29 CFR 1910.178 - Powered industrial trucks.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., design, maintenance, and use of fork trucks, tractors, platform lift trucks, motorized hand trucks, and... new powered industrial trucks acquired and used by an employer shall meet the design and construction... that the electrical fittings and equipment are so designed, constructed and assembled that the units...

29 CFR 1910.178 - Powered industrial trucks.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., design, maintenance, and use of fork trucks, tractors, platform lift trucks, motorized hand trucks, and... new powered industrial trucks acquired and used by an employer shall meet the design and construction... that the electrical fittings and equipment are so designed, constructed and assembled that the units...

The unsafe driving acts of motorists in the vicinity of large trucks

DOT National Transportation Integrated Search

1999-11-01

In 1996 large trucks composed 8% of all vehicles involved in fatal crashes; however, truck-involved crashes resulted in 12% of the total fatalities. Occupants of large trucks compose only 14% of the fatalities resulting from fatal truck crashes; 86% ...

U.S. truck driver anthropometric study and multivariate anthropometric models for cab designs.

PubMed

Guan, Jinhua; Hsiao, Hongwei; Bradtmiller, Bruce; Kau, Tsui-Ying; Reed, Matthew R; Jahns, Steven K; Loczi, Josef; Hardee, H Lenora; Piamonte, Dominic Paul T

2012-10-01

This study presents data from a large-scale anthropometric study of U.S. truck drivers and the multivariate anthropometric models developed for the design of next-generation truck cabs. Up-to-date anthropometric information of the U.S. truck driver population is needed for the design of safe and ergonomically efficient truck cabs. We collected 35 anthropometric dimensions for 1,950 truck drivers (1,779 males and 171 females) across the continental United States using a sampling plan designed to capture the appropriate ethnic, gender, and age distributions of the truck driver population. Truck drivers are heavier than the U.S.general population, with a difference in mean body weight of 13.5 kg for males and 15.4 kg for females. They are also different in physique from the U.S. general population. In addition, the current truck drivers are heavier and different in physique compared to their counterparts of 25 to 30 years ago. The data obtained in this study provide more accurate anthropometric information for cab designs than do the current U.S. general population data or truck driver data collected 25 to 30 years ago. Multivariate anthropometric models, spanning 95% of the current truck driver population on the basis of a set of 12 anthropometric measurements, have been developed to facilitate future cab designs. The up-to-date truck driver anthropometric data and multivariate anthropometric models will benefit the design of future truck cabs which, in turn, will help promote the safety and health of the U.S. truck drivers.

Impact of left lane truck restriction strategies on multilane highways in Louisiana : a literature review.

DOT National Transportation Integrated Search

2009-04-01

Truck lane restriction strategies (TLRS) are a means of managing truck traffic on highways by prohibiting trucks from using certain lanes to minimize interaction between trucks and other vehicles. The purpose of this study is to review the literature...

Truck and Transport Mechanic. Occupational Analyses Series.

ERIC Educational Resources Information Center

McRory, Aline; Ally, Mohamed

This analysis covers tasks performed by a truck and transport mechanic, an occupational title some provinces and territories of Canada have also identified as commercial transport vehicle mechanic; transport truck mechanic; truck and coach technician; and truck and transport service technician. A guide to analysis discusses development, structure,…

Dump truck-related deaths in construction, 1992-2007.

PubMed

McCann, Michael; Cheng, Mei-Tai

2012-05-01

Dump trucks are universally used in construction and other industries to haul materials to the location and to remove waste materials. The source for dump truck-related fatality data was the Bureau of Labor Statistics Census of Fatal Occupational Injuries (CFOI) Research File. From 1992 to 2007, 829 construction workers were killed in dump truck-related incidents nationwide. Of those, 336 were dump truck operators with 215 deaths occurring in street and highway incidents. Another 343 deaths involved workers on foot, three-quarters struck by dump trucks. Sixty-four of the construction workers killed were maintaining dump trucks, 22 when caught between the truck frame and a falling dump truck bed. Of the 86 other deaths, 55 involved streets and highways. Recommendations include: (i) improving the reporting of seat belt usage in fatality reports; (ii) requiring use of seat belts; (iii) requiring the use of backup alarms, spotters, or other methods to alert dump truck operators to workers in their blind spots; (iv) prohibiting direct dumping at river banks and embankments; (v) using cameras or radar to enforce stopping at railway crossings; and (xi) enforcing worker safety practices (e.g., lockout/tagout procedures on elevated dump truck beds). Copyright © 2011 Wiley Periodicals, Inc.

Approaches of truck drivers and non-truck drivers toward reckless on-road behavior.

PubMed

Rosenbloom, Tova; Eldror, Ehud; Shahar, Amit

2009-07-01

The purpose of the study was to compare the reported approaches of truck drivers to those of non-truck drivers toward reckless on-road behaviors. One hundred and sixty-seven adult males, including 70 non-truck drivers, completed the questionnaires voluntarily. The truck drivers were employees of a concrete manufacturing company working at various company plants throughout Israel. Seventy were professional mixer truckers and 27 were tip-truckers. The participants completed the Reckless Driving Self-Report Scale based on Taubman Ben-Ari et al. [Taubman Ben-Ari, O., Florian, V., Mikulincer, M., 1999. The impact of mortality salience on reckless driving: a test of terror management mechanisms. Journal of Personality and Social Psychology 76, 35-45], adapted for truck drivers for this study. It was expected that non-professional, as compared to professional (truck) drivers, would be more permissive regarding reckless driving, since driving risks are less prominent in their daily driving experience. An ANOVA performed on mean reckless-driving scores yielded significant results. The post hoc Schéffe test indicated significantly higher reckless-driving scores for automobile drivers as compared to both mixer-truck driver scores and tip-truck driver scores. In addition, the reckless-driving scores for mixer-truck drivers were significantly higher than the tip-truck driver scores. We discuss various explanations for the findings and consider possible implications for training strategies in organizations as well as for media campaigns focused on mutual safe road use of truck drivers and private vehicle drivers.

75 FR 20396 - Yale Industrial Trucks-PGH, Inc. Monroeville, PA; Notice of Negative Determination Regarding...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-19

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-71,634] Yale Industrial Trucks... Industrial Trucks-PGH, Inc., Monroeville, Pennsylvania, was based on the findings that: The subject firm had not shifted abroad forklift truck sales and maintenance services or imported forklift truck sales and...

Truck Choice Modeling: Understanding California's Transition to Zero-Emission Vehicle Trucks Taking into Account Truck Technologies, Costs, and Fleet Decision Behavior

DOT National Transportation Integrated Search

2017-11-01

This report presents the results of a project to develop a truck vehicle/fuel decision choice model for California and to use that model to make initial projections of truck sales by technology out to 2050. The report also describes the linkage of th...

75 FR 11120 - Hand Trucks and Certain Parts Thereof from the People's Republic of China: Final Results of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-10

... specifically to transport golf bags; and wheels and tires used in the manufacture of hand trucks. The written... DEPARTMENT OF COMMERCE International Trade Administration [A-570-891] Hand Trucks and Certain... sunset review of the antidumping duty order on hand trucks and certain parts thereof (hand trucks) from...

Underride safety protection: benefit-cost assessment of rear-impact guards for the North Dakota farm truck fleet.

PubMed

Vachal, Kimberly; Tumuhairwe, Esther K; Berwick, Mark

2009-04-01

The North Dakota Legislature recently passed a law exempting the state's agricultural truck fleet from a federal safety program requirement for rear-guard equipment on large trucks. This equipment has been shown to reduce crash severity when a passenger vehicle collides with the rear of the truck. This study uses truck fleet, truck crash, and injury severity data to estimate the public safety benefit derived from passenger-vehicle underride protection during rear-end crashes involving large agricultural trucks in North Dakota. A benefit-cost analysis of crash injury avoidance is developed based on the frequency and severity of rear-end truck collisions in North Dakota between 2001 and 2007. The injury avoidance benefits and commercial vehicle safety grant benefits are estimated to be $11.4 to $20.2 million during the seven-year depreciable truck life. The public safety benefits for rear-impact guards are higher than the estimated lifetime cost for the equipment and maintenance of $8.1 million.

Vehicle to vehicle communications for trucks.

DOT National Transportation Integrated Search

2014-01-01

The trucking industry is a critical component of American commerce. The American : Trucking Association estimates that over 80 percent of U.S. communities depend : exclusively on trucking for delivery of their goods and commodities

Electric urban delivery trucks: energy use, greenhouse gas emissions, and cost-effectiveness.

PubMed

Lee, Dong-Yeon; Thomas, Valerie M; Brown, Marilyn A

2013-07-16

We compare electric and diesel urban delivery trucks in terms of life-cycle energy consumption, greenhouse gas (GHG) emissions, and total cost of ownership (TCO). The relative benefits of electric trucks depend heavily on vehicle efficiency associated with drive cycle, diesel fuel price, travel demand, electric drive battery replacement and price, electricity generation and transmission efficiency, electric truck recharging infrastructure, and purchase price. For a drive cycle with frequent stops and low average speed such as the New York City Cycle (NYCC), electric trucks emit 42-61% less GHGs and consume 32-54% less energy than diesel trucks, depending upon vehicle efficiency cases. Over an array of possible conditions, the median TCO of electric trucks is 22% less than that of diesel trucks on the NYCC. For a drive cycle with less frequent stops and high average speed such as the City-Suburban Heavy Vehicle Cycle (CSHVC), electric trucks emit 19-43% less GHGs and consume 5-34% less energy, but cost 1% more than diesel counterparts. Considering current and projected U.S. regional electricity generation mixes, for the baseline case, the energy use and GHG emissions ratios of electric to diesel trucks range from 48 to 82% and 25 to 89%, respectively.

What`s available in industrial vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holzhauer, R.

A large assortment of material handling vehicles are available for transporting and lifting products. Equipment is offered with electric (battery) and internal combustion power, operator walking alongside or riding, and inside or outside applications. Factors such as load capacity, turning radius, aisle width, travel speed, lifting height, controls, and cost also enter the selection equation. The various types of vehicles serving the industrial truck market are broken into seven classes, according to guidelines established by the Industrial Truck Association (ITA). This association deals with issues of common interests to manufacturers of fork lifts, tow tractors, rough terrain vehicles, hand palletmore » trucks, automated guided vehicles, and their suppliers; develops voluntary engineering practices; and collects and disseminates statistical information relating to the industrial truck marketplace. The seven classes are: Electric Motor Rider Trucks; Electric Motor Narrow Aisle Trucks; Electric Motor Hand Trucks; Internal Combustion Engine Trucks, cushion tired; Internal Combustion Engine Trucks, pneumatic tired; Electric and Internal Combustion Engine Tractors; and Rough Terrain Fork Lift Trucks. The following pages present a descriptive and pictorial overview of the equipment available in the first five vehicle classes. The last two categories are not covered because of their limited industrial use.« less

Assessing crash risk considering vehicle interactions with trucks using point detector data.

PubMed

Hyun, Kyung Kate; Jeong, Kyungsoo; Tok, Andre; Ritchie, Stephen G

2018-03-12

Trucks have distinct driving characteristics in general traffic streams such as lower speeds and limitations in acceleration and deceleration. As a consequence, vehicles keep longer headways or frequently change lane when they follow a truck, which is expected to increase crash risk. This study introduces several traffic measures at the individual vehicle level to capture vehicle interactions between trucks and non-trucks and analyzed how the measures affect crash risk under different traffic conditions. The traffic measures were developed using headways obtained from Inductive Loop Detectors (ILDs). In addition, a truck detection algorithm using a Gaussian Mixture (GM) model was developed to identify trucks and to estimate truck exposure from ILD data. Using the identified vehicle types from the GM model, vehicle interaction metrics were categorized into three groups based on the combination of leading and following vehicle types. The effects of the proposed traffic measures on crash risk were modeled in two different cases of prior- and non-crash using a case-control approach utilizing a conditional logistic regression. Results showed that the vehicle interactions between the leading and following vehicle types were highly associated with crash risk, and further showed different impacts on crash risk by traffic conditions. Specifically, crashes were more likely to occur when a truck following a non-truck had shorter average headway but greater headway variance in heavy traffic while a non-truck following a truck had greater headway variance in light traffic. This study obtained meaningful conclusions that vehicle interactions involved with trucks were significantly related to the crash likelihood rather than the measures that estimate average traffic condition such as total volume or average headway of the traffic stream. Copyright © 2018 Elsevier Ltd. All rights reserved.

Heavy truck casualty collisions, 2001-2005

DOT National Transportation Integrated Search

2010-04-01

This document reviews casualty collisions (fatalities and injuries) involving heavy trucks in Canada : from 2001 to 2005. Collisions involving heavy trucks include all vehicles in these collisions, such as : passenger cars, light trucks and vans, hea...

49 CFR 523.9 - Truck tractors.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., DEPARTMENT OF TRANSPORTATION VEHICLE CLASSIFICATION § 523.9 Truck tractors. Truck tractors for the purpose of this part are considered as any truck tractor as defined in 49 CFR part 571 having a GVWR above 26,000...

Truck trip generation data

DOT National Transportation Integrated Search

2001-01-01

The increased importance of truck activity in both transportation engineering and planning : has created a need for truck-oriented analytical tools. A particular planning need is for trip : generation data that can be used to estimate truck traffic p...

The Causes of Logging Truck Delays on Two West Virginia Logging Operations

Treesearch

John E. Baumgras

1978-01-01

Logging truck downtime increases timber harvesting costs. To determine the extent and causes of truck delays, four logging trucks on two separate operations were monitored for a 7-month period by recording speedometers and with tallies of delay causes. The results show the number of truck delays per shift, their duration, and the total delay time per shift for eight...

Effects of Particle Filters and Accelerated Engine Replacement on Heavy-Duty Diesel Vehicle Emissions of Black Carbon, Nitrogen Oxides, and Ultrafine Particles

NASA Astrophysics Data System (ADS)

Kirchstetter, T.; Preble, C.; Dallmann, T. R.; DeMartini, S. J.; Tang, N. W.; Kreisberg, N. M.; Hering, S. V.; Harley, R. A.

