Gamma model and its analysis for phase measuring profilometry.

PubMed

Liu, Kai; Wang, Yongchang; Lau, Daniel L; Hao, Qi; Hassebrook, Laurence G

2010-03-01

Phase measuring profilometry is a method of structured light illumination whose three-dimensional reconstructions are susceptible to error from nonunitary gamma in the associated optical devices. While the effects of this distortion diminish with an increasing number of employed phase-shifted patterns, gamma distortion may be unavoidable in real-time systems where the number of projected patterns is limited by the presence of target motion. A mathematical model is developed for predicting the effects of nonunitary gamma on phase measuring profilometry, while also introducing an accurate gamma calibration method and two strategies for minimizing gamma's effect on phase determination. These phase correction strategies include phase corrections with and without gamma calibration. With the reduction in noise, for three-step phase measuring profilometry, analysis of the root mean squared error of the corrected phase will show a 60x reduction in phase error when the proposed gamma calibration is performed versus 33x reduction without calibration.

Reliability and validity of the delta finger-to-palm (FTP), a new measure of finger range of motion in systemic sclerosis.

PubMed

Torok, Kathryn S; Baker, Nancy A; Lucas, Mary; Domsic, Robyn T; Boudreau, Robert; Medsger, Thomas A

2010-01-01

To determine the reliability and validity of a new measure of finger motion in patients with systemic sclerosis (SSc), the 'delta finger-topalm' (delta FTP) and compare its psychometric properties to the traditional measure of finger motion, the finger-topalm (FTP). Phase 1: The reliability of the delta FTP and FTP were examined in 39 patients with SSc. Phase 2: Criterion and convergent construct validity of both measures were examined in 17 patients with SSc by comparing them to other clinical measures: Total Active Range of Motion (TAROM), Hand Mobility in Scleroderma (HAMIS), the Duruoz Hand Index (DHI), Health Assessment Questionnaire (HAQ), and modified Rodnan skin score (mRSS). Phase 3: Sensitivity to change of the delta FTP was investigated in 24 patients with early diffuse cutaneous SSc. Both measures had excellent intra-rater and inter-rater reliability (ICC 0.92 to 0.99). Fair to strong correlations (rs=0.49-0.94) were observed between the delta FTP and TAROM, HAMIS, and DHI. Fair to moderate correlations were observed between delta FTP and HAQ components related to hand function and upper extremity mRSS. Correlations of the traditional FTP with these measures were fair to strong, but most often the delta FTP outperformed the FTP. The effect size and standardised response mean for the mean delta FTP were 0.50 and 1.10 respectively, over a 2-8 month period. The delta FTP is a valid and reliable measure of finger motion in patients with SSc which outperforms the FTP.

Reliability and validity of the delta finger-to-palm (FTP), a new measure of finger range of motion in systemic sclerosis

PubMed Central

Torok, Kathryn S.; Baker, Nancy A.; Lucas, Mary; Domsic, Robyn T.; Boudreau, Robert; Medsger, Thomas A.

2010-01-01

Objectives To determine the reliability and validity of a new measure of finger motion in patients with systemic sclerosis (SSc), the ‘delta finger-to-palm’ (delta FTP) and compare its psychometric properties to the traditional measure of finger motion, the finger-to-palm (FTP). Methods Phase 1: The reliability of the delta FTP and FTP were examined in 39 patients with SSc. Phase 2: Criterion and convergent construct validity of both measures were examined in 17 patients with SSc by comparing them to other clinical measures: Total Active Range of Motion (TAROM), Hand Mobility in Scleroderma (HAMIS), the Duruoz Hand Index (DHI), Health Assessment Questionnaire (HAQ), and modified Rodnan skin score (mRSS). Phase 3: Sensitivity to change of the delta FTP was investigated in 24 patients with early diffuse cutaneous SSc. Results Both measures had excellent intra-rater and inter-rater reliability (ICC 0.92 to 0.99). Fair to strong correlations (rs=0.49–0.94) were observed between the delta FTP and TAROM, HAMIS, and DHI. Fair to moderate correlations were observed between delta FTP and HAQ components related to hand function and upper extremity mRSS. Correlations of the traditional FTP with these measures were fair to strong, but most often the delta FTP outperformed the FTP. The effect size and standardised response mean for the mean delta FTP were 0.50 and 1.10 respectively, over a 2–8 month period. Conclusion The delta FTP is a valid and reliable measure of finger motion in patients with SSc which outperforms the FTP. PMID:20576211

Corroded surface roughness of copper analyzed by Fourier transform infrared mapping microscopy and optical profilometric study.

PubMed

Kasperek, J; Lefez, B; Beucher, E

2004-02-01

This study shows the effects of roughness on infrared spectra shapes of thin corrosion products on metallic substrates. The calculated spectra show that the baseline is mainly affected by increasing roughness and that such effects do not shift the position of the absorption bands. The model obtained has been used to extract data of artificial patina on a copper surface. Surface defects of copper substrates can be distinguished on the whole surface, from the morphological and chemical points of view, using optical profilometry and infrared microspectroscopy. An homogeneous layer of cuprite covers the surface except in the linear defects. Fourier transform infrared (FT-IR) analysis indicates that a mixture of atacamite and clinoatacamite is mainly located in these scratches. The width of these particular areas is in good agreement with profilometric observations.

Future Time Perspective Impacts Gain-Related but Not Loss-Related Intertemporal Choice.

PubMed

Li, Tian; Tan, Yuxin; Gong, Xianmin; Yin, Shufei; Qiu, Fangshu; Hu, Xue

2018-01-01

Future time perspective (FTP) modulates individuals' temporal orientation in selecting their motivations and goals, which widely influences their cognitions and behaviors. However, it remains unclear how FTP exactly affects intertemporal choice. To clarify the effect of FTP on intertemporal choice, 90 college students ( M age = 21.70, SD = 1.23) were randomly assigned to the limited FTP condition (16 males, 29 females) and the open-ended FTP condition (17 males, 28 females). In the limited FTP condition, participants were instructed to imagine their states of being 70 years old, whereas in the open-ended FTP condition, they were instructed to describe their current states. All participants then completed a series of intertemporal choice tasks, in which they chose from gain- and loss-related choices occurring at various time points. Results showed that the participants who received the future-imagining manipulation had more limited FTP compared with those who did not receive the manipulation, which confirmed the validity of the FTP manipulation. A 2 (FTP: limited vs. open-ended) × 2 (type of choice: gain vs. loss) repeated measures ANOVA on discount rate revealed a significant interaction between these two factors. The participants in the limited FTP condition had higher discount rates on gain-related choices but showed no difference on loss-related choices compared with the participants under the open-ended FTP condition. The results suggest that limited FTP could lower individuals' future orientation (i.e., willingness to delay an outcome) on gain-related, but not on loss-related, intertemporal decision-making.

Future Time Perspective Impacts Gain-Related but Not Loss-Related Intertemporal Choice

PubMed Central

Li, Tian; Tan, Yuxin; Gong, Xianmin; Yin, Shufei; Qiu, Fangshu; Hu, Xue

2018-01-01

Future time perspective (FTP) modulates individuals’ temporal orientation in selecting their motivations and goals, which widely influences their cognitions and behaviors. However, it remains unclear how FTP exactly affects intertemporal choice. To clarify the effect of FTP on intertemporal choice, 90 college students (Mage = 21.70, SD = 1.23) were randomly assigned to the limited FTP condition (16 males, 29 females) and the open-ended FTP condition (17 males, 28 females). In the limited FTP condition, participants were instructed to imagine their states of being 70 years old, whereas in the open-ended FTP condition, they were instructed to describe their current states. All participants then completed a series of intertemporal choice tasks, in which they chose from gain- and loss-related choices occurring at various time points. Results showed that the participants who received the future-imagining manipulation had more limited FTP compared with those who did not receive the manipulation, which confirmed the validity of the FTP manipulation. A 2 (FTP: limited vs. open-ended) × 2 (type of choice: gain vs. loss) repeated measures ANOVA on discount rate revealed a significant interaction between these two factors. The participants in the limited FTP condition had higher discount rates on gain-related choices but showed no difference on loss-related choices compared with the participants under the open-ended FTP condition. The results suggest that limited FTP could lower individuals’ future orientation (i.e., willingness to delay an outcome) on gain-related, but not on loss-related, intertemporal decision-making. PMID:29695989

Is fetal-type posterior cerebral artery a risk factor for intracranial aneurysm as analyzed by multislice CT angiography?

PubMed

He, Zhen; Wan, Yeda

2018-01-01

Fetal-type posterior cerebral artery (FTP) is a common anatomic variation that is closely associated with intracranial aneurysm. In the present study, multislice computed tomography angiography (CTA) was performed to assess whether FTP is a risk factor for intracranial aneurysm. CTA data of 364 consecutive cases of patients who were suspected with cerebrovascular disease or intracranial aneurysm of intracranial artery from 2013 to 2016 were reviewed and the incidence rates of FTP, other variations of the circle of Willis, intracranial aneurysm and FTP with intracranial aneurysm were evaluated. The χ 2 test was used to assess the influence of FTP and gender on the incidence rates of other variations of the circle of Willis, intracranial aneurysm and internal carotid artery-posterior communicating artery (ICA-PComA) aneurysm. Binary logistic regression analysis was performed to assess the associations of FTP and gender with intracranial aneurysm and ICA-PComA aneurysm. Compared with non-FTP patients, FTP cases exhibited significantly higher rates of other variations of the circle of Willis (χ 2 =80.173, P<0.001) and ICA-PComA aneurysm (χ 2 =4.437, P=0.035). Among patients with FTP and bilateral FTP, more female than male patients with intracranial aneurysm were identified. However, among all patients with intracranial aneurysm, no statistically significant differences in the prevalence of FTP (χ 2 =2.577, P=0.108) and bilateral FTP (χ 2 =2.199, P=0.159) between males and females were identified. Binary logistic regression analysis revealed that FTP and gender were risk factors for intracranial aneurysm and ICA-PComA aneurysm. A moderate association between FTP and ICA-PComA aneurysm (OR=2.762) were identified, although there was a weak association between FTP and intracranial aneurysm [odds ratio (OR)=1.365]. Furthermore, a strong association was identified between gender and intracranial aneurysm (OR=0.328), and a moderate association existed between gender and ICA-PComA aneurysm (OR=0.357). In conclusion, female gender is an independent risk factor for intracranial aneurysm, and FTP and female gender are independent risk factors for ICA-PComA aneurysm.

Is fetal-type posterior cerebral artery a risk factor for intracranial aneurysm as analyzed by multislice CT angiography?

PubMed Central

He, Zhen; Wan, Yeda

2018-01-01

Fetal-type posterior cerebral artery (FTP) is a common anatomic variation that is closely associated with intracranial aneurysm. In the present study, multislice computed tomography angiography (CTA) was performed to assess whether FTP is a risk factor for intracranial aneurysm. CTA data of 364 consecutive cases of patients who were suspected with cerebrovascular disease or intracranial aneurysm of intracranial artery from 2013 to 2016 were reviewed and the incidence rates of FTP, other variations of the circle of Willis, intracranial aneurysm and FTP with intracranial aneurysm were evaluated. The χ2 test was used to assess the influence of FTP and gender on the incidence rates of other variations of the circle of Willis, intracranial aneurysm and internal carotid artery-posterior communicating artery (ICA-PComA) aneurysm. Binary logistic regression analysis was performed to assess the associations of FTP and gender with intracranial aneurysm and ICA-PComA aneurysm. Compared with non-FTP patients, FTP cases exhibited significantly higher rates of other variations of the circle of Willis (χ2=80.173, P<0.001) and ICA-PComA aneurysm (χ2=4.437, P=0.035). Among patients with FTP and bilateral FTP, more female than male patients with intracranial aneurysm were identified. However, among all patients with intracranial aneurysm, no statistically significant differences in the prevalence of FTP (χ2=2.577, P=0.108) and bilateral FTP (χ2=2.199, P=0.159) between males and females were identified. Binary logistic regression analysis revealed that FTP and gender were risk factors for intracranial aneurysm and ICA-PComA aneurysm. A moderate association between FTP and ICA-PComA aneurysm (OR=2.762) were identified, although there was a weak association between FTP and intracranial aneurysm [odds ratio (OR)=1.365]. Furthermore, a strong association was identified between gender and intracranial aneurysm (OR=0.328), and a moderate association existed between gender and ICA-PComA aneurysm (OR=0.357). In conclusion, female gender is an independent risk factor for intracranial aneurysm, and FTP and female gender are independent risk factors for ICA-PComA aneurysm. PMID:29434687

Acoustic microscopy analyses to determine good vs. failed tissue engineered oral mucosa under normal or thermally stressed culture conditions.

PubMed

Winterroth, Frank; Lee, Junho; Kuo, Shiuhyang; Fowlkes, J Brian; Feinberg, Stephen E; Hollister, Scott J; Hollman, Kyle W

2011-01-01

This study uses scanning acoustic microscopy (SAM) ultrasonic profilometry to determine acceptable vs. failed tissue engineered oral mucosa. Specifically, ex vivo-produced oral mucosal equivalents (EVPOMEs) under normal or thermally stressed culture conditions were scanned with the SAM operator blinded to the culture conditions. As seeded cells proliferate, they fill in and smooth out the surface irregularities; they then stratify and produce a keratinized protective upper layer. Some of these transformations could alter backscatter of ultrasonic signals and in the case of the thermally stressed cells, produce backscatter similar to an unseeded device. If non-invasive ultrasonic monitoring could be developed, then tissue cultivation could be adjusted to measure biological variations in the stratified surface. To create an EVPOME device, oral mucosa keratinocytes were seeded onto acellular cadaveric dermis. Two sets of EVPOMEs were cultured: one at physiological temperature 37 °C and the other at 43 °C. The specimens were imaged with SAM consisting of a single-element transducer: 61 MHz center frequency, 32 MHz bandwidth, 1.52 f#. Profilometry for the stressed and unseeded specimens showed higher surface irregularities compared to unstressed specimens. Elevated thermal stress retards cellular differentiation, increasing root mean square values; these results show that SAM can potentially monitor cell/tissue development.

The contribution of posterior circulation to memory function during the intracarotid amobarbital procedure.

PubMed

Zijlmans, M; Huibers, C J A; Huiskamp, G J; de Kort, G A P; Alpherts, W C J; Leijten, F S S; Hendrikse, J

2012-08-01

The purpose of this study was to evaluate the contribution of posterior circulation to memory function by comparing memory scores between patients with and without a foetal-type posterior cerebral artery (FTP) during the intracarotid amobarbital procedure (IAP) in epilepsy patients. Patients undergoing bilateral IAP between January 2004 and January 2010 were retrospectively included. Pre-test angiograms were assessed for the presence of a FTP. Memory function scores (% correct) after right and left injections were obtained. Functional significance of FTP was affirmed by relative occipital versus parietal EEG slow-wave increase during IAP. Memory and EEG scores were compared between patients with and without FTP (Mann-Whitney U test). A total of 106 patients were included, 73 with posterior cerebral arteries (PCA) without FTP ('non-FTP'), 28 patients with unilateral FTP and 5 with a bilateral FTP. Memory scores were lower when amytal was injected to the hemisphere contralateral to the presumed seizure focus (on the right decreasing from 98.3 to 59.1, and on the left decreasing from 89.1 to 72.4; p < 0.001). When IAP was performed on the side of FTP memory scores were significantly lower (70.8) compared to non-FTP (82.0; p = 0.02). Relative occipital EEG changes were 0.44 for FTP cases and 0.36 for non-FTP patients (p = 0.01). A relationship between vasculature and brain function was demonstrated by lower memory scores and more slow-wave activity on occipital EEG during IAP in patients with foetal-type PCA compared to patients with non-FTP. This suggests an important contribution of brain areas supplied by the PCA to memory function.

40 CFR 600.113-08 - Fuel economy calculations for FTP, HFET, US06, SC03 and cold temperature FTP tests.

Code of Federal Regulations, 2013 CFR

2013-07-01

... EMISSIONS OF MOTOR VEHICLES Fuel Economy and Carbon-Related Exhaust Emission Test Procedures § 600.113-08 Fuel economy calculations for FTP, HFET, US06, SC03 and cold temperature FTP tests. The Administrator... specific gravity, carbon weight fraction and net heating value of the test fuel must be determined. The FTP...

Error analysis and correction of lever-type stylus profilometer based on Nelder-Mead Simplex method

NASA Astrophysics Data System (ADS)

Hu, Chunbing; Chang, Suping; Li, Bo; Wang, Junwei; Zhang, Zhongyu

2017-10-01

Due to the high measurement accuracy and wide range of applications, lever-type stylus profilometry is commonly used in industrial research areas. However, the error caused by the lever structure has a great influence on the profile measurement, thus this paper analyzes the error of high-precision large-range lever-type stylus profilometry. The errors are corrected by the Nelder-Mead Simplex method, and the results are verified by the spherical surface calibration. It can be seen that this method can effectively reduce the measurement error and improve the accuracy of the stylus profilometry in large-scale measurement.

Real-Time Laser Ultrasound Tomography for Profilometry of Solids

NASA Astrophysics Data System (ADS)

Zarubin, V. P.; Bychkov, A. S.; Karabutov, A. A.; Simonova, V. A.; Kudinov, I. A.; Cherepetskaya, E. B.

2018-01-01

We studied the possibility of applying laser ultrasound tomography for profilometry of solids. The proposed approach provides high spatial resolution and efficiency, as well as profilometry of contaminated objects or objects submerged in liquids. The algorithms for the construction of tomograms and recognition of the profiles of studied objects using the parallel programming technology NDIVIA CUDA are proposed. A prototype of the real-time laser ultrasound profilometer was used to obtain the profiles of solid surfaces of revolution. The proposed method allows the real-time determination of the surface position for cylindrical objects with an approximation accuracy of up to 16 μm.

Profilometry of three-dimensional discontinuous solids by combining two-steps temporal phase unwrapping, co-phased profilometry and phase-shifting interferometry

NASA Astrophysics Data System (ADS)

Servin, Manuel; Padilla, Moises; Garnica, Guillermo; Gonzalez, Adonai

2016-12-01

In this work we review and combine two techniques that have been recently published for three-dimensional (3D) fringe projection profilometry and phase unwrapping, namely: co-phased profilometry and 2-steps temporal phase-unwrapping. By combining these two methods we get a more accurate, higher signal-to-noise 3D profilometer for discontinuous industrial objects. In single-camera single-projector (standard) profilometry, the camera and the projector must form an angle between them. The phase-sensitivity of the profilometer depends on this angle, so it cannot be avoided. This angle produces regions with self-occluding shadows and glare from the solid as viewed from the camera's perspective, making impossible the demodulation of the fringe-pattern there. In other words, the phase data is undefined at those shadow regions. As published recently, this limitation can be solved by using several co-phased fringe-projectors and a single camera. These co-phased projectors are positioned at different directions towards the object, and as a consequence most shadows are compensated. In addition to this, most industrial objects are highly discontinuous, which precludes the use of spatial phase-unwrappers. One way to avoid spatial unwrapping is to decrease the phase-sensitivity to a point where the demodulated phase is bounded to one lambda, so the need for phase-unwrapping disappears. By doing this, however, the recovered non-wrapped phase contains too much harmonic distortion and noise. Using our recently proposed two-step temporal phase-unwrapping technique, the high-sensitivity phase is unwrapped using the low-frequency one as initial gross estimation. This two-step unwrapping technique solves the 3D object discontinuities while keeping the accuracy of the high-frequency profilometry data. In scientific research, new art are derived as logical and consistent result of previous efforts in the same direction. Here we present a new 3D-profilometer combining these two recently published methods: co-phased profilometry and two-steps temporal phase-unwrapping. By doing this, we obtain a new and more powerful 3D profilometry technique which overcomes the two main limitations of previous fringe-projection profilometers namely: high phase-sensitivity digitalization of discontinuous objects and solid's self-generated shadow minimization. This new 3D profilometer is demonstrated by an experiment digitizing a discontinuous 3D industrial-solid where the advantages of this new profilometer with respect to previous art are clearly shown.

Future time perspective: A systematic review and meta-analysis.

PubMed

Kooij, Dorien T A M; Kanfer, Ruth; Betts, Matt; Rudolph, Cort W

2018-04-23

The ability to foresee, anticipate, and plan for future desired outcomes is crucial for well-being, motivation, and behavior. However, theories in organizational psychology do not incorporate time-related constructs such as Future Time Perspective (FTP), and research on FTP remains disjointed and scattered, with different domains focusing on different aspects of the construct, using different measures, and assessing different antecedents and consequences. In this review and meta-analysis, we aim to clarify the FTP construct, advance its theoretical development, and demonstrate its importance by (a) integrating theory and empirical findings across different domains of research to identify major outcomes and antecedents of FTP, and (b) empirically examining whether and how these variables are moderated by FTP measures and dimensions. Results of a meta-analysis of k = 212 studies reveal significant relationships between FTP and major classes of consequences (i.e., those related to achievement, well-being, health behavior, risk behavior, and retirement planning), and between antecedents and FTP, as well as moderating effects of different FTP measures and dimensions. Highlighting the importance of FTP for organizational psychology theories, our findings demonstrate that FTP predicts these outcomes over and above the big five personality traits and mediates the associations between these personality traits and outcomes. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

STM imaging ortho- and para-fluorothiophenol self-assembled monolayers on Au(111).

PubMed

Jiang, Peng; Deng, Ke; Fichou, Denis; Xie, Si-Shen; Nion, Aymeric; Wang, Chen

2009-05-05

Self-assembled monolayers (SAMs) of para- and ortho-fluorothiophenol (p- and o-FTP) spontaneously formed on Au(111) substrate have been contrasted through investigation by a scanning tunneling microscope (STM) at room temperature. High-resolution STM imaging reveals that p-FTP adopts a 6 x radical3R30 degrees molecule arrangement containing six molecules. Two different kinds of p-FTP molecule dimer line structures have been formed on Au(111) by intermolecular pi-pi stacking along 112 substrate directions, besides a single p-FTP molecule line. In contrast, o-FTP molecules self-assemble into a much looser wave-like SAM, which can be described as a 5 x 3 radical3R30 degrees structure containing two molecules. Periodic density functional theory (DFT) calculations for the two systems suggest that these kinds of FTP molecules preferentially take the asymmetrical positions between 3-fold face-centered cubic (fcc) hollow and bridge sites on Au(111), tilting from the substrate surface. Theoretical simulation gives apparent average tilted angles of 58 degrees and 68 degrees for p-FTP and o-FTP with respect to the surface normal, respectively. This simulation shows that o-FTP is more inclined to lie down toward the Au(111) surface compared to p-FTP. The difference between p-FTP and o-FTP SAM structures can be qualitatively understood in terms of the variation of intermolecular dipole-dipole orientation. This suggests that, besides well-known Au-S and pi-pi interactions, electrostatic interactions including dipole-dipole, quadrupole-quadrupole, and dipole-quadrupole interactions might also play an important role in influencing the SAM structures formed by aromatic thiols with a permanent dipole moment.

Networked Resources.

ERIC Educational Resources Information Center

Nickerson, Gord

1991-01-01

Explains File Transfer Protocol (FTP), an application software program that allows a user to transfer files from one computer to another. The benefit of the rapid operating speed of FTP is discussed, the use of FTP on microcomputers, minicomputers, and workstations is described, and FTP problems are considered. (four references) (LRW)

Scalability Analysis and Use of Compression at the Goddard DAAC and End-to-End MODIS Transfers

NASA Technical Reports Server (NTRS)

Menasce, Daniel A.

1998-01-01

The goal of this task is to analyze the performance of single and multiple FTP transfer between SCF's and the Goddard DAAC. We developed an analytic model to compute the performance of FTP sessions as a function of various key parameters, implemented the model as a program called FTP Analyzer, and carried out validations with real data obtained by running single and multiple FTP transfer between GSFC and the Miami SCF. The input parameters to the model include the mix to FTP sessions (scenario), and for each FTP session, the file size. The network parameters include the round trip time, packet loss rate, the limiting bandwidth of the network connecting the SCF to a DAAC, TCP's basic timeout, TCP's Maximum Segment Size, and TCP's Maximum Receiver's Window Size. The modeling approach used consisted of modeling TCP's overall throughput, computing TCP's delay per FTP transfer, and then solving a queuing network model that includes the FTP clients and servers.

Friedman tongue position: age distribution and relationship to sleep-disordered breathing.

PubMed

Ingram, David G; Ruiz, Amanda; Friedman, Norman R

2015-05-01

Friedman tongue position (FTP) may play an important role in the evaluation of children with sleep-related breathing disorders (SRBD), but there are no previous data on FTP distribution by age. The objective of the current study was to determine the distribution of FTP by age and examine the relationship between FTP and snoring in children. Prospective cross-sectional study of 199 children (mean age, 6.8 years; 59% male) had tongue position assessed by FTP as part of their clinical examination of the oral cavity during routine ENT visits at a tertiary care children's hospital. The FTP and snoring frequency of participants was examined across the entire age range as well as by comparing those older (middle childhood and above) and younger than 5 years of age. Tongue position did not correlate with age or snoring frequency. The proportion of children with FTP III/IV was not significantly different in children younger than five years of age compared to older than five. Habitual snoring was not associated with having a higher FTP. Among children who snored <3 times per week, those who had previously undergone tonsillectomy did have higher FTP compared to those who had not (p=0.007). BMI-%-for-age was significantly correlated with FTP (p=0.003). The percent of children having FTP class III/IV differed significantly between ethnicities (22% of whites, 26% of others, 45% of hispanics, 53% of African-Americans; p=0.011). Inter-rater reliability among pediatric otolaryngologist was excellent (kappa=0.93, p<0.001). There does not appear to be an association between FTP with age or snoring frequency in children. The excellent inter-rater reliability for FTP among pediatric ENT providers suggests the null findings are not due to rater bias. These findings may serve as an important reference for those studying the role of tongue position in pediatric SRBD and complement previous studies examining FTP among children with known OSA or snoring. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Frutapin, a lectin from Artocarpus incisa (breadfruit): cloning, expression and molecular insights.

PubMed

de Sousa, Felipe Domingos; da Silva, Bruno Bezerra; Furtado, Gilvan Pessoa; Carneiro, Igor de Sa; Lobo, Marina Duarte Pinto; Guan, Yiwei; Guo, Jingxu; Coker, Alun R; Lourenzoni, Marcos Roberto; Guedes, Maria Izabel Florindo; Owen, James S; Abraham, David J; Monteiro-Moreira, Ana Cristina de Oliveira; Moreira, Renato de Azevedo

2017-08-31

Artocarpus incisa (breadfruit) seeds contain three different lectins (Frutalin, Frutapin (FTP) and Frutackin) with distinct carbohydrate specificities. The most abundant lectin is Frutalin, an α-D-galactose-specific carbohydrate-binding glycoprotein with antitumour properties and potential for tumour biomarker discovery as already reported. FTP is the second most abundant, but proved difficult to purify with very low yields and contamination with Frutalin frustrating its characterization. Here, we report for the first time high-level production and isolation of biologically active recombinant FTP in Escherichia coli BL21, optimizing conditions with the best set yielding >40 mg/l culture of soluble active FTP. The minimal concentration for agglutination of red blood cells was 62.5 µg/ml of FTP, a process effectively inhibited by mannose. Apo-FTP, FTP-mannose and FTP-glucose crystals were obtained, and they diffracted X-rays to a resolution of 1.58 (P2 1 2 1 2 1 ), 1.70 (P3 1 21) and 1.60 (P3 1 21) Å respectively. The best solution showed four monomers per asymmetric unit. Molecular dynamics (MD) simulation suggested that FTP displays higher affinity for mannose than glucose. Cell studies revealed that FTP was non-cytotoxic to cultured mouse fibroblast 3T3 cells below 0.5 mg/ml and was also capable of stimulating cell migration at 50 µg/ml. In conclusion, our optimized expression system allowed high amounts of correctly folded soluble FTP to be isolated. This recombinant bioactive lectin will now be tested in future studies for therapeutic potential; for example in wound healing and tissue regeneration. © 2017 The Author(s).

The Historian and Electronic Research: File Transfer Protocol (FTP).

ERIC Educational Resources Information Center

McCarthy, Michael J.

1993-01-01

Asserts that the Internet will become the academic communication medium for historians in the 1990s. Describes the "file transfer protocol" (FTP) access approach to the Internet and discusses its significant for historical research. Includes instructions for using FTP and a list of history-related FTP sites. (CFR)

Depth Profilometry via Multiplexed Optical High-Coherence Interferometry

PubMed Central

Kazemzadeh, Farnoud; Wong, Alexander; Behr, Bradford B.; Hajian, Arsen R.

2015-01-01

Depth Profilometry involves the measurement of the depth profile of objects, and has significant potential for various industrial applications that benefit from non-destructive sub-surface profiling such as defect detection, corrosion assessment, and dental assessment to name a few. In this study, we investigate the feasibility of depth profilometry using an Multiplexed Optical High-coherence Interferometry MOHI instrument. The MOHI instrument utilizes the spatial coherence of a laser and the interferometric properties of light to probe the reflectivity as a function of depth of a sample. The axial and lateral resolutions, as well as imaging depth, are decoupled in the MOHI instrument. The MOHI instrument is capable of multiplexing interferometric measurements into 480 one-dimensional interferograms at a location on the sample and is built with axial and lateral resolutions of 40 μm at a maximum imaging depth of 700 μm. Preliminary results, where a piece of sand-blasted aluminum, an NBK7 glass piece, and an optical phantom were successfully probed using the MOHI instrument to produce depth profiles, demonstrate the feasibility of such an instrument for performing depth profilometry. PMID:25803289

Depth profilometry via multiplexed optical high-coherence interferometry.

PubMed

Kazemzadeh, Farnoud; Wong, Alexander; Behr, Bradford B; Hajian, Arsen R

2015-01-01

Depth Profilometry involves the measurement of the depth profile of objects, and has significant potential for various industrial applications that benefit from non-destructive sub-surface profiling such as defect detection, corrosion assessment, and dental assessment to name a few. In this study, we investigate the feasibility of depth profilometry using an Multiplexed Optical High-coherence Interferometry MOHI instrument. The MOHI instrument utilizes the spatial coherence of a laser and the interferometric properties of light to probe the reflectivity as a function of depth of a sample. The axial and lateral resolutions, as well as imaging depth, are decoupled in the MOHI instrument. The MOHI instrument is capable of multiplexing interferometric measurements into 480 one-dimensional interferograms at a location on the sample and is built with axial and lateral resolutions of 40 μm at a maximum imaging depth of 700 μm. Preliminary results, where a piece of sand-blasted aluminum, an NBK7 glass piece, and an optical phantom were successfully probed using the MOHI instrument to produce depth profiles, demonstrate the feasibility of such an instrument for performing depth profilometry.

A Profilometry-Based Dentifrice Abrasion Method for V8 Brushing Machines Part II: Comparison of RDA-PE and Radiotracer RDA Measures.

PubMed

Schneiderman, Eva; Colón, Ellen; White, Donald J; St John, Samuel

2015-01-01

The purpose of this study was to compare the abrasivity of commercial dentifrices by two techniques: the conventional gold standard radiotracer-based Radioactive Dentin Abrasivity (RDA) method; and a newly validated technique based on V8 brushing that included a profilometry-based evaluation of dentin wear. This profilometry-based method is referred to as RDA-Profilometry Equivalent, or RDA-PE. A total of 36 dentifrices were sourced from four global dentifrice markets (Asia Pacific [including China], Europe, Latin America, and North America) and tested blindly using both the standard radiotracer (RDA) method and the new profilometry method (RDA-PE), taking care to follow specific details related to specimen preparation and treatment. Commercial dentifrices tested exhibited a wide range of abrasivity, with virtually all falling well under the industry accepted upper limit of 250; that is, 2.5 times the level of abrasion measured using an ISO 11609 abrasivity reference calcium pyrophosphate as the reference control. RDA and RDA-PE comparisons were linear across the entire range of abrasivity (r2 = 0.7102) and both measures exhibited similar reproducibility with replicate assessments. RDA-PE assessments were not just linearly correlated, but were also proportional to conventional RDA measures. The linearity and proportionality of the results of the current study support that both methods (RDA or RDA-PE) provide similar results and justify a rationale for making the upper abrasivity limit of 250 apply to both RDA and RDA-PE.

An Iterative O-Methyltransferase Catalyzes 1,11-Dimethylation of Aspergillus fumigatus Fumaric Acid Amides.

PubMed

Kalb, Daniel; Heinekamp, Thorsten; Schieferdecker, Sebastian; Nett, Markus; Brakhage, Axel A; Hoffmeister, Dirk

2016-10-04

S-adenosyl-l-methionine (SAM)-dependent methyltransfer is a common biosynthetic strategy to modify natural products. We investigated the previously uncharacterized Aspergillus fumigatus methyltransferase FtpM, which is encoded next to the bimodular fumaric acid amide synthetase FtpA. Structure elucidation of two new A. fumigatus natural products, the 1,11-dimethyl esters of fumaryl-l-tyrosine and fumaryl-l-phenylalanine, together with ftpM gene disruption suggested that FtpM catalyzes iterative methylation. Final evidence that a single enzyme repeatedly acts on fumaric acid amides came from an in vitro biochemical investigation with recombinantly produced FtpM. Size-exclusion chromatography indicated that this methyltransferase is active as a dimer. As ftpA and ftpM homologues are found clustered in other fungi, we expect our work will help to identify and annotate natural product biosynthesis genes in various species. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

mdtmFTP and its evaluation on ESNET SDN testbed

DOE PAGES

Zhang, Liang; Wu, Wenji; DeMar, Phil; ...

2017-04-21

In this paper, to address the high-performance challenges of data transfer in the big data era, we are developing and implementing mdtmFTP: a high-performance data transfer tool for big data. mdtmFTP has four salient features. First, it adopts an I/O centric architecture to execute data transfer tasks. Second, it more efficiently utilizes the underlying multicore platform through optimized thread scheduling. Third, it implements a large virtual file mechanism to address the lots-of-small-files (LOSF) problem. In conclusion, mdtmFTP integrates multiple optimization mechanisms, including–zero copy, asynchronous I/O, pipelining, batch processing, and pre-allocated buffer pools–to enhance performance. mdtmFTP has been extensively tested andmore » evaluated within the ESNET 100G testbed. Evaluations show that mdtmFTP can achieve higher performance than existing data transfer tools, such as GridFTP, FDT, and BBCP.« less

An Experimental Evaluation of Competing Age-Predictions of Future Time Perspective between Workplace and Retirement Domains.

PubMed

Kerry, Matthew J; Embretson, Susan E

2017-01-01

Future time perspective (FTP) is defined as "perceptions of the future as being limited or open-ended" (Lang and Carstensen, 2002; p. 125). The construct figures prominently in both workplace and retirement domains, but the age-predictions are competing: Workplace research predicts decreasing FTP age-change, in contrast, retirement scholars predict increasing FTP age-change. For the first time, these competing predictions are pitted in an experimental manipulation of subjective life expectancy (SLE). A sample of N = 207 older adults (age 45-60) working full-time (>30-h/week) were randomly assigned to SLE questions framed as either 'Live-to' or 'Die-by' to evaluate competing predictions for FTP. Results indicate general support for decreasing age-change in FTP, indicated by independent-sample t -tests showing lower FTP in the 'Die-by' framing condition. Further general-linear model analyses were conducted to test for interaction effects of retirement planning with experimental framings on FTP and intended retirement; While retirement planning buffered FTP's decrease, simple-effects also revealed that retirement planning increased intentions for sooner retirement, but lack of planning increased intentions for later retirement. Discussion centers on practical implications of our findings and consequences validity evidence in future empirical research of FTP in both workplace and retirement domains.

Future Time Perspective in the Work Context: A Systematic Review of Quantitative Studies.

PubMed

Henry, Hélène; Zacher, Hannes; Desmette, Donatienne

2017-01-01

A core construct in the lifespan theory of socioemotional selectivity, future time perspective (FTP) refers to individuals' perceptions of their remaining time in life. Its adaptation to the work context, occupational future time perspective (OFTP), entails workers' perceptions of remaining time and opportunities in their careers. Over the past decade, several quantitative studies have investigated antecedents and consequences of general FTP and OFTP in the work context (i.e., FTP at work). We systematically review and critically discuss this literature on general FTP ( k = 17 studies) and OFTP ( k = 16 studies) and highlight implications for future research and practice. Results of our systematic review show that, in addition to its strong negative relationship with age, FTP at work is also associated with other individual (e.g., personality traits) and contextual variables (e.g., job characteristics). Moreover, FTP at work has been shown to mediate and moderate relationships of individual and contextual antecedents with occupational well-being, as well as motivational and behavioral outcomes. As a whole, findings suggest that FTP at work is an important variable in the field of work and aging, and that future research should improve the ways in which FTP at work is measured and results on FTP at work are reported.

Future Time Perspective in the Work Context: A Systematic Review of Quantitative Studies

PubMed Central

Henry, Hélène; Zacher, Hannes; Desmette, Donatienne

2017-01-01

A core construct in the lifespan theory of socioemotional selectivity, future time perspective (FTP) refers to individuals’ perceptions of their remaining time in life. Its adaptation to the work context, occupational future time perspective (OFTP), entails workers’ perceptions of remaining time and opportunities in their careers. Over the past decade, several quantitative studies have investigated antecedents and consequences of general FTP and OFTP in the work context (i.e., FTP at work). We systematically review and critically discuss this literature on general FTP (k = 17 studies) and OFTP (k = 16 studies) and highlight implications for future research and practice. Results of our systematic review show that, in addition to its strong negative relationship with age, FTP at work is also associated with other individual (e.g., personality traits) and contextual variables (e.g., job characteristics). Moreover, FTP at work has been shown to mediate and moderate relationships of individual and contextual antecedents with occupational well-being, as well as motivational and behavioral outcomes. As a whole, findings suggest that FTP at work is an important variable in the field of work and aging, and that future research should improve the ways in which FTP at work is measured and results on FTP at work are reported. PMID:28400741

Fitness to practice of medical graduates: one programme's approach.

PubMed

Braatvedt, Claire; Poole, Phillippa; Merry, Alan; Gorman, Des; Reid, Papaarangi; Bagg, Warwick

2014-11-07

Doctors must ensure they are fit to practise medicine. There is a relationship between unprofessional behaviour at medical school and in subsequent medical practice. This study describes one programme's Fitness to Practice (FtP) policy and outcomes since inception in 2005. FtP notifications were classified into: health or personal; professional attitudes, or external issues. Seriousness was classified as non-critical, critical or extraordinarily critical. Anonymous data were extracted and analysed from a confidential FtP database. There were 157 FtP notifications involving 132 (5.5%) students. 87.2% were for issues with professional attitudes and 80.3% were non-critical. 17 students received more than one FtP notification. Students in clinical years were over-represented (p<0.0001) as were males (57% vs. 43%: p=0.0286). 96% of students continued the programme after remedial action. Two students were excluded from the programme on FtP grounds. The national regulatory body was notified of nine individual students with the potential for on- going FtP concerns. Over 9 years, 5.5% of medical students received a FtP notification, with most of these isolated non-critical incidents of a professional nature. A small subset of students had repeated or serious concerns, underscoring the need for a FtP policy in any medical programme.

Personality traits, future time perspective and adaptive behavior in adolescence.

PubMed

Gomes Carvalho, Renato Gil; Novo, Rosa Ferreira

2015-04-24

Several studies provide evidence of the importance of future time perspective (FTP) for individual success. However, little research addresses the relationship between FTP and personality traits, particularly if FTP can mediate their influence on behavior. In this study we analyze the mediating of FTP in the influence of personality traits on the way adolescents live their life at school. Sample consisted in 351 students, aged from 14 to 18 years-old, at different schooling levels. Instruments were the Portuguese version of the MMPI-A, particularly the PSY-5 dimensions (Aggressiveness, Psychoticism, Disconstraint, Neuroticism, Introversion), a FTP questionnaire, and a survey on school life, involving several indicators of achievement, social integration, and overall satisfaction. With the exception of Neuroticism, the results show significant mediation effects (p < .001) of FTP on most relationships between PSY-5 dimensions and school life variables. Concerning Disconstraint, FTP mediated its influence on overall satisfaction (β = -.125) and school achievement (β = -.106). In the case of Introversion, significant mediation effects occurred for interpersonal difficulties (β = .099) and participation in extracurricular activities (β = -.085). FTP was also a mediator of Psychoticism influence in overall satisfaction (β = -.094), interpersonal difficulties (β = .057), and behavior problems (β = .037). Finally, FTP mediated the influence of Aggressiveness on overall satisfaction (β = -.061), interpersonal difficulties (β = .040), achievement (β = -.052), and behavior problems (β = .023). Results are discussed considering the importance of FTP in the impact of some personality structural characteristics in students' school adaptation.

Is the Functional Threshold Power (FTP) a Valid Surrogate of the Lactate Threshold?

PubMed

Valenzuela, Pedro L; Morales, Javier S; Foster, Carl; Lucia, Alejandro; de la Villa, Pedro

2018-05-10

This study aimed to analyze the relationship between the Functional Threshold Power (FTP) and the Lactate Threshold (LT). 20 male cyclists performed an incremental test in which the LT was determined. At least 48 h later, they performed a 20-minute time trial and 95% of the mean power output (P20) was defined as FTP. Participants were divided into recreational (Peak Power Output [PPO] < 4.5 W∙kg -1 , n=11) or trained cyclists (PPO > 4.5 W∙kg -1 , n=9) according to their fitness status. The FTP (240 ± 35 W) was overall not significantly different (effect size[ES]=0.20, limits of agreement [LoA]=-2.4 ± 11.5%) from the LT (246 ± 24 W), and both markers were strongly correlated (r=0.95, p<0.0001). Accounting for the participants' fitness status, no significant differences were found between FTP and LT ([ES]=0.22; LoA=2.1 ± 7.8%) in TC, but FTP was significantly lower than the LT (p=0.0004, ES=0.81; LoA=-6.5 ± 8.3%) in RC. A significant relationship was found between relative PPO and the bias between FTP and the LT markers (r=0.77, p<0.0001). The FTP is a valid field test-based marker for the assessment of endurance fitness. However, caution should be taken when using the FTP interchangeably with the LT as the bias between markers seems to depend on the athletes' fitness status. Whereas the FTP provides a good estimate of the LT in trained cyclists, in recreational cyclists FTP may underestimate LT.

The Family Transition Program: Implementation and Three-Year Impacts of Florida's Initial Time-Limited Welfare Program.

ERIC Educational Resources Information Center

Bloom, Dan; Farrell, Mary; Kemple, James J.; Verma, Nandita

This report focuses on implementation, impacts, and time limit in Florida's Family Transition Program (FTP), a welfare reform initiative. Chapter 1 describes FTP and evaluation, target population, and data. Chapter 2 describes implementation of FTP in Escambia County: staffing and organizational structure of FTP and traditional Aid to Families…

Differential effects of power training versus functional task practice on compensation and restoration of arm function after stroke.

PubMed

Corti, Manuela; McGuirk, Theresa E; Wu, Samuel S; Patten, Carolynn

2012-09-01

Improved upper-extremity (UE) movement with stroke rehabilitation may involve restoration of more normal or development of compensatory movement patterns. The authors investigated the differential effects of functional task practice (FTP) and dynamic resistance training (POWER) on clinical function and reaching kinematics in an effort to distinguish between mechanisms of gains. A total of 14 hemiparetic individuals were randomly assigned to 10 weeks of either FTP or POWER and then crossed over to 10 weeks of the alternate treatment. Treatment order A was FTP followed by POWER, whereas treatment order B was POWER followed by FTP. Evaluation before and after each treatment block included a battery of clinical evaluations and kinematics of paretic UE functional reach to grasp. Both FTP and POWER improved movement accuracy, as revealed by a shift toward normal, including fewer submovements and reduced reach-path ratio. However, active range of motion revealed differential treatment effects. Shoulder flexion and elbow extension decreased with FTP and were associated with increased trunk displacement. In contrast, shoulder flexion and elbow extension excursion increased with POWER and were associated with significantly reduced trunk displacement. Treatment order B (POWER followed by FTP) revealed greater overall improvements. FTP increases compensatory movement patterns to improve UE function. POWER leads to more normal movement patterns. POWER prior to FTP may enhance the benefits of repetitive task practice.

RXIO: Design and implementation of high performance RDMA-capable GridFTP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tian, Yuan; Yu, Weikuan; Vetter, Jeffrey S.

2011-12-21

For its low-latency, high bandwidth, and low CPU utilization, Remote Direct Memory Access (RDMA) has established itself as an effective data movement technology in many networking environments. However, the transport protocols of grid run-time systems, such as GridFTP in Globus, are not yet capable of utilizing RDMA. In this study, we examine the architecture of GridFTP for the feasibility of enabling RDMA. An RDMA-capable XIO (RXIO) framework is designed and implemented to extend its XIO system and match the characteristics of RDMA. Our experimental results demonstrate that RDMA can significantly improve the performance of GridFTP, reducing the latency by 32%more » and increasing the bandwidth by more than three times. In achieving such performance improvements, RDMA dramatically cuts down CPU utilization of GridFTP clients and servers. In conclusion, these results demonstrate that RXIO can effectively exploit the benefits of RDMA for GridFTP. It offers a good prototype to further leverage GridFTP on wide-area RDMA networks.« less

A profilometry-based dentifrice abrasion Method for V8 brushing machines. Part I: Introduction to RDA-PE.

PubMed

White, Donald J; Schneiderman, Eva; Colón, Ellen; St John, Samuel

2015-01-01

This paper describes the development and standardization of a profilometry-based method for assessment of dentifrice abrasivity called Radioactive Dentin Abrasivity - Profilometry Equivalent (RDA-PE). Human dentine substrates are mounted in acrylic blocks of precise standardized dimensions, permitting mounting and brushing in V8 brushing machines. Dentin blocks are masked to create an area of "contact brushing." Brushing is carried out in V8 brushing machines and dentifrices are tested as slurries. An abrasive standard is prepared by diluting the ISO 11609 abrasivity reference calcium pyrophosphate abrasive into carboxymethyl cellulose/glycerin, just as in the RDA method. Following brushing, masked areas are removed and profilometric analysis is carried out on treated specimens. Assessments of average abrasion depth (contact or optical profilometry) are made. Inclusion of standard calcium pyrophosphate abrasive permits a direct RDA equivalent assessment of abrasion, which is characterized with profilometry as Depth test/Depth control x 100. Within the test, the maximum abrasivity standard of 250 can be created in situ simply by including a treatment group of standard abrasive with 2.5x number of brushing strokes. RDA-PE is enabled in large part by the availability of easy-to-use and well-standardized modern profilometers, but its use in V8 brushing machines is enabled by the unique specific conditions described herein. RDA-PE permits the evaluation of dentifrice abrasivity to dentin without the requirement of irradiated teeth and infrastructure for handling them. In direct comparisons, the RDA-PE method provides dentifrice abrasivity assessments comparable to the gold industry standard RDA technique.

40 CFR 600.113-08 - Fuel economy calculations for FTP, HFET, US06, SC03 and cold temperature FTP tests.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Fuel economy calculations for FTP, HFET, US06, SC03 and cold temperature FTP tests. 600.113-08 Section 600.113-08 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Fuel Economy...

Physiotherapy clinical educators' perceptions of student fitness to practise.

PubMed

Lo, Kristin; Curtis, Heather; Keating, Jennifer L; Bearman, Margaret

2017-01-17

Health professional students are expected to maintain Fitness to Practise (FTP) including clinical competence, professional behaviour and freedom from impairment (physical/mental health). FTP potentially affects students, clinicians and clients, yet the impact of supervising students across the spectrum of FTP issues remains relatively under-reported. This study describes clinical educators' perceptions of supporting students with FTP issues. Between November 2012 and January 2013 an online survey was emailed to physiotherapy clinical educators from 34 sites across eight health services in Australia. The self-developed survey contained both closed and open ended questions. Demographic data and Likert scale responses were summarised using descriptive statistics. The hypotheses that years of clinical experience increased clinical educator confidence and comfort in supporting specific student FTP issues were explored with correlational analysis. Open text questions were analysed based on thematic analysis. Sixty-one percent of the 79 respondents reported supervising one or more students with FTP issues. Observed FTP concerns were clinical competence (76%), mental health (51%), professional behaviour (47%) and physical health (36%). Clinicians considered 52% (95% CI 38-66) of these issues avoidable through early disclosure, student and clinician education, maximising student competency prior to commencing placements, and human resources. Clinicians were confident and comfortable supporting clinical competence, professional behaviour and physical health issues but not mental health issues. Experience significantly increased confidence to support all FTP issues but not comfort. Student FTP issues affects the clinical educator role with 83% (95% CI 75-92) of clinicians reporting that work satisfaction was affected due to time pressures, emotional impact, lack of appreciation of educator time, quality of care conflict and a mismatch in role perception. Educators also considered that FTP issues affect service delivery and impact on those seeking health care. Strategies to support student FTP have potential to positively impact on students, clinicians and clients. Collaboration between these stakeholders is required, particularly in supporting mental health. Universities are strategically placed to implement appropriate support such as communication support.

Cycling Power Outputs Predict Functional Threshold Power And Maximum Oxygen Uptake.

PubMed

Denham, Joshua; Scott-Hamilton, John; Hagstrom, Amanda D; Gray, Adrian J

2017-09-11

Functional threshold power (FTP) has emerged as a correlate of lactate threshold and is commonly assessed by recreational and professional cyclists for tailored exercise programing. To identify whether results from traditional aerobic and anaerobic cycling tests could predict FTP and V˙ O2max, we analysed the association between estimated FTP, maximum oxygen uptake (V˙ O2max [mlkgmin]) and power outputs obtained from a maximal cycle ergometry cardiopulmonary exercise test (CPET) and a 30-s Wingate test in a heterogeneous cohort of cycle-trained and untrained individuals (N=40, mean±SD; age: 32.6±10.6 y; relative V˙ O2max: 46.8±9.1 mlkgmin). The accuracy and sensitivity of the prediction equations was also assessed in young men (N=11) before and after a 6-wk sprint interval training intervention.Moderate to strong positive correlations were observed between FTP, relative V˙ O2max and power outputs achieved during incremental and 30-s Wingate cycling tests (r=.39-.965, all P<.05). While maximum power achieved during incremental cycle testing (Pmax) and relative V˙ O2max were predictors of FTP (r =.93), age and FTP (Wkg) estimated relative V˙ O2max (r=.80). Our findings confirm that FTP predominantly relies on aerobic metabolism and indicate both prediction models are sensitive enough to detect meaningful exercise-induced changes in FTP and V˙ O2max. Thus, coaches should consider limiting the time and load demands placed on athletes by conducting a maximal cycle ergometry CPET to estimate FTP. Additionally, a 20-min FTP test is a convenient method to assess V˙ O2max and is particularly relevant for exercise professionals without access to expensive CPET equipment.

Molecular insights into the enzymatic diversity of flavin-trafficking protein (Ftp; formerly ApbE) in flavoprotein biogenesis in the bacterial periplasm.

PubMed

Deka, Ranjit K; Brautigam, Chad A; Liu, Wei Z; Tomchick, Diana R; Norgard, Michael V

2016-02-01

We recently reported a flavin-trafficking protein (Ftp) in the syphilis spirochete Treponema pallidum (Ftp_Tp) as the first bacterial metal-dependent FAD pyrophosphatase that hydrolyzes FAD into AMP and FMN in the periplasm. Orthologs of Ftp_Tp in other bacteria (formerly ApbE) appear to lack this hydrolytic activity; rather, they flavinylate the redox subunit, NqrC, via their metal-dependent FMN transferase activity. However, nothing has been known about the nature or mechanism of metal-dependent Ftp catalysis in either Nqr- or Rnf-redox-containing bacteria. In the current study, we identified a bimetal center in the crystal structure of Escherichia coli Ftp (Ftp_Ec) and show via mutagenesis that a single amino acid substitution converts it from an FAD-binding protein to a Mg(2+)-dependent FAD pyrophosphatase (Ftp_Tp-like). Furthermore, in the presence of protein substrates, both types of Ftps are capable of flavinylating periplasmic redox-carrying proteins (e.g., RnfG_Ec) via the metal-dependent covalent attachment of FMN. A high-resolution structure of the Ftp-mediated flavinylated protein of Shewanella oneidensis NqrC identified an essential lysine in phosphoester-threonyl-FMN bond formation in the posttranslationally modified flavoproteins. Together, these discoveries broaden our understanding of the physiological capabilities of the bacterial periplasm, and they also clarify a possible mechanism by which flavoproteins are generated. © 2015 The Authors. MicrobiologyOpen published by John Wiley & Sons Ltd.

Moire measuring technology for three-dimensional profile of the object

NASA Astrophysics Data System (ADS)

Fu, Yanjun; Yang, Kuntao

2006-02-01

An optical system is designed to get projection of the transmission grating, the deformed grating is obtained on surface of the object. The image of the deformed grating is given by the lens, the reference grating is put on the place of the image, and then the moire fringe is obtained. The amplify principle of the moire fringe is used to measure the profile of the object. The optical principle of the projection is analyzed. And the relation between the phase and the height of object is deduced. From the different point of geometry optics and the physics opticsl, the optical system is analyzed, the factors that influence the image equality and the measuring result are obtained. So the betterment of improving the measuring precision is brought forward, and in the later information processing, because of the diffuse reflection, the image equality is not very well. In order to get a good image, the digital filter is used to filter the noise and smooth the image firstly. Then in order to improve the measure precision, the subdivision technology is applied. The Fourier transform profilometry and phase shifting technology is used in the calculation. A detail analyses is done both in time field and frequency field. And the method of improving the measuring precision is put forward. A good digital filter algorithm is brought forward in the Fourier transform profilometry. In the phase shifting technology, the detail formula of three-step and four-step is given. At last the phase that is relational with the high information of the object is get, but the phase is disconnected phase, after the unwrapping algorithm,the disconnected phase is changed to be the continuous phase. Taking use of the relation between the phase and height, the height is obtained. Then the three-dimensional profile of the measured object can be reconstructed. The system is very convenient for non-contact measure of profile of some objects.

Moderating effect of age on the association between future time perspective and preventive coping.

PubMed

Chen, Tao; Liu, Lu-Lu; Cui, Ji-Fang; Chen, Xing-Jie; Shi, Hai-Song; Neumann, David L; Shum, David H K; Wang, Ya; Chan, Raymond C K

2017-09-01

The present study aimed to investigate the moderating effect of age on the relationship between future time perspective (FTP) and future-oriented coping. A total of 1,915 participants aged 9-84 years completed measures of FTP and future-oriented coping. Moderation analyses were conducted to examine whether age played a role in the association between FTP and future-oriented coping (proactive and preventive). Results showed that proactive and preventive coping were negatively correlated with age, and age moderated the association between FTP and preventive coping but not proactive coping. Furthermore, the strength of the positive association between FTP and preventive coping was strongest among the older participants, moderate among the middle-aged participants, and weakest among the younger participants. These results suggest that the association between FTP and preventive coping varies across the lifespan. © 2017 The Institute of Psychology, Chinese Academy of Sciences and John Wiley & Sons Australia, Ltd.

Comparative analysis of the pressure profilometry of vesicocutaneous continent catheterizable conduits between patients with and without rectus abdominis neosphincter (Yachia principle).

PubMed

Rondon, Atila; Leslie, Bruno; Arcuri, Leonardo Javier; Ortiz, Valdemar; Macedo, Antonio

2015-09-01

To assess whether crossing rectus abdominis muscle strips, as proposed by Yachia, would change urinary catheterizable conduit's pressure profilometry, in static and dynamic conditions. Non-randomized selection of 20 continent patients that underwent Macedo's ileum-based reservoir, 10 including Yachia's technique (Study Group) and 10 without this mechanism of continence (Control Group). Demographics and cystometric data were assessed. Conduit's pressure profilometry was obtained by infusing saline through a multichannel catheter, at rest and during Valsalva maneuver. We assessed the pressure: (a) in the bladder; (b) in conduit's proximal segment; and (c) in conduit's distal segment, which is presumably the abdominal wall and crossed muscle strips site. Mean age at surgery was 6.1 years in the Control Group and 7.7 years in the Study Group. There was no statistically significant difference between groups regarding maximum cystometric bladder capacity and leakage point pressure. At rest, the pressure profilometry showed similar results between groups in all segments analyzed. During Valsalva maneuver, pressure profilometry showed similar results between groups in bladder and conduit's proximal segment pressure. In this condition, conduit's distal segment pressure in the Study Group (Mean = 72.9 and Peak = 128.7 cmH2 O) was significantly greater (P < 0.05) than conduit's distal segment pressure in the Control Group (Mean = 48.3 and Peak = 65.1 cmH2 O). Crossing muscle strips over the conduit significantly increases the pressure in its distal segment during contraction of the rectus abdominis muscle, which can be important in moments of sudden increase in abdominal pressure in order to keep continence. © 2014 Wiley Periodicals, Inc.

Overlapping Networks Engaged during Spoken Language Production and Its Cognitive Control

PubMed Central

Wise, Richard J.S.; Mehta, Amrish; Leech, Robert

2014-01-01

Spoken language production is a complex brain function that relies on large-scale networks. These include domain-specific networks that mediate language-specific processes, as well as domain-general networks mediating top-down and bottom-up attentional control. Language control is thought to involve a left-lateralized fronto-temporal-parietal (FTP) system. However, these regions do not always activate for language tasks and similar regions have been implicated in nonlinguistic cognitive processes. These inconsistent findings suggest that either the left FTP is involved in multidomain cognitive control or that there are multiple spatially overlapping FTP systems. We present evidence from an fMRI study using multivariate analysis to identify spatiotemporal networks involved in spoken language production in humans. We compared spoken language production (Speech) with multiple baselines, counting (Count), nonverbal decision (Decision), and “rest,” to pull apart the multiple partially overlapping networks that are involved in speech production. A left-lateralized FTP network was activated during Speech and deactivated during Count and nonverbal Decision trials, implicating it in cognitive control specific to sentential spoken language production. A mirror right-lateralized FTP network was activated in the Count and Decision trials, but not Speech. Importantly, a second overlapping left FTP network showed relative deactivation in Speech. These three networks, with distinct time courses, overlapped in the left parietal lobe. Contrary to the standard model of the left FTP as being dominant for speech, we revealed a more complex pattern within the left FTP, including at least two left FTP networks with competing functional roles, only one of which was activated in speech production. PMID:24966373

Automated Synthesis of 18F-Fluoropropoxytryptophan for Amino Acid Transporter System Imaging

PubMed Central

Shih, I-Hong; Duan, Xu-Dong; Kong, Fan-Lin; Williams, Michael D.; Zhang, Yin-Han; Yang, David J.

2014-01-01

Objective. This study was to develop a cGMP grade of [18F]fluoropropoxytryptophan (18F-FTP) to assess tryptophan transporters using an automated synthesizer. Methods. Tosylpropoxytryptophan (Ts-TP) was reacted with K18F/kryptofix complex. After column purification, solvent evaporation, and hydrolysis, the identity and purity of the product were validated by radio-TLC (1M-ammonium acetate : methanol = 4 : 1) and HPLC (C-18 column, methanol : water = 7 : 3) analyses. In vitro cellular uptake of 18F-FTP and 18F-FDG was performed in human prostate cancer cells. PET imaging studies were performed with 18F-FTP and 18F-FDG in prostate and small cell lung tumor-bearing mice (3.7 MBq/mouse, iv). Results. Radio-TLC and HPLC analyses of 18F-FTP showed that the Rf and Rt values were 0.9 and 9 min, respectively. Radiochemical purity was >99%. The radiochemical yield was 37.7% (EOS 90 min, decay corrected). Cellular uptake of 18F-FTP and 18F-FDG showed enhanced uptake as a function of incubation time. PET imaging studies showed that 18F-FTP had less tumor uptake than 18F-FDG in prostate cancer model. However, 18F-FTP had more uptake than 18F-FDG in small cell lung cancer model. Conclusion. 18F-FTP could be synthesized with high radiochemical yield. Assessment of upregulated transporters activity by 18F-FTP may provide potential applications in differential diagnosis and prediction of early treatment response. PMID:25136592

Overlapping networks engaged during spoken language production and its cognitive control.

PubMed

Geranmayeh, Fatemeh; Wise, Richard J S; Mehta, Amrish; Leech, Robert

2014-06-25

Spoken language production is a complex brain function that relies on large-scale networks. These include domain-specific networks that mediate language-specific processes, as well as domain-general networks mediating top-down and bottom-up attentional control. Language control is thought to involve a left-lateralized fronto-temporal-parietal (FTP) system. However, these regions do not always activate for language tasks and similar regions have been implicated in nonlinguistic cognitive processes. These inconsistent findings suggest that either the left FTP is involved in multidomain cognitive control or that there are multiple spatially overlapping FTP systems. We present evidence from an fMRI study using multivariate analysis to identify spatiotemporal networks involved in spoken language production in humans. We compared spoken language production (Speech) with multiple baselines, counting (Count), nonverbal decision (Decision), and "rest," to pull apart the multiple partially overlapping networks that are involved in speech production. A left-lateralized FTP network was activated during Speech and deactivated during Count and nonverbal Decision trials, implicating it in cognitive control specific to sentential spoken language production. A mirror right-lateralized FTP network was activated in the Count and Decision trials, but not Speech. Importantly, a second overlapping left FTP network showed relative deactivation in Speech. These three networks, with distinct time courses, overlapped in the left parietal lobe. Contrary to the standard model of the left FTP as being dominant for speech, we revealed a more complex pattern within the left FTP, including at least two left FTP networks with competing functional roles, only one of which was activated in speech production. Copyright © 2014 Geranmayeh et al.

Frutapin, a lectin from Artocarpus incisa (breadfruit): cloning, expression and molecular insights

PubMed Central

da Silva, Bruno Bezerra; Furtado, Gilvan Pessoa; Carneiro, Igor de Sa; Lobo, Marina Duarte Pinto; Guan, Yiwei; Guo, Jingxu; Coker, Alun R.; Lourenzoni, Marcos Roberto; Guedes, Maria Izabel Florindo; Owen, James S.; Abraham, David J.; Monteiro-Moreira, Ana Cristina de Oliveira; Moreira, Renato de Azevedo

2017-01-01

Artocarpus incisa (breadfruit) seeds contain three different lectins (Frutalin, Frutapin (FTP) and Frutackin) with distinct carbohydrate specificities. The most abundant lectin is Frutalin, an α-D-galactose-specific carbohydrate-binding glycoprotein with antitumour properties and potential for tumour biomarker discovery as already reported. FTP is the second most abundant, but proved difficult to purify with very low yields and contamination with Frutalin frustrating its characterization. Here, we report for the first time high-level production and isolation of biologically active recombinant FTP in Escherichia coli BL21, optimizing conditions with the best set yielding >40 mg/l culture of soluble active FTP. The minimal concentration for agglutination of red blood cells was 62.5 µg/ml of FTP, a process effectively inhibited by mannose. Apo-FTP, FTP–mannose and FTP–glucose crystals were obtained, and they diffracted X-rays to a resolution of 1.58 (P212121), 1.70 (P3121) and 1.60 (P3121) Å respectively. The best solution showed four monomers per asymmetric unit. Molecular dynamics (MD) simulation suggested that FTP displays higher affinity for mannose than glucose. Cell studies revealed that FTP was non-cytotoxic to cultured mouse fibroblast 3T3 cells below 0.5 mg/ml and was also capable of stimulating cell migration at 50 µg/ml. In conclusion, our optimized expression system allowed high amounts of correctly folded soluble FTP to be isolated. This recombinant bioactive lectin will now be tested in future studies for therapeutic potential; for example in wound healing and tissue regeneration. PMID:28684550

Automated synthesis of 18F-fluoropropoxytryptophan for amino acid transporter system imaging.

PubMed

Shih, I-Hong; Duan, Xu-Dong; Kong, Fan-Lin; Williams, Michael D; Yang, Kevin; Zhang, Yin-Han; Yang, David J

2014-01-01

This study was to develop a cGMP grade of [(18)F]fluoropropoxytryptophan ((18)F-FTP) to assess tryptophan transporters using an automated synthesizer. Tosylpropoxytryptophan (Ts-TP) was reacted with K(18)F/kryptofix complex. After column purification, solvent evaporation, and hydrolysis, the identity and purity of the product were validated by radio-TLC (1M-ammonium acetate : methanol = 4 : 1) and HPLC (C-18 column, methanol : water = 7 : 3) analyses. In vitro cellular uptake of (18)F-FTP and (18)F-FDG was performed in human prostate cancer cells. PET imaging studies were performed with (18)F-FTP and (18)F-FDG in prostate and small cell lung tumor-bearing mice (3.7 MBq/mouse, iv). Radio-TLC and HPLC analyses of (18)F-FTP showed that the Rf and Rt values were 0.9 and 9 min, respectively. Radiochemical purity was >99%. The radiochemical yield was 37.7% (EOS 90 min, decay corrected). Cellular uptake of (18)F-FTP and (18)F-FDG showed enhanced uptake as a function of incubation time. PET imaging studies showed that (18)F-FTP had less tumor uptake than (18)F-FDG in prostate cancer model. However, (18)F-FTP had more uptake than (18)F-FDG in small cell lung cancer model. (18)F-FTP could be synthesized with high radiochemical yield. Assessment of upregulated transporters activity by (18)F-FTP may provide potential applications in differential diagnosis and prediction of early treatment response.

