Simulation for Teaching Orthopaedic Residents in a Competency-based Curriculum: Do the Benefits Justify the Increased Costs?

PubMed

Nousiainen, Markku T; McQueen, Sydney A; Ferguson, Peter; Alman, Benjamin; Kraemer, William; Safir, Oleg; Reznick, Richard; Sonnadara, Ranil

2016-04-01

Although simulation-based training is becoming widespread in surgical education and research supports its use, one major limitation is cost. Until now, little has been published on the costs of simulation in residency training. At the University of Toronto, a novel competency-based curriculum in orthopaedic surgery has been implemented for training selected residents, which makes extensive use of simulation. Despite the benefits of this intensive approach to simulation, there is a need to consider its financial implications and demands on faculty time. This study presents a cost and faculty work-hours analysis of implementing simulation as a teaching and evaluation tool in the University of Toronto's novel competency-based curriculum program compared with the historic costs of using simulation in the residency training program. All invoices for simulation training were reviewed to determine the financial costs before and after implementation of the competency-based curriculum. Invoice items included costs for cadavers, artificial models, skills laboratory labor, associated materials, and standardized patients. Costs related to the surgical skills laboratory rental fees and orthopaedic implants were waived as a result of special arrangements with the skills laboratory and implant vendors. Although faculty time was not reimbursed, faculty hours dedicated to simulation were also evaluated. The academic year of 2008 to 2009 was chosen to represent an academic year that preceded the introduction of the competency-based curriculum. During this year, 12 residents used simulation for teaching. The academic year of 2010 to 2011 was chosen to represent an academic year when the competency-based curriculum training program was functioning parallel but separate from the regular stream of training. In this year, six residents used simulation for teaching and assessment. The academic year of 2012 to 2013 was chosen to represent an academic year when simulation was used equally among the competency-based curriculum and regular stream residents for teaching (60 residents) and among 14 competency-based curriculum residents and 21 regular stream residents for assessment. The total costs of using simulation to teach and assess all residents in the competency-based curriculum and regular stream programs (academic year 2012-2013) (CDN 155,750, USD 158,050) were approximately 15 times higher than the cost of using simulation to teach residents before the implementation of the competency-based curriculum (academic year 2008-2009) (CDN 10,090, USD 11,140). The number of hours spent teaching and assessing trainees increased from 96 to 317 hours during this period, representing a threefold increase. Although the financial costs and time demands on faculty in running the simulation program in the new competency-based curriculum at the University of Toronto have been substantial, augmented learner and trainer satisfaction has been accompanied by direct evidence of improved and more efficient learning outcomes. The higher costs and demands on faculty time associated with implementing simulation for teaching and assessment must be considered when it is used to enhance surgical training.

Crisis Management Simulation: Establishing a Dual Neurosurgery and Anesthesia Training Experience.

PubMed

Ciporen, Jeremy; Gillham, Haley; Noles, Michele; Dillman, Dawn; Baskerville, Mark; Haley, Caleb; Spight, Donn; Turner, Ryan C; Lucke-Wold, Brandon P

2018-01-01

Simulation training has been shown to be an effective teaching tool. Learner management of an intraoperative crisis such as a major cerebrovascular bleed requires effective teamwork, communication, and implementation of key skill sets at appropriate time points. This study establishes a first of a kind simulation experience in a neurosurgery/anesthesia resident (learners) team working together to manage an intraoperative crisis. Using a cadaveric cavernous carotid injury perfusion model, 7 neurosurgery and 6 anesthesia learners, were trained on appropriate vascular injury management using an endonasal endoscopic technique. Learners were evaluated on communication skills, crisis management algorithms, and implementation of appropriate skill sets at the right time. A preanatomic and postanatomic examination and postsimulation survey was administered to neurosurgery learners. Anesthesia learners provided posttraining evaluation through a tailored realism and teaching survey. Neurosurgery learners' anatomic examination score improved from presimulation (33.89%) to postsimulation (86.11%). No significant difference between learner specialties was observed for situation awareness, decision making, communications and teamwork, or leadership evaluations. Learners reported the simulation realistic, beneficial, and highly instructive. Realistic, first of kind, clinical simulation scenarios were presented to a neurosurgery/anesthesia resident team who worked together to manage an intraoperative crisis. Learners were effectively trained on crisis management, the importance of communication, and how to develop algorithms for future implementation in difficult scenarios. Learners were highly satisfied with the simulation training experience and requested that it be integrated more consistently into their residency training programs.

Patient Simulators Train Emergency Caregivers

NASA Technical Reports Server (NTRS)

2014-01-01

Johnson Space Center teamed up with Sarasota, Florida-based METI (now CAE Healthcare) through the STTR program to ruggedize the company’s patient simulators for training astronauts in microgravity environments. The design modifications were implemented in future patient simulators that are now used to train first responders in the US military as well as fire departments and other agencies that work in disaster zones.

Virtual reality simulators for gastrointestinal endoscopy training

PubMed Central

Triantafyllou, Konstantinos; Lazaridis, Lazaros Dimitrios; Dimitriadis, George D

2014-01-01

The use of simulators as educational tools for medical procedures is spreading rapidly and many efforts have been made for their implementation in gastrointestinal endoscopy training. Endoscopy simulation training has been suggested for ascertaining patient safety while positively influencing the trainees’ learning curve. Virtual simulators are the most promising tool among all available types of simulators. These integrated modalities offer a human-like endoscopy experience by combining virtual images of the gastrointestinal tract and haptic realism with using a customized endoscope. From their first steps in the 1980s until today, research involving virtual endoscopic simulators can be divided in two categories: investigation of the impact of virtual simulator training in acquiring endoscopy skills and measuring competence. Emphasis should also be given to the financial impact of their implementation in endoscopy, including the cost of these state-of-the-art simulators and the potential economic benefits from their usage. Advances in technology will contribute to the upgrade of existing models and the development of new ones; while further research should be carried out to discover new fields of application. PMID:24527175

Progress through precedent: Going where no helicopter simulator has gone before

NASA Technical Reports Server (NTRS)

Adams, Richard J.

1992-01-01

Helicopter simulators have been approved by means of special exemption; there are no FAA standards for simulators used in training or airmen Certification checking. The fixed-wing industry provides a precedent which can be used for expediting implementation of helicopter simulators. The analysis in this paper is founded on the experience with that precedent and is driven by a clear definition of helicopter user needs for (1) improved training at lower cost, (2) more comprehensive emergency training at lower risk, (3) increased fidelity of transition and instrument training compared with low-cost aircraft alternatives, and (4) certification credit for improved simulator training.

Simulating Retail Banking for Banking Students

ERIC Educational Resources Information Center

Supramaniam, Mahadevan; Shanmugam, Bala

2009-01-01

The purpose of this study was to examine the implementation flow and development of retail bank management simulation based training system which could provide a comprehensive knowledge about the operations and management of banks for the banking students. The prototype of a Retail banking simulation based training system was developed based on…

Use of Simulation-Based Training to Aid in Implementing Complex Health Technology.

PubMed

Devers, Veffa

2018-01-01

Clinicians are adult learners in a complex environment that historically does not invest in training in a way that is conducive to these types of learners. Adult learners are independent, self-directed, and goal oriented. In today's fast-paced clinical setting, a practical need exists for nurses and clinicians to master the technology they use on a daily basis, especially as medical devices have become more interconnected and complex. As hospitals look to embrace new technologies, medical device companies must provide clinical end-user training. This should be a required part of the selection process when considering the purchase of any complex medical technology. However, training busy clinicians in a traditional classroom setting can be difficult and costly. A simple, less expensive solution is online simulation training. This interactive training provides a virtual, "hands-on" end-user experience in advance of implementing new equipment. Online simulation training ensures knowledge retention and comprehension and, most importantly, that the training leads to end-user satisfaction and the ability to confidently operate new equipment. A review of the literature revealed that online simulation, coupled with the use of adult learning principles and experiential learning, may enhance the experience of clinical end users.

In-Home Parent Training of Functional Analysis Skills

ERIC Educational Resources Information Center

Stokes, John V.; Luiselli, James K.

2008-01-01

We taught two sets of parents to conduct a functional analysis (FA) under simulated conditions in their homes. Relative to a baseline (pre-training) phase, the accuracy of FA implementation by parents improved when they were given verbal, written, and video performance feedback. When training concluded, parents were able to implement FA accurately…

Effectiveness of online simulation training: Measuring faculty knowledge, perceptions, and intention to adopt.

PubMed

Kim, Sujeong; Park, Chang; O'Rourke, Jennifer

2017-04-01

Best practice standards of simulation recommend standardized simulation training for nursing faculty. Online training may offer an effective and more widely available alternative to in-person training. Using the Theory of Planned Behavior, this study evaluated the effectiveness of an online simulation training program, examining faculty's foundational knowledge of simulation as well as perceptions and intention to adopt. One-group pretest-posttest design. A large school of nursing with a main campus and five regional campuses in the Midwestern United States. Convenience sample of 52 faculty participants. Knowledge of foundational simulation principles was measured by pre/post-training module quizzes. Perceptions and the intention to adopt simulation were measured using the Faculty Attitudes and Intent to Use Related to the Human Patient Simulator questionnaire. There was a significant improvement in faculty knowledge after training and observable improvements in attitudes. Attitudes significantly influenced the intention to adopt simulation (B=2.54, p<0.001). Online simulation training provides an effective alternative for training large numbers of nursing faculty who seek to implement best practice of standards within their institutions. Copyright © 2016 Elsevier Ltd. All rights reserved.

DTkid: Interactive Simulation Software for Training Tutors of Children with Autism

ERIC Educational Resources Information Center

Randell, Tom; Hall, Martin; Bizo, Lewis; Remington, Bob

2007-01-01

Discrete-trial training (DTT) relies critically on implementation by trained tutors. We report three experiments carried out in the development of "DTkid"--interactive computer simulation software that presents "SIMon", a realistic virtual child with whom novice tutors can learn and practise DTT techniques. Experiments 1 and 2 exposed groups of…

Emergency manual implementation: can brief simulation-based or staff trainings increase familiarity and planned clinical use?

PubMed

Goldhaber-Fiebert, Sara N; Lei, Vivian; Nandagopal, Kiruthiga; Bereknyei, Sylvia

2015-05-01

Emergency manuals (EMs)-context-relevant sets of cognitive aids such as crisis checklists-are useful tools to enhance perioperative patient care. Studies in high-hazard industries demonstrate that humans, regardless of expertise, do not optimally retrieve or deploy key knowledge under stress. EM use has been shown in both health care simulation studies and other industries to help expert teams effectively manage critical events. However, clinical adoption and use are still nascent in health care. Recognizing that training with, access to, and cultural acceptance of EMs can be vital elements for successful implementation, this study assessed the impact of a brief in situ operating room (OR) staff training program on familiarity with EMs and intention to use them during critical events. Nine 50-minute training sessions were held with OR staff as part of a broader perioperative EM implementation. Participants primarily included OR nurses and surgical technologists. The simulation-based in situ trainings included why and how to use EMs, familiarization with format, simulated scenarios of critical events, and debriefings. A retrospective pre-post survey was conducted to determine participants' levels of EM familiarity and intentions to use EMs clinically. The 126 trained OR staff self-reported increases in awareness of the EM (p < .01), familiarity with EM (p < .01), willingness to use for educational review (p < .01), and intention to use during critical events (p < .01). Participants rated the sessions highly and expressed interest in more opportunities to practice using EMs. Implementing institutions should not only provide EMs in accessible places in ORs but also incorporate training mechanisms to increase clinicians' familiarity, cultural acceptance, and planned clinical use.

Implementation and evaluation of a dilation and evacuation simulation training curriculum.

PubMed

York, Sloane L; McGaghie, William C; Kiley, Jessica; Hammond, Cassing

2016-06-01

To evaluate obstetrics and gynecology resident physicians' performance following a simulation curriculum on dilation and evacuation (D&E) procedures. This study included two phases: simulation curriculum development and resident physician performance evaluation following training on a D&E simulator. Trainees participated in two evaluations. Simulation training evaluated participants performing six cases on a D&E simulator, measuring procedural time and a 26-step checklist of D&E steps. The operative training portion evaluated residents' performance after training on the simulator using mastery learning techniques. Intra-operative evaluation was based on a 21-step checklist score, Objective Structured Assessment of Technical Skills (OSATS), and percentage of cases completed. Twenty-two residents participated in simulation training, demonstrating improved performance from cases one and two to cases five and six, as measured by checklist score and procedural time (p<.001 and p=.001, respectively). Of 10 participants in the operative training, all performed at least three D&Es, while seven performed at least six cases. While checklist scores did not change significantly from the first to sixth case (mean for first case: 18.3; for sixth case: 19.6; p=.593), OSATS ratings improved from case one (19.7) to case three (23.5; p=.001) and to case six (26.8; p=.005). Trainees completed approximately 71.6% of their first case (range: 21.4-100%). By case six, the six participants performed 81.2% of the case (range: 14.3-100%). D&E simulation using a newly-developed uterine model and simulation curriculum improves resident technical skills. Simulation training with mastery learning techniques transferred to high level of performance in OR using checklist. The OSATS measured skills and showed improvement in performance with subsequent cases. Implementation of a D&E simulation curriculum offers potential for improved surgical training and abortion provision. Copyright © 2016 Elsevier Inc. All rights reserved.

Development of an Integrated Team Training Design and Assessment Architecture to Support Adaptability in Healthcare Teams

DTIC Science & Technology

2016-10-01

and implementation of embedded, adaptive feedback and performance assessment. The investigators also initiated work designing a Bayesian Belief ...training; Teamwork; Adaptive performance; Leadership; Simulation; Modeling; Bayesian belief networks (BBN) 16. SECURITY CLASSIFICATION OF: 17. LIMITATION...Trauma teams Team training Teamwork Adaptability Adaptive performance Leadership Simulation Modeling Bayesian belief networks (BBN) 6

76 FR 25657 - Cross-Waiver of Liability Clauses

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-05

... activities related to ground support, test, training, simulation, or guidance and control equipment and... process for use other than for ISS-related activities in implementation of the IGA. (8) ``Related Entity... activities related to ground support, test, training, simulation, or guidance and control equipment, and...

Design of 3D simulation engine for oilfield safety training

NASA Astrophysics Data System (ADS)

Li, Hua-Ming; Kang, Bao-Sheng

2015-03-01

Aiming at the demand for rapid custom development of 3D simulation system for oilfield safety training, this paper designs and implements a 3D simulation engine based on script-driven method, multi-layer structure, pre-defined entity objects and high-level tools such as scene editor, script editor, program loader. A scripting language been defined to control the system's progress, events and operating results. Training teacher can use this engine to edit 3D virtual scenes, set the properties of entity objects, define the logic script of task, and produce a 3D simulation training system without any skills of programming. Through expanding entity class, this engine can be quickly applied to other virtual training areas.

The Avenor Virtual Trainer Project--A 3D Interactive Training Module on Energy Control Procedures: Development and First Validation Results.

ERIC Educational Resources Information Center

Giardina, Max

This paper examines the implementation of 3D simulation through the development of the Avenor Virtual Trainer and how situated learning and fidelity of model representation become the basis for more effective Interactive Multimedia Training Situations. The discussion will focus of some principles concerned with situated training, simulation,…

Comparing the cost-effectiveness of simulation modalities: a case study of peripheral intravenous catheterization training.

PubMed

Isaranuwatchai, Wanrudee; Brydges, Ryan; Carnahan, Heather; Backstein, David; Dubrowski, Adam

2014-05-01

While the ultimate goal of simulation training is to enhance learning, cost-effectiveness is a critical factor. Research that compares simulation training in terms of educational- and cost-effectiveness will lead to better-informed curricular decisions. Using previously published data we conducted a cost-effectiveness analysis of three simulation-based programs. Medical students (n = 15 per group) practiced in one of three 2-h intravenous catheterization skills training programs: low-fidelity (virtual reality), high-fidelity (mannequin), or progressive (consisting of virtual reality, task trainer, and mannequin simulator). One week later, all performed a transfer test on a hybrid simulation (standardized patient with a task trainer). We used a net benefit regression model to identify the most cost-effective training program via paired comparisons. We also created a cost-effectiveness acceptability curve to visually represent the probability that one program is more cost-effective when compared to its comparator at various 'willingness-to-pay' values. We conducted separate analyses for implementation and total costs. The results showed that the progressive program had the highest total cost (p < 0.001) whereas the high-fidelity program had the highest implementation cost (p < 0.001). While the most cost-effective program depended on the decision makers' willingness-to-pay value, the progressive training program was generally most educationally- and cost-effective. Our analyses suggest that a progressive program that strategically combines simulation modalities provides a cost-effective solution. More generally, we have introduced how a cost-effectiveness analysis may be applied to simulation training; a method that medical educators may use to investment decisions (e.g., purchasing cost-effective and educationally sound simulators).

Simulation training: a systematic review of simulation in arthroscopy and proposal of a new competency-based training framework.

PubMed

Tay, Charison; Khajuria, Ankur; Gupte, Chinmay

2014-01-01

Traditional orthopaedic training has followed an apprenticeship model whereby trainees enhance their skills by operating under guidance. However the introduction of limitations on training hours and shorter training programmes mean that alternative training strategies are required. To perform a literature review on simulation training in arthroscopy and devise a framework that structures different simulation techniques that could be used in arthroscopic training. A systematic search of Medline, Embase, Google Scholar and the Cochrane Databases were performed. Search terms included "virtual reality OR simulator OR simulation" and "arthroscopy OR arthroscopic". 14 studies evaluating simulators in knee, shoulder and hip arthroplasty were included. The majority of the studies demonstrated construct and transference validity but only one showed concurrent validity. More studies are required to assess its potential as a training and assessment tool, skills transference between simulators and to determine the extent of skills decay from prolonged delays in training. We also devised a "ladder of arthroscopic simulation" that provides a competency-based framework to implement different simulation strategies. The incorporation of simulation into an orthopaedic curriculum will depend on a coordinated approach between many bodies. But the successful integration of simulators in other areas of surgery supports a possible role for simulation in advancing orthopaedic education. Copyright © 2014 Surgical Associates Ltd. Published by Elsevier Ltd. All rights reserved.

The changing face of surgical education: simulation as the new paradigm.

PubMed

Scott, Daniel J; Cendan, Juan C; Pugh, Carla M; Minter, Rebecca M; Dunnington, Gary L; Kozar, Rosemary A

2008-06-15

Surgical simulation has evolved considerably over the past two decades and now plays a major role in training efforts designed to foster the acquisition of new skills and knowledge outside of the clinical environment. Numerous driving forces have fueled this fundamental change in educational methods, including concerns over patient safety and the need to maximize efficiency within the context of limited work hours and clinical exposure. The importance of simulation has been recognized by the major stake-holders in surgical education, and the Residency Review Committee has mandated that all programs implement skills training curricula in 2008. Numerous issues now face educators who must use these novel training methods. It is important that these individuals have a solid understanding of content, development, research, and implementation aspects regarding simulation. This paper highlights presentations about these topics from a panel of experts convened at the 2008 Academic Surgical Congress.

THE CHANGING FACE OF SURGICAL EDUCATION: SIMULATION AS THE NEW PARADIGM

PubMed Central

Scott, Daniel J.; Cendan, Juan C.; Pugh, Carla M.; Minter, Rebecca M.; Dunnington, Gary L.; Kozar, Rosemary A.

2009-01-01

Surgical simulation has evolved considerably over the past two decades and now plays a major role in training efforts designed to foster the acquisition of new skills and knowledge outside of the clinical environment. Numerous driving forces have fueled this fundamental change in educational methods, including concerns over patient safety and the need to maximize efficiency within the context of limited work hours and clinical exposure. The importance of simulation has been recognized by the major stake-holders in surgical education, and the Residency Review Committee has mandated that all programs implement skills training curricula in 2008. Numerous issues now face educators who must use these novel training methods. It is important that these individuals have a solid understanding of content, development, research, and implementation aspects regarding simulation. This paper highlights presentations about these topics from a panel of experts convened at the 2008 Academic Surgical Congress. PMID:18498868

Virtual Reality: Teaching Tool of the Twenty-First Century?

ERIC Educational Resources Information Center

Hoffman, Helene; Vu, Dzung

1997-01-01

Virtual reality-based procedural and surgical simulations promise to revolutionize medical training. A wide range of simulations representing diverse content areas and varied implementation strategies are under development or in early use. The new systems will make broad-based training experiences available for students at all levels without risks…

Obstetric simulation as a risk control strategy: course design and evaluation.

PubMed

Gardner, Roxane; Walzer, Toni B; Simon, Robert; Raemer, Daniel B

2008-01-01

Patient safety initiatives aimed at reducing medical errors and adverse events are being implemented in Obstetrics. The Controlled Risk Insurance Company (CRICO), Risk Management Foundation (RMF) of the Harvard Medical Institutions pursued simulation as an anesthesia risk control strategy. Encouraged by their success, CRICO/RMF promoted simulation-based team training as a risk control strategy for obstetrical providers. We describe the development, implementation, and evaluation of an obstetric simulation-based team training course grounded in crisis resource management (CRM) principles. We pursued systematic design of course development, implementation, and evaluation in 3 phases, including a 1-year or more posttraining follow-up with self-assessment questionnaires. The course was highly rated overall by participants immediately after the course and 1-year or more after the course. Most survey responders reported having experienced a critical clinical event since the course and that various aspects of their teamwork had significantly or somewhat improved as a result of the course. Most (86%) reported CRM principles as useful for obstetric faculty and most (59%) recommended repeating the simulation course every 2 years. A simulation-based team-training course for obstetric clinicians was developed and is a central component of CRICO/RMF's obstetric risk management incentive program that provides a 10% reduction in annual obstetrical malpractice premiums. The course was highly regarded immediately and 1 year or more after completing the course. Most survey responders reported improved teamwork and communication in managing a critical obstetric event in the interval since taking the course. Simulation-based CRM training can serve as a strategy for mitigating adverse perinatal events.

A consensus-based framework for design, validation, and implementation of simulation-based training curricula in surgery.

PubMed

Zevin, Boris; Levy, Jeffrey S; Satava, Richard M; Grantcharov, Teodor P

2012-10-01

Simulation-based training can improve technical and nontechnical skills in surgery. To date, there is no consensus on the principles for design, validation, and implementation of a simulation-based surgical training curriculum. The aim of this study was to define such principles and formulate them into an interoperable framework using international expert consensus based on the Delphi method. Literature was reviewed, 4 international experts were queried, and consensus conference of national and international members of surgical societies was held to identify the items for the Delphi survey. Forty-five international experts in surgical education were invited to complete the online survey by ranking each item on a Likert scale from 1 to 5. Consensus was predefined as Cronbach's α ≥0.80. Items that 80% of experts ranked as ≥4 were included in the final framework. Twenty-four international experts with training in general surgery (n = 11), orthopaedic surgery (n = 2), obstetrics and gynecology (n = 3), urology (n = 1), plastic surgery (n = 1), pediatric surgery (n = 1), otolaryngology (n = 1), vascular surgery (n = 1), military (n = 1), and doctorate-level educators (n = 2) completed the iterative online Delphi survey. Consensus among participants was achieved after one round of the survey (Cronbach's α = 0.91). The final framework included predevelopment analysis; cognitive, psychomotor, and team-based training; curriculum validation evaluation and improvement; and maintenance of training. The Delphi methodology allowed for determination of international expert consensus on the principles for design, validation, and implementation of a simulation-based surgical training curriculum. These principles were formulated into a framework that can be used internationally across surgical specialties as a step-by-step guide for the development and validation of future simulation-based training curricula. Copyright © 2012 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

Vertical flight training: An overview of training and flight simulator technology with emphasis on rotary-wing requirements

NASA Technical Reports Server (NTRS)

Alderete, Thomas S.; Ascencio-Lee, Carmen E.; Bray, Richard; Carlton, John; Dohme, Jack; Eshow, Michelle M.; Francis, Stephen; Lee, Owen M.; Lintern, Gavan; Lombardo, David A.

1994-01-01

The principal purpose of this publication is to provide a broad overview of the technology that is relevant to the design of aviation training systems and of the techniques applicable to the development, use, and evaluation of those systems. The issues addressed in our 11 chapters are, for the most part, those that would be expected to surface in any informed discussion of the major characterizing elements of aviation training systems. Indeed, many of the same facets of vertical-flight training discussed were recognized and, to some extent, dealt with at the 1991 NASA/FAA Helicopter Simulator Workshop. These generic topics are essential to a sound understanding of training and training systems, and they quite properly form the basis of any attempt to systematize the development and evaluation of more effective, more efficient, more productive, and more economical approaches to aircrew training. Individual chapters address the following topics: an overview of the vertical flight industry: the source of training requirements; training and training schools: meeting current requirements; training systems design and development; transfer of training and cost-effectiveness; the military quest for flight training effectiveness; alternative training systems; training device manufacturing; simulator aero model implementation; simulation validation in the frequency domain; cockpit motion in helicopter simulation; and visual space perception in flight simulators.

Implementing and Evaluating an Innovative Approach to Simulation Training Acquisitions

DTIC Science & Technology

2006-01-01

busi- ness model, compares it with other approaches for buying simulations and simulation training, reviews economic theories relevant to the model, and...Points in Common with Other Approaches but Also Some Distinctive Characteristics ........................... 53 Contents vii CHAPTER FOUR The Economic ...Appropriate? .................... 65 4.3. Summary of Key Findings from Economic Theory .............. 72 xiii Summary In the wake of the failure of the Joint

Managing simulation-based training: A framework for optimizing learning, cost, and time

NASA Astrophysics Data System (ADS)

Richmond, Noah Joseph

This study provides a management framework for optimizing training programs for learning, cost, and time when using simulation based training (SBT) and reality based training (RBT) as resources. Simulation is shown to be an effective means for implementing activity substitution as a way to reduce risk. The risk profile of 22 US Air Force vehicles are calculated, and the potential risk reduction is calculated under the assumption of perfect substitutability of RBT and SBT. Methods are subsequently developed to relax the assumption of perfect substitutability. The transfer effectiveness ratio (TER) concept is defined and modeled as a function of the quality of the simulator used, and the requirements of the activity trained. The Navy F/A-18 is then analyzed in a case study illustrating how learning can be maximized subject to constraints in cost and time, and also subject to the decision maker's preferences for the proportional and absolute use of simulation. Solution methods for optimizing multiple activities across shared resources are next provided. Finally, a simulation strategy including an operations planning program (OPP), an implementation program (IP), an acquisition program (AP), and a pedagogical research program (PRP) is detailed. The study provides the theoretical tools to understand how to leverage SBT, a case study demonstrating these tools' efficacy, and a set of policy recommendations to enable the US military to better utilize SBT in the future.

Simulation-based multidisciplinary team training decreases time to critical operations for trauma patients.

PubMed

Murphy, Margaret; Curtis, Kate; Lam, Mary K; Palmer, Cameron S; Hsu, Jeremy; McCloughen, Andrea

2018-05-01

Simulation has been promoted as a platform for training trauma teams. However, it is not clear if this training has an impact on health service delivery and patient outcomes. This study evaluates the association between implementation of a simulation based multidisciplinary trauma team training program at a metropolitan trauma centre and subsequent patient outcomes. This was a retrospective review of trauma registry data collected at an 850-bed Level 1 Adult Trauma Centre in Sydney, Australia. Two concurrent four-year periods, before and after implementation of a simulation based multidisciplinary trauma team training program were compared for differences in time to critical operations, Emergency Department (ED) length of stay (LOS) and patient mortality. There were 2389 major trauma patients admitted to the hospital during the study, 1116 in the four years preceding trauma team training (the PREgroup) and 1273 in the subsequent 4 years (the POST group). There were no differences between the groups with respect to gender, body region injured, incidence of polytrauma, and pattern of arrival to ED. The POST group was older (median age 54 versus 43 years, p < 0.001) and had a higher incidence of falls and assaults (p < 0.001). There was a reduction in time to critical operation, from 2.63 h (IQR 1.23-5.12) in the PRE-group to 0.55 h (IQR 0.22-1.27) in the POST-group, p < 0.001. The overall ED LOS increased, and there was no reduction in mortality. Post-hoc analysis found LOS in ED was reduced in the cohort requiring critical operations, p < 0.001. The implementation of trauma team training was associated with a reduction in time to critical operation while overall ED length of stay increased. Simulation is promoted as a platform for training teams; but the complexity of trauma care challenges efforts to demonstrate direct links between multidisciplinary team training and improved outcomes. There remain considerable gaps in knowledge as to how team training impacts health service delivery and patient outcomes. Retrospective comparative therapeutic/care management study, Level III evidence. Crown Copyright © 2018. Published by Elsevier Ltd. All rights reserved.

A Special Education Systems Simulation Model: Teacher Training Emphasis.

ERIC Educational Resources Information Center

Jones, Wayne; And Others

The authors illustrate the application of a systems approach for educational decision-makers through utilization of a special education systems simulation model with emphasis on teacher training. It is noted that the model provides a procedure to answer "what if" type questions before actually implementing a proposed program. Discussed are the…

Perceptions of the roles of social networking in simulation augmented medical education and training.

PubMed

Martin, Rob; Rojas, David; Cheung, Jeffrey J H; Weber, Bryce; Kapralos, Bill; Dubrowski, Adam

2013-01-01

Simulation-augmented education and training (SAET) is an expensive educational tool that may be facilitated through social networking technologies or Computer Supported Collaborative Learning (CSCL). This study examined the perceptions of medical undergraduates participating in SAET for knot tying skills to identify perceptions and barriers to implementation of social networking technologies within a broader medical education curriculum. The majority of participants (89%) found CSCL aided their learning of the technical skill and identified privacy and accessibility as major barriers to the tools implementation.

Psychomotor testing predicts rate of skill acquisition for proficiency-based laparoscopic skills training.

PubMed

Stefanidis, Dimitrios; Korndorffer, James R; Black, F William; Dunne, J Bruce; Sierra, Rafael; Touchard, Cheri L; Rice, David A; Markert, Ronald J; Kastl, Peter R; Scott, Daniel J

2006-08-01

Laparoscopic simulator training translates into improved operative performance. Proficiency-based curricula maximize efficiency by tailoring training to meet the needs of each individual; however, because rates of skill acquisition vary widely, such curricula may be difficult to implement. We hypothesized that psychomotor testing would predict baseline performance and training duration in a proficiency-based laparoscopic simulator curriculum. Residents (R1, n = 20) were enrolled in an IRB-approved prospective study at the beginning of the academic year. All completed the following: a background information survey, a battery of 12 innate ability measures (5 motor, and 7 visual-spatial), and baseline testing on 3 validated simulators (5 videotrainer [VT] tasks, 12 virtual reality [minimally invasive surgical trainer-virtual reality, MIST-VR] tasks, and 2 laparoscopic camera navigation [LCN] tasks). Participants trained to proficiency, and training duration and number of repetitions were recorded. Baseline test scores were correlated to skill acquisition rate. Cutoff scores for each predictive test were calculated based on a receiver operator curve, and their sensitivity and specificity were determined in identifying slow learners. Only the Cards Rotation test correlated with baseline simulator ability on VT and LCN. Curriculum implementation required 347 man-hours (6-person team) and 795,000 dollars of capital equipment. With an attendance rate of 75%, 19 of 20 residents (95%) completed the curriculum by the end of the academic year. To complete training, a median of 12 hours (range, 5.5-21), and 325 repetitions (range, 171-782) were required. Simulator score improvement was 50%. Training duration and repetitions correlated with prior video game and billiard exposure, grooved pegboard, finger tap, map planning, Rey Figure Immediate Recall score, and baseline performance on VT and LCN. The map planning cutoff score proved most specific in identifying slow learners. Proficiency-based laparoscopic simulator training provides improvement in performance and can be effectively implemented as a routine part of resident education, but may require significant resources. Although psychomotor testing may be of limited value in the prediction of baseline laparoscopic performance, its importance may lie in the prediction of the rapidity of skill acquisition. These tests may be useful in optimizing curricular design by allowing the tailoring of training to individual needs.

The development and implementation of cockpit resource management in UAL recurrent training

NASA Technical Reports Server (NTRS)

Shroyer, David H.

1987-01-01

Line Oriented Flight Training (LOFT) for United Airlines started in 1976. At that time it was basically no more than a line-simulated training function conducted in a full-mission simulator with no attention or stress on its human factor content. Very soon after the implementation of the LOFT program concerns were voiced about certain crew behavioral situations they were observing in the flight crew's execution of cockpit duties. These duties involved emergency procedures as well as irregular and normal procedures and situations. It was evident that new information was surfacing concerning crew interaction, or its lack thereof, in the cockpit and its effect on satisfactory performance. These observations naturally raised the question of how this information translated into the safety of aircraft operations. A training system had to be repetitive, the crew interactive, and the training had to be conducted under the crew concept. The foundation had to have two other factors: (1) it was necessary to have adequate human factor content, and (2) an advanced state-of-the-art simulator and appropriate electronic devices were required. These concepts are further discussed.

Design and Realization of Ship Fire Simulation Training System Based on Unity3D

NASA Astrophysics Data System (ADS)

Ting, Ye; Feng, Chen; Wenqiang, Wang; Kai, Yang

2018-01-01

Ship fire training is a very important training to ensure the safety of the ship, but limited by the characteristics of the ship itself, it is difficult to carry out fire training on the ship. This paper proposes to introduce a virtual reality technology to build a set of ship fire simulation training system, used to improve the quality of training, reduce training costs. First, the system design ideas are elaborated, and the system architecture diagram is given. Then, the key technologies in the process of system implementation are analyzed. Finally, the system examples are built and tested.

Changes in self-efficacy, collective efficacy and patient outcome following interprofessional simulation training on postpartum haemorrhage.

PubMed

Egenberg, Signe; Øian, Pål; Eggebø, Torbjørn Moe; Arsenovic, Mirjana Grujic; Bru, Lars Edvin

2017-10-01

To examine whether interprofessional simulation training on management of postpartum haemorrhage enhances self-efficacy and collective efficacy and reduces the blood transfusion rate after birth. Postpartum haemorrhage is a leading cause of maternal morbidity and mortality worldwide, although it is preventable in most cases. Interprofessional simulation training might help improve the competence of health professionals dealing with postpartum haemorrhage, and more information is needed to determine its potential. Multimethod, quasi-experimental, pre-post intervention design. Interprofessional simulation training on postpartum haemorrhage was implemented for midwives, obstetricians and auxiliary nurses in a university hospital. Training included realistic scenarios and debriefing, and a measurement scale for perceived postpartum haemorrhage-specific self-efficacy, and collective efficacy was developed and implemented. Red blood cell transfusion was used as the dependent variable for improved patient outcome pre-post intervention. Self-efficacy and collective efficacy levels were significantly increased after training. The overall red blood cell transfusion rate did not change, but there was a significant reduction in the use of ≥5 units of blood products related to severe bleeding after birth. The study contributes to new knowledge on how simulation training through mastery and vicarious experiences, verbal persuasion and psychophysiological state might enhance postpartum haemorrhage-specific self-efficacy and collective efficacy levels and thereby predict team performance. The significant reduction in severe postpartum haemorrhage after training, indicated by reduction in ≥5 units of blood transfusions, corresponds well with the improvement in collective efficacy, and might reflect the emphasis on collective efforts to counteract severe cases of postpartum haemorrhage. Interprofessional simulation training in teams may contribute to enhanced prevention and management of postpartum haemorrhage, shown by a significant increase in perceived efficacy levels combined with an indicated reduction of severe postpartum haemorrhage after training. © 2016 John Wiley & Sons Ltd.

Neutron Source Facility Training Simulator Based on EPICS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, Young Soo; Wei, Thomas Y.; Vilim, Richard B.

A plant operator training simulator is developed for training the plant operators as well as for design verification of plant control system (PCS) and plant protection system (PPS) for the Kharkov Institute of Physics and Technology Neutron Source Facility. The simulator provides the operator interface for the whole plant including the sub-critical assembly coolant loop, target coolant loop, secondary coolant loop, and other facility systems. The operator interface is implemented based on Experimental Physics and Industrial Control System (EPICS), which is a comprehensive software development platform for distributed control systems. Since its development at Argonne National Laboratory, it has beenmore » widely adopted in the experimental physics community, e.g. for control of accelerator facilities. This work is the first implementation for a nuclear facility. The main parts of the operator interface are the plant control panel and plant protection panel. The development involved implementation of process variable database, sequence logic, and graphical user interface (GUI) for the PCS and PPS utilizing EPICS and related software tools, e.g. sequencer for sequence logic, and control system studio (CSS-BOY) for graphical use interface. For functional verification of the PCS and PPS, a plant model is interfaced, which is a physics-based model of the facility coolant loops implemented as a numerical computer code. The training simulator is tested and demonstrated its effectiveness in various plant operation sequences, e.g. start-up, shut-down, maintenance, and refueling. It was also tested for verification of the plant protection system under various trip conditions.« less

A simulator for surgery training: optimal sensory stimuli in a bone pinning simulation

NASA Astrophysics Data System (ADS)

Daenzer, Stefan; Fritzsche, Klaus

2008-03-01

Currently available low cost haptic devices allow inexpensive surgical training with no risk to patients. Major drawbacks of lower cost devices include limited maximum feedback force and the incapability to expose occurring moments. Aim of this work was the design and implementation of a surgical simulator that allows the evaluation of multi-sensory stimuli in order to overcome the occurring drawbacks. The simulator was built following a modular architecture to allow flexible combinations and thorough evaluation of different multi-sensory feedback modules. A Kirschner-Wire (K-Wire) tibial fracture fixation procedure was defined and implemented as a first test scenario. A set of computational metrics has been derived from the clinical requirements of the task to objectively assess the trainees performance during simulation. Sensory feedback modules for haptic and visual feedback have been developed, each in a basic and additionally in an enhanced form. First tests have shown that specific visual concepts can overcome some of the drawbacks coming along with low cost haptic devices. The simulator, the metrics and the surgery scenario together represent an important step towards a better understanding of the perception of multi-sensory feedback in complex surgical training tasks. Field studies on top of the architecture can open the way to risk-less and inexpensive surgical simulations that can keep up with traditional surgical training.

SCE&G Cope Station simulator training program development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stottlemire, J.L.; Fabry, R.

1996-11-01

South Carolina Electric and Gas Company made a significant investment into meeting the needs of their customers in designing and building the new fossil Generating Station near Cope, South Carolina. Cope Station is a state-of-the-art, 385 MW plant, with equipment and design features that will provide the plant with the capabilities of achieving optimum availability and capability. SCE&G has also implemented a team concept approach to plant organization at Cope Station. The modern plant design, operating philosophy, and introduction of a large percentage of new operations personnel presented a tremendous challenge in preparing for plant commissioning and commercial operation. SCE&G`smore » answer to this challenge was to hire an experienced operations trainer, and implement a comprehensive training program. An important part of the training investment was the procurement of a plant specific control room simulator. SCE&G, through tailored collaboration with the Electric Power Research Institute (EPRI), developed a specification for a simulator with the features necessary for training the initial plant staff as well as advanced operator training. The high-fidelity CRT based training simulator is a stimulated system that completely and accurately simulates the various plant systems, process startups, shutdowns, normal operating scenarios, and malfunctions. The process model stimulates a Foxboro Distributed Control System consisting of twelve control processors, five WP51 work stations, and one AW51 file server. The workstations, file server and support hardware and software necessary to interface with ESSCOR`s FSIM4 software was provided by Foxoboro.« less

Implementation of a novel portfolio of structured, curriculum-aligned, simulation-based, cardiothoracic surgery training courses: Evolving the delivery of surgical education.

PubMed

Moorjani, Narain; Lewis, Michael; Shah, Rajesh; Barnard, Sion; Graham, Tim; Rathinam, Sridhar

2017-12-01

The provision of high-quality cardiothoracic surgical training faces many challenges. This has generated an increased interest in simulation-based learning, which can provide a less stressful environment for deliberate practice. We developed a comprehensive, structured program of knowledge and simulation-based learning aligned to the official cardiothoracic surgery curriculum. A portfolio of 10 curriculum-aligned training courses was designed for cardiothoracic surgical trainees during their 6-year training program. The courses were delivered through a multitude of education methods, including live porcine operating simulation models, and were evaluated through a series of quantitative (5-point Likert-scale) and qualitative assessments. The trainees (n = 15-21 per course) also completed pre- and postsession self-confidence and competency levels for each training episode of knowledge and skill, respectively. In addition, board examination pass rates were assessed in the 3-year periods before and after implementation of the courses. Quantitative analysis of the trainees' feedback demonstrated an extremely positive view of the portfolio of the simulation-based training courses with excellent satisfaction scores (out of 5) for teaching sessions (4.44 ± 0.07), faculty (4.64 ± 0.07), content and materials (4.63 ± 0.07), and facilities (4.73 ± 0.05). The courses have shown a significant improvement in the post-self-confidence (7.98 ± 0.13 vs 5.62 ± 0.20, P < .01) and perceived self-competency (8.10 ± 0.10 vs 5.67 ± 0.11, P < .01) scores for all courses. Examination pass rates significantly improved in the 3-year period after attendance at the courses (94.82% ± 2.34% vs 76.26% ± 3.23%, P < .005). This study has described the implementation of the only extensive program of structured simulation-based courses that has been developed to complement clinical training in cardiothoracic surgery. Crown Copyright © 2017. Published by Elsevier Inc. All rights reserved.

What is going on in augmented reality simulation in laparoscopic surgery?

PubMed

Botden, Sanne M B I; Jakimowicz, Jack J

2009-08-01

To prevent unnecessary errors and adverse results of laparoscopic surgery, proper training is of paramount importance. A safe way to train surgeons for laparoscopic skills is simulation. For this purpose traditional box trainers are often used, however they lack objective assessment of performance. Virtual reality laparoscopic simulators assess performance, but lack realistic haptic feedback. Augmented reality (AR) combines a virtual reality (VR) setting with real physical materials, instruments, and feedback. This article presents the current developments in augmented reality laparoscopic simulation. Pubmed searches were performed to identify articles regarding surgical simulation and augmented reality. Identified companies manufacturing an AR laparoscopic simulator received the same questionnaire referring to the features of the simulator. Seven simulators that fitted the definition of augmented reality were identified during the literature search. Five of the approached manufacturers returned a completed questionnaire, of which one simulator appeared to be VR and was therefore not applicable for this review. Several augmented reality simulators have been developed over the past few years and they are improving rapidly. We recommend the development of AR laparoscopic simulators for component tasks of procedural training. AR simulators should be implemented in current laparoscopic training curricula, in particular for laparoscopic suturing training.

Surgical simulators in urological training--views of UK Training Programme Directors.

PubMed

Forster, James A; Browning, Anthony J; Paul, Alan B; Biyani, C Shekhar

2012-09-01

What's known on the subject? and What does the study add? The role of surgical simulators is currently being debated in urological and other surgical specialties. Simulators are not presently implemented in the UK urology training curriculum. The availability of simulators and the opinions of Training Programme Directors' (TPD) on their role have not been described. In the present questionnaire-based survey, the trainees of most, but not all, UK TPDs had access to laparoscopic simulators, and that all responding TPDs thought that simulators improved laparoscopic training. We hope that the present study will be a positive step towards making an agreement to formally introduce simulators into the UK urology training curriculum. To discuss the current situation on the use of simulators in surgical training. To determine the views of UK Urology Training Programme Directors (TPDs) on the availability and use of simulators in Urology at present, and to discuss the role that simulators may have in future training. An online-questionnaire survey was distributed to all UK Urology TPDs. In all, 16 of 21 TPDs responded. All 16 thought that laparoscopic simulators improved the quality of laparoscopic training. The trainees of 13 TPDs had access to a laparoscopic simulator (either in their own hospital or another hospital in the deanery). Most TPDs thought that trainees should use simulators in their free time, in quiet time during work hours, or in teaching sessions (rather than incorporated into the weekly timetable). We feel that the current apprentice-style method of training in urological surgery is out-dated. We think that all TPDs and trainees should have access to a simulator, and that a formal competency based simulation training programme should be incorporated into the urology training curriculum, with trainees reaching a minimum proficiency on a simulator before undertaking surgical procedures. © 2012 THE AUTHORS. BJU INTERNATIONAL © 2012 BJU INTERNATIONAL.

The effect of distributed virtual reality simulation training on cognitive load during subsequent dissection training.

PubMed

Andersen, Steven Arild Wuyts; Konge, Lars; Sørensen, Mads Sølvsten

2018-05-07

Complex tasks such as surgical procedures can induce excessive cognitive load (CL), which can have a negative effect on learning, especially for novices. To investigate if repeated and distributed virtual reality (VR) simulation practice induces a lower CL and higher performance in subsequent cadaveric dissection training. In a prospective, controlled cohort study, 37 residents in otorhinolaryngology received VR simulation training either as additional distributed practice prior to course participation (intervention) (9 participants) or as standard practice during the course (control) (28 participants). Cognitive load was estimated as the relative change in secondary-task reaction time during VR simulation and cadaveric procedures. Structured distributed VR simulation practice resulted in lower mean reaction times (32% vs. 47% for the intervention and control group, respectively, p < 0.01) as well as a superior final-product performance during subsequent cadaveric dissection training. Repeated and distributed VR simulation causes a lower CL to be induced when the learning situation is increased in complexity. A suggested mechanism is the formation of mental schemas and reduction of the intrinsic CL. This has potential implications for surgical skills training and suggests that structured, distributed training be systematically implemented in surgical training curricula.

Modeling and Simulation: A Rationale for Implementing New Training Technologies.

ERIC Educational Resources Information Center

Mattoon, Joseph S.

1996-01-01

Describes and advocates various technologies which have modernized the Air Force's Specialized Undergraduate Pilot Training (SUPT). After outlining some theoretical background, the article provides details on student proficiency profiles, the portable electronic trainer, the unit training device, specialized visual and acoustic displays, and the…

Interactive Graphics Simulator: Design, Development, and Effectiveness/Cost Evaluation. Final Report.

ERIC Educational Resources Information Center

Pieper, William J.; And Others

This study was initiated to design, develop, implement, and evaluate a videodisc-based simulator system, the Interactive Graphics Simulator (IGS) for 6883 Converter Flight Control Test Station training at Lowry Air Force Base, Colorado. The simulator provided a means for performing task analysis online, developing simulations from the task…

Preparing pharmacists to deliver a targeted service in hypertension management: evaluation of an interprofessional training program.

PubMed

Bajorek, Beata V; Lemay, Kate S; Magin, Parker J; Roberts, Christopher; Krass, Ines; Armour, Carol L

2015-09-28

Non-adherence to medicines by patients and suboptimal prescribing by clinicians underpin poor blood pressure (BP) control in hypertension. In this study, a training program was designed to enable community pharmacists to deliver a service in hypertension management targeting therapeutic adjustments and medication adherence. A comprehensive evaluation of the training program was undertaken. Tailored training comprising a self-directed pre-work manual, practical workshop (using real patients), and practice scenarios, was developed and delivered by an inter-professional team (pharmacists, GPs). Supported by practical and written assessment, the training focused on the principles of BP management, BP measurement skills, and adherence strategies. Pharmacists' experience of the training (expectations, content, format, relevance) was evaluated quantitatively and qualitatively. Immediate feedback was obtained via a questionnaire comprising Likert scales (1 = "very well" to 7 = "poor") and open-ended questions. Further in-depth qualitative evaluation was undertaken via semi-structured interviews several months post-training (and post service implementation). Seventeen pharmacists were recruited, trained and assessed as competent. All were highly satisfied with the training; other than the 'amount of information provided' (median score = 5, "just right"), all aspects of training attained the most positive score of '1'. Pharmacists most valued the integrated team-based approach, GP involvement, and inclusion of real patients, as well as the pre-reading manual, BP measurement workshop, and case studies (simulation). Post-implementation the interviews highlighted that comprehensive training increased pharmacists' confidence in providing the service, however, training of other pharmacy staff and patient recruitment strategies were highlighted as a need in future. Structured, multi-modal training involving simulated and inter-professional learning is effective in preparing selected community pharmacists for the implementation of new services in the context of hypertension management. This training could be further enhanced to prepare pharmacists for the challenges encountered in implementing and evaluating services in practice.

Development and validation of an artificial wetlab training system for the lumbar discectomy.

PubMed

Adermann, Jens; Geissler, Norman; Bernal, Luis E; Kotzsch, Susanne; Korb, Werner

2014-09-01

An initial research indicated that realistic haptic simulators with an adapted training concept are needed to enhance the training for spinal surgery. A cognitive task analysis (CTA) was performed to define a realistic and helpful scenario-based simulation. Based on the results a simulator for lumbar discectomy was developed. Additionally, a realistic training operating room was built for a pilot. The results were validated. The CTA showed a need for realistic scenario-based training in spine surgery. The developed simulator consists of synthetic bone structures, synthetic soft tissue and an advanced bleeding system. Due to the close interdisciplinary cooperation of surgeons between engineers and psychologists, the iterative multicentre validation showed that the simulator is visually and haptically realistic. The simulator offers integrated sensors for the evaluation of the traction being used and the compression during surgery. The participating surgeons in the pilot workshop rated the simulator and the training concept as very useful for the improvement of their surgical skills. In the context of the present work a precise definition for the simulator and training concept was developed. The additional implementation of sensors allows the objective evaluation of the surgical training by the trainer. Compared to other training simulators and concepts, the high degree of objectivity strengthens the acceptance of the feedback. The measured data of the nerve root tension and the compression of the dura can be used for intraoperative control and a detailed postoperative evaluation.

Dynamic simulation of train derailments

DOT National Transportation Integrated Search

2006-11-05

This paper describes a planar rigid-body model to examine the gross motions of rail cars in a train derailment. The model is implemented using a commercial software package called ADAMS (Automatic Dynamic Analysis of Mechanical Systems). The results ...

Virtual reality disaster training: translation to practice.

PubMed

Farra, Sharon L; Miller, Elaine T; Hodgson, Eric

2015-01-01

Disaster training is crucial to the mitigation of both mortality and morbidity associated with disasters. Just as clinical practice needs to be grounded in evidence, effective disaster education is dependent upon the development and use of andragogic and pedagogic evidence. Educational research findings must be transformed into useable education strategies. Virtual reality simulation is a teaching methodology that has the potential to be a powerful educational tool. The purpose of this article is to translate research findings related to the use of virtual reality simulation in disaster training into education practice. The Ace Star Model serves as a valuable framework to translate the VRS teaching methodology and improve disaster training of healthcare professionals. Using the Ace Star Model as a framework to put evidence into practice, strategies for implementing a virtual reality simulation are addressed. Practice guidelines, implementation recommendations, integration to practice and evaluation are discussed. It is imperative that health educators provide more exemplars of how research evidence can be moved through the various stages of the model to advance practice and sustain learning outcomes. Copyright © 2013 Elsevier Ltd. All rights reserved.

Infrared imagery acquisition process supporting simulation and real image training

NASA Astrophysics Data System (ADS)

O'Connor, John

2012-05-01

The increasing use of infrared sensors requires development of advanced infrared training and simulation tools to meet current Warfighter needs. In order to prepare the force, a challenge exists for training and simulation images to be both realistic and consistent with each other to be effective and avoid negative training. The US Army Night Vision and Electronic Sensors Directorate has corrected this deficiency by developing and implementing infrared image collection methods that meet the needs of both real image trainers and real-time simulations. The author presents innovative methods for collection of high-fidelity digital infrared images and the associated equipment and environmental standards. The collected images are the foundation for US Army, and USMC Recognition of Combat Vehicles (ROC-V) real image combat ID training and also support simulations including the Night Vision Image Generator and Synthetic Environment Core. The characteristics, consistency, and quality of these images have contributed to the success of these and other programs. To date, this method has been employed to generate signature sets for over 350 vehicles. The needs of future physics-based simulations will also be met by this data. NVESD's ROC-V image database will support the development of training and simulation capabilities as Warfighter needs evolve.

Implementing a robotics curriculum at an academic general surgery training program: our initial experience.

PubMed

Winder, Joshua S; Juza, Ryan M; Sasaki, Jennifer; Rogers, Ann M; Pauli, Eric M; Haluck, Randy S; Estes, Stephanie J; Lyn-Sue, Jerome R

2016-09-01

The robotic surgical platform is being utilized by a growing number of hospitals across the country, including academic medical centers. Training programs are tasked with teaching their residents how to utilize this technology. To this end, we have developed and implemented a robotic surgical curriculum, and share our initial experience here. Our curriculum was implemented for all General Surgical residents for the academic year 2014-2015. The curriculum consisted of online training, readings, bedside training, console simulation, participating in ten cases as bedside first assistant, and operating at the console. 20 surgical residents were included. Residents were provided the curriculum and notified the department upon completion. Bedside assistance and operative console training were completed in the operating room through a mix of biliary, foregut, and colorectal cases. During the fiscal years of 2014 and 2015, there were 164 and 263 robot-assisted surgeries performed within the General Surgery Department, respectively. All 20 residents completed the online and bedside instruction portions of the curriculum. Of the 20 residents trained, 13/20 (65 %) sat at the Surgeon console during at least one case. Utilizing this curriculum, we have trained and incorporated residents into robot-assisted cases in an efficient manner. A successful curriculum must be based on didactic learning, reading, bedside training, simulation, and training in the operating room. Each program must examine their caseload and resident class to ensure proper exposure to this platform.

Implementation of Joint Multi-Segment Training

NASA Technical Reports Server (NTRS)

Reagan, Marc; Smith, Wyatt; Bugrova, Skella; Silkov, Sergei

2000-01-01

The highest level of training for ISS flight is Joint Multi-Segment Training (JMST) simulations. These simulations allow two or more partners to conduct multi-segment training for their respective Mission Control Centers (MCC), include actual crew members, and usually include training facilities in each of the participating International Partner (IP) locations. It is the dress rehearsal for those events that exercise the interface between different IP modules and/or the decision making process between the different MCCs involved. This presentation will describe the challenge of successfully implementing JMST. It will start with a brief overview of who is involved, where they are located, and when JMSTs are required. Finally, it will illustrate many of the complications involved in just running a JMST between MCC-M and MCC-H. The viewer will leave with a much better appreciation for the complexities involved in successfully conducting a JMST of this nature, as well as an idea of how the picture will change as the other partners and payloads become involved.

BNSF San Bernardino case study : positive train control risk assessment.

DOT National Transportation Integrated Search

2014-09-01

The Federal Railroad Administration funded the BNSF San Bernardino Case Study to verify its Generalized Train Movement : Simulator (GTMS) risk assessment capabilities on a planned implementation of the I-ETMS PTC system. The analysis explicitly : sim...

Cockpit resource management training at People Express

NASA Technical Reports Server (NTRS)

Bruce, Keith D.; Jensen, Doug

1987-01-01

In January 1986 in a continuing effort to maintain and improve flight safety and solve some Cockpit Resource Management (CRM) problems, People Express implemented a new CRM training program. It is a continuously running program, scheduled over the next three years and includes state-of-the-art full-mission simulation (LOFT), semi-annual seminar workshops and a comprehensive academic program authored by Robert W. Mudge of Cockpit Management Resources Inc. That program is outlined and to maximize its contribution to the workshop's goals, is organized into four topic areas: (1) Program content: the essential elements of resource management training; (2) Training methods: the strengths and weaknesses of current approaches; (3) Implementation: the implementation of CRM training; and (4) Effectiveness: the effectiveness of training. It is confined as much as possible to concise descriptions of the program's basic components. Brief discussions of rationale are included, however no attempt is made to discuss or review popular CRM tenets or the supporting research.

Eight critical factors in creating and implementing a successful simulation program.

PubMed

Lazzara, Elizabeth H; Benishek, Lauren E; Dietz, Aaron S; Salas, Eduardo; Adriansen, David J

2014-01-01

Recognizing the need to minimize human error and adverse events, clinicians, researchers, administrators, and educators have strived to enhance clinicians' knowledge, skills, and attitudes through training. Given the risks inherent in learning new skills or advancing underdeveloped skills on actual patients, simulation-based training (SBT) has become an invaluable tool across the medical education spectrum. The large simulation, training, and learning literature was used to provide a synthesized yet innovative and "memorable" heuristic of the important facets of simulation program creation and implementation, as represented by eight critical "S" factors-science, staff, supplies, space, support, systems, success, and sustainability. These critical factors advance earlier work that primarily focused on the science of SBT success, to also include more practical, perhaps even seemingly obvious but significantly challenging components of SBT, such as resources, space, and supplies. SYSTEMS: One of the eight critical factors-systems-refers to the need to match fidelity requirements to training needs and ensure that technological infrastructure is in place. The type of learning objectives that the training is intended to address should determine these requirements. For example, some simulators emphasize physical fidelity to enable clinicians to practice technical and nontechnical skills in a safe environment that mirrors real-world conditions. Such simulators are most appropriate when trainees are learning how to use specific equipment or conduct specific procedures. The eight factors-science, staff, supplies, space, support, systems, success, and sustainability-represent a synthesis of the most critical elements necessary for successful simulation programs. The order of the factors does not represent a deliberate prioritization or sequence, and the factors' relative importance may change as the program evolves.

Toward the Implementation of Augmented Reality Training

ERIC Educational Resources Information Center

Mayberry, Charles R.

2013-01-01

The United States Air Force (USAF) trains C-130H Loadmaster students at Little Rock Air Force Base (AFB) through a civilian contract. The Aircrew Training System (ATS) contractor utilizes a Fuselage Trainer (FuT) to provide scenarios for the Loadmaster students to practice loading and unloading a simulated aircraft. The problem was the USAF does…

[Simulation-based training in anesthesia and emergency medicine: preparation for the unexpected: on the way to new standards of education in Germany].

PubMed

Issleib, Malte; Zöllner, C

2015-01-01

Medical expertise consists of knowledge, professional skills and individual attitudes. Training and education of this expertise starts in medical school and develops throughout the qualification process of anesthesists and emergency physicians. Medical decisions are not only rational but also intuitive. The combination of these characteristics cannot and should not be trained on patients. The implementation of modern simulation techniques offers the opportunity to train for emergency situations similar to training systems in the energy industry and aviation. Repetitive training of rare emergency situations brings routine to seldomly used procedures. In simulation training mistakes can be detected and systematically corrected. The team interactions and soft skills can also be focussed on. Video analysis gives the participant the opportunity for self-reflection and can lead to correction of individual behavior patterns. This dimension of education cannot be done in real patient care. This training goes far beyond the level of skills training. Through simulation training involves the whole team, the communication and the interaction between the team members in medically challenging situations. Crisis resource management leads to measurable improvements in patient safety and safety culture as well as personnel satisfaction.

SAGRAD: A Program for Neural Network Training with Simulated Annealing and the Conjugate Gradient Method.

PubMed

Bernal, Javier; Torres-Jimenez, Jose

2015-01-01

SAGRAD (Simulated Annealing GRADient), a Fortran 77 program for computing neural networks for classification using batch learning, is discussed. Neural network training in SAGRAD is based on a combination of simulated annealing and Møller's scaled conjugate gradient algorithm, the latter a variation of the traditional conjugate gradient method, better suited for the nonquadratic nature of neural networks. Different aspects of the implementation of the training process in SAGRAD are discussed, such as the efficient computation of gradients and multiplication of vectors by Hessian matrices that are required by Møller's algorithm; the (re)initialization of weights with simulated annealing required to (re)start Møller's algorithm the first time and each time thereafter that it shows insufficient progress in reaching a possibly local minimum; and the use of simulated annealing when Møller's algorithm, after possibly making considerable progress, becomes stuck at a local minimum or flat area of weight space. Outlines of the scaled conjugate gradient algorithm, the simulated annealing procedure and the training process used in SAGRAD are presented together with results from running SAGRAD on two examples of training data.

Virtual reality: emerging role of simulation training in vascular access.

PubMed

Davidson, Ingemar J A; Lok, Charmaine; Dolmatch, Bart; Gallieni, Maurizio; Nolen, Billy; Pittiruti, Mauro; Ross, John; Slakey, Douglas

2012-11-01

Evolving new technologies in vascular access mandate increased attention to patient safety; an often overlooked yet valuable training tool is simulation. For the end-stage renal disease patient, simulation tools are effective for all aspects of creating access for peritoneal dialysis and hemodialysis. Based on aviation principles, known as crew resource management, we place equal emphasis on team training as individual training to improve interactions between team members and systems, cumulating in improved safety. Simulation allows for environmental control and standardized procedures, letting the trainee practice and correct mistakes without harm to patients, compared with traditional patient-based training. Vascular access simulators range from suture devices, to pressurized tunneled conduits for needle cannulation, to computer-based interventional simulators. Simulation training includes simulated case learning, root cause analysis of adverse outcomes, and continual update and refinement of concepts. Implementation of effective human to complex systems interaction in end-stage renal disease patients involves a change in institutional culture. Three concepts discussed in this article are as follows: (1) the need for user-friendly systems and technology to enhance performance, (2) the necessity for members to both train and work together as a team, and (3) the team assigned to use the system must test and practice it to a proficient level before safely using the system on patients. Copyright © 2012 Elsevier Inc. All rights reserved.

Fire training in a virtual-reality environment

NASA Astrophysics Data System (ADS)

Freund, Eckhard; Rossmann, Jurgen; Bucken, Arno

2005-03-01

Although fire is very common in our daily environment - as a source of energy at home or as a tool in industry - most people cannot estimate the danger of a conflagration. Therefore it is important to train people in combating fire. Beneath training with propane simulators or real fires and real extinguishers, fire training can be performed in virtual reality, which means a pollution-free and fast way of training. In this paper we describe how to enhance a virtual-reality environment with a real-time fire simulation and visualisation in order to establish a realistic emergency-training system. The presented approach supports extinguishing of the virtual fire including recordable performance data as needed in teletraining environments. We will show how to get realistic impressions of fire using advanced particle-simulation and how to use the advantages of particles to trigger states in a modified cellular automata used for the simulation of fire-behaviour. Using particle systems that interact with cellular automata it is possible to simulate a developing, spreading fire and its reaction on different extinguishing agents like water, CO2 or oxygen. The methods proposed in this paper have been implemented and successfully tested on Cosimir, a commercial robot-and VR-simulation-system.

The effect of implementing cognitive load theory-based design principles in virtual reality simulation training of surgical skills: a randomized controlled trial.

PubMed

Andersen, Steven Arild Wuyts; Mikkelsen, Peter Trier; Konge, Lars; Cayé-Thomasen, Per; Sørensen, Mads Sølvsten

2016-01-01

Cognitive overload can inhibit learning, and cognitive load theory-based instructional design principles can be used to optimize learning situations. This study aims to investigate the effect of implementing cognitive load theory-based design principles in virtual reality simulation training of mastoidectomy. Eighteen novice medical students received 1 h of self-directed virtual reality simulation training of the mastoidectomy procedure randomized for standard instructions (control) or cognitive load theory-based instructions with a worked example followed by a problem completion exercise (intervention). Participants then completed two post-training virtual procedures for assessment and comparison. Cognitive load during the post-training procedures was estimated by reaction time testing on an integrated secondary task. Final-product analysis by two blinded expert raters was used to assess the virtual mastoidectomy performances. Participants in the intervention group had a significantly increased cognitive load during the post-training procedures compared with the control group (52 vs. 41 %, p  = 0.02). This was also reflected in the final-product performance: the intervention group had a significantly lower final-product score than the control group (13.0 vs. 15.4, p  < 0.005). Initial instruction using worked examples followed by a problem completion exercise did not reduce the cognitive load or improve the performance of the following procedures in novices. Increased cognitive load when part tasks needed to be integrated in the post-training procedures could be a possible explanation for this. Other instructional designs and methods are needed to lower the cognitive load and improve the performance in virtual reality surgical simulation training of novices.

Simulator training to automaticity leads to improved skill transfer compared with traditional proficiency-based training: a randomized controlled trial.

PubMed

Stefanidis, Dimitrios; Scerbo, Mark W; Montero, Paul N; Acker, Christina E; Smith, Warren D

2012-01-01

We hypothesized that novices will perform better in the operating room after simulator training to automaticity compared with traditional proficiency based training (current standard training paradigm). Simulator-acquired skill translates to the operating room, but the skill transfer is incomplete. Secondary task metrics reflect the ability of trainees to multitask (automaticity) and may improve performance assessment on simulators and skill transfer by indicating when learning is complete. Novices (N = 30) were enrolled in an IRB-approved, blinded, randomized, controlled trial. Participants were randomized into an intervention (n = 20) and a control (n = 10) group. The intervention group practiced on the FLS suturing task until they achieved expert levels of time and errors (proficiency), were tested on a live porcine fundoplication model, continued simulator training until they achieved expert levels on a visual spatial secondary task (automaticity) and were retested on the operating room (OR) model. The control group participated only during testing sessions. Performance scores were compared within and between groups during testing sessions. : Intervention group participants achieved proficiency after 54 ± 14 and automaticity after additional 109 ± 57 repetitions. Participants achieved better scores in the OR after automaticity training [345 (range, 0-537)] compared with after proficiency-based training [220 (range, 0-452; P < 0.001]. Simulator training to automaticity takes more time but is superior to proficiency-based training, as it leads to improved skill acquisition and transfer. Secondary task metrics that reflect trainee automaticity should be implemented during simulator training to improve learning and skill transfer.

The impact of transmural multiprofessional simulation-based obstetric team training on perinatal outcome and quality of care in the Netherlands

PubMed Central

2014-01-01

Background Perinatal mortality and morbidity in the Netherlands is relatively high compared to other European countries. Our country has a unique system with an independent primary care providing care to low-risk pregnancies and a secondary/tertiary care responsible for high-risk pregnancies. About 65% of pregnant women in the Netherlands will be referred from primary to secondary care implicating multiple medical handovers. Dutch audits concluded that in the entire obstetric collaborative network process parameters could be improved. Studies have shown that obstetric team training improves perinatal outcome and that simulation-based obstetric team training implementing crew resource management (CRM) improves team performance. In addition, deliberate practice (DP) improves medical skills. The aim of this study is to analyse whether transmural multiprofessional simulation-based obstetric team training improves perinatal outcome. Methods/Design The study will be implemented in the south-eastern part of the Netherlands with an annual delivery rate of over 9,000. In this area secondary care is provided by four hospitals. Each hospital with referring primary care practices will form a cluster (study group). Within each cluster, teams will be formed of different care providers representing the obstetric collaborative network. CRM and elements of DP will be implemented in the training. To analyse the quality of care as perceived by patients, the Pregnancy and Childbirth Questionnaire (PCQ) will be used. Furthermore, self-reported collaboration between care providers will be assessed. Team performance will be measured by the Clinical Teamwork Scale (CTS). We employ a stepped-wedge trial design with a sequential roll-out of the trainings for the different study groups. Primary outcome will be perinatal mortality and/or admission to a NICU. Secondary outcome will be team performance, quality of care as perceived by patients, and collaboration among care providers. Conclusion The effect of transmural multiprofessional simulation-based obstetric team training on perinatal outcome has never been studied. We hypothesise that this training will improve perinatal outcome, team performance, and quality of care as perceived by patients and care providers. Trial registration The Netherlands National Trial Register, http://www.trialregister.nl/NTR4576, registered June 1, 2014 PMID:25145317

Integrating simulation training into the nursing curriculum.

PubMed

Wilford, Amanda; Doyle, Thomas J

The use of simulation is gaining momentum in nurse education across the UK. The Nursing and Midwifery Council is currently investigating the use of simulation in pre-registration nursing. This article gives a brief history of simulation, discusses competence issues and why simulation is best placed to teach nurses in today's health service. An innovative approach to implementing simulation into the nursing curriculum is introduced.

Virtual reality lead extraction as a method for training new physicians: a pilot study.

PubMed

Maytin, Melanie; Daily, Thomas P; Carillo, Roger G

2015-03-01

It is estimated that the demand for transvenous lead extraction (TLE) has reached an annual extraction rate of nearly 24,000 patients worldwide. Despite technologic advances, TLE still has the potential for significant morbidity and mortality. Complication rates with TLE directly parallel operator experience. However, obtaining adequate training during and postfellowship can be difficult. Given the potential for catastrophic complications and the steep learning curve (up to 300 cases) associated with this procedure, we sought to validate a virtual reality (VR) lead extraction simulator as an innovative training and evaluation tool for physicians new to TLE. We randomized eight electrophysiology fellows to VR simulator versus conventional training. We compared procedural skill competency between the groups using simulator competency, tactile measurements, markers of proficiency and attitudes, and cognitive abilities battery. Practical skills and simulator complications differed significantly between the VR simulator and conventional training groups. The VR simulator group executed patient preparation and procedure performance better than the conventional group (P < 0.01). All four fellows randomized to conventional training experienced a simulator complication (two superior vena cava [SVC] tears, three right ventricle [RV] avulsions) versus one fellow in the VR simulator group (one SVC tear) (P = 0.02). Tactile measurements revealed a trend toward excess pushing versus pulling forces among the conventionally trained group. The time for lead removal was also significantly higher in the conventional training group (12.46 minutes vs 5.54 minutes, P = 0.02). There was no significant difference in baseline or posttraining cognitive ability. We contend that the implementation of alternative training tools such as a VR simulation model will improve physician training and allow for an innovative pathway to assess the achievement of competency. ©2014 Wiley Periodicals, Inc.

[Simulation in surgical training].

