Parabolic Trough Collector Cost Update for the System Advisor Model (SAM)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kurup, Parthiv; Turchi, Craig S.
2015-11-01
This report updates the baseline cost for parabolic trough solar fields in the United States within NREL's System Advisor Model (SAM). SAM, available at no cost at https://sam.nrel.gov/, is a performance and financial model designed to facilitate decision making for people involved in the renewable energy industry. SAM is the primary tool used by NREL and the U.S. Department of Energy (DOE) for estimating the performance and cost of concentrating solar power (CSP) technologies and projects. The study performed a bottom-up build and cost estimate for two state-of-the-art parabolic trough designs -- the SkyTrough and the Ultimate Trough. The SkyTroughmore » analysis estimated the potential installed cost for a solar field of 1500 SCAs as $170/m 2 +/- $6/m 2. The investigation found that SkyTrough installed costs were sensitive to factors such as raw aluminum alloy cost and production volume. For example, in the case of the SkyTrough, the installed cost would rise to nearly $210/m 2 if the aluminum alloy cost was $1.70/lb instead of $1.03/lb. Accordingly, one must be aware of fluctuations in the relevant commodities markets to track system cost over time. The estimated installed cost for the Ultimate Trough was only slightly higher at $178/m 2, which includes an assembly facility of $11.6 million amortized over the required production volume. Considering the size and overall cost of a 700 SCA Ultimate Trough solar field, two parallel production lines in a fully covered assembly facility, each with the specific torque box, module and mirror jigs, would be justified for a full CSP plant.« less
NASA Technical Reports Server (NTRS)
Selcuk, M. K.
1977-01-01
The usefulness of vee-trough concentrators in improving the efficiency and reducing the cost of collectors assembled from evacuated tube receivers was studied in the vee-trough/vacuum tube collector (VTVTC) project. The VTVTC was analyzed rigorously and various mathematical models were developed to calculate the optical performance of the vee-trough concentrator and the thermal performance of the evacuated tube receiver. A test bed was constructed to verify the mathematical analyses and compare reflectors made out of glass, Alzak and aluminized FEP Teflon. Tests were run at temperatures ranging from 95 to 180 C. Vee-trough collector efficiencies of 35 to 40% were observed at an operating temperature of about 175 C. Test results compared well with the calculated values. Predicted daily useful heat collection and efficiency values are presented for a year's duration of operation temperatures ranging from 65 to 230 C. Estimated collector costs and resulting thermal energy costs are presented. Analytical and experimental results are discussed along with a complete economic evaluation.
Optimized molten salt receivers for ultimate trough solar fields
NASA Astrophysics Data System (ADS)
Riffelmann, Klaus-J.; Richert, Timo; Kuckelkorn, Thomas
2016-05-01
Today parabolic trough collectors are the most successful concentrating solar power (CSP) technology. For the next development step new systems with increased operation temperature and new heat transfer fluids (HTF) are currently developed. Although the first power tower projects have successfully been realized, up to now there is no evidence of an all-dominant economic or technical advantage of power tower or parabolic trough. The development of parabolic trough technology towards higher performance and significant cost reduction have led to significant improvements in competitiveness. The use of molten salt instead of synthetic oil as heat transfer fluid will bring down the levelized costs of electricity (LCOE) even further while providing dispatchable energy with high capacity factors. FLABEG has developed the Ultimate TroughTM (UT) collector, jointly with sbp Sonne GmbH and supported by public funds. Due to its validated high optical accuracy, the collector is very suitable to operate efficiently at elevated temperatures up to 550 °C. SCHOTT will drive the key-innovations by introducing the 4th generation solar receiver that addresses the most significant performance and cost improvement measures. The new receivers have been completely redesigned to provide a product platform that is ready for high temperature operation up to 550 °C. Moreover distinct product features have been introduced to reduce costs and risks in solar field assembly and installation. The increased material and design challenges incurred with the high temperature operation have been reflected in sophisticated qualification and validation procedures.
NASA Technical Reports Server (NTRS)
Selcuk, M. K.
1979-01-01
The Vee-Trough/Vacuum Tube Collector (VTVTC) aimed to improve the efficiency and reduce the cost of collectors assembled from evacuated tube receivers. The VTVTC was analyzed rigorously and a mathematical model was developed to calculate the optical performance of the vee-trough concentrator and the thermal performance of the evacuated tube receiver. A test bed was constructed to verify the mathematical analyses and compare reflectors made out of glass, Alzak and aluminized GEB Teflon. Tests were run at temperatures ranging from 95 to 180 C during the months of April, May, June, July and August 1977. Vee-trough collector efficiencies of 35-40 per cent were observed at an operating temperature of about 175 C. Test results compared well with the calculated values. Test data covering a complete day are presented for selected dates throughout the test season. Predicted daily useful heat collection and efficiency values are presented for a year's duration at operation temperatures ranging from 65 to 230 C. Estimated collector costs and resulting thermal energy costs are presented. Analytical and experimental results are discussed along with an economic evaluation.
Reflector Technology Development and System Design for Concentrating Solar Power Technologies
DOE Office of Scientific and Technical Information (OSTI.GOV)
Adam Schaut
2011-12-30
Alcoa began this program in March of 2008 with the goal of developing and validating an advanced CSP trough design to lower the levelized cost of energy (LCOE) as compared to existing glass based, space-frame trough technology. In addition to showing a pathway to a significant LCOE reduction, Alcoa also desired to create US jobs to support the emerging CSP industry. Alcoa's objective during Phase I: Concept Feasibility was to provide the DOE with a design approach that demonstrates significant overall system cost savings without sacrificing performance. Phase I consisted of two major tasks; reflector surface development and system conceptmore » development. Two specific reflective surface technologies were investigated, silver metallized lamination, and thin film deposition both applied on an aluminum substrate. Alcoa prepared samples; performed test validation internally; and provided samples to the NREL for full-spectrum reflectivity measurements. The final objective was to report reflectivity at t = 0 and the latest durability results as of the completion of Phase 1. The target criteria for reflectance and durability were as follows: (1) initial (t = 0), hemispherical reflectance >93%, (2) initial spectral reflectance >90% for 25-mrad reading and >87% for 7-mrad reading, and (3) predicted 20 year durability of less than 5% optical performance drop. While the results of the reflective development activities were promising, Alcoa was unable to down-select on a reflective technology that met the target criteria. Given the progress and potential of both silver film and thin film technologies, Alcoa continued reflector surface development activities in Phase II. The Phase I concept development activities began with acquiring baseline CSP system information from both CSP Services and the DOE. This information was used as the basis to develop conceptual designs through ideation sessions. The concepts were evaluated based on estimated cost and high-level structural performance. The target criteria for the concept development was to achieve a solar field cost savings of 25%-50% thereby meeting or exceeding the DOE solar field cost savings target of $350/m2. After evaluating various structural design approaches, Alcoa down-selected to a monocoque, dubbed Wing Box, design that utilizes the reflective surface as a structural, load carrying member. The cost and performance potential of the Wing Box concept was developed via initial finite element analysis (FEA) and cost modeling. The structural members were sized through material utilization modeling when subjected to representative loading conditions including wind loading. Cost modeling was utilized to refine potential manufacturing techniques that could be employed to manufacture the structural members. Alcoa concluded that an aluminum intensive collector design can achieve significant cost savings without sacrificing performance. Based on the cost saving potential of this Concept Feasibility study, Alcoa recommended further validation of this CSP approach through the execution of Phase II: Design and Prototype Development. Alcoa Phase II objective was to provide the DOE with a validated CSP trough design that demonstrates significant overall system cost savings without sacrificing performance. Phase II consisted of three major tasks; Detail System Design, Prototype Build, and System Validation. Additionally, the reflector surface development that began in Phase I was continued in Phase II. After further development work, Alcoa was unable to develop a reflective technology that demonstrated significant performance or cost benefits compared to commercially available CSP reflective products. After considering other commercially available reflective surfaces, Alcoa selected Alano's MIRO-SUN product for use on the full scale prototype. Although MIRO-SUN has a lower specular reflectivity compared to other options, its durability in terms of handling, cleaning, and long-term reflectivity was deemed the most important attribute to successfully validate Alcoa's advanced trough architecture. To validate the performance of the Wing Box trough, a 6 meter aperture by 14 meter long prototype trough was built. For ease of shipping to and assembly at NREL's test facility, the prototype was fabricated in two half modules and joined along the centerline to create the Wing Box trough. The trough components were designed to achieve high precision of the reflective surface while leveraging high volume manufacturing and assembly techniques.« less
NASA Technical Reports Server (NTRS)
Selcuk, M. K.
1976-01-01
A solar heat collection system employing non-tracking reflectors integrated with a fixed vacuum tube receiver which achieves modest year-round concentration (about 2) of the sunlight at low capital costs is discussed. The axis of the vee-trough reflector lies in a east-west direction and requires reversal of the reflector surfaces only twice a year without disturbing the receiver tubes and associated plumbing. It collects most of the diffuse flux. The vacuum tube receiver with selective absorber has no convection losses while radiation and conduction losses are minimal. Significant cost reductions are offered since the vee-trough can be fabricated from inexpensive polished or plastic reflector laminated sheet metal covering 2/3 of the collection area, and only about 1/3 of the area is covered with the more expensive vacuum tube receivers. Thermal and economic performance of the vee-trough vacuum tube system, year-round variation of the concentration factor, incident flux, useful heat per unit area at various operation temperatures and energy cost estimates are presented. The electrical energy cost is estimated to be 77 mills/kWh, and the system construction cost is estimated to be $1140/kWe.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Stettenheim, Joel
Norwich Technologies (NT) is developing a disruptively superior solar field for trough concentrating solar power (CSP). Troughs are the leading CSP technology (85% of installed capacity), being highly deployable and similar to photovoltaic (PV) systems for siting. NT has developed the SunTrap receiver, a disruptive alternative to vacuum-tube concentrating solar power (CSP) receivers, a market currently dominated by the Schott PTR-70. The SunTrap receiver will (1) operate at higher temperature (T) by using an insulated, recessed radiation-collection system to overcome the energy losses that plague vacuum-tube receivers at high T, (2) decrease acquisition costs via simpler structure, and (3) dramaticallymore » increase reliability by eliminating vacuum. It offers comparable optical efficiency with thermal loss reduction from ≥ 26% (at presently standard T) to ≥ 55% (at high T), lower acquisition costs, and near-zero O&M costs.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
May, E. K.; Forristall, R.
2005-11-01
Industrial Solar Technology has assembled a team of experts to develop a large-aperture parabolic trough for the electric power market that moves beyond cost and operating limitations of 1980's designs based on sagged glass reflectors. IST's structurally efficient space frame design will require nearly 50% less material per square meter than a Solel LS-2 concentrator and the new trough will rotate around the focal point. This feature eliminates flexhoses that increase pump power, installation and maintenance costs. IST aims to deliver a concentrator module costing less than $100 per square meter that can produce temperatures up to 400 C. Themore » IST concentrator is ideally suited for application of front surface film reflectors and ensures that US corporations will manufacture major components, except for the high temperature receivers.« less
Solar photochemical process engineering for production of fuels and chemicals
NASA Technical Reports Server (NTRS)
Biddle, J. R.; Peterson, D. B.; Fujita, T.
1984-01-01
The engineering costs and performance of a nominal 25,000 scmd (883,000 scfd) photochemical plant to produce dihydrogen from water were studied. Two systems were considered, one based on flat-plate collector/reactors and the other on linear parabolic troughs. Engineering subsystems were specified including the collector/reactor, support hardware, field transport piping, gas compression equipment, and balance-of-plant (BOP) items. Overall plant efficiencies of 10.3 and 11.6% are estimated for the flat-plate and trough systems, respectively, based on assumed solar photochemical efficiencies of 12.9 and 14.6%. Because of the opposing effects of concentration ratio and operating temperature on efficiency, it was concluded that reactor cooling would be necessary with the trough system. Both active and passive cooling methods were considered. Capital costs and energy costs, for both concentrating and non-concentrating systems, were determined and their sensitivity to efficiency and economic parameters were analyzed. The overall plant efficiency is the single most important factor in determining the cost of the fuel.
Solar photochemical process engineering for production of fuels and chemicals
NASA Technical Reports Server (NTRS)
Biddle, J. R.; Peterson, D. B.; Fujita, T.
1985-01-01
The engineering costs and performance of a nominal 25,000 scmd (883,000 scfd) photochemical plant to produce dihydrogen from water were studied. Two systems were considered, one based on flat-plate collector/reactors and the other on linear parabolic troughs. Engineering subsystems were specified including the collector/reactor, support hardware, field transport piping, gas compression equipment, and balance-of-plant (BOP) items. Overall plant efficiencies of 10.3 and 11.6 percent are estimated for the flat-plate and trough systems, respectively, based on assumed solar photochemical efficiencies of 12.9 and 14.6 percent. Because of the opposing effects of concentration ratio and operating temperature on efficiency, it was concluded that reactor cooling would be necessary with the trough system. Both active and passive cooling methods were considered. Capital costs and energy costs, for both concentrating and non-concentrating systems, were determined and their sensitivity to efficiency and economic parameters were analyzed. The overall plant efficiency is the single most important factor in determining the cost of the fuel.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Grogan, Dylan C. P.
2013-08-15
Executive Summary This Final Report for the "Development of Molten-Salt Heat Transfer Fluid (HTF) Technology for Parabolic Trough Solar Power Plants” describes the overall project accomplishments, results and conclusions. Phase 1 analyzed the feasibility, cost and performance of a parabolic trough solar power plant with a molten salt heat transfer fluid (HTF); researched and/or developed feasible component options, detailed cost estimates and workable operating procedures; and developed hourly performance models. As a result, a molten salt plant with 6 hours of storage was shown to reduce Thermal Energy Storage (TES) cost by 43.2%, solar field cost by 14.8%, and levelizedmore » cost of energy (LCOE) by 9.8% - 14.5% relative to a similar state-of-the-art baseline plant. The LCOE savings range met the project’s Go/No Go criteria of 10% LCOE reduction. Another primary focus of Phase 1 and 2 was risk mitigation. The large risk areas associated with a molten salt parabolic trough plant were addressed in both Phases, such as; HTF freeze prevention and recovery, collector components and piping connections, and complex component interactions. Phase 2 analyzed in more detail the technical and economic feasibility of a 140 MWe,gross molten-salt CSP plant with 6 hours of TES. Phase 2 accomplishments included developing technical solutions to the above mentioned risk areas, such as freeze protection/recovery, corrosion effects of applicable molten salts, collector design improvements for molten salt, and developing plant operating strategies for maximized plant performance and freeze risk mitigation. Phase 2 accomplishments also included developing and thoroughly analyzing a molten salt, Parabolic Trough power plant performance model, in order to achieve the project cost and performance targets. The plant performance model and an extensive basic Engineering, Procurement, and Construction (EPC) quote were used to calculate a real levelized cost of energy (LCOE) of 11.50¢/kWhe , which achieved the Phase 2 Go/No Go target of less than 0.12¢/kWhe. Abengoa Solar has high confidence that the primary risk areas have been addressed in the project and a commercial plant utilizing molten salt is economically and technically feasible. The strong results from the Phase 1 and 2 research, testing, and analyses, summarized in this report, led Abengoa Solar to recommend that the project proceed to Phase 3. However, a commercially viable collector interconnection was not fully validated by the end of Phase 2, combined with the uncertainty in the federal budget, forced the DOE and Abengoa Solar to close the project. Thus the resources required to construct and operate a molten salt pilot plant will be solely supplied by Abengoa Solar.« less
Heat Loss Testing of Schott's 2008 PTR70 Parabolic Trough Receiver
DOE Office of Scientific and Technical Information (OSTI.GOV)
Burkholder, Frank; Kutscher, Chuck
2009-05-01
Two Schott 2008 model year PTR70 HCEs were tested on NREL's heat loss test stand from 100 - 500 deg C in 50 deg C increments. Absorber emittance was determined from the laboratory testing so that the performance of the HCEs could be modeled in a parabolic trough collector. Collector/HCE simulation results for many different field operation conditions were used to create heat loss correlationcoefficients for Excelergy and SAM. SAM estimates that the decreased emittance of the 2008 PTR70 will decrease the LCOE for parabolic trough power plants by 0.5 cents/kWh and increase the electricity generated by 5% relative tomore » previous PTR70s. These conclusions assume that the 2008 PTR70 is supplied at the same cost and with the same optical performance as earlier PTR70 models.« less
NASA Technical Reports Server (NTRS)
Latta, A. F.; Bowyer, J. M.; Fujita, T.
1979-01-01
This paper presents the performance and cost of four 10-MWe advanced solar thermal electric power plants sited in various regions of the continental United States. Each region has different insolation characteristics which result in varying collector field areas, plant performance, capital costs, and energy costs. The paraboloidal dish, central receiver, cylindrical parabolic trough, and compound parabolic concentrator (CPC) comprise the advanced concepts studied. This paper contains a discussion of the regional insolation data base, a description of the solar systems' performances and costs, and a presentation of a range for the forecast cost of conventional electricity by region and nationally over the next several decades.
Revisiting Parabolic Trough Concentrators for Industrial Process Heat in the United States
DOE Office of Scientific and Technical Information (OSTI.GOV)
Turchi, Craig S.; Kurup, Parthiv; Zhu, Guangdong
After significant interest in the 1970s, but relatively few deployments, the use of concentrating solar collectors for thermal applications, including enhanced oil recovery, desalination, and industrial process heat (IPH), is again increasing in global interest. In particular, recent advances in collector design and manufacturing have led to reduced cost per square meter of aperture area. In this study, analysis of a modern parabolic trough that is suited for use in small solar IPH (SIPH) applications predicts that the installed solar field cost can be as low as $170/m2. A slightly higher cost of $200/m2 is estimated for facilities typical ofmore » a SIPH plant size. Full project costs will include additional costs for contingency, piping and heat exchanger interface, and project indirect costs. The cost for solar-generated heat by SIPH is quantified by defining the levelized cost of heat (LCOH). California offers a favorable environment for SIPH given its good insolation, gas prices typically higher than the national average, and policies promoting solar-thermal deployment. Given historically low gas prices, competing with natural gas remains the primary challenge to deployment. However, this study finds that the solar LCOH for many regions in California is lower than the LCOH from natural gas, using a representative installed solar hardware price and the average price for industrial natural gas in California. Lastly, modification are in progress to the parabolic trough model within NREL's System Advisor Model (SAM) to allow users to more easily predict performance for these steam-generation applications.« less
Solar photovoltaic reflective trough collection structure
Anderson, Benjamin J.; Sweatt, William C.; Okandan, Murat; Nielson, Gregory N.
2015-11-19
A photovoltaic (PV) solar concentration structure having at least two troughs encapsulated in a rectangular parallelepiped optical plastic structure, with the troughs filled with an optical plastic material, the troughs each having a reflective internal surface and approximately parabolic geometry, and the troughs each including photovoltaic cells situated so that light impinging on the optical plastic material will be concentrated onto the photovoltaic cells. Multiple structures can be connected to provide a solar photovoltaic collection system that provides portable, efficient, low-cost electrical power.
Jani, Meghna; Gavan, Sean; Chinoy, Hector; Dixon, William G; Harrison, Beverley; Moran, Andrew; Barton, Anne; Payne, Katherine
2016-12-01
To identify and quantify resource required and associated costs for implementing TNF-α inhibitor (TNFi) drug level and anti-drug antibody (ADAb) tests in UK rheumatology practice. A microcosting study, assuming the UK National Health Service perspective, identified the direct medical costs associated with providing TNFi drug level and ADAb testing in clinical practice. Resource use and costs per patient were identified via four stages: identification of a patient pathway with resource implications; estimation of the resources required; identification of the cost per unit of resource (2015 prices); and calculation of the total costs per patient. Univariate and multiway sensitivity analyses were performed using the variation in resource use and unit costs. Total costs for TNFi drug level and concurrent ADAb testing, assessed using ELISAs on trough serum levels, were £152.52/patient (range: £147.68-159.24) if 40 patient samples were tested simultaneously. For the base-case analysis, the pre-testing phase incurred the highest costs, which included booking an additional appointment to acquire trough blood samples. The additional appointment was the key driver of costs per patient (67% of the total cost), and labour accounted for 10% and consumables 23% of the total costs. Performing ELISAs once per patient (rather than in duplicate) reduced the total costs to £133.78/patient. This microcosting study is the first assessing the cost of TNFi drug level and ADAb testing. The results could be used in subsequent cost-effectiveness analyses of TNFi pharmacological tests to target treatments and inform future policy recommendations. © The Author 2016. Published by Oxford University Press on behalf of the British Society for Rheumatology.
LCOE reduction potential of parabolic trough and solar tower CSP technology until 2025
NASA Astrophysics Data System (ADS)
Dieckmann, Simon; Dersch, Jürgen; Giuliano, Stefano; Puppe, Michael; Lüpfert, Eckhard; Hennecke, Klaus; Pitz-Paal, Robert; Taylor, Michael; Ralon, Pablo
2017-06-01
Concentrating Solar Power (CSP), with an installed capacity of 4.9 GW by 2015, is a young technology compared to other renewable power generation technologies. A limited number of plants and installed capacity in a small challenging market environment make reliable and transparent cost data for CSP difficult to obtain. The International Renewable Energy Agency (IRENA) and the DLR German Aerospace Center gathered and evaluated available cost data from various sources for this publication in order to yield transparent, reliable and up-to-date cost data for a set of reference parabolic trough and solar tower plants in the year 2015 [1]. Each component of the power plant is analyzed for future technical innovations and cost reduction potential based on current R&D activities, ongoing commercial developments and growth in market scale. The derived levelized cost of electricity (LCOE) for 2015 and 2025 are finally contrasted with published power purchase agreements (PPA) of the NOOR II+III power plants in Morocco. At 7.5% weighted average cost of capital (WACC) and 25 years economic life time, the levelized costs of electricity for plants with 7.5 (trough) respectively 9 (tower) full-load hours thermal storage capacity decrease from 14-15 -ct/kWh today to 9-10 -ct/kWh by 2025 for both technologies at direct normal irradiation of 2500 kWh/(m².a). The capacity factor increases from 41.1% to 44.6% for troughs and from 45.5% to 49.0% for towers. Financing conditions are a major cost driver and offer potential for further cost reduction with the maturity of the technology and low interest rates (6-7 - ct/kWh for 2% WACC at 2500 kWh/(m2.a) in 2025).
Multiple-Panel Cylindrical Solar Concentrator
NASA Technical Reports Server (NTRS)
Brown, E. M.
1983-01-01
Trough composed of many panels concentrates Sun's energy on solar cells, even when trough is not pointed directly at Sun. Tolerates deviation as great as 5 degrees from direction of sun. For terrestrial applications, multiple-flat-plate design offers potential cost reduction and ease of fabrication.
Iannazzo, Sergio; Cortesi, Paolo A; Crea, Roberto; Steinitz, Katharina; Mantovani, Lorenzo G; Gringeri, Alessandro
2017-09-01
: The objective of this study was to assess the cost-effectiveness of pharmacokinetic-driven prophylaxis in severe haemophilia A patients. A microsimulation model was developed to evaluate the cost-effectiveness of pharmacokinetic-driven prophylaxis vs. standard prophylaxis and estimate cost, annual joint bleed rate (AJBR), and incremental cost-effectiveness ratio over a 1-year time horizon for a hypothetical population of 10 000 severe haemophilia A patients. A dose of 30 IU/kg per 48 h was assumed for standard prophylaxis. Pharmacokinetic prophylaxis was individually adjusted to maintain trough levels at least 1 and 5 IU/dl or less. AJBR was estimated on the relationship between factor VIII (FVIII) levels and bleeding rate reported in the literature. Sensitivity analyses were performed to assess the stability of the model and the reliability of results. The FVIII dose was reduced in the 27.8% of patients with a trough level more than 5 IU/dl on standard prophylaxis, with a negligible impact on AJBR (+0.1 bleed/year). The FVIII dose was increased in the 10.6% of patients with trough levels less than 1 IU/dl on standard prophylaxis, with a significant reduction of AJBR (-1.9 bleeds/year). On average, overall, pharmacokinetic-driven prophylaxis was shown to decrease the AJBR from 1.012 to 0.845 with a slight reduction of the infusion dose of 0.36 IU/kg, with total saving of 5 197&OV0556; per patient-year. Pharmacokinetic-driven prophylaxis was preferable (i.e. more effective and less costly) compared with standard prophylaxis, with savings of 31 205&OV0556; per bleed avoided. Pharmacokinetic-driven prophylaxis, accounting for patients' individual pharmacokinetic variability, appears to be a promising strategy to improve outcomes with efficient use of available resources in severe haemophilia A patients.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Turchi, Craig; Kurup, Parthiv; Akar, Sertac
This study lists material composition data for two concentrating solar power (CSP) plant designs: a molten-salt power tower and a hypothetical parabolic trough plant, both of which employ a molten salt for the heat transfer fluid (HTF) and thermal storage media. The two designs have equivalent generating and thermal energy storage capacities. The material content of the saltHTF trough plant was approximately 25% lower than a comparably sized conventional oil-HTF parabolic trough plant. The significant reduction in oil, salt, metal, and insulation mass by switching to a salt-HTF design is expected to reduce the capital cost and LCOE for themore » parabolic trough system.« less
Systematic conversion to generic tacrolimus in stable kidney transplant recipients.
Rosenborg, Staffan; Nordström, Annica; Almquist, Tora; Wennberg, Lars; Bárány, Peter
2014-04-01
Tacrolimus (Prograf ® ) is a key drug in the immunosuppressive treatment of renal transplant patients. Since the expiration of the patent for Prograf ® , generic preparations have been approved in Europe as bioequivalence has been shown in healthy volunteers. However, few studies have investigated whether patients can be successfully converted from Prograf ® to generic tacrolimus. Tacrolimus drug costs are by far the largest single item in the total drug expenditure for patients with renal disease in the Stockholm area. Considerable reductions in drug costs could be achieved if generic tacrolimus were to be used. The aim of this quality assurance study was to evaluate whether a switch from Prograf ® to generic tacrolimus (Tacrolimus Sandoz ® ) could be safely performed in renal transplant patients. It further aimed to investigate changes of renal function (measured in estimated glomerular filtration rate, eGFR), need for dose changes and to calculate potential drug cost savings as a result of the conversion. We planned to recruit at least 50 patients. Plasma creatinine levels and trough concentrations of tacrolimus were collected from patients with renal transplants at three occasions during treatment with Prograf ® and three times after conversion to Tacrolimus Sandoz ® . The eGFR was calculated before and after the conversion. Sixty-three of 67 enrolled patients (69% males, age 28-80 years) are included in this analysis. The ratio of mean trough concentrations of tacrolimus after comparison with before conversion was 1.02 (90% confidence interval 0.95-1.09). Fourteen patients experienced a change in tacrolimus levels >20% compared with baseline, no patients changed >20% in eGFR. The drug cost saving per daily dose was 33.40 SEK (∼€3.60, -23%). Stable kidney transplant patients treated with Prograf ® can be converted to Tacrolimus Sandoz ® if trough concentrations of tacrolimus and plasma creatinine levels are closely monitored. The conversion brought savings, despite costs for extra monitoring.
Systematic conversion to generic tacrolimus in stable kidney transplant recipients
Rosenborg, Staffan; Nordström, Annica; Almquist, Tora; Wennberg, Lars; Bárány, Peter
2014-01-01
Background Tacrolimus (Prograf®) is a key drug in the immunosuppressive treatment of renal transplant patients. Since the expiration of the patent for Prograf®, generic preparations have been approved in Europe as bioequivalence has been shown in healthy volunteers. However, few studies have investigated whether patients can be successfully converted from Prograf® to generic tacrolimus. Tacrolimus drug costs are by far the largest single item in the total drug expenditure for patients with renal disease in the Stockholm area. Considerable reductions in drug costs could be achieved if generic tacrolimus were to be used. The aim of this quality assurance study was to evaluate whether a switch from Prograf® to generic tacrolimus (Tacrolimus Sandoz®) could be safely performed in renal transplant patients. It further aimed to investigate changes of renal function (measured in estimated glomerular filtration rate, eGFR), need for dose changes and to calculate potential drug cost savings as a result of the conversion. Methods We planned to recruit at least 50 patients. Plasma creatinine levels and trough concentrations of tacrolimus were collected from patients with renal transplants at three occasions during treatment with Prograf® and three times after conversion to Tacrolimus Sandoz®. The eGFR was calculated before and after the conversion. Results Sixty-three of 67 enrolled patients (69% males, age 28–80 years) are included in this analysis. The ratio of mean trough concentrations of tacrolimus after comparison with before conversion was 1.02 (90% confidence interval 0.95–1.09). Fourteen patients experienced a change in tacrolimus levels >20% compared with baseline, no patients changed >20% in eGFR. The drug cost saving per daily dose was 33.40 SEK (∼€3.60, −23%). Conclusions Stable kidney transplant patients treated with Prograf® can be converted to Tacrolimus Sandoz® if trough concentrations of tacrolimus and plasma creatinine levels are closely monitored. The conversion brought savings, despite costs for extra monitoring. PMID:24944783
Xu, Guoying; Chen, Wei; Deng, Shiming; Zhang, Xiaosong; Zhao, Sainan
2015-01-01
Application of solar collectors for hot water supply, space heating, and cooling plays a significant role in reducing building energy consumption. For conventional solar collectors, solar radiation is absorbed by spectral selective coating on the collectors’ tube/plate wall. The poor durability of the coating can lead to an increased manufacturing cost and unreliability for a solar collector operated at a higher temperature. Therefore, a novel nanofluid-based direct absorption solar collector (NDASC) employing uncoated collector tubes has been proposed, and its operating characteristics for medium-temperature solar collection were theoretically and experimentally studied in this paper. CuO/oil nanofluid was prepared and used as working fluid of the NDASC. The heat-transfer mechanism of the NDASC with parabolic trough concentrator was theoretically evaluated and compared with a conventional indirect absorption solar collector (IASC). The theoretical analysis results suggested that the fluid’s temperature distribution in the NDASC was much more uniform than that in the IASC, and an enhanced collection efficiency could be achieved for the NDASC operated within a preferred working temperature range. To demonstrate the feasibility of the proposed NDASC, experimental performances of an NDASC and an IASC with the same parabolic trough concentrator were furthermore evaluated and comparatively discussed. PMID:28347112
Xu, Guoying; Chen, Wei; Deng, Shiming; Zhang, Xiaosong; Zhao, Sainan
2015-12-04
Application of solar collectors for hot water supply, space heating, and cooling plays a significant role in reducing building energy consumption. For conventional solar collectors, solar radiation is absorbed by spectral selective coating on the collectors' tube/plate wall. The poor durability of the coating can lead to an increased manufacturing cost and unreliability for a solar collector operated at a higher temperature. Therefore, a novel nanofluid-based direct absorption solar collector (NDASC) employing uncoated collector tubes has been proposed, and its operating characteristics for medium-temperature solar collection were theoretically and experimentally studied in this paper. CuO/oil nanofluid was prepared and used as working fluid of the NDASC. The heat-transfer mechanism of the NDASC with parabolic trough concentrator was theoretically evaluated and compared with a conventional indirect absorption solar collector (IASC). The theoretical analysis results suggested that the fluid's temperature distribution in the NDASC was much more uniform than that in the IASC, and an enhanced collection efficiency could be achieved for the NDASC operated within a preferred working temperature range. To demonstrate the feasibility of the proposed NDASC, experimental performances of an NDASC and an IASC with the same parabolic trough concentrator were furthermore evaluated and comparatively discussed.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mehos, Mark; Turchi, Craig; Jorgensen, Jennie
2016-03-01
Since the SunShot Vision Study (DOE 2012) was published, global deployment of concentrating solar power (CSP) has increased threefold to nearly 4,500 MW, with a similar threefold increase in operational capacity to 1,650 MW within the United States. Growth in U.S. CSP capacity has primarily been driven by policy support at the state and federal levels. State-driven renewable portfolio standards (RPSs), combined with a 30% federal investment tax credit (ITC) and federal loan guarantees, provided the opportunity for CSP developers to kick-start construction of CSP plants throughout the Southwest. Figure ES-1 demonstrates that deployment and private- and public-sector research andmore » development have led to dramatic cost reductions that have placed CSP well on the path to reaching the U.S. Department of Energy’s SunShot Initiative goal of 6 cents/kWh by 2020. In comparing the estimated capital costs from the SunShot Vision Study and the current analysis, we find that parabolic trough solar-field costs have fallen more rapidly than predicted, although the drop in solar-field costs was offset by the additional costs of moving from a wet-cooled power block in 2010 to a more expensive dry-cooled power block in 2015. The predicted 2015 decline in tower costs was in line with expectations, primarily driven by reduced heliostat costs. Figure ES-1 shows the reduction in levelized cost of electricity (LCOE) for both parabolic trough and tower systems, in addition to the projected 2020 SunShot target.« less
Technical Manual for the SAM Physical Trough Model
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wagner, M. J.; Gilman, P.
2011-06-01
NREL, in conjunction with Sandia National Lab and the U.S Department of Energy, developed the System Advisor Model (SAM) analysis tool for renewable energy system performance and economic analysis. This paper documents the technical background and engineering formulation for one of SAM's two parabolic trough system models in SAM. The Physical Trough model calculates performance relationships based on physical first principles where possible, allowing the modeler to predict electricity production for a wider range of component geometries than is possible in the Empirical Trough model. This document describes the major parabolic trough plant subsystems in detail including the solar field,more » power block, thermal storage, piping, auxiliary heating, and control systems. This model makes use of both existing subsystem performance modeling approaches, and new approaches developed specifically for SAM.« less
Low-Cost, Light Weight, Thin Film Solar Concentrator
NASA Technical Reports Server (NTRS)
Ganapathi, G.; Palisoc, A.; Nesmith, B.; Greschik, G.; Gidanian, K.; Kindler, A.
2013-01-01
This research addresses a cost barrier towards achieving a solar thermal collector system with an installed cost of $75/sq m and meet the Department of Energy's (DOE's) performance targets for optical errors, operations during windy conditions and lifetime. Current concentrators can cost as much as 40-50% of the total installed costs for a CSP plant. In order to reduce the costs from current $200-$250/sq m, it is important to focus on the overall system. The reflector surface is a key cost driver, and our film-based polymer reflector will help significantly in achieving DOE's cost target of $75/sq m. The ease of manufacturability, installation and replacement make this technology a compelling one to develop. This technology can be easily modified for a variety of CSP options including heliostats, parabolic dishes and parabolic troughs.
Low-cost small scale parabolic trough collector design for manufacturing and deployment in Africa
NASA Astrophysics Data System (ADS)
Orosz, Matthew; Mathaha, Paul; Tsiu, Anadola; Taele, B. M.; Mabea, Lengeta; Ntee, Marcel; Khakanyo, Makoanyane; Teker, Tamer; Stephens, Jordan; Mueller, Amy
2016-05-01
Concentrating Solar Power is expanding its deployment on the African subcontinent, highlighting the importance of efforts to indigenize manufacturing of this technology to increase local content and therefore local economic benefits of these projects. In this study a design for manufacturing (DFM) exercise was conducted to create a locally produced parabolic trough collector (the G4 PTC). All parts were sourced or fabricated at a production facility in Lesotho, and several examples of the design were prototyped and tested with collaborators in the Government of Lesotho's Appropriate Technology Services division and the National University of Lesotho. Optical and thermal performance was simulated and experimentally validated, and pedagogical pre-commercial versions of the PTC have been distributed to higher education partners in Lesotho and Europe. The cost to produce the PTC is 180 USD/m2 for a locally manufactured heat collection element (HCE) capable of sustaining 250C operation at ~65% efficiency. A version with an imported evacuated HCE can operate at 300°C with 70% efficiency. Economically relevant applications for this locally produced PTC include industrial process heat and distributed generation scenarios where cogeneration is required.
NASA Astrophysics Data System (ADS)
Feliciano-Cruz, Luisa I.
The increasing fossil fuel costs as well as the need to move in a somewhat sustainable future has led the world in a quest for exploiting the free and naturally available energy from the Sun to produce electric power, and Puerto Rico is no exception. This thesis proposes the design of a simulation model for the analysis and performance evaluation of a Solar Thermal Power Plant in Puerto Rico and suggests the use of the Compound Parabolic Concentrator as the solar collector of choice. Optical and thermal analysis of such collectors will be made using local solar radiation data for determining the viability of this proposed project in terms of the electric power produced and its cost.
NREL's Education Program in Action in the Concentrating Solar Power Program Advanced Materials Task
NASA Astrophysics Data System (ADS)
Kennedy, Cheryl
2010-03-01
Concentrating solar power (CSP) technologies use large mirrors to concentrate sunlight and the thermal energy collected is converted to electricity. The CSP industry is growing rapidly and is expected to reach 25 GW globally by 2020. Cost target goals are for CSP technologies to produce electricity competitive with intermediate-load power generation (i.e., natural gas) by 2015 with 6 hours of thermal storage and competitive in carbon constrained base load power markets (i.e., coal) by 2020 with 12-17 hours of thermal storage. The solar field contributes more than 40% of the total cost of a parabolic trough plant and together the mirrors and receivers contribute more than 25% of the installed solar field cost. CSP systems cannot hit these targets without aggressive cost reductions and revolutionary performance improvements from technology advances. NREL's Advanced Materials task in the CSP Advanced R&D project performs research to develop low cost, high performance, durable solar reflector and high-temperature receiver materials to meet these needs. The Advanced Materials task leads the world in this research and the task's reliance on NREL's educational program will be discussed.
Molten salt parabolic trough system with synthetic oil preheating
NASA Astrophysics Data System (ADS)
Yuasa, Minoru; Hino, Koichi
2017-06-01
Molten salt parabolic trough system (MSPT), which can heat the heat transfer fluid (HTF) to 550 °C has a better performance than a synthetic oil parabolic trough system (SOPT), which can heat the HTF to 400 °C or less. The utilization of HTF at higher temperature in the parabolic trough system is able to realize the design of a smaller size of storage tank and higher heat to electricity conversion efficiency. However, with MSPT there is a great amount of heat loss at night so it is necessary to circulate the HTF at a high temperature of about 290 °C in order to prevent solidification. A new MSPT concept with SOPT preheating (MSSOPT) has been developed to reduce the heat loss at night. In this paper, the MSSOPT system, its performance by steady state analysis and annual performance analysis are introduced.
USDA-ARS?s Scientific Manuscript database
The “See-Saw” is a vertical-lift incubator that increases water circulation around and through channel catfish egg masses. Baskets in the incubator move up and down on racks in conventional hatchery troughs, raising the rack in one trough while lowering the rack in the adjacent trough. Egg masses ...
State-of-the-Art Review of Low-Cost Collector Technologies
1981-06-01
Mobility Low-Cost Parabolic Trough Survivability Light-Weight Thin-Film Reliability Heliostats Polymers Military 20. ABSTRACT (Contine an revers. deo It... heliostats and parabolic dish collectors. In addition several criteria were evaluated with respect to low-cost collector technologies These included...has produced collectors which incorporate sophisticated materials, = Heliostat heavy components, expensive seals and compli- o- (Point Focus) cated
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
The Performance Prototype Trough (PPT) Concentrating Collector consists of four 80-foot modules in a 320-foot row. The collector was analyzed, including cost estimates and manufacturing processes to produce collectors in volumes from 100 to 100,000 modules per year. The four different reflector concepts considered were the sandwich reflector structure, sheet metal reflector structure, molded reflector structure, and glass laminate structure. The sheet metal and glass laminate structures are emphasized with their related structure concepts. A preliminary manufacturing plan is offered that includes: documentation of the manufacturing process with production flow diagrams; labor and material costs at various production levels; machinerymore » and equipment requirements including preliminary design specifications; and capital investment costs for a new plant. Of five reflector designs considered, the two judged best and considered at length are thin annealed glass and steel laminate on steel frame panel and thermally sagged glass. Also discussed are market considerations, costing and selling price estimates, design cost analysis and make/buy analysis. (LEW)« less
NASA Astrophysics Data System (ADS)
Reddy, K. S.; Singla, Hitesh
2017-07-01
In the present work, structural analysis of 5.77m × 4m woven jute (J)/glass (G) fibre-reinforced polyester hybrid composite solar parabolic trough is carried out based on trough parameters to obtain the minimum RMS local slope deviation, termed as SDx value under gravity loading. The optimization is done by varying parameters viz. direction and size of reinforced conduits, stacking number and sequence of hybrid trough laminate at fibre orientation of Δθ=45° and Δθ=60° amongst the layers at 0° collector angle. The analysis revealed that the configuration in which the conduits are placed in both X and Y directions is preferred over other configurations to scale down the effect of wind loads. Furthermore it has been observed that laminate of the order [0°G/45°G/-45°J/90°J]s undergoes minimum surface deformation amongst all the other configurations at conduit reinforcement in both X and Y directions for a conduit thickness of 0.75 mm and radius of 10 mm and obtains the overall SDx value of 1.3492 mrad. The results shows that proposed trough model is very promising and evolves a cost effective system.
NASA Astrophysics Data System (ADS)
Yasuda, K.; Tadokoro, K.; Ikuta, R.; Watanabe, T.; Fujii, C.; Matsuhiro, K.; Sayanagi, K.
2014-12-01
Seafloor crustal deformation is crucial for estimating the interplate locking at the shallow subduction zone and has been carried out at subduction margins in Japan, e.g., Japan Trench and Nankai Trough [Sato et al., 2011; Tadokoro et al., 2012]. Iinuma et al. [2012] derived slip distributions during the 2011 Tohoku-Oki earthquake using GPS/Acoustic data and on-land GPS data. The result showed that maximum slip is more than 85 m near the trench axis. The focal area along the Nankai trough extended to the trough axis affected this earthquake by cabinet office, government of Japan. We monitored seafloor crustal deformation along the Nankai trough, Japan. Observation regions are at the eastern end of Nankai trough (named Suruga trough) and at the central Nankai trough. We established and monitored by two sites across the trough at each region. In the Suruga trough region, we repeatedly observed from 2005 to 2013. We observed 13 and 14 times at a foot wall side (SNE) and at a hanging wall side (SNW), respectively. We estimated the displacement velocities with relative to the Amurian plate from the result of repeated observation. The estimated displacement velocity vectors at SNE and SNW are 42±8 mm/y to N94±3˚W direction and 39±11 mm/y to N84±9˚W direction, respectively. The directions are the same as those measured at the on-land GPS stations. The magnitudes of velocity vector indicate significant shortening by approximately 4 mm/y between SNW and on-land GPS stations at hanging wall side of the Suruga Trough. This result shows that the plate interface at the northernmost Suruga trough is strongly locked. In the central Nankai trough region, we established new two stations across the central Nankai trough (Both stations are about 15km distance from trough) and observed only three times, August 2013, January 2014, and June 2014. We report the results of monitoring performed in this year.
NASA Astrophysics Data System (ADS)
Muhlen, Luis S. W.; Najafi, Behzad; Rinaldi, Fabio; Marchesi, Renzo
2014-04-01
Solar troughs are amongst the most commonly used technologies for collecting solar thermal energy and any attempt to increase the performance of these systems is welcomed. In the present study a parabolic solar trough is simulated using a one dimensional finite element model in which the energy balances for the fluid, the absorber and the envelope in each element are performed. The developed model is then validated using the available experimental data . A sensitivity analysis is performed in the next step in order to study the effect of changing the type of the working fluid and the corresponding Reynolds number on the overall performance of the system. The potential improvement due to the addition of a shield on the upper half of the annulus and enhancing the convection coefficient of the heat transfer fluid is also studied.
Full parabolic trough qualification from prototype to demonstration loop
NASA Astrophysics Data System (ADS)
Janotte, Nicole; Lüpfert, Eckhard; Pottler, Klaus; Schmitz, Mark
2017-06-01
On the example of the HelioTrough® collector development the full accompanying and supporting qualification program for large-scale parabolic trough collectors for solar thermal power plants is described from prototype to demonstration loop scale. In the evaluation process the actual state and the optimization potential are assessed. This includes the optical and geometrical performance determined by concentrator shape, deformation, assembly quality and local intercept factor values. Furthermore, its mechanical performance in terms of tracking accuracy and torsional stiffness and its thermal system performance on the basis of the overall thermal output and heat loss are evaluated. Demonstration loop tests deliver results of collector modules statistical slope deviation of 1.9 to 2.6 mrad, intercept factor above 98%, peak optical performance of 81.6% and heat loss coefficients from field tests. The benefit of such a closely monitored development lies in prompt feedback on strengths, weaknesses and potential improvements on the new product at any development stage from first module tests until demonstration loop evaluation. The product developer takes advantage of the achieved technical maturity, already before the implementation in a commercial power plant. The well-understood performance characteristics allow the reduction of safety margins making the new HelioTrough collector competitive from the start.
NASA Technical Reports Server (NTRS)
Clarke, V. C., Jr.
1977-01-01
Solar collectors on mountainside collect thermal energy for mountaintop powerplant. Sloped arrangement reduces heat-transport problem of level ground-based collector field. Heated air rises without mechanical pumps and buoyancy force supplies pumping power without further cost. Precision tracking requirement of power towers eliminated by butted-together Winston-type concentrator troughs. Low-cost native rock is used for heat storage.
Obara, Vitor Yuzo; Zacas, Carolina Petrus; Carrilho, Claudia Maria Dantas de Maio; Delfino, Vinicius Daher Alvares
2016-01-01
This study aimed to assess whether currently used dosages of vancomycin for treatment of serious gram-positive bacterial infections in intensive care unit patients provided initial therapeutic vancomycin trough levels and to examine possible factors associated with the presence of adequate initial vancomycin trough levels in these patients. A prospective descriptive study with convenience sampling was performed. Nursing note and medical record data were collected from September 2013 to July 2014 for patients who met inclusion criteria. Eighty-three patients were included. Initial vancomycin trough levels were obtained immediately before vancomycin fourth dose. Acute kidney injury was defined as an increase of at least 0.3mg/dL in serum creatinine within 48 hours. Considering vancomycin trough levels recommended for serious gram-positive infection treatment (15 - 20µg/mL), patients were categorized as presenting with low, adequate, and high vancomycin trough levels (35 [42.2%], 18 [21.7%], and 30 [36.1%] patients, respectively). Acute kidney injury patients had significantly greater vancomycin trough levels (p = 0.0055, with significance for a trend, p = 0.0023). Surprisingly, more than 40% of the patients did not reach an effective initial vancomycin trough level. Studies on pharmacokinetic and dosage regimens of vancomycin in intensive care unit patients are necessary to circumvent this high proportion of failures to obtain adequate initial vancomycin trough levels. Vancomycin use without trough serum level monitoring in critically ill patients should be discouraged.
NASA Astrophysics Data System (ADS)
Kuckelkorn, Thomas; Jung, Christian; Gnädig, Tim; Lang, Christoph; Schall, Christina
2016-05-01
The ageing of diphenyl oxide/ biphenyl (DPO/BP) Heat Transfer Fluids (HTFs) implies challenging tasks for operators of parabolic trough power plants in order to find the economic optimum between plant performance and O&M costs. Focusing on the generation of hydrogen, which is effecting from the HTF ageing process, the balance of hydrogen pressure in the HTF is simulated for different operation scenarios. Accelerated build-up of hydrogen pressure in the HTF is causing increased permeation into the annular vacuum space of the installed receivers and must be avoided in order to maintain the performance of these components. Therefore, the effective hydrogen partial pressure in the HTF has to be controlled and limited according to the specified values so that the vacuum lifetime of the receivers and the overall plant performance can be ensured. In order to simulate and visualize the hydrogen balance of a typical parabolic trough plant, initially a simple model is used to calculate the balance of hydrogen in the system and this is described. As input data for the simulation, extrapolated hydrogen generation rates have been used, which were calculated from results of lab tests performed by DLR in Cologne, Germany. Hourly weather data, surface temperatures of the tubing system calculated by using the simulation tool from NREL, and hydrogen permeation rates for stainless steel and carbon steel grades taken from literature have been added to the model. In a first step the effect of HTF ageing, build-up of hydrogen pressure in the HTF and hydrogen loss rates through piping and receiver components have been modeled. In a second step a selective hydrogen removal process has been added to the model. The simulation results are confirming the need of active monitoring and controlling the effective hydrogen partial pressure in parabolic trough solar thermal power plants with DPO/BP HTF. Following the results of the simulation, the expected plant performance can only be achieved over lifetime, if the hydrogen partial pressure is actively controlled and limited.
Seasonal variation and solar activity dependence of the quiet-time ionospheric trough
NASA Astrophysics Data System (ADS)
Ishida, T.; Ogawa, Y.; Kadokura, A.; Hiraki, Y.; Häggström, I.
2014-08-01
We have conducted a statistical analysis of the ionospheric F region trough, focusing on its seasonal variation and solar activity dependence under geomagnetically quiet and moderate conditions, using plasma parameter data obtained via Common Program 3 observations performed by the European Incoherent Scatter (EISCAT) radar between 1982 and 2011. We have confirmed that there is a major difference in frictional heating between the high- and low-latitude sides of the EISCAT field of view (FOV) at ~73°0'N-60°5'N (geomagnetic latitude) at an altitude of 325 km, which is associated with trough formation. Our statistical results show that the high-latitude and midlatitude troughs occur on the high- and low-latitude sides of the FOV, respectively. Seasonal variations indicate that dissociative recombination accompanied by frictional heating is a main cause of trough formation in sunlit regions. During summer, therefore, the occurrence rate is maintained at 80-90% in the postmidnight high-latitude region owing to frictional heating by eastward return flow. Solar activity dependence on trough formation indicates that field-aligned currents modulate the occurrence rate of the trough during the winter and equinox seasons. In addition, the trough becomes deeper via dissociative recombination caused by an increased ion temperature with F10.7, at least in the equinox and summer seasons but not in winter.
Nonparabolic solar concentrators matching the parabola.
Cooper, Thomas; Schmitz, Max; Good, Philipp; Ambrosetti, Gianluca; Pedretti, Andrea; Steinfeld, Aldo
2014-08-01
We consider the limit of geometric concentration for a focusing concave mirror, e.g., a parabolic trough or dish, designed to collect all radiation within a finite acceptance angle and direct it to a receiver with a flat or circular cross-section. While a concentrator with a parabolic cross-section indeed achieves this limit, it is not the only geometry capable of doing so. We demonstrate that there are infinitely many solutions. The significance of this finding is that geometries which can be more easily constructed than the parabola can be utilized without loss of concentration, thus presenting new avenues for reducing the cost of solar collectors. In particular, we investigate a low-cost trough mirror profile which can be constructed by inflating a stack of thin polymer membranes and show how it can always be designed to match the geometric concentration of a parabola of similar form.
NREL Research Garners Three Prestigious R&D 100 Awards | News | NREL
, SkyFuel, to create a ground-breaking and low-cost system for utility-sized power generation. The SkyTrough installation costs into competition with gas-fired power plants. NREL shares this award with SkyFuel, Inc. NREL -film lithium microbattery. Its ideal applications are remote wireless sensors, smart homes, smart cars
Improvement Design of Parabolic Trough
NASA Astrophysics Data System (ADS)
Ihsan, S. I.; Safian, M. A. I. M.; Taufek, M. A. M.; Mohiuddin, A. K. M.
2017-03-01
The performance of parabolic trough solar collector (PTSC) has been evaluated using different heat transfer working fluids; namely water and SAE20 W50 engine oil. New and slightly improved PTSC was developed to run the experimental study. Under the meteorological conditions of Malaysia, authors found that PTSC can operate at a higher temperature than water collector but the performance efficiency of collector using engine oil is much lower than the water collector.
Therapeutic drug monitoring of eculizumab: Rationale for an individualized dosing schedule.
Gatault, Philippe; Brachet, Guillaume; Ternant, David; Degenne, Danielle; Récipon, Guillaume; Barbet, Christelle; Gyan, Emmanuel; Gouilleux-Gruart, Valérie; Bordes, Cécile; Farrell, Alexandra; Halimi, Jean Michel; Watier, Hervé
2015-01-01
The annual cost of eculizumab maintenance therapy in paroxysmal nocturnal hemoglobinuria (PNH) and atypical hemolytic-uremic syndrome (aHUS) exceeds $300,000 per patient. A better understanding of eculizumab pharmacokinetics and subsequent individual dose adjustment could reduce this cost. We measured the trough eculizumab concentration in 9 patients with maintenance therapy (aHUS, n = 7; PNH, n = 2) and determined: 1) the intra- and inter-individual variability; 2) the influence of weight on eculizumab pharmacokinetics; and 3) the rate of elimination of eculizumab following discontinuation. A one-compartment model was developed to describe the pharmacokinetics of eculizumab and predicted complement activity by body weight. Trough eculizumab concentrations were >50 µg/mL in 9/9, >100 µg/mL in 8/9, and >300 µg/mL in 5/9 of patients. Intra-individual variability was low but eculizumab concentrations, closely correlated with patient weight (R(2) = 0.66, p = 0.034), varied broadly (55 ± 12 to 733 ± 164 µg/mL). Pharmacokinetic modeling showed that the elimination half-life varied greatly, with an increase from 7.8 d in a patient weighing 100 kg to 19.5 d in a 40 kg patient. We predicted that infusions of 1200 mg could be spaced every 4 or 6 weeks in patients weighing <90 and <70 kg, respectively. In this pilot study, the current recommended use of a fixed eculizumab dose for maintenance therapy is associated with excessively high trough concentrations in many patients. Further prospective larger studies are now required to support an individualized schedule adjusted for patient weight and based on the observed trough serum eculizumab concentration.
Therapeutic drug monitoring of eculizumab: Rationale for an individualized dosing schedule
Gatault, Philippe; Brachet, Guillaume; Ternant, David; Degenne, Danielle; Récipon, Guillaume; Barbet, Christelle; Gyan, Emmanuel; Gouilleux-Gruart, Valérie; Bordes, Cécile; Farrell, Alexandra; Halimi, Jean Michel; Watier, Hervé
2015-01-01
The annual cost of eculizumab maintenance therapy in paroxysmal nocturnal hemoglobinuria (PNH) and atypical hemolytic–uremic syndrome (aHUS) exceeds $300,000 per patient. A better understanding of eculizumab pharmacokinetics and subsequent individual dose adjustment could reduce this cost. We measured the trough eculizumab concentration in 9 patients with maintenance therapy (aHUS, n = 7; PNH, n = 2) and determined: 1) the intra- and inter-individual variability; 2) the influence of weight on eculizumab pharmacokinetics; and 3) the rate of elimination of eculizumab following discontinuation. A one-compartment model was developed to describe the pharmacokinetics of eculizumab and predicted complement activity by body weight. Trough eculizumab concentrations were >50 µg/mL in 9/9, >100 µg/mL in 8/9, and >300 µg/mL in 5/9 of patients. Intra-individual variability was low but eculizumab concentrations, closely correlated with patient weight (R2 = 0.66, p = 0.034), varied broadly (55 ± 12 to 733 ± 164 µg/mL). Pharmacokinetic modeling showed that the elimination half-life varied greatly, with an increase from 7.8 d in a patient weighing 100 kg to 19.5 d in a 40 kg patient. We predicted that infusions of 1200 mg could be spaced every 4 or 6 weeks in patients weighing <90 and <70 kg, respectively. In this pilot study, the current recommended use of a fixed eculizumab dose for maintenance therapy is associated with excessively high trough concentrations in many patients. Further prospective larger studies are now required to support an individualized schedule adjusted for patient weight and based on the observed trough serum eculizumab concentration. PMID:26337866
Bond, Ashley; Dodd, Susanna; Fisher, Gareth; Skouras, Thomas; Subramanian, Sreedhar
2017-02-01
Combination therapy with infliximab and immunomodulators is superior to monotherapy, resulting in better outcomes and higher trough levels of infliximab. The role of concurrent immunomodulatory therapy on adalimumab trough levels has not been adequately investigated. We evaluated the impact of concomitant immunomodulation on adalimumab trough levels in patients on scheduled maintenance therapy. We conducted a prospective observational, cross-sectional study of all inflammatory bowel disease patients on maintenance therapy who had adalimumab trough levels measured between January 2013 and January 2016. Drug level and anti-drug antibody measurements were performed on sera using a solid phase assay. Pairwise comparison of means was used to compare trough levels in patients with and without concomitant immune modulator therapy. In total, 79 patients were included. Twenty-three patients (29.1%) were on weekly dosing whereas 56 (70.9%) were on alternate weeks. Median adalimumab trough levels were comparable in patients with and without clinical remission (6.8 μg/ml (IQR 5.6-8.1) versus 6.7 μg/ml (IQR 3.9-8.1), respectively. Patients with an elevated faecal calprotectin >250 μg/g had lower adalimumab trough levels (median 6.7, IQR 3.9-8) compared to patients with faecal calprotectin <250 μg/g (median 7.7, IQR 6.1-8.1) though this did not achieve statistical significance (p = .062). Median adalimumab trough levels among patients on concurrent immunomodulators was 7.2 μg/ml (IQR 5.7-8.1) compared to those not on concurrent immunomodulator, 6.1 μg/ml (IQR 2.7-7.7, p = .0297). Adalimumab trough levels were significantly higher in patients on concurrent immunomodulators during maintenance therapy. There was a trend towards a lower adalimumab trough level in patients with elevated calprotectin.
Concentrating Solar Power Projects - City of Medicine Hat ISCC Project |
trough Turbine Capacity: Net: 1.1 MW Gross: 1.1 MW Status: Operational Start Year: 2014 Do you have more Start Production: November 2014 Cost (approx): 9 $ million Project Type: ISCC Demonstration Participants
Concentrating Solar Power Projects - Megha Solar Plant | Concentrating
: Parabolic trough Turbine Capacity: Net: 50.0 MW Gross: 50.0 MW Status: Operational Start Year: 2014 Do you /Planned) Contact(s): Webmaster Solar Break Ground: December 2011 Start Production: November 13, 2014 Cost
Comparative performance of solar thermal power generation concepts
NASA Technical Reports Server (NTRS)
Wen, L.; Wu, Y. C.
1976-01-01
A performance comparison is made between the central receiver system (power tower) and a distributed system using either dishes or troughs and lines to transport fluids to the power station. These systems were analyzed at a rated capacity of 30 MW of thermal energy delivered in the form of superheated steam at 538 C (1000 F) and 68 atm (1000 psia), using consistent weather data, collector surface waviness, pointing error, and electric conversion efficiency. The comparisons include technical considerations for component requirements, land utilization, and annual thermal energy collection rates. The relative merits of different representative systems are dependent upon the overall conversion as expressed in the form of performance factors in this paper. These factors are essentially indices of the relative performance effectiveness for different concepts based upon unit collector area. These performance factors enable further economic tradeoff studies of systems to be made by comparing them with projected production costs for these systems.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bolinger, Mark; Seel, Joachim
2015-09-01
Other than the nine Solar Energy Generation Systems (“SEGS”) parabolic trough projects built in the 1980s, virtually no large-scale or “utility-scale” solar projects – defined here to include any groundmounted photovoltaic (“PV”), concentrating photovoltaic (“CPV”), or concentrating solar thermal power (“CSP”) project larger than 5 MW AC – existed in the United States prior to 2007. By 2012 – just five years later – utility-scale had become the largest sector of the overall PV market in the United States, a distinction that was repeated in both 2013 and 2014 and that is expected to continue for at least the nextmore » few years. Over this same short period, CSP also experienced a bit of a renaissance in the United States, with a number of large new parabolic trough and power tower systems – some including thermal storage – achieving commercial operation. With this critical mass of new utility-scale projects now online and in some cases having operated for a number of years (generating not only electricity, but also empirical data that can be mined), the rapidly growing utility-scale sector is ripe for analysis. This report, the third edition in an ongoing annual series, meets this need through in-depth, annually updated, data-driven analysis of not just installed project costs or prices – i.e., the traditional realm of solar economics analyses – but also operating costs, capacity factors, and power purchase agreement (“PPA”) prices from a large sample of utility-scale solar projects in the United States. Given its current dominance in the market, utility-scale PV also dominates much of this report, though data from CPV and CSP projects are presented where appropriate.« less
Line-focus concentrating collector program
NASA Technical Reports Server (NTRS)
Dugan, V. L.
1980-01-01
The Line-Focus Concentrating Collector Program has emphasized the development and dissemination of concentrating solar technology in which the reflected sunlight is focused onto a linear or line receiver. Although a number of different types of line-focus concentrators were developed, the parabolic trough has gained the widest acceptance and utilization within the industrial and applications sectors. The trough is best applied for application scenarios which require temperatures between 140 and 600 F. Another concept, the bowl, is investigated for applications which may require temperatures in the range between 600 and 1200 F. Current technology emphases are upon the reduction of system installation cost and the implementation of production oriented engineering.
A vacuum tube vee-trough collector for solar heating and air conditioning applications
NASA Technical Reports Server (NTRS)
Selcuk, M. K.
1978-01-01
An analysis is conducted of the performance of a vee-trough vacuum tube collector proposed for use in solar heating and cooling applications. The vee-trough reflector is a triangular sectioned, flat surfaced reflector, whose axis is laid in the East-West direction. A vacuum tube receiver placed at the bottom of the vee-trough collects solar heat most efficiently since convection is completely eliminated. Radiation losses are reduced by use of selective coatings on the absorber. Owing to its high temperature capabilities (300-400 F), the proposed scheme could also be used for power generation applications in combination with an organic Rankine conversion system. It is especially recommended for unattended pumping stations since the reflectors only require reversal once every six months.
Concentrating Solar Power Projects - Shams 1 | Concentrating Solar Power |
trough Turbine Capacity: Net: 100.0 MW Gross: 100.0 MW Status: Operational Start Year: 2013 Do you have Ground: July 2010 Start Production: March 17, 2013 Cost (approx): 600,000,000 USD PPA/Tariff Type
NREL, SPI Solar and Trimark Optimize Parabolic Trough Receiver Performance
(CSP) plants. Photo of parabolic trough receiver equipment in a laboratory Photo by Dennis Schroeder Receivers in CSP plants take a lot of abuse, from dramatic temperature changes to numerous mechanical conditions can lead to big improvements in the overall efficiency of CSP plants
Allegra, S; Cusato, J; De Francia, S; Arduino, A; Longo, F; Pirro, E; Massano, D; De Nicolò, A; Piga, A; D'Avolio, A
2018-05-22
β-Thalassemia patients develop deficiency in vitamin D absorption and liver hydroxylation, resulting in extremely low calcitriol levels. We explored the role of single-nucleotide polymorphisms (SNPs) involved in vitamin D metabolism, transport and activity on deferasirox pharmacokinetics and outcomes (effectiveness trough levels (C trough ) and the area under the curve (AUC) cutoffs of 20 μg ml -1 and 360 μg ml -1 h -1 , respectively; nonresponse AUC limit of 250 μg ml -1 h -1 ). Ninety-nine β-thalassemic patients were enrolled. Drug plasma C trough and AUC were measured by the high-performance liquid chromatography system coupled with an ultraviolet determination method. Allelic discrimination for VDR, CYP24A1, CYP27B1 and GC gene SNPs was performed by real-time PCR. CYP24A1 22776 TT significantly influenced C min and negatively predicted it in regression analysis. CYP24A1 3999 CC was associated with C trough and C min and was a negative predictor of T max , whereas CYP24A1 8620 GG seemed to have a role in C trough , AUC, t 1/2 and C min , and was an AUC negative predictor factor. Considering treatment outcome, Cdx2 and GC 1296 were retained in regression analysis as AUC efficacy cutoff negative predictors.
NASA Astrophysics Data System (ADS)
Fasquelle, Thomas; Falcoz, Quentin; Neveu, Pierre; Lecat, Florent; Boullet, Nicolas; Flamant, Gilles
2017-06-01
A thermocline thermal energy storage tank consists in using one single tank to store sensible heat. At almost any time, three zones coexist in the tank: a hot fluid zone at the top, a cold fluid zone at the bottom, and an intermediate zone called thermocline. Filling the tank with solid materials enables to reduce cost and to maintain the thermal stratification during stand-by periods. The present paper deals with a 230 kWh experimental thermocline tank that is included into a 150 kWth parabolic trough mini power plant. The heat transfer fluid is a non-pressurized synthetic oil (dibenzyltoluene) that flows through alumina spheres in the storage tank. The solid materials are contained into baskets in order to facilitate their removing and replacement. Thermocouples measure temperature along the center of the cylinder and along its radius. It is therefore possible to study the thermocline behavior thanks to the measured temperature profiles. A typical charge, a typical discharge and a stand-by process are presented and storage performances are discussed. The behavior of the tank in a dynamic system is also considered, by analyzing a typical day of solar production and storage of the energy surplus.
Supersonic burning in separated flow regions
NASA Technical Reports Server (NTRS)
Zumwalt, G. W.
1982-01-01
The trough vortex phenomena is used for combustion of hydrogen in a supersonic air stream. This was done in small sizes suitable for igniters in supersonic combustion ramjets so long as the boundary layer displacement thickness is less than 25% of the trough step height. A simple electric spark, properly positioned, ignites the hydrogen in the trough corner. The resulting flame is self sustaining and reignitable. Hydrogen can be injected at the base wall or immediately upstream of the trough. The hydrogen is introduced at low velocity to permit it to be drawn into the corner vortex system and thus experience a long residence time in the combustion region. The igniters can be placed on a skewed back step for angles at least up to 30 deg. without affecting the igniter performance significantly. Certain metals (platinum, copper) act catalytically to improve ignition.
Simulation of hybrid solar power plants
NASA Astrophysics Data System (ADS)
Dieckmann, Simon; Dersch, Jürgen
2017-06-01
Hybrid solar power plants have the potential to combine advantages of two different technologies at the cost of increased complexity. The present paper shows the potential of the software greenius for the techno-economic evaluation of hybrid solar power plants and discusses two exemplary scenarios. Depreciated Concentrated Solar Power (CSP) plants based on trough technology can be retrofitted with solar towers in order to reach higher steam cycle temperatures and hence efficiencies. Compared to a newly built tower plant the hybridization of a depreciated trough plant causes about 30% lower LCOE reaching 104 /MWh. The second hybrid scenario combines cost-efficient photovoltaics with dispatchable CSP technology. This hybrid plant offers very high capacity factors up to 69% based on 100% load from 8am to 11pm. The LCOE of the hybrid plant are only slightly lower (174 vs. 186 /MWh) compared to the pure CSP plant because the capital expenditure for thermal storage and power block remains the same while the electricity output is much lower.
Performance and Simulation of a Stand-alone Parabolic Trough Solar Thermal Power Plant
NASA Astrophysics Data System (ADS)
Mohammad, S. T.; Al-Kayiem, H. H.; Assadi, M. K.; Gilani, S. I. U. H.; Khlief, A. K.
2018-05-01
In this paper, a Simulink® Thermolib Model has been established for simulation performance evaluation of Stand-alone Parabolic Trough Solar Thermal Power Plant in Universiti Teknologi PETRONAS, Malaysia. This paper proposes a design of 1.2 kW parabolic trough power plant. The model is capable to predict temperatures at any system outlet in the plant, as well as the power output produced. The conditions that are taken into account as input to the model are: local solar radiation and ambient temperatures, which have been measured during the year. Other parameters that have been input to the model are the collector’s sizes, location in terms of latitude and altitude. Lastly, the results are presented in graphical manner to describe the analysed variations of various outputs of the solar fields obtained, and help to predict the performance of the plant. The developed model allows an initial evaluation of the viability and technical feasibility of any similar solar thermal power plant.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Binotti, M.; Zhu, G.; Gray, A.
An analytical approach, as an extension of one newly developed method -- First-principle OPTical Intercept Calculation (FirstOPTIC) -- is proposed to treat the geometrical impact of three-dimensional (3-D) effects on parabolic trough optical performance. The mathematical steps of this analytical approach are presented and implemented numerically as part of the suite of FirstOPTIC code. In addition, the new code has been carefully validated against ray-tracing simulation results and available numerical solutions. This new analytical approach to treating 3-D effects will facilitate further understanding and analysis of the optical performance of trough collectors as a function of incidence angle.
Van Stappen, Vicky; Van Dyck, Delfien; Latomme, Julie; De Bourdeaudhuij, Ilse; Moreno, Luis; Socha, Piotr; Iotova, Violeta; Koletzko, Berthold; Manios, Yannis; Androutsos, Odysseas; Cardon, Greet; De Craemer, Marieke
2018-02-07
This study is part of the ToyBox-study, which is conducted in six European countries (Belgium, Bulgaria, Germany, Greece, Poland and Spain), aiming to develop a cost-effective kindergarten-based, family-involved intervention to prevent overweight and obesity in four- to six-year-old preschool children. In the current study, we aimed to examine and compare preschoolers' step count patterns, across the six European countries. A sample of 3578 preschoolers (mean age: 4.8 ± 0.4) was included. Multilevel analyses were performed to take clustering of measurements into account. Based on the average hourly steps, step count patterns for the six European countries were created for weekdays and weekend days. The step count patterns during weekdays were related to the daily kindergarten schedules. Step count patterns during weekdays showed several significant peaks and troughs ( p < 0.01) and clearly reflected the kindergartens' daily schedules, except for Germany. For example, low numbers of steps were observed during afternoon naptimes and high numbers of steps during recess. In Germany, step count patterns did not show clear peaks and troughs, which can be explained by a less structured kindergarten schedule. On weekend days, differences in step count patterns were observed in the absolute number of steps in the afternoon trough and the period in which the evening peak occurred. Differences in step count patterns across the countries can be explained by differences in (school) policy, lifestyle habits, and culture. Therefore, it might be important to respond to these step count patterns and more specifically to tackle the inactive periods during interventions to promote physical activity in preschoolers.
Van Stappen, Vicky; Latomme, Julie; Moreno, Luis; Socha, Piotr; Iotova, Violeta; Koletzko, Berthold; Manios, Yannis; Androutsos, Odysseas
2018-01-01
This study is part of the ToyBox-study, which is conducted in six European countries (Belgium, Bulgaria, Germany, Greece, Poland and Spain), aiming to develop a cost-effective kindergarten-based, family-involved intervention to prevent overweight and obesity in four- to six-year-old preschool children. In the current study, we aimed to examine and compare preschoolers’ step count patterns, across the six European countries. A sample of 3578 preschoolers (mean age: 4.8 ± 0.4) was included. Multilevel analyses were performed to take clustering of measurements into account. Based on the average hourly steps, step count patterns for the six European countries were created for weekdays and weekend days. The step count patterns during weekdays were related to the daily kindergarten schedules. Step count patterns during weekdays showed several significant peaks and troughs (p < 0.01) and clearly reflected the kindergartens’ daily schedules, except for Germany. For example, low numbers of steps were observed during afternoon naptimes and high numbers of steps during recess. In Germany, step count patterns did not show clear peaks and troughs, which can be explained by a less structured kindergarten schedule. On weekend days, differences in step count patterns were observed in the absolute number of steps in the afternoon trough and the period in which the evening peak occurred. Differences in step count patterns across the countries can be explained by differences in (school) policy, lifestyle habits, and culture. Therefore, it might be important to respond to these step count patterns and more specifically to tackle the inactive periods during interventions to promote physical activity in preschoolers. PMID:29414916
Proceedings of the First Semiannual Distributed Receiver Program Review
NASA Technical Reports Server (NTRS)
1980-01-01
Point focus and line focus distributed receiver solar thermal technology for the production of electric power and of industrial process heat is addressed. Concentrator, receiver, and power conversion development are covered along with hardware tests and evaluation. Mass production costing, parabolic dish applications, and trough and bowl systems are included.
Use of rapid prototyping drill template for the expansive open door laminoplasty: A cadaveric study.
Rong, Xin; Wang, Beiyu; Chen, Hua; Ding, Chen; Deng, Yuxiao; Ma, Lipeng; Ma, Yanzhao; Liu, Hao
2016-11-01
Trough preparation is a technically demanding yet critical procedure for successful expansive open door laminoplasty (EOLP), requiring both proper position and appropriate bone removal. We aimed to use the specific rapid prototyping drill template to achieve such requirement. The 3D model of the cadaveric cervical spine was reconstructed using the Mimics 17.0 and Geomagic Studio 12.0 software. The drilling template was designed in the 3-Matic software. The trough position was simulated at the medial margin of the facet joint. Two holders were designed on both sides. On the open side, the holder would just allow the drill penetrate the ventral cortex of the lamina. On the hinge side, the holder was designed to keep the ventral cortex of the lamina intact. One orthopedic resident performed the surgery using the rapid prototyping drill template on four cadavers (template group). A control group of four cadavers were operated upon without the use of the template. The deviation of the final trough position from the simulated trough position was 0.18mm±0.51mm in the template group. All the troughs in the template group and 40% of the troughs in the control group were at the medial side of the facet joint. The complete hinge fracture rate was 5% in the template group, significantly lower than that (55%) in the control group (P=0.01). The rapid prototyping drill template could help the surgeon accomplish proper trough position and appropriate bone removal in EOLP on the cadaveric cervical spine. Copyright © 2016 Elsevier B.V. All rights reserved.
Dreesen, Erwin; Verstockt, Bram; Bian, Sumin; de Bruyn, Magali; Compernolle, Griet; Tops, Sophie; Noman, Maja; Van Assche, Gert; Ferrante, Marc; Gils, Ann; Vermeire, Séverine
2018-04-25
Trough concentrations of vedolizumab were found to correlate with clinical response in phase 3 studies of patients with ulcerative colitis (UC) or Crohn's disease (CD). Nevertheless, there are no solid data to support monitoring of vedolizumab trough concentrations in treated patients. We investigated the correlation between vedolizumab exposure and response in a real-world population and aimed to identify patient factors that affect exposure and response. We performed a retrospective cohort study of 179 consecutive patients (66 with UC and 113 with CD) who began vedolizumab therapy from September 1, 2015, through October 1, 2016, at University Hospitals Leuven, Belgium. Serum concentrations of vedolizumab were measured before all infusions up to week 30. Effectiveness endpoints included endoscopic healing (UC, Mayo endoscopic sub-score ≤1; CD, absence of ulcers), clinical response (physicians' global assessment), and biologic response or remission (based on level of C-reactive protein) and were assessed at week 14 (for patients with UC) and week 22 (for patients with CD). A stepwise forward addition-backward elimination modeling approach was performed to identify factors independently associated with vedolizumab exposure and response. Vedolizumab trough concentrations >30.0 μg/mL at week 2, >24.0 μg/mL at week 6, and >14.0 μg/mL during maintenance therapy associated with a higher probability of attaining the effectiveness endpoints for patients with UC or CD (P < .05). Higher body mass and more severe disease (based on high level of C-reactive protein and low level of albumin and/or hemoglobin) at the start of vedolizumab therapy associated with lower trough concentrations of vedolizumab over the 30-week period and a lower probability of achieving mucosal healing (P < .05). Mucosal healing was achieved in significantly more patients with UC than patients with CD, even though a diagnosis of UC was not an independent predictor of higher vedolizumab trough concentrations. In a retrospective study of 179 patients with CD or UC, we observed a correlation between vedolizumab exposure and response. These findings support monitoring of vedolizumab trough concentrations to predict patients' outcome. Copyright © 2018 AGA Institute. Published by Elsevier Inc. All rights reserved.
The Whitfield Solar CPV Collector
NASA Astrophysics Data System (ADS)
Bentley, Roger; Anstey, Ben; Callear, Jason; Chonavel, Sylvain; Clark, Ian; Collins, Ian; Ramallo, Alfonso; Scanlon, Hamilton; Weatherby, Clive
2010-10-01
Whitfield Solar is now in production with a point-focus Fresnel lens 70x PV concentrator that uses LGBC silicon cells. The design builds on initial research carried out under a number of EU-funded R&D projects. Each collector has twenty-four V-troughs 1.2 m long by 110 mm wide by 110 mm deep, and each trough carries 12 cells. Tracking is closed-loop, in a 2-axis tilt & roll system. Initial prototypes were installed in Spain in 2006, and subsequent production-version collectors have been on-sun since September 2008. In-field normalised d.c. system efficiency is 13.5%. Volume-manufactured sales price—including support frame and mark-up—is €2.40/Wp,dc, with scope for further significant cost reduction identified.
On-Field Demonstration Results of Medium Concentration System HSun®
NASA Astrophysics Data System (ADS)
Mendes-Lopes, J.; Pina, L.; Reis, F.; Coelho, S.; Wemans, J.; Sorasio, G.; Pereira, N.
2011-12-01
The paper presents the HSUN®, a new medium concentration photovoltaic (CPV) system, developed and produced by WS Energia S.A. The low cost manufacturing and standard components used by HSUN® technology increases the potential of the system to reach grid parity. The system was designed to have stable performance and low cost manufacturing, with a total active collector area of 1.68 m2 and 6.3 kg/m2 of weight. Based on a 20X integrated parabolic trough with coupled reflective secondary optics, the system uses high efficiency silicon cells, a passive cooling integrated system and is integrated in 1-axis horizontal tracking structure, the WS CPV HORIZON®. The open-chain configuration ensures that the wind drag is greatly reduced, increasing the reliability of the tracker, while the optimized optics design enables a high acceptance angle and uniform distribution of radiation throughout the PV receiver, using low-cost and low-weight components. Ray tracing simulations and experimental imaging acquisitions of the radiation profile were performed and compared, finite element models were used to perform thermal and structural analysis, and a specifically developed model was used to predict the electrical parameters of the receiver as a function of the concentration. All the components that integrate HSUN® technology are produced with machines used in mature industrial sectors thus guarantying mass production and benefiting from economies of scale. The on-field results are presented and discussed.
Cost of gentamicin assays carried out by microbiology laboratories.
Vacani, P F; Malek, M M; Davey, P G
1993-01-01
AIMS--To assess the current range of prices charged for gentamicin assays in United Kingdom laboratories; and to examine the laboratories' likely response to increases or decreases in the demand for the service. METHODS--A postal survey of the 420 members of the Association of Medical Microbiologists was used to establish the range of prices charged for aminoglycoside assays. Additionally, eight private institutions were contacted to determine what the private sector was charging for aminoglycoside assays. Reagent costs in the NHS laboratories were calculated by dividing the total cost of all aminoglycoside assay kits by the number of samples analysed. RESULTS--The NHS and the private institutions both showed a wide price variation. Prices charged to an in-hospital requester for a peak and trough assay ranged from 5.00 pounds to 68.20 pounds (n = 44), and to an external private hospital, under a bulk service contract, from 5.00 pounds to 96.00 pounds (n = 47). Prices charged by private laboratories ranged from 49.00 pounds to 84.00 pounds (n = 8). There was a log linear correlation in the NHS laboratories between the reagent costs per assay and the number of assays performed per year, and most laboratories thought that their price per assay would be sensitive to increases or decreases in demand. Laboratories which had purchased their assay machines had lower reagent costs per assay but higher repair and maintenance costs. Overall, number of assays performed and method of payment for assay machinery only accounted for 44.8% of the observed variation in assay kit costs. CONCLUSIONS--The price range for gentamicin assays in the United Kingdom is wide and is only partially explained by the number of assays performed. Most laboratories believe that they would experience a reduction in unit cost as output increases. The currently offered range of prices is, in part, due to variation in the laboratories' approach to costing the service provided and some laboratories charge prices which do not even cover the cost of assay kits. Overall, we believe that prices charged should be as close as possible to the marginal cost of the tests performed. PMID:8227402
PVMirrors: Hybrid PV/CSP collectors that enable lower LCOEs
NASA Astrophysics Data System (ADS)
Fisher, Kate; Yu, Zhengshan Jason; Striling, Rob; Holman, Zachary
2017-06-01
The primary challenge with concentrating solar power (CSP) is that the conversion efficiency is low—and the cost high—compared to that of photovoltaics (PV), and the primary challenge with PV is that the energy generated cannot be stored cost effectively. We introduce a technology that hybridizes CSP and PV, resulting in power plants with high energy conversion efficiency and affordable storage. This is accomplished by replacing silvered troughs (or heliostat facets) with "PVMirrors" that and direct photons of each wavelength to the converter (PV or thermal) that may best use them. A PVMirror looks like a curved PV module that includes a spectrum-splitting dichroic mirror film; this film, which is the heart of the technology, transmits near-infrared light to the underlying silicon PV cells while reflecting both longer and shorter wavelengths to a thermal absorber tube. This paper investigates the optical performance of dichroic mirror film, the specularity of PVMirrors, and the anticipated levelized cost of energy (LCOE) from a PVMirror power plant. PVMirrors are found to decrease LCOE by more than 15% relative to CSP while retaining full dispatchability.
Grosso, A M; Bodalia, P N; Macallister, R J; Hingorani, A D; Moon, J C; Scott, M A
2011-03-01
The UK National Health Service (NHS) currently spends in excess of £250 million per annum on angiotensin II receptor blockers (ARBs) for the treatment of hypertension and heart failure; with candesartan currently dominating the market. With the recent introduction of generic losartan, we set out to directly compare the branded market leader to its now cheaper alternative. The primary objectives were to compare the blood pressure (BP) lowering efficacy and cardiovascular outcomes of candesartan and losartan in the treatment of essential hypertension and chronic heart failure, respectively. The secondary objective was to model their comparative incremental cost-effectiveness in a UK NHS setting. The Cochrane Central Register of Controlled Trials (Cochrane Library 2009, issue 2), which contains the Hypertension and Heart Group's specialist register, Medline (1950-February 2010), and Embase (1980-February 2010) were included in the search strategy. Selection criteria were randomised studies of candesartan versus losartan in adults (> 18 years). The main outcome measures were as follows: Hypertension: mean change from baseline in trough (24 h postdose) systolic and diastolic BP. Heart failure: composite of cardiovascular death and hospital admission for management of heart failure. Two reviewers applied inclusion criteria, assessed trial quality, and extracted data. Eight (three of which met inclusion criteria) and zero trials compared candesartan directly with losartan in the treatment of hypertension and heart failure, respectively. A between-treatment difference of -1.96 mmHg [95% confidence interval (CI) -2.40 to -1.51] for trough diastolic BP and -3.00 mmHg (95% CI -3.79 to -2.22) for trough systolic BP in favour of candesartan was observed. Based on this differential, a 10-year Markov model estimates the cost per quality-adjusted life-year gained to exceed £40,000 for using candesartan in place of generic losartan. Candesartan reduces BP to a slightly greater extent when compared with losartan, however, such difference is unlikely to be cost-effective based on current acquisition costs, perceived NHS affordability thresholds and use of combination regimens. We could find no robust evidence supporting the superiority of candesartan over losartan in the treatment of heart failure. We therefore recommend using generic losartan as the ARB of choice which could save the UK NHS approximately £200 million per annum in drug costs. © 2011 Blackwell Publishing Ltd.
Laser welding on trough panel: 3D body part
NASA Astrophysics Data System (ADS)
Shirai, Masato; Hisano, Hirohiko
2003-03-01
Laser welding for automotive bodies has been introduced mainly by European car manufacturers since more than 10 years ago. Their purposes of laser welding introduction were mainly vehicle performance improvement and lightweight. And laser welding was applied to limited portion where shapes of panels are simple and easy to fit welded flanges. Toyota also has introduced laser welding onto 3 dimensional parts named trough panel since 1999. Our purpose of the introduction was common use of equipment. Trough panel has a complex shape and different shapes in each car type. In order to realize common use of welding equipment, we introduced parts locating equipment which had unique, small & simple jigs fo each car type and NC (Numerical Controlled) locators and air-cooled small laser head developed by ourselves to the trough welding process. Laser welding replaced spot welding and was applied linearly like stitches. Length of laser welding was determined according to comparison with statistic tensile strength and fatigue strength of spot welding.