2013-12-01

Diesel particle filters have become widely used in the United States since the introduction in 2007 of a more stringent exhaust particulate matter emission standard for new heavy-duty diesel vehicle engines. California has instituted additional regulations requiring retrofit or replacement of older in-use engines to accelerate emission reductions and air quality improvements. This presentation summarizes pollutant emission changes measured over several field campaigns at the Port of Oakland in the San Francisco Bay Area associated with diesel particulate filter use and accelerated modernization of the heavy-duty truck fleet. Pollutants in the exhaust plumes of hundreds of heavy-duty trucks en route to the Port were measured in 2009, 2010, 2011, and 2013. Ultrafine particle number, black carbon (BC), nitrogen oxides (NOx), and nitrogen dioxide (NO2) concentrations were measured at a frequency ≤ 1 Hz and normalized to measured carbon dioxide concentrations to quantify fuel-based emission factors (grams of pollutant emitted per kilogram of diesel consumed). The size distribution of particles in truck exhaust plumes was also measured at 1 Hz. In the two most recent campaigns, emissions were linked on a truck-by-truck basis to installed emission control equipment via the matching of transcribed license plates to a Port truck database. Accelerated replacement of older engines with newer engines and retrofit of trucks with diesel particle filters reduced fleet-average emissions of BC and NOx. Preliminary results from the two most recent field campaigns indicate that trucks without diesel particle filters emit 4 times more BC than filter-equipped trucks. Diesel particle filters increase emissions of NO2, however, and filter-equipped trucks have NO2/NOx ratios that are 4 to 7 times greater than trucks without filters. Preliminary findings related to particle size distribution indicate that (a) most trucks emitted particles characterized by a single mode of approximately 100 nm in diameter and (b) new trucks originally equipped with diesel particle filters were 5 to 6 times more likely than filter-retrofitted trucks and trucks without filters to emit particles characterized by a single mode in the range of 10 to 30 nm in diameter.

Road Traffic Related Injury Severity in Truck Drivers: A Prospective Medical and Technical Analysis of 582 Truck Crashes.

PubMed

Decker, Sebastian; Otte, Dietmar; Muller, Christian Walter; Omar, Mohamed; Krettek, Christian; Haasper, Carl; Brand, Stephan

2016-06-01

While cyclists and pedestrians are known to be at significant risk for severe injuries when exposed to road traffic accidents (RTA) involving trucks, little is known about RTA injury risk for truck drivers. The aim of this study was to analyze the injury severity in truck drivers following RTAs. Our local accident research unit prospectively documented 43000 RTAs involving 582 trucks between 2000 and 2011. Injury severity, including the abbreviated injury scale (AIS) and the maximum abbreviated injury scale (MAIS) were analyzed. Technical parameters (e.g. delta-v, direction of impact), the location of accident, and its dependency on the road type were also taken into consideration. Thirteen percent (77/582) of truck drivers were injured. Extremities were found to be at highest risk of injury with the lower extremities (36x) being injured most severely (10x: AIS 2 and 3). Death occurred only after collisions with other trucks, and severity of injuries increased with an increased speed limit. The maximum abbreviated injury scale was higher in the crash opponents (56x MAIS ≥ 3) compared to the truck drivers (8x MAIS ≥ 3). Overall, 82% of the crash opponents were injured. The safety of truck drivers is assured by their vehicles, the consequence being that the risk of becoming injured is likely to be low. However, the legs especially are at high risk for severe injuries during RTAs. This probability increases in the instance of a collision with another truck. Nevertheless, in RTAs involving trucks and regular passenger vehicles, the other party is in higher risk of injury.

FedEx Hybrid Electric Delivery Truck Testing | Transportation Research |

Science.gov Websites

hybridization. Hybrid Electric Straight Box Trucks In 2013, the team completed its six-month evaluation of six hybrid electric trucks and six conventional diesel trucks operated by FedEx Express in Ontario

Prioritizing improvements to truck driver vision.

DOT National Transportation Integrated Search

2006-03-01

This report presents the results of a three-part study of truck driver exterior vision and its safety consequences. In part one, : crash data are analyzed to document vision-related truck crash issues. About 20% of truck-initiated crashes occur in : ...

[Exposure to whole-body vibration of forklift truck operators in dockyards--actual exposure in Japan and evaluation by EN 13059].

PubMed

Tsujimura, Hiroji; Taoda, Kazushi; Nishiyama, Katsuo

2006-09-01

Low-back disorders are well documented as occupational hazards among forklift truck operators. The potential risk factors that may lead to low-back pain include exposure to whole-body vibration (WBV). In Europe, test methods were developed to evaluate WBV in industrial trucks, and the European Standard which defines the methods has been published. We measured the vibrations of forklift trucks operated in the Hanshin harbour area adopting procedures based on the CEN test and report the evaluation results. If the WBV magnitudes of the ride on forklift trucks in the workplace were less than or comparable to those in the CEN test, the CEN test could be considered useful for the risk assessment of forklift truck operators exposed to WBV. In order to verify the applicability of the CEN test to the evaluation of WBV exposure in the field, we conducted measurements of the WBV of four forklift trucks for 19 d. The trucks had already been examined by the CEN test. The truck velocity, driver position (sitting or not), and gear lever position were also measured, and video footage was obtained for the study. The results indicate that the vertical WBV magnitudes of the four forklift trucks were below the CEN test values. No dominant WBV direction was observed on any of the measurement days. The Health value (obtained by combining the values determined from the vibration in orthogonal coordinates) was comparable to that from the CEN test for one truck. The values for the other three trucks were lower. The data obtained for three forklift trucks were analyzed in each operating condition. The vertical WBV magnitudes and Health values for the three trucks were below the CEN test values when the trucks were travelling forwards with a load. The WBV in the anterior-posterior direction had the largest adverse effect on the human body of the three orthogonal directions when the trucks were used for loading and unloading. The results suggest the CEN test can be applied to the evaluation of exposure to WBV from forklift trucks operating in the vicinity of the Hanshin harbour. It was observed that the anterior-posterior WBV is considerable, mostly through exposure occurring in the lifting mode. However, the CEN test is based on the travelling mode, and further WBV measurements under real working conditions with exact descriptions of detailed work situations and operating conditions are required.

Developing a GPS-based truck freight performance measure platform.

DOT National Transportation Integrated Search

2010-05-01

Although trucks move the largest volume and value of goods in urban areas, relatively little is known about their travel : patterns and how the roadway network performs for trucks. Global positioning systems (GPS) used by trucking : companies to mana...

Wisconsin large truck safety and enforcement study.

DOT National Transportation Integrated Search

2011-07-01

The Wisconsin Large Truck Safety and Enforcement Study (LTS&E) focused on a system-wide evaluation of large truck safety in the : state of Wisconsin. This study analyzes crash data related to large trucks that are close to the following criteria: gre...

Large truck crash profile : the 1998 national picture

DOT National Transportation Integrated Search

2000-01-01

This annual edition of the Large Truck Crash Profile contains descriptive statistics about fatal and non-fatal (injury and property-damage-only) large truck crashes that occurred in 1998. The profile includes only some of the major aspects of truck c...

Truck Noise XI : Evaluation and Reduction of Heavy-Duty Truck Noise

DOT National Transportation Integrated Search

1976-09-01

This report describes the work performed to examine the noise sources on two common truck configurations manufactured by this company, and to evaluate the noise reduction effectiveness of retrofit hardware. The two trucks selected were Cab-Over-Engin...

Finite element analysis on the bending condition of truck frame before and after opening

NASA Astrophysics Data System (ADS)

Cai, Kaiwu; Cheng, Wei; Lu, Jifu

2018-05-01

Based on the design parameters of a truck frame, the structure design and model of the truck frame are built. Based on the finite element theory, the load, the type of fatigue and the material parameters of the frame are combined with the semi-trailer. Using finite element analysis software, after a truck frame hole in bending condition for the finite element analysis of comparison, through the analysis found that the truck frame hole under bending condition can meet the strength requirements are very helpful for improving the design of the truck frame.

Research on mining truck vibration control based on particle damping

NASA Astrophysics Data System (ADS)

Liming, Song; Wangqiang, Xiao; Zeguang, Li; Haiquan, Guo; Zhe, Yang

2018-03-01

More and more attentions were got by people about the research on mining truck driving comfort. As the vibration transfer terminal, cab is one of the important part of mining truck vibration control. In this paper, based on particle damping technology and its application characteristics, through the discrete element modeling, DEM & FEM coupling simulation and analysis, lab test verification and actual test in the truck, particle damping technology was successfully used in driver’s seat base of mining truck, cab vibration was reduced obviously, meanwhile applied research and method of particle damping technology in mining truck vibration control were provided.

Study of Technological Improvements to Optimize Truck Configurations for Fuel Economy

DOT National Transportation Integrated Search

1975-09-01

The truck types that accounted for most of the fuel consumed were identified and modeled by computer analysis. Baseline fuel consumption was calculated for the major truck types over specific duty cycles. Design improvements in the truck were then mo...

Cost-benefit evaluation of large truck-automobile speed limit differentials on rural interstate highways.

DOT National Transportation Integrated Search

2005-11-01

Speed differentials between large trucks and automobiles on rural interstate highways are due to : both state regulated speed limits and commercial trucking company policies that restrict maximum truck : speeds. The initial portion of this effort inv...

Striping truck utilization at Crawfordsville and Greenfield.

DOT National Transportation Integrated Search

2013-12-01

At the time this project was launched, INDOT was operating two paint trucks per district (one edge line truck and one center line truck). : This project was launched to determine the feasibility of painting all the lane miles in each district with a ...

Effect of Michigan multi-axle trucks on pavement distress and profile: executive summary.

DOT National Transportation Integrated Search

2009-02-01

Truck traffic is a major factor in pavement design because truck loads are the primary cause of : pavement distresses. Trucks have different axle configurations that cause different levels of : pavement damage. The American Association of State Highw...

Identifying the potential of improved heavy truck crashworthiness to reduce death and injury for truck drivers.

DOT National Transportation Integrated Search

2015-07-01

Advanced crash avoidance technologies (ACATs) for trucks have been developed in recent years and are beginning : to be deployed. Prior to the development of standards for heavy truck crashworthiness and occupant protection, : additional characterizat...

Estimation of the demand for commercial truck parking on interstate highways in Virginia

DOT National Transportation Integrated Search

2003-01-01

The steady growth of commercial truck traveling on most Interstate and primary highways has resulted in increasing demand for both public rest areas and private truck stops in Virginia. In addition, inadequate parking spaces for commercial trucks may...

Effects of geometric design features on truck crashes on limited-access highways.

DOT National Transportation Integrated Search

2012-06-01

Freight can be transported between most points in the country quite efficiently using trucks. However, involvement of large : trucks in crashes can cause much damage and serious injuries, due to their large sizes and heavy weights. Large truck : cras...

National bicycling and walking study : 10 year status report

DOT National Transportation Integrated Search

1995-12-01

This case study examines trucking across the western U.S.-Canada border and how it is influenced by truck size and weight (TS&W) regulations. Western border trucking differs from eastern border trucking in terms of the types of commodities being hand...

Truck travel characteristics as an indicator of system condition and performance.

DOT National Transportation Integrated Search

2011-07-01

The effect of trucks on the level of service is determined by considering passenger car equivalents (PCE) of trucks. The : Highway Capacity Manual (HCM) uses a single PCE value for all tucks combined. However, the composition of truck traffic : varie...

Truck monitoring and warning systems for freeway-to-freeway connections

DOT National Transportation Integrated Search

1999-10-01

This research focuses on the development and evaluation of a truck monitoring and warning (TM&W) system for detecting high, long, fast trucks at freeway-to-freeway connections and activating displays to warn the truck drivers of potential hazards as ...

Analysis of risk factors in severity of rural truck crashes.

DOT National Transportation Integrated Search

2016-04-01

Trucks are a vital part of the logistics system in North Dakota. Recent energy developments have : generated exponential growth in the demand for truck services. With increased density of trucks in the : traffic mix, it is reasonable to expect some i...

Developing high-resolution urban scale heavy-duty truck emission inventory using the data-driven truck activity model output

NASA Astrophysics Data System (ADS)

Perugu, Harikishan; Wei, Heng; Yao, Zhuo

2017-04-01

Air quality modelers often rely on regional travel demand models to estimate the vehicle activity data for emission models, however, most of the current travel demand models can only output reliable person travel activity rather than goods/service specific travel activity. This paper presents the successful application of data-driven, Spatial Regression and output optimization Truck model (SPARE-Truck) to develop truck-related activity inputs for the mobile emission model, and eventually to produce truck specific gridded emissions. To validate the proposed methodology, the Cincinnati metropolitan area in United States was selected as a case study site. From the results, it is found that the truck miles traveled predicted using traditional methods tend to underestimate - overall 32% less than proposed model- truck miles traveled. The coefficient of determination values for different truck types range between 0.82 and 0.97, except the motor homes which showed least model fit with 0.51. Consequently, the emission inventories calculated from the traditional methods were also underestimated i.e. -37% for NOx, -35% for SO2, -43% for VOC, -43% for BC, -47% for OC and - 49% for PM2.5. Further, the proposed method also predicted within ∼7% of the national emission inventory for all pollutants. The bottom-up gridding methodology used in this paper could allocate the emissions to grid cell where more truck activity is expected, and it is verified against regional land-use data. Most importantly, using proposed method it is easy to segregate gridded emission inventory by truck type, which is of particular interest for decision makers, since currently there is no reliable method to test different truck-category specific travel-demand management strategies for air pollution control.

Driver-related factors in crashes between large trucks and passenger vehicles

DOT National Transportation Integrated Search

1999-04-01

Large trucks are involved in close to 400,000 police-reported crashes each year, of which 4,500 involve a fatality. About 60% of fatal truck crashes involve one large truck colliding with a single passenger vehicle. Prevention of these crashes requir...