PubMed

Nabavi, A; Schipper, J

2017-01-01

Patient safety during operations hinges on the surgeon's skills and abilities. However, surgical training has come under a variety of restrictions. To acquire dexterity with decreasingly "simple" cases, within the legislative time constraints and increasing expectations for surgical results is the future challenge. Are there alternatives to traditional master-apprentice learning? A literature review and analysis of the development, implementation, and evaluation of surgical simulation are presented. Simulation, using a variety of methods, most important physical and virtual (computer-generated) models, provides a safe environment to practice basic and advanced skills without endangering patients. These environments have specific strengths and weaknesses. Simulations can only serve to decrease the slope of learning curves, but cannot be a substitute for the real situation. Thus, they have to be an integral part of a comprehensive training curriculum. Our surgical societies have to take up that challenge to ensure the training of future generations.

Proficiency-based laparoscopic and endoscopic training with virtual reality simulators: a comparison of proctored and independent approaches.

PubMed

Snyder, Christopher W; Vandromme, Marianne J; Tyra, Sharon L; Hawn, Mary T

2009-01-01

Virtual reality (VR) simulators for laparoscopy and endoscopy may be valuable tools for resident education. However, the cost of such training in terms of trainee and instructor time may vary depending upon whether an independent or proctored approach is employed. We performed a randomized controlled trial to compare independent and proctored methods of proficiency-based VR simulator training. Medical students were randomized to independent or proctored training groups. Groups were compared with respect to the number of training hours and task repetitions required to achieve expert level proficiency on laparoscopic and endoscopic simulators. Cox regression modeling was used to compare time to proficiency between groups, with adjustment for appropriate covariates. Thirty-six medical students (18 independent, 18 proctored) were enrolled. Achievement of overall simulator proficiency required a median of 11 hours of training (range, 6-21 hours). Laparoscopic and endoscopic proficiency were achieved after a median of 11 (range, 6-32) and 10 (range, 5-27) task repetitions, respectively. The number of repetitions required to achieve proficiency was similar between groups. After adjustment for covariates, trainees in the independent group achieved simulator proficiency with significantly fewer hours of training (hazard ratio, 2.62; 95% confidence interval, 1.01-6.85; p = 0.048). Our study quantifies the cost, in instructor and trainee hours, of proficiency-based laparoscopic and endoscopic VR simulator training, and suggests that proctored instruction does not offer any advantages to trainees. The independent approach may be preferable for surgical residency programs desiring to implement VR simulator training.

The Development of Dispatcher Training Simulator in a Thermal Energy Generation System

NASA Astrophysics Data System (ADS)

Hakim, D. L.; Abdullah, A. G.; Mulyadi, Y.; Hasan, B.

2018-01-01

A dispatcher training simulator (DTS) is a real-time Human Machine Interface (HMI)-based control tool that is able to visualize industrial control system processes. The present study was aimed at developing a simulator tool for boilers in a thermal power station. The DTS prototype was designed using technical data of thermal power station boilers in Indonesia. It was then designed and implemented in Wonderware Intouch 10. The resulting simulator came with component drawing, animation, control display, alarm system, real-time trend, historical trend. This application used 26 tagnames and was equipped with a security system. The test showed that the principles of real-time control worked well. It is expected that this research could significantly contribute to the development of thermal power station, particularly in terms of its application as a training simulator for beginning dispatchers.

A randomized controlled trial of simulation-based training for ear, nose, and throat emergencies.

PubMed

Smith, Matthew Edward; Navaratnam, Annakan; Jablenska, Lily; Dimitriadis, Panagiotis A; Sharma, Rishi

2015-08-01

Life-threatening ear, nose, and throat (ENT) emergencies are uncommon but require immediate skilled management. We investigated if traditional lecture-based teaching can be improved by a simulation and lecture hybrid approach. A single-blinded, prospective, randomized controlled trial. Two groups of interns with no previous ENT experience were randomized to one of two training groups: a simulation/lecture hybrid group or a lecture-only control group. Both groups received 90 minutes of training covering the assessment of critically ill patients and four ENT emergency topics. Both groups received the same initial lecture slides. The control group received additional slides, and the simulation group received simulated emergency scenario training using basic mannequins. Following the training, candidates were asked to provide feedback on their perception of training, and they were formally assessed with a standardized one-to-one viva. Thirty-eight interns were recruited: 18 in the control group and 20 in the simulation group. The candidates in the simulation group performed significantly better in all viva situations (P < .05) and had better perception of learning (P < .05). Additionally, the simulation group was more likely to recommend the training to a colleague (P < .05). We have demonstrated that replacing traditional lecture-based training with a mixture of lectures and emergency scenario simulation is more effective at preparing junior doctors for ENT emergencies, and better met their learning needs. Implementing this kind of teaching is feasible with a minimum of additional resources or time. 1b © 2015 The American Laryngological, Rhinological and Otological Society, Inc.

Using High-Technology Simulators to Prepare Anesthesia Providers Before Implementation of a New Electronic Health Record Module: A Technical Report.

PubMed

Weintraub, Ari Y; Deutsch, Ellen S; Hales, Roberta L; Buchanan, Newton A; Rock, Whitney L; Rehman, Mohamed A

2017-06-01

Learning to use a new electronic anesthesia information management system can be challenging. Documenting anesthetic events, medication administration, and airway management in an unfamiliar system while simultaneously caring for a patient with the vigilance required for safe anesthesia can be distracting and risky. This technical report describes a vendor-agnostic approach to training using a high-technology manikin in a simulated clinical scenario. Training was feasible and valued by participants but required a combination of electronic and manual components. Further exploration may reveal simulated patient care training that provides the greatest benefit to participants as well as feedback to inform electronic health record improvements.

Arthroscopic Shoulder Surgical Simulation Training Curriculum: Transfer Reliability and Maintenance of Skill Over Time.

PubMed

Dunn, John C; Belmont, Philip J; Lanzi, Joseph; Martin, Kevin; Bader, Julia; Owens, Brett; Waterman, Brian R

2015-01-01

Surgical education is evolving as work hour constraints limit the exposure of residents to the operating room. Potential consequences may include erosion of resident education and decreased quality of patient care. Surgical simulation training has become a focus of study in an effort to counter these challenges. Previous studies have validated the use of arthroscopic surgical simulation programs both in vitro and in vivo. However, no study has examined if the gains made by residents after a simulation program are retained after a period away from training. In all, 17 orthopedic surgery residents were randomized into simulation or standard practice groups. All subjects were oriented to the arthroscopic simulator, a 14-point anatomic checklist, and Arthroscopic Surgery Skill Evaluation Tool (ASSET). The experimental group received 1 hour of simulation training whereas the control group had no additional training. All subjects performed a recorded, diagnostic arthroscopy intraoperatively. These videos were scored by 2 blinded, fellowship-trained orthopedic surgeons and outcome measures were compared within and between the groups. After 1 year in which neither group had exposure to surgical simulation training, all residents were retested intraoperatively and scored in the exact same fashion. Individual surgical case logs were reviewed and surgical case volume was documented. There was no difference between the 2 groups after initial simulation testing and there was no correlation between case volume and initial scores. After training, the simulation group improved as compared with baseline in mean ASSET (p = 0.023) and mean time to completion (p = 0.01). After 1 year, there was no difference between the groups in any outcome measurements. Although individual technical skills can be cultivated with surgical simulation training, these advancements can be lost without continued education. It is imperative that residency programs implement a simulation curriculum and continue to train throughout the academic year. Published by Elsevier Inc.

High fidelity simulation based team training in urology: a preliminary interdisciplinary study of technical and nontechnical skills in laparoscopic complications management.

PubMed

Lee, Jason Y; Mucksavage, Phillip; Canales, Cecilia; McDougall, Elspeth M; Lin, Sharon

2012-04-01

Simulation based team training provides an opportunity to develop interdisciplinary communication skills and address potential medical errors in a high fidelity, low stakes environment. We evaluated the implementation of a novel simulation based team training scenario and assessed the technical and nontechnical performance of urology and anesthesiology residents. Urology residents were randomly paired with anesthesiology residents to participate in a simulation based team training scenario involving the management of 2 scripted critical events during laparoscopic radical nephrectomy, including the vasovagal response to pneumoperitoneum and renal vein injury during hilar dissection. A novel kidney surgical model and a high fidelity mannequin simulator were used for the simulation. A debriefing session followed each simulation based team training scenario. Assessments of technical and nontechnical performance were made using task specific checklists and global rating scales. A total of 16 residents participated, of whom 94% rated the simulation based team training scenario as useful for communication skill training. Also, 88% of urology residents believed that the kidney surgical model was useful for technical skill training. Urology resident training level correlated with technical performance (p=0.004) and blood loss during renal vein injury management (p=0.022) but not with nontechnical performance. Anesthesia resident training level correlated with nontechnical performance (p=0.036). Urology residents consistently rated themselves higher on nontechnical performance than did faculty (p=0.033). Anesthesia residents did not differ in the self-assessment of nontechnical performance compared to faculty assessments. Residents rated the simulation based team training scenario as useful for interdisciplinary communication skill training. Urology resident training level correlated with technical performance but not with nontechnical performance. Urology residents consistently overestimated their nontechnical performance. Copyright © 2012 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Using Simulation to Implement an OR Cardiac Arrest Crisis Checklist.

PubMed

Dagey, Darleen

2017-01-01

Crisis checklists are cognitive aids used to coordinate care during critical events. Simulation training is a method to validate process improvement initiatives such as checklist implementation. In response to concerns staff members expressed regarding their comfort level when responding to infrequent occurrences such as cardiac arrest and other OR emergencies, the OR Comprehensive Unit-based Safety Program team at our facility decided to institute the use of crisis checklists in the OR during critical events. We provided 90-minute education sessions, simulation opportunities, and debriefings to help staff members become more comfortable using these checklists. Based on program evaluations, 80% of staff members who participated in the training expressed an increased comfort level when caring for a patient in cardiac arrest. Copyright © 2017 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Virtual reality-assisted robotic surgery simulation.

PubMed

Albani, Justin M; Lee, David I

2007-03-01

For more than a decade, advancing computer technologies have allowed incorporation of virtual reality (VR) into surgical training. This has become especially important in training for laparoscopic procedures, which often are complex and leave little room for error. With the advent of robotic surgery and the development and prevalence of a commercial surgical system (da Vinci robot; Intuitive Surgical, Sunnyvale, CA), a valid VR-assisted robotic surgery simulator could minimize the steep learning curve associated with many of these complex procedures and thus enable better outcomes. To date, such simulation does not exist; however, several agencies and corporations are involved in making this dream a reality. We review the history and progress of VR simulation in surgical training, its promising applications in robotic-assisted surgery, and the remaining challenges to implementation.

Video Monitoring a Simulation-Based Quality Improvement Program in Bihar, India.

PubMed

Dyer, Jessica; Spindler, Hilary; Christmas, Amelia; Shah, Malay Bharat; Morgan, Melissa; Cohen, Susanna R; Sterne, Jason; Mahapatra, Tanmay; Walker, Dilys

2018-04-01

Simulation-based training has become an accepted clinical training andragogy in high-resource settings with its use increasing in low-resource settings. Video recordings of simulated scenarios are commonly used by facilitators. Beyond using the videos during debrief sessions, researchers can also analyze the simulation videos to quantify technical and nontechnical skills during simulated scenarios over time. Little is known about the feasibility and use of large-scale systems to video record and analyze simulation and debriefing data for monitoring and evaluation in low-resource settings. This manuscript describes the process of designing and implementing a large-scale video monitoring system. Mentees and Mentors were consented and all simulations and debriefs conducted at 320 Primary Health Centers (PHCs) were video recorded. The system design, number of video recordings, and inter-rater reliability of the coded videos were assessed. The final dataset included a total of 11,278 videos. Overall, a total of 2,124 simulation videos were coded and 183 (12%) were blindly double-coded. For the double-coded sample, the average inter-rater reliability (IRR) scores were 80% for nontechnical skills, and 94% for clinical technical skills. Among 4,450 long debrief videos received, 216 were selected for coding and all were double-coded. Data quality of simulation videos was found to be very good in terms of recorded instances of "unable to see" and "unable to hear" in Phases 1 and 2. This study demonstrates that video monitoring systems can be effectively implemented at scale in resource limited settings. Further, video monitoring systems can play several vital roles within program implementation, including monitoring and evaluation, provision of actionable feedback to program implementers, and assurance of program fidelity.

Midwifery students' experiences of simulation- and skills training.

PubMed

Lendahls, Lena; Oscarsson, Marie G

2017-03-01

In Sweden, simulation- and skills training are implemented in midwifery education in order to prepare students for clinical practice. Research regarding the use of both low to high levels of fidelity in simulation in midwifery programme is limited. The aim of this study was to explore midwifery students' experiences of simulation- and skills training. Midwifery students (n=61), at advanced level, were interviewed in 13 group interviews from 2011 to 2105. A semi-structured interview guide was used, and data were analysed by content analysis. The results are presented in four main categories: develops hands on skills and communication, power of collaborative learning, highly valued learning environment and facilitates clinical practice. The majority of students felt that the simulation- and skills training were necessary to become familiar with hands on skills. Having repetitive practices in a safe and secure environment was viewed as important, and students highly valued that mistakes could be made without fear of comprising patient safety. Student's collaboration, reflections and critical thinking increased learning ability. Simulation- and skills training created links between theory and practice, and the lecturer had an important role in providing instructions and feedback. Students felt prepared and confident before their clinical practice, and simulation- and skills training increased safety for all involved, resulting in students being more confident, as patients in clinical practice became less exposed. Furthermore, mentors were satisfied with students' basic skills. Simulation- and skills training support the development of midwifery skills. It creates links between theory and practice, which facilitates students' learning ability. Training needs to include reflections and critical thinking in order to develop their learning. The lecturer has an important role in encouraging time for reflections and creating safe environment during the skills and simulation training. Copyright © 2016 Elsevier Ltd. All rights reserved.

Workplace Simulation: An Integrated Approach to Training University Students in Professional Communication

ERIC Educational Resources Information Center

Ismail, Norhayati; Sabapathy, Chitra

2016-01-01

In the redesign of a professional communication course for real estate students, a workplace simulation was implemented, spanning the entire 12-week duration of the course. The simulation was achieved through the creation of an online company presence, the infusion of communication typically encountered in the workplace, and an intensive and…

RPA Field Simulations:Dilemma Training for Legal and Ethical Decision Making

DTIC Science & Technology

2015-11-07

Simulation  Two phases in RPA Field Simulation – classroom phase and field phase  Purpose: link theoretical understanding/ moral reasoning with...rapid, informed decision-making/ moral behavior IRREGULAR WARFARE  U.S. dominates conventional warfare, but irregular warfare falls under Things...aspects: Mental simulation of action Modify Implement Will it work? MORAL REASONING/BEHAVIOR Military-Leader Responsibility requires

Teaching Note--"Social Work Serial": Using Video-Recorded Simulated Client Sessions to Teach Social Work Practice

ERIC Educational Resources Information Center

Asakura, Kenta; Bogo, Marion; Good, Bethany; Power, Roxanne

2018-01-01

Simulation, the use of trained actors as simulated clients, has gained empirical support as an effective teaching and assessment method in social work education. The associated costs involving the use of live simulation, however, often pose a barrier and prevent less resourced schools from implementing this pedagogical approach in the classroom.…

SAGRAD: A Program for Neural Network Training with Simulated Annealing and the Conjugate Gradient Method

PubMed Central

Bernal, Javier; Torres-Jimenez, Jose

2015-01-01

SAGRAD (Simulated Annealing GRADient), a Fortran 77 program for computing neural networks for classification using batch learning, is discussed. Neural network training in SAGRAD is based on a combination of simulated annealing and Møller’s scaled conjugate gradient algorithm, the latter a variation of the traditional conjugate gradient method, better suited for the nonquadratic nature of neural networks. Different aspects of the implementation of the training process in SAGRAD are discussed, such as the efficient computation of gradients and multiplication of vectors by Hessian matrices that are required by Møller’s algorithm; the (re)initialization of weights with simulated annealing required to (re)start Møller’s algorithm the first time and each time thereafter that it shows insufficient progress in reaching a possibly local minimum; and the use of simulated annealing when Møller’s algorithm, after possibly making considerable progress, becomes stuck at a local minimum or flat area of weight space. Outlines of the scaled conjugate gradient algorithm, the simulated annealing procedure and the training process used in SAGRAD are presented together with results from running SAGRAD on two examples of training data. PMID:26958442

[Innovation in healthcare processes and patient safety using clinical simulation].

PubMed

Rojo, E; Maestre, J M; Díaz-Mendi, A R; Ansorena, L; Del Moral, I

2016-01-01

Many excellent ideas are never implemented or generalised by healthcare organisations. There are two related paradigms: thinking that individuals primarily change through accumulating knowledge, and believing that the dissemination of that knowledge within the organisation is the key element to facilitate change. As an alternative, a description and evaluation of a simulation-based inter-professional team training program conducted in a Regional Health Service to promote and facilitate change is presented. The Department of Continuing Education completed the needs assessment using the proposals presented by clinical units and management. Skills and behaviors that could be learned using simulation were selected, and all personnel from the units participating were included. Experiential learning principles based on clinical simulation and debriefing, were used for the instructional design. The Kirkpatrick model was used to evaluate the program. Objectives included: a) decision-making and teamwork skills training in high prevalence diseases with a high rate of preventable complications; b) care processes reorganisation to improve efficiency, while maintaining patient safety; and, c) implementation of new complex techniques with a long learning curve, and high preventable complications rate. Thirty clinical units organised 39 training programs in the 3 public hospitals, and primary care of the Regional Health Service during 2013-2014. Over 1,559 healthcare professionals participated, including nursing assistants, nurses and physicians. Simulation in healthcare to train inter-professional teams can promote and facilitate change in patient care, and organisational re-engineering. Copyright © 2016 SECA. Publicado por Elsevier España, S.L.U. All rights reserved.

An intelligent tutoring system for the investigation of high performance skill acquisition

NASA Technical Reports Server (NTRS)

Fink, Pamela K.; Herren, L. Tandy; Regian, J. Wesley

1991-01-01

The issue of training high performance skills is of increasing concern. These skills include tasks such as driving a car, playing the piano, and flying an aircraft. Traditionally, the training of high performance skills has been accomplished through the use of expensive, high-fidelity, 3-D simulators, and/or on-the-job training using the actual equipment. Such an approach to training is quite expensive. The design, implementation, and deployment of an intelligent tutoring system developed for the purpose of studying the effectiveness of skill acquisition using lower-cost, lower-physical-fidelity, 2-D simulation. Preliminary experimental results are quite encouraging, indicating that intelligent tutoring systems are a cost-effective means of training high performance skills.

A study to assess the influence of interprofessional point of care simulation training on safety culture in the operating theatre environment of a university teaching hospital.

PubMed

Hinde, Theresa; Gale, Thomas; Anderson, Ian; Roberts, Martin; Sice, Paul

2016-01-01

Interprofessional point of care or in situ simulation is used as a training tool in our operating theatre directorate with the aim of improving crisis behaviours. This study aimed to assess the impact of interprofessional point of care simulation on the safety culture of operating theatres. A validated Safety Attitude Questionnaire was administered to staff members before each simulation scenario and then re-administered to the same staff members after 6-12 months. Pre- and post-training Safety Attitude Questionnaire-Operating Room (SAQ-OR) scores were compared using paired sample t-tests. Analysis revealed a statistically significant perceived improvement in both safety (p < 0.001) and teamwork (p = 0.013) climate scores (components of safety culture) 6-12 months after interprofessional simulation training. A growing body of literature suggests that a positive safety culture is associated with improved patient outcomes. Our study supports the implementation of point of care simulation as a useful intervention to improve safety culture in theatres.

Development and Utility of a Piloted Flight Simulator for Icing Effects Training

NASA Technical Reports Server (NTRS)

Ratvasky, Thomas P.; Ranaudo, Richard J.; Barnhart, Billy P.; Dickes, Edward G.; Gingras, David R.

2003-01-01

A piloted flight simulator called the Ice Contamination Effects Flight Training Device (ICEFTD), which uses low cost desktop components and a generic cockpit replication is being developed. The purpose of this device is to demonstrate the effectiveness of its use for training pilots to recognize and recover from aircraft handling anomalies that result from airframe ice formations. High-fidelity flight simulation models for various baseline (non-iced) and iced configurations were developed from wind tunnel tests of a subscale DeHavilland DHC-6 Twin Otter aircraft model. These simulation models were validated with flight test data from the NASA Twin Otter Icing Research Aircraft, which included the effects of ice on wing and tail stall characteristics. These simulation models are being implemented into an ICEFTD that will provide representative aircraft characteristics due to airframe icing. Scenario-based exercises are being constructed to give an operational-flavor to the simulation. Training pilots will learn to recognize iced aircraft characteristics from the baseline, and will practice and apply appropriate recovery procedures to a handling event.

Computational models of location-invariant orthographic processing

NASA Astrophysics Data System (ADS)

Dandurand, Frédéric; Hannagan, Thomas; Grainger, Jonathan

2013-03-01

We trained three topologies of backpropagation neural networks to discriminate 2000 words (lexical representations) presented at different positions of a horizontal letter array. The first topology (zero-deck) contains no hidden layer, the second (one-deck) has a single hidden layer, and for the last topology (two-deck), the task is divided in two subtasks implemented as two stacked neural networks, with explicit word-centred letters as intermediate representations. All topologies successfully simulated two key benchmark phenomena observed in skilled human reading: transposed-letter priming and relative-position priming. However, the two-deck topology most accurately simulated the ability to discriminate words from nonwords, while containing the fewest connection weights. We analysed the internal representations after training. Zero-deck networks implement a letter-based scheme with a position bias to differentiate anagrams. One-deck networks implement a holographic overlap coding in which representations are essentially letter-based and words are linear combinations of letters. Two-deck networks also implement holographic-coding.

Simulated Order Verification and Medication Reconciliation during an Introductory Pharmacy Practice Experience.

PubMed

Metzger, Nicole L; Chesson, Melissa M; Momary, Kathryn M

2015-09-25

Objective. To create, implement, and assess a simulated medication reconciliation and an order verification activity using hospital training software. Design. A simulated patient with medication orders and home medications was built into existing hospital training software. Students in an institutional introductory pharmacy practice experience (IPPE) reconciled the patient's medications and determined whether or not to verify the inpatient orders based on his medical history and laboratory data. After reconciliation, students identified medication discrepancies and documented their rationale for rejecting inpatient orders. Assessment. For a 3-year period, the majority of students agreed the simulation enhanced their learning, taught valuable clinical decision-making skills, integrated material from previous courses, and stimulated their interest in institutional pharmacy. Overall feedback from student evaluations about the IPPE also was favorable. Conclusion. Use of existing hospital training software can affordably simulate the pharmacist's role in order verification and medication reconciliation, as well as improve clinical decision-making.

Survey of student attitudes towards digital simulation technologies at a dental school in China.

PubMed

Ren, Q; Wang, Y; Zheng, Q; Ye, L; Zhou, X D; Zhang, L L

2017-08-01

Digital simulation technologies have become widespread in healthcare education, especially in dentistry; these technologies include digital X-ray images, digital microscopes, virtual pathology slides and other types of simulation. This study aimed to assess students' attitudes towards digital simulation technologies at a large, top-ranked dental school in China, as well as find out how students compare the digital technologies with traditional training methods. In April 2015, a custom-designed questionnaire was distributed to a total of 389 students who had received digital technology and simulation-based training in West China Dental School during 2012-2014. Results of a cross-sectional survey show that most students accept digital simulation technology; they report that the technology is stimulating and facilitates self-directed and self-paced learning. These findings, together with the objective advantages of digital technology, suggest that digital simulation training offers significant potential for dental education, highlighting the need for further research and more widespread implementation. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Development and implementation of a clinical pathway approach to simulation-based training for foregut surgery

PubMed Central

Miyasaka, Kiyoyuki W; Buchholz, Joseph; LaMarra, Denise; Karakousis, Giorgos C; Aggarwal, Rajesh

2015-01-01

Introduction Contemporary demands on resident education call for integration of simulation. We designed and implemented a simulation-based curriculum for PGY1 surgery residents to teach technical and non-technical skills within a clinical pathway approach for a foregut surgical patient, from outpatient visit through surgery and post-op follow-up. Methods The three-day curriculum for groups of six residents comprises a combination of standardized patient (SP) encounters, didactic sessions, and hands-on training. The curriculum is underpinned by a summative simulation “pathway” repeated on days 1 and 3. The “pathway” is a series of simulated pre-op, intra-op, and post-op encounters following a single patient through a disease process. The resident sees an SP in clinic presenting with distal gastric cancer, then enters an operating room to perform a gastro-jejunostomy on a porcine tissue model. Finally, the resident engages in a simulated post-operative visit. All encounters are rated by faculty members and the residents themselves, using standardized assessment forms endorsed by the American Board of Surgery. Results 18 first-year residents underwent this curriculum. Faculty ratings of overall operative performance significantly improved following the three-day module. Ratings of preoperative and postoperative performance were not significantly changed in three days. Resident self-ratings significantly improved for all encounters assessed, as did reported confidence in meeting defined learning objectives. Conclusions Conventional surgical simulation training focuses on technical skills in isolation. Our novel “pathway” curriculum targets an important gap in training methodologies by placing both technical and non-technical skills in their clinical context as part of managing a surgical patient. Results indicate consistent improvements in assessments of performance as well as confidence and support its continued usage to educate surgery residents in foregut surgery. PMID:25869238

Development and validation of a virtual reality simulator: human factors input to interventional radiology training.

PubMed

Johnson, Sheena Joanne; Guediri, Sara M; Kilkenny, Caroline; Clough, Peter J

2011-12-01

This study developed and validated a virtual reality (VR) simulator for use by interventional radiologists. Research in the area of skill acquisition reports practice as essential to become a task expert. Studies on simulation show skills learned in VR can be successfully transferred to a real-world task. Recently, with improvements in technology, VR simulators have been developed to allow complex medical procedures to be practiced without risking the patient. Three studies are reported. In Study I, 35 consultant interventional radiologists took part in a cognitive task analysis to empirically establish the key competencies of the Seldinger procedure. In Study 2, 62 participants performed one simulated procedure, and their performance was compared by expertise. In Study 3, the transferability of simulator training to a real-world procedure was assessed with 14 trainees. Study I produced 23 key competencies that were implemented as performance measures in the simulator. Study 2 showed the simulator had both face and construct validity, although some issues were identified. Study 3 showed the group that had undergone simulator training received significantly higher mean performance ratings on a subsequent patient procedure. The findings of this study support the centrality of validation in the successful design of simulators and show the utility of simulators as a training device. The studies show the key elements of a validation program for a simulator. In addition to task analysis and face and construct validities, the authors highlight the importance of transfer of training in validation studies.

Implementation of team training in medical education in Denmark

PubMed Central

Ostergaard, H; Ostergaard, D; Lippert, A

2004-01-01

In the field of medicine, team training aiming at improving team skills such as leadership, communication, co-operation, and followership at the individual and the team level seems to reduce risk of serious events and therefore increase patient safety. The preferred educational method for this type of training is simulation. Team training is not, however, used routinely in the hospital. In this paper, we describe a framework for the development of a team training course based on need assessment, learning objectives, educational methods including full-scale simulation and evaluations strategies. The use of this framework is illustrated by the present multiprofessional team training in advanced cardiac life support, trauma team training and neonatal resuscitation in Denmark. The challenges of addressing all aspects of team skills, the education of the facilitators, and establishment of evaluation strategies to document the effect of the different types of training on patient safety are discussed. PMID:15465962

Implementation of team training in medical education in Denmark.

PubMed

Østergaard, H T; Østergaard, D; Lippert, A

2004-10-01

In the field of medicine, team training aiming at improving team skills such as leadership, communication, co-operation, and followership at the individual and the team level seems to reduce risk of serious events and therefore increase patient safety. The preferred educational method for this type of training is simulation. Team training is not, however, used routinely in the hospital. In this paper, we describe a framework for the development of a team training course based on need assessment, learning objectives, educational methods including full-scale simulation and evaluations strategies. The use of this framework is illustrated by the present multiprofessional team training in advanced cardiac life support, trauma team training and neonatal resuscitation in Denmark. The challenges of addressing all aspects of team skills, the education of the facilitators, and establishment of evaluation strategies to document the effect of the different types of training on patient safety are discussed.

Implementation of team training in medical education in Denmark.

PubMed

Østergaard, H T; Østergaard, D; Lippert, A

2008-10-01

In the field of medicine, team training aiming at improving team skills such as leadership, communication, co-operation, and followership at the individual and the team level seems to reduce risk of serious events and therefore increase patient safety. The preferred educational method for this type of training is simulation. Team training is not, however, used routinely in the hospital. In this paper, we describe a framework for the development of a team training course based on need assessment, learning objectives, educational methods including full-scale simulation and evaluations strategies. The use of this framework is illustrated by the present multiprofessional team training in advanced cardiac life support, trauma team training and neonatal resuscitation in Denmark. The challenges of addressing all aspects of team skills, the education of the facilitators, and establishment of evaluation strategies to document the effect of the different types of training on patient safety are discussed.

Implementation and assessment of a curriculum for bedside ultrasound training.

PubMed

Turner, Elizabeth E; Fox, J Christian; Rosen, Mark; Allen, Angela; Rosen, Sasha; Anderson, Craig

2015-05-01

This study assessed a curriculum for bedside ultrasound (US) and compared outcomes from 2 common training pathways. The program consisted of e-learning paired with expert-led hands-on training administered to pulmonary/critical care and cardiology fellows with no prior formal training in bedside US. This "simulation-based learner" group completed a survey of attitudes and confidence before and after training, and knowledge and skills were assessed after training. The surveys and scores of the simulation-based learners were compared to the scores of "experts," who were US-trained emergency physicians, and "apprentice learners," who were intensivist physicians informally trained in bedside US on the job during fellowships. There was a significant difference in the self-reported level of prior training between the groups (simulation-based learners, 2.8; apprentice learners, 3.7; experts, 4.1, on a scale of 1-5 [P= .02]) but no difference in the interest level or perceived importance of bedside US. The study curriculum was successful, as shown by scores that exceeded the comparison groups in the cardiac and pulmonary courses (cardiac: simulation-based learners, 80%; apprentice learners, 73%; experts, 62% [P= .001]; pulmonary: 84%, 75%, and 72%, respectively [P =.02]). The simulation-based learners gained confidence in skills, whereas the comparison groups lost confidence after testing (P < .005); however, the simulation-based learners gained confidence in US subject areas that were not taught (abdomen [P <.002] and miscellaneous [P =.005]). The simulation-based learner curriculum resulted in comparable or greater knowledge and confidence in each area of US versus the comparison groups. Findings of overgeneralization of confidence highlight the importance of quality assurance and supervision in bedside US training programs. © 2015 by the American Institute of Ultrasound in Medicine.

Development of algorithmic decision-making models for sea crews

NASA Astrophysics Data System (ADS)

Lisitsyna, L.; Smetyuh, N.; Ivanovskiy, N.

2018-05-01

Modern virtual simulators are multifunctional, i.e. they can be used to develop and enhance the skills as well as to control professional skills and abilities of specialists of diverse profiles under various working conditions. This study is based on the generalization of a large experience in the sphere of applying ready-made multifunctional virtual simulators (MFVS) and developing new ones for the training and retraining of the crews of the Azov-Black Sea fishing vessels. The model is implemented in the multifunctional visual simulator "Trawling and purse-seining" to train the situational awareness among navigators individually and in a team. Interviews with those who employ the graduates of the advanced training courses testify to the adequacy of this model.

Identifying Opportunities for Virtual Reality Simulation in Surgical Education: A Review of the Proceedings from the Innovation, Design, and Emerging Alliances in Surgery (IDEAS) Conference: VR Surgery.

PubMed

Olasky, Jaisa; Sankaranarayanan, Ganesh; Seymour, Neal E; Magee, J Harvey; Enquobahrie, Andinet; Lin, Ming C; Aggarwal, Rajesh; Brunt, L Michael; Schwaitzberg, Steven D; Cao, Caroline G L; De, Suvranu; Jones, Daniel B

2015-10-01

To conduct a review of the state of virtual reality (VR) simulation technology, to identify areas of surgical education that have the greatest potential to benefit from it, and to identify challenges to implementation. Simulation is an increasingly important part of surgical training. VR is a developing platform for using simulation to teach technical skills, behavioral skills, and entire procedures to trainees and practicing surgeons worldwide. Questions exist regarding the science behind the technology and most effective usage of VR simulation. A symposium was held to address these issues. Engineers, educators, and surgeons held a conference in November 2013 both to review the background science behind simulation technology and to create guidelines for its use in teaching and credentialing trainees and surgeons in practice. Several technologic challenges were identified that must be overcome in order for VR simulation to be useful in surgery. Specific areas of student, resident, and practicing surgeon training and testing that would likely benefit from VR were identified: technical skills, team training and decision-making skills, and patient safety, such as in use of electrosurgical equipment. VR simulation has the potential to become an essential piece of surgical education curriculum but depends heavily on the establishment of an agreed upon set of goals. Researchers and clinicians must collaborate to allocate funding toward projects that help achieve these goals. The recommendations outlined here should guide further study and implementation of VR simulation. © The Author(s) 2015.

Identifying Opportunities for Virtual Reality Simulation in Surgical Education: A Review of the Proceedings from the Innovation, Design, and Emerging Alliances in Surgery (IDEAS) Conference: VR Surgery

PubMed Central

Olasky, Jaisa; Sankaranarayanan, Ganesh; Seymour, Neal E.; Magee, J. Harvey; Enquobahrie, Andinet; Lin, Ming C.; Aggarwal, Rajesh; Brunt, L. Michael; Schwaitzberg, Steven D.; Cao, Caroline G. L.; De, Suvranu; Jones, Daniel B.

2015-01-01

Objectives To conduct a review of the state of virtual reality (VR) simulation technology, to identify areas of surgical education that have the greatest potential to benefit from it, and to identify challenges to implementation. Background Data Simulation is an increasingly important part of surgical training. VR is a developing platform for using simulation to teach technical skills, behavioral skills, and entire procedures to trainees and practicing surgeons worldwide. Questions exist regarding the science behind the technology and most effective usage of VR simulation. A symposium was held to address these issues. Methods Engineers, educators, and surgeons held a conference in November 2013 both to review the background science behind simulation technology and to create guidelines for its use in teaching and credentialing trainees and surgeons in practice. Results Several technologic challenges were identified that must be overcome in order for VR simulation to be useful in surgery. Specific areas of student, resident, and practicing surgeon training and testing that would likely benefit from VR were identified: technical skills, team training and decision-making skills, and patient safety, such as in use of electrosurgical equipment. Conclusions VR simulation has the potential to become an essential piece of surgical education curriculum but depends heavily on the establishment of an agreed upon set of goals. Researchers and clinicians must collaborate to allocate funding toward projects that help achieve these goals. The recommendations outlined here should guide further study and implementation of VR simulation. PMID:25925424

'Experiencing' the Unthinkable: By Simulating Emergencies, We Show Staff Members how to Deal with Them, when and if They Should Occur.

ERIC Educational Resources Information Center

Kolb, David C.

1989-01-01

Suggests staging simulated accidents for emergency planning and training. Describes planning and staging simulated accidents for outdoor programs. Offers tips on role playing and how to create imitation "wounds." Describes implementation of plan, emphasizing value of proper supervision and evaluation upon completion. (TES)

LVC Architecture Roadmap Implementation - Results of the First Two Years

DTIC Science & Technology

2012-03-01

NOTES Presented at the Simulation Interoperability Standards Organization?s (SISO) Spring Simulation Interoperability Workshop ( SIW ), 26-30 March...presented at the semi-annual Simulation Interoperability Workshops ( SIWs ) and the annual Interservice/Industry Training, Simulation & Education Conference...I/ITSEC), as well as other venues. For example, a full-day workshop on the initial progress of the effort was conducted at the 2010 Spring SIW [2

Reframing implementation as an organisational behaviour problem.

PubMed

Clay-Williams, Robyn; Braithwaite, Jeffrey

2015-01-01

The purpose of this paper is to report on a process evaluation of a randomised controlled trial (RCT) intervention study that tested the effectiveness of classroom- and simulation-based crew resource management courses, alone and in combination, and identifies organisational barriers and facilitators to implementation of team training programmes in healthcare. The RCT design consisted of a before and after study with a team training intervention. Quantitative data were gathered on utility and affective reactions to training, and on teamwork knowledge, attitudes, and behaviours of the learners. A sample of participants was interviewed at the conclusion of the study. Interview responses were analysed, alongside qualitative elements of the classroom course critique, to search for evidence, context, and facilitation clues to the implementation process. The RCT method provided scientifically robust data that supported the benefits of classroom training. Qualitative data identified a number of facilitators to implementation of team training, and shed light on some of the ways that learning was diffused throughout the organisation. Barriers to successful implementation were also identified, including hospital time and resource constraints and poor organisational communication. Quantitative randomised methods have intermittently been used to evaluate team training interventions in healthcare. Despite two decades of team training trials, however, the authors do not know as well as the authors would like what goes on inside the "black box" of such RCTs. While results are usually centred on outcomes, this study also provides insight into the context and mechanisms associated with those outcomes and identifies barriers and facilitators to successful intervention implementation.

Multidisciplinary team simulation for the operating theatre: a review of the literature.

PubMed

Tan, Shaw Boon; Pena, Guilherme; Altree, Meryl; Maddern, Guy J

2014-01-01

Analyses of adverse events inside the operating theatre has demonstrated that many errors are caused by failure in non-technical skills and teamwork. While simulation has been used successfully for teaching and improving technical skills, more recently, multidisciplinary simulation has been used for training team skills. We hypothesized that this type of training is feasible and improves team skills in the operating theatre. A systematic search of the literature for studies describing true multidisciplinary operating theatre team simulation was conducted in November and December 2012. We looked at the characteristics and outcomes of the team simulation programmes. 1636 articles were initially retrieved. Utilizing a stepwise evaluation process, 26 articles were included in the review. The studies reveal that multidisciplinary operating theatre simulation has been used to provide training in technical and non-technical skills, to help implement new techniques and technologies, and to identify latent weaknesses within a health system. Most of the studies included are descriptions of training programmes with a low level of evidence. No randomized control trial was identified. Participants' reactions to the training programme were positive in all studies; however, none of them could objectively demonstrate that skills acquired from simulation are transferred to the operating theatre or show a demonstrable benefit in patient outcomes. Multidisciplinary operating room team simulation is feasible and widely accepted by participants. More studies are required to assess the impact of this type of training on operative performance and patient safety. © 2013 Royal Australasian College of Surgeons.

Promoting cultural humility during labor and birth: putting theory into action during PRONTO obstetric and neonatal emergency training.

PubMed

Fahey, Jenifer O; Cohen, Susanna R; Holme, Francesca; Buttrick, Elizabeth S; Dettinger, Julia C; Kestler, Edgar; Walker, Dilys M

2013-01-01

Maternal and neonatal mortality in Northern Guatemala, a region with a high percentage of indigenous people, is disproportionately high. Initiatives to improve quality of care at local health facilities equipped for births, and increasing the number of births attended at these facilities will help address this problem. PRONTO (Programa de Rescate Obstétrico y Neonatal: Tratamiento Óptimo y Oportuno) is a low-tech, high-fidelity, simulation-based, provider-to-provider training in the management of obstetric and neonatal emergencies. This program has been successfully tested and implemented in Mexico. PRONTO will now be implemented in Guatemala as part of an initiative to decrease maternal and perinatal mortality. Guatemalan health authorities have requested that the training include training on cultural humility and humanized birth. This article describes the process of curricular adaptation to satisfy this request. The PRONTO team adapted the existing program through 4 steps: (a) analysis of the problem and context through a review of qualitative data and stakeholder interviews, (b) literature review and adoption of a theoretical framework regarding cultural humility and adult learning, (c) adaptation of the curriculum and design of new activities and simulations, and (d) implementation of adapted and expanded curriculum and further refinement in response to participant response.

Designing and implementing a skills program Using a clinically integrated, multi-professional approach: Using evaluation to drive curriculum change

PubMed Central

Carr, Sandra E.; Celenza, Antonio; Lake, Fiona

2009-01-01

The essential procedural skills that newly graduated doctors require are rarely defined, do not take into account pre-vocational employer expectations, and differ between Universities. This paper describes how one Faculty used local evaluation data to drive curriculum change and implement a clinically integrated, multi-professional skills program. A curriculum restructure included a review of all undergraduate procedural skills training by academic staff and clinical departments, resulting in a curriculum skills map. Undergraduate training was then linked with postgraduate expectations using the Delphi process to identify the skills requiring structured standardised training. The skills program was designed and implemented without a dedicated simulation center. This paper shows the benefits of an alternate model in which clinical integration of training and multi-professional collaboration encouraged broad ownership of a program and, in turn, impacted the clinical experience obtained. PMID:20165528

Multi-degree of freedom joystick for virtual reality simulation.

PubMed

Head, M J; Nelson, C A; Siu, K C

2013-11-01

A modular control interface and simulated virtual reality environment were designed and created in order to determine how the kinematic architecture of a control interface affects minimally invasive surgery training. A user is able to selectively determine the kinematic configuration of an input device (number, type and location of degrees of freedom) for a specific surgical simulation through the use of modular joints and constraint components. Furthermore, passive locking was designed and implemented through the use of inflated latex tubing around rotational joints in order to allow a user to step away from a simulation without unwanted tool motion. It is believed that these features will facilitate improved simulation of a variety of surgical procedures and, thus, improve surgical skills training.

Talk the Talk: Implementing a Communication Curriculum for Surgical Residents.

PubMed

Newcomb, Anna B; Trickey, Amber W; Porrey, Melissa; Wright, Jeffrey; Piscitani, Franco; Graling, Paula; Dort, Jonathan

The Accreditation Council for Graduate Medical Education milestones provide a framework of specific interpersonal and communication skills that surgical trainees should aim to master. However, training and assessment of resident nontechnical skills remains challenging. We aimed to develop and implement a curriculum incorporating interactive learning principles such as group discussion and simulation-based scenarios to formalize instruction in patient-centered communication skills, and to identify best practices when building such a program. The curriculum is presented in quarterly modules over a 2-year cycle. Using our surgical simulation center for the training, we focused on proven strategies for interacting with patients and other providers. We trained and used former patients as standardized participants (SPs) in communication scenarios. Surgical simulation center in a 900-bed tertiary care hospital. Program learners were general surgery residents (postgraduate year 1-5). Trauma Survivors Network volunteers served as SPs in simulation scenarios. We identified several important lessons: (1) designing and implementing a new curriculum is a challenging process with multiple barriers and complexities; (2) several readily available facilitators can ease the implementation process; (3) with the right approach, learners, faculty, and colleagues are enthusiastic and engaged participants; (4) learners increasingly agree that communication skills can be improved with practice and appreciate the curriculum value; (5) patient SPs can be valuable members of the team; and importantly (6) the culture of patient-physician communication appears to shift with the implementation of such a curriculum. Our approach using Trauma Survivors Network volunteers as SPs could be reproduced in other institutions with similar programs. Faculty enthusiasm and support is strong, and learner participation is active. Continued focus on patient and family communication skills would enhance patient care for institutions providing such education as well as for institutions where residents continue on in fellowships or begin their surgical practice. Copyright © 2017 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

EVATS: a proactive solution to improve surgical education and maintain flexibility in the new training era.

PubMed

Horvath, Karen D; Mann, Gary N; Pellegrini, Carlos

2006-01-01

To describe the development of the EVATS rotation. Descriptive document. University teaching hospital. Faculty and residents of the University of Washington. In July 2003 we identified the need for a new, independent, educational module within our residency training. Requirements for this rotation included dedicated time for technical skills training on simulators, independent competency learning modules, academic research project time, vacation time and coverage, and flexibility for unplanned leave (eg, interview travel, m/paternity leave). An EVATS rotation was created in July 2003 that is provided at each training level and lasts from 4 to 8 weeks depending on R-level. EVATS meets the following challenges: Emergency coverage (EVATS residents available for last-minute service coverage), vacation time/vacation coverage (2 weeks vacation + 1 week vacation coverage; this maintains vacations for all residents every 6 months), academic time (residents now must complete 1 academic project for graduation) and ACGME competency learning and assessment, and technical skills training (includes simulator work for open/lap skills). Initial implementation indices are high and include resident satisfaction, 80-hour work week compliance, academic productivity, and patient continuity of care. The 21st century brought new challenges for surgical training. Increased societal demands for skills training in a laboratory setting using simulators and the 6 ACGME competencies all require classroom-type training periods. Paradoxically, the 80-hour work week restricted the time available for these educational activities and made it more difficult for programs to accommodate resident vacations and emergencies. These challenges provided an opportunity to enhance the educational experience for our residency program. The product was the EVATS rotation. Early data after implementation are favorable.

A Comparison of Two Control Display Unit Concepts on Flight Management System Training

NASA Technical Reports Server (NTRS)

Abbott, Terence S.

1997-01-01

One of the biggest challenges for a pilot in the transition to a 'glass' cockpit is understanding the flight management system (FMS). Because of both the complex nature of the FMS and the pilot-FMS interface, a large portion of transition training is devoted to the FMS. The current study examined the impact of the primary pilot-FMS interface, the control display unit (CDU), on FMS training. Based on the hypothesis that the interface design could have a significant impact on training, an FMS simulation with two separate interfaces was developed. One interface was similar to a current-generation design, and the other was a multiwindows CDU based on graphical user interface techniques. For both application and evaluation reasons, constraints were applied to the graphical CDU design to maintain as much similarity as possible with the conventional CDU. This preliminary experiment was conducted to evaluate the interface effects on training. Sixteen pilots with no FMS experience were used in a between-subjects test. A time-compressed, airline-type FMS training environment was simulated. The subjects were trained to a fixed-time criterion, and performance was measured in a final, full-mission simulation context. This paper describes the technical approach, simulation implementation, and experimental results of this effort.

A multilingual audiometer simulator software for training purposes.

PubMed

Kompis, Martin; Steffen, Pascal; Caversaccio, Marco; Brugger, Urs; Oesch, Ivo

2012-04-01

A set of algorithms, which allows a computer to determine the answers of simulated patients during pure tone and speech audiometry, is presented. Based on these algorithms, a computer program for training in audiometry was written and found to be useful for teaching purposes. To develop a flexible audiometer simulator software as a teaching and training tool for pure tone and speech audiometry, both with and without masking. First a set of algorithms, which allows a computer to determine the answers of a simulated, hearing-impaired patient, was developed. Then, the software was implemented. Extensive use was made of simple, editable text files to define all texts in the user interface and all patient definitions. The software 'audiometer simulator' is available for free download. It can be used to train pure tone audiometry (both with and without masking), speech audiometry, measurement of the uncomfortable level, and simple simulation tests. Due to the use of text files, the user can alter or add patient definitions and all texts and labels shown on the screen. So far, English, French, German, and Portuguese user interfaces are available and the user can choose between German or French speech audiometry.

A New Design for Airway Management Training with Mixed Reality and High Fidelity Modeling.

PubMed

Shen, Yunhe; Hananel, David; Zhao, Zichen; Burke, Daniel; Ballas, Crist; Norfleet, Jack; Reihsen, Troy; Sweet, Robert

2016-01-01

Restoring airway function is a vital task in many medical scenarios. Although various simulation tools have been available for learning such skills, recent research indicated that fidelity in simulating airway management deserves further improvements. In this study, we designed and implemented a new prototype for practicing relevant tasks including laryngoscopy, intubation and cricothyrotomy. A large amount of anatomical details or landmarks were meticulously selected and reconstructed from medical scans, and 3D-printed or molded to the airway intervention model. This training model was augmented by virtually and physically presented interactive modules, which are interoperable with motion tracking and sensor data feedback. Implementation results showed that this design is a feasible approach to develop higher fidelity airway models that can be integrated with mixed reality interfaces.

Design and implementation of a proficiency-based, structured endoscopy course for medical students applying for a surgical specialty

PubMed Central

De Win, Gunter; Van Bruwaene, Siska; Allen, Christopher; De Ridder, Dirk

2013-01-01

Background Surgical simulation is becoming increasingly important in surgical education. Despite the important work done on simulators, simulator model development, and simulator assessment methodologies, there is a need for development of integrated simulators in the curriculum. In this paper, we describe the design of our evidence-based preclinical training program for medical students applying for a surgical career at the Centre for Surgical Technologies. Methods Twenty-two students participated in this training program. During their final months as medical students, they received structured, proficiency-based endoscopy training. The total amount of mentored training was 18 hours and the training was organized into three training blocks. The first block focused on psychomotor training, the second block focused on laparoscopic stitching and suturing, and the third block on laparoscopic dissection techniques and hemostasis. Deliberate practice was allowed and students had to show proficiency before proceeding to the next training block. Students’ psychomotor abilities were tested before the course and after each training block. At the beginning of their careers as surgical registrars, their performance on a laparoscopic suturing task was compared with that of registrars from the previous year who did not have this training course. Student opinions about this course were evaluated using a visual analog scale. Results All students rated the training course as useful and their psychomotor abilities improved markedly. All students performed deliberate practice, and those who participated in this course scored significantly (P < 0.0001) better on the laparoscopic suturing task than first year registrars who did not participate in this course. Conclusion Organization of a structured preclinical training program in laparoscopy for final year medical students is feasible, attractive, and successful. PMID:23901308

Rapid prototyping and AI programming environments applied to payload modeling

NASA Technical Reports Server (NTRS)

Carnahan, Richard S., Jr.; Mendler, Andrew P.

1987-01-01

This effort focused on using artificial intelligence (AI) programming environments and rapid prototyping to aid in both space flight manned and unmanned payload simulation and training. Significant problems addressed are the large amount of development time required to design and implement just one of these payload simulations and the relative inflexibility of the resulting model to accepting future modification. Results of this effort have suggested that both rapid prototyping and AI programming environments can significantly reduce development time and cost when applied to the domain of payload modeling for crew training. The techniques employed are applicable to a variety of domains where models or simulations are required.

Introduction to the EC’s Marie Curie Initial Training Network Project: The European Training Network in Digital Medical Imaging for Radiotherapy (ENTERVISION)

PubMed Central

Dosanjh, Manjit; Cirilli, Manuela; Navin, Sparsh

2015-01-01

Between 2011 and 2015, the ENTERVISION Marie Curie Initial Training Network has been training 15 young researchers from a variety of backgrounds on topics ranging from in-beam Positron Emission Tomography or Single Particle Tomography techniques, to adaptive treatment planning, optical imaging, Monte Carlo simulations and biological phantom design. This article covers the main research activities, as well as the training scheme implemented by the participating institutes, which included academia, research, and industry. PMID:26697403

Prediction of Cognitive States During Flight Simulation Using Multimodal Psychophysiological Sensing

NASA Technical Reports Server (NTRS)

Harrivel, Angela R.; Stephens, Chad L.; Milletich, Robert J.; Heinich, Christina M.; Last, Mary Carolyn; Napoli, Nicholas J.; Abraham, Nijo A.; Prinzel, Lawrence J.; Motter, Mark A.; Pope, Alan T.

2017-01-01

The Commercial Aviation Safety Team found the majority of recent international commercial aviation accidents attributable to loss of control inflight involved flight crew loss of airplane state awareness (ASA), and distraction was involved in all of them. Research on attention-related human performance limiting states (AHPLS) such as channelized attention, diverted attention, startle/surprise, and confirmation bias, has been recommended in a Safety Enhancement (SE) entitled "Training for Attention Management." To accomplish the detection of such cognitive and psychophysiological states, a broad suite of sensors was implemented to simultaneously measure their physiological markers during a high fidelity flight simulation human subject study. Twenty-four pilot participants were asked to wear the sensors while they performed benchmark tasks and motion-based flight scenarios designed to induce AHPLS. Pattern classification was employed to predict the occurrence of AHPLS during flight simulation also designed to induce those states. Classifier training data were collected during performance of the benchmark tasks. Multimodal classification was performed, using pre-processed electroencephalography, galvanic skin response, electrocardiogram, and respiration signals as input features. A combination of one, some or all modalities were used. Extreme gradient boosting, random forest and two support vector machine classifiers were implemented. The best accuracy for each modality-classifier combination is reported. Results using a select set of features and using the full set of available features are presented. Further, results are presented for training one classifier with the combined features and for training multiple classifiers with features from each modality separately. Using the select set of features and combined training, multistate prediction accuracy averaged 0.64 +/- 0.14 across thirteen participants and was significantly higher than that for the separate training case. These results support the goal of demonstrating simultaneous real-time classification of multiple states using multiple sensing modalities in high fidelity flight simulators. This detection is intended to support and inform training methods under development to mitigate the loss of ASA and thus reduce accidents and incidents.

Use of a Novel Airway Kit and Simulation in Resident Training on Emergent Pediatric Airways.

PubMed

Melzer, Jonathan M; Hamersley, Erin R S; Gallagher, Thomas Q

2017-06-01

Objective Development of a novel pediatric airway kit and implementation with simulation to improve resident response to emergencies with the goal of improving patient safety. Methods Prospective study with 9 otolaryngology residents (postgraduate years 1-5) from our tertiary care institution. Nine simulated pediatric emergency airway drills were carried out with the existing system and a novel portable airway kit. Response times and time to successful airway control were noted with both the extant airway system and the new handheld kit. Results were analyzed to ensure parametric data and compared with t tests. A Bonferroni adjustment indicated that an alpha of 0.025 was needed for significance. Results Use of the airway kit significantly reduced the mean time of resident arrival by 47% ( P = .013) and mean time of successful intubation by 50% ( P = .007). Survey data indicated 100% improved resident comfort with emergent airway scenarios with use of the kit. Discussion Times to response and meaningful intervention were significantly reduced with implementation of the handheld airway kit. Use of simulation training to implement the new kit improved residents' comfort and airway skills. This study describes an affordable novel mobile airway kit and demonstrates its ability to improve response times. Implications for Practice The low cost of this airway kit makes it a tenable option even for smaller hospitals. Simulation provides a safe and effective way to familiarize oneself with novel equipment, and, when possible, realistic emergent airway simulations should be used to improve provider performance.

The Evolution of On-Board Emergency Training for the International Space Station Crew

NASA Technical Reports Server (NTRS)

LaBuff, Skyler

2015-01-01

The crew of the International Space Station (ISS) receives extensive ground-training in order to safely and effectively respond to any potential emergency event while on-orbit, but few people realize that their training is not concluded when they launch into space. The evolution of the emergency On- Board Training events (OBTs) has recently moved from paper "scripts" to an intranet-based software simulation that allows for the crew, as well as the flight control teams in Mission Control Centers across the world, to share in an improved and more realistic training event. This emergency OBT simulator ensures that the participants experience the training event as it unfolds, completely unaware of the type, location, or severity of the simulated emergency until the scenario begins. The crew interfaces with the simulation software via iPads that they keep with them as they translate through the ISS modules, receiving prompts and information as they proceed through the response. Personnel in the control centers bring up the simulation via an intranet browser at their console workstations, and can view additional telemetry signatures in simulated ground displays in order to assist the crew and communicate vital information to them as applicable. The Chief Training Officers and emergency instructors set the simulation in motion, choosing the type of emergency (rapid depressurization, fire, or toxic atmosphere) and specific initial conditions to emphasize the desired training objectives. Project development, testing, and implementation was a collaborative effort between ISS emergency instructors, Chief Training Officers, Flight Directors, and the Crew Office using commercial off the shelf (COTS) hardware along with simulation software created in-house. Due to the success of the Emergency OBT simulator, the already-developed software has been leveraged and repurposed to develop a new emulator used during fire response ground-training to deliver data that the crew receives from the handheld Compound Specific Analyzer for Combustion Products (CSA-CP). This CSA-CP emulator makes use of a portion of codebase from the Emergency OBT simulator dealing with atmospheric contamination during fire scenarios, and feeds various data signatures to crew via an iPod Touch with a flight-like CSA-CP display. These innovative simulations, which make use of COTS hardware with custom in-house software, have yielded drastic improvements to emergency training effectiveness and risk reduction for ISS crew and flight control teams during on-orbit and ground training events.

A simulation and video-based training program to address adverse childhood experiences.

PubMed

Wen, Frances K; Miller-Cribbs, Julie E; Coon, Kim A; Jelley, Martina J; Foulks-Rodriguez, Kristin A

2017-05-01

Adverse childhood experiences (ACEs) are 10 categories of childhood abuse and maltreatment, which have a dose-response relationship with common adult health concerns seen in primary care including health risk behaviors, chronic disease, and mental illness. Many of the ACEs-associated biopsychosocial risk factors are modifiable. However, physicians may not address these issues for fear of opening "Pandora's Box", that is, a source of extensive problems for which they are not sufficiently prepared with training, resources, or time. Residents need training in how to conduct trauma-focused conversations within the limited scope of an office visit. To address this need, a 4-hour simulation and video-based training program was developed for primary care residents about how to conduct brief interventions connecting their patients' current health concerns with their experiences of ACEs. Resident participants have evaluated this program as preparatory for real-life encounters and as being designed to allow for educational mastery. This article describes a workshop presenting this training program which was given at the 37th Annual Behavioral Science Forum in Family Medicine. Five skills targeted in the program were presented and a demonstration was made of the components, that is, didactics, provider and patient videos, simulated patient encounters, trainee feedback, and facilitated discussion that encompasses targeted skills, clinical implementation, and self-care. Companion tools were shared, including the syllabus, evaluation rubric, and provider and patient resources. Participants practiced trainee feedback and discussed the challenges in implementation.

An Interprofessional Approach to Continuing Education With Mass Casualty Simulation: Planning and Execution.

PubMed

Saber, Deborah A; Strout, Kelley; Caruso, Lisa Swanson; Ingwell-Spolan, Charlene; Koplovsky, Aiden

2017-10-01

Many natural and man-made disasters require the assistance from teams of health care professionals. Knowing that continuing education about disaster simulation training is essential to nursing students, nurses, and emergency first responders (e.g., emergency medical technicians, firefighters, police officers), a university in the northeastern United States planned and implemented an interprofessional mass casualty incident (MCI) disaster simulation using the Project Management Body of Knowledge (PMBOK) management framework. The school of nursing and University Volunteer Ambulance Corps (UVAC) worked together to simulate a bus crash with disaster victim actors to provide continued education for community first responders and train nursing students on the MCI process. This article explains the simulation activity, planning process, and achieved outcomes. J Contin Educ Nurs. 2017;48(10):447-453. Copyright 2017, SLACK Incorporated.

Business Simulation Training in Information Technology Education: Guidelines for New Approaches in IT Training

ERIC Educational Resources Information Center

Leger, Pierre-Majorique; Charland, Patrick; Feldstein, Harvey D.; Robert, Jacques; Babin, Gilbert; Lyle, Derick

2011-01-01

Enterprise Resource Planning (ERP) systems are commercial software packages that enable the integration of transactions-oriented data and business processes throughout an organization. Most of the world's largest organizations have already adopted an ERP system, and many mid-size organizations are turning to them as well. The implementation of an…

Functional Design of an Automated Instructional Support System for Operational Flight Trainers. Final Report, June 1976 through September 1977.

ERIC Educational Resources Information Center

Semple, Clarence A.; And Others

Functional requirements for a highly automated, flexible, instructional support system for aircrew training simulators are presented. Automated support modes and associated features and capabilities are described, along with hardware and software functional requirements for implementing a baseline system in an operational flight training context.…

Understanding adolescent development: implications for driving safety.

PubMed

Keating, Daniel P

2007-01-01

The implementation of Graduated Driver Licensing (GDL) programs has significantly improved the crash and fatality rates of novice teen drivers, but these rates remain unacceptably high. A review of adolescent development research was undertaken to identify potential areas of improvement. Research support for GDL was found to be strong, particularly regarding early acquisition of expertise in driving safety (beyond driving skill), and to limitations that reduce opportunities for distraction. GDL regimes are highly variable, and no US jurisdictions have implemented optimal regimes. Expanding and improving GDL to enhance acquisition of expertise and self-regulation are indicated for implementation and for applied research. Driver training that effectively incorporates safety goals along with driving skill is another target. The insurance industry will benefit from further GDL enhancements. Benefits may accrue to improved driver training, improved simulation devices during training, and automated safety feedback instrumentation.

Haptic control of a pneumatic muscle actuator to provide resistance for simulated isokinetic exercise; part II: control development and testing.

PubMed

Hall, Kara L; Phillips, Chandler A; Reynolds, David B; Mohler, Stanley R; Rogers, Dana B; Neidhard-Doll, Amy T

2015-01-01

Pneumatic muscle actuators (PMAs) have a high power to weight ratio and possess unique characteristics which make them ideal actuators for applications involving human interaction. PMAs are difficult to control due to nonlinear dynamics, presenting challenges in system implementation. Despite these challenges, PMAs have great potential as a source of resistance for strength training and rehabilitation. The objective of this work was to control a PMA for use in isokinetic exercise, potentially benefiting anyone in need of optimal strength training through a joint's range of motion. The controller, based on an inverse three-element phenomenological model and adaptive nonlinear control, allows the system to operate as a type of haptic device. A human quadriceps dynamic simulator was developed (as described in Part I of this work) so that control effectiveness and accommodation could be tested prior to human implementation. Tracking error results indicate that the control system is effective at producing PMA displacement and resistance necessary for a scaled, simulated neuromuscular actuator to maintain low-velocity isokinetic movement during simulated concentric and eccentric knee extension.

Virtual reality: teaching tool of the twenty-first century?

PubMed

Hoffman, H; Vu, D

1997-12-01

Virtual reality (VR) is gaining recognition for its enormous educational potential. While not yet in the mainstream of academic medical training, many prototype and first-generation VR applications are emerging, with target audiences ranging from first- and second-year medical students to residents in advanced clinical training. Visualization tools that take advantage of VR technologies are being designed to provide engaging and intuitive environments for learning visually and spatially complex topics such as human anatomy, biochemistry, and molecular biology. These applications present dynamic, three-dimensional views of structures and their spatial relationships, enabling users to move beyond "real-world" experiences by interacting with or altering virtual objects in ways that would otherwise be difficult or impossible. VR-based procedural and surgical simulations, often compared with flight simulators in aviation, hold significant promise for revolutionizing medical training. Already a wide range of simulations, representing diverse content areas and utilizing a variety of implementation strategies, are either under development or in their early implementation stages. These new systems promise to make broad-based training experiences available for students at all levels, without the risks and ethical concerns typically associated with using animal and human subjects. Medical students could acquire proficiency and gain confidence in the ability to perform a wide variety of techniques long before they need to use them clinically. Surgical residents could rehearse and refine operative procedures, using an unlimited pool of virtual patients manifesting a wide range of anatomic variations, traumatic wounds, and disease states. Those simulated encounters, in combination with existing opportunities to work with real patients, could increase the depth and breadth of learners' exposure to medical problems, ensure uniformity of training experiences, and enhance the acquisition of clinical skills.

Development and implementation of centralized simulation training: evaluation of feasibility, acceptability and construct validity.

PubMed

Shamim Khan, Mohammad; Ahmed, Kamran; Gavazzi, Andrea; Gohil, Rishma; Thomas, Libby; Poulsen, Johan; Ahmed, Munir; Jaye, Peter; Dasgupta, Prokar

2013-03-01

WHAT'S KNOWN ON THE SUBJECT? AND WHAT DOES THE STUDY ADD?: A competent urologist should not only have effective technical skills, but also other attributes that would make him/her a complete surgeon. These include team-working, communication and decision-making skills. Although evidence for effectiveness of simulation exists for individual simulators, there is a paucity of evidence for utility and effectiveness of these simulators in training programmes that aims to combine technical and non-technical skills training. This article explains the process of development and validation of a centrally coordinated simulation program (Participants - South-East Region Specialist Registrars) under the umbrella of the British Association for Urological Surgeons (BAUS) and the London Deanery. This program incorporated training of both technical (synthetic, animal and virtual reality models) and non-technical skills (simulated operating theatres). To establish the feasibility and acceptability of a centralized, simulation-based training-programme. Simulation is increasingly establishing its role in urological training, with two areas that are relevant to urologists: (i) technical skills and (ii) non-technical skills. For this London Deanery supported pilot Simulation and Technology enhanced Learning Initiative (STeLI) project, we developed a structured multimodal simulation training programme. The programme incorporated: (i) technical skills training using virtual-reality simulators (Uro-mentor and Perc-mentor [Symbionix, Cleveland, OH, USA], Procedicus MIST-Nephrectomy [Mentice, Gothenburg, Sweden] and SEP Robotic simulator [Sim Surgery, Oslo, Norway]); bench-top models (synthetic models for cystocopy, transurethral resection of the prostate, transurethral resection of bladder tumour, ureteroscopy); and a European (Aalborg, Denmark) wet-lab training facility; as well as (ii) non-technical skills/crisis resource management (CRM), using SimMan (Laerdal Medical Ltd, Orpington, UK) to teach team-working, decision-making and communication skills. The feasibility, acceptability and construct validity of these training modules were assessed using validated questionnaires, as well as global and procedure/task-specific rating scales. In total 33, three specialist registrars of different grades and five urological nurses participated in the present study. Construct-validity between junior and senior trainees was significant. Of the participants, 90% rated the training models as being realistic and easy to use. In total 95% of the participants recommended the use of simulation during surgical training, 95% approved the format of the teaching by the faculty and 90% rated the sessions as well organized. A significant number of trainees (60%) would like to have easy access to a simulation facility to allow more practice and enhancement of their skills. A centralized simulation programme that provides training in both technical and non-technical skills is feasible. It is expected to improve the performance of future surgeons in a simulated environment and thus improve patient safety. © 2012 BJU International.

Robotic surgery basic skills training: Evaluation of a pilot multidisciplinary simulation-based curriculum

PubMed Central

Foell, Kirsten; Finelli, Antonio; Yasufuku, Kazuhiro; Bernardini, Marcus Q.; Waddell, Thomas K.; Pace, Kenneth T.; Honey, R. John D.’A.; Lee, Jason Y.

2013-01-01

Purpose: Simulation-based training improves clinical skills, while minimizing the impact of the educational process on patient care. We present results of a pilot multidisciplinary, simulation-based robotic surgery basic skills training curriculum (BSTC) for robotic novices. Methods: A 4-week, simulation-based, robotic surgery BSTC was offered to the Departments of Surgery and Obstetrics & Gynecology (ObGyn) at the University of Toronto. The course consisted of various instructional strategies: didactic lecture, self-directed online-training modules, introductory hands-on training with the da Vinci robot (dVR) (Intuitive Surgical Inc., Sunnyvale, CA), and dedicated training on the da Vinci Skills Simulator (Intuitive Surgical Inc., Sunnyvale, CA) (dVSS). A third of trainees participated in competency-based dVSS training, all others engaged in traditional time-based training. Pre- and post-course skill testing was conducted on the dVR using 2 standardized skill tasks: ring transfer (RT) and needle passing (NP). Retention of skills was assessed at 5 months post-BSTC. Results: A total of 37 participants completed training. The mean task completion time and number of errors improved significantly post-course on both RT (180.6 vs. 107.4 sec, p < 0.01 and 3.5 vs. 1.3 sec, p < 0.01, respectively) and NP (197.1 vs. 154.1 sec, p < 0.01 and 4.5 vs. 1.8 sec, p = 0.04, respectively) tasks. No significant difference in performance was seen between specialties. Competency-based training was associated with significantly better post-course performance. The dVSS demonstrated excellent face validity. Conclusions: The implementation of a pilot multidisciplinary, simulation-based robotic surgery BSTC revealed significantly improved basic robotic skills among novice trainees, regardless of specialty or level of training. Competency-based training was associated with significantly better acquisition of basic robotic skills. PMID:24381662

Computer-generated forces in distributed interactive simulation

NASA Astrophysics Data System (ADS)

Petty, Mikel D.

1995-04-01

Distributed Interactive Simulation (DIS) is an architecture for building large-scale simulation models from a set of independent simulator nodes communicating via a common network protocol. DIS is most often used to create a simulated battlefield for military training. Computer Generated Forces (CGF) systems control large numbers of autonomous battlefield entities in a DIS simulation using computer equipment and software rather than humans in simulators. CGF entities serve as both enemy forces and supplemental friendly forces in a DIS exercise. Research into various aspects of CGF systems is ongoing. Several CGF systems have been implemented.

What the Logs Can Tell You: Mediation to Implement Feedback in Training

NASA Technical Reports Server (NTRS)

Maluf, David; Wiederhold, Gio; Abou-Khalil, Ali; Norvig, Peter (Technical Monitor)

2000-01-01

The problem addressed by Mediation to Implement Feedback in Training (MIFT) is to customize the feedback from training exercizes by exploiting knowledge about the training scenario, training objectives, and specific student/teacher needs. We achieve this by inserting an intelligent mediation layer into the information flow from observations collected during training exercises to the display and user interface. Knowledge about training objectives, scenarios, and tasks is maintained in the mediating layer. A designer constraint is that domain experts must be able to extend mediators by adding domain-specific knowledge that supports additional aggregations, abstractions, and views of the results of training exercises. The MIFT mediation concept is intended to be integrated with existing military training exercise management tools and reduce the cost of developing and maintaining separate feedback and evaluation tools for every training simulator and every set of customer needs. The MIFT Architecture is designed as a set of independently reusable components which interact with each other through standardized formalisms such as the Knowledge Interchange Format (KIF) and Knowledge Query and Manipulation Language (KQML).

Neural network computer simulation of medical aerosols.

