Evaluation of the Anxiolytic Activity of NR-ANX-C (a Polyherbal Formulation) in Ethanol Withdrawal-Induced Anxiety Behavior in Rats.

PubMed

Mohan, L; Rao, U S C; Gopalakrishna, H N; Nair, V

2011-01-01

The present study investigates the anxiolytic activity of NR-ANX-C, a standardized polyherbal formulation containing the extracts of Withania somnifera, Ocimum sanctum, Camellia sinensis, Triphala, and Shilajit in ethanol withdrawal- (EW-) induced anxiety behavior in rats. Ethanol dependence in rats was produced by substitution of drinking water with 7.5% v/v alcohol for 10 days. Then, ethanol withdrawal was induced by replacing alcohol with drinking water, 12 hours prior to experimentation. After confirming induction of withdrawal symptoms in the alcohol deprived animals, the anxiolytic activity of the test compound in graded doses (10, 20, and 40 mg/kg) was compared to the standard drug alprazolam (0.08 mg/kg) in the elevated plus maze and bright and dark arena paradigms. In our study, single and repeated dose administration of NR-ANX-C reduced EW-induced anxiety in a dose-dependent manner. Even though the anxiolytic activity was not significant at lower doses, NR-ANX-C at the highest dose tested (40 mg/kg) produced significant anxiolytic activity that was comparable to the standard drug alprazolam. Based on our findings we believe that NR-ANX-C has the potential to be used as an alternative to benzodiazepines in the treatment of EW-induced anxiety.

Evaluation of the Anxiolytic Activity of NR-ANX-C (a Polyherbal Formulation) in Ethanol Withdrawal-Induced Anxiety Behavior in Rats

PubMed Central

Mohan, L.; Rao, U. S. C.; Gopalakrishna, H. N.; Nair, V.

2011-01-01

The present study investigates the anxiolytic activity of NR-ANX-C, a standardized polyherbal formulation containing the extracts of Withania somnifera, Ocimum sanctum, Camellia sinensis, Triphala, and Shilajit in ethanol withdrawal- (EW-) induced anxiety behavior in rats. Ethanol dependence in rats was produced by substitution of drinking water with 7.5% v/v alcohol for 10 days. Then, ethanol withdrawal was induced by replacing alcohol with drinking water, 12 hours prior to experimentation. After confirming induction of withdrawal symptoms in the alcohol deprived animals, the anxiolytic activity of the test compound in graded doses (10, 20, and 40 mg/kg) was compared to the standard drug alprazolam (0.08 mg/kg) in the elevated plus maze and bright and dark arena paradigms. In our study, single and repeated dose administration of NR-ANX-C reduced EW-induced anxiety in a dose-dependent manner. Even though the anxiolytic activity was not significant at lower doses, NR-ANX-C at the highest dose tested (40 mg/kg) produced significant anxiolytic activity that was comparable to the standard drug alprazolam. Based on our findings we believe that NR-ANX-C has the potential to be used as an alternative to benzodiazepines in the treatment of EW-induced anxiety. PMID:20953426

Study on the stability control strategy of Triphala solution based on the balance of physical stability and chemical stabilities.

PubMed

Huang, Hao-Zhou; Zhao, Sheng-Yu; Ke, Xiu-Mei; Lin, Jun-Zhi; Huang, Shu-Sen; Xu, Run-Chun; Ma, Hong-Yan; Zhang, Yi; Han, Li; Zhang, Ding-Kun

2018-06-04

Triphala is a well-known prescription in Indian Ayurveda and TCM medicine for its great effect on gingivitis and hyperlipidemia. However, its solution is unstable for the containing of excessive polyphenol, leading to the production of sediment in the short term and the decrease of efficacy. Based on the analysis of sediment formation, a novel control strategy is proposed. To conduct the analysis, the sediment formation was recorded for a consecutive five days. The changes in the composition of the supernatant and the sediment were studied by the HPLC profile analysis. The main components of the sediment were identified as corilagin, ellagic acid and gallic acid, and the amount of ellagic acid sediment increased with the storage time. Then, with a series of pH status adjustments of the Triphala solution, the physical and chemical stabilities were acquired by Turbiscan and HPLC respectively. The results showed that as the pH value increased, so did the physical stability, but the particle size and TSI of the association decreased. While the fingerprint of chemical profile similarity decreased, so did the chemical stability. Combining physical and chemical stability parameters, an equilibrium point was found out. When the pH value was adjusted to 5.0, both the physical and chemical stabilities were better: the verification test showed that the sedimentation inhibition rates on the 3rd, 5th,10th and15th days were 41%, 55%, 41%, and 23%, respectively. This manuscript provided a new control strategy that will pique pharmaceutical and food development engineers' interest and trigger research ideas controlling the quality of decoction. Copyright © 2018 Elsevier B.V. All rights reserved.

Pharmaceutical and analytical evaluation of triphalaguggulkalpa tablets

PubMed Central

Savarikar, Shreeram S.; Barbhind, Maneesha M.; Halde, Umakant K.; Kulkarni, Alpana P.

2011-01-01

Aim of the Study: Development of standardized, synergistic, safe and effective traditional herbal formulations with robust scientific evidence can offer faster and more economical alternatives for the treatment of disease. The main objective was to develop a method of preparation of guggulkalpa tablets so that the tablets meet the criteria of efficacy, stability, and safety. Materials and Methods: Triphalaguggulkalpa tablet, described in sharangdharsanhita and containing guggul and triphala powder, was used as a model drug. Preliminary experiments on marketed triphalaguggulkalpa tablets exhibited delayed in vitro disintegration that indicated probable delayed in vivo disintegration. The study involved preparation of triphalaguggulkalpa tablets by Ayurvedic text methods and by wet granulation, dry granulation, and direct compression method. The tablets were evaluated for loss on drying, volatile oil content, % solubility, and steroidal content. The tablets were evaluated for performance tests like weight variation, disintegration, and hardness. Results: It was observed that triphalaguggulkalpa tablets, prepared by direct compression method, complied with the hardness and disintegration tests, whereas tablets prepared by Ayurvedic text methods failed. Conclusion: Direct compression is the best method of preparing triphalaguggulkalpa tablets. PMID:21731383

Simultaneous determination and characterization of tannins and triterpene saponins from the fruits of various species of terminalia and phyllantus emblica using UPLC-UV-MS method: application to triphala

USDA-ARS?s Scientific Manuscript database

Terminalia is a genus of large trees of the flowering plant family Combretaceae, comprising around 100 species distributed in tropical regions of the world. The fruits and bark of different species of Terminalia have been used since ancient times for the treatment of various ailments. Some of its sp...

Antifungal potential of triphala churna ingredients against Aspergillus species associated with them during storage.

PubMed

Gautam, Ajay K; Avasthi, Shubhi; Sharma, Anu; Bhadauria, Rekha

2012-03-01

The present study describes the antifungal potential of fruit and powdered ingredients of triphala churna, i.e. Emblica officinalis (Garetn.) (Amla), Terminalia bellirica (Gaertn.) Roxb. (Baheda) and Terminalia chebula (Retz.) (Harada), collected from the market of Gwalior (M.P.), India. Water extracts of all the fruits and powdered samples were tested (in vitro) for their antifungal activities by poisoned food technique against different Aspergillus species (A. flavus, A. fumigatus, A. versicolor, A. terreus and A. niger) associated with them during storage. All extracts displayed varied levels i.e. very low to very high antifungal activities on four Aspergillus species. The aqueous extracts of fresh fruits (37.96 +/- 7.59%) was observed to be most effective than dry fruits (34.95 +/- 7.59%) and powder (25.07 +/- 6.05%). Terminalia chebula (fresh and dry) extracts were found most active against the four Aspergillus species with 49.15 and 40.8% inhibition, respectively. None of the extracts were found effective against the growth of A. niger. All fruits and powdered aqueous extracts were observed to be ineffective against the A. niger. The variability in antifungal activity of aqueous extracts in the present study may be useful to study the relationship between antifungal potential of herbal drugs and prevalence of fungal contaminant during their storage.

Effect of NR-ANX-C (a polyherbal formulation) on haloperidol induced catalepsy in albino mice.

PubMed

Nair, Vinod; Arjuman, Albina; Dorababu, P; Gopalakrishna, H N; Chakradhar Rao, U; Mohan, Lalit

2007-11-01

Use of typical antipsychotics like haloperidol in treatment of schizophrenia is associated with a high incidence of extrapyramidal side effects. In rodents, administration of haloperidol leads to the development of a behavioural state called catalepsy, in which the animal is not able to correct an externally imposed posture. In the present study we evaluated the anticataleptic efficacy of NR-ANX-C, a polyherbal formulation containing bioactives of Withania somnifera, Ocimum sanctum, Camellia sinensis, triphala and shilajit in haloperidol induced catalepsy in mice. Five groups (n = 6) of male albino mice were used in the study. Catalepsy was induced by ip administration of haloperidol (1mg/kg). The degree of catalepsy (cataleptic score) was measured as the time the animal maintained an imposed posture. We compared the anticataleptic efficacy of NR-ANX-C (10, 25 and 50 mg/kg) with scopolamine (1 mg/kg). The superoxide dismutase (SOD) level in brain tissue was also estimated to correlate the levels of oxidative stress and degree of catalepsy in the animal. Significant (P<0.01) reduction in the cataleptic scores was observed in all NR-ANX-C treated groups and maximum reduction was observed in the NR-ANX-C (25 mg/kg) treated group. Significant (P<0.05) reduction in SOD activity was observed in NR-ANX-C (25 and 50 mg/kg) treated groups and maximum reduction was observed in NR-ANX-C (25mg/kg) treated group. In our study, maximum reduction in cataleptic score was observed in NR-ANX-C (25 mg/kg) treated group. The maximum reduction in SOD activity was also observed in the same group. These findings suggest a possible involvement of the antioxidant potential of NRANX- C in alleviating haloperidol induced catalepsy.

Terminalia bellirica (Gaertn.) Roxb. fruit mitigates CCl4 induced oxidative stress and hepatotoxicity in rats.

PubMed

Kuriakose, Jayesh; Lal Raisa, Helen; A, Vysakh; Eldhose, Binil; M S, Latha

2017-09-01

Terminalia bellirica (Gaertn.) Roxb. is a medicinal plant used for the treatment of various ailments in the traditional system of medicine like Ayurveda where it has been prescribed as a rejuvenator and general health tonic. The fruit of the plant is one of the components of the age old ayurvedic formulation-'Triphala'. The present study evaluates curative effect of aqueous acetone extract of Terminalia bellirica fruits (AATB) against CCl 4 induced oxidative stress and liver damage in an animal model. Two doses of the fruit extract (200mg/kg body weight and 400mg/kg body weight) were investigated for the beneficial effects. At the end of the treatment, liver function markers (ALT, AST, ALP, GGT, LDH, total bilirubin, total protein, albumin, globulin, albumin-globulin ratio) as well as hepatic oxidative stress markers (SOD, CAT, GSH) were evaluated. Treatment with AATB significantly restored the parameters towards normal level as compared to the elevated biochemical markers in the CCl 4 treated animals. Reversal to normal tissue architecture was observed in histological evaluation. The results of AATB (400mg/kg) were found comparable with that of standard drug silymarin in all the parameters. The above findings suggest the therapeutic potential of the plant in alleviating hepatic oxidative stress and tissue damage, hence the traditional use of the plant in this regard stands justified. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

An open-label, prospective clinical study to evaluate the efficacy and safety of TLPL/AY/01/2008 in the management of functional constipation

PubMed Central

Munshi, Renuka; Bhalerao, Supriya; Rathi, Pravin; Kuber, V. V.; Nipanikar, S. U.; Kadbhane, K. P.

2011-01-01

Functional constipation is one of the most common gastrointestinal symptoms across the globe. Its high prevalence rate, economic burden, and adverse implications on the quality of life make constipation a major public health issue. Though various treatment options are available for the management of constipation, evidence for their efficacy and safety are limited. An open-label, prospective, interventional, and exploratory clinical trial was carried out to evaluate the efficacy and safety of “TLPL/AY/01/2008” in 34 patients suffering from functional constipation. “TLPL/AY/01/2008” is an Ayurvedic proprietary polyherbal formulation in powder form, containing Isabgol husk, Senna extract, and Triphala extract. Administration of “TLPL/AY/01/2008” for 14 days showed a significant increase in mean weekly bowel movements from 10.19 ± 05.64 to 18.29 ± 05.72 (P<0.05). The mean average time spent on toilet for bowel evacuation reduced significantly from 11.02 ± 05.43 minutes (baseline value) to 08.70 ± 04.72 minutes on day 14 (P<0.05). Mean stool form score assessed on Bristol stool form scale was improved from 02.97 ± 00.48 (baseline value) to 04.61 ± 00.84 (P<0.05) on day 14. A significant improvement (P<0.05) was also noted in straining during defecation, sensation of incomplete evacuation, sensation of anorectal blockage, and other associated symptoms of functional constipation. The significant improvement in most of the above symptoms was endured for a post-treatment observatory period of one week. All the study patients showed an excellent tolerability to the study drug. These findings suggest that “TLPL/AY/01/2008” is an effective, safe, and non-habit-forming herbal laxative formulation for the management of constipation. Comparative clinical studies with larger sample size would be able to confirm the above findings. PMID:22022157

Quantum Jarzynski equality of measurement-based work extraction

NASA Astrophysics Data System (ADS)

Morikuni, Yohei; Tajima, Hiroyasu; Hatano, Naomichi

2017-03-01

Many studies of quantum-size heat engines assume that the dynamics of an internal system is unitary and that the extracted work is equal to the energy loss of the internal system. Both assumptions, however, should be under scrutiny. In the present paper, we analyze quantum-scale heat engines, employing the measurement-based formulation of the work extraction recently introduced by Hayashi and Tajima [M. Hayashi and H. Tajima, arXiv:1504.06150]. We first demonstrate the inappropriateness of the unitary time evolution of the internal system (namely, the first assumption above) using a simple two-level system; we show that the variance of the energy transferred to an external system diverges when the dynamics of the internal system is approximated to a unitary time evolution. Second, we derive the quantum Jarzynski equality based on the formulation of Hayashi and Tajima as a relation for the work measured by an external macroscopic apparatus. The right-hand side of the equality reduces to unity for "natural" cyclic processes but fluctuates wildly for noncyclic ones, exceeding unity often. This fluctuation should be detectable in experiments and provide evidence for the present formulation.

Quantum Jarzynski equality of measurement-based work extraction.

PubMed

Morikuni, Yohei; Tajima, Hiroyasu; Hatano, Naomichi

2017-03-01

Many studies of quantum-size heat engines assume that the dynamics of an internal system is unitary and that the extracted work is equal to the energy loss of the internal system. Both assumptions, however, should be under scrutiny. In the present paper, we analyze quantum-scale heat engines, employing the measurement-based formulation of the work extraction recently introduced by Hayashi and Tajima [M. Hayashi and H. Tajima, arXiv:1504.06150]. We first demonstrate the inappropriateness of the unitary time evolution of the internal system (namely, the first assumption above) using a simple two-level system; we show that the variance of the energy transferred to an external system diverges when the dynamics of the internal system is approximated to a unitary time evolution. Second, we derive the quantum Jarzynski equality based on the formulation of Hayashi and Tajima as a relation for the work measured by an external macroscopic apparatus. The right-hand side of the equality reduces to unity for "natural" cyclic processes but fluctuates wildly for noncyclic ones, exceeding unity often. This fluctuation should be detectable in experiments and provide evidence for the present formulation.

Two alternative ways for solving the coordination problem in multilevel optimization

NASA Technical Reports Server (NTRS)

Sobieszczanski-Sobieski, Jaroslaw

1991-01-01

Two techniques for formulating the coupling between levels in multilevel optimization by linear decomposition, proposed as improvements over the original formulation, now several years old, that relied on explicit equality constraints which were shown by application experience as occasionally causing numerical difficulties. The two new techniques represent the coupling without using explicit equality constraints, thus avoiding the above diffuculties and also reducing computational cost of the procedure. The old and new formulations are presented in detail and illustrated by an example of a structural optimization. A generic version of the improved algorithm is also developed for applications to multidisciplinary systems not limited to structures.

Reflections on Mainstreaming Gender Equality in Adult Basic Education Programmes

ERIC Educational Resources Information Center

Lind, Agneta

2006-01-01

This article is about mainstreaming gender equality in adult basic learning and education (ABLE). Gender equality is defined as equal rights of both women and men to influence, participate in and benefit from a programme. It is argued that specific gender analyses of emerging patterns of gender relations is helpful in formulating gender equality…

Evaluation of single and multilocus DNA barcodes towards species delineation in complex tree genus Terminalia

PubMed Central

Mishra, Priyanka; Kumar, Amit; Nagireddy, Akshitha; Shukla, Ashutosh K.

2017-01-01

DNA barcoding is used as a universal tool for delimiting species boundaries in taxonomically challenging groups, with different plastid and nuclear regions (rbcL, matK, ITS and psbA-trnH) being recommended as primary DNA barcodes for plants. We evaluated the feasibility of using these regions in the species-rich genus Terminalia, which exhibits various overlapping morphotypes with pantropical distribution, owing to its complex taxonomy. Terminalia bellerica and T. chebula are ingredients of the famous Ayurvedic Rasayana formulation Triphala, used for detoxification and rejuvenation. High demand for extracted phytochemicals as well as the high trade value of several species renders mandatory the need for the correct identification of traded plant material. Three different analytical methods with single and multilocus barcoding regions were tested to develop a DNA barcode reference library from 222 individuals representing 41 Terminalia species. All the single barcodes tested had a lower discriminatory power than the multilocus regions, and the combination of matK+ITS had the highest resolution rate (94.44%). The average intra-specific variations (0.0188±0.0019) were less than the distance to the nearest neighbour (0.106±0.009) with matK and ITS. Distance-based Neighbour Joining analysis outperformed the character-based Maximum Parsimony method in the identification of traded species such as T. arjuna, T. chebula and T. tomentosa, which are prone to adulteration. rbcL was shown to be a highly conservative region with only 3.45% variability between all of the sequences. The recommended barcode combination, rbcL+matK, failed to perform in the genus Terminalia. Considering the complexity of resolution observed with single regions, the present study proposes the combination of matK+ITS as the most successful barcode in Terminalia. PMID:28829803

28 CFR 42.305 - Recordkeeping and certification.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Section 42.305 Judicial Administration DEPARTMENT OF JUSTICE NONDISCRIMINATION; EQUAL EMPLOYMENT... review by responsible personnel of the cognizant State planning agency or the LEAA. Prior to the... application) certify that the _____ (criminal justice agency) has formulated an equal employment program in...

Quantifying Amphibian Pesticide Body Burdens for Active Ingredients Versus Formulations Through Dermal Exposure

EPA Science Inventory

Widespread pesticide applications throughout agricultural landscapes pose a risk to post-metamorphic amphibians leaving or moving between breeding ponds in terrestrial habitats. Recent studies indicate that the inactive ingredients in pesticide formulations may be equally or more...

Decision-Tree Formulation With Order-1 Lateral Execution

NASA Technical Reports Server (NTRS)

James, Mark

2007-01-01

A compact symbolic formulation enables mapping of an arbitrarily complex decision tree of a certain type into a highly computationally efficient multidimensional software object. The type of decision trees to which this formulation applies is that known in the art as the Boolean class of balanced decision trees. Parallel lateral slices of an object created by means of this formulation can be executed in constant time considerably less time than would otherwise be required. Decision trees of various forms are incorporated into almost all large software systems. A decision tree is a way of hierarchically solving a problem, proceeding through a set of true/false responses to a conclusion. By definition, a decision tree has a tree-like structure, wherein each internal node denotes a test on an attribute, each branch from an internal node represents an outcome of a test, and leaf nodes represent classes or class distributions that, in turn represent possible conclusions. The drawback of decision trees is that execution of them can be computationally expensive (and, hence, time-consuming) because each non-leaf node must be examined to determine whether to progress deeper into a tree structure or to examine an alternative. The present formulation was conceived as an efficient means of representing a decision tree and executing it in as little time as possible. The formulation involves the use of a set of symbolic algorithms to transform a decision tree into a multi-dimensional object, the rank of which equals the number of lateral non-leaf nodes. The tree can then be executed in constant time by means of an order-one table lookup. The sequence of operations performed by the algorithms is summarized as follows: 1. Determination of whether the tree under consideration can be encoded by means of this formulation. 2. Extraction of decision variables. 3. Symbolic optimization of the decision tree to minimize its form. 4. Expansion and transformation of all nested conjunctive-disjunctive paths to a flattened conjunctive form composed only of equality checks when possible. If each reduced conjunctive form contains only equality checks and all of these forms use the same variables, then the decision tree can be reduced to an order-one operation through a table lookup. The speedup to order one is accomplished by distributing each decision variable over a surface of a multidimensional object by mapping the equality constant to an index

Tracking Equal Opportunity in Physical Education, Recreation, Athletics.

ERIC Educational Resources Information Center

Enberg, Mary Lou

The purpose of this handbook is to assist school districts in their formulation of policies and strategies related to equal opportunity in physical education, recreation and athletics. Five aspects of policy implementation: (1) all involved, particularly personnel in the public education system, must accept both the advantages and disadvantages of…

Evaluation of SPLAT with spinosad and methyl eugenol or cue-lure for "attract-and-kill" of oriental and melon fruit flies (Diptera: Tephritidae) in Hawaii.

PubMed

Vargas, Roger I; Stark, John D; Hertlein, Mark; Neto, Agenor Mafra; Coler, Reginald; Piñero, Jaime C

2008-06-01

Specialized Pheromone and Lure Application Technology (SPLAT) methyl eugenol (ME) and cue-lure (C-L) "attract-and-kill" sprayable formulations containing spinosad were compared with other formulations under Hawaiian weather conditions against oriental fruit fly, Bactrocera dorsalis (Hendel), and melon fly, Bactrocera cucurbitae (Coquillett) (Diptera: Tephritidae), respectively. Field tests were conducted with three different dispensers (Min-U-Gel, Acti-Gel, and SPLAT) and two different insecticides (naled and spinosad). SPLAT ME with spinosad was equal in performance to the standard Min-U-Gel ME with naled formulation up to 12 wk. SPLAT C-L with spinosad was equal in performance to the standard Min-U-Gel C-L with naled formulation during weeks 7 to12, but not during weeks 1-6. In subsequent comparative trials, SPLAT ME + spinosad compared favorably with the current standard of Min-U-Gel ME + naled for up to 6 wk, and it was superior from weeks 7 to 12 in two separate tests conducted in a papaya (Carica papaya L.) orchard and a guava (Psidium guajava L.) orchard, respectively. In outdoor paired weathering tests (fresh versus weathered), C-L dispensers (SPLAT + spinosad, SPLAT + naled, and Min-U-Gel + naled) were effective up to 70 d. Weathered ME dispensers with SPLAT + spinosad compared favorably with SPLAT + naled and Min-U-Gel + naled, and they were equal to fresh dispensers for 21-28 d, depending on location. Our current studies indicate that SPLAT ME and SPLAT C-L sprayable attract-and-kill dispensers containing spinosad are a promising substitute for current liquid organophosphate insecticide formulations used for areawide suppression of B. dorsalis and B. cucurbitae in Hawaii.

Stochastic HKMDHE: A multi-objective contrast enhancement algorithm

NASA Astrophysics Data System (ADS)

Pratiher, Sawon; Mukhopadhyay, Sabyasachi; Maity, Srideep; Pradhan, Asima; Ghosh, Nirmalya; Panigrahi, Prasanta K.

2018-02-01

This contribution proposes a novel extension of the existing `Hyper Kurtosis based Modified Duo-Histogram Equalization' (HKMDHE) algorithm, for multi-objective contrast enhancement of biomedical images. A novel modified objective function has been formulated by joint optimization of the individual histogram equalization objectives. The optimal adequacy of the proposed methodology with respect to image quality metrics such as brightness preserving abilities, peak signal-to-noise ratio (PSNR), Structural Similarity Index (SSIM) and universal image quality metric has been experimentally validated. The performance analysis of the proposed Stochastic HKMDHE with existing histogram equalization methodologies like Global Histogram Equalization (GHE) and Contrast Limited Adaptive Histogram Equalization (CLAHE) has been given for comparative evaluation.

Gauge symmetries of the free bosonic string field theory

NASA Astrophysics Data System (ADS)

Neveu, A.; Schwarz, J.; West, P. C.

1985-12-01

The gauge covariant local formulations of free bosonic string theories that contained a finite number of supplementary fields are extended to include an infinite number of supplementary fields. These new formulations allow the generators of the Virasoro algebra to appear on a more equal footing. Permanent address: King's College, Physics Department, London WC2R 2LS, UK.

Efficacy of three citrus oil formulations against solenopsis invicta buren (Hymenoptera: Formicidae), the red imported fire ant1,2

Treesearch

James T. Vogt; Thormas G. Shelton; Michael E. Merchant; Scott A. Russell; Marla J. Tanley; Arthur G. Appel

2002-01-01

Experiments were conducted in Alabama, Oklahoma, and Texas to assess efficacy of raw citrus peel extract (orange oil) and a commercial citrus oil formulation for control of Solenopsis invicta Buren, the red imported fire ant. A recipe containing orange oil (equal parts orange oil, cattlemen's molasses, and compost tea at 47 mL L1 water),...

Comment on ``On the Crooks fluctuation theorem and the Jarzynski equality'' [J. Chem. Phys. 129, 091101 (2008)

NASA Astrophysics Data System (ADS)

Adib, Artur B.

2009-06-01

It has recently been argued that a self-consistency condition involving the Jarzynski equality (JE) and the Crooks fluctuation theorem (CFT) is violated for a simple Brownian process [L. Y. Chen, J. Chem. Phys.129, 091101 (2008)]. This note adopts the definitions in the original formulation of the JE and CFT and demonstrates the contrary.

On the linear programming bound for linear Lee codes.

PubMed

Astola, Helena; Tabus, Ioan

2016-01-01

Based on an invariance-type property of the Lee-compositions of a linear Lee code, additional equality constraints can be introduced to the linear programming problem of linear Lee codes. In this paper, we formulate this property in terms of an action of the multiplicative group of the field [Formula: see text] on the set of Lee-compositions. We show some useful properties of certain sums of Lee-numbers, which are the eigenvalues of the Lee association scheme, appearing in the linear programming problem of linear Lee codes. Using the additional equality constraints, we formulate the linear programming problem of linear Lee codes in a very compact form, leading to a fast execution, which allows to efficiently compute the bounds for large parameter values of the linear codes.

Slow Crack Growth of Brittle Materials With Exponential Crack-Velocity Formulation. Part 2; Constant Stress Rate Experiments

NASA Technical Reports Server (NTRS)

Choi, Sung R.; Nemeth, Noel N.; Gyekenyesi, John P.

2002-01-01

The previously determined life prediction analysis based on an exponential crack-velocity formulation was examined using a variety of experimental data on glass and advanced structural ceramics in constant stress rate and preload testing at ambient and elevated temperatures. The data fit to the relation of strength versus the log of the stress rate was very reasonable for most of the materials. Also, the preloading technique was determined equally applicable to the case of slow-crack-growth (SCG) parameter n greater than 30 for both the power-law and exponential formulations. The major limitation in the exponential crack-velocity formulation, however, was that the inert strength of a material must be known a priori to evaluate the important SCG parameter n, a significant drawback as compared with the conventional power-law crack-velocity formulation.

Systems and methods for energy cost optimization in a building system

DOEpatents

Turney, Robert D.; Wenzel, Michael J.

2016-09-06

Methods and systems to minimize energy cost in response to time-varying energy prices are presented for a variety of different pricing scenarios. A cascaded model predictive control system is disclosed comprising an inner controller and an outer controller. The inner controller controls power use using a derivative of a temperature setpoint and the outer controller controls temperature via a power setpoint or power deferral. An optimization procedure is used to minimize a cost function within a time horizon subject to temperature constraints, equality constraints, and demand charge constraints. Equality constraints are formulated using system model information and system state information whereas demand charge constraints are formulated using system state information and pricing information. A masking procedure is used to invalidate demand charge constraints for inactive pricing periods including peak, partial-peak, off-peak, critical-peak, and real-time.

Analytical formulation of orbiter-payload models coupled by trunnion joints with Coulomb friction

NASA Technical Reports Server (NTRS)

Liu, Frank C.

1987-01-01

An orbiter and its payload substructure are linked together by five trunnion joints which have thirty degrees-of-freedom. Geometric compatibility conditions require fourteen of the interface physical coordinates of the orbiter and payload to be equal to each other and the remaining sixteen are free to have relative motions under Coulomb friction. The component modes synthesis method using fourteen inertia relief attachment modes for the formulation of the coupled system is presented. The exact nonlinear friction function is derived based on the characteristics of the joints. Formulation is applicable to an orbiter that carries any number of payload substructures.

Analytical formulation of orbiter-payload coupled by trunnion joints with Coulomb friction

NASA Technical Reports Server (NTRS)

Liu, Frank C.

1986-01-01

An orbiter and its payload substructure are linked together by five trunnion joints which have thirty degrees-of-freedom. Geometric compatibility conditions require fourteen of the interface physical coordinates of the orbiter and payload to be equal to each other and the remaining sixteen are free to have relative motions under Coulomb friction. The component modes synthesis method using fourteen inertia relief attachment modes for the formulation of the coupled system is presented. The exact nonlinear friction function is derived based on the characteristics of the joints. Formulation is applicable to an orbiter that carries any number of payload substructures.

A stochastic electricity market clearing formulation with consistent pricing properties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zavala, Victor M.; Kim, Kibaek; Anitescu, Mihai

We argue that deterministic market clearing formulations introduce arbitrary distortions between day-ahead and expected real-time prices that bias economic incentives. We extend and analyze a previously proposed stochastic clearing formulation in which the social surplus function induces penalties between day-ahead and real-time quantities. We prove that the formulation yields price bounded price distortions, and we show that adding a similar penalty term to transmission flows and phase angles ensures boundedness throughout the network. We prove that when the price distortions are zero, day-ahead quantities equal a quantile of their real-time counterparts. The undesired effects of price distortions suggest that stochasticmore » settings provide significant benefits over deterministic ones that go beyond social surplus improvements. Finally, we propose additional metrics to evaluate these benefits.« less

A stochastic electricity market clearing formulation with consistent pricing properties

DOE PAGES

Zavala, Victor M.; Kim, Kibaek; Anitescu, Mihai; ...

2017-03-16

We argue that deterministic market clearing formulations introduce arbitrary distortions between day-ahead and expected real-time prices that bias economic incentives. We extend and analyze a previously proposed stochastic clearing formulation in which the social surplus function induces penalties between day-ahead and real-time quantities. We prove that the formulation yields price bounded price distortions, and we show that adding a similar penalty term to transmission flows and phase angles ensures boundedness throughout the network. We prove that when the price distortions are zero, day-ahead quantities equal a quantile of their real-time counterparts. The undesired effects of price distortions suggest that stochasticmore » settings provide significant benefits over deterministic ones that go beyond social surplus improvements. Finally, we propose additional metrics to evaluate these benefits.« less

Design and physicochemical stability studies of paediatric oral formulations of sildenafil.

PubMed

Provenza, N; Calpena, A C; Mallandrich, M; Halbaut, L; Clares, B

2014-01-02

Personalized medicine is a challenging research area in paediatric treatments. Elaborating new paediatric formulations when no commercial forms are available is a common practice in pharmacy laboratories; among these, oral liquid formulations are the most common. But due to the lack of specialized equipment, frequently studies to assure the efficiency and safety of the final medicine cannot be carried out. Thus the purpose of this work was the development, characterization and stability evaluation of two oral formulations of sildenafil for the treatment of neonatal persistent pulmonary hypertension. After the establishment of a standard operating procedure (SOP) and elaboration, the physicochemical stability parameters appearance, pH, particle size, rheological behaviour and drug content of formulations were evaluated at three different temperatures for 90 days. Equally, prediction of long term stability, as well as, microbiological stability was performed. Formulations resulted in a suspension and a solution slightly coloured exhibiting fruity odour. Formulation I (suspension) exhibited the best physicochemical properties including Newtonian behaviour and uniformity of API content above 90% to assure an exact dosification process. Copyright © 2013 Elsevier B.V. All rights reserved.

Superfield quantization

NASA Astrophysics Data System (ADS)

Batalin, I. A.; Bering, K.; Damgaard, P. H.

1998-03-01

We present a superfield formulation of the quantization program for theories with first-class constraints. An exact operator formulation is given, and we show how to set up a phase-space path integral entirely in terms of superfields. BRST transformations and canonical transformations enter on equal footing, and they allow us to establish a superspace analog of the BFV theorem. We also present a formal derivation of the Lagrangian superfield analogue of the field-antifield formalism by an integration over half of the phase-space variables.

Examine How Botswana Defense Force in Concurrence with Other Instruments of National Power, Promote Botwana’s National Interests in a Multifarious International Security Environment Regionally

DTIC Science & Technology

2016-06-10

national objectives that will be pursued through the implementation of the NSS. It is now prudent to focus arguments on the NDS. Formulating the...interests through foreign policy development ) in the region and abroad. 83 The fundamental purpose of Botswana’s NSS is principally based on a...notion. This will also be shown in subsequent arguments when discussing the Foreign Policy; Formulation and Implementation Model . But it is equally

A p-version finite element method for steady incompressible fluid flow and convective heat transfer

NASA Technical Reports Server (NTRS)

Winterscheidt, Daniel L.

1993-01-01

A new p-version finite element formulation for steady, incompressible fluid flow and convective heat transfer problems is presented. The steady-state residual equations are obtained by considering a limiting case of the least-squares formulation for the transient problem. The method circumvents the Babuska-Brezzi condition, permitting the use of equal-order interpolation for velocity and pressure, without requiring the use of arbitrary parameters. Numerical results are presented to demonstrate the accuracy and generality of the method.

Field comparison of thermal and non-thermal ultra-low-volume applications using water and diesel as solvents for managing dengue vector, Aedes aegypti.

PubMed

Harburguer, Laura; Lucia, Alejandro; Licastro, Susana; Zerba, Eduardo; Masuh, Héctor

2012-10-01

To compare the effectiveness on Aedes aegypti (Linneo) (Diptera: Culicidae) of a larvicide-adulticide ULV formulation applied by a thermal or a cold fogger using different solvents. We applied, in field conditions, a ULV formulation containing pyriproxyfen and permethrin, using a thermal and a cold fogger and water or diesel as solvent. We determined the effectiveness of these applications on Ae. aegypti adults and larvae by different bioassays and measuring Breteau, house and adult indices. When water was used as solvent, the treatments applied with the cold or the thermal foggers were equally effective on adult mortality (close to 90%) and adult emergence inhibition (% EI) (close to 70%). When the thermal fogger was used with water as solvent, the adult mortality outside the houses (85%) was higher, but not significantly different, than with diesel (65%). The contrary happens inside (22%vs. 58%), while there were no differences in %EI. Adult and larval indices behaved similarly in all areas, with a slight tendency for the treatments applied using water as solvent to be more effective. Water-based formulations are equally or more effective than the one applied with diesel as solvent. The use of water as solvent will not only improve the effectiveness of this formulation but also reduce the environmental impact and costs of spraying compared to the use of diesel. © 2012 Blackwell Publishing Ltd.

Formulation of blade-flutter spectral analyses in stationary reference frame

NASA Technical Reports Server (NTRS)

Kurkov, A. P.

1984-01-01

Analytic representations are developed for the discrete blade deflection and the continuous tip static pressure fields in a stationary reference frame. Considered are the sampling rates equal to the rotational frequency, equal to blade passing frequency, and for the pressure, equal to a multiple of the blade passing frequency. For the last two rates the expressions for determining the nodal diameters from the spectra are included. A procedure is presented for transforming the complete unsteady pressure field into a rotating frame of reference. The determination of the true flutter frequency by using two sensors is described. To illustrate their use, the developed procedures are used to interpret selected experimental results.

7 CFR 900.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... and Procedure Governing Proceedings To Formulate Marketing Agreements and Marketing Orders § 900.2 Definitions. As used in this subpart, the terms as defined in the act shall apply with equal force and effect...

Green and ecofriendly synthesis of silver nanoparticles: Characterization, biocompatibility studies and gel formulation for treatment of infections in burns.

PubMed

Jadhav, Kiran; Dhamecha, Dinesh; Bhattacharya, Debdutta; Patil, Mrityunjaya

2016-02-01

The current study summarizes a unique green process for the synthesis of silver nanoparticles (AgNPs) by simple treatment of silver nitrate with aqueous extract of Ammania baccifera. Phytosynthesized AgNPs were characterized by various advanced analytical methods and studied for its use against infections associated with burns. Formation of AgNPs was observed by visual color change from colorless to dark brown and confirmed by UV-visible characteristic peak at 436 nm. Zeta potential, particle size and polydispersity index of nano-silver were found to be -33.1 ± 1.12, 112.6 ± 6.8 nm and 0.3 ± 0.06 respectively. XRD spectra revealed crystalline nature of AgNPs whereas TEM confirmed the presence of mixed morphology of AgNPs. The overall approach designated in the present research investigation for the synthesis of AgNPs is based on all 12 principles of green chemistry, in which no man-made chemical other than the silver nitrate was used. Synthesized nano-silver colloidal dispersion was initially tested for minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) against a panel of organisms involved in infections associated with burns (Pseudomonas aeruginosa (PA), Staphylococcus aureus (SA) and methicillin resistant S. aureus (MRSA)). MIC and MBC were found to be in range of 0.992 to 7.93 and 7.93 to 31.75 μg/mL respectively. MBC was used for formulation of AgNP gel and tested for its efficacy using agar well diffusion method against PA, SA and MRSA. Comparative bactericidal efficacy of formulated gel (0.03% w/w) and marked formulation Silverex™ ionic (silver nitrate gel 0.2% w/w) showed equal zone of inhibition against all pathogenic bacteria. Formulated AgNP gel consisting of 95% lesser concentration of silver compared to marketed formulation was found to be equally effective against all organisms. Hence, the formulated AgNP gel could serve as a better alternative with least toxicity towards the treatment presently available for infections in burns. Copyright © 2016 Elsevier B.V. All rights reserved.

Temozolomide stability in extemporaneously compounded oral suspensions.

PubMed

Trissel, Lawrence A; Zhang, Yanping; Koontz, Susannah E

2006-01-01

Temozolomide, commercially available in capsules, is an oral alkylating agent used to treat brain tumors. The purpose of this study was to determine the pharmaceutical acceptability and chemical stability of temozolomide in two extemporaneously compounded suspension formulations prepared from the capsules. The temozolomide oral suspensions were prepared from 100-mg commercial capsules yielding a nominal temozolomide concentration of 10 mg/mL. The suspension vehicles selected for testing were an equal parts mixture of Ora-Plus and Ora-Sweet and an equal parts mixture of Ora-Plus and Ora-Sweet SF. The suspensions were packaged in amber plastic screw-cap prescription bottles, which were stored at 23 deg C for 21 days or 4 deg C for 60 days. Stability-indicating high-performance liquid chromatographic analysis revealed that the temozolomide concentration in both suspension vehicle combinations exhibited little or no loss for 60 days at 4 deg C. At 23 deg C, temozolomide losses were somewhat greater. In the Ora-Sweet formulation, the loss was 6% at 7 days; in the Ora-Sweet SF formulation, losses were about 8% at 14 days and 10% to 11% at 21 days. Temozolomide extemporaneously prepared as oral suspensions from capsules in equal parts mixtures of Ora-Plus suspension vehicle with Ora-Sweet and with ora-Sweet SF syrups with added povidine k-30 and acidified with citric acid were pharmaceutically acceptable and chemically stable for at least 60 days at 4 deg C. Refrigerated storage is recommended. The suspensions should not be stored at room temperature longer than 1 week if Ora-Sweet is used or longer than 2 weeks if Ora-Sweet SF is used.

Preliminary Structural Design Using Topology Optimization with a Comparison of Results from Gradient and Genetic Algorithm Methods

NASA Technical Reports Server (NTRS)

Burt, Adam O.; Tinker, Michael L.

2014-01-01

In this paper, genetic algorithm based and gradient-based topology optimization is presented in application to a real hardware design problem. Preliminary design of a planetary lander mockup structure is accomplished using these methods that prove to provide major weight savings by addressing the structural efficiency during the design cycle. This paper presents two alternative formulations of the topology optimization problem. The first is the widely-used gradient-based implementation using commercially available algorithms. The second is formulated using genetic algorithms and internally developed capabilities. These two approaches are applied to a practical design problem for hardware that has been built, tested and proven to be functional. Both formulations converged on similar solutions and therefore were proven to be equally valid implementations of the process. This paper discusses both of these formulations at a high level.

Comparative applications of azadirachtin- and Brevibacillus laterosporus-based formulations for house fly management experiments in dairy farms.

PubMed

Ruiu, L; Satta, A; Floris, I

2011-03-01

The potential of two bioinsecticidal formulations containing Brevibacillus laterosporus spores and azadirachtin, respectively, was assayed in laboratory and in comparative field treatments for the management of immature house flies on dairy farms. As already known for B. laterosporus, preliminary laboratory experiments with azadirachtin evidenced a concentration-dependent effect. Azadirachtin median lethal concentration (LC50) value determined for second instar larvae was 24.5 microg/g diet. Applications in dairy farms were performed at dosages and concentrations predetermined in laboratory experiments, to employ the two formulations at an equal insecticidal potential. Repeated applications on the cow pen caused a significant fly development depression in areas treated with azadirachtin (63%) and B. laterosporus (46%), compared with the control. Formulations were applied at a dosage of 3 liters/m2, and concentrations of 2 x 10(8) B. laterosporus spores/ml and 25 microg azadirachtin/ml, respectively.

Norfloxacin and metronidazole topical formulations for effective treatment of bacterial infections and burn wounds

PubMed Central

Dua, Kamal; Malipeddi, Venkata Ramana; Madan, Jyotsna; Gupta, Gaurav; Chakravarthi, Srikumar; Awasthi, Rajendra; Kikuchi, Irene Satiko; De Jesus Andreoli Pinto, Terezinha

2016-01-01

Introduction Our various previous findings have shown the suitability of norfloxacin in the treatment of bacterial infections and burn wounds in alone as well as in combination with Curcuma longa in various topical (ointments, gels, and creams) and transdermal drug delivery systems. Aims and methods Keeping these facts in consideration, we have made an another attempt to prepare semisolid formulations containing 1% w/w of norfloxacin and metronidazole with different bases like Carbopol, polyethylene glycol, and hydroxypropylmethyl cellulose for effective treatment of bacterial infections and burn wounds. The prepared formulations were evaluated for physicochemical parameters, in vitro drug release, antimicrobial activity, and burn wound healing properties. Results The prepared formulations were compared with Silver Sulfadiazine cream 1%, USP. Antimicrobial activity of norfloxacin semisolid formulations was found to be equally effective against both aerobic and anaerobic bacteria in comparison to a marketed formulation of Silver Sulfadiazine 1% cream, USP. Based on the burn wound healing property, the prepared norfloxacin semisolid formulation was found to be in good agreement with marketed Silver Sulfadiazine 1% cream, USP. Conclusions These findings suggest formulations containing norfloxacin and metronidazole may also prove as an effective alternative for existing remedies in the treatment of bacterial infections and burn wounds. PMID:28386462

Utterance selection model of language change

NASA Astrophysics Data System (ADS)

Baxter, G. J.; Blythe, R. A.; Croft, W.; McKane, A. J.

2006-04-01

We present a mathematical formulation of a theory of language change. The theory is evolutionary in nature and has close analogies with theories of population genetics. The mathematical structure we construct similarly has correspondences with the Fisher-Wright model of population genetics, but there are significant differences. The continuous time formulation of the model is expressed in terms of a Fokker-Planck equation. This equation is exactly soluble in the case of a single speaker and can be investigated analytically in the case of multiple speakers who communicate equally with all other speakers and give their utterances equal weight. Whilst the stationary properties of this system have much in common with the single-speaker case, time-dependent properties are richer. In the particular case where linguistic forms can become extinct, we find that the presence of many speakers causes a two-stage relaxation, the first being a common marginal distribution that persists for a long time as a consequence of ultimate extinction being due to rare fluctuations.

Efficacy of Imiquimod-Based Transcutaneous Immunization Using a Nano-Dispersed Emulsion Gel Formulation

PubMed Central

Tenzer, Stefan; Schild, Hansjörg; Stevanovic, Stefan; Langguth, Peter; Radsak, Markus P.

2014-01-01

Background Transcutaneous immunization (TCI) approaches utilize skin associated lymphatic tissues to elicit specific immune responses. In this context, the imidazoquinoline derivative imiquimod formulated in Aldara applied onto intact skin together with a cytotoxic T lymphocyte (CTL) epitope induces potent CTL responses. However, the feasibility and efficacy of the commercial imiquimod formulation Aldara is limited by its physicochemical properties as well as its immunogenicity. Methodology/Principal Findings To overcome these obstacles, we developed an imiquimod-containing emulsion gel (IMI-Gel) and characterized it in comparison to Aldara for rheological properties and in vitro mouse skin permeation in a Franz diffusion cell system. Imiquimod was readily released from Aldara, while IMI-Gel showed markedly decreased drug release. Nevertheless, comparing vaccination potency of Aldara or IMI-Gel-based TCI in C57BL/6 mice against the model cytotoxic T-lymphocyte epitope SIINFEKL, we found that IMI-Gel was equally effective in terms of the frequency of peptide-specific T-cells and in vivo cytolytic activity. Importantly, transcutaneous delivery of IMI-Gel for vaccination was clearly superior to the subcutaneous or oral route of administration. Finally, IMI-Gel based TCI was at least equally effective compared to Aldara-based TCI in rejection of established SIINFEKL-expressing E.G7 tumors in a therapeutic setup indicated by enhanced tumor rejection and survival. Conclusion/Significance In summary, we developed a novel imiquimod formulation with feasible pharmaceutical properties and immunological efficacy that fosters the rational design of a next generation transcutaneous vaccination platform suitable for the treatment of cancer or persistent virus infections. PMID:25025233

Bracket formulations and energy- and helicity-preserving numerical methods for incompressible two-phase flows

NASA Astrophysics Data System (ADS)

Suzuki, Yukihito

2018-03-01

A diffuse interface model for three-dimensional viscous incompressible two-phase flows is formulated within a bracket formalism using a skew-symmetric Poisson bracket together with a symmetric negative semi-definite dissipative bracket. The budgets of kinetic energy, helicity, and enstrophy derived from the bracket formulations are properly inherited by the finite difference equations obtained by invoking the discrete variational derivative method combined with the mimetic finite difference method. The Cahn-Hilliard and Allen-Cahn equations are employed as diffuse interface models, in which the equalities of densities and viscosities of two different phases are assumed. Numerical experiments on the motion of periodic arrays of tubes and those of droplets have been conducted to examine the properties and usefulness of the proposed method.

Power Law Versus Exponential Form of Slow Crack Growth of Advanced Structural Ceramics: Dynamic Fatigue

NASA Technical Reports Server (NTRS)

Choi, Sung R.; Gyekenyesi, John P.

2002-01-01

The life prediction analysis based on an exponential crack velocity formulation was examined using a variety of experimental data on glass and advanced structural ceramics in constant stress-rate ("dynamic fatigue") and preload testing at ambient and elevated temperatures. The data fit to the strength versus In (stress rate) relation was found to be very reasonable for most of the materials. It was also found that preloading technique was equally applicable for the case of slow crack growth (SCG) parameter n > 30. The major limitation in the exponential crack velocity formulation, however, was that an inert strength of a material must be known priori to evaluate the important SCG parameter n, a significant drawback as compared to the conventional power-law crack velocity formulation.

General Definitions of Work and Heat in Thermodynamic Processes.

ERIC Educational Resources Information Center

Gislason, Eric A.; Craig, Norman C.

1987-01-01

Argues that previous definitions of work and heat are inappropriate. Presents new definitions that are formulated using experimental quantities, claiming that they apply equally well to reversible and irreversible processes. Indicates some of the problems with earlier definitions and applies the new definitions to the First Law of thermodynamics.…

The Students Role in French Academic Deliberative Democracy

ERIC Educational Resources Information Center

Tavernier, Franois

2004-01-01

Since 1968, according to the French higher education law, elected students must participate in the different academic boards in every university. As trustees, they must formulate opinions about the institutional policy. Moreover, they must deliberate on equal terms with teachers. According to a common discourse, this democratic activity is still…

Elasticity of smectic liquid crystals with in-plane orientational order and dispiration asymmetry

NASA Astrophysics Data System (ADS)

Alageshan, Jaya Kumar; Chakrabarti, Buddhapriya; Hatwalne, Yashodhan

2017-02-01

The Nelson-Peliti formulation of the elasticity theory of isolated fluid membranes with orientational order emphasizes the interplay between geometry, topology, and thermal fluctuations. Fluid layers of lamellar liquid crystals such as smectic-C , hexatic smectics, and smectic-C* are endowed with in-plane orientational order. We extend the Nelson-Peliti formulation so as to bring these smectics within its ambit. Using the elasticity theory of smectics-C*, we show that positive and negative dispirations (topological defects in Smectic-C* liquid crystals) with strengths of equal magnitude have disparate energies—a result that is amenable to experimental tests.

New lipid formulation of octenidine dihydrochloride.

PubMed

Szostak, Kamila; Czogalla, Aleksander; Przybyło, Magdalena; Langner, Marek

2018-06-01

Octenidine dihydrochloride is an effective antiseptic compound which mode of action is based on destabilization plasma membrane of microorganisms. This ensures that microorganisms cannot develop the drug resistance in a straightforward way, as the entire cellular structure, rather than specific molecular target is affected. Since the octenidine is a hydrophobic compound, it requires organic solvent such as phenoxyethanol in order to be effectively administered. However, the presence of phenoxyethanol has strong irritating effect, particularly when applied on open wounds and mucous membranes. Phospholipids are known as neutral excipients free of side effects and in their aggregated form may serve as solvent for octenidine. In this article, we propose a new antiseptic formulation composed of equimolar ratio of lipids and octenidine. The resulting particles are ∼4 nm in diameter showing that their topology is different from that known for liposomes. The new formulation has proven to be equally effective as octenidine dihydrochloride formulation marketed under the name of Octenisept®. The main advantage of the new formulation is that it does not contain phenoxyethanol, which opens new possibilities for broader application spectrum of octenidine, including treatments of mucous membranes and open wounds.

Development of polyisocyanurate pour foam formulation for space shuttle external tank thermal protection system

NASA Technical Reports Server (NTRS)

Harvey, James A.; Butler, John M.; Chartoff, Richard P.

1988-01-01

Four commercially available polyisocyanurate polyurethane spray-foam insulation formulations are used to coat the external tank of the space shuttle. There are several problems associated with these formulations. For example, some do not perform well as pourable closeout/repair systems. Some do not perform well at cryogenic temperatures (poor adhesion to aluminum at liquid nitrogen temperatures). Their thermal stability at elevated temperatures is not adequate. A major defect in all the systems is the lack of detailed chemical information. The formulations are simply supplied to NASA and Martin Marietta, the primary contractor, as components; Part A (isocyanate) and Part B (poly(s) and additives). Because of the lack of chemical information the performance behavior data for the current system, NASA sought the development of a non-proprietary room temperature curable foam insulation. Requirements for the developed system were that it should exhibit equal or better thermal stability both at elevated and cryogenic temperatures with better adhesion to aluminum as compared to the current system. Several formulations were developed that met these requirements, i.e., thermal stability, good pourability, and good bonding to aluminum.

Single-dose oral pharmacokinetics of three formulations of thalidomide in healthy male volunteers.

PubMed

Teo, S K; Colburn, W A; Thomas, S D

1999-11-01

Thalidomide was recently approved in the United States for the treatment of erythema nodosum leprosum, a complication of leprosy. The present study determined the bioequivalence and pharmacokinetics of Celgene's commercial and clinical trial thalidomide formulations and the Brazilian Tortuga formulation in an open-label, single-dose, three-way crossover design. Seventeen healthy subjects were given 200 mg of thalidomide on three occasions, and blood samples were collected over 48 hours. Pharmacokinetic parameters were determined using compartmental methods for the two Celgene formulations and using noncompartmental methods for all three formulations. All subjects reported adverse events, none of which was serious or unexpected. Celgene formulations were bioequivalent when comparing Cmax, tmax, and AUC. There was significant variability in plasma levels from the Tortuga formulation, giving a mean profile that was distinctly different from the two Celgene formulations with a lower Cmax value and a longer terminal phase. The lower Cmax was probably due to slower absorption. The terminal rate constant for the Tortuga formulation was significantly less, giving rise to a terminal half-life of 15 hours compared to about 5 to 6 hours for the Celgene formulations. Confidence intervals for Cmax between the Tortuga and the Celgene formulations were outside the 80% to 125% range, indicating a lack of bioequivalence. Extent of absorption, as measured by AUC0-infinity, was approximately equal for all three formulations. Terminal half-life for Tortuga was two to three times longer compared to the Celgene formulations and is clear evidence for absorption rate limitations. The two Celgene formulations showed similar pharmacokinetic parameters with profiles that were best described by a one-compartment model with first-order absorption and elimination. The authors conclude that Celgene's clinical trial and commercial thalidomide formulations are similar to each other and distinctly different from the Tortuga formulation and that all three formulations exhibited absorption rate-limited elimination.

Analyzing the Effect of Multi-fuel and Practical Constraints on Realistic Economic Load Dispatch using Novel Two-stage PSO

NASA Astrophysics Data System (ADS)

Chintalapudi, V. S.; Sirigiri, Sivanagaraju

2017-04-01

In power system restructuring, pricing the electrical power plays a vital role in cost allocation between suppliers and consumers. In optimal power dispatch problem, not only the cost of active power generation but also the costs of reactive power generated by the generators should be considered to increase the effectiveness of the problem. As the characteristics of reactive power cost curve are similar to that of active power cost curve, a nonconvex reactive power cost function is formulated. In this paper, a more realistic multi-fuel total cost objective is formulated by considering active and reactive power costs of generators. The formulated cost function is optimized by satisfying equality, in-equality and practical constraints using the proposed uniform distributed two-stage particle swarm optimization. The proposed algorithm is a combination of uniform distribution of control variables (to start the iterative process with good initial value) and two-stage initialization processes (to obtain best final value in less number of iterations) can enhance the effectiveness of convergence characteristics. Obtained results for the considered standard test functions and electrical systems indicate the effectiveness of the proposed algorithm and can obtain efficient solution when compared to existing methods. Hence, the proposed method is a promising method and can be easily applied to optimize the power system objectives.

Numerical simulation of a sphere moving down an incline with identical spheres placed equally apart

USGS Publications Warehouse

Ling, Chi-Hai; Jan, Chyan-Deng; Chen, Cheng-lung; Shen, Hsieh Wen

1992-01-01

This paper describes a numerical study of an elastic sphere moving down an incline with a string of identical spheres placed equally apart. Two momentum equations and a moment equation formulated for the moving sphere are solved numerically for the instantaneous velocity of the moving sphere on an incline with different angles of inclination. Input parameters for numerical simulation include the properties of the sphere (the radius, density, Poison's ratio, and Young's Modulus of elasticity), the coefficient of friction between the spheres, and a damping coefficient of the spheres during collision.

Analysis of health sector gender equality and social inclusion strategy 2009 of Nepal.

PubMed

Mahara, G B; Dhital, S R

2014-01-01

The policy on gender equality and social inclusion (GESI) in health sector of Nepal is formulated in 2009 targeting toward poor, vulnerable, marginalized social and ethnic groups. Gender inequality and social discrimination are a social problem that affect on individual health finally. The main objective of this paper is to critically analysis and evaluates the Government's strategy on health sector gender equality and social inclusion in Nepal. We collected published and unpublished information assessing the public health, policy analysis and research needs from different sources. A different policy approaches for the analysis and evaluation of GESI strategies is applied in this paper. Universal education, community participation, individual, group and mass communication approaches, and social capital are the key aspects of effective implementation of policy at target levels.

Recent advances in 193-nm single-layer photoresists based on alternating copolymers of cycloolefins

NASA Astrophysics Data System (ADS)

Houlihan, Francis M.; Wallow, Thomas I.; Timko, Allen G.; Neria, E.; Hutton, Richard S.; Cirelli, Raymond A.; Nalamasu, Omkaram; Reichmanis, Elsa

1997-07-01

We report on our recent investigations on the formulation and processing of 193 nm single layer photoresists based on alternating copolymers of cycloolefins with maleic anhydride. Resists formulated with cycloolefin copolymers are compatible with 0.262 N tetramethylammonium developers, have excellent adhesion, sensitivity, etch resistance and thermal flow properties. The effect of polymer structure and composition, dissolution inhibitor structure and loading as well as the effect of the photoacid generator on the resist dissolution properties was investigated. Based on the results high contrast formulations were evaluated on a GCA XLS (NA equals 0.53, 4X reduction optics) deep-UV stepper to exhibit 0.27 micrometer L/S pair resolution with excellent photosensitivity. Based on the dissolution properties and a spectroscopic examination of the resist, we have designed materials that show less than 0.17 micrometer L/S pair resolution with 193 nm exposures. In this paper, the formulation methodology is detailed and the most recent results upon both with 248 and 193 nm irradiation are described.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barnhill, William C.; Gao, Hong; Kheireddin, Bassem

We have previously reported an oil-miscible phosphonium-organophosphate ionic liquid (IL) with an effective anti-wear (AW) functionality when added to a base oil by itself or combined with a conventional zinc dialkyldithiophosphate (ZDDP) for a synergistic effect. In this research, we investigated whether this synergy manifests in formulated engine oils. An experimental SAE 0W-16 engine oil was generated containing a combination of IL and ZDDP with equal phosphorus contribution. The prototype engine oil was first evaluated using tribological bench tests: AW performance in boundary lubrication (BL) and friction behavior (Stribeck curves) in elastohydrodynamic, mixed, and BL. In addition, the forthcoming standardmore » Sequence VIE engine dynamometer test was then conducted to demonstrate improved fuel economy. Results were benchmarked against those of another experimental engine oil with almost the same formulation except using ZDDP only without the IL (similar total phosphorus content). The IL-ZDDP formulation consistently outperforms the ZDDP-only formulation in friction reduction and wear protection, and results from the bench and engine tests are well correlated.« less

Formulation of benzoporphyrin derivatives in Pluronics.

PubMed

Chowdhary, Rubinah K; Chansarkar, Namrata; Sharif, Isha; Hioka, Noboru; Dolphin, David

2003-03-01

This study investigates the potential of Pluronics for the formulation of tetrapyrrole-based photosensitizers, with a particular focus on B-ring benzoporphyrin derivatives. The B-ring derivatives have a high tendency to aggregate in aqueous solutions, and this poses a significant formulation problem. Pluronics are ABA-type triblock copolymers composed of a central hydrophobic polypropylene oxide section with two hydrophilic polyethylene oxide sections of equal length at either end. Out of a range of different commercially available block copolymers studied, it was found that the longer the hydrophobic block, the better the stabilization of tetrapyrrolic drugs in monomeric form in aqueous suspensions. Of these the best performance was observed in the micelle-forming Pluronic P123. Micelle size determination by laser light scattering confirmed that particle size in stable Pluronic formulations was around 20 nm. Pluronics such as L122 formed emulsions spontaneously without the need for emulsion stabilizers; emulsions were highly stable at ambient temperatures over several days and also highly effective as potential drug delivery agents.

Formulation of multiple choice questions as a revision exercise at the end of a teaching module in biochemistry.

PubMed

Bobby, Zachariah; Radhika, M R; Nandeesha, H; Balasubramanian, A; Prerna, Singh; Archana, Nimesh; Thippeswamy, D N

2012-01-01

The graduate medical students often get less opportunity for clarifying their doubts and to reinforce their concepts after lecture classes. Assessment of the effect of MCQ preparation by graduate medical students as a revision exercise on the topic "Mineral metabolism." At the end of regular teaching module on the topic "Mineral metabolism," graduate medical students were asked to prepare the stems of 15 MCQs based on the four discriminators given for each. They were told that one of the discriminators could be the answer for the MCQ and the remaining three could be the distracters. They were further guided in their task by providing few key word(s) in the stem of the expected MCQ. In the first phase of the exercise, the students attempted the MCQ preparation individually without peer consultation. In the second phase, the students participated in small group discussion to formulate the best MCQs of the group. The effects on low, medium, and high achievers were evaluated by pre and post-tests with the same set of MCQs. Both the individual endeavor in Phase 1 and small group discussion in Phase 2 for the formulation of MCQs significantly contributed to the gain from the exercise. The gains from the individual task and from small group discussion were equal among the different categories of students. Both phases of the exercise were equally beneficial for the low, medium, and high achievers. The high and medium achievers retained the gain from the exercise even after 1 week of the exercise whereas the low achievers could not retain the gain completely. Formulation of MCQs is an effective and useful unconventional revision exercise in Biochemistry for graduate medical students. Copyright © 2012 Wiley Periodicals, Inc.

Gauge symmetries of the free supersymmetric string field theories

NASA Astrophysics Data System (ADS)

Neveu, A.; West, P. C.

1985-12-01

The gauge covariant local formulations of the free supersymmetric strings that contained a finite number of supplementary fields are extended so as to place all the generators of the Ramond-Neveu-Schwarz algebra on a more equal footing. Permanent address: King's College, Mathematics Department, London WC2R 2LS, UK.

Field trials with tank mixtures of Bacillus thuringiensis subsp. israelensis and Bacillus sphaericus formulations against Culex pipiens larvae in septic tanks in Antalya, Turkey.

PubMed

Cetin, Huseyin; Dechant, Peter; Yanikoglu, Atila

2007-06-01

Efficacy of tank mixtures of commercial Bacillus thuringiensis subsp. israelensis (Bti) and Bacillus sphaericus (Bs) water-dispersable granule (WDG) formulations was evaluated in septic tanks, against Culex pipiens L. (Diptera: Culicidae) larvae. VectoLex WDG (Bs) + VectoBac WDG (Bti) were evaluated at various ratios from 488 g/ha VectoLex + 250 g/ha VectoBac up to 3,000 g/ha of each. All applications and ratios delivering VectoLex WDG at a rate equal to or greater than 988 g/ha provided more than 90% control for 28 days after treatment. The lowest dose provided this level of control for at least 7 days after treatment, with greater than 80% control after 2 wk. These results suggest that a retreatment interval of 2 wk is recommended with the lowest dose and retreatment intervals of 4 or more wk are recommended with the doses equal to or higher than 988 g/ha VectoLex + 250 g/ha VectoBac.

Three-dimensional relativistic field-electron interaction in a multicavity high-power klystron. 1: Basic theory

NASA Technical Reports Server (NTRS)

Kosmahl, H. G.

1982-01-01

A theoretical investigation of three dimensional relativistic klystron action is described. The relativistic axisymmetric equations of motion are derived from the time-dependent Lagrangian function for a charged particle in electromagnetic fields. An analytical expression of the fringing RF electric and magnetic fields within and in the vicinity of the interaction gap and the space-charge forces between axially and radially elastic deformable rings of charges are both included in the formulation. This makes an accurate computation of electron motion through the tunnel of the cavities and the drift tube spaces possible. Method of analysis is based on Lagrangian formulation. Bunching is computed using a disk model of electron stream in which the electron stream is divided into axisymmetric disks of equal charge and each disk is assumed to consist of a number of concentric rings of equal charges. The Individual representative groups of electrons are followed through the interaction gaps and drift tube spaces. Induced currents and voltages in interacting cavities are calculated by invoking the Shockley-Ramo theorem.

Intranasal delivery of Norwalk virus-like particles formulated in an in-situ gelling, dry powder vaccine

PubMed Central

Velasquez, Lissette S.; Shira, Samantha; Berta, Alice N.; Kilbourne, Jacquelyn; Medi, Babu M.; Tizard, Ian; Ni, Yawei; Arntzen, Charles J.; Herbst-Kralovetz, Melissa M.

2011-01-01

The development of a vaccine to prevent norovirus infections has been focused on immunization at a mucosal surface, but has been limited by the low immunogenicity of self-assembling Norwalk virus-like particles (NV VLPs) delivered enterically or at nasal surfaces. Nasal immunization, which offers the advantage of ease of immunization, faces obstacles imposed by the normal process of mucociliary clearance, which limits residence time of applied antigens. Herein, we describe the use of a dry powder formulation (GelVac) of an inert in-situ gelling polysaccharide (GelSite) extracted from Aloe vera for nasal delivery of NV VLP antigen. Powder formulations, with or without NV VLP antigen, were similar in structure in dry form or when rehydrated in simulated nasal fluids. Immunogenicity of the dry powder VLP formulation was compared to equivalent antigen/adjuvant liquid formulations in animals. For the GelVac powder, we observed superior NV-specific serum and mucosal (aerodigestive and reproductive tracts) antibody responses relative to liquid formulations. Incorporation of TLR7 agonist gardiquimod in dry powder formulations did not enhance antibody responses, although its inclusion in liquid formulations did enhance VLP immunogenicity irrespective of the presence or absence of GelSite. We interpret these data as showing that GelSite-based dry powder formulations 1.) stabilize the immunogenic structural properties of VLPs and 2.) induce systemic and mucosal antibody titers which are equal or greater than those achieved by VLPs plus adjuvant in a liquid formulation. We conclude that in-situ gelation of the GelVac dry powder formulation at nasal mucosal surfaces delays mucociliary clearance and thereby prolongs VLP antigen exposure to immune effector sites. PMID:21640778

In vitro assessment of artificial saliva formulations on initial enamel erosion remineralization.

PubMed

Ionta, Franciny Querobim; Mendonça, Fernanda Lyrio; de Oliveira, Gabriela Cristina; de Alencar, Catarina Ribeiro Barros; Honório, Heitor Marques; Magalhães, Ana Carolina; Rios, Daniela

2014-02-01

Various formulations of artificial saliva are present in the literature and little guidance is available on the standardization of type of saliva for use in in vitro protocols for erosive studies. The aim of this study was to evaluate the remineralizing capacity of different formulations of artificial saliva on initial enamel erosive lesion. Bovine enamel blocks were subjected to short-term acidic exposure by immersion in citric acid 0.05 M (pH 2.5) for 15s, resulting in surface softening without tissue loss. Then 90 selected eroded enamel blocks were randomly and equally divided into 6 groups according to saliva formulation (n=15): Saliva 1 (contain mucin); Saliva 2 (Saliva 1 without mucin); Saliva 3; Saliva 4; Saliva 5 (contain sodium carboxymethyl cellulose) and control (C) (deionized water). After demineralization enamel blocks were subjected to remineralization by immersion in the saliva's formulations for 2h. Enamel remineralization was measured by superficial hardness test (% superficial hardness change). The data were tested using ANOVA and Tukey's test (p<0.05). All the tested formulations of artificial saliva resulted in significantly higher enamel remineralization compared to control (p<0.001). Saliva 3 showed higher percentage of enamel remineralization than Saliva 5 (p<0.05). Besides the variety of artificial saliva for erosion in vitro protocols, all the formulations tested were able to partially remineralize initial erosive lesions. Copyright © 2013. Published by Elsevier Ltd.

Comparison of the pharmacokinetics and safety of three formulations of infliximab (CT-P13, EU-approved reference infliximab and the US-licensed reference infliximab) in healthy subjects: a randomized, double-blind, three-arm, parallel-group, single-dose, Phase I study.

PubMed

Park, Won; Lee, Sang Joon; Yun, Jihye; Yoo, Dae Hyun

2015-01-01

To compare the pharmacokinetics (PK), safety and tolerability of biosimilar infliximab (CT-P13 [Remsima(®), Inflectra(®)]) with two formulations of the reference medicinal product (RMP) (Remicade(®)) from either Europe (EU-RMP) or the USA (US-RMP). This was a double-blind, three-arm, parallel-group study (EudraCT number: 2013-003173-10). Healthy subjects received single doses (5 mg/kg) of CT-P13 (n = 71), EU-RMP (n = 71) or US-RMP (n = 71). The primary objective was to compare the PK profiles for the three formulations. Assessments of comparative safety and tolerability were secondary objectives. Baseline demographics were well balanced across the three groups. Primary end points (Cmax, AUClast and AUCinf) were equivalent between all formulations (CT-P13 vs EU-RMP; CT-P13 vs US-RMP; EU-RMP vs US-RMP). All other PK end points supported the high similarity of the three treatments. Tolerability profiles of the formulations were similar. The PK profile of CT-P13 is highly similar to EU-RMP and US-RMP. All three formulations were equally well tolerated.

A new family of stable elements for the Stokes problem based on a mixed Galerkin/least-squares finite element formulation

NASA Technical Reports Server (NTRS)

Franca, Leopoldo P.; Loula, Abimael F. D.; Hughes, Thomas J. R.; Miranda, Isidoro

1989-01-01

Adding to the classical Hellinger-Reissner formulation, a residual form of the equilibrium equation, a new Galerkin/least-squares finite element method is derived. It fits within the framework of a mixed finite element method and is stable for rather general combinations of stress and velocity interpolations, including equal-order discontinuous stress and continuous velocity interpolations which are unstable within the Galerkin approach. Error estimates are presented based on a generalization of the Babuska-Brezzi theory. Numerical results (not presented herein) have confirmed these estimates as well as the good accuracy and stability of the method.

Development of polyisocyanurate pour foam formulation for space shuttle external tank thermal protection system. Final technical report, March 1986-October 1987

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harvey, J.A.; Butler, J.M.; Chartoff, R.P.

1988-08-01

Four commercially available polyisocyanurate polyurethane spray-foam insulation formulations are used to coat the external tank of the space shuttle. There are several problems associated with these formulations. For example, some do not perform well as pourable closeout/repair systems. Some do not perform well at cryogenic temperatures (poor adhesion to aluminum at liquid nitrogen temperatures). Their thermal stability at elevated temperatures is not adequate. A major defect in all the systems is the lack of detailed chemical information. The formulations are simply supplied to NASA and Martin Marietta, the primary contractor, as components; Part A (isocyanate) and Part B (poly(s) andmore » additives). Because of the lack of chemical information the performance behavior data for the current system, NASA sought the development of a non-proprietary room temperature curable foam insulation. Requirements for the developed system were that it should exhibit equal or better thermal stability both at elevated and cryogenic temperatures with better adhesion to aluminum as compared to the current system. Several formulations were developed that met these requirements, i.e., thermal stability, good pourability, and good bonding to aluminum.« less

Uniform Test Assembly

ERIC Educational Resources Information Center

Belov, Dmitry I.

2008-01-01

In educational practice, a test assembly problem is formulated as a system of inequalities induced by test specifications. Each solution to the system is a test, represented by a 0-1 vector, where each element corresponds to an item included (1) or not included (0) into the test. Therefore, the size of a 0-1 vector equals the number of items "n"…

The Politics, Policies and Progress of Basic Education in Sri Lanka. CREATE Pathways to Access. Research Monograph No. 38

ERIC Educational Resources Information Center

Little, Angela W.

2010-01-01

Sri Lanka is hailed internationally for her achievements in literacy, access to education and equality of educational opportunity. However, progress has not been straightforward due to the complex interactions between politics, policy formulation, and the implementation of reforms. This dynamic process has often led to contradictory outcomes. This…

A Model of Resource Allocation in Public School Districts: A Theoretical and Empirical Analysis.

ERIC Educational Resources Information Center

Chambers, Jay G.

This paper formulates a comprehensive model of resource allocation in a local public school district. The theoretical framework specified could be applied equally well to any number of local public social service agencies. Section 1 develops the theoretical model describing the process of resource allocation. This involves the determination of the…

Policies on Private Education: An Economics Analysis

ERIC Educational Resources Information Center

Fengqiao, Yan

2009-01-01

Basic principles and analytical methods of economics are used to conduct a preliminary study of state policies for private education in China. It is evident that if public policy is to exert a positive effect on private education, the government must formulate policies at a higher level for private education and give equal attention to choice,…

WEALTH, EXPENDITURES AND DECISION-MAKING FOR EDUCATION.

ERIC Educational Resources Information Center

JAMES, H. THOMAS; AND OTHERS

THE SECOND IN A SERIES OF STUDIES OF THE PROCESSES BY WHICH RESOURCES IN THE UNITED STATES ARE ALLOCATED TO THE SUPPORT OF PUBLIC EDUCATION IS PRESENTED. A RATIONALE FOR THE STUDY OF SCHOOL FINANCE WAS FORMULATED AND APPLIED TO EXPLAIN VARIATIONS IN EXPENDITURES ASSOCIATED WITH STATE EFFORTS TO EQUALIZE BOTH EDUCATIONAL BENEFITS AND TAX LOADS.…

Antipyretic potential of herbal coded formulation (Pyrexol).

PubMed

Khan, Muhammad Sajid; Hamid, Abdul; Akram, Muhammad; Mustafa, Sodah Bint; Sami, Abdul; Shah, Syed Muhammad Ali; Usmanghani, Khan

2017-01-01

The antipyretic effect of the aqueous extract of herbal coded formulation containing equal amount of Salix alba, Emblica officinalis, Glycyrrhiza glabra, Adhatoda vasica, Viola odorata, Thea sinensis, Veleriana officinalis, Foeniculum vulgare, Sisymbrium irrio and Achillea millefolium was investigated using the yeast induced pyrexia model in rabbits. Paracetamol was used as a control group. Rectal temperatures of all rabbits were recorded immediately before the administration of the extract or paracetamol and again at 1 hour, after this, temperature was noted at 1 hrs interval for 5 hrs using digital thermometer. At 240mg/kg dose the extract showed significant reduction in yeast-induced elevated temperature as compared with that of standard drug paracetamol (150mg/kg). It is concluded that herbal coded medicine at a dose of 240mg/kg has marked antipyretic activity in animal models and this strongly supports the ethno pharmacological uses of medicinal plants of this formulation.

A solid criterion based on strict LMI without invoking equality constraint for stabilization of continuous singular systems.

PubMed

Zhang, Xuefeng; Chen, YangQuan

2017-11-01

The paper considers the stabilization issue of linear continuous singular systems by dealing with strict linear matrix inequalities (LMIs) without invoking equality constraint and proposes a complete and effective solved LMIs formulation. The criterion is necessary and sufficient condition and can be directly solved the feasible solutions with LMI toolbox and is much more tractable and reliable in numerical simulation than existing results, which involve positive semi-definite LMIs with equality constraints. The most important property of the criterion proposed in the paper is that it can overcome the drawbacks of the invalidity caused by the singularity of Ω=PE T +SQ for stabilization of singular systems. Two counterexamples are presented to avoid the disadvantages of the existing condition of stabilization of continuous singular systems. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Development of an instant coffee enriched with chlorogenic acids.

