency procedures. (3... procedures, and other subjects having a bearing on dispatcher duties and responsibilities; (ii) Flight...

25 CFR 26.30 - Does the Job Training Program provide part-time training or short-term training?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Does the Job Training Program provide part-time training or short-term training? 26.30 Section 26.30 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR HUMAN SERVICES JOB PLACEMENT AND TRAINING PROGRAM Training Services § 26.30 Does the Job Training...

Second International Symposium on Magnetic Suspension Technology, part 1

NASA Technical Reports Server (NTRS)

Groom, Nelson J. (Editor); Britcher, Colin P. (Editor)

1994-01-01

In order to examine the state of technology of all areas of magnetic suspension and to review related recent developments in sensors and controls approaches, superconducting magnet technology, and design/implementation practices, the Second International Symposium on Magnetic Suspension Technology was held. The symposium included 18 technical sessions in which 44 papers were presented. The technical sessions covered the areas of bearings, bearing modeling, controls, vibration isolation, micromachines, superconductivity, wind tunnel magnetic suspension systems, magnetically levitated trains (MAGLEV), rotating machinery and energy storage, and applications. A list of attendees appears at the end of the document.

76 FR 35474 - UAW-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-17

...-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On-Site Leased Workers From Cranks, O/E Learning, DBSI, IDEA, and Tonic/MVP, Detroit, MI; UAW-Chrysler Technical Training... workers and former workers of UAW-Chrysler Technical Training Center, Technology Training Joint Programs...

Training College Outdoor Program Leaders.

ERIC Educational Resources Information Center

Curtis, Rick

This paper describes a training program for college outdoor program leaders developed by the Outdoor Action Program at Princeton University (New Jersey). The training program includes a leader training course, a safety management seminar, a wilderness first aid course, cardiopulmonary resuscitation, and group skills workshop. This paper describes…

75 FR 13521 - Centers for Independent Living Program-Training and Technical Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-22

... DEPARTMENT OF EDUCATION Centers for Independent Living Program--Training and Technical Assistance... for Independent Living Program--Training and Technical Assistance (CIL-TA program). The Assistant... appropriated for the CIL program to provide training and technical assistance to CILs, agencies eligible to...

The polar bear in the room: diseases of poverty in the Arctic.

PubMed

Nelson, Chris

2013-01-01

In the face of global warming, budgetary austerity and impoverished Arctic residents, the nations of the circumpolar region are presented with a number of difficult choices regarding the provision of health care to the far-flung and isolated regions of their northernmost provinces. Complicating that picture is the reality of neglected tropical diseases in areas far from their perceived normal equatorial range as well as endemic food-borne diseases, including protozoan and helminth parasites, respiratory and gastrointestinal diseases and vaccine-preventable illnesses. This paper discusses the problems of caring for the health and well-being of indigenous populations suffering from extreme poverty, isolation and discrimination in the circumpolar region. After presenting difficulties as supported by the extant literature, the paper continues by suggesting solutions that include novel telenursing applications, targeted distance-educational programs and local community-based health care assistant (HCA) vocational training. These programs will provide cost-effective care that increases life-spans, improves quality of life and provides opportunities to distressed populations in isolated rural communities of the Far North. The toolkit presented in the paper is intended to spur discussion on community health programs that could be adopted to provide proper and humane care for marginalized Arctic populations in an extreme and rapidly changing environment.

Program Activity/Training Plans. STIP II (Skill Training Improvement Programs Round II).

ERIC Educational Resources Information Center

Los Angeles Community Coll. District, CA.

Detailed operational guidelines, training objectives, and learning activities are provided for the Los Angeles Community College District's Skill Training Improvement Programs (STIP II), which are designed to train students for immediate employment. The first of four reports covers Los Angeles Southwest College's computer programming trainee…

34 CFR 385.1 - What is the Rehabilitation Training program?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 2 2011-07-01 2010-07-01 true What is the Rehabilitation Training program? 385.1... § 385.1 What is the Rehabilitation Training program? (a) The Rehabilitation Training program is designed... CFR part 386). (2) Experimental and Innovative Training (34 CFR part 387). (3) State Vocational...

34 CFR 385.1 - What is the Rehabilitation Training program?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 34 Education 2 2014-07-01 2013-07-01 true What is the Rehabilitation Training program? 385.1... § 385.1 What is the Rehabilitation Training program? (a) The Rehabilitation Training program is designed... CFR part 386). (2) Experimental and Innovative Training (34 CFR part 387). (3) State Vocational...

34 CFR 428.1 - What is the Bilingual Vocational Instructor Training Program?

Code of Federal Regulations, 2011 CFR

2011-07-01

... TRAINING PROGRAM General § 428.1 What is the Bilingual Vocational Instructor Training Program? The Bilingual Vocational Instructor Training Program provides financial assistance for preservice and inservice... 34 Education 3 2011-07-01 2011-07-01 false What is the Bilingual Vocational Instructor Training...

34 CFR 428.1 - What is the Bilingual Vocational Instructor Training Program?

Code of Federal Regulations, 2012 CFR

2012-07-01

... TRAINING PROGRAM General § 428.1 What is the Bilingual Vocational Instructor Training Program? The Bilingual Vocational Instructor Training Program provides financial assistance for preservice and inservice... 34 Education 3 2012-07-01 2012-07-01 false What is the Bilingual Vocational Instructor Training...

34 CFR 428.1 - What is the Bilingual Vocational Instructor Training Program?

Code of Federal Regulations, 2010 CFR

2010-07-01

... TRAINING PROGRAM General § 428.1 What is the Bilingual Vocational Instructor Training Program? The Bilingual Vocational Instructor Training Program provides financial assistance for preservice and inservice... 34 Education 3 2010-07-01 2010-07-01 false What is the Bilingual Vocational Instructor Training...

34 CFR 428.1 - What is the Bilingual Vocational Instructor Training Program?

Code of Federal Regulations, 2013 CFR

2013-07-01

... TRAINING PROGRAM General § 428.1 What is the Bilingual Vocational Instructor Training Program? The Bilingual Vocational Instructor Training Program provides financial assistance for preservice and inservice... 34 Education 3 2013-07-01 2013-07-01 false What is the Bilingual Vocational Instructor Training...

34 CFR 428.1 - What is the Bilingual Vocational Instructor Training Program?

Code of Federal Regulations, 2014 CFR

2014-07-01

... TRAINING PROGRAM General § 428.1 What is the Bilingual Vocational Instructor Training Program? The Bilingual Vocational Instructor Training Program provides financial assistance for preservice and inservice... 34 Education 3 2014-07-01 2014-07-01 false What is the Bilingual Vocational Instructor Training...

Human-Wildlife Conflict and Environmental Education: Evaluating a Community Program to Protect the Andean Bear in Ecuador

ERIC Educational Resources Information Center

Espinosa, Santiago; Jacobson, Susan K.

2012-01-01

Environmental education is a widespread, yet relatively unexamined strategy to reduce human-wildlife conflicts. We evaluated knowledge, attitudes and behavioral intentions toward bear conservation after five years of environmental education in a Quichua community. Conflicts with livestock predation created mixed attitudes and behaviors toward bear…

Bypass control valve seal and bearing life cycle test report

NASA Technical Reports Server (NTRS)

Lundback, A. V.

1972-01-01

The operating characteristics of a bypass control valve seal and bearing life cycle tests are reported. Data from the initial assembly, leak, torque, and deflection tests are included along with the cycle life test results and conclusions. The equipment involved was to be used in the nuclear engine for the rocket vehicles program.

Development of a full-scale transmission testing procedure to evaluate advanced lubricants

NASA Technical Reports Server (NTRS)

Lewicki, David G.; Decker, Harry J.; Shimski, John T.

1992-01-01

Experimental tests were performed on the OH-58A helicopter main rotor transmission in the NASA Lewis 500-hp Helicopter Transmission Test Stand. The testing was part of a joint Navy/NASA/Army lubrication program. The objective of the program was to develop a separate lubricant for gearboxes and demonstrate an improved performance in life and load-carrying capacity. The goal of the experiments was to develop a testing procedure to fail certain transmission components using a MIL-L-23699 base reference oil, then run identical tests with improved lubricants and demonstrate performance. The tests were directed at failing components that the Navy has had problems with due to marginal lubrication. These failures included mast shaft bearing micropitting, sun gear and planet bearing fatigue, and spiral bevel gear scoring. A variety of tests were performed and over 900 hours of total run time accumulated for these tests. Some success was achieved in developing a testing procedure to produce sun gear and planet bearing fatigue failures. Only marginal success was achieved in producing mast shaft bearing micropitting and spiral bevel gear scoring.

Exceptional Children Conference Papers: Training and Personnel in Early Childhood Education Programs.

ERIC Educational Resources Information Center

Council for Exceptional Children, Arlington, VA.

Four papers discuss training and personnel in early childhood education. The concepts developed by the Division of Training Programs in seeking to award a grant for planning inservice training programs are described by J. Gerald Minskoff as is the role of a training coordinator. An evaluation of a pilot program to train teacher aides is presented…

System Being Developed to Measure the Rotordynamic Characteristics of Air Foil Bearings

NASA Technical Reports Server (NTRS)

Howard, Samuel A.; DellaCorte, Christopher; Valco, Mark J.

2000-01-01

Because of the many possible advantages of oil-free engine operation, interest in using air lubricated foil-bearing technology in advanced oil-free engine concepts has recently increased. The Oil-Free Turbomachinery Program at the NASA Glenn Research Center at Lewis Field has partially driven this recent push for oil-free technology. The program's goal of developing an innovative, practical, oil-free gas turbine engine for aeropropulsion began with the development of NASA's high-temperature solid-lubricant coating, PS304. This coating virtually eliminates the life-limiting wear that occurs during the startup and shutdown of the bearings. With practically unlimited life, foil air bearings are now very attractive to rotating machinery designers for use in turbomachinery. Unfortunately, the current knowledge base of these types of bearings is limited. In particular, the understanding of how these types of bearings contribute to the rotordynamic stability of turbomachinery is insufficient for designers to design with confidence. Recent work in oil-free turbomachinery has concentrated on advancing the understanding of foil bearings. A high-temperature fiber-optic displacement probe system and measurement method were developed to study the effects of speed, load, temperature, and other environmental issues on the stiffness characteristics of air foil bearings. Since high temperature data are to be collected in future testing, the testing method was intentionally simplified to minimize the need for expensive test hardware. The method measures the displacement induced upon a bearing in response to an applied perturbation load. The early results of these studies, which are shown in the accompanying figure, indicate trends in steady state stiffness that suggest stiffness increases with load and decreases with speed. It can be seen, even from these data, that stiffness is not expected to change by orders of magnitude over the normal operating range of most turbomachinery; a promising sign for their eventual integration into oil-free turbomachines. Planned future testing will generate similar plots for stiffness changes with temperature and geometry, as well as damping data. The data collected by this method represent a critical step toward understanding how to successfully apply foil air bearings to future oil-free turbomachinery systems.