PubMed

Richardson, C J; Barlow, D J

1996-06-01

Preliminary investigations have been conducted to assess the potential for using artificial neural networks to simulate aerosol behaviour, with a view to employing this type of methodology in the evaluation and design of pulmonary drug-delivery systems. Details are presented of the general purpose software developed for these tasks; it implements a feed-forward back-propagation algorithm with weight decay and connection pruning, the user having complete run-time control of the network architecture and mode of training. A series of exploratory investigations is then reported in which different network structures and training strategies are assessed in terms of their ability to simulate known patterns of fluid flow in simple model systems. The first of these involves simulations of cellular automata-generated data for fluid flow through a partially obstructed two-dimensional pipe. The artificial neural networks are shown to be highly successful in simulating the behaviour of this simple linear system, but with important provisos relating to the information content of the training data and the criteria used to judge when the network is properly trained. A second set of investigations is then reported in which similar networks are used to simulate patterns of fluid flow through aerosol generation devices, using training data furnished through rigorous computational fluid dynamics modelling. These more complex three-dimensional systems are modelled with equal success. It is concluded that carefully tailored, well trained networks could provide valuable tools not just for predicting but also for analysing the spatial dynamics of pharmaceutical aerosols.

Statistically Modeling I-V Characteristics of CNT-FET with LASSO

NASA Astrophysics Data System (ADS)

Ma, Dongsheng; Ye, Zuochang; Wang, Yan

2017-08-01

With the advent of internet of things (IOT), the need for studying new material and devices for various applications is increasing. Traditionally we build compact models for transistors on the basis of physics. But physical models are expensive and need a very long time to adjust for non-ideal effects. As the vision for the application of many novel devices is not certain or the manufacture process is not mature, deriving generalized accurate physical models for such devices is very strenuous, whereas statistical modeling is becoming a potential method because of its data oriented property and fast implementation. In this paper, one classical statistical regression method, LASSO, is used to model the I-V characteristics of CNT-FET and a pseudo-PMOS inverter simulation based on the trained model is implemented in Cadence. The normalized relative mean square prediction error of the trained model versus experiment sample data and the simulation results show that the model is acceptable for digital circuit static simulation. And such modeling methodology can extend to general devices.

Development and implementation of a clinical pathway approach to simulation-based training for foregut surgery.

PubMed

Miyasaka, Kiyoyuki W; Buchholz, Joseph; LaMarra, Denise; Karakousis, Giorgos C; Aggarwal, Rajesh

2015-01-01

Contemporary demands on resident education call for integration of simulation. We designed and implemented a simulation-based curriculum for Post Graduate Year 1 surgery residents to teach technical and nontechnical skills within a clinical pathway approach for a foregut surgery patient, from outpatient visit through surgery and postoperative follow-up. The 3-day curriculum for groups of 6 residents comprises a combination of standardized patient encounters, didactic sessions, and hands-on training. The curriculum is underpinned by a summative simulation "pathway" repeated on days 1 and 3. The "pathway" is a series of simulated preoperative, intraoperative, and postoperative encounters in following up a single patient through a disease process. The resident sees a standardized patient in the clinic presenting with distal gastric cancer and then enters an operating room to perform a gastrojejunostomy on a porcine tissue model. Finally, the resident engages in a simulated postoperative visit. All encounters are rated by faculty members and the residents themselves, using standardized assessment forms endorsed by the American Board of Surgery. A total of 18 first-year residents underwent this curriculum. Faculty ratings of overall operative performance significantly improved following the 3-day module. Ratings of preoperative and postoperative performance were not significantly changed in 3 days. Resident self-ratings significantly improved for all encounters assessed, as did reported confidence in meeting the defined learning objectives. Conventional surgical simulation training focuses on technical skills in isolation. Our novel "pathway" curriculum targets an important gap in training methodologies by placing both technical and nontechnical skills in their clinical context as part of managing a surgical patient. Results indicate consistent improvements in assessments of performance as well as confidence and support its continued usage to educate surgery residents in foregut surgery. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Implementation of Headtracking and 3D Stereo with Unity and VRPN for Computer Simulations

NASA Technical Reports Server (NTRS)

Noyes, Matthew A.

2013-01-01

This paper explores low-cost hardware and software methods to provide depth cues traditionally absent in monocular displays. The use of a VRPN server in conjunction with a Microsoft Kinect and/or Nintendo Wiimote to provide head tracking information to a Unity application, and NVIDIA 3D Vision for retinal disparity support, is discussed. Methods are suggested to implement this technology with NASA's EDGE simulation graphics package, along with potential caveats. Finally, future applications of this technology to astronaut crew training, particularly when combined with an omnidirectional treadmill for virtual locomotion and NASA's ARGOS system for reduced gravity simulation, are discussed.

Spacelab simulation using a Lear Jet aircraft: Mission no. 4 (ASSESS program)

NASA Technical Reports Server (NTRS)

Reller, J. O., Jr.; Neel, C. B.; Mason, R. H.

1975-01-01

The fourth ASSESS Spacelab simulation mission utilizing a Lear Jet aircraft featured trained experiment operators (EOs) in place of the participating scientists, to simulate the role and functions of payload specialists in Spacelab who may conduct experiments developed by other scientists. The experiment was a broadband infrared photometer coupled to a 30-cm, open port, IR telescope. No compromises in equipment design or target selection were made to simplify operator tasks; the science goals of the mission were selected to advance the mainline research program of the principle investigator (PI). Training of the EOs was the responsibility of the PI team and consisted of laboratory sessions, on-site training during experiment integration, and integrated mission training using the aircraft as a high-fidelity simulator. The EO permission experience in these several disciplines proved adequate for normal experiment operations, but marginal for the identification and remedy of equipment malfunctions. During the mission, the PI utilized a TV communication system to assist the EOs to overcome equipment difficulties; both science and operations were successfully implemented.

An intersubject variable regional anesthesia simulator with a virtual patient architecture.

PubMed

Ullrich, Sebastian; Grottke, Oliver; Fried, Eduard; Frommen, Thorsten; Liao, Wei; Rossaint, Rolf; Kuhlen, Torsten; Deserno, Thomas M

2009-11-01

The main purpose is to provide an intuitive VR-based training environment for regional anesthesia (RA). The research question is how to process subject-specific datasets, organize them in a meaningful way and how to perform the simulation for peripheral regions. We propose a flexible virtual patient architecture and methods to process datasets. Image acquisition, image processing (especially segmentation), interactive nerve modeling and permutations (nerve instantiation) are described in detail. The simulation of electric impulse stimulation and according responses are essential for the training of peripheral RA and solved by an approach based on the electric distance. We have created an XML-based virtual patient database with several subjects. Prototypes of the simulation are implemented and run on multimodal VR hardware (e.g., stereoscopic display and haptic device). A first user pilot study has confirmed our approach. The virtual patient architecture enables support for arbitrary scenarios on different subjects. This concept can also be used for other simulators. In future work, we plan to extend the simulation and conduct further evaluations in order to provide a tool for routine training for RA.

Learn, see, practice, prove, do, maintain: an evidence-based pedagogical framework for procedural skill training in medicine.

PubMed

Sawyer, Taylor; White, Marjorie; Zaveri, Pavan; Chang, Todd; Ades, Anne; French, Heather; Anderson, JoDee; Auerbach, Marc; Johnston, Lindsay; Kessler, David

2015-08-01

Acquisition of competency in procedural skills is a fundamental goal of medical training. In this Perspective, the authors propose an evidence-based pedagogical framework for procedural skill training. The framework was developed based on a review of the literature using a critical synthesis approach and builds on earlier models of procedural skill training in medicine. The authors begin by describing the fundamentals of procedural skill development. Then, a six-step pedagogical framework for procedural skills training is presented: Learn, See, Practice, Prove, Do, and Maintain. In this framework, procedural skill training begins with the learner acquiring requisite cognitive knowledge through didactic education (Learn) and observation of the procedure (See). The learner then progresses to the stage of psychomotor skill acquisition and is allowed to deliberately practice the procedure on a simulator (Practice). Simulation-based mastery learning is employed to allow the trainee to prove competency prior to performing the procedure on a patient (Prove). Once competency is demonstrated on a simulator, the trainee is allowed to perform the procedure on patients with direct supervision, until he or she can be entrusted to perform the procedure independently (Do). Maintenance of the skill is ensured through continued clinical practice, supplemented by simulation-based training as needed (Maintain). Evidence in support of each component of the framework is presented. Implementation of the proposed framework presents a paradigm shift in procedural skill training. However, the authors believe that adoption of the framework will improve procedural skill training and patient safety.

The design of scenario-based training from the resilience engineering perspective: a study with grid electricians.

PubMed

Saurin, Tarcisio Abreu; Wachs, Priscila; Righi, Angela Weber; Henriqson, Eder

2014-07-01

Although scenario-based training (SBT) can be an effective means to help workers develop resilience skills, it has not yet been analyzed from the resilience engineering (RE) perspective. This study introduces a five-stage method for designing SBT from the RE view: (a) identification of resilience skills, work constraints and actions for re-designing the socio-technical system; (b) design of template scenarios, allowing the simulation of the work constraints and the use of resilience skills; (c) design of the simulation protocol, which includes briefing, simulation and debriefing; (d) implementation of both scenarios and simulation protocol; and (e) evaluation of the scenarios and simulation protocol. It is reported how the method was applied in an electricity distribution company, in order to train grid electricians. The study was framed as an application of design science research, and five research outputs are discussed: method, constructs, model of the relationships among constructs, instantiations of the method, and theory building. Concerning the last output, the operationalization of the RE perspective on three elements of SBT is presented: identification of training objectives; scenario design; and debriefing. Copyright © 2013 Elsevier Ltd. All rights reserved.

48 CFR 1852.228-76 - Cross-waiver of liability for space station activities.

Code of Federal Regulations, 2010 CFR

2010-10-01

... product or process except when such development is for Space Station-related activities in implementation...) All activities related to ground support, test, training, simulation, or guidance and control...

Mixed reality ventriculostomy simulation: experience in neurosurgical residency.

PubMed

Hooten, Kristopher G; Lister, J Richard; Lombard, Gwen; Lizdas, David E; Lampotang, Samsun; Rajon, Didier A; Bova, Frank; Murad, Gregory J A

2014-12-01

Medicine and surgery are turning toward simulation to improve on limited patient interaction during residency training. Many simulators today use virtual reality with augmented haptic feedback with little to no physical elements. In a collaborative effort, the University of Florida Department of Neurosurgery and the Center for Safety, Simulation & Advanced Learning Technologies created a novel "mixed" physical and virtual simulator to mimic the ventriculostomy procedure. The simulator contains all the physical components encountered for the procedure with superimposed 3-D virtual elements for the neuroanatomical structures. To introduce the ventriculostomy simulator and its validation as a necessary training tool in neurosurgical residency. We tested the simulator in more than 260 residents. An algorithm combining time and accuracy was used to grade performance. Voluntary postperformance surveys were used to evaluate the experience. Results demonstrate that more experienced residents have statistically significant better scores and completed the procedure in less time than inexperienced residents. Survey results revealed that most residents agreed that practice on the simulator would help with future ventriculostomies. This mixed reality simulator provides a real-life experience, and will be an instrumental tool in training the next generation of neurosurgeons. We have now implemented a standard where incoming residents must prove efficiency and skill on the simulator before their first interaction with a patient.

Proposing a New Framework and an Innovative Approach to Teaching Reengineering and ERP Implementation Concepts

ERIC Educational Resources Information Center

Pellerin, Robert; Hadaya, Pierre

2008-01-01

Recognizing the need to teach ERP implementation and business process reengineering (BPR) concepts simultaneously, as well as the pedagogical limitations of the case teaching method and simulation tools, the objective of this study is to propose a new framework and an innovative teaching approach to improve the ERP training experience for IS…

Mobile Simulation Unit: taking simulation to the surgical trainee.

PubMed

Pena, Guilherme; Altree, Meryl; Babidge, Wendy; Field, John; Hewett, Peter; Maddern, Guy

2015-05-01

Simulation-based training has become an increasingly accepted part of surgical training. However, simulators are still not widely available to surgical trainees. Some factors that hinder the widespread implementation of simulation-based training are the lack of standardized methods and equipment, costs and time constraints. We have developed a Mobile Simulation Unit (MSU) that enables trainees to access modern simulation equipment tailored to the needs of the learner at the trainee's workplace. From July 2012 to December 2012, the MSU visited six hospitals in South Australia, four in metropolitan and two in rural areas. Resident Medical Officers, surgical trainees, Fellows and International Medical Graduates were invited to voluntarily utilize a variety of surgical simulators on offer. Participants were asked to complete a survey about the accessibility of simulation equipment at their workplace, environment of the MSU, equipment available and instruction received. Utilization data were collected. The MSU was available for a total of 303 h over 52 days. Fifty-five participants were enrolled in the project and each spent on average 118 min utilizing the simulators. The utilization of the total available time was 36%. Participants reported having a poor access to simulation at their workplace and overwhelmingly gave positive feedback regarding their experience in the MSU. The use of the MSU to provide simulation-based education in surgery is feasible and practical. The MSU provides consistent simulation training at the surgical trainee's workplace, regardless of geographic location, and it has the potential to increase participation in simulation programmes. © 2014 Royal Australasian College of Surgeons.

Development and psychometric evaluation of the "Neurosurgical Evaluation of Attitudes towards simulation Training" (NEAT) tool for use in neurosurgical education and training.

PubMed

Kirkman, Matthew A; Muirhead, William; Nandi, Dipankar; Sevdalis, Nick

2014-01-01

Neurosurgical simulation training is becoming increasingly popular. Attitudes toward simulation among residents can contribute to the effectiveness of simulation training, but such attitudes remain poorly explored in neurosurgery with no psychometrically proven measure in the literature. The aim of the present study was to evaluate prospectively a newly developed tool for this purpose: the Neurosurgical Evaluation of Attitudes towards simulation Training (NEAT). The NEAT tool was prospectively developed in 2 stages and psychometrically evaluated (validity and reliability) in 2 administrations with the same participants. The tool comprises a questionnaire with 9 Likert scale items and 2 free-text sections assessing attitudes toward simulation in neurosurgery. The evaluation was completed with 31 neurosurgery residents in London, United Kingdom, who were generally favorable toward neurosurgical simulation. The internal consistency of the questionnaire was high, as demonstrated by the overall Cronbach α values (α=0.899 and α=0.955). All but 2 questionnaire items had "substantial" or "almost perfect" test-retest reliability following repeated survey administrations (median Pearson r correlation=0.688; range, 0.248-0.841). NEAT items were well correlated with each other on both occasions, showing good validity of content within the NEAT tool. There was no significant relationship between either gender or length of neurosurgical experience and item ratings. NEAT is the first psychometrically evaluated tool for evaluating attitudes toward simulation in neurosurgery. Further implementation of NEAT is required in wider neurosurgical populations to establish whether specific population groups differ. Use of NEAT in studies of neurosurgical simulation could offer an additional outcome measure to performance metrics, permitting evaluation of the impact of neurosurgical simulation on attitudes toward simulation both between participants and within the same participants over time. Copyright © 2014 Elsevier Inc. All rights reserved.

Optimization of Simulation-Based Training Systems: Model Description, Implementation, and Evaluation

DTIC Science & Technology

1990-06-01

Taskcs01 for Instructional _______Cue ______ 0__ Fq’o~eturesResponse 1A I Analyze Tasks %Requirements 018 TaskfrFieiy0-m Learning fo ielt asl... academic instruction on aircraft systems, emergency procedures, and tactics. Although some Army aviators enter the AH-I AQC immediately after completing...from low to high fidelity, and (d) tasks could not be trained to standard using academic training only. The tasks that were chosen are enumerated in

Student perception of two different simulation techniques in oral and maxillofacial surgery undergraduate training.

PubMed

Lund, Bodil; Fors, Uno; Sejersen, Ronny; Sallnäs, Eva-Lotta; Rosén, Annika

2011-10-12

Yearly surveys among the undergraduate students in oral and maxillofacial surgery at Karolinska Institutet have conveyed a wish for increased clinical training, and in particular, in surgical removal of mandibular third molars. Due to lack of resources, this kind of clinical supervision has so far not been possible to implement. One possible solution to this problem might be to introduce simulation into the curriculum. The purpose of this study was to investigate undergraduate students' perception of two different simulation methods for practicing clinical reasoning skills and technical skills in oral and maxillofacial surgery. Forty-seven students participating in the oral and maxillofacial surgery course at Karolinska Institutet during their final year were included. Three different oral surgery patient cases were created in a Virtual Patient (VP) Simulation system (Web-SP) and used for training clinical reasoning. A mandibular third molar surgery simulator with tactile feedback, providing hands on training in the bone removal and tooth sectioning in third molar surgery, was also tested. A seminar was performed using the combination of these two simulators where students' perception of the two different simulation methods was assessed by means of a questionnaire. The response rate was 91.5% (43/47). The students were positive to the VP cases, although they rated their possible improvement of clinical reasoning skills as moderate. The students' perception of improved technical skills after training in the mandibular third molar surgery simulator was rated high. The majority of the students agreed that both simulation techniques should be included in the curriculum and strongly agreed that it was a good idea to use the two simulators in concert. The importance of feedback from the senior experts during simulator training was emphasised. The two tested simulation methods were well accepted and most students agreed that the future curriculum would benefit from permanent inclusion of these exercises, especially when used in combination. The results also stress the importance of teaching technical skills and clinical reasoning in concert.

Improved Safety and Cost Savings from Reductions in Cast-Saw Burns After Simulation-Based Education for Orthopaedic Surgery Residents.

PubMed

Bae, Donald S; Lynch, Hayley; Jamieson, Katherine; Yu-Moe, C Winnie; Roussin, Christopher

2017-09-06

The purpose of this investigation was to characterize the clinical efficacy and cost-effectiveness of simulation training aimed at reducing cast-saw injuries. Third-year orthopaedic residents underwent simulation-based instruction on distal radial fracture reduction, casting, and cast removal using an oscillating saw. The analysis compared incidences of cast-saw injuries and associated costs before and after the implementation of the simulation curriculum. Actual and potential costs associated with cast-saw injuries included wound care, extra clinical visits, and potential total payment (indemnity and expense payments). Curriculum costs were calculated through time-derived, activity-based accounting methods. The researchers compared the costs of cast-saw injuries and the simulation curriculum to determine overall savings and return on investment. In the 2.5 years prior to simulation, cast-saw injuries occurred in approximately 4.3 per 100 casts cut by orthopaedic residents. For the 2.5-year period post-simulation, the injury rate decreased significantly to approximately 0.7 per 100 casts cut (p = 0.002). The total cost to implement the casting simulation was $2,465.31 per 6-month resident rotation. On the basis of historical data related to cast-saw burns (n = 6), total payments ranged from $2,995 to $25,000 per claim. The anticipated savings from averted cast-saw injuries and associated medicolegal payments in the 2.5 years post-simulation was $27,131, representing an 11-to-1 return on investment. Simulation-based training for orthopaedic surgical residents was effective in reducing cast-saw injuries and had a high theoretical return on investment. These results support further investment in simulation-based training as cost-effective means of improving patient safety and clinical outcomes. Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

Rotor systems research aircraft simulation mathematical model

NASA Technical Reports Server (NTRS)

Houck, J. A.; Moore, F. L.; Howlett, J. J.; Pollock, K. S.; Browne, M. M.

1977-01-01

An analytical model developed for evaluating and verifying advanced rotor concepts is discussed. The model was used during in both open loop and real time man-in-the-loop simulation during the rotor systems research aircraft design. Future applications include: pilot training, preflight of test programs, and the evaluation of promising concepts before their implementation on the flight vehicle.

A Guide to Computer Simulations of Three Adaptive Instructional Models for the Advanced Instructional System Phases II and III. Final Report.

ERIC Educational Resources Information Center

Hansen, Duncan N.; And Others

Computer simulations of three individualized adaptive instructional models (AIM) were undertaken to determine if these models function as prescribed in Air Force technical training programs. In addition, the project sought to develop a user's guide for effective understanding of adaptive models during field implementation. Successful simulations…

Laparoscopic Skills Are Improved With LapMentor™ Training

PubMed Central

Andreatta, Pamela B.; Woodrum, Derek T.; Birkmeyer, John D.; Yellamanchilli, Rajani K.; Doherty, Gerard M.; Gauger, Paul G.; Minter, Rebecca M.

2006-01-01

Objective: To determine if prior training on the LapMentor™ laparoscopic simulator leads to improved performance of basic laparoscopic skills in the animate operating room environment. Summary Background Data: Numerous influences have led to the development of computer-aided laparoscopic simulators: a need for greater efficiency in training, the unique and complex nature of laparoscopic surgery, and the increasing demand that surgeons demonstrate competence before proceeding to the operating room. The LapMentor™ simulator is expensive, however, and its use must be validated and justified prior to implementation into surgical training programs. Methods: Nineteen surgical interns were randomized to training on the LapMentor™ laparoscopic simulator (n = 10) or to a control group (no simulator training, n = 9). Subjects randomized to the LapMentor™ trained to expert criterion levels 2 consecutive times on 6 designated basic skills modules. All subjects then completed a series of laparoscopic exercises in a live porcine model, and performance was assessed independently by 2 blinded reviewers. Time, accuracy rates, and global assessments of performance were recorded with an interrater reliability between reviewers of 0.99. Results: LapMentor™ trained interns completed the 30° camera navigation exercise in significantly less time than control interns (166 ± 52 vs. 220 ± 39 seconds, P < 0.05); they also achieved higher accuracy rates in identifying the required objects with the laparoscope (96% ± 8% vs. 82% ± 15%, P < 0.05). Similarly, on the two-handed object transfer exercise, task completion time for LapMentor™ trained versus control interns was 130 ± 23 versus 184 ± 43 seconds (P < 0.01) with an accuracy rate of 98% ± 5% versus 80% ± 13% (P < 0.001). Additionally, LapMentor™ trained interns outperformed control subjects with regard to camera navigation skills, efficiency of motion, optimal instrument handling, perceptual ability, and performance of safe electrocautery. Conclusions: This study demonstrates that prior training on the LapMentor™ laparoscopic simulator leads to improved resident performance of basic skills in the animate operating room environment. This work marks the first prospective, randomized evaluation of the LapMentor™ simulator, and provides evidence that LapMentor™ training may lead to improved operating room performance. PMID:16772789

CyberMedVPS: visual programming for development of simulators.

PubMed

Morais, Aline M; Machado, Liliane S

2011-01-01

Computer applications based on Virtual Reality (VR) has been outstanding in training and teaching in the medical filed due to their ability to simulate realistic in which users can practice skills and decision making in different situations. But was realized in these frameworks a hard interaction of non-programmers users. Based on this problematic will be shown the CyberMedVPS, a graphical module which implement Visual Programming concepts to solve an interaction trouble. Frameworks to develop such simulators are available but their use demands knowledge of programming. Based on this problematic will be shown the CyberMedVPS, a graphical module for the CyberMed framework, which implements Visual Programming concepts to allow the development of simulators by non-programmers professionals of the medical field.

Simulator sickness in a helicopter flight training school.

PubMed

Webb, Catherine M; Bass, Julie M; Johnson, David M; Kelley, Amanda M; Martin, Christopher R; Wildzunas, Robert M

2009-06-01

Simulator sickness (SS) is a common problem during flight training and can affect both instructor pilots (IP) and student pilots (SP). This study was conducted in response to complaints about a high incidence of SS associated with use of new simulators for rotary-wing aircraft. The problem was evaluated using the Simulator Sickness Questionnaire (SSQ) to collect data on 73 IP and 129 SP who used the new simulators. Based on analysis of these data, operator comments, and a search of the literature, we recommended limiting simulator flights to 2 h, removing unusual or unnatural maneuvers, turning off the sidescreens to reduce the field-of-view, avoiding use of improperly calibrated simulators until repaired, and stressing proper rest and health discipline among the pilots. The success of these measures was evaluated 1 yr later by collecting SSQ data on 25 IP and 50 SP. There was a main effect of time, in that after the recommendations were implemented, there was a significant reduction in nausea, oculomotor, and total SSQ scores from the pre-study to the post-study. There was also a main effect of experience, as IP reported significantly greater SS than SP for the same scores. Implementation of the recommendations reduced SS in the new simulators at the cost of limiting session duration and shutting down some simulator features. Although the optimal solution to the SS problem lies in addressing SS during a simulator's design stage, these recommendations can be used as interim solutions to reduce SS.

Design and Implementation of a postgraduate curriculum to support Ethiopia's first emergency medicine residency training program: the Toronto Addis Ababa Academic Collaboration in Emergency Medicine (TAAAC-EM).

PubMed

Meshkat, Nazanin; Teklu, Sisay; Hunchak, Cheryl

2018-04-06

To design and implement an emergency medicine (EM) postgraduate training curriculum to support the establishment of the first EM residency program at Addis Ababa University (AAU). In response to the Ethiopian Federal Ministry of Health mandate to develop EM services in Ethiopia, University of Toronto EM faculty were invited to develop and deliver EM content and expertise for the first EM postgraduate residency training program at AAU. The Toronto Addis Ababa Academic Collaboration-EM (TAAAC-EM) used five steps of a six-step approach to guide curriculum development and implementation: 1. Problem identification and general needs assessment, 2. Targeted needs assessment using indirect methods (interviews and site visits of the learners and learning environment), 3. Defining goals and objectives, 4. Choosing educational strategies and curriculum map development and 5. The needs assessment identified a learning environment with appropriate, though limited, resources for the implementation of an EM residency program. A lack of educational activities geared towards EM practice was identified, specifically of active learning techniques (ALTs) such as bedside teaching, simulation and procedural teaching. A curriculum map was devised to supplement the AAU EM residency program curriculum. The TAAAC-EM curriculum was divided into three distinct streams: clinical, clinical epidemiology and EM administration. The clinical sessions were divided into didactic and ALTs including practical/procedural and simulation sessions, and bedside teaching was given a strong emphasis. Implementation is currently in its seventh year, with continuous monitoring and revisions of the curriculum to meet evolving needs. We have outlined the design and implementation of the TAAAC-EM curriculum; an evaluation of this curriculum is currently underway. As EM spreads as a specialty throughout Africa and other resource-limited regions, this model can serve as a working guide for similar bi-institutional educational partnerships seeking to develop novel EM postgraduate training programs.

A data-driven dynamics simulation framework for railway vehicles

NASA Astrophysics Data System (ADS)

Nie, Yinyu; Tang, Zhao; Liu, Fengjia; Chang, Jian; Zhang, Jianjun

2018-03-01

The finite element (FE) method is essential for simulating vehicle dynamics with fine details, especially for train crash simulations. However, factors such as the complexity of meshes and the distortion involved in a large deformation would undermine its calculation efficiency. An alternative method, the multi-body (MB) dynamics simulation provides satisfying time efficiency but limited accuracy when highly nonlinear dynamic process is involved. To maintain the advantages of both methods, this paper proposes a data-driven simulation framework for dynamics simulation of railway vehicles. This framework uses machine learning techniques to extract nonlinear features from training data generated by FE simulations so that specific mesh structures can be formulated by a surrogate element (or surrogate elements) to replace the original mechanical elements, and the dynamics simulation can be implemented by co-simulation with the surrogate element(s) embedded into a MB model. This framework consists of a series of techniques including data collection, feature extraction, training data sampling, surrogate element building, and model evaluation and selection. To verify the feasibility of this framework, we present two case studies, a vertical dynamics simulation and a longitudinal dynamics simulation, based on co-simulation with MATLAB/Simulink and Simpack, and a further comparison with a popular data-driven model (the Kriging model) is provided. The simulation result shows that using the legendre polynomial regression model in building surrogate elements can largely cut down the simulation time without sacrifice in accuracy.

Clinical Core Competency Training for NASA Flight Surgeons

NASA Technical Reports Server (NTRS)

Polk, J. D.; Schmid, Josef; Hurst, Victor, IV; Doerr, Harold K.; Doerr, Harold K.

2007-01-01

Introduction: The cohort of NASA flight surgeons (FS) is a very accomplished group with varied clinical backgrounds; however, the NASA Flight Surgeon Office has identified that the extremely demanding schedule of this cohort prevents many of these physicians from practicing clinical medicine on a regular basis. In an effort to improve clinical competency, the NASA FS Office has dedicated one day a week for the FS to receive clinical training. Each week, an FS is assigned to one of five clinical settings, one being medical patient simulation. The Medical Operations Support Team (MOST) was tasked to develop curricula using medical patient simulation that would meet the clinical and operational needs of the NASA FS Office. Methods: The MOST met with the Lead FS and Training Lead FS to identify those core competencies most important to the FS cohort. The MOST presented core competency standards from the American Colleges of Emergency Medicine and Internal Medicine as a basis for developing the training. Results: The MOST identified those clinical areas that could be best demonstrated and taught using medical patient simulation, in particular, using high fidelity human patient simulators. Curricula are currently being developed and additional classes will be implemented to instruct the FS cohort. The curricula will incorporate several environments for instruction, including lab-based and simulated microgravity-based environments. Discussion: The response from the NASA FS cohort to the initial introductory class has been positive. As a result of this effort, the MOST has identified three types of training to meet the clinical needs of the FS Office; clinical core competency training, individual clinical refresher training, and just-in-time training (specific for post-ISS Expedition landings). The MOST is continuing to work with the FS Office to augment the clinical training for the FS cohort, including the integration of Web-based learning.

Simulation as a Tool to Facilitate Practice Changes in Teams Taking Care of Patients Under Investigation for Ebola Virus Disease in Spain.

PubMed

Rojo, Elena; Oruña, Clara; Sierra, Dolores; García, Gema; Del Moral, Ignacio; Maestre, Jose M

2016-04-01

We analyzed the impact of simulation-based training on clinical practice and work processes on teams caring for patients with possible Ebola virus disease (EVD) in Cantabria, Spain. The Government of Spain set up a special committee for the management of EVD, and the Spanish Ministry of Health and foreign health services created an action protocol. Each region is responsible for selecting a reference hospital and an in-house care team to care for patients under investigation. Laboratory-confirmed cases of EVD have to be transferred to the Carlos III Health Institute in Madrid. Predeployment training and follow-up support are required to help personnel work safely and effectively. Simulation-based scenarios were designed to give staff the opportunity to practice before encountering a real-life situation. Lessons learned by each team during debriefings were listed, and a survey administered 3 months later assessed the implementation of practice and system changes. Implemented changes were related to clinical practice (eg, teamwork principles application), protocol implementation (eg, addition of new processes and rewriting of confusing parts), and system and workflow (eg, change of shift schedule and rearrangement of room equipment). Simulation can be used to detect needed changes in protocol or guidelines or can be adapted to meet the needs of a specific team.

Advanced helmet mounted display (AHMD)

NASA Astrophysics Data System (ADS)

Sisodia, Ashok; Bayer, Michael; Townley-Smith, Paul; Nash, Brian; Little, Jay; Cassarly, William; Gupta, Anurag

2007-04-01

Due to significantly increased U.S. military involvement in deterrent, observer, security, peacekeeping and combat roles around the world, the military expects significant future growth in the demand for deployable virtual reality trainers with networked simulation capability of the battle space visualization process. The use of HMD technology in simulated virtual environments has been initiated by the demand for more effective training tools. The AHMD overlays computer-generated data (symbology, synthetic imagery, enhanced imagery) augmented with actual and simulated visible environment. The AHMD can be used to support deployable reconfigurable training solutions as well as traditional simulation requirements, UAV augmented reality, air traffic control and Command, Control, Communications, Computers, Intelligence, Surveillance, and Reconnaissance (C4ISR) applications. This paper will describe the design improvements implemented for production of the AHMD System.

Service provider perceptions of transitioning from audio to video capability in a telehealth system: a qualitative evaluation.

PubMed

Clay-Williams, Robyn; Baysari, Melissa; Taylor, Natalie; Zalitis, Dianne; Georgiou, Andrew; Robinson, Maureen; Braithwaite, Jeffrey; Westbrook, Johanna

2017-08-14

Telephone consultation and triage services are increasingly being used to deliver health advice. Availability of high speed internet services in remote areas allows healthcare providers to move from telephone to video telehealth services. Current approaches for assessing video services have limitations. This study aimed to identify the challenges for service providers associated with transitioning from audio to video technology. Using a mixed-method, qualitative approach, we observed training of service providers who were required to switch from telephone to video, and conducted pre- and post-training interviews with 15 service providers and their trainers on the challenges associated with transitioning to video. Two full days of simulation training were observed. Data were transcribed and analysed using an inductive approach; a modified constant comparative method was employed to identify common themes. We found three broad categories of issues likely to affect implementation of the video service: social, professional, and technical. Within these categories, eight sub-themes were identified; they were: enhanced delivery of the health service, improved health advice for people living in remote areas, safety concerns, professional risks, poor uptake of video service, system design issues, use of simulation for system testing, and use of simulation for system training. This study identified a number of unexpected potential barriers to successful transition from telephone to the video system. Most prominent were technical and training issues, and personal safety concerns about transitioning from telephone to video media. Addressing identified issues prior to implementation of a new video telehealth system is likely to improve effectiveness and uptake.

SmartSIM - a virtual reality simulator for laparoscopy training using a generic physics engine.

PubMed

Khan, Zohaib Amjad; Kamal, Nabeel; Hameed, Asad; Mahmood, Amama; Zainab, Rida; Sadia, Bushra; Mansoor, Shamyl Bin; Hasan, Osman

2017-09-01

Virtual reality (VR) training simulators have started playing a vital role in enhancing surgical skills, such as hand-eye coordination in laparoscopy, and practicing surgical scenarios that cannot be easily created using physical models. We describe a new VR simulator for basic training in laparoscopy, i.e. SmartSIM, which has been developed using a generic open-source physics engine called the simulation open framework architecture (SOFA). This paper describes the systems perspective of SmartSIM including design details of both hardware and software components, while highlighting the critical design decisions. Some of the distinguishing features of SmartSIM include: (i) an easy-to-fabricate custom-built hardware interface; (ii) use of a generic physics engine to facilitate wider accessibility of our work and flexibility in terms of using various graphical modelling algorithms and their implementations; and (iii) an intelligent and smart evaluation mechanism that facilitates unsupervised and independent learning. Copyright © 2016 John Wiley & Sons, Ltd.

Elementary School Teacher Training Based on Needs and Interests of Teachers and The Effectiveness of The Improvement of Students Competence

NASA Astrophysics Data System (ADS)

Suyitno, A.; Sugiharti, E.; Pujiastuti, E.

2017-04-01

Teachers need always to improve their competence because of the growth of science very rapidly as well as elementary school teachers. However, the provision of training will not produce an increase in the competence effectively if it is implemented without considering the needs and interests of teachers. The novelty factor which is highlighted through this research results, want to answer a problem, namely: how to conduct an effective training based on the needs and interests of teachers so that the effects of training can improve the competence of teachers? After going through research for two years with a qualitative approach which was preceded by a visit to the school and a series of interviews, treatment of training model, FGD, and triangulation then have been produced a way to implement of training based on the needs and interests of teachers. The training model includes face to face training which structured and scheduled according to the needs of elementary school teachers, followed by workshops, simulations, then the coach holds guidance in the classroom, and ends with reflections.

Simulation-based training for prostate surgery.

PubMed

Khan, Raheej; Aydin, Abdullatif; Khan, Muhammad Shamim; Dasgupta, Prokar; Ahmed, Kamran

2015-10-01

To identify and review the currently available simulators for prostate surgery and to explore the evidence supporting their validity for training purposes. A review of the literature between 1999 and 2014 was performed. The search terms included a combination of urology, prostate surgery, robotic prostatectomy, laparoscopic prostatectomy, transurethral resection of the prostate (TURP), simulation, virtual reality, animal model, human cadavers, training, assessment, technical skills, validation and learning curves. Furthermore, relevant abstracts from the American Urological Association, European Association of Urology, British Association of Urological Surgeons and World Congress of Endourology meetings, between 1999 and 2013, were included. Only studies related to prostate surgery simulators were included; studies regarding other urological simulators were excluded. A total of 22 studies that carried out a validation study were identified. Five validated models and/or simulators were identified for TURP, one for photoselective vaporisation of the prostate, two for holmium enucleation of the prostate, three for laparoscopic radical prostatectomy (LRP) and four for robot-assisted surgery. Of the TURP simulators, all five have demonstrated content validity, three face validity and four construct validity. The GreenLight laser simulator has demonstrated face, content and construct validities. The Kansai HoLEP Simulator has demonstrated face and content validity whilst the UroSim HoLEP Simulator has demonstrated face, content and construct validity. All three animal models for LRP have been shown to have construct validity whilst the chicken skin model was also content valid. Only two robotic simulators were identified with relevance to robot-assisted laparoscopic prostatectomy, both of which demonstrated construct validity. A wide range of different simulators are available for prostate surgery, including synthetic bench models, virtual-reality platforms, animal models, human cadavers, distributed simulation and advanced training programmes and modules. The currently validated simulators can be used by healthcare organisations to provide supplementary training sessions for trainee surgeons. Further research should be conducted to validate simulated environments, to determine which simulators have greater efficacy than others and to assess the cost-effectiveness of the simulators and the transferability of skills learnt. With surgeons investigating new possibilities for easily reproducible and valid methods of training, simulation offers great scope for implementation alongside traditional methods of training. © 2014 The Authors BJU International © 2014 BJU International Published by John Wiley & Sons Ltd.

The Simulation of a Jumbo Jet Transport Aircraft. Volume 2: Modeling Data

NASA Technical Reports Server (NTRS)

Hanke, C. R.; Nordwall, D. R.

1970-01-01

The manned simulation of a large transport aircraft is described. Aircraft and systems data necessary to implement the mathematical model described in Volume I and a discussion of how these data are used in model are presented. The results of the real-time computations in the NASA Ames Research Center Flight Simulator for Advanced Aircraft are shown and compared to flight test data and to the results obtained in a training simulator known to be satisfactory.

Gynecologic simulation training increases medical student confidence and interest in women's health.

PubMed

Nitschmann, Caroline; Bartz, Deborah; Johnson, Natasha R

2014-01-01

Exposure to commonly performed gynecologic procedures via simulation has potential to improve medical student knowledge and foster confidence with procedures. To implement and evaluate a gynecologic simulation curriculum for 3rd-year medical students during their obstetrics and gynecology core clerkship. A gynecologic simulation curriculum was implemented for medical students during their obstetrics and gynecology clerkship. Participants completed pre-and postsurveys to assess learner confidence; effect on interest in a surgical field, women's health, and obstetrics and gynecology as a career; and whether the session met their learning needs. Fifty-nine students participated. Improved confidence in performing the procedures was noted when comparing mean survey scores before and after the simulation for IUD insertion and removal (1.9 pre, 4.3 post, p < .0001), for dilatation and curettage (1.7 pre, 3.8 post, p < .0001), and basic laparoscopy skills (2.1 pre, 4.3 post, p < .0001). An increase in pursuing a surgical field (3.3 pre, 3.6 post, p < .003) and interest in women's health (3.7 pre, 4.9 post, p < .004) was noted among students after the simulation session. The curriculum strongly met the students learning needs with a mean score of 4.54 on the 5-point scale. Gynecologic simulation training for medical students can increase confidence in procedures, interest in pursuing a surgical field and women's health, and was highly effective in meeting student learning needs.

Embryo transfer simulation improves pregnancy rates and decreases time to proficiency in Reproductive Endocrinology and Infertility fellow embryo transfers.

PubMed

Heitmann, Ryan J; Hill, Micah J; Csokmay, John M; Pilgrim, Justin; DeCherney, Alan H; Deering, Shad

2017-05-01

To design and evaluate an ET simulator to train Reproductive Endocrinology and Infertility (REI) fellows' techniques of ET. Simulation model development and retrospective cohort analysis. Not applicable. Patients undergoing IVF. Simulation model evaluation and implementation of ET simulation training. Pregnancy rates. The REI fellow and faculty evaluation responses (n = 19/21 [90%]) of the model demonstrated realistic characteristics, with evaluators concluding the model was suitable for training in almost all evaluated areas. A total of 12 REI fellows who performed ET were analyzed: 6 before ET trainer and 6 after ET trainer. Pregnancy rates were 31% in the initial 10 ETs per fellow before simulator vs. 46% after simulator. One of six pre-ET trainer fellows (17%) had pregnancy rates ≥40% in their first 10 ETs; whereas four of six post-ET trainer fellows had pregnancy rates ≥40% in their first 10 ETs. The average number of ETs to obtain >40% pregnancy efficiency was 27 ETs before trainer vs. 15 ETs after trainer. Pregnancy rates were similar in the two groups after 20 ETs, and collective terminal pregnancy rates were >50% after 40 ETs. Embryo transfer simulation improved REI fellow pregnancy rates in their first 10 transfers and led to a more rapid ET proficiency. These data suggest potential value in adopting ET simulation, even in programs with a robust history of live ET in fellowship training. Published by Elsevier Inc.

An Event-Based Approach to Design a Teamwork Training Scenario and Assessment Tool in Surgery.

PubMed

Nguyen, Ngan; Watson, William D; Dominguez, Edward

2016-01-01

Simulation is a technique recommended for teaching and measuring teamwork, but few published methodologies are available on how best to design simulation for teamwork training in surgery and health care in general. The purpose of this article is to describe a general methodology, called event-based approach to training (EBAT), to guide the design of simulation for teamwork training and discuss its application to surgery. The EBAT methodology draws on the science of training by systematically introducing training exercise events that are linked to training requirements (i.e., competencies being trained and learning objectives) and performance assessment. The EBAT process involves: Of the 4 teamwork competencies endorsed by the Agency for Healthcare Research Quality and Department of Defense, "communication" was chosen to be the focus of our training efforts. A total of 5 learning objectives were defined based on 5 validated teamwork and communication techniques. Diagnostic laparoscopy was chosen as the clinical context to frame the training scenario, and 29 KSAs were defined based on review of published literature on patient safety and input from subject matter experts. Critical events included those that correspond to a specific phase in the normal flow of a surgical procedure as well as clinical events that may occur when performing the operation. Similar to the targeted KSAs, targeted responses to the critical events were developed based on existing literature and gathering input from content experts. Finally, a 29-item EBAT-derived checklist was created to assess communication performance. Like any instructional tool, simulation is only effective if it is designed and implemented appropriately. It is recognized that the effectiveness of simulation depends on whether (1) it is built upon a theoretical framework, (2) it uses preplanned structured exercises or events to allow learners the opportunity to exhibit the targeted KSAs, (3) it assesses performance, and (4) it provides formative and constructive feedback to bridge the gap between the learners' KSAs and the targeted KSAs. The EBAT methodology guides the design of simulation that incorporates these 4 features and, thus, enhances training effectiveness with simulation. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

The Crucible simulation: Behavioral simulation improves clinical leadership skills and understanding of complex health policy change.

PubMed

Cohen, Daniel; Vlaev, Ivo; McMahon, Laurie; Harvey, Sarah; Mitchell, Andy; Borovoi, Leah; Darzi, Ara

2017-05-11

The Health and Social Care Act 2012 represents the most complex National Health Service reforms in history. High-quality clinical leadership is important for successful implementation of health service reform. However, little is known about the effectiveness of current leadership training. This study describes the use of a behavioral simulation to improve the knowledge and leadership of a cohort of medical doctors expected to take leadership roles in the National Health Service. A day-long behavioral simulation (The Crucible) was developed and run based on a fictitious but realistic health economy. Participants completed pre- and postsimulation questionnaires generating qualitative and quantitative data. Leadership skills, knowledge, and behavior change processes described by the "theory of planned behavior" were self-assessed pre- and postsimulation. Sixty-nine medical doctors attended. Participants deemed the simulation immersive and relevant. Significant improvements were shown in perceived knowledge, capability, attitudes, subjective norms, intentions, and leadership competency following the program. Nearly one third of participants reported that they had implemented knowledge and skills from the simulation into practice within 4 weeks. This study systematically demonstrates the effectiveness of behavioral simulation for clinical management training and understanding of health policy reform. Potential future uses and strategies for analysis are discussed. High-quality care requires understanding of health systems and strong leadership. Policymakers should consider the use of behavioral simulation to improve understanding of health service reform and development of leadership skills in clinicians, who readily adopt skills from simulation into everyday practice.

The impact of university provided nurse electronic medical record training on health care organizations: an exploratory simulation approach.

PubMed

Abrahamson, Kathleen; Anderson, James G; Borycki, Elizabeth M; Kushniruk, Andre W; Malovec, Shannon; Espejo, Angela; Anderson, Marilyn

2015-01-01

Training providers appropriately, particularly early in their caregiving careers, is an important aspect of electronic medical record (EMR) implementation. Considerable time and resources are needed to bring the newly hired providers 'up to speed' with the actual use practices of the organization. Similarly, universities lose valuable clinical training hours when students are required to spend those hours learning organization-specific EMR systems in order to participate in care during clinical rotations. Although there are multiple real-world barriers to university/health care organization training partnerships, the investment these entities share in training care providers, specifically nurses, to use and understand EMR technology encourages a question: What would be the cumulative effect of integrating a mutually agreed upon EMR system training program in to nursing classroom training on downstream hospital costs in terms of hours of direct caregiving lost, and benefits in terms of number of overall EMR trained nurses hired? In order to inform the development of a large scale study, we employed a dynamic systems modeling approach to simulate the theoretical relationships between key model variables and determine the possible effect of integrating EMR training into nursing classrooms on hospital outcomes. The analysis indicated that integrating EMR training into the nursing classroom curriculum results in more available time for nurse bedside care. Also, the simulation suggests that efficiency of clinical training can be potentially improved by centralizing EMR training within the nursing curriculum.

Implementation Plan for Worldwide Airborne Command Post (WWABNCP) Operator Computer-Based Training (PLATO): Decision Paper.

DTIC Science & Technology

1985-10-03

Electrospace Systems, Inc. (ESI). ESI con- ducted a market search for training systems that would enhance unit level training, minimize cost-prohibitive...can be reprogrammed to simulate the UGC -129 keyboard. This keyboard is the standard keyboard used for data transmission on board the EC-135 and E-4B...with the appropriate technical order, and the functions and operation of the AN/ UGC -129 (ASR) terminals used with the AN/ASC-21 AFSATCOM system. In

Improving Navy Recruit Confidence Expectancies and Knowledge in a Simulated Chemical Warfare Environment

DTIC Science & Technology

1988-06-27

Hamman, HTSC D. M. Trefsger, ENCS J. E. Pernice, and their supporting personnel at the Damage Control and Firefighting School. 9 %S NTSC TR88-010 EXECUTIVE...standard training group served as the control condition; here, no changes were made to the usual training procedure. The no-film group was included as...an additional control in this research because, at the time of implementation, the CBR-D training program was being conducted without showing film MN

A Simulation-Based Program to Train Medical Residents to Lead and Perform Advanced Cardiovascular Life Support

PubMed Central

Stefan, Mihaela S.; Belforti, Raquel K.; Langlois, Gerard; Rothberg, Michael B.

2014-01-01

Background Medical residents are often responsible for leading and performing cardiopulmonary resuscitation; however, their levels of expertise and comfort as leaders of advanced cardiovascular life support (ACLS) teams vary widely. While the current American Heart Association ACLS course provides education in recommended resuscitative protocols, training in leadership skills is insufficient. In this article, we describe the design and implementation in our institution of a formative curriculum aimed at improving residents’ readiness for being leaders of ACLS teams using human patient simulation. Human patient simulation refers to a variety of technologies using mannequins with realistic features, which allows learners to practice through scenarios without putting patients at risk. We discuss the limitations of the program and the challenges encountered in implementation. We also provide a description of the initiation and organization of the program. Case scenarios and assessment tools are provided. Description of the Institutional Training Program Our simulation-based training curriculum consists of 8 simulated patient scenarios during four 1-hour sessions. Postgraduate year–2 and 3 internal medicine residents participate in this program in teams of 4. Assessment tools are utilized only for formative evaluation. Debriefing is used as a teaching strategy for the individual resident leader of the ACLS team to facilitate learning and improve performance. To evaluate the impact of the curriculum, we administered a survey before and after the intervention. The survey consisted of 10 questions answered on a 5-point Likert scale, which addressed residents’ confidence in leading ACLS teams, management of the equipment, and management of cardiac rhythms. Respondents’ mean presimulation (ie, baseline) and postsimulation (outcome) scores were compared using a 2-sample t test. Residents’ overall confidence score improved from 2.8 to 3.9 (P < 0.001; mean improvement, 1.1; 95% confidence interval, 0.7–1.6). The average score for performing and leading ACLS teams improved from 2.8 to 4 (P < 0.001; mean difference, 1.2; 95% confidence interval, 0.7–1.7). There was a uniform increase in the residents’ self-confidence in their role as effective leaders of ACLS teams, and residents valued this simulation-based training program. PMID:22056824

Does the effect of one-day simulation team training in obstetric emergencies decline within one year? A post-hoc analysis of a multicentre cluster randomised controlled trial.

PubMed

van de Ven, J; Fransen, A F; Schuit, E; van Runnard Heimel, P J; Mol, B W; Oei, S G

2017-09-01

Does the effect of one-day simulation team training in obstetric emergencies decline within one year? A post-hoc analysis of a multicentre cluster randomised controlled trial. J van de Ven, AF Fransen, E Schuit, PJ van Runnard Heimel, BW Mol, SG Oei OBJECTIVE: To investigate whether the effect of a one-day simulation-based obstetric team training on patient outcome changes over time. Post-hoc analysis of a multicentre, open, randomised controlled trial that evaluated team training in obstetrics (TOSTI study).We studied women with a singleton pregnancy beyond 24 weeks of gestation in 24 obstetric units. Included obstetric units were randomised to either a one-day, multi-professional simulation-based team training focusing on crew resource management in a medical simulation centre (12 units) or to no team training (12 units). We assessed whether outcomes differed between both groups in each of the first four quarters following the team training and compared the effect of team training over quarters. Primary outcome was a composite outcome of low Apgar score, severe postpartum haemorrhage, trauma due to shoulder dystocia, eclampsia and hypoxic-ischemic encephalopathy. During a one year period after the team training the rate of obstetric complications, both on the composite level and the individual component level, did not differ between any of the quarters. For trauma due to shoulder dystocia team training led to a significant decrease in the first quarter (0.06% versus 0.26%, OR 0.19, 95% CI 0.03 to 0.98) but in the subsequent quarters no significant reductions were observed. Similar results were found for invasive treatment for severe postpartum haemorrhage where a significant increase was only seen in the first quarter (0.4% versus 0.03%, OR 19, 95% CI 2.5-147), and not thereafter. The beneficial effect of a one-day, simulation-based, multiprofessional, obstetric team training seems to decline after three months. If team training is further evaluated or implemented, repetitive training sessions every three months seem therefore recommended. Copyright © 2017 Elsevier B.V. All rights reserved.

Case Study of the U.S. Army’s Should-Cost Management Implementation

DTIC Science & Technology

2013-12-03

and Pelvic Protection Systems (PPS). After graduating from the Naval Postgraduate School, Major Choi will be assigned to the U.S. Army...Systems PMO Product/Project/Program Management Office PMT Program Management Training POA&M Plan of Action and Milestones POE Program Office...Intelligence, Electronic Warfare and Sensors  PEO Simulation, Training , and Instrumentation  JPEO Chemical and Biological Defense The researcher

Teacher Training and the Curriculum: An Investigation. Papers Relating to the Dunford House Seminar (England, United Kingdom, July 19-29, 1982).

ERIC Educational Resources Information Center

Coffey, B., Ed.

Proceedings of a seminar on the design and implementation of training education programs for English-as-a-Second-Language teachers are presented in the form of papers, presentations, and summary narrative. They include the following: the keynote address (Peter Strevens); "Case Studies Evaluation Exercise" (M. P. Breen); "The Simulation Exercise"…

Space station Simulation Computer System (SCS) study for NASA/MSFC. Volume 2: Concept document

NASA Technical Reports Server (NTRS)

1989-01-01

The Simulation Computer System (SCS) concept document describes and establishes requirements for the functional performance of the SCS system, including interface, logistic, and qualification requirements. The SCS is the computational communications and display segment of the Marshall Space Flight Center (MSFC) Payload Training Complex (PTC). The PTC is the MSFC facility that will train onboard and ground operations personnel to operate the payloads and experiments on board the international Space Station Freedom. The requirements to be satisfied by the system implementation are identified here. The SCS concept document defines the requirements to be satisfied through the implementation of the system capability. The information provides the operational basis for defining the requirements to be allocated to the system components and enables the system organization to assess whether or not the completed system complies with the requirements of the system.

Design and implementation of a virtual world training simulation of ICU first hour handover processes.

PubMed

Brown, Ross; Rasmussen, Rune; Baldwin, Ian; Wyeth, Peta

2012-08-01

Nursing training for an Intensive Care Unit (ICU) is a resource intensive process. High demands are made on staff, students and physical resources. Interactive, 3D computer simulations, known as virtual worlds, are increasingly being used to supplement training regimes in the health sciences; especially in areas such as complex hospital ward processes. Such worlds have been found to be very useful in maximising the utilisation of training resources. Our aim is to design and develop a novel virtual world application for teaching and training Intensive Care nurses in the approach and method for shift handover, to provide an independent, but rigorous approach to teaching these important skills. In this paper we present a virtual world simulator for students to practice key steps in handing over the 24/7 care requirements of intensive care patients during the commencing first hour of a shift. We describe the modelling process to provide a convincing interactive simulation of the handover steps involved. The virtual world provides a practice tool for students to test their analytical skills with scenarios previously provided by simple physical simulations, and live on the job training. Additional educational benefits include facilitation of remote learning, high flexibility in study hours and the automatic recording of a reviewable log from the session. To the best of our knowledge, we believe this is a novel and original application of virtual worlds to an ICU handover process. The major outcome of the work was a virtual world environment for training nurses in the shift handover process, designed and developed for use by postgraduate nurses in training. Copyright © 2012 Australian College of Critical Care Nurses Ltd. Published by Elsevier Ltd. All rights reserved.

Prototype software model for designing intruder detection systems with simulation

NASA Astrophysics Data System (ADS)

Smith, Jeffrey S.; Peters, Brett A.; Curry, James C.; Gupta, Dinesh

1998-08-01

This article explores using discrete-event simulation for the design and control of defence oriented fixed-sensor- based detection system in a facility housing items of significant interest to enemy forces. The key issues discussed include software development, simulation-based optimization within a modeling framework, and the expansion of the framework to create real-time control tools and training simulations. The software discussed in this article is a flexible simulation environment where the data for the simulation are stored in an external database and the simulation logic is being implemented using a commercial simulation package. The simulation assesses the overall security level of a building against various intruder scenarios. A series of simulation runs with different inputs can determine the change in security level with changes in the sensor configuration, building layout, and intruder/guard strategies. In addition, the simulation model developed for the design stage of the project can be modified to produce a control tool for the testing, training, and real-time control of systems with humans and sensor hardware in the loop.

Interprofessional Emergency Training Leads to Changes in the Workplace.

PubMed

Eisenmann, Dorothea; Stroben, Fabian; Gerken, Jan D; Exadaktylos, Aristomenis K; Machner, Mareen; Hautz, Wolf E

2018-01-01

Preventable mistakes occur frequently and can lead to patient harm and death. The emergency department (ED) is notoriously prone to such errors, and evidence suggests that improving teamwork is a key aspect to reduce the rate of error in acute care settings. Only a few strategies are in place to train team skills and communication in interprofessional situations. Our goal was to conceptualize, implement, and evaluate a training module for students of three professions involved in emergency care. The objective was to sensitize participants to barriers for their team skills and communication across professional borders. We developed a longitudinal simulation-enhanced training format for interprofessional teams, consisting of final-year medical students, advanced trainees of emergency nursing and student paramedics. The training format consisted of several one-day training modules, which took place twice in 2016 and 2017. Each training module started with an introduction to share one's roles, professional self-concepts, common misconceptions, and communication barriers. Next, we conducted different simulated cases. Each case consisted of a prehospital section (for paramedics and medical students), a handover (everyone), and an ED section (medical students and emergency nurses). After each training module, we assessed participants' "Commitment to Change." In this questionnaire, students were anonymously asked to state up to three changes that they wished to implement as a result of the course, as well as the strength of their commitment to these changes. In total, 64 of 80 participants (80.0%) made at least one commitment to change after participating in the training modules. The total of 123 commitments was evenly distributed over four emerging categories: communication , behavior , knowledge and attitude . Roughly one third of behavior- and attitude-related commitments were directly related to interprofessional topics (e.g., "acknowledge other professions' work"), and these were equally distributed among professions. At the two-month follow-up, 32 participants (50%) provided written feedback on their original commitments: 57 of 62 (91.9%) commitments were at least partly realized at the follow-up, and only five (8.1%) commitments lacked realization entirely. A structured simulation-enhanced intervention was successful in promoting change to the practice of emergency care, while training teamwork and communication skills jointly.

Research on Collaborative Technology in Distributed Virtual Reality System

NASA Astrophysics Data System (ADS)

Lei, ZhenJiang; Huang, JiJie; Li, Zhao; Wang, Lei; Cui, JiSheng; Tang, Zhi

2018-01-01

Distributed virtual reality technology applied to the joint training simulation needs the CSCW (Computer Supported Cooperative Work) terminal multicast technology to display and the HLA (high-level architecture) technology to ensure the temporal and spatial consistency of the simulation, in order to achieve collaborative display and collaborative computing. In this paper, the CSCW’s terminal multicast technology has been used to modify and expand the implementation framework of HLA. During the simulation initialization period, this paper has used the HLA statement and object management service interface to establish and manage the CSCW network topology, and used the HLA data filtering mechanism for each federal member to establish the corresponding Mesh tree. During the simulation running period, this paper has added a new thread for the RTI and the CSCW real-time multicast interactive technology into the RTI, so that the RTI can also use the window message mechanism to notify the application update the display screen. Through many applications of submerged simulation training in substation under the operation of large power grid, it is shown that this paper has achieved satisfactory training effect on the collaborative technology used in distributed virtual reality simulation.

Interventional radiology virtual simulator for liver biopsy.

PubMed

Villard, P F; Vidal, F P; ap Cenydd, L; Holbrey, R; Pisharody, S; Johnson, S; Bulpitt, A; John, N W; Bello, F; Gould, D

2014-03-01

Training in Interventional Radiology currently uses the apprenticeship model, where clinical and technical skills of invasive procedures are learnt during practice in patients. This apprenticeship training method is increasingly limited by regulatory restrictions on working hours, concerns over patient risk through trainees' inexperience and the variable exposure to case mix and emergencies during training. To address this, we have developed a computer-based simulation of visceral needle puncture procedures. A real-time framework has been built that includes: segmentation, physically based modelling, haptics rendering, pseudo-ultrasound generation and the concept of a physical mannequin. It is the result of a close collaboration between different universities, involving computer scientists, clinicians, clinical engineers and occupational psychologists. The technical implementation of the framework is a robust and real-time simulation environment combining a physical platform and an immersive computerized virtual environment. The face, content and construct validation have been previously assessed, showing the reliability and effectiveness of this framework, as well as its potential for teaching visceral needle puncture. A simulator for ultrasound-guided liver biopsy has been developed. It includes functionalities and metrics extracted from cognitive task analysis. This framework can be useful during training, particularly given the known difficulties in gaining significant practice of core skills in patients.

The role of virtual reality in surgical training in otorhinolaryngology.

PubMed

Fried, Marvin P; Uribe, José I; Sadoughi, Babak

2007-06-01

This article reviews the rationale, current status and future directions for the development and implementation of virtual reality surgical simulators as training tools. The complexity of modern surgical techniques, which utilize advanced technology, presents a dilemma for surgical training. Hands-on patient experience - the traditional apprenticeship method for teaching operations - may not apply because of the learning curve for skill acquisition and patient safety expectation. The paranasal sinuses and temporal bone have intricate anatomy with a significant amount of vital structures either within the surgical field or in close proximity. The current standard of surgical care in these areas involves the use of endoscopes, cameras and microscopes, requiring additional hand-eye coordination, an accurate command of fine motor skills, and a thorough knowledge of the anatomy under magnified vision. A surgeon's disorientation or loss of perspective can lead to complications, often catastrophic and occasionally lethal. These considerations define the ideal environment for surgical simulation; not surprisingly, significant research and validation of simulators in these areas have occurred. Virtual reality simulators are demonstrating validity as training and skills assessment tools. Future prototypes will find application for routine use in teaching, surgical planning and the development of new instruments and computer-assisted devices.

Virtual Reality Training System for Anytime/Anywhere Acquisition of Surgical Skills: A Pilot Study.

PubMed

Zahiri, Mohsen; Booton, Ryan; Nelson, Carl A; Oleynikov, Dmitry; Siu, Ka-Chun

2018-03-01

This article presents a hardware/software simulation environment suitable for anytime/anywhere surgical skills training. It blends the advantages of physical hardware and task analogs with the flexibility of virtual environments. This is further enhanced by a web-based implementation of training feedback accessible to both trainees and trainers. Our training system provides a self-paced and interactive means to attain proficiency in basic tasks that could potentially be applied across a spectrum of trainees from first responder field medical personnel to physicians. This results in a powerful training tool for surgical skills acquisition relevant to helping injured warfighters.

Code Team Training: Demonstrating Adherence to AHA Guidelines During Pediatric Code Blue Activations.

PubMed

Stewart, Claire; Shoemaker, Jamie; Keller-Smith, Rachel; Edmunds, Katherine; Davis, Andrew; Tegtmeyer, Ken

2017-10-16

Pediatric code blue activations are infrequent events with a high mortality rate despite the best effort of code teams. The best method for training these code teams is debatable; however, it is clear that training is needed to assure adherence to American Heart Association (AHA) Resuscitation Guidelines and to prevent the decay that invariably occurs after Pediatric Advanced Life Support training. The objectives of this project were to train a multidisciplinary, multidepartmental code team and to measure this team's adherence to AHA guidelines during code simulation. Multidisciplinary code team training sessions were held using high-fidelity, in situ simulation. Sessions were held several times per month. Each session was filmed and reviewed for adherence to 5 AHA guidelines: chest compression rate, ventilation rate, chest compression fraction, use of a backboard, and use of a team leader. After the first study period, modifications were made to the code team including implementation of just-in-time training and alteration of the compression team. Thirty-eight sessions were completed, with 31 eligible for video analysis. During the first study period, 1 session adhered to all AHA guidelines. During the second study period, after alteration of the code team and implementation of just-in-time training, no sessions adhered to all AHA guidelines; however, there was an improvement in percentage of sessions adhering to ventilation rate and chest compression rate and an improvement in median ventilation rate. We present a method for training a large code team drawn from multiple hospital departments and a method of assessing code team performance. Despite subjective improvement in code team positioning, communication, and role completion and some improvement in ventilation rate and chest compression rate, we failed to consistently demonstrate improvement in adherence to all guidelines.

A Simulation-Based Blended Curriculum for Short Peripheral Intravenous Catheter Insertion: An Industry-Practice Collaboration.

PubMed

Glover, Kevin R; Stahl, Brian R; Murray, Connie; LeClair, Matthew; Gallucci, Susan; King, Mary Anne; Labrozzi, Laura J; Schuster, Catherine; Keleekai, Nowai L

2017-09-01

Despite peripheral intravenous catheter (PIVC) insertion being a commonly performed skill, practicing nurses may receive little substantive education, training, or opportunities to practice this skill at a competent level. This article describes a collaboration between private industry and a hospital to modify, implement, and evaluate a simulation-based blended PIVC insertion continuing education program for staff nurses. Included is an overview of the practical and theoretical rationale for the initial development of the curriculum to address an identified PIVC insertion education gap, the collaborative modification and implementation of the program, and an evaluation of the program. The curriculum combined self-paced e-learning and classroom-based deliberate practice with simulation tools of varying fidelity in a peer-to-peer learning environment. Given the mutual challenges of resource allocation in industry training and clinical nursing education departments, interprofessional partnerships may be an effective option for sharing instructional knowledge and resources to promote innovation and improve patient care. J Contin Educ Nurs. 2017;48(9):397-406. Copyright 2017, SLACK Incorporated.

Palpation Simulator of Beating Aorta for Cardiovascular Surgery Training

NASA Astrophysics Data System (ADS)

Yamamoto, Yasuhiro; Nakao, Megumi; Kuroda, Tomohiro; Oyama, Hiroshi; Komori, Masaru; Matsuda, Tetsuya; Sakaguchi, Genichi; Komeda, Masashi; Takahashi, Takashi

In field of cardiovascular surgeries, palpation of aorta plays important roles in decision of surgical site.This paper develops palpation simulator of aorta based on a finite element based physical model.The proposed model calculates soft tissue deformation according to the affection of inner pressure and the operation of a surgeon.The proposed method is implemented on a prototype with dual PHANToM device.Experimental results confirmed our model achieves real time simulation of the surgical palpation.

Safer@home—Simulation and training: the study protocol of a qualitative action research design

PubMed Central

Wiig, Siri; Guise, Veslemøy; Anderson, Janet; Storm, Marianne; Lunde Husebø, Anne Marie; Testad, Ingelin; Søyland, Elsa; Moltu, Kirsti L

2014-01-01

Introduction While it is predicted that telecare and other information and communication technology (ICT)-assisted services will have an increasingly important role in future healthcare services, their implementation in practice is complex. For implementation of telecare to be successful and ensure quality of care, sufficient training for staff (healthcare professionals) and service users (patients) is fundamental. Telecare training has been found to have positive effects on attitudes to, sustained use of, and outcomes associated with telecare. However, the potential contribution of training in the adoption, quality and safety of telecare services is an under-investigated research field. The overall aim of this study is to develop and evaluate simulation-based telecare training programmes to aid the use of videophone technology in elderly home care. Research-based training programmes will be designed for healthcare professionals, service users and next of kin, and the study will explore the impact of training on adoption, quality and safety of new telecare services. Methods and analysis The study has a qualitative action research design. The research will be undertaken in close collaboration with a multidisciplinary team consisting of researchers and managers and clinical representatives from healthcare services in two Norwegian municipalities, alongside experts in clinical education and simulation, as well as service user (patient) representatives. The qualitative methods used involve focus group interviews, semistructured interviews, observation and document analysis. To ensure trustworthiness in the data analysis, we will apply member checks and analyst triangulation; in addition to providing contextual and sample description to allow for evaluation of transferability of our results to other contexts and groups. Ethics and dissemination The study is approved by the Norwegian Social Science Data Services. The study is based on voluntary participation and informed written consent. Informants can withdraw at any point in time. The results will be disseminated at research conferences, peer review journals, one PhD thesis and through public presentations to people outside the scientific community. PMID:25079924

Comparative analysis of the functionality of simulators of the da Vinci surgical robot.

PubMed

Smith, Roger; Truong, Mireille; Perez, Manuela

2015-04-01

The implementation of robotic technology in minimally invasive surgery has led to the need to develop more efficient and effective training methods, as well as assessment and skill maintenance tools for surgical education. Multiple simulators and procedures are available for educational and training purposes. A need for comparative evaluations of these simulators exists to aid users in selecting an appropriate device for their purposes. We conducted an objective review and comparison of the design and capabilities of all dedicated simulators of the da Vinci robot, the da Vinci Skill Simulator (DVSS) (Intuitive Surgical Inc., Sunnyvale, CA, USA), dV-Trainer (dVT) (Mimic Technologies Inc., Seattle, WA, USA), and Robotic Surgery Simulator (RoSS) (Simulated Surgical Skills, LLC, Williamsville, NY, USA). This provides base specifications of the hardware and software, with an emphasis on the training capabilities of each system. Each simulator contains a large number of training exercises, DVSS = 40, dVT = 65, and RoSS = 52 for skills development. All three offer 3D visual images but use different display technologies. The DVSS leverages the real robotic surgeon's console to provide visualization, hand controls, and foot pedals. The dVT and RoSS created simulated versions of all of these control systems. They include systems management services which allow instructors to collect, export, and analyze the scores of students using the simulators. This study is the first to provide comparative information of the three simulators functional capabilities with an emphasis on their educational skills. They offer unique advantages and capabilities in training robotic surgeons. Each device has been the subject of multiple validation experiments which have been published in the literature. But those do not provide specific details on the capabilities of the simulators which are necessary for an understanding sufficient to select the one best suited for an organization's needs.

Virtual physiological human: training challenges.

PubMed

Lawford, Patricia V; Narracott, Andrew V; McCormack, Keith; Bisbal, Jesus; Martin, Carlos; Bijnens, Bart; Brook, Bindi; Zachariou, Margarita; Freixa, Jordi Villà I; Kohl, Peter; Fletcher, Katherine; Diaz-Zuccarini, Vanessa

2010-06-28

The virtual physiological human (VPH) initiative encompasses a wide range of activities, including structural and functional imaging, data mining, knowledge discovery tool and database development, biomedical modelling, simulation and visualization. The VPH community is developing from a multitude of relatively focused, but disparate, research endeavours into an integrated effort to bring together, develop and translate emerging technologies for application, from academia to industry and medicine. This process initially builds on the evolution of multi-disciplinary interactions and abilities, but addressing the challenges associated with the implementation of the VPH will require, in the very near future, a translation of quantitative changes into a new quality of highly trained multi-disciplinary personnel. Current strategies for undergraduate and on-the-job training may soon prove insufficient for this. The European Commission seventh framework VPH network of excellence is exploring this emerging need, and is developing a framework of novel training initiatives to address the predicted shortfall in suitably skilled VPH-aware professionals. This paper reports first steps in the implementation of a coherent VPH training portfolio.

Cockpit Resource Management (CRM) training in the 1550th combat crew training wing

NASA Technical Reports Server (NTRS)

Fiedler, Michael T.

1987-01-01

The training program the 1550th Combat Crew Training Wing at Kirtland Air Force Base, New Mexico, implemented in September 1985 is discussed. The program is called Aircrew Coordination Training (ACT), and it is designed specifically to help aircrew members work more effectively as a team in their respective aircraft and hopefully to reduce human factors-related accidents. The scope of the 1550th CCTW's training responsibilities is described, the structure of the program, along with a brief look at the content of the academic part of the course. Then the Mission-Oriented Simulator Training (MOST) program is discussed; a program similar to the Line Oriented Flight Training (LOFT) programs. Finally, the future plans for the Aircrew Coordination Training Program at the 1550th is discussed.