Integrated fringe projection 3D scanning system for large-scale metrology based on laser tracker

NASA Astrophysics Data System (ADS)

Du, Hui; Chen, Xiaobo; Zhou, Dan; Guo, Gen; Xi, Juntong

2017-10-01

Large scale components exist widely in advance manufacturing industry,3D profilometry plays a pivotal role for the quality control. This paper proposes a flexible, robust large-scale 3D scanning system by integrating a robot with a binocular structured light scanner and a laser tracker. The measurement principle and system construction of the integrated system are introduced. And a mathematical model is established for the global data fusion. Subsequently, a flexible and robust method and mechanism is introduced for the establishment of the end coordination system. Based on this method, a virtual robot noumenon is constructed for hand-eye calibration. And then the transformation matrix between end coordination system and world coordination system is solved. Validation experiment is implemented for verifying the proposed algorithms. Firstly, hand-eye transformation matrix is solved. Then a car body rear is measured for 16 times for the global data fusion algorithm verification. And the 3D shape of the rear is reconstructed successfully.

A three-component model of future time perspective across adulthood.

PubMed

Rohr, Margund K; John, Dennis T; Fung, Helene H; Lang, Frieder R

2017-11-01

Although extensive findings underscore the relevance of future time perspective (FTP) in the process of aging, the assumption of FTP as a unifactorial construct has been challenged. The present study explores the factorial structure of the FTP scale (Carstensen & Lang, 1996) as one of the most widely used measures (Ntotal = 2,170). Results support that FTP reflects a higher-order construct that consists of 3 interrelated components-Opportunity, Extension, and Constraint. It is suggested that the flexible usage of the FTP scale as an all compassing 10-item measure or with focus on specific components depends on the concrete research question. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Network Security and the NPS Internet Firewall.

DTIC Science & Technology

1994-09-16

NIS between clients and servers. The ypxfr service is used for trans- Network Information ferring the /etc/ passwd file from the master server to the...slave Service servers. If the NIS domain name is guessed, an outsider can get a copy of the /etc/ passwd file. Table 5: Network Services With Known...TCP ports 20 and 21), for the ftp network service: outside% ftp 131.120.50.151 ftp> get /etc/ passwd /tmp/passwd.inside (login process...) ftp> cd nttcp

Physiotherapy clinical educators' perspectives on a fitness to practice initiative.

PubMed

Lo, Kristin; Curtis, Heather; Francis-Cracknell, Alison; Maloney, Stephen; Nickson, Wendy; Bearman, Margaret; Keating, Jennifer L

2018-01-01

Health practitioner registration boards require health professionals to evaluate and maintain "fitness to practice" (FTP). This encompasses the professional behavior, clinical competence, and freedom from impairment required for safe and effective service provision. We developed and implemented policies to promote student self-assessment and support of FTP that were pre-emptive and designed to be helpful and sought clinician feedback on this initiative. An innovative student-centered FTP approach was devised with consideration of defensible ethico-legal practice. A survey explored clinical educators' perceptions of the FTP policy and the associated education and support. Closed and open survey questions were analyzed using descriptive statistics, qualitative evaluation, and thematic analysis. Seventy-nine physiotherapy clinical educators from 34 sites across eight Australian health services returned surveys. Educators had positive perceptions of policy components, particularly incorporating professionalism as a hurdle requirement and the attendance and incident reporting policies. The benefits of a student-centered FTP approach included clarity and consistency in managing FTP issues and facilitation of student awareness through active engagement in maintaining their FTP. To our knowledge, this paper is the first to report a comprehensive approach to the range of FTP issues incorporating student self-declaration of issues that may affect desirable progression through clinical placements. The policy and program of education and support are likely to be generalizable to health professional training programs that utilize workplace training.

An Experimental Evaluation of Competing Age-Predictions of Future Time Perspective between Workplace and Retirement Domains

PubMed Central

Kerry, Matthew J.; Embretson, Susan E.

2018-01-01

Future time perspective (FTP) is defined as “perceptions of the future as being limited or open-ended” (Lang and Carstensen, 2002; p. 125). The construct figures prominently in both workplace and retirement domains, but the age-predictions are competing: Workplace research predicts decreasing FTP age-change, in contrast, retirement scholars predict increasing FTP age-change. For the first time, these competing predictions are pitted in an experimental manipulation of subjective life expectancy (SLE). A sample of N = 207 older adults (age 45–60) working full-time (>30-h/week) were randomly assigned to SLE questions framed as either ‘Live-to’ or ‘Die-by’ to evaluate competing predictions for FTP. Results indicate general support for decreasing age-change in FTP, indicated by independent-sample t-tests showing lower FTP in the ‘Die-by’ framing condition. Further general-linear model analyses were conducted to test for interaction effects of retirement planning with experimental framings on FTP and intended retirement; While retirement planning buffered FTP’s decrease, simple-effects also revealed that retirement planning increased intentions for sooner retirement, but lack of planning increased intentions for later retirement. Discussion centers on practical implications of our findings and consequences validity evidence in future empirical research of FTP in both workplace and retirement domains. PMID:29375435

Method for 3D profilometry measurement based on contouring moire fringe

NASA Astrophysics Data System (ADS)

Shi, Zhiwei; Lin, Juhua

2007-12-01

3D shape measurement is one of the most active branches of optical research recently. A method of 3D profilometry measurement by the combination of Moire projection method and phase-shifting technology based on SCM (Single Chip Microcomputer) control is presented in the paper. Automatic measurement of 3D surface profiles can be carried out by applying this method with high speed and high precision.

Data Pool Description

Atmospheric Science Data Center

2016-04-29

ASDC Data Pool   Notices   • DataPool will transition from ...  • Use IE7 for FTP sessions: a) Select "View", "Open FTP site in Windows Explorer" or b) Open Windows Explorer and enter the URL for the FTP site in the address bar ...

Now is the time to demand change to punishing FtP procedures.

PubMed

Mason, Sharon

2016-05-25

Having undergone Nursing and Midwifery Council fitness to practise (FtP) proceedings after raising and escalating concerns, I read with interest your article about nurses facing FtP hearings being 'pushed to breaking point' (analysis, May 11).

A laser profilometry technique for monitoring fluvial dike breaching in laboratory experiments

NASA Astrophysics Data System (ADS)

Dewals, Benjamin; Rifai, Ismail; Erpicum, Sébastien; Archambeau, Pierre; Violeau, Damien; Pirotton, Michel; El kadi Abderrezzak, Kamal

2017-04-01

A challenging aspect for experimental modelling of fluvial dike breaching is the continuous monitoring of the transient breach geometry. In dam breaching cases induced by flow overtopping over the whole breach crest (plane erosion), a side view through a glass wall is sufficient to monitor the breach formation. This approach can be extended for 3D dam breach tests (spatial erosion) if the glass wall is located along the breach centreline. In contrast, using a side view does not apply for monitoring fluvial dike breaching, because the breach is not symmetric in this case. We present a non-intrusive, high resolution technique to record the breach development in experimental models of fluvial dikes by means of a laser profilometry (Rifai et al. 2016). Most methods used for monitoring dam and dike breaching involve the projection of a pattern (fringes, grid) on the dam or dike body and the analysis of its deformation on images recorded during the breaching (e.g., Pickert et al. 2011, Frank and Hager 2014). A major limitation of these methods stems from reflection on the water surface, particularly in the vicinity of the breach where the free surface is irregular and rippled. This issue was addressed by Spinewine et al. (2004), who used a single laser sheet so that reflections on the water surface were strongly limited and did not hamper the accurate processing of each image. We have developed a similar laser profilometry technique tailored for laboratory experiments on fluvial dike breaching. The setup is simple and relatively low cost. It consists of a digital video camera (resolution of 1920 × 1080 pixels at 60 frames per second) and a swiping red diode 30 mW laser that enables the projection of a laser sheet over the dike body. The 2D image coordinates of each deformed laser profile incident on the dike are transformed into 3D object coordinates using the Direct Linear Transformation (DLT) algorithm. All 3D object coordinates computed over a swiping cycle of the laser are merged to generate a cloud of points. The DLT-based image processing method uses control points and reference axes, so that no prior knowledge is needed on the position, orientation and intrinsic characteristics of the camera, nor on the laser position. Refraction of the light and laser rays across the water surface needs to be taken into account, because the dike is partially submerged during the experiments. An ad hoc correction is therefore applied using the Snell-Descartes law. For this purpose, planar approximations are used to describe the shape of the water surface. In the presentation, we will discuss the resulting uncertainty and will detail the validation of the developed method based on configurations of known geometry with various complexity. The presented laser profilometry technique allows for a rapid non-intrusive measurement of the dike geometry evolution. It is readily available for laboratory experiments and has proven its performance (Rifai et al. 2017). Further adjustments are needed for its application to cohesive dike material due to the reduced visibility resulting from the higher turbidity of water. References Frank, P.-J., Hager, W.H. (2014). Spatial dike breach: Accuracy of photogrammetric measurement system. Proc. of the International Conference on Fluvial Hydraulics, River Flow 2014, 1647-1654. Pickert, G., Weitbrecht, V., Bieberstein A. (2011). Beaching of overtopped river embankments controlled by apparent cohesion. Journal of Hydraulic Research 49:143-156. Rifai, I., Erpicum, S., Archambeau, P., Violeau, D., Pirotton, M., El kadi Abderrezzak, K., Dewals, B. (2016). Monitoring topography of laboratory fluvial dike models subjected to breaching based on a laser profilometry technique. Proc. of the International Symposium on River Sedimentation (ISRS): Stuttgart, 19-22 September 2016. Rifai, I., Erpicum, S., Archambeau, P., Violeau, D., Pirotton, M., El kadi Abderrezzak, K., Dewals, B. (2017). Overtopping induced failure of non-cohesive, homogenous fluvial dikes. Water Resources Research, under revision. Spinewine, B., Delobbe, A., Elslander, L., Zech, Y. (2004). Experimental investigation of the breach growth process in sand dikes. Proc. of the International Conference on Fluvial Hydraulics, River Flow 2004, 2:983-991.

A Robust Wrap Reduction Algorithm for Fringe Projection Profilometry and Applications in Magnetic Resonance Imaging.

PubMed

Arevalillo-Herraez, Miguel; Cobos, Maximo; Garcia-Pineda, Miguel

2017-03-01

In this paper, we present an effective algorithm to reduce the number of wraps in a 2D phase signal provided as input. The technique is based on an accurate estimate of the fundamental frequency of a 2D complex signal with the phase given by the input, and the removal of a dependent additive term from the phase map. Unlike existing methods based on the discrete Fourier transform (DFT), the frequency is computed by using noise-robust estimates that are not restricted to integer values. Then, to deal with the problem of a non-integer shift in the frequency domain, an equivalent operation is carried out on the original phase signal. This consists of the subtraction of a tilted plane whose slope is computed from the frequency, followed by a re-wrapping operation. The technique has been exhaustively tested on fringe projection profilometry (FPP) and magnetic resonance imaging (MRI) signals. In addition, the performance of several frequency estimation methods has been compared. The proposed methodology is particularly effective on FPP signals, showing a higher performance than the state-of-the-art wrap reduction approaches. In this context, it contributes to canceling the carrier effect at the same time as it eliminates any potential slope that affects the entire signal. Its effectiveness on other carrier-free phase signals, e.g., MRI, is limited to the case that inherent slopes are present in the phase data.

The limits of a limited future time perspective in explaining age differences in emotional functioning.

PubMed

Grühn, Daniel; Sharifian, Neika; Chu, Qiao

2016-09-01

Although a limited future time perspective (FTP) has been theorized to be the underlying mechanism of positive emotional functioning later in life, there is scant empirical evidence for this position. Using an integrative data-analytic approach, we investigated the predictive value of FTP, age, and subjective health in explaining emotional functioning in a sample of 2,504 adults (17 to 87 years, M = 35.5, SD = 14.2). Although older adults reported a more limited FTP than younger adults, age and a limited FTP had opposite effects in predicting subjective well-being, affect, positive emotions, empathy, and attitudes toward emotions. That is, old age was linked to a more adaptive emotional profile, whereas a limited FTP was linked to a more maladaptive emotional profile. This was the case even after controlling for health-related aspects. The findings question the usage of FTP as an explanatory variable for observed age differences in emotional functioning. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Surface profilometry using the incoherent self-imaging technique in reflection mode

NASA Astrophysics Data System (ADS)

Hassani, Khosrow; Nahal, Arashmid; Tirandazi, Negin

2018-01-01

In this paper, we introduce a highly sensitive and cost-effective surface profilometry technique based on the Lau self-imaging phenomenon in reflection mode, combined with the Moiré technique. Standard incoherent grating imaging with two Ronchi rulings is deployed to produce localized Fresnel pseudoimages, except that the light wavefront gets modulated after reflecting off the surface under test and before the final image forms. A third grating is superimposed on the pseudoimage to take advantage of the magnification property of the Moiré fringes and enhance the surface-induced modulations. A five-step phase-shifting technique is used to extract the 2D surface profile of the sample from the recorded Moiré patterns. To demonstrate our technique, we measure the profile of a 250 nm step-like metallic sample. The results show a few nanometer uncertainties, very good reproducibility, and agreement with other known optical and mechanical surface profilometry methods.

Future Time Perspective as a Predictor of Adolescents' Adaptive Behavior in School

ERIC Educational Resources Information Center

Carvalho, Renato Gil Gomes

2015-01-01

Future time perspective (FTP) has been associated with positive outcomes in adolescents' development across different contexts. However, the extent to which FTP influences adaptation needs additional understanding. In this study, we analysed the relationship between FTP and adolescents' behavior in school, as expressed in several indicators of…

[Final thermal preference in parthenogenetic females of Daphnia magna Straus (Crustacea: Cladocera) acclimated to various temperatures].

PubMed

Verbitskiĭ, V B; Verbitskaia, T I

2011-01-01

The final thermal preference (FTP) range in parthenogenetic females of cladoceran Daphnia magna was assessed by "acute" and "chronic" methods. The first method included 4-month acclimation to different temperatures in the range of 14.2 +/- 0.7 to 27.1 +/- 0.3 degrees C; the "chronic" method was characterized by long-term acclimation to +20 degrees C. Two ranges of FTP were found for D. magna, 13.3-15.4 degrees C and 20.2-26.2 degrees C. The thermal preference ofdaphnids and the temperature of acclimation were correspondingly linearly. The range of FTP was independent of the season. The food-searching activity of D. magna rose in April, when the FTP range increased, and the FTP was less pronounced.

Fallopian tube prolapse following hysterectomy.

PubMed

Fan, Qing-bo; Liu, Zhu-feng; Lang, Jing-he; Sun, Da-wei; Leng, Jin-hua; Zhu, Lan; Ning, Liu

2006-03-01

To investigate the clinical diagnosis, treatment, and prevention of fallopian tube prolapse (FTP) after hysterectomy. A total of 7949 patients received hysterectomy from January 1983 to August 2005 in Peking Union Medical College Hospital, and 9 cases (including 1 case from other hospital) of FTP after hysterectomy were involved during this period. All of them were diagnosed according to pathological results and were followed up. The symptoms, diagnosis, and treatment of the FTP patients were analyzed retrospectively. The incidence of FTP after hysterectomy was 0.1% (8/7949), with the incidence of FTP after transabdominal hysterectomy being 0.06% (4/6229), after trans-vaginal hysterectomy being 0.5% (4/780), after laparoscopic assistant vaginal hysterectomy being 0 (0/940). There was no symptom in 3 cases. The pelvic examination revealed the typical prolapsed fimbrial end of a fallopian tube in 3 cases and the other 6 cases revealed red granulation tissue. All of them were excised vaginally and cauterized. The results were proved by pathological examination. No recurrence was reported during follow-up. FTP is a rare complication after hysterectomy. The prognosis is well after proper diagnosis and treatment Fixation of accessories onto the pelvic wall and complete peritonealization at the time of hysterectomy are the most important methods to prevent FTP after hysterectomy.

The effect of future time perspective on procrastination: the role of parahippocampal gyrus and ventromedial prefrontal cortex.

PubMed

Liu, Peiwei; Feng, Tingyong

2018-05-09

Procrastination is an almost universal affliction, which occurs across culture and brings serious consequences across multiple fields, such as finance, health and education. Previous research has showed procrastination can be influenced by future time perspective (FTP). However, little is known about the neural basis underlying the impact of FTP on procrastination. To address this question, we used voxel-based morphometry (VBM) based on brain structure. In line with previous findings, the behavioral result indicated that FTP inventory scores were significantly negatively correlated with procrastination inventory scores (r = -0.63, n = 160). The whole-brain VBM results showed that FTP scores were significantly negatively correlated with the grey matter (GM) volumes of the parahippocampal gyrus (paraPHC) and ventromedial prefrontal cortex (vmPFC) after the multiple comparisons correction. Furthermore, mediation analyses revealed that the effect of GM volumes of the paraPHC and vmPFC on procrastination was mediated by FTP. These results suggested that paraPHC and vmPFC, the critical brain regions about episodic future thinking, could be the neural basis responsible for the impact of FTP on procrastination. The present study extends our knowledge on procrastination, and provides a novel perspective to understand the relationship between FTP and procrastination.

Comment on "Fringe projection profilometry with nonparallel illumination: a least-squares approach"

NASA Astrophysics Data System (ADS)

Wang, Zhaoyang; Bi, Hongbo

2006-07-01

We comment on the recent Letter by Chen and Quan [Opt. Lett.30, 2101 (2005)] in which a least-squares approach was proposed to cope with the nonparallel illumination in fringe projection profilometry. It is noted that the previous mathematical derivations of the fringe pitch and carrier phase functions on the reference plane were incorrect. In addition, we suggest that the variation of carrier phase along the vertical direction should be considered.

Future Time Perspective in Sociocultural Contexts: A Discussion Paper

ERIC Educational Resources Information Center

Phan, Huy P.

2009-01-01

Future time perspective (FTP) serves as a strong motivational force for individuals to engage in activities that may be instrumental in future outcomes. There has been a voluminous body of research studies, to date, that explored the importance of FTP. This article discusses FTP from sociocultural perspectives. Based on previous empirical…

Effects and mechanism of freeze-thawing cycles on the soil N2O fluxes in the temperate semi-arid steppe.

PubMed

Wang, Liqin; Qi, Yuchun; Dong, Yunshe; Peng, Qin; Guo, Shufang; He, Yunlong; Li, Zhaolin

2017-06-01

High nitrous oxide (N 2 O) emissions during freeze-thawing period (FTP) have been observed in many different ecosystems. However, the knowledge about the dynamic of soil N 2 O emissions and its main driving mechanism during the freeze-thawing processes in grassland ecosystem is still limited. An in-situ experiment was conducted during the FTP on the sites with 0 and 15% surplus of the average rainfall and two levels of N addition (0,10gN/(m 2 ·year)) during growing season (marked as W0N0, W15N0, W0N10, W15N10, respectively) to explore the effects of water and N background on soil N 2 O emissions during FTPs and the relationship between soil N 2 O emissions and environmental factors. The results indicated that water and N treatments conducted during growing season did not show significant effect on the N 2 O effluxes of FTP, but the soil mineral N contents of W0N10 treatment were significantly higher than those of W0N0, W15N0, W15N10 treatments (p<0.05). The soil PLFA concentrations of microbial groups monitored during 2015 spring freeze-thawing period (2015S-FTP) were lower than those during winter freeze-thawing period of 2014 (2014W-FTP), while cumulative soil N 2 O emissions of 2015S-FTP were higher than those of 2014W-FTP. The correlations between soil N 2 O effluxes and most of the measured environmental factors were insignificant, multiple stepwise regression analysis indicated that the soil temperature, soil NH 4 + -N content and air temperature were the major environmental factors which significantly influenced the N 2 O effluxes during 2014W-FTP, and air temperature and soil water content were the significant influencing factors during 2015S-FTP. Copyright © 2016. Published by Elsevier B.V.

Friedman tongue position and cone beam computed tomography in patients with obstructive sleep apnea

PubMed Central

O'Brien, Louise; Aronovich, Sharon; Shelgikar, Anita; Hoff, Paul; Palmisano, John; Stanley, Jeffrey

2017-01-01

Objective Evaluate the correlation between Friedman Tongue Position (FTP) and airway cephalometrics in patients with obstructive sleep apnea (OSA). Study Design Retrospective review of adult patients with OSA undergoing Cone Beam Computed Tomography (CBCT). Methods Collected data included age, sex, body mass index, apnea hypopnea index, FTP, and airway cephalometric parameters. Data analyses were performed using ANOVA, dichotomous t‐testing, and linear regression. Results 203 patients were included in the analysis. (M:F 132:71). The mean posterior airway space (PAS) was inversely correlated (p = 0.001, r =.119) with higher FTP grades with means of 12.3 mm, 7.9 mm, 6.6 mm, and 4.3 mm, I‐IV respectively. Minimal cross‐sectional area for patients with FTP I‐IV was 245.7, 179.8, 137.6, and 74.2 mm, 2 respectively (p = 0.002, r = .095). Mean hyoid‐mandibular plane (H‐MP) for FTP I‐IV was 20.6 mm, 20.4 mm, 24.7 mm, and 28.9 mm respectively. No statistically significant difference between H‐MP values when comparing patients with FTP I or II (p = 0.22). There were statistically significant differences when these two groups were individually compared to FTP III and IV (p = 0.002). Linear regression analysis confirmed an independent association between FTP and PAS (β = −2.06, p < 0.001), minimal cross‐sectional area (β = −45.07, p = 0.02), and H‐MP (β = 3.03, p = 0.01) controlling for BMI, age, AHI, and sex. Conclusions Use of FTP is supported by objective CBCT cephalometric results, in particular the PAS, minimal cross‐sectional area, and H‐MP. Understanding the correlation between objective measurements of retroglossal collapse should allow Otolaryngologists to more confidently select patients who may require surgery to address the retroglossal area, particularly when the ability to perform cephalometric analysis is not possible Level of Evidence 4. PMID:29094076

Friedman tongue position and cone beam computed tomography in patients with obstructive sleep apnea.

PubMed

Harvey, Rebecca; O'Brien, Louise; Aronovich, Sharon; Shelgikar, Anita; Hoff, Paul; Palmisano, John; Stanley, Jeffrey

2017-10-01

Evaluate the correlation between Friedman Tongue Position (FTP) and airway cephalometrics in patients with obstructive sleep apnea (OSA). Retrospective review of adult patients with OSA undergoing Cone Beam Computed Tomography (CBCT). Collected data included age, sex, body mass index, apnea hypopnea index, FTP, and airway cephalometric parameters. Data analyses were performed using ANOVA, dichotomous t-testing, and linear regression. 203 patients were included in the analysis. (M:F 132:71). The mean posterior airway space (PAS) was inversely correlated ( p  = 0.001, r =.119) with higher FTP grades with means of 12.3 mm, 7.9 mm, 6.6 mm, and 4.3 mm, I-IV respectively. Minimal cross-sectional area for patients with FTP I-IV was 245.7, 179.8, 137.6, and 74.2 mm, 2 respectively ( p  = 0.002, r  = .095). Mean hyoid-mandibular plane (H-MP) for FTP I-IV was 20.6 mm, 20.4 mm, 24.7 mm, and 28.9 mm respectively. No statistically significant difference between H-MP values when comparing patients with FTP I or II ( p  = 0.22). There were statistically significant differences when these two groups were individually compared to FTP III and IV ( p  = 0.002). Linear regression analysis confirmed an independent association between FTP and PAS (β = -2.06, p  < 0.001), minimal cross-sectional area (β = -45.07, p  = 0.02), and H-MP (β = 3.03, p  = 0.01) controlling for BMI, age, AHI, and sex. Use of FTP is supported by objective CBCT cephalometric results, in particular the PAS, minimal cross-sectional area, and H-MP. Understanding the correlation between objective measurements of retroglossal collapse should allow Otolaryngologists to more confidently select patients who may require surgery to address the retroglossal area, particularly when the ability to perform cephalometric analysis is not possible. 4.

SPECIATED VOC EMISSIONS FROM MODERN GDI LIGHT ...

EPA Pesticide Factsheets

Chassis dynamometer emissions testing was conducted to characterize speciated volatile organic compounds (VOCs), including mobile source air toxics (MSATs) and ozone precursors, in exhaust emissions from three modern gasoline direct injection (GDI) light-duty vehicles. Each GDI vehicle tested in this study utilized slightly different fuel injection technology: Vehicle 1 used a 2.4 liter, naturally aspirated, wall-guided GDI; Vehicle 2 used a 1.8 liter, turbocharged GDI engine; Vehicle 3 used a 1.5 liter, turbocharged, spray-guided GDI engine. Vehicle testing was conducted in a temperature controlled chassis dynamometer test cell at 22 °C over the EPA Federal Test Procedure (FTP) and a portion of the Supplemental FTP (SFTP). The FTP was conducted as a three phase cycle with a cold start, hot transient, and warm start phase (also known as the FTP-75 driving cycle). The SFTP consisted of the US06 driving cycle (conducted without the vehicle’s air conditioning on), which provides a more aggressive driving pattern than the FTP. The vehicles operated on 10 percent ethanol blended gasoline (E10). VOC emissions from diluted vehicle exhaust were sampled over each FTP phase and over the Supplemental FTP with SUMMA canisters for EPA Method TO-15 analysis and with DNPH cartridges for carbonyl analysis by EPA Method TO-11A. This presentation will report the impact of driving cycle and GDI technology on speciated MSAT emissions. MSAT emission rates will be compared

Decades-scale degradation of commercial, side-chain, fluorotelomer-based polymers in soils and water.

PubMed

Washington, John W; Jenkins, Thomas M; Rankin, Keegan; Naile, Jonathan E

2015-01-20

Fluorotelomer-based polymers (FTPs) are the primary product of the fluorotelomer industry. Here we report on a 376-day study of the degradability of two commercial acrylate-linked FTPs in four saturated soils and in water. Using an exhaustive serial extraction, we report GC/MS and LC/MS/MS results for 50 species including fluorotelomer alcohols and acids, and perfluorocarboxylates. Modeling of seven sampling rounds, each consisting of ≥5 replicate microcosm treatments, for one commercial FTP in one soil yielded half-life estimates of 65–112 years and, when the other commercial FTP and soils were evaluated, the estimated half-lives ranged from 33 to 112 years. Experimental controls, consisting of commercial FTP in water, degraded roughly at the same rate as in soil. A follow-up experiment, with commercial FTP in pH 10 water, degraded roughly 10-fold faster than the circum-neutral control suggesting that commercial FTPs can undergo OH–-mediated hydrolysis. 8:2Fluorotelomer alcohol generated from FTP degradation in soil was more stable than without FTP present suggesting a clathrate guest–host association with the FTP. To our knowledge, these are the only degradability-test results for commercial FTPs that have been generated using exhaustive extraction procedures. They unambiguously show that commercial FTPs, the primary product of the fluorotelomer industry, are a source of fluorotelomer and perfluorinated compounds to the environment.

Rapid autocatalytic activation of the M4 metalloprotease aureolysin is controlled by a conserved N-terminal fungalysin-thermolysin-propeptide domain.

PubMed

Nickerson, Nicholas N; Joag, Vineet; McGavin, Martin J

2008-09-01

The Staphylococcus aureus proteolytic cascade consists of a metalloprotease aureolysin (Aur), which activates a serine protease zymogen proSspA, which in turn activates the SspB cysteine protease. As with other M4 metalloproteases, including elastase of Pseudomonas aeruginosa, the propeptide of proAur contains an N-terminal fungalysin-thermolysin-propeptide (FTP) domain. Autocatalytic activation of proAur was initiated by processing at T85 downward arrowL(86) in the FTP domain. This differed from the mechanism described for proElastase, where the FTP domain has an RY motif in place of TL(86), and processing occurred at the junction of the propeptide and metalloprotease domains, which remained as an inactive complex during passage across the outer membrane. When TL(86) in the FTP domain was replaced with RY, an intact N-terminal propeptide was secreted, but the M4 metalloprotease domain was degraded. Consequently, this segment of the FTP domain promotes intramolecular processing of proAur while bestowing a chaperone function, but discourages processing within the FTP domain of proElastase, where activation must be co-ordinated with passage across a second membrane. We conclude that the FTP domain of proAur is adapted to facilitate a rapid autocatalytic activation mechanism, consistent with the role or proAur as initiator of the staphylococcal proteolytic cascade.

40 CFR 86.164-00 - Supplemental Federal Test Procedure calculations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... test schedules of FTP, US06, and SC03. (b) The provisions of § 86.144-94(a) are applicable to this section. These provisions provide the procedures for determining the weighted mass emissions for the FTP... emissions per mile for a particular pollutant weighted in terms of the contributions from the FTP, SC03, and...

Optimized two-frequency phase-measuring-profilometry light-sensor temporal-noise sensitivity.

PubMed

Li, Jielin; Hassebrook, Laurence G; Guan, Chun

2003-01-01

Temporal frame-to-frame noise in multipattern structured light projection can significantly corrupt depth measurement repeatability. We present a rigorous stochastic analysis of phase-measuring-profilometry temporal noise as a function of the pattern parameters and the reconstruction coefficients. The analysis is used to optimize the two-frequency phase measurement technique. In phase-measuring profilometry, a sequence of phase-shifted sine-wave patterns is projected onto a surface. In two-frequency phase measurement, two sets of pattern sequences are used. The first, low-frequency set establishes a nonambiguous depth estimate, and the second, high-frequency set is unwrapped, based on the low-frequency estimate, to obtain an accurate depth estimate. If the second frequency is too low, then depth error is caused directly by temporal noise in the phase measurement. If the second frequency is too high, temporal noise triggers ambiguous unwrapping, resulting in depth measurement error. We present a solution for finding the second frequency, where intensity noise variance is at its minimum.

40 CFR 600.113-08 - Fuel economy calculations for FTP, HFET, US06, SC03 and cold temperature FTP tests.

Code of Federal Regulations, 2012 CFR

2012-07-01

... economy values require input of the weighted grams/mile values for total hydrocarbons (HC), carbon... the weighted grams/mile values for the FTP test for HC, CO and CO2; and, additionally for methanol... paragraph (f) of this section. (2) Calculate separately the grams/mile values for the cold transient phase...

40 CFR 86.164-08 - Supplemental Federal Test Procedure calculations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... for the test schedules of FTP, US06, and SC03. (b) The provisions of § 86.144-94(a) are applicable to... the FTP test schedule (Ywm). (c)(1) When the test vehicle is equipped with air conditioning, the final... = Mass emissions per mile for a particular pollutant weighted in terms of the contributions from the FTP...

40 CFR 85.525 - Applicable standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... on FTP test results from the emission data vehicle (EDV) representing the pre-conversion test group. The sum of CO2, CH4, and N2O shall be calculated for pre- and post-conversion FTP test results, where... group. The sum of CO2, CH4, and N2O shall be calculated for pre- and post-conversion FTP test results...

Comparisons between real and complex Gauss wavelet transform methods of three-dimensional shape reconstruction

NASA Astrophysics Data System (ADS)

Xu, Luopeng; Dan, Youquan; Wang, Qingyuan

2015-10-01

The continuous wavelet transform (CWT) introduces an expandable spatial and frequency window which can overcome the inferiority of localization characteristic in Fourier transform and windowed Fourier transform. The CWT method is widely applied in the non-stationary signal analysis field including optical 3D shape reconstruction with remarkable performance. In optical 3D surface measurement, the performance of CWT for optical fringe pattern phase reconstruction usually depends on the choice of wavelet function. A large kind of wavelet functions of CWT, such as Mexican Hat wavelet, Morlet wavelet, DOG wavelet, Gabor wavelet and so on, can be generated from Gauss wavelet function. However, so far, application of the Gauss wavelet transform (GWT) method (i.e. CWT with Gauss wavelet function) in optical profilometry is few reported. In this paper, the method using GWT for optical fringe pattern phase reconstruction is presented first and the comparisons between real and complex GWT methods are discussed in detail. The examples of numerical simulations are also given and analyzed. The results show that both the real GWT method along with a Hilbert transform and the complex GWT method can realize three-dimensional surface reconstruction; and the performance of reconstruction generally depends on the frequency domain appearance of Gauss wavelet functions. For the case of optical fringe pattern of large phase variation with position, the performance of real GWT is better than that of complex one due to complex Gauss series wavelets existing frequency sidelobes. Finally, the experiments are carried out and the experimental results agree well with our theoretical analysis.

[Leipzig fast-track protocol for cardio-anesthesia. Effective, safe and economical].

PubMed

Häntschel, D; Fassl, J; Scholz, M; Sommer, M; Funkat, A K; Wittmann, M; Ender, J

2009-04-01

In November 2005 a complex, multimodal anesthesia fast-track protocol (FTP) was introduced for elective cardiac surgery patients in the Cardiac Center of the University of Leipzig which included changing from an opioid regime to remifentanil and postoperative treatment in a special post-anesthesia recovery and care unit. The goal was to speed up recovery times while maintaining safety and improving costs. A total of 421 patients who underwent the FTP and were treated in the special recovery room were analyzed retrospectively. These patients were compared with patients who had been treated by a standard protocol (SP) prior to instituting the FTP. Primary outcomes were time to extubation, length of stay in the intensive care unit (ICU) and treatment costs. The times to extubation were significantly shorter in the FTP group with 75 min (range 45-110 min) compared to 900 min (range 600-1140 min) in the SP group. Intensive care unit stay and hospital length of stay were also significantly shorter in the FTP group (p<0.01). The reduction of treatment costs of intensive care for FTP patients was 53.5% corresponding to savings of EUR 738 per patient in the FTP group compared with the SP group. The Leipzig fast-track protocol for cardio-anesthesia including the central elements of switching opiate therapy to remifentanil and switching patient recovery to a special post-anesthesia recovery and care unit, shortened therapy times, is safe and economically effective.

Defense Data Network/TOPS-20 Tutorial. An Interative Computer Program.

DTIC Science & Technology

1985-12-01

33 XI. ELECTRONIC MAIL HOST ( EMH )-------------------------- 34 XII. EMACS...contents of text buffer to a file X EXCHANGE , used to search for and replace text Z ZAP, puts your entire file into the print buffer 23 - -° SWITCH...prompt USC-ISIE.ARPA> Sample foreign host command level prompt FTP COMMAND LEVEL COMMANDS COMMAND USE(S) FTP Invokes the FTP protocol CONNECT Connects

Bidirectional Associations Between Future Time Perspective and Substance Use Among Continuation High-School Students

PubMed Central

Barnett, Elizabeth; Spruijt-Metz, Donna; Unger, Jennifer B.; Rohrbach, Louise Ann; Sun, Ping; Sussman, Steve

2014-01-01

We examined whether a bidirectional, longitudinal relationship exists between future time perspective (FTP), measured with the Zimbardo Time Perspective Inventory, and any past 30-day use of alcohol, tobacco, marijuana, or hard drugs among continuation high school students (N = 1,310, mean age 16.8 years) in a large urban area. We found increased FTP to be protective against drug use for all substances except alcohol. While any baseline use of substances did not predict changes in FTP 1 year later. The discussion explores why alcohol findings may differ from other substances. Future consideration of FTP as a mediator of program effects is explored. PMID:23750661

Management of the treatment delay in symptomatic carotid artery stenosis.

PubMed

Stiehm, Markus; Björses, Katarina; Kremer, Christine

2013-01-01

Saving time to intervention is crucial in patients with symptomatic carotid artery stenosis (SCAS). We introduced a fast-track protocol (FTP). Time frames from the onset of symptoms to intervention before and after the introduction of an FTP were analyzed. SCAS patients (403 patients/405 procedures) were evaluated according to whether surgery was performed before (group 1) or after (group 2) the introduction of the FTP. Time frames to surgery, causes of delay and frequency of recurrent events are reported. The median time delay decreased from 17 to 12 days (p<0.001), but time to ultrasound examination remained unchanged. Surgery was within 2 weeks in 41% in group 1 and in 57% in group 2 (p=0.001). Of 181 (30%) patients treated according to the FTP, 54 were operated within 7 days (median), and 80% had the intervention within 2 weeks. Time to surgery decreased significantly after the introduction of the FTP. © 2013 S. Karger AG, Basel.

40 CFR 600.113-12 - Fuel economy and carbon-related exhaust emission calculations for FTP, HFET, US06, SC03 and cold...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Fuel economy and carbon-related exhaust emission calculations for FTP, HFET, US06, SC03 and cold temperature FTP tests. 600.113-12 Section 600.113-12 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF...

40 CFR 600.113-12 - Fuel economy and carbon-related exhaust emission calculations for FTP, HFET, US06, SC03 and cold...

Code of Federal Regulations, 2011 CFR

2011-07-01

... weighted grams/mile values for total hydrocarbons (HC), carbon monoxide (CO), and carbon dioxide (CO2); and... input of grams/mile values for nitrous oxide (N2O) and methane (CH4). Emissions shall be determined for...) Calculate the FTP fuel economy. (1) Calculate the weighted grams/mile values for the FTP test for CO2, HC...

FTP Extensions for Variable Protocol Specification

NASA Technical Reports Server (NTRS)

Allman, Mark; Ostermann, Shawn

2000-01-01

The specification for the File Transfer Protocol (FTP) assumes that the underlying network protocols use a 32-bit network address and a 16-bit transport address (specifically IP version 4 and TCP). With the deployment of version 6 of the Internet Protocol, network addresses will no longer be 32-bits. This paper species extensions to FTP that will allow the protocol to work over a variety of network and transport protocols.

[Variation trend and significance of adult tonsil size and tongue position].

PubMed

Bin, X; Zhou, Y

2016-08-05

Objective: The aim of this study is to explore the changing trend and significance of adult tonsil size and tongue position by observing adults in different age groups. Method: Oropharyngeal cavities of 1 060 adults who undergoing health examination and had no history of tonsil surgery were observed. Friedman tongue position (FTP) and tonsil size (TS) were scored according to Friedman's criteria and results were statistic analyzed to evaluate their changing law and significance. Result: Mean FTP scores increased with age significantly（ P <0.01）; FTP score in male was lower than that in female（ P <0.01）. TS score significantly decreased with age（ P <0.05）.The average score of TS had no statistical significance in different gender. Although there was no statistical significance, total score of FTP show an increasing trend with age（ P >0.05）;Total scores of FTP were different between sexes（male 4.12±0.67，female 4.23±0.68， P <0.05）.BMI was not found to be statistically different when FTP scores, TS scores and total scores changed ( P >0.05); but it showed an increasing trend with age（ P <0.01）. Conclusion: Width of pharyngeal cavity in normal adults is always kept in certain stability, while it proves to be narrower in obese people. TS score and FTP score, which appear the opposite trend with age, can be thought as a major factor to keep a stable width of oral pharyngeal cavity. Copyright© by the Editorial Department of Journal of Clinical Otorhinolaryngology Head and Neck Surgery.

Comparison of a field-based test to estimate functional threshold power and power output at lactate threshold.

PubMed

Gavin, Timothy P; Van Meter, Jessica B; Brophy, Patricia M; Dubis, Gabriel S; Potts, Katlin N; Hickner, Robert C

2012-02-01

It has been proposed that field-based tests (FT) used to estimate functional threshold power (FTP) result in power output (PO) equivalent to PO at lactate threshold (LT). However, anecdotal evidence from regional cycling teams tested for LT in our laboratory suggested that PO at LT underestimated FTP. It was hypothesized that estimated FTP is not equivalent to PO at LT. The LT and estimated FTP were measured in 7 trained male competitive cyclists (VO2max = 65.3 ± 1.6 ml O2·kg(-1)·min(-1)). The FTP was estimated from an 8-minute FT and compared with PO at LT using 2 methods; LT(Δ1), a 1 mmol·L(-1) or greater rise in blood lactate in response to an increase in workload and LT(4.0), blood lactate of 4.0 mmol·L(-1). The estimated FTP was equivalent to PO at LT(4.0) and greater than PO at LT(Δ1). VO2max explained 93% of the variance in individual PO during the 8-minute FT. When the 8-minute FT PO was expressed relative to maximal PO from the VO2max test (individual exercise performance), VO2max explained 64% of the variance in individual exercise performance. The PO at LT was not related to 8-minute FT PO. In conclusion, FTP estimated from an 8-minute FT is equivalent to PO at LT if LT(4.0) is used but is not equivalent for all methods of LT determination including LT(Δ1).

Validation of 18F-fluoro-4-thia-palmitate as a PET probe for myocardial fatty acid oxidation: effects of hypoxia and composition of exogenous fatty acids.

PubMed

DeGrado, Timothy R; Kitapci, Mehmet T; Wang, Shuyan; Ying, Jun; Lopaschuk, Gary D

2006-01-01

Fatty acid oxidation (FAO) is the predominant energy-producing pathway in the healthy heart. Abnormalities in FAO are associated with many ischemic and nonischemic disease states. The aim of the present study was to further validate 16-[(18)F]-fluoro-4-thia-palmitate ((18)F-FTP) as a metabolically trapped FAO probe in the isolated perfused rat heart model by examining both the effects of hypoxia and the effects of changes in exogenous fatty acid availability. Hearts were excised from Sprague-Dawley rats and perfused in the Langendorff mode with Krebs-Henseleit solution under the following conditions: palmitate at 0.4 mmol/L with 95% oxygen, palmitate at 0.4 mmol/L with 35% oxygen, palmitate at 0.2 mmol/L plus oleate at 0.2 mmol/L with 95% oxygen, and palmitate at 0.2 mmol/L plus oleate at 0.2 mmol/L with 35% oxygen. Hearts were paced at 270 beats per minute, and the rate of left ventricular pressure change (LV dP/dt) was monitored. (18)F-FTP in the perfusion medium was administered for 20 min, and this step was followed by a 20-min washout period without tracer in the perfusion medium. (18)F kinetics in the whole heart were monitored externally, and the time-activity curves were analyzed to determine the fractional trapping rate for (18)F-FTP (FTR(FTP)). A "lumped constant" (LC) was defined as the ratio of FTR(FTP) to the fractional rate of oxidation of fatty acid in the perfusion medium. The kinetic data for (18)F-FTP demonstrated metabolic trapping of (18)F radioactivity that was insensitive to changes in the mixture of fatty acids in the perfusion medium but that was sensitive to the inhibition of mitochondrial FAO by hypoxia. LV dP/dt was reduced 47%-67% in hypoxic hearts relative to hearts with normal oxygenation (controls). FAO rates for palmitate and oleate were similar in group 3 (palmitate alone) and group 4 (palmitate and oleate). FAO was decreased 70%-76% with hypoxia, whereas FTR(FTP) was reduced 86%-88%, demonstrating hypersensitivity of a change in (18)F-FTP retention to FAO inhibition by oxygen deprivation. The (18)F-FTP LC was approximately 2 in myocardium with normal oxygenation and fell to 1.0-1.2 in hypoxic myocardium. The results confirm (18)F-FTP to be a metabolically trapped palmitate analog that is capable of indicating rates of myocardial oxidation of exogenous long-chain fatty acids. The heterogeneous nature of fatty acids in plasma does not alter the quantitative analysis of (18)F-FTP kinetics. However, the decreased LC value in hypoxic myocardium suggests the need to develop an understanding of the relationship of (18)F-FTP processing to natural fatty acids at key limiting transport and metabolism processes, analogous to previous studies examining the LC values for radiolabeled deoxyglucose tracers used to estimate the glucose metabolic rate.

Qualitative and quantitative evaluation of human dental enamel after bracket debonding: a noncontact three-dimensional optical profilometry analysis.

PubMed

Ferreira, Fabiano G; Nouer, Darcy F; Silva, Nelson P; Garbui, Ivana U; Correr-Sobrinho, Lourenço; Nouer, Paulo R A

2014-09-01

The aim of this study was to undertake a qualitative and quantitative evaluation of changes on enamel surfaces after debonding of brackets followed by finishing procedures, using a high-resolution three-dimensional optical profiler and to investigate the accuracy of the technique. The labial surfaces of 36 extracted upper central incisors were examined. Before bonding, the enamel surfaces were subjected to profilometry, recording four amplitude parameters. Brackets were then bonded using two types of light-cured orthodontic adhesive: composite resin and resin-modified glass ionomer cement. Finishing was performed by three different methods: pumice on a rubber cup, fine and ultrafine aluminum oxide discs, and microfine diamond cups followed by silicon carbide brushes. The samples were subsequently re-analyzed by profilometry. Wilcoxon signed-rank test, Kruskal-Wallis test (p < 0.05) and a posteriori Mann-Whitney U test with Bonferroni correction (p < 0.0167) revealed a significant reduction of enamel roughness when diamond cups followed by silicon carbide brushes were used to finish surfaces that had remnants of resin-modified glass ionomer adhesive and when pumice was used to finish surfaces that had traces of composite resin. Enamel loss was minimal. The 3D optical profilometry technique was able to provide accurate qualitative and quantitative assessment of changes on the enamel surface after debonding. Morphological changes in the topography of dental surfaces, especially if related to enamel loss and roughness, are of considerable clinical importance. The quantitative evaluation method used herein enables a more comprehensive understanding of the effects of orthodontic bonding on teeth.

Analysis of Black Bearing Balls from a Space Shuttle Body Flap Actuator

NASA Technical Reports Server (NTRS)

Sovinski, Marjorie F.; Street, Kenneth W.

2005-01-01

A significantly deteriorated ball bearing mechanism from a body flap actuator on Space Shuttle OV-103 was disassembled and the balls submitted for analysis in conjunction with Return to Flight activities. The OV-103 balls, referred to as the "black balls", were subjected to X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FT-IR) and Raman micro spectroscopy, surface profilometry, and optical and electron microscopy. The spectroscopic results in combination with microscopy analysis allowed a determination of the lubricant degradation pathway. The chemical attack mechanism does not adequately explain the unique visual appearance of the black balls. Numerous efforts have unsuccessfully focused on duplication of the phenomena causing this unique surface structure and appearance of the black balls. Further detail will be presented supporting these conclusions along with plausible explanations of the unique black appearance to the balls.

THz holography in reflection using a high resolution microbolometer array.

PubMed

Zolliker, Peter; Hack, Erwin

2015-05-04

We demonstrate a digital holographic setup for Terahertz imaging of surfaces in reflection. The set-up is based on a high-power continuous wave (CW) THz laser and a high-resolution (640 × 480 pixel) bolometer detector array. Wave propagation to non-parallel planes is used to reconstruct the object surface that is rotated relative to the detector plane. In addition we implement synthetic aperture methods for resolution enhancement and compare Fourier transform phase retrieval to phase stepping methods. A lateral resolution of 200 μm and a relative phase sensitivity of about 0.4 rad corresponding to a depth resolution of 6 μm are estimated from reconstructed images of two specially prepared test targets, respectively. We highlight the use of digital THz holography for surface profilometry as well as its potential for video-rate imaging.

Advanced optical manufacturing and testing; Proceedings of the Meeting, San Diego, CA, July 9-11, 1990

NASA Astrophysics Data System (ADS)

Sanger, Gregory M.; Reid, Paul B.; Baker, Lionel R.

1990-11-01

Consideration is given to advanced optical fabrication, profilometry and thin films, and metrology. Particular attention is given to automation for optics manufacturing, 3D contouring on a numerically controlled grinder, laser-scanning lens configurations, a noncontact precision measurement system, novel noncontact profiler design for measuring synchrotron radiation mirrors, laser-diode technologies for in-process metrology, measurements of X-ray reflectivities of Au-coatings at several energies, platinum coating of an X-ray mirror for SR lithography, a Hilbert transform algorithm for fringe-pattern analysis, structural error sources during fabrication of the AXAF optical elements, an in-process mirror figure qualification procedure for large deformable mirrors, interferometric evaluation of lenslet arrays for 2D phase-locked laser diode sources, and manufacturing and metrology tooling for the solar-A soft X-ray telescope.

Social network, autonomy, and adherence correlates of future time perspective in patients with head and neck cancer.

PubMed

Baldensperger, Linda; Wiedemann, Amelie U; Wessel, Lauri; Keilholz, Ulrich; Knoll, Nina

2018-06-01

Socioemotional selectivity theory proposes that, with more limited future time perspective (FTP), the meaning of individual life goals shifts from instrumental and long-term goals, such as autonomy, to emotionally meaningful and short-term life goals, especially concerning meaningful social relationships. Adverse side effects of cancer therapy may conflict with the realization of emotionally meaningful goals leading to nonadherence. In line with the theoretical assumptions, this study aimed to investigate (a) associations among disease symptoms, physical and cognitive limitations, and FTP and (b) among FTP, family network size, striving for autonomy, and treatment adherence. One hundred fifty-seven patients (43-90 years; 75% male) with head and/or neck cancer of a German University Medical Centre completed a questionnaire measuring FTP, age, disease symptoms, physical and cognitive functioning, family network size, and treatment adherence. Autonomy was assessed with a card sort task. A structural equation model yielded an acceptable fit χ 2 (28) = 44.41, P = .025, χ 2 /df = 1.59, root mean square error of approximation = 0.06 (90% CI = 0.02, 0.09), Tucker-Lewis Index = 0.92, and Comparative Fit Index = 0.96. An increased level of disease symptoms and physical and cognitive limitations was related to a shorter subjective FTP. Furthermore, individuals with a limited FTP reported a smaller family network, a lowered quest for autonomy, and lower treatment adherence. Hypotheses derived from socioemotional selectivity theory were supported by the data. Longitudinal investigations should follow to corroborate findings and to focus on underlying mechanisms as improving patients FTP may play a crucial role in future disease management programs. Copyright © 2018 John Wiley & Sons, Ltd.

Flortaucipir tau PET imaging in semantic variant primary progressive aphasia.

PubMed

Makaretz, Sara J; Quimby, Megan; Collins, Jessica; Makris, Nikos; McGinnis, Scott; Schultz, Aaron; Vasdev, Neil; Johnson, Keith A; Dickerson, Bradford C

2017-10-06

The semantic variant of primary progressive aphasia (svPPA) is typically associated with frontotemporal lobar degeneration (FTLD) with longTAR DNA-binding protein (TDP)-43-positive neuropil threads and dystrophic neurites (type C), and is only rarely due to a primary tauopathy or Alzheimer's disease. We undertook this study to investigate the localisation and magnitude of the presumed tau Positron Emission Tomography (PET) tracer [ 18 F]Flortaucipir (FTP; also known as T807 or AV1451) in patients with svPPA, hypothesising that most patients would not show tracer uptake different from controls. FTP and [ 11 C]Pittsburgh compound B PET imaging as well as MRI were performed in seven patients with svPPA and in 20 controls. FTP signal was analysed by visual inspection and by quantitative comparison to controls, with and without partial volume correction. All seven patients showed elevated FTP uptake in the anterior temporal lobe with a leftward asymmetry that was not observed in healthy controls. This elevated FTP signal, largely co-localised with atrophy, was evident on both visual inspection and quantitative cortical surface-based analysis. Five patients were amyloid negative, one was amyloid positive and one has an unknown amyloid status. In this series of patients with clinical profiles, structural MRI and amyloid PET imaging typical for svPPA, FTP signal was unexpectedly elevated with a spatial pattern localised to areas of atrophy. This raises questions about the possible off-target binding of this tracer to non-tau molecules associated with neurodegeneration. Further investigation with autopsy analysis will help illuminate the binding target(s) of FTP in cases of suspected FTLD-TDP neuropathology. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Fast track pathway reduces sight loss in giant cell arteritis: results of a longitudinal observational cohort study.

PubMed

Patil, P; Williams, M; Maw, W W; Achilleos, K; Elsideeg, S; Dejaco, C; Borg, F; Gupta, S; Dasgupta, B

2015-01-01

To investigate the effectiveness of a fast track pathway (FTP) on sight loss in patients with suspected giant cell arteritis (GCA). A longitudinal observational cohort study was conducted in the secondary care rheumatology department. One hundred and thirty-five newly referred suspected GCA patients seen via the FTP (Jan. 2012-Dec. 2013) were compared to 81 patients seen through the conventional referral and review system (Jan. 2009-Dec. 2011). The FTP resulted in significant reduction in irreversible sight loss from 37.0% (as seen in the historical cohort 2009-2011) to 9.0 % (2012-2013, OR 0.17, p=0.001). Adjustment for clinical and demographic parameters including known risk factors for GCA associated blindness did not significantly change the primary result (OR 0.08, p=0.001). FTP resulted in a reduction of time from symptom onset to diagnosis, particularly by reduction of time from general practitioner's (GP) referral to the rheumatology review (79% of FTP patients were seen within one working day compared to 64.6 % in the conventional pathway, p=0.023). The FTP has seen a reduction in number of GP appointments. There was a significant reduction of permanent sight loss with a fast track GCA pathway. The effect may be due to multiple factors including better GP education and reduction in delayed diagnosis. These results need verification at other sites.

Characterization of a Diamond Ground Y-TZP and Reversion of the Tetragonal to Monoclinic Transformation.

PubMed

Candido, L M; Fais, Lmg; Ferreira, E B; Antonio, S G; Pinelli, Lap

To characterize the surface of an yttria-stabilized zirconia (Y-TZP) ceramic after diamond grinding in terms of its crystalline phase, morphology, mean roughness (Ra), and wettability as well as to determine a thermal treatment to reverse the resulting tetragonal to monoclinic (t-m) transformation. Y-TZP specimens were distributed into different groups according to the actions (or no action) of grinding and irrigation. Grinding was accomplished using a diamond stone at a low speed. The samples were characterized by x-ray diffraction (XRD), scanning electron microscopy, goniometry, and profilometry. In situ high-temperature XRD was used to determine an annealing temperature to reverse the t-m transformation. Ra was submitted to the Kruskal-Wallis test, followed by the Dunn test (α=0.05). The volume fraction of the monoclinic phase and contact angle were submitted to one-way analysis of variance, followed by the Tukey test (α=0.05). Monoclinic zirconia was observed on the surface of samples after dry and wet grinding with a diamond stone. The volume fraction of the monoclinic phase was smaller on the dry ground samples (3.6%±0.3%) than on the wet ground samples (5.6%±0.3%). High-temperature XRD showed reversion of the t-m phase transformation, which started at 700°C and completed at 800°C in a conventional oven. Grinding with a diamond stone partially transformed the crystalline phase on the surface of a Y-TZP ceramic from tetragonal to monoclinic zirconia while simultaneously increasing the surface roughness and wettability. The t-m transformation could be reversed by heat treatment at 800°C or 900°C for 60 minutes or 1000°C for 30 minutes.

Adults' future time perspective predicts engagement in physical activity.

PubMed

Stahl, Sarah T; Patrick, Julie Hicks

2012-07-01

Our aim was to examine how the relations among known predictors of physical activity, such as age, sex, and body mass index, interact with future time perspective (FTP) and perceived functional limitation to explain adults' engagement in physical activity. Self-report data from 226 adults (range 20-88 years) were collected to examine the hypothesis that a more expansive FTP is associated with engagement in physical activity. Results indicated a good fit of the data to the model χ(2) (4, N = 226) = 7.457, p = .14 and accounted for a moderate amount of variance in adults' physical activity (R(2) = 15.7). Specifically, results indicated that perceived functional limitation (β = -.140) and FTP (β = .162) were directly associated with physical activity. Age was indirectly associated with physical activity through its association with perceived functional limitation (β = -.264) and FTP (β = .541). Results indicate that FTP may play an important role in explaining engagement in health promoting behaviors across the life span. Researchers should consider additional constructs and perhaps adopt socioemotional selectivity theory when explaining adults' engagement in physical activity.

The chemical component dictionary: complete descriptions of constituent molecules in experimentally determined 3D macromolecules in the Protein Data Bank

PubMed Central

Westbrook, John D.; Shao, Chenghua; Feng, Zukang; Zhuravleva, Marina; Velankar, Sameer; Young, Jasmine

2015-01-01

Summary: The Chemical Component Dictionary (CCD) is a chemical reference data resource that describes all residue and small molecule components found in Protein Data Bank (PDB) entries. The CCD contains detailed chemical descriptions for standard and modified amino acids/nucleotides, small molecule ligands and solvent molecules. Each chemical definition includes descriptions of chemical properties such as stereochemical assignments, chemical descriptors, systematic chemical names and idealized coordinates. The content, preparation, validation and distribution of this CCD chemical reference dataset are described. Availability and implementation: The CCD is updated regularly in conjunction with the scheduled weekly release of new PDB structure data. The CCD and amino acid variant reference datasets are hosted in the public PDB ftp repository at ftp://ftp.wwpdb.org/pub/pdb/data/monomers/components.cif.gz, ftp://ftp.wwpdb.org/pub/pdb/data/monomers/aa-variants-v1.cif.gz, and its mirror sites, and can be accessed from http://wwpdb.org. Contact: jwest@rcsb.rutgers.edu. Supplementary information: Supplementary data are available at Bioinformatics online. PMID:25540181

Two-Wavelength Multi-Gigahertz Frequency Comb-Based Interferometry for Full-Field Profilometry

NASA Astrophysics Data System (ADS)

Choi, Samuel; Kashiwagi, Ken; Kojima, Shuto; Kasuya, Yosuke; Kurokawa, Takashi

2013-10-01

The multi-gigahertz frequency comb-based interferometer exhibits only the interference amplitude peak without the phase fringes, which can produce a rapid axial scan for full-field profilometry and tomography. Despite huge technical advantages, there remain problems that the interference intensity undulations occurred depending on the interference phase. To avoid such problems, we propose a compensation technique of the interference signals using two frequency combs with slightly varied center wavelengths. The compensated full-field surface profile measurements of cover glass and onion skin were demonstrated experimentally to verify the advantages of the proposed method.

Blind color isolation for color-channel-based fringe pattern profilometry using digital projection

NASA Astrophysics Data System (ADS)

Hu, Yingsong; Xi, Jiangtao; Chicharo, Joe; Yang, Zongkai

2007-08-01

We present an algorithm for estimating the color demixing matrix based on the color fringe patterns captured from the reference plane or the surface of the object. The advantage of this algorithm is that it is a blind approach to calculating the demixing matrix in the sense that no extra images are required for color calibration before performing profile measurement. Simulation and experimental results convince us that the proposed algorithm can significantly reduce the influence of the color cross talk and at the same time improve the measurement accuracy of the color-channel-based phase-shifting profilometry.

A Profilometry-Based Dentifrice Abrasion Method for V8 Brushing Machines Part III: Multi-Laboratory Validation Testing of RDA-PE.

PubMed

Schneiderman, Eva; Colón, Ellen L; White, Donald J; Schemehorn, Bruce; Ganovsky, Tara; Haider, Amir; Garcia-Godoy, Franklin; Morrow, Brian R; Srimaneepong, Viritpon; Chumprasert, Sujin

2017-09-01

We have previously reported on progress toward the refinement of profilometry-based abrasivity testing of dentifrices using a V8 brushing machine and tactile or optical measurement of dentin wear. The general application of this technique may be advanced by demonstration of successful inter-laboratory confirmation of the method. The objective of this study was to explore the capability of different laboratories in the assessment of dentifrice abrasivity using a profilometry-based evaluation technique developed in our Mason laboratories. In addition, we wanted to assess the interchangeability of human and bovine specimens. Participating laboratories were instructed in methods associated with Radioactive Dentin Abrasivity-Profilometry Equivalent (RDA-PE) evaluation, including site visits to discuss critical elements of specimen preparation, masking, profilometry scanning, and procedures. Laboratories were likewise instructed on the requirement for demonstration of proportional linearity as a key condition for validation of the technique. Laboratories were provided with four test dentifrices, blinded for testing, with a broad range of abrasivity. In each laboratory, a calibration curve was developed for varying V8 brushing strokes (0, 4,000, and 10,000 strokes) with the ISO abrasive standard. Proportional linearity was determined as the ratio of standard abrasion mean depths created with 4,000 and 10,000 strokes (2.5 fold differences). Criteria for successful calibration within the method (established in our Mason laboratory) was set at proportional linearity = 2.5 ± 0.3. RDA-PE was compared to Radiotracer RDA for the four test dentifrices, with the latter obtained by averages from three independent Radiotracer RDA sites. Individual laboratories and their results were compared by 1) proportional linearity and 2) acquired RDA-PE values for test pastes. Five sites participated in the study. One site did not pass proportional linearity objectives. Data for this site are not reported at the request of the researchers. Three of the remaining four sites reported herein tested human dentin and all three met proportional linearity objectives for human dentin. Three of four sites participated in testing bovine dentin and all three met the proportional linearity objectives for bovine dentin. RDA-PE values for test dentifrices were similar between sites. All four sites that met proportional linearity requirement successfully identified the dentifrice formulated above the industry standard 250 RDA (as RDA-PE). The profilometry method showed at least as good reproducibility and differentiation as Radiotracer assessments. It was demonstrated that human and bovine specimens could be used interchangeably. The standardized RDA-PE method was reproduced in multiple laboratories in this inter-laboratory study. Evidence supports that this method is a suitable technique for ISO method 11609 Annex B.

Rapid recovery from transient faults in the fault-tolerant processor with fault-tolerant shared memory

NASA Technical Reports Server (NTRS)

Harper, Richard E.; Butler, Bryan P.

1990-01-01

The Draper fault-tolerant processor with fault-tolerant shared memory (FTP/FTSM), which is designed to allow application tasks to continue execution during the memory alignment process, is described. Processor performance is not affected by memory alignment. In addition, the FTP/FTSM incorporates a hardware scrubber device to perform the memory alignment quickly during unused memory access cycles. The FTP/FTSM architecture is described, followed by an estimate of the time required for channel reintegration.

How do I obtain CERES data?

Atmospheric Science Data Center

2017-10-12

Order online ASDC Web Ordering Tool data available for ftp download. Order online CERES Subsetter Ordering Page data available for ftp download. Order online Earthdata Search Tool data available for download. Download the ...

Precision of 655nm Confocal Laser Profilometry for 3D surface texture characterisation of natural human enamel undergoing dietary acid mediated erosive wear.

PubMed

Mullan, F; Mylonas, P; Parkinson, C; Bartlett, D; Austin, R S

2018-03-01

To assess the precision of optical profilometry for characterising the 3D surface roughness of natural and polished human enamel in order to reliably quantify acid mediated surface roughness changes in human enamel. Forty-two enamel samples were prepared from extracted human molars and either polished flat or left unmodified. To investigate precision, the variability of thirty repeated measurements of five areas of one polished and one natural enamel sample was assessed using 655nm Confocal Laser Profilometry. Remaining samples were subjected to forty-five minutes orange juice erosion and microstructural changes were analysed using Sa roughness change (μm) and qualitatively using surface/subsurface confocal microscopy. Enamel surface profilometry from the selected areas revealed maximal precision of 5nm for polished enamel and 23nm for natural enamel. After erosion, the polished enamel revealed a 48% increase in mean (SD) Sa roughness of 0.10 (0.07)μm (P<0.05), whereas in contrast the natural enamel revealed a 45% decrease in mean (SD) roughness of -0.32 (0.42)μm (P<0.05). These data were supported by qualitative confocal images of the surface/subsurface enamel. This study demonstrates a method for precise surface texture measurement of natural human enamel. Measurement precision was superior for polished flat enamel in contrast to natural enamel however, natural enamel responds very differently to polished enamel when exposed to erosion challenges. Therefore, thus future studies characterising enamel surface changes following erosion on natural enamel may provide more clinically relevant responses in comparison to polished enamel. Copyright © 2017 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

A prospective population-based study of maternal, fetal, and neonatal outcomes in the setting of prolonged labor, obstructed labor and failure to progress in low- and middle-income countries.