Calza, L; Colangeli, V; Magistrelli, E; Bussini, L; Conti, M; Ramazzotti, E; Mancini, R; Viale, P
2017-08-01
The aim of the study was to assess plasma concentrations of darunavir/ritonavir and raltegravir in older patients compared with younger patients with HIV-1 infection. In this observational, open-label study, adult HIV-infected out-patients aged ≤ 40 years (younger patients) or ≥ 60 years (older patients) and treated with tenofovir/emtricitabine plus darunavir/ritonavir (800/100 mg daily) or raltegravir (400 mg twice daily) were asked to participate. The trough concentrations (C trough ) of darunavir/ritonavir and raltegravir were assessed at steady state using a validated high-performance liquid chromatography (HPLC)-tandem mass spectrometry method. A total of 88 HIV-positive patients were enrolled in the study. Forty-six patients were treated with darunavir/ritonavir, and 42 with raltegravir. The geometric mean plasma C trough (coefficient of variation) of raltegravir was comparable between the 19 older and 23 younger subjects: 106 ng/mL (151%) and 94 ng/mL (129%), respectively [geometric mean ratio (GMR) 0.85; 95% confidence interval (CI) 0.71-1.57; P = 0.087]. In contrast, the geometric mean plasma C trough of darunavir was significantly higher among the 21 older patients [2209 ng/mL (139%)] than among the 25 younger patients [1876 ng/mL (162%); GMR 1.56; 95% CI: 1.22-1.88; P = 0.004]. Similarly, the geometric mean C trough of ritonavir was significantly higher among older than among younger individuals. The mean plasma C trough of darunavir and ritonavir was significantly higher in older patients than in younger patients with HIV-1 infection, while the mean plasma level of raltegravir was comparable in the two groups. However, both regimens showed good tolerability in both younger and older subjects. © 2017 British HIV Association.
McNeil, J Chase; Kok, Eric Y; Forbes, Andrea; Lamberth, Linda; Hulten, Kristina G; Vallejo, Jesus G; Mason, Edward O; Kaplan, Sheldon L
2015-01-01
Introduction Elevated vancomycin MICs in S. aureus have been associated with worse clinical outcomes in adults. For invasive MRSA infections in adults, the IDSA recommends targeting vancomycin serum trough concentrations between 15–20 μg/ml. We evaluated trends in vancomycin MICs from healthcare-associated S. aureus bacteremia isolates in children in addition to correlating vancomycin serum trough levels with clinical outcomes. Methods Patients and isolates were identified from a prospective S. aureus surveillance study at Texas Children's Hospital (TCH). Healthcare-associated S. aureus bacteremia isolates from 2003–2013 were selected. Vancomycin MICs by E-test were determined and medical records were reviewed. Acute kidney injury (AKI) was defined as doubling of the baseline serum creatinine. Results 341 isolates met inclusion criteria. We observed a reverse vancomycin creep among MRSA isolates in the study period with a decline in the proportion of isolates with vancomycin MIC ≥ 2 μg/ml (from 32.7% to 5.6%, p<0.001). However, the proportion of MSSA isolates with MIC ≥ 2 μg/ml increased (from 2.9% to 9%, p=0.04). Among patients who had vancomycin troughs performed, there was no difference in duration of bacteremia or fever with vancomycin trough >15 μg/ml vs. < 15 μg/ml. A vancomycin trough > 15 μg/ml was, however, an independent risk factor for AKI. Conclusions Vancomycin MICs are shifting among healthcare-associated S. aureus bacteremia isolates with significant differences between MRSA and MSSA at TCH. Higher vancomycin troughs did not improve outcomes in pediatric healthcare-associated S. aureus bacteremia but were associated with increased nephrotoxicity. Further studies are needed to better understand optimal management of children with S. aureus bacteremia. PMID:26646549
NASA Technical Reports Server (NTRS)
Selcuk, M. K.
1977-01-01
A test bed for experimental evaluation of a fixed solar collector which combines an evacuated glass tube solar receiver with a flat plate/black chrome plated copper absorber and an asymmetric vee-trough concentrator was designed and constructed. Earlier predictions of thermal performance were compared with test data acquired for a bare vacuum tube receiver; and receiver tubes with Alzak aluminum, aluminized FEP Teflon film laminated sheet metal and second surface ordinary mirror reflectors. Test results and system economics as well as objectives of an ongoing program to obtain long-term performance data are discussed.
A multicenter experience with generic tacrolimus conversion.
McDevitt-Potter, Lisa M; Sadaka, Basma; Tichy, Eric M; Rogers, Christin C; Gabardi, Steven
2011-09-27
The first generic tacrolimus product gained Food and Drug Administration approval in August 2009. This prospective, observational trial sought to determine the need for dose titrations and measure drug cost savings on conversion to generic tacrolimus. Transplant recipients on stable tacrolimus doses were converted from brand to generic tacrolimus on a mg:mg basis. Data were collected at the time of generic conversion (study arm) and at a time point exactly 6 months before conversion (control arm) for all subjects. Seventy conversions from four centers are reported. Subjects were a mean of 70 months after kidney (n=37), liver (n=28), or multiorgan (n=5) transplant. In the study arm, mean tacrolimus doses were 4.4 and 4.5 mg/d and mean tacrolimus trough concentrations were 5.8 and 5.9 ng/mL before and after conversion, respectively. In the control arm, mean tacrolimus doses were 4.6 and 4.6 mg/d and mean tacrolimus trough concentrations were 6.1 and 5.9 ng/mL before and after the control time point, respectively. Dose titrations occurred in five patients (7%) in the control arm and 15 patients (21%) in the study arm (P=0.028). Mean monthly drug costs were $645 for brand, $593 for generic, and $595 for generic after dose titrations. Mean monthly patient copays were $38 for brand and $15 for generic. These cumulative data show that dose requirements and trough levels are similar between brand and generic tacrolimus and that generic substitution allows for savings. However, postconversion monitoring is prudent as patients may require dose titration.
Harmonization of standards for parabolic trough collector testing in solar thermal power plants
NASA Astrophysics Data System (ADS)
Sallaberry, Fabienne; Valenzuela, Loreto; Palacin, Luis G.; Leon, Javier; Fischer, Stephan; Bohren, Andreas
2017-06-01
The technology of parabolic trough collectors (PTC) is used widely in concentrating Solar Power (CSP) plants worldwide. However this type of large-size collectors cannot be officially tested by an accredited laboratory and certified by an accredited certification body so far, as there is no standard adapted to its particularity, and the current published standard for solar thermal collectors are not completely applicable to them. Recently some standardization committees have been working on this technology. This paper aims to give a summary of the standardized testing methodology of large-size PTC for CSP plants, giving the physical model chosen for modeling the thermal performance of the collector in the new revision of standard ISO 9806 and the points still to be improved in the standard draft IEC 62862-3-2. In this paper, a summary of the testing validation performed on one parabolic trough collector installed in one of the test facilities at the Plataforma Solar de Almería (PSA) with this new model is also presented.
Rinse trough with improved flow
O'Hern, Timothy J.; Grasser, Thomas W.
1998-01-01
Novel rinse troughs accomplish thorough uniform rinsing. The troughs are suitable for one or more essentially planar objects having substantially the same shape. The troughs ensure that each surface is rinsed uniformly. The new troughs provide uniform rinse fluid flow over the objects' surfaces to accomplish a more thorough rinse than prior art troughs.
Rinse trough with improved flow
O`Hern, T.J.; Grasser, T.W.
1998-08-11
Novel rinse troughs accomplish thorough uniform rinsing. The troughs are suitable for one or more essentially planar objects having substantially the same shape. The troughs ensure that each surface is rinsed uniformly. The new troughs provide uniform rinse fluid flow over the objects` surfaces to accomplish a more thorough rinse than prior art troughs. 5 figs.
Corrugated pipe adhesive applicator apparatus
Shirey, R.A.
1983-06-14
Apparatus for coating selected portions of the troughs of a corrugated pipe with an adhesive includes a support disposed within the pipe with a reservoir containing the adhesive disposed on the support. A pump, including a spout, is utilized for supplying the adhesive from the reservoir to a trough of the pipe. A rotatable applicator is supported on the support and contacts the trough of the pipe. The applicator itself is sized so as to fit within the trough, and contacts the adhesive in the trough and spreads the adhesive in the trough upon rotation. A trough shield, supported by the support and disposed in the path of rotation of the applicator, is utilized to prevent the applicator from contacting selected portions of the trough. A locator head is also disposed on the support and provides a way for aligning the spout, the applicator, and the trough shield with the trough. 4 figs.
Parabolic trough receiver heat loss and optical efficiency round robin 2015/2016
NASA Astrophysics Data System (ADS)
Pernpeintner, Johannes; Schiricke, Björn; Sallaberry, Fabienne; de Jalón, Alberto García; López-Martín, Rafael; Valenzuela, Loreto; de Luca, Antonio; Georg, Andreas
2017-06-01
A round robin for parabolic trough receiver heat loss and optical efficiency in the laboratory was performed between five institutions using five receivers in 2015/2016. Heat loss testing was performed at three cartridge heater test benches and one Joule heating test bench in the temperature range between 100 °C and 550 °C. Optical efficiency testing was performed with two spectrometric test bench and one calorimetric test bench. Heat loss testing results showed standard deviations at the order of 6% to 12 % for most temperatures and receivers and a standard deviation of 17 % for one receiver at 100 °C. Optical efficiency is presented normalized for laboratories showing standard deviations of 0.3 % to 1.3 % depending on the receiver.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1980-01-01
The mathematical modeling of 11 different concentrating collectors is documented and instructions are given for use of the computer code. The 11 concentrators modeled are: faceted mirror concentration; fixed mirror, two-axis tracking receiver; parabolic trough collector; linear Fresnel; incremental reflector; inflated cylindrical concentrator; CPC-involute reflector with evacuated receiver; CPC-parabolic/involute reflector; V trough collectors, imaging collapsing concentrator; and parabolic dish collector. (MHR)
Adaptive salinity management in the Murray-Darling Basin: a transaction cost study
NASA Astrophysics Data System (ADS)
Loch, A. J.
2017-12-01
Transaction costs hinder or promote effective management of common good resource intertemporal externalities. Appropriate policy choices may reduce externalities and improve social welfare, and transaction cost analysis can help to evaluate policy choices. However, without measurement of relevant transaction costs such policy evaluation remains challenging. This article uses a time series dataset of salinity management program to test theory aimed at transaction cost-based policy evaluation and adaptive resource management over a period of 30 years worth of data. We identify peaks and troughs in transaction costs over time, lag-effects in program expenditure, and calculate the decay in transaction cost impacts. We conclude that Australian salinity management programs are achieving flexible institutional outcomes and effective policy arrangements with long-term benefits. Proposed changes to the program moving forward add weight to our assertions of adaptive strategies, and illustrate the value of the novel data-driven tracnsaction cost analysis approach for other jurisdictions.
McNeil, J Chase; Kok, Eric Y; Forbes, Andrea R; Lamberth, Linda; Hulten, Kristina G; Vallejo, Jesus G; Mason, Edward O; Kaplan, Sheldon L
2016-03-01
Elevated vancomycin minimum inhibitory concentrations (MICs) in Staphylococcus aureus have been associated with worse clinical outcomes in adults. For invasive meticillin-resistant S. aureus (MRSA) infections in adults, the Infectious Diseases Society of America recommends targeting vancomycin serum trough concentrations between 15 and 20 μg/mL. We evaluated trends in vancomycin MICs from healthcare-associated (HCA) S. aureus bacteremia isolates in children in addition to correlating vancomycin serum trough levels with clinical outcomes. Patients and isolates were identified from a prospective S. aureus surveillance study at Texas Children's Hospital (TCH). HCA S. aureus bacteremia isolates from 2003 to 2013 were selected. Vancomycin MICs by E-test were determined and medical records were reviewed. Acute kidney injury (AKI) was defined as doubling of the baseline serum creatinine. Three hundred forty-one isolates met inclusion criteria. We observed a reverse vancomycin creep among MRSA isolates in the study period with a decline in the proportion of isolates with vancomycin MIC ≥ 2 μg/mL (from 32.7% to 5.6%; P < 0.001). However, the proportion of MSSA isolates with MIC ≥ 2 μg/mL increased (from 2.9% to 9%; P = 0.04). Among patients who had vancomycin troughs performed, there was no difference in duration of bacteremia or fever with vancomycin trough >15 versus <15 μg/mL. A vancomycin trough >15 μg/mL was, however, an independent risk factor for AKI. Vancomycin MICs are shifting among HCA S. aureus bacteremia isolates with significant differences between MRSA and MSSA at TCH. Higher vancomycin troughs did not improve outcomes in pediatric HCA S. aureus bacteremia but were associated with increased nephrotoxicity. Further studies are needed to better understand optimal management of children with S. aureus bacteremia.
NASA Astrophysics Data System (ADS)
Nishizawa, A.; Kaneda, K.; Oikawa, M.; Horiuchi, D.; Fujioka, Y.; Okada, C.
2017-12-01
Several depressions found under the thick sediments in the East China Sea shelf have been considered as failed rift basins. Their formation age becomes progressively younger from NW to SE and the youngest rift basin is the Okinawa Trough, an active backarc basin of the Ryukyu (Nansei-Shoto) arc-trench system, to the southwest of Kyusyu, Japan. Its rifting is in progress and related hydrothermal activity is present in the trough. The knowledge of the crustal structure of the trough is fundamental to understand the current active tectonics and predict the future of the trough. We, Japan Coast Guard, have conducted extensive seismic reflection and refraction surveys in the Ryukyu region since 2008 and compiled the seismic structures of the Okinawa Trough. We will show the crustal structures along seven along-trough and ten across-trough seismic survey lines. The P-wave velocity models beneath the Okinawa Trough generally show a thinned continental/island arc crust consisting of upper, middle, and lower crusts. Moho depths below the trough were estimated mainly from Moho reflection (PmP) travel times. The crustal thickness of the trough is thinner than those of the East China Sea shelf and of the Ryukyu Islands. The depth of the Moho below the trough decreases from over 30 km in the north to about 13 km in the south, indicating a difference in degree of the rifting process. The position of the shallowest Moho along the across-trough lines in the northern trough does not necessarily correspond to the center of the trough defined as the deepest water depth, but it corresponds to the transition area between the East China Sea shelf and the Okinawa Trough. An M7.1 earthquake occurred at the transition area on Nov. 14, 2015 (JST) and many aftershocks were observed along the transition. This seismic activity demonstrated that the area is under rifting tectonics in the present.
Directed flow fluid rinse trough
Kempka, Steven N.; Walters, Robert N.
1996-01-01
Novel rinse troughs accomplish thorough uniform rinsing. The tanks are suitable for one or more essentially planar items having substantially the same shape. The troughs ensure that each surface is rinsed uniformly. The new troughs also require less rinse fluid to accomplish a thorough rinse than prior art troughs.
NASA Astrophysics Data System (ADS)
Orosz, Matthew; Zweibaum, Nicolas; Lance, Tamir; Ruiz, Maritza; Morad, Ratson
2016-05-01
Sunlight to electricity efficiencies of Parabolic Trough Collector (PTC) plants are typically on the order of 15%, while commercial solar Photovoltaic (PV) technologies routinely achieve efficiencies of greater than 20%, albeit with much higher conversion efficiencies of photons at the band gap. Hybridizing concentrating solar power and photovoltaic technologies can lead to higher aggregate efficiencies due to the matching of photons to the appropriate converter based on wavelength. This can be accomplished through spectral filtering whereby photons unusable or poorly utilitized by PV (IR and UV) are passed through to a heat collection element, while useful photons (VIS) are reflected onto a concentrating PV (CPV) receiver. The mechanical design and experimental validation of spectral splitting optics is described in conjunction with system level modeling and economic analysis. The implications of this architecture include higher efficiency, lower cost hybrid CSP-PV power systems, as well as the potential to retrofit existing PTC plants to boost their output by ~ 10% at a projected investment cost of less than 1 per additional net Watt and an IRR of 18%, while preserving the dispatchability of the CSP plant's thermal energy storage.
Directed flow fluid rinse trough
Kempka, S.N.; Walters, R.N.
1996-07-02
Novel rinse troughs accomplish thorough uniform rinsing. The tanks are suitable for one or more essentially planar items having substantially the same shape. The troughs ensure that each surface is rinsed uniformly. The new troughs also require less rinse fluid to accomplish a thorough rinse than prior art troughs. 9 figs.
De Cock, R. F. W.; Allegaert, K.; Vanhaesebrouck, S.; Danhof, M.; Knibbe, C. A. J.
2015-01-01
Based on a previously derived population pharmacokinetic model, a novel neonatal amikacin dosing regimen was developed. The aim of the current study was to prospectively evaluate this dosing regimen. First, early (before and after second dose) therapeutic drug monitoring (TDM) observations were evaluated for achieving target trough (<3 mg/liter) and peak (>24 mg/liter) levels. Second, all observed TDM concentrations were compared with model-predicted concentrations, whereby the results of a normalized prediction distribution error (NPDE) were considered. Subsequently, Monte Carlo simulations were performed. Finally, remaining causes limiting amikacin predictability (i.e., prescription errors and disease characteristics of outliers) were explored. In 579 neonates (median birth body weight, 2,285 [range, 420 to 4,850] g; postnatal age 2 days [range, 1 to 30 days]; gestational age, 34 weeks [range, 24 to 41 weeks]), 90.5% of the observed early peak levels reached 24 mg/liter, and 60.2% of the trough levels were <3 mg/liter (93.4% ≤5 mg/liter). Observations were accurately predicted by the model without bias, which was confirmed by the NPDE. Monte Carlo simulations showed that peak concentrations of >24 mg/liter were reached at steady state in almost all patients. Trough values of <3 mg/liter at steady state were documented in 78% to 100% and 45% to 96% of simulated cases with and without ibuprofen coadministration, respectively; suboptimal trough levels were found in patients with postnatal age <14 days and current weight of >2,000 g. Prospective evaluation of a model-based neonatal amikacin dosing regimen resulted in optimized peak and trough concentrations in almost all patients. Slightly adapted dosing for patient subgroups with suboptimal trough levels was proposed. This model-based approach improves neonatal dosing individualization. PMID:26248375
Scheel, Jennifer; Reber, Sandra; Stoessel, Lisa; Waldmann, Elisabeth; Jank, Sabine; Eckardt, Kai-Uwe; Grundmann, Franziska; Vitinius, Frank; de Zwaan, Martina; Bertram, Anna; Erim, Yesim
2017-03-29
Different measures of non-adherence to immunosuppressant (IS) medication have been found to be associated with rejection episodes after successful transplantation. The aim of the current study was to investigate whether graft rejection after renal transplantation is associated with patient-reported IS medication non-adherence and IS trough level variables (IS trough level variability and percentage of sub-therapeutic IS trough levels). Patient-reported non-adherence, IS trough level variability, percentage of sub-therapeutic IS trough levels, and acute biopsy-proven late allograft rejections were assessed in 267 adult renal transplant recipients who were ≥12 months post-transplantation. The rate of rejection was 13.5%. IS trough level variability, percentage of sub-therapeutic IS trough levels as well as patient-reported non-adherence were all significantly and positively associated with rejection, but not with each other. Logistic regression analyses revealed that only the percentage of sub-therapeutic IS trough levels and age at transplantation remained significantly associated with rejection. Particularly, the percentage of sub-therapeutic IS trough levels is associated with acute rejections after kidney transplantation whereas IS trough level variability and patient-reported non-adherence seem to be of subordinate importance. Patient-reported non-adherence and IS trough level variables were not correlated; thus, non-adherence should always be measured in a multi-methodological approach. Further research concerning the best combination of non-adherence measures is needed.
Nair, Ranjith G; Bharadwaj, P J; Samdarshi, S K
2016-12-01
This work reports the details of the design components and materials used in a linear compound parabolic trough reactor constructed with an aim to use the photocatalyst for solar photocatalytic applications. A compound parabolic trough reactor has been designed and engineered to exploit both UV and visible part of the solar irradiation. The developed compound parabolic trough reactor could receive almost 88% of UV radiation along with a major part of visible radiation. The performance of the reactor has been evaluated in terms of degradation of a probe pollutant using the parameters such as rate constant, residence time and photonic efficiency. An attempt has been made to assess the performance in different ranges of solar spectrum. Finally the developed reactor has been employed for the photocatalytic treatment of a paper mill effluent using Degussa P25 as the photocatalyst. The paper mill effluent collected from Nagaon paper mill, Assam, India has been treated under both batch mode and continuous mode using Degussa P25 photocatalyst under artificial and natural solar radiation, respectively. The photocatalytic degradation kinetics of the paper mill effluent has been determined using the reduction in total organic carbon (TOC) values of the effluent. Copyright © 2015 Elsevier Inc. All rights reserved.
SHARAD Radar investigations into the initiation of spiral troughs on Planum Boreum, Mars
NASA Astrophysics Data System (ADS)
Smith, I. B.; Holt, J. W.
2010-12-01
Recent evidence demonstrates that the prominent spiral troughs of the North Polar Layered Deposits (NPLD) on Mars are not young features, having persisted and evolved during accumulation of more than 500 meters of ice [Smith and Holt, Nature, 2010]. Because of the rich stratigraphy in the NPLD, determining the processes controlling trough formation and evolution is an important step in understanding the history of ice and climate on Mars. Multiple periods of trough initiation are observed in radar data collected by the Shallow Radar (SHARAD) instrument on Mars Reconnaissance Orbiter; however, the mechanism behind trough initiation is still a mystery. Discrete radar reflectors can be associated with the onset of spiral troughs because of their stratigraphic relationships: below the reflectors the troughs do not exist, and above the troughs begin to take shape. To address the question of trough formation we have mapped these reflectors, which are assumed to represent isochrones, in more than 400 SHARAD observations throughout the NPLD. Taken together these represent the surfaces where troughs initiated, i.e. surfaces that lie directly below the first appearance of troughs. When observation geometries are favorable, we find that the onset of each trough rests on a change in slope usually at the base of a buried erosional scarp. The underlying layers end abruptly at the scarps rather than diminish or pinch out with distance, suggesting that the NPLD underwent cap-wide erosion predating trough formation. This surface morphology provides the initial conditions needed to form troughs from the combination of deposition and katabatic winds affected by surface slope. Radar observations indicate that the troughs initiated and evolved with approximately the same wavelength as can be measured today. Thus proposed hypotheses of small bedforms growing into larger wavelength structures is not supported. Locally, the unconformable contact between younger, trough-related material and older eroded surfaces is exposed at the surface. Neither the younger nor older exposed layers show small-scale bedforms, supporting this conclusion. At least two initiation surfaces can be observed in the radar data within the uppermost 500 m of the NPLD. Alternating periods of erosion and deposition are predicted to result from large changes in obliquity and insolation at the Martian north pole [Laskar et al., Nature, 2004], suggesting that trough initiation may be related to orbital forcing.
2006-06-11
This MOC image shows a wide, flat-floored trough flanked by several smaller, branching troughs in the Olympica Fossae region of Mars. Dark- and intermediate-toned slope streaks -- created by dry avalanches of dust -- occur on the trough walls
Lightweight, low-cost solar energy collector
NASA Technical Reports Server (NTRS)
Hochberg, Eric B. (Inventor); Costen, Michael K. (Inventor)
2006-01-01
A lightweight solar concentrator of the reflecting parabolic or trough type is realized via a thin reflecting film, an inflatable structural housing and tensioned fibers. The reflector element itself is a thin, flexible, specularly-reflecting sheet or film. The film is maintained in the parabolic trough shape by means of a plurality of identical tensioned fibers arranged to be parallel to the longitudinal axis of the parabola. Fiber ends are terminated in two identical spaced anchorplates, each containing a plurality of holes which lie on the desired parabolic contour. In a preferred embodiment, these fibers are arrayed in pairs with one fiber contacting the front side of the reflecting film and the other contacting the back side of the reflecting film. The reflective surface is thereby slidably captured between arrays of fibers which control the shape and position of the reflective film. Gas pressure in the inflatable housing generates fiber tension to achieve a truer parabolic shape.
NASA Astrophysics Data System (ADS)
Ajayi, C. O.; Ajakaiye, D. E.
1981-12-01
The origin of the Benue trough has been a controversial subject. Previous workers in the area have evolved several theories ranging from a rift, with or without plate tectonic concepts (King, 1950; Wright, 1968, 1970; Burke et al., 1970; Grant, 1971; Olade, 1975) to a geosyncline (Lees, 1952) and a combination of both (Cratchley and Jones, 1965; Offodile, 1976) to explain the origin of the trough. One of the aims of the gravity survey, carried out in the middle Benue and discussed in this paper, was to attempt to resolve some of the problems associated with the origin of the trough as proposed by previous workers and in so doing to explain the geological peculiarities associated with the trough. Interpretations of the gravity data along two north—south profiles in the survey area indicated the existence of a rift, of normal width (about 40 km) buried under the Cretaceous cover and located between the central axis (ridge) of the trough and the northern boundary of the trough. The gravity minimum which occurs south of the central axis of the trough, was also ascribed to another rift. Thus the Benue trough is considered to consist of two parallel rifts separated by the axial ridge which partly explains the abnormal width of the trough. The interpreted models also indicate a low-angle thrust fault, with a small displacement, which may be related to the folding of the sediments in the trough and also to the asymmetry of the trough. Furthermore, the gravity data suggest that oceanic crust might not have reached the ground surface in the Benue trough, as in the Red Sea, before rifting ceased.
Improved Large Aperture Collector Manufacturing
DOE Office of Scientific and Technical Information (OSTI.GOV)
O'Rourke, Deven; Farr, Adrian
2015-12-01
The parabolic trough is the most established CSP technology and carries a long history of design experimentation dating back to the 1970’s. This has led to relatively standardized collector architectures, a maturing global supply chain, and a fairly uniform cost reduction strategy. Abengoa has deployed more than 1,500MWe of CSP troughs across several countries and has built and tested full-scale prototypes of many R&D concepts. The latest trough R&D efforts involved efforts to internalize non-CSP industry experience including a preliminary DFMA principles review done with Boothroyd Dewhurst, a construction literature review by the Arizona State University School of Construction Management,more » and two more focused manufacturing engineering subcontracts done by Ricardo Inc. and the nonprofit Edison Welding Institute. The first two studies highlighted strong opportunities in lowering part count, standardizing components and fasteners, developing modular designs to support prefabrication and automation, and devising simple, error-proof manual assembly methods. These principles have delivered major new cost savings in otherwise “mature” products in analogous industries like automotive, truck trailer manufacture, metal building fabrication, and shipbuilding. For this reason, they were core in the design development of the SpaceTube® collector, and arguably key to its early successes. The latter two studies were applied specifically to the first-generation SpaceTube® design and were important in setting the direction of the present SolarMat project. These studies developed a methodology to analyze the costs of manufacture and assembly, and identify new tooling concepts for more efficient manufacture. Among the main opportunities identified in these studies were the automated mirror arm manufacturing concept and the need for a less infrastructure-intensive assembly line, both of which now form central pillars of the SolarMat project strategy. These new designs will be supported by new technology in the area of quality control inspection, in which state of the art photogrammetry and laser CMM inspection methods will be used to qualify parts and assemblies, and in which the recently-developed Absorber Reflection Method will enable in-line quality control inspection of modules produced by the new high-rate production line.« less
Development of sheet-metal parabolic-trough reflector panels
NASA Astrophysics Data System (ADS)
Biester, A. W.
1982-06-01
Efforts to develop accurate, durable, and mass producible sheet metal parabolic trough solar collectors and the associated support for the collectors are described. The design considered is similar to an automobile hood, a two-piece sheet metal structure consisting of a formed steel frame or stiffening panel and a smooth contoured skin. The two pieces may be bonded or welded to form a rigid structure, and a reflective surface applied such as a film, glass mirror, or any of the presently utilized materials. The work encompassed material selection, adhesive selection and testing, tool design and fabrication, prototype panel production, and design and development of torque tube assemblies on which the trough is inclined. Results of adhesive bonding studies are given. It is found that high volume technology can be used to produce accurate and structurally sound reflector panels, and one configuration was selected for fabrication in suitable quantities for performance testing.
A new TRNSYS component for parabolic trough collector simulation
NASA Astrophysics Data System (ADS)
Drosou, Vassiliki; Valenzuela, Loreto; Dimoudi, Argiro
2018-03-01
This study describes and evaluates a new simulation component for parabolic trough collectors (PTCs). The new simulation component is implemented in the TRNSYS software environment by means of new Type that is suitable for integration into the calculation of a whole concentrating solar thermal plant, in order to evaluate the energy production of a PTC. The main advantage of the new Type is that is derived from experimental data available on efficiency Test Reports, according to the current European and International standards, rather than the theoretical approach considered in the existing parabolic trough component of TRNSYS library. The performance of the new Type has been validated with real experimental data obtained from the DISS solar test loop in Plataforma Solar de Almería, Spain. The paper describes the modelling approach, presents the comparison of simulation results with measurements taken at the DISS facility and evaluates the results.
Zeng, Jianfei; Shen, Xiuli; Sun, Xiaoxi; Liu, Ning; Han, Lujia; Huang, Guangqun
2018-05-01
With the advantages of high treatment capacity and low operational cost, large-scale trough composting has become one of the mainstream composting patterns in composting plants in China. This study measured concentrations of O 2 , CO 2 , CH 4 and NH 3 on-site to investigate the spatial and temporal distribution of pore gas concentrations during mainstream large-scale trough composting in China. The results showed that the temperature in the center of the pile was obviously higher than that in the side of the pile. Pore O 2 concentration rapidly decreased and maintained <5% (in volume) for 38 days or more in both the center and side of the pile and effective O 2 diffusion occurred at most in every two contiguous layers. Pore CO 2 and CH 4 concentrations at each measurement point were positively correlated (0.436 ≤ r ≤ 0.570, P < 0.01) and the concentrations in the side of the pile were obviously lower than those in the center. The top layer exhibited highest pore O 2 concentration and lowest CO 2 and CH 4 concentrations, and the bottom layer was on the contrary. No significant differences in pore NH 3 concentrations between different layers or between different measurement points in the same layer were found. Therefore, mixing the center and the side of the pile when mechanical turning and adjusting the height of the pile according to the physical properties of bulking agents are suggested to optimize the oxygen distribution and promote the composting process during large-scale trough composting when the pile was naturally aerated, which will contribute to improving the current undesirable atmosphere environment in China. Copyright © 2018 Elsevier Ltd. All rights reserved.
Suitability of feeding and chewing time for estimation of feed intake in dairy cows.
Pahl, C; Hartung, E; Grothmann, A; Mahlkow-Nerge, K; Haeussermann, A
2016-09-01
Monitoring of feeding and rumination behaviour can provide useful information for dairy herd management. The feeding behaviour of dairy cows can be recorded by different techniques, such as video cameras, weighing troughs or chewing sensors. Among feeding characteristics, individual feed intake of cows is of utmost interest, but as weighing troughs have high space and cost requirements they are used primarily in research studies. The objective of the present study was to evaluate whether records on feeding time or chewing activity or a combination of both contain enough information to estimate feed intake with sufficient accuracy. Feed intake and feeding time per cow were recorded by means of weighing troughs. Concurrently, chewing activity of seven cows was recorded by MSR-ART pressure sensors during five to eight measuring days per cow. Feeding and chewing behaviour were evaluated in time slots (1 min) and additionally assigned to feeding bouts for further analysis. The 1 min time slots were classified into feeding/no feeding or chewing/no chewing by the two systems, and agreement was found in 92.2% of the records. On average, cows spent 270±39 min/day at the feeding troughs and chewed 262±48 min/day. The average fresh matter intake (FMI) was 49.6±5.1 kg/day. Feed intake was divided into 9.7 bouts/day during which cows fed in average 27.8±21.7 min/bout and chewed 27.0±23.1 min/bout. The correlation between FMI and feeding time was r=0.891 and between FMI and chewing time r=0.780 overall cows. Hence, both systems delivered suitable information for estimating feed intake.
Freeform solar concentrator with a highly asymmetric acceptance cone
NASA Astrophysics Data System (ADS)
Wheelwright, Brian; Angel, J. Roger P.; Coughenour, Blake; Hammer, Kimberly
2014-10-01
A solar concentrator with a highly asymmetric acceptance cone is investigated. Concentrating photovoltaic systems require dual-axis sun tracking to maintain nominal concentration throughout the day. In addition to collecting direct rays from the solar disk, which subtends ~0.53 degrees, concentrating optics must allow for in-field tracking errors due to mechanical misalignment of the module, wind loading, and control loop biases. The angular range over which the concentrator maintains <90% of on-axis throughput is defined as the optical acceptance angle. Concentrators with substantial rotational symmetry likewise exhibit rotationally symmetric acceptance angles. In the field, this is sometimes a poor match with azimuth-elevation trackers, which have inherently asymmetric tracking performance. Pedestal-mounted trackers with low torsional stiffness about the vertical axis have better elevation tracking than azimuthal tracking. Conversely, trackers which rotate on large-footprint circular tracks are often limited by elevation tracking performance. We show that a line-focus concentrator, composed of a parabolic trough primary reflector and freeform refractive secondary, can be tailored to have a highly asymmetric acceptance angle. The design is suitable for a tracker with excellent tracking accuracy in the elevation direction, and poor accuracy in the azimuthal direction. In the 1000X design given, when trough optical errors (2mrad rms slope deviation) are accounted for, the azimuthal acceptance angle is +/- 1.65°, while the elevation acceptance angle is only +/-0.29°. This acceptance angle does not include the angular width of the sun, which consumes nearly all of the elevation tolerance at this concentration level. By decreasing the average concentration, the elevation acceptance angle can be increased. This is well-suited for a pedestal alt-azimuth tracker with a low cost slew bearing (without anti-backlash features).
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jorgenson, Jennie; Denholm, Paul; Mehos, Mark
2013-12-01
Concentrating solar power with thermal energy storage (CSP-TES) is a unique source of renewable energy in that the solar thermal energy can be dispatched similarly to conventional thermal generation. However, CSP-TES plants are energy-limited, meaning that their response might be restricted by solar availability. Therefore, the use of this limited solar energy must be optimally scheduled toprovide the greatest value to the system. The timing of CSP-TES dispatch depends on a variety of factors, including electricity demand patterns, the penetration of variable generation sources, and the configuration of the CSP-TES plant itself. We use an established CSP-TES modeling framework inmore » a commercially available production cost model to compare the dispatch and value of two CSP-TEStechnologies (molten salt towers and parabolic troughs) in a Colorado test system. In addition, we consider a range of configuration parameters, such as the solar multiple and thermal energy storage limit, to evaluate how the operational and capacity value varies with plant configuration.« less
Hale, Cory M; Seabury, Robert W; Steele, Jeffrey M; Darko, William; Miller, Christopher D
2017-06-01
To determine whether there is an association between higher vancomycin trough concentrations and attainment of a calculated area under the concentration-time curve (AUC)/minimum inhibitory concentration (MIC) ≥400. A retrospective analysis was conducted among vancomycin-treated adult patients with a positive methicillin-resistant Staphylococcus aureus (MRSA) culture. Attainment of a calculated AUC/MIC ≥400 was compared between patients with troughs in the reference range of 15 to 20 mg/L and those with troughs in the following ranges: <10, 10 to 14.9, and >20 mg/L. Nephrotoxicity was assessed as a secondary outcome based on corrected average vancomycin troughs over 10 days of treatment. Overall, 226 patients were reviewed and 100 included. Relative to troughs ≥10, patients with vancomycin troughs <10 mg/L were 73% less likely to attain an AUC/MIC ≥400 (odds ratio [OR] 0.27, 95% confidence interval [CI]: 0.01-0.75). No difference was found in the attainment of an AUC/MIC ≥400 in patients with troughs of 10 to 14.9 mg/L and >20 mg/L when compared to patients with troughs of 15 to 20 mg/L. The mean corrected average vancomycin trough was higher in patients developing nephrotoxicity compared to those who did not (19.5 vs 14.5 mg/L, P < .001). Achieving vancomycin serum trough concentrations of 15 to 20 mg/L did not result in an increased attainment of the AUC/MIC target relative to troughs of 10 to 14.9 mg/L but may increase nephrotoxicity risk.
NASA Astrophysics Data System (ADS)
Wang, Hong; Duan, Huanlin; Chen, Aidong
2018-02-01
In this paper, the mine-water source heat pump system is proposed in residential buildings of a mining community. The coefficient of performance (COP) and the efficiency of exergy are analyzed. The results show that the COP and exergy efficiency of the mine-water source heat pump are improved, the exergy efficiency of mine-water source heat pump is more than 10% higher than that of the air source heat pump.The electric power conservation measure of “peak load shifting” is also emphasized in this article. It shows that itis a very considerable cost in the electric saving by adopting the trough period electricity to produce hot water. Due to the proper temperature of mine water, the mine-watersource heat pump unit is more efficient and stable in performance, which further shows the advantage of mine-water source heat pump in energy saving and environmental protection. It provides reference to the design of similar heat pump system as well.
Maximova, Natalia; Gregori, Massimo; Simeone, Roberto; Sonzogni, Aurelio; Boz, Giulia; Fucile, Carmen; Marini, Valeria; Martelli, Antonietta; Mattioli, Francesca
2017-09-08
42 pediatric patients with iron overload, who underwent liver biopsy and DFX treatment after hematopoietic stem cell transplantation were included in the study group. The patients were divided into two groups diversified according to deferasirox trough plasma concentrations (DFX C trough ) with cut-off equal to10 mcg/mL. The average dose of DFX was 25.9 mg/kg in the DFX C trough < 10 mcg/mL group versus 19.2 mg/kg in the DFX C trough > 10 mcg/mL group ( p =0,0003). The mean duration of DFX treatment was 135.7 days in the DFX C trough < 10 mcg/mL group versus 41.8 days in the DFX C trough > 10 mcg/mL group ( p <0.0001). The mean tissue iron concentration in the DFX C trough < 10 mcg/mL group was 261.9 μmol/g versus 133.4 μmol/g in the DFX C trough > 10 mcg/mL group ( p < 0.0001). 21 patients (100%) in the DFX C trough > 10 mcg/mL group had ductopenia which was complete in 47.6% of them and severe in 52.4%. All patients with particularly high C trough (> 25 mcg/mL) were found to have total ductopenia. 90.5% of all deferasirox-related adverse events and 100% of major adverse events occurred in the DFX C trough > 10 mcg/mL group. In the DFX C trough < 10 mcg/mL group only one patient interrupted chelation therapy versus 16 (84.2%) patients in the DFX C trough > 10 mcg/mL group. We would recommend a close monitoring in pediatric hematopoietic transplant recipients subjected to deferasirox-based therapy because we have observed a high incidence of adverse events and discontinuation of chelation treatment.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Grevel, J.; Napoli, K.L.; Gibbons, S.
1990-01-01
The measurement of areas under the concentration-time curve (AUC) was recently introduced as an alternative to trough level monitoring of cyclosporine therapy. The AUC is divided by the oral dosing interval to calculate an average concentration. All measurements are performed at clinical steady state. The initial evaluation of AUC monitoring showed advantages over trough level monitoring with concentrations of cyclosporine measured in serum by the polyclonal radioimmunoassay of Sandoz. This assay technique is no longer available and the following assays were performed in parallel during up to 173 AUC determinations in 51 consecutive renal transplant patients: polyclonal fluorescence polarization immunoassaymore » of Abbott in serum, specific and nonspecific monoclonal radioimmunoassays using {sup 3}H and {sup 125}I tracers in serum and whole blood, and high performance liquid chromatography in whole blood. Both trough levels and average concentrations at steady state measured by those different techniques were significantly correlated with the oral dose. The best correlation (r2 = 0.54) was shown by average concentrations measured in whole blood by the specific monoclonal radioimmunoassay of Sandoz ({sup 3}H tracer). This monitoring technique was also associated with the smallest absolute error between repeated observations in the same patient while the oral dose rate remained the same or was changed. Both allegedly specific monoclonal radioimmunoassays (with {sup 3}H and {sup 125}I tracer) measured significantly higher concentrations than the liquid chromatography.« less
NASA Astrophysics Data System (ADS)
Takano, Osamu; Tateishi, Masaaki; Endo, Masataka
2005-05-01
The Pliocene Tamugigawa Formation in the Niigata-Shin'etsu inverted rift basin, Northern Fossa Magna, located in the junction zone of the NE and SW Japan arcs, demonstrates a trough-fill turbidite system, which is topographically controlled in depositional style and shows notable contrasts in depositional architecture from sandy radial-fan-type turbidite systems. The Tamugigawa trough-fill turbidite system shows an elongated morphology parallel to the basin extent and facies associations consisting of trough-fill, lateral-supply and trough-side elements. The trough-fill elements comprise thick-bedded sheet sandstone and sheet-flow turbidite associations, which show sheet-like sedimentation configuration, instead of depositional lobes, without distinct upward fining and coarsening successions. The lateral-supply elements form an intra-trough small fan along a lateral sediment-supply system into the troughs, and consist mainly of coarser-grained distributary-channel fills and sheet sandstones. The trough-side elements consist of slope-mudstone and spillover associations, which were deposited on the structural highs beside the troughs. The Tamugigawa trough-fill turbidites were deposited through three phases: (a) initial ponding stage with thick, sheet sandstones provided by the lateral-supply system, (b) main filling stage with sheet-flow turbidites provided by the longitudinal supply system, and (c) filled-up stage characterized by minor-scale channel-levee systems. Basin-wide tectono-sedimentary studies reveal that the trough-fill turbidites were characteristically formed during the compressional-stress-field stage related to basin inversion. The compressional stress induced basin-floor syndepositional folding and coarse clastic supply from the uplifted provenance, resulting in topographically restricted turbidite deposition within the troughs. In contrast, turbidites of the post-rift stage, prior to basin inversion, show no topographical control because of the simple and wide rift-basin topography, relative to the amount of sediment supply. It is concluded that the trough-fill turbidites of the Niigata-Shin'etsu basin have been strongly affected by basin tectonics in their depositional architecture and formation phases.
The Effect of Age and Weight on Vancomycin Serum Trough Concentrations in Pediatric Patients
Madigan, Theresa; Sieve, Ronald M.; Graner, Kevin K.; Banerjee, Ritu
2013-01-01
Background Vancomycin treatment failure has been associated with low serum vancomycin trough concentrations, prompting recommendations to increase the daily doses in adults and children. Despite more aggressive vancomycin dosing, there continues to be significant variability in vancomycin trough concentrations in pediatric patients. Methods To determine if vancomycin trough concentrations in pediatric patients differ by age and weight, we reviewed records of hospitalized patients who received vancomycin between 2008 and 2012. Patients were divided into groups that received vancomycin 40 mg/kg/day (2008 to 2009) or 60 mg/kg/day (2010 to 2012). Vancomycin trough concentrations were compared between groups and within the 60-mg/kg/day group, stratified by patient age and weight. Results After increasing the vancomycin dose from 40 mg/kg/day to 60 mg/kg/day, initial trough concentrations increased significantly in patients younger than 2 and greater than 6 years of age, but not in patients between the ages of 2 and 5 years. In the 60-mg/kg/day group, only 16.7% of patients between 2 and 5 years of age had initial trough concentrations in the therapeutic range (10 mcg/mL to 20 mcg/mL). Initial trough concentrations were therapeutic in a greater proportion of patients ages 6 years to 12 years (38.7%) and 13 years to 18 years (63.0%). Patients between the ages of 13 and 18 had the highest proportion of supratherapeutic initial vancomycin trough concentrations (14.8%). Patients weighing > 50 kg had significantly higher trough concentrations than patients ≤ 50 kg (17.1 mcg/mL vs. 9.3 mcg/mL; p<0.001). Conclusion Although increasing the vancomycin dose from 40 mg/kg/day to 60 mg/kg/day led to a significant increase in vancomycin trough concentrations, a large proportion of patients receiving 60 mg/kg/day of vancomycin had trough concentrations outside of the therapeutic range. Specifically, patients younger than 6 years tend to have low trough concentrations, while adolescents and children > 50 kg are more likely to have elevated trough concentrations. Vancomycin dosing strategies in pediatric patients should consider age and weight as well as renal function and indication. PMID:23864541
GPS/acoustic Seafloor Geodetic Observations Near the Nankai Trough Axis
NASA Astrophysics Data System (ADS)
Tadokoro, K.; Yasuda, K.; Fujii, C.; Watanabe, T.; Nagai, S.
2013-12-01
The GPS/acoustic seafloor geodetic observation system, which uses precise acoustic ranging and kinematic GPS positioning techniques, has been developed as a useful tool for observing seafloor crustal deformations associated with plate convergence and with earthquakes that occurred in ocean area including the 2011 Tohoku-oki Earthquake of Mw 9.0. Our research group installed eight seafloor benchmarks for this observation system in source areas of anticipated major interplate earthquakes along the Nankai Trough, off southwestern Japan. We have performed campaign measurement for 4-8 years until the end of 2012. The error of displacement rate is almost 5 mm/y through the monitoring for more than four years. At the northern-most potion of the Nankai (Suruga) Trough, the observed steady horizontal displacement rate is 45 mm/y toward west. Also no significant velocity difference is observed across the trough, indicating strong interplate locking up to the shallowest segments. On the other hand, site velocities are 40 mm/y in the direction of N75W at the central region of the Nankai trough, 70-90 km landward from the trough axis. Although this result is the strong evidence for interplate locking, with coupling ratios of 60-80% on the basis of the back-slip model, it has no resolution for the interplate locking at the most-shallowest segments whose depths are 0-10 km. In other words, seaward up-dip limit of locked zone is never resolved from the present seafloor benchmark network [Tadokoro et al., 2012] . Large co-seismic slips larger than 40-50 m on the shallowest interplate segment [Ito et al., 2011; Fujii et al., 2011; Iinuma et al., 2012] are the cause of the unexpected high tsunami that has attacked the pacific coasts of the Tohoku region during the Tohoku-oki Earthquake; it is, therefore, essential to understand slip deficit or strain accumulation condition near the trench axis, also for the anticipated mega-thrust earthquake at the Nankai Trough. For this reason, we installed a new seafloor benchmark in the vicinity of the Nankai Trough axis, about 15 km landward from the trough axis, on July 16, 2013. In addition, we plan to install another new benchmark on the other side of the Nankai Trough in August of this year, to directly measure the motion of the subducting Philippine Sea Plate. The coupling ratio is calculated from slip deficit divided by convergence rate. We can directly 'measure' the coupling ratio from crustal deformation at the newly-installed station on the Philippine Sea Plate, without using global plate motion models. Acknowledgments: We are grateful to the captain and crews of R/V "Asama" of Mie Prefecture Fisheries Research Institute, Japan. This study has been partly promoted by Ministry of Education, Culture, Sports, Science and Technology, Japanese Government.
NASA Technical Reports Server (NTRS)
2006-01-01
25 June 2006 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows v-shaped troughs in the Hephaestus Fossae region of Mars. Light-toned, windblown ripples reside in the very lowest parts of the troughs, as well as on the cratered upland outside the troughs. Boulders and other types of debris, which were derived from the layered rock exposed near the top of the troughs, are seen resting on the trough floors and perched on the sloping trough walls. Location near: 21.1oN, 236.7oW Image width: 3 km (1.9 mi) Illumination from: lower left Season: Northern SpringNASA Astrophysics Data System (ADS)
Ubieta, Eduardo; Hoyo, Itzal del; Valenzuela, Loreto; Lopez-Martín, Rafael; Peña, Víctor de la; López, Susana
2017-06-01
A simulation model of a parabolic-trough solar collector developed in Modelica® language is calibrated and validated. The calibration is performed in order to approximate the behavior of the solar collector model to a real one due to the uncertainty in some of the system parameters, i.e. measured data is used during the calibration process. Afterwards, the validation of this calibrated model is done. During the validation, the results obtained from the model are compared to the ones obtained during real operation in a collector from the Plataforma Solar de Almeria (PSA).
Concentrating Solar Power Projects - Gansu Akesai 50MW Molten Salt Trough
project | Concentrating Solar Power | NREL Gansu Akesai 50MW Molten Salt Trough project Status . Technology: Parabolic trough Turbine Capacity: Net: 50.0 MW Gross: 50.0 MW Status: Under development Do you have more information, corrections, or comments? Background Technology: Parabolic trough Status: Under
Paleocene Pacific Plate reorganization mirrored in formation of the Suvarov Trough, Manihiki Plateau
NASA Astrophysics Data System (ADS)
Pietsch, Ricarda; Uenzelmann-Neben, Gabriele
2016-10-01
The Suvarov Trough is a graben structure that deviates from the Danger Islands Troughs within the Manihiki Plateau, a Large Igneous Province (LIP) located in the Central Pacific. New high-resolution seismic reflection data provide evidence that the graben formed in two phases during the Paleocene (65-45 Ma). In a first phase extension occurred in southwestward direction, pulling apart the northern part of the Suvarov Trough and a parallel trending unnamed trough. In a second phase a change of extensional force direction occurred from southwest to west-northwest, forming the southern part of the Suvarov Trough that extends onto the High Plateau. The formation of the Suvarov Trough is accompanied by a series of normal fault systems that apparently formed simultaneously. Comparing the seismic results to existing Pacific paleo strain reconstructions, the timing of increased strain and local deformation direction fits well to our findings. We thus suggest that the multiple strike directions of the Suvarov Trough represent an extensional structure that was caused by the major, stepwise Pacific Plate reorganization during the Paleocene.
Hua, B; Lee, A; Fan, L; Li, K; Zhang, Y; Poon, M-C; Zhao, Y
2017-05-01
Pharmacokinetics (PK) modelling suggests improvement of trough levels are achieved by using more frequent infusion strategy. However, no clinical study data exists to confirm or quantify improvement in trough level, particularly for low-dose prophylaxis in patients with haemophilia A. To provide evidence that low dose daily (ED) prophylaxis can increase trough levels without increasing FVIII consumption compared to every-other-day (EOD) infusion. A cross-over study on 5 IU kg -1 FVIII daily vs. 10 IU kg -1 EOD infusions, each for 14 days was conducted at the PUMCH-HTC. On the ED schedule, trough (immediate prior to infusion), and peak FVIII:C levels (30 min after infusion) were measured on days 1-5; and trough levels alone on days 7, 9, 11 and 13. For the EOD schedule, troughs, peaks and 4-h postinfusion were measured on day 1; troughs and peaks on days 3, 5, and 7; troughs alone on days 9, 11 and 13 and 24-h postinfusion on days 2, 4 and 6. FVIII inhibitors were assessed on days 0 and 14 during both infusion schedules. Six patients were enrolled. PK evidence showed that daily prophylaxis achieved higher (~2 times) steady-state FVIII trough levels compared to EOD with the same total factor consumption. The daily prophylaxis had good acceptability among patients and reduced chronic pain in the joints in some patients. Our PK study shows low-dose factor VIII daily infusion results in higher trough level than with EOD infusion with similar factor VIII consumption in Chinese adult haemophilia A patients. © 2017 John Wiley & Sons Ltd.
Aeolian sand transport over complex intertidal bar-trough beach topography
NASA Astrophysics Data System (ADS)
Anthony, Edward J.; Ruz, Marie-Hélène; Vanhée, Stéphane
2009-04-01
Aeolian sand transport on macrotidal beaches with complex intertidal bar-trough topography (ridge-and-runnel beaches) was assessed from experiments in northern France that involved measurements of wind speed, saltation, surface moisture contents, and rates of sand trapping across surveyed portions of the upper beach profile. Beaches exhibiting intertidal bars and troughs are much more complex, topographically, than simple reflective or dissipative beaches. Furthermore, the intertidal bar-trough morphology commonly exhibits strong cross-shore variations in the moisture contents of the beach surface and in patterns of bedform development. The results of four 30-minute experiments, conducted along topographically surveyed portions of the upper beach-dune toe profile, show that troughs act as extremely efficient sand interceptors, because of their permanently saturated state, which also inhibits sand mobilisation. Troughs, thus, limit or segment the dry fetch during conditions of intermittent saltation. Flow lines, inferred from the wind profiles, suggest that complex interactions at the boundary layer are generated by the bar-trough topography. Troughs systematically appear to be characterised by air expansion, while bar faces generate ramp wind acceleration for onshore winds, and sometimes immediate downwind deceleration for offshore winds. These effects may also contribute to cross-shore variations in the rates of sand trapping. Finally, a simple conceptual model of effective fetch development, integrating the effects of the spring-neap tidal range and of gross bar-trough morphological variability over time, is proposed for bar-trough beaches. The model highlights the key theme of fetch segmentation induced by cross-shore differentiation in the moisture contents of the beach surface hinged on the complex topography of multiple bars and troughs.
Are Vancomycin Trough Concentrations Adequate for Optimal Dosing?
Youn, Gilmer; Jones, Brenda; Jelliffe, Roger W.; Drusano, George L.; Rodvold, Keith A.; Lodise, Thomas P.
2014-01-01
The current vancomycin therapeutic guidelines recommend the use of only trough concentrations to manage the dosing of adults with Staphylococcus aureus infections. Both vancomycin efficacy and toxicity are likely to be related to the area under the plasma concentration-time curve (AUC). We assembled richly sampled vancomycin pharmacokinetic data from three studies comprising 47 adults with various levels of renal function. With Pmetrics, the nonparametric population modeling package for R, we compared AUCs estimated from models derived from trough-only and peak-trough depleted versions of the full data set and characterized the relationship between the vancomycin trough concentration and AUC. The trough-only and peak-trough depleted data sets underestimated the true AUCs compared to the full model by a mean (95% confidence interval) of 23% (11 to 33%; P = 0.0001) and 14% (7 to 19%; P < 0.0001), respectively. In contrast, using the full model as a Bayesian prior with trough-only data allowed 97% (93 to 102%; P = 0.23) accurate AUC estimation. On the basis of 5,000 profiles simulated from the full model, among adults with normal renal function and a therapeutic AUC of ≥400 mg · h/liter for an organism for which the vancomycin MIC is 1 mg/liter, approximately 60% are expected to have a trough concentration below the suggested minimum target of 15 mg/liter for serious infections, which could result in needlessly increased doses and a risk of toxicity. Our data indicate that adjustment of vancomycin doses on the basis of trough concentrations without a Bayesian tool results in poor achievement of maximally safe and effective drug exposures in plasma and that many adults can have an adequate vancomycin AUC with a trough concentration of <15 mg/liter. PMID:24165176
Contreiras, Claire; Legal, Michael; Lau, Tim T Y; Thalakada, Rosanne; Shalansky, Stephen; Ensom, Mary H H
2014-01-01
Background: In the past, impurities in vancomycin formulations were thought to contribute to nephrotoxicity. In contrast, when current, purer formulations are dosed at conventional trough levels (i.e., 5–15 mg/L), the incidence of nephrotoxicity is relatively low. Recent guidelines have recommended targeting higher vancomycin trough levels in treatment of complicated methicillin-resistant Staphylococcus aureus infections. Dosing based on these higher trough levels may be associated with nephrotoxicity, so the potential risk factors for vancomycin-associated nephrotoxicity require clearer definition. Objectives: To determine the occurrence of nephrotoxicity in patients receiving more than 7 days of vancomycin therapy with high trough levels (15–20 mg/L) and to identify and evaluate specific risk factors related to development of vancomycin-associated nephrotoxicity (i.e., serum creatinine ≥ 44.2 μmol/L or increase ≥ 50% [i.e., ≥ 26.2 μmol/L] from baseline on 2 consecutive days). Methods: Health care records were reviewed for patients seen at 2 major teaching hospitals between January 2008 and March 2011. Patients who had attained high trough levels of vancomycin were screened for eligibility. Patients with unstable renal function, those undergoing hemodialysis, and those for whom dosage and/or sampling times were unclear were excluded. Univariate and multivariate analyses were performed to identify risk factors associated with nephrotoxicity. Univariate variables with p < 0.1 were included in the logistic regression model. Results: Of the 176 patients with high trough levels included in the analysis, 24 (14%) experienced nephrotoxicity. In univariate analysis, admission to a general medicine unit (the setting of care for 16 [67%] of the 24 patients with nephrotoxicity) and extended duration of vancomycin treatment were identified as risk factors for nephrotoxicity (p < 0.1). Other risk factors included gastrointestinal comorbidity (p = 0.056), malignancy (p = 0.044), and febrile neutropenia (p = 0.032). Multivariate analysis identified treatment on general medicine units and treatment courses longer than 7 days as independent predictors of vancomycin-associated nephrotoxicity. Conclusion: Patients being treated on general medicine units and those receiving vancomycin for more than 7 days had an increased likelihood of experiencing nephrotoxicity. The increased risk for patients on general medicine units is likely multifactorial. The relationship between treatment duration and risk of nephrotoxicity appeared to be linear. When using extended-duration, high-trough vancomycin therapy, clinicians should be vigilant in monitoring for nephrotoxicity. PMID:24799722
USAF solar thermal applications overview
NASA Technical Reports Server (NTRS)
Hauger, J. S.; Simpson, J. A.
1981-01-01
Process heat applications were compared to solar thermal technologies. The generic process heat applications were analyzed for solar thermal technology utilization, using SERI's PROSYS/ECONOMAT model in an end use matching analysis and a separate analysis was made for solar ponds. Solar technologies appear attractive in a large number of applications. Low temperature applications at sites with high insolation and high fuel costs were found to be most attractive. No one solar thermal technology emerges as a clearly universal or preferred technology, however,, solar ponds offer a potential high payoff in a few, selected applications. It was shown that troughs and flat plate systems are cost effective in a large number of applications.
Evaluation of the trough-type rain gage
Irvin C. Reigner
1964-01-01
Although infrequently used, the trough-type rain gage has been described as aerodynamically the most efficient of gages (Hayes and Kittredge 1949). This applies only to the commercial semicircular eave-gutter type of trough and not to troughs rectangular in cross-section. The latter, as well as the upright cylindrical type of gage, produces greater disturbances in the...
Multi-Scale Peak and Trough Detection Optimised for Periodic and Quasi-Periodic Neuroscience Data.
Bishop, Steven M; Ercole, Ari
2018-01-01
The reliable detection of peaks and troughs in physiological signals is essential to many investigative techniques in medicine and computational biology. Analysis of the intracranial pressure (ICP) waveform is a particular challenge due to multi-scale features, a changing morphology over time and signal-to-noise limitations. Here we present an efficient peak and trough detection algorithm that extends the scalogram approach of Scholkmann et al., and results in greatly improved algorithm runtime performance. Our improved algorithm (modified Scholkmann) was developed and analysed in MATLAB R2015b. Synthesised waveforms (periodic, quasi-periodic and chirp sinusoids) were degraded with white Gaussian noise to achieve signal-to-noise ratios down to 5 dB and were used to compare the performance of the original Scholkmann and modified Scholkmann algorithms. The modified Scholkmann algorithm has false-positive (0%) and false-negative (0%) detection rates identical to the original Scholkmann when applied to our test suite. Actual compute time for a 200-run Monte Carlo simulation over a multicomponent noisy test signal was 40.96 ± 0.020 s (mean ± 95%CI) for the original Scholkmann and 1.81 ± 0.003 s (mean ± 95%CI) for the modified Scholkmann, demonstrating the expected improvement in runtime complexity from [Formula: see text] to [Formula: see text]. The accurate interpretation of waveform data to identify peaks and troughs is crucial in signal parameterisation, feature extraction and waveform identification tasks. Modification of a standard scalogram technique has produced a robust algorithm with linear computational complexity that is particularly suited to the challenges presented by large, noisy physiological datasets. The algorithm is optimised through a single parameter and can identify sub-waveform features with minimal additional overhead, and is easily adapted to run in real time on commodity hardware.
Funding oncology clinical trials: are cooperative group trials sustainable?
Seow, Hsien-Yeang; Whelan, Patrick; Levine, Mark N; Cowan, Kathryn; Lysakowski, Barbara; Kowaleski, Brenda; Snider, Anne; Xu, Rebecca Y; Arnold, Andrew
2012-05-01
Many oncology clinical trials departments (CTDs) are in serious fiscal deficit and their sustainability is in jeopardy. This study investigates whether the payment models used to fund industry versus cooperative group trials contribute to the fiscal deficit of a CTD. We examined the lifetime costs of all cooperative group and industry trials activated in the CTD of a cancer center between 2007 and 2011. A trial's lifetime is defined as being from the date the first patient was accrued until the last patient's actual or projected final follow-up visit. For each trial, we calculated the lifetime monthly net income, which was defined as monthly revenue minus monthly costs. Data sources included study protocols, trial budgets, and accrual data. Of the 97 trials analyzed, 64 (66%) were cooperative group trials. The pattern of lifetime net income for cooperative group trials has a positive peak during patient accrual followed by a negative trough during follow-up. In contrast, the pattern for industry trials resembled an "l" shape. The patterns reflect the differing payment models: upfront lump-sum payments (cooperative group) versus milestone payments (industry). The negative trough in the lifetime net income of a cooperative group trial occurs because follow-up costs are typically not funded or are underfunded. CTDs accrue more patients in new trials to offset that deficit. The CTD uses revenue from accrual to existing trials to cross-subsidize past trials in follow-up. As the number of patients on follow-up increases, the fiscal deficit grows larger each year, perpetuating the cycle.
NASA Astrophysics Data System (ADS)
Guo, Minghuan; Wang, Zhifeng; Sun, Feihu
2016-05-01
The optical efficiencies of a solar trough concentrator are important to the whole thermal performance of the solar collector, and the outer surface of the tube absorber is a key interface of energy flux. So it is necessary to simulate and analyze the concentrated solar flux density distributions on the tube absorber of a parabolic trough solar collector for various sun beam incident angles, with main optical errors considered. Since the solar trough concentrators are linear focusing, it is much of interest to investigate the solar flux density distribution on the cross-section profile of the tube absorber, rather than the flux density distribution along the focal line direction. Although a few integral approaches based on the "solar cone" concept were developed to compute the concentrated flux density for some simple trough concentrator geometries, all those integral approaches needed special integration routines, meanwhile, the optical parameters and geometrical properties of collectors also couldn't be changed conveniently. Flexible Monte Carlo ray trace (MCRT) methods are widely used to simulate the more accurate concentrated flux density distribution for compound parabolic solar trough concentrators, while generally they are quite time consuming. In this paper, we first mainly introduce a new backward ray tracing (BRT) method combined with the lumped effective solar cone, to simulate the cross-section flux density on the region of interest of the tube absorber. For BRT, bundles of rays are launched at absorber-surface points of interest, directly go through the glass cover of the absorber, strike on the uniformly sampled mirror segment centers in the close-related surface region of the parabolic reflector, and then direct to the effective solar cone around the incident sun beam direction after the virtual backward reflection. All the optical errors are convoluted into the effective solar cone. The brightness distribution of the effective solar cone is supposed to be circular Gaussian type. Then a parabolic trough solar collector of Euro Trough 150 is used as an example object to apply this BRT method. Euro Trough 150 is composed of RP3 mirror facets, with the focal length of 1.71m, aperture width of 5.77m, outer tube diameter of 0.07m. Also to verify the simulated flux density distributions, we establish a modified MCRT method. For this modified MCRT method, the random rays with weighted energy elements are launched in the close-related rectangle region in the aperture plane of the parabolic concentrator and the optical errors are statistically modeled in the stages of forward ray tracing process. Given the same concentrator geometric parameters and optical error values, the simulated results from these two ray tracing methods are in good consistence. The two highlights of this paper are the new optical simulation method, BRT, and figuring out the close-related mirror surface region for BRT and the close-related aperture region for MCRT in advance to effectively simulate the solar flux distribution on the absorber surface of a parabolic trough collector.
A review of Andasol 3 and perspective for parabolic trough CSP plants in South Africa
NASA Astrophysics Data System (ADS)
Dinter, Frank; Möller, Lucas
2016-05-01
Andasol 3 is a 50 MW parabolic trough concentrating solar power plant with thermal energy storage in Andalusia, southern Spain. Having started operating in 2011 as one of the first plants of its kind in Spain it has been followed by more than 50 in the country since. For the reason that CSP plants with storage have the potential to compete against fossil fuel fired plants much better than any other renewable energy source a long-term review of such a plant operating on a commercial scale is needed. With data at hand documenting Andasol 3's operation over the course of one year between July 2013 and June 2014 we intend to provide such a review. We calculated the plants overall efficiency, its capacity factor, the gross energy generation as well as auxiliary powers on a monthly basis to reflect upon its overall performance. It was also looked at the benefits caused by the thermal energy storage and especially how steadily and reliably the plant was able to operate. With basic background information about physical, geographical and meteorological aspects influencing the solar resource, its variation and a CSP plant's performance a qualitative estimation for a parabolic trough plant located in South Africa was made.
Ramírez, Carlos; León, Noel; García, Héctor; Aguayo, Humberto
2015-06-01
Solar tracking concentrators are optical systems that collect the solar energy flux either in a line or spot using reflective or refractive surfaces. The main problem with these surfaces is their manufacturing complexity, especially at large scales. In this paper, a line-to-spot solar tracking concentrator is proposed. Its configuration allows for a low-cost solar concentrator system. It consists of a parabolic trough collector (PTC) and a two-section PMMA Fresnel lens (FL), both mounted on a two-axis solar tracker. The function of the PTC is to reflect the incoming solar radiation toward a line. Then, the FL, which is placed near the focus, transforms this line into a spot by refraction. It was found that the system can achieve a concentration ratio of 100x and concentrate an average solar irradiance of 518.857W/m2 with an average transmittance of 0.855, taking into account the effect of the chromatic aberration.
Continuous coating of silicon-on-ceramic
NASA Technical Reports Server (NTRS)
Heaps, J. D.; Schuldt, S. B.; Grung, B. L.; Zook, J. D.; Butter, C. D.
1980-01-01
Growth of sheet silicon on low-cost substrates has been demonstrated by the silicon coating with inverted meniscus (SCIM) technique. A mullite-based ceramic substrate is coated with carbon and then passed over a trough of molten silicon with a raised meniscus. Solidification occurs at the trailing edge of the downstream meniscus, producing a silicon-on-ceramic (SOC) layer. Meniscus shape and stability are controlled by varying the level of molten silicon in a reservoir connected to the trough. The thermal conditions for growth and the crystallographic texture of the SOC layers are similar to those produced by dip-coating, the original technique of meniscus-controlled growth. The thermal conditions for growth have been analyzed in some detail. The analysis correctly predicts the velocity-thickness relationship and the liquid-solid interface shape for dip-coating, and appears to be equally applicable to SCIM-coating. Solar cells made from dip-coated SOC material have demonstrated efficiencies of 10% on 4-sq cm cells and 9.9% on 10-sq cm cells.
Method and apparatus for measuring shear modulus and viscosity of a monomolecular film
Abraham, B.M.; Miyano, K.; Ketterson, J.B.
1983-10-18
Apparatus for measuring the shear modulus of a monomolecular film comprises a circular trough having inwardly sloping sides containing a liquid for supporting the monolayer on the surface thereof; a circular rotor suspended above the trough such that the lower surface of the rotor contacts the surface of the liquid, positioned such that the axis of the rotor is concentric with the axis of the trough and freely rotable about its axis; means for hydrostatically compressing the monolayer in the annular region formed between the rotor and the sides of the trough; and means for rotating the trough about its axis. Preferably, hydrostatic compression of the monolayer is achieved by removing liquid from the bottom of the trough (decreasing the surface area) while raising the trough vertically along its axis to maintain the monolayer at a constant elevation (and maintain rotor contact). In order to measure viscosity, a means for rotating the rotor about its axis is added to the apparatus.
Method and apparatus for measuring shear modulus and viscosity of a monomolecular film
Abraham, Bernard M.; Miyano, Kenjiro; Ketterson, John B.
1985-01-01
Instrument for measuring the shear modulus of a monomolecular film comprises a circular trough having inwardly sloping sides containing a liquid for supporting the monolayer on the surface thereof; a circular rotor suspended above the trough such that the lower surface of the rotor contacts the surface of the liquid, positioned such that the axis of the rotor is concentric with the axis of the trough and freely rotable about its axis; apparatus for hydrostatically compressing the monolayer in the annular region formed between the rotor and the sides of the trough; and apparatus for rotating the trough about its axis. Preferably, hydrostatic compression of the monolayer is achieved by removing liquid from the bottom of the trough (decreasing the surface area) while raising the trough vertically along its axis to maintain the monolayer at a constant elevation (and maintain rotor contact). In order to measure viscosity, a apparatus for rotating the rotor about its axis is added to the apparatus.
NCAR CCM2 simulation of the modern Antarctic climate
NASA Technical Reports Server (NTRS)
Tzeng, Ren-Yow; Bromwich, David H.; Parish, Thomas R.; Chen, Biao
1994-01-01
The National Center for Atmospheric Research (NCAR) community climate model version 2 (CCM2) simulation of the circumpolar trough, surface air temperature, the polar vortex, cloudiness, winds, and atmospheric moisture and energy budgets are examined to validate the model's representation of the present-day Antarctic climate. The results show that the CCM2 can well simulate many important climate features over Antarctica, such as the location and intensity of the circumpolar trough, the coreless winter over the plateau, the intensity and horizontal distribution of the surface inversion, the speed and streamline pattern of the katabatic winds, the double jet stream feature over the southern Indian and Pacific oceans, and the arid climate over the continent. However, there are also some serious errors in the model. Some are due to old problems but some are caused by the new parameterizations in the model. The model errors over high southern latitudes can be summarized as follows: The circumpolar trough, the polar vertex, and the westerlies in midlatitudes are too strong; the semiannual cycle of the circumpolar trough is distorted compared to the observations; the low centers of the circumpolar trough and the troughs in the middle and upper troposphere are shifted eastward by 15 deg - 40 deg longitude; the surface temperatures are too cold over the plateau in summer and over the coastline in winter; the polar tropopause continues to have a cold bias; and the cloudiness is too high over the continent. These biases are induced by two major factors: (1) the cloud optical properties in tropical and middle latitudes, which cause the eastward shift of troughs and surface low centers and the error in the semiannual cycle, and (2) the cold bias of the surface air temperature, which is attributed to the oversimulation of cloudiness over the continent, especially during summer, and the uniform 2-m-thick sea ice. The constant thickness of sea ice suppresses the energy flux from the ocean to the atmosphere and hence reduces the air temperature near the coast during winter. Finally, although the simulated Antarctic climate still suffers these biases, the overall performance of the CCM2 is much better than that of the CCM1-T42. Therefore the CCM2 is good enough to be used for climate change studies, especially over Antarctica.
Theory and design of line-to-point focus solar concentrators with tracking secondary optics.
Cooper, Thomas; Ambrosetti, Gianluca; Pedretti, Andrea; Steinfeld, Aldo
2013-12-10
The two-stage line-to-point focus solar concentrator with tracking secondary optics is introduced. Its design aims to reduce the cost per m(2) of collecting aperture by maintaining a one-axis tracking trough as the primary concentrator, while allowing the thermodynamic limit of concentration in 2D of 215× to be significantly surpassed by the implementation of a tracking secondary stage. The limits of overall geometric concentration are found to exceed 4000× when hollow secondary concentrators are used, and 6000× when the receiver is immersed in a dielectric material of refractive index n=1.5. Three exemplary collectors, with geometric concentrations in the range of 500-1500× are explored and their geometric performance is ascertained by Monte Carlo ray-tracing. The proposed solar concentrator design is well-suited for large-scale applications with discrete, flat receivers requiring concentration ratios in the range 500-2000×.
de la Loge, Christine; Tugaut, Béatrice; Fofana, Fatoumata; Lambert, Jérémy; Hennig, Michael; Tschiesner, Uta; Vahdati-Bolouri, Mitra; Segun Ismaila, Afisi; Suresh Punekar, Yogesh
2016-03-15
Background: This meta-analysis assessed the relationship between change from baseline (CFB) in spirometric measurements (trough forced expiratory volume in 1 second [FEV 1 ] and FEV 1 area under the curve [AUC]) and patient-reported outcomes (St. George's Respiratory Questionnaire total score [SGRQ] CFB, Transition Dyspnea Index [TDI] and exacerbation rates) after 6-12 months' follow-up, using study treatment-group level data. Methods: A systematic literature search was performed for randomized controlled trials of ≥24 weeks duration in adults with chronic obstructive pulmonary disease (COPD). Studies reporting ≥1 spirometric measurement and ≥1 patient-reported outcome (PRO) at baseline and at study endpoint were selected. The relationships between PROs and spirometric endpoints were assessed using Pearson correlation coefficient and meta-regression. Results: Fifty-two studies (62,385 patients) were included. Primary weighted analysis conducted at the last assessment showed a large significant negative correlation (r, -0.68 [95% confidence interval (CI); -0.77, -0.57]) between trough FEV 1 and SGRQ. Improvement of 100 mL in trough FEV 1 corresponded to a 5.9 point reduction in SGRQ. Similarly, a reduction of 4 points on SGRQ corresponded to 40 mL improvement in trough FEV 1 ( p <0.001). The weighted correlation coefficients of trough FEV 1 with TDI, exacerbation rate (all) and exacerbation rate (moderate/severe) at last assessment point were 0.57, -0.69 and -0.57, respectively (all p <0.05). For the analyses excluding placebo groups, the correlations of FEV 1 with SGRQ and TDI were lower but significant. Conclusions: A strong association exists between changes in spirometric measurements and changes in PROs.
de la Loge, Christine; Tugaut, Béatrice; Fofana, Fatoumata; Lambert, Jérémy; Hennig, Michael; Tschiesner, Uta; Vahdati-Bolouri, Mitra; Segun Ismaila, Afisi; Suresh Punekar, Yogesh
2016-01-01
Background: This meta-analysis assessed the relationship between change from baseline (CFB) in spirometric measurements (trough forced expiratory volume in 1 second [FEV1] and FEV1 area under the curve [AUC]) and patient-reported outcomes (St. George’s Respiratory Questionnaire total score [SGRQ] CFB, Transition Dyspnea Index [TDI] and exacerbation rates) after 6-12 months’ follow-up, using study treatment-group level data. Methods: A systematic literature search was performed for randomized controlled trials of ≥24 weeks duration in adults with chronic obstructive pulmonary disease (COPD). Studies reporting ≥1 spirometric measurement and ≥1 patient-reported outcome (PRO) at baseline and at study endpoint were selected. The relationships between PROs and spirometric endpoints were assessed using Pearson correlation coefficient and meta-regression. Results: Fifty-two studies (62,385 patients) were included. Primary weighted analysis conducted at the last assessment showed a large significant negative correlation (r, −0.68 [95% confidence interval (CI); −0.77, −0.57]) between trough FEV1 and SGRQ. Improvement of 100 mL in trough FEV1 corresponded to a 5.9 point reduction in SGRQ. Similarly, a reduction of 4 points on SGRQ corresponded to 40 mL improvement in trough FEV1 (p<0.001). The weighted correlation coefficients of trough FEV1 with TDI, exacerbation rate (all) and exacerbation rate (moderate/severe) at last assessment point were 0.57, -0.69 and -0.57, respectively (all p<0.05). For the analyses excluding placebo groups, the correlations of FEV1 with SGRQ and TDI were lower but significant. Conclusions: A strong association exists between changes in spirometric measurements and changes in PROs. PMID:28848877
Evaluation of risk factors for vancomycin-induced nephrotoxicity.
Park, So Jin; Lim, Na Ri; Park, Hyo Jung; Yang, Jae Wook; Kim, Min-Ji; Kim, Kyunga; In, Yong Won; Lee, Young Mee
2018-05-09
Background Vancomycin is a glycopeptide antibiotic of choice for the treatment of serious infections caused by multi-resistant Gram-positive bacteria. However, vancomycin-associated nephrotoxicity (VAN) often limits its use. Previous data suggested a few risk factors of VAN, including higher mean vancomycin trough level, higher daily doses, old age, long duration of vancomycin therapy, and concomitant nephrotoxins. Objective To evaluate the incidence and risk factors of VAN and determine whether higher vancomycin trough concentrations were associated with a greater risk for VAN. Settings A retrospective, observational, single-center study at the 1960-bed university-affiliated tertiary care hospital (Samsung Medical Center), Seoul, Korea. Method A retrospective analysis of adult patients who received vancomycin parenterally in a tertiary care medical center from March 1, 2013 to June 30, 2013 was performed. We excluded patients with a baseline serum creatinine level > 2 mg/dL and those who had a history of end-stage renal disease and dialysis at baseline. The clinical characteristics were compared between patients with nephrotoxicity and those without nephrotoxicity to identify the risk factors associated with VAN. Main outcome measure Incidence of VAN and VAN-associated risk factors were analyzed. Results Of the 315 vancomycin-treated patients, nephrotoxicity occurred in 15.2% of the patients. In multivariate analysis, higher vancomycin trough concentrations of > 20 mg∕L (OR 9.57, 95% CI 2.49-36.83, p < 0.01) and intensive care unit (ICU) residence (OR 2.86, 95% CI 1.41-5.82, p < 0.01) were independently associated with VAN. Conclusion Our findings suggest that higher vancomycin trough levels and ICU residence might be associated with a greater risk for VAN. More careful monitoring of vancomycin serum trough levels and patient status might facilitate the timely prevention of VAN.
Field Characterization | Concentrating Solar Power | NREL
receivers for performance issues. It uses an infrared (IR) camera, global positioning system (GPS each row of a parabolic trough plant, using the GPS data to automate IR imaging and analyze
Concentrating Solar Power Projects in China | Concentrating Solar Power |
Delingha 50MW Thermal Oil Parabolic Trough project Gansu Akesai 50MW Molten Salt Trough project Golden Tower 100MW Molten Salt project Golmud Gulang 100MW Thermal Oil Parabolic Trough project Hami 50 MW CSP Yumen 50MW Thermal Oil Trough project Shangyi 50MW DSG Tower CSP project SunCan Dunhuang 10 MW Phase I
Tkachuk, Stacey; Collins, Kyle; Ensom, Mary H H
2018-04-01
In adults, the area under the concentration-time curve (AUC) divided by the minimum inhibitory concentration (MIC) is associated with better clinical and bacteriological response to vancomycin in patients with methicillin-resistant Staphylococcus aureus who achieve target AUC/MIC ≥ 400. This target is often extrapolated to pediatric patients despite the lack of similar evidence. The impracticalities of calculating the AUC in practice means vancomycin trough concentrations are used to predict the AUC/MIC. This review aimed to determine the relationship between vancomycin trough concentrations and AUC/MIC in pediatric patients. We searched the MEDLINE and Embase databases, the Cochrane Database of Systematic Reviews, and the Cochrane Central Register of Controlled Trials using the medical subject heading (MeSH) terms vancomycin and AUC and pediatric* or paediatric*. Articles were included if they were published in English and reported a relationship between vancomycin trough concentrations and AUC/MIC. Of 122 articles retrieved, 11 met the inclusion criteria. One trial reported a relationship between vancomycin trough concentrations, AUC/MIC, and clinical outcomes but was likely underpowered. Five studies found troughs 6-10 mg/l were sufficient to attain an AUC/MIC > 400 in most general hospitalized pediatric patients. One study in patients undergoing cardiothoracic surgery found a trough of 18.4 mg/l achieved an AUC/MIC > 400. Two oncology studies reported troughs ≥ 15 mg/l likely attained an AUC/MIC ≥ 400. In critical care patients: one study found a trough of 9 mg/l did not attain the AUC/MIC target; another found 7 mg/l corresponded to an AUC/MIC of 400. Potential vancomycin targets varied based on the population studied but, for general hospitalized pediatric patients, troughs of 6-10 mg/l are likely sufficient to achieve AUC/MIC ≥ 400. For MIC ≥ 2 mg/l, higher troughs are likely necessary to achieve an AUC/MIC ≥ 400. More research is needed to determine the relationships between vancomycin trough concentrations, AUC/MIC, and clinical outcomes.
Vancomycin AUC/MIC and Corresponding Troughs in a Pediatric Population
Lardieri, Allison B.; Heil, Emily L.; Morgan, Jill A.
2017-01-01
OBJECTIVES Adult guidelines suggest an area under the curve/minimum inhibitory concentration (AUC/MIC) > 400 corresponds to a vancomycin trough serum concentration of 15 to 20 mg/L for methicillin-resistant Staphylococcus aureus infections, but obtaining these troughs in children are difficult. The primary objective of this study was to assess the likelihood that 15 mg/kg of vancomycin every 6 hours in a child achieves an AUC/MIC > 400. METHODS This retrospective chart review included pediatric patients >2 months to <18 years with a positive S aureus blood culture and documented MIC who received at least two doses of vancomycin with corresponding trough. Patients were divided into two groups: group 1 initially receiving ≥15 mg/kg every 6 hours, and group 2 initially receiving any other dosing ranges or intervals. AUCs were calculated four times using three pharmacokinetic methods. RESULTS A total of 36 patients with 99 vancomycin trough serum concentrations were assessed. Baseline characteristics were similar between groups. For troughs in group 1 (n = 55), the probability of achieving an AUC/MIC > 400 ranged from 16.4% to 90.9% with a median trough concentration of 11.4 mg/L, while in group 2 (n = 44) the probability of achieving AUC/MIC > 400 ranged from 15.9% to 54.5% with mean trough concentration of 9.2 mg/L. The AUC/MICs were not similar between the different pharmacokinetic methods used; however, a trapezoidal equation (Method A) yielded the highest correlation coefficient (r2 = 0.59). When dosing every 6 hours, an AUC/MIC of 400 correlated to a trough serum concentration of 11 mg/L. CONCLUSIONS The probability of achieving an AUC/MIC > 400 using only a trough serum concentration and an MIC with patients receiving 15 mg/kg every 6 hours is variable based on the method used to calculate the AUC. An AUC/MIC of 400 in children correlated to a trough concentration of 11 mg/L using a trapezoidal Method to calculate AUC. PMID:28337080
Vancomycin AUC/MIC and Corresponding Troughs in a Pediatric Population.
Kishk, Omayma A; Lardieri, Allison B; Heil, Emily L; Morgan, Jill A
2017-01-01
Adult guidelines suggest an area under the curve/minimum inhibitory concentration (AUC/MIC) > 400 corresponds to a vancomycin trough serum concentration of 15 to 20 mg/L for methicillin-resistant Staphylococcus aureus infections, but obtaining these troughs in children are difficult. The primary objective of this study was to assess the likelihood that 15 mg/kg of vancomycin every 6 hours in a child achieves an AUC/MIC > 400. This retrospective chart review included pediatric patients >2 months to <18 years with a positive S aureus blood culture and documented MIC who received at least two doses of vancomycin with corresponding trough. Patients were divided into two groups: group 1 initially receiving ≥15 mg/kg every 6 hours, and group 2 initially receiving any other dosing ranges or intervals. AUCs were calculated four times using three pharmacokinetic methods. A total of 36 patients with 99 vancomycin trough serum concentrations were assessed. Baseline characteristics were similar between groups. For troughs in group 1 (n = 55), the probability of achieving an AUC/MIC > 400 ranged from 16.4% to 90.9% with a median trough concentration of 11.4 mg/L, while in group 2 (n = 44) the probability of achieving AUC/MIC > 400 ranged from 15.9% to 54.5% with mean trough concentration of 9.2 mg/L. The AUC/MICs were not similar between the different pharmacokinetic methods used; however, a trapezoidal equation (Method A) yielded the highest correlation coefficient (r 2 = 0.59). When dosing every 6 hours, an AUC/MIC of 400 correlated to a trough serum concentration of 11 mg/L. The probability of achieving an AUC/MIC > 400 using only a trough serum concentration and an MIC with patients receiving 15 mg/kg every 6 hours is variable based on the method used to calculate the AUC. An AUC/MIC of 400 in children correlated to a trough concentration of 11 mg/L using a trapezoidal Method to calculate AUC.