Truck monitoring and warning systems for freeway-to-freeway connections : summary

DOT National Transportation Integrated Search

1999-10-01

This project focuses on the development and evaluation of a truck monitoring and warning (TM&W) system for detecting high, long, fast trucks at freeway-to-freeway connections and activating displays to warn the truck drivers of potential hazards as t...

49 CFR 399.207 - Truck and truck-tractor access requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS EMPLOYEE SAFETY AND HEALTH STANDARDS Step, Handhold, and Deck Requirements for Commercial Motor Vehicles § 399.207 Truck and truck-tractor access requirements. (a) General rule. Any person entering or...

Truck accidents at freeway ramps : data analysis and high-risk site identification

DOT National Transportation Integrated Search

1998-01-01

To examine the relationship of ramp design to truck accident rates, this paper presents an analysis of truck accidents in Washington State, plus a comparison to limited data from Colorado and California. The authors group freeway truck accidents by r...

Obesity and Other Risk Factors: The National Survey of U.S. Long-Haul Truck Driver Health and Injury

PubMed Central

Sieber, W. Karl; Robinson, Cynthia F.; Birdsey, Jan; Chen, Guang X.; Hitchcock, Edward M.; Lincoln, Jennifer E.; Nakata, Akinori; Sweeney, Marie H.

2015-01-01

Background Drivers of heavy and tractor-trailer trucks accounted for 56% of all production and nonsupervisory employees in the truck transportation industry in 2011. There are limited data for illness and injury in long-haul truck drivers, which prompted a targeted national survey. Methods Interviewers collected data during 2010 from 1,670 long-haul truck drivers at 32 truck stops across the 48 contiguous United States that were used to compute prevalence estimates for self-reported health conditions and risk factors. Results Obesity (69% vs. 31%, P <0.01) and current smoking (51% vs. 19%, P <0.01) were twice as prevalent in long-haul truck drivers as in the 2010 U.S. adult working population. Sixty-one percent reported having two or more of the risk factors: hypertension, obesity, smoking, high cholesterol, no physical activity, 6 or fewer hours of sleep per 24-hr period. Conclusion Survey findings suggest a need for targeted interventions and continued surveillance for long-haul truck drivers. PMID:24390804

Advanced vehicle dynamics of heavy trucks with the perspective of road safety

NASA Astrophysics Data System (ADS)

Trigell, Annika Stensson; Rothhämel, Malte; Pauwelussen, Joop; Kural, Karel

2017-10-01

This paper presents state-of-the art within advanced vehicle dynamics of heavy trucks with the perspective of road safety. The most common accidents with heavy trucks involved are truck against passenger cars. Safety critical situations are for example loss of control (such as rollover and lateral stability) and a majority of these occur during speed when cornering. Other critical situations are avoidance manoeuvre and road edge recovery. The dynamic behaviour of heavy trucks have significant differences compared to passenger cars and as a consequence, successful application of vehicle dynamic functions for enhanced safety of trucks might differ from the functions in passenger cars. Here, the differences between vehicle dynamics of heavy trucks and passenger cars are clarified. Advanced vehicle dynamics solutions with the perspective of road safety of trucks are presented, beginning with the topic vehicle stability, followed by the steering system, the braking system and driver assistance systems that differ in some way from that of passenger cars as well.

Development of Diesel Engine Operated Forklift Truck for Explosive Gas Atmospheres

NASA Astrophysics Data System (ADS)

Vishwakarma, Rajendra Kumar; Singh, Arvind Kumar; Ahirwal, Bhagirath; Sinha, Amalendu

2018-02-01

For the present study, a prototype diesel engine operated Forklift truck of 2 t capacity is developed for explosive gas atmosphere. The parts of the Forklift truck are assessed against risk of ignition of the explosive gases, vapors or mist grouped in Gr. IIA and having ignition temperature more than 200°C. Identification of possible sources of ignition and their control or prevention is the main objective of this work. The design transformation of a standard Forklift truck into a special Forklift truck is made on prototype basis. The safety parameters of the improved Forklift truck are discussed in this paper. The specially designed Forklift truck is useful in industries where explosive atmospheres may present during normal working conditions and risk of explosion is a concern during handling or transportation of materials. This indigenous diesel engine based Forklift truck for explosive gas atmosphere classified as Zone 1 and Zone 2 area and gas group IIA is developed first time in India in association with the Industry.

Measurement of Workability of Fresh Concrete Using a Mixing Truck

PubMed Central

Amziane, Sofiane; Ferraris, Chiara F.; Koehler, Eric P.

2005-01-01

The main objective of this study is to evaluate the workability of fresh portland cement concrete while it is still in the mixing truck by determining fundamental rheological parameters (plastic viscosity and yield stress). Nine concrete mixtures with different values of yield stress and plastic viscosity were tested in a concrete truck. The measurements made with the truck were based on the typical method of determining the flow behavior in a traditional fluid rheometer; that is, the shear rate in the mixing truck was swept from high to low by varying the rotation speed of the drum. The results of these experiments are discussed and compared with data provided by the ICAR rheometer, a portable rheometer designed for measuring concrete rheology. The test results indicate that the mixing truck equipment is sufficiently sensitive to detect differences in yield stress, slump, and plastic viscosity. However, the plastic viscosity determined by the truck measurement did not correlate with plastic viscosity as measured by the ICAR rheometer, while the yield stress determined by the truck measurement did correlate well with the measured slump and the ICAR rheometer results Suggestions are given on how to improve the mixing truck for better use as a rheometer. PMID:27308103

49 CFR 230.108 - Steam locomotive leading and trailing trucks.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Steam locomotive leading and trailing trucks. 230.108 Section 230.108 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL... and trailing trucks. (a) Maintenance. Trucks shall be maintained in safe and suitable condition for...

49 CFR 533.5 - Requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... per gallon, in the model year specified as applicable: Table I Model year 2-wheel drive light trucks Captive imports Other 4-wheel drive light trucks Captive imports Other Limited product line light trucks... standard Captive imports Others 2-wheel drive light trucks Captive imports Others 4-wheel drive light...

49 CFR 533.5 - Requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... per gallon, in the model year specified as applicable: Table I Model year 2-wheel drive light trucks Captive imports Other 4-wheel drive light trucks Captive imports Other Limited product line light trucks... standard Captive imports Others 2-wheel drive light trucks Captive imports Others 4-wheel drive light...

49 CFR 533.5 - Requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... per gallon, in the model year specified as applicable: Table I Model year 2-wheel drive light trucks Captive imports Other 4-wheel drive light trucks Captive imports Other Limited product line light trucks... standard Captive imports Others 2-wheel drive light trucks Captive imports Others 4-wheel drive light...

Truck travel characteristics as an indicator of system condition and performance : [technical summary].

DOT National Transportation Integrated Search

2011-01-01

Truck traffic has significantly increased in past decades. The effect of trucks on the level of service is determined by considering passenger car equivalents (PCE) of trucks. The Highway Capacity Manual (HCM) uses a single PCE value for all tucks co...

Improving the safety of older truck drivers : developing a framework for moving forward.

DOT National Transportation Integrated Search

2016-12-01

The overarching goal of this project was to contribute to a reduction in crashes among older truck drivers. The project represents the starting point for developing a program that can be used by older truck drivers and trucking company management to ...

Developing a robust survey methodology for collecting information on the port truck drayage industry.

DOT National Transportation Integrated Search

2014-09-01

This paper describes the population characteristics in the drayage trucking population of the Port of Seattle as determined by the 2013 Truck : Driver Survey. The 2013 Truck Driver Survey was created to give the Port of Seattle more information on th...

Development of a large truck safety data needs study plan. Vol. 1, Summary

DOT National Transportation Integrated Search

1986-02-01

This report discusses the results of a study to determine the data needs necessary to address truck safety issues and to develop a data collection and analysis plan. Priority truck safety issues that are amenable to truck accident data analyses were ...

Development of Criteria for the Use of Asphalt-Rubber as a Stress-Absorbing Membrane Interlayer (SAMI).

DTIC Science & Technology

1983-12-01

membrane included " three asphalt-rubber distributor trucks " one asphalt-rubber mixer • one kerosene tanker " one chip spreader " three dump trucks...was recorded with the temperature. 4. The asphalt-rubber was pumped into a spreader truck. The truck temperature, sample temperature, and viscosity...not become clogged. The chip-spreading operation immnedi- ately followed the distributor truck. The chip spreader was immediately fol- lowed by the

Driver exposure to combustion particles in the U.S. Trucking industry.

PubMed

Davis, M E; Smith, T J; Laden, F; Hart, J E; Blicharz, A P; Reaser, P; Garshick, E

2007-11-01

A large study of combustion particle exposures for drivers of diesel-powered trucks was conducted in collaboration with an epidemiologic study of lung cancer outcomes for workers in the trucking industry. Three components of diesel exhaust combustion particles (PM(2.5), elemental carbon, and organic carbon) were measured inside the driver cabs of diesel-powered trucks from 36 different trucking terminals across the United States between 2001 and 2005. In-cab particle exposures for drivers assigned to both short and long distance trips were observed, as well as information on the smoking status of the driver, truck characteristics such as age and model, and weather conditions during the sampling session. This article summarizes these findings and describes the relationship between exhaust particles and various determinants of exposure. The results suggest that in-cab particle exposures are positively related to smoking, ambient particle concentrations, truck age, and open windows, with other significant modifying factors such as weather. This study represents the largest and most comprehensive exposure assessment of drivers in the trucking industry, encompassing a 4-year period of observations on diesel and exhaust particle exposures nationwide. The results are relevant not only to the occupational group of truck drivers being examined but also to the general population that live, commute, or work within proximity to diesel-fueled traffic or trucking terminals.

Energy Consumption and Cost Savings of Truck Electrification for Heavy-Duty Vehicle Applications

DOE PAGES

Gao, Zhiming; Lin, Zhenhong; Franzese, Oscar

2017-01-01

Our paper evaluates the application of battery electric vehicles (BEVs) and genset plug-in hybrid electric vehicles (PHEVs) to Class-7 local delivery trucks and genset PHEV for Class-8 utility bucket trucks over widely real-world driving data performed by conventional heavy-duty trucks.

Estimation of the demand for commercial truck parking on interstate highways in Virginia : final report.

DOT National Transportation Integrated Search

2004-01-01

The steady growth of commercial truck travel has led to an increasing demand for truck parking spaces at public rest areas and private truck stops on interstate highways in Virginia. This study developed a methodology to determine the supply and dema...

30 CFR 56.16016 - Lift trucks.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Lift trucks. 56.16016 Section 56.16016 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND....16016 Lift trucks. Fork and other similar types of lift trucks shall be operated with the— (a) Upright...

30 CFR 57.16016 - Lift trucks.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Lift trucks. 57.16016 Section 57.16016 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... § 57.16016 Lift trucks. Fork and other similar types of lift trucks shall be operated with the: (a...

30 CFR 56.16016 - Lift trucks.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Lift trucks. 56.16016 Section 56.16016 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND....16016 Lift trucks. Fork and other similar types of lift trucks shall be operated with the— (a) Upright...

30 CFR 57.16016 - Lift trucks.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Lift trucks. 57.16016 Section 57.16016 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... § 57.16016 Lift trucks. Fork and other similar types of lift trucks shall be operated with the: (a...

Alternative Fuels Data Center: Biodiesel Truck Transports Capitol Christmas

Science.gov Websites

Tree Biodiesel Truck Transports Capitol Christmas Tree to someone by E-mail Share Alternative Fuels Data Center: Biodiesel Truck Transports Capitol Christmas Tree on Facebook Tweet about Alternative Fuels Data Center: Biodiesel Truck Transports Capitol Christmas Tree on Twitter Bookmark Alternative

49 CFR 393.40 - Required brake systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... subpart. (2) Air brake systems. Buses, trucks and truck-tractors equipped with air brake systems and..., and 393.52 of this subpart. (4) Electric brake systems. Motor vehicles equipped with electric brake..., trucks and truck tractors manufactured on or after March 1, 1975, and trailers manufactured on or after...

29 CFR 1917.43 - Powered industrial trucks.

Code of Federal Regulations, 2012 CFR

2012-07-01

... safety. (5) Powered industrial trucks shall be marked with their rated capacities, which shall be visible.... (5) Powered industrial trucks shall be maintained in safe working order. Safety devices shall not be... 29 Labor 7 2012-07-01 2012-07-01 false Powered industrial trucks. 1917.43 Section 1917.43 Labor...

29 CFR 1917.43 - Powered industrial trucks.

Code of Federal Regulations, 2014 CFR

2014-07-01

... safety. (5) Powered industrial trucks shall be marked with their rated capacities, which shall be visible.... (5) Powered industrial trucks shall be maintained in safe working order. Safety devices shall not be... 29 Labor 7 2014-07-01 2014-07-01 false Powered industrial trucks. 1917.43 Section 1917.43 Labor...

7 CFR 58.317 - Bulk butter trucks, boats, texturizers, and packers.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 3 2013-01-01 2013-01-01 false Bulk butter trucks, boats, texturizers, and packers... and Grading Service 1 Equipment and Utensils § 58.317 Bulk butter trucks, boats, texturizers, and packers. Bulk butter trucks, boats, texturizers, and packers shall be constructed of aluminum, stainless...

7 CFR 58.317 - Bulk butter trucks, boats, texturizers, and packers.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 3 2014-01-01 2014-01-01 false Bulk butter trucks, boats, texturizers, and packers... and Grading Service 1 Equipment and Utensils § 58.317 Bulk butter trucks, boats, texturizers, and packers. Bulk butter trucks, boats, texturizers, and packers shall be constructed of aluminum, stainless...