PubMed

Harrison, Margo S; Ali, Sumera; Pasha, Omrana; Saleem, Sarah; Althabe, Fernando; Berrueta, Mabel; Mazzoni, Agustina; Chomba, Elwyn; Carlo, Waldemar A; Garces, Ana; Krebs, Nancy F; Hambidge, K; Goudar, Shivaprasad S; Dhaded, S M; Kodkany, Bhala; Derman, Richard J; Patel, Archana; Hibberd, Patricia L; Esamai, Fabian; Liechty, Edward A; Moore, Janet L; Koso-Thomas, Marion; McClure, Elizabeth M; Goldenberg, Robert L

2015-01-01

This population-based study sought to quantify maternal, fetal, and neonatal morbidity and mortality in low- and middle-income countries associated with obstructed labor, prolonged labor and failure to progress (OL/PL/FTP). A prospective, population-based observational study of pregnancy outcomes was performed at seven sites in Argentina, Guatemala, India (2 sites, Belgaum and Nagpur), Kenya, Pakistan and Zambia. Women were enrolled in pregnancy and delivery and 6-week follow-up obtained to evaluate rates of OL/PL/FTP and outcomes resulting from OL/PL/FTP, including: maternal and delivery characteristics, maternal and neonatal morbidity and mortality and stillbirth. Between 2010 and 2013, 266,723 of 267,270 records (99.8%) included data on OL/PL/FTP with an overall rate of 110.4/1000 deliveries that ranged from 41.6 in Zambia to 200.1 in Pakistan. OL/PL/FTP was more common in women aged <20, nulliparous women, more educated women, women with infants >3500g, and women with a BMI >25 (RR 1.4, 95% CI 1.3 - 1.5), with the suggestion of OL/PL/FTP being less common in preterm deliveries. Protective characteristics included parity of ≥3, having an infant <1500g, and having a BMI <18. Women with OL/PL/FTP were more likely to die within 42 days (RR 1.9, 95% CI 1.4 - 2.4), be infected (RR 1.8, 95% CI 1.5 - 2.2), and have hemorrhage antepartum (RR 2.8, 95% CI 2.1 - 3.7) or postpartum (RR 2.4, 95% CI 1.8 - 3.3). They were also more likely to have a stillbirth (RR 1.6, 95% CI 1.3 - 1.9), a neonatal demise at < 28 days (RR 1.9, 95% CI 1.6 - 2.1), or a neonatal infection (RR 1.2, 95% CI 1.1 - 1.3). As compared to operative vaginal delivery and cesarean section (CS), women experiencing OL/PL/FTP who gave birth vaginally were more likely to become infected, to have an infected neonate, to hemorrhage in the antepartum and postpartum period, and to die, have a stillbirth, or have a neonatal demise. Women with OL/PL/FTP were far more likely to deliver in a facility and be attended by a physician or other skilled provider than women without this diagnosis. Women with OL/PL/FTP in the communities studied were more likely to be primiparous, younger than age 20, overweight, and of higher education, with an infant with birthweight of >3500g. Women with this diagnosis were more likely to experience a maternal, fetal, or neonatal death, antepartum and postpartum hemorrhage, and maternal and neonatal infection. They were also more likely to deliver in a facility with a skilled provider. CS may decrease the risk of poor outcomes (as in the case of antepartum hemorrhage), but unassisted vaginal delivery exacerbates all of the maternal, fetal, and neonatal outcomes evaluated in the setting of OL/PL/FTP.

A prospective population-based study of maternal, fetal, and neonatal outcomes in the setting of prolonged labor, obstructed labor and failure to progress in low- and middle-income countries

PubMed Central

2015-01-01

Background This population-based study sought to quantify maternal, fetal, and neonatal morbidity and mortality in low- and middle-income countries associated with obstructed labor, prolonged labor and failure to progress (OL/PL/FTP). Methods A prospective, population-based observational study of pregnancy outcomes was performed at seven sites in Argentina, Guatemala, India (2 sites, Belgaum and Nagpur), Kenya, Pakistan and Zambia. Women were enrolled in pregnancy and delivery and 6-week follow-up obtained to evaluate rates of OL/PL/FTP and outcomes resulting from OL/PL/FTP, including: maternal and delivery characteristics, maternal and neonatal morbidity and mortality and stillbirth. Results Between 2010 and 2013, 266,723 of 267,270 records (99.8%) included data on OL/PL/FTP with an overall rate of 110.4/1000 deliveries that ranged from 41.6 in Zambia to 200.1 in Pakistan. OL/PL/FTP was more common in women aged <20, nulliparous women, more educated women, women with infants >3500g, and women with a BMI >25 (RR 1.4, 95% CI 1.3 – 1.5), with the suggestion of OL/PL/FTP being less common in preterm deliveries. Protective characteristics included parity of ≥3, having an infant <1500g, and having a BMI <18. Women with OL/PL/FTP were more likely to die within 42 days (RR 1.9, 95% CI 1.4 – 2.4), be infected (RR 1.8, 95% CI 1.5 – 2.2), and have hemorrhage antepartum (RR 2.8, 95% CI 2.1 – 3.7) or postpartum (RR 2.4, 95% CI 1.8 – 3.3). They were also more likely to have a stillbirth (RR 1.6, 95% CI 1.3 – 1.9), a neonatal demise at < 28 days (RR 1.9, 95% CI 1.6 – 2.1), or a neonatal infection (RR 1.2, 95% CI 1.1 – 1.3). As compared to operative vaginal delivery and cesarean section (CS), women experiencing OL/PL/FTP who gave birth vaginally were more likely to become infected, to have an infected neonate, to hemorrhage in the antepartum and postpartum period, and to die, have a stillbirth, or have a neonatal demise. Women with OL/PL/FTP were far more likely to deliver in a facility and be attended by a physician or other skilled provider than women without this diagnosis. Conclusions Women with OL/PL/FTP in the communities studied were more likely to be primiparous, younger than age 20, overweight, and of higher education, with an infant with birthweight of >3500g. Women with this diagnosis were more likely to experience a maternal, fetal, or neonatal death, antepartum and postpartum hemorrhage, and maternal and neonatal infection. They were also more likely to deliver in a facility with a skilled provider. CS may decrease the risk of poor outcomes (as in the case of antepartum hemorrhage), but unassisted vaginal delivery exacerbates all of the maternal, fetal, and neonatal outcomes evaluated in the setting of OL/PL/FTP. PMID:26063492

Effects of Age and Acute Moderate Alcohol Administration on Electrophysiological Correlates of Working Memory Maintenance

PubMed Central

Boissoneault, Jeff; Frazier, Ian; Lewis, Ben; Nixon, Sara Jo

2016-01-01

Background Previous studies suggest older adults may be differentially susceptible to the acute neurobehavioral effects of moderate alcohol intake. To our knowledge, no studies have addressed acute moderate alcohol effects on the electrophysiological correlates of working memory in younger and older social drinkers. This study characterized alcohol-related effects on frontal theta (FTP) and posterior alpha power (PAP) associated with maintenance of visual information during a working memory task. Methods Older (55–70 years of age; n = 51, 29 women) and younger (25–35 years of age; n = 70, 39 women) community-dwelling moderate drinkers were recruited for this study. Participants were given either placebo or an active dose targeting breath alcohol concentrations (BrACs) of 0.04 or 0.065 g/dL. Following absorption, participants completed a visual working memory task assessing cue recognition following a 9s delay. FTP and PAP were determined via Fourier transformation and subjected to 2 (age group) X 3 (dose) X 2 (repeated: working memory task condition) mixed models analysis. Results In addition to expected age-related reductions in PAP, a significant age group X dose interaction was detected for PAP such that 0.04 g/dL dose level was associated with greater PAP in younger adults but lower PAP in their older counterparts. PAP was lower in older vs younger adults at both active doses. Further mixed models revealed a significant negative association between PAP and working memory efficiency for older adults. No effects of age, dose, or their interaction were noted for FTP. Conclusions Results bolster the small but growing body of evidence that older adults exhibit differential sensitivity to the neurobehavioral effects of moderate alcohol use. Given the theoretical role of PAP in attentional and working memory function, these findings shed light on the attentional mechanisms underlying effects of acute moderate alcohol on working memory efficiency in older adults. PMID:27419803

Fourier Transform-Plasmon Waveguide Spectroscopy: A Nondestructive Multifrequency Method for Simultaneously Determining Polymer Thickness and Apparent Index of Refraction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bobbitt, Jonathan M; Weibel, Stephen C; Elshobaki, Moneim

2014-12-16

Fourier transform (FT)-plasmon waveguide resonance (PWR) spectroscopy measures light reflectivity at a waveguide interface as the incident frequency and angle are scanned. Under conditions of total internal reflection, the reflected light intensity is attenuated when the incident frequency and angle satisfy conditions for exciting surface plasmon modes in the metal as well as guided modes within the waveguide. Expanding upon the concept of two-frequency surface plasmon resonance developed by Peterlinz and Georgiadis [ Opt. Commun. 1996, 130, 260], the apparent index of refraction and the thickness of a waveguide can be measured precisely and simultaneously by FT-PWR with an averagemore » percent relative error of 0.4%. Measuring reflectivity for a range of frequencies extends the analysis to a wide variety of sample compositions and thicknesses since frequencies with the maximum attenuation can be selected to optimize the analysis. Additionally, the ability to measure reflectivity curves with both p- and s-polarized light provides anisotropic indices of refraction. FT-PWR is demonstrated using polystyrene waveguides of varying thickness, and the validity of FT-PWR measurements are verified by comparing the results to data from profilometry and atomic force microscopy (AFM).« less

Fourier transform-plasmon waveguide spectroscopy: a nondestructive multifrequency method for simultaneously determining polymer thickness and apparent index of refraction.

PubMed

Bobbitt, Jonathan M; Weibel, Stephen C; Elshobaki, Moneim; Chaudhary, Sumit; Smith, Emily A

2014-12-16

Fourier transform (FT)-plasmon waveguide resonance (PWR) spectroscopy measures light reflectivity at a waveguide interface as the incident frequency and angle are scanned. Under conditions of total internal reflection, the reflected light intensity is attenuated when the incident frequency and angle satisfy conditions for exciting surface plasmon modes in the metal as well as guided modes within the waveguide. Expanding upon the concept of two-frequency surface plasmon resonance developed by Peterlinz and Georgiadis [Opt. Commun. 1996, 130, 260], the apparent index of refraction and the thickness of a waveguide can be measured precisely and simultaneously by FT-PWR with an average percent relative error of 0.4%. Measuring reflectivity for a range of frequencies extends the analysis to a wide variety of sample compositions and thicknesses since frequencies with the maximum attenuation can be selected to optimize the analysis. Additionally, the ability to measure reflectivity curves with both p- and s-polarized light provides anisotropic indices of refraction. FT-PWR is demonstrated using polystyrene waveguides of varying thickness, and the validity of FT-PWR measurements are verified by comparing the results to data from profilometry and atomic force microscopy (AFM).

Uniaxial three-dimensional shape measurement with multioperation modes for different modulation algorithms

NASA Astrophysics Data System (ADS)

Jing, Hailong; Su, Xianyu; You, Zhisheng

2017-03-01

A uniaxial three-dimensional shape measurement system with multioperation modes for different modulation algorithms is proposed. To provide a general measurement platform that satisfies the specific measurement requirements in different application scenarios, a measuring system with multioperation modes based on modulation measuring profilometry (MMP) is presented. Unlike the previous solutions, vertical scanning by focusing control of an electronic focus (EF) lens is implemented. The projection of a grating pattern is based on a digital micromirror device, which means fast phase-shifting with high precision. A field programmable gate array-based master control center board acts as the coordinator of the MMP system; it harmonizes the workflows, such as grating projection, focusing control of the EF lens, and fringe pattern capture. Fourier transform, phase-shifting technique, and temporary Fourier transform are used for modulation analysis in different operation modes. The proposed system features focusing control, speed, programmability, compactness, and availability. This paper details the principle of MMP for multioperation modes and the design of the proposed system. The performances of different operation modes are analyzed and compared, and a work piece with steep holes is measured to verify this multimode MMP system.

The chemical component dictionary: complete descriptions of constituent molecules in experimentally determined 3D macromolecules in the Protein Data Bank.

PubMed

Westbrook, John D; Shao, Chenghua; Feng, Zukang; Zhuravleva, Marina; Velankar, Sameer; Young, Jasmine

2015-04-15

The Chemical Component Dictionary (CCD) is a chemical reference data resource that describes all residue and small molecule components found in Protein Data Bank (PDB) entries. The CCD contains detailed chemical descriptions for standard and modified amino acids/nucleotides, small molecule ligands and solvent molecules. Each chemical definition includes descriptions of chemical properties such as stereochemical assignments, chemical descriptors, systematic chemical names and idealized coordinates. The content, preparation, validation and distribution of this CCD chemical reference dataset are described. The CCD is updated regularly in conjunction with the scheduled weekly release of new PDB structure data. The CCD and amino acid variant reference datasets are hosted in the public PDB ftp repository at ftp://ftp.wwpdb.org/pub/pdb/data/monomers/components.cif.gz, ftp://ftp.wwpdb.org/pub/pdb/data/monomers/aa-variants-v1.cif.gz, and its mirror sites, and can be accessed from http://wwpdb.org. jwest@rcsb.rutgers.edu. Supplementary data are available at Bioinformatics online. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

77 FR 42698 - Gulf of Mexico Fishery Management Council; Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-20

... vermilion snapper annual catch limits in light of revised analysis and new acceptable biological catch...'s ftp site, ftp.gulfcouncil.org . Although other non-emergency issues not on the agenda may come...

40 CFR 600.007-08 - Vehicle acceptability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... section, or by testing in different inertia weight classes. Also, a single vehicle may be tested under... between the highway fuel economy, FTP, US06, SC03 and Cold temperature FTP tests. (ii) For vehicles...

Real-Time and High-Resolution 3D Face Measurement via a Smart Active Optical Sensor.

PubMed

You, Yong; Shen, Yang; Zhang, Guocai; Xing, Xiuwen

2017-03-31

The 3D measuring range and accuracy in traditional active optical sensing, such as Fourier transform profilometry, are influenced by the zero frequency of the captured patterns. The phase-shifting technique is commonly applied to remove the zero component. However, this phase-shifting method must capture several fringe patterns with phase difference, thereby influencing the real-time performance. This study introduces a smart active optical sensor, in which a composite pattern is utilized. The composite pattern efficiently combines several phase-shifting fringes and carrier frequencies. The method can remove zero frequency by using only one pattern. Model face reconstruction and human face measurement were employed to study the validity and feasibility of this method. Results show no distinct decrease in the precision of the novel method unlike the traditional phase-shifting method. The texture mapping technique was utilized to reconstruct a nature-appearance 3D digital face.

Real-Time and High-Resolution 3D Face Measurement via a Smart Active Optical Sensor

PubMed Central

You, Yong; Shen, Yang; Zhang, Guocai; Xing, Xiuwen

2017-01-01

The 3D measuring range and accuracy in traditional active optical sensing, such as Fourier transform profilometry, are influenced by the zero frequency of the captured patterns. The phase-shifting technique is commonly applied to remove the zero component. However, this phase-shifting method must capture several fringe patterns with phase difference, thereby influencing the real-time performance. This study introduces a smart active optical sensor, in which a composite pattern is utilized. The composite pattern efficiently combines several phase-shifting fringes and carrier frequencies. The method can remove zero frequency by using only one pattern. Model face reconstruction and human face measurement were employed to study the validity and feasibility of this method. Results show no distinct decrease in the precision of the novel method unlike the traditional phase-shifting method. The texture mapping technique was utilized to reconstruct a nature-appearance 3D digital face. PMID:28362349

Enhanced dual-frequency pattern scheme based on spatial-temporal fringes method

NASA Astrophysics Data System (ADS)

Wang, Minmin; Zhou, Canlin; Si, Shuchun; Lei, Zhenkun; Li, Xiaolei; Li, Hui; Li, YanJie

2018-07-01

One of the major challenges of employing a dual-frequency phase-shifting algorithm for phase retrieval is its sensitivity to noise. Yun et al proposed a dual-frequency method based on the Fourier transform profilometry, yet the low-frequency lobes are close to each other for accurate band-pass filtering. In the light of this problem, a novel dual-frequency pattern based on the spatial-temporal fringes (STF) method is developed in this paper. Three fringe patterns with two different frequencies are required. The low-frequency phase is obtained from two low-frequency fringe patterns by the STF method, so the signal lobes can be extracted accurately as they are far away from each other. The high-frequency phase is retrieved from another fringe pattern without the impact of the DC component. Simulations and experiments are conducted to demonstrate the excellent precision of the proposed method.

Magnetic core/shell nanoparticle thin films deposited by MAPLE: Investigation by chemical, morphological and in vitro biological assays

NASA Astrophysics Data System (ADS)

Cristescu, R.; Popescu, C.; Socol, G.; Iordache, I.; Mihailescu, I. N.; Mihaiescu, D. E.; Grumezescu, A. M.; Balan, A.; Stamatin, I.; Chifiriuc, C.; Bleotu, C.; Saviuc, C.; Popa, M.; Chrisey, D. B.

2012-09-01

We report on thin film deposition of nanostructured Fe3O4/oleic acid/ceftriaxone and Fe3O4/oleic acid/cefepime nanoparticles (core/shell/adsorption-shell) were fabricated by matrix assisted pulsed laser evaporation (MAPLE) onto inert substrates. The thin films were characterized by profilometry, Fourier transform infrared spectroscopy, atomic force microscopy, and investigated by in vitro biological assays. The biological properties tested included the investigation of the microbial viability and the microbial adherence to the glass coverslip nanoparticle film, using Gram-negative and Gram-positive bacterial strains with known antibiotic susceptibility behavior, the microbial adherence to the HeLa cells monolayer grown on the nanoparticle pellicle, and the cytotoxicity on eukaryotic cells. The proposed system, based on MAPLE, could be used for the development of novel anti-microbial materials or strategies for fighting pathogenic biofilms frequently implicated in the etiology of biofilm associated chronic infections.

Full-field chromatic confocal surface profilometry employing digital micromirror device correspondence for minimizing lateral cross talks

NASA Astrophysics Data System (ADS)

Chen, Liang-Chia; Chang, Yi-Wei; Li, Hau-Wei

2012-08-01

Full-field chromatic confocal surface profilometry employing a digital micromirror device (DMD) for spatial correspondence is proposed to minimize lateral cross-talks between individual detection sensors. Although full-field chromatic confocal profilometry is capable of enhancing measurement efficiency by completely removing time-consuming vertical scanning operation, its vertical measurement resolution and accuracy are still severely affected by the potential sensor lateral cross-talk problem. To overcome this critical bottleneck, a DMD-based chromatic confocal method is developed by employing a specially-designed objective for chromatic light dispersion, and a DMD for lateral pixel correspondence and scanning, thereby reducing the lateral cross-talk influence. Using the chromatic objective, the incident light is dispersed according to a pre-designed detection range of several hundred micrometers, and a full-field reflected light is captured by a three-chip color camera for multi color detection. Using this method, the full width half maximum of the depth response curve can be significantly sharpened, thus improving the vertical measurement resolution and repeatability of the depth detection. From our preliminary experimental evaluation, it is verified that the ±3σ repeatability of the height measurement can be kept within 2% of the overall measurement range.

Three-dimensional surface profile intensity correction for spatially modulated imaging

NASA Astrophysics Data System (ADS)

Gioux, Sylvain; Mazhar, Amaan; Cuccia, David J.; Durkin, Anthony J.; Tromberg, Bruce J.; Frangioni, John V.

2009-05-01

We describe a noncontact profile correction technique for quantitative, wide-field optical measurement of tissue absorption (μa) and reduced scattering (μs') coefficients, based on geometric correction of the sample's Lambertian (diffuse) reflectance intensity. Because the projection of structured light onto an object is the basis for both phase-shifting profilometry and modulated imaging, we were able to develop a single instrument capable of performing both techniques. In so doing, the surface of the three-dimensional object could be acquired and used to extract the object's optical properties. The optical properties of flat polydimethylsiloxane (silicone) phantoms with homogenous tissue-like optical properties were extracted, with and without profilometry correction, after vertical translation and tilting of the phantoms at various angles. Objects having a complex shape, including a hemispheric silicone phantom and human fingers, were acquired and similarly processed, with vascular constriction of a finger being readily detectable through changes in its optical properties. Using profilometry correction, the accuracy of extracted absorption and reduced scattering coefficients improved from two- to ten-fold for surfaces having height variations as much as 3 cm and tilt angles as high as 40 deg. These data lay the foundation for employing structured light for quantitative imaging during surgery.

Three-dimensional sensing methodology combining stereo vision and phase-measuring profilometry based on dynamic programming

NASA Astrophysics Data System (ADS)

Lee, Hyunki; Kim, Min Young; Moon, Jeon Il

2017-12-01

Phase measuring profilometry and moiré methodology have been widely applied to the three-dimensional shape measurement of target objects, because of their high measuring speed and accuracy. However, these methods suffer from inherent limitations called a correspondence problem, or 2π-ambiguity problem. Although a kind of sensing method to combine well-known stereo vision and phase measuring profilometry (PMP) technique simultaneously has been developed to overcome this problem, it still requires definite improvement for sensing speed and measurement accuracy. We propose a dynamic programming-based stereo PMP method to acquire more reliable depth information and in a relatively small time period. The proposed method efficiently fuses information from two stereo sensors in terms of phase and intensity simultaneously based on a newly defined cost function of dynamic programming. In addition, the important parameters are analyzed at the view point of the 2π-ambiguity problem and measurement accuracy. To analyze the influence of important hardware and software parameters related to the measurement performance and to verify its efficiency, accuracy, and sensing speed, a series of experimental tests were performed with various objects and sensor configurations.

Designing and Implementing a Family of Intrusion Detection Systems

DTIC Science & Technology

2004-11-01

configure (train), generates many false alarms – Misuse detection (signature analysis) (NFR, Emerald , Snort, STAT) • Generates few false alarms • Detects...to create .rhosts file in world-writable ftp home directory – rlogin using bogus .rhosts file S0 create_file read_rhosts S3S2 login S1 STAT KN-14...world-writable ftp home directory – rlogin using bogus .rhosts file S0 create_file read_rhosts S3S2 login S1 STAT KN-17 ftp-write in STATL use ustat

Mothers' different styles of involvement in preterm infant pain care.

PubMed

Axelin, Anna; Lehtonen, Liisa; Pelander, Tiina; Salanterä, Sanna

2010-01-01

To describe and understand how mothers utilize the opportunity to actively participate in their preterm infants' pain care using facilitated tucking by parents (FTP). Descriptive and exploratory study with postintervention interview. Finnish level III Neonatal Intensive Care Unit (NICU). Twenty-three mothers who had preterm infants born at gestational ages of 32 to 34 weeks. The parents (N=45) of 29 preterm infants were taught to use FTP. In addition, all nurses in the NICU (N=76) received the same education to support the parents' use of FTP. After 2 to 4 weeks of FTP use, the mothers (n=23) were interviewed using the Clinical Interview for Parents of High-Risk Infants with additional questions related to the infants' pain care. The interviews were analyzed inductively with cross-case analysis and deductively with a previously developed coding scheme. Facilitated tucking by parents was perceived positively and was used by all participating mothers. Three different styles of involvement in preterm infants' pain care with FTP were identified. They formed a continuum from external to random and finally to internalized involvement. In external involvement, the pain care with FTP was triggered by outside factors such as nurses, whereas in random and internalized involvement the motivation emerged from a parent. Mothers with external involvement thought that any person could apply the FTP. In random involvement, mothers were mainly absent during painful procedures, although they saw themselves as the best caregivers. In internalized involvement, the responsibility for infant pain care was shared within the family. Mothers' NICU-related stress and maternal attachment were associated with this variation. This study showed that mothers' are willing to actively participate in their preterm infants' pain care. However, the participation is unique according to mother and her experiences before and during NICU admission. Nurses need to consider these differences in mothers when involving them in preterm infants' pain care.

Oral glucose and parental holding preferable to opioid in pain management in preterm infants.

PubMed

Axelin, Anna; Salanterä, Sanna; Kirjavainen, Jarkko; Lehtonen, Liisa

2009-02-01

The purpose of this study was to compare the effectiveness of "facilitated tucking by parents" (FTP) in which a parent holds by her hands the infant in a side-lying flexed position offering support and skin contact, oral glucose, opioid (oxycodone), and placebo (oral water) in the context of heel stick and pharyngeal suctioning in very preterm infants. We hypothesized that nonpharmacologic methods equal the pharmacologic method and are superior to placebo in pain management. A prospective randomized placebo-controlled crossover trial. The study patients (n=20) were born at a mean gestational age of 28(+1) weeks and were studied at postconceptional age of 28 to 32 weeks. Pain measurements with Premature Infant Pain Profile and Neonatal Infant Pain Scale covered the first 30 seconds after the beginning of the painful stimulus. Premature Infant Pain Profile scores were significantly lower with oral glucose (mean: 4.85+/-1.73, P

Synthesis and preliminary evaluation of 18-(18)F-fluoro-4-thia-oleate as a PET probe of fatty acid oxidation.

PubMed

DeGrado, Timothy R; Bhattacharyya, Falguni; Pandey, Mukesh K; Belanger, Anthony P; Wang, Shuyan

2010-08-01

Fatty acid oxidation (FAO) is a major energy-providing process with important implications in cardiovascular, oncologic, neurologic, and metabolic diseases. A novel 4-thia oleate analog, 18-(18)F-fluoro-4-thia-oleate ((18)F-FTO), was evaluated in relationship to the previously developed palmitate analog 16-(18)F-fluoro-4-thia-palmitate ((18)F-FTP) as an FAO probe. (18)F-FTO was synthesized from a corresponding bromoester. Biodistribution and metabolite analysis studies were performed in rats. Preliminary small-animal PET studies were performed with (18)F-FTO and (18)F-FTP in rats. A practical synthesis of (18)F-FTO was developed, providing a radiotracer of high radiochemical purity (>99%). In fasted rats, myocardial uptake of (18)F-FTO (0.70 +/- 0.30% dose kg [body mass]/g [tissue mass]) was similar to that of (18)F-FTP at 30 min after injection. At 2 h, myocardial uptake of (18)F-FTO was maintained, whereas (18)F-FTP uptake in the heart was 82% reduced. Similar to (18)F-FTP, (18)F-FTO uptake by the heart was approximately 80% reduced at 30 min by pretreatment of rats with the CPT-I inhibitor etomoxir. Folch-type extraction analyses showed 70-90% protein-bound fractions in the heart, liver, and skeletal muscle, consistent with efficient trafficking of (18)F-FTO to the mitochondrion with subsequent metabolism to protein-bound species. Preliminary small-animal PET studies showed rapid blood clearance and avid extraction of (18)F-FTO and of (18)F-FTP into the heart and liver. Images of (18)F-FTO accumulation in the rat myocardium were clearly superior to those of (18)F-FTP. (18)F-FTO is shown to be a promising metabolically trapped FAO probe that warrants further evaluation.

Balancing low cost with reliable operation in the rotordynamic design of the ALS Liquid Hydrogen Fuel Turbopump

NASA Technical Reports Server (NTRS)

Greenhill, L. M.

1990-01-01

The Air Force/NASA Advanced Launch System (ALS) Liquid Hydrogen Fuel Turbopump (FTP) has primary design goals of low cost and high reliability, with performance and weight having less importance. This approach is atypical compared with other rocket engine turbopump design efforts, such as on the Space Shuttle Main Engine (SSME), which emphasized high performance and low weight. Similar to the SSME turbopumps, the ALS FTP operates supercritically, which implies that stability and bearing loads strongly influence the design. In addition, the use of low cost/high reliability features in the ALS FTP such as hydrostatic bearings, relaxed seal clearances, and unshrouded turbine blades also have a negative influence on rotordynamics. This paper discusses the analysis conducted to achieve a balance between low cost and acceptable rotordynamic behavior, to ensure that the ALS FTP will operate reliably without subsynchronous instabilities or excessive bearing loads.

40 CFR 600.306-08 - Labeling requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... which has a combined FTP/HFET-based fuel economy value, as determined in § 600.513-08, at or below the...) Have not been delivered to the ultimate purchaser, and (B) Have a combined FTP/HFET-based model type...

Relevant Telecomputing Activities.

ERIC Educational Resources Information Center

Ross, Patricia

1995-01-01

Discusses the use of telecomputing in classrooms. Topics include telecomputing goals; use of the Internet; language arts and music FTP (file transfer protocol) sites; social studies FTP sites; science Telnet sites; social studies Telnet sites; skill building and learning processes; and instructional design. (LRW)

Open sphincter-preserving surgery of extraperitoneal rectal cancer without primary stoma and Fast Track Protocol.

PubMed

Pappalardo, G; Coiro, S; De Lucia, F; Giannella, A; Ruffolo, F; Frattaroli, F M

2016-01-01

Fast track protocol (FTP) showed to improve perioperative care. The study aims to evaluate the impact of the FTP in the open extraperitoneal rectal cancer (ERC) surgical treatment without a primary derivative stoma (DS) and the QoL in patients with or without a secondary DS. 50 patients affected by ERC were enrolled and operated on with open low anterior resection without a primary DS. They were randomized in two groups: one was treated perioperativelly in the traditional way (group T), the other using a modif ed FTP (group FT). A QoL questionnaire was administered prior to discharge and at 1-month follow-up. Five courses (10%) were complicated by anastomotic leakage: 3 (12%) in the FT group (2 minor and 1 maior) and 2 (8%) in the T group (1 minor and 1 maior) (p=n.s.). All the maiors and one minor were treated with a DS. Patients of the group FTP were considered dischargeable earlier that those of group T (p<0.05). Patients with DS had a significantly lower QoL score (p<0.0001). FTP with minor modifications is feasible and safe in the ERC open surgery without using a DS. Better results were obtained without increasing complication rate. A secondary DS impacts detrimentally on QoL.

Evidence for Posttranslational Protein Flavinylation in the Syphilis Spirochete Treponema pallidum: Structural and Biochemical Insights from the Catalytic Core of a Periplasmic Flavin-Trafficking Protein.

PubMed

Deka, Ranjit K; Brautigam, Chad A; Liu, Wei Z; Tomchick, Diana R; Norgard, Michael V

2015-05-05

The syphilis spirochete Treponema pallidum is an important human pathogen but a highly enigmatic bacterium that cannot be cultivated in vitro. T. pallidum lacks many biosynthetic pathways and therefore has evolved the capability to exploit host-derived metabolites via its periplasmic lipoprotein repertoire. We recently reported a flavin-trafficking protein in T. pallidum (Ftp_Tp; TP0796) as the first bacterial metal-dependent flavin adenine dinucleotide (FAD) pyrophosphatase that hydrolyzes FAD into AMP and flavin mononucleotide (FMN) in the spirochete's periplasm. However, orthologs of Ftp_Tp from other bacteria appear to lack this hydrolytic activity; rather, they bind and flavinylate subunits of a cytoplasmic membrane redox system (Nqr/Rnf). To further explore this dichotomy, biochemical analyses, protein crystallography, and structure-based mutagenesis were used to show that a single amino acid change (N55Y) in Ftp_Tp converts it from an Mg(2+)-dependent FAD pyrophosphatase to an FAD-binding protein. We also demonstrated that Ftp_Tp has a second enzymatic activity (Mg(2+)-FMN transferase); it flavinylates protein(s) covalently with FMN on a threonine side chain of an appropriate sequence motif using FAD as the substrate. Moreover, mutation of a metal-binding residue (D284A) eliminates Ftp_Tp's dual activities, thereby underscoring the role of Mg(2+) in the enzyme-catalyzed reactions. The posttranslational flavinylation activity that can target a periplasmic lipoprotein (TP0171) has not previously been described. The observed activities reveal the catalytic flexibility of a treponemal protein to perform multiple functions. Together, these findings imply mechanisms by which a dynamic pool of flavin cofactor is maintained and how flavoproteins are generated by Ftp_Tp locally in the T. pallidum periplasm. Treponema pallidum, the syphilis spirochete, exploits its periplasmic lipoproteins for a number of essential physiologic processes. One of these, flavin-trafficking protein (Ftp), not only exploits its catalytic center to mediate posttranslational flavinylation of proteins (to create flavoproteins) but also likely maintains the periplasmic flavin pool via its unique ability to hydrolyze FAD. This functional diversity within a single lipoprotein is quite remarkable and reflects the enzymatic versatility of the treponemal lipoproteins, as well as molecular parsimony in an organism with a limited genome. Ftp-mediated protein flavinylation in the periplasm also likely is a key aspect of a predicted flavin-dependent Rnf-based redox homeostasis system at the cytoplasmic membrane of T. pallidum. In addition to its importance in T. pallidum physiology, Ftp homologs exist in other bacteria, thereby expanding our understanding of the bacterial periplasm as a metabolically active subcellular compartment for flavoprotein biogenesis as well as flavin homeostasis. Copyright © 2015 Deka et al.

18F-Flortaucipir Binding in Choroid Plexus: Related to Race and Hippocampus Signal.

PubMed

Lee, Christopher M; Jacobs, Heidi I L; Marquié, Marta; Becker, John A; Andrea, Nicolas V; Jin, David S; Schultz, Aaron P; Frosch, Matthew P; Gómez-Isla, Teresa; Sperling, Reisa A; Johnson, Keith A

2018-01-01

On target 18F-Flortaucipir (FTP) binding of Alzheimer's disease tau aggregates and off-target binding of melanocytes have been demonstrated with autoradiography. We aimed to investigate the hypothesis that if binding in choroid plexus (CP) is due to melanocytes, the signal would be elevated in Black/African American (B/AA) compared to White (W) participants. In addition, we examined whether CP signal affects measurements in adjacent regions, and whether correcting for spill-in effects has an influence on associations between hippocampus (HC) FTP and amyloid or cognition. FTP race differences in 147 Harvard Aging Brain Study participants (23 B/AA, 124W) were examined in CP, HC, HC covaried for CP, amygdala, inferior temporal gyrus, entorhinal cortex, and fusiform regions. Associations between CP FTP and other regions-of-interest (ROIs) were probed to assess spill-in effects. A statistical regression approach to attenuate CP spill-in was tested by relating adjusted HC SUVR residuals and unadjusted HC SUVR to race, cognition and amyloid. All analyses were covaried for age, sex, education and amyloid deposition, and Bonferroni-corrected for multiple comparisons. B/AA individuals had elevated CP and HC SUVR (p < 0.007), whereas other ROI SUVR and HC SUVR covaried for CP SUVR did not show race differences (p > 0.05). CP SUVR was associated with HC SUVR (p < 10-14), but with no other ROI SUVR (p > 0.05). When adjusting HC SUVR for CP SUVR, no race differences in residual HC SUVR were detected, and relationships with amyloid and memory became apparent. Melanocyte FTP binding may account partially for high CP signal. This off-target binding affects mainly HC FTP measurements, which should be interpreted with caution.

18F-Flortaucipir Binding in Choroid Plexus: Related to Race and Hippocampus Signal

PubMed Central

Lee, Christopher M.; Jacobs, Heidi I.L.; Marquié, Marta; Becker, John A.; Andrea, Nicolas V.; Jin, David S.; Schultz, Aaron P.; Frosch, Matthew P.; Gómez-Isla, Teresa; Sperling, Reisa A.; Johnson, Keith A.

2018-01-01

Background On target 18F-Flortaucipir (FTP) binding of Alzheimer’s disease tau aggregates and off-target binding of melanocytes have been demonstrated with autoradiography. Objective We aimed to investigate the hypothesis that if binding in choroid plexus (CP) is due to melanocytes, the signal would be elevated in Black/African American (B/AA) compared to White (W) participants. In addition, we examined whether CP signal affects measurements in adjacent regions, and whether correcting for spill-in effects has an influence on associations between hippocampus (HC) FTP and amyloid or cognition. Methods FTP race differences in 147 Harvard Aging Brain Study participants (23 B/AA, 124W) were examined in CP, HC, HC covaried for CP, amygdala, inferior temporal gyrus, entorhinal cortex, and fusiform regions. Associations between CP FTP and other regions-of-interest (ROIs) were probed to assess spill-in effects. A statistical regression approach to attenuate CP spill-in was tested by relating adjusted HC SUVR residuals and unadjusted HC SUVR to race, cognition and amyloid. All analyses were covaried for age, sex, education and amyloid deposition, and Bonferroni-corrected for multiple comparisons. Results B/AA individuals had elevated CP and HC SUVR (p < 0.007), whereas other ROI SUVR and HC SUVR covaried for CP SUVR did not show race differences (p > 0.05). CP SUVR was associated with HC SUVR (p < 10−14), but with no other ROI SUVR (p > 0.05). When adjusting HC SUVR for CP SUVR, no race differences in residual HC SUVR were detected, and relationships with amyloid and memory became apparent. Conclusion Melanocyte FTP binding may account partially for high CP signal. This off-target binding affects mainly HC FTP measurements, which should be interpreted with caution. PMID:29614677

Evidence for Posttranslational Protein Flavinylation in the Syphilis Spirochete Treponema pallidum: Structural and Biochemical Insights from the Catalytic Core of a Periplasmic Flavin-Trafficking Protein

PubMed Central

Deka, Ranjit K.; Brautigam, Chad A.; Liu, Wei Z.

2015-01-01

ABSTRACT The syphilis spirochete Treponema pallidum is an important human pathogen but a highly enigmatic bacterium that cannot be cultivated in vitro. T. pallidum lacks many biosynthetic pathways and therefore has evolved the capability to exploit host-derived metabolites via its periplasmic lipoprotein repertoire. We recently reported a flavin-trafficking protein in T. pallidum (Ftp_Tp; TP0796) as the first bacterial metal-dependent flavin adenine dinucleotide (FAD) pyrophosphatase that hydrolyzes FAD into AMP and flavin mononucleotide (FMN) in the spirochete’s periplasm. However, orthologs of Ftp_Tp from other bacteria appear to lack this hydrolytic activity; rather, they bind and flavinylate subunits of a cytoplasmic membrane redox system (Nqr/Rnf). To further explore this dichotomy, biochemical analyses, protein crystallography, and structure-based mutagenesis were used to show that a single amino acid change (N55Y) in Ftp_Tp converts it from an Mg2+-dependent FAD pyrophosphatase to an FAD-binding protein. We also demonstrated that Ftp_Tp has a second enzymatic activity (Mg2+-FMN transferase); it flavinylates protein(s) covalently with FMN on a threonine side chain of an appropriate sequence motif using FAD as the substrate. Moreover, mutation of a metal-binding residue (D284A) eliminates Ftp_Tp’s dual activities, thereby underscoring the role of Mg2+ in the enzyme-catalyzed reactions. The posttranslational flavinylation activity that can target a periplasmic lipoprotein (TP0171) has not previously been described. The observed activities reveal the catalytic flexibility of a treponemal protein to perform multiple functions. Together, these findings imply mechanisms by which a dynamic pool of flavin cofactor is maintained and how flavoproteins are generated by Ftp_Tp locally in the T. pallidum periplasm. PMID:25944861

Endoluminal full-thickness plication and radiofrequency treatments for GERD: an outcomes comparison.

PubMed

Jeansonne, Louis O; White, Brent C; Nguyen, Vien; Jafri, Syed M; Swafford, Vickie; Katchooi, Mina; Khaitan, Leena; Davis, S Scott; Smith, C Daniel; Sedghi, Shahriar; Lin, Edward

2009-01-01

Endoluminal therapies have emerged as adjuncts for the treatment of gastroesophageal reflux disease (GERD) in select patients. To compare the effectiveness of endoscopic full-thickness plication and endoscopic radiofrequency treatments for patients with GERD. A total of 126 patients who underwent either endoscopic full-thickness plication (FTP) of the gastric cardia or endoscopic radiofrequency (RF) treatment of the esophagogastric junction during a 4-year period were included (68 underwent RF and 58 underwent FTP). Follow-up data was obtained for 51% of patients (mean follow-up, 6 months). Comparison of medication use, symptom scores, and pH values at baseline and follow-up. In the RF group, patients with moderate to severe heartburn decreased from 55% to 22% (P < .01), and proton pump inhibitor (PPI) use decreased from 84% to 50% (P = .01). Decreases were also seen for dysphagia, voice symptoms, and cough. Percentage of time the pH was less than 4 was unchanged. In the FTP group, patients with moderate to severe heartburn decreased from 53% to 43% (P = .3), and PPI use decreased from 95% to 43% (P = .01). Percentage of time the pH was less than 4 decreased from 10.0% to 6.1% (P = .05). Decreases were also seen for regurgitation, voice symptoms, and dysphagia. There was no change in scores for chest pain or asthma in either group. For patients with GERD, RF and FTP both resulted in a decrease in both PPI use and in scores for voice symptoms and dysphagia. In addition, RF resulted in decreased heartburn and cough, while FTP resulted in the most dramatic reduction in regurgitation. Our experience indicates that both procedures are effective, providing symptomatic relief and reduction in PPI use. For patients whose chief complaint is regurgitation, FTP may be the preferred procedure.

FTP: Full-Text Publishing?

ERIC Educational Resources Information Center

Jul, Erik

1992-01-01

Describes the use of file transfer protocol (FTP) on the INTERNET computer network and considers its use as an electronic publishing system. The differing electronic formats of text files are discussed; the preparation and access of documents are described; and problems are addressed, including a lack of consistency. (LRW)

High-Bandwidth Dynamic Full-Field Profilometry for Nano-Scale Characterization of MEMS

NASA Astrophysics Data System (ADS)

Chen, Liang-Chia; Huang, Yao-Ting; Chang, Pi-Bai

2006-10-01

The article describes an innovative optical interferometric methodology to delivery dynamic surface profilometry with a measurement bandwidth up to 10MHz or higher and a vertical resolution up to 1 nm. Previous work using stroboscopic microscopic interferometry for dynamic characterization of micro (opto)electromechanical systems (M(O)EMS) has been limited in measurement bandwidth mainly within a couple of MHz. For high resonant mode analysis, the stroboscopic light pulse is insufficiently short to capture the moving fringes from dynamic motion of the detected structure. In view of this need, a microscopic prototype based on white-light stroboscopic interferometry with an innovative light superposition strategy was developed to achieve dynamic full-field profilometry with a high measurement bandwidth up to 10MHz or higher. The system primarily consists of an optical microscope, on which a Mirau interferometric objective embedded with a piezoelectric vertical translator, a high-power LED light module with dual operation modes and light synchronizing electronics unit are integrated. A micro cantilever beam used in AFM was measured to verify the system capability in accurate characterisation of dynamic behaviours of the device. The full-field seventh-mode vibration at a vibratory frequency of 3.7MHz can be fully characterized and nano-scale vertical measurement resolution as well as tens micrometers of vertical measurement range can be performed.

InterProScan 5: genome-scale protein function classification

PubMed Central

Jones, Philip; Binns, David; Chang, Hsin-Yu; Fraser, Matthew; Li, Weizhong; McAnulla, Craig; McWilliam, Hamish; Maslen, John; Mitchell, Alex; Nuka, Gift; Pesseat, Sebastien; Quinn, Antony F.; Sangrador-Vegas, Amaia; Scheremetjew, Maxim; Yong, Siew-Yit; Lopez, Rodrigo; Hunter, Sarah

2014-01-01

Motivation: Robust large-scale sequence analysis is a major challenge in modern genomic science, where biologists are frequently trying to characterize many millions of sequences. Here, we describe a new Java-based architecture for the widely used protein function prediction software package InterProScan. Developments include improvements and additions to the outputs of the software and the complete reimplementation of the software framework, resulting in a flexible and stable system that is able to use both multiprocessor machines and/or conventional clusters to achieve scalable distributed data analysis. InterProScan is freely available for download from the EMBl-EBI FTP site and the open source code is hosted at Google Code. Availability and implementation: InterProScan is distributed via FTP at ftp://ftp.ebi.ac.uk/pub/software/unix/iprscan/5/ and the source code is available from http://code.google.com/p/interproscan/. Contact: http://www.ebi.ac.uk/support or interhelp@ebi.ac.uk or mitchell@ebi.ac.uk PMID:24451626

Techno-functional properties of tomato puree fortified with anthocyanin pigments.

PubMed

Gerardi, C; Albano, C; Calabriso, N; Carluccio, M A; Durante, M; Mita, G; Renna, M; Serio, F; Blando, F

2018-02-01

This study investigates the effects of tomato puree fortification with several anthocyanin-rich food colorants on bioactive compound content (phenolics, isoprenoids), antioxidant capacity, in vitro biological activities and consumer acceptance. Tomato puree (tp) was added with different anthocyanin extracts from black carrot (Anthocarrot), grape fruit skins (Enocolor), elderberry fruits (Elderberry) or mahaleb cherry fruits (Mahaleb), thus obtaining a 'functional tomato puree' (ftp). The consumer acceptance (colour, flavor, taste, visual appearance) was at high level, except for Mahaleb-added ftp. Compared to the control (tp), the addition of colouring extracts increased significantly the total phenolic content, before pasteurization, in addition to the expected anthocyanin content. However, after pasteurization, mostly Anthocarrot-ftp preserved an increased phenolic (+53%) content, as well as a higher antioxidant capacity (50%), more than the other added-extracts. Consistently, against tp, Anthocarrot-ftp exhibited an increased anti-inflammatory capacity as showed by the reduced expression of vascular cell adhesion molecule (VCAM)-1 in human cultured endothelial cells, under inflammatory conditions. Copyright © 2017 Elsevier Ltd. All rights reserved.

Oropharyngeal examination to predict sleep apnea severity.

PubMed

Barceló, Xavier; Mirapeix, Rosa M; Bugés, Jordi; Cobos, Albert; Domingo, Christian

2011-10-01

To evaluate the usefulness of the examination of the upper airway, paying special attention to the Friedman tongue position (FTP), to confirm obstructive sleep apnea syndrome (OSAS) and its severity. Prospective, single-center, cross-sectional study. Sleep disorders unit of a community hospital. A total of 301 consecutive patients admitted to the sleep disorders unit due to suspicion of OSAS. Assessments included body mass index calculated as weight in kilograms divided by height in meters squared (BMI); neck perimeter measurement; oropharyngeal examination; fiberendoscopy; rhinomanometry; and a sleep study. Apnea-hypopnoea index (AHI), FTP, the uvula size, and certain complementary examinations (sex, age, BMI, cervical perimeter, nasal flow) whose importance has not been clearly established, and to explore their potential value as predictors of the AHI. Findings included the following: the mean (SD) age of the patients was 51 (12) years; 71.1% were male; the mean (SD) BMI was 29.8 (4.6); and the mean (SD) cervical perimeter, 40.5 (3.7) cm. In 94.0% of the patients the AHI value was at least 5.0/hour. Patients with FTP scores of 2 and 3 accounted for 74.1% of the whole cohort: 14.3% had an FTP score of 1, and only 11.6% had a score of 4. Of the 6.0% of cases with a normal AHI, 16 patients were classified as having FTP scores of 1, and 2 as having a score of 2. Tonsil size score (P = .005), uvula score (P = .003), BMI (P < .001), cervical perimeter (P < .001), nasal flow at 150 Pa (P = .02), and age (P = .007) were related to OSAS severity. Curiously, AHI in patients who had undergone tonsillectomy was higher than in the TS1 group (tonsils inside the tonsillar fossa) and quite similar to the TS 2 group (tonsils that extend beyond the tonsillar pillars). In the multiple regression model, only the FTP score showed a relevant relationship to OSAS severity. First, since the FTP score is almost the only parameter related to OSAS severity, a simple oropharyngeal examination can provide key information on this issue. Second, tonsillectomy does not seem to protect against development of OSAS.

The effectiveness of fermented turmeric powder in subjects with elevated alanine transaminase levels: a randomised controlled study.

PubMed

Kim, Sang-Wook; Ha, Ki-Chan; Choi, Eun-Kyung; Jung, Su-Young; Kim, Min-Gul; Kwon, Dae-Young; Yang, Hye-Jung; Kim, Min-Jung; Kang, Hee-Joo; Back, Hyang-Im; Kim, Sun-Young; Park, Soo-Hyun; Baek, Hum-Young; Kim, Yong-Jae; Lee, Joon-Yeol; Chae, Soo-Wan

2013-03-08

Previous animal studies have shown that Curcuma longa (turmeric) improves liver function. Turmeric may thus be a promising ingredient in functional foods aimed at improving liver function. The purpose of the study is to investigate the hepatoprotective effect of fermented turmeric powder (FTP) on liver function in subjects with elevated alanine transaminase (ALT) levels. A randomised, double-blind, placebo-controlled trial was conducted between November 2010 and April 2012 at the clinical trial center for functional foods of the Chonbuk National University Hospital. The trial included 60 subjects, 20 years old and above, who were diagnosed mild to moderate elevated ALT levels between 40 IU/L and 200 IU/L. Sixty subjects were randomised to receive FTP 3.0 g per day or placebo 3.0 g per day for 12 weeks. The treatment group received two capsules of FTP three times a day after meals, for 12 weeks. The primary efficacy endpoint was change in the ALT levels in the two groups. The secondary efficacy endpoints included its effect on aspartate aminotransferase (AST), gamma-glutamyl transferase (GGT), total bilirubin (TB), and lipid profiles. Safety was assessed throughout the study using ongoing laboratory tests. Adverse events (AEs) were also recorded. Sixty subjects were randomised in the study (30 into the FTP group, 30 into the placebo group), and among them, twelve subjects were excluded from the analysis for protocol violation, adverse events or consent withdrawal. The two groups did not differ in baseline characteristics. After 12 weeks of treatment, 48 subjects were evaluated. Of the 48 subjects, 26 randomly received FTP capsules and 22 received placebo. The FTP group showed a significant reduction in ALT levels after 12 weeks of treatment compared with the placebo group (p = 0.019). There was also observed that the serum AST levels were significantly reduce in the FTP group than placebo group (p = 0.02). The GGT levels showed a tendency to decrease, while the serum alkaline phosphatase (ALP), TB, and lipids levels were not modified. There were no reported severe AEs during this study, or abnormalities observed on blood glucose, total protein, albumin, blood urea nitrogen (BUN), and creatinine levels. The data of this trial indicate that FTP is effective and safe, generally well-tolerated without severe AEs, in the treatment of subjects with elevated ALT levels over a 12 weeks period. ClinicalTrials.gov: NCT01634256

Connections Between Future Time Perspectives and Self-Regulated Learning for Mid-Year Engineering Students: A Multiple Case Study

NASA Astrophysics Data System (ADS)

Chasmar, Justine

This dissertation presents multiple studies with the purpose of understanding the connections between undergraduate engineering students' motivations, specifically students' Future Time Perspectives (FTPs) and Self-Regulated Learning (SRL). FTP refers to the views students hold about the future and how their perceptions of current tasks are affected by these views. SRL connects the behaviors, metacognition, and motivation of students in their learning. The goals of this research project were to 1) qualitatively describe and document engineering students' SRL strategies, 2) examine interactions between engineering students' FTPs and SRL strategy use, and 3) explore goal-setting as a bridge between FTP and SRL. In an exploratory qualitative study with mid-year industrial engineering students to examine the SRL strategies used before and after an SRL intervention, results showed that students intended to use more SRL strategies than they attempted. However, students self-reported using new SRL strategies from the intervention. Students in this population also completed a survey and a single interview about FTP and SRL. Results showed perceptions of instrumentality of coursework and skills as motivation for using SRL strategies, and a varied use of SRL strategies for students with different FTPs. Overall, three types of student FTP were seen: students with a single realistic view of the future, conflicting ideal and realistic future views, or open views of the future. A sequential explanatory mixed methods study was conducted with mid-year students from multiple engineering majors. First a cluster analysis of survey results of FTP items compared to FTP interview responses was used for participant selection. Then a multiple case study was conducted with data collected through surveys, journal entries, course performance, and two interviews. Results showed that students with a well-defined FTP self-regulated in the present based on their varied perceptions of instrumentality for their present tasks and evaluated and adapted their SRL strategies based on grades. Students with conflicting perceptions of the future used a high level of SRL in courses related to both conflicting future paths or related to their short-term goals. Students with open views had high SRL in most of their courses due to a high perception of instrumentality for their present courses. Implications for practice include use of a context-based SRL intervention to teach effective learning strategies, a shift of key general education courses to earlier in the engineering curriculum, and utilization of career-focused problems to support student FTP development and stress the importance of course content in future engineering careers.

The effectiveness of fermented turmeric powder in subjects with elevated alanine transaminase levels: a randomised controlled study

PubMed Central

2013-01-01

Background Previous animal studies have shown that Curcuma longa (turmeric) improves liver function. Turmeric may thus be a promising ingredient in functional foods aimed at improving liver function. The purpose of the study is to investigate the hepatoprotective effect of fermented turmeric powder (FTP) on liver function in subjects with elevated alanine transaminase (ALT) levels. Methods A randomised, double-blind, placebo-controlled trial was conducted between November 2010 and April 2012 at the clinical trial center for functional foods of the Chonbuk National University Hospital. The trial included 60 subjects, 20 years old and above, who were diagnosed mild to moderate elevated ALT levels between 40 IU/L and 200 IU/L. Sixty subjects were randomised to receive FTP 3.0 g per day or placebo 3.0 g per day for 12 weeks. The treatment group received two capsules of FTP three times a day after meals, for 12 weeks. The primary efficacy endpoint was change in the ALT levels in the two groups. The secondary efficacy endpoints included its effect on aspartate aminotransferase (AST), gamma-glutamyl transferase (GGT), total bilirubin (TB), and lipid profiles. Safety was assessed throughout the study using ongoing laboratory tests. Adverse events (AEs) were also recorded. Results Sixty subjects were randomised in the study (30 into the FTP group, 30 into the placebo group), and among them, twelve subjects were excluded from the analysis for protocol violation, adverse events or consent withdrawal. The two groups did not differ in baseline characteristics. After 12 weeks of treatment, 48 subjects were evaluated. Of the 48 subjects, 26 randomly received FTP capsules and 22 received placebo. The FTP group showed a significant reduction in ALT levels after 12 weeks of treatment compared with the placebo group (p = 0.019). There was also observed that the serum AST levels were significantly reduce in the FTP group than placebo group (p = 0.02). The GGT levels showed a tendency to decrease, while the serum alkaline phosphatase (ALP), TB, and lipids levels were not modified. There were no reported severe AEs during this study, or abnormalities observed on blood glucose, total protein, albumin, blood urea nitrogen (BUN), and creatinine levels. Conclusion The data of this trial indicate that FTP is effective and safe, generally well-tolerated without severe AEs, in the treatment of subjects with elevated ALT levels over a 12 weeks period. Trial registration ClinicalTrials.gov: http://NCT01634256 PMID:23497020

Fringe pattern demodulation using the one-dimensional continuous wavelet transform: field-programmable gate array implementation.

PubMed

Abid, Abdulbasit

2013-03-01

This paper presents a thorough discussion of the proposed field-programmable gate array (FPGA) implementation for fringe pattern demodulation using the one-dimensional continuous wavelet transform (1D-CWT) algorithm. This algorithm is also known as wavelet transform profilometry. Initially, the 1D-CWT is programmed using the C programming language and compiled into VHDL using the ImpulseC tool. This VHDL code is implemented on the Altera Cyclone IV GX EP4CGX150DF31C7 FPGA. A fringe pattern image with a size of 512×512 pixels is presented to the FPGA, which processes the image using the 1D-CWT algorithm. The FPGA requires approximately 100 ms to process the image and produce a wrapped phase map. For performance comparison purposes, the 1D-CWT algorithm is programmed using the C language. The C code is then compiled using the Intel compiler version 13.0. The compiled code is run on a Dell Precision state-of-the-art workstation. The time required to process the fringe pattern image is approximately 1 s. In order to further reduce the execution time, the 1D-CWT is reprogramed using Intel Integrated Primitive Performance (IPP) Library Version 7.1. The execution time was reduced to approximately 650 ms. This confirms that at least sixfold speedup was gained using FPGA implementation over a state-of-the-art workstation that executes heavily optimized implementation of the 1D-CWT algorithm.

40 CFR 600.107-08 - Fuel specifications.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Exhaust Emission Test Procedures § 600.107-08 Fuel specifications. (a) The test fuel specifications for... given in paragraph (b) of this section. (b)(1) Diesel test fuel used for cold temperature FTP testing... alternative fuel for cold temperature FTP testing. (c) Test fuels representing fuel types for which there are...

40 CFR 600.107-08 - Fuel specifications.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Exhaust Emission Test Procedures § 600.107-08 Fuel specifications. (a) The test fuel specifications for... given in paragraph (b) of this section. (b)(1) Diesel test fuel used for cold temperature FTP testing... alternative fuel for cold temperature FTP testing. (c) Test fuels representing fuel types for which there are...

40 CFR 600.107-08 - Fuel specifications.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Exhaust Emission Test Procedures § 600.107-08 Fuel specifications. (a) The test fuel specifications for... given in paragraph (b) of this section. (b)(1) Diesel test fuel used for cold temperature FTP testing... alternative fuel for cold temperature FTP testing. (c) Test fuels representing fuel types for which there are...

40 CFR 600.111-08 - Test procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Test procedures. 600.111-08 Section... Emission Test Procedures § 600.111-08 Test procedures. This section describes test procedures for the FTP, highway fuel economy test (HFET), US06, SC03, and the cold temperature FTP tests. Perform testing...

40 CFR 600.111-08 - Test procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Test procedures. 600.111-08 Section... Model Year Automobiles-Test Procedures § 600.111-08 Test procedures. This section provides test procedures for the FTP, highway, US06, SC03, and the cold temperature FTP tests. Testing shall be performed...

All Aboard the Internet.

ERIC Educational Resources Information Center

Descy, Don E.

1993-01-01

This introduction to the Internet with examples for Macintosh computer users demonstrates the ease of using e-mail, participating on discussion group listservs, logging in to remote sites using Telnet, and obtaining resources using the File Transfer Protocol (FTP). Included are lists of discussion groups, Telnet sites, and FTP Archive sites. (EA)

Optical frequency comb profilometry using a single-pixel camera composed of digital micromirror devices.

PubMed

Pham, Quang Duc; Hayasaki, Yoshio

2015-01-01

We demonstrate an optical frequency comb profilometer with a single-pixel camera to measure the position and profile of an object's surface that exceeds far beyond light wavelength without 2π phase ambiguity. The present configuration of the single-pixel camera can perform the profilometry with an axial resolution of 3.4 μm at 1 GHz operation corresponding to a wavelength of 30 cm. Therefore, the axial dynamic range was increased to 0.87×10⁵. It was found from the experiments and computer simulations that the improvement was derived from higher modulation contrast of digital micromirror devices. The frame rate was also increased to 20 Hz.

FPGA-based real-time phase measuring profilometry algorithm design and implementation

NASA Astrophysics Data System (ADS)

Zhan, Guomin; Tang, Hongwei; Zhong, Kai; Li, Zhongwei; Shi, Yusheng

2016-11-01

Phase measuring profilometry (PMP) has been widely used in many fields, like Computer Aided Verification (CAV), Flexible Manufacturing System (FMS) et al. High frame-rate (HFR) real-time vision-based feedback control will be a common demands in near future. However, the instruction time delay in the computer caused by numerous repetitive operations greatly limit the efficiency of data processing. FPGA has the advantages of pipeline architecture and parallel execution, and it fit for handling PMP algorithm. In this paper, we design a fully pipelined hardware architecture for PMP. The functions of hardware architecture includes rectification, phase calculation, phase shifting, and stereo matching. The experiment verified the performance of this method, and the factors that may influence the computation accuracy was analyzed.

Development and Verification of a Novel Robot-Integrated Fringe Projection 3D Scanning System for Large-Scale Metrology.

PubMed

Du, Hui; Chen, Xiaobo; Xi, Juntong; Yu, Chengyi; Zhao, Bao

2017-12-12

Large-scale surfaces are prevalent in advanced manufacturing industries, and 3D profilometry of these surfaces plays a pivotal role for quality control. This paper proposes a novel and flexible large-scale 3D scanning system assembled by combining a robot, a binocular structured light scanner and a laser tracker. The measurement principle and system construction of the integrated system are introduced. A mathematical model is established for the global data fusion. Subsequently, a robust method is introduced for the establishment of the end coordinate system. As for hand-eye calibration, the calibration ball is observed by the scanner and the laser tracker simultaneously. With this data, the hand-eye relationship is solved, and then an algorithm is built to get the transformation matrix between the end coordinate system and the world coordinate system. A validation experiment is designed to verify the proposed algorithms. Firstly, a hand-eye calibration experiment is implemented and the computation of the transformation matrix is done. Then a car body rear is measured 22 times in order to verify the global data fusion algorithm. The 3D shape of the rear is reconstructed successfully. To evaluate the precision of the proposed method, a metric tool is built and the results are presented.

Effects of Age and Acute Moderate Alcohol Administration on Electrophysiological Correlates of Working Memory Maintenance.

PubMed

Boissoneault, Jeff; Frazier, Ian; Lewis, Ben; Nixon, Sara Jo

2016-09-01

Previous studies suggest older adults may be differentially susceptible to the acute neurobehavioral effects of moderate alcohol intake. To our knowledge, no studies have addressed acute moderate alcohol effects on the electrophysiological correlates of working memory in younger and older social drinkers. This study characterized alcohol-related effects on frontal theta (FTP) and posterior alpha power (PAP) associated with maintenance of visual information during a working memory task. Older (55 to 70 years of age; n = 51, 29 women) and younger (25 to 35 years of age; n = 70, 39 women) community-dwelling moderate drinkers were recruited for this study. Participants were given either placebo or an active dose targeting breath alcohol concentrations (BrACs) of 0.04 or 0.065 g/dl. Following absorption, participants completed a visual working memory task assessing cue recognition following a 9-s delay. FTP and PAP were determined via Fourier transformation and subjected to 2 (age group) × 3 (dose) × 2 (repeated: working memory task condition) mixed models analysis. In addition to expected age-related reductions in PAP, a significant age group × dose interaction was detected for PAP such that 0.04 g/dl dose level was associated with greater PAP in younger adults but lower PAP in their older counterparts. PAP was lower in older versus younger adults at both active doses. Further mixed models revealed a significant negative association between PAP and working memory efficiency for older adults. No effects of age, dose, or their interaction were noted for FTP. Results bolster the small but growing body of evidence that older adults exhibit differential sensitivity to the neurobehavioral effects of moderate alcohol use. Given the theoretical role of PAP in attentional and working memory function, these findings shed light on the attentional mechanisms underlying effects of acute moderate alcohol on working memory efficiency in older adults. Copyright © 2016 by the Research Society on Alcoholism.

20060530 - Global Ensemble Upgrade - NWS ftp

Science.gov Websites

the NWS ftp server and to describe some changes to data locations described in the earlier message on .{YYYYMMDD}/ MAJOR PRODUCT CHANGES TO NCEP GLOBAL ENSEMBLE OUTPUT -- PLEASE READ CAREFULLY Starting with the 12 UTC cycle on 30 May 2006 NCEP Central Operations will implement changes to the global ensemble

40 CFR 600.111-08 - Test procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Test procedures. 600.111-08 Section... Emission Test Procedures § 600.111-08 Test procedures. This section provides test procedures for the FTP, highway, US06, SC03, and the cold temperature FTP tests. Testing shall be performed according to test...

40 CFR 600.111-08 - Test procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 30 2011-07-01 2011-07-01 false Test procedures. 600.111-08 Section... Emission Regulations for 1978 and Later Model Year Automobiles-Test Procedures § 600.111-08 Test procedures. This section provides test procedures for the FTP, highway, US06, SC03, and the cold temperature FTP...

Field-based video pre-test counseling, oral testing, and telephonic post-test counseling: implementation of an HIV field testing package among high-risk Indian men.

PubMed

Snyder, Hannah; Yeldandi, Vijay V; Prem Kumar, G; Liao, Chuanhong; Lakshmi, Vemu; Gandham, Sabitha R; Muppudi, Uma; Oruganti, Ganesh; Schneider, John A

2012-08-01

In India, men who have sex with men (MSM) and truck drivers are high-risk groups that often do not access HIV testing due to stigma and high mobility. This study evaluated a field testing package (FTP) that identified HIV positive participants through video pre-test counseling, OraQuick oral fluid HIV testing, and telephonic post-test counseling and then connected them to government facilities. A total of 598 MSM and truck drivers participated in the FTP and completed surveys covering sociodemographics, HIV testing history, risk behaviors, and opinions on the FTP. MSM and truck drivers equally preferred video counseling, although MSM who had been previously tested preferred traditional methods. Nearly all participants preferred oral testing. Rates of counseling completion and linkage to government centers were low, with one-third of newly identified positives completing follow-up. With increased public-private coordination, this FTP could identify many hard-to-reach preliminary positive individuals and connect them to government testing and care.

Field-based video pre-test counseling, oral testing and telephonic post-test counseling: Implementation of an HIV field testing package among high-risk Indian men

PubMed Central

Snyder, Hannah; Yeldandi, Vijay V.; Kumar, G. Prem; Liao, Chuanhong; Lakshmi, Vemu; Gandham, Sabitha R.; Muppudi, Uma; Oruganti, Ganesh; Schneider, John A.

2013-01-01

In India, men who have sex with men (MSM) and truck drivers are high-risk groups that often do not access HIV testing due to stigma and high mobility. This study evaluated a field testing package (FTP) that identified HIV positive participants through video pre-test counseling, OraQuick oral fluid HIV testing, and telephonic post-test counseling and then connected them to government facilities. 598 MSM and truck drivers participated in the FTP and completed surveys covering sociodemographics, HIV testing history, risk behaviors, and opinions on the FTP. Those who had previously been tested preferred traditional methods to video counseling. MSM and truck drivers equally preferred video counseling, although MSM who had been previously tested preferred traditional methods. Nearly all participants preferred oral testing. Rates of counseling completion and linkage to government centers were low, with one third of newly identified positives completing follow-up. With increased public-private coordination, this FTP could identify many hard-to-reach preliminary positive individuals and connect them to government testing and care. PMID:22827901

Lateral bias and temperament in the domestic cat (Felis silvestris).