Origin and late quaternary tectonism of a western Canadian continental shelf trough
NASA Astrophysics Data System (ADS)
Moslow, Thomas F.; Luternauer, John L.; Rohr, Kristin
1991-08-01
Analyses of high resolution and multi-channel seismic profiles from the central continental shelf of western Canada ascribe a late Quaternary glacial origin to large-scale troughs. Along the margins of Moresby Trough, one of three large-scale cross-shelf bathymetric depressions in Queen Charlotte Sound, seismic profiles within Quaternary sediments show a divergence of reflectors, thickening and folding of seismic units, and concavity of reflectors suggestive of drag. Compactional subsidence, growth faulting, and compaction faulting are also observed. Fault traces commonly terminate below the seabed. Deformation of Quaternary sediments due to faulting is plastic in nature and maximum offset of reflectors is 2.5 m. The observed Quaternary deformation appears to be a product of rapid deposition, loading and subsidence of late Quaternary sediment, which is unrelated to seismic activity. In addition, Quaternary faulting was probably activated by post-glacial loading and isostatic rebound of consolidated Tertiary strata along the margins of continental shelf troughs. The presence of mass movement (slump or debris flow) deposits overlying lithified Tertiary strata along the flanks of Moresby Trough provides the only evidence of seismic activity in the study area. The lack of a mud drape over these deposits implies a late Holocene age for the timing of their emplacement. The Quaternary troughs are incised into Tertiary-aged sedimentary fill of the Queen Charlotte basin. Previous workers had interpreted seafloor escarpments paralleling the trough margins to indicate that the location of Moresby Trough was controlled by renewed or continued activity on Tertiary-aged faults. A multi-channel seismic line across Moresby Trough shows that such an escarpment on the seafloor does not correlate to faults either in the Tertiary basin fill or the underlying basement. Tertiary reflectors are continuous underneath Moresby Trough; the seafloor escarpment is an erosional feature and was not created by reactivation of Tertiary structures. Trough erosion and subsequent fill (up to 175 m thick) are entirely of Quaternary age.
NASA Astrophysics Data System (ADS)
Broughton, Paul L.
2013-01-01
The sub-Cretaceous paleotopography underlying giant Lower Cretaceous Athabasca oil sands, northern Alberta, has an orthogonal lattice pattern of troughs up to 50 km long and 100 m deep between pairs of cross-cutting lineaments. These structures are interpreted to have been inherited from a similar pattern of dissolution collapse-subsidence troughs in the underlying Middle Devonian salt beds. Removal of more than 100 m of halite salt fragmented the overlying Upper Devonian strata into fault blocks and collapse breccias that subsided into the underlying dissolution troughs. The unusually low 1:2 to 1:3 thickness ratios of halite salts to the overlying strata resulted in the Upper Devonian strata collapse-subsidence into underlying salt dissolution troughs being more cataclysmic during the first phase of salt removal. The second phase of slower but complete salt removal between the earlier troughs resulted in a more gradual subsidence of the overlying strata. This obliterated the earlier pattern of giant cross-cutting dissolution troughs bounded by major lineaments. The collapse breccia fabrics underlying the earlier troughs differ from those from areas between the troughs. Collapse breccias underlying the large troughs often have crushed fabrics distributed in zones that rapidly pinched out between fault blocks. Breccias between troughs developed as giant mosaics of detached carbonate blocks that formed breccia pipe complexes. Multiple sinkholes up to 100 m deep aligned along multi-km linear valley trends that dissected the sub-Cretaceous paleotopography. These sinkhole trends formed orthogonal patterns inherited from underlying lattice of NW-SE and NE-SW salt structured lineaments. These cross-cutting sinkhole trends have a smaller 5 km scale reticulate pattern similar to the giant 50 km scale pattern of collapse-subsidence troughs. Other sinkholes developed as lower McMurray strata sagged when underlying Devonian fault blocks and breccia pipes differentially subsided.
Projection of distributed-collector solar-thermal electric power plant economics to years 1990-2000
NASA Technical Reports Server (NTRS)
Fujita, T.; Elgabalawi, N.; Herrera, G.; Turner, R. H.
1977-01-01
A preliminary comparative evaluation of distributed-collector solar thermal power plants was undertaken by projecting power plant economics of selected systems to the 1990 to 2000 time frame. The selected systems include: (1) fixed orientation collectors with concentrating reflectors and vacuum tube absorbers, (2) one axis tracking linear concentrator including parabolic trough and variable slat designs, and (3) two axis tracking parabolic dish systems including concepts with small heat engine-electric generator assemblies at each focal point as well as approaches having steam generators at the focal point with pipeline collection to a central power conversion unit. Comparisons are presented primarily in terms of energy cost and capital cost over a wide range of operating load factors. Sensitvity of energy costs for a range of efficiency and cost of major subsystems/components is presented to delineate critical technological development needs.
Cyclosporine and ketoconazole for the treatment of perianal fistulas in dogs.
Patricelli, Alison J; Hardie, Robert J; McAnulty, Jonathan E
2002-04-01
To evaluate efficacy and cost of using cyclosporine and ketoconazole for the treatment of perianal fistulas in dogs. Clinical trial. 12 dogs with perianal fistulas. Dogs received cyclosporine and ketoconazole orally (target whole blood trough cyclosporine concentrations of 400 to 600 ng/ml). Study endpoints were resolution of clinical signs, remission, and recurrence of disease. Adverse effects and cost of medications were reported. Results were compared with those from previous studies in humans and in dogs in which single agent cyclosporine treatment for perianal fistulas was used. All dogs had resolution of clinical signs. Eight dogs went into remission; however, 5 of those 8 had recurrence of fistulas. Adverse effects of treatment were minimal and well tolerated. Cost of treatment was comparable to traditional surgical options and less than single agent cyclosporine treatment. Administration of cyclosporine with ketoconazole is an effective and cost-comparable treatment for perianal fistulas in dogs.
NASA Astrophysics Data System (ADS)
Sourbier, F.; Operto, S.; Virieux, J.
2006-12-01
We present a distributed-memory parallel algorithm for 2D visco-acoustic full-waveform inversion of wide-angle seismic data. Our code is written in fortran90 and use MPI for parallelism. The algorithm was applied to real wide-angle data set recorded by 100 OBSs with a 1-km spacing in the eastern-Nankai trough (Japan) to image the deep structure of the subduction zone. Full-waveform inversion is applied sequentially to discrete frequencies by proceeding from the low to the high frequencies. The inverse problem is solved with a classic gradient method. Full-waveform modeling is performed with a frequency-domain finite-difference method. In the frequency-domain, solving the wave equation requires resolution of a large unsymmetric system of linear equations. We use the massively parallel direct solver MUMPS (http://www.enseeiht.fr/irit/apo/MUMPS) for distributed-memory computer to solve this system. The MUMPS solver is based on a multifrontal method for the parallel factorization. The MUMPS algorithm is subdivided in 3 main steps: a symbolic analysis step that performs re-ordering of the matrix coefficients to minimize the fill-in of the matrix during the subsequent factorization and an estimation of the assembly tree of the matrix. Second, the factorization is performed with dynamic scheduling to accomodate numerical pivoting and provides the LU factors distributed over all the processors. Third, the resolution is performed for multiple sources. To compute the gradient of the cost function, 2 simulations per shot are required (one to compute the forward wavefield and one to back-propagate residuals). The multi-source resolutions can be performed in parallel with MUMPS. In the end, each processor stores in core a sub-domain of all the solutions. These distributed solutions can be exploited to compute in parallel the gradient of the cost function. Since the gradient of the cost function is a weighted stack of the shot and residual solutions of MUMPS, each processor computes the corresponding sub-domain of the gradient. In the end, the gradient is centralized on the master processor using a collective communation. The gradient is scaled by the diagonal elements of the Hessian matrix. This scaling is computed only once per frequency before the first iteration of the inversion. Estimation of the diagonal terms of the Hessian requires performing one simulation per non redondant shot and receiver position. The same strategy that the one used for the gradient is used to compute the diagonal Hessian in parallel. This algorithm was applied to a dense wide-angle data set recorded by 100 OBSs in the eastern Nankai trough, offshore Japan. Thirteen frequencies ranging from 3 and 15 Hz were inverted. Tweny iterations per frequency were computed leading to 260 tomographic velocity models of increasing resolution. The velocity model dimensions are 105 km x 25 km corresponding to a finite-difference grid of 4201 x 1001 grid with a 25-m grid interval. The number of shot was 1005 and the number of inverted OBS gathers was 93. The inversion requires 20 days on 6 32-bits bi-processor nodes with 4 Gbytes of RAM memory per node when only the LU factorization is performed in parallel. Preliminary estimations of the time required to perform the inversion with the fully-parallelized code is 6 and 4 days using 20 and 50 processors respectively.
Pc-5 wave power in the plasmasphere and trough: CRRES observations
NASA Astrophysics Data System (ADS)
Hartinger, M.; Moldwin, M.; Angelopoulos, V.; Takahashi, K.; Singer, H. J.; Anderson, R. R.
2009-12-01
The CRRES (Combined Release and Radiation Effects Satellite) mission provides an opportunity to study the distribution of MHD wave power in the inner magnetosphere both inside the high-density plasmasphere and in the low-density trough. We present a statistical survey of Pc-5 wave power using CRRES magnetometer and plasma wave data separated into plasmasphere and trough intervals. Using a database of plasmapause crossings, we examined differences in power spectral density between the plasmasphere and trough regions. We found significant differences between the plasmasphere and trough in the radial profiles of Pc-5 wave power. On average, wave power was higher in the trough, but the difference in power depended on magnetic local time. Our study shows that determining the plasmapause location is important for understanding and modeling the MHD wave environment in the Pc-5 frequency band.
NASA Technical Reports Server (NTRS)
Taylor, H. A., Jr.
1972-01-01
A distinct feature of the ion composition results from the OGO-2, 4 and 6 satellites is the light ion trough, wherein the mid-latitude concentrations of H+ and He+ decrease sharply with latitude. In contrast to the 'main trough' in electron density observed primarily as a nightside phenomenon, the light ion trough persists during both day and night. For daytime winter hemisphere conditions and for all seasons during night, the mid-latitude light ion concentration decrease is a pronounced feature. In the dayside summer and equinox hemispheres, the rate of light ion decrease with latitude is comparatively gradual, and the trough boundary is less well defined, particularly for quiet magnetic conditions. In response to magnetic storms, the light ion trough minimum moves equatorward, and deepens, consistent with earlier evidence of the contraction of the plasmasphere in response to storm time enhancements in magnetospheric plasma convection.
Stoessel, Andrew M; Hale, Cory M; Seabury, Robert W; Miller, Christopher D; Steele, Jeffrey M
2018-01-01
This study aimed to assess the impact of area under the curve (AUC)-based vancomycin monitoring on pharmacist-initiated dose adjustments after transitioning from a trough-only to an AUC-based monitoring method at our institution. A retrospective cohort study of patients treated with vancomycin for complicated methicillin-resistant Staphylococcus aureus (MRSA) infection between November 2013 and December 2016 was conducted. The frequency of pharmacist-initiated dose adjustments was assessed for patients monitored via trough-only and AUC-based approaches for trough ranges: 10 to 14.9 mg/L and 15 to 20 mg/L. Fifty patients were included: 36 in the trough-based monitoring and 14 in the AUC-based-monitoring group. The vancomycin dose was increased in 71.4% of patients when troughs were 10 to 14.9 mg/L when a trough-only approach was used and in only 25% of patients when using AUC estimation ( P = .048). In the AUC group, the dose was increased only when AUC/minimum inhibitory concentration (MIC) <400; unchanged regimens had an estimated AUC/MIC ≥400. The AUC-based monitoring did not significantly increase the frequency of dose reductions when trough concentrations were 15 to 20 mg/L (AUC: 33.3% vs trough: 4.6%; P = .107). The AUC-based monitoring resulted in fewer patients with dose adjustments when trough levels were 10 to 14.9 mg/L. The AUC-based monitoring has the potential to reduce unnecessary vancomycin exposure and warrants further investigation.
Fabrication of trough-shaped solar collectors
Schertz, William W.
1978-01-01
There is provided a radiant energy concentration and collection device formed of a one-piece thin-walled plastic substrate including a plurality of nonimaging troughs with certain metallized surfaces of the substrate serving as reflective side walls for each trough. The one-piece plastic substrate is provided with a seating surface at the bottom of each trough which conforms to the shape of an energy receiver to be seated therein.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Schuett, K.J.; Pawlak, J.P.; Traina, L.
No. 13 Blast Furnace at US Steel`s Gary Works is a 35 tuyere furnace with a 36.5 ft. hearth capable of producing over 9,000 tons of hot metal per day. The current casthouse design was placed in service following the second reline in the fall of 1979. This design anticipated daily production rates averaging 7,500 tons of hot metal per day and provided for removable troughs at two of the three tapholes. At the time, the troughs were rammed with a high alumina/silicon carbide granular ramming material that provided the operators with trough campaign lives between 60,000--70,000 tons of hotmore » metal produced. As refractory technology progressed, low cement/low moisture castables were introduced to the trough systems on No. 13 Blast Furnace. The immediate success of the castables was tempered by emergence of a new unexpected problem. That problem was the thermal expansion of the castable. The paper describes the problems that resulted in the need to modify the trough design, the new design of the trough, and its improvement in iron trough campaign life and reliability.« less
Designing Better Water Troughs: Does Trough Color Influence Dairy Cows' Preference?
Lemos Teixeira, Dayane; Hötzel, Maria José; Pinheiro Machado Filho, Luiz Carlos; Cazale, José Daniel; Enríquez-Hidalgo, Daniel
2017-01-01
Eighteen lactating dairy cows were used to elucidate their preference for green, grey, or red troughs. The herd was managed under a rotational grazing system with ad-libitum access to water until 11:30 h. For 9 days, all cows were tested individually following the afternoon milking. Cows drank similar quantities, spent a similar amount of time drinking, and took a similar number of sips from the 3 trough colors (p > .05). In 75% of the tests, cows drank more than 95% of the test period from the same trough. Within this time, the percentage of choices did not differ among colors (33.3% green, 39.0% grey, and 27.7% red). When they chose the red trough, cows spent less time drinking (p ≤ .05) and tended to take fewer sips (p = .07), which could suggest a partial aversion to this color. Suboptimal water trough design may have long-term negative effects on both the production and welfare of dairy cattle; however, the results suggest that color does not play a major role in the drinking behavior of dairy cows.
New sidescan sonar and gravity evidence that the Nova-Canton Trough is a fracture zone
NASA Astrophysics Data System (ADS)
Joseph, Devorah; Taylor, Brian; Shor, Alexander N.
1992-05-01
A 1990 sidescan sonar survey in the eastern region of the Nova-Canton Trough mapped 138°-striking abyssal-hill fabric trending into 70°-striking trough structures. The location and angle of intersection of the abyssal hills with the eastern Nova-Canton Trough effectively disprove a spreading-center origin of this feature. Free-air gravity anomalies derived from satellite altimetry data show continuity, across the Line Islands, of the Nova-Canton Trough with the Clipperton Fracture Zone. The Canton-Clipperton trend is copolar, about a pole at 30°S, 152°W, with other coeval Pacific-Farallon fracture-zone segments, from the Pau to Marquesas fracture zones. This copolarity leads us to postulate a Pacific-Farallon spreading pattern for the magnetic quiet zone region north and east of the Manihiki Plateau, with the Nova-Canton Trough originating as a transform fault in this system.
Topography of Valles Marineris: Implications for erosional and structural history
NASA Technical Reports Server (NTRS)
Lucchitta, B. K.; Isbell, N. K.; Howington-Kraus, A.
1994-01-01
Compilation of a simplified geologic/geomorphic map onto digital terrain models of the Valles Marineris permitted an evaluation of elevations in the vicinity of the troughs and the calculation of depth of troughs below surrounding plateaus, thickness of deposits inside the troughs, volumes of void spaces above geologic/geomorphic units, and volumes of deposits. The central troughs north Ophir, north and central Candor, and north Melas Chasmata lie as much as 11 km below the adjacent plateaus. In Ophir and Candor chasmata, interior layered deposits reach 8 km in elevation. If the deposits are lacustrine and if all troughs were interconnected, lake waters standing 8 km high would have spilled out of Coprates Chasma onto the surrounding plateaus having surface elevations of only 4-5 km. On the other hand, the troughs may not have been interconnected at the time of interior-deposit emplacement; they may have formed isolated ancestral basins. The existence of such basins is supported by independent structural and stratigraphic evidence. The ancestral basins may have eventually merged, perhaps through renewed faulting, to form northern subsidiary troughs in Ophir and Candor Chasmata and the Coprates/north Melas/Ius graben system. The peripheral troughs are only 2-5 km deep, shallower than the central troughs. Chaotic terrain is seen in the peripheral troughs near a common contour level of about 4 km on the adjacent plateaus, which supports the idea of release of water under artesian pressure from confined aquifers. The layered deposits in the peripheral troughs may have formed in isolated depressions that harbored lakes and predated the formation of the deep outflow channels. (If these layered deposits are of volcanic origin, they may have been emplaced beneath ice in the manner of table mountains.) Areal and volumetric computations show that erosion widened the troughs by about one-third and that deposits occupy one-sixth of the interior space. Even though the volume eroded is larger than the volume deposited, topographic and geologic considerations imply that material eroded from trough walls was probably part of the interior layered deposits but not their sole source. Additional material may have come from subterranean piping, from reworking of local disintegration products on the floors, such as chaotic materials, or from eolian influx. But overall it is likely that the additional material is volcanic and that it forms mostly the upper, more diversely bedded layers of the interior deposits.
NASA Technical Reports Server (NTRS)
1983-01-01
Standard descriptions for solar thermal power plants are established and uniform costing methodologies for nondevelopmental balance of plant (BOP) items are developed. The descriptions and methodologies developed are applicable to the major systems. These systems include the central receiver, parabolic dish, parabolic trough, hemispherical bowl, and solar pond. The standard plant is defined in terms of four categories comprising (1) solar energy collection, (2) power conversion, (3) energy storage, and (4) balance of plant. Each of these categories is described in terms of the type and function of components and/or subsystems within the category. A detailed description is given for the BOP category. BOP contains a number of nondevelopmental items that are common to all solar thermal systems. A standard methodology for determining the costs of these nondevelopmental BOP items is given. The methodology is presented in the form of cost equations involving cost factors such as unit costs. A set of baseline values for the normalized cost factors is also given.
The Skaergaard trough layering: sedimentation in a convecting magma chamber
NASA Astrophysics Data System (ADS)
Vukmanovic, Z.; Holness, M. B.; Monks, K.; Andersen, J. C. Ø.
2018-05-01
The upper parts of the floor cumulates of the Skaergaard Intrusion, East Greenland, contain abundant features known as troughs. The troughs are gently plunging synformal structures comprising stacks of crescentic modally graded layers with a sharply defined mafic base that grades upward into plagioclase-rich material. The origin of the troughs and layering is contentious, attributed variously to deposition of mineral grains by magmatic currents descending from the nearby walls, or to in situ development by localised recrystallisation during gravitationally-driven compaction. They are characterised by outcrop-scale features such as mineral lineations parallel to the trough axis, evidence of erosion and layer truncation associated with migration of the trough axis, and disruption of layering by syn-magmatic slumping. A detailed microstructural study of the modal trough layers, using electron backscatter diffraction together with geochemical mapping, demonstrates that these rocks do not record evidence for deformation by either dislocation creep or dissolution-reprecipitation. Instead, the troughs are characterised by the alignment of euhedral plagioclase crystals with unmodified primary igneous compositional zoning. We argue that the lineations and foliations are, therefore, a consequence of grain alignment during magmatic flow. Post-accumulation amplification of the modal layering occurred as a result of differential migration of an unmixed immiscible interstitial liquid, with upwards migration of the Si-rich conjugate into the plagioclase-rich upper part of the layers, whereas the Fe-rich immiscible conjugate remained in the mafic base. Both field and microstructure evidence support the origin of the troughs as the sites of repeated deposition from crystal-rich currents descending from the nearby chamber walls.
NASA Technical Reports Server (NTRS)
2006-01-01
9 June 2006 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a small portion of a dust-covered plain directly north of Labyrinthus Noctis which is cut by three linear troughs. The two long troughs running diagonally from the lower left (southwest) to the upper right (northeast) are connected by a third, shorter trough. Boulders derived from erosion of layered rock in the trough walls are seen perched on the sloping sidewalls and resting on the trough floors among giant windblown ripples. Location near: 0.2oN, 105.0oW Image width: 3 km (1.9 mi) Illumination from: upper left Season: Northern SpringBedrock morphology reveals drainage network in northeast Baffin Bay
NASA Astrophysics Data System (ADS)
Slabon, Patricia; Dorschel, Boris; Jokat, Wilfried; Freire, Francis
2018-02-01
A subglacial drainage network underneath the paleo-ice sheet off West Greenland is revealed by a new compilation of high-resolution bathymetry data from Melville Bay, northeast Baffin Bay. This drainage network is an indicator for ice streaming and subglacial meltwater flow toward the outer shelf. Repeated ice sheet advances and retreats across the crystalline basement together with subglacial meltwater drainage had their impact in eroding overdeepened troughs along ice stream pathways. These overdeepenings indicate the location of a former ice sheet margin. The troughs inherit characteristics of glacial and subglacial meltwater erosion. Most of the troughs follow tectonic weakness zones such as faults and fractures in the crystalline bedrock. Many of these tectonic features correspond with the orientations of major fault axes in the Baffin Bay region. The troughs extend from the present (sub) glacial fjord systems at the Greenland coast and parallel modern outlet-glacier pathways. The fast flowing paleo-ice streams were likely accelerated from the meltwater flow as indicated by glacial landforms within and along the troughs. The ice streams flowed along narrow tributary troughs and merged to form large paleo-ice streams bedded in the major cross-shelf troughs of Melville Bay. Apart from the troughs, a rough seabed topography characterises the bedrock, and we see a sharp geomorphic transition where ice flowed onto sedimentary rock and deposits.
Air-borne shape measurement of parabolic trough collector fields
NASA Astrophysics Data System (ADS)
Prahl, Christoph; Röger, Marc; Hilgert, Christoph
2017-06-01
The optical and thermal efficiency of parabolic trough collector solar fields is dependent on the performance and assembly accuracy of its components such as the concentrator and absorber. For the purpose of optical inspection/approval, yield analysis, localization of low performing areas, and optimization of the solar field, it is essential to create a complete view of the optical properties of the field. Existing optical measurement tools are based on ground based cameras, facing restriction concerning speed, volume and automation. QFly is an airborne qualification system which provides holistic and accurate information on geometrical, optical, and thermal properties of the entire solar field. It consists of an unmanned aerial vehicle, cameras and related software for flight path planning, data acquisition and evaluation. This article presents recent advances of the QFly measurement system and proposes a methodology on holistic qualification of the complete solar field with minimum impact on plant operation.
Schenk, A.; Porter, A. L.; Alenciks, E.; Frazier, K.; Best, A. A.; Fraley, S. M.; Fraley, G. S.
2016-01-01
Controversy has developed as to whether or not pin-metered water lines or water troughs are more appropriate for Pekin ducks. We hypothesized that water troughs would show improved duck body conditions and environmental quality compared to pin-metered water lines. To test this hypothesis, we housed ducks in 2 barns, one with water lines and one with water troughs. Water troughs were constructed to meet RSPCA guidelines for number and density of ducks and with recently described verandas. Ducks were divided into 4 pens per barn (n = 1,000 ducks/pen). The study was then repeated (n = 8 pens per water source) in a cross-over design so the barns each contained the opposite water source to the first experiment. We scored the ducks’ body condition using an established scoring rubric and analyzed using SAS Proc GLM-Mix as binomial data. Ducks housed with water troughs showed higher (thus worse condition; P < 0.001) scores for eyes, nostrils, feather quality, feather cleanliness, and foot pads. We also compared water condition, water quality, and duck mortality using a Student t test for both water sources each week. We found that the water troughs showed higher iron (P < 0.001), nitrites (P < 0.001), pH (P < 0.01), and bacterial growth (P < 0.001). The bacterial growth was shown to have higher (P < 0.001) E. coli, coliforms, and Staphylococcus in the water troughs. Water lines typically showed no bacterial growth in culture-based assays. Ducks housed with water troughs used greater (P = 0.001) volumes of water compared to ducks housed with water lines. Ducks with water troughs also showed a greater percent (P = 0.008) mortality at all ages compared to ducks with water lines. These data suggest that water troughs may not be beneficial for duck welfare and could adversely impact both environment and duck or human health. PMID:26769272
Schenk, A; Porter, A L; Alenciks, E; Frazier, K; Best, A A; Fraley, S M; Fraley, G S
2016-04-01
Controversy has developed as to whether or not pin-metered water lines or water troughs are more appropriate for Pekin ducks. We hypothesized that water troughs would show improved duck body conditions and environmental quality compared to pin-metered water lines. To test this hypothesis, we housed ducks in 2 barns, one with water lines and one with water troughs. Water troughs were constructed to meet RSPCA guidelines for number and density of ducks and with recently described verandas. Ducks were divided into 4 pens per barn (n=1,000 ducks/pen). The study was then repeated (n=8 pens per water source) in a cross-over design so the barns each contained the opposite water source to the first experiment. We scored the ducks' body condition using an established scoring rubric and analyzed using SAS Proc GLM-Mix as binomial data. Ducks housed with water troughs showed higher (thus worse condition; P<0.001) scores for eyes, nostrils, feather quality, feather cleanliness, and foot pads. We also compared water condition, water quality, and duck mortality using a Student t test for both water sources each week. We found that the water troughs showed higher iron (P<0.001), nitrites (P<0.001), pH (P<0.01), and bacterial growth (P<0.001). The bacterial growth was shown to have higher (P<0.001)E. coli, coliforms, and Staphylococcusin the water troughs. Water lines typically showed no bacterial growth in culture-based assays. Ducks housed with water troughs used greater (P=0.001) volumes of water compared to ducks housed with water lines. Ducks with water troughs also showed a greater percent (P=0.008) mortality at all ages compared to ducks with water lines. These data suggest that water troughs may not be beneficial for duck welfare and could adversely impact both environment and duck or human health. © The Author 2016. Published by Oxford University Press on behalf of Poultry Science Association.
Model based verification of the Secure Socket Layer (SSL) Protocol for NASA systems
NASA Technical Reports Server (NTRS)
Powell, John D.; Gilliam, David
2004-01-01
The National Aeronautics and Space Administration (NASA) has tens of thousands of networked computer systems and applications. Software Security vulnerabilities present risks such as lost or corrupted data, information theft, and unavailability of critical systems. These risks represent potentially enormous costs to NASA. The NASA Code Q research initiative 'Reducing Software Security Risk (RSSR) Trough an Integrated Approach' offers formal verification of information technology (IT), through the creation of a Software Security Assessment Instrument (SSAI), to address software security risks.
Structural features related to the volcanic gases in Southern Okinawa Trough
NASA Astrophysics Data System (ADS)
Wang, H. F.; Hsu, S. K.; Tsia, C. H.; Chen, S. C.; Wu, M. F.
2016-12-01
The Okinawa Trough is a rifted back-arc basin, heavily sedimented and formed in an intracontinental rift zone behind the Ryukyu trench-arc system. The Southern Okinawa Trough (SOT) east of Taiwan is the place where post-collisional extension happened. The collision moved southwestward and the Ryukyu trench-arc extension westward, Arc volcanism is dominant in the Northern Ryukyu volcanic arc and back-arc volcanism in the Southern Okinawa Trough. Marine geophysical data including side-scan sonar (SSS), sub-bottom profiler (SBP) and echo sounder system (EK60) data are used in this study. Active fluid activities out of seafloor are obvious from various images observed on these data, such as gas plumes. These hydrothermal vents have been located at a water depth of 1400 m. Our preliminary results show that gas seepage structures appear in the location where is a week zone, such as a normal fault in the slope. The hydrothermal activity within the Okinawa Trough is associated with volcanism located in rift zones in the Southern Okinawa Trough. However, the origin of the submarine hydrothermal fluids within the Okinawa Trough is diverse with contributions from volcanic, sedimentary and magmatic sources, needed further investigations.
A V-band wafer probe using ridge-trough waveguide
NASA Astrophysics Data System (ADS)
Godshalk, Edward M.
1991-12-01
A V-band (50-75 GHz) wafer probe is presented. The probe features a type of waveguide developed to allow transition from rectangular waveguide to coplanar waveguide. The waveguide consists of a ridge extending from the upper waveguide wall into a trough in the lower waveguide wall, and is known as the ridge-trough waveguide. A mathematical model is presented that allows important properties of the ridge-trough waveguide, such as the cutoff frequency and characteristic impedance, to be calculated.
Geophysical basin structure of the Cotonou (Dahomey/Benin) basin, West African Gulf of Guinea
DOE Office of Scientific and Technical Information (OSTI.GOV)
Babalola, O.O.
1990-05-01
The frontier Cotonou basin (or Dahomey/Benin embayment), situated west of the prolific Niger Delta basin, appears from seismic, gravity, and aeromagnetic interpretation, as a series of grabens and troughs confined on the west and east by the Romanche and the Chain fracture zones, respectively. The Keta trough of the western basin rim was formed by a 2700-m southeasterly downthrow of the Adina fault. This trough is separated by a north-northeasterly fault from the Lome-Anecho gravity high. Eastward, the arcuate Allada-Adjohon trough is abutted on its southern flank by the northwest-trending Nokue-Afowo trough and separated from the northwesterly Ikorodu trough bymore » the 50-km-wide aeromagnetically inferred ro-Otta ridge. The Ikorodu trough is adjoined on the northwest by the Aiyetoro trough and on the southeast by the Yemoja offshore graben trending east northeast as the Seme oil-field structural trend. North of the regional northeasterly axial, gravity positive, structural divide (the continental precursor of the Charcot fracture zone) a series of half-grabens (notably the Aplahoue, Bohicon, and Keiou troughs), normal faulted eastward and downthrown in the west, dominate the landward western rim of the Cotonou basin. Graben-bounding faults control the upper valleys of the basin drainage, converge toward the regional intrabasin structural trend and continue into the Fenyi-koe fault and the Charcot fracture zone. These faults resulted from brittle dextral shear of continental crust oblique to local, preexisting north-northeast structural trends. In the eastern basin rim, preexisting north-northwest structural trends influenced the shearing stress regime to generate small, shallow, structurally bounded, east-northeast- and north-northwest trending grabens.« less
NASA Technical Reports Server (NTRS)
Carlson, J. M.; Chayes, J. T.; Swindle, G. H.; Grannan, E. R.
1990-01-01
The scaling behavior of sandpile models is investigated analytically. First, it is shown that sandpile models contain a set of domain walls, referred to as troughs, which bound regions that can experience avalanches. It is further shown that the dynamics of the troughs is governed by a simple set of rules involving birth, death, and coalescence events. A simple trough model is then introduced, and it is proved that the model has a phase transition with the density of the troughs as an order parameter and that, in the thermodynamic limit, the trough density goes to zero at the transition point. Finally, it is shown that the observed scaling behavior is a consequence of finite-size effects.
Kumar, Vinod; Afrin, Samia; Ortega, Jesus; ...
2013-09-01
A prototype of a concentrating solar collector (CSC) receiver was designed, built, and evaluated on-sun at the University of Texas at El Paso in El Paso, TX. This prototype receiver consists of two parabolic trough-reflectors but, in principle, the design can be efficiently extended to multiple units for achieving a higher temperature throughput. Each reflector has a vacuum tube collector at the focal point of the trough. The solar collector system was combined with a single-tank thermocline thermal energy storage (TES) for off-solar thermal usage. The main goal of this study is to develop an advanced solar hot water systemmore » for most residential applications. The focus of this study is to investigate the feasibility and performance of the solar thermal system by employing the recent advancement in the TES—a thermocline based TES—system for the concentrating solar power technologies developed by the Sandia National Laboratories and National Renewable Energy Laboratories for electricity production. A CSC when combined with TES has potential to provide uninterrupted thermal energy for most residential usages. This paper presents a detailed description of prototype design and materials required. The thermal energy storage tank utilizes an insulated 170 l (45 gal) galvanized steel tank. In order to maintain thermocline in the TES tank, with hot water on top and cold water at the bottom, two plate distributors are installed in the tank. The data showed a significant enhancement in thermal energy generation. This thermocline based single tank presented a thermal energy storage potential for at least three days (with diminishing storage capacity) that test were performed. The whole prototype was made for approximately USD 355 (excludes any labor costs) and hence also has strong potential for supplying clean thermal energy in most developing countries. As a result, tests of the prototype were conducted in November 2011.« less
Agastin, A; Sauvant, D; Naves, M; Boval, M
2014-03-01
Quantitative meta-analysis was run on 108 publications featuring 116 experiments and 399 treatments dealing with the effect of trough or pasture feeding environment (FE) on ruminant performances. The objective was to compare the effect of trough or pasture FE on ADG, diet OM digestibility (OMD), various carcass characteristics, and the interaction between FE and complementation modalities. Live weight was adjusted to compare results between species. Results showed that trough-fed animals had higher ADG (+17.89%; P < 0.001), hot carcass yield (HYield; + 2.47%; P < 0.001) and carcass fat content (+ 24.87%; P < 0.001) than pasture-fed animals but lower carcass muscle and bone percentages (-1.60% [P = 0.010] and -7.63% [P = 0.003], respectively). Feeding environment had no effect on diet OMD (P = 0.818), but the number of observations was low. After considering the addition or not of concentrate in the diet (addiCO), FE effect persisted on ADG (P = 0.024) and carcass fat content (P = 0.027) but not on HYield (P = 0.078) or muscle and bone percentages (P = 0.119 and P = 0.581, respectively). After considering the nature of the concentrate (natCO), FE effect persisted on ADG (P < 0.001) and HYield (P = 0.004). Considering the percentage of concentrate in the diet (PCO) erased FE effect on ADG (P = 0.891) and HYield (P = 0.128). In contrast, considering the quantity of concentrate(QCO) erased FE effect on ADG (P = 0.084) but not on HYield (P = 0.006) or on carcass fat and muscle contents (P = 0.040 and P = 0.040, respectively) although the FE effect on carcass bone content persisted (P = 0.550). Animal species and physiological stage had no effect on any of the variables studied (P > 0.05) but experiment did (P ≤ 0.001). The increase in ADG was positively correlated to HYield in cattle (P = 0.002) and small ruminants (P = 0.003) and positively linked to carcass fat content (P = 0.007) but not carcass muscle content, which actually decreased (P = 0.001). Overall, this meta-analysis confirmed previous reports of FE effects and revealed how the differences generally reported result from a confounding effect of FE and nature of the diet. Indeed, in most of the studies used, trough-fed animals were supplemented with concentrate whereas pasture-fed animals were not. This research also highlighted the fact that pasture-fed animals have the potential to achieve the same performances as trough-fed animals when fed a similar diet.
NASA Astrophysics Data System (ADS)
Yang, Qing; Houze, Robert A.; Leung, L. Ruby; Feng, Zhe
2017-12-01
Continental-scale convection-permitting simulations of the warm seasons of 2011 and 2012 using the Weather Research and Forecasting model reproduce realistic structure and frequency distribution of lifetime and event mean precipitation of mesoscale convective systems (MCSs) over the central United States. Analysis is performed to determine the environmental conditions conducive to generating long-lived MCSs. The simulations show that MCSs systematically form over the central Great Plains ahead of a trough in the westerlies in combination with an enhanced low-level moist jet from the Gulf of Mexico. These environmental properties at the time of storm initiation are most prominent for the MCSs that persist for the longest times. MCSs reaching lifetimes of 9 h or more occur closer to the approaching trough than shorter-lived MCSs. These long-lived MCSs exhibit the strongest feedback to the environment through diabatic heating in the trailing regions of the MCSs. The feedback strengthens the synoptic-scale trough associated with the MCS by producing an anomaly circulation characterized by a divergent perturbation at high levels over the MCS and a midlevel cyclonic circulation perturbation near the trough line in association with the trailing portion of the MCS. The quasi-balanced mesoscale vortex may help to maintain the MCS over a long period of time by feeding dry, cool air into the environment at the rear of the MCS region that enhances evaporative cooling and helps maintain the MCS.
The impact of the structural features of the rock mass on seismicity in Polish coal mines
NASA Astrophysics Data System (ADS)
Patyńska, Renata
2017-11-01
The article presents seismic activity induced in the coal mines of the Upper Silesian Coal Basin (GZW) in relation to the locations of the occurrence of rockbursts. The comparison of these measurements with the structural features of the rock mass of coal mines indicates the possibility of estimating the so-called Unitary Energy Expenditure (UEE) in a specific time. The obtained values of UEE were compared with the distribution of seismic activity in GZW mines. The level of seismic activity in the analysed period changed and depended on the intensity of mining works and diverse mining and geological conditions. Five regions, where tremors occurred (Bytom Trough, Main Saddle, Main Trough, Kazimierz Trough, and Jejkowice and Chwałowice Trough) which belong to various structural units of the Upper Silesia were analyzed. It was found out that rock bursts were recorded only in three regions: Main Saddle, Bytom Trough, and Jejkowice and Chwałowice Trough.
Stress Fields Along Okinawa Trough and Ryukyu Arc Inferred From Regional Broadband Moment Tensors
NASA Astrophysics Data System (ADS)
Kubo, A.; Fukuyama, E.
2001-12-01
Most shallow earthquakes along Okinawa trough and Ryukyu arc are relatively small (M<5.5). Focal mechanism estimations for such events were difficult due to insufficient dataset. However, this situation is improved by regional broadband network (FREESIA). Lower limit of magnitude of the earthquakes determined becomes 1.5 smaller in M{}w than that of Harvard moment tensors. As a result, we could examine the stress field in more detail than Fournier et al.(2001, JGR, 106, 13751-) did based on surface geology and teleseismic moment tensors. In the NE Okinawa trough, extension axes are oblique to the trough strike, while in SW Okinawa trough, they are perpendicular to the trough. Fault type in SW is normal fault and gradually changes to mixture of normal and strike slip toward NE. In the Ryukyu arc, extension axes are parallel to the arc. Although this feature is not clear in the NW Ryukyu arc, arc parallel extension may be a major property of entire arc. Dominant fault type is normal fault and several strike slips with the same extensional component are included. The volcanic train is located at the edge of arc parallel extension field faced A simple explanation of the arc parallel extension is the response to the opening motion of the Okinawa trough. Another possible mechanism is forearc movement due to oblique subduction which is enhanced in SW. We consider that the Okinawa trough and the Ryukyu arc are independent stress provinces.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mendelsohn, M.; Lowder, T.; Canavan, B.
Over the last several years, solar energy technologies have been, or are in the process of being, deployed at unprecedented levels. A critical recent development, resulting from the massive scale of projects in progress or recently completed, is having the power sold directly to electric utilities. Such 'utility-scale' systems offer the opportunity to deploy solar technologies far faster than the traditional 'behind-the-meter' projects designed to offset retail load. Moreover, these systems have employed significant economies of scale during construction and operation, attracting financial capital, which in turn can reduce the delivered cost of power. This report is a summary ofmore » the current U.S. utility-scale solar state-of-the-market and development pipeline. Utility-scale solar energy systems are generally categorized as one of two basic designs: concentrating solar power (CSP) and photovoltaic (PV). CSP systems can be further delineated into four commercially available technologies: parabolic trough, central receiver (CR), parabolic dish, and linear Fresnel reflector. CSP systems can also be categorized as hybrid, which combine a solar-based system (generally parabolic trough, CR, or linear Fresnel) and a fossil fuel energy system to produce electric power or steam.« less
Trough Coating Solar Cells Without Spillover
NASA Technical Reports Server (NTRS)
Heaps, J. D.
1986-01-01
Problem with trough coating of silicon on ceramic - spillover of molten silicon - overcome by combination of redesigned heaters and tiltable trough. Modifications make it possible to coat virtually any length of ceramic with film of solar-cell-grade silicon. Previously, maximum length coated before spillover occurred was 2 inches (5.1 cm).
NASA Technical Reports Server (NTRS)
2006-01-01
2 July 2006 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a portion of a trough cutting across a dust-covered plain in the Labeatis Fossae region of Mars. Boulders derived from the layered exposures near the top of the trough walls are resting on the floor, and in some locations, the sloping sidewalls of the dusty trough. Location near: 22.1oN, 94.5oW Image width: 3 km (1.9 mi) Illumination from: lower left Season: Northern SpringPennsylvanian-Permian tectonism in the Great Basin: The Dry Mountain trough and related basins
DOE Office of Scientific and Technical Information (OSTI.GOV)
Snyder, W.S.; Spinosa, C.; Gallegos, D.M.
1991-02-01
Pennsylvanian-Permian tectonism affected the continental margin of western North America from the Yukon to the Mojave Desert. Specific signatures of this tectonism include local angular unconformities, regional disconformities, renewed outpouring of clastic debris from a reactivated Antler and related highlands, and development of deeper water basins with anoxic sediments deposited below wave base. The basins formed include Ishbel trough (Canada), the Wood River basin (Idaho), Cassia basin, Ferguson trough, Dry Mountain trough (all Nevada), and unnamed basins in Death Valley-Mojave Desert region. The Dry Mountain trough (DMT) was initiated during early Wolfcampian and received up to 1,200 m of sedimentmore » by the late Leonardian. The lower contact is a regional unconformity with the Ely Limestone, or locally with the Diamond Peak or Vinini formations. Thus, following a period of localized regional uplift that destroyed the Ely basin, portions of the uplifted and exposed shelf subsided creating the Dry Mountain trough. Evidence suggesting a tectonic origin for the DMT includes (1) high subsidence rates (60-140 m/m.y.); (2) renewed influx of coarse clastic debris from the Antler highlands: (3) possible pre-Early Permian folding, thrusting, and tilting within the highlands; and (4) differential subsidence within the Dry Mountain trough, suggesting the existence of independent fault blocks.« less
Present-day erosion of Martian polar terrain by the seasonal CO2 jets
NASA Astrophysics Data System (ADS)
Portyankina, Ganna; Hansen, Candice J.; Aye, Klaus-Michael
2017-01-01
Here we report on the detection of new dendritic troughs created by the seasonal CO2 jet activity over several Martian years. According to Kieffers hypothesis (Kieffer, 2007) in Martian polar areas seasonal CO2 ice sublimation creates gas jets that deposit fans of mineral dust and sand on top of the CO2 ice. These jets and the related sub-ice gas flows are believed to carve troughs in the underlying polar deposits which, after multiple repetitions of this process throughout Martian spring seasons, create araneiform terrains. The High Resolution Imaging Science Experiment (HiRISE) on the Mars Reconnaissance Orbiter (MRO) detected the new troughs during its campaign for seasonal monitoring of the polar areas. The newly detected dendritic troughs are small shallow branching troughs (≈ 1.4 m wide) similar to the seasonal furrows previously detected in the northern hemisphere (Bourke, 2013). The essential difference between the new troughs and furrows lies in the fact that the troughs in the south are persistent while the northern furrows are erased each Martian year by the sand movement due to summer winds. From year to year the new southern troughs extend and develop new tributaries and their overall geometry turns from linear to dendritic, a characteristic shared with araneiform terrains. We believe that furrows have the same origin as the southern dendritic troughs but do not develop into dendritic shapes because of the high mobility of the dune material into which they are carved. Several locations where new dendritic troughs are observed lie in the vicinity of dunes. This gives us an observational indication that presence of erosive sand material is an important factor in creating (or at least starting) erosive processes that lead to the formation of dendritic troughs. By extrapolation the same mechanism should be acting to create the much larger araneiform terrains. Detection of the present day erosion working in polar areas and creating new topographical features is important for understanding of the processes that shape polar areas. Several years of HiRISE observations provide us with the information about the current rate of erosion and hence help estimate minimum ages of the araneiforms and the surface into which they are carved to be 1.3 × 103 Martian years.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Li Junfeng; Zhu Li; Liu Zhan
1998-07-01
At the request of US sponsors Spencer Management Associates (SMA) and Sun{diamond}Lab, China`s Center for Renewable Energy Development and former Ministry of Electric Power conducted an initial appraisal of the issues involved with developing China`s first solar thermal electric power plant in the sunbelt regions of Tibet or Xinjiang provinces. The appraisal concerns development of a large-scale, grid-connected solar trough or tower project capable of producing 30 or more megawatts of electricity. Several of the findings suggest that Tibet could be a niche market for solar thermal power because a solar plant may be the low-cost option relative to othermore » methods of generating electricity. China has studied the concept of a solar thermal power plant for quite some time. In 1992, it completed a pre-feasibility study for a SEGS-type parabolic trough plant with the aid of Israel`s United Development Limited. Because the findings were positive, both parties agreed to conduct a full-scale feasibility study. However, due to funding constraints, the study was postponed. Most recently, Sun{diamond}Lab and SMA asked China to broaden the analysis to include tower as well as trough concepts. The findings of this most recent investigation completed i November of 1997, are the subject of this paper. The main conclusions of all studies conducted to date suggest that a region in the proximity of Lhasa, Tibet, offers the best near-term opportunity within China. The opportunities for solar thermal power plants in other regions of China were also investigated.« less
NASA Astrophysics Data System (ADS)
Parker, James; Pryse, Eleri; Jackson-Booth, Natasha
2017-04-01
The main ionospheric trough is a large-scale spatial depletion in the ionospheric electron density that commonly separates the auroral and mid-latitude regions. The feature covers several degrees in latitude and is extended in longitude. It exhibits substantial day-to-day variability in both the location of its minimum ionisation density and in its latitudinal structure. Observations from the UK have shown the trough to be a night-time feature, appearing in early evening to the north of the mainland and progressing equatorward during the course of the night. At dawn, photoionisation fills in the feature. Under increasing levels of geomagnetic activity, the trough moves progressively to lower latitudes. Steep gradients on the trough walls and their variability can cause problems for radio applications. EDAM can be used to model the ionosphere at the trough latitudes by assimilating ionospheric observations from this region into the International Reference Ionosphere (IRI). In this study troughs modelled by EDAM, assimilating data for a period from September to December 2002, are presented and are verified by comparisons with independent observations. Measurements of slant total electron content (sTEC) between GPS satellites and forty ground receivers in Europe were assimilated into EDAM to model the ionospheric electron density. The Vertical Total Electron Content (VTEC) was then calculated through the model, with the values at the longitude of 0.0E considered to obtain statistical characteristics of identified troughs parameters. Comparisons of the parameters with those obtained previously, using transmissions from the satellites of NIMS (Navy Ionospheric Monitoring System) orbiting at altitudes lower than GPS, revealed consistent results. Further support for the EDAM trough was obtained by comparisons of the model with independent GPS measurements. For this a GPS ground station not used in the assimilation was used to observe the sTEC to this "truth" station. Comparisons of these independent truth data with sTEC calculated through the model were used to determine the accuracy of EDAM in the vicinity of the trough.
Fenton, L.K.; Herkenhoff, K. E.
2000-01-01
We present two photoclinometric profiles across a trough in the martian northern polar layered terrain. Complications caused by albedo variations were avoided by using an early springtime Viking image with a thin cover of seasonal CO2 frost. The topographic profiles were constrained with stereogrammetric elevations derived from summertime Viking images of the same region. We find that the photoclinometric profiles are consistent with a nearby MOLA (Mars Orbiter Laser Altimeter) track crossing the same polar trough. The trough is asymmetric, with higher relief and a steeper slope on the equatorward-facing wall. Individual layers are subdued and difficult to observe in the profiles. A decrease in both relief and elevation toward the eastern end of the trough suggests that layers become thinner to the east. Declining equatorward slopes in the eastern portion of the trough imply that erosion rates have varied along the trough. The variation in erosion rate may be linked to the change in layer thickness along the trough. Layers have an average thickness of 19??8 m in the center of the trough and 59??32 m on the northern wall. The northern wall is most likely composed of thinner layers that are obscured. To first order, we find that a 19-m layer requires 16,000 years of deposition to form. Although this timescale does not coincide with orbital variation periods of 105 and 106 years, deposition rates may not be constant and thus the 16,000-year layer formation time does not preclude layer formation during part of each orbital oscillation. ?? 2000 Academic Press.
Meta-analysis of medical intervention for normal tension glaucoma.
Cheng, Jin-Wei; Cai, Ji-Ping; Wei, Rui-Li
2009-07-01
To evaluate the intraocular pressure (IOP) reduction achieved by the most frequently prescribed antiglaucoma drugs in patients with normal tension glaucoma (NTG). Systematic review and meta-analysis. Fifteen randomized clinical trials reported 25 arms for peak IOP reduction, 16 arms for trough IOP reduction, and 13 arms for diurnal curve IOP reduction. Pertinent publications were identified through systematic searches of PubMed, EMBASE, and the Cochrane Controlled Trials Register. The patients had to be diagnosed as having NTG. Methodological quality was assessed by the Delphi list on a scale from 0 to 18. The pooled 1-month IOP-lowering effects were calculated using the 2-step DerSimonian and Laird estimate method of the random effects model. Absolute and relative reductions in IOP from baseline for peak and trough moments. Quality scores of included studies were generally high, with a mean quality score of 12.7 (range, 9-16). Relative IOP reductions were peak, 15% (12%-18%), and trough, 18% (8%-27%) for timolol; peak, 14% (8%-19%), and trough, 12% (-7% to 31%) for dorzolamide; peak, 24% (17%-31%), and trough, 11% (7%-14%) for brimonidine; peak, 20% (17%-24%), and trough, 20% (18%-23%) for latanoprost; peak, 21% (16%-25%), and trough, 18% (14%-22%) for bimatoprost. The differences in absolute IOP reductions between prostaglandin analogues and timolol varied from 0.9 to 1.0 mmHg at peak and -0.1 to 0.2 mmHg at trough. Latanoprost, bimatoprost, and timolol are the most effective IOP-lowering agents in patients with NTG.
Modeling of solar polygeneration plant
NASA Astrophysics Data System (ADS)
Leiva, Roberto; Escobar, Rodrigo; Cardemil, José
2017-06-01
In this work, a exergoeconomic analysis of the joint production of electricity, fresh water, cooling and process heat for a simulated concentrated solar power (CSP) based on parabolic trough collector (PTC) with thermal energy storage (TES) and backup energy system (BS), a multi-effect distillation (MED) module, a refrigeration absorption module, and process heat module is carried out. Polygeneration plant is simulated in northern Chile in Crucero with a yearly total DNI of 3,389 kWh/m2/year. The methodology includes designing and modeling a polygeneration plant and applying exergoeconomic evaluations and calculating levelized cost. Solar polygeneration plant is simulated hourly, in a typical meteorological year, for different solar multiple and hour of storage. This study reveals that the total exergy cost rate of products (sum of exergy cost rate of electricity, water, cooling and heat process) is an alternative method to optimize a solar polygeneration plant.
Code of Federal Regulations, 2010 CFR
2010-01-01
..., troughs, and other equipment used for infected poultry. 82.21 Section 82.21 Animals and Animal Products... ANIMALS (INCLUDING POULTRY) AND ANIMAL PRODUCTS EXOTIC NEWCASTLE DIS- EASE (END) AND CHLAMYDIOSIS Chlamydiosis in Poultry § 82.21 Vehicles, cages, coops, containers, troughs, and other equipment used for...
Evolution of the Outflows in NGC 3516
NASA Astrophysics Data System (ADS)
Dunn, Jay P.; Parvaresh, Rozhin; Kraemer, S. B.; Crenshaw, D. Michael
2018-02-01
We analyze the 2011 HST/COS spectrum of the Seyfert 1 galaxy NGC 3516, which demonstrates clear changes in one of the intrinsic absorption troughs (component 5), slight evidence of change in a second trough (component 6), and the appearance of a new absorption trough (component 9). We interpret both the changes and the appearance of the new trough as bulk motion across the line of sight. The implied lower limit on the transverse velocity of component 5 is 360 km s‑1, compared to the earlier 2001 HST/STIS spectrum, while the lower limits for components 6 and 9 are 920 km s‑1, based on 2009 FUSE data. Component 5 also exhibits a shift in velocity centroid. This is only the second known case of this behavior in a Seyfert galaxy. Due to the high quality of the HST/COS spectrum, we identify a previously undetected trough due to an excited state of Si II for component 1. In combination with the resonance trough of Si II and photoionization modeling, we directly determine the distance of the component 1 outflow to be 67.2 pc.
Amin, Raid W; Guttmann, Rodney P; Harris, Quianna R; Thomas, Janesha W
2018-05-01
Vancomycin is a key antibiotic used in the treatment of multiple conditions including infections associated with cystic fibrosis and methicillin-resistant Staphylococcus aureus. The present study sought to develop a model based on empirical evidence of optimal vancomycin dose as judged by clinical observations that could accelerate the achievement of desired trough level in children with cystic fibrosis. Transformations of dose and trough were used to arrive at regression models with excellent fit for dose based on weight or age for a target trough. Results of this study indicate that the 2 proposed regression models are robust to changes in age or weight, suggesting that the daily dose on a per-kilogram basis is determined primarily by the desired trough level. The results show that to obtain a vancomycin trough level of 20 μg/mL, a dose of 80 mg/kg/day is needed. This analysis should improve the efficiency of vancomycin usage by reducing the number of titration steps, resulting in improved patient outcome and experience. © 2018, The American College of Clinical Pharmacology.
NASA Astrophysics Data System (ADS)
Guo, Kun; Zhai, Shikui; Yu, Zenghui; Wang, Shujie; Zhang, Xia; Wang, Xiaoyuan
2018-04-01
The Okinawa Trough is an infant back-arc basin developed along the Ryukyu arc. This paper provides new major and trace element and Sr-Nd-Pb-Li isotope data of volcanic rocks in the Okinawa Trough and combines the published geochemical data to discuss the composition of magma source, the influence of subduction component, and the contamination of crustal materials, and calculate the contribution between subduction sediment and altered oceanic crust in the subduction component. The results showed that there are 97% DM and 3% EMI component in the mantle source in middle trough (MS), which have been influenced by subduction sediment. The Li-Nd isotopes indicate that the contribution of subduction sediment and altered oceanic crust in subduction component are 4 and 96%, respectively. The intermediate-acidic rocks suffer from contamination of continental crust material in shallow magma chamber during fractional crystallization. The acidic rocks in south trough have experienced more contamination of crustal material than those from the middle and north trough segments.
The noon and midnight mid-latitude trough as seen by Ariel 4
NASA Technical Reports Server (NTRS)
Tulunay, Y. K.; Grebowsky, J. M.
1978-01-01
The electron density data returned by the polar orbiting satellites Ariel 3 and Ariel 4 revealed that the midlatitude trough is one of the distinct large-scale features of the ionosphere at about 550 km. Recent work (e.g., Tulunay and Grebowsky, 1975) on the data included the investigation of the temporal development of the latitudinal position of the midlatitude electron density trough at dawn and dusk during the large magnetic storms of May 1967 and May 1972. Model calculations which assumed that the equatorial convection E-field varies in step with the Kp index reproduced on the average the observed behavior. In the present paper, trough observations made at noon and midnight during the period, 12-21 December 1971 which encompassed a relatively large magnetic storm are discussed. In this context, model calculations have been employed as a guide of average approximations of the actual situation in predicting the plasmapause location. It is also shown that the trough observed on the noon passes is not generally plasmapause-related as the nightside troughs are expected to be.
Interference of Locally Forced Internal Waves in Non-Uniform Stratifications
NASA Astrophysics Data System (ADS)
Supekar, Rohit; Peacock, Thomas
2017-11-01
Several studies have investigated the effect of constructive or destructive interference on the transmission of internal waves propagating through non-uniform stratifications. Such studies have been performed for internal waves that are spatiotemporally harmonic. To understand the effect of localization, we perform a theoretical and experimental study of the transmission of two-dimensional internal waves that are generated by a spatiotemporally localized boundary forcing. This is done by considering an idealized problem and applying a weakly viscous semi-analytic linear model. Parametric studies using this model show that localization leads to the disappearance of transmission peaks and troughs that would otherwise be present for a harmonic forcing. Laboratory experiments that we perform provide a clear indication of this physical effect. Based on the group velocity and angle of propagation of the internal waves, a practical criteria that assesses when the transmission peaks or troughs are evident, is obtained. It is found that there is a significant difference in the predicted energy transfer due to a harmonic and non-harmonic forcing which has direct implications to various physical forcings such as a storm over the ocean.
Progress on the Ram Wing Concept with Emphasis on Lateral Dynamics
DOT National Transportation Integrated Search
1971-01-01
Theoretical and experimental efforts conducted at the Transportation Systems Center in the ram wing program are described. Glide Tests were performed using a simple ram wing model operating in an open rectangular trough 50 ft long. Lift drag ratios o...
Ueshima, Satoshi; Hira, Daiki; Fujii, Ryo; Kimura, Yuuma; Tomitsuka, Chiho; Yamane, Takuya; Tabuchi, Yohei; Ozawa, Tomoya; Itoh, Hideki; Horie, Minoru; Terada, Tomohiro; Katsura, Toshiya
2017-09-01
During anticoagulant therapy, major bleeding is one of the most severe adverse effects. This study aimed to evaluate the relationships between ABCB1, ABCG2, and CYP3A5 polymorphisms and plasma trough concentrations of apixaban, a direct inhibitor of coagulation factor X. A total of 70 plasma concentrations of apixaban from 44 Japanese patients with atrial fibrillation were analyzed. In these analyses, the plasma trough concentration/dose (C/D) ratio of apixaban was used as a pharmacokinetic index and all data were stratified according to the presence of ABCB1 (ABCB1 1236C>T, 2677G>T/A, and 3435C>T), ABCG2 (ABCG2 421C>A), and CYP3A5 (CYP3A5*3) polymorphisms. Influences of various clinical laboratory parameters (age, serum creatinine, estimated glomerular filtration rate, aspartate amino transferase, and alanine amino transferase) on the plasma trough C/D ratio of apixaban were included in analyses. Although no ABCB1 polymorphisms affected the plasma trough C/D ratio of apixaban, the plasma trough C/D ratio of apixaban was significantly higher in patients with the ABCG2 421A/A genotype than in patients with the ABCG2 421C/C genotype (P<0.01). The plasma trough C/D ratio of apixaban in patients with CYP3A5*1/*3 or *3/*3 genotypes was also significantly higher than that in patients with the CYP3A5*1/*1 genotype (P<0.05). Furthermore, the plasma trough C/D ratio of apixaban decreased with increased estimated glomerular filtration rate. These results indicate that ABCG2 421A/A and CYP3A5*3 genotypes and renal function are considered potential factors affecting trough concentrations of apixaban.
Gangodagamage, Chandana; Wullschleger, Stan
2014-07-03
This dataset represent a map of the high center (HC) and low center (LC) polygon boundaries delineated from high resolution LiDAR data for the arctic coastal plain at Barrow, Alaska. The polygon troughs are considered as the surface expression of the ice-wedges. The troughs are in lower elevations than the interior polygon. The trough widths were initially identified from LiDAR data, and the boundary between two polygons assumed to be located along the lowest elevations on trough widths between them.
Target organ damage in primary hypertensive patients: role of the morning heart rate surge.
Zhan, Yuliang; Kang, Ting; Wei, Yunfeng
The morning heart rate surge (MHRS) and morning blood pressure surge (MBPS) may be responsible for the high prevalence of cardiovascular events during the morning period. The clinical significance of the MBPS has been well established, but that of the MHRS remains unclear. Thus, we evaluated the association between the MHRS and target organ damage (TOD). A cross-sectional study of 580 hypertensive patients was performed. MHRS and heart rate variability (HRV) were analyzed by 24 h electrocardiogram. TOD was assessed by estimated glomerular filtration rate, carotid intima-media thickness (IMT), and left ventricular mass index. The prevalence of TOD tended to decrease with sleep-trough MHRS (first to fourth quartiles: 71%, 70.3%, 58.6%, and 52.7%, respectively) or prewaking MHRS quartiles (first to fourth quartiles: 65.3%, 73.6%, 61.4%, and 54.2%, respectively), whereas the opposite trend was observed for standard deviation of all normal NN intervals (SDNN). Moreover, sleep-trough MHRS, prewaking MHRS, SDNN, and SDNN index were significantly lower in patients with TOD than in those without TOD. According to four logistic regression models, the associations of prewaking MHRS, SDNN, and SDNN index with TOD were lost after adjustment for age and BP. Patients in the first (≤11.125 bpm) and second sleep-trough MHRS quartiles (11.125-15.75 bpm) had a 1.95-2.06-fold increased risk of TOD compared with those in the fourth quartile (p < 0.05). A blunted sleep-trough MHRS, which may serve as a surrogate marker for autonomic imbalance, was independently associated with TOD in primary hypertensive patients.
Sedimentation and tectonics of the Sylhet trough, Bangladesh
Johnson, S.Y.; Nur Alam, A.M.
1991-01-01
The Sylhet trough, a sub-basin of the Bengal Basin in northeastern Bangladesh, contains a thick fill (12 to 16 km) of late Mesozoic and Cenozoic strata that record its tectonic evolution. Stratigraphic, sedimentologic, and petrographic data collected from outcrops, cores, well logs, and seismic lines are used to reconstruct the history of this trough. -from Authors
Numerical Optimization Using Desktop Computers
1980-09-11
concentrating compound parabolic trough solar collector . Thermophysical, geophysical, optical and economic analyses were used to compute a life-cycle...third computer program, NISCO, was developed to model a nonimaging concentrating compound parabolic trough solar collector using thermophysical...concentrating compound parabolic trough Solar Collector . C. OBJECTIVE The objective of this thesis was to develop a system of interactive programs for the Hewlett
Concentrating Solar Power Projects - Yumen 50MW Thermal Oil Trough CSP
project | Concentrating Solar Power | NREL Thermal Oil Trough CSP project Status Date : September 28, 2016 Project Overview Project Name: Yumen 50MW Thermal Oil Trough CSP project Country: China : Thermal Oil Power Block Turbine Capacity (Gross): 50.0 MW Turbine Capacity (Net): 50.0 MW Output Type
The Ordovician Sebree Trough: An oceanic passage to the Midcontinent United States
Kolata, Dennis R.; Huff, W.D.; Bergstrom, Stig M.
2001-01-01
The Sebree Trough is a relatively narrow, shale-filled sedimentary feature extending for several hundred kilometers across the Middle and Late Ordovician carbonate platform of the Midcontinent United States. The dark graptolitic shales within the trough stand in contrast to the coeval bryozoan-brachiopod-echinodermrich limestones on the flanking platforms. We infer from regional stratal patterns, thickness and facies trends, and temporal relations established by biostratigraphy and K-bentonite stratigraphy that the Sebree Trough initially began to develop during late Turinian to early Chatfieldian time (Mohawkian Series) as a linear bathymetric depression situated over the failed late Precambrian-Early Cambrian Reelfoot Rift. Rising sea level and positioning of a subtropical convergence zone along the southern margin of Laurentia caused the rift depression to descend into cool, oxygen-poor, phosphate-rich oceanic waters that entered the southern reaches of the rift from the Iapetus Ocean. The trough apparently formed in a system of epicontinental estuarine circulation marked by a density-stratified water column. Trough formation was accompanied by cessation of carbonate sedimentation, deposition of graptolitic shales, development of hardground omission surfaces, substrate erosion, and local phosphogenesis. The carbonate platforms on either side of the trough are dominated by bryozoan-brachiopod-echinoderm grainstones and packstones that were deposited in zones of mixing where cool, nutrient-rich waters encountered warmer shelf waters. Concurrently, lime mudstone and wackestone were deposited shoreward (northern Illinois, Wisconsin, Iowa, Minnesota, Michigan) in warmer, more tropical shallow seas. Coeval upward growth of the flanking carbonate platforms sustained and enhanced development of the trough shale facies. Five widespread diachronous late Mohawkian and Cincinnatian omission surfaces are present in the carbonate facies of the Midcontinent. These surfaces include sub-Deicke K-bentonite, DSI; top of Black River Limestone, DS2; base and top of the Guttenberg Limestone Member of the Decorah Formation, DS3 and DS4; and top of the Trenton Limestone, DS5. Some of the surfaces correspond to previously described depositional sequence boundaries. All five surfaces, which embody deepening phases on top of high-stand-systems tracts, converge in the Sebree Trough, indicating that the trough was a long-lived feature and was the source of eutrophic waters that episodically spread across the adjacent platforms, terminating carbonate production. Late Turinian and early Chatfieldian incipient drowning episodes were followed by a final drowning event that began in the Sebree Trough during the late Chatfieldian (Climacograptus spiniferus Zone) and reached southernmost Minnesota and other regions far within the platform interior by Richmondian time (Amorphognathus ordovicicus Zone).
Morphological evolution of Jinshan Trough in Hangzhou Bay (China) from 1960 to 2011
NASA Astrophysics Data System (ADS)
Liu, Yifei; Xia, Xiaoming; Chen, Shenliang; Jia, Jianjun; Cai, Tinglu
2017-11-01
An extensive system of tidal channels, starting with Jinshan Trough in the east, is located along the north shore of Hangzhou Bay, China. This contribution investigates the morphological evolution of Jinshan Trough by using 17 bathymetric charts from a series covering a period of 51 years from 1960 to 2011. Three stages of evolution during this period are distinguishable based on the morphology and annual mean volume data. The first stage (1960-1987) is characterized by extension of the trough; the second stage (1987-1996) is a relatively stable period with some adjustments in the trough morphology; the third stage (1996-2011) is marked by the processes of erosion and deposition in the beginning of the period and a subsequent slow erosion process. Spatio-temporal variability of the trough was evaluated by using empirical orthogonal function (EOF) analysis. The first eigenfunction indicates that erosion is the main evolution process and there exists three stages similar to those distinguished from volume variations. The second eigenfunction mainly reflects erosion and deposition in the northwest part of the trough located in the flood tidal current shadow area of the artificial headland in Jinshan. The third eigenfunction mainly reflects annual fluctuations of erosion and deposition in the side slope at the artificial headland in Jinshan. A particularly intense erosion process occurred between 1996 and 1998. The major effects on morphological evolution in Jinshan Trough from 1960 to 2011 were investigated and tentative conclusions were presented. Continuous coastal reclamations in Jinshan had the most pronounced effect on the morphological evolution during the first and the second stages. The storm surge had a pronounced effect on the evolution at the beginning of the third stage.
Solar thermal electricity generation
NASA Astrophysics Data System (ADS)
Gasemagha, Khairy Ramadan
1993-01-01
This report presents the results of modeling the thermal performance and economic feasibility of large (utility scale) and small solar thermal power plants for electricity generation. A number of solar concepts for power systems applications have been investigated. Each concept has been analyzed over a range of plant power ratings from 1 MW(sub e) to 300 MW(sub e) and over a range of capacity factors from a no-storage case (capacity factor of about 0.25 to 0.30) up to intermediate load capacity factors in the range of 0.46 to 0.60. The solar plant's economic viability is investigated by examining the effect of various parameters on the plant costs (both capital and O & M) and the levelized energy costs (LEC). The cost components are reported in six categories: collectors, energy transport, energy storage, energy conversion, balance of plant, and indirect/contingency costs. Concentrator and receiver costs are included in the collector category. Thermal and electric energy transport costs are included in the energy transport category. Costs for the thermal or electric storage are included in the energy storage category; energy conversion costs are included in the energy conversion category. The balance of plant cost category comprises the structures, land, service facilities, power conditioning, instrumentation and controls, and spare part costs. The indirect/contingency category consists of the indirect construction and the contingency costs. The concepts included in the study are (1) molten salt cavity central receiver with salt storage (PFCR/R-C-Salt); (2) molten salt external central receiver with salt storage (PFCR/R-E-Salt); (3) sodium external central receiver with sodium storage (PFCR/RE-Na); (4) sodium external central receiver with salt storage (PFCR/R-E-Na/Salt); (5) water/steam external central receiver with oil/rock storage (PFCR/R-E-W/S); (6) parabolic dish with stirling engine conversion and lead acid battery storage (PFDR/SLAB); (7) parabolic dish with stirling engine conversion and redox advanced battery storage (PFDR/S-RAB); and (8) parabolic trough with oil/rock storage (LFDR/R-HT-45). Key annual efficiency and economic results of the study are highlighted in tabular format for plant sizes and capacity factor that resulted in the lowest LEC over the analysis range.
Magnetic anomaly map of the central Cayman Trough, northwestern Caribbean Sea
Dillon, William P.; Edgar, N. Terence; Parson, Lindsay M.; Scanlon, Kathryn M.; Driscoll, George R.; Jacobs, Colin L.
1993-01-01
This is the first large-scale published map of magnetic anomalies in the central Cayman Trough area. Two previously published very small scale maps based on much less data are a regional map (Gough and Heirtzler, 1969) and a map compiled from several tracklines running parallel to the axis of the Cayman Trough (MacDonald and Holcombe, 1978).
NASA Technical Reports Server (NTRS)
2005-01-01
1 September 2005 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows an impact crater cut by troughs which formed after the crater formed. The crater and troughs have large windblown ripples on their floors. The ripples, troughs, craters, and other surfaces in this scene have all been mantled by dust. Dark streaks on slopes indicate areas where avalanches of dry dust have occurred. These features are located on Sacra Mena, a large mesa in the Kasei Valles region. Location near: 25.4oN, 66.8oW Image width: width: 3 km (1.9 mi) Illumination from: lower left Season: Northern AutumnAeolian Sediment Transport Pathways and Aerodynamics at Troughs on Mars
NASA Technical Reports Server (NTRS)
Bourke, Mary C.; Bullard, Joanna E.; Barnouin-Jha, Olivier S.
2004-01-01
Interaction between wind regimes and topography can give rise to complex suites of aeolian landforms. This paper considers aeolian sediment associated wit11 troughs on Mars and identifies a wider range of deposit types than has previously been documented. These include wind streaks, falling dunes, "lateral" dunes, barchan dunes, linear dunes, transverse ridges, sand ramps, climbing dunes, sand streamers, and sand patches. The sediment incorporated into these deposits is supplied by wind streaks and ambient Planitia sources as well as originating within the trough itself, notably from the trough walls and floor. There is also transmission of sediment between dneTsh. e flow dynamics which account for the distribution of aeolian sediment have been modeled using two-dimensional computational fluid dynamics. The model predicts flow separation on the upwind side of the trough followed by reattachment and acceleration at the downwind margin. The inferred patterns of sediment transport compare well with the distribution of aeolian forms. Model data indicate an increase of wind velocity by approx. 30 % at the downwind trough margin. This suggests that the threshold wind speed necessary for sand mobilization on Mars will be more freqentmlye t in these inclined locations.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jones, T.B.; Lester, M.; Wilkinson, A.J.
A statistical study of the F-region main ionospheric trough has been undertaken with EISCAT common programme data to assess the possibility that the trough region is a perferential region for the generation of E-region irregularities. Three years of CP-3 data from EISCAT formed the basis of this study. Backscatter observed by the coherent radar, SABRE, was also utilized to study the occurrence of irregularities in the E-region. On 26 out of the 36 days when the trough was observed by EISCAT, SABRE observed coherent backscatter. Although this percentage seems high, there was no consistent relationship between the latitude of themore » trough minimum and the latitude of peak backscatter intensity. A case study involving a four day run of EISCAT in September 1986 indicates that the trough latitude can be affected by changes in the interplanetary magnetic field north-south components. On two days rapid decreases in the latitude of the trough were related to a southward turning of the IMF and the onset of backscatter. The high percentage of occurrence of backscatter is believed to be caused by enhanced convection.« less
Crustal and upper mantle velocity structure of the Salton Trough, southeast California
Parsons, T.; McCarthy, J.
1996-01-01
This paper presents data and modelling results from a crustal and upper mantle wide-angle seismic transect across the Salton Trough region in southeast California. The Salton Trough is a unique part of the Basin and Range province where mid-ocean ridge/transform spreading in the Gulf of California has evolved northward into the continent. In 1992, the U.S. Geological Survey (USGS) conducted the final leg of the Pacific to Arizona Crustal Experiment (PACE). Two perpendicular models of the crust and upper mantle were fit to wide-angle reflection and refraction travel times, seismic amplitudes, and Bouguer gravity anomalies. The first profile crossed the Salton Trough from the southwest to the northeast, and the second was a strike line that paralleled the Salton Sea along its western edge. We found thin crust (???21-22 km thick) beneath the axis of the Salton Trough (Imperial Valley) and locally thicker crust (???27 km) beneath the Chocolate Mountains to the northeast. We modelled a slight thinning of the crust further to the northeast beneath the Colorado River (???24 km) and subsequent thickening beneath the metamorphic core complex belt northeast of the Colorado River. There is a deep, apparently young basin (???5-6 km unmetamorphosed sediments) beneath the Imperial Valley and a shallower (???2-3 km) basin beneath the Colorado River. A regional 6.9-km/s layer (between ???15-km depth and the Moho) underlies the Salton Trough as well as the Chocolate Mountains where it pinches out at the Moho. This lower crustal layer is spatially associated with a low-velocity (7.6-7.7 km/s) upper mantle. We found that our crustal model is locally compatible with the previously suggested notion that the crust of the Salton Trough has formed almost entirely from magmatism in the lower crust and sedimentation in the upper crust. However, we observe an apparently magmatically emplaced lower crust to the northeast, outside of the Salton Trough, and propose that this layer in part predates Salton Trough rifting. It may also in part result from migration of magmatic spreading centers associated with the southern San Andreas fault system. These spreading centers may have existed east of their current locations in the past and may have influenced the lower crust and upper mantle to the east of the current Salton Trough.
Fast flow of Jakobshavn Isbræ and its subglacial drainage system
NASA Astrophysics Data System (ADS)
Werder, M. A.; Joughin, I. R.
2013-12-01
Jakobshavn Isbræ and many other outlet glaciers of present and past ice sheets lie in deep troughs which often have several overdeepened sections. The subglacial drainage system of such glaciers is heavily influenced by two effects caused by the pressure dependence of the melting point of water. The melting point decreases with increasing water pressure, this enhances wall-melt in downward sloping channels and diminishes wall-melt in upward sloping channels. Thus the first effect is the well known shutdown of channels on steep adverse bed slopes of overdeepenings and the associated high water pressure/low effective pressure. The second effect is a 2D effect and has not received much/any attention so far: the orientation of a channel will be deflected from the direction of the (negative) hydraulic potential gradient (which drives the water flow) towards the steepest slope of the bed. This leads to the enhanced formation of side channels dipping into the trough at about a 45° angle. This efficient connection between the margin and the trough equalizes the hydraulic potential, again leading to higher water pressure in the trough. We investigate these two effects with the 2D subglacial drainage system model GlaDS using Jakobshavn Isbræ as an example. We compare model runs with the pressure melt term disabled and enabled. With the term disabled the main channel situated in the trough is continuous and produces a large depression in the hydraulic potential and consequently high effective pressure in the trough (1-2MPa). Conversely, with the term enabled the main channel becomes discontinuous on steep adverse bed slopes and many side channels form on the margins of the trough. This leads to a hydraulic potential in the trough which is higher than in the surrounding area and consequently the effective pressure is low (0-1MPa). Low effective pressure leads to reduced basal drag and thus to more basal sliding. The modeled large decrease of effective pressure in the trough due to the pressure dependence of the melting point of water suggests that basal drag will be small and that sliding speeds are large. Thus, this may be one of the leading causes for the fast flow of Jakobshavn Isbræ and other glaciers in deep troughs.
NASA Astrophysics Data System (ADS)
Oishi, Y.; Furumura, T.; Imamura, F.; Yamashita, K.; Sugawara, D.
2016-12-01
In this study, we investigate the response of bays to the tsunami of Nankai-trough earthquake based on tsunami simulations and demonstrate the possibility that sea-level oscillation of each bay, which is induced by an incident tsunami, interacts with those of other bays. Several major cities in Japan, including the capital, are located in the bays near the Nankai trough and it is assumed that these cities will be largely affected by the tsunamis caused by recurring large earthquakes at the trough. Therefore, it is very important for these populated cities to understand the mechanism and properties of the tsunami-induced oscillations that continue for a long time in bays to draw up evacuation plans. To investigate the response of bays for various tsunamis that may occur in the Nankai trough area, we distributed the tsunami sources that have the form of a 2-D Gaussian function around the Nankai trough. From simulations with these sources, it was found that strong oscillations of bay water occur when the source is located in the bay itself or when strong oscillations occur in other bays. For example, when the Tosa bay oscillates, the Tokyo bay that is 600 km away from the Tosa bay also oscillates. Among the bays around the Nankai trough, the Suruga bay, the deepest bay in Japan with a 2500-km depth, oscillates more strongly than other bays for most cases. To check the influence of the strong oscillations in the Suruga bay on other bays, we conducted tsunami simulations using a modified topography model in which the Suruga bay is artificially landfilled. As a consequence, the strength of oscillations in the adjacent bays are reduced by 20-30%, suggesting the large influence of the distinguished oscillation of the Suruga bay on these bays. We finally conducted tsunami simulations using the eleven Nankai-trough earthquake scenarios of the Central Disaster Prevention Council (CDPC) of Japan as tsunami sources, and the mutual relation regarding the strengths of oscillations among the bays around the Nankai trough was confirmed irrespective of the earthquake scenarios. The results of this study suggest that oscillations of the bays do not occur independently in each bay but simultaneously occur among the bays. More detailed characteristics of the response of the bays to the tsunamis in the Nankai-trough area will be discussed in the presentation.
A Geospatial Comparison of Distributed Solar Heat and Power in Europe and the US
Norwood, Zack; Nyholm, Emil; Otanicar, Todd; Johnsson, Filip
2014-01-01
The global trends for the rapid growth of distributed solar heat and power in the last decade will likely continue as the levelized cost of production for these technologies continues to decline. To be able to compare the economic potential of solar technologies one must first quantify the types and amount of solar resource that each technology can utilize; second, estimate the technological performance potential based on that resource; and third, compare the costs of each technology across regions. In this analysis, we have performed the first two steps in this process. We use physical and empirically validated models of a total of 8 representative solar system types: non-tracking photovoltaics, 2d-tracking photovoltaics, high concentration photovoltaics, flat-plate thermal, evacuated tube thermal, concentrating trough thermal, concentrating solar combined heat and power, and hybrid concentrating photovoltaic/thermal. These models are integrated into a simulation that uses typical meteorological year weather data to create a yearly time series of heat and electricity production for each system over 12,846 locations in Europe and 1,020 locations in the United States. Through this simulation, systems composed of various permutations of collector-types and technologies can be compared geospatially and temporally in terms of their typical production in each location. For example, we see that silicon solar cells show a significant advantage in yearly electricity production over thin-film cells in the colder climatic regions, but that advantage is lessened in regions that have high average irradiance. In general, the results lead to the conclusion that comparing solar technologies across technology classes simply on cost per peak watt, as is usually done, misses these often significant regional differences in annual performance. These results have implications for both solar power development and energy systems modeling of future pathways of the electricity system. PMID:25474632
A geospatial comparison of distributed solar heat and power in Europe and the US.
Norwood, Zack; Nyholm, Emil; Otanicar, Todd; Johnsson, Filip
2014-01-01
The global trends for the rapid growth of distributed solar heat and power in the last decade will likely continue as the levelized cost of production for these technologies continues to decline. To be able to compare the economic potential of solar technologies one must first quantify the types and amount of solar resource that each technology can utilize; second, estimate the technological performance potential based on that resource; and third, compare the costs of each technology across regions. In this analysis, we have performed the first two steps in this process. We use physical and empirically validated models of a total of 8 representative solar system types: non-tracking photovoltaics, 2d-tracking photovoltaics, high concentration photovoltaics, flat-plate thermal, evacuated tube thermal, concentrating trough thermal, concentrating solar combined heat and power, and hybrid concentrating photovoltaic/thermal. These models are integrated into a simulation that uses typical meteorological year weather data to create a yearly time series of heat and electricity production for each system over 12,846 locations in Europe and 1,020 locations in the United States. Through this simulation, systems composed of various permutations of collector-types and technologies can be compared geospatially and temporally in terms of their typical production in each location. For example, we see that silicon solar cells show a significant advantage in yearly electricity production over thin-film cells in the colder climatic regions, but that advantage is lessened in regions that have high average irradiance. In general, the results lead to the conclusion that comparing solar technologies across technology classes simply on cost per peak watt, as is usually done, misses these often significant regional differences in annual performance. These results have implications for both solar power development and energy systems modeling of future pathways of the electricity system.
Study of Using Solar Thermal Power for the Margarine Melting Heat Process.
Sharaf Eldean, Mohamed A; Soliman, A M
2015-04-01
The heating process of melting margarine requires a vast amount of thermal energy due to its high melting point and the size of the reservoir it is contained in. Existing methods to heat margarine have a high hourly cost of production and use fossil fuels which have been shown to have a negative impact on the environment. Thus, we perform an analytical feasibility study of using solar thermal power as an alternative energy source for the margarine melting process. In this study, the efficiency and cost effectiveness of a parabolic trough collector (PTC) solar field are compared with that of a steam boiler. Different working fluids (water vapor and Therminol-VP1 heat transfer oil (HTO)) through the solar field are also investigated. The results reveal the total hourly cost ($/h) by the conventional configuration is much greater than the solar applications regardless of the type of working fluid. Moreover, the conventional configuration causes a negative impact to the environment by increasing the amount of CO 2 , CO, and NO 2 by 117.4 kg/day, 184 kg/day, and 74.7 kg/day, respectively. Optimized period of melt and tank volume parameters at temperature differences not exceeding 25 °C are found to be 8-10 h and 100 m 3 , respectively. The solar PTC operated with water and steam as the working fluid is recommended as a vital alternative for the margarine melting heating process.
Controls of bioclastic turbidite deposition in eastern Muertos Trough northeast Caribbean Sea
DOE Office of Scientific and Technical Information (OSTI.GOV)
Forsthoff, G.M.; Holcombe, T.L.
1985-02-01
A study of seismic-reflection profiles and sediment cores establishes regional bathymetric and source area control over the composition, transport, and distribution of turbidites in the eastern Muertos Trough, Bioclastic (carbonate) turbidites dominate the eastern portion of the trough. Analyses of carbon content and sand-sized components suggest that the bioclastic turbidites (characterized by planktonic foraminifera, pteropods, and sponge spicules) are reworked pelagic oozes originally deposited on the outer-shelf and upper-slope areas south of St. Croix and eastern Puerto Rico. The presence of several intrashelf and upper-slope basins prohibits shallow-water carbonate sediments from entering the Muertos Trough. Volcanic rock fragments derived frommore » Puerto Rico are transported to the trough via the Guayanilla Canyon system. Mixing of the volcanic fragments with outer-shelf and upper-slope lutites results in mixed bioclastic-terrigenous turbidites south of central and western Puerto Rico. The paucity of shallow-water carbonate sediments in the trough suggests that the submarine canyons are effective conduits for the rapid transport of volcaniclastic sands across the shelf and thereby prevent extensive mixing with inner- and middle-shelf carbonate sediments. Sediment transport within the trough is primarily axial in an east-west direction. Outer trench-wall fault scarps, south of Guayanilla Canyon, limit the southerly progradation of the trench-wedge facies and deflect incoming gravity flows in a down-axis (westward) direction. Where no faults exist, the trench wedge progrades southward and interfingers with the pelagic sediments of the northern Venezuelan basin.« less
Weak lensing by galaxy troughs in DES Science Verification data
Gruen, D.; Friedrich, O.; Amara, A.; ...