PubMed

Corso, Marinês Paula; Vignoli, Josiane Alessandra; Benassi, Marta de Toledo

2016-03-01

The objective of this study was to present possible formulations for an instant coffee product enriched with chlorogenic acids for the Brazilian market. Formulations were prepared with different concentrations of freeze dried extracts of green Coffea canephora beans (G) added to freeze dried extracts of roasted Coffea arabica (A) and Coffea canephora (C). Medium (M) and dark (D) roasting degrees instant coffee were produced (AM, AD, CM and CD) to obtain four formulations with green extract addition (AMG, ADG, CMG and CDG). Chlorogenic acids were determined by HPLC, with average contents of 7.2 %. Roasted extracts and formulations were evaluated for 5-CQA and caffeine contents (by HPLC), browned compounds (absorbance 420 nm), and antioxidant activity (ABTS and Folin). Coffee brews of the four formulations were also assessed in a lab-scale test by 42 consumers for acceptance of the color, aroma, flavor and body, overall acceptance and purchase intent, using a 10 cm hybrid scale. The formulations obtained acceptance scores of 6.6 and 7.7 for all attributes, thus they were equally acceptable. Greater purchase intent was observed for ADG, CDG and CMG (6.9) in comparison to AMG (6.1). The formulations had, on average, 2.5 times more 5-CQA than the average obtained from conventional commercial instant coffees. In addition to being more economically viable, the formulations developed with C. canephora (CDG and CMG) showed greater antioxidant potential (32.5 g of Trolox/100 g and 13.8 g of gallic acid equivalent/100 g) due to a balance in the amount of bioactive compounds.

Comparison of the antifungal efficacy of terbinafine hydrochloride and ciclopirox olamine containing formulations against the dermatophyte Trichophyton rubrum in an infected nail plate model.

PubMed

Täuber, Anja; Müller-Goymann, Christel C

2014-07-07

Onychomycosis is a fungal infection mostly induced by dermatophytes such as Trichophyton rubrum. Due to slow nail growth, the treatment takes 3-9 months depending on the nail size and infected area. Hence, high efficacy of the active ingredient without systemic side effects is of major interest. To test the efficacy of an antifungal formulation, an appropriate in vitro model reflecting the in vivo situation as close as possible is required. In this study, a variety of antifungal formulations, i.e., commercial ones (Ciclopoli and Lamisil cream), those used in compounding pharmacies (Pentravan) as well as poloxamer 407-based systems, have been evaluated in an infected nail plate model. The active pharmaceutical ingredients (APIs) were ciclopirox olamine and terbinafine hydrochloride. The poloxamer 407-based formulations consisted of poloxamer 407, double distilled water, propylene glycol, isopropyl alcohol, medium chain triglycerides and either 1% ciclopirox olamine or 1% terbinafine hydrochloride as API, respectively. Former studies have shown high permeation rates of terbinafine hydrochloride from similar poloxamer 407-based formulations with dimethyl isosorbide instead of propylene glycol. The present contribution shows superior inhibition of T. rubrum growth from poloxamer 407-based formulations in comparison to the commercial Lamisil cream. Moreover, poloxamer 407-based formulations were equally effective as the nail lacquer Ciclopoli even though the poloxamer formulations contained only 1% of the drug instead of 8% in the marketed lacquer. Poloxamer 407-based systems containing ciclopirox olamine proved to be about as effective as similar terbinafine hydrochloride systems.

Green nanoemulsion-laden glyphosate isopropylamine formulation in suppressing creeping foxglove (A. gangetica), slender button weed (D. ocimifolia) and buffalo grass (P. conjugatum).

PubMed

Lim, Chaw Jiang; Basri, Mahiran; Omar, Dzolkhifli; Abdul Rahman, Mohd Basyaruddin; Salleh, Abu Bakar; Raja Abdul Rahman, Raja Noor Zaliha

2013-01-01

Pesticides are developed with carriers to improve their physicochemical properties and, accordingly, the bioefficacy of the applied formulation. For foliar-applied herbicide, generally less than 0.1% of the active ingredient reaching the target site could reduce pesticide performance. Recently, a carrier of nanoemulsion consisting of oil, surfactant and water, with a particle size of less than 200 nm, has been shown to enhance drug permeability for skin penetration in pharmaceutical delivery systems. In the present work, the aim was to formulate a water-soluble herbicide, glyphosate isopropylamine (IPA), using a green nanoemulsion system for a biological activity study against the weeds creeping foxglove, slender button weed and buffalo grass. The nanoemulsion formulations displayed a significantly lower spray deposition on creeping foxglove (2.9-3.5 ng cm(-2) ), slender button weed (2.6-2.9 ng cm(-2) ) and buffalo grass (1.8-2.4 ng cm(-2) ) than Roundup(®) (3.7-5.1 ng cm(-2) ). The visible injury rates of weeds treated with the nanoemulsion formulations were statistically equivalent to those relating to Roundup(®) at 14 days after treatment, with a control range of 86.67-96.67%. It was hypothesised that the significant difference in spray deposition with equal injury rates can be attributed to enhanced bioactivity of the nanoemulsion formulations. This initial discovery could be the platform for developing better penetration of agrochemical formulations in the future. Copyright © 2013 Society of Chemical Industry.

Fate and efficacy of metolachlor granular and emulsifiable concentrate formulations in a conservation tillage system.

PubMed

Potter, Thomas L; Gerstl, Zev; White, Paul W; Cutts, George S; Webster, Theodore M; Truman, Clint C; Strickland, Timothy C; Bosch, David D

2010-10-13

Use of genetically modified cultivars resistant to the herbicide glyphosate (N-phosphonomethylglycine) is strongly associated with conservation-tillage (CsT) management for maize ( Zea mays L.), soybean ( Glycine max L.), and cotton ( Gossypium hirsutum L.) cultivation. Due to the emergence of glyphosate-resistant weed biotypes, alternate weed management practices are needed to sustain CsT use. This work focused on metolachlor use (2-chloro-N-(2-ethyl-6-methylphenyl)-N-(2-methoxy-1-methylethyl)acetamide) in a CsT system. The fate and efficacy of granular and emulsifiable concentrate (EC) formulations or an EC surrogate were compared for CsT cotton production in the Atlantic Coastal Plain region of southern Georgia (USA). The granular formulation, a clay-alginate polymer, was produced in the authors' laboratory; EC was a commercial product. In field and laboratory dissipations the granular metolachlor exhibited 8-fold greater soil persistence. Rainfall simulation runoff assessments indicated that use of the granular formulation in a common CsT system, strip-tillage (ST), may reduce metolachlor runoff loss when compared to conventional tillage (CT) management or when EC formulations are used in the ST system. Metolachlor leaching assessments using field-deployed lysimeters showed some tillage (ST > CT) and formulation (EC > granular) differences. Overall leaching was generally small when compared to runoff loss. Finally, greenhouse bioassays showed control of two weed species with the granular was greater than or equal to that of the EC formulation; however, the granular formulation suppressed cotton growth to a greater extent. In sum, this metolachlor granular formulation has advantages for CsT cotton production; however, additional research is needed to assess impacts on crop injury.

Using a constrained formulation based on probability summation to fit receiver operating characteristic (ROC) curves

NASA Astrophysics Data System (ADS)

Swensson, Richard G.; King, Jill L.; Good, Walter F.; Gur, David

2000-04-01

A constrained ROC formulation from probability summation is proposed for measuring observer performance in detecting abnormal findings on medical images. This assumes the observer's detection or rating decision on each image is determined by a latent variable that characterizes the specific finding (type and location) considered most likely to be a target abnormality. For positive cases, this 'maximum- suspicion' variable is assumed to be either the value for the actual target or for the most suspicious non-target finding, whichever is the greater (more suspicious). Unlike the usual ROC formulation, this constrained formulation guarantees a 'well-behaved' ROC curve that always equals or exceeds chance- level decisions and cannot exhibit an upward 'hook.' Its estimated parameters specify the accuracy for separating positive from negative cases, and they also predict accuracy in locating or identifying the actual abnormal findings. The present maximum-likelihood procedure (runs on PC with Windows 95 or NT) fits this constrained formulation to rating-ROC data using normal distributions with two free parameters. Fits of the conventional and constrained ROC formulations are compared for continuous and discrete-scale ratings of chest films in a variety of detection problems, both for localized lesions (nodules, rib fractures) and for diffuse abnormalities (interstitial disease, infiltrates or pnumothorax). The two fitted ROC curves are nearly identical unless the conventional ROC has an ill behaved 'hook,' below the constrained ROC.

Design and optimization of self-nanoemulsifying drug delivery systems (SNEDDS) for enhanced dissolution of gemfibrozil.

PubMed

Villar, Ana Maria Sierra; Naveros, Beatriz Clares; Campmany, Ana Cristina Calpena; Trenchs, Monserrat Aróztegui; Rocabert, Coloma Barbé; Bellowa, Lyda Halbaut

2012-07-15

Self-nanoemulsifying drug delivery systems of gemfibrozil were developed under Quality by Design approach for improvement of dissolution and oral absorption. Preliminary screening was performed to select proper components combination. Box-Behnken experimental design was employed as statistical tool to optimize the formulation variables, X(1) (Cremophor(®) EL), X(2) (Capmul(®) MCM-C8), and X(3) (lemon essential oil). Systems were assessed for visual characteristics (emulsification efficacy), turbidity, droplet size, polydispersity index and drug release. Different pH media were also assayed for optimization. Following optimization, the values of formulation components (X(1), X(2), and X(3)) were 32.43%, 29.73% and 21.62%, respectively (16.22% of gemfibrozil). Transmission electron microscopy demonstrated spherical droplet morphology. SNEEDS release study was compared to commercial tablets. Optimized SNEDDS formulation of gemfibrozil showed a significant increase in dissolution rate compared to conventional tablets. Both formulations followed Weibull mathematical model release with a significant difference in t(d) parameter in favor of the SNEDDS. Equally amodelistic parameters were calculated being the dissolution efficiency significantly higher for SNEDDS, confirming that the developed SNEDDS formulation was superior to commercial formulation with respect to in vitro dissolution profile. This paper provides an overview of the SNEDDS of the gemfibrozil as a promising alternative to improve oral absorption. Copyright © 2012 Elsevier B.V. All rights reserved.

Item Information in the Rasch Model. Project Psychometric Aspects of Item Banking No. 34. Research Report 88-7.

ERIC Educational Resources Information Center

Engelen, Ron J. H.; And Others

Fisher's information measure for the item difficulty parameter in the Rasch model and its marginal and conditional formulations are investigated. It is shown that expected item information in the unconditional model equals information in the marginal model, provided the assumption of sampling examinees from an ability distribution is made. For the…

Mixing Regimes in a Spatially Confined, Two-Dimensional, Supersonic Shear Layer

DTIC Science & Technology

1992-07-31

MODEL ................................... 3 THE MODEL PROBLEMS .............................................. 6 THE ONE-DIMENSIONAL PROBLEM...the effects of the numerical diffusion on the spectrum. Guirguis et al.ś and Farouk et al."’ have studied spatially evolving mixing layers for equal...approximations. Physical and Numerical Model General Formulation We solve the time-dependent, two-dimensional, compressible, Navier-Stokes equations for a

A rational interpolation method to compute frequency response

NASA Technical Reports Server (NTRS)

Kenney, Charles; Stubberud, Stephen; Laub, Alan J.

1993-01-01

A rational interpolation method for approximating a frequency response is presented. The method is based on a product formulation of finite differences, thereby avoiding the numerical problems incurred by near-equal-valued subtraction. Also, resonant pole and zero cancellation schemes are developed that increase the accuracy and efficiency of the interpolation method. Selection techniques of interpolation points are also discussed.

Development of equally intelligible Telugu sentence-lists to test speech recognition in noise.

PubMed

Tanniru, Kishore; Narne, Vijaya Kumar; Jain, Chandni; Konadath, Sreeraj; Singh, Niraj Kumar; Sreenivas, K J Ramadevi; K, Anusha

2017-09-01

To develop sentence lists in the Telugu language for the assessment of speech recognition threshold (SRT) in the presence of background noise through identification of the mean signal-to-noise ratio required to attain a 50% sentence recognition score (SRTn). This study was conducted in three phases. The first phase involved the selection and recording of Telugu sentences. In the second phase, 20 lists, each consisting of 10 sentences with equal intelligibility, were formulated using a numerical optimisation procedure. In the third phase, the SRTn of the developed lists was estimated using adaptive procedures on individuals with normal hearing. A total of 68 native Telugu speakers with normal hearing participated in the study. Of these, 18 (including the speakers) performed on various subjective measures in first phase, 20 performed on sentence/word recognition in noise for second phase and 30 participated in the list equivalency procedures in third phase. In all, 15 lists of comparable difficulty were formulated as test material. The mean SRTn across these lists corresponded to -2.74 (SD = 0.21). The developed sentence lists provided a valid and reliable tool to measure SRTn in Telugu native speakers.

Nonlinear mode interaction in equal-leg angle struts susceptible to cellular buckling.

PubMed

Bai, L; Wang, F; Wadee, M A; Yang, J

2017-11-01

A variational model that describes the interactive buckling of a thin-walled equal-leg angle strut under pure axial compression is presented. A formulation combining the Rayleigh-Ritz method and continuous displacement functions is used to derive a system of differential and integral equilibrium equations for the structural component. Solving the equations using numerical continuation reveals progressive cellular buckling (or snaking) arising from the nonlinear interaction between the weak-axis flexural buckling mode and the strong-axis flexural-torsional buckling mode for the first time-the resulting behaviour being highly unstable. Physical experiments conducted on 10 cold-formed steel specimens are presented and the results show good agreement with the variational model.

Pharmacokinetics of IDX184, a liver-targeted oral prodrug of 2'-methylguanosine-5'-monophosphate, in the monkey and formulation optimization for human exposure.

PubMed

Pan-Zhou, Xin-Ru; Mayes, Benjamin A; Rashidzadeh, Hassan; Gasparac, Rahela; Smith, Steven; Bhadresa, Sanjeev; Gupta, Kusum; Cohen, Marita Larsson; Bu, Charlie; Good, Steven S; Moussa, Adel; Rush, Roger

2016-10-01

IDX184 is a phosphoramidate prodrug of 2'-methylguanosine-5'-monophosphate, developed to treat patients infected with hepatitis C virus. A mass balance study of radiolabeled IDX184 and pharmacokinetic studies of IDX184 in portal vein-cannulated monkeys revealed relatively low IDX184 absorption but higher exposure of IDX184 in the portal vein than in the systemic circulation, indicating >90 % of the absorbed dose was subject to hepatic extraction. Systemic exposures to the main metabolite, 2'-methylguanosine (2'-MeG), were used as a surrogate for liver levels of the pharmacologically active entity 2'-MeG triphosphate, and accordingly, systemic levels of 2'-MeG in the monkey were used to optimize formulations for further clinical development of IDX184. Capsule formulations of IDX184 delivered acceptable levels of 2'-MeG in humans; however, the encapsulation process introduced low levels of the genotoxic impurity ethylene sulfide (ES), which necessitated formulation optimization. Animal pharmacokinetic data guided the development of a tablet with trace levels of ES and pharmacokinetic performance equal to that of the clinical capsule in the monkey. Under fed conditions in humans, the new tablet formulation showed similar exposure to the capsule used in prior clinical trials.

Managing severe pain and abuse potential: the potential impact of a new abuse-deterrent formulation oxycodone/naltrexone extended-release product.

PubMed

Pergolizzi, Joseph V; Taylor, Robert; LeQuang, Jo Ann; Raffa, Robert B

2018-01-01

Proper management of severe pain represents one of the most challenging clinical dilemmas. Two equally important goals must be attained: the humanitarian/medical goal to relieve suffering and the societal/legal goal to not contribute to the drug abuse problem. This is an age-old problem, and the prevailing emphasis placed on one or the other goal has resulted in pendulum swings that have resulted in either undertreatment of pain or the current epidemic of misuse and abuse. In an effort to provide efficacious strong pain relievers (opioids) that are more difficult to abuse by the most dangerous routes of administration, pharmaceutical companies are developing products in which the opioid is manufactured in a formulation that is designed to be tamper resistant. Such a product is known as an abuse-deterrent formulation (ADF). ADF opioid products are designed to deter or resist abuse by making it difficult to tamper with the product and extracting the opioid for inhalation or injection. To date, less than a dozen opioid formulations have been approved by the US Food and Drug Administration to carry specific ADF labeling, but this number will likely increase in the coming years. Most of these products are extended-release formulations.

A weighted generalized score statistic for comparison of predictive values of diagnostic tests.

PubMed

Kosinski, Andrzej S

2013-03-15

Positive and negative predictive values are important measures of a medical diagnostic test performance. We consider testing equality of two positive or two negative predictive values within a paired design in which all patients receive two diagnostic tests. The existing statistical tests for testing equality of predictive values are either Wald tests based on the multinomial distribution or the empirical Wald and generalized score tests within the generalized estimating equations (GEE) framework. As presented in the literature, these test statistics have considerably complex formulas without clear intuitive insight. We propose their re-formulations that are mathematically equivalent but algebraically simple and intuitive. As is clearly seen with a new re-formulation we presented, the generalized score statistic does not always reduce to the commonly used score statistic in the independent samples case. To alleviate this, we introduce a weighted generalized score (WGS) test statistic that incorporates empirical covariance matrix with newly proposed weights. This statistic is simple to compute, always reduces to the score statistic in the independent samples situation, and preserves type I error better than the other statistics as demonstrated by simulations. Thus, we believe that the proposed WGS statistic is the preferred statistic for testing equality of two predictive values and for corresponding sample size computations. The new formulas of the Wald statistics may be useful for easy computation of confidence intervals for difference of predictive values. The introduced concepts have potential to lead to development of the WGS test statistic in a general GEE setting. Copyright © 2012 John Wiley & Sons, Ltd.

A weighted generalized score statistic for comparison of predictive values of diagnostic tests

PubMed Central

Kosinski, Andrzej S.

2013-01-01

Positive and negative predictive values are important measures of a medical diagnostic test performance. We consider testing equality of two positive or two negative predictive values within a paired design in which all patients receive two diagnostic tests. The existing statistical tests for testing equality of predictive values are either Wald tests based on the multinomial distribution or the empirical Wald and generalized score tests within the generalized estimating equations (GEE) framework. As presented in the literature, these test statistics have considerably complex formulas without clear intuitive insight. We propose their re-formulations which are mathematically equivalent but algebraically simple and intuitive. As is clearly seen with a new re-formulation we present, the generalized score statistic does not always reduce to the commonly used score statistic in the independent samples case. To alleviate this, we introduce a weighted generalized score (WGS) test statistic which incorporates empirical covariance matrix with newly proposed weights. This statistic is simple to compute, it always reduces to the score statistic in the independent samples situation, and it preserves type I error better than the other statistics as demonstrated by simulations. Thus, we believe the proposed WGS statistic is the preferred statistic for testing equality of two predictive values and for corresponding sample size computations. The new formulas of the Wald statistics may be useful for easy computation of confidence intervals for difference of predictive values. The introduced concepts have potential to lead to development of the weighted generalized score test statistic in a general GEE setting. PMID:22912343

Simulation of global oceanic upper layers forced at the surface by an optimal bulk formulation derived from multi-campaign measurements.

NASA Astrophysics Data System (ADS)

Garric, G.; Pirani, A.; Belamari, S.; Caniaux, G.

2006-12-01

order to improve the air/sea interface for the future MERCATOR global ocean operational system, we have implemented the new bulk formulation developed by METEO-FRANCE (French Meteo office) in the MERCATOR 2 degree global ocean-ice coupled model (ORCA2/LIM). A single bulk formulation for the drag, temperature and moisture exchange coefficients is derived from an extended consistent database gathering 10 years of measurements issued from five experiments dedicated to air-sea fluxes estimates (SEMAPHORE, CATCH, FETCH, EQUALANT99 and POMME) in various oceanic basins (from Northern to equatorial Atlantic). The available database (ALBATROS) cover the widest range of atmospheric and oceanic conditions, from very light (0.3 m/s) to very strong (up to 29 m/s) wind speeds, and from unstable to extremely stable atmospheric boundary layer stratification. We have defined a work strategy to test this new formulation in a global oceanic context, by using this multi- campaign bulk formulation to derive air-sea fluxes from base meteorological variables produces by the ECMWF (European Centre for Medium Range and Weather Forecast) atmospheric forecast model, in order to get surface boundary conditions for ORCA2/LIM. The simulated oceanic upper layers forced at the surface by the previous air/sea interface are compared to those forced by the optimal bulk formulation. Consecutively with generally weaker transfer coefficient, the latter formulation reduces the cold bias in the equatorial Pacific and increases the too weak summer sea ice extent in Antarctica. Compared to a recent mixed layer depth (MLD) climatology, the optimal bulk formulation reduces also the too deep simulated MLDs. Comparison with in situ temperature and salinity profiles in different areas allowed us to evaluate the impact of changing the air/sea interface in the vertical structure.

AFAL (Air Force Astronautics Laboratory) Technical Objective Document FY89.

DTIC Science & Technology

1987-12-01

propellant manufacture that arc s Wu’ ’ " - applications. TITLE: Ultrasonic Nondestructive Evaluation fur Solid ’nu -! , c.. Performance Period: Jul 88...Develop and demonstrate a stabilizer system for (GAP propellants that provides protection equal to that achieved in HTPB propellants. Formulate GAP...monitoring equipment will be used to determine propagation and attenuation effects. 95 TITLE: Advanced Nuclear Propulsion Performance Period: Jan 89

Comment on “On the Crooks fluctuation theorem and the Jarzynski equality” [J. Chem. Phys. 129, 091101 (2008)

PubMed Central

Adib, Artur B.

2009-01-01

It has recently been argued that a self-consistency condition involving the Jarzynski equality (JE) and the Crooks fluctuation theorem (CFT) is violated for a simple Brownian process [L. Y. Chen, J. Chem. Phys.129, 091101 (2008)]. This note adopts the definitions in the original formulation of the JE and CFT and demonstrates the contrary. PMID:19566186

Efficacy and safety of a new 450 mg/ml florfenicol formulation administered intramuscularly in the treatment of bacterial bovine respiratory disease.

PubMed

Thiry, J; Rubion, S; Sarasola, P; Bonnier, M; Hartmann, M; de Haas, V

2011-11-12

The objective of the study was the safety and efficacy evaluation of a new 450 mg/ml florfenicol formulation in the treatment of naturally occurring respiratory disease when administered intramuscularly, compared with a positive control group treated with the well-established 300 mg/ml formulation. A total of 174 calves, selected from five sites in France and Spain, aged from 1 to 17 months, showing severe signs of respiratory disease, were randomly assigned to treatment with either the 300 mg/ml (3 ml/45 kg; Nuflor; MSD Animal Health) or 450 mg/ml (2 ml/45 kg; Nuflor Minidose; MSD Animal Health) florfenicol formulation, both administered intramuscularly twice, two days apart. Animals were clinically observed daily for 14 days following treatment initiation. The predominant pathogens present in pretreatment respiratory tract samples were Mannheimia haemolytica and Pasteurella multocida. Mycoplasma bovis and Histophilus somni were also present. All isolates were subjected to in vitro sensitivity testing and found susceptible to florfenicol. In both treatment groups, rectal temperature dropped and clinical index (depression and respiratory signs) significantly improved (P<0.05) after treatment. As a result, 97.7 per cent of the 450 mg/ml florfenicol formulation-treated animals were considered treatment successes on day 5. On day 14, 67.82 per cent of the animals were classified as treatment successes and among them 63.22 per cent were cured. The intramuscular injection of the new 450 mg/ml florfenicol formulation was found equally efficacious as the original 300 mg/ml formulation.

Leaching of zinc compound from rubber stoppers into the contents of automatic atropine injectors.

PubMed

Ellin, R I; Kaminskis, A; Zvirblis, P; Sultan, W E; Shutz, M B; Matthews, R

1985-07-01

This report describes how a material within the cartridge of an automatic injector contaminated its contents. On prolonged storage, a formulation that contained atropine produced lethality in mice. The toxic material originated from zinc compounds that were present in the rubber stopper and plunger of the container and that subsequently leached into the formulation. The contents of cartridges that contained greater than or equal to 0.75 mg/mL of solubilized zinc were lethal to at least 20% of the mice tested; those that contained 0.42 mg/mL showed no lethality. The problem resulted from the physicochemical properties of the rubber, not the concentration of zinc used in the vulcanization process.

Tribological bench and engine dynamometer tests of a low viscosity SAE 0W-16 engine oil using a combination of ionic liquid and ZDDP as anti-wear additives

DOE PAGES

Barnhill, William C.; Gao, Hong; Kheireddin, Bassem; ...

2015-09-29

We have previously reported an oil-miscible phosphonium-organophosphate ionic liquid (IL) with an effective anti-wear (AW) functionality when added to a base oil by itself or combined with a conventional zinc dialkyldithiophosphate (ZDDP) for a synergistic effect. In this research, we investigated whether this synergy manifests in formulated engine oils. An experimental SAE 0W-16 engine oil was generated containing a combination of IL and ZDDP with equal phosphorus contribution. The prototype engine oil was first evaluated using tribological bench tests: AW performance in boundary lubrication (BL) and friction behavior (Stribeck curves) in elastohydrodynamic, mixed, and BL. In addition, the forthcoming standardmore » Sequence VIE engine dynamometer test was then conducted to demonstrate improved fuel economy. Results were benchmarked against those of another experimental engine oil with almost the same formulation except using ZDDP only without the IL (similar total phosphorus content). The IL-ZDDP formulation consistently outperforms the ZDDP-only formulation in friction reduction and wear protection, and results from the bench and engine tests are well correlated.« less

Morphodynamic Modeling of the Lower Yellow River, China: Flux (Equilibrium) Form or Entrainment (Nonequilibrium) Form of Sediment Mass Conservation?

NASA Astrophysics Data System (ADS)

An, C.; Parker, G.; Ma, H.; Naito, K.; Moodie, A. J.; Fu, X.

2017-12-01

Models of river morphodynamics consist of three elements: (1) a treatment of flow hydraulics, (2) a formulation relating some aspect of sediment transport to flow hydraulics, and (3) a description of sediment conservation. In the case of unidirectional river flow, the Exner equation of sediment conservation is commonly described in terms of a flux-based formulation, in which bed elevation variation is related to the streamwise gradient of sediment transport rate. An alternate formulation of the Exner equation, however, is the entrainment-based formulation in which bed elevation variation is related to the difference between the entrainment rate of bed sediment into suspension and the deposition rate of suspended sediment onto the bed. In the flux-based formulation, sediment transport is regarded to be in a local equilibrium state (i.e., sediment transport rate locally equals sediment transport capacity). However, the entrainment-based formulation does not require this constraint; the sediment transport rate may lag in space and time behind the changing flow conditions. In modeling the fine-grained Lower Yellow River, it is usual to treat sediment conservation in terms of an entrainment-based (nonequilibrium) rather than a flux-based (equilibrium) formulation with the consideration that fine-grained sediment may be entrained at one place but deposited only at some distant location downstream. However, the differences in prediction between the two formulations are still not well known, and the entrainment formulation may not always be necessary for the Lower Yellow River. Here we study this problem by comparing the results of flux-based and entrainment-based morphodynamics under conditions typical of the Yellow River, using sediment transport equations specifically designed for the Lower Yellow River. We find, somewhat unexpectedly, that in a treatment of a 200-km reach using uniform sediment, there is little difference between the two formulations unless the sediment fall velocity is arbitrarily greatly reduced. A consideration of sediment mixtures, however, shows that the two formulations give very different patterns of grain sorting. We explain this in terms of the structures of the two Exner equations for sediment mixtures, and define conditions for applicability of each formulation.

Non-hermitian quantum thermodynamics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gardas, Bartłomiej; Deffner, Sebastian; Saxena, Avadh

Thermodynamics is the phenomenological theory of heat and work. Here we analyze to what extent quantum thermodynamic relations are immune to the underlying mathematical formulation of quantum mechanics. As a main result, we show that the Jarzynski equality holds true for all non-hermitian quantum systems with real spectrum. This equality expresses the second law of thermodynamics for isothermal processes arbitrarily far from equilibrium. In the quasistatic limit however, the second law leads to the Carnot bound which is fulfilled even if some eigenenergies are complex provided they appear in conjugate pairs. Lastly, we propose two setups to test our predictions,more » namely with strongly interacting excitons and photons in a semiconductor microcavity and in the non-hermitian tight-binding model.« less

Non-hermitian quantum thermodynamics

DOE PAGES

Gardas, Bartłomiej; Deffner, Sebastian; Saxena, Avadh

2016-03-22

Thermodynamics is the phenomenological theory of heat and work. Here we analyze to what extent quantum thermodynamic relations are immune to the underlying mathematical formulation of quantum mechanics. As a main result, we show that the Jarzynski equality holds true for all non-hermitian quantum systems with real spectrum. This equality expresses the second law of thermodynamics for isothermal processes arbitrarily far from equilibrium. In the quasistatic limit however, the second law leads to the Carnot bound which is fulfilled even if some eigenenergies are complex provided they appear in conjugate pairs. Lastly, we propose two setups to test our predictions,more » namely with strongly interacting excitons and photons in a semiconductor microcavity and in the non-hermitian tight-binding model.« less

Particle swarm optimization-based local entropy weighted histogram equalization for infrared image enhancement

NASA Astrophysics Data System (ADS)

Wan, Minjie; Gu, Guohua; Qian, Weixian; Ren, Kan; Chen, Qian; Maldague, Xavier

2018-06-01

Infrared image enhancement plays a significant role in intelligent urban surveillance systems for smart city applications. Unlike existing methods only exaggerating the global contrast, we propose a particle swam optimization-based local entropy weighted histogram equalization which involves the enhancement of both local details and fore-and background contrast. First of all, a novel local entropy weighted histogram depicting the distribution of detail information is calculated based on a modified hyperbolic tangent function. Then, the histogram is divided into two parts via a threshold maximizing the inter-class variance in order to improve the contrasts of foreground and background, respectively. To avoid over-enhancement and noise amplification, double plateau thresholds of the presented histogram are formulated by means of particle swarm optimization algorithm. Lastly, each sub-image is equalized independently according to the constrained sub-local entropy weighted histogram. Comparative experiments implemented on real infrared images prove that our algorithm outperforms other state-of-the-art methods in terms of both visual and quantized evaluations.

Sharing Malaysian Experience in Participation of Girls in STEM Education. In-Progress Reflection No. 3 on "Current and Critical Issues in Curriculum and Learning"

ERIC Educational Resources Information Center

UNESCO International Bureau of Education, 2016

2016-01-01

The Malaysia government has placed STEM as a focus in developing the country towards achieving the status of a developed nation. The government acknowledges the role of women as equal partners in nation building. Thus, various policies ranging from economy, education, women's welfare, and human resources have been formulated through the years.…

Equilibria of the symmetric collinear restricted four-body problem with radiation pressure

NASA Astrophysics Data System (ADS)

Arribas, M.; Abad, A.; Elipe, A.; Palacios, M.

2016-02-01

In this paper, a restricted four-body problem with radiation pressure is considered. The three primaries are supposed in a collinear central configuration where both masses and both radiation forces of peripheral bodies are equal. After an adequate formulation, the problem is reduced to a tri-parametric one. A complete analysis of the position of equilibria and their stability in the space of parameters is performed.

A receptor-targeted nanocomplex vector system optimized for respiratory gene transfer.

PubMed

Tagalakis, Aristides D; McAnulty, Robin J; Devaney, James; Bottoms, Stephen E; Wong, John B; Elbs, Martin; Writer, Michele J; Hailes, Helen C; Tabor, Alethea B; O'Callaghan, Christopher; Jaffe, Adam; Hart, Stephen L

2008-05-01

Synthetic vectors for cystic fibrosis (CF) gene therapy are required that efficiently and safely transfect airway epithelial cells, rather than alveolar epithelial cells or macrophages, and that are nonimmunogenic, thus allowing for repeated delivery. We have compared several vector systems against these criteria including GL67, polyethylenimine (PEI) 22 and 25 kd and two new, synthetic vector formulations, comprising a cationic, receptor-targeting peptide K(16)GACSERSMNFCG (E), and the cationic liposomes (L) DHDTMA/DOPE or DOSEP3/DOPE. The lipid and peptide formulations self assemble into receptor-targeted nanocomplexes (RTNs) LED-1 and LED-2, respectively, on mixing with plasmid (D). LED-1 transfected airway epithelium efficiently, while LED-2 and GL67 preferentially transfected alveolar cells. PEI transfected airway epithelial cells with high efficiency, but was more toxic to the mice than the other formulations. On repeat dosing, LED-1 was equally as effective as the single dose, while GL67 was 30% less effective and PEI 22 kd displayed a 90% reduction of efficiency on repeated delivery. LED-1 thus was the only formulation that fulfilled the criteria for a CF gene therapy vector while GL67 and LED-2 may be appropriate for other respiratory diseases. Opportunities for PEI depend on a solution to its toxicity problems. LED-1 formulations were stable to nebulization, the most appropriate delivery method for CF.

PD-PK evaluation of freeze-dried atorvastatin calcium-loaded poly-ε-caprolactone nanoparticles.

PubMed

Ahmed, Iman S; El-Hosary, Rania; Shalaby, Samia; Abd-Rabo, Marwa M; Elkhateeb, Dalia G; Nour, Samia

2016-05-17

In this work lyophilized poly-ε-caprolactone nanoparticles (NPs) loaded with atorvastatin calcium (AC) were developed in an attempt to improve the in-vivo performance of AC following oral administration. The individual and combined effects of several formulation variables were previously investigated using step-wise full factorial designs in order to produce optimized AC-NPs with predetermined characteristics including particle size, drug loading capacity, drug release profile and physical stability. Four optimized formulations were further subjected in this work to lyophilization to promote their long-term physical stability and were fully characterized. The pharmacodynamics (PD)/pharmacokinetics (PK) properties of two optimized freeze-dried AC-NPs formulations showing acceptable long-term stability were determined and compared to a marketed AC immediate release tablet (Lipitor(®)) in albino rats. PD results revealed that the two tested formulations were equally effective in reducing low density lipoproteins (LDL) and triglycerides (TG) levels when given in reduced doses compared to Lipitor(®) and showed no adverse effects. PK results, on the other hand, revealed that the two freeze-dried AC-NPs formulations were of significantly lower bioavailability compared to Lipitor(®). Taken together the PD and PK results demonstrate that the improved efficacy obtained at reduced doses from the freeze-dried AC-NPs could be due to increased concentration of AC in the liver rather than in the plasma. Copyright © 2016 Elsevier B.V. All rights reserved.

GHS additivity formula: A true replacement method for acute systemic toxicity testing of agrochemical formulations.

PubMed

Corvaro, M; Gehen, S; Andrews, K; Chatfield, R; Arasti, C; Mehta, J

2016-12-01

Acute systemic (oral, dermal, inhalation) toxicity testing of agrochemical formulations (end-use products) is mainly needed for Classification and Labelling (C&L) and definition of personal protection equipment (PPE). A retrospective analysis of 225 formulations with available in vivo data showed that: A) LD 50 /LC 50 values were above limit doses in <20.2% via oral route but only in <1% and <2.4% of cases via dermal and inhalation route, respectively; B) for each formulation the acute oral toxicity is always equal or greater than the Acute Toxicity Estimate (ATE) via the other two routes; C) the GHS (Global Harmonised System) computational method based on ATE, currently of limited acceptance, has very high accuracy and specificity for prediction of agrochemical mixture toxicity according to the internationally established classification thresholds. By integrating this evidence, an exposure- and data-based waiving strategy is proposed to determine classification and adequate PPE and to ensure only triggered animal testing is used. Safety characterisation above 2000 mg/kg body weight or 1.0 mg/L air should not be recommended, based on the agrochemical exposure scenarios. The global implementation of these tools would allow a remarkable reduction (up to 95%) in in vivo testing, often inducing lethality and/or severe toxicity, for agrochemical formulations. Copyright © 2016. Published by Elsevier Inc.

Integrated stoichiometric, thermodynamic and kinetic modelling of steady state metabolism

PubMed Central

Fleming, R.M.T.; Thiele, I.; Provan, G.; Nasheuer, H.P.

2010-01-01

The quantitative analysis of biochemical reactions and metabolites is at frontier of biological sciences. The recent availability of high-throughput technology data sets in biology has paved the way for new modelling approaches at various levels of complexity including the metabolome of a cell or an organism. Understanding the metabolism of a single cell and multi-cell organism will provide the knowledge for the rational design of growth conditions to produce commercially valuable reagents in biotechnology. Here, we demonstrate how equations representing steady state mass conservation, energy conservation, the second law of thermodynamics, and reversible enzyme kinetics can be formulated as a single system of linear equalities and inequalities, in addition to linear equalities on exponential variables. Even though the feasible set is non-convex, the reformulation is exact and amenable to large-scale numerical analysis, a prerequisite for computationally feasible genome scale modelling. Integrating flux, concentration and kinetic variables in a unified constraint-based formulation is aimed at increasing the quantitative predictive capacity of flux balance analysis. Incorporation of experimental and theoretical bounds on thermodynamic and kinetic variables ensures that the predicted steady state fluxes are both thermodynamically and biochemically feasible. The resulting in silico predictions are tested against fluxomic data for central metabolism in E. coli and compare favourably with in silico prediction by flux balance analysis. PMID:20230840

Saturation Length of Erodible Sediment Beds Subject to Shear Flow

NASA Astrophysics Data System (ADS)

Casler, D. M.; Kahn, B. P.; Furbish, D. J.; Schmeeckle, M. W.

2016-12-01

We examine the initial growth and wavelength selection of sand ripples based on probabilistic formulations of the flux and the Exner equation. Current formulations of this problem as a linear stability analysis appeal to the idea of a saturation length-the lag between the bed stress and the flux-as a key stabilizing influence leading to selection of a finite wavelength. We present two contrasting formulations. The first is based on the Fokker-Planck approximation of the divergence form of the Exner equation, and thus involves particle diffusion associated with variations in particle activity, in addition to the conventionally assumed advective term. The role of a saturation length associated with the particle activity is similar to previous analyses. However, particle diffusion provides an attenuating influence on the growth of small wavelengths, independent of a saturation length, and is thus a sufficient, if not necessary, condition contributing to selection of a finite wavelength. The second formulation is based on the entrainment form of the Exner equation. As a precise, probabilistic formulation of conservation, this form of the Exner equation does not distinguish between advection and diffusion, and, because it directly accounts for all particle motions via a convolution of the distribution of particle hop distances, it pays no attention to the idea of a saturation length. The formulation and resulting description of initial ripple growth and wavelength selection thus inherently subsume the effects embodied in the ideas of advection, diffusion, and a saturation length as used in other formulations. Moreover, the formulation does not distinguish between bed load and suspended load, and is thus broader in application. The analysis reveals that the length scales defined by the distribution of hop distances are more fundamental than the saturation length in determining the initial growth or decay of bedforms. Formulations involving the saturation length coincide with the special case of an exponential distribution of hop distance, where the saturation length is equal to the mean hop distance.

Numerical simulation on dimension decrease for annular casing of one centrifugal boiler circulation pump

NASA Astrophysics Data System (ADS)

Fan, Y. Z.; Zuo, Z. G.; Liu, S. H.; Wu, Y. L.; Sha, Y. J.

2012-11-01

Primary formulation derivation indicates that the dimension of one existing centrifugal boiler circulation pump casing is too large. As great manufacture cost can be saved by dimension decrease, a numerical simulation research is developed in this paper on dimension decrease for annular casing of this pump with a specific speed equaling to 189, which aims at finding an appropriately smaller dimension of the casing while hydraulic performance and strength performance will hardly be changed according to the requirements of the cooperative company. The research object is one existing centrifugal pump with a diffuser and a semi-spherical annular casing, working as the boiler circulation pump for (ultra) supercritical units in power plants. Dimension decrease, the modification method, is achieved by decreasing the existing casing's internal radius (marked as "Ri0") while keeping the wall thickness. The research analysis is based on primary formulation derivation, CFD (Computational Fluid Dynamics) simulation and FEM (Finite Element Method) simulation. Primary formulation derivation estimates that a design casing's internal radius should be less than 0.75 Ri0. CFD analysis indicates that smaller casing with 0.75 Ri0 has a worse hydraulic performance when working at large flow rates and a better hydraulic performance when working at small flow rates. In consideration of hydraulic performance and dimension decrease, an appropriate casing's internal radius is determined, which equals to 0.875 Ri0. FEM analysis then confirms that modified pump casing has nearly the same strength performance as the existing pump casing. It is concluded that dimension decrease can be an economical method as well as a practical method for large pumps in engineering fields.

Field theoretical prediction of a property of the tropical cyclone

NASA Astrophysics Data System (ADS)

Spineanu, F.; Vlad, M.

2014-01-01

The large scale atmospheric vortices (tropical cyclones, tornadoes) are complex physical systems combining thermodynamics and fluid-mechanical processes. The late phase of the evolution towards stationarity consists of the vorticity concentration, a well known tendency to self-organization , an universal property of the two-dimensional fluids. It may then be expected that the stationary state of the tropical cyclone has the same nature as the vortices of many other systems in nature: ideal (Euler) fluids, superconductors, Bose-Einsetin condensate, cosmic strings, etc. Indeed it was found that there is a description of the atmospheric vortex in terms of a classical field theory. It is compatible with the more conventional treatment based on conservation laws, but the field theoretical model reveals properties that are almost inaccessible to the conventional formulation: it identifies the stationary states as being close to self-duality. This is of highest importance: the self-duality is known to be the origin of all coherent structures known in natural systems. Therefore the field theoretical (FT) formulation finds that the cuasi-coherent form of the atmospheric vortex (tropical cyclone) at stationarity is an expression of this particular property. In the present work we examine a strong property of the tropical cyclone, which arises in the FT formulation in a natural way: the equality of the masses of the particles associated to the matter field and respectively to the gauge field in the FT model is translated into the equality between the maximum radial extension of the tropical cyclone and the Rossby radius. For the cases where the FT model is a good approximation we calculate characteristic quantities of the tropical cyclone and find good comparison with observational data.

Prediction and assessment of flammability hazards associated with metered-dose inhalers containing flammable propellants.

PubMed

Dalby, R N

1992-05-01

Several potential replacements for chlorofluorocarbons (CFCs) in metered-dose inhalers (MDIs) are flammable. The flammability hazard associated with their use was assessed using a range of MDIs containing 0-100% (w/w) n-butane (flammable) in HFC-134a (non-flammable) fitted with either 25-, 63-, or 100-microliters metering valves or continuous valves. In flame projection tests each MDI was fired horizontally into a flame, and the ignited flume length emitted from the MDI was measured. Flame projections of greater than or equal to 60 cm were produced by all formulations fitted with continuous valves which contained greater than or equal to 40% (w/w) n-butane in HFC-134a. Using metering valves the maximum flame projection obtained was 30 cm. This was observed with a formulation containing 90% (w/w) n-butane in HFC-134a and a 100-microliters valve. For a particular formulation, smaller metering valves produced shorter flame projections. Because many MDIs are used in conjunction with extension devices, the likelihood of accidental propellant vapor ignition was determined in Nebuhaler and Inspirease reservoirs and a Breathancer spacer. Ignition was predictable based on propellant composition, metered volume, number of actuations, and spacer capacity. Calculated n-butane concentrations in excess of the lower flammability limit [LFL; 1.9% (v/v)] but below the upper flammability limit [UFL; 8.5% (v/v)] were usually predictive of flammability following ignition by a glowing nichrome wire mounted inside the extension device. No ignition was predicted or observed following one or two 25-microliters actuations of 100% n-butane into large volume Nebuhaler (750 ml) or Inspirease (660 ml) devices.(ABSTRACT TRUNCATED AT 250 WORDS)

Toward the development of a stable, freeze-dried formulation of Helicobacter pylori killed whole cell vaccine adjuvanted with a novel mutant of E. coli heat-labile toxin

PubMed Central

Summerton, Nancy A.; Welch, Richard W.; Bondoc, Laureano; Yang, Huei-Hsiung; Pleune, Brett; Ramachandran, Naryaswamy; Harris, Andrea M.; Bland, Desiree; Jackson, W. James; Park, Sukjoon; Clements, John D.; Nabors, Gary S.

2009-01-01

No vaccine exists for the prevention of infection with the ubiquitous gastric pathogen Helicobacter pylori, and drug therapy for the infection is complicated by poor patient compliance, the high cost of treatment, and ineffectiveness against drug resistant strains. A new medical advancement is required to reduce the incidence of peptic ulcer disease and stomach cancer, two conditions caused by infection with H. pylori. Clinical trials have been performed with a formalin-inactivated Helicobacter pylori Whole Cell (HWC) vaccine, given orally in combination with the mucosal adjuvant mLT(R192G), a mutant of E. coli heat-labile toxin. Following the initial dose of this vaccine, some subjects experienced gastrointestinal side effects. To reduce side effects and potentially further increase the amount of adjuvant that can safely be administered with the HWC vaccine, experiments were performed with a form of LT that carried two mutations in the A subunit, a substitution of G for R at position 192, and A for L at position 211. The double-mutant LT (dmLT) adjuvant stimulated immune responses as effectively as the single mutant LT in mice. Additionally, following a challenge infection, the dmLT-adjuvanted vaccine was as effective as single mutant LT in reducing gastric urease levels (diagnostic for H. pylori infection), and H. pylori colonization in the stomach as assessed by quantitative analysis of stomach homogenates. A lyophilized formulation of HWC was developed to improve stability and to potentially reduce reliance on cold chain maintenance. It was observed that a dmLT-adjuvanted lyophilized vaccine was equally as protective in the mouse model as the liquid formulation as assessed by gastric urease analysis and analysis of stomach homogenates for viable H. pylori. No readily detectable effect of tonicity or moisture content was observed for the lyophilized vaccine within the formulation limits evaluated. In an accelerated stability study performed at 37°C the lyophilized vaccine remained equally as protective as vaccine stored at 2–8°C. The formulation selected for clinical development consisted of 2.5×1010 formalin-inactivated cells per ml in 6.5% trehalose, 0.5% mannitol, and 10 mM citrate buffer at pH 6.8. PMID:19897067

Formulation study of topically applied lotion: in vitro and in vivo evaluation.

PubMed

Hussain Shah, Syed Nisar; Hussain, Talib; Ullah Khan, Ikram; Asghar, Sajid; Shahzad, Yasser

2013-01-01

This article presents the development and evaluation of a new topical formulation of diclofenac diethylamine (DDA) as a locally applied analgesic lotion. To this end, the lotion formulations were formulated with equal volume of varying concentrations (1%, 2%, 3%, 4%; v/v) of permeation enhancers, namely propylene glycol (PG) and turpentine oil (TO). These lotions were subjected to physical studies (pH, viscosity, spreadability, homogeneity, and accelerated stability), in vitro permeation, in vivo animal studies and sensatory perception testing. In vitro permeation of DDA from lotion formulations was evaluated across polydimethylsiloxane membrane and rabbit skin using Franz cells. It was found that PG and TO content influenced the permeation of DDA across model membranes with the lotion containing 4% v/v PG and TO content showed maximum permeation enhancement of DDA. The flux values for L4 were 1.20±0.02 μg.cm(-2).min(-1) and 0.67 ± 0.02 μg.cm(-2).min(-1) for polydimethylsiloxane and rabbit skin, respectively. Flux values were significantly different (p < 0.05) from that of the control. The flux enhancement ratio of DDA from L4 was 31.6-fold and 4.8-fold for polydimethylsiloxane and rabbit skin, respectively. In the in vivo animal testing, lotion with 4% v/v enhancer content showed maximum anti-inflammatory and analgesic effect without inducing any irritation. Sensatory perception tests involving healthy volunteers rated the formulations between 3 and 4 (values ranging between -4 to +4, indicating a range of very bad to excellent, respectively). It was concluded that the DDA lotion containing 4% v/v PG and TO exhibit the best performance overall and that this specific formulation should be the basis for further clinical investigations.

Formulation Study of Topically Applied Lotion: In Vitro and In Vivo Evaluation

PubMed Central

Hussain Shah, Syed Nisar; Hussain, Talib; Ullah Khan, Ikram; Asghar, Sajid; Shahzad, Yasser

2013-01-01

Introduction This article presents the development and evaluation of a new topical formulation of diclofenac diethylamine (DDA) as a locally applied analgesic lotion. Methods To this end, the lotion formulations were formulated with equal volume of varying concentrations (1%, 2%, 3%, 4%; v/v) of permeation enhancers, namely propylene glycol (PG) and turpentine oil (TO). These lotions were subjected to physical studies (pH, viscosity, spreadability, homogeneity, and accelerated stability), in vitro permeation, in vivo animal studies and sensatory perception testing. In vitro permeation of DDA from lotion formulations was evaluated across polydimethylsiloxane membrane and rabbit skin using Franz cells. Results It was found that PG and TO content influenced the permeation of DDA across model membranes with the lotion containing 4% v/v PG and TO content showed maximum permeation enhancement of DDA. The flux values for L4 were 1.20±0.02 μg.cm-2.min-1 and 0.67 ± 0.02 μg.cm-2.min-1 for polydimethylsiloxane and rabbit skin, respectively. Flux values were significantly different (p < 0.05) from that of the control. The flux enhancement ratio of DDA from L4 was 31.6-fold and 4.8-fold for polydimethylsiloxane and rabbit skin, respectively. In the in vivo animal testing, lotion with 4% v/v enhancer content showed maximum anti-inflammatory and analgesic effect without inducing any irritation. Sensatory perception tests involving healthy volunteers rated the formulations between 3 and 4 (values ranging between -4 to +4, indicating a range of very bad to excellent, respectively). Conclusion It was concluded that the DDA lotion containing 4% v/v PG and TO exhibit the best performance overall and that this specific formulation should be the basis for further clinical investigations. PMID:23678465

Reformulation and solution of the master equation for multiple-well chemical reactions.

PubMed

Georgievskii, Yuri; Miller, James A; Burke, Michael P; Klippenstein, Stephen J

2013-11-21

We consider an alternative formulation of the master equation for complex-forming chemical reactions with multiple wells and bimolecular products. Within this formulation the dynamical phase space consists of only the microscopic populations of the various isomers making up the reactive complex, while the bimolecular reactants and products are treated equally as sources and sinks. This reformulation yields compact expressions for the phenomenological rate coefficients describing all chemical processes, i.e., internal isomerization reactions, bimolecular-to-bimolecular reactions, isomer-to-bimolecular reactions, and bimolecular-to-isomer reactions. The applicability of the detailed balance condition is discussed and confirmed. We also consider the situation where some of the chemical eigenvalues approach the energy relaxation time scale and show how to modify the phenomenological rate coefficients so that they retain their validity.

A reduced-order integral formulation to account for the finite size effect of isotropic square panels using the transfer matrix method.

PubMed

Bonfiglio, Paolo; Pompoli, Francesco; Lionti, Riccardo

2016-04-01

The transfer matrix method is a well-established prediction tool for the simulation of sound transmission loss and the sound absorption coefficient of flat multilayer systems. Much research has been dedicated to enhancing the accuracy of the method by introducing a finite size effect of the structure to be simulated. The aim of this paper is to present a reduced-order integral formulation to predict radiation efficiency and radiation impedance for a panel with equal lateral dimensions. The results are presented and discussed for different materials in terms of radiation efficiency, sound transmission loss, and the sound absorption coefficient. Finally, the application of the proposed methodology for rectangular multilayer systems is also investigated and validated against experimental data.

Common tea formulations modulate in vitro digestive recovery of green tea catechins.

PubMed

Green, Rodney J; Murphy, Angus S; Schulz, Burkhard; Watkins, Bruce A; Ferruzzi, Mario G

2007-09-01

Epidemiological evidence suggests a role for tea catechins in reduction of chronic disease risk. However, stability of catechins under digestive conditions is poorly understood. The objective of this study was to characterize the effect of common food additives on digestive recovery of tea catechins. Green tea water extracts were formulated in beverages providing 4.5, 18, 23, and 3.5 mg per 100 mL epicatechin (EC), epigallocatechin (EGC), epigallocatechin-gallate (EGCG), and epicatechin-gallate (ECG), respectively. Common commercial beverage additives; citric acid (CA), BHT, EDTA, ascorbic acid (AA), milk (bovine, soy, and rice), and citrus juice (orange, grapefruit, lemon, and lime) were formulated into finished tea beverages at incremental dosages. Samples were then subjected to in vitro digestion simulating gastric and small intestinal conditions with pre- and post-digestion catechin profiles assessed by HPLC. Catechin stability in green tea was poor with <20% total catechins remaining post-digestion. EGC and EGCG were most sensitive with less, not double equals 10% recovery. Teas formulated with 50% bovine, soy, and rice milk increased total catechin recovery significantly to 52, 55, and 69% respectively. Including 30 mg AA in 250 mL of tea beverage significantly (p<0.05) increased catechin recovery of EGC, EGCG, EC, and ECG to 74, 54, 82, and 45% respectively. Juice preparation resulted in the highest recovery of any formulation for EGC (81-98%), EGCG (56-76%), EC (86-95%), and ECG (30-55%). These data provide evidence that tea consumption practices and formulation factors likely impact catechin digestive recovery and may result in diverse physiological profiles.

Automatic Bayes Factors for Testing Equality- and Inequality-Constrained Hypotheses on Variances.

PubMed

Böing-Messing, Florian; Mulder, Joris

2018-05-03

In comparing characteristics of independent populations, researchers frequently expect a certain structure of the population variances. These expectations can be formulated as hypotheses with equality and/or inequality constraints on the variances. In this article, we consider the Bayes factor for testing such (in)equality-constrained hypotheses on variances. Application of Bayes factors requires specification of a prior under every hypothesis to be tested. However, specifying subjective priors for variances based on prior information is a difficult task. We therefore consider so-called automatic or default Bayes factors. These methods avoid the need for the user to specify priors by using information from the sample data. We present three automatic Bayes factors for testing variances. The first is a Bayes factor with equal priors on all variances, where the priors are specified automatically using a small share of the information in the sample data. The second is the fractional Bayes factor, where a fraction of the likelihood is used for automatic prior specification. The third is an adjustment of the fractional Bayes factor such that the parsimony of inequality-constrained hypotheses is properly taken into account. The Bayes factors are evaluated by investigating different properties such as information consistency and large sample consistency. Based on this evaluation, it is concluded that the adjusted fractional Bayes factor is generally recommendable for testing equality- and inequality-constrained hypotheses on variances.

Validation and Application of Pharmacokinetic Models for Interspecies Extrapolations in Toxicity Risk Assessments of Volatile Organics

DTIC Science & Technology

1989-07-21

formulation of physiologically-based pharmacokinetic models. Adult male Sprague-Dawley rats and male beagle dogs will be administered equal doses...experiments in the 0 dog . Physiologically-based pharmacokinetic models will be developed and validated for oral and inhalation exposures to halocarbons...of conducting experiments in dogs . The original physiolo ic model for the rat will be scaled up to predict halocarbon pharmacokinetics in the dog . The

Effects of reaction pH on properties and performance of urea-formaldehyde resins

Treesearch

Chung-Yun Hse; Zhi-Yuan Xia; Bunchiro Tomita

1994-01-01

Urea formaldehyde resins were formulated with combination variables of three reaction pH (1.0, 4.8, and 8.0) and four molar ratios of formaldehyde to urea (2.5, 3.0, 3.5, and 4.0). The resins were prepared by placing all formaldehyde and water in reaction kettle and pH was adjusted with sulfuric acid and sodium hydroxide, respectively. Urea was added in 15 equal parts...

Compact, Isolating Elastomeric Suspension for Vehicle Acoustic Vector Sensor

DTIC Science & Technology

2007-09-30

well as underwater acoustics. His Master’s thesis, funded by NUSC, was a study of near-body acoustic signal behavior entitled “Some Characteristics of ...in non-polymer based composites, including cermets . He has formulated a very wide range of materials for an equally wide range of applications, and...with a moving vehicle of an instrument responsive to particle accelerations in the surrounding medium. The overall goal of this project is to develop

Environmentally compatible solid rocket propellants

NASA Technical Reports Server (NTRS)

Jacox, James L.; Bradford, Daniel J.

1995-01-01

Hercules' clean propellant development research is exploring three major types of clean propellant: (1) chloride-free formulations (no chlorine containing ingredients), being developed on the Clean Propellant Development and Demonstration (CPDD) contract sponsored by Phillips Laboratory, Edwards Air Force Base, CA; (2) low HCl scavenged formulations (HCl-scavenger added to propellant oxidized with ammonium perchlorate (AP)); and (3) low HCl formulations oxidized with a combination of AN and AP (with or without an HCl scavenger) to provide a significant reduction (relative to current solid rocket boosters) in exhaust HCl. These propellants provide performance approaching that of current systems, with less than 2 percent HCl in the exhaust, a significant reduction (greater than or equal to 70 percent) in exhaust HCl levels. Excellent processing, safety, and mechanical properties were achieved using only readily available, low cost ingredients. Two formulations, a sodium nitrate (NaNO3) scavenged HTPB and a chloride-free hydroxy terminated polyether (HTPE) propellant, were characterized for ballistic, mechanical, and rheological properties. In addition, the hazards properties were demonstrated to provide two families of class 1.3, 'zero-card' propellants. Further characterization is planned which includes demonstration of ballistic tailorability in subscale (one to 70 pound) motors over the range of burn rates required for retrofit into current Hercules space booster designs (Titan 4 SRMU and Delta 2 GEM).

Investigation into process-induced de-aggregation of cohesive micronised API particles.

PubMed

Hoffmann, Magnus; Wray, Patrick S; Gamble, John F; Tobyn, Mike

2015-09-30

The aim of this study was to assess the impact of unit processes on the de-aggregation of a cohesive micronised API within a pharmaceutical formulation using near-infrared chemical imaging. The impact on the primary API particles was also investigated using an image-based particle characterization system with integrated Raman analysis. The blended material was shown to contain large, API rich domains which were distributed in-homogeneously across the sample, suggesting that the blending process was not aggressive enough to disperse aggregates of micronised drug particles. Cone milling, routinely used to improve the homogeneity of such cohesive formulations, was observed to substantially reduce the number and size of API rich domains; however, several smaller API domains survived the milling process. Conveyance of the cone milled formulation through the Alexanderwerk WP120 powder feed system completely dispersed all remaining aggregates. Importantly, powder feed transmission of the un-milled formulation was observed to produce an equally homogeneous API distribution. The size of the micronised primary drug particles remained unchanged during powder feed transmission. These findings provide further evidence that this powder feed system does induce shear, and is in fact better able to disperse aggregates of a cohesive micronised API within a blend than the blend-mill-blend step. Crown Copyright © 2015. Published by Elsevier B.V. All rights reserved.

Nonrecursive formulations of multibody dynamics and concurrent multiprocessing

NASA Technical Reports Server (NTRS)

Kurdila, Andrew J.; Menon, Ramesh

1993-01-01

Since the late 1980's, research in recursive formulations of multibody dynamics has flourished. Historically, much of this research can be traced to applications of low dimensionality in mechanism and vehicle dynamics. Indeed, there is little doubt that recursive order N methods are the method of choice for this class of systems. This approach has the advantage that a minimal number of coordinates are utilized, parallelism can be induced for certain system topologies, and the method is of order N computational cost for systems of N rigid bodies. Despite the fact that many authors have dismissed redundant coordinate formulations as being of order N(exp 3), and hence less attractive than recursive formulations, we present recent research that demonstrates that at least three distinct classes of redundant, nonrecursive multibody formulations consistently achieve order N computational cost for systems of rigid and/or flexible bodies. These formulations are as follows: (1) the preconditioned range space formulation; (2) penalty methods; and (3) augmented Lagrangian methods for nonlinear multibody dynamics. The first method can be traced to its foundation in equality constrained quadratic optimization, while the last two methods have been studied extensively in the context of coercive variational boundary value problems in computational mechanics. Until recently, however, they have not been investigated in the context of multibody simulation, and present theoretical questions unique to nonlinear dynamics. All of these nonrecursive methods have additional advantages with respect to recursive order N methods: (1) the formalisms retain the highly desirable order N computational cost; (2) the techniques are amenable to concurrent simulation strategies; (3) the approaches do not depend upon system topology to induce concurrency; and (4) the methods can be derived to balance the computational load automatically on concurrent multiprocessors. In addition to the presentation of the fundamental formulations, this paper presents new theoretical results regarding the rate of convergence of order N constraint stabilization schemes associated with the newly introduced class of methods.

Universality of the logarithmic velocity profile restored

NASA Astrophysics Data System (ADS)

Luchini, Paolo

2017-11-01

The logarithmic velocity profile of wall-bounded turbulent flow, despite its widespread adoption in research and in teaching, exhibits discrepancies with both experiments and numerical simulations that have been repeatedly observed in the literature; serious doubts ensued about its precise form and universality, leading to the formulation of alternate theories and hindering ongoing experimental efforts to measure von Kármán's constant. By comparing different geometries of pipe, plane-channel and plane-Couette flow, here we show that such discrepancies can be physically interpreted, and analytically accounted for, through an equally universal higher-order correction caused by the pressure gradient. Inclusion of this term produces a tenfold increase in the adherence of the predicted profile to existing experiments and numerical simulations in all three geometries. Universality of the logarithmic law then emerges beyond doubt and a satisfactorily simple formulation is established. Among the consequences of this formulation is a strongly increased confidence that the Reynolds number of present-day direct numerical simulations is actually high enough to uncover asymptotic behaviour, but research efforts are still needed in order to increase their accuracy.

Mapping proteins in the presence of paralogs using units of coevolution

PubMed Central

2013-01-01

Background We study the problem of mapping proteins between two protein families in the presence of paralogs. This problem occurs as a difficult subproblem in coevolution-based computational approaches for protein-protein interaction prediction. Results Similar to prior approaches, our method is based on the idea that coevolution implies equal rates of sequence evolution among the interacting proteins, and we provide a first attempt to quantify this notion in a formal statistical manner. We call the units that are central to this quantification scheme the units of coevolution. A unit consists of two mapped protein pairs and its score quantifies the coevolution of the pairs. This quantification allows us to provide a maximum likelihood formulation of the paralog mapping problem and to cast it into a binary quadratic programming formulation. Conclusion CUPID, our software tool based on a Lagrangian relaxation of this formulation, makes it, for the first time, possible to compute state-of-the-art quality pairings in a few minutes of runtime. In summary, we suggest a novel alternative to the earlier available approaches, which is statistically sound and computationally feasible. PMID:24564758

Performance of mixed formulations for the particle finite element method in soil mechanics problems

NASA Astrophysics Data System (ADS)

Monforte, Lluís; Carbonell, Josep Maria; Arroyo, Marcos; Gens, Antonio

2017-07-01

This paper presents a computational framework for the numerical analysis of fluid-saturated porous media at large strains. The proposal relies, on one hand, on the particle finite element method (PFEM), known for its capability to tackle large deformations and rapid changing boundaries, and, on the other hand, on constitutive descriptions well established in current geotechnical analyses (Darcy's law; Modified Cam Clay; Houlsby hyperelasticity). An important feature of this kind of problem is that incompressibility may arise either from undrained conditions or as a consequence of material behaviour; incompressibility may lead to volumetric locking of the low-order elements that are typically used in PFEM. In this work, two different three-field mixed formulations for the coupled hydromechanical problem are presented, in which either the effective pressure or the Jacobian are considered as nodal variables, in addition to the solid skeleton displacement and water pressure. Additionally, several mixed formulations are described for the simplified single-phase problem due to its formal similitude to the poromechanical case and its relevance in geotechnics, since it may approximate the saturated soil behaviour under undrained conditions. In order to use equal-order interpolants in displacements and scalar fields, stabilization techniques are used in the mass conservation equation of the biphasic medium and in the rest of scalar equations. Finally, all mixed formulations are assessed in some benchmark problems and their performances are compared. It is found that mixed formulations that have the Jacobian as a nodal variable perform better.

Comparative efficacy of IR3535 and deet as repellents against adult Aedes aegypti and Culex quinquefasciatus.

PubMed

Cilek, J E; Petersen, J L; Hallmon, C E

2004-09-01

Arm-in-cage laboratory evaluations of 2 proprietary formulations of the mosquito repellents IR3535 and N,N-diethyl-3-methylbenzamide (deet; aqueous cream, hydroalcoholic spray) were made with 10 and 20% concentrations of each repellent. Also, 4 commercially available products containing IR3535 (Expedition insect repellent 20.07% active ingredient [AI], Bug Guard Plus with SPF30 sunscreen 7.5% AI, Bug Guard Plus with SPF15 sunscreen 7.5% AI, and Bug Guard Plus 7.5% AI) were tested. All comparisons were made on an equal formulation or concentration basis. Eight volunteers tested all formulations or products 3 times against laboratory-reared, Aedes aegypti and Culex quinquefasciatus mosquitoes (6-10 days old). Products were applied to a forearm at the rate of 0.002 g/cm2. The other forearm was not treated and served as a control. Elapsed time to 1st and 2nd consecutive bite was recorded. Mean protection time (i.e., time to 1st bite) with proprietary formulations of IR3535 were comparable to those of deet, with 20% concentrations providing greater protection against Ae. aegypti (3 h) and Cx. quinquefasciatus (6 h). Mean protection time for commercial products containing IR3535 ranged from nearly 90 to 170 min for Ae. aegypti and 3.5 to 6.5 h for Cx. quinquefasciatus. Mean time to the 2nd bite was similar to time to 1st bite for each mosquito species, product, and formulation.

A Comparison between Use of Spray and Freeze Drying Techniques for Preparation of Solid Self-Microemulsifying Formulation of Valsartan and In Vitro and In Vivo Evaluation

PubMed Central

Singh, Sanjay Kumar; Vuddanda, Parameswara Rao; Singh, Sanjay; Srivastava, Anand Kumar

2013-01-01

The objective of the present study was to develop self micro emulsifying formulation (SMEF) of valsartan to improve its oral bioavailability. The formulations were screened on the basis of solubility, stability, emulsification efficiency, particle size and zeta potential. The optimized liquid SMEF contains valsartan (20% w/w), Capmul MCM C8 (16% w/w), Tween 80 (42.66% w/w) and PEG 400 (21.33% w/w) as drug, oil, surfactant and co-surfactant, respectively. Further, Liquid SMEF was adsorbed on Aerosol 200 by spray and freeze drying methods in the ratio of 2 : 1 and transformed into free flowing powder. Both the optimized liquid and solid SMEF had the particle size <200 nm with rapid reconstitution properties. Both drying methods are equally capable for producing stable solid SMEF and immediate release of drug in in vitro and in vivo conditions. However, the solid SMEF produced by spray drying method showed high flowability and compressibility. The solid state characterization employing the FTIR, DSC and XRD studies indicated insignificant interaction of drug with lipid and adsorbed excipient. The relative bioavailability of solid SMEF was approximately 1.5 to 3.0 folds higher than marketed formulation and pure drug. Thus, the developed solid SMEF illustrates an alternative delivery of valsartan as compared to existing formulations with improved bioavailability. PMID:23971048

Wave theory of turbulence in compressible media (acoustic theory of turbulence)

NASA Technical Reports Server (NTRS)

Kentzer, C. P.

1975-01-01

The generation and the transmission of sound in turbulent flows are treated as one of the several aspects of wave propagation in turbulence. Fluid fluctuations are decomposed into orthogonal Fourier components, with five interacting modes of wave propagation: two vorticity modes, one entropy mode, and two acoustic modes. Wave interactions, governed by the inhomogeneous and nonlinear terms of the perturbed Navier-Stokes equations, are modeled by random functions which give the rates of change of wave amplitudes equal to the averaged interaction terms. The statistical framework adopted is a quantum-like formulation in terms of complex distribution functions. The spatial probability distributions are given by the squares of the absolute values of the complex characteristic functions. This formulation results in nonlinear diffusion-type transport equations for the probability densities of the five modes of wave propagation.

Rethinking maternal-fetal conflict: gender and equality in perinatal ethics.

PubMed

Harris, L H

2000-11-01

Practitioners who care for pregnant women face dilemmas when their patients use illicit drugs, reject medical recommendations, or cause fetal harm. Many ethics scholars characterize those situations as maternal-fetal conflicts. In conflict-based models, maternal rights are considered to conflict with fetal rights, or moral obligations owed to pregnant women are considered to conflict with those owed to their fetuses. I offer an alternative model of pregnancy ethics by applying relational and equality-based moral theories to situations of fetal harm by pregnant women. In this model, clinicians faced with ethical dilemmas should attempt to understand pregnant women and their decisions within their broad social networks and communities, ask how the clinician's personal standpoint influences outcomes judged to be ethical, and determine whether the clinician's ethical formulations reduce or enhance existing gender, class, or racial inequality. This model focuses on the mutual needs of pregnant women and fetuses rather than on their mutually exclusive needs. It also avoids many pitfalls of traditional ethical formulations, specifically their tendency to neglect gender-specific modes of moral reasoning, their implicit assumptions that application of universal principles like autonomy and beneficence results in objective ethical solutions, and their failure to account for the ways that projecting fetal needs perpetuates social inequalities. This model provides the ethical foundations for moving law and policy away from criminalization and toward prevention of prenatal harm.

Does Bohm's Quantum Force Have a Classical Origin?

NASA Astrophysics Data System (ADS)

Lush, David C.

2016-08-01

In the de Broglie-Bohm formulation of quantum mechanics, the electron is stationary in the ground state of hydrogenic atoms, because the quantum force exactly cancels the Coulomb attraction of the electron to the nucleus. In this paper it is shown that classical electrodynamics similarly predicts the Coulomb force can be effectively canceled by part of the magnetic force that occurs between two similar particles each consisting of a point charge moving with circulatory motion at the speed of light. Supposition of such motion is the basis of the Zitterbewegung interpretation of quantum mechanics. The magnetic force between two luminally-circulating charges for separation large compared to their circulatory motions contains a radial inverse square law part with magnitude equal to the Coulomb force, sinusoidally modulated by the phase difference between the circulatory motions. When the particles have equal mass and their circulatory motions are aligned but out of phase, part of the magnetic force is equal but opposite the Coulomb force. This raises a possibility that the quantum force of Bohmian mechanics may be attributable to the magnetic force of classical electrodynamics. It is further shown that relative motion between the particles leads to modulation of the magnetic force with spatial period equal to the de Broglie wavelength.

Anti-botulism single-shot vaccine using chitosan for protein encapsulation by simple coacervation.

PubMed

Sari, Roger S; de Almeida, Anna Christina; Cangussu, Alex S R; Jorge, Edson V; Mozzer, Otto D; Santos, Hércules Otacílio; Quintilio, Wagner; Brandi, Igor Viana; Andrade, Viviane Aguiar; Miguel, Angelo Samir M; Sobrinho Santos, Eliane M

2016-12-01

The aim of the present study was to compare the potency and safety of vaccines against Clostridium botulinum (C. botulinum) type C and D formulated with chitosan as controlled release matrix and vaccines formulated in conventional manner using aluminum hydroxide. Parameters were established for the development of chitosan microspheres, using simple coacervation to standardize the use of this polymer in protein encapsulation for vaccine formulation. To formulate a single shot vaccine inactivated antigens of C. botulinum type C and D were used with original toxin titles equal to 5.2 and 6.2 log LD50/ml, respectively. For each antigen a chitosan based solution of 50 mL was prepared. Control vaccines were formulated by mixing toxoid type C and D with aluminum hydroxide [25% Al(OH) 3 , pH 6.3]. The toxoid sterility, innocuity and potency of vaccines were evaluated as stipulated by MAPA-BRASIL according to ministerial directive no. 23. Encapsulation efficiency of BSA in chitosan was 32.5-40.37%, while that the encapsulation efficiency to toxoid type C was 41,03% (1.94 mg/mL) and of the toxoid type D was 32.30% (1.82 mg/mL). The single shot vaccine formulated using chitosan for protein encapsulation through simple coacervation showed potency and safety similar to conventional vaccine currently used in Brazilian livestock (10 and 2 IU/mL against C. botulinum type C and D, respectively). The present work suggests that our single shot vaccine would be a good option as a cattle vaccine against these C. botulinum type C and D. Copyright © 2016 Elsevier Ltd. All rights reserved.

Generic products of antiepileptic drugs: a perspective on bioequivalence, bioavailability, and formulation switches using Monte Carlo simulations.

PubMed

Karalis, Vangelis; Macheras, Panos; Bialer, Meir

2014-01-01

Generic products of antiepileptic drugs (AEDs) are currently a controversial topic as neurologists and patients are reluctant to switch from brand products to generics and to switch between generics. The aim of this study was to provide enlightenment on issues of bioequivalence (BE) and interchangeability of AED products. Monte Carlo simulations of the classic 2 × 2 BE studies were performed to study the effect of sample size, within-subject variability, and the true difference in pharmacokinetic values of the products under comparison on BE acceptance of generic AED products. Simulations were extended to study the comparative performance of two generic AED products against the same innovative product. The simulated results are compared with literature data on AEDs. The question with regard to bioavailability (BA) is whether two formulations are different, while for BE the question is whether two formulations are sufficiently similar in terms of extent and rate of absorption. Therefore, the criteria for BA and BE and the statistical analysis involved in their analysis are different. Two generic formulations that meet regulatory approval requirements for generics by being bioequivalent to the same innovative AED may not be bioequivalent to one another and therefore should not be regarded as equal or as therapeutically equivalent products. A switch from a standard or an immediate-release formulation to a modified-release product, which comprises extended-release or delayed-release formulations, should not be regarded as a switch between generics, but rather as a switch between different formulation types. Switches between bioequivalent generic AED products could potentially lead to larger changes in plasma levels and exposure than the brand-to-generic switch. The simulation work verified the clinical findings that not all generic AED products bioequivalent to the same innovative product are bioequivalent to one another. Two generic formulations that meet regulatory approval requirements for generics, by being bioequivalent to the innovative AED, may not be bioequivalent to one another. Additional BE criteria are needed for a formulation switch, particularly in epilepsy, where a breakthrough seizure may change a patient's status from seizure-free to refractory.

Plasma pharmacokinetics, faecal excretion and efficacy of pyrantel pamoate paste and granule formulations following per os administration in donkeys naturally infected with intestinal strongylidae.