49 CFR 227.119 - Training program.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Training program. 227.119 Section 227.119... Employees. § 227.119 Training program. (a) The railroad shall institute an occupational noise and hearing conservation training program for all employees included in the hearing conservation program. (1) The railroad...

49 CFR 655.14 - Education and training programs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false Education and training programs. 655.14 Section... OPERATIONS Program Requirements § 655.14 Education and training programs. Each employer shall establish an employee education and training program for all covered employees, including: (a) Education. The education...

49 CFR 655.14 - Education and training programs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Education and training programs. 655.14 Section... OPERATIONS Program Requirements § 655.14 Education and training programs. Each employer shall establish an employee education and training program for all covered employees, including: (a) Education. The education...

49 CFR 655.14 - Education and training programs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false Education and training programs. 655.14 Section... OPERATIONS Program Requirements § 655.14 Education and training programs. Each employer shall establish an employee education and training program for all covered employees, including: (a) Education. The education...

49 CFR 655.14 - Education and training programs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 7 2014-10-01 2014-10-01 false Education and training programs. 655.14 Section... OPERATIONS Program Requirements § 655.14 Education and training programs. Each employer shall establish an employee education and training program for all covered employees, including: (a) Education. The education...

49 CFR 655.14 - Education and training programs.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false Education and training programs. 655.14 Section... OPERATIONS Program Requirements § 655.14 Education and training programs. Each employer shall establish an employee education and training program for all covered employees, including: (a) Education. The education...

[Thinking about several problems of the research of our family planning strategy].

PubMed

Shi, H

1989-03-01

On the basis of 1982 census data, it is estimated that from 1987-1997 13 million women will enter the age of marriage and child-bearing each year. The tasks of keeping the population size around 1.2 billion by the year 2000 is arduous. Great efforts have to be made to continue encouraging one child/couple, and to pursue the current plans and policies and maintain strict control over fertility. Keeping population growth in pace with economic growth, environment, ecological balance, availability of per capita resources, education programs, employment capability, health services, maternal and child care, social welfare and social security should be a component of the long term development strategy of the country. Family planning is a comprehensive program which involves long cycles and complicated factors, viewpoints of expediency in guiding policy and program formulation for short term benefits are inappropriate. The emphasis of family planning program strategy should be placed on the rural areas where the majority of population reside. Specifically, the major aspects of strategic thrusts should be the linkage between policy implementation and reception, between family planning publicity and changes of ideation on fertility; the integrated urban and rural program management relating to migration and differentiation of policy towards minority population and areas in different economic development stages. In order to achieve the above strategies, several measures are proposed. (1) strengthening family planning program and organization structure; (2) providing information on population and contraception; (3) establishing family planning program network for infiltration effects; (4) using government financing, taxation, loan, social welfare and penalty to regulate fertility motivations; (5) improving the system of target allocation and data reporting to facilitate program implementation; (6) strengthening population projection and policy research; (7) and strengthening training of family planning personnel to improve program efficiency.

Oil-Free Turbomachinery Research Enhanced by Thrust Bearing Test Capability

NASA Technical Reports Server (NTRS)

Bauman, Steven W.

2003-01-01

NASA Glenn Research Center s Oil-Free Turbomachinery research team is developing aircraft turbine engines that will not require an oil lubrication system. Oil systems are required today to lubricate rolling-element bearings used by the turbine and fan shafts. For the Oil-Free Turbomachinery concept, researchers combined the most advanced foil (air) bearings from industry with NASA-developed high-temperature solid lubricant technology. In 1999, the world s first Oil-Free turbocharger was demonstrated using these technologies. Now we are working with industry to demonstrate Oil-Free turbomachinery technology in a small business jet engine, the EJ-22 produced by Williams International and developed during Glenn s recently concluded General Aviation Propulsion (GAP) program. Eliminating the oil system in this engine will make it simpler, lighter (approximately 15 percent), more reliable, and less costly to purchase and maintain. Propulsion gas turbines will place high demands on foil air bearings, especially the thrust bearings. Up until now, the Oil-Free Turbomachinery research team only had the capability to test radial, journal bearings. This research has resulted in major improvements in the bearings performance, but journal bearings are cylindrical, and can only support radial shaft loads. To counteract axial thrust loads, thrust foil bearings, which are disk shaped, are required. Since relatively little research has been conducted on thrust foil air bearings, their performance lags behind that of journal bearings.

Programmed administration of parathyroid hormone increases bone formation and reduces bone loss in hindlimb-unloaded ovariectomized rats

NASA Technical Reports Server (NTRS)

Turner, R. T.; Evans, G. L.; Cavolina, J. M.; Halloran, B.; Morey-Holton, E.

1998-01-01

Gonadal insufficiency and reduced mechanical usage are two important risk factors for osteoporosis. The beneficial effects of PTH therapy to reverse the estrogen deficiency-induced bone loss in the laboratory rat are well known, but the influence of mechanical usage in this response has not been established. In this study, the effects of programed administration of PTH on cancellous bone volume and turnover at the proximal tibial metaphysis were determined in hindlimb-unloaded, ovariectomized (OVX), 3-month-old Sprague-Dawley rats. PTH was administered to weight-bearing and hindlimb-unloaded OVX rats with osmotic pumps programed to deliver 20 microg human PTH (approximately 80 microg/kg x day) during a daily 1-h infusion for 7 days. Compared with sham-operated rats, OVX increased longitudinal and radial bone growth, increased indexes of cancellous bone turnover, and resulted in net resorption of cancellous bone. Hindlimb unloading of OVX rats decreased longitudinal and radial bone growth, decreased osteoblast number, increased osteoclast number, and resulted in a further decrease in cancellous bone volume compared with those in weight-bearing OVX rats. Programed administration of PTH had no effect on either radial or longitudinal bone growth in weight-bearing and hindlimb-unloaded OVX rats. PTH treatment had dramatic effects on selected cancellous bone measurements; PTH maintained cancellous bone volume in OVX weight-bearing rats and greatly reduced cancellous bone loss in OVX hindlimb-unloaded rats. In the latter animals, PTH treatment prevented the hindlimb unloading-induced reduction in trabecular thickness, but the hormone was ineffective in preventing either the increase in osteoclast number or the loss of trabecular plates. Importantly, PTH treatment increased the retention of a baseline flurochrome label, osteoblast number, and bone formation in the proximal tibial metaphysis regardless of the level of mechanical usage. These findings demonstrate that programed administration of PTH is effective in increasing osteoblast number and bone formation and has beneficial effects on bone volume in the absence of weight-bearing and gonadal hormones. We conclude that the actions of PTH on cancellous bone are independent of the level of mechanical usage.

Mapping training needs for dissemination and implementation research: lessons from a synthesis of existing D&I research training programs.

PubMed

Chambers, David A; Proctor, Enola K; Brownson, Ross C; Straus, Sharon E

2017-09-01

With recent growth in the field of dissemination and implementation (D&I) research, multiple training programs have been developed to build capacity, including summer training institutes, graduate courses, degree programs, workshops, and conferences. While opportunities for D&I research training have expanded, course organizers acknowledge that available slots are insufficient to meet demand within the scientific and practitioner community. In addition, individual programs have struggled to best fit various needs of trainees, sometimes splitting coursework between specific D&I content and more introductory grant writing material. This article, stemming from a 2013 NIH workshop, reviews experiences across multiple training programs to align training needs, career stage and role, and availability of programs. We briefly review D&I needs and opportunities by career stage and role, discuss variations among existing training programs in format, mentoring relationships, and other characteristics, identify challenges of mapping needs of trainees to programs, and present recommendations for future D&I research training.

Multiple Teacher Training Programs: Information on Budgets, Services, and Target Groups. Fact Sheet for the Chairman, Budget Committee, House of Representatives.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC. Health, Education, and Human Services Div.

This study examined the total number of federally funded teacher training programs (excluding student loans and grants that could be used for teacher training), the budget obligations for teacher training programs, the number of teachers trained by these programs, and differences in services across the programs. The study found that in fiscal year…

Management Training, Yes! Excellence?

ERIC Educational Resources Information Center

Davis, Gary E.

1990-01-01

Management training programs are a necessity for transportation supervisors. Basic and advanced training programs are available through associations for business officials and university fleet management training programs. (MLF)

34 CFR 263.4 - What training costs may a Professional Development program include?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 1 2010-07-01 2010-07-01 false What training costs may a Professional Development... GRANT PROGRAMS Professional Development Program § 263.4 What training costs may a Professional Development program include? (a) A Professional Development program may include, as training costs, assistance...

34 CFR 263.4 - What training costs may a Professional Development program include?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 1 2011-07-01 2011-07-01 false What training costs may a Professional Development... GRANT PROGRAMS Professional Development Program § 263.4 What training costs may a Professional Development program include? (a) A Professional Development program may include, as training costs, assistance...

Payload training methodology study

NASA Technical Reports Server (NTRS)

1990-01-01

The results of the Payload Training Methodology Study (PTMS) are documented. Methods and procedures are defined for the development of payload training programs to be conducted at the Marshall Space Flight Center Payload Training Complex (PCT) for the Space Station Freedom program. The study outlines the overall training program concept as well as the six methodologies associated with the program implementation. The program concept outlines the entire payload training program from initial identification of training requirements to the development of detailed design specifications for simulators and instructional material. The following six methodologies are defined: (1) The Training and Simulation Needs Assessment Methodology; (2) The Simulation Approach Methodology; (3) The Simulation Definition Analysis Methodology; (4) The Simulator Requirements Standardization Methodology; (5) The Simulator Development Verification Methodology; and (6) The Simulator Validation Methodology.