2015-11-29
In this study, we measure the weak lensing shear around galaxy troughs, i.e. the radial alignment of background galaxies relative to underdensities in projections of the foreground galaxy field over a wide range of redshift in Science Verification data from the Dark Energy Survey. Our detection of the shear signal is highly significant (10σ–15σ for the smallest angular scales) for troughs with the redshift range z ϵ [0.2, 0.5] of the projected galaxy field and angular diameters of 10 arcmin…1°. These measurements probe the connection between the galaxy, matter density, and convergence fields. By assuming galaxies are biased tracers ofmore » the matter density with Poissonian noise, we find agreement of our measurements with predictions in a fiducial Λ cold dark matter model. The prediction for the lensing signal on large trough scales is virtually independent of the details of the underlying model for the connection of galaxies and matter. Our comparison of the shear around troughs with that around cylinders with large galaxy counts is consistent with a symmetry between galaxy and matter over- and underdensities. In addition, we measure the two-point angular correlation of troughs with galaxies which, in contrast to the lensing signal, is sensitive to galaxy bias on all scales. The lensing signal of troughs and their clustering with galaxies is therefore a promising probe of the statistical properties of matter underdensities and their connection to the galaxy field.« less
The Nova-Canton Trough and the Late Cretaceous evolution of the central Pacific
NASA Astrophysics Data System (ADS)
Joseph, Devorah; Taylor, Brain; Shor, Alexander N.; Yamazaki, Toshitsugu
Free-air gravity anomalies derived from satellite altimetry data show that the major Pacific fracture zones, from the Pau to Marquesas, are co-polar about an Euler pole located at 150.5°W, 34.6°S for the period preceding chron 33 and including a large portion of the Cretaceous Normal Superchron. They also show continuity of the Clipperton Fracture Zone through the Line Islands to the Nova-Canton ridge and trough; this Canton-Clipperton trend is co-polar to the same pole. Sidescan-sonar and bathymetry data in the Nova-Canton Trough region reveal N140°E-striking abyssal hill topography south of the N70°E-striking structures of the Nova-Canton Trough and crustal fabric striking normal to the trough (N160°E) to the north. We conclude that the Nova-Canton Trough is the Middle Cretaceous extension of the Clipperton Fracture Zone. We propose that the anomalous depths (7000-8400 m) of the trough between 167°30'-168°30'W are the result of a complex plate reorganization. Conjugate magnetic anomaly lineations M1-M3 in the Phoenix lineations between the Central Pacific Fracture Zone and the Phoenix Fracture Zone and the absence of lineations younger than anomaly M3 west of the Phoenix Fracture Zone suggest that spreading may have gradually ceased along the Pacific-Phoenix system from west to east. We infer that the remaining active segment of the Pacific-Phoenix spreading system after anomaly M1 time was the easternmost section of the Phoenix lineations. At ˜M0 time, the Pacific-Phoenix spreading axis stretched from lineated bathymetric depressions lying between 180°W and the Phoenix Islands to ˜168°W and included the western deep of the Nova-Canton Trough. We hypothesize that accretion terminated on the Pacific-Phoenix spreading axis shortly after M0 time and that the absence of an M0 isochron in the region between the eastern Phoenix lineations and the Nova-Canton Trough, or along the Nova-Canton Trough itself, may be due to a decrease in spreading rate prior to termination. We concur with previous hypotheses that portions of the Phoenix plate were trapped on the Pacific plate by a ridge jump south to the nascent Manihiki Plateau; some portions were overprinted by the Aptian volcanism that formed the Manihiki Plateau and Robbie Ridge. Pacific-Farallon spreading south of the Nova-Canton Trough jumped westwards, initiating transcurrent motion along the easternmost section of the failed ˜M0 spreading axis (the western deep of the Nova-Canton Trough) which subsequently became the western end of the Clipperton (Pacific-Farallon) transform. In our reconstruction, the northeast and southeast margins of the Manihiki Plateau are rifted margins that form the western limit of Pacific-Farallon spreading between the Clipperton, Galapagos, and Marquesas fracture zones.
NASA Astrophysics Data System (ADS)
Adolph, Winny; Jung, Richard; Schmidt, Alena; Ehlers, Manfred; Heipke, Christian; Bartholomä, Alexander; Farke, Hubert
2017-04-01
The Wadden Sea is a large coastal transition area adjoining the southern North Sea uniting ecological key functions with an important role in coastal protection. The region is strictly protected by EU directives and national law and is a UNESCO World Heritage Site, requiring frequent quality assessments and regular monitoring. In 2014 an intertidal bedform area characterised by alternating crests and water-covered troughs on the tidal flats of the island of Norderney (German Wadden Sea sector) was chosen to test different remote sensing methods for habitat mapping: airborne lidar, satellite-based radar (TerraSAR-X) and electro-optical sensors (RapidEye). The results revealed that, although sensitive to different surface qualities, all sensors were able to image the bedforms. A digital terrain model generated from the lidar data shows crests and slopes of the bedforms with high geometric accuracy in the centimetre range, but high costs limit the operation area. TerraSAR-X data enabled identifying the positions of the bedforms reflecting the residual water in the troughs also with a high resolution of up to 1.1 m, but with larger footprints and much higher temporal availability. RapidEye data are sensitive to differences in sediment moisture employed to identify crest areas, slopes and troughs, with high spatial coverage but the lowest resolution (6.5 m). Monitoring concepts may differ in their remote sensing requirements regarding areal coverage, spatial and temporal resolution, sensitivity and geometric accuracy. Also financial budgets limit the selection of sensors. Thus, combining differing assets into an integrated concept of remote sensing contributes to solving these issues.
Galindo, Danielle; Villanueva, Linda; Nguyen, Cathy; Patel, Milan; Borbridge, Lisa; Attar, Mayssa; Schiffman, Rhett M.; Hollander, David A.
2011-01-01
Abstract Purpose Anti-inflammatory activity of topical nonsteroidal anti-inflammatory drugs is mediated by suppression of cyclooxygenase (COX) isoenzymes. This study compared ocular penetration and inflammation suppression of topical ketorolac 0.45% and bromfenac 0.09% ophthalmic solutions in a rabbit model. Methods At hour 0, 36 rabbits received ketorolac 0.45%, bromfenac 0.09%, or an artificial tear 3 times once every 20 min. Half of the rabbits in each group then received intravenous injections of lipopolysaccharide (LPS) and fluorescein isothiocyanate (FITC)–dextran at hour 1, and the other half at hour 10. Aqueous and iris-ciliary body (ICB) samples were collected in the former group at hour 2 (peak) and in the latter group at hour 11 (trough) An additional group of 6 animals received only FITC-dextran, and samples were collected 1 h later. Peak and trough nonsteroidal anti-inflammatory drug concentrations were compared with previously determined half-maximal inhibitory concentrations (IC50) for COX isoenzymes. Results Peak and trough aqueous and ICB concentrations of ketorolac were at least 7-fold or greater than those of bromfenac. At peak levels, both ketorolac 0.45% and bromfenac 0.09% significantly inhibited LPS-induced aqueous prostaglandin E2 and FITC-dextran elevation (P < 0.01). At trough, both study drugs significantly inhibited LPS-induced aqueous prostaglandin E2 elevation (P < 0.05), but only ketorolac 0.45% significantly reduced LPS-induced aqueous FITC-dextran elevation (P < 0.01). Aqueous and ICB ketorolac concentrations exceeded its IC50 for COX-1 and COX-2 at peak and trough. Aqueous and ICB bromfenac levels exceeded its IC50 for COX-2 at peak and trough, but not for COX-1 at trough aqueous levels and peak and trough ICB levels. Conclusions Both ketorolac 0.45% and bromfenac 0.09% effectively suppressed inflammation at peak. At trough, only ketorolac 0.45% effectively suppressed inflammation as measured by FITC-dextran leakage. The difference in inflammation suppression may be due to differences in tissue concentrations and/or greater COX-1 suppression by ketorolac 0.45%. PMID:21351868
Multiple-dose pharmacokinetics of daptomycin during continuous venovenous haemodiafiltration.
Wenisch, Judith M; Meyer, Brigitte; Fuhrmann, Valentin; Saria, Katrin; Zuba, Clara; Dittrich, Peter; Thalhammer, Florian
2012-04-01
Daptomycin is bactericidal against Gram-positive bacteria, with peak-dependent effect but trough-dependent toxicity. This study was performed to develop dosing recommendations in continuous venovenous haemodiafiltration (CVVHDF). Nine critically ill patients in intensive care units of the Medical University Hospital of Vienna, requiring CVVHDF due to acute renal failure and antimicrobial treatment, were included. Blood and effluent samples were collected over 72 h to determine daptomycin concentrations by HPLC. Pharmacokinetic parameters were based on 10 sampling timepoints during the first 24 h, and peak and trough samples thereafter. An open two-compartment model was fitted to each subject's plasma concentration-time data. Simulations of serum concentration-time profiles after different doses and intervals were performed using ADAPT 5. Peak plasma concentrations with 6 mg/kg daptomycin were 62.2 ± 16.2, 66.1 ± 17.3 and 78.5 ± 22.1 mg/L on days 1, 2 and 3, respectively. The total clearance was 6.1 ± 4.9 mL/min, and the elimination half-life was 17.8 ± 9.7 h. Daptomycin was filtrated and could therefore be measured in the effluent. Protein binding was lower than that seen in healthy volunteers. The unbound fraction was 16 ± 4.5%. All subjects maintained trough serum concentrations above 4 mg/L, at which relevant pathogens are considered daptomycin-susceptible. Accumulation resulted when daptomycin was given every 24 h. Simulation of 8 mg/kg daptomycin given every 48 h resulted in adequate levels without accumulation. We recommend 8 mg/kg daptomycin every 48 h in patients on CVVHDF and therapeutic drug monitoring, if possible.
Francart, Suzanne J; Hawes, Emily M; Deal, Allison M; Adcock, Dorothy M; Gosselin, Robert; Jeanneret, Cheryl; Friedman, Kenneth D; Moll, Stephan
2014-06-01
Knowledge of anticoagulation status during rivaroxaban therapy is desirable in certain clinical situations. It was the study objective to determine coagulation tests most useful for assessing rivaroxaban's anticoagulant effect. Peak and trough blood samples from 29 patients taking rivaroxaban 20 mg daily were collected. Mass spectrometry and various coagulation assays were performed. "On-therapy range" was defined as the rivaroxaban concentrations determined by LC-MS/MS. A "misprediction percentage" was calculated based on how often results of each coagulation assay were in the normal reference range, while the rivaroxaban concentration was in the "on-therapy" range. The on-therapy range was 8.9-660 ng/ml. The misprediction percentages for prothrombin time (PT) and activated partial thromboplastin time (aPTT), using multiple reagents and coagulometers, ranged from 10%-52% and 31%-59%, respectively. PT, aPTT and activated clotting time (ACT) were insensitive to trough rivaroxaban: 59%, 62%, and 80% of samples had a normal result, respectively. Over 95% of PT and ACT values were elevated at peak. Four different rivaroxaban calibrated anti-Xa assays had R² values >0.98, demonstrating strong correlations with rivaroxaban drug levels. In conclusion, PT, aPTT and ACT are often normal in patients on therapeutic doses of rivaroxaban. However, PT and ACT may have clinical utility at higher drug plasma levels. Rivaroxaban calibrated anti-factor Xa assays can accurately identify low and high on-therapy rivaroxaban drug levels and, therefore, have superior utility in all clinical situations where assessment of anticoagulation status may be beneficial.
Iqbal, Ahmar; Barnes, Neil C; Brooks, Jean
2015-10-01
Chronic obstructive pulmonary disease (COPD) patients with blood eosinophil (EOS) count ≥ 2% benefit from exacerbation reductions with inhaled corticosteroids (ICSs). We conducted post hoc analyses to determine if EOS count ≥ 2% is a marker for greater responsiveness to the bronchodilators umeclidinium (UMEC; long-acting muscarinic antagonist), vilanterol (VI; long-acting β2-agonist) or UMEC/VI combination. Effects of once-daily UMEC/VI 62.5/25, UMEC 62.5 and VI 25 µg versus placebo on trough forced expiratory volume in one second (FEV1), Transition Dyspnoea Index (TDI), St George's Respiratory Questionnaire (SGRQ) scores and adverse event (AE) incidences in four completed, 6-month studies were assessed by EOS subgroup. Trough FEV1 was also evaluated by ICS use and EOS subgroup. Analyses were performed using a repeated measures model. At baseline, 2437 of 4647 (52%) patients had EOS count ≥ 2%. Overall, ≈ 50% of patients used ICSs. At day 169, no notable variations were observed in trough FEV1 least squares mean differences between EOS subgroups versus placebo for UMEC/VI, UMEC and VI; results according to ICS use were similar. No differences were reported between EOS subgroups in TDI and SGRQ scores on day 168, or for incidences of AEs, serious AEs and AEs leading to withdrawal. Response to UMEC/VI, UMEC and VI in terms of trough FEV1, dyspnoea and health-related quality of life was similar for COPD patients with baseline EOS counts ≥ 2 or <2%. EOS count did not appear to predict bronchodilator response in either ICS users or non-users.
Facies mosaic in a fiord: Carboniferous-Permian Talchir Formation, India
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bose, P.K.; Mukhopadhyay, G.; Bhattacharya, H.N.
1988-01-01
Facies analysis of the basal 37m of the Carboniferous-Permian Talchir Formation is a glacier-fed bedrock trough in Dudhi nala, Bihar, India, provides insight into the pattern of sedimentation of course gravels in a fiord. Rapid transitions between 11 recognized facies, together with their complex organization, random variability in bed thickness, and differences in clast, shape, size, and composition indicate coalescence of fans developed from numerous point sources bordering the elongated trough. Converging slide masses and lodgment tillites on the slopes flanking the trough give way to sediment gravity flow deposits composed of an array of conglomerates (matrix and clast supportedmore » with normal, inverse of absence of grading), attendant turbidite sands, and prodelta mud. The rheology of the in-trough flows ranged from plastic laminar to fluidal turbulent in response to flow from slope to floor of the trough. Rapid calving of icebergs during the onset of deglaciation established a wave regime at the mouth of the trough and deposited cross-stratified sandstone replete with dripstones. The impact of large dripstones landing triggered turbidity currents. Continued rise in water level led to eventual preservation of the fan complex under onlapping wave-built shoal facies that grade into a sequence of upward-thinning hummocky cross-stratified sandstone beds virtually devoid of dripstones.« less
Altitude Variation of the Plasmapause Signature in the Main Ionospheric Trough
NASA Technical Reports Server (NTRS)
Grebowsky, Joseph M.; Benson, Robert F.; Webb, Phillip A.; Truhlik, Vladimir; Bilitza, Dieter
2009-01-01
The projection of the plasmapause magnetic-field lines to low altitudes, where the light-ion chemistry is dominated by O(+), tends to occur near the minimum electron density in the main (midlatitude) electron density trough at night. With increasing attitude in the trough, where H(+) emerges as the dominant iota on the low-latitude boundary, we have found cases where the plasmapause field lines are located on the sharp low-Latitude side of the trough as expected if this topside ionosphere H(+) distribution varies in step with the plasmapause gradient in the distant plasmasphere. These conclusions are based on near-equatorial crossings of the plasmapause (corresponding to the steep gradient in the dominant species H(+) by the Explorer-45 satellite as determined from electric-field measurements by Maynard and Cauffman in the early 1970s and ISIS-2 ionospheric topside-sounder measurements. The former data have now been converted to digital form and made available at http://nssdcftp.gsfc.nasa.gov. The latter provide samples of nearly coincident observations of ionospheric main trough crossings near the same magnetic-field lines of the Explorer 45-determined equatorial plasmapause. The ISIS-2 vertical electron density profiles are used to infer where the F-region transitions from an O(+) to a H(+) dominated plasma through the main trough boundaries.
Climatology of the winter Red Sea Trough
NASA Astrophysics Data System (ADS)
Awad, Adel M.; Almazroui, Mansour
2016-12-01
In this study, a new and objective method for detecting the Red Sea Trough (RST) was developed using mean sea level pressure (SLP) data from NCEP/NCAR reanalysis dataset from the winters of 1956 to 2015 to identify the Sudan Low and its trough. Approximately 96% of the winter RSTs were generated near two main sources, South Sudan and southeastern Sudan, and approximately 85% of these troughs were in four of the most outer areas surrounding the northern Red Sea. Moreover, from west to east of the Red Sea, the RST was affected by the relationships between the Siberian High and Azores High. The RST was oriented to the west when the strength of the Siberian High increased and to the east when the strength of the Azores High increased. Furthermore, the synoptic features of the upper level of the RST emphasize the impacts of subtropical anticyclones at 850 hPa on the orientation of the RST, the impacts of the northern cyclone trough and the maximum wind at a pressure level of 250 hPa. The average static stability between 1000 hPa and 500 hPa demonstrated that the RST followed the northern areas of low static stability. The results from previous studies were confirmed by a detailed case study of the RST that extended to its central outermost area. The results of a detailed case study of the short RST indicated that the trough becomes shorter with increasing static stability and that the Azores and Siberian high-pressure systems influence the northern region of the trough while the maximum upper wind shifts south of the climate position.
Petroleum prospects of Benue trough, Nigeria
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nawachukwu, J.I.
1985-04-01
Exploration activities in the Benue trough have been minimal over the years, mainly because of large petroleum deposits found in the adjoining Niger delta and early gas finds in the Anambra basin, south of the Benue trough. The recent increase in exploration activities in the trough has necessitated a reevaluation of the petroleum potentials of the basin. In this study, the time-temperature index (TTI) method was used to evaluate petroleum prospects of the basin. An increase in geothermal gradient resulted in a decrease in depth to the oil window, with the sediments maturing earlier at higher geothermal gradients. At geothermalmore » gradients of 1.5-1.9/sup 0/F/100 ft (2.73.5/sup 0/C/100 m) and maximum TTI values, the Asu River Group and the Eze-Aku Group of sediments are still within the gas-generating stage. The Awgu Shale and the Nkporo Shale are capable of generating gas at geothermal gradients of 2.3-2.7/sup 0/F/100 ft (4.2-4.9/sup 0/C/100 m). The Benue trough is essentially a gas-condensate basin with little oil. Exploration targets in the basin include both the sub-Santonian and superSantonian sediments, with the Eze-Aku Group, Awgu Shale, and Nkporo Shale being more prospective than the stratigraphically lower Asu River Group. In general, the middle Benue trough is considered to be the most prospective area within the trough because depths to the mature zones are moderate (6,600-13,000 ft; 2-4 km). These depths are variable, decreasing northeastward and increasing southwestward toward the Niger delta.« less
Katabatic jumps in the Martian northern polar regions
NASA Astrophysics Data System (ADS)
Spiga, Aymeric; Smith, Isaac
2018-07-01
Martian polar regions host active regional wind circulations, such as the downslope katabatic winds which develop owing to near-surface radiative cooling and sloped topography. Many observations (stratigraphy from radar profiling, frost streaks, spectral analysis of ices) concur to show that aeolian processes play a key role in glacial processes in Martian polar regions. A spectacular manifestation of this resides in elongated clouds that forms within the polar spiral troughs, a series of geological depressions in Mars' polar caps. Here we report mesoscale atmospheric modeling in Martian polar regions making use of five nested domains operating a model downscaling from horizontal resolutions of twenty kilometers to 200 m in a typical polar trough. We show that strong katabatic jumps form at the bottom of polar troughs with an horizontal morphology and location similar to trough clouds, large vertical velocity (up to +3 m/s) and temperature perturbations (up to 20 K) propitious to cloud formation. This strongly suggests that trough clouds on Mars are caused by katabatic jumps forming within polar troughs. This phenomena is analogous to the terrestrial Loewe phenomena over Antarctica's slopes and coastlines, resulting in a distinctive "wall of snow" during katabatic events. Our mesoscale modeling results thereby suggest that trough clouds might be present manifestations of the ice migration processes that yielded the internal cap structure discovered by radar observations, as part of a "cyclic step" process. This has important implications for the stability and possible migration over geological timescales of water ice surface reservoirs-and, overall, for the evolution of Mars' polar caps over geological timescales.
Shin, Hyoshim; Cho, Min-Chul; Kim, Rock Bum; Kim, Chang-Hun; Choi, Nack-Cheon; Kim, Soo-Kyung; Koh, Eun-Ha
2018-02-01
Apixaban is effective and safe for preventing stroke, and its usage has increased exponentially in recent years. However, data concerning the therapeutic range of apixaban is limited. This study determined the trough and peak levels of apixaban-specific anti-factor Xa activity (AFXaA) in acute ischemic stroke patients with non-valvular atrial fibrillation (NVAF) in Korea. The study included 85 patients who received apixaban. Blood samples were taken to measure the trough and peak levels of AFXaA using a chromogenic anti-factor assay, as well as prothrombin time (PT) and activated partial thromboplastin time (aPTT). We also reviewed complications such as major bleeding of patients treated with apixaban. In patients given a 5.0-mg apixaban dose, the median trough and peak levels of AFXaA were 104.5 and 202.0 ng/mL. In patients given a 2.5-mg apixaban dose, the median trough and peak AFXaA levels were 76.0 and 151.0 ng/mL. The PT showed a positive correlation with increased AFXaA activity at both levels (Trough R = 0.486, Peak R = 0.592), but the aPTT had no relationship with AFXaA activity at both levels (Trough R = 0.181, Peak R = 0.129). Two cases with intracranial bleeding belonged to the highest AFXaA quartile (Trough, p = 0.176; Peak, p = 0.053). In conclusion, we determined the trough and peak levels of AFXaA in patients with NVAF while being treated with the apixaban in Korea. Our results could be used as a starting point when setting the reference ranges for laboratories using anti-Xa assay. Large-scale studies are needed to establish the reference range for AFXaA in patients with NVAF.
Yacoub, W; Williet, N; Pouillon, L; Di-Bernado, T; De Carvalho Bittencourt, M; Nancey, S; Lopez, A; Paul, S; Zallot, C; Roblin, X; Peyrin-Biroulet, L
2018-04-01
The correlation between vedolizumab trough levels during induction therapy and mucosal healing remains unknown. To compare early vedolizumab trough levels in patients with and without mucosal healing within the first year after treatment initiation. We prospectively collected vedolizumab trough levels in all inflammatory bowel disease patients at weeks 2, 6 and 14 of vedolizumab treatment in three French referral centres between 1 June 2014 and 31 March 2017. Results of every patient that underwent mucosal assessment by magnetic resonance imaging and/or endoscopy in the first year after treatment initiation were analysed. Median vedolizumab trough levels in the overall population (n = 82) were 27 μg/mL (interquartile range, IQR 21.2-33.8 μg/mL) at week 2, 23 μg/mL (IQR 15-34.5 μg/mL) at week 6 and 10.7 μg/mL (IQR 4.6-20.4 μg/mL) at week 14. Only median vedolizumab trough levels at week 6 differed between patients with and without mucosal healing within the first year after treatment initiation (26.8 vs 15.1 μg/mL, P = 0.035). A cut-off trough level of 18 μg/mL at week 6 predicted mucosal healing within the first year after the start of vedolizumab with an area under the receiver operating curve of 0.735 (95% confidence interval 0.531-0.939). A vedolizumab trough level above 18 μg/mL at week 6 was the only independent variable associated with mucosal healing within the first year of treatment (odds ratio 15.7, 95% confidence interval 2.4-173.0, P = 0.01). Early therapeutic drug monitoring might improve timely detection of vedolizumab-treated patients in need for an intensified dosing regimen. © 2018 John Wiley & Sons Ltd.
NASA Technical Reports Server (NTRS)
1980-01-01
The effect of concentration level on the specific power for a deployable, thin, gallium arsenide cell array in geosynchronous orbit for 10 years in conjunction with a two dimensional flat plate trough concentrator (V trough) and also with a multiple flat plate concentrator was investigated as well as the effects for a conventional silicon cell array on a rigid substrate. For application to a thin GaAs array at 1 AU for 10 years, the V trough produces a 19% benefit in specific power and a dramatic reduction in array area, while the multiple flat plate collector design is not only of no benefit, but is a considerable detriment. The benefit it achieves by reducing array area is duplicated by the 2D design. For the silicon array on a rigid substrate, improvement in performance due to a concentrator with ordinary mirror coating is quite small: 9% increase in specific power, and 13% reduction in array area. When the concentrator mirrors are coated with an improved cold mirror coating, somewhat more significant results are obtained: 31% specific power improvement; and 27% area reduction. In both cases, a 10 year exposure reduces BOL output by 23%.
Brandão, Rita K C; de Carvalho, Gleidson G P; Silva, Robério R; Dias, Daniel L S; Mendes, Fabrício B L; Lins, Túlio O J D'A; Pereira, Maria M S; Guimarães, Joanderson O; Tosto, Manuela S L; Rufino, Luana M de A; de Araujo, Maria L G M L
2018-01-01
The aim of this study was to evaluate the correlation between production performance and feeding behavior of steers reared on pasture during the rainy-dry transition period. Twenty-two ½ Holstein-Zebu crossbred steers at an average age of 10 months and with an average initial body weight of 234.5 ± 16.0 kg were distributed in a completely randomized design with two types of supplementation and eleven replications. Pearson's linear correlation analysis was performed between behavioral variables and weight gain and feed conversion. Correlation coefficients were tested by the t test. The time expended feeding at the trough was positively correlated (P < 0.05) with average daily gain (ADG) and with the number of periods of permanence at the trough. Bite rate and the number of bites per day were positively correlated (P < 0.05) with ADG and negatively (P < 0.05) with feed conversion, unlike the number of bites per swallow, which was negatively correlated (P < 0.05) with ADG. There was a positive correlation (P < 0.05) between feed efficiency in dry matter and neutral detergent fiber and ADG. Feeding behavior characteristics have little association with the production performance of cattle on pasture receiving mineral or energy-protein supplementation.
Evidence and mechanism of Hurricane Fran-Induced ocean cooling in the Charleston Trough
NASA Astrophysics Data System (ADS)
Xie, Lian; Pietrafesa, L. J.; Bohm, E.; Zhang, C.; Li, X.
Evidence of enhanced sea surface cooling during and following the passage of Hurricane Fran in September 1996 over an oceanic depression located on the ocean margin offshore of Charleston, South Carolina (referred to as the Charleston Trough), [Pietrafesa, 1983] is documented. Approximately 4C° of sea surface temperature (SST) reduction within the Charleston Trough following the passage of Hurricane Fran was estimated based on SST imagery from Advanced Very High Resolution Radiometer (AVHRR) on the NOAA-14 polar orbiting satellite. Simulations using a three-dimensional coastal ocean model indicate that the largest SST reduction occurred within the Charleston Trough. This SST reduction can be explained by oceanic mixing due to storm-induced internal inertia-gravity waves.
Benchmark tests for a Formula SAE Student car prototyping
NASA Astrophysics Data System (ADS)
Mariasiu, Florin
2011-12-01
Aerodynamic characteristics of a vehicle are important elements in its design and construction. A low drag coefficient brings significant fuel savings and increased engine power efficiency. In designing and developing vehicles trough computer simulation process to determine the vehicles aerodynamic characteristics are using dedicated CFD (Computer Fluid Dynamics) software packages. However, the results obtained by this faster and cheaper method, are validated by experiments in wind tunnels tests, which are expensive and were complex testing equipment are used in relatively high costs. Therefore, the emergence and development of new low-cost testing methods to validate CFD simulation results would bring great economic benefits for auto vehicles prototyping process. This paper presents the initial development process of a Formula SAE Student race-car prototype using CFD simulation and also present a measurement system based on low-cost sensors through which CFD simulation results were experimentally validated. CFD software package used for simulation was Solid Works with the FloXpress add-on and experimental measurement system was built using four piezoresistive force sensors FlexiForce type.
NASA Astrophysics Data System (ADS)
Wang, Zhong-liang; Yamada, Masatoshi
2005-05-01
Plutonium concentrations and 240Pu/ 239Pu atom ratios in the East China Sea and Okinawa Trough sediment cores were determined by isotope dilution inductively coupled plasma mass spectrometry after separation using ion-exchange chromatography. The results showed that 240Pu/ 239Pu atom ratios in the East China Sea and Okinawa Trough sediments, ranging from 0.21 to 0.33, were much higher than the reported value of global fallout (0.18). The highest 240Pu/ 239Pu ratios (0.32-0.33) were observed in the deepest Okinawa Trough sediment samples. These ratios suggested the US nuclear weapons tests in the early 1950s at the Pacific Proving Grounds in the Marshall Islands were a major source of plutonium in the East China Sea and Okinawa Trough sediments, in addition to the global fallout source. It was proposed that close-in fallout plutonium was delivered from the Pacific Proving Grounds test sites via early direct tropospheric fallout and transportation by the North Pacific Equatorial Circulation system and Kuroshio Current into the Okinawa Trough and East China Sea. The total 239 + 240 Pu inventories in the cores were about 150-200% of that expected from direct global fallout; about 46-67% of the total inventories were delivered from the Pacific Proving Grounds. Much higher 239 + 240 Pu inventories were observed in the East China Sea sediments than in sediments of the Okinawa Trough, because in the open oceans, part of the 239 + 240 Pu was still retained in the water column, and continued Pu scavenging was higher over the margin than the trough. According to the vertical distributions of 239 + 240 Pu activities and 240Pu/ 239Pu atom ratios in these cores, it was concluded that sediment mixing was the dominant process in controlling profiles of plutonium in this area. Faster mixing in the coastal samples has homogenized the entire 240Pu/ 239Pu ratio record today; slightly slower mixing and less scavenging in the Okinawa Trough have left the surface sediment ratios closer to the modern North Pacific water end member and higher ratios (0.30-0.34) at the bottom of the cores.
NASA Astrophysics Data System (ADS)
Padhy, S.; Furumura, T.; Maeda, T.
2017-12-01
The Okinawa Trough is a young continental back-arc basin located behind the Ryukyu subduction zone in southwestern Japan, where the Philippine Sea Plate dives beneath the trough, resulting in localized mantle upwelling and crustal thinning of the overriding Eurasian Plate. The attenuation structure of the plates and surrounding mantle in this region associated with such complex tectonic environment are poorly documented. Here we present seismological evidence for these features based on the high-resolution waveform analyses and 3D finite difference method (FDM) simulation. We analyzed regional broadband waveforms recorded by F-net (NIED) of in-slab events (M>4, H>100 km). Using band-passed (0.5-8 Hz), mean-squared envelopes, we parameterized coda-decay in terms of rise-time (time from P-arrival to maximum amplitude in P-coda), decay-time (time from maximum amplitude to theoretical S-arrival), and energy-ratio defined as the ratio of energy in P-coda to that in direct P wave. The following key features are observed. First, there is a striking difference in S-excitation along paths traversing and not traversing the trough: events from SW Japan not crossing the trough show clear S waves, while those occurring in the trough show very weak S waves at a station close to the volcanic front. Second, some trough events exhibit spindle-shaped seismograms with strong P-coda excitation, obscuring the development of S waves, at back-arc stations; these waveforms are characterized by high decay-time (>10s) and high energy-ratio (>>1.0), suggesting strong forward scattering along ray paths. Third, some trough events show weak S-excitation characterized by low decay-time (<5s) and low energy-ratio (<1.0) at fore-arc stations, suggesting high intrinsic absorption. To investigate the mechanism of the observed anomalies, we will conduct FDM simulation for a suite of models comprising the key subduction features like localized mantle-upwelling and crustal thinning expected in the region. It is expected that simulation results help to resolve rift-induced crust and upper mantle anomalies in the trough showing maximum waveform distortion as we observed in broadband records, and will enhance understanding of tectonic processes related to back-arc rifting in the region.
Habitat use by larval fishes in a temperate South African surf zone
NASA Astrophysics Data System (ADS)
Watt-Pringle, Peter; Strydom, Nadine A.
2003-12-01
Larval fishes were sampled in the Kwaaihoek surf zone on the south east coast of South Africa. On six occasions between February and May 2002, larval fishes were collected in two habitat types identified in the inner surf zone using a modified beach-seine net. The surf zone habitats were classified as either sheltered trough areas or adjacent exposed surf areas. Temperature, depth and current measurements were taken at all sites. Trough habitats consisted of a depression in surf topography characterised by reduced current velocities and greater average depth than adjacent surf areas. In total, 325 larval fishes were collected. Of these, 229 were collected in trough and 96 in surf habitats. At least 22 families and 37 species were represented in the catch. Dominant families were the Mugilidae, Sparidae, Atherinidae, and Engraulidae. Dominant species included Liza tricuspidens and Liza richardsonii (Mugilidae), Rhabdosargus holubi and Sarpa salpa (Sparidae), Atherina breviceps (Atherinidae) and Engraulis japonicus (Engraulide). Mean CPUE of postflexion larvae of estuary-dependent species was significantly greater in trough areas. The proportion of postflexion larval fishes in trough habitat was significantly greater than that of preflexion stages, a result that was not apparent in surf habitat sampled. CPUE of postflexion larvae of estuary-dependent fishes was negatively correlated with current magnitude and positively correlated with habitat depth. Mean body length of larval fishes was significantly greater in trough than in surf habitats. These results provide evidence that the CPUE of postflexion larvae of estuary-dependent fishes is higher in trough habitat in the surf zone and this may be indicative of active habitat selection for areas of reduced current velocity/wave action. The implications of this behaviour for estuarine recruitment processes are discussed.
Summary of engineering-scale experiments for the Solar Detoxification of Water project
NASA Astrophysics Data System (ADS)
Pacheco, J. E.; Yellowhorse, L.
1992-03-01
This report contains a summary of large-scale experiments conducted at Sandia National Laboratories under the Solar Detoxification of Water project. The objectives of the work performed were to determine the potential of using solar radiation to destroy organic contaminants in water by photocatalysis and to develop the process and improve its performance. For these experiments, we used parabolic troughs to focus sunlight onto glass pipes mounted at the trough's focus. Water spiked with a contaminant and containing suspended titanium dioxide catalyst was pumped through the illuminated glass pipe, activating the catalyst with the ultraviolet portion of the solar spectrum. The activated catalyst creates oxidizers that attack and destroy the organics. Included in this report are a summary and discussion of the implications of experiments conducted to determine: the effect of process kinetics on the destruction of chlorinated solvents (such as trichloroethylene, perchloroethylene, trichloroethane, methylene chloride, chloroform and carbon tetrachloride), the enhancement due to added hydrogen peroxide, the optimal catalyst loading, the effect of light intensity, the inhibition due to bicarbonates, and catalyst issues.
The origin of polygonal troughs on the northern plains of Mars
NASA Astrophysics Data System (ADS)
Pechmann, J. C.
1980-05-01
The morphology, distribution, geologic environment and relative age of large-scale polygonal trough systems on Mars are examined. The troughs are steep-walled, flat-floored, sinuous depressions typically 200-800 m wide, 20-120 m deep and spaced 5-10 km apart. The mechanics of formation of tension cracks is reviewed to identify the factors controlling the scale of tension crack systems; special emphasis is placed on thermal cracking in permafrost. It is shown that because of the extremely large scale of the Martian fracture systems, they could not have formed by thermal cracking in permafrost, dessication cracking in sediments or contraction cracking in cooling lava. On the basis of photogeologic evidence and analog studies, it is proposed that polygonal troughs on the northern plains of Mars are grabens.
Monson, H.; Hutter, E.
1961-07-11
A seal is described for a cover closing an opening in the top of a pressure vessel that may house a nuclear reactor. The seal comprises a U-shaped trough formed on the pressure vessel around the opening therein, a mass of metal in the trough, and an edge flange on the cover extending loosely into the trough and dipping into the metal mass. The lower portion of the metal mass is kept melted, and the upper portion, solid. The solid pontion of the metal mass prevents pressure surges in the vessel from expelling the liquid portion of the metal mass from the trough; the liquld portion, thus held in place by the solid portion, does not allow gas to go through, and so gas cannot escape through shrinkage holes in the solid portion.
Method and apparatus for automatically detecting patterns in digital point-ordered signals
Brudnoy, David M.
1998-01-01
The present invention is a method and system for detecting a physical feature of a test piece by detecting a pattern in a signal representing data from inspection of the test piece. The pattern is detected by automated additive decomposition of a digital point-ordered signal which represents the data. The present invention can properly handle a non-periodic signal. A physical parameter of the test piece is measured. A digital point-ordered signal representative of the measured physical parameter is generated. The digital point-ordered signal is decomposed into a baseline signal, a background noise signal, and a peaks/troughs signal. The peaks/troughs from the peaks/troughs signal are located and peaks/troughs information indicating the physical feature of the test piece is output.
Method and apparatus for automatically detecting patterns in digital point-ordered signals
Brudnoy, D.M.
1998-10-20
The present invention is a method and system for detecting a physical feature of a test piece by detecting a pattern in a signal representing data from inspection of the test piece. The pattern is detected by automated additive decomposition of a digital point-ordered signal which represents the data. The present invention can properly handle a non-periodic signal. A physical parameter of the test piece is measured. A digital point-ordered signal representative of the measured physical parameter is generated. The digital point-ordered signal is decomposed into a baseline signal, a background noise signal, and a peaks/troughs signal. The peaks/troughs from the peaks/troughs signal are located and peaks/troughs information indicating the physical feature of the test piece is output. 14 figs.
Circadian rhythms in human performance and mood under constant conditions
NASA Technical Reports Server (NTRS)
Monk, T. H.; Buysse, D. J.; Reynolds, C. F. 3rd; Berga, S. L.; Jarrett, D. B.; Begley, A. E.; Kupfer, D. J.
1997-01-01
This study explored the relationship between circadian performance rhythms and rhythms in rectal temperature, plasma cortisol, plasma melatonin, subjective alertness and well-being. Seventeen healthy young adults were studied under 36 h of 'unmasking' conditions (constant wakeful bedrest, temporal isolation, homogenized 'meals') during which rectal temperatures were measured every minute, and plasma cortisol and plasma melatonin measured every 20 min. Hourly subjective ratings of global vigour (alertness) and affect (well-being) were obtained followed by one of two performance batteries. On odd-numbered hours performance (speed and accuracy) of serial search, verbal reasoning and manual dexterity tasks was assessed. On even-numbered hours, performance (% hits, response speed) was measured at a 25-30 min visual vigilance task. Performance of all tasks (except search accuracy) showed a significant time of day variation usually with a nocturnal trough close to the trough in rectal temperature. Performance rhythms appeared not to reliably differ with working memory load. Within subjects, predominantly positive correlations emerged between good performance and higher temperatures and better subjective alertness; predominantly negative correlations between good performance and higher plasma levels of cortisol and melatonin. Temperature and cortisol rhythms correlated with slightly more performance measures (5/7) than did melatonin rhythms (4/7). Global vigour correlated about as well with performance (5/7) as did temperature, and considerably better than global affect (1/7). In conclusion: (1) between-task heterogeneity in circadian performance rhythms appeared to be absent when the sleep/wake cycle was suspended; (2) temperature (positively), cortisol and melatonin (negatively) appeared equally good as circadian correlates of performance, and (3) subjective alertness correlated with performance rhythms as well as (but not better than) body temperature, suggesting that performance rhythms were not directly mediated by rhythms in subjective alertness.
2003-01-15
At first glance, this NASA Mars Odyssey image showing impact craters and linear ridges and troughs is typical of the southern highlands. However, upon closer examination migrating sand dunes are observed within the troughs.
Morton, J.L.; Holmes, M.L.; Koski, R.A.
1987-01-01
Seismic-reflection profiles over the sediment-filled Escanaba Trough at the southern Gorda Ridge reveal a series of volcanic centers that pierce the sediment. The volcanic edifices are 3 to 6 km in diameter and are spaced at 15 to 20 km intervals along the axis of the trough. Composition and form of sulfide samples obtained from the bank suggest significant interaction between hydrothermal fluids and sediment at depth, and deposition of sulfide within the sediment pile.-from Authors
{A Review of Working Group 2 (Advanced Terrestrial Systems) of the COST 296 Action}
NASA Astrophysics Data System (ADS)
Warrington, E. M.; Tulunay, E.
2009-04-01
E.M. Warrington, E. Tulunay, N.M. Abbasi, J. Azevedo, L. Bertel, A. Bourdillon, E. Benito, C. Bianchi, A. Casimiro, L. Economou, Y. Erhel, S.M. Feeney, S.D. Gunashekar, H. Haralambous, D. Lemur, F. Marie, J.P. Monilie, M. Muriuki, M. Oger M. Pietrella, V. Rannou, H. Rothkaehl, S. Saillant, S. Salous, O. Sari, A.J. Stocker, H.J. Strangeways, Y. Tulunay and N.Y. Zaalov This paper deals with the research undertaken during the COST 296 Action in Working Group 2 on Advanced Terrestrial Systems. The Working Group comprised three work packages covering various topics: Radar and Radiolocation, HF/MF Communications, and Spectrum Management. Results from this Working Group are presented in this paper, and may be summarised as follows. Aspects of HF propagation The propagation characteristics of radio signals are important parameters to consider when designing and operating radio systems. From the point of view Working Group 2 of the COST-296 Action, interest lies with effects associated with propagation via the ionosphere of signals within the HF band. Several aspects were covered: The directions of arrival and times of flight of signals received over a path oriented along the trough have been examined and several types of propagation effects identified. Of particular note, combining the HF observations with satellite measurements has identified the presence of irregularities within the floor of the trough that result in propagation displaced from the great circle direction. An understanding of the propagation effects that result in deviations of the signal path from the great circle direction are of particular relevance to the operation of HF radiolocation systems. Inclusion of the results from the above mentioned measurements into a propagation model of the northerly ionosphere (i.e. those regions of the ionosphere located poleward of, and including, the mid-latitude trough) and the use of this model to predict the coverage expected from transmitters where the signals impinge on the northerly ionosphere. Development of inversion techniques enabling backscatter ionograms obtained by an HF radar to be used to estimate the ionospheric electron density profile. This development facilitates the operation of over the horizon HF radars by enhancing the frequency management aspects of the systems. Various propagation prediction techniques have been tested against measurements made over the trough path mentioned above, and also over a long-range path between Cyprus and the UK. The effect of changes in the levels of ionospheric disturbances on the operational availability at various data throughput rates has been examined for the trough path mentioned earlier. Utilization of antenna arrays in HF systems Various radio systems are based on arrays of antennas and associated signal processing techniques. Classically, radio direction finding operates with a multi-channel receiving system connected to an array of receiving antennas. More recently, MIMO architectures have been proposed to increase the capacity of radio links by the use of antenna arrays at both the transmitter and receiver ends of the link. Several aspects were covered within COST-296: Experimental work carried out to characterise the HF channel from the point of view of HF-MIMO systems. Considering various array geometries and a diversity of the transmitting antennas, the correlation coefficients of the different transmitter-receiver paths were estimated to investigate the effectiveness of a MIMO structure for HF radio links. The dependence of the inter element correlation relatively to the sensors spacing within MIMO systems. Simulations were carried out with a model of the HF channel. Sensitivity analysis of different structures of antenna array for direction finding applications. Better robustness of heterogeneous arrays to model errors by comparison to classical homogeneous structures was demonstrated. Computation of antenna array weighting factors to reduce the sidelobe levels and to create nulls in the direction of interfering signals. HF Spectrum Management A long-term joint UK-Swedish-German project has previously been undertaken on the measurement and analysis of HF spectral occupancy over northern Europe. The results from that research were shared at COST 296 with research focussed in four areas: Procedures for measuring and modelling spectral occupancy, with final stable-day and stable-nighttime models for northern Europe, when using calibrated monopole antennas. Preliminary investigation into the possible application of artificial neural networks to predict spectral occupancy in the HF spectrum. In particular, a study of the development of a single ITU allocation model for the diurnal variation of HF spectral occupancy over Linköping, Sweden was undertaken. Application of Neural Networks as a means of optimising the reliability of HF groundwave communication systems by predicting the detrimental effect of interference from other users. Application of Neural Networks as a means of optimising the reliability of HF communication systems by predicting the detrimental effect of interference from other users and its variability due to the ionosphere. In particular, the development of a long-term interference prediction model for the HF spectrum was developed.
Mattick, Robert E.; Hennessy, Jacqueline L.
1980-01-01
On September 23, 1977, the U.S. Department of the Interior announced the tentative selection of 136 tracts for Sale No. 49 of oil and gas leases in the Baltimore Canyon Trough on the U.S. Atlantic Continental Shelf and Slope. This report summarizes the geology and petroleum potential of the area. The Baltimore Canyon Trough is an elongate, seaward-opening sedimentary basin filled by as much as 14 km of Mesozoic and Cenozoic sedimentary rocks. The basin first formed under the New Jersey shelf and gradually spread west and south as the area subsided after the rifting that formed the Atlantic basin. Rocks of the Triassic and Jurassic Systems together are more than 8 km thick in a depocenter areally restricted to the northern part of the trough. Basal Jurassic rocks are apparently nonmarine sedimentary rocks bedded with evaporite deposits. Direct evidence that some salt is in the basal Jurassic section comes from the Houston Oil and Minerals 676-1 well, which penetrated salt at a depth of about 3.8 km. During the Middle and Late Jurassic, more open marine conditions prevailed than in the Early Jurassic, and carbonate banks and reefs formed discontinuously along the seaward side of the shelf. Sand flats likely occupied the central part of the shelf, and these probably graded shoreward into nonmarine red beds that accumulated in a bordering coastal plain. Thick nonmarine sands and silty shales of Late Jurassic age were deposited in what is now the nearshore and midshelf area. These sedimentary rocks probably grade into thick marine carbonate rocks near the present shelf edge. During the Cretaceous, less sediment accumulated (about 4 km) than during the Jurassic, and most was deposited during Early Cretaceous time. The Cretaceous units show two main trends through time-a diminishing rate of sediment accumulation and an increase in marine character of sediments. During the Middle and Late Cretaceous, calcareous sand and mud filled the basin, buried the shelf-edge reefs and later spilled across the reefs into the oceanic basin as worldwide sea level reached a maximum. Cenozoic deposits are spread over the present shelf and adjacent Coastal Plain in overlapping sheets of marine and nonmarine sediment. The maximum thickness (1.5 km) is along the outer part of the present shelf. Major tectonic deformation in the Baltimore Canyon Trough area appears to have terminated near the end of the Early Cretaceous, when at least one large mafic intrusion (Great Stone dome) was emplaced. Upper Cretaceous sedimentary rocks are arched above older uplifted fault blocks near the shelf edge; this arching may be the result of draping due to differential compaction or, perhaps, minor movement of the fault blocks during Late Cretaceous time. The dominance of terrestrial over marine-derived organic matter in sediment samples from the COST No. B-2 well indicates that economic amounts of liquid petroleum hydrocarbons were probably not generated in the area but suggests a high potential for generation of wet or dry gas. Supporting evidence for the presence of natural-gas deposits on the slope comes from AMCOR 6021, the upper 305 m of which penetrated sediments that contained methane, ethane, and propane. Texaco, Inc., has announced that its 598-1 well yielded nearly 479,000 m s of natural gas per day from two zones during early testing. Further indication of possible gas deposits comes from analyzing the amplitude (bright spots) of seismic data. Geochemical studies of the COST No. B-2 well have shown that the shelf area of the Baltimore Canyon Trough has a relatively low geothermal gradient today and that it apparently has had a gradient as low or even lower throughout the Cretaceous to Holocene. A controversy exists concerning the maturity of the basal sediments penetrated by the COST No. B-2 well. Although significant amounts of gaseous hydrocarbons may have been generated, large amounts of liquid petroleum hydrocarbons probably hav
Stable interior, showing center aisle, stalls, and feed troughs. View ...
Stable interior, showing center aisle, stalls, and feed troughs. View looking southwest - Fort Hill Farm, Stable, West of Staunton (Roanoke) River between Turkey & Caesar's Runs, Clover, Halifax County, VA
NASA Astrophysics Data System (ADS)
Amina, Benabderrahmane; Miloud, Aminallah; Samir, Laouedj; Abdelylah, Benazza; Solano, J. P.
2016-10-01
In this paper, we present a three dimensional numerical investigation of heat transfer in a parabolic trough collector receiver with longitudinal fins using different kinds of nanofluid, with an operational temperature of 573 K and nanoparticle concentration of 1% in volume. The outer surface of the absorber receives a non-uniform heat flux, which is obtained by using the Monte Carlo ray tracing technique. The numerical results are contrasted with empirical results available in the open literature. A significant improvement of heat transfer is derived when the Reynolds number varies in the range 2.57×104 ≤ Re ≤ 2.57×105, the tube-side Nusselt number increases from 1.3 to 1.8 times, also the metallic nanoparticles improve heat transfer greatly than other nanoparticles, combining both mechanisms provides better heat transfer and higher thermo-hydraulic performance.
Concentrating Solar Power Projects | Concentrating Solar Power | NREL
construction, or under development. CSP technologies include parabolic trough, linear Fresnel reflector, power Technology-listing by parabolic trough, linear Fresnel reflector, power tower, or dish/engine systems Status
NASA Astrophysics Data System (ADS)
Tu, Yoko; Heki, Kosuke
2017-09-01
We studied 38 slow slip events (SSEs) in 1997-2016 beneath the Iriomote Island, southwestern Ryukyu Arc, Japan, using continuous Global Navigation Satellite Systems data. These SSEs occur biannually on the same fault patch at a depth of 30 km on the subducting Philippine Sea Plate slab with average moment magnitudes (
Surface expression of the Chicxulub crater
Pope, K O; Ocampo, A C; Kinsland, G L; Smith, R
1996-06-01
Analyses of geomorphic, soil, and topographic data from the northern Yucatan Peninsula, Mexico, confirm that the buried Chicxulub impact crater has a distinct surface expression and that carbonate sedimentation throughout the Cenozoic has been influenced by the crater. Late Tertiary sedimentation was mostly restricted to the region within the buried crater, and a semicircular moat existed until at least Pliocene time. The topographic expression of the crater is a series of features concentric with the crater. The most prominent is an approximately 83-km-radius trough or moat containing sinkholes (the Cenote ring). Early Tertiary surfaces rise abruptly outside the moat and form a stepped topography with an outer trough and ridge crest at radii of approximately 103 and approximately 129 km, respectively. Two discontinuous troughs lie within the moat at radii of approximately 41 and approximately 62 km. The low ridge between the inner troughs corresponds to the buried peak ring. The moat corresponds to the outer edge of the crater floor demarcated by a major ring fault. The outer trough and the approximately 62-km-radius inner trough also mark buried ring faults. The ridge crest corresponds to the topographic rim of the crater as modified by postimpact processes. These interpretations support previous findings that the principal impact basin has a diameter of approximately 180 km, but concentric, low-relief slumping extends well beyond this diameter and the eroded crater rim may extend to a diameter of approximately 260 km.
NASA Astrophysics Data System (ADS)
Wang, Long; Yu, Min; Liu, Yan; Liu, Jiwen; Wu, Yonghua; Li, Li; Liu, Jihua; Wang, Min; Zhang, Xiao-Hua
2018-04-01
As an ideal place to study back-arc basins and hydrothermal eco-system, Okinawa Trough has attracted the interests of scientists for decades. However, there are still no in-depth studies targeting the bacterial community of the seafloor sediments and hydrothermal deposits in Okinawa Trough. In the present study, we reported the bacterial community of the surface deposits of a newly found hydrothermal field in the southern Okinawa Trough, and the horizontal and vertical variation of bacterial communities in the sediments of the northern Okinawa Trough. The hydrothermal deposits had a relatively high 16S rRNA gene abundance but low bacterial richness and diversity. Epsilonproteobacteria and Bacteroidetes were predominant in hydrothermal deposits whereas Deltaproteobacteria, Gammaproteobacteria and Chloroflexi were abundant across all samples. The bacterial distribution in the seafloor of Okinawa Trough was significantly correlated to the content of total nitrogen, and had consistent relationship with total carbon. Gradual changes of sulfur-oxidizing bacteria were found with the distance away from hydrothermal fields, while the hydrothermal activity did not influence the distribution of the major clades of sulfate-reducing bacteria. Higher abundance of the sulfur cycle related genes (aprA and dsrB), and lower abundance of the bacterial ammonia-oxidizing related gene (amoA) were quantified in hydrothermal deposits. In addition, the present study also compared the inter-field variation of Epsilonproteobacteria among multi-types of hydrothermal vents, revealing that the proportion and diversity of this clade were quite various.
NASA Astrophysics Data System (ADS)
Klages, J. P.; Hillenbrand, C. D.; Kuhn, G.; Smith, J. A.; Graham, A. G. C.; Nitsche, F. O.; Frederichs, T.; Arndt, J. E.; Gebhardt, C.; Robin, Z.; Uenzelmann-Neben, G.; Gohl, K.; Jernas, P.; Wacker, L.
2017-12-01
In recent years several previously undiscovered grounding-zone wedges (GZWs) have been described within the Abbot-Cosgrove palaeo-ice stream trough on the easternmost Amundsen Sea Embayment shelf. These GZWs document both the Last Glacial Maximum (LGM; 26.5-19 cal. ka BP) grounding-line extent and the subsequent episodic retreat within this trough that neighbors the larger Pine Island-Thwaites trough to the west. Here we combine bathymetric, seismic, and geologic data showing that 1) the grounding line in Abbot Trough did not reach the continental shelf break at any time during the last glacial period, and 2) a prominent stacked GZW constructed from six individual wedges lying upon another was deposited 100 km upstream from the LGM grounding-line position. The available data allow for calculating volumes for most of these individual GZWs and for the entire stack. Sediment cores were recovered seawards from the outermost GZW in the trough, and from the individual wedges of the stacked GZW in order to define the LGM grounding-line extent, and provide minimum grounding-line retreat ages for the respective positions on the stacked GZW. We present implications of a grounded-ice free outer shelf throughout the last glacial period. Furthermore, we assess the significance of the grounding-line stillstand period recorded by the stacked GZW in Abbot Trough for the timing of post-LGM retreat of the West Antarctic Ice Sheet from the Amundsen Sea Embayment shelf.
NASA Astrophysics Data System (ADS)
Jolliff, J.; Jarosz, E.; Penko, A.; Smith, T.
2017-12-01
The "Lafourche Trough" is a mud/silt -dominated, elongate seafloor depression located between transgressive sandy shoals approximately 50 km south of Cocodrie, Louisiana. These irregular bathymetric features are relicts of the abandoned Lafourche delta complex that still have an impact upon coupled sediment-hydrodynamic processes occurring today. Repeated optical and physical oceanographic surveys conducted during the spring of 2015 and winter 2017 reveal persistent bottom nepheloid layers (BNLs) characterized by extreme optical turbidity (beam attenuation 10 m-1, 532 nm). The manifestation and persistence of cohesive sediment BNLs in this area appears to result from a complex interplay between tidal currents, bathymetry, and frontal dynamics along the edge of the Mississippi River plume. Numerical experiments were performed using the Coupled Ocean Atmosphere Mesoscale Prediction System (COAMPS), an integrated air-sea-wave operational forecasting tool, that includes a simplified numerical sediment resuspension and transport scheme in order to simulate the nepheloid layer observations through the trough. The model results suggest that the wave-current bottom boundary layer is a critical factor in BNL development, and thusly, without wave model integration into COAMPS the system struggles to replicate the observations. Future modeling work will need to explore the potential suppression of physical mixing due to density perturbations along the BNL to fluid mud continuum within the bottom boundary layer.
A Retrospective Study of Amitriptyline in Youth with Autism Spectrum Disorders
ERIC Educational Resources Information Center
Bhatti, Irfan; Thome, Andrew; Smith, Patricia Oxler; Cook-Wiens, Galen; Yeh, Hung Wen; Gaffney, Gary R.; Hellings, Jessica A.
2013-01-01
We performed a retrospective chart review of 50 youths with Autism Spectrum Disorder (ASD), prescribed amitriptyline (AMI) for hyperactivity and impulsivity. Data was systematically extracted from 50 outpatient clinic charts, including AMI treatment duration, dose, trough levels and adverse events. Mean age was 9.4 years (4.6-17.9); 40 were males…
Landslides in Valles Marineris, Mars
NASA Technical Reports Server (NTRS)
Lucchitta, B. K.
1979-01-01
The morphology of the landslides in the Martian equatorial troughs, the geologic structure of the troughs, the time of emplacement, the similarity to terrestrial landslides, and the origin and mechanism of transport are analyzed. About 35 large landslides well-resolved on Viking images were examined, and it is found that the major landslides cover 31,000 sq km of the trough floors, and individual slides range in area from 40 to 7000 sq km. The morphologic variations of the landslides can be attributed mainly to their degree of confinement on trough floors. Many prominent landslides appear to be of similar age and were emplaced after a major faulting that dropped the trough floors. Most sliding occurred after the created scarps were dissected into spurs, gullies, and tributary canyons. Emplacement of the landslides approximately coincided with a late episode of major eruptive activity of the Tharsis volcanoes, and it is suggested that the slides may have originated as gigantic mudflows with slump blocks at their heads. The large size of many landslides is due to the fault scarps as high as 7 km on which they formed in the absence of vigorous fluvial erosion. The landslides suggest that Mars is earthlike in some respects, which may be important for further evaluations.
Morphology-dependent water budgets and nutrient fluxes in arctic thaw ponds
Koch, Joshua C.; Gurney, Kirsty; Wipfli, Mark S.
2014-01-01
Thaw ponds on the Arctic Coastal Plain of Alaska are productive ecosystems, providing habitat and food resources for many fish and bird species. Permafrost in this region creates unique pond morphologies: deep troughs, shallow low-centred polygons (LCPs) and larger coalescent ponds. By monitoring seasonal trends in pond volume and chemistry, we evaluated whether pond morphology and size affect water temperature and desiccation, and nitrogen (N) and phosphorus (P) fluxes. Evaporation was the largest early-summer water flux in all pond types. LCPs dried quickly and displayed high early-summer nutrient concentrations and losses. Troughs consistently received solute-rich subsurface inflows, which accounted for 12 to 42 per cent of their volume and may explain higher P in the troughs. N to P ratios increased and ammonium concentrations decreased with pond volume, suggesting that P and inorganic N availability may limit ecosystem productivity in older, larger ponds. Arctic summer temperatures will likely increase in the future, which may accelerate mid-summer desiccation. Given their morphology, troughs may remain wet, become warmer and derive greater nutrient loads from their thawing banks. Overall, seasonal- to decadal-scale warming may increase ecosystem productivity in troughs relative to other Arctic Coastal Plain ponds.
NASA Astrophysics Data System (ADS)
Lockwood, M.
1981-06-01
Observations of the amplitudes and Doppler shifts of received HF radio waves are compared with model predictions made using a two-dimensional ray-tracing program. The signals are propagated over a sub-auroral path, which is shown to lie along the latitudes of the mid-latitude trough at times of low geomagnetic activity. Generalizing the predictions to include a simple model of the trough in the density and height of the F2 peak enables the explanation of the anomalous observed diurnal variations. The behavior of received amplitude, Doppler shift, and signal-to-noise ratio as a function of the K sub p index value, the time of day, and the season (in 17 months of continuous recording) is found to agree closely with that predicted using the statistical position of the trough as deduced from 8 years of Alouette satellite soundings. The variation in the times of the observation of large signal amplitudes with the K sub p value and the complete absence of such amplitudes when it exceeds 2.75 are two features that implicate the trough in these effects.
Islam, Rafiqul
2013-07-01
Today's bioanalytical CROs face increasing global competition, highly variable demand, high fixed costs, pricing pressure, and increasing demand for quality and speed. Most bioanalytical laboratories have responded to these challenges by implementing automation and by implementing process improvement methodologies (e.g., Six Sigma). These solutions have not resulted in a significant improvement in productivity and profitability since none of them are able to predict the upturn or downturn in demand. High volatility of demand causes long lead times and high costs during peak demand and poor productivity during trough demand. Most bioanalytical laboratories lack the tools to align supply efficiently to meet changing demand. In this paper, sales and operation planning (S&OP) has been investigated as a tool to balance supply and demand. The S&OP process, when executed effectively, can be the single greatest determinant of profitability for a bioanalytical business.
Gibson, Ashley; Kaplan, Sheldon L; Vallejo, Jesus G
2018-04-26
Coagulase-negative staphylococci (CoNS) are a common cause of pediatric ventricular shunt infections. The Infectious Diseases Society of America recommends vancomycin serum troughs of 15-20 µg/mL when treating CoNS shunt infections in adult patients. We report a series of pediatric cases of CoNS shunt infections in which clinical cure was obtained with troughs < 15 µg/mL. These findings question the relevance of this recommendation in pediatric patients. © 2018 S. Karger AG, Basel.
A meta-analysis of clinical electro-oculography values.
Constable, Paul A; Ngo, David; Quinn, Stephen; Thompson, Dorothy A
2017-12-01
The aim of the meta-analysis was to derive a range of mean normal clinical electrooculogram (EOG) values from a systematic review of published EOG studies that followed the guidelines of the ISCEV standard for clinical electro-oculography. A systematic literature review was performed using four relevant databases limited to peer-reviewed articles in English between 1967 and February 2017. Studies reporting clinical EOG or FO normal values were included when the report used a standard 30° horizontal saccade, a retinal luminance of between 100 and 250 cd m -2 , and had > 10 subjects in their normative values. The search identified 1145 articles after duplicates were removed with subsequent screening of the abstracts excluding a further 1098, resulting in 47 full-text articles that were then assessed by the author (PC) with a final nine articles meeting the inclusion criteria. An overall effect estimate using inverse variance-weighted meta-analysis was performed to estimate the mean values for the light peak/dark trough ratio (LP:DT ratio) (dilated and undilated), the time to the LP, the amplitude of the LP, dark trough (DT) and the fast oscillation (FO) peak-to-trough ratio from the included studies. The mean dilated LP:DT ratio was 2.35 (95% CI 2.28-2.42); undilated LP:DT ratio was 2.37 (95% CI 2.28-2.45); LP amplitude was 835 (95% CI 631-1039) µV and the mean time to the LP being 8.2 (95% CI 7.7-8.7) min. The mean DT amplitude was 358 (95% CI 292-424) µV, and the mean FO peak-to-trough ratio was 1.13 (95% CI 1.11-1.16). The results of the LP/DT ratio are drawn from studies with a mean ± standard deviation (SD) age of 34.08 ± 12.93 years for dilated and 33.65 ± 12.28 years for undilated LP/DT ratios. The meta-analysis of EOG studies has generated a reference range of normal mean values for clinicians to refer to when using the ISCEV clinical EOG. It provides a potential method to generate similar data sets from published normal values in related visual electrophysiology tests.
3D Porosity Estimation of the Nankai Trough Sediments from Core-log-seismic Integration
NASA Astrophysics Data System (ADS)
Park, J. O.
2015-12-01
The Nankai Trough off southwest Japan is one of the best subduction-zone to study megathrust earthquake fault. Historic, great megathrust earthquakes with a recurrence interval of 100-200 yr have generated strong motion and large tsunamis along the Nankai Trough subduction zone. At the Nankai Trough margin, the Philippine Sea Plate (PSP) is being subducted beneath the Eurasian Plate to the northwest at a convergence rate ~4 cm/yr. The Shikoku Basin, the northern part of the PSP, is estimated to have opened between 25 and 15 Ma by backarc spreading of the Izu-Bonin arc. The >100-km-wide Nankai accretionary wedge, which has developed landward of the trench since the Miocene, mainly consists of offscraped and underplated materials from the trough-fill turbidites and the Shikoku Basin hemipelagic sediments. Particularly, physical properties of the incoming hemipelagic sediments may be critical for seismogenic behavior of the megathrust fault. We have carried out core-log-seismic integration (CLSI) to estimate 3D acoustic impedance and porosity for the incoming sediments in the Nankai Trough. For the CLSI, we used 3D seismic reflection data, P-wave velocity and density data obtained during IODP (Integrated Ocean Drilling Program) Expeditions 322 and 333. We computed acoustic impedance depth profiles for the IODP drilling sites from P-wave velocity and density data. We constructed seismic convolution models with the acoustic impedance profiles and a source wavelet which is extracted from the seismic data, adjusting the seismic models to observed seismic traces with inversion method. As a result, we obtained 3D acoustic impedance volume and then converted it to 3D porosity volume. In general, the 3D porosities show decrease with depth. We found a porosity anomaly zone with alteration of high and low porosities seaward of the trough axis. In this talk, we will show detailed 3D porosity of the incoming sediments, and present implications of the porosity anomaly zone for the megathrust fault behavior.
NASA Astrophysics Data System (ADS)
van Wijk, Esmee M.; Rintoul, Stephen R.; Ronai, Belinda M.; Williams, Guy D.
2010-05-01
The fine-scale circulation around the Heard and McDonald Islands and through the Fawn Trough, Kerguelen Plateau, is described using data from three high-resolution CTD sections, Argo floats and satellite maps of chlorophyll a, sea surface temperature (SST) and absolute sea surface height (SSH). We confirm that the Polar Front (PF) is split into two branches over the Kerguelen Plateau, with the NPF crossing the north-eastern limits of our survey carrying 25 Sv to the southeast. The SPF was associated with a strong eastward-flowing jet carrying 12 Sv of baroclinic transport through the deepest part of Fawn Trough (relative to the bottom). As the section was terminated midway through the trough this estimate is very likely to be a lower bound for the total transport. We demonstrate that the SPF contributes to the Fawn Trough Current identified by previous studies. After exiting the Fawn Trough, the SPF crossed Chun Spur and continued as a strong north-westward flowing jet along the eastern flank of the Kerguelen Plateau before turning offshore between 50°S and 51.5°S. Measured bottom water temperatures suggest a deep water connection between the northern and southern parts of the eastern Kerguelen Plateau indicating that the deep western boundary current continues at least as far north as 50.5°S. Analysis of satellite altimetry derived SSH streamlines demonstrates a southward shift of both the northern and southern branches of the Polar Front from 1994 to 2004. In the direct vicinity of the Heard and McDonald islands, cool waters of southern origin flow along the Heard Island slope and through the Eastern Trough bringing cold Winter Water (WW) onto the plateau. Complex topography funnels flow through canyons, deepens the mixed layer and increases productivity, resulting in this area being the preferred foraging region for a number of satellite-tracked land-based predators.
Balancing vancomycin efficacy and nephrotoxicity: should we be aiming for trough or AUC/MIC?
Patel, Karisma; Crumby, Ashley S; Maples, Holly D
2015-04-01
Sixty years later, the question that still remains is how to appropriately utilize vancomycin in the pediatric population. The Infectious Diseases Society of America published guidelines in 2011 that provide guidance for dosing and monitoring of vancomycin in adults and pediatrics. However, goal vancomycin trough concentrations of 15-20 μg/mL for invasive infections caused by methicillin-resistant Staphylococcus aureus were based primarily on adult pharmacokinetic and pharmacodynamic data that achieved an area under the curve to minimum inhibitory concentration ratio (AUC/MIC) of ≥400. Recent pediatric literature shows that vancomycin trough concentrations needed to achieve the target AUC/MIC are different than the adult goal troughs cited in the guidelines. This paper addresses several thoughts, including the role of vancomycin AUC/MIC in dosing strategies and safety monitoring, consistency in laboratory reporting, and future directions for calculating AUC/MIC in pediatrics.
Kappel, William M.; Teece, Mark A.
2007-01-01
Introduction The U.S. Geological Survey, in cooperation with the Onondaga Lake Partnership and Onondaga Environmental Institute, has been studying the hydrogeology of the Onondaga Trough since 2002 to determine the movement and concentration of naturally occurring brine in the glacial valley-fill aquifer. Numerous shallow and deep test holes have been drilled to determine the glacial and water-quality stratigraphy in the Onondaga Trough. Organic materials were recovered from the Onondaga Creek, Ninemile Creek, and Harbor Brook valleys, and from lakebed sediments in Onondaga Lake (fig. 1) and age-dated with carbon-isotope analysis techniques. This report summarizes the carbon-isotope data collected from 1996 through 2006 in the Onondaga Trough. The results of these analyses provide a means to understand the deglaciation of the watershed and the development of the watershed from barren glacial sediment to a forested ecosystem.
Formations in Context (or, what is it?)
2018-04-02
This image from NASA's Mars Reconnaissance Orbiter is a close-up of a trough, along with channels draining into the depression. Some HiRISE images show strange-looking formations. Sometimes it helps to look at Context Camera images to understand the circumstances of a scene -- like this cutout from CTX 033783_1509 -- which here shows an impact crater with a central peak, and a collapse depression with concentric troughs just north of that peak. On the floor of the trough is some grooved material that we typically see in middle latitude regions where there has been glacial flow. These depressions with concentric troughs exist elsewhere on Mars, and their origins remain a matter of debate. NB: The Context Camera is another instrument onboard MRO, and it has a larger viewing angle than HiRISE, but less resolution capability than our camera. https://photojournal.jpl.nasa.gov/catalog/PIA22348
Oblique H.F. radiowave propagation in the main trough region of the ionosphere
NASA Astrophysics Data System (ADS)
Lockwood, M.; Mitchell, V. B.
1980-12-01
The propagation of 7.335 MHz, CW signals over a 5212 km subauroral, west-east path is studied. Measurements and semiempirical predictions are made of the amplitude distributions and Doppler shifts of the received signals. The observed amplitude distribution is fitted with a numerical fading model, yielding the power losses suffered by the signals during propagation via the predominating modes. The mid-latitude trough in the F2 peak ionization density is predicted by a statistical model to be at the latitudes of this path at these times and at low K sub p values; a sharp cut-off in low-power losses at a mean K sub p of 2.75 strongly implicates the trough in the propagation of these signals. It is shown that a simple extension of this model to allow for the trough can reproduce the form of the observed diurnal variation.
Huang, Wan-Ru; Wang, Sheng-Hsiang; Yen, Ming-Cheng; Lin, Neng-Huei; Promchote, Parichart
2016-09-16
During March and April, widespread burning occurs across farmlands in Indochina in preparation for planting at the monsoon onset. The resultant aerosols impact the air quality downwind. In this study, we investigate the climatic aspect of the interannual variation of springtime biomass burning in Indochina and its correlation with air quality at Mt. Lulin in Taiwan using long-term (2005-2015) satellite and global reanalysis data. Based on empirical orthogonal function (EOF) analysis, we find that the biomass burning activities vary with two geographical regions: northern Indochina (the primary EOF mode) and southern Indochina (the secondary EOF mode). We determine that the variation of biomass burning over northern Indochina is significantly related with the change in aerosol concentrations at Mt. Lulin. This occurs following the change in the so-called India-Burma Trough in the lower and middle troposphere. When the India-Burma Trough is intensified, a stronger northwesterly wind (to the west of the trough) transports the dryer air from higher latitude into northern Indochina, and this promotes local biomass burning activities. The increase in upward motion to the east of the intensified India-Burma Trough lifts the aerosols, which are transported toward Taiwan by the increased low-level westerly jet. Further diagnoses revealed the connection between the India-Burma Trough and the South Asian jet's wave train pattern as well as the previous winter's El Niño - Southern Oscillation phase. This information highlights the role of the India-Burma Trough in modulating northern Indochina biomass burning and possibly predicting aerosol transport to East Asia on the interannual time scale.
Beauvais, Wendy; Gart, Elena V; Bean, Melissa; Blanco, Anthony; Wilsey, Jennifer; McWhinney, Kallie; Bryan, Laura; Krath, Mary; Yang, Ching-Yuan; Manriquez Alvarez, Diego; Paudyal, Sushil; Bryan, Kelsey; Stewart, Samantha; Cook, Peter W; Lahodny, Glenn; Baumgarten, Karina; Gautam, Raju; Nightingale, Kendra; Lawhon, Sara D; Pinedo, Pablo; Ivanek, Renata
2018-01-01
Escherichia coli O157:H7 fecal shedding in feedlot cattle is common and is a public health concern due to the risk of foodborne transmission that can result in severe, or even fatal, disease in people. Despite a large body of research, few practical and cost-effective farm-level interventions have been identified. In this study, a randomized controlled trial was conducted to assess the effect of reducing the level of water in automatically refilling water-troughs on fecal shedding of E. coli O157:H7 in feedlot cattle. Pens in a feedlot in the Texas Panhandle were randomly allocated as control (total number: 17) or intervention (total number: 18) pens. Fecal samples (2,759 in total) were collected both at baseline and three weeks after the intervention, and tested for the presence of E. coli O157:H7 using immunomagnetic bead separation and selective culture. There was a strong statistical association between sampling date and the likelihood of a fecal sample testing positive for E. coli O157:H7. Pen was also a strong predictor of fecal prevalence. Despite accounting for this high level of clustering, a statistically significant association between reduced water levels in the trough and increased prevalence of E. coli O157:H7 in the feces was observed (Odds Ratio = 1.6; 95% Confidence Interval: 1.2-2.0; Likelihood Ratio Test: p = 0.02). This is the first time that such an association has been reported, and suggests that increasing water-trough levels may be effective in reducing shedding of E. coli O157:H7 in cattle feces, although further work would be needed to test this hypothesis. Controlling E. coli O157:H7 fecal shedding at the pre-harvest level may lead to a reduced burden of human foodborne illness attributed to this pathogen in beef.
Gart, Elena V.; Bean, Melissa; Blanco, Anthony; Wilsey, Jennifer; McWhinney, Kallie; Bryan, Laura; Krath, Mary; Yang, Ching-Yuan; Manriquez Alvarez, Diego; Paudyal, Sushil; Bryan, Kelsey; Stewart, Samantha; Cook, Peter W.; Lahodny, Glenn; Baumgarten, Karina; Gautam, Raju; Nightingale, Kendra; Lawhon, Sara D.; Pinedo, Pablo; Ivanek, Renata
2018-01-01
Escherichia coli O157:H7 fecal shedding in feedlot cattle is common and is a public health concern due to the risk of foodborne transmission that can result in severe, or even fatal, disease in people. Despite a large body of research, few practical and cost-effective farm-level interventions have been identified. In this study, a randomized controlled trial was conducted to assess the effect of reducing the level of water in automatically refilling water-troughs on fecal shedding of E. coli O157:H7 in feedlot cattle. Pens in a feedlot in the Texas Panhandle were randomly allocated as control (total number: 17) or intervention (total number: 18) pens. Fecal samples (2,759 in total) were collected both at baseline and three weeks after the intervention, and tested for the presence of E. coli O157:H7 using immunomagnetic bead separation and selective culture. There was a strong statistical association between sampling date and the likelihood of a fecal sample testing positive for E. coli O157:H7. Pen was also a strong predictor of fecal prevalence. Despite accounting for this high level of clustering, a statistically significant association between reduced water levels in the trough and increased prevalence of E. coli O157:H7 in the feces was observed (Odds Ratio = 1.6; 95% Confidence Interval: 1.2–2.0; Likelihood Ratio Test: p = 0.02). This is the first time that such an association has been reported, and suggests that increasing water-trough levels may be effective in reducing shedding of E. coli O157:H7 in cattle feces, although further work would be needed to test this hypothesis. Controlling E. coli O157:H7 fecal shedding at the pre-harvest level may lead to a reduced burden of human foodborne illness attributed to this pathogen in beef. PMID:29414986
Coolidge solar powered irrigation pumping project
NASA Technical Reports Server (NTRS)
Larson, D. L.
1980-01-01
A 150 kW solar thermal electric power plant which includes over 2100 square meters of parabolic trough type collectors and an organic Rankine cycle turbine engine was constructed on an irrigated farm. The plant is interconnected with the electrical utility grid. Operation is providing an evaluation of equipment performance and operating and maintenance requirements as well as the desirability of an on farm location.
Concentrating Solar Power Projects - DEWA CSP Trough Project |
: Parabolic trough Turbine Capacity: Net: 600.0 MW Gross: 600.0 MW Status: Under development Start Year: 2020 Ground: 2018 Start Production: 2020 PPA/Tariff Rate: 7.3 US cents per kWh Participants Developer(s): ACWA
Landslides in Valles Marineris, Mars.
Lucchitta, B.K.
1979-01-01
Large landslides in the Martian equatorial troughs have been investigated with respect to morphology, geologic structure of the troughs, time of emplacement, similarity to terrestrial landslides, and origin and mechanism of transport. The morphologic variations of the landslides can be attributed mainly to their degree of confinement on trough floors. The huge size of many landslides is due to their occurrence on fault scarps that may have attained several kilometers in height in the absence of vigorous fluvial erosion on Mars. The mechanical efficiency of the Martian landslides is high but in accord with predictions from large landslides on earth. -from Author
Optical and mechanical tolerances in hybrid concentrated thermal-PV solar trough.
Diaz, Liliana Ruiz; Cocilovo, Byron; Miles, Alexander; Pan, Wei; Blanche, Pierre-Alexandre; Norwood, Robert A
2018-05-14
Hybrid thermal-PV solar trough collectors combine concentrated photovoltaics and concentrated solar power technology to harvest and store solar energy. In this work, the optical and mechanical requirements for optimal efficiency are analyzed using non-sequential ray tracing techniques. The results are used to generate opto-mechanical tolerances that can be compared to those of traditional solar collectors. We also explore ideas on how to relieve tracking tolerances for single-axis solar collectors. The objective is to establish a basis for tolerances required for the fabrication and manufacturing of hybrid solar trough collectors.
Baby Spider: Growth of a Martian Trough Network
2016-12-20
This image from NASA Mars Reconnaissance Orbiter shows the growth of a branching network of troughs carved by thawing carbon dioxide over the span of three Martian years. This process is believed to also form larger radially patterned channel features known as Martian "spiders." The image is one of three taken by the High Resolution Imaging Science Experiment (HiRISE) camera on NASA's Mars Reconnaissance Orbiter and included in a report on the first detection of such troughs persisting and growing, from one Mars year to the next. An animation is available at http://photojournal.jpl.nasa.gov/catalog/PIA21257
Investigating the reasons of variability in Si IV and C IV broad absorption line troughs of quasars
NASA Astrophysics Data System (ADS)
Stathopoulos, Dimitrios; Lyratzi, Evangelia; Danezis, Emmanuel; Antoniou, Antonios; Tzimeas, Dimitrios
2017-09-01
In this paper we analyze the C IV and Si IV broad absorption troughs of two BALQSOs (J101056.69+355833.3, J114548.38+393746.6) to the individual components they consist of. By analyzing a BAL trough to its components we have the advantage to study the variations of the individual absorbing systems in the line of sight and not just the variations of the whole absorption trough or the variations of selected portions of BAL troughs exhibiting changes. We find that the velocity shifts and FWHMs (Full Width at Half Maximum) of the individual components do not vary between an interval of six years. All variable components show changes in the optical depths at line centers which are manifested as variations in the EW (Equivalent Width) of the components. In both BALQSOs, over corresponding velocities, Si IV has higher incidence of variability than C IV. From our analysis, evidence is in favour of different covering fractions between C IV and Si IV. Finally, although most of our results favour the crossing cloud scenario as the cause of variability, there is also strong piece of evidence indicating changing ionization as the source of variability. Thus, a mixed situation where both physical mechanisms contribute to BAL variability is the most possible scenario.
Takeuchi, Akiko; Shirai, Shinichi; Horiuchi, Kazuhiro; Takahashi, Ikuko; Matsushima, Masaaki; Hirotani, Makoto; Kano, Takahiro; Yabe, Ichiro; Matumoto, Akihisa; Sasaki, Hidenao
2012-01-01
Cyclosporine A (CYA) treatment has been reported to be probably useful for patients with chronic inflammatory demyelinating polyradiculoneuropathy (CIDP) that is resistant to conventional treatment. Although several studies have shown that appropriate area under the concentration-time curve (AUC) monitoring of CYA levels results in improved outcomes for refractory nephrotic syndrome patients, the importance of using AUC analysis for CIDP remains unclear. In this study, we measured both trough and AUC from 0 to 4 h (AUC(0-4 h)) levels of CYA in 2 patients with CIDP and compared the findings for the clinical parameters. On the basis of the CYA dosing recommendations for patients with nephrotic syndrome, we used a CYA concentration of 150 ng/ml for the trough level and an AUC(0-4 h) value of 2,500 ng/(ml·h). Patient 1 showed a significant increase in grip strength and a prolonged remission period. Patient 2 showed improvement in the modified Rankin scale and manual muscle test (MMT) scores. Monitoring both AUC(0-4 h) and trough levels of CYA seems to be a better option than monitoring the trough level alone because it leads to improved estimation of the efficacy and safety of CYA treatment in the case of CIDP patients.
O+ trough zones in the polar cap ionosphere-magnetosphere coupling region
NASA Astrophysics Data System (ADS)
Horwitz, James; Zeng, Wen; Jaafari, Fajer
Regions of low-density troughs in O+ have been observed at 1 RE altitude in the polar cap ionosphere-magnetosphere region by the Thermal Ion Dynamics Experiment(TIDE) on the POLAR spacecraft. In this presentation, the UT Arlington Dynamic Fluid-Kinetic (DyFK) code is employed to investigate the formation of such O+ density troughs. We utilize convection paths of flux tubes in the high-latitude region as prescribed by an empirical convection model with solar wind inputs to track the evolution of ionospheric plasma transport and in particular O+ densities along these tubes with time/space. The flux tubes are subjected to auroral processes of precipitation and wave-driven ion heating when they pass through the auroral oval, which tends to elevate the plasma densities in these tubes. When the F-regions of such tubes traverse locations where the F-region is in darkness, recombination there causes the higher-altitude regions to drain and the densities to decline throughout. Owing to the varying effects of these processes, significant and low trough-like densities at higher altitudes developed along these flux tubes. The modeled densities near 6000 km altitudes will be compared with multiple POLAR passes featuring POLAR/TIDE-measured O+ densities for inside and outside of such trough regions.
Assessment of undiscovered continuous oil and gas resources in the Hanoi Trough, Vietnam, 2017
Schenk, Christopher J.; Tennyson, Marilyn E.; Mercier, Tracey J.; Woodall, Cheryl A.; Le, Phuong A.; Klett, Timothy R.; Finn, Thomas M.; Leathers-Miller, Heidi M.; Gaswirth, Stephanie B.; Marra, Kristen R.
2018-02-13
Using a geology-based assessment methodology, the U.S. Geological Survey estimated mean undiscovered, technically recoverable continuous resources of 52 million barrels of oil and 591 billion cubic feet of gas in the Hanoi Trough of Vietnam.
NASA Astrophysics Data System (ADS)
Li, Wei; Alves, Tiago M.; Wu, Shiguo; Rebesco, Michele; Zhao, Fang; Mi, Lijun; Ma, Benjun
2016-10-01
A giant submarine creep zone exceeding 800 km2 on the continental slope offshore the Dongsha Islands, South China Sea, is investigated using bathymetric and 3D seismic data tied to borehole information. The submarine creep zone is identified as a wide area of seafloor undulations with ridges and troughs. The troughs form NW- and WNW-trending elongated depressions separating distinct seafloor ridges, which are parallel or sub-parallel to the continental slope. The troughs are 0.8-4.7 km-long and 0.4 to 2.1 km-wide. The ridges have wavelengths of 1-4 km and vertical relief of 10-30 m. Slope strata are characterised by the presence of vertically stacked ridges and troughs at different stratigraphic depths, but remaining relatively stationary in their position. The interpreted ridges and troughs are associated with large-scale submarine creep, and the troughs can be divided into three types based on their different internal characters and formation processes. The large-scale listric faults trending downslope below MTD 1 and horizon T0 may be the potential glide planes for the submarine creep movement. High sedimentation rates, local fault activity and the frequent earthquakes recorded on the margin are considered as the main factors controlling the formation of this giant submarine creep zone. Our results are important to the understanding of sediment instability on continental slopes as: a) the interpreted submarine creep is young, or even active at present, and b) areas of creeping may evolve into large-scale slope instabilities, as recorded by similar large-scale events in the past.
Geologic evolution of the Kastel trough and its implications on the Adiyaman oil fields, SE Turkey
DOE Office of Scientific and Technical Information (OSTI.GOV)
Coskun, Bu.