PubMed

Gokbulut, Cengiz; Aksit, Dilek; Smaldone, Giorgio; Mariani, Ugo; Veneziano, Vincenzo

2014-09-15

The plasma disposition, faecal excretion and efficacy of two formulations of pyrantel pamoate in donkeys were examined in a controlled trial. Three groups of seven donkeys received either no medication (control) or pyrantel paste or granule formulations at horse dosage of 20mg/kg B.W. (equals 6.94 mg/kg PYR base) of body weight. Heparinized blood and faecal samples were collected at various times between 1 and 144 h after treatment. The samples were analysed by high-performance liquid chromatography. The last detectable plasma concentration (tmax) of paste formulation was significantly earlier (36.00 h) compared with granule formulation (46.29 h). Although, there was no significant difference on terminal half lives (t1/2: 12.39 h vs. 14.86 h), tmax (14.86 h vs. 14.00) and MRT (24.80 h vs. 25.44 h) values; the Cmax (0.09 μg/ml) AUC (2.65 μgh/ml) values of paste formulation were significantly lower and smaller compared with those of granule formulation (0.21 μg/ml and 5.60 μgh/ml), respectively. The highest dry faecal concentrations were 710.46 μg/g and 537.21 μg/g and were determined at 48 h for both paste and granule formulation of PYR in donkeys, respectively. Pre-treatment EPG of 1104, 1061 and 1139 were observed for the control, PYR paste and PYR granule groups, respectively. Pre-treatment EPG were not significantly different (P>0.1) between groups. Post-treatment EPG for both PYR treatment groups were significantly different (P<0.001) from the control group until day 35. Following treatments the PYR formulations were efficient (>95% efficacy) until day 28. In all studied donkeys, coprocultures performed at day-3 revealed the presence of Cyathostomes, S. vulgaris. Faecal cultures performed on different days from C-group confirmed the presence of the same genera. Coprocultures from treated animals revealed the presence of few larvae of Cyathostomes. Copyright © 2014 Elsevier B.V. All rights reserved.

Edge length dynamics on graphs with applications to p-adic AdS/CFT

DOE PAGES

Gubser, Steven S.; Heydeman, Matthew; Jepsen, Christian; ...

2017-06-30

We formulate a Euclidean theory of edge length dynamics based on a notion of Ricci curvature on graphs with variable edge lengths. In order to write an explicit form for the discrete analog of the Einstein-Hilbert action, we require that the graph should either be a tree or that all its cycles should be sufficiently long. The infinite regular tree with all edge lengths equal is an example of a graph with constant negative curvature, providing a connection with p-adic AdS/CFT, where such a tree takes the place of anti-de Sitter space. Here, we compute simple correlators of the operatormore » holographically dual to edge length fluctuations. This operator has dimension equal to the dimension of the boundary, and it has some features in common with the stress tensor.« less

Edge length dynamics on graphs with applications to p-adic AdS/CFT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gubser, Steven S.; Heydeman, Matthew; Jepsen, Christian

We formulate a Euclidean theory of edge length dynamics based on a notion of Ricci curvature on graphs with variable edge lengths. In order to write an explicit form for the discrete analog of the Einstein-Hilbert action, we require that the graph should either be a tree or that all its cycles should be sufficiently long. The infinite regular tree with all edge lengths equal is an example of a graph with constant negative curvature, providing a connection with p-adic AdS/CFT, where such a tree takes the place of anti-de Sitter space. Here, we compute simple correlators of the operatormore » holographically dual to edge length fluctuations. This operator has dimension equal to the dimension of the boundary, and it has some features in common with the stress tensor.« less

The formation and analysis of a 5 deg equal area block terrestrial gravity field

NASA Technical Reports Server (NTRS)

Rapp, R. H.

1972-01-01

A set of 23,355 1 degree x 1 degree mean free air anomalies were used to predict a set of 5 degree equal area anomalies and their standard errors. Using the 1 degree data incorporating geophysically predicted values of ACIC, 1283 5 degree blocks were computed. Excluding the geophysically predicted anomalies 1249 blocks were computed. The 1 degree data were also used to compute covariance functions and the equatorial gravity and flattening implied by this data. The predicted anomalies were supplemented by model anomalies to form a complete 1654 global anomaly field. These data were used in a weighted least squares to determine potential coefficients to degree 15, and in a summation type formulation to determine potential coefficients to degree 25. These potential coefficients sets are compared to recent satellite determinations.

Field evaluation of a botanical formulation from the milky mangrove Excoecaria agallocha L. against Helicoverpa armigera Hübner. in Abelmoschus esculentus (lady's finger) and Cajanus cajan (pigeon pea).

PubMed

Santhanam, Satyan Ramachandran; Egigu, Meseret C

2014-09-01

To evaluate a formulation from the milky mangrove tree Excoecaria agallocha L. (E. agallocha) against Helicoverpa armigera Hubner (H. armigera). About 3% aqueous ethanolic spray formulation derived from the lipophilic extract of E. agallocha (dry leaf) was evaluated against H. armigera in Abelmoschus esculentus (lady's finger) and Cajanus cajan (C. cajan) (pigeon pea), under field conditions. On the 9th day of the 4th spray the larval count in the plot treated with 3% E. agallocha formulation drastically came down to 0.23 larva/plant, compared to 1.63 in the ethanol control plot and 1.60 in the unsprayed plot. Blocks sprayed with 3% E. agallocha formulation yielded 35.8 quintals/hectare (q/ha) of healthy pods compared to Ekalux® (pod yield: 60.7 q/ha), 3% Vijay Neem® (60.22 q/ha), yield plot (6 q/ha) and ethanol control (7 q/ha). In C. cajan, 1% E. agallocha, 3% Nimbecidine® and 0.07% indoxacarb were equally potent in reducing the larval population of H. armigera and the non-target pest Spilosoma obliqua to 0%, from the 9th day (3rd spray). Indoxacarb plot recorded the maximum yield of 16.1 q/ha with 2.4% pod damage. Plots sprayed with 1% E. agallocha yielded 14.7 q/ha with 2.32% pod damage. The effect of 3% Nimbecidine® spray (14.35 q/ha) was comparable to E. agallocha formulation. Unsprayed and ethanol control plots yielded 12.41 and 11.2 q/ha of pods with an average pod damage of 4.7%. E. agallocha formulation was found to be promising for the control of H. armigera, under field conditions. Copyright © 2014 Hainan Medical College. Published by Elsevier B.V. All rights reserved.

Efficacy of three formulations of diflubenzuron, an insect growth regulator, against Culex quinquefasciatus Say, the vector of Bancroftian filariasis in India

PubMed Central

Sadanandane, C.; Doss, P. S. Boopathi; Jambulingam, P.

2012-01-01

Background & objectives: Insect growth regulators (IGRs) offer alternatives to conventional chemical larvicides that pose problem of resistance and environmental safety. However, only a limited number of IGRs have been approved for use in mosquito control. In the present study, two new formulations of the IGR diflubenzuron, 2 per cent granular (GR) and 2 per cent tablet (DT) were tested for its efficacy against Culex quinquefasciatus, in comparison to its 25 per cent wettable powder (WP) formulation. Methods: The WP, GR and DT formulations were tested in cesspits, street drains and abandoned wells each at four dosages, 25, 50, 75 and 100 g ai/ha. Additionally, the DT formulation was tested at a higher dosage of 1 tablet/m2 (equal to 400 g ai/ha). Results: The WP and GR formulations yielded >80 per cent inhibition of adult emergence (IE) for 7-10 days in cesspits, 4-7 days in street drains and 7-21 days in abandoned wells at all dosages tested. The DT formulation was effective only at higher dosage 100 g ai/ha and or 1 tablet/m2 for 7-15 days at all habitats. Interpretation & conclusions: The trial showed that the dosage 25 g ai/ha of 25 per cent WP could be the field dosage for cesspits and wells, and 50 g ai/ha for drains, to be applied at weekly intervals. The dosages 25, 50 and 100 g ai/ha of 2 per cent GR could be the field dosages for application in cesspits at weekly intervals, in abandoned wells every three weeks and in drains at weekly intervals, respectively. Diflubenzuron 25 per cent WP and 2 per cent GR could be used for larval control of Cx. quinquefasciatus under integrated vector management programme. PMID:23287125

Burgers approximation for two-dimensional flow past an ellipse

NASA Technical Reports Server (NTRS)

Dorrepaal, J. M.

1982-01-01

A motivation is given for studying Burgers flow and a solution technique is outlined which works equally well for Oseen or Burgers flow past a circular cylinder. The separation behind the cylinder, the drag experienced by the cylinder, and asymptotic behavior far from the cylinder are described. It is shown that the predictions of Burgers flow near the cylinder provide a substantial improvement over those of Oseen flow. Finally, the equations of motion for Burgers flow past an ellipse are formulated and solved.

Combustion Mechanisms of Very High Burn Rate (VHBR) Propellant. Phase II.

DTIC Science & Technology

1995-09-01

potassium salt of B10H1 2-. The Kraton slate and the Hycar slate both contain RDX as the oxidizer, while the PEG slate contains HMX and TAGN in the... polyacrylate (Hycar), hydroxy-terminated polybutadiene, and a mixture of styrene and ethylene-butylene (Kraton). As might be expected, when all else is equal...proprietary formulations of Teledyne-McCormick-Selph (TMS), designated H498 and H466. In H498, a potassium cation is utilized, while in H466, an

Use of updated material properties in parametric optimization of spaceborne mirrors

NASA Astrophysics Data System (ADS)

Hull, Tony; Westerhoff, Thomas; Weidmann, Guenter; Kirchhoff, Rule

2016-07-01

Spaceborne sensor mirrors need to be both structurally efficient and to maintain figure through thermal transients. Both properties can be represented in a plot showing structural efficiency on one axis and thermal transient resilience on the other. For material selection, engineers have effectively used such charts. However in some cases thermal attributes have improved considerably. Using contemporary values, this comparison chart looks differently. We will discuss how lines of equal merit may be formulated differently depending on the orbit of the mission.

CLIMATE CHANGE: Information on Limitations and Assumptions of DOE’s Five-Lab Study

DTIC Science & Technology

1998-09-01

the potential consequences of climate change , the United States and other countries have entered into international negotiations and agreements. In...energy savings estimated to roughly equal or exceed costs. In view of the study’s potential influence on U.S. climate change policy, as requested, we...the study’s results, (3) the study’s role in the formulation of the Oct. 󈨥 climate change proposal and the Kyoto Conference’s emission-reduction goals for the U.S.

Least-squares finite element solutions for three-dimensional backward-facing step flow

NASA Technical Reports Server (NTRS)

Jiang, Bo-Nan; Hou, Lin-Jun; Lin, Tsung-Liang

1993-01-01

Comprehensive numerical solutions of the steady state incompressible viscous flow over a three-dimensional backward-facing step up to Re equals 800 are presented. The results are obtained by the least-squares finite element method (LSFEM) which is based on the velocity-pressure-vorticity formulation. The computed model is of the same size as that of Armaly's experiment. Three-dimensional phenomena are observed even at low Reynolds number. The calculated values of the primary reattachment length are in good agreement with experimental results.

An error analysis of least-squares finite element method of velocity-pressure-vorticity formulation for Stokes problem

NASA Technical Reports Server (NTRS)

Chang, Ching L.; Jiang, Bo-Nan

1990-01-01

A theoretical proof of the optimal rate of convergence for the least-squares method is developed for the Stokes problem based on the velocity-pressure-vorticity formula. The 2D Stokes problem is analyzed to define the product space and its inner product, and the a priori estimates are derived to give the finite-element approximation. The least-squares method is found to converge at the optimal rate for equal-order interpolation.

Impact Damage on a Thin Glass Plate with a Thin Polycarbonate Backing

DTIC Science & Technology

2013-07-13

fixed and equals 0.25 in 3D (close to the soda-lime glass Poisson ratio of 0.22), and 1/3 in 2D, since the assumption is that material points interact...only through a pair-potential. The Poisson ratio limitation is removed in the state-based formulation of peridynamics (see Ref. [26]), however, here...we use the bond-based for simplicity. We note that, in dynamic fracture problems of the type considered in this work, the Poisson ratio value does not

Hamiltonian formulation of systems with balanced loss-gain and exactly solvable models

NASA Astrophysics Data System (ADS)

Ghosh, Pijush K.; Sinha, Debdeep

2018-01-01

A Hamiltonian formulation of generic many-body systems with balanced loss and gain is presented. It is shown that a Hamiltonian formulation is possible only if the balancing of loss and gain terms occurs in a pairwise fashion. It is also shown that with the choice of a suitable co-ordinate, the Hamiltonian can always be reformulated in the background of a pseudo-Euclidean metric. If the equations of motion of some of the well-known many-body systems like Calogero models are generalized to include balanced loss and gain, it appears that the same may not be amenable to a Hamiltonian formulation. A few exactly solvable systems with balanced loss and gain, along with a set of integrals of motion are constructed. The examples include a coupled chain of nonlinear oscillators and a many-particle Calogero-type model with four-body inverse square plus two-body pair-wise harmonic interactions. For the case of nonlinear oscillators, stable solution exists even if the loss and gain parameter has unbounded upper range. Further, the range of the parameter for which the stable solutions are obtained is independent of the total number of the oscillators. The set of coupled nonlinear equations are solved exactly for the case when the values of all the constants of motions except the Hamiltonian are equal to zero. Exact, analytical classical solutions are presented for all the examples considered.

Development of qualitative and quantitative analysis methods in pharmaceutical application with new selective signal excitation methods for 13 C solid-state nuclear magnetic resonance using 1 H T1rho relaxation time.

PubMed

Nasu, Mamiko; Nemoto, Takayuki; Mimura, Hisashi; Sako, Kazuhiro

2013-01-01

Most pharmaceutical drug substances and excipients in formulations exist in a crystalline or amorphous form, and an understanding of their state during manufacture and storage is critically important, particularly in formulated products. Carbon 13 solid-state nuclear magnetic resonance (NMR) spectroscopy is useful for studying the chemical and physical state of pharmaceutical solids in a formulated product. We developed two new selective signal excitation methods in (13) C solid-state NMR to extract the spectrum of a target component from such a mixture. These methods were based on equalization of the proton relaxation time in a single domain via rapid intraproton spin diffusion and the difference in proton spin-lattice relaxation time in the rotating frame ((1) H T1rho) of individual components in the mixture. Introduction of simple pulse sequences to one-dimensional experiments reduced data acquisition time and increased flexibility. We then demonstrated these methods in a commercially available drug and in a mixture of two saccharides, in which the (13) C signals of the target components were selectively excited, and showed them to be applicable to the quantitative analysis of individual components in solid mixtures, such as formulated products, polymorphic mixtures, or mixtures of crystalline and amorphous phases. Copyright © 2012 Wiley Periodicals, Inc.

Improvement in bone properties by using risedronate adsorbed hydroxyapatite novel nanoparticle based formulation in a rat model of osteoporosis.

PubMed

Sahana, H; Khajuria, Deepak Kumar; Razdan, Rema; Mahapatra, D Roy; Bhat, M R; Suresh, Sarasija; Rao, R Ramachandra; Mariappan, L

2013-02-01

A superior drug formulation capable of achieving efficient osteogenesis is in imperative demand for the treatment of osteoporosis. In the present study we investigated the potential of using novel risedronate-hydroxyapatite (HA) nanoparticle based formulation in an animal model of established osteoporosis. Nanoparticles of HA loaded with risedronate (NHLR) of various sizes (80-130 nm) were generated for bone targeted drug delivery. Three months after ovariectomy, 36 ovariectomized (OVX) rats were divided into 6 equal groups and treated with various doses of NHLR (500, 350 and 250 microg/kg intravenous single dose) and sodium risedronate (500 microg/kg, intravenous single dose). Untreated OVX and sham OVX served as controls. One month after drug administration, the left tibia and femur were tested for bone mechanical properties and histology, respectively. In the right femur, bone density was measured by method based on Archimedes principle and bone porosity analyses were performed using X-ray imaging. NHLR (250 microg/kg) showed a significant increase in bone density and reduced bone porosity when compared with OVX control. Moreover, NHLR (250 microg/kg) significantly increased bone mechanical properties and bone quality when compared with OVX control. The results strongly suggest that the NHLR, which is a novel nanoparticle based formulation, has a therapeutic advantage over risedronate sodium monotherapy for the treatment of osteoporosis in a rat model of postmenopausal osteoporosis.

Laboratory and scaled up evaluation of cis-permethrin applied as a new ultra low volume formulation against Aedes aegypti (Diptera: Culicidae).

PubMed

Seccacini, Emilia; Masuh, Héctor; Licastro, Susana A; Zerba, Eduardo Nicolás

2006-01-01

Ultra low volume (ULV) aerial spraying is a common methodology for spatial treatments for Aedes aegypti (L.) control. Previous studies from our laboratory indicated that the cis isomer of permethrin has an excellent efficacy for vector control, in particular for Triatoma infestans. It was of interest to determine the efficacy of this pure isomer in a ULV water-based formulation for adult A. aegypti control, since both vectors usually are found together in South America. A method is presented to make a quick measure at laboratory level of the knock down effect (KT50) of a new EC water-based formulation of cis-permethrin, in a small Peet Grady chamber of 0.34 m3, with a specially designed glass sprayer. A deltamethrin standard ULV formulation "CISLIN" was used for comparison. cis-Permethrin showed a significantly lower KT50 value than deltamethrin (7.50 and 9.65 min, respectively). When the mosquitoes were introduced into the chamber 10 min after spraying KT50 values were almost equal (15.59 and 15.88 min, respectively). In scaled up bioassays the ULV formulation of cis-permethrin showed 100% mortality of A. aegypti adult mosquitoes at the beginning of the treatment (t=0) and some mortality at 1h post treatment of freshly introduced mosquitoes. It was concluded that cis-permethrin could be an excellent tool for control of A. aegypti and other vectors of medical importance, with fewer side effects and better cost-effectiveness than with the cyanopyrethroids.

IgG particle formation during filling pump operation: a case study of heterogeneous nucleation on stainless steel nanoparticles.

PubMed

Tyagi, Anil K; Randolph, Theodore W; Dong, Aichun; Maloney, Kevin M; Hitscherich, Carl; Carpenter, John F

2009-01-01

This study investigated factors associated with vial filling with a positive displacement piston pump leading to formation of protein particles in a formulation of an IgG. We hypothesized that nanoparticles shed from the pump's solution-contact surfaces nucleated protein aggregation and particle formation. Vials of IgG formulation filled at a clinical manufacturing site contained a few visible particles and about 100,000 particles (1.5-3 microm) per mL. In laboratory studies with the same model (National Instruments FUS-10) of pump, pumping of 20 mg/mL IgG formulation resulted in about 300,000 particles (1.5-3 microm) per mL. Pumping of protein-free formulation resulted in 13,000 particles (1.5-15 microm) per mL. More than 99% of the particles were 0.25-0.95 microm in size. Mixing of protein-free pumped solution with an equal volume of 40 mg/mL IgG resulted in 300,000 particles (1.5-15 microm) per mL. Also, mixing IgG formulation with 30,000/mL stainless steel nanoparticles resulted in formation of 30,000 protein microparticles (1.5-15 microm) per mL. Infrared spectroscopy showed that secondary structure of IgG in microparticles formed by pumping or mixing with steel nanoparticles was minimally perturbed. Our results document that nanoparticles of foreign materials shed by pumps can serve as heterogeneous nuclei for formation of protein microparticles. (c) 2008 Wiley-Liss, Inc. and the American Pharmacists Association

[Evaluation of the 2.5 mg fentanyl patch, applied using the half-side application procedure in patients with cancer pain].

PubMed

Kokubun, Hideya; Matoba, Motohiro; Okazaki, Miyoko; Hoka, Sumio; Yago, Kazuo

2008-03-01

Occasionally, pain control with the fentanyl patch may lead to overdose at an initial dose of 2.5 mg, as well as during dose increase from 2.5 to 5.0 mg. Respiratory depression and other adverse drug reactions associated with fentanyl overdose have been observed in several of our patients. We developed a procedure for applying one-half of the fentanyl patch formulations and evaluated the new mode of application by examining the fentanyl concentration in 32 patients with cancer-related pain who had been using the fentanyl patch for pain control. While some patients were treated with the full-sized 2.5-, 5.0-, or 7.5-mg formulations, others were treated with the half-sized 2.5-mg formulation. The fentanyl patch was equally divided by drawing a line on the side on which the product name and dose were written. Tegaderm was applied to the patient's skin, and after detaching from the protective liner, half of the patch was applied to overlap Tegaderm along the line and the other half applied directly to the skin. Blood samples were collected 48-72 h after patch application. The mean serum concentration of fentanyl given in the half-sized 2.5-mg formulation was 0.286 ng/ml, which was approximately one-half of the concentration of the full-sized 2.5-mg formulation, 0.544 ng/ml. Therefore the 2.5-mg fentanyl patch, applied using the one-half procedure we developed, is clinically useful.

Investigation of some topical formulations containing dexpanthenol.

PubMed

Stozkowska, Wiesława; Piekoś, Ryszard

2004-01-01

Owing to its ability to regenerate epidermal cells Dexpanthenol (D-panthenol; chemically known as (+)-2,4-dihydroxy-N-(3-hydroxypropyl)-3,3-dimethylbutyramide) has found use for the treatment of patholytic ileus and postoperative distention. The purpose of research was to develop a gel containing dexpanthenol by monitoring the effect of various concentrations of a gelating agent on the activity of the ciliary apparatus. A system containing 2.5% of hydroxyethylcellulose was optimal for the preparation of the gel. Together with a formulation containing 5% of dexpanthenol, drops with equal concentration of the active compound were tested for comparison. Physical characteristics, such as osmotic pressure, acidity, density and viscosity of the preparation were determined as well as its microbiological sterility. The anti-inflammatory activity of the gel was determined following its topical application. Epidermal tests showed its good tolerance after topical application to the shaved skin of guinea pigs.

Safety of HTX-019 (intravenous aprepitant) and fosaprepitant in healthy subjects.

PubMed

Ottoboni, Tom; Lauw, Michael; Keller, Mary Rose; Cravets, Matt; Manhard, Kimberly; Clendeninn, Neil; Quart, Barry

2018-06-06

Evaluate safety of HTX-019, a novel polysorbate 80- and synthetic surfactant-free intravenous formulation of neurokinin 1 receptor antagonist aprepitant for chemotherapy-induced nausea and vomiting. Two open-label, randomized, two-way crossover studies evaluated treatment-emergent adverse events (TEAEs) in 200 healthy subjects. Subjects received HTX-019 130 mg (30-min infusion) and fosaprepitant 150 mg (20- or 30-min infusion), with ≥7-day washout between doses. Less than or equal to 30 min after start of infusion, TEAEs occurred in 5 (3%) HTX-019 and 30 (15%) fosaprepitant recipients. No HTX-019 recipients had infusion-site adverse events, versus 15 (8%) fosaprepitant recipients. Treatment-related dyspnea occurred in one HTX-019 and six fosaprepitant recipients. No severe/serious TEAEs occurred; all TEAEs resolved. HTX-019 may provide a safer aprepitant formulation than fosaprepitant for chemotherapy-induced nausea and vomiting prevention.

Fritz London and the scale of quantum mechanisms

NASA Astrophysics Data System (ADS)

Monaldi, Daniela

2017-11-01

Fritz London's seminal idea of ;quantum mechanisms of macroscopic scale;, first articulated in 1946, was the unanticipated result of two decades of research, during which London pursued quantum-mechanical explanations of various kinds of systems of particles at different scales. He started at the microphysical scale with the hydrogen molecule, generalized his approach to chemical bonds and intermolecular forces, then turned to macrophysical systems like superconductors and superfluid helium. Along this path, he formulated a set of concepts-the quantum mechanism of exchange, the rigidity of the wave function, the role of quantum statistics in multi-particle systems, the possibility of order in momentum space-that eventually coalesced into a new conception of systems of equal particles. In particular, it was London's clarification of Bose-Einstein condensation that enabled him to formulate the notion of superfluids, and led him to the recognition that quantum mechanics was not, as it was commonly assumed, relevant exclusively as a micromechanics.

Nontoxic Ionic Liquid Fuels for Exploration Applications

NASA Technical Reports Server (NTRS)

Coil, Millicent

2015-01-01

The toxicity of propellants used in conventional propulsion systems increases not only safety risks to personnel but also costs, due to special handling required during the entire lifetime of the propellants. Orbital Technologies Corporation (ORBITEC) has developed and tested novel nontoxic ionic liquid fuels for propulsion applications. In Phase I of the project, the company demonstrated the feasibility of several ionic liquid formulations that equaled the performance of conventional rocket propellant monomethylhydrazine (MMH) and also provided low volatility and low toxicity. In Phase II, ORBITEC refined the formulations, conducted material property tests, and investigated combustion behavior in droplet and microreactor experiments. The company also explored the effect of injector design on performance and demonstrated the fuels in a small-scale thruster. The ultimate goal is to replace propellants such as MMH with fuels that are simultaneously high-performance and nontoxic. The fuels will have uses in NASA's propulsion applications and also in a range of military and commercial functions.

Pressure distribution under flexible polishing tools. I - Conventional aspheric optics

NASA Astrophysics Data System (ADS)

Mehta, Pravin K.; Hufnagel, Robert E.

1990-10-01

The paper presents a mathematical model, based on Kirchoff's thin flat plate theory, developed to determine polishing pressure distribution for a flexible polishing tool. A two-layered tool in which bending and compressive stiffnesses are equal is developed, which is formulated as a plate on a linearly elastic foundation. An equivalent eigenvalue problem and solution for a free-free plate are created from the plate formulation. For aspheric, anamorphic optical surfaces, the tool misfit is derived; it is defined as the result of movement from the initial perfect fit on the optic to any other position. The Polisher Design (POD) software for circular tools on aspheric optics is introduced. NASTRAN-based finite element analysis results are compared with the POD software, showing high correlation. By employing existing free-free eigenvalues and eigenfunctions, the work may be extended to rectangular polishing tools as well.

Orally disintegrating and oral standard olanzapine tablets similarly elevate the homeostasis model assessment of insulin resistance index and plasma triglyceride levels in 12 healthy men: a randomized crossover study.

PubMed

Vidarsdottir, Solrun; Vlug, Pauline; Roelfsema, Ferdinand; Frölich, Marijke; Pijl, Hanno

2010-09-01

Treatment with olanzapine is associated with obesity, diabetes mellitus, and dyslipidemia. Reports have indicated that orally disintegrating tablets (ODT) cause less weight gain than oral standard tablets (OST). The aim of this study was to compare the effect of short-term treatment with these 2 distinct olanzapine formulations on glucose and lipid metabolism in healthy men. Twelve healthy men (mean ± SEM age: 25.1 ± 5.5 years) received olanzapine ODT (10 mg od, 8 days), olanzapine OST (10 mg od, 8 days), or no intervention in a randomized crossover design. At breakfast and dinner, glucose, insulin, free fatty acids (FFA), and triglyceride concentrations were measured at 10-minute intervals from 30 minutes prior to 2 hours after ingestion of standard meals. Leptin and adiponectin concentrations were measured at 20- and 30-minute intervals, respectively, between 0000h-1200h. Physical activity was assessed with an accelerometer. Fuel oxidation was measured in fasting condition by indirect calorimetry. The study was conducted from April 2006 through September 2006. Treatment with olanzapine ODT and OST equally elevated the homeostasis model assessment of insulin resistance (HOMA-IR) (P = .005). At breakfast, both formulations equally increased fasting and postprandial triglyceride concentrations (P = .013 and P = .005, respectively) while decreasing fasting and postprandial FFA concentrations (P = .004 and P = .009, respectively). Body weight, body composition, physical activity, or fuel oxidation did not differ between treatment modalities. Eight days of treatment with both olanzapine formulations similarly increased HOMA-IR and triglyceride concentrations and decreased FFA concentrations in response to standard meals without affecting anthropometrics or physical activity. These data suggest that olanzapine hampers insulin action via mechanistic routes other than body adiposity or physical inactivity. controlled-trials.com. Identifier: ISRCTN17632637. © Copyright 2010 Physicians Postgraduate Press, Inc.

Methods for In-Flight Wing Shape Predictions of Highly Flexible Unmanned Aerial Vehicles: Formulation of Ko Displacement Theory

NASA Technical Reports Server (NTRS)

Ko, William L.; Fleischer, Van Tran

2010-01-01

The Ko displacement theory is formulated for a cantilever tubular wing spar under bending, torsion, and combined bending and torsion loading. The Ko displacement equations are expressed in terms of strains measured at multiple sensing stations equally spaced on the surface of the wing spar. The bending and distortion strain data can then be input to the displacement equations to calculate slopes, deflections, and cross-sectional twist angles of the wing spar at the strain-sensing stations for generating the deformed shapes of flexible aircraft wing spars. The displacement equations have been successfully validated for accuracy by finite-element analysis. The Ko displacement theory that has been formulated could also be applied to calculate the deformed shape of simple and tapered beams, plates, and tapered cantilever wing boxes. The Ko displacement theory and associated strain-sensing system (such as fiber optic sensors) form a powerful tool for in-flight deformation monitoring of flexible wings and tails, such as those often employed on unmanned aerial vehicles. Ultimately, the calculated displacement data can be visually displayed in real time to the ground-based pilot for monitoring the deformed shape of unmanned aerial vehicles during flight.

Is there a role for aerosol nasal sprays in the treatment of allergic rhinitis: a white paper.

PubMed

Luskin, Allan T; Blaiss, Michael S; Farrar, Judith R; Settipane, Russell; Hayden, Mary Lou; Stoloff, Stuart; Chadwick, Stephen J; Derebery, M Jennifer; Ettari, Mary P; Luskin, Susan; Naclerio, Robert

2011-01-01

This White Paper presents the Consensus Statements derived from a Special Issues Board (SIB) held in Chicago, IL, in October 2010. The SIB was convened to address the question of whether there is a need for both aerosol and aqueous intranasal steroids (INSs) in the treatment of allergic rhinitis (AR). The faculty reviewed the published record of efficacy and safety of aerosol and aqueous INSs, as well as patient and physician satisfaction and preferences for currently available INSs, and burden of disease. Agreement on unmet needs also included the practice experience of the faculty and their colleagues. The body of evidence indicates that INSs are equally effective and well tolerated for most patients. However, differences exist among current aqueous formulations as well as between these products and their aerosol antecedents, based on the properties of the nasal spray. Aerosol formulations, although no longer available, may be preferred for some patients with specific pathophysiology and may be preferred by some patients based on sensory perception. There are good reasons to expand the currently available options of INSs by having both aerosol and aqueous formulations.

Ligand reorganization and activation energies in nonadiabatic electron transfer reactions

NASA Astrophysics Data System (ADS)

Zhu, Jianjun; Wang, Jianji; Stell, George

2006-10-01

The activation energy and ligand reorganization energy for nonadiabatic electron transfer reactions in chemical and biological systems are investigated in this paper. The free energy surfaces and the activation energy are derived exactly in the general case in which the ligand vibration frequencies are not equal. The activation energy is derived by free energy minimization at the transition state. Our formulation leads to the Marcus-Hush [J. Chem. Phys. 24, 979 (1956); 98, 7170 (1994); 28, 962 (1958)] results in the equal-frequency limit and also generalizes the Marcus-Sumi [J. Chem. Phys. 84, 4894 (1986)] model in the context of studying the solvent dynamic effect on electron transfer reactions. It is found that when the ligand vibration frequencies are different, the activation energy derived from the Marcus-Hush formula deviates by 5%-10% from the exact value. If the reduced reorganization energy approximation is introduced in the Marcus-Hush formula, the result is almost exact.

Steady hydromagnetic flows in open magnetic fields. I - A class of analytic solutions. [for stellar winds

NASA Technical Reports Server (NTRS)

Low, B. C.; Tsinganos, K.

1986-01-01

In the case of an establishment of theoretical models of the hydromagnetic solar wind, the inclusion of the effects of the magnetic field in the solar wind makes it extremely dificult to solve the mathematical problem. This paper has the objective to present a set of particular analytic solutions. The general formulation of Tsinganos (1982) is used to identify a class of analytic solutions to the equations of steady hydromagnetic flows in spherical coordinates. Flow in an open magnetic field are studied, taking into account the problem in dimensionless form, the special case of radial flows with alpha = 0, general radial flows, illustrative examples for flows in which alpha is not equal to 0, a parametric study of nonradial flows in which alpha is not equal to zero, variations in the parameter nu, and variations in the initial speed eta.

Knowledge into learning: comparing lecture, e-learning and self-study take-home packet instructional methodologies with nurses.

PubMed

Soper, Tracey

2017-04-01

The aim of this quantitative experimental study was to examine which of three instructional methodologies of traditional lecture, online electronic learning (e-learning) and self-study take-home packets are effective in knowledge acquisition of professional registered nurses. A true experimental design was conducted to contrast the knowledge acquisition of 87 registered nurses randomly selected. A 40-item Acute Coronary Syndrome (ACS) true/false test was used to measure knowledge acquisition. Based on 0.05 significance level, the ANOVA test revealed that there was no difference in knowledge acquisition by registered nurses based on which of three learning instructional method they were assigned. It can be concluded that while all of these instructional methods were equally effective in knowledge acquisition, these methods may not be equally cost- and time-effective. The study was able to determine that there were no significant differences in knowledge acquisition of nurses between the three instructional methodologies. The study also found that all groups scored at the acceptable level for certification. It can be concluded that all of these instructional methods were equally effective in knowledge acquisition but are not equally cost- and time-effective. Therefore, hospital educators may wish to formulate policies regarding choice of instructional method that take into account the efficient use of nurses' time and institutional resources.

On the stability of projection methods for the incompressible Navier-Stokes equations based on high-order discontinuous Galerkin discretizations

NASA Astrophysics Data System (ADS)

Fehn, Niklas; Wall, Wolfgang A.; Kronbichler, Martin

2017-12-01

The present paper deals with the numerical solution of the incompressible Navier-Stokes equations using high-order discontinuous Galerkin (DG) methods for discretization in space. For DG methods applied to the dual splitting projection method, instabilities have recently been reported that occur for small time step sizes. Since the critical time step size depends on the viscosity and the spatial resolution, these instabilities limit the robustness of the Navier-Stokes solver in case of complex engineering applications characterized by coarse spatial resolutions and small viscosities. By means of numerical investigation we give evidence that these instabilities are related to the discontinuous Galerkin formulation of the velocity divergence term and the pressure gradient term that couple velocity and pressure. Integration by parts of these terms with a suitable definition of boundary conditions is required in order to obtain a stable and robust method. Since the intermediate velocity field does not fulfill the boundary conditions prescribed for the velocity, a consistent boundary condition is derived from the convective step of the dual splitting scheme to ensure high-order accuracy with respect to the temporal discretization. This new formulation is stable in the limit of small time steps for both equal-order and mixed-order polynomial approximations. Although the dual splitting scheme itself includes inf-sup stabilizing contributions, we demonstrate that spurious pressure oscillations appear for equal-order polynomials and small time steps highlighting the necessity to consider inf-sup stability explicitly.

Larvicidal activity of neem oil (Azadirachta indica) formulation against mosquitoes

PubMed Central

Dua, Virendra K; Pandey, Akhilesh C; Raghavendra, Kamaraju; Gupta, Ashish; Sharma, Trilochan; Dash, Aditya P

2009-01-01

Background Mosquitoes transmit serious human diseases, causing millions of deaths every year. Use of synthetic insecticides to control vector mosquitoes has caused physiological resistance and adverse environmental effects in addition to high operational cost. Insecticides of botanical origin have been reported as useful for control of mosquitoes. Azadirachta indica (Meliaceae) and its derived products have shown a variety of insecticidal properties. The present paper discusses the larvicidal activity of neem-based biopesticide for the control of mosquitoes. Methods Larvicidal efficacy of an emulsified concentrate of neem oil formulation (neem oil with polyoxyethylene ether, sorbitan dioleate and epichlorohydrin) developed by BMR & Company, Pune, India, was evaluated against late 3rd and early 4th instar larvae of different genera of mosquitoes. The larvae were exposed to different concentrations (0.5–5.0 ppm) of the formulation along with untreated control. Larvicidal activity of the formulation was also evaluated in field against Anopheles, Culex, and Aedes mosquitoes. The formulation was diluted with equal volumes of water and applied @ 140 mg a.i./m2 to different mosquito breeding sites with the help of pre calibrated knapsack sprayer. Larval density was determined at pre and post application of the formulation using a standard dipper. Results Median lethal concentration (LC50) of the formulation against Anopheles stephensi, Culex quinquefasciatus and Aedes aegypti was found to be 1.6, 1.8 and 1.7 ppm respectively. LC50 values of the formulation stored at 26°C, 40°C and 45°C for 48 hours against Ae. aegypti were 1.7, 1.7, 1.8 ppm while LC90 values were 3.7, 3.7 and 3.8 ppm respectively. Further no significant difference in LC50 and LC90 values of the formulation was observed against Ae. aegypti during 18 months storage period at room temperature. An application of the formulation at the rate of 140 mg a.i./m2 in different breeding sites under natural field conditions provided 98.1% reduction of Anopheles larvae on day 1; thereafter 100% reduction was recorded up to week 1 and more than 80% reduction up to week 3, while percent reduction against Culex larvae was 95.5% on day 1, and thereafter 80% reduction was achieved up to week 3. The formulation also showed 95.1% and, 99.7% reduction of Aedes larvae on day 1 and day 2 respectively; thereafter 100% larval control was observed up to day 7. Conclusion The neem oil formulation was found effective in controlling mosquito larvae in different breeding sites under natural field conditions. As neem trees are widely distributed in India, their formulations may prove to be an effective and eco-friendly larvicide, which could be used as an alternative for malaria control. PMID:19500429

Larvicidal activity of neem oil (Azadirachta indica) formulation against mosquitoes.

PubMed

Dua, Virendra K; Pandey, Akhilesh C; Raghavendra, Kamaraju; Gupta, Ashish; Sharma, Trilochan; Dash, Aditya P

2009-06-08

Mosquitoes transmit serious human diseases, causing millions of deaths every year. Use of synthetic insecticides to control vector mosquitoes has caused physiological resistance and adverse environmental effects in addition to high operational cost. Insecticides of botanical origin have been reported as useful for control of mosquitoes. Azadirachta indica (Meliaceae) and its derived products have shown a variety of insecticidal properties. The present paper discusses the larvicidal activity of neem-based biopesticide for the control of mosquitoes. Larvicidal efficacy of an emulsified concentrate of neem oil formulation (neem oil with polyoxyethylene ether, sorbitan dioleate and epichlorohydrin) developed by BMR & Company, Pune, India, was evaluated against late 3rd and early 4th instar larvae of different genera of mosquitoes. The larvae were exposed to different concentrations (0.5-5.0 ppm) of the formulation along with untreated control. Larvicidal activity of the formulation was also evaluated in field against Anopheles, Culex, and Aedes mosquitoes. The formulation was diluted with equal volumes of water and applied @ 140 mg a.i./m(2) to different mosquito breeding sites with the help of pre calibrated knapsack sprayer. Larval density was determined at pre and post application of the formulation using a standard dipper. Median lethal concentration (LC(50)) of the formulation against Anopheles stephensi, Culex quinquefasciatus and Aedes aegypti was found to be 1.6, 1.8 and 1.7 ppm respectively. LC(50) values of the formulation stored at 26 degrees C, 40 degrees C and 45 degrees C for 48 hours against Ae. aegypti were 1.7, 1.7, 1.8 ppm while LC(90) values were 3.7, 3.7 and 3.8 ppm respectively. Further no significant difference in LC(50) and LC(90) values of the formulation was observed against Ae. aegypti during 18 months storage period at room temperature. An application of the formulation at the rate of 140 mg a.i./m(2) in different breeding sites under natural field conditions provided 98.1% reduction of Anopheles larvae on day 1; thereafter 100% reduction was recorded up to week 1 and more than 80% reduction up to week 3, while percent reduction against Culex larvae was 95.5% on day 1, and thereafter 80% reduction was achieved up to week 3. The formulation also showed 95.1% and, 99.7% reduction of Aedes larvae on day 1 and day 2 respectively; thereafter 100% larval control was observed up to day 7. The neem oil formulation was found effective in controlling mosquito larvae in different breeding sites under natural field conditions. As neem trees are widely distributed in India, their formulations may prove to be an effective and eco-friendly larvicide, which could be used as an alternative for malaria control.

Fusarium semitectum, a potential mycopathogen against thrips and mites in chilli, Capsicum annuum.

PubMed

Mikunthan, G; Manjunatha, M

2006-01-01

In India, chilli (Capsicum annuum L.) suffers with a characteristic leaf curl symptoms due to the attack of mite, Polyphagotarsonemus latus (Banks) (Acari: Tarsonemidae) and thrips, Scirtothrips dorsalis Hood (Thysanoptera: Thripidae) or both. Experiments were conducted in the fields of College of Agriculture, Shimoga, India during kharif (September 2003 to January 2004) and summer (March-June) 2004. After proving its pathogenicity, the potential of the mycopathogen, Fusarium semitectum was evaluated under field conditions using the popular chilli variety "Byadagi". Different combinations of Fusarium semitectum formulations with monocrotophos (0.025% and 0.05%) were tested. Oil-emulsion and dust-water formulations (DWF) at 1x 10(8) spore/ml, DWF with monocrotophos and 5% Neem Seed Kernal Extract (NSKE) were evaluated. Population of S. dorsalis, P. latus, predatory mite Amblyseius ovalis and damage index were estimated. Populations of thrips, mite and the predatory mite were estimated at 15 days interval after 30 days of transplanting. Damage index was assessed using a visual rating method. Plant height, fruit length and dry chilli yield of each treatment were also taken. Among the treatments, oil-emulsion formulation and dust water formulation of F. semitectum in combination with monocrotophos (0.05%) reduced the population of thrips significantly over other treatments. Dust water formulation was achieved a significant decline of thrips population in chilli plants after 60 days of transplanting. This reduction of thrips population could be achieved due to the effect of second spraying, which was given at 50 days after transplanting. Chilli plant height and fruit length did not vary significantly among the treatment in both seasons. The highest dry chilli yield of 512 and 1058 kg/ha was recorded in dust water formulation in combination with monocrotophos (0.05%) followed by oil formulation (432 kg/ha and 763 kg/ha) in Kharif and summer seasons, respectively. Fusarium formulation sprayed plots were recorded low damage index than NSKE, water sprayed plots including control. Oil-emulsion formulation treated plot adjusted the highest benefit cost ratio of 6.07:1. Oil emulsion formulation (refined sunflower oil-Safola) was next best to the dust water formulation of F. semitectum. and monocrotophos combination and more-over equal to the monocrotophos 0.05% alone in suppressing the thrips and mite population. These results revealed that dust water formulation in combination with monocrotophos (0.05%) was able to suppress the population of thrips and mites and thus was able to give highest dry chilli yield. Oil emulsion formulation of F. semitectum can also be used as the next best choice in an environment friendly integrated chilli pest management programme.

A Stationary North-Finding Scheme for an Azimuth Rotational IMU Utilizing a Linear State Equality Constraint

PubMed Central

Yu, Huapeng; Zhu, Hai; Gao, Dayuan; Yu, Meng; Wu, Wenqi

2015-01-01

The Kalman filter (KF) has always been used to improve north-finding performance under practical conditions. By analyzing the characteristics of the azimuth rotational inertial measurement unit (ARIMU) on a stationary base, a linear state equality constraint for the conventional KF used in the fine north-finding filtering phase is derived. Then, a constrained KF using the state equality constraint is proposed and studied in depth. Estimation behaviors of the concerned navigation errors when implementing the conventional KF scheme and the constrained KF scheme during stationary north-finding are investigated analytically by the stochastic observability approach, which can provide explicit formulations of the navigation errors with influencing variables. Finally, multiple practical experimental tests at a fixed position are done on a postulate system to compare the stationary north-finding performance of the two filtering schemes. In conclusion, this study has successfully extended the utilization of the stochastic observability approach for analytic descriptions of estimation behaviors of the concerned navigation errors, and the constrained KF scheme has demonstrated its superiority over the conventional KF scheme for ARIMU stationary north-finding both theoretically and practically. PMID:25688588

Pilot-scale production and liquid formulation of Rhodotorula minuta, a potential biocontrol agent of mango anthracnose.

PubMed

Patiño-Vera, M; Jiménez, B; Balderas, K; Ortiz, M; Allende, R; Carrillo, A; Galindo, E

2005-01-01

To develop a pilot-plant fermentation process for the production of the yeast Rhodotorula minuta, to be used as a biocontrol agent of mango anthracnose, using a low-cost culture medium. To develop a stable liquid formulation that preserve high viability of the yeast stored at 4 degrees C. Keeping constant the volumetric power input, a fermentation process was scaled-up from shake flasks to a 100 l bioreactor. Preharvest applications of the yeast resulted in postharvest anthracnose severity equal or lower than that observed with a chemical fungicide. Glycerol was added to the formulation as water activity reducer and xanthan gum as a viscosity-enhancing agent. Yeast initial concentration of 10(10) CFU ml(-1) resulted in 4-5 orders of magnitude decrease after 1 month of storage at 4 degrees C, whereas when it was formulated at 10(9) CFU ml(-1), the decrease was of two orders of magnitude in 6 months. The fermentation process was successfully scaled-up using a low-cost culture medium. Postharvest anthracnose severity could be considerably reduced using this yeast. Formulating the yeast at 10(9) CFU ml(-1) and adding glycerol (20%) and xanthan (5 g l(-1)) avoided both contamination and yeast sedimentation and it was able to preserve up to 10(7) CFU ml(-1) after 6 months at 4 degrees C. The yeast R. minuta is reported as a novel antagonistic micro-organism against the pathogen Colletotrichum gloeosporioides. Pilot plant production of this yeast allowed us to conduct field tests in commercial orchards during three harvest seasons. Yeast suspensions applied to mango trees reduced the fruit anthracnose severity in levels similar or better than chemical fungicides.

The solubility-permeability interplay and its implications in formulation design and development for poorly soluble drugs.

PubMed

Dahan, Arik; Miller, Jonathan M

2012-06-01

While each of the two key parameters of oral drug absorption, the solubility and the permeability, has been comprehensively studied separately, the relationship and interplay between the two have been largely ignored. For instance, when formulating a low-solubility drug using various solubilization techniques: what are we doing to the apparent permeability when we increase the solubility? Permeability is equal to the drug's diffusion coefficient through the membrane times the membrane/aqueous partition coefficient divided by the membrane thickness. The direct correlation between the intestinal permeability and the membrane/aqueous partitioning, which in turn is dependent on the drug's apparent solubility in the GI milieu, suggests that the solubility and the permeability are closely associated, exhibiting a certain interplay between them, and the current view of treating the one irrespectively of the other may not be sufficient. In this paper, we describe the research that has been done thus far, and present new data, to shed light on this solubility-permeability interplay. It has been shown that decreased apparent permeability accompanies the solubility increase when using different solubilization methods. Overall, the weight of the evidence indicates that the solubility-permeability interplay cannot be ignored when using solubility-enabling formulations; looking solely at the solubility enhancement that the formulation enables may be misleading with regards to predicting the resulting absorption, and hence, the solubility-permeability interplay must be taken into account to strike the optimal solubility-permeability balance, in order to maximize the overall absorption.

Pharmacokinetic/pharmacodynamic model of the testosterone effects of triptorelin administered in sustained release formulations in patients with prostate cancer.

PubMed

Romero, Elba; Vélez de Mendizabal, Nieves; Cendrós, Josep-María; Peraire, Concepción; Bascompta, Emma; Obach, Rosendo; Trocóniz, Iñaki F

2012-09-01

The objectives of the current work were to develop a predictive population pharmacokinetic (PK)/pharmacodynamic (PD) model for the testosterone (TST) effects of triptorelin (TRP) administered in sustained-release (SR) formulations to patients with prostate cancer and determine the minimal required triptorelin serum concentration (C(TRP_min)) to keep the testosterone levels of the patients below or equal to the level of castration (TST ≤ 0.5 ng/ml). A total of eight healthy male volunteers and 74 patients with prostate cancer received one or two doses of triptorelin injected subcutaneously or intramuscularly. Five different triptorelin formulations were tested. Pharmacokinetic (serum concentration of triptorelin) and pharmacodynamic (TST levels in serum) data were analyzed by using the population approach with NONMEM software (http://www.iconplc.com/technology/products/nonmem/). The PK/PD model was constructed by assembling the agonist nature of triptorelin with the competitive reversible receptor binding interaction with the endogenous agonist, a process responsible for the initial and transient TST flare-up, and triggering down-regulation mechanisms described as a decrease in receptor synthesis. The typical population values of K(D), the receptor equilibrium dissociation constant of triptorelin, and C(TRP_min) to keep 95% of the patients castrated were 0.931 and 0.0609 ng/ml, respectively. The semimechanistic nature of the model renders the predictions of the effect of triptorelin on TST possible regardless the type of SR formulation administered, while exploring different designs during the development of new delivery systems.

Evaluation of a mucoadhesive buccal patch for delivery of peptides: in vitro screening of bioadhesion.

PubMed

Li, C; Bhatt, P P; Johnston, T P

1998-10-01

We have assessed the bioadhesive properties of several different mucoadhesive buccal patches. The patches consisted of custom coformulations of silicone polymers and Carbopol 974P. The contact angle of water was measured for each of the test formulations, using an ophthalmic shadow scope. The corresponding work of adhesion between the water and the patches (W1), and between the patches and freshly-excised rabbit buccal mucosa (W2) was then calculated, using a modification of Dupre's equation. The bioadhesive strength between the patches and excised rabbit buccal mucosa was also assessed. The results of the contact-angle measurements indicated that the contact angle decreased with an increase in the amount of Carbopol in the formulation. Additionally, the calculated values of both W1 and W2 increased with an increase in the amount of Carbopol in the buccal-patch formulations. A correlation (r not equal to 0.9808) was found between the measured contact angle and the calculated values for W2. The direct measurement of the force required to separate a buccal patch from excised rabbit buccal mucosa with the INSTRON demonstrated that the adhesive strength increased with an increase in the amount of Carbopol. This preliminary study has shown that the measurement of contact angles alone may provide a useful technique for estimating the work of adhesion, and may serve as a convenient and rapid screening procedure to identify potential mucoadhesive buccal-patch formulations.

Effect of pH and leucine concentration on aerosolization properties of carrier-free formulations of levofloxacin.

PubMed

Barazesh, Ahmadreza; Gilani, Kambiz; Rouini, Mohammadreza; Barghi, Mohammad Ali

2018-06-15

The aim of this study was to evaluate the effect of leucine at different pH values preferred for inhalation on particle characteristics and aerosolization performance of spray dried carrier-free formulations of levofloxacin. A full factorial design was applied to optimize the formulation containing levofloxacin with or without leucine in different pH values and the optimum condition was determined. Particle size and morphology, crystallinity state, electrostatic charge and surface composition of the particles were determined. Aerodynamic properties of the powders were also assessed by an Andersen cascade impactor after aerosolization through an Aerolizer® at an air flow rate of 60 L/min. The pH of initial solution affected various physical properties of the drug containing particles and hence their in vitro deposition. The profound effect of pH was on water content, electrostatic charge and surface composition of the particles. The negative effect of water content on in vitro deposition of the drug was covered by preferred surface accumulation of leucine at pH 6. Optimum formulation which obtained by co-spray drying of the drug with 21.79% leucine at pH 5.98 presented a fine particle fraction equal to 54.38. In conclusion, changing pH of the initial solution influenced the effect of leucine on aerosolization of levofloxacine spray dried particles by modification of their physical properties. Copyright © 2018 Elsevier B.V. All rights reserved.

Dipolar correlations and the dielectric permittivity of water.

PubMed

Sharma, Manu; Resta, Raffaele; Car, Roberto

2007-06-15

The static dielectric properties of liquid and solid water are investigated within linear response theory in the context of ab initio molecular dynamics. Using maximally localized Wannier functions to treat the macroscopic polarization we formulate a first-principles, parameter-free, generalization of Kirkwood's phenomenological theory. Our calculated static permittivity is in good agreement with experiment. Two effects of the hydrogen bonds, i.e., a significant increase of the average local moment and a local alignment of the molecular dipoles, contribute in almost equal measure to the unusually large dielectric constant of water.

Comparative Pharmacodynamics and Plasma Concentrations of D-Threo-Methylphenidate Hydrochloride after Single Doses of D-Threo-Methylphenidate Hydrochloride and D,l-Threo-Methylphenidate Hydrochloride in a Double-Blind, Placebo-Controlled, Crossover Laboratory School Study in Children with Attention-Deficit/hyperactivity Disorder

ERIC Educational Resources Information Center

Quinn, Declan; Wigal, Sharon; Swanson, James; Hirsch, Sharon; Ottolini, Yvonne; Dariani, Maghsoud; Roffman, Mark; Zeldis, Jerome; Cooper, Thomas

2004-01-01

Objective: Methylphenidate has four optical isomers due to two asymmetries (erythro-threo and dextro-levo). The initial commercial formulation eliminated the erythro isomer, but the dextro-levo asymmetry was racemic, with equal amounts of d and l-threo isomers (d,l-MPH). Previous work has suggested that the d-threo isomer methylphenidate (d-MPH)…

A least-squares finite element method for incompressible Navier-Stokes problems

NASA Technical Reports Server (NTRS)

Jiang, Bo-Nan

1992-01-01

A least-squares finite element method, based on the velocity-pressure-vorticity formulation, is developed for solving steady incompressible Navier-Stokes problems. This method leads to a minimization problem rather than to a saddle-point problem by the classic mixed method and can thus accommodate equal-order interpolations. This method has no parameter to tune. The associated algebraic system is symmetric, and positive definite. Numerical results for the cavity flow at Reynolds number up to 10,000 and the backward-facing step flow at Reynolds number up to 900 are presented.

Une formulation variationnelle du problème de contact avec frottement de Coulomb

NASA Astrophysics Data System (ADS)

Le van, Anh; Nguyen, Tai H. T.

2008-07-01

A variational relationship is proposed as the weak form of the large deformation contact problem with Coulomb friction. It is a mixed relationship involving both the displacements and the multipliers; the weighting functions are the virtual displacements and the virtual multipliers. It is shown that the proposed weak form is equivalent to the strong form of the initial/boundary value contact problem and the multipliers are equal to the contact tractions. To cite this article: A. Le van, T.H.T. Nguyen, C. R. Mecanique 336 (2008).

Controller reduction by preserving impulse response energy

NASA Technical Reports Server (NTRS)

Craig, Roy R., Jr.; Su, Tzu-Jeng

1989-01-01

A model order reduction algorithm based on a Krylov recurrence formulation is developed to reduce order of controllers. The reduced-order controller is obtained by projecting the full-order LQG controller onto a Krylov subspace in which either the controllability or the observability grammian is equal to the identity matrix. The reduced-order controller preserves the impulse response energy of the full-order controller and has a parameter-matching property. Two numerical examples drawn from other controller reduction literature are used to illustrate the efficacy of the proposed reduction algorithm.

Weld bonding of titanium with polyimide adhesives

NASA Technical Reports Server (NTRS)

Vaughan, R. W.; Sheppard, C. H.; Orell, M. K.

1975-01-01

A conductive adhesive primer and a capillary flow adhesive were developed for weld bonding titanium alloy joints. Both formulations contained ingredients considered to be non-carcinogenic. Lap-shear joint test specimens and stringer-stiffened panels were weld bonded using a capillary flow process to apply the adhesive. Static property information was generated for weld bonded joints over the temperature range of 219K (-65 F) to 561K (550 F). The capillary flow process was demonstrated to produce weld bonded joints of equal strength to the weld through weld bonding process developed previously.

Environmental fate and effects of granular pesta formulation from strains of Pseudomonas aeruginosa C1501 and Lasiodiplodia pseudotheobromae C1136 on soil activity and weeds.

PubMed

Adetunji, Charles Oluwaseun; Oloke, Julius Kola; Osemwegie, Osarenkhoe Omorefosa

2018-03-01

This work investigated the effect of variably formulated pesta granules containing wild and UV mutated Pseudomonas aeruginosa and Lasiodiplodia pseudotheobromae on the rate of CO 2 evolution, organic carbon content, enzymatic activity (acidic and alkaline phosphatase, dehydrogenases, urease and protease) and representative soil microorganisms in the soils using different assay techniques. After the 35th day period of experiment, the pesta granule formulation BH4 showed the best evolution of CO 2 (824 ± 6.2 mg CO 2 kg -1 soil hr -1 ) as against control treatment (689 ± 3.7 mg CO 2 kg -1 soil hr -1 ). Enzymes activities, organic carbon content of 3.8% on the 15th day of study and stable representation of microorganisms that include actinomycetes, fungi, heterogenous as well as soil nitrogen-mediatory bacteria were equally at their maximum level BH4 treatments. The phytotoxic assay showed no inhibitory effect on Solanum lycopersicum seeds and seedlings compared to the observed growth inhibition on the tested weeds (Amaranthus hybridus and Echinocholoa crus-galli) which corresponds with positive control glyphosate treatment. The glyphosate treated soil had the least critical results on parameters investigated during the study. The order of bioherbicidal activity is BH4>BH2>BH6>BH3>BH1>BH5>positive control. Results from this study confirmed the target efficacy of variably formulated pesta granules which is sustainable, cheap, ecologically suitable and recent. This is in addition to recognizing the microbial-derived formulations as characteristically potent alternative to chemical herbicides utility in agrosystems practice. Further study of the underlining factor responsible for the bioherbicidal performances of the variably formulated pesta granules and field trials are critical for their future commercialization. Copyright © 2017 Elsevier Ltd. All rights reserved.

Nonclinical evaluation of the potential for mast cell activation by an erythropoietin analog

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weaver, James L., E-mail: James.Weaver@fda.hhs.gov; Boyne, Michael, E-mail: mboyne@biotechlogic.com; Pang, Eric, E-mail: Eric.Pang@fda.hhs.gov

The erythropoietin analog peginesatide was withdrawn from marketing due to unexpected severe anaphylactic reactions associated with administration of the multi-use formulation. The adverse events occurred rapidly following the first ever administration of the drug with most affected patients becoming symptomatic in less than 30 min. This is most consistent with an anaphylactoid reaction due to direct activation of mast cells. Laboratory evaluation was undertaken using rat peritoneal mast cells as the model system. Initial studies showed that high concentrations of the formulated drug as well as formulated vehicle alone could cause mast cell degranulation as measured by histamine release. Themore » purified active drug was not able to cause histamine release whereas the vehicle filtrate and lab created drug vehicle were equally potent at causing histamine release. Individual formulations of vehicle leaving one component out showed that histamine release was due to phenol. Dose response studies with phenol showed a very sharp dose response curve that was similar in three buffer systems. Cellular analysis by flow cytometry showed that the histamine release was not due to cell death, and that changes in light scatter parameters consistent with degranulation were rapidly observed. Limited testing with primary human mast cells showed a similar dose response of histamine release with exposure to phenol. To provide in vivo confirmation, rats were injected with vehicle formulated with various concentrations of phenol via a jugular vein cannula. Significant release of histamine was detected in blood samples taken 2 min after dosing at the highest concentrations tested. - Highlights: • Peginesatide caused severe anaphylactoid reactions in 0.2% of patients. • Both formulated drug and vehicle cause degranulation of rat mast cells. • Phenol was identified as the vehicle component causing degranulation. • Human mast cells show similar dose response to phenol as rat mast cells. • Histamine release could be caused in vivo in rats by rapid phenol injection.« less

Simultaneous determination and characterization of tannins and triterpene saponins from the fruits of various species of Terminalia and Phyllantus emblica using a UHPLC-UV-MS method: application to triphala.

PubMed

Avula, Bharathi; Wang, Yan-Hong; Wang, Mei; Shen, Yun-Heng; Khan, Ikhlas A

2013-01-01

Terminalia species are a rich source of tannins. Many preparations of these species are used in traditional medicine and have many different ethnobotanical applications. A simple UHPLC method was developed for the simultaneous analysis of such hydrolysable tannins and triterpene saponins from the fruit rinds of different species of Terminalia (T. chebula, T. arjuna, T. bellirica) and Phyllantus emblica. A separation by LC was achieved using a reversed-phase column and a water/acetonitrile mobile phase, both containing formic acid, using a gradient system and a temperature of 40°C. Eight hydrolysable tannins (gallic acid, gallic acid methyl ester, corilagin, chebulagic acid, 1,2,3,6-tetra-O-galloyl-β-D-glucose, ellagic acid, chebulinic acid, and 1,2,3,4,6-penta-O-galloyl-β-D-glucose) and six triterpene saponins (arjunglucoside-I, arjunglucoside-III, chebuloside II, bellericoside, arjunetin, and arjunglucoside-II) could be separated within 20 minutes. The wavelength used for detection with the diode array detector was 254 and 275 nm for tannins and 205 nm for triterpene saponins. The method was validated for linearity, repeatability, limits of detection, and limits of quantification. The developed method is economical, fast, and especially suitable for quality control analysis of tannins and triterpene saponins in various plant samples and commercial products of Terminalia. Georg Thieme Verlag KG Stuttgart · New York.

Novel siRNA formulation to effectively knockdown mutant p53 in osteosarcoma.

PubMed

Kundu, Anup K; Iyer, Swathi V; Chandra, Sruti; Adhikari, Amit S; Iwakuma, Tomoo; Mandal, Tarun K

2017-01-01

The tumor suppressor p53 plays a crucial role in the development of osteosarcoma. The primary objective of this study is to develop and optimize lipid based nanoparticle formulations that can carry siRNA and effectively silence mutant p53 in 318-1, a murine osteosarcoma cell line. The nanoparticles were composed of a mixture of two lipids (cholesterol and DOTAP) and either PLGA or PLGA-PEG and prepared by using an EmulsiFlex-B3 high pressure homogenizer. A series of studies that include using different nanoparticles, different amount of siRNAs, cell numbers, incubation time, transfection media volume, and storage temperature was performed to optimize the gene silencing efficiency. Replacement of lipids by PLGA or PLGA-PEG decreased the particle size and overall cytotoxicity. Among all lipid-polymer nanoformulations, nanoparticles with 10% PLGA showed highest mutant p53 knockdown efficiency while maintaining higher cell viability when a nanoparticle to siRNA ratio equal to 6.8:0.66 and 75 nM siRNA was used. With long term storage the mutant p53 knockdown efficiency decreased to a greater extent. This study warrants a future evaluation of this formulation for gene silencing efficiency of mutant p53 in tissue culture and animal models for the treatment of osteosarcoma.

Affine group formulation of the Standard Model coupled to gravity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chou, Ching-Yi, E-mail: l2897107@mail.ncku.edu.tw; Ita, Eyo, E-mail: ita@usna.edu; Soo, Chopin, E-mail: cpsoo@mail.ncku.edu.tw

In this work we apply the affine group formalism for four dimensional gravity of Lorentzian signature, which is based on Klauder’s affine algebraic program, to the formulation of the Hamiltonian constraint of the interaction of matter and all forces, including gravity with non-vanishing cosmological constant Λ, as an affine Lie algebra. We use the hermitian action of fermions coupled to gravitation and Yang–Mills theory to find the density weight one fermionic super-Hamiltonian constraint. This term, combined with the Yang–Mills and Higgs energy densities, are composed with York’s integrated time functional. The result, when combined with the imaginary part of themore » Chern–Simons functional Q, forms the affine commutation relation with the volume element V(x). Affine algebraic quantization of gravitation and matter on equal footing implies a fundamental uncertainty relation which is predicated upon a non-vanishing cosmological constant. -- Highlights: •Wheeler–DeWitt equation (WDW) quantized as affine algebra, realizing Klauder’s program. •WDW formulated for interaction of matter and all forces, including gravity, as affine algebra. •WDW features Hermitian generators in spite of fermionic content: Standard Model addressed. •Constructed a family of physical states for the full, coupled theory via affine coherent states. •Fundamental uncertainty relation, predicated on non-vanishing cosmological constant.« less

Nutritional evaluation of Glutenol: a co-product of ethanol production.

PubMed

Corray, S P; Utterback, P L; Parsons, C M

2018-06-26

The objective of this study was to evaluate the nutritional value of Glutenol, a new coproduct of the ethanol industry. Glutenol was produced by Quality Technology International, Elgin, IL, in a modified wet-milling plant using a hybrid process, NextGenFrac, which fractionates the corn kernel components prior to fermentation without the use of sulfur dioxide. Glutenol was analyzed to contain 52.3% CP, 1.7% Met + Cys, 1.32% Lys, 1.69% Thr, and 2.23% Val on a DM basis. Two precision-fed rooster assays with conventional and cecectomized roosters were conducted to determine TMEn and standardized digestibility of amino acids (AA), respectively. The TMEn of Glutenol was determined to be 3,256 kcal/kg DM. Standardized digestibility values for Lys, Met, Cys, Thr, and Val were 80.1%, 90.4%, 80.1%, 74.1%, 81.1%, and 84.9%, respectively. In addition, a 3-wk broiler chick assay was conducted with increasing levels of dietary Glutenol. Diet 1 was a standard corn/soybean meal diet with 0% Glutenol. Diets 2, 3, and 4 had increasing levels of Glutenol at 4%, 8%, and 12%, respectively. Diets were fed from 3 to 22 d post-hatch and all diets were formulated to be equal in TMEn and digestible AA. Weight gain, feed intake, and gain/feed ratio were measured. No differences in growth performance were observed among dietary treatments. In conclusion, Glutenol can be fed up to at least 12% in the diet of broiler chickens if diets are formulated to be equal in ME and digestible AA.

A new algorithm for real-time optimal dispatch of active and reactive power generation retaining nonlinearity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roy, L.; Rao, N.D.

1983-04-01

This paper presents a new method for optimal dispatch of real and reactive power generation which is based on cartesian coordinate formulation of economic dispatch problem and reclassification of state and control variables associated with generator buses. The voltage and power at these buses are classified as parametric and functional inequality constraints, and are handled by reduced gradient technique and penalty factor approach respectively. The advantage of this classification is the reduction in the size of the equality constraint model, leading to less storage requirement. The rectangular coordinate formulation results in an exact equality constraint model in which the coefficientmore » matrix is real, sparse, diagonally dominant, smaller in size and need be computed and factorized once only in each gradient step. In addition, Lagragian multipliers are calculated using a new efficient procedure. A natural outcome of these features is the solution of the economic dispatch problem, faster than other methods available to date in the literature. Rapid and reliable convergence is an additional desirable characteristic of the method. Digital simulation results are presented on several IEEE test systems to illustrate the range of application of the method visa-vis the popular Dommel-Tinney (DT) procedure. It is found that the proposed method is more reliable, 3-4 times faster and requires 20-30 percent less storage compared to the DT algorithm, while being just as general. Thus, owing to its exactness, robust mathematical model and less computational requirements, the method developed in the paper is shown to be a practically feasible algorithm for on-line optimal power dispatch.« less

A novel decontaminant and wound healant formulation of N,N'-dichloro-bis[2,4,6-trichlorophenyl]urea against sulfur mustard-induced skin injury.

PubMed

Lomash, Vinay; Pant, Satish C

2014-01-01

Sulfur mustard (SM)-induced dermatotoxicity can be prevented by an immediate use of decontamination agents. However, practically due to the time lapse between decontamination and exposure, there is always a possibility of wound formation. In view of this, a hydrophilic decontamination formulation of CC-2 (DRDE/WH-03) was fortified with Aloe vera gel and betaine (DRDE/WH-01) for improving its wound healing ability. Swiss albino mice were exposed to SM percutaneously (5 mg/kg) once, and after 24 hours, DRDE/WH-01, DRDE/WH-03, framycetin, and aloe gel were applied topically, daily for 7 days. Skin sections were subjected to histopathology, histomorphologic grading, tissue leukocytosis, and immunohistochemistry of inflammatory-reparative biomarkers on 3 and 7 days, respectively. DRDE/WH-01, framycetin, and aloe gel showed better reepithelialization, angiogenesis, and fibroplasia compared with DRDE/WH-03 and SM control. On the basis of histomorphologic scale, DRDE/WH-01, framycetin, and aloe gel were found to be equally efficacious. Up-regulation of interleukin-6 and infiltrating leukocytes, endothelial nitric oxide synthase and angiogenesis, fibroblast growth factor, and transforming growth factor-alpha with fibroplasia and reepithelialization were well correlated at various stages of the healing process. DRDE/WH-01 was equally effective as framycetin and has shown improved wound healing efficacy compared with DRDE/WH-03. Thus, DRDE/WH-01 can be recommended as a universal decontaminant and wound healant against vesicant-induced skin injury. © 2014 by the Wound Healing Society.

Membrane triangles with corner drilling freedoms. II - The ANDES element

NASA Technical Reports Server (NTRS)

Felippa, Carlos A.; Militello, Carmelo

1992-01-01

This is the second article in a three-part series on the construction of 3-node, 9-dof membrane elements with normal-to-its-plane rotational freedoms (the so-called drilling freedoms) using parametrized variational principles. In this part, one such element is derived within the context of the assumed natural deviatoric strain (ANDES) formulation. The higher-order strains are obtained by constructing three parallel-to-sides pure-bending modes from which natural strains are obtained at the corner points and interpolated over the element. To attain rank sufficiency, an additional higher-order 'torsional' mode, corresponding to equal hierarchical rotations at each corner with all other motions precluded, is incorporated. The resulting formulation has five free parameters. When these parameters are optimized against pure bending by energy balance methods, the resulting element is found to coalesce with the optimal EFF element derived in Part I. Numerical integration as a strain filtering device is found to play a key role in this achievement.

Relative motions of fragments of the split comets. I - A new approach

NASA Technical Reports Server (NTRS)

Sekanina, Z.

1977-01-01

A hypothesis is proposed which interprets the relative motion of two fragments of a split comet in terms of a slight difference between their effective solar attraction rather than in terms of the impulse imparted to them at separation. A quantitative version of this hypothesis is formulated by assuming that the difference in effective solar attraction varies with heliocentric distance in direct proportion to the actual solar attraction so that the ratio of the two forces is constant and equal to a measure of the relative effect between the two fragments under consideration. Results obtained using this formulation are compared with observational evidence on the split comets P/Biela, Liais 1860 I, 1882 II, P/Brooks 2 1889 V, Swift 1899 I, Kopff 1905 IV, Mellish 1915 II, Taylor 1916 I, 1947 XII, Wirtanen 1957 VI, Ikeya-Seki 1965 VIII, Kohoutek 1970 III, and West 1975n. The hypothesis is found to fail only in the case of comet Wirtanen 1957 VI. Some unusual phenomena associated with split comets are examined.

Consideration of plant behaviour in optimal servo-compensator design

NASA Astrophysics Data System (ADS)

Moase, W. H.; Manzie, C.

2016-07-01

Where the most prevalent optimal servo-compensator formulations penalise the behaviour of an error system, this paper considers the problem of additionally penalising the actual states and inputs of the plant. Doing so has the advantage of enabling the penalty function to better resemble an economic cost. This is especially true of problems where control effort needs to be sensibly allocated across weakly redundant inputs or where one wishes to use penalties to soft-constrain certain states or inputs. It is shown that, although the resulting cost function grows unbounded as its horizon approaches infinity, it is possible to formulate an equivalent optimisation problem with a bounded cost. The resulting optimisation problem is similar to those in earlier studies but has an additional 'correction term' in the cost function, and a set of equality constraints that arise when there are redundant inputs. A numerical approach to solve the resulting optimisation problem is presented, followed by simulations on a micro-macro positioner that illustrate the benefits of the proposed servo-compensator design approach.

Design of Robust Adaptive Unbalance Response Controllers for Rotors with Magnetic Bearings

NASA Technical Reports Server (NTRS)

Knospe, Carl R.; Tamer, Samir M.; Fedigan, Stephen J.

1996-01-01

Experimental results have recently demonstrated that an adaptive open loop control strategy can be highly effective in the suppression of unbalance induced vibration on rotors supported in active magnetic bearings. This algorithm, however, relies upon a predetermined gain matrix. Typically, this matrix is determined by an optimal control formulation resulting in the choice of the pseudo-inverse of the nominal influence coefficient matrix as the gain matrix. This solution may result in problems with stability and performance robustness since the estimated influence coefficient matrix is not equal to the actual influence coefficient matrix. Recently, analysis tools have been developed to examine the robustness of this control algorithm with respect to structured uncertainty. Herein, these tools are extended to produce a design procedure for determining the adaptive law's gain matrix. The resulting control algorithm has a guaranteed convergence rate and steady state performance in spite of the uncertainty in the rotor system. Several examples are presented which demonstrate the effectiveness of this approach and its advantages over the standard optimal control formulation.

Associative polymers bridging between layers of multilamellar vesicles.

NASA Astrophysics Data System (ADS)

Choi, Seo; Bhatia, Surita

2006-03-01

Multilamellar vesicles can be found in a variety of pharmaceutical formulations, personal care products, and home care products. Hydrophobically modified associative polymers are often used to stabilize the vesicles or to control the rheological properties of these formulations. The hydrophobic groups are expected to insert themselves into the vesicle bilayers. Recent experimental work shows that hydrophobically modified polymers may from bridges between vesicles or may bridge between layers of a single vesicle. The latter configuration forces an interlayer spacing roughly equal to the radius of gyration of the backbone between associative groups. We have performed simple mean-field calculations on ideal telechelic associative polymers between concentric spherical surfaces. We find that the free energy per chain has an attractive minimum when the layer spacing is approximately N^1/2l, which is consistent with experimental results. The depth of the minimum depends on both chain length and curvature, and as expected when the curvature becomes small, the result for telechelic chains between flat surfaces is recovered.

New formulation of the discrete element method

NASA Astrophysics Data System (ADS)

Rojek, Jerzy; Zubelewicz, Aleksander; Madan, Nikhil; Nosewicz, Szymon

2018-01-01

A new original formulation of the discrete element method based on the soft contact approach is presented in this work. The standard DEM has heen enhanced by the introduction of the additional (global) deformation mode caused by the stresses in the particles induced by the contact forces. Uniform stresses and strains are assumed for each particle. The stresses are calculated from the contact forces. The strains are obtained using an inverse constitutive relationship. The strains allow us to obtain deformed particle shapes. The deformed shapes (ellipses) are taken into account in contact detection and evaluation of the contact forces. A simple example of a uniaxial compression of a rectangular specimen, discreti.zed with equal sized particles is simulated to verify the DDEM algorithm. The numerical example shows that a particle deformation changes the particle interaction and the distribution of forces in the discrete element assembly. A quantitative study of micro-macro elastic properties proves the enhanced capabilities of the DDEM as compared to standard DEM.

Evaluating the administration costs of biologic drugs: development of a cost algorithm.

PubMed

Tetteh, Ebenezer K; Morris, Stephen

2014-12-01

Biologic drugs, as with all other medical technologies, are subject to a number of regulatory, marketing, reimbursement (financing) and other demand-restricting hurdles applied by healthcare payers. One example is the routine use of cost-effectiveness analyses or health technology assessments to determine which medical technologies offer value-for-money. The manner in which these assessments are conducted suggests that, holding all else equal, the economic value of biologic drugs may be determined by how much is spent on administering these drugs or trade-offs between drug acquisition and administration costs. Yet, on the supply-side, it seems very little attention is given to how manufacturing and formulation choices affect healthcare delivery costs. This paper evaluates variations in the administration costs of biologic drugs, taking care to ensure consistent inclusion of all relevant cost resources. From this, it develops a regression-based algorithm with which manufacturers could possibly predict, during process development, how their manufacturing and formulation choices may impact on the healthcare delivery costs of their products.