Using Adult Learning Theory for New-Hire Training

ERIC Educational Resources Information Center

Woodard, Chris A.

2007-01-01

To test if adult learning theory can inform a training program for newly-hired employees in industry, a training program was set up using Knowles' concepts of andragogy. Evaluation results from before and after the new training program indicate that the perceptions of those in the new training program changed in a positive direction. This…

STS-134 crew during EVA TPS Overview training in the TPS/PABF

NASA Image and Video Library

2009-12-15

JSC2009-E-284897 (15 Dec. 2009) --- STS-134 crew members participate in an EVA Thermal Protection System (TPS) overview training session in the TPS/ Precision Air Bearing Facility in the Space Vehicle Mock-up Facility at NASA?s Johnson Space Center. Pictured from the right are NASA astronauts Andrew Feustel, Greg Chamitoff, Michael Fincke, all mission specialists; along with NASA astronaut Gregory H. Johnson, pilot; and European Space Agency astronaut Roberto Vittori, mission specialist. John Ray (left) assisted the crew members.

75 FR 57472 - Clinical Investigator Training Course

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-21

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-N-0456... scientific, regulatory, and ethical considerations involved in the conduct of clinical trials. DATES: The... development of medical products. They bear the responsibility for ensuring the safe and ethical treatment of...

Subspeciality training in hematology and oncology, 2003: results of a survey of training program directors conducted by the American Society of Hematology.

PubMed

Todd, Robert F; Gitlin, Scott D; Burns, Linda J

2004-06-15

A survey of directors of adult and pediatric hematology/oncology subspecialty training programs in the United States and Canada was conducted to assess the environment in which recruitment and training is conducted in these medical disciplines. A total of 107 program directors responded to the survey, representing 66% of internal medicine and 47% of pediatric subspecialty programs in hematology or hematology/oncology. Specific areas covered in the web-based questionnaire included the type and demographics of the training program, profile of the training program director, characteristics of the applicant pool and existing trainee recruits, characteristics of the training program environment and curricula, research productivity of trainees, and the career pathways taken by recent training program graduates (including dominant areas of clinical interest). The results of this survey show considerable heterogeneity in the recruiting practices and the environment in which subspecialty training occurs, leading the authors to recommend improvements in or a heightened attention to issues, including recruitment of minority trainees, flexibility to recruit international medical school graduates, timing of trainee acceptance, maintaining the financial support of Medicare graduation medical education (GME), training of physician scientists, organization of the continuity clinic experience, visibility of nonmalignant hematology as a career path, and level of training program director support.

Software Review.

ERIC Educational Resources Information Center

McGrath, Diane, Ed.

1989-01-01

Reviewed is a computer software package entitled "Audubon Wildlife Adventures: Grizzly Bears" for Apple II and IBM microcomputers. Included are availability, hardware requirements, cost, and a description of the program. The murder-mystery flavor of the program is stressed in this program that focuses on illegal hunting and game…

Neural network analysis of crosshole tomographic images: The seismic signature of gas hydrate bearing sediments in the Mackenzie Delta (NW Canada)

NASA Astrophysics Data System (ADS)

Bauer, K.; Pratt, R. G.; Haberland, C.; Weber, M.

2008-10-01

Crosshole seismic experiments were conducted to study the in-situ properties of gas hydrate bearing sediments (GHBS) in the Mackenzie Delta (NW Canada). Seismic tomography provided images of P velocity, anisotropy, and attenuation. Self-organizing maps (SOM) are powerful neural network techniques to classify and interpret multi-attribute data sets. The coincident tomographic images are translated to a set of data vectors in order to train a Kohonen layer. The total gradient of the model vectors is determined for the trained SOM and a watershed segmentation algorithm is used to visualize and map the lithological clusters with well-defined seismic signatures. Application to the Mallik data reveals four major litho-types: (1) GHBS, (2) sands, (3) shale/coal interlayering, and (4) silt. The signature of seismic P wave characteristics distinguished for the GHBS (high velocities, strong anisotropy and attenuation) is new and can be used for new exploration strategies to map and quantify gas hydrates.

Return to Flight: Crew Activities Resource Reel 1 of 2

NASA Technical Reports Server (NTRS)

2005-01-01

The crew of the STS-114 Discovery Mission is seen in various aspects of training for space flight. The crew activities include: 1) STS-114 Return to Flight Crew Photo Session; 2) Tile Repair Training on Precision Air Bearing Floor; 3) SAFER Tile Inspection Training in Virtual Reality Laboratory; 4) Guidance and Navigation Simulator Tile Survey Training; 5) Crew Inspects Orbital Boom and Sensor System (OBSS); 6) Bailout Training-Crew Compartment; 7) Emergency Egress Training-Crew Compartment Trainer (CCT); 8) Water Survival Training-Neutral Buoyancy Lab (NBL); 9) Ascent Training-Shuttle Motion Simulator; 10) External Tank Photo Training-Full Fuselage Trainer; 11) Rendezvous and Docking Training-Shuttle Engineering Simulator (SES) Dome; 12) Shuttle Robot Arm Training-SES Dome; 13) EVA Training Virtual Reality Lab; 14) EVA Training Neutral Buoyancy Lab; 15) EVA-2 Training-NBL; 16) EVA Tool Training-Partial Gravity Simulator; 17) Cure in Place Ablator Applicator (CIPAA) Training Glove Vacuum Chamber; 16) Crew Visit to Merritt Island Launch Area (MILA); 17) Crew Inspection-Space Shuttle Discovery; and 18) Crew Inspection-External Tank and Orbital Boom and Sensor System (OBSS). The crew are then seen answering questions from the media at the Space Shuttle Landing Facility.

Electrochemical air revitalization system optimization investigation

NASA Technical Reports Server (NTRS)

Woods, R. R.; Schubert, F. H.; Hallick, T. M.

1975-01-01

A program to characterize a Breadboard of an Electrochemical Air Revitalization System (BEARS) was successfully completed. The BEARS is composed of three components: (1) a water vapor electrolysis module (WVEM) for O2 production and partial humidity control, (2) an electrochemical depolarized carbon dioxide concentrator module (EDCM) for CO2 control, and (3) a power-sharing controller, designed to utilize the power produced by the EDCM to partially offset the WVEM power requirements. It is concluded from the results of this work that the concept of electrochemical air revitalization with power-sharing is a viable solution to the problem of providing a localized topping force for O2 generation, CO2 removal and partial humidity control aboard manned spacecraft. Continued development of the EARS concept is recommended, applying the operational experience and limits identified during the BEARS program to testing of a one-man capacity system and toward the development of advanced system controls to optimize EARS operation for given interfaces and requirements. Successful completion of this development will produce timely technology necessary to plan future advanced environmental control and life support system programs and experiments.

48 CFR 470.101 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... shipment. The buyer bears all costs and risks of loss of or damage to the goods from that moment. Free... Education and Child Nutrition Program; and any other international food assistance program. Ingredient means...

48 CFR 470.101 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... shipment. The buyer bears all costs and risks of loss of or damage to the goods from that moment. Free... Education and Child Nutrition Program; and any other international food assistance program. Ingredient means...

48 CFR 470.101 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... shipment. The buyer bears all costs and risks of loss of or damage to the goods from that moment. Free... Education and Child Nutrition Program; and any other international food assistance program. Ingredient means...

48 CFR 470.101 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... shipment. The buyer bears all costs and risks of loss of or damage to the goods from that moment. Free... Education and Child Nutrition Program; and any other international food assistance program. Ingredient means...

Information Technology Training in India toward Globalization

NASA Astrophysics Data System (ADS)

Yamashita, Katsuhiko

This paper describes Toshiba‧s training program in Information Technology in India. It is not a simple technology training, but a training for globalization of Japanese engineers so that they can cope with people from different culture and business practices. We first describe why such training program became necessary. We then describe how the training courses and contents are developed. The operation of the training program and our effort in continual improvement are explained. The effectiveness of the program is also evaluated. The training program presented is a first in its kind and we believe that it can contribute to changing Toshiba from inside toward more globalized corporation. We also believe that this kind of overseas training is effective in training young students so that they can cope with globalizing society after graduation.

Comparison of predicted and experimental performance of large-bore roller bearing operating to 3.0 million DN

NASA Technical Reports Server (NTRS)

Coe, H. H.; Huller, F. T.

1980-01-01

Bearing inner and outer race temperatures and the amount of heat transferred to the lubricant were calculated by using the computer program CYBEAN. The results obtained were compared with previously reported experimental data for a 118 mm bore roller bearing that operated at shaft speeds to 25,500 rpm, radial loads to 8,900 N (2000 lb), and total lubricant flow rates to 0.0102 cu m/min (2.7 gal/min). The calculated results compared well with the experimental data.

Preparing the Communication Specialist: Some Implications of an Ongoing "Train the Trainer" Program in One Industry.

ERIC Educational Resources Information Center

Shaw, Mark R.; Caplette, Michele

Interviews with six managers trained to teach the Interpersonal Managing Skills (IMS) program at the Lockheed Missiles and Space Company provided insights into three aspects of communication training programs: training skills, the trainer role, and methods of training the trainer. A highly structured, packaged program, IMS teaches five…

Rehabilitation Training Program and Special Capacity Building Program, 1997-1998: Catalog of Projects under the Rehabilitation Services Administration.

ERIC Educational Resources Information Center

Office of Special Education and Rehabilitative Services (ED), Washington, DC.

This directory lists programs funded by rehabilitation training grants funded under the Rehabilitation Act of 1973 (Section 304a). These programs are grouped under the following categories: (1) rehabilitation long-term training; (2) experimental and innovative training; (3) state vocational rehabilitation unit in-service training; (4)…

Optimal design of a for middle-low-speed maglev trains

NASA Astrophysics Data System (ADS)

Xiao, Song; Zhang, Kunlun; Liu, Guoqing; Jing, Yongzhi; Sykulski, Jan K.

2018-04-01

A middle-low-speed maglev train is supported by an electromagnetic force between the suspension electromagnet (EM) and the steel rail and is driven by a linear induction motor. The capability of the suspension system has a direct bearing on safety and the technical and economic performance of the train. This paper focuses on the dependence of the electromagnetic force on the structural configuration of the EM with the purpose of improving performance of a conventional EM. Finally, a novel configuration is proposed of a hybrid suspension magnet, which combines permanent magnets and coils, in order to increase the suspension force while reducing the suspension power loss.