1990-05-01
Oil field developments of the Adiyaman area one of the main oil producing zones in southeast Turkey, have been highly influenced by geologic evolution of the Kastel trough which is situated in front of the suture zone between the Arabian and Anatolian plates. The Upper Cretaceous movements created many paleostructural trends in the Kastel trough where important dolomitic and porous reservoirs exist. The most important tectonic event, which appeared during the Upper Cretaceous movements, is the accumulation of the Kocali-Karadut ophiolitic complex, advancing from the north to the south in the Kastel trough, where heavy materials caused formation of amore » structural model favoring generation and migration and entrapment of oil in the reservoir rocks. Due to the presence of the Kocali-Karadut complex in the Kastel trough the following zones have been distinguished. (1) North Uplift Area. Situated under the allochthonous units, many thrust and reverse faults characterize this zone. The presence of paleohighs, where primary dolomites develop, allows the appearance of some oil fields in the region. This is the main future exploration zone in southeast Turkey. (2) Accumulation Area. Advancing from the north to the south, the allochthonous Kocali-Karadut complex filled the Kastel trough creating a deep graben whose flanks present generally normal faults. (3) Structural Belt. Important paleohighs constitute an exploration trend in this zone where dolomitic and porous carbonates contain actual oil fields. (4) South Accumulation Area. Distant from the Arabian-Anatolian suture zone, regional tectonics and sedimentology show this zone remained deeply buried during geologic time; good source rocks were deposited during the Cretaceous. (5) South Uplift Area. This area corresponds to the northern flank of the huge regional Mardin high in southeast Turkey where new oil fields have been discovered.« less
Gas potential of the Rome Trough in Kentucky: Results of recent Cambrian exploration
DOE Office of Scientific and Technical Information (OSTI.GOV)
Harris, D.C.; Drahovzal, J.A.
1996-09-01
A recent gas discovery in the Rome Trough suggests the need to re-evaluate the deep Cambrian potential of eastern Kentucky. A new phase of Cambrian exploration began in mid-1994 with a new pool discovery by the Carson Associates No. 1 Kazee well in Elliott County, Ky. This well blew out and initially flowed 11 MMcfd of gas from the upper Conasauga Group/Rome Formation at 6,258 to 6,270 feet. After this discovery, a second exploratory well (the Blue Ridge No. 1Greene) was drilled on a separate structure in Elliott County in late 1995. The Blue Ridge well was temporarily abandoned, butmore » had shows of gas and condensate. In early 1996, Carson Associates offset their initial discovery well with the No. 33 Lawson Heirs well. This activity follows a frustrating exploration history in the Rome Trough that is marked by numerous gas and oil shows, but rare commercial production. Only three single-well pools have produced commercial gas from the trough, including the recent Kazee well. Stratigraphic units below the Cambrian-Ordovician Knox Group in the Rome Trough are dramatically thicker than their equivalents on the shelf to the north. The interval in the trough is thought to include rocks as old as Early Cambrian, consisting of a basal sandstone, equivalents of the Shady/Tomstown Dolomite, the Rome Formation, and the Conasauga Formation. Sandstones and fractured shales have been responsible for most of the production to date, but dolostone intervals may also have potential. Limited seismic data indicate possible fan-delta and basin-floor fan deposits that may have reservoir potential.« less
NASA Astrophysics Data System (ADS)
Tomaru, Hitoshi; Fehn, Udo
2015-01-01
Halogen concentrations and 129I/I ratios were determined in pore waters from the Nankai Trough subduction system, collected during IODP Expeditions 315, 316, 322, and 333 along the NanTroSEIZE transect. The transect allowed the first direct comparison of iodine results across an active subduction system, from subducting oceanic sediments to the accretionary prism, and the overlying forearc basin. In contrast to the other halogens (Cl and Br) iodine concentrations show large variations within and among the cores at all sites landward of the trough, I concentrations increase rapidly with depth and reach values several orders of magnitude higher than those in seawater, but are only slightly higher than seawater values at the seaward sites. Methane concentrations follow a similar pattern. Host sediments of the fluids are younger than 7 Ma in all the cores, but the ages of iodine in pore waters at the landward sites reach values beyond 30 Ma. In contrast, iodine seaward of the trough is in isotopic equilibrium with the host sediments, resulting in very similar iodine and sediment ages. The distribution of iodine concentrations and ages indicates that iodine at the landward sites has been transported there in aqueous fluids, probably together with methane, from old formations in the upper plate. The specific fluid pathways potentially were influenced by features such as the megasplay fault in the prism or the décollement. The results demonstrate large-scale transport of fluids carrying iodine and other compounds such as methane from old layers in the upper plate to surface locations landward of the Nankai Trough, while separate, but only local hydrologic processes occur in the marine sediments moving toward the trough.
Structure of the lower crust beneath the Carolina Trough, U.S. Atlantic continental margin
Tréhu, Anne M.; Ballard, A.; Dorman, L.M.; Gettrust, J.F.; Klitgord, Kim D.; Schreiner, A.
1989-01-01
Data from three large-offset seismic profiles provide information on the crustal structure beneath the Carolina trough. The profiles, obtained by the U.S. Geological Survey, the Naval Oceanographic Research Development Agency, and the Scripps Institution of Oceanography in 1985, were oriented parallel to the trough and were located (1) seaward of the East Coast Magnetic Anomaly (ECMA), which is generally thought to represent the boundary between oceanic and continental crust; (2) along the axis of the trough between the ECMA and the hinge zone, which is thought to reflect the landward limit of highly stretched and altered transitional crust; and (3) along the Carolina platform landward of the basement hinge zone on crust thought to have been thinned only slightly during rifting. These data constrain the velocity structure of the lower crust and provide evidence for a thick lens of high-velocity (>7.1 km/s) lower crustal material that extends beneath the Carolina trough and the adjacent ocean basin. This lens reaches a maximum thickness of about 13 km beneath the deepest part of the trough, thins to about 5 km seaward of the ECMA, and is either very thin or absent landward of the hinge zone. It is interpreted to represent material that was underplated beneath and/or intruded into the crust during the late stage of continental rifting and that led to an anomalously thick plutonic layer during the early seafloor spreading phase. These data thus support the recent conclusions of White et al. (1987b) and Mutter et al. (1988) that the initiation of seafloor spreading is attended in many, if not most, cases by the generation of an anomalously large volume of melt.
Ribic, C.A.; Chapman, E.; Fraser, William R.; Lawson, G.L.; Wiebe, P.H.
2008-01-01
A key hypothesis guiding the US Southern Ocean Global Ocean Ecosystems Dynamics (US SO GLOBEC) program is that deep across-shelf troughs facilitate the transport of warm and nutrient-rich waters onto the continental shelf of the Western Antarctic Peninsula, resulting in enhanced winter production and prey availability to top predators. We tested aspects of this hypothesis during austral winter by assessing the distribution of the resident pack-ice top predators in relation to these deep across-shelf troughs and by investigating associations between top predators and their prey. Surveys were conducted July-August 2001 and August-September 2002 in Marguerite Bay, Antarctica, with a focus on the main across-shelf trough in the bay, Marguerite Trough. The common pack-ice seabird species were snow petrel (Pagodroma nivea, 1.2 individuals km-2), Antarctic petrel (Thalassoica antarctica, 0.3 individuals km-2), and Ade??lie penguin (Pygoscelis adeliae, 0.5 individuals km-2). The most common pack-ice pinniped was crabeater seal (Lobodon carcinophagus). During both winters, snow and Antarctic petrels were associated with low sea-ice concentrations independent of Marguerite Trough, while Ade??lie penguins occurred in association with this trough. Krill concentrations, both shallow and deep, also were associated with Ade??lie penguin and snow petrel distributions. During both winters, crabeater seal occurrence was associated with deep krill concentrations and with regions of lower chlorophyll concentration. The area of lower chlorophyll concentrations occurred in an area with complex bathymetry close to land and heavy ice concentrations. Complex or unusual bathymetry via its influence on physical and biological processes appears to be one of the keys to understanding how top predators survive during the winter in this Antarctic region. ?? 2007 Elsevier Ltd. All rights reserved.
Optical analysis of a photovoltaic V-trough system installed in western India.
Maiti, Subarna; Sarmah, Nabin; Bapat, Pratap; Mallick, Tapas K
2012-12-20
The low concentrating photovoltaic (PV) system such as a 2× V-trough system can be a promising choice for enhancing the power output from conventional PV panels with the inclusion of thermal management. This system is more attractive when the reflectors are retrofitted to the stationary PV panels installed in a high aspect ratio in the north-south direction and are tracked 12 times a year manually according to preset angles, thus eliminating the need of diurnal expensive tracking. In the present analysis, a V-trough system facing exactly the south direction is considered, where the tilt angle of the PV panels' row is kept constant at 18.34°. The system is installed on the terrace of CSIR-Central Salt and Marine Chemicals Research Institute in Bhavnagar, Gujarat, India (21.47 N, 71.15 E). The dimension of the entire PV system is 9.64 m×0.55 m. The V-troughs made of anodized aluminum reflectors (70% specular reflectivity) had the same dimensions. An in-house developed; experimentally validated Monte Carlo ray-trace model was used to study the effect of the angular variation of the reflectors throughout a year for the present assembly. Results of the ray trace for the optimized angles showed the maximum simulated optical efficiency to be 85.9%. The spatial distribution of solar intensity over the 0.55 m dimension of the PV panel due to the V-trough reflectors was also studied for the optimized days in periods that included solstices and equinoxes. The measured solar intensity profiles with and without the V-trough system were used to calculate the actual optical efficiencies for several sunny days in the year, and results were validated with the simulated efficiencies within an average error limit of 10%.
Tseng, Sheng-Hsuan; Lim, Chuan Poh; Chen, Qi; Tang, Cheng Cai; Kong, Sing Teang; Ho, Paul Chi-Lui
2018-04-01
Bacterial sepsis is a major cause of morbidity and mortality in neonates, especially those involving methicillin-resistant Staphylococcus aureus (MRSA). Guidelines by the Infectious Diseases Society of America recommend the vancomycin 24-h area under the concentration-time curve to MIC ratio (AUC 24 /MIC) of >400 as the best predictor of successful treatment against MRSA infections when the MIC is ≤1 mg/liter. The relationship between steady-state vancomycin trough concentrations and AUC 24 values (mg·h/liter) has not been studied in an Asian neonatal population. We conducted a retrospective chart review in Singapore hospitals and collected patient characteristics and therapeutic drug monitoring data from neonates on vancomycin therapy over a 5-year period. A one-compartment population pharmacokinetic model was built from the collected data, internally validated, and then used to assess the relationship between steady-state trough concentrations and AUC 24 A Monte Carlo simulation sensitivity analysis was also conducted. A total of 76 neonates with 429 vancomycin concentrations were included for analysis. Median (interquartile range) was 30 weeks (28 to 36 weeks) for postmenstrual age (PMA) and 1,043 g (811 to 1,919 g) for weight at the initiation of treatment. Vancomycin clearance was predicted by weight, PMA, and serum creatinine. For MRSA isolates with a vancomycin MIC of ≤1, our major finding was that the minimum steady-state trough concentration range predictive of achieving an AUC 24 /MIC of >400 was 8 to 8.9 mg/liter. Steady-state troughs within 15 to 20 mg/liter are unlikely to be necessary to achieve an AUC 24 /MIC of >400, whereas troughs within 10 to 14.9 mg/liter may be more appropriate. Copyright © 2018 American Society for Microbiology.
Spatial patterns of cyanobacterial mat growth on sand ripples
NASA Astrophysics Data System (ADS)
Mariotti, G.; Klepac-Ceraj, V.; Perron, J. T.; Bosak, T.
2016-02-01
Photosynthetic microbial mats produce organic matter, cycle nutrients, bind pollutants and stabilize sediment in sandy marine environments. Here, we investigate the influence of bedforms and wave motion on the growth rate, composition and spatial variability of microbial mats by growing cyanobacterial mats on a rippled bed of carbonate sand in a wave tank. The tank was forced with an oscillatory flow with velocities below the threshold for sediment motion yet able to induce a porewater flow within the sediment. Different spatial patterns developed in mats depending on the initial biochemistry of the water medium. When growing in a medium rich in nitrogen, phosphorous and micronutrients, mats grew faster on ripple troughs than on ripple crests. After two months, mats covered the bed surface uniformly, and the microbial communities on the crests and in the troughs had similar compositions. Differences in bed shear stress and nutrient availability between crests and troughs were not able to explain the faster growth in the troughs. We hypothesize that this growth pattern is due to a "strainer" effect, i.e. the suspended bacteria from the inoculum were preferentially delivered to troughs by the wave-induced porewater flow. In the experiments initiated in a medium previously used up by a microbial mat and thus depleted in nutrients, mats grew preferentially on the ripple crests. This spatial pattern persisted for nearly two years, and the microbial composition on troughs and crests was different. We attribute this pattern to the upwelling of porewater in the crests, which increased the delivery of nutrients from sediment to the cyanobacteria on the bed surface. Thus, the macroscopic patterns formed by photosynthetic microbial mats on sand ripples may be used to infer whether mats are nutrient-limited and whether they are recently colonized or older than a month.
Morcos, Peter N; Nueesch, Eveline; Jaminion, Felix; Guerini, Elena; Hsu, Joy C; Bordogna, Walter; Balas, Bogdana; Mercier, Francois
2018-05-10
Alectinib is a selective and potent anaplastic lymphoma kinase (ALK) inhibitor that is active in the central nervous system (CNS). Alectinib demonstrated robust efficacy in a pooled analysis of two single-arm, open-label phase II studies (NP28673, NCT01801111; NP28761, NCT01871805) in crizotinib-resistant ALK-positive non-small-cell lung cancer (NSCLC): median overall survival (OS) 29.1 months (95% confidence interval [CI]: 21.3-39.0) for alectinib 600 mg twice daily (BID). We investigated exposure-response relationships from final pooled phase II OS and safety data to assess alectinib dose selection. A semi-parametric Cox proportional hazards model analyzed relationships between individual median observed steady-state trough concentrations (C trough,ss ) for combined exposure of alectinib and its major metabolite (M4), baseline covariates (demographics and disease characteristics) and OS. Univariate logistic regression analysis analyzed relationships between C trough,ss and incidence of adverse events (AEs: serious and Grade ≥ 3). Overall, 92% of patients (n = 207/225) had C trough,ss data and were included in the analysis. No statistically significant relationship was found between C trough,ss and OS following alectinib treatment. The only baseline covariates that statistically influenced OS were baseline tumor size and prior crizotinib treatment duration. Larger baseline tumor size and shorter prior crizotinib treatment were both associated with shorter OS. Logistic regression confirmed no significant relationship between C trough,ss and AEs. Alectinib 600 mg BID provides systemic exposures at plateau of response for OS while maintaining a well-tolerated safety profile. This analysis confirms alectinib 600 mg BID as the recommended global dose for patients with crizotinib-resistant ALK-positive NSCLC.
NASA Astrophysics Data System (ADS)
Lantzsch, Hendrik; Hanebuth, Till J. J.; Horry, Jan; Grave, Marina; Rebesco, Michele; Schwenk, Tilmann
2017-10-01
High-resolution sediment echosounder data combined with radiocarbon-dated sediment cores allowed us to reconstruct the Late Quaternary stratigraphic architecture of the Kveithola Trough and surrounding Spitsbergenbanken. The deposits display the successive deglacial retreat of the Svalbard-Barents Sea Ice Sheet. Basal subglacial till indicates that the grounded ice sheet covered both bank and trough during the Late Weichselian. A glaciomarine blanket inside the trough coinciding with laminated plumites on the bank formed during the initial ice-melting phase from at least 16.1 to 13.5 cal ka BP in close proximity to the ice margin. After the establishment of open-marine conditions at around 13.5 cal ka BP, a sediment drift developed in the confined setting of the Kveithola Trough, contemporary with crudely laminated mud, an overlying lag deposit, and modern bioclastic-rich sand on Spitsbergenbanken. The Kveithola Drift shows a remarkable grain-size coarsening from the moat towards the southern flank of the trough. This trend contradicts the concept of a separated drift (which would imply coarser grain sizes in proximity of the moat) and indicates that the southern bank is the main sediment source for the coarse material building up the Kveithola Drift. This depocenter represents, therefore, a yet undescribed combination of off-bank wedge and confined drift. Although the deposits inside Kveithola Trough and on Spitsbergenbanken display different depocenter geometries, time-equivalent grain-size changes imply a region-wide sediment-dynamic connection. We thus relate a phase of coarsest sediment supply (8.8-6.3 cal ka BP) to an increase in bottom current strength, which might be related to a stronger Atlantic Water inflow from the Southeast across the bank leading to winnowing and off-bank export of sandy sediments.
Sampling procedures for throughfall monitoring: A simulation study
NASA Astrophysics Data System (ADS)
Zimmermann, Beate; Zimmermann, Alexander; Lark, Richard Murray; Elsenbeer, Helmut
2010-01-01
What is the most appropriate sampling scheme to estimate event-based average throughfall? A satisfactory answer to this seemingly simple question has yet to be found, a failure which we attribute to previous efforts' dependence on empirical studies. Here we try to answer this question by simulating stochastic throughfall fields based on parameters for statistical models of large monitoring data sets. We subsequently sampled these fields with different sampling designs and variable sample supports. We evaluated the performance of a particular sampling scheme with respect to the uncertainty of possible estimated means of throughfall volumes. Even for a relative error limit of 20%, an impractically large number of small, funnel-type collectors would be required to estimate mean throughfall, particularly for small events. While stratification of the target area is not superior to simple random sampling, cluster random sampling involves the risk of being less efficient. A larger sample support, e.g., the use of trough-type collectors, considerably reduces the necessary sample sizes and eliminates the sensitivity of the mean to outliers. Since the gain in time associated with the manual handling of troughs versus funnels depends on the local precipitation regime, the employment of automatically recording clusters of long troughs emerges as the most promising sampling scheme. Even so, a relative error of less than 5% appears out of reach for throughfall under heterogeneous canopies. We therefore suspect a considerable uncertainty of input parameters for interception models derived from measured throughfall, in particular, for those requiring data of small throughfall events.
NASA Astrophysics Data System (ADS)
Yu, Haiyan; Fan, Jiulun
2017-12-01
Local thresholding methods for uneven lighting image segmentation always have the limitations that they are very sensitive to noise injection and that the performance relies largely upon the choice of the initial window size. This paper proposes a novel algorithm for segmenting uneven lighting images with strong noise injection based on non-local spatial information and intuitionistic fuzzy theory. We regard an image as a gray wave in three-dimensional space, which is composed of many peaks and troughs, and these peaks and troughs can divide the image into many local sub-regions in different directions. Our algorithm computes the relative characteristic of each pixel located in the corresponding sub-region based on fuzzy membership function and uses it to replace its absolute characteristic (its gray level) to reduce the influence of uneven light on image segmentation. At the same time, the non-local adaptive spatial constraints of pixels are introduced to avoid noise interference with the search of local sub-regions and the computation of local characteristics. Moreover, edge information is also taken into account to avoid false peak and trough labeling. Finally, a global method based on intuitionistic fuzzy entropy is employed on the wave transformation image to obtain the segmented result. Experiments on several test images show that the proposed method has excellent capability of decreasing the influence of uneven illumination on images and noise injection and behaves more robustly than several classical global and local thresholding methods.
NASA Astrophysics Data System (ADS)
Watanabe, Shun-ichi; Bock, Yehuda; Melgar, Diego; Tadokoro, Keiichi
2018-03-01
The recent availability of Global Positioning System-Acoustic seafloor geodetic observations enables us to resolve the spatial distribution of the slip deficit rate near the Nankai trough, southwestern Japan. Considering a tectonic block model and the transient deformation due to the major earthquakes in this area, the slip deficit rate between the two relevant blocks can be estimated. In this study, we remove the time-dependent postseismic deformation of the 2004 southeastern off the Kii Peninsula earthquakes (MJMA 7.1, 7.4), which had led to the underestimation of the slip deficit rate in earlier studies. We model the postearthquake viscoelastic relaxation using the 3D finite element model with bi-viscous Burgers rheology, as well as the afterslip on the finite faults. The corrected Global Positioning System-Acoustic and land-based Global Navigation Satellite Systems data are aligned to the existing tectonic model and used to estimate the slip deficit rate on the plate boundary. We then calculate the coseismic displacements and tsunami wave propagation with the simple assumption that a hundred years of constant slip deficit accumulation was released instantaneously. To evaluate the influence of uncertainties in the plate interface geometry on a tsunami model for the Nankai trough, we investigated two different geometries and performed checkerboard inversion simulations. Although the two models indicate roughly similar results, the peak height of the tsunami wave and its arrival time at several points are significantly different in terms of the expected hazard.
NASA Technical Reports Server (NTRS)
2006-01-01
13 March 2006 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a portion of a trough in the Sirenum Fossae region. On the floor and walls of the trough, large -- truck- to house-sized -- boulders are observed at rest. However, there is evidence in this image for the potential for mobility. In the central portion of the south (bottom) wall, a faint line of depressions extends from near the middle of the wall, down to the rippled trough floor, ending very near one of the many boulders in the area. This line of depressions is a boulder track; it indicates the path followed by the boulder as it trundled downslope and eventually came to rest on the trough floor. Because it is on Mars, even when the boulder is sitting still, this once-rolling stone gathers no moss. Location near: 29.4oS, 146.6oW Image width: 3 km (1.9 mi) Illumination from: upper left Season: Southern SummerNear-trench slip potential of megaquakes evaluated from fault properties and conditions
Hirono, Tetsuro; Tsuda, Kenichi; Tanikawa, Wataru; Ampuero, Jean-Paul; Shibazaki, Bunichiro; Kinoshita, Masataka; Mori, James J.
2016-01-01
Near-trench slip during large megathrust earthquakes (megaquakes) is an important factor in the generation of destructive tsunamis. We proposed a new approach to assessing the near-trench slip potential quantitatively by integrating laboratory-derived properties of fault materials and simulations of fault weakening and rupture propagation. Although the permeability of the sandy Nankai Trough materials are higher than that of the clayey materials from the Japan Trench, dynamic weakening by thermally pressurized fluid is greater at the Nankai Trough owing to higher friction, although initially overpressured fluid at the Nankai Trough restrains the fault weakening. Dynamic rupture simulations reproduced the large slip near the trench observed in the 2011 Tohoku-oki earthquake and predicted the possibility of a large slip of over 30 m for the impending megaquake at the Nankai Trough. Our integrative approach is applicable globally to subduction zones as a novel tool for the prediction of extreme tsunami-producing near-trench slip. PMID:27321861
Gangodagamage, Chandana; Wullschleger, Stan
2014-07-03
The dataset represents microtopographic characterization of the ice-wedge polygon landscape in Barrow, Alaska. Three microtopographic features are delineated using 0.25 m high resolution digital elevation dataset derived from LiDAR. The troughs, rims, and centers are the three categories in this classification scheme. The polygon troughs are the surface expression of the ice-wedges that are in lower elevations than the interior polygon. The elevated shoulders of the polygon interior immediately adjacent to the polygon troughs are the polygon rims for the low center polygons. In case of high center polygons, these features are the topographic highs. In this classification scheme, both topographic highs and rims are considered as polygon rims. The next version of the dataset will include more refined classification scheme including separate classes for rims ad topographic highs. The interior part of the polygon just adjacent to the polygon rims are the polygon centers.
Cordero-Coma, Miguel; Calleja-Antolín, Sara; Garzo-García, Irene; Nuñez-Garnés, Ana M; Álvarez-Castro, Carolina; Franco-Benito, Manuel; Ruiz de Morales, Jose G
2016-12-01
To evaluate the rate of immunogenicity induced by adalimumab and its relationship with drug serum levels and clinical responses in patients with noninfectious uveitis. Prospective observational study. Consecutive patients from 1 referral center who initiated treatment with adalimumab for active noninfectious uveitis resistant to conventional therapy. All patients received 40 mg adalimumab every other week. Patients were evaluated clinically and immunologically before and after 4, 8, and 24 weeks of treatment. Clinical evaluation included assessment of changes in visual acuity, degree of inflammation in the anterior chamber and vitreous cavity, central macular thickness, and retinal angiographic leakage. Immunologic evaluation included assessment of serum trough adalimumab and antibodies against adalimumab (AAA) levels and class II HLA typing. Twenty-five patients were enrolled. Overall, 18 of 25 patients (72%) showed a favorable clinical response to adalimumab therapy. Eleven patients (44%) achieved a complete response and 7 (28%) achieved a partial response. However, 7 of 25 patients (28%) were considered nonresponders. Median trough adalimumab serum levels were higher in responders than in nonresponders (P < 0.001). We observed AAA positivity (AAA+) at least 1 time point in 8 of 25 patients (32%), including 4 with transitory AAA and 4 with permanent AAA. In all patients with permanent AAA+, trough adalimumab levels became undetectable (P < 0.001). However, in patients who demonstrated transitory AAA+, no correlation was observed between AAA titers and adalimumab trough levels (P = 0.2).Concomitant immunosuppression did not show any protective effect on adalimumab immunogenicity in our cohort. An association between the presence of AAA+ and a worse uveitis outcome was observed only in patients with permanent AAA+, which correlated with undetectable adalimumab trough levels (P = 0.014). Treatment of noninfectious uveitis with adalimumab is associated with high rates of favorable clinical response. Overall, adalimumab trough levels were higher in responder patients. Development of permanent AAA was associated with undetectable trough adalimumab levels and worse uveitis outcome. Immunogenicity was more common in patients in whom uveitis was associated with a systemic disease and was not influenced by concomitant immunosuppressors. Copyright © 2016 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.
Brajon, Sophie; Laforest, Jean-Paul; Schmitt, Océane; Devillers, Nicolas
2016-08-01
This study investigated whether individual behavioural characteristics of piglets and stress induced by experience with humans can influence learning performance. After weaning, piglets received a chronic experience with humans to modulate their emotional state: rough (ROU), gentle (GEN), or minimal (MIN) experience. Simultaneously, they were trained on a discrimination task. Afterward, their behaviour during challenge tests was assessed. The first learning step of the task involved associating a positive sound cue with a response (approach a trough) and success of piglets depended mostly on motivation to seek for reward. Although the experience with humans did not have direct effect, the degree of fear of handler, measured based on their reactivity to a human approach test, was related to motivation to seek rewards and learning speed of this first step in stressed ROU piglets, but not in MIN and GEN piglets. In contrast, the second learning step was more cognitively challenging, since it involved discrimination learning, including negative cues during which piglets had to learn to avoid the trough. Locomotion activity, measured during an open-field test, was associated with performance of the discrimination learning. To conclude, fearfulness towards humans and locomotion activity are linked with learning performance in relation to task complexity, highlighting the necessity to take into account these factors in animal research and management. Crown Copyright © 2016. Published by Elsevier B.V. All rights reserved.
Preliminary report, cruises L1-86-NC and L2-86-NC, Escanaba Trough, Gorda Ridge
Morton, J.L.; Normark, W.R.; Ross, Stephanie L.; Koski, R.A.; Holmes, M.L.; Shanks, Wayne C.; Zierenberg, R.A.; Lyle, M.W.; Benninger, L.M.
1987-01-01
Eight large (up to 200 m across) and many small massive sulfide deposits were photographed and sampled at the sediment-covered Escanaba Trough, southern Gorda Ridge, during S.P. Lee cruises L1-86-NC and L2-86-NC in 1986. The deposits are associated with two volcanic edifices within the sedimentary fill along the axis of Escanaba Trough. The sulfide and other hydrothermal minerals are deposited on the seafloor as well as within the sedimentary section. High concentrations of Pb and As in some of the sulfide samples indicates significant interaction between hydrothermal fluids and sediment at depth.
Sedimentation, volcanism, and ancestral lakes in the Valles Marineris: Clues from topography
NASA Technical Reports Server (NTRS)
Lucchitta, B. K.; Isbell, N. K.; Howington-Kraus, A.
1993-01-01
Compilation of a simplified geologic/geomorphic map onto a digital terrain model of Valles Marineris has permitted quantitative evaluations of topographic parameters. The study showed that, if their interior layered deposits are lacustrine, the ancestral Valles Marineris must have consisted of isolated basins. If, on the other hand, the troughs were interconnected as they are today, the deposits are most likely to volcanic origin, and the mesas in the peripheral troughs may be table mountains. The material eroded from the trough walls was probably not sufficient to form all of the interior layered deposits, but it may have contributed significantly to their formation.
Performance Evaluation of Dual-axis Tracking System of Parabolic Trough Solar Collector
NASA Astrophysics Data System (ADS)
Ullah, Fahim; Min, Kang
2018-01-01
A parabolic trough solar collector with the concentration ratio of 24 was developed in the College of Engineering; Nanjing Agricultural University, China with the using of the TracePro software an optical model built. Effects of single-axis and dual-axis tracking modes, azimuth and elevating angle tracking errors on the optical performance were investigated and the thermal performance of the solar collector was experimentally measured. The results showed that the optical efficiency of the dual-axis tracking was 0.813% and its year average value was 14.3% and 40.9% higher than that of the eat-west tracking mode and north-south tracking mode respectively. Further, form the results of the experiment, it was concluded that the optical efficiency was affected significantly by the elevation angle tracking errors which should be kept below 0.6o. High optical efficiency could be attained by using dual-tracking mode even though the tracking precision of one axis was degraded. The real-time instantaneous thermal efficiency of the collector reached to 0.775%. In addition, the linearity of the normalized efficiency was favorable. The curve of the calculated thermal efficiency agreed well with the normalized instantaneous efficiency curve derived from the experimental data and the maximum difference between them was 10.3%. This type of solar collector should be applied in middle-scale thermal collection systems.
NASA Astrophysics Data System (ADS)
Encheva, Sylvia; Tumin, Sharil
2009-08-01
Collaboration among various firms has been traditionally used trough single project joint ventures for bonding purposes. Eventhough the performed work is usually beneficial to some extend to all participants, the type of collaboration option to be adapted is strongly influenced by overall purposes and goals that can be achieved. In order to facilitate a choice of collaboration option best suited to a firm's need a computer based model is proposed.
NASA Astrophysics Data System (ADS)
Hermoso, J. L. Navarro; Espinosa-Rueda, Guillermo; Martinez, Noelia; Heras, Carlos; Osta, Marta
2016-05-01
The performance of parabolic trough (PT) receiver tubes (RT) has a direct impact on Solar Thermal Energy (STE) plant production. As a result, one major need of operation and maintenance (O&M) in STE plants is to monitor the state of the receiver tube as a key element in the solar field. However the lack of specific devices so far has limited the proper evaluation of operating receiver tubés thermal performance. As a consequence non-accurate approximations have been accepted until now using infrared thermal images of the glass outer tube. In order to fulfill this need, Abengoa has developed a unique portable device for evaluating the thermal performance and vacuum state of parabolic trough receiver tubes placed in the field. The novel device described in this paper, simultaneously provides the temperature of both the inner steel tube and the outer glass tube enabling a check on manufacturers specifications. The on-field evaluation of any receiver tube at any operating temperature has become possible thanks to this new measuring device. The features and usability of this new measurement system as a workable portable device in operating solar fields provide a very useful tool for all companies in the sector contributing to technology progress. The originality of the device, patent pending P201431969, is not limited to the CSP sector, also having scientific significance in the general measuring instruments field. This paper presents the work carried out to develop and validate the device, also detailing its functioning properties and including the excellent results obtained in the laboratory to determine its accuracy and standard deviation. This information was validated with data collected by O&M teams using this instrument in a commercial CSP plant. The relevance of the device has been evidenced by evaluating a wide sample of RT and the results are discussed in this paper. Finally, all the on field collected data is used to demonstrate the high impact that using this unique portable device will have on a parabolic trough solar power plant.
Inciarte-Mundo, José; Ramirez, Julio; Hernández, Maria Victoria; Ruiz-Esquide, Virginia; Cuervo, Andrea; Cabrera-Villalba, Sonia Raquel; Pascal, Mariona; Yagüe, Jordi; Cañete, Juan D; Sanmarti, Raimon
2016-07-08
Serum levels of calprotectin, a major S100 leucocyte protein, are associated with disease activity in rheumatoid arthritis (RA) and psoriatic arthritis (PsA) patients. Higher drug trough serum levels are associated with good response in patients treated with tumour necrosis factor inhibitors (TNFi). Power Doppler ultrasound (PDUS) synovitis is predictive of flare and progression of structural damage in patients in clinical remission. The purpose of this study was to analyse the accuracy of calprotectin and TNFi trough serum levels in detecting PDUS synovitis in RA and PsA patients in clinical remission or with low disease activity who were receiving TNFi. We conducted a cross-sectional study of 92 patients (42 with RA, 50 with PsA) receiving adalimumab (ADA), etanercept (ETN) or infliximab who were in remission or had low disease activity (28-joint Disease Activity Score based on erythrocyte sedimentation rate <3.2). Associations of calprotectin, TNFi trough serum levels and acute phase reactants with PDUS synovitis were assessed using correlation and linear regression analyses. The accuracy and discriminatory capacity in detecting PDUS synovitis was assessed using ROC curves. PDUS synovitis was found in 62.4 % of RA patients and 32 % of PsA patients. Both RA and PsA patients with PDUS synovitis had higher calprotectin levels and lower TNFi trough serum levels. Calprotectin positively correlated with ultrasound scores (all r coefficients >0.50 in RA). Calprotectin correlated with the PDUS synovitis score in patients treated with ADA and ETN. Using PDUS synovitis (yes or no) as the reference variable, calprotectin had an AUC of 0.826. The best cut-off was ≥1.66 μg/ml, with a likelihood ratio of 2.77. C-reactive protein (AUC 0.673) and erythrocyte sedimentation rate (AUC 0.731) had a lower discriminatory capacity. TNFi trough serum levels were significantly associated with PDUS synovitis (OR 0.67, 95 % CI 0.52-0.85, p < 0.001) but their accuracy (AUC <0.5) was less than that of calprotectin. TNFi trough serum levels were inversely correlated with calprotectin and PDUS synovitis in RA and PsA patients receiving ADA and ETN. Calprotectin and TNFi trough serum levels may help identify PDUS synovitis in RA and PsA patients in clinical remission or with low disease activity.
Convection and Easterly Wave Structure Observed in the Eastern Pacific Warm-Pool during EPIC-2001
NASA Technical Reports Server (NTRS)
Peterson, Walter A.; Cifelli, R.; Boccippio, D.; Rutledge, S. A.; Fairall, C. W.; Arnold, James E. (Technical Monitor)
2002-01-01
During September-October 2001, the East Pacific Investigation of Climate Processes in the Coupled Ocean-Atmosphere System (EPIC-2001) ITCZ field campaign focused on studies of deep convection in the warm-pool region of the East Pacific. In addition to the TAO mooring array, observational platforms deployed during the field phase included the NOAA ship RN Ronald H. Brown, the NSF ship RN Horizon, and the NOAA P-3 and NCAR C-130 aircraft. This study combines C-band Doppler radar, rawinsonde, and surface heat flux data collected aboard the RN Brown to describe ITCZ convective structure and rainfall statistics in the eastern Pacific as a function of 3-5 day easterly wave phase. Three distinct easterly wave passages occurred during EPIC-2001. Wind and thermodynamic data reveal that the wave trough axes exhibited positively correlated U and V winds and a slight westward phase tilt with height. A relatively strong (weak) northeasterly deep tropospheric shear followed the trough (ridge) axis. Temperature and humidity perturbations exhibited mid-to upper level cooling (warming) and drying (moistening) in the northerly (trough and southerly) phase. At low levels warming (cooling) occurred in the northerly (southerly) phase with little change in the relative humidity, though mixed layer mixing ratios were larger during the northerly phase. When composited, radar, sounding, lightning and surface heat flux observations suggest the following systematic behavior as a function of wave phase: approximately zero to one quarter wavelength ahead of (behind) the wave trough in northerly (southerly) flow, larger (smaller) CAPE, lower (higher) CIN, weaker (stronger) tropospheric shear, higher (lower) conditional mean rain rates, higher (lower) lightning flash densities, and more (less) robust convective vertical structure occurred. Latent and sensible heat fluxes reached a minimum in the northerly phase and then increased through the trough, reaching a peak during the ridge phase (leading the peak in CAPE). From a radar echo coverage perspective, larger areas of light rain and slightly larger (10%) area averaged rain rates occurred in the vicinity of, and just behind, the trough axes in southerly flow. Importantly, the transition in convective structure observed across the trough axis when considered with the relatively small change in area mean rain rates suggests the presence of a transition in the vertical structure of diabatic heating across the easterly waves examined. The inferred transition in heating structure is supported by radar diagnosed divergence profiles that exhibit convective (stratiform) characteristics ahead of (behind) the trough.
Alt, J.C.; Shanks, Wayne C.; Jackson, M.C.
1993-01-01
The sulfur contents and sulfur isotopic compositions of 24 glassy submarine volcanics from the Mariana Island Arc and back-arc Mariana Trough were determined in order to investigate the hypothesis that subducted seawater sulfur (??34S = 21???) is recycled through arc volcanism. Our results for sulfur are similar to those for subaerial arc volcanics: Mariana Arc glasses are enriched in 34S (??34S = up to 10.3???, mean = 3.8???) and depleted in S (20-290 ppm, mean = 100 ppm) relative to MORB (850 ppm S, ??34S = 0.1 ?? 0.5???). The back-arc trough basalts contain 200-930 ppm S and have ??34S values of 1.1 ?? 0.5???, which overlap those for the arc and MORB. The low sulfur contents of the arc and some of the trough glasses are attributed to (1) early loss of small amounts of sulfur through separation of immiscible sulfide and (2) later vapor-melt equilibrium control of sulfur contents and loss of sulfur in a vapor phase from sulfide-undersaturated melts near the minimum in sulfur solubility at f{hook}O2 ??? NNO (nickel-nickel oxide). Although these processes removed sulfur from the melts their effects on the sulfur isotopic compositions of the melts were minimal. Positive trends of ??34S with 87Sr 86Sr, LILE and LREE contents of the arc volcanics are consistent with a metasomatic seawater sulfur component in the depleted sub-arc mantle source. The lack of a 34S-rich slab signature in the trough lavas may be attributed to equilibration of metasomatic fluid with mantle material along the longer pathway from the slab to the source of the trough volcanics. Sulfur is likely to have been transported into the mantle wedge by metasomatic fluid derived from subducted sediments and pore fluids. Gases extracted from vesicles in arc and back-arc samples are predominantly H2O, with minor CO2 and traces of H2S and SO2. CO2 in the arc and back-arc rocks has ??13C values of -2.1 to -13.1???, similar to MORB. These data suggest that degassing of CO2 could explain the slightly lower ??13C values for some Mariana Trough volcanic glasses, and that incorporation of subduction-derived organic carbon into the Mariana Trough mantle source may not be necessary. More analyses are required to resolve this question, however. ?? 1993.
NASA Astrophysics Data System (ADS)
Sawai, Y.; Momohara, A.
2017-12-01
Five episodic submergence events during the past 3500 years were recognized at the Ukishima-ga-hara lowland, northern coast of Suruga Trough (eastern Nankai Trough). Coastal submergence in this region was originally reported by Osamu Fujiwara and his colleagues (e.g., Fujiwara et al., 2016) based mainly on changes in lithostratigraphy from a peaty layer that abruptly changed to a light-colored mud and results of microfossil analyses (pollen and diatoms from 57 and 13 samples, respectively). They attributed the submergence events to coseismic deformation associated with earthquakes in the Fujikawa-kako fault zone or Suruga Trough. Here I reevaluated the micropaleontology of this area using 200 samples from 15 cores to reconstruct the full history of coastal submergence during the last few thousand years. The submergence events were shown not by lithostratigraphy but clearly by changes in fossil diatom assemblages and plant macrofossils. For example, at about 2.3 m and 3.1 m below the ground surface, while aerophilic diatoms (such as Diadesmis contenta and Diploneis elliptica) dominate the underlying peaty layer, freshwater and brackish planktonic taxa (Aulacoseira and Thalassiosira) abound in the overlying layer. As many as five such changes in diatom assemblages were found in a 8-m core and radiocarbon ages constrain the age of the entire sequence to 3500 yr BP.
Reynolds, Richard J.
2007-01-01
The nature and extent of valley-fill aquifers in the Port Jervis Trough was evaluated for a 16 mile section of this valley from the Orange-Sullivan County line near Westbrookville to the village of Napanoch in Ulster County as part of the U.S. Geological Survey's Detailed Aquifer Mapping Program in New York State. The principal aquifer in the Port Jervis Trough is a 50 feet thick outwash aquifer that extends from the Phillipsport Moraine near Summitville, southward through the study area to Port Jervis, N.Y. Previous studies had estimated as much as 500 feet of saturated drift in parts of the Trough, but new well data show that much of the valley fill consists of fine-grained lacustrine sediments. Drillers' logs show that the outwash aquifer south of Summitville is underlain by as much as 275 feet of lacustrine silt and clay. North of the Phillipsport Moraine, three large glaciolacustrine deltas that were built into Glacial Lake Wawarsing provide some local and discontinuous confined aquifers through their coarser bottomset beds. Elsewhere in the Trough, collapsed and buried portions of kame deltas and terraces provide local confined aquifers. The outwash aquifer appears to be very transmissive, as evidenced by the high specific capacity of 130 gallons per minute per foot [(gal/min)/ft] of a commercial test well screened in the aquifer.
NASA Astrophysics Data System (ADS)
Bai, Yefei; Yamazaki, Yoshiki; Cheung, Kwok Fai
2018-04-01
The latest tsunami evacuation maps of Hawaii include an extreme scenario triggered by an Mw 9.3 Aleutian earthquake with large near-trench rupture. The tectonic plate motion produces concentrated seafloor uplift toward the deepest part of the trench generating a tsunami with strong non-hydrostatic characters. A parametric study shows the skewed seafloor uplift produces a dispersive leading crest followed by a prominent trough in the form of an N-wave. The trough maintains its depth across the ocean in the absence of side lobes and dispersion. Shifting of the uplift toward the trench tends to deepen the trough, but has diminishing effects on the wave crest away from the source. While the attenuated leading crest produces relatively moderate runup on north-facing shores of the Hawaiian Islands, with matching of the N-wave and shelf resonance periods, the trough produces an impulsive drawdown followed by an energetic upswing with unprecedented runup for a far-field tsunami. A set of control computations without dispersion reaffirms that a non-hydrostatic model is essential to account for these complex wave processes from the source to the shore. This case study highlights the unique tsunami hazards posed by the Aleutians to Hawaii and the role of wave troughs in delineating the impacts for hazard assessment and engineering design.
Seismic stratigraphic architecture of the Disko Bay trough-mouth fan system, West Greenland
NASA Astrophysics Data System (ADS)
Hofmann, Julia C.; Knutz, Paul C.
2015-04-01
Spatial and temporal changes of the Greenland Ice Sheet on the continental shelf bordering Baffin Bay remain poorly constrained. Then as now, fast-flowing ice streams and outlet glaciers have played a key role for the mass balance and stability of polar ice sheets. Despite their significance for Greenland Ice Sheet dynamics and evolution, our understanding of their long-term behaviour is limited. The central West Greenland margin is characterized by a broad continental shelf where a series of troughs extend from fjords to the shelf margin, acting as focal points for trough-mouth fan (TMF) accummulations. The sea-ward bulging morphology and abrupt shelf-break of these major depositional systems is generated by prograding depocentres that formed during glacial maxima when ice streams reached the shelf edge, delivering large amounts of subglacial sediment onto the continental slope (Ó Cofaigh et al., 2013). The aim of this study is to unravel the seismic stratigraphic architecture and depositional processes of the Disko Bay TMF, aerially the largest single sedimentary system in West Greenland, using 2D and 3D seismic reflection data, seabed bathymetry and stratigraphic information from exploration well Hellefisk-1. The south-west Disko Bay is intersected by a deep, narrow trough, Egedesminde Dyb, which extends towards the southwest and links to the shallower and broader cross-shelf Disko Trough (maximum water depths of > 1000 m and a trough length of c. 370 km). Another trough-like depression (trough length of c. 120 km) in the northern part of the TMF, indicating a previous position of the ice stream, can be distinguished on the seabed topographic map and the seismic images. The Disko Bay TMF itself extends from the shelf edge down to the abyssal plain (abyssal floor depths of 2000 m) of the southern Baffin Bay. Based on seismic stratigraphic configurations relating to reflection terminations, erosive patterns and seismic facies (Mitchum et al., 1977), the TMF succession has been divided into five seismic units, each representing different stages in the progradational accumulation of the TMF system. This poster and ongoing study will discuss how the ice-stream flow switching is linked to changes in depocentres of sedimentary sequences and further investigate the major controls, e.g. ice-sheet dynamics, ocean-climate changes, tectonic forcing and subglacial geology, that determined the evolution of the Disko Bay TMF. Essencial bibliography Mitchum, R.M. Jr., Vail, P.R., Sangree, J.B., 1977. Seismic stratigraphy and global changes of sea level, Part 6: Stratigraphic interpretation of seismic reflection patterns in depositional sequences. AAPG Memoir 26, 117-133. Ó Cofaigh, C., Andrews, J.T., Jennings, A.E., Dowdeswell, J.A., Hogan, K.A., Kilfeather, A.A., Sheldon, C., 2013. Glacimarine lithofacies, provenance and depositional processes on a West Greenland trough-mouth fan. Journal of Quaternary Science, 28(1), 13-26.
NASA Astrophysics Data System (ADS)
Skurikhin, A. N.; Gangodagamage, C.; Rowland, J. C.; Wilson, C. J.
2013-12-01
Arctic lowland landscapes underlain by permafrost are often characterized by polygon-like patterns such as ice-wedge polygons outlined by networks of ice wedges and complemented with polygon rims, troughs, shallow ponds and thermokarst lakes. Polygonal patterns and corresponding features are relatively easy to recognize in high spatial resolution satellite imagery by a human, but their automated recognition is challenging due to the variability in their spectral appearance, the irregularity of individual trough spacing and orientation within the patterns, and a lack of unique spectral response attributable to troughs with widths commonly between 1 m and 2 m. Accurate identification of fine scale elements of ice-wedge polygonal tundra is important as their imprecise recognition may bias estimates of water, heat and carbon fluxes in large-scale climate models. Our focus is on the problem of identification of Arctic polygonal tundra fine-scale landscape elements (as small as 1 m - 2 m width). The challenge of the considered problem is that while large water bodies (e.g. lakes and rivers) can be recognized based on spectral response, reliable recognition of troughs is more difficult. Troughs do not have unique spectral signature, their appearance is noisy (edges are not strong), their width is small, and they often form connected networks with ponds and lakes, and thus they have overlapping spectral response with other water bodies and surrounding non-water bodies. We present a semi-automated approach to identify and classify Arctic polygonal tundra landscape components across the range of spatial scales, such as troughs, ponds, river- and lake-like objects, using high spatial resolution satellite imagery. The novelty of the approach lies in: (1) the combined use of segmentation and shape-based classification to identify a broad range of water bodies, including troughs, and (2) the use of high-resolution WorldView-2 satellite imagery (with resolution of 0.6 m) for this identification. The approach starts by segmenting water bodies from an image, which are then categorized using shape-based classification. Segmentation uses combination of pan sharpened multispectral bands and is based on the active contours without edges technique. The segmentation is robust to noise and can detect objects with weak boundaries that is important for extraction of troughs. We then categorize the segmented regions via shape based classification. Because segmentation accuracy is the main factor impacting the quality of the shape-based classification, for segmentation accuracy assessment we created reference image using WorldView-2 satellite image of ice-wedge polygonal tundra. Reference image contained manually labelled image regions which cover components of drainage networks, such as troughs, ponds, rivers and lakes. The evaluation has shown that the approach provides a good accuracy of segmentation and reasonable classification results. The overall accuracy of the segmentation is approximately 95%, the segmentation user's and producer's accuracies are approximately 92% and 97% respectively.
NASA Astrophysics Data System (ADS)
Rebesco, Michele; Liu, Yanguang; Camerlenghi, Angelo; Winsborrow, Monica; Sverre Laberg, Jan; Caburlotto, Andrea; Diviacco, Paolo; Accettella, Daniela; Sauli, Chiara; Wardell, Nigel
2010-05-01
Kveithola Trough, an E-W trending cross-shelf glacial trough in the NW Barents Sea, was surveyed for the first time during the EGLACOM cruise between 8th July and 4th August 2008 on board R/V OGS-Explora. EGLACOM (Evolution of a GLacial Arctic COntinental Margin: the southern Svalbard ice stream-dominated sedimentary system) project is the Italian contribution to the International Polar Year (IPY) Activity 367 (Neogene ice streams and sedimentary processes on high- latitude continental margins - NICE STREAMS). Such IPY activity included as well the Spanish SVAIS 2008 cruise on board BIO Hesperides. EGLACOM data acquisition, focused on the Storfjorden Fan and Kveithola Trough, included a multi-channel seismic (MCS) reflection survey and the simultaneous collection of swath bathymetry and sub-bottom CHIRP profiles. Swath bathymetry in the Kveithola Trough shows that the seafloor is characterized by E-W trending mega-scale glacial lineations (MSGL). These include large-scale ridges about 2 km wide and 15 m high as well as smaller grooves about 100 m wide and a few metres deep. Such MSGL record the fast flow of an ice stream draining the Svalbard/Barents Sea Ice Sheet (SBSIS) during the Last Glacial Maximum (LGM). MSGL are overprinted by transverse sediment ridges about 15 km apart which give rise to a staircase long profile of the trough. Such transverse ridges are interpreted as grounding-zone wedges (GZW) formed by deposition of unconsolidated, saturated subglacial till during ice stream retreat. Sub-bottom (CHIRP) and multi-channel reflection seismic data show that the morphology is controlled by stacked sets of lensoidal transparent units (tills) overlain by a draping glaciomarine unit up to over 15 m thick. Formed during temporary stillstands in grounding-zone position before complete deglaciation, GZW ridges are diagnostic of episodic retreat. Our data allow the reconstruction of deglaciation in the Spitsbergen Bank area, with each stage during deglaciation recorded by deposition of a GZW. Three independent lines of reasoning suggest that an ice cap persisted on Spitsbergen Bank for some thousand years and lasted much longer than those that fed the adjacent glacial troughs: 1) the freshness of the morphology in Kveithola Trough compared to that of adjacent Storfjorden and Bear Island troughs; 2) the volume of sediment in the GZW ridges compared to the small catchment area; 3) preliminary assessment of the stratigraphic position of debris flow deposits on the continental slope. The 15 m of sedimentary drape deposited on top of GZW ridges contains a high-resolution palaeoclimatic record of the last thousand years, which accumulated at a very high average sedimentation rate. Sampling (through drilling) of the thin glaciomarine sediments between the till lenses of the successive GZW ridges may allow the dating of deglaciation phases in the Barents Sea.
Sundaram, Arun; Alshaikh, Belal; Dersch-Mills, Deonne; Dobry, Jenna; Akierman, Albert R; Yusuf, Kamran
2017-06-01
Extended-interval dosing (EID) regimens of gentamicin have been validated for treating confirmed or suspected early- and late-onset sepsis in preterm infants in the first week of life. Despite the marked changes in volume of distribution and renal clearance in preterm infants after the first few days of life, few studies have validated EID regimens of gentamicin in this population. The objective of the study was to evaluate an EID regimen of gentamicin in infants born at <32 weeks' gestational age and aged >7 days. This observational study of an EID regimen was conducted in 39 infants. Dosing interval was based on the serum drug concentration at 22 hours after the administration of the first dose of 5 mg/kg. Gentamicin peak (5-12 µg/mL) and trough (<2 µg/mL) levels were compared to those in a historical control group of 39 infants who received traditional-interval dosing (TID) of 2.5 mg/kg of gentamicin with dosing intervals of 8, 12, or 24 hours. There were no differences in birthweight, gestational age at birth, postmenstrual age, weight at the start of gentamicin administration, postnatal age, small for gestational age status, antenatal corticosteroid use, or postnatal indomethacin exposure between the 2 groups. In the EID group, dosing intervals were 24 hours in 30 infants, 36 hours in 6 infants, and 48 hours in 3 infants. Compared with the TID group (n = 39), the EID group had a significantly higher peak level (median, 9.0 vs 4.7 µg/mL) and a significantly lower trough level (median, 0.7 vs 1.1 µg/mL) (both, P < 0.001). On regression analysis, the postmenstrual age was correlated significantly with trough levels in the EID group. There was no adverse effect on renal function in either group. On follow-up, 1 infant in the EID group and 2 infants in the TID group had evidence of sensorineural hearing loss. In infants born at <32 weeks' gestation and >7 days of age, an EID gentamicin regimen, with a dosing interval based on a single concentration measurement at 22 hours after the administration of the first dose, achieved therapeutic peak and trough levels and performed significantly better than did a TID regimen in reaching target peak and trough levels. Larger-scale trials are needed for assessing the clinical efficacy (treatment failure/success) of these regimens. Copyright © 2017 Elsevier HS Journals, Inc. All rights reserved.
Aerial mulching techniques-trough fire
Robert Faust
2008-01-01
The Trough fire occurred in August 2001 on the Mendocino National Forest of northern California. A burned area emergency rehabilitation team evaluated the fire effects on the watershed. Concerns were soil from the denuded slopes moving into streams affecting fishery values, reservoir sedimentation and storm runoff plugging culverts leading to road wash outs. Past...
Strawberry Production in Soilless Substrate Troughs – Plant Growth
USDA-ARS?s Scientific Manuscript database
Soilless substrates made of peat moss, coconut coir, perlite, rockwool or bark are pathogen free and they have been used in strawberry production in Europe in troughs or containers. Open field strawberry production in soilless substrate is new to California growers. The objective of this study was t...
OUT Success Stories: Solar Trough Power Plants
DOE R&D Accomplishments Database
Jones, J.
2000-08-01
The Solar Electric Generating System (SEGS) plants use parabolic-trough solar collectors to capture the sun's energy and convert it to heat. The SEGS plants range in capacity from 13.8 to 80 MW, and they were constructed to meet Southern California Edison Company's periods of peak power demand.
Qiu, Yun; Mao, Ren; Chen, Bai-Li; Zhang, Sheng-Hong; Guo, Jing; He, Yao; Zeng, Zhi-Rong; Ben-Horin, Shomron; Chen, Min-Hu
2017-09-01
It is not clear whether combination therapy with immunomodulators affects the immunogenicity of tumor necrosis factor (TNF) antagonists in patients with inflammatory bowel disease. We performed a meta-analysis to quantify the effects of combined immunomodulator therapy on the presence of antibodies against TNF antagonists (antidrug antibodies [ADAs]) and trough levels of anti-TNF agents. We systematically searched publication databases for studies that reported prevalence of ADAs in patients who received anti-TNF agents. Raw data from studies that met the inclusion criteria were pooled to determine effect estimates. We performed subgroup and metaregression analyses to determine the level of heterogeneity among study outcomes. We analyzed findings from 35 studies that met inclusion criteria (results reported from 6790 patients with inflammatory bowel disease). The pooled risk ratio for formation of ADAs in patients receiving combined therapy with immunomodulators, versus that of patients receiving anti-TNF monotherapy, was 0.49 (95% confidence interval, 0.41-0.59; P < .001). However, the pooled analysis did not demonstrate a significant difference in trough levels of anti-TNF agents between patients with versus without concurrent use of immunomodulators (standardized mean difference, 0.11; 95% confidence interval, 0.19-0.41; P = .47). Subgroup analyses of patients treated with different TNF antagonists revealed no difference in the formation of ADAs (P = .50 for interaction); the protective effect of immunomodulators did not differ with type of drug patients were given (methotrexate vs thiopurines), or assay for ADA. We observed heterogeneity only among studies of patients with ulcerative colitis (I 2 = 76%). Funnel plot and Egger test analyses indicated publication bias in the studies (P = .001). In a meta-analysis of published studies, we associated combined treatment with immunomodulators with reduced risk of formation of antibodies against TNF antagonists in patients with inflammatory bowel disease. Copyright © 2017 AGA Institute. Published by Elsevier Inc. All rights reserved.
Morphological study of electrophoretically deposited TiO2 film for DSSC application
NASA Astrophysics Data System (ADS)
Patel, Alkesh B.; Patel, K. D.; Soni, S. S.; Sonigara, K. K.
2018-05-01
In the immerging field of eco-friendly and low cost photovoltaic devices, dye sensitized solar cell (DSSC) [1] has been investigated as promising alternative to the conventional silicon-based solar cells. In the DSSC device, photoanode is crucial component that take charge of holding sensitizer on it and inject the electrons from the sensitizer to current collector. Nanoporous TiO2 is the most relevant candidate for the preparation of photoanode in DSSCs. Surface properties, morphology, porosity and thickness of TiO2 film as well as preparation technique determine the performance of device. In the present work we have report the study of an effect of nanoporous anatase titanium dioxide (TiO2) film thickness on DSSC performance. Photoanode TiO2 (P25) film was deposited on conducting substrate by electrophoresis technique (EPD) and film thickness was controlled during deposition by applying different current density for a constant time interval. Thickness and surface morphology of prepared films was studied by SEM and transmittance analysis. The same set of photoanode was utilized in DSSC devices using metal free organic dye sensitizer to evaluate the photovoltaic performance. Devices were characterized through Current-Voltage (I-V) characteristic, electrochemical impedance spectroscopy (EIS) and open circuit voltage decay curves. Dependency of device performance corresponding to TiO2 film thickness is investigated through the lifetime kinetics of electron charge transfer mechanism trough impedance fitting. It is concluded that appropriate thickness along with uniformity and porosity are required to align the dye molecules to respond efficiently the incident light photons.
Miller, Todd S.; Karig, Daniel E.
2010-01-01
In 2002, the U.S. Geological Survey, in cooperation with the Tompkins County Planning Department began a series of studies of the stratified-drift aquifers in Tompkins County to provide geohydrologic data for planners to develop a strategy to manage and protect their water resources. This aquifer study in lower Sixmile Creek and Willseyville Creek trough is the second in a series of aquifer studies in Tompkins County. The study area is within the northern area of the Appalachian Plateau and extends about 9 miles from the boundary between Tompkins County and Tioga County in the south to just south of the City of Ithaca in the north. In lower Sixmile Creek and Willseyville Creek trough, confined sand and gravel aquifers comprise the major water-bearing units while less extensive unconfined units form minor aquifers. About 600 people who live in lower Sixmile Creek and Willseyville Creek trough rely on groundwater from the stratified-drift aquifer system. In addition, water is used by non-permanent residents such as staff at commercial facilities. The estimated total groundwater withdrawn for domestic use is about 45,000 gallons per day (gal/d) or 0.07 cubic foot per second (ft3/s) based on an average water use of 75 gal/d per person for self-supplied water systems in New York. Scouring of bedrock in the preglacial lower Sixmile Creek and Willseyville Creek valleys by glaciers and subglacial meltwaters truncated hillside spurs, formed U-shaped, transverse valley profiles, smoothed valley walls, and deepened the valleys by as much as 300 feet (ft), forming a continuous trough. The unconsolidated deposits in the study area consist mostly of glacial drift, both unstratified drift (till) and stratified drift (laminated lake, deltaic, and glaciofluvial sediments), as well as some post-glacial stratified sediments (lake-bottom sediments that were deposited in reservoirs, peat and muck that were deposited in wetlands, and alluvium deposited by streams). Multiple advances and retreats of the ice in the study area resulted in several sequences of various types of glacial deposits. A large moraine (Valley Heads Moraine) dominates the southern part of the study area, a large delta dominates the central part, and ground moraine (mostly till) dominates the northern part. Glacial sediments in the center of the lower Sixmile Creek and Willseyville Creek trough typically range from 150 to 200 ft but can be greater than 300 ft in some places. Where the sediments are composed of sand and gravel they form aquifers. In most parts of the lower Sixmile Creek and Willseyville Creek trough, there is an upper and a basal confined aquifer. However, underlying the central parts of the Brooktondale delta, there are as many as four confined aquifers, whereas in the northern part of the study area, only one extensive confined aquifer is present. The major sources of recharge to these confined aquifers are (1) direct infiltration of precipitation where confined aquifers crop out at land surface (mostly along the western trough wall in the southern and central parts of the study area and, to a lesser degree, along the eastern trough wall); (2) unchanneled surface and subsurface runoff from adjacent upland areas that seeps into the aquifer along the western trough walls; (3) subsurface flow from underlying till or bedrock at the lateral contacts at trough walls; (4) adjacent fine-grained stratified drift, especially when the aquifer is pumped; and (5) discharge from bedrock at the bottom and sides of the trough. In the central part of the study area, the surficial coarse-grained sediments (sand and gravel) comprise a delta near Brooktondale and form a small unconfined aquifer (0.3 square mile). Although much of the upper part of the delta has been removed by several aggregate mining operations, sufficient amounts of sand and gravel remain in most places to form a thin unconfined aquifer. The major sources of recharge to the unconfined aquifer are (1)
Control Chart on Semi Analytical Weighting
NASA Astrophysics Data System (ADS)
Miranda, G. S.; Oliveira, C. C.; Silva, T. B. S. C.; Stellato, T. B.; Monteiro, L. R.; Marques, J. R.; Faustino, M. G.; Soares, S. M. V.; Ulrich, J. C.; Pires, M. A. F.; Cotrim, M. E. B.
2018-03-01
Semi-analytical balance verification intends to assess the balance performance using graphs that illustrate measurement dispersion, trough time, and to demonstrate measurements were performed in a reliable manner. This study presents internal quality control of a semi-analytical balance (GEHAKA BG400) using control charts. From 2013 to 2016, 2 weight standards were monitored before any balance operation. This work intended to evaluate if any significant difference or bias were presented on weighting procedure over time, to check the generated data reliability. This work also exemplifies how control intervals are established.
Improvements in the simulation code of the SOX experiment
NASA Astrophysics Data System (ADS)
Caminata, A.; Agostini, M.; Altenmüeller, K.; Appel, S.; Atroshchenko, V.; Bellini, G.; Benziger, J.; Bick, D.; Bonfini, G.; Bravo, D.; Caccianiga, B.; Calaprice, F.; Carlini, M.; Cavalcante, P.; Chepurnov, A.; Choi, K.; Cribier, M.; D'Angelo, D.; Davini, S.; Derbin, A.; Di Noto, L.; Drachnev, I.; Durero, M.; Etenko, A.; Farinon, S.; Fischer, V.; Fomenko, K.; Franco, D.; Gabriele, F.; Gaffiot, J.; Galbiati, C.; Gschwender, M.; Ghiano, C.; Giammarchi, M.; Goeger-Neff, M.; Goretti, A.; Gromov, M.; Hagner, C.; Houdy, Th.; Hungerford, E.; Ianni, Aldo; Ianni, Andrea; Jonquères, N.; Jany, A.; Jedrzejczak, K.; Jeschke, D.; Kobychev, V.; Korablev, D.; Korga, G.; Kornoukhov, V.; Kryn, D.; Lachenmaier, T.; Lasserre, T.; Laubenstein, M.; Lehnert, B.; Link, J.; Litvinovich, E.; Lombardi, F.; Lombardi, P.; Ludhova, L.; Lukyanchenko, G.; Machulin, I.; Manecki, S.; Maneschg, W.; Manuzio, G.; Marcocci, S.; Maricic, J.; Mention, G.; Meroni, E.; Meyer, M.; Miramonti, L.; Misiaszek, M.; Montuschi, M.; Mosteiro, P.; Muratova, V.; Musenich, R.; Neumair, B.; Oberauer, L.; Obolensky, M.; Ortica, F.; Pallavicini, M.; Papp, L.; Pocar, A.; Ranucci, G.; Razeto, A.; Re, A.; Romani, A.; Roncin, R.; Rossi, N.; Schönert, S.; Scola, L.; Semenov, D.; Skorokhvatov, M.; Smirnov, O.; Sotnikov, A.; Sukhotin, S.; Suvorov, Y.; Tartaglia, R.; Testera, G.; Thurn, J.; Toropova, M.; Unzhakov, E.; Veyssiére, C.; Vishneva, A.; Vivier, M.; Vogelaar, R. B.; von Feilitzsch, F.; Wang, H.; Weinz, S.; Winter, J.; Wojcik, M.; Wurm, M.; Yokley, Z.; Zaimidoroga, O.; Zavatarelli, S.; Zuber, K.; Zuzel, G.
2017-09-01
The aim of the SOX experiment is to test the hypothesis of existence of light sterile neutrinos trough a short baseline experiment. Electron antineutrinos will be produced by an high activity source and detected in the Borexino experiment. Both an oscillometry approach and a conventional disappearance analysis will be performed and, if combined, SOX will be able to investigate most of the anomaly region at 95% c.l. This paper focuses on the improvements performed on the simulation code and on the techniques (calibrations) used to validate the results.
NASA Astrophysics Data System (ADS)
Schrum, H.; Domack, E.; Desantis, L.; Leventer, A.; McMullen, K.; Escutia, C.
2004-12-01
As early as 1912 Sir Douglas Mawson demonstrated that pre-glacial sedimentary successions could be recovered by seafloor dredging of erosional troughs found offshore, East Antarctica. Since then, little systematic dredging has been undertaken in Antarctica despite indications of outcropping strata exposed along seaward flanks of glacially excavated troughs and the dire need to resolve the nature of preglacial and synglacial strata in this region. During cruise NB Palmer 01-01, three dredges were collected in echelon along the seaward flank of the Mertz-Ninnis Trough, parallel to the Mertz Ice Tongue, in water depths of 900 to 450 m. We combine biostratigraphic (palynologic) and lithologic analyses on sedimentary clasts with multi- and single-channel seismic reflection data collected by the WEGA cruise in 2000. 1359 pebble to cobble sized clasts were collected from three dredges. Of these 15% to 43%, within each dredge, were of sedimentary character, including carbonaceous sandstones with plant macrofossils, black sulfide-rich mudstones, siltstones, lignites, red quartz arenites, arkoses, and diamictites in various states of lithification. Palynomorphs were separated from these sedimentary rocks. We examined eleven individual lithologies, nine of which yielded useful palynological detritus. Of these samples, five yielded palynomorphs distinctive to the Paleogene (i.e. Nothofagus flemingii, Tricolporites spp., Proteacidites spp.); two samples contained only Lower Cretaceous palynomorphs, while three samples provided no stratigraphically useful palynomorph kerogen. We combine these results with multi-channel seismic and multibeam swath mapping to demonstrate that dredged materials represent seafloor outcrop or shallow subcrop of strata beneath a thin glacial till. Our stratigraphic model for these samples is consistent with 62 km of multichannel seismic reflection data (WEGA line W02) showing seaward dipping strata onlapping the basement to the southwest and partly infilling a rifted basin of late Cretaceous age. Seaward dipping reflectors above the syn-rift strata represent post-rift deposits ranging from Paleogene to Quaternary. Included within this stratigraphy are lithified diamictites containing Mesozoic palynomorphs in addition to palynomorphs of Early Tertiary age (including dinoflagellates). Seaward dipping reflectors in the deep axis of the Mertz-Ninnis Trough were not sampled directly by our dredges, but are believed to be Lower Cretaceous siltstones by extrapolation to core DF-79-38, 100 km along strike to the southeast (Domack et al., 1980). Furthermore, the thermal maturity of the lignite samples recovered in our collections suggests that the coal is of Early Tertiary age, as are numerous organic-rich mudstones, which contain Paleogene palynomorphs. These results indicate that sedimentary strata in this portion of the Wilkes Land Margin contain significantly thick (greater than 2.7 km) post-rift (drift phase) marine sequences of both pre- and synglacial character. Strategic dredging is a promising methodology by which to sample stratigraphic succession in a cost effective manner along the East Antarctic margin in the absence of, or preparation for, International Ocean Drilling Projects on the shelf. Domack, E. W., Fairchild, W. W., and Anderson, J. B. (1980) Lower Cretaceous sediment from the East Antarctic continental shelf, Nature, 287, 625-626.
Medlin, John B.
1976-05-25
A charging machine for loading fuel slugs into the process tubes of a nuclear reactor includes a tubular housing connected to the process tube, a charging trough connected to the other end of the tubular housing, a device for loading the charging trough with a group of fuel slugs, means for equalizing the coolant pressure in the charging trough with the pressure in the process tubes, means for pushing the group of fuel slugs into the process tube and a latch and a seal engaging the last object in the group of fuel slugs to prevent the fuel slugs from being ejected from the process tube when the pusher is removed and to prevent pressure liquid from entering the charging machine.
Peak Measurement for Vancomycin AUC Estimation in Obese Adults Improves Precision and Lowers Bias.
Pai, Manjunath P; Hong, Joseph; Krop, Lynne
2017-04-01
Vancomycin area under the curve (AUC) estimates may be skewed in obese adults due to weight-dependent pharmacokinetic parameters. We demonstrate that peak and trough measurements reduce bias and improve the precision of vancomycin AUC estimates in obese adults ( n = 75) and validate this in an independent cohort ( n = 31). The precision and mean percent bias of Bayesian vancomycin AUC estimates are comparable between covariate-dependent ( R 2 = 0.774, 3.55%) and covariate-independent ( R 2 = 0.804, 3.28%) models when peaks and troughs are measured but not when measurements are restricted to troughs only ( R 2 = 0.557, 15.5%). Copyright © 2017 American Society for Microbiology.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gdalevich, G.L.; Afonin, V.V.; Eliseev, A.Y.
1986-07-01
Data from the Kosmos-900 satellite are used to examine variations of the ion concentration in the region of the main ionospheric trough at altitudes of about 500 km during the storm of December 18-19, 1978. These variations of ion densities are compared with the variations of the parameters of the interplanetary medium, in particular, with the E /sub y/ = -VB /sub z/ component of the interplanetary electric field. The results of the comparison are discussed. A scheme is proposed for the formation and motion of the trough during magnetic disturbances.
Visual and Auditory Sensitivities and Discriminations
2003-03-03
Experimental Psychology : Human Perception and Performance, 26, 1721-1723. The data have also been reported to ECVP at the Trieste meeting, and to the Edinburgh...design to measure the disparity required to just detect the cyclopean test bars (Macmillan & Creelman , 1991). Each trial consisted of a single...conventionally (Macmillan & Creelman , 1991). Results Grating detection threshold (d =1.0) for observer 1 was estimated as 0.18 arc min peak-to-trough
Hamada, Yohei; Kitamura, Manami; Yamada, Yasuhiro; Sanada, Yoshinori; Sugihara, Takamitsu; Saito, Saneatsu; Moe, Kyaw; Hirose, Takehiro
2018-02-14
A new method for evaluating the in situ rock strength beneath the seafloor is proposed and applied to the Nankai Trough accretionary prism. The depth-continuous in situ rock strength is a critical parameter for numerous studies in earth science, particularly for seismology and tectonics at plate convergence zones; yet, measurements are limited owing to a lack of drilled cores. Here, we propose a new indicator of strength, the equivalent strength (EST), which is determined only by drilling performance parameters such as drill string rotational torque, bit depth, and string rotational speed. A continuous depth profile of EST was drawn from 0 to 3000 m below the seafloor (mbsf) across the forearc basin and accretionary prism in the Nankai Trough. The EST did not show a significant increase around the forearc basin-accretionary prism boundary, but it did show a clear increase within the prism, ca. below 1500 mbsf. This result may indicate that even the shallow accretionary prism has been strengthened by horizontal compression derived from plate subduction. The EST is a potential parameter to continuously evaluate the in situ rock strength during drilling, and its accuracy of the absolute value can be improved by combining with laboratory drilling experiments.
Two-stage solar concentrators based on parabolic troughs: asymmetric versus symmetric designs.
Schmitz, Max; Cooper, Thomas; Ambrosetti, Gianluca; Steinfeld, Aldo
2015-11-20
While nonimaging concentrators can approach the thermodynamic limit of concentration, they generally suffer from poor compactness when designed for small acceptance angles, e.g., to capture direct solar irradiation. Symmetric two-stage systems utilizing an image-forming primary parabolic concentrator in tandem with a nonimaging secondary concentrator partially overcome this compactness problem, but their achievable concentration ratio is ultimately limited by the central obstruction caused by the secondary. Significant improvements can be realized by two-stage systems having asymmetric cross-sections, particularly for 2D line-focus trough designs. We therefore present a detailed analysis of two-stage line-focus asymmetric concentrators for flat receiver geometries and compare them to their symmetric counterparts. Exemplary designs are examined in terms of the key optical performance metrics, namely, geometric concentration ratio, acceptance angle, concentration-acceptance product, aspect ratio, active area fraction, and average number of reflections. Notably, we show that asymmetric designs can achieve significantly higher overall concentrations and are always more compact than symmetric systems designed for the same concentration ratio. Using this analysis as a basis, we develop novel asymmetric designs, including two-wing and nested configurations, which surpass the optical performance of two-mirror aplanats and are comparable with the best reported 2D simultaneous multiple surface designs for both hollow and dielectric-filled secondaries.
USDA-ARS?s Scientific Manuscript database
There are a number of approaches for producing strawberry fruit on a commercial scale without fumigants. One possible approach is to grow strawberries using raised-bed troughs filled with non soil based substrate media. Field trials were conducted using peat, perlite, coir, rice hull, and a redwoo...
Concentrating Solar Power Projects - Chabei 64MW Molten Salt Parabolic
project Status Date: September 29, 2016 Project Overview Project Name: Chabei 64MW Molten Salt Parabolic Technology: Parabolic trough Turbine Capacity: Net: 64.0 MW Gross: 64.0 MW Status: Under development Do you have more information, corrections, or comments? Background Technology: Parabolic trough Status: Under
Small mammals in oak woodlands in the Puget Trough, Washington.
S.M. Wilson; A.B. Carey
2001-01-01
We surveyed the 22 largest sites dominated by Oregon white oaks on the Fort Lewis Military Reservation, Washington, to determine small-mammal community structure and population abundances. Study areas were in the Puget Trough physiographic province and western hemlock vegetation zone. Most oak communities were ecotonal between prairie and Douglas-fir forest. Small...
Concentrating Solar Power Projects - Delingha 50MW Thermal Oil Parabolic
Trough project | Concentrating Solar Power | NREL Delingha 50MW Thermal Oil Parabolic Trough project Status Date: April 17, 2017 Project Overview Project Name: Delingha 50MW Thermal Oil Parabolic Contractor: IDOM : Thermal energy storage system engineering Plant Configuration Solar Field # of Loops: 190
Concentrating Solar Power Projects - Urat Middle Banner 100MW Thermal Oil
Parabolic Trough project | Concentrating Solar Power | NREL Middle Banner 100MW Thermal Oil Thermal Oil Parabolic Trough project Country: China Location: Urat Middle Banner (Inner Mongolia) Owner(s , 2017 Start Production: 2018 Participants Developer(s): Changzhou Royal Tech Solar Thermal Equipment Co
Concentrating Solar Power Projects - Rayspower Yumen 50MW Thermal Oil
Trough project | Concentrating Solar Power | NREL Rayspower Yumen 50MW Thermal Oil Trough project Status Date: January 31, 2017 Project Overview Project Name: Rayspower Yumen 50MW Thermal Oil . Plant Configuration Solar Field Heat-Transfer Fluid Type: Thermal oil Power Block Turbine Capacity
Concentrating Solar Power Projects - Gulang 100MW Thermal Oil Parabolic
Trough project | Concentrating Solar Power | NREL Gulang 100MW Thermal Oil Parabolic Trough project Status Date: September 29, 2016 Project Overview Project Name: Gulang 100MW Thermal Oil Parabolic ): Webmaster Solar Participants Developer(s): Changzhou Royal Tech Solar Thermal Equipment Co., Ltd. Owner(s
SOUTHERN ROCKIES... A BROAD LONG WAVE TROUGH CROSSES THE CENTRAL AND SOUTHERN ROCKIES DURING DAY 1...BEFORE WEAKENING AND EXITING INTO THE PLAINS DURING DAY 2. SURFACE LOW PRESSURE FORMING IN RESPONSE TO THE MID MOST RECENT WPC QPF. DAY 1... LIFT ASSOCIATED WITH A BROAD POSITIVELY TILTED LONG WAVE TROUGH MOVING
SeaMARC II mapping of transform faults in the Cayman Trough, Caribbean Sea
Rosencrantz, Eric; Mann, Paul
1992-01-01
SeaMARC II maps of the southern wall of the Cayman Trough between Honduras and Jamaica show zones of continuous, well-defined fault lineaments adjacent and parallel to the wall, both to the east and west of the Cayman spreading axis. These lineaments mark the present, active traces of transform faults which intersect the southern end of the spreading axis at a triple junction. The Swan Islands transform fault to the west is dominated by two major lineaments that overlap with right-stepping sense across a large push-up ridge beneath the Swan Islands. The fault zone to the east of the axis, named the Walton fault, is more complex, containing multiple fault strands and a large pull-apart structure. The Walton fault links the spreading axis to Jamaican and Hispaniolan strike-slip faults, and it defines the southern boundary of a microplate composed of the eastern Cayman Trough and western Hispaniola. The presence of this microplate raises questions about the veracity of Caribbean plate velocities based primarily on Cayman Trough opening rates.
Ionospheric and magnetospheric plasmapauses'
NASA Technical Reports Server (NTRS)
Grebowsky, J. M.; Hoffman, J. H.; Maynard, N. C.
1977-01-01
During August 1972, Explorer 45 orbiting near the equatorial plane with an apogee of about 5.2 R sub e traversed magnetic field lines in close proximity to those simultaneously traversed by the topside ionospheric satellite ISIS 2 near dusk in the L range 2-5.4. The locations of the Explorer 45 plasmapause crossings during this month were compared to the latitudinal decreases of the H(+) density observed on ISIS 2 near the same magnetic field lines. The equatorially determined plasmapause field lines typically passed through or poleward of the minimum of the ionospheric light ion trough, with coincident satellite passes occurring for which the L separation between the plasmapause and trough field lines was between 1 and 2. Vertical flows of the H(+) ions in the light ion trough as detected by the magnetic ion mass spectrometer on ISIS were directed upward with velocities between 1 and 2 kilometers/sec near dusk on these passes. These velocities decreased to lower values on the low latitude side of the H(+) trough but did not show any noticeable change across the field lines corresponding to the magnetospheric plasmapause.
NASA Technical Reports Server (NTRS)
Kocin, P. J.; Uccellini, L. W.
1985-01-01
Surface and upper-level characteristics of selected meteorological fields are summarized. Two major types of sea level development are described and applied to the cases at hand, with a few storm systems showing characteristics of both types. Aspects such as rapid sea level deepening, coastal frontogenesis, cold air damming, low level jet formation, the development of an S-shaped isotherm pattern, diffluence downwind of a negatively tilted upper level trough axis, upper level confluence and an increase of geopotential heights at the base of the upper level trough characterized the pre-cyclogenetic and cyclogenetic periods of many of the storm systems. Large variability was also observed, especially with regard to the spatial dimensions of the surface and upper level systems, as well as variations in trough/ridge amplification and the evolution of upper level jet streak systems. The influence of transverse circulations associated with a confluent jet streak entrance region and the diffluent exit region of a jet streak/trough system on the production of snowfall is also discussed.
Far-Field Noise Induced by Bubble near Free Surface
NASA Astrophysics Data System (ADS)
Ye, Xi; Li, Jiang-tao; Liu, Jian-hua; Chen, Hai-long
2018-03-01
The motion of a bubble near the free surface is solved by the boundary element method based on the linear wave equation, and the influence of fluid compressibility on bubble dynamics is analyzed. Based on the solution of the bubble motion, the far-field radiation noise induced by the bubble is calculated using Kirchhoff moving boundary integral equation, and the influence of free surface on far-field noise is researched. As the results, the oscillation amplitude of the bubble is weakened in compressible fluid compared with that in incompressible fluid, and the free surface amplifies the effect of fluid compressibility. When the distance between the bubble and an observer is much larger than that between the bubble and free surface, the sharp wave trough of the sound pressure at the observer occurs. With the increment of the distance between the bubble and free surface, the time of the wave trough appearing is delayed and the value of the wave trough increase. When the distance between the observer and the bubble is reduced, the sharp wave trough at the observer disappears.
Element for use in an inductive coupler for downhole drilling components
Hall, David R.; Hall, Jr., H. Tracy; Pixton, David S.; Dahlgren, Scott; Fox, Joe; Sneddon, Cameron
2006-08-29
The present invention includes an element for use in an inductive coupler in a downhole component. The element includes a plurality of ductile, generally U-shaped leaves that are electrically conductive. The leaves are less than about 0.0625" thick and are separated by an electrically insulating material. These leaves are aligned so as to form a generally circular trough. The invention also includes an inductive coupler for use in downhole components, the inductive coupler including an annular housing having a recess with a magnetically conductive, electrically insulating (MCEI) element disposed in the recess. The MCEI element includes a plurality of segments where each segment further includes a plurality of ductile, generally U-shaped electrically conductive leaves. Each leaf is less than about 0.0625" thick and separated from the otherwise adjacent leaves by electrically insulating material. The segments and leaves are aligned so as to form a generally circular trough. The inductive coupler further includes an insulated conductor disposed within the generally circular trough. A polymer fills spaces between otherwise adjacent segments, the annular housing, insulated conductor, and further fills the circular trough.
Time-Frequency Variability of Kuroshio Meanders in Tokara Strait
NASA Astrophysics Data System (ADS)
Nakamura, H.; Yamashiro, T.; Nishina, A.; Ichikawa, H.
2006-12-01
The Kuroshio path in the northern Okinawa Trough, Japan, located between the continental slope and Tokara Strait, exhibits meandering motions with largest displacements in the East China Sea; these motions have dominant periods in the broad range of 30-90 days. Understanding the dynamic nature of such meanders is crucial to predicting small and large meanders of the Kuroshio path off the south coast of Japan. Previous numerical simulations suggest that the Kuroshio path meanders in the northern Okinawa Trough become nonstationary in variance because of changes in background states of the Kuroshio in the northern Okinawa Trough, but a detailed analysis based on observed data has yet to be performed. The purpose of the present study is to provide a detailed description of the time-frequency variability of Kuroshio path meanders observed in Tokara Strait. Three Kuroshio indicators were subjected to wavelet analysis for the period 1984-2004: the Kuroshio Position Index (KPI) in Tokara Strait, Kuroshio Volume Transport (KVT) in Tokara Strait, and the basal current velocity of the Kuroshio on the continental slope in the northern Okinawa Trough. The 30-90 day variance of the KPI shows a season-fixed nature, with larger amplitudes in the period December-July. The amplitude of the variance in this phenomenon is also modulated by interannual variations, with small variance recorded during 1989-1992, large variance during 1993-1998, and a return to small variance from 1999-2003. This interannual variation is positively correlated with that of the KVT. The largest variance of the KPI during February-April precedes the largest volume transport in April-May by about 1 month, suggesting that eddy vorticity flux strengthens the mean current field. Previous numerical simulations reproduce the recirculation gyre as a cyclonic eddy in the area between the continental slope and Tokara Strait; this gyre is analogous to the northern recirculation gyre associated with the eastward jet. On the basis of data from a moored current-meter situated on the continental slope, the genesis of the 30-90 day meanders within Tokara Strait is ascribed to nonlinear energy transfer from 8-25 day meanders on the continental slope.