PubMed

McDowell, Louise J; Wells, Deborah L; Hepper, Peter G; Dempster, Martin

2016-11-01

Research points to a relationship between lateralization and emotional functioning in humans and many species of animal. The present study explored the association between paw preferences and emotional functioning, specifically temperament, in a species thus far overlooked in this area, the domestic cat. Thirty left-pawed, 30 right-pawed, and 30 ambilateral pet cats were recruited following an assessment of their paw preferences using a food-reaching challenge. The animals' temperament was subsequently assessed using the Feline Temperament Profile (FTP). Cats' owners also completed a purpose-designed cat temperament (CAT) scale. Analysis revealed a significant relationship between lateral bias and FTP and CAT scale scores. Ambilateral cats had lower positive (FTP+) scores, and were perceived as less affectionate, obedient, friendly, and more aggressive, than left or right-pawed animals. Left and right pawed cats differed significantly on 1 trait on the CAT scale, namely playfulness. The strength of the cats' paw preferences was related to the animals' FTP and CAT scores. Cats with a greater strength of paw preference had higher FTP+ scores than those with a weaker strength of paw preference. Animals with stronger paw preferences were perceived as more confident, affectionate, active, and friendly than those with weaker paw preferences. Results suggest that motor laterality in the cat is strongly related to temperament and that the presence or absence of lateralization has greater implications for the expression of emotion in this species than the direction of the lateralized bias. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

A cross-sectional survey comparing a free treatment program for advanced schistosomiasis japonica to a general assistance program.

PubMed

Song, Langui; Wu, Xiaoying; Zhang, Beibei; Liu, Jiahua; Ning, An; Wu, Zhongdao

2017-11-01

The prevalence and intensity of schistosomiasis has dropped dramatically in China due to an effective integrated control program. However, advanced schistosomiasis is becoming a key challenge on the road to elimination. The aims of this study were to compare the disease condition between advanced cases under the general assistance program (GAP) and free treatment program (FTP) and to determine whether the FTP should be popularized to provide an objective reference for policymakers in China's advanced schistosomiasis control program. One hundred and ninety-four patients with schistosomiasis japonica who were enrolled in the GAP or FTP participated in this study. Little significant difference was observed in the potential confounders, including general characteristics, comorbidities, and lifestyle, indicating a similar effect on the pathology of liver damage caused by schistosome infection. There was no apparent difference in the incidence of common clinical symptoms. Furthermore, no significant difference was observed in the ultrasound findings, implying that the GAP and FTP groups shared a similar degree of liver lesion. With the exception of the abnormal rates of aspartate aminotransferase (AST), alkaline phosphatase (ALP), and hyaluronic acid (HA), the other serological indicators were comparable between the groups. Overall, the FTP is not a better option for controlling advanced schistosomiasis in China. It is important to reveal the precise mechanism underlying the pathogenesis of advanced schistosomiasis so that specific approaches to treating and preventing the development of advanced schistosomiasis can be developed and schistosomiasis can be eliminated in China.

Localization of glossopharyngeal obstruction using nasopharyngeal tube versus Friedman tongue position classification in obstructive sleep apnea hypopnea syndrome.

PubMed

Li, Shuhua; Hei, Renyi; Wu, Dahai; Shi, Hongjin

2014-08-01

Assessing the severity of glossopharyngeal obstruction is important for the diagnosis and therapy of obstructive sleep apnea hypopnea syndrome (OSAHS). The polysomnography (PSG) with nasopharyngeal tube insertion (NPT-PSG) has shown good results in assessing glossopharyngeal obstruction. The objective of this study was to compare NPT-PSG with Friedman tongue position (FTP) classification which was also used to evaluate the glossopharyngeal obstruction. One hundred and five patients with OSAHS diagnosed by PSG were included in the study. All the patients were successfully examined by NPT-PSG. Based on the grade of FTP classification, 105 patients were divided into four groups. The differences of the general clinical data, PSG and NPT-PSG results were analyzed among the four groups. And the coincidence of diagnosing glossopharyngeal obstruction of two methods was calculated. There was no significant difference among the four groups in general clinical data and PSG results. However, NPT-PSG results were significantly different among the four groups. Following with the increasing FTP, apnea hypopnea index increased and lowest saturation of blood oxygen decreased. There were 38 patients with and other 38 patients without glossopharyngeal obstruction diagnosed by both methods. The coincidence of two methods was 72.4 %. NPT-PSG is an easy and effective method in assessing the severity of glossopharyngeal obstruction. The coincidence between the NPT-PSG and FTP classification is good. But in some special OSAHS patients such as glossoptosis, unsuccessful uvulopalatopharyngoplasty or suspicious pachyglossia, NPT-PSG is better than FTP classification.

Blood Accessibility to Fibrin in Venous Thrombosis is Thrombus Age-Dependent and Predicts Fibrinolytic Efficacy: An In Vivo Fibrin Molecular Imaging Study

PubMed Central

Stein-Merlob, Ashley F.; Kessinger, Chase W.; Erdem, S. Sibel; Zelada, Henry; Hilderbrand, Scott A.; Lin, Charles P.; Tearney, Guillermo J.; Jaff, Michael R.; Reed, Guy L.; Henke, Peter K.; McCarthy, Jason R.; Jaffer, Farouc A.

2015-01-01

Fibrinolytic therapy of venous thromboembolism (VTE) is increasingly utilized, yet limited knowledge is available regarding in vivo mechanisms that govern fibrinolytic efficacy. In particular, it is unknown how age-dependent thrombus organization limits direct blood contact with fibrin, the target of blood-based fibrinolytic agents. Utilizing high-resolution in vivo optical molecular imaging with FTP11, a near-infrared fluorescence (NIRF) fibrin-specific reporter, here we investigated the in vivo interrelationships of blood accessibility to fibrin, thrombus age, thrombus neoendothelialization, and fibrinolysis in murine venous thrombosis (VT). In both stasis VT and non-stasis VT, NIRF microscopy showed that FTP11 fibrin binding was thrombus age-dependent. FTP11 localized to the luminal surface of early-stage VT, but only minimally to subacute VT (p<0.001). Transmission electron microscopy of early stage VT revealed direct blood cell contact with luminal fibrin-rich surfaces. In contrast, subacute VT exhibited an encasing CD31+ neoendothelial layer that limited blood cell contact with thrombus fibrin in both VT models. Next we developed a theranostic strategy to predict fibrinolytic efficacy based on the in vivo fibrin accessibility to blood NIRF signal. Mice with variably aged VT underwent FTP11 injection and intravital microscopy (IVM), followed by tissue plasminogen activator infusion to induce VT fibrinolysis. Fibrin molecular IVM revealed that early stage VT, but not subacute VT, bound FTP11 (p<0.05), and experienced higher rates of fibrinolysis and total fibrinolysis (p<0.05 vs. subacute VT). Before fibrinolysis, the baseline FTP11 NIRF signal predicted the net fibrinolysis at 60 minutes (p<0.001). Taken together, these data provide novel insights into the temporal evolution of VT and its susceptibility to therapeutic fibrinolysis. Fibrin molecular imaging may provide a theranostic strategy to identify venous thrombi amenable to fibrinolytic therapies. PMID:26516370

Evidence for posttranslational protein flavinylation in the syphilis spirochete Treponema pallidum: Structural and biochemical insights from the catalytic core of a periplasmic flavin-trafficking protein

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deka, Ranjit K.; Brautigam, Chad A.; Liu, Wei Z.

The syphilis spirochete Treponema pallidum is an important human pathogen but a highly enigmatic bacterium that cannot be cultivated in vitro. T. pallidum lacks many biosynthetic pathways and therefore has evolved the capability to exploit host-derived metabolites via its periplasmic lipoprotein repertoire. We recently reported a flavin-trafficking protein in T. pallidum (Ftp_Tp; TP0796) as the first bacterial metal-dependent flavin adenine dinucleotide (FAD) pyrophosphatase that hydrolyzes FAD into AMP and flavin mononucleotide (FMN) in the spirochete’s periplasm. However, orthologs of Ftp_Tp from other bacteria appear to lack this hydrolytic activity; rather, they bind and flavinylate subunits of a cytoplasmic membrane redoxmore » system (Nqr/Rnf). To further explore this dichotomy, biochemical analyses, protein crystallography, and structure-based mutagenesis were used to show that a single amino acid change (N55Y) in Ftp_Tp converts it from an Mg²⁺-dependent FAD pyrophosphatase to an FAD-binding protein. We also demonstrated that Ftp_Tp has a second enzymatic activity (Mg²⁺-FMN transferase); it flavinylates protein(s) covalently with FMN on a threonine side chain of an appropriate sequence motif using FAD as the substrate. Moreover, mutation of a metal-binding residue (D284A) eliminates Ftp_Tp’s dual activities, thereby underscoring the role of Mg²⁺ in the enzyme-catalyzed reactions. The posttranslational flavinylation activity that can target a periplasmic lipoprotein (TP0171) has not previously been described. The observed activities reveal the catalytic flexibility of a treponemal protein to perform multiple functions. Together, these findings imply mechanisms by which a dynamic pool of flavin cofactor is maintained and how flavoproteins are generated by Ftp_Tp locally in the T. pallidum periplasm.« less

Evidence for posttranslational protein flavinylation in the syphilis spirochete Treponema pallidum: Structural and biochemical insights from the catalytic core of a periplasmic flavin-trafficking protein

DOE PAGES

Deka, Ranjit K.; Brautigam, Chad A.; Liu, Wei Z.; ...

2015-05-05

The syphilis spirochete Treponema pallidum is an important human pathogen but a highly enigmatic bacterium that cannot be cultivated in vitro. T. pallidum lacks many biosynthetic pathways and therefore has evolved the capability to exploit host-derived metabolites via its periplasmic lipoprotein repertoire. We recently reported a flavin-trafficking protein in T. pallidum (Ftp_Tp; TP0796) as the first bacterial metal-dependent flavin adenine dinucleotide (FAD) pyrophosphatase that hydrolyzes FAD into AMP and flavin mononucleotide (FMN) in the spirochete’s periplasm. However, orthologs of Ftp_Tp from other bacteria appear to lack this hydrolytic activity; rather, they bind and flavinylate subunits of a cytoplasmic membrane redoxmore » system (Nqr/Rnf). To further explore this dichotomy, biochemical analyses, protein crystallography, and structure-based mutagenesis were used to show that a single amino acid change (N55Y) in Ftp_Tp converts it from an Mg²⁺-dependent FAD pyrophosphatase to an FAD-binding protein. We also demonstrated that Ftp_Tp has a second enzymatic activity (Mg²⁺-FMN transferase); it flavinylates protein(s) covalently with FMN on a threonine side chain of an appropriate sequence motif using FAD as the substrate. Moreover, mutation of a metal-binding residue (D284A) eliminates Ftp_Tp’s dual activities, thereby underscoring the role of Mg²⁺ in the enzyme-catalyzed reactions. The posttranslational flavinylation activity that can target a periplasmic lipoprotein (TP0171) has not previously been described. The observed activities reveal the catalytic flexibility of a treponemal protein to perform multiple functions. Together, these findings imply mechanisms by which a dynamic pool of flavin cofactor is maintained and how flavoproteins are generated by Ftp_Tp locally in the T. pallidum periplasm.« less

Mitigation of enamel erosion using commercial toothpastes evaluated with optical coherence tomography

NASA Astrophysics Data System (ADS)

Cassimiro-Silva, Patricia Fernandes; Maia, Ana Marly Araújo; Monteiro, Gabriela Queiroz de Melo; Gomes, Anderson S. L.

2016-03-01

The aim of this study was to evaluate the efficacy of commercial toothpastes containing sodium fluoride (NaF), stannous fluoride (SnF2), or casein phosphopeptides (CPP)-amorphous calcium phosphate (ACP)/NaF regarding their potential to inhibit enamel erosion. Twenty-eight 4×4 mm enamel specimens were randomly allocated into 4 groups (n=7): negative control; Pronamel (NaF); Pro Health (SnF2/NaF); Mi Paste Plus (CPP-ACP/NaF). Erosive cycles with 0.5% citric acid, 5 times, 3 minutes/day for 7 days were performed. After the first and last cycle of each day, toothpaste slurries were applied for 2 min. The quantitative analysis was accomplished using Contact Profilometry and Optical Coherence Tomography (OCT), complemented by roughness and qualitative scanning electron microscopy (SEM) analysis. OCT and Profilometry analysis showed similar effectiveness in measuring the reduction of mineral loss. A significant increase in the mean roughness values was observed on eroded surface and also on treated surface as revealed by scanning electron microscopy. The use of SnF2/NaF toothpaste was the most effective method for reducing mineral loss. As quantitative methods, OCT and Contact Profilometry showed no statistical differences. OCT, which was used for this purpose for the first time, has the advantage of being noninvasive, and therefore have the potential for clinical application.

Supersonic laser spray of aluminium alloy on a ceramic substrate

NASA Astrophysics Data System (ADS)

Riveiro, A.; Lusquiños, F.; Comesaña, R.; Quintero, F.; Pou, J.

2007-12-01

Applying a ceramic coating onto a metallic substrate to improve its wear resistance or corrosion resistance has attracted the interest of many researchers during decades. However, only few works explore the possibility to apply a metallic layer onto a ceramic material. This work presents a novel technique to coat ceramic materials with metals: the supersonic laser spraying. In this technique a laser beam is focused on the surface of the precursor metal in such a way that the metal is transformed to the liquid state in the beam-metal interaction zone. A supersonic jet expels the molten material and propels it to the surface of the ceramic substrate. In this study, we present the preliminary results obtained using the supersonic laser spray to coat a commercial cordierite ceramic plate with an Al-Cu alloy using a 3.5 kW CO 2 laser and a supersonic jet of Argon. Coatings were characterized by scanning electron microscopy (SEM) and interferometric profilometry.

Online phase measuring profilometry for rectilinear moving object by image correction

NASA Astrophysics Data System (ADS)

Yuan, Han; Cao, Yi-Ping; Chen, Chen; Wang, Ya-Pin

2015-11-01

In phase measuring profilometry (PMP), the object must be static for point-to-point reconstruction with the captured deformed patterns. While the object is rectilinearly moving online, the size and pixel position differences of the object in different captured deformed patterns do not meet the point-to-point requirement. We propose an online PMP based on image correction to measure the three-dimensional shape of the rectilinear moving object. In the proposed method, the deformed patterns captured by a charge-coupled diode camera are reprojected from the oblique view to an aerial view first and then translated based on the feature points of the object. This method makes the object appear stationary in the deformed patterns. Experimental results show the feasibility and efficiency of the proposed method.

78 FR 63465 - Adjusting Civil Money Penalties for Inflation

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-24

..., Bureau of Labor Statistics, and is available at its Web site: ftp://ftp.bls.gov/pub/special.requests/cpi... violation under section 5.65(c) and (d) of the Act. C. Mathematical Calculation 1. The adjustment... to the Bureau of Labor Statistics, the CPI for June 2001 was 178, and the CPI for June 2012 was 229...

The Family Transition Program: Implementation and Early Impacts of Florida's Initial Time-Limited Welfare Program.

ERIC Educational Resources Information Center

Bloom, Dan; And Others

Florida's Family Transition Program (FTP) combines a welfare time limit of 24-36 months with services, requirements, and financial incentives designed to help welfare recipients find and hold jobs. Aid to Families with Dependent Children (AFDC) applicants who were not incapacitated, disabled, or otherwise exempt from the FTP program were randomly…

The Relationship of Work Values to Satisfaction with Retirement and Future Time Perspective.

ERIC Educational Resources Information Center

Halpern, Doryan

This study tested two hypotheses: (1) the importance attached to the intrinsic aspects of work is negatively related to retirement satisfaction, maximum extension of future time perspective (FTP), and the number of events anticipated in the future; (2) retirement satisfaction is positively related to FTP maximum length and events anticipated.…

Piecewise Linear Approach for Timing Simulation of VLSI (Very-Large-Scale-Integrated) Circuits on Serial and Parallel Computers.

DTIC Science & Technology

1987-12-01

8217ftp.. *,*IS ~. ~bw ~ ft.. p ’ft ’ft ft.. ’ft *I~ P* ’ft ’p 0n-I ci via 1 ca j I .11’ ft~ ’ fttH vialca *- ’ft ft..I ft. ’ft ft.. --ft ..ft ’ft ftp

Global Ensemble Upgrade - 20060530

Science.gov Websites

products available on both the NCEP ftp server (ftpprd.ncep.noaa.gov/pub/data/) and the NWS ftp server processing routines so that they can continue to receive and use these data. The nature of these changes are of global ensemble data will be drastically changed to allow for better system performance on the

The Impact of FTP on Commitment to Career Choices: Situating within a Social Cognitive Perspective

ERIC Educational Resources Information Center

Phan, Huy P.

2015-01-01

Future time perspective (FTP) is an important theoretical construct that may assist educators in their understanding of individuals' learning, motivation and decision-making. There is empirical evidence attesting to the predictive effects of anticipation of future goals on both cognitive and non-cognitive outcomes. The present study, based on…

The impact of a faculty learning community on professional and personal development: the facilitator training program of the American Academy on Communication in Healthcare.

PubMed

Chou, Calvin L; Hirschmann, Krista; Fortin, Auguste H; Lichstein, Peter R

2014-07-01

Relationship-centered care attends to the entire network of human relationships essential to patient care. Few faculty development programs prepare faculty to teach principles and skills in relationship-centered care. One exception is the Facilitator Training Program (FTP), a 25-year-old training program of the American Academy on Communication in Healthcare. The authors surveyed FTP graduates to determine the efficacy of its curriculum and the most important elements for participants' learning. In 2007, surveys containing quantitative and narrative elements were distributed to 51 FTP graduates. Quantitative data were analyzed using descriptive statistics. The authors analyzed narratives using Burke's dramatistic pentad as a qualitative framework to delineate how interrelated themes interacted in the FTP. Forty-seven respondents (92%) identified two essential acts that happened in the program: an iterative learning process, leading to heightened personal awareness and group facilitation skills; and longevity of learning and effect on career. The structure of the program's learning community provided the scene, and the agents were the participants, who provided support and contributed to mutual success. Methods of developing skills in personal awareness, group facilitation, teaching, and feedback constituted agency. The purpose was to learn skills and to join a community to share common values. The FTP is a learning community that provided faculty with skills in principles of relationship-centered care. Four further features that describe elements of this successful faculty-based learning community are achievement of self-identified goals, distance learning modalities, opportunities to safely discuss workplace issues outside the workplace, and self-renewing membership.

Studies on the protective efficacy of freeze thawed promastigote antigen of Leishmania donovani along with various adjuvants against visceral leishmaniasis infection in mice.

PubMed

Thakur, Ankita; Kaur, Harpreet; Kaur, Sukhbir

2015-09-01

Visceral leishmaniasis (VL) caused by Leishmania donovani persists as a major public health issue in tropical and subtropical areas of the world. Current treatment of this disease relies on use of drugs. It is doubtful that chemotherapy can alone eradicate the disease, so there is a need for an effective vaccine. Killed antigen candidates remain a good prospect considering their ease of formulation, stability, low cost and safety. To enhance the efficacy of killed vaccines suitable adjuvant and delivery system are needed. Therefore, the current study was conducted to determine the protective efficacy of freeze-thawed L. donovani antigen in combination with different adjuvants against experimental infection of VL. For this, BALB/c mice were immunized thrice at an interval of two weeks. Challenge infection was given two weeks after last immunization. Mice were sacrificed after last immunization and on different post challenge/infection days. Immunized mice showed significant reduction in parasite burden, enhanced DTH responses with increased levels of Th1 cytokines and lower levels of Th2 cytokines, thus indicating the development of a protective Th1 response. Maximum protection was achieved with liposome encapsulated freeze thawed promastigote (FTP) antigen of L. donovani and it was followed by group immunized with FTP+MPL-A, FTP+saponin, FTP+alum and FTP antigen (alone). The present study highlights greater efficacy of freeze thawed promastigote antigen as a potential vaccine candidate along with effective adjuvant formulations against experimental VL infection. Copyright © 2015 Elsevier GmbH. All rights reserved.

Measuring Future Time Perspective across Adulthood: Development and Evaluation of a Brief Multidimensional Questionnaire

PubMed Central

Brothers, Allyson; Chui, Helena; Diehl, Manfred

2014-01-01

Purpose of the Study: Despite calls for the consideration of future time perspective (FTP) as a multidimensional construct, mostly unidimensional measurement instruments have been used. This study had two objectives: (a) to develop a brief multidimensional questionnaire for assessing FTP in adulthood and evaluate its psychometric properties; and (b) to examine age associations and age-group differences of the dimensions of FTP. Design and Methods: Data were collected from 625 community-residing adults between the ages of 18 and 93, representing young, middle-aged, and older adults. The psychometric evaluation involved exploratory factor analyses (EFA) and confirmatory FA (CFA), reliability and validity analyses, and measurement invariance testing. Zero-order and partial correlations were used to examine the association of the dimensions of FTP with age, and multivariate analysis of variance was used to examine age-group differences. Results: EFA and CFA supported a three-factor solution: Future as Open, Future as Limited, and Future as Ambiguous. Metric measurement invariance for this factor structure was confirmed across the three age groups. Reliability and validity analyses provided evidence of sound psychometric properties of the brief questionnaire. Age was negatively associated with Future as Open and positively associated with Future as Limited. Young adults exhibited significantly greater ambiguity toward the future than middle-aged or older adults. Implications: This study provides evidence in support of the psychometric properties of a new brief multidimensional FTP scale. It also provides evidence for a pattern of age associations and age-group differences consistent with life-span developmental theory. PMID:25063938

Exploring the Effects of Changes in Future Time Perspective and Perceived Instrumentality on Graded Performance

ERIC Educational Resources Information Center

Eren, Altay

2009-01-01

Introduction: This study aimed to explore the possible changes in the Future Time Perspective (FTP) and Perceived Instrumentality (PI) over time as long as one academic semester, as well as to explore whether those changes in FTP and PI explained students' Graded Performance (GP) with regard to a specific course; educational psychology. Method: A…

Sex and Age Differences in Future Temporal Perspective.

ERIC Educational Resources Information Center

Grant, Edward; Sawler, Joyce

This study explored sex differences in the Future Temporal Perspectives (FTP) of children. The influences of age, social class and intelligence were also investigated, or FTP was generally believed to be affected by them. Subjects were 96 boys and 96 girls, selected from 26 schools in Nova Scotia, from three age groups: 9.6-11.0, 12.0-13.6, and…

Improving ECG Competence in Medical Trainees in a UK District General Hospital

PubMed Central

McAloon, Christopher; Leach, Helen; Gill, Simrat; Aluwalia, Arun; Trevelyan, Jasper

2014-01-01

Background Competency in electrocardiogram (ECG) interpretation is central to undergraduate and postgraduate clinical training. Studies have demonstrated ECGs are interpreted sub-optimally. Our study compares the effectiveness of two learning strategies to improve competence and confidence. Method A 1-month prospective randomized study compared the strategies in two cohorts: undergraduate third year medical students and postgraduate foundation year one (FY1) doctors. Both had blinded randomization to one of these learning strategies: focused teaching program (FTP) and self-directed learning (SDL). All volunteers completed a confidence questionnaire before and after allocation learning strategy and an ECG recognition multiple choice question (MCQ) paper at the end of the learning period. Results The FTP group of undergraduates demonstrated a significant difference in successfully interpreting “ventricular tachycardia” (P = 0.046) and “narrow complex tachycardia” (P = 0.009) than the SDL group. Participant confidence increased in both learning strategies. FTP confidence demonstrated a greater improvement than SDL for both cohorts. Conclusion A dedicated teaching program can improve trainee confidence and competence in ECG interpretation. A larger benefit is observed in undergraduates and those undertaking a FTP. PMID:28392875

Regional fringe analysis for improving depth measurement in phase-shifting fringe projection profilometry

NASA Astrophysics Data System (ADS)

Chien, Kuang-Che Chang; Tu, Han-Yen; Hsieh, Ching-Huang; Cheng, Chau-Jern; Chang, Chun-Yen

2018-01-01

This study proposes a regional fringe analysis (RFA) method to detect the regions of a target object in captured shifted images to improve depth measurement in phase-shifting fringe projection profilometry (PS-FPP). In the RFA method, region-based segmentation is exploited to segment the de-fringed image of a target object, and a multi-level fuzzy-based classification with five presented features is used to analyze and discriminate the regions of an object from the segmented regions, which were associated with explicit fringe information. Then, in the experiment, the performance of the proposed method is tested and evaluated on 26 test cases made of five types of materials. The qualitative and quantitative results demonstrate that the proposed RFA method can effectively detect the desired regions of an object to improve depth measurement in the PS-FPP system.

The interaction of atomic oxygen with copper: An XPS, AES, XRD, optical transmission, and stylus profilometry study

NASA Technical Reports Server (NTRS)

Raikar, Ganesh N.; Gregory, John C.; Christl, Ligia C.; Peters, Palmer N.

1993-01-01

The University of Alabama in Huntsville (UAH) experiment A-0114 was designed to study the reaction of material surfaces with low earth orbits (LEO) atmospheric oxygen. The experiment contained 128 one-inch circular samples; metals, polymers, carbons, and semiconductors. Half of these samples were exposed on the front of the Long Duration Exposure Facility (LDEF) and remaining on the rear. Among metal samples, copper has shown some interesting new results. There were two forms of copper samples: a thin film sputter-coated on fused silica and a solid piece of OFHC copper. They were characterized by x-ray and Auger electron spectroscopies, x-ray diffraction, and high resolution profilometry. Cu 2p core level spectra were used to demonstrate the presence of Cu2O and CuO and to determine the oxidation states.

Analysis of a new phase and height algorithm in phase measurement profilometry

NASA Astrophysics Data System (ADS)

Bian, Xintian; Zuo, Fen; Cheng, Ju

2018-04-01

Traditional phase measurement profilometry adopts divergent illumination to obtain the height distribution of a measured object accurately. However, the mapping relation between reference plane coordinates and phase distribution must be calculated before measurement. Data are then stored in a computer in the form of a data sheet for standby applications. This study improved the distribution of projected fringes and deducted the phase-height mapping algorithm when the two pupils of the projection and imaging systems are of unequal heights and when the projection and imaging axes are on different planes. With the algorithm, calculating the mapping relation between reference plane coordinates and phase distribution prior to measurement is unnecessary. Thus, the measurement process is simplified, and the construction of an experimental system is made easy. Computer simulation and experimental results confirm the effectiveness of the method.

Blind phase error suppression for color-encoded digital fringe projection profilometry

NASA Astrophysics Data System (ADS)

Ma, S.; Zhu, R.; Quan, C.; Li, B.; Tay, C. J.; Chen, L.

2012-04-01

Color-encoded digital fringe projection profilometry (CDFPP) has the advantage of fast speed, non-contact and full-field testing. It is one of the most important dynamic three-dimensional (3D) profile measurement techniques. However, due to factors such as color cross-talk and gamma distortion of electro-optical devices, phase errors arise when conventional phase-shifting algorithms with fixed phase shift values are utilized to retrieve phases. In this paper, a simple and effective blind phase error suppression approach based on isotropic n-dimensional fringe pattern normalization (INFPN) and carrier squeezing interferometry (CSI) is proposed. It does not require pre-calibration for the gamma and color-coupling coefficients or the phase shift values. Simulation and experimental works show that our proposed approach is able to effectively suppress phase errors and achieve accurate measurement results in CDFPP.

Surface characterization protocol for precision aspheric optics

NASA Astrophysics Data System (ADS)

Sarepaka, RamaGopal V.; Sakthibalan, Siva; Doodala, Somaiah; Panwar, Rakesh S.; Kotaria, Rajendra

2017-10-01

In Advanced Optical Instrumentation, Aspherics provide an effective performance alternative. The aspheric fabrication and surface metrology, followed by aspheric design are complementary iterative processes for Precision Aspheric development. As in fabrication, a holistic approach of aspheric surface characterization is adopted to evaluate actual surface error and to aim at the deliverance of aspheric optics with desired surface quality. Precision optical surfaces are characterized by profilometry or by interferometry. Aspheric profiles are characterized by contact profilometers, through linear surface scans to analyze their Form, Figure and Finish errors. One must ensure that, the surface characterization procedure does not add to the resident profile errors (generated during the aspheric surface fabrication). This presentation examines the errors introduced post-surface generation and during profilometry of aspheric profiles. This effort is to identify sources of errors and is to optimize the metrology process. The sources of error during profilometry may be due to: profilometer settings, work-piece placement on the profilometer stage, selection of zenith/nadir points of aspheric profiles, metrology protocols, clear aperture - diameter analysis, computational limitations of the profiler and the software issues etc. At OPTICA, a PGI 1200 FTS contact profilometer (Taylor-Hobson make) is used for this study. Precision Optics of various profiles are studied, with due attention to possible sources of errors during characterization, with multi-directional scan approach for uniformity and repeatability of error estimation. This study provides an insight of aspheric surface characterization and helps in optimal aspheric surface production methodology.

Emergency medicine resident attitudes and perceptions of HIV testing before and after a focused training program and testing implementation.

PubMed

Hsieh, Yu-Hsiang; Jung, Julianna J; Shahan, Judy B; Moring-Parris, Daniel; Kelen, Gabor D; Rothman, Richard E

2009-11-01

The objectives were to determine attitudes and perceptions (A&P) of emergency medicine (EM) residents toward emergency department (ED) routine provider-driven rapid HIV testing services and the impact of both a focused training program (FTP) and implementation of HIV testing on A&P. A three-phase, consecutive, anonymous, identity-unlinked survey was conducted pre-FTP, post-FTP, and 6 months postimplementation. The survey was designed to assess residents' A&P using a five-point Likert scale. A preimplementation FTP provided both the rationale for the HIV testing program and the planned operational details of the intervention. The HIV testing program used only indigenous ED staff to deliver HIV testing as part of standard-of-care in an academic ED. The impact of the FTP and implementation on A&P were analyzed by multivariate regression analysis using generalized estimating equations to control for repeated measurements in the same individuals. A "favorable" A&P was operationally defined as a mean score of >3.5, "neutral" as mean score of 2.5 to 3.5, and "unfavorable" as mean score of <2.5. Thirty of 36 residents (83.3%) participated in all three phases. Areas of favorable A&P found in phase I and sustained through phases II and III included "ED serving as a testing venue" (score range = 3.7-4.1) and "emergency medicine physicians offering the test" (score range = 3.9-4.1). Areas of unfavorable and neutral A&P identified in phase I were all operational barriers and included required paperwork (score = 3.2), inadequate staff support (score = 2.2), counseling and referral requirements (score range = 2.2-3.1), and time requirements (score = 2.9). Following the FTP, significant increases in favorable A&P were observed with regard to impact of the intervention on modification of patient risk behaviors, decrease in rates of HIV transmission, availability of support staff, and self-confidence in counseling and referral (p < 0.05). At 6 months postimplementation, all A&P except for time requirements and lack of support staff scored favorably or neutral. During the study period, 388 patients were consented for and received HIV testing; six (1.5%) were newly confirmed HIV positive. Emergency medicine residents conceptually supported HIV testing services. Most A&P were favorably influenced by both the FTP and the implementation. All areas of negative A&P involved operational requirements, which may have influenced the low overall uptake of HIV testing during the study period. (c) 2009 by the Society for Academic Emergency Medicine.

40 CFR 600.208-08 - Calculation of FTP-based and HFET-based fuel economy values for a model type.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Calculation of FTP-based and HFET-based fuel economy values for a model type. 600.208-08 Section 600.208-08 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Fuel Economy Regulations fo...

40 CFR 600.206-08 - Calculation and use of FTP-based and HFET-based fuel economy values for vehicle configurations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Calculation and use of FTP-based and HFET-based fuel economy values for vehicle configurations. 600.206-08 Section 600.206-08 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Fuel...

40 CFR 600.206-12 - Calculation and use of FTP-based and HFET-based fuel economy and carbon-related exhaust emission...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Calculation and use of FTP-based and HFET-based fuel economy and carbon-related exhaust emission values for vehicle configurations. 600.206-12 Section 600.206-12 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND CARBON-RELATED EXHAUST...

40 CFR 600.113-12 - Fuel economy, CO2 emissions, and carbon-related exhaust emission calculations for FTP, HFET, US06...

Code of Federal Regulations, 2013 CFR

2013-07-01

... economy and carbon-related exhaust emission values require input of the weighted grams/mile values for... the calculations of the carbon-related exhaust emissions require the input of grams/mile values for... as follows: (1) Calculate the weighted grams/mile values for the FTP test for CO2, HC, and CO, and...

40 CFR 600.113-12 - Fuel economy, CO2 emissions, and carbon-related exhaust emission calculations for FTP, HFET, US06...

Code of Federal Regulations, 2014 CFR

2014-07-01

... economy and carbon-related exhaust emission values require input of the weighted grams/mile values for... the calculations of the carbon-related exhaust emissions require the input of grams/mile values for... as follows: (1) Calculate the weighted grams/mile values for the FTP test for CO2, HC, and CO, and...

40 CFR 600.113-12 - Fuel economy, CO2 emissions, and carbon-related exhaust emission calculations for FTP, HFET, US06...

Code of Federal Regulations, 2012 CFR

2012-07-01

... economy and carbon-related exhaust emission values require input of the weighted grams/mile values for... the calculations of the carbon-related exhaust emissions require the input of grams/mile values for... as follows: (1) Calculate the weighted grams/mile values for the FTP test for CO2, HC, and CO, and...

40 CFR 600.113-08 - Fuel economy calculations for FTP, HFET, US06, SC03 and cold temperature FTP tests.

Code of Federal Regulations, 2011 CFR

2011-07-01

... paragraph (g) of this section. CH3OH = Grams/mile CH3OH (methanol) as obtained in paragraph (d) of this..., additionally for methanol-fueled automobiles, methanol (CH3OH) and formaldehyde (HCHO); and additionally for... for HC, CO and CO2; and, additionally for methanol-fueled automobiles, CH3OH and HCHO; and...

40 CFR 85.525 - Applicable standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... results from the emission data vehicle (EDV) representing the pre-conversion test group. The sum of CO2, CH4, and N2O shall be calculated for pre- and post-conversion FTP test results, where CH4 and N2O are..., and N2O shall be calculated for pre- and post-conversion FTP test results, where CH4 and N2O are...

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The original concept envisioned for the use of Fischer-Tropsch processing (FTP) of United States associated natural gas in this study was to provide a way of utilizing gas which could not be brought to market because a pipeline was not available or for which there was no local use. Conversion of gas by FTP could provide a means of utilizing offshore associated gas which would not require installation of a pipeline or re-injection. The premium quality F-T hydrocarbons produced by conversion of the gas can be transported in the same way as the crude oil or in combination (blended) withmore » it, eliminating the need for a separate gas transport system. FTP will produce a synthetic crude oil, thus increasing the effective size of the resource. The two conventional approaches currently used in US territory for handling of natural gas associated with crude petroleum production are re-injection and pipelining. Conversion of natural gas to a liquid product which can be transported to shore by tanker can be accomplished by FTP to produce hydrocarbons, or by conversion to chemical products such as methanol or ammonia, or by cryogenic liquefaction (LNG). This study considers FTP and briefly compares it to methanol and LNG. The Energy International Corporation cobalt catalyst, ratio adjusted, slurry bubble column F-T process was used as the basis for the study and the comparisons. An offshore F-T plant can best be accommodated by an FPSO (Floating Production, Storage, Offloading vessel) based on a converted surplus tanker, such as have been frequently used around the world recently. Other structure types used in deep water (platforms) are more expensive and cannot handle the required load.« less

Measuring future time perspective across adulthood: development and evaluation of a brief multidimensional questionnaire.

PubMed

Brothers, Allyson; Chui, Helena; Diehl, Manfred

2014-12-01

Despite calls for the consideration of future time perspective (FTP) as a multidimensional construct, mostly unidimensional measurement instruments have been used. This study had two objectives: (a) to develop a brief multidimensional questionnaire for assessing FTP in adulthood and evaluate its psychometric properties; and (b) to examine age associations and age-group differences of the dimensions of FTP. Data were collected from 625 community-residing adults between the ages of 18 and 93, representing young, middle-aged, and older adults. The psychometric evaluation involved exploratory factor analyses (EFA) and confirmatory FA (CFA), reliability and validity analyses, and measurement invariance testing. Zero-order and partial correlations were used to examine the association of the dimensions of FTP with age, and multivariate analysis of variance was used to examine age-group differences. EFA and CFA supported a three-factor solution: Future as Open, Future as Limited, and Future as Ambiguous. Metric measurement invariance for this factor structure was confirmed across the three age groups. Reliability and validity analyses provided evidence of sound psychometric properties of the brief questionnaire. Age was negatively associated with Future as Open and positively associated with Future as Limited. Young adults exhibited significantly greater ambiguity toward the future than middle-aged or older adults. This study provides evidence in support of the psychometric properties of a new brief multidimensional FTP scale. It also provides evidence for a pattern of age associations and age-group differences consistent with life-span developmental theory. © The Author 2014. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Analysis of conference abstract-to-publication rate in UK orthopaedic research.

PubMed

Collier, Thomas; Roadley-Battin, Michelle; Darlow, Chloe; Chant, Philip; Hing, Caroline B; Smith, Toby O

2018-02-01

Presentation of research at orthopaedic conferences is an important component for surgical evidence-based practice. However, there remains uncertainty as to how many conference abstracts proceed to achieve full-text publication (FTP) for wider dissemination. This study aimed to determine the abstract-to-publication rate (APR) of research presented in the largest hip and knee orthopaedic meetings in the UK, and to identify predictive factors which influence the APR. All published abstracts (n=744) from the 2006, 2008, 2009 and 2010 British Hip Society (BHS) and the 2007, 2009, 2010 and 2011 British Association for Surgery of the Knee (BASK) annual conference meetings were examined by four researchers independently. To determine whether abstracts had been published in full-text form, Google Scholar, Medline and EMBASE evidence databases were used to verify FTP status. Variables including sample size, statistical significance, grade of the first author, research affiliated institution and research design were extracted and analysed to identify whether these were associated with FTP. 176 out of 744 abstracts achieved FTP status (APR: 23.7%). Factors associated with FTP status included statistically significant results (P<0.01) and research design (P=0.02). Factors not associated included sample size, grade of the first author and research affiliated institution (P>0.05). APRs of the assessed BHS and BASK annual conference presentations are low in comparison to other scientific meetings. Encouragement should be provided to clinicians and academics to submit their work for publication to address this short fall, thereby enhancing the potential for full-text research publications to inform evidence-based orthopaedics. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Absorbed radiation dosimetry of the D3-specific PET radioligand [18F]FluorTriopride estimated using rodent and nonhuman primate.

PubMed

Laforest, Richard; Karimi, Morvarid; Moerlein, Stephen M; Xu, Jinbin; Flores, Hubert P; Bognar, Christopher; Li, Aixiao; Mach, Robert H; Perlmutter, Joel S; Tu, Zhude

2016-01-01

[ 18 F]FluorTriopride ([ 18 F]FTP) is a dopamine D 3 -receptor preferring radioligand with potential for investigation of neuropsychiatric disorders including Parkinson disease, dystonia and schizophrenia. Here we estimate human radiation dosimetry for [ 18 F]FTP based on the ex-vivo biodistribution in rodents and in vivo distribution in nonhuman primates. Biodistribution data were generated using male and female Sprague-Dawley rats injected with ~370 KBq of [ 18 F]FTP and euthanized at 5, 30, 60, 120, and 240 min. Organs of interest were dissected, weighed and assayed for radioactivity content. PET imaging studies were performed in two male and one female macaque fascicularis administered 143-190 MBq of [ 18 F]FTP and scanned whole-body in sequential sections. Organ residence times were calculated based on organ time activity curves (TAC) created from regions of Interest. OLINDA/EXM 1.1 was used to estimate human radiation dosimetry based on scaled organ residence times. In the rodent, the highest absorbed radiation dose was the upper large intestines (0.32-0.49 mGy/MBq), with an effective dose of 0.07 mSv/MBq in males and 0.1 mSv/MBq in females. For the nonhuman primate, however, the gallbladder wall was the critical organ (1.81 mGy/MBq), and the effective dose was 0.02 mSv/MBq. The species discrepancy in dosimetry estimates for [ 18 F]FTP based on rat and primate data can be attributed to the slower transit of tracer through the hepatobiliary track of the primate compared to the rat, which lacks a gallbladder. Out findings demonstrate that the nonhuman primate model is more appropriate model for estimating human absorbed radiation dosimetry when hepatobiliary excretion plays a major role in radiotracer elimination.

Predictors of clinical outcome in fibromyalgia after a brief interdisciplinary fibromyalgia treatment program: single center experience.

PubMed

Oh, Terry H; Hoskin, Tanya L; Luedtke, Connie A; Weingarten, Toby N; Vincent, Ann; Kim, Chul H; Thompson, Jeffrey M

2012-04-01

To determine which patient characteristics are closely associated with a positive response to a brief interdisciplinary fibromyalgia treatment program (FTP). A prospective cohort study. FTP at a tertiary medical center. A total of 536 patients with a confirmed diagnosis of fibromyalgia who underwent the FTP and completed the Fibromyalgia Impact Questionnaire (FIQ) at baseline and 6-12 months after treatment. A brief 1.5-day interdisciplinary FTP, which included evaluation with a registered nurse and a physician for a diagnosis or confirmation of fibromyalgia, fibromyalgia education, interactive self management session, and physical and occupational therapy. The responder definition was an improvement of 14% or more in the FIQ total score from their baseline to 6-12 months after treatment. Mean (standard deviation) age of our patients was 50.3 ± 13.0 years; 515 women (96%) and 23 men (4%). Two hundred forty-eight patients (46%) met the responder definition at 6-12 months follow-up. In an univariate analysis, younger age (P = .008), college or higher education (P = .02), fewer tender points (P = .048), and higher FIQ depression subscore (P = .02) significantly predicted positive response. In a multivariate analysis, these factors all remained statistically significant. In addition, a positive abuse history became significant (P = .03). There was no significant association for gender, duration of symptoms, marital status, employment, smoking status, or 3 numeric rating scale pain scores. Patients with younger age, more years of education (with college or graduate degree), higher baseline FIQ depression score, lower tender point count, and absent abuse history experience greater benefit from a brief FTP. Copyright © 2012 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

Fine tangled pili expressed by Haemophilus ducreyi are a novel class of pili.

PubMed Central

Brentjens, R J; Ketterer, M; Apicella, M A; Spinola, S M

1996-01-01

Haemophilus ducreyi synthesizes fine, tangled pili composed predominantly of a protein whose apparent molecular weight is 24,000 (24K). A hybridoma, 2D8, produced a monoclonal antibody (MAb) that bound to a 24K protein in H. ducreyi strains isolated from diverse geographic locations. A lambda gt11 H. ducreyi library was screened with MAb 2D8. A 3.5-kb chromosomal insert from one reactive plaque was amplified and ligated into the pCRII vector. The recombinant plasmid, designated pHD24, expressed a 24K protein in Escherichia coli INV alpha F that bound MAb 2D8. The coding sequence of the 24K gene was localized by exonuclease III digestion. The insert contained a 570-bp open reading frame, designated ftpA (fine, tangled pili). Translation of ftpA predicted a polypeptide with a molecular weight of 21.1K. The predicted N-terminal amino acid sequence of the polypeptide encoded by ftpA was identical to the N-terminal amino acid sequence of purified pilin and lacked a cleavable signal sequence. Primer extension analysis of ftpA confirmed the lack of a leader peptide. The predicted amino acid sequence lacked homology to known pilin sequences but shared homology with the sequences of E. coli Dps and Treponema pallidum antigen TpF1 or 4D, proteins which associate to form ordered rings. An isogenic pilin mutant, H. ducreyi 35000ftpA::mTn3(Cm), was constructed by shuttle mutagenesis and did not contain pili when examined by electron microscopy. We conclude that H. ducreyi synthesizes fine, tangled pili that are composed of a unique major subunit, which may be exported by a signal sequence independent mechanism. PMID:8550517

Sensitivity analysis of pars-tensa young's modulus estimation using inverse finite-element modeling

NASA Astrophysics Data System (ADS)

Rohani, S. Alireza; Elfarnawany, Mai; Agrawal, Sumit K.; Ladak, Hanif M.

2018-05-01

Accurate estimates of the pars-tensa (PT) Young's modulus (EPT) are required in finite-element (FE) modeling studies of the middle ear. Previously, we introduced an in-situ EPT estimation technique by optimizing a sample-specific FE model to match experimental eardrum pressurization data. This optimization process requires choosing some modeling assumptions such as PT thickness and boundary conditions. These assumptions are reported with a wide range of variation in the literature, hence affecting the reliability of the models. In addition, the sensitivity of the estimated EPT to FE modeling assumptions has not been studied. Therefore, the objective of this study is to identify the most influential modeling assumption on EPT estimates. The middle-ear cavity extracted from a cadaveric temporal bone was pressurized to 500 Pa. The deformed shape of the eardrum after pressurization was measured using a Fourier transform profilometer (FTP). A base-line FE model of the unpressurized middle ear was created. The EPT was estimated using golden section optimization method, which minimizes the cost function comparing the deformed FE model shape to the measured shape after pressurization. The effect of varying the modeling assumptions on EPT estimates were investigated. This included the change in PT thickness, pars flaccida Young's modulus and possible FTP measurement error. The most influential parameter on EPT estimation was PT thickness and the least influential parameter was pars flaccida Young's modulus. The results of this study provide insight into how different parameters affect the results of EPT optimization and which parameters' uncertainties require further investigation to develop robust estimation techniques.

Development of real-world driving cycles and estimation of emission factors for in-use light-duty gasoline vehicles in urban areas.

PubMed

Hwa, Mei-Yin; Yu, Tai-Yi

2014-07-01

This investigation adopts vehicle tracking manner to establish real-world driving patterns and estimates emission factors with dynamometers with 23 traffic-driving variables for 384 in-use light-duty passenger vehicles during non-rush hour. Adequate numbers of driving variables were decided with factor analysis and cluster analysis. The dynamometer tests were performed on FTP75 cycle and five local driving cycles derived from real-world speed profiles. Results presented that local driving cycles and FTP75 cycle were completely different in driving characteristic parameters of typical driving cycles and emission factors. The highest values of emission factor ratios of local driving cycle and FTP75 cycle for CO, NMHC, NO x , CH4, and CO2 were 1.38, 1.65, 1.58, 1.39, and 1.14, respectively.

40 CFR 600.208-12 - Calculation of FTP-based and HFET-based fuel economy and carbon-related exhaust emission values...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Calculation of FTP-based and HFET-based fuel economy and carbon-related exhaust emission values for a model type. 600.208-12 Section 600.208-12 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR...

Temporal horizon: modulation by smoking status and gender

PubMed Central

Jones, Bryan A.; Landes, Reid D.; Yi, Richard; Bickel, Warren K.

2009-01-01

Recently, delay discounting has been argued to be conceptually consistent with the notion of temporal horizon (Bickel et al., 2008). Temporal horizon refers to the temporal distance over which behavioral events or objects can influence behavior. Here we examine the results on two putative measures of temporal horizon, future time perspective (FTP) and delay discounting, collected over three separate studies (n = 227), to determine the influence of smoking and gender on temporal horizon. By comparing the results on these temporal horizon measures we address our population of interest: women who smoke. One of the measures of FTP indicates that smoking women have a shorter temporal horizon than their nonsmoking counterparts. Additionally, the story completion measures of FTP are positively correlated with delay discounting. In contrast, results of delay discounting measures showed no difference between smoking women and nonsmoking women, while results of delay discounting measures indicated smoking men have a shorter temporal horizon than non-smoking men. Additionally, the results of the FTP story completion measure indicated that lower third income earners had a shortened temporal horizon compared to upper third income earners. A possible explanation for these results is explored, and the implications of the modulation of temporal horizon by gender and smoking are discussed. PMID:19446407

Social media and professionalism: a retrospective content analysis of Fitness to Practise cases heard by the GDC concerning social media complaints.

PubMed

Neville, P

2017-09-08

Introduction Since 2013, all General Dental Council (GDC) registrants' online activities have been regulated by the GDC's social media guidelines. Failure to comply with these guidelines results in a Fitness to Practise (FtP) complaint being investigated.Aims This study explores the prevalence of social media related FtP cases investigated by the GDC from 1 September 2013 to 21 June 2016.Method Documentary analysis of social media related FtP cases published on the GDC's website was undertaken. All cases that met the study's inclusion criteria were analysed using a quantitative content analysis framework.Findings It was found that 2.4% of FtP cases published on the GDC website during that period were related to breaches of the social media guidelines. All of the cases investigated were proven and upheld. Most of those named in the complaints were dental nurses and the most common type of complaint was inappropriate Facebook comments.Conclusions The low incidence rate should be interpreted with caution, being illustrative of the types of issues that might arise rather than the volume. The GDC will need to remain vigilant in this area and ensure that social media awareness training is an active part of CPD for all the dental team.

Using optical profilometry to characterize cell membrane roughness influenced by amyloid-beta 42 aggregates and electric fields

NASA Astrophysics Data System (ADS)

Pan, Huei-Jyuan; Wang, Ruei-Lin; Xiao, Jian-Long; Chang, Yu-Jen; Cheng, Ji-Yen; Chen, Yun-Ru; Lee, Chau-Hwang

2014-01-01

The membrane roughness of Neuro-2a neroblastoma cells is measured by using noninterferometric wide-field optical profilometry. The cells are treated with the fibril and oligomer conformers of amyloid-beta (Aβ) 42, which is a peptide of 42 amino acids related to the development of Alzheimer's disease. We find that both the Aβ42 fibrils and Aβ42 oligomers reduced the cell membrane roughness, but the effect of Aβ42 oligomers was faster and stronger than that of the fibrils. We also apply direct-current electric field (dcEF) stimulations on the cells. A dcEF of 300 mV/mm can increase the membrane roughness under the treatment of Aβ42. These results suggest that Aβ42 can decrease the membrane compliance of live neuroblastoma cells, and dcEFs may counteract this effect.

A layered modulation method for pixel matching in online phase measuring profilometry

NASA Astrophysics Data System (ADS)

Li, Hongru; Feng, Guoying; Bourgade, Thomas; Yang, Peng; Zhou, Shouhuan; Asundi, Anand

2016-10-01

An online phase measuring profilometry with new layered modulation method for pixel matching is presented. In this method and in contrast with previous modulation matching methods, the captured images are enhanced by Retinex theory for better modulation distribution, and all different layer modulation masks are fully used to determine the displacement of a rectilinear moving object. High, medium and low modulation masks are obtained by performing binary segmentation with iterative Otsu method. The final shifting pixels are calculated based on centroid concept, and after that the aligned fringe patterns can be extracted from each frame. After performing Stoilov algorithm and a series of subsequent operations, the object profile on a translation stage is reconstructed. All procedures are carried out automatically, without setting specific parameters in advance. Numerical simulations are detailed and experimental results verify the validity and feasibility of the proposed approach.

Robust dynamic 3-D measurements with motion-compensated phase-shifting profilometry

NASA Astrophysics Data System (ADS)

Feng, Shijie; Zuo, Chao; Tao, Tianyang; Hu, Yan; Zhang, Minliang; Chen, Qian; Gu, Guohua

2018-04-01

Phase-shifting profilometry (PSP) is a widely used approach to high-accuracy three-dimensional shape measurements. However, when it comes to moving objects, phase errors induced by the movement often result in severe artifacts even though a high-speed camera is in use. From our observations, there are three kinds of motion artifacts: motion ripples, motion-induced phase unwrapping errors, and motion outliers. We present a novel motion-compensated PSP to remove the artifacts for dynamic measurements of rigid objects. The phase error of motion ripples is analyzed for the N-step phase-shifting algorithm and is compensated using the statistical nature of the fringes. The phase unwrapping errors are corrected exploiting adjacent reliable pixels, and the outliers are removed by comparing the original phase map with a smoothed phase map. Compared with the three-step PSP, our method can improve the accuracy by more than 95% for objects in motion.

Remote Observing and Automatic FTP on Kitt Peak

NASA Astrophysics Data System (ADS)

Seaman, Rob; Bohannan, Bruce

As part of KPNO's Internet-based observing services we experimented with the publically available audio, video and whiteboard MBONE clients (vat, nv, wb and others) in both point-to-point and multicast modes. While bandwidth is always a constraint on the Internet, it is less of a constraint to operations than many might think. These experiments were part of two new Internet-based observing services offered to KPNO observers beginning with the Fall 1995 semester: a remote observing station and an automatic FTP data queue. The remote observing station seeks to duplicate the KPNO IRAF/ICE observing environment on a workstation at the observer's home institution. The automatic FTP queue is intended to support those observing programs that require quick transport of data back to the home institution, for instance, for near real time reductions to aid in observing tactics. We also discuss the early operational results of these services.

Variations in surface roughness of seven orthodontic archwires: an SEM-profilometry study

PubMed Central

Rakhshan, Vahid; Pousti, Maryam; Rahimi, Hajir; Shariati, Mahsa; Aghamohamadi, Bahareh

2012-01-01

Objective The purpose of this study was to evaluate the surface roughness (SR) of 2 types of orthodontic archwires made by 4 different manufacturers. Methods This in vitro experimental study was conducted on 35 specimens of 7 different orthodontic archwires, namely, 1 nickel-titanium (NiTi) archwire each from the manufacturers American Orthodontics, OrthoTechnology, All-Star Orthodontics, and Smart Technology, and 1 stainless steel (SS) archwire each from the manufacturers American Orthodontics, OrthoTechnology, and All-Star Orthodontics. After analyzing the composition of each wire by energy-dispersive X-ray analysis, the SR of each wire was determined by scanning electron microscopy (SEM) and surface profilometry. Data were analyzed using the Kruskal-Wallis and Mann-Whitney U tests (α < 0.05). Results The average SR of NiTi wires manufactured by Smart Technology, American Orthodontics, OrthoTechnology, and All-Star Orthodontics were 1,289 ± 915 A°, 1,378 ± 372 A°, 2,444 ± 369 A°, and 5,242 ± 2,832 A°, respectively. The average SR of SS wires manufactured by All-Star Orthodontics, OrthoTechnology, and American Orthodontics were 710 ± 210 A°, 1,831 ± 1,156 A°, and 4,018 ± 2,214 A°, respectively. Similar to the results of profilometry, the SEM images showed more defects and cracks on the SS wire made by American Orthodontics and the NiTi wire made by All-Star Orthodontics than others. Conclusions The NiTi wire manufactured by All-Star Orthodontics and the SS wire made by American Orthodontics were the roughest wires. PMID:23112943

Protocol for measurement of enamel loss from brushing with an anti-erosive toothpaste after an acidic episode.

PubMed

Dehghan, Mojdeh; Vieira Ozorio, Jose Estevam; Chanin, Simon; Tantbirojn, Daranee; Versluis, Antheunis; Garcia-Godoy, Franklin

2017-01-01

Tooth erosion from an acidic insult may be exacerbated by toothbrushing. The purposes of this study were to develop an in vitro methodology to measure enamel loss after brushing immediately following an acidic episode and to investigate the effect of brushing with an anti-erosive toothpaste. The null hypotheses tested were that tooth erosion after brushing with the toothpaste would not be different from brushing with water and that a 1-hour delay before brushing would not reduce tooth erosion. Forty bovine enamel slabs were embedded, polished, and subjected to baseline profilometry. Specimens were bathed in hydrochloric acid for 10 minutes to simulate stomach acid exposure before post-acid profilometry. Toothbrushing was then simulated with a cross-brushing machine and followed by postbrushing profilometry. Group 1 was brushed with water; group 2 was brushed with a 50:50 toothpaste-water slurry; and groups 3 and 4 were immersed in artificial saliva for 1 hour before brushing with water or the toothpaste slurry, respectively. The depth of enamel loss was analyzed and compared using 1-way analysis of variance and post hoc testing (α = 0.05). Greater enamel loss was measured in groups brushed with toothpaste than in groups brushed with water. One-hour immersion in artificial saliva significantly reduced enamel loss when teeth were brushed with water (group 3; P < 0.05) but not with toothpaste (group 4). This study established a protocol for measuring enamel loss resulting from erosion followed by toothbrush abrasion. The results confirmed the abrasive action of toothpaste on acid-softened enamel.

Super-sensitive two-wavelength fringe projection profilometry with 2-sensitivities temporal unwrapping

NASA Astrophysics Data System (ADS)

Servin, Manuel; Padilla, Moises; Garnica, Guillermo

2018-07-01

Since the early 1970s, optical two-wavelength phase-metrology (TWPM) has been used in a wide variety of experimental set ups. In TWPM one may compute the phase-sum and the phase-difference of two close phase measurements. Early TWPM optically computed the phase difference and phase sum by double exposure holography. However soon after, TWPM became almost synonymous to calculating the phase-difference only. The more sensitive phase-sum was largely forgotten. The standard application for phase-difference TWPM is to extend the phase measurement depth without phase-unwrapping for discontinuous phase-objects. This phase-difference, while non-wrapped, decreases however the signal-to-noise ratio (SNR) of the estimated phase. On the other hand, the phase-sum increases the phase sensitivity, and the SNR of the estimated phase. In spite of these two great advantages, the use of the phase-sum in TWPM has been almost ignored. In this paper we review and set the stage for digital TWPM for super-sensitive phase-sum estimation. This is coupled with two-sensitivity phase-unwrapping to obtain extended-range super-sensitive fringe-projection profilometry estimations. Here we mathematically prove, and experimentally show that using the phase-sum one obtains a huge increase in SNR with respect to using the phase-difference alone. The pioneer works on double exposure TWPM holography that uses the phase-difference and phase-sum are also properly acknowledged. Finally, two experimental results from fringe-projection profilometry that clearly show the huge SNR gain of the phase-sum, with respect to the phase-difference is now mathematically well established.

Is a sequence of tests during urethral pressure profilometry correlated with symptoms assessment in women?

PubMed

Valentini, Françoise A; Robain, Gilberte; Marti, Brigitte G

2012-01-01

Our purpose was, applying a strictly defined protocol for urethral profilometry, 1) to test the repeatability of same session rest maximum urethral closure pressure (MUCP) and 2) to search for correlation between women complaint and the changes in MUCP value (rest and dynamic tests). A population of 140 consecutive women referred for evaluation of lower urinary tract dysfunction was stratified in 4 groups according with the urinary symptoms: stress, urge, mixed incontinence and continent and in each group in 3 age groups (young, middle age and old). The sequence of tests recorded in supine position was: urethral pressure profile at rest bladder empty, after bladder filling at 250 mL (reference test), stress profile, fatigability (before (rest) and after 10 successive strong coughs), then in standing position. In all groups, there was no significant difference between the two MUCP values at rest bladder filled. In the three incontinent groups, MUCP was higher bladder empty than bladder filled (p < 0.05) except in the young sub-group. Stress incontinence led to significant decrease of MUCP during dynamic tests in the young group. MUCP was not modified after fatigability test in women with urge complaint whatever age. When recorded following a strictly defined protocol, MUCP at rest bladder filled has a good repeatability in individual. However a complex sequence of tests during urethral pressure profilometry remains discussed in middle-age and old age-groups, it allows specifying the stress component of incontinence in young women and the urgency component in all age-groups.

Characterization of Conventional and High-Translucency Y-TZP Dental Ceramics Submitted to Air Abrasion.

PubMed

Tostes, Bhenya Ottoni; Guimarães, Renato Bastos; Noronha-Filho, Jaime Dutra; Botelho, Glauco Dos Santos; Guimarães, José Guilherme Antunes; Silva, Eduardo Moreira da

2017-01-01

This study evaluated the effect of air-abrasion on t®m phase transformation, roughness, topography and the elemental composition of three Y-TZP (Yttria-stabilized tetragonal zirconia polycrystal) dental ceramics: two conventional (Lava Frame and IPS ZirCad) and one with high-translucency (Lava Plus). Plates obtained from sintered blocks of each ceramic were divided into four groups: AS (as-sintered); 30 (air-abrasion with 30 mm Si-coated Al2O3 particles); 50 (air-abrasion with 50 mm Al2O3 particles) and 150 (air-abrasion with 150 mm Al2O3 particles). After the treatments, the plates were submitted to X-ray diffractometry; 3-D profilometry and SEM/EDS. The AS surfaces were composed of Zr and t phases. All treatments produced t®m phase transformation in the ceramics. The diameter of air-abrasion particles influenced the roughness (150>50>30>AS) and the topography. SEM analysis showed that the three treatments produced groove-shaped microretentions on the ceramic surfaces, which increased with the diameter of air-abrasion particles. EDS showed a decrease in Zr content along with the emergence of O and Al elements after air-abrasion. Presence of Si was also detected on the plates air-abraded with 30 mm Si-coated Al2O3 particles. It was concluded that irrespective of the type and diameter of the particles, air-abrasion produced t®m phase transformation, increased the roughness and changed the elemental composition of the three Y-TZP dental ceramics. Lava Plus also behaved similarly to the conventional Y-TZP ceramics, indicating that this high translucency ceramic could be more suitable to build monolithic ceramic restorations in the aesthetic restorative dentistry field.

Characterization of PLD grown WO3 thin films for gas sensing

NASA Astrophysics Data System (ADS)

Boyadjiev, Stefan I.; Georgieva, Velichka; Stefan, Nicolaie; Stan, George E.; Mihailescu, Natalia; Visan, Anita; Mihailescu, Ion N.; Besleaga, Cristina; Szilágyi, Imre M.

2017-09-01

Tungsten trioxide (WO3) thin films were grown by pulsed laser deposition (PLD) with the aim to be applied in gas sensors. The films were studied by atomic force microscopy (AFM), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy and profilometry. To study the gas sensing behavior of these WO3 films, they were deposited on quartz resonators and the quartz crystal microbalance (QCM) method was applied to analyze their gas sensitivity. Synthesis of tetragonal-WO3 films starting from a target with predominantly monoclinic WO3 phase was observed. The films deposited at 300 °C presented a surface topology favorable for the sorption properties, consisting of a film matrix with protruding craters/cavities. QCM prototype sensors with such films were tested for NO2 sensing. The PLD grown WO3 thin films show good sensitivity and fast reaction at room temperature, even in as-deposited state. With the presented technology, the manufacturing of QCM gas sensors is simple, fast and cost-effective, and it is also suitable for energy-effective portable equipment for on-line monitoring of environmental changes.

The GP tests of competence assessment: which part best predicts fitness to practise decisions?

PubMed

Jayaweera, Hirosha Keshani; Potts, Henry W W; Keshwani, Karim; Valerio, Chris; Baker, Magdalen; Mehdizadeh, Leila; Sturrock, Alison

2018-01-02

The General Medical Council (GMC) conducts Tests of Competence (ToC) for doctors referred for Fitness to Practise (FtP) issues. GPs take a single best answer knowledge test, an Objective Structured Clinical Examination (OSCE), and a Simulated Surgery (SimSurg) assessment which is a simulated GP consultation. The aim of this study was to examine the similarities between OSCEs and SimSurg to determine whether each assessment contributed something unique to GP ToCs. A mixed methods approach was used. Data were collated on 153 GPs who were required to undertake a ToC as a part of being investigated for FtP issues between February 2010 and October 2016. Using correlation analysis, we examined to what degree performance on the knowledge test, OSCE, and SimSurg related to case examiner recommendations and FtP outcomes, including the unique predictive power of these three assessments. The outcome measures were case examiner recommendations (i) not fit to practise; ii) fit to practise on a limited basis; or iii) fit to practise) as well as FtP outcomes (i) erased/removed from the register; ii) having restrictions/conditions; or iii) be in good standing). For the qualitative component, 45 GP assessors were asked to rate whether they assess the same competencies and which assessment provides better feedback about candidates. There was significant overlap between OSCEs and SimSurg, p < 0.001. SimSurg had additional predictive power in the presence of OSCEs and the knowledge test (p = 0.030) in distinguishing doctors from different FtP categories, while OSCEs did not (p = 0.080). Both the OSCEs (p = 0.004) and SimSurg (p < 0.001) had significant negative correlations with case examiner recommendations when accounting for the effects of the other two assessments. Inductive thematic analysis of the responses to the questionnaire showed that assessors perceived OSCEs to be better suited to target specific knowledge and skills. SimSurg was thought to produce a more global picture as the scenarios more accurately portray a patient consultation. While all three assessments are strong predictors of both case examiner recommendations and FtP outcomes, our findings suggest that the efficiency of GP ToCs can be improved by removing some of this overlapping content.

The human-induced pluripotent stem cell initiative—data resources for cellular genetics

PubMed Central

Streeter, Ian; Harrison, Peter W.; Faulconbridge, Adam; Flicek, Paul; Parkinson, Helen; Clarke, Laura

2017-01-01

The Human Induced Pluripotent Stem Cell Initiative (HipSci) isf establishing a large catalogue of human iPSC lines, arguably the most well characterized collection to date. The HipSci portal enables researchers to choose the right cell line for their experiment, and makes HipSci's rich catalogue of assay data easy to discover and reuse. Each cell line has genomic, transcriptomic, proteomic and cellular phenotyping data. Data are deposited in the appropriate EMBL-EBI archives, including the European Nucleotide Archive (ENA), European Genome-phenome Archive (EGA), ArrayExpress and PRoteomics IDEntifications (PRIDE) databases. The project will make 500 cell lines from healthy individuals, and from 150 patients with rare genetic diseases; these will be available through the European Collection of Authenticated Cell Cultures (ECACC). As of August 2016, 238 cell lines are available for purchase. Project data is presented through the HipSci data portal (http://www.hipsci.org/lines) and is downloadable from the associated FTP site (ftp://ftp.hipsci.ebi.ac.uk/vol1/ftp). The data portal presents a summary matrix of the HipSci cell lines, showing available data types. Each line has its own page containing descriptive metadata, quality information, and links to archived assay data. Analysis results are also available in a Track Hub, allowing visualization in the context of public genomic annotations (http://www.hipsci.org/data/trackhubs). PMID:27733501

"We want the world and we want it now": Materialism, time perspectives and problem spending tendency of Chinese.