An implementation of cellular automaton model for single-line train working diagram

NASA Astrophysics Data System (ADS)

Hua, Wei; Liu, Jun

2006-04-01

According to the railway transportation system's characteristics, a new cellular automaton model for the single-line railway system is presented in this paper. Based on this model, several simulations were done to imitate the train operation under three working diagrams. From a different angle the results show how the organization of train operation impacts on the railway carrying capacity. By using the non-parallel train working diagram the influence of fast-train on slow-train is found to be the strongest. Many slow-trains have to wait in-between neighbouring stations to let the fast-train(s) pass through first. So the slow-train will advance like a wave propagating from the departure station to the arrival station. This also resembles the situation of a highway jammed traffic flow. Furthermore, the nonuniformity of travel times between the sections also greatly limits the railway carrying capacity. After converting the nonuniform sections into the sections with uniform travel times while the total travel time is kept unchanged, all three carrying capacities are improved greatly as shown by simulation. It also shows that the cellular automaton model is an effective and feasible way to investigate the railway transportation system.

Cost analysis of objective resident cataract surgery assessments.

PubMed

Nandigam, Kiran; Soh, Jonathan; Gensheimer, William G; Ghazi, Ahmed; Khalifa, Yousuf M

2015-05-01

To compare 8 ophthalmology resident surgical training tools to determine which is most cost effective. University of Rochester Medical Center, Rochester, New York, USA. Retrospective evaluation of technology. A cost-analysis model was created to compile all relevant costs in running each tool in a medium-sized ophthalmology program. Quantitative cost estimates were obtained based on cost of tools, cost of time in evaluations, and supply and maintenance costs. For wet laboratory simulation, Eyesi was the least expensive cataract surgery simulation method; however, it is only capable of evaluating simulated cataract surgery rehearsal and requires supplementation with other evaluative methods for operating room performance and for noncataract wet lab training and evaluation. The most expensive training tool was the Eye Surgical Skills Assessment Test (ESSAT). The 2 most affordable methods for resident evaluation in operating room performance were the Objective Assessment of Skills in Intraocular Surgery (OASIS) and Global Rating Assessment of Skills in Intraocular Surgery (GRASIS). Cost-based analysis of ophthalmology resident surgical training tools are needed so residency programs can implement tools that are valid, reliable, objective, and cost effective. There is no perfect training system at this time. Copyright © 2015 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

Training monitoring skills in helicopter pilots.

PubMed

Potter, Brian A; Blickensderfer, Elizabeth L; Boquet, Albert J

2014-05-01

Prior research has indicated that ineffective pilot monitoring has been associated with aircraft accidents. Despite this finding, empirical research concerning pilot monitoring skill training programs is nearly nonexistent. E-learning may prove to be an effective method to foster nontechnical flight skills, including monitoring. This study examined the effect of using e-learning to enhance helicopter aircrew monitoring skill performance. The design was a posttest only field study. Forty-four helicopter pilots completed either an e-learning training module or a control activity and then flew two scenarios in a high-fidelity flight simulator. Learner reactions and knowledge gained were assessed immediately following the e-learning module. Two observer raters assessed behaviors and performance outcomes using recordings of the simulation flights. Subjects who completed the e-learning training module scored almost twice as high as did the control group on the administered knowledge test (experimental group, mean = 92.8%; control group, mean = 47.7%) and demonstrated up to 150% more monitoring behaviors during the simulated flights than the control subjects. In addition, the participating pilots rated the course highly. The results supported the hypothesis that a relatively inexpensive and brief training course implemented through e-learning can foster monitoring skill development among helicopter pilots.

Wind Energy System Time-domain (WEST) analyzers using hybrid simulation techniques

NASA Technical Reports Server (NTRS)

Hoffman, J. A.

1979-01-01

Two stand-alone analyzers constructed for real time simulation of the complex dynamic characteristics of horizontal-axis wind energy systems are described. Mathematical models for an aeroelastic rotor, including nonlinear aerodynamic and elastic loads, are implemented with high speed digital and analog circuitry. Models for elastic supports, a power train, a control system, and a rotor gimbal system are also included. Limited correlation efforts show good comparisons between results produced by the analyzers and results produced by a large digital simulation. The digital simulation results correlate well with test data.

Personality Characteristics and Teaching Behavior.

ERIC Educational Resources Information Center

Kurtz, Chaya; Kremer, Lya

1982-01-01

Investigates relationship between degree of dogmatism of 200 students from 4 Israeli teacher training programs and their behavior in educational situations and simulated situations involving discipline, program planning, and educational goals. Discusses differential perception and implementation of teaching programs by teachers of differing…

An extensive coronagraphic simulation applied to LBT

NASA Astrophysics Data System (ADS)

Vassallo, D.; Carolo, E.; Farinato, J.; Bergomi, M.; Bonavita, M.; Carlotti, A.; D'Orazi, V.; Greggio, D.; Magrin, D.; Mesa, D.; Pinna, E.; Puglisi, A.; Stangalini, M.; Verinaud, C.; Viotto, V.

2016-08-01

In this article we report the results of a comprehensive simulation program aimed at investigating coronagraphic capabilities of SHARK-NIR, a camera selected to proceed to the final design phase at Large Binocular Telescope. For the purpose, we developed a dedicated simulation tool based on physical optics propagation. The code propagates wavefronts through SHARK optical train in an end-to-end fashion and can implement any kind of coronagraph. Detection limits can be finally computed, exploring a wide range of Strehl values and observing conditions.

Development of a neural net paradigm that predicts simulator sickness

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allgood, G.O.

1993-03-01

A disease exists that affects pilots and aircrew members who use Navy Operational Flight Training Systems. This malady, commonly referred to as simulator sickness and whose symptomatology closely aligns with that of motion sickness, can compromise the use of these systems because of a reduced utilization factor, negative transfer of training, and reduction in combat readiness. A report is submitted that develops an artificial neural network (ANN) and behavioral model that predicts the onset and level of simulator sickness in the pilots and aircrews who sue these systems. It is proposed that the paradigm could be implemented in real timemore » as a biofeedback monitor to reduce the risk to users of these systems. The model captures the neurophysiological impact of use (human-machine interaction) by developing a structure that maps the associative and nonassociative behavioral patterns (learned expectations) and vestibular (otolith and semicircular canals of the inner ear) and tactile interaction, derived from system acceleration profiles, onto an abstract space that predicts simulator sickness for a given training flight.« less

Simulation of patient flow in multiple healthcare units using process and data mining techniques for model identification.

PubMed

Kovalchuk, Sergey V; Funkner, Anastasia A; Metsker, Oleg G; Yakovlev, Aleksey N

2018-06-01

An approach to building a hybrid simulation of patient flow is introduced with a combination of data-driven methods for automation of model identification. The approach is described with a conceptual framework and basic methods for combination of different techniques. The implementation of the proposed approach for simulation of the acute coronary syndrome (ACS) was developed and used in an experimental study. A combination of data, text, process mining techniques, and machine learning approaches for the analysis of electronic health records (EHRs) with discrete-event simulation (DES) and queueing theory for the simulation of patient flow was proposed. The performed analysis of EHRs for ACS patients enabled identification of several classes of clinical pathways (CPs) which were used to implement a more realistic simulation of the patient flow. The developed solution was implemented using Python libraries (SimPy, SciPy, and others). The proposed approach enables more a realistic and detailed simulation of the patient flow within a group of related departments. An experimental study shows an improved simulation of patient length of stay for ACS patient flow obtained from EHRs in Almazov National Medical Research Centre in Saint Petersburg, Russia. The proposed approach, methods, and solutions provide a conceptual, methodological, and programming framework for the implementation of a simulation of complex and diverse scenarios within a flow of patients for different purposes: decision making, training, management optimization, and others. Copyright © 2018 Elsevier Inc. All rights reserved.

The Modified, Multi-patient Observed Simulated Handoff Experience (M-OSHE): Assessment and Feedback for Entering Residents on Handoff Performance.

PubMed

Gaffney, Sean; Farnan, Jeanne M; Hirsch, Kristen; McGinty, Michael; Arora, Vineet M

2016-04-01

Despite the identification of transfer of patient responsibility as a Core Entrustable Professional Activity for Entering Residency, rigorous methods to evaluate incoming residents' ability to give a verbal handoff of multiple patients are lacking. Our purpose was to implement a multi-patient, simulation-based curriculum to assess verbal handoff performance. Graduate Medical Education (GME) orientation at an urban, academic medical center. Eighty-four incoming residents from four residency programs participated in the study. The curriculum featured an online training module and a multi-patient observed simulated handoff experience (M-OSHE). Participants verbally "handed off" three mock patients of varying acuity and were evaluated by a trained "receiver" using an expert-informed, five-item checklist. Prior handoff experience in medical school was associated with higher checklist scores (23% none vs. 33% either third OR fourth year vs. 58% third AND fourth year, p = 0.021). Prior training was associated with prioritization of patients based on acuity (12% no training vs. 38% prior training, p = 0.014). All participants agreed that the M-OSHE realistically portrayed a clinical setting. The M-OSHE is a promising strategy for teaching and evaluating entering residents' ability to give verbal handoffs of multiple patients. Prior training and more handoff experience was associated with higher performance, which suggests that additional handoff training in medical school may be of benefit.

14 CFR 1266.102 - Cross-waiver of liability for agreements for activities related to the International Space Station.

Code of Federal Regulations, 2010 CFR

2010-01-01

... services; and (ii) All activities related to ground support, test, training, simulation, or guidance and... payload's product or process for use other than for ISS-related activities in implementation of the IGA...

Using local clinical educators and shared resources to deliver simulation training activities across rural and remote South Australia and south-west Victoria: A distributed collaborative model.

PubMed

Masters, Stacey C; Elliott, Sandi; Boyd, Sarah; Dunbar, James A

2017-10-01

There is a lack of access to simulation-based education (SBE) for professional entry students (PES) and health professionals at rural and remote locations. A descriptive study. Health and education facilities in regional South Australia and south-west Victoria. Number of training recipients who participated in SBE; geographical distribution and locations where SBE was delivered; number of rural clinical educators providing SBE. A distributed model to deliver SBE in rural and remote locations in collaboration with local health and community services, education providers and the general public. Face-to-face meetings with health services and education providers identified gaps in locally delivered clinical skills training and availability of simulation resources. Clinical leadership, professional development and community of practice strategies were implemented to enhance capacity of rural clinical educators to deliver SBE. The number of SBE participants and training hours delivered exceeded targets. The distributed model enabled access to regular, localised training for PES and health professionals, minimising travel and staff backfill costs incurred when attending regional centres. The skills acquired by local educators remain in rural areas to support future training. The distributed collaborative model substantially increased access to clinical skills training for PES and health professionals in rural and remote locations. Developing the teaching skills of rural clinicians optimised the use of simulation resources. Consequently, health services were able to provide students with flexible and realistic learning opportunities in clinical procedures, communication techniques and teamwork skills. © 2017 National Rural Health Alliance Inc.

Voluntary autonomous simulator based training in minimally invasive surgery, residents' compliance and reflection.

PubMed

van Empel, Pieter J; Verdam, Mathilde G E; Strypet, Magnus; van Rijssen, Lennart B; Huirne, Judith A; Scheele, Fedde; Bonjer, H Jaap; Meijerink, W Jeroen

2012-01-01

Knot tying and suturing skills in minimally invasive surgery (MIS) differ markedly from those in open surgery. Appropriate MIS training is mandatory before implementation into practice. The Advanced Suturing Course (ASC) is a structured simulator based training course that includes a 6-week autonomous training period at home on a traditional laparoscopic box trainer. Previous research did not demonstrate a significant progress in laparoscopic skills after this training period. This study aims to identify factors determining autonomous training on a laparoscopic box trainer at home. Residents (n = 97) attending 1 of 7 ASC courses between January 2009 and June 2011 were consecutively included. After 6 weeks of autonomous, training a questionnaire was completed. A random subgroup of 30 residents was requested to keep a time log. All residents received an online survey after attending the ASC. We performed outcome comparison to examine the accuracy of individual responses. Out of 97 residents, the main motives for noncompliant autonomous training included a lack of (training) time after working hours (n = 80, 83.3%), preferred practice time during working hours (n = 76, 31.6%), or another surgical interest than MIS (n = 79, 15.2%). Previously set training goals would encourage autonomous training according to 27.8% (n = 18) of residents. Thirty participants submitted a time log and reported an average 76.5-minute weekly training time. All residents confirmed that autonomous home practice on a laparoscopic box trainer is valuable. Autonomous practice should be structured and inclusive of adequate and sufficient feedback points. A minimally required practice time should be set. An obligatory assessment, including corresponding consequence should be conducted. Compliance herewith may result in increased voluntary (autonomous) simulator based (laparoscopic) training by residents. Copyright © 2012 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Contrast reaction training in US radiology residencies: a COARDRI study.

PubMed

LeBedis, Christina A; Rosenkrantz, Andrew B; Otero, Hansel J; Decker, Summer J; Ward, Robert J

To perform a survey-based assessment of current contrast reaction training in US diagnostic radiology residency programs. An electronic survey was distributed to radiology residency program directors from 9/2015-11/2015. 25.7% of programs responded. 95.7% of those who responded provide contrast reaction management training. 89.4% provide didactic lectures (occurring yearly in 71.4%). 37.8% provide hands-on simulation training (occurring yearly in 82.3%; attended by both faculty and trainees in 52.9%). Wide variability in contrast reaction education in US diagnostic radiology residency programs reveals an opportunity to develop and implement a national curriculum. Copyright © 2017 Elsevier Inc. All rights reserved.

Can Driving-Simulator Training Enhance Visual Attention, Cognition, and Physical Functioning in Older Adults?

PubMed

Haeger, Mathias; Bock, Otmar; Memmert, Daniel; Hüttermann, Stefanie

2018-01-01

Virtual reality offers a good possibility for the implementation of real-life tasks in a laboratory-based training or testing scenario. Thus, a computerized training in a driving simulator offers an ecological valid training approach. Visual attention had an influence on driving performance, so we used the reverse approach to test the influence of a driving training on visual attention and executive functions. Thirty-seven healthy older participants (mean age: 71.46 ± 4.09; gender: 17 men and 20 women) took part in our controlled experimental study. We examined transfer effects from a four-week driving training (three times per week) on visual attention, executive function, and motor skill. Effects were analyzed using an analysis of variance with repeated measurements. Therefore, main factors were group and time to show training-related benefits of our intervention. Results revealed improvements for the intervention group in divided visual attention; however, there were benefits neither in the other cognitive domains nor in the additional motor task. Thus, there are no broad training-induced transfer effects from such an ecologically valid training regime. This lack of findings could be addressed to insufficient training intensities or a participant-induced bias following the cancelled randomization process.

Preoperative surgical rehearsal using cadaveric fresh tissue surgical simulation increases resident operative confidence.

PubMed

Weber, Erin L; Leland, Hyuma A; Azadgoli, Beina; Minneti, Michael; Carey, Joseph N

2017-08-01

Rehearsal is an essential part of mastering any technical skill. The efficacy of surgical rehearsal is currently limited by low fidelity simulation models. Fresh cadaver models, however, offer maximal surgical simulation. We hypothesize that preoperative surgical rehearsal using fresh tissue surgical simulation will improve resident confidence and serve as an important adjunct to current training methods. Preoperative rehearsal of surgical procedures was performed by plastic surgery residents using fresh cadavers in a simulated operative environment. Rehearsal was designed to mimic the clinical operation, complete with a surgical technician to assist. A retrospective, web-based survey was used to assess resident perception of pre- and post-procedure confidence, preparation, technique, speed, safety, and anatomical knowledge on a 5-point scale (1= not confident, 5= very confident). Twenty-six rehearsals were performed by 9 residents (PGY 1-7) an average of 4.7±2.1 days prior to performance of the scheduled operation. Surveys demonstrated a median pre-simulation confidence score of 2 and a post-rehearsal score of 4 (P<0.01). The perceived improvement in confidence and performance was greatest when simulation was performed within 3 days of the scheduled case. All residents felt that cadaveric simulation was better than standard preparation methods of self-directed reading or discussion with other surgeons. All residents believed that their technique, speed, safety, and anatomical knowledge improved as a result of simulation. Fresh tissue-based preoperative surgical rehearsal was effectively implemented in the residency program. Resident confidence and perception of technique improved. Survey results suggest that cadaveric simulation is beneficial for all levels of residents. We believe that implementation of preoperative surgical rehearsal is an effective adjunct to surgical training at all skill levels in the current environment of decreased work hours.

Reward-based learning under hardware constraints-using a RISC processor embedded in a neuromorphic substrate.

PubMed

Friedmann, Simon; Frémaux, Nicolas; Schemmel, Johannes; Gerstner, Wulfram; Meier, Karlheinz

2013-01-01

In this study, we propose and analyze in simulations a new, highly flexible method of implementing synaptic plasticity in a wafer-scale, accelerated neuromorphic hardware system. The study focuses on globally modulated STDP, as a special use-case of this method. Flexibility is achieved by embedding a general-purpose processor dedicated to plasticity into the wafer. To evaluate the suitability of the proposed system, we use a reward modulated STDP rule in a spike train learning task. A single layer of neurons is trained to fire at specific points in time with only the reward as feedback. This model is simulated to measure its performance, i.e., the increase in received reward after learning. Using this performance as baseline, we then simulate the model with various constraints imposed by the proposed implementation and compare the performance. The simulated constraints include discretized synaptic weights, a restricted interface between analog synapses and embedded processor, and mismatch of analog circuits. We find that probabilistic updates can increase the performance of low-resolution weights, a simple interface between analog synapses and processor is sufficient for learning, and performance is insensitive to mismatch. Further, we consider communication latency between wafer and the conventional control computer system that is simulating the environment. This latency increases the delay, with which the reward is sent to the embedded processor. Because of the time continuous operation of the analog synapses, delay can cause a deviation of the updates as compared to the not delayed situation. We find that for highly accelerated systems latency has to be kept to a minimum. This study demonstrates the suitability of the proposed implementation to emulate the selected reward modulated STDP learning rule. It is therefore an ideal candidate for implementation in an upgraded version of the wafer-scale system developed within the BrainScaleS project.

Reward-based learning under hardware constraints—using a RISC processor embedded in a neuromorphic substrate

PubMed Central

Friedmann, Simon; Frémaux, Nicolas; Schemmel, Johannes; Gerstner, Wulfram; Meier, Karlheinz

2013-01-01

In this study, we propose and analyze in simulations a new, highly flexible method of implementing synaptic plasticity in a wafer-scale, accelerated neuromorphic hardware system. The study focuses on globally modulated STDP, as a special use-case of this method. Flexibility is achieved by embedding a general-purpose processor dedicated to plasticity into the wafer. To evaluate the suitability of the proposed system, we use a reward modulated STDP rule in a spike train learning task. A single layer of neurons is trained to fire at specific points in time with only the reward as feedback. This model is simulated to measure its performance, i.e., the increase in received reward after learning. Using this performance as baseline, we then simulate the model with various constraints imposed by the proposed implementation and compare the performance. The simulated constraints include discretized synaptic weights, a restricted interface between analog synapses and embedded processor, and mismatch of analog circuits. We find that probabilistic updates can increase the performance of low-resolution weights, a simple interface between analog synapses and processor is sufficient for learning, and performance is insensitive to mismatch. Further, we consider communication latency between wafer and the conventional control computer system that is simulating the environment. This latency increases the delay, with which the reward is sent to the embedded processor. Because of the time continuous operation of the analog synapses, delay can cause a deviation of the updates as compared to the not delayed situation. We find that for highly accelerated systems latency has to be kept to a minimum. This study demonstrates the suitability of the proposed implementation to emulate the selected reward modulated STDP learning rule. It is therefore an ideal candidate for implementation in an upgraded version of the wafer-scale system developed within the BrainScaleS project. PMID:24065877

A Virtual Reality System for PTCD Simulation Using Direct Visuo-Haptic Rendering of Partially Segmented Image Data.

PubMed

Fortmeier, Dirk; Mastmeyer, Andre; Schröder, Julian; Handels, Heinz

2016-01-01

This study presents a new visuo-haptic virtual reality (VR) training and planning system for percutaneous transhepatic cholangio-drainage (PTCD) based on partially segmented virtual patient models. We only use partially segmented image data instead of a full segmentation and circumvent the necessity of surface or volume mesh models. Haptic interaction with the virtual patient during virtual palpation, ultrasound probing and needle insertion is provided. Furthermore, the VR simulator includes X-ray and ultrasound simulation for image-guided training. The visualization techniques are GPU-accelerated by implementation in Cuda and include real-time volume deformations computed on the grid of the image data. Computation on the image grid enables straightforward integration of the deformed image data into the visualization components. To provide shorter rendering times, the performance of the volume deformation algorithm is improved by a multigrid approach. To evaluate the VR training system, a user evaluation has been performed and deformation algorithms are analyzed in terms of convergence speed with respect to a fully converged solution. The user evaluation shows positive results with increased user confidence after a training session. It is shown that using partially segmented patient data and direct volume rendering is suitable for the simulation of needle insertion procedures such as PTCD.

Echocardiography for Intraoperative Decision Making in Mitral Valve Surgery-A Pilot Simulation-Based Training Module.

PubMed

Morais, Rex Joseph; Ashokka, Balakrishnan; Paranjothy, Suresh; Siau, Chiang; Ti, Lian Kah

2017-10-01

Echocardiographic assessment of the repaired or replaced mitral valve intraoperatively involves making a high-impact joint decision with the surgeon, in a time-sensitive manner, in a dynamic clinical situation. These decisions have to take into account the degree of imperfection if any, the likelihood of obtaining a better result, the underlying condition of the patient, and the impact of a longer cardiopulmonary bypass period if the decision is made to reintervene. Traditional echocardiography teaching is limited in its ability to provide this training. The authors report the development and implementation of a training module simulating the dynamic clinical environment of a mitral valve surgery in progress and the critical echo-based intraoperative decision making involved in the assessment of the acceptability of the surgical result. Copyright © 2017 Elsevier Inc. All rights reserved.

Foundational Elements of Applied Simulation Theory: Development and Implementation of a Longitudinal Simulation Educator Curriculum

PubMed Central

Posner, Glenn; Humphrey-Murto, Susan

2017-01-01

Simulation-based education has gained popularity, yet many faculty members feel inadequately prepared to teach using this technique. Fellowship training in medical education exists, but there is little information regarding simulation or formal educational programs therein. In our institution, simulation fellowships were offered by individual clinical departments. We recognized the need for a formal curriculum in educational theory. Kern’s approach to curriculum development was used to develop, implement, and evaluate the Foundational Elements of Applied Simulation Theory (FEAST) curriculum. Needs assessments resulted in a 26-topic curriculum; each biweekly session built upon the previous. Components essential to success included setting goals and objectives for each interactive session and having dedicated faculty, collaborative leadership and administrative support for the curriculum. Evaluation data was collated and analyzed annually via anonymous feedback surveys, focus groups, and retrospective pre-post self-assessment questionnaires. Data collected from 32 fellows over five years of implementation showed that the curriculum improved knowledge, challenged thinking, and was excellent preparation for a career in simulation-based medical education. Themes arising from focus groups demonstrated that participants valued faculty expertise and the structure, practicality, and content of the curriculum. We present a longitudinal simulation educator curriculum that adheres to a well-described framework of curriculum development. Program evaluation shows that FEAST has increased participant knowledge in key areas relevant to simulation-based education and that the curriculum has been successful in meeting the needs of novice simulation educators. Insights and practice points are offered for educators wishing to implement a similar curriculum in their institution. PMID:28280655

Foundational Elements of Applied Simulation Theory: Development and Implementation of a Longitudinal Simulation Educator Curriculum.

PubMed

Chiu, Michelle; Posner, Glenn; Humphrey-Murto, Susan

2017-01-27

Simulation-based education has gained popularity, yet many faculty members feel inadequately prepared to teach using this technique. Fellowship training in medical education exists, but there is little information regarding simulation or formal educational programs therein. In our institution, simulation fellowships were offered by individual clinical departments. We recognized the need for a formal curriculum in educational theory. Kern's approach to curriculum development was used to develop, implement, and evaluate the Foundational Elements of Applied Simulation Theory (FEAST) curriculum. Needs assessments resulted in a 26-topic curriculum; each biweekly session built upon the previous. Components essential to success included setting goals and objectives for each interactive session and having dedicated faculty, collaborative leadership and administrative support for the curriculum. Evaluation data was collated and analyzed annually via anonymous feedback surveys, focus groups, and retrospective pre-post self-assessment questionnaires. Data collected from 32 fellows over five years of implementation showed that the curriculum improved knowledge, challenged thinking, and was excellent preparation for a career in simulation-based medical education. Themes arising from focus groups demonstrated that participants valued faculty expertise and the structure, practicality, and content of the curriculum. We present a longitudinal simulation educator curriculum that adheres to a well-described framework of curriculum development. Program evaluation shows that FEAST has increased participant knowledge in key areas relevant to simulation-based education and that the curriculum has been successful in meeting the needs of novice simulation educators. Insights and practice points are offered for educators wishing to implement a similar curriculum in their institution.

Collaboration Between Academia and Practice: Interprofessional Crises Leadership and Disaster Management.

PubMed

Hoying, Cheryl; Farra, Sharon; Mainous, Rosalie; Baute, Rebecca; Gneuhs, Matthew

2017-02-01

An innovative interprofessional disaster preparedness program was designed and implemented through an academic-practice partnership between a large midwestern children's hospital and a community-based state university. This course was part of a constellation of courses developed in response to Presidential Directive (HSPD) 8, a mandate to standardize disaster response training that was issued after the inefficiencies following Hurricane Katrina. A hybrid immersive and didactic approach was used to train senior leadership and frontline clinicians. Included were simulated experiences at the National Center for Medical Readiness, a workshop, and online modules. The program that focused on crisis leadership and disaster management was developed and implemented to serve patient-centered organizations.

Residents' perspectives of the value of a simulation curriculum in a general surgery residency program: a multimethod study of stakeholder feedback.

PubMed

Wehbe-Janek, Hania; Colbert, Colleen Y; Govednik-Horny, Cara; White, Bobbie Ann A; Thomas, Scott; Shabahang, Mohsen

2012-06-01

Simulation has altered surgical curricula throughout residency programs. The purpose of this multimethod study was to explore residents' perceptions of simulation within surgical residency as relevant stakeholder feedback and program evaluation of the surgery simulation curriculum. Focus groups were held with a sample of surgery residents (n = 25) at a university-affiliated program. Residents participated in focus groups based on level of training and completed questionnaires regarding simulation curricula. Groups were facilitated by nonsurgeon faculty. Residents were asked: "What is the role of simulation in surgical education?" An interdisciplinary team recorded narrative data and performed content analyses. Quantitative data from questionnaires were summarized using descriptive statistics and frequencies. Major themes from the qualitative data included: concerns regarding simulation in surgical education (28%), exposure to situations and technical skills in a low-stress learning environment (24%), pressure by external agencies (19%), an educational tool (17%), and quality assurance for patient care (12%). Laparoscopy and cadaver lab were the most prevalent simulation training during residency, in addition to trauma simulations, central lines/chest tubes/IV access, and stapling lab. In response to the statement: "ACGME should require a simulation curriculum in surgery residency," 52.1% responded favorably and 47.8% responded nonfavorably. Residents acknowledge the value of simulation in patient safety, quality, and exposure to procedures before clinical experience, but remain divided on efficacy and requirement of simulation within curricula. The greater challenge to residency programs may be strategic implementation of simulation curricula within the right training context. Copyright © 2012 Mosby, Inc. All rights reserved.

Neurosurgery simulation in residency training: feasibility, cost, and educational benefit.

PubMed

Gasco, Jaime; Holbrook, Thomas J; Patel, Achal; Smith, Adrian; Paulson, David; Muns, Alan; Desai, Sohum; Moisi, Marc; Kuo, Yong-Fan; Macdonald, Bart; Ortega-Barnett, Juan; Patterson, Joel T

2013-10-01

The effort required to introduce simulation in neurosurgery academic programs and the benefits perceived by residents have not been systematically assessed. To create a neurosurgery simulation curriculum encompassing basic and advanced skills, cadaveric dissection, cranial and spine surgery simulation, and endovascular and computerized haptic training. A curriculum with 68 core exercises per academic year was distributed in individualized sets of 30 simulations to 6 neurosurgery residents. The total number of procedures completed during the academic year was set to 180. The curriculum includes 79 simulations with physical models, 57 cadaver dissections, and 44 haptic/computerized sessions. Likert-type evaluations regarding self-perceived performance were completed after each exercise. Subject identification was blinded to junior (postgraduate years 1-3) or senior resident (postgraduate years 4-6). Wilcoxon rank testing was used to detect differences within and between groups. One hundred eighty procedures and surveys were analyzed. Junior residents reported proficiency improvements in 82% of simulations performed (P < .001). Senior residents reported improvement in 42.5% of simulations (P < .001). Cadaver simulations accrued the highest reported benefit (71.5%; P < .001), followed by physical simulators (63.8%; P < .001) and haptic/computerized (59.1; P < .001). Initial cost is $341,978.00, with $27,876.36 for annual operational expenses. The systematic implementation of a simulation curriculum in a neurosurgery training program is feasible, is favorably regarded, and has a positive impact on trainees of all levels, particularly in junior years. All simulation forms, cadaver, physical, and haptic/computerized, have a role in different stages of learning and should be considered in the development of an educational simulation program.

MS&G, When Worlds Collide: A Primer for Potential

DTIC Science & Technology

2006-07-01

managers must take a close look at the feature-set they hope to implement, and as a general rule of thumb, the more un- knowns, risks, and innovations ...James Paul . “What Would a State of the Art Instructional Video Game Look Like?” Innovate , Aug/Sept 2005, vol. 1, no. 6. www.innovateonline.info... Paul , Christopher, et al. Implementing and Evaluating an Innovative Approach to Simulation Training Acquisitions. Rand National Defense Research

Interprofessional Emergency Training Leads to Changes in the Workplace

PubMed Central

Eisenmann, Dorothea; Stroben, Fabian; Gerken, Jan D.; Exadaktylos, Aristomenis K.; Machner, Mareen; Hautz, Wolf E.

2018-01-01

Introduction Preventable mistakes occur frequently and can lead to patient harm and death. The emergency department (ED) is notoriously prone to such errors, and evidence suggests that improving teamwork is a key aspect to reduce the rate of error in acute care settings. Only a few strategies are in place to train team skills and communication in interprofessional situations. Our goal was to conceptualize, implement, and evaluate a training module for students of three professions involved in emergency care. The objective was to sensitize participants to barriers for their team skills and communication across professional borders. Methods We developed a longitudinal simulation-enhanced training format for interprofessional teams, consisting of final-year medical students, advanced trainees of emergency nursing and student paramedics. The training format consisted of several one-day training modules, which took place twice in 2016 and 2017. Each training module started with an introduction to share one’s roles, professional self-concepts, common misconceptions, and communication barriers. Next, we conducted different simulated cases. Each case consisted of a prehospital section (for paramedics and medical students), a handover (everyone), and an ED section (medical students and emergency nurses). After each training module, we assessed participants’ “Commitment to Change.” In this questionnaire, students were anonymously asked to state up to three changes that they wished to implement as a result of the course, as well as the strength of their commitment to these changes. Results In total, 64 of 80 participants (80.0%) made at least one commitment to change after participating in the training modules. The total of 123 commitments was evenly distributed over four emerging categories: communication, behavior, knowledge and attitude. Roughly one third of behavior- and attitude-related commitments were directly related to interprofessional topics (e.g., “acknowledge other professions’ work”), and these were equally distributed among professions. At the two-month follow-up, 32 participants (50%) provided written feedback on their original commitments: 57 of 62 (91.9%) commitments were at least partly realized at the follow-up, and only five (8.1%) commitments lacked realization entirely. Conclusion A structured simulation-enhanced intervention was successful in promoting change to the practice of emergency care, while training teamwork and communication skills jointly. PMID:29383079

What can virtual patient simulation offer mental health nursing education?

PubMed

Guise, V; Chambers, M; Välimäki, M

2012-06-01

This paper discusses the use of simulation in nursing education and training, including potential benefits and barriers associated with its use. In particular, it addresses the hitherto scant application of diverse simulation devices and dedicated simulation scenarios in psychiatric and mental health nursing. It goes on to describe a low-cost, narrative-based virtual patient simulation technique which has the potential for wide application within health and social care education. An example of the implementation of this technology in a web-based pilot course for acute mental health nurses is given. This particular virtual patient technique is a simulation type ideally suited to promoting essential mental health nursing skills such as critical thinking, communication and decision making. Furthermore, it is argued that it is particularly amenable to e-learning and blended learning environments, as well as being an apt tool where multilingual simulations are required. The continued development, implementation and evaluation of narrative virtual patient simulations across a variety of health and social care programmes would help ascertain their success as an educational tool. © 2011 Blackwell Publishing.

Modelling compensated antiferromagnetic interfaces with MuMax3

NASA Astrophysics Data System (ADS)

De Clercq, Jonas; Leliaert, Jonathan; Van Waeyenberge, Bartel

2017-10-01

We show how compensated antiferromagnetic interfaces can be implemented in the micromagnetic simulation program MuMax3. We demonstrate that we can model spin flop coupling as a uniaxial anisotropy for small canting angles and how we can take into account the exact energy terms for strong coupling between a ferromagnet and a compensated antiferromagnet. We also investigate athermal training in biaxial antiferromagnets and reproduce the training effect in a polycrystalline IrMn/CoFe bilayer.

In vivo biomechanical measurement and haptic simulation of portal placement procedure in shoulder arthroscopic surgery

PubMed Central

Chae, Sanghoon; Jung, Sung-Weon

2018-01-01

A survey of 67 experienced orthopedic surgeons indicated that precise portal placement was the most important skill in arthroscopic surgery. However, none of the currently available virtual reality simulators include simulation / training in portal placement, including haptic feedback of the necessary puncture force. This study aimed to: (1) measure the in vivo force and stiffness during a portal placement procedure in an actual operating room and (2) implement active haptic simulation of a portal placement procedure using the measured in vivo data. We measured the force required for port placement and the stiffness of the joint capsule during portal placement procedures performed by an experienced arthroscopic surgeon. Based on the acquired mechanical property values, we developed a cable-driven active haptic simulator designed to train the portal placement skill and evaluated the validity of the simulated haptics. Ten patients diagnosed with rotator cuff tears were enrolled in this experiment. The maximum peak force and joint capsule stiffness during posterior portal placement procedures were 66.46 (±10.76N) and 2560.82(±252.92) N/m, respectively. We then designed an active haptic simulator using the acquired data. Our cable-driven mechanism structure had a friction force of 3.763 ± 0.341 N, less than 6% of the mean puncture force. Simulator performance was evaluated by comparing the target stiffness and force with the stiffness and force reproduced by the device. R-squared values were 0.998 for puncture force replication and 0.902 for stiffness replication, indicating that the in vivo data can be used to implement a realistic haptic simulator. PMID:29494691

Simulating the dynamic behavior of a vertical axis wind turbine operating in unsteady conditions

NASA Astrophysics Data System (ADS)

Battisti, L.; Benini, E.; Brighenti, A.; Soraperra, G.; Raciti Castelli, M.

2016-09-01

The present work aims at assessing the reliability of a simulation tool capable of computing the unsteady rotational motion and the associated tower oscillations of a variable speed VAWT immersed in a coherent turbulent wind. As a matter of fact, since the dynamic behaviour of a variable speed turbine strongly depends on unsteady wind conditions (wind gusts), a steady state approach can't accurately catch transient correlated issues. The simulation platform proposed here is implemented using a lumped mass approach: the drive train is described by resorting to both the polar inertia and the angular position of rotating parts, also considering their speed and acceleration, while rotor aerodynamic is based on steady experimental curves. The ultimate objective of the presented numerical platform is the simulation of transient phenomena, driven by turbulence, occurring during rotor operation, with the aim of supporting the implementation of efficient and robust control algorithms.

A Real-Time Telemetry Simulator of the IUS Spacecraft

NASA Technical Reports Server (NTRS)

Drews, Michael E.; Forman, Douglas A.; Baker, Damon M.; Khazoyan, Louis B.; Viazzo, Danilo

1998-01-01

A real-time telemetry simulator of the IUS spacecraft has recently entered operation to train Flight Control Teams for the launch of the AXAF telescope from the Shuttle. The simulator has proven to be a successful higher fidelity implementation of its predecessor, while affirming the rapid development methodology used in its design. Although composed of COTS hardware and software, the system simulates the full breadth of the mission: Launch, Pre-Deployment-Checkout, Burn Sequence, and AXAF/IUS separation. Realism is increased through patching the system into the operations facility to simulate IUS telemetry, Shuttle telemetry, and the Tracking Station link (commands and status message).

Virtual reality simulator: demonstrated use in neurosurgical oncology.

PubMed

Clarke, David B; D'Arcy, Ryan C N; Delorme, Sebastien; Laroche, Denis; Godin, Guy; Hajra, Sujoy Ghosh; Brooks, Rupert; DiRaddo, Robert

2013-04-01

The overriding importance of patient safety, the complexity of surgical techniques, and the challenges associated with teaching surgical trainees in the operating room are all factors driving the need for innovative surgical simulation technologies. Despite these issues, widespread use of virtual reality simulation technology in surgery has not been fully implemented, largely because of the technical complexities in developing clinically relevant and useful models. This article describes the successful use of the NeuroTouch neurosurgical simulator in the resection of a left frontal meningioma. The widespread application of surgical simulation technology has the potential to decrease surgical risk, improve operating room efficiency, and fundamentally change surgical training.

The role of simulation in neurosurgical education: a survey of 99 United States neurosurgery program directors.

PubMed

Ganju, Aruna; Aoun, Salah G; Daou, Marc R; El Ahmadieh, Tarek Y; Chang, Alice; Wang, Lucy; Batjer, H Hunt; Bendok, Bernard R

2013-11-01

With the reduction of resident work hours and the increasing focus on patient safety, it has become evident that simulation has a growing role to play in surgical education. We surveyed the program directors of 99 U.S. Neurosurgery programs in an effort to better understand how simulation can be implemented in Neurosurgery and to gain insight into key issues that are currently being discussed amongst Neurosurgical educators. A 14-item questionnaire was emailed to 99 Neurosurgery residency program directors. Questions assessed the clinical impact of simulation, the role of simulation in academia, the investments required in time and money, and the model best suited for simulation. The survey response rate was 53.5%. Seventy-two percent of respondents believed that simulation would improve patient outcome, 74% that it could supplement conventional training, but only 25% that it could replace it. The majority strongly believed that it could help preparing complex cases and could be of use to attending faculty. Forty-five percent thought that residents should achieve pre-defined levels of proficiency on simulators before working on patients. Seventy-four percent of respondents declared they would make simulator practice mandatory if available, and the majority was willing to invest daily time and considerable funds on simulators. Cadavers were the least preferred models to use compared to virtual simulation and noncadaveric physical models. Simulation should be integrated in Neurosurgery training curricula. The validation of available tools is the next step that will enable the training, acquisition, and testing of neurosurgical skills. Copyright © 2013 Elsevier Inc. All rights reserved.

Instructor feedback versus no instructor feedback on performance in a laparoscopic virtual reality simulator: a randomized educational trial.

PubMed

Oestergaard, Jeanett; Bjerrum, Flemming; Maagaard, Mathilde; Winkel, Per; Larsen, Christian Rifbjerg; Ringsted, Charlotte; Gluud, Christian; Grantcharov, Teodor; Ottesen, Bent; Soerensen, Jette Led

2012-02-28

Several studies have found a positive effect on the learning curve as well as the improvement of basic psychomotor skills in the operating room after virtual reality training. Despite this, the majority of surgical and gynecological departments encounter hurdles when implementing this form of training. This is mainly due to lack of knowledge concerning the time and human resources needed to train novice surgeons to an adequate level. The purpose of this trial is to investigate the impact of instructor feedback regarding time, repetitions and self-perception when training complex operational tasks on a virtual reality simulator. The study population consists of medical students on their 4th to 6th year without prior laparoscopic experience. The study is conducted in a skills laboratory at a centralized university hospital. Based on a sample size estimation 98 participants will be randomized to an intervention group or a control group. Both groups have to achieve a predefined proficiency level when conducting a laparoscopic salpingectomy using a surgical virtual reality simulator. The intervention group receives standardized instructor feedback of 10 to 12 min a maximum of three times. The control group receives no instructor feedback. Both groups receive the automated feedback generated by the virtual reality simulator. The study follows the CONSORT Statement for randomized trials. Main outcome measures are time and repetitions to reach the predefined proficiency level on the simulator. We include focus on potential sex differences, computer gaming experience and self-perception. The findings will contribute to a better understanding of optimal training methods in surgical education. NCT01497782.

An Examination of Strategy Implementation During Abstract Nonlinguistic Category Learning in Aphasia.

PubMed

Vallila-Rohter, Sofia; Kiran, Swathi

2015-08-01

Our purpose was to study strategy use during nonlinguistic category learning in aphasia. Twelve control participants without aphasia and 53 participants with aphasia (PWA) completed a computerized feedback-based category learning task consisting of training and testing phases. Accuracy rates of categorization in testing phases were calculated. To evaluate strategy use, strategy analyses were conducted over training and testing phases. Participant data were compared with model data that simulated complex multi-cue, single feature, and random pattern strategies. Learning success and strategy use were evaluated within the context of standardized cognitive-linguistic assessments. Categorization accuracy was higher among control participants than among PWA. The majority of control participants implemented suboptimal or optimal multi-cue and single-feature strategies by testing phases of the experiment. In contrast, a large subgroup of PWA implemented random patterns, or no strategy, during both training and testing phases of the experiment. Person-to-person variability arises not only in category learning ability but also in the strategies implemented to complete category learning tasks. PWA less frequently developed effective strategies during category learning tasks than control participants. Certain PWA may have impairments of strategy development or feedback processing not captured by language and currently probed cognitive abilities.

Human voluntary activity integration in the control of a standing-up rehabilitation robot: a simulation study.

PubMed

Kamnik, Roman; Bajd, Tadej

2007-11-01

The paper presents a novel control approach for the robot-assisted motion augmentation of disabled subjects during the standing-up manoeuvre. The main goal of the proposal is to integrate the voluntary activity of a person in the control scheme of the rehabilitation robot. The algorithm determines the supportive force to be tracked by a robot force controller. The basic idea behind the calculation of supportive force is to quantify the deficit in the dynamic equilibrium of the trunk. The proposed algorithm was implemented as a Kalman filter procedure and evaluated in a simulation environment. The simulation results proved the adequate and robust performance of "patient-driven" robot-assisted standing-up training. In addition, the possibility of varying the training conditions with different degrees of the subject's initiative is demonstrated.

Simulation Technologies for C2IS Development & Training

DTIC Science & Technology

2008-02-01

break down complex goals or meta -reasoning events that the agent uses to decide which plans to implement. They are integral to the ongoing...controlled through various programming means, which may include the posting of a PlanChoice event. JACK agents are fully capable of meta -level...China [6] Jaillet, Christophe; Krajecki, Michael; and Fugere, Dr. Benoit Jean (2002). ParaZJeZisation en memoire partagee d’un moteur de simulation du

Tensor-Train Split-Operator Fourier Transform (TT-SOFT) Method: Multidimensional Nonadiabatic Quantum Dynamics.

PubMed

Greene, Samuel M; Batista, Victor S

2017-09-12

We introduce the "tensor-train split-operator Fourier transform" (TT-SOFT) method for simulations of multidimensional nonadiabatic quantum dynamics. TT-SOFT is essentially the grid-based SOFT method implemented in dynamically adaptive tensor-train representations. In the same spirit of all matrix product states, the tensor-train format enables the representation, propagation, and computation of observables of multidimensional wave functions in terms of the grid-based wavepacket tensor components, bypassing the need of actually computing the wave function in its full-rank tensor product grid space. We demonstrate the accuracy and efficiency of the TT-SOFT method as applied to propagation of 24-dimensional wave packets, describing the S 1 /S 2 interconversion dynamics of pyrazine after UV photoexcitation to the S 2 state. Our results show that the TT-SOFT method is a powerful computational approach for simulations of quantum dynamics of polyatomic systems since it avoids the exponential scaling problem of full-rank grid-based representations.

Improving question asking in high-functioning adolescents with autism spectrum disorders: effectiveness of small-group training.

PubMed

Palmen, Annemiek; Didden, Robert; Arts, Marieke

2008-01-01

Small-group training consisting of feedback and self-management was effective in improving question-asking skills during tutorial conversations in nine high-functioning adolescents with autism spectrum disorder. Training was implemented in a therapy room and lasted 6 weeks. Sessions were conducted once a week and lasted about an hour. Experimenters collected data during tutorial conversations in a natural setting. Training of question-asking skills consisted of verbal feedback and role-play during short simulated conversations and a table game. A self-management strategy and common stimuli (e.g., flowchart) were included to promote generalization. Mean percentage of correct questions during tutorial conversations improved significantly after training. Response efficiency also increased. Participants and personal coaches evaluated the training as effective and acceptable.

Systematic review on mentoring and simulation in laparoscopic colorectal surgery.

PubMed

Miskovic, Danilo; Wyles, Susannah M; Ni, Melody; Darzi, Ara W; Hanna, George B

2010-12-01

To identify and evaluate the influence of mentoring and simulated training in laparoscopic colorectal surgery (LCS) and define the key components for learning advanced technical skills. Laparoscopic colorectal surgery is a complex procedure, often being self-taught by senior surgeons. Educational issues such as inadequate training facilities or a shortfall of training fellowships may result in a slow uptake of LCS. The effectiveness of mentored and simulated training, however, remains unclear. We conducted a systematic search, using Ovid databases. Four study categories were identified: mentored versus nonmentored cases, training case selection, simulation, and assessment. We performed a meta-analysis and a mixed model regression on the difference of the main outcome measures (conversion rates, morbidity, and mortality) for mentored trainees and expert surgeons. We also compared conversion rates of mentored and nonmentored. Meta-analysis of risk factors for conversion was performed using published and unpublished data sets requested from various investigators. For studies on simulation, we compared scores of surveys on the perception of different training courses. Thirty-seven studies were included. Pooled weighted outcomes of mentored cases (n = 751) showed a lower conversion rate (13.3% vs 20.5%, P = 0.0332) compared with nonmentored cases (n = 695). Compared to expert case series (n = 5313), there was no difference in conversion (P = 0.2835), anastomotic leak (P = 0.8342), or mortality (P = 0.5680). A meta-analysis of training case selection data (n = 4444) revealed male sex (P < 0.0001), previous abdominal surgery (P = 0.0200), a BMI greater than 30 (P = 0.0050), an ASA of less than 2 (P < 0.0001), colorectal cancer (P < 0.0001) and intra-abdominal fistula (P < 0.0001), but not older than 64 years (P = 0.4800), to significantly increase conversion risk. Participants on cadaveric courses were highly satisfied with the teaching value yet trainees on an animal course gave less positive feedback. Structured assessment for LCS has been partially implemented. This review and meta-analysis supports evidence that trainees can obtain similar clinical results like expert surgeons in laparoscopic colorectal surgery if supervised by an experienced trainer. Cadaveric models currently provide the best value for training in a simulated environment. There remains a need for further research into technical skills assessment and the educational value of simulated training.

Status of Microsurgical Simulation Training in Plastic Surgery: A Survey of United States Program Directors.

PubMed

Al-Bustani, Saif; Halvorson, Eric G

2016-06-01

Various simulation models for microsurgery have been developed to overcome the limitations of Halstedian training on real patients. We wanted to assess the status of microsurgery simulation in plastic surgery residency programs in the United States. Data were analyzed from responses to a survey sent to all plastic surgery program directors in the United States, asking for type of simulation, quality of facilities, utilization by trainees, evaluation of trainee sessions, and perception of the relevance of simulation. The survey response rate was 50%. Of all programs, 69% provide microsurgical simulation and 75% of these have a laboratory with microscope and 52% provide live animal models. Half share facilities with other departments. The quality of facilities is rated as good or great in 89%. Trainee utilization is once every 3 to 6 months in 82% of programs. Only in 11% is utilization monthly. Formal evaluation of simulation sessions is provided by 41% of programs. All program directors agree simulation is relevant to competence in microsurgery, 60% agree simulation should be mandatory, and 43% require trainees to complete a formal microsurgery course prior to live surgery. There seems to be consensus that microsurgical simulation improves competence, and the majority of program directors agree it should be mandatory. Developing and implementing standardized simulation modules and assessment tools for trainees across the nation as part of a comprehensive competency-based training program for microsurgery is an important patient safety initiative that should be considered. Organizing with other departments to share facilities may improve their quality and hence utilization.

Team training in obstetric and neonatal emergencies using highly realistic simulation in Mexico: impact on process indicators.

PubMed

Walker, Dilys; Cohen, Susanna; Fritz, Jimena; Olvera, Marisela; Lamadrid-Figueroa, Hector; Cowan, Jessica Greenberg; Hernandez, Dolores Gonzalez; Dettinger, Julia C; Fahey, Jenifer O

2014-11-20

Ineffective management of obstetric emergencies contributes significantly to maternal and neonatal morbidity and mortality in Mexico. PRONTO (Programa de Rescate Obstétrico y Neonatal: Tratamiento Óptimo y Oportuno) is a highly-realistic, low-tech simulation-based obstetric and neonatal emergency training program. A pair-matched hospital-based controlled implementation trial was undertaken in three states in Mexico, with pre/post measurement of process indicators at intervention hospitals. This report assesses the impact of PRONTO simulation training on process indicators from the pre/post study design for process indicators. Data was collected in twelve intervention facilities on process indicators, including pre/post changes in knowledge and self-efficacy of obstetric emergencies and neonatal resuscitation, achievement of strategic planning goals established during training and changes in teamwork scores. Authors performed a longitudinal fixed-effects linear regression model to estimate changes in knowledge and self-efficacy and logistic regression to assess goal achievement. A total of 450 professionals in interprofessional teams were trained. Significant increases in knowledge and self-efficacy were noted for both physicians and nurses (p <0.001- 0.009) in all domains. Teamwork scores improved and were maintained over a three month period. A mean of 58.8% strategic planning goals per team in each hospital were achieved. There was no association between high goal achievement and knowledge, self-efficacy, proportion of doctors or nurses in training, state, or teamwork score. These results suggest that PRONTO's highly realistic, locally appropriate simulation and team training in maternal and neonatal emergency care may be a promising avenue for optimizing emergency response and improving quality of facility-based obstetric and neonatal care in resource-limited settings. NCT01477554.

Safer@home-Simulation and training: the study protocol of a qualitative action research design.

PubMed

Wiig, Siri; Guise, Veslemøy; Anderson, Janet; Storm, Marianne; Lunde Husebø, Anne Marie; Testad, Ingelin; Søyland, Elsa; Moltu, Kirsti L

2014-07-29

While it is predicted that telecare and other information and communication technology (ICT)-assisted services will have an increasingly important role in future healthcare services, their implementation in practice is complex. For implementation of telecare to be successful and ensure quality of care, sufficient training for staff (healthcare professionals) and service users (patients) is fundamental. Telecare training has been found to have positive effects on attitudes to, sustained use of, and outcomes associated with telecare. However, the potential contribution of training in the adoption, quality and safety of telecare services is an under-investigated research field. The overall aim of this study is to develop and evaluate simulation-based telecare training programmes to aid the use of videophone technology in elderly home care. Research-based training programmes will be designed for healthcare professionals, service users and next of kin, and the study will explore the impact of training on adoption, quality and safety of new telecare services. The study has a qualitative action research design. The research will be undertaken in close collaboration with a multidisciplinary team consisting of researchers and managers and clinical representatives from healthcare services in two Norwegian municipalities, alongside experts in clinical education and simulation, as well as service user (patient) representatives. The qualitative methods used involve focus group interviews, semistructured interviews, observation and document analysis. To ensure trustworthiness in the data analysis, we will apply member checks and analyst triangulation; in addition to providing contextual and sample description to allow for evaluation of transferability of our results to other contexts and groups. The study is approved by the Norwegian Social Science Data Services. The study is based on voluntary participation and informed written consent. Informants can withdraw at any point in time. The results will be disseminated at research conferences, peer review journals, one PhD thesis and through public presentations to people outside the scientific community. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

A fast implementation of MPC-based motion cueing algorithms for mid-size road vehicle motion simulators

NASA Astrophysics Data System (ADS)

Bruschetta, M.; Maran, F.; Beghi, A.

2017-06-01

The use of dynamic driving simulators is constantly increasing in the automotive community, with applications ranging from vehicle development to rehab and driver training. The effectiveness of such devices is related to their capabilities of well reproducing the driving sensations, hence it is crucial that the motion control strategies generate both realistic and feasible inputs to the platform. Such strategies are called motion cueing algorithms (MCAs). In recent years several MCAs based on model predictive control (MPC) techniques have been proposed. The main drawback associated with the use of MPC is its computational burden, that may limit their application to high performance dynamic simulators. In the paper, a fast, real-time implementation of an MPC-based MCA for 9 DOF, high performance platform is proposed. Effectiveness of the approach in managing the available working area is illustrated by presenting experimental results from an implementation on a real device with a 200 Hz control frequency.

Airline Crew Training

NASA Technical Reports Server (NTRS)

1989-01-01

The discovery that human error has caused many more airline crashes than mechanical malfunctions led to an increased emphasis on teamwork and coordination in airline flight training programs. Human factors research at Ames Research Center has produced two crew training programs directed toward more effective operations. Cockpit Resource Management (CRM) defines areas like decision making, workload distribution, communication skills, etc. as essential in addressing human error problems. In 1979, a workshop led to the implementation of the CRM program by United Airlines, and later other airlines. In Line Oriented Flight Training (LOFT), crews fly missions in realistic simulators while instructors induce emergency situations requiring crew coordination. This is followed by a self critique. Ames Research Center continues its involvement with these programs.

Simulation Based Training Improves Airway Management for Helicopter EMS Teams

NASA Technical Reports Server (NTRS)

Dhindsa, Harinder S.; Reid, Renee; Murray, David; Lovelady, James; Powell, Katie; Sayles, Jeff; Stevenson, Christopher; Baker, Kathy; Solada, Brian; Carroll, Scott;

International collaborative faculty development program on simulation-based healthcare education: a report on its successes and challenges.

PubMed

Chung, Hyun Soo; Issenberg, S Barry; Phrampus, Paul; Miller, Geoff; Je, Sang Mo; Lim, Tae Ho; Kim, Young Min

2012-12-01

Countries that are less experienced with simulation-based healthcare education (SBHE) often import Western programs to initiate their efforts to deliver effective simulation training. Acknowledging cultural differences, we sought to determine whether faculty development program on SBHE in the United States could be transported successfully to train faculty members in Korea. An international, collaborative, multi-professional program from a pre-existing Western model was adapted. The process focused on prioritization of curricular elements based on local needs, translation of course materials, and delivery of the program in small group facilitation exercises. Three types of evaluation data were collected: participants' simulation experience; participants' ratings of the course; and participant's self-assessment of the impact of the course on their knowledge, skills, and attitudes (KSA) toward simulation teaching. Thirty faculty teachers participated in the course. Eighty percent of the participants answered that they spent less than 25% of their time as simulation instructors. Time spent on planning, scenario development, delivering training, research, and administrative work ranged from 10% to 30%. Twenty-eight of 30 participants agreed or strongly agreed that the course was excellent and relevant to their needs. The participants' assessment of the impact of the course on their KSA toward simulation teaching improved significantly. Although there were many challenges to overcome, a systematic approach in the adaptation of a Western simulation faculty development course model was successfully implemented in Korea, and the program improves self-confidence and learning in participants.

New perspectives in face correlation: discrimination enhancement in face recognition based on iterative algorithm

NASA Astrophysics Data System (ADS)

Wang, Q.; Alfalou, A.; Brosseau, C.

2016-04-01

Here, we report a brief review on the recent developments of correlation algorithms. Several implementation schemes and specific applications proposed in recent years are also given to illustrate powerful applications of these methods. Following a discussion and comparison of the implementation of these schemes, we believe that all-numerical implementation is the most practical choice for application of the correlation method because the advantages of optical processing cannot compensate the technical and/or financial cost needed for an optical implementation platform. We also present a simple iterative algorithm to optimize the training images of composite correlation filters. By making use of three or four iterations, the peak-to-correlation energy (PCE) value of correlation plane can be significantly enhanced. A simulation test using the Pointing Head Pose Image Database (PHPID) illustrates the effectiveness of this statement. Our method can be applied in many composite filters based on linear composition of training images as an optimization means.

Care initiation area yields dramatic results.

PubMed

2009-03-01

The ED at Gaston Memorial Hospital in Gastonia, NC, has achieved dramatic results in key department metrics with a Care Initiation Area (CIA) and a physician in triage. Here's how the ED arrived at this winning solution: Leadership was trained in and implemented the Kaizen method, which eliminates redundant or inefficient process steps. Simulation software helped determine additional space needed by analyzing arrival patterns and other key data. After only two days of meetings, new ideas were implemented and tested.

General Aviation Pilot Advisory and Training System (GAPATS)

NASA Technical Reports Server (NTRS)

Painter, John; Ward, Donald T.; Kelly, Wallace; Crump, John W.; Phillips, Ron; Trang, Jeff; Lee, Kris; Branham, Paul A.; Krishnamurthy, Karthik; Alcorn, William P., Jr.;

Construction of a Urologic Robotic Surgery Training Curriculum: How Many Simulator Sessions Are Required for Residents to Achieve Proficiency?

PubMed

Wiener, Scott; Haddock, Peter; Shichman, Steven; Dorin, Ryan

2015-11-01

To define the time needed by urology residents to attain proficiency in computer-aided robotic surgery to aid in the refinement of a robotic surgery simulation curriculum. We undertook a retrospective review of robotic skills training data acquired during January 2012 to December 2014 from junior (postgraduate year [PGY] 2-3) and senior (PGY4-5) urology residents using the da Vinci Skills Simulator. We determined the number of training sessions attended and the level of proficiency achieved by junior and senior residents in attempting 11 basic or 6 advanced tasks, respectively. Junior residents successfully completed 9.9 ± 1.8 tasks, with 62.5% completing all 11 basic tasks. The maximal cumulative success rate of junior residents completing basic tasks was 89.8%, which was achieved within 7.0 ± 1.5 hours of training. Of senior residents, 75% successfully completed all six advanced tasks. Senior residents attended 6.3 ± 3.5 hours of training during which 5.1 ± 1.6 tasks were completed. The maximal cumulative success rate of senior residents completing advanced tasks was 85.4%. When designing and implementing an effective robotic surgical training curriculum, an allocation of 10 hours of training may be optimal to allow junior and senior residents to achieve an acceptable level of surgical proficiency in basic and advanced robotic surgical skills, respectively. These data help guide the design and scheduling of a residents training curriculum within the time constraints of a resident's workload.

Teaching Tip: Development of Veterinary Anesthesia Simulations for Pre-Clinical Training: Design, Implementation, and Evaluation Based on Student Perspectives.

PubMed

Jones, Jana L; Rinehart, Jim; Spiegel, Jacqueline Jordan; Englar, Ryane E; Sidaway, Brian K; Rowles, Joie

2018-01-01

Anesthesia simulations have been used in pre-clinical medical training for decades to help learners gain confidence and expertise in an operating room environment without danger to a live patient. The authors describe a veterinary anesthesia simulation environment (VASE) with anesthesia scenarios developed to provide a re-creation of a veterinarian's task environment while performing anesthesia. The VASE uses advanced computer technology with simulator inputs provided from standard monitoring equipment in common use during veterinary anesthesia and a commercial canine training mannequin that allows intubation, ventilation, and venous access. The simulation outputs are determined by a script that outlines routine anesthesia scenarios and describes the consequences of students' hands-on actions and interventions during preestablished anesthetic tasks and critical incidents. Patients' monitored physiologic parameters may be changed according to predetermined learner events and students' interventions to provide immediate learner feedback and clinical realism. A total of 96 students from the pre-clinical anesthesia course participated in the simulations and the pre- and post-simulation surveys evaluating students' perspectives. Results of the surveys and comparisons of overall categorical cumulative responses in the pre- and post-simulation surveys indicated improvement in learners' perceived preparedness and confidence as a result of the simulated anesthesia experience, with significant improvement in the strongly agree, moderately agree, and agree categories (p<.05 at a 95% CI). These results suggest that anesthesia simulations in the VASE may complement traditional teaching methods through experiential learning and may help foster classroom-to-clinic transference of knowledge and skills without harm to an animal.

A Hardware-in-the-Loop Simulation Platform for the Verification and Validation of Safety Control Systems

NASA Astrophysics Data System (ADS)

Rankin, Drew J.; Jiang, Jin

2011-04-01

Verification and validation (V&V) of safety control system quality and performance is required prior to installing control system hardware within nuclear power plants (NPPs). Thus, the objective of the hardware-in-the-loop (HIL) platform introduced in this paper is to verify the functionality of these safety control systems. The developed platform provides a flexible simulated testing environment which enables synchronized coupling between the real and simulated world. Within the platform, National Instruments (NI) data acquisition (DAQ) hardware provides an interface between a programmable electronic system under test (SUT) and a simulation computer. Further, NI LabVIEW resides on this remote DAQ workstation for signal conversion and routing between Ethernet and standard industrial signals as well as for user interface. The platform is applied to the testing of a simplified implementation of Canadian Deuterium Uranium (CANDU) shutdown system no. 1 (SDS1) which monitors only the steam generator level of the simulated NPP. CANDU NPP simulation is performed on a Darlington NPP desktop training simulator provided by Ontario Power Generation (OPG). Simplified SDS1 logic is implemented on an Invensys Tricon v9 programmable logic controller (PLC) to test the performance of both the safety controller and the implemented logic. Prior to HIL simulation, platform availability of over 95% is achieved for the configuration used during the V&V of the PLC. Comparison of HIL simulation results to benchmark simulations shows good operational performance of the PLC following a postulated initiating event (PIE).

Towards pattern generation and chaotic series prediction with photonic reservoir computers

NASA Astrophysics Data System (ADS)

Antonik, Piotr; Hermans, Michiel; Duport, François; Haelterman, Marc; Massar, Serge

2016-03-01

Reservoir Computing is a bio-inspired computing paradigm for processing time dependent signals that is particularly well suited for analog implementations. Our team has demonstrated several photonic reservoir computers with performance comparable to digital algorithms on a series of benchmark tasks such as channel equalisation and speech recognition. Recently, we showed that our opto-electronic reservoir computer could be trained online with a simple gradient descent algorithm programmed on an FPGA chip. This setup makes it in principle possible to feed the output signal back into the reservoir, and thus highly enrich the dynamics of the system. This will allow to tackle complex prediction tasks in hardware, such as pattern generation and chaotic and financial series prediction, which have so far only been studied in digital implementations. Here we report simulation results of our opto-electronic setup with an FPGA chip and output feedback applied to pattern generation and Mackey-Glass chaotic series prediction. The simulations take into account the major aspects of our experimental setup. We find that pattern generation can be easily implemented on the current setup with very good results. The Mackey-Glass series prediction task is more complex and requires a large reservoir and more elaborate training algorithm. With these adjustments promising result are obtained, and we now know what improvements are needed to match previously reported numerical results. These simulation results will serve as basis of comparison for experiments we will carry out in the coming months.

Ab initio multiple cloning simulations of pyrrole photodissociation: TKER spectra and velocity map imaging

DOE PAGES

Makhov, Dmitry V.; Saita, Kenichiro; Martinez, Todd J.; ...

2014-12-11

In this study, we report a detailed computational simulation of the photodissociation of pyrrole using the ab initio Multiple Cloning (AIMC) method implemented within MOLPRO. The efficiency of the AIMC implementation, employing train basis sets, linear approximation for matrix elements, and Ehrenfest configuration cloning, allows us to accumulate significant statistics. We calculate and analyze the total kinetic energy release (TKER) spectrum and Velocity Map Imaging (VMI) of pyrrole and compare the results directly with experimental measurements. Both the TKER spectrum and the structure of the velocity map image (VMI) are well reproduced. Previously, it has been assumed that the isotropicmore » component of the VMI arises from long time statistical dissociation. Instead, our simulations suggest that ultrafast dynamics contributes significantly to both low and high energy portions of the TKER spectrum.« less

Ab initio multiple cloning simulations of pyrrole photodissociation: TKER spectra and velocity map imaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Makhov, Dmitry V.; Saita, Kenichiro; Martinez, Todd J.

In this study, we report a detailed computational simulation of the photodissociation of pyrrole using the ab initio Multiple Cloning (AIMC) method implemented within MOLPRO. The efficiency of the AIMC implementation, employing train basis sets, linear approximation for matrix elements, and Ehrenfest configuration cloning, allows us to accumulate significant statistics. We calculate and analyze the total kinetic energy release (TKER) spectrum and Velocity Map Imaging (VMI) of pyrrole and compare the results directly with experimental measurements. Both the TKER spectrum and the structure of the velocity map image (VMI) are well reproduced. Previously, it has been assumed that the isotropicmore » component of the VMI arises from long time statistical dissociation. Instead, our simulations suggest that ultrafast dynamics contributes significantly to both low and high energy portions of the TKER spectrum.« less

Comprehensive simulation-enhanced training curriculum for an advanced minimally invasive procedure: a randomized controlled trial.

PubMed

Zevin, Boris; Dedy, Nicolas J; Bonrath, Esther M; Grantcharov, Teodor P

2017-05-01

There is no comprehensive simulation-enhanced training curriculum to address cognitive, psychomotor, and nontechnical skills for an advanced minimally invasive procedure. 1) To develop and provide evidence of validity for a comprehensive simulation-enhanced training (SET) curriculum for an advanced minimally invasive procedure; (2) to demonstrate transfer of acquired psychomotor skills from a simulation laboratory to live porcine model; and (3) to compare training outcomes of SET curriculum group and chief resident group. University. This prospective single-blinded, randomized, controlled trial allocated 20 intermediate-level surgery residents to receive either conventional training (control) or SET curriculum training (intervention). The SET curriculum consisted of cognitive, psychomotor, and nontechnical training modules. Psychomotor skills in a live anesthetized porcine model in the OR was the primary outcome. Knowledge of advanced minimally invasive and bariatric surgery and nontechnical skills in a simulated OR crisis scenario were the secondary outcomes. Residents in the SET curriculum group went on to perform a laparoscopic jejunojejunostomy in the OR. Cognitive, psychomotor, and nontechnical skills of SET curriculum group were also compared to a group of 12 chief surgery residents. SET curriculum group demonstrated superior psychomotor skills in a live porcine model (56 [47-62] versus 44 [38-53], P<.05) and superior nontechnical skills (41 [38-45] versus 31 [24-40], P<.01) compared with conventional training group. SET curriculum group and conventional training group demonstrated equivalent knowledge (14 [12-15] versus 13 [11-15], P = 0.47). SET curriculum group demonstrated equivalent psychomotor skills in the live porcine model and in the OR in a human patient (56 [47-62] versus 63 [61-68]; P = .21). SET curriculum group demonstrated inferior knowledge (13 [11-15] versus 16 [14-16]; P<.05), equivalent psychomotor skill (63 [61-68] versus 68 [62-74]; P = .50), and superior nontechnical skills (41 [38-45] versus 34 [27-35], P<.01) compared with chief resident group. Completion of the SET curriculum resulted in superior training outcomes, compared with conventional surgery training. Implementation of the SET curriculum can standardize training for an advanced minimally invasive procedure and can ensure that comprehensive proficiency milestones are met before exposure to patient care. Copyright © 2017 American Society for Bariatric Surgery. Published by Elsevier Inc. All rights reserved.

PRANAS: A New Platform for Retinal Analysis and Simulation.

PubMed

Cessac, Bruno; Kornprobst, Pierre; Kraria, Selim; Nasser, Hassan; Pamplona, Daniela; Portelli, Geoffrey; Viéville, Thierry

2017-01-01

The retina encodes visual scenes by trains of action potentials that are sent to the brain via the optic nerve. In this paper, we describe a new free access user-end software allowing to better understand this coding. It is called PRANAS (https://pranas.inria.fr), standing for Platform for Retinal ANalysis And Simulation. PRANAS targets neuroscientists and modelers by providing a unique set of retina-related tools. PRANAS integrates a retina simulator allowing large scale simulations while keeping a strong biological plausibility and a toolbox for the analysis of spike train population statistics. The statistical method (entropy maximization under constraints) takes into account both spatial and temporal correlations as constraints, allowing to analyze the effects of memory on statistics. PRANAS also integrates a tool computing and representing in 3D (time-space) receptive fields. All these tools are accessible through a friendly graphical user interface. The most CPU-costly of them have been implemented to run in parallel.

A Data Management System for International Space Station Simulation Tools

NASA Technical Reports Server (NTRS)

Betts, Bradley J.; DelMundo, Rommel; Elcott, Sharif; McIntosh, Dawn; Niehaus, Brian; Papasin, Richard; Mah, Robert W.; Clancy, Daniel (Technical Monitor)

2002-01-01

Groups associated with the design, operational, and training aspects of the International Space Station make extensive use of modeling and simulation tools. Users of these tools often need to access and manipulate large quantities of data associated with the station, ranging from design documents to wiring diagrams. Retrieving and manipulating this data directly within the simulation and modeling environment can provide substantial benefit to users. An approach for providing these kinds of data management services, including a database schema and class structure, is presented. Implementation details are also provided as a data management system is integrated into the Intelligent Virtual Station, a modeling and simulation tool developed by the NASA Ames Smart Systems Research Laboratory. One use of the Intelligent Virtual Station is generating station-related training procedures in a virtual environment, The data management component allows users to quickly and easily retrieve information related to objects on the station, enhancing their ability to generate accurate procedures. Users can associate new information with objects and have that information stored in a database.