7 CFR 58.317 - Bulk butter trucks, boats, texturizers, and packers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 3 2011-01-01 2011-01-01 false Bulk butter trucks, boats, texturizers, and packers... and Grading Service 1 Equipment and Utensils § 58.317 Bulk butter trucks, boats, texturizers, and packers. Bulk butter trucks, boats, texturizers, and packers shall be constructed of aluminum, stainless...

7 CFR 58.317 - Bulk butter trucks, boats, texturizers, and packers.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 3 2012-01-01 2012-01-01 false Bulk butter trucks, boats, texturizers, and packers... and Grading Service 1 Equipment and Utensils § 58.317 Bulk butter trucks, boats, texturizers, and packers. Bulk butter trucks, boats, texturizers, and packers shall be constructed of aluminum, stainless...

7 CFR 58.317 - Bulk butter trucks, boats, texturizers, and packers.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Bulk butter trucks, boats, texturizers, and packers... and Grading Service 1 Equipment and Utensils § 58.317 Bulk butter trucks, boats, texturizers, and packers. Bulk butter trucks, boats, texturizers, and packers shall be constructed of aluminum, stainless...

Measurement of Whole-Body Vibration Exposure from Garbage Trucks

NASA Astrophysics Data System (ADS)

Maeda, S.; Morioka, M.

1998-08-01

Japanese garbage truck drivers are exposed to mechanical whole-body vibration during their work. Some drivers have suffered from low back pain from this vibration. However, there is no evidence of a relationship between the whole-body vibration from the garbage trucks and low back pain or occupational disease, due to the lack of investigations. A field study was conducted in order to characterize the health risks associated with garbage truck work. Three different types of truck were tested at different loadings and on different road surfaces, with the vibrations measured at the driver/seat interface (x,y, andz-axes). The vibrations were compared with the health risk guidance according to Annex B of ISO 2631-1 [1]. The findings of this study indicated that Japanese garbage truck drivers should not operate trucks for 2.5 h in a day, under current working conditions.

Assessment of perceived injury risks and priorities among truck drivers and trucking companies in Washington State.

PubMed

Spielholz, Peregrin; Cullen, Jennifer; Smith, Caroline; Howard, Ninica; Silverstein, Barbara; Bonauto, David

2008-01-01

The trucking industry experiences one of the highest work-related injury rates. Little work has been conducted previously in the United States to assess the hazards, needs, and injury prevention priorities in trucking. Two separate industry-wide surveys of 359 trucking companies and 397 commercial truck drivers were conducted in Washington State. Trucking companies and drivers both ranked musculoskeletal and slip, trip, fall injuries as the top two priorities. Controlling heavy lifting, using appropriate equipment, and addressing slippery surfaces were frequently listed as solutions. There appears to be a gap in safety climate perception between workers and employers. However, driver and company priorities agreed with industry workers' compensation claims. There is room for safety program management improvement in the industry. The study findings detail opportunities for prioritizing and reducing injuries. This information can be used to focus and design interventions for the prevention of work-related injuries while improving industry competitiveness.

49 CFR 230.98 - Driving, trailing, and engine truck axles.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Driving, trailing, and engine truck axles. 230.98... Locomotives and Tenders Running Gear § 230.98 Driving, trailing, and engine truck axles. (a) Condemning defects. Driving, trailing, and engine truck axles with any of the following defects shall be removed from...

76 FR 55011 - Hand Trucks and Certain Parts Thereof From the People's Republic of China; Extension of Time...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-06

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-891] Hand Trucks and Certain... initiation of administrative review of the antidumping duty order on hand trucks and certain parts thereof... merchandise subject to this antidumping duty order consists of hand trucks manufactured from any material...

Diesel and Truck Certification Needs Assessment: Two Surveys.

ERIC Educational Resources Information Center

Broadbent, William A.

Recommendations for the improvement of the diesel engine and truck components of the Hawaii state certification examination for automobile and truck mechanics were solicited from 14 major private businesses repairing heavy tractor rigs and/or diesel engines on Oahu and a statewide sample of 21 trucking firms and other companies making extensive…

49 CFR 238.219 - Truck-to-car-body attachment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Truck-to-car-body attachment. 238.219 Section 238... I Passenger Equipment § 238.219 Truck-to-car-body attachment. Passenger equipment shall have a truck-to-car-body attachment with an ultimate strength sufficient to resist without failure the following...

49 CFR 238.219 - Truck-to-car-body attachment.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Truck-to-car-body attachment. 238.219 Section 238... I Passenger Equipment § 238.219 Truck-to-car-body attachment. Passenger equipment shall have a truck-to-car-body attachment with an ultimate strength sufficient to resist without failure the following...

49 CFR 238.219 - Truck-to-car-body attachment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Truck-to-car-body attachment. 238.219 Section 238... I Passenger Equipment § 238.219 Truck-to-car-body attachment. Passenger equipment shall have a truck-to-car-body attachment with an ultimate strength sufficient to resist without failure the following...

49 CFR 238.219 - Truck-to-car-body attachment.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Truck-to-car-body attachment. 238.219 Section 238... I Passenger Equipment § 238.219 Truck-to-car-body attachment. Passenger equipment shall have a truck-to-car-body attachment with an ultimate strength sufficient to resist without failure the following...

49 CFR 238.219 - Truck-to-car-body attachment.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Truck-to-car-body attachment. 238.219 Section 238... I Passenger Equipment § 238.219 Truck-to-car-body attachment. Passenger equipment shall have a truck-to-car-body attachment with an ultimate strength sufficient to resist without failure the following...

Alternative Fuels Data Center: Idaho Transports Mail and Reduces Emissions

Science.gov Websites

with Natural Gas Trucks Idaho Transports Mail and Reduces Emissions with Natural Gas Trucks to Natural Gas Trucks on Facebook Tweet about Alternative Fuels Data Center: Idaho Transports Mail and Reduces Emissions with Natural Gas Trucks on Twitter Bookmark Alternative Fuels Data Center: Idaho

49 CFR 230.98 - Driving, trailing, and engine truck axles.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Locomotives and Tenders Running Gear § 230.98 Driving, trailing, and engine truck axles. (a) Condemning defects. Driving, trailing, and engine truck axles with any of the following defects shall be removed from... 49 Transportation 4 2011-10-01 2011-10-01 false Driving, trailing, and engine truck axles. 230.98...

Integration and consolidation of border freight transportation data for planning applications and characterization of NAFTA truck loads for aiding in transportation infrastructure management : second year.

DOT National Transportation Integrated Search

2008-07-01

Average Daily Truck Traffic (ADTT) increased dramatically in Texas in the 1990s partly because of the : implementation of the North American Free Trade Agreement (NAFTA). Accurate information on truck : volumes and truck characteristics is critical t...

Estimating the supply and demand for commercial heavy truck parking on interstate highways : a case study of I-81 in Virginia.

DOT National Transportation Integrated Search

2002-01-01

The increasing number of trucks traveling on Virginia highways has led to a growing demand for public rest areas and private truck stops. This study developed a methodology to determine the supply and demand for commercial heavy truck parking using I...

29 CFR 779.371 - Some automobile, truck, and farm implement establishments may qualify for exemption under section...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Some automobile, truck, and farm implement establishments... OR SERVICES Exemptions for Certain Retail or Service Establishments Automobile, Truck, Farm Implement, Trailer, and Aircraft Sales and Services § 779.371 Some automobile, truck, and farm implement...

Miami-Dade County Hydraulic Hybrid Refuse Truck Testing | Transportation

Science.gov Websites

Research | NREL Miami-Dade County Hydraulic Hybrid Refuse Truck Evaluation Miami-Dade County Hydraulic Hybrid Refuse Truck Evaluation Photo of garbage truck with view of lake and city in background. As hydraulic hybrid refuse vehicles, with 29 more on order. Photo courtesy of Parker Hannifin NREL is

High efficiency trucks : new revenues, new jobs, and improved fuel economy in the medium and heavy truck fleet.

DOT National Transportation Integrated Search

2010-05-01

The move to high efficiency trucks can lead to new revenues and jobs for companies involved in the development and marketing of the technologies needed to make this transition. But in order for the medium and heavy truck industry to make this transit...

Occupational Fatalities Among Driver/Sales Workers and Truck Drivers in the United States, 2003–2008

PubMed Central

Chen, Guang X.; Amandus, Harlan E.; Wu, Nan

2015-01-01

Background This study provides a national profile of occupational fatalities among truck drivers and driver-sales workers. Methods Data from the 2003–2008 Census of Fatal Occupational Injuries were used. Cases were extracted specifically for occupational subcategories included in the Driver/Sales Workers and Truck Drivers occupational category: Driver/Sales Workers, Heavy and Tractor-Trailer Truck Drivers, and Light Truck or Delivery Services Drivers. Results In 2003–2008, the group Driver/Sales Workers and Truck Drivers had 5,568 occupational fatalities, representing 17% of all occupational fatalities in the United States. The majority of these fatalities were in the subgroup Heavy and Tractor-Trailer Truck Drivers (85%) and due to transportation incidents (80%). Older and male drivers had higher fatality rates than their counterparts. Conclusions Findings suggest a need for targeted interventions to reduce highway fatalities among heavy truck drivers. Better employment data are needed to separate the three occupational subcategories by worker characteristic and employment history for use in research and prevention efforts. PMID:24811905

Modeling mechanical restriction differences between car and heavy truck in two-lane cellular automata traffic flow model

NASA Astrophysics Data System (ADS)

Li, Xin; Li, Xingang; Xiao, Yao; Jia, Bin

2016-06-01

Real traffic is heterogeneous with car and truck. Due to mechanical restrictions, the car and the truck have different limited deceleration capabilities, which are important factors in safety driving. This paper extends the single lane safety driving (SD) model with limited deceleration capability to two-lane SD model, in which car-truck heterogeneous traffic is considered. A car has a larger limited deceleration capability while a heavy truck has a smaller limited deceleration capability as a result of loaded goods. Then the safety driving conditions are different as the types of the following and the leading vehicles vary. In order to eliminate the well-known plug in heterogeneous two-lane traffic, it is assumed that heavy truck has active deceleration behavior when the heavy truck perceives the forming plug. The lane-changing decisions are also determined by the safety driving conditions. The fundamental diagram, spatiotemporal diagram, and lane-changing frequency were investigated to show the effect of mechanical restriction on heterogeneous traffic flow. It was shown that there would be still three traffic phases in heterogeneous traffic condition; the active deceleration of the heavy truck could well eliminate the plug; the lane-changing frequency was low in synchronized flow; the flow and velocity would decrease as the proportion of heavy truck grows or the limited deceleration capability of heavy truck drops; and the flow could be improved with lane control measures.

Weather impacts on single-vehicle truck crash injury severity.

PubMed

Naik, Bhaven; Tung, Li-Wei; Zhao, Shanshan; Khattak, Aemal J

2016-09-01

The focus of this paper is on illustrating the feasibility of aggregating data from disparate sources to investigate the relationship between single-vehicle truck crash injury severity and detailed weather conditions. Specifically, this paper presents: (a) a methodology that combines detailed 15-min weather station data with crash and roadway data, and (b) an empirical investigation of the effects of weather on crash-related injury severities of single-vehicle truck crashes. Random parameters ordinal and multinomial regression models were used to investigate crash injury severity under different weather conditions, taking into account the individual unobserved heterogeneity. The adopted methodology allowed consideration of environmental, roadway, and climate-related variables in single-vehicle truck crash injury severity. Results showed that wind speed, rain, humidity, and air temperature were linked with single-vehicle truck crash injury severity. Greater recorded wind speed added to the severity of injuries in single-vehicle truck crashes in general. Rain and warmer air temperatures were linked to more severe crash injuries in single-vehicle truck crashes while higher levels of humidity were linked to less severe injuries. Random parameters ordered logit and multinomial logit, respectively, revealed some individual heterogeneity in the data and showed that integrating comprehensive weather data with crash data provided useful insights into factors associated with single-vehicle truck crash injury severity. The research provided a practical method that combined comprehensive 15-min weather station data with crash and roadway data, thereby providing useful insights into crash injury severity of single-vehicle trucks. Those insights are useful for future truck driver educational programs and for truck safety in different weather conditions. Copyright © 2016 Elsevier Ltd and National Safety Council. All rights reserved.

Analysis of work zone rear-end crash risk for different vehicle-following patterns.

PubMed

Weng, Jinxian; Meng, Qiang; Yan, Xuedong

2014-11-01

This study evaluates rear-end crash risk associated with work zone operations for four different vehicle-following patterns: car-car, car-truck, truck-car and truck-truck. The deceleration rate to avoid the crash (DRAC) is adopted to measure work zone rear-end crash risk. Results show that the car-truck following pattern has the largest rear-end crash risk, followed by truck-truck, truck-car and car-car patterns. This implies that it is more likely for a car which is following a truck to be involved in a rear-end crash accident. The statistical test results further confirm that rear-end crash risk is statistically different between any two of the four patterns. We therefore develop a rear-end crash risk model for each vehicle-following pattern in order to examine the relationship between rear-end crash risk and its influencing factors, including lane position, the heavy vehicle percentage, lane traffic flow and work intensity which can be characterized by the number of lane reductions, the number of workers and the amount of equipment at the work zone site. The model results show that, for each pattern, there will be a greater rear-end crash risk in the following situations: (i) heavy work intensity; (ii) the lane adjacent to work zone; (iii) a higher proportion of heavy vehicles and (iv) greater traffic flow. However, the effects of these factors on rear-end crash risk are found to vary according to the vehicle-following patterns. Compared with the car-car pattern, lane position has less effect on rear-end crash risk in the car-truck pattern. The effect of work intensity on rear-end crash risk is also reduced in the truck-car pattern. Copyright © 2014 Elsevier Ltd. All rights reserved.