PubMed

Ku, Lisbeth; Wu, Anise M S; Lao, Angie K P; Lam, Kerwin I N

2016-10-06

Chinese consumers' spending has been expanding rapidly in the past decade, and along with it household and credit card debt. The present research collected evidence to triangulate the contention that materialism is positively related with Chinese's problem spending tendency (PST), and that present-time-perspective (PTP) and future-time perspectives (FTP) interact systematically with materialism to affect PST. A survey of the general population in Macao, China (Study 1; N = 239) confirmed that materialism was positively correlated with PST. An interaction between materialism and PTP intensified the relationship, whereas an interaction with FTP weakened the relationship. Another survey with a sample of university students (Study 2; N = 223) again found positive relationships among PST, materialism, and PTP, as measured by temporal discount rate. But further exploration showed that PST was only related with temporal discounting among high materialists, but not among low materialists. Study 3 experimentally examined the causal effects of materialism and FTP on PST. When being primed of an orientation towards materialism (n = 33), the participants' planned consumption doubled that of the control group (n = 31). A FTP prime interacted with materialism prime and put a "damper" on participants' planned spending (n = 29), compared to their counterparts who were not primed of such a time perspective. © 2016 International Union of Psychological Science.

On transformation between international celestial and terrestrial reference systems

NASA Astrophysics Data System (ADS)

Bretagnon, P.; Brumberg, V. A.

2003-09-01

Based on the current IAU hierarchy of the relativistic reference systems, practical formulae for the transformation between barycentric (BCRS) and geocentric (GCRS) celestial reference systems are derived. BCRS is used to refer to ICRS, International Celestial Reference System. This transformation is given in four versions, dependent on the time arguments used for BCRS (TCB or TDB) and for GCRS (TCG or TT). All quantities involved in these formulae have been tabulated with the use of the VSOP theories (IMCCE theories of motion of the major planets). In particular, these formulae may be applied to account for the indirect relativistic third-body perturbations in motion of Earth's satellites and Earth's rotation problem. We propose to use the SMART theory (IMCCE theory of Earth's rotation) in constructing the Newtonian three-dimensional spatial rotation transformation between GCRS and ITRS, the International Terrestrial Reference System. This transformation is compared with two other versions involving extra angular variables currently used by IERS, the International Earth Rotation Service. It is shown that the comparison of these three forms of the same transformation may be greatly simplified by using the proposed composite rotation formula. Tables 1-20 of Appendix B containing the initial terms of the VSOP-based series for the BCRS<->GCRS transformation are only available in electronic form at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsweb.u-strasbg.fr/cgi-bin/qcat?J/A+A/408/387. The work on ICRS<->GCRS transformation with the use of VSOP theories was done in February-March 2002 during the stay of the second author in IMCCE. The authors hoped to complete the second part concerning GCRS<->ITRS transformation with the use of SMART theory in September 2002 during the visit of the first author to IAA. The grave disease of Pierre Bretagnon which tragically resulted in his death on November 17, 2002, did not permit us to complete this work. The aim to improve SMART theory by taking into account the indirect relativistic third-body perturbations as indicated in the paper also remains unachieved. The second author is publishing this paper in memoriam of

Absorbed radiation dosimetry of the D3-specific PET radioligand [18F]FluorTriopride estimated using rodent and nonhuman primate

PubMed Central

Laforest, Richard; Karimi, Morvarid; Moerlein, Stephen M; Xu, Jinbin; Flores, Hubert P; Bognar, Christopher; Li, Aixiao; Mach, Robert H; Perlmutter, Joel S; Tu, Zhude

2016-01-01

[18F]FluorTriopride ([18F]FTP) is a dopamine D3-receptor preferring radioligand with potential for investigation of neuropsychiatric disorders including Parkinson disease, dystonia and schizophrenia. Here we estimate human radiation dosimetry for [18F]FTP based on the ex-vivo biodistribution in rodents and in vivo distribution in nonhuman primates. Biodistribution data were generated using male and female Sprague-Dawley rats injected with ~370 KBq of [18F]FTP and euthanized at 5, 30, 60, 120, and 240 min. Organs of interest were dissected, weighed and assayed for radioactivity content. PET imaging studies were performed in two male and one female macaque fascicularis administered 143-190 MBq of [18F]FTP and scanned whole-body in sequential sections. Organ residence times were calculated based on organ time activity curves (TAC) created from regions of Interest. OLINDA/EXM 1.1 was used to estimate human radiation dosimetry based on scaled organ residence times. In the rodent, the highest absorbed radiation dose was the upper large intestines (0.32-0.49 mGy/MBq), with an effective dose of 0.07 mSv/MBq in males and 0.1 mSv/MBq in females. For the nonhuman primate, however, the gallbladder wall was the critical organ (1.81 mGy/MBq), and the effective dose was 0.02 mSv/MBq. The species discrepancy in dosimetry estimates for [18F]FTP based on rat and primate data can be attributed to the slower transit of tracer through the hepatobiliary track of the primate compared to the rat, which lacks a gallbladder. Out findings demonstrate that the nonhuman primate model is more appropriate model for estimating human absorbed radiation dosimetry when hepatobiliary excretion plays a major role in radiotracer elimination. PMID:28078183

A classification and evaluation of data movement technologies for the delivery of highly voluminous scientific data products

NASA Technical Reports Server (NTRS)

Mattmann, Chris A.; Kelly, Sean; Crichton, Daniel J.; Hughes, J. Steven; Hardman, Sean; Ramirez, Paul; Joyner, Ron

2006-01-01

In this paper, we present a preliminary study of several different electronic data movement technologies. We detail our approach to classifying the technologies included in our study and present the preliminary results of some initial performance benchmarking. Our studies suggest that highly parallel TCP/IP streaming technologies, such as GridFTP and bbFTP, outperform commercial and open-source UDP-bursting technologies in several of the key data movement dimensions that we studied.

GRBase, a new gene regulation data base available by anonymous ftp.

PubMed Central

Collier, B; Danielsen, M

1994-01-01

The Gene Regulation Database (GRBase) is a compendium of information on the structure and function of proteins involved in the control of gene expression in eukaryotes. These proteins include transcription factors, proteins involved in signal transduction, and receptors. The database can be obtained by FTP in Filemaker Pro, text, and postscript formats. The database will be expanded in the coming year to include reviews on families of proteins involved in gene regulation and to allow online searching. PMID:7937071

Inhibitory capacity of Rhus coriaria L. extract and its major component methyl gallate on Streptococcus mutans biofilm formation by optical profilometry: Potential applications for oral health.

PubMed

Kacergius, Tomas; Abu-Lafi, Saleh; Kirkliauskiene, Agne; Gabe, Vika; Adawi, Azmi; Rayan, Mahmoud; Qutob, Mutaz; Stukas, Rimantas; Utkus, Algirdas; Zeidan, Mouhammad; Rayan, Anwar

2017-07-01

Streptococcus mutans (S. mutans) bacterium is the most well recognized pathogen involved in pathogenesis of dental caries. Its virulence arises from its ability to produce a biofilm and acidogenicity, causing tooth decay. Discovery of natural products capable to inhibit biofilm formation is of high importance for developing health care products. To the best of our knowledge, in all previous scientific reports, a colorimetric assay was applied to test the effect of sumac and methyl gallate (MG) on S. mutans adherence. Quantitative assessment of the developed biofilm should be further performed by applying an optical profilometry assay, and by testing the effect on both surface roughness and thickness parameters of the biofilm. To the best of our knowledge, this is the first study to report the effect of sumac extract and its constituent MG on biofilm formation using an optical profilometry assay. Testing antibacterial activity of the sumac extract and its fractions revealed that MG is the most bioactive component against S. mutans bacteria. It reduced S. mutans biofilm biomass on the polystyrene surface by 68‑93%, whereas 1 mg/ml MG was able to decrease the biofilm roughness and thickness on the glass surface by 99%. MG also prevented a decrease in pH level by 97%. These bioactivities of MG occurred in a dose‑dependent manner and were significant vs. untreated bacteria. The findings are important for the development of novel pharmaceuticals and formulations of natural products and extracts that possess anti‑biofilm activities with primary applications for oral health, and in a broader context, for the treatment of various bacterial infections.

Data Transfer Efficiency Over Satellite Circuits Using a Multi-Socket Extension to the File Transfer Protocol (FTP)

NASA Technical Reports Server (NTRS)

Allman, Mark; Ostermann, Shawn; Kruse, Hans

1996-01-01

In several experiments using NASA's Advanced Communications Technology Satellite (ACTS), investigators have reported disappointing throughput using the transmission control protocol/Internet protocol (TCP/IP) protocol suite over 1.536Mbit/sec (T1) satellite circuits. A detailed analysis of file transfer protocol (FTP) file transfers reveals that both the TCP window size and the TCP 'slow starter' algorithm contribute to the observed limits in throughput. In this paper we summarize the experimental and and theoretical analysis of the throughput limit imposed by TCP on the satellite circuit. We then discuss in detail the implementation of a multi-socket FTP, XFTP client and server. XFTP has been tested using the ACTS system. Finally, we discuss a preliminary set of tests on a link with non-zero bit error rates. XFTP shows promising performance under these conditions, suggesting the possibility that a multi-socket application may be less effected by bit errors than a single, large-window TCP connection.

Study of a unified hardware and software fault-tolerant architecture

NASA Technical Reports Server (NTRS)

Lala, Jaynarayan; Alger, Linda; Friend, Steven; Greeley, Gregory; Sacco, Stephen; Adams, Stuart

1989-01-01

A unified architectural concept, called the Fault Tolerant Processor Attached Processor (FTP-AP), that can tolerate hardware as well as software faults is proposed for applications requiring ultrareliable computation capability. An emulation of the FTP-AP architecture, consisting of a breadboard Motorola 68010-based quadruply redundant Fault Tolerant Processor, four VAX 750s as attached processors, and four versions of a transport aircraft yaw damper control law, is used as a testbed in the AIRLAB to examine a number of critical issues. Solutions of several basic problems associated with N-Version software are proposed and implemented on the testbed. This includes a confidence voter to resolve coincident errors in N-Version software. A reliability model of N-Version software that is based upon the recent understanding of software failure mechanisms is also developed. The basic FTP-AP architectural concept appears suitable for hosting N-Version application software while at the same time tolerating hardware failures. Architectural enhancements for greater efficiency, software reliability modeling, and N-Version issues that merit further research are identified.

Socioeconomic, psychological and demographic determinants of Australian baby boomers' financial planning for retirement.

PubMed

Noone, Jack; O'Loughlin, Kate; Kendig, Hal

2012-09-01

Research from around the Western World has shown that psychological, socioeconomic and demographic factors can influence levels of financial planning. This study aims to determine how these factors interrelate to predict planning outcomes. Data from the Ageing Baby Boomers in Australia Study were used to examine the effects of multiple factors on financial planning for 709 employed Australians nearing retirement. The results showed that higher income, future time perspective (FTP) and financial knowledge independently predicted levels of retirement planning. The effects of FTP and financial knowledge on financial planning were consistent across levels of socioeconomic status. While similar issues in financial planning appeared across socioeconomic status, a 'one size fits all' approach to retirement policy may not be effective. Instead, policy should be targeted towards the diverse needs of different groups. Raising public awareness of FTP and financial knowledge may provide a useful starting point. © 2012 The Authors. Australasian Journal on Ageing © 2012 ACOTA.

Delay of Gratification, Delay Discounting and their Associations with Age, Episodic Future Thinking, and Future Time Perspective.

PubMed

Göllner, Lars M; Ballhausen, Nicola; Kliegel, Matthias; Forstmeier, Simon

2017-01-01

The delay of gratification (DoG) in children is widely investigated with an experimental procedure originally called the "marshmallow test," whereas the studies on self-regulation (SR) in adolescents and adults usually use self-report questionnaires. Delay discounting (DD) measures simplify the DoG procedure and focus on monetary rewards. The aim of this study was to investigate age differences in DoG and DD from childhood to old age using a test that is suitable for both children and adults. Furthermore, investigations were conducted on the association between DoG/DD and two future orientation constructs [future time perspective (FTP) and episodic future thinking (EFT)] as well as age differences in these constructs. Participants from five age groups (9-14, 18-25, 35-55, 65-80, 80+) participated in the study ( N = 96). While we found no age difference for DoG, DD was the lowest [i.e., self-control (SC) was the highest] in young/middle adults; however, it was the highest (i.e., SC was the lowest) in children and old/oldest adults. Furthermore, we found significant age differences for DD and FTP. As predicted, there were strong correlations between DoG and FTP and between DD and FTP, but not between DoG/DD and EFT. These results indicate that age differences in SR vary across the measures used. Individuals who generally think and act in a future-oriented manner have a stronger ability to delay gratification.

Novel Chemokine-Based Immunotoxins for Potent and Selective Targeting of Cytomegalovirus Infected Cells

PubMed Central

Spiess, Katja; Jeppesen, Mads G.; Malmgaard-Clausen, Mikkel; Krzywkowski, Karen

2017-01-01

Immunotoxins as antiviral therapeutics are largely unexplored but have promising prospective due to their high selectivity potential and their unparalleled efficiency. One recent example targeted the virus-encoded G protein-coupled receptor US28 as a strategy for specific and efficient treatment of human cytomegalovirus (HCMV) infections. US28 is expressed on virus-infected cells and scavenge chemokines by rapid internalization. The chemokine-based fusion-toxin protein (FTP) consisted of a variant (F49A) of CX3CL1 specifically targeting US28 linked to the catalytic domain of Pseudomonas exotoxin A (PE). Here, we systematically seek to improve F49A-FTP by modifications in its three structural domains; we generated variants with (1) altered chemokine sequence (K14A, F49L, and F49E), (2) shortened and elongated linker region, and (3) modified toxin domain. Only F49L-FTP displayed higher selectivity in its binding to US28 versus CX3CR1, the endogenous receptor for CX3CL1, but this was not matched by a more selective killing of US28-expressing cells. A longer linker and different toxin variants decreased US28 affinity and selective killing. Thereby, F49A-FTP represents the best candidate for HCMV treatment. Many viruses encode internalizing receptors suggesting that not only HCMV but also, for instance, Epstein-Barr virus and Kaposi's sarcoma-associated herpesvirus may be targeted by FTPs. PMID:28251165

The human-induced pluripotent stem cell initiative-data resources for cellular genetics.

PubMed

Streeter, Ian; Harrison, Peter W; Faulconbridge, Adam; Flicek, Paul; Parkinson, Helen; Clarke, Laura

2017-01-04

The Human Induced Pluripotent Stem Cell Initiative (HipSci) isf establishing a large catalogue of human iPSC lines, arguably the most well characterized collection to date. The HipSci portal enables researchers to choose the right cell line for their experiment, and makes HipSci's rich catalogue of assay data easy to discover and reuse. Each cell line has genomic, transcriptomic, proteomic and cellular phenotyping data. Data are deposited in the appropriate EMBL-EBI archives, including the European Nucleotide Archive (ENA), European Genome-phenome Archive (EGA), ArrayExpress and PRoteomics IDEntifications (PRIDE) databases. The project will make 500 cell lines from healthy individuals, and from 150 patients with rare genetic diseases; these will be available through the European Collection of Authenticated Cell Cultures (ECACC). As of August 2016, 238 cell lines are available for purchase. Project data is presented through the HipSci data portal (http://www.hipsci.org/lines) and is downloadable from the associated FTP site (ftp://ftp.hipsci.ebi.ac.uk/vol1/ftp). The data portal presents a summary matrix of the HipSci cell lines, showing available data types. Each line has its own page containing descriptive metadata, quality information, and links to archived assay data. Analysis results are also available in a Track Hub, allowing visualization in the context of public genomic annotations (http://www.hipsci.org/data/trackhubs). © The Author(s) 2016. Published by Oxford University Press on behalf of Nucleic Acids Research.

Novel Chemokine-Based Immunotoxins for Potent and Selective Targeting of Cytomegalovirus Infected Cells.

PubMed

Spiess, Katja; Jeppesen, Mads G; Malmgaard-Clausen, Mikkel; Krzywkowski, Karen; Kledal, Thomas N; Rosenkilde, Mette M

2017-01-01

Immunotoxins as antiviral therapeutics are largely unexplored but have promising prospective due to their high selectivity potential and their unparalleled efficiency. One recent example targeted the virus-encoded G protein-coupled receptor US28 as a strategy for specific and efficient treatment of human cytomegalovirus (HCMV) infections. US28 is expressed on virus-infected cells and scavenge chemokines by rapid internalization. The chemokine-based fusion-toxin protein (FTP) consisted of a variant (F49A) of CX 3 CL1 specifically targeting US28 linked to the catalytic domain of Pseudomonas exotoxin A (PE). Here, we systematically seek to improve F49A-FTP by modifications in its three structural domains; we generated variants with (1) altered chemokine sequence (K14A, F49L, and F49E), (2) shortened and elongated linker region, and (3) modified toxin domain. Only F49L-FTP displayed higher selectivity in its binding to US28 versus CX 3 CR1, the endogenous receptor for CX 3 CL1, but this was not matched by a more selective killing of US28-expressing cells. A longer linker and different toxin variants decreased US28 affinity and selective killing. Thereby, F49A-FTP represents the best candidate for HCMV treatment. Many viruses encode internalizing receptors suggesting that not only HCMV but also, for instance, Epstein-Barr virus and Kaposi's sarcoma-associated herpesvirus may be targeted by FTPs.

Nonlinear gamma correction via normed bicoherence minimization in optical fringe projection metrology

NASA Astrophysics Data System (ADS)

Kamagara, Abel; Wang, Xiangzhao; Li, Sikun

2018-03-01

We propose a method to compensate for the projector intensity nonlinearity induced by gamma effect in three-dimensional (3-D) fringe projection metrology by extending high-order spectra analysis and bispectral norm minimization to digital sinusoidal fringe pattern analysis. The bispectrum estimate allows extraction of vital signal information features such as spectral component correlation relationships in fringe pattern images. Our approach exploits the fact that gamma introduces high-order harmonic correlations in the affected fringe pattern image. Estimation and compensation of projector nonlinearity is realized by detecting and minimizing the normed bispectral coherence of these correlations. The proposed technique does not require calibration information and technical knowledge or specification of fringe projection unit. This is promising for developing a modular and calibration-invariant model for intensity nonlinear gamma compensation in digital fringe pattern projection profilometry. Experimental and numerical simulation results demonstrate this method to be efficient and effective in improving the phase measuring accuracies with phase-shifting fringe pattern projection profilometry.

Reconstruction method for fringe projection profilometry based on light beams.

PubMed

Li, Xuexing; Zhang, Zhijiang; Yang, Chen

2016-12-01

A novel reconstruction method for fringe projection profilometry, based on light beams, is proposed and verified by experiments. Commonly used calibration techniques require the parameters of projector calibration or the reference planes placed in many known positions. Obviously, introducing the projector calibration can reduce the accuracy of the reconstruction result, and setting the reference planes to many known positions is a time-consuming process. Therefore, in this paper, a reconstruction method without projector's parameters is proposed and only two reference planes are introduced. A series of light beams determined by the subpixel point-to-point map on the two reference planes combined with their reflected light beams determined by the camera model are used to calculate the 3D coordinates of reconstruction points. Furthermore, the bundle adjustment strategy and the complementary gray-code phase-shifting method are utilized to ensure the accuracy and stability. Qualitative and quantitative comparisons as well as experimental tests demonstrate the performance of our proposed approach, and the measurement accuracy can reach about 0.0454 mm.

Novel 3-D free-form surface profilometry for reverse engineering

NASA Astrophysics Data System (ADS)

Chen, Liang-Chia; Huang, Zhi-Xue

2005-01-01

This article proposes an innovative 3-D surface contouring approach for automatic and accurate free-form surface reconstruction using a sensor integration concept. The study addresses a critical problem in accurate measurement of free-form surfaces by developing an automatic reconstruction approach. Unacceptable measuring accuracy issues are mainly due to the errors arising from the use of inadequate measuring strategies, ending up with inaccurate digitised data and costly post-data processing in Reverse Engineering (RE). This article is thus aimed to develop automatic digitising strategies for ensuring surface reconstruction efficiency, as well as accuracy. The developed approach consists of two main stages, namely the rapid shape identification (RSI) and the automated laser scanning (ALS) for completing 3-D surface profilometry. This developed approach effectively utilises the advantages of on-line geometric information to evaluate the degree of satisfaction of user-defined digitising accuracy under a triangular topological patch. An industrial case study was used to attest the feasibility of the approach.

The study of cyclododecane as a temporary coating for marble by NMR profilometry and FTIR reflectance spectroscopies

NASA Astrophysics Data System (ADS)

Anselmi, C.; Presciutti, F.; Doherty, B.; Brunetti, B. G.; Sgamellotti, A.; Miliani, C.

2011-07-01

This contribution focuses on an analytical evaluation of the use of cyclododecane (CDD) (C12H24) as a temporary protective coating for non-porous stone materials of cultural heritage interest. A facile solvent spray application technique for the production of an adherent continuous film has been assessed. The criterion for monitoring the sublimation of the cyclododecane film on marble has been established through the use of non-invasive analytical techniques so as to avoid any interaction with the process under study, where results serve to integrate and enhance knowledge into the use of cyclododecane in this discipline. Research is directed towards testing the applicability of portable infrared reflectance spectroscopy and nuclear magnetic resonance profilometry systems to follow the in-situ behavior of temporary consolidants. In particular, the coupling of two spectroscopic techniques such as IR and NMR has been possible, enabling the descriptions of both the formation of the film and its kinetics of sublimation.

Dual-sensitivity profilometry with defocused projection of binary fringes.

PubMed

Garnica, G; Padilla, M; Servin, M

2017-10-01

A dual-sensitivity profilometry technique based on defocused projection of binary fringes is presented. Here, two sets of fringe patterns with a sinusoidal profile are produced by applying the same analog low-pass filter (projector defocusing) to binary fringes with a high- and low-frequency spatial carrier. The high-frequency fringes have a binary square-wave profile, while the low-frequency binary fringes are produced with error-diffusion dithering. The binary nature of the binary fringes removes the need for calibration of the projector's nonlinear gamma. Working with high-frequency carrier fringes, we obtain a high-quality wrapped phase. On the other hand, working with low-frequency carrier fringes we found a lower-quality, nonwrapped phase map. The nonwrapped estimation is used as stepping stone for dual-sensitivity temporal phase unwrapping, extending the applicability of the technique to discontinuous (piecewise continuous) surfaces. We are proposing a single defocusing level for faster high- and low-frequency fringe data acquisition. The proposed technique is validated with experimental results.

New Technology-Large-Area Three- Dimensional Surface Profiling Using Only Focused Air-Coupled Ultrasound-Given 1999 R&D 100 Award

NASA Technical Reports Server (NTRS)

Roth, Don J.; Kautz, Harold E.; Abel, Phillip B.; Whalen, Mike F.; Hendricks, J. Lynne; Bodis, James R.

2000-01-01

Surface topography, which significantly affects the performance of many industrial components, is normally measured with diamond-tip profilometry over small areas or with optical scattering methods over larger areas. To develop air-coupled surface profilometry, the NASA Glenn Research Center at Lewis Field initiated a Space Act Agreement with Sonix, Inc., through two Glenn programs, the Advanced High Temperature Engine Materials Program (HITEMP) and COMMTECH. The work resulted in quantitative surface topography profiles obtained using only high-frequency, focused ultrasonic pulses in air. The method is nondestructive, noninvasive, and noncontact, and it does not require light-reflective surfaces. Air surface profiling may be desirable when diamond-tip or laserbased methods are impractical, such as over large areas, when a significant depth range is required, or for curved surfaces. When the configuration is optimized, the method is reasonably rapid and all the quantitative analysis facilities are online, including two- and three-dimensional visualization, extreme value filtering (for faulty data), and leveling.

[Nondestructive Evaluation (NDE) Capabilities

NASA Technical Reports Server (NTRS)

Born, Martin

2010-01-01

These poster boards display the United Space Alliance's (USA) systems and equipment used for Nondestructive Evaluation. These include: (1) the Robotic Inspection Facility, (2) CAT-Scan and Laminography, (3) Laser Surface Profilometry, (4) Remote Eddy Current, (5) Ultrasonic Phased Array, (7) Infrared Flash Thermography, and (8) Backscatter X-Ray (BSX)

Adding tools to the open source toolbox: The Internet

NASA Technical Reports Server (NTRS)

Porth, Tricia

1994-01-01

The Internet offers researchers additional sources of information not easily available from traditional sources such as print volumes or commercial data bases. Internet tools such as e-mail and file transfer protocol (ftp) speed up the way researchers communicate and transmit data. Mosaic, one of the newest additions to the Internet toolbox, allows users to combine tools such as ftp, gopher, wide area information server, and the world wide web with multimedia capabilities. Mosaic has quickly become a popular means of making information available on the Internet because it is versatile and easily customizable.

Reply to Comment on "Fringe projection profilometry with nonparallel illumination: a least-squares approach"

NASA Astrophysics Data System (ADS)

Chen, Lujie; Quan, Chenggen

2006-07-01

We have confirmed that a mathematical expression in our previous Letter [Chen and Quan, Opt. Lett.30, 2101 (2005)] should be modified. The modification, however, does not affect the validity of the method reported, the results obtained and the subsequent conclusions made.

40-in. OMS Kevlar(Registered Trademark) COPV S/N 007 Stress Rupture Test NDE

NASA Technical Reports Server (NTRS)

Saulsberry, Regor; Greene, Nate; Forth, Scott; Leifeste, Mark; Gallus, Tim; Yoder, Tommy; Keddy, Chris; Mandaras, Eric; Wincheski, Buzz; Williams, Philip;

Fitness-to-practice concerns in rural undergraduate medical education: a qualitative study.

PubMed

Snow, Pamela Claire; Harvey, Pamela Jane; Cocking, Kylie Lynette

2014-09-19

Since July 2010, new reporting requirements have applied to registered Australian health practitioners who have a reasonable belief that a practitioner or student (of any registered discipline) is exhibiting "notifiable conduct". A study of healthcare complaints reported that a small number of practitioners are over-represented in the majority of formal complaints brought against doctors. The impetus for conducting this research was a recognition that identifying and responding to particular behaviours early may prevent issues requiring mandatory reporting later on. As a first step, a better understanding of how fitness-to-practice (FTP) concerns are viewed was sought from stakeholders in a rural medical school. This qualitative project used purposive and snowballing sampling. Thirteen participants from an Australian rural medical school were interviewed for the study about FTP concerns. Seven were university staff, including clinical educators, program co-ordinators and academic faculty. Six were medical students in the middle of their final year. Their de-identified interview transcripts were independently coded into themes and emergent data categories were refined through comparative analysis between the authors. Data collection ceased after theoretical saturation was achieved. Although students and faculty staff responded similarly in their recognition of FTP concerns, they varied in their assessment of their frequency, with students indicating that concerns were rare. Students and staff expressed reluctance to formally report students or colleagues with FTP concerns because of the complexity and uncertainty of medical practice. Both groups considered early recognition of problems and implementation of supportive mechanisms as important, but students generally did not want to contact the university about concerns for fear of stigmatisation. Education providers need to have clear processes for identifying and responding to FTP concerns in the pre-service years of medical training. Importantly, students need to feel that they can seek help for their own concerns and not be stigmatised in doing so. This is a difficult challenge in a profession that has a perceived culture of strength and a traditional hierarchy. Rural medical schools, with their smaller student groups, are well positioned for early response to issues of concern.

Infrared study of transitional disks in Ophiuchus with Herschel

NASA Astrophysics Data System (ADS)

Rebollido, Isabel; Merín, Bruno; Ribas, Álvaro; Bustamante, Ignacio; Bouy, Hervé; Riviere-Marichalar, Pablo; Prusti, Timo; Pilbratt, Göran L.; André, Philippe; Ábrahám, Péter

2015-09-01

Context. Observations of nearby star-forming regions with the Herschel Space Observatory complement our view of the protoplanetary disks in Ophiuchus with information about the outer disks. Aims: The main goal of this project is to provide new far-infrared fluxes for the known disks in the core region of Ophiuchus and to identify potential transitional disks using data from Herschel. Methods: We obtained PACS and SPIRE photometry of previously spectroscopically confirmed young stellar objects (YSO) in the region and analysed their spectral energy distributions. Results: From an initial sample of 261 objects with spectral types in Ophiuchus, we detect 49 disks in at least one Herschel band. We provide new far-infrared fluxes for these objects. One of them is clearly a new transitional disk candidate. Conclusions: The data from Herschel Space Observatory provides fluxes that complement previous infrared data and that we use to identify a new transitional disk candidate. Herschel is an ESA space observatory with science instruments provided by European-led Principal Investigator consortia and with important participation from NASA.Final reduced Herschel maps are only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (ftp://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/581/A30Appendix A is available in electronic form at http://www.aanda.orgAll tables are also available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (ftp://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/581/A30

Clinical predictors of effective continuous positive airway pressure in patients with obstructive sleep apnea/hypopnea syndrome.

PubMed

Lai, Chi-Chih; Friedman, Michael; Lin, Hsin-Ching; Wang, Pa-Chun; Hwang, Michelle S; Hsu, Cheng-Ming; Lin, Meng-Chih; Chin, Chien-Hung

2015-08-01

To identify standard clinical parameters that may predict the optimal level of continuous positive airway pressure (CPAP) in adult patients with obstructive sleep apnea/hypopnea syndrome (OSAHS). This is a retrospective study in a tertiary academic medical center that included 129 adult patients (117 males and 12 females) with OSAHS confirmed by diagnostic polysomnography (PSG). All OSAHS patients underwent successful full-night manual titration to determine the optimal CPAP pressure level for OSAHS treatment. The PSG parameters and completed physical examination, including body mass index, tonsil size grading, modified Mallampati grade (also known as updated Friedman's tongue position [uFTP]), uvular length, neck circumference, waist circumference, hip circumference, thyroid-mental distance, and hyoid-mental distance (HMD) were recorded. When the physical examination variables and OSAHS disease were correlated singly with the optimal CPAP pressure, we found that uFTP, HMD, and apnea/hypopnea index (AHI) were reliable predictors of CPAP pressures (P = .013, P = .002, and P < .001, respectively, by multiple regression). When all important factors were considered in a stepwise multiple linear regression analysis, a significant correlation with optimal CPAP pressure was formulated by factoring the uFTP, HMD, and AHI (optimal CPAP pressure = 1.01 uFTP + 0.74 HMD + 0.059 AHI - 1.603). This study distinguished the correlation between uFTP, HMD, and AHI with the optimal CPAP pressure. The structure of the upper airway (especially tongue base obstruction) and disease severity may predict the effective level of CPAP pressure. 4. © 2015 The American Laryngological, Rhinological and Otological Society, Inc.

Delay of Gratification, Delay Discounting and their Associations with Age, Episodic Future Thinking, and Future Time Perspective

PubMed Central

Göllner, Lars M.; Ballhausen, Nicola; Kliegel, Matthias; Forstmeier, Simon

2018-01-01

The delay of gratification (DoG) in children is widely investigated with an experimental procedure originally called the “marshmallow test,” whereas the studies on self-regulation (SR) in adolescents and adults usually use self-report questionnaires. Delay discounting (DD) measures simplify the DoG procedure and focus on monetary rewards. The aim of this study was to investigate age differences in DoG and DD from childhood to old age using a test that is suitable for both children and adults. Furthermore, investigations were conducted on the association between DoG/DD and two future orientation constructs [future time perspective (FTP) and episodic future thinking (EFT)] as well as age differences in these constructs. Participants from five age groups (9–14, 18–25, 35–55, 65–80, 80+) participated in the study (N = 96). While we found no age difference for DoG, DD was the lowest [i.e., self-control (SC) was the highest] in young/middle adults; however, it was the highest (i.e., SC was the lowest) in children and old/oldest adults. Furthermore, we found significant age differences for DD and FTP. As predicted, there were strong correlations between DoG and FTP and between DD and FTP, but not between DoG/DD and EFT. These results indicate that age differences in SR vary across the measures used. Individuals who generally think and act in a future-oriented manner have a stronger ability to delay gratification. PMID:29422875

Time counts: future time perspective, goals, and social relationships.

PubMed

Lang, Frieder R; Carstensen, Laura L

2002-03-01

On the basis of postulates derived from socioemotional selectivity theory, the authors explored the extent to which future time perspective (FTP) is related to social motivation, and to the composition and perceived quality of personal networks. Four hundred eighty German participants with ages ranging from 20 to 90 years took part in the study. In 2 card-sort tasks, participants indicated their partner preference and goal priority. Participants also completed questionnaires on personal networks and social satisfaction. Older people, as a group, perceived their future time as more limited than younger people. Individuals who perceived future time as being limited prioritized emotionally meaningful goals (e.g., generativity, emotion regulation), whereas individuals who perceived their futures as open-ended prioritized instrumental or knowledge-related goals. Priority of goal domains was found to be differently associated with the size, composition, and perceived quality of personal networks depending on FTP. Prioritizing emotion-regulatory goals was associated with greater social satisfaction and less perceived strain with others when participants perceived their future as limited. Findings underscore the importance of FTP in the self-regulation of social relationships and the subjective experience associated with them.

Saturnian satellite observations made in Brazil during the 1995 opposition with an astrometric analysis

NASA Astrophysics Data System (ADS)

Vienne, A.; Thuillot, W.; Veiga, C. H.; Arlot, J.-E.; Vieira Martins, R.

2001-12-01

This paper provides an analysis of astrometric measurements of the main Saturnian satellites made thanks to CCD observations performed in 1995 at the Laboratório Nacional de Astrofísica at Itajubá in Brazil. The astrometric reduction is discussed especially the small corrections done here, but most of time neglected elsewhere. A catalog of 6006 differential positions has been obtained. They have been compared to different ephemerides, the Vienne & Duriez ephemerides (TASS 1.7), the Harper & Taylor ephemerides and the Dourneau ephemerides. These observations provide a large set of modern observations, and appear to be of good precision. This accuracy is needed for future use of these data to improve the dynamical models. These positions are included in the data base NSDC dedicated to the natural satellites (ftp://ftp.bdl.fr/pub/NSDC/saturn/raw_data/position/). They are also available at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsweb.u-strasbg.fr/cgi-bin/qcat?J/A+A/380/727

Dynamic deformation inspection of a human arm by using a line-scan imaging system

NASA Astrophysics Data System (ADS)

Hu, Eryi

2009-11-01

A line-scan imaging system is used in the dynamic deformation measurement of a human arm when the muscle is contracting and relaxing. The measurement principle is based on the projection grating profilometry, and the measuring system is consisted of a line-scan CCD camera, a projector, optical lens and a personal computer. The detected human arm is put upon a reference plane, and a sinusoidal grating is projected onto the object surface and reference plane at an incidence angle, respectively. The deformed fringe pattern in the same line of the dynamic detected arm is captured by the line-scan CCD camera with free trigger model, and the deformed fringe pattern is recorded in the personal computer for processing. A fast Fourier transform combining with a filtering and spectrum shifting method is used to extract the phase information caused by the profile of the detected object. Thus, the object surface profile can be obtained following the geometric relationship between the fringe deformation and the object surface height. Furthermore, the deformation procedure can be obtained line by line. Some experimental results are presented to prove the feasibility of the inspection system.

Surface Chemistry, Microstructure, and Tribological Properties of Cubic Boron Nitride Films

NASA Technical Reports Server (NTRS)

Watanabe, Shuichi; Wheeler, Donald R.; Abel, Phillip B.; Street, Kenneth W.; Miyoshi, Kazuhisa; Murakawa, Masao; Miyake, Shojiro

1998-01-01

This report deals with the surface chemistry, microstructure, bonding state, morphology, and friction and wear properties of cubic boron nitride (c-BN) films that were synthesized by magnetically enhanced plasma ion plating. Several analytical techniques - x-ray photoelectron spectroscopy, transmission electron microscopy and electron diffraction, Fourier transform infrared spectroscopy, atomic force microscopy, and surface profilometry - were used to characterize the films. Sliding friction experiments using a ball-on-disk configuration were conducted for the c-BN films in sliding contact with 440C stainless-steel balls at room temperature in ultrahigh vacuum (pressure, 10(exp -6), in ambient air, and under water lubrication. Results indicate that the boron-to-nitrogen ratio on the surface of the as-deposited c-BN film is greater than 1 and that not all the boron is present as boron nitride but a small percentage is present as an oxide. Both in air and under water lubrication, the c-BN film in sliding contact with steel showed a low wear rate, whereas a high wear rate was observed in vacuum. In air and under water lubrication, c-BN exhibited wear resistance superior to that of amorphous boron nitride, titanium nitride, and titanium carbide.

Biofunctionalized anti-corrosive silane coatings for magnesium alloys.

PubMed

Liu, Xiao; Yue, Zhilian; Romeo, Tony; Weber, Jan; Scheuermann, Torsten; Moulton, Simon; Wallace, Gordon

2013-11-01

Biodegradable magnesium alloys are advantageous in various implant applications, as they reduce the risks associated with permanent metallic implants. However, a rapid corrosion rate is usually a hindrance in biomedical applications. Here we report a facile two step procedure to introduce multifunctional, anti-corrosive coatings on Mg alloys, such as AZ31. The first step involves treating the NaOH-activated Mg with bistriethoxysilylethane to immobilize a layer of densely crosslinked silane coating with good corrosion resistance; the second step is to impart amine functionality to the surface by treating the modified Mg with 3-amino-propyltrimethoxysilane. We characterized the two-layer anticorrosive coating of Mg alloy AZ31 by Fourier transform infrared spectroscopy, static contact angle measurement and optical profilometry, potentiodynamic polarization and AC impedance measurements. Furthermore, heparin was covalently conjugated onto the silane-treated AZ31 to render the coating haemocompatible, as demonstrated by reduced platelet adhesion on the heparinized surface. The method reported here is also applicable to the preparation of other types of biofunctional, anti-corrosive coatings and thus of significant interest in biodegradable implant applications. Copyright © 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

A new system for measuring three-dimensional back shape in scoliosis

PubMed Central

Pynsent, Paul; Fairbank, Jeremy; Disney, Simon

2008-01-01

The aim of this work was to develop a low-cost automated system to measure the three-dimensional shape of the back in patients with scoliosis. The resulting system uses structured light to illuminate a patient’s back from an angle while a digital photograph is taken. The height of the surface is calculated using Fourier transform profilometry with an accuracy of ±1 mm. The surface is related to body axes using bony landmarks on the back that have been palpated and marked with small coloured stickers prior to photographing. Clinical parameters are calculated automatically and presented to the user on a monitor and as a printed report. All data are stored in a database. The database can be interrogated and successive measurements plotted for monitoring the deformity changes. The system developed uses inexpensive hardware and open source software. Accurate surface topography can help the clinician to measure spinal deformity at baseline and monitor changes over time. It can help the patients and their families to assess deformity. Above all it reduces the dependence on serial radiography and reduces radiation exposure when monitoring spinal deformity. PMID:18247064

Facilitator training program: The Université Laval Interprofessional Initiative.

PubMed

Milot, Élise; Museux, Anne-Claire; Careau, Emmanuelle

2017-03-01

A facilitator training program (FTP) for interprofessional learning (IPL) facilitators has been developed at Université Laval. This article describes the impacts of this program as perceived by the 22 IPL facilitators involved and outlines recommendations. Two qualitative data collection strategies were used to document the facilitators' pedagogical needs and views of the program's impacts. Results suggest that the FTP's pedagogical approach was effective. The IPL facilitators became more aware of their challenges and identified concrete strategies to use. Training initiatives should equip IPL facilitators to cope with uncertainty, create a climate supporting active learning, and facilitate positive interactions between students.

Worldwide Emerging Environmental Issues Affecting the U.S. Military. November 2009 Report

DTIC Science & Technology

2009-11-01

091106_Climate_Change.doc.htm Climate Change and Food Security in the Pacific ftp://ftp.fao.org/docrep/fao/012/i1262e/i1262e00. pdf Food security in the...2009/en/ pdf /EN_SOWP09. pdf Women Central to Efforts to Deal With Climate Change , Says New UNFPA Report http://www.unfpa.org/public/News/pid/4259...Announce Climate Change Goals…………………………………….1 Item 2. Changes to War Crimes Proposed for the International Criminal Court…..………1 Item 3. Increased

Surface Relief of Mapping

NASA Astrophysics Data System (ADS)

Costa, Manuel F.; Almeida, Jose B.

1989-02-01

We will describe in this communication a noncont act method of measuring surface profile, it does not require any surface preparation, and it can be used with a very large range of surfaces from highly reflecting to non reflecting ones and as complex as textile surfaces. This method is reasonably immune to dispersion and diffraction, which usually make very difficult the application of non contact profilometry methods to a wide range of materials and situations, namely on quality control systems in industrial production lines. The method is based on the horizontal shift of the bright spot on a horizontal surface when this is illuminated with an oblique beam and moved vertically. in order to make the profilometry the sample is swept by an oblique light beam and the bright spot position is compared with a reference position. The bright spot must be as small as possible, particularly in very irregular surfaces; so the light beam diameter must be as small as possible and the incidence angle must not be too small. The sensivity of a system based on this method will be given, mostly, by the reception optical system.

Local blur analysis and phase error correction method for fringe projection profilometry systems.

PubMed

Rao, Li; Da, Feipeng

2018-05-20

We introduce a flexible error correction method for fringe projection profilometry (FPP) systems in the presence of local blur phenomenon. Local blur caused by global light transport such as camera defocus, projector defocus, and subsurface scattering will cause significant systematic errors in FPP systems. Previous methods, which adopt high-frequency patterns to separate the direct and global components, fail when the global light phenomenon occurs locally. In this paper, the influence of local blur on phase quality is thoroughly analyzed, and a concise error correction method is proposed to compensate the phase errors. For defocus phenomenon, this method can be directly applied. With the aid of spatially varying point spread functions and local frontal plane assumption, experiments show that the proposed method can effectively alleviate the system errors and improve the final reconstruction accuracy in various scenes. For a subsurface scattering scenario, if the translucent object is dominated by multiple scattering, the proposed method can also be applied to correct systematic errors once the bidirectional scattering-surface reflectance distribution function of the object material is measured.

Study of Etching Pits in a Large-grain Single Cell Bulk Niobium Cavity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhao, Xin; Ciovati, Gianluigi; Reece, Charles E.

2009-11-01

Performance of SRF cavities are limited by non-linear localized effects. The variation of local material characters between "hot" and "cold" spots is thus of intense interest. Such locations were identified in a BCP-etched large-grain single-cell cavity and removed for examination by high resolution electron microscopy (SEM), electron-back scattering diffraction microscopy (EBSD), optical microscopy, and 3D profilometry. Pits with clearly discernable crystal facets were observed in both "hotspot" and "coldspot" specimens. The pits were found in-grain, at bi-crystal boundaries, and on tri-crystal junctions. They are interpreted as etch pits induced by surface crystal defects (e.g. dislocations). All "coldspots" examined had qualitativelymore » low density of etching pits or very shallow tri-crystal boundary junction. EBSD revealed crystal structure surrounding the pits via crystal phase orientation mapping, while 3D profilometry gave information on the depth and size of the pits. In addition, a survey of the samples by energy dispersive X-ray analysis (EDX) did not show any significant contamination of the samples surface.« less

Interaction of atomic oxygen with thin film and bulk copper: An XPS, AES, XRD, and profilometer study

NASA Technical Reports Server (NTRS)

Raikar, Genesh N.; Gregory, John C.; Christl, Ligia C.; Peters, Palmer N.

1992-01-01

The University of Alabama in Huntsville (UAH) experiment A-0114 was designed primarily to study degradation of material surfaces due to low earth orbital (LEO) atmospheric oxygen. The experiment contained 128 one inch circular samples: metals, polymers, carbons, and semiconductors. Among metal samples, copper has shown some interesting new results. Two types of copper samples, a film sputter coated on fused silica and a bulk piece of OFHC copper, were characterized employing a variety of techniques such as X-ray and Auger electron spectroscopies, X-ray diffraction, and high resolution profilometry. Cu 2p core level spectra were used to characterize the presence of Cu2O and CuO in addition to Cu Auger LMM lines. These results are supported by our recent X-ray diffraction studies which clearly establish the presence of Cu oxides which we were unable to prove in our earlier work. Profilometry showed an increase in thickness of the film sample where exposed to 106.7 +/- 0.5 nm from an initial thickness of 74.2 +/- 1.1 nm. Further studies with SEM and ellipsometry are underway.

Evaluation of the smoothness and accuracy of scanning photorefractive keratectomy on PMMA by optical profilometry

NASA Astrophysics Data System (ADS)

Manns, Fabrice; Rol, Pascal O.; Parel, Jean-Marie A.; Schmid, Armin; Shen, Jin-Hui; Matsui, Takaaki; Soederberg, Per G.

1996-05-01

The smoothness and accuracy of PMMA ablations with a prototype scanning photorefractive keratectomy (SPRK) system were evaluated by optical profilometry. A prototype frequency- quintupled Nd:YAG laser (Laser Harmonic, LaserSight, Orlando, FL) was used (wavelength: 213 nm, pulse duration: 15 ns, repetition rate: 10 Hz). The laser energy was delivered through two computer-controlled galvanometer scanners that were controlled with our own hardware and software. The system was programmed to create on a block of PMMA the ablations corresponding to the correction of 6 diopters of myopia with 60%, 70%, and 80% spot overlap. The energy was 1.25 mJ. After ablation, the topography of the samples was measured with an optical profilometer (UBM Messtechnik, Ettlingen, Germany). The ablation depth was 10 to 15 micrometer larger than expected. The surfaces created with 50% to 70% overlap exhibited large saw-tooth like variations, with a maximum peak to peak variation of approximately 20 micrometer. With 80% overlap, the rms roughness was 1.3 micrometer and the central flattening was 7 diopters. This study shows that scanning PRK can produce smooth and accurate ablations.

Roughness and pH changes of enamel surface induced by soft drinks in vitro-applications of stylus profilometry, focus variation 3D scanning microscopy and micro pH sensor.

PubMed

Fujii, Mie; Kitasako, Yuichi; Sadr, Alireza; Tagami, Junji

2011-01-01

This study aimed to evaluate enamel surface roughness (Ra) and pH before and after erosion by soft drinks. Enamel was exposed to a soft drink (cola, orange juice or green tea) for 1, 5 or 60 min; Ra was measured using contact-stylus surface profilometry (SSP) and non-contact focus variation 3D microscope (FVM). Surface pH was measured using a micro pH sensor. Data were analyzed at significance level of alpha=0.05. There was a significant correlation in Ra between SSP and FVM. FVM images showed no changes in the surface morphology after various periods of exposure to green tea. Unlike cola and orange juice, exposure to green tea did not significantly affect Ra or pH. A significant correlation was observed between surface pH and Ra change after exposure to the drinks. Optical surface analysis and micro pH sensor may be useful tools for non-damaging, quantitative assessment of soft drinks erosion on enamel.

Shape measurement of objects with large discontinuities and surface isolations using complementary grating projection

NASA Astrophysics Data System (ADS)

Hao, Yudong; Zhao, Yang; Li, Dacheng

1999-11-01

Grating projection 3D profilometry has three major problems that have to be handled with great care. They are local shadows, phase discontinuities and surface isolations. Carrying no information, shadow areas give us no clue about the profile there. Phase discontinuities often baffle phase unwrappers because they may be generated for several reasons difficult to distinguish. Spatial phase unwrapping will inevitably fail if the object under teste have surface isolations. In this paper, a complementary grating projection profilometry is reported, which attempts to tackle the three aforementioned problems simultaneously. This technique involves projecting two grating patterns form both sides of the CCD camera. Phase unwrapping is carried out pixel by pixel using the two phase maps based on the excess fraction method, which is immune to phase discontinuities or surface isolations. Complementary projection makes sure that no area in the visible volume of CCD is devoid of fringe information, although in some cases a small area of the reconstructed profile is of low accuracy compared with others. The system calibration procedures and measurement results are presented in detail, and possible improvement is discussed.

A versatile optical profilometer based on conoscopic holography sensors for acquisition of specular and diffusive surfaces in artworks

NASA Astrophysics Data System (ADS)

Gaburro, Nicola; Marchioro, Giacomo; Daffara, Claudia

2017-07-01

Surface metrology of artworks requires the design of suitable devices for in-situ non-destructive measurement together with reliable procedures for an effective analysis of such non-engineered variegate objects. To advance the state-of-the-art it has been implemented a versatile optical micro-profilometry taking advantage of the adapt- ability of conoscopic holography sensors, able to operate with irregular shapes and composite materials (diffusive, specular, and polychrome) of artworks. The scanning technique is used to obtain wide field and high spatially resolved areal profilometry. The prototype has a modular scheme based on a set of conoscopic sensors, extending the typical design based on a scanning stage and a single probe with a limited bandwidth, thus allowing the collection of heights data from surface with different scales and materials with variegate optical response. The system was optimized by characterizing the quality of the measurement with the probes triggered in continuous scanning modality. The results obtained on examples of cultural heritage objects (2D paintings, 3D height-relief) and materials (pictorial, metallic) demonstrate the versatility of the implemented device.

Fiber laser welding of dual-phase galvanized sheet steel (DP590): traditional analysis and new quality assessment techniques

NASA Astrophysics Data System (ADS)

Miller, Stephanie; Pfeif, Erik; Kazakov, Andrei; Baumann, Esther; Dowell, Marla

2016-03-01

Laser welding has many advantages over traditional joining methods, yet remains underutilized. NIST has undertaken an ambitious initiative to improve predictions of weldability, reliability, and performance of laser welds. This study investigates butt welding of galvanized and ungalvanized dual-phase automotive sheet steels (DP 590) using a 10 kW commercial fiber laser system. Parameter development work, hardness profiles, microstructural characterization, and optical profilometry results are presented. Sound welding was accomplished in a laser power range of 2.0 kW to 4.5 kW and travel speed of 2000 mm/min to 5000 mm/min. Vickers hardness ranged from approximately 2 GPa to 4 GPa across the welds, with limited evidence of heat affected zone softening. Decreased hardness across the heat affected zone directly correlated to the appearance of ferrite. A technique was developed to non-destructively evaluate weld quality based on geometrical criteria. Weld face profilometry data were compared between light optical, metallographic sample, and frequency-modulated continuous-wave laser detection and ranging (FMCW LADAR) methods.

Future Time Perspective and Awareness of Age-Related Change: Examining their Role in Predicting Psychological Well-Being

PubMed Central

Brothers, Allyson; Gabrian, Martina; Wahl, Hans-Werner; Diehl, Manfred

2016-01-01

This study examined how two distinct facets of perceived personal lifetime – future time perspective (FTP) and awareness of age-related change (AARC) – are associated with one another, and how they may interact to predict psychological well-being. To better understand associations among subjective perceptions of lifetime, aging and well-being, we tested a series of models to investigate questions of directionality, indirect effects, and conditional processes among FTP, AARC-Gains, AARC-Losses, and psychological well-being. In all models, we tested for differences between middle-aged and older adults, and between adults from the U.S. and Germany. Analyses were conducted within a structural equation modeling framework on a cross-national, 2.5-year longitudinal sample of 537 community-residing adults (age 40–98 years). Awareness of age-related losses (AARC-Losses) at Time 1 predicted FTP at Time 2, but FTP did not predict AARC-Gains or AARC-Losses. Furthermore, future time perspective mediated the association between AARC-Losses and well-being. Moderation analyses revealed a buffering effect of awareness of age-related gains (AARC-Gains) in which perceptions of more age-related gains diminished the negative effect of a limited future time perspective on well-being. Effects were robust across age groups and countries. Taken together, these findings suggest that perceived age-related loss experiences may sensitize individuals to perceive a more limited future lifetime which may then lead to lower psychological well-being. In contrast, perceived age-related gains may function as a resource to preserve psychological well-being, in particular when time is perceived as running out. PMID:27243764

A driving cycle for vehicle emissions estimation in the metropolitan area of Mexico City.

PubMed

Schifter, I; Díaz, L; Rodríguez, R; López-Salinas, E

2005-02-01

A driving cycle derived from driving behavior and real traffic conditions in Mexico City (MC) is proposed. Data acquisition was carried out over diverse MC routes, representing travel under congested and uncongested conditions, using the chase-car approach. Thirteen different on-road patterns, including the four main access roads to MC, trips in both directions and different timetables, a total of 108 trips spanning 1044 km were evaluated in this study. The MC cycle lasts 1360 seconds with a distance of 8.8 km and average speed of 23.4 km h(-1). Both maximum speed (73.6 km h(-1)) and maximum acceleration (2.22 km h(-1)s(-1)) are lower than those of the new vehicles certification employed in Mexico ,FTP-75 cycle., that is, the MC cycle exhibits less cruising time and more transient events than the FTP cycle. A total of 30 light duty gasoline vehicles were classified into different technological groups and tested in an FTP-75 and MC driving cycles in order to compare their emission factors A potential concern is that in Mexico manufacturers design vehicles to meet the emission standards in the FTP, but emission levels increase significantly in a more representative cycle of present driving patterns in the Metropolitan Area of Mexico City (MAMC). The use of a more representative cycle during certification testing, would provide an incentive for vehicle manufacturers to design emissions control systems to remain effective during operation modes that are not currently represented in the official test procedures used in the certification process. Based on the results of the study, the use of MC cycle, which better represents current day driving patterns during testing of vehicle fleets in emissions laboratories, would improve the accuracy of emissions factors used in the MAMC emissions inventories.

Carbon stars in the X-Shooter Spectral Library

NASA Astrophysics Data System (ADS)

Gonneau, A.; Lançon, A.; Trager, S. C.; Aringer, B.; Lyubenova, M.; Nowotny, W.; Peletier, R. F.; Prugniel, P.; Chen, Y.-P.; Dries, M.; Choudhury, O. S.; Falcón-Barroso, J.; Koleva, M.; Meneses-Goytia, S.; Sánchez-Blázquez, P.; Vazdekis, A.

2016-05-01

We provide a new collection of spectra of 35 carbon stars obtained with the ESO/VLT X-Shooter instrument as part of the X-Shooter Spectral Library project. The spectra extend from 0.3 μm to 2.4 μm with a resolving power above ~8000. The sample contains stars with a broad range of (J - K) color and pulsation properties located in the Milky Way and the Magellanic Clouds. We show that the distribution of spectral properties of carbon stars at a given (J - K) color becomes bimodal (in our sample) when (J - K) is larger than about 1.5. We describe the two families of spectra that emerge, characterized by the presence or absence of the absorption feature at 1.53 μm, generally associated with HCN and C2H2. This feature appears essentially only in large-amplitude variables, though not in all observations. Associated spectral signatures that we interpret as the result of veiling by circumstellar matter, indicate that the 1.53 μm feature might point to episodes of dust production in carbon-rich Miras. Based on observations collected at the European Southern Observatory, Paranal, Chile, Prog. ID 084.B-0869(A/B), 085.B-0751(A/B), 189.B-0925(A/B/C/D).Tables 1, B.1, E.1, E.2 are also available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (ftp://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/589/A36The reduced spectra are only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (ftp://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/589/A36

Penicillin binding protein 3 of Staphylococcus aureus NCTC 8325-4 binds and activates human plasminogen.

PubMed

Kylväjä, Riikka; Ojalehto, Tuomas; Kainulainen, Veera; Virkola, Ritva; Westerlund-Wikström, Benita

2016-08-04

Staphylococcus aureus is a versatile pathogen expressing a number of virulence-associated adhesive molecules. In a previous study, we generated in a secretion-competent Escherichia coli strain a library of random FLAG-tag positive (FTP) polypeptides of S. aureus. To identify adhesive proteins and gain additional knowledge on putative virulence factors of S. aureus, we here screened the FTP library against human serum proteins. Staphylococcus aureus NCTC 8325-4, origin of the FTP library, adhered to immobilized plasminogen in vitro. In an enzyme-linked immunoassay a C-terminal part of penicillin binding protein 3 (PBP3), included in the FTP library, bound to immobilized plasminogen. We expressed and purified full-length PBP3 and its C-terminal fragments as recombinant proteins. In a time-resolved fluorometry-based assay the PBP3 polypeptides bound to immobilized plasminogen. The polypeptides enhanced formation of plasmin from plasminogen as analyzed by cleavage of a chromogenic plasmin substrate. The present findings, although preliminary, demonstrate reliably that S. aureus NCTC 8325-4 adheres to immobilized plasminogen in vitro and that the adhesion may be mediated by a C-terminal fragment of the PBP3 protein. The full length PBP3 and the penicillin binding C-terminal domain of PBP3 expressed as recombinant proteins bound plasminogen and activated plasminogen to plasmin. These phenomena were inhibited by the lysine analogue ε-aminocaproic acid suggesting that the binding is mediated by lysine residues. A detailed molecular description of surface molecules enhancing the virulence of S. aureus will aid in understanding of its pathogenicity and help in design of antibacterial drugs in the future.

An investigation of final year pharmacy students' moral reasoning ability, and their views on professionalism and fitness to practice panel determinations: A questionnaire study.

PubMed

Hanna, Lezley-Anne; Gillen, John; Hall, Maurice

2017-07-01

The aim was to establish pharmacy students' moral reasoning ability and obtain their views on professionalism and fitness to practice (FtP) determinations involving pharmacists. Following ethical approval and piloting, final year pharmacy students at Queen's University Belfast (QUB) (n=119) were invited to participate in a questionnaire study. Section A was a validated moral reasoning assessment tool [Defining Issues Test (DIT2); five moral dilemmas], Section B was FtP cases and professionalism. Distribution occurred at a compulsory class. DIT2 data were scored by the University of Alabama. Descriptive statistics and non-parametric tests were used with significance level set at 0.05 a priori. The response rate was 94.1% (112/119) and the 'DIT2 P score mean' (postconventional schema) was 25.21±14.10. Almost all [(98.2% (110/112)] fully understood the term "professionalism" and 83.9% (94/112) considered it reasonable for a professional code to apply always (within university and out socializing). Differences in opinions existed depending on what the FtP case related to. Students were significantly more likely to consider a 12-month suspension 'very lenient' or 'lenient' for a pharmacist's personal use of illicit drugs compared with theft of money/cosmetics (42.0% versus 64.3%; p=0.031). There were no significant differences between male and female responses/scores and no strong correlations between DIT2 scores and FtP/professionalism responses. Pharmacy students appeared to understand professionalism and accepted being bound by a code. A level of discrimination between the FtP cases was evident. Moral reasoning ability was lower than expected for future healthcare professionals (see manuscript) requiring attention. Copyright © 2017 Elsevier Inc. All rights reserved.

Radiographic Investigation of the Distal Extension of Fractures Into the Articular Surface of the Tibia (The RIDEFAST Study).

PubMed

Marchand, Lucas S; Rane, Ajinkya A; Working, Zachary M; Jacobson, Lance G; Kubiak, Erik N; Higgins, Thomas F; Rothberg, David L

2017-12-01

To determine whether radiographic measurements are predictive of involvement of the distal tibia articular surface in tibial shaft fractures. Retrospective review. Academic Level-I trauma hospital. Two-hundred seventeen patients with tibial shaft fractures distal to the isthmus (OTA/AO: 42-A1-3; 42-B1-3; 42-C1-3; and 43-A1-3). Analysis of anteroposterior (AP) and lateral radiographs. The following parameters were measured: (1) angle between the predominant fracture line and the plane of the tibial plafond (α-angle), (2) length of the shaft fracture, (3) distance from the most inferior extent of the shaft fracture to the tibial plafond (DTP), (4) width of the tibial plafond, (5) width of the tibial isthmus, (6) ratio of fracture length to DTP (FTP), and (7) fibular fracture distance. Distal intra-articular involvement (DIA). A total of 217 patients were identified, 56 (26%) with DIA. The FTP ratio as measured on both the AP (odds ratio: 8.20, confidence interval, 4.26-17.22, P < 0.0001) and lateral radiographs (10.00, 4.78-23.23, <0.0001) was the most effective screening measurement for DIA. AP and lateral FTP ratios of 0.224 and 0.255, respectively, achieved a negative predictive value of 100%, eliminating the need for computed tomography in 16%-23% of injuries. Involvement of the distal articular surface in patients with distal tibial shaft fractures is significantly associated with fracture geometry and pattern. The FTP ratio may be used as an effective screening tool to rule out of intra-articular involvement. Diagnostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Future time perspective and awareness of age-related change: Examining their role in predicting psychological well-being.

PubMed

Brothers, Allyson; Gabrian, Martina; Wahl, Hans-Werner; Diehl, Manfred

2016-09-01

This study examined how 2 distinct facets of perceived personal lifetime-future time perspective (FTP) and awareness of age-related change (AARC)-are associated with another, and how they may interact to predict psychological well-being. To better understand associations among subjective perceptions of lifetime, aging, and well-being, we tested a series of models to investigate questions of directionality, indirect effects, and conditional processes among FTP, AARC-Gains, AARC-Losses, and psychological well-being. In all models, we tested for differences between middle-aged and older adults, and between adults from the United States and Germany. Analyses were conducted within a structural equation modeling framework on a cross-national, 2.5-year longitudinal sample of 537 community-residing adults (age 40-98 years). Awareness of age-related losses (AARC-Losses) at Time 1 predicted FTP at Time 2, but FTP did not predict AARC-Gains or AARC-Losses. Furthermore, future time perspective mediated the association between AARC-Losses and well-being. Moderation analyses revealed a buffering effect of awareness of age-related gains (AARC-Gains) in which perceptions of more age-related gains diminished the negative effect of a limited future time perspective on well-being. Effects were robust across age groups and countries. Taken together, these findings suggest that perceived age-related loss experiences may sensitize individuals to perceive a more limited future lifetime which may then lead to lower psychological well-being. In contrast, perceived age-related gains may function as a resource to preserve psychological well-being, in particular when time is perceived as running out. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Signal processing in urodynamics: towards high definition urethral pressure profilometry.

PubMed

Klünder, Mario; Sawodny, Oliver; Amend, Bastian; Ederer, Michael; Kelp, Alexandra; Sievert, Karl-Dietrich; Stenzl, Arnulf; Feuer, Ronny

2016-03-22

Urethral pressure profilometry (UPP) is used in the diagnosis of stress urinary incontinence (SUI) which is a significant medical, social, and economic problem. Low spatial pressure resolution, common occurrence of artifacts, and uncertainties in data location limit the diagnostic value of UPP. To overcome these limitations, high definition urethral pressure profilometry (HD-UPP) combining enhanced UPP hardware and signal processing algorithms has been developed. In this work, we present the different signal processing steps in HD-UPP and show experimental results from female minipigs. We use a special microtip catheter with high angular pressure resolution and an integrated inclination sensor. Signals from the catheter are filtered and time-correlated artifacts removed. A signal reconstruction algorithm processes pressure data into a detailed pressure image on the urethra's inside. Finally, the pressure distribution on the urethra's outside is calculated through deconvolution. A mathematical model of the urethra is contained in a point-spread-function (PSF) which is identified depending on geometric and material properties of the urethra. We additionally investigate the PSF's frequency response to determine the relevant frequency band for pressure information on the urinary sphincter. Experimental pressure data are spatially located and processed into high resolution pressure images. Artifacts are successfully removed from data without blurring other details. The pressure distribution on the urethra's outside is reconstructed and compared to the one on the inside. Finally, the pressure images are mapped onto the urethral geometry calculated from inclination and position data to provide an integrated image of pressure distribution, anatomical shape, and location. With its advanced sensing capabilities, the novel microtip catheter collects an unprecedented amount of urethral pressure data. Through sequential signal processing steps, physicians are provided with detailed information on the pressure distribution in and around the urethra. Therefore, HD-UPP overcomes many current limitations of conventional UPP and offers the opportunity to evaluate urethral structures, especially the sphincter, in context of the correct anatomical location. This could enable the development of focal therapy approaches in the treatment of SUI.

Compression and Transmission of RF Signals for Telediagnosis

NASA Astrophysics Data System (ADS)

Seko, Toshihiro; Doi, Motonori; Oshiro, Osamu; Chihara, Kunihiro

2000-05-01

Health care is a critical issue nowadays. Much emphasis is given to quality care for all people. Telediagnosis has attracted public attention. We propose a new method of ultrasound image transmission for telediagnosis. In conventional methods, video image signals are transmitted. In our method, the RF signals which are acquired by an ultrasound probe, are transmitted. The RF signals can be transformed to color Doppler images or high-resolution images by a receiver. Because a stored form is adopted, the proposed system can be realized with existent technology such as hyper text transfer protocol (HTTP) and file transfer protocol (FTP). In this paper, we describe two lossless compression methods which specialize in the transmission of RF signals. One of the methods uses the characteristics of the RF signal. In the other method, the amount of the data is reduced. Measurements were performed in water targeting an iron block and triangular Styrofoam. Additionally, abdominal fat measurement was performed. Our method achieved a compression rate of 13% with 8 bit data.