A constrained maximization formulation to analyze deformation of fiber reinforced elastomeric actuators

NASA Astrophysics Data System (ADS)

Singh, Gaurav; Krishnan, Girish

2017-06-01

Fiber reinforced elastomeric enclosures (FREEs) are soft and smart pneumatic actuators that deform in a predetermined fashion upon inflation. This paper analyzes the deformation behavior of FREEs by formulating a simple calculus of variations problem that involves constrained maximization of the enclosed volume. The model accurately captures the deformed shape for FREEs with any general fiber angle orientation, and its relation with actuation pressure, material properties and applied load. First, the accuracy of the model is verified with existing literature and experiments for the popular McKibben pneumatic artificial muscle actuator with two equal and opposite families of helically wrapped fibers. Then, the model is used to predict and experimentally validate the deformation behavior of novel rotating-contracting FREEs, for which no prior literature exist. The generality of the model enables conceptualization of novel FREEs whose fiber orientations vary arbitrarily along the geometry. Furthermore, the model is deemed to be useful in the design synthesis of fiber reinforced elastomeric actuators for general axisymmetric desired motion and output force requirement.

Nonlinear programming extensions to rational function approximation methods for unsteady aerodynamic forces

NASA Technical Reports Server (NTRS)

Tiffany, Sherwood H.; Adams, William M., Jr.

1988-01-01

The approximation of unsteady generalized aerodynamic forces in the equations of motion of a flexible aircraft are discussed. Two methods of formulating these approximations are extended to include the same flexibility in constraining the approximations and the same methodology in optimizing nonlinear parameters as another currently used extended least-squares method. Optimal selection of nonlinear parameters is made in each of the three methods by use of the same nonlinear, nongradient optimizer. The objective of the nonlinear optimization is to obtain rational approximations to the unsteady aerodynamics whose state-space realization is lower order than that required when no optimization of the nonlinear terms is performed. The free linear parameters are determined using the least-squares matrix techniques of a Lagrange multiplier formulation of an objective function which incorporates selected linear equality constraints. State-space mathematical models resulting from different approaches are described and results are presented that show comparative evaluations from application of each of the extended methods to a numerical example.

Biosurfactants in cosmetic formulations: trends and challenges.

PubMed

Vecino, X; Cruz, J M; Moldes, A B; Rodrigues, L R

2017-11-01

Cosmetic products play an essential role in everyone's life. People everyday use a large variety of cosmetic products such as soap, shampoo, toothpaste, deodorant, skin care, perfume, make-up, among others. The cosmetic industry encompasses several environmental, social and economic impacts that are being addressed through the search for more efficient manufacturing techniques, the reduction of waste and emissions and the promotion of personal hygiene, contributing to an improvement of public health and at the same time providing employment opportunities. The current trend among consumers is the pursuit for natural ingredients in cosmetic products, as many of these products exhibit equal, better or additional benefits in comparison with the chemical-based products. In this sense, biosurfactants are natural compounds with great potential in the formulation of cosmetic products given by their biodegradability and impact in health. Indeed, many of these biosurfactants could exhibit a "prebiotic" character. This review covers the current state-of-the-art of biosurfactant research for cosmetic purposes and further discusses the future challenges for cosmetic applications.

The reduced space Sequential Quadratic Programming (SQP) method for calculating the worst resonance response of nonlinear systems

NASA Astrophysics Data System (ADS)

Liao, Haitao; Wu, Wenwang; Fang, Daining

2018-07-01

A coupled approach combining the reduced space Sequential Quadratic Programming (SQP) method with the harmonic balance condensation technique for finding the worst resonance response is developed. The nonlinear equality constraints of the optimization problem are imposed on the condensed harmonic balance equations. Making use of the null space decomposition technique, the original optimization formulation in the full space is mathematically simplified, and solved in the reduced space by means of the reduced SQP method. The transformation matrix that maps the full space to the null space of the constrained optimization problem is constructed via the coordinate basis scheme. The removal of the nonlinear equality constraints is accomplished, resulting in a simple optimization problem subject to bound constraints. Moreover, second order correction technique is introduced to overcome Maratos effect. The combination application of the reduced SQP method and condensation technique permits a large reduction of the computational cost. Finally, the effectiveness and applicability of the proposed methodology is demonstrated by two numerical examples.

Ligand reorganization and activation energies in nonadiabatic electron transfer reactions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu Jianjun; Wang Jianji; Stell, George

2006-10-28

The activation energy and ligand reorganization energy for nonadiabatic electron transfer reactions in chemical and biological systems are investigated in this paper. The free energy surfaces and the activation energy are derived exactly in the general case in which the ligand vibration frequencies are not equal. The activation energy is derived by free energy minimization at the transition state. Our formulation leads to the Marcus-Hush [J. Chem. Phys. 24, 979 (1956); 98, 7170 (1994); 28, 962 (1958)] results in the equal-frequency limit and also generalizes the Marcus-Sumi [J. Chem. Phys. 84, 4894 (1986)] model in the context of studying themore » solvent dynamic effect on electron transfer reactions. It is found that when the ligand vibration frequencies are different, the activation energy derived from the Marcus-Hush formula deviates by 5%-10% from the exact value. If the reduced reorganization energy approximation is introduced in the Marcus-Hush formula, the result is almost exact.« less

Estimating Variances of Horizontal Wind Fluctuations in Stable Conditions

NASA Astrophysics Data System (ADS)

Luhar, Ashok K.

2010-05-01

Information concerning the average wind speed and the variances of lateral and longitudinal wind velocity fluctuations is required by dispersion models to characterise turbulence in the atmospheric boundary layer. When the winds are weak, the scalar average wind speed and the vector average wind speed need to be clearly distinguished and both lateral and longitudinal wind velocity fluctuations assume equal importance in dispersion calculations. We examine commonly-used methods of estimating these variances from wind-speed and wind-direction statistics measured separately, for example, by a cup anemometer and a wind vane, and evaluate the implied relationship between the scalar and vector wind speeds, using measurements taken under low-wind stable conditions. We highlight several inconsistencies inherent in the existing formulations and show that the widely-used assumption that the lateral velocity variance is equal to the longitudinal velocity variance is not necessarily true. We derive improved relations for the two variances, and although data under stable stratification are considered for comparison, our analysis is applicable more generally.

Mainstreaming gender equality in the sustainable development process: 1992-1996.

PubMed

1997-01-01

One of the major contributions of Economic Commission for Africa (ECA) in the mainstreaming of gender equality into a sustainable development process was organizing the 5th African Regional Conference on Women in November 1994, in which a comprehensive policy document was formulated and adopted by all African governments. The policy contained in a document entitled the African Platform for Action (APA), which promotes the advancement of women through sustainable development. Its recommendations are being implemented together with the Global Platform for Action (GPA). To ensure the implementation of APA and GPA, ECA has set up various monitoring and implementation-coordinating groups such as the African Regional Coordinating Committee and the African Women's Communications and Development Network. In addition, ECA also facilitated the creation of the African Women Committee for Peace in November 1996, which will ensure the participation of women in the peace process at the highest level. All work programs of the ECA are expected to mainstream gender in their plans and activities.

Acoustic field in unsteady moving media

NASA Technical Reports Server (NTRS)

Bauer, F.; Maestrello, L.; Ting, L.

1995-01-01

In the interaction of an acoustic field with a moving airframe the authors encounter a canonical initial value problem for an acoustic field induced by an unsteady source distribution, q(t,x) with q equivalent to 0 for t less than or equal to 0, in a medium moving with a uniform unsteady velocity U(t)i in the coordinate system x fixed on the airframe. Signals issued from a source point S in the domain of dependence D of an observation point P at time t will arrive at point P more than once corresponding to different retarded times, Tau in the interval (0, t). The number of arrivals is called the multiplicity of the point S. The multiplicity equals 1 if the velocity U remains subsonic and can be greater when U becomes supersonic. For an unsteady uniform flow U(t)i, rules are formulated for defining the smallest number of I subdomains V(sub i) of D with the union of V(sub i) equal to D. Each subdomain has multiplicity 1 and a formula for the corresponding retarded time. The number of subdomains V(sub i) with nonempty intersection is the multiplicity m of the intersection. The multiplicity is at most I. Examples demonstrating these rules are presented for media at accelerating and/or decelerating supersonic speed.

Assessment of antifungal activity of herbal and conventional toothpastes against clinical isolates of Candida albicans.

PubMed

Adwan, Ghaleb; Salameh, Yousef; Adwan, Kamel; Barakat, Ali

2012-05-01

To detect the anticandidal activity of nine toothpastes containing sodium fluoride, sodium monofluorophosphate and herbal extracts as an active ingredients against 45 oral and non oral Candida albicans (C. albicans) isolates. The antifungal activity of these toothpaste formulations was determined using a standard agar well diffusion method. Statistical analysis was performed using a statistical package, SPSS windows version 15, by applying mean values using one-way ANOVA with post-hoc least square differences (LSD) method. A P value of less than 0.05 was considered significant. All toothpastes studied in our experiments were effective in inhibiting the growth of all C. albicans isolates. The highest anticandidal activity was obtained from toothpaste that containing both herbal extracts and sodium fluoride as active ingredients, while the lowest activity was obtained from toothpaste containing sodium monofluorophosphate as an active ingredient. Antifungal activity of Parodontax toothpaste showed a significant difference (P< 0.001) against C. albicans isolates compared to toothpastes containing sodium fluoride or herbal products. In the present study, it has been demonstrated that toothpaste containing both herbal extracts and sodium fluoride as active ingredients are more effective in control of C. albicans, while toothpaste that containing monofluorophosphate as an active ingredient is less effective against C. albicans. Some herbal toothpaste formulations studied in our experiments, appear to be equally effective as the fluoride dental formulations and it can be used as an alternative to conventional formulations for individuals who have an interest in naturally-based products. Our results may provide invaluable information for dental professionals.

Assessment of antifungal activity of herbal and conventional toothpastes against clinical isolates of Candida albicans

PubMed Central

Adwan, Ghaleb; Salameh, Yousef; Adwan, Kamel; Barakat, Ali

2012-01-01

Objective To detect the anticandidal activity of nine toothpastes containing sodium fluoride, sodium monofluorophosphate and herbal extracts as an active ingredients against 45 oral and non oral Candida albicans (C. albicans) isolates. Methods The antifungal activity of these toothpaste formulations was determined using a standard agar well diffusion method. Statistical analysis was performed using a statistical package, SPSS windows version 15, by applying mean values using one-way ANOVA with post-hoc least square differences (LSD) method. A P value of less than 0.05 was considered significant. Results All toothpastes studied in our experiments were effective in inhibiting the growth of all C. albicans isolates. The highest anticandidal activity was obtained from toothpaste that containing both herbal extracts and sodium fluoride as active ingredients, while the lowest activity was obtained from toothpaste containing sodium monofluorophosphate as an active ingredient. Antifungal activity of Parodontax toothpaste showed a significant difference (P< 0.001) against C. albicans isolates compared to toothpastes containing sodium fluoride or herbal products. Conclusions In the present study, it has been demonstrated that toothpaste containing both herbal extracts and sodium fluoride as active ingredients are more effective in control of C. albicans, while toothpaste that containing monofluorophosphate as an active ingredient is less effective against C. albicans. Some herbal toothpaste formulations studied in our experiments, appear to be equally effective as the fluoride dental formulations and it can be used as an alternative to conventional formulations for individuals who have an interest in naturally-based products. Our results may provide invaluable information for dental professionals. PMID:23569933

Heterogeneity in the pharmacodynamics of two long-acting methylphenidate formulations for children with attention deficit/hyperactivity disorder. A growth mixture modelling analysis.

PubMed

Sonuga-Barke, Edmund J S; Van Lier, Pol; Swanson, James M; Coghill, David; Wigal, Sharon; Vandenberghe, Mieke; Hatch, Simon

2008-06-01

To use growth mixture modelling (GMM) to identify subgroups of children with attention deficit hyperactive disorder (ADHD) who have different pharmacodynamic profiles in response to extended release methylphenidate as assessed in a laboratory classroom setting. GMM analysis was performed on data from the COMACS study (Comparison of Methylphenidates in the Analog Classroom Setting): a large (n = 184) placebo-controlled cross-over study comparing three treatment conditions in the Laboratory School Protocol (with a 1.5-h cycle of attention and deportment assessments). Two orally administered, once-daily methylphenidate (MPH) bioequivalent formulations [Metadate CD/Equasym XL (MCD-EQXL) and Concerta XL (CON)] were compared with placebo (PLA). Three classes of children with distinct severity profiles in the PLA condition were identified. For both MCD-EQXL and CON, the more severe their PLA symptoms the better, the children's response. However, the formulations produced different growth curves by class, with CON having essentially a flat profile for all three classes (i.e. no effect of PLA severity) and MCD-EQXL showing a marked decline in symptoms immediately post-dosing in the two most severe classes compared with the least severe. Comparison of daily doses matched for immediate-release (IR) components accounted for this difference. The results suggest considerable heterogeneity in the pharmacodynamics of MPH response by children with ADHD. When treatment response for near-equal, bioequivalent daily doses the two formulations was compared, marked differences were seen for children in the most severe classes with a strong curvilinear trajectory for MCD-EQXL related to the greater IR component.

An Additive to Improve the Wear Characteristics of Perfluoropolyether Based Greases

NASA Technical Reports Server (NTRS)

Jones, David G. V.; Fowzy, Mahmoud A.; Landry, James F.; Jones, William R., Jr.; Shogrin, Bradley A.; Nguyen, QuynhGiao

1999-01-01

The friction and wear characteristics of two formulated perfluoropolyether based greases were compared to their non-additive base greases. One grease was developed for the electronics industry (designated as GXL-296A) while the other is for space applications (designated as GXL-320A). The formulated greases (GXL-296B and GXL-320B) contained a proprietary antiwear additive at an optimized concentration. Tests were conducted using a vacuum four-ball tribometer. AISI 52100 steel specimens were used for all GXL-296 tests. Both AISI 52100 steel and 440C stainless steel were tested with the GXL-320 greases. Test conditions included: a pressure less than 6.7 x 10(exp )-4 Pa, a 200N load, a sliding velocity of 28.8 mm/sec (100 rpm) and room temperature (approximately equal to 23 C). Wear rates for each grease were determined from the slope of the wear volume as a function of sliding distance. Both non-additive base greases yielded relatively high wear rates on the order of 10(exp -8) cu mm using AISI 52100 steel specimens. Formulated grease GXL-296B yielded a reduction in wear rate by a factor of approximately 21, while grease GXL-320B had a reduction of approximately 12 times. Lower wear rates (-50%) were observed with both GXL-320 greases using 440C stainless steel. Mean friction coefficients were slightly higher for both formulated greases compared to their base greases. The GXL-296 series (higher base oil viscosity) yielded much higher friction coefficients compared to their GXL-320 series (lower base oil viscosity) counterparts.

Electrohydrodynamic deformation and interaction of a pair of emulsion drops

NASA Technical Reports Server (NTRS)

Baygents, James C.

1994-01-01

The response of a pair of emulsion drops to the imposition of a uniform electric field is examined. The case studied is that of equal-sized drops whose line of centers is parallel to the axis of the applied field. A new boundary integral solution to the governing equations of the leaky dielectric model is developed; the formulation accounts for the electrostatic and hydrodynamic interactions between the drops, as well as their deformations. Numerical calculations show that, after an initial transient during which the drops primarily deform, the pair drift slowly together due to their electrostatic interactions.

Paternal/maternal attachment, peer support, social expectations of peer interaction, and depressive symptoms.

PubMed

Liu, Yih-Lan

2006-01-01

The aim of this study was to investigate how paternal and maternal attachment might relate to adolescents' peer support, social expectations of peer interaction, and depressive symptoms; 1,144 8th graders in Taiwan participated in the study. The relationships were examined through a structural equating modeling. Consistent with theoretical formulations, adolescents with secure attachments to parents reported higher peer support, fewer negative expectations, and fewer depressive symptoms. Paternal and maternal attachment contribute almost equally to adolescents' social expectations of peer interaction and depressive symptoms. Attachment to the same-sex parent was related to adolescents' perceived peer support.

The coupled three-dimensional wave packet approach to reactive scattering

NASA Astrophysics Data System (ADS)

Marković, Nikola; Billing, Gert D.

1994-01-01

A recently developed scheme for time-dependent reactive scattering calculations using three-dimensional wave packets is applied to the D+H2 system. The present method is an extension of a previously published semiclassical formulation of the scattering problem and is based on the use of hyperspherical coordinates. The convergence requirements are investigated by detailed calculations for total angular momentum J equal to zero and the general applicability of the method is demonstrated by solving the J=1 problem. The inclusion of the geometric phase is also discussed and its effect on the reaction probability is demonstrated.

Simulation of 3-D viscous compressible flow in multistage turbomachinery by finite element methods

NASA Astrophysics Data System (ADS)

Sleiman, Mohamad

1999-11-01

The flow in a multistage turbomachinery blade row is compressible, viscous, and unsteady. Complex flow features such as boundary layers, wake migration from upstream blade rows, shocks, tip leakage jets, and vortices interact together as the flow convects through the stages. These interactions contribute significantly to the aerodynamic losses of the system and degrade the performance of the machine. The unsteadiness also leads to blade vibration and a shortening of its life. It is therefore difficult to optimize the design of a blade row, whether aerodynamically or structurally, in isolation, without accounting for the effects of the upstream and downstream rows. The effects of axial spacing, blade count, clocking (relative position of follow-up rotors with respect to wakes shed by upstream ones), and levels of unsteadiness may have a significance on performance and durability. In this Thesis, finite element formulations for the simulation of multistage turbomachinery are presented in terms of the Reynolds-averaged Navier-Stokes equations for three-dimensional steady or unsteady, viscous, compressible, turbulent flows. Three methodologies are presented and compared. First, a steady multistage analysis using a a-mixing- plane model has been implemented and has been validated against engine data. For axial machines, it has been found that the mixing plane simulation methods match very well the experimental data. However, the results for a centrifugal stage, consisting of an impeller followed by a vane diffuser of equal pitch, show flagrant inconsistency with engine performance data, indicating that the mixing plane method has been found to be inappropriate for centrifugal machines. Following these findings, a more complete unsteady multistage model has been devised for a configuration with equal number of rotor and stator blades (equal pitches). Non-matching grids are used at the rotor-stator interface and an implicit interpolation procedure devised to ensure continuity of fluxes across. This permits the rotor and stator equations to be solved in a fully- coupled manner, allowing larger time steps in attaining a time-periodic solution. This equal pitch approach has been validated on the complex geometry of a centrifugal stage. Finally, for a stage configuration with unequal pitches, the time-inclined method, developed by Giles (1991) for 2-D viscous compressible flow, has been extended to 3-D and formulated in terms of the physical solution vector U, rather than Q, a non-physical one. The method has been evaluated for unsteady flow through a rotor blade passage of the power turbine of a turboprop.

Stability and in vitro toxicity of an infliximab eye drop formulation.

PubMed

Robert, Marie-Claude; Spurr-Michaud, Sandra; Frenette, Mathieu; Young, David; Gipson, Ilene K; Dohlman, Claes H

2014-01-01

The purpose of this study was to develop a novel 10-mg/mL infliximab eye drop, to characterize its physical and biological stability under recommended storage conditions, and to assess the formulation's toxicity to ocular surface epithelium in vitro. Infliximab (10 mg/mL) was reconstituted using equal volumes of sterile water and 1% carboxymethylcellulose artificial tears. Aliquots were stored in either a 4 degrees C refrigerator or -20 degrees C freezer for up to 45 days. Physical stability was assessed through monitoring the solution's appearance, pH, ultraviolet-visible-near infrared absorbance and scattering, as well as protein gel electrophoresis. Biological stability was assayed through binding to tumor necrosis factor-alpha using an enzyme-linked immunosorbent assay. In vitro cytotoxicity to human corneal-limbal epithelial cells was examined following a 4-hour exposure to the study drug. Refrigerated and frozen infliximab eye drops remained clear and colorless for the duration of study. The formulation's pH (7.0) was comparable to that of the artificial tear vehicle alone. Low levels of ultraviolet-visible-near infrared light absorbance and scattering established the lack of protein precipitate after refrigeration or freezing. Protein gel electrophoresis performed under reducing conditions revealed the presence of two main protein bands of approximately 50 kDa and 25 kDa, representing immunoglobulin G heavy and light chains. The migration pattern of the proteins did not change under the different storage conditions and between day 10 and 45 after formulation. Infliximab binding to tumor necrosis factor-alpha remained stable for up to 45 days, with conservation of 101% and 102% of its initial binding activity when refrigerated or frozen, respectively. In vitro human corneal-limbal epithelial cultures showed no increase in cytotoxicity with infliximab treatment when compared to vehicle and culture media controls (P > 0.05). Infliximab can be formulated as an eye drop and remains stable when stored in accordance with current regulations regarding compounded eye drops. The demonstrated physical and biological stability as well as in vitro innocuity of this infliximab eye drop formulation may facilitate future clinical investigation targeting tumor necrosis factor-alpha as a modulator of various ocular surface diseases.

Clinical experience with pantoprazole in gastroesophageal reflux disease.

PubMed

Avner, D L

2000-10-01

Pantoprazole is a new proton pump inhibitor indicated for the treatment of erosive esophagitis associated with gastroesophageal reflux disease (GERD) and is available in both oral and intravenous (IV) formulations. This paper reviews the pharmacologic properties of pantoprazole and summarizes the findings from clinical studies of this drug. This review was compiled from the published literature, abstracts from clinical trials, and data on file with the manufacturer of pantoprazole. Pantoprazole selectively accumulates in the acidic environment of gastric parietal cells and acts at the final step of acid secretion by binding 2 key cysteine residues of the proton pump involved in gastric acid production. The bioavailability of pantoprazole is not altered by concomitant administration of food or antacids or with repeated dosing. Both oral and IV formulations of pantoprazole exhibit linear pharmacokinetics. Several clinical trials have proved pantoprazole superior to histamine-2-receptor antagonists (H2RAs) in reducing acid secretion and elevating gastric pH levels. Pantoprazole has been shown to be more effective than ranitidine (P < 0.05), famotidine (P < 0.001), and nizatidine (P < 0.05), and at least as effective as omeprazole, in healing erosive esophagitis and relieving associated symptoms of GERD, including regurgitation. Pantoprazole is also more effective than the H2RA nizatidine for the treatment of nighttime heartburn (P < 0.05). Studies have shown pantoprazole to be well tolerated; adverse events, including headache, diarrhea, flatulence, abdominal pain, eructation, nausea, and rash, occurred in < or = 6% of patients. The oral and IV formulations of pantoprazole are equally potent in inhibiting gastric acid secretion; thus, switching between formulations requires no dosage adjustments. Special patient populations, including the elderly and patients with renal or mild to moderate hepatic impairment, can take pantoprazole without an adjustment in dosage. Because of its unique pharmacokinetic properties, mechanism of action, and reduced potential for producing cytochrome P-450-based drug interactions, pantoprazole in both oral and IV formulations is effective over a full 24 hours and is well tolerated in a variety of patient types.

The relation between the Gross Pitaevskii and Bogoliubov descriptions of a dilute Bose gas

NASA Astrophysics Data System (ADS)

Leggett, A. J.

2003-07-01

I formulate a 'pseudo-paradox' in the theory of a dilute Bose gas with repulsive interactions: the standard expression for the ground state energy within the Gross-Pitaevskii (GP) approximation is lower than that in the Bogoliubov approximation, and hence, by the standard variational argument, the former should prima facie be a better approximation than the latter to the true ground state—a conclusion which is of course opposite to the established wisdom concerning this problem. It is shown that the pseudo-paradox is (unsurprisingly) resolved by a correct transcription of the two-body scattering theory to the many-body case; however, contrary to what appears to be a widespread belief, the resolution has nothing to do with any spurious ultraviolet divergences which result from the replacement of the true interatomic potential by a delta-function pseudopotential. Rather, it relates to an infrared divergence which has the consequence that (a) the most obvious form of the GP 'approximation' actually does not correspond to any well-defined ansatz for the many-body wavefunction, and (b) that the 'best shot' at such a wavefunction always produces an energy which exceeds, or at best equals, that calculated in the Bogoliubov approximation. In fact, the necessity of the latter may be seen as a consequence of the need to reduce the Fock term in the energy, which is absent in the two-particle problem but dominant in the many-body case; it does this by increasing the density correlations, at distances less than or approximately equal to the correlation length \\xi , above the value extrapolated from the two-body case. As a by-product I devise an alternative formulation of the Bogoliubov approximation which does not require the explicit replacement of the true interatomic potential by a delta-function pseudopotential.

On the phase lag of turbulent dissipation in rotating tidal flows

NASA Astrophysics Data System (ADS)

Zhang, Qianjiang; Wu, Jiaxue

2018-03-01

Field observations of rotating tidal flows in a shallow tidally swept sea reveal that a notable phase lag of both shear production and turbulent dissipation increases with height above the seafloor. These vertical delays of turbulent quantities are approximately equivalent in magnitude to that of squared mean shear. The shear production approximately equals turbulent dissipation over the phase-lag column, and thus a main mechanism of phase lag of dissipation is mean shear, rather than vertical diffusion of turbulent kinetic energy. By relating the phase lag of dissipation to that of the mean shear, a simple formulation with constant eddy viscosity is developed to describe the phase lag in rotating tidal flows. An analytical solution indicates that the phase lag increases linearly with height subjected to a combined effect of tidal frequency, Coriolis parameter and eddy viscosity. The vertical diffusion of momentum associated with eddy viscosity produces the phase lag of squared mean shear, and resultant delay of turbulent quantities. Its magnitude is inhibited by Earth's rotation. Furthermore, a theoretical formulation of the phase lag with a parabolic eddy viscosity profile can be constructed. A first-order approximation of this formulation is still a linear function of height, and its magnitude is approximately 0.8 times that with constant viscosity. Finally, the theoretical solutions of phase lag with realistic viscosity can be satisfactorily justified by realistic phase lags of dissipation.

In-vitro activity of sodium-hypochlorite gel on bacteria associated with periodontitis.

PubMed

Jurczyk, Karolina; Nietzsche, Sandor; Ender, Claudia; Sculean, Anton; Eick, Sigrun

2016-11-01

The aim of the present study was to assess the antimicrobial activity of a sodium hypochlorite formulation including its components against bacteria associated with periodontal disease. Sodium hypochlorite formulation (NaOCl gel), its components sodium hypochlorite (NaOCl), and the activating vehicle were compared with 0.1 % chlorhexidine digluconate (CHX) solution. The antimicrobial activity was proven by determination of minimal inhibitory concentrations (MIC), minimal bactericidal concentrations, and killing assays. Furthermore, the influence on formation as well as on a 4-day-old 6-species biofilm was tested. Except for one strain (Parvimonas micra ATCC 33270 in case of NaOCl gel), the MICs both of the CHX solution and NaOCl gel did not exceed 10 % of the formulations' concentration. In general, MICs of the NaOCl gel were equal as of the CHX solution against Gram-negatives but higher against Gram-positive bacteria. CHX but not NaOCl gel clearly inhibited biofilm formation; however, the activity of NaOCl gel was more remarkable on a 4-day-old biofilm. NaOCl killed bacteria in the biofilm and interfered with the matrix. The NaOCl gel acts antimicrobial in particular against Gram-negative species associated with periodontitis. Moreover, its component NaOCl hypochlorite is able to alter biofilm matrices. The NaOCl gel may represent a potential alternative for adjunctive topical antimicrobial treatment in periodontitis.

Efficacy of an herbal formulation LI10903F containing Dolichos biflorus and Piper betle extracts on weight management.

PubMed

Sengupta, Krishanu; Mishra, Atmatrana T; Rao, Manikeshwar K; Sarma, Kadainti Vs; Krishnaraju, Alluri V; Trimurtulu, Golakoti

2012-12-27

A novel herbal formulation LI10903F, alternatively known as LOWAT was developed based on its ability to inhibit adipogenesis and lipogenesis in 3T3-L1 adipocytes model. The clinical efficacy and tolerability of LI10903F were evaluated in an eight-week, randomized, double-blind, placebo-controlled, clinical trial in 50 human subjects with body mass index (BMI) between 30 and 40 kg/m² (clinical trial registration number: ISRCTN37381706). Participants were randomly assigned to either a placebo or LI10903F group. Subjects in the LI10903F group received 300 mg of herbal formulation thrice daily, while subjects in the placebo group received 300 mg of placebo capsules thrice daily. All subjects were provided a standard diet (2,000 kcal daily) and participated in a moderate exercise of 30 min walk for five days a week. Additionally, the safety of this herbal formulation was evaluated by a series of acute, sub-acute toxicity and genotoxicity studies in animals and cellular models. After eight weeks of supplementation, statistically significant net reductions in body weight (2.49 kg; p=0.00005) and BMI (0.96 kg/m²; p=0.00004) were observed in the LI10903F group versus placebo group. Additionally, significant increase in serum adiponectin concentration (p=0.0076) and significant decrease in serum ghrelin concentration (p=0.0066) were found in LI10903F group compared to placebo group. Adverse events were mild and were equally distributed between the two groups. Interestingly, LI10903F showed broad spectrum safety in a series of acute, sub-acute toxicity and genotoxicity studies. Results from the current research suggest that LI10903F or LOWAT is well-tolerated, safe and effective for weight management.

Beyond Yellow Curry: Assessing Commercial Curcumin Absorption Technologies.

PubMed

Douglass, Brad J; Clouatre, Dallas L

2015-01-01

Few natural products have demonstrated the range of protective and therapeutic promise as have turmeric and its principal bioactive components: curcumin, demethoxycurcumin, and bisdemethoxycurcumin. Success in translating this potential into tangible benefits has been limited by inherently poor intestinal absorption, rapid metabolism, and limited systemic bioavailability. Seeking to overcome these limitations, food ingredient formulators have begun to employ a variety of approaches to enhance absorption and bioactivity. Many of these strategies improve upon the age-old practice of consuming turmeric in fat-based sauces, such as in a fat-rich yellow curry. However, there exists uncertainty as to how the various commercially available offerings compare to each other in terms of either uptake or efficacy, and this uncertainty leaves physicians and nutritionists with a dearth of data for making recommendations to interested patients and consumers. Further complicating the issue are recent data suggesting that formulation strategies may not equally enhance the absorption of individual curcuminoids, a significant issue in that these curcuminoids exhibit somewhat different physiologic properties. This review introduces needed order to the curcumin marketplace by examining bioavailability studies on a number of commercial curcumin ingredients and evaluating them on a level playing field. The comparative analysis includes standard pharmacokinetic parameters and a new metric, relative mass efficiency (E). Relative mass efficiency allows for the comparison of different formulations even in cases in which the weight percentage of curcuminoids is vastly different. A hydrophilic carrier dispersed curcuminoid formula exhibits 45.9 times the bioavailability of the standard purified 95 percent curcuminoid preparation and, based on relative mass efficiency, 1.5 times the bioavailability of the next best commercial ingredient, a cyclodextrin complex. Delivery strategies can significantly improve the bioavailability of curcuminoids. Total formula mass is important for making practical formulation decisions about dosing, cost and space.

Evaluation of the interaction between sodium hypochlorite and several formulations containing chlorhexidine and its effect on the radicular dentin--SEM and push-out bond strength analysis.

PubMed

Graziele Magro, Miriam; Kuga, Milton Carlos; Regina Victorino, Keli; Vázquez-Garcia, Fernando Antonio; Aranda-Garcia, Arturo Javier; Faria-Junior, Norberto Batista; Faria, Gisele; Luis Shinohara, André

2014-01-01

The aim of the current study was to evaluate the presence of debris and smear layer after endodontic irrigation with different formulations of 2% chlorhexidine gluconate (CHX) and its effects on the push-out bond strength of an epoxy-based sealer on the radicular dentin. One hundred extracted human canines were prepared to F5 instrument and irrigated with 2.5% sodium hypochlorite and 17% ethylenediaminetetraacetic acid. Fifty teeth were divided into five groups (n = 10), according to the final irrigation protocol with different 2% CHX formulations: G1 (control, no final rinse irrigation), G2 (CHX solution), G3 (CHX gel), G4 (Concepsis), and G5 (CHX Plus). In sequence, the specimens were submitted to scanning electron microscopy (SEM) analysis, in the cervical-medium and medium-apical segments, to evaluate the presence of debris and smear layer. The other 50 teeth were treated equally to a SEM study, but with the root canals filled with an epoxy-based endodontic sealer and submitted to a push-out bond strength test, in the cervical, middle, and apical thirds. G2, G3, G4, and G5 provided higher precipitation of the debris and smear layer than G1 (P < 0.05), but these groups were similar to each other (P > 0.05), in both segments. The values obtained in the push out test did not differ between groups, independent of the radicular third (P > 0.05). The CHXs formulations caused precipitation of the debris and smear layer on the radicular dentin, but these residues did not interfere in the push-out bond strength of the epoxy-based sealer. Copyright © 2013 Wiley Periodicals, Inc.

Safety and clinical effectiveness of a compounded sustained-release formulation of buprenorphine for postoperative analgesia in New Zealand White rabbits.

PubMed

DiVincenti, Louis; Meirelles, Luiz A D; Westcott, Robin A

2016-04-01

To determine the clinical effectiveness and safety of a compounded sustained-release formulation of buprenorphine, compared with effects of regular buprenorphine, for postoperative analgesia in rabbits. Blinded randomized controlled clinical trial. 24 purpose-bred adult male New Zealand White rabbits. Rabbits received titanium implants in each tibia as part of another study. Immediately prior to surgery, each rabbit received regular buprenorphine hydrochloride (0.02 mg/kg [0.009 mg/lb], SC, q 12 h for 3 days) or 1 dose of a compounded sustained-release formulation of buprenorphine (0.12 mg/kg [0.055 mg/lb], SC) followed by an equal volume of saline (0.9% NaCl) solution (SC, q 12 h for 3 days) after surgery. For 7 days after surgery, rabbits were evaluated for signs of pain by means of rabbit grimace and activity scoring and for adverse effects. No significant differences were identified between treatment groups in grimace and activity scores at any point. No major adverse effects were detected for either drug. However, 3 rabbits that received regular buprenorphine had pain scores suggestive of moderate to severe pain by the time dose administration was due (ie, within the 12-hour administration interval). No clinically important differences were detected in intraoperative anesthetic or postoperative recovery variables. Sustained-release buprenorphine administered SC at 0.12 mg/kg was at least as effective as regular buprenorphine in providing analgesia for rabbits following orthopedic surgery without any major adverse effects. This sustained-release formulation represents an important alternative for rabbit analgesia with potential to improve rabbit welfare over existing analgesic standards.

Methylphenidate and dexmethylphenidate formulations for children with attention-deficit/hyperactivity disorder.

PubMed

Sugrue, David; Bogner, Robin; Ehret, Megan J

2014-07-15

Current literature on the safety and efficacy of various intermediate- and long-acting preparations of methylphenidate and dexmethylphenidate for pediatric attention-deficit/hyperactivity disorder (ADHD) is reviewed. The efficacy of methylphenidate in controlling ADHD symptoms is firmly established. Given the drug's relatively short half-life in pediatric patients (about 2.5 hours), a number of intermediate- and long-acting products have been developed; these extended-release methylphenidate products provide the same efficacy as immediate-release (IR) formulations, with the convenience of less frequent dosing. Intermediate-acting methylphenidate preparations have effects lasting as long as 8 hours, but peak concentrations are not attained for up to 5 hours, and many patients may require twice-daily dosing. Long-acting methylphenidate products developed to address these challenges include a controlled-release tablet and bimodal-delivery capsules containing mixtures of IR and extended-release beads (durations of effect, 8-12 hours). Options for patients with difficulty swallowing tablets or capsules include a once-daily transdermal delivery system and a once-daily liquid formulation. Dexmethylphenidate (the more pharmacologically active d-isomer of racemic methylphenidate) can provide efficacy comparable to that of IR methylphenidate at half the dose; an extended-release form of dexmethylphenidate can provide less fluctuation in peak and trough concentrations than the IR form. Methylphenidate and dexmethylphenidate products in capsule form can be opened and sprinkled on applesauce. The various formulations of IR and intermediate- and extended-release methylphenidate and dexmethylphenidate can be useful options in satisfying patients' individual needs in the management of ADHD. All are equally efficacious in controlling ADHD symptoms. Copyright © 2014 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Development by extrusion of soyabari snack sticks: a nutritionally improved soya-maize product based on the Nigerian snack (kokoro).

PubMed

Omueti, O; Morton, I D

1996-01-01

A nutritionally improved local snack compared to existing kokoro has been developed by extrusion cooking of different formulations of maize, soybean and condiments such as pepper, onion, salt, palm oil, plantain and banana. The improved snack was named as the 'soyabari snack stick'. The chemical composition of representative extruded products indicates a high level of crude protein, fat, energy, available lysine and improved in vitro digestibility compared to the usual maize-based products. The level of stachyose and raffinose were greatly reduced in the extruded products compared to raw soya. Formulations using various additives yielded products suitable for different consumers' preferences such as hot, sweet, bland, gritty or crispy and acceptable to taste assessors. Soyabari snack sticks were equally acceptable as Bombay mix, a product on the market in London. Sensory analysis showed no significant differences in the two products but the crude fibre content of Bombay mix was higher while the protein was slightly lower than for soyabari sticks. Local ingredients can produce acceptable extrudates.

Niaouli oils from different sources: analysis and influence on cutaneous permeation of estradiol in vitro.

PubMed

Monti, D; Tampucci, S; Chetoni, P; Burgalassi, S; Bertoli, A; Pistelli, L

2009-07-01

Previous studies in vitro had identified niaouli essential oil (NEO) as a valuable transdermal permeation promoter for estradiol (ES). Subsequent considerations on the complex issue of NEO provenance and composition stimulated the present investigation, which was aimed at defining the composition of NEOs obtained from four different sources, at evaluating their influence on transdermal permeation of ES through hairless mouse skin, and at formulating and evaluating simpler terpene mixtures mimicking the NEOs' composition. While all oils contained 1,8-cineol (eucalyptol) as the main component, appreciable variations in composition could be evidenced, originating differences on the ES cutaneous permeation. Two artificial mixtures containing the same proportions of the main terpenes present in each oil (except the commercially unavailable gamma-terpineol) proved equal or significantly superior in activity when compared with the original oils. It is felt that this study might contribute to the formulation of terpene mixtures acting more efficiently and reproducibly with respect to natural NEOs, whose complex and variable composition, depending on growing place, season, and extraction process, is well documented in the relevant literature.

Optimizing Aerosol Dispensers for Mating Disruption of Codling Moth, Cydia pomonella L.

PubMed

McGhee, Peter S; Miller, James R; Thomson, Donald R; Gut, Larry J

2016-07-01

Experiments were conducted in commercial apple orchards to determine if improved efficiencies in pheromone delivery may be realized by using aerosol pheromone dispensers for codling moth (CM), Cydia pomonella L., mating disruption. Specifically, we tested how reducing: pheromone concentration, period of dispenser operation, and frequency of pheromone emission from aerosol dispensers affected orientational disruption of male CM to pheromone-baited monitoring traps. Isomate® CM MIST formulated with 50 % less codlemone (3.5 mg/ emission) provided orientation disruption equal to the standard commercial formulation (7 mg / emission). Decreased periods of dispenser operation (3 and 6 h) and frequency of pheromone emission (30 and 60 min) provided a level of orientational disruption similar to the current standard protocol of releasing pheromone over a 12 h period on a 15 min cycle, respectively. These three modifications provide a means of substantially reducing the amount of pheromone necessary for CM disruption. The savings accompanying pheromone conservation could lead to increased adoption of CM mating disruption and, moreover, provide an opportunity for achieving higher levels of disruption by increasing dispenser densities.

Applications of Ko Displacement Theory to the Deformed Shape Predictions of the Doubly-Tapered Ikhana Wing

NASA Technical Reports Server (NTRS)

Ko, William L.; Richards, W. Lance; Fleischer, Van Tran

2009-01-01

The Ko displacement theory, formulated for weak nonuniform (slowly changing cross sections) cantilever beams, was applied to the deformed shape analysis of the doubly-tapered wings of the Ikhana unmanned aircraft. The two-line strain-sensing system (along the wingspan) was used for sensing the bending strains needed for the wing-deformed shapes (deflections and cross-sectional twist) analysis. The deflection equation for each strain-sensing line was expressed in terms of the bending strains evaluated at multiple numbers of strain-sensing stations equally spaced along the strain-sensing line. For the preflight shape analysis of the Ikhana wing, the strain data needed for input to the displacement equations for the shape analysis were obtained from the nodal-stress output of the finite-element analysis. The wing deflections and cross-sectional twist angles calculated from the displacement equations were then compared with those computed from the finite-element computer program. The Ko displacement theory formulated for weak nonlinear cantilever beams was found to be highly accurate in the deformed shape predictions of the doubly-tapered Ikhana wing.

Explicit formulation of second and third order optical nonlinearity in the FDTD framework

NASA Astrophysics Data System (ADS)

Varin, Charles; Emms, Rhys; Bart, Graeme; Fennel, Thomas; Brabec, Thomas

2018-01-01

The finite-difference time-domain (FDTD) method is a flexible and powerful technique for rigorously solving Maxwell's equations. However, three-dimensional optical nonlinearity in current commercial and research FDTD softwares requires solving iteratively an implicit form of Maxwell's equations over the entire numerical space and at each time step. Reaching numerical convergence demands significant computational resources and practical implementation often requires major modifications to the core FDTD engine. In this paper, we present an explicit method to include second and third order optical nonlinearity in the FDTD framework based on a nonlinear generalization of the Lorentz dispersion model. A formal derivation of the nonlinear Lorentz dispersion equation is equally provided, starting from the quantum mechanical equations describing nonlinear optics in the two-level approximation. With the proposed approach, numerical integration of optical nonlinearity and dispersion in FDTD is intuitive, transparent, and fully explicit. A strong-field formulation is also proposed, which opens an interesting avenue for FDTD-based modelling of the extreme nonlinear optics phenomena involved in laser filamentation and femtosecond micromachining of dielectrics.

On the Vertical Distribution of Local and Remote Sources of Water for Precipitation

NASA Technical Reports Server (NTRS)

Bosilovich, Michael G.

2001-01-01

The vertical distribution of local and remote sources of water for precipitation and total column water over the United States are evaluated in a general circulation model simulation. The Goddard Earth Observing System (GEOS) general circulation model (GCM) includes passive constituent tracers to determine the geographical sources of the water in the column. Results show that the local percentage of precipitable water and local percentage of precipitation can be very different. The transport of water vapor from remote oceanic sources at mid and upper levels is important to the total water in the column over the central United States, while the access of locally evaporated water in convective precipitation processes is important to the local precipitation ratio. This result resembles the conceptual formulation of the convective parameterization. However, the formulations of simple models of precipitation recycling include the assumption that the ratio of the local water in the column is equal to the ratio of the local precipitation. The present results demonstrate the uncertainty in that assumption, as locally evaporated water is more concentrated near the surface.

Contact-force distribution optimization and control for quadruped robots using both gradient and adaptive neural networks.

PubMed

Li, Zhijun; Ge, Shuzhi Sam; Liu, Sibang

2014-08-01

This paper investigates optimal feet forces' distribution and control of quadruped robots under external disturbance forces. First, we formulate a constrained dynamics of quadruped robots and derive a reduced-order dynamical model of motion/force. Consider an external wrench on quadruped robots; the distribution of required forces and moments on the supporting legs of a quadruped robot is handled as a tip-point force distribution and used to equilibrate the external wrench. Then, a gradient neural network is adopted to deal with the optimized objective function formulated as to minimize this quadratic objective function subjected to linear equality and inequality constraints. For the obtained optimized tip-point force and the motion of legs, we propose the hybrid motion/force control based on an adaptive neural network to compensate for the perturbations in the environment and approximate feedforward force and impedance of the leg joints. The proposed control can confront the uncertainties including approximation error and external perturbation. The verification of the proposed control is conducted using a simulation.

The causal meaning of Fisher’s average effect

PubMed Central

LEE, JAMES J.; CHOW, CARSON C.

2013-01-01

Summary In order to formulate the Fundamental Theorem of Natural Selection, Fisher defined the average excess and average effect of a gene substitution. Finding these notions to be somewhat opaque, some authors have recommended reformulating Fisher’s ideas in terms of covariance and regression, which are classical concepts of statistics. We argue that Fisher intended his two averages to express a distinction between correlation and causation. On this view, the average effect is a specific weighted average of the actual phenotypic changes that result from physically changing the allelic states of homologous genes. We show that the statistical and causal conceptions of the average effect, perceived as inconsistent by Falconer, can be reconciled if certain relationships between the genotype frequencies and non-additive residuals are conserved. There are certain theory-internal considerations favouring Fisher’s original formulation in terms of causality; for example, the frequency-weighted mean of the average effects equaling zero at each locus becomes a derivable consequence rather than an arbitrary constraint. More broadly, Fisher’s distinction between correlation and causation is of critical importance to gene-trait mapping studies and the foundations of evolutionary biology. PMID:23938113

A legal primer for the obesity prevention movement.

PubMed

Mermin, Seth E; Graff, Samantha K

2009-10-01

Public health advocates and scientists working on obesity prevention policy face challenges in balancing legal rights, individual freedom, and societal health goals. In particular, the US Constitution and the 50 state constitutions place limits on the ability of government to act, even in the best interests of the public. To help policymakers avoid crossing constitutional boundaries, we distilled the legal concepts most relevant to formulating policies aimed at preventing obesity: police power; allocation of power among federal, state, and local governments; freedom of speech; property rights; privacy; equal protection; and contract rights. The goal is to allow policymakers to avoid potential constitutional problems in the formation of obesity prevention policy.

A Three Stage Multi-attribute Procurement Auction: A Proposal for Department of Defense (DoD) Vendor Selection Decisions.

DTIC Science & Technology

2010-04-30

regarding production capabilities and costs, but must somehow form beliefs about the likelihood of a bid being accepted. We facilitate formulation...which both vendors believe the buyer places equal weight on the two attributes, but the vendors differ in their capabilities of producing those...exchange—the future of B2B . Harvard Business Review, 78(6), 86-96. = ^Åèìáëáíáçå=oÉëÉ~êÅÜ=mêçÖê~ã= do^ar^qb=p`elli=lc=_rpfkbpp=C=mr_if`=mlif`v= 444= k^s^i

Geometric derivations of minimal sets of sufficient multiview constraints

USGS Publications Warehouse

Thomas, Orrin H.; Oshel, Edward R.

2012-01-01

Geometric interpretations of four of the most common determinant formulations of multiview constraints are given, showing that they all enforce the same geometry and that all of the forms commonly in use in the machine vision community are a subset of a more general form. Generalising the work of Yi Ma yields a new general 2 x 2 determinant trilinear and 3 x 3 determinant quadlinear. Geometric descriptions of degenerate multiview constraints are given, showing that it is necessary, but insufficient, that the determinant equals zero. Understanding the degeneracies leads naturally into proofs for minimum sufficient sets of bilinear, trilinear and quadlinear constraints for arbitrary numbers of conjugate observations.

Cosmic-ray streaming perpendicular to the mean magnetic field. II - The gyrophase distribution function

NASA Technical Reports Server (NTRS)

Forman, M. A.; Jokipii, J. R.

1978-01-01

The distribution function of cosmic rays streaming perpendicular to the mean magnetic field in a turbulent medium is reexamined. Urch's (1977) discovery that in quasi-linear theory, the flux is due to particles at 90 deg pitch angle is discussed and shown to be consistent with previous formulations of the theory. It is pointed out that this flux of particles at 90 deg cannot be arbitrarily set equal to zero, and hence the alternative theory which proceeds from this premise is dismissed. A further, basic inconsistency in Urch's transport equation is demonstrated, and the connection between quasi-linear theory and compound diffusion is discussed.

[Interprofessional symptom management at the end of life].

PubMed

Frankenhauser, S; Geist, M J P; Weigand, M A; Bardenheuer, H J; Keßler, J

2018-05-01

At the end of life patients often show distressful symptoms which significantly reduce their quality of life. The goal of all healthcare professionals should be to recognize the beginning of this end of life period in order to provide good symptom management. For this purpose, existing symptoms have to be recorded, suitable therapeutic goals have to be defined for the current situation and potential therapeutic strategies have to be individually formulated. Besides the identification of underlying causes with the possibility of causal treatment, a symptom-based therapy is often necessary. Therapeutic approaches of different professions should be equally considered and should additionally be used for the benefit of the patient.

Endosseous dental implant vis-à-vis conservative management: Is it a dilemma?

PubMed Central

Chandra, Ramesh; Bains, Rhythm; Loomba, Kapil; Pal, U. S.; Ram, Hari; Bains, Vivek K.

2010-01-01

To overview the current prospective of endosseous dental implant and conservative management. Although emphasis has been made in reinstating the oral functions, less consideration has been given to formulate the best treatment tactics in a particular situation. Properly restored, root canal treated natural teeth surrounded by healthy periodontium tissues yield a very high longevity, and periodontally compromised teeth that are treated and maintained regularly may have longer survival rate. Current trends in implantology have weakened the conservative paradigm, and practitioner's objectivity has been inclined more toward providing the tooth substitutes often flaunted as equal or even superior to conservation of natural tooth PMID:22442546

Development of a SARS Coronavirus Vaccine from Recombinant Spike Protein Plus Delta Inulin Adjuvant.

PubMed

McPherson, Clifton; Chubet, Richard; Holtz, Kathy; Honda-Okubo, Yoshikazu; Barnard, Dale; Cox, Manon; Petrovsky, Nikolai

2016-01-01

Given periodic outbreaks of fatal human infections caused by coronaviruses, development of an optimal coronavirus vaccine platform capable of rapid production is an ongoing priority. This chapter describes the use of an insect cell expression system for rapid production of a recombinant vaccine against severe acute respiratory syndrome coronavirus (SARS). Detailed methods are presented for expression, purification, and release testing of SARS recombinant spike protein antigen, followed by adjuvant formulation and animal testing. The methods herein described for rapid development of a highly protective SARS vaccine are equally suited to rapid development of vaccines against other fatal human coronavirus infections, e.g., the MERS coronavirus.

A Conservative Formulation for Plasticity

DTIC Science & Technology

1992-01-01

UNCLASSIFIED UL NSN 7540-01-280-5500 Standard C -- -9P ’Rev 2 P1’su1ba Or AN-YS SI I AI) V -\\ -’ IsiN 17 l1 I IM 1 \\I f fi S 1i t i I 1( , 13. 402 -493...2.24) and (2.25) has been suggested by Frangenstcin and Colella [34], viz., the equality of mixed partial derivatiXes for d ) - a + [g"-, v ] = 0. (2.26...gradient nor plastic flow (i.e.. T = 0. E,’, = 0. and K = 0). inequality (3.12) leads to the identifications __ P -- - (3.13) and T (3.14) d S along with

Generalized image contrast enhancement technique based on the Heinemann contrast discrimination model

NASA Astrophysics Data System (ADS)

Liu, Hong; Nodine, Calvin F.

1996-07-01

This paper presents a generalized image contrast enhancement technique, which equalizes the perceived brightness distribution based on the Heinemann contrast discrimination model. It is based on the mathematically proven existence of a unique solution to a nonlinear equation, and is formulated with easily tunable parameters. The model uses a two-step log-log representation of luminance contrast between targets and surround in a luminous background setting. The algorithm consists of two nonlinear gray scale mapping functions that have seven parameters, two of which are adjustable Heinemann constants. Another parameter is the background gray level. The remaining four parameters are nonlinear functions of the gray-level distribution of the given image, and can be uniquely determined once the previous three are set. Tests have been carried out to demonstrate the effectiveness of the algorithm for increasing the overall contrast of radiology images. The traditional histogram equalization can be reinterpreted as an image enhancement technique based on the knowledge of human contrast perception. In fact, it is a special case of the proposed algorithm.

Development and validation of simple spectrophotometric and chemometric methods for simultaneous determination of empagliflozin and metformin: Applied to recently approved pharmaceutical formulation

NASA Astrophysics Data System (ADS)

Ayoub, Bassam M.

2016-11-01

New univariate spectrophotometric method and multivariate chemometric approach were developed and compared for simultaneous determination of empagliflozin and metformin manipulating their zero order absorption spectra with application on their pharmaceutical preparation. Sample enrichment technique was used to increase concentration of empagliflozin after extraction from tablets to allow its simultaneous determination with metformin without prior separation. Validation parameters according to ICH guidelines were satisfactory over the concentration range of 2-12 μg mL- 1 for both drugs using simultaneous equation with LOD values equal to 0.20 μg mL- 1 and 0.19 μg mL- 1, LOQ values equal to 0.59 μg mL- 1 and 0.58 μg mL- 1 for empagliflozin and metformin, respectively. While the optimum results for the chemometric approach using partial least squares method (PLS-2) were obtained using concentration range of 2-10 μg mL- 1. The optimized validated methods are suitable for quality control laboratories enable fast and economic determination of the recently approved pharmaceutical combination Synjardy® tablets.

[In vitro susceptibilities of causative organisms isolated from patients with primary respiratory tract infections to BRL 25000 (clavulanic acid/amoxicillin)].

PubMed

Deguchi, K; Fukayama, S; Nishimura, Y; Yokota, N; Tanaka, S; Oda, S; Matsumoto, Y; Ikegami, R; Sato, K; Fukumoto, T

1985-10-01

The in vitro susceptibilities of various causative organisms recently isolated from patients with primary respiratory tract infections to BRL 25000 (a formulation of amoxicillin, 2 parts, and potassium clavulanate, 1 part), amoxicillin (AMPC), cefaclor (CCL), cephalexin (CEX), cefadroxil (CDX) and cefroxadine (CXD) were determined. beta-Lactamase producing strains were detected by nitrocefin chromogenic method and PCG acidometric method. The frequency of isolation of beta-lactamase production in strains of S. aureus, H. influenzae, B. catarrhalis and K. pneumoniae was 92%, 18%, 36% and 98%, respectively. Against S. aureus strains with MIC values to AMPC of less than or equal to 100 micrograms/ml and CEX of less than or equal to 25 micrograms/ml BRL 25000 showed MIC values in the range 0.39-6.25 micrograms/ml with inocula of 10(6) CFU/ml, while BRL 25000 required 12.5-100 micrograms/ml of concentrations for inhibition of the strains with MIC values to AMPC of greater than 100 micrograms/ml and CEX of greater than or equal to 25 micrograms/ml. Against S. pyogenes and S. pneumoniae BRL 25000 showed MIC values in the range less than 0.024-0.10 micrograms/ml with inocula of 10(6) CFU/ml, which is much more active than CCL, CEX, CDX and CXD and slight less active than AMPC. Against H. influenzae and B. catarrhalis BRL 25000 showed MIC values in the range 0.20-6.25 micrograms/ml with inocula of 10(6) CFU/ml, which showed most potent activity among the agents tested. The activity of BRL 25000 against K. pneumoniae was approximately equal to that of CCL and superior to that of AMPC, CEX, CDX and CXD.

Calibrated birth-death phylogenetic time-tree priors for bayesian inference.

PubMed

Heled, Joseph; Drummond, Alexei J

2015-05-01

Here we introduce a general class of multiple calibration birth-death tree priors for use in Bayesian phylogenetic inference. All tree priors in this class separate ancestral node heights into a set of "calibrated nodes" and "uncalibrated nodes" such that the marginal distribution of the calibrated nodes is user-specified whereas the density ratio of the birth-death prior is retained for trees with equal values for the calibrated nodes. We describe two formulations, one in which the calibration information informs the prior on ranked tree topologies, through the (conditional) prior, and the other which factorizes the prior on divergence times and ranked topologies, thus allowing uniform, or any arbitrary prior distribution on ranked topologies. Although the first of these formulations has some attractive properties, the algorithm we present for computing its prior density is computationally intensive. However, the second formulation is always faster and computationally efficient for up to six calibrations. We demonstrate the utility of the new class of multiple-calibration tree priors using both small simulations and a real-world analysis and compare the results to existing schemes. The two new calibrated tree priors described in this article offer greater flexibility and control of prior specification in calibrated time-tree inference and divergence time dating, and will remove the need for indirect approaches to the assessment of the combined effect of calibration densities and tree priors in Bayesian phylogenetic inference. © The Author(s) 2014. Published by Oxford University Press, on behalf of the Society of Systematic Biologists.

Conceptual design and multidisciplinary optimization of in-plane morphing wing structures

NASA Astrophysics Data System (ADS)

Inoyama, Daisaku; Sanders, Brian P.; Joo, James J.

2006-03-01

In this paper, the topology optimization methodology for the synthesis of distributed actuation system with specific applications to the morphing air vehicle is discussed. The main emphasis is placed on the topology optimization problem formulations and the development of computational modeling concepts. For demonstration purposes, the inplane morphing wing model is presented. The analysis model is developed to meet several important criteria: It must allow large rigid-body displacements, as well as variation in planform area, with minimum strain on structural members while retaining acceptable numerical stability for finite element analysis. Preliminary work has indicated that addressed modeling concept meets the criteria and may be suitable for the purpose. Topology optimization is performed on the ground structure based on this modeling concept with design variables that control the system configuration. In other words, states of each element in the model are design variables and they are to be determined through optimization process. In effect, the optimization process assigns morphing members as 'soft' elements, non-morphing load-bearing members as 'stiff' elements, and non-existent members as 'voids.' In addition, the optimization process determines the location and relative force intensities of distributed actuators, which is represented computationally as equal and opposite nodal forces with soft axial stiffness. Several different optimization problem formulations are investigated to understand their potential benefits in solution quality, as well as meaningfulness of formulation itself. Sample in-plane morphing problems are solved to demonstrate the potential capability of the methodology introduced in this paper.

Numerical study of time domain analogy applied to noise prediction from rotating blades

NASA Astrophysics Data System (ADS)

Fedala, D.; Kouidri, S.; Rey, R.

2009-04-01

Aeroacoustic formulations in time domain are frequently used to model the aerodynamic sound of airfoils, the time data being more accessible. The formulation 1A developed by Farassat, an integral solution of the Ffowcs Williams and Hawkings equation, holds great interest because of its ability to handle surfaces in arbitrary motion. The aim of this work is to study the numerical sensitivity of this model to specified parameters used in the calculation. The numerical algorithms, spatial and time discretizations, and approximations used for far-field acoustic simulation are presented. An approach of quantifying of the numerical errors resulting from implementation of formulation 1A is carried out based on Isom's and Tam's test cases. A helicopter blade airfoil, as defined by Farassat to investigate Isom's case, is used in this work. According to Isom, the acoustic response of a dipole source with a constant aerodynamic load, ρ0c02, is equal to the thickness noise contribution. Discrepancies are observed when the two contributions are computed numerically. In this work, variations of these errors, which depend on the temporal resolution, Mach number, source-observer distance, and interpolation algorithm type, are investigated. The results show that the spline interpolating algorithm gives the minimum error. The analysis is then extended to Tam's test case. Tam's test case has the advantage of providing an analytical solution for the first harmonic of the noise produced by a specific force distribution.

Benzodiazepine use in seizure emergencies: A systematic review.

PubMed

Haut, Sheryl R; Seinfeld, Syndi; Pellock, John

2016-10-01

The aim of this review was to systematically examine safety and efficacy outcomes, as well as patient/caregiver satisfaction, from clinical studies in pediatric and adult patients treated with benzodiazepines (BZDs) through various administration routes in response to seizure emergencies. A literature search was conducted to identify articles describing the use of various routes of administration (RoAs) of BZDs for the treatment of seizure emergencies through April 21, 2015, using Embase™ and PubMed®. Eligible studies included (a) randomized controlled trials or (b) controlled nonrandomized clinical trials, either retrospective or prospective. Outcome assessments reviewed were 1) time to administration, 2) time to seizure termination, 3) rate of treatment failure, 4) prevention of seizure recurrence, 5) patient and caregiver treatment satisfaction, 6) adverse events related to BDZ treatment or RoA, and 7) respiratory adverse events. Seventy-five studies evaluated safety and efficacy using individual or comparator BDZs of various RoAs for treating seizure emergencies in all-aged patients with epilepsy. Buccal, intranasal (IN), or intramuscular (IM) BZDs were often more rapidly administered compared with rectal and intravenous (IV) formulations. Time to seizure termination, seizure recurrence rates, and adverse events were generally similar among RoAs, whereas nonrectal RoAs resulted in greater patient and caregiver satisfaction compared with rectal RoA. Results of this systematic literature review suggest that nonrectal and non-IV BZD formulations provide equal or improved efficacy and safety outcomes compared with rectal and IV formulations for the treatment of seizure emergencies. Copyright © 2016. Published by Elsevier Inc.

Physical properties and comparative strength of a bioactive luting cement.

PubMed

Jefferies, Steven; Lööf, Jesper; Pameijer, Cornelis H; Boston, Daniel; Galbraith, Colin; Hermansson, Leif

2013-01-01

New dental cement formulations require testing to determine physical and mechanical laboratory properties. To test an experimental calcium aluminate/glass-ionomer cement, Ceramir C and B (CC and B), regarding compressive strength (CS), film thickness (FT), net setting time (ST) and Vickers hardness. An additional test to evaluate potential dimensional change/expansion properties of this cement was also conducted. CS was measured according to a slightly modified ISO 9917:2003 for the CC and B specimens. The samples were not clamped while being exposed to relative humidity of great than 90 percent at 37 degrees C for 10 minutes before being stored in phosphate-buffered saline at 37 degrees C. For the CS, four groups were tested: Group 1-CC and B; Group 2-RelyX Luting Cement; Group 3-Fuji Plus; and Group 4-RelyX Unicem. Samples from all groups were stored for 24 hours before testing. Only CCandB was tested for ST and FT according to ISO 9917:2003. The FT was tested 2 minutes after mixing. Vickers hardness was evaluated using the CSM Microhardness Indentation Tester using zinc phosphate cement as a comparison material. Expansion testing included evaluating potential cracks in feldspathic porcelain jacket crowns (PJCs). The mean and standard deviation after 24 hours were expressed in MPa: Group 1 equals 160 plus or equal to 27; Group 2 equals 96 plus or equal to 10; Group 3 equals 138 plus or equal to 15; Group 4 equals 157 plus or equal to 10. A single-factor ANOVA demonstrated statistically significant differences between the groups (P less than 0.001). Pair-wise statistical comparison demonstrated a statistically significant difference between Groups 1 and 2. No statistically significant differences were found between other groups. The FT was 16.8 plus or equal to 0.9 and the ST was 4.8 plus or equal to 0.1 min. Vickers hardness for Ceramir C and B was 68.3 plus or equal to 17.2 and was statistically significantly higher (P less than 0.05) than Fleck's Zinc Phosphate cement at Vickers hardness of 51.4 plus or equal to 10. There was no evidence of cracks due to radial expansion in PJCs by the Ceramir C and B cement. All luting cements tested demonstrated compressive strengths well in excess of the ISO requirement for water-based cements of no less than 50 MPa. Ceramir C and B showed significantly higher CS than RelyX Luting Cement after 24 hours, but was not significantly higher than either Fuji Plus or RelyX Unicem. The ST and FT values of CC and B conform to and are within the boundaries of the requirements of the standard. Surface hardness was statistically higher than and comparable to zinc phosphate cement. There was no evidence of potentially clinically significant and deleterious expansion behavior by this cement. All cements tested demonstrated acceptable strength properties. Within the limits of this study, Ceramir C and B is deemed to possess physical properties suitable for a dental luting cement.

Highly selective medium for isolation of Listeria monocytogenes from food.

PubMed Central

al-Zoreky, N; Sandine, W E

1990-01-01

A new selective medium (Al-Zoreky-Sandine listeria medium [ASLM]) was formulated to recover Listeria monocytogenes from food specimens; the medium completely inhibited common food microflora. Recognition of Listeria colonies is evident by black discoloration of the medium due to esculin hydrolysis without need for special illuminating equipment. The medium contains acriflavin, ceftazidime, and moxalactam as selective agents. Compared with Listeria Selective Agar, ASLM was equally effective in recovering L. monocytogenes. However, ASLM inhibited micrococci, enterococci, and gram-negative bacteria, especially a strain that mimicked L. monocytogenes on Listeria Selective Agar. The new medium was able to recover heat injured cells with only 15% less count than the nonselective medium. Images PMID:2126701

Relating quantum coherence and correlations with entropy-based measures.

PubMed

Wang, Xiao-Li; Yue, Qiu-Ling; Yu, Chao-Hua; Gao, Fei; Qin, Su-Juan

2017-09-21

Quantum coherence and quantum correlations are important quantum resources for quantum computation and quantum information. In this paper, using entropy-based measures, we investigate the relationships between quantum correlated coherence, which is the coherence between subsystems, and two main kinds of quantum correlations as defined by quantum discord as well as quantum entanglement. In particular, we show that quantum discord and quantum entanglement can be well characterized by quantum correlated coherence. Moreover, we prove that the entanglement measure formulated by quantum correlated coherence is lower and upper bounded by the relative entropy of entanglement and the entanglement of formation, respectively, and equal to the relative entropy of entanglement for all the maximally correlated states.

Progress on a generalized coordinates tensor product finite element 3DPNS algorithm for subsonic

NASA Technical Reports Server (NTRS)

Baker, A. J.; Orzechowski, J. A.

1983-01-01

A generalized coordinates form of the penalty finite element algorithm for the 3-dimensional parabolic Navier-Stokes equations for turbulent subsonic flows was derived. This algorithm formulation requires only three distinct hypermatrices and is applicable using any boundary fitted coordinate transformation procedure. The tensor matrix product approximation to the Jacobian of the Newton linear algebra matrix statement was also derived. Tne Newton algorithm was restructured to replace large sparse matrix solution procedures with grid sweeping using alpha-block tridiagonal matrices, where alpha equals the number of dependent variables. Numerical experiments were conducted and the resultant data gives guidance on potentially preferred tensor product constructions for the penalty finite element 3DPNS algorithm.

A Legal Primer for the Obesity Prevention Movement

PubMed Central

Mermin, Seth E.

2009-01-01

Public health advocates and scientists working on obesity prevention policy face challenges in balancing legal rights, individual freedom, and societal health goals. In particular, the US Constitution and the 50 state constitutions place limits on the ability of government to act, even in the best interests of the public. To help policymakers avoid crossing constitutional boundaries, we distilled the legal concepts most relevant to formulating policies aimed at preventing obesity: police power; allocation of power among federal, state, and local governments; freedom of speech; property rights; privacy; equal protection; and contract rights. The goal is to allow policymakers to avoid potential constitutional problems in the formation of obesity prevention policy. PMID:19696384

Transport theory for a leaf canopy of finite-dimensional scattering centers

NASA Technical Reports Server (NTRS)

Myneni, Ranga B.; Marshak, Alexander L.; Kniazikhin, Iurii V.

1991-01-01

A formalism for photon transport in leaf canopies with finite-dimensional scattering centers that cross shade mutually is developed. Starting from first principles, expressions for the interaction cross sections are derived. The problem of illumination by a monodirectional source is studied in detail using a successive collisions approach. A balance equation is formulated in R3 and the interaction between a leaf canopy and the adjacent atmosphere is discussed. Although the details are those relating to a leaf canopy, the formalism is equally applicable to other media where the constituents cross shade mutually such as planetary surfaces, rings and ridged-ice in polar regions, i.e., media that exhibit opposition brightening.

Beam-splitter switches based on zenithal bistable liquid-crystal gratings.

PubMed

Zografopoulos, Dimitrios C; Beccherelli, Romeo; Kriezis, Emmanouil E

2014-10-01

The tunable optical diffractive properties of zenithal bistable nematic liquid-crystal gratings are theoretically investigated. The liquid-crystal orientation is rigorously solved via a tensorial formulation of the Landau-de Gennes theory and the optical transmission properties of the gratings are investigated via full-wave finite-element frequency-domain simulations. It is demonstrated that by proper design the two stable states of the grating can provide nondiffracting and diffracting operation, the latter with equal power splitting among different diffraction orders. An electro-optic switching mechanism, based on dual-frequency nematic materials, and its temporal dynamics are further discussed. Such gratings provide a solution towards tunable beam-steering and beam-splitting components with extremely low power consumption.

[Brazilian nursing and the democratization of health: notes on the National Policy of Popular Education in Health].

PubMed

David, Helena Maria Scherlowski Leal; Bonetti, Osvaldo Peralta; da Silva, Maria Rocineide Ferreira

2012-01-01

This essay discusses the role of Brazilian nursing as a socially committed practice, in the political and pedagogic plan. The concepts of popular participation, representative and participatory democracy, and education in health are recovered, enlightened by the recent history of the constitution of social network of practices and reflections called Popular Education and Health. The construction process and the ethical-political principles of a National Policy of Popular Education in Health are presented, discussing the participation of nursing in the changes of educational practices, in spaces of political representation and formulation of public policies, with a perspective of achieving a fair and equal social order.

Blade loss transient dynamics analysis with flexible bladed disk

NASA Technical Reports Server (NTRS)

Gallardo, V. C.; Black, G.; Bach, L.; Cline, S.; Storace, A.

1983-01-01

The transient dynamic response of a flexible bladed disk on a flexible rotor in a two rotor system is formulated by modal synthesis and a Lagrangian approach. Only the nonequilibrated one diameter flexible mode is considered for the flexible bladed disk, while the two flexible rotors are represented by their normal modes. The flexible bladed disk motion is modeled as a combination of two one diameter standing waves, and is coupled inertially and gyroscopically to the flexible rotors. Application to a two rotor model shows that a flexible bladed disk on one rotor can be driven into resonance by an unbalance in the other rotor, and at a frequency equal to the difference in the rotor speeds.

Adjuvant effect of Chakshushya Rasayana with beta-blocker eye drops in the management of progressive glaucomatous optic neuropathy: An open-label randomized controlled trial.

PubMed

Dhiman, K S; Adhoor, Veeranagouda S; Agarwal, Riju; Mehta, Amit J

2016-01-01

Primary open angle glaucoma is an insidious and chronic vision-threatening eye ailment due to neuro-retino-optic nerve degeneration, which may be due to the raised intraocular pressure (IOP) or due to independent factors. Management of glaucoma is mainly concentrated on lowering IOP that requires lifetime topical medication, different ocular medicaments for lowering of IOP, and surgical interventions, but it has its own limitations to control the progression of glaucomatous optic neuropathy (GON), and this is the reason behind the use of alternative neuroprotective adjuvants. To evaluate the neuroprotective effect of Ayurvedic line of management of progressive GON. Ingredients of trial drug Vara Fort powder ( Chakshushya Rasayana ) were procured from the Institute Pharmacy, except Swarnamakshika Bhasma , which was purchased from Dhootapapeshwar Pharmaceuticals. The patients fulfilling inclusion criteria, attending outpatient and inpatient departments, irrespective of their sex, race, religion, occupation, etc., were selected and divided into two groups with open-labeled randomization. In Group A, in addition to betaxolol (0.1%) or timolol (0.5%) (non-iobrim), Chakshushya Rasayana 6 g/day orally with Triphala Ghrita and honey along with Koshtha-Shuddhi (body-microchannel clearing treatment) protocol was tried. Nasya (oleation through nasal route) with Jeevantyadi Taila and Tarpana (eye satiation) with Go-Ghrita were also performed. In Group B (control), brimonidine (iobrim) 0.2% eye drop was used for 3 months. Significant improvement was observed in subjective parameters in Group A such as blurred vision, frequent change of presbyopic glasses, and delayed dark adaptation. Chakshushya Rasayana , if administered in a systematic approach along with a modern topical betaxolol or timolol eye drops, has a definite role in improving the lost retinal sensitivity as much as up to 12 dB in 3 months duration.

3D Higher Order Modeling in the BEM/FEM Hybrid Formulation

NASA Technical Reports Server (NTRS)

Fink, P. W.; Wilton, D. R.

2000-01-01

Higher order divergence- and curl-conforming bases have been shown to provide significant benefits, in both convergence rate and accuracy, in the 2D hybrid finite element/boundary element formulation (P. Fink and D. Wilton, National Radio Science Meeting, Boulder, CO, Jan. 2000). A critical issue in achieving the potential for accuracy of the approach is the accurate evaluation of all matrix elements. These involve products of high order polynomials and, in some instances, singular Green's functions. In the 2D formulation, the use of a generalized Gaussian quadrature method was found to greatly facilitate the computation and to improve the accuracy of the boundary integral equation self-terms. In this paper, a 3D, hybrid electric field formulation employing higher order bases and higher order elements is presented. The improvements in convergence rate and accuracy, compared to those resulting from lower order modeling, are established. Techniques developed to facilitate the computation of the boundary integral self-terms are also shown to improve the accuracy of these terms. Finally, simple preconditioning techniques are used in conjunction with iterative solution procedures to solve the resulting linear system efficiently. In order to handle the boundary integral singularities in the 3D formulation, the parent element- either a triangle or rectangle-is subdivided into a set of sub-triangles with a common vertex at the singularity. The contribution to the integral from each of the sub-triangles is computed using the Duffy transformation to remove the singularity. This method is shown to greatly facilitate t'pe self-term computation when the bases are of higher order. In addition, the sub-triangles can be further divided to achieve near arbitrary accuracy in the self-term computation. An efficient method for subdividing the parent element is presented. The accuracy obtained using higher order bases is compared to that obtained using lower order bases when the number of unknowns is approximately equal. Also, convergence rates obtained using higher order bases are compared to those obtained with lower order bases for selected sample

Product formulation for ohmic heating: blanching as a pretreatment method to improve uniformity in heating of solid-liquid food mixtures.

PubMed

Sarang, S; Sastry, S K; Gaines, J; Yang, T C S; Dunne, P

2007-06-01

The electrical conductivity of food components is critical to ohmic heating. Food components of different electrical conductivities heat at different rates. While equal electrical conductivities of all phases are desirable, real food products may behave differently. In the present study involving chicken chow mein consisting of a sauce and different solid components, celery, water chestnuts, mushrooms, bean sprouts, and chicken, it was observed that the sauce was more conductive than all solid components over the measured temperature range. To improve heating uniformity, a blanching method was developed to increase the ionic content of the solid components. By blanching different solid components in a highly conductive sauce at 100 degrees C for different lengths of time, it was possible to adjust their conductivity to that of the sauce. Chicken chow mein samples containing blanched particulates were compared with untreated samples with respect to ohmic heating uniformity at 60 Hz up to 140 degrees C. All components of the treated product containing blanched solids heated more uniformly than untreated product. In sensory tests, 3 different formulations of the blanched product showed good quality attributes and overall acceptability, demonstrating the practical feasibility of the blanching protocol.