Comparison of NOx emissions from China III and China IV in-use diesel trucks based on on-road measurements

NASA Astrophysics Data System (ADS)

Yao, Zhiliang; Wu, Bobo; Wu, Yunong; Cao, Xinyue; Jiang, Xi

2015-12-01

To mitigate NOx and other emissions from diesel vehicles, China I, China II, China III and China IV emissions standards for new vehicles have been implemented nationwide. However, recent on-road measurements using a portable emission measurement system (PEMS) have revealed no significant reductions in the NOx emissions factors of diesel trucks due to the change from China II emissions standards to the more stringent China III standards. Thus, it is important to understand the effect of the China IV emissions standard on NOx emissions. In this study, nine China III and nine China IV diesel trucks of three sizes (light-duty diesel trucks (LDDTs), medium-duty diesel trucks (MDDTs) and heavy-duty diesel trucks (HDDTs)) were tested on real roads in Beijing using a PEMS. Compared to the tested China III diesel trucks, the China IV diesel trucks showed significant reductions of the average NOx emissions factors in terms of both distance travelled and fuel consumption. However, the driving conditions had an important impact on the reduction. Under non-highway driving (NHD), several of the tested China IV diesel trucks experienced no reduction or an increase in NOx emissions compared to their China III counterparts. The NOx emissions factors of the 18 tested diesel trucks under NHD were on average 1.5-times greater than those under highway driving (HD), and the effects on NOx emissions removal from China III to China IV diesel trucks were greater under HD than under NHD. In addition, no significant reduction of NOx based on fuel consumption for China IV diesel trucks was observed for MDDTs and HDDTs compared to the test results for similar China II vehicles reported in a previous study. To reduce NOx emissions in China, additional control measures of vehicular NOx emissions should be formulated.

Waste Workers’ Exposure to Airborne Fungal and Bacterial Species in the Truck Cab and During Waste Collection

PubMed Central

Madsen, Anne Mette; Alwan, Taif; Ørberg, Anders; Uhrbrand, Katrine; Jørgensen, Marie Birk

2016-01-01

A large number of people work with garbage collection, and exposure to microorganisms is considered an occupational health problem. However, knowledge on microbial exposure at species level is limited. The aim of the study was to achieve knowledge on waste collectors’ exposure to airborne inhalable fungal and bacterial species during waste collection with focus on the transport of airborne microorganisms into the truck cab. Airborne microorganisms were collected with samplers mounted in the truck cab, on the workers’ clothes, and outdoors. Fungal and bacterial species were quantified and identified. The study showed that the workers were exposed to between 112 and 4.8×104 bacteria m−3 air and 326 and 4.6×104 fungi m−3 air. The personal exposures to bacteria and fungi were significantly higher than the concentrations measured in the truck cabs and in the outdoor references. On average, the fungal and bacterial concentrations in truck cabs were 111 and 7.7 times higher than outdoor reference measurements. In total, 23 fungal and 38 bacterial species were found and identified. Most fungal species belonged to the genus Penicillium and in total 11 Penicillium species were found. Identical fungal species were often found both in a personal sample and in the same person’s truck cab, but concentrations were on average 27 times higher in personal samples. Concentrations of fungal and bacterial species found only in the personal samples were lower than concentrations of species also found in truck cabs. Skin-related bacteria constituted a large fraction of bacterial isolates found in personal and truck cab samples. In total, six Staphylococcus species were found. In outdoor samples, no skin-related bacteria were found. On average, concentrations of bacterial species found both in the truck cab and personal samples were 77 times higher in personal samples than in truck cab samples. In conclusion, high concentrations of fungi were found in truck cabs, but the highest concentrations were found in personal samples; fungal and bacterial species found in high concentrations in personal samples were also found in truck cabs, but in lower concentrations indicating that both fungi and bacteria are transported by the workers into the truck cab, and are subsequently aerosolized in the truck cab. PMID:27098185

Potential benefits of underride guards in large truck side crashes.

PubMed

Brumbelow, Matthew L

2012-01-01

To evaluate the maximum potential for side underride guards (SUGs) to reduce passenger vehicle occupant fatalities and injuries in crashes with large trucks in the United States. Examination of the Large Truck Crash Causation Study (LTCCS) identified 206 crash events involving a passenger vehicle impact with the side of a large truck. Each case was evaluated to determine whether the most severe injury sustained by a passenger vehicle occupant was a result of the impact with the side of the truck and whether an SUG could have reduced the injury severity. Data from the 2006-2008 Fatality Analysis Reporting System (FARS) and Trucks Involved in Fatal Accidents (TIFA) survey were used to compare the types of trucks involved in all fatal side impacts with passenger vehicles with the truck types in the LTCCS cases that were studied. FARS and TIFA data also were used to estimate the total annual number of passenger vehicle occupants killed in truck side impacts. In 143 of the 206 cases, the truck side impact produced the most severe injury sustained by a passenger vehicle occupant. In the other cases, no passenger vehicle occupant was injured or the most severe injury was due to an event preceding or following the truck side impact. Forty-nine of these occupants sustained injuries coded as level 3 or higher on the abbreviated injury scale (AIS) or were killed. SUGs could have reduced injury severity in 76 of the 143 cases, including 38 of the 49 cases with an AIS ≥ 3 coded injury or fatality. Semi-trailers were the most common type of impacted truck unit, both overall and when considering only cases where an SUG could have mitigated injury severity. Crashes where the front of the passenger vehicle struck the side of the semi-trailer perpendicularly or obliquely from the oncoming direction were less common overall than side-to-side and oblique/same direction crashes but more often produced an AIS ≥ 3 injury or fatality. The distribution of truck types in the LTCCS sample was similar to that in the FARS and TIFA data. Overall, around 1600 passenger vehicle occupants were killed in 2-vehicle truck side impact crashes during 2006-2008, or 22 percent of all passenger vehicle occupants who died in 2-vehicle crashes with large trucks. Structural incompatibility was a common factor in LTCCS crashes between passenger vehicles and the sides of large trucks. SUGs could have reduced injury risk in around three fourths of the crashes that produced an AIS ≥ 3 injury or fatality. Most of these crashes involved semi-trailers. However, the necessary strength and location of these SUGs present technical challenges that need to be addressed.

Drayage Truckers Best Practices

EPA Pesticide Factsheets

Drayage truckers best practices include: replacing older trucks with newer cleaner trucks, avoiding idling, maintaining engines, retrofitting trucks with verified technologies, and operating during off-peak hours.

75 FR 76518 - Volvo Trucks North America and Mack Trucks, Inc., Receipt of Petition for Decision of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-08

... manufactured from March 1, 2007 through December 11, 2009. A total of 1,916 affected Volvo trucks were... trucks were manufactured from March 1, 2007, through December 11, 2009. A total 1,287 affected Mack... that their petition, to exempt them from providing recall notification of noncompliance as required by...

76 FR 36083 - Hand Trucks and Certain Parts Thereof From the People's Republic of China: Final Results and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-21

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-891] Hand Trucks and Certain... review of the antidumping duty order on hand trucks and certain parts thereof from the People's Republic of China (PRC). See Hand Trucks and Certain Parts Thereof from the People's Republic of China...

77 FR 41744 - Hand Trucks and Certain Parts Thereof From the People's Republic of China: Final Results of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-16

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-891] Hand Trucks and Certain... order on hand trucks and certain parts thereof from the People's Republic of China (PRC).\\1\\ Based upon...\\ See Hand Trucks and Certain Parts Thereof from the People's Republic of China: Preliminary Results of...

75 FR 29314 - Hand Trucks and Parts Thereof from the People's Republic of China: Final Results of Antidumping...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-25

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-891] Hand Trucks and Parts... preliminary results of administrative review of the antidumping duty order on hand trucks and certain parts... review of the antidumping duty order on hand trucks and certain parts thereof from the People's Republic...

Ralphs Grocery EC-Diesel Truck Fleet: Final Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2003-02-01

DOE's Office of Heavy Vehicle Technologies sponsored a research project with Ralphs Grocery Company to collect and analyze data on the performance and operation of 15 diesel trucks fueled with EC-Diesel in commercial service. These trucks were compared to 5 diesel trucks fueled with CARB diesel and operating on similar routes. This document reports this evaluation.

27 CFR 24.229 - Tank car and tank truck requirements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Tank car and tank truck... BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL WINE Spirits § 24.229 Tank car and tank truck requirements. Railroad tank cars and tank trucks used to transport spirits for use in wine production will be constructed...

27 CFR 24.229 - Tank car and tank truck requirements.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Tank car and tank truck... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Spirits § 24.229 Tank car and tank truck requirements. Railroad tank cars and tank trucks used to transport spirits for use in wine production will be constructed...

27 CFR 24.229 - Tank car and tank truck requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Tank car and tank truck... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Spirits § 24.229 Tank car and tank truck requirements. Railroad tank cars and tank trucks used to transport spirits for use in wine production will be constructed...

27 CFR 24.229 - Tank car and tank truck requirements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Tank car and tank truck... BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL WINE Spirits § 24.229 Tank car and tank truck requirements. Railroad tank cars and tank trucks used to transport spirits for use in wine production will be constructed...

27 CFR 24.229 - Tank car and tank truck requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Tank car and tank truck... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Spirits § 24.229 Tank car and tank truck requirements. Railroad tank cars and tank trucks used to transport spirits for use in wine production will be constructed...

Alternative Fuels Data Center: Virginia Cleans up With Natural Gas Refuse

Science.gov Websites

Trucks Virginia Cleans up With Natural Gas Refuse Trucks to someone by E-mail Share Alternative Fuels Data Center: Virginia Cleans up With Natural Gas Refuse Trucks on Facebook Tweet about Alternative Fuels Data Center: Virginia Cleans up With Natural Gas Refuse Trucks on Twitter Bookmark Alternative

Investigation of Truck Size and Weight Limits - Technical Supplement. Vol. 1. Analysis of Truck Payloads Under Various Limits of Size, Weight and Configuration

DOT National Transportation Integrated Search

1981-02-01

This volume documents the results of an analysis of the impact that various truck size and weight limits have on the carrier equipment selection process as a result of changes, in the design payload and design density of individual trucks. An analysi...

29 CFR 779.371 - Some automobile, truck, and farm implement establishments may qualify for exemption under section...

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Some automobile, truck, and farm implement establishments... OR SERVICES Exemptions for Certain Retail or Service Establishments Automobile, Truck and Farm Implement Sales and Services, and Trailer, Boat and Aircraft Sales § 779.371 Some automobile, truck, and...

29 CFR 779.371 - Some automobile, truck, and farm implement establishments may qualify for exemption under section...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Some automobile, truck, and farm implement establishments... OR SERVICES Exemptions for Certain Retail or Service Establishments Automobile, Truck and Farm Implement Sales and Services, and Trailer, Boat and Aircraft Sales § 779.371 Some automobile, truck, and...

29 CFR 779.371 - Some automobile, truck, and farm implement establishments may qualify for exemption under section...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Some automobile, truck, and farm implement establishments... OR SERVICES Exemptions for Certain Retail or Service Establishments Automobile, Truck and Farm Implement Sales and Services, and Trailer, Boat and Aircraft Sales § 779.371 Some automobile, truck, and...

29 CFR 779.371 - Some automobile, truck, and farm implement establishments may qualify for exemption under section...

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Some automobile, truck, and farm implement establishments... OR SERVICES Exemptions for Certain Retail or Service Establishments Automobile, Truck and Farm Implement Sales and Services, and Trailer, Boat and Aircraft Sales § 779.371 Some automobile, truck, and...

78 FR 24373 - Approval and Promulgation of Air Quality Implementation Plans; Wisconsin; Amendments to Vehicle...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-25

... cars and light trucks have been inspected by scanning the vehicle's computerized second generation on... technology (MY 1995 and earlier cars and light trucks and MY 2006 and earlier heavy trucks). III. What... light duty vehicles and trucks up to 8,500 pounds GVWR, and includes vehicles operating on all fuel...

Logging truck noise near nesting northern goshawks

Treesearch

Teryl G. Grubb; Larry L. Pater; David K. Delaney

1998-01-01

We measured noise levels of four logging trucks as the trucks passed within approximately 500 m of two active northern goshawk (Accipiter gentilis) nests on the Kaibab Plateau in northern Arizona in 1997. Neither a brooding adult female nor a lone juvenile exhibited any discernable behavioral response to logging truck noise, which peaked at 53.4 and...

77 FR 75257 - Proposed Collection of Information: Medium- and Heavy-Duty Truck Fleet Survey

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-19

...-0170] Proposed Collection of Information: Medium- and Heavy-Duty Truck Fleet Survey AGENCY: National... collection of information will be in the form of a one-time survey of medium- and heavy-duty truck fleet... collection. OMB Control Number: To be issued at time of approval. Title: Medium- and Heavy-Duty Truck Fleet...

9 CFR 71.6 - Carrier responsible for cleaning and disinfecting of railroad cars, trucks, boats, aircraft or...

Code of Federal Regulations, 2011 CFR

2011-01-01

... disinfecting of railroad cars, trucks, boats, aircraft or other means of conveyance. 71.6 Section 71.6 Animals... for cleaning and disinfecting of railroad cars, trucks, boats, aircraft or other means of conveyance. (a) Railroad cars, trucks, boats, aircraft, and other means of conveyance which have been used in the...

9 CFR 71.6 - Carrier responsible for cleaning and disinfecting of railroad cars, trucks, boats, aircraft or...

Code of Federal Regulations, 2012 CFR

2012-01-01

... disinfecting of railroad cars, trucks, boats, aircraft or other means of conveyance. 71.6 Section 71.6 Animals... for cleaning and disinfecting of railroad cars, trucks, boats, aircraft or other means of conveyance. (a) Railroad cars, trucks, boats, aircraft, and other means of conveyance which have been used in the...

9 CFR 71.6 - Carrier responsible for cleaning and disinfecting of railroad cars, trucks, boats, aircraft or...

Code of Federal Regulations, 2013 CFR

2013-01-01

... disinfecting of railroad cars, trucks, boats, aircraft or other means of conveyance. 71.6 Section 71.6 Animals... for cleaning and disinfecting of railroad cars, trucks, boats, aircraft or other means of conveyance. (a) Railroad cars, trucks, boats, aircraft, and other means of conveyance which have been used in the...