[International bibliographic databases--Current Contents on disk and in FTP format (Internet): presentation and guide].

PubMed

Bloch-Mouillet, E

1999-01-01

This paper aims to provide technical and practical advice about finding references using Current Contents on disk (Macintosh or PC) or via the Internet (FTP). Seven editions are published each week. They are all organized in the same way and have the same search engine. The Life Sciences edition, extensively used in medical research, is presented here in detail, as an example. This methodological note explains, in French, how to use this reference database. It is designed to be a practical guide for browsing and searching the database, and particularly for creating search profiles adapted to the needs of researchers.

PATHFINDER: Probing Atmospheric Flows in an Integrated and Distributed Environment

NASA Technical Reports Server (NTRS)

Wilhelmson, R. B.; Wojtowicz, D. P.; Shaw, C.; Hagedorn, J.; Koch, S.

1995-01-01

PATHFINDER is a software effort to create a flexible, modular, collaborative, and distributed environment for studying atmospheric, astrophysical, and other fluid flows in the evolving networked metacomputer environment of the 1990s. It uses existing software, such as HDF (Hierarchical Data Format), DTM (Data Transfer Mechanism), GEMPAK (General Meteorological Package), AVS, SGI Explorer, and Inventor to provide the researcher with the ability to harness the latest in desktop to teraflop computing. Software modules developed during the project are available in the public domain via anonymous FTP from the National Center for Supercomputing Applications (NCSA). The address is ftp.ncsa.uiuc.edu, and the directory is /SGI/PATHFINDER.

Remediation of the protein data bank archive.

PubMed

Henrick, Kim; Feng, Zukang; Bluhm, Wolfgang F; Dimitropoulos, Dimitris; Doreleijers, Jurgen F; Dutta, Shuchismita; Flippen-Anderson, Judith L; Ionides, John; Kamada, Chisa; Krissinel, Eugene; Lawson, Catherine L; Markley, John L; Nakamura, Haruki; Newman, Richard; Shimizu, Yukiko; Swaminathan, Jawahar; Velankar, Sameer; Ory, Jeramia; Ulrich, Eldon L; Vranken, Wim; Westbrook, John; Yamashita, Reiko; Yang, Huanwang; Young, Jasmine; Yousufuddin, Muhammed; Berman, Helen M

2008-01-01

The Worldwide Protein Data Bank (wwPDB; wwpdb.org) is the international collaboration that manages the deposition, processing and distribution of the PDB archive. The online PDB archive at ftp://ftp.wwpdb.org is the repository for the coordinates and related information for more than 47 000 structures, including proteins, nucleic acids and large macromolecular complexes that have been determined using X-ray crystallography, NMR and electron microscopy techniques. The members of the wwPDB-RCSB PDB (USA), MSD-EBI (Europe), PDBj (Japan) and BMRB (USA)-have remediated this archive to address inconsistencies that have been introduced over the years. The scope and methods used in this project are presented.

Kinetic parameters of cholinesterase interactions with organophosphates: retrieval and comparison tools available through ESTHER database: ESTerases, alpha/beta Hydrolase Enzymes and Relatives.

PubMed

Chatonnet, A; Hotelier, T; Cousin, X

1999-05-14

Cholinesterases are targets for organophosphorus compounds which are used as insecticides, chemical warfare agents and drugs for the treatment of disease such as glaucoma, or parasitic infections. The widespread use of these chemicals explains the growing of this area of research and the ever increasing number of sequences, structures, or biochemical data available. Future advances will depend upon effective management of existing information as well as upon creation of new knowledge. The ESTHER database goal is to facilitate retrieval and comparison of data about structure and function of proteins presenting the alpha/beta hydrolase fold. Protein engineering and in vitro production of enzymes allow direct comparison of biochemical parameters. Kinetic parameters of enzymatic reactions are now included in the database. These parameters can be searched and compared with a table construction tool. ESTHER can be reached through internet (http://www.ensam.inra.fr/cholinesterase). The full database or the specialised X-window Client-server system can be downloaded from our ftp server (ftp://ftp.toulouse.inra.fr./pub/esther). Forms can be used to send updates or corrections directly from the web.

Lunar Surface Access Module Descent Engine Turbopump Technology: Detailed Design

NASA Technical Reports Server (NTRS)

Alvarez, Erika; Forbes, John C.; Thornton, Randall J.

2010-01-01

The need for a high specific impulse LOX/LH2 pump-fed lunar lander engine has been established by NASA for the new lunar exploration architecture. Studies indicate that a 4-engine cluster in the thrust range of 9,000-lbf each is a candidate configuration for the main propulsion of the manned lunar lander vehicle. The lander descent engine will be required to perform multiple burns including the powered descent onto the lunar surface. In order to achieve the wide range of thrust required, the engines must be capable of throttling approximately 10:1. Working under internal research and development funding, NASA Marshall Space Flight Center (MSFC) has been conducting the development of a 9,000-lbf LOX/LH2 lunar lander descent engine technology testbed. This paper highlights the detailed design and analysis efforts to develop the lander engine Fuel Turbopump (FTP) whose operating speeds range from 30,000-rpm to 100,000-rpm. The capability of the FTP to operate across this wide range of speeds imposes several structural and dynamic challenges, and the small size of the FTP creates scaling and manufacturing challenges that are also addressed in this paper.

Lunar Surface Access Module Descent Engine Turbopump Technology: Detailed Design

NASA Technical Reports Server (NTRS)

Alarez, Erika; Thornton, Randall J.; Forbes, John C.

2008-01-01

The need for a high specific impulse LOX/LH2 pump-fed lunar lander engine has been established by NASA for the new lunar exploration architecture. Studies indicate that a 4-engine cluster in the thrust range of 9,000-lbf each is a candidate configuration for the main propulsion of the manned lunar lander vehicle. The lander descent engine will be required to perform minor mid-course corrections, a Lunar Orbit Insertion (LOI) burn, a de-orbit burn, and the powered descent onto the lunar surface. In order to achieve the wide range of thrust required, the engines must be capable of throttling approximately 10:1. Working under internal research and development funding, NASA Marshall Space Flight Center (MSFC) has been conducting the development of a 9,000-lbf LOX/LH2 lunar lander descent engine testbed. This paper highlights the detailed design and analysis efforts to develop the lander engine Fuel Turbopump (FTP) whose operating speeds range from 30,000-rpm to 100,000-rpm. The capability of the FTP to operate across this wide range of speeds imposes several structural and dynamic challenges, and the small size of the FTP creates scaling and manufacturing challenges that are also addressed in this paper.

Rationally designed chemokine-based toxin targeting the viral G protein-coupled receptor US28 potently inhibits cytomegalovirus infection in vivo

PubMed Central

Spiess, Katja; Jeppesen, Mads G.; Malmgaard-Clausen, Mikkel; Krzywkowski, Karen; Dulal, Kalpana; Cheng, Tong; Hjortø, Gertrud M.; Larsen, Olav; Burg, John S.; Jarvis, Michael A.; Christopher Garcia, K.; Zhu, Hua; Kledal, Thomas N.; Rosenkilde, Mette M.

2015-01-01

The use of receptor–ligand interactions to direct toxins to kill diseased cells selectively has shown considerable promise for treatment of a number of cancers and, more recently, autoimmune disease. Here we move the fusion toxin protein (FTP) technology beyond cancer/autoimmune therapeutics to target the human viral pathogen, human cytomegalovirus (HCMV), on the basis of its expression of the 7TM G protein-coupled chemokine receptor US28. The virus origin of US28 provides an exceptional chemokine-binding profile with high selectivity and improved binding for the CX3C chemokine, CX3CL1. Moreover, US28 is constitutively internalizing by nature, providing highly effective FTP delivery. We designed a synthetic CX3CL1 variant engineered to have ultra-high affinity for US28 and greater specificity for US28 than the natural sole receptor for CX3CL1, CX3CR1, and we fused the synthetic variant with the cytotoxic domain of Pseudomonas Exotoxin A. This novel strategy of a rationally designed FTP provided unparalleled anti-HCMV efficacy and potency in vitro and in vivo. PMID:26080445

Concurrent neuromechanical and functional gains following upper-extremity power training post-stroke

PubMed Central

2013-01-01

Background Repetitive task practice is argued to drive neural plasticity following stroke. However, current evidence reveals that hemiparetic weakness impairs the capacity to perform, and practice, movements appropriately. Here we investigated how power training (i.e., high-intensity, dynamic resistance training) affects recovery of upper-extremity motor function post-stroke. We hypothesized that power training, as a component of upper-extremity rehabilitation, would promote greater functional gains than functional task practice without deleterious consequences. Method Nineteen chronic hemiparetic individuals were studied using a crossover design. All participants received both functional task practice (FTP) and HYBRID (combined FTP and power training) in random order. Blinded evaluations performed at baseline, following each intervention block and 6-months post-intervention included: Wolf Motor Function Test (WMFT-FAS, Primary Outcome), upper-extremity Fugl-Meyer Motor Assessment, Ashworth Scale, and Functional Independence Measure. Neuromechanical function was evaluated using isometric and dynamic joint torques and concurrent agonist EMG. Biceps stretch reflex responses were evaluated using passive elbow stretches ranging from 60 to 180º/s and determining: EMG onset position threshold, burst duration, burst intensity and passive torque at each speed. Results Primary outcome: Improvements in WMFT-FAS were significantly greater following HYBRID vs. FTP (p = .049), regardless of treatment order. These functional improvements were retained 6-months post-intervention (p = .03). Secondary outcomes: A greater proportion of participants achieved minimally important differences (MID) following HYBRID vs. FTP (p = .03). MIDs were retained 6-months post-intervention. Ashworth scores were unchanged (p > .05). Increased maximal isometric joint torque, agonist EMG and peak power were significantly greater following HYBRID vs. FTP (p < .05) and effects were retained 6-months post-intervention (p’s < .05). EMG position threshold and burst duration were significantly reduced at fast speeds (≥120º/s) (p’s < 0.05) and passive torque was reduced post-washout (p < .05) following HYBRID. Conclusions Functional and neuromechanical gains were greater following HYBRID vs. FPT. Improved stretch reflex modulation and increased neuromuscular activation indicate potent neural adaptations. Importantly, no deleterious consequences, including exacerbation of spasticity or musculoskeletal complaints, were associated with HYBRID. These results contribute to an evolving body of contemporary evidence regarding the efficacy of high-intensity training in neurorehabilitation and the physiological mechanisms that mediate neural recovery. PMID:23336711

Concurrent neuromechanical and functional gains following upper-extremity power training post-stroke.

PubMed

Patten, Carolynn; Condliffe, Elizabeth G; Dairaghi, Christine A; Lum, Peter S

2013-01-21

Repetitive task practice is argued to drive neural plasticity following stroke. However, current evidence reveals that hemiparetic weakness impairs the capacity to perform, and practice, movements appropriately. Here we investigated how power training (i.e., high-intensity, dynamic resistance training) affects recovery of upper-extremity motor function post-stroke. We hypothesized that power training, as a component of upper-extremity rehabilitation, would promote greater functional gains than functional task practice without deleterious consequences. Nineteen chronic hemiparetic individuals were studied using a crossover design. All participants received both functional task practice (FTP) and HYBRID (combined FTP and power training) in random order. Blinded evaluations performed at baseline, following each intervention block and 6-months post-intervention included: Wolf Motor Function Test (WMFT-FAS, Primary Outcome), upper-extremity Fugl-Meyer Motor Assessment, Ashworth Scale, and Functional Independence Measure. Neuromechanical function was evaluated using isometric and dynamic joint torques and concurrent agonist EMG. Biceps stretch reflex responses were evaluated using passive elbow stretches ranging from 60 to 180º/s and determining: EMG onset position threshold, burst duration, burst intensity and passive torque at each speed. Improvements in WMFT-FAS were significantly greater following HYBRID vs. FTP (p = .049), regardless of treatment order. These functional improvements were retained 6-months post-intervention (p = .03). A greater proportion of participants achieved minimally important differences (MID) following HYBRID vs. FTP (p = .03). MIDs were retained 6-months post-intervention. Ashworth scores were unchanged (p > .05). Increased maximal isometric joint torque, agonist EMG and peak power were significantly greater following HYBRID vs. FTP (p < .05) and effects were retained 6-months post-intervention (p's < .05). EMG position threshold and burst duration were significantly reduced at fast speeds (≥120º/s) (p's < 0.05) and passive torque was reduced post-washout (p < .05) following HYBRID. Functional and neuromechanical gains were greater following HYBRID vs. FPT. Improved stretch reflex modulation and increased neuromuscular activation indicate potent neural adaptations. Importantly, no deleterious consequences, including exacerbation of spasticity or musculoskeletal complaints, were associated with HYBRID. These results contribute to an evolving body of contemporary evidence regarding the efficacy of high-intensity training in neurorehabilitation and the physiological mechanisms that mediate neural recovery.

EDM machinability of SiCw/Al composites

NASA Technical Reports Server (NTRS)

Ramulu, M.; Taya, M.

1989-01-01

Machinability of high temperature composites was investigated. Target materials, 15 and 25 vol pct SiC whisker-2124 aluminum composites, were machined by electrodischarge sinker machining and diamond saw. The machined surfaces of these metal matrix composites were examined by SEM and profilometry to determine the surface finish. Microhardness measurements were also performed on the as-machined composites.

myChEMBL: a virtual machine implementation of open data and cheminformatics tools.

PubMed

Ochoa, Rodrigo; Davies, Mark; Papadatos, George; Atkinson, Francis; Overington, John P

2014-01-15

myChEMBL is a completely open platform, which combines public domain bioactivity data with open source database and cheminformatics technologies. myChEMBL consists of a Linux (Ubuntu) Virtual Machine featuring a PostgreSQL schema with the latest version of the ChEMBL database, as well as the latest RDKit cheminformatics libraries. In addition, a self-contained web interface is available, which can be modified and improved according to user specifications. The VM is available at: ftp://ftp.ebi.ac.uk/pub/databases/chembl/VM/myChEMBL/current. The web interface and web services code is available at: https://github.com/rochoa85/myChEMBL.

Compilation of small ribosomal subunit RNA structures.

PubMed Central

Neefs, J M; Van de Peer, Y; De Rijk, P; Chapelle, S; De Wachter, R

1993-01-01

The database on small ribosomal subunit RNA structure contained 1804 nucleotide sequences on April 23, 1993. This number comprises 365 eukaryotic, 65 archaeal, 1260 bacterial, 30 plastidial, and 84 mitochondrial sequences. These are stored in the form of an alignment in order to facilitate the use of the database as input for comparative studies on higher-order structure and for reconstruction of phylogenetic trees. The elements of the postulated secondary structure for each molecule are indicated by special symbols. The database is available on-line directly from the authors by ftp and can also be obtained from the EMBL nucleotide sequence library by electronic mail, ftp, and on CD ROM disk. PMID:8332525

Remediation of the protein data bank archive

PubMed Central

Henrick, Kim; Feng, Zukang; Bluhm, Wolfgang F.; Dimitropoulos, Dimitris; Doreleijers, Jurgen F.; Dutta, Shuchismita; Flippen-Anderson, Judith L.; Ionides, John; Kamada, Chisa; Krissinel, Eugene; Lawson, Catherine L.; Markley, John L.; Nakamura, Haruki; Newman, Richard; Shimizu, Yukiko; Swaminathan, Jawahar; Velankar, Sameer; Ory, Jeramia; Ulrich, Eldon L.; Vranken, Wim; Westbrook, John; Yamashita, Reiko; Yang, Huanwang; Young, Jasmine; Yousufuddin, Muhammed; Berman, Helen M.

2008-01-01

The Worldwide Protein Data Bank (wwPDB; wwpdb.org) is the international collaboration that manages the deposition, processing and distribution of the PDB archive. The online PDB archive at ftp://ftp.wwpdb.org is the repository for the coordinates and related information for more than 47 000 structures, including proteins, nucleic acids and large macromolecular complexes that have been determined using X-ray crystallography, NMR and electron microscopy techniques. The members of the wwPDB–RCSB PDB (USA), MSD-EBI (Europe), PDBj (Japan) and BMRB (USA)–have remediated this archive to address inconsistencies that have been introduced over the years. The scope and methods used in this project are presented. PMID:18073189

Integrated calibration of multiview phase-measuring profilometry

NASA Astrophysics Data System (ADS)

Lee, Yeong Beum; Kim, Min H.

2017-11-01

Phase-measuring profilometry (PMP) measures per-pixel height information of a surface with high accuracy. Height information captured by a camera in PMP relies on its screen coordinates. Therefore, a PMP measurement from a view cannot be integrated directly to other measurements from different views due to the intrinsic difference of the screen coordinates. In order to integrate multiple PMP scans, an auxiliary calibration of each camera's intrinsic and extrinsic properties is required, in addition to principal PMP calibration. This is cumbersome and often requires physical constraints in the system setup, and multiview PMP is consequently rarely practiced. In this work, we present a novel multiview PMP method that yields three-dimensional global coordinates directly so that three-dimensional measurements can be integrated easily. Our PMP calibration parameterizes intrinsic and extrinsic properties of the configuration of both a camera and a projector simultaneously. It also does not require any geometric constraints on the setup. In addition, we propose a novel calibration target that can remain static without requiring any mechanical operation while conducting multiview calibrations, whereas existing calibration methods require manually changing the target's position and orientation. Our results validate the accuracy of measurements and demonstrate the advantages on our multiview PMP.

Detection, location, and quantification of structural damage by neural-net-processed moiré profilometry

NASA Astrophysics Data System (ADS)

Grossman, Barry G.; Gonzalez, Frank S.; Blatt, Joel H.; Hooker, Jeffery A.

1992-03-01

The development of efficient high speed techniques to recognize, locate, and quantify damage is vitally important for successful automated inspection systems such as ones used for the inspection of undersea pipelines. Two critical problems must be solved to achieve these goals: the reduction of nonuseful information present in the video image and automatic recognition and quantification of extent and location of damage. Artificial neural network processed moire profilometry appears to be a promising technique to accomplish this. Real time video moire techniques have been developed which clearly distinguish damaged and undamaged areas on structures, thus reducing the amount of extraneous information input into an inspection system. Artificial neural networks have demonstrated advantages for image processing, since they can learn the desired response to a given input and are inherently fast when implemented in hardware due to their parallel computing architecture. Video moire images of pipes with dents of different depths were used to train a neural network, with the desired output being the location and severity of the damage. The system was then successfully tested with a second series of moire images. The techniques employed and the results obtained are discussed.

A cavity ring-down spectroscopy sensor for real-time Hall thruster erosion measurements.

PubMed

Lee, B C; Huang, W; Tao, L; Yamamoto, N; Gallimore, A D; Yalin, A P

2014-05-01

A continuous-wave cavity ring-down spectroscopy sensor for real-time measurements of sputtered boron from Hall thrusters has been developed. The sensor uses a continuous-wave frequency-quadrupled diode laser at 250 nm to probe ground state atomic boron sputtered from the boron nitride insulating channel. Validation results from a controlled setup using an ion beam and target showed good agreement with a simple finite-element model. Application of the sensor for measurements of two Hall thrusters, the H6 and SPT-70, is described. The H6 was tested at power levels ranging from 1.5 to 10 kW. Peak boron densities of 10 ± 2 × 10(14) m(-3) were measured in the thruster plume, and the estimated eroded channel volume agreed within a factor of 2 of profilometry. The SPT-70 was tested at 600 and 660 W, yielding peak boron densities of 7.2 ± 1.1 × 10(14) m(-3), and the estimated erosion rate agreed within ~20% of profilometry. Technical challenges associated with operating a high-finesse cavity in the presence of energetic plasma are also discussed.

Telecentric 3D profilometry based on phase-shifting fringe projection.

PubMed

Li, Dong; Liu, Chunyang; Tian, Jindong

2014-12-29

Three dimensional shape measurement in the microscopic range becomes increasingly important with the development of micro manufacturing technology. Microscopic fringe projection techniques offer a fast, robust, and full-field measurement for field sizes from approximately 1 mm² to several cm². However, the depth of field is very small due to the imaging of non-telecentric microscope, which is often not sufficient to measure the complete depth of a 3D-object. And the calibration of phase-to-depth conversion is complicated which need a precision translation stage and a reference plane. In this paper, we propose a novel telecentric phase-shifting projected fringe profilometry for small and thick objects. Telecentric imaging extends the depth of field approximately to millimeter order, which is much larger than that of microscopy. To avoid the complicated phase-to-depth conversion in microscopic fringe projection, we develop a new system calibration method of camera and projector based on telecentric imaging model. Based on these, a 3D reconstruction of telecentric imaging is presented with stereovision aided by fringe phase maps. Experiments demonstrated the feasibility and high measurement accuracy of the proposed system for thick object.

In situ measurement on TSV-Cu deformation with hotplate system based on sheet resistance

NASA Astrophysics Data System (ADS)

Sun, Yunna; Wang, Bo; Wang, Huiying; Wu, Kaifeng; Yang, Shengyong; Wang, Yan; Ding, Guifu

2017-12-01

The in situ measurement of TSVs deformation at different temperature is meaningful for learning more about the thermal deformation schemes of 3D TSVs in the microelectronic devices. An efficient and smart hotplate based on sheet resistance is designed for offering more heat, producing a uniform temperature distribution, relieving thermal stress and heat concentration issues, and reducing room space, which was optimized by the finite element method (FEM). The fabricated hotplate is efficient and smart (2.5 cm  ×  2.0 cm  ×  0.5 cm) enough to be located in the limited space during measuring. The thermal infrared imager was employed as the temperature sensor for monitoring the temperature distribution of TSVs sample. The 3D profilometry was adopted as the observer for TSVs profiles survey. The in situ 2D top surface profiles and 3D displacement profiles of TSVs sample at the different temperature were measured by 3D profilometer. The in situ average relative deformation and effective plastic deformation of the TSV sample were measured. With optical measurement method, 3D profilometry, the TSV sample can be tested repeatedly.

Studies of worn surfaces by relocation profilometry

NASA Astrophysics Data System (ADS)

Rîpă, M.; Iliuță, V.

2018-01-01

By relocation profilometry, a series of surface profiles can be recorded from the same track on a specimen. These techniques are used for monitoring specific particular points on the surface subjected to wear processes, in a more accurate manner as comparing to those involving average statistical information for surface. The method is providing a much more significant information about the surface, in a more efficient way, assuring that the same unworn investigated surface is studied after wear test. The studied roughness digital profiles were obtained before and after the testing of rolling/sliding line contacts, characteristic for spur gears, which has been simulated on SAE sets, with a two rollers test machine. The acquisition of the relocated profiles is performed on the same generatrix of the roller, before and after wear testing. To correlate the unworn and worn profiles, a spheroconical indentation was created on the circumferential surface of the disk, in the zone of the tested roller that remain unworn during the test. Measuring changes of the profiles by relocation techniques, two methods for wear assessment are presented: linear wear estimation by simulating the profile wearing and estimation of the volume wear.

Detailed analysis of an optimized FPP-based 3D imaging system

NASA Astrophysics Data System (ADS)

Tran, Dat; Thai, Anh; Duong, Kiet; Nguyen, Thanh; Nehmetallah, Georges

2016-05-01

In this paper, we present detail analysis and a step-by-step implementation of an optimized fringe projection profilometry (FPP) based 3D shape measurement system. First, we propose a multi-frequency and multi-phase shifting sinusoidal fringe pattern reconstruction approach to increase accuracy and sensitivity of the system. Second, phase error compensation caused by the nonlinear transfer function of the projector and camera is performed through polynomial approximation. Third, phase unwrapping is performed using spatial and temporal techniques and the tradeoff between processing speed and high accuracy is discussed in details. Fourth, generalized camera and system calibration are developed for phase to real world coordinate transformation. The calibration coefficients are estimated accurately using a reference plane and several gauge blocks with precisely known heights and by employing a nonlinear least square fitting method. Fifth, a texture will be attached to the height profile by registering a 2D real photo to the 3D height map. The last step is to perform 3D image fusion and registration using an iterative closest point (ICP) algorithm for a full field of view reconstruction. The system is experimentally constructed using compact, portable, and low cost off-the-shelf components. A MATLAB® based GUI is developed to control and synchronize the whole system.

Effect of ceramic thickness, grinding, and aging on the mechanical behavior of a polycrystalline zirconia.

PubMed

Prado, Rodrigo Diniz; Pereira, Gabriel Kalil Rocha; Bottino, Marco Antonio; Melo, Renata Marques de; Valandro, Luiz Felipe

2017-11-06

Monolithic restorations of Y-TZP have been recommended as a restorative alternative on prosthetic dentistry as it allows a substantial reduction of ceramic thickness, which means a greater preservation of tooth structure. However, the influence of grinding and aging when using a thinner layer of the material is unclear. This investigation aimed to evaluate and compare the effects of ceramic thickness (0.5 mm and 1.0 mm), grinding and aging (low-temperature degradation) on the mechanical behavior and surface characteristics of a full-contour Y-TZP ceramic. Y-TZP disc-shaped specimens (15 mm diameter) were manufactured with both thicknesses and randomly assigned into 4 groups considering the factors 'grinding with diamond bur' and 'aging in autoclave'. Surface topography (roughness, 3D profilometry and SEM), phase transformation, flexural strength and structural reliability (Weibull) analyses were executed. Grinding affected the surface topography, while aging did not promote any effect. An increase in m-phase content was observed after grinding and aging, although different susceptibilities were observed. Regardless of zirconia's thickness, no deleterious effect of grinding or aging on the mechanical properties was observed. Thus, in our testing assembly, reducing the thickness of the Y-TZP ceramic did not alter its response to grinding and low temperature degradation and did not impair its mechanical performance.

Surface micro-structuring of silicon by excimer-laser irradiation in reactive atmospheres

NASA Astrophysics Data System (ADS)

Pedraza, A. J.; Fowlkes, J. D.; Jesse, S.; Mao, C.; Lowndes, D. H.

2000-12-01

The formation mechanisms of cones and columns by pulsed-laser irradiation in reactive atmospheres were studied using scanning electron microscopy and profilometry. Deep etching takes place in SF6- and O2- rich atmospheres and consequently, silicon-containing molecules and clusters are released. Transport of silicon from the etched/ablated regions to the tip of columns and cones and to the side of the cones is required because both structures, columns and cones, protrude above the initial surface. The laser-induced micro-structure is influenced not only by the nature but also by the partial pressure of the reactive gas in the atmosphere. Irradiation in Ar following cone formation in SF6 produced no additional growth but rather melting and resolidification. Subsequent irradiation using again a SF6 atmosphere lead to cone restructuring and growth resumption. Thus the effects of etching plus re-deposition that produce column/cone formation and growth are clearly separated from the effects of just melting. On the other hand, irradiation continued in air after first performed in SF6 resulted in: (a) an intense etching of the cones and a tendency to transform them into columns; (b) growth of new columns on top of the existing cones and (c) filamentary nano-structures coating the sides of the columns and cones.

The susceptibility of Staphylococcus aureus CIP 65.8 and Pseudomonas aeruginosa ATCC 9721 cells to the bactericidal action of nanostructured Calopteryx haemorrhoidalis damselfly wing surfaces.

PubMed

Truong, Vi Khanh; Geeganagamage, Nipuni Mahanamanam; Baulin, Vladimir A; Vongsvivut, Jitraporn; Tobin, Mark J; Luque, Pere; Crawford, Russell J; Ivanova, Elena P

2017-06-01

Nanostructured insect wing surfaces have been reported to possess the ability to resist bacterial colonization through the mechanical rupture of bacterial cells coming into contact with the surface. In this work, the susceptibility of physiologically young, mature and old Staphylococcus aureus CIP 65.8 and Pseudomonas aeruginosa ATCC 9721 bacterial cells, to the action of the bactericidal nano-pattern of damselfly Calopteryx haemorrhoidalis wing surfaces, was investigated. The results were obtained using several surface characterization techniques including optical profilometry, scanning electron microscopy, synchrotron-sourced Fourier transform infrared microspectroscopy, water contact angle measurements and antibacterial assays. The data indicated that the attachment propensity of physiologically young S. aureus CIP 65.8 T and mature P. aeruginosa ATCC 9721 bacterial cells was greater than that of the cells at other stages of growth. Both the S. aureus CIP 65.8 T and P. aeruginosa ATCC 9721 cells, grown at the early (1 h) and late stationary phase (24 h), were found to be most susceptible to the action of the wings, with up to 89.7 and 61.3% as well as 97.9 and 97.1% dead cells resulting from contact with the wing surface, respectively.

Bio-active glass air-abrasion has the potential to remove resin composite restorative material selectively

NASA Astrophysics Data System (ADS)

Milly, Hussam; Andiappan, Manoharan; Thompson, Ian; Banerjee, Avijit

2014-06-01

The aims of this study were to assess: (a) the chemistry, morphology and bioactivity of bio-active glass (BAG) air-abrasive powder, (b) the effect of three air-abrasion operating parameters: air pressure, powder flow rate (PFR) and the abrasive powder itself, on the selective removal of resin composite and (c) the required "time taken". BAG abrasive particles were characterised using scanning electron microscopy-energy dispersive X-ray spectrometry (SEM-EDX) and Fourier-transform infrared spectroscopy (FTIR). Standardised resin composite restorations created within an enamel analogue block (Macor™) in vitro, were removed using air-abrasion undersimulated clinical conditions. 90 standardised cavities were scanned before and after resin composite removal using laser profilometry and the volume of the resulting 3D images calculated. Multilevel linear model was used to identify the significant factors affecting Macor™ removal. BAG powder removed resin composite more selectively than conventional air-abrasion alumina powder using the same operating parameters (p < 0.001) and the effect of altering the unit's operating parameters was significant (p < 0.001). In conclusion, BAG powder is more efficient than alumina in the selective removal of resin composite particularly under specific operating parameters, and therefore may be recommended clinically as a method of preserving sound enamel structure when repairing and removing defective resin composite restorations.

Efficient Rutin and Quercetin Biosynthesis through Flavonoids-Related Gene Expression in Fagopyrum tataricum Gaertn. Hairy Root Cultures with UV-B Irradiation

PubMed Central

Huang, Xuan; Yao, Jingwen; Zhao, Yangyang; Xie, Dengfeng; Jiang, Xue; Xu, Ziqin

2016-01-01

Transformed hairy roots had been efficiently induced from the seedlings of Fagopyrum tataricum Gaertn. due to the infection of Agrobacterium rhizogenes. Hairy roots were able to display active elongation with high root branching in 1/2 MS medium without growth regulators. The stable introduction of rolB and aux1 genes of A. rhizogenes WT strain 15834 into F. tataricum plants was confirmed by PCR analysis. Besides, the absence of virD gene confirmed hairy root was bacteria-free. After six different media and different sources of concentration were tested, the culturing of TB7 hairy root line in 1/2 MS liquid medium supplemented with 30 g l-1 sucrose for 20 days resulted in a maximal biomass accumulation (13.5 g l-1 fresh weight, 1.78 g l-1 dry weight) and rutin content (0.85 mg g-1). The suspension culture of hairy roots led to a 45-fold biomass increase and a 4.11-fold rutin content increase in comparison with the suspension culture of non-transformed roots. The transformation frequency was enhanced through preculturing for 2 days followed by infection for 20 min. The UV-B stress treatment of hairy roots resulted in a striking increase of rutin and quercetin production. Furthermore, the hairy root lines of TB3, TB7, and TB28 were chosen to study the specific effects of UV-B on flavonoid accumulation and flavonoid biosynthetic gene expression by qRT-PCR. This study has demonstrated that the UV-B radiation was an effective elicitor that dramatically changed in the transcript abundance of ftpAL, FtCHI, FtCHS, FtF3H, and FtFLS-1 in F. tataricum hairy roots. PMID:26870075

Consensus coding sequence (CCDS) database: a standardized set of human and mouse protein-coding regions supported by expert curation

PubMed Central

Pujar, Shashikant; O’Leary, Nuala A; Farrell, Catherine M; Mudge, Jonathan M; Wallin, Craig; Diekhans, Mark; Barnes, If; Bennett, Ruth; Berry, Andrew E; Cox, Eric; Davidson, Claire; Goldfarb, Tamara; Gonzalez, Jose M; Hunt, Toby; Jackson, John; Joardar, Vinita; Kay, Mike P; Kodali, Vamsi K; McAndrews, Monica; McGarvey, Kelly M; Murphy, Michael; Rajput, Bhanu; Rangwala, Sanjida H; Riddick, Lillian D; Seal, Ruth L; Webb, David; Zhu, Sophia; Aken, Bronwen L; Bult, Carol J; Frankish, Adam; Pruitt, Kim D

2018-01-01

Abstract The Consensus Coding Sequence (CCDS) project provides a dataset of protein-coding regions that are identically annotated on the human and mouse reference genome assembly in genome annotations produced independently by NCBI and the Ensembl group at EMBL-EBI. This dataset is the product of an international collaboration that includes NCBI, Ensembl, HUGO Gene Nomenclature Committee, Mouse Genome Informatics and University of California, Santa Cruz. Identically annotated coding regions, which are generated using an automated pipeline and pass multiple quality assurance checks, are assigned a stable and tracked identifier (CCDS ID). Additionally, coordinated manual review by expert curators from the CCDS collaboration helps in maintaining the integrity and high quality of the dataset. The CCDS data are available through an interactive web page (https://www.ncbi.nlm.nih.gov/CCDS/CcdsBrowse.cgi) and an FTP site (ftp://ftp.ncbi.nlm.nih.gov/pub/CCDS/). In this paper, we outline the ongoing work, growth and stability of the CCDS dataset and provide updates on new collaboration members and new features added to the CCDS user interface. We also present expert curation scenarios, with specific examples highlighting the importance of an accurate reference genome assembly and the crucial role played by input from the research community. PMID:29126148

Predictors of fitness to practise declarations in UK medical undergraduates.

PubMed

Paton, Lewis W; Tiffin, Paul A; Smith, Daniel; Dowell, Jon S; Mwandigha, Lazaro M

2018-04-05

Misconduct during medical school predicts subsequent fitness to practise (FtP) events in doctors, but relatively little is known about which factors are associated with such issues during undergraduate education. This study exploits the newly created UK medical education database (UKMED), with the aim of identifying predictors of conduct or health-related issues that could potentially impair FtP. The findings would have implications for policies related to both the selection and support of medical students. Data were available for 14,379 students obtaining provisional registration with the General Medical Council who started medical school in 2007 and 2008. FtP declarations made by students were available, as were various educational and demographic predictor variables, including self-report 'personality measures' for students who participated in UK Clinical Aptitude Test (UKCAT) pilot studies. Univariable and multivariable logistic regression models were developed to evaluate the predictors of FtP declarations. Significant univariable predictors (p < 0.05) for conduct-related declarations included male gender, white ethnicity and a non-professional parental background. Male gender (OR 3.07) and higher 'self-esteem' (OR 1.45) were independently associated with an increased risk of a conduct issue. Female gender, a non-professional background, and lower self-reported 'confidence' were, among others, associated with increased odds of a health-related declaration. Only 'confidence' was a significant independent predictor of a health declaration (OR 0.69). Female gender, higher UKCAT score, a non-professional background and lower 'confidence' scores were significant predictors of reported depression, and the latter two variables were independent predictors of declared depression. White ethnicity and UK nationality were associated with increased odds of both conduct and health-related declarations, as were certain personality traits. Students from non-professional backgrounds may be at increased risk of depression and therefore could benefit from targeted support. The small effect sizes observed for the 'personality measures' suggest they would offer little potential benefit for selection, over and above those measures already in use.

Reflection on fitness to practise.

PubMed

Brindley, J

2016-10-21

Aim The focus of this review was to identify the role of reflection in continuing dental education. By understanding the expectations that our statutory regulative authority has of their registrants there is an opportunity to help to shape the continued professional development activities undertaken by current registrants in the future.Objective Conduct a review of General Dental Council (GDC) Fitness to Practise cases which were given conditions (restrictions) between February 2012 and November 2015, identifying relevant emergent outcomes in relation the Fitness to Practise (FTP) process.Design A Framework Approach (FA) was used to interrogate the qualitative data generated from GDC cases, the data were reviewed by a secondary person to ensure inter-rater reliability. Ethical approval was not sought for this research project as the GDC cases are published and available for open access via the internet. However, this does not negate the need for consideration of those GDC registrants who have been reviewed by the FTP process, indeed information regarding their identities was removed during data collection, as individual identification as part of this research project may have impacted on these individuals (bearing in mind the principle of non-maleficence; do no harm) and disclosure of personal information would not have contributed to the findings of this review. Although FTP cases are in the public domain, the information is still sensitive to those registrants, therefore it was not possible to review those cases which were not available for public view. To ensure that individual identification of registrants did not occur for the available to view cases (n = 56), each case file was individually downloaded from the GDC website and immediately given an individual numerical identifier before the frame work analysis. For the purpose of this research only the data from the FTP cases which resulted in 'conditions' were subject to review, as these were cases where it was felt that the registrants were able to remedy their personal professional practices.

Black carbon emissions in gasoline exhaust and a reduction alternative with a gasoline particulate filter.

PubMed

Chan, Tak W; Meloche, Eric; Kubsh, Joseph; Brezny, Rasto

2014-05-20

Black carbon (BC) mass and solid particle number emissions were obtained from two pairs of gasoline direct injection (GDI) vehicles and port fuel injection (PFI) vehicles over the U.S. Federal Test Procedure 75 (FTP-75) and US06 Supplemental Federal Test Procedure (US06) drive cycles on gasoline and 10% by volume blended ethanol (E10). BC solid particles were emitted mostly during cold-start from all GDI and PFI vehicles. The reduction in ambient temperature had significant impacts on BC mass and solid particle number emissions, but larger impacts were observed on the PFI vehicles than the GDI vehicles. Over the FTP-75 phase 1 (cold-start) drive cycle, the BC mass emissions from the two GDI vehicles at 0 °F (-18 °C) varied from 57 to 143 mg/mi, which was higher than the emissions at 72 °F (22 °C; 12-29 mg/mi) by a factor of 5. For the two PFI vehicles, the BC mass emissions over the FTP-75 phase 1 drive cycle at 0 °F varied from 111 to 162 mg/mi, higher by a factor of 44-72 when compared to the BC emissions of 2-4 mg/mi at 72 °F. The use of a gasoline particulate filter (GPF) reduced BC emissions from the selected GDI vehicle by 73-88% at various ambient temperatures over the FTP-75 phase 1 drive cycle. The ambient temperature had less of an impact on particle emissions for a warmed-up engine. Over the US06 drive cycle, the GPF reduced BC mass emissions from the GDI vehicle by 59-80% at various temperatures. E10 had limited impact on BC emissions from the selected GDI and PFI vehicles during hot-starts. E10 was found to reduce BC emissions from the GDI vehicle by 15% at standard temperature and by 75% at 19 °F (-7 °C).

Characterization and measurement of polymer wear

NASA Technical Reports Server (NTRS)

Buckley, D. H.; Aron, P. R.

1984-01-01

Analytical tools which characterize the polymer wear process are discussed. The devices discussed include: visual observation of polymer wear with SEM, the quantification with surface profilometry and ellipsometry, to study the chemistry with AES, XPS and SIMS, to establish interfacial polymer orientation and accordingly bonding with QUARTIR, polymer state with Raman spectroscopy and stresses that develop in polymer films using a X-ray double crystal camera technique.

Wear behavior of austenite containing plate steels

NASA Astrophysics Data System (ADS)

Hensley, Christina E.

As a follow up to Wolfram's Master of Science thesis, samples from the prior work were further investigated. Samples from four steel alloys were selected for investigation, namely AR400F, 9260, Hadfield, and 301 Stainless steels. AR400F is martensitic while the Hadfield and 301 stainless steels are austenitic. The 9260 exhibited a variety of hardness levels and retained austenite contents, achieved by heat treatments, including quench and tempering (Q&T) and quench and partitioning (Q&P). Samples worn by three wear tests, namely Dry Sand/Rubber Wheel (DSRW), impeller tumbler impact abrasion, and Bond abrasion, were examined by optical profilometry. The wear behaviors observed in topography maps were compared to the same in scanning electron microscopy micrographs and both were used to characterize the wear surfaces. Optical profilometry showed that the scratching abrasion present on the wear surface transitioned to gouging abrasion as impact conditions increased (i.e. from DSRW to impeller to Bond abrasion). Optical profilometry roughness measurements were also compared to sample hardness as well as normalized volume loss (NVL) results for each of the three wear tests. The steels displayed a relationship between roughness measurements and observed wear rates for all three categories of wear testing. Nanoindentation was used to investigate local hardness changes adjacent to the wear surface. DSRW samples generally did not exhibit significant work hardening. The austenitic materials exhibited significant hardening under the high impact conditions of the Bond abrasion wear test. Hardening in the Q&P materials was less pronounced. The Q&T microstructures also demonstrated some hardening. Scratch testing was performed on samples at three different loads, as a more systematic approach to determining the scratching abrasion behavior. Wear rates and scratch hardness were calculated from scratch testing results. Certain similarities between wear behavior in scratch testing and DSRW samples were observed. Different microstructures exhibited different scratching behaviors. Martensitic microstructures exhibited chipping and cracking, whereas Q&P microstructures exhibited limited or no chipping. The Q&P samples exhibited more deformation at greater loads and hardness levels than the martensitic microstructures. Austenitic microstructures exhibited significant deformation adjacent to the scratches.

A new code SORD for simulation of polarized light scattering in the Earth atmosphere

NASA Astrophysics Data System (ADS)

Korkin, Sergey; Lyapustin, Alexei; Sinyuk, Aliaksandr; Holben, Brent

2016-05-01

We report a new publicly available radiative transfer (RT) code for numerical simulation of polarized light scattering in plane-parallel Earth atmosphere. Using 44 benchmark tests, we prove high accuracy of the new RT code, SORD (Successive ORDers of scattering1, 2). We describe capabilities of SORD and show run time for each test on two different machines. At present, SORD is supposed to work as part of the Aerosol Robotic NETwork3 (AERONET) inversion algorithm. For natural integration with the AERONET software, SORD is coded in Fortran 90/95. The code is available by email request from the corresponding (first) author or from ftp://climate1.gsfc.nasa.gov/skorkin/SORD/ or ftp://maiac.gsfc.nasa.gov/pub/SORD.zip

Throughfall Displacement Experiment (TDE) Ecosystem Model Intercomparison Project Data Archive

DOE Data Explorer

Hanson, Paul J. [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (USA); Amthor, Jeffrey S. [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (USA); Baldocchi, Dennis D. [University of California, Berkeley; Grant, Robert F. [University of Alberta, Canada; Hartley, Anne E. [Ohio State University; Hui, Dafeng [University of Oklahoma; Hunt, Jr., E. Raymond [Agricultural Research Service, U.S. Department of Agriculture; Johnson, Dale W. [University of Nevada, Reno; Kimball, John S. [University of Montana; King, Anthony W. [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (USA); Luo, Yiqi [University of Oklahoma; McNulty, Steven G. [Southern Global Change Program, U.S. Forest Service, U.S. Department of Agriculture; Sun, Ge [North Carolina State University, Raleigh, NC (USA); Thornton, Peter E. [University of Montana; Wang, Shusen [Geomatics Canada - Canada Centre for Remote Sensing Natural Resources, Canada; Williams, Matthew [University of Edinburgh, United Kingdom; Wilson, Kell B. [National Oceanic and Atmospheric Administration, U.S. Department of Commerce; Wullschleger, Stanley D. [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (USA)

2002-08-01

This archive provides and documents data from a project whose purpose is to compare the output of various ecosystem models when they are run with the data from the Throughfall Displacement Experiment (TDE) at Walker Branch Watershed, Oak Ridge, Tennessee. The project is not designed to determine which models are "best" for diagnosis (i.e., explaining the current functioning of the system) or prognosis (i.e., predicting the response of the system to future conditions), but, rather, to clarify similarities and differences among the models and their components, so that all models can be improved. Data archive: ftp://cdiac.ornl.gov/ftp/tdemodel/. TDE data archive web site: http://cdiac.ess-dive.lbl.gov/epubs/ndp/ndp078a/ndp078a.html.

Pattern Discovery and Change Detection of Online Music Query Streams

NASA Astrophysics Data System (ADS)

Li, Hua-Fu

In this paper, an efficient stream mining algorithm, called FTP-stream (Frequent Temporal Pattern mining of streams), is proposed to find the frequent temporal patterns over melody sequence streams. In the framework of our proposed algorithm, an effective bit-sequence representation is used to reduce the time and memory needed to slide the windows. The FTP-stream algorithm can calculate the support threshold in only a single pass based on the concept of bit-sequence representation. It takes the advantage of "left" and "and" operations of the representation. Experiments show that the proposed algorithm only scans the music query stream once, and runs significant faster and consumes less memory than existing algorithms, such as SWFI-stream and Moment.

FTP-Server for exchange, interpretation, and database-search of ion mobility spectra, literature, preprints and software

NASA Technical Reports Server (NTRS)

Baumbach, J. I.; Vonirmer, A.

1995-01-01

To assist current discussion in the field of ion mobility spectrometry, at the Institut fur Spectrochemie und angewandte Spektroskopie, Dortmund, start with 4th of December, 1994 work of an FTP-Server, available for all research groups at univerisities, institutes and research worker in industry. We support the exchange, interpretation, and database-search of ion mobility spectra through data format JCAMP-DS (Joint Committee on Atomic and Molecular Physical Data) as well as literature retrieval, pre-print, notice, and discussion board. We describe in general lines the entrance conditions, local addresses, and main code words. For further details, a monthly news report will be prepared for all common users. Internet email address for subscribing is included in document.

The FELICIA bulletin board system and the IRBIS anonymous FTP server: Computer security information sources for the DOE community. CIAC-2302

DOE Office of Scientific and Technical Information (OSTI.GOV)

Orvis, W.J.

1993-11-03

The Computer Incident Advisory Capability (CIAC) operates two information servers for the DOE community, FELICIA (formerly FELIX) and IRBIS. FELICIA is a computer Bulletin Board System (BBS) that can be accessed by telephone with a modem. IRBIS is an anonymous ftp server that can be accessed on the Internet. Both of these servers contain all of the publicly available CIAC, CERT, NIST, and DDN bulletins, virus descriptions, the VIRUS-L moderated virus bulletin board, copies of public domain and shareware virus- detection/protection software, and copies of useful public domain and shareware utility programs. This guide describes how to connect these systemsmore » and obtain files from them.« less

Whole Genome Sequence of Two Wild-Derived Mus musculus domesticus Inbred Strains, LEWES/EiJ and ZALENDE/EiJ, with Different Diploid Numbers

PubMed Central

Morgan, Andrew P.; Didion, John P.; Doran, Anthony G.; Holt, James M.; McMillan, Leonard; Keane, Thomas M.; de Villena, Fernando Pardo-Manuel

2016-01-01

Wild-derived mouse inbred strains are becoming increasingly popular for complex traits analysis, evolutionary studies, and systems genetics. Here, we report the whole-genome sequencing of two wild-derived mouse inbred strains, LEWES/EiJ and ZALENDE/EiJ, of Mus musculus domesticus origin. These two inbred strains were selected based on their geographic origin, karyotype, and use in ongoing research. We generated 14× and 18× coverage sequence, respectively, and discovered over 1.1 million novel variants, most of which are private to one of these strains. This report expands the number of wild-derived inbred genomes in the Mus genus from six to eight. The sequence variation can be accessed via an online query tool; variant calls (VCF format) and alignments (BAM format) are available for download from a dedicated ftp site. Finally, the sequencing data have also been stored in a lossless, compressed, and indexed format using the multi-string Burrows-Wheeler transform. All data can be used without restriction. PMID:27765810

Consensus coding sequence (CCDS) database: a standardized set of human and mouse protein-coding regions supported by expert curation.

PubMed

Pujar, Shashikant; O'Leary, Nuala A; Farrell, Catherine M; Loveland, Jane E; Mudge, Jonathan M; Wallin, Craig; Girón, Carlos G; Diekhans, Mark; Barnes, If; Bennett, Ruth; Berry, Andrew E; Cox, Eric; Davidson, Claire; Goldfarb, Tamara; Gonzalez, Jose M; Hunt, Toby; Jackson, John; Joardar, Vinita; Kay, Mike P; Kodali, Vamsi K; Martin, Fergal J; McAndrews, Monica; McGarvey, Kelly M; Murphy, Michael; Rajput, Bhanu; Rangwala, Sanjida H; Riddick, Lillian D; Seal, Ruth L; Suner, Marie-Marthe; Webb, David; Zhu, Sophia; Aken, Bronwen L; Bruford, Elspeth A; Bult, Carol J; Frankish, Adam; Murphy, Terence; Pruitt, Kim D

2018-01-04

The Consensus Coding Sequence (CCDS) project provides a dataset of protein-coding regions that are identically annotated on the human and mouse reference genome assembly in genome annotations produced independently by NCBI and the Ensembl group at EMBL-EBI. This dataset is the product of an international collaboration that includes NCBI, Ensembl, HUGO Gene Nomenclature Committee, Mouse Genome Informatics and University of California, Santa Cruz. Identically annotated coding regions, which are generated using an automated pipeline and pass multiple quality assurance checks, are assigned a stable and tracked identifier (CCDS ID). Additionally, coordinated manual review by expert curators from the CCDS collaboration helps in maintaining the integrity and high quality of the dataset. The CCDS data are available through an interactive web page (https://www.ncbi.nlm.nih.gov/CCDS/CcdsBrowse.cgi) and an FTP site (ftp://ftp.ncbi.nlm.nih.gov/pub/CCDS/). In this paper, we outline the ongoing work, growth and stability of the CCDS dataset and provide updates on new collaboration members and new features added to the CCDS user interface. We also present expert curation scenarios, with specific examples highlighting the importance of an accurate reference genome assembly and the crucial role played by input from the research community. Published by Oxford University Press on behalf of Nucleic Acids Research 2017.

National RCRA Hazardous Waste Biennial Report Data Files

EPA Pesticide Factsheets

The United States Environmental Protection Agency (EPA), in cooperation with the States, biennially collects information regarding the generation, management, and final disposition of hazardous wastes regulated under the Resource Conservation and Recovery Act of 1976 (RCRA), as amended. Collection, validation and verification of the Biennial Report (BR) data is the responsibility of RCRA authorized states and EPA regions. EPA does not modify the data reported by the states or regions. Any questions regarding the information reported for a RCRA handler should be directed to the state agency or region responsible for the BR data collection. BR data are collected every other year (odd-numbered years) and submitted in the following year. The BR data are used to support regulatory activities and provide basic statistics and trend of hazardous waste generation and management. BR data is available to the public through 3 mechanisms. 1. The RCRAInfo website includes data collected from 2001 to present-day (https://rcrainfo.epa.gov/rcrainfoweb/action/main-menu/view). Users of the RCRAInfo website can run queries and output reports for different data collection years at this site. All BR data collected from 2001 to present-day is stored in RCRAInfo, and is accessible through this website. 2. An FTP site allows users to access BR data files collected from 1999 - present day (ftp://ftp.epa.gov/rcrainfodata/). Zip files are available for download directly from this

SEGY to ASCII: Conversion and Plotting Program

USGS Publications Warehouse

Goldman, Mark R.

1999-01-01

This report documents a computer program to convert standard 4 byte, IBM floating point SEGY files to ASCII xyz format. The program then optionally plots the seismic data using the GMT plotting package. The material for this publication is contained in a standard tar file (of99-126.tar) that is uncompressed and 726 K in size. It can be downloaded by any Unix machine. Move the tar file to the directory you wish to use it in, then type 'tar xvf of99-126.tar' The archive files (and diskette) contain a NOTE file, a README file, a version-history file, source code, a makefile for easy compilation, and an ASCII version of the documentation. The archive files (and diskette) also contain example test files, including a typical SEGY file along with the resulting ASCII xyz and postscript files. Requirements for compiling the source code into an executable are a C++ compiler. The program has been successfully compiled using Gnu's g++ version 2.8.1, and use of other compilers may require modifications to the existing source code. The g++ compiler is a free, high quality C++ compiler and may be downloaded from the ftp site: ftp://ftp.gnu.org/gnu Requirements for plotting the seismic data is the existence of the GMT plotting package. The GMT plotting package may be downloaded from the web site: http://www.soest.hawaii.edu/gmt/

Building an FTP guard

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sands, P.D.

1998-08-01

Classified designs usually include lesser classified (including unclassified) components. An engineer working on such a design needs access to the various sub-designs at lower classification levels. For simplicity, the problem is presented with only two levels: high and low. If the low-classification component designs are stored in the high network, they become inaccessible to persons working on a low network. In order to keep the networks separate, the component designs may be duplicated in all networks, resulting in a synchronization problem. Alternatively, they may be stored in the low network and brought into the high network when needed. The lattermore » solution results in the use of sneaker-net (copying the files from the low system to a tape and carrying the tape to a high system) or a file transfer guard. This paper shows how an FTP Guard was constructed and implemented without degrading the security of the underlying B3 platform. The paper then shows how the guard can be extended to an FTP proxy server or an HTTP proxy server. The extension is accomplished by allowing the high-side user to select among items that already exist on the low-side. No high-side data can be directly compromised by the extension, but a mechanism must be developed to handle the low-bandwidth covert channel that would be introduced by the application.« less

Grayscale imbalance correction in real-time phase measuring profilometry

NASA Astrophysics Data System (ADS)

Zhu, Lin; Cao, Yiping; He, Dawu; Chen, Cheng

2016-10-01

Grayscale imbalance correction in real-time phase measuring profilometry (RPMP) is proposed. In the RPMP, the sufficient information is obtained to reconstruct the 3D shape of the measured object in one over twenty-four of a second. Only one color fringe pattern whose R, G and B channels are coded as three sinusoidal phase-shifting gratings with an equivalent shifting phase of 2π/3 is sent to a flash memory on a specialized digital light projector (SDLP). And then the SDLP projects the fringe patterns in R, G and B channels sequentially onto the measured object in one over seventy-two of a second and meanwhile a monochrome CCD camera captures the corresponding deformed patterns synchronously with the SDLP. Because the deformed patterns from three color channels are captured at different time, the color crosstalk is avoided completely. But due to the monochrome CCD camera's different spectral sensitivity to R, G and B tricolor, there will be grayscale imbalance among these deformed patterns captured at R, G and B channels respectively which may result in increasing measuring errors or even failing to reconstruct the 3D shape. So a new grayscale imbalance correction method based on least square method is developed. The experimental results verify the feasibility of the proposed method.

Electrochemical properties of thin films of V2O5 doped with TiO2

NASA Astrophysics Data System (ADS)

Moura, E. A.; Cholant, C. M.; Balboni, R. D. C.; Westphal, T. M.; Lemos, R. M. J.; Azevedo, C. F.; Gündel, A.; Flores, W. H.; Gomez, J. A.; Ely, F.; Pawlicka, A.; Avellaneda, C. O.

2018-08-01

The paper presents a systematic study of the electrochromic properties of thin films of V2O5:TiO2 for a possible utilization as counter-electrode in electrochromic devices. The V2O5:TiO2 thin films were prepared by the sol-gel process and deposited on a substrate of fluorine-tin oxide transparent electrode (FTO) using the dip coating technique and heat treatment at 350 °C for 30 min. The films were characterized by chronocoulometry, cyclic voltammetry (CV), UV-Vis, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), atomic force microscopy (AFM), profilometry, and X-ray diffraction (XRD). The best results were obtained for the film of V2O5 with 7.5 mol% of TiO2, which presented highest ion storage capacity of ∼106 mC cm-2 and redox reversibility of 1. The diffusion of the Li+ ions into the thin films was modeled by solving Fick equations with appropriate boundary conditions for a plane sheet geometry. Besides that, these films showed optical modulation of 35% at 633 nm after coloration and bleaching. The XRD patterns revealed that the films have an orthorhombic crystal structure; the AFM and the profilometry confirmed roughness and thickness of 16.76 and 617 nm, respectively.

Antibacterial properties of chitosan-based coatings are affected by spacer-length and molecular weight

NASA Astrophysics Data System (ADS)

Vaz, Juliana M.; Taketa, Thiago B.; Hernandez-Montelongo, Jacobo; Chevallier, Pascale; Cotta, Monica A.; Mantovani, Diego; Beppu, Marisa M.

2018-07-01

Chitosan is a biopolymer with antibacterial properties, which are dependent on its molecular weight (Mw) and its degree of deacetylation (DDA). When grafted on surfaces as a coating, chitosan antibacterial efficiency is also dependent on the polymer chain conformation on the surface, as the amine groups, responsible of the antibacterial effect, should be available for contact with bacteria. To investigate this behavior, chitosans with different Mw were grafted onto plasma aminated surfaces through three different spacers: glutaric anhydride (GA), poly(ethylene-glycol) bis(carboxymethyl) ether (PEGb), and poly(ethylene-alt-maleic anhydride) (PA). The grafting efficiency was evaluated by X-ray Photoelectron Spectroscopy (XPS), contact angle and Rose Bengal test, while morphological features were assessed by profilometry analyses. Results evidenced a clear influence of the anchor arm length and of the Mw of chitosan both on the grafting efficiency and on the antibacterial behavior. PA CHIMW surface exhibited a better antibacterial response compared to GA and PEGb, which could be correlated to a denser coating coverage as seen by XPS and profilometry results. Further, PA CHIMW coating displayed a higher amine density, thus promoting the interaction with the bacteria cell wall. Based on these results, chitosan-based coatings can then be extended to a wide range of antibacterial applications.

Crankcase emissions with disabled PCV (positive crankcase ventilation) systems. Final report, September 1984-May 1985

DOE Office of Scientific and Technical Information (OSTI.GOV)

Montalvo, D.A.; Hare, C.T.

1985-03-01

The report describes the laboratory testing of nine in-use light-duty gasoline passenger cars using up to four PCV disablement configurations. The nine vehicles included 1975 to 1983 model years, with odometer readings generally between 20,000 and 60,000 miles. No two vehicles were identical in make and engine type, and engine displacements ranged from 89 to 403 cu in. The vehicles were tested over the 1975 Federal Test Procedure, with sampling for crankcase HC conducted during each individual cycle of the 3-bag FTP and during the 10-minute hot soak. Emissions of crankcase HC are provided in g/mi for the 3-bag FTP,more » and in g/min for the 10-minute soak.« less

Method and system for spatially variable rate application of agricultural chemicals based on remotely sensed vegetation data

NASA Technical Reports Server (NTRS)

Lewis, Mark David (Inventor); Seal, Michael R. (Inventor); Hood, Kenneth Brown (Inventor); Johnson, James William (Inventor)

2007-01-01

Remotely sensed spectral image data are used to develop a Vegetation Index file which represents spatial variations of actual crop vigor throughout a field that is under cultivation. The latter information is processed to place it in a format that can be used by farm personnel to correlate and calibrate it with actually observed crop conditions existing at control points within the field. Based on the results, farm personnel formulate a prescription request, which is forwarded via email or FTP to a central processing site, where the prescription is prepared. The latter is returned via email or FTP to on-side farm personnel, who can load it into a controller on a spray rig that directly applies inputs to the field at a spatially variable rate.

Method and apparatus for spatially variable rate application of agricultural chemicals based on remotely sensed vegetation data

NASA Technical Reports Server (NTRS)

Hood, Kenneth Brown (Inventor); Johnson, James William (Inventor); Seal, Michael R. (Inventor); Lewis, Mark David (Inventor)

2004-01-01

Remotely sensed spectral image data are used to develop a Vegetation Index file which represents spatial variations of actual crop vigor throughout a field that is under cultivation. The latter information is processed to place it in a format that can be used by farm personnel to correlate and calibrate it with actually observed crop conditions existing at control points within the field. Based on the results, farm personnel formulate a prescription request, which is forwarded via email or FTP to a central processing site, where the prescription is prepared. The latter is returned via email or FTP to on-side farm personnel, who can load it into a controller on a spray rig that directly applies inputs to the field at a spatially variable rate.

Detecting SNPs and estimating allele frequencies in clonal bacterial populations by sequencing pooled DNA.

PubMed

Holt, Kathryn E; Teo, Yik Y; Li, Heng; Nair, Satheesh; Dougan, Gordon; Wain, John; Parkhill, Julian

2009-08-15

Here, we present a method for estimating the frequencies of SNP alleles present within pooled samples of DNA using high-throughput short-read sequencing. The method was tested on real data from six strains of the highly monomorphic pathogen Salmonella Paratyphi A, sequenced individually and in a pool. A variety of read mapping and quality-weighting procedures were tested to determine the optimal parameters, which afforded > or =80% sensitivity of SNP detection and strong correlation with true SNP frequency at poolwide read depth of 40x, declining only slightly at read depths 20-40x. The method was implemented in Perl and relies on the opensource software Maq for read mapping and SNP calling. The Perl script is freely available from ftp://ftp.sanger.ac.uk/pub/pathogens/pools/.

World wide web implementation of the Langley technical report server

NASA Technical Reports Server (NTRS)

Nelson, Michael L.; Gottlich, Gretchen L.; Bianco, David J.

1994-01-01

On January 14, 1993, NASA Langley Research Center (LaRC) made approximately 130 formal, 'unclassified, unlimited' technical reports available via the anonymous FTP Langley Technical Report Server (LTRS). LaRC was the first organization to provide a significant number of aerospace technical reports for open electronic dissemination. LTRS has been successful in its first 18 months of operation, with over 11,000 reports distributed and has helped lay the foundation for electronic document distribution for NASA. The availability of World Wide Web (WWW) technology has revolutionized the Internet-based information community. This paper describes the transition of LTRS from a centralized FTP site to a distributed data model using the WWW, and suggests how the general model for LTRS can be applied to other similar systems.

Maximizing the biological effect of proton dose delivered with scanned beams via inhomogeneous daily dose distributions

PubMed Central

Zeng, Chuan; Giantsoudi, Drosoula; Grassberger, Clemens; Goldberg, Saveli; Niemierko, Andrzej; Paganetti, Harald; Efstathiou, Jason A.; Trofimov, Alexei

2013-01-01

Purpose: Biological effect of radiation can be enhanced with hypofractionation, localized dose escalation, and, in particle therapy, with optimized distribution of linear energy transfer (LET). The authors describe a method to construct inhomogeneous fractional dose (IFD) distributions, and evaluate the potential gain in the therapeutic effect from their delivery in proton therapy delivered by pencil beam scanning. Methods: For 13 cases of prostate cancer, the authors considered hypofractionated courses of 60 Gy delivered in 20 fractions. (All doses denoted in Gy include the proton's mean relative biological effectiveness (RBE) of 1.1.) Two types of plans were optimized using two opposed lateral beams to deliver a uniform dose of 3 Gy per fraction to the target by scanning: (1) in conventional full-target plans (FTP), each beam irradiated the entire gland, (2) in split-target plans (STP), beams irradiated only the respective proximal hemispheres (prostate split sagittally). Inverse planning yielded intensity maps, in which discrete position control points of the scanned beam (spots) were assigned optimized intensity values. FTP plans preferentially required a higher intensity of spots in the distal part of the target, while STP, by design, employed proximal spots. To evaluate the utility of IFD delivery, IFD plans were generated by rearranging the spot intensities from FTP or STP intensity maps, separately as well as combined using a variety of mixing weights. IFD courses were designed so that, in alternating fractions, one of the hemispheres of the prostate would receive a dose boost and the other receive a lower dose, while the total physical dose from the IFD course was roughly uniform across the prostate. IFD plans were normalized so that the equivalent uniform dose (EUD) of rectum and bladder did not increase, compared to the baseline FTP plan, which irradiated the prostate uniformly in every fraction. An EUD-based model was then applied to estimate tumor control probability (TCP) and normal tissue complication probability (NTCP). To assess potential local RBE variations, LET distributions were calculated with Monte Carlo, and compared for different plans. The results were assessed in terms of their sensitivity to uncertainties in model parameters and delivery. Results: IFD courses included equal number of fractions boosting either hemisphere, thus, the combined physical dose was close to uniform throughout the prostate. However, for the entire course, the prostate EUD in IFD was higher than in conventional FTP by up to 14%, corresponding to the estimated increase in TCP to 96% from 88%. The extent of gain depended on the mixing factor, i.e., relative weights used to combine FTP and STP spot weights. Increased weighting of STP typically yielded a higher target EUD, but also led to increased sensitivity of dose to variations in the proton's range. Rectal and bladder EUD were same or lower (per normalization), and the NTCP for both remained below 1%. The LET distributions in IFD also depended strongly on the mixing weights: plans using higher weight of STP spots yielded higher LET, indicating a potentially higher local RBE. Conclusions: In proton therapy delivered by pencil beam scanning, improved therapeutic outcome can potentially be expected with delivery of IFD distributions, while administering the prescribed quasi-uniform dose to the target over the entire course. The biological effectiveness of IFD may be further enhanced by optimizing the LET distributions. IFD distributions are characterized by a dose gradient located in proximity of the prostate's midplane, thus, the fidelity of delivery would depend crucially on the precision with which the proton range could be controlled. PMID:23635256

Maximizing the biological effect of proton dose delivered with scanned beams via inhomogeneous daily dose distributions.