Development of Novel Warfarin-Silica Composite for Controlled Drug Release.

PubMed

Parfenyuk, Elena V; Dolinina, Ekaterina S

2017-04-01

The work is devoted to synthesis and study of warfarin composites with unmodified, methyl and phenyl modified silica in order to develop controlled release formulation of the anticoagulant. The composites were prepared by two routes, adsorption and sol-gel, and characterized with FTIR spectroscopy, dynamic light scattering and DSC methods. The drug release behavior from the composites in media with pH 1.6, 6.8 and 7.4 was analyzed in vitro. The release kinetics of the warfarin - silica composites prepared by the two routes was compared among each other and with analogous silica composites with water soluble drug molsidomine. The comparative analysis showed that in general the kinetic regularities and mechanisms of release for both drugs are similar and determined by nonuniform distribution of the drugs over the silica matrixes and stability of the matrixes in the studied media for the adsorbed composites and uniformly distributed drug and more brittle structure for the sol-gel composites. The sol-gel composite of warfarin - phenyl modified silica is perspective for further development of novel warfarin formulation with controlled release because it releases warfarin according to zero-order kinetic law with approximately equal rate in the media imitating different segments of gastrointestinal tract.

Stückelberg formulation of holography

NASA Astrophysics Data System (ADS)

Dvali, Gia; Gomez, Cesar; Wintergerst, Nico

2016-10-01

We suggest that holography can be formulated in terms of the information capacity of the Stückelberg degrees of freedom that maintain gauge invariance of the theory in the presence of an information boundary. These Stückelbergs act as qubits that account for a certain fraction of quantum information. Their information capacity is measured by the ratio of the inverse Stückelberg energy gap to the size of the system. Systems with the smallest gap are maximally holographic. For massless gauge systems this information measure is universally equal to the inverse coupling evaluated at the systems' length scale. In this language it becomes very transparent why the Stückelberg information capacity of black holes saturates the Bekenstein bound and accounts for the entire information of the system. The physical reason is that the strength of quantum interaction is bounded from below by the gravitational coupling, which scales as area. Observing the striking similarity between the scalings of the energy gap of the boundary Stückelberg modes and the Bogoliubov modes of critical many-body systems, we establish a connection between holography and quantum criticality through the correspondence between these modes.

Intravenous paracetamol as an antipyretic and analgesic medication: the significance of drug metabolism.

PubMed

Giamarellos-Bourboulis, Evangelos J; Spyridaki, Aikaterini; Savva, Athina; Georgitsi, Marianna; Tsaganos, Thomas; Mouktaroudi, Maria; Raftogiannis, Maria; Antonopoulou, Anastasia; Papaziogas, Vassilios; Baziaka, Fotini; Sereti, Kalliopi; Christopoulos, Petros; Marioli, Androniki; Kanni, Theodora; Maravitsa, Panagiota; Pantelidou, Ilianna; Leventogiannis, Konstantinos; Tsiaoussis, Panagiotis; Lymberopoulou, Korina; Koutelidakis, Ioannis M

2014-01-01

One prospective, open-label, non-randomized study was conducted in 100 patients to define the antipyretic and analgesic effect of a new intravenous formulation of 1 g of paracetamol; 71 received paracetamol for the management of fever and 29 received paracetamol for pain relief after abdominal surgery or for neoplastic pain. Serial follow-up measurements of core temperature and of pain intensity were done for 6 h. Additional rescue medications were recorded for 5 days. Blood was sampled for the measurement of free paracetamol (APAP) and of glucuronide-APAP and N-sulfate-APAP by an HPLC assay. Defervescence, defined as core temperature below or equal to 37.1°C, was achieved in 52 patients (73.2%) within a median time of 3 h. Patients failing to become afebrile with the first dose of paracetamol became afebrile when administered other agents as rescue medications. Analgesia was achieved in 25 patients (86.4%) within a median time of 2 h. Serum levels of glucuronide-APAP were greater among non-responders to paracetamol. The presented results suggest that the intravenous formulation of paracetamol is clinically effective depending on drug metabolism.

Drug Delivery of the Future: Chasing the Invisible Gorilla

PubMed Central

Park, Kinam

2015-01-01

For more than 60 years drug delivery systems have produced numerous controlled release formulations helping patients improve compliance and maximize the drug efficacy. Development of new controlled drug delivery systems was very productive during the period 1950-1980. The productivity, as measured by the number of clinically used formulations, dropped significantly during 1980-2010. This reduced productivity needs to be understood so that the future development of drug delivery systems can be accelerated and prolific again. This requires critical evaluation of the current drug delivery field, so that the factors inhibiting rapid progress can be identified and resolved. The current drug delivery field is faced with an invisible gorilla syndrome, i.e., seeing a gorilla when it is not present and missing a gorilla when it actually exists. Overcoming this syndrome requires a new way of thinking, questioning the status quo. Advances in drug delivery technologies occur by an evolutionary process, and thus, the more trials and errors lead to faster advances. The drug delivery area needs to nurture the environment where vastly different ideas can be tested, and all data, positive or negative, need to be exchanged freely as they have equal importance. PMID:26519857

Low-VOC wood floor varnishes from waterborne oil-modified urethanes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ingle, D.M.; Petschke, G.H.

Varnishes protect wood flooring and enhance its beauty. Varnish compositions have varied from drying oils and alkyds to more durable systems (moisture-cured urethanes, oil-modified urethanes, epoxies and UV-curable coatings). Some chemistries are better suited for professional or factory applied situations. Oils, alkyds and oil-modified urethanes (OMU) are suitable for onsite professional application or even refinish application by homeowners (DIY market). These materials traditionally have been high in VOC. Recently, waterborne (WB) systems (such as polyurethane dispersions) with greatly reduced VOC have been used; high costs and relatively poor durability are drawbacks. A new generation of high performance waterborne oil-modified urethanemore » is now available with extended shelf-stability required for contractor and consumer markets. Formulated varnishes are coming onto the market that offer performance similar to conventional OMU, but with significant reductions in VOC. For example, a typical formulation for a conventional solvent-borne oil-modified urethane can be supplied at 1.6 lb/gal (less water). This represents a VOC reduction of 70-75% at equal application coating weight. Furthermore, waterborne oil-modified urethane offers advantages over polyurethane dispersions in performance areas such as durability and mar resistance.« less

Royal Decree No. 727/1988 on the restructuring of ministerial departments, 11 July 1988.

PubMed

1988-01-01

This Decree restructures the Central Administration of Spain to include the Ministry of Social Affairs. Among the functions of the Ministry are the following: 1) the preparation and execution of the Government's policy for the promotion and encouragement of conditions that make possible the social equality of both sexes, and the participation of women in political, cultural, economic, and social life; and 2) the legal protection of minors and, in a general fashion, the analysis, formulation, and coordination of programs of action relating to the prevention of juvenile delinquency; the promotion of institutions for adoption and foster care; and the evaluation and inspection of organizations of family integration. Royal Decree No. 791/1988 of the Ministry of Social Affairs of 20 July 1988 sets forth the organic structure of the Ministry of Social Affairs. Among the departments of the Ministry is the General Directorate for the Protection of Minors, whose general objective is the analysis, formulation, coordination, and supervision of programs of action relating to the legal and social protection of minors and the prevention of the marginalization of infants and youth. Attached to the Ministry as an autonomous organization is the Women's Institute. full text

Exoatmospheric intercepts using zero effort miss steering for midcourse guidance

NASA Astrophysics Data System (ADS)

Newman, Brett

The suitability of proportional navigation, or an equivalent zero effort miss formulation, for exatmospheric intercepts during midcourse guidance, followed by a ballistic coast to the endgame, is addressed. The problem is formulated in terms of relative motion in a general, three dimensional framework. The proposed guidance law for the commanded thrust vector orientation consists of the sum of two terms: (1) along the line of sight unit direction and (2) along the zero effort miss component perpendicular to the line of sight and proportional to the miss itself and a guidance gain. If the guidance law is to be suitable for longer range targeting applications with significant ballistic coasting after burnout, determination of the zero effort miss must account for the different gravitational accelerations experienced by each vehicle. The proposed miss determination techniques employ approximations for the true differential gravity effect and thus, are less accurate than a direct numerical propagation of the governing equations, but more accurate than a baseline determination, which assumes equal accelerations for both vehicles. Approximations considered are constant, linear, quadratic, and linearized inverse square models. Theoretical results are applied to a numerical engagement scenario and the resulting performance is evaluated in terms of the miss distances determined from nonlinear simulation.

Resistance formulas in hydraulics-based models for routing debris flows

USGS Publications Warehouse

Chen, Cheng-lung; Ling, Chi-Hai

1997-01-01

The one-dimensional, cross-section-averaged flow equations formulated for routing debris flows down a narrow valley are identical to those for clear-water flow, except for the differences in the values of the flow parameters, such as the momentum (or energy) correction factor, resistance coefficient, and friction slope. Though these flow parameters for debris flow in channels with cross-sections of arbitrary geometric shape can only be determined empirically, the theoretical values of such parameters for debris flow in wide channels exist. This paper aims to derive the theoretical resistance coefficient and friction slope for debris flow in wide channels using a rheological model for highly-concentrated, rapidly-sheared granular flows, such as the generalized viscoplastic fluid (GVF) model. Formulating such resistance coefficient or friction slope is equivalent to developing a generally applicable resistance formula for routing debris flows. Inclusion of a nonuniform term in the expression of the resistance formula proves useful in removing the customary assumption that the spatially varied resistance at any section is equal to what would take place with the same rate of flow passing the same section under conditions of uniformity. This in effect implies an improvement in the accuracy of unsteady debris-flow computation.

Traction-free vibrations of finite trigonal elastic cylinders.

PubMed

Heyliger, Paul R; Johnson, Ward L

2003-04-01

The unrestrained, traction-free vibrations of finite elastic cylinders with trigonal material symmetry are studied using two approaches, based on the Ritz method, which formulate the weak form of the equations of motion in cylindrical and rectangular coordinates. Elements of group theory are used to divide approximation functions into orthogonal subsets, thus reducing the size of the computational problem and classifying the general symmetries of the vibrational modes. Results for the special case of an isotropic cylinder are presented and compared with values published by other researchers. For the isotropic case, the relative accuracy of the formulations in cylindrical and rectangular coordinates can be evaluated, because exact analytical solutions are known for the torsional modes. The calculation in cylindrical coordinates is found to be more accurate for a given number of terms in the series approximation functions. For a representative trigonal material, langatate, calculations of the resonant frequencies and the sensitivity of the frequencies on each of the elastic constants are presented. The dependence on geometry (ratio of length to diameter) is briefly explored. The special case of a transversely isotropic cylinder (with the elastic stiffness C14 equal to zero) is also considered.

Experiments on Bedrock Cover in a Highly Sinuous Channel

NASA Astrophysics Data System (ADS)

Parker, G.; Fernandez, R.; Stark, C. P.

2015-12-01

One of several mechanisms by which bedrock rivers can incise is abrasion of the bedrock surface by colliding sediment particles. This effect has been captured in terms of a "cover factor" corresponding to the areal fraction p of the bed that is covered with sediment. According to this formulation, a value of p equal to 1 corresponds to complete alluvial cover: sediment particles strike each other and no bedrock abrasion is accomplished. Correspondingly, a value of p equal to 0 corresponds to the absence of sediment: no particles are available to strike the bed, and again no bedrock abrasion is accomplished. Thus the condition 0 < p < 1 is hypothesized to be the condition for incision driven by abrasion. At the microscopic level, however, p can take only the binary values 0 and 1: either a point on the bedrock surface is covered or is not covered. Therefore, the value of p that enters into any morphodynamic formulation of cover must represent an average over some spatiotemporal window. Here we consider the case of a highly sinuous meandering flume. The bed is set in concrete to take the topography corresponding to purely alluvial mobile-bed equilibrium. The recirculation of sediment over this bed at below-capacity conditions leads to a complex pattern of free and forced bars that only partially cover the bed. At certain locations, such as near the inside of bends, the bed is always covered, where at other locations, such as right near the apexes of the very tight bends in the flume, the bed is almost never covered. At other locations, the instantaneous cover fluctuates between the binary values 0 and 1, reflecting the migration of bars of various sizes over the bedrock surface. The averaging of these binary values over appropriate time windows allows determination of the local spatial variation of p that can serve as input to a numerical model of the evolution of bedrock meandering channels.

Design and rationale for the WARFA trial: a randomized controlled cross-over trial testing the therapeutic equivalence of branded and generic warfarin in atrial fibrillation patients in Brazil.

PubMed

Freitas, Carolina Gomes; Walsh, Michael; Atallah, Álvaro Nagib

2017-06-07

Warfarin is a commonly used anticoagulant. Whether a given dose of the different formulations of Brazilian warfarin will result in the same effect on the international normalized ratio (INR) is uncertain. The aim of the WARFA trial is to determine whether the branded and two generic warfarins available in Brazil differ in their effect on the INR. WARFA is a cross-over RCT comparing three warfarins. The formulations tested are the branded Marevan® (Uniao Quimica/Farmoquimica) and two generic warfarin (manufactured respectively by Uniao Quimica Farmaceutica Nacional and Laboratorio Teuto Brasileiro). All of them were manufactured in Brazil, are available in all settings of the Brazilian healthcare system and were purchased from retail drugstores. Eligible participants had atrial fibrillation or flutter, had been using warfarin for at least 2 months with a therapeutic range of 2.0-3.0 and had low variability in INR results during the 1st period of the trial. Our primary outcome, for which we have an equality hypothesis, is the difference between warfarins in the mean absolute difference between two INR results, obtained after three and 4 weeks with each drug. Our secondary outcomes, that will be tested for inequality (except for the mean INR, which will be tested for equality), include the difference in the warfarin dose, and time in therapeutic range. Clinical events and adherence were also recorded and will be reported. To our knowledge, WARFA will be the first comparison of the more readily applicable INR results between branded and generic warfarins in Brazil. WARFA is important because warfarins are commonly switched between in the course of a chronic treatment in Brazil. Final results of WARFA are expected in May 2017. ClinicalTrials.gov NCT02017197 . Registered 11 December 2013.

Mechanical and structural model of fractal networks of fat crystals at low deformations.

PubMed

Narine, S S; Marangoni, A G

1999-12-01

Fat-crystal networks demonstrate viscoelastic behavior at very small deformations. A structural model of these networks is described and supported by polarized light and atomic-force microscopy. A mechanical model is described which allows the shear elastic modulus (G') of the system to be correlated with forces acting within the network. The fractal arrangement of the network at certain length scales is taken into consideration. It is assumed that the forces acting are due to van der Waals forces. The final expression for G' is related to the volume fraction of solid fat (Phi) via the mass fractal dimension (D) of the network, which agrees with the experimental verification of the scaling behavior of fat-crystal networks [S. S. Narine and A. G. Marangoni, Phys. Rev. E 59, 1908 (1999)]. G' was also found to be inversely proportional to the diameter of the primary particles (sigma approximately equal to 6 microm) within the network (microstructural elements) as well as to the diameter of the microstructures (xi approximately equal to 100 microm) and inversely proportional to the cube of the intermicrostructural element distance (d(0)). This formulation of the elastic modulus agrees well with experimental observations.

Some Properties of Generalized Connections in Quantum Gravity

NASA Astrophysics Data System (ADS)

Velhinho, J. M.

2002-12-01

Theories of connections play an important role in fundamental interactions, including Yang-Mills theories and gravity in the Ashtekar formulation. Typically in such cases, the classical configuration space {A}/ {G} of connections modulo gauge transformations is an infinite dimensional non-linear space of great complexity. Having in mind a rigorous quantization procedure, methods of functional calculus in an extension of {A}/ {G} have been developed. For a compact gauge group G, the compact space /line { {A}{ {/}} {G}} ( ⊃ {A}/ {G}) introduced by Ashtekar and Isham using C*-algebraic methods is a natural candidate to replace {A}/ {G} in the quantum context, 1 allowing the construction of diffeomorphism invariant measures. 2,3,4 Equally important is the space of generalized connections bar {A} introduced in a similar way by Baez. 5 bar {A} is particularly useful for the definition of vector fields in /line { {A}{ {/}} {G}} , fundamental in the construction of quantum observables. 6 These works crucially depend on the use of (generalized) Wilson variables associated to certain types of curves. We will consider the case of piecewise analytic curves, 1,2,5 althought most of the arguments apply equally to the piecewise smooth case. 7,8...

Structural design of ketal and acetal blocking groups in two-component chemically amplified positive DUV resists

NASA Astrophysics Data System (ADS)

Mertesdorf, Carlo; Muenzel, Norbert; Holzwarth, Heinz E.; Falcigno, Pasquale A.; Schacht, Hans-Thomas; Rohde, Ottmar; Schulz, Reinhard; Slater, Sydney G.; Frey, David; Nalamasu, Omkaram; Timko, Allen G.; Neenan, Thomas X.

1995-06-01

In the present study, protecting groups of moderate stability, such as acetals and ketals, were investigated as pendant blocking groups in polyvinyl phenols. Polymers were obtained by reacting enol ethers with the phenolic side groups to form acetal or ketal blocked phenols. Decomposition temperatures, glass transition temperatures, and molecular weights of the resulting polymers were monitored and correlated with the protecting group structure. Stability of the protecting groups can be explained by protonation occurring at either of the two oxygen sites, making two cleavage routes possible. Secondary reactions of the released protecting groups in the resist film were investigated and discussed. The structure of the protecting group was designed in order to meet basic resist properties such as resolution/linearity, DOF, post exposure delay latitude and thermal stability. A Canon FPA 4500 (NA equals 0.37) and a GCA XLS exposure tool (NA equals 0.53) were used for the optimization process. A preoptimized resist formulation based on the above criteria exhibits 0.23 micrometers line/space resolution, 0.8 micrometers focus latitude at 0.25 micrometers resolution and approximately two hours post exposure delay latitude.

An amateur's contribution to the design of Telford's Menai Suspension Bridge: a commentary on Gilbert (1826) ‘On the mathematical theory of suspension bridges’

PubMed Central

Calladine, C. R.

2015-01-01

Davies Gilbert's work on the catenary is notable on two counts. First, it influenced Thomas Telford in formulating his final design for the Menai Strait suspension bridge (1826); and second, it established for the first time the form of the ‘catenary of equal strength’. The classical catenary is a uniform flexible chain or cable hanging freely under gravity between supports. The ‘catenary of equal strength’ is the form of a cable whose cross-sectional area is made proportional to the tension at each point, so that the tensile stress is uniform throughout. In this paper I provide a sketch of the lives and achievements of Gilbert and Telford, and of their interaction over the Menai Bridge. There follows a commentary on Gilbert's 1826 paper, and on his two related publications; and a brief sketch of the earlier history of the catenary. I then describe the development of the suspension bridge up to the present time. Finally, I discuss relations between mathematical analysts and practical engineers. This commentary was written to celebrate the 350th anniversary of the journal Philosophical Transactions of the Royal Society. PMID:25750153

Advantages of soft versus hard constraints in self-modeling curve resolution problems. Alternating least squares with penalty functions.

PubMed

Gemperline, Paul J; Cash, Eric

2003-08-15

A new algorithm for self-modeling curve resolution (SMCR) that yields improved results by incorporating soft constraints is described. The method uses least squares penalty functions to implement constraints in an alternating least squares algorithm, including nonnegativity, unimodality, equality, and closure constraints. By using least squares penalty functions, soft constraints are formulated rather than hard constraints. Significant benefits are (obtained using soft constraints, especially in the form of fewer distortions due to noise in resolved profiles. Soft equality constraints can also be used to introduce incomplete or partial reference information into SMCR solutions. Four different examples demonstrating application of the new method are presented, including resolution of overlapped HPLC-DAD peaks, flow injection analysis data, and batch reaction data measured by UV/visible and near-infrared spectroscopy (NIR). Each example was selected to show one aspect of the significant advantages of soft constraints over traditionally used hard constraints. Incomplete or partial reference information into self-modeling curve resolution models is described. The method offers a substantial improvement in the ability to resolve time-dependent concentration profiles from mixture spectra recorded as a function of time.

Accuracy of tablet splitting and liquid measurements: an examination of who, what and how.

PubMed

Abu-Geras, Dana; Hadziomerovic, Dunja; Leau, Andrew; Khan, Ramzan Nazim; Gudka, Sajni; Locher, Cornelia; Razaghikashani, Maryam; Lim, Lee Yong

2017-05-01

To examine factors that might affect the ability of patients to accurately halve tablets or measure a 5-ml liquid dose. Eighty-eight participants split four different placebo tablets by hand and using a tablet splitter, while 85 participants measured 5 ml of water, 0.5% methylcellulose (MC) and 1% MC using a syringe and dosing cup. Accuracy of manipulation was determined by mass measurements. The general population was less able than pharmacy students to break tablets into equal parts, although age, gender and prior experience were insignificant factors. Greater accuracy of tablet halving was observed with tablet splitter, with scored tablets split more equally than unscored tablets. Tablet size did not affect the accuracy of splitting. However, >25% of small scored tablets failed to be split by hand, and 41% of large unscored tablets were split into >2 portions in the tablet splitter. In liquid measurement, the syringe provided more accurate volume measurements than the dosing cup, with higher accuracy observed for the more viscous MC solutions than water. Formulation characteristics and manipulation technique have greater influences on the accuracy of medication modification and should be considered in off-label drug use in vulnerable populations. © 2016 Royal Pharmaceutical Society.

An amateur's contribution to the design of Telford's Menai Suspension Bridge: a commentary on Gilbert (1826) 'On the mathematical theory of suspension bridges'.

PubMed

Calladine, C R

2015-04-13

Davies Gilbert's work on the catenary is notable on two counts. First, it influenced Thomas Telford in formulating his final design for the Menai Strait suspension bridge (1826); and second, it established for the first time the form of the 'catenary of equal strength'. The classical catenary is a uniform flexible chain or cable hanging freely under gravity between supports. The 'catenary of equal strength' is the form of a cable whose cross-sectional area is made proportional to the tension at each point, so that the tensile stress is uniform throughout. In this paper I provide a sketch of the lives and achievements of Gilbert and Telford, and of their interaction over the Menai Bridge. There follows a commentary on Gilbert's 1826 paper, and on his two related publications; and a brief sketch of the earlier history of the catenary. I then describe the development of the suspension bridge up to the present time. Finally, I discuss relations between mathematical analysts and practical engineers. This commentary was written to celebrate the 350th anniversary of the journal Philosophical Transactions of the Royal Society.

The quest for universality: reflections on the Universal Draft Declaration on Bioethics and Human Rights.

PubMed

Rawlinson, Mary C; Donchin, Anne

2005-09-01

This essay focuses on two underlying presumptions that impinge on the effort of UNESCO to engender universal agreement on a set of bioethical norms: the conception of universality that pervades much of the document, and its disregard of structural inequalities that significantly impact health. Drawing on other UN system documents and recent feminist bioethics scholarship, we argue that the formulation of universal principles should not rely solely on shared ethical values, as the draft document affirms, but also on differences in ethical values that obtain across cultures. UNESCO's earlier work on gender mainstreaming illustrates the necessity of thinking from multiple perspectives in generating universal norms. The declaration asserts the 'fundamental equality of all human beings in dignity and rights'(1) and insists that 'the highest attainable standard of health is one of the fundamental rights of every human being without distinction of race, religion, political belief, economic or social condition'(2) yet it does not explicitly recognize disparities of power and wealth that deny equal dignity and rights to many. Without attention to structural (as opposed to merely accidental) inequities, UNESCO's invocation of rights is so abstract as to be incompatible with its avowed intention.

Beyond Yellow Curry: Assessing Commercial Curcumin Absorption Technologies

PubMed Central

Douglass, Brad J.; Clouatre, Dallas L.

2015-01-01

BACKGROUND: Few natural products have demonstrated the range of protective and therapeutic promise as have turmeric and its principal bioactive components: curcumin, demethoxycurcumin, and bisdemethoxycurcumin. Success in translating this potential into tangible benefits has been limited by inherently poor intestinal absorption, rapid metabolism, and limited systemic bioavailability. Seeking to overcome these limitations, food ingredient formulators have begun to employ a variety of approaches to enhance absorption and bioactivity. Many of these strategies improve upon the age-old practice of consuming turmeric in fat-based sauces, such as in a fat-rich yellow curry. However, there exists uncertainty as to how the various commercially available offerings compare to each other in terms of either uptake or efficacy, and this uncertainty leaves physicians and nutritionists with a dearth of data for making recommendations to interested patients and consumers. Further complicating the issue are recent data suggesting that formulation strategies may not equally enhance the absorption of individual curcuminoids, a significant issue in that these curcuminoids exhibit somewhat different physiologic properties. OBJECTIVE: This review introduces needed order to the curcumin marketplace by examining bioavailability studies on a number of commercial curcumin ingredients and evaluating them on a level playing field. METHODS: The comparative analysis includes standard pharmacokinetic parameters and a new metric, relative mass efficiency (E). Relative mass efficiency allows for the comparison of different formulations even in cases in which the weight percentage of curcuminoids is vastly different. RESULTS: A hydrophilic carrier dispersed curcuminoid formula exhibits 45.9 times the bioavailability of the standard purified 95 percent curcuminoid preparation and, based on relative mass efficiency, 1.5 times the bioavailability of the next best commercial ingredient, a cyclodextrin complex. CONCLUSIONS: Delivery strategies can significantly improve the bioavailability of curcuminoids. Total formula mass is important for making practical formulation decisions about dosing, cost and space. PMID:25856323

Enhanced repellency of binary mixtures of Zanthoxylum armatum seed oil, vanillin, and their aerosols to mosquitoes under laboratory and field conditions.

PubMed

Kwon, Hyung Wook; Kim, Soon-Il; Chang, Kyu-Sik; Clark, J Marshall; Ahn, Young-Joon

2011-01-01

The repellency of Zanthoxylum armatum seed oil (ZA-SO), alone or in combination with vanillin (VA), its six major constituents, and another four major previously known Zanthoxylum piperitum fruit oil constituents, as well as aerosol products containing 5 or 10% ZA-SO and 5% VA, was evaluated against female Aedes aegypti in laboratory and field studies. Results were then compared with those of N,N-diethyl-3-methylbenzamide (DEET) as a standard. Hand in cage laboratory tests showed that 0.2, 0.1, and 0.05 mg/cm2 ZA-SO resulted in > 92% protection through 30-min postexposure and was not significantly different than 0.05 mg/cm2 DEET. Skin treated with linalool and limonene (from Z. armatum) provided > 80% repellency to female Ae. aegypti at 10-min exposure, whereas cuminaldehyde, citronellal, geranyl acetate, and cuminyl alcohol (from Zanthoxylum piperitum) provided > 90% protection during this same time period. Only cuminaldehyde and citronellal provided complete protection comparable to DEET at 10-min postexposure. After that time, repellency of all plant constituents to mosquitoes was considerably decreased (< approximately 65%). An increase in repellency and duration of effectiveness was produced by a binary 1:4 mixture of ZA-SO and VA (0.05:0.2 mg/cm2) that was significantly more effective than 0.05 mg/cm2 DEET through 90 min. In field tests, an aerosol formulation containing 5 or 10% ZA-SO plus 5% VA gave 100% repellency at 60-min postexposure. Although these formulations were equal to the level of protection afforded by 10% DEET, repellency to the binary ZA-SO aerosol formulations at 90 min was significantly less effective than DEET. However, mixtures formulated from ZA-SO and VA merit further study as potential repellents for protection of humans and domestic animals from biting and nuisance caused by mosquitoes.

On why dynamic subgrid-scale models work

NASA Technical Reports Server (NTRS)

Jimenez, J.

1995-01-01

Dynamic subgrid models have proved to be remarkably successful in predicting the behavior of turbulent flows. Part of the reasons for their success are well understood. Since they are constructed to generate an effective viscosity which is proportional to some measure of the turbulent energy at the high wavenumber end of the spectrum, their eddy viscosity vanishes as the flow becomes laminar. This alone would justify their use over simpler models. But beyond this obvious advantage, which is confined to inhomogeneous and evolving flows, the reason why they also work better in simpler homogeneous cases, and how they do it without any obvious adjustable parameter, is not clear. This lack of understanding of the internal mechanisms of a useful tool is disturbing, not only as an intellectual challenge, but because it raises the doubt of whether it will work in all cases. This note is an attempt to clarify those mechanisms. We will see why dynamic models are robust and how they can get away with even comparatively gross errors in their formulations. This will suggest that they are only particular cases of a larger family of robust models, all of which would be relatively insensitive to large simplifications in the physics of the flow. We will also construct some such models, although mostly as research tools. It will turn out, however, that the standard dynamic formulation is not only robust to errors, but also behaves as if it were substantially well formulated. The details of why this is so will still not be clear at the end of this note, specially since it will be shown that the 'a priori' testing of the stresses gives, as is usual in most subgrid models, very poor results. But it will be argued that the basic reason is that the dynamic formulation mimics the condition that the total dissipation is approximately equal to the production measured at the test filter level.

Quantitative differences in the immunomodulatory effects of Rebif and Avonex in IFN-β 1a treated multiple sclerosis patients

PubMed Central

Christophi, George P.; Christophi, Jennifer A.; Gruber, Ross C.; Mihai, Cornelia; Mejico, Luis J.; Massa, Paul T.; Jubelt, Burk

2012-01-01

Interferon-β (IFN-β) is a current effective treatment for multiple sclerosis (MS) and exerts its therapeutic effects by down-modulating the systemic immune response and cytokine signaling. In clinical practice there are several formulations of interferon including a low dose of IFN-β 1a formulation of 30μg IM once weekly (Avonex) and a high dose formulation of 44 μg SC three times weekly (Rebif). Recent studies suggest that Rebif is more efficacious compared to Avonex in preventing relapses and decreasing MRI activity in relapsing remitting MS (RRMS) patients. This study examines whether there are quantitative gene expression changes in interferon-treated RRMS patients that can explain the difference in efficacy and side effects between Rebif and Avonex. Herein, RRMS patients were treated for three months with IFN-β 1a and the levels of plasma cytokines and gene expression in peripheral blood mononuclear cells were examined. Thirty-two normal subjects were compared to thirty-two RRMS patients, of which ten were treated with Rebif and ten with Avonex. Rebif and Avonex both significantly and equally suppressed plasma TNF-α and IL-6 levels. Rebif suppressed IL-13 significantly more than Avonex. Rebif also significantly suppressed the levels of the chemokines CCL17 and RANTES, the protease ADAM8, and COX-2 at a higher degree compared to Avonex. The STAT1-inducible genes IP-10 and caspase 1 were significantly increased with Rebif compared to Avonex. In conclusion, the higher dosed, more frequently administered IFN-β 1a Rebif when compared to IFN β-1a Avonex has more potent immunomodulatory effects. These quantitative results might relate to efficacy and side-effect profile of the two IFN-β 1a formulations and provide prospective practical clinical tools to monitor treatment and adjust dosage. PMID:21658727

A randomised, double-blind trial comparing budesonide formulations and dosages for short-term treatment of eosinophilic oesophagitis.

PubMed

Miehlke, Stephan; Hruz, Petr; Vieth, Michael; Bussmann, Christian; von Arnim, Ulrike; Bajbouj, Monther; Schlag, Christoph; Madisch, Ahmed; Fibbe, Christiane; Wittenburg, Henning; Allescher, Hans Dieter; Reinshagen, Max; Schubert, Stefan; Tack, Jan; Müller, Michaela; Krummenerl, Patrick; Arts, Joris; Mueller, Ralph; Dilger, Karin; Greinwald, Roland; Straumann, Alex

2016-03-01

To investigate the efficacy and safety of two different budesonide formulations (effervescent tablet for orodispersible use (BET) and viscous suspension (BVS)) with different daily dosages for short-term treatment of eosinophilic oesophagitis (EoE). Adults with active EoE (n=76) randomly received 14 days' treatment with either BET 2×1 mg/day (BET1, n=19) or BET 2×2 mg/day (BET2, n=19), or BVS 2×5 mL (0.4 mg/mL)/day (BVS, n=19) or placebo (n=19) in a double-blind, double-dummy fashion, with a 2-week follow-up. Primary end point was histological remission (mean of <16 eosinophils/mm(2 )hpf). Secondary end points included endoscopy score, dysphagia score, drug safety and patient's preference for drug formulation. Histological remission occurred in 100%, 94.7% and 94.7% of budesonide (BET1, BET2, BVS, respectively) and in 0% of placebo recipients (p<0.0001). The improvement in total endoscopic intensity score was significantly higher in the three budesonide groups compared with placebo. Dysphagia improved in all groups at the end of treatment; however, improvement of dysphagia persisted only in those treated with BET1 (p=0.0196 vs placebo). There were no serious adverse events. Local fungal infection (stained fungi) occurred in two patients of each budesonide group (10.5%). The effervescent tablet was preferred by 80% of patients. BET or BVS was highly effective and safe for short-term treatment of EoE. The 1 mg (twice daily) dosage was equally effective as the 2 mg twice daily dosage. The majority of patients preferred the effervescent tablet formulation. NCT02280616; EudraCT number, 2009-016692-29. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

A randomised, double-blind trial comparing budesonide formulations and dosages for short-term treatment of eosinophilic oesophagitis

PubMed Central

Miehlke, Stephan; Hruz, Petr; Vieth, Michael; Bussmann, Christian; von Arnim, Ulrike; Bajbouj, Monther; Schlag, Christoph; Madisch, Ahmed; Fibbe, Christiane; Wittenburg, Henning; Allescher, Hans Dieter; Reinshagen, Max; Schubert, Stefan; Tack, Jan; Müller, Michaela; Krummenerl, Patrick; Arts, Joris; Mueller, Ralph; Dilger, Karin; Greinwald, Roland; Straumann, Alex

2016-01-01

Objective To investigate the efficacy and safety of two different budesonide formulations (effervescent tablet for orodispersible use (BET) and viscous suspension (BVS)) with different daily dosages for short-term treatment of eosinophilic oesophagitis (EoE). Design Adults with active EoE (n=76) randomly received 14 days’ treatment with either BET 2×1 mg/day (BET1, n=19) or BET 2×2 mg/day (BET2, n=19), or BVS 2×5 mL (0.4 mg/mL)/day (BVS, n=19) or placebo (n=19) in a double-blind, double-dummy fashion, with a 2-week follow-up. Primary end point was histological remission (mean of <16 eosinophils/mm2 hpf). Secondary end points included endoscopy score, dysphagia score, drug safety and patient's preference for drug formulation. Results Histological remission occurred in 100%, 94.7% and 94.7% of budesonide (BET1, BET2, BVS, respectively) and in 0% of placebo recipients (p<0.0001). The improvement in total endoscopic intensity score was significantly higher in the three budesonide groups compared with placebo. Dysphagia improved in all groups at the end of treatment; however, improvement of dysphagia persisted only in those treated with BET1 (p=0.0196 vs placebo). There were no serious adverse events. Local fungal infection (stained fungi) occurred in two patients of each budesonide group (10.5%). The effervescent tablet was preferred by 80% of patients. Conclusions BET or BVS was highly effective and safe for short-term treatment of EoE. The 1 mg (twice daily) dosage was equally effective as the 2 mg twice daily dosage. The majority of patients preferred the effervescent tablet formulation. ClinicalTrials.gov number NCT02280616; EudraCT number, 2009-016692-29. PMID:25792708

Digestion and nitrogen balance using swine diets containing increasing proportions of coproduct ingredients and formulated using the net energy system.

PubMed

Acosta, J A; Boyd, R D; Patience, J F

2017-03-01

Rising feed expenditures demand that our industry pursues strategies to lower the cost of production. One option is the adoption of the NE system, although many producers are hesitant to proceed without proof that NE estimates are reliable. The objective of this experiment was to compare the apparent total tract digestibility (ATTD) of energy and nutrients and the N retention (NR) of diets formulated using the NE system with increasing quantities of coproduct ingredients. The 5 dietary treatments included a control corn-soybean meal diet (CTL); the CTL plus 6% each of corn distiller's dried grains with solubles (DDGS), corn germ meal, and wheat middlings and NE equal to the CTL by adding soybean oil (CONS-18); the CONS-18 diet, without oil added, with NE content lower than the CTL (DECL-18); the CTL plus 12% each of corn DDGS, corn germ meal, and wheat middlings and NE equal to the CTL by adding soybean oil (CONS-36); and the CONS-36 diet, without oil added, with NE content lower than the CTL (DECL-36). Diets were formulated for both the growing period (GP; 40 to 70 kg) and the finishing period (FP; 70 to 110 kg). Forty gilts (PIC 337 × C22 or C29; 38.5 ± 0.4 kg initial BW) were randomly assigned to treatment and received feed and water ad libitum (8 pigs per treatment). For the last 13 d of the GP and FP, pigs were transferred to metabolism crates, where 2 total urine and fecal collections (d 4 to 6 and d 11 to 13) were performed. The GP fed diets with coproduct ingredients had lower ATTD of DM, N, and GE than those fed the CTL ( < 0.050). The ATTD of N and GE progressively decreased as coproduct inclusion increased from 0 to 18 to 36% in the FP ( < 0.010). In the GP and FP, there were no differences in ATTD of DM, N, or GE between CONS-18 and DECL-18 or between CONS-36 and DECL-36 ( > 0.050). The NR declined on all coproduct diets in the GP ( = 0.010) and tended to decline in the FP ( = 0.079). There were no differences in NR between CONS-18 and DECL-18 or between CONS-36 and DECL-36 ( > 0.050). In conclusion, digestion of diets containing up to 36% coproducts and formulated using NE resulted in expected DE and ME values; NR of diets with coproducts was lower than that of the simple CTL, which is not related to the accuracy of the energy estimations but rather to other factors such as imbalances in the AA concentrations or to postabsorptive energy metabolism, factors not accounted for by the current energy systems approach.

Contrast media as carriers for local drug delivery. Successful inhibition of neointimal proliferation in the porcine coronary stent model.

PubMed

Scheller, Bruno; Speck, Ulrich; Romeike, Bernd; Schmitt, Alexander; Sovak, Milos; Böhm, Michael; Stoll, Hans Peter

2003-08-01

Lipophilic taxanes can be dissolved in contrast media at significantly higher concentration than in saline. As contrast media have occasionally been observed to delineate the contour of coronary arteries for some seconds they may serve as a matrix for an antiproliferative drug aimed at preventing restenosis. The aim of this study was to test a novel taxane-contrast agent formulation for this new approach in the setting of coronary stenting. In cell culture experiments (bovine vascular smooth muscle cells), 60-min incubation with contrast agent-taxane formulations (iopromide-paclitaxel, iopromide-protaxel) induced a significant, concentration-dependent inhibition of vascular smooth muscle cell (VSMC) proliferation over 12 days. Shorter incubation times of 10 and 3 min showed the same efficacy. For in vivo investigation, 16 stents were implanted into the coronary arteries of eight pigs using a 1.3 to 1 overstretch ratio. A control group received iopromide 370 alone while the treatment group was injected with a iopromide-protaxel formulation at a dose of 74 micromol/l, which is far below protaxel levels inducing systemic toxicity. Quantitative angiography and histomorphometry of the stented arteries asserted statistic equality of the baseline parameters between the control and treatment groups. After 28 days, the treatment group showed a marked reduction of the parameters characterizing in-stent restenosis, especially a 34% reduction of the neointimal area. First evidence is provided that using a contrast agent as solvent for a taxane constitutes a new drug delivery mechanism able to inhibit in-stent restenosis in the porcine restenosis model.

Modeling Flow in Porous Media with Double Porosity/Permeability.

NASA Astrophysics Data System (ADS)

Seyed Joodat, S. H.; Nakshatrala, K. B.; Ballarini, R.

2016-12-01

Although several continuum models are available to study the flow of fluids in porous media with two pore-networks [1], they lack a firm theoretical basis. In this poster presentation, we will present a mathematical model with firm thermodynamic basis and a robust computational framework for studying flow in porous media that exhibit double porosity/permeability. The mathematical model will be derived by appealing to the maximization of rate of dissipation hypothesis, which ensures that the model is in accord with the second law of thermodynamics. We will also present important properties that the solutions under the model satisfy, along with an analytical solution procedure based on the Green's function method. On the computational front, a stabilized mixed finite element formulation will be derived based on the variational multi-scale formalism. The equal-order interpolation, which is computationally the most convenient, is stable under this formulation. The performance of this formulation will be demonstrated using patch tests, numerical convergence study, and representative problems. It will be shown that the pressure and velocity profiles under the double porosity/permeability model are qualitatively and quantitatively different from the corresponding ones under the classical Darcy equations. Finally, it will be illustrated that the surface pore-structure is not sufficient in characterizing the flow through a complex porous medium, which pitches a case for using advanced characterization tools like micro-CT. References [1] G. I. Barenblatt, I. P. Zheltov, and I. N. Kochina, "Basic concepts in the theory of seepage of homogeneous liquids in fissured rocks [strata]," Journal of Applied Mathematics and Mechanics, vol. 24, pp. 1286-1303, 1960.

CCM Continuity Constraint Method: A finite-element computational fluid dynamics algorithm for incompressible Navier-Stokes fluid flows

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, P. T.

1993-09-01

As the field of computational fluid dynamics (CFD) continues to mature, algorithms are required to exploit the most recent advances in approximation theory, numerical mathematics, computing architectures, and hardware. Meeting this requirement is particularly challenging in incompressible fluid mechanics, where primitive-variable CFD formulations that are robust, while also accurate and efficient in three dimensions, remain an elusive goal. This dissertation asserts that one key to accomplishing this goal is recognition of the dual role assumed by the pressure, i.e., a mechanism for instantaneously enforcing conservation of mass and a force in the mechanical balance law for conservation of momentum. Provingmore » this assertion has motivated the development of a new, primitive-variable, incompressible, CFD algorithm called the Continuity Constraint Method (CCM). The theoretical basis for the CCM consists of a finite-element spatial semi-discretization of a Galerkin weak statement, equal-order interpolation for all state-variables, a 0-implicit time-integration scheme, and a quasi-Newton iterative procedure extended by a Taylor Weak Statement (TWS) formulation for dispersion error control. Original contributions to algorithmic theory include: (a) formulation of the unsteady evolution of the divergence error, (b) investigation of the role of non-smoothness in the discretized continuity-constraint function, (c) development of a uniformly H 1 Galerkin weak statement for the Reynolds-averaged Navier-Stokes pressure Poisson equation, (d) derivation of physically and numerically well-posed boundary conditions, and (e) investigation of sparse data structures and iterative methods for solving the matrix algebra statements generated by the algorithm.« less

Topics in Covariant Closed String Field Theory and Two-Dimensional Quantum Gravity

NASA Astrophysics Data System (ADS)

Saadi, Maha

1991-01-01

The closed string field theory based on the Witten vertex is found to be nonpolynomial in order to reproduce all tree amplitudes correctly. The interactions have a geometrical pattern of overlaps, which can be thought as the edges of a spherical polyhedron with face-perimeters equal to 2pi. At each vertex of the polyhedron there are three faces, thus all elementary interactions are cubic in the sense that at most three strings can coincide at a point. The quantum action is constructed by substracting counterterms which cancel the overcounting of moduli space, and by adding loop vertices in such a way no possible surfaces are missed. A counterterm that gives the correct one-string one-loop amplitude is formulated. The lowest order loop vertices are analyzed in the cases of genus one and two. Also, a one-loop two -string counterterm that restores BRST invariance to the respective scattering amplitude is constructed. An attempt to understand the formulation of two -dimensional pure gravity from the discrete representation of a two-dimensional surface is made. This is considered as a toy model of string theory. A well-defined mathematical model is used. Its continuum limit cannot be naively interpreted as pure gravity because each term of the sum over surfaces is not positive definite. The model, however, could be considered as an analytic continuation of the standard matrix model formulation of gravity. (Copies available exclusively from MIT Libraries, Rm. 14-0551, Cambridge, MA 02139-4307. Ph. 617-253-5668; Fax 617-253-1690.).

Role of slack variables in quasi-Newton methods for constrained optimization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tapia, R.A.

In constrained optimization the technique of converting an inequality constraint into an equality constraint by the addition of a squared slack variable is well known but rarely used. In choosing an active constraint philosophy over the slack variable approach, researchers quickly justify their choice with the standard criticisms: the slack variable approach increases the dimension of the problem, is numerically unstable, and gives rise to singular systems. It is shown that these criticisms of the slack variable approach need not apply and the two seemingly distinct approaches are actually very closely related. In fact, the squared slack variable formulation canmore » be used to develop a superior and more comprehensive active constraint philosophy.« less

Treatment of Actinic Purpura

PubMed Central

2017-01-01

Mature skin is prone to bruising, resulting in a condition known as actinic purpura, characterized by unsightly ecchymosis and purple patches. Similar to other skin conditions, the incidence of actinic purpura increases with advancing age and occurs with equal frequency among men and women. The unsightly appearance of actinic purpura may be a source of emotional distress among the elderly. A new product has been formulated specifically for the treatment of actinic purpura. This product contains retinol, α-hydroxy acids, arnica oil, ceramides, niacinamide, and phytonadione, which effectively treat actinic purpura by improving local circulation, thickening the skin, and repairing the skin barrier. The objective of this paper is to review the beneficial properties of these ingredients and their respective roles in the treatment of actinic purpura. PMID:28979656

Recursive computation of mutual potential between two polyhedra

NASA Astrophysics Data System (ADS)

Hirabayashi, Masatoshi; Scheeres, Daniel J.

2013-11-01

Recursive computation of mutual potential, force, and torque between two polyhedra is studied. Based on formulations by Werner and Scheeres (Celest Mech Dyn Astron 91:337-349, 2005) and Fahnestock and Scheeres (Celest Mech Dyn Astron 96:317-339, 2006) who applied the Legendre polynomial expansion to gravity interactions and expressed each order term by a shape-dependent part and a shape-independent part, this paper generalizes the computation of each order term, giving recursive relations of the shape-dependent part. To consider the potential, force, and torque, we introduce three tensors. This method is applicable to any multi-body systems. Finally, we implement this recursive computation to simulate the dynamics of a two rigid-body system that consists of two equal-sized parallelepipeds.

[Drug vectorization or how to modulate tissular and cellular distribution of biologically active compounds].

PubMed

Couvreur, P

2001-07-01

Drug vectorization has undergone considerable development over the last few years. This review focuses on the intravenous route of administration. Colloid formulations allow a modulation of drug tissue distribution. Using liposomes and nanoparticles with unmodified surfaces, drugs can be targeted to macrophages of the reticulum endothelium system. When the liposomes or nanoparticles are covered with hydrophilic or flexible polymers, the vascular phase can be favored in order, for example, to facilitate selective extravasation at a tumor site. Therapeutic applications of these systems are presented. The development of "intelligent" vectors capable of modulating intracellular distribution of an active compounds is an equally interesting approach, for example pH-sensitive liposomes or nanoparticles decorated with folic acid capable of targeting intracellular cytoplasm.

Effective High-Frequency Permeability of Compacted Metal Powders

NASA Astrophysics Data System (ADS)

Volkovskaya, I. I.; Semenov, V. E.; Rybakov, K. I.

2018-03-01

We propose a model for determination of the effective complex permeability of compacted metal-powder media. It is based on the equality of the magnetic moment in a given volume of the media with the desired effective permeability to the total magnetic moment of metal particles in the external high-frequency magnetic field, which arises due to excitation of electric eddy currents in the particles. Calculations within the framework of the proposed model allow us to refine the values of the real and imaginary components of the permeability of metal powder compacts in the microwave band. The conditions of applicability of the proposed model are formulated, and their fulfillment is verified for metal powder compacts in the microwave and millimeter wavelength bands.

Forward multiple scattering corrections as function of detector field of view

NASA Astrophysics Data System (ADS)

Zardecki, A.; Deepak, A.

1983-06-01

The theoretical formulations are given for an approximate method based on the solution of the radiative transfer equation in the small angle approximation. The method is approximate in the sense that an approximation is made in addition to the small angle approximation. Numerical results were obtained for multiple scattering effects as functions of the detector field of view, as well as the size of the detector's aperture for three different values of the optical depth tau (=1.0, 4.0 and 10.0). Three cases of aperture size were considered--namely, equal to or smaller or larger than the laser beam diameter. The contrast between the on-axis intensity and the received power for the last three cases is clearly evident.

Analysis for predicting adiabatic wall temperatures with single hole coolant injection into a low speed crossflow

NASA Astrophysics Data System (ADS)

Wang, C. R.; Papell, S. S.; Graham, R. W.

Assuming the local adiabatic wall temperature equals the local total temperature in a low speed coolant mixing layer, integral conservation equations with and without the boundary layer effects are formulated for the mixing layer downstream of a single coolant injection hole oriented at a 30 degree angle to the crossflow. These equations are solved numerically to determine the center line local adiabatic wall temperature and the effective coolant coverage area. Comparison of the numerical results with an existing film cooling experiment indicates that the present analysis permits a simplified but reasonably accurate prediction of the centerline effectiveness and coolant coverage area downstream of a single hole crossflow streamwise injection at 30 degree inclination angle.

Analysis for predicting adiabatic wall temperatures with single hole coolant injection into a low speed crossflow

NASA Technical Reports Server (NTRS)

Wang, C. R.; Papell, S. S.; Graham, R. W.

1981-01-01

Assuming the local adiabatic wall temperature equals the local total temperature in a low speed coolant mixing layer, integral conservation equations with and without the boundary layer effects are formulated for the mixing layer downstream of a single coolant injection hole oriented at a 30 degree angle to the crossflow. These equations are solved numerically to determine the center line local adiabatic wall temperature and the effective coolant coverage area. Comparison of the numerical results with an existing film cooling experiment indicates that the present analysis permits a simplified but reasonably accurate prediction of the centerline effectiveness and coolant coverage area downstream of a single hole crossflow streamwise injection at 30 degree inclination angle.

Analysis for predicting adiabatic wall temperatures with single hole coolant injection into a low speed crossflow

NASA Astrophysics Data System (ADS)

Wang, C. R.; Papell, S. S.; Graham, R. W.

1981-03-01

Assuming the local adiabatic wall temperature equals the local total temperature in a low speed coolant mixing layer, integral conservation equations with and without the boundary layer effects are formulated for the mixing layer downstream of a single coolant injection hole oriented at a 30 degree angle to the crossflow. These equations are solved numerically to determine the center-line local adiabatic wall temperature and the effective coolant coverage area. Comparison of the numerical results with an existing film cooling experiment indicates that the present analysis permits a simplified but reasonably accurate prediction of the centerline effectiveness and coolant coverage area downstream of a single hole crossflow streamwise injection at 30-deg inclination angle.

Analysis for predicting adiabatic wall temperatures with single hole coolant injection into a low speed crossflow

NASA Technical Reports Server (NTRS)

Wang, C. R.; Papell, S. S.; Graham, R. W.

1981-01-01

Assuming the local adiabatic wall temperature equals the local total temperature in a low speed coolant mixing layer, integral conservation equations with and without the boundary layer effects are formulated for the mixing layer downstream of a single coolant injection hole oriented at a 30 degree angle to the crossflow. These equations are solved numerically to determine the center-line local adiabatic wall temperature and the effective coolant coverage area. Comparison of the numerical results with an existing film cooling experiment indicates that the present analysis permits a simplified but reasonably accurate prediction of the centerline effectiveness and coolant coverage area downstream of a single hole crossflow streamwise injection at 30-deg inclination angle.

Rapid Damping of the Oscillations of Coronal Loops with an Azimuthal Magnetic Field

NASA Astrophysics Data System (ADS)

Mikhalyaev, B. B.

2005-06-01

We consider the MHD oscillations of an inhomogeneous coronal loop that consists of a dense cord surrounded by a shell. The magnetic field is longitudinal in the cord and has only an azimuthal component in the shell. The parameters of the loop are chosen to be such that there are no resonances; i.e., the resonance points are cut off. This choice is dictated by the formulated problem of considering the influence of the radiation of MHD waves into the surrounding space on the loop oscillations, thereby ruling out the possibility of resonant energy absorption. The wave radiation efficiency is high and allows low oscillation Q-factors, which are equal in order of magnitude to their observed values, to be obtained.

A step-up test procedure to find the minimum effective dose.

PubMed

Wang, Weizhen; Peng, Jianan

2015-01-01

It is of great interest to find the minimum effective dose (MED) in dose-response studies. A sequence of decreasing null hypotheses to find the MED is formulated under the assumption of nondecreasing dose response means. A step-up multiple test procedure that controls the familywise error rate (FWER) is constructed based on the maximum likelihood estimators for the monotone normal means. When the MED is equal to one, the proposed test is uniformly more powerful than Hsu and Berger's test (1999). Also, a simulation study shows a substantial power improvement for the proposed test over four competitors. Three R-codes are provided in Supplemental Materials for this article. Go to the publishers online edition of Journal of Biopharmaceutical Statistics to view the files.

Homogeneous-heterogeneous reactions in curved channel with porous medium

NASA Astrophysics Data System (ADS)

Hayat, T.; Ayub, Sadia; Alsaedi, A.

2018-06-01

Purpose of the present investigation is to examine the peristaltic flow through porous medium in a curved conduit. Problem is modeled for incompressible electrically conducting Ellis fluid. Influence of porous medium is tackled via modified Darcy's law. The considered model utilizes homogeneous-heterogeneous reactions with equal diffusivities for reactant and autocatalysis. Constitutive equations are formulated in the presence of viscous dissipation. Channel walls are compliant in nature. Governing equations are modeled and simplified under the assumptions of small Reynolds number and large wavelength. Graphical results for velocity, temperature, heat transfer coefficient and homogeneous-heterogeneous reaction parameters are examined for the emerging parameters entering into the problem. Results reveal an activation in both homogenous-heterogenous reaction effect and heat transfer rate with increasing curvature of the channel.

Minimalist approach to the classification of symmetry protected topological phases

NASA Astrophysics Data System (ADS)

Xiong, Zhaoxi

A number of proposals with differing predictions (e.g. group cohomology, cobordisms, group supercohomology, spin cobordisms, etc.) have been made for the classification of symmetry protected topological (SPT) phases. Here we treat various proposals on equal footing and present rigorous, general results that are independent of which proposal is correct. We do so by formulating a minimalist Generalized Cohomology Hypothesis, which is satisfied by existing proposals and captures essential aspects of SPT classification. From this Hypothesis alone, formulas relating classifications in different dimensions and/or protected by different symmetry groups are derived. Our formalism is expected to work for fermionic as well as bosonic phases, Floquet as well as stationary phases, and spatial as well as on-site symmetries.

Mental health and inequity: a human rights approach to inequality, discrimination, and mental disability.

PubMed

Burns, Jonathan Kenneth

2009-01-01

Mental disability and mental health care have been neglected in the discourse around health, human rights, and equality. This is perplexing as mental disabilities are pervasive, affecting approximately 8% of the world population. Furthermore, the experience of persons with mental disability is one characterized by multiple interlinked levels of inequality and discrimination within society. Efforts directed toward achieving formal equality should not stand alone without similar efforts to achieve substantive equality for persons with mental disabilities. Structural factors such as poverty, inequality, homelessness, and discrimination contribute to risk for mental disability and impact negatively on the course and outcome of such disabilities. A human rights approach to mental disability means affirming the full personhood of those with mental disabilities by respecting their inherent dignity, their individual autonomy and independence, and their freedom to make their own choices. A rights-based approach requires us to examine and transform the language, terminology, and models of mental disability that have previously prevailed especially within health discourse. Such an approach also requires us to examine the multiple ways in which inequality and discrimination characterize the lives of persons with mental disabilities and to formulate a response based on a human rights framework. In this article, I examine issues of terminology, models of understanding mental disability, and the implications of international treaties such as the United Nations Convention on the Rights of Persons with Disabilities for our response to the inequalities and discrimination that exist within society--both within and outside the health care system. Finally, while acknowledging that health care professionals have a role to play as advocates for equality, non-discrimination, and justice, I argue that it is persons with mental disabilities themselves who have the right to exercise agency in their own lives and who, consequently, should be at the center of advocacy movements and the setting of the advocacy agenda.

Choice and conditioned reinforcement.

PubMed Central

Fantino, E; Freed, D; Preston, R A; Williams, W A

1991-01-01

A potential weakness of one formulation of delay-reduction theory is its failure to include a term for rate of conditioned reinforcement, that is, the rate at which the terminal-link stimuli occur in concurrent-chains schedules. The present studies assessed whether or not rate of conditioned reinforcement has an independent effect upon choice. Pigeons responded on either modified concurrent-chains schedules or on comparable concurrent-tandem schedules. The initial link was shortened on only one of two concurrent-chains schedules and on only one of two corresponding concurrent-tandem schedules. This manipulation increased rate of conditioned reinforcement sharply in the chain but not in the tandem schedule. According to a formulation of delay-reduction theory, when the outcomes chosen (the terminal links) are equal, as in Experiment 1, choice should depend only on rate of primary reinforcement; thus, choice should be equivalent for the tandem and chain schedules despite a large difference in rate of conditioned reinforcement. When the outcomes chosen are unequal, however, as in Experiment 2, choice should depend upon both rate of primary reinforcement and relative signaled delay reduction; thus, larger preferences should occur in the chain than in the tandem schedules. These predictions were confirmed, suggesting that increasing the rate of conditioned reinforcement on concurrent-chains schedules may have no independent effect on choice. PMID:2037826

Study of Antimicrobial Effects of Clarithromycin Loaded PLGA Nanoparticles against Clinical Strains of Helicobacter pylori.

PubMed

Lotfipour, F; Valizadeh, H; Milani, M; Bahrami, N; Ghotaslou, R

2016-01-01

Clarithromycin (CLR) formulation was prepared as PLGA nanoparticles in order to enhance the therapeutic effects using the distinctive features of a nanoparticulate delivery system. CLR loaded PLGA nanoparticles were prepared by Quasi Emulsion Solvent Diffusion (QESD) method using Poly lactic-co-Glycolic Acid (PLGA) as a biodegradable polymer. Antibacterial activity of the prepared formulations was evaluated against clinical strains of Helicobacter pylori, isolated from gastric biopsies of patients with gastritis, duodenal ulcer, peptic ulcer, and gastroesophageal reflux disease undergoing endoscopy, by using agar dilution method.Spherical nanoparticles with relatively narrow size distribution (between 200 and 800 nm) in the size range of 305 ± 138, 344 ± 148 and 362 ± 110 nm were achieved for F22, F23 and F23 respectively. CLR encapsulation percentages were measured to be 57.4 ± 4.3 to 80.2 ± 4.0%. CLR loaded PLGA nanoparticles showed equal or enhanced eradication effect against H. pylori strains according to the declined MIC values in comparison with the untreated CLR.In conclusion, the prepared CLR nanoformulation showed appropriate physicochemical properties and improved activity against H. pylori that could be a suitable candidate for oral preparations. © Georg Thieme Verlag KG Stuttgart · New York.

Performance and limitations of p-version finite element method for problems containing singularities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wong, K.K.; Surana, K.S.

1996-10-01

In this paper, the authors investigate the performance of p-version Least Squares Finite Element Formulation (LSFEF) for a hyperbolic system of equations describing a one-dimensional radial flow of an upper-convected Maxwell fluid. This problem has r{sup 2} singularity in stress and r{sup {minus}1} singularity in velocity at r = 0. By carefully controlling the inner radius r{sub j}, Deborah number DE and Reynolds number Re, this problem can be used to simulate the following four classes of problems: (a) smooth linear problems, (b) smooth non-linear problems, (c) singular linear problems and (d) singular non-linear problems. They demonstrate that in casesmore » (a) and (b) the p-version method, in particular p-version LSFEF is meritorious. However, for cases (c) and (d) p-version LSFEF, even with extreme mesh refinement and very high p-levels, either produces wrong solutions, or results in the failure of the iterative solution procedure. Even though in the numerical studies they have considered p-version LSFEF for the radial flow of the upper-convected Maxwell fluid, the findings and conclusions are equally valid for other smooth and singular problems as well, regardless of the formulation strategy chosen and element approximation functions employed.« less

Surface chemistry of a pine-oil cleaner and other terpene mixtures with ozone on vinyl flooring tiles.

PubMed

Ham, Jason E; Wells, J Raymond

2011-04-01

Indoor environments are dynamic reactors where consumer products (such as cleaning agents, deodorants, and air fresheners) emit volatile organic compounds (VOCs) that can subsequently interact with indoor oxidants such as ozone (O(3)), hydroxyl radicals, and nitrate radicals. Typically, consumer products consist of mixtures of VOCs and semi-VOCs which can react in the gas-phase or on surfaces with these oxidants to generate a variety of oxygenated products. In this study, the reaction of a pine-oil cleaner (POC) with O(3) (100ppb) on a urethane-coated vinyl flooring tile was investigated at 5% and 50% relative humidity. These results were compared to previous α-terpineol+O(3) reactions on glass and vinyl surfaces. Additionally, other terpene and terpene alcohol mixtures were formulated to understand the emission profiles as seen in the POC data. Results showed that the α-terpineol+O(3) reaction products were the prominent species that were also observed in the POC/O(3) surface experiments. Furthermore, α-terpineol+O(3) reactions generate the largest fraction of oxygenated products even in equal mixtures of other terpene alcohols. This finding suggests that the judicial choice of terpene alcohols for inclusion in product formulations may be useful in reducing oxidation product emissions. Published by Elsevier Ltd.

Effects of the antiandrogens, vinclozolin and cyproterone acetate on gonadal development in the Japanese medaka (Oryzias latipes).

PubMed

Kiparissis, Yiannis; Metcalfe, Tracy L; Balch, Gordon C; Metcalfe, Chris D

2003-05-29

This study was focused on determining the effects of exposure to antiandrogens on the gonadal development of Japanese medaka (Oryzias latipes). Test compounds included the fungicide, vinclozolin and the clinical antiandrogen, cyproterone acetate. Newly hatched medaka were exposed to aqueous solutions of vinclozolin (2500 microg/l) and the vinclozolin fungicide formulation, Ronilan (1000 and 5000 microg/l) and cyproterone acetate (1 and 10 microg/l), for 3 months. Histological evaluation of the gonadal tissues of exposed fish indicated that the 5000 microg/l concentration of the vinclozolin formulation (Ronilan) induced a low incidence of intersex (i.e. testis-ova) and the 2500 microg/l concentration of vinclozolin-affected spermatogenesis in males. Also, the vinclozolin treatments induced moderate ovarian atresia. Cyproterone acetate also induced a low incidence of testis-ova, but in contrast to the vinclozolin treatment the amount of ovarian tissue in the testis-ova was equal to or greater than the amount of testicular tissue. In the cyproterone acetate treatments, both oogenesis and spermatogenesis were moderately inhibited at all test concentrations. The results of this study indicate that antiandrogens have the potential to alter testicular development and gametogenesis in fish. However, research is needed to determine the mechanisms by which antiandrogens affect fish.

Formulation of bi-layer matrix tablets of tramadol hydrochloride: Comparison of rate retarding ability of the incorporated hydrophilic polymers.

PubMed

Arif, Hasanul; Al-Masum, Abdullah; Sharmin, Florida; Reza, Selim; Sm Islam, Sm Ashraful

2015-05-01

Bi-layer tablets of tramadol hydrochloride were prepared by direct compression technique. Each tablet contains an instant release layer with a sustained release layer. The instant release layer was found to release the initial dose immediately within minutes. The instant release layer was combined with sustained release matrix made of varying quantity of Methocel K4M, Methocel K15MCR and Carbomer 974P. Bi-layer tablets were evaluated for various physical tests including weight variation, thickness and diameter, hardness and percent friability. Drug release from bi-layer tablet was studied in acidic medium and buffer medium for two and six hours respectively. Sustained release of tramadol hydrochloride was observed with a controlled fashion that was characteristic to the type and extent of polymer used. % Drug release from eight-hour dissolution study was fitted with several kinetic models. Mean dissolution time (MDT) and fractional dissolution values (T25%, T50% and T80%) were also calculated as well, to compare the retarding ability of the polymers. Methocel K15MCR was found to be the most effective in rate retardation of freely water-soluble tramadol hydrochloride compared to Methocel K4M and Capbomer 974P, when incorporated at equal ratio in the formulation.

Applications and limitations of lipid nanoparticles in dermal and transdermal drug delivery via the follicular route.

PubMed

Lauterbach, Andreas; Müller-Goymann, Christel C

2015-11-01

Lipid nanoparticles (LN) such as solid lipid nanoparticles (SLN) and nanolipid carriers (NLC) feature several claimed benefits for topical drug therapy including biocompatible ingredients, drug release modification, adhesion to the skin, and film formation with subsequent hydration of the superficial skin layers. However, penetration and permeation into and across deeper skin layers are restricted due to the barrier function of the stratum corneum (SC). As different kinds of nanoparticles provide the potential for penetration into hair follicles (HF) LN are applicable drug delivery systems (DDS) for this route in order to enhance the dermal and transdermal bioavailability of active pharmaceutical ingredients (API). Therefore, this review addresses the HF as application site, published formulations of LN which showed follicular penetration (FP), and characterization methods in order to identify and quantify the accumulation of API delivered by the LN in the HF. Since LN are based on lipids that appear in human sebum which is the predominant medium in HF an increased localization of the colloidal carriers as well as a promoted drug release may be assumed. Therefore, sebum-like lipid material and a size of less or equal 640 nm are appropriate specifications for FP of particulate formulations. Copyright © 2015 Elsevier B.V. All rights reserved.

Nonlinear programming extensions to rational function approximations of unsteady aerodynamics

NASA Technical Reports Server (NTRS)

Tiffany, Sherwood H.; Adams, William M., Jr.

1987-01-01

This paper deals with approximating unsteady generalized aerodynamic forces in the equations of motion of a flexible aircraft. Two methods of formulating these approximations are extended to include both the same flexibility in constraining them and the same methodology in optimizing nonlinear parameters as another currently used 'extended least-squares' method. Optimal selection of 'nonlinear' parameters is made in each of the three methods by use of the same nonlinear (nongradient) optimizer. The objective of the nonlinear optimization is to obtain rational approximations to the unsteady aerodynamics whose state-space realization is of lower order than that required when no optimization of the nonlinear terms is performed. The free 'linear' parameters are determined using least-squares matrix techniques on a Lagrange multiplier formulation of an objective function which incorporates selected linear equality constraints. State-space mathematical models resulting from the different approaches are described, and results are presented which show comparative evaluations from application of each of the extended methods to a numerical example. The results obtained for the example problem show a significant (up to 63 percent) reduction in the number of differential equations used to represent the unsteady aerodynamic forces in linear time-invariant equations of motion as compared to a conventional method in which nonlinear terms are not optimized.

Microbiological assay for the analysis of certain macrolides in pharmaceutical dosage forms.

PubMed

Mahmoudi, A; Fourar, R E-A; Boukhechem, M S; Zarkout, S

2015-08-01

Clarithromycin (CLA) and roxithromycin (ROX) are macrolide antibiotics with an expanded spectrum of activity that are commercially available as tablets. A microbiological assay, applying the cylinder-plate method and using a strain of Micrococcus luteus ATCC 9341 as test organism, has been used and validated for the quantification of two macrolide drugs; CLA and ROX in pure and pharmaceutical formulations. The validation of the proposed method was carried out for linearity, precision, accuracy and specificity. The linear dynamic ranges were from 0.1 to 0.5μg/mL for both compounds. Logarithmic calibration curve was obtained for each macrolide (r>0.989) with statistically equal slopes varying from 3.275 to 4.038, and a percentage relative standard deviation in the range of 0.24-0.92%. Moreover, the method was applied successfully for the assay of the studied drugs in pharmaceutical tablet dosage forms. Recovery from standard addition experiments in commercial products was 94.71-96.91% regarding clarithromycin and 93.94-98.12% regarding roxithromycin, with a precision (%RSD) 1.32-2.11%. Accordingly, this microbiological assay can be used for routine quality control analysis of titled drugs in tablet formulations. Copyright © 2015 Elsevier B.V. All rights reserved.

Large-scale computation of incompressible viscous flow by least-squares finite element method

NASA Technical Reports Server (NTRS)

Jiang, Bo-Nan; Lin, T. L.; Povinelli, Louis A.

1993-01-01

The least-squares finite element method (LSFEM) based on the velocity-pressure-vorticity formulation is applied to large-scale/three-dimensional steady incompressible Navier-Stokes problems. This method can accommodate equal-order interpolations and results in symmetric, positive definite algebraic system which can be solved effectively by simple iterative methods. The first-order velocity-Bernoulli function-vorticity formulation for incompressible viscous flows is also tested. For three-dimensional cases, an additional compatibility equation, i.e., the divergence of the vorticity vector should be zero, is included to make the first-order system elliptic. The simple substitution of the Newton's method is employed to linearize the partial differential equations, the LSFEM is used to obtain discretized equations, and the system of algebraic equations is solved using the Jacobi preconditioned conjugate gradient method which avoids formation of either element or global matrices (matrix-free) to achieve high efficiency. To show the validity of this scheme for large-scale computation, we give numerical results for 2D driven cavity problem at Re = 10000 with 408 x 400 bilinear elements. The flow in a 3D cavity is calculated at Re = 100, 400, and 1,000 with 50 x 50 x 50 trilinear elements. The Taylor-Goertler-like vortices are observed for Re = 1,000.

Asymptotically optimum multialternative sequential procedures for discernment of processes minimizing average length of observations

NASA Astrophysics Data System (ADS)

Fishman, M. M.

1985-01-01

The problem of multialternative sequential discernment of processes is formulated in terms of conditionally optimum procedures minimizing the average length of observations, without any probabilistic assumptions about any one occurring process, rather than in terms of Bayes procedures minimizing the average risk. The problem is to find the procedure that will transform inequalities into equalities. The problem is formulated for various models of signal observation and data processing: (1) discernment of signals from background interference by a multichannel system; (2) discernment of pulse sequences with unknown time delay; (3) discernment of harmonic signals with unknown frequency. An asymptotically optimum sequential procedure is constructed which compares the statistics of the likelihood ratio with the mean-weighted likelihood ratio and estimates the upper bound for conditional average lengths of observations. This procedure is shown to remain valid as the upper bound for the probability of erroneous partial solutions decreases approaching zero and the number of hypotheses increases approaching infinity. It also remains valid under certain special constraints on the probability such as a threshold. A comparison with a fixed-length procedure reveals that this sequential procedure decreases the length of observations to one quarter, on the average, when the probability of erroneous partial solutions is low.

Nutritional support of malnourished lactose intolerant African patients.

PubMed

O'Keefe, S J; Adam, J K; Cakata, E; Epstein, S

1984-09-01

The effectiveness of two commonly available liquid diets was assessed in 40 severely malnourished black African patients. All patients were shown to have normal xylose absorption. The diets were given according to the manufacturer's recommendations. One diet was lactose containing (LC diet) (150 g/d) and high protein (112 g/d), the other normal protein and lactose free (LF diet) (protein 67 g/d), total energy content being similar. Patients were randomly divided into two equal groups and allocated (blind) to one of the diets. Tolerance and nitrogen balance were assessed over two three day periods on half and then full strength formulations. Severe intolerant symptoms were observed in 50% of patients on half strength and 94% of patients on full strength lactose containing diet with evidence of malabsorption of fluid, nitrogen, and fat. Despite high stool nitrogen losses (3.75 +/- 1.04 g/d), however, positive nitrogen balance was achieved in most patients receiving the full strength LC formulation. On the other hand, the full strength LF diet was generally well tolerated and was associated with significantly lower faecal losses and positive nitrogen balance. The results indicate that high density lactose containing liquid formulae are poorly tolerated by severely malnourished black African patients, while lactose free formulae containing approximately 10 g nitrogen/d are well tolerated and result in positive nitrogen balance.

National Commission for Women Decree 1989 (No. 30 of 1989), 7 December 1989.

PubMed

1989-01-01

In 1989, Nigeria established a National Commission for Women to promote the general welfare of women. The Commission has the following objectives: 1) to promote the involvement of women in the development of human resources and of the nation, with equal rights and corresponding obligations; 2) to promote responsible motherhood and maternal health; 3) to improve women;s civic, political, cultural, social, and economic education; 4) to support the work of non-governmental organizations and act as coordinator between the government and women's organizations; 5) to encourage cooperative societies and activities among women and stimulate creative entrepreneurship in cottage industries and small-scale industries; 6) to formulate and propagate moral values in families and society and establish programs to inculcate moral education in women and children; and 7) to work toward the elimination of all practices which discriminate against and dehumanize women. In order to fulfill these objectives, the National Commission will formulate policies; establish state and local government council bodies to implement the policies; provide loans and vocational training; monitor and act as a liaison with appropriate organizations and international bodies, submit reports on women's education, counseling, health, and existing legislation; coordinate, grant aid, and evaluate the activities of women's voluntary organizations; and conduct general research and planning to improve the status of women.

Statistical label fusion with hierarchical performance models

PubMed Central

Asman, Andrew J.; Dagley, Alexander S.; Landman, Bennett A.

2014-01-01

Label fusion is a critical step in many image segmentation frameworks (e.g., multi-atlas segmentation) as it provides a mechanism for generalizing a collection of labeled examples into a single estimate of the underlying segmentation. In the multi-label case, typical label fusion algorithms treat all labels equally – fully neglecting the known, yet complex, anatomical relationships exhibited in the data. To address this problem, we propose a generalized statistical fusion framework using hierarchical models of rater performance. Building on the seminal work in statistical fusion, we reformulate the traditional rater performance model from a multi-tiered hierarchical perspective. This new approach provides a natural framework for leveraging known anatomical relationships and accurately modeling the types of errors that raters (or atlases) make within a hierarchically consistent formulation. Herein, we describe several contributions. First, we derive a theoretical advancement to the statistical fusion framework that enables the simultaneous estimation of multiple (hierarchical) performance models within the statistical fusion context. Second, we demonstrate that the proposed hierarchical formulation is highly amenable to the state-of-the-art advancements that have been made to the statistical fusion framework. Lastly, in an empirical whole-brain segmentation task we demonstrate substantial qualitative and significant quantitative improvement in overall segmentation accuracy. PMID:24817809

A Korean perspective on developing a global policy for advance directives.

PubMed

Kim, Soyoon; Hahm, Ki-Hyun; Park, Hyoung Wook; Kang, Hyun Hee; Sohn, Myongsei

2010-03-01

Despite the wide and daunting array of cross-cultural obstacles that the formulation of a global policy on advance directives will clearly pose, the need is equally evident. Specifically, the expansion of medical services driven by medical tourism, just to name one important example, makes this issue urgently relevant. While ensuring consistency across national borders, a global policy will have the additional and perhaps even more important effect of increasing the use of advance directives in clinical settings and enhancing their effectiveness within each country, regardless of where that country's state of the law currently stands. One cross-cultural issue that may represent a major obstacle in formulating, let alone applying, a global policy is whether patient autonomy as the underlying principle for the use of advance directives is a universal norm or a construct of western traditions that must be reconciled with alternative value systems that may place lesser significance on individual choice. A global policy, at a minimum, must emphasize respect for patient autonomy, provision of medical information, limits to the obligations for physicians, and portability. And though the development of a global policy will be no easy task, active engagement in close collaboration with the World Health Organization can make it possible.