Variability of ethics education in laboratory medicine training programs: results of an international survey.

PubMed

Bruns, David E; Burtis, Carl A; Gronowski, Ann M; McQueen, Matthew J; Newman, Anthony; Jonsson, Jon J

2015-03-10

Ethical considerations are increasingly important in medicine. We aimed to determine the mode and extent of teaching of ethics in training programs in clinical chemistry and laboratory medicine. We developed an on-line survey of teaching in areas of ethics relevant to laboratory medicine. Reponses were invited from directors of training programs who were recruited via email to leaders of national organizations. The survey was completed by 80 directors from 24 countries who directed 113 programs. The largest numbers of respondents directed postdoctoral training of scientists (42%) or physicians (33%), post-masters degree programs (33%), and PhD programs (29%). Most programs (82%) were 2years or longer in duration. Formal training was offered in research ethics by 39%, medical ethics by 31%, professional ethics by 24% and business ethics by 9%. The number of reported hours of formal training varied widely, e.g., from 0 to >15h/year for research ethics and from 0 to >15h for medical ethics. Ethics training was required and/or tested in 75% of programs that offered training. A majority (54%) of respondents reported plans to add or enhance training in ethics; many indicated a desire for online resources related to ethics, especially resources with self-assessment tools. Formal teaching of ethics is absent from many training programs in clinical chemistry and laboratory medicine, with heterogeneity in the extent and methods of ethics training among the programs that provide the training. A perceived need exists for online training tools, especially tools with self-assessment components. Copyright © 2014 Elsevier B.V. All rights reserved.

School-Age Parents: Federal Programs and Policies Relevant to Pregnant or Parenting Secondary Students.

ERIC Educational Resources Information Center

Moore, Kristin A.

Federal programs and policies that affect pregnant and parenting teenagers, particularly those programs that are of relevance to schools, are briefly described. The main categories of programs and legislation described are: (1) those bearing on teenage parents and education; (2) pre-school programs; (3) day care; (4) welfare; (5) social services;…

Genomic sequencing of Pleistocene cave bears

DOE Office of Scientific and Technical Information (OSTI.GOV)

Noonan, James P.; Hofreiter, Michael; Smith, Doug

2005-04-01

Despite the information content of genomic DNA, ancient DNA studies to date have largely been limited to amplification of mitochondrial DNA due to technical hurdles such as contamination and degradation of ancient DNAs. In this study, we describe two metagenomic libraries constructed using unamplified DNA extracted from the bones of two 40,000-year-old extinct cave bears. Analysis of {approx}1 Mb of sequence from each library showed that, despite significant microbial contamination, 5.8 percent and 1.1 percent of clones in the libraries contain cave bear inserts, yielding 26,861 bp of cave bear genome sequence. Alignment of this sequence to the dog genome,more » the closest sequenced genome to cave bear in terms of evolutionary distance, revealed roughly the expected ratio of cave bear exons, repeats and conserved noncoding sequences. Only 0.04 percent of all clones sequenced were derived from contamination with modern human DNA. Comparison of cave bear with orthologous sequences from several modern bear species revealed the evolutionary relationship of these lineages. Using the metagenomic approach described here, we have recovered substantial quantities of mammalian genomic sequence more than twice as old as any previously reported, establishing the feasibility of ancient DNA genomic sequencing programs.« less

The effect of weight-bearing exercise and non-weight-bearing exercise on gait in rats with sciatic nerve crush injury.

PubMed

Kim, Ki-Hyun; Hwangbo, Gak; Kim, Seong-Gil

2015-04-01

[Purpose] The purpose of this study was to access the effect of weight bearing exercise (treadmill exercise) and non-weight-bearing exercise (swimming exercise) on gait in the recovery process after a sciatic nerve crush injury. [Subjects and Methods] Rats were randomly divided into a swimming group (n=3) with non-weight-bearing exercise after a sciatic nerve crush and a treadmill group (n=3) with weight bearing exercise after a sciatic nerve crush. Dartfish is a program that can analyze and interpret motion through video images. The knee lateral epicondyle, lateral malleolus, and metatarsophalangeal joint of the fifth toe were marked by black dots before recording. [Results] There were significant differences in TOK (knee angle toe off) and ICK (knee angle at initial contact) in the swimming group and in TOK, ICA (ankle angle at initial contact), and ICK in the treadmill group. In comparison between groups, there were significant differences in TOA (ankle angle in toe off) and ICA at the 7th day. [Conclusion] There was no difference between weight bearing and non-weight-bearing exercise in sciatic nerve damage, and both exercises accelerated the recovery process in this study.

Advancements Toward Oil-Free Rotorcraft Propulsion

NASA Technical Reports Server (NTRS)

Howard, Samuel A.; Bruckner, Robert J.; Radil, Kevin C.

2010-01-01

NASA and the Army have been working for over a decade to advance the state-of-the-art (SOA) in Oil-Free Turbomachinery with an eye toward reduced emissions and maintenance, and increased performance and efficiency among other benefits. Oil-Free Turbomachinery is enabled by oil-free gas foil bearing technology and relatively new high-temperature tribological coatings. Rotorcraft propulsion is a likely candidate to apply oil-free bearing technology because the engine size class matches current SOA for foil bearings and because foil bearings offer the opportunity for higher speeds and temperatures and lower weight, all critical issues for rotorcraft engines. This paper describes an effort to demonstrate gas foil journal bearing use in the hot section of a full-scale helicopter engine core. A production engine hot-core location is selected as the candidate foil bearing application. Rotordynamic feasibility, bearing sizing, and load capability are assessed. The results of the program will help guide future analysis and design in this area by documenting the steps required and the process utilized for successful application of oil-free technology to a full-scale engine.

Finite element solution of lubrication problems

NASA Technical Reports Server (NTRS)

Reddi, M. M.

1971-01-01

A variational formulation of the transient lubrication problem is presented and the corresponding finite element equations derived for three and six point triangles, and, four and eight point quadrilaterals. Test solutions for a one dimensional slider bearing used in validating the computer program are given. Utility of the method is demonstrated by a solution of the shrouded step bearing.

Audubon Wildlife Adventures. Grizzly Guidebook. School Edition.

ERIC Educational Resources Information Center

National Audubon Society, Washington, DC.

This program introduces the young computer players to the world of the grizzly bear, the largest land carnivore in North America. Through a series of four interactive stories, players learn of the bear's habits and human activities that have brought it close to extinction. Playing the part of a park ranger, a research biologist or a natural…

Detecting genotyping errors and describing black bear movement in northern Idaho

Treesearch

Michael K. Schwartz; Samuel A. Cushman; Kevin S. McKelvey; Jim Hayden; Cory Engkjer

2006-01-01

Non-invasive genetic sampling has become a favored tool to enumerate wildlife. Genetic errors, caused by poor quality samples, can lead to substantial biases in numerical estimates of individuals. We demonstrate how the computer program DROPOUT can detect amplification errors (false alleles and allelic dropout) in a black bear (Ursus americanus) dataset collected in...

Monitoring the welfare of polar bear populations in a rapidly changing Arctic

USGS Publications Warehouse

Atwood, Todd C.; Duncan, Colleen G.; Patyk, Kelly A.; Sonsthagen, Sarah A.

2017-01-01

Most programs for monitoring the welfare of wildlife populations support efforts aimed at reaching discrete management objectives, like mitigating conflict with humans. While such programs can be effective, their limited scope may preclude systemic evaluations needed for large-scale conservation initiatives, like the recovery of at-risk species. We discuss select categories of metrics that can be used to monitor how polar bears (Ursus maritimus) are responding to the primary threat to their long-term persistence—loss of sea ice habitat due to the unabated rise in atmospheric greenhouse gas (GHG; e.g., CO2) concentrations—that can also provide information on ecosystem function and health. Monitoring key aspects of polar bear population dynamics, spatial behavior, health and resiliency can provide valuable insight into ecosystem state and function, and could be a powerful tool for achieving Arctic conservation objectives, particularly those that have transnational policy implications.

Thermal Analysis of the MC1 Engine Turbopump

NASA Technical Reports Server (NTRS)

Roman, Jose; Turner, Larry D. (Technical Monitor)

2001-01-01

The MC1 Engine turbopump supplied the propellants to the main injector. The turbopump consisted of four parts; lox pump, interpropellant seal package (IPS), RP pump and turbine. The thermal analysis was divided into two 2D finite element models; Housing or stationary parts and rotor or rotating parts. Both models were analyzed at the same boundary conditions using SINDA. The housing model consisted of, lox pump housing, ips housing, RP housing, turbine inlet housing, turbine housing, exit guide vane, heat shield and both bearing outer races. The rotor model consisted of the lox impeller; lox end bearing and id race, RP impeller, and RP bearing and id race, shaft and turbine disk. The objectives of the analysis were to: (1) verified the original design and recommend modifications to it, (2) submitted a thermal environment to support the structural analysis, (3) support the component and engine test program. and (4) to support the X34 vehicle program.

Thermal Analysis of the MCI Engine Turbopump

NASA Technical Reports Server (NTRS)

Roman, Jose

2002-01-01

The MCI Engine turbopump supplied the propellants to the main injector. The turbopump consisted of four parts; lox pump, interpropellant seal package (IPS), RP pump and turbine. The thermal analysis was divided into two 2D finite element models; Housing or stationary parts and rotor or rotating parts. Both models were analyzed at the same boundary conditions using SINDA. The housing model consisted of; lox pump housing, ips housing, RP housing, turbine inlet housing, turbine housing, exit guide vane, heat shield and both bearing outer races. The rotor model consisted of the lox impeller; lox end bearing and id race, RP impeller, and RP bearing and id race, shaft and turbine disk. The objectives of the analysis were to (1) verified the original design and recommend modifications to it, (2) submitted a thermal environment to support the structural analysis, (3) support the component and engine test program and (4) to support the X34 vehicle program.