PubMed

Zeng, Chuan; Giantsoudi, Drosoula; Grassberger, Clemens; Goldberg, Saveli; Niemierko, Andrzej; Paganetti, Harald; Efstathiou, Jason A; Trofimov, Alexei

2013-05-01

Biological effect of radiation can be enhanced with hypofractionation, localized dose escalation, and, in particle therapy, with optimized distribution of linear energy transfer (LET). The authors describe a method to construct inhomogeneous fractional dose (IFD) distributions, and evaluate the potential gain in the therapeutic effect from their delivery in proton therapy delivered by pencil beam scanning. For 13 cases of prostate cancer, the authors considered hypofractionated courses of 60 Gy delivered in 20 fractions. (All doses denoted in Gy include the proton's mean relative biological effectiveness (RBE) of 1.1.) Two types of plans were optimized using two opposed lateral beams to deliver a uniform dose of 3 Gy per fraction to the target by scanning: (1) in conventional full-target plans (FTP), each beam irradiated the entire gland, (2) in split-target plans (STP), beams irradiated only the respective proximal hemispheres (prostate split sagittally). Inverse planning yielded intensity maps, in which discrete position control points of the scanned beam (spots) were assigned optimized intensity values. FTP plans preferentially required a higher intensity of spots in the distal part of the target, while STP, by design, employed proximal spots. To evaluate the utility of IFD delivery, IFD plans were generated by rearranging the spot intensities from FTP or STP intensity maps, separately as well as combined using a variety of mixing weights. IFD courses were designed so that, in alternating fractions, one of the hemispheres of the prostate would receive a dose boost and the other receive a lower dose, while the total physical dose from the IFD course was roughly uniform across the prostate. IFD plans were normalized so that the equivalent uniform dose (EUD) of rectum and bladder did not increase, compared to the baseline FTP plan, which irradiated the prostate uniformly in every fraction. An EUD-based model was then applied to estimate tumor control probability (TCP) and normal tissue complication probability (NTCP). To assess potential local RBE variations, LET distributions were calculated with Monte Carlo, and compared for different plans. The results were assessed in terms of their sensitivity to uncertainties in model parameters and delivery. IFD courses included equal number of fractions boosting either hemisphere, thus, the combined physical dose was close to uniform throughout the prostate. However, for the entire course, the prostate EUD in IFD was higher than in conventional FTP by up to 14%, corresponding to the estimated increase in TCP to 96% from 88%. The extent of gain depended on the mixing factor, i.e., relative weights used to combine FTP and STP spot weights. Increased weighting of STP typically yielded a higher target EUD, but also led to increased sensitivity of dose to variations in the proton's range. Rectal and bladder EUD were same or lower (per normalization), and the NTCP for both remained below 1%. The LET distributions in IFD also depended strongly on the mixing weights: plans using higher weight of STP spots yielded higher LET, indicating a potentially higher local RBE. In proton therapy delivered by pencil beam scanning, improved therapeutic outcome can potentially be expected with delivery of IFD distributions, while administering the prescribed quasi-uniform dose to the target over the entire course. The biological effectiveness of IFD may be further enhanced by optimizing the LET distributions. IFD distributions are characterized by a dose gradient located in proximity of the prostate's midplane, thus, the fidelity of delivery would depend crucially on the precision with which the proton range could be controlled.

National Centers for Environmental Prediction

Science.gov Websites

/NDAS Output Fields (contents, format, grid specs, output frequency, archive): The NWP model The horizontal output grid The vertical grid Access to fields Anonymous FTP Access Permanent Tape Archive

Erosion-protecting effect of oral-care products available on the Swiss market. A pilot study

PubMed

Wasser, Gregor; João-Souza, Samira H; Lussi, Adrian; Carvalho, Thiago S

2018-03-28

The present study sought to test oral-care products available on the Swiss market, such as toothpastes and gels, with respect to the protection of enamel against erosive tooth wear. A total of 56 enamel specimens were divided into 7 groups (n = 8): F-TP = Migros Budget Anti-Caries Toothpaste (Negative Control); F+Sn3500-TP = Elmex Erosion Protection Toothpaste (Positive Control); F-TP + F+Oligopep-Gel = Migros Budget Anti-Caries Toothpaste + Emofluor Protect Gel Professional; F+Sn3120-Gel = Emofluor Gel Intensive Care; F+Oligopep-TP = Candida Protect Professional Toothpaste; F+Sn1260-TP = Emoform-F Protect Toothpaste; and F+Sn3440-TP = Sensodyne Repair & Protect Toothpaste. The specimens were incubated in artificial saliva for 30 min and then brushed in a toothbrushing machine (10 s brushing; total 2 min exposure to the product). After the toothbrush abrasion, the specimens were rinsed, dried and submitted to an erosive challenge (2 min; 1% citric acid; pH 3.6). This sequence was repeated 4 times, and the total enamel surface loss was calculated using indentation measurements before and after the brushing period. All groups presented progressive surface loss throughout the experiment; after 4 cycles, total surface loss values ranged from 0.11 µm (F+Sn3120-Gel) to 0.89 µm (F+Sn1260-TP). Regarding the total surface loss values (median; interquartile range), F-TP (0.54; 0.42–0.59) presented no significant differences compared to any of the other groups. F+Sn3500-TP (0.33; 0.30–0.40), F-TP + F+Oligopep-Gel (0.34; 0.29–0.42) and F+Sn3120-Gel (0.11; 0.09–0.15) presented lower surface loss than F+Oligopep-TP (0.75; 0.59–0.98), F+Sn1260-TP (0.89; 0.68–1.13) and F+Sn3440-TP (0.69; 0.66–0.78). Conclusion: Although some of the oral-care products containing stannous ions or oligopeptide-104 presented numerically lower SL values, they did not present significantly better protection than a regular fluoride toothpaste. The gels showed a general trend of better enamel protection against ETW.

Characterization and in vitro evaluation of electrospun chitosan/polycaprolactone blend fibrous mat for skin tissue engineering.

PubMed

Prasad, Tilak; Shabeena, E A; Vinod, D; Kumary, T V; Anil Kumar, P R

2015-01-01

The electrospinning technique allows engineering biomimetic scaffolds within micro to nanoscale range mimicking natural extracellular matrix (ECM). Chitosan (CS) and polycaprolactone (PCL) were dissolved in a modified solvent mixture consisting of formic acid and acetone (3:7) and mixed in different weight ratios to get chitosan-polycaprolactone [CS-PCL] blend solutions. The CS-PCL blend polymer was electrospun in the same solvent system and compared with PCL. The physicochemical characterization of the electrospun fibrous mats was done using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), tensile test, swelling properties, water contact angle (WCA) analysis, surface profilometry and thermo gravimetric analysis (TGA). The CS-PCL fibrous mat showed decreased hydrophobicity. The CS-PCL mats also showed improved swelling property, tensile strength, thermal stability and surface roughness. The cytocompatibility of the CS-PCL and PCL fibrous mats were examined using mouse fibroblast (L-929) cell line by direct contact and cellular activity with extract of materials confirmed non-cytotoxic nature. The potential of CS-PCL and PCL fibrous mats as skin tissue engineering scaffolds were assessed by cell adhesion, viability, proliferation and actin distribution using human keratinocytes (HaCaT) and L-929 cell lines. Results indicate that CS-PCL is a better scaffold for attachment and proliferation of keratinocytes and is a potential material for skin tissue engineering.

Control of surface topography in biomimetic calcium phosphate coatings.

PubMed

Costa, Daniel O; Allo, Bedilu A; Klassen, Robert; Hutter, Jeffrey L; Dixon, S Jeffrey; Rizkalla, Amin S

2012-02-28

The behavior of cells responsible for bone formation, osseointegration, and bone bonding in vivo are governed by both the surface chemistry and topography of scaffold matrices. Bone-like apatite coatings represent a promising method to improve the osteoconductivity and bonding of synthetic scaffold materials to mineralized tissues for regenerative procedures in orthopedics and dentistry. Polycaprolactone (PCL) films were coated with calcium phosphates (CaP) by incubation in simulated body fluid (SBF). We investigated the effect of SBF ion concentration and soaking time on the surface properties of the resulting apatite coatings. CaP coatings were examined by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectrometry (FTIR), and energy dispersive X-ray spectrometry (EDX). Young's modulus (E(s)) was determined by nanoindentation, and surface roughness was assessed by atomic force microscopy (AFM) and mechanical stylus profilometry. CaP such as carbonate-substituted apatite were deposited onto PCL films. SEM and AFM images of the apatite coatings revealed an increase in topographical complexity and surface roughness with increasing ion concentration of SBF solutions. Young's moduli (E(s)) of various CaP coatings were not significantly different, regardless of the CaP phase or surface roughness. Thus, SBF with high ion concentrations may be used to coat synthetic polymers with CaP layers of different surface topography and roughness to improve the osteoconductivity and bone-bonding ability of the scaffold. © 2012 American Chemical Society

Three-dimensional morphology of the palate in subjects with isolated cleft palate at the stage of permanent dentition.

PubMed

Smahel, Zbynek; Trefný, Pavel; Formánek, Pavel; Müllerová, Ziva; Peterka, Miroslav

2003-11-01

Three-dimensional analysis of palate size and shape in patients with isolated cleft palate at the stage of permanent dentition. Cross-sectional study using Fourier transform profilometry. Twenty-nine randomly selected dental casts of approximately 15-year-old boys with isolated cleft palate and 28 dental casts of normal boys of the same age. All patients were operated on by the same method (pushback and pharyngeal flap surgery) at a mean age of 4.5 years. Data on the palate height in 210 defined locations (pixels). The palate in isolated clefts is narrower throughout its whole extent and lower from the level of the first premolars. The difference, as compared with controls, increases in a posterior direction. At the level of the first molars, palatal height is reduced by one-quarter, the area of the transversal section by more than one-third. The shaping of the palate vault is, on average, symmetrical with a marked interindividual variability. Palatal height does not depend on the width of the dentoalveolar arch, and the height of the primary palate is not reduced. The smaller width and reduced height from the level of the first premolars posteriorly confirm the substantially reduced space available for the tongue in patients with isolated cleft palate. Deviations are on the average symmetrical, and the anterior part of the palate is not shallower.

40 CFR 79.50 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... mixture resulting when a fuel additive is added in specified proportion to the base fuel of the fuel... Procedure (FTP) means the body of exhaust and evaporative emissions test procedures described in 40 CFR 86...

40 CFR 79.50 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... mixture resulting when a fuel additive is added in specified proportion to the base fuel of the fuel... Procedure (FTP) means the body of exhaust and evaporative emissions test procedures described in 40 CFR 86...

40 CFR 79.50 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... mixture resulting when a fuel additive is added in specified proportion to the base fuel of the fuel... Procedure (FTP) means the body of exhaust and evaporative emissions test procedures described in 40 CFR 86...

A catalog of rotational and radial velocities for evolved stars. V. Southern stars

NASA Astrophysics Data System (ADS)

De Medeiros, J. R.; Alves, S.; Udry, S.; Andersen, J.; Nordström, B.; Mayor, M.

2014-01-01

Rotational and radial velocities have been measured for 1589 evolved stars of spectral types F, G, and K and luminosity classes IV, III, II, and Ib, based on observations carried out with the CORAVEL spectrometers. The precision in radial velocity is better than 0.30 km s-1 per observation, whereas rotational velocity uncertainties are typically 1.0 km s-1 for subgiants and giants and 2.0 km s-1 for class II giants and Ib supergiants. Based on observations collected at the Haute-Provence Observatory, Saint-Michel, France, and at the European Southern Observatory, La Silla, Chile.Table 1 is only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (ftp://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/561/A126

The J-2X Fuel Turbopump - Design, Development, and Test

NASA Technical Reports Server (NTRS)

Tellier, James G.; Hawkins, Lakiesha V.; Shinguchi, Brian H.; Marsh, Matthew W.

2011-01-01

Pratt and Whitney Rocketdyne (PWR), a NASA subcontractor, is executing the design, development, test, and evaluation (DDT&E) of a liquid oxygen, liquid hydrogen two hundred ninety four thousand pound thrust rocket engine initially intended for the Upper Stage (US) and Earth Departure Stage (EDS) of the Constellation Program Ares-I Crew Launch Vehicle (CLV). A key element of the design approach was to base the new J-2X engine on the heritage J-2S engine with the intent of uprating the engine and incorporating SSME and RS-68 lessons learned. The J-2S engine was a design upgrade of the flight proven J-2 configuration used to put American astronauts on the moon. The J-2S Fuel Turbopump (FTP) was the first Rocketdyne-designed liquid hydrogen centrifugal pump and provided many of the early lessons learned for the Space Shuttle Main Engine High Pressure Fuel Turbopumps. This paper will discuss the design trades and analyses performed for the current J-2X FTP to increase turbine life; increase structural margins, facilitate component fabrication; expedite turbopump assembly; and increase rotordynamic stability margins. Risk mitigation tests including inducer water tests, whirligig turbine blade tests, turbine air rig tests, and workhorse gas generator tests characterized operating environments, drove design modifications, or identified performance impact. Engineering design, fabrication, analysis, and assembly activities support FTP readiness for the first J-2X engine test scheduled for July 2011.

Linear Energy Transfer Painting With Proton Therapy: A Means of Reducing Radiation Doses With Equivalent Clinical Effectiveness

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fager, Marcus, E-mail: Marcus.Fager@UPHS.UPenn.edu; Medical Radiation Physics, Stockholm University, Stockholm; Toma-Dasu, Iuliana

Purpose: The purpose of this study was to propose a proton treatment planning method that trades physical dose (D) for dose-averaged linear energy transfer (LET{sub d}) while keeping the radiobiologically weighted dose (D{sub RBE}) to the target the same. Methods and Materials: The target is painted with LET{sub d} by using 2, 4, and 7 fields aimed at the proximal segment of the target (split target planning [STP]). As the LET{sub d} within the target increases with increasing number of fields, D decreases to maintain the D{sub RBE} the same as the conventional treatment planning method by using beams treatingmore » the full target (full target planning [FTP]). Results: The LET{sub d} increased 61% for 2-field STP (2STP) compared to FTP, 72% for 4STP, and 82% for 7STP inside the target. This increase in LET{sub d} led to a decrease of D with 5.3 ± 0.6 Gy for 2STP, 4.4 ± 0.7 Gy for 4STP, and 5.3 ± 1.1 Gy for 7STP, keeping the DRBE at 90% of the volume (DRBE, 90) constant to FTP. Conclusions: LET{sub d} painting offers a method to reduce prescribed dose at no cost to the biological effectiveness of the treatment.« less

VizieR Online Data Catalog: Catalogue of Stellar Spectral Classifications (Skiff, 2008)

NASA Astrophysics Data System (ADS)

Skiff, B. A.

2007-01-01

This file contains spectral classifications for stars collected from the literature, serving as a continuation of the compilations produced by the Jascheks, by Kennedy, and by Buscombe. The source of each spectral type is indicated by a standard 19-digit bibcode citation. These papers of course should be cited in publication, not this compilation. The stars are identified either by the name used in each publication or by a valid SIMBAD identifier. Some effort has been made to determine accurate (~1" or better) coordinates for equinox J2000 (and epoch 2000 if possible), and these serve as a secondary identifier. To the extent possible with current astrometric sources, the components of double stars and stars with composite spectra are shown as separate entries. Magnitudes are provided as an indication of brightness, but these data are not necessarily accurate, as they often derive from photographic photometry or rough estimates. The file includes only spectral types determined from spectra (viz. line and band strengths or ratios), omitting those determined from photometry (e.g. DDO, Vilnius) or inferred from broadband colors or spectral energy distributions. The classifications include MK types as well as types not strictly on the MK system (white dwarfs, Wolf-Rayet, etc), and in addition simple HD-style temperature types. Luminosity classes in the early Mount Wilson style (e.g. 'd' for dwarf, 'g' for giant) and other similar schemes have been converted to modern notation. Since a citation is provided for each entry, the source paper should be consulted for details about classification schemes, spectral dispersion, and instrumentation used. System-defining primary MK standard stars are included from the last lists by Morgan and Keenan, and are flagged by a + sign in column 79. The early-type standards comprise the 1973 "dagger standards" (1973ARA&A..11...29M) and stars from the Morgan, Abt, and Tapscott atlas (1978rmsa.book.....M). Standards from Table I of the Morgan & Abt 'MKA' paper (1972AJ.....77...35M) not appearing in the two later lists are added. Keenan made continual adjustments to the standards lists up to the time of his death. Thus the late-type standards comprise those marked as high-weight standards in the 1989 Perkins catalogue (1989ApJS...71..245K = III/150); the revised S-type standards in collaboration with Boeshaar (1980ApJS...43..379K); plus the carbon standards and class IIIb 'clump giants' in collaboration with Barnbaum (1996ApJS..105..419B and 1999ApJ...518..859K). In addition, I have made use of the final types by Keenan up to January 2000 shown at the Ohio State Web site (http://www-astronomy.mps.ohio-state.edu/MKCool), accessed in autumn 2003. Though the present file contains all the stars in these lists, only those marked as standards are flagged as such. Garrison's list of MK 'anchor points' might also be consulted in this regard (1994mpyp.conf....3G, and http://www.astro.utoronto.ca/~garrison/mkstds.html). The catalogue includes for the first time results from many large-scale objective-prism spectral surveys done at Case, Stockholm, Crimea, Abastumani, and elsewhere. The stars in these surveys were usually identified only on charts or by other indirect means, and have been overlooked heretofore because of the difficulty in recovering the stars. More complete results from these separate publications, including notes and identifications, have been made available to the CDS, and are kept at the Lowell Observatory ftp area (ftp://ftp.lowell.edu/pub/bas/starcats). Not all of these stars are present in SIMBAD. As a 'living catalogue', an attempt will be made to keep up with current literature, and to extend the indexing of citations back in time. The sky coverage of the catalogue as of 2008 Aug 8 is shown in equatorial and galactic coordinates on these figures prepared by Chris Watson (AAVSO): ftp://ftp.lowell.edu/pub/bas/starcats/mktypes_equ.gif (113Kb) ftp://ftp.lowell.edu/pub/bas/starcats/mktypes_gal.gif (107Kb) (2 data files).

Cold spray NDE for porosity and other process anomalies

NASA Astrophysics Data System (ADS)

Glass, S. W.; Larche, M. R.; Prowant, M. S.; Suter, J. D.; Lareau, J. P.; Jiang, X.; Ross, K. A.

2018-04-01

This paper describes a technology review of nondestructive evaluation (NDE) methods that can be applied to cold spray coatings. Cold spray is a process for depositing metal powder at high velocity so that it bonds to the substrate metal without significant heating that would be likely to cause additional residual tensile stresses. Coatings in the range from millimeters to centimeters are possible at relatively high deposition rates. Cold spray coatings that may be used for hydroelectric components that are subject to erosion, corrosion, wear, and cavitation damage are of interest. The topic of cold spray NDE is treated generally, however, but may be considered applicable to virtually any cold spray application except where there are constraints of the hydroelectric component application that bear special consideration. Optical profilometry, eddy current, ultrasound, and hardness tests are shown for one set of good, fair, and poor nickel-chrome (NiCr) on 304 stainless steel (304SS) cold spray samples to demonstrate inspection possibilities. The primary indicator of cold spray quality is the cold spray porosity that is most directly measured with witness-sample destructive examinations (DE)—mostly photo-micrographs. These DE-generated porosity values are correlated with optical profilometry, eddy current, ultrasound, and hardness test NDE methods to infer the porosity and other information of interest. These parameters of interest primarily include: • Porosity primarily caused by improper process conditions (temperature, gas velocity, spray standoff, spray angle, powder size, condition, surface cleanliness, surface oxide, etc.) • Presence/absence of the cold spray coating including possible over-sprayed voids • Coating thicknessOptical profilometry measurements of surface roughness trended with porosity plus, if compared with a reference measurement or reference drawing, would provide information on the coating thickness. Ultrasound could provide similar surface profile information plus attenuation measurements trended with porosity. The ultrasound measurements, however, may be limited to geometries where the substrate back-wall is normal to the cold spray surface and not too thick. Eddy current showed a strong correlation with porosity. Eddy currents can also be sensitive to cracks and do not need fluid coupling to make measurements, but are not sensitive to coating thicknesses in most cases. Vickers hardness measurements also tracked well with porosity; however, these types of hardness measurements are also not sensitive to coating thickness. An NDE program may include multiple measurements.

Comparing Commercial WWW Browsers.

ERIC Educational Resources Information Center

Notess, Greg R.

1995-01-01

Four commercial World Wide Web browsers are evaluated for features such as handling of WWW protocols and different URLs: FTP, Telnet, Gopher and WAIS, and e-mail and news; bookmark capabilities; navigation features; file management; and security support. (JKP)

Report on neglect sparks FtP hearings.

PubMed

2015-07-22

A major review of neglect of older people has led to three nurses being removed from the register and a further six being involved in fitness to practise hearings, the Nursing and Midwifery Council said.

Damage evaluation of proton irradiated titanium deuteride thin films to be used as neutron production targets

NASA Astrophysics Data System (ADS)

Suarez Anzorena, Manuel; Bertolo, Alma A.; Gagetti, Leonardo; Gaviola, Pedro A.; del Grosso, Mariela F.; Kreiner, Andrés J.

2018-06-01

Titanium deuteride thin films have been manufactured under different conditions specified by deuterium gas pressure, substrate temperature and time. The films were characterized by different techniques to evaluate the deuterium content and the homogeneity of such films. Samples with different concentrations of deuterium, including non deuterated samples, were irradiated with a 150 keV proton beam. Both deposits, pristine and irradiated, were characterized by optical profilometry and scanning electron microscopy.

Nano-Se: Cheap and easy-to-obtain novel material for all-dielectric nano-photonics

NASA Astrophysics Data System (ADS)

Ivanova, A. K.; Ionin, A. A.; Khmel'nitskii, R. A.; Klevkov, Yu. K.; Kudryashov, S. I.; Levchenko, A. O.; Mel'nik, N. N.; Nastulyavichus, A. A.; Rudenko, A. A.; Saraeva, I. N.; Smirnov, N. A.; Zayarny, D. A.; Gonchukov, S. A.; Tolordava, E. R.; Baranov, A. N.

2017-09-01

Milligram-per-second production of selenium nanoparticles in water sols was realized through few W, kHz-rate nanosecond laser ablation of a solid selenium pellet. High-yield particle formation mechanism and ultimate mass-removal yield were elucidated by optical profilometry and scanning electron microscopy characterization of crater depths and topographies. Deposited particles were inspected by scanning electron microscopy, while optical transmission Raman and dynamic light scattering spectroscopy characterized their hydrosols.

A new method for the assessment of the surface topography of NiTi rotary instruments.

PubMed

Ferreira, F; Barbosa, I; Scelza, P; Russano, D; Neff, J; Montagnana, M; Zaccaro Scelza, M

2017-09-01

To describe a new method for the assessment of nanoscale alterations in the surface topography of nickel-titanium endodontic instruments using a high-resolution optical method and to verify the accuracy of the technique. Noncontact three-dimensional optical profilometry was used to evaluate defects on a size 25, .08 taper reciprocating instrument (WaveOne ® ), which was subjected to a cyclic fatigue test in a simulated root canal in a clear resin block. For the investigation, an original procedure was established for the analysis of similar areas located 3 mm from the tip of the instrument before and after canal preparation to enable the repeatability and reproducibility of the measurements with precision. All observations and analysis were taken in areas measuring 210 × 210 μm provided by the software of the equipment. The three-dimensional high-resolution image analysis showed clear alterations in the surface topography of the examined cutting blade and flute of the instrument, before and after use, with the presence of surface irregularities such as deformations, debris, grooves, cracks, steps and microcavities. Optical profilometry provided accurate qualitative nanoscale evaluation of similar surfaces before and after the fatigue test. The stability and repeatability of the technique enables a more comprehensive understanding of the effects of wear on the surface of endodontic instruments. © 2016 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Simultaneous multiple view high resolution surface geometry acquisition using structured light and mirrors.

PubMed

Basevi, Hector R A; Guggenheim, James A; Dehghani, Hamid; Styles, Iain B

2013-03-25

Knowledge of the surface geometry of an imaging subject is important in many applications. This information can be obtained via a number of different techniques, including time of flight imaging, photogrammetry, and fringe projection profilometry. Existing systems may have restrictions on instrument geometry, require expensive optics, or require moving parts in order to image the full surface of the subject. An inexpensive generalised fringe projection profilometry system is proposed that can account for arbitrarily placed components and use mirrors to expand the field of view. It simultaneously acquires multiple views of an imaging subject, producing a cloud of points that lie on its surface, which can then be processed to form a three dimensional model. A prototype of this system was integrated into an existing Diffuse Optical Tomography and Bioluminescence Tomography small animal imaging system and used to image objects including a mouse-shaped plastic phantom, a mouse cadaver, and a coin. A surface mesh generated from surface capture data of the mouse-shaped plastic phantom was compared with ideal surface points provided by the phantom manufacturer, and 50% of points were found to lie within 0.1mm of the surface mesh, 82% of points were found to lie within 0.2mm of the surface mesh, and 96% of points were found to lie within 0.4mm of the surface mesh.

Spectrally resolved chromatic confocal interferometry for one-shot nano-scale surface profilometry with several tens of micrometric depth range

NASA Astrophysics Data System (ADS)

Chen, Liang-Chia; Chen, Yi-Shiuan; Chang, Yi-Wei; Lin, Shyh-Tsong; Yeh, Sheng Lih

2013-01-01

In this research, new nano-scale measurement methodology based on spectrally-resolved chromatic confocal interferometry (SRCCI) was successfully developed by employing integration of chromatic confocal sectioning and spectrally-resolve white light interferometry (SRWLI) for microscopic three dimensional surface profilometry. The proposed chromatic confocal method (CCM) using a broad band while light in combination with a specially designed chromatic dispersion objective is capable of simultaneously acquiring multiple images at a large range of object depths to perform surface 3-D reconstruction by single image shot without vertical scanning and correspondingly achieving a high measurement depth range up to hundreds of micrometers. A Linnik-type interferometric configuration based on spectrally resolved white light interferometry is developed and integrated with the CCM to simultaneously achieve nanoscale axis resolution for the detection point. The white-light interferograms acquired at the exit plane of the spectrometer possess a continuous variation of wavelength along the chromaticity axis, in which the light intensity reaches to its peak when the optical path difference equals to zero between two optical arms. To examine the measurement accuracy of the developed system, a pre-calibrated accurate step height target with a total step height of 10.10 μm was measured. The experimental result shows that the maximum measurement error was verified to be less than 0.3% of the overall measuring height.

Accurate characterisation of hole size and location by projected fringe profilometry

NASA Astrophysics Data System (ADS)

Wu, Yuxiang; Dantanarayana, Harshana G.; Yue, Huimin; Huntley, Jonathan M.

2018-06-01

The ability to accurately estimate the location and geometry of holes is often required in the field of quality control and automated assembly. Projected fringe profilometry is a potentially attractive technique on account of being non-contacting, of lower cost, and orders of magnitude faster than the traditional coordinate measuring machine. However, we demonstrate in this paper that fringe projection is susceptible to significant (hundreds of µm) measurement artefacts in the neighbourhood of hole edges, which give rise to errors of a similar magnitude in the estimated hole geometry. A mechanism for the phenomenon is identified based on the finite size of the imaging system’s point spread function and the resulting bias produced near to sample discontinuities in geometry and reflectivity. A mathematical model is proposed, from which a post-processing compensation algorithm is developed to suppress such errors around the holes. The algorithm includes a robust and accurate sub-pixel edge detection method based on a Fourier descriptor of the hole contour. The proposed algorithm was found to reduce significantly the measurement artefacts near the hole edges. As a result, the errors in estimated hole radius were reduced by up to one order of magnitude, to a few tens of µm for hole radii in the range 2–15 mm, compared to those from the uncompensated measurements.

Plasma Electrolytic Oxidation of Titanium Implant Surfaces: Microgroove-Structures Improve Cellular Adhesion and Viability.

PubMed

Hartjen, Philip; Hoffmann, Alexia; Henningsen, Anders; Barbeck, Mike; Kopp, Alexander; Kluwe, Lan; Precht, Clarissa; Quatela, Olivia; Gaudin, Robert; Heiland, Max; Friedrich, Reinhard E; Knipfer, Christian; Grubeanu, Daniel; Smeets, Ralf; Jung, Ole

2018-01-01

Plasma electrolytic oxidation (PEO) is an established electrochemical treatment technique that can be used for surface modifications of metal implants. In this study we to treated titanium implants with PEO, to examine the resulting microstructure and to characterize adhesion and viability of cells on the treated surfaces. Our aim was to identify an optimal surface-modification for titanium implants in order to improve soft-tissue integration. Three surface-variants were generated on titanium alloy Ti6Al4V by PEO-treatment. The elemental composition and the microstructures of the surfaces were characterized using energy dispersive X-ray spectroscopy, scanning electron microscopy and profilometry. In vitro cytocompatibility of the surfaces was assessed by seeding L929 fibroblasts onto them and measuring the adhesion, viability and cytotoxicity of cells by means of live/dead staining, XTT assay and LDH assay. Electron microscopy and profilometry revealed that the PEO-surface variants differed largely in microstructure/topography, porosity and roughness from the untreated control material as well as from one another. Roughness was generally increased after PEO-treatment. In vitro, PEO-treatment led to improved cellular adhesion and viability of cells accompanied by decreased cytotoxicity. PEO-treatment provides a promising strategy to improve the integration of titanium implants with surrounding tissues. Copyright© 2018, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.

NMC denies prioritising new FtP cases to meet government target.

PubMed

Osborne, Katie

2015-01-27

The Nursing and Midwifery Council's success in reducing the time it takes to handle fitness to practise cases has not been achieved by neglecting older cases, according to its chief executive Jackie Smith.

Using ERA-Interim reanalysis for creating datasets of energy-relevant climate variables

NASA Astrophysics Data System (ADS)

Jones, Philip D.; Harpham, Colin; Troccoli, Alberto; Gschwind, Benoit; Ranchin, Thierry; Wald, Lucien; Goodess, Clare M.; Dorling, Stephen

2017-07-01

The construction of a bias-adjusted dataset of climate variables at the near surface using ERA-Interim reanalysis is presented. A number of different, variable-dependent, bias-adjustment approaches have been proposed. Here we modify the parameters of different distributions (depending on the variable), adjusting ERA-Interim based on gridded station or direct station observations. The variables are air temperature, dewpoint temperature, precipitation (daily only), solar radiation, wind speed, and relative humidity. These are available on either 3 or 6 h timescales over the period 1979-2016. The resulting bias-adjusted dataset is available through the Climate Data Store (CDS) of the Copernicus Climate Change Data Store (C3S) and can be accessed at present from ftp://ecem.climate.copernicus.eu. The benefit of performing bias adjustment is demonstrated by comparing initial and bias-adjusted ERA-Interim data against gridded observational fields.

REBASE--a database for DNA restriction and modification: enzymes, genes and genomes.

PubMed

Roberts, Richard J; Vincze, Tamas; Posfai, Janos; Macelis, Dana

2015-01-01

REBASE is a comprehensive and fully curated database of information about the components of restriction-modification (RM) systems. It contains fully referenced information about recognition and cleavage sites for both restriction enzymes and methyltransferases as well as commercial availability, methylation sensitivity, crystal and sequence data. All genomes that are completely sequenced are analyzed for RM system components, and with the advent of PacBio sequencing, the recognition sequences of DNA methyltransferases (MTases) are appearing rapidly. Thus, Type I and Type III systems can now be characterized in terms of recognition specificity merely by DNA sequencing. The contents of REBASE may be browsed from the web http://rebase.neb.com and selected compilations can be downloaded by FTP (ftp.neb.com). Monthly updates are also available via email. © The Author(s) 2014. Published by Oxford University Press on behalf of Nucleic Acids Research.

Maintaining hope at the 11th hour: authenticity buffers the effect of limited time perspective on hope.

PubMed

Davis, William E; Hicks, Joshua A

2013-12-01

Four studies tested the hypothesis that limited time perceptions are associated with lower levels of hope, and that this effect is buffered by high levels of authenticity. Study 1 (n = 256) utilized a cross-sectional design in which participants completed dispositional measures of time perspective, hope, and authenticity. Three subsequent studies tested our hypothesis experimentally. In a pilot study (n = 124), participants reported their perceived authenticity, future time perspective (FTP) was manipulated (limited vs. open-ended), and state hope was assessed. Study 2 (n = 156) introduced a new manipulation of FTP, and Study 3 (n = 242) replicated Study 2 with the addition of a neutral control condition. Across all studies, individuals who perceived time as limited reported lower levels of hope relative to those who perceived time as open-ended (or those in a neutral control condition), but, importantly, this effect was attenuated for highly authentic individuals.

Crustal thickness inversions from recent Mars Reconnaissance Orbiter gravity solutions

NASA Astrophysics Data System (ADS)

Neumann, Gregory; Zuber, Maria T.; Lemoine, Frank; Neumann, Gregory A.; Smith, David E.

Recent Mars Reconnaissance Orbiter gravity solutions from low-altitude tracking of MRO, together with previous spacecraft, have dramatically improved correlation with MOLA topography at spherical harmonic degrees up to 95. We present several updated models of crustal thickness. These models are calculated to fit the Bouguer potential anomaly following the assumptions in Neumann et al. 2004, with much weaker a priori constraints applied to the topographic corrections and the downward continuation to the martian mantle. These models are available via anonymous ftp to "ftp://lepftp.gsfc.nasa.gov/pub/exports/tharsis/marscrust3". The higher-resolution models improve on those we produced in 2004-2005. They are appropriate for modeling impacts as small as 300 km diameter, and for processes related to the hemispheric dichotomy boundary. We discuss in particular the assumption of quasi-uniform crustal density and its likely failure in volcanic regions.

VizieR Online Data Catalog: DIA OGLE2 candidate variable stars catalog (Wozniak+, 2002)

NASA Astrophysics Data System (ADS)

Wozniak, P. R.; Udalski, A.; Szymanski, M.; Kubiak, M.; Pietrzynski, G.; Soszinski, I.; Zebrun, K.

2005-07-01

We present the first edition of a catalog of variable stars from OGLE-II Galactic bulge data covering 3 years: 1997-1999. Typically 200-300 I band data points are available in 49 fields between -11 and +11 degrees in galactic longitude, totaling roughly 11 square degrees in sky coverage. Photometry was obtained using the Difference Image Analysis (DIA) software and tied to the OGLE data base with the DoPhot package. The present version of the catalog comprises 221801 light curves. In this preliminary work the level of contamination by spurious detections is still about 10%. Parts of the catalog have only crude calibration, insufficient for distance determinations. The next, fully calibrated, edition will include the data collected in year 2000. The data is accessible via ftp, at ftp://bulge.princeton.edu/ogle/ogle2/bulgediavariables (1 data file).

Network Configuration Analysis for Formation Flying Satellites

NASA Technical Reports Server (NTRS)

Knoblock, Eric J.; Wallett, Thomas M.; Konangi, Vijay K.; Bhasin, Kul B.

2001-01-01

The performance of two networks to support autonomous multi-spacecraft formation flying systems is presented. Both systems are comprised of a ten-satellite formation, with one of the satellites designated as the central or 'mother ship.' All data is routed through the mother ship to the terrestrial network. The first system uses a TCP/EP over ATM protocol architecture within the formation, and the second system uses the IEEE 802.11 protocol architecture within the formation. The simulations consist of file transfers using either the File Transfer Protocol (FTP) or the Simple Automatic File Exchange (SAFE) Protocol. The results compare the IP queuing delay, IP queue size and IP processing delay at the mother ship as well as end-to-end delay for both systems. In all cases, using IEEE 802.11 within the formation yields less delay. Also, the throughput exhibited by SAFE is better than FTP.

Effect of using a Planecta™ port with a three-way stopcock on the natural frequency of blood pressure transducer kits.

PubMed

Fujiwara, Shigeki; Tachihara, Keiichi; Mori, Satoshi; Ouchi, Kentaro; Yokoe, Chizuko; Imaizumi, Uno; Morimoto, Yoshinari; Miki, Yoichiro; Toyoguchi, Izumi; Yoshida, Kazu-Ichi; Yokoyama, Takeshi

2016-12-01

Blood pressure transducer kits are equipped with two types of Planecta™ ports-the flat-type Planecta™ port (FTP) and the Planecta™ port with a three-way stopcock (PTS). We reported that FTP application decreased the natural frequency of the kits. However, Planecta™ is an invaluable tool as it prevents infection, ensures technical simplicity, and excludes air. Hence, an ideal Planecta™ port that does not decrease the frequency characteristics is required. As a first step in this direction, we aimed to assess the influence of PTSs on the natural frequency of blood transducer kits. A DTXplus transducer kit (DT4812J; Argon Medical Devices, TX, USA) was used along with ≥1 PTSs (JMS, Hiroshima, Japan), and the frequency characteristics were assessed. The natural frequency and damping coefficient of each kit were obtained by using frequency characteristics analysis software, and these parameters were evaluated by plotting them on Gardner's chart. Regardless of whether one or two PTSs were inserted, the natural frequency of the kits only slightly decreased (from 42.5 to 41.1 Hz, when 2 PTSs were used). Thus, the frequency characteristics of the kits with PTSs were adequate for pressure monitoring. The insertion of ≥2 FTPs in pressure transducer kits should be avoided, as they markedly decrease the natural frequency and lead to underdamping. However, the effect of PTS insertion in pressure transducer kits on the frequency characteristics is minimal. Thus, we found that the use of PTS markedly improved the frequency characteristics as compared to the use of FTP.

Automatic detection of bone fragments in poultry using multi-energy x-rays

DOEpatents

Gleason, Shaun S [Knoxville, TN; Paulus, Michael J [Knoxville, TN; Mullens, James A [Knoxville, TN

2002-04-09

At least two linear arrays of x-ray detectors are placed below a conveyor belt in a poultry processing plant. Multiple-energy x-ray sources illuminate the poultry and are detected by the detectors. Laser profilometry is used to measure the poultry thickness as the x-ray data is acquired. The detector readout is processed in real time to detect the presence of small highly attenuating fragments in the poultry, i.e., bone, metal, and cartilage.

DOE Office of Scientific and Technical Information (OSTI.GOV)

B. R. Marshall

Spectral reflectance was used to determine the thickness of thin glue layers in a study of the effect of the glue on radiance and reflectance measurements of shocked-tin substrates attached to lithium fluoride windows. Measurements based on profilometry of the components were found to be inaccurate due to flatness variations and deformation of the tin substrate under pressure during the gluing process. The accuracy of the spectral reflectance measurements were estimated to be ±0.5 μm, which was sufficient to demonstrate a convincing correlation between glue thickness and shock-generated light.

Application of modern surface analytical tools in the investigation of surface deterioration processes

NASA Technical Reports Server (NTRS)

Buckley, D. H.

1983-01-01

Surface profilometry and scanning electron microscopy were utilized to study changes in the surface of polymers when eroded. The X-ray photoelectron spectroscopy (XPS) and depth profile analysis indicate the corrosion of metal and ceramic surfaces and reveal the diffusion of certain species into the surface to produce a change in mechanical properties. Ion implantation, nitriding and plating and their effects on the surface are characterized. Auger spectroscopy analysis identified morphological properties of coatings applied to surfaces by sputter deposition.

Precision Thickness Variation Mapping Via One-Transducer Ultrasonic High Resolution Profilometry for Sample With Irregular or Rough Surface

NASA Technical Reports Server (NTRS)

Roth, Don J. (Inventor)

1996-01-01

An apparatus and method for determination of sample thickness and surface depression utilizing ultrasonic pulses is discussed. The sample is held in a predetermined position by a support member having a reference surface. Ultrasonic pulses travel through a medium of known velocity propagation and reflect off the reference surface and a sample surface. Time of flight data of surface echoes are converted to distances between sample surfaces to obtain computer-generated thickness profiles and surface mappings.

Internet Cruising with the Internet Hunt.

ERIC Educational Resources Information Center

Gates, Rick

1993-01-01

Describes the Internet Hunt, a game designed to challenge and inform librarians about information sources available on the Internet. The use of telnet, and FTP (File Transfer Protocol) are described, and the results of the first Internet Hunt are provided. (EA)

FTP Services to be Discontinued at the ASDC

Atmospheric Science Data Center

2018-05-04

... it with other file transport mechanisms ( e.g., SFTP, https).  The timeframe for migrations varies per service.  In most cases, ... register for an Earthdata Login account are available at https://urs.earthdata.nasa.gov/users/new   ...

SAGE III L2 Lunar Event Species Profiles (Binary)

Atmospheric Science Data Center

2017-10-27

... Search and Order:  Earthdata Search   FTP Access:  Data Pool Parameters:  Chlorine Dioxide Nitrogen Dioxide ... Data Additional Info:  Data Format: Big Endian/IEEE Binary; Avg Size in MB: 0.017 SCAR-B Block:  ...

Preliminary AirMSPI Datasets

Atmospheric Science Data Center

2018-02-26

... Datasets   The data files available through this web page and ftp links are preliminary AIrMSPI datasets from recent campaigns. ... and geometric corrections. Caution should be used for science analysis. At a later date, more qualified versions will be made public. ...

The Caviar software package for the astrometric reduction of Cassini ISS images: description and examples

NASA Astrophysics Data System (ADS)

Cooper, N. J.; Lainey, V.; Meunier, L.-E.; Murray, C. D.; Zhang, Q.-F.; Baillie, K.; Evans, M. W.; Thuillot, W.; Vienne, A.

2018-02-01

Aims: Caviar is a software package designed for the astrometric measurement of natural satellite positions in images taken using the Imaging Science Subsystem (ISS) of the Cassini spacecraft. Aspects of the structure, functionality, and use of the software are described, and examples are provided. The integrity of the software is demonstrated by generating new measurements of the positions of selected major satellites of Saturn, 2013-2016, along with their observed minus computed (O-C) residuals relative to published ephemerides. Methods: Satellite positions were estimated by fitting a model to the imaged limbs of the target satellites. Corrections to the nominal spacecraft pointing were computed using background star positions based on the UCAC5 and Tycho2 star catalogues. UCAC5 is currently used in preference to Gaia-DR1 because of the availability of proper motion information in UCAC5. Results: The Caviar package is available for free download. A total of 256 new astrometric observations of the Saturnian moons Mimas (44), Tethys (58), Dione (55), Rhea (33), Iapetus (63), and Hyperion (3) have been made, in addition to opportunistic detections of Pandora (20), Enceladus (4), Janus (2), and Helene (5), giving an overall total of 287 new detections. Mean observed-minus-computed residuals for the main moons relative to the JPL SAT375 ephemeris were - 0.66 ± 1.30 pixels in the line direction and 0.05 ± 1.47 pixels in the sample direction. Mean residuals relative to the IMCCE NOE-6-2015-MAIN-coorb2 ephemeris were -0.34 ± 0.91 pixels in the line direction and 0.15 ± 1.65 pixels in the sample direction. The reduced astrometric data are provided in the form of satellite positions for each image. The reference star positions are included in order to allow reprocessing at some later date using improved star catalogues, such as later releases of Gaia, without the need to re-estimate the imaged star positions. The Caviar software is available for free download from: ftp://ftp://ftp.imcce.fr/pub/softwares/caviar.Full Tables 1 and 5 are only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (http://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/610/A2

Risk indicators for referral during labor from community midwife to gynecologist: a prospective cohort study.

PubMed

Schuit, Ewoud; Hukkelhoven, Chantal W P M; van der Goes, Birgit Y; Overbeeke, Ilanit; Moons, Karel G M; Mol, Ben W J; Groenwold, Rolf H H; Kwee, Anneke

2016-10-01

To identify risk indicators for referral during labor from community midwife to a gynecologist in a prospective cohort of women with a singleton term pregnancy, starting labor with a community midwife between 2000 and 2007, registered in the Dutch national perinatal registry. Referral from community midwife to a gynecologist during labor, because of fetal distress, failure to progress in second stage of labor, meconium stained amniotic fluid, failure to progress in first stage of labor, wish for pain relief, a combination of other less urgent reasons or no referral (reference). A total of 241 595 (32%) were referred from community midwife to a gynecologist during labor, because of fetal distress (FD;5%), failure to progress in second stage of labor (FTP2;14%), meconium stained amniotic fluid (MSAF;24%), failure to progress in first stage of labor (FTP1;17%), wish for pain relief (WFPR;7%) or a combination of other less urgent reasons, for example, malpresentation (e.g. breech) or other nonspecified problems (OTHER;33%). The strongest overall risk indicators were gestational age (lower risk of referral because of FD, FTP2, MSAF, FTP1 and WFPR and a higher risk of referral because of OTHER at a gestational age between 37(+0) and 37(+)(6) weeks, and higher risks of referral for all reasons at a gestational age ≥41(+)(0) when compared to a gestational age between 38 (+)(0) and 40 (+)(6) weeks and no referral), the intended place of delivery (higher risk of all types of referral compared to no referral when the intended place of delivery was either at a midwife-led birth center or a hospital instead of at home) and birth history (higher risk of all types of referral compared to no referral when women had a history of instrumental vaginal delivery or when they were nulliparous instead of being multiparous without a history of an instrument vaginal delivery). Risk indicators associated with specific reasons of referral were maternal age, ethnicity, degree of urbanization, social economic status, neonatal gender and birth weight. Among low-risk pregnant women, a referral during labor is associated with readily available risk indicators. These risk indicators may be used to increase referral risk awareness and to counsel women for the intended place to start labor.

Maximizing the biological effect of proton dose delivered with scanned beams via inhomogeneous daily dose distributions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zeng Chuan; Giantsoudi, Drosoula; Grassberger, Clemens

2013-05-15

Purpose: Biological effect of radiation can be enhanced with hypofractionation, localized dose escalation, and, in particle therapy, with optimized distribution of linear energy transfer (LET). The authors describe a method to construct inhomogeneous fractional dose (IFD) distributions, and evaluate the potential gain in the therapeutic effect from their delivery in proton therapy delivered by pencil beam scanning. Methods: For 13 cases of prostate cancer, the authors considered hypofractionated courses of 60 Gy delivered in 20 fractions. (All doses denoted in Gy include the proton's mean relative biological effectiveness (RBE) of 1.1.) Two types of plans were optimized using two opposedmore » lateral beams to deliver a uniform dose of 3 Gy per fraction to the target by scanning: (1) in conventional full-target plans (FTP), each beam irradiated the entire gland, (2) in split-target plans (STP), beams irradiated only the respective proximal hemispheres (prostate split sagittally). Inverse planning yielded intensity maps, in which discrete position control points of the scanned beam (spots) were assigned optimized intensity values. FTP plans preferentially required a higher intensity of spots in the distal part of the target, while STP, by design, employed proximal spots. To evaluate the utility of IFD delivery, IFD plans were generated by rearranging the spot intensities from FTP or STP intensity maps, separately as well as combined using a variety of mixing weights. IFD courses were designed so that, in alternating fractions, one of the hemispheres of the prostate would receive a dose boost and the other receive a lower dose, while the total physical dose from the IFD course was roughly uniform across the prostate. IFD plans were normalized so that the equivalent uniform dose (EUD) of rectum and bladder did not increase, compared to the baseline FTP plan, which irradiated the prostate uniformly in every fraction. An EUD-based model was then applied to estimate tumor control probability (TCP) and normal tissue complication probability (NTCP). To assess potential local RBE variations, LET distributions were calculated with Monte Carlo, and compared for different plans. The results were assessed in terms of their sensitivity to uncertainties in model parameters and delivery. Results: IFD courses included equal number of fractions boosting either hemisphere, thus, the combined physical dose was close to uniform throughout the prostate. However, for the entire course, the prostate EUD in IFD was higher than in conventional FTP by up to 14%, corresponding to the estimated increase in TCP to 96% from 88%. The extent of gain depended on the mixing factor, i.e., relative weights used to combine FTP and STP spot weights. Increased weighting of STP typically yielded a higher target EUD, but also led to increased sensitivity of dose to variations in the proton's range. Rectal and bladder EUD were same or lower (per normalization), and the NTCP for both remained below 1%. The LET distributions in IFD also depended strongly on the mixing weights: plans using higher weight of STP spots yielded higher LET, indicating a potentially higher local RBE. Conclusions: In proton therapy delivered by pencil beam scanning, improved therapeutic outcome can potentially be expected with delivery of IFD distributions, while administering the prescribed quasi-uniform dose to the target over the entire course. The biological effectiveness of IFD may be further enhanced by optimizing the LET distributions. IFD distributions are characterized by a dose gradient located in proximity of the prostate's midplane, thus, the fidelity of delivery would depend crucially on the precision with which the proton range could be controlled.« less

39 CFR 20.4 - Amendments to the International Mail Manual.

Code of Federal Regulations, 2010 CFR

2010-07-01

... incorporated by reference into this part and will be available at http://pe.usps.gov. The text of amendments to... Postal Bulletin, copies of which may be accessed at http://www.usps.com/cpim/ftp/bulletin/pb.htm. ...

Computer Networks and Networking: A Primer.

ERIC Educational Resources Information Center

Collins, Mauri P.

1993-01-01

Provides a basic introduction to computer networks and networking terminology. Topics addressed include modems; the Internet; TCP/IP (Transmission Control Protocol/Internet Protocol); transmission lines; Internet Protocol numbers; network traffic; Fidonet; file transfer protocol (FTP); TELNET; electronic mail; discussion groups; LISTSERV; USENET;…

Easy Online Access to Helpful Internet Guides.

ERIC Educational Resources Information Center

Tuss, Joan

1993-01-01

Lists recommended guides to the Internet that are available electronically. Basic commands needed to use anonymous ftp (file transfer protocol) are explained. An annotation and command formats to access, scan, retrieve, and exit each file are included for 11 titles. (EAM)

The Internet for Educators: A User's Guide.

ERIC Educational Resources Information Center

Monahan, Brian D.; Dharm, Matthew

1995-01-01

Presents a practical guide to use of the Internet. Topics discussed include getting connected; the UNIX operating system; electronic mail; FTP (File Transfer Protocol); Finger; Telnet; Archie; Veronica; Gopher; teacher education; the Yanoff List; and expansion of the Internet. (three references) (LRW)

39 CFR 20.4 - Amendments to the International Mail Manual.

Code of Federal Regulations, 2012 CFR

2012-07-01

... incorporated by reference into this part and will be available at http://pe.usps.gov. The text of amendments to... Postal Bulletin, copies of which may be accessed at http://www.usps.com/cpim/ftp/bulletin/pb.htm. ...

39 CFR 20.4 - Amendments to the International Mail Manual.

Code of Federal Regulations, 2011 CFR

2011-07-01

... incorporated by reference into this part and will be available at http://pe.usps.gov. The text of amendments to... Postal Bulletin, copies of which may be accessed at http://www.usps.com/cpim/ftp/bulletin/pb.htm. ...

39 CFR 20.4 - Amendments to the International Mail Manual.

Code of Federal Regulations, 2013 CFR

2013-07-01

... incorporated by reference into this part and will be available at http://pe.usps.gov. The text of amendments to... Postal Bulletin, copies of which may be accessed at http://www.usps.com/cpim/ftp/bulletin/pb.htm. ...

FTP Services to be Discontinued at the ASDC

Atmospheric Science Data Center

2018-05-04

... it with other file transport mechanisms ( e.g., SFTP, https).  The timeframe for migrations varies per service.  In most cases, ... register for an Earthdata Login account are available at https://urs.earthdata.nasa.gov/users/new   Read more ...

39 CFR 20.4 - Amendments to the International Mail Manual.

Code of Federal Regulations, 2014 CFR

2014-07-01

... incorporated by reference into this part and will be available at http://pe.usps.gov. The text of amendments to... Postal Bulletin, copies of which may be accessed at http://www.usps.com/cpim/ftp/bulletin/pb.htm. ...

How do I order MISR data?

Atmospheric Science Data Center

2017-10-12

... and archived at the NASA Langley Research Center Atmospheric Science Data Center (ASDC). A MISR Order and Customization Tool is ... Pool (an on-line, short-term data cache that provides a Web interface and FTP access). Specially subsetted and/or reformatted MISR data ...

Laser Processing of Metals and Polymers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singaravelu, Senthilraja

2012-05-01

A laser offers a unique set of opportunities for precise delivery of high quality coherent energy. This energy can be tailored to alter the properties of material allowing a very flexible adjustment of the interaction that can lead to melting, vaporization, or just surface modification. Nowadays laser systems can be found in nearly all branches of research and industry for numerous applications. Sufficient evidence exists in the literature to suggest that further advancements in the field of laser material processing will rely significantly on the development of new process schemes. As a result they can be applied in various applicationsmore » starting from fundamental research on systems, materials and processes performed on a scientific and technical basis for the industrial needs. The interaction of intense laser radiation with solid surfaces has extensively been studied for many years, in part, for development of possible applications. In this thesis, I present several applications of laser processing of metals and polymers including polishing niobium surface, producing a superconducting phase niobium nitride and depositing thin films of niobium nitride and organic material (cyclic olefin copolymer). The treated materials were examined by scanning electron microscopy (SEM), electron probe microanalysis (EPMA), atomic force microscopy (AFM), high resolution optical microscopy, surface profilometry, Fourier transform infrared spectroscopy (FTIR) and x-ray diffraction (XRD). Power spectral density (PSD) spectra computed from AFM data gives further insight into the effect of laser melting on the topography of the treated niobium.« less

Optimal control of build height utilizing optical profilometry in cold spray deposits

NASA Astrophysics Data System (ADS)

Chakraborty, Abhijit; Shishkin, Sergey; Birnkrant, Michael J.

2017-04-01

Part-to-part variability and poor part quality due to failure to maintain geometric specifications pose a challenge for adopting Additive Manufacturing (AM) as a viable manufacturing process. In recent years, In-process Monitoring and Control (InPMC) has received a lot of attention as an approach to overcome these obstacles. The ability to sense geometry of the deposited layers accurately enables effective process monitoring and control of AM application. This paper demonstrates an application of geometry sensing technique for the coating deposition Cold Spray process, where solid powders are accelerated through a nozzle, collides with the substrate and adheres to it. Often the deposited surface has shape irregularities. This paper proposes an approach to suppress the iregularities by controlling the deposition height. An analytical control-oriented model is developed that expresses the resulting height of deposit as an integral function of nozzle velocity and angle. In order to obtain height information at each layer, a Micro-Epsilon laser line scanner was used for surface profiling after each deposition. This surface profile information, specifically the layer height, was then fed back to an optimal control algorithm which manipulated the nozzle speed to control the layer height to a pre specified height. While the problem is heavily nonlinear, we were able to transform it into equivalent Optimal Control problem linear w.r.t. input. That enabled development of two solution methods: one is fast and approximate, while another is more accurate but still efficient.

Multi-modal diffuse optical techniques for breast cancer neoadjuvant chemotherapy monitoring (Conference Presentation)

NASA Astrophysics Data System (ADS)

Cochran, Jeffrey M.; Busch, David R.; Ban, Han Y.; Kavuri, Venkaiah C.; Schweiger, Martin J.; Arridge, Simon R.; Yodh, Arjun G.

2017-02-01

We present high spatial density, multi-modal, parallel-plate Diffuse Optical Tomography (DOT) imaging systems for the purpose of breast tumor detection. One hybrid instrument provides time domain (TD) and continuous wave (CW) DOT at 64 source fiber positions. The TD diffuse optical spectroscopy with PMT- detection produces low-resolution images of absolute tissue scattering and absorption while the spatially dense array of CCD-coupled detector fibers (108 detectors) provides higher-resolution CW images of relative tissue optical properties. Reconstruction of the tissue optical properties, along with total hemoglobin concentration and tissue oxygen saturation, is performed using the TOAST software suite. Comparison of the spatially-dense DOT images and MR images allows for a robust validation of DOT against an accepted clinical modality. Additionally, the structural information from co-registered MR images is used as a spatial prior to improve the quality of the functional optical images and provide more accurate quantification of the optical and hemodynamic properties of tumors. We also present an optical-only imaging system that provides frequency domain (FD) DOT at 209 source positions with full CCD detection and incorporates optical fringe projection profilometry to determine the breast boundary. This profilometry serves as a spatial constraint, improving the quality of the DOT reconstructions while retaining the benefits of an optical-only device. We present initial images from both human subjects and phantoms to display the utility of high spatial density data and multi-modal information in DOT reconstruction with the two systems.

Fringe projection profilometry with portable consumer devices

NASA Astrophysics Data System (ADS)

Liu, Danji; Pan, Zhipeng; Wu, Yuxiang; Yue, Huimin

2018-01-01

A fringe projection profilometry (FPP) using portable consumer devices is attractive because it can realize optical three dimensional (3D) measurement for ordinary consumers in their daily lives. We demonstrate a FPP using a camera in a smart mobile phone and a digital consumer mini projector. In our experiment of testing the smart phone (iphone7) camera performance, the rare-facing camera in the iphone7 causes the FPP to have a fringe contrast ratio of 0.546, nonlinear carrier phase aberration value of 0.6 rad, and nonlinear phase error of 0.08 rad and RMS random phase error of 0.033 rad. In contrast, the FPP using the industrial camera has a fringe contrast ratio of 0.715, nonlinear carrier phase aberration value of 0.5 rad, nonlinear phase error of 0.05 rad and RMS random phase error of 0.011 rad. Good performance is achieved by using the FPP composed of an iphone7 and a mini projector. 3D information of a facemask with a size for an adult is also measured by using the FPP that uses portable consumer devices. After the system calibration, the 3D absolute information of the facemask is obtained. The measured results are in good agreement with the ones that are carried out in a traditional way. Our results show that it is possible to use portable consumer devices to construct a good FPP, which is useful for ordinary people to get 3D information in their daily lives.

Phase accuracy evaluation for phase-shifting fringe projection profilometry based on uniform-phase coded image

NASA Astrophysics Data System (ADS)

Zhang, Chunwei; Zhao, Hong; Zhu, Qian; Zhou, Changquan; Qiao, Jiacheng; Zhang, Lu

2018-06-01

Phase-shifting fringe projection profilometry (PSFPP) is a three-dimensional (3D) measurement technique widely adopted in industry measurement. It recovers the 3D profile of measured objects with the aid of the fringe phase. The phase accuracy is among the dominant factors that determine the 3D measurement accuracy. Evaluation of the phase accuracy helps refine adjustable measurement parameters, contributes to evaluating the 3D measurement accuracy, and facilitates improvement of the measurement accuracy. Although PSFPP has been deeply researched, an effective, easy-to-use phase accuracy evaluation method remains to be explored. In this paper, methods based on the uniform-phase coded image (UCI) are presented to accomplish phase accuracy evaluation for PSFPP. These methods work on the principle that the phase value of a UCI can be manually set to be any value, and once the phase value of a UCI pixel is the same as that of a pixel of a corresponding sinusoidal fringe pattern, their phase accuracy values are approximate. The proposed methods provide feasible approaches to evaluating the phase accuracy for PSFPP. Furthermore, they can be used to experimentally research the property of the random and gamma phase errors in PSFPP without the aid of a mathematical model to express random phase error or a large-step phase-shifting algorithm. In this paper, some novel and interesting phenomena are experimentally uncovered with the aid of the proposed methods.

High-speed real-time 3-D coordinates measurement based on fringe projection profilometry considering camera lens distortion

NASA Astrophysics Data System (ADS)

Feng, Shijie; Chen, Qian; Zuo, Chao; Sun, Jiasong; Yu, Shi Ling

2014-10-01

Optical three-dimensional (3-D) profilometry is gaining increasing attention for its simplicity, flexibility, high accuracy, and non-contact nature. Recent advances in imaging sensors and digital projection technology further its progress in high-speed, real-time applications, enabling 3-D shapes reconstruction of moving objects and dynamic scenes. However, the camera lens is never perfect and the lens distortion does influence the accuracy of the measurement result, which is often overlooked in the existing real-time 3-D shape measurement systems. To this end, here we present a novel high-speed real-time 3-D coordinates measuring technique based on fringe projection with the consideration of the camera lens distortion. A pixel mapping relation between a distorted image and a corrected one is pre-determined and stored in computer memory for real-time fringe correction. The out-of-plane height is obtained firstly and the acquisition for the two corresponding in-plane coordinates follows on the basis of the solved height. Besides, a method of lookup table (LUT) is introduced as well for fast data processing. Our experimental results reveal that the measurement error of the in-plane coordinates has been reduced by one order of magnitude and the accuracy of the out-plane coordinate been tripled after the distortions being eliminated. Moreover, owing to the generated LUTs, a 3-D reconstruction speed of 92.34 frames per second can be achieved.

Chemical imaging of drug delivery systems with structured surfaces-a combined analytical approach of confocal raman microscopy and optical profilometry.

PubMed

Kann, Birthe; Windbergs, Maike

2013-04-01

Confocal Raman microscopy is an analytical technique with a steadily increasing impact in the field of pharmaceutics as the instrumental setup allows for nondestructive visualization of component distribution within drug delivery systems. Here, the attention is mainly focused on classic solid carrier systems like tablets, pellets, or extrudates. Due to the opacity of these systems, Raman analysis is restricted either to exterior surfaces or cross sections. As Raman spectra are only recorded from one focal plane at a time, the sample is usually altered to create a smooth and even surface. However, this manipulation can lead to misinterpretation of the analytical results. Here, we present a trendsetting approach to overcome these analytical pitfalls with a combination of confocal Raman microscopy and optical profilometry. By acquiring a topography profile of the sample area of interest prior to Raman spectroscopy, the profile height information allowed to level the focal plane to the sample surface for each spectrum acquisition. We first demonstrated the basic principle of this complementary approach in a case study using a tilted silica wafer. In a second step, we successfully adapted the two techniques to investigate an extrudate and a lyophilisate as two exemplary solid drug carrier systems. Component distribution analysis with the novel analytical approach was neither hampered by the curvature of the cylindrical extrudate nor the highly structured surface of the lyophilisate. Therefore, the combined analytical approach bears a great potential to be implemented in diversified fields of pharmaceutical sciences.

UAEMIAAE

Atmospheric Science Data Center

2013-12-19

UAEMIAAE Aerosol product. ( File version details ) File version  F07_0015  has better ... properties. File version  F08_0016  has improved cloud screening procedure resulting in better aerosol optical depth. ... Coverage:  August - October 2004 File Format:  HDF-EOS Tools:  FTP Access: Data Pool ...

Premier(e) Books.

ERIC Educational Resources Information Center

Searcher, 1999

1999-01-01

This month's previewed book is "Neal-Schuman Authoritative Guide To Evaluating Information on the Internet" by Alison Cooke. The excerpted chapter, "Evaluating Particular Types of Sources," looks at a variety of Internet sources, such as organizational World Wide Web sites, personal home pages, FTP archives, current awareness…

Decade of Change.

ERIC Educational Resources Information Center

Hunter, Leslie Gene

1995-01-01

Discusses advancements in the field of history-related computer-assisted instruction and research. Describes the components of Historiography and Methods of Research, a class that introduces history students to such practical applications as the World Wide Web (WWW), File Transfer Protocol (FTP), listservs, archival access, and others. Briefly…

An Internet Primer for Community College Administrators.

ERIC Educational Resources Information Center

Brumbaugh, Kenneth E.; McRae, Mary S.

1995-01-01

Provides information designed to assist administrators in utilizing the advanced information technologies available on the Internet. Describes the uses of such elements of the Internet as "e-mail,""ftp (file transfer protocol),""gopher," and "telnet." Indicates that administrators can use the internet to…

A Beginner's Guide to the Internet.

ERIC Educational Resources Information Center

McAdams, Charles A.; Nelson, Mark A.

1995-01-01

Maintains that the Internet offers services and opportunities for music teachers and students. Provides an overview of topics such as electronic mail, File Transfer Protocol (FTP), Gopher, and the World Wide Web (WWW). Includes two lists of music resources available on the Internet. (CFR)

How To Get Your Web Page Noticed.

ERIC Educational Resources Information Center

Schrock, Kathleen

1997-01-01

Presents guidelines for making a Web site noticeable. Discusses submitting the URL to directories, links, and announcement lists, and sending the site over the server via FTP to search engines. Describes how to index the site with "Title,""Heading," and "Meta" tags. (AEF)

Evidence of discrimination against BME nurses revealed.

PubMed

Longhurst, Chris

2017-04-27

University of Greenwich researchers responded to an advert from the Nursing and Midwifery Council (NMC) offering funding for an investigation into its fitness-to-practise (FtP) processes amid concerns about the treatment of NHS staff from black and minority ethnic (BME) backgrounds.

40 CFR 88.311-93 - Emissions standards for Inherently Low-Emission Vehicles.

Code of Federal Regulations, 2010 CFR

2010-07-01

... fuel temperature range of 72°-96 °F (22°-36 °C), as appropriate for the applicable FTP regulations (40.... (c) Light-duty vehicles and light-duty trucks. ILEVs in LDV and LDT classes shall have exhaust...

USAID Expands eMODIS Coverage for Famine Early Warning

NASA Astrophysics Data System (ADS)

Jenkerson, C.; Meyer, D. J.; Evenson, K.; Merritt, M.