9 CFR 71.6 - Carrier responsible for cleaning and disinfecting of railroad cars, trucks, boats, aircraft or...

Code of Federal Regulations, 2010 CFR

2010-01-01

... disinfecting of railroad cars, trucks, boats, aircraft or other means of conveyance. 71.6 Section 71.6 Animals... for cleaning and disinfecting of railroad cars, trucks, boats, aircraft or other means of conveyance. (a) Railroad cars, trucks, boats, aircraft, and other means of conveyance which have been used in the...

9 CFR 71.6 - Carrier responsible for cleaning and disinfecting of railroad cars, trucks, boats, aircraft or...

Code of Federal Regulations, 2014 CFR

2014-01-01

... disinfecting of railroad cars, trucks, boats, aircraft or other means of conveyance. 71.6 Section 71.6 Animals... for cleaning and disinfecting of railroad cars, trucks, boats, aircraft or other means of conveyance. (a) Railroad cars, trucks, boats, aircraft, and other means of conveyance which have been used in the...

49 CFR 230.100 - Defects in tender truck axles and journals.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Defects in tender truck axles and journals. 230... Steam Locomotives and Tenders Running Gear § 230.100 Defects in tender truck axles and journals. (a... wheel seats that is more than 1/8 of an inch in depth. (b) Tender truck journal condemning defects...

Trends in the size distribution, highway use, and consumption of gasoline and diesel fuels of the U.S. Commercial Truck Fleet, 1977-2002.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bertram, K. M.; Santini, D. J.; Anderson, J. L.

2008-01-01

This paper focuses on various major long-range (1977-2002, 1982-2002) U.S. commercial trucking trends by using U.S. Department of Commerce, Bureau of the Census Vehicle/Truck Inventory and Use Survey (VIUS/TIUS) data from this period, as well as selected 1977-2002 data from the U.S. Department of Energy's (DOE's) Energy Information Administration (EIA) and the U.S. Department of Transportation, Federal Highway Administration's (FHWA's) Highway Statistics. Analyses are made of (1) overall passenger vehicle versus truck consumption patterns of gasoline and diesel fuel and (2) the population growth and fuels used by all commercial truck classes and selected truck types (single unit and combination).more » Selected vehicle miles traveled, gallons per vehicle miles traveled, and gallons per cargo ton-miles traveled trends, as well as the effect of cargo tons per truck on fuel consumption, are also assessed. In addition, long-range trends of related factors (such as long-haul mileages driven by heavy trucks) and their impacts on both reducing fuel consumption per cargo-ton-mile and the relative shares of total commercial fuel use among truck classes were examined. Results of these trends on U.S. petroleum consumption are identified. The effects of basic engineering design and performance, national Interstate highway construction legislation, national demographic trends (such as suburbanization), and changes in U.S. corporate operational requirements are discussed. Their impacts on both the long-distance hauling and shorter-distance urban and suburban delivery markets of the commercial trucking industry are highlighted.« less

75 FR 7426 - Tier 2 Light-Duty Vehicle and Light-Duty Truck Emission Standards and Gasoline Sulfur Control...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-19

... 2060-AI23; 2060-AQ12 Tier 2 Light-Duty Vehicle and Light-Duty Truck Emission Standards and Gasoline... February 10, 2000 (65 FR 6698), EPA published emission standards for light-duty vehicles and light-duty... new passenger cars and light trucks, including pickup trucks, vans, minivans, and sport-utility...

Alternative Fuels Data Center: How Do Natural Gas Class 8 Trucks Work?

Science.gov Websites

Natural Gas Class 8 Trucks Work? to someone by E-mail Share Alternative Fuels Data Center: How Do Natural Gas Class 8 Trucks Work? on Facebook Tweet about Alternative Fuels Data Center: How Do Natural Gas Class 8 Trucks Work? on Twitter Bookmark Alternative Fuels Data Center: How Do Natural Gas Class 8

27 CFR 27.174 - Tank cars and tank trucks to be sealed.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Tank cars and tank trucks... Tank cars and tank trucks to be sealed. Where a shipment of distilled spirits from customs custody to the distilled spirits plant is made in a tank car or tank truck, all openings affording access to the...

27 CFR 27.174 - Tank cars and tank trucks to be sealed.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Tank cars and tank trucks... Tank cars and tank trucks to be sealed. Where a shipment of distilled spirits from customs custody to the distilled spirits plant is made in a tank car or tank truck, all openings affording access to the...

27 CFR 27.174 - Tank cars and tank trucks to be sealed.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Tank cars and tank trucks... Tank cars and tank trucks to be sealed. Where a shipment of distilled spirits from customs custody to the distilled spirits plant is made in a tank car or tank truck, all openings affording access to the...

Alternative Fuels Data Center: Kentucky Trucking Company Adds CNG Vehicles

Science.gov Websites

run on compressed natural gas (CNG) in Lousiville, Kentucky. Download QuickTime Video QuickTime (.mov California Nov. 18, 2017 Photo of a car Smart Car Shopping Nov. 4, 2017 Photo of a truck Natural Gas Vehicles truck Idaho Transports Mail and Reduces Emissions with Natural Gas Trucks June 23, 2017 Photo of a

Alternative Fuels Data Center: How Do Liquefied Natural Gas Trucks Work?

Science.gov Websites

Liquefied Natural Gas Trucks Work? to someone by E-mail Share Alternative Fuels Data Center: How Do Liquefied Natural Gas Trucks Work? on Facebook Tweet about Alternative Fuels Data Center: How Do Liquefied Natural Gas Trucks Work? on Twitter Bookmark Alternative Fuels Data Center: How Do Liquefied Natural Gas

40 CFR 86.097-9 - Emission standards for 1997 and later model year light-duty trucks.

Code of Federal Regulations, 2013 CFR

2013-07-01

....097-9 Emission standards for 1997 and later model year light-duty trucks. (a)(1) Standards—(i) Light... standards. (ii) Heavy light-duty trucks. (A) Exhaust emissions from 1997 and later model year heavy light... model year light-duty trucks from compliance at low altitude with the emission standards set forth in...

Alternative Fuels Data Center: Truck Stop Electrification for Heavy-Duty

Science.gov Websites

-board equipment so trucks can plug into electrical outlets at the truck stop. To use dual-system electrification, trucks must be equipped with AC equipment or an inverter to convert 120-volt power, electrical equipment, and hardware to plug in to the electrical outlet. Necessary electrical equipment might include an

26 CFR 48.4061(a)-5 - Sale of automobile truck bodies and chassis.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 16 2011-04-01 2011-04-01 false Sale of automobile truck bodies and chassis. 48..., Tread Rubber, and Taxable Fuel Automotive and Related Items § 48.4061(a)-5 Sale of automobile truck bodies and chassis. (a) Sale of completed vehicle. An automobile truck (as defined by § 48.4061(a)-3(a...

26 CFR 48.4061(a)-5 - Sale of automobile truck bodies and chassis.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 16 2012-04-01 2012-04-01 false Sale of automobile truck bodies and chassis. 48..., Tread Rubber, and Taxable Fuel Automotive and Related Items § 48.4061(a)-5 Sale of automobile truck bodies and chassis. (a) Sale of completed vehicle. An automobile truck (as defined by § 48.4061(a)-3(a...

29 CFR 570.129 - Limited driving of automobiles and trucks by 17-year-olds.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Limited driving of automobiles and trucks by 17-year-olds... Amended Exemptions § 570.129 Limited driving of automobiles and trucks by 17-year-olds. Section 13(c)(6... employment, perform the occasional and incidental driving of automobiles and trucks on public highways under...

26 CFR 48.4061(a)-5 - Sale of automobile truck bodies and chassis.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 16 2013-04-01 2013-04-01 false Sale of automobile truck bodies and chassis. 48..., Tread Rubber, and Taxable Fuel Automotive and Related Items § 48.4061(a)-5 Sale of automobile truck bodies and chassis. (a) Sale of completed vehicle. An automobile truck (as defined by § 48.4061(a)-3(a...

29 CFR 570.129 - Limited driving of automobiles and trucks by 17-year-olds.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Limited driving of automobiles and trucks by 17-year-olds... Amended Exemptions § 570.129 Limited driving of automobiles and trucks by 17-year-olds. Section 13(c)(6... employment, perform the occasional and incidental driving of automobiles and trucks on public highways under...

26 CFR 48.4061(a)-5 - Sale of automobile truck bodies and chassis.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 16 2010-04-01 2010-04-01 true Sale of automobile truck bodies and chassis. 48..., Tread Rubber, and Taxable Fuel Automotive and Related Items § 48.4061(a)-5 Sale of automobile truck bodies and chassis. (a) Sale of completed vehicle. An automobile truck (as defined by § 48.4061(a)-3(a...

29 CFR 570.129 - Limited driving of automobiles and trucks by 17-year-olds.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Limited driving of automobiles and trucks by 17-year-olds... Amended Exemptions § 570.129 Limited driving of automobiles and trucks by 17-year-olds. Section 13(c)(6... employment, perform the occasional and incidental driving of automobiles and trucks on public highways under...

29 CFR 570.129 - Limited driving of automobiles and trucks by 17-year-olds.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Limited driving of automobiles and trucks by 17-year-olds... Amended Exemptions § 570.129 Limited driving of automobiles and trucks by 17-year-olds. Section 13(c)(6... employment, perform the occasional and incidental driving of automobiles and trucks on public highways under...

Health promotion in the trucking setting: Understanding Dutch truck drivers' road to healthy lifestyle changes.

PubMed

Boeijinga, Anniek; Hoeken, Hans; Sanders, José

2016-10-17

The working environment, the nature of the work, and the characteristics of truck drivers as a social group typically pose great challenges for the truck drivers' health and health promotion activities aiming to improve it. The purpose was to obtain a better understanding of (a) Dutch truck drivers' perceptions of health and lifestyle themes, and (b) the challenges they experience in their pursuit of a more healthy lifestyle, as a guiding framework for the development of health interventions targeting this occupational group. In this qualitative study, we conducted and analyzed 20 semi-structured interviews and seven cases of participant observations with Dutch truck drivers. Grounded theory was used to analyze the data. Our findings illustrate that Dutch truck drivers wish to improve their lifestyle but have unproductive associations with concepts of healthy living as well as a tendency to downplay their health risks. In addition, they experience barriers within their work and personal environment that prevent them from translating their intentions into actual lifestyle changes. Based on the insights derived from the interviews, we discuss recommendations for the development of more effective health promotion interventions for truck drivers.

Characteristics of particle number and mass emissions during heavy-duty diesel truck parked active DPF regeneration in an ambient air dilution tunnel

NASA Astrophysics Data System (ADS)

Yoon, Seungju; Quiros, David C.; Dwyer, Harry A.; Collins, John F.; Burnitzki, Mark; Chernich, Donald; Herner, Jorn D.

2015-12-01

Diesel particle number and mass emissions were measured during parked active regeneration of diesel particulate filters (DPF) in two heavy-duty diesel trucks: one equipped with a DPF and one equipped with a DPF + SCR (selective catalytic reduction), and compliant with the 2007 and 2010 emission standards, respectively. The emission measurements were conducted using an ambient air dilution tunnel. During parked active regeneration, particulate matter (PM) mass emissions measured from a 2007 technology truck were significantly higher than the emissions from a 2010 technology truck. Particle number emissions from both trucks were dominated by nucleation mode particles having a diameter less than 50 nm; nucleation mode particles were orders of magnitude higher than accumulation mode particles having a diameter greater than 50 nm. Accumulation mode particles contributed 77.8 %-95.8 % of the 2007 truck PM mass, but only 7.3 %-28.2 % of the 2010 truck PM mass.

Mixed Integer Programming Model and Incremental Optimization for Delivery and Storage Planning Using Truck Terminals

NASA Astrophysics Data System (ADS)

Sakakibara, Kazutoshi; Tian, Yajie; Nishikawa, Ikuko

We discuss the planning of transportation by trucks over a multi-day period. Each truck collects loads from suppliers and delivers them to assembly plants or a truck terminal. By exploiting the truck terminal as a temporal storage, we aim to increase the load ratio of each truck and to minimize the lead time for transportation. In this paper, we show a mixed integer programming model which represents each product explicitly, and discuss the decomposition of the problem into a problem of delivery and storage, and a problem of vehicle routing. Based on this model, we propose a relax-and-fix type heuristic in which decision variables are fixed one by one by mathematical programming techniques such as branch-and-bound methods.

History of the 4th Battalion, 37th Armored Regiment in Operation Desert Shield/Storm. Volume 2

DTIC Science & Technology

1992-04-15

model white Toyota truck pulled into the LOGPAC area. An Arab jumped out of the driver’s side of the vehicle and grabbed a five gallon can out of the...truck bed. He looked at SGT Stephen I. Lee, the D Co supply sergeant, and asked, "Gauss? Gauss?" The Toyota truck was parked one hundred meters away...from the Toyota truck and began to happily roll an empty fifty-five gallon drum off the truck. Seeing as how I did not suffer from the same hearing

41 CFR 50-210.1 - Coverage under the Walsh-Healey Public Contracts Act of truck drivers employed by oil dealers.

Code of Federal Regulations, 2010 CFR

2010-07-01

...-Healey Public Contracts Act of truck drivers employed by oil dealers. 50-210.1 Section 50-210.1 Public...-210.1 Coverage under the Walsh-Healey Public Contracts Act of truck drivers employed by oil dealers... Interpretations No. 2 1 with respect to coverage under the Walsh-Healey Public Contracts Act of truck drivers...

Effects of geometric characteristics of interchanges on truck safety

DOT National Transportation Integrated Search

1999-01-18

Relationships between truck accidents and selected geometric characteristics of interchanges are examined. Datasets containing information on truck accident at interchanges, traffic exposure and selected geometric characteristics are analyzed with an...