Effect of scanning speed on continuous wave laser scribing of metal thin films: theory and experiment

NASA Astrophysics Data System (ADS)

Shahbazi, AmirHossein; Koohian, Ata; Madanipour, Khosro

2017-01-01

In this paper continuous wave laser scribing of the metal thin films have been investigated theoretically and experimentally. A formulation is presented based on parameters like beam power, spot size, scanning speed and fluence thresholds. The role of speed on the transient temperature and tracks width is studied numerically. By using two frameworks of pulsed laser ablation of thin films and laser printing on paper, the relation between ablation width and scanning speed has been derived. Furthermore, various speeds of the focused 450 nm continuous laser diode with an elliptical beam spot applied to a 290 nm copper thin film coated on glass, experimentally. The beam power was 150 mW after spatial filtering. By fitting the theoretical formulation to the experimental data, the threshold fluence and energy were obtained to be 13.2 J mm-2 and 414~μ J respectively. An anticipated theoretical parameter named equilibrium~border was verified experimentally. It shows that in the scribing of the 290 nm copper thin film, at a distance where the intensity reaches about 1/e of its maximum value, the absorbed fluence on the surface is equal to zero. Therefore the application of continuous laser in metal thin film ablation has different mechanism from pulsed laser drilling and beam scanning in printers.

Isoniazid, Pyrazinamide and Rifampicin Content Variation in Split Fixed-Dose Combination Tablets

PubMed Central

Pouplin, Thomas; Phuong, Pham Nguyen; Toi, Pham Van; Nguyen Pouplin, Julie; Farrar, Jeremy

2014-01-01

Setting In most developing countries, paediatric tuberculosis is treated with split tablets leading to potential inaccuracy in the dose delivery and drug exposure. There is no data on the quality of first-line drugs content in split fixed-dose combination tablets. Objective To determine Isoniazid, Pyrazinamide and Rifampicin content uniformity in split FDC tablets used in the treatment of childhood tuberculosis. Design Drug contents of 15 whole tablets, 30 half tablets and 36 third tablets were analysed by high performance liquid chromatography. The content uniformity was assessed by comparing drug content measured in split portions with their expected amounts and the quality of split portions was assessed applying qualitative specifications for whole tablets. Results All whole tablets measurements fell into the USP proxy for the three drugs. But a significant number of half and third portions was found outside the tolerated variation range and the split formulation failed the requirements for content uniformity. To correct for the inaccuracy of splitting the tablets into equal portions, a weight-adjustment strategy was used but this did not improve the findings. Conclusion In split tablets the content of the three drugs is non-uniform and exceeded the USP recommendations. There is an absolute need to make child-friendly formulations available for the treatment of childhood tuberculosis. PMID:25004128

Isoniazid, pyrazinamide and rifampicin content variation in split fixed-dose combination tablets.

PubMed

Pouplin, Thomas; Phuong, Pham Nguyen; Toi, Pham Van; Nguyen Pouplin, Julie; Farrar, Jeremy

2014-01-01

In most developing countries, paediatric tuberculosis is treated with split tablets leading to potential inaccuracy in the dose delivery and drug exposure. There is no data on the quality of first-line drugs content in split fixed-dose combination tablets. To determine Isoniazid, Pyrazinamide and Rifampicin content uniformity in split FDC tablets used in the treatment of childhood tuberculosis. Drug contents of 15 whole tablets, 30 half tablets and 36 third tablets were analysed by high performance liquid chromatography. The content uniformity was assessed by comparing drug content measured in split portions with their expected amounts and the quality of split portions was assessed applying qualitative specifications for whole tablets. All whole tablets measurements fell into the USP proxy for the three drugs. But a significant number of half and third portions was found outside the tolerated variation range and the split formulation failed the requirements for content uniformity. To correct for the inaccuracy of splitting the tablets into equal portions, a weight-adjustment strategy was used but this did not improve the findings. In split tablets the content of the three drugs is non-uniform and exceeded the USP recommendations. There is an absolute need to make child-friendly formulations available for the treatment of childhood tuberculosis.

Combination of hyperthermia and photodynamic therapy on mesenchymal stem cell line treated with chloroaluminum phthalocyanine magnetic-nanoemulsion

NASA Astrophysics Data System (ADS)

de Paula, Leonardo B.; Primo, Fernando L.; Pinto, Marcelo R.; Morais, Paulo C.; Tedesco, Antonio C.

2015-04-01

The present study reports on the preparation and the cell viability assay of two nanoemulsions loaded with magnetic nanoparticle and chloroaluminum phthalocyanine. The preparations contain equal amount of chloroaluminum phthalocyanine (0.05 mg/mL) but different contents of magnetic nanoparticle (0.15×1013 or 1.50×1013 particle/mL). The human bone marrow mesenchymal stem cell line was used as the model to assess the cell viability and this type of cell can be used as a model to mimic cancer stem cells. The cell viability assays were performed in isolated as well as under combined magnetic hyperthermia and photodynamic therapy treatments. We found from the cell viability assay that under the hyperthermia treatment (1 MHz and 40 Oe magnetic field amplitude) the cell viability reduction was about 10%, regardless the magnetic nanoparticle content within the magnetic nanoparticle/chloroaluminum phthalocyanine formulation. However, cell viability reduction of about 50% and 60% were found while applying the photodynamic therapy treatment using the magnetic nanoparticle/chloroaluminum phthalocyanine formulation containing 0.15×1013 or 1.50×1013 magnetic particle/mL, respectively. Finally, an average reduction in cell viability of about 66% was found while combining the hyperthermia and photodynamic therapy treatments.

[Comparative studies on the bioavailability of nicergoline from two different steady-state preparations].

PubMed

Kohlenberg-Müller, K; Meier, D H; Kunz, K; Wauschkuhn, C H; Schaffler, K

1991-07-01

Comparative Studies on the Bioavailability of Nicergoline from Two Different Preparations in Steady State The bioavailability of nicergoline (CAS 27848-84-6) in a new 30 mg tablet and a 10 mg dragee formulation (Sermion) was evaluated under steady state conditions in 18 healthy male volunteers between the age of 21 and 37 years. During the run-in phase, the volunteers received on 7 consecutive days 30 mg nicergoline either 1 x 30 mg/d tablet (test substance) or 3 x 10 mg dragees (reference). On day 8, after intake of 1 x 30 mg in a 24 h interval or 1 x 10 mg in a 8 h interval respectively, the plasma concentrations of the nicergoline metabolite 10-methoxy-6-methyl-ergoline-8 beta-methanol (MDL) were measured. The area under the plasma concentrations in the 24 h interval after administering the 30 mg tablet was not 3 times greater as to be expected; it was by a factor of 4 significantly greater than the area under the curve of the 10 mg dragee in the 8 h interval. Therefore, nicergoline has a higher availability in the 30 mg tablet than in the 10 mg dragee form. Both formulations were equally well tolerated.

Fracture resistant, antibiofilm adherent, self-assembled PMMA/ZnO nanoformulations for biomedical applications: physico-chemical and biological perspectives of nano reinforcement

NASA Astrophysics Data System (ADS)

Raj, Indu; Mozetic, Miran; Jayachandran, V. P.; Jose, Jiya; Thomas, Sabu; Kalarikkal, Nandakumar

2018-07-01

Antimicrobial, antibiofilm adherent, fracture resistant nano zinc oxide (ZnO NP) formulations based on poly methyl methacrylate (PMMA) matrix were developed using a facile ex situ compression moulding technique. These formulations demonstrated potent, long-term biofilm-resisting effects against Candida albicans (9000 CFU to 1000 CFU) and Streptococcus mutans. Proposed mechanism of biofilm resistance was the release of metallic ions/metal oxide by ‘particle-corrosion’. MTT and cellular proliferation assays confirmed both qualitatively and quantitatively equal human skin fibroblast cell line proliferations (approximately 75%) on both PMMA/ZnO formulation and neat PMMA. Mechanical performance was evaluated over a range of filler loading, and theoretical models derived from Einstein, Guth, Thomas and Quemade were chosen to predict the modulus of the nanoformulations. All the models gave better fitting at lower filler content, which could be due to restricted mobility of the polymer chains by the constrained zone/interfacial rigid amorphous zone and also due to stress absorption by the highly energized NPs. Fracture mechanics were clearly described based on substantial experimental evidence surrounding crack prevention in the initial zones of fracture. Filler‑polymer interactions at the morphological and structural levels were elucidated through FTIR, XRD, SEM, TEM and AFM analyses. Major clinical challenges in cancer patient rehabilitation and routine denture therapy are frequent breakage of the prostheses and microbial colonization on the prostheses/tissues. In the present study, we succeeded in developing an antimicrobial, mechanically improved fracture resistant, biocompatible nanoformulation in a facile manner without the bio-toxic effects of surface modifiers/functionalization. This PMMA/ZnO nanoformulation could serve as a cost effective breakthrough biomaterial in the field of prosthetic rehabilitation and local drug delivery scaffolds for abused tissues.

Differential geometry based solvation model I: Eulerian formulation

NASA Astrophysics Data System (ADS)

Chen, Zhan; Baker, Nathan A.; Wei, G. W.

2010-11-01

This paper presents a differential geometry based model for the analysis and computation of the equilibrium property of solvation. Differential geometry theory of surfaces is utilized to define and construct smooth interfaces with good stability and differentiability for use in characterizing the solvent-solute boundaries and in generating continuous dielectric functions across the computational domain. A total free energy functional is constructed to couple polar and nonpolar contributions to the solvation process. Geometric measure theory is employed to rigorously convert a Lagrangian formulation of the surface energy into an Eulerian formulation so as to bring all energy terms into an equal footing. By optimizing the total free energy functional, we derive coupled generalized Poisson-Boltzmann equation (GPBE) and generalized geometric flow equation (GGFE) for the electrostatic potential and the construction of realistic solvent-solute boundaries, respectively. By solving the coupled GPBE and GGFE, we obtain the electrostatic potential, the solvent-solute boundary profile, and the smooth dielectric function, and thereby improve the accuracy and stability of implicit solvation calculations. We also design efficient second-order numerical schemes for the solution of the GPBE and GGFE. Matrix resulted from the discretization of the GPBE is accelerated with appropriate preconditioners. An alternative direct implicit (ADI) scheme is designed to improve the stability of solving the GGFE. Two iterative approaches are designed to solve the coupled system of nonlinear partial differential equations. Extensive numerical experiments are designed to validate the present theoretical model, test computational methods, and optimize numerical algorithms. Example solvation analysis of both small compounds and proteins are carried out to further demonstrate the accuracy, stability, efficiency and robustness of the present new model and numerical approaches. Comparison is given to both experimental and theoretical results in the literature.

Differential geometry based solvation model I: Eulerian formulation

PubMed Central

Chen, Zhan; Baker, Nathan A.; Wei, G. W.

2010-01-01

This paper presents a differential geometry based model for the analysis and computation of the equilibrium property of solvation. Differential geometry theory of surfaces is utilized to define and construct smooth interfaces with good stability and differentiability for use in characterizing the solvent-solute boundaries and in generating continuous dielectric functions across the computational domain. A total free energy functional is constructed to couple polar and nonpolar contributions to the salvation process. Geometric measure theory is employed to rigorously convert a Lagrangian formulation of the surface energy into an Eulerian formulation so as to bring all energy terms into an equal footing. By minimizing the total free energy functional, we derive coupled generalized Poisson-Boltzmann equation (GPBE) and generalized geometric flow equation (GGFE) for the electrostatic potential and the construction of realistic solvent-solute boundaries, respectively. By solving the coupled GPBE and GGFE, we obtain the electrostatic potential, the solvent-solute boundary profile, and the smooth dielectric function, and thereby improve the accuracy and stability of implicit solvation calculations. We also design efficient second order numerical schemes for the solution of the GPBE and GGFE. Matrix resulted from the discretization of the GPBE is accelerated with appropriate preconditioners. An alternative direct implicit (ADI) scheme is designed to improve the stability of solving the GGFE. Two iterative approaches are designed to solve the coupled system of nonlinear partial differential equations. Extensive numerical experiments are designed to validate the present theoretical model, test computational methods, and optimize numerical algorithms. Example solvation analysis of both small compounds and proteins are carried out to further demonstrate the accuracy, stability, efficiency and robustness of the present new model and numerical approaches. Comparison is given to both experimental and theoretical results in the literature. PMID:20938489

Experimental and numerical characterisation of the elasto-plastic properties of bovine trabecular bone and a trabecular bone analogue.

PubMed

Kelly, Nicola; McGarry, J Patrick

2012-05-01

The inelastic pressure dependent compressive behaviour of bovine trabecular bone is investigated through experimental and computational analysis. Two loading configurations are implemented, uniaxial and confined compression, providing two distinct loading paths in the von Mises-pressure stress plane. Experimental results reveal distinctive yielding followed by a constant nominal stress plateau for both uniaxial and confined compression. Computational simulation of the experimental tests using the Drucker-Prager and Mohr-Coulomb plasticity models fails to capture the confined compression behaviour of trabecular bone. The high pressure developed during confined compression does not result in plastic deformation using these formulations, and a near elastic response is computed. In contrast, the crushable foam plasticity models provide accurate simulation of the confined compression tests, with distinctive yield and plateau behaviour being predicted. The elliptical yield surfaces of the crushable foam formulations in the von Mises-pressure stress plane accurately characterise the plastic behaviour of trabecular bone. Results reveal that the hydrostatic yield stress is equal to the uniaxial yield stress for trabecular bone, demonstrating the importance of accurate characterisation and simulation of the pressure dependent plasticity. It is also demonstrated in this study that a commercially available trabecular bone analogue material, cellular rigid polyurethane foam, exhibits similar pressure dependent yield behaviour, despite having a lower stiffness and strength than trabecular bone. This study provides a novel insight into the pressure dependent yield behaviour of trabecular bone, demonstrating the inadequacy of uniaxial testing alone. For the first time, crushable foam plasticity formulations are implemented for trabecular bone. The enhanced understanding of the inelastic behaviour of trabecular bone established in this study will allow for more realistic simulation of orthopaedic device implantation and failure. Copyright © 2011 Elsevier Ltd. All rights reserved.

Polymer-coated albumin microspheres as carriers for intravascular tumour targeting of cisplatin.

PubMed

Verrijk, R; Smolders, I J; McVie, J G; Begg, A C

1991-01-01

We used a poly-lactide-co-glycolide polymer (PLAGA 50:50) to formulate cisplatin (cDDP) into microspheres designed for intravascular administration. Two systems were developed. PLAGA-coated albumin microspheres and microspheres consisting of PLAGA only. PLAGA-coated microspheres displayed a mean diameter of 31.8 +/- 0.9 microns and a payload of 7.5% cDDP (w/w). Solid PLAGA microspheres exhibited a mean diameter of 19.4 +/- 0.6 microns and a payload of 20% cDDP. Release characteristics and in vitro effects on L1210 leukemia and B16 melanoma cell lines were investigated. Both types of microsphere overcame the initial rapid release of cDDP (burst effect), and PLAGA-coated albumin microspheres also showed a lag phase of approximately 30 min before cDDP release began. PLAGA-coated albumin microspheres released most of their payload through diffusion, and the coating eventually cracked after 7 days' incubation in saline supplemented with 0.1% Tween at 37 degrees C, enabling the release of any cDDP remaining. Effects of platinum, pre-released from PLAGA-coated albumin microspheres on the in vitro growth of L1210 cells were comparable with those of standard formulations (dissolved) of cDDP. Material released from non-drug-loaded PLAGA microspheres had no effect on L1210 cell growth, suggesting the absence of cytotoxic compounds in the matrix. The colony-forming ability of B16 cells was also equally inhibited by standard cDDP and pre-released drug. These studies show that formulation of cDDP in PLAGA-based microspheres prevents the rapid burst effect of cDDP seen in previous preparations and offers an improved system of administration for hepatic artery infusion or adjuvant therapy, enabling better clinical handling and the promise of a higher ratio of tumour tissue to normal tissue.

Oral bioavailability enhancement of raloxifene by developing microemulsion using D-optimal mixture design: optimization and in-vivo pharmacokinetic study.

PubMed

Shah, Nirmal; Seth, Avinashkumar; Balaraman, R; Sailor, Girish; Javia, Ankur; Gohil, Dipti

2018-04-01

The objective of this work was to utilize a potential of microemulsion for the improvement in oral bioavailability of raloxifene hydrochloride, a BCS class-II drug with 2% bioavailability. Drug-loaded microemulsion was prepared by water titration method using Capmul MCM C8, Tween 20, and Polyethylene glycol 400 as oil, surfactant, and co-surfactant respectively. The pseudo-ternary phase diagram was constructed between oil and surfactants mixture to obtain appropriate components and their concentration ranges that result in large existence area of microemulsion. D-optimal mixture design was utilized as a statistical tool for optimization of microemulsion considering oil, S mix , and water as independent variables with percentage transmittance and globule size as dependent variables. The optimized formulation showed 100 ± 0.1% transmittance and 17.85 ± 2.78 nm globule size which was identically equal with the predicted values of dependent variables given by the design expert software. The optimized microemulsion showed pronounced enhancement in release rate compared to plain drug suspension following diffusion controlled release mechanism by the Higuchi model. The formulation showed zeta potential of value -5.88 ± 1.14 mV that imparts good stability to drug loaded microemulsion dispersion. Surface morphology study with transmission electron microscope showed discrete spherical nano sized globules with smooth surface. In-vivo pharmacokinetic study of optimized microemulsion formulation in Wistar rats showed 4.29-fold enhancements in bioavailability. Stability study showed adequate results for various parameters checked up to six months. These results reveal the potential of microemulsion for significant improvement in oral bioavailability of poorly soluble raloxifene hydrochloride.

Fracture resistant, antibiofilm adherent, self-assembled PMMA/ZnO nanoformulations for biomedical applications: physico-chemical and biological perspectives of nano reinforcement.

PubMed

Raj, Indu; Mozetic, Miran; Jayachandran, V P; Jose, Jiya; Thomas, Sabu; Kalarikkal, Nandakumar

2018-07-27

Antimicrobial, antibiofilm adherent, fracture resistant nano zinc oxide (ZnO NP) formulations based on poly methyl methacrylate (PMMA) matrix were developed using a facile ex situ compression moulding technique. These formulations demonstrated potent, long-term biofilm-resisting effects against Candida albicans (9000 CFU to 1000 CFU) and Streptococcus mutans. Proposed mechanism of biofilm resistance was the release of metallic ions/metal oxide by 'particle-corrosion'. MTT and cellular proliferation assays confirmed both qualitatively and quantitatively equal human skin fibroblast cell line proliferations (approximately 75%) on both PMMA/ZnO formulation and neat PMMA. Mechanical performance was evaluated over a range of filler loading, and theoretical models derived from Einstein, Guth, Thomas and Quemade were chosen to predict the modulus of the nanoformulations. All the models gave better fitting at lower filler content, which could be due to restricted mobility of the polymer chains by the constrained zone/interfacial rigid amorphous zone and also due to stress absorption by the highly energized NPs. Fracture mechanics were clearly described based on substantial experimental evidence surrounding crack prevention in the initial zones of fracture. Filler-polymer interactions at the morphological and structural levels were elucidated through FTIR, XRD, SEM, TEM and AFM analyses. Major clinical challenges in cancer patient rehabilitation and routine denture therapy are frequent breakage of the prostheses and microbial colonization on the prostheses/tissues. In the present study, we succeeded in developing an antimicrobial, mechanically improved fracture resistant, biocompatible nanoformulation in a facile manner without the bio-toxic effects of surface modifiers/functionalization. This PMMA/ZnO nanoformulation could serve as a cost effective breakthrough biomaterial in the field of prosthetic rehabilitation and local drug delivery scaffolds for abused tissues.

Techniques for evaluating digestibility of energy, amino acids, phosphorus, and calcium in feed ingredients for pigs.

PubMed

Zhang, Fengrui; Adeola, Olayiwola

2017-12-01

Sound feed formulation is dependent upon precise evaluation of energy and nutrients values in feed ingredients. Hence the methodology to determine the digestibility of energy and nutrients in feedstuffs should be chosen carefully before conducting experiments. The direct and difference procedures are widely used to determine the digestibility of energy and nutrients in feedstuffs. The direct procedure is normally considered when the test feedstuff can be formulated as the sole source of the component of interest in the test diet. However, in some cases where test ingredients can only be formulated to replace a portion of the basal diet to provide the component of interest, the difference procedure can be applied to get equally robust values. Based on components of interest, ileal digesta or feces can be collected, and different sample collection processes can be used. For example, for amino acids (AA), to avoid the interference of fermentation in the hind gut, ileal digesta samples are collected to determine the ileal digestibility and simple T-cannula and index method are commonly used techniques for AA digestibility analysis. For energy, phosphorus, and calcium, normally fecal samples will be collected to determine the total tract digestibility, and therefore the total collection method is recommended to obtain more accurate estimates. Concerns with the use of apparent digestibility values include different estimated values from different inclusion level and non-additivity in mixtures of feed ingredients. These concerns can be overcome by using standardized digestibility, or true digestibility, by correcting endogenous losses of components from apparent digestibility values. In this review, methodologies used to determine energy and nutrients digestibility in pigs are discussed. It is suggested that the methodology should be carefully selected based on the component of interest, feed ingredients, and available experimental facilities.

Adaptation and evaluation of the bottle assay for monitoring insecticide resistance in disease vector mosquitoes in the Peruvian Amazon

PubMed Central

Zamora Perea, Elvira; Balta León, Rosario; Palomino Salcedo, Miriam; Brogdon, William G; Devine, Gregor J

2009-01-01

Background The purpose of this study was to establish whether the "bottle assay", a tool for monitoring insecticide resistance in mosquitoes, can complement and augment the capabilities of the established WHO assay, particularly in resource-poor, logistically challenging environments. Methods Laboratory reared Aedes aegypti and field collected Anopheles darlingi and Anopheles albimanus were used to assess the suitability of locally sourced solvents and formulated insecticides for use with the bottle assay. Using these adapted protocols, the ability of the bottle assay and the WHO assay to discriminate between deltamethrin-resistant Anopheles albimanus populations was compared. The diagnostic dose of deltamethrin that would identify resistance in currently susceptible populations of An. darlingi and Ae. aegypti was defined. The robustness of the bottle assay during a surveillance exercise in the Amazon was assessed. Results The bottle assay (using technical or formulated material) and the WHO assay were equally able to differentiate deltamethrin-resistant and susceptible An. albimanus populations. A diagnostic dose of 10 μg a.i./bottle was identified as the most sensitive discriminating dose for characterizing resistance in An. darlingi and Ae. aegypti. Treated bottles, prepared using locally sourced solvents and insecticide formulations, can be stored for > 14 days and used three times. Bottles can be stored and transported under local conditions and field-assays can be completed in a single evening. Conclusion The flexible and portable nature of the bottle assay and the ready availability of its components make it a potentially robust and useful tool for monitoring insecticide resistance and efficacy in remote areas that require minimal cost tools. PMID:19728871

Optimal landing of a helicopter in autorotation

NASA Technical Reports Server (NTRS)

Lee, A. Y. N.

1985-01-01

Gliding descent in autorotation is a maneuver used by helicopter pilots in case of engine failure. The landing of a helicopter in autorotation is formulated as a nonlinear optimal control problem. The OH-58A helicopter was used. Helicopter vertical and horizontal velocities, vertical and horizontal displacement, and the rotor angle speed were modeled. An empirical approximation for the induced veloctiy in the vortex-ring state were provided. The cost function of the optimal control problem is a weighted sum of the squared horizontal and vertical components of the helicopter velocity at touchdown. Optimal trajectories are calculated for entry conditions well within the horizontal-vertical restriction curve, with the helicopter initially in hover or forwared flight. The resultant two-point boundary value problem with path equality constraints was successfully solved using the Sequential Gradient Restoration Technique.

HIV model incorporating differential progression for treatment-naive and treatment-experienced infectives.

PubMed

Chigidi, Esther; Lungu, Edward M

2009-07-01

We formulate an HIV/AIDS deterministic model which incorporates differential infectivity and disease progression for treatment-naive and treatment-experienced HIV/AIDS infectives. To illustrate our model, we have applied it to estimate adult HIV prevalence, the HIV population, the number of new infectives and the number of AIDS deaths for Botswana for the period 1984 to 2012. It is found that the prevalence peaked in the year 2000 and the HIV population is now decreasing. We have also found that under the current conditions, the reproduction number is Rc approximately 13, which is less than the 2004 estimate of Rc approximately equal 4 by [11] and [13]. The results in this study suggest that the HAART program has yielded positive results for Botswana.

Poisson's ratio of fiber-reinforced composites

NASA Astrophysics Data System (ADS)

Christiansson, Henrik; Helsing, Johan

1996-05-01

Poisson's ratio flow diagrams, that is, the Poisson's ratio versus the fiber fraction, are obtained numerically for hexagonal arrays of elastic circular fibers in an elastic matrix. High numerical accuracy is achieved through the use of an interface integral equation method. Questions concerning fixed point theorems and the validity of existing asymptotic relations are investigated and partially resolved. Our findings for the transverse effective Poisson's ratio, together with earlier results for random systems by other authors, make it possible to formulate a general statement for Poisson's ratio flow diagrams: For composites with circular fibers and where the phase Poisson's ratios are equal to 1/3, the system with the lowest stiffness ratio has the highest Poisson's ratio. For other choices of the elastic moduli for the phases, no simple statement can be made.

Newer developments on self-modeling curve resolution implementing equality and unimodality constraints.

PubMed

Beyramysoltan, Samira; Abdollahi, Hamid; Rajkó, Róbert

2014-05-27

Analytical self-modeling curve resolution (SMCR) methods resolve data sets to a range of feasible solutions using only non-negative constraints. The Lawton-Sylvestre method was the first direct method to analyze a two-component system. It was generalized as a Borgen plot for determining the feasible regions in three-component systems. It seems that a geometrical view is required for considering curve resolution methods, because the complicated (only algebraic) conceptions caused a stop in the general study of Borgen's work for 20 years. Rajkó and István revised and elucidated the principles of existing theory in SMCR methods and subsequently introduced computational geometry tools for developing an algorithm to draw Borgen plots in three-component systems. These developments are theoretical inventions and the formulations are not always able to be given in close form or regularized formalism, especially for geometric descriptions, that is why several algorithms should have been developed and provided for even the theoretical deductions and determinations. In this study, analytical SMCR methods are revised and described using simple concepts. The details of a drawing algorithm for a developmental type of Borgen plot are given. Additionally, for the first time in the literature, equality and unimodality constraints are successfully implemented in the Lawton-Sylvestre method. To this end, a new state-of-the-art procedure is proposed to impose equality constraint in Borgen plots. Two- and three-component HPLC-DAD data set were simulated and analyzed by the new analytical curve resolution methods with and without additional constraints. Detailed descriptions and explanations are given based on the obtained abstract spaces. Copyright © 2014 Elsevier B.V. All rights reserved.

Distribution of health care resources in Mongolia using the Gini coefficient.

PubMed

Erdenee, Oyunchimeg; Paramita, Sekar Ayu; Yamazaki, Chiho; Koyama, Hiroshi

2017-08-29

Attaining the perfect balance of health care resources is probably impracticable; however, it is possible to achieve improvements in the distribution of these resources. In terms of the distribution of health resources, equal access to these resources would make health services available to all people. The aim of this study was to compare the distributions of health care resources in urban, suburban, and rural areas of Mongolia. We compared urban and rural areas using the Mann-Whitney U test and further investigated the distribution equality of physicians, nurses, and hospital beds throughout Mongolia using the Gini coefficient-a common measure of distribution derived from the Lorenz curve. Two indicators were calculated: the distribution per 10 000 population and the distribution per 1000 km 2 area. Urban and rural areas were significantly different only in the distribution of physicians per population. However, in terms of the distribution per area, there were statistical differences in physicians, nurses, and hospital beds. We also found that distributions per population unit were equal, with Gini coefficients for physicians, nurses, and hospital beds of 0.18, 0.07, and 0.06, respectively. Distributions per area unit were highly unequal, with Gini coefficients for physicians, nurses, and hospital beds of 0.74, 0.67, and 0.69, respectively. Although the distributions of health care resources per population were adequate for the population size, a striking difference was found in terms of the distributions per geographical area. Because of the nomadic lifestyle of rural and remote populations in Mongolia, geographical imbalances need to be taken into consideration when formulating policy, rather than simply increasing the number of health care resources.

Decree-Law No. 426/88, 18 November 1988.

PubMed

1988-01-01

A 1988 Decree-Law of Portugal facilitates preventative and remedial actions with respect to discrimination against women in the civil service. Under the Decree-Law, discriminatory admission and promotion practices are forbidden in all levels of the central administration, independent agencies, the social security administration, and regional administrations. Practices forbidden include those having an unintended discriminatory impact and all job-related differentiation based on sex, directly or indirectly, as in cases where reference is made to a woman's marital or family status. The Decree-Law guarantees equality of remuneration for male and female workers for equal work or work of equal value and prohibits restrictions based on sex in entrance examinations and job advertising. Practices not considered discriminatory include those designed to correct the imbalance between male and female employees and those undertaken to protect maternity. Moreover, work may be restricted that poses risks or the potential of risk to genetic functions and jobs may be conditioned on sex if sex is essential to the performance of the job. Major procedural provisions are as follows: 1) the burden of proving that a decision affecting the position of a female civil servant is justified and does not violate the law is placed on the public authority accused of practicing discrimination; 2) workers have the right to challenge any act of alleged discrimination and may be represented by the pertinent body of collective representation in any proceeding arising under the Decree-Law; 3) no worker may be punished or otherwise penalized for alleging discrimination; 4) directors or workers whose actions have been judged as discriminatory are subject to disciplinary proceedings; and 5) any administrative authority conducting an inquiry regarding alleged discrimination or adopting disciplinary measures in connection with unfounded allegations of the practice of discrimination must obtain from the Commission for Equality in the Workplace an advisory opinion on the matter examined. The Decree-Law also redefines the powers of the Commission for Equality in the Workplace as follows: 1) to propose legislative and administrative measures to any minister empowered to initiate or formulate them; 2) to conduct pertinent studies and informal inquiries; 3) to publicize relevant facts and data; 4) to write and approve written opinions when so requested by the courts, unions, or labor relations authorities; and 5) to conduct investigations of job-related discriminatory practices or to request that such investigations be made by the Labor Inspection Office.

A seamless phase IIB/III adaptive outcome trial: design rationale and implementation challenges.

PubMed

Chen, Y H Joshua; Gesser, Richard; Luxembourg, Alain

2015-02-01

The licensed four-valent prophylactic human papillomavirus vaccine is highly efficacious in preventing cervical, vulvar, vaginal, and anal cancers and related precancers caused by human papillomavirus types 6, 11, 16, and 18. These four types account for approximately 70% of cervical cancers. A nine-valent human papillomavirus vaccine, including the four original types (6, 11, 16, and 18) plus the next five most prevalent types in cervical cancer (31, 33, 45, 52, and 58) could provide approximately 90% overall cervical cancer coverage. To expedite the nine-valent human papillomavirus vaccine clinical development, an adaptive, seamless Phase IIB/III outcome trial with ∼ 15,000 subjects was conducted to facilitate dose formulation selection and provide pivotal evidence of safety and efficacy for regulatory registrations. We discuss the design rationale and implementation challenges of the outcome trial, focusing on the adaptive feature of the seamless Phase IIB/III design. Subjects were enrolled in two parts (Part A and Part B). Approximately 1240 women, 16-26 years of age, were enrolled in Part A for Phase IIB evaluation and equally randomized to one of three dose formulations of the nine-valent human papillomavirus vaccine or the four-valent human papillomavirus vaccine (active control). Based on an interim analysis of immunogenicity and safety, one dose formulation of the nine-valent human papillomavirus vaccine was selected for evaluation in the Phase III part of the study. Subjects enrolled in Part A who received the selected dose formulation of the nine-valent human papillomavirus vaccine or four-valent human papillomavirus vaccine continued to be followed up and contributed to the final efficacy and safety analyses. In addition, ∼ 13,400 women 16-26 years of age were enrolled in Part B, randomized to nine-valent human papillomavirus vaccine at the selected dose formulation or four-valent human papillomavirus vaccine, and followed for immunogenicity, efficacy, and safety. A seamless Phase IIB/III design was justified by the extensive pre-existing knowledge of the licensed four-valent human papillomavirus vaccine and the development objectives for the nine-valent human papillomavirus vaccine. Subjects enrolled in Part A who received either the selected nine-valent human papillomavirus formulation or four-valent human papillomavirus vaccine contributed ∼ 10% of person-years of follow-up due to its earlier start-thereby maximizing the overall efficiency of the trial. Some of the challenges encountered in the implementation of the adaptive design included practical considerations during Phase IIB formulation selection by internal and external committees, End-of-Phase II discussion with health authorities and managing changes in the assay for immunological endpoints. Application of the experience and lesson learned from this seamless adaptive design to other clinical programs may depend on case-by-case consideration. A seamless Phase IIB/III adaptive design was successfully implemented in this large outcome study. The development time of the second-generation nine-valent human papillomavirus vaccine was shortened due to improved statistical efficiency. © The Author(s) 2014.

To Investigate the Absorption, Dynamic Contact Angle and Printability Effects of Synthetic Zeolite Pigments in an Inkjet Receptive Coating

NASA Astrophysics Data System (ADS)

Jalindre, Swaraj Sunil

Ink absorption performance in inkjet receptive coatings containing synthetic zeolite pigments was studied. Coating pigment pore and particle size distribution are the key parameters that influence in modifying media surface properties, thus affecting the rate of ink penetration and drying time (Scholkopf, et al. 2004). The primary objective of this study was: (1) to investigate the synthetic zeolite pigment effects on inkjet ink absorption, dynamic contact angle and printability, and (2) to evaluate these novel synthetic zeolite pigments in replacing the fumed silica pigments in conventional inkjet receptive coatings. In this research study, single pigment coating formulations (in equal P:B ratio) were prepared using microporous synthetic zeolite pigments (5A, Organophilic and 13X) and polyvinyl alcohol (PVOH) binder. The laboratory-coated samples were characterized for absorption, air permeance, roughness, drying time, wettability and print fidelity. Based on the rheological data, it was found that the synthetic zeolite formulated coatings depicted a Newtonian flow behavior at low shear; while the industry accepted fumed silica based coatings displayed a characteristically high pseudoplastic flow behavior. Our coated samples generated using microporous synthetic zeolite pigments produced low absorption, reduced wettability and accelerated ink drying characteristics. These characteristics were caused due to the synthetic zeolite pigments, which resulted in relatively closed surface structure coated samples. The research suggested that no single selected synthetic zeolite coating performed better than the conventional fumed silica based coatings. Experimental data also showed that there was no apparent relationship between synthetic zeolite pigment pore sizes and inkjet ink absorption. For future research, above coated samples should be evaluated for pore size distribution using Mercury Porosimeter, which quantifies surface porosity of coated samples. This presented approach can be easily used for investigating other such microporous coating pigments in formulating inkjet receptive coating. The research findings will benefit the coating formulators, engineers and material science students, in understanding the absorption characteristics of selected synthetic zeolite pigments thereby encouraging them in identifying other such alternative pigments in conventional inkjet receptive coatings.

Monitoring persistence of the entomopathogenic fungus Metarhizium anisopliae under simulated field conditions with the aim of controlling adult Aedes aegypti (Diptera: Culicidae)

PubMed Central

2014-01-01

Background Entomopathogenic fungi are potential candidates for use in integrated vector management, with recent emphasis aimed at developing adult mosquito control methods. Here we investigated the persistence of the fungus Metarhizium anisopliae when tested against female A. aegypti under field conditions. Methods Black cotton cloths impregnated with M. anisopliae conidia, formulated in vegetable oil + isoparaffin, were maintained on a covered veranda for up to 30 days. At specific times, pieces of the cloths were removed, placed in Tween 80 and the resuspended conidia were sprayed directly onto mosquitoes. The persistence of conidia impregnated on black cloths using three different carriers was evaluated in test rooms. Fifty mosquitoes were released into each room and after a 5 day period, the surviving insects were captured. Another 50 insects were then released into each room. The capacity of the fungus at reducing mosquito survival was evaluated over a total of 35 days. Results Conidia extracted from cloths maintained on the veranda for 2 to 18 days remained virulent, with 28 to 60% mosquito survival observed. Mosquito survival following exposure to fungus impregnated cloths showed that fungus + Tween caused similar reductions to that of fungus + vegetable oil. Mosquitoes exposed to the formulation fungus + vegetable oil had survival rates of 36% over the first 5 days of the experiment. Following the release of the second cohort of mosquitoes (6-11days), survival increased to 50%. The survival of the 12–17 day cohort (78%) was statistically equal to that of the controls (84%). Formulation of the fungus in vegetable oil + isoparaffin increased the persistence of the fungus, with the 18–23 day cohort (64% survival) still showing statistical differences to that of the controls (87% survival). Conclusions The potential of entomopathogenic fungi for the control of adult A. aegypti was confirmed under field conditions. Vegetable oil + isoparaffin formulations of M. anisopliae significantly increased the effectiveness of the fungus, thus reducing the need for frequent changes of black cloths in residences. Our future aim is to obtain effective control of mosquito populations, with cloths only needing to being replaced once a month. PMID:24766705

Monitoring persistence of the entomopathogenic fungus Metarhizium anisopliae under simulated field conditions with the aim of controlling adult Aedes aegypti (Diptera: Culicidae).

PubMed

Carolino, Aline T; Paula, Adriano R; Silva, Carlos P; Butt, Tariq M; Samuels, Richard I

2014-04-25

Entomopathogenic fungi are potential candidates for use in integrated vector management, with recent emphasis aimed at developing adult mosquito control methods. Here we investigated the persistence of the fungus Metarhizium anisopliae when tested against female A. aegypti under field conditions. Black cotton cloths impregnated with M. anisopliae conidia, formulated in vegetable oil + isoparaffin, were maintained on a covered veranda for up to 30 days. At specific times, pieces of the cloths were removed, placed in Tween 80 and the resuspended conidia were sprayed directly onto mosquitoes. The persistence of conidia impregnated on black cloths using three different carriers was evaluated in test rooms. Fifty mosquitoes were released into each room and after a 5 day period, the surviving insects were captured. Another 50 insects were then released into each room. The capacity of the fungus at reducing mosquito survival was evaluated over a total of 35 days. Conidia extracted from cloths maintained on the veranda for 2 to 18 days remained virulent, with 28 to 60% mosquito survival observed. Mosquito survival following exposure to fungus impregnated cloths showed that fungus + Tween caused similar reductions to that of fungus + vegetable oil. Mosquitoes exposed to the formulation fungus + vegetable oil had survival rates of 36% over the first 5 days of the experiment. Following the release of the second cohort of mosquitoes (6-11days), survival increased to 50%. The survival of the 12-17 day cohort (78%) was statistically equal to that of the controls (84%). Formulation of the fungus in vegetable oil + isoparaffin increased the persistence of the fungus, with the 18-23 day cohort (64% survival) still showing statistical differences to that of the controls (87% survival). The potential of entomopathogenic fungi for the control of adult A. aegypti was confirmed under field conditions. Vegetable oil + isoparaffin formulations of M. anisopliae significantly increased the effectiveness of the fungus, thus reducing the need for frequent changes of black cloths in residences. Our future aim is to obtain effective control of mosquito populations, with cloths only needing to being replaced once a month.

Topology synthesis and size optimization of morphing wing structures

NASA Astrophysics Data System (ADS)

Inoyama, Daisaku

This research demonstrates a novel topology and size optimization methodology for synthesis of distributed actuation systems with specific applications to morphing air vehicle structures. The main emphasis is placed on the topology and size optimization problem formulations and the development of computational modeling concepts. The analysis model is developed to meet several important criteria: It must allow a rigid-body displacement, as well as a variation in planform area, with minimum strain on structural members while retaining acceptable numerical stability for finite element analysis. Topology optimization is performed on a semi-ground structure with design variables that control the system configuration. In effect, the optimization process assigns morphing members as "soft" elements, non-morphing load-bearing members as "stiff' elements, and non-existent members as "voids." The optimization process also determines the optimum actuator placement, where each actuator is represented computationally by equal and opposite nodal forces with soft axial stiffness. In addition, the configuration of attachments that connect the morphing structure to a non-morphing structure is determined simultaneously. Several different optimization problem formulations are investigated to understand their potential benefits in solution quality, as well as meaningfulness of the formulations. Extensions and enhancements to the initial concept and problem formulations are made to accommodate multiple-configuration definitions. In addition, the principal issues on the external-load dependency and the reversibility of a design, as well as the appropriate selection of a reference configuration, are addressed in the research. The methodology to control actuator distributions and concentrations is also discussed. Finally, the strategy to transfer the topology solution to the sizing optimization is developed and cross-sectional areas of existent structural members are optimized under applied aerodynamic loads. That is, the optimization process is implemented in sequential order: The actuation system layout is first determined through multi-disciplinary topology optimization process, and then the thickness or cross-sectional area of each existent member is optimized under given constraints and boundary conditions. Sample problems are solved to demonstrate the potential capabilities of the presented methodology. The research demonstrates an innovative structural design procedure from a computational perspective and opens new insights into the potential design requirements and characteristics of morphing structures.

Robust multiscale field-only formulation of electromagnetic scattering

NASA Astrophysics Data System (ADS)

Sun, Qiang; Klaseboer, Evert; Chan, Derek Y. C.

2017-01-01

We present a boundary integral formulation of electromagnetic scattering by homogeneous bodies that are characterized by linear constitutive equations in the frequency domain. By working with the Cartesian components of the electric E and magnetic H fields and with the scalar functions (r .E ) and (r .H ) where r is a position vector, the problem can be cast as having to solve a set of scalar Helmholtz equations for the field components that are coupled by the usual electromagnetic boundary conditions at material boundaries. This facilitates a direct solution for the surface values of E and H rather than having to work with surface currents or surface charge densities as intermediate quantities in existing methods. Consequently, our formulation is free of the well-known numerical instability that occurs in the zero-frequency or long-wavelength limit in traditional surface integral solutions of Maxwell's equations and our numerical results converge uniformly to the static results in the long-wavelength limit. Furthermore, we use a formulation of the scalar Helmholtz equation that is expressed as classically convergent integrals and does not require the evaluation of principal value integrals or any knowledge of the solid angle. Therefore, standard quadrature and higher order surface elements can readily be used to improve numerical precision for the same number of degrees of freedom. In addition, near and far field values can be calculated with equal precision, and multiscale problems in which the scatterers possess characteristic length scales that are both large and small relative to the wavelength can be easily accommodated. From this we obtain results for the scattering and transmission of electromagnetic waves at dielectric boundaries that are valid for any ratio of the local surface curvature to the wave number. This is a generalization of the familiar Fresnel formula and Snell's law, valid at planar dielectric boundaries, for the scattering and transmission of electromagnetic waves at surfaces of arbitrary curvature. Implementation details are illustrated with scattering by multiple perfect electric conductors as well as dielectric bodies with complex geometries and composition.

Dimensions of population policy in India: the psycho-social implications.

PubMed

Shariff, A; Mouli, A S

1978-01-01

All population policies, while seemingly identical in their formulation, differ in terms of their veritable ulterior objective. This is due to the fact that the formulation is done by a selected group of planning agencies and the health ministry. As the purport of the population policy rests more or less with the manipulation of the demographic variables, the important components of the population influencing policies should be discussed, as the population-influencing policies intend to impact on the population directly. The important components are fertility regulation, reductions in mortality and morbidity, and migration and population distribution. In India fertility regulations are directed toward achieving a reduced birth rate of 25 by 1984 or a growth rate of 1.25. While India has successfully reduced the mortality rate and the birth rate, the reduction in the rates are not proportional. This has led to a higher growth rate. Consequently, the pressure on the nation at this time is to reduce the birth rate. India has felt the strains of realizing this goal despite her concerted efforts for various reasons. First, birth control programs failed to gain as much acceptance as anticipated, whereas the plans designed to reduce mortality were moderately well received. Additionally, the birth control schemes came to have a cultural taboo, possibly attributable to inadequate and vague propaganda on the part of program administrators as well as illiteracy. Economic pro and con factors also contributed. The extent of migration in India is insignificant for various socioeconomic reasons. First, India is a country where illiteracy is predominant, and this has restrained the scope for migration. Secondly, as 80% of Indians depend on agriculture, they feel satisfied at home with whatever they earn. Regarding in-migration, India, as a developing country experiencing the ills of poverty, unemployment, low capital formation, and a slow pace of technological development, has not attracted in-migrants. India's efforts to delay the age at marriage either through law or persuasion have been futile as most of the young girls are neither in school nor gainfully employed. Laws governing inheritance should provide equal status for daughters whereby the preference to sons would undergo a change. Recently, India took a step in this direction by providing daughters with a share of their ancestral property, but this law gained little momentum in a society where daughters are deprived of any right over their ancestral or parental property. It appears that only a fraction of Indian women would welcome the provision of equal rights because nearly 80% of Indian women live in villages, which do not encourage a departure from the expected traditional role. When formulating population policy, attention should be given to its feasibility in the given social context.

Nonlinear rescaling of control values simplifies fuzzy control

NASA Technical Reports Server (NTRS)

Vanlangingham, H.; Tsoukkas, A.; Kreinovich, V.; Quintana, C.

1993-01-01

Traditional control theory is well-developed mainly for linear control situations. In non-linear cases there is no general method of generating a good control, so we have to rely on the ability of the experts (operators) to control them. If we want to automate their control, we must acquire their knowledge and translate it into a precise control strategy. The experts' knowledge is usually represented in non-numeric terms, namely, in terms of uncertain statements of the type 'if the obstacle is straight ahead, the distance to it is small, and the velocity of the car is medium, press the brakes hard'. Fuzzy control is a methodology that translates such statements into precise formulas for control. The necessary first step of this strategy consists of assigning membership functions to all the terms that the expert uses in his rules (in our sample phrase these words are 'small', 'medium', and 'hard'). The appropriate choice of a membership function can drastically improve the quality of a fuzzy control. In the simplest cases, we can take the functions whose domains have equally spaced endpoints. Because of that, many software packages for fuzzy control are based on this choice of membership functions. This choice is not very efficient in more complicated cases. Therefore, methods have been developed that use neural networks or generic algorithms to 'tune' membership functions. But this tuning takes lots of time (for example, several thousands iterations are typical for neural networks). In some cases there are evident physical reasons why equally space domains do not work: e.g., if the control variable u is always positive (i.e., if we control temperature in a reactor), then negative values (that are generated by equal spacing) simply make no sense. In this case it sounds reasonable to choose another scale u' = f(u) to represent u, so that equal spacing will work fine for u'. In the present paper we formulate the problem of finding the best rescaling function, solve this problem, and show (on a real-life example) that after an optimal rescaling, the un-tuned fuzzy control can be as good as the best state-of-art traditional non-linear controls.

Microscopic description of exciton polaritons in direct two-band semiconductors

NASA Astrophysics Data System (ADS)

Nguyen, Van Trong; Mahler, Günter

1999-07-01

Based on a quantum electrodynamical formulation, a microscopic description of exciton polaritons in a two-band semiconductor is presented. We show that the interband exchange Coulomb interaction, responsible for the coupling of the exciton with the longitudinal part of the induced field, should be treated on equal footing together with the coupling to the transverse part of the induced field (the photon field). The constitutive relation is established to connect the current density with the total electric field of polaritons. The classical Maxwell equations are derived from the quantum representation of photons to get a closed system of equations. The temporal evolution for an initial excited exciton state is studied in detail and an anisotropic polariton vacuum Rabi splitting is shown to occur. A number of up-to-now unresolved discrepancies in the literature are clarified.

Pan masala plus tobacco is equal to Gutka square--new formulation of tobacco in India after the Gutka ban.

PubMed

Shetty, Pushparaja

2014-01-01

Tobacco is a well known cause of death worldwide. With existing comprehensive laws and various other measures for tobacco control, the mortality and morbidity due to tobacco usage have unfortunately not been reduced. A large number of tobacco users have altered their pattern of tobacco use after the gutka ban. Traditional gutka is sold in the open market in a pre-mixed format. Manufacturers are supplying pan masala and tobacco in separate pouches as there is no restriction for sale of pan masala and tobacco individually in many states. Although most of the population is aware of the health hazards of tobacco, it is necessary to develop an effective structured strategy. Tobacco control programs need to be strengthened by separate tobacco control measures at various levels.

Adaptive filtering with the self-organizing map: a performance comparison.

PubMed

Barreto, Guilherme A; Souza, Luís Gustavo M

2006-01-01

In this paper we provide an in-depth evaluation of the SOM as a feasible tool for nonlinear adaptive filtering. A comprehensive survey of existing SOM-based and related architectures for learning input-output mappings is carried out and the application of these architectures to nonlinear adaptive filtering is formulated. Then, we introduce two simple procedures for building RBF-based nonlinear filters using the Vector-Quantized Temporal Associative Memory (VQTAM), a recently proposed method for learning dynamical input-output mappings using the SOM. The aforementioned SOM-based adaptive filters are compared with standard FIR/LMS and FIR/LMS-Newton linear transversal filters, as well as with powerful MLP-based filters in nonlinear channel equalization and inverse modeling tasks. The obtained results in both tasks indicate that SOM-based filters can consistently outperform powerful MLP-based ones.

Parametric study of electromagnetic waves propagating in absorbing curved S ducts

NASA Technical Reports Server (NTRS)

Baumeister, Kenneth J.

1989-01-01

A finite-element Galerkin formulation has been developed to study attenuation of transverse magnetic (TM) waves propagating in two-dimensional S-curved ducts with absorbing walls. In the frequency range where the duct diameter and electromagnetic wave length are nearly equal, the effect of duct length, curvature (duct offset), and absorber wall thickness was examined. For a given offset in the curved duct, the length of the S-duct was found to significantly affect both the absorptive and reflective characteristics of the duct. For a straight and a curved duct with perfect electric conductor terminations, power attenuation contours were examined to determine electromagnetic wall properties associated with maximum input signal absorption. Offset of the S-duct was found to significantly affect the value of the wall permittivity associated with the optimal attenuation of the incident electromagnetic wave.

Lagrangian formulation and symmetrical description of liquid dynamics.

PubMed

Trachenko, K

2017-12-01

Theoretical description of liquids has been primarily based on the hydrodynamic approach and its generalization to the solid-like regime. We show that the same liquid properties can be derived starting from solid-like equations and generalizing them to account for the hydrodynamic flow. Both approaches predict propagating shear waves with the notable gap in k-space. This gives an important symmetry of liquids regarding their description. We subsequently construct a two-field Lagrangian of liquid dynamics where the dissipative hydrodynamic and solid-like terms are treated on equal footing. The Lagrangian predicts two gapped waves propagating in opposite space-time directions. The dissipative and mass terms compete by promoting gaps in k-space and energy, respectively. When bare mass is close to the field hopping frequency, both gaps close and the dissipative term annihilates the bare mass.

[The role of the comprehensive approach for the characteristic of the destructive effect of a non-lethal cartridge with two rubber bullets].

PubMed

Stragis, V B; Makarov, I Yu; Karelin, V V; Shevchuk, D Yu; Chechenin, E S

This article was designed to report the results of forensic medical, criminalistics, and comprehensive expertise of the subject who suffered from a non-perforating shotgun wound affecting the soft tissues and blood vessels in the femoral region. It was shown that only the scrutinous comprehensive full-scale expert examination of the injured site in the framework of forensic medical expertise makes it possible to exclude the probability of the expert error and formulate the reliable and substantiated conclusion as regards the fact and the conditions of the shotgun injury by a concrete type of the cartridge (e.g. having a caliber equal to 410/76 Stopper-2) with two spherical rubber bullets fired from a known weapon (Saiga-410S hunting carbine).

A finite element formulation for supersonic flows around complex configurations

NASA Technical Reports Server (NTRS)

Morino, L.

1974-01-01

The problem of small perturbation potential supersonic flow around complex configurations is considered. This problem requires the solution of an integral equation relating the values of the potential on the surface of the body to the values of the normal derivative, which is known from the small perturbation boundary conditions. The surface of the body is divided into small (hyperboloidal quadrilateral) surface elements which are described in terms of the Cartesian components of the four corner points. The values of the potential (and its normal derivative) within each element are assumed to be constant and equal to its value at the centroid of the element. This yields a set of linear algebraic equations whose coefficients are given by source and doublet integrals over the surface elements. Closed form evaluations of the integrals are presented.

Study of the similarity function in Indexing-First-One hashing

NASA Astrophysics Data System (ADS)

Lai, Y.-L.; Jin, Z.; Goi, B.-M.; Chai, T.-Y.

2017-06-01

The recent proposed Indexing-First-One (IFO) hashing is a latest technique that is particularly adopted for eye iris template protection, i.e. IrisCode. However, IFO employs the measure of Jaccard Similarity (JS) initiated from Min-hashing has yet been adequately discussed. In this paper, we explore the nature of JS in binary domain and further propose a mathematical formulation to generalize the usage of JS, which is subsequently verified by using CASIA v3-Interval iris database. Our study reveals that JS applied in IFO hashing is a generalized version in measure two input objects with respect to Min-Hashing where the coefficient of JS is equal to one. With this understanding, IFO hashing can propagate the useful properties of Min-hashing, i.e. similarity preservation, thus favorable for similarity searching or recognition in binary space.

Developments in new aircraft tire tread materials. [fatigue life of elastomeric materials

NASA Technical Reports Server (NTRS)

Yager, T. J.; Mccarty, J. L.; Riccitiello, S. R.; Golub, M. A.

1976-01-01

Comparative laboratory and field tests were conducted on experimental and state-of-the-art aircraft tire tread materials in a program aimed at seeking new elastomeric materials which would provide improved aircraft tire tread wear, traction, and blowout resistance in the interests of operational safety and economy. The experimental stock was formulated of natural rubber and amorphous vinyl polybutadiene to provide high thermal-oxidative resistance, a characteristic pursued on the premise that thermal oxidation is involved both in the normal abrasion or wear of tire treads and probably in the chain of events leading to blowout failures. Results from the tests demonstrate that the experimental stock provided better heat buildup (hysteresis) and fatigue properties, at least equal wet and dry traction, and greater wear resistance than the state-of-the-art stock.

Black-on-white polymer-stabilized cholesteric formulations

NASA Astrophysics Data System (ADS)

West, John L.; Magyar, Gregory R.; Francl, James J.; Nixon, Christine M.

1995-08-01

Recent research by Doane, Yang, and Chien demonstrated the use of cholesteric liquid crystals in multiplexed, high resolution, reflective diplays. These materials utilize the bistability of the cholesteric planar and focal conic states for displays with a colored image on a black background. Many commercial applications of these materials, such as electronic books and newspapers, portable faxes and personal data assistants, require, or at least prefer, black-on- white images. We report on relatively high polymer content (equalsV 20% by weight) dispersions of cholesteric liquid crystals that produce a white, reflecting, planar state. The polymer network appears to form cholesteric domains with varying pitch lengths resulting in planar states that reflect in the red, green, and blue portions of the spectrum. Utilizing a black absorbing layer behind a display using these materials offers white images on a black background, or vice-versa.

Transport coefficients in ultrarelativistic kinetic theory

NASA Astrophysics Data System (ADS)

Ambruş, Victor E.

2018-02-01

A spatially periodic longitudinal wave is considered in relativistic dissipative hydrodynamics. At sufficiently small wave amplitudes, an analytic solution is obtained in the linearized limit of the macroscopic conservation equations within the first- and second-order relativistic hydrodynamics formulations. A kinetic solver is used to obtain the numerical solution of the relativistic Boltzmann equation for massless particles in the Anderson-Witting approximation for the collision term. It is found that, at small values of the Anderson-Witting relaxation time τ , the transport coefficients emerging from the relativistic Boltzmann equation agree with those predicted through the Chapman-Enskog procedure, while the relaxation times of the heat flux and shear pressure are equal to τ . These claims are further strengthened by considering a moment-type approximation based on orthogonal polynomials under which the Chapman-Enskog results for the transport coefficients are exactly recovered.

Bayesian Optimization Under Mixed Constraints with A Slack-Variable Augmented Lagrangian

DOE Office of Scientific and Technical Information (OSTI.GOV)

Picheny, Victor; Gramacy, Robert B.; Wild, Stefan M.

An augmented Lagrangian (AL) can convert a constrained optimization problem into a sequence of simpler (e.g., unconstrained) problems, which are then usually solved with local solvers. Recently, surrogate-based Bayesian optimization (BO) sub-solvers have been successfully deployed in the AL framework for a more global search in the presence of inequality constraints; however, a drawback was that expected improvement (EI) evaluations relied on Monte Carlo. Here we introduce an alternative slack variable AL, and show that in this formulation the EI may be evaluated with library routines. The slack variables furthermore facilitate equality as well as inequality constraints, and mixtures thereof.more » We show our new slack “ALBO” compares favorably to the original. Its superiority over conventional alternatives is reinforced on several mixed constraint examples.« less

The androgen-deficient aging male: current treatment options.

PubMed

Tenover, J Lisa

2003-01-01

All delivery forms of testosterone should be equally efficacious in treating the androgen-deficient aging male if adequate serum testosterone levels are obtained. The testosterone preparations available in North America include the oral undecanoate, injectable testosterone esters, the scrotal patch, the nonscrotal transdermal patch, and the transdermal gels. Selection of a specific testosterone preparation for replacement therapy depends on many factors, including the magnitude and pattern of serum testosterone levels produced, side effects of the particular formulation, reversibility if an adverse event should occur, convenience of use, cosmetic issues related to the preparation, and cost. In addition, potential adverse effects of testosterone therapy applicable to all forms of testosterone delivery, such as fluid retention, gynecomastia, polycythemia, worsening of sleep apnea, change in cardiovascular-disease risk, or alterations in prostate health, need to be considered both prior to therapy and during treatment monitoring.

Novel properties of the q-analogue quantized radiation field

NASA Technical Reports Server (NTRS)

Nelson, Charles A.

1993-01-01

The 'classical limit' of the q-analog quantized radiation field is studied paralleling conventional quantum optics analyses. The q-generalizations of the phase operator of Susskind and Glogower and that of Pegg and Barnett are constructed. Both generalizations and their associated number-phase uncertainty relations are manifestly q-independent in the n greater than g number basis. However, in the q-coherent state z greater than q basis, the variance of the generic electric field, (delta(E))(sup 2) is found to be increased by a factor lambda(z) where lambda(z) greater than 1 if q not equal to 1. At large amplitudes, the amplitude itself would be quantized if the available resolution of unity for the q-analog coherent states is accepted in the formulation. These consequences are remarkable versus the conventional q = 1 limit.

Effective and basic business strategic tools to overcome the DRA impact in outpatient imaging centers.

PubMed

Cerdena, Ernesto A; Corigliano, Barbara A

2007-01-01

The implementation of the Deficit Reduction Act (DRA) of 2005 has had adverse impacts with freestanding imaging centers and independent diagnostic testing facilities (IDTF) throughout the nation, including patient's access to quality imaging as well as crippling an organization's bottom line. Basic but effective business strategic tools should be formulated and executed to overcome the negative impact of the DRA. This should include creative and innovative process improvement initiatives while reducing operational costs and optimizing staff, thus improving profitability. Radiology administrators should act as facilitators to articulate and instill the mission, core values, and vision of the organization to the staff. Equally important, leaders in the imaging industry need to manifest a strong commitment in bringing the center into a whole new paradigm shift towards excellence and effective business operations.

Lagrangian formulation and symmetrical description of liquid dynamics

NASA Astrophysics Data System (ADS)

Trachenko, K.

2017-12-01

Theoretical description of liquids has been primarily based on the hydrodynamic approach and its generalization to the solid-like regime. We show that the same liquid properties can be derived starting from solid-like equations and generalizing them to account for the hydrodynamic flow. Both approaches predict propagating shear waves with the notable gap in k -space. This gives an important symmetry of liquids regarding their description. We subsequently construct a two-field Lagrangian of liquid dynamics where the dissipative hydrodynamic and solid-like terms are treated on equal footing. The Lagrangian predicts two gapped waves propagating in opposite space-time directions. The dissipative and mass terms compete by promoting gaps in k -space and energy, respectively. When bare mass is close to the field hopping frequency, both gaps close and the dissipative term annihilates the bare mass.

Edemagenic gain and interstitial fluid volume regulation.

PubMed

Dongaonkar, R M; Quick, C M; Stewart, R H; Drake, R E; Cox, C S; Laine, G A

2008-02-01

Under physiological conditions, interstitial fluid volume is tightly regulated by balancing microvascular filtration and lymphatic return to the central venous circulation. Even though microvascular filtration and lymphatic return are governed by conservation of mass, their interaction can result in exceedingly complex behavior. Without making simplifying assumptions, investigators must solve the fluid balance equations numerically, which limits the generality of the results. We thus made critical simplifying assumptions to develop a simple solution to the standard fluid balance equations that is expressed as an algebraic formula. Using a classical approach to describe systems with negative feedback, we formulated our solution as a "gain" relating the change in interstitial fluid volume to a change in effective microvascular driving pressure. The resulting "edemagenic gain" is a function of microvascular filtration coefficient (K(f)), effective lymphatic resistance (R(L)), and interstitial compliance (C). This formulation suggests two types of gain: "multivariate" dependent on C, R(L), and K(f), and "compliance-dominated" approximately equal to C. The latter forms a basis of a novel method to estimate C without measuring interstitial fluid pressure. Data from ovine experiments illustrate how edemagenic gain is altered with pulmonary edema induced by venous hypertension, histamine, and endotoxin. Reformulation of the classical equations governing fluid balance in terms of edemagenic gain thus yields new insight into the factors affecting an organ's susceptibility to edema.

Universal rule for the symmetric division of plant cells

PubMed Central

Besson, Sébastien; Dumais, Jacques

2011-01-01

The division of eukaryotic cells involves the assembly of complex cytoskeletal structures to exert the forces required for chromosome segregation and cytokinesis. In plants, empirical evidence suggests that tensional forces within the cytoskeleton cause cells to divide along the plane that minimizes the surface area of the cell plate (Errera’s rule) while creating daughter cells of equal size. However, exceptions to Errera’s rule cast doubt on whether a broadly applicable rule can be formulated for plant cell division. Here, we show that the selection of the plane of division involves a competition between alternative configurations whose geometries represent local area minima. We find that the probability of observing a particular division configuration increases inversely with its relative area according to an exponential probability distribution known as the Gibbs measure. Moreover, a comparison across land plants and their most recent algal ancestors confirms that the probability distribution is widely conserved and independent of cell shape and size. Using a maximum entropy formulation, we show that this empirical division rule is predicted by the dynamics of the tense cytoskeletal elements that lead to the positioning of the preprophase band. Based on the fact that the division plane is selected from the sole interaction of the cytoskeleton with cell shape, we posit that the new rule represents the default mechanism for plant cell division when internal or external cues are absent. PMID:21383128

Relations between nonlinear Riccati equations and other equations in fundamental physics

NASA Astrophysics Data System (ADS)

Schuch, Dieter

2014-10-01

Many phenomena in the observable macroscopic world obey nonlinear evolution equations while the microscopic world is governed by quantum mechanics, a fundamental theory that is supposedly linear. In order to combine these two worlds in a common formalism, at least one of them must sacrifice one of its dogmas. Linearizing nonlinear dynamics would destroy the fundamental property of this theory, however, it can be shown that quantum mechanics can be reformulated in terms of nonlinear Riccati equations. In a first step, it will be shown that the information about the dynamics of quantum systems with analytical solutions can not only be obtainable from the time-dependent Schrödinger equation but equally-well from a complex Riccati equation. Comparison with supersymmetric quantum mechanics shows that even additional information can be obtained from the nonlinear formulation. Furthermore, the time-independent Schrödinger equation can also be rewritten as a complex Riccati equation for any potential. Extension of the Riccati formulation to include irreversible dissipative effects is straightforward. Via (real and complex) Riccati equations, other fields of physics can also be treated within the same formalism, e.g., statistical thermodynamics, nonlinear dynamical systems like those obeying a logistic equation as well as wave equations in classical optics, Bose- Einstein condensates and cosmological models. Finally, the link to abstract "quantizations" such as the Pythagorean triples and Riccati equations connected with trigonometric and hyperbolic functions will be shown.

A Novel Approach for Adaptive Signal Processing

NASA Technical Reports Server (NTRS)

Chen, Ya-Chin; Juang, Jer-Nan

1998-01-01

Adaptive linear predictors have been used extensively in practice in a wide variety of forms. In the main, their theoretical development is based upon the assumption of stationarity of the signals involved, particularly with respect to the second order statistics. On this basis, the well-known normal equations can be formulated. If high- order statistical stationarity is assumed, then the equivalent normal equations involve high-order signal moments. In either case, the cross moments (second or higher) are needed. This renders the adaptive prediction procedure non-blind. A novel procedure for blind adaptive prediction has been proposed and considerable implementation has been made in our contributions in the past year. The approach is based upon a suitable interpretation of blind equalization methods that satisfy the constant modulus property and offers significant deviations from the standard prediction methods. These blind adaptive algorithms are derived by formulating Lagrange equivalents from mechanisms of constrained optimization. In this report, other new update algorithms are derived from the fundamental concepts of advanced system identification to carry out the proposed blind adaptive prediction. The results of the work can be extended to a number of control-related problems, such as disturbance identification. The basic principles are outlined in this report and differences from other existing methods are discussed. The applications implemented are speech processing, such as coding and synthesis. Simulations are included to verify the novel modelling method.

Investigation of advanced counterrotation blade configuration concepts for high speed turboprop systems, task 1: Ducted propfan analysis

NASA Technical Reports Server (NTRS)

Hall, Edward J.; Delaney, Robert A.; Bettner, James L.

1990-01-01

The time-dependent three-dimensional Euler equations of gas dynamics were solved numerically to study the steady compressible transonic flow about ducted propfan propulsion systems. Aerodynamic calculations were based on a four-stage Runge-Kutta time-marching finite volume solution technique with added numerical dissipation. An implicit residual smoothing operator was used to aid convergence. Two calculation grids were employed in this study. The first grid utilized an H-type mesh network with a branch cut opening to represent the axisymmetric cowl. The second grid utilized a multiple-block mesh system with a C-type grid about the cowl. The individual blocks were numerically coupled in the Euler solver. Grid systems were generated by a combined algebraic/elliptic algortihm developed specifically for ducted propfans. Numerical calculations were initially performed for unducted propfans to verify the accuracy of the three-dimensional Euler formulation. The Euler analyses were then applied for the calculation of ducted propfan flows, and predicted results were compared with experimental data for two cases. The three-dimensional Euler analyses displayed exceptional accuracy, although certain parameters were observed to be very sensitive to geometric deflections. Both solution schemes were found to be very robust and demonstrated nearly equal efficiency and accuracy, although it was observed that the multi-block C-grid formulation provided somewhat better resolution of the cowl leading edge region.

Atmospheric inverse modeling via sparse reconstruction

NASA Astrophysics Data System (ADS)

Hase, Nils; Miller, Scot M.; Maaß, Peter; Notholt, Justus; Palm, Mathias; Warneke, Thorsten

2017-10-01

Many applications in atmospheric science involve ill-posed inverse problems. A crucial component of many inverse problems is the proper formulation of a priori knowledge about the unknown parameters. In most cases, this knowledge is expressed as a Gaussian prior. This formulation often performs well at capturing smoothed, large-scale processes but is often ill equipped to capture localized structures like large point sources or localized hot spots. Over the last decade, scientists from a diverse array of applied mathematics and engineering fields have developed sparse reconstruction techniques to identify localized structures. In this study, we present a new regularization approach for ill-posed inverse problems in atmospheric science. It is based on Tikhonov regularization with sparsity constraint and allows bounds on the parameters. We enforce sparsity using a dictionary representation system. We analyze its performance in an atmospheric inverse modeling scenario by estimating anthropogenic US methane (CH4) emissions from simulated atmospheric measurements. Different measures indicate that our sparse reconstruction approach is better able to capture large point sources or localized hot spots than other methods commonly used in atmospheric inversions. It captures the overall signal equally well but adds details on the grid scale. This feature can be of value for any inverse problem with point or spatially discrete sources. We show an example for source estimation of synthetic methane emissions from the Barnett shale formation.

Displacement and dissipation under the rotating tidal potential, in contrast to Love's geostationary potential

NASA Astrophysics Data System (ADS)

Bostrom, R. C.

The Earth rotates relative to the solunar gravity field. In consequence the M2, S2 tides are represented by permanent bulges, travelling westward around the Earth as distortion waves. The associated tidal stress ellipsoid progresses perpetually by rotation, without reversal. It is shown that under imperfect elasticity, in lieu of the body forces induced by Love's geostationary time-variant potential a rotating potential induces internal body couples, equally pervasive. Displacement is cumulative, and in the vortical mode formulated by Helmholtz (1858). Whereas in the geostationary formulation of Love cumulative distortion is nil, in actuality this motion is primary, and dimensionally capable of coupling with extant mantle convection. Unlike the marine tides, the bodily wave-tides proceed unhindered around the Earth unhindered by continental margins. Corrected for oceanic effects the complex Love numbers measure dissipation, as commonly supposed. However dissipation is the result of unmapped cumulative vortical displacement (a circulation component), rather than oscillatory forces having the form of a geographically stationary spheroidal eigenvibration. The characteristic period of the loss factor 1/Q is infinity rather than the period pertinent to seismicity or wobble, to which it is dimensionally unrelated. Although primary vorticity-induction is required by the existence of the rotating tidal potential, its tectonic consequences are a matter of speculation, treated elsewhere [1]. --- [1] Bostrom, R.C., 1998. Tectonic Consequences of the Earth's Rotation. Oxfo rd University Press.

Feasibility and application of a retronasal aroma-trapping device to study in vivo aroma release during the consumption of model wine-derived beverages

PubMed Central

Muñoz-González, Carolina; Rodríguez-Bencomo, Juan José; Moreno-Arribas, Maria Victoria; Pozo-Bayón, Maria Ángeles

2014-01-01

New types of wine-derived beverages are now in the market. However, little is known about the impact of ingredient formulation on aroma release during consumption, which is directly linked to consumer preferences and liking. In this study, the optimization and validation of a retronasal aroma-trapping device (RATD) for the in vivo monitoring of aroma release was carried out. This device was applied to assess the impact of two main ingredients (sugar and ethanol) in these types of beverages on in vivo aroma release. Two aroma-trapping materials (Lichrolut and Tenax) were firstly assayed. Tenax provided higher recovery and lower intra- and inter-trap variability. In in vivo conditions, RATD provided an adequate linear range (R2 > 0.91) between 0 and 50 mg L−1 of aroma compounds. Differences in the total aroma release were observed in equally trained panelists. It was proven that the addition of sugar (up to 150 mg kg−1) did not have effect on aroma release, while ethanol (up to 40 mg L−1) enhanced the aroma release during drinking. The RATD is a useful tool to collect real in vivo data to extract reliable conclusions about the effect of beverage components on aroma release during consumption. The concentration of ethanol should be taken into consideration for the formulation of wine-derived beverages. PMID:25473493

The equations of motion for moist atmospheric air

NASA Astrophysics Data System (ADS)

Makarieva, Anastassia M.; Gorshkov, Victor G.; Nefiodov, Andrei V.; Sheil, Douglas; Nobre, Antonio Donato; Bunyard, Peter; Nobre, Paulo; Li, Bai-Lian

2017-07-01

How phase transitions affect the motion of moist atmospheric air remains controversial. In the early 2000s two distinct differential equations of motion were proposed. Besides their contrasting formulations for the acceleration of condensate, the equations differ concerning the presence/absence of a term equal to the rate of phase transitions multiplied by the difference in velocity between condensate and air. This term was interpreted in the literature as the "reactive motion" associated with condensation. The reasoning behind this reactive motion was that when water vapor condenses and droplets begin to fall the remaining gas must move upward to conserve momentum. Here we show that the two contrasting formulations imply distinct assumptions about how gaseous air and condensate particles interact. We show that these assumptions cannot be simultaneously applicable to condensation and evaporation. Reactive motion leading to an upward acceleration of air during condensation does not exist. The reactive motion term can be justified for evaporation only; it describes the downward acceleration of air. We emphasize the difference between the equations of motion (i.e., equations constraining velocity) and those constraining momentum (i.e., equations of motion and continuity combined). We show that owing to the imprecise nature of the continuity equations, consideration of total momentum can be misleading and that this led to the reactive motion controversy. Finally, we provide a revised and generally applicable equation for the motion of moist air.

Inverse Electrocardiographic Source Localization of Ischemia: An Optimization Framework and Finite Element Solution

PubMed Central

Wang, Dafang; Kirby, Robert M.; MacLeod, Rob S.; Johnson, Chris R.

2013-01-01

With the goal of non-invasively localizing cardiac ischemic disease using body-surface potential recordings, we attempted to reconstruct the transmembrane potential (TMP) throughout the myocardium with the bidomain heart model. The task is an inverse source problem governed by partial differential equations (PDE). Our main contribution is solving the inverse problem within a PDE-constrained optimization framework that enables various physically-based constraints in both equality and inequality forms. We formulated the optimality conditions rigorously in the continuum before deriving finite element discretization, thereby making the optimization independent of discretization choice. Such a formulation was derived for the L2-norm Tikhonov regularization and the total variation minimization. The subsequent numerical optimization was fulfilled by a primal-dual interior-point method tailored to our problem’s specific structure. Our simulations used realistic, fiber-included heart models consisting of up to 18,000 nodes, much finer than any inverse models previously reported. With synthetic ischemia data we localized ischemic regions with roughly a 10% false-negative rate or a 20% false-positive rate under conditions up to 5% input noise. With ischemia data measured from animal experiments, we reconstructed TMPs with roughly 0.9 correlation with the ground truth. While precisely estimating the TMP in general cases remains an open problem, our study shows the feasibility of reconstructing TMP during the ST interval as a means of ischemia localization. PMID:23913980

Efficacy and Safety Profile of Diclofenac/Cyclodextrin and Progesterone/Cyclodextrin Formulations: A Review of the Literature Data.