2011-12-01

Food security in countries at risk is monitored by U.S. Agency for International Development (USAID) through its Famine Early Warning Systems Network (FEWS NET) using many methods including Moderate Resolution Imaging Spectroradiometer (MODIS) data processed by U.S. Geological Survey (USGS) into eMODIS Normalized Difference Vegetation Index (NDVI) products. Near-real time production is used comparatively with trends derived from the eMODIS archive to operationally monitor vegetation anomalies indicating threatened cropland and rangeland conditions. eMODIS production over Central America and the Caribbean (CAMCAR) began in 2009, and processes 10-day NDVI composites every 5 days from surface reflectance inputs produced using predicted spacecraft and climatology information at Land and Atmosphere Near real time Capability for Earth Observing Systems (EOS) (LANCE). These expedited eMODIS composites are backed by a parallel archive of precision-based NDVI calculated from surface reflectance data ordered through Level 1 and Atmosphere Archive and Distribution System (LAADS). Success in the CAMCAR region led to the recent expansion of eMODIS production to include Africa in 2010, and Central Asia in 2011. Near-real time 250-meter products are available for each region on the last day of an acquisition interval (generally before midnight) from an anonymous file transfer protocol (FTP) distribution site (ftp://emodisftp.cr.usgs.gov/eMODIS). The FTP site concurrently hosts the regional historical collections (2000 to present) which are also searchable using the USGS Earth Explorer (http://edcsns17.cr.usgs.gov/NewEarthExplorer). As eMODIS coverage continues to grow, these geographically gridded, georeferenced tagged image file format (GeoTIFF) NDVI composites increase their utility as effective tools for operational monitoring of near-real time vegetation data against historical trends.

Laboratory microwave, millimeter wave and far-infrared spectra of dimethyl sulfide

NASA Astrophysics Data System (ADS)

Jabri, A.; Van, V.; Nguyen, H. V. L.; Mouhib, H.; Kwabia Tchana, F.; Manceron, L.; Stahl, W.; Kleiner, I.

2016-05-01

Context. Dimethyl sulfide, CH3SCH3 (DMS), is a nonrigid, sulfur-containing molecule whose astronomical detection is considered to be possible in the interstellar medium. Very accurate spectroscopic constants were obtained by a laboratory analysis of rotational microwave and millimeter wave spectra, as well as rotation-torsional far-infrared (FIR) spectra, which can be used to predict transition frequencies for a detection in interstellar sources. Aims: This work aims at the experimental study and theoretical analysis of the ground torsional state and ground torsional band ν15 of DMS in a large spectral range for astrophysical use. Methods: The microwave spectrum was measured in the frequency range 2-40 GHz using two Molecular Beam Fourier Transform MicroWave (MB-FTMW) spectrometers in Aachen, Germany. The millimeter spectrum was recorded in the 50-110 GHz range. The FIR spectrum was measured for the first time at high resolution using the FT spectrometer and the newly built cryogenic cell at the French synchrotron SOLEIL. Results: DMS has two equivalent methyl internal rotors with a barrier height of about 730 cm-1. We performed a fit, using the XIAM and BELGI-Cs-2Tops codes, that contained the new measurements and previous transitions reported in the literature for the ground torsional state νt = 0 (including the four torsional species AA, AE, EA and EE) and for the ground torsional band ν15 = 1 ← 0 (including only the AA species). In the microwave region, we analyzed 584 transitions with J ≤ 30 of the ground torsional state νt = 0 and 18 transitions with J ≤ 5 of the first excited torsional state νt = 1. In the FIR range, 578 transitions belonging to the torsional band ν15 = 1 ← 0 with J ≤ 27 were assigned. Totally, 1180 transitions were included in a global fit with 21 accurately determined parameters. These parameters can be used to produce a reliable line-list for an astrophysical detection of DMS. Full Tables B.1 and C.1, and Table E.1 are only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (ftp://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/589/A127

Effect of Different Agrobacterium rhizogenes Strains on Hairy Root Induction and Phenylpropanoid Biosynthesis in Tartary Buckwheat (Fagopyrum tataricum Gaertn)

PubMed Central

Thwe, Aye; Valan Arasu, Mariadhas; Li, Xiaohua; Park, Chang Ha; Kim, Sun Ju; Al-Dhabi, Naif Abdullah; Park, Sang Un

2016-01-01

The development of an efficient protocol for successful hairy root induction by Agrobacterium rhizogenes is the key step toward an in vitro culturing method for the mass production of secondary metabolites. The selection of an effective Agrobacterium strain for the production of hairy roots is highly plant species dependent and must be determined empirically. Therefore, our goal was to investigate the transformation efficiency of different A. rhizogenes strains for the induction of transgenic hairy roots in Fagopyrum tataricum ‘Hokkai T10’ cultivar; to determine the expression levels of the polypropanoid biosynthetic pathway genes, such as ftpAL, FtC4H, Ft4CL, FrCHS, FrCH1, FrF3H, FtFLS1, FtFLS2, FtF3, H1, FtF3′H2, FtANS, and FtDFR; and to quantify the in vitro synthesis of phenolic compounds and anthocyanins. Among different strains, R1000 was the most promising candidate for hairy root stimulation because it induced the highest growth rate, root number, root length, transformation efficiency, and total anthocyanin and rutin content. The R1000, 15834, and A4 strains provided higher transcript levels for most metabolic pathway genes for the synthesis of rutin (22.31, 15.48, and 13.04 μg/mg DW, respectively), cyanidin 3-O-glucoside (800, 750, and 650 μg/g DW, respectively), and cyanidin 3-O-rutinoside (2410, 1530, and 1170 μg/g DW, respectively). A suitable A. rhizogenes strain could play a vital role in the fast growth of the bulk amount of hairy roots and secondary metabolites. Overall, R1000 was the most promising strain for hairy root induction in buckwheat. PMID:27014239

SAGE III L2 Solar Event Species Profiles (Binary)

Atmospheric Science Data Center

2016-06-14

... Search and Order:  Earthdata Search   FTP Access:  Data Pool V3  |  Data Pool V4 Parameters:  Aerosol ... Data Additional Info:  Data Format: Big Endian/IEEE Binary; Avg Size in MB: 0.044 SCAR-B Block:  ...

Effects of High Power Lasers, Number 4

DTIC Science & Technology

1974-10-31

KhMM FMiM FTP FTT FZh GiA GiK IAN Arm IAN Az Avtomatika i tclctnukhanika Acta physica polonica Akadcmiya na,uk Armyanskoy SSR. Doklady...obraztsy, tovarnyye znaki Postepy firyki Physics abstracts Prikladnaya mekhanikö Prikladnaya matcmatika i mckhanika Physica status solidi Pribory i

Collecting and Animating Online Satellite Images.

ERIC Educational Resources Information Center

Irons, Ralph

1995-01-01

Describes how to generate automated classroom resources from the Internet. Topics covered include viewing animated satellite weather images using file transfer protocol (FTP); sources of images on the Internet; shareware available for viewing images; software for automating image retrieval; procedures for animating satellite images; and storing…

Keeping Up with the Internet.

ERIC Educational Resources Information Center

Dealy, Jacqueline

1994-01-01

Offers instructions and resources for Internet novices wanting to access Internet services. Instructions are offered for connecting to 13 education listservs, 9 electronic journals and newsletters, 3 education databases, 7 Telnet gopher sites, Veronica and Archie search tools, and File Transfer Protocol (FTP). (Contains 16 references.) (SLW)

Australian Academic Use of the Internet.

ERIC Educational Resources Information Center

Applebee, Andrelyn C.; Clayton, Peter; Pascoe, Celina

1997-01-01

A study of academic staff at the University of Canberra (Australia) in 1995 determined use of electronic mail, Telnet, file transfer protocol (FTP) software, World Wide Web, library and document delivery services, discussion groups, and student communication. Examined demographic characteristics of faculty (discipline, employment status, gender,…

Navigating the Internet: Evaluating Gopher Clients for Windows.

ERIC Educational Resources Information Center

Lonardo, Angela; And Others

1995-01-01

Identifies and discusses the criteria that end users might employ when evaluating a gopher client, particularly for the Windows environment. Topics include cost and availability, help features, functionality, viewing, searching, navigating, bookmarks, retrieving and displaying files, robustness, and gopher clients available via FTP (file transfer…

The Mankato State Graduate Level Internet Course.

ERIC Educational Resources Information Center

Birmingham, Frank R.

1994-01-01

Describes a beginning Internet course at Mankato State University (Minnesota) designed for preservice and inservice school library media professionals and students. The course addresses the following topics: electronic mail; LISTSERVs; news services; gophering; FTP; and telneting. Other skills such as downloading and locating resources are also…

FloCon 2006 Proceedings

DTIC Science & Technology

2006-10-01

SNORT: KICKASS_PORN DRAGON: PORN HARDCORE SOURCEDEST SOURCE SOURCE SOURCE DEST DEST DEST DEST Stepping stone 51.251.22.183 Username password Sept...possibly initiates more DNS requests for media such as images and video . 7. Browser initiates more HTTP and/or FTP requests for media. Web Surfing in

Transit Timing Observations from Kepler. IX. Catalog of the Full Long-cadence Data Set

NASA Astrophysics Data System (ADS)

Holczer, Tomer; Mazeh, Tsevi; Nachmani, Gil; Jontof-Hutter, Daniel; Ford, Eric B.; Fabrycky, Daniel; Ragozzine, Darin; Kane, Mackenzie; Steffen, Jason H.

2016-07-01

We present a new transit timing catalog of 2599 Kepler Objects of Interest (KOIs), using the PDC-MAP long-cadence light curves that include the full 17 quarters of the mission (ftp://wise-ftp.tau.ac.il/pub/tauttv/TTV/ver_112). The goal is to produce an easy-to-use catalog that can stimulate further analyses of interesting systems. For 779 KOIs with high enough S/N, we derived the timing, duration, and depth of 69,914 transits. For 1820 KOIs with lower SNR, we derived only the timing of 225,273 transits. After removal of outlier timings, we derived various statistics for each KOI that were used to indicate significant variations. Including systems found by previous works, we have detected 260 KOIs that showed significant TTVs with long-term variations (>100 days), and another 14 KOIs with periodic modulations shorter than 100 days and small amplitudes. For five of those, the periodicity is probably due to the crossing of rotating stellar spots by the transiting planets.

The Space Shuttle focused-technology program - Lessons learned

NASA Technical Reports Server (NTRS)

Fitzgerald, P. E., Jr.; Gabris, E. A.

1983-01-01

The results of a focused technology program (FTP), its management structure, the development of the Space Shuttle, and lessons applicable to future space programs such as a space station are discussed. A committee was formed by NASA in 1969 to define the technologies necessary for a reusable spacecraft. Basic and applied research assessments were featured at the beginning of the process. Working groups were established to cover all necessary areas, e.g., Operations, Structures and Materials, Aerothermodynamics, etc., and tasks were distributed to appropriate NASA centers. Funding was drawn from existing budgets. The FTP proceeded successfully because of an understanding of the respective roles of industry and government, the willingness of industry to invest early in a new technology, and the unclassified status of information generated by the program. The in-house design and technology transfer methods that brought the project to a technology demonstration phase are explored, noting the necessity for users to take part in the development within their field.

sAPP modulates iron efflux from brain microvascular endothelial cells by stabilizing the ferrous iron exporter ferroportin

PubMed Central

McCarthy, Ryan C; Park, Yun-Hee; Kosman, Daniel J

2014-01-01

A sequence within the E2 domain of soluble amyloid precursor protein (sAPP) stimulates iron efflux. This activity has been attributed to a ferroxidase activity suggested for this motif. We demonstrate that the stimulation of efflux supported by this peptide and by sAPPα is due to their stabilization of the ferrous iron exporter, ferroportin (Fpn), in the plasma membrane of human brain microvascular endothelial cells (hBMVEC). The peptide does not bind ferric iron explaining why it does not and thermodynamically cannot promote ferrous iron autoxidation. This peptide specifically pulls Fpn down from the plasma membrane of hBMVEC; based on these results, FTP, for ferroportin-targeting peptide, correctly identifies the function of this peptide. The data suggest that in stabilizing Fpn via the targeting due to the FTP sequence, sAPP will increase the flux of iron into the cerebral interstitium. This inference correlates with the observation of significant iron deposition in the amyloid plaques characteristic of Alzheimer’s disease. PMID:24867889

Targeting the latent cytomegalovirus reservoir with an antiviral fusion toxin protein

PubMed Central

Krishna, B. A.; Spiess, K.; Poole, E. L.; Lau, B.; Voigt, S.; Kledal, T. N.; Rosenkilde, M. M.; Sinclair, J. H.

2017-01-01

Reactivation of human cytomegalovirus (HCMV) in transplant recipients can cause life-threatening disease. Consequently, for transplant recipients, killing latently infected cells could have far-reaching clinical benefits. In vivo, myeloid cells and their progenitors are an important site of HCMV latency, and one viral gene expressed by latently infected myeloid cells is US28. This viral gene encodes a cell surface G protein-coupled receptor (GPCR) that binds chemokines, triggering its endocytosis. We show that the expression of US28 on the surface of latently infected cells allows monocytes and their progenitor CD34+ cells to be targeted and killed by F49A-FTP, a highly specific fusion toxin protein that binds this viral GPCR. As expected, this specific targeting of latently infected cells by F49A-FTP also robustly reduces virus reactivation in vitro. Consequently, such specific fusion toxin proteins could form the basis of a therapeutic strategy for eliminating latently infected cells before haematopoietic stem cell transplantation. PMID:28148951

Teleradiology costs in a rural area

NASA Astrophysics Data System (ADS)

Chimiak, William J.

1994-05-01

There have been several excellent papers providing architectures for teleradiology. Effective teleradiology systems can be fielded today. However, cost issues arise which easily blur a decision to deploy a teleradiology system for a given hospital or regional hospital system. In this paper, a T1 infrastructure is assumed that is comprised of dedicated T1 links as well as fractional T1 links. The effects of teleconferencing are included in the analysis. Plots of the telecommunication costs provide visualization of the cost and performance issues as a function of varying degrees teleradiology and teleconference utilization. 1993 tariffs in North Carolina will be used as a baseline to arrive at some basic teleradiology cost plots and metrics. The graphs are produced by gnuplot that is freely available on many anonymous ftp sites and runs on Unix workstations as well as personal computers. The plotting commands used for the graphs are available at The Bowman Gray School of Medicine of Wake Forest University anonymous ftp site.

An interactive environment for the analysis of large Earth observation and model data sets

NASA Technical Reports Server (NTRS)

Bowman, Kenneth P.; Walsh, John E.; Wilhelmson, Robert B.

1994-01-01

Envision is an interactive environment that provides researchers in the earth sciences convenient ways to manage, browse, and visualize large observed or model data sets. Its main features are support for the netCDF and HDF file formats, an easy to use X/Motif user interface, a client-server configuration, and portability to many UNIX workstations. The Envision package also provides new ways to view and change metadata in a set of data files. It permits a scientist to conveniently and efficiently manage large data sets consisting of many data files. It also provides links to popular visualization tools so that data can be quickly browsed. Envision is a public domain package, freely available to the scientific community. Envision software (binaries and source code) and documentation can be obtained from either of these servers: ftp://vista.atmos.uiuc.edu/pub/envision/ and ftp://csrp.tamu.edu/pub/envision/. Detailed descriptions of Envision capabilities and operations can be found in the User's Guide and Reference Manuals distributed with Envision software.

Masses and luminosities for 342 stars from the PennState-Toruń Centre for Astronomy Planet Search

NASA Astrophysics Data System (ADS)

Adamczyk, M.; Deka-Szymankiewicz, B.; Niedzielski, A.

2016-03-01

Aims: We present revised basic astrophysical stellar parameters: the masses, luminosities, ages, and radii for 342 stars from the PennState-Toruń Centre for Astronomy Planet Search. For 327 stars the atmospheric parameters were already available in the literature. For the other 15 objects we also present spectroscopic atmospheric parameters: the effective temperatures, surface gravities, and iron abundances. Methods: Spectroscopic atmospheric parameters were obtained with a standard spectroscopic analysis procedure, using ARES and MOOG, or TGVIT codes. To refine the stellar masses, ages, and luminosities, we applied a Bayesian method. Results: The revised stellar masses for 342 stars and their uncertainties are generally lower than previous estimates. Atmospheric parameters for 13 objects are determined here for the first time. Table 3 is only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (ftp://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/587/A119

Proton irradiation of beryllium deposits on different candidate materials to be used as a neutron production target for accelerator-based BNCT

NASA Astrophysics Data System (ADS)

Gagetti, Leonardo; Anzorena, Manuel Suarez; Bertolo, Alma; del Grosso, Mariela; Kreiner, Andrés J.

2017-12-01

Thin Be targets for neutron production through Be(d,n) are produced and characterized. We improved and characterized the substrate surface, specifically the roughness, in order to achieve homogeneous and stable deposits. Once well bonded deposits were obtained, some of them were irradiated with a 150 keV proton beam and with a 1.45 MeV deuteron beam. Both deposits, pristine and irradiated, were characterized by profilometry, X-ray diffraction, scanning electron microscopy and electron probe microanalyzer.

Droplets act as compass needles for the tension in a membrane

NASA Astrophysics Data System (ADS)

Schulman, Rafael; Ledesma-Alonso, Rene; Salez, Thomas; Raphael, Elie; Dalnoki-Veress, Kari

We present experiments which study droplets atop thin elastomeric films with anisotropic tension. Surprisingly, we find that the droplets are not spherical caps and become elongated along the axis of highest tension. As such, liquid droplets create a map for the principal stress directions in a film. In our experiments, we completely determine the contact line geometry using a combination of contact angle measurements and optical profilometry. In addition, we measure an out-of-plane deformation of the film surrounding the droplet. Simple theoretical arguments successfully capture the experimental findings.

Low pressure cold spraying on materials with low erosion resistance

NASA Astrophysics Data System (ADS)

Shikalov, V. S.; Klinkov, S. V.; Kosarev, V. F.

2017-10-01

In present work, the erosion-adhesion transition was investigated during cold spraying of aluminum particles on brittle ceramic substrates. Cold spraying was carried out with aid of sonic nozzle, which use allows significantly reducing the gas stagnation pressure without the effect of flow separation inside the nozzle and, accordingly, reducing the velocity of the spraying particles. Two stagnation pressures were chosen. The coating tracks were sprayed at different air temperatures in nozzle pre-chamber under each of regimes. Single sprayed tracks were obtained and their profiles were investigated by optical profilometry.

High Voltage TAL Erosion Characterization

NASA Technical Reports Server (NTRS)

Jacobson, David T.

2003-01-01

Extended operation of a D-80 anode layer thruster at high voltage was investigated. The thruster was operated for 1200 hours at 700 Volts and 4 Amperes. Laser profilometry was employed to quantify the erosion of the thruster's graphite guard rings and electrodes at 0, 300, 600, 900, and 1200 hours. Thruster performance and electrical characteristics were monitored over the duration of the investigation. The guard rings exhibited asymmetric erosion that was greatest in the region of the cathode. Erosion of the guard rings exposed the magnet poles between 600 to 900 hours of operation.

40 CFR 600.010-08 - Vehicle test requirements and minimum data requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... data requirements. 600.010-08 Section 600.010-08 Protection of Environment ENVIRONMENTAL PROTECTION... requirements and minimum data requirements. (a) Unless otherwise exempted from specific emission compliance... applicable): (1) The manufacturer shall generate FTP fuel economy data by testing according to the applicable...

Internet for Library Media Specialists.

ERIC Educational Resources Information Center

Simpson, Carol Mann

This guide introduces the library media specialist to the Internet, its history and features, and provides information on specific uses of the Internet in school libraries and specific areas. Section 1, "What is the Internet?" introduces the reader to the Internet; electronic mail; telnet; file transfer protocol (FTP); wide area…

MultiNet TCP/P/IP for VAX/VMS update

NASA Technical Reports Server (NTRS)

Vance, L. Stuart

1991-01-01

Outlines of device support; DECnet interoperability; installation; MultiNet services; domain name server; Telnet; FTP; SMTP; DECwindows over TCP/IP; BSD r services; remote printing; RPC services and NFS server; NFS client; netcontrol; diagnostics; programming support; and MultiNet features are presented in viewgraph format.

Basic Internet Software Toolkit.

ERIC Educational Resources Information Center

Buchanan, Larry

1998-01-01

Once schools are connected to the Internet, the next step is getting network workstations configured for Internet access. This article describes a basic toolkit comprising software currently available on the Internet for free or modest cost. Lists URLs for Web browser, Telnet, FTP, file decompression, portable document format (PDF) reader,…

Evaluating Information on the Internet.

ERIC Educational Resources Information Center

Brandt, D. Scott

1996-01-01

Evaluation of information found on the Internet requires the same assessment of reliability, credibility, perspective, purpose and author credentials as required with print materials. Things to check include whether the source is from a moderated or unmoderated list or FTP (file transfer protocol) site; directories for affiliation and biographical…

The global SMOS Level 3 daily soil moisture and brightness temperature maps

NASA Astrophysics Data System (ADS)

Bitar, Ahmad Al; Mialon, Arnaud; Kerr, Yann H.; Cabot, François; Richaume, Philippe; Jacquette, Elsa; Quesney, Arnaud; Mahmoodi, Ali; Tarot, Stéphane; Parrens, Marie; Al-Yaari, Amen; Pellarin, Thierry; Rodriguez-Fernandez, Nemesio; Wigneron, Jean-Pierre

2017-06-01

The objective of this paper is to present the multi-orbit (MO) surface soil moisture (SM) and angle-binned brightness temperature (TB) products for the SMOS (Soil Moisture and Ocean Salinity) mission based on a new multi-orbit algorithm. The Level 3 algorithm at CATDS (Centre Aval de Traitement des Données SMOS) makes use of MO retrieval to enhance the robustness and quality of SM retrievals. The motivation of the approach is to make use of the longer temporal autocorrelation length of the vegetation optical depth (VOD) compared to the corresponding SM autocorrelation in order to enhance the retrievals when an acquisition occurs at the border of the swath. The retrieval algorithm is implemented in a unique operational processor delivering multiple parameters (e.g. SM and VOD) using multi-angular dual-polarisation TB from MO. A subsidiary angle-binned TB product is provided. In this study the Level 3 TB V310 product is showcased and compared to SMAP (Soil Moisture Active Passive) TB. The Level 3 SM V300 product is compared to the single-orbit (SO) retrievals from the Level 2 SM processor from ESA with aligned configuration. The advantages and drawbacks of the Level 3 SM product (L3SM) are discussed. The comparison is done on a global scale between the two datasets and on the local scale with respect to in situ data from AMMA-CATCH and USDA ARS Watershed networks. The results obtained from the global analysis show that the MO implementation enhances the number of retrievals: up to 9 % over certain areas. The comparison with the in situ data shows that the increase in the number of retrievals does not come with a decrease in quality, but rather at the expense of an increased time lag in product availability from 6 h to 3.5 days, which can be a limiting factor for applications like flood forecast but reasonable for drought monitoring and climate change studies. The SMOS L3 soil moisture and L3 brightness temperature products are delivered using an open licence and free of charge using a web application (https://www.catds.fr/sipad/). The RE04 products, versions 300 and 310, used in this paper are also available at ftp://ext-catds-cpdc:catds2010@ftp.ifremer.fr/Land_products/GRIDDED/L3SM/RE04/.

Seven-color Vilnius photometry and classification of stars in the region of the North Ecliptic Pole

NASA Astrophysics Data System (ADS)

Zdanavičius, K.; Straižys, V.; Zdanavičius, J.; Chmieliauskaitė, R.; Kazlauskas, A.

2012-08-01

The results of photometry of 948 stars down to V = 16.2 mag in the Vilnius seven-color system at the North Ecliptic Pole (NEP) are presented. Among them, 293 stars have all seven magnitudes, 331 stars have no ultraviolet magnitudes and 324 stars have no ultraviolet and violet magnitudes. Photometric data are used to classify about 500 stars in spectral and luminosity classes. For the remaining stars one-dimensional spectral classes are given. Some stars are suspected as new F and G subdwarfs and metal-deficient giants. The dependence of interstellar extinction on distance in the direction of NEP is discussed. The average extinction in the area for stars with d > 500 pc is found to be AV = 0.10 ± 0.01 mag, with the standard deviation 0.14 mag. The results of photometry and classification can be used to supplement the catalog of Gaia standard stars near the Ecliptic poles. To facilitate this, we present transformation of the Vilnius magnitudes to the magnitudes of the SDSS and Gaia systems. Full Tables 2 and 3 are only available in electronic form at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/544/A49.

40 CFR 600.010-08 - Vehicle test requirements and minimum data requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., US06, SC03 and Cold temperature FTP data from each subconfiguration included within the model type. (2... data requirements. 600.010-08 Section 600.010-08 Protection of Environment ENVIRONMENTAL PROTECTION... Provisions § 600.010-08 Vehicle test requirements and minimum data requirements. (a) Unless otherwise...

Efficient Security Mechanisms for the Border Gateway Routing Protocol

DTIC Science & Technology

1997-08-22

Finding Algorithm for Loop- Free Routing. IEEE/ACM Transactions on Networking, 5(1):148{160, Feb. 1997. [7] International Standards Organization. ISO/IEC...Jersey 07974, Feb. 1985. ftp://netlib.att.com/netlib/att/cs/ cstr /117.ps.Z. [16] S. L. Murphy. Presentation in Panel on \\Security Architecture for the

The Defense Message System and the U.S. Coast Guard

DTIC Science & Technology

1992-06-01

these mail services, the Internet also provides a File Transfer Protocol (FTP) and remote login between host computers (TELNET) capabilities. 17 [Ref...the Joint Maritime Intelligence Element (JMIE), Zincdust, and Emerald . [Ref. 27] 4. Secure Data Network The Coast Guard’s Secure Data Network (SDN

GLCF: Recent News

Science.gov Websites

global carbon cycle" is published in Nature Communications. October 2016 2015 Water Frequency Beta Release 2015 Water Frequency Beta Release The water frequency product for 2015 is now available via FTP and 2 data for improving our Tree and Water cover product. For more infomration about the project

40 CFR 86.213-11 - Fuel specifications.

Code of Federal Regulations, 2011 CFR

2011-07-01

...-Duty Passenger Vehicles; Cold Temperature Test Procedures § 86.213-11 Fuel specifications. (a) Gasoline... the text in this section follows: Table—Cold CO Fuel Specifications Item ASTM test Cold CO low octane.... Diesel test fuel used for cold temperature FTP testing under part 600 of this chapter must be a winter...

40 CFR 86.213-11 - Fuel specifications.

Code of Federal Regulations, 2013 CFR

2013-07-01

...-Duty Passenger Vehicles; Cold Temperature Test Procedures § 86.213-11 Fuel specifications. (a) Gasoline... the text in this section follows: Table—Cold CO Fuel Specifications Item ASTM test Cold CO low octane.... Diesel test fuel used for cold temperature FTP testing under part 600 of this chapter must be a winter...

40 CFR 86.213-11 - Fuel specifications.

Code of Federal Regulations, 2010 CFR

2010-07-01

...-Duty Passenger Vehicles; Cold Temperature Test Procedures § 86.213-11 Fuel specifications. (a) Gasoline... the text in this section follows: Table—Cold CO Fuel Specifications Item ASTM test Cold CO low octane.... Diesel test fuel used for cold temperature FTP testing under part 600 of this chapter must be a winter...

40 CFR 86.213-11 - Fuel specifications.

Code of Federal Regulations, 2012 CFR

2012-07-01

...-Duty Passenger Vehicles; Cold Temperature Test Procedures § 86.213-11 Fuel specifications. (a) Gasoline... the text in this section follows: Table—Cold CO Fuel Specifications Item ASTM test Cold CO low octane.... Diesel test fuel used for cold temperature FTP testing under part 600 of this chapter must be a winter...

Soviet Material on Internal Wave Effects, No. 4, September 1975

DTIC Science & Technology

1975-09-01

UzbSSR DBAN EOM FAiO FGiV FiKhOM F-KhMM FMiM FTP FTT FZh GiA GiK IAN Arm IAN Az Avtomatika i telemekhanika Acta physica polonica ...promyshlennyye obraztsy, tovarnyye znaki Postepy fizyki Physics abstracts Prikladnaya mekhanika Prikladnaya matematika i mekhanika Physica status

Quick Access: Find Statistical Data on the Internet.

ERIC Educational Resources Information Center

Su, Di

1999-01-01

Provides an annotated list of Internet sources (World Wide Web, ftp, and gopher sites) for current and historical statistical business data, including selected interest rates, the Consumer Price Index, the Producer Price Index, foreign currency exchange rates, noon buying rates, per diem rates, the special drawing right, stock quotes, and mutual…

How I Found Out about the Internet.

ERIC Educational Resources Information Center

Pawloski, Bob

1994-01-01

A Nebraska consultant/former teacher explains his role in developing Internet accounts for teachers while working on a wetlands distance-learning project and an arts-education consortium. He explains ARTnet and other Internet services, including Telnet, FTP (file transfer protocol), the Gopher retrieval system, NetNews, and Listservs. Sidebars…

A Guide for Using the Internet.

ERIC Educational Resources Information Center

Brown, Herb

This manual provides an instructional overview of Internet resources with student exercises. The work consists of nine chapters: (1) Introduction to the Internet; (2) How to Access the Internet; (3) Electronic Mail; (4) Gopher; (5) File Transfer Protocol-FTP; (6) Newsgroups & Newsreaders; (7) Telnet & TN3270; (8) World Wide Web; and (9)…

A Scholar's Journey: Using the Internet for Adult and Distance Education Research.

ERIC Educational Resources Information Center

Ellsworth, Jill H.

1993-01-01

Discusses use of the Internet for research on adult and distance education. Highlights include a description of the Internet; scholarly discussion lists; Telnet; FTP (File Transfer Protocol); scholarship and research, including access to university library catalogs and electronic journals; and online information about networks, including user…

Techtalk: Telecommunications for Improving Developmental Education.

ERIC Educational Resources Information Center

Caverly, David C.; Broderick, Bill

1993-01-01

Explains how to access the Internet, discussing hardware and software considerations, connectivity, and types of access available to users. Describes the uses of electronic mail; TELNET, a method for remotely logging onto another computer; and anonymous File Transfer Protocol (FTP), a method for downloading files from a remote computer. (MAB)

Distance Education: The Technology--What You Need To Know To Succeed, An Overview.

ERIC Educational Resources Information Center

Riedling, Ann M.

1999-01-01

Explores distance-education evolution and research concerning distance-learning formats. Outlines nine mechanisms (electronic-mail, discussion lists/limited conferencing, telnet, FTP/Gopher, WWW, SLIP/PPP, advanced conferencing software, proprietary software vs. open standards, virtual reality) of the Internet which provide for fundamental changes…

The University of Minnesota's Internet Gopher System: A Tool for Accessing Network-Based Electronic Information.

ERIC Educational Resources Information Center

Wiggins, Rich

1993-01-01

Describes the Gopher system developed at the University of Minnesota for accessing information on the Internet. Highlights include the need for navigation tools; Gopher clients; FTP (File Transfer Protocol); campuswide information systems; navigational enhancements; privacy and security issues; electronic publishing; multimedia; and future…

CHARACTERIZATION OF EMISSIONS AND FUEL ECONOMY OF IN-USE DIESEL AUTOMOBILES

EPA Science Inventory

Exhaust emissions from twenty 1977-1980 in-use light-duty diesel vehicles were measured to determine the effects of driving cycle, mileage accumulation, and test conditions. Hydrocarbons, CO, CO2, NOx and particulates were measured for the FTP, HFET, CFDS, NYCC, 50 mph cruise (50...

40 CFR 86.1828-01 - Emission data vehicle selection.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., considering all exhaust emission constituents, all exhaust test procedures, and the potential impact of air conditioning on test results. The selected vehicle will include an air conditioning engine code unless the.... (a) FTP and SFTP testing. Within each test group, the vehicle configuration shall be selected which...

40 CFR 86.1828-01 - Emission data vehicle selection.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., considering all exhaust emission constituents, all exhaust test procedures, and the potential impact of air conditioning on test results. The selected vehicle will include an air conditioning engine code unless the.... (a) FTP and SFTP testing. Within each test group, the vehicle configuration shall be selected which...

40 CFR 86.1828-01 - Emission data vehicle selection.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., considering all exhaust emission constituents, all exhaust test procedures, and the potential impact of air conditioning on test results. The selected vehicle will include an air conditioning engine code unless the.... (a) FTP and SFTP testing. Within each test group, the vehicle configuration shall be selected which...

40 CFR 86.1828-01 - Emission data vehicle selection.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., considering all exhaust emission constituents, all exhaust test procedures, and the potential impact of air conditioning on test results. The selected vehicle will include an air conditioning engine code unless the.... (a) FTP and SFTP testing. Within each test group, the vehicle configuration shall be selected which...

Amalgamation of Future Time Orientation, Epistemological Beliefs, Achievement Goals and Study Strategies: Empirical Evidence Established

ERIC Educational Resources Information Center

Phan, Huy P.

2009-01-01

Background: Recently research evidence emphasizes two main lines of inquiry, namely the relations between future time perspective (FTP), achievement goals (mastery, performance-approach, and performance-avoidance) and study processing strategies, and the relations between epistemological beliefs, achievement goals and study processing strategies.…

40 CFR 86.164-00 - Supplemental Federal Test Procedure calculations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... provide the procedures for calculating mass emission results of each regulated exhaust pollutant for the... section. These provisions provide the procedures for determining the weighted mass emissions for the FTP... test results for the SFTP composite (NMHC+NOX) and optional composite CO standards shall be computed by...

40 CFR 86.164-00 - Supplemental Federal Test Procedure calculations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... provide the procedures for calculating mass emission results of each regulated exhaust pollutant for the... section. These provisions provide the procedures for determining the weighted mass emissions for the FTP... test results for the SFTP composite (NMHC+NOX) and optional composite CO standards shall be computed by...

Real-time tricolor phase measuring profilometry based on CCD sensitivity calibration

NASA Astrophysics Data System (ADS)

Zhu, Lin; Cao, Yiping; He, Dawu; Chen, Cheng

2017-02-01

A real-time tricolor phase measuring profilometry (RTPMP) based on charge coupled device (CCD) sensitivity calibration is proposed. Only one colour fringe pattern whose red (R), green (G) and blue (B) components are, respectively, coded as three sinusoidal phase-shifting gratings with an equivalent shifting phase of 2π/3 is needed and sent to an appointed flash memory on a specialized digital light projector (SDLP). A specialized time-division multiplexing timing sequence actively controls the SDLP to project the fringe patterns in R, G and B channels sequentially onto the measured object in one over seventy-two of a second and meanwhile actively controls a high frame rate monochrome CCD camera to capture the corresponding deformed patterns synchronously with the SDLP. So the sufficient information for reconstructing the three-dimensional (3D) shape in one over twenty-four of a second is obtained. Due to the different spectral sensitivity of the CCD camera to RGB lights, the captured deformed patterns from R, G and B channels cannot share the same peak and valley, which will lead to lower accuracy or even failing to reconstruct the 3D shape. So a deformed pattern amending method based on CCD sensitivity calibration is developed to guarantee the accurate 3D reconstruction. The experimental results verify the feasibility of the proposed RTPMP method. The proposed RTPMP method can obtain the 3D shape at over the video frame rate of 24 frames per second, avoid the colour crosstalk completely and be effective for measuring real-time changing object.

An intraoperative spectroscopic imaging system for quantification of Protoporphyrin IX during glioma surgery (Conference Presentation)

NASA Astrophysics Data System (ADS)

Angulo-Rodríguez, Leticia M.; Laurence, Audrey; Jermyn, Michael; Sheehy, Guillaume; Sibai, Mira; Petrecca, Kevin; Roberts, David W.; Paulsen, Keith D.; Wilson, Brian C.; Leblond, Frédéric

2016-03-01

Cancer tissue often remains after brain tumor resection due to the inability to detect the full extent of cancer during surgery, particularly near tumor boundaries. Commercial systems are available for intra-operative real-time aminolevulenic acid (ALA)-induced protoporphyrin IX (PpIX) fluorescence imaging. These are standard white-light neurosurgical microscopes adapted with optical components for fluorescence excitation and detection. However, these instruments lack sensitivity and specificity, which limits the ability to detect low levels of PpIX and distinguish it from tissue auto-fluorescence. Current systems also cannot provide repeatable and un-biased quantitative fluorophore concentration values because of the unknown and highly variable light attenuation by tissue. We present a highly sensitive spectroscopic fluorescence imaging system that is seamlessly integrated onto a neurosurgical microscope. Hardware and software were developed to achieve through-microscope spatially-modulated illumination for 3D profilometry and to use this information to extract tissue optical properties to correct for the effects of tissue light attenuation. This gives pixel-by-pixel quantified fluorescence values and improves detection of low PpIX concentrations. This is achieved using a high-sensitivity Electron Multiplying Charge Coupled Device (EMCCD) with a Liquid Crystal Tunable Filter (LCTF) whereby spectral bands are acquired sequentially; and a snapshot camera system with simultaneous acquisition of all bands is used for profilometry and optical property recovery. Sensitivity and specificity to PpIX is demonstrated using brain tissue phantoms and intraoperative human data acquired in an on-going clinical study using PpIX fluorescence to guide glioma resection.

High definition urethral pressure profilometry: Evaluating a novel microtip catheter.

PubMed

Klünder, Mario; Amend, Bastian; Vaegler, Martin; Kelp, Alexandra; Feuer, Ronny; Sievert, Karl-Dietrich; Stenzl, Arnulf; Sawodny, Oliver; Ederer, Michael

2016-11-01

Urethral pressure profilometry (UPP) is used in the diagnosis of stress urinary incontinence (SUI). SUI is a significant medical, social, and economic problem, affecting about 12.5% of the population. A novel microtip catheter was developed for UPP featuring an inclination sensor and higher angular resolution compared to systems in clinical use today. Therewith, the location of each measured pressure sample can be determined and the spatial pressure distribution inside the urethra reconstructed. In order to assess the performance and plausibility of data from the microtip catheter, we compare it to data from a double balloon air charged system. Both catheters are used on sedated female minipigs. Data from the microtip catheter are processed through a signal reconstruction algorithm, plotted and compared against data from the air-charged catheter. The microtip catheter delivers results in agreement with previous comparisons of microtip and air-charged systems. It additionally provides a new level of detail in the reconstructed UPPs which may lead to new insights into the sphincter mechanism of minipigs. The ability of air-charged catheters to measure pressure circumferentially is widely considered a main advantage over microtip catheters. However, directional pressure readings can provide additional information on angular fluctuations in the urethral pressure distribution. It is shown that the novel microtip catheter in combination with a signal reconstruction algorithm delivers plausible data. It offers the opportunity to evaluate urethral structures, especially the sphincter, in context of the correct location within the anatomical location of the pelvic floor. Neurourol. Urodynam. 35:888-894, 2016. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

Effect of plastic-covered ultrasonic scalers on titanium implant surfaces.

PubMed

Mann, M; Parmar, D; Walmsley, A D; Lea, S C

2012-01-01

Maintaining oral health around titanium implants is essential. The formation of a biofilm on the titanium surface will influence the continuing success of the implant. These concerns have led to modified ultrasonic scaler instruments that look to reduce implant damage while maximising the cleaning effect. This study aimed to assess the effect of instrumentation, with traditional and modified ultrasonic scalers, on titanium implant surfaces and to correlate this with the oscillations of the instruments. Two ultrasonic insert designs (metallic TFI-10 and a plastic-tipped implant insert) were selected. Each scaler probe was scanned using a scanning laser vibrometer, under loaded and unloaded conditions, to determine their oscillation characteristics. Loads were applied against a titanium implant (100g and 200 g) for 10 s. The resulting implant surfaces were then scanned using laser profilometry and scanning electron microscopy (SEM). Insert probes oscillated with an elliptical motion with the maximum amplitude at the probe tip. Laser profilometry detected defects in the titanium surface only for the metallic scaler insert. Defect widths at 200 g high power were significantly larger than all other load/power conditions (P<0.02). Using SEM, it was observed that modifications to the implant surface had occurred following instrumentation with the plastic-tipped insert. Debris was also visible around the defects. Metal scalers produce defects in titanium implant surfaces and load and power are important factors in the damage caused. Plastic-coated scaler probes cause minimal damage to implant surfaces and have a polishing action but can leave plastic deposits behind on the implant surface. © 2011 John Wiley & Sons A/S.

Carrier and aberrations removal in interferometric fringe projection profilometry

NASA Astrophysics Data System (ADS)

Blain, P.; Michel, F.; Renotte, Y.; Habraken, S.

2012-04-01

A profilometer which takes advantage of polarization states splitting technique and monochromatic light projection method as a way to overcome ambient lighting for in-situ measurement is under development [1, 2]. Because of the Savart plate which refracts two out of axis beams, the device suffers from aberrations (mostly coma and astigmatism). These aberrations affect the quality of the sinusoidal fringe pattern. In fringe projection profilometry, the unwrapped phase distribution map contains the sum of the object's shape-related phase and carrier-fringe-related phase. In order to extract the 3D shape of the object, the carrier phase has to be removed [3, 4]. An easy way to remove both the fringe carrier and the aberrations of the optical system is to measure the phases of the test object and to measure the phase of a reference plane with the same set up and to subtract both phase maps. This time consuming technique is suitable for laboratory but not for industry. We propose a method to numerically remove both the fringe carrier and the aberrations. A first reference phase of a calibration plane is evaluated knowing the position of the different elements in the set up and the orientation of the fringes. Then a fitting of the phase map by Zernike polynomials is computed [5]. As the triangulation parameters are known during the calibration, the computation of Zernike coefficients has only to be made once. The wavefront error can be adjusted by a scale factor which depends on the position of the test object.

Preventive effect of toothpastes with MMP inhibitors on human dentine erosion and abrasion in vitro

PubMed Central

Hannas, Angelica Reis; Kato, Melissa Thiemi; Cardoso, Cristiane de Almeida Baldini; Magalhães, Ana Carolina; Pereira, José Carlos; Tjäderhane, Leo; Buzalaf, Marília Afonso Rabelo

2016-01-01

ABSTRACT The use of gels and mouthrinses with MMP inhibitors (chlorhexidine, and green tea extract) was shown to prevent erosive wear. The aim of this study was to analyze the protective effect of toothpastes containing MMP inhibitors on dentine loss induced by erosion in vitro. Material and Methods Five groups each containing 12 specimens of human root dentine were prepared. The specimens were subjected to 1 min erosion by immersion in a cola drink, 4 times a day, for 5 d. Each day, after the first and last erosive challenges, the specimens were brushed for 15 s with a slurry of dentifrice and water (1:3) containing placebo, 1,100 ppm fluoride, 0.61% green tea extract, 0.12% chlorhexidine or 0.004% chlorhexidine (commercial toothpaste). Between the acid challenges, the specimens were stored in artificial saliva with remineralizing potential until the next treatment. Dentine loss was determined using profilometry. Data were analyzed using one-way ANOVA after log transform (p<0.05). Results The mean wear values (μm) were as follows: placebo 1.83±0.53; 0.61% green tea extract 1.00±0.21; fluoride 1.27±0.43; 0.12% chlorhexidine 1.19±0.30; and 0.004% chlorhexidine 1.22±0.46. There was a significant difference in wear between placebo and all the treatment toothpastes, which did not differ from each other. Conclusion The results suggest that toothpastes containing MMP inhibitors are as effective as those based on NaF in preventing dentine erosion and abrasion. PMID:27008258

Preventive effect of toothpastes with MMP inhibitors on human dentine erosion and abrasion in vitro.

PubMed

Hannas, Angelica Reis; Kato, Melissa Thiemi; Cardoso, Cristiane de Almeida Baldini; Magalhães, Ana Carolina; Pereira, José Carlos; Tjäderhane, Leo; Buzalaf, Marília Afonso Rabelo

2016-01-01

The use of gels and mouthrinses with MMP inhibitors (chlorhexidine, and green tea extract) was shown to prevent erosive wear. The aim of this study was to analyze the protective effect of toothpastes containing MMP inhibitors on dentine loss induced by erosion in vitro. Five groups each containing 12 specimens of human root dentine were prepared. The specimens were subjected to 1 min erosion by immersion in a cola drink, 4 times a day, for 5 d. Each day, after the first and last erosive challenges, the specimens were brushed for 15 s with a slurry of dentifrice and water (1:3) containing placebo, 1,100 ppm fluoride, 0.61% green tea extract, 0.12% chlorhexidine or 0.004% chlorhexidine (commercial toothpaste). Between the acid challenges, the specimens were stored in artificial saliva with remineralizing potential until the next treatment. Dentine loss was determined using profilometry. Data were analyzed using one-way ANOVA after log transform (p<0.05). The mean wear values (μm) were as follows: placebo 1.83±0.53; 0.61% green tea extract 1.00±0.21; fluoride 1.27±0.43; 0.12% chlorhexidine 1.19±0.30; and 0.004% chlorhexidine 1.22±0.46. There was a significant difference in wear between placebo and all the treatment toothpastes, which did not differ from each other. The results suggest that toothpastes containing MMP inhibitors are as effective as those based on NaF in preventing dentine erosion and abrasion.

A calibration method immune to the projector errors in fringe projection profilometry

NASA Astrophysics Data System (ADS)

Zhang, Ruihua; Guo, Hongwei

2017-08-01

In fringe projection technique, system calibration is a tedious task to establish the mapping relationship between the object depths and the fringe phases. Especially, it is not easy to accurately determine the parameters of the projector in this system, which may induce errors in the measurement results. To solve this problem, this paper proposes a new calibration by using the cross-ratio invariance in the system geometry for determining the phase-to-depth relations. In it, we analyze the epipolar eometry of the fringe projection system. On each epipolar plane, the depth variation along an incident ray induces the pixel movement along the epipolar line on the image plane of the camera. These depth variations and pixel movements can be connected by use of the projective transformations, under which condition the cross-ratio for each of them keeps invariant. Based on this fact, we suggest measuring the depth map by use of this cross-ratio invariance. Firstly, we shift the reference board in its perpendicular direction to three positions with known depths, and measure their phase maps as the reference phase maps; and secondly, when measuring an object, we calculate the object depth at each pixel by equating the cross-ratio of the depths to that of the corresponding pixels having the same phase on the image plane of the camera. This method is immune to the errors sourced from the projector, including the distortions both in the geometric shapes and in the intensity profiles of the projected fringe patterns.The experimental results demonstrate the proposed method to be feasible and valid.

Reduction of bacterial adhesion on dental composite resins by silicon-oxygen thin film coatings.

PubMed

Mandracci, Pietro; Mussano, Federico; Ceruti, Paola; Pirri, Candido F; Carossa, Stefano

2015-01-29

Adhesion of bacteria on dental materials can be reduced by modifying the physical and chemical characteristics of their surfaces, either through the application of specific surface treatments or by the deposition of thin film coatings. Since this approach does not rely on the use of drugs or antimicrobial agents embedded in the materials, its duration is not limited by their possible depletion. Moreover it avoids the risks related to possible cytotoxic effects elicited by antibacterial substances released from the surface and diffused in the surrounding tissues. In this work, the adhesion of Streptococcus mutans and Streptococcus mitis was studied on four composite resins, commonly used for manufacturing dental prostheses. The surfaces of dental materials were modified through the deposition of a-SiO(x) thin films by plasma enhanced chemical vapor deposition. The chemical bonding structure of the coatings was analyzed by Fourier-transform infrared spectroscopy. The morphology of the dental materials before and after the coating deposition was assessed by means of optical microscopy and high-resolution mechanical profilometry, while their wettability was investigated by contact angle measurements. The sample roughness was not altered after coating deposition, while a noticeable increase of wettability was detected for all the samples. Also, the adhesion of S. mitis decreased in a statistically significant way on the coated samples, when compared to the uncoated ones, which did not occur for S. mutans. Within the limitations of this study, a-SiO(x) coatings may affect the adhesion of bacteria such as S. mitis, possibly by changing the wettability of the composite resins investigated.

3-D optical profilometry at micron scale with multi-frequency fringe projection using modified fibre optic Lloyd's mirror technique

NASA Astrophysics Data System (ADS)

Inanç, Arda; Kösoğlu, Gülşen; Yüksel, Heba; Naci Inci, Mehmet

2018-06-01

A new fibre optic Lloyd's mirror method is developed for extracting 3-D height distribution of various objects at the micron scale with a resolution of 4 μm. The fibre optic assembly is elegantly integrated to an optical microscope and a CCD camera. It is demonstrated that the proposed technique is quite suitable and practical to produce an interference pattern with an adjustable frequency. By increasing the distance between the fibre and the mirror with a micrometre stage in the Lloyd's mirror assembly, the separation between the two bright fringes is lowered down to the micron scale without using any additional elements as part of the optical projection unit. A fibre optic cable, whose polymer jacket is partially stripped, and a microfluidic channel are used as test objects to extract their surface topographies. Point by point sensitivity of the method is found to be around 8 μm, changing a couple of microns depending on the fringe frequency and the measured height. A straightforward calibration procedure for the phase to height conversion is also introduced by making use of the vertical moving stage of the optical microscope. The phase analysis of the acquired image is carried out by One Dimensional Continuous Wavelet Transform for which the chosen wavelet is the Morlet wavelet and the carrier removal of the projected fringe patterns is achieved by reference subtraction. Furthermore, flexible multi-frequency property of the proposed method allows measuring discontinuous heights where there are phase ambiguities like 2π by lowering the fringe frequency and eliminating the phase ambiguity.

40 CFR 1066.831 - Exhaust emission test procedures for aggressive driving.

Code of Federal Regulations, 2014 CFR

2014-07-01

... has not remained in an area where ambient temperatures were within the range specified for testing since the previous FTP or HFET. (2) Keep ambient temperatures within the ranges specified for test... the driving schedules specified in this paragraph (b)(3)(ii). You may ask us to use a particular...

Potential Fuel Economy Improvements from the Implementation of cEGR and CDA on an Atkinson Cycle Engine

EPA Science Inventory

Present the implementation of cEGR and CDA on an Atkinson engine and use steady state fuel consumption maps to estimate the technologies’ potential fuel economy improvements over the FTP and Highway tests. In addition to use fuel weighted modes to determine possible fuel economy...

Fuel Economy and Exhaust Emissions Characteristics of a Diesel Vehicle : Results of the Prototype Volkswagen 1.5 Liter Turbocharged Rabbit Tests

DOT National Transportation Integrated Search

1981-01-01

Tests were performed on a prototyple Vokswagen (VW) Turbocharged (TC) Rabbit diesel vehicle on a chassis dynamometer. The vheicle was tested for fuel economy and emissions on the urban Federal test Procedure (FTP), Highway Fuel Economy Test (HFET), C...

Cold Temperature Effects on Speciated VOC Emissions from Modern GDI Light-Duty Vehicles 1

EPA Science Inventory

In this study, speciated VOC emissions were characterized from three modern GDI light-duty vehicles. The vehicles were tested on a chassis dynamometer housed in a climate-controlled chamber at two temperatures (20 and 72 °F) using the EPA Federal Test Procedure (FTP) and a portio...

40 CFR 86.1427 - Certification Short Test procedure; overview.

Code of Federal Regulations, 2010 CFR

2010-07-01

... loaded modes. Specific conditions defined by this test procedure include fuel characteristics, ambient... CO fuel, a moderate temperature test with Cold CO fuel, and a warm temperature test with FTP Otto-cycle test fuel, as described in table O-96-1 of § 86.1430. The manufacturer must complete testing for...

40 CFR 86.1427 - Certification Short Test procedure; overview.

Code of Federal Regulations, 2013 CFR

2013-07-01

... loaded modes. Specific conditions defined by this test procedure include fuel characteristics, ambient... CO fuel, a moderate temperature test with Cold CO fuel, and a warm temperature test with FTP Otto-cycle test fuel, as described in table O-96-1 of § 86.1430. The manufacturer must complete testing for...

40 CFR 86.1427 - Certification Short Test procedure; overview.

Code of Federal Regulations, 2011 CFR

2011-07-01

... loaded modes. Specific conditions defined by this test procedure include fuel characteristics, ambient... CO fuel, a moderate temperature test with Cold CO fuel, and a warm temperature test with FTP Otto-cycle test fuel, as described in table O-96-1 of § 86.1430. The manufacturer must complete testing for...

40 CFR 86.1427 - Certification Short Test procedure; overview.

Code of Federal Regulations, 2012 CFR

2012-07-01

... loaded modes. Specific conditions defined by this test procedure include fuel characteristics, ambient... CO fuel, a moderate temperature test with Cold CO fuel, and a warm temperature test with FTP Otto-cycle test fuel, as described in table O-96-1 of § 86.1430. The manufacturer must complete testing for...

Future Time Perspective, Hope, and Ethnic Identity among African American Adolescents

ERIC Educational Resources Information Center

Adelabu, Detris Honora

2008-01-01

This study examines the relationship of academic achievement to future time perspective (FTP), hope, and ethnic identity among low-income, rural and urban African American adolescents ( N = 661). Findings indicate that adolescents who are oriented toward the future, determined to reach their goals (hope), and interested in and have a strong sense…

40 CFR 86.127-00 - Test procedures; overview.

Code of Federal Regulations, 2013 CFR

2013-07-01

... following emissions: (1) Gaseous exhaust THC, CO, NOX. CO2 (for petroleum-fueled and gaseous- fueled... vehicles). (b) The FTP Otto-cycle exhaust emission test is designed to determine gaseous THC, CO, CO2, CH4... determine gaseous THC, NMHC, CO, CO2, CH4, and NOX emissions from gasoline-fueled or diesel-fueled vehicles...

40 CFR 86.127-00 - Test procedures; overview.

Code of Federal Regulations, 2014 CFR

2014-07-01

... following emissions: (1) Gaseous exhaust THC, CO, NOX. CO2 (for petroleum-fueled and gaseous- fueled... vehicles). (b) The FTP Otto-cycle exhaust emission test is designed to determine gaseous THC, CO, CO2, CH4... determine gaseous THC, NMHC, CO, CO2, CH4, and NOX emissions from gasoline-fueled or diesel-fueled vehicles...

40 CFR 86.127-00 - Test procedures; overview.

Code of Federal Regulations, 2012 CFR

2012-07-01

... following emissions: (1) Gaseous exhaust THC, CO, NOX. CO2 (for petroleum-fueled and gaseous- fueled... vehicles). (b) The FTP Otto-cycle exhaust emission test is designed to determine gaseous THC, CO, CO2, CH4... determine gaseous THC, NMHC, CO, CO2, CH4, and NOX emissions from gasoline-fueled or diesel-fueled vehicles...

Assessing Information on the Internet: Toward Providing Library Services for Computer-Mediated Communication.

ERIC Educational Resources Information Center

Dillon, Martin; And Others

1992-01-01

Describes a project that examined textual information available on the Internet and potential means of providing access to this information. Highlights include an overview of Internet resources, a profile of a document sample, description of FTP (File Transfer Protocol) sites, and an automated method of categorizing files. (MES)

Tools to Ease Your Internet Adventures: Part I.

ERIC Educational Resources Information Center

Descy, Don E.

1993-01-01

This first of a two-part series highlights three tools that improve accessibility to Internet resources: (1) Alex, a database that accesses files in FTP (file transfer protocol) sites; (2) Archie, software that searches for file names with a user's search term; and (3) Gopher, a menu-driven program to access Internet sites. (LRW)

Improving Internet Archive Service through Proxy Cache.

ERIC Educational Resources Information Center

Yu, Hsiang-Fu; Chen, Yi-Ming; Wang, Shih-Yong; Tseng, Li-Ming

2003-01-01

Discusses file transfer protocol (FTP) servers for downloading archives (files with particular file extensions), and the change to HTTP (Hypertext transfer protocol) with increased Web use. Topics include the Archie server; proxy cache servers; and how to improve the hit rate of archives by a combination of caching and better searching mechanisms.…

Why You Should Establish a Connection to the Internet.

ERIC Educational Resources Information Center

Hill, Judy A.; Misic, Mark M.

1996-01-01

Provides the rationale for establishing a connection to the Internet. Describes Internet services, including e-mail, telnet, file transfer protocol (FTP), USENET, gopher, Archie, and World Wide Web. Identifies reasons why the Internet is a valuable tool. Outlines steps for establishing a connection and discusses the future of the Internet. A…

Form and Functions: Publishing the Canadian Government "Weekly Checklist" on the Internet.

ERIC Educational Resources Information Center

Davies, Ron; Chalk, Tanis

1996-01-01

When a Canadian government documents listing was distributed over the Internet, differences were revealed in the design and implementation of print, FTP, Gopher and World Wide Web versions. Publishing form was found to affect: ability to provide specific editions for target audiences, amount of information delivered at one time, presentation…

On the Nets. Comparing Web Browsers: Mosaic, Cello, Netscape, WinWeb and InternetWorks Life.

ERIC Educational Resources Information Center

Notess, Greg R.

1995-01-01

World Wide Web browsers are compared by speed, setup, hypertext transport protocol (HTTP) handling, management of file transfer protocol (FTP), telnet, gopher, and wide area information server (WAIS); bookmark options; and communication functions. Netscape has the most features, the fastest retrieval, sophisticated bookmark capabilities. (JMV)

Computers and Teaching: Evolution of a Cyberclass.

ERIC Educational Resources Information Center

Young, Jerome

1998-01-01

Addresses the role of technology in higher education outlining the various steps in creating a cyberclass: (1) provide access to Web sites on general research; (2) create a class listserv and a FTP site for students to upload coursework; (3) provide access to the syllabus electronically; and (4) teach an entire course online. (CMK)

Citing Internet Addresses: A How-To Guide for Referencing Online Sources in Student Bibliographies. Revised.

ERIC Educational Resources Information Center

McClain, Tim

This paper provides easy-to-understand guidelines for citing online information in student bibliographies. Citation structure and examples are provided for each type of Internet source. Guidelines are included for the following Internet sources: electronic mail; Gopher; File Transfer Protocol (FTP); Telnet; World Wide Web; Usenet Newsgroups;…

Quarterly Update, January-March 1992

DTIC Science & Technology

1992-03-01

representations to support exploiting that commonality. The project used the Feature-Oriented Domain Analysis ( FODA ) method, developed by the project in 1990, in...9 FODA feature-oriented domain analysis ................................... 14 FTP file transfer protocol...concentrations, and product market share for 23 countries. Along with other SEI staff, members of the Rate Monotonic Analysis for Real-Time Systems (RMARTS

My fuel treatment planner: a user guide.

Treesearch

Robin L. Biesecker; Roger D. Fight

2006-01-01

My Fuel Treatment Planner (MyFTP) is a tool for calculating and displaying the financial costs and potential revenues associated with forest fuel reduction treatments. It was designed for fuel treatment planners including those with little or no background in economics, forest management, or timber sales. This guide provides the information needed to acquire, load, and...

The Role of Future Time Perspective in Psychological Contracts: A Study among Older Workers

ERIC Educational Resources Information Center

Bal, P. Matthijs; Jansen, Paul G. W.; van der Velde, Mandy E. G.; de Lange, Annet H.; Rousseau, Denise M.

2010-01-01

Using a sample of post-retirement workers (N = 176), this study investigated the role of future time perspective (FTP) in psychological contracts. The study aimed to test: (i) whether future time perspective is related to employer psychological contract fulfillment and (ii) whether it moderates relations between psychological contract fulfillment…

A Teacher's Project Guide to the Internet.

ERIC Educational Resources Information Center

Crotchett, Kevin R.

This book is a step-by-step guide to the Internet, suggesting creative K-12 classroom projects ranging from one of the most basic Internet functions, e-mail, to one of the more difficult, writing World Wide Web homepages. Intervening chapters describe projects using Usenet Newsgroups, File Transfer Protocols (FTP), Gopher, Veronica, the World Wide…

Internet Services and Academic Work: An Australian Perspective.

ERIC Educational Resources Information Center

Bruce, Harry

1994-01-01

Describes a pilot study examining how Australian academics are using the Australian Academic and Research Network. Ten tables provide details on network services used in relation to academic role, importance of services used and relationship to academic work, and specific applications for e-mail, remote login, news groups and FTP (file transfer…

Climate Prediction Center - Monitoring & Data: Current Monthly Atmospheric

Science.gov Websites

Data > Oceanic & Atmospheric Data > Monthly Atmospheric and SST Indices Alert Climate Diagnostics Bulletin Updates to Climatologies and Indices Beginning with January 2011 Data (To appear in : ftp.cpc.ncep.noaa.gov/wd52dg/data/indices Frequently Asked Questions Questions/comments. Contact: Wei.Shi@noaa.gov To

Analysis of the Enameled AISI 316LVM Stainless Steel

NASA Astrophysics Data System (ADS)

Bukovec, Mitja; Xhanari, Klodian; Lešer, Tadej; Petovar, Barbara; Finšgar, Matjaž

2018-03-01

In this work, four different enamels were coated on AISI 316LVM stainless steel and the corrosion resistance of these samples was tested in 5 wt.% NaCl solution at room temperature. The preparation procedure of the enamels was optimized in terms of firing temperature, time and composition. First the thermal expansion was measured using dilatometry followed by electrochemical analysis using chronopotentiometry, electrochemical impedance spectroscopy and cyclic polarization. The topography of the most resistant sample was obtained by 3D-profilometry. All samples coated with enamel showed significantly higher corrosion and dilatation resistance compared with the uncoated stainless steel material.

Supershear Rayleigh Waves at a Soft Interface

NASA Astrophysics Data System (ADS)

Le Goff, Anne; Cobelli, Pablo; Lagubeau, Guillaume

2013-06-01

We report on the experimental observation of waves at a liquid foam surface propagating faster than the bulk shear waves. The existence of such waves has long been debated, but the recent observation of supershear events in a geophysical context has inspired us to search for their existence in a model viscoelastic system. An optimized fast profilometry technique allows us to observe on a liquid foam surface the waves triggered by the impact of a projectile. At high impact velocity, we show that the expected subshear Rayleigh waves are accompanied by faster surface waves that can be identified as supershear Rayleigh waves.

Measurements of print-through in graphite fiber epoxy composites

NASA Technical Reports Server (NTRS)

Jaworske, Donald A.; Jeunnette, Timothy T.; Anzic, Judith M.

1989-01-01

High-reflectance accurate-contour mirrors are needed for solar dynamic space power systems. Graphite fiber epoxy composites are attractive candidates for such applications owing to their high modulus, near-zero coefficient of thermal expansion, and low mass. However, mirrors prepared from graphite fiber epoxy composite substrates often exhibit print-through, a distortion of the surface, which causes a loss in solar specular reflectance. Efforts to develop mirror substrates without print-through distortion require a means of quantifying print-through. Methods have been developed to quantify the degree of print-through in graphite fiber epoxy composite specimens using surface profilometry.

Acoustic Profiling of Bottom Sediments in Large Oil Storage Tanks

NASA Astrophysics Data System (ADS)

Svet, V. D.; Tsysar', S. A.

2018-01-01

Characteristic features of acoustic profiling of bottom sediments in large oil storage tanks are considered. Basic acoustic parameters of crude oil and bottom sediments are presented. It is shown that, because of the presence of both transition layers in crude oil and strong reverberation effects in oil tanks, the volume of bottom sediments that is calculated from an acoustic surface image is generally overestimated. To reduce the error, additional post-processing of acoustic profilometry data is proposed in combination with additional measurements of viscosity and tank density distributions in vertical at several points of the tank.

Angular distribution of species in pulsed laser deposition of LaxCa1-xMnO3

NASA Astrophysics Data System (ADS)

Ojeda-G-P, Alejandro; Schneider, Christof W.; Döbeli, Max; Lippert, Thomas; Wokaun, Alexander

2015-05-01

The angular distribution of species from a La0.4Ca0.6MnO3 target irradiated with a 248 nm nanosecond pulsed laser was investigated by Rutherford backscattering spectrometry for four different Ar pressures. The film thickness angular distribution was also analyzed using profilometry. Depending on the background gas pressure, the target to substrate distance, and the angular location the film thickness and composition varies considerably. In particular the film composition could vary by up to 17% with respect to the composition of the target material.

Use of mutation spectra analysis software.

PubMed

Rogozin, I; Kondrashov, F; Glazko, G

2001-02-01

The study and comparison of mutation(al) spectra is an important problem in molecular biology, because these spectra often reflect on important features of mutations and their fixation. Such features include the interaction of DNA with various mutagens, the function of repair/replication enzymes, and properties of target proteins. It is known that mutability varies significantly along nucleotide sequences, such that mutations often concentrate at certain positions, called "hotspots," in a sequence. In this paper, we discuss in detail two approaches for mutation spectra analysis: the comparison of mutation spectra with a HG-PUBL program, (FTP: sunsite.unc.edu/pub/academic/biology/dna-mutations/hyperg) and hotspot prediction with the CLUSTERM program (www.itba.mi.cnr.it/webmutation; ftp.bionet.nsc.ru/pub/biology/dbms/clusterm.zip). Several other approaches for mutational spectra analysis, such as the analysis of a target protein structure, hotspot context revealing, multiple spectra comparisons, as well as a number of mutation databases are briefly described. Mutation spectra in the lacI gene of E. coli and the human p53 gene are used for illustration of various difficulties of such analysis. Copyright 2001 Wiley-Liss, Inc.