Proficiency-based cervical cancer brachytherapy training.

PubMed

Zhao, Sherry; Francis, Louise; Todor, Dorin; Fields, Emma C

2018-04-25

Although brachytherapy increases the local control rate for cervical cancer, there has been a progressive decline in its use. Furthermore, the training among residency programs for gynecologic brachytherapy varies considerably, with some residents receiving little to no training. This trend is especially concerning given the association between poor applicator placement and decline in local control. Considering the success of proficiency-based training in other procedural specialties, we developed and implemented a proficiency-based cervical brachytherapy training curriculum for our residents. Each resident placed tandem and ovoid applicators with attending guidance and again alone 2 weeks later using a pelvic model that was modified to allow for cervical brachytherapy. Plain films were taken of the pelvic model, and applicator placement quality was evaluated. Other evaluated metrics included retention of key procedural details, the time taken for each procedure and presession and postsession surveys to assess confidence. During the initial session, residents on average met 4.5 of 5 placement criteria, which improved to 5 the second session. On average, residents were able to remember 7.6 of the 8 key procedural steps. Execution time decreased by an average of 10.5%. Resident confidence with the procedure improved dramatically, from 2.6 to 4.6 of 5. Residents who had previously never performed a tandem and ovoid procedure showed greater improvements in these criteria than those who had. All residents strongly agreed that the training was helpful and wanted to participate again the following year. Residents participating in this simulation training had measurable improvements in the time to perform the procedure, applicator placement quality, and confidence. This curriculum is easy to implement and is of great value for training residents, and would be particularly beneficial in programs with low volume of cervical brachytherapy cases. Simulation programs could also be created for other technically challenging radiation oncology procedures. Copyright © 2018 American Brachytherapy Society. Published by Elsevier Inc. All rights reserved.

Applying FastSLAM to Articulated Rovers

NASA Astrophysics Data System (ADS)

Hewitt, Robert Alexander

This thesis presents the navigation algorithms designed for use on Kapvik, a 30 kg planetary micro-rover built for the Canadian Space Agency; the simulations used to test the algorithm; and novel techniques for terrain classification using Kapvik's LIDAR (Light Detection And Ranging) sensor. Kapvik implements a six-wheeled, skid-steered, rocker-bogie mobility system. This warrants a more complicated kinematic model for navigation than a typical 4-wheel differential drive system. The design of a 3D navigation algorithm is presented that includes nonlinear Kalman filtering and Simultaneous Localization and Mapping (SLAM). A neural network for terrain classification is used to improve navigation performance. Simulation is used to train the neural network and validate the navigation algorithms. Real world tests of the terrain classification algorithm validate the use of simulation for training and the improvement to SLAM through the reduction of extraneous LIDAR measurements in each scan.

MiRTE: Mixed Reality Triage and Evacuation game for Mass Casualty information systems design, testing and training.

PubMed

Yu, Xunyi; Ganz, Aura

2011-01-01

In this paper we introduce a Mixed Reality Triage and Evacuation game, MiRTE, that is used in the development, testing and training of Mass Casualty Incident (MCI) information systems for first responders. Using the Source game engine from Valve software, MiRTE creates immersive virtual environments to simulate various incident scenarios, and enables interactions between multiple players/first responders. What distinguishes it from a pure computer simulation game is that it can interface with external mass casualty incident management systems, such as DIORAMA. The game will enable system developers to specify technical requirements of underlying technology, and test different alternatives of design. After the information system hardware and software are completed, the game can simulate various algorithms such as localization technologies, and interface with an actual user interface on PCs and Smartphones. We implemented and tested the game with the DIORAMA system.

Toward a definition of teamwork in emergency medicine.

PubMed

Fernandez, Rosemarie; Kozlowski, Steve W J; Shapiro, Marc J; Salas, Eduardo

2008-11-01

The patient safety literature from the past decade emphasizes the importance of teamwork skills and human factors in preventing medical errors. Simulation has been used within aviation, the military, and now health care domains to effectively teach and assess teamwork skills. However, attempts to expand and generalize research and training principles have been limited due to a lack of a well-defined, well-researched taxonomy. As part of the 2008 Academic Emergency Medicine Consensus Conference on "The Science of Simulation in Healthcare," a subset of the group expertise and group assessment breakout sections identified evidence-based recommendations for an emergency medicine (EM) team taxonomy and performance model. This material was disseminated within the morning session and was discussed both during breakout sessions and via online messaging. Below we present a well-defined, well-described taxonomy that will help guide design, implementation, and assessment of simulation-based team training programs.

Simulator Network Project Report: A tool for improvement of teaching materials and targeted resource usage in Skills Labs

PubMed Central

Damanakis, Alexander; Blaum, Wolf E.; Stosch, Christoph; Lauener, Hansjörg; Richter, Sabine; Schnabel, Kai P.

2013-01-01

During the last decade, medical education in the German-speaking world has been striving to become more practice-oriented. This is currently being achieved in many schools through the implementation of simulation-based instruction in Skills Labs. Simulators are thus an essential part of this type of medical training, and their acquisition and operation by a Skills Lab require a large outlay of resources. Therefore, the Practical Skills Committee of the Medical Education Society (GMA) introduced a new project, which aims to improve the flow of information between the Skills Labs and enable a transparent assessment of the simulators via an online database (the Simulator Network). PMID:23467581

Management simulations for Lean healthcare: exploiting the potentials of role-playing.

PubMed

Barnabè, Federico; Giorgino, Maria Cleofe; Guercini, Jacopo; Bianciardi, Caterina; Mezzatesta, Vincenzo

2018-04-09

Purpose The purpose of this paper is to investigate the potentials of role-playing (RP) both in training healthcare (HC) professionals to implement tools and improvement actions based on Lean principles, and in supporting group discussion and the sharing of different competencies for the development of Lean HC. Design/methodology/approach The paper presents the case study of an RP simulation called LEAN HEALTHCARE LAB, which is used to train HC professionals at Siena University Hospital. The paper reports and discusses the results of a specific two-day simulation session and of a questionnaire that was distributed to gather feedback from the participants. Findings The paper verifies the potentials of RP to be a powerful educational and training tool that is able to stimulate the HC participants to apply Lean thinking principles and share their competencies in collaborative decision-making processes. Research limitations/implications The study provides data in reference to one single simulation session, although the game has already been applied several times in different HC organizations with very similar outcomes. Moreover, a more in-depth analysis of players' perceptions and decisions could be performed using different tools in addition to the adopted questionnaire. Practical implications RP games (RPGs) are effective training and educational tools for HC professionals. They offer benefits and learning conditions which are definitely different if compared with more conventional education programs for HC professionals. Originality/value While previous studies have extensively discussed the potentialities of RPG and simulations in training programs, only a few articles have discussed the RP adoption for Lean thinking and even less to educate HC professionals on Lean principles and tools.

A cost-effectiveness analysis of self-debriefing versus instructor debriefing for simulated crises in perioperative medicine in Canada.

PubMed

Isaranuwatchai, Wanrudee; Alam, Fahad; Hoch, Jeffrey; Boet, Sylvain

2017-01-01

High-fidelity simulation training is effective for learning crisis resource management (CRM) skills, but cost is a major barrier to implementing high-fidelity simulation training into the curriculum. The aim of this study was to examine the cost-effectiveness of self-debriefing and traditional instructor debriefing in CRM training programs and to calculate the minimum willingness-to-pay (WTP) value when one debriefing type becomes more cost-effective than the other. This study used previous data from a randomized controlled trial involving 50 anesthesiology residents in Canada. Each participant managed a pretest crisis scenario. Participants who were randomized to self-debrief used the video of their pretest scenario with no instructor present during their debriefing. Participants from the control group were debriefed by a trained instructor using the video of their pretest scenario. Participants individually managed a post-test simulated crisis scenario. We compared the cost and effectiveness of self-debriefing versus instructor debriefing using net benefit regression. The cost-effectiveness estimate was reported as the incremental net benefit and the uncertainty was presented using a cost-effectiveness acceptability curve. Self-debriefing costs less than instructor debriefing. As the WTP increased, the probability that self-debriefing would be cost-effective decreased. With a WTP ≤Can$200, the self-debriefing program was cost-effective. However, when effectiveness was priced higher than cost-savings and with a WTP >Can$300, instructor debriefing was the preferred alternative. With a lower WTP (≤Can$200), self-debriefing was cost-effective in CRM simulation training when compared to instructor debriefing. This study provides evidence regarding cost-effectiveness that will inform decision-makers and clinical educators in their decision-making process, and may help to optimize resource allocation in education.

Instructor feedback versus no instructor feedback on performance in a laparoscopic virtual reality simulator: a randomized educational trial

PubMed Central

2012-01-01

Abstract Background Several studies have found a positive effect on the learning curve as well as the improvement of basic psychomotor skills in the operating room after virtual reality training. Despite this, the majority of surgical and gynecological departments encounter hurdles when implementing this form of training. This is mainly due to lack of knowledge concerning the time and human resources needed to train novice surgeons to an adequate level. The purpose of this trial is to investigate the impact of instructor feedback regarding time, repetitions and self-perception when training complex operational tasks on a virtual reality simulator. Methods/Design The study population consists of medical students on their 4th to 6th year without prior laparoscopic experience. The study is conducted in a skills laboratory at a centralized university hospital. Based on a sample size estimation 98 participants will be randomized to an intervention group or a control group. Both groups have to achieve a predefined proficiency level when conducting a laparoscopic salpingectomy using a surgical virtual reality simulator. The intervention group receives standardized instructor feedback of 10 to 12 min a maximum of three times. The control group receives no instructor feedback. Both groups receive the automated feedback generated by the virtual reality simulator. The study follows the CONSORT Statement for randomized trials. Main outcome measures are time and repetitions to reach the predefined proficiency level on the simulator. We include focus on potential sex differences, computer gaming experience and self-perception. Discussion The findings will contribute to a better understanding of optimal training methods in surgical education. Trial Registration NCT01497782 PMID:22373062

Experiential learning in nursing consultation education via clinical simulation with actors: action research.

PubMed

de Oliveira, Saionara Nunes; do Prado, Marta Lenise; Kempfer, Silvana Silveira; Martini, Jussara Gue; Caravaca-Morera, Jaime Alonso; Bernardi, Mariely Carmelina

2015-02-01

This was an action research study conducted during an undergraduate nursing course. The objective was to propose and implement experiential learning for nursing consultation education using clinical simulation with actors. The 4 steps of action research were followed: planning, action, observation and reflection. Three nursing undergraduate students participated in the study. Data were collected in May and July 2013 via participant comments and interviews and were analyzed in accordance with the operative proposal for qualitative data analysis. Planning included constructing and validating the clinical guides, selecting and training the actors, organizing and preparing the scenario and the issuing invitations to the participants. The action was carried out according to Kolb's (1984) 4 stages of learning cycles: Concrete Experience, Reflective Observation, Abstract Conceptualization and Active Experimentation. Clinical simulation involves different subjects' participation in all stages, and action research is a method that enables the clinical stimulation to be implemented. It must be guided by clear learning objectives and by a critical pedagogy that encourages critical thinking in students. Using actors and a real scenario facilitated psychological fidelity, and debriefing was the key moment of the reflective process that facilitated the integral training of students through experiential learning. Copyright © 2014 Elsevier Ltd. All rights reserved.

Building interactive virtual environments for simulated training in medicine using VRML and Java/JavaScript.

PubMed

Korocsec, D; Holobar, A; Divjak, M; Zazula, D

2005-12-01

Medicine is a difficult thing to learn. Experimenting with real patients should not be the only option; simulation deserves a special attention here. Virtual Reality Modelling Language (VRML) as a tool for building virtual objects and scenes has a good record of educational applications in medicine, especially for static and animated visualisations of body parts and organs. However, to create computer simulations resembling situations in real environments the required level of interactivity and dynamics is difficult to achieve. In the present paper we describe some approaches and techniques which we used to push the limits of the current VRML technology further toward dynamic 3D representation of virtual environments (VEs). Our demonstration is based on the implementation of a virtual baby model, whose vital signs can be controlled from an external Java application. The main contributions of this work are: (a) outline and evaluation of the three-level VRML/Java implementation of the dynamic virtual environment, (b) proposal for a modified VRML Timesensor node, which greatly improves the overall control of system performance, and (c) architecture of the prototype distributed virtual environment for training in neonatal resuscitation comprising the interactive virtual newborn, active bedside monitor for vital signs and full 3D representation of the surgery room.

Development, implementation and initial evaluation of narrative virtual patients for use in vocational mental health nurse training.

PubMed

Guise, Veslemøy; Chambers, Mary; Conradi, Emily; Kavia, Sheetal; Välimäki, Maritta

2012-08-01

Simulation techniques such as virtual patients (VPs) are valuable tools for teaching and learning a range of clinical proficiencies. Compared with other forms of simulation, however, the reported use of VPs within nursing is limited. Descriptions of simple, low cost methods for the development of VP devices could help facilitate their wider implementation and use in nursing education and training. In order to encourage broader use of VP technologies within nursing, this paper aims to expand current knowledge of VP creation by reference to the development of two virtual mental health patients produced for a multilingual e-learning course for European mental health nurses. Focusing on narrative VPs, the paper provides a brief overview of various types and potential uses of VP techniques, along with central elements of good practice in VP development. The five phase development framework used in the creation of the two VPs is presented. Processes detailed include the design and construction of case scenarios and multimedia components, in addition to initial usability and validity testing. VPs like those described here are a relatively inexpensive way of integrating virtual simulation technology into nursing education, particularly within online, blended and/or cross-cultural learning environments. Copyright © 2011 Elsevier Ltd. All rights reserved.

An Examination of Strategy Implementation During Abstract Nonlinguistic Category Learning in Aphasia

PubMed Central

Kiran, Swathi

2015-01-01

Purpose Our purpose was to study strategy use during nonlinguistic category learning in aphasia. Method Twelve control participants without aphasia and 53 participants with aphasia (PWA) completed a computerized feedback-based category learning task consisting of training and testing phases. Accuracy rates of categorization in testing phases were calculated. To evaluate strategy use, strategy analyses were conducted over training and testing phases. Participant data were compared with model data that simulated complex multi-cue, single feature, and random pattern strategies. Learning success and strategy use were evaluated within the context of standardized cognitive–linguistic assessments. Results Categorization accuracy was higher among control participants than among PWA. The majority of control participants implemented suboptimal or optimal multi-cue and single-feature strategies by testing phases of the experiment. In contrast, a large subgroup of PWA implemented random patterns, or no strategy, during both training and testing phases of the experiment. Conclusions Person-to-person variability arises not only in category learning ability but also in the strategies implemented to complete category learning tasks. PWA less frequently developed effective strategies during category learning tasks than control participants. Certain PWA may have impairments of strategy development or feedback processing not captured by language and currently probed cognitive abilities. PMID:25908438

Developing an After Action Review System for a 3D Interactive Training Simulation Using XML

DTIC Science & Technology

2004-03-01

Implementation. Addison Wesley © 1999 ISBN 0-201-32557-8 [2] H. M. Deitel and P. J. Deitel , Deitel and Associates Inc.(2001). C++ How to Program 3rd...and how can this technique help the trainer and the trainee? They both now have a common useful tool to discern what happened during the simulation...participants who acted incorrectly but rather to spot any wrong decisions or actions, and analyze why they were wrong, what the consequences were, and how

Interservice/Industry Training Systems Conference (13th) Held in Orlando, Florida on 2-5 December 1991

DTIC Science & Technology

1991-12-01

within the be able to design and implement tactile feedback, cube. These simulations range from pc-oased binaural hearing, and autosterioscopic...of the 6-per-revolution beat simulate local wind velocities near the hub. experienced by the tandem 3-blade rotor hubs of the CH46, thus minimizing the...totally -- taking inventory and main- ignored- in another. For example, the taining the security of the videotape entitled " Beating the Odds -- of the

Construct and concurrent validity of a Nintendo Wii video game made for training basic laparoscopic skills.

PubMed

Jalink, M B; Goris, J; Heineman, E; Pierie, J P E N; ten Cate Hoedemaker, H O

2014-02-01

Virtual reality (VR) laparoscopic simulators have been around for more than 10 years and have proven to be cost- and time-effective in laparoscopic skills training. However, most simulators are, in our experience, considered less interesting by residents and are often poorly accessible. Consequently, these devices are rarely used in actual training. In an effort to make a low-cost and more attractive simulator, a custom-made Nintendo Wii game was developed. This game could ultimately be used to train the same basic skills as VR laparoscopic simulators ought to. Before such a video game can be implemented into a surgical training program, it has to be validated according to international standards. The main goal of this study was to test construct and concurrent validity of the controls of a prototype of the game. In this study, the basic laparoscopic skills of experts (surgeons, urologists, and gynecologists, n = 15) were compared to those of complete novices (internists, n = 15) using the Wii Laparoscopy (construct validity). Scores were also compared to the Fundamentals of Laparoscopy (FLS) Peg Transfer test, an already established assessment method for measuring basic laparoscopic skills (concurrent validity). Results showed that experts were 111 % faster (P = 0.001) on the Wii Laparoscopy task than novices. Also, scores of the FLS Peg Transfer test and the Wii Laparoscopy showed a significant, high correlation (r = 0.812, P < 0.001). The prototype setup of the Wii Laparoscopy possesses solid construct and concurrent validity.

Learning and Treatment of Anaphylaxis by Laypeople: A Simulation Study Using Pupilar Technology

PubMed Central

Fernandez-Mendez, Felipe; Barcala-Furelos, Roberto; Padron-Cabo, Alexis; Garcia-Magan, Carlos; Moure-Gonzalez, Jose; Contreras-Jordan, Onofre; Rodriguez-Nuñez, Antonio

2017-01-01

An anaphylactic shock is a time-critical emergency situation. The decision-making during emergencies is an important responsibility but difficult to study. Eye-tracking technology allows us to identify visual patterns involved in the decision-making. The aim of this pilot study was to evaluate two training models for the recognition and treatment of anaphylaxis by laypeople, based on expert assessment and eye-tracking technology. A cross-sectional quasi-experimental simulation study was made to evaluate the identification and treatment of anaphylaxis. 50 subjects were randomly assigned to four groups: three groups watching different training videos with content supervised by sanitary personnel and one control group who received face-to-face training during paediatric practice. To evaluate the learning, a simulation scenario represented by an anaphylaxis' victim was designed. A device capturing eye movement as well as expert valuation was used to evaluate the performance. The subjects that underwent paediatric face-to-face training achieved better and faster recognition of the anaphylaxis. They also used the adrenaline injector with better precision and less mistakes, and they needed a smaller number of visual fixations to recognise the anaphylaxis and to make the decision to inject epinephrine. Analysing the different video formats, mixed results were obtained. Therefore, they should be tested to evaluate their usability before implementation. PMID:28758128

Learning and Treatment of Anaphylaxis by Laypeople: A Simulation Study Using Pupilar Technology.

PubMed

Fernandez-Mendez, Felipe; Saez-Gallego, Nieves Maria; Barcala-Furelos, Roberto; Abelairas-Gomez, Cristian; Padron-Cabo, Alexis; Perez-Ferreiros, Alexandra; Garcia-Magan, Carlos; Moure-Gonzalez, Jose; Contreras-Jordan, Onofre; Rodriguez-Nuñez, Antonio

2017-01-01

An anaphylactic shock is a time-critical emergency situation. The decision-making during emergencies is an important responsibility but difficult to study. Eye-tracking technology allows us to identify visual patterns involved in the decision-making. The aim of this pilot study was to evaluate two training models for the recognition and treatment of anaphylaxis by laypeople, based on expert assessment and eye-tracking technology. A cross-sectional quasi-experimental simulation study was made to evaluate the identification and treatment of anaphylaxis. 50 subjects were randomly assigned to four groups: three groups watching different training videos with content supervised by sanitary personnel and one control group who received face-to-face training during paediatric practice. To evaluate the learning, a simulation scenario represented by an anaphylaxis' victim was designed. A device capturing eye movement as well as expert valuation was used to evaluate the performance. The subjects that underwent paediatric face-to-face training achieved better and faster recognition of the anaphylaxis. They also used the adrenaline injector with better precision and less mistakes, and they needed a smaller number of visual fixations to recognise the anaphylaxis and to make the decision to inject epinephrine. Analysing the different video formats, mixed results were obtained. Therefore, they should be tested to evaluate their usability before implementation.

[Human-robot global Simulink modeling and analysis for an end-effector upper limb rehabilitation robot].

PubMed

Liu, Yali; Ji, Linhong

2018-02-01

Robot rehabilitation has been a primary therapy method for the urgent rehabilitation demands of paralyzed patients after a stroke. The parameters in rehabilitation training such as the range of the training, which should be adjustable according to each participant's functional ability, are the key factors influencing the effectiveness of rehabilitation therapy. Therapists design rehabilitation projects based on the semiquantitative functional assessment scales and their experience. But these therapies based on therapists' experience cannot be implemented in robot rehabilitation therapy. This paper modeled the global human-robot by Simulink in order to analyze the relationship between the parameters in robot rehabilitation therapy and the patients' movement functional abilities. We compared the shoulder and elbow angles calculated by simulation with the angles recorded by motion capture system while the healthy subjects completed the simulated action. Results showed there was a remarkable correlation between the simulation data and the experiment data, which verified the validity of the human-robot global Simulink model. Besides, the relationship between the circle radius in the drawing tasks in robot rehabilitation training and the active movement degrees of shoulder as well as elbow was also matched by a linear, which also had a remarkable fitting coefficient. The matched linear can be a quantitative reference for the robot rehabilitation training parameters.

Implementation, reliability, and feasibility test of an Open-Source PACS.

PubMed

Valeri, Gianluca; Zuccaccia, Matteo; Badaloni, Andrea; Ciriaci, Damiano; La Riccia, Luigi; Mazzoni, Giovanni; Maggi, Stefania; Giovagnoni, Andrea

2015-12-01

To implement a hardware and software system able to perform the major functions of an Open-Source PACS, and to analyze it in a simulated real-world environment. A small home network was implemented, and the Open-Source operating system Ubuntu 11.10 was installed in a laptop containing the Dcm4chee suite with the software devices needed. The Open-Source PACS implemented is compatible with Linux OS, Microsoft OS, and Mac OS X; furthermore, it was used with operating systems that guarantee the operation in portable devices (smartphone, tablet) Android and iOS. An OSS PACS is useful for making tutorials and workshops on post-processing techniques for educational and training purposes.

Establishing High-Quality Prostate Brachytherapy Using a Phantom Simulator Training Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thaker, Nikhil G.; Kudchadker, Rajat J.; Swanson, David A.

2014-11-01

Purpose: To design and implement a unique training program that uses a phantom-based simulator to teach the process of prostate brachytherapy (PB) quality assurance and improve the quality of education. Methods and Materials: Trainees in our simulator program were practicing radiation oncologists, radiation oncology residents, and fellows of the American Brachytherapy Society. The program emphasized 6 core areas of quality assurance: patient selection, simulation, treatment planning, implant technique, treatment evaluation, and outcome assessment. Using the Iodine 125 ({sup 125}I) preoperative treatment planning technique, trainees implanted their ultrasound phantoms with dummy seeds (ie, seeds with no activity). Pre- and postimplant dosimetric parametersmore » were compared and correlated using regression analysis. Results: Thirty-one trainees successfully completed the simulator program during the period under study. The mean phantom prostate size, number of seeds used, and total activity were generally consistent between trainees. All trainees met the V100 >95% objective both before and after implantation. Regardless of the initial volume of the prostate phantom, trainees' ability to cover the target volume with at least 100% of the dose (V100) was not compromised (R=0.99 pre- and postimplant). However, the V150 had lower concordance (R=0.37) and may better reflect heterogeneity control of the implant process. Conclusions: Analysis of implants from this phantom-based simulator shows a high degree of consistency between trainees and uniformly high-quality implants with respect to parameters used in clinical practice. This training program provides a valuable educational opportunity that improves the quality of PB training and likely accelerates the learning curve inherent in PB. Prostate phantom implantation can be a valuable first step in the acquisition of the required skills to safely perform PB.« less

Revitalization of clinical skills training at the University of the Western Cape.

PubMed

Jeggels, J D; Traut, A; Kwast, M

2010-06-01

Most educational institutions that offer health related qualifications make use of clinical skills laboratories. These spaces are generally used for the demonstration and assessment of clinical skills. The purpose of this paper is to share our experiences related to the revitalization of skills training by introducing the skills lab method at the School of Nursing (SoN), University of the Western Cape (UWC). To accommodate the contextual changes as a result of the restructuring of the higher education landscape in 2003, the clinical skills training programme at UWC had to be reviewed. With a dramatic increase in the student numbers and a reduction in hospital beds, the skills lab method provided students with an opportunity to develop clinical skills prior to their placement in real service settings. The design phase centred on adopting a skills training methodology that articulates with the case-based approach used by the SoN. Kolb's, experiential learning cycle provided the theoretical underpinning for the methodology. The planning phase was spent on the development of resources. Eight staff members were trained by our international higher education collaborators who also facilitated the training of clinical supervisors and simulated patients. The physical space had to be redesigned to accommodate audio visual and information technology to support the phases of the skills lab method. The implementation of the skills lab method was phased in from the first-year level. An interactive seminar held after the first year of implementation provided feedback from all the role players and was mostly positive. The results of introducing the skills lab method include: a move by students towards self-directed clinical skills development, clinical supervisors adopting the role of facilitators of learning and experiential clinical learning being based on, amongst others, the students' engagement with simulated patients. Finally, the recommendations relate to tailor-making clinical skills training by using various aspects of teaching and learning principles, i.e. case-based teaching, experiential learning and the skills lab method.

Simulated learning environment experience in nursing students for paediatric practice.

PubMed

Mendoza-Maldonado, Yessy; Barría-Pailaquilén, René Mauricio

The training of health professionals requires the acquisition of clinical skills in a safe and efficient manner, which is facilitated by a simulated learning environment (SLE). It is also an efficient alternative when there are limitations for clinical practice in certain areas. This paper shows the work undertaken in a Chilean university in implementing paediatric practice using SLE. Over eight days, the care experience of a hospitalized infant was studied applying the nursing process. The participation of a paediatrician, resident physician, nursing technician, and simulated user was included in addition to the use of a simulation mannequin and equipment. Simulation of care was integral and covered interaction with the child and family and was developed in groups of six students by a teacher. The different phases of the simulation methodology were developed from a pedagogical point of view. The possibility of implementing paediatric clinical practice in an efficient and safe way was confirmed. The experience in SLE was highly valued by the students, allowing them to develop different skills and abilities required for paediatric nursing through simulation. Copyright © 2018 Elsevier España, S.L.U. All rights reserved.

Neural network-based run-to-run controller using exposure and resist thickness adjustment

NASA Astrophysics Data System (ADS)

Geary, Shane; Barry, Ronan

2003-06-01

This paper describes the development of a run-to-run control algorithm using a feedforward neural network, trained using the backpropagation training method. The algorithm is used to predict the critical dimension of the next lot using previous lot information. It is compared to a common prediction algorithm - the exponentially weighted moving average (EWMA) and is shown to give superior prediction performance in simulations. The manufacturing implementation of the final neural network showed significantly improved process capability when compared to the case where no run-to-run control was utilised.

Virtual VMASC: A 3D Game Environment

NASA Technical Reports Server (NTRS)

Manepalli, Suchitra; Shen, Yuzhong; Garcia, Hector M.; Lawsure, Kaleen

2010-01-01

The advantages of creating interactive 3D simulations that allow viewing, exploring, and interacting with land improvements, such as buildings, in digital form are manifold and range from allowing individuals from anywhere in the world to explore those virtual land improvements online, to training military personnel in dealing with war-time environments, and to making those land improvements available in virtual worlds such as Second Life. While we haven't fully explored the true potential of such simulations, we have identified a requirement within our organization to use simulations like those to replace our front-desk personnel and allow visitors to query, naVigate, and communicate virtually with various entities within the building. We implemented the Virtual VMASC 3D simulation of the Virginia Modeling Analysis and Simulation Center (VMASC) office building to not only meet our front-desk requirement but also to evaluate the effort required in designing such a simulation and, thereby, leverage the experience we gained in future projects of this kind. This paper describes the goals we set for our implementation, the software approach taken, the modeling contribution made, and the technologies used such as XNA Game Studio, .NET framework, Autodesk software packages, and, finally, the applicability of our implementation on a variety of architectures including Xbox 360 and PC. This paper also summarizes the result of our evaluation and the lessons learned from our effort.

Limitations of subjective cognitive load measures in simulation-based procedural training.

PubMed

Naismith, Laura M; Cheung, Jeffrey J H; Ringsted, Charlotte; Cavalcanti, Rodrigo B

2015-08-01

The effective implementation of cognitive load theory (CLT) to optimise the instructional design of simulation-based training requires sensitive and reliable measures of cognitive load. This mixed-methods study assessed relationships between commonly used measures of total cognitive load and the extent to which these measures reflected participants' experiences of cognitive load in simulation-based procedural skills training. Two groups of medical residents (n = 38) completed three questionnaires after participating in simulation-based procedural skills training sessions: the Paas Cognitive Load Scale; the NASA Task Load Index (TLX), and a cognitive load component (CLC) questionnaire we developed to assess total cognitive load as the sum of intrinsic load (how complex the task is), extraneous load (how the task is presented) and germane load (how the learner processes the task for learning). We calculated Pearson's correlation coefficients to assess agreement among these instruments. Group interviews explored residents' perceptions about how the simulation sessions contributed to their total cognitive load. Interviews were audio-recorded, transcribed and subjected to qualitative content analysis. Total cognitive load scores differed significantly according to the instrument used to assess them. In particular, there was poor agreement between the Paas Scale and the TLX. Quantitative and qualitative findings supported intrinsic cognitive load as synonymous with mental effort (Paas Scale), mental demand (TLX) and task difficulty and complexity (CLC questionnaire). Additional qualitative themes relating to extraneous and germane cognitive loads were not reflected in any of the questionnaires. The Paas Scale, TLX and CLC questionnaire appear to be interchangeable as measures of intrinsic cognitive load, but not of total cognitive load. A more complete understanding of the sources of extraneous and germane cognitive loads in simulation-based training contexts is necessary to determine how best to measure and assess their effects on learning and performance outcomes. © 2015 John Wiley & Sons Ltd.

Effect of different simulated altitudes on repeat-sprint performance in team-sport athletes.

PubMed

Goods P, S R; Dawson, Brian T; Landers, Grant J; Gore, Christopher J; Peeling, Peter

2014-09-01

This study aimed to assess the impact of 3 heights of simulated altitude exposure on repeat-sprint performance in team-sport athletes. Ten trained male team-sport athletes completed 3 sets of repeated sprints (9 × 4 s) on a nonmotorized treadmill at sea level and at simulated altitudes of 2000, 3000, and 4000 m. Participants completed 4 trials in a random order over 4 wk, with mean power output (MPO), peak power output (PPO), blood lactate concentration (Bla), and oxygen saturation (SaO2) recorded after each set. Each increase in simulated altitude corresponded with a significant decrease in SaO2. Total work across all sets was highest at sea level and correspondingly lower at each successive altitude (P < .05; sea level < 2000 m < 3000 m < 4000 m). In the first set, MPO was reduced only at 4000 m, but for subsequent sets, decreases in MPO were observed at all altitudes (P < .05; 2000 m < 3000 m < 4000 m). PPO was maintained in all sets except for set 3 at 4000 m (P < .05; vs sea level and 2000 m). BLa levels were highest at 4000 m and significantly greater (P < .05) than at sea level after all sets. These results suggest that "higher may not be better," as a simulated altitude of 4000 m may potentially blunt absolute training quality. Therefore, it is recommended that a moderate simulated altitude (2000-3000 m) be employed when implementing intermittent hypoxic repeat-sprint training for team-sport athletes.

Implementation of the interdisciplinary curriculum Teaching and Assessing Communicative Competence in the fourth academic year of medical studies (CoMeD).

PubMed

Mortsiefer, Achim; Rotthoff, Thomas; Schmelzer, Regine; Immecke, J; Ortmanns, B; in der Schmitten, J; Altiner, A; Karger, André

2012-01-01

Implementation of a longitudinal curriculum for training in advanced communications skills represents an unmet need in most German medical faculties, especially in the 4rth and 5th years of medical studies. The CoMeD project (communication in medical education Düsseldorf) attempted to establish an interdisciplinary program to teach and to assess communicative competence in the 4th academic year. In this paper, we describe the development of the project and report results of its evaluation by medical students. Teaching objectives and lesson formats were developed in a multistage process. A teaching program for simulated patients (SP) was built up and continuous lecturer trainings were estabilshed. Several clinical disciplines co-operated for the purpose of integrating the communication training into the pre-existing clinical teaching curriculum. The CoMeD project was evaluated using feedback-forms after each course. Until now, six training units for especially challenging communication tasks like "dealing with aggression" or "breaking bad news" were implemented, each unit connected with a preliminary tutorial or e-learning course. An OSCE (objective structured clinical examination) with 4 stations was introduced. The students' evaluation of the six CoMeD training units showed the top or second-best rating in more than 80% of the answers. Introducing an interdisciplinary communication training and a corresponding OSCE into the 4th year medical curriculum is feasible. Embedding communication teaching in a clinical context and involvement of clinicians as lecturers seem to be important factors for ensuring practical relevance and achieving high acceptance by medical students.

Improving Resident Performance in Knee Arthroscopy: A Prospective Value Assessment of Simulators and Cadaveric Skills Laboratories.

PubMed

Camp, Christopher L; Krych, Aaron J; Stuart, Michael J; Regnier, Terry D; Mills, Karen M; Turner, Norman S

2016-02-03

Cadaveric skills laboratories and virtual reality simulators are two common methods used outside of the operating room to improve residents' performance of knee arthroscopy. We are not aware of any head-to-head comparisons of the educational values of these two methodologies. The purpose of this prospective randomized trial was to assess the efficacy of these training methods, compare their rates of improvement, and provide economic value data to programs seeking to implement such technologies. Orthopaedic surgery residents were randomized to one of three groups: control, training on cadavera (cadaver group), and training with use of a simulator (simulator group). Residents completed pretest and posttest diagnostic knee arthroscopies on cadavera that were timed and video-recorded. Between the pretest and posttest, the control group performed no arthroscopy, the cadaver group performed four hours of practice on cadavera, and the simulator group trained for four hours on a simulator. All tests were scored in a blinded, randomized fashion using the validated Arthroscopy Surgical Skill Evaluation Tool (ASSET). The mean improvement in the ASSET score and in the time to complete the procedure were compared between the pretest and posttest and among the groups. Forty-five residents (fifteen per group) completed the study. The mean difference in the ASSET score from the pretest to the posttest was -0.40 (p = 0.776) in the control group, +4.27 (p = 0.002) in the cadaver group, and +1.92 (p = 0.096) in the simulator group (p = 0.015 for the comparison among the groups). The mean difference in the test-completion time (minutes:seconds) from the pretest to the posttest was 0:07 (p = 0.902) in the control group, 3:01 (p = 0.002) in the cadaver group, and 0:28 (p = 0.708) in the simulator group (p = 0.044 for the comparison among groups). Residents in the cadaver group improved their performance at a mean of 1.1 ASSET points per hour spent training whereas those in the simulator group improved 0.5 ASSET point per hour of training. Cadaveric skills laboratories improved residents' performance of knee arthroscopy compared with that of matched controls. Residents practicing on cadaveric specimens improved twice as fast as those utilizing a high-fidelity simulator; however, based on cost estimation specific to our institution, the simulator may be more cost-effective if it is used at least 300 hours per year. Additional study of this possibility is warranted. Copyright © 2016 by The Journal of Bone and Joint Surgery, Incorporated.

Fuzzy controller training using particle swarm optimization for nonlinear system control.

PubMed

Karakuzu, Cihan

2008-04-01

This paper proposes and describes an effective utilization of particle swarm optimization (PSO) to train a Takagi-Sugeno (TS)-type fuzzy controller. Performance evaluation of the proposed fuzzy training method using the obtained simulation results is provided with two samples of highly nonlinear systems: a continuous stirred tank reactor (CSTR) and a Van der Pol (VDP) oscillator. The superiority of the proposed learning technique is that there is no need for a partial derivative with respect to the parameter for learning. This fuzzy learning technique is suitable for real-time implementation, especially if the system model is unknown and a supervised training cannot be run. In this study, all parameters of the controller are optimized with PSO in order to prove that a fuzzy controller trained by PSO exhibits a good control performance.

Training of trainers for community primary health care workers.

PubMed

Cernada, G P

1983-01-01

Training community-based health care workers in "developing" countries is essential to improving the quality of life in both rural and urban areas. Two major obstacles to such training are the tremendous social distance gap between these community workers and their more highly-educated and upper-class trainers (often medical officers) and the didactic, formal educational system. Bridging this gap demands a participant-centered, field-oriented approach which actively involves the trainee in the design, implementation and evaluation of the training program. A description of a philosophic learning approach based on self-initiated change, educational objectives related to planning, organizing, conducting and evaluating training, and specific learning methodologies utilizing participatory learning, non-formal educational techniques, field experience, continuing feedback and learner participation are reviewed. Included are: role playing, story telling, case studies, self-learning and simulation exercises, visuals, and Portapak videotape.

The criteria of optimization of training specialists for the nuclear power industry and its implementation in the educational process

NASA Astrophysics Data System (ADS)

Lavrinenko, S. V.; Polikarpov, P. I.

2017-11-01

The nuclear industry is one of the most important and high-tech spheres of human activity in Russia. The main cause of accidents in the nuclear industry is the human factor. In this connection, the need to constantly analyze the system of training of specialists and its optimization in order to improve safety at nuclear industry enterprises. To do this, you must analyze the international experience in the field of training in the field of nuclear energy leading countries. Based on the analysis criteria have been formulated to optimize the educational process of training specialists for the nuclear power industry and test their effectiveness. The most effective and promising is the introduction of modern information technologies of training of students, such as real-time simulators, electronic educational resources, etc.

Virtual reality based surgery simulation for endoscopic gynaecology.

PubMed

Székely, G; Bajka, M; Brechbühler, C; Dual, J; Enzler, R; Haller, U; Hug, J; Hutter, R; Ironmonger, N; Kauer, M; Meier, V; Niederer, P; Rhomberg, A; Schmid, P; Schweitzer, G; Thaler, M; Vuskovic, V; Tröster, G

1999-01-01

Virtual reality (VR) based surgical simulator systems offer very elegant possibilities to both enrich and enhance traditional education in endoscopic surgery. However, while a wide range of VR simulator systems have been proposed and realized in the past few years, most of these systems are far from able to provide a reasonably realistic surgical environment. We explore the basic approaches to the current limits of realism and ultimately seek to extend these based on our description and analysis of the most important components of a VR-based endoscopic simulator. The feasibility of the proposed techniques is demonstrated on a first modular prototype system implementing the basic algorithms for VR-training in gynaecologic laparoscopy.

Team-training in healthcare: a narrative synthesis of the literature.

PubMed

Weaver, Sallie J; Dy, Sydney M; Rosen, Michael A

2014-05-01

Patients are safer and receive higher quality care when providers work as a highly effective team. Investment in optimising healthcare teamwork has swelled in the last 10 years. Consequently, evidence regarding the effectiveness for these interventions has also grown rapidly. We provide an updated review concerning the current state of team-training science and practice in acute care settings. A PubMed search for review articles examining team-training interventions in acute care settings published between 2000 and 2012 was conducted. Following identification of relevant reviews with searches terminating in 2008 and 2010, PubMed and PSNet were searched for additional primary studies published in 2011 and 2012. Primary outcomes included patient outcomes and quality indices. Secondary outcomes included teamwork behaviours, knowledge and attitudes. Both simulation and classroom-based team-training interventions can improve teamwork processes (eg, communication, coordination and cooperation), and implementation has been associated with improvements in patient safety outcomes. Thirteen studies published between 2011 and 2012 reported statistically significant changes in teamwork behaviours, processes or emergent states and 10 reported significant improvement in clinical care processes or patient outcomes, including mortality and morbidity. Effects were reported across a range of clinical contexts. Larger effect sizes were reported for bundled team-training interventions that included tools and organisational changes to support sustainment and transfer of teamwork competencies into daily practice. Overall, moderate-to-high-quality evidence suggests team-training can positively impact healthcare team processes and patient outcomes. Additionally, toolkits are available to support intervention development and implementation. Evidence suggests bundled team-training interventions and implementation strategies that embed effective teamwork as a foundation for other improvement efforts may offer greatest impact on patient outcomes.

Team-training in healthcare: a narrative synthesis of the literature

PubMed Central

Weaver, Sallie J; Dy, Sydney M; Rosen, Michael A

2014-01-01

Background Patients are safer and receive higher quality care when providers work as a highly effective team. Investment in optimising healthcare teamwork has swelled in the last 10 years. Consequently, evidence regarding the effectiveness for these interventions has also grown rapidly. We provide an updated review concerning the current state of team-training science and practice in acute care settings. Methods A PubMed search for review articles examining team-training interventions in acute care settings published between 2000 and 2012 was conducted. Following identification of relevant reviews with searches terminating in 2008 and 2010, PubMed and PSNet were searched for additional primary studies published in 2011 and 2012. Primary outcomes included patient outcomes and quality indices. Secondary outcomes included teamwork behaviours, knowledge and attitudes. Results Both simulation and classroom-based team-training interventions can improve teamwork processes (eg, communication, coordination and cooperation), and implementation has been associated with improvements in patient safety outcomes. Thirteen studies published between 2011 and 2012 reported statistically significant changes in teamwork behaviours, processes or emergent states and 10 reported significant improvement in clinical care processes or patient outcomes, including mortality and morbidity. Effects were reported across a range of clinical contexts. Larger effect sizes were reported for bundled team-training interventions that included tools and organisational changes to support sustainment and transfer of teamwork competencies into daily practice. Conclusions Overall, moderate-to-high-quality evidence suggests team-training can positively impact healthcare team processes and patient outcomes. Additionally, toolkits are available to support intervention development and implementation. Evidence suggests bundled team-training interventions and implementation strategies that embed effective teamwork as a foundation for other improvement efforts may offer greatest impact on patient outcomes. PMID:24501181

Beyond crisis resource management: new frontiers in human factors training for acute care medicine.

PubMed

Petrosoniak, Andrew; Hicks, Christopher M

2013-12-01

Error is ubiquitous in medicine, particularly during critical events and resuscitation. A significant proportion of adverse events can be attributed to inadequate team-based skills such as communication, leadership, situation awareness and resource utilization. Aviation-based crisis resource management (CRM) training using high-fidelity simulation has been proposed as a strategy to improve team behaviours. This review will address key considerations in CRM training and outline recommendations for the future of human factors education in healthcare. A critical examination of the current literature yields several important considerations to guide the development and implementation of effective simulation-based CRM training. These include defining a priori domain-specific objectives, creating an immersive environment that encourages deliberate practice and transfer-appropriate processing, and the importance of effective team debriefing. Building on research from high-risk industry, we suggest that traditional CRM training may be augmented with new training techniques that promote the development of shared mental models for team and task processes, address the effect of acute stress on team performance, and integrate strategies to improve clinical reasoning and the detection of cognitive errors. The evolution of CRM training involves a 'Triple Threat' approach that integrates mental model theory for team and task processes, training for stressful situations and metacognition and error theory towards a more comprehensive training paradigm, with roots in high-risk industry and cognitive psychology. Further research is required to evaluate the impact of this approach on patient-oriented outcomes.

[Innovative training for enhancing patient safety. Safety culture and integrated concepts].

PubMed

Rall, M; Schaedle, B; Zieger, J; Naef, W; Weinlich, M

2002-11-01

Patient safety is determined by the performance safety of the medical team. Errors in medicine are amongst the leading causes of death of hospitalized patients. These numbers call for action. Backgrounds, methods and new forms of training are introduced in this article. Concepts from safety research are transformed to the field of emergency medical treatment. Strategies from realistic patient simulator training sessions and innovative training concepts are discussed. The reasons for the high numbers of errors in medicine are not due to a lack of medical knowledge, but due to human factors and organisational circumstances. A first step towards an improved patient safety is to accept this. We always need to be prepared that errors will occur. A next step would be to separate "error" from guilt (culture of blame) allowing for a real analysis of accidents and establishment of meaningful incident reporting systems. Concepts with a good success record from aviation like "crew resource management" (CRM) training have been adapted my medicine and are ready to use. These concepts require theoretical education as well as practical training. Innovative team training sessions using realistic patient simulator systems with video taping (for self reflexion) and interactive debriefing following the sessions are very promising. As the need to reduce error rates in medicine is very high and the reasons, methods and training concepts are known, we are urged to implement these new training concepts widely and consequently. To err is human - not to counteract it is not.

Use of Combined A-Train Observations to Validate GEOS Model Simulated Dust Distributions During NAMMA

NASA Technical Reports Server (NTRS)

Nowottnick, E.

2007-01-01

During August 2006, the NASA African Multidisciplinary Analyses Mission (NAMMA) field experiment was conducted to characterize the structure of African Easterly Waves and their evolution into tropical storms. Mineral dust aerosols affect tropical storm development, although their exact role remains to be understood. To better understand the role of dust on tropical cyclogenesis, we have implemented a dust source, transport, and optical model in the NASA Goddard Earth Observing System (GEOS) atmospheric general circulation model and data assimilation system. Our dust source scheme is more physically based scheme than previous incarnations of the model, and we introduce improved dust optical and microphysical processes through inclusion of a detailed microphysical scheme. Here we use A-Train observations from MODIS, OMI, and CALIPSO with NAMMA DC-8 flight data to evaluate the simulated dust distributions and microphysical properties. Our goal is to synthesize the multi-spectral observations from the A-Train sensors to arrive at a consistent set of optical properties for the dust aerosols suitable for direct forcing calculations.

Development and implementation of a virtual reality laparoscopic colorectal training curriculum.

PubMed

Wynn, Greg; Lykoudis, Panagis; Berlingieri, Pasquale

2017-12-12

Contemporary surgical training can be compromised by fewer practical opportunities. Simulation can fill this gap to optimize skills' development and progress monitoring. A structured virtual reality (VR) laparoscopic sigmoid colectomy curriculum is constructed and its validity and outcomes assessed. Parameters and thresholds were defined by analysing the performance of six expert surgeons completing the relevant module on the LAP Mentor simulator. Fourteen surgical trainees followed the curriculum, performance being recorded and analysed. Evidence of validity was assessed. Time to complete procedure, number of movements of right and left instrument, and total path length of right and left instrument movements demonstrated evidence of validity and clear learning curves, with a median of 14 attempts needed to complete the curriculum. A structured curriculum is proposed for training in laparoscopic sigmoid colectomy in a VR environment based on objective metrics in addition to expert consensus. Validity has been demonstrated for some key metrics. Copyright © 2017 Elsevier Inc. All rights reserved.

We should ban the OPCAB approach in CABG, just as we should ban jetliners and bicycles, or maybe not!

PubMed Central

2016-01-01

Implementing a new technical process demands a complex preparation. In cardiac surgery this complex preparation is often reduced to visiting a surgeon who is familiar with a technique. The science of learning has identified that several steps are needed towards a successful implementation. The first step is the creation of a complete conceptual approach; this demands the deposit in writing of the actions and reactions of every involved party in this new approach. By definition a successful implementation starts with the creation of a group of involved individuals willing to collaborate towards a new goal. Then every teachable component, described in this concept, needs to be worked out in simulation training, from the smallest manual step to complete scenario training for complex situations. Finally, optimal organisational learning needs to have an existing database of the previous situation, a clear goal and objective and a new database where every new approach is restudied versus the previous one, using appropriate methods of corrections for variability. A complete implementation will always be more successful versus a partial one, due to the habit in partial implementation to return to the previous routines. PMID:27942400

Training program for the management of two obstetric emergencies within a French perinatal care network.

PubMed

Noblot, Edouard; Raia-Barjat, Tiphaine; Lajeunesse, Cecile; Trombert, Béatrice; Weiss, Stéphanie; Colombié, Maud; Chauleur, Céline

2015-06-01

To evaluate the effectiveness of an interdisciplinary team training program based on simulated scenarios and focusing on two obstetrical emergency situations: shoulder dystocia and complicated breech vaginal delivery (CBVD). These situations are rare, so there are few opportunities for real-life training, yet their competent and efficient management is crucial to minimizing the risks to mother and child. The target population for training comprised the 450 professionals working in the French regional perinatal care network ELENA. An expert committee defined the topics for the training program, selected the simulated scenarios and developed the evaluation grids. The training sessions were conducted by two qualified and experienced professionals in each maternity unit. They comprised a theoretical introduction followed by practical exercises in management of simulated emergency situations by the participant teams, with the aid of a mannequin. Each team completed the exercises twice, their performances being filmed, reviewed and evaluated in each case. The training sessions took place over 9 months between September 2012 and June 2013. A total of 298 professionals (obstetricians, residents in obstetrics, midwives and nursery nurses) were trained, representing 75% of the staff working in the ELENA perinatal care network. The results showed substantial and significant increases in the overall scores for management of the two emergency situations (from 74.5% to 91.4% for shoulder dystocia [p<0.0001], and from 67.2% to 88.4% [p<0.0001] for CBVD) as well as in the scores for all the specific areas of expertise assessed: safety, know-how, technique, team communication and communication with the patient. This study demonstrated the value of multidisciplinary team training for obstetric emergencies, encouraging the ELENA perinatal care network to implement an annual training program for its staff. Over and above our experience, the future establishment of a national education program to optimize the management of obstetric emergencies seems to be essential. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

A Transfer of Training Study of Control Loader Dynamics

NASA Technical Reports Server (NTRS)

Cardullo, Frank M.; Stanco, Anthony A.; Kelly, Lon C.; Houck, Jacob A.; Grube, Richard C.

2011-01-01

The control inceptor used in a simulated vehicle is an important part in maintaining the fidelity of a simulation. The force feedback provided by the control inceptor gives the operator important cues to maintain adequate performance. The dynamics of a control inceptor are typically based on a second order spring mass damper system with damping, force gradient, breakout force, and natural frequency parameters. Changing these parameters can have a great effect on pilot or driver control of the vehicle. The neuromuscular system has a very important role in manipulating the control inceptor within a vehicle. Many studies by McRuer, Aponso, and Hess have dealt with modeling the neuromuscular system and quantifying the effects of a high fidelity control loader as compared to a low fidelity control loader. Humans are adaptive in nature and their control behavior changes based on different control loader dynamics. Humans will change their control behavior to maintain tracking bandwidth and minimize tracking error. This paper reports on a quasi-transfer of training experiment which was performed at the NASA Langley Research Center. The quasi transfer of training study used a high fidelity control loader and a low fidelity control loader. Subjects trained in both simulations and then were transferred to the high fidelity control loader simulation. The parameters for the high fidelity control loader were determined from the literature. The low fidelity control loader parameters were found through testing of a simple computer joystick. A disturbance compensatory task is employed. The compensatory task involves implementing a simple horizon out the window display. A disturbance consisting of a sum of sines is used. The task consists of the subject compensating for the disturbance on the roll angle of the aircraft. The vehicle dynamics are represented as 1/s and 1/s2. The subject will try to maintain level flight throughout the experiment. The subjects consist of non-pilots to remove any effects of pilot experience. First, this paper discusses the implementation of the disturbance compensation task. Second, the high and low fidelity parameters used within the experiment are presented. Finally, an explanation of results from the experiments is presented.

Accomplishments and challenges of surgical simulation.

PubMed

Satava, R M

2001-03-01

For nearly a decade, advanced computer technologies have created extraordinary educational tools using three-dimensional (3D) visualization and virtual reality. Pioneering efforts in surgical simulation with these tools have resulted in a first generation of simulators for surgical technical skills. Accomplishments include simulations with 3D models of anatomy for practice of surgical tasks, initial assessment of student performance in technical skills, and awareness by professional societies of potential in surgical education and certification. However, enormous challenges remain, which include improvement of technical fidelity, standardization of accurate metrics for performance evaluation, integration of simulators into a robust educational curriculum, stringent evaluation of simulators for effectiveness and value added to surgical training, determination of simulation application to certification of surgical technical skills, and a business model to implement and disseminate simulation successfully throughout the medical education community. This review looks at the historical progress of surgical simulators, their accomplishments, and the challenges that remain.

Wind energy system time-domain (WEST) analyzers

NASA Technical Reports Server (NTRS)

Dreier, M. E.; Hoffman, J. A.

1981-01-01

A portable analyzer which simulates in real time the complex nonlinear dynamics of horizontal axis wind energy systems was constructed. Math models for an aeroelastic rotor featuring nonlinear aerodynamic and inertial terms were implemented with high speed digital controllers and analog calculation. This model was combined with other math models of elastic supports, control systems, a power train and gimballed rotor kinematics. A stroboscopic display system graphically depicting distributed blade loads, motion, and other aerodynamic functions on a cathode ray tube is included. Limited correlation efforts showed good comparison between the results of this analyzer and other sophisticated digital simulations. The digital simulation results were successfully correlated with test data.

A Serious Game for Massive Training and Assessment of French Soldiers Involved in Forward Combat Casualty Care (3D-SC1): Development and Deployment.

PubMed

Pasquier, Pierre; Mérat, Stéphane; Malgras, Brice; Petit, Ludovic; Queran, Xavier; Bay, Christian; Boutonnet, Mathieu; Jault, Patrick; Ausset, Sylvain; Auroy, Yves; Perez, Jean Paul; Tesnière, Antoine; Pons, François; Mignon, Alexandre

2016-05-18

The French Military Health Service has standardized its military prehospital care policy in a ''Sauvetage au Combat'' (SC) program (Forward Combat Casualty Care). A major part of the SC training program relies on simulations, which are challenging and costly when dealing with more than 80,000 soldiers. In 2014, the French Military Health Service decided to develop and deploy 3D-SC1, a serious game (SG) intended to train and assess soldiers managing the early steps of SC. The purpose of this paper is to describe the creation and production of 3D-SC1 and to present its deployment. A group of 10 experts and the Paris Descartes University Medical Simulation Department spin-off, Medusims, coproduced 3D-SC1. Medusims are virtual medical experiences using 3D real-time videogame technology (creation of an environment and avatars in different scenarios) designed for educational purposes (training and assessment) to simulate medical situations. These virtual situations have been created based on real cases and tested on mannequins by experts. Trainees are asked to manage specific situations according to best practices recommended by SC, and receive a score and a personalized feedback regarding their performance. The scenario simulated in the SG is an attack on a patrol of 3 soldiers with an improvised explosive device explosion as a result of which one soldier dies, one soldier is slightly stunned, and the third soldier experiences a leg amputation and other injuries. This scenario was first tested with mannequins in military simulation centers, before being transformed into a virtual 3D real-time scenario using a multi-support, multi-operating system platform, Unity. Processes of gamification and scoring were applied, with 2 levels of difficulty. A personalized debriefing was integrated at the end of the simulations. The design and production of the SG took 9 months. The deployment, performed in 3 months, has reached 84 of 96 (88%) French Army units, with a total of 818 hours of connection in the first 3 months. The development of 3D-SC1 involved a collaborative platform with interdisciplinary actors from the French Health Service, a university, and videogame industry. Training each French soldier with simulation exercises and mannequins is challenging and costly. Implementation of SGs into the training program could offer a unique opportunity at a lower cost to improve training and subsequently the real-time performance of soldiers when managing combat casualties; ideally, these should be combined with physical simulations.

Analog hardware implementation of neocognitron networks

NASA Astrophysics Data System (ADS)

Inigo, Rafael M.; Bonde, Allen, Jr.; Holcombe, Bradford

1990-08-01

This paper deals with the analog implementation of neocognitron based neural networks. All of Fukushima''s and related work on the neocognitron is based on digital computer simulations. To fully take advantage of the power of this network paradigm an analog electronic approach is proposed. We first implemented a 6-by-6 sensor network with discrete analog components and fixed weights. The network was given weight values to recognize the characters U L and F. These characters are recognized regardless of their location on the sensor and with various levels of distortion and noise. The network performance has also shown an excellent correlation with software simulation results. Next we implemented a variable weight network which can be trained to recognize simple patterns by means of self-organization. The adaptable weights were implemented with PETs configured as voltage-controlled resistors. To implement a variable weight there must be some type of " memory" to store the weight value and hold it while the value is reinforced or incremented. Two methods were evaluated: an analog sample-hold circuit and a digital storage scheme using binary counters. The latter is preferable for VLSI implementation because it uses standard components and does not require the use of capacitors. The analog design and implementation of these small-scale networks demonstrates the feasibility of implementing more complicated ANNs in electronic hardware. The circuits developed can also be designed for VLSI implementation. 1.

Inverting the Pendulum Using Fuzzy Control (Center Director's Discretionary Fund (Project 93-02)

NASA Technical Reports Server (NTRS)

Kissel, R. R.; Sutherland, W. T.

1997-01-01

A single pendulum was simulated in software and then built on a rotary base. A fuzzy controller was used to show its advantages as a nonlinear controller since bringing the pendulum inverted is extremely nonlinear. The controller was implemented in a Motorola 6811 microcontroller. A double pendulum was simulated and fuzzy control was used to hold it in a vertical position. The double pendulum was not built into hardware for lack of time. This project was for training and to show advantages of fuzzy control.

[Actor as a simulated patient in medical education at the University of Pécs].

PubMed

Koppán, Ágnes; Eklicsné Lepenye, Katalin; Halász, Renáta; Sebők, Judit; Szemán, Eszter; Németh, Zsuzsanna; Rendeki, Szilárd

2017-07-01

Medical training in the 21st century faces simulation-based education as one of the challenges that efficiently contributes to clinical skills development while moderating the burden on the clinicians and patients alike. The University of Pécs, Medical School has launched a simulation program in the MediSkillsLab based on history taking with actors to improve patient interviewing communication skills. This new program was inspired by experiences gathered in previous medical language teaching and integrates the method of the "Standardized Patient Program". The method has been applied in America since the 1960s. This is the first time the program has been introduced in Hungary and implemented in an interdisciplinary design, where medical specialists, linguists, actor-patients and medical students collaborate to improve professional, language and communicative competence of the students. A course like this has its pivotal role in the medical training, and as a result more efficient and patient-oriented communication may take place at the clinical setting. Orv Hetil. 2017; 158(26): 1022-1027.

Changing trends in residents-as-teachers across graduate medical education

PubMed Central

Al Achkar, Morhaf; Hanauer, Mathew; Morrison, Elizabeth H; Davies, M Kelly; Oh, Robert C

2017-01-01

Background Teaching residents how to teach is a critical part of residents’ training in graduate medical education (GME). The purpose of this study was to assess the change in resident-as-teacher (RaT) instruction in GME over the past 15 years in the US. Methods We used a quantitative and qualitative survey of all program directors (PDs) across specialties. We compared our findings with a previous work from 2000–2001 that studied the same matter. Finally, we qualitatively analyzed PDs’ responses regarding the reasons for implementing and not implementing RaT instruction. Results Two hundred and twenty-one PDs completed the survey, which yields a response rate of 12.6%. Over 80% of PDs implement RaT, an increase of 26.34% compared to 2000–2001. RaT instruction uses multiple methods with didactic lectures reported as the most common, followed by role playing in simulated environments, then observing and giving feedback. Residents giving feedback, clinical supervision, and bedside teaching were the top three targeted skills. Through our qualitative analysis we identified five main reasons for implementing RaT: teaching is part of the residents’ role; learners desire formal RaT training; regulatory bodies require RaT training; RaT improves residents’ education; and RaT prepares residents for their current and future roles. Conclusion The use of RaT instruction has increased significantly in GME. More and more PDs are realizing its importance in the residents’ formative training experience. Future studies should examine the effectiveness of each method for RaT instruction. PMID:28496376

Interactive X-ray and proton therapy training and simulation.

PubMed

Hamza-Lup, Felix G; Farrar, Shane; Leon, Erik

2015-10-01

External beam X-ray therapy (XRT) and proton therapy (PT) are effective and widely accepted forms of treatment for many types of cancer. However, the procedures require extensive computerized planning. Current planning systems for both XRT and PT have insufficient visual aid to combine real patient data with the treatment device geometry to account for unforeseen collisions among system components and the patient. The 3D surface representation (S-rep) is a widely used scheme to create 3D models of physical objects. 3D S-reps have been successfully used in CAD/CAM and, in conjunction with texture mapping, in the modern gaming industry to customize avatars and improve the gaming realism and sense of presence. We are proposing a cost-effective method to extract patient-specific S-reps in real time and combine them with the treatment system geometry to provide a comprehensive simulation of the XRT/PT treatment room. The X3D standard is used to implement and deploy the simulator on the web, enabling its use not only for remote specialists' collaboration, simulation, and training, but also for patient education. An objective assessment of the accuracy of the S-reps obtained proves the potential of the simulator for clinical use.

Incorporation of the fluoroless C-Arm Trainer at the American Urological Association hands on training percutaneous renal access.

PubMed

Noureldin, Yasser A; Hoenig, David M; Zhao, Philip; Elsamra, Sammy E; Stern, Joshua; Gaunay, Geoffrey; Motamedinia, Piruz; Okeke, Zeph; Rastinehad, Ardeshir R; Sweet, Robert M

2018-07-01

To assess for usefulness and validity evidence for incorporating the C-Arm Trainer (CAT) simulator into the annual AUA hands on course for training percutaneous nephrolithotomy (PCNL). The course started with a didactic session followed by four stations for training the "bull's eye" technique using the CAT simulator. Each station included a pre-test, 30-min practice on the simulator, and post-test. All participants were assessed using a 4-item checklist. All participants were asked to fill in a qualitative self-assessment questionnaire after the pre- and the post-test, and respond to a course evaluation questionnaire and post-course survey. A total of 38 physicians, who attended the hands on course, voluntarily participated in the study. Only 21.1% had previous practice on PCNL simulators. Compared with the results of the checklist total score and the qualitative self-assessment questionnaire scores after the pre-test, there was significant improvement in the checklist total score (p < 0.001), temporal demands (p = 0.003), situational stress (p = 0.003, and performance (0.003) after the post-test. A total of 14 (36%) participants responded to the course evaluation questionnaire, 50% evaluated the course as excellent, 28.6% as very good, and 21.4% as good. Unfortunately, only five (13%) participants responded to the post-course survey, 4/5 implemented the new competencies and knowledge into their practice, and 3/5 have attempted to obtain fluoroscopic guided PCA without assistance. The CAT simulator was considered useful for training the percutaneous renal access procedure. There was significant improvement in the qualitative and quantitative assessment parameters after the post-test compared with the pre-test.

Cost and logistics of implementing a tissue-based American College of Surgeons/Association of Program Directors in Surgery surgical skills curriculum for general surgery residents of all clinical years.

PubMed

Henry, Brandon; Clark, Philip; Sudan, Ranjan

2014-02-01

The cost and logistics of deploying the American College of Surgeons (ACS)/Association of Program Directors in Surgery (APDS) National Technical Skills Curriculum across all training years are not known. This information is essential for residency programs choosing to adopt similar curricula. A task force evaluated the authors' institution's existing simulation curriculum and enhanced it by implementing the ACS/APDS modules. A 35-module curriculum was administered to 35 general surgery residents across all 5 clinical years. The costs and logistics were noted, and resident satisfaction was assessed. The annual operational cost was $110,300 ($3,150 per resident). Cost per module, per resident was $940 for the cadaveric module compared with $220 and $240 for dry simulation and animal tissue-based modules, respectively. Resident satisfaction improved from 2.45 to 4.78 on a 5-point, Likert-type scale after implementing the ACS/APDS modules. The ACS/APDS skills curriculum was implemented successfully across all clinical years. Cadaveric modules were the most expensive. Animal and dry simulation modules were equivalent in cost. The addition of tissue-based modules was associated with high satisfaction. Copyright © 2014 Elsevier Inc. All rights reserved.

[Brachytherapy training].

PubMed

Hannoun-Lévi, J-M; Marchesi, V; Peiffert, D

2013-04-01

Treatment technique training needs theoretical and practical knowledge allowing proposing the right treatment for the right patient, but also allowing performing the technical gesture in the best conditions for an optimal result with a maximal security. The evolution of the brachytherapy techniques needs the set up of specific theoretical and practical training sessions. The present article focuses on the importance of the brachytherapy training as well as the different means currently available for the young radiation oncologist community for perfecting their education. National and international trainings are presented. The role of the simulation principle in the frame of brachytherapy is also discussed. Even if brachytherapy is not always an easy technique, its efficacy and its medico-economical impact need to be passed down to motivated students with the implementation of relevant educational means. Copyright © 2013 Société française de radiothérapie oncologique (SFRO). Published by Elsevier SAS. All rights reserved.

Emergent Capabilities Converging into M and S 2.0

NASA Technical Reports Server (NTRS)

Reitz, Emilie; Reist, Jay

2012-01-01

The continued operational environment complexity faced by the Department of Defense, despite a restricted resource environment, is a mandate for greater adaptability and availability in joint training. To address these constraints, this paper proposes a model for the potential integration of adaptability training, virtual world capabilities and immersive training into the wider Joint Live Virtual and Constructive (JLVC) Federation, supported by human, social, cultural and behavior modeling, and measurement and assessment. By fusing those capabilities and modeling and simulation enhancements into the JLVC federation, it will create a force who is more apt to arrive at and implement correct decisions, and more able to appropriately seize initiative in the field. The model would allow for the testing and training of capabilities and TTPs that cannot be reasonably explored to their logical conclusions in a 'live' environment, as well as enhance training fidelity for all echelons and tasks.

Gaussian process regression of chirplet decomposed ultrasonic B-scans of a simulated design case

NASA Astrophysics Data System (ADS)

Wertz, John; Homa, Laura; Welter, John; Sparkman, Daniel; Aldrin, John

2018-04-01

The US Air Force seeks to implement damage tolerant lifecycle management of composite structures. Nondestructive characterization of damage is a key input to this framework. One approach to characterization is model-based inversion of the ultrasonic response from damage features; however, the computational expense of modeling the ultrasonic waves within composites is a major hurdle to implementation. A surrogate forward model with sufficient accuracy and greater computational efficiency is therefore critical to enabling model-based inversion and damage characterization. In this work, a surrogate model is developed on the simulated ultrasonic response from delamination-like structures placed at different locations within a representative composite layup. The resulting B-scans are decomposed via the chirplet transform, and a Gaussian process model is trained on the chirplet parameters. The quality of the surrogate is tested by comparing the B-scan for a delamination configuration not represented within the training data set. The estimated B-scan has a maximum error of ˜15% for an estimated reduction in computational runtime of ˜95% for 200 function calls. This considerable reduction in computational expense makes full 3D characterization of impact damage tractable.

EFFECTIVENESS OF A COMPREHENSIVE MENTAL SKILLS CURRICULUM IN ENHANCING SURGICAL PERFORMANCE: RESULTS OF A RANDOMIZED CONTROLLED TRIAL

PubMed Central

Stefanidis, Dimitrios; Anton, Nicholas E; Howley, Lisa D; Bean, Eric; Yurco, Ashley; Pimentel, Manuel E; Davis, Cameron K

2016-01-01

Introduction We hypothesized that the implementation of a novel mental skills curriculum (MSC) during laparoscopic simulator training would improve mental skills and performance, and decrease stress. Methods Sixty volunteer novices were randomized into intervention and control groups. All participants received FLS training while the intervention group also participated in the MSC. Skill transfer and retention were assessed on a live porcine model after training and 2 months later, respectively. Performance was assessed using the Test of Performance Strategies-2 (TOPS-2) for mental skills, FLS metrics for laparoscopic performance, and the State Trait Anxiety Inventory (STAI-6) and heart rate (HR) for stress. Results Fifty-five participants (92%) completed training and the transfer test, and 46 (77%) the retention test. There were no significant differences between groups at baseline. Compared to controls the intervention group significantly improved their mental skill use, demonstrated higher laparoscopic skill improvement during retention, and reported less stress during the transfer test. Conclusions The MSC implemented in this study effectively enhanced participants’ mental skill use, reduced cognitive stress in the operating room with a small impact on laparoscopic performance. PMID:27908500

A novel critical skills curriculum for surgical interns incorporating simulation training improves readiness for acute inpatient care.

PubMed

Antonoff, Mara B; Shelstad, Ryan C; Schmitz, Connie; Chipman, Jeffrey; D'Cunha, Jonathan

2009-01-01

Surgical interns encounter complex, acute care situations often managed with limited supervision. Furthermore, medical school training does not adequately prepare students for special surgical considerations. Using simulation training, we implemented a course aimed at improving surgical intern readiness for responding to unique, life-threatening issues encountered in daily surgical care. Twenty University of Minnesota surgical interns participated in the 3-week course. The first session consisted of interactive didactics and simulation covering hypoxia, shock, and metabolic disturbances; the second session addressed cardiopulmonary emergencies, including ventricular assist device and pacemaker use. Electronic simulation scenarios comprised the third session, allowing learners to demonstrate learned/practiced skills. The outcomes were assessed objectively (pretest and posttest) and subjectively (standardized feedback evaluations). Fifteen learners completed the pretest and posttest. The mean absolute score increase was 14% with average relative score improvement of 43%. Twenty learners completed feedback evaluations using a standard 5-point Likert scale. Respondents scored the first 2 sessions on topic importance (5 = very important), giving the first session 4.90 (+/- 0.31) and the second session 4.45 (+/- 0.89). Respondents ranked their confidence in executing practiced skills on actual patients (5 = very confident) as 4.24 (+/- 0.71). There was uniform support for the value of the electronic simulation scenarios as enhanced learning tools. We developed a course for surgical interns incorporating didactics and simulation. Learners demonstrated objective improvement in testing and reported that the course topics were highly important. After course completion, learners provided feedback indicating a high level of confidence in executing practiced skills, suggesting improved preparation for acute surgical care.