PubMed

Scavone, Cristina; Bonagura, Angela Colomba; Fiorentino, Sonia; Cimmaruta, Daniela; Cenami, Rosina; Torella, Marco; Fossati, Tiziano; Rossi, Francesco

2016-06-01

According to health technology assessment, patients deserve the best medicine. The development of drugs associated with solubility enhancers, such as cyclodextrins, represents a measure taken in order to improve the management of patients. Different drugs, such as estradiol, testosterone, dexamethasone, opioids, non-steroidal anti-inflammatories (NSAIDs; i.e. diclofenac), and progesterone are associated with cyclodextrins. Products containing the association of diclofenac/cyclodextrins are available for subcutaneous, intramuscular, and intravenous administration in doses that range from 25 to 75 mg. Medicinal products containing the association of progesterone/cyclodextrins are indicated for intramuscular and subcutaneous injection at a dose equal to 25 mg. The effects of cyclodextrins have been discussed in the solubility profile and permeability through biological membranes of drug molecules. A literature search was performed in order to give an overview of the pharmacokinetic characteristics, and efficacy and safety profiles of diclofenac/hydroxypropyl-β-cyclodextrin (HPβCD) and progesterone/HPβCD associations. The results of more than 20 clinical studies were reviewed. It was suggested that the new diclofenac/HPβCD formulation gives a rapid and effective response to acute pain and, furthermore, has pharmacokinetic and efficacy/safety profiles comparable to other medicinal products not containing cyclodextrins. One of the principal aspects of these new diclofenac formulations is that in lowering the dose (lower than 50 mg) the drugs could be more tolerable, especially in patients with comorbid conditions. Moreover, results of studies investigating the characteristics of progesterone and cyclodextrins showed that the new formulation (progesterone/HPβCD 25 mg solution) has the same bioavailability as other products containing progesterone. It is more rapidly absorbed and allows the achievement of peak plasma concentrations in a shorter time. Finally, the new formulation of progesterone was shown to be safe and not inferior to other products already on the market, with the exception of progesterone administered vaginally. As shown by the results of clinical studies presented in this review, the newly approved medicines containing cyclodextrins have been found to be as effective and as well-tolerated as other medicinal products that do not contain cyclodextrins. Moreover, the newly approved lower dose of diclofenac associated with cyclodextrins is consistent with the European Medicines Agency recommendations reported in the revision of the Assessment Report for Non-Steroidal Anti-Inflammatory Drugs (NSAIDs) and Cardiovascular Risk. Finally, the use of cyclodextrins led to significant increases in solubility and bioavailability of drugs, such as diclofenac and progesterone, and improvement in the efficacy and safety of these drugs.

Raising Questions About Capitalist Globalization and Universalizing Views on Women: A Transnational Feminist Critique of the World Development Report: Gender Equality and Development.

PubMed

Scheer, Victoria L; Stevens, Patricia E; Mkandawire-Valhmu, Lucy

2016-01-01

Nursing in the United States has embraced global health primarily from a clinical perspective, with emphasis on care delivery to populations in underserved, resource-poor settings. Less attention has been devoted to developing expertise about social, economic, and political contexts that produce ill health around the world. The purpose of this article is to offer a transnational feminist critique of the World Development Report: Gender Equality and Development and to illuminate implications such reports may have in the lives of the world's most marginalized women and girls. We examine the political economy idealized in the report, raising questions about the capitalist framework underpinning its agenda. Second, we examine the assumptive language used in the report, suggesting that it discursively constructs a problematic representation of women in low-income countries. We contend that the report perpetuates a hegemonic discourse of patriarchy and inequality for women in the Global South through the use of an uncontested economic framework and universalist reasoning. We conclude the article with discussion about a transformative policy making that could be more inclusive of the wisdoms, values, and everyday experiences of women living in the Global South and about the vital role nurses can play in advancing gender equity through their active collaboration in policy critique and policy formulation.

Robot-assisted laparoscopic skills development: formal versus informal training.

PubMed

Benson, Aaron D; Kramer, Brandan A; Boehler, Margaret; Schwind, Cathy J; Schwartz, Bradley F

2010-08-01

The learning curve for robotic surgery is not completely defined, and ideal training components have not yet been identified. We attempted to determine whether skill development would be accelerated with formal, organized instruction in robotic surgical techniques versus informal practice alone. Forty-three medical students naive to robotic surgery were randomized into two groups and tested on three tasks using the robotic platform. Between the testing sessions, the students were given equally timed practice sessions. The formal training group participated in an organized, formal training session with instruction from an attending robotic surgeon, whereas the informal training group participated in an equally timed unstructured practice session with the robot. The results were compared based on technical score and time to completion of each task. There was no difference between groups in prepractice testing for any task. In postpractice testing, there was no difference between groups for the ring transfer tasks. However, for the suture placement and knot-tying task, the technical score of the formal training group was significantly better than that of the informal training group (p < 0.001), yet time to completion was not different. Although formal training may not be necessary for basic skills, formal instruction for more advanced skills, such as suture placement and knot tying, is important in developing skills needed for effective robotic surgery. These findings may be important in formulating potential skills labs or training courses for robotic surgery.

Reexamination of strong subadditivity: A quantum-correlation approach

NASA Astrophysics Data System (ADS)

Taghiabadi, Razieh; Akhtarshenas, Seyed Javad; Sarbishaei, Mohsen

2017-03-01

The strong subadditivity inequality of von Neumann entropy relates the entropy of subsystems of a tripartite state ρA B C to that of the composite system. Here, we define T(a )(ρA B C) as the extent to which ρA B C fails to satisfy the strong subadditivity inequality S (ρB) +S (ρC) ≤S (ρA B) +S (ρA C) with equality and investigate its properties. In particular, by introducing auxiliary subsystem E , we consider any purification | ψA B C E> of ρA B C and formulate T(a )(ρA B C) as the extent to which the bipartite quantum correlations of ρA B and ρA C, measured by entanglement of formation and quantum discord, change under the transformation B →B E and C →C E . Invariance of quantum correlations of ρA B and ρA C under such transformation is shown to be a necessary and sufficient condition for vanishing T(a )(ρA B C) . Our approach allows one to characterize, intuitively, the structure of states for which the strong subadditivity is saturated. Moreover, along with providing a conservation law for quantum correlations of states for which the strong subadditivity inequality is satisfied with equality, we find that such states coincide with those that the Koashi-Winter monogamy relation is saturated.

Investigation of nano lipid vesicles of methotrexate for anti-rheumatoid activity

PubMed Central

Prabhu, Prabhakara; Shetty, Rakshith; Koland, Marina; Vijayanarayana, K; Vijayalakshmi, KK; Nairy, M Harish; Nisha, GS

2012-01-01

Background The purpose of this study was to formulate and evaluate nano lipid vesicles of methotrexate (MTX) for its anti-rheumatoid activity. Methods In this study the principle of both active as well as passive targeting using MTX-loaded stealth liposomes as per the magic gun approach was followed. Stealth liposomes of MTX were prepared by thin-film hydration method using a PEGylated phospholipid-like DSPE-MPEG 2000. Similarly, conventional liposomes were prepared using phospholipids like DPPC and DSPC. Conventional liposomes were coated with a hydrophilic biocompatible polymer like chitosan. They were investigated for their physical properties and in vitro release profile. Further, in vivo screening of the formulations for their anti-rheumatoid efficacy was carried out in rats. Rheumatoid arthritis was induced in male Wistar-Lewis rats using complete Freund’s adjuvant (1 mg/mL Mycobacterium tuberculosis, heat killed in mineral oil). Results It was found that chitosan coating of the conventional liposomes increased the physical stability of the liposomal suspension as well as its entrapment efficiency. The size of the unsonicated lipid vesicles was found to be in the range of 8–10 μm, and the sonicated lipid vesicles in the range of 210–260 nm, with good polydispersity index. Further, chitosan-coated conventional liposomes and the PEGylated liposomes released the drug for a prolonged period of time, compared to the uncoated conventional liposomes. It was found that there was a significant reduction in edema volume in the rat group administered with the test stealth liposomal formulations and chitosan-coated conventional liposomes (PEGylated and chitosan-coated conventional) compared to that of the control and standard (administered with free MTX) group of rats. PEGylated liposomes showed almost equal efficacy as that of the chitosan-coated conventional liposomes. Conclusion Lipid nano vesicles of MTX can be administered by intravenous route, whereby the drug selectively reaches the target site with reduced toxicity to other organs. PMID:22275833

Calcium is a key constituent for maintaining the in vitro properties of platelets suspended in the bicarbonate-containing additive solution M-sol with low plasma levels.

PubMed

Wagner, Stephen J; Skripchenko, Andrey; Myrup, Andrew; Thompson-Montgomery, Dedeene; Awatefe, Helen; Moroff, Gary

2010-05-01

Commercially available additive solutions (ASs) require 30% to 35% plasma for optimal storage of platelets (PLTs). PLTs suspended in M-sol, a bicarbonate-based experimental platelet additive solution (PAS), maintain in vitro PLT properties during storage with low levels of plasma (< or =5%). Four different formulations of M-sol were prepared at the optimal pH (6.1): M-sol, M-sol without calcium, M-sol without citric acid, and M-sol without calcium and citric acid. Apheresis PLT units (100% plasma) were equally divided into five 50-mL aliquots in PL732 containers, centrifuged, and resuspended to prepare units suspended in the four different PASs (95%) with 5% plasma and 1 unit in 100% plasma. Units (n = 10) were stored under standard conditions and assayed for in vitro properties on Days 1, 5, and 7. The data were analyzed by analysis of variance for repeated measures (n = 10, p < 0.001). On Day 5 of storage, PLTs suspended in the M-sol formulation containing calcium but lacking citric acid had similar pH, extent of shape change (ESC) values, and percentage of CD62-positive PLTs and greater hypotonic shock response (HSR) and percentage of discoid PLTs compared to those of PLTs suspended in 100% plasma. In contrast, PLTs suspended in the M-sol formulation lacking calcium had lesser ESC values, greater percentage of CD62-positive PLTs, and similar HSR values and percentage of discoid PLTs compared to those of PLTs suspended in 100% plasma on Day 5 (p < 0.001). Calcium plays an important role in maintaining CD62-negative PLTs and relatively high ESC in 5% plasma. The removal of citric acid from M-sol may improve PLT storage properties with low plasma levels.

Evidence that formulations of the selective MAO-B inhibitor, selegiline, which bypass first-pass metabolism, also inhibit MAO-A in the human brain

DOE PAGES

Fowler, Joanna S.; Logan, Jean; Volkow, Nora D.; ...

2015-10-29

Selegiline (L-deprenyl) is a selective, irreversible inhibitor of monoamine oxidase B (MAO-B) at the conventional dose (10 mg/day oral) that is used in the treatment of Parkinson’s disease. However, controlled studies have demonstrated antidepressant activity for high doses of oral selegiline and for transdermal selegiline suggesting that when plasma levels of selegiline are elevated, brain MAO-A might also be inhibited. Zydis selegiline (Zelapar®) is an orally disintegrating formulation of selegiline, which is absorbed through the buccal mucosa producing higher plasma levels of selegiline and reduced amphetamine metabolites compared to equal doses of conventional selegiline. Although there is indirect evidence thatmore » Zydis selegiline at high doses loses its selectivity for MAO-B, there is no direct evidence that it also inhibits brain MAO-A in humans. We measured brain MAO-A in 18 healthy men after a 28-day treatment with Zydis selegiline (2.5, 5.0, or 10 mg/day) and in 3 subjects receiving the selegiline transdermal system (Emsam patch, 6 mg/day) using PET and the MAO-A radiotracer [¹¹C]clorgyline. We also measured dopamine transporter (DAT) availability in three subjects from the 10 mg group. The 10 mg Zydis selegiline dose significantly inhibited MAO-A (36.9 ± 19.7%, range 11–70%, p<0.007)) but not DAT; and while Emsam also inhibited MAO-A (33.2 ± 28.9 (range 9-68%) the difference did not reach significance (p=0.10)) presumably because of the small sample size. Our results provide the first direct evidence of brain MAO-A inhibition in humans by formulations of selegiline, which are currently postulated but not verified to target brain MAO-A in addition to MAO-B.« less

Evidence that formulations of the selective MAO-B inhibitor, selegiline, which bypass first-pass metabolism, also inhibit MAO-A in the human brain

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fowler, Joanna S.; Logan, Jean; Volkow, Nora D.

Selegiline (L-deprenyl) is a selective, irreversible inhibitor of monoamine oxidase B (MAO-B) at the conventional dose (10 mg/day oral) that is used in the treatment of Parkinson’s disease. However, controlled studies have demonstrated antidepressant activity for high doses of oral selegiline and for transdermal selegiline suggesting that when plasma levels of selegiline are elevated, brain MAO-A might also be inhibited. Zydis selegiline (Zelapar®) is an orally disintegrating formulation of selegiline, which is absorbed through the buccal mucosa producing higher plasma levels of selegiline and reduced amphetamine metabolites compared to equal doses of conventional selegiline. Although there is indirect evidence thatmore » Zydis selegiline at high doses loses its selectivity for MAO-B, there is no direct evidence that it also inhibits brain MAO-A in humans. We measured brain MAO-A in 18 healthy men after a 28-day treatment with Zydis selegiline (2.5, 5.0, or 10 mg/day) and in 3 subjects receiving the selegiline transdermal system (Emsam patch, 6 mg/day) using PET and the MAO-A radiotracer [¹¹C]clorgyline. We also measured dopamine transporter (DAT) availability in three subjects from the 10 mg group. The 10 mg Zydis selegiline dose significantly inhibited MAO-A (36.9 ± 19.7%, range 11–70%, p<0.007)) but not DAT; and while Emsam also inhibited MAO-A (33.2 ± 28.9 (range 9-68%) the difference did not reach significance (p=0.10)) presumably because of the small sample size. Our results provide the first direct evidence of brain MAO-A inhibition in humans by formulations of selegiline, which are currently postulated but not verified to target brain MAO-A in addition to MAO-B.« less

Development and validation of a stability-indicating HPLC-UV method for the determination of triamcinolone acetonide and its degradation products in an ointment formulation.

PubMed

van Heugten, A J P; de Boer, W; de Vries, W S; Markesteijn, C M A; Vromans, H

2018-02-05

A stability indicating high performance liquid chromatography method has been developed for the determination of triamcinolone acetonide (TCA) and its main degradation products in ointment formulations. The method, based on extensive stress testing using metal salts, azobisisobutyronitrile, acid, base and peroxide, showed that TCA undergoes oxidative degradation. All degradation products were identified using HPLC mass spectrometry. Separation and quantification was achieved using an Altima C18 RP18 HP column (250×4.6mm 2 , with 5μm particles) using a mobile phase consisting of acetonitrile and water buffered at pH 7 using 10mM phosphate buffer. A gradient mode was operated at a flow rate of 1.5ml/min and detection was at 241nm. The method showed linearity for TCA and Impurity C in 0.02-125% of the workload, both square roots of the correlation coefficients were larger than 0.9999. Repeatability and intermediate precision were performed by six consecutive injections of both 1.25% and 125% of the work load for both TCA and Impurity C divided equally over two days. RSD were 0.6% and 0.7% for TCA and 0.5% and 0.1% for Impurity C respectively. Accuracy was determined as well, the average recoveries were 99.5% (±0.1%, n=3) for TCA and 96.9% (±1.3%, n=3) for impurity C respectively from spiked ointment samples. The robustness was also evaluated by variations of column (old vs new), mobile phase pH and filter retention. The applicability of the method was evaluated by analysis of a commercial ointment formulation. Interestingly, the extensive stress tests were able to predict all degradation products of TCA in a long term stability ointment sample. Copyright © 2017 Elsevier B.V. All rights reserved.

A Paired, Double-Blind, Randomized Comparison of a Moisturizing Durable Barrier Cream to 10% Glycerine Cream in the Prophylactic Management of Postmastectomy Irradiation Skin Care: Trans Tasman Radiation Oncology Group (TROG) 04.01

DOE Office of Scientific and Technical Information (OSTI.GOV)

Graham, Peter H., E-mail: peter.graham@sesiahs.health.nsw.gov.au; Plant, Natalie; Graham, Jennifer L.

2013-05-01

Purpose: A previous, unblinded study demonstrated that an alcohol-free barrier film containing an acrylate terpolymer (ATP) was effective in reducing skin reactions compared with a 10% glycerine cream (sorbolene). The different appearances of these products precluded a blinded comparison. To test the acrylate terpolymer principle in a double-blinded manner required the use of an alternative cream formulation, a moisturizing durable barrier cream (MDBC); the study was conducted by the Trans Tasman Radiation Oncology Group (TROG) as protocol 04.01. Methods and Materials: A total of 333 patients were randomized; 1 patient was ineligible and 14 patients withdrew or had less thanmore » 7 weeks' observations, leaving 318 for analysis. The chest wall was divided into medial and lateral compartments, and patients were randomized to have MDBC applied daily to the medial or lateral compartment and sorbolene to the other compartment. Weekly observations, photographs, and symptom scores (pain and pruritus) were collected to week 12 or resolution of skin reactions if earlier. Skin dose was confirmed by centrally calibrated thermoluminescent dosimeters. Results: Rates of medial and lateral compartment Common Toxicity Criteria (CTC), version 3, greater than or equal to grade 3 skin reactions were 23% and 41%, but rates by skin care product were identical at 32%. There was no significant difference between MDBC and sorbolene in the primary endpoint of peak skin reactions or secondary endpoints of area-under-the-curve skin reaction scores. Conclusions: The MDBC did not reduce the peak skin reaction compared to sorbolene. It is possible that this is related to the difference in the formulation of the cream compared with the film formulation. Skin dosimetry verification and double blinding are essential for radiation skin care comparative studies.« less

Quantum Dynamics in Continuum for Proton Transport I: Basic Formulation.

PubMed

Chen, Duan; Wei, Guo-Wei

2013-01-01

Proton transport is one of the most important and interesting phenomena in living cells. The present work proposes a multiscale/multiphysics model for the understanding of the molecular mechanism of proton transport in transmembrane proteins. We describe proton dynamics quantum mechanically via a density functional approach while implicitly model other solvent ions as a dielectric continuum to reduce the number of degrees of freedom. The densities of all other ions in the solvent are assumed to obey the Boltzmann distribution. The impact of protein molecular structure and its charge polarization on the proton transport is considered explicitly at the atomic level. We formulate a total free energy functional to put proton kinetic and potential energies as well as electrostatic energy of all ions on an equal footing. The variational principle is employed to derive nonlinear governing equations for the proton transport system. Generalized Poisson-Boltzmann equation and Kohn-Sham equation are obtained from the variational framework. Theoretical formulations for the proton density and proton conductance are constructed based on fundamental principles. The molecular surface of the channel protein is utilized to split the discrete protein domain and the continuum solvent domain, and facilitate the multiscale discrete/continuum/quantum descriptions. A number of mathematical algorithms, including the Dirichlet to Neumann mapping, matched interface and boundary method, Gummel iteration, and Krylov space techniques are utilized to implement the proposed model in a computationally efficient manner. The Gramicidin A (GA) channel is used to demonstrate the performance of the proposed proton transport model and validate the efficiency of proposed mathematical algorithms. The electrostatic characteristics of the GA channel is analyzed with a wide range of model parameters. The proton conductances are studied over a number of applied voltages and reference concentrations. A comparison with experimental data verifies the present model predictions and validates the proposed model.

Testing continuum descriptions of low-Mach-number shock structures

NASA Technical Reports Server (NTRS)

Pham-Van-diep, Gerald C.; Erwin, Daniel A.; Muntz, E. P.

1991-01-01

Numerical experiments have been performed on normal shock waves with Monte Carlo Direct Simulations (MCDS's) to investigate the validity of continuum theories at very low Mach numbers. Results from the Navier-Stokes and the Burnett equations are compared to MCDS's for both hard-sphere and Maxwell gases. It is found that the maximum-slope shock thicknesses are described equally well (within the MCDS computational scatter) by either of the continuum formulations for Mach numbers smaller than about 1.2. For Mach numbers greater that 1.2, the Burnett predictions are more accurate than the Navier-Stokes results. Temperature-density profile separations are best described by the Burnett equations for Mach numbers greater than about 1.3. At lower Mach numbers the MCDS scatter is too great to differentiate between the two continuum theories. For all Mach numbers above one, the shock shapes are more accurately described by the Burnett equations.

Towards a Genetic Theory for the Evolution of the Sex Ratio

PubMed Central

Uyenoyama, Marcy K.; Bengtsson, Bengt Olle

1979-01-01

A genetical model is formulated in which the sex ratio in broods and the relative size of broods are determined by the genotype at an autosomal locus. The results also apply to the case in which the sex-ratio locus is sex linked and expressed in the homogametic sex and to the case in which the locus is expressed in the diploid sex of a haplodiploid organism. Fisher (1930) argued that the sex ratio evolves under natural selection to a value such that parental expenditure is equalized between the sexes. Shaw and Mohler (1953) and MacArthur (1965) proposed that the sex ratio evolves to increase a certain expression for fitness. The sex ratio suggested by Fisher (1930) is in fact identical to the sex ratio specified by these maximization principles. Further, in our model, the Fisherian sex ratio corresponds exactly to the sex ratio at certain equilibria that are approached whenever they exist. PMID:17248977

From Feynman rules to conserved quantum numbers, I

NASA Astrophysics Data System (ADS)

Nogueira, P.

2017-05-01

In the context of Quantum Field Theory (QFT) there is often the need to find sets of graph-like diagrams (the so-called Feynman diagrams) for a given physical model. If negative, the answer to the related problem 'Are there any diagrams with this set of external fields?' may settle certain physical questions at once. Here the latter problem is formulated in terms of a system of linear diophantine equations derived from the Lagrangian density, from which necessary conditions for the existence of the required diagrams may be obtained. Those conditions are equalities that look like either linear diophantine equations or linear modular (i.e. congruence) equations, and may be found by means of fairly simple algorithms that involve integer computations. The diophantine equations so obtained represent (particle) number conservation rules, and are related to the conserved (additive) quantum numbers that may be assigned to the fields of the model.

A finite-element analysis for steady and oscillatory supersonic flows around complex configurations

NASA Technical Reports Server (NTRS)

Morino, L.; Chen, L. T.

1974-01-01

The problem of small perturbation potential supersonic flow around complex configurations is considered. This problem requires the solution of an integral equation relating the values of the potential on the surface of the body to the values of the normal derivative, which is known from the small perturbation boundary conditions. The surface of the body is divided into small (hyperboloidal quadrilateral) surface elements, sigma sub i, which are described in terms of the Cartesian components of the four corner points. The values of the potential (and its normal derivative) within each element is assumed to be constant and equal to its value at the centroid of the element, and this yields a set of linear algebraic equations. The coefficients of the equation are given by source and doublet integrals over the surface elements, sigma sub i. The results obtained using the above formulation are compared with existing analytical and experimental results.

Advanced Aerodynamic Design of Passive Porosity Control Effectors

NASA Technical Reports Server (NTRS)

Hunter, Craig A.; Viken, Sally A.; Wood, Richard M.; Bauer, Steven X. S.

2001-01-01

This paper describes aerodynamic design work aimed at developing a passive porosity control effector system for a generic tailless fighter aircraft. As part of this work, a computational design tool was developed and used to layout passive porosity effector systems for longitudinal and lateral-directional control at a low-speed, high angle of attack condition. Aerodynamic analysis was conducted using the NASA Langley computational fluid dynamics code USM3D, in conjunction with a newly formulated surface boundary condition for passive porosity. Results indicate that passive porosity effectors can provide maneuver control increments that equal and exceed those of conventional aerodynamic effectors for low-speed, high-alpha flight, with control levels that are a linear function of porous area. This work demonstrates the tremendous potential of passive porosity to yield simple control effector systems that have no external moving parts and will preserve an aircraft's fixed outer mold line.

Lorentz-invariant three-vectors and alternative formulation of relativistic dynamics

NASA Astrophysics Data System (ADS)

RÈ©bilas, Krzysztof

2010-03-01

Besides the well-known scalar invariants, there also exist vectorial invariants in special relativity. It is shown that the three-vector (dp⃗/dt)∥+γv(dp⃗/dt)⊥ is invariant under the Lorentz transformation. The subscripts ∥ and ⊥ denote the respective components with respect to the direction of the velocity of the body v⃗, and p⃗ is the relativistic momentum. We show that this vector is equal to a force F⃗R, which satisfies the classical Newtonian law F⃗R=ma⃗R in the instantaneous inertial rest frame of an accelerating body. Therefore, the relation F⃗R=(dp⃗/dt)∥+γv(dp⃗/dt)⊥, based on the Lorentz-invariant vectors, may be used as an invariant (not merely a covariant) relativistic equation of motion in any inertial system of reference. An alternative approach to classical electrodynamics based on the invariant three-vectors is proposed.

Effect of ivermectin treatment on eosinophilic pneumonia and other extravascular lesions of late Strongylus vulgaris larval migration in foals.

PubMed

Turk, M A; Klei, T R

1984-01-01

Eighteen parasite-free pony foals were infected orally with 500 third stage larvae of Strongylus vulgaris. At 56 days after infection, six ponies were treated with intramuscular ivermectin (22, 23-dihydroavermectin B1); six were treated with oral ivermectin; and six were not treated. Necropsy was done 91 days after infection to study the pathologic effects of migrating S. vulgaris larvae and to determine the efficacy of ivermectin in attenuation of S. vulgaris-induced lesions. Larval migration induced eosinophilic inflammation of the liver, spleen, mesenteric, colic and cecal lymph nodes, and small and large intestine. Previously unreported parasitic lesions included eosinophilic pneumonia with eosinophilic granulomas and pulmonary lymphoid nodules. S. vulgaris larvae were observed in eosinophilic granulomas in the lung, epicardium, liver, and intestinal serosa. Injectable and oral ivermectin formulations were equally effective in reduction of these lesions.

Structural characterization and stability of dimethylaminoethanol and dimethylaminoethanol bitartrate for possible use in cosmetic firming.

PubMed

Clares, B; Ruíz, M A; Morales, M E; Tamayo, J A; Lara, V Gallardo

2010-01-01

2-Dimethylaminoethanol (DMAE) (also known as deanol) has been used as an ingredient in skin care, and in cognitive function- and mood-enhancing products. It is marketed as a free base or salt, and in theory, the two forms should be equally effective and able to substitute for each other in pharmaceutical formulations. Detecting possible alterations in the active principle is a basic part of preformulation studies. Accordingly, this study compared DMAE and DMAE bitartrate to identify potential alterations or differences between the free base and the salt that might compromise the long-term stability of cosmetic preparations at different temperatures, and also compared the behavior of the base substance and derivative alone and in solution. Samples were analyzed with different physicochemical methods such as differential scanning calorimetry, ultraviolet and infrared spectroscopy, and nuclear magnetic resonance spectroscopy.

2D data-space cross-gradient joint inversion of MT, gravity and magnetic data

NASA Astrophysics Data System (ADS)

Pak, Yong-Chol; Li, Tonglin; Kim, Gang-Sop

2017-08-01

We have developed a data-space multiple cross-gradient joint inversion algorithm, and validated it through synthetic tests and applied it to magnetotelluric (MT), gravity and magnetic datasets acquired along a 95 km profile in Benxi-Ji'an area of northeastern China. To begin, we discuss a generalized cross-gradient joint inversion for multiple datasets and model parameters sets, and formulate it in data space. The Lagrange multiplier required for the structural coupling in the data-space method is determined using an iterative solver to avoid calculation of the inverse matrix in solving the large system of equations. Next, using model-space and data-space methods, we inverted the synthetic data and field data. Based on our result, the joint inversion in data-space not only delineates geological bodies more clearly than the separate inversion, but also yields nearly equal results with the one in model-space while consuming much less memory.

Set selection dynamical system neural networks with partial memories, with applications to Sudoku and KenKen puzzles.

PubMed

Boreland, B; Clement, G; Kunze, H

2015-08-01

After reviewing set selection and memory model dynamical system neural networks, we introduce a neural network model that combines set selection with partial memories (stored memories on subsets of states in the network). We establish that feasible equilibria with all states equal to ± 1 correspond to answers to a particular set theoretic problem. We show that KenKen puzzles can be formulated as a particular case of this set theoretic problem and use the neural network model to solve them; in addition, we use a similar approach to solve Sudoku. We illustrate the approach in examples. As a heuristic experiment, we use online or print resources to identify the difficulty of the puzzles and compare these difficulties to the number of iterations used by the appropriate neural network solver, finding a strong relationship. Copyright © 2015 Elsevier Ltd. All rights reserved.

Free flow cell electrophoresis using zwitterionic buffer

NASA Technical Reports Server (NTRS)

Rodkey, R. Scott

1990-01-01

Studies of a zwitterionic buffer formulated for cell electrophoresis were done using the McDonnell-Douglas Continuous Flow Electrophoresis System. Standard buffers were analyzed for their stability in the electrical field and the results showed that both buffers tested were inherently unstable. Further, titration studies showed that the standards buffers buffered poorly at the pH employed for electrophoresis. The zwitterionic buffer buffered well at its nominal pH and was shown to be stable in the electrical field. Comparative studies of the buffer with standard cell separation buffers using formalin fixed rabbit and goose red blood cells showed that the zwitterionic buffer gave better resolution of the fixed cells. Studies with viable hybridoma cells showed that buffer Q supported cell viability equal to Hank's Balanced Salt Solution and that hybridoma cells in different stages of the growth cycle demonstrated reproducible differences in electrophoretic mobility.

Value congruence in health care priority setting: social values, institutions and decisions in three countries.

PubMed

Landwehr, Claudia; Klinnert, Dorothea

2015-04-01

Most developed democracies have faced the challenge of priority setting in health care by setting up specialized agencies to take decisions on which medical services to include in public health baskets. Under the influence of Daniels and Sabin's seminal work on the topic, agencies increasingly aim to fulfil criteria of procedural justice, such as accountability and transparency. We assume, however, that the institutional design of agencies also and necessarily reflects substantial value judgments on the respective weight of distributive principles such as efficiency, need and equality. The public acceptance of prioritization decisions, and eventually of the health care system at large, will ultimately depend not only on considerations of procedural fairness, but also on the congruence between a society's values and its institutions. We study social values, institutions and decisions in three countries (France, Germany and the United Kingdom) in order to assess such congruence and formulate expectations on its effects.

Fitting aerodynamic forces in the Laplace domain: An application of a nonlinear nongradient technique to multilevel constrained optimization

NASA Technical Reports Server (NTRS)

Tiffany, S. H.; Adams, W. M., Jr.

1984-01-01

A technique which employs both linear and nonlinear methods in a multilevel optimization structure to best approximate generalized unsteady aerodynamic forces for arbitrary motion is described. Optimum selection of free parameters is made in a rational function approximation of the aerodynamic forces in the Laplace domain such that a best fit is obtained, in a least squares sense, to tabular data for purely oscillatory motion. The multilevel structure and the corresponding formulation of the objective models are presented which separate the reduction of the fit error into linear and nonlinear problems, thus enabling the use of linear methods where practical. Certain equality and inequality constraints that may be imposed are identified; a brief description of the nongradient, nonlinear optimizer which is used is given; and results which illustrate application of the method are presented.

Scattering amplitudes from multivariate polynomial division

NASA Astrophysics Data System (ADS)

Mastrolia, Pierpaolo; Mirabella, Edoardo; Ossola, Giovanni; Peraro, Tiziano

2012-11-01

We show that the evaluation of scattering amplitudes can be formulated as a problem of multivariate polynomial division, with the components of the integration-momenta as indeterminates. We present a recurrence relation which, independently of the number of loops, leads to the multi-particle pole decomposition of the integrands of the scattering amplitudes. The recursive algorithm is based on the weak Nullstellensatz theorem and on the division modulo the Gröbner basis associated to all possible multi-particle cuts. We apply it to dimensionally regulated one-loop amplitudes, recovering the well-known integrand-decomposition formula. Finally, we focus on the maximum-cut, defined as a system of on-shell conditions constraining the components of all the integration-momenta. By means of the Finiteness Theorem and of the Shape Lemma, we prove that the residue at the maximum-cut is parametrized by a number of coefficients equal to the number of solutions of the cut itself.

Finite element stress analysis of the human left ventricle whose irregular shape is developed from single plane cineangiocardiogram

NASA Technical Reports Server (NTRS)

Ghista, D. N.; Hamid, M. S.

1977-01-01

The three-dimensional left ventricular chamber geometrical model is developed from single plane cineangiocardiogram. This left ventricular model is loaded by an internal pressure monitored by cardiac catheterization. The resulting stresses in the left ventricular model chamber's wall are determined by computerized finite element procedure. For the discretization of this left ventricular model structure, a 20-node, isoparametric finite element is employed. The analysis and formulation of the computerised procedure is presented in the paper, along with the detailed algorithms and computer programs. The procedure is applied to determine the stresses in a left ventricle at an instant, during systole. Next, a portion (represented by a finite element) of this left ventricular chamber is simulated as being infarcted by making its active-state modulus value equal to its passive-state value; the neighbouring elements are shown to relieve the 'infarcted' element of stress by themselves taking on more stress.

Optimal leveling of flow over one-dimensional topography by Marangoni stresses

NASA Astrophysics Data System (ADS)

Gramlich, C. M.; Homsy, G. M.; Kalliadasis, Serafim

2001-11-01

A thin viscous film flowing over a step down in topography exhibits a capillary ridge near the step, which may be undesirable in applications. This paper investigates optimal leveling of the ridge by means of a Marangoni stress such as might be produced by a localized heater creating temperature variations at the film surface. Lubrication theory results in a differential equation for the free surface, which can be solved numerically for any given topography and temperature profile. Leveling the ridge is then formulated as an optimization problem to minimize the maximum free-surface height by varying the heater strength, position, and width. Optimized heaters with 'top-hat' or parabolic temperature profiles replace the original ridge with two smaller ridges of equal size, achieving leveling of better than 50%. An optimized asymmetric n-step temperature distribution results in (n+1) ridges and reduces the variation in surface height by a factor of better than 1/(n+1).

Parametric study in weld mismatch of longitudinally welded SSME HPFTP inlet

NASA Technical Reports Server (NTRS)

Min, J. B.; Spanyer, K. L.; Brunair, R. M.

1991-01-01

Welded joints are an essential part of pressure vessels such as the Space Shuttle Main Engine (SSME) Turbopumps. Defects produced in the welding process can be detrimental to weld performance. Recently, review of the SSME high pressure fuel turbopump (HPFTP) titanium inlet x rays revealed several weld discrepancies such as penetrameter density issues, film processing discrepancies, weld width discrepancies, porosity, lack of fusion, and weld offsets. Currently, the sensitivity of welded structures to defects is of concern. From a fatigue standpoint, weld offset may have a serious effect since local yielding, in general, aggravates cyclic stress effects. Therefore, the weld offset issue is considered. Using the finite element method and mathematical formulations, parametric studies were conducted to determine the influence of weld offsets and a variation of weld widths in longitudinally welded cylindrical structures with equal wall thickness on both sides of the joint. From the study, the finite element results and theoretical solutions are presented.

A finite-element analysis for steady and oscillatory subsonic flow around complex configurations

NASA Technical Reports Server (NTRS)

Chen, L. T.; Suciu, E. O.; Morino, L.

1974-01-01

The problem of potential subsonic flow around complex configurations is considered. The solution is given of an integral equation relating the values of the potential on the surface of the body to the values of the normal derivative, which is known from the boundary conditions. The surface of the body is divided into small (hyperboloidal quadrilateral) surface elements, which are described in terms of the Cartesian components of the four corner points. The values of the potential (and its normal derivative) within each element is assumed to be constant and equal to its value at the centroid of the element. The coefficients of the equation are given by source and doublet integrals over the surface elements. Closed form evaluations of the integrals are presented. The results obtained with the above formulation are compared with existing analytical and experimental results.

Formation and stability of twisted ribbons in mixtures of rod-like fd-virus and non-adsorbing polymer

NASA Astrophysics Data System (ADS)

Dogic, Z.; Didonna, B.; Bryning, M.; Lubensky, T. C.; Yodh, A. G.; Janmey, P. A.

2003-03-01

We are investigating the behavior of mixtures of monodisperse fd-virus rods and non-adsorbing polymer. We observe the formation of isolated smectic disks. The single smectic disk is of a monolayer of aligned rods while its thickness equal to the length of a single rod. As disks coalesce they undergo shape transformations from flat structures to elongated twisted ribbons. A theoretical model is formulated wherein the chirality of the molecule favors the formation of the elongated ribbon structure while the line tension favors formation of untwisted disks. To check the validity of the theoretical model line tension and twist constants are experimentally measured. The line tension is deduced from thermal fluctuations of the interface. The twist constant is determined by unwinding the twisted ribbons using optical tweezers. This work is partially supported by NSF grants DMR-0203378, the PENN MRSEC, DMR-0079909, and NASA grant NAG8-2172.

Relativistic theory of surficial Love numbers

NASA Astrophysics Data System (ADS)

Landry, Philippe; Poisson, Eric

2014-06-01

A relativistic theory of surficial Love numbers, which characterize the surface deformation of a body subjected to tidal forces, was initiated by Damour and Nagar. We revisit this effort in order to extend it, clarify some of its aspects, and simplify its computational implementation. First, we refine the definition of surficial Love numbers proposed by Damour and Nagar and formulate it directly in terms of the deformed curvature of the body's surface, a meaningful geometrical quantity. Second, we develop a unified theory of surficial Love numbers that applies equally well to material bodies and black holes. Third, we derive a compactness-dependent relation between the surficial and (electric-type) gravitational Love numbers of a perfect-fluid body and show that it reduces to the familiar Newtonian relation when the compactness is small. And fourth, we simplify the tasks associated with the practical computation of the surficial and gravitational Love numbers for a material body.

Advanced spectrophotometric chemometric methods for resolving the binary mixture of doxylamine succinate and pyridoxine hydrochloride.

PubMed

Katsarov, Plamen; Gergov, Georgi; Alin, Aylin; Pilicheva, Bissera; Al-Degs, Yahya; Simeonov, Vasil; Kassarova, Margarita

2018-03-01

The prediction power of partial least squares (PLS) and multivariate curve resolution-alternating least squares (MCR-ALS) methods have been studied for simultaneous quantitative analysis of the binary drug combination - doxylamine succinate and pyridoxine hydrochloride. Analysis of first-order UV overlapped spectra was performed using different PLS models - classical PLS1 and PLS2 as well as partial robust M-regression (PRM). These linear models were compared to MCR-ALS with equality and correlation constraints (MCR-ALS-CC). All techniques operated within the full spectral region and extracted maximum information for the drugs analysed. The developed chemometric methods were validated on external sample sets and were applied to the analyses of pharmaceutical formulations. The obtained statistical parameters were satisfactory for calibration and validation sets. All developed methods can be successfully applied for simultaneous spectrophotometric determination of doxylamine and pyridoxine both in laboratory-prepared mixtures and commercial dosage forms.

Fast polar decomposition of an arbitrary matrix

NASA Technical Reports Server (NTRS)

Higham, Nicholas J.; Schreiber, Robert S.

1988-01-01

The polar decomposition of an m x n matrix A of full rank, where m is greater than or equal to n, can be computed using a quadratically convergent algorithm. The algorithm is based on a Newton iteration involving a matrix inverse. With the use of a preliminary complete orthogonal decomposition the algorithm can be extended to arbitrary A. How to use the algorithm to compute the positive semi-definite square root of a Hermitian positive semi-definite matrix is described. A hybrid algorithm which adaptively switches from the matrix inversion based iteration to a matrix multiplication based iteration due to Kovarik, and to Bjorck and Bowie is formulated. The decision when to switch is made using a condition estimator. This matrix multiplication rich algorithm is shown to be more efficient on machines for which matrix multiplication can be executed 1.5 times faster than matrix inversion.

A least-squares finite element method for 3D incompressible Navier-Stokes equations

NASA Technical Reports Server (NTRS)

Jiang, Bo-Nan; Lin, T. L.; Hou, Lin-Jun; Povinelli, Louis A.

1993-01-01

The least-squares finite element method (LSFEM) based on the velocity-pressure-vorticity formulation is applied to three-dimensional steady incompressible Navier-Stokes problems. This method can accommodate equal-order interpolations, and results in symmetric, positive definite algebraic system. An additional compatibility equation, i.e., the divergence of vorticity vector should be zero, is included to make the first-order system elliptic. The Newton's method is employed to linearize the partial differential equations, the LSFEM is used to obtain discretized equations, and the system of algebraic equations is solved using the Jacobi preconditioned conjugate gradient method which avoids formation of either element or global matrices (matrix-free) to achieve high efficiency. The flow in a half of 3D cubic cavity is calculated at Re = 100, 400, and 1,000 with 50 x 52 x 25 trilinear elements. The Taylor-Gortler-like vortices are observed at Re = 1,000.

Social dilemma alleviated by sharing the gains with immediate neighbors

NASA Astrophysics Data System (ADS)

Wu, Zhi-Xi; Yang, Han-Xin

2014-01-01

We study the evolution of cooperation in the evolutionary spatial prisoner's dilemma game (PDG) and snowdrift game (SG), within which a fraction α of the payoffs of each player gained from direct game interactions is shared equally by the immediate neighbors. The magnitude of the parameter α therefore characterizes the degree of the relatedness among the neighboring players. By means of extensive Monte Carlo simulations as well as an extended mean-field approximation method, we trace the frequency of cooperation in the stationary state. We find that plugging into relatedness can significantly promote the evolution of cooperation in the context of both studied games. Unexpectedly, cooperation can be more readily established in the spatial PDG than that in the spatial SG, given that the degree of relatedness and the cost-to-benefit ratio of mutual cooperation are properly formulated. The relevance of our model with the stakeholder theory is also briefly discussed.

Site Distribution and Aliasing Effects in the Inversion for Load Coefficients and Geocenter Motion from GPS Data

NASA Technical Reports Server (NTRS)

Wu, Xiaoping; Argus, Donald F.; Heflin, Michael B.; Ivins, Erik R.; Webb, Frank H.

2002-01-01

Precise GPS measurements of elastic relative site displacements due to surface mass loading offer important constraints on global surface mass transport. We investigate effects of site distribution and aliasing by higher-degree (n greater than or equal 2) loading terms on inversion of GPS data for n = 1 load coefficients and geocenter motion. Covariance and simulation analyses are conducted to assess the sensitivity of the inversion to aliasing and mismodeling errors and possible uncertainties in the n = 1 load coefficient determination. We found that the use of center-of-figure approximation in the inverse formulation could cause 10- 15% errors in the inverted load coefficients. n = 1 load estimates may be contaminated significantly by unknown higher-degree terms, depending on the load scenario and the GPS site distribution. The uncertainty in n = 1 zonal load estimate is at the level of 80 - 95% for two load scenarios.

Automatic design of basin-specific drought indexes for highly regulated water systems

NASA Astrophysics Data System (ADS)

Zaniolo, Marta; Giuliani, Matteo; Castelletti, Andrea Francesco; Pulido-Velazquez, Manuel

2018-04-01

Socio-economic costs of drought are progressively increasing worldwide due to undergoing alterations of hydro-meteorological regimes induced by climate change. Although drought management is largely studied in the literature, traditional drought indexes often fail at detecting critical events in highly regulated systems, where natural water availability is conditioned by the operation of water infrastructures such as dams, diversions, and pumping wells. Here, ad hoc index formulations are usually adopted based on empirical combinations of several, supposed-to-be significant, hydro-meteorological variables. These customized formulations, however, while effective in the design basin, can hardly be generalized and transferred to different contexts. In this study, we contribute FRIDA (FRamework for Index-based Drought Analysis), a novel framework for the automatic design of basin-customized drought indexes. In contrast to ad hoc empirical approaches, FRIDA is fully automated, generalizable, and portable across different basins. FRIDA builds an index representing a surrogate of the drought conditions of the basin, computed by combining all the relevant available information about the water circulating in the system identified by means of a feature extraction algorithm. We used the Wrapper for Quasi-Equally Informative Subset Selection (W-QEISS), which features a multi-objective evolutionary algorithm to find Pareto-efficient subsets of variables by maximizing the wrapper accuracy, minimizing the number of selected variables, and optimizing relevance and redundancy of the subset. The preferred variable subset is selected among the efficient solutions and used to formulate the final index according to alternative model structures. We apply FRIDA to the case study of the Jucar river basin (Spain), a drought-prone and highly regulated Mediterranean water resource system, where an advanced drought management plan relying on the formulation of an ad hoc state index is used for triggering drought management measures. The state index was constructed empirically with a trial-and-error process begun in the 1980s and finalized in 2007, guided by the experts from the Confederación Hidrográfica del Júcar (CHJ). Our results show that the automated variable selection outcomes align with CHJ's 25-year-long empirical refinement. In addition, the resultant FRIDA index outperforms the official State Index in terms of accuracy in reproducing the target variable and cardinality of the selected inputs set.

A Phase 1 Trial of MSP2-C1, a Blood-Stage Malaria Vaccine Containing 2 Isoforms of MSP2 Formulated with Montanide® ISA 720

PubMed Central

McCarthy, James S.; Marjason, Joanne; Elliott, Suzanne; Fahey, Paul; Bang, Gilles; Malkin, Elissa; Tierney, Eveline; Aked-Hurditch, Hayley; Adda, Christopher; Cross, Nadia; Richards, Jack S.; Fowkes, Freya J. I.; Boyle, Michelle J.; Long, Carole; Druilhe, Pierre; Beeson, James G.; Anders, Robin F.

2011-01-01

Background In a previous Phase 1/2b malaria vaccine trial testing the 3D7 isoform of the malaria vaccine candidate Merozoite surface protein 2 (MSP2), parasite densities in children were reduced by 62%. However, breakthrough parasitemias were disproportionately of the alternate dimorphic form of MSP2, the FC27 genotype. We therefore undertook a dose-escalating, double-blinded, placebo-controlled Phase 1 trial in healthy, malaria-naïve adults of MSP2-C1, a vaccine containing recombinant forms of the two families of msp2 alleles, 3D7 and FC27 (EcMSP2-3D7 and EcMSP2-FC27), formulated in equal amounts with Montanide® ISA 720 as a water-in-oil emulsion. Methodology/Principal Findings The trial was designed to include three dose cohorts (10, 40, and 80 µg), each with twelve subjects receiving the vaccine and three control subjects receiving Montanide® ISA 720 adjuvant emulsion alone, in a schedule of three doses at 12-week intervals. Due to unexpected local reactogenicity and concern regarding vaccine stability, the trial was terminated after the second immunisation of the cohort receiving the 40 µg dose; no subjects received the 80 µg dose. Immunization induced significant IgG responses to both isoforms of MSP2 in the 10 µg and 40 µg dose cohorts, with antibody levels by ELISA higher in the 40 µg cohort. Vaccine-induced antibodies recognised native protein by Western blots of parasite protein extracts and by immunofluorescence microscopy. Although the induced anti-MSP2 antibodies did not directly inhibit parasite growth in vitro, IgG from the majority of individuals tested caused significant antibody-dependent cellular inhibition (ADCI) of parasite growth. Conclusions/Significance As the majority of subjects vaccinated with MSP2-C1 developed an antibody responses to both forms of MSP2, and that these antibodies mediated ADCI provide further support for MSP2 as a malaria vaccine candidate. However, in view of the reactogenicity of this formulation, further clinical development of MSP2-C1 will require formulation of MSP2 in an alternative adjuvant. Trial Registration Australian New Zealand Clinical Trials Registry 12607000552482 PMID:21949716

Density-based global sensitivity analysis of sheet-flow travel time: Kinematic wave-based formulations

NASA Astrophysics Data System (ADS)

Hosseini, Seiyed Mossa; Ataie-Ashtiani, Behzad; Simmons, Craig T.

2018-04-01

Despite advancements in developing physics-based formulations to estimate the sheet-flow travel time (tSHF), the quantification of the relative impacts of influential parameters on tSHF has not previously been considered. In this study, a brief review of the physics-based formulations to estimate tSHF including kinematic wave (K-W) theory in combination with Manning's roughness (K-M) and with Darcy-Weisbach friction formula (K-D) over single and multiple planes is provided. Then, the relative significance of input parameters to the developed approaches is quantified by a density-based global sensitivity analysis (GSA). The performance of K-M considering zero-upstream and uniform flow depth (so-called K-M1 and K-M2), and K-D formulae to estimate the tSHF over single plane surface were assessed using several sets of experimental data collected from the previous studies. The compatibility of the developed models to estimate tSHF over multiple planes considering temporal rainfall distributions of Natural Resources Conservation Service, NRCS (I, Ia, II, and III) are scrutinized by several real-world examples. The results obtained demonstrated that the main controlling parameters of tSHF through K-D and K-M formulae are the length of surface plane (mean sensitivity index T̂i = 0.72) and flow resistance (mean T̂i = 0.52), respectively. Conversely, the flow temperature and initial abstraction ratio of rainfall have the lowest influence on tSHF (mean T̂i is 0.11 and 0.12, respectively). The significant role of the flow regime on the estimation of tSHF over a single and a cascade of planes are also demonstrated. Results reveal that the K-D formulation provides more precise tSHF over the single plane surface with an average percentage of error, APE equal to 9.23% (the APE for K-M1 and K-M2 formulae were 13.8%, and 36.33%, respectively). The superiority of Manning-jointed formulae in estimation of tSHF is due to the incorporation of effects from different flow regimes as flow moves downgradient that is affected by one or more factors including high excess rainfall intensities, low flow resistance, high degrees of imperviousness, long surfaces, steep slope, and domination of rainfall distribution as NRCS Type I, II, or III.

The S-matrix in twistor space

NASA Astrophysics Data System (ADS)

Arkani-Hamed, N.; Cachazo, F.; Cheung, C.; Kaplan, J.

2010-03-01

The marvelous simplicity and remarkable hidden symmetries recently uncovered in (Super) Yang-Mills and (Super)Gravity scattering amplitudes strongly suggests the existence of a “weak-weak” dual formulation of these theories where these structures are made more manifest at the expense of manifest locality. In this note we suggest that in four dimensions, this dual description lives in (2, 2) signature and is naturally formulated in twistor space. We begin at tree-level, by recasting the momentum-space BCFW recursion relation in a completely on-shell form that begs to be transformed into twistor space. Our transformation is strongly inspired by Witten’s twistor string theory, but differs in treating twistor and dual twistor variables on a more equal footing; a related transcription of the BCFW formula using only twistor space variables has been carried out independently by Mason and Skinner. Using both twistor and dual twistor variables, the three and four-point amplitudes are strikingly simple-for Yang-Mills theories they are “1” or “-1”. The BCFW computation of higher-order amplitudes can be represented by a simple set of diagrammatic rules, concretely realizing Penrose’s program of relating “twistor diagrams” to scattering amplitudes. More specifically, we give a precise definition of the twistor diagram formalism developed over the past few years by Andrew Hodges. The “Hodges diagram” representation of the BCFW rules allows us to compute amplitudes and study their remarkable properties in twistor space. For instance the diagrams for Yang-Mills theory are topologically disks and not trees, and reveal striking connections between amplitudes that are not manifest in momentum space. Twistor space also suggests a new representation of the amplitudes directly in momentum space, that is naturally determined by the Hodges diagrams. The BCFW rules and Hodges diagrams also enable a systematic twistorial formulation of gravity. All tree amplitudes can be combined into an “S-Matrix” scattering functional which is the natural holographic observable in asymptotically flat space; the BCFW formula turns into a simple quadratic equation for this “S-Matrix” in twistor space, providing a holographic description of mathcal{N} = 4 SYM and mathcal{N} = 8 Supergravity at tree level. We move on to initiate the exploration of loop amplitudes in (2, 2) signature and twistor space, beginning with a discussion of their IR behavior. We find that the natural pole prescriptions needed for transformation to twistor space make the amplitudes perfectly well-defined objects, free of IR divergences. Indeed in momentum space, the loop amplitudes so regulated vanish for generic momenta, and transformed to twistor space, are even simpler than their tree-level counterparts: the full 4-pt one-loop amplitudes in mathcal{N} = 4 SYM are simply equal to “1” or “0”! This further supports the idea that there exists a sharply defined object corresponding to the S-Matrix in (2, 2) signature, computed by a dual theory naturally living in twistor space.

Can Gravity Probe B usefully constrain torsion gravity theories?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flanagan, Eanna E.; Rosenthal, Eran

2007-06-15

In most theories of gravity involving torsion, the source for torsion is the intrinsic spin of matter. Since the spins of fermions are normally randomly oriented in macroscopic bodies, the amount of torsion generated by macroscopic bodies is normally negligible. However, in a recent paper, Mao et al. (arXiv:gr-qc/0608121) point out that there is a class of theories, including the Hayashi-Shirafuji (1979) theory, in which the angular momentum of macroscopic spinning bodies generates a significant amount of torsion. They further argue that, by the principle of action equals reaction, one would expect the angular momentum of test bodies to couplemore » to a background torsion field, and therefore the precession of the Gravity Probe B gyroscopes should be affected in these theories by the torsion generated by the Earth. We show that in fact the principle of action equals reaction does not apply to these theories, essentially because the torsion is not an independent dynamical degree of freedom. We examine in detail a generalization of the Hayashi-Shirafuji theory suggested by Mao et al. called Einstein-Hayashi-Shirafuji theory. There are a variety of different versions of this theory, depending on the precise form of the coupling to matter chosen for the torsion. We show that, for any coupling to matter that is compatible with the spin transport equation postulated by Mao et al., the theory has either ghosts or an ill-posed initial-value formulation. These theoretical problems can be avoided by specializing the parameters of the theory and in addition choosing the standard minimal coupling to matter of the torsion tensor. This yields a consistent theory, but one in which the action equals reaction principle is violated, and in which the angular momentum of the gyroscopes does not couple to the Earth's torsion field. Thus, the Einstein-Hayashi-Shirafuji theory does not predict a detectable torsion signal for Gravity Probe B. There may be other torsion theories which do.« less

Animal Board Invited Review: Comparing conventional and organic livestock production systems on different aspects of sustainability.

PubMed

van Wagenberg, C P A; de Haas, Y; Hogeveen, H; van Krimpen, M M; Meuwissen, M P M; van Middelaar, C E; Rodenburg, T B

2017-10-01

To sustainably contribute to food security of a growing and richer world population, livestock production systems are challenged to increase production levels while reducing environmental impact, being economically viable, and socially responsible. Knowledge about the sustainability performance of current livestock production systems may help to formulate strategies for future systems. Our study provides a systematic overview of differences between conventional and organic livestock production systems on a broad range of sustainability aspects and animal species available in peer-reviewed literature. Systems were compared on economy, productivity, environmental impact, animal welfare and public health. The review was limited to dairy cattle, beef cattle, pigs, broilers and laying hens, and to Europe, North America and New Zealand. Results per indicators are presented as in the articles without performing additional calculations. Out of 4171 initial search hits, 179 articles were analysed. Studies varied widely in indicators, research design, sample size and location and context. Quite some studies used small samples. No study analysed all aspects of sustainability simultaneously. Conventional systems had lower labour requirements per unit product, lower income risk per animal, higher production per animal per time unit, higher reproduction numbers, lower feed conversion ratio, lower land use, generally lower acidification and eutrophication potential per unit product, equal or better udder health for cows and equal or lower microbiological contamination. Organic systems had higher income per animal or full time employee, lower impact on biodiversity, lower eutrophication and acidification potential per unit land, equal or lower likelihood of antibiotic resistance in bacteria and higher beneficial fatty acid levels in cow milk. For most sustainability aspects, sometimes conventional and sometimes organic systems performed better, except for productivity, which was consistently higher in conventional systems. For many aspects and animal species, more data are needed to conclude on a difference between organic and conventional livestock production systems.

Prediction of Bubble Diameter at Detachment from a Wall Orifice in Liquid Cross Flow Under Reduced and Normal Gravity Conditions

NASA Technical Reports Server (NTRS)

Nahra, Henry K.; Kamotani, Y.

2003-01-01

Bubble formation and detachment is an integral part of the two-phase flow science. The objective of the present work is to theoretically investigate the effects of liquid cross-flow velocity, gas flow rate embodied in the momentum flux force, and orifice diameter on bubble formation in a wall-bubble injection configuration. A two-dimensional one-stage theoretical model based on a global force balance on the bubble evolving from a wall orifice in a cross liquid flow is presented in this work. In this model, relevant forces acting on the evolving bubble are expressed in terms of the bubble center of mass coordinates and solved simultaneously. Relevant forces in low gravity included the momentum flux, shear-lift, surface tension, drag and inertia forces. Under normal gravity conditions, the buoyancy force, which is dominant under such conditions, can be added to the force balance. Two detachment criteria were applicable depending on the gas to liquid momentum force ratio. For low ratios, the time when the bubble acceleration in the direction of the detachment angle is greater or equal to zero is calculated from the bubble x and y coordinates. This time is taken as the time at which all the detaching forces that are acting on the bubble are greater or equal to the attaching forces. For high gas to liquid momentum force ratios, the time at which the y coordinate less the bubble radius equals zero is calculated. The bubble diameter is evaluated at this time as the diameter at detachment from the fact that the bubble volume is simply given by the product of the gas flow rate and time elapsed. Comparison of the model s predictions was also made with predictions from a two-dimensional normal gravity model based on Kumar-Kuloor formulation and such a comparison is presented in this work.

Acid Inhibitory Effect of a Combination of Omeprazole and Sodium Bicarbonate (CDFR0209) Compared With Delayed-Release Omeprazole 40 mg Alone in Healthy Adult Male Subjects.

PubMed

Kim, Kyu-Nam; Yang, Sung-Won; Kim, Hyunil; Kwak, Seong Shin; Kim, Young-Sang; Cho, Doo-Yeoun

2018-01-01

CDFR0209, a combination of an immediate-release formulation of omeprazole 40 mg and sodium bicarbonate 1100 mg, has been developed to treat acid-related disorders. We compared the acid inhibitory effects of CDFR0209 and delayed-release omeprazole (omeprazole-DR, Losec 40 mg) after repeated dosing in Helicobacter pylori-negative healthy adult male subjects. In this 2-period crossover study, 30 subjects were randomized to CDFR0209 or omeprazole-DR daily for 7 days. An ambulatory continuous 24-hour intragastric pH recording was performed at baseline and on days 1 and 7 of each administration period. Integrated gastric acidity was calculated from time-weighted average hydrogen ion concentrations at each hour of the 24-hour record. An analysis of variance model was used to test the pharmacodynamic equivalence of CDFR0209 and omeprazole-DR, using the natural logarithmic transformation of the percent decrease from baseline in integrated gastric acidity for the 24-hour interval after the seventh dose of each omeprazole formulation. The geometric least-squares mean ratios (CDFR0209/omeprazole-DR) of the percent decrease from baseline in integrated gastric acidity was 0.98 (90%CI, 0.93-1.07). Both CDFR0209 and omeprazole-DR are equally effective in decreasing integrated gastric acidity at steady state. © 2017, The American College of Clinical Pharmacology.

Evaluation of a Reformulated CHROMagar Candida

PubMed Central

Jabra-Rizk, Mary Ann; Brenner, Troy M.; Romagnoli, Mark; Baqui, A. A. M. A.; Merz, William G.; Falkler, William A.; Meiller, Timothy F.

2001-01-01

CHROMagar Candida is a differential culture medium for the isolation and presumptive identification of clinically important yeasts. Recently the medium was reformulated by Becton Dickinson. This study was designed to evaluate the performance of the new formula of CHROMagar against the original CHROMagar Candida for recovery, growth, and colony color with stock cultures and with direct plating of clinical specimens. A total of 90 stock yeast isolates representing nine yeast species, including Candida dubliniensis, as well as 522 clinical specimens were included in this study. No major differences were noted in growth rate or colony size between the two media for most of the species. However, all 10 Candida albicans isolates evaluated consistently gave a lighter shade of green on the new CHROMagar formulation. In contrast, all 26 C. dubliniensis isolates gave the same typical dark green color on both media. A total of 173 of the 522 clinical specimens were positive for yeast, with eight yeast species recovered. The recovery rates for each species were equivalent on both media, with no consistent species-associated differences in colony size or color. Although both media were comparable in performance, the lighter green colonies of C. albicans isolates on the new CHROMagar made it easier to differentiate between C. albicans and C. dubliniensis isolates. In conclusion, the newly formulated Becton Dickinson CHROMagar Candida medium is as equally suited as a differential medium for the presumptive identification of yeast species and for the detection of multiple yeast species in clinical specimens as the original CHROMagar Candida medium. PMID:11326038

Valorization of Tunisian alfa fibres and sumac tannins for the elaboration of biodegradable insulating panels

NASA Astrophysics Data System (ADS)

Saad, Houda; Charrier, Bertrand; Ayed, Naceur; Charrier-El-Bouhtoury, Fatima

2017-10-01

Alfa leaves are important renewable raw materials in Tunisia where they are used basically in handcrafts and paper industry. Sumac is also an abundant species in Tunisia known for its high tannin content and is basically used in traditional medicine. To valorize these natural resources, we studied, for the first time, the possibility of making insulating panels based on alfa fibres and sumac tannins based adhesive. Firstly, alfa leaves were treated with an alkali solution as it is one of the standard procedures commonly used in the paper industry to extract cellulosic fibres. Mercerization effects were studied by characterizing fibres thermal properties and fibres surface morphology. Secondly, the sumac tannin based resin was formulated and characterized. Finally, the insulating panel was elaborated and characterized by determining its thermal conductivity. The thermal gravimetric analysis results show improvement in the thermal stability of fibres after alkali treatment. Environmental Scanning Electron Microscopy showed changes on treated alfa surface which could promote the fibre-matrix adhesion. The reactivity of sumac tannins to formaldehyde test (Stiasny number) showed the possible use of sumac tannins in wood adhesive formulation. Thermomechanical analysis and strength analysis of sumac tannin/hexamin based resin highlighted acceptable bonding properties. The thermal conductivity measurement showed an average value equal to 0.110 W/m K. Contribution to the topical issue "Materials for Energy harvesting, conversion and storage II (ICOME 2016)", edited by Jean-Michel Nunzi, Rachid Bennacer and Mohammed El Ganaoui

Cationic surfactants-modified natural zeolites: improvement of the excipients functionality.

PubMed

Krajisnik, Danina; Milojević, Maja; Malenović, Anđelija; Daković, Aleksandra; Ibrić, Svetlana; Savić, Snezana; Dondur, Vera; Matijasević, Srđan; Radulović, Aleksandra; Daniels, Rolf; Milić, Jela

2010-10-01

In this study an investigation of cationic surfactants-modified natural zeolites as drug formulation excipient was performed. The aim of this work was to carry out a study of the purified natural zeolitic tuff with high amount of clinoptilolite as a potential carrier for molecules of pharmaceutical interest. Two cationic surfactants (benzalkonium chloride and hexadecyltrimethylammonium bromide) were used for modification of the zeolitic surface in two levels (equal to and twice as external cation-exchange capacity of the zeolitic tuff). Prepared samples were characterized by Fourier transform infrared spectroscopy, thermogravimetric, high-performance liquid chromatography analysis, and powder flow determination. Different surfactant/zeolite composites were used for additional investigation of three model drugs: diclofenac diethylamine, diclofenac sodium, and ibuprofen by means of adsorption isotherm measurements in aqueous solutions. The modified zeolites with two levels of surfactant coverage within the short activation time were prepared. Determination of flow properties showed that modification of zeolitic surface reflected on powder flow characteristics. Investigation of the model drugs adsorption on the obtained composites revealed that a variation between adsorption levels was influenced by the surfactant type and the amount present at the surface of the composites. In vitro release profiles of the drugs from the zeolite-surfactant-drug composites revealed that sustained drug release could be attained over a period of 8 hours. The presented results for drug uptake by surfactant-zeolite composites and the afterward drug release demonstrated the potential use of investigated modified natural zeolite as excipients for advanced excipients in drug formulations.

Formulation of topical bioadhesive gel of aceclofenac using 3-level factorial design.

PubMed

Singh, Sanjay; Parhi, Rabinarayan; Garg, Anuj

2011-01-01

The objective of this work was to develop bioadhesive topical gel of Aceclofenac with the help of response-surface approach. Experiments were performed according to a 3-level factorial design to evaluate the effects of two independent variables [amount of Poloxamer 407 (PL-407 = X1) and hydroxypropylmethyl cellulose K100 M (HPMC = X2)] on the bioadhesive character of gel, rheological property of gel (consistency index), and in-vitro drug release. The best model was selected to fit the data. Mathematical equation was generated by Design Expert® software for the model which assists in determining the effect of independent variables. Response surface plots were also generated by the software for analyzing effect of the independent variables on the response. Quadratic model was found to be the best for all the responses. Both independent variable (X1 and X2) were found to have synergistic effect on bioadhesion (Y1) but the effect of HPMC was more pronounced than PL-407. Consistency index was enhanced by increasing the level of both independent variables. An antagonistic effect of both independent variables was found on cumulative percentage release of drug in 2 (Y3) and 8 h (Y4). Both independent variables approximately equally contributed the antagonistic effect on Y3 whereas antagonistic effect of HPMC was more pronounced than PL-407. The effect of formulation variables on the product characteristics can be easily predicted and precisely interpreted by using a 3-level factorial experimental design and generated quadratic mathematical equations.

Storage effect on viability and biofunctionality of human adipose tissue-derived stromal cells.

PubMed

Falah, Mizied; Rayan, Anwar; Srouji, Samer

2015-09-01

In our recent studies, the transplantation of human adipose tissue-derived stromal cells (ASCs) has shown promise for treatment of diseases related to bone and joint disorders. For the current clinical applications, ASCs were formulated and suspended in PlasmaLyte A supplemented with heparin, glucose and human serum albumin, balanced to pH 7.4 with sodium bicarbonate. This cell solution constitutes 20% of the overall transplanted mixture and is supplemented with hyaluronic acid (60%) and OraGraft particles (20%). We intended to investigate the effect of this transplantation mixture on the viability and biofunctionality of ASCs in bone formation. Freshly harvested cells were resuspended and incubated in the indicated mixture for up to 48 h at 4°C. Cell viability was assessed using trypan blue and AlamarBlue, and cell functionality was determined by quantifying their adhesion rate in vitro and bone formation in an ectopic mouse model. More than 80% of the ASCs stored in the transplantation mixture were viable for up to 24 h. Cell viability beyond 24 h in storage decreased to approximately 50%. In addition, an equal degree of bone formation was observed between the cells transplanted following incubation in transplantation mixture for up to 24 h and zero-time non-incubated cells (control). The viability and functionality of ASCs stored in the presented formulation will make such cell therapy accessible to larger and more remote populations. Copyright © 2015 International Society for Cellular Therapy. Published by Elsevier Inc. All rights reserved.

Framing the ultimatum game: the contribution of simulation.

PubMed

Tomasino, Barbara; Lotto, Lorella; Sarlo, Michela; Civai, Claudia; Rumiati, Rino; Rumiati, Raffaella I

2013-01-01

It has now become widely accepted that economic decisions are influenced by cognitive and emotional processes. In the present study, we aimed at disentangling the neural mechanisms associated with the way in which the information is formulated, i.e., framing effect, in terms of gain or loss, which influences people's decisions. Participants played a fMRI version of the Ultimatum Game (UG) where we manipulated bids through two different frames: the expression "I give you" (gain) focusing on money the respondent would receive if she/he agreed with the proponent, and the expression "I take" (loss) focusing on the money that would be removed from the respondent in the event that she/he accepted the offer. Neuroimaging data revealed a frame by response interaction, showing an increase of neural activity in the right rolandic operculum/insular cortex, the anterior cingulate, among other regions, for accepting the frame "I take" vs. rejecting, as compared to accepting the frame "I give you" vs. rejecting. In addition, the left occipito-temporal junction was activated for "I take" vs. "I give you" for offer 5, corresponding to the equal offer made unpleasant by the presence of the frame "I take," where is the proposer that takes the money. Our data extend the current understanding of the neural substrates of social decision making, by disentangling the structures sensitive to the way in which the information is formulated (i.e., framing effect), in terms of gain or loss.

Attraction of subterranean termites (Isoptera) to carbon dioxide.

PubMed

Bernklau, Elisa Jo; Fromm, Erich A; Judd, Timothy M; Bjostad, Louis B

2005-04-01

Subterranean termites, Reticulitermes spp., were attracted to carbon dioxide (CO2) in laboratory and field tests. In behavioral bioassays, Reticulitermes flavipes (Kollar), Reticulitermes tibialis Banks, and Reticulitermes virginicus Banks were attracted to CO2 concentrations between 5 and 50 mmol/mol. In further bioassays, R. tibialis and R. virginicus were attracted to the headspace from polyisocyanurate construction foam that contained 10-12 mmol/mol CO2. In soil bioassays in the laboratory, more termites foraged in chambers containing CO2-generating formulations than in unbaited control chambers. In field tests, stations containing CO2-generating baits attracted R. tibialis away from wooden fence posts at rangeland sites in Colorado. For all of the CO2 formulations tested, termites foraged in significantly more bait stations at treatment fenceposts than in bait stations at the control fenceposts. By the end of the 8-wk study, the number of bait stations located by termites at treatment fenceposts ranged from 40 to 90%. At control fenceposts, termites foraged in only a single station and the one positive station was not located by termites until week 5 of the study. At treatment fenceposts, termites foraged equally in active stations (containing a CO2-generating bait) and passive stations (with no CO2-generating bait), indicating that bait stations may benefit passively from a proximal CO2 source in the soil. CO2 used as an attractant in current baiting systems could improve their effectiveness by allowing earlier exposure of termites to an insecticide.

Distribution-dependent robust linear optimization with applications to inventory control

PubMed Central

Kang, Seong-Cheol; Brisimi, Theodora S.

2014-01-01

This paper tackles linear programming problems with data uncertainty and applies it to an important inventory control problem. Each element of the constraint matrix is subject to uncertainty and is modeled as a random variable with a bounded support. The classical robust optimization approach to this problem yields a solution with guaranteed feasibility. As this approach tends to be too conservative when applications can tolerate a small chance of infeasibility, one would be interested in obtaining a less conservative solution with a certain probabilistic guarantee of feasibility. A robust formulation in the literature produces such a solution, but it does not use any distributional information on the uncertain data. In this work, we show that the use of distributional information leads to an equally robust solution (i.e., under the same probabilistic guarantee of feasibility) but with a better objective value. In particular, by exploiting distributional information, we establish stronger upper bounds on the constraint violation probability of a solution. These bounds enable us to “inject” less conservatism into the formulation, which in turn yields a more cost-effective solution (by 50% or more in some numerical instances). To illustrate the effectiveness of our methodology, we consider a discrete-time stochastic inventory control problem with certain quality of service constraints. Numerical tests demonstrate that the use of distributional information in the robust optimization of the inventory control problem results in 36%–54% cost savings, compared to the case where such information is not used. PMID:26347579

Analysis of ingredient functionality and formulation optimization of an instant peanut beverage mix.

PubMed

Howard, Brandy M; Hung, Yen-Con; McWatters, S Kay

2010-01-01

Powder for an instant shake-style beverage was created using partially defatted peanut flour (12% fat), granulated sugar, and nonfat dry milk (NFDM). The 3 main components, along with constant amounts of stabilizing gums and anti-caking silica, were mixed together and finely milled in a Super Wing Mill to further reduce the particle sizes. Drinks from each formula variation were prepared and analyzed for viscosity (digital viscometer), color (colorimeter), and separation rate. Each beverage was also analyzed by consumers to determine acceptability of flavor, mouth-feel, and color. Physical test results show that viscosity increased with increasing proportion of peanut flour in the formula, and viscosity decreased with increasing levels of sugar and NFDM. For each formula, the samples at refrigerated temperature (4 degrees C) were less viscous than those at ambient temperatures (23 to 25 degrees C). Color values show that the beverage powder color was mostly influenced by peanut flour percentage, becoming darker with increasing levels of peanut flour. Prepared beverage color was influenced by both NFDM and peanut flour percentage; lightness increased with increasing NFDM percentage and decreased with increasing peanut flour percentage. Separation rates were most affected by the proportion of NFDM in the formula; higher levels decreased the rate of separation. Refrigeration slowed the rate of separation in all samples. Response surface analysis of consumer test data showed that the most acceptable formulation for the peanut beverage included approximately equal amounts of peanut flour, sugar, and NFDM.

An energy-based equilibrium contact angle boundary condition on jagged surfaces for phase-field methods.

PubMed

Frank, Florian; Liu, Chen; Scanziani, Alessio; Alpak, Faruk O; Riviere, Beatrice

2018-08-01

We consider an energy-based boundary condition to impose an equilibrium wetting angle for the Cahn-Hilliard-Navier-Stokes phase-field model on voxel-set-type computational domains. These domains typically stem from μCT (micro computed tomography) imaging of porous rock and approximate a (on μm scale) smooth domain with a certain resolution. Planar surfaces that are perpendicular to the main axes are naturally approximated by a layer of voxels. However, planar surfaces in any other directions and curved surfaces yield a jagged/topologically rough surface approximation by voxels. For the standard Cahn-Hilliard formulation, where the contact angle between the diffuse interface and the domain boundary (fluid-solid interface/wall) is 90°, jagged surfaces have no impact on the contact angle. However, a prescribed contact angle smaller or larger than 90° on jagged voxel surfaces is amplified. As a remedy, we propose the introduction of surface energy correction factors for each fluid-solid voxel face that counterbalance the difference of the voxel-set surface area with the underlying smooth one. The discretization of the model equations is performed with the discontinuous Galerkin method. However, the presented semi-analytical approach of correcting the surface energy is equally applicable to other direct numerical methods such as finite elements, finite volumes, or finite differences, since the correction factors appear in the strong formulation of the model. Copyright © 2018 Elsevier Inc. All rights reserved.

Determination of optimum values for maximizing the profit in bread production: Daily bakery Sdn Bhd

NASA Astrophysics Data System (ADS)

Muda, Nora; Sim, Raymond

2015-02-01

An integer programming problem is a mathematical optimization or feasibility program in which some or all of the variables are restricted to be integers. In many settings the term refers to integer linear programming (ILP), in which the objective function and the constraints (other than the integer constraints) are linear. An ILP has many applications in industrial production, including job-shop modelling. A possible objective is to maximize the total production, without exceeding the available resources. In some cases, this can be expressed in terms of a linear program, but variables must be constrained to be integer. It concerned with the optimization of a linear function while satisfying a set of linear equality and inequality constraints and restrictions. It has been used to solve optimization problem in many industries area such as banking, nutrition, agriculture, and bakery and so on. The main purpose of this study is to formulate the best combination of all ingredients in producing different type of bread in Daily Bakery in order to gain maximum profit. This study also focuses on the sensitivity analysis due to changing of the profit and the cost of each ingredient. The optimum result obtained from QM software is RM 65,377.29 per day. This study will be benefited for Daily Bakery and also other similar industries. By formulating a combination of all ingredients make up, they can easily know their total profit in producing bread everyday.

Efficacy of a novel formulation of metaflumizone plus amitraz for the treatment of sarcoptic mange in dogs.