Rich, David Q; Rhoads, George G; Yiin, Lih-Ming; Zhang, Junfeng; Bai, Zhipeng; Adgate, John L; Ashley, Peter J; Lioy, Paul J
2002-01-01
High efficiency particulate air filter (HEPA) vacuums, which collect particles > 0.3 micro m, and trisodium phosphate (TSP), a detergent claimed to selectively remove lead, have been included in the HUD Guidelines for the Evaluation and Control of Lead Based Paint Hazards in Housing without systematic validation of their effectiveness. At the time the study was initiated, both HEPA vacuums and TSP were relatively expensive, they were not readily found in urban retail centers, and there were environmental concerns about the use and disposal of high-phosphate detergents. A randomized, controlled trial was conducted in urban high-risk homes in northern New Jersey to determine whether a more readily available and less expensive low-phosphate, non-TSP detergent and non-HEPA vacuum could perform as well as TSP and a HEPA vacuum in a cleaning protocol. Homes were randomized to one of three cleaning methods: TSP/HEPA vacuum, TSP/non-HEPA vacuum, or non-TSP/non-HEPA vacuum. Change in log-transformed lead loading was used in mixed models to compare the efficacy of the three cleaning techniques separately for uncarpeted floors, window sills, and window troughs. After we adjusted for baseline lead loading, the non-HEPA vacuum produced larger reductions on hard floors [19%; 95% confidence interval (CI), 3-38%], but the HEPA vacuum produced larger reductions on window sills (22%; 95% CI, 11-32%) and larger reductions on window troughs (16%; 95% CI, -4 to 33%). The non-TSP produced larger reductions on window troughs (21%; 95% CI, -2 to 50%), but TSP produced larger reductions on hard floors (5%; 95% CI, -12 to 19%) and window sills (8%; 95% CI, -5 to 20%). TSP/HEPA produced larger reductions on window sills (28%; 95% CI, 18-37%) and larger reductions on window troughs (2%; 95% CI, -24 to 23%), whereas the non-TSP/non-HEPA method produced larger reductions on hard floors (13%; 95% CI, -5 to 34%). Because neither vacuum nor detergent produced consistent results across surface types, the use of low-phosphate detergents and non-HEPA vacuums in a temporary control measure is supported. PMID:12204823
Rich, David Q; Rhoads, George G; Yiin, Lih-Ming; Zhang, Junfeng; Bai, Zhipeng; Adgate, John L; Ashley, Peter J; Lioy, Paul J
2002-09-01
High efficiency particulate air filter (HEPA) vacuums, which collect particles > 0.3 micro m, and trisodium phosphate (TSP), a detergent claimed to selectively remove lead, have been included in the HUD Guidelines for the Evaluation and Control of Lead Based Paint Hazards in Housing without systematic validation of their effectiveness. At the time the study was initiated, both HEPA vacuums and TSP were relatively expensive, they were not readily found in urban retail centers, and there were environmental concerns about the use and disposal of high-phosphate detergents. A randomized, controlled trial was conducted in urban high-risk homes in northern New Jersey to determine whether a more readily available and less expensive low-phosphate, non-TSP detergent and non-HEPA vacuum could perform as well as TSP and a HEPA vacuum in a cleaning protocol. Homes were randomized to one of three cleaning methods: TSP/HEPA vacuum, TSP/non-HEPA vacuum, or non-TSP/non-HEPA vacuum. Change in log-transformed lead loading was used in mixed models to compare the efficacy of the three cleaning techniques separately for uncarpeted floors, window sills, and window troughs. After we adjusted for baseline lead loading, the non-HEPA vacuum produced larger reductions on hard floors [19%; 95% confidence interval (CI), 3-38%], but the HEPA vacuum produced larger reductions on window sills (22%; 95% CI, 11-32%) and larger reductions on window troughs (16%; 95% CI, -4 to 33%). The non-TSP produced larger reductions on window troughs (21%; 95% CI, -2 to 50%), but TSP produced larger reductions on hard floors (5%; 95% CI, -12 to 19%) and window sills (8%; 95% CI, -5 to 20%). TSP/HEPA produced larger reductions on window sills (28%; 95% CI, 18-37%) and larger reductions on window troughs (2%; 95% CI, -24 to 23%), whereas the non-TSP/non-HEPA method produced larger reductions on hard floors (13%; 95% CI, -5 to 34%). Because neither vacuum nor detergent produced consistent results across surface types, the use of low-phosphate detergents and non-HEPA vacuums in a temporary control measure is supported.
Hydrocarbon prospectivity assessment of the Southern Pattani Trough, Gulf of Thailand
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mountford, N.
The Pattani Trough is an elongate north to south basin in the Gulf of Thailand offshore area that developed from Oligocene times onward. Numerous hydrocarbon discoveries, mainly gas, have been made within the Tertiary stratigraphic section in areas adjacent to the depocenter of the basin, but only dry holes have been drilled on the extreme basin margins and flanking platform areas. The southern Pattani Trough represents a [open quotes]transition zone[close quotes] in terms of potential hydrocarbon prospectivity between the low potential/high exploration risk basin marginal areas, and the high potential/low exploration risk basin marginal area. The development of hydrocarbon accumulationmore » potential within the southern Pattani Trough can be related to a number of major controlling factors. These include structure, which on a regional scale shows a marked influence of tectonic regime on depositional system development, and on a more local scale determines trap development; stratigraphy, which determines reservoir geometry and potential hydrocarbon source rock facies distribution; petrology, which exerts a major control on depth related reservoir quality; overpressure development, which controls local migration pathways for generated hydrocarbons, and locally provides very efficient trap seals; geochemical factors, related to potential source facies distribution, hydrocarbon type; and thermal maturation of the section. The above factors have been combined to define low-, medium-, and high-risk exploration [open quotes]play fairways[close quotes] within the prospectivity transition zone of the southern Pattani Trough.« less
Crustal structure and extension mode in the northwestern margin of the South China Sea
NASA Astrophysics Data System (ADS)
Gao, Jinwei; Wu, Shiguo; McIntosh, Kirk; Mi, Lijun; Liu, Zheng; Spence, George
2016-06-01
Combining multi-channel seismic reflection and gravity modeling, this study has investigated the crustal structure of the northwestern South China Sea margin. These data constrain a hyper-extended crustal area bounded by basin-bounding faults corresponding to an aborted rift below the Xisha Trough with a subparallel fossil ridge in the adjacent Northwest Sub-basin. The thinnest crust is located in the Xisha Trough, where it is remnant lower crust with a thickness of less than 3 km. Gravity modeling also revealed a hyper-extended crust across the Xisha Trough. The postrift magmatism is well developed and more active in the Xisha Trough and farther southeast than on the northwestern continental margin of the South China Sea; and the magmatic intrusion/extrusion was relatively active during the rifting of Xisha Trough and the Northwest Sub-basin. A narrow continent-ocean transition zone with a width of ˜65 km bounded seaward by a volcanic buried seamount is characterized by crustal thinning, rift depression, low gravity anomaly and the termination of the break-up unconformity seismic reflection. The aborted rift near the continental margin means that there may be no obvious detachment fault like that in the Iberia-Newfoundland type margin. The symmetric rift, extreme hyper-extended continental crust and hotter mantle materials indicate that continental crust underwent stretching phase (pure-shear deformation), thinning phase and breakup followed by onset of seafloor spreading and the mantle-lithosphere may break up before crustal-necking in the northwestern South China Sea margin.
NASA Astrophysics Data System (ADS)
Agel, Laurie; Barlow, Mathew; Feldstein, Steven B.; Gutowski, William J.
2018-03-01
Patterns of daily large-scale circulation associated with Northeast US extreme precipitation are identified using both k-means clustering (KMC) and Self-Organizing Maps (SOM) applied to tropopause height. The tropopause height provides a compact representation of the upper-tropospheric potential vorticity, which is closely related to the overall evolution and intensity of weather systems. Extreme precipitation is defined as the top 1% of daily wet-day observations at 35 Northeast stations, 1979-2008. KMC is applied on extreme precipitation days only, while the SOM algorithm is applied to all days in order to place the extreme results into the overall context of patterns for all days. Six tropopause patterns are identified through KMC for extreme day precipitation: a summertime tropopause ridge, a summertime shallow trough/ridge, a summertime shallow eastern US trough, a deeper wintertime eastern US trough, and two versions of a deep cold-weather trough located across the east-central US. Thirty SOM patterns for all days are identified. Results for all days show that 6 SOM patterns account for almost half of the extreme days, although extreme precipitation occurs in all SOM patterns. The same SOM patterns associated with extreme precipitation also routinely produce non-extreme precipitation; however, on extreme precipitation days the troughs, on average, are deeper and the downstream ridges more pronounced. Analysis of other fields associated with the large-scale patterns show various degrees of anomalously strong moisture transport preceding, and upward motion during, extreme precipitation events.
Large-Scale Meteorological Patterns Associated with Extreme Precipitation in the US Northeast
NASA Astrophysics Data System (ADS)
Agel, L. A.; Barlow, M. A.
2016-12-01
Patterns of daily large-scale circulation associated with Northeast US extreme precipitation are identified using both k-means clustering (KMC) and Self-Organizing Maps (SOM) applied to tropopause height. Tropopause height provides a compact representation of large-scale circulation patterns, as it is linked to mid-level circulation, low-level thermal contrasts and low-level diabatic heating. Extreme precipitation is defined as the top 1% of daily wet-day observations at 35 Northeast stations, 1979-2008. KMC is applied on extreme precipitation days only, while the SOM algorithm is applied to all days in order to place the extreme results into a larger context. Six tropopause patterns are identified on extreme days: a summertime tropopause ridge, a summertime shallow trough/ridge, a summertime shallow eastern US trough, a deeper wintertime eastern US trough, and two versions of a deep cold-weather trough located across the east-central US. Thirty SOM patterns for all days are identified. Results for all days show that 6 SOM patterns account for almost half of the extreme days, although extreme precipitation occurs in all SOM patterns. The same SOM patterns associated with extreme precipitation also routinely produce non-extreme precipitation; however, on extreme precipitation days the troughs, on average, are deeper and the downstream ridges more pronounced. Analysis of other fields associated with the large-scale patterns show various degrees of anomalously strong upward motion during, and moisture transport preceding, extreme precipitation events.
NASA Astrophysics Data System (ADS)
Hui, Pinhong; Fang, Juan
2016-06-01
Two persistent heavy rainfall (PHR) events in the middle and lower reaches of Yangtze River (MLYR) occurring in June 1982 and 1998 are studied in this paper. Though both events happened in the Meiyu season, their large-scale background and developing processes were quite different. During the PHR event in 1982, the Lake Baikal area was occupied by a strong westerly trough and the western Pacific subtropical high (WPSH) was stronger and more westward-extending than the normal years. Under such a condition, the cold-dry air and warm-moist air were continuously transported to the MLYR and favored the PHR there. For the event in 1998, the WPSH was similar to that in 1982, while the westerly trough in the Lake Baikal area was comparatively weak and a shortwave trough situating in East China contributed to advect cold-dry air to the MLYR. It is found that the high-latitude trough was closely related to the 10-30-day low-frequency oscillation while the anomaly of WPSH was linked with the combined effect of both 30-60- and 10-30-day low-frequency oscillations in the PHR event in 1982. By contrast, the 60-day low-pass perturbation demonstrated positive impact on the westward extension of WPSH and development of the Baikal trough while the 30-60-day oscillation played a role in strengthening the shortwave trough in East China and the WPSH in the case of 1998. Though the low-latitude 30-60-day oscillations contributed to the intensification and westward extension of the WPSH in both PHR events, their evolution exhibited evident differences. In the 1982 case, the 30-60-day anomalies originated from the western Indian Ocean were much more like the Madden-Julian Oscillation, while its counterpart in the 1998 case was much more similar to the first mode of the boreal summer intraseasonal oscillation.
Late Weichselian ice-sheet dynamics and deglaciation history of the northern Svalbard margin
NASA Astrophysics Data System (ADS)
Fransner, O.; Noormets, R. R. N. N.; Flink, A.; Hogan, K.; Dowdeswell, J. A.; O'Regan, M.; Jakobsson, M.
2016-12-01
The glacial evolution of the northern Svalbard margin is poorly known compared with the western margin. Gravity cores, swath bathymetric, sub-bottom acoustic and 2D airgun data are used to investigate the Late Weichselian Svalbard-Barents Ice Sheet history on the northern Svalbard margin. Prograding sequences in Kvitøya and Albertini trough mouths (TMs) indicate ice streaming to the shelf edge multiple times during the Quaternary. While Kvitøya Trough has an associated trough-mouth fan (TMF), Albertini TM is cut back into the shelf edge. Down-faulted bedrock below Albertini TM suggests larger sediment accommodation space there, explaining the absence of a TMF. The bathymetry indicates that ice flow in Albertini Trough was sourced from Duvefjorden and Albertinibukta. Exposed crystalline bedrock likely kept the two ice flows separated before merging north of Karl XII-Øya. Subglacial landforms in Rijpfjorden and Duvefjorden indicate that both fjords accommodated northward-flowing ice streams during the LGM. The deeper fjord basin and higher elongation ratios of landforms in Duvefjorden suggest a more focused and/or larger ice flow there. Easily erodible sedimentary rocks are common in Duvefjorden, which may explain different ice flow dynamics in these fjords. Kvitøya TMF is flanked by gullies, probably formed through erosive downslope gravity flows triggered by sediment-laden meltwater during early deglaciation. Glacial landforms in Albertini Trough comprise retreat-related landforms indicating slow deglaciation. Iceberg scours in Albertini Trough suggest the importance of calving for mass-loss. Sets of De Geer moraines in Rijpfjorden imply that slow, grounded retreat continued in <210 m water depth. Lack of retreat-related landforms in deeper areas of Rijpfjorden and in Duvefjorden indicates floating glacier fronts influenced by calving. 14C ages suggest that deglaciation of inner Rijpfjorden and central Duvefjorden were complete before 10,434 cal a BP and 10,779 cal a BP respectively.
Finch, Natalie A.; Zasowski, Evan J.; Murray, Kyle P.; Mynatt, Ryan P.; Zhao, Jing J.; Yost, Raymond; Pogue, Jason M.
2017-01-01
ABSTRACT Evidence suggests that maintenance of vancomycin trough concentrations at between 15 and 20 mg/liter, as currently recommended, is frequently unnecessary to achieve the daily area under the concentration-time curve (AUC24) target of ≥400 mg · h/liter. Many patients with trough concentrations in this range have AUC24 values in excess of the therapeutic threshold and within the exposure range associated with nephrotoxicity. On the basis of this, the Detroit Medical Center switched from trough concentration-guided dosing to AUC-guided dosing to minimize potentially unnecessary vancomycin exposure. The primary objective of this analysis was to assess the impact of this intervention on vancomycin-associated nephrotoxicity in a single-center, retrospective quasi-experiment of hospitalized adult patients receiving intravenous vancomycin from 2014 to 2015. The primary analysis compared the incidence of nephrotoxicity between patients monitored by assessment of the AUC24 and those monitored by assessment of the trough concentration. Multivariable logistic and Cox proportional hazards regression examined the independent association between the monitoring strategy and nephrotoxicity. Secondary analysis compared vancomycin exposures (total daily dose, AUC, and trough concentrations) between monitoring strategies. Overall, 1,280 patients were included in the analysis. After adjusting for severity of illness, comorbidity, duration of vancomycin therapy, and concomitant receipt of nephrotoxins, AUC-guided dosing was independently associated with lower nephrotoxicity by both logistic regression (odds ratio, 0.52; 95% confidence interval [CI], 0.34 to 0.80; P = 0.003) and Cox proportional hazards regression (hazard ratio, 0.53; 95% CI, 0.35 to 0.78; P = 0.002). AUC-guided dosing was associated with lower total daily vancomycin doses, AUC values, and trough concentrations. Vancomycin AUC-guided dosing was associated with reduced nephrotoxicity, which appeared to be a result of reduced vancomycin exposure. PMID:28923869
Fukumori, S; Tsuji, Y; Mizoguchi, A; Kasai, H; Ishibashi, T; Iwamura, N; To, H
2016-08-01
The pharmacokinetic-pharmacodynamic parameter that best predicts the efficacy of vancomycin is the ratio of the area under the concentration versus time curve (AUC) to the minimum inhibitory concentration (MIC). A 24-h AUC (AUC24 )/MIC ratio ≥ 400 was recommended in an American consensus review, but vancomycin treatment occasionally fails despite maintenance of AUC24 /MIC ≥ 400. We evaluated the association between clinical efficacy of vancomycin and two novel pharmacokinetic parameters, the 'area under the trough level' (AUTL) and the 'area above the trough level' (AATL), in hospitalized elderly patients with methicillin-resistant Staphylococcus aureus (MRSA) pneumonia. The subjects were hospitalized elderly patients who were administered vancomycin for treatment of MRSA pneumonia between 2006 and 2012 at Sasebo Chuo Hospital (Nagasaki, Japan). Pharmacokinetic parameters of vancomycin were estimated for each patient by Bayesian analysis using population pharmacokinetic parameters for Japanese patients. Based on the patient-specific parameters thus obtained, AUC24 values were calculated as the vancomycin dosage divided by vancomycin clearance. AUTL was calculated as the trough serum concentration multiplied by 24 h, whereas AATL was calculated by subtracting AUTL from AUC24 . Logistic regression analysis demonstrated that efficacy of vancomycin was more strongly associated with AUTL than AUC24 . The optimal cut-off value of AUTL was 331 μg∙h/mL, which means that the optimal cut-off value of the trough serum concentration was 13·8 μg/mL. Efficacy of vancomycin was associated with AUTL, a novel pharmacokinetic parameter. Determining the target AUTL or trough concentration may enhance the efficacy of vancomycin therapy in elderly patients with MRSA pneumonia. Given that nephrotoxicity may increase with a Ctrough in excess of 15 μg/mL, this level should ideally not be exceeded. © 2016 John Wiley & Sons Ltd.
Effect of raltegravir on the total and unintegrated proviral HIV DNA during raltegravir-based HAART.
Nicastri, Emanuele; Tommasi, Chiara; Abbate, Isabella; Bonora, Stefano; Tempestilli, Massimo; Bellagamba, Rita; Viscione, Magdalena; Rozera, Gabriella; Gallo, Anna L; Ivanovic, Jelena; Amendola, Alessandra; Pucillo, Leopoldo; Di Perri, Giovanni; Capobianchi, Maria R; Narciso, Pasquale
2011-01-01
Raltegravir is the first approved antiretroviral able to prevent HIV genome integration into the host chromosomes. The aim of the study is to test if raltegravir plasma concentrations can be associated with proviral DNA decline during raltegravir-based salvage therapy. A total of 33 multidrug-resistant HIV-infected patients were enrolled in a longitudinal open-label pilot study and completed a 24-week follow-up. The CD4(+) T-cell count, plasma viral load, proviral HIV DNA and two-long-terminal repeat (2-LTR) circular forms were assessed at baseline, day 14, 30, 60, 90 and 180. The raltegravir trough concentration (C (trough)) was measured by HPLC-ultraviolet and patients were divided into two groups according to the median raltegravir C (trough). The mean±SD values of baseline HIV RNA, CD4(+) T-cell count and HIV DNA were 4.4±0.82 log copies/ml, 256±177 cells/mm(3) , and 2,668±4,721 copies/10(6) peripheral blood mononuclear cells, respectively. Despite a transient increase of total DNA at week 2, a marked proviral DNA decay (P=0.01) with an increase of the 2-LTR unintegrated/total DNA ratio (P=0.06) over time was observed. At univariate analysis, no correlation between raltegravir C(trough) and classical virological parameters was observed. Nevertheless, the decay of proviral HIV DNA was more pronounced in patients displaying C(trough)<158 ng/ml with respect to those with C(trough)>158 ng/ml (P=0.046). Successful raltegravir-based therapy produces a significant decline in proviral DNA and is associated with an increase of the unintegrated/total DNA ratio. Further studies are necessary to define the possible role of pharmacokinetic raltegravir monitoring and the biological meaning of unintegrated proviral DNA. © 2011 International Medical Press
Finch, Natalie A; Zasowski, Evan J; Murray, Kyle P; Mynatt, Ryan P; Zhao, Jing J; Yost, Raymond; Pogue, Jason M; Rybak, Michael J
2017-12-01
Evidence suggests that maintenance of vancomycin trough concentrations at between 15 and 20 mg/liter, as currently recommended, is frequently unnecessary to achieve the daily area under the concentration-time curve (AUC 24 ) target of ≥400 mg · h/liter. Many patients with trough concentrations in this range have AUC 24 values in excess of the therapeutic threshold and within the exposure range associated with nephrotoxicity. On the basis of this, the Detroit Medical Center switched from trough concentration-guided dosing to AUC-guided dosing to minimize potentially unnecessary vancomycin exposure. The primary objective of this analysis was to assess the impact of this intervention on vancomycin-associated nephrotoxicity in a single-center, retrospective quasi-experiment of hospitalized adult patients receiving intravenous vancomycin from 2014 to 2015. The primary analysis compared the incidence of nephrotoxicity between patients monitored by assessment of the AUC 24 and those monitored by assessment of the trough concentration. Multivariable logistic and Cox proportional hazards regression examined the independent association between the monitoring strategy and nephrotoxicity. Secondary analysis compared vancomycin exposures (total daily dose, AUC, and trough concentrations) between monitoring strategies. Overall, 1,280 patients were included in the analysis. After adjusting for severity of illness, comorbidity, duration of vancomycin therapy, and concomitant receipt of nephrotoxins, AUC-guided dosing was independently associated with lower nephrotoxicity by both logistic regression (odds ratio, 0.52; 95% confidence interval [CI], 0.34 to 0.80; P = 0.003) and Cox proportional hazards regression (hazard ratio, 0.53; 95% CI, 0.35 to 0.78; P = 0.002). AUC-guided dosing was associated with lower total daily vancomycin doses, AUC values, and trough concentrations. Vancomycin AUC-guided dosing was associated with reduced nephrotoxicity, which appeared to be a result of reduced vancomycin exposure. Copyright © 2017 American Society for Microbiology.
NASA Astrophysics Data System (ADS)
Huang, Ling; Luo, Yali; Zhang, Da-Lin
2018-04-01
A spectral analysis of daily rainfall data has been performed to investigate extreme rainfall events in south China during the presummer rainy seasons between 1998 and 2015 (excluding 1999, 2006, 2011, and 2014). The results reveal a dominant frequency mode at the synoptic scale with pronounced positive rainfall anomalies. By analyzing the synoptic-scale bandpass-filtered anomalous circulations, 24 extreme rainfall episodes (defined as those with a daily rainfall amount in the top 5%) are categorized into "cyclone" (15) and "trough" (8) types, with the remaining events as an "anticyclone" type, according to the primary anomalous weather system contributing to each extreme rainfall episode. The 15 cyclone-type episodes are further separated into (11) lower- and (4) upper-tropospheric migratory anomalies. An analysis of their anomalous fields shows that both types could be traced back to the generation of cyclonic anomalies downstream of the Tibetan Plateau, except for two episodes of lower-tropospheric migratory anomalies originating over the South China Sea. However, a lower-tropospheric cyclonic anomaly appears during all phases in the former type, but only in the wettest phase in the latter type, with its peak disturbance occurring immediately beneath an upper-level warm anomaly. The production of extreme rainfall in the trough-type episodes is closely related to a deep trough anomaly extending from an intense cyclonic anomaly over north China, which in turn could be traced back to a midlatitude Rossby wave train passing by the Tibetan Plateau. The results have important implications for understanding the origin, structure, and evolution of synoptic disturbances associated with the presummer extreme rainfall in south China.
Karlson, Björn W; Dellborg, Mikael; Gullestad, Lars; Aberg, Jan; Sugg, Jennifer; Herlitz, Johan
2014-01-01
Previous metoprolol studies in myocardial infarction patients were performed with immediate-release (IR) metoprolol. This study aims to evaluate if extended-release metoprolol CR/XL once daily gives a similar β-blockade over 24 h compared to multiple dosing of metoprolol IR. After 2 days of routine metoprolol treatment, 27 patients with suspected acute myocardial infarction were randomized to open-label treatment with metoprolol IR (50 mg four times daily or 100 mg twice daily) or metoprolol CR/XL 200 mg once daily for 3 days. Metoprolol CR/XL 200 mg once daily gave more pronounced suppression of peak heart rate, with lower peak and less variation in peak to trough plasma levels. There were no differences in AUC between the CR/XL and IR formulations, although the trough plasma metoprolol levels were comparable for metoprolol CR/XL 200 mg once daily and metoprolol IR 50 mg four times daily, but lower for metoprolol IR 100 mg twice daily. Both treatments were well tolerated. Metoprolol CR/XL 200 mg once daily showed lower peak and less variation in peak to trough plasma levels compared to multiple dosing of metoprolol IR with the same AUC. This was accompanied by a more uniform β-blockade over time, which was reflected by heart rate, and a more pronounced suppression of peak heart rate with similar tolerability. This suggests metoprolol CR/XL may be used as an alternative to metoprolol IR in patients with myocardial infarction. © 2013 S. Karger AG, Basel.
NASA Technical Reports Server (NTRS)
2002-01-01
[figure removed for brevity, see original site] The style of erosion along the highlands-lowlands boundary of southern Elysium Planitia has produced a strange pattern of troughs that look like the skin of a reptile. In reality, a very clear process of landscape degradation is evident in this image. Some process has produced polygon-shaped troughs that create zones of weakness in the uppermost crust. It is likely that wind-blown particles deepen and widen the troughs, producing isolated knobs and mesas. Ultimately, the erosional reworking of the landscape is so complete that all signs of the upper layer are removed, leaving the smooth lowland surface to the north.Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.Drobne, David; Bossuyt, Peter; Breynaert, Christine; Cattaert, Tom; Vande Casteele, Niels; Compernolle, Griet; Jürgens, Matthias; Ferrante, Marc; Ballet, Vera; Wollants, Willem-Jan; Cleynen, Isabelle; Van Steen, Kristel; Gils, Ann; Rutgeerts, Paul; Vermeire, Severine; Van Assche, Gert
2015-03-01
The addition of immunomodulators increases the efficacy of maintenance therapy with infliximab for up to 1 year in patients with Crohn's disease who have not been previously treated with immunomodulators. However, there are questions about the effect of withdrawing immunomodulator therapy from these patients. We studied the effects of treatment with infliximab and immunomodulators (co-treatment) and then immunomodulator withdrawal on long-term outcomes of patients, as well as trough levels of infliximab and formation of anti-infliximab antibodies (ATI). In a retrospective study with the median follow-up period of 34 months (interquartile range, 19-58 months), we analyzed data from 223 patients treated for Crohn's disease between May 1999 and December 2010 at the University Hospitals, Leuven, Belgium (65 received infliximab monotherapy, 158 received infliximab and an immunomodulator). Trough levels of infliximab and levels of ATI were measured in blood samples collected from 117 patients throughout co-treatment, as well as the time of immunomodulator withdrawal and after withdrawal. Patients receiving co-treatment had higher trough levels of infliximab (adjusted mean increase, 1.44-fold) than those receiving infliximab monotherapy (95% confidence interval [CI], 1.07-1.92; P = .02). A smaller percentage of patients receiving co-treatment developed ATI (35 of 158, 22%) than those receiving infliximab monotherapy (25 of 65, 38%; P = .01). Among co-treated patients, levels of infliximab remained stable after immunomodulators were withdrawn (before: 3.2 μg/mL; 95% CI, 1.6-5.8 μg/mL and after: 3.7 μg/mL; 95% CI, 1.3-6.3 μg/mL; P = .70). After withdrawal of immunomodulators, 45 of 117 patients (38%) required increasing doses of infliximab, and 21 of 117 (18%) discontinued infliximab. At the time of immunomodulator withdrawal, trough levels of infliximab and C-reactive protein were most strongly associated with response to infliximab thereafter. In a retrospective analysis, we confirmed that withdrawal of immunomodulators after at least 6 months (median, 13 months) of co-treatment with infliximab does not reduce the trough levels of infliximab in patients with Crohn's disease. Detectable trough levels of infliximab at the time of immunomodulator withdrawal are associated with long-term response. Copyright © 2015 AGA Institute. Published by Elsevier Inc. All rights reserved.
NASA Astrophysics Data System (ADS)
Yamashita, M.; Nakanishi, A.; Moore, G. F.; Kodaira, S.; Nakamura, Y.; Miura, S.; Kaneda, Y.
2016-12-01
Great earthquakes with tsunamis with recurrence intervals of 100-200 years have occurred along the Nankai Trough near central Japan where the Shikoku Basin is subducting with thick sediments on the Philippine Sea plate. To predict the exact height of the tsunami on the coast region generated by these large ruptures, it is important to estimate the vertical deformation that occurs on the seaward end of the rupture area. Recent drilling results have also yielded evidence not only of splay faults that generate tsunamigenic rupture, but also new evidence of tsunamigenic rupture along the frontal thrust at the trench axis in the Nankai Trough. In order to understand the deformation around the frontal thrust at the trench axis, we conducted a dense high-resolution seismic reflection survey with 10-20 km spacing over 1500 km of line length during 2013 and 2014. Clear seismic reflection images of frontal thrusts in the accretionary prism and subducting Shikoku Basin, image deformation along the trench axis between off Muroto Cape and off Ashizuri Cape. The cumulative displacement along the frontal thrust and second thrust are measured from picked distinct reflectors in depth-converted profiles. The average value of cumulative displacement of the frontal thrust is more than 100 m within 2 km depth beneath the seafloor. The location of highest displacement of 300 m displacement agree with the seaward end of slip distribution of the 1946 Nankai event calculated by numerical simulations. We also evaluate the seaward structure for understanding the future rupture distribution. The protothrust zone (PTZ) consisting of many incipient thrusts is identifiable in the portion of trough-fill sediments seaward of the frontal thrust. In order to emphasize the characteristics of frontal thrust and PTZ, we construct the detailed relief image for focusing on the lineated slope of the PTZ at the trough axis. Although our surveys covered a part of Nankai seismogenic zone, it is important to evaluate the initiation and evolution of frontal thrust at the toe of Nankai trough axis. This study is part of "Research project for compound disaster mitigation on the great earthquakes and tsunamis around the Nankai Trough region" funded by the Ministry of Education, Culture, Sports, Science, and Technology of Japan.
NASA Astrophysics Data System (ADS)
Sasaki, T.; Lim, J.; Higashi, M.; Park, J.
2010-12-01
The Nankai Trough is known as one of the best-suited convergent plate margins for studying accretionary prism growth as well as subduction zone earthquakes. Along the Nankai accretionary margin off southwest Japan, the Shikoku Basin which formed 26-15 Ma as backarc spreading in the Philippine Sea Plate is being subducted about 4 cm/year to the northwest. The Deep Sea Drilling Project (DSDP) and Ocean Drilling Program (ODP) penetrated the Nankai accretionary prism and the incoming sedimentary section along the Ashizuri and Muroto transects, off Shikoku Island. Also, Integrated Ocean Drilling Program (IODP), which represented just one part of a multi-stage project known as the Nankai Trough Seismogenic Zone Experiment (NanTroSEIZE) has been conducting drilling cruises now. IODP Expedition 322 in 2009, the coring was carried out at two drilling sites on the northern part of the Shikoku Basin in the subducting Philippine Sea plate. One of the major achievements of Expedition 322 is a discovery of late Miocene (10.2-7.6 Ma) tuffaceous and volcaniclastic sandstone layer (Underwood et al., IODP Prel. Rept. 322, 2009) that has not been previously recognized in the Nankai Trough. Based on age and volcanic sand content analysis, these volcaniclastic layers were unique to the Shikoku Basin off Kii Peninsula. The closest source of this volcanic layer was supposed to be the Izu-Bonin arc. Subducted sediments ultimately affect subduction zone geochemistry, thermal structure, and seismogenesis. High porosity of the volcaniclastic sandstone layer suggests the transportation of fluid to the subduction zone, it might affect the initiation and evolution of the decollement zone or plate boundary fault in the Nankai Trough. We interpreted single channel and multichannel seismic reflection profiles that have been acquired in the Nankai Trough margin by Japan Agency for Marine-Earth Science and Technology (JAMSTEC) since the year of 1997. We tried to map the major seismic layers such as volcaniclastic layer, volcanic ash layer and turbidite layers which were found at drilling sites in the IODP Expedition 322 in the northern Shikoku Basin. As a result, we recognized that these prominent seismic layers are widely distributed in the northern Shikoku Basin. In this talk, we will show specific seismic layers directly connecting to the decollement at the Nankai Trough axis, and discuss its implications for subduction processes in the Nankai Trough margin.
NASA Astrophysics Data System (ADS)
Yasuda, K.; Tadokoro, K.; Ikuta, R.; Watanabe, T.; Nagai, S.; Sayanagi, K.
2013-12-01
Observation of seafloor crustal deformation is crucial for megathrust earthquake because most of the focal areas are located below seafloor. Seafloor crustal deformation can be observed GPS/Acoustic technique, and this technique has been carried out at subduction margins in Japan, e.g., Japan Trench, Suruga Trough, and Nankai Trough. At the present, the accuracy of seafloor positioning is one to several centimeters for each epoch. Velocity vectors at seafloor site are estimated through repeated observations. Co- and post- seismic slip distribution and interseismic deformation are estimated from results of seafloor geodetic measurement (e.g., Iinuma et al., 2012; Tadokoro et al., 2012). We repeatedly observed seafloor crustal deformations at two sites across the Suruga Trough from 2005 to investigate interplate locking condition at the focal area of the anticipated megathrust, Tokai, earthquake. We observed 12 and 16 times at an east site of the Suruga Trough (SNE) and at an west site of the Suruga Trough (SNW), respectively. We reinstalled seafloor benchmarks at both sites because of run out of batteries in 2012. We calculated and removed the bias between the old and new seafloor benchmarks. Furthermore, we evaluated two type of analysis. One is Fixed triangular configuration Analysis (FTA). When we determine the seafloor benchmark position, we fix the triangular configuration of seafloor units averaging all the measurements to improve trade-off relation between seafloor benchmark position and sound speed structure. Sound speed structure is assumed to be horizontal layered structure. The other one is Fixed Triangle and Gradient structure of sound speed structure (FTGA). We fixed triangular configuration same as FTA. Sound speed structure is assumed to have gradient structure. Comparing FTA with FTGA, the RMS of horizontal position analyzed through FTA is smaller than that through FTGA at SNE site. On the other hand, the RMS of horizontal position analyzed through FTA is larger than that through FTGA at SNW site. We estimated the displacement velocities with relative to the Amurian plate from the result of repeated observation. The estimated displacement velocity vectors at SNE and SNW are 42×8 mm/y to N94W direction and 46×13 mm/y to N77W direction, respectively. The directions are the same as those measured at the on-land GPS stations. The magnitudes of velocity vector indicate significant shortening by approximately 11 mm/y between SNW and on-land GPS stations at the western part of the Suruga Trough. We also calculated the theoretical surface deformation pattern to depict the interplate locking condition. These results show that the plate interface at the shallow zone of the northernmost Suruga trough is strongly locked.
NASA Astrophysics Data System (ADS)
Alt, Jeffrey C.; Shanks, Wayne C., III; Jackson, Michael C.
1993-10-01
The sulfur contents and sulfur isotopic compositions of 24 glassy submarine volcanics from the Mariana Island Arc and back-arc Mariana Trough were determined in order to investigate the hypothesis that subducted seawater sulfur (delta S-34 = 21 parts per thousand) is recycled through arc volcanism. Our results for sulfur are similar to those for subaerial arc volcanics: Mariana Arc glasses are enriched in S-34(delta S-34 = up to 10.3 parts per thousand, mean = 3.8 parts per thousand) and depleted in S(20-290 ppm, mean = 100 ppm) relative to mid ocean ridge basalt (MORB)(850 ppm S, delta S-34 = 0.1 +/- 0.5 parts per thousand). The bac-arc trough basalts contain 200-930 ppm S and have delta S-34 values of 1.1 +/- 0.5 parts per thousand, which overlap those for the arc and MORB. The low sulfur contents of the arc and some of the trough glasses are attributed to (1) early loss of small amounts of sulfur through separation of immiscible sulfide and (2) later vapor-melt equilibrium control of sulfur contents and loss of sulfur in a vapor phase from sulfide-undersaturated melts near the minimum in sulfur solubility at fO2 is approximately equal to NNO (nickel-nickel oxide). Although these processes removed sulfur from the melts their effects on the sulfur isotopic compositions of the melts were minimal. Positive trends of delta S-34 with Sr-87/Sr-86 large ion lithophile element (LILE) and Light rare earth elements (LREE) contents of the arc volcanics are consistent with a metasomatic seawater sulfur component in the depleted sub-arc mantle source. The lack of a S-34-rich slab signature in the trough lavas may be attributed to equilibration of metasomatic fluid with mantle material along the longer pathway from the slab to the source of the trough volcanics. Sulfur is likely to have been transported into the mantle wedge by metasomatic fluid derived from subducted sediments and pore fluids. Gases extracted from vesicles in arc and back-arc samples are predominantly H2O, with minor CO2 and traces of H2S and SO2.CO2 in the arc and back-arc rocks has delta C-13 values of -2.1 to 13.1 parts per thousand, similar to MORB. These data suggest that degassing of CO2 could explain the slightly lower delta C-13 values for some Mariana Trough volcanic glasses, and that incorporation of subduction-derived organic carbon into the Mariana trough mantle source may not be necessary. More analyses are required to resolve this question, however.
Collison, Jake
2016-04-07
Cannon Air Force Base (Cannon AFB) is located in the High Plains physiographic region of east-central New Mexico, about 5 miles west of Clovis, New Mexico. The area surrounding Cannon AFB is primarily used for agriculture, including irrigated cropland and dairies. The Southern High Plains aquifer is the principal source of water for Cannon AFB, for the nearby town of Clovis, and for local agriculture and dairies. The Southern High Plains aquifer in the vicinity of Cannon AFB consists of three subsurface geological formations: the Chinle Formation of Triassic age, the Ogallala Formation of Tertiary age, and the Blackwater Draw Formation of Quaternary age. The Ogallala Formation is the main water-yielding formation of the Southern High Plains aquifer. Groundwater-supplied, center-pivot irrigation dominates pumping from the Southern High Plains aquifer in the area surrounding Cannon AFB, where the irrigation season typically extends from early March through October. The U.S. Geological Survey has been monitoring groundwater levels in the vicinity of Cannon AFB since 1954 and has developed general potentiometric-surface maps that show groundwater flow from northwest to southeast in the study area. While previous potentiometric-surface maps show the general direction of groundwater flow, a denser well network is needed to show details of groundwater flow at a local scale. Groundwater levels were measured in 93 wells during summer 2013 and 100 wells during winter 2015.The summer and winter potentiometric-surface maps display the presence of what is interpreted to be a groundwater trough trending from the northwest to the southeast through the study area. This groundwater trough may be the hydraulic expression of a Tertiary-age paleochannel. Groundwater north of the trough flows in a southerly direction into the trough, and groundwater south of the trough flows in an easterly direction into the trough.During the 18-month period between summer 2013 and winter 2015, changes in groundwater levels ranged from a rise of 10.0 to a decline of 3.8 feet. The regions to the north and south of the groundwater trough contained the majority of the rises in groundwater levels, whereas the regions within the trough contained the majority of the declines in groundwater levels. In contrast, the long-term groundwater-level trend in wells with 20 to 60 years of record is a steady decline in average annual water levels, with declines ranging from 0.41 to 2.81 feet per year. Overall, the northwestern part of the study area exhibits the smallest average annual declines, while the southeastern part of the study area exhibits the largest average annual declines.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Taylor, B.J.; Huettner, D.A.; Murry, D.
The objective of this study was to provide an economic analysis of the various solar options for Hobbs, New Mexico. In so doing, an assessment of the current state of the art in solar research was obtained. Cost estimates were provided assuming capacity 100 MW. These options were: Central Receiver, Cylindrical Trough, Parabolic Dish Non-Brayton, Parabolic Dish Brayton, Fixed Mirror Distributed Focus, Dispersed Photovoltaic ERDA Goal, and Dispersed Photovoltaic Present Quote. Three scenarios were used to analyze all of the solar options relative to conventional fossil systems and nuclear alternatives. A total of thirty-two different options were considered. Results andmore » conclusions are presented. (MHR)« less
Goeminne, M; Demeulemeester, K; Viaene, N
2011-01-01
In order to make a cost benefit analysis for the management of the potato cyst nematodes Globodera rostochiensis and G. pallida, we developed a method to estimate the relative importance of three basic distribution channels of potato cyst nematodes: seed potatoes, machinery and soil tare. The baseline is determined by the area planted with potatoes, the area infested with potato cysts, the proportion of resistant potato cultivars and the distribution of cysts trough different channels. This quantification forms a basis for the evaluation of the effects of different control measures for potato cyst nematode on a national scale. The method can be useful as an example for application in other countries.
Effect of ketoconazole on cyclosporine dose in healthy dogs.
Dahlinger, J; Gregory, C; Bea, J
1998-01-01
To determine the degree to which the dose of oral cyclosporine (CyA), in healthy dogs, can be decreased by concurrent oral administration of ketoconazole. Dogs in this study were observed for physical or biochemical side effects that might have been caused by the administration of CyA and ketoconazole. Prospective research study. Five healthy, intact female Beagle dogs. CyA was administered orally twice daily to achieve stable whole blood trough levels of 400 to 600 ng/mL. Ketoconazole was added at a low therapeutic dose (average dose: 13.6 mg/kg/d) then at a subtherapeutic dose (average dose: 4.7 mg/kg/d). CyA whole blood trough levels were monitored every 3 to 4 days and maintained at 400 to 600 ng/mL by adjusting CyA doses accordingly. Physical examination, CBC, biochemical profile, and urinalysis were performed at 2-week intervals throughout the study period. The initial mean dose of CyA required to achieve target blood levels was 14.5 mg/ kg/d. With concurrent ketoconazole (low therapeutic dose, average dose: 13.6 mg/kg/d) and CyA administration, the CyA dose declined to 3.4 mg/kg/day (range: 1.2 to 5.2 mg/kg/d), representing a 75% reduction in CyA dose and monetary savings of 57.8%. At a subtherapeutic dose of ketoconazole (average dose: 4.7 mg/kg/d), combination therapy resulted in a CyA dose of 10.1 mg/kg/day (4.9 to 10.6 mg/kg/d), representing a 38% reduction in CyA dose and monetary savings of 23.8%. Weight loss and transient hypoalbuminemia of unknown clinical significance were observed. Other physical and biochemical evaluations were unremarkable over the 12-week study period. The oral administration of ketoconazole can be used to reduce substantially the oral CyA dose needed to maintain selected blood levels in healthy dogs. The oral administration of ketoconazole can result in substantial cost savings to owners of dogs receiving CyA after renal allograft transplantation or for the treatment of autoimmune disease.
The Rome trough and evolution of the Iapetean margin
DOE Office of Scientific and Technical Information (OSTI.GOV)
Walker, D.; Hamilton-Smith, T.; Drahovzal, J.A.
1991-08-01
Recent structural mapping of the Rome trough suggests a complex structure very different from the symmetrical and laterally continuous graben commonly depicted. Early and Middle Cambrian extension in the Rome trough of eastern Kentucky and adjacent areas resulted in a series of alternately facing half-grabens with variable displacement. These half-grabens are bounded by southwest-northeast-trending normal faults (e.g., Kentucky River and Warfield faults), which are laterally continuous only on the order to tens of kilometers. The Rome trough is laterally segmented by north-south-trending faults (e.g., Lexington fault) commonly expressed as flexures in younger rocks (e.g., Burning Springs anticline and Floyd Countymore » channel). Many of these north-south-trending faults have significant left-lateral displacement, and probably represent reactivated thrust faults of the Grenville tectonic front. The Rome trough and the associated Mississippi Valley, Rough Creek, and Birmingham fault systems were initiated during an Early Cambrian shift in sea-floor spreading from the Blue Ridge-Pine Mountain rift to the Ouachita rift along the Alabama-Oklahoma transform fault. These fault systems have been proposed as having originated from extensional stress propagated northward from the Ouachita rift across the transform fault. In the alternate model proposed here, faulting was brittle, extensional failure resulting form subsidence and flexure of the continental margin to the east. Following initiation of sea-floor spreading at the Blue Ridge-Pine Mountain rift in the latest Proterozoic, margin subsidence in the presence of the Alabama-Oklahoma transform boundary and the inherited Grenville tectonic front resulted in this interior cratonic fault system.« less
Evidence for Recent Liquid Water on Mars: Gullies in Sirenum Fossae Trough
NASA Technical Reports Server (NTRS)
2000-01-01
This mosaic of two Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) images shows about 20 different gullies coming down the south-facing wall of a trough in the Sirenum Fossae/Gorgonum Chaos region of the martian southern hemisphere. Each channel and its associated fan--or apron--of debris appears to have started just below the same hard, resistant layer of bedrock located approximately 100 meters (about 325 feet) below the top of the trough wall. The layer beneath this hard, resistant bedrock is interpreted to be permeable, which allows ground water to percolate through it and--at the location of this trough--seep out onto the martian surface. The channels and aprons only occur on the south-facing slope of this valley created by faults on each side of the trough. The depression is approximately 1.4 km (0.9 mi) across.The mosaic was constructed from two pictures taken on September 16, 1999, and May 1, 2000. The black line is a gap between the two images that was not covered by MOC. The scene covers an area approximately 5.5 kilometers (3.4 miles) wide by 4.9 km (3.0 mi) high. Sunlight illuminates the area from the upper left. The image is located near 38.5oS, 171.3oW. MOC high resolution images are taken black-and-white (grayscale); the color seen here has been synthesized from the colors of Mars observed by the MOC wide angle cameras and by the Viking Orbiters in the late 1970s.Han, Zhe; Pettit, Natasha N; Landon, Emily M; Brielmaier, Benjamin D
2017-04-01
Background: The impact of pharmacy interventions on optimizing vancomycin therapy has been described, however interventions vary among studies and the most optimal pharmacy practice model (PPM) for pharmacokinetic (PK) services has not been established. Objective: The purpose of this study is to demonstrate the value of 24 hours a day, 7 days a week (24/7) PK services. Methods: New PK services were implemented in 2 phases with institutional PPM expansion. Phase 1 included universal monitoring by pharmacists with recommendations made to prescribers during business hours. Phase 2 expanded clinical pharmacists' coverage to 24/7 and provided an optional 24/7 pharmacist-managed PK consult service. We compared vancomycin therapeutic trough attainment, dosing, and clinical and safety outcomes between phases 1 and 2 in adult inpatients receiving therapeutic intravenous vancomycin. Results. One hundred and fifty patients were included in each phase. Phase 2 had a greater proportion of vancomycin courses with therapeutic initial trough concentrations (27.5% vs 46.1%; p = 0.002), higher initial trough concentrations (10.9 mcg/mL vs 16.4 mcg/mL; p < 0.001), and optimized initial vancomycin dosing (13.5 mg/kg vs 16.2 mg/kg; p < 0.001). Phase 2 also saw significant reduction in the incidence of vancomycin-associated nephrotoxicity (21.1% vs 11.7%; p = 0.038). Dose optimization and improvement in initial target trough attainment were most notable among intensive care unit (ICU) patients. Conclusions. Our study demonstrated that 24/7 PK services implemented with institutional PPM expansion optimized vancomycin target trough attainment and improved patient safety.
Synoptic patterns leading to hailstorm in Chaharmahal and Bakhtiari province, Iran
NASA Astrophysics Data System (ADS)
Salahi, Bromand; Nohegar, Ahmad; Behrouzi, Mahmoud; Aalijahan, Mehdi
2018-03-01
The purpose of this study was to extract the synoptic patterns of 500 mb geopotential height and the sea level pressure leading to form hail in Chaharmahal and Bakhtiari province, Iran. To this end, at first, we explored hail occurrence in different areas of the province under investigation. Then, using sea level pressure and 500 mb geopotential height data, the patterns of hail occurrence were investigated through hierarchical clustering and Ward's method. The level of 500 mb patterns resulting in hail formation in the area include: (1) settlement of a cut-off low pressure blocking in Turkey and Iran's position in downstream of trough and injection of humidity coming from the Red Sea; (2) settlement of low ridge in northern Europe and Iran lying in downstream of the trough and injection of humidity of the Mediterranean Sea; (3) settlement of a cut-off low pressure in east of Europe and Iran lying in downstream of the trough; and (4) settlement of a deep trough in the Mediterranean Sea, formation of an omega-shaped blocking in Northern Europe and Iran lying in downstream of the trough. At sea level, the following patterns have caused hail formation in Chaharmahal and Bakhtiari province: (1) settlement of low pressure in Iran and Russia accompanying high pressure in Taklimakan Desert and east of Europe; (2) settlement of low pressure in Iran and high pressure in Egypt, northern Europe, and Taklimakan Desert; and (3) settlement of low pressure in Iran, Saudi Arabia and south of Italy and high pressure in Egypt and Siberia.
Mourad, Michel; Mourad, Georges; Wallemacq, Pierre; Garrigue, Valérie; Van Bellingen, Christophe; Van Kerckhove, Valérie; De Meyer, Martine; Malaise, Jacques; Eddour, Djamila Chaib; Lison, Dominique; Squifflet, Jean Paul; Haufroid, Vincent
2005-10-15
CYP3A5 and MDR1 polymorphisms have been shown to influence tacrolimus blood concentrations and dose requirements. The aim is to determine whether these polymorphisms also affect sirolimus trough concentrations and dose requirements after kidney transplantation. Eighty-five renal transplant recipients receiving sirolimus were included. Twenty-four were treated with a combined sirolimus-tacrolimus regimen. Eighty-one patients received steroids. Sirolimus and tacrolimus were adjusted to a target therapeutic window. CYP3A5 (intron 3) and MDR1 (exons 12, 21, 26) genotypes were correlated to the adjusted trough concentrations and dose requirements for both sirolimus and tacrolimus. There were no significant correlation between adjusted sirolimus trough concentrations or dose requirements and genetic polymorphisms. In a multiple regression model, adjusted-prednisone dose was involved with a positive or negative effect when considering sirolimus dose requirements or adjusted concentrations, respectively. In the subgroup of patients treated by tacrolimus and sirolimus, adjusted tacrolimus doses were higher in patients carrying at least one CYP3A5 *1 allele (median 0.083 vs. 0.035 mg/kg for CYP3A5*3/*3 patients, P<0.05). Adjusted-prednisolone dose and CYP3A5 polymorphism explained up to 61% of the variability in tacrolimus dose requirements. Unlike tacrolimus, sirolimus adjusted trough concentrations and dose requirements seem not affected by CYP3A5 and MDR1 polymorphisms. Adjusted-prednisone dose has a significant impact on tacrolimus and sirolimus dose requirements.
Determining the Nature of Late Gunn–Peterson Troughs with Galaxy Surveys
NASA Astrophysics Data System (ADS)
Davies, Frederick B.; Becker, George D.; Furlanetto, Steven R.
2018-06-01
Recent observations have discovered long (up to ∼110 Mpc/h), opaque Gunn–Peterson troughs in the z ∼ 5.5 Lyα forest, which are challenging to explain with conventional models of the post-reionization intergalactic medium. Here, we demonstrate that observations of the galaxy populations in the vicinity of the deepest troughs can distinguish two competing models for these features: deep voids where the ionizing background is weak due to fluctuations in the mean free path of ionizing photons would show a deficit of galaxies, while residual temperature variations from extended, inhomogeneous reionization would show an overdensity of galaxies. We use large (∼550 Mpc/h) semi-numerical simulations of these competing explanations to predict the galaxy populations in the largest of the known troughs at z ∼ 5.7. We quantify the strong correlation of Lyα effective optical depth and galaxy surface density in both models, and estimate the degree to which realistic surveys can measure such a correlation. While a spectroscopic galaxy survey is ideal, we also show that a relatively inexpensive narrowband survey of Lyα-emitting galaxies is ∼90% likely to distinguish between the competing models.
Amazonian volcanism inside Valles Marineris on Mars
NASA Astrophysics Data System (ADS)
Brož, Petr; Hauber, Ernst; Wray, James J.; Michael, Gregory
2017-09-01
The giant trough system of Valles Marineris is one of the most spectacular landforms on Mars, yet its origin is still unclear. Although often referred to as a rift, it also shows some characteristics that are indicative of collapse processes. For decades, one of the major open questions was whether volcanism was active inside the Valles Marineris. Here we present evidence for a volcanic field on the floor of the deepest trough of Valles Marineris, Coprates Chasma. More than 130 individual edifices resemble scoria and tuff cones, and are associated with units that are interpreted as lava flows. Crater counts indicate that the volcanic field was emplaced sometime between ∼0.4 Ga and ∼0.2 Ga. The spatial distribution of the cones displays a control by trough-parallel subsurface structures, suggesting magma ascent in feeder dikes along trough-bounding normal faults. Spectral data reveal an opaline-silica-rich unit associated with at least one of the cones, indicative of hydrothermal processes. Our results point to magma-water interaction, an environment of astrobiological interest, perhaps associated with late-stage activity in the evolution of Valles Marineris, and suggest that the floor of Coprates Chasma is promising target for the in situ exploration of Mars.
NASA Astrophysics Data System (ADS)
Maccari, Augusto; Donnola, Sandro; Matino, Francesca; Tamano, Shiro
2016-05-01
Since July 2013, the first stand-alone Molten Salt Parabolic Trough (MSPT) demo plant, which was built in collaboration with Archimede Solar Energy and Chiyoda Corporation, is in operation, located adjacent to the Archimede Solar Energy (ASE) manufacturing plant in Massa Martana (Italy). During the two year's operating time frame, the management of the demo plant has shown that MSPT technology is a suitable and reliable option. Several O&M procedures and tests have been performed, as Heat Loss and Minimum Flow Test, with remarkable results confirming that this technology is ready to be extended to standard size CSP plant, if the plant design takes into account molten salt peculiarities. Additionally, the plant has been equipped on fall 2014 with a Steam Generator system by Chiyoda Corporation, in order to test even this important MSPT plant subsystem and to extend the solar field active time, overcoming the previous lack of an adequate thermal load. Here, a description of the plant improvements and the overall plant operation figures will be presented.
NASA Astrophysics Data System (ADS)
Kaneda, Y.; Kawaguchi, K.; Araki, E.; Matsumoto, H.; Nakamura, T.; Nakano, M.; Kamiya, S.; Ariyoshi, K.; Baba, T.; Ohori, M.; Hori, T.; Takahashi, N.; Kaneko, S.; Donet Research; Development Group
2010-12-01
Yoshiyuki Kaneda Katsuyoshi Kawaguchi*, Eiichiro Araki*, Shou Kaneko*, Hiroyuki Matsumoto*, Takeshi Nakamura*, Masaru Nakano*, Shinichirou Kamiya*, Keisuke Ariyoshi*, Toshitaka Baba*, Michihiro Ohori*, Narumi Takakahashi*, and Takane Hori** * Earthquake and Tsunami Research Project for Disaster Prevention, Leading Project , Japan Agency for Marine-Earth Science and Technology (JAMSTEC) **Institute for Research on Earth Evolution, Japan Agency for Marine-Earth Science and Technology (JAMSTEC) DONET (Dense Ocean Floor Network for Earthquakes and Tsunamis) is the real time monitoring system of the Tonankai seismogenic zones around the Nankai trough southwestern Japan. We were starting to develop DONET to perform real time monitoring of crustal activities over there and the advanced early warning system. DONET will provide important and useful data to understand the Nankai trough maga thrust earthquake seismogenic zones and to improve the accuracy of the earthquake recurrence cycle simulation. Details of DONET concept are as follows. 1) Redundancy, Extendable function and advanced maintenance system using the looped cable system, junction boxes and the ROV/AUV. DONET has 20 observatories and incorporated in a double land stations concept. Also, we are developed ROV for the 10km cable extensions and heavy weight operations. 2) Multi kinds of sensors to observe broad band phenomena such as long period tremors, very low frequency earthquakes and strong motions of mega thrust earthquakes over M8: Therefore, sensors such as a broadband seismometer, an accelerometer, a hydrophone, a precise pressure gauge, a differential pressure gauge and a thermometer are equipped with each observatory in DONET. 3) For speedy detections, evaluations and notifications of earthquakes and tsunamis: DONET system will be deployed around the Tonankai seismogenic zone. 4) Provide data of ocean floor crustal deformations derived from pressure sensors: Simultaneously, the development of data assimilation method using DONET data is very important to improve the recurrence cycle simulation model. 5) Understanding of the interaction between the crust and upper mantle around the Nankai trough subduction zone. We will deploy DONET not only in the Tonankai seismogenic zone but also DONET2 with high voltages in the Nankai seismogenic zone western the Nankai trough: The total system will be deployed to understand the seismic linkage between the Tonankai and Nankai earthquakes: Using DONET and DONET2 data, we will be able to observe the crustal activities and before and after slips at the Tonankai earthquake and Nankai earthquake. And we will improve the recurrence cycle simulation model by the advanced data assimilation method. Actually, we constructed one observatory in DONET and observed some earthquakes and tsunamis. We will introduce details of DONET/DONET2 and some observed data.
Ryder, Robert T.; Harris, Anita G.; Repetski, John E.; revised and digitized by Crangle, Robert D.
2003-01-01
A 275-mi-long restored stratigraphic cross section from Medina County, Ohio, through southwestern and south-central Pennsylvania to Hampshire County, W. Va., provides new details on Cambrian and Ordovician stratigraphy in the central Appalachian basin and the structure of underlying Precambrian basement rocks. From west to east, the major structural elements of the block-faulted basement in this section are (1) the relatively stable, slightly extended craton, which includes the Wooster arch, (2) the fault-controlled Ohio-West Virginia hinge zone, which separates the craton from the adjoining Rome trough, (3) the Rome trough, which consists of an east-facing asymmetric graben and an overlying sag basin, and (4) a positive fault block, named here the South-central Pennsylvania arch, which borders the eastern margin of the graben part of the Rome trough. Pre-Middle Ordovician structural relief on Precambrian basement rocks across the down-to-the-west normal fault that separates the Rome trough and the adjoining South-central Pennsylvania arch amounted to between 6,000 and 7,000 ft. The restored cross section shows eastward thickening of the Cambrian and Ordovician sequence from about 3,000 ft near the crest of the Wooster arch at the western end of the section to about 5,150 ft at the Ohio-West Virginia hinge zone adjoining the western margin of the Rome trough to about 19,800 ft near the depositional axis of the Rome trough. East of the Rome trough, at the adjoining western edge of the South-central Pennsylvania arch, the Cambrian and Ordovician sequence thins abruptly to about 13,500 ft and then thins gradually eastward across the arch to about 12,700 ft near the Allegheny structural front and to about 10,150 ft at the eastern end of the restored section. In general, the Cambrian and Ordovician sequence along this section consists of four major lithofacies that are predominantly shallow marine to peritidal in origin. In ascending stratigraphic order, the lithofacies are identified by the following descriptive names: (1) sandstone, shale, limestone, and dolomite unit, (2) dolomite and sandstone unit, (3) limestone and black shale unit, and (4) shale and sandstone unit. Each of these units and their associated subunits thicken from west to east across the restored section to a maximum near the depositional axis of the Rome trough and then thin eastward to the end of the section. The sandstone, shale, limestone, and dolomite unit is largely confined to the asymmetric graben that marks the initial phase of the Rome trough. This unit is Early and Middle Cambrian in age and consists, in ascending order, of a basal sandstone unit (undrilled but probably present), the Tomstown Dolomite (undrilled but probably present), the Waynesboro Formation, and the Pleasant Hill Limestone and its equivalent lower one-third of the Elbrook Formation at the eastern end of the section. The dolomite and sandstone unit forms the core of the Cambrian and Ordovician sequence. In the Rome trough and on the adjoining South-central Pennsylvania arch, this unit consists, in ascending order, of the Middle and Upper Cambrian Warrior Formation and the equivalent upper two-thirds of the Elbrook Formation at the eastern end of the section, the Upper Cambrian Gatesburg Formation, and the Lower Ordovician and Middle Ordovician (Whiterockian and Chazyan) Beekmantown Group. West of the Ohio-West Virginia hinge zone, the dolomite and sandstone unit consists, in ascending order, of the Conasauga Formation of Janssens (1973), the Krysik sandstone of driller's usage, the B zone of Calvert (1964), the Knox Dolomite and the associated Rose Run Sandstone Member, and the Wells Creek Formation. The widespread Knox unconformity is located at the base of the Wells Creek Formation and at or near the top of the adjoining Beekmantown Group, except near the depositional axis of the Rome trough, where the unconformity seems to be absent. The limestone and black shale unit i
Hall, David R [Provo, UT; Hall, Jr., H. Tracy
2007-07-24
A transmission system in a downhole component comprises a data transmission element in both ends of the downhole component. Each data transmission element houses an electrically conducting coil in a MCEI circular trough. The electrically conducting coil comprises at least two generally fractional loops. In the preferred embodiment, the transmission elements are connected by an electrical conductor. Preferably, the electrical conductor is a coaxial cable. Preferably, the MCEI trough comprises ferrite. In the preferred embodiment, the fractional loops are connected by a connecting cable. In one aspect of the present invention, the connecting cable is a pair of twisted wires. In one embodiment the connecting cable is a shielded pair of twisted wires. In another aspect of the present invention, the connecting cable is a coaxial cable. The connecting cable may be disposed outside of the MCEI circular trough.
Contrasting modes of rifting: The Benue Trough and Cameroon Volcanic Line, West Africa
NASA Astrophysics Data System (ADS)
Okereke, C. S.
1988-08-01
The Benue trough of west Africa is commonly believed to be a rift feature that originated in the Cretaceous at about the time that Africa and South America began to separate. Bouguer gravity and available geological data in the trough indicate that its formation was probably the result of regional horizontal stresses in the lithosphere, causing crustal extension and surface subsidence. By contrast, the data for the adjoining Cameroon volcanic line suggests that the associated tensional stresses relate to mantle upwarp causing thinning of the lithosphere and regional crustal uplift similar to that associated with the Kenya rift. Thus the association of passive and active rifts seen in the Afro-Arabia rift system is also a feature of the Cretaceous rift system in west Africa.
Ancient geodynamics and global-scale hydrology on Mars.
Phillips, R J; Zuber, M T; Solomon, S C; Golombek, M P; Jakosky, B M; Banerdt, W B; Smith, D E; Williams, R M; Hynek, B M; Aharonson, O; Hauck , S A
2001-03-30
Loading of the lithosphere of Mars by the Tharsis rise explains much of the global shape and long-wavelength gravity field of the planet, including a ring of negative gravity anomalies and a topographic trough around Tharsis, as well as gravity anomaly and topographic highs centered in Arabia Terra and extending northward toward Utopia. The Tharsis-induced trough and antipodal high were largely in place by the end of the Noachian Epoch and exerted control on the location and orientation of valley networks. The release of carbon dioxide and water accompanying the emplacement of approximately 3 x 10(8) cubic kilometers of Tharsis magmas may have sustained a warmer climate than at present, enabling the formation of ancient valley networks and fluvial landscape denudation in and adjacent to the large-scale trough.
NASA Astrophysics Data System (ADS)
Chappell, A.; Kusznir, N. J.
2005-05-01
The southern Rockall Trough south of 57 N has previously been interpreted as either an intra-continental rift floored with highly extended continental crust, or a failed oceanic rift formed by Cretaceous sea floor spreading. Satellite gravity, bathymetry data and seismic estimates of sediment thickness are used to derive crustal basement thickness for the southern Rockall Trough and adjacent regions using a gravity inversion method incorporating a correction for the large negative thermal gravity component present in oceanic and stretched continental lithosphere. The marine Bouguer anomaly, derived from satellite free air gravity (Sandwell & Smith 1997) and Gebco 2003 bathymetry data, is inverted using the method of Oldenberg (1974), incorporating an iteratively applied thermal anomaly correction, to give Moho depth. For oceanic crust the thermal anomaly correction is calculated using isochron ages (Muller et al. 1997) and for continental crust from the beta stretching factors resulting from gravity derived crustal basement thickness and an assumed rift age. When sediment thickness and volcanic addition are assumed to be zero, the resulting upper bound of crustal thickness from the gravity inversion is as little as 10 km in the southern Rockall Trough. A segmented axial thickening of the crust at the centre of the Rockall Trough is predicted, between the Barra volcanic ridge and the Anton Dohrn seamount and is interpreted as having a volcanic origin. Inclusion of a sediment thickness correction in the gravity inversion further reduces predicted crustal thickness. A pseudo-sediment-thickness map has been constructed from the available wide-angle data and incorporated in the gravity inversion. The addition of up to 5.5 km of sediment in the gravity inversion reduces the upper bound of crustal thickness to less than 3 km in some locations. The segmented axial thickening and thin crust shown by the gravity inversion, the lack of intra-basinal faulting, and the volcanic origin for the axis shown by normal incidence seismic data, are consistent with a sea-floor spreading origin for the southern Rockall Trough and not formation by intra-continental rifting. We investigate the formation of the southern Rockall Trough using SfMargin, a new model of continental lithosphere thinning leading to continental breakup and sea-floor spreading initiation. Comparisons of the geometry of the southern Rockall Trough predicted by SfMargin with that observed are consistent with a short period (20Ma) of slow Cretaceous sea-floor spreading, followed by thermal subsidence to present day. This work forms part of the NERC Margins iSIMM project. iSIMM investigators are from Liverpool and Cambridge Universities, Badley Geoscience & Schlumberger Cambridge Research supported by the NERC, the DTI, Agip UK, BP, Amerada Hess Ltd, Anadarko, ConocoPhillips, Shell, Statoil and WesternGeco. The iSIMM team comprises NJ Kusznir, RS White, AM Roberts, PAF Christie, A Chappell, J Eccles, R Fletcher, D Healy, N Hurst, ZC Lunnon, CJ Parkin, AW Roberts, LK Smith, V Tymms & R Spitzer.
Western Ross Sea continental slope gravity currents
NASA Astrophysics Data System (ADS)
Gordon, Arnold L.; Orsi, Alejandro H.; Muench, Robin; Huber, Bruce A.; Zambianchi, Enrico; Visbeck, Martin
2009-06-01
Antarctic Bottom Water of the world ocean is derived from dense Shelf Water that is carried downslope by gravity currents at specific sites along the Antarctic margins. Data gathered by the AnSlope and CLIMA programs reveal the presence of energetic gravity currents that are formed over the western continental slope of the Ross Sea when High Salinity Shelf Water exits the shelf through Drygalski Trough. Joides Trough, immediately to the east, offers an additional escape route for less saline Shelf Water, while the Glomar Challenger Trough still farther east is a major pathway for export of the once supercooled low-salinity Ice Shelf Water that forms under the Ross Ice Shelf. The Drygalski Trough gravity currents increase in thickness from ˜100 to ˜400 m on proceeding downslope from ˜600 m (the shelf break) to 1200 m (upper slope) sea floor depth, while turning sharply to the west in response to the Coriolis force during their descent. The mean current pathway trends ˜35° downslope from isobaths. Benthic-layer current and thickness are correlated with the bottom water salinity, which exerts the primary control over the benthic-layer density. A 1-year time series of bottom-water current and hydrographic properties obtained on the slope near the 1000 m isobath indicates episodic pulses of Shelf Water export through Drygalski Trough. These cold (<-1 °C), salty (>34.75) pulses correlate with strong downslope bottom flow. Extreme examples occurred during austral summer/fall 2003, comprising concentrated High Salinity Shelf Water (-1.9 °C; 34.79) and approaching 1.5 m s -1 at descent angles as large as ˜60° relative to the isobaths. Such events were most common during November-May, consistent with a northward shift in position of the dense Shelf Water during austral summer. The coldest, saltiest bottom water was measured from mid-April to mid-May 2003. The summer/fall export of High Salinity Shelf Water observed in 2004 was less than that seen in 2003. This difference, if real, may reflect the influence of the large iceberg C-19 over Drygalski Trough until its departure in mid-May 2003, when there was a marked decrease in the coldest, saltiest gravity current adjacent to Drygalski Trough. Northward transport of cold, saline, recently ventilated Antarctic Bottom Water observed in March 2004 off Cape Adare was ˜1.7 Sv, including ˜0.4 Sv of High Salinity Shelf Water.
Folorunso, O R; Kayode, Sule; Onibon, V O
2014-01-01
Water troughs from deep litter and caged chicken water troughs (drinkers) fixed to each of the different 3-tier cages containing layer chickens in Farms A, B and C were subjected to a 7-day study which involved the monitoring of poultry farm hygiene. Drinkers were washed before filling with water on Day 1. For Days 3, 5 and 7 water was served without prior washing. The occurrence and characterization of the bacteria isolates were investigated and data obtained were analyzed and compared. For the bacterial count on Day 1, for layer chickens on cage system, no significant differences (p > 0.05) among the farms and between the farms tier interactions. On Day 3, no significant difference (p > 0.05) among the parameters. On Day 5, there was significant difference (p<0.05) among the farms and on Day 7, there was high significant difference (p < 0.01) among the farms. On Days 5 and 7, there were no significant differences (p>0.05) among the tiers nor between the interactions of the farms and tiers. The bacterial count in water troughs of layer chickens in deep litter system, on Day 1, had no significant differences (p > 0.05) between the farms, water troughs and their interactions. On Day 3, no significant difference (p > 0.05) among the parameters. On Days 5 and 7, there were significant difference (p<0.05) and a high significant difference (p < 0.01) between the farms respectively. On Days 5 and 7, no significant differences between the water troughs and between the interaction of the farms and the water troughs. Farm A isolates contained Staphylococcus aureus, Proteus vulgaris, Streptococcus faecalis, Escherichia coli, Staphylococcus epidermis, Klebsiella sp., Salmonella sp., Bacillus subtilis, Lactobacillus salivarius and Corynebacterium sp. Farm B had Staphylococcus aureus, S. epidermis, Bacillus subtilis, Corynebacterium sp., Escherichia coli, Streptococcus faecalis and Klebsiella sp. while for Farm C, apart from the prevalent bacteria isolates obtained in Farms A and B, additional 2 bacterial isolates, Lactobacillus salivarius and Pseudomonas aeuriginosa were found. In conclusion, water troughs when cleaned on daily basis carry minimum bacterial load. Those left for 3, 5 and 7 days uncleaned had progressively high bacterial loads, suggesting that the flock of birds and the consumers of the eggs and meat from the chickens are at risk of bacterial infection unless strict farm hygiene is ensured through regular monitoring.
NASA Astrophysics Data System (ADS)
Hirata, K.; Fujiwara, H.; Nakamura, H.; Osada, M.; Morikawa, N.; Kawai, S.; Ohsumi, T.; Aoi, S.; Yamamoto, N.; Matsuyama, H.; Toyama, N.; Kito, T.; Murashima, Y.; Murata, Y.; Inoue, T.; Saito, R.; Takayama, J.; Akiyama, S.; Korenaga, M.; Abe, Y.; Hashimoto, N.
2016-12-01
For the forthcoming Nankai earthquake with M8 to M9 class, the Earthquake Research Committee(ERC)/Headquarters for Earthquake Research Promotion, Japanese government (2013) showed 15 examples of earthquake source areas (ESAs) as possible combinations of 18 sub-regions (6 segments along trough and 3 segments normal to trough) and assessed the occurrence probability within the next 30 years (from Jan. 1, 2013) was 60% to 70%. Hirata et al.(2015, AGU) presented Probabilistic Tsunami Hazard Assessment (PTHA) along Nankai Trough in the case where diversity of the next event's ESA is modeled by only the 15 ESAs. In this study, we newly set 70 ESAs in addition of the previous 15 ESAs so that total of 85 ESAs are considered. By producing tens of faults models, with various slip distribution patterns, for each of 85 ESAs, we obtain 2500 fault models in addition of previous 1400 fault models so that total of 3900 fault models are considered to model the diversity of the next Nankai earthquake rupture (Toyama et al.,2015, JpGU). For PTHA, the occurrence probability of the next Nankai earthquake is distributed to possible 3900 fault models in the viewpoint of similarity to the 15 ESAs' extents (Abe et al.,2015, JpGU). A major concept of the occurrence probability distribution is; (i) earthquakes rupturing on any of 15 ESAs that ERC(2013) showed most likely occur, (ii) earthquakes rupturing on any of ESAs whose along-trench extent is the same as any of 15 ESAs but trough-normal extent differs from it second likely occur, (iii) earthquakes rupturing on any of ESAs whose both of along-trough and trough-normal extents differ from any of 15 ESAs rarely occur. Procedures for tsunami simulation and probabilistic tsunami hazard synthesis are the same as Hirata et al (2015). A tsunami hazard map, synthesized under an assumption that the Nankai earthquakes can be modeled as a renewal process based on BPT distribution with a mean recurrence interval of 88.2 years (ERC, 2013) and an aperiodicity of 0.22, as the median of the values (0.20 to 0.24)that ERC (2013) recommended, suggests that several coastal segments along the southwest coast of Shikoku Island, the southeast coast of Kii Peninsula, and the west coast of Izu Peninsula show over 26 % in exceedance probability that maximum water rise exceeds 10 meters at any coastal point within the next 30 years.
Characterization of inappetent sheep in a feedlot using radio-tracking technology.
Barnes, Anne L; Wickham, Sarah L; Admiraal, Ryan; Miller, David W; Collins, Teresa; Stockman, Catherine; Fleming, Patricia A
2018-04-03
The feeding and drinking behaviours of sheep were monitored using RFID technology at a commercial pre-embarkation feedlot in Western Australia with the aim of characterizing feeding and drinking patterns of inappetent sheep that might allow them to be treated. Feeding and drinking behaviours of sheep were compared with their survival and change in body condition. Patterns of number of visits and the time spent at feed and water troughs were analyzed for a total of 8,206 sheep, representing four consignments that were monitored for a range of 6-31 d. Data for feeding and drinking behaviours were compared for the first 6 d. For animals that were alive at exit, 18.9% of sheep attended the feed trough for less than 0.25 h d-1 (15 min per day) on day 1; this decreased to only 2.4% of sheep by day 6. Of the sheep monitored, 0.93% died (n = 76); Salmonella spp. infection was the leading cause of death (n = 40; 52.6% of all deaths) across all months and was accompanied with inanition. There was marked variability in the average time spent at the feed trough for sheep that died eventually from salmonella/inanition (contributing to the lack of statistical difference in time spent at feed trough between sheep dying from different causes; P = 0.056). Over half (55%) of the animals diagnosed with salmonella/inanition spent an average of less than 0.50 h d-1 (30 min per day) and 45% less than 0.25 h d-1 at the feed trough. There was a negative correlation (r) in time spent at the feed trough overtime for individual sheep that died from salmonella/inanition, indicating that these individuals went off their feed. This pattern was not evident for animals that died from other causes (significant difference in r values between five categories of cause of death; P = 0.040). Characterization of feeding behaviour of sheep that died from salmonella/inanition therefore appears to require more than simply monitoring daily intake. There was no difference in time spent at water troughs between sheep that died or were alive at exit (average 0.30 ± 0.23 h d-1). This study reveals that the patterns of feeding and drinking behaviours during pre-embarkation feedlotting do not readily allow identification of animals that warrant singling out for veterinary care or alternative feed arrangements. This result highlights the need for experienced stockmanship in handling these animals.
NASA Astrophysics Data System (ADS)
Lucchitta, Baerbel K.
2010-10-01
The paper reviews the evolution of hypotheses of lakes in Valles Marineris through observations made from the time of Mariner and continuing through the Viking, MGS, MO, MEx, and MRO missions. Several pertinent findings from these missions are addressed, including: The morphology and composition of the interior layered deposits (ILD); the question whether ILD are deposited inside the troughs or exhumed from the walls; the possible existence of ancestral basins; the derivation of water; arguments for an origin as aqueous, eolian, or pyroclastic sediments, or sub/ice volcanoes; origin of inclined layers, mounds and moats; and age relations of features within and peripheral to the troughs. A possible scenario begins with the collapse of ice-charged ground into ancestral basins along structural planes of weakness due to Tharsis stresses, about 3.5 Ga ago. The basins rapidly filled with water from ground ice, subterranean aquifers, or nearby valley networks. The water spilled out of the peripheral troughs and flowed across high plateaus into early outflow channels. The ancestral basins then filled with sediments derived from valley networks or from trapped eolian or pyroclastic deposits. Alternatively, volcanoes rose under the water or ice to form tuyas. The water was highly acidic, and sediments may have been deposited directly as evaporites or were later altered to evaporites by the brines or by hydrothermal activity. Percolating fluids produced iron oxide concretions. Similar alteration would have affected the putative volcanoes. Most of the ILD were emplaced early in the troughs' history. Shortly thereafter, more water erupted from the peripheral troughs and formed additional chaos and outflow channels. The ancestral basins were breached by erosion and tectonism, and the through-going Coprates/Ius graben system developed. Major lakes within the Valles Marineris dried up and vigorous wind erosion reduced the friable, evaporite-rich sediments to isolated mounds. Simultaneously, the iron oxide concretions weat hered out to form lag deposits mostly at the base of scarps. During that time, some of the ILD may have become tilted by structural deformation. Alternatively, inclined beds on the mounds may have come from draping by volcanic ash or eolian deposits, or by gravity sliding on the steep, evaporite-charged flanks of the mounds. Inclined layers could be readily explained if the ILD were tuyas. Landslides fell into the newly created voids and occasional sliding persisted throughout most of the troughs' history. Minor volcanic activity continued and may have spewed mafic ash onto the eroded ILD-mound surfaces and onto the trough floors. Eventually, only wind persisted, producing yardangs on the ILD and reworking ash, trapped eolian sediments, and debris eroded from the ILD.
High H2O/Ce of K-rich MORB from Lena Trough and Gakkel Ridge, Arctic Ocean
NASA Astrophysics Data System (ADS)
Snow, J. E.; Feig, S. T.
2014-12-01
Lena Trough in the Arctic ocean is the oblique spreading continuation of Gakkel Ridge through the Fram Strait (eg Snow et al. 2011). Extreme trace element and isotopic compositions seen in Lena Trough basalt appear to be the enriched end member dominating the geochemistry of the Western Volcanic Zone of the Western Gakkel Ridge as traced by Pb isotopes, K2O/TiO2, Ba/Nb and other isotopic, major and trace element indicators of mixing (Nauret et al., 2011). This is in contrast to neighboring Gakkel Ridge which has been spreading for 50-60 million years. Basalts from Lena Trough also show a pure MORB noble gas signature (Nauret et al., 2010) and peridotites show no evidence of ancient components in their Os isotopes (Lassiter, et al., in press). The major and trace element compositions of the basalts, however are very distinct from MORB, being far more potassic than all but a single locality on the SW Indian Ridge. We determined H2O and trace element composiitions of a suite of 17 basalt glasses from the Central Lena Trough (CLT) and the Gakkel Western Volcanic Zone, including many of those previously analyzed by Nauret et al. (2012). The Western Gakkel glasses have high H2O/Ce for MORB (>300) suggesting a water rich source consistent with the idea that the northernmost Atlantic mantle is enriched in water (Michael et al., 1995). They are within the range of Eastern Gakkel host glasses determined by Wanless et al, 2013. The Lena Trough (CLT) glasses are very rich in water for MORB (>1% H2O) and are among the highest H2O/Ce (>400) ever measured in MORB aside from melt inclusions in olivine. Mantle melting dynamics and melt evolution cannot account for the H2O/Ce variations in MORB, as these elements have similar behavior during melting and crustal evolution. Interestingly, the H2O/K2O ratios in the basalts are only around 1. This is because the K2O levels in the CLT glasses are very high as well relative to REE. The absolutely linear relationship between H2O and K2O/TiO2 in Lena and Gakkel basalts shows that water systematics in these rocks are completely governed by source composition, with little or no modification by mantle melting dynamics or crystal fractionation. The geochemical influence of the WVZ enriched mantle source declines with distance from Lena Trough along Gakkel Ridge.
Sharpe, E D; Henry, C J; Mundorf, T K; Day, D G; Stewart, J A; Jenkins, J N; Stewart, W C
2005-01-01
To compare the efficacy and safety of brimonidine 0.2% vs unoprostone 0.15%, both added to timolol maleate 0.5% each given twice daily. In this prospective, multi-centred, double-masked, crossover comparison, patients were randomized to one treatment group for a 6-week treatment period, and then crossed over to the opposite treatment. Measurements were performed at 0800, 1000, 1600, 1800, and 2000 h at baseline and at the end of each treatment period. In all, 33 patients entered this trial and 29 completed. The baseline trough intraocular pressure (IOP) was 23.3+/-2.4 and the diurnal curve IOP was 22.0+/-1.3 mmHg. For the brimonidine and timolol maleate treatment group, the trough IOP was 21.6+/-3.3 and the diurnal curve IOP was 19.8+/-2.1 mmHg, while the timolol and unoprostone treatment showed a trough IOP of 20.9+/-3.8 and a diurnal curve IOP of 19.3+/-2.4 mmHg. There was no significant difference between treatment groups at any time point for the diurnal curve, or in the reduction from baseline (P>0.05). Both treatments failed to statistically reduce the IOP from baseline at 1800 h. There was no difference between treatment groups regarding ocular and systemic unsolicited adverse events, but patients admitted to more dryness (P=0.02) and burning upon instillation (P<0.0001) with unoprostone by survey. Brimonidine 0.2% or unoprostone 0.15% added to timolol maleate 0.5% provide similar efficacy and safety throughout the daytime diurnal curve.
Switching from rivaroxaban to warfarin: an open label pharmacodynamic study in healthy subjects
Moore, Kenneth Todd; Byra, William; Vaidyanathan, Seema; Natarajan, Jaya; Ariyawansa, Jay; Salih, Hiba; Turner, Kenneth C
2015-01-01
Aims The primary objective was to explore the pharmacodynamic changes during transition from rivaroxaban to warfarin in healthy subjects. Safety, tolerability and pharmacokinetics were assessed as secondary objectives. Methods An open label, non-randomized, sequential two period study. In treatment period 1 (TP1), subjects received rivaroxaban 20 mg once daily (5 days), followed by co-administration with a warfarin loading dose regimen of 5 or 10 mg (for the 10 mg regimen, the dose could be uptitrated to attain target international normalized ratio [INR] ≥2.0) once daily (2–4 days). When trough INR values ≥2.0 were attained, rivaroxaban was discontinued and warfarin treatment continued as monotherapy (INR 2.0–3.0). During treatment period 2, subjects received the same warfarin regimen as in TP1, but without rivaroxaban. Results During co-administration, maximum INR and prothrombin time (PT) values were higher than with rivaroxaban or warfarin monotherapy. The mean maximum effect (Emax) for INR after co-administration was 2.79–4.15 (mean PT Emax 41.0–62.7 s), compared with 1.41–1.74 (mean PT Emax 20.1–25.2 s) for warfarin alone. However, rivaroxaban had the smallest effect on INR at trough rivaroxaban concentrations. Neither rivaroxaban nor warfarin significantly affected maximum plasma concentrations of the other drug. Conclusions The combined pharmacodynamic effects during co-administration of rivaroxaban and warfarin were greater than additive, but the pharmacokinetics of both drugs were unaffected. Co-administration was well tolerated. When transitioning from rivaroxaban to warfarin, INR monitoring during co-administration should be performed at the trough rivaroxaban concentration to minimize the effect of rivaroxaban on INR. PMID:25475601
Scaldaferri, Franco; D'Ambrosio, Daria; Holleran, Grainne; Poscia, Andrea; Petito, Valentina; Lopetuso, Loris; Graziani, Cristina; Laterza, Lucrezia; Pistone, Maria Teresa; Pecere, Silvia; Currò, Diego; Gaetani, Eleonora; Armuzzi, Alessandro; Papa, Alfredo; Cammarota, Giovanni; Gasbarrini, Antonio
2017-01-01
Infliximab is an effective treatment for inflammatory bowel disease (IBD). Studies differ regarding the influence of body mass index (BMI) on the response to infliximab, with the majority of studies indicating that increased BMI may be associated with a poorer response to Infliximab. However, the pharmacokinetic mechanisms causing this have not yet been reported. Examine the correlation between BMI/immunosuppressant use with clinical response, trough and post-infusion levels of infliximab, tumour necrosis factor-α(TNF-α) and anti-drug antibodies(ATI), and determine if these factors can predict future response. We collected serum from 24 patients receiving Infliximab before and 30 minutes following infusion. Clinical parameters were collected retrospectively and prospectively. ELISA measurements of infliximab, TNF-α and ATI were performed. We confirmed that patients with higher infliximab trough levels have a better response rate and that patients with an elevated BMI display a higher rate of loss of response (20%). Patients with a higher BMI had elevated post-infusion levels of infliximab. Additionally, the ratio of IFX/TNF-α trough levels correlated with clinical response to the following infusion. This study confirms that an elevated BMI is associated with a poorer response to infliximab. For the first time, we describe that a higher BMI correlates with higher post-infusion levels, however this does not correlate with a higher rate of response to the drug, suggesting that circulating drug levels do not correlate with tissue levels. Furthermore, in our small cohort of patients, we identified a possible predictive marker of future response to treatment which may be used to guide dose escalation and predict non-response to infliximab.