Static characteristics design of hydrostatic guide-ways based on fluid-structure interactions

NASA Astrophysics Data System (ADS)

Lin, Shuo; Yin, YueHong

2016-10-01

With the raising requirements in micro optical systems, the available machines become hard to achieve the process dynamic and accuracy in all aspects. This makes compact design based on fluid/structure interactions (FSI) important. However, there is a difficulty in studying FSI with oil film as fluid domain. This paper aims at static characteristic design of a hydrostatic guide-way with capillary restrictors based on FSI. The pressure distribution of the oil film land is calculated by solving the Reynolds-equation with Galerkin technique. The deformation of structure is calculated by commercial FEM software, MSC. Nastran. A matlab program is designed to realize the coupling progress by modifying the load boundary in the submitting file and reading the deformation result. It's obvious that the stiffness of the hydrostatic bearing decreases with the weakening of the bearing structure. This program is proposed to make more precise prediction of bearing stiffness.

Computer aided design of digital controller for radial active magnetic bearings

NASA Technical Reports Server (NTRS)

Cai, Zhong; Shen, Zupei; Zhang, Zuming; Zhao, Hongbin

1992-01-01

A five degree of freedom Active Magnetic Bearing (AMB) system is developed which is controlled by digital controllers. The model of the radial AMB system is linearized and the state equation is derived. Based on the state variables feedback theory, digital controllers are designed. The performance of the controllers are evaluated according to experimental results. The Computer Aided Design (CAD) method is used to design controllers for magnetic bearings. The controllers are implemented with a digital signal processing (DSP) system. The control algorithms are realized with real-time programs. It is very easy to change the controller by changing or modifying the programs. In order to identify the dynamic parameters of the controlled magnetic system, a special experiment was carried out. Also, the online Recursive Least Squares (RLS) parameter identification method is studied. It can be realized with the digital controllers. Online parameter identification is essential for the realization of an adaptive controller.

Introduction of information and communication technologies in havana polyclinics: phase one evaluation.

PubMed

Llanusa, Susana B; Rojo, Nereida; Caraballoso, Magali; Pérez, Julia S

2008-04-01

Introduction Information and communication technologies were introduced in community-based polyclinics as a result of a Cuban health system policy to make information more readily accessible to health professionals and other health workers at the primary health care level. Objective Assess phase one of the Program to Introduce Information and Communication Technologies in Primary Health Care (PICT-PHC), as implemented in Havana, and in particular to determine the aspects of structure, process and outcomes with the greatest impact on this phase's effectiveness. Methods From May to October 2003, an assessment was carried out in all Havana community-based polyclinics where phase one of the Program was underway. Study dimensions, criteria, and standards were established through consultation with experts and considering the level of performance expected by program directors, thus providing timely analysis to the directors concerning problem areas in need of attention. This paper concentrates on the five dimensions which were thought to have the most bearing on effectiveness of information and communication technologies (ICTs) installed in the polyclinics' libraries: librarians' competencies in IT skills, training received by librarians, training received by users, Program monitoring and follow-up, and exploitation of the technologies. Six data collection instruments were devised. Participants in the study included 41 librarians and 544 users. Data were processed to obtain indicators corresponding to study criteria. Each indicator was then compared with the established standard. Validity of results was established through analysis and comparison. Results Overall, the first phase of the PICT-PHC in Havana succeeded in making online information resources more readily available to health professionals and technicians. Some librarians had insufficient basic IT competencies, which had an impact on the quality of their work. Moreover, it was found that monitoring and follow-up activities were focused chiefly on implementation process rather than outcomes. There was consistency between the achievements and problems found for some criteria and dimensions, and their impact on related ones. Conclusion This study furnished evidence of the need for greater emphasis on human resources training (particularly of librarians) in the use of ICTs in the primary health care system. Information and communication technologies, ICTs, primary health care, public health informatics, medical informatics applications, library science, access to information, public health, health systems, informatics, Health Information Technologies, HIT.

Strategic National HRD Initiatives: Lessons from the Management Training Program of Japan. [and] Invited Reaction: The Little-Known Impact of U.S. Training Programs on the Japanese Quality Movement. [and] Invited Reaction: Comments on Strategic National Initiatives: Lessons from the Management Training Program of Japan.

ERIC Educational Resources Information Center

Robinson, Alan G.; And Others

1995-01-01

Robinson and Stern describe the Management Training Program introduced by the U.S. Air Force in postwar Japan and its effect on Japanese industry. Roberts compares it with U.S. Training within Industries. Umetani comments that the discussion would have been more convincing had its relationship with other Japanese training programs been addressed.…

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

Training programs at DOE facilities should prepare personnel to safely and efficiently operate and maintain the facilities in accordance with DOE requirements. This guide presents good practices for a systematic approach to on-the-job training (OJT) and OJT programs and should be used in conjunction with DOE Training Program Handbook: A Systematic Approach to Training, and with the DOE Handbook entitled Alternative Systematic Approaches to Training to develop performance-based OJT programs. DOE contractors may also use this guide to modify existing OJT programs that do not meet the systematic approach to training (SAT) objectives.

Rehabilitation after cell transplantation for cartilage defects.

PubMed

Deszczynski, J; Slynarski, K

2006-01-01

Rehabilitation is a key element of successful treatment of cartilage defects with cell transplantation. The process of graft maturation takes approximately 18 months and cannot be accelerated, but requires carefully introduced steps leading to early recovery of joint function. Rehabilitation starts at 8 hours after surgery with the continuous passive motion (CPM) exercises and physiotherapy. For the first 6 weeks, patients continue with CPM in the range of 0 degrees to 45 degrees for femoral and tibial defects and 0 degrees to 30 degrees for patellofemoral joint reconstruction. Isometric muscle training and scar manual therapy are introduced. Patients are allowed to weight-bear as tolerated from the second week after surgery. After this initial phase, from 6 to 8 weeks after surgery, rehabilitation is accelerated with increased load-bearing and progressive range of motion to full flexion. Usually patients are able to walk without crutches in this time. Proprioceptive training is introduced with the advance of pain-free full range of motion and no discomfort with full weight-bearing. At 6 months after surgery, most patients recover joint function, making it possible for them to return to daily living activities. However, they need to continue with muscle, proprioceptive, and sports-specific rehabilitation exercises. The rehabilitation process is complicated, requiring close cooperation between the patient and surgeon-physiotherapist team to understand the symptoms and address them in a timely fashion.

Air Transport and Travel Industry Training Board

ERIC Educational Resources Information Center

Industrial Training Journal, 1974

1974-01-01

Seeing its role as one of stimulating, guiding, and coordinating training activities rather than providing central training facilities, three programs have been developed by the Air Transport and Travel Industry Training Board: (1) an occupational program, (2) a company program, and (3) an industry program. (MW)

Metallurgical Analysis of Ball Bearing Seized During Operation

NASA Astrophysics Data System (ADS)

Jha, Abhay K.; Swathi Kiranmayee, M.; Ramesh Narayanan, P.; Sreekumar, K.; Sinha, P. P.

2012-06-01

440C stainless steel of martensitic grade is being extensively used for bearing application because of its high wear and corrosion resistance. This alloy steel with 1 wt.% C along with 17 wt.% Cr, 1 wt.% Mn and up to 0.75 wt.% Mo has a number of primary carbides, which provide high hardness and good wear resistance. Owing to its unique performance characteristic, this steel finds a number of applications in space program. One such application is bearing used in booster pump assembly of propulsion system. During one of the ground tests of propulsion system, booster pump bearing seized operation after performing its partial intended function. The bearing was removed from the assembly and cut open. The ball and outer caging were analyzed using metallographic techniques and compared with another bearing taken from the fresh stock. Study indicated that ball as well as outer caging experienced exposure to high temperature and resulted in phase transformation. This article highlights the details of investigations carried out.

Non-Mutually Exclusive Deep Neural Network Classifier for Combined Modes of Bearing Fault Diagnosis.

PubMed

Duong, Bach Phi; Kim, Jong-Myon

2018-04-07

The simultaneous occurrence of various types of defects in bearings makes their diagnosis more challenging owing to the resultant complexity of the constituent parts of the acoustic emission (AE) signals. To address this issue, a new approach is proposed in this paper for the detection of multiple combined faults in bearings. The proposed methodology uses a deep neural network (DNN) architecture to effectively diagnose the combined defects. The DNN structure is based on the stacked denoising autoencoder non-mutually exclusive classifier (NMEC) method for combined modes. The NMEC-DNN is trained using data for a single fault and it classifies both single faults and multiple combined faults. The results of experiments conducted on AE data collected through an experimental test-bed demonstrate that the DNN achieves good classification performance with a maximum accuracy of 95%. The proposed method is compared with a multi-class classifier based on support vector machines (SVMs). The NMEC-DNN yields better diagnostic performance in comparison to the multi-class classifier based on SVM. The NMEC-DNN reduces the number of necessary data collections and improves the bearing fault diagnosis performance.

42 CFR 51.27 - Training.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Training. 51.27 Section 51.27 Public Health PUBLIC... Training. A P&A system shall provide training for program staff, and may also provide training for...)(1) Training of program staff to work with family members of clients served by the program where the...

Evaluating Job Training Programs in the United States: Evidence and Explanations. Technical Assistance Report.

ERIC Educational Resources Information Center

Grubb, W. Norton

Recent studies of the effectiveness of the following types of job training programs were reviewed: mainstream job training (Comprehensive Employment and Training Act and Job Training Partnership Act programs); welfare-to-work; experimental; job training for specific population groups; and specific services. Special attention was paid to the…

25 CFR 26.29 - What is the scope of the Job Training Program?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 1 2013-04-01 2013-04-01 false What is the scope of the Job Training Program? 26.29 Section 26.29 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR HUMAN SERVICES JOB PLACEMENT AND TRAINING PROGRAM Training Services § 26.29 What is the scope of the Job Training Program? A...

25 CFR 26.29 - What is the scope of the Job Training Program?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 1 2012-04-01 2011-04-01 true What is the scope of the Job Training Program? 26.29 Section 26.29 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR HUMAN SERVICES JOB PLACEMENT AND TRAINING PROGRAM Training Services § 26.29 What is the scope of the Job Training Program? A...

25 CFR 26.29 - What is the scope of the Job Training Program?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 1 2014-04-01 2014-04-01 false What is the scope of the Job Training Program? 26.29 Section 26.29 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR HUMAN SERVICES JOB PLACEMENT AND TRAINING PROGRAM Training Services § 26.29 What is the scope of the Job Training Program? A...