PubMed

Fourie, L J; Kok, D J; du Plessis, A; Rugg, D

2007-12-15

A novel spot-on formulation containing metaflumizone plus amitraz (ProMeris/ProMeris Duo for Dogs, Fort Dodge Animal Health, Overland Park, KS) was evaluated for efficacy against sarcoptic mange mites in naturally infested dogs. Sixteen dogs were allocated to two equal groups and were housed individually. Eight of the dogs were treated topically with metaflumizone plus amitraz at the proposed minimum dose rate (20mg/kg of each of metaflumizone and amitraz, at a dose volume of 0.133ml/kg) on Days 0 and 28. The other eight were treated with metaflumizone plus amitraz at the proposed minimum dose rate on Days 0, 14, 28 and 42. To enumerate Sarcoptes scabiei mites, skin scrapings were taken on each of Days 2, 14, 28, 42 and 56. Clinical signs of mange and the extent of sarcoptic lesions were evaluated on each dog when scrapings were made. Evaluation of the efficacy of the treatment was based on the absence of mites supported by the absence of clinical signs associated with canine sarcoptic mange. Treatment with metaflumizone plus amitraz at the minimum proposed dose rate at monthly (two treatments) or two-weekly (four treatments) intervals resulted in a rapid reduction of mites and improved clinical signs. The overall cure rates at Day 56, based on zero mite counts and/or resolution of clinical signs were 75% and 83% of dogs for the monthly and two-weekly regimens, respectively.

Characterization of seismic hazard and structural response by energy flux

USGS Publications Warehouse

Afak, E.

2000-01-01

Seismic safety of structures depends on the structure's ability to absorb the seismic energy that is transmitted from ground to structure. One parameter that can be used to characterize seismic energy is the energy flux. Energy flux is defined as the amount of energy transmitted per unit time through a cross-section of a medium, and is equal to kinetic energy multiplied by the propagation velocity of seismic waves. The peak or the integral of energy flux can be used to characterize ground motions. By definition, energy flux automatically accounts for site amplification. Energy flux in a structure can be studied by formulating the problem as a wave propagation problem. For buildings founded on layered soil media and subjected to vertically incident plane shear waves, energy flux equations are derived by modeling the buildings as an extension of the layered soil medium, and considering each story as another layer. The propagation of energy flux in the layers is described in terms of the upgoing and downgoing energy flux in each layer, and the energy reflection and transmission coefficients at each interface. The formulation results in a pair of simple finite-difference equations for each layer, which can be solved recursively starting from the bedrock. The upgoing and downgoing energy flux in the layers allows calculation of the energy demand and energy dissipation in each layer. The methodology is applicable to linear, as well as nonlinear structures. ?? 2000 Published by Elsevier Science Ltd.

Estimating kinetic mechanisms with prior knowledge I: Linear parameter constraints.

PubMed

Salari, Autoosa; Navarro, Marco A; Milescu, Mirela; Milescu, Lorin S

2018-02-05

To understand how ion channels and other proteins function at the molecular and cellular levels, one must decrypt their kinetic mechanisms. Sophisticated algorithms have been developed that can be used to extract kinetic parameters from a variety of experimental data types. However, formulating models that not only explain new data, but are also consistent with existing knowledge, remains a challenge. Here, we present a two-part study describing a mathematical and computational formalism that can be used to enforce prior knowledge into the model using constraints. In this first part, we focus on constraints that enforce explicit linear relationships involving rate constants or other model parameters. We develop a simple, linear algebra-based transformation that can be applied to enforce many types of model properties and assumptions, such as microscopic reversibility, allosteric gating, and equality and inequality parameter relationships. This transformation converts the set of linearly interdependent model parameters into a reduced set of independent parameters, which can be passed to an automated search engine for model optimization. In the companion article, we introduce a complementary method that can be used to enforce arbitrary parameter relationships and any constraints that quantify the behavior of the model under certain conditions. The procedures described in this study can, in principle, be coupled to any of the existing methods for solving molecular kinetics for ion channels or other proteins. These concepts can be used not only to enforce existing knowledge but also to formulate and test new hypotheses. © 2018 Salari et al.

A formal model of interpersonal inference

PubMed Central

Moutoussis, Michael; Trujillo-Barreto, Nelson J.; El-Deredy, Wael; Dolan, Raymond J.; Friston, Karl J.

2014-01-01

Introduction: We propose that active Bayesian inference—a general framework for decision-making—can equally be applied to interpersonal exchanges. Social cognition, however, entails special challenges. We address these challenges through a novel formulation of a formal model and demonstrate its psychological significance. Method: We review relevant literature, especially with regards to interpersonal representations, formulate a mathematical model and present a simulation study. The model accommodates normative models from utility theory and places them within the broader setting of Bayesian inference. Crucially, we endow people's prior beliefs, into which utilities are absorbed, with preferences of self and others. The simulation illustrates the model's dynamics and furnishes elementary predictions of the theory. Results: (1) Because beliefs about self and others inform both the desirability and plausibility of outcomes, in this framework interpersonal representations become beliefs that have to be actively inferred. This inference, akin to “mentalizing” in the psychological literature, is based upon the outcomes of interpersonal exchanges. (2) We show how some well-known social-psychological phenomena (e.g., self-serving biases) can be explained in terms of active interpersonal inference. (3) Mentalizing naturally entails Bayesian updating of how people value social outcomes. Crucially this includes inference about one's own qualities and preferences. Conclusion: We inaugurate a Bayes optimal framework for modeling intersubject variability in mentalizing during interpersonal exchanges. Here, interpersonal representations are endowed with explicit functional and affective properties. We suggest the active inference framework lends itself to the study of psychiatric conditions where mentalizing is distorted. PMID:24723872

Limit analysis and homogenization of porous materials with Mohr-Coulomb matrix. Part I: Theoretical formulation

NASA Astrophysics Data System (ADS)

Anoukou, K.; Pastor, F.; Dufrenoy, P.; Kondo, D.

2016-06-01

The present two-part study aims at investigating the specific effects of Mohr-Coulomb matrix on the strength of ductile porous materials by using a kinematic limit analysis approach. While in the Part II, static and kinematic bounds are numerically derived and used for validation purpose, the present Part I focuses on the theoretical formulation of a macroscopic strength criterion for porous Mohr-Coulomb materials. To this end, we consider a hollow sphere model with a rigid perfectly plastic Mohr-Coulomb matrix, subjected to axisymmetric uniform strain rate boundary conditions. Taking advantage of an appropriate family of three-parameter trial velocity fields accounting for the specific plastic deformation mechanisms of the Mohr-Coulomb matrix, we then provide a solution of the constrained minimization problem required for the determination of the macroscopic dissipation function. The macroscopic strength criterion is then obtained by means of the Lagrangian method combined with Karush-Kuhn-Tucker conditions. After a careful analysis and discussion of the plastic admissibility condition associated to the Mohr-Coulomb criterion, the above procedure leads to a parametric closed-form expression of the macroscopic strength criterion. The latter explicitly shows a dependence on the three stress invariants. In the special case of a friction angle equal to zero, the established criterion reduced to recently available results for porous Tresca materials. Finally, both effects of matrix friction angle and porosity are briefly illustrated and, for completeness, the macroscopic plastic flow rule and the voids evolution law are fully furnished.

Reproducing tailing in breakthrough curves: Are statistical models equally representative and predictive?

NASA Astrophysics Data System (ADS)

Pedretti, Daniele; Bianchi, Marco

2018-03-01

Breakthrough curves (BTCs) observed during tracer tests in highly heterogeneous aquifers display strong tailing. Power laws are popular models for both the empirical fitting of these curves, and the prediction of transport using upscaling models based on best-fitted estimated parameters (e.g. the power law slope or exponent). The predictive capacity of power law based upscaling models can be however questioned due to the difficulties to link model parameters with the aquifers' physical properties. This work analyzes two aspects that can limit the use of power laws as effective predictive tools: (a) the implication of statistical subsampling, which often renders power laws undistinguishable from other heavily tailed distributions, such as the logarithmic (LOG); (b) the difficulties to reconcile fitting parameters obtained from models with different formulations, such as the presence of a late-time cutoff in the power law model. Two rigorous and systematic stochastic analyses, one based on benchmark distributions and the other on BTCs obtained from transport simulations, are considered. It is found that a power law model without cutoff (PL) results in best-fitted exponents (αPL) falling in the range of typical experimental values reported in the literature (1.5 < αPL < 4). The PL exponent tends to lower values as the tailing becomes heavier. Strong fluctuations occur when the number of samples is limited, due to the effects of subsampling. On the other hand, when the power law model embeds a cutoff (PLCO), the best-fitted exponent (αCO) is insensitive to the degree of tailing and to the effects of subsampling and tends to a constant αCO ≈ 1. In the PLCO model, the cutoff rate (λ) is the parameter that fully reproduces the persistence of the tailing and is shown to be inversely correlated to the LOG scale parameter (i.e. with the skewness of the distribution). The theoretical results are consistent with the fitting analysis of a tracer test performed during the MADE-5 experiment. It is shown that a simple mechanistic upscaling model based on the PLCO formulation is able to predict the ensemble of BTCs from the stochastic transport simulations without the need of any fitted parameters. The model embeds the constant αCO = 1 and relies on a stratified description of the transport mechanisms to estimate λ. The PL fails to reproduce the ensemble of BTCs at late time, while the LOG model provides consistent results as the PLCO model, however without a clear mechanistic link between physical properties and model parameters. It is concluded that, while all parametric models may work equally well (or equally wrong) for the empirical fitting of the experimental BTCs tails due to the effects of subsampling, for predictive purposes this is not true. A careful selection of the proper heavily tailed models and corresponding parameters is required to ensure physically-based transport predictions.

Applying Biopharmaceutical Classification System (BCS) Criteria to Predict Oral Absorption of Drugs in Dogs: Challenges and Pitfalls.

PubMed

Papich, Mark G; Martinez, Marilyn N

2015-07-01

The Biopharmaceutical Classification System (BCS) has been a prognostic tool for assessing the potential effects of formulation on the human drug oral bioavailability. When used in conjunction with in vitro dissolution tests, the BCS can support the prediction of in vivo product performance and the development of mechanistic models that support formulation assessments through the generation of "what if" scenarios. To date, the applicability of existing human BCS criteria has not been evaluated in dogs, thereby limiting its use in canine drug development. Therefore, we examined 50 drugs for which absolute bioavailability (F) was available both in dogs and humans. The drugs were also evaluated for any potential association between solubility (calculated from the dose number, Do) or lipophilicity (LogP) and F in dogs. In humans, solubility is determined in 250 mL of fluid. However, the appropriate volume for classifying drug solubility in dogs has not been established. In this analysis, the estimated volume of a water flush administered to fasted dogs (6 mL) and a volume of 250 mL scaled to a Beagle dog (35 mL) were examined. In addition, in humans, a Do value greater than 1.0 is used to define a compound as highly soluble and a LogP value greater than 1.72 as high permeability. These same criteria were applied for defining highly soluble and highly permeable in dogs. Whether using 35 or 6 mL to determine Do, the canine solubility classification remained unchanged for all but seven compounds. There were no clear associations between a drug's F in dogs and humans or between the canine value of F and either its human BCS classification, its LogP value, or the canine Do estimate. There was a tendency for those drugs with canine values of F equal to or greater than 80% to have LogP values equal to or greater than 1.0. Exceptions to this observation tended to be those compounds known to be absorbed via mechanisms other than passive diffusion (e.g., via transporters or paracellular transporters). Although there are limitations to the approach used in this study, the results of our assessment strongly suggest that the human BCS classification system requires substantial modification before it can be reliably applied to dogs.

Traffic-engineering-aware shortest-path routing and its application in IP-over-WDM networks [Invited

NASA Astrophysics Data System (ADS)

Lee, Youngseok; Mukherjee, Biswanath

2004-03-01

Single shortest-path routing is known to perform poorly for Internet traffic engineering (TE) where the typical optimization objective is to minimize the maximum link load. Splitting traffic uniformly over equal-cost multiple shortest paths in open shortest path first and intermediate system-intermediate system protocols does not always minimize the maximum link load when multiple paths are not carefully selected for the global traffic demand matrix. However, a TE-aware shortest path among all the equal-cost multiple shortest paths between each ingress-egress pair can be selected such that the maximum link load is significantly reduced. IP routers can use the globally optimal TE-aware shortest path without any change to existing routing protocols and without any serious configuration overhead. While calculating TE-aware shortest paths, the destination-based forwarding constraint at a node should be satisfied, because an IP router will forward a packet to the next hop toward the destination by looking up the destination prefix. We present a mathematical problem formulation for finding a set of TE-aware shortest paths for the given network as an integer linear program, and we propose a simple heuristic for solving large instances of the problem. Then we explore the usage of our proposed algorithm for the integrated TE method in IP-over-WDM networks. The proposed algorithm is evaluated through simulations in IP networks as well as in IP-over-WDM networks.

Temperature-viscosity models reassessed.

PubMed

Peleg, Micha

2017-05-04

The temperature effect on viscosity of liquid and semi-liquid foods has been traditionally described by the Arrhenius equation, a few other mathematical models, and more recently by the WLF and VTF (or VFT) equations. The essence of the Arrhenius equation is that the viscosity is proportional to the absolute temperature's reciprocal and governed by a single parameter, namely, the energy of activation. However, if the absolute temperature in K in the Arrhenius equation is replaced by T + b where both T and the adjustable b are in °C, the result is a two-parameter model, which has superior fit to experimental viscosity-temperature data. This modified version of the Arrhenius equation is also mathematically equal to the WLF and VTF equations, which are known to be equal to each other. Thus, despite their dissimilar appearances all three equations are essentially the same model, and when used to fit experimental temperature-viscosity data render exactly the same very high regression coefficient. It is shown that three new hybrid two-parameter mathematical models, whose formulation bears little resemblance to any of the conventional models, can also have excellent fit with r 2 ∼ 1. This is demonstrated by comparing the various models' regression coefficients to published viscosity-temperature relationships of 40% sucrose solution, soybean oil, and 70°Bx pear juice concentrate at different temperature ranges. Also compared are reconstructed temperature-viscosity curves using parameters calculated directly from 2 or 3 data points and fitted curves obtained by nonlinear regression using a larger number of experimental viscosity measurements.

The effect of coupled transport phenomena in the Opalinus Clay and implications for radionuclide transport

NASA Astrophysics Data System (ADS)

Soler, Josep M.

2001-12-01

In this study, the potential effects of coupled transport phenomena on radionuclide transport in the vicinity of a repository for vitrified high-level radioactive waste (HLW) and spent nuclear fuel (SF) hosted by the Opalinus Clay in Switzerland, at times equal to or greater than the expected lifetime of the waste canisters (about 1000 years), are addressed. The solute fluxes associated with advection, chemical diffusion, thermal and chemical osmosis, hyperfiltration and thermal diffusion have been incorporated into a simple one-dimensional transport equation. The analytical solution of this equation, with appropriate parameters, shows that thermal osmosis is the only coupled transport mechanism that could, on its own, have a strong effect on repository performance. Based on the results from the analytical model, two-dimensional finite-difference models incorporating advection and thermal osmosis, and taking conservation of fluid mass into account, have been formulated. The results show that, under the conditions in the vicinity of the repository at the time scales of interest, and due to the constraints imposed by conservation of fluid mass, the advective component of flow will oppose and cancel the thermal-osmotic component. The overall conclusion is that coupled phenomena will only have a very minor impact on radionuclide transport in the Opalinus Clay, in terms of fluid and solute fluxes, at least under the conditions prevailing at times equal to or greater than the expected lifetime of the waste canisters (about 1000 years).

Insights into the role of protein molecule size and structure on interfacial properties using designed sequences

PubMed Central

Dwyer, Mirjana Dimitrijev; He, Lizhong; James, Michael; Nelson, Andrew; Middelberg, Anton P. J.

2013-01-01

Mixtures of a large, structured protein with a smaller, unstructured component are inherently complex and hard to characterize at interfaces, leading to difficulties in understanding their interfacial behaviours and, therefore, formulation optimization. Here, we investigated interfacial properties of such a mixed system. Simplicity was achieved using designed sequences in which chemical differences had been eliminated to isolate the effect of molecular size and structure, namely a short unstructured peptide (DAMP1) and its longer structured protein concatamer (DAMP4). Interfacial tension measurements suggested that the size and bulk structuring of the larger molecule led to much slower adsorption kinetics. Neutron reflectometry at equilibrium revealed that both molecules adsorbed as a monolayer to the air–water interface (indicating unfolding of DAMP4 to give a chain of four connected DAMP1 molecules), with a concentration ratio equal to that in the bulk. This suggests the overall free energy of adsorption is equal despite differences in size and bulk structure. At small interfacial extensional strains, only molecule packing influenced the stress response. At larger strains, the effect of size became apparent, with DAMP4 registering a higher stress response and interfacial elasticity. When both components were present at the interface, most stress-dissipating movement was achieved by DAMP1. This work thus provides insights into the role of proteins' molecular size and structure on their interfacial properties, and the designed sequences introduced here can serve as effective tools for interfacial studies of proteins and polymers. PMID:23303222

On the Possibility of Ill-Conditioned Covariance Matrices in the First-Order Two-Step Estimator

NASA Technical Reports Server (NTRS)

Garrison, James L.; Axelrod, Penina; Kasdin, N. Jeremy

1997-01-01

The first-order two-step nonlinear estimator, when applied to a problem of orbital navigation, is found to occasionally produce first step covariance matrices with very low eigenvalues at certain trajectory points. This anomaly is the result of the linear approximation to the first step covariance propagation. The study of this anomaly begins with expressing the propagation of the first and second step covariance matrices in terms of a single matrix. This matrix is shown to have a rank equal to the difference between the number of first step states and the number of second step states. Furthermore, under some simplifying assumptions, it is found that the basis of the column space of this matrix remains fixed once the filter has removed the large initial state error. A test matrix containing the basis of this column space and the partial derivative matrix relating first and second step states is derived. This square test matrix, which has dimensions equal to the number of first step states, numerically drops rank at the same locations that the first step covariance does. It is formulated in terms of a set of constant vectors (the basis) and a matrix which can be computed from a reference trajectory (the partial derivative matrix). A simple example problem involving dynamics which are described by two states and a range measurement illustrate the cause of this anomaly and the application of the aforementioned numerical test in more detail.

Quantum fluctuation theorems and generalized measurements during the force protocol.

PubMed

Watanabe, Gentaro; Venkatesh, B Prasanna; Talkner, Peter; Campisi, Michele; Hänggi, Peter

2014-03-01

Generalized measurements of an observable performed on a quantum system during a force protocol are investigated and conditions that guarantee the validity of the Jarzynski equality and the Crooks relation are formulated. In agreement with previous studies by M. Campisi, P. Talkner, and P. Hänggi [Phys. Rev. Lett. 105, 140601 (2010); Phys. Rev. E 83, 041114 (2011)], we find that these fluctuation relations are satisfied for projective measurements; however, for generalized measurements special conditions on the operators determining the measurements need to be met. For the Jarzynski equality to hold, the measurement operators of the forward protocol must be normalized in a particular way. The Crooks relation additionally entails that the backward and forward measurement operators depend on each other. Yet, quite some freedom is left as to how the two sets of operators are interrelated. This ambiguity is removed if one considers selective measurements, which are specified by a joint probability density function of work and measurement results of the considered observable. We find that the respective forward and backward joint probabilities satisfy the Crooks relation only if the measurement operators of the forward and backward protocols are the time-reversed adjoints of each other. In this case, the work probability density function conditioned on the measurement result satisfies a modified Crooks relation. The modification appears as a protocol-dependent factor that can be expressed by the information gained by the measurements during the forward and backward protocols. Finally, detailed fluctuation theorems with an arbitrary number of intervening measurements are obtained.

Estimation of the chemical rank for the three-way data: a principal norm vector orthogonal projection approach.

PubMed

Hong-Ping, Xie; Jian-Hui, Jiang; Guo-Li, Shen; Ru-Qin, Yu

2002-01-01

A new approach for estimating the chemical rank of the three-way array called the principal norm vector orthogonal projection method has been proposed. The method is based on the fact that the chemical rank of the three-way data array is equal to one of the column space of the unfolded matrix along the spectral or chromatographic mode. A vector with maximum Frobenius norm is selected among all the column vectors of the unfolded matrix as the principal norm vector (PNV). A transformation is conducted for the column vectors with an orthogonal projection matrix formulated by PNV. The mathematical rank of the column space of the residual matrix thus obtained should decrease by one. Such orthogonal projection is carried out repeatedly till the contribution of chemical species to the signal data is all deleted. At this time the decrease of the mathematical rank would equal that of the chemical rank, and the remaining residual subspace would entirely be due to the noise contribution. The chemical rank can be estimated easily by using an F-test. The method has been used successfully to the simulated HPLC-DAD type three-way data array and two real excitation-emission fluorescence data sets of amino acid mixtures and dye mixtures. The simulation with added relatively high level noise shows that the method is robust in resisting the heteroscedastic noise. The proposed algorithm is simple and easy to program with quite light computational burden.

The warm and cold neutral phase in the local interstellar medium at absolute value of B greater than or equal to 10 deg

NASA Astrophysics Data System (ADS)

Poppel, W. G. L.; Marronetti, P.; Benaglia, P.

1994-07-01

We made a systematic separation of both the neutral phases using the atlases of 21-cm profiles of Heiles & Habing (1974) and Colomb et al. (1980), complemented with other data. First, we fitted the emission of the warm neutral medium (WNM) by means of a broad Gaussian curve (velocity dispersion sigma approximately 10-14 km/s). We derived maps of the column densities NWH and the radial velocities VW of the WNM. Its overall distribution appears to be very inhomogeneous with a large hole in the range b greater than or equal to +50 deg. However, if the hole is excluded, the mean latitude-profiles admit a rough cosec absolute value of b-fit common to both hemispheres. A kinematical analysis of VW for the range 10 deg less than or equal to absolute value of b less than or equal to 40 deg indicates a mean differential rotation with a small nodal deviation. At absolute value of b greater than 50 deg VW is negative, with larger values and discontinuities in the north. On the mean, sigma increases for absolute value of b decreasing, as is expected from differential rotation. From a statistical study of the peaks of the residual profiles we derived some characteristics of the cold neutral medium (CNM). The latter is generally characterized by a single component of sigma approximately 2-6 km/s. Additionally we derived the sky-distribution of the column densities NCH and the radial velocities VC of the CNM within bins of 1.2 deg sec b x 1 deg in l, b. Furthermore, we focused on the characteristics of Linblad's feature A of cool gas by considering the narrow ridge of local H I, which appears in the b-V contour maps at fixed l (e.g. Schoeber 1976). The ridge appears to be the main component of the CNM. We suggest a scenario for the formulation and evolution of the Gould belt system of stars and gas on the basis of an explosive event within a shingle of cold dense gas tilted to the galactic plane. The scenario appears to be consistent with the results found for both the neutral phases, as well as with Danly's (1989) optical and UV observations of interstellar cool gas in the lower halo.

Stability of amlodipine besylate in two liquid dosage forms.

PubMed

Nahata, M C; Morosco, R S; Hipple, T F

1999-01-01

To determine the stability of amlodipine besylate in two liquid dosage forms under refrigeration and at room temperature. Commercially available amlodipine tablets (Norvasc-Pfizer) were used to prepare two suspensions: one in extemporaneously prepared 1% methylcellulose in syrup (1:1), and another in equal volumes of commercially available OraPlus/OraSweet. Each suspension containing amlodipine 1 mg/mL was stored in 10 plastic prescription bottles; 5 were stored at 4 degrees C and 5 at 25 degrees C. Samples were collected immediately after preparation (day 0) and on days 7, 14, 28, 42, 56, 70, and 91. Amlodipine concentration was measured by stability-indicating HPLC method (n = 15). Research laboratory at Children's Hospital. Physical and chemical stability (> 90% of the initial concentration) of amlodipine in the two extemporaneously prepared suspensions during storage in plastic prescription bottles at 4 degrees C and 25 degrees C. Observed mean concentrations exceeded 90% of the initial concentrations in both suspensions for 91 days at 4 degrees C and 56 days at 25 degrees C. No noticeable change in physical appearance or odor was observed; pH changed slightly in the methylcellulose-containing formulation stored at 25 degrees C. Amlodipine was stable in two suspensions when stored in plastic prescription bottles for 91 days at 4 degrees C or 56 days at 25 degrees C. These formulations may be considered for pediatric or elderly patients who are unable to swallow tablets. The liquid dosage form would also permit accurate administration of amlodipine doses to infants and young children based on their body weight.

Lipid globule size in total nutrient admixtures prepared in three-chamber plastic bags.

PubMed

Driscoll, David F; Thoma, Andrea; Franke, Rolf; Klütsch, Karsten; Nehne, Jörg; Bistrian, Bruce R

2009-04-01

The stability of injectable lipid emulsions in three-chamber plastic (3CP) bags, applying the globule-size limits established by United States Pharmacopeia ( USP ) chapter 729, was studied. A total of five premixed total nutrient admixture (TNA) products packaged in 3CP bags from two different lipid manufacturers containing either 20% soybean oil or a mixture of soybean oil and medium-chain-triglyceride oil as injectable lipid emulsions were tested. Two low-osmolarity 3CP bags and three high-osmolarity 3CP bags were studied. All products were tested with the addition of trace elements and multivitamins. All additive conditions (with and without electrolytes) were tested in triplicate at time 0 (immediately after mixing) and at 6, 24, 30, and 48 hours after mixing; the bags were stored at 24-26 degrees C. All additives were equally distributed in each bag for comparative testing, applying both globule sizing methods outlined in USP chapter 729. Of the bags tested, all bags from one manufacturer were coarse emulsions, showing signs of significant growth in the large-diameter tail when mixed as a TNA formulation and failing the limits set by method II of USP chapter 729 from the outset and throughout the study, while the bags from the other manufacturer were fine emulsions and met these limits. Of the bags that failed, significant instability was noted in one series containing additional electrolytes. Injectable lipid emulsions provided in 3CP bags that did not meet the globule-size limits of USP chapter 729 produced coarser TNA formulations than emulsions that met the USP limits.

Phytotoxicity of vulpia residues: III. Biological activity of identified allelochemicals from Vulpia myuros.

PubMed

An, M; Pratley, J E; Haig, T

2001-02-01

Twenty compounds identified in vulpia (Vulpia myuros) residues as allelochemicals were individually and collectively tested for biological activity. Each exhibited characteristic allelochemical behavior toward the test plant, i.e., inhibition at high concentrations and stimulation or no effect at low concentrations, but individual activities varied. Allelopathins present in large quantities, such as syringic, vanillic, and succinic acids, possessed low activity, while those present in small quantities, such as catechol and hydrocinnamic acid, possessed strong inhibitory activity. The concept of a phytotoxic strength index was developed for quantifying the biological properties of each individual allelopathin in a concise, comprehensive, and meaningful format. The individual contribution of each allelopathin, assessed by comparing the phytotoxic strength index to the overall toxicity of vulpia residues, was variable according to structure and was influenced by its relative proportion in the residue. The majority of compounds possessed low or medium biological activity and contributed most of the vulpia phytotoxicity, while compounds with high biological activity were in the minority and only present at low concentration. Artificial mixtures of these pure allelochemicals also produced phytotoxicity. There were additive/synergistic effects evident in the properties of these mixtures. One such mixture, formulated from allelochemicals found in the same proportions as occur in vulpia extract, produced stronger activity than another formulated from the same set of compounds but in equal proportions. These results suggest that the exploration of the relative composition of a cluster of allelopathins may be more important than simply focusing on the identification of one or two compounds with strong biological activity and that synergism is fundamental to the understanding of allelopathy.

Reduction of systemic exposure and toxicity of cisplatin by encapsulation in poly-lactide-co-glycolide.

PubMed

Verrijk, R; Smolders, I J; Bosnie, N; Begg, A C

1992-12-01

The tissue distribution and normal tissue toxicity of cisplatin (cDDP) administered as poly-lactide-co-glycolide (PLAGA) microspheres, developed for loco-regional administration of cDDP to the liver, were studied in Wag/Rij rats. Venoportal administration of this formulation resulted in a reduction in total systemic and renal toxicity, which correlated with a decrease in normal tissue exposure to cDDP while maintaining high liver platinum levels. Liver-to-kidney platinum level ratios were 28 times higher after 4 h and 19 times higher after 24 h with PLAGA-cDDP microspheres than with free cDDP. Liver-to-blood platinum ratios at these times were 38 times and 36 times higher using PLAGA-cDDP. In a CC531 colon carcinoma liver micrometastases model, cytotoxicity of microsphere-released cDDP was confirmed in vivo by equal inhibition of tumor growth by PLAGA-cDDP and free cDDP over a period of 26 days. Free cDDP, however, caused significantly more histological renal damage and total body weight loss. The results were supported by the finding of higher plasma creatinine and urea concentrations 26 days after administration of free cDDP. Kidney platinum levels were 7 times lower when PLAGA-cDDP was used. These findings indicate a sparing effect on normal tissues when cDDP is targeted to the liver by formulation in PLAGA. PLAGA-cDDP microspheres may, therefore, be a useful and effective addition to current techniques of loco-regional chemotherapy for disseminated hepatic tumors.

A two-stage extraction procedure for insensitive munition (IM) explosive compounds in soils.

PubMed

Felt, Deborah; Gurtowski, Luke; Nestler, Catherine C; Johnson, Jared; Larson, Steven

2016-12-01

The Department of Defense (DoD) is developing a new category of insensitive munitions (IMs) that are more resistant to detonation or promulgation from external stimuli than traditional munition formulations. The new explosive constituent compounds are 2,4-dinitroanisole (DNAN), nitroguanidine (NQ), and nitrotriazolone (NTO). The production and use of IM formulations may result in interaction of IM component compounds with soil. The chemical properties of these IM compounds present unique challenges for extraction from environmental matrices such as soil. A two-stage extraction procedure was developed and tested using several soil types amended with known concentrations of IM compounds. This procedure incorporates both an acidified phase and an organic phase to account for the chemical properties of the IM compounds. The method detection limits (MDLs) for all IM compounds in all soil types were <5 mg/kg and met non-regulatory risk-based Regional Screening Level (RSL) criteria for soil proposed by the U.S. Army Public Health Center. At defined environmentally relevant concentrations, the average recovery of each IM compound in each soil type was consistent and greater than 85%. The two-stage extraction method decreased the influence of soil composition on IM compound recovery. UV analysis of NTO established an isosbestic point based on varied pH at a detection wavelength of 341 nm. The two-stage soil extraction method is equally effective for traditional munition compounds, a potentially important point when examining soils exposed to both traditional and insensitive munitions. Copyright © 2016 Elsevier Ltd. All rights reserved.

Quality in the provision of headache care. 2: defining quality and its indicators.

PubMed

Peters, Michele; Jenkinson, Crispin; Perera, Suraj; Loder, Elizabeth; Jensen, Rigmor; Katsarava, Zaza; Gil Gouveia, Raquel; Broner, Susan; Steiner, Timothy

2012-08-01

The objective of this study was to define "quality" of headache care, and develop indicators that are applicable in different settings and cultures and to all types of headache. No definition of quality of headache care has been formulated. Two sets of quality indicators, proposed in the US and UK, are limited to their localities and/or specific to migraine and their development received no input from people with headache. We first undertook a literature review. Then we conducted a series of focus-group consultations with key stakeholders (doctors, nurses and patients) in headache care. From the findings we proposed a large number of putative quality indicators, and refined these and reduced their number in consultations with larger international groups of stakeholder representatives. We formulated a definition of quality from the quality indicators. Five main themes were identified: (1) headache services; (2) health professionals; (3) patients; (4) financial resources; (5) political agenda and legislation. An initial list of 160 putative quality indicators in 14 domains was reduced to 30 indicators in 9 domains. These gave rise to the following multidimensional definition of quality of headache care: "Good-quality headache care achieves accurate diagnosis and individualized management, has appropriate referral pathways, educates patients about their headaches and their management, is convenient and comfortable, satisfies patients, is efficient and equitable, assesses outcomes and is safe." Quality in headache care is multidimensional and resides in nine essential domains that are of equal importance. The indicators are currently being tested for feasibility of use in clinical settings.

Which influenza vaccine formulation should be used in Kenya? A comparison of influenza isolates from Kenya to vaccine strains, 2007-2013.

PubMed

Waiboci, Lilian W; Mott, Joshua A; Kikwai, Gilbert; Arunga, Geoffrey; Xu, Xiyan; Mayieka, Lilian; Emukule, Gideon O; Muthoka, Phillip; Njenga, M Kariuki; Fields, Barry S; Katz, Mark A

2016-05-17

Every year the World Health Organization (WHO) recommends which influenza virus strains should be included in a northern hemisphere (NH) and a southern hemisphere (SH) influenza vaccine. To determine the best vaccine formulation for Kenya, we compared influenza viruses collected in Kenya from April 2007 to May 2013 to WHO vaccine strains. We collected nasopharyngeal and oropharyngeal (NP/OP) specimens from patients with respiratory illness, tested them for influenza, isolated influenza viruses from a proportion of positive specimens, tested the isolates for antigenic relatedness to vaccine strains, and determined the percentage match between circulating viruses and SH or NH influenza vaccine composition and schedule. During the six years, 7.336 of the 60,072 (12.2%) NP/OP specimens we collected were positive for influenza: 30,167 specimens were collected during the SH seasons and 3717 (12.3%) were positive for influenza; 2903 (78.1%) influenza A, 902 (24.2%) influenza B, and 88 (2.4%) influenza A and B positive specimens. We collected 30,131 specimens during the NH seasons and 3978 (13.2%) were positive for influenza; 3181 (80.0%) influenza A, 851 (21.4%) influenza B, and 54 (1.4%) influenza A and B positive specimens. Overall, 362/460 (78.7%) isolates from the SH seasons and 316/338 (93.5%) isolates from the NH seasons were matched to the SH and the NH vaccine strains, respectively (p<0.001). Overall, 53.6% and 46.4% SH and NH vaccines, respectively, matched circulating strains in terms of vaccine strains and timing. In six years of surveillance in Kenya, influenza circulated at nearly equal levels during the SH and the NH influenza seasons. Circulating viruses were matched to vaccine strains. The vaccine match decreased when both vaccine strains and timing were taken into consideration. Either vaccine formulation could be suitable for use in Kenya but the optimal timing for influenza vaccination needs to be determined. Copyright © 2016 Elsevier Ltd. All rights reserved.

Transcranial route of brain targeted delivery of methadone in oil.

PubMed

Pathirana, W; Abhayawardhana, P; Kariyawasam, H; Ratnasooriya, W D

2009-05-01

The unique anatomical arrangement of blood vessels and sinuses in the human skull and the brain, the prevalence of a high density of skin appendages in the scalp, extracranial vessels of the scalp communicating with the brain via emissary veins and most importantly, the way that the scalp is used in Ayurvedic medical system in treating diseases associated with the brain show that a drug could be transcranially delivered and targeted to the brain through the scalp. The present study was to investigate by measuring the antinociceptive effect on rats whether the opioid analgesic methadone could be delivered and targeted to the brain by transcranial delivery route. A non aqueous solution of methadone base in sesame oil was used for the application on the scalp. Animal studies were carried out using six groups of male rats consisting of group 1, the oral control treated with distilled water 1 ml; group 2, the oral positive control treated with methadone hydrochloride solution 316.5 mug/ml; group 3, the negative control treated transcranially with the blank sesame oil 0.2 ml and three test groups 4, 5 and 6 treated with three different dose levels of the transcranial oil formulation of methadone base, 41.6 mug/0.2 ml, 104 mug/0.2 ml and 208 mug/0.2 ml, respectively. The antinociceptive effects were examined by subjecting the rats to the hot plate and tail flick tests. The two higher concentrations of the three transcranial methadone formulations yielded response vs time curves showing nearly equal maximum antinociceptive effects similar to that of the oral positive control. Maximum analgesic effect after transcranial administration was observed between 1st and 2nd h and declined up to 6th hour. The results indicate that the transcranial brain targeted delivery of methadone base in the form of an oil based non aqueous solution results in statistically significant antinociceptive effects under experimental conditions. Therefore, it is possible to deliver central nervous system drugs through the proposed transcranial route when suitably formulated.

Fc Receptor-Mediated Activities of Env-Specific Human Monoclonal Antibodies Generated from Volunteers Receiving the DNA Prime-Protein Boost HIV Vaccine DP6-001.

PubMed

Costa, Matthew R; Pollara, Justin; Edwards, Regina Whitney; Seaman, Michael S; Gorny, Miroslaw K; Montefiori, David C; Liao, Hua-Xin; Ferrari, Guido; Lu, Shan; Wang, Shixia

2016-11-15

HIV-1 is able to elicit broadly potent neutralizing antibodies in a very small subset of individuals only after several years of infection, and therefore, vaccines that elicit these types of antibodies have been difficult to design. The RV144 trial showed that moderate protection is possible and that this protection may correlate with antibody-dependent cellular cytotoxicity (ADCC) activity. Our previous studies demonstrated that in an HIV vaccine phase I trial, the DP6-001 trial, a polyvalent Env DNA prime-protein boost formulation could elicit potent and broadly reactive, gp120-specific antibodies with positive neutralization activities. Here we report on the production and analysis of HIV-1 Env-specific human monoclonal antibodies (hMAbs) isolated from vaccinees in the DP6-001 trial. For this initial report, 13 hMAbs from four vaccinees in the DP6-001 trial showed broad binding to gp120 proteins of diverse subtypes both autologous and heterologous to vaccine immunogens. Equally cross-reactive Fc receptor-mediated functional activities, including ADCC and antibody-dependent cellular phagocytosis (ADCP) activities, were present with both immune sera and isolated MAbs, confirming the induction of nonneutralizing functional hMAbs by the DNA prime-protein boost vaccination. Elicitation of broadly reactive hMAbs by vaccination in healthy human volunteers confirms the value of the polyvalent formulation in this HIV vaccine design. The roles of Fc receptor-mediated protective antibody responses are gaining more attention due to their potential contribution to the low-level protection against HIV-1 infection that they provided in the RV144 trial. At the same time, information about hMabs from other human HIV vaccine studies is very limited. In the current study, both immune sera and monoclonal antibodies from vaccinated humans showed not only high-level ADCC and ADCP activities but also cross-subtype ADCC and ADCP activities when a polyvalent DNA prime-protein boost vaccine formulation was used. Copyright © 2016, American Society for Microbiology. All Rights Reserved.

Sustained-release liquisolid compact tablets containing artemether-lumefantrine as alternate-day regimen for malaria treatment to improve patient compliance.

PubMed

Nnamani, Petra Obioma; Ugwu, Agatha Adaora; Ibezim, Emmanuel Chinedu; Kenechukwu, Franklin Chimaobi; Akpa, Paul Achile; Ogbonna, John-Dike Nwabueze; Obitte, Nicholas Chinedu; Odo, Amelia Ngozi; Windbergs, Maike; Lehr, Claus-Michael; Attama, Anthony Amaechi

The present study aimed to develop low-dose liquisolid tablets of two antimalarial drugs artemether-lumefantrine (AL) from a nanostructured lipid carrier (NLC) of lumefantrine (LUM) and estimate the potential of AL as an oral delivery system in malariogenic Wistar mice. LUM-NLCs were prepared by hot homogenization using Precirol ® ATO 5/Transcutol ® HP and tallow fat/Transcutol ® HP optimized systems containing 3:1 ratios of the lipids, respectively, as the matrices. LUM-NLC characteristics, including morphology, particle size, zeta potential, encapsulation efficiency, yield, pH-dependent stability, and interaction studies, were investigated. Optimized LUM-NLCs were mixed with artemether powder and other dry ingredients and the resultant powder evaluated for micromeritics. Subsequent AL liquisolid tablets were tested for in vitro drug release and in vivo antiplasmodial activity in mice infected with Plasmodium berghei berghei (NK 65). Results showed that optimized LUM-NLC were stable, spherical, polydispersed but nanometric. Percentage yield and encapsulation efficiency were ~92% and 93% for Precirol ® ATO 5/Transcutol ® HP batch, then 81% and 95% for tallow fat/Transcutol ® HP batch while LUM was amorphous in NLC matrix. In vitro AL release from liquisolid compacts revealed initial burst release and subsequent sustained release. Liquisolid tablet compacts formulated with Precirol ® ATO 5/Transcutol ® HP-AL4 achieved higher LUM release in simulated intestinal fluid (84.32%) than tallow fat/Transcutol ® HP-BL3 (77.9%). Non-Fickian (anomalous) diffusion and super case II transport were the predominant mechanisms of drug release. Equal parasitemia reduction was observed for both batches of tablet compacts (~92%), superior to the reduction obtained with commercial antimalarial formulations: Coartem ® tablets (86%) and chloroquine phosphate tablets (66%). No significant difference ( P <0.05) in parasite reduction between double (4/24 mg/kg) and single (2/12 mg/kg) strength doses of AL compacts was observed. Our result highlights that AL could be formulated in much lower doses (4/24 mg/kg), for once-in-two days oral administration to improve patient compliance, which is currently not obtainable with conventional AL dosage forms.

Sustained-release liquisolid compact tablets containing artemether–lumefantrine as alternate-day regimen for malaria treatment to improve patient compliance

PubMed Central

Nnamani, Petra Obioma; Ugwu, Agatha Adaora; Ibezim, Emmanuel Chinedu; Kenechukwu, Franklin Chimaobi; Akpa, Paul Achile; Ogbonna, John-Dike Nwabueze; Obitte, Nicholas Chinedu; Odo, Amelia Ngozi; Windbergs, Maike; Lehr, Claus-Michael; Attama, Anthony Amaechi

2016-01-01

The present study aimed to develop low-dose liquisolid tablets of two antimalarial drugs artemether–lumefantrine (AL) from a nanostructured lipid carrier (NLC) of lumefantrine (LUM) and estimate the potential of AL as an oral delivery system in malariogenic Wistar mice. LUM-NLCs were prepared by hot homogenization using Precirol® ATO 5/Transcutol® HP and tallow fat/Transcutol® HP optimized systems containing 3:1 ratios of the lipids, respectively, as the matrices. LUM-NLC characteristics, including morphology, particle size, zeta potential, encapsulation efficiency, yield, pH-dependent stability, and interaction studies, were investigated. Optimized LUM-NLCs were mixed with artemether powder and other dry ingredients and the resultant powder evaluated for micromeritics. Subsequent AL liquisolid tablets were tested for in vitro drug release and in vivo antiplasmodial activity in mice infected with Plasmodium berghei berghei (NK 65). Results showed that optimized LUM-NLC were stable, spherical, polydispersed but nanometric. Percentage yield and encapsulation efficiency were ~92% and 93% for Precirol® ATO 5/Transcutol® HP batch, then 81% and 95% for tallow fat/Transcutol® HP batch while LUM was amorphous in NLC matrix. In vitro AL release from liquisolid compacts revealed initial burst release and subsequent sustained release. Liquisolid tablet compacts formulated with Precirol® ATO 5/Transcutol® HP-AL4 achieved higher LUM release in simulated intestinal fluid (84.32%) than tallow fat/Transcutol® HP-BL3 (77.9%). Non-Fickian (anomalous) diffusion and super case II transport were the predominant mechanisms of drug release. Equal parasitemia reduction was observed for both batches of tablet compacts (~92%), superior to the reduction obtained with commercial antimalarial formulations: Coartem® tablets (86%) and chloroquine phosphate tablets (66%). No significant difference (P<0.05) in parasite reduction between double (4/24 mg/kg) and single (2/12 mg/kg) strength doses of AL compacts was observed. Our result highlights that AL could be formulated in much lower doses (4/24 mg/kg), for once-in-two days oral administration to improve patient compliance, which is currently not obtainable with conventional AL dosage forms. PMID:27932882

Disrupted by disaster: shared experiences of student registered nurse anesthetists affected by hurricane Katrina.

PubMed

Geisz-Everson, Marjorie A; Bennett, Marsha J; Dodd-McCue, Diane; Biddle, Chuck

2012-01-01

The purpose of this focused ethnography was to describe the shared experiences of student registered nurse anesthetists (SRNAs) whose senior year of education and training was disrupted by Hurricane Katrina, as well as to determine the storm's psychosocial impact on them. A convenience sample of 10 former SRNAs participated in focus groups that were audiorecorded, transcribed, and qualitatively analyzed. Three major themes emerged from the study: Seriousness of Urgency, Managing Uncertainty, and Stability Equaled Relief. The themes represented how the SRNAs appraised and coped with the stressful events surrounding Hurricane Katrina. The psychosocial impact of Hurricane Katrina on the SRNAs resulted mainly in temporary increased alcohol consumption and short-term anxiety. One person started smoking. The results of this study should serve as a guide to formulate policies regarding the education of SRNAs during and immediately after a disaster and to provide a framework for future disaster studies regarding SRNAs. Copyright 2012, SLACK Incorporated.

Quantitative interpretations of Visible-NIR reflectance spectra of blood.

PubMed

Serebrennikova, Yulia M; Smith, Jennifer M; Huffman, Debra E; Leparc, German F; García-Rubio, Luis H

2008-10-27

This paper illustrates the implementation of a new theoretical model for rapid quantitative analysis of the Vis-NIR diffuse reflectance spectra of blood cultures. This new model is based on the photon diffusion theory and Mie scattering theory that have been formulated to account for multiple scattering populations and absorptive components. This study stresses the significance of the thorough solution of the scattering and absorption problem in order to accurately resolve for optically relevant parameters of blood culture components. With advantages of being calibration-free and computationally fast, the new model has two basic requirements. First, wavelength-dependent refractive indices of the basic chemical constituents of blood culture components are needed. Second, multi-wavelength measurements or at least the measurements of characteristic wavelengths equal to the degrees of freedom, i.e. number of optically relevant parameters, of blood culture system are required. The blood culture analysis model was tested with a large number of diffuse reflectance spectra of blood culture samples characterized by an extensive range of the relevant parameters.

[Survey on drug-related problems in Lithuania's pharmacies].

PubMed

Kubiliene, Loreta; Liukenskyte, Simona; Savickas, Arūnas; Jureniene, Kristina

2006-01-01

to survey the most common and the most important drug-related problems in Lithuania, to explore their solution and factors influencing it, to formulate recommendations for solving drug-related problems. Pharmacists from community pharmacies participated in a random survey. They filled in questionnaires about drug-related problems and their solutions. It was the first survey on drug-related problems ever carried out in Lithuania. For the first time, it was found out that in Lithuania pharmacists most commonly encountered drug-related problem--additional drug therapy (52.03% of respondents)--and most rarely encountered drug-related problem--dosage too high (3% of respondents). Pharmacists stated that all categories of drug-related problems were of equal importance. It was established that pharmacists commonly solved drug-related problems associated with noncompliance with instructions (72.5% of respondents) and rarely met the problem when improper drug was selected (39.56% of respondents). Patients taking prescription medicines commonly encounter additional drug therapy problem, and patients taking nonprescription medications commonly encounter problems related to noncompliance with instructions.

Stress-intensity factors for a thick-walled cylinder containing an annular imbedded or external or internal surface crack

NASA Technical Reports Server (NTRS)

Erdol, R.; Erdogan, F.

1976-01-01

The elastostatic axisymmetric problem for a long thick-walled cylinder containing a ring-shaped internal or edge crack is considered. Using the standard transform technique the problem is formulated in terms of an integral equation which has a simple Cauchy kernel for the internal crack and a generalized Cauchy kernel for the edge crack as the dominant part. As examples the uniform axial load and the steady-state thermal stress problems have been solved and the related stress intensity factors have been calculated. Among other findings the results show that in the cylinder under uniform axial stress containing an internal crack the stress intensity factor at the inner tip is always greater than that at the outer tip for equal net ligament thicknesses and in the cylinder with an edge crack which is under a state of thermal stress the stress intensity factor is a decreasing function of the crack depth, tending to zero as the crack depth approaches the wall thickness.

Statistical detection of systematic election irregularities

PubMed Central

Klimek, Peter; Yegorov, Yuri; Hanel, Rudolf; Thurner, Stefan

2012-01-01

Democratic societies are built around the principle of free and fair elections, and that each citizen’s vote should count equally. National elections can be regarded as large-scale social experiments, where people are grouped into usually large numbers of electoral districts and vote according to their preferences. The large number of samples implies statistical consequences for the polling results, which can be used to identify election irregularities. Using a suitable data representation, we find that vote distributions of elections with alleged fraud show a kurtosis substantially exceeding the kurtosis of normal elections, depending on the level of data aggregation. As an example, we show that reported irregularities in recent Russian elections are, indeed, well-explained by systematic ballot stuffing. We develop a parametric model quantifying the extent to which fraudulent mechanisms are present. We formulate a parametric test detecting these statistical properties in election results. Remarkably, this technique produces robust outcomes with respect to the resolution of the data and therefore, allows for cross-country comparisons. PMID:23010929

Incompressible Navier-Stokes and parabolized Navier-Stokes solution procedures and computational techniques

NASA Technical Reports Server (NTRS)

Rubin, S. G.

1982-01-01

Recent developments with finite-difference techniques are emphasized. The quotation marks reflect the fact that any finite discretization procedure can be included in this category. Many so-called finite element collocation and galerkin methods can be reproduced by appropriate forms of the differential equations and discretization formulas. Many of the difficulties encountered in early Navier-Stokes calculations were inherent not only in the choice of the different equations (accuracy), but also in the method of solution or choice of algorithm (convergence and stability, in the manner in which the dependent variables or discretized equations are related (coupling), in the manner that boundary conditions are applied, in the manner that the coordinate mesh is specified (grid generation), and finally, in recognizing that for many high Reynolds number flows not all contributions to the Navier-Stokes equations are necessarily of equal importance (parabolization, preferred direction, pressure interaction, asymptotic and mathematical character). It is these elements that are reviewed. Several Navier-Stokes and parabolized Navier-Stokes formulations are also presented.

Application of Monte Carlo techniques to transient thermal modeling of cavity radiometers having diffuse-specular surfaces

NASA Technical Reports Server (NTRS)

Mahan, J. R.; Eskin, L. D.

1981-01-01

A viable alternative to the net exchange method of radiative analysis which is equally applicable to diffuse and diffuse-specular enclosures is presented. It is particularly more advantageous to use than the net exchange method in the case of a transient thermal analysis involving conduction and storage of energy as well as radiative exchange. A new quantity, called the distribution factor is defined which replaces the angle factor and the configuration factor. Once obtained, the array of distribution factors for an ensemble of surface elements which define an enclosure permits the instantaneous net radiative heat fluxes to all of the surfaces to be computed directly in terms of the known surface temperatures at that instant. The formulation of the thermal model is described, as is the determination of distribution factors by application of a Monte Carlo analysis. The results show that when fewer than 10,000 packets are emitted, an unsatisfactory approximation for the distribution factors is obtained, but that 10,000 packets is sufficient.

Time-free transfers between libration-point orbits in the elliptic restricted problem

NASA Astrophysics Data System (ADS)

Howell, K. C.; Hiday-Johnston, L. A.

This work is part of a larger research effort directed toward the formulation of a strategy to design optimal time-free impulsive transfers between three-dimensional libration-point orbits in the vicinity of the interior LI libration point of the Sun-Earth/Moon barycenter system. Inferior transfers that move a spacecraft from a large halo orbit to a smaller halo orbit are considered here. Primer vector theory is applied to non-optimal impulsive trajectories in the elliptic restricted three-body problem in order to establish whether the implementation of a coast in the initial orbit, a coast in the final orbit, or dual coasts accomplishes a reduction in fuel expenditure. The addition of interior impulses is also considered. Results indicate that a substantial savings in fuel can be achieved by the allowance for coastal periods on the specified libration-point orbits. The resulting time-free inferior transfers are compared to time-free superior transfers between halo orbits of equal z-amplitude separation.

Time-free transfers between libration-point orbits in the elliptic restricted problem

NASA Astrophysics Data System (ADS)

Howell, K. C.; Hiday, L. A.

1992-08-01

This work is directed toward the formulation of a strategy to design optimal time-free impulsive transfers between 3D libration-point orbits in the vicinity of the interior L1 libration point of the sun-earth/moon barycenter system. Inferior transfers that move a spacecraft from a large halo orbit to a smaller halo orbit are considered here. Primer vector theory is applied to nonoptimal impulsive trajectories in the elliptic restricted three-body problem in order to establish whether the implementation of a coast in the initial orbit, a coast in the final orbit, or dual coasts accomplishes a reduction in fuel expenditure. The addition of interior impulses is also considered. Results indicate that a substantial savings in fuel can be achieved by the allowance for coastal periods on the specified libration-point orbits. The resulting time-free inferior transfers are compared to time-free superior transfers between halo orbits of equal z-amplitude separation.

Safe Sex in the 1970s: Community Practitioners on the Eve of AIDS.

PubMed

Blair, Thomas R

2017-06-01

In the 1970s, groups of gay and gay-allied health professionals began to formulate guidelines for safer sexual activity, several years before HIV/AIDS. Through such organizations as the National Coalition of Gay Sexually Transmitted Disease Services, Bay Area Physicians for Human Rights, and the Sisters of Perpetual Indulgence, these practitioners developed materials that would define sexual health education for the next four decades, as well as such concepts as "bodily fluids" and the "safe sex hanky." To do so, they used their dual membership in the community and the health professions. Although the dichotomy between the gay community and the medical establishment helped define the early history of HIV/AIDS, the creative work of these socially "amphibious" activists played an equally important part. Amid current debates over preexposure prophylaxis against HIV and Zika virus transmission, lessons for sexual health include the importance of messaging, the difficulty of behavioral change, and the vitality of community-driven strategies to mitigate risk.

Relevance of mission statements in Flemish not-for-profit healthcare organizations.

PubMed

Vandijck, Dominique; Desmidt, Sebastian; Buelens, Marc

2007-03-01

The aims of the study were to determine: (1) which components managers of Flemish not-for-profit healthcare organizations chose to incorporate in their mission statement, (2) how satisfied managers of Flemish not-for-profit healthcare organizations are with the formulation of various mission statement components and (3) if the managers of Flemish not-for-profit healthcare organizations subscribe the presumed positive relationship between mission statements and organizational performance. To address these research questions, a questionnaire was send to a convenience sample of Flemish not-for-profit healthcare managers and to a control group. The results indicate that Flemish not-for-profit healthcare managers do discriminate and differentiate between mission statement components and that they are not equally satisfied with the articulation of every component. Furthermore, Flemish not-for-profit healthcare managers do support the assumption that a well-written mission statement can produce a host of benefits. The mission statement is considered as an energy source, a guide in decision-making and to influence the managers' behaviour.

Three-Dimensional Simulations of Marangoni-Benard Convection in Small Containers by the Least-Squares Finite Element Method

NASA Technical Reports Server (NTRS)

Yu, Sheng-Tao; Jiang, Bo-Nan; Wu, Jie; Duh, J. C.

1996-01-01

This paper reports a numerical study of the Marangoni-Benard (MB) convection in a planar fluid layer. The least-squares finite element method (LSFEM) is employed to solve the three-dimensional Stokes equations and the energy equation. First, the governing equations are reduced to be first-order by introducing variables such as vorticity and heat fluxes. The resultant first-order system is then cast into a div-curl-grad formulation, and its ellipticity and permissible boundary conditions are readily proved. This numerical approach provides an equal-order discretization for velocity, pressure, vorticity, temperature, and heat conduction fluxes, and therefore can provide high fidelity solutions for the complex flow physics of the MB convection. Numerical results reported include the critical Marangoni numbers (M(sub ac)) for the onset of the convection in containers with various aspect ratios, and the planforms of supercritical MB flows. The numerical solutions compared favorably with the experimental results reported by Koschmieder et al..

Analysis of the cross-reactivity of various 56 kDa recombinant protein antigens with serum samples collected after Orientia tsutsugamushi infection by ELISA.

PubMed

Chao, Chien-Chung; Huber, Erin S; Porter, Terrisita B; Zhang, Zhiwen; Ching, Wei-Mei

2011-06-01

Orientia tsutsugamushi, the etiologic agent of scrub typhus, has a highly expressed and immunodominant 56-kD outer membrane protein. This protein is one of the leading candidates for diagnosis and vaccine development for scrub typhus. Previous studies using recombinant 56-kD protein (r56s) derived from Karp strain (Kpr56) in a mouse model have shown good homologous protection but only moderate to poor heterologous protection. We evaluated the cross-reactivity of recombinant 56-kD proteins from Karp, Kato, Gilliam, TA763, and three chimeric 56-kD proteins. Not all r56s are equally reactive with strain-specific serum samples. These data provide a first glance of how reactive these r56s are toward the antiserum of different strains and which r56 exhibits the broadest reactivity. A formulation of this combination has the potential to provide broad protection against the heterologous challenge and to be used in a highly sensitive diagnostic assay.

Expression of the hygromycin B phosphotransferase gene confers tolerance to the herbicide glyphosate.

PubMed

Peñaloza-Vázquez, A; Oropeza, A; Mena, G L; Bailey, A M

1995-05-01

Escherichia coli cells and tobacco (cv. Xanthi) plants transformed with the hygromycin B phosphotransferase gene were able to grow in culture medium containing glyphosate at 2.0 mM. The growth of tobacco calli in media containing increasing glyphosate concentrations was measured. The ID50 for glyphosate was 1.70±0.03 mM for hygromycin-B resistant plants, and 0.45±0.02 mM for control plants. Regenerated plants and progeny selected for resistance to hygromycin B were tested for glyphosate tolerance by spraying them with Faena herbicide (formulated glyphosate with surfactant) at a dose equal to 0.24 kg/ha. This was two times the dose required to kill 100 percent of the control plants. Phosphotransferase activity was measured in the extracts of the transformed leaves by the incorporation of (32)P from [γ(-32)P]ATP and it was observed that hygromycin B phosphotransferase was able to recognize the molecule of glyphosate as substrate.

Theoretical analysis of high-order harmonic generation from a coherent superposition of states

DOE Office of Scientific and Technical Information (OSTI.GOV)

Milosevic, Dejan B.; Max-Born-Institut, Max-Born-Strasse 2a, Berlin, 12489

2006-02-15

A quantum theory of high-order harmonic generation by a strong laser field in the presence of more bound states is formulated. The obtained numerical and analytical results for a two-state hydrogenlike atom model show that the harmonic spectrum consists of two parts: a usual single-state harmonic spectrum of odd harmonics having the energies (2k+1){omega} and a resonant part with the peaks around the excitation energy {delta}{omega}. The energy of the harmonics in the resonant part of the spectrum is equal to {delta}{omega}{+-}{omega}, {delta}{omega}{+-}3{omega}, .... For energies higher than the excitation energy, the resonant part forms a plateau, followed by amore » cutoff. The emission rate of the harmonics in this resonant plateau is many orders of magnitude higher than that of the harmonics generated in the presence of the ground state alone. The influence of the depletion of the initial states, as well as of the pulse shape and intensity, is analyzed.« less

Designing train-speed trajectory with energy efficiency and service quality

NASA Astrophysics Data System (ADS)

Jia, Jiannan; Yang, Kai; Yang, Lixing; Gao, Yuan; Li, Shukai

2018-05-01

With the development of automatic train operations, optimal trajectory design is significant to the performance of train operations in railway transportation systems. Considering energy efficiency and service quality, this article formulates a bi-objective train-speed trajectory optimization model to minimize simultaneously the energy consumption and travel time in an inter-station section. This article is distinct from previous studies in that more sophisticated train driving strategies characterized by the acceleration/deceleration gear, the cruising speed, and the speed-shift site are specifically considered. For obtaining an optimal train-speed trajectory which has equal satisfactory degree on both objectives, a fuzzy linear programming approach is applied to reformulate the objectives. In addition, a genetic algorithm is developed to solve the proposed train-speed trajectory optimization problem. Finally, a series of numerical experiments based on a real-world instance of Beijing-Tianjin Intercity Railway are implemented to illustrate the practicability of the proposed model as well as the effectiveness of the solution methodology.

Statistical detection of systematic election irregularities.

PubMed

Klimek, Peter; Yegorov, Yuri; Hanel, Rudolf; Thurner, Stefan

2012-10-09

Democratic societies are built around the principle of free and fair elections, and that each citizen's vote should count equally. National elections can be regarded as large-scale social experiments, where people are grouped into usually large numbers of electoral districts and vote according to their preferences. The large number of samples implies statistical consequences for the polling results, which can be used to identify election irregularities. Using a suitable data representation, we find that vote distributions of elections with alleged fraud show a kurtosis substantially exceeding the kurtosis of normal elections, depending on the level of data aggregation. As an example, we show that reported irregularities in recent Russian elections are, indeed, well-explained by systematic ballot stuffing. We develop a parametric model quantifying the extent to which fraudulent mechanisms are present. We formulate a parametric test detecting these statistical properties in election results. Remarkably, this technique produces robust outcomes with respect to the resolution of the data and therefore, allows for cross-country comparisons.

Gauge and integrable theories in loop spaces

NASA Astrophysics Data System (ADS)

Ferreira, L. A.; Luchini, G.

2012-05-01

We propose an integral formulation of the equations of motion of a large class of field theories which leads in a quite natural and direct way to the construction of conservation laws. The approach is based on generalized non-abelian Stokes theorems for p-form connections, and its appropriate mathematical language is that of loop spaces. The equations of motion are written as the equality of a hyper-volume ordered integral to a hyper-surface ordered integral on the border of that hyper-volume. The approach applies to integrable field theories in (1+1) dimensions, Chern-Simons theories in (2+1) dimensions, and non-abelian gauge theories in (2+1) and (3+1) dimensions. The results presented in this paper are relevant for the understanding of global properties of those theories. As a special byproduct we solve a long standing problem in (3+1)-dimensional Yang-Mills theory, namely the construction of conserved charges, valid for any solution, which are invariant under arbitrary gauge transformations.

THE TWO-WAVELENGTH METHOD OF MICROSPECTROPHOTOMETRY

PubMed Central

Mendelsohn, Mortimer L.

1961-01-01

In connection with the potential development of automatic two-wavelength microspectrophotometry, a new version of the two-wavelength method has been formulated. Unlike its predecessors, the Ornstein and Patau versions, the new method varies the area of the photometric field seeking to maximize a relationship between distributional errors at the two wavelengths. Stating this distributional error relationship in conventional photometric terms, the conditions at the maximum are defined by taking the first derivative with respect to field size and setting it equal to zero. This operation supplies two equations; one relates the transmittances at the two wavelengths, and a second states the relative amount of chromophore in the field in terms of transmittance at one wavelength. With the first equation to drive a servomechanism which sets the appropriate field size, the desired answer can then be obtained directly and continuously from the second equation. The result is identical in theory with those of the earlier methods, but the technique is more suitable for electronic computing. PMID:14472536

Acoustic propagation in curved ducts with extended reacting wall treatment

NASA Technical Reports Server (NTRS)

Baumeister, Kenneth J.

1989-01-01

A finite-element Galerkin formulation was employed to study the attenuation of acoustic waves propagating in two-dimensional S-curved ducts with absorbing walls without a mean flow. The reflection and transmission at the entrance and the exit of a curved duct were determined by coupling the finite-element solutions in the curved duct to the eigenfunctions of an infinite, uniform, hard wall duct. In the frequency range where the duct height and acoustic wave length are nearly equal, the effects of duct length, curvature (duct offset) and absorber thickness were examined. For a given offset in the curved duct, the length of the S-duct was found to significantly affect both the absorptive and reflective characteristics of the duct. A means of reducing the number of elements in the absorber region was also presented. In addition, for a curved duct, power attenuation contours were examined to determine conditions for maximum acoustic power absorption. Again, wall curvature was found to significantly effect the optimization process.

Novel permanent magnet linear motor with isolated movers: analytical, numerical and experimental study.

PubMed

Yan, Liang; Peng, Juanjuan; Jiao, Zongxia; Chen, Chin-Yin; Chen, I-Ming

2014-10-01

This paper proposes a novel permanent magnet linear motor possessing two movers and one stator. The two movers are isolated and can interact with the stator poles to generate independent forces and motions. Compared with conventional multiple motor driving system, it helps to increase the system compactness, and thus improve the power density and working efficiency. The magnetic field distribution is obtained by using equivalent magnetic circuit method. Following that, the formulation of force output considering armature reaction is carried out. Then inductances are analyzed with finite element method to investigate the relationships of the two movers. It is found that the mutual-inductances are nearly equal to zero, and thus the interaction between the two movers is negligible. A research prototype of the linear motor and a measurement apparatus on thrust force have been developed. Both numerical computation and experiment measurement are conducted to validate the analytical model of thrust force. Comparison shows that the analytical model matches the numerical and experimental results well.

Unified treatment of microscopic boundary conditions and efficient algorithms for estimating tangent operators of the homogenized behavior in the computational homogenization method

NASA Astrophysics Data System (ADS)

Nguyen, Van-Dung; Wu, Ling; Noels, Ludovic

2017-03-01

This work provides a unified treatment of arbitrary kinds of microscopic boundary conditions usually considered in the multi-scale computational homogenization method for nonlinear multi-physics problems. An efficient procedure is developed to enforce the multi-point linear constraints arising from the microscopic boundary condition either by the direct constraint elimination or by the Lagrange multiplier elimination methods. The macroscopic tangent operators are computed in an efficient way from a multiple right hand sides linear system whose left hand side matrix is the stiffness matrix of the microscopic linearized system at the converged solution. The number of vectors at the right hand side is equal to the number of the macroscopic kinematic variables used to formulate the microscopic boundary condition. As the resolution of the microscopic linearized system often follows a direct factorization procedure, the computation of the macroscopic tangent operators is then performed using this factorized matrix at a reduced computational time.

Modeling local extinction in turbulent combustion using an embedding method

NASA Astrophysics Data System (ADS)

Knaus, Robert; Pantano, Carlos

2012-11-01

Local regions of extinction in diffusion flames, called ``flame holes,'' can reduce the efficiency of combustion and increase the production of certain pollutants. At sufficiently high speeds, a flame may also be lifted from the rim of the burner to a downstream location that may be stable. These two phenomena share a common underlying mechanism of propagation related to edge-flame dynamics where chemistry and fluid mechanics are equally important. We present a formulation that describes the formation, propagation, and growth of flames holes on the stoichiometric surface using edge flame dynamics. The boundary separating the flame from the quenched region is modeled using a progress variable defined on the moving stoichiometric surface that is embedded in the three-dimensional space using an extension algorithm. This Cartesian problem is solved using a high-order finite-volume WENO method extended to this nonconservative problem. This algorithm can track the dynamics of flame holes in a turbulent reacting-shear layer and model flame liftoff without requiring full chemistry calculations.

FROM THE HISTORY OF PHYSICS: The Einstein formula: E0=mc2. "Isn't the Lord laughing?"

NASA Astrophysics Data System (ADS)

Okun, L. B.

2008-05-01

The article traces the way Einstein formulated the relation between energy and mass in his work from 1905 to 1955. Einstein emphasized quite often that the mass m of a body is equivalent to its rest energy E0. At the same time, he frequently resorted to the less clear-cut statement of the equivalence of energy and mass. As a result, Einstein's formula E0=mc2 still remains much less known than its popular form, E=mc2, in which E is the total energy equal to the sum of the rest energy and the kinetic energy of a freely moving body. One of the consequences of this is the widespread fallacy that the mass of a body increases when its velocity increases and even that this is an experimental fact. As wrote the playwright A N Ostrovsky "Something must exist for people, something so austere, so lofty, so sacrosanct that it would make profaning it unthinkable."

Dynamic Gas Flow Effects on the ESD of Aerospace Vehicle Surfaces

NASA Technical Reports Server (NTRS)

Hogue, Michael D.; Cox, Rachel E.; Mulligan, Jaysen; Ahmed, Kareem; Wilson, Jennifer G.; Calle, Luz M.

2017-01-01

The purpose of this work is to develop a version of Paschen's Law that takes into account the flow of ambient gas past electrode surfaces. Paschen's Law does not consider the flow of gas past an aerospace vehicle, whose surfaces may be triboelectrically charged by dust or ice crystal impingement while traversing the atmosphere. The basic hypothesis of this work is that the number of electron-ion pairs created per unit distance between electrode surfaces is mitigated by the electron-ion pairs removed per unit distance by the flow of gas. The revised theoretical model must be a function of the mean velocity, v (sub xm), of the ambient gas and reduce to Paschen's law when the gas mean velocity, v (sub xm) equals 0. A new theoretical formulation of Paschen's Law, taking into account the Mach number and dynamic pressure, derived by the authors, will be discussed. This equation was evaluated by wind tunnel experimentation whose results were consistent with the model hypothesis.

One year comparative clinical evaluation of EQUIA with resin-modified glass ionomer and a nanohybrid composite in noncarious cervical lesions

PubMed Central

Vaid, Deepa Sunil; Shah, Nimisha Chinmay; Bilgi, Priyanka Shripad

2015-01-01

Aims: Comparative evaluation of EQUIA with a resin-modified glass ionomer cement (RMGIC; GC Gold Label glass ionomer light cured universal restorative cement) and a nanohybrid composite (Tetric N-Ceram) in noncarious cervical lesions (NCCLs). Background: To establish the most suitable material for the restoration of NCCLs. Settings and Design: In vivo study. Materials and Methods: Eighty-seven NCCLs were randomly restored with EQUIA, a RMGIC, and a nanohybrid composite. Clinical evaluation of the restorations was done following the Unites States Public Health criteria by a single-blinded investigator. Data were formulated, and statistical analysis was done by Chi-square test. Statistical Analysis Used: Chi-square test. Results: No significant difference was found between EQUIA, RMGIC, and nanohybrid composite at 1-month, at 6 months, and at 1-year (P > 0.05). Conclusions: EQUIA, resin-modified glass ionomer, and nanohybrid composite performed equally at 1-month, 6 months, and 1-year follow-up periods. PMID:26752837

Time-fixed rendezvous by impulse factoring with an intermediate timing constraint. [for transfer orbits

NASA Technical Reports Server (NTRS)

Green, R. N.; Kibler, J. F.; Young, G. R.

1974-01-01

A method is presented for factoring a two-impulse orbital transfer into a three- or four-impulse transfer which solves the rendezvous problem and satisfies an intermediate timing constraint. Both the time of rendezvous and the intermediate time of a alinement are formulated as any element of a finite sequence of times. These times are integer multiples of a constant plus an additive constant. The rendezvous condition is an equality constraint, whereas the intermediate alinement is an inequality constraint. The two timing constraints are satisfied by factoring the impulses into collinear parts that vectorially sum to the original impulse and by varying the resultant period differences and the number of revolutions in each orbit. Five different types of solutions arise by considering factoring either or both of the two impulses into two or three parts with a limit for four total impulses. The impulse-factoring technique may be applied to any two-impulse transfer which has distinct orbital periods.

Bile Salt Stabilized Vesicles (Bilosomes): A Novel Nano-Pharmaceutical Design for Oral Delivery of Proteins and Peptides.

PubMed

Ahmad, Javed; Singhal, Madhur; Amin, Saima; Rizwanullah, Md; Akhter, Sohail; Kamal, Mohammad Amjad; Haider, Nafis; Midoux, Patrick; Pichon, Chantal

2017-01-01

With the advent of novel vesicular drug delivery systems especially bilosomes, for large molecular weight proteins and peptides, their oral administration seems a viable approach. These nano-vesicles have shown promising results for the effective delivery of insulin and other therapeutics, perhaps due to their structural composition. The present review has elaborated the biopharmaceutical challenges for the oral delivery of therapeutic proteins and peptides as well as presented a novel approach to deliver the essential macromolecules through oral route as bilosomes. The extensive search has been presented related to the formulation, evaluation and in vivo performance of bilosomes. Some of the crucial findings related to bilosomes have corroborated them superior to other colloidal carriers. The successful drug delivery through bilosomes requires significant justifications related to their interaction with the biological membranes. The other aspects such as absolute absorption, safety and toxicity of bilosome drug delivery should also be equally considered. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

On optimal soft-decision demodulation

NASA Technical Reports Server (NTRS)

Lee, L. N.

1975-01-01

Wozencraft and Kennedy have suggested that the appropriate demodulator criterion of goodness is the cut-off rate of the discrete memoryless channel created by the modulation system; the criterion of goodness adopted in this note is the symmetric cut-off rate which differs from the former criterion only in that the signals are assumed equally likely. Massey's necessary condition for optimal demodulation of binary signals is generalized to M-ary signals. It is shown that the optimal demodulator decision regions in likelihood space are bounded by hyperplanes. An iterative method is formulated for finding these optimal decision regions from an initial good quess. For additive white Gaussian noise, the corresponding optimal decision regions in signal space are bounded by hypersurfaces with hyperplane asymptotes; these asymptotes themselves bound the decision regions of a demodulator which, in several examples, is shown to be virtually optimal. In many cases, the necessary condition for demodulator optimality is also sufficient, but a counter example to its general sufficiency is given.

The interrelationship between self-image disparity and social competence, defensive style, and adjustment status.

PubMed

Mylet, M; Styfco, S J; Zigler, E

1979-09-01

Groups of 40 psychiatric and 40 nonpsychiatric male patients were subdivided into equal groups of high and low social competence. Each patient completed a task battery which included three measures of self-image disparity and the Byrne repression-sensitization scale. High competence patients of both types were found to have higher self-image disparities than low competence patients. Psychiatric patients were found to have higher disparity scores than nonpsychiatric patients, although some evidence indicated that this was true only for the low competence groups. Higher scores on the Byrne scale (indicating sensitization) were found for high as compared to low competence patients, and for the psychiatric as compared to nonpsychiatric groups. Defensive style correlated significantly with each of the self-image measures. The results were discussed in the context of both developmental and Rogerian formulations. It was concluded that an individual's maturational level influences both self-image and defensive style, even when the individual is judged psychologically maladjusted.

Precipitation Structure in the Sierra Nevada of California During Winter

NASA Technical Reports Server (NTRS)

Pandey, Ganesh R.; Cayan, Daniel R.; Georgakakos, Kostantine P.

1998-01-01

The influences of upper air characteristics along the coast of California upon the winter time precipitation in the Sierra Nevada region were investigated. Most precipitation episodes in the Sierra are associated with moist southwesterly winds and also tend to occur when the 700-mb temperature is close to -2 C. This favored wind direction and temperature signifies the equal importance of moisture transport and orographic lifting for maximum precipitation frequency. Making use of this observation, simple linear models were formulated to quantify the precipitation totals observed at different sites as a function of moisture transport. The skill of the model is least for daily precipitation and increases with time scale of aggregation. In terms of incremental gain, the skill of the model is optimal for an aggregation period of 5-7 days, which is also the duration of the most frequent precipitation events in the Sierra. This indicates that upper air moisture transport at can be used to make reasonable estimates of the precipitation totals for most frequent events in the Sierra region.