Comparison of life cycle greenhouse gases from natural gas pathways for medium and heavy-duty vehicles.

PubMed

Tong, Fan; Jaramillo, Paulina; Azevedo, Inês M L

2015-06-16

The low-cost and abundant supply of shale gas in the United States has increased the interest in using natural gas for transportation. We compare the life cycle greenhouse gas (GHG) emissions from different natural gas pathways for medium and heavy-duty vehicles (MHDVs). For Class 8 tractor-trailers and refuse trucks, none of the natural gas pathways provide emissions reductions per unit of freight-distance moved compared to diesel trucks. When compared to the petroleum-based fuels currently used in these vehicles, CNG and centrally produced LNG increase emissions by 0-3% and 2-13%, respectively, for Class 8 trucks. Battery electric vehicles (BEVs) powered with natural gas-produced electricity are the only fuel-technology combination that achieves emission reductions for Class 8 transit buses (31% reduction compared to the petroleum-fueled vehicles). For non-Class 8 trucks (pick-up trucks, parcel delivery trucks, and box trucks), BEVs reduce emissions significantly (31-40%) compared to their diesel or gasoline counterparts. CNG and propane achieve relatively smaller emissions reductions (0-6% and 19%, respectively, compared to the petroleum-based fuels), while other natural gas pathways increase emissions for non-Class 8 MHDVs. While using natural gas to fuel electric vehicles could achieve large emission reductions for medium-duty trucks, the results suggest there are no great opportunities to achieve large emission reductions for Class 8 trucks through natural gas pathways with current technologies. There are strategies to reduce the carbon footprint of using natural gas for MHDVs, ranging from increasing vehicle fuel efficiency, reducing life cycle methane leakage rate, to achieving the same payloads and cargo volumes as conventional diesel trucks.

Hennepin County`s experience with heavy-duty ethanol vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-01-01

From November 1993 to October 1996, Hennepin County, which includes Minneapolis, field-tested two heavy-duty snowplow/road maintenance trucks fueled by ethanol. The overall objective of this program was to collect data from original equipment manufacturer alternative fuel heavy-duty trucks, along with comparable data from a similarly configured diesel-powered vehicle, to establish economic, emissions, performance, and durability data for the alternative fuel technology. These ethanol trucks, along with an identical third truck equipped with a diesel engine, were operated year round to maintain the Hennepin county roads. In winter, the trucks were run in 8-hour shifts plowing and hauling snow from urbanmore » and suburban roads. For the rest of the year, the three trucks were used to repair and maintain these same roads. As a result of this project, a considerable amount of data was collected on E95 fuel use, as well as maintenance, repair, emissions, and operational characteristics. Maintenance and repair costs of the E95 trucks were considerably higher primarily due to fuel filter and fuel pump issues. From an emissions standpoint, the E95 trucks emitted less particulate matter and fewer oxides of nitrogen but more carbon monoxide and hydrocarbons. Overall, the E95 trucks operated as well as the diesel, as long as the fuel filters were changed frequently. This project was a success in that E95, a domestically produced fuel from a renewable energy source, was used in a heavy-duty truck application and performed the same rigorous tasks as the diesel counterparts. The drawbacks to E95 as a heavy-duty fuel take the form of higher operational costs, higher fuel costs, shorter range, and the lack of over-the-road infrastructure.« less

North Carolina forecasts for truck traffic

DOT National Transportation Integrated Search

2006-07-01

North Carolina has experienced significant increases in truck traffic on many of its highways. Yet, current NCDOT : project-level highway traffic forecasts do not appropriately capture anticipated truck traffic growth. NCDOT : methods forecast total ...

23 CFR 650.707 - Rating factor.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Average Daily Truck Traffic in thousands (Pick up trucks and light delivery trucks not included). For load... restricted. The ADTT should be the annual average volume, not peak or seasonal; (4) N is National Highway...

23 CFR 650.707 - Rating factor.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Average Daily Truck Traffic in thousands (Pick up trucks and light delivery trucks not included). For load... restricted. The ADTT should be the annual average volume, not peak or seasonal; (4) N is National Highway...

23 CFR 650.707 - Rating factor.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Average Daily Truck Traffic in thousands (Pick up trucks and light delivery trucks not included). For load... restricted. The ADTT should be the annual average volume, not peak or seasonal; (4) N is National Highway...

23 CFR 650.707 - Rating factor.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Average Daily Truck Traffic in thousands (Pick up trucks and light delivery trucks not included). For load... restricted. The ADTT should be the annual average volume, not peak or seasonal; (4) N is National Highway...

23 CFR 650.707 - Rating factor.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Average Daily Truck Traffic in thousands (Pick up trucks and light delivery trucks not included). For load... restricted. The ADTT should be the annual average volume, not peak or seasonal; (4) N is National Highway...

Large truck crash facts 2005

DOT National Transportation Integrated Search

2007-02-01

This annual edition of Large Truck Crash Facts contains descriptive statistics about fatal, injury, and property damage only crashes involving large trucks in 2005. Selected crash statistics on passenger vehicles are also presented for comparison pur...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grogin, Phillip W.

A powered industrial truck (PIT) is defined as a mobile, powerdriven vehicle used to carry, push, pull, lift, or stack material (not including vehicles intended primarily for earth moving). There are many types of and names for PITs, including forklifts, trucks, fork trucks, platform lift trucks, motorized hand trucks, and tractors. Although not every PIT is a forklift, because PITs are commonly called “forklifts,” this course manual generally uses the term “forklift,” although at times the terms “truck” and “PIT” are also used. In some areas of this course, you will see green boxes that refer to the Occupational Safetymore » and Health Administration (OSHA) regulation for PITs, which is 29 Code of Federal Regulations (CFR) 1910.178, Powered Industrial Trucks. The letter in the parentheses refers to the specific section of the regulation.« less

Occupational Hydrofluoric Acid Injury from Car and Truck Washing--Washington State, 2001-2013.

PubMed

Reeb-Whitaker, Carolyn K; Eckert, Carly M; Anderson, Naomi J; Bonauto, David K

2015-08-21

Exposure to hydrofluoric acid (HF) causes corrosive chemical burns and potentially fatal systemic toxicity. Car and truck wash cleaning products, rust removers, and aluminum brighteners often contain HF because it is efficient in breaking down roadway matter. The death of a truck wash worker from ingestion of an HF-based wash product and 48 occupational HF burn cases associated with car and truck washing in Washington State during 2001-2013 are summarized in this report. Among seven hospitalized workers, two required surgery, and all but one worker returned to the job. Among 48 injured workers, job titles were primarily auto detailer, car wash worker, truck wash worker, and truck driver. Because HF exposure can result in potentially severe health outcomes, efforts to identify less hazardous alternatives to HF-based industrial wash products are warranted.

Crash compatibility between cars and light trucks: benefits of lowering front-end energy-absorbing structure in SUVs and pickups.

PubMed

Baker, Bryan C; Nolan, Joseph M; O'Neill, Brian; Genetos, Alexander P

2008-01-01

Passenger vehicles are designed to absorb crash energy in frontal crashes through deformation or crush of energy-absorbing structures forward of the occupant compartment. In collisions between cars and light trucks (i.e., pickups and SUVs), however, the capacity of energy-absorption structures may not be fully utilized because mismatches often exist between the heights of these structures in the colliding vehicles. In 2003 automakers voluntarily committed to new design standards aimed at reducing the height mismatches between cars and light trucks. By September 2009 all new light trucks will have either the primary front structure (typically the frame rails) or a secondary structure connected to the primary structure low enough to interact with the primary structures in cars, which for most cars is about the height of the front bumper. To estimate the overall benefit of the voluntary commitment, the real-world crash experience of light trucks already meeting the height-matching criteria was compared with that of light trucks not meeting the criteria for 2000-2003 model light trucks in collisions with passenger cars during calendar years 2001-2004. The estimated benefits of lower front energy-absorbing structure were a 19 percent reduction (p<0.05) in fatality risk to belted car drivers in front-to-front crashes with light trucks and a 19 percent reduction (p<0.05) in fatality risk to car drivers in front-to-driver-side crashes with light trucks.

49 CFR 176.78 - Use of power-operated industrial trucks on board vessels.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Refueling. (1) A truck using gasoline as fuel may not be refueled in the hold or on the weather deck of a... truck using liquefied petroleum gas as fuel may not be refueled in the hold or on the weather deck of a... truck using diesel oil as fuel may not be refueled on the weather deck or in the hold of a vessel unless...

49 CFR 176.78 - Use of power-operated industrial trucks on board vessels.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) Refueling. (1) A truck using gasoline as fuel may not be refueled in the hold or on the weather deck of a... truck using liquefied petroleum gas as fuel may not be refueled in the hold or on the weather deck of a... truck using diesel oil as fuel may not be refueled on the weather deck or in the hold of a vessel unless...

Design and analysis of truck body for increasing the payload capacity

NASA Astrophysics Data System (ADS)

Vamshi Krishna, K.; Yugandhar Reddy, K.; Venugopal, K.; Ravi, K.

2017-11-01

Truck industry is a major source of transportation in India. With an average truck travelling about 300 kilometers per day [1], every kilogram of truck weight is of concern to the industry in order to get the best out of the truck. The main objective of this project is to increase the payload capacity of automotive truck body. Every kilogram of increased vehicle weight will decrease the vehicle payload capacity in turn increasing the manufacturing cost and reducing the fuel economy by increase the fuel consumption. With the intension of weight reduction, standard truck body has been designed and analyzed in ANSYS software. C-cross section beams were used instead of conventional rectangular box sections to reduce the weight of the body. Light-weight Aluminum alloy Al 6061 T6 is used to increase the payload capacity. The strength of the Truck platform is monitored in terms of deformation and stress concentration. These parameters will be obtained in structural analysis test condition environment. For reducing the stress concentration the concept of beams of uniform strength is used. Accordingly necessary modifications are done so that the optimized model has a better stress distribution and much lesser weight compared to the conventional model. The results obtained by analyzing the modified model are compared with the standard model.

Environmental Assessment: Explosive Ordnance Disposal Training Facility, Munitions Storage Facility, and Munitions Maintenance and Inspection Facility Westover Air Reserve Base, Massachusetts

DTIC Science & Technology

2003-08-01

laminate . The thickness of this unit ranges from 10 to more than 250 feet in the Westover ARB area. A glacial till layer of poorly sorted gravel, sand...trucks, concrete trucks, and flatbed trucks. The backhoe would be used with a percussion chisel as well as a lift bucket. Estimates were also...36.00 3.80 83.40 9.00 5.20 Concrete Truck 5 8 2 1.80 0.19 4.17 0.45 0.26 Emissions (lbs) 144.00 15.20 333.60 36.00 20.80 Flatbed Truck 10 8 1

Heavy truck casualty collisions, 1994-1998

DOT National Transportation Integrated Search

2001-12-01

This document reviews the number of collisions, vehicles involved, and casualties (fatalities and injuries) resulting from heavy truck collisions for each of straight trucks (greater than 4.536 kg) and tractor-trailers. The report also presents table...

Trucks involved in fatal accidents factbook 2007.

DOT National Transportation Integrated Search

2010-01-01

This document presents aggregate statistics on trucks involved in traffic accidents in 2007. The : statistics are derived from the Trucks Involved in Fatal Accidents (TIFA) file, compiled by the : University of Michigan Transportation Research Instit...

Trucks involved in fatal accidents factbook 2008.

DOT National Transportation Integrated Search

2011-03-01

This document presents aggregate statistics on trucks involved in traffic accidents in 2008. The : statistics are derived from the Trucks Involved in Fatal Accidents (TIFA) file, compiled by the : University of Michigan Transportation Research Instit...

Light Duty Truck Weight Reduction Evaluation

DOT National Transportation Integrated Search

1980-08-01

This contract covers the identification of Types, Makes and Models which constitute the Light Truck world fleet. The attributes which describe the critical functional aspects of trucks of this size are established and specifications to define the att...

Naturalistic Study of Truck Following Behavior

DOT National Transportation Integrated Search

2016-04-01

Volpe conducted the Naturalistic study of truck following behavior to gain a better understanding of how trucks follow other vehicles in the real world, with the ultimate goal of supporting the Federal Highway Administration in the development of aut...

Truck facility access design guidelines statewide.

DOT National Transportation Integrated Search

2011-06-01

The overall purpose of this project is to develop design guidelines for truck access to truck stop facilities adjoining interstate highways and accessed by interchanges in Louisiana. The specific objectives of the research are to: 1. Identify existin...

Stability and Curving Performance of Conventional and Advanced Rail Transit Vehicles

DOT National Transportation Integrated Search

1984-01-01

Analytical studies are presented which compare the curving performance and speed capability of conventional rail transit trucks with self steering (cross-braced) and forced steering (linkages between carbody and wheelsets) radial trucks. Truck curvin...

Costs of large truck- and bus-involved crashes.

DOT National Transportation Integrated Search

2000-12-01

This study provides comprehensive, economically sophisticated estimates of the costs of highway crashes involving large trucks and buses by severity. Based on the latest data available, the estimated cost of police-reported crashes involving trucks w...

Noise Control Handbook for Diesel-Powered Vehicles

DOT National Transportation Integrated Search

1975-05-01

The handbook has been prepared with the intention of assisting the truck fleet operator and the independent truck owner/operator in understanding and diagnosing noise problems and in selecting retrofittable components to lower truck exterior and inte...

Large truck and bus crash facts, 2010.

DOT National Transportation Integrated Search

2012-09-01

This annual edition of Large Truck and Bus Crash Facts contains descriptive statistics about fatal, injury, and : property damage only crashes involving large trucks and buses in 2010. Selected crash statistics on passenger : vehicles are also presen...

Large truck and bus crash facts, 2007.

DOT National Transportation Integrated Search

2009-03-01

This annual edition of Large Truck and Bus Crash Facts contains descriptive statistics about fatal, injury, and : property damage only crashes involving large trucks and buses in 2007. Selected crash statistics on passenger : vehicles are also presen...