Factors affecting GEBV accuracy with single-step Bayesian models.

PubMed

Zhou, Lei; Mrode, Raphael; Zhang, Shengli; Zhang, Qin; Li, Bugao; Liu, Jian-Feng

2018-01-01

A single-step approach to obtain genomic prediction was first proposed in 2009. Many studies have investigated the components of GEBV accuracy in genomic selection. However, it is still unclear how the population structure and the relationships between training and validation populations influence GEBV accuracy in terms of single-step analysis. Here, we explored the components of GEBV accuracy in single-step Bayesian analysis with a simulation study. Three scenarios with various numbers of QTL (5, 50, and 500) were simulated. Three models were implemented to analyze the simulated data: single-step genomic best linear unbiased prediction (GBLUP; SSGBLUP), single-step BayesA (SS-BayesA), and single-step BayesB (SS-BayesB). According to our results, GEBV accuracy was influenced by the relationships between the training and validation populations more significantly for ungenotyped animals than for genotyped animals. SS-BayesA/BayesB showed an obvious advantage over SSGBLUP with the scenarios of 5 and 50 QTL. SS-BayesB model obtained the lowest accuracy with the 500 QTL in the simulation. SS-BayesA model was the most efficient and robust considering all QTL scenarios. Generally, both the relationships between training and validation populations and LD between markers and QTL contributed to GEBV accuracy in the single-step analysis, and the advantages of single-step Bayesian models were more apparent when the trait is controlled by fewer QTL.

On the thresholds in modeling of high flows via artificial neural networks - A bootstrapping analysis

NASA Astrophysics Data System (ADS)

Panagoulia, D.; Trichakis, I.

2012-04-01

Considering the growing interest in simulating hydrological phenomena with artificial neural networks (ANNs), it is useful to figure out the potential and limits of these models. In this study, the main objective is to examine how to improve the ability of an ANN model to simulate extreme values of flow utilizing a priori knowledge of threshold values. A three-layer feedforward ANN was trained by using the back propagation algorithm and the logistic function as activation function. By using the thresholds, the flow was partitioned in low (x < μ), medium (μ ≤ x ≤ μ + 2σ) and high (x > μ + 2σ) values. The employed ANN model was trained for high flow partition and all flow data too. The developed methodology was implemented over a mountainous river catchment (the Mesochora catchment in northwestern Greece). The ANN model received as inputs pseudo-precipitation (rain plus melt) and previous observed flow data. After the training was completed the bootstrapping methodology was applied to calculate the ANN confidence intervals (CIs) for a 95% nominal coverage. The calculated CIs included only the uncertainty, which comes from the calibration procedure. The results showed that an ANN model trained specifically for high flows, with a priori knowledge of the thresholds, can simulate these extreme values much better (RMSE is 31.4% less) than an ANN model trained with all data of the available time series and using a posteriori threshold values. On the other hand the width of CIs increases by 54.9% with a simultaneous increase by 64.4% of the actual coverage for the high flows (a priori partition). The narrower CIs of the high flows trained with all data may be attributed to the smoothing effect produced from the use of the full data sets. Overall, the results suggest that an ANN model trained with a priori knowledge of the threshold values has an increased ability in simulating extreme values compared with an ANN model trained with all the data and a posteriori knowledge of the thresholds.

Simulation-based assessment to identify critical gaps in safe anesthesia resident performance.

PubMed

Blum, Richard H; Boulet, John R; Cooper, Jeffrey B; Muret-Wagstaff, Sharon L

2014-01-01

Valid methods are needed to identify anesthesia resident performance gaps early in training. However, many assessment tools in medicine have not been properly validated. The authors designed and tested use of a behaviorally anchored scale, as part of a multiscenario simulation-based assessment system, to identify high- and low-performing residents with regard to domains of greatest concern to expert anesthesiology faculty. An expert faculty panel derived five key behavioral domains of interest by using a Delphi process (1) Synthesizes information to formulate a clear anesthetic plan; (2) Implements a plan based on changing conditions; (3) Demonstrates effective interpersonal and communication skills with patients and staff; (4) Identifies ways to improve performance; and (5) Recognizes own limits. Seven simulation scenarios spanning pre-to-postoperative encounters were used to assess performances of 22 first-year residents and 8 fellows from two institutions. Two of 10 trained faculty raters blinded to trainee program and training level scored each performance independently by using a behaviorally anchored rating scale. Residents, fellows, facilitators, and raters completed surveys. Evidence supporting the reliability and validity of the assessment scores was procured, including a high generalizability coefficient (ρ = 0.81) and expected performance differences between first-year resident and fellow participants. A majority of trainees, facilitators, and raters judged the assessment to be useful, realistic, and representative of critical skills required for safe practice. The study provides initial evidence to support the validity of a simulation-based performance assessment system for identifying critical gaps in safe anesthesia resident performance early in training.

Training on N.O.T.E.S.: from history we learn.

PubMed

Al-Akash, M; Boyle, E; Tanner, W A

2009-06-01

Surgical errors occurring early in the learning curve of laparoscopic surgery providers delayed the uptake and progress of minimally invasive surgery (MIS) for years. This taught us a valuable lesson; innovations in surgical techniques should not be rapidly implemented until all aspects including applicability, feasibility and safety have been fully tested. In 2005, the Natural Orifice Surgery Consortium for Assessment and Research (NOSCAR) published a white paper highlighting the barriers to NOTES development and identifying key elements for its progress. One of these elements is the training of future providers. Proficiency-based, virtual reality simulation will offer a feasible alternative to animal testing once the safety and efficacy parameters of NOTES are established. Recent advances in imaging including computed tomography (CT) scanning, magnetic resonance imaging (MRI) scanning, and ultrasound (US) scanning can offer improved image registration and real-time tracking. Combining these advanced imaging technologies with the newly designed virtual reality simulators will result in a fully comprehensive simulation curriculum which will offer a unique facility for future NOTES providers to train anytime, anywhere, and as much as they need to in order to achieve the pre-set proficiency levels for a variety of NOTES procedures. Furthermore they will incorporate patient-specific anatomical models obtained from patient imaging and uploaded onto the simulator to ensure face reliability and validity assurance. Training in a clean, safe environment with proximate feedback and performance analysis will help accelerate the learning curve and therefore improve patients' safety and outcomes in order to maximize the benefits of innovative access procedures such as NOTES.

A Framework for Determining the Return on Investment of Simulation-Based Training in Health Care

PubMed Central

Bukhari, Hatim; Andreatta, Pamela; Goldiez, Brian; Rabelo, Luis

2017-01-01

This article describes a framework that has been developed to monetize the real value of simulation-based training in health care. A significant consideration has been given to the incorporation of the intangible and qualitative benefits, not only the tangible and quantitative benefits of simulation-based training in health care. The framework builds from three works: the value measurement methodology (VMM) used by several departments of the US Government, a methodology documented in several books by Dr Jack Phillips to monetize various training approaches, and a traditional return on investment methodology put forth by Frost and Sullivan, and Immersion Medical. All 3 source materials were adapted to create an integrated methodology that can be readily implemented. This article presents details on each of these methods and how they can be integrated and presents a framework that integrates the previous methods. In addition to that, it describes the concept and the application of the developed framework. As a test of the applicability of the framework, a real case study has been used to demonstrate the application of the framework. This case study provides real data related to the correlation between the pediatric patient cardiopulmonary arrest (CPA) survival rates and a simulation-based mock codes at the University of Michigan tertiary care academic medical center. It is important to point out that the proposed framework offers the capability to consider a wide range of benefits and values, but on the other hand, there are several limitations that has been discussed and need to be taken in consideration. PMID:28133988

A Framework for Determining the Return on Investment of Simulation-Based Training in Health Care.

PubMed

Bukhari, Hatim; Andreatta, Pamela; Goldiez, Brian; Rabelo, Luis

2017-01-01

This article describes a framework that has been developed to monetize the real value of simulation-based training in health care. A significant consideration has been given to the incorporation of the intangible and qualitative benefits, not only the tangible and quantitative benefits of simulation-based training in health care. The framework builds from three works: the value measurement methodology (VMM) used by several departments of the US Government, a methodology documented in several books by Dr Jack Phillips to monetize various training approaches, and a traditional return on investment methodology put forth by Frost and Sullivan, and Immersion Medical. All 3 source materials were adapted to create an integrated methodology that can be readily implemented. This article presents details on each of these methods and how they can be integrated and presents a framework that integrates the previous methods. In addition to that, it describes the concept and the application of the developed framework. As a test of the applicability of the framework, a real case study has been used to demonstrate the application of the framework. This case study provides real data related to the correlation between the pediatric patient cardiopulmonary arrest (CPA) survival rates and a simulation-based mock codes at the University of Michigan tertiary care academic medical center. It is important to point out that the proposed framework offers the capability to consider a wide range of benefits and values, but on the other hand, there are several limitations that has been discussed and need to be taken in consideration.

Impact of a web based interactive simulation game (PULSE) on nursing students' experience and performance in life support training--a pilot study.

PubMed

Cook, Neal F; McAloon, Toni; O'Neill, Philip; Beggs, Richard

2012-08-01

The delivery of effective life support measures is highly associated with the quality, design and implementation of the education that underpins it. Effectively responding to a critical event is a requirement for all nurses illustrating the need for effective educational approaches from pre-registration training through to enhancing and maintaining life support skills after qualification. This paper reports the findings of utilising a web-based multimedia simulation game PULSE (Platform for Undergraduate Life Support Education). The platform was developed to enhance the student experience of life support education, to motivate on-going learning and engagement and to improve psychomotor skills associated with the provision of Intermediate Life Support (ILS) training. Pre training participants played PULSE and during life support training data was collected from an intervention and a control group of final year undergraduate nursing students (N=34). Quantitative analysis of performance took place and qualitative data was generated from a questionnaire assessing the learning experience. A statistically significant difference was found between the competence the groups displayed in the three skills sets of checking equipment, airway assessment and the safe/effective use of defibrillator at ILS level, and PULSE was positively evaluated as an educational tool when used alongside traditional life support training. Copyright © 2011 Elsevier Ltd. All rights reserved.

Helios: a Multi-Purpose LIDAR Simulation Framework for Research, Planning and Training of Laser Scanning Operations with Airborne, Ground-Based Mobile and Stationary Platforms

NASA Astrophysics Data System (ADS)

Bechtold, S.; Höfle, B.

2016-06-01

In many technical domains of modern society, there is a growing demand for fast, precise and automatic acquisition of digital 3D models of a wide variety of physical objects and environments. Laser scanning is a popular and widely used technology to cover this demand, but it is also expensive and complex to use to its full potential. However, there might exist scenarios where the operation of a real laser scanner could be replaced by a computer simulation, in order to save time and costs. This includes scenarios like teaching and training of laser scanning, development of new scanner hardware and scanning methods, or generation of artificial scan data sets to support the development of point cloud processing and analysis algorithms. To test the feasibility of this idea, we have developed a highly flexible laser scanning simulation framework named Heidelberg LiDAR Operations Simulator (HELIOS). HELIOS is implemented as a Java library and split up into a core component and multiple extension modules. Extensible Markup Language (XML) is used to define scanner, platform and scene models and to configure the behaviour of modules. Modules were developed and implemented for (1) loading of simulation assets and configuration (i.e. 3D scene models, scanner definitions, survey descriptions etc.), (2) playback of XML survey descriptions, (3) TLS survey planning (i.e. automatic computation of recommended scanning positions) and (4) interactive real-time 3D visualization of simulated surveys. As a proof of concept, we show the results of two experiments: First, a survey planning test in a scene that was specifically created to evaluate the quality of the survey planning algorithm. Second, a simulated TLS scan of a crop field in a precision farming scenario. The results show that HELIOS fulfills its design goals.

A GPU Simulation Tool for Training and Optimisation in 2D Digital X-Ray Imaging.

PubMed

Gallio, Elena; Rampado, Osvaldo; Gianaria, Elena; Bianchi, Silvio Diego; Ropolo, Roberto

2015-01-01

Conventional radiology is performed by means of digital detectors, with various types of technology and different performance in terms of efficiency and image quality. Following the arrival of a new digital detector in a radiology department, all the staff involved should adapt the procedure parameters to the properties of the detector, in order to achieve an optimal result in terms of correct diagnostic information and minimum radiation risks for the patient. The aim of this study was to develop and validate a software capable of simulating a digital X-ray imaging system, using graphics processing unit computing. All radiological image components were implemented in this application: an X-ray tube with primary beam, a virtual patient, noise, scatter radiation, a grid and a digital detector. Three different digital detectors (two digital radiography and a computed radiography systems) were implemented. In order to validate the software, we carried out a quantitative comparison of geometrical and anthropomorphic phantom simulated images with those acquired. In terms of average pixel values, the maximum differences were below 15%, while the noise values were in agreement with a maximum difference of 20%. The relative trends of contrast to noise ratio versus beam energy and intensity were well simulated. Total calculation times were below 3 seconds for clinical images with pixel size of actual dimensions less than 0.2 mm. The application proved to be efficient and realistic. Short calculation times and the accuracy of the results obtained make this software a useful tool for training operators and dose optimisation studies.

Flight Testing an Iced Business Jet for Flight Simulation Model Validation

NASA Technical Reports Server (NTRS)

Ratvasky, Thomas P.; Barnhart, Billy P.; Lee, Sam; Cooper, Jon

2007-01-01

A flight test of a business jet aircraft with various ice accretions was performed to obtain data to validate flight simulation models developed through wind tunnel tests. Three types of ice accretions were tested: pre-activation roughness, runback shapes that form downstream of the thermal wing ice protection system, and a wing ice protection system failure shape. The high fidelity flight simulation models of this business jet aircraft were validated using a software tool called "Overdrive." Through comparisons of flight-extracted aerodynamic forces and moments to simulation-predicted forces and moments, the simulation models were successfully validated. Only minor adjustments in the simulation database were required to obtain adequate match, signifying the process used to develop the simulation models was successful. The simulation models were implemented in the NASA Ice Contamination Effects Flight Training Device (ICEFTD) to enable company pilots to evaluate flight characteristics of the simulation models. By and large, the pilots confirmed good similarities in the flight characteristics when compared to the real airplane. However, pilots noted pitch up tendencies at stall with the flaps extended that were not representative of the airplane and identified some differences in pilot forces. The elevator hinge moment model and implementation of the control forces on the ICEFTD were identified as a driver in the pitch ups and control force issues, and will be an area for future work.

Educational program in crisis management for cardiac surgery teams including high realism simulation.

PubMed

Stevens, Louis-Mathieu; Cooper, Jeffrey B; Raemer, Daniel B; Schneider, Robert C; Frankel, Allan S; Berry, William R; Agnihotri, Arvind K

2012-07-01

Cardiac surgery demands effective teamwork for safe, high-quality care. The objective of this pilot study was to develop a comprehensive program to sharpen performance of experienced cardiac surgical teams in acute crisis management. We developed and implemented an educational program for cardiac surgery based on high realism acute crisis simulation scenarios and interactive whole-unit workshop. The impact of these interventions was assessed with postintervention questionnaires, preintervention and 6-month postintervention surveys, and structured interviews. The realism of the acute crisis simulation scenarios gradually improved; most participants rated both the simulation and whole-unit workshop as very good or excellent. Repeat simulation training was recommended every 6 to 12 months by 82% of the participants. Participants of the interactive workshop identified 2 areas of highest priority: encouraging speaking up about critical information and interprofessional information sharing. They also stressed the importance of briefings, early communication of surgical plan, knowing members of the team, and continued simulation for practice. The pre/post survey response rates were 70% (55/79) and 66% (52/79), respectively. The concept of working as a team improved between surveys (P = .028), with a trend for improvement in gaining common understanding of the plan before a procedure (P = .075) and appropriate resolution of disagreements (P = .092). Interviewees reported that the training had a positive effect on their personal behaviors and patient care, including speaking up more readily and communicating more clearly. Comprehensive team training using simulation and a whole-unit interactive workshop can be successfully deployed for experienced cardiac surgery teams with demonstrable benefits in participant's perception of team performance. Copyright © 2012 The American Association for Thoracic Surgery. Published by Mosby, Inc. All rights reserved.

Leveraging Health Care Simulation Technology for Human Factors Research: Closing the Gap Between Lab and Bedside.

PubMed

Deutsch, Ellen S; Dong, Yue; Halamek, Louis P; Rosen, Michael A; Taekman, Jeffrey M; Rice, John

2016-11-01

We describe health care simulation, designed primarily for training, and provide examples of how human factors experts can collaborate with health care professionals and simulationists-experts in the design and implementation of simulation-to use contemporary simulation to improve health care delivery. The need-and the opportunity-to apply human factors expertise in efforts to achieve improved health outcomes has never been greater. Health care is a complex adaptive system, and simulation is an effective and flexible tool that can be used by human factors experts to better understand and improve individual, team, and system performance within health care. Expert opinion is presented, based on a panel delivered during the 2014 Human Factors and Ergonomics Society Health Care Symposium. Diverse simulators, physically or virtually representing humans or human organs, and simulation applications in education, research, and systems analysis that may be of use to human factors experts are presented. Examples of simulation designed to improve individual, team, and system performance are provided, as are applications in computational modeling, research, and lifelong learning. The adoption or adaptation of current and future training and assessment simulation technologies and facilities provides opportunities for human factors research and engineering, with benefits for health care safety, quality, resilience, and efficiency. Human factors experts, health care providers, and simulationists can use contemporary simulation equipment and techniques to study and improve health care delivery. © 2016, Human Factors and Ergonomics Society.

Initial Implementation Indicators From a Statewide Rollout of SafeCare Within a Child Welfare System

PubMed Central

Whitaker, Daniel J.; Ryan, Kerry A.; Wild, Robert C.; Self-Brown, Shannon; Lutzker, John R.; Shanley, Jenelle R.; Edwards, Anna M.; McFry, Erin A.; Moseley, Colby N.; Hodges, Amanda E.

2013-01-01

There is a strong movement toward implementation of evidence-based practices (EBP) in child welfare systems. The SafeCare parenting model is one of few parent-training models that addresses child neglect, the most common form of maltreatment. Here, the authors describe initial findings from a statewide effort to implement the EBP, SafeCare®, into a state child welfare system. A total of 50 agencies participated in training, with 295 individuals entering training to implement SafeCare. Analyses were conducted to describe the trainee sample, describe initial training and implementation indicators, and to examine correlates of initial training performance and implementation indicators. The quality of SafeCare uptake during training and implementation was high with trainees performing very well on training quizzes and role-plays, and demonstrating high fidelity when implementing SafeCare in the field (performing over 90% of expected behaviors). However, the quantity of implementation was generally low, with relatively few providers (only about 25%) implementing the model following workshop training. There were no significant predictors of training or implementation performance, once corrections for multiple comparisons were applied. The Discussion focuses on challenges to large-scale system-wide implementation of EBP. PMID:22146860

Measuring movement towards improved emergency obstetric care in rural Kenya with implementation of the PRONTO simulation and team training program.

PubMed

Dettinger, Julia C; Kamau, Stephen; Calkins, Kimberly; Cohen, Susanna R; Cranmer, John; Kibore, Minnie; Gachuno, Onesmus; Walker, Dilys

2018-02-01

As the proportion of facility-based births increases, so does the need to ensure that mothers and their newborns receive quality care. Developing facility-oriented obstetric and neonatal training programs grounded in principles of teamwork utilizing simulation-based training for emergency response is an important strategy for improving the quality care. This study uses 3 dimensions of the Kirkpatrick Model to measure the impact of PRONTO International (PRONTO) simulation-based training as part of the Linda Afya ya Mama na Mtoto (LAMMP, Protect the Health of mother and child) in Kenya. Changes in knowledge of obstetric and neonatal emergency response, self-efficacy, and teamwork were analyzed using longitudinal, fixed-effects, linear regression models. Participants from 26 facilities participated in the training between 2013 and 2014. The results demonstrate improvements in knowledge, self-efficacy, and teamwork self-assessment. When comparing pre-Module I scores with post-training scores, improvements range from 9 to 24 percentage points (p values < .0001 to .026). Compared to baseline, post-Module I and post-Module II (3 months later) scores in these domains were similar. The intervention not only improved participant teamwork skills, obstetric and neonatal knowledge, and self-efficacy but also fostered sustained changes at 3 months. The proportion of facilities achieving self-defined strategic goals was high: 95.8% of the 192 strategic goals. Participants rated the PRONTO intervention as extremely useful, with an overall score of 1.4 out of 5 (1, extremely useful; 5, not at all useful). Evaluation of how these improvements affect maternal and perinatal clinical outcomes is forthcoming. © 2018 John Wiley & Sons Ltd.

Transfer of training and simulator qualification or myth and folklore in helicopter simulation

NASA Technical Reports Server (NTRS)

Dohme, Jack

1992-01-01

Transfer of training studies at Fort Rucker using the backward-transfer paradigm have shown that existing flight simulators are not entirely adequate for meeting training requirements. Using an ab initio training research simulator, a simulation of the UH-1, training effectiveness ratios were developed. The data demonstrate it to be a cost-effective primary trainer. A simulator qualification method was suggested in which a combination of these transfer-of-training paradigms is used to determine overall simulator fidelity and training effectiveness.

Can virtual reality be used to conduct mass prophylaxis clinic training? A pilot program.

PubMed

Yellowlees, Peter; Cook, James N; Marks, Shayna L; Wolfe, Daniel; Mangin, Elanor

2008-03-01

To create and evaluate a pilot bioterrorism defense training environment using virtual reality technology. The present pilot project used Second Life, an internet-based virtual world system, to construct a virtual reality environment to mimic an actual setting that might be used as a Strategic National Stockpile (SNS) distribution site for northern California in the event of a bioterrorist attack. Scripted characters were integrated into the system as mock patients to analyze various clinic workflow scenarios. Users tested the virtual environment over two sessions. Thirteen users who toured the environment were asked to complete an evaluation survey. Respondents reported that the virtual reality system was relevant to their practice and had potential as a method of bioterrorism defense training. Computer simulations of bioterrorism defense training scenarios are feasible with existing personal computer technology. The use of internet-connected virtual environments holds promise for bioterrorism defense training. Recommendations are made for public health agencies regarding the implementation and benefits of using virtual reality for mass prophylaxis clinic training.

Faculty Development for Small-Group-Teaching with Simulated Patients (SP) - Design and Evaluation of a Competency-based Workshop.

PubMed

Hölzer, Henrike; Freytag, Julia; Sonntag, Ulrike

2017-01-01

Objective: The introduction of innovative teaching formats and methods in medical education requires a specific didactic training for teachers to use complicated formats effectively. This paper describes preliminary considerations, design, implementation and evaluation of a skills-based workshop (7,5 hours long) for teaching with simulated patients. The aim is to describe the essential components for a lasting effect of the workshop so that the concept can be adapted to other contexts. Method: We present the theoretical framework, the objectives, the didactic methodology and the implementation of the workshop. The evaluation of the workshop was carried out using questionnaires. First the participants (teachers of the faculty of medicine, clinical and science subjects) were asked to estimate how well they felt prepared for small group teaching immediately after workshop. Later, after some teaching experience of their own, they gave feedback again as a part of the general evaluation of the semester. Results: In the course of three years 27 trainings were conducted and evaluated with a total of 275 participants. In the context of semester evaluation 452 questionnaires were evaluated on the quality of training. Conclusion: The evaluation shows that participants appreciate the concept of the workshop and also feel sufficiently well prepared. As a limitation it must be said that this is so far only the lecturers' self-assessment. Nevertheless, it can be stated that even a one-day workshop with a stringent teaching concept shows long term results regarding innovative teaching methods.

Implementation of a Sustainable Training System for Emergency in Vietnam.

PubMed

Kang, Sunjoo; Seo, Hyejin; Ho, Binh Duy; Nguyen, Phuong Thi Anh

2018-01-01

This study analyzed the project outcomes to share lessons regarding the development of an emergency medicine education system in Vietnam. Retrospective evaluation was implemented using project outcome indicators. A total of 13 training courses were administered, with the collaboration of international experts in Korea and Vietnam. A total of 23 kinds of emergency medicine education equipment were purchased, and a basic life support (BLS) and two advanced cardiac life support labs were remodeled to provide appropriate simulation training. Throughout the 2 years of the project, nine Vietnamese BLS instructors were approved by the Korea Association of Cardiopulmonary Resuscitation under American Heart Association. Results of evaluation by Korean international development experts were based on five criteria, provided by the Development Assistance Committee of the Organization for Economic Co-operation and Development, were excellent. Success factors were identified as partnership, ownership, commitment, government support, and global networking. Project indicators were all accomplished and received an excellent evaluation by external experts. For sustainable success, healthcare policy and legal regulation to promote high quality and safe service to the Vietnamese people are recommended.

Laparoscopic skills acquisition: a study of simulation and traditional training.

PubMed

Marlow, Nicholas; Altree, Meryl; Babidge, Wendy; Field, John; Hewett, Peter; Maddern, Guy J

2014-12-01

Training in basic laparoscopic skills can be undertaken using traditional methods, where trainees are educated by experienced surgeons through a process of graduated responsibility or by simulation-based training. This study aimed to assess whether simulation trained individuals reach the same level of proficiency in basic laparoscopic skills as traditional trained participants when assessed in a simulated environment. A prospective study was undertaken. Participants were allocated to one of two cohorts according to surgical experience. Participants from the inexperienced cohort were randomized to receive training in basic laparoscopic skills on either a box trainer or a virtual reality simulator. They were then assessed on the simulator on which they did not receive training. Participants from the experienced cohort, considered to have received traditional training in basic laparoscopic skills, did not receive simulation training and were randomized to either the box trainer or virtual reality simulator for skills assessment. The assessment scores from different cohorts on either simulator were then compared. A total of 138 participants completed the assessment session, 101 in the inexperienced simulation-trained cohort and 37 on the experienced traditionally trained cohort. There was no statistically significant difference between the training outcomes of simulation and traditionally trained participants, irrespective of the simulator type used. The results demonstrated that participants trained on either a box trainer or virtual reality simulator achieved a level of basic laparoscopic skills assessed in a simulated environment that was not significantly different from participants who had been traditionally trained in basic laparoscopic skills. © 2013 Royal Australasian College of Surgeons.

Interactive simulator for e-Learning environments: a teaching software for health care professionals.

PubMed

De Lazzari, Claudio; Genuini, Igino; Pisanelli, Domenico M; D'Ambrosi, Alessandra; Fedele, Francesco

2014-12-18

There is an established tradition of cardiovascular simulation tools, but the application of this kind of technology in the e-Learning arena is a novel approach. This paper presents an e-Learning environment aimed at teaching the interaction of cardiovascular and lung systems to health-care professionals. Heart-lung interaction must be analyzed while assisting patients with severe respiratory problems or with heart failure in intensive care unit. Such patients can be assisted by mechanical ventilatory assistance or by thoracic artificial lung."In silico" cardiovascular simulator was experimented during a training course given to graduate students of the School of Specialization in Cardiology at 'Sapienza' University in Rome.The training course employed CARDIOSIM©: a numerical simulator of the cardiovascular system. Such simulator is able to reproduce pathophysiological conditions of patients affected by cardiovascular and/or lung disease. In order to study the interactions among the cardiovascular system, the natural lung and the thoracic artificial lung (TAL), the numerical model of this device has been implemented. After having reproduced a patient's pathological condition, TAL model was applied in parallel and hybrid model during the training course.Results obtained during the training course show that TAL parallel assistance reduces right ventricular end systolic (diastolic) volume, but increases left ventricular end systolic (diastolic) volume. The percentage changes induced by hybrid TAL assistance on haemodynamic variables are lower than those produced by parallel assistance. Only in the case of the mean pulmonary arterial pressure, there is a percentage reduction which, in case of hybrid assistance, is greater (about 40%) than in case of parallel assistance (20-30%).At the end of the course, a short questionnaire was submitted to students in order to assess the quality of the course. The feedback obtained was positive, showing good results with respect to the degree of students' learning and the ease of use of the software simulator.

A Qualitative Study to Evaluate the Effectiveness of Simulation as a Training Method in Implementation of Electronic Medical Records

ERIC Educational Resources Information Center

Chelton, Barbara S.

2009-01-01

Background: Adoption of electronic medical records has been gradual in part due to physician concerns that its use in the exam room will interfere with the physician-patient relationship. Studies demonstrate their concern to be loss of eye contact with the patient and that entering information into the computer in the presence of the patient will…

Air Support Control Officer Individual Position Training Simulation

DTIC Science & Technology

2017-06-01

Analysis design development implementation evaluation ASCO Air support control officer ASLT Air support liaison team ASNO Air support net operator...Instructional system design LSTM Long-short term memory MACCS Marine Air Command and Control System MAGTF Marine Air Ground Task Force MASS Marine Air...information to designated MACCS agencies. ASCOs play an important part in facilitating the safe and successful conduct of air operations in DASC- controlled

Learning Curves of Virtual Mastoidectomy in Distributed and Massed Practice.

PubMed

Andersen, Steven Arild Wuyts; Konge, Lars; Cayé-Thomasen, Per; Sørensen, Mads Sølvsten

2015-10-01

Repeated and deliberate practice is crucial in surgical skills training, and virtual reality (VR) simulation can provide self-directed training of basic surgical skills to meet the individual needs of the trainee. Assessment of the learning curves of surgical procedures is pivotal in understanding skills acquisition and best-practice implementation and organization of training. To explore the learning curves of VR simulation training of mastoidectomy and the effects of different practice sequences with the aim of proposing the optimal organization of training. A prospective trial with a 2 × 2 design was conducted at an academic teaching hospital. Participants included 43 novice medical students. Of these, 21 students completed time-distributed practice from October 14 to November 29, 2013, and a separate group of 19 students completed massed practice on May 16, 17, or 18, 2014. Data analysis was performed from June 6, 2014, to March 3, 2015. Participants performed 12 repeated virtual mastoidectomies using a temporal bone surgical simulator in either a distributed (practice blocks spaced in time) or massed (all practice in 1 day) training program with randomization for simulator-integrated tutoring during the first 5 sessions. Performance was assessed using a modified Welling Scale for final product analysis by 2 blinded senior otologists. Compared with the 19 students in the massed practice group, the 21 students in the distributed practice group were older (mean age, 25.1 years), more often male (15 [62%]), and had slightly higher mean gaming frequency (2.3 on a 1-5 Likert scale). Learning curves were established and distributed practice was found to be superior to massed practice, reported as mean end score (95% CI) of 15.7 (14.4-17.0) in distributed practice vs. 13.0 (11.9-14.1) with massed practice (P = .002). Simulator-integrated tutoring accelerated the initial performance, with mean score for tutored sessions of 14.6 (13.9-15.2) vs. 13.4 (12.8-14.0) for corresponding nontutored sessions (P < .01) but at the cost of a drop in performance once tutoring ceased. The performance drop was less with distributed practice, suggesting a protective effect when acquired skills were consolidated over time. The mean performance of the nontutored participants in the distributed practice group plateaued on a score of 16.0 (15.3-16.7) at approximately the ninth repetition, but the individual learning curves were highly variable. Novices can acquire basic mastoidectomy competencies with self-directed VR simulation training. Training should be organized with distributed practice, and simulator-integrated tutoring can be useful to accelerate the initial learning curve. Practice should be deliberate and toward a standard set level of proficiency that remains to be defined rather than toward the mean learning curve plateau.

Technology and medicine: the evolution of virtual reality simulation in laparoscopic training.

PubMed

Bashir, Gareth

2010-01-01

Virtual reality (VR) simulation for laparoscopic surgical training is now a reality. There is increasing evidence that the use of VR simulation is a powerful adjunct to traditional surgical apprenticeship in the current climate of reduced time spent in training. This article reviews the early evidence supporting the case for VR simulation training in laparoscopic surgery. A standard literature search was conducted using the following phrases--'virtual reality in surgical training', 'surgical training', 'laparoscopic training' and 'simulation in surgical training'. This article outlines the early evidence which supports the use of VR simulation in laparoscopic training and the need for further research into this new training technique.

Development of a Haptic Interface for Natural Orifice Translumenal Endoscopic Surgery Simulation

PubMed Central

Dargar, Saurabh; Sankaranarayanan, Ganesh

2016-01-01

Natural orifice translumenal endoscopic surgery (NOTES) is a minimally invasive procedure, which utilizes the body’s natural orifices to gain access to the peritoneal cavity. The NOTES procedure is designed to minimize external scarring and patient trauma, however flexible endoscopy based pure NOTES procedures require critical scope handling skills. The delicate nature of the NOTES procedure requires extensive training, thus to improve access to training while reducing risk to patients we have designed and developed the VTEST©, a virtual reality NOTES simulator. As part of the simulator, a novel decoupled 2-DOF haptic device was developed to provide realistic force feedback to the user in training. A series of experiments were performed to determine the behavioral characteristics of the device. The device was found capable of rendering up to 5.62N and 0.190Nm of continuous force and torque in the translational and rotational DOF, respectively. The device possesses 18.1Hz and 5.7Hz of force bandwidth in the translational and rotational DOF, respectively. A feedforward friction compensator was also successfully implemented to minimize the negative impact of friction during the interaction with the device. In this work we have presented the detailed development and evaluation of the haptic device for the VTEST©. PMID:27008674

Computer-assisted learning and simulation systems in dentistry--a challenge to society.

PubMed

Welk, A; Splieth, Ch; Wierinck, E; Gilpatrick, R O; Meyer, G

2006-07-01

Computer technology is increasingly used in practical training at universities. However, in spite of their potential, computer-assisted learning (CAL) and computer-assisted simulation (CAS) systems still appear to be underutilized in dental education. Advantages, challenges, problems, and solutions of computer-assisted learning and simulation in dentistry are discussed by means of MEDLINE, open Internet platform searches, and key results of a study among German dental schools. The advantages of computer-assisted learning are seen for example in self-paced and self-directed learning and increased motivation. It is useful for both objective theoretical and practical tests and for training students to handle complex cases. CAL can lead to more structured learning and can support training in evidence-based decision-making. The reasons for the still relatively rare implementation of CAL/CAS systems in dental education include an inability to finance, lack of studies of CAL/CAS, and too much effort required to integrate CAL/CAS systems into the curriculum. To overcome the reasons for the relative low degree of computer technology use, we should strive for multicenter research and development projects monitored by the appropriate national and international scientific societies, so that the potential of computer technology can be fully realized in graduate, postgraduate, and continuing dental education.

Learning communication from erroneous video-based examples: A double-blind randomised controlled trial.

PubMed

Schmitz, Felix Michael; Schnabel, Kai Philipp; Stricker, Daniel; Fischer, Martin Rudolf; Guttormsen, Sissel

2017-06-01

Appropriate training strategies are required to equip undergraduate healthcare students to benefit from communication training with simulated patients. This study examines the learning effects of different formats of video-based worked examples on initial communication skills. First-year nursing students (N=36) were randomly assigned to one of two experimental groups (correct v. erroneous examples) or to the control group (no examples). All the groups were provided an identical introduction to learning materials on breaking bad news; the experimental groups also received a set of video-based worked examples. Each example was accompanied by a self-explanation prompt (considering the example's correctness) and elaborated feedback (the true explanation). Participants presented with erroneous examples broke bad news to a simulated patient significantly more appropriately than students in the control group. Additionally, they tended to outperform participants who had correct examples, while participants presented with correct examples tended to outperform the control group. The worked example effect was successfully adapted for learning in the provider-patient communication domain. Implementing video-based worked examples with self-explanation prompts and feedback can be an effective strategy to prepare students for their training with simulated patients, especially when examples are erroneous. Copyright © 2017 Elsevier B.V. All rights reserved.

Is it possible to improve radiotherapy team members' communication skills? A randomized study assessing the efficacy of a 38-h communication skills training program.

PubMed

Gibon, Anne-Sophie; Merckaert, Isabelle; Liénard, Aurore; Libert, Yves; Delvaux, Nicole; Marchal, Serge; Etienne, Anne-Marie; Reynaert, Christine; Slachmuylder, Jean-Louis; Scalliet, Pierre; Van Houtte, Paul; Coucke, Philippe; Salamon, Emile; Razavi, Darius

2013-10-01

Optimizing communication between radiotherapy team members and patients and between colleagues requires training. This study applies a randomized controlled design to assess the efficacy of a 38-h communication skills training program. Four radiotherapy teams were randomly assigned either to a training program or to a waiting list. Team members' communication skills and their self-efficacy to communicate in the context of an encounter with a simulated patient were the primary endpoints. These encounters were scheduled at the baseline and after training for the training group, and at the baseline and four months later for the waiting list group. Encounters were audiotaped and transcribed. Transcripts were analyzed with content analysis software (LaComm) and by an independent rater. Eighty team members were included in the study. Compared to untrained team members, trained team members used more turns of speech with content oriented toward available resources in the team (relative rate [RR]=1.38; p=0.023), more assessment utterances (RR=1.69; p<0.001), more empathy (RR=4.05; p=0.037), more negotiation (RR=2.34; p=0.021) and more emotional words (RR=1.32; p=0.030), and their self-efficacy to communicate increased (p=0.024 and p=0.008, respectively). The training program was effective in improving team members' communication skills and their self-efficacy to communicate in the context of an encounter with a simulated patient. Future study should assess the effect of this training program on communication with actual patients and their satisfaction. Moreover a cost-benefit analysis is needed, before implementing such an intensive training program on a broader scale. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Quantum annealing versus classical machine learning applied to a simplified computational biology problem

PubMed Central

Li, Richard Y.; Di Felice, Rosa; Rohs, Remo; Lidar, Daniel A.

2018-01-01

Transcription factors regulate gene expression, but how these proteins recognize and specifically bind to their DNA targets is still debated. Machine learning models are effective means to reveal interaction mechanisms. Here we studied the ability of a quantum machine learning approach to predict binding specificity. Using simplified datasets of a small number of DNA sequences derived from actual binding affinity experiments, we trained a commercially available quantum annealer to classify and rank transcription factor binding. The results were compared to state-of-the-art classical approaches for the same simplified datasets, including simulated annealing, simulated quantum annealing, multiple linear regression, LASSO, and extreme gradient boosting. Despite technological limitations, we find a slight advantage in classification performance and nearly equal ranking performance using the quantum annealer for these fairly small training data sets. Thus, we propose that quantum annealing might be an effective method to implement machine learning for certain computational biology problems. PMID:29652405

An Overview of NASA's Program of Future M&S VV&A Outreach and Training Activities

NASA Technical Reports Server (NTRS)

Caine, Lisa; Hale, Joseph P.

2006-01-01

NASA's Exploration Systems Mission Directorate (ESMD) is implementing a management approach for modeling and simulation (M&S) that will provide decision-makers information on the model s fidelity, credibility, and quality. The Integrated Modeling & Simulation Verification, Validation and Accreditation (IM&S W&A) process will allow the decision-maker to understand the risks involved in using a model s results for mission-critical decisions. The W&A Technical Working Group (W&A TWG) has been identified to communicate this process throughout the agency. As the W&A experts, the W&A NVG will be the central resource for support of W&A policy, procedures, training and templates for documentation. This presentation will discuss the W&A Technical Working Group s outreach approach aimed at educating M&S program managers, developers, users and proponents on the W&A process, beginning at MSFC with the CLV program.

Virtually Out of This World!

NASA Technical Reports Server (NTRS)

2002-01-01

Ames Research Center granted Reality Capture Technologies (RCT), Inc., a license to further develop NASA's Mars Map software platform. The company incorporated NASA#s innovation into software that uses the Virtual Plant Model (VPM)(TM) to structure, modify, and implement the construction sites of industrial facilities, as well as develop, validate, and train operators on procedures. The VPM orchestrates the exchange of information between engineering, production, and business transaction systems. This enables users to simulate, control, and optimize work processes while increasing the reliability of critical business decisions. Engineers can complete the construction process and test various aspects of it in virtual reality before building the actual structure. With virtual access to and simulation of the construction site, project personnel can manage, access control, and respond to changes on complex constructions more effectively. Engineers can also create operating procedures, training, and documentation. Virtual Plant Model(TM) is a trademark of Reality Capture Technologies, Inc.

Tube thoracostomy training with a medical simulator is associated with faster, more successful performance of the procedure

PubMed Central

Chung, Tae Nyoung; Kim, Sun Wook; You, Je Sung; Chung, Hyun Soo

2016-01-01

Objective Tube thoracostomy (TT) is a commonly performed intensive care procedure. Simulator training may be a good alternative method for TT training, compared with conventional methods such as apprenticeship and animal skills laboratory. However, there is insufficient evidence supporting use of a simulator. The aim of this study is to determine whether training with medical simulator is associated with faster TT process, compared to conventional training without simulator. Methods This is a simulation study. Eligible participants were emergency medicine residents with very few (≤3 times) TT experience. Participants were randomized to two groups: the conventional training group, and the simulator training group. While the simulator training group used the simulator to train TT, the conventional training group watched the instructor performing TT on a cadaver. After training, all participants performed a TT on a cadaver. The performance quality was measured as correct placement and time delay. Subjects were graded if they had difficulty on process. Results Estimated median procedure time was 228 seconds in the conventional training group and 75 seconds in the simulator training group, with statistical significance (P=0.040). The difficulty grading did not show any significant difference among groups (overall performance scale, 2 vs. 3; P=0.094). Conclusion Tube thoracostomy training with a medical simulator, when compared to no simulator training, is associated with a significantly faster procedure, when performed on a human cadaver. PMID:27752610

Using an operator training simulator in the undergraduate chemical engineering curriculim

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bhattacharyya, D.; Turton, R.; Zitney, S.

2012-01-01

An operator training simulator (OTS) is to the chemical engineer what a flight simulator is to the aerospace engineer. The basis of an OTS is a high-fidelity dynamic model of a chemical process that allows an engineer to simulate start-up, shut-down, and normal operation. It can also be used to test the skill and ability of an engineer or operator to respond and control some unforeseen situation(s) through the use of programmed malfunctions. West Virginia University (WVU) is a member of the National Energy Technology Laboratory’s Regional University Alliance (NETL-RUA). Working through the NETL-RUA, the authors have spent the lastmore » four years collaborating on the development of a high-fidelity OTS for an Integrated Gasification Combined Cycle (IGCC) power plant with CO{sub 2} capture that is the cornerstone of the AVESTARTM (Advanced Virtual Energy Simulation Training And Research) Center with sister facilities at NETL and WVU in Morgantown, WV. This OTS is capable of real-time dynamic simulation of IGCC plant operation, including start-up, shut-down, and power demand load following. The dynamic simulator and its human machine interfaces (HMIs) are based on the DYNSIM and InTouch software, respectively, from Invensys Operations Management. The purpose of this presentation is to discuss the authors’ experiences in using this sophisticated dynamic simulation-based OTS as a hands-on teaching tool in the undergraduate chemical engineering curriculum. At present, the OTS has been used in two separate courses: a new process simulation course and a traditional process control course. In the process simulation course, concepts of steady-state and dynamic simulations were covered prior to exposing the students to the OTS. Moreover, digital logic and the concept of equipment requiring one or more permissive states to be enabled prior to successful operation were also covered. Students were briefed about start-up procedures and the importance of following a predetermined sequence of actions in order to start-up the plant successfully. Student experience with the dynamic simulator consisted of a six-hour training session in which the Claus sulfur capture unit of the IGCC plant was started up. The students were able to operate the simulator through the InTouch-based HMI displays and study and understand the underlying dynamic modeling approach used in the DYNSIM-based simulator. The concepts learned during the training sessions were further reinforced when students developed their own DYNSIM models for a chemical process and wrote a detailed start-up procedure. In the process control course, students learned how the plant responds dynamically to changes in the manipulated inputs, as well as how the control system impacts plant performance, stability, robustness and disturbance rejection characteristics. The OTS provided the opportunity to study the dynamics of complicated, “real-life” process plants consisting of hundreds of pieces of equipment. Students implemented ideal forcing functions, tracked the time-delay through the entire plant, studied the response of open-loop unstable systems, and learned “good practices” in control system design by taking into account the real-world events where significant deviations from the “ideal” or “expected” response can occur. The theory of closed-loop stability was reinforced by implementing limiting proportional gain for stability limits of real plants. Finally, students were divided into several groups where each group was tasked to control a section of the plant within a set of operating limits in the face of disturbances and simulated process faults. At the end of this test, they suggested ways to improve the control system performance based on the theory they learned in class and the hands-on experience they earned while working on the OTS.« less

Electric train energy consumption modeling

DOE PAGES

Wang, Jinghui; Rakha, Hesham A.

2017-05-01

For this paper we develop an electric train energy consumption modeling framework considering instantaneous regenerative braking efficiency in support of a rail simulation system. The model is calibrated with data from Portland, Oregon using an unconstrained non-linear optimization procedure, and validated using data from Chicago, Illinois by comparing model predictions against the National Transit Database (NTD) estimates. The results demonstrate that regenerative braking efficiency varies as an exponential function of the deceleration level, rather than an average constant as assumed in previous studies. The model predictions are demonstrated to be consistent with the NTD estimates, producing a predicted error ofmore » 1.87% and -2.31%. The paper demonstrates that energy recovery reduces the overall power consumption by 20% for the tested Chicago route. Furthermore, the paper demonstrates that the proposed modeling approach is able to capture energy consumption differences associated with train, route and operational parameters, and thus is applicable for project-level analysis. The model can be easily implemented in traffic simulation software, used in smartphone applications and eco-transit programs given its fast execution time and easy integration in complex frameworks.« less

Electric train energy consumption modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Jinghui; Rakha, Hesham A.

For this paper we develop an electric train energy consumption modeling framework considering instantaneous regenerative braking efficiency in support of a rail simulation system. The model is calibrated with data from Portland, Oregon using an unconstrained non-linear optimization procedure, and validated using data from Chicago, Illinois by comparing model predictions against the National Transit Database (NTD) estimates. The results demonstrate that regenerative braking efficiency varies as an exponential function of the deceleration level, rather than an average constant as assumed in previous studies. The model predictions are demonstrated to be consistent with the NTD estimates, producing a predicted error ofmore » 1.87% and -2.31%. The paper demonstrates that energy recovery reduces the overall power consumption by 20% for the tested Chicago route. Furthermore, the paper demonstrates that the proposed modeling approach is able to capture energy consumption differences associated with train, route and operational parameters, and thus is applicable for project-level analysis. The model can be easily implemented in traffic simulation software, used in smartphone applications and eco-transit programs given its fast execution time and easy integration in complex frameworks.« less

Maglev Train Signal Processing Architecture Based on Nonlinear Discrete Tracking Differentiator.

PubMed

Wang, Zhiqiang; Li, Xiaolong; Xie, Yunde; Long, Zhiqiang

2018-05-24

In a maglev train levitation system, signal processing plays an important role for the reason that some sensor signals are prone to be corrupted by noise due to the harsh installation and operation environment of sensors and some signals cannot be acquired directly via sensors. Based on these concerns, an architecture based on a new type of nonlinear second-order discrete tracking differentiator is proposed. The function of this signal processing architecture includes filtering signal noise and acquiring needed signals for levitation purposes. The proposed tracking differentiator possesses the advantages of quick convergence, no fluttering, and simple calculation. Tracking differentiator's frequency characteristics at different parameter values are studied in this paper. The performance of this new type of tracking differentiator is tested in a MATLAB simulation and this tracking-differentiator is implemented in Very-High-Speed Integrated Circuit Hardware Description Language (VHDL). In the end, experiments are conducted separately on a test board and a maglev train model. Simulation and experiment results show that the performance of this novel signal processing architecture can fulfill the real system requirement.

Design, development, and evaluation of an online virtual emergency department for training trauma teams.

PubMed

Youngblood, Patricia; Harter, Phillip M; Srivastava, Sakti; Moffett, Shannon; Heinrichs, Wm LeRoy; Dev, Parvati

2008-01-01

Training interdisciplinary trauma teams to work effectively together using simulation technology has led to a reduction in medical errors in emergency department, operating room, and delivery room contexts. High-fidelity patient simulators (PSs)-the predominant method for training healthcare teams-are expensive to develop and implement and require that trainees be present in the same place at the same time. In contrast, online computer-based simulators are more cost effective and allow simultaneous participation by students in different locations and time zones. In this pilot study, the researchers created an online virtual emergency department (Virtual ED) for team training in crisis management, and compared the effectiveness of the Virtual ED with the PS. We hypothesized that there would be no difference in learning outcomes for graduating medical students trained with each method. In this pilot study, we used a pretest-posttest control group, experimental design in which 30 subjects were randomly assigned to either the Virtual ED or the PS system. In the Virtual ED each subject logged into the online environment and took the role of a team member. Four-person teams worked together in the Virtual ED, communicating in real time with live voice over Internet protocol, to manage computer-controlled patients who exhibited signs and symptoms of physical trauma. Each subject had the opportunity to be the team leader. The subjects' leadership behavior as demonstrated in both a pretest case and a posttest case was assessed by 3 raters, using a behaviorally anchored scale. In the PS environment, 4-person teams followed the same research protocol, using the same clinical scenarios in a Simulation Center. Guided by the Emergency Medicine Crisis Resource Management curriculum, both the Virtual ED and the PS groups applied the basic principles of team leadership and trauma management (Advanced Trauma Life Support) to manage 6 trauma cases-a pretest case, 4 training cases, and a posttest case. The subjects in each group were assessed individually with the same simulation method that they used for the training cases. Subjects who used either the Virtual ED or the PS showed significant improvement in performance between pretest and posttest cases (P < 0.05). In addition, there was no significant difference in subjects' performance between the 2 types of simulation, suggesting that the online Virtual ED may be as effective for learning team skills as the PS, the method widely used in Simulation Centers. Data on usability and attitudes toward both simulation methods as learning tools were equally positive. This study shows the potential value of using virtual learning environments for developing medical students' and resident physicians' team leadership and crisis management skills.

Web-based training on weapons of mass destruction response for emergency medical services personnel.

PubMed

Gershon, Robyn R M; Canton, Allison N; Magda, Lori A; DiMaggio, Charles; Gonzalez, Dario; Dul, Mitchell W

2009-01-01

To develop, implement, and assess a web-based simulation training program for emergency medical services (EMS) personnel on recognition and treatment of ocular injuries resulting from weapons of mass destruction (WMD) attacks. The training program consisted of six modules: WMD knowledge and event detection, ocular anatomy, ocular first aid (ie, flushing, cupping, and patching), and three WMD simulations (ie, sarin gas release, anthrax release, and radioactive dispersal device). Pretest, post-test, and 1-month follow-up test and a program evaluation were used to measure knowledge gain and retention and to assess the effectiveness of the program. New York State EMS. Four hundred and sixty-four individuals participated in the training program and all waves of the testing (86 percent retention rate). The effectiveness of the training intervention was measured using pretest and post-test questionnaires and analyzed using dependent t-tests. Assessment scores for overall knowledge increased from the pretest (mean = 15.7, standard deviation [SD] = 2.1) to the post-test (mean = 17.8, SD = 1.3), p < 0.001, and from pretest (mean = 15.7, SD = 2.1) to 1-month follow-up test (mean = 16.6, SD = 2.0), p < 0.001. Ninety-two percent of respondents indicated that the program reinforced understanding of WMDs. This training method provides an effective and low-cost approach to educate and evaluate EMS personnel on emergency treatment of eye trauma associated with the use of WMD. Online training should also be supplemented with hands-on practice and refresher trainings.

The Effectiveness of Remote Facilitation in Simulation-Based Pediatric Resuscitation Training for Medical Students.

PubMed

Ohta, Kunio; Kurosawa, Hiroshi; Shiima, Yuko; Ikeyama, Takanari; Scott, James; Hayes, Scott; Gould, Michael; Buchanan, Newton; Nadkarni, Vinay; Nishisaki, Akira

2017-08-01

To assess the effectiveness of pediatric simulation by remote facilitation. We hypothesized that simulation by remote facilitation is more effective compared to simulation by an on-site facilitator. We defined remote facilitation as a facilitator remotely (1) introduces simulation-based learning and simulation environment, (2) runs scenarios, and (3) performs debriefing with an on-site facilitator. A remote simulation program for medical students during pediatric rotation was implemented. Groups were allocated to either remote or on-site facilitation depending on the availability of telemedicine technology. Both groups had identical 1-hour simulation sessions with 2 scenarios and debriefing. Their team performance was assessed with behavioral assessment tool by a trained rater. Perception by students was evaluated with Likert scale (1-7). Fifteen groups with 89 students participated in a simulation by remote facilitation, and 8 groups with 47 students participated in a simulation by on-site facilitation. Participant demographics and previous simulation experience were similar. Both groups improved their performance from first to second scenario: groups by remote simulation (first [8.5 ± 4.2] vs second [13.2 ± 6.2], P = 0.003), and groups by on-site simulation (first [6.9 ± 4.1] vs second [12.4 ± 6.4], P = 0.056). The performance improvement was not significantly different between the 2 groups (P = 0.94). Faculty evaluation by students was equally high in both groups (7 vs 7; P = 0.65). A pediatric acute care simulation by remote facilitation significantly improved students' performance. In this pilot study, remote facilitation seems as effective as a traditional, locally facilitated simulation. The remote simulation can be a strong alternative method, especially where experienced facilitators are limited.

Competency-based learning in an ambulatory care setting: Implementation of simulation training in the Ambulatory Care Rotation during the final year of the MaReCuM model curriculum.

PubMed

Dusch, Martin; Narciß, Elisabeth; Strohmer, Renate; Schüttpelz-Brauns, Katrin

2018-01-01

Aim: As part of the MaReCuM model curriculum at Medical Faculty Mannheim Heidelberg University, a final year rotation in ambulatory care was implemented and augmented to include ambulatory care simulation. In this paper we describe this ambulatory care simulation, the designated competency-based learning objectives, and evaluate the educational effect of the ambulatory care simulation training. Method: Seventy-five final year medical students participated in the survey (response rate: 83%). The control group completed the ambulatory rotation prior to the implementation of the ambulatory care simulation. The experimental group was required to participate in the simulation at the beginning of the final year rotation in ambulatory care. A survey of both groups was conducted at the beginning and at the end of the rotation. The learning objectives were taken from the National Competency-based Catalogue of Learning Objectives for Undergraduate Medical Education (NKLM). Results: The ambulatory care simulation had no measurable influence on students' subjectively perceived learning progress, the evaluation of the ambulatory care rotation, or working in an ambulatory care setting. At the end of the rotation participants in both groups reported having gained better insight into treating outpatients. At the beginning of the rotation members of both groups assessed their competencies to be at the same level. The simulated ambulatory scenarios were evaluated by the participating students as being well structured and easy to understand. The scenarios successfully created a sense of time pressure for those confronted with them. The ability to correctly fill out a narcotic prescription form as required was rated significantly higher by those who participated in the simulation. Participation in the ambulatory care simulation had no effect on the other competencies covered by the survey. Discussion: The effect of the four instructional units comprising the ambulatory care simulation was not measurable due to the current form or the measurement point at the end of the 12-week rotation. The reasons for this could be the many and statistically elusive factors relevant to the individual and the wide variety among final year rotation placements, the late point in time of the final survey, and the selection of simulated scenarios. The course is slated to undergo specific further development and should be supplemented with additional learning opportunities to ensure that the main learning objectives are covered. The description of the teaching format is meant to contribute to the ongoing development of medical education with an emphasis on competency in the areas of ambulatory care, communication, prevention and health promotion.

Towards an interactive electromechanical model of the heart

PubMed Central

Talbot, Hugo; Marchesseau, Stéphanie; Duriez, Christian; Sermesant, Maxime; Cotin, Stéphane; Delingette, Hervé

2013-01-01

In this work, we develop an interactive framework for rehearsal of and training in cardiac catheter ablation, and for planning cardiac resynchronization therapy. To this end, an interactive and real-time electrophysiology model of the heart is developed to fit patient-specific data. The proposed interactive framework relies on two main contributions. First, an efficient implementation of cardiac electrophysiology is proposed, using the latest graphics processing unit computing techniques. Second, a mechanical simulation is then coupled to the electrophysiological signals to produce realistic motion of the heart. We demonstrate that pathological mechanical and electrophysiological behaviour can be simulated. PMID:24427533

Simulation-based educational curriculum for fluoroscopically guided lumbar puncture improves operator confidence and reduces patient dose.

PubMed

Faulkner, Austin R; Bourgeois, Austin C; Bradley, Yong C; Hudson, Kathleen B; Heidel, R Eric; Pasciak, Alexander S

2015-05-01

Fluoroscopically guided lumbar puncture (FGLP) is a commonly performed procedure with increased success rates relative to bedside technique. However, FGLP also exposes both patient and staff to ionizing radiation. The purpose of this study was to determine if the use of a simulation-based FGLP training program using an original, inexpensive lumbar spine phantom could improve operator confidence and efficiency, while also reducing patient dose. A didactic and simulation-based FGLP curriculum was designed, including a 1-hour lecture and hands-on training with a lumbar spine phantom prototype developed at our institution. Six incoming post-graduate year 2 (PGY-2) radiology residents completed a short survey before taking the course, and each resident practiced 20 simulated FGLPs using the phantom before their first clinical procedure. Data from the 114 lumbar punctures (LPs) performed by the six trained residents (prospective cohort) were compared to data from 514 LPs performed by 17 residents who did not receive simulation-based training (retrospective cohort). Fluoroscopy time (FT), FGLP success rate, and indication were compared. There was a statistically significant reduction in average FT for the 114 procedures performed by the prospective study cohort compared to the 514 procedures performed by the retrospective cohort. This held true for all procedures in aggregate, LPs for myelography, and all procedures performed for a diagnostic indication. Aggregate FT for the prospective group (0.87 ± 0.68 minutes) was significantly lower compared to the retrospective group (1.09 ± 0.65 minutes) and resulted in a 25% reduction in average FT (P = .002). There was no statistically significant difference in the number of failed FGLPs between the two groups. Our simulation-based FGLP curriculum resulted in improved operator confidence and reduced FT. These changes suggest that resident procedure efficiency was improved, whereas patient dose was reduced. The FGLP training program was implemented by radiology residents and required a minimal investment of time and resources. The LP spine phantom used during training was inexpensive, durable, and effective. In addition, the phantom is compatible with multiple modalities including fluoroscopy, computed tomography, and ultrasound and could be easily adapted to other applications such as facet injections or joint arthrograms. Copyright © 2015 AUR. Published by Elsevier Inc. All rights reserved.

The effect of self-directed virtual reality simulation on dissection training performance in mastoidectomy.

PubMed

Andersen, Steven Arild Wuyts; Foghsgaard, Søren; Konge, Lars; Cayé-Thomasen, Per; Sørensen, Mads Sølvsten

2016-08-01

To establish the effect of self-directed virtual reality (VR) simulation training on cadaveric dissection training performance in mastoidectomy and the transferability of skills acquired in VR simulation training to the cadaveric dissection training setting. Prospective study. Two cohorts of 20 novice otorhinolaryngology residents received either self-directed VR simulation training before cadaveric dissection training or vice versa. Cadaveric and VR simulation performances were assessed using final-product analysis with three blinded expert raters. The group receiving VR simulation training before cadaveric dissection had a mean final-product score of 14.9 (95 % confidence interval [CI] [12.9-16.9]) compared with 9.8 (95% CI [8.4-11.1]) in the group not receiving VR simulation training before cadaveric dissection. This 52% increase in performance was statistically significantly (P < 0.0001). A single dissection mastoidectomy did not increase VR simulation performance (P = 0.22). Two hours of self-directed VR simulation training was effective in increasing cadaveric dissection mastoidectomy performance and suggests that mastoidectomy skills are transferable from VR simulation to the traditional dissection setting. Virtual reality simulation training can therefore be employed to optimize training, and can spare the use of donated material and instructional resources for more advanced training after basic competencies have been acquired in the VR simulation environment. NA. Laryngoscope, 126:1883-1888, 2016. © 2015 The American Laryngological, Rhinological and Otological Society, Inc.

14 CFR 121.409 - Training courses using airplane simulators and other training devices.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Training courses using airplane simulators... Program § 121.409 Training courses using airplane simulators and other training devices. (a) Training courses utilizing airplane simulators and other training devices may be included in the certificate holder...

14 CFR 121.409 - Training courses using airplane simulators and other training devices.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Training courses using airplane simulators... Program § 121.409 Training courses using airplane simulators and other training devices. (a) Training courses utilizing airplane simulators and other training devices may be included in the certificate holder...

14 CFR 121.409 - Training courses using airplane simulators and other training devices.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Training courses using airplane simulators... Program § 121.409 Training courses using airplane simulators and other training devices. (a) Training courses utilizing airplane simulators and other training devices may be included in the certificate holder...

14 CFR 121.409 - Training courses using airplane simulators and other training devices.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Training courses using airplane simulators... Program § 121.409 Training courses using airplane simulators and other training devices. (a) Training courses utilizing airplane simulators and other training devices may be included in the certificate holder...

Simulation Modeling Requirements for Loss-of-Control Accident Prevention of Turboprop Transport Aircraft

NASA Technical Reports Server (NTRS)

Crider, Dennis; Foster, John V.

2012-01-01

In-flight loss of control remains the leading contributor to aviation accident fatalities, with stall upsets being the leading causal factor. The February 12, 2009. Colgan Air, Inc., Continental Express flight 3407 accident outside Buffalo, New York, brought this issue to the forefront of public consciousness and resulted in recommendations from the National Transportation Safety Board to conduct training that incorporates stalls that are fully developed and develop simulator standards to support such training. In 2010, Congress responded to this accident with Public Law 11-216 (Section 208), which mandates full stall training for Part 121 flight operations. Efforts are currently in progress to develop recommendations on implementation of stall training for airline pilots. The International Committee on Aviation Training in Extended Envelopes (ICATEE) is currently defining simulator fidelity standards that will be necessary for effective stall training. These recommendations will apply to all civil transport aircraft including straight-wing turboprop aircraft. Government-funded research over the previous decade provides a strong foundation for stall/post-stall simulation for swept-wing, conventional tail jets to respond to this mandate, but turboprops present additional and unique modeling challenges. First among these challenges is the effect of power, which can provide enhanced flow attachment behind the propellers. Furthermore, turboprops tend to operate for longer periods in an environment more susceptible to ice. As a result, there have been a significant number of turboprop accidents as a result of the early (lower angle of attack) stalls in icing. The vulnerability of turboprop configurations to icing has led to studies on ice accumulation and the resulting effects on flight behavior. Piloted simulations of these effects have highlighted the important training needs for recognition and mitigation of icing effects, including the reduction of stall margins. This paper addresses simulation modeling requirements that are unique to turboprop transport aircraft and highlights the growing need for aerodynamic models suitable for stall training for these configurations. A review of prominent accidents that involved aerodynamic stall is used to illustrate various modeling features unique to turboprop configurations and the impact of stall behavior on susceptibility to loss of control that has led to new training requirements. This is followed by an overview of stability and control behavior of straight-wing turboprops, the related aerodynamic characteristics, and a summary of recent experimental studies on icing effects. In addition, differences in flight dynamics behavior between swept-wing jets and straight-wing turboprop configurations are discussed to compare and contrast modeling requirements. Specific recommendations for aerodynamic models along with further research needs and data measurements are also provided. 1

Boot cAMP: educational outcomes after 4 successive years of preparatory simulation-based training at onset of internship.

PubMed

Fernandez, Gladys L; Page, David W; Coe, Nicholas P; Lee, Patrick C; Patterson, Lisa A; Skylizard, Loki; St Louis, Myron; Amaral, Marisa H; Wait, Richard B; Seymour, Neal E

2012-01-01

Preparatory training for new trainees beginning residency has been used by a variety of programs across the country. To improve the clinical orientation process for our new postgraduate year (PGY)-1 residents, we developed an intensive preparatory training curriculum inclusive of cognitive and procedural skills, training activities considered essential for early PGY-1 clinical management. We define our surgical PGY-1 Boot Camp as preparatory simulation-based training implemented at the onset of internship for introduction of skills necessary for basic surgical patient problem assessment and management. This orientation process includes exposure to simulated patient care encounters and technical skills training essential to new resident education. We report educational results of 4 successive years of Boot Camp training. Results were analyzed to determine if performance evidenced at onset of training was predictive of later educational outcomes. Learners were PGY-1 residents, in both categorical and preliminary positions, at our medium-sized surgical residency program. Over a 4-year period, from July 2007 to July 2010, all 30 PGY-1 residents starting surgical residency at our institution underwent specific preparatory didactic and skills training over a 9-week period. This consisted of mandatory weekly 1-hour and 3-hour sessions in the Simulation Center, representing a 4-fold increase in time in simulation laboratory training compared with the remainder of the year. Training occurred in 8 procedural skills areas (instrument use, knot-tying, suturing, laparoscopic skills, airway management, cardiopulmonary resuscitation, central venous catheter, and chest tube insertion) and in simulated patient care (shock, surgical emergencies, and respiratory, cardiac, and trauma management) using a variety of high- and low-tech simulation platforms. Faculty and senior residents served as instructors. All educational activities were structured to include preparatory materials, pretraining briefing sessions, and immediate in-training or post-training review and debriefing. Baseline cognitive skills were assessed with written tests on basic patient management. Post-Boot Camp tests similarly evaluated cognitive skills. Technical skills were assessed using a variety of task-specific instruments, and expressed as a mean score for all activities for each resident. All measurements were expressed as percent (%) best possible score. Cognitive and technical performance in Boot Camp was compared with subsequent clinical and core curriculum evaluations including weekly quiz scores, annual American Board of Surgery In-Training Examination (ABSITE) scores, program in-training evaluations (New Innovations, Uniontown, Ohio), and operative assessment instrument scores (OP-Rate, Baystate Medical Center, Springfield, Massachusetts) for the remainder of the PGY-1 year. Performance data were available for 30 PGY-1 residents over 4 years. Baseline cognitive skills were lower for the first year of Boot Camp as compared with subsequent years (71 ± 13, 83 ± 9, 84 ± 11, and 86 ± 6, respectively; p = 0.028, analysis of variance; ANOVA). Performance improved between pretests and final testing (81 ± 11 vs 89 ± 7; p < 0.001 paired t test). There was statistically significant correlation between Boot Camp final cognitive test results and American Board of Surgery In-Training Examination scores (p = 0.01; n = 22), but not quite significant for weekly curriculum quiz scores (p = 0.055; n = 22) and New Innovations cognitive assessments (p = 0.09; n = 25). Statistically significant correlation was also noted between Boot Camp mean overall skills and New Innovations technical skills assessments (p = 0.002; n = 25) and OP-Rate assessments (p = 0.01; n = 12). Individual simulation-based Boot Camp performance scores for cognitive and procedural skills assessments in PGY-1 residents correlate with subjective and objective clinical performance evaluations. This concurrent correlation with multiple traditional evaluation methods used to express competency in our residency program supports the use of Boot Camp performance measures as needs assessment tools as well as adjuncts to cumulative resident evaluation data. Copyright © 2012 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

A randomized, controlled trial of in situ pediatric advanced life support recertification ("pediatric advanced life support reconstructed") compared with standard pediatric advanced life support recertification for ICU frontline providers*.

PubMed

Kurosawa, Hiroshi; Ikeyama, Takanari; Achuff, Patricia; Perkel, Madeline; Watson, Christine; Monachino, Annemarie; Remy, Daphne; Deutsch, Ellen; Buchanan, Newton; Anderson, Jodee; Berg, Robert A; Nadkarni, Vinay M; Nishisaki, Akira

2014-03-01

Recent evidence shows poor retention of Pediatric Advanced Life Support provider skills. Frequent refresher training and in situ simulation are promising interventions. We developed a "Pediatric Advanced Life Support-reconstructed" recertification course by deconstructing the training into six 30-minute in situ simulation scenario sessions delivered over 6 months. We hypothesized that in situ Pediatric Advanced Life Support-reconstructed implementation is feasible and as effective as standard Pediatric Advanced Life Support recertification. A prospective randomized, single-blinded trial. Single-center, large, tertiary PICU in a university-affiliated children's hospital. Nurses and respiratory therapists in PICU. Simulation-based modular Pediatric Advanced Life Support recertification training. Simulation-based pre- and postassessment sessions were conducted to evaluate participants' performance. Video-recorded sessions were rated by trained raters blinded to allocation. The primary outcome was skill performance measured by a validated Clinical Performance Tool, and secondary outcome was behavioral performance measured by a Behavioral Assessment Tool. A mixed-effect model was used to account for baseline differences. Forty participants were prospectively randomized to Pediatric Advanced Life Support reconstructed versus standard Pediatric Advanced Life Support with no significant difference in demographics. Clinical Performance Tool score was similar at baseline in both groups and improved after Pediatric Advanced Life Support reconstructed (pre, 16.3 ± 4.1 vs post, 22.4 ± 3.9; p < 0.001), but not after standard Pediatric Advanced Life Support (pre, 14.3 ± 4.7 vs post, 14.9 ± 4.4; p =0.59). Improvement of Clinical Performance Tool was significantly higher in Pediatric Advanced Life Support reconstructed compared with standard Pediatric Advanced Life Support (p = 0.006). Behavioral Assessment Tool improved in both groups: Pediatric Advanced Life Support reconstructed (pre, 33.3 ± 4.5 vs post, 35.9 ± 5.0; p = 0.008) and standard Pediatric Advanced Life Support (pre, 30.5 ± 4.7 vs post, 33.6 ± 4.9; p = 0.02), with no significant difference of improvement between both groups (p = 0.49). For PICU-based nurses and respiratory therapists, simulation-based "Pediatric Advanced Life Support-reconstructed" in situ training is feasible and more effective than standard Pediatric Advanced Life Support recertification training for skill performance. Both Pediatric Advanced Life Support recertification training courses improved behavioral performance.