Lau, Yvonne Y; Gu, Wen; Lin, Tiffany; Viraswami-Appanna, Kalyanee; Cai, Can; Scott, Jeffrey W; Shi, Michael
2017-06-01
The impact of proton pump inhibitors (PPIs) on the pharmacokinetics (PK) and efficacy of ceritinib was evaluated. A healthy subject drug-drug interaction (DDI) study was conducted to assess the effect of esomeprazole on the PK of a single 750 mg dose of ceritinib. To further investigate the impact of PPIs on the PK and efficacy of ceritinib in ALK-positive cancer patients, two subgroup analyses were performed. Analysis 1 evaluated ceritinib steady-state trough concentration (C trough,ss ) and overall response rate (ORR) by concomitant use of PPIs in patients from the ASCEND-1, -2, and -3 studies; analysis 2 evaluated ceritinib single-dose and steady-state AUC 0-24h and C max by concomitant PPI use in patients from ASCEND-1 using a definition of PPI usage similar to that used in the healthy subject study. In the healthy subject study, co-administration of a single 750 mg dose of ceritinib with esomeprazole 40 mg for 6 days decreased ceritinib AUC 0-∞ by 76% and C max by 79%. However, based on subgroup analysis 1, patients had similar C trough,ss and ORR regardless of concomitant PPI usage. Based on analysis 2, co-administration of a single 750 mg ceritinib dose with PPIs for 6 days in patients suggested less effect on ceritinib exposure than that observed in healthy subjects as AUC 0-24h decreased by 30% and C max decreased by 25%. No clinically meaningful effect on steady-state exposure was observed after daily dosing. Long-term administration of ceritinib with PPIs does not adversely affect the PK and efficacy of ceritinib in ALK-positive cancer patients.
Dabigatran Levels in Elderly Patients with Atrial Fibrillation: First Post-Marketing Experiences.
Bolek, Tomáš; Samoš, Matej; Škorňová, Ingrid; Stančiaková, Lucia; Staško, Ján; Galajda, Peter; Kubisz, Peter; Mokáň, Marián
2018-05-08
The number of elderly individuals with non-valvular atrial fibrillation (NV-AF) requiring long-term anticoagulation is rising. The pharmacokinetics of oral anticoagulants in elderly individuals may differ from that for younger patients. The aim of this study was to assess the dabigatran levels in elderly patients with NV-AF. A pilot prospective post-marketing study in patients with NV-AF on dabigatran therapy was performed; we enrolled 21 consecutive elderly patients (aged ≥ 75 years) on a reduced dabigatran regimen (110 mg twice daily) and compared them with 13 younger (≤ 70 years) individuals on reduced dabigatran therapy due to renal impairment and with 16 younger patients on standard dabigatran therapy (150 mg twice daily). Blood samples were taken for the assessment of dabigatran trough and peak levels. Dabigatran levels were measured with the Hemoclot ® Thrombin Inhibitor Assay. There were significant differences in dabigatran trough levels when comparing elderly patients on reduced dabigatran with non-elderly patients on reduced dabigatran (99.3 ± 73.6 vs 51.6 ± 25.6 ng/mL; p < 0.01). Similarly, the detected dabigatran peak levels were significantly higher in elderly patients on reduced dabigatran compared with non-elderly patients on reduced dabigatran (173.4 ± 116.2 vs 116.1 ± 19.1 ng/mL; p < 0.01). No significant differences in dabigatran trough and peak levels were found when comparing elderly patients on reduced dabigatran with non-elderly patients on standard dabigatran therapy. This pilot study demonstrated that elderly patients on reduced dabigatran exhibit significantly higher dabigatran levels than younger individuals on a reduced regimen, and similar levels compared with younger individuals on standard dabigatran.
Bioavailability of voriconazole in hospitalised patients.
Veringa, Anette; Geling, Sanne; Span, Lambert F R; Vermeulen, Karin M; Zijlstra, Jan G; van der Werf, Tjip S; Kosterink, Jos G W; Alffenaar, Jan-Willem C
2017-02-01
An important element in antimicrobial stewardship programmes is early switch from intravenous (i.v.) to oral antimicrobial treatment, especially for highly bioavailable drugs. The antifungal agent voriconazole is available both in i.v. and oral formulations and bioavailability is estimated to be >90% in healthy volunteers, making this drug a suitable candidate for such a transition. Recently, two studies have shown that the bioavailability of voriconazole is substantially lower in patients. However, for both studies various factors that could influence the voriconazole serum concentration, such as inflammation, concomitant intake of food with oral voriconazole, and gastrointestinal complications, were not included in the evaluation. Therefore, in this study a retrospective chart review was performed in adult patients treated with both oral and i.v. voriconazole at the same dose and within a limited (≤5 days) time interval in order to evaluate the effect of switching the route of administration on voriconazole serum concentrations. A total of 13 patients were included. The mean voriconazole trough concentration was 2.28 mg/L [95% confidence interval (CI) 1.29-3.26 mg/L] for i.v. voriconazole administration and 2.04 mg/L (95% CI 0.78-3.30 mg/L) for oral administration. No significant difference was found in the mean oral and i.v. trough concentrations of voriconazole (P = 0.390). The mean bioavailability was 83.0% (95% CI 59.0-107.0%). These findings suggest that factors other than bioavailability may cause the observed difference in voriconazole trough concentrations between oral and i.v. administration in the earlier studies and stress the need for an antimicrobial stewardship team to guide voriconazole dosing. Copyright © 2016 Elsevier B.V. and International Society of Chemotherapy. All rights reserved.
Rheology and microrheology of materials at the air-water interface
NASA Astrophysics Data System (ADS)
Walder, Robert Benjamin
2008-10-01
The study of materials at the air-water interface is an important area of research in soft condensed matter physics. Films at the air-water interface have been a system of interest to physics, chemistry and biology for the last 20 years. The unique properties of these surface films provide ideal models for 2-d films, surface chemistry and provide a platform for creating 2 dimensional analogue materials to cellular membranes. Measurements of the surface rheology of cross-linked F-actin networks associated with a lipid monolayer at the air-water interface of a Langmuir monolayer have been performed. The rheological measurements are made using a Couette cell. These data demonstrate that the network has a finite elastic modulus that grows as a function of the cross-linking concentration. We also note that under steady-state flow the system behaves as a power law fluid in which the effective viscosity decreases with imposed shear. A Langmuir monolayer trough that is equipped for simultaneous microrheology and standard rheology measurements has been constructed. The central elements are the trough itself with a full range of optical tools accessing the air-water interface from below the trough and a portable knife-edge torsion pendulum that can access the interface from above. The ability to simultaneously measure the mechanical response of Langmuir monolayers on very different length scales is an important step for our understanding of the mechanical response of two-dimensional viscoelastic networks. The optical tweezer microrheometer is used to study the micromechanical properties of Langmuir monolayers. Microrheology measurements are made a variety of surface pressures that correspond to different ordered phases of the monolayer. The complex shear modulus shows an order of magnitude increase for the liquid condensed phase of DPPC compared to the liquid expanded phase.
Cambrian potential indicated in Kentucky Rome trough
DOE Office of Scientific and Technical Information (OSTI.GOV)
Harris, D.C.; Drahovzal, J.A.
1996-02-19
This paper reviews recent gas discoveries in the Kentucky Rome trough and the implications for future developments. It reviews the geology and stratigraphy of this structure and identifies the potential zones of production and trapping mechanisms. It provides results from geologic logs and seismic data to provide cross sectional and structural interpretations. Finally it discusses the gas composition of natural gas recovered from the basin.
Concentrating Solar Power Projects - Parabolic Trough Projects |
Project Godawari Solar Project Gujarat Solar One Gulang 100MW Thermal Oil Parabolic Trough project Guzmán Kuraymat (ISCC Kuraymat) Kathu Solar Park KaXu Solar One KVK Energy Solar Project La Africana La Dehesa La Power Facility Nevada Solar One (NSO) NOOR I NOOR II Olivenza 1 Orellana Palma del RÃo I Palma del RÃo
Temporal variability of the Circumpolar Deep Water inflow onto the Ross Sea continental shelf
NASA Astrophysics Data System (ADS)
Castagno, Pasquale; Falco, Pierpaolo; Dinniman, Michael S.; Spezie, Giancarlo; Budillon, Giorgio
2017-02-01
The intrusion of Circumpolar Deep Water (CDW) is the primary source of heat, salt and nutrients onto Antarctica's continental shelves and plays a major role in the shelf physical and biological processes. Different studies have analyzed the processes responsible for the transport of CDW across the Ross Sea shelf break, but until now, there are no continuous observations that investigate the timing of the intrusions. Also, few works have focused on the effect of the tides that control these intrusions. In the Ross Sea, the CDW intrudes onto the shelf in several locations, but mostly along the troughs. We use hydrographic observations and a mooring placed on the outer shelf in the middle of the Drygalski Trough in order to characterize the spatial and temporal variability of CDW inflow onto the shelf. Our data span from 2004 to the beginning of 2014. In the Drygalski Trough, the CDW enters as a 150 m thick layer between 250 and 400 m, and moves upward towards the south. At the mooring location, about 50 km from the shelf break, two main CDW cores can be observed: one on the east side of the trough spreading along the west slope of Mawson Bank from about 200 m to the bottom and the other one in the central-west side from 200 m to about 350 m depth. A signature of this lighter and relatively warm water is detected by the instruments on the mooring at bottom of the Drygalski Trough. High frequency periodic CDW intrusion at the bottom of the trough is related to the diurnal and spring/neap tidal cycles. At lower frequency, a seasonal variability of the CDW intrusion is noticed. A strong inflow of CDW is observed every year at the end of December, while the CDW inflow is at its seasonal minimum during the beginning of the austral fall. In addition an interannual variability is also evident. A change of the CDW intrusion before and after 2010 is observed.
Palaeo-ice stream pathways in the easternmost Amundsen Sea Embayment, West Antarctica
NASA Astrophysics Data System (ADS)
Klages, Johann P.; Kuhn, Gerhard; Graham, Alastair G. C.; Smith, James A.; Hillenbrand, Claus-Dieter; Nitsche, Frank O.; Larter, Rob D.; Gohl, Karsten
2015-04-01
Multibeam swath bathymetry datasets collected over the past two decades have been compiled to identify palaeo-ice stream pathways in the easternmost Amundsen Sea Embayment. We mapped 3010 glacial landforms to reconstruct palaeo-ice flow in the ~250 km-long Abbot Glacial Trough that was occupied by a large palaeo-ice stream, fed by two tributaries (Cosgrove and Abbot) that reached the continental shelf edge during the last maximum ice-sheet advance. The mapping has enabled a clear differentiation between glacial landforms interpreted as indicative of wet- (e.g. mega-scale glacial lineations) and cold-based ice (e.g. hill-hole pairs) during the last glaciation of the continental shelf. Both the regions of fast palaeo-ice flow within the palaeo-ice stream troughs, and the regions of slow palaeo-ice flow on adjacent seafloor highs (referred to as inter-ice stream ridges) additionally record glacial landforms such as grounding-zone wedges and recessional moraines that indicate grounding line stillstands of the ice sheet during the last deglaciation from the shelf. As the palaeo-ice stream flowed along a trough with variable geometry and variable subglacial substrate, it appears that trough sections characterized by constrictions and outcropping hard substrate that changes the bed gradient, led the pace of grounding-line retreat to slow and subsequently pause, resulting in the deposition of grounding-zone wedges. The stepped retreat recorded within the Abbot Glacial Trough corresponds well to post-glacial stepped retreat interpreted for the neighbouring Pine Island-Thwaites Palaeo-Ice Stream trough, thus suggesting a uniform pattern of episodic retreat across the eastern Amundsen Sea Embayment. The correlation of episodic retreat features with geological boundaries further emphasises the significance of subglacial geology in steering ice stream flow. Our new geomorphological map of the easternmost Amundsen Sea Embayment resolves the pathways of palaeo-ice streams that were probably all active during the last maximum extent of the ice sheet on this part of the shelf, and reveals the style of postglacial grounding-line retreat. Both are important input variables in ice sheet models and therefore can be used for validating the reliability of these models.
Vollmar, Johanna; Bellmann, Maren Christina; Darstein, Felix; Hoppe-Lotichius, Maria; Mittler, Jens; Heise, Michael; Rüttger, Bernd; Weyer, Veronika; Zimmermann, Anca; Lang, Hauke; Galle, Peter R; Zimmermann, Tim
2015-01-01
Background Expensive pharmaceuticals are a major reason for cost intensive health care systems. Long-term immunosuppressive therapy plays a relevant role after organ transplantation. Patents of original drugs have expired and cheaper products are available. Little data are available regarding efficacy and safety of generic immunosuppressive agents. Methods In this prospective study, 25 patients, who were clinically stable for a minimum of 2 years after liver transplantation, were converted from the original formulations of tacrolimus (TAC) and mycophenolate mofetil to the generics Tacpan® (TAP) and Mowel® (MOW). Patients were followed-up for 6 months. Results were compared retrospectively to 25 age- and sex-matched controls treated with the original brands. Results In the matched-pair analysis of TAC trough level/dose ratio, no significant difference was found between TAP/MOW and TAC/mycophenolate mofetil groups. No acute rejection occurred in either group. In total, 17 patients reported mild side effects in the TAP/MOW group. The most common side effects were gastrointestinal symptoms. Intra-individual analysis of costs revealed a considerable cost reduction in the TAP/MOW group (in median 25.03%; P<0.001). Conclusion In summary, the use of the generics TAP/MOW is effective and seems to be safe and cost-efficient in stable liver-transplantation patients. PMID:26604701
NASA Technical Reports Server (NTRS)
Comfort, Richard H.; Horwitz, James L.
1993-01-01
During the course of this grant, work was performed on a variety of topics and there were a number of significant accomplishments. A summary of these accomplishments is included. The topics studied include empirical model data base, data reduction for archiving, semikinetic modeling of low energy plasma in the inner terrestrial magnetosphere and ionosphere, O(+) outflows, equatorial plasma trough, and plasma wave ray-tracing studies. A list of publications and presentations which have resulted from this research is also included.
Climatology of atmospheric circulation patterns of Arabian dust in western Iran.
Najafi, Mohammad Saeed; Sarraf, B S; Zarrin, A; Rasouli, A A
2017-08-28
Being in vicinity of vast deserts, the west and southwest of Iran are characterized by high levels of dust events, which have adverse consequences on human health, ecosystems, and environment. Using ground based dataset of dust events in western Iran and NCEP/NCAR reanalysis data, the atmospheric circulation patterns of dust events in the Arabian region and west of Iran are identified. The atmospheric circulation patterns which lead to dust events in the Arabian region and western Iran were classified into two main categories: the Shamal dust events that occurs in warm period of year and the frontal dust events as cold period pattern. In frontal dust events, the western trough or blocking pattern at mid-level leads to frontogenesis, instability, and air uplift at lower levels of troposphere in the southwest of Asia. Non-frontal is other pattern of dust event in the cold period and dust generation are due to the regional circulation systems at the lower level of troposphere. In Shamal wind pattern, the Saudi Arabian anticyclone, Turkmenistan anticyclone, and Zagros thermal low play the key roles in formation of this pattern. Summer and transitional patterns are two sub-categories of summer Shamal wind pattern. In summer trough pattern, the mid-tropospheric trough leads to intensify the surface thermal systems in the Middle East and causes instability and rising of wind speed in the region. In synthetic pattern of Shamal wind and summer trough, dust is created by the impact of a trough in mid-levels of troposphere as well as existing the mentioned regional systems which are contributed in formation of summer Shamal wind pattern.
Morphology and sedimentology of glacigenic submarine fans on the west Greenland continental margin
NASA Astrophysics Data System (ADS)
O'Cofaigh, Colm; Hogan, Kelly A.; Dowdeswell, Julian A.; Jennings, Anne E.; Noormets, Riko; Evans, Jeffrey
2014-05-01
Along the West Greenland continental margin adjoining Baffin Bay, bathymetric data show a series of large submarine fans located at the mouths of cross-shelf troughs. Two of these fans, the Uummannaq Fan and the Disko Fan are trough-mouth fans built largely of debris delivered from ice sheet outlets of the Greenland Ice Sheet during past glacial maxima. On the Uummannaq Fan glacigenic debris flow deposits occur on the upper slope and extend to at least 1800 m water depth in front of the trough-mouth. The debris flow deposits are related to the remobilisation of subglacial debris that was delivered onto the upper slope at times when an ice stream was positioned at the shelf edge. In contrast, sedimentary facies from the northern sector of the fan are characterised by hemipelagic and ice-rafted sediments and turbidites; glacigenic debris flows are notably absent in cores from this region. Further south along the Greenland continental margin the surface of the Disko Fan is prominently channelised and associated sediments are acoustically stratified. Although glacigenic debris flow deposits do occur on the upper Disko Fan, sediments recovered in cores from elsewhere on the fan record the influence of turbidity current and meltwater sedimentation. The channelised form of the Disko fan contrasts markedly with that of the Uummannaq Fan and, more widely, with trough mouth fans from the Polar North Atlantic. Collectively these data highlight the variability of glacimarine depositional processes operating on trough-mouth fans on high-latitude continental slopes and show that glacigenic debris flows are but one of a number of mechanisms by which such large glacially-influenced depocentres form.
2013-06-21
ISS036-E-011034 (21 June 2013) --- The Salton Trough is featured in this image photographed by an Expedition 36 crew member on the International Space Station. The Imperial and Coachella Valleys of southern California – and the corresponding Mexicali Valley and Colorado River Delta in Mexico – are part of the Salton Trough, a large geologic structure known to geologists as a graben or rift valley that extends into the Gulf of California. The trough is a geologically complex zone formed by interaction of the San Andreas transform fault system that is, broadly speaking, moving southern California towards Alaska; and the northward motion of the Gulf of California segment of the East Pacific Rise that continues to widen the Gulf of California by sea-floor spreading. According to scientists, sediments deposited by the Colorado River have been filling the northern rift valley (the Salton Trough) for the past several million years, excluding the waters of the Gulf of California and providing a fertile environment – together with irrigation—for the development of extensive agriculture in the region (visible as green and yellow-brown fields at center). The Salton Sea, a favorite landmark of astronauts in low Earth orbit, was formed by an irrigation canal rupture in 1905, and today is sustained by agricultural runoff water. A wide array of varying landforms and land uses in the Salton Trough are visible from space. In addition to the agricultural fields and Salton Sea, easily visible metropolitan areas include Yuma, AZ (lower left); Mexicali, Baja California, Mexico (center); and the San Diego-Tijuana conurbation on the Pacific Coast (right). The approximately 72-kilometer-long Algodones Dunefield is visible at lower left.
Burkhauser, R V; Cutts, A C; Lillard, D R
1999-09-01
The goal of the study was to show that cross-sectional and longitudinal data yield dramatically different answers to a basic question: "How did older persons fare in the recovery years of the 1980s?" The United States Panel Study of Income Dynamics and the German Socio-Economic Panel are used cross-sectionally to capture changes in the economic well-being of older persons in the trough and peak years of the 1980s business cycle, and longitudinally to trace how the economic well-being of a given cohort of older persons changed over those years. Kernel density estimation is then used to show how the distribution of economic well-being of these populations changed over these years. Cross-sectional comparisons confirm that persons aged 65 and over in the peak year were better off than persons aged 65 and over in the trough year in both countries. Longitudinal comparisons, however, show that persons aged 65 and over in the trough year who survived to the peak year received a substantially smaller share of the rewards of economic recovery than cross-sectional comparisons imply. Moreover, the entire income distribution of older persons in the United States shifted downwards. Compositional changes in the cross-sectional data, caused by the entry of high-income persons who are young in the peak year but old in the trough year, obscure the decline in the economic well-being of the cohort of older persons who survived the trough year, in cross-sectional comparisons of older populations in the United States in the 1980s.
On Local Ionization Equilibrium and Disk Winds in QSOs
NASA Astrophysics Data System (ADS)
Pereyra, Nicolas A.
2014-11-01
We present theoretical C IV λλ1548,1550 absorption line profiles for QSOs calculated assuming the accretion disk wind (ADW) scenario. The results suggest that the multiple absorption troughs seen in many QSOs may be due to the discontinuities in the ion balance of the wind (caused by X-rays), rather than discontinuities in the density/velocity structure. The profiles are calculated from a 2.5-dimensional time-dependent hydrodynamic simulation of a line-driven disk wind for a typical QSO black hole mass, a typical QSO luminosity, and for a standard Shakura-Sunyaev disk. We include the effects of ionizing X-rays originating from within the inner disk radius by assuming that the wind is shielded from the X-rays from a certain viewing angle up to 90° ("edge on"). In the shielded region, we assume constant ionization equilibrium, and thus constant line-force parameters. In the non-shielded region, we assume that both the line-force and the C IV populations are nonexistent. The model can account for P-Cygni absorption troughs (produced at edge on viewing angles), multiple absorption troughs (produced at viewing angles close to the angle that separates the shielded region and the non-shielded region), and for detached absorption troughs (produced at an angle in between the first two absorption line types); that is, the model can account for the general types of broad absorption lines seen in QSOs as a viewing angle effect. The steady nature of ADWs, in turn, may account for the steady nature of the absorption structure observed in multiple-trough broad absorption line QSOs. The model parameters are M bh = 109 M ⊙ and L disk = 1047 erg s-1.
Nationwide conversion to generic tacrolimus in pediatric kidney transplant recipients.
Naicker, Derisha; Reed, Peter W; Ronaldson, Jane; Kara, Tonya; Wong, William; Prestidge, Chanel
2017-11-01
Bioequivalence between Tacrolimus Prograf® and generic tacrolimus formulations has been demonstrated in adult populations, however clinical experience and safety data regarding generic tacrolimus in pediatric transplant recipients is limited. This study aimed to evaluate conversion from Tacrolimus Prograf® to Sandoz® in pediatric renal transplant recipients nationwide. The primary outcome was a change in mean trough tacrolimus concentration. Additionally, changes in tacrolimus intra-patient coefficient of variation (CoV), allograft function, requirement for dose adjustments, and episodes of biopsy-proven rejection were evaluated. Retrospective cohort study in 37 pediatric renal transplant recipients who switched to Tacrolimus Sandoz®. Each patient had three pre-conversion tacrolimus trough and creatinine concentrations within the 4 months prior and three post-conversion concentrations on day 3, 10, and the next subsequent level. Mean pre- and post-conversion tacrolimus trough concentrations and glomerular filtration rate (eGFR) were calculated. Tacrolimus concentration, CoV, and creatinine differences were compared by paired t test. Thirty-seven patients (41% females, age 3-18 years) were included. Average intra-patient difference in trough tacrolimus concentration was 0.05μg/l (95% CI -0.37 to 0.47). Average intra-patient difference in eGFR was -1.20 ml/min/1.73 2 (95% CI -3.53 to 1.13). Three patients had acute rejection during 12 months post-conversion compared to none during 12 months pre-conversion. Pediatric renal transplant recipients can be converted from Tacrolimus Prograf® to Sandoz® with negligible change in trough concentration, dose adjustments, or immediate allograft function. Of concern was the number of acute rejection episodes, however non-adherence contributed to at least one episode and this difference was determined clinically and statistically not significant.
NASA Astrophysics Data System (ADS)
Byrnes, J. S.; Bezada, M.
2017-12-01
Melt can be retained in the mantle at triple junctions between grain boundaries, be spread in thin films along two-grain boundaries, or be organized by shear into elongate melt-rich bands. Which of these geometries is most prevalent is unknown. This ambiguity makes the interpretation of anomalous seismic velocities and quality factors difficult, since different geometries would result in different mechanical effects. Here, we compare observations of seismic attenuation beneath the Salton Trough and the Snake River Plain; two regions where the presence of melt has been inferred. The results suggest that seismic attenuation is diagnostic of melt geometry. We measure the relative attenuation of P waves from deep focus earthquakes using a time-domain method. Even though the two regions are underlain by comparably strong low-velocity anomalies, their attenuation signature is very different. The upper mantle beneath the Salton Trough is sufficiently attenuating that the presence of melt must lower Qp, while attenuation beneath the Snake River Plain is not anomalous with respect to surrounding regions. These seemingly contradictory results can be reconciled if different melt geometries characterize each region. SKS splitting from the Salton Trough suggests that melt is organized into melt-rich bands, while this is not the case for the Snake River Plain. We infer that beneath the Snake River Plain melt is retained at triple junctions between grain boundaries, a geometry that is not predicted to cause seismic attenuation. More elongate geometries beneath the Salton Trough may cause seismic attenuation via the melt-squirt mechanism. In light of these results, we conclude that prior observations of low seismic velocities with somewhat high quality factors beneath the East Pacific Rise and Southern California suggest that melt does not organize into elongate bands across much of the asthenosphere.
The nature of the crust under Cayman Trough from gravity
ten Brink, Uri S.; Coleman, D.F.; Dillon, William P.
2002-01-01
Considerable crustal thickness variations are inferred along Cayman Trough, a slow-spreading ocean basin in the Caribbean Sea, from modeling of the gravity field. The crust to a distance of 50 km from the spreading center is only 2–3 km thick in agreement with dredge and dive results. Crustal thickness increases to ∼5.5 km at distances between 100 and 430 km west of the spreading center and to 3.5–6 km at distances between 60 and 370 km east of the spreading center. The increase in thickness is interpreted to represent serpentinization of the uppermost mantle lithosphere, rather than a true increase in the volume of accreted ocean crust. Serpentinized peridotite rocks have indeed been dredged from the base of escarpments of oceanic crust rocks in Cayman Trough. Laboratory-measured density and P-wave speed of peridotite with 40–50% serpentine are similar to the observed speed in published refraction results and to the inferred density from the model. Crustal thickness gradually increases to 7–8 km at the far ends of the trough partially in areas where sea floor magnetic anomalies were identified. Basement depth becomes gradually shallower starting 250 km west of the rise and 340 km east of the rise, in contrast to the predicted trend of increasing depth to basement from cooling models of the oceanic lithosphere. The gradual increase in apparent crustal thickness and the shallowing trend of basement depth are interpreted to indicate that the deep distal parts of Cayman Trough are underlain by highly attenuated crust, not by a continuously accreted oceanic crust.
Kario, Kazuomi; Enya, Kazuaki; Sugiura, Kenkichi; Ikeda, Yoshinori
2014-01-01
Morning blood pressure (BP) surge is reported as a risk factor for cardiovascular events and end-organ damage independent of the 24-h BP level. Controlling morning BP surge is therefore important to help prevent onset of cardiovascular disease. We compared the efficacy of azilsartan and candesartan in controlling morning systolic BP (SBP) surges by analyzing relevant ambulatory BP monitoring data in patients with/without baseline BP surges. As part of a 16-week randomized, double-blind study of azilsartan (20–40 mg once daily) and candesartan (8–12 mg once daily) in Japanese patients with essential hypertension, an exploratory analysis was carried out using ambulatory BP monitoring at baseline and week 14. The effects of study drugs on morning BP surges, including sleep trough surge (early morning SBP minus the lowest night-time SBP) and prewaking surge (early morning SBP minus SBP before awakening), were evaluated. Patients with sleep trough surge of at least 35 mmHg were defined by the presence of a morning BP surge (the ‘surge group’). Sleep trough surge and prewaking surge data were available at both baseline and week 14 in 548 patients, 147 of whom (azilsartan 76; candesartan 71) had a baseline morning BP surge. In surge group patients, azilsartan significantly reduced both the sleep trough surge and the prewaking surge at week 14 compared with candesartan (least squares means of the between-group differences −5.8 mmHg, P=0.0395; and −5.7 mmHg, P=0.0228, respectively). Once-daily azilsartan improved sleep trough surge and prewaking surge to a greater extent than candesartan in Japanese patients with grade I–II essential hypertension. PMID:24710336
Rakugi, Hiromi; Kario, Kazuomi; Enya, Kazuaki; Sugiura, Kenkichi; Ikeda, Yoshinori
2014-06-01
Morning blood pressure (BP) surge is reported as a risk factor for cardiovascular events and end-organ damage independent of the 24-h BP level. Controlling morning BP surge is therefore important to help prevent onset of cardiovascular disease. We compared the efficacy of azilsartan and candesartan in controlling morning systolic BP (SBP) surges by analyzing relevant ambulatory BP monitoring data in patients with/without baseline BP surges. As part of a 16-week randomized, double-blind study of azilsartan (20-40 mg once daily) and candesartan (8-12 mg once daily) in Japanese patients with essential hypertension, an exploratory analysis was carried out using ambulatory BP monitoring at baseline and week 14. The effects of study drugs on morning BP surges, including sleep trough surge (early morning SBP minus the lowest night-time SBP) and prewaking surge (early morning SBP minus SBP before awakening), were evaluated. Patients with sleep trough surge of at least 35 mmHg were defined by the presence of a morning BP surge (the 'surge group'). Sleep trough surge and prewaking surge data were available at both baseline and week 14 in 548 patients, 147 of whom (azilsartan 76; candesartan 71) had a baseline morning BP surge. In surge group patients, azilsartan significantly reduced both the sleep trough surge and the prewaking surge at week 14 compared with candesartan (least squares means of the between-group differences -5.8 mmHg, P=0.0395; and -5.7 mmHg, P=0.0228, respectively). Once-daily azilsartan improved sleep trough surge and prewaking surge to a greater extent than candesartan in Japanese patients with grade I-II essential hypertension.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gray, M. H.; Tirawat, R.; Kessinger, K. A.
The roadmap to next-generation concentrating solar power plants anticipates a progression to central towers with operating temperatures in excess of 650°C. These higher temperatures are required to drive higher power-cycle efficiencies, resulting in lower cost energy. However, these conditions also place a greater burden on the materials making up the receiver. Any novel absorber material developed for next-generation receivers must be stable in air, cost effective, and survive thousands of heating and cooling cycles. The collection efficiency of a power tower plant can be increased if the energy absorbed by the receiver is maximized while the heat loss from themore » receiver to the environment is minimized. Thermal radiation losses can be significant (>7% annual energy loss) with receivers at temperatures above 650°C. We present progress toward highly efficient and durable solar selective absorbers (SSAs) intended for operating temperatures from 650°C to 1000°C. Selective efficiency (η sel) is defined as the energy retained by the absorber, accounting for both absorptance and emittance, relative to the energy incident on the surface. The low emittance layers of multilayer SSAs are binary compounds of refractory metals whose material properties indicate that coatings formed of these materials should be oxidation resistant in air to 800-1200°C. On this basis, we initially developed a solar selective coating for parabolic troughs. This development has been successfully extended to meet the absorptance and emittance objectives for the more demanding, high temperature regime. We show advancement in coating materials, processing and designs resulting in the initial attainment of target efficiencies η sel > 0.91 for proposed tower conditions. Additionally, spectral measurements show that these coatings continue to perform at targeted levels after cycling to temperatures of 1000°C in environments of nitrogen and forming gas.« less
Gray, M. H.; Tirawat, R.; Kessinger, K. A.; ...
2015-05-01
The roadmap to next-generation concentrating solar power plants anticipates a progression to central towers with operating temperatures in excess of 650°C. These higher temperatures are required to drive higher power-cycle efficiencies, resulting in lower cost energy. However, these conditions also place a greater burden on the materials making up the receiver. Any novel absorber material developed for next-generation receivers must be stable in air, cost effective, and survive thousands of heating and cooling cycles. The collection efficiency of a power tower plant can be increased if the energy absorbed by the receiver is maximized while the heat loss from themore » receiver to the environment is minimized. Thermal radiation losses can be significant (>7% annual energy loss) with receivers at temperatures above 650°C. We present progress toward highly efficient and durable solar selective absorbers (SSAs) intended for operating temperatures from 650°C to 1000°C. Selective efficiency (η sel) is defined as the energy retained by the absorber, accounting for both absorptance and emittance, relative to the energy incident on the surface. The low emittance layers of multilayer SSAs are binary compounds of refractory metals whose material properties indicate that coatings formed of these materials should be oxidation resistant in air to 800-1200°C. On this basis, we initially developed a solar selective coating for parabolic troughs. This development has been successfully extended to meet the absorptance and emittance objectives for the more demanding, high temperature regime. We show advancement in coating materials, processing and designs resulting in the initial attainment of target efficiencies η sel > 0.91 for proposed tower conditions. Additionally, spectral measurements show that these coatings continue to perform at targeted levels after cycling to temperatures of 1000°C in environments of nitrogen and forming gas.« less
High-temperature solar receiver integrated with a short-term storage system
NASA Astrophysics Data System (ADS)
Giovannelli, Ambra; Bashir, Muhammad Anser; Archilei, Erika Maria
2017-06-01
Small-Scale Concentrated Solar Power Plants could have a potential market for off-grid applications in rural contexts with limited access to the electrical grid and favorable environmental characteristics. Some Small-Scale plants have already been developed, like the 25-30 kWe Dish-Stirling engine. Other ones are under development as, for example, plants based on Parabolic Trough Collectors coupled with Organic Rankine Cycles. Furthermore, the technological progress achieved in the development of new small high-temperature solar receiver, makes possible the development of interesting systems based on Micro Gas Turbines coupled with Dish collectors. Such systems could have several advantages in terms of costs, reliability and availability if compared with Dish-Stirling plants. In addition, Dish-Micro Gas Turbine systems are expected to have higher performance than Solar Organic Rankine Cycle plants. The present work focuses the attention on some challenging aspects related to the design of small high-temperature solar receivers for Dish-Micro Gas Turbine systems. Natural fluctuations in the solar radiation can reduce system performance and damage seriously the Micro Gas Turbine. To stabilize the system operation, the solar receiver has to assure a proper thermal inertia. Therefore, a solar receiver integrated with a short-term storage system based on high-temperature phase-change materials is proposed in this paper. Steady-state and transient analyses (for thermal storage charge and discharge phases) have been carried out using the commercial CFD code Ansys-Fluent. Results are presented and discussed.
Sirolimus Pharmacokinetics in Early Postmyeloablative Pediatric Blood and Marrow Transplantation
Goyal, Rakesh K.; Han, Kelong; Wall, Donna A.; Pulsipher, Michael A.; Bunin, Nancy; Grupp, Stephan A.; Mada, Sripal R.; Venkataramanan, Raman
2014-01-01
This study examined the pharmacokinetics of sirolimus in pediatric allogeneic blood and marrow transplantation (BMT) recipients in the presence and absence of concomitant fluconazole. Forty pediatric BMT recipients received a daily oral dose of sirolimus and a continuous i.v. infusion of tacrolimus for graft-versus-host disease prophylaxis. Fluconazole was administered i.v. to 19 patients and orally to 6 patients. Full pharmacokinetic profiles of sirolimus within a single dosing interval were collected. Whole-blood sirolimus concentrations were measured by HPLC/mass spectrometry. Noncompartmental analysis was performed using WinNonlin. Nonlinear mixed-effects pharmacokinetic models were developed using NONMEM following standard procedures. The mean ± SD sirolimus trough level before the dose (C0) was 8.0 ± 4.6 ng/mL (range, 1.8–21.6 ng/mL). The peak concentration was 19.9 ± 11.8 ng/mL (range, 3.9–46.1 ng/mL), and the trough level 24 hours later (C24) was 9.1 ± 5.3 ng/mL (range, 1.0–19.1 ng/mL). The terminal disposition half-life (T1/2) was 24.5 ± 11.2 hours (range, 5.8–53.2 hours), and the area under the concentration-versus-time curve (AUC0–24) was 401.1 ± 316.3 ng·h/mL (range, 20.7–1332.3 ng·h/mL). In patients at steady state, C0 and C24 were closely correlated (R2 = 0.77) with a slope of 0.99, indicating the achievement of steady state. C24 was 1.7-fold greater (P = .036) and AUC0–24 was 2-fold greater (P = .012) in Caucasian patients (n = 22) compared with Hispanic patients (n = 9). The average apparent oral clearance was 3-fold greater (P = .001) and the apparent oral volume of distribution was 2-fold greater (P = .018) in patients age ≤12 years compared with those age >12 years. C24 was significantly lower in patients (n = 10) who developed grade III–IV aGVHD (n = 10) than in those with grade 0-II aGVHD (n = 22) (6.1 ± 2.9 ng/mL versus 9.4 ± 5.5 ng/mL; P = .044). Dose-normalized sirolimus trough concentrations were significantly higher in patients receiving concomitant fluconazole therapy compared with those not receiving fluconazole (C0: 3.9 ± 2.5 versus 2.4 ± 1.5 ng/mL/mg, P = .030; C24: 4.8 ± 3.3 versus 2.5 ± 1.7 ng/mL/mg, P = .018). This pharmacokinetic study of sirolimus in pediatric patients documents a large interindividual variability in the exposure of sirolimus. Steady-state trough blood concentrations were correlated with drug exposure. Trough concentrations were higher with a concomitant use of fluconazole and were higher in Caucasian patients than in Hispanic patients. Oral clearance was greater in children age ≤12 years than in older children and adolescents. With therapeutic drug monitoring, the majority (79%) of sirolimus trough levels could be maintained within the target range (3–12 ng/mL). This study provides a rationale and support for dose adjustments of sirolimus based on steady-state blood concentrations aimed at achieving a target concentration to minimize toxicity and maximize therapeutic benefits in pediatric BMT recipients. PMID:23266742
Gibson, D.L.
2000-01-01
Previously undated post-Devonian sediments outcropping north of Fowlers Gap station near the western margin of the Bancannia Trough are shown by plant macro- and microfossil determinations to be of Early Cretaceous (most likely Neocomian and/or Aptian) age, and thus part of the Eromanga Basin. They are assigned to the previously defined Telephone Creek Formation. Study of the structural configuration of this unit and the unconformably underlying Devonian rocks suggests that the gross landscape architecture of the area results from post-Early Cretaceous monoclinal folding along blind faults at the western margin of the trough, combined with the effects of differential erosion. This study shows that, while landscape evolution in the area has been dynamic, the major changes that have occurred are on a geological rather than human timescale.
Element of an inductive coupler
Hall, David R.; Fox, Joe
2006-08-15
An element for an inductive coupler in a downhole component comprises magnetically conductive material, which is disposed in a recess in annular housing. The magnetically conductive material forms a generally circular trough. The circular trough comprises an outer generally U-shaped surface, an inner generally U-shaped surface, and two generally planar surfaces joining the inner and outer surfaces. The element further comprises pressure relief grooves in at least one of the surfaces of the circular trough. The pressure relief grooves may be scored lines. Preferably the pressure relief grooves are parallel to the magnetic field generated by the magnetically conductive material. The magnetically conductive material is selected from the group consisting of soft iron, ferrite, a nickel iron alloy, a silicon iron alloy, a cobalt iron alloy, and a mu-metal. Preferably, the annular housing is a metal ring.
Modulations of Driven Nonlinear Surface Waves on Water and Liquid Helium-4.
1985-06-01
loop to control drive amplitude. 63 CHAPTER III. DATA AND INTERPRETATION. Section 5. Cockscombs. 25. Cockscomb in water at f/30. 67 26. Double...annular trough, sealed and then partially filled with normal or superfluid helium, is oscillated vertically and supported 6 . . ... . . . . . 41 700...44 0 .0 0 00 loudspeaker surface wave sealed trough transducer shel oo •Figure 3. Schmatic of the helium experiment. 8 r
Current status of the western gray squirrel population in the Puget Trough, Washington.
R. Bayrakci; A.B. Carey; T.M. Wilson
2001-01-01
The Puget Trough population of Washingtonâs state-threatened western gray squirrel is centered in Oregon white oak ecotones adjacent to conifer forests and prairies on the Fort Lewis Military Reservation. Our goal was to determine the current status of western gray squirrels in this region. In 1998, we found five western gray squirrels in 538 hours of foot surveys in...
NASA Astrophysics Data System (ADS)
Gauthier, N.; Claud, C.; Funatsu, B. M.; Chaboureau, J.-P.; Argence, S.; Lambert, D.; Richard, E.; Hauchecorne, A.; Arbogast, P.; Maynard, K.
2009-09-01
Heavy precipitation events over the Mediterranean Sea are generally associated with upper-level troughs. The mesoscale structures of such troughs are however not well reproduced by the atmospheric analyses due to inappropriate spatial resolution. We propose here to use a semi-Lagrangian advection model called MIMOSA (Modélisation Isentrope du transport Méso-échelle de l'Ozone Stratosphérique par Advection) initially developed to describe stratospheric filaments, to calculate fine-scale Potential Vorticity (PV) fields on isentropic surfaces near the tropopause. After a description of MIMOSA, we will focus on the model-generated PV fields for several high impact weather cases that occurred over the Western Mediterreanean Sea. We will demonstrate the ability of MIMOSA to resolve fine scale structures of upper-level troughs considering the Algiers' flash flood, which occurred on November 2001, and then a heavy precipitation event over southeast France on the 5-6 September 2005. Finally, with a PV inversion method, we will show the impact of the fine scales PV structures as depicted by MIMOSA to improve the numerical simulation of a « hurricane » that hit Italy in September 2006, both in terms of surface pressure and precipitation forecasts.
Microbial Community in the Hydrothermal System at Southern Mariana Trough
NASA Astrophysics Data System (ADS)
Kato, S.; Itahashi, S.; Kakegawa, T.; Utsumi, M.; Maruyama, A.; Ishibashi, J.; Marumo, K.; Urabe, T.; Yamagishi, A.
2004-12-01
There is unique ecosystem around deep-sea hydrothermal area. Living organisms are supported by chemical free energy provided by the hydrothermal water. The ecosystem is expected to be similar to those in early stage of life history on the earth, when photosynthetic organisms have not emerged. In this study, we have analyzed the microbial diversity in the hydrothermal area at southern Mariana trough. In the "Archaean Park Project" supported by special Coordination Fund, four holes were bored and cased by titanium pipes near hydrothermal vents in the southern Mariana trough in 2004. Hydrothermal fluids were collected from these cased holes and natural vents in this area. Microbial cells were collected by filtering the hydrothermal fluid in situ or in the mother sip. Filters were stored at -80C and used for DNA extraction. Chimneys at this area was also collected and stored at -80C. The filters and chimney samples were crushed and DNA was extracted. DNA samples were used for amplification of 16S rDNA fragments by PCR using archaea specific primers and universal primers. The PCR fragments were cloned and sequenced. These PCR clones of different samples will be compared. We will extend our knowledge about microbiological diversity at Southern Mariana trough to compare the results obtained at other area.
Inductive coupler for downhole components and method for making same
Hall, David R.; Hall, Jr., H. Tracy; Pixton, David S.; Dahlgren, Scott; Briscoe, Michael A.; Sneddon, Cameron; Fox, Joe
2006-05-09
The present invention includes a method of making an inductive coupler for downhole components. The method includes providing an annular housing, preferably made of steel, the housing having a recess. A conductor, preferably an insulated wire, is also provided along with a plurality of generally U-shaped magnetically conducting, electrically insulating (MCEI) segments. Preferably, the MCEI segments comprise ferrite. An assembly is formed by placing the plurality of MCEI segments within the recess in the annular housing. The segments are aligned to form a generally circular trough. A first portion of the conductor is placed within the circular trough. This assembly is consolidated with a meltable polymer which fills spaces between the segments, annular housing and the first portion of the conductor. The invention also includes an inductive coupler including an annular housing having a recess defined by a bottom portion and two opposing side wall portions. At least one side wall portion includes a lip extending toward but not reaching the other side wall portion. A plurality of generally U-shaped MCEI segments, preferably comprised of ferrite, are disposed in the recess and aligned so as to form a circular trough. The coupler further includes a conductor disposed within the circular trough and a polymer filling spaces between the segments, the annular housing and the conductor.
Difference of the seismic structure between the Hyuga-nada and the Nankai seismogenic segments
NASA Astrophysics Data System (ADS)
Yamamoto, Y.; Obana, K.; Takahashi, T.; Nakanishi, A.; Kodaira, S.; Kaneda, Y.
2010-12-01
In the Nankai Trough, three major seismogenic zones of megathrust earthquake exist (Tokai, Tonankai and Nankai earthquake regions). The Hyuga-nada region was distinguished from these seismogenic zones because of the lack of megathrust earthquake. In the Hyuga-nada region, interplate earthquakes of M~7 occur repeatedly at intervals of about 20 years whereas no megathrust (M > 8) earthquakes had been recognized up to now. However, recent studies show the possibility of simultaneous rupture of the Tokai, Tonankai, Nankai and Hyuga-nada segments was also pointed out [e.g., Hori et al., 2009 AOGS]. To understand the possibility of seismic linkage of Nankai and Hyuga-nada segments, Japan Agency for Marine-Earth Science and Technology has been carried out a wide-angle active source survey and local seismic observation in the western end of the Nankai seismogenic zone, as a part of Research concerning Interaction Between the Tokai, Tonankai and Nankai Earthquakes' funded by Ministry of Education, Culture, Sports, Science and Technology, Japan. Nakanishi et al [2009, AGU] showed that subducting Philippine Sea Plate can be divided into three zones and there is the zone of the thin oceanic crust of the subducting Philippine Sea Plate between Nankai segment and Kyushu-Palau Ridge segment by analyzing of the active source survey. Deep structure of the subducting slab is also important to consider the possibility of the seismic linkage and the location of the boundary among three zones described above. To obtain the deep seismic image, we performed a three-dimensional seismic tomography using the local seismic data recorded on 158 ocean bottom seismographs and 105 land seismic stations. From these data, we could detect 1141 earthquakes in the Hyuga-nada region. From the result of hypocenter relocation, microseismicity near the trough axis is active on the western part of the ‘thin oceanic crust’, whereas inactive on the eastern part. Besides, velocity structure of the uppermost part of the subducting slab mantle shows spatial heterogeneities. In the thin oceanic crust zone, high velocity slab mantle is imaged from near the trough to coastline. On the other hands, there is low velocity zone in the slab mantle near the trough axis in the Kyusyu-Palau Ridge segment. This low velocity zone may be related to the location of the eastern end of subducted Kyusyu-Palau Ridge.
Exploration Method Development for hydrothermal plume hunting by XCTD
NASA Astrophysics Data System (ADS)
Kitagawa, Y.; Ikeda, M.; Kadoshima, K.; Koizumi, Y.; Nakano, J.; Asakawa, E.; Sumi, T.
2017-12-01
J-MARES (Research and Development Partnership for Next Generation Technology of Marine Resources Survey, JAPAN) has been designing a low-cost and high-efficiency exploration system for seafloor hydrothermal massive sulfide deposits in "Cross-ministerial Strategic Innovation Promotion Program (SIP)" granted by the Cabinet Office, Government of Japan since 2014. We proposed hydrothermal plume hunting by XCTD (eXpendables Conductivity, Temperature and Depth). We applied this method to an area of interest more than 100km x 100km over Okinawa Trough, including some known seafloor massive sulfide deposits. Generally, hydrothermal plume exploration has been by ship mounted with MBES (Multi Beam Echo Sounder) or AUV with sound anomaly observation. However, these methods have to charter the sophisticated ship costly. On the other hand, throw-in type water quality meters (eg. XCTD and XBT) can be low-cost and easily operable. Moreover, that can make a quick look at seawater temperature and conductivity even in rough waters.Firstly, we confirmed XCTD probes position on the seafloor by ROV mounted deep-sea high vision camera. As a result of the test, probes swept downstream about 40 m in horizontal distance from throwing positions with about 1,600m in water depth. Following the previous test results, we had performed to the next test that confirmed detection range of hydrothermal plume at the chimney of North Mound in Izena Cauldron, so we had caught anomaly of seawater temperature and conductivity successfully which could be possibly derived from hydrothermal activities. Although averaged seawater temperature at a depth of 1500 m or more was about 3.95 degrees C, near the chimney was about 4.93 degrees C. The temperature anomalies originated from the hydrothermal plumes could be distributed at most 30m in horizontal distance and became smaller away from the chimney. Moreover, temperature anomaly mass of sea water tended to move upward in depth with distance away from the chimney.
Aero-acoustic Properties of Eroded Airfoils of Compressor Blades for Use in Non-invasive Diagnostics
NASA Astrophysics Data System (ADS)
Drãgan, Valeriu; Grad, Danuţa
2013-09-01
The current techniques for investigating the erosion of turbo machineries rely on visual inspections trough boroscopy. However this implies shutting down the power plant in order to make the assessment which leads to operational costs and difficulties. This paper aims to provide a method for monitoring the erosion state of a bladed power plant operated in dusty environments such as the desert by measuring the changes in its acoustic spectrum. The method used for this study is numerical and the findings suggest that there are significant modifications to both the flow field and the acoustic parameters as the blade gets progressively eroded. This paves the way for the development of non-invasive permanent real time diagnostics for turbine engines and power plants.
Dawn Arrives at Vesta: The Smallest Terrestrial Planet
NASA Astrophysics Data System (ADS)
Russell, C. T.; Raymond, C. A.; Coradini, A.; Nathues, A.; De Sanctis, M. C.; Prettyman, T. H.; Jaumann, R.; McSween, H. Y.; McCord, T. B.; Keller, H. U.; Rayman, M.
2011-12-01
The Dawn Mission is a revolutionary concept in planetary exploration. Within the cost cap of a low-cost Discovery mission, a spacecraft has been flown to the main asteroid belt and been put into orbit around its second most massive body, 4 Vesta. Vesta was clearly beginning its march to planet-hood when its accretion stopped, most probably by the formation of Jupiter. Dawn's exploration is enabled by an ion propulsion system that will not only allow Dawn to descend to 200 km altitude, but to leave Vesta, travel to and orbit 1 Ceres in 2015 and map this largest main belt asteroid, a dwarf planet. The initial images of the surface of Vesta have been astounding. They reveal the diverse geochemical processes driven by the internal heat of this 530 km diameter body and titanic forces that have battered Vesta for over 4.65 billion years. A large southern impact structure, troughs ringing the equator, striped craters, dark albedo features contrasting with very high albedo features and a richly colored surface distinguish this most unusual small world.
New dual asymmetric CEC linear Fresnel concentrator for evacuated tubular receivers
NASA Astrophysics Data System (ADS)
Canavarro, Diogo; Chaves, Julio; Collares-Pereira, Manuel
2017-06-01
Linear Fresnel Reflector concentrators (LFR) are a potential solution for low-cost electricity production. Nevertheless in order to become more competitive with other CSP (Concentrated Solar Power) technologies, in particular with the Parabolic Trough concentrator, their overall solar to electricity efficiencies must increase. A possible path to achieve this goal is to increase the concentration factor, hence increasing the working temperatures for higher thermodynamic efficiency (more energy collection) and decrease the total number of rows of the solar field (less parasitic losses and corresponding cost reduction). This paper presents a dual asymmetric CEC-type (Compound Elliptical Concentrator) LFR (Linear Fresnel Concentrator) for evacuated tubular receivers. The concentrator is designed for a high concentration factor, presenting an asymmetric configuration enabling a very compact solution. The CEC-type secondary mirror is introduced to accommodate very high concentration values with a wide enough acceptance-angle (augmenting optical tolerances) for simple mechanical tracking solutions, achieving a higher CAP (Concentration Acceptance Product) in comparison with conventional LFR solutions. The paper presents an optical and thermal analysis of the concentrator using two different locations, Faro (Portugal) and Hurghada (Egypt).
Williet, Nicolas; Boschetti, Gilles; Fovet, Marion; Di Bernado, Thomas; Claudez, Pierre; Del Tedesco, Emilie; Jarlot, Camille; Rinaldi, Leslie; Berger, Anne; Phelip, Jean-Marc; Flourie, Bernard; Nancey, Stéphane; Paul, Stéphane; Roblin, Xavier
2017-11-01
We investigated whether serum trough levels of vedolizumab, a humanized monoclonal antibody against integrin α4β7, during the induction phase of treatment can determine whether patients will need additional doses (optimization of therapy) within the first 6 months. We conducted an observational study of 47 consecutive patients with Crohn's disease (CD; n = 31) or ulcerative colitis (UC; n = 16) who had not responded to 2 previous treatment regimens with antagonists of tumor necrosis factor and were starting therapy with vedolizumab at 2 hospitals in France, from June 2014 through April 2016. All patients were given a 300-mg infusion of vedolizumab at the start of the study, Week 2, Week 6, and then every 8 weeks; patients were also given corticosteroids during the first 4-6 weeks. Patients not in remission at Week 6 were given additional doses of vedolizumab at Week 10 and then every 4 weeks (extended therapy or optimization). Remission at Week 6 of treatment was defined as CD activity score below 150 points for patients with CD and a partial Mayo Clinic score of <3 points, without concomitant corticosteroids, for patients with UC. Blood samples were collected each week and serum levels of vedolizumab and antibodies against vedolizumab were measured using an enzyme-linked immunosorbent assay. Median trough levels of vedolizumab and interquartile ranges were compared using the nonparametric Mann-Whitney test. The primary objective was to determine whether trough levels of vedolizumab measured during the first 6 weeks of induction therapy associated with the need for extended treatment within the first 6 months. Based on response to therapy at Week 6, extended treatment was required for 30 of the 47 patients (23 patients with CD and 7 patients with UC). At Week 2, trough levels of vedolizumab for patients selected for extended treatment were 23.0 μg/mL (interquartile range, 14.0-37.0 μg/mL), compared with 42.5 μg/mL in patients who did not receive extended treatment (interquartile range, 33.5-50.7; P = .15). At Week 6, trough levels of vedolizumab <18.5 μg/mL were associated with need for extended therapy (100% positive predictive value, 46.2%; negative predictive value; area under the receiver operating characteristic curve, 0.72) within the first 6 months. Among patients who required extended treatment at Week 10, all of those with trough levels of vedolizumab <19.0 μg/mL at Week 6 had achieved clinical remission 4 weeks later (secondary responders). In a prospective study of patients with CD or UC receiving induction therapy with vedolizumab, low trough levels of vedolizumab at Week 6 (<19.0 μg/mL) are associated with need for additional doses (given at Week 10 and then every 4 weeks). All patients receiving these additional doses achieved a clinical response 4 weeks later. Copyright © 2017 AGA Institute. Published by Elsevier Inc. All rights reserved.
NASA Astrophysics Data System (ADS)
Horvath, Anita; Bada, Gabor; Szafian, Peter; Sztano, Orsolya; Law, Ben; Wallis, Rod
2010-05-01
The latest phase exploration in the Makó Trough, which commenced a few years ago, has focused on the utilization of unconventional hydrocarbons. Accumulations are regarded as "unconventional" when they cannot be produced economically except by means of some sort of stimulation, usually hydraulic fracturing. The model we have developed for the evaluation of the hydrocarbon potential indicates a significant gas accumulation in the area of the Makó Trough. The tally of the distinctive attributes of the hydrocarbon system and the combined analysis of the available geological data led to the conclusion that the Makó Trough represents an area of active basin-centered gas accumulation (BCGA), with very significant perspective reserves. In a BCGA, hydrocarbons do not accumulate conventionally, in structural or stratigraphic traps, but rather in cells. Due to the geological setting of the Makó Trough, the hydrocarbon cell here forms a relatively continuous zone marked by considerable internal lithological and petrophysical variability. The most prolific parts, called sweet spots, possess a reservoir potential higher than the average. The identification of these sweet spots constitutes one of the most important, and quite possibly the most challenging task of the entire exploration project. The hemipelagic Endrőd Formation, which acts as the source rock, contains organic-rich marls in a depth delimited by the 170-230 °C isotherms. These marls constitute the still active hydrocarbon "kitchen" of the BCGA in the Makó Trough. The top and bottom boundaries of the cell essentially coincide with the turbidites of the Szolnok Formation and the top of the pre-Neogene basement, respectively. In light of the fact that pressure, temperature, and maturity tests have produced rather similar results in a number of wells in the area, we have reason to believe that the extension of the Makó Trough's BCGA is of regional dimensions (>1000 km2). The thickness and lateral extension of the potential reservoirs yield a cell volume as great as several hundred km3 - the largest single prospective gas occurrence in Hungary to date. Due to its novelty and complexity, the exploration of this unconventional resource demands the concurrent application of a wider range of geological and geophysical methods. In this presentation, we use selected examples to give an idea of where we stand on the way toward understanding the Makó Trough, particularly in terms of the geometric and structural features of the basin, the depositional (basin-fill) processes, and of the maturation history and accumulation properties of hydrocarbons. The geophysical surveys were purpose-designed to enable the mapping of the deep sedimentary trough and the sediments deposited in it. The data acquired to date suggest that the basin-centered gas accumulation occurred in the Lower Pannonian strata (11-6? Ma). Interpreting the 3D seismic data, the structural features and sedimentology of the basin can be studied in excellent resolution, while the integration of the seismic information with the geological data obtained from the wells allows us to interpret local well information extensively to gain a deeper, three-dimensional understanding of the basin. The sedimentary sequence filling up the Makó Trough displays distinct stratigraphic units separated by unconformities. Mapping the top of the pre-Neogene basement provides valuable insight into the nature of the paleo-geomorphological elements and the sedimentary environment at the onset of rifting. Paleontological information dates the syn-rift sediments of the trough to the Late Miocene (Early Pannonian), suggesting that the most intensive phase of basin evolution here was delayed by a few million years compared to adjacent areas. For the environmental reconstruction of the post-rift sedimentary sequence, we start with the assumption that initially a starved basin existed here, where sedimentation could not keep up with the rate of subsidence (Endrőd Formation). The basin was then almost completely filled by the turbidites of a prograding delta system (Szolnok Formation), followed by the sediments from the pro-delta (Algyő Formation) and the delta plain (Újfalu Formation). During the Plio- and Pleistocene, the area continued to subside at a decreased rate, providing a limited accumulation space filled by a thick sequence of alluvial deposits similar to the paleo-environment of the Tisza River and its tributaries prior to regulation. Our modeling of basin evolution in terms of subsidence, thermal and maturation history based on the results of geochemical, petrophysical, and paleontological investigations reveals that the organic matter accumulated in the trough underwent exceptionally rapid maturation during the last 5 to 7 million years. In fact, source rocks continue to mature at present time, and the hydrocarbons they generate continue to migrate and trap. The rather young age of the Pannonian Basin and its hydrocarbon system makes it quite different from the other examples of basin-centered gas accumulation, such as the classic Rocky Mountains in the U.S., or the Karoo Basin in South Africa, the Beetaloo Basin in Australia, making up the exploration portfolio of Falcon.
Pushing concentration of stationary solar concentrators to the limit.
Winston, Roland; Zhang, Weiya
2010-04-26
We give the theoretical limit of concentration allowed by nonimaging optics for stationary solar concentrators after reviewing sun- earth geometry in direction cosine space. We then discuss the design principles that we follow to approach the maximum concentration along with examples including a hollow CPC trough, a dielectric CPC trough, and a 3D dielectric stationary solar concentrator which concentrates sun light four times (4x), eight hours per day year around.
Pushing concentration of stationary solar concentrators to the limit.
Winston, Roland; Zhang, Weiya
2010-04-26
We give the theoretical limit of concentration allowed by nonimaging optics for stationary solar concentrators after reviewing sun-earth geometry in direction cosine space. We then discuss the design principles that we follow to approach the maximum concentration along with examples including a hollow CPC trough, a dielectric CPC trough, and a 3D dielectric stationary solar concentrator which concentrates sun light four times (4x), eight hours per day year around.
Exact analytic flux distributions for two-dimensional solar concentrators.
Fraidenraich, Naum; Henrique de Oliveira Pedrosa Filho, Manoel; Vilela, Olga C; Gordon, Jeffrey M
2013-07-01
A new approach for representing and evaluating the flux density distribution on the absorbers of two-dimensional imaging solar concentrators is presented. The formalism accommodates any realistic solar radiance and concentrator optical error distribution. The solutions obviate the need for raytracing, and are physically transparent. Examples illustrating the method's versatility are presented for parabolic trough mirrors with both planar and tubular absorbers, Fresnel reflectors with tubular absorbers, and V-trough mirrors with planar absorbers.
Interseismic Coupling-Based Earthquake and Tsunami Scenarios for the Nankai Trough
NASA Astrophysics Data System (ADS)
Baranes, H.; Woodruff, J. D.; Loveless, J. P.; Hyodo, M.
2018-04-01
Theoretical modeling and investigations of recent subduction zone earthquakes show that geodetic estimates of interseismic coupling and the spatial distribution of coseismic rupture are correlated. However, the utility of contemporary coupling in guiding construction of rupture scenarios has not been evaluated on the world's most hazardous faults. Here we demonstrate methods for scaling coupling to slip to create rupture models for southwestern Japan's Nankai Trough. Results show that coupling-based models produce distributions of ground surface deformation and tsunami inundation that are similar to historical and geologic records of the largest known Nankai earthquake in CE 1707 and to an independent, quasi-dynamic rupture model. Notably, these models and records all support focused subsidence around western Shikoku that makes the region particularly vulnerable to flooding. Results imply that contemporary coupling mirrors the slip distribution of a full-margin, 1707-type rupture, and Global Positioning System measurements of surface motion are connected with the trough's physical characteristics.
Gas Forming a V-Shape Aluminum Sheet into a Trough of Saddle-Contour
NASA Astrophysics Data System (ADS)
Lee, Shyong; Lan, Hsien-Chin; Lee, Jye; Wang, Jian-Yih; Huang, J. C.; Chu, Chun Lin
2012-11-01
A sheet metal trough of aluminum alloys is manufactured by gas-forming process at 500 °C. The product with slope walls is of ~1.2 m long and ~260 mm opening width, comprising two conical sinks at two ends. The depth of one sink apex is ~350 mm, which results in the depth/width ratio reaching 1.4. To form such a complex shape with high aspect ratio, a pre-form of V-shape groove is prepared prior to the gas-forming work. When this double concave trough is turned upside down, the convex contour resembles the back of a twin hump camel. The formability of this configuration depends on the gas pressurization rate profile, the working temperature, material's micro-structure, as well as pre-form design. The latter point is demonstrated by comparing two aluminum alloys, AA5182 and SP5083, with nearly same compositions but very different grain sizes.
Dorsey, R.J.; Fluette, A.; McDougall, K.; Housen, B.A.; Janecke, S.U.; Axen, G.J.; Shirvell, C.R.
2007-01-01
Late Miocene to early Pliocene deposit at Split Mountain Gorge, California, preserve a record of basinal response to changes in regional tectonics, paleogeography, and evolution of the Colorado River. The base of the Elephant Trees Formation, magnetostratigraphically dated as 8.1 ?? 0.4 Ma, provides the earliest well-dated record of extension in the southwestern Salton Trough. The oldest marine sediments are ca. 6.3 Ma. The nearly synchronous timing of marine incursion in the Salton Trough and northern Gulf of California region supports a model for localization of Pacific-North America plate motion in the Gulf ca. 6 Ma. The first appearance of Colorado River sand at the Miocene-Pliocene boundary (5.33 Ma) suggests rapid propagation of the river to the Salton Trough, and supports a lake-spillover hypothesis for initiation of the lower Colorado River. ?? 2007 Geological Society of America.
The Valencia trough and the origin of the western Mediterranean basins
NASA Astrophysics Data System (ADS)
Vegas, R.
1992-03-01
Evolutionary models for the Valencia trough must be necessarily related to the Neogene-Present geodynamics of the western Mediterranean basins. All these basins occupy new space created in the wake of the westward translation of the Alboran block and the counter-clockwise rotation of the Corso-Sardinian block. This escape-tectonics, microplate dispersal, model can account for the co-existence and progressive migration of compressional and extensional strain fields within the Africa-Europe broad zone of convergence. In this escape-tectonics model, the Valencia trough has resulted in a complex evolution which includes: (1) latest Oligocene-Early Miocene rifting along the Catalan-Valencian margin due to the opening of the Gulf of Lions; (2) almost simultaneous, Early Miocene, transpressive thrusting in the Balearic margin related to the initiation of displacement of the Alboran block; and (3) Late Miocene generalized extension as a consequence of the opening of the South Balearic basin.
Slide Conveying of Granular Materials-Thinking Out of the Glovebox
NASA Technical Reports Server (NTRS)
Goddard, J. D.; Didwania, A. K.; Nott, P. R.
2000-01-01
The vibratory conveyor, routinely employed for normal-gravity transport of granular materials, usually consists of a continuous open trough vibrated sinusoidally to induce axial movement of a granular material. Motivated in part by a hypothetical application in zero gravity, we propose a novel modification of the vibratory conveyor based on a closed 2d trough operating in a "slide-conveying" mode, with the granular mass remaining permanently in contact with the trough walls. We present a detailed analysis of the mechanics of transport, based on a rigid-slab model for the granular mass with frictional (Coulomb) slip at the upper and lower walls. The form of the vibration cycle plays a crucial role, and the optimal conveying cycle is not the commonly assumed rectilinear sinusoidal motion. The conveying efficiency for the novel slide conveyor will be presented for several simple vibration cycles, including one believed to represent the theoretical optimum.
NASA Technical Reports Server (NTRS)
Adrian, M. L.; Gallagher, D. L.; Khazanov, G. V.; Chsang, S. W.; Liemohn, M. W.; Perez, J. D.; Green, J. L.; Sandel, B. R.; Mitchell, D. G.; Mende, S. B.;
2002-01-01
During a geomagnetic storm on 24 May 2000, the IMAGE Extreme Ultraviolet (EUV) camera observed a plasmaspheric density trough in the evening sector at L-values inside the plasmapause. Forward modeling of this feature has indicated that plasmaspheric densities beyond the outer wall of the trough are well below model expectations. This diminished plasma condition suggests the presence of an erosion process due to the interaction of the plasmasphere with ring current plasmas. We present an overview of EUV, energetic neutral atom (ENA), and Far Ultraviolet (FUV) camera observations associated with the plasmaspheric density trough of 24 May 2000, as well as forward modeling evidence of the lie existence of a plasmaspheric erosion process during this period. FUV proton aurora image analysis, convolution of ENA observations, and ring current modeling are then presented in an effort to associate the observed erosion with coupling between the plasmasphere and ring-current plasmas.
Coincident observations of ionospheric troughs and the equatorial plasmapause
NASA Technical Reports Server (NTRS)
Grebowsky, J. M.; Maynard, N. C.; Tulunay, Y. K.; Lanzerotti, L. J.
1976-01-01
Electron-density observations made in the topside ionosphere by the Ariel 4 and Isis 2 satellites are examined in conjunction with results obtained by Explorer 45 when it traversed the near-equatorial plasmapause with one hour (both UT and MLT) of the Ariel and Isis traversals of the same L coordinate. Both dusk and night observations are analyzed, and an attempt is made to show that depressions in ionospheric electron density occur in the vicinity of the plasmapause field line. It is concluded that the electron distributions observed in the electron-density troughs at 550 km near dusk by Ariel and at 1400 km near midnight by Isis do not always parallel variations in the light-ion distribution inferred from the Explorer plasmapause traversals and that there appears to be no specific feature of the main ionospheric trough which can be used to identify the plasmapause field line except in a statistical sense.
Airborne Lidar measurements of the atmospheric pressure profile with tunable Alexandrite lasers
NASA Technical Reports Server (NTRS)
Korb, C. L.; Schwemmer, G. K.; Dombrowski, M.; Milrod, J.; Walden, H.
1986-01-01
The first remote measurements of the atmospheric pressure profile made from an airborne platform are described. The measurements utilize a differential absorption lidar and tunable solid state Alexandrite lasers. The pressure measurement technique uses a high resolution oxygen A band where the absorption is highly pressure sensitive due to collision broadening. Absorption troughs and regions of minimum absorption were used between pairs of stongly absorption lines for these measurements. The trough technique allows the measurement to be greatly desensitized to the effects of laser frequency instabilities. The lidar system was set up to measure pressure with the on-line laser tuned to the absorption trough at 13147.3/cm and with the reference laser tuned to a nonabsorbing frequency near 13170.0/cm. The lidar signal returns were sampled with a 200 range gate (30 vertical resoltion) and averaged over 100 shots.
NASA Astrophysics Data System (ADS)
Seton, M.; Williams, S.; Mortimer, N. N.; Meffre, S.; Moore, J.; Micklethwaite, S.; Zahirovic, S.
2013-12-01
The eastern Coral Sea region is an underexplored area at the northeastern corner of the Australian plate, where long-lived interaction between the Pacific and Australian plate boundaries has resulted in an intricate assemblage of deep oceanic basins and ridges, continental fragments and volcanic products. A paucity of marine geophysical and geological data from this complex region has resulted in the lack of a clear conceptual framework to describe its formation, ultimately affecting our understanding of the connection between the plate boundaries of the SW Pacific and SE Asia. In particular, the tectonic relationship between two back-arc basins, the Santa Cruz and d'Entrecasteaux Basins, and the South Rennell Trough, has yet to be resolved. In October-November, 2012, we collected 6,200 km of marine magnetic, 6,800 km of gravity and over 13,600 km2 of swath bathymetry data from the eastern Coral Sea onboard the RV Southern Surveyor. A complementary dredging program yielded useful samples from 14 seafloor sites. Our preliminary geochemical interpretation of the dredge samples obtained from the South Rennell Trough reveal volcanic rocks resembling MORB or BABB-type basalts, similar in composition to the recently re-analysed and dated ORSTOM dredges from the area that yielded ~28 Ma MORB-like basalts. Swath bathymetry profiles from the Santa Cruz Basin reveal that the South Rennell Trough extends into this basin, with seafloor spreading fabric being parallel to the trough. Preliminary analysis of the three full and four partial new magnetic anomaly profiles across the Santa Cruz Basin, coupled with limited existing profiles, reveals that the basin may have formed between Chrons 13-18 (~32-38 Ma), with an extinct spreading ridge along the inferred continuation of the South Rennell Trough, consistent with ORSTOM age dates. Our results suggest that the South Rennell Trough is an extinct southwestward propagating spreading ridge, which may have initiated along a pre-existing zone of weakness. A preliminary interpretation of the 4 magnetic profiles collected in the d'Entrecasteaux Basin and existing profiles of seafloor fabric shows that this basin does not share a common seafloor spreading history with the Santa Cruz Basin, as has been suggested previously. Our preliminary interpretation of the relationship between the Santa Cruz Basin, South Rennell Trough and d'Entrecasteaux Basin requires a re-interpretation of existing models of the SW Pacific to take into account a southwestward propagating spreading ridge between 38-32 Ma, contemporaneous with seafloor spreading further south in the North Loyalty Basin. Further work on age-dating and geochemical analysis of the newly collected dredge samples and an in-depth analysis of the magnetic anomalies in the d'Entrecasteaux Basin may further yield important information concerning the tectonic evolution of the area.
Performance of European chemistry transport models as function of horizontal resolution
NASA Astrophysics Data System (ADS)
Schaap, M.; Cuvelier, C.; Hendriks, C.; Bessagnet, B.; Baldasano, J. M.; Colette, A.; Thunis, P.; Karam, D.; Fagerli, H.; Graff, A.; Kranenburg, R.; Nyiri, A.; Pay, M. T.; Rouïl, L.; Schulz, M.; Simpson, D.; Stern, R.; Terrenoire, E.; Wind, P.
2015-07-01
Air pollution causes adverse effects on human health as well as ecosystems and crop yield and also has an impact on climate change trough short-lived climate forcers. To design mitigation strategies for air pollution, 3D Chemistry Transport Models (CTMs) have been developed to support the decision process. Increases in model resolution may provide more accurate and detailed information, but will cubically increase computational costs and pose additional challenges concerning high resolution input data. The motivation for the present study was therefore to explore the impact of using finer horizontal grid resolution for policy support applications of the European Monitoring and Evaluation Programme (EMEP) model within the Long Range Transboundary Air Pollution (LRTAP) convention. The goal was to determine the "optimum resolution" at which additional computational efforts do not provide increased model performance using presently available input data. Five regional CTMs performed four runs for 2009 over Europe at different horizontal resolutions. The models' responses to an increase in resolution are broadly consistent for all models. The largest response was found for NO2 followed by PM10 and O3. Model resolution does not impact model performance for rural background conditions. However, increasing model resolution improves the model performance at stations in and near large conglomerations. The statistical evaluation showed that the increased resolution better reproduces the spatial gradients in pollution regimes, but does not help to improve significantly the model performance for reproducing observed temporal variability. This study clearly shows that increasing model resolution is advantageous, and that leaving a resolution of 50 km in favour of a resolution between 10 and 20 km is practical and worthwhile. As about 70% of the model response to grid resolution is determined by the difference in the spatial emission distribution, improved emission allocation procedures at high spatial and temporal resolution are a crucial factor for further model resolution improvements.
Two-Dimensional Automatic Measurement for Nozzle Flow Distribution Using Improved Ultrasonic Sensor
Zhai, Changyuan; Zhao, Chunjiang; Wang, Xiu; Wang, Ning; Zou, Wei; Li, Wei
2015-01-01
Spray deposition and distribution are affected by many factors, one of which is nozzle flow distribution. A two-dimensional automatic measurement system, which consisted of a conveying unit, a system control unit, an ultrasonic sensor, and a deposition collecting dish, was designed and developed. The system could precisely move an ultrasonic sensor above a pesticide deposition collecting dish to measure the nozzle flow distribution. A sensor sleeve with a PVC tube was designed for the ultrasonic sensor to limit its beam angle in order to measure the liquid level in the small troughs. System performance tests were conducted to verify the designed functions and measurement accuracy. A commercial spray nozzle was also used to measure its flow distribution. The test results showed that the relative error on volume measurement was less than 7.27% when the liquid volume was 2 mL in trough, while the error was less than 4.52% when the liquid volume was 4 mL or more. The developed system was also used to evaluate the flow distribution of a commercial nozzle. It was able to provide the shape and the spraying width of the flow distribution accurately. PMID:26501288
Neutropenia is independently associated with sub-therapeutic serum concentration of vancomycin.
Choi, Min Hyuk; Choe, Yeon Hwa; Lee, Sang-Guk; Jeong, Seok Hoon; Kim, Jeong-Ho
2017-02-01
We aimed to identify the impact of the presence of neutropenia on serum vancomycin concentration (SVC). A retrospective study was conducted from January 2005 to December 2015. The study population was comprised of adult patients who were performed serum concentration of vancomycin. Patients with renal failure or using non-conventional dosages of vancomycin were excluded. A total of 1307 adult patients were included in this study, of whom 163 (12.4%) were neutropenic. Patients with neutropenia presented significantly lower SVCs than non-neutropenic patients (P<0.0001). Multiple linear regressions showed significant association between neutropenia and trough SVC (beta coefficients, -2.351; P=0.004). Multiple logistic regression analysis also revealed a significant association between sub-therapeutic vancomycin concentrations (trough SVC values<10mg/l) and neutropenia (odds ratio, 1.75, P=0.029) CONCLUSIONS: The presence of neutropenia is significantly associated with low SVC, even after adjusting for other variables. Therefore, neutropenic patients had a higher risk of sub-therapeutic SVC compared with non-neutropenic patients. We recommended that vancomycin therapy should be monitored with TDM-guided optimization of dosage and intervals, especially in neutropenic patients. Copyright © 2016 Elsevier B.V. All rights reserved.
Deep drivers of mesoscale circulation in the central Rockall Trough
NASA Astrophysics Data System (ADS)
Sherwin, T. J.; Alyenik, D.; Dumont, E.; Inall, M.
2014-11-01
Mesoscale variability in the central Rockall Trough between about 56 and 58° N has been investigated using a combination of ship-borne, underwater glider and gridded satellite altimeter measurements. Altimeter observations show that mesoscale features such as eddies and large scale circulation cells are ubiquitous phenomena. They have horizontal length scales of order 100 km with vertical scales of over 1000 m and are associated with mean current speeds (over the upper 1000 m) of 15 ± 7 cm s-1. Monthly area averaged surface Eddy Kinetic Energy (EKE) has substantial inter-annual variability, which at times can dominate a mean seasonal signal that varies from a maximum in May (74 cm2 s-2) to a minimum in October (52 cm2 s-2) and has increased gradually since 1992 at about 1.1 cm2 s-2 per year. A five month glider mission in the Trough showed that much of this energy comes from features that are located over 1000 m below the surface in the deep cold waters of the Trough (possibly from eddies associated the North Atlantic Current). The surface currents from altimeters had similar magnitude to the drift currents averaged over 1000 m from the glider in the stratified autumn, but were half the deep water speed during late winter. Although the mesoscale features move in an apparent random manner they may also be quasi-trapped by submarine topography such as seamounts. Occasionally anti-cyclonic and cyclonic cells combine to cause a coherent westward deflection of the European slope current that warms the Rockall side of the Trough. Such deflections contribute to the inter-annual variability in the observed temperature and salinity that are monitored in the upper 800 m of the Trough. By combining glider and altimeter measurements it is shown that altimeter measurements fail to observe a 15 cm s-1 northward flowing slope current on the eastern side and a small persistent southward current on the western side. There is much to be gained from the synergy between satellite altimetry and in situ glider observations both in the interpretation of their separate data sets and in aiding glider pilots to steer their vehicles through EKE active regions such as the north-east Atlantic.
The role of water in the petrogenesis of Marina trough magmas
NASA Astrophysics Data System (ADS)
Stolper, Edward; Newman, Sally
1994-02-01
Most variations in composition among primitive basalts from the Mariana back-arc trough can be explained by melting mixtures of an N-type mid-ocean ridge basalt (NMORB) mantle source and an H2O rich component, provided the degree of melting is positively and approximately linearly correlated with the proportion of the H2O-rich component in the mixture. We conclude that the degrees of melting by which Mariana trough magmas are generated increase from magmas similar to NMORB, through more H2O-enriched basalts, to 'arc-like' basalts, and that this increase is due to the lowering of the solidus of mantle peridotite that accompanies addition of the H2O-rich component. The H2O-rich component is likely to be ultimately derived from fluid from a subducting slab, but we propose that by the time fluids reach the source regions of Mariana trough basalts, they have interacted with sufficient mantle material that for all but the most incompatible of elements (with respect to fluid-mantle interaction), they are in equilibrium with the mantle. In contrast, fluids added to the source regions of Mariana island-arc magmas have typically interacted with less mantle and thus retain the signature of slab-derived fluids to varying degrees for all but the most compatible elements. Primitive Mariana arc basalts can be generated by melting mixtures of such incompletely exchanged slab-derived fluids and sources similar to NMORB-type mantle sources, but the degrees of melting are typically higher than those of Mariana trough NMORB and the sources have been variably depleted relative to the back-arc sources by previous melt extraction. This depletion may be related to earlier extraction of back-arc basin magmas or may evolve by repeated fluxing of the sources as fluid is continually added to them in the regions of arc magma generation. If fluid with partitioning behavior relative to the solid mantle similar to that deduced for the H2O-rich component involved in the generation of Mariana trough basalts were extracted from primitive mantle, the residual mantle would have many of the minor and trace element characteristics of typical oceanic upper mantle; primitive mantle enriched in such fluid would be a satisfactory source for the continental crust in terms of its trace and minor element chemical composition.
NASA Astrophysics Data System (ADS)
Bentley, S. J.; Muhammad, Z.; Dickens, J.; Droxler, A.; Peterson, L.; Opdyke, B.
2004-12-01
Multicores and jumbo piston cores were collected from the Moresby Trough from the R/V Melville in March-April 204 to study patterns of off-shelf sediment flux from the Gulf of Papua to the deep sea over Pleistocene-Holocene timescales. The Moresby Trough represents the primary deep-sea sediment conduit linking the Source to Sink Gulf of Papua study area to the north with the Coral Sea Basin to the south. Core locations were navigated from the surface using dynamic positioning and multibeam bathymetric mosaics collected during the cruise. Selected cores have been analyzed using a multi-sensor core logger, X-radiography, granulometry, and Pb-210 geochronology. Most piston cores collected from the Moresby Trough contain abundant mafic sandy turbidites overlain by fine-grained hemipelagic deposits 1-2 m thick. X-radiographs of multicores reveal mostly bioturbated hemipelagics. However, one core, MV25-0403-24MC, was collected from the axis of a primary channel, and contains at least two fine-grained turbidites within the upper 0.5 m of sediment. The uppermost turbidite contains low but uniform activities of excess Pb-210, and may have been 15-20 cm thick at the time of deposition (i.e., before subsequent disruption by bioturbation), based on fabric and radiochemical evidence. Application of a simple box-model for physical mixing (i.e., during the flow) and subsequent decay suggests that the uppermost turbidite was deposited 70-120 years before present. Bioturbation has since reworked about 60% of the bed, suggesting that such beds will only escape destruction by bioturbation if they are > 10 cm thick, and are deposited more frequently than once per century. Based on these observations, we suggest that gravity flows are presently active in the Moresby trough, and may account for a significant fraction of the hemipelagic drape present in channel systems. However, fabric evidence for these thin, fine-grained beds may be obscured by subsequent bioturbation. Also, at some point in the past, possibly at the onset of the Holocene Transgression, the character of sediment flux to the Moresby Trough shifted from sandy mafic-rich sandy turbidity currents to much finer sediments, delivered downslope by both benthic flows and vertical flux through the water column.
NASA Astrophysics Data System (ADS)
Pérez-Aparicio, Elena; Lillo-Bravo, Isidoro; Moreno-Tejera, Sara; Silva-Pérez, Manuel
2017-06-01
Thermal energy for industrial processes can be generated using thermal (ST) or photovoltaic (PV) solar energy. ST energy has traditionally been the most favorable option due to its cost and efficiency. Current costs and efficiencies values make the PV solar energy become an alternative to ST energy as supplier of industrial process heat. The aim of this study is to provide a useful tool to decide in each case which option is economically and environmentally the most suitable alternative. The methodology used to compare ST and PV systems is based on the calculation of the levelized cost of energy (LCOE) and greenhouse gas emissions (GHG) avoided by using renewable technologies instead of conventional sources of energy. In both cases, these calculations depend on costs and efficiencies associated with ST or PV systems and the conversion factor from thermal or electrical energy to GHG. To make these calculations, a series of hypotheses are assumed related to consumer and energy prices, operation, maintenance and replacement costs, lifetime of the system or working temperature of the industrial process. This study applies the methodology at five different sites which have been selected taking into account their radiometric and meteorological characteristics. In the case of ST energy three technologies are taken into account, compound parabolic concentrator (CPC), linear Fresnel collector (LFC) and parabolic trough collector (PTC). The PV option includes two ways of use of generated electricity, an electrical resistance or a combination of an electrical resistance and a heat pump (HP). Current values of costs and efficiencies make ST system remains as the most favorable option. These parameters may vary significantly over time. The evolution of these parameters may convert PV systems into the most favorable option for particular applications.
Shielded serpentine traveling wave tube deflection structure
Hudson, C.L.; Spector, J.