25 CFR 26.29 - What is the scope of the Job Training Program?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 1 2011-04-01 2011-04-01 false What is the scope of the Job Training Program? 26.29 Section 26.29 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR HUMAN SERVICES JOB PLACEMENT AND TRAINING PROGRAM Training Services § 26.29 What is the scope of the Job Training Program? A...

25 CFR 26.29 - What is the scope of the Job Training Program?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false What is the scope of the Job Training Program? 26.29 Section 26.29 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR HUMAN SERVICES JOB PLACEMENT AND TRAINING PROGRAM Training Services § 26.29 What is the scope of the Job Training Program? A...

25 CFR 26.3 - What is the purpose of the Job Placement and Training Program?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false What is the purpose of the Job Placement and Training... PLACEMENT AND TRAINING PROGRAM General Applicability § 26.3 What is the purpose of the Job Placement and Training Program? The purpose of the Job Placement and Training Program is to assist eligible applicants to...

Feasibility Study of a Rotorcraft Health and Usage Monitoring System (HUMS): Results of Operator's Evaluation

NASA Technical Reports Server (NTRS)

Romero, Raylund; Summers, Harold; Cronkhite, James

1996-01-01

The objective was to evaluate the feasibility of a state-of-the-art health and usage monitoring system (HUMS) to provide monitoring of critical mechanical systems on the helicopter, including motors, drive train, engines, and life-limited components. The implementation of HUMS and cost integration with current maintenance procedures was assessed from the operator's viewpoint in order to achieve expected benefits from these systems, such as enhanced safety, reduced maintenance cost, and increased availability. An operational HUMS that was installed and operated under an independent flight trial program was used as a basis for this study. The HUMS equipment and software were commercially available. Based on the results of the feasibility study, the HUMS used in the flight trial program generally demonstrated a high level of reliability in monitoring the rotor system, engines, drive train, and life-limited components. The system acted as a sentinel to warn of impending failures. A worn tail rotor pitch bearing was detected by HUMS, which had the capability for self testing to diagnose system and sensor faults. Examples of potential payback to the operator with HUMS were identified, including reduced insurance cost through enhanced safety, lower operating costs derived from maintenance credits, increased aircraft availability, and improved operating efficiency. The interfacing of HUMS with current operational procedures was assessed to require only minimal revisions to the operator's maintenance manuals. Finally the success in realizing the potential benefits from HUMS technology was found to depend on the operator, helicopter manufacturer, regulator (FAA), and HUMS supplier working together.

Guidelines for postdoctoral training in rehabilitation psychology.

PubMed

Stiers, William; Hanson, Stephanie; Turner, Aaron P; Stucky, Kirk; Barisa, Mark; Brownsberger, Mary; Van Tubbergen, Marie; Ashman, Teresa; Kuemmel, Angela

2012-11-01

This article describes the methods and results of a national conference that was held to (1) develop consensus guidelines about the structure and process of rehabilitation psychology postdoctoral training programs and (2) create a Council of Rehabilitation Psychology Postdoctoral Training Programs to promote training programs' abilities to implement the guidelines and to formally recognize programs in compliance with the guidelines. Forty-six conference participants were chosen to include important stakeholders in rehabilitation psychology, representatives of rehabilitation psychology training and practice communities, representatives of psychology accreditation and certification bodies, and persons involved in medical education practice and research. Consensus guidelines were developed for rehabilitation psychology postdoctoral training program structure and process and for establishing the Council of Rehabilitation Psychology Postdoctoral Training Programs. The Conference developed aspirational guidelines for postdoctoral education and training programs in applied rehabilitation psychology and established a Council of Rehabilitation Psychology Postdoctoral Training Programs as a means of promoting their adoption by training programs. These efforts are designed to promote quality, consistency, and excellence in the education and training of rehabilitation psychology practitioners and to promote competence in their practice. It is hoped that these efforts will stimulate discussion, assist in the development of improved teaching and evaluation methods, lead to interesting research questions, and generally facilitate the continued systematic development of the profession of rehabilitation psychology. PsycINFO Database Record (c) 2012 APA, all rights reserved

Training of Personnel to Work with Young Children in India.

ERIC Educational Resources Information Center

Kahalakdina, M.

1984-01-01

Describes recruitment procedures for child care workers in India. Includes a description of training programs, training needs and approaches, and curriculum and training procedures. Monitoring and evaluation of child welfare programs are discussed. Appendices include descriptions of and norms for training programs. (AS)

Helping to Meet Today's Energy Demands: Natural Gas Technician Training in Algeria

ERIC Educational Resources Information Center

Dutton, Bernard

1976-01-01

The training program, located in Arzew, Algeria, is designed to train technicians in all phases of gas technology. The program provides classroom instruction, on-the-job training, and language instruction. The different phases involved in the training program are described. (EC)

49 CFR 236.1041 - Training and qualification program, general.

Code of Federal Regulations, 2010 CFR

2010-10-01

... INSTALLATION, INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Positive Train Control Systems § 236.1041 Training and qualification program, general. (a) Training program...-critical elements of the railroad's PTC systems, including central office, wayside, or onboard subsystems...

Rotor-to-stator rub vibration in centrifugal compressor

NASA Technical Reports Server (NTRS)

Gao, J. J.; Qi, Q. M.

1985-01-01

One example of excessive vibration encountered during loading of a centrifugal compressor train (H type compressor with HP casing) is discussed. An investigation was made of the effects of the dynamic load on the bearing stiffness and the rotor-bearing system critical speed. The high vibration occurred at a "threshold load," but the machine didn't run smoothly due to rubs even when it had passed through the threshold load. The acquisition and discussion of the data taken in the field as well as a description of the case history which utilizes background information to identify the malfunction conditions is presented. The analysis shows that the failures, including full reverse precession rub and exact one half subharmonic vibration, were caused by the oversize bearings and displacement of the rotor center due to foundation deformation and misalignment between gear shafts, etc. The corrective actions taken to alleviate excessive vibration and the problems which remain to be solved are also presented.

34 CFR 385.1 - What is the Rehabilitation Training program?

Code of Federal Regulations, 2012 CFR

2012-07-01

... § 385.1 What is the Rehabilitation Training program? (a) The Rehabilitation Training program is designed... CFR part 386). (2) Experimental and Innovative Training (34 CFR part 387). (3) State Vocational...

34 CFR 385.1 - What is the Rehabilitation Training program?

Code of Federal Regulations, 2013 CFR

2013-07-01

... § 385.1 What is the Rehabilitation Training program? (a) The Rehabilitation Training program is designed... CFR part 386). (2) Experimental and Innovative Training (34 CFR part 387). (3) State Vocational...

Clinician scientist training program: a proposal for training medical students in clinical research.

PubMed

Mark, A L; Kelch, R P

2001-11-01

There is national alarm about a decline in the number of clinician scientists. Most of the proposed solutions have focused on housestaff and junior faculty. We propose a new national program for training medical students in clinical research. This program, coined "Clinician Scientist Training Program" (CSTP), would consist of a combined degree program in medicine (MD) and clinical research (eg, masters in translational research or masters in clinical epidemiology). Students could enroll in the program at any stage during medical school. After 3 years of medical school, students would spend at least 2 years in a combined didactic and mentored clinical research training program and then complete medical school. Students could elect to pursue more prolonged clinical research training toward a combined PhD and MD. The CSTP is designed to meet six critical challenges: 1) engage students early in clinical research training; 2) provide a didactic clinical research curriculum; 3) expose students to several years of mentored clinical research training; 4) promote debt prevention by providing tuition payments during medical education and a stipend during clinical research training; 5) facilitate prolonged exposure to a community of peers and mentors in a program with national and institutional identity and respect; and 6) permit enrollment in the program as students enter medical school or at any stage during medical school. If the success of the Medical Scientist Training Program in training medical students in basic research is a guide, the CSTP could become a linchpin for training future generations of clinician scientists.

Training teachers in generalized writing of behavior modification programs for multihandicapped deaf children.

PubMed

Hundert, J

1982-01-01

In contrast to previous studies where teachers were instructed how to implement behavior modification programs designed by an experimenter, teachers in the present experiment were taught how to write as well as implement behavior modification programs. The generalized effects of two training conditions on teacher and pupil behaviors were assessed by a multiple baseline design where, following baseline, two teachers of multi-handicapped deaf children were taught to set objectives and measure pupil performance (measurement training), Later, through a training manual, they learned a general problem-solving approach to writing behavior modification programs (programming training). After both training conditions, experimenter feedback was given for teachers' application of training to a target behavior for one pupil and generalization was measured across target behaviors for the same pupil and across pupils. It was found that measurement training had little general effect on either teacher behavior or pupil behavior. However, after programming training, teachers increased their program writing and correct use of behavior modification procedures and generalized this training across pupils and target behaviors. Along with these effects, there was improvement in pupil behaviors. Possible explanation for generalized effects of teacher training were considered.

The Efficacy of Stuttering Measurement Training: Evaluating Two Training Programs

PubMed Central

Bainbridge, Lauren A.; Stavros, Candace; Ebrahimian, Mineh; Wang, Yuedong

2015-01-01

Purpose Two stuttering measurement training programs currently used for training clinicians were evaluated for their efficacy in improving the accuracy of total stuttering event counting. Method Four groups, each with 12 randomly allocated participants, completed a pretest–posttest design training study. They were evaluated by their counts of stuttering events on eight 3-min audiovisual speech samples from adults and children who stutter. Stuttering judgment training involved use of either the Stuttering Measurement System (SMS), Stuttering Measurement Assessment and Training (SMAAT) programs, or no training. To test for the reliability of any training effect, SMS training was repeated with the 4th group. Results Both SMS-trained groups produced approximately 34% improvement, significantly better than no training or the SMAAT program. The SMAAT program produced a mixed result. Conclusions The SMS program was shown to produce a “medium” effect size improvement in the accuracy of stuttering event counts, and this improvement was almost perfectly replicated in a 2nd group. Half of the SMAAT judges produced a 36% improvement in accuracy, but the other half showed no improvement. Additional studies are needed to demonstrate the durability of the reported improvements, but these positive effects justify the importance of stuttering measurement training. PMID:25629956

The efficacy of stuttering measurement training: evaluating two training programs.