[Full-scale simulation in German medical schools and anesthesia residency programs : Status quo].

PubMed

Baschnegger, H; Meyer, O; Zech, A; Urban, B; Rall, M; Breuer, G; Prückner, S

2017-01-01

Simulation has been increasingly used in medicine. In 2003 German university departments of anesthesiology were provided with a full-scale patient simulator, designated for use with medical students. Meanwhile simulation courses are also offered to physicians and nurses. Currently, the national model curriculum for residency programs in anesthesiology is being revised, possibly to include mandatory simulation training. To assess the status quo of full-scale simulation training for medical school, residency and continuing medical education in German anesthesiology. All 38 German university chairs for anesthesiology as well as five arbitrarily chosen non-university facilities were invited to complete an online questionnaire regarding their centers' infrastructure and courses held between 2010 and 2012. The overall return rate was 86 %. In university simulation centers seven non-student staff members, mainly physicians, were involved, adding up to a full-time equivalent of 1.2. All hours of work were paid by 61 % of the centers. The median center size was 100 m 2 (range 20-500 m 2 ), equipped with three patient simulators (1-32). Simulators of high or very high fidelity are available at 80 % of the centers. Scripted scenarios were used by 91 %, video debriefing by 69 %. Of the participating university centers, 97 % offered courses for medical students, 81 % for the department's employees, 43 % for other departments of their hospital, and 61 % for external participants. In 2012 the median center reached 46 % of eligible students (0-100), 39 % of the department's physicians (8-96) and 16 % of its nurses (0-56) once. For physicians and nurses from these departments that equals one simulation-based training every 2.6 and 6 years, respectively. 31 % made simulation training mandatory for their residents, 29 % for their nurses and 24 % for their attending physicians. The overall rates of staff ever exposed to simulation were 45 % of residents (8-90), and 30 % each of nurses (10-80) and attendings (0-100). Including external courses the average center trained 59 (4-271) professionals overall in 2012. No clear trend could be observed over the three years polled. The results for the non-university centers were comparable. Important first steps have been taken to implement full-scale simulation in Germany. In addition to programs for medical students courses for physicians and nurses are available today. To reach everyone clinically involved in German anesthesiology on a regular basis the current capacities need to be dramatically increased. The basis for that to happen will be new concepts for funding, possibly supported by external requirements such as the national model curriculum for residency in anesthesiology.

The effect of motor imagery with specific implement in expert badminton player.

PubMed

Wang, Z; Wang, S; Shi, F-Y; Guan, Y; Wu, Y; Zhang, L-L; Shen, C; Zeng, Y-W; Wang, D-H; Zhang, J

2014-09-05

Motor skill can be improved with mental simulation. Implements are widely used in daily life and in various sports. However, it is unclear whether the utilization of implements enhances the effect of mental simulation. The present study was designed to investigate the different effects of motor imagery in athletes and novices when they handled a specific implement. We hypothesize that athletes have better motor imagery ability than novices when they hold a specific implement for the sport. This is manifested as higher motor cortical excitability in athletes than novices during motor imagery with the specific implement. Sixteen expert badminton players and 16 novices were compared when they held a specific implement such as a badminton racket and a non-specific implement such as a a plastic bar. Motor imagery ability was measured with a self-evaluation questionnaire. Transcranial magnetic stimulation was used to test the motor cortical excitability during motor imagery. Motor-evoked potentials (MEPs) in the first dorsal interosseous (FDI) and extensor carpi radialis muscles were recorded. Athletes reported better motor imagery than novices when they held a specific implement. Athletes exhibited more MEP facilitation than novices in the FDI muscle with the specific implement applied during motor imagery. The MEP facilitation is correlated with motor imagery ability in athletes. We conclude that the effects of motor imagery with a specific implement are enhanced in athletes compared to novices and the difference between two groups is caused by long-term physical training of athletes with the specific implement. Copyright © 2014 IBRO. Published by Elsevier Ltd. All rights reserved.

"See One, Sim One, Do One"- A National Pre-Internship Boot-Camp to Ensure a Safer "Student to Doctor" Transition.

PubMed

Minha, Sa'ar; Shefet, Daphna; Sagi, Doron; Berkenstadt, Haim; Ziv, Amitai

2016-01-01

The transition for being a medical student to a full functioning intern is accompanied by considerable stress and sense of unpreparedness. Simulation based workshops were previously reported to be effective in improving the readiness of interns and residents to their daily needed skills but only few programs were implemented on a large scale. A nationally endorsed and mandated pre-internship simulation based workshop is reported. We hypothesized that this intervention will have a meaningful and sustained impact on trainees' perception of their readiness to internship with regard to patient safety and quality of care skills. Main outcome measure was the workshop's contribution to professional training in general and to critical skills and error prevention in particular, as perceived by participants. Between 2004 and 2011, 85 workshops were conducted for a total of 4,172 trainees. Eight-hundred and six of the 2,700 participants approached by e-mail, returned feedback evaluation forms, which were analyzed. Eighty five percent of trainees perceived the workshop as an essential component of their professional training, and 87% agreed it should be mandatory. These ratings peaked during internship and were generally sustained 3 years following the workshop. Contribution to emergency care skills was especially highly ranked (83%). Implementation of a mandatory, simulation-based, pre-internship workshop on a national scale made a significant perceived impact on interns and residents. The sustained impact should encourage adopting this approach to facilitate the student to doctor transition.

Instructor feedback versus no instructor feedback on performance in a laparoscopic virtual reality simulator: a randomized trial.

PubMed

Strandbygaard, Jeanett; Bjerrum, Flemming; Maagaard, Mathilde; Winkel, Per; Larsen, Christian Rifbjerg; Ringsted, Charlotte; Gluud, Christian; Grantcharov, Teodor; Ottesen, Bent; Sorensen, Jette Led

2013-05-01

To investigate the impact of instructor feedback versus no instructor feedback when training a complex operational task on a laparoscopic virtual reality simulator. : Simulators are now widely accepted as a training tool, but there is insufficient knowledge about how much feedback is necessary, which is useful for sustainable implementation. A randomized trial complying with CONSORT Statement. All participants had to reach a predefined proficiency level for a complex operational task on a virtual reality simulator. The intervention group received standardized instructor feedback a maximum of 3 times. The control group did not receive instructor feedback. Participants were senior medical students without prior laparoscopic experience (n = 99). Outcome measures were time, repetitions, and performance score to reach a predefined proficiency level. Furthermore, influence of sex and perception of own surgical skills were examined. Time (in minutes) and repetitions were reduced in the intervention group (162 vs 342 minutes; P < 0.005) and (29 vs 65 repetitions; P < 0.005). The control group achieved a higher performance score than the intervention group (57% vs 49%; P = 0.004). Men used less time (in minutes) than women (P = 0.037), but no sex difference was observed for repetitions (P = 0.20). Participants in the intervention group had higher self-perception regarding surgical skills after the trial (P = 0.011). Instructor feedback increases the efficiency when training a complex operational task on a virtual reality simulator; time and repetitions used to achieve a predefined proficiency level were significantly reduced in the group that received instructor feedback compared with the control group. NCT01497782.

Simulation Use for Global Away Rotations (SUGAR): preparing residents for emotional challenges abroad--a multicenter study.

PubMed

Butteris, Sabrina M; Gladding, Sophia P; Eppich, Walter; Hagen, Scott A; Pitt, Michael B

2014-01-01

Preparation for residents participating in global health (GH) experiences is critical. Active preparatory curricula allowing residents to experience and debrief emotional challenges they may encounter abroad are generally lacking. We sought to evaluate a novel simulation curriculum designed to prepare residents for emotions they may experience in response to challenges abroad. Pediatric GH educators from 7 institutions developed case vignettes incorporating common challenges residents experience abroad. Residents participating in a GH training track or planning to participate in a GH rotation from the 7 institutions were eligible to participate in the simulation curriculum. Participants and trained facilitators completed postsimulation evaluations that were analyzed using descriptive statistics and thematic analysis of written comments to assess the utility of the curriculum, emotions evoked, and changes residents anticipated making to their GH rotation preparation. Fifty-one residents and 16 facilitators completed 160 and 52 evaluations, respectively. Overall, respondents found the simulations useful (mean [SD] resident score 4.49 [0.82] and facilitator score 4.85 [0.36] on a 5-point scale [1 = completely useless, 5 = very useful]). Residents reported strong emotions in 153 (98%) of 156 comments. After the sessions, 131 (96%) of 137 comments reflected anticipated changes to GH rotation preparation plans. Active preparation for GH rotations using simulated cases appears to be a useful tool that can be implemented across a variety of sites with minimal facilitator training or simulation experience. The curriculum successfully elicited powerful emotions in residents and provided an opportunity to debrief these experiences before encountering them abroad. Copyright © 2014 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

Virtual reality simulators and training in laparoscopic surgery.

PubMed

Yiannakopoulou, Eugenia; Nikiteas, Nikolaos; Perrea, Despina; Tsigris, Christos

2015-01-01

Virtual reality simulators provide basic skills training without supervision in a controlled environment, free of pressure of operating on patients. Skills obtained through virtual reality simulation training can be transferred on the operating room. However, relative evidence is limited with data available only for basic surgical skills and for laparoscopic cholecystectomy. No data exist on the effect of virtual reality simulation on performance on advanced surgical procedures. Evidence suggests that performance on virtual reality simulators reliably distinguishes experienced from novice surgeons Limited available data suggest that independent approach on virtual reality simulation training is not different from proctored approach. The effect of virtual reality simulators training on acquisition of basic surgical skills does not seem to be different from the effect the physical simulators. Limited data exist on the effect of virtual reality simulation training on the acquisition of visual spatial perception and stress coping skills. Undoubtedly, virtual reality simulation training provides an alternative means of improving performance in laparoscopic surgery. However, future research efforts should focus on the effect of virtual reality simulation on performance in the context of advanced surgical procedure, on standardization of training, on the possibility of synergistic effect of virtual reality simulation training combined with mental training, on personalized training. Copyright © 2014 Surgical Associates Ltd. Published by Elsevier Ltd. All rights reserved.

Simulation-Based Training Platforms for Arthroscopy: A Randomized Comparison of Virtual Reality Learning to Benchtop Learning.

PubMed

Middleton, Robert M; Alvand, Abtin; Garfjeld Roberts, Patrick; Hargrove, Caroline; Kirby, Georgina; Rees, Jonathan L

2017-05-01

To determine whether a virtual reality (VR) arthroscopy simulator or benchtop (BT) arthroscopy simulator showed superiority as a training tool. Arthroscopic novices were randomized to a training program on a BT or a VR knee arthroscopy simulator. The VR simulator provided user performance feedback. Individuals performed a diagnostic arthroscopy on both simulators before and after the training program. Performance was assessed using wireless objective motion analysis and a global rating scale. The groups (8 in the VR group, 9 in the BT group) were well matched at baseline across all parameters (P > .05). Training on each simulator resulted in significant performance improvements across all parameters (P < .05). BT training conferred a significant improvement in all parameters when trainees were reassessed on the VR simulator (P < .05). In contrast, VR training did not confer improvement in performance when trainees were reassessed on the BT simulator (P > .05). BT-trained subjects outperformed VR-trained subjects in all parameters during final assessments on the BT simulator (P < .05). There was no difference in objective performance between VR-trained and BT-trained subjects on final VR simulator wireless objective motion analysis assessment (P > .05). Both simulators delivered improvements in arthroscopic skills. BT training led to skills that readily transferred to the VR simulator. Skills acquired after VR training did not transfer as readily to the BT simulator. Despite trainees receiving automated metric feedback from the VR simulator, the results suggest a greater gain in psychomotor skills for BT training. Further work is required to determine if this finding persists in the operating room. This study suggests that there are differences in skills acquired on different simulators and skills learnt on some simulators may be more transferable. Further work in identifying user feedback metrics that enhance learning is also required. Copyright © 2016 Arthroscopy Association of North America. All rights reserved.

[Integrated Peer Teaching of Communication and Clinical Skills: How to Train Student Tutors?].

PubMed

Ringel, Nadja; Bürmann, Barbara Maatouk; Fellmer-Drueg, Erika; Roos, Marco; Herzog, Wolfgang; Nikendei, Christoph; Wischmann, Tewes; Weiss, Carmen; Eicher, Christiane; Engeser, Peter; Schultz, Jobst-Hendrik; Jünger, Jana

2015-08-01

This paper describes the theory-based development of a standardized training model for peer tutors. The aim is to qualify tutors to teach communication skills integrated with practical clinical skills, to medical students in the pre-clinical curriculum. As a result, students are encouraged to form a basic understanding of the biopsychosocial model of diseases early in their studies. The training model's design is based on the Kern model for curriculum development as adapted by McLean et al., who outlined the following steps: planning, implementation, and evaluation/feedback. Our focus is on development, review of feasibility, and evaluation as measured by the subjectively perceived effectiveness of the implemented training model. 2 target groups were considered: the peer tutors and the student tutees. In 2009, a 3-step training model consisting of 12 units was developed, based on the theory of patient-centered communication and the biopsychosocial model. The training was rated very positively on a 5-point Likert scale by all tutors at 2 points in time: t1 (directly after training) and t2 (after conducting 2 tutorials) (t1: M=1.67; SD=±0.86; t2: M=1.75; SD=±0.71). On a 6-point Likert scale, the tutees also evaluated their communication and clinical skills as being significantly better after completing the 10 tutorials (t2: scale for interaction and communication: M=4.81; SD: 1.09; scale for clinical examination: M=4.99; SD: 0.85) than before the tutorials (t0: scale for communication and interaction: M=3.18; SD=1.15; scale for clinical examination: M=2.88; SD: 1.09). By implementing a standardized tutor training model, one can qualify peer tutors to teach communication skills integrated with practical clinical skills during the pre-clinical phase. Practice teaching of the curricular material via role playing, tutorial simulation and an extensive feedback session, along with the definition of clinical standards for recording case histories and performing examinations, have proven themselves to be core elements of effective tutor training. © Georg Thieme Verlag KG Stuttgart · New York.

Models and Methods for Adaptive Management of Individual and Team-Based Training Using a Simulator

NASA Astrophysics Data System (ADS)

Lisitsyna, L. S.; Smetyuh, N. P.; Golikov, S. P.

2017-05-01

Research of adaptive individual and team-based training has been analyzed and helped find out that both in Russia and abroad, individual and team-based training and retraining of AASTM operators usually includes: production training, training of general computer and office equipment skills, simulator training including virtual simulators which use computers to simulate real-world manufacturing situation, and, as a rule, the evaluation of AASTM operators’ knowledge determined by completeness and adequacy of their actions under the simulated conditions. Such approach to training and re-training of AASTM operators stipulates only technical training of operators and testing their knowledge based on assessing their actions in a simulated environment.

Current status of robotic simulators in acquisition of robotic surgical skills.

PubMed

Kumar, Anup; Smith, Roger; Patel, Vipul R

2015-03-01

This article provides an overview of the current status of simulator systems in robotic surgery training curriculum, focusing on available simulators for training, their comparison, new technologies introduced in simulation focusing on concepts of training along with existing challenges and future perspectives of simulator training in robotic surgery. The different virtual reality simulators available in the market like dVSS, dVT, RoSS, ProMIS and SEP have shown face, content and construct validity in robotic skills training for novices outside the operating room. Recently, augmented reality simulators like HoST, Maestro AR and RobotiX Mentor have been introduced in robotic training providing a more realistic operating environment, emphasizing more on procedure-specific robotic training . Further, the Xperience Team Trainer, which provides training to console surgeon and bed-side assistant simultaneously, has been recently introduced to emphasize the importance of teamwork and proper coordination. Simulator training holds an important place in current robotic training curriculum of future robotic surgeons. There is a need for more procedure-specific augmented reality simulator training, utilizing advancements in computing and graphical capabilities for new innovations in simulator technology. Further studies are required to establish its cost-benefit ratio along with concurrent and predictive validity.

Powered wheelchair simulator development: implementing combined navigation-reaching tasks with a 3D hand motion controller.

PubMed

Tao, Gordon; Archambault, Philippe S

2016-01-19

Powered wheelchair (PW) training involving combined navigation and reaching is often limited or unfeasible. Virtual reality (VR) simulators offer a feasible alternative for rehabilitation training either at home or in a clinical setting. This study evaluated a low-cost magnetic-based hand motion controller as an interface for reaching tasks within the McGill Immersive Wheelchair (miWe) simulator. Twelve experienced PW users performed three navigation-reaching tasks in the real world (RW) and in VR: working at a desk, using an elevator, and opening a door. The sense of presence in VR was assessed using the iGroup Presence Questionnaire (IPQ). We determined concordance of task performance in VR with that in the RW. A video task analysis was performed to analyse task behaviours. Compared to previous miWe data, IPQ scores were greater in the involvement domain (p < 0.05). Task analysis showed most of navigation and reaching behaviours as having moderate to excellent (K > 0.4, Cohen's Kappa) agreement between the two environments, but greater (p < 0.05) risk of collisions and reaching errors in VR. VR performance demonstrated longer (p < 0.05) task times and more discreet movements for the elevator and desk tasks but not the door task. Task performance showed poorer kinematic performance in VR than RW but similar strategies. Therefore, the reaching component represents a promising addition to the miWe training simulator, though some limitations must be addressed in future development.

Virtual reality simulation in neurosurgery: technologies and evolution.

PubMed

Chan, Sonny; Conti, François; Salisbury, Kenneth; Blevins, Nikolas H

2013-01-01

Neurosurgeons are faced with the challenge of learning, planning, and performing increasingly complex surgical procedures in which there is little room for error. With improvements in computational power and advances in visual and haptic display technologies, virtual surgical environments can now offer potential benefits for surgical training, planning, and rehearsal in a safe, simulated setting. This article introduces the various classes of surgical simulators and their respective purposes through a brief survey of representative simulation systems in the context of neurosurgery. Many technical challenges currently limit the application of virtual surgical environments. Although we cannot yet expect a digital patient to be indistinguishable from reality, new developments in computational methods and related technology bring us closer every day. We recognize that the design and implementation of an immersive virtual reality surgical simulator require expert knowledge from many disciplines. This article highlights a selection of recent developments in research areas related to virtual reality simulation, including anatomic modeling, computer graphics and visualization, haptics, and physics simulation, and discusses their implication for the simulation of neurosurgery.

A systematic review of surgical skills transfer after simulation-based training: laparoscopic cholecystectomy and endoscopy.

PubMed

Dawe, Susan R; Windsor, John A; Broeders, Joris A J L; Cregan, Patrick C; Hewett, Peter J; Maddern, Guy J

2014-02-01

A systematic review to determine whether skills acquired through simulation-based training transfer to the operating room for the procedures of laparoscopic cholecystectomy and endoscopy. Simulation-based training assumes that skills are directly transferable to the operation room, but only a few studies have investigated the effect of simulation-based training on surgical performance. A systematic search strategy that was used in 2006 was updated to retrieve relevant studies. Inclusion of articles was determined using a predetermined protocol, independent assessment by 2 reviewers, and a final consensus decision. Seventeen randomized controlled trials and 3 nonrandomized comparative studies were included in this review. In most cases, simulation-based training was in addition to patient-based training programs. Only 2 studies directly compared simulation-based training in isolation with patient-based training. For laparoscopic cholecystectomy (n = 10 studies) and endoscopy (n = 10 studies), participants who reached simulation-based skills proficiency before undergoing patient-based assessment performed with higher global assessment scores and fewer errors in the operating room than their counterparts who did not receive simulation training. Not all parameters measured were improved. Two of the endoscopic studies compared simulation-based training in isolation with patient-based training with different results: for sigmoidoscopy, patient-based training was more effective, whereas for colonoscopy, simulation-based training was equally effective. Skills acquired by simulation-based training seem to be transferable to the operative setting for laparoscopic cholecystectomy and endoscopy. Future research will strengthen these conclusions by evaluating predetermined competency levels on the same simulators and using objective validated global rating scales to measure operative performance.

Implementation and evaluation of a simulation curriculum for paediatric residency programs including just-in-time in situ mock codes.

PubMed

Sam, Jonathan; Pierse, Michael; Al-Qahtani, Abdullah; Cheng, Adam

2012-02-01

To develop, implement and evaluate a simulation-based acute care curriculum in a paediatric residency program using an integrated and longitudinal approach. Curriculum framework consisting of three modular, year-specific courses and longitudinal just-in-time, in situ mock codes. Paediatric residency program at BC Children's Hospital, Vancouver, British Columbia. The three year-specific courses focused on the critical first 5 min, complex medical management and crisis resource management, respectively. The just-in-time in situ mock codes simulated the acute deterioration of an existing ward patient, prepared the actual multidisciplinary code team, and primed the surrounding crisis support systems. Each curriculum component was evaluated with surveys using a five-point Likert scale. A total of 40 resident surveys were completed after each of the modular courses, and an additional 28 surveys were completed for the overall simulation curriculum. The highest Likert scores were for hands-on skill stations, immersive simulation environment and crisis resource management teaching. Survey results also suggested that just-in-time mock codes were realistic, reinforced learning, and prepared ward teams for patient deterioration. A simulation-based acute care curriculum was successfully integrated into a paediatric residency program. It provides a model for integrating simulation-based learning into other training programs, as well as a model for any hospital that wishes to improve paediatric resuscitation outcomes using just-in-time in situ mock codes.

14 CFR 121.409 - Training courses using airplane simulators and other training devices.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Training courses using airplane simulators... Program § 121.409 Training courses using airplane simulators and other training devices. Link to an amendment published at 78 FR 67837, Nov. 12, 2013. (a) Training courses utilizing airplane simulators and...

A prototype percutaneous transhepatic cholangiography training simulator with real-time breathing motion.

PubMed

Villard, P F; Vidal, F P; Hunt, C; Bello, F; John, N W; Johnson, S; Gould, D A

2009-11-01

We present here a simulator for interventional radiology focusing on percutaneous transhepatic cholangiography (PTC). This procedure consists of inserting a needle into the biliary tree using fluoroscopy for guidance. The requirements of the simulator have been driven by a task analysis. The three main components have been identified: the respiration, the real-time X-ray display (fluoroscopy) and the haptic rendering (sense of touch). The framework for modelling the respiratory motion is based on kinematics laws and on the Chainmail algorithm. The fluoroscopic simulation is performed on the graphic card and makes use of the Beer-Lambert law to compute the X-ray attenuation. Finally, the haptic rendering is integrated to the virtual environment and takes into account the soft-tissue reaction force feedback and maintenance of the initial direction of the needle during the insertion. Five training scenarios have been created using patient-specific data. Each of these provides the user with variable breathing behaviour, fluoroscopic display tuneable to any device parameters and needle force feedback. A detailed task analysis has been used to design and build the PTC simulator described in this paper. The simulator includes real-time respiratory motion with two independent parameters (rib kinematics and diaphragm action), on-line fluoroscopy implemented on the Graphics Processing Unit and haptic feedback to feel the soft-tissue behaviour of the organs during the needle insertion.

Effects of 3D Virtual Simulators in the Introductory Wind Energy Course: A Tool for Teaching Engineering Concepts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Do, Phuong T.; Moreland, John R.; Delgado, Catherine

Our research provides an innovative solution for optimizing learning effectiveness and improving postsecondary education through the development of virtual simulators that can be easily used and integrated into existing wind energy curriculum. Two 3D virtual simulators are developed in our laboratory for use in an immersive 3D virtual reality (VR) system or for 3D display on a 2D screen. Our goal is to apply these prototypical simulators to train postsecondary students and professionals in wind energy education; and to offer experiential learning opportunities in 3D modeling, simulation, and visualization. The issue of transferring learned concepts to practical applications is amore » widespread problem in postsecondary education. Related to this issue is a critical demand to educate and train a generation of professionals for the wind energy industry. With initiatives such as the U.S. Department of Energy's “20% Wind Energy by 2030” outlining an exponential increase of wind energy capacity over the coming years, revolutionary educational reform is needed to meet the demand for education in the field of wind energy. These developments and implementation of Virtual Simulators and accompanying curriculum will propel national reforms, meeting the needs of the wind energy industrial movement and addressing broader educational issues that affect a number of disciplines.« less

Effects of 3D Virtual Simulators in the Introductory Wind Energy Course: A Tool for Teaching Engineering Concepts

DOE PAGES

Do, Phuong T.; Moreland, John R.; Delgado, Catherine; ...

2013-01-01

Our research provides an innovative solution for optimizing learning effectiveness and improving postsecondary education through the development of virtual simulators that can be easily used and integrated into existing wind energy curriculum. Two 3D virtual simulators are developed in our laboratory for use in an immersive 3D virtual reality (VR) system or for 3D display on a 2D screen. Our goal is to apply these prototypical simulators to train postsecondary students and professionals in wind energy education; and to offer experiential learning opportunities in 3D modeling, simulation, and visualization. The issue of transferring learned concepts to practical applications is amore » widespread problem in postsecondary education. Related to this issue is a critical demand to educate and train a generation of professionals for the wind energy industry. With initiatives such as the U.S. Department of Energy's “20% Wind Energy by 2030” outlining an exponential increase of wind energy capacity over the coming years, revolutionary educational reform is needed to meet the demand for education in the field of wind energy. These developments and implementation of Virtual Simulators and accompanying curriculum will propel national reforms, meeting the needs of the wind energy industrial movement and addressing broader educational issues that affect a number of disciplines.« less

Automatic Data Processing Equipment (ADPE) acquisition plan for the medical sciences

NASA Technical Reports Server (NTRS)

1979-01-01

An effective mechanism for meeting the SLSD/MSD data handling/processing requirements for Shuttle is discussed. The ability to meet these requirements depends upon the availability of a general purpose high speed digital computer system. This system is expected to implement those data base management and processing functions required across all SLSD/MSD programs during training, laboratory operations/analysis, simulations, mission operations, and post mission analysis/reporting.

Changing learning with new interactive and media-rich instruction environments: virtual labs case study report.

PubMed

Huang, Camillan

2003-01-01

Technology has created a new dimension for visual teaching and learning with web-delivered interactive media. The Virtual Labs Project has embraced this technology with instructional design and evaluation methodologies behind the simPHYSIO suite of simulation-based, online interactive teaching modules in physiology for the Stanford students. In addition, simPHYSIO provides the convenience of anytime web-access and a modular structure that allows for personalization and customization of the learning material. This innovative tool provides a solid delivery and pedagogical backbone that can be applied to developing an interactive simulation-based training tool for the use and management of the Picture Archiving and Communication System (PACS) image information system. The disparity in the knowledge between health and IT professionals can be bridged by providing convenient modular teaching tools to fill the gaps in knowledge. An innovative teaching method in the whole PACS is deemed necessary for its successful implementation and operation since it has become widely distributed with many interfaces, components, and customizations. This paper will discuss the techniques for developing an interactive-based teaching tool, a case study of its implementation, and a perspective for applying this approach to an online PACS training tool. Copyright 2002 Elsevier Science Ltd.

[Simulation training in surgical education - application of virtual reality laparoscopic simulators in a surgical skills course].

PubMed

Lehmann, K S; Gröne, J; Lauscher, J C; Ritz, J-P; Holmer, C; Pohlen, U; Buhr, H-J

2012-04-01

Training and simulation are gaining importance in surgical education. Today, virtual reality surgery simulators provide sophisticated laparoscopic training scenarios and offer detailed assessment methods. This also makes simulators interesting for the application in surgical skills courses. The aim of the current study was to assess the suitability of a virtual surgery simulator for training and assessment in an established surgical training course. The study was conducted during the annual "Practical Course for Visceral Surgery" (Warnemuende, Germany). 36 of 108 course participants were assigned at random for the study. Training was conducted in 15 sessions over 5 days with 4 identical virtual surgery simulators (LapSim) and 2 standardised training tasks. The simulator measured 16 individual parameters and calculated 2 scores. Questionnaires were used to assess the test persons' laparoscopic experience, their training situation and the acceptance of the simulator training. Data were analysed with non-parametric tests. A subgroup analysis for laparoscopic experience was conducted in order to assess the simulator's construct validity and assessment capabilities. Median age was 32 (27 - 41) years; median professional experience was 3 (1 - 11) years. Typical laparoscopic learning curves with initial significant improvements and a subsequent plateau phase were measured over 5 days. The individual training sessions exhibited a rhythmic variability in the training results. A shorter night's sleep led to a marked drop in performance. The participants' different experience levels could clearly be discriminated ( ≤ 20 vs. > 20 laparoscopic operations; p ≤ 0.001). The questionnaire showed that the majority of the participants had limited training opportunities in their hospitals. The simulator training was very well accepted. However, the participants severely misjudged the real costs of the simulators that were used. The learning curve on the simulator was successfully mastered during the course. Construct validity could be demonstrated within the course setting. The simulator's assessment system can be of value for the assessment of laparoscopic training performance within surgical skills courses. Acceptance of the simulator training is high. However, simulators are currently too expensive to be used within a large training course. © Georg Thieme Verlag KG Stuttgart · New York.

Simulation in bronchoscopy: current and future perspectives.

PubMed

Nilsson, Philip Mørkeberg; Naur, Therese Maria Henriette; Clementsen, Paul Frost; Konge, Lars

2017-01-01

To provide an overview of current literature that informs how to approach simulation practice of bronchoscopy and discuss how findings from other simulation research can help inform the use of simulation in bronchoscopy training. We conducted a literature search on simulation training of bronchoscopy and divided relevant studies in three categories: 1) structuring simulation training in bronchoscopy, 2) assessment of competence in bronchoscopy training, and 3) development of cheap alternatives for bronchoscopy simulation. Bronchoscopy simulation is effective, and the training should be structured as distributed practice with mastery learning criteria (ie, training until a certain level of competence is achieved). Dyad practice (training in pairs) is possible and may increase utility of available simulators. Trainee performance should be assessed with assessment tools with established validity. Three-dimensional printing is a promising new technology opening possibilities for developing cheap simulators with innovative features.

Nonspecialty Nurse Education: Evaluation of the Oncology Intensives Initiative, an Oncology Curriculum to Improve Patient Care

PubMed

Bagley, Kimberly A; Dunn, Sarah E; Chuang, Eliseu Y; Dorr, Victoria J; Thompson, Julie A; Smith, Sophia K

2018-04-01

A community hospital combined its medical and surgical patients with cancer on one unit, which resulted in nurses not trained in oncology caring for this patient population. The Oncology Intensives Initiative (ONCii) involved the (a) design and implementation of a daylong didactic boot camp class and a four-hour simulation session and (b) the examination of nurses' worries, attitudes, self-efficacy, and perception of interdisciplinary teamwork. A two-group, pre-/post-test design was implemented. Group 1 consisted of nurses who attended the didactic boot camp classes alone, whereas group 2 was comprised of nurses who attended the didactic boot camp classes and the simulation sessions. Results of data analysis showed a decrease in worries and an increase in positive attitudes toward chemotherapy administration in both groups, as well as an increase in self-efficacy among members of group 2.

Central venous catheterization training: current perspectives on the role of simulation

PubMed Central

Soffler, Morgan I; Hayes, Margaret M; Smith, C Christopher

2018-01-01

Simulation is a popular and effective training modality in medical education across a variety of domains. Central venous catheterization (CVC) is commonly undertaken by trainees, and carries significant risk for patient harm when carried out incorrectly. Multiple studies have evaluated the efficacy of simulation-based training programs, in comparison with traditional training modalities, on learner and patient outcomes. In this review, we discuss relevant adult learning principles that support simulation-based CVC training, review the literature on simulation-based CVC training, and highlight the use of simulation-based CVC training programs at various institutions. PMID:29872360

Central venous catheterization training: current perspectives on the role of simulation.

PubMed

Soffler, Morgan I; Hayes, Margaret M; Smith, C Christopher

2018-01-01

Simulation is a popular and effective training modality in medical education across a variety of domains. Central venous catheterization (CVC) is commonly undertaken by trainees, and carries significant risk for patient harm when carried out incorrectly. Multiple studies have evaluated the efficacy of simulation-based training programs, in comparison with traditional training modalities, on learner and patient outcomes. In this review, we discuss relevant adult learning principles that support simulation-based CVC training, review the literature on simulation-based CVC training, and highlight the use of simulation-based CVC training programs at various institutions.

The Tuscan Mobile Simulation Program: a description of a program for the delivery of in situ simulation training.

PubMed

Ullman, Edward; Kennedy, Maura; Di Delupis, Francesco Dojmi; Pisanelli, Paolo; Burbui, Andrea Giuliattini; Cussen, Meaghan; Galli, Laura; Pini, Riccardo; Gensini, Gian Franco

2016-09-01

Simulation has become a critical aspect of medical education. It allows health care providers the opportunity to focus on safety and high-risk situations in a protected environment. Recently, in situ simulation, which is performed in the actual clinical setting, has been used to recreate a more realistic work environment. This form of simulation allows for better team evaluation as the workers are in their traditional roles, and can reveal latent safety errors that often are not seen in typical simulation scenarios. We discuss the creation and implementation of a mobile in situ simulation program in emergency departments of three hospitals in Tuscany, Italy, including equipment, staffing, and start-up costs for this program. We also describe latent safety threats identified in the pilot in situ simulations. This novel approach has the potential to both reduce the costs of simulation compared to traditional simulation centers, and to expand medical simulation experiences to providers and healthcare organizations that do not have access to a large simulation center.

The role of simulation in space operations training

NASA Astrophysics Data System (ADS)

Ocasio, Frank; Atkins, Dana

The expanding use of computer simulation to train aerospace personnel is reviewed emphasizing the increasing complexity of responsibilities in the operations segment. The inefficiency of on-the-job training is discussed, and the simulation technologies employed by the USAF Combat Crew Training Squadron are described. The Mission Control Complex-Kernel is employed to simulate an operational Satellite Control Squadron (SCS) and a downscaled SCS. A system for telemetry simulation is incorporated into the launch and early-orbit segments of the training, and the training emphasizes time-critical actions, schedule adherence, and the interaction with external organizations. Hands-on training is required to supplement the simulator training which cannot be used to simulate anomalies in satellites and ground systems. The use of a centralized simulator as an instructional tool facilitates and expedites the transition of the student to operational levels.

Noncontrast Peripheral MRA with Spiral Echo Train Imaging

PubMed Central

Fielden, Samuel W.; Mugler, John P.; Hagspiel, Klaus D.; Norton, Patrick T.; Kramer, Christopher M.; Meyer, Craig H.

2015-01-01

Purpose To develop a spin echo train sequence with spiral readout gradients with improved artery–vein contrast for noncontrast angiography. Theory Venous T2 becomes shorter as the echo spacing is increased in echo train sequences, improving contrast. Spiral acquisitions, due to their data collection efficiency, facilitate long echo spacings without increasing scan times. Methods Bloch equation simulations were performed to determine optimal sequence parameters, and the sequence was applied in five volunteers. In two volunteers, the sequence was performed with a range of echo times and echo spacings to compare with the theoretical contrast behavior. A Cartesian version of the sequence was used to compare contrast appearance with the spiral sequence. Additionally, spiral parallel imaging was optionally used to improve image resolution. Results In vivo, artery–vein contrast properties followed the general shape predicted by simulations, and good results were obtained in all stations. Compared with a Cartesian implementation, the spiral sequence had superior artery–vein contrast, better spatial resolution (1.2 mm2 versus 1.5 mm2), and was acquired in less time (1.4 min versus 7.5 min). Conclusion The spiral spin echo train sequence can be used for flow-independent angiography to generate threedimensional angiograms of the periphery quickly and without the use of contrast agents. PMID:24753164

Single Anisotropic 3-D MR Image Upsampling via Overcomplete Dictionary Trained From In-Plane High Resolution Slices.

PubMed

Jia, Yuanyuan; He, Zhongshi; Gholipour, Ali; Warfield, Simon K

2016-11-01

In magnetic resonance (MR), hardware limitation, scanning time, and patient comfort often result in the acquisition of anisotropic 3-D MR images. Enhancing image resolution is desired but has been very challenging in medical image processing. Super resolution reconstruction based on sparse representation and overcomplete dictionary has been lately employed to address this problem; however, these methods require extra training sets, which may not be always available. This paper proposes a novel single anisotropic 3-D MR image upsampling method via sparse representation and overcomplete dictionary that is trained from in-plane high resolution slices to upsample in the out-of-plane dimensions. The proposed method, therefore, does not require extra training sets. Abundant experiments, conducted on simulated and clinical brain MR images, show that the proposed method is more accurate than classical interpolation. When compared to a recent upsampling method based on the nonlocal means approach, the proposed method did not show improved results at low upsampling factors with simulated images, but generated comparable results with much better computational efficiency in clinical cases. Therefore, the proposed approach can be efficiently implemented and routinely used to upsample MR images in the out-of-planes views for radiologic assessment and postacquisition processing.

Effective Training for Flight in Icing Conditions

NASA Technical Reports Server (NTRS)

Barnhart, Billy P.; Ratvasky, Thomas P.

2007-01-01

The development of a piloted flight simulator called the Ice Contamination Effects Flight Training Device (ICEFTD) was recently completed. This device demonstrates the ability to accurately represent an iced airplane s flight characteristics and is utilized to train pilots in recognizing and recovering from aircraft handling anomalies that result from airframe ice formations. The ICEFTD was demonstrated at three recent short courses hosted by the University of Tennessee Space Institute. It was also demonstrated to a group of pilots at the National Test Pilot School. In total, eighty-four pilots and flight test engineers from industry and the regulatory community spent approximately one hour each in the ICEFTD to get a "hands on" lesson of an iced airplane s reduced performance and handling qualities. Additionally, pilot cues of impending upsets and recovery techniques were demonstrated. The purpose of this training was to help pilots understand how ice contamination affects aircraft handling so they may apply that knowledge to the operations of other aircraft undergoing testing and development. Participant feedback on the ICEFTD was very positive. Pilots stated that the simulation was very valuable, applicable to their occupations, and provided a safe way to explore the flight envelope. Feedback collected at each demonstration was also helpful to define additional improvements to the ICEFTD; many of which were then implemented in subsequent demonstrations.

Demonstration of an Ice Contamination Effects Flight Training Device

NASA Technical Reports Server (NTRS)

Ratvasky, Thomas P.; Ranaudo, Richard J.; Blankenship, Kurt S.; Lee, Sam

2006-01-01

The development of a piloted flight simulator called the Ice Contamination Effects Flight Training Device (ICEFTD) was recently completed. This device demonstrates the ability to accurately represent an iced airplane s flight characteristics and is utilized to train pilots in recognizing and recovering from aircraft handling anomalies that result from airframe ice formations. The ICEFTD was demonstrated at three recent short courses hosted by the University of Tennessee Space Institute. It was also demonstrated to a group of pilots at the National Test Pilot School. In total, eighty-four pilots and flight test engineers from industry and the regulatory community spent approximately one hour each in the ICEFTD to get a "hands on" lesson of an iced airplane s reduced performance and handling qualities. Additionally, pilot cues of impending upsets and recovery techniques were demonstrated. The purpose of this training was to help pilots understand how ice contamination affects aircraft handling so they may apply that knowledge to the operations of other aircraft undergoing testing and development. Participant feedback on the ICEFTD was very positive. Pilots stated that the simulation was very valuable, applicable to their occupations, and provided a safe way to explore the flight envelope. Feedback collected at each demonstration was also helpful to define additional improvements to the ICEFTD; many of which were then implemented in subsequent demonstrations

Noncontrast peripheral MRA with spiral echo train imaging.

PubMed

Fielden, Samuel W; Mugler, John P; Hagspiel, Klaus D; Norton, Patrick T; Kramer, Christopher M; Meyer, Craig H

2015-03-01

To develop a spin echo train sequence with spiral readout gradients with improved artery-vein contrast for noncontrast angiography. Venous T2 becomes shorter as the echo spacing is increased in echo train sequences, improving contrast. Spiral acquisitions, due to their data collection efficiency, facilitate long echo spacings without increasing scan times. Bloch equation simulations were performed to determine optimal sequence parameters, and the sequence was applied in five volunteers. In two volunteers, the sequence was performed with a range of echo times and echo spacings to compare with the theoretical contrast behavior. A Cartesian version of the sequence was used to compare contrast appearance with the spiral sequence. Additionally, spiral parallel imaging was optionally used to improve image resolution. In vivo, artery-vein contrast properties followed the general shape predicted by simulations, and good results were obtained in all stations. Compared with a Cartesian implementation, the spiral sequence had superior artery-vein contrast, better spatial resolution (1.2 mm(2) versus 1.5 mm(2) ), and was acquired in less time (1.4 min versus 7.5 min). The spiral spin echo train sequence can be used for flow-independent angiography to generate three-dimensional angiograms of the periphery quickly and without the use of contrast agents. © 2014 Wiley Periodicals, Inc.

14 CFR 121.413 - Initial and transition training and checking requirements: Check airmen (airplane), check airmen...

Code of Federal Regulations, 2014 CFR

2014-01-01

... flight simulator, or in a flight training device. This paragraph applies after March 19, 1997. (b) The... simulator, or in a flight training device, as appropriate. (g) The initial and transition flight training... simulator or in a flight training device. (2) Training in the operation of flight simulators or flight...

A stream temperature model for the Peace-Athabasca River basin

NASA Astrophysics Data System (ADS)

Morales-Marin, L. A.; Rokaya, P.; Wheater, H. S.; Lindenschmidt, K. E.

2017-12-01

Water temperature plays a fundamental role in water ecosystem functioning. Because it regulates flow energy and metabolic rates in organism productivity over a broad spectrum of space and time scales, water temperature constitutes an important indicator of aquatic ecosystems health. In cold region basins, stream water temperature modelling is also fundamental to predict ice freeze-up and break-up events in order to improve flood management. Multiple model approaches such as linear and multivariable regression methods, neural network and thermal energy budged models have been developed and implemented to simulate stream water temperature. Most of these models have been applied to specific stream reaches and trained using observed data, but very little has been done to simulate water temperature in large catchment river networks. We present the coupling of RBM model, a semi-Lagrangian water temperature model for advection-dominated river system, and MESH, a semi-distributed hydrological model, to simulate stream water temperature in river catchments. The coupled models are implemented in the Peace-Athabasca River basin in order to analyze the variation in stream temperature regimes under changing hydrological and meteorological conditions. Uncertainty of stream temperature simulations is also assessed in order to determine the degree of reliability of the estimates.

Effect of body weight support variation on muscle activities during robot assisted gait: a dynamic simulation study.

PubMed

Hussain, Shahid; Jamwal, Prashant K; Ghayesh, Mergen H

2017-05-01

While body weight support (BWS) intonation is vital during conventional gait training of neurologically challenged subjects, it is important to evaluate its effect during robot assisted gait training. In the present research we have studied the effect of BWS intonation on muscle activities during robotic gait training using dynamic simulations. Two dimensional (2-D) musculoskeletal model of human gait was developed conjointly with another 2-D model of a robotic orthosis capable of actuating hip, knee and ankle joints simultaneously. The musculoskeletal model consists of eight major muscle groups namely; soleus (SOL), gastrocnemius (GAS), tibialis anterior (TA), hamstrings (HAM), vasti (VAS), gluteus maximus (GLU), uniarticular hip flexors (iliopsoas, IP), and Rectus Femoris (RF). BWS was provided at levels of 0, 20, 40 and 60% during the simulations. In order to obtain a feasible set of muscle activities during subsequent gait cycles, an inverse dynamics algorithm along with a quadratic minimization algorithm was implemented. The dynamic parameters of the robot assisted human gait such as joint angle trajectories, ground contact force (GCF), human limb joint torques and robot induced torques at different levels of BWS were derived. The patterns of muscle activities at variable BWS were derived and analysed. For most part of the gait cycle (GC) the muscle activation patterns are quite similar for all levels of BWS as is apparent from the mean of muscle activities for the complete GC. Effect of BWS variation during robot assisted gait on muscle activities was studied by developing dynamic simulation. It is expected that the proposed dynamic simulation approach will provide important inferences and information about the muscle function variations consequent upon a change in BWS during robot assisted gait. This information shall be quite important while investigating the influence of BWS intonation on neuromuscular parameters of interest during robotic gait training.

The Case for Simulation-Based Mastery Learning Education Courses for Practicing Surgeons.

PubMed

Baumann, Lauren M; Barsness, Katherine A

2018-03-12

Pediatric surgeons rely on simulation courses to develop skills for safe minimally invasive repair of complex congenital anomalies. The majority of minimally invasive surgery (MIS) training courses occur during short "exposure courses" at annual conferences. Little data are available to support the benefit of these courses relative to the safe implementation of new skills. The purpose of this article is to determine the impact of an exposure course for advanced neonatal MIS on self-perceived comfort levels with independent performance of advanced MISs. Participants of a 4-hour hands-on course for neonatal MIS were surveyed regarding clinical practices and pre- and post-training perceived "comfort levels" of MIS skills for thoracoscopic esophageal atresia with tracheoesophageal fistula (tTEF) repair, thoracoscopic left upper lobe pulmonary lobectomy (tLobe), and laparoscopic duodenal atresia (lapDA) repair. Descriptive analyses were performed. Seventeen participants completed pre- and postcourse surveys. The majority of participants had no prior experience with tLobe (59%) or lapDA (53%), and 35% had no experience with tTEF repair. Similarly, the majority were "not comfortable" with these procedures. After the short course, the majority of surgeons reported that they were "likely to perform" these operations within 6 months, despite low levels of baseline experience and comfort levels. An exposure training course led to immediate perception of increased skills and confidence. However, these courses typically do not provide basic tenets of expert performance that demands deliberate practice. Future course design should transition to a mastery learning framework wherein regular skill assessments, milestones, and unlimited education time are prioritized before implementation of the new skills.

Algebraic and adaptive learning in neural control systems

NASA Astrophysics Data System (ADS)

Ferrari, Silvia

A systematic approach is developed for designing adaptive and reconfigurable nonlinear control systems that are applicable to plants modeled by ordinary differential equations. The nonlinear controller comprising a network of neural networks is taught using a two-phase learning procedure realized through novel techniques for initialization, on-line training, and adaptive critic design. A critical observation is that the gradients of the functions defined by the neural networks must equal corresponding linear gain matrices at chosen operating points. On-line training is based on a dual heuristic adaptive critic architecture that improves control for large, coupled motions by accounting for actual plant dynamics and nonlinear effects. An action network computes the optimal control law; a critic network predicts the derivative of the cost-to-go with respect to the state. Both networks are algebraically initialized based on prior knowledge of satisfactory pointwise linear controllers and continue to adapt on line during full-scale simulations of the plant. On-line training takes place sequentially over discrete periods of time and involves several numerical procedures. A backpropagating algorithm called Resilient Backpropagation is modified and successfully implemented to meet these objectives, without excessive computational expense. This adaptive controller is as conservative as the linear designs and as effective as a global nonlinear controller. The method is successfully implemented for the full-envelope control of a six-degree-of-freedom aircraft simulation. The results show that the on-line adaptation brings about improved performance with respect to the initialization phase during aircraft maneuvers that involve large-angle and coupled dynamics, and parameter variations.

Graphic and haptic simulation for transvaginal cholecystectomy training in NOTES.

PubMed

Pan, Jun J; Ahn, Woojin; Dargar, Saurabh; Halic, Tansel; Li, Bai C; Sankaranarayanan, Ganesh; Roberts, Kurt; Schwaitzberg, Steven; De, Suvranu

2016-04-01

Natural Orifice Transluminal Endoscopic Surgery (NOTES) provides an emerging surgical technique which usually needs a long learning curve for surgeons. Virtual reality (VR) medical simulators with vision and haptic feedback can usually offer an efficient and cost-effective alternative without risk to the traditional training approaches. Under this motivation, we developed the first virtual reality simulator for transvaginal cholecystectomy in NOTES (VTEST™). This VR-based surgical simulator aims to simulate the hybrid NOTES of cholecystectomy. We use a 6DOF haptic device and a tracking sensor to construct the core hardware component of simulator. For software, an innovative approach based on the inner-spheres is presented to deform the organs in real time. To handle the frequent collision between soft tissue and surgical instruments, an adaptive collision detection method based on GPU is designed and implemented. To give a realistic visual performance of gallbladder fat tissue removal by cautery hook, a multi-layer hexahedral model is presented to simulate the electric dissection of fat tissue. From the experimental results, trainees can operate in real time with high degree of stability and fidelity. A preliminary study was also performed to evaluate the realism and the usefulness of this hybrid NOTES simulator. This prototyped simulation system has been verified by surgeons through a pilot study. Some items of its visual performance and the utility were rated fairly high by the participants during testing. It exhibits the potential to improve the surgical skills of trainee and effectively shorten their learning curve. Copyright © 2016 Elsevier Inc. All rights reserved.

Multi-ray medical ultrasound simulation without explicit speckle modelling.

PubMed

Tuzer, Mert; Yazıcı, Abdulkadir; Türkay, Rüştü; Boyman, Michael; Acar, Burak

2018-05-04

To develop a medical ultrasound (US) simulation method using T1-weighted magnetic resonance images (MRI) as the input that offers a compromise between low-cost ray-based and high-cost realistic wave-based simulations. The proposed method uses a novel multi-ray image formation approach with a virtual phased array transducer probe. A domain model is built from input MR images. Multiple virtual acoustic rays are emerged from each element of the linear transducer array. Reflected and transmitted acoustic energy at discrete points along each ray is computed independently. Simulated US images are computed by fusion of the reflected energy along multiple rays from multiple transducers, while phase delays due to differences in distances to transducers are taken into account. A preliminary implementation using GPUs is presented. Preliminary results show that the multi-ray approach is capable of generating view point-dependent realistic US images with an inherent Rician distributed speckle pattern automatically. The proposed simulator can reproduce the shadowing artefacts and demonstrates frequency dependence apt for practical training purposes. We also have presented preliminary results towards the utilization of the method for real-time simulations. The proposed method offers a low-cost near-real-time wave-like simulation of realistic US images from input MR data. It can further be improved to cover the pathological findings using an improved domain model, without any algorithmic updates. Such a domain model would require lesion segmentation or manual embedding of virtual pathologies for training purposes.

Launch Site Computer Simulation and its Application to Processes

NASA Technical Reports Server (NTRS)

Sham, Michael D.

1995-01-01

This paper provides an overview of computer simulation, the Lockheed developed STS Processing Model, and the application of computer simulation to a wide range of processes. The STS Processing Model is an icon driven model that uses commercial off the shelf software and a Macintosh personal computer. While it usually takes one year to process and launch 8 space shuttles, with the STS Processing Model this process is computer simulated in about 5 minutes. Facilities, orbiters, or ground support equipment can be added or deleted and the impact on launch rate, facility utilization, or other factors measured as desired. This same computer simulation technology can be used to simulate manufacturing, engineering, commercial, or business processes. The technology does not require an 'army' of software engineers to develop and operate, but instead can be used by the layman with only a minimal amount of training. Instead of making changes to a process and realizing the results after the fact, with computer simulation, changes can be made and processes perfected before they are implemented.

The drive-wise project: driving simulator training increases real driving performance in healthy older drivers

PubMed Central

Casutt, Gianclaudio; Theill, Nathan; Martin, Mike; Keller, Martin; Jäncke, Lutz

2014-01-01

Background: Age-related cognitive decline is often associated with unsafe driving behavior. We hypothesized that 10 active training sessions in a driving simulator increase cognitive and on-road driving performance. In addition, driving simulator training should outperform cognitive training. Methods: Ninety-one healthy active drivers (62–87 years) were randomly assigned to one of three groups: (1) a driving simulator training group, (2) an attention training group (vigilance and selective attention), or (3) a control group. The main outcome variables were on-road driving and cognitive performance. Seventy-seven participants (85%) completed the training and were included in the analyses. Training gains were analyzed using a multiple regression analysis with planned orthogonal comparisons. Results: The driving simulator-training group showed an improvement in on-road driving performance compared to the attention-training group. In addition, both training groups increased cognitive performance compared to the control group. Conclusion: Driving simulator training offers the potential to enhance driving skills in older drivers. Compared to the attention training, the simulator training seems to be a more powerful program for increasing older drivers' safety on the road. PMID:24860497

Retinal Image Simulation of Subjective Refraction Techniques.

PubMed

Perches, Sara; Collados, M Victoria; Ares, Jorge

2016-01-01

Refraction techniques make it possible to determine the most appropriate sphero-cylindrical lens prescription to achieve the best possible visual quality. Among these techniques, subjective refraction (i.e., patient's response-guided refraction) is the most commonly used approach. In this context, this paper's main goal is to present a simulation software that implements in a virtual manner various subjective-refraction techniques--including Jackson's Cross-Cylinder test (JCC)--relying all on the observation of computer-generated retinal images. This software has also been used to evaluate visual quality when the JCC test is performed in multifocal-contact-lens wearers. The results reveal this software's usefulness to simulate the retinal image quality that a particular visual compensation provides. Moreover, it can help to gain a deeper insight and to improve existing refraction techniques and it can be used for simulated training.

Design of a Fatigue Detection System for High-Speed Trains Based on Driver Vigilance Using a Wireless Wearable EEG.

PubMed

Zhang, Xiaoliang; Li, Jiali; Liu, Yugang; Zhang, Zutao; Wang, Zhuojun; Luo, Dianyuan; Zhou, Xiang; Zhu, Miankuan; Salman, Waleed; Hu, Guangdi; Wang, Chunbai

2017-03-01

The vigilance of the driver is important for railway safety, despite not being included in the safety management system (SMS) for high-speed train safety. In this paper, a novel fatigue detection system for high-speed train safety based on monitoring train driver vigilance using a wireless wearable electroencephalograph (EEG) is presented. This system is designed to detect whether the driver is drowsiness. The proposed system consists of three main parts: (1) a wireless wearable EEG collection; (2) train driver vigilance detection; and (3) early warning device for train driver. In the first part, an 8-channel wireless wearable brain-computer interface (BCI) device acquires the locomotive driver's brain EEG signal comfortably under high-speed train-driving conditions. The recorded data are transmitted to a personal computer (PC) via Bluetooth. In the second step, a support vector machine (SVM) classification algorithm is implemented to determine the vigilance level using the Fast Fourier transform (FFT) to extract the EEG power spectrum density (PSD). In addition, an early warning device begins to work if fatigue is detected. The simulation and test results demonstrate the feasibility of the proposed fatigue detection system for high-speed train safety.

Cognitive Load in Mastoidectomy Skills Training: Virtual Reality Simulation and Traditional Dissection Compared.

PubMed

Andersen, Steven Arild Wuyts; Mikkelsen, Peter Trier; Konge, Lars; Cayé-Thomasen, Per; Sørensen, Mads Sølvsten

2016-01-01

The cognitive load (CL) theoretical framework suggests that working memory is limited, which has implications for learning and skills acquisition. Complex learning situations such as surgical skills training can potentially induce a cognitive overload, inhibiting learning. This study aims to compare CL in traditional cadaveric dissection training and virtual reality (VR) simulation training of mastoidectomy. A prospective, crossover study. Participants performed cadaveric dissection before VR simulation of the procedure or vice versa. CL was estimated by secondary-task reaction time testing at baseline and during the procedure in both training modalities. The national Danish temporal bone course. A total of 40 novice otorhinolaryngology residents. Reaction time was increased by 20% in VR simulation training and 55% in cadaveric dissection training of mastoidectomy compared with baseline measurements. Traditional dissection training increased CL significantly more than VR simulation training (p < 0.001). VR simulation training imposed a lower CL than traditional cadaveric dissection training of mastoidectomy. Learning complex surgical skills can be a challenge for the novice and mastoidectomy skills training could potentially be optimized by employing VR simulation training first because of the lower CL. Traditional dissection training could then be used to supplement skills training after basic competencies have been acquired in the VR simulation. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

An Emotional ANN (EANN) approach to modeling rainfall-runoff process

NASA Astrophysics Data System (ADS)

Nourani, Vahid

2017-01-01

This paper presents the first hydrological implementation of Emotional Artificial Neural Network (EANN), as a new generation of Artificial Intelligence-based models for daily rainfall-runoff (r-r) modeling of the watersheds. Inspired by neurophysiological form of brain, in addition to conventional weights and bias, an EANN includes simulated emotional parameters aimed at improving the network learning process. EANN trained by a modified version of back-propagation (BP) algorithm was applied to single and multi-step-ahead runoff forecasting of two watersheds with two distinct climatic conditions. Also to evaluate the ability of EANN trained by smaller training data set, three data division strategies with different number of training samples were considered for the training purpose. The overall comparison of the obtained results of the r-r modeling indicates that the EANN could outperform the conventional feed forward neural network (FFNN) model up to 13% and 34% in terms of training and verification efficiency criteria, respectively. The superiority of EANN over classic ANN is due to its ability to recognize and distinguish dry (rainless days) and wet (rainy days) situations using hormonal parameters of the artificial emotional system.

Emergency preparedness volunteer training program.

PubMed

Matthews, Amanda K; Sprague, Kristin; Girling, Eileen; Dapice, Lynne; Palumbo, Mary Val; Berry, Patricia

2005-11-01

The Vermont Department of Health (VDH) does not have sufficient personnel to fully staff a mass prophylaxis or vaccination clinic in response to a natural or man-made disease outbreak. Therefore, the VDH developed an emergency preparedness volunteer training program with three primary goals: to include both background information about public health and emergency preparedness and a hands-on training for clinic volunteers; to be adaptable for both community and healthcare professional volunteers; and to examine local emergencies and the VDH public health response to these events. Major components of the training program include basic public health goals and capacities; an introduction to emergency preparedness; a role-playing exercise using Job Action Sheets to simulate "just-in-time" training; and guidance for personal and family preparedness. The VDH has experienced difficulty finding and recruiting volunteers. To increase the potential volunteer pool, it will be implementing a multifaceted training program (on-line, through the mail, in person) to most effectively engage volunteers with varying interests and learning styles. The VDH must also develop a system to maintain regular contact with volunteers and clarify regulations regarding their scope of practice and liability.

High educational impact of a national simulation-based urological curriculum including technical and non-technical skills.

PubMed

de Vries, Anna H; Schout, Barbara M A; van Merriënboer, Jeroen J G; Pelger, Rob C M; Koldewijn, Evert L; Muijtjens, Arno M M; Wagner, Cordula

2017-02-01

Although simulation training is increasingly used to meet modern technology and patient safety demands, its successful integration within surgical curricula is still rare. The Dutch Urological Practical Skills (D-UPS) curriculum provides modular simulation-based training of technical and non-technical basic urological skills in the local hospital setting. This study aims to assess the educational impact of implementing the D-UPS curriculum in the Netherlands and to provide focus points for improvement of the D-UPS curriculum according to the participants. Educational impact was assessed by means of qualitative individual module-specific feedback and a quantitative cross-sectional survey among residents and supervisors. Twenty out of 26 Dutch teaching hospitals participated. The survey focussed on practical aspects, the D-UPS curriculum in general, and the impact of the D-UPS curriculum on the development of technical and non-technical skills. A considerable survey response of 95 % for residents and 76 % for supervisors was obtained. Modules were attended by junior and senior residents, supervised by a urologist, and peer teaching was used. Ninety percent of supervisors versus 67 % of residents judged the D-UPS curriculum as an important addition to current residency training (p = 0.007). Participants' aggregated general judgement of the modules showed a substantial percentage favorable score (M ± SE: 57 ± 4 %). The impact of training on, e.g., knowledge of materials/equipment and ability to anticipate on complications was high, especially for junior residents (77 ± 5 and 71 ± 7 %, respectively). Focus points for improvement of the D-UPS curriculum according to the participants include adaptation of the training level to residents' level of experience and focus on logistics. The simulation-based D-UPS curriculum has a high educational impact. Residents and supervisors consider the curriculum to be an important addition to current residency training. Focus points for improvement of the D-UPS curriculum according to the participants include increased attention to logistics and integration of a spiral learning approach.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klein, Steven Karl; Determan, John C.

Dynamic System Simulation (DSS) models of fissile solution systems have been developed and verified against a variety of historical configurations. DSS techniques have been applied specifically to subcritical accelerator-driven systems using fissile solution fuels of uranium. Initial DSS models were developed in DESIRE, a specialized simulation scripting language. In order to tailor the DSS models to specifically meet needs of system designers they were converted to a Visual Studio implementation, and one of these subsequently to National Instrument’s LabVIEW for human factors engineering and operator training. Specific operational characteristics of subcritical accelerator-driven systems have been examined using a DSS modelmore » tailored to this particular class using fissile fuel.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sweeney, J. J.; Ford, S. R.

The experience of IFE14 emphasizes the need for a better way to simulate aftershocks during an OSI exercise. The obvious approach is to develop a digital model of aftershocks that can be used either for a real field exercise or for a computer simulation that can be done in an office, for training for example. However, this approach involves consideration of several aspects, such as how and when to introduce waveforms in a way that maximizes the realism of the data and that will be convincing to a savvy, experienced seismic analyst. The purpose of this report is to outlinemore » a plan for how this approach can be implemented.« less

High-Fidelity Simulation: Preparing Dental Hygiene Students for Managing Medical Emergencies.

PubMed

Bilich, Lisa A; Jackson, Sarah C; Bray, Brenda S; Willson, Megan N

2015-09-01

Medical emergencies can occur at any time in the dental office, so being prepared to properly manage the situation can be the difference between life and death. The entire dental team must be properly trained regarding all aspects of emergency management in the dental clinic. The aim of this study was to evaluate a new educational approach using a high-fidelity simulator to prepare dental hygiene students for medical emergencies. This study utilized high-fidelity simulation (HFS) to evaluate the abilities of junior dental hygiene students at Eastern Washington University to handle a medical emergency in the dental hygiene clinic. Students were given a medical emergency scenario requiring them to assess the emergency and implement life-saving protocols in a simulated "real-life" situation using a high-fidelity manikin. Retrospective data were collected for four years from the classes of 2010 through 2013 (N=114). The results indicated that learning with simulation was effective in helping the students identify the medical emergency in a timely manner, implement emergency procedures correctly, locate and correctly utilize contents of the emergency kit, administer appropriate intervention/treatment for a specific patient, and provide the patient with appropriate follow-up instructions. For dental hygiene programs seeking to enhance their curricula in the area of medical emergencies, this study suggests that HFS is an effective tool to prepare students to appropriately handle medical emergencies. Faculty calibration is essential to standardize simulation.

The Implementation and Validation of a Virtual Environment for Training Powered Wheelchair Manoeuvres.

PubMed

John, Nigel W; Pop, Serban R; Day, Thomas W; Ritsos, Panagiotis D; Headleand, Christopher J

2018-05-01

Navigating a powered wheelchair and avoiding collisions is often a daunting task for new wheelchair users. It takes time and practice to gain the coordination needed to become a competent driver and this can be even more of a challenge for someone with a disability. We present a cost-effective virtual reality (VR) application that takes advantage of consumer level VR hardware. The system can be easily deployed in an assessment centre or for home use, and does not depend on a specialized high-end virtual environment such as a Powerwall or CAVE. This paper reviews previous work that has used virtual environments technology for training tasks, particularly wheelchair simulation. We then describe the implementation of our own system and the first validation study carried out using thirty three able bodied volunteers. The study results indicate that at a significance level of 5 percent then there is an improvement in driving skills from the use of our VR system. We thus have the potential to develop the competency of a wheelchair user whilst avoiding the risks inherent to training in the real world. However, the occurrence of cybersickness is a particular problem in this application that will need to be addressed.

Virtual Observer Controller (VOC) for Small Unit Infantry Laser Simulation Training

DTIC Science & Technology

2007-04-01

per-seat license when deployed. As a result, ViaVoice was abandoned early in development. Next, the SPHINX engine from Carnegie Mellon University was...examined. Sphinx is Java-based software, providing cross-platform functionality, and it is also free, open-source software. Software developers at...IST had experience using SPHINX , so it was initially selected it to be the VOC speech engine. After implementing a small portion of the VOC grammar

Real-Time CMA Equalization of SOQPSK for Aeronautical Telemetry

DTIC Science & Technology

2014-06-01

1 2 4 6 Channel Length 9 20 19 4 No. of Non-zero taps 3 8 9 4 EXPERIMENTAL SETUP Implementation of the CMA for PAQ For this...through the U.S. Army Program Exectuve Offcie for Simulation, Training and Instrumentation (PEO STRI) under contract W900KK_13-C-0026 ( PAQ ...telemetry ( PAQ ),” Brigham Young University, Technical Report, 2014, submitted to the Spectrum Efficient Technologies (SET) Office of the Science

Developing a Field Artillery Training System Based on Devices and Simulations: Evaluation of Training Devices and Simulations

DTIC Science & Technology

1984-12-01

best trained by instruction alone or with simple demonstration materials. Training Devices are judged best for training the routine use of specific...pieces of equipment (e.g., Howitzer, BCS, DMD/FIST DMD, GLLD, LRF, map/compass/ plotting tools). Simulations are judged best for training more complex...at all phases of engagement operations. Simulations are also judged best for conducting training of any task under extreme environments and

MODSIM World 2007 Conference and Expo: Select Papers and Presentations from the Education and Training Track

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E. (Editor); Sullivan, Shannon (Editor); Sanchez, Alicia (Editor)

2008-01-01

This NASA Conference Publication features select papers and PowerPoint presentations from the Education and Training Track of MODSIM World 2007 Conference and Expo. Invited speakers and panelists of national and international renown, representing academia, industry and government, discussed how modeling and simulation (M&S) technology can be used to accelerate learning in the K-16 classroom, especially when using M&S technology as a tool for integrating science, technology, engineering and mathematics (STEM) classes. The presenters also addressed the application ofM&S technology to learning and training outside of the classroom. Specific sub-topics of the presentations included: learning theory; curriculum development; professional development; tools/user applications; implementation/infrastructure/issues; and workforce development. There was a session devoted to student M&S competitions in Virginia too, as well as a poster session.

Computer-based simulation training in emergency medicine designed in the light of malpractice cases.

PubMed

Karakuş, Akan; Duran, Latif; Yavuz, Yücel; Altintop, Levent; Calişkan, Fatih

2014-07-27

Using computer-based simulation systems in medical education is becoming more and more common. Although the benefits of practicing with these systems in medical education have been demonstrated, advantages of using computer-based simulation in emergency medicine education are less validated. The aim of the present study was to assess the success rates of final year medical students in doing emergency medical treatment and evaluating the effectiveness of computer-based simulation training in improving final year medical students' knowledge. Twenty four Students trained with computer-based simulation and completed at least 4 hours of simulation-based education between the dates Feb 1, 2010 - May 1, 2010. Also a control group (traditionally trained, n =24) was chosen. After the end of training, students completed an examination about 5 randomized medical simulation cases. In 5 cases, an average of 3.9 correct medical approaches carried out by computer-based simulation trained students, an average of 2.8 correct medical approaches carried out by traditionally trained group (t = 3.90, p < 0.005). We found that the success of students trained with simulation training in cases which required complicated medical approach, was statistically higher than the ones who didn't take simulation training (p ≤ 0.05). Computer-based simulation training would be significantly effective in learning of medical treatment algorithms. We thought that these programs can improve the success rate of students especially in doing adequate medical approach to complex emergency cases.

49 CFR 239.103 - Passenger train emergency simulations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Passenger train emergency simulations. 239.103....103 Passenger train emergency simulations. (a) General. Each railroad operating passenger train service shall conduct full-scale emergency simulations, in order to determine its capability to execute...

49 CFR 239.103 - Passenger train emergency simulations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Passenger train emergency simulations. 239.103....103 Passenger train emergency simulations. (a) General. Each railroad operating passenger train service shall conduct full-scale emergency simulations, in order to determine its capability to execute...

49 CFR 239.103 - Passenger train emergency simulations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Passenger train emergency simulations. 239.103....103 Passenger train emergency simulations. (a) General. Each railroad operating passenger train service shall conduct full-scale emergency simulations, in order to determine its capability to execute...

49 CFR 239.103 - Passenger train emergency simulations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Passenger train emergency simulations. 239.103....103 Passenger train emergency simulations. (a) General. Each railroad operating passenger train service shall conduct full-scale emergency simulations, in order to determine its capability to execute...

Some Factors Influencing Air Force Simulator Training Effectiveness. Technical Report.

ERIC Educational Resources Information Center

Caro, Paul W.

A study of U.S. Air Force simulator training was conducted to identify factors that influence the effectiveness of such training and to learn how its effectiveness is being determined. The research consisted of a survey of ten representative Air Force simulator training programs and a review of the simulator training research literature. A number…

The Persistent Issue of Simulator Sickness in Naval Aviation Training.

PubMed

Geyer, Daniel J; Biggs, Adam T

2018-04-01

Virtual simulations offer nearly unlimited training potential for naval aviation due to the wide array of scenarios that can be simulated in a safe, reliable, and cost-effective environment. This versatility has created substantial interest in using existing and emerging virtual technology to enhance training scenarios. However, the virtual simulations themselves may hinder training initiatives by inducing simulator sickness among the trainees, which is a series of symptoms similar to motion sickness that can arise from simulator use. Simulator sickness has been a problem for military aviation since the first simulators were introduced. The problem has also persisted despite the increasing fidelity and sense of immersion offered by new generations of simulators. As such, it is essential to understand the various problems so that trainers can ensure the best possible use of the simulators. This review will examine simulator sickness as it pertains to naval aviation training. Topics include: the prevailing theories on why symptoms develop, methods of measurement, contributing factors, effects on training, effects when used shipboard, aftereffects, countermeasures, and recommendations for future research involving virtual simulations in an aviation training environment.Geyer DJ, Biggs AT. The persistent issue of simulator sickness in naval aviation training. Aerosp Med Hum Perform. 2018; 89(4):396-405.