1994-12-27
A shielded serpentine slow wave deflection structure is disclosed having a serpentine signal conductor within a channel groove. The channel groove is formed by a serpentine channel in a trough plate and a ground plane. The serpentine signal conductor is supported at its ends by coaxial feed through connectors. A beam interaction trough intersects the channel groove to form a plurality of beam interaction regions wherein an electron beam may be deflected relative to the serpentine signal conductor. 4 figures.
DETAIL VIEW OF CLASSIFIER, TAILINGS LAUNDER TROUGH, LINE SHAFTS, AND ...
DETAIL VIEW OF CLASSIFIER, TAILINGS LAUNDER TROUGH, LINE SHAFTS, AND CONCENTRATION TABLES, LOOKING SOUTHWEST. SLURRY EXITING THE BALL MILL WAS COLLECTED IN AN AMALGAMATION BOX (MISSING) FROM THE END OF THE MILL, AND INTRODUCED INTO THE CLASSIFIER. THE TAILINGS LAUDER IS ON THE GROUND AT LOWER RIGHT. THE LINE SHAFTING ABOVE PROVIDED POWER TO THE CONCENTRATION TABLES BELOW AT CENTER RIGHT. - Gold Hill Mill, Warm Spring Canyon Road, Death Valley Junction, Inyo County, CA
Fate and Transport of Tungsten at Camp Edwards Small Arms Ranges
2007-08-01
area into the lower berm and/or trough. A similar approach was used in the lower berm area with samples collected from soil sloughing from the...bucket au- ger to collect samples beneath the bullet pockets and the trough. A multi - increment, subsurface soil sample was made by combining the...range. From these soil profiles, a total of 72 multi -increment subsurface soil sam- ples was collected (Table 2). The auger was cleaned between holes
DETAIL VIEW OF BALL MILL FEED SYSTEM, MOUTH OF CLASSIFIER, ...
DETAIL VIEW OF BALL MILL FEED SYSTEM, MOUTH OF CLASSIFIER, AND ORE BIN CHUTE, LOOKING EAST NORTHEAST. CRUSHED ORE FROM THE SECONDARY ORE BIN WAS INTRODUCED INTO THE FEED TROUGH VIA A CHUTE. AS THE BALL MILL TURNED, THE ROUND SCOOP ALSO TURNED IN THE TROUGH TO CHANNEL ORE INTO THE BALL MILL. SEE CA-292-14 FOR IDENTICAL B&W NEGATIVE. - Gold Hill Mill, Warm Spring Canyon Road, Death Valley Junction, Inyo County, CA
DETAIL VIEW OF BALL MILL FEED SYSTEM, MOUTH OF CLASSIFIER, ...
DETAIL VIEW OF BALL MILL FEED SYSTEM, MOUTH OF CLASSIFIER, AND ORE BIN CHUTE, LOOKING EAST NORTHEAST. CRUSHED ORE FROM THE SECONDARY ORE BIN WAS INTRODUCED INTO THE FEED TROUGH VIA A CHUTE. AS THE BALL MILL TURNED, THE ROUND SCOOP ALSO TURNED IN THE TROUGH TO CHANNEL ORE INTO THE BALL MILL. SEE CA-292-20 (CT) FOR IDENTICAL COLOR TRANSPARENCY. - Gold Hill Mill, Warm Spring Canyon Road, Death Valley Junction, Inyo County, CA
Bottom-water observations in the Vema fracture zone
NASA Astrophysics Data System (ADS)
Eittreim, Stephen L.; Biscaye, Pierre E.; Jacobs, Stanley S.
1983-03-01
The Vema fracture zone trough, at 11°N between 41° and 45°E, is open to the west at the 5000-m level but is silled at the 4650-m level on the east where it intersects the axis of the Mid-Atlantic Ridge. The trough is filled with Antarctic Bottom Water (AABW) with a potential temperature of 1.32°C and salinity of 34.82 ppt. The bottom water is thermally well mixed in a nearly homogeneous layer about 700 m thick. The great thickness of this bottom layer, as compared with the bottom-water structure of the western Atlantic basin, may result from enhanced mixing induced by topographic constriction at the west end of the fracture zone trough. A benthic thermocline, with potential temperature gradients of about 1.2 mdeg m-1, is associated with an abrupt increase in turbidity with depth at about 1200 m above bottom. A transitional layer of more moderate temperature gradients, about 0.4 mdeg m-1, lies between the benthic thermocline above and the AABW below. The AABW layer whose depth-averaged suspended paniculate concentrations range from 8 to 19 μg L-1, is consistently higher in turbidity than the overlying waters. At the eastern end of the trough, 140 m below sill depth, very low northeastward current velocities, with maximums of 3 cm s-1, were recorded for an 11-day period.
NASA Astrophysics Data System (ADS)
Kalén, Ola; Assmann, Karen M.; Wåhlin, Anna K.; Ha, Ho Kyung; Kim, Tae Wan; Lee, Sang Hoon
2016-01-01
The glaciers that drain the West Antarctic Ice Sheet into the Amundsen Sea are accelerating and experiencing increased basal melt of the floating ice shelves. Warm and salty deep water has been observed to flow southward in deep troughs leading from the shelf break to the inner shelf area where the glaciers terminate. It has been suggested that the melting induced by this warm water is responsible for the acceleration of the glaciers. Here we investigate the structure of the currents and the associated heat flow on the shelf using in-situ observations from 2008 to 2014 in Dotson Trough, the main channel in the western part of the Amundsen Sea shelf, together with output from a numerical model. The model is generally able to reproduce the observed velocities and temperatures in the trough, albeit with a thicker warm bottom layer. In the absence of measurements of sea surface height we define the barotropic component of the flow as the vertical average of the velocity. It is shown that the flow is dominated by warm barotropic inflows on the eastern side and colder and fresher barotropic outflows on the western side. The transport of heat appears to be primarily induced by this clockwise barotropic circulation in the trough, contrary to earlier studies emphasizing a bottom-intensified baroclinic inflow as the main contributor.
Xie, Qiyuan; Tu, Ran; Wang, Nan; Ma, Xin; Jiang, Xi
2014-02-28
The objective of this work is to quantitatively investigate the dripping-burning and flowing fire of thermoplastics. A new experimental setup is developed with a heating vessel and a T-trough. Hot thermoplastic liquids are generated in the vessel by electric heating. N2 gas is continuously injected into the vessel to avoid a sudden ignition of fuel in it. The detailed flowing burning behaviors of pool fire in the T-trough are analyzed through the measurements of the mass, heat flux and temperatures etc. The experimental results suggest that a continuous dripping of melted thermoplastic liquids in a nearly constant mass rate can be successfully made in the new setup. It also shows that the mass dripping rate of melted PS liquid is smaller than PP and PE since its large viscosity. In addition, the flame spread velocities of hot liquids of PS in the T-trough are also smaller than that of PP and PE because of its large viscosity. The mass burning rate of the PP and PE pool fire in T-trough are smaller than PS. Finally, considering the heating, melting, dripping and flowing burning behaviors of these polymers, it is suggested that the fire hazard of PE and PP are obviously higher than PS for their faster flowing burning. Copyright © 2013 Elsevier B.V. All rights reserved.
NASA Astrophysics Data System (ADS)
Tiari, Saeed
A desirable feature of concentrated solar power (CSP) with integrated thermal energy storage (TES) unit is to provide electricity in a dispatchable manner during cloud transient and non-daylight hours. Latent heat thermal energy storage (LHTES) offers many advantages such as higher energy storage density, wider range of operating temperature and nearly isothermal heat transfer relative to sensible heat thermal energy storage (SHTES), which is the current standard for trough and tower CSP systems. Despite the advantages mentioned above, LHTES systems performance is often limited by low thermal conductivity of commonly used, low cost phase change materials (PCMs). Research and development of passive heat transfer devices, such as heat pipes (HPs) to enhance the heat transfer in the PCM has received considerable attention. Due to its high effective thermal conductivity, heat pipe can transport large amounts of heat with relatively small temperature difference. The objective of this research is to study the charging and discharging processes of heat pipe-assisted LHTES systems using computational fluid dynamics (CFD) and experimental testing to develop a method for more efficient energy storage system design. The results revealed that the heat pipe network configurations and the quantities of heat pipes integrated in a thermal energy storage system have a profound effect on the thermal response of the system. The optimal placement of heat pipes in the system can significantly enhance the thermal performance. It was also found that the inclusion of natural convection heat transfer in the CFD simulation of the system is necessary to have a realistic prediction of a latent heat thermal storage system performance. In addition, the effects of geometrical features and quantity of fins attached to the HPs have been studied.
Effect of topography on wind turbine power and load fluctuations
NASA Astrophysics Data System (ADS)
Santoni, Christian; Ciri, Umberto; Leonardi, Stefano
2015-11-01
Onshore wind turbines produce more than 17 GW in the US, which constitutes 4 . 4 % of all the energy produced. Sites selection is mostly determined by the atmospheric conditions and the topographical characteristics of the region. While the effect of the atmospheric boundary layer had been widely studied, less attention has been given to the effect of the topography on the wind turbine aerodynamics. To address how the topography affects the flow, Large Eddy Simulations of the flow over a wind turbine placed over wavy wall are performed. The wavelength of the wavy terrain, λ, is 1 . 7 D where D is the turbine rotor diameter. Two different values of the height of the wavy wall, a / D = 0 . 05 and a / D = 0 . 10 have been considered. In addition, two positions of the turbine with respect to the wavy wall had been studied, on the crest and trough of the wavy wall and compared with a wind turbine over a flat wall. For the turbine located at the crest, the pressure gradient due to the wavy wall caused a recirculation behind the wind tower 2 . 5 D larger than that of the smooth wall. When placed at the trough of the wavy terrain, the favorable pressure gradient increases the wake velocity near the wall and promotes entrainment into the turbine wake. Numerical simulations were performed on XSEDE TACC, Grant CTS070066. This work was supported by the NSF, grant IIA-1243482 (WINDINSPIRE).
NASA Astrophysics Data System (ADS)
Sorlien, C. C.; Luyendyk, B. P.; Wilson, D. S.; Decesari, R. C.; Bartek, L. R.; Diebold, J. B.
2006-12-01
The extent of the West Antarctic ice sheet during mid-Cenozoic time is controversial and important to climate models. High-resolution multichannel seismic reflection data were acquired using the RVIB Palmer along the edge of the Ross Ice Shelf across the Eastern Basin of Ross Sea, in an area where calving of the ice shelf has exposed seafloor that has not been accessible to marine geophysics in several decades. A sub-basin in the far southeast corner of Ross Sea contains a succession of sediment-filled troughs, each capped by an unconformity. These troughs range between 2 and 20 km across, are 100 to 150 m-deep, with the narrower ones bounded by flat-topped ridges interpreted as moraines. We interpret the troughs interval to slightly predate 25 Ma. Reflections just 100 m below the troughs interval can be directly correlated to near DSDP270 where they underlie strata dated at ~25 Ma. A deeper stack of prograding sequences associated with a flat- topped ridge are interpreted as pre-25 Ma, possibly early Oligocene, deltas formed adjacent to the grounding line of a glacier, and the flat-topped ridge to be a moraine. The shallowest of the stack of unconformities capping the broad troughs can be projected across a basement ridge on trend with Roosevelt Island to a regional angular unconformity ("Red"), present across 70 km to deep sedimentary Eastern Basin. This unconformity represents about 1 km of missing stratigraphic section, is smooth and level, and splits into several major sequence boundaries within deep Eastern Basin. The second shallowest of these boundaries is dated about 14 Ma at DSDP-270. We interpret this unconformity to be cut by regional thick, grounded ice at depths several hundred meters below sea level. Pre-25 Ma strata show evidence of narrow erosional troughs and reflective mounds or ridges on the west flank of the basement ridge, but such features are not present in southern deep Eastern Basin near the ice shelf edge. This is evidence that the troughs were carved by glaciers issuing from distant highlands of Marie Byrd Land and not from East Antarctica. Late Oligocene through mid Miocene and younger prograding and unconformities farther north in Eastern Basin indicate grounded ice there. One possible interpretation is that "Red" was cut by thick, grounded ice that affected all of the Eastern Ross Sea paleo-shelf, while the pre-25 Ma glaciers affected only the area proximal to Marie Byrd Land. Late Oligocene glaciation on the outer shelf above deep Eastern Basin may have been sourced from East Antarctica and/or Central High. Evidence for pre-25 Ma glaciation proximal to Marie Byrd Land, combined with evidence for Oligocene ice caps at widely-separated localities of West Antarctica, allow the interpretation that portions of the West Antarctic Ice Sheet developed during Oligocene time. The broad troughs and the stack of prograding sequences may be related to dynamic ice caps and sea level falls in mid Oligocene and earliest Oligocene time. The Middle Miocene Red unconformity may be related to development of polar (cold-base) ice sheets. Oligocene glaciation implies that Marie Byrd Land and eastern Ross Sea have subsided from higher elevation due to cooling after late Cretaceous crustal thinning.
NASA Astrophysics Data System (ADS)
Sato, Hiroshi; Ishiyama, Tatsuya; Kato, Naoko; Toda, Shigeru; Kawasaki, Shinji; Fujiwara, Akira; Tanaka, Yasuhisa; Abe, Susumu
2017-04-01
M7-class crustal earthquakes of overlying plate in subduction system have tendency to increase before megathrust earthquake events. Due to stress buildup by the upcoming Nankai Trough megathrust earthquake, SW Japan has being seismically active for last 20 years. In terms of the mitigation of earthquake and tsunami hazards, to construct seismogenic source fault models is first step for evaluating the strong ground motions and height of tsunamis. Since 2013, we performed intense seismic profiling in and around the southern part of the Sea of Japan. In 2016, a 180-km-long onshore -offshore seismic survey was carried out across the volcanic arc and back-arc basins (from Kurayoshi to the Yamato basin). Onshore section, CMP seismic reflection data were collected using four vibroseis trucks and fixed 1150 channel recorders. Offshore part we acquired the seismic reflection data using 1950 cu inch air-guns towing a 4-km-long streamer cable. We performed CMP reflection and refraction tomography analysis. Obtained seismic section portrays compressively deformed rifted continental crust and undeformed oceanic back-arc basin, reflecting the rheological features. These basic structures were formed during the opening of the Sea of Japan in early Miocene. The sub-horizontal Pliocene sediments unconformably cover the folded Miocene sediments. The opening and clock-wise rotation of SW Japan has been terminated at 15 Ma and contacted to the young Shikoku basin along the Nankai trough. Northward motion of Philippine Sea plate (PHS) and the high thermal regime in the Shikoku basin produced the strong resistance along the Nankai trough. The main shortening deformation observed in the seismic section has been formed this tectonic event. After the initiation of the subduction along the Nankai trough, the rate of shortening deformation was decreased and the folded strata were covered by sub-horizontal Pliocene sediments. The thrusting trending parallel to the arc has been continued from Pliocene to early Pleistocene along the limited fault system. The change in the direction of the motion of PHS at 1 Ma produced major change in stress regime from NS compression to EW compression in the back-arc. Following the change of stress regime, former reverse faults reactivated as strike-slip fault. Reuse of pre-existing faults are common, and crustal deformation concentrates relatively narrow zone in the back-arc failed rifts. Two-months after from our survey, Mw 6.2 Tottoriken-chubu earthquake occurred just beneath the onshore part of the seismic line. The source fault corresponds to the boundary of abrupt change in P-wave velocity, however there were no surface ruptures and distinctive geologic faults. The bottom of seismogenic layer corresponds to TWT 4.5 sec., which is almost the top horizon of reflective middle crust.
NASA Astrophysics Data System (ADS)
Klimenko, M. V.; Klimenko, V. V.; Bryukhanov, V. V.
2007-05-01
In the given work the numerical calculation results of ionospheric effects of four modeling substorms which have begun in 00, 06, 12 and 18 UT are presented. Calculations are executed on the basis of Global Self-consistent Model of the Thermosphere, Ionosphere and Protonosphere (GSM TIP), developed in WD IZMIRAN, added by the new block of calculation of electric fields in the ionosphere of the Earth for vernal equinox conditions in the minimum of solar activity. In calculations we considered superposition of magnetospheric convection electric field (at set potential differences through polar caps and field aligned currents of the second zone with taking into account of particle precipitation) and dynamo field generated by thermospheric winds without taking into account the tides. It is shown, that in the given statement of problem the substorms cause strong positive disturbances in F-region of ionosphere in night sector. Negative disturbances are much less and arise, mainly, at night in the middle and low latitudes. During substorms longitudinal extent of main ionospheric trough increases. The substorm beginning in 18 UT, causes negative disturbances in high latitudes except for a southern polar cap. Besides there is "stratification" of the main ionospheric trough. As a result in southern hemisphere the additional high-latitude trough which is absent in quiet conditions is formed. "Stratification" of the main ionospheric trough occurs in northern hemisphere at 6 hours after the beginning of the substorm. These "stratifications" are consequence non-stationary magnetospheric convection. Distinction between these events consists that "stratification" in a southern hemisphere occurs in active phase of substorm, and in northern hemisphere in recovery phase. During a substorm beginning in 00 UT, foF2 increases in all northern polar cap. Positive disturbances of foF2 in the equatorial anomaly region cause all presented substorms, except for a substorm beginning in 18 UT. This substorm causes small negative disturbances in the equatorial anomaly region in the Indian longitudinal sector.
NASA Astrophysics Data System (ADS)
Hole, J. A.; Stock, J. M.; Fuis, G. S.; Rymer, M. J.; Murphy, J. M.; Sickler, R. R.; Criley, C. J.; Goldman, M.; Catchings, R. D.; Ricketts, J. W.; Gonzalez-Fernandez, A.; Driscoll, N.; Kent, G.; Harding, A. J.; Klemperer, S. L.
2009-12-01
The Salton Seismic Imaging Project (SSIP) and coordinated projects will acquire seismic data in and across the Salton Trough in southern California and northern Mexico, including the Coachella, Imperial, and Mexicali Valleys. These projects address both rifting processes at the northern end of the Gulf of California extensional province and earthquake hazards at the southern end of the San Andreas Fault system. In the central Salton Trough, North American lithosphere appears to have been rifted completely apart. Based primarily on a 1979 seismic refraction project, the 20-22 km thick crust is apparently composed entirely of new crust added by magmatism from below and sedimentation from above. The new data will constrain the style of continental breakup, the role and mode of magmatism, the effects of rapid Colorado River sedimentation upon extension and magmatism, and the partitioning of oblique extension. The southernmost San Andreas Fault is considered at high risk of producing a large damaging earthquake, yet structures of the fault and adjacent basins are poorly constrained. To improve hazard models, SSIP will image the geometry of the San Andreas and Imperial Faults, structure of sedimentary basins in the Salton Trough, and three-dimensional seismic velocity of the crust and uppermost mantle. SSIP and collaborating projects have been funded by several different programs at NSF and the USGS. These projects include seven lines of land refraction and low-fold reflection data, airguns and OBS data in the Salton Sea, coordinated fieldwork for onshore-offshore and 3-D data, and a densely sampled line of broadband stations across the trough. Fieldwork is tentatively scheduled for 2010. Preliminary work in 2009 included calibration shots in the Imperial Valley that quantified strong ground motion and proved lack of harm to agricultural irrigation tile drains from explosive shots. Piggyback and complementary studies are encouraged.
Analysis of Earthquake Source Spectra in Salton Trough
NASA Astrophysics Data System (ADS)
Chen, X.; Shearer, P. M.
2009-12-01
Previous studies of the source spectra of small earthquakes in southern California show that average Brune-type stress drops vary among different regions, with particularly low stress drops observed in the Salton Trough (Shearer et al., 2006). The Salton Trough marks the southern end of the San Andreas Fault and is prone to earthquake swarms, some of which are driven by aseismic creep events (Lohman and McGuire, 2007). In order to learn the stress state and understand the physical mechanisms of swarms and slow slip events, we analyze the source spectra of earthquakes in this region. We obtain Southern California Seismic Network (SCSN) waveforms for earthquakes from 1977 to 2009 archived at the Southern California Earthquake Center (SCEC) data center, which includes over 17,000 events. After resampling the data to a uniform 100 Hz sample rate, we compute spectra for both signal and noise windows for each seismogram, and select traces with a P-wave signal-to-noise ratio greater than 5 between 5 Hz and 15 Hz. Using selected displacement spectra, we isolate the source spectra from station terms and path effects using an empirical Green’s function approach. From the corrected source spectra, we compute corner frequencies and estimate moments and stress drops. Finally we analyze spatial and temporal variations in stress drop in the Salton Trough and compare them with studies of swarms and creep events to assess the evolution of faulting and stress in the region. References: Lohman, R. B., and J. J. McGuire (2007), Earthquake swarms driven by aseismic creep in the Salton Trough, California, J. Geophys. Res., 112, B04405, doi:10.1029/2006JB004596 Shearer, P. M., G. A. Prieto, and E. Hauksson (2006), Comprehensive analysis of earthquake source spectra in southern California, J. Geophys. Res., 111, B06303, doi:10.1029/2005JB003979.
NASA Astrophysics Data System (ADS)
Fink, A. H.; Pohle, S.
2009-04-01
Tropical Extra-tropical Interactions (TEIs) are often observed in association with an upper-level subtropical trough that penetrates into the tropics and, therefore, interacts with the tropical circulation. As a visible sign, a mid- to upper-level cloud band at the eastern flank of the trough and its related Subtropical Jet, named Tropical Plume (TP), is identifiable in infrared satellite imagery. McGuirk et al. (1987) gave a definition of Tropical Plumes and described the cloud bands as a northern hemisphere winter time phenomena. Previous studies identified TPs throughout the year with being rare in the June-mid- September period. Results of convection dynamics influenced/caused by TEIs during a pre-monsoon season event between 19 and 30 May 2006 will be presented. This case is characterized by two different investigation regions affected by TEI: During the first half of the event high precipitation amounts south-east of the cloud band over Burkina Faso, Benin, Togo, and Ivory Coast are observed caused by thermal forcing and dynamical maintenance by trough related good upper-level outflow conditions due to ageostrophic acceleration towards the trough and low inertial stability, or even inertial instability. This presentation is focused on the second half of this TEI event, which is characterized by the development of a pronounced heat low (HL) south-east of the upper-level trough over tropical West Africa, followed by convection south-east of the low pressure centre. A modified form of the pressure tendency equation (PTE) used by Knippertz and Fink (2008) is a diagnostic tool to investigate, which processes cause pressure drop near the Mali-Burkina Faso border by using both, the operational ECMWF Analysis and the AMMA EU re-analysis. The latter contains additionally the diabatic heating tendencies. Therefore, all terms of the PTE were calculated and will be discussed.
Performance and durability testing of parabolic trough receivers
NASA Astrophysics Data System (ADS)
Lei, Dongqiang; Fu, Xuqiang; Zhao, Dongming; Yuan, Guofeng; Wang, Zhifeng; Guo, Minghuan
2017-06-01
The paper describes the key performance and durability testing facilities of the parabolic trough receiver developed by Institute of Electrical Engineering, Chinese Academy of Sciences. The indoor heat loss test can be applied at 4-7 different temperature levels within 200-550 on receivers. The optical efficiency test bench consists of 12 metal halide lamps as the solar simulator and a 5 m length half-elliptical cylinder reflector with flat end reflectors. 3 ultra-precision temperature sensors are used in receiver each end to get the temperature difference. The residual gas analysis test bench is applied to analyze and predict the vacuum lifetime of the receiver. It can test the variations of composition and partial pressure of residual gases with temperature and time in the receiver annulus space by a high sensitivity quadrupole mass spectrometer gas analyzer. A coating accelerated ageing test bench, which is also used to test the thermal cycle, has been developed. This test bench uses the absorber tube of the recevier as the resistance heater to heat up the whole receiver. The coating lifetime can be predicted by the Arrhenius parameters. For the cycling test, the compressed air is used to directly cool the inner surface of the absorber tube. The thermal cycling test is performed with temperature cycles from 150 °C to 450 °C for 160 cycles. The maximum thermal cycling frequency is 8 cycles per day. The mechanical fatigue test bench is used to test the bellows and the glass-to-metal seals durability at the same time. Both bellows are expanded and compressed to 6.5 mm in turn with 10,000 cycles. A new rotating test bench was also developed to test the thermal efficiency of the receiver.
Calibration method and apparatus for measuring the concentration of components in a fluid
Durham, M.D.; Sagan, F.J.; Burkhardt, M.R.
1993-12-21
A calibration method and apparatus for use in measuring the concentrations of components of a fluid is provided. The measurements are determined from the intensity of radiation over a selected range of radiation wavelengths using peak-to-trough calculations. The peak-to-trough calculations are simplified by compensating for radiation absorption by the apparatus. The invention also allows absorption characteristics of an interfering fluid component to be accurately determined and negated thereby facilitating analysis of the fluid. 7 figures.
Extreme waves under Hurricane Ivan.
Wang, David W; Mitchell, Douglas A; Teague, William J; Jarosz, Ewa; Hulbert, Mark S
2005-08-05
Hurricane Ivan, a category 4 storm, passed directly over six wave-tide gauges deployed by the Naval Research Laboratory on the outer continental shelf in the northeastern Gulf of Mexico. Waves were observed with significant wave heights reaching 17.9 meters and maximum crest-to-trough individual wave heights of 27.7 meters (91 feet). Analysis suggests that significant wave heights likely surpassed 21 meters (69 feet) and that maximum crest-to-trough individual wave heights exceeded 40 meters (132 feet) near the eyewall.
Energy 101: Concentrating Solar Power
None
2018-02-07
From towers to dishes to linear mirrors to troughs, concentrating solar power (CSP) technologies reflect and collect solar heat to generate electricity. A single CSP plant can generate enough power for about 90,000 homes. This video explains what CSP is, how it works, and how systems like parabolic troughs produce renewable power. For more information on the Office of Energy Efficiency and Renewable Energy's CSP research, see the Solar Energy Technology Program's Concentrating Solar Power Web page at http://www1.eere.energy.gov/solar/csp_program.html.
Calibration method and apparatus for measuring the concentration of components in a fluid
Durham, Michael D.; Sagan, Francis J.; Burkhardt, Mark R.
1993-01-01
A calibration method and apparatus for use in measuring the concentrations of components of a fluid is provided. The measurements are determined from the intensity of radiation over a selected range of radiation wavelengths using peak-to-trough calculations. The peak-to-trough calculations are simplified by compensating for radiation absorption by the apparatus. The invention also allows absorption characteristics of an interfering fluid component to be accurately determined and negated thereby facilitating analysis of the fluid.
NASA Astrophysics Data System (ADS)
Pagola, Iñigo; Funcia, Ibai; Sánchez, Marcelino; Gil, Javier; González-Vallejo, Victoria; Bedoya, Maxi; Orellana, Guillermo
2017-06-01
The work presented in this paper offers a robust, effective and economically competitive method for online detection and monitoring of the presence of molecular hydrogen in the heat transfer fluids of parabolic trough collector plants. The novel method is based on a specific fluorescent sensor according to the ES2425002 patent ("Method for the detection and quantification of hydrogen in a heat transfer fluid").
NASA Technical Reports Server (NTRS)
2004-01-01
1 February 2004 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows large windblown ripples (or, some might say, small dunes) in troughs between mesas of the Tempe Mensa region. The ripples are generally perpendicular to the trough walls, indicating that [missing text] the features blew through these canyons. The image is located near 33.5oN, 69.2oW. The picture covers an area 3 km (1.9 mi) wide; sunlight illuminates the scene from the lower left.
Morphodynamics of intertidal bars near a seawall on a macrotidal beach, Wissant Bay, northern France
NASA Astrophysics Data System (ADS)
Sedrati, M.; Anthony, E.
2009-04-01
Several studies on beaches with intertidal bar-trough (ridge-and-runnel) systems in settings with relatively large tidal ranges (> 3 m) have focused on cross-shore bar mobility; however a few recent studies have drawn attention to the potential role of longshore transport induced by a mix of wave-tide and wind-forced longshore currents in the morphodynamics of the bars and troughs. The aim of this paper is to briefly highlight the relationship between wind-forced currents on the shallow intertidal zone and rapid intertidal bar-trough morphological response on a macrotidal beach. Fieldwork was conduced on Wissant beach, Wissant Bay, northern France, from 7 to 23 March, 2006. During the experiment, the beach (oriented NE-SW) exhibited three intertidal bar-trough systems and the upper bar was directly attached to a seawall. Seven digital elevation models (DEMs) were generated from high-resolution topographic surveys. Hydrodynamic measurements were obtained from five currentmeters (2 S4 and 3 ADCP) deployed on the bars crests and on the upper beach trough. Wave characteristics were obtained from the measured time series by spectral analysis using Fast Fourier Transforms. Wind speed and direction on the beach were measured using a portable weather station. The mean wind speed and directions averaged every three hours highlight closely-spaced high-energy events during the experiment, with long phases of significant lateral wind stress (NE to ENE). The measured waves and currents showed rapid and strong response to both the changes in wind speed and direction. Longshore currents measured during the experiment on the upper intertidal bar-trough system showed a clear SW flow pattern in response to NE to ENE wind approach directions while the currents in the lower intertidal zone flowed northeastward during the flood, following the coastline, and southwestward during the ebb in response to the tidal current modulation. Strong longshore migration of the upper intertidal bar to the SW was observed during the course of this fieldwork. This longshore migration was attended by erosion of the upper beach in the northeast and accretion in the southwest. Bars in the lower intertidal zone were relatively stable. The SW migration process of the upper intertidal bar during the experiment occurred at rates that fluctuated with the intensity of the longshore current. The net beach volume over the experiment was quite stable, thus showing that morphological change, notably bar migration, simply reflected adjustments to hydrodynamic forcing without new sand inputs into the system. The findings of the present study suggest that cross-shore currents are subordinate to, and may even be mitigated by, wind-forced longshore flows on this beach. The importance of longshore transport on the upper beach is due to hydrodynamic forcing over the shallow depth, with the seawall playing a probable additional longshore canalization effect. Longshore transport should be considered as an essential element of the morphodynamics of bar-trough beaches subject to large tidal ranges and significant lateral wind stress.
NASA Astrophysics Data System (ADS)
Shu, Yunchao; Nielsen, Sune G.; Zeng, Zhigang; Shinjo, Ryuichi; Blusztajn, Jerzy; Wang, Xiaoyuan; Chen, Shuai
2017-11-01
Sediments are actively subducted in virtually every arc worldwide. However, quantifying their contributions to arc lavas and thereby establishing budgets of how sediments participate in slab-mantle interaction is challenging. In this contribution we use thallium (Tl) abundances and isotopic compositions of lavas from the Ryukyu arc (including south Kyushu) and its back-arc basin, Okinawa Trough, to investigate the influence of sediments from arc to back-arc. We also present extensive geochemical data for sediments and altered oceanic crust (AOC) outboard of the northern (DSDP Sites 296, 442B, 443 and 444) and central (DSDP Sites 294 and 295) part of the Ryukyu arc. The Tl isotopic compositions of sediments change systematically from lighter outboard of northern Ryukyu arc to heavier outboard of central Ryukyu arc. The feature reflects the dominance of terrigenous material and pelagic sedimentation outboard of the northern and central Ryukyu arc, respectively. Central and northern sections of Ryukyu arc and Okinawa Trough display larger range of Tl isotopic variation than southern section, which is consistent with more pelagic provenance for sediments outboard of central and northern Ryukyu arcs than that of expected sediments outboard of southern Ryukyu arc. Identical Tl, Sr, Nd and Pb isotope variations are found when comparing arc and back arc lavas, which indicates that sediments fluxes also account for the Tl isotopic variations in the Okinawa Trough lavas. Two-end-member mixing models of Tl with Pb, Sr and Nd isotopes require sediment inputs of< 1%, 0.1-1% and 0.3-2% by weight to the depleted mantle source to account for all these isotopic compositions of lavas from northern, central and southern portion of the Ryukyu arc and Okinawa Trough. Bulk mixing between mantle and sediment end members predict very similar sediment fluxes when using Tl, Sr, Nd and Pb isotopes, which indicates that fractionation of these elements must have happened after mixing between mantle and sediments. This conclusion is corroborated by model calculations of mixing between sediment melts with fractionated Sr/Nd ratios and mantle wedge, which show that no arc lava plot on such mixing lines. Thus bulk sediment mixing, rather than sediment melt, is required for the generation of the lavas from the Ryukyu arc and Okinawa Trough. The requirement of bulk sediment mixing occurring before trace element fractionation in the sub-arc mantle is consistent with models where mélange layers form at the top of the slab and are the principle source material for arc lavas. In addition, the fact that sediment components observed in the Ryukyu arc and Okinawa Trough lavas are similar, suggests that transport of mélange material to the source regions of the arc and back arc is equally efficient. This feature is most readily explained if mélange material is transported from the slab as diapirs.
Deverel, S.J.; Milliard, S.P.
1988-01-01
Samples of shallow groundwater that underlies much of the irrigated area in the western San Joaquin Valley, CA, were analyzed for various major ions and trace elements, including selenium. Concentrations of the major ions generally were similar for groundwater collected in the two primary geologic zones - the alluvial fan and basin trough. Selenium concentrations are significantly (α = 0.05) higher in the groundwater of the alluvial-fan zone than in that of the basin-trough zone. The concentrations of oxyanion trace elements were significantly correlated (α = 0.05) with groundwater salinity, but the correlations between selenium and salinity and between molybdenum and salinity were significantly different (α = 0.05) in the alluvial-fan geologic zone compared with those in the basin-trough geologic zone. The evidence suggests that the main factors affecting selenium concentrations in the shallow groundwater are the degree of groundwater salinity and the geologic source of the alluvial soil material.
Origin of giant Martian polygons
NASA Technical Reports Server (NTRS)
Mcgill, George E.; Hills, L. S.
1992-01-01
Extensive areas of the Martian northern plains in Utopia and Acidalia planitiae are characterized by 'polygonal terrane'. Polygonal terrane consists of material cut by complex troughs defining a pattern resembling mudcracks, columnar joints, or frost-wedge polygons on earth. However, the Martian polygons are orders of magnitude larger than these potential earth analogues, leading to severe mechanical difficulties for genetic models based on simple analogy arguments. Plate-bending and finite element models indicate that shrinkage of desiccating sediment or cooling volcanics accompanied by differential compaction over buried topography can account for the stresses responsible for polygon troughs as well as the large size of the polygons. Although trough widths and depths relate primarily to shrinkage, the large scale of the polygonl pattern relates to the spacing between topographic elevations on the surface buried beneath polygonal terrane material. Geological relationships favor a sedimentary origin for polygonal terrane material, but our model is not dependent on the specific genesis. Our analysis also suggests that the polygons must have formed at a geologically rapid rate.
NASA Technical Reports Server (NTRS)
Senior, C.; Sharber, J. R.; Winningham, J. D.; De La Beaujardiere, O.; Heelis, R. A.; Evans, D. S.; Sugiura, M.; Hoegy, W. R.
1987-01-01
Simultaneous data from the Chatanika radar and the DE 2 and NOAA 6 satellites are used to study the typical behavior of the winter evening-sector auroral plasma during moderate and steady magnetic activity. The equatorward edge of the auroral E layer, of the region 2 field-aligned currents, and of the region of intense convection are colocated. The auroral E layer extends several degrees south of the equatorward edge of the keV electron precipitation from the CPS. Although the main trough and ionization channel are embedded in a region of intense electric field where the plasma flows sunward at high speed, the flux tubes associated with these two features have different time histories. The midlatitude trough is located south of the region of electron precipitation, above a proton aurora. The ionization channel marks the poleward edge of the main trough and is colocated with the equatorward boundary of the electron precipitation from the central plasma sheet.
NASA Technical Reports Server (NTRS)
2006-01-01
6 April 2006 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows the edge (running diagonally from the lower left to the upper right) of a trough, which is part of a large pit crater complex in Noachis Terra. This type of trough forms through the collapse of surface materials into the subsurface, and often begins as a series of individual pit craters. Over time, continued collapse increases the diameter of individual pits until finally, adjacent pits merge to form a trough such as the one captured in this image. The deep shadowed area is caused in part by an overhang; layered rock beneath this overhang is less resistant to erosion, and thus has retreated tens of meters backward, beneath the overhang. A person could walk up inside this 'cave' formed by the overhanging layered material. Location near: 47.0oS, 355.7oW Image width: 3 km (1.9 mi) Illumination from: upper left Season: Southern SummerNASA Astrophysics Data System (ADS)
Lebedeva, N. K.; Kuz'mina, O. B.
2018-01-01
The detailed study of Boreholes 8, 10, and 2 in the Russkaya Polyana district (Omsk Trough) made it possible to reveal the complex structure of the Upper Cretaceous sediments formed in unstable conditions of the marginal part of the Western Siberian basin. The Pokur, Kuznetsovo, Ipatovo, Slavgorod, and Gan'kino formations were subjected to palynological analysis and substantiation of their Late Cretaceous age. Eight biostratigraphic units with dinocysts and five units with spores and pollen from the Albian to the Maastrichtian were identified. The joint application of biostratigraphic and magnetostratigraphic methods made it possible to reveal the stratigraphic breaks in the studied sedimentary stratum and to estimate their scope. The age of the Lower Lyulinvor Subformation was specified in the marginal part of the Omsk Trough. The ingression traces of the Western Siberian basin in the Albian were found for the first time in the considered region.
Permanently enhanced dynamic triggering probabilities as evidenced by two M ≥ 7.5 earthquakes
Gomberg, Joan S.
2013-01-01
The 2012 M7.7 Haida Gwaii earthquake radiated waves that likely dynamically triggered the 2013M7.5 Craig earthquake, setting two precedents. First, the triggered earthquake is the largest dynamically triggered shear failure event documented to date. Second, the events highlight a connection between geologic structure, sedimentary troughs that act as waveguides, and triggering probability. The Haida Gwaii earthquake excited extraordinarily large waves within and beyond the Queen Charlotte Trough, which propagated well into mainland Alaska and likely triggering the Craig earthquake along the way. Previously, focusing and associated dynamic triggering have been attributed to unpredictable source effects. This case suggests that elevated dynamic triggering probabilities may exist along the many structures where sedimentary troughs overlie major faults, such as subduction zones’ accretionary prisms and transform faults’ axial valleys. Although data are sparse, I find no evidence of accelerating seismic activity in the vicinity of the Craig rupture between it and the Haida Gwaii earthquake.
Friction stir welding process to repair voids in aluminum alloys
NASA Technical Reports Server (NTRS)
Rosen, Charles D. (Inventor); Litwinski, Edward (Inventor); Valdez, Juan M. (Inventor)
1999-01-01
The present invention provides an in-process method to repair voids in an aluminum alloy, particularly a friction stir weld in an aluminum alloy. For repairing a circular void or an in-process exit hole in a weld, the method includes the steps of fabricating filler material of the same composition or compatible with the parent material into a plug form to be fitted into the void, positioning the plug in the void, and friction stir welding over and through the plug. For repairing a longitudinal void (30), the method includes machining the void area to provide a trough (34) that subsumes the void, fabricating filler metal into a strip form (36) to be fitted into the trough, positioning the strip in the trough, and rewelding the void area by traversing a friction stir welding tool longitudinally through the strip. The method is also applicable for repairing welds made by a fusing welding process or voids in aluminum alloy workpieces themselves.
Back-Arc Opening in the Western End of the Okinawa Trough Revealed From GNSS/Acoustic Measurements
NASA Astrophysics Data System (ADS)
Chen, Horng-Yue; Ikuta, Ryoya; Lin, Cheng-Horng; Hsu, Ya-Ju; Kohmi, Takeru; Wang, Chau-Chang; Yu, Shui-Beih; Tu, Yoko; Tsujii, Toshiaki; Ando, Masataka
2018-01-01
We measured seafloor movement using a Global Navigation Satellite Systems (GNSS)/Acoustic technique at the south of the rifting valley in the western end of the Okinawa Trough back-arc basin, 60 km east of northeastern corner of Taiwan. The horizontal position of the seafloor benchmark, measured eight times between July 2012 and May 2016, showed a southeastward movement suggesting a back-arc opening of the Okinawa Trough. The average velocity of the seafloor benchmark shows a block motion together with Yonaguni Island. The westernmost part of the Ryukyu Arc rotates clockwise and is pulled apart from the Taiwan Island, which should cause the expansion of the Yilan Plain, Taiwan. Comparing the motion of the seafloor benchmark with adjacent seismicity, we suggest a gentle episodic opening of the rifting valley accompanying a moderate seismic activation, which differs from the case in the segment north off-Yonaguni Island where a rapid dyke intrusion occurs with a significant seismic activity.
Cefepime plasma concentrations and clinical toxicity: a retrospective cohort study.
Huwyler, T; Lenggenhager, L; Abbas, M; Ing Lorenzini, K; Hughes, S; Huttner, B; Karmime, A; Uçkay, I; von Dach, E; Lescuyer, P; Harbarth, S; Huttner, A
2017-07-01
Cefepime remains an important antibiotic for severe bacterial infections, yet some meta-analyses have shown elevated mortality among patients randomized to it. Therapeutic drug monitoring (TDM) of β-lactam antibiotics is increasing, but optimal plasma concentrations remain unknown. We examined clinical outcomes of patients undergoing cefepime TDM in an initial effort to define the drug's toxicity threshold. In this single-centre retrospective cohort study, we enrolled all adult hospitalized patients receiving cefepime and undergoing TDM from January 2013 through July 2016. The primary outcome was the incidence of clinical toxicity; a secondary outcome was clinical failure. Plasma samples were analysed via high-performance liquid chromatography with ultraviolet detection. A total of 161 cefepime concentrations were drawn from 93 patients. Roughly half (82/161, 51%) and one-third (49/161, 30%) were trough and steady-state levels from patients receiving intermittent and continuous infusions, respectively; median concentrations were 17.6 mg/L (IQR 9.7-35.2) and 29.2 mg/L (IQR 18.9-45.9). Ten patients (11%) experienced a neurologic event considered at least possibly related to cefepime; neurotoxicity was associated with poorer renal function (median creatinine clearance 54 (IQR 39-97) vs. 75 mL/min/1.73 2 (IQR 44-104)) and longer cefepime durations (mean 8.3 (SD±6.7) vs. 13.3 days (± 14.2), p = 0.071). Patients with trough levels >20 mg/L had a fivefold higher risk for neurologic events (OR 5.05, 95% CI 1.3-19.8). Neurotoxicity potentially related to cefepime occurred at plasma concentrations >35 mg/L. For those receiving intermittent infusions, trough concentrations >20 mg/L should be avoided until further information is available from prospective studies. Copyright © 2017 European Society of Clinical Microbiology and Infectious Diseases. Published by Elsevier Ltd. All rights reserved.
Seow, C H; Leung, Y; Vande Casteele, N; Ehteshami Afshar, E; Tanyingoh, D; Bindra, G; Stewart, M J; Beck, P L; Kaplan, G G; Ghosh, S; Panaccione, R
2017-05-01
Transplacental transfer of infliximab and adalimumab results in detectable drug levels in the cord blood and infant. To determine if pregnancy influenced the pharmacokinetics of anti-TNF agents in women with inflammatory bowel disease. Twenty-five women from the University of Calgary inflammatory bowel disease(IBD) pregnancy clinic on maintenance infliximab or adalimumab were recruited prospectively with serum bio-banking performed each trimester. Infliximab trough and adalimumab steady-state levels were the outcomes of interest and were analysed using the ANSER infliximab and adalimumab assays. Multivariate linear mixed-effects models were constructed to assess infliximab and adalimumab drug levels during pregnancy adjusting for the clinical covariates of albumin, BMI and CRP. Fifteen women (eight Crohn's disease, seven ulcerative colitis) received infliximab and 10 women with 11 pregnancies were treated with adalimumab. Median age was 29.6 years (IQR: 27.6-31.2 years). Median disease duration was 9.2 years (IQR: 3.16-15.0 years). Median trough infliximab concentrations were 8.50 μg/mL (IQR: 7.23-10.07 μg/mL), 10.31 μg/mL (IQR: 7.66-15.63 μg/mL) and 21.02 μg/mL (IQR: 16.01-26.70 μg/mL) at trimesters 1, 2 and 3 respectively. Significant changes in albumin and BMI (P < 0.05) but not CRP (P > 0.05) were documented throughout pregnancy. After adjusting for albumin, BMI and CRP, infliximab trough levels increased during pregnancy, by 4.2 μg/mL per trimester (P = 0.02), while adalimumab drug levels remained stable (P > 0.05). Infliximab levels rise during pregnancy, whereas adalimumab levels remain stable after accounting for changes in albumin, BMI and CRP. Therapeutic drug monitoring in the second trimester may be useful in guiding dosing in the third trimester. © 2017 John Wiley & Sons Ltd.
NASA Astrophysics Data System (ADS)
Uchida, T.; Waseda, A.; Namikawa, T.
2004-12-01
Gas hydrates are ice-like solids made of water molecules containing various gas molecules. The geological evaluations have suggested worldwide methane contents of gas hydrate beneath deep sea floors as well as permafrost-related zones to about twice the total reserves of conventional and unconventional hydrocarbon. Scientific and economic interests are increasing in gas hydrate as a new energy resource and a potential greenhouse gas. In 1998 and 2002 Mallik wells were drilled in the Canadian Arctic that clarified the characteristics of gas hydrate-dominant layers at depths from 890 to 1110 m beneath the permafrost zone. Continuous downhole well log data, anomalies of chloride contents in pore waters, core temperature depression as well as visible gas hydrates have confirmed the highly saturated pore-space hydrate as intergranular pore filling within sandy layers, whose saturations are higher than 70% in pore volume. Muddy sediments scarcely contain gas hydrate. The Nankai Trough runs along the Japanese Island, where forearc basins and accretionary prisms developed extensively and BSRs (bottom simulating reflectors) have been recognized widely. The METI Nankai Trough wells in 2000 also revealed the presence of pore-space hydrate filling intergranular pore of sandy layers. It is remarked that there are many similar features in appearance and characteristics between the Mallik and Nankai Trough areas with observations of well-interconnected and highly saturated pore-space hydrate. It is necessary for evaluating subsurface fluid flow behaviors to know both porosity and permeability of gas hydrate-bearing sandy sediments, and measurements of water permeability for them indicate that highly saturated sands may have permeability of a few millidarcies. Subsequent analyses in sedimentology and geochemistry performed on gas hydrate-bearing sands revealed important geologic and sedimentologic controls on the formation and concentration of gas hydrate. It is suggested that the distribution of a porous and coarser-grained sandy sediments is one of the most important factors to control the occurrence of gas hydrates, as well as physicochemical conditions.
Formation of Continental Fragments: The Tamayo Bank, Gulf of California
NASA Astrophysics Data System (ADS)
van Wijk, J.; Abera, R.; Axen, G. J.
2015-12-01
Potential field data are used to construct a two-dimensional crustal model along a profile through the Tamayo Trough and Bank in the Gulf of California. The model is constrained by seismic reflection and refraction data, and field observations. The potential field data do not fit a model where the crust of the Tamayo trough is continental, but they fit well with a model where the Tamayo trough crust is oceanic. This implies that the Tamayo Bank is entirely bounded by oceanic crust and is a microcontinent. The oceanic crust of the Tamayo trough that separates the Tamayo Bank from the mainland of Mexico is thin (~4 km), so oceanic spreading was probably magma-starved before it ceased. This led us to come up with a model that explains the formation of microcontinents that are smaller in size and are not found in the proximity of hotspots. At first, seafloor spreading commences following continental breakup. When the magma supply to the ridge slows down, the plate boundary strengthens. Hence, the ridge may be abandoned while tectonic extension begins elsewhere, or slow spreading may continue while a new ridge starts to develop. The old spreading ridge becomes extinct. An asymmetric ocean basin forms if the ridge jumps within oceanic lithosphere; a microcontinent forms if the ridge jumps into a continental margin. This model for formation of continental fragments is applicable to other regions as well, eliminating the need of mantle plume impingement to facilitate rifting of a young continental margin and microcontinent formation.
Comparative Tectonics of Europa and Ganymede
NASA Astrophysics Data System (ADS)
Pappalardo, R. T.; Collins, G. C.; Prockter, L. M.; Head, J. W.
2000-10-01
Europa and Ganymede are sibling satellites with tectonic similarities and differences. Ganymede's ancient dark terrain is crossed by furrows, probably related to ancient large impacts, and has been normal faulted to various degrees. Bright grooved is pervasively deformed at multiple scales and is locally highly strained, consistent with normal faulting of an ice-rich lithosphere above a ductile asthenosphere, along with minor horizontal shear. Little evidence has been identified for compressional structures. The relative roles of tectonism and icy cryovolcanism in creating bright grooved terrain is an outstanding issue. Some ridge and trough structures within Europa's bands show tectonic similarities to Ganymede's grooved terrain, specifically sawtooth structures resembling normal fault blocks. Small-scale troughs are consistent with widened tension fractures. Shearing has produced transtensional and transpressional structures in Europan bands. Large-scale folds are recognized on Europa, with synclinal small-scale ridges and scarps probably representing folds and/or thrust blocks. Europa's ubiquitous double ridges may have originated as warm ice upwelled along tidally heated fracture zones. The morphological variety of ridges and troughs on Europa imply that care must be taken in inferring their origin. The relative youth of Europa's surface means that the satellite has preserved near-pristine morphologies of many structures, though sputter erosion could have altered the morphology of older topography. Moderate-resolution imaging has revealed lesser apparent diversity in Ganymede's ridge and trough types. Galileo's 28th orbit has brought new 20 m/pixel imaging of Ganymede, allowing direct comparison to Europa's small-scale structures.
Scheer, Frank A J L; Morris, Christopher J; Shea, Steven A
2013-03-01
Despite the extended overnight fast, paradoxically, people are typically not ravenous in the morning and breakfast is typically the smallest meal of the day. We assessed whether this paradox could be explained by an endogenous circadian influence on appetite with a morning trough, while controlling for sleep/wake and fasting/feeding effects. Twelve healthy non-obese adults (six males; age, 20-42 years) were studied throughout a 13-day laboratory protocol that balanced all behaviors, including eucaloric meals and sleep periods, evenly across the endogenous circadian cycle. Participants rated their appetite and food preferences by visual analog scales. There was a large endogenous circadian rhythm in hunger, with the trough in the biological morning (8 AM) and peak in the biological evening (8 PM; peak-to-trough amplitude = 17%; P = 0.004). Similarly-phased significant endogenous circadian rhythms were present in appetites for sweet, salty and starchy foods, fruits, meats/poultry, food overall, and for estimates of how much food participants could eat (amplitudes 14-25%; all P < 0.05). In people who sleep at night, the intrinsic circadian evening peak in appetite may promote larger meals before the fasting period necessitated by sleep, whereas the circadian morning trough would theoretically facilitate the extended overnight fast. Furthermore, the circadian decline in hunger across the night would theoretically counteract the fasting-induced hunger increase that could otherwise disrupt sleep. Copyright © 2013 The Obesity Society.
NASA Astrophysics Data System (ADS)
Zhang, Xiao-Yong; Wang, Guang-Hua; Xu, Xin-Ya; Nong, Xu-Hua; Wang, Jie; Amin, Muhammad; Qi, Shu-Hua
2016-10-01
The present study investigated the fungal diversity in four different deep-sea sediments from Okinawa Trough using high-throughput Illumina sequencing of the nuclear ribosomal internal transcribed spacer-1 (ITS1). A total of 40,297 fungal ITS1 sequences clustered into 420 operational taxonomic units (OTUs) with 97% sequence similarity and 170 taxa were recovered from these sediments. Most ITS1 sequences (78%) belonged to the phylum Ascomycota, followed by Basidiomycota (17.3%), Zygomycota (1.5%) and Chytridiomycota (0.8%), and a small proportion (2.4%) belonged to unassigned fungal phyla. Compared with previous studies on fungal diversity of sediments from deep-sea environments by culture-dependent approach and clone library analysis, the present result suggested that Illumina sequencing had been dramatically accelerating the discovery of fungal community of deep-sea sediments. Furthermore, our results revealed that Sordariomycetes was the most diverse and abundant fungal class in this study, challenging the traditional view that the diversity of Sordariomycetes phylotypes was low in the deep-sea environments. In addition, more than 12 taxa accounted for 21.5% sequences were found to be rarely reported as deep-sea fungi, suggesting the deep-sea sediments from Okinawa Trough harbored a plethora of different fungal communities compared with other deep-sea environments. To our knowledge, this study is the first exploration of the fungal diversity in deep-sea sediments from Okinawa Trough using high-throughput Illumina sequencing.
NASA Astrophysics Data System (ADS)
Agel, Laurie; Barlow, Mathew; Colby, Frank; Binder, Hanin; Catto, Jennifer L.; Hoell, Andrew; Cohen, Judah
2018-05-01
Previous work has identified six large-scale meteorological patterns (LSMPs) of dynamic tropopause height associated with extreme precipitation over the Northeast US, with extreme precipitation defined as the top 1% of daily station precipitation. Here, we examine the three-dimensional structure of the tropopause LSMPs in terms of circulation and factors relevant to precipitation, including moisture, stability, and synoptic mechanisms associated with lifting. Within each pattern, the link between the different factors and extreme precipitation is further investigated by comparing the relative strength of the factors between days with and without the occurrence of extreme precipitation. The six tropopause LSMPs include two ridge patterns, two eastern US troughs, and two troughs centered over the Ohio Valley, with a strong seasonality associated with each pattern. Extreme precipitation in the ridge patterns is associated with both convective mechanisms (instability combined with moisture transport from the Great Lakes and Western Atlantic) and synoptic forcing related to Great Lakes storm tracks and embedded shortwaves. Extreme precipitation associated with eastern US troughs involves intense southerly moisture transport and strong quasi-geostrophic forcing of vertical velocity. Ohio Valley troughs are associated with warm fronts and intense warm conveyor belts that deliver large amounts of moisture ahead of storms, but little direct quasi-geostrophic forcing. Factors that show the largest difference between days with and without extreme precipitation include integrated moisture transport, low-level moisture convergence, warm conveyor belts, and quasi-geostrophic forcing, with the relative importance varying between patterns.
Christensen, A L; Lundbye-Christensen, S; Dethlefsen, C
2011-12-01
Several statistical methods of assessing seasonal variation are available. Brookhart and Rothman [3] proposed a second-order moment-based estimator based on the geometrical model derived by Edwards [1], and reported that this estimator is superior in estimating the peak-to-trough ratio of seasonal variation compared with Edwards' estimator with respect to bias and mean squared error. Alternatively, seasonal variation may be modelled using a Poisson regression model, which provides flexibility in modelling the pattern of seasonal variation and adjustments for covariates. Based on a Monte Carlo simulation study three estimators, one based on the geometrical model, and two based on log-linear Poisson regression models, were evaluated in regards to bias and standard deviation (SD). We evaluated the estimators on data simulated according to schemes varying in seasonal variation and presence of a secular trend. All methods and analyses in this paper are available in the R package Peak2Trough[13]. Applying a Poisson regression model resulted in lower absolute bias and SD for data simulated according to the corresponding model assumptions. Poisson regression models had lower bias and SD for data simulated to deviate from the corresponding model assumptions than the geometrical model. This simulation study encourages the use of Poisson regression models in estimating the peak-to-trough ratio of seasonal variation as opposed to the geometrical model. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.
Kvenvolden, K.A.; Rapp, J.B.; Hostettler, F.D.; Rosenbauer, R.J.
1994-01-01
Petroleum associated with sulfide-rich sediment is present in Escanaba Trough at the southern end of the Gorda Ridge spreading axis offshore from northern California within the Exclusive Economic Zone (EEZ) of the U.S. This location and occurrence are important for evaluation of the mineral and energy resource potential of the seafloor under U.S. jurisdiction. In Escanaba Trough, petroleum is believed to be formed by hydrothermal processes acting on mainly terrigenous organic material in Quaternary, river-derived sediment. To attempt to simulate these processes in the laboratory, portions of a Pleistocene gray-green mud, obtained from ??? 1.5 m below the seafloor at a water depth of ??? 3250 m in Escanaba Trough, were heated in the presence of water in four hydrous-pyrolysis experiments conducted at temperatures ranging from 250 to 350??C and at a pressure of 350 bar for 1.0-4.5 days. Distributions of n-alkanes, isoprenoid hydrocarbons, triterpanes, and steranes in the heated samples were compared with those in a sample of hydrothermal petroleum from the same area. Mud samples heated for less than 4.5 days at less than 350??C show changes in some, but not all, molecular marker ratios of organic compounds that are consistent with those expected during hydrothermal petroleum formation. Our results suggest that the organic matter in this type of sediment serves as one possible source for some of the compounds found in the hydrothermal petroleum. ?? 1994.
Geodynamic evolution of the lithosphere of the Sea of Okhotsk region from geophysical data
NASA Astrophysics Data System (ADS)
Verzhbitsky, E. V.; Kononov, M. V.
2006-06-01
The tectonic structure and anomalous distributions of geophysical fields of the Sea of Okhotsk region are considered; the lack of reliable data on the age of the lithosphere beneath basins of various origins in the Sea of Okhotsk is noted. Model calculations based on geological and geophysical data yielded an age of 65 Ma (the Cretaceous-Paleocene boundary) for the Central Okhotsk rise underlain by the continental lithosphere. This estimate agrees with the age (the end of the Cretaceous) derived from seismostratigraphic data. A comparative analysis of theoretical and measured heat fluxes in the Akademii Nauk Rise, underlain by a thinned continental crust, is performed. The analysis points to a higher (by 20%) value of the measured thermal background of the rise, which is consistent with a high negative gradient of gravity anomalies in this area. Calculations yielded an age of 36 Ma (the Early Oligocene) and a lithosphere thickness of 50 km for the South Okhotsk depression, whose seafloor was formed by processes of backarc spreading. The estimated age of the depression is supported by kinematic data on the region; the calculated thickness of the lithosphere coincides with the value estimated from data of magnetotelluric sounding here. This indicates that the formation time (36 Ma) of the South Okhotsk depression was estimated correctly. Numerical modeling performed for the determination of the basement age of rifting basins in the Sea of Okhotsk gave the following estimates: 18 Ma (the Early Miocene) for the Deryugin basin, 12 Ma (the Middle Miocene) for the TINRO basin, and 23 Ma (the Late Oligocene) for the West Kamchatka trough. These estimates agree with the formation time (Oligocene-Quaternary) of the sedimentary cover in rifting basins of the Sea of Okhotsk derived from geological and geophysical data. Model temperature estimates are obtained for lithologic and stratigraphic boundaries of the sedimentary cover in the Deryugin and TINRO basins and the West Kamchatka trough; the temperature analysis indicates that the latter two structures are promising for oil and hydrocarbon gas generation; the West Kamchatka trough possesses better reservoir properties compared to the TINRO and Deryugin basins. The latter is promising for the generation of hydrocarbon gas. Paleogeodynamic reconstructions of the Sea of Okhotsk region evolution are obtained for times of 90, 66, and 36 Ma on the basis of kinematic, geomagnetic, structural, tectonic, geothermal, and other geological and geophysical data.
Regional input to joint European space weather service
NASA Astrophysics Data System (ADS)
Stanislawska, I.; Belehaki, A.; Jansen, F.; Heynderickx, D.; Lilensten, J.; Candidi, M.
The basis for elaborating within COST 724 Action Developing the scientific basis for monitoring modeling and predicting Space Weather European space weather service is rich by many national and international activities which provide instruments and tools for global as well as regional monitoring and modeling COST 724 stimulates coordinates and supports Europe s goals of development and global cooperation by providing standards for timely and high quality information and knowledge in space weather Existing local capabilities are taken into account to develop synergies and avoid duplication The enhancement of environment monitoring networks and associated instruments technology yields mutual advantages for European service and regional services specialized for local users needs It structurally increases the integration of limited-area services generates a platform employing the same approach to each task differing mostly in input and output data In doing so it also provides complementary description of the environmental state within issued information A general scheme of regional services concept within COST 724 activity can be the processing chain from measurements trough algorithms to operational knowledge It provides the platform for interaction among the local end users who define what kind of information they need system providers who elaborate tools necessary to obtain required information and local service providers who do the actual processing of data and tailor it to specific user s needs Such initiative creates a unique possibility for small
Potential for solar industrial process heat in the United States: A look at California
NASA Astrophysics Data System (ADS)
Kurup, Parthiv; Turchi, Craig
2016-05-01
The use of Concentrating Solar Power (CSP) collectors (e.g., parabolic trough or linear Fresnel systems) for industrial thermal applications has been increasing in global interest in the last few years. In particular, the European Union has been tracking the deployment of Solar Industrial Process Heat (SIPH) plants. Although relatively few plants have been deployed in the United States (U.S.), we establish that 29% of primary energy consumption in the U.S. manufacturing sector is used for process heating. Perhaps the best opportunities for SIPH reside in the state of California due to its excellent solar resource, strong industrial base, and solar-friendly policies. This initial analysis identified 48 TWhth/year of process heat demand in certain California industries versus a technical solar-thermal energy potential of 23,000 TWhth/year. The top five users of industrial steam in the state are highlighted and special attention paid to the food sector that has been an early adopter of SIPH in other countries. A comparison of the cost of heat from solar-thermal collectors versus the cost of industrial natural gas in California indicates that SIPH may be cost effective even under the relatively low gas prices seen in 2014. A recommended next step is the identification of pilot project candidates to promote the deployment of SIPH facilities.
Potential for Solar Industrial Process Heat in the United States: A Look at California
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kurup, Parthiv; Turchi, Craig
The use of Concentrating Solar Power (CSP) collectors (e.g., parabolic trough or linear Fresnel systems) for industrial thermal applications has been increasing in global interest in the last few years. In particular, the European Union has been tracking the deployment of Solar Industrial Process Heat (SIPH) plants. Although relatively few plants have been deployed in the United States (U.S.), we establish that 29% of primary energy consumption in the U.S. manufacturing sector is used for process heating. Perhaps the best opportunities for SIPH reside in the state of California due to its excellent solar resource, strong industrial base, and solar-friendlymore » policies. This initial analysis identified 48 TWhth/year of process heat demand in certain California industries versus a technical solar-thermal energy potential of 23,000 TWhth/year. The top five users of industrial steam in the state are highlighted and special attention paid to the food sector that has been an early adopter of SIPH in other countries. A comparison of the cost of heat from solar-thermal collectors versus the cost of industrial natural gas in California indicates that SIPH may be cost effective even under the relatively low gas prices seen in 2014. A recommended next step is the identification of pilot project candidates to promote the deployment of SIPH facilities.« less
NASA Technical Reports Server (NTRS)
Yingst, R. A.; Mest, S. C.; Berman, D. C.; Garry, W. B.; Williams, D. A.; Buczkowski, D.; Jaumann, R.; Pieters, C. M.; De Sanctis, M. C.; Frigeri, A.;
2014-01-01
We report on a preliminary global geologic map of Vesta, based on data from the Dawn spacecraft's High- Altitude Mapping Orbit (HAMO) and informed by Low-Altitude Mapping Orbit (LAMO) data. This map is part of an iterative mapping effort; the geologic map has been refined with each improvement in resolution. Vesta has a heavily-cratered surface, with large craters evident in numerous locations. The south pole is dominated by an impact structure identified before Dawn's arrival. Two large impact structures have been resolved: the younger, larger Rheasilvia structure, and the older, more degraded Veneneia structure. The surface is also characterized by a system of deep, globe-girdling equatorial troughs and ridges, as well as an older system of troughs and ridges to the north. Troughs and ridges are also evident cutting across, and spiraling arcuately from, the Rheasilvia central mound. However, no volcanic features have been unequivocally identified. Vesta can be divided very broadly into three terrains: heavily-cratered terrain; ridge-and-trough terrain (equatorial and northern); and terrain associated with the Rheasilvia crater. Localized features include bright and dark material and ejecta (some defined specifically by color); lobate deposits; and mass-wasting materials. No obvious volcanic features are evident. Stratigraphy of Vesta's geologic units suggests a history in which formation of a primary crust was followed by the formation of impact craters, including Veneneia and the associated Saturnalia Fossae unit. Formation of Rheasilvia followed, along with associated structural deformation that shaped the Divalia Fossae ridge-and-trough unit at the equator. Subsequent impacts and mass wasting events subdued impact craters, rims and portions of ridge-and-trough sets, and formed slumps and landslides, especially within crater floors and along crater rims and scarps. Subsequent to the formation of Rheasilvia, discontinuous low-albedo deposits formed or were emplaced; these lie stratigraphically above the equatorial ridges that likely were formed by Rheasilvia. The last features to be formed were craters with bright rays and other surface mantling deposits. Executed progressively throughout data acquisition, the iterative mapping process provided the team with geologic proto-units in a timely manner. However, interpretation of the resulting map was hampered by the necessity to provide the team with a standard nomenclature and symbology early in the process. With regard to mapping and interpreting units, the mapping process was hindered by the lack of calibrated mineralogic information. Topography and shadow played an important role in discriminating features and terrains, especially in the early stages of data acquisition.
NASA Astrophysics Data System (ADS)
Newton, Andrew; Huuse, Mads
2016-04-01
Compared to other glaciated margins such as offshore mid-Norway and Svalbard, the Greenland continental shelf has, until recently, been the subject of only a limited amount of academic and industry research. This has been mainly due to the difficulty and expense of obtaining data in such harsh and operationally complex settings. Climate amelioration and technological advance has, particularly in recent years, allowed both academics and industry to substantially increase data collection across the many glaciated continental shelves in the Northern Hemisphere. Baffin Bay has been one of the primary regions of interest for the hydrocarbon industry which has sought to operate in the frontier basins offshore Greenland. As a result of these industry operations, a large database of geophysical and geological data has been collected. Some of this data has been made available to glacial scientists and provides a unique opportunity to investigate the seafloor geomorphology for regions where the majority of previous work has been hypothetical rather than grounded in geological evidence. In the work presented here we present a landform record offshore NW Greenland in the Melville Bay cross-shelf trough. This is one of the largest troughs on the entire Greenland shelf and measures up to 140 km in width. Shallow-marine cores collected in the coastal part of the trough show bedrock of Miocene age and indicate that a significant cover has likely been removed from the shelf by ice streams operating through the Late Cenozoic. This material has then been deposited at the shelf edge as a trough mouth fan. Using multibeam and seismic reflection data a large number of glacial landforms are observed and mapped in the trough. These include mega-scale glacial lineations, grounding-zone wedges, iceberg scours, and iceberg grounding pits. These landforms are used to reconstruct the ice dynamics of the Melville Bugt Ice Stream at the last glacial maximum and during its deglaciation. The observed grounding-zone wedges suggest that initial retreat was punctuated with two still-stands of long enough duration to accumulate material at the grounding zone. As the ice sheet decayed further, a rapid retreat of over 30 km occurred before the grounding line margin was stabilised again. Understanding the nonlinear rate of grounding-line retreat such as that presented here is crucial for the future modelling of not just the evolution of the Greenland Ice Sheet but also those elsewhere.
NASA Astrophysics Data System (ADS)
Shettima, B.; Abubakar, M. B.; Kuku, A.; Haruna, A. I.
2018-01-01
Facies analysis of the Cretaceous Bima Formation in the Gongola Sub -basin of the Northern Benue Trough northeastern Nigeria indicated that the Lower Bima Member is composed of alluvial fan and braided river facies associations. The alluvial fan depositional environment dominantly consists of debris flow facies that commonly occur as matrix supported conglomerate. This facies is locally associated with grain supported conglomerate and mudstone facies, representing sieve channel and mud flow deposits respectively, and these deposits may account for the proximal alluvial fan region of the Lower Bima Member. The distal fan facies were represented by gravel-bed braided river system of probably Scot - type model. This grade into sandy braided river systems with well developed floodplains facies, forming probably at the lowermost portion of the alluvial fan depositional gradient, where it inter-fingers with basinal facies. In the Middle Bima Member, the facies architecture is dominantly suggestive of deep perennial sand-bed braided river system with thickly developed amalgamated trough crossbedded sandstone facies fining to mudstone. Couplets of shallow channels are also locally common, attesting to the varying topography of the basin. The Upper Bima Member is characterized by shallow perennial sand-bed braided river system composed of successive succession of planar and trough crossbedded sandstone facies associations, and shallower channels of the flashy ephemeral sheetflood sand - bed river systems defined by interbedded succession of small scale trough crossbedded sandstone facies and parallel laminated sandstone facies. The overall stacking pattern of the facies succession of the Bima Formation in the Gongola Sub - basin is generally thinning and fining upwards cycles, indicating scarp retreat and deposition in a relatively passive margin setting. Dominance of kaolinite in the clay mineral fraction of the Bima Formation points to predominance of humid sub - tropical to tropical climatic conditions. This favors pedogenic activities which are manifested in the several occurrences of paleosols. Pronounced periods of arid climatic conditions are also notable from the subordinate smectite mineralization. Chlorite mineralization at some localities is indicative of elevation of the provenance area, and this is synonymous with deposition of the Bima Formation, because of its syn - depositional tectonics. The absences of lacustrine shales in the syn - rift stratigraphic architecture of the Bima Formation indicates that the lower Cretaceous petroleum system that are common in the West and Central African Rift basins are generally barren in the Gongola Sub - basin of the Northern Benue Trough.
Vidyadhar, A; Chalavadi, G; Das, A
2013-03-30
Gravity separation of metals from plastics in pulverized e-waste using flowing film concentration in a shaking table was investigated. Over 51% rejection of plastics in a single stage operation was achieved under optimum conditions. The shaking table was shown to be suitable for processing ground PCBs. Pulverized e-waste containing 22% metals was enriched to around 40% metals in a single pass. Statistical models for the mass yield of metal-rich stream and its grade were developed by design of experiments. Optimization was carried out to maximize the mass yield at a target product grade and preferred operating regimes were established. Experiments were designed to prevent metal loss and over 95% recovery values were obtained under all conditions. Settling distances of metals and plastics were computed and shown to be good indicators of separation performance. Particle morphology and stratification in the troughs in between the riffles were shown to influence the separation significantly. Water flow-assisted motion of the plastics was captured and its role in determining the effectiveness of separation was described. The efficacy of tabling was well established for treating ground PCBs. The wet process was shown to be environment friendly and sustainable. It is also relatively cheap and has good potential for industrial application. However, rigorous cost estimates will be required before commercial application. Copyright © 2013 Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Li, J.; Wen, G.; Li, D.
2018-04-01
Trough mastering background information of Yunnan province grassland resources utilization and ecological conditions to improves grassland elaborating management capacity, it carried out grassland resource investigation work by Yunnan province agriculture department in 2017. The traditional grassland resource investigation method is ground based investigation, which is time-consuming and inefficient, especially not suitable for large scale and hard-to-reach areas. While remote sensing is low cost, wide range and efficient, which can reflect grassland resources present situation objectively. It has become indispensable grassland monitoring technology and data sources and it has got more and more recognition and application in grassland resources monitoring research. This paper researches application of multi-source remote sensing image in Yunnan province grassland resources investigation. First of all, it extracts grassland resources thematic information and conducts field investigation through BJ-2 high space resolution image segmentation. Secondly, it classifies grassland types and evaluates grassland degradation degree through high resolution characteristics of Landsat 8 image. Thirdly, it obtained grass yield model and quality classification through high resolution and wide scanning width characteristics of MODIS images and sample investigate data. Finally, it performs grassland field qualitative analysis through UAV remote sensing image. According to project area implementation, it proves that multi-source remote sensing data can be applied to the grassland resources investigation in Yunnan province and it is indispensable method.
Use of anti-TNF drug levels to optimise patient management
Papamichael, Konstantinos; Cheifetz, Adam S
2016-01-01
Anti-tumour necrosis factor (TNF) therapies, such as infliximab, adalimumab, certolizumab pegol and golimumab, have been proven to be effective for the treatment of patients with Crohn's disease and ulcerative colitis. However, 10%–30% of patients with inflammatory bowel disease (IBD) show no initial clinical benefit to anti-TNF therapy (primary non-response), and over 50% after an initial favourable outcome will lose response over time (secondary loss of response (SLR)). Numerous recent studies in IBD have revealed an exposure–response relationship suggesting a positive correlation between high serum anti-TNF concentrations and favourable therapeutic outcomes including clinical, biomarker and endoscopic remission, whereas antidrug antibodies have been associated with SLR and infusion reactions. Currently, therapeutic drug monitoring (TDM) is typically performed when treatment failure occurs either for SLR, drug intolerance (potential immune-mediated reaction) or infusion reaction (reactive TDM). Nevertheless, recent data demonstrate that proactive TDM and a treat-to-target (trough) therapeutic approach may more effectively optimise anti-TNF therapy efficacy, safety and cost. However, implementing TDM in real-life clinical practice is currently limited by the diversity in study design, therapeutic outcomes and assays used, which have hindered the identification of robust clinically relevant concentration thresholds. This review will focus mainly on the pharmacodynamic properties of anti-TNF therapy and the role of TDM in guiding therapeutic decisions in IBD. PMID:28839870
Mesas-Carrascosa, Francisco Javier; Verdú Santano, Daniel; Pérez Porras, Fernando; Meroño-Larriva, José Emilio; García-Ferrer, Alfonso
2017-01-01
Concentrated solar power (CSP) plants are increasingly gaining interest as a source of renewable energy. These plants face several technical problems and the inspection of components such as absorber tubes in parabolic trough concentrators (PTC), which are widely deployed, is necessary to guarantee plant efficiency. This article presents a system for real-time industrial inspection of CSP plants using low-cost, open-source components in conjunction with a thermographic sensor and an unmanned aerial vehicle (UAV). The system, available in open-source hardware and software, is designed to be employed independently of the type of device used for inspection (laptop, smartphone, tablet or smartglasses) and its operating system. Several UAV flight missions were programmed as follows: flight altitudes at 20, 40, 60, 80, 100 and 120 m above ground level; and three cruising speeds: 5, 7 and 10 m/s. These settings were chosen and analyzed in order to optimize inspection time. The results indicate that it is possible to perform inspections by an UAV in real time at CSP plants as a means of detecting anomalous absorber tubes and improving the effectiveness of methodologies currently being utilized. Moreover, aside from thermographic sensors, this contribution can be applied to other sensors and can be used in a broad range of applications where real-time georeferenced data visualization is necessary. PMID:28594353
Mesas-Carrascosa, Francisco Javier; Verdú Santano, Daniel; Pérez Porras, Fernando; Meroño-Larriva, José Emilio; García-Ferrer, Alfonso
2017-06-08
Concentrated solar power (CSP) plants are increasingly gaining interest as a source of renewable energy. These plants face several technical problems and the inspection of components such as absorber tubes in parabolic trough concentrators (PTC), which are widely deployed, is necessary to guarantee plant efficiency. This article presents a system for real-time industrial inspection of CSP plants using low-cost, open-source components in conjunction with a thermographic sensor and an unmanned aerial vehicle (UAV). The system, available in open-source hardware and software, is designed to be employed independently of the type of device used for inspection (laptop, smartphone, tablet or smartglasses) and its operating system. Several UAV flight missions were programmed as follows: flight altitudes at 20, 40, 60, 80, 100 and 120 m above ground level; and three cruising speeds: 5, 7 and 10 m/s. These settings were chosen and analyzed in order to optimize inspection time. The results indicate that it is possible to perform inspections by an UAV in real time at CSP plants as a means of detecting anomalous absorber tubes and improving the effectiveness of methodologies currently being utilized. Moreover, aside from thermographic sensors, this contribution can be applied to other sensors and can be used in a broad range of applications where real-time georeferenced data visualization is necessary.
Shielded serpentine traveling wave tube deflection structure
Hudson, Charles L.; Spector, Jerome
1994-01-01
A shielded serpentine slow wave deflection structure (10) having a serpene signal conductor (12) within a channel groove (46). The channel groove (46) is formed by a serpentine channel (20) in a trough plate (18) and a ground plane (14). The serpentine signal conductor (12) is supported at its ends by coaxial feed through connectors 28. A beam interaction trough (22) intersects the channel groove (46) to form a plurality of beam interaction regions (56) wherein an electron beam (54) may be deflected relative to the serpentine signal conductor (12).
1/32 Degree Real-Time Global Ocean Prediction and Value-Added Over 1/16 Degree Resolution
2007-07-30
SSH ridge to the south of these eddies are captured by at least one of the two data narrowing the trough, both assisting in cutting off eddy...In Section 3.4, the off from a GFO track a week later (Fig. 3D). Eddy #12 Hawaiian Islands region is used to compare results where was already...Journal of Marine Systems 65 (2007) 3-26 13 The second example is the cluster of 6 small eddies week leading up to 29 Sept. This formed an SSH trough
Nonimaging secondary concentrators for large rim angle parabolic troughs with tubular absorbers.
Ries, H; Spirkl, W
1996-05-01
For parabolic trough solar collectors with tubular absorbers, we design new tailored secondary concentrators. The design is applicable for any rim angle of a parabolic reflector. With the secondary, the concentration can be increased by a factor of more than 2 with a compact secondary reflector consisting of a single piece, even for the important case of a rim angle of 90 deg. The parabolic reflector can be used without changes; the reduced absorber is still tubular but smaller than the original absorber and slightly displaced toward the primary.
Flow of a surfactant across a thin liquid film wetting a solid substrate
DOE Office of Scientific and Technical Information (OSTI.GOV)
Peng, J.B.; He, S.X.; Dutta, P.
1989-12-15
Transfer of a monolayer (valinomycin) between two Langmuir troughs via an interconnecting glass bridge'' has been observed when there is a difference between the monolayer pressures in the two troughs. Assuming that the transfer occurs over the surface of the thin film of water that wets the bridge,'' the transfer rate can be used to estimate the thickness of the liquid film. The thickness thus determined may be used to determine the retarded van der Waals (Hamaker) constant associated with the interaction of the film with the underlying substrate.
Climatic Variations in Tropical West African Rainfall and the Implications for Military Planners
2008-06-01
perturbation pressure isobars. There is a ridge in (a) and a trough in (b) at the equator and to the east of the forcing region. Note that the pressure...Climatology course project team), CDR Eric Buch (C6F Oceanographer), Mr. Samson Brand (NRL Monterey), VADM Paul Gaffney (ret.), Prof. Russell Elsberry, LT...pressure isobars. There is a ridge in (a) and a trough in (b) at the equator and to the east of the forcing region. Note that the pressure to the west
Effect of Plate Hardening Behavior on the Deformation of Stainless Steel Metal Bellows
NASA Astrophysics Data System (ADS)
Hao, Zengliang; Luo, Shuyi; Zhao, He; Zhang, Chunxiang; Luo, Junting
2017-11-01
Tensile tests of original plate samples from three types of stainless steel metal bellows were performed at room temperature. The constitutive equations for the three hardening curves were obtained and fitted. The analysis results of the microstructure and fracture morphology of the tensile specimens show that the grain size of the plate with a high logarithmic-exponential hardening rate is uneven and the dimple of the shear fracture is elongated into an ellipse. By contrast, the grain size of the plate with a relatively low linear hardening rate is even and the dimple of the fracture is uniformly equiaxial. Finite element simulations of the hydraulic bulging and repeated limit bending deformation of the metal bellows of the three types of materials were also conducted. The repeated limit bending deformation process was tested experimentally. Although the effect of the hardening exponent on the residual stress of the metal bellows after hydraulic bulging is minimal, this exponent considerably influences the repeated limit bending deformation of the metal bellows after subsequent use. The trough hardening phenomenon is serious in the repeated limit bending process. Moreover, when the hardening exponent of the original plate is high, the resistance to bending fracture at the trough area is poor.
NASA Astrophysics Data System (ADS)
Chen, Tsing-Chang; Yen, Ming-Cheng; Wu, Kuang-Der; Ng, Thomas
1992-08-01
The time evolution of the Indian monsoon is closely related to locations of the northward migrating monsoon troughs and ridges which can be well depicted with the 30 60day filtered 850-mb streamfunction. Thus, long-range forecasts of the large-scale low-level monsoon can be obtained from those of the filtered 850-mb streamfunction. These long-range forecasts were made in this study in terms of the Auto Regressive (AR) Moving-Average process. The historical series of the AR model were constructed with the 30 60day filtered 850-mb streamfunction [˜ψ (850mb)] time series of 4months. However, the phase of the last low-frequency cycle in the ˜ψ (850mb) time series can be skewed by the bandpass filtering. To reduce this phase skewness, a simple scheme is introduced. With this phase modification of the filtered 850-mb streamfunction, we performed the pilot forecast experiments of three summers with the AR forecast process. The forecast errors in the positions of the northward propagating monsoon troughs and ridges at Day 20 are generally within the range of 1
2days behind the observed, except in some extreme cases.
NASA Astrophysics Data System (ADS)
Fukuchi, Rina; Yamaguchi, Asuka; Yamamoto, Yuzuru; Ashi, Juichiro
2017-08-01
The paleothermal structure and tectonic evolution of an accretionary prism is basic information for understanding subduction zone seismogenesis. To evaluate the entire paleotemperature profile of the Integrated Ocean Drilling Program (IODP) Site C0002 located in the off-Kumano region of the Nankai Trough and penetrate the inner accretionary wedge down to 3058.5 m below the seafloor (mbsf), we performed a vitrinite reflectance analysis for cuttings and core samples during IODP expeditions 338 and 348: Nankai Trough seismogenic zone experiment. Although vitrinite reflectance values (Ro) tend to increase with depth, two reversals of these values suggested the existence of thrust fault zones with sufficient displacements to offset the paleothermal structure. The estimated maximum paleotemperatures are 42-70°C at 1200-1300 mbsf, 44-100°C at 1600-2400 mbsf, and 56-115°C at 2600-3000 mbsf, respectively. These temperatures roughly coincide with estimated modern temperatures; however, at a smaller scale, the reconstructed partial paleogeothermal gradient (˜60-150°C/km) recorded at the hanging- and footwall of the presumed thrust fault zone is higher than the modern geothermal gradient (˜30-40°C/km). This high paleogeothermal gradient was possibly obtained prior to subduction, reflecting the large heat flow of the young Philippine Sea Plate.
Kim, Jin Seok; Cheong, June-Won; Kim, Yeo-Kyeoung; Park, Jinny; Mun, Yeung-Chul; Kang, Hye Jin; Yi, Hyeon Gyu; Lee, Je-Hwan; Kim, Yang Soo; Ryoo, Hun-Mo; Kim, Sung-Hyun; Kim, Ho Young; Kim, Jin Young; Lee, Dong-Gun; Kim, Hoon-Gu; Kim, Hawk; Joo, Young-Don; Min, Yoo Hong
2014-01-01
To identify the role of therapeutic drug monitoring of itraconazole (ITZ) in the setting of empirical antifungal therapy with intravenous (IV) ITZ, we performed a multicenter, prospective study in patients with hematological malignancies who had received antifungal prophylaxis with ITZ oral solution (OS). We evaluated the plasma levels of ITZ and hydroxy (OH) ITZ both before initiation of IV ITZ and on days 5-7 of IV ITZ. A total of 181 patients showed an overall success rate of 68.0 %. Prolonged baseline neutropenia and accompanying cardiovascular comorbidity were significantly associated with poor outcomes of the empirical antifungal therapy (P = 0.005 and P = 0.001, respectively). A significantly higher trough plasma level of OH ITZ per body weight was found in the patients who achieved success with empirical antifungal therapy (P = 0.036). There were no significant correlations between plasma concentrations of ITZ/OH ITZ (baseline or trough levels) and toxicities. Seven patients had a discontinuation of ITZ therapy due to toxicity. This study demonstrated that IV ITZ as empirical antifungal therapy was effective and therapeutic drug monitoring was helpful to estimate the outcome of empirical antifungal therapy in patients receiving antifungal prophylaxis with ITZ OS. To predict the outcome of empirical antifungal therapy with IV ITZ, we should evaluate baseline clinical characteristics and also perform the therapeutic drug monitoring of both ITZ and OH ITZ.