PubMed

Bainbridge, Lauren A; Stavros, Candace; Ebrahimian, Mineh; Wang, Yuedong; Ingham, Roger J

2015-04-01

Two stuttering measurement training programs currently used for training clinicians were evaluated for their efficacy in improving the accuracy of total stuttering event counting. Four groups, each with 12 randomly allocated participants, completed a pretest-posttest design training study. They were evaluated by their counts of stuttering events on eight 3-min audiovisual speech samples from adults and children who stutter. Stuttering judgment training involved use of either the Stuttering Measurement System (SMS), Stuttering Measurement Assessment and Training (SMAAT) programs, or no training. To test for the reliability of any training effect, SMS training was repeated with the 4th group. Both SMS-trained groups produced approximately 34% improvement, significantly better than no training or the SMAAT program. The SMAAT program produced a mixed result. The SMS program was shown to produce a "medium" effect size improvement in the accuracy of stuttering event counts, and this improvement was almost perfectly replicated in a 2nd group. Half of the SMAAT judges produced a 36% improvement in accuracy, but the other half showed no improvement. Additional studies are needed to demonstrate the durability of the reported improvements, but these positive effects justify the importance of stuttering measurement training.

Effects of a 12-week Tai Chi Chuan program versus a balance training program on postural control and walking ability in older people.

PubMed

Lelard, Thierry; Doutrellot, Pierre-Louis; David, Pascal; Ahmaidi, Said

2010-01-01

Lelard T, Doutrellot P-L, David P, Ahmaidi S. Effects of a 12-week Tai Chi Chuan program versus a balance training program on postural control and walking ability in older people. To compare the respective effects of 2 balance training programs: a Tai Chi (TC) program and a balance training program on static postural control and walking ability. Randomized controlled trial. General community. Older subjects (N=28) participated in the study. The TC group (n=14; mean age +/- SD, 76.8+/-5.1y) and the balance training group (n=14; 77.0+/-4.5y) were both trained for 12 weeks. Static postural control was assessed via measurement of center of pressure sway under eyes open (EO) and eyes closed (EC) conditions. Walking speed over a 10-meter course was also assessed. After the 12-week training period, there were no significant differences in walking speed or postural parameters in either the EO or EC conditions for the TC and balance training groups. Performance in the EC condition was lower than in the EO condition in pretest and posttest for the balance training and TC groups. The Romberg quotient (EO/EC ratio) was significantly higher after the balance training program than the TC program (P<.05). We cannot conclude that the balance training program has better effects than the TC program on postural control or walking ability. None of the outcome measures showed significant change posttraining in either the TC or the balance training groups. However, the differences described in the Romberg quotient after the training period between the TC and the balance training groups suggest that TC should be helpful to limit the deleterious effects of eye closure on postural balance. Copyright (c) 2010 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

30 CFR 77.107 - Training programs.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Training programs. 77.107 Section 77.107... and Certified Persons § 77.107 Training programs. Every operator of a coal mine shall provide a program, approved by the Secretary, of training and retraining both qualified and certified persons needed...

30 CFR 77.107 - Training programs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Training programs. 77.107 Section 77.107... and Certified Persons § 77.107 Training programs. Every operator of a coal mine shall provide a program, approved by the Secretary, of training and retraining both qualified and certified persons needed...

34 CFR 387.1 - What is the Experimental and Innovative Training Program?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 34 Education 2 2014-07-01 2013-07-01 true What is the Experimental and Innovative Training Program...) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION EXPERIMENTAL AND INNOVATIVE TRAINING General § 387.1 What is the Experimental and Innovative Training Program? This program is...

34 CFR 387.1 - What is the Experimental and Innovative Training Program?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 2 2011-07-01 2010-07-01 true What is the Experimental and Innovative Training Program...) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION EXPERIMENTAL AND INNOVATIVE TRAINING General § 387.1 What is the Experimental and Innovative Training Program? This program is...

Organized Hypocrisy in EFL Teacher Training Programs

ERIC Educational Resources Information Center

Karim, Abdul; Mohamed, Abdul Rashid; Ismail, Shaik Abdul Malik Mohamed; Rahman, Mohammad Mosiur

2018-01-01

Embracing the reasons for the failure of donor-sponsored English-teacher training programs is very critical since it precedes the revisions, improvements and quality assurance for the futuristic training programs. Ideating such philosophy, the current study concerns the blatant penetration with regard to the donor-aided training programs in…

30 CFR 77.1706 - First aid training program; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false First aid training program; minimum... OF UNDERGROUND COAL MINES Miscellaneous § 77.1706 First aid training program; minimum requirements. (a) All first aid training programs required under the provisions of §§ 77.1703 and 77.1704 shall...

Re-Employment Training: Evaluation of the Oakland University RECAP/JETS Program.

ERIC Educational Resources Information Center

Ramey, Luellen

This document provides a description and evaluation of the RECAP (Re-employment Career Planning)/JETS (Job, Education/Training, Selection) program, a cooperative re-employment training program for displaced automobile industry workers in Michigan. Following the brief introduction, program development and pre-training preparation are discussed,…

Fracturing Behavior of Methane-Hydrate-Bearing Sediment

NASA Astrophysics Data System (ADS)

Konno, Y.; Jin, Y.; Yoneda, J.; Uchiumi, T.; Shinjou, K.; Nagao, J.

2016-12-01

As a part of a Japanese national hydrate research program (MH21, funded by the Ministry of Economy, Trade, and Industry), we performed laboratory experiments of hydraulic fracturing in methane-hydrate-bearing sediment. Distilled water was injected into methane-hydrate-bearing sand which was artificially made in a tri-axial pressure cell. X-ray computed tomography revealed that tensile failure was occurred after a rapid drop in the injection pressure. It was found that generated fractures cause a significant increase in the effective water permeability of hydrate-bearing sand. The result contributes fundamental understanding of the accumulation mechanism of gas hydrates in sediments and shows that hydraulic fracturing is one of promising enhanced recovery methods for low-permeable gas hydrate reservoirs.

Electrician Cluster, STEP Training Plan. Skills Training and Education Program.

ERIC Educational Resources Information Center

Alabama State Dept. of Postsecondary Education, Montgomery.

This guide is a training plan for the electrical skills cluster of the Skills Training and Education Program (STEP), an open-entry, open-exit program funded by the Job Training Partnership Act (JTPA). In the STEP training plan, each task has its own lesson plan guide. This manual contains the following information: definitions, instructions for…

Clerical Cluster, STEP Training Plan. Skills Training and Education Program.

ERIC Educational Resources Information Center

Alabama State Dept. of Postsecondary Education, Montgomery.

This guide is a training plan for the clerical skills cluster of the Skills Training and Education Program (STEP), an open-entry, open-exit program funded by the Job Training Partnership Act (JTPA). In the STEP training plan, each task has its own lesson plan guide. This manual contains the following information: definitions, instructions for…

A rehabilitation tool for functional balance using altered gravity and virtual reality.

PubMed

Oddsson, Lars I E; Karlsson, Robin; Konrad, Janusz; Ince, Serdar; Williams, Steve R; Zemkova, Erika

2007-07-10

There is a need for effective and early functional rehabilitation of patients with gait and balance problems including those with spinal cord injury, neurological diseases and recovering from hip fractures, a common consequence of falls especially in the elderly population. Gait training in these patients using partial body weight support (BWS) on a treadmill, a technique that involves unloading the subject through a harness, improves walking better than training with full weight bearing. One problem with this technique not commonly acknowledged is that the harness provides external support that essentially eliminates associated postural adjustments (APAs) required for independent gait. We have developed a device to address this issue and conducted a training study for proof of concept of efficacy. We present a tool that can enhance the concept of BWS training by allowing natural APAs to occur mediolaterally. While in a supine position in a 90 deg tilted environment built around a modified hospital bed, subjects wear a backpack frame that is freely moving on air-bearings (cf. puck on an air hockey table) and attached through a cable to a pneumatic cylinder that provides a load that can be set to emulate various G-like loads. Veridical visual input is provided through two 3-D automultiscopic displays that allow glasses free 3-D vision representing a virtual surrounding environment that may be acquired from sites chosen by the patient. Two groups of 12 healthy subjects were exposed to either strength training alone or a combination of strength and balance training in such a tilted environment over a period of four weeks. Isokinetic strength measured during upright squat extension improved similarly in both groups. Measures of balance assessed in upright showed statistically significant improvements only when balance was part of the training in the tilted environment. Postural measures indicated less reliance on visual and/or increased use of somatosensory cues after training. Upright balance function can be improved following balance specific training performed in a supine position in an environment providing the perception of an upright position with respect to gravity. Future studies will implement this concept in patients.

45 CFR 1306.23 - Training.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 45 Public Welfare 4 2011-10-01 2011-10-01 false Training. 1306.23 Section 1306.23 Public Welfare... STAFFING REQUIREMENTS AND PROGRAM OPTIONS Head Start Program Staffing Requirements § 1306.23 Training. (a) Head Start grantees must provide pre-service training and in-service training opportunities to program...

An Innovative Instrument Flight Training Program.

ERIC Educational Resources Information Center

Caro, Paul W.

An innovative flight training program, its development, and initial administration are described. The program involves use of a commercially available training device in a twin-engine transition and instrument training course. Principal features of the training include redefinition of the flight instructor's role, and incentive award system,…

Laughing Bear.

ERIC Educational Resources Information Center

Seeds, Michael A.; Seeds, Kathryn Anne

1983-01-01

Provided is a complete listing (Applesoft Basic) for a children's spelling program. The listing includes a machine language music utility that plays short tunes and uses the Apple's two hi-res screens for animation. Also included is a program that allows pictures to be drawn and saved to animate other programs. (JN)

Thermohydrodynamic Analysis of Cryogenic Liquid Turbulent Flow Fluid Film Bearings

NASA Technical Reports Server (NTRS)

SanAndres, Luis

1996-01-01

Computational programs developed for the thermal analysis of tilting and flexure-pad hybrid bearings, and the unsteady flow and transient response of a point mass rotor supported on fluid film bearings are described. The motion of a cryogenic liquid on the thin film annular region of a fluid film bearing is described by a set of mass and momentum conservation, and energy transport equations for the turbulent bulk-flow velocities and pressure, and accompanied by thermophysical state equations for evaluation of the fluid material properties. Zeroth-order equations describe the fluid flow field for a journal static equilibrium position, while first-order (linear) equations govern the fluid flow for small amplitude-journal center translational motions. Solution to the zeroth-order flow field equations provides the bearing flow rate, load capacity, drag torque and temperature rise. Solution to the first-order equations determines the rotordynamic force coefficients due to journal radial motions.