Learning fuzzy logic control system

NASA Technical Reports Server (NTRS)

Lung, Leung Kam

1994-01-01

The performance of the Learning Fuzzy Logic Control System (LFLCS), developed in this thesis, has been evaluated. The Learning Fuzzy Logic Controller (LFLC) learns to control the motor by learning the set of teaching values that are generated by a classical PI controller. It is assumed that the classical PI controller is tuned to minimize the error of a position control system of the D.C. motor. The Learning Fuzzy Logic Controller developed in this thesis is a multi-input single-output network. Training of the Learning Fuzzy Logic Controller is implemented off-line. Upon completion of the training process (using Supervised Learning, and Unsupervised Learning), the LFLC replaces the classical PI controller. In this thesis, a closed loop position control system of a D.C. motor using the LFLC is implemented. The primary focus is on the learning capabilities of the Learning Fuzzy Logic Controller. The learning includes symbolic representation of the Input Linguistic Nodes set and Output Linguistic Notes set. In addition, we investigate the knowledge-based representation for the network. As part of the design process, we implement a digital computer simulation of the LFLCS. The computer simulation program is written in 'C' computer language, and it is implemented in DOS platform. The LFLCS, designed in this thesis, has been developed on a IBM compatible 486-DX2 66 computer. First, the performance of the Learning Fuzzy Logic Controller is evaluated by comparing the angular shaft position of the D.C. motor controlled by a conventional PI controller and that controlled by the LFLC. Second, the symbolic representation of the LFLC and the knowledge-based representation for the network are investigated by observing the parameters of the Fuzzy Logic membership functions and the links at each layer of the LFLC. While there are some limitations of application with this approach, the result of the simulation shows that the LFLC is able to control the angular shaft position of the D.C. motor. Furthermore, the LFLC has better performance in rise time, settling time and steady state error than to the conventional PI controller. This abstract accurately represents the content of the candidate's thesis. I recommend its publication.

Preparing palliative home care nurses to act as facilitators for physicians' learning: Evaluation of a training programme.

PubMed

Pype, Peter; Mertens, Fien; Wens, Johan; Stes, Ann; Van den Eynden, Bart; Deveugele, Myriam

2015-05-01

Palliative care requires a multidisciplinary care team. General practitioners often ask specialised palliative home care teams for support. Working with specialised nurses offers learning opportunities, also called workplace learning. This can be enhanced by the presence of a learning facilitator. To describe the development and evaluation of a training programme for nurses in primary care. The programme aimed to prepare palliative home care team nurses to act as facilitators for general practitioners' workplace learning. A one-group post-test only design (quantitative) and semi-structured interviews (qualitative) were used. A multifaceted train-the-trainer programme was designed. Evaluation was done through assignments with individual feedback, summative assessment through videotaped encounters with simulation-physicians and individual interviews after a period of practice implementation. A total of 35 nurses followed the programme. The overall satisfaction was high. Homework assignments interfered with the practice workload but showed to be fundamental in translating theory into practice. Median score on the summative assessment was 7 out of 14 with range 1-13. Interviews revealed some aspects of the training (e.g. incident analysis) to be too difficult for implementation or to be in conflict with personal preferences (focus on patient care instead of facilitating general practitioners' learning). Training palliative home care team nurses as facilitator of general practitioners' workplace learning is a feasible but complex intervention. Personal characteristics, interpersonal relationships and contextual variables have to be taken into account. Training expert palliative care nurses to facilitate general practitioners' workplace learning requires careful and individualised mentoring. © The Author(s) 2014.

An empirical identification and categorisation of training best practices for ERP implementation projects

NASA Astrophysics Data System (ADS)

Esteves, Jose Manuel

2014-11-01

Although training is one of the most cited critical success factors in Enterprise Resource Planning (ERP) systems implementations, few empirical studies have attempted to examine the characteristics of management of the training process within ERP implementation projects. Based on the data gathered from a sample of 158 respondents across four stakeholder groups involved in ERP implementation projects, and using a mixed method design, we have assembled a derived set of training best practices. Results suggest that the categorised list of ERP training best practices can be used to better understand training activities in ERP implementation projects. Furthermore, the results reveal that the company size and location have an impact on the relevance of training best practices. This empirical study also highlights the need to investigate the role of informal workplace trainers in ERP training activities.

14 CFR 142.54 - Airline transport pilot certification training program.

Code of Federal Regulations, 2014 CFR

2014-01-01

... training in a flight simulation training device— (1) Holds an aircraft type rating for the aircraft represented by the flight simulation training device utilized in the training program and have received... will be demonstrated in the flight simulation training device; and (2) Satisfies the requirements of...

14 CFR 121.408 - Training equipment other than flight simulation training devices.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Training equipment other than flight simulation training devices. 121.408 Section 121.408 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... § 121.408 Training equipment other than flight simulation training devices. (a) The Administrator must...

“See One, Sim One, Do One”- A National Pre-Internship Boot-Camp to Ensure a Safer "Student to Doctor" Transition

PubMed Central

Sagi, Doron; Berkenstadt, Haim; Ziv, Amitai

2016-01-01

Introduction The transition for being a medical student to a full functioning intern is accompanied by considerable stress and sense of unpreparedness. Simulation based workshops were previously reported to be effective in improving the readiness of interns and residents to their daily needed skills but only few programs were implemented on a large scale. Methods A nationally endorsed and mandated pre-internship simulation based workshop is reported. We hypothesized that this intervention will have a meaningful and sustained impact on trainees' perception of their readiness to internship with regard to patient safety and quality of care skills. Main outcome measure was the workshop’s contribution to professional training in general and to critical skills and error prevention in particular, as perceived by participants. Results Between 2004 and 2011, 85 workshops were conducted for a total of 4,172 trainees. Eight-hundred and six of the 2,700 participants approached by e-mail, returned feedback evaluation forms, which were analyzed. Eighty five percent of trainees perceived the workshop as an essential component of their professional training, and 87% agreed it should be mandatory. These ratings peaked during internship and were generally sustained 3 years following the workshop. Contribution to emergency care skills was especially highly ranked (83%). Conclusion Implementation of a mandatory, simulation-based, pre-internship workshop on a national scale made a significant perceived impact on interns and residents. The sustained impact should encourage adopting this approach to facilitate the student to doctor transition. PMID:26934593

ISS Double-Gimbaled CMG Subsystem Simulation Using the Agile Development Method

NASA Technical Reports Server (NTRS)

Inampudi, Ravi

2016-01-01

This paper presents an evolutionary approach in simulating a cluster of 4 Control Moment Gyros (CMG) on the International Space Station (ISS) using a common sense approach (the agile development method) for concurrent mathematical modeling and simulation of the CMG subsystem. This simulation is part of Training systems for the 21st Century simulator which will provide training for crew members, instructors, and flight controllers. The basic idea of how the CMGs on the space station are used for its non-propulsive attitude control is briefly explained to set up the context for simulating a CMG subsystem. Next different reference frames and the detailed equations of motion (EOM) for multiple double-gimbal variable-speed control moment gyroscopes (DGVs) are presented. Fixing some of the terms in the EOM becomes the special case EOM for ISS's double-gimbaled fixed speed CMGs. CMG simulation development using the agile development method is presented in which customer's requirements and solutions evolve through iterative analysis, design, coding, unit testing and acceptance testing. At the end of the iteration a set of features implemented in that iteration are demonstrated to the flight controllers thus creating a short feedback loop and helping in creating adaptive development cycles. The unified modeling language (UML) tool is used in illustrating the user stories, class designs and sequence diagrams. This incremental development approach of mathematical modeling and simulating the CMG subsystem involved the development team and the customer early on, thus improving the quality of the working CMG system in each iteration and helping the team to accurately predict the cost, schedule and delivery of the software.

14 CFR 121.407 - Training program: Approval of airplane simulators and other training devices.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Training program: Approval of airplane... Program § 121.407 Training program: Approval of airplane simulators and other training devices. (a) Each airplane simulator and other training device that is used in a training course permitted under § 121.409...

14 CFR 121.407 - Training program: Approval of airplane simulators and other training devices.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Training program: Approval of airplane... Program § 121.407 Training program: Approval of airplane simulators and other training devices. (a) Each airplane simulator and other training device that is used in a training course permitted under § 121.409...

14 CFR 121.407 - Training program: Approval of airplane simulators and other training devices.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Training program: Approval of airplane... Program § 121.407 Training program: Approval of airplane simulators and other training devices. (a) Each airplane simulator and other training device that is used in a training course permitted under § 121.409...

14 CFR 121.407 - Training program: Approval of airplane simulators and other training devices.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Training program: Approval of airplane... Program § 121.407 Training program: Approval of airplane simulators and other training devices. (a) Each airplane simulator and other training device that is used in a training course permitted under § 121.409...

Framework for incorporating simulation into urology training.

PubMed

Arora, Sonal; Lamb, Benjamin; Undre, Shabnam; Kneebone, Roger; Darzi, Ara; Sevdalis, Nick

2011-03-01

• Changes to working hours, new technologies and increased accountability have rendered the need for alternative training environments for urologists. • Simulation offers a promising arena for learning to take place in a safe, realistic setting. • Despite its benefits, the incorporation of simulation into urological training programmes remains minimal. • The current status and future directions of simulation for training in technical and non-technical skills are reviewed as they pertain to urology. • A framework is presented for how simulation-based training could be incorporated into the entire urological curriculum. • The literature on simulation in technical and non-technical skills training is reviewed, with a specific focus upon urology. • To fully integrate simulation into a training curriculum, its possibilities for addressing all the competencies required by a urologist must be realized. • At an early stage of training, simulation has been used to develop basic technical skills and cognitive skills, such as decision-making and communication. • At an intermediate stage, the studies focus upon more advanced technical skills learnt with virtual reality simulators. • Non-technical skills training would include leadership and could be delivered with in situ models. • At the final stage, experienced trainees can practise technical and non-technical skills in full crisis simulations situated within a fully-simulated operating rooms. • Simulation can provide training in the technical and non-technical skills required to be a competent urologist. • The framework presented may guide how best to incorporate simulation into training curricula. • Future work should determine whether acquired skills transfer to clinical practice and improve patient care. © 2010 THE AUTHORS. BJU INTERNATIONAL © 2010 BJU INTERNATIONAL.

14 CFR 121.915 - Continuing qualification curriculum.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., flight training device, flight simulator, or other equipment, as appropriate, on normal, abnormal, and... training in the type flight training device or the type flight simulator, as appropriate, regarding... flight simulators or flight training devices: Training in operational flight procedures and maneuvers...

14 CFR 121.915 - Continuing qualification curriculum.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., flight training device, flight simulator, or other equipment, as appropriate, on normal, abnormal, and... training in the type flight training device or the type flight simulator, as appropriate, regarding... flight simulators or flight training devices: Training in operational flight procedures and maneuvers...

14 CFR 121.915 - Continuing qualification curriculum.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., flight training device, flight simulator, or other equipment, as appropriate, on normal, abnormal, and... training in the type flight training device or the type flight simulator, as appropriate, regarding... flight simulators or flight training devices: Training in operational flight procedures and maneuvers...

A program to generate simulated radioxenon beta–gamma data for concentration verification and validation and training exercises

DOE Office of Scientific and Technical Information (OSTI.GOV)

McIntyre, Justin I.; Schrom, Brian T.; Cooper, Matthew W.

2016-03-08

Abstract Several hundred simulated radioxenon beta-gamma data files were developed to assist in evaluating the performance and results from radioxenon concentration calculation analysis at the International Data Center (IDC) and other National Data Centers (NDC). PNNL developed a Beta-Gamma Simulator (BGSim) that incorporated GEANT-modeled data sets from radioxenon decay chains, as well as functionality to use nuclear detector-acquired data sets to create new beta-gamma spectra with varying amounts of background, 133Xe, 131mXe, 133mXe, 135Xe, and 222Rn and its decay products. The program has been implemented on a web-based applications platform and allows the user to create very specific data setsmore » that incorporate most of the operational parameters for the current beta-gamma systems deployed in the International Monitoring System (IMS) and the On-site Inspection (OSI) equipment. After an initial beta-gamma simulations program was developed, additional uses began to be identified for the program output: training sets of two-dimensional spectra for data analysts at the IDC and other NDC, spectra for exercises such as the Integrated Field Exercise 2014 (IFE14) held in Jordan at the Dead Sea, and testing new analysis methods and algorithms« less

Neuromorphic Kalman filter implementation in IBM’s TrueNorth

NASA Astrophysics Data System (ADS)

Carney, R.; Bouchard, K.; Calafiura, P.; Clark, D.; Donofrio, D.; Garcia-Sciveres, M.; Livezey, J.

2017-10-01

Following the advent of a post-Moore’s law field of computation, novel architectures continue to emerge. With composite, multi-million connection neuromorphic chips like IBM’s TrueNorth, neural engineering has now become a feasible technology in this novel computing paradigm. High Energy Physics experiments are continuously exploring new methods of computation and data handling, including neuromorphic, to support the growing challenges of the field and be prepared for future commodity computing trends. This work details the first instance of a Kalman filter implementation in IBM’s neuromorphic architecture, TrueNorth, for both parallel and serial spike trains. The implementation is tested on multiple simulated systems and its performance is evaluated with respect to an equivalent non-spiking Kalman filter. The limits of the implementation are explored whilst varying the size of weight and threshold registers, the number of spikes used to encode a state, size of neuron block for spatial encoding, and neuron potential reset schemes.

Collaborative virtual reality based advanced cardiac life support training simulator using virtual reality principles.

PubMed

Khanal, Prabal; Vankipuram, Akshay; Ashby, Aaron; Vankipuram, Mithra; Gupta, Ashish; Drumm-Gurnee, Denise; Josey, Karen; Tinker, Linda; Smith, Marshall

2014-10-01

Advanced Cardiac Life Support (ACLS) is a series of team-based, sequential and time constrained interventions, requiring effective communication and coordination of activities that are performed by the care provider team on a patient undergoing cardiac arrest or respiratory failure. The state-of-the-art ACLS training is conducted in a face-to-face environment under expert supervision and suffers from several drawbacks including conflicting care provider schedules and high cost of training equipment. The major objective of the study is to describe, including the design, implementation, and evaluation of a novel approach of delivering ACLS training to care providers using the proposed virtual reality simulator that can overcome the challenges and drawbacks imposed by the traditional face-to-face training method. We compare the efficacy and performance outcomes associated with traditional ACLS training with the proposed novel approach of using a virtual reality (VR) based ACLS training simulator. One hundred and forty-eight (148) ACLS certified clinicians, translating into 26 care provider teams, were enrolled for this study. Each team was randomly assigned to one of the three treatment groups: control (traditional ACLS training), persuasive (VR ACLS training with comprehensive feedback components), or minimally persuasive (VR ACLS training with limited feedback components). The teams were tested across two different ACLS procedures that vary in the degree of task complexity: ventricular fibrillation or tachycardia (VFib/VTach) and pulseless electric activity (PEA). The difference in performance between control and persuasive groups was not statistically significant (P=.37 for PEA and P=.1 for VFib/VTach). However, the difference in performance between control and minimally persuasive groups was significant (P=.05 for PEA and P=.02 for VFib/VTach). The pre-post comparison of performances of the groups showed that control (P=.017 for PEA, P=.01 for VFib/VTach) and persuasive (P=.02 for PEA, P=.048 for VFib/VTach) groups improved their performances significantly, whereas minimally persuasive group did not (P=.45 for PEA, P=.46 for VFib/VTach). Results also suggest that the benefit of persuasiveness is constrained by the potentially interruptive nature of these features. Our results indicate that the VR-based ACLS training with proper feedback components can provide a learning experience similar to face-to-face training, and therefore could serve as a more easily accessed supplementary training tool to the traditional ACLS training. Our findings also suggest that the degree of persuasive features in VR environments have to be designed considering the interruptive nature of the feedback elements. Copyright © 2014 Elsevier Inc. All rights reserved.

Progress in virtual reality simulators for surgical training and certification.

PubMed

de Visser, Hans; Watson, Marcus O; Salvado, Olivier; Passenger, Joshua D

2011-02-21

There is increasing evidence that educating trainee surgeons by simulation is preferable to traditional operating-room training methods with actual patients. Apart from reducing costs and risks to patients, training by simulation can provide some unique benefits, such as greater control over the training procedure and more easily defined metrics for assessing proficiency. Virtual reality (VR) simulators are now playing an increasing role in surgical training. However, currently available VR simulators lack the fidelity to teach trainees past the novice-to-intermediate skills level. Recent technological developments in other industries using simulation, such as the games and entertainment and aviation industries, suggest that the next generation of VR simulators should be suitable for training, maintenance and certification of advanced surgical skills. To be effective as an advanced surgical training and assessment tool, VR simulation needs to provide adequate and relevant levels of physical realism, case complexity and performance assessment. Proper validation of VR simulators and an increased appreciation of their value by the medical profession are crucial for them to be accepted into surgical training curricula.

A review of virtual reality based training simulators for orthopaedic surgery.

PubMed

Vaughan, Neil; Dubey, Venketesh N; Wainwright, Thomas W; Middleton, Robert G

2016-02-01

This review presents current virtual reality based training simulators for hip, knee and other orthopaedic surgery, including elective and trauma surgical procedures. There have not been any reviews focussing on hip and knee orthopaedic simulators. A comparison of existing simulator features is provided to identify what is missing and what is required to improve upon current simulators. In total 11 hip replacements pre-operative planning tools were analysed, plus 9 hip trauma fracture training simulators. Additionally 9 knee arthroscopy simulators and 8 other orthopaedic simulators were included for comparison. The findings are that for orthopaedic surgery simulators in general, there is increasing use of patient-specific virtual models which reduce the learning curve. Modelling is also being used for patient-specific implant design and manufacture. Simulators are being increasingly validated for assessment as well as training. There are very few training simulators available for hip replacement, yet more advanced virtual reality is being used for other procedures such as hip trauma and drilling. Training simulators for hip replacement and orthopaedic surgery in general lag behind other surgical procedures for which virtual reality has become more common. Further developments are required to bring hip replacement training simulation up to date with other procedures. This suggests there is a gap in the market for a new high fidelity hip replacement and resurfacing training simulator. Copyright © 2015 IPEM. Published by Elsevier Ltd. All rights reserved.

A Multidisciplinary Approach to a Pediatric Difficult Airway Simulation Course.

PubMed

Lind, Meredith Merz; Corridore, Marco; Sheehan, Cameron; Moore-Clingenpeel, Melissa; Maa, Tensing

2018-02-01

Objective To design and assess an advanced pediatric airway management course, through simulation-based team training and with multiple disciplines, to emphasize communication and cooperation across subspecialties and to provide a common skill set and knowledge base. Methods Trainees from anesthesiology, emergency medicine, critical care, pediatric surgery, and otolaryngology at a tertiary children's hospital participated in a 1-day workshop emphasizing airway skills and complex airway simulations. Small groups were multidisciplinary to promote teamwork. Participants completed pre- and postworkshop questionnaires. Results Thirty-nine trainees participated over the 3-year study period. Compared with their precourse responses, participants' postcourse responses indicated either agreement or strong agreement that the multidisciplinary format (1) helped in the development of team communication skills and (2) was preferred over single-discipline training. Improvement in confidence in managing critical airway situations and in advanced airway management skills was significant ( P < .05). Eighty-one percent of participants had improved confidence in following the hospital's critical airway protocol, and 64% were better able to locate advanced airway management equipment. Discussion Multiple subspecialists manage pediatric respiratory failure, where successful care requires complex handoffs and teamwork. Multidisciplinary education to teach advanced airway management, teamwork, and communication skills is practical and preferred by learners and is possible to achieve despite differences in experience. Future study is required to better understand the impact of this course on patient care outcomes. Implications for Practice Implementation of a pediatric difficult airway course through simulation-based team training is feasible and preferred by learners among multiple disciplines. A multidisciplinary approach exposes previously unrecognized knowledge gaps and allows for better communication and collaboration among the fields.

Snowplow Simulator Training Study

DOT National Transportation Integrated Search

2011-01-01

This report evaluates simulation training of IDOT snowplow operators to improve IDOT snow and ice removal : operations. Specifically, it assesses a drivers evaluation of snowplow simulation training immediately after : training in fall 2009 and ag...

Implementation and evaluation of a simulation curriculum for paediatric residency programs including just-in-time in situ mock codes

PubMed Central

Sam, Jonathan; Pierse, Michael; Al-Qahtani, Abdullah; Cheng, Adam

2012-01-01

OBJECTIVE: To develop, implement and evaluate a simulation-based acute care curriculum in a paediatric residency program using an integrated and longitudinal approach. DESIGN: Curriculum framework consisting of three modular, year-specific courses and longitudinal just-in-time, in situ mock codes. SETTING: Paediatric residency program at BC Children’s Hospital, Vancouver, British Columbia. INTERVENTIONS: The three year-specific courses focused on the critical first 5 min, complex medical management and crisis resource management, respectively. The just-in-time in situ mock codes simulated the acute deterioration of an existing ward patient, prepared the actual multidisciplinary code team, and primed the surrounding crisis support systems. Each curriculum component was evaluated with surveys using a five-point Likert scale. RESULTS: A total of 40 resident surveys were completed after each of the modular courses, and an additional 28 surveys were completed for the overall simulation curriculum. The highest Likert scores were for hands-on skill stations, immersive simulation environment and crisis resource management teaching. Survey results also suggested that just-in-time mock codes were realistic, reinforced learning, and prepared ward teams for patient deterioration. CONCLUSIONS: A simulation-based acute care curriculum was successfully integrated into a paediatric residency program. It provides a model for integrating simulation-based learning into other training programs, as well as a model for any hospital that wishes to improve paediatric resuscitation outcomes using just-in-time in situ mock codes. PMID:23372405

Cognitive/emotional models for human behavior representation in 3D avatar simulations

NASA Astrophysics Data System (ADS)

Peterson, James K.

2004-08-01

Simplified models of human cognition and emotional response are presented which are based on models of auditory/ visual polymodal fusion. At the core of these models is a computational model of Area 37 of the temporal cortex which is based on new isocortex models presented recently by Grossberg. These models are trained using carefully chosen auditory (musical sequences), visual (paintings) and higher level abstract (meta level) data obtained from studies of how optimization strategies are chosen in response to outside managerial inputs. The software modules developed are then used as inputs to character generation codes in standard 3D virtual world simulations. The auditory and visual training data also enable the development of simple music and painting composition generators which significantly enhance one's ability to validate the cognitive model. The cognitive models are handled as interacting software agents implemented as CORBA objects to allow the use of multiple language coding choices (C++, Java, Python etc) and efficient use of legacy code.

Model simulations of the adsorption of statherin to solid surfaces: Effects of surface charge and hydrophobicity

NASA Astrophysics Data System (ADS)

Skepö, M.

2008-11-01

The structural properties of the salivary protein statherin upon adsorption have been examined using a coarse-grained model and Monte Carlo simulation. A simple model system with focus on electrostatic interactions and short-ranged attractions among the uncharged amino acids has been used. To mimic hydrophobically modified surfaces, an extra short-ranged interaction was implemented between the amino acids and the surface. It has been shown that the adsorption and the thickness of the adsorbed layer are determined by (i) the affinity for the surface, i.e., denser layer with an extrashort-ranged potential, and (ii) the distribution of the charges along the chain. If all the amino acids have a high affinity for the surface, the protein adsorbs in a train conformation, if the surface is negatively charged the protein adsorbs in a tail-train conformation, whereas if the surface is positively charged the protein adsorbs in a loop conformation. The latter gives rise to a more confined adsorbed layer.

Quantum annealing versus classical machine learning applied to a simplified computational biology problem

NASA Astrophysics Data System (ADS)

Li, Richard Y.; Di Felice, Rosa; Rohs, Remo; Lidar, Daniel A.

2018-03-01

Transcription factors regulate gene expression, but how these proteins recognize and specifically bind to their DNA targets is still debated. Machine learning models are effective means to reveal interaction mechanisms. Here we studied the ability of a quantum machine learning approach to classify and rank binding affinities. Using simplified data sets of a small number of DNA sequences derived from actual binding affinity experiments, we trained a commercially available quantum annealer to classify and rank transcription factor binding. The results were compared to state-of-the-art classical approaches for the same simplified data sets, including simulated annealing, simulated quantum annealing, multiple linear regression, LASSO, and extreme gradient boosting. Despite technological limitations, we find a slight advantage in classification performance and nearly equal ranking performance using the quantum annealer for these fairly small training data sets. Thus, we propose that quantum annealing might be an effective method to implement machine learning for certain computational biology problems.

Perceptions, training experiences, and preferences of surgical residents toward laparoscopic simulation training: a resident survey.

PubMed

Shetty, Shohan; Zevin, Boris; Grantcharov, Teodor P; Roberts, Kurt E; Duffy, Andrew J

2014-01-01

Simulation training for surgical residents can shorten learning curves, improve technical skills, and expedite competency. Several studies have shown that skills learned in the simulated environment are transferable to the operating room. Residency programs are trying to incorporate simulation into the resident training curriculum to supplement the hands-on experience gained in the operating room. Despite the availability and proven utility of surgical simulators and simulation laboratories, they are still widely underutilized by surgical trainees. Studies have shown that voluntary use leads to minimal participation in a training curriculum. Although there are several simulation tools, there is no clear evidence of the superiority of one tool over the other in skill acquisition. The purpose of this study was to explore resident perceptions, training experiences, and preferences regarding laparoscopic simulation training. Our goal was to profile resident participation in surgical skills simulation, recognize potential barriers to voluntary simulator use, and identify simulation tools and tasks preferred by residents. Furthermore, this study may help to inform whether mandatory/protected training time, as part of the residents' curriculum is essential to enhance participation in the simulation laboratory. A cross-sectional study on general surgery residents (postgraduate years 1-5) at Yale University School of Medicine and the University of Toronto via an online questionnaire was conducted. Overall, 67 residents completed the survey. The institutional review board approved the methods of the study. Overall, 95.5% of the participants believed that simulation training improved their laparoscopic skills. Most respondents (92.5%) perceived that skills learned during simulation training were transferrable to the operating room. Overall, 56.7% of participants agreed that proficiency in a simulation curriculum should be mandatory before operating room experience. The simulation laboratory was most commonly used during work hours; lack of free time during work hours was most commonly cited as a reason for underutilization. Factors influencing use of the simulation laboratory in order of importance were the need for skill development, an interest in minimally invasive surgery, mandatory/protected time in a simulation environment as part of the residency program curriculum, a recommendation by an attending surgeon, and proximity of the simulation center. The most preferred simulation tool was the live animal model followed by cadaveric tissue. Virtual reality simulators were among the least-preferred (25%) simulation tools. Most residents (91.0%) felt that mandatory/protected time in a simulation environment should be introduced into resident training protocols. Mandatory and protected time in a simulation environment as part of the resident training curriculum may improve participation in simulation training. A comprehensive curriculum, which includes the use of live animals, cadaveric tissue, and virtual reality simulators, may enhance the laparoscopic training experience and interest level of surgical trainees. Copyright © 2014 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Transfer of Complex Skill Learning from Virtual to Real Rowing

PubMed Central

Rauter, Georg; Sigrist, Roland; Koch, Claudio; Crivelli, Francesco; van Raai, Mark; Riener, Robert; Wolf, Peter

2013-01-01

Simulators are commonly used to train complex tasks. In particular, simulators are applied to train dangerous tasks, to save costs, and to investigate the impact of different factors on task performance. However, in most cases, the transfer of simulator training to the real task has not been investigated. Without a proof for successful skill transfer, simulators might not be helpful at all or even counter-productive for learning the real task. In this paper, the skill transfer of complex technical aspects trained on a scull rowing simulator to sculling on water was investigated. We assume if a simulator provides high fidelity rendering of the interactions with the environment even without augmented feedback, training on such a realistic simulator would allow similar skill gains as training in the real environment. These learned skills were expected to transfer to the real environment. Two groups of four recreational rowers participated. One group trained on water, the other group trained on a simulator. Within two weeks, both groups performed four training sessions with the same licensed rowing trainer. The development in performance was assessed by quantitative biomechanical performance measures and by a qualitative video evaluation of an independent, blinded trainer. In general, both groups could improve their performance on water. The used biomechanical measures seem to allow only a limited insight into the rowers' development, while the independent trainer could also rate the rowers' overall impression. The simulator quality and naturalism was confirmed by the participants in a questionnaire. In conclusion, realistic simulator training fostered skill gains to a similar extent as training in the real environment and enabled skill transfer to the real environment. In combination with augmented feedback, simulator training can be further exploited to foster motor learning even to a higher extent, which is subject to future work. PMID:24376518

Lack of transfer of skills after virtual reality simulator training with haptic feedback.

PubMed

Våpenstad, Cecilie; Hofstad, Erlend Fagertun; Bø, Lars Eirik; Kuhry, Esther; Johnsen, Gjermund; Mårvik, Ronald; Langø, Thomas; Hernes, Toril Nagelhus

2017-12-01

Virtual reality (VR) simulators enrich surgical training and offer training possibilities outside of the operating room (OR). In this study, we created a criterion-based training program on a VR simulator with haptic feedback and tested it by comparing the performances of a simulator group against a control group. Medical students with no experience in laparoscopy were randomly assigned to a simulator group or a control group. In the simulator group, the candidates trained until they reached predefined criteria on the LapSim ® VR simulator (Surgical Science AB, Göteborg, Sweden) with haptic feedback (Xitact TM IHP, Mentice AB, Göteborg, Sweden). All candidates performed a cholecystectomy on a porcine organ model in a box trainer (the clinical setting). The performances were video rated by two surgeons blinded to subject training status. In total, 30 students performed the cholecystectomy and had their videos rated (N = 16 simulator group, N = 14 control group). The control group achieved better video rating scores than the simulator group (p < .05). The criterion-based training program did not transfer skills to the clinical setting. Poor mechanical performance of the simulated haptic feedback is believed to have resulted in a negative training effect.

Clinical simulation training improves the clinical performance of Chinese medical students

PubMed Central

Zhang, Ming-ya; Cheng, Xin; Xu, An-ding; Luo, Liang-ping; Yang, Xuesong

2015-01-01

Background Modern medical education promotes medical students’ clinical operating capacity rather than the mastery of theoretical knowledge. To accomplish this objective, clinical skill training using various simulations was introduced into medical education to cultivate creativity and develop the practical ability of students. However, quantitative analysis of the efficiency of clinical skill training with simulations is lacking. Methods In the present study, we compared the mean scores of medical students (Jinan University) who graduated in 2013 and 2014 on 16 stations between traditional training (control) and simulative training groups. In addition, in a clinical skill competition, the objective structured clinical examination (OSCE) scores of participating medical students trained using traditional and simulative training were compared. The data were statistically analyzed and qualitatively described. Results The results revealed that simulative training could significantly enhance the graduate score of medical students compared with the control. The OSCE scores of participating medical students in the clinical skill competition, trained using simulations, were dramatically higher than those of students trained through traditional methods, and we also observed that the OSCE marks were significantly increased for the same participant after simulative training for the clinical skill competition. Conclusions Taken together, these data indicate that clinical skill training with a variety of simulations could substantially promote the clinical performance of medical students and optimize the resources used for medical education, although a precise analysis of each specialization is needed in the future. PMID:26478142

Addiction treatment staff perceptions of training as a facilitator or barrier to implementing evidence-based practices: a national qualitative research study.

PubMed

D'Ippolito, Melinda; Lundgren, Lena; Amodeo, Maryann; Beltrame, Clelia; Lim, Lynn; Chassler, Deborah

2015-01-01

This qualitative effort examines training-related facilitators and barriers to implementing evidence-based practices (EBPs) in 285 community-based addiction treatment organizations (CBOs) nationwide that were funded by the Substance Abuse and Mental Health Services Administration Center for Substance Abuse Treatment (SAMHSA/CSAT) to implement EBPs. Using qualitative interviews, the authors explored staff (N = 514) descriptions of training as a facilitator or barrier to implementation. Training-related factors were described 663 times as facilitators (by 440 staff) and 233 times as barriers (by 170 staff). Responses were coded using content analysis. Specific characteristics of the training received, such as access to expert knowledge and quality, as well as ongoing training were described as central facilitating factors to EBP implementation. Key reasons training was perceived as a barrier included the amount of training; the training did not fit current staff and/or organizational needs; the training for some EBPs was perceived to be too demanding; and the difficulty accessing training. Since government funders of addiction treatments require that CBOs implement EBPs and they provide training resources, the quality, flexibility, and accessibility of the available training needs to be promoted throughout the addiction treatment network. Only 17% of CBOs reported that they used the SAMHSA-funded ATTC (Addiction Technology Transfer Center) training centers and 42% used SAMHSA technical assistance. Hence, federally funded resources for training were not always used.

Simulators for Mariner Training and Licensing: Functional Specifications and Training Program Guidelines for a Maritime Cadet Simulator.

DTIC Science & Technology

1982-12-01

9 2 Criticality of Cadet Training Objectives .............................................. 10 3 Simulator Best, High ...simu- " The already high costs associated with at-sea training lator within the multiple media approach to cadet training have been escalating...Bridge Procedures. that color is desirable for high workloads; the additional cost for multicolor under nighttime conditions may not " Simulator

Virtual reality simulation training of mastoidectomy - studies on novice performance.

PubMed

Andersen, Steven Arild Wuyts

2016-08-01

Virtual reality (VR) simulation-based training is increasingly used in surgical technical skills training including in temporal bone surgery. The potential of VR simulation in enabling high-quality surgical training is great and VR simulation allows high-stakes and complex procedures such as mastoidectomy to be trained repeatedly, independent of patients and surgical tutors, outside traditional learning environments such as the OR or the temporal bone lab, and with fewer of the constraints of traditional training. This thesis aims to increase the evidence-base of VR simulation training of mastoidectomy and, by studying the final-product performances of novices, investigates the transfer of skills to the current gold-standard training modality of cadaveric dissection, the effect of different practice conditions and simulator-integrated tutoring on performance and retention of skills, and the role of directed, self-regulated learning. Technical skills in mastoidectomy were transferable from the VR simulation environment to cadaveric dissection with significant improvement in performance after directed, self-regulated training in the VR temporal bone simulator. Distributed practice led to a better learning outcome and more consolidated skills than massed practice and also resulted in a more consistent performance after three months of non-practice. Simulator-integrated tutoring accelerated the initial learning curve but also caused over-reliance on tutoring, which resulted in a drop in performance when the simulator-integrated tutor-function was discontinued. The learning curves were highly individual but often plateaued early and at an inadequate level, which related to issues concerning both the procedure and the VR simulator, over-reliance on the tutor function and poor self-assessment skills. Future simulator-integrated automated assessment could potentially resolve some of these issues and provide trainees with both feedback during the procedure and immediate assessment following each procedure. Standard setting by establishing a proficiency level that can be used for mastery learning with deliberate practice could also further sophisticate directed, self-regulated learning in VR simulation-based training. VR simulation-based training should be embedded in a systematic and competency-based training curriculum for high-quality surgical skills training, ultimately leading to improved safety and patient care.

Cost-effective and low-technology options for simulation and training in neonatology.

PubMed

Bruno, Christie J; Glass, Kristen M

2016-11-01

The purpose of this review is to explore low-cost options for simulation and training in neonatology. Numerous cost-effective options exist for simulation and training in neonatology. Lower cost options are available for teaching clinical skills and procedural training in neonatal intubation, chest tube insertion, and pericardiocentesis, among others. Cost-effective, low-cost options for simulation-based education can be developed and shared in order to optimize the neonatal simulation training experience. Copyright © 2016 Elsevier Inc. All rights reserved.

Development of the KOSMS management simulation training system and its application

NASA Astrophysics Data System (ADS)

Takatsu, Yoshiki

The use of games which simulate actual corporate management has recently become more common and is now utilized in various ways for in-house corporate training courses. KOSMS (Kobe Steel Management Simulation System), a training system designed to help improve the management skills of senior management staff, is a unique management simulation training system in which the participants, using personal computers, must make decisions concerning a variety of management activities, in simulated competition with other corporations. This report outlines the KOSMS system, and describes the basic structure and detailed contents of the management simulation models, and actual application of the KOSMS management simulation training.

Validation of the train energy and dynamics simulator (TEDS).

DOT National Transportation Integrated Search

2015-01-01

FRA has developed Train Energy and Dynamics Simulator (TEDS) based upon a longitudinal train dynamics and operations : simulation model which allows users to conduct safety and risk evaluations, incident investigations, studies of train operations, :...

Analysis of the times involved in processing and communication in a lower limb simulation system controlled by SEMG

NASA Astrophysics Data System (ADS)

Profumieri, A.; Bonell, C.; Catalfamo, P.; Cherniz, A.

2016-04-01

Virtual reality has been proposed for different applications, including the evaluation of new control strategies and training protocols for upper limb prostheses and for the study of new rehabilitation programs. In this study, a lower limb simulation environment commanded by surface electromyography signals is evaluated. The time delays generated by the acquisition and processing stages for the signals that would command the knee joint, were measured and different acquisition windows were analysed. The subjective perception of the quality of simulation was also evaluated when extra delays were added to the process. The results showed that the acquisition window is responsible for the longest delay. Also, the basic implemented processes allowed for the acquisition of three signal channels for commanding the simulation. Finally, the communication between different applications is arguably efficient, although it depends on the amount of data to be sent.

Retinal Image Simulation of Subjective Refraction Techniques

PubMed Central

Perches, Sara; Collados, M. Victoria; Ares, Jorge

2016-01-01

Refraction techniques make it possible to determine the most appropriate sphero-cylindrical lens prescription to achieve the best possible visual quality. Among these techniques, subjective refraction (i.e., patient’s response-guided refraction) is the most commonly used approach. In this context, this paper’s main goal is to present a simulation software that implements in a virtual manner various subjective-refraction techniques—including Jackson’s Cross-Cylinder test (JCC)—relying all on the observation of computer-generated retinal images. This software has also been used to evaluate visual quality when the JCC test is performed in multifocal-contact-lens wearers. The results reveal this software’s usefulness to simulate the retinal image quality that a particular visual compensation provides. Moreover, it can help to gain a deeper insight and to improve existing refraction techniques and it can be used for simulated training. PMID:26938648

Simulation-based training for nurses: Systematic review and meta-analysis.

PubMed

Hegland, Pål A; Aarlie, Hege; Strømme, Hilde; Jamtvedt, Gro

2017-07-01

Simulation-based training is a widespread strategy to improve health-care quality. However, its effect on registered nurses has previously not been established in systematic reviews. The aim of this systematic review is to evaluate effect of simulation-based training on nurses' skills and knowledge. We searched CDSR, DARE, HTA, CENTRAL, CINAHL, MEDLINE, Embase, ERIC, and SveMed+ for randomised controlled trials (RCT) evaluating effect of simulation-based training among nurses. Searches were completed in December 2016. Two reviewers independently screened abstracts and full-text, extracted data, and assessed risk of bias. We compared simulation-based training to other learning strategies, high-fidelity simulation to other simulation strategies, and different organisation of simulation training. Data were analysed through meta-analysis and narrative syntheses. GRADE was used to assess the quality of evidence. Fifteen RCTs met the inclusion criteria. For the comparison of simulation-based training to other learning strategies on nurses' skills, six studies in the meta-analysis showed a significant, but small effect in favour of simulation (SMD -1.09, CI -1.72 to -0.47). There was large heterogeneity (I 2 85%). For the other comparisons, there was large between-study variation in results. The quality of evidence for all comparisons was graded as low. The effect of simulation-based training varies substantially between studies. Our meta-analysis showed a significant effect of simulation training compared to other learning strategies, but the quality of evidence was low indicating uncertainty. Other comparisons showed inconsistency in results. Based on our findings simulation training appears to be an effective strategy to improve nurses' skills, but further good-quality RCTs with adequate sample sizes are needed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Diagnostic Performance 1 H after Simulation Training Predicts Learning

ERIC Educational Resources Information Center

Consoli, Anna; Fraser, Kristin; Ma, Irene; Sobczak, Matthew; Wright, Bruce; McLaughlin, Kevin

2013-01-01

Although simulation training improves post-training performance, it is unclear how well performance soon after simulation training predicts longer term outcomes (i.e., learning). Here our objective was to assess the predictive value of performance 1 h post-training of performance 6 weeks later. We trained 84 first year medical students a simulated…

14 CFR 121.407 - Training program: Approval of airplane simulators and other training devices.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Training program: Approval of airplane... Program § 121.407 Training program: Approval of airplane simulators and other training devices. Link to an amendment published at 78 FR 67836, Nov. 12, 2013. (a) Each airplane simulator and other training device...

From bricks to buildings: adapting the Medical Research Council framework to develop programs of research in simulation education and training for the health professions.

PubMed

Haji, Faizal A; Da Silva, Celina; Daigle, Delton T; Dubrowski, Adam

2014-08-01

Presently, health care simulation research is largely conducted on a study-by-study basis. Although such "project-based" research generates a plethora of evidence, it can be chaotic and contradictory. A move toward sustained, thematic, theory-based programs of research is necessary to advance knowledge in the field. Recognizing that simulation is a complex intervention, we present a framework for developing research programs in simulation-based education adapted from the Medical Research Council (MRC) guidance. This framework calls for an iterative approach to developing, refining, evaluating, and implementing simulation interventions. The adapted framework guidance emphasizes: (1) identification of theory and existing evidence; (2) modeling and piloting interventions to clarify active ingredients and identify mechanisms linking the context, intervention, and outcomes; and (3) evaluation of intervention processes and outcomes in both the laboratory and real-world setting. The proposed framework will aid simulation researchers in developing more robust interventions that optimize simulation-based education and advance our understanding of simulation pedagogy.

Video-based training of respite care providers: an interactional analysis of presentation format.

PubMed Central

Neef, N A; Trachtenberg, S; Loeb, J; Sterner, K

1991-01-01

We conducted two studies to evaluate a video-based instructional package for training respite care providers and the role of presentation format (viewing the videotapes alone, with a partner, and with structured group training) as a contextual variable. In Study 1, the results of a within-subjects Latin square design nested within a multiple baseline showed that performance during simulated (role-played) respite care situations improved in five of the six skill areas for the 12 trainees following presentation of the videotape, with no differences between presentation formats. Correct responding generalized to respite care situations involving a developmentally disabled child, and in most cases, acquired skills were maintained for up to 6 months. In Study 2, we conducted a clinical replication of Study 1 under conditions more closely approximating those in which the training program would be implemented by respite care agencies. Results of the between-groups analysis were consistent with the findings of Study 1. PMID:1836458

Distribution and Fate of Energetics on DoD Test and Training Ranges: Final Report

DTIC Science & Technology

2006-11-01

tests for unconfined charges........................................................ 106 Table 5-3. Mass (g) of residue generated by BIP of unfuzed anti...Lands Withdrawal Act (Public Law 106 -65). As a portion of this EIS, the Army has pledged to implement a program to identify possible munitions...containing Tritonal, PBXN -109, Composition H-6, and Composition B (Baker et al. 2000). Included in the list of simulated UXOs was the 155-mm, 105-mm, and 8

Improved Oversight, but No Invoice Reviews and Potential Antideficiency Act Violation May Have Occurred on the Kuwait Observer Controller Team Task Orders

DTIC Science & Technology

2012-08-02

Contracting, Program Executive Office for Simulation, Training, and Instrumentation; the Resident Auditor, Raytheon Network Centric Systems, Defense...Router Network (SIPRNET). We appreciate the courtesies extended to the staff. Please direct questions to Mr. Tim Moore at (703) 604-9068 (DSN 664...Raytheon Network Centric System Resident Office, DCAA, should develop and implement procedures to verify that the Army does not reimburse the contractor

Current status of endoscopic simulation in gastroenterology fellowship training programs.

PubMed

Jirapinyo, Pichamol; Thompson, Christopher C

2015-07-01

Recent guidelines have encouraged gastroenterology and surgical training programs to integrate simulation into their core endoscopic curricula. However, the role that simulation currently has within training programs is unknown. This study aims to assess the current status of simulation among gastroenterology fellowship programs. This questionnaire study consisted of 38 fields divided into two sections. The first section queried program directors' experience on simulation and assessed the current status of simulation at their institution. The second portion surveyed their opinion on the potential role of simulation on the training curriculum. The study was conducted at the 2013 American Gastroenterological Association Training Directors' Workshop in Phoenix, Arizona. The participants were program directors from Accreditation Council for Graduate Medical Education accredited gastroenterology training programs, who attended the workshop. The questionnaire was returned by 69 of 97 program directors (response rate of 71%). 42% of programs had an endoscopic simulator. Computerized simulators (61.5%) were the most common, followed by mechanical (30.8%) and animal tissue (7.7%) simulators, respectively. Eleven programs (15%) required fellows to use simulation prior to clinical cases. Only one program has a minimum number of hours fellows have to participate in simulation training. Current simulators are deemed as easy to use (76%) and good educational tools (65%). Problems are cost (72%) and accessibility (69%). The majority of program directors believe that there is a need for endoscopic simulator training, with only 8% disagreeing. Additionally, a majority believe there is a role for simulation prior to initiation of clinical cases with 15% disagreeing. Gastroenterology fellowship program directors widely recognize the importance of simulation. Nevertheless, simulation is used by only 42% of programs and only 15% of programs require that trainees use simulation prior to clinical cases. No programs currently use simulation as part of the evaluation process.

Communication and relationship skills for rapid response teams at hamilton health sciences.

PubMed

Cziraki, Karen; Lucas, Janie; Rogers, Toni; Page, Laura; Zimmerman, Rosanne; Hauer, Lois Ann; Daniels, Charlotte; Gregoroff, Susan

2008-01-01

Rapid response teams (RRT) are an important safety strategy in the prevention of deaths in patients who are progressively failing outside of the intensive care unit. The goal is to intervene before a critical event occurs. Effective teamwork and communication skills are frequently cited as critical success factors in the implementation of these teams. However, there is very little literature that clearly provides an education strategy for the development of these skills. Training in simulation labs offers an opportunity to assess and build on current team skills; however, this approach does not address how to meet the gaps in team communication and relationship skill management. At Hamilton Health Sciences (HHS) a two-day program was developed in collaboration with the RRT Team Leads, Organizational Effectiveness and Patient Safety Leaders. Participants reflected on their conflict management styles and considered how their personality traits may contribute to team function. Communication and relationship theories were reviewed and applied in simulated sessions in the relative safety of off-site team sessions. The overwhelming positive response to this training has been demonstrated in the incredible success of these teams from the perspective of the satisfaction surveys of the care units that call the team, and in the multi-phased team evaluation of their application to practice. These sessions offer a useful approach to the development of the soft skills required for successful RRT implementation.

Transfer of Training from Simulators to Operational Equipment--Are Simulators Effective?

ERIC Educational Resources Information Center

Thomson, Douglas R.

1989-01-01

Examines the degree of fidelity required of a computer simulation to ensure maximum transfer of training. Simulators used in the military services for training pilots are described; relationships between fidelity, transfer, and cost are explored; and feedback to the student and measures of training effectiveness are discussed. (nine references)…

[Training of resident physicians in the recognition and treatment of an anaphylaxis case in pediatrics with simulation models].

PubMed

Enríquez, Diego; Lamborizio, María J; Firenze, Lorena; Jaureguizar, María de la P; Díaz Pumará, Estanislao; Szyld, Edgardo

2017-08-01

To evaluate the performance of resident physicians in diagnosing and treating a case of anaphylaxis, six months after participating in simulation training exercises. Initially, a group of pediatric residents were trained using simulation techniques in the management of critical pediatric cases. Based on their performance in this exercise, participants were assigned to one of 3 groups. At six months post-training, 4 residents were randomly chosen from each group to be re-tested, using the same performance measure as previously used. During the initial training session, 56 of 72 participants (78%) correctly identified and treated the case. Six months after the initial training, all 12 (100%) resident physicians who were re-tested successfully diagnosed and treated the simulated anaphylaxis case. The training through simulation techniques allowed correction or optimization of the treatment of simulated anaphylaxis cases in resident physicians evaluated after 6 months of the initial training.

A neural network device for on-line particle identification in cosmic ray experiments

NASA Astrophysics Data System (ADS)

Scrimaglio, R.; Finetti, N.; D'Altorio, L.; Rantucci, E.; Raso, M.; Segreto, E.; Tassoni, A.; Cardarilli, G. C.

2004-05-01

On-line particle identification is one of the main goals of many experiments in space both for rare event studies and for optimizing measurements along the orbital trajectory. Neural networks can be a useful tool for signal processing and real time data analysis in such experiments. In this document we report on the performances of a programmable neural device which was developed in VLSI analog/digital technology. Neurons and synapses were accomplished by making use of Operational Transconductance Amplifier (OTA) structures. In this paper we report on the results of measurements performed in order to verify the agreement of the characteristic curves of each elementary cell with simulations and on the device performances obtained by implementing simple neural structures on the VLSI chip. A feed-forward neural network (Multi-Layer Perceptron, MLP) was implemented on the VLSI chip and trained to identify particles by processing the signals of two-dimensional position-sensitive Si detectors. The radiation monitoring device consisted of three double-sided silicon strip detectors. From the analysis of a set of simulated data it was found that the MLP implemented on the neural device gave results comparable with those obtained with the standard method of analysis confirming that the implemented neural network could be employed for real time particle identification.

Aircraft Simulators and Pilot Training.

ERIC Educational Resources Information Center

Caro, Paul W.

Flight simulators are built as realistically as possible, presumably to enhance their training value. Yet, their training value is determined by the way they are used. Traditionally, simulators have been less important for training than have aircraft, but they are currently emerging as primary pilot training vehicles. This new emphasis is an…

14 CFR 142.59 - Flight simulators and flight training devices.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Flight simulators and flight training... TRANSPORTATION (CONTINUED) SCHOOLS AND OTHER CERTIFICATED AGENCIES TRAINING CENTERS Personnel and Flight Training Equipment Requirements § 142.59 Flight simulators and flight training devices. (a) An applicant for, or...

14 CFR 142.59 - Flight simulators and flight training devices.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Flight simulators and flight training... TRANSPORTATION (CONTINUED) SCHOOLS AND OTHER CERTIFICATED AGENCIES TRAINING CENTERS Personnel and Flight Training Equipment Requirements § 142.59 Flight simulators and flight training devices. (a) An applicant for, or...

14 CFR 142.59 - Flight simulators and flight training devices.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Flight simulators and flight training... TRANSPORTATION (CONTINUED) SCHOOLS AND OTHER CERTIFICATED AGENCIES TRAINING CENTERS Personnel and Flight Training Equipment Requirements § 142.59 Flight simulators and flight training devices. (a) An applicant for, or...

14 CFR 142.59 - Flight simulators and flight training devices.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Flight simulators and flight training... TRANSPORTATION (CONTINUED) SCHOOLS AND OTHER CERTIFICATED AGENCIES TRAINING CENTERS Personnel and Flight Training Equipment Requirements § 142.59 Flight simulators and flight training devices. (a) An applicant for, or...

14 CFR 142.59 - Flight simulators and flight training devices.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Flight simulators and flight training... TRANSPORTATION (CONTINUED) SCHOOLS AND OTHER CERTIFICATED AGENCIES TRAINING CENTERS Personnel and Flight Training Equipment Requirements § 142.59 Flight simulators and flight training devices. (a) An applicant for, or...

Spatial Disorientation Training in the Rotor Wing Flight Simulator.

PubMed

Powell-Dunford, Nicole; Bushby, Alaistair; Leland, Richard A

This study is intended to identify efficacy, evolving applications, best practices, and challenges of spatial disorientation (SD) training in flight simulators for rotor wing pilots. Queries of a UK Ministry of Defense research database and Pub Med were undertaken using the search terms 'spatial disorientation,' 'rotor wing,' and 'flight simulator.' Efficacy, evolving applications, best practices, and challenges of SD simulation for rotor wing pilots were also ascertained through discussion with subject matter experts and industrial partners. Expert opinions were solicited at the aeromedical physiologist, aeromedical psychologist, instructor pilot, aeromedical examiner, and corporate executive levels. Peer review literature search yielded 129 articles, with 5 relevant to the use of flight simulators for the spatial disorientation training of rotor wing pilots. Efficacy of such training was measured subjectively and objectively. A preponderance of anecdotal reports endorse the benefits of rotor wing simulator SD training, with a small trial substantiating performance improvement. Advancing technologies enable novel training applications. The mobile nature of flight students and concurrent anticollision technologies can make long-range assessment of SD training efficacy challenging. Costs of advanced technologies could limit the extent to which the most advanced simulators can be employed across the rotor wing community. Evidence suggests the excellent training value of rotor wing simulators for SD training. Objective data from further research, particularly with regards to evolving technologies, may justify further usage of advanced simulator platforms for SD training and research. Powell-Dunford N, Bushby A, Leland RA. Spatial disorientation training in the rotor wing flight simulator. Aerosp Med Hum Perform. 2016; 87(10):890-893.

Comparison of Cardiopulmonary Resuscitation Quality Between Standard Versus Telephone-Basic Life Support Training Program in Middle-Aged and Elderly Housewives: A Randomized Simulation Study.

PubMed

Kim, Tae Han; Lee, Yu Jin; Lee, Eui Jung; Ro, Young Sun; Lee, KyungWon; Lee, Hyeona; Jang, Dayea Beatrice; Song, Kyoung Jun; Shin, Sang Do; Myklebust, Helge; Birkenes, Tonje Søraas

2018-02-01

For cardiac arrests witnessed at home, the witness is usually a middle-aged or older housewife. We compared the quality of cardiopulmonary resuscitation (CPR) performance of bystanders trained with the newly developed telephone-basic life support (T-BLS) program and those trained with standard BLS (S-BLS) training programs. Twenty-four middle-aged and older housewives without previous CPR education were enrolled and randomized into two groups of BLS training programs. The T-BLS training program included concepts and current instruction protocols for telephone-assisted CPR, whereas the S-BLS training program provided training for BLS. After each training course, the participants simulated CPR and were assisted by a dispatcher via telephone. Cardiopulmonary resuscitation quality was measured and recorded using a mannequin simulator. The primary outcome was total no-flow time (>1.5 seconds without chest compression) during simulation. Among 24 participants, two (8.3%) who experienced mechanical failure of simulation mannequin and one (4.2%) who violated simulation protocols were excluded at initial simulation, and two (8.3%) refused follow-up after 6 months. The median (interquartile range) total no-flow time during initial simulation was 79.6 (66.4-96.9) seconds for the T-BLS training group and 147.6 (122.5-184.0) seconds for the S-BLS training group (P < 0.01). Median cumulative interruption time and median number of interruption events during BLS at initial simulation and 6-month follow-up simulation were significantly shorter in the T-BLS than in the S-BLS group (1.0 vs. 9.5, P < 0.01, and 1.0 vs. 10.5, P = 0.02, respectively). Participants trained with the T-BLS training program showed shorter no-flow time and fewer interruptions during bystander CPR simulation assisted by a dispatcher.

Training Parent Implementation of Discrete-Trial Teaching: Effects on Generalization of Parent Teaching and Child Correct Responding

ERIC Educational Resources Information Center

Lafasakis, Michael; Sturmey, Peter

2007-01-01

Behavioral skills training was used to teach 3 parents to implement discrete-trial teaching with their children with developmental disabilities. Parents learned to implement discrete-trial training, their skills generalized to novel programs, and the children's correct responding increased, suggesting that behavioral skills training is an…

Integrating Soft Set Theory and Fuzzy Linguistic Model to Evaluate the Performance of Training Simulation Systems

PubMed Central

Chang, Kuei-Hu; Chang, Yung-Chia; Chain, Kai; Chung, Hsiang-Yu

2016-01-01

The advancement of high technologies and the arrival of the information age have caused changes to the modern warfare. The military forces of many countries have replaced partially real training drills with training simulation systems to achieve combat readiness. However, considerable types of training simulation systems are used in military settings. In addition, differences in system set up time, functions, the environment, and the competency of system operators, as well as incomplete information have made it difficult to evaluate the performance of training simulation systems. To address the aforementioned problems, this study integrated analytic hierarchy process, soft set theory, and the fuzzy linguistic representation model to evaluate the performance of various training simulation systems. Furthermore, importance–performance analysis was adopted to examine the influence of saving costs and training safety of training simulation systems. The findings of this study are expected to facilitate applying military training simulation systems, avoiding wasting of resources (e.g., low utility and idle time), and providing data for subsequent applications and analysis. To verify the method proposed in this study, the numerical examples of the performance evaluation of training simulation systems were adopted and compared with the numerical results of an AHP and a novel AHP-based ranking technique. The results verified that not only could expert-provided questionnaire information be fully considered to lower the repetition rate of performance ranking, but a two-dimensional graph could also be used to help administrators allocate limited resources, thereby enhancing the investment benefits and training effectiveness of a training simulation system. PMID:27598390

Integrating Soft Set Theory and Fuzzy Linguistic Model to Evaluate the Performance of Training Simulation Systems.

PubMed

Chang, Kuei-Hu; Chang, Yung-Chia; Chain, Kai; Chung, Hsiang-Yu

2016-01-01

The advancement of high technologies and the arrival of the information age have caused changes to the modern warfare. The military forces of many countries have replaced partially real training drills with training simulation systems to achieve combat readiness. However, considerable types of training simulation systems are used in military settings. In addition, differences in system set up time, functions, the environment, and the competency of system operators, as well as incomplete information have made it difficult to evaluate the performance of training simulation systems. To address the aforementioned problems, this study integrated analytic hierarchy process, soft set theory, and the fuzzy linguistic representation model to evaluate the performance of various training simulation systems. Furthermore, importance-performance analysis was adopted to examine the influence of saving costs and training safety of training simulation systems. The findings of this study are expected to facilitate applying military training simulation systems, avoiding wasting of resources (e.g., low utility and idle time), and providing data for subsequent applications and analysis. To verify the method proposed in this study, the numerical examples of the performance evaluation of training simulation systems were adopted and compared with the numerical results of an AHP and a novel AHP-based ranking technique. The results verified that not only could expert-provided questionnaire information be fully considered to lower the repetition rate of performance ranking, but a two-dimensional graph could also be used to help administrators allocate limited resources, thereby enhancing the investment benefits and training effectiveness of a training simulation system.

Simulator fidelity requirements : the case of platform motion

DOT National Transportation Integrated Search

1998-05-01

Today, the use of airplane simulators in pilot training and evaluation is universal. Simulators not only enable savings in training cost, but they have also practically eliminated training accidents for major airlines. They allow the training of emer...

Virtual reality simulator training of laparoscopic cholecystectomies - a systematic review.

PubMed

Ikonen, T S; Antikainen, T; Silvennoinen, M; Isojärvi, J; Mäkinen, E; Scheinin, T M

2012-01-01

Simulators are widely used in occupations where practice in authentic environments would involve high human or economic risks. Surgical procedures can be simulated by increasingly complex and expensive techniques. This review gives an update on computer-based virtual reality (VR) simulators in training for laparoscopic cholecystectomies. From leading databases (Medline, Cochrane, Embase), randomised or controlled trials and the latest systematic reviews were systematically searched and reviewed. Twelve randomised trials involving simulators were identified and analysed, as well as four controlled studies. Furthermore, seven studies comparing black boxes and simulators were included. The results indicated any kind of simulator training (black box, VR) to be beneficial at novice level. After VR training, novice surgeons seemed to be able to perform their first live cholecystectomies with fewer errors, and in one trial the positive effect remained during the first ten cholecystectomies. No clinical follow-up data were found. Optimal learning requires skills training to be conducted as part of a systematic training program. No data on the cost-benefit of simulators were found, the price of a VR simulator begins at EUR 60 000. Theoretical background to learning and limited research data support the use of simulators in the early phases of surgical training. The cost of buying and using simulators is justified if the risk of injuries and complications to patients can be reduced. Developing surgical skills requires repeated training. In order to achieve optimal learning a validated training program is needed.

Simulation training and resident performance of singleton vaginal breech delivery.

PubMed

Deering, Shad; Brown, Jill; Hodor, Jonathon; Satin, Andrew J

2006-01-01

To determine whether simulation training improves resident competency in the management of a simulated vaginal breech delivery. Without advance notice or training, residents from 2 obstetrics and gynecology residency programs participated in a standardized simulation scenario of management of an imminent term vaginal breech delivery. The scenario used an obstetric birth simulator and human actors, with the encounters digitally recorded. Residents then received a training session with the simulator on the proper techniques for vaginal breech delivery. Two weeks later they were retested using a similar simulation scenario. A physician, blinded to training status, graded the residents' performance using a standardized evaluation sheet. Statistical analysis included the Wilcoxon signed rank test, McNemar chi2, regression analysis, and paired t test as appropriate with a P value of less than .05 considered significant. Twenty residents from 2 institutions completed all parts of the study protocol. Trained residents had significantly higher scores in 8 of 12 critical delivery components (P < .05). Overall performance of the delivery and safety in performing the delivery also improved significantly (P = .001 for both). Simulation training improved resident performance in the management of a simulated vaginal breech delivery. Performance of a term breech vaginal delivery is well suited for simulation training, because it is uncommon and inevitable, and improper technique may result in significant injury. II-2.

Exploring the use of high-fidelity simulation training to enhance clinical skills.

PubMed

Ann Kirkham, Lucy

2018-02-07

The use of interprofessional simulation training to enhance nursing students' performance of technical and non-technical clinical skills is becoming increasingly common. Simulation training can involve the use of role play, virtual reality or patient simulator manikins to replicate clinical scenarios and assess the nursing student's ability to, for example, undertake clinical observations or work as part of a team. Simulation training enables nursing students to practise clinical skills in a safe environment. Effective simulation training requires extensive preparation, and debriefing is necessary following a simulated training session to review any positive or negative aspects of the learning experience. This article discusses a high-fidelity simulated training session that was used to assess a group of third-year nursing students and foundation level 1 medical students. This involved the use of a patient simulator manikin in a scenario that required the collaborative management of a deteriorating patient. ©2018 RCN Publishing Company Ltd. All rights reserved. Not to be copied, transmitted or recorded in any way, in whole or part, without prior permission of the publishers.

Using Simulation in Nursing PhD Education: Facilitating Application of Responsible Conduct of Research Principles.

PubMed

Clayton, Margaret F; Supiano, Katherine; Wilson, Rebecca; Lassche, Madeline; Latendresse, Gwen

Simulation is a standard clinical nursing educational approach; however, simulation is rarely used in nonclinical nursing education. In doctor of philosophy (PhD) programs, ethical content about responsible conduct of research (RCR) is traditionally didactic, presented early in the program of study. Ethics content merits review before students begin the dissertation phase; thus, the purpose of this project was to design and implement simulated scenarios to help students apply RCR principles prior to beginning independent research. Two scenarios were developed: (a) a potential protocol change discussed in a research team meeting and (b) an in-home data collection experience with an elderly participant and her daughter. Actors were trained faculty volunteers, playing roles outside their usual academic positions. Faculty facilitated scenarios by posing questions as cues related to desired learning outcomes as scenarios unfolded. Eleven nursing PhD students and 6 faculty participated. Debriefing facilitated discussion of RCR principles, common research quandaries, and suggested scenario revisions. Faculty, expert observation, and video-review showed that younger and less experienced students tried to give the "right" answer rather than implement RCR appropriate solutions. Students with more clinical experience had difficulty adopting the less familiar researcher role. Overall, simulation is a novel and useful way to enhance RCR content in PhD programs. Copyright © 2016 Elsevier Inc. All rights reserved.

The implementation research institute: training mental health implementation researchers in the United States

PubMed Central

2013-01-01

Background The Implementation Research Institute (IRI) provides two years of training in mental health implementation science for 10 new fellows each year. The IRI is supported by a National Institute of Mental Health (NIMH) R25 grant and the Department of Veterans Affairs (VA). Fellows attend two annual week-long trainings at Washington University in St. Louis. Training is provided through a rigorous curriculum, local and national mentoring, a ‘learning site visit’ to a federally funded implementation research project, pilot research, and grant writing. Methods This paper describes the rationale, components, outcomes to date, and participant experiences with IRI. Results IRI outcomes include 31 newly trained implementation researchers, their new grant proposals, contributions to other national dissemination and implementation research training, and publications in implementation science authored by the Core Faculty and fellows. Former fellows have obtained independent research funding in implementation science and are beginning to serve as mentors for more junior investigators. Conclusions Based on the number of implementation research grant proposals and papers produced by fellows to date, the IRI is proving successful in preparing new researchers who can inform the process of making evidence-based mental healthcare more available through real-world settings of care and who are advancing the field of implementation science. PMID:24007290

The flights before the flight - An overview of shuttle astronaut training

NASA Technical Reports Server (NTRS)

Sims, John T.; Sterling, Michael R.

1989-01-01

Space shuttle astronaut training is centered at NASA's Johnson Space Center in Houston, Texas. Each astronaut receives many different types of training from many sources. This training includes simulator training in the Shuttle Mission Simulator, in-flight simulator training in the Shuttle Training Aircraft, Extravehicular Activity training in the Weightless Environment Training Facility and a variety of lectures and briefings. Once the training program is completed each shuttle flight crew is well-prepared to perform the normal operations required for their flight and deal with any shuttle system malfunctions that might occur.

Unresolved Galaxy Classifier for ESA/Gaia mission: Support Vector Machines approach

NASA Astrophysics Data System (ADS)

Bellas-Velidis, Ioannis; Kontizas, Mary; Dapergolas, Anastasios; Livanou, Evdokia; Kontizas, Evangelos; Karampelas, Antonios

A software package Unresolved Galaxy Classifier (UGC) is being developed for the ground-based pipeline of ESA's Gaia mission. It aims to provide an automated taxonomic classification and specific parameters estimation analyzing Gaia BP/RP instrument low-dispersion spectra of unresolved galaxies. The UGC algorithm is based on a supervised learning technique, the Support Vector Machines (SVM). The software is implemented in Java as two separate modules. An offline learning module provides functions for SVM-models training. Once trained, the set of models can be repeatedly applied to unknown galaxy spectra by the pipeline's application module. A library of galaxy models synthetic spectra, simulated for the BP/RP instrument, is used to train and test the modules. Science tests show a very good classification performance of UGC and relatively good regression performance, except for some of the parameters. Possible approaches to improve the performance are discussed.

Research Workforce Diversity: The Case of Balancing National versus International Postdocs in US Biomedical Research.

PubMed

Ghaffarzadegan, Navid; Hawley, Joshua; Desai, Anand

2014-03-01

The US government has been increasingly supporting postdoctoral training in biomedical sciences to develop the domestic research workforce. However, current trends suggest that mostly international researchers benefit from the funding, many of whom might leave the USA after training. In this paper, we describe a model used to analyse the flow of national versus international researchers into and out of postdoctoral training. We calibrate our model in the case of the USA and successfully replicate the data. We use the model to conduct simulation-based analyses of effects of different policies on the diversity of postdoctoral researchers. Our model shows that capping the duration of postdoctoral careers, a policy proposed previously, favours international postdoctoral researchers. The analysis suggests that the leverage point to help the growth of domestic research workforce is in the pregraduate education area, and many policies implemented at the postgraduate level have minimal or unintended effects on diversity.

Multidisciplinary teamwork and communication training.

PubMed

Deering, Shad; Johnston, Lindsay C; Colacchio, Kathryn

2011-04-01

Every delivery is a multidisciplinary event, involving nursing, obstetricians, anesthesiologists, and pediatricians. Patients are often in labor across multiple provider shifts, necessitating numerous handoffs between teams. Each handoff provides an opportunity for errors. Although a traditional approach to improving patient outcomes has been to address individual knowledge and skills, it is now recognized that a significant number of complications result from team, rather than individual, failures. In 2004, a Sentinel Alert issued by the Joint Commission revealed that most cases of perinatal death and injury are caused by problems with an organization's culture and communication failures. It was recommended that hospitals implement teamwork training programs in an effort to improve outcomes. Instituting a multidisciplinary teamwork training program that uses simulation offers a risk-free environment to practice skills, including communication, role clarification, and mutual support. This experience should improve patient safety and outcomes, as well as enhance employee morale. Published by Elsevier Inc.

Evaluating the Implementation of Performance Improvement Training: The E[superscript 3] Process for Success

ERIC Educational Resources Information Center

Larbi-Apau, Josephine A.; Moseley, James L.

2008-01-01

This article provides a comprehensive approach to careful review and evaluation of the implementation of performance training intervention. It discusses the E[superscript 3] process for success, a basic framework for evaluating the implementation phase of a training program implemented as a broad-based performance improvement strategy. The intent…

14 CFR 135.339 - Initial and transition training and checking: Check airmen (aircraft), check airmen (simulator).

Code of Federal Regulations, 2011 CFR

2011-01-01

... an aircraft, in a flight simulator, or in a flight training device. This paragraph applies after... accomplished in full or in part in flight, in a flight simulator, or in a flight training device, as appropriate. (g) The initial and transition flight training for check airmen (simulator) must include the...

14 CFR 135.339 - Initial and transition training and checking: Check airmen (aircraft), check airmen (simulator).

Code of Federal Regulations, 2010 CFR

2010-01-01

... an aircraft, in a flight simulator, or in a flight training device. This paragraph applies after... accomplished in full or in part in flight, in a flight simulator, or in a flight training device, as appropriate. (g) The initial and transition flight training for check airmen (simulator) must include the...