Roller bearing geometry design

NASA Technical Reports Server (NTRS)

Savage, M.; Pinkston, B. H. W.

1976-01-01

A theory of kinematic stabilization of rolling cylinders is extended and applied to the design of cylindrical roller bearings. The kinematic stabilization mechanism puts a reverse skew into the rolling elements by changing the roller taper. Twelve basic bearing modification designs are identified amd modeled. Four have single transverse convex curvature in their rollers while eight have rollers which have compound transverse curvature made up of a central cylindrical band surrounded by symmetric bands with slope and transverse curvature. The bearing designs are modeled for restoring torque per unit axial displacement, contact stress capacity, and contact area including dynamic loading, misalignment sensitivity and roller proportion. Design programs are available which size the single transverse curvature roller designs for a series of roller slopes and load separations and which design the compound roller bearings for a series of slopes and transverse radii of curvature. The compound rollers are proportioned to have equal contact stresses and minimum size. Design examples are also given.

Orbital transfer vehicle oxygen turbopump technology. Volume 3: Hot oxygen testing

NASA Technical Reports Server (NTRS)

Urke, Robert L.

1992-01-01

This report covers the work done in preparation for a liquid oxygen rocket engine turbopump test utilizing high pressure hot oxygen gas for the turbine drive. The turbopump (TPA) is designed to operate with 400 F oxygen turbine drive gas. The goal of this test program was to demonstrate the successful operation of the TPA under simulated engine conditions including the hot oxygen turbine drive. This testing follows a highly successful series of tests pumping liquid oxygen with gaseous nitrogen as the turbine drive gas. That testing included starting of the TPA with no assist to the hydrostatic bearing. The bearing start entailed a rubbing start until the pump generated enough pressure to support the bearing. The articulating, self-centering hydrostatic bearing exhibited no bearing load or stability problems. The TPA was refurbished for the hot gas drive tests and facility work was begun, but unfortunately funding cuts prohibited the actual testing.

Training the Sales Neophyte

ERIC Educational Resources Information Center

Harris, Clyde E., Jr.

1975-01-01

The article reappraises initial sales training and presents a program emphasizing objectives, responsibility for training, program content, and teaching techniques. Formal Initial Responsive Sales Training System (FIRSTS) is the name of the program explored and evaluated. (Author/MW)

Building capacity for water, sanitation, and hygiene programming: Training evaluation theory applied to CLTS management training in Kenya.

PubMed

Crocker, Jonny; Shields, Katherine F; Venkataramanan, Vidya; Saywell, Darren; Bartram, Jamie

2016-10-01

Training and capacity building are long established critical components of global water, sanitation, and hygiene (WaSH) policies, strategies, and programs. Expanding capacity building support for WaSH in developing countries is one of the targets of the Sustainable Development Goals. There are many training evaluation methods and tools available. However, training evaluations in WaSH have been infrequent, have often not utilized these methods and tools, and have lacked rigor. We developed a conceptual framework for evaluating training in WaSH by reviewing and adapting concepts from literature. Our framework includes three target outcomes: learning, individual performance, and improved programming; and two sets of influences: trainee and context factors. We applied the framework to evaluate a seven-month community-led total sanitation (CLTS) management training program delivered to 42 government officials in Kenya from September 2013 to May 2014. Trainees were given a pre-training questionnaire and were interviewed at two weeks and seven months after initial training. We qualitatively analyzed the data using our conceptual framework. The training program resulted in trainees learning the CLTS process and new skills, and improving their individual performance through application of advocacy, partnership, and supervision soft skills. The link from trainees' performance to improved programming was constrained by resource limitations and pre-existing rigidity of trainees' organizations. Training-over-time enhanced outcomes and enabled trainees to overcome constraints in their work. Training in soft skills is relevant to managing public health programs beyond WaSH. We make recommendations on how training programs can be targeted and adapted to improve outcomes. Our conceptual framework can be used as a tool both for planning and evaluating training programs in WaSH. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Quality assurance in postgraduate pathology training the Dutch way: regular assessment, monitoring of training programs but no end of training examination.

PubMed

van der Valk, Paul

2016-01-01

It might seem self-evident that in the transition from a supervised trainee to an independent professional who is no longer supervised, formal assessment of whether the trainee knows his/her trade well enough to function independently is necessary. This would then constitute an end of training examination. Such examinations are practiced in several countries but a rather heterogeneous situation exists in the EU countries. In the Netherlands, the training program is not concluded by a summative examination and reasons behind this situation are discussed. Quality assurance of postgraduate medical training in the Netherlands has been developed along two tracks: (1) not a single testing moment but continuous evaluation of the performance of the trainee in 'real time' situations and (2) monitoring of the quality of the offered training program through regular site-visits. Regular (monthly and/or yearly) evaluations should be part of every self-respecting training program. In the Netherlands, these evaluations are formative only: their intention is to provide the trainee a tool by which he or she can see whether they are on track with their training schedule. In the system in the Netherlands, regular site-visits to training programs constitute a crucial element of quality assurance of postgraduate training. During the site-visit, the position and perceptions of the trainee are key elements. The perception by the trainee of the training program, the institution (or department) offering the training program, and the professionals involved in the training program is explicitly solicited and systematically assessed. With this two-tiered approach high-quality postgraduate training is assured without the need for an end of training examination.

Second International Symposium on Magnetic Suspension Technology, part 2

NASA Technical Reports Server (NTRS)

Groom, Nelson J. (Editor); Britcher, Colin P. (Editor)

1994-01-01

In order to examine the state of technology of all areas of magnetic suspension and to review related recent developments in sensors and controls approaches, superconducting magnet technology, and design/implementation practices, the 2nd International Symposium on Magnetic Suspension Technology was held at the Westin Hotel in Seattle, WA, on 11-13 Aug. 1993. The symposium included 18 technical sessions in which 44 papers were presented. The technical sessions covered the areas of bearings, bearing modelling, controls, vibration isolation, micromachines, superconductivity, wind tunnel magnetic suspension systems, magnetically levitated trains (MAGLEV), rotating machinery and energy storage, and applications. A list of attendees appears at the end of the document.

The need for improved dermoscopy training in residency: a survey of US dermatology residents and program directors

PubMed Central

Patel, Parth; Khanna, Sarika; McLellan, Beth; Krishnamurthy, Karthik

2017-01-01

Background Inadequate dermoscopy training represents a major barrier to proper dermoscopy use. Objective To better understand the status of dermoscopy training in US residency programs. Methods A survey was sent to 417 dermatology residents and 118 program directors of dermatology residency programs. Results Comparing different training times for the same training type, residents with 1–10 hours of dedicated training had similar confidence using dermoscopy in general (p = 1.000) and satisfaction with training (p = .3224) than residents with >10 hours of dedicated training. Comparing similar training times for different training types, residents with 1–10 hours of dedicated training had significantly increased confidence using dermoscopy in general (p = .0105) and satisfaction with training (p = .0066) than residents with 1–10 hours of only bedside training. Lastly, residents with 1–10 hours of dedicated training and >10 hours of dedicated training had significantly increased confidence using dermoscopy in general (p = .0002, p = .2471) and satisfaction with training (p <.0001, p < .0001) than residents with no dermoscopy training at all. Conclusions Dermoscopy training in residency should include formal dermoscopy training that is overseen by the program director and is possibly supplemented by outside dermoscopy training. PMID:28515987

Monetary incentives to reinforce engagement and achievement in a job-skills training program for homeless, unemployed adults.

PubMed

Koffarnus, Mikhail N; Wong, Conrad J; Fingerhood, Michael; Svikis, Dace S; Bigelow, George E; Silverman, Kenneth

2013-01-01

The current study examined whether monetary incentives could increase engagement and achievement in a job-skills training program for unemployed, homeless, alcohol-dependent adults. Participants (n=124) were randomized to a no-reinforcement group (n=39), during which access to the training program was provided but no incentives were given; a training reinforcement group (n=42), during which incentives were contingent on attendance and performance; or an abstinence and training reinforcement group (n=43), during which incentives were contingent on attendance and performance, but access was granted only if participants demonstrated abstinence from alcohol. abstinence and training reinforcement and training reinforcement participants advanced further in training and attended more hours than no-reinforcement participants. Monetary incentives were effective in promoting engagement and achievement in a job-skills training program for individuals who often do not take advantage of training programs. © Society for the Experimental Analysis of Behavior.

Enhancing the application of effective malaria interventions in Africa through training.

PubMed

Ijumba, Jasper N; Kitua, Andrew Y

2004-08-01

Africa bears more than 90% of the entire global malaria disease burden. Surprisingly, even with the current renewed interest in malaria prevention and control and the enabling environment resulting from the Roll Back Malaria initiative and the political commitment made by the African Presidents at the Abuja Summit, there are still no significant initiatives for strengthening capacity for malaria control through training within the African continent itself. The Center for Enhancement of Effective Malaria Interventions (CEEMI) has been established in Dar es Salaam, Tanzania for results-oriented training. It is intended to provide the needed skills for identifying and solving malaria control problems and providing incentives to malaria control workers in their work performance. The intention is to produce implementers with leadership skills for planning and managing malaria control activities and who can use strategic thinking in improving their work performance. To sustain political commitment and support and to sensitize the community on malaria issues, the CEEMI, in collaboration with the Ministry of Health (National Malaria Control Program), the Institute of Journalism and Mass Communication of the University of Dar es Salaam, and the Commonwealth Broadcasting Association have already conducted malaria seminars for Tanzanian Members of Parliament and journalists from Kenya, Malawi, Tanzania, and Uganda. Additionally, a diploma course in health communication is being developed for journalists and for the same purpose. Also being developed is a training module for "Council Malaria Focal Person." This is aimed at complementing the Roll Back Malaria initiative to meet the Abuja targets of reducing morbidity and mortality due to malaria by 50% by 2010. Copyright 2004 The American Society of Tropical Medicine and Hygiene