Large truck and bus crash facts, 2008. 

DOT National Transportation Integrated Search

2010-03-01

This annual edition of Large Truck and Bus Crash Facts contains descriptive statistics about fatal, injury, and : property damage only crashes involving large trucks and buses in 2008. Selected crash statistics on passenger : vehicles are also presen...

Large truck and bus crash facts, 2011.

DOT National Transportation Integrated Search

2013-10-01

This annual edition of Large Truck and Bus Crash Facts contains descriptive statistics about fatal, injury, and : property damage only crashes involving large trucks and buses in 2011. Selected crash statistics on passenger : vehicles are also presen...

Large truck and bus crash facts, 2013.

DOT National Transportation Integrated Search

2015-04-01

This annual edition of Large Truck and Bus Crash Facts contains descriptive statistics about fatal, injury, and property damage only crashes involving large trucks and buses in 2013. Selected crash statistics on passenger vehicles are also presented ...

Large truck and bus crash facts, 2009.

DOT National Transportation Integrated Search

2011-10-01

This annual edition of Large Truck and Bus Crash Facts contains descriptive statistics about fatal, injury, and : property damage only crashes involving large trucks and buses in 2009. Selected crash statistics on passenger : vehicles are also presen...

Large truck and bus crash facts, 2012.

DOT National Transportation Integrated Search

2014-06-01

This annual edition of Large Truck and Bus Crash Facts contains descriptive statistics about fatal, injury, and property damage only crashes involving large trucks and buses in 2012. Selected crash statistics on passenger vehicles are also presented ...

State Route 60 automated truck facility.

DOT National Transportation Integrated Search

2008-01-01

A research was conducted to evaluate a dedicated automated truck lane along a case study route 60 (Pomona : Freeway) to accommodate higher truck volume using AHS technologies and to estimate the associated costs of : such technologies. A cost analysi...

Heavy truck rollover characterization (phase B).

DOT National Transportation Integrated Search

2009-09-01

The Heavy Truck Rollover Characterization Study - Phase-B builds on the results of prior phases of research. Phases 1 and 2 (Funded by Federal Highway Administration) involved heavy truck rollover characterization for a tractor and box-trailer; and P...

Fireproof Hydraulic Brake System.

DTIC Science & Technology

1985-10-01

MLBT elastomer personnel recommended the use of Firestone’s Phosphonitrilic Fluoroelastomer (PNF) for elastomeric O-rings in the CTFE fluid system. C.E...resealed with modified "PNF" (phosphonitrilic fluoroelastomer) elastomer Ŕ" rings. The hoses are PTFE lined for compatibility with the CTFE...Plus 65-42808-6 Nylon Braid )* AN837-8 Elbow (on Truck) 61-11536-1 Tube Assy (Strut/Truck Hose to Truck Tee)* 290 -7. 61-11530-1 Tube Assy (Truck Tee

Rule-based optimization and multicriteria decision support for packaging a truck chassis

NASA Astrophysics Data System (ADS)

Berger, Martin; Lindroth, Peter; Welke, Richard

2017-06-01

Trucks are highly individualized products where exchangeable parts are flexibly combined to suit different customer requirements, this leading to a great complexity in product development. Therefore, an optimization approach based on constraint programming is proposed for automatically packaging parts of a truck chassis by following packaging rules expressed as constraints. A multicriteria decision support system is developed where a database of truck layouts is computed, among which interactive navigation then can be performed. The work has been performed in cooperation with Volvo Group Trucks Technology (GTT), from which specific rules have been used. Several scenarios are described where the methods developed can be successfully applied and lead to less time-consuming manual work, fewer mistakes, and greater flexibility in configuring trucks. A numerical evaluation is also presented showing the efficiency and practical relevance of the methods, which are implemented in a software tool.

Effects of road transportation or droving on the weight and metabolism of young bulls.

PubMed

D'Oliveira, Marcella Cândia; Souza, Maria Inês Lenz; Corrêa Filho, Ruy Alberto Caetano; Morais, Maria da Graça; Itavo, Camila Celeste Brandão Ferreira; Franco, Gumercindo Loriano

2014-12-01

This study evaluated the effects of the mode of transportation on weight and metabolism of young bulls, which are generally transported by two systems: droving and truck. This experiment consisted of two phases: transportation and refeeding and involved transportation by droving and truck. Fifty young Nellore bulls were separated in equal numbers in both groups, droving group and truck group. In the transportation phase, animals were moved, in a 640-km journey. The refeeding phase consisted of 84 days and commenced after the animals arrived at the fattening farm. The effect of the transportation system on animals' weight, metabolic hormones, and serum biochemistry was assessed after 28, 56, and 84 days. During the transportation phase, animals in the droving group lost 10.11 kg and animals in the truck group gained 13.1 kg. The truck group showed 20.5 kg of weight gain at the end of the refeeding phase. The highest triiodothyronine (T3) and thyroxine (T4) concentrations were observed on days 0 and 60 in the transportation phase in both droving and truck groups. The serum cortisol concentration was higher in the droving group than in the truck group on day 56 of the refeeding phase. The IGF-I concentrations were higher during the refeeding phase in the droving group than in the truck group. Our results showed that transportation by droving leads to increased weight loss and reduced further weight gain compared to transportation by truck and that serum concentrations of T4, cortisol, and insulin-like growth factor (IGF-I) hormones are altered by the transportation system.

Effects of truck traffic on crash injury severity on rural highways in Wyoming using Bayesian binary logit models.

PubMed

Ahmed, Mohamed M; Franke, Rebecca; Ksaibati, Khaled; Shinstine, Debbie S

2018-08-01

Roadway safety is an integral part of a functioning infrastructure. A major use of the highway system is the transport of goods. The United States has experienced constant growth in the amount of freight transported by truck in the last few years. Wyoming is experiencing a large increase in truck traffic on its local and county roads due to an increase in oil and gas production. This study explores the involvement of heavy trucks in crashes and their significance as a predictor of crash severity and addresses the effect that large truck traffic is having on the safety of roadways for various road classifications. Studies have been done on the factors involved in and the causation of heavy truck crashes, but none address the causation and effect of roadway classifications on truck crashes. Binary Logit Models (BLM) with Bayesian inferences were utilized to classify heavy truck involvement in severe and non-severe crashes using ten years (2002-2011) of historical crash data in the State of Wyoming. From the final main effects model, various interactions proved to be significant in predicting the severity of crashes and varied depending on the roadway classification. The results indicated the odds of a severe crash increase to 2.3 and 4.5 times when a heavy truck is involved on state and interstate highways respectively. The severity of crashes is significantly increased when road conditions were not clear, icy, and during snowy weather conditions. Copyright © 2018 Elsevier Ltd. All rights reserved.

Commercial truck parking and other safety issues.

DOT National Transportation Integrated Search

2015-10-01

Commercial truck parking is a safety issue, since trucks are involved in approximately 10% of all fatal accidents on interstates and : parkways in Kentucky. Drivers experience schedule demands and long hours on the road, yet they cannot easily determ...

Estimation and analysis of multifactor productivity in truck transportation : 1987 - 2003

DOT National Transportation Integrated Search

2009-02-01

The analysis has three objectives: 1) to estimate multifactor : productivity (MFP) in truck transportation during : 1987-2003; 2) to examine changes in multifactor productivity : in U.S. truck transportation, over time, and : to compare these changes...

Truck Terminal and Warehouse Survey Results

DOT National Transportation Integrated Search

1996-03-01

The survey of truck terminals and warehouses resulted in locating the highway bottlenecks for truck movements which are more localized in nature than the previous air, marine, and rail surveys performed by the NYMTC Central Staff. However, all of the...

Highway reservation system design and its application to freight transportation.

DOT National Transportation Integrated Search

2014-05-01

Congestion and safety associated with freight trucks are key issues that arise in the context of highway : transportation, especially in the heavily-traveled commercial corridors. To address these issues, truck-only lanes for freight trucks have been...

Identification of methods for truck crash reduction

DOT National Transportation Integrated Search

1999-10-01

In South Dakota, trucks account for a higher percentage of fatalities than other vehicles, indicating when National transit database truck is involved in a crash, fatalities are more likely to occur. In this study, the Business Research Bureau review...

Vehicle-to-vehicle communications in mixed passenger-freight convoys : [research brief].

DOT National Transportation Integrated Search

2016-09-01

Freight traffic in California depends, to a large degree, on trucks, due to their flexibility in : visiting warehouses, distribution centers, and terminals. However, trucks pose major challenges : to traffic and road safety. Accidents involving truck...

Mitigating Wind Induced Truck Crashes

DOT National Transportation Integrated Search

2009-12-25

Dangerous weather and high wind in particular, is a common contributing factor in truck crashes. High wind speeds have been documented as a perennial cause of truck crashes in Kansas and other Great Plains states. The possibility of reducing such cra...

Stage 2 tool user’s manual.

DOT National Transportation Integrated Search

2017-08-01

The purpose of the Permitted Overweight Truck Corridor Analysis Tool (referred to in this document as the Stage 2 Tool) is to evaluate existing or to create new proposed overweight (OW) truck corridors to estimate the permitted OW truck, pavement, br...

Commercial truck parking detection technology evaluation for Columbia County rest areas.

DOT National Transportation Integrated Search

2016-11-01

Rest areas along Floridas interstate routes are heavily utilized by commercial trucks for overnight parking. : Many of the rest areas regularly experience 100% utilization of the commercial truck parking spaces : during the evening and early morni...

Engineering Data on Selected High Speed Passenger Trucks

DOT National Transportation Integrated Search

1978-07-01

The purpose of this project is to compile a list of high speed truck engineering parameters for characterization in dynamic performance modeling activities. Data tabulations are supplied for trucks from France, Germany, Italy, England, Japan, U.S.S.R...

Truck side guard technical overview : safety and operational considerations

DOT National Transportation Integrated Search

2015-04-23

This technical overview provides safety and operational considerations for truck side guards. Truck side guards are designed to keep pedestrians, bicyclists, and motorcyclists - known as vulnerable road users (VRUs) from being run over by a large tru...

Making truck-rail intermodal more competitive.

DOT National Transportation Integrated Search

2010-09-01

Truck-rail intermodal freight is a technique that can gain much of the benefit of truck service and rail efficiency. Despite the attraction of the mode : choice and its benefit in reducing emissions and highway congestion, the mode typically is used ...

Papers on vehicle size : cars and trucks

DOT National Transportation Integrated Search

1988-06-01

The four papers in this volume describe analyses of car size : trends and truck occupant injuries and fatalities. All four were : written between June 1985 and December 1987. The topics : addressed include where heavy truck accidents occur, injury an...

Real Driving NOx Emissions of European Trucks and Detection of Manipulated Emission Systems

NASA Astrophysics Data System (ADS)

Pöhler, Denis; Adler, Tim; Krufczik, Chsristopher; Horbanski, Martin; Lampel, Johannes; Platt, Ulrich

2017-04-01

Nitrogen dioxide (NO2) is the most problematic pollutant in Europe and many other countries. NO2 has a negative impact for the health and the environment, and in most European cities the currently allowed mean annual limit of 40μg/m3 is exceeded. Vehicles, especially Diesel, are the most relevant source. They emit NOx (NO + NO2), and NO can also be converted to NO2 in the atmosphere. Thus vehicle NOx emissions are regulated in the EU with the EURO Norm Standard (e.g. EURO 6 since 1.1.2013 for trucks with 400mg/kWh). Trucks achieve these low emissions with complex emission after treatment systems. All EURO 6 trucks and almost all EURO 5 trucks use the SCR system consuming AdBlue to reduce the NOx emissions. Since the diesel emission scandal for cars, it is well known that real driving emissions (RDE) can be several times higher that the EURO Norm Standard. The main problem is that RDE are only randomly investigated. Here we present a study of NOx RDE of more than 250 randomly chosen trucks on German highways. The measurements were performed with a newly developed mobile NOx-ICAD + CO2 -instrument applying the plume chasing measurement principle, where the pollutants are investigated in the emission plume and were converted to emission factors to be compared to the EURO standard. For most trucks the brand, the model name, the country of registration and its EURO class could be determined and used in a statistical analysis. The observed NOx emission data show that typical truck RDE are in the range of the expected EURO Norm or slightly higher. However, almost every fourth truck from Eastern Europe show emissions much higher that the EURO Norm. This was not observed for German trucks. As the emissions increase up to a factor of 5 to 10 these view trucks contribute significantly to the air pollution. These high emissions clearly indicate a defect emission treatment system. Most likely it indicates illegal manipulated emissions systems where the AdBlue injection is blocked (AdBlue emulator) to save money. This study shows that our measurement system can effectively investigate these manipulated vehicles. Further results and consequences of NOx RDE from trucks are presented.

Increasing the technical level of mining haul trucks

NASA Astrophysics Data System (ADS)

Voronov, Yuri; Voronov, Artyom; Grishin, Sergey; Bujankin, Alexey

2017-11-01

Theoretical and methodological fundamentals of mining haul trucks optimal design are articulated. Methods based on the systems approach to integrated assessment of truck technical level and methods for optimization of truck parameters depending on performance standards are provided. The results of using these methods are given. The developed method allows not only assessing the truck technical levels but also choosing the most promising models and providing quantitative evaluations of the decisions to be made at the design stage. These areas are closely connected with the problem of improvement in the industrial output quality, which, being a part of the widely spread in Western world "total quality control" ideology, is one of the major issues for the Russian economy.

The effect of the descent technique and truck cabin layout on the landing impact forces.

PubMed

Patenaude, S; Marchand, D; Samperi, S; Bélanger, M

2001-12-01

The majority of injuries to truckers are caused by falls during the descent from the cab of the truck. Several studies have shown that the techniques used to descend from the truck and the layout of the truck's cabin are the principal cause of injury. The goal of the present study was to measure the effects of the descent techniques used by the trucker and the layout of the truck's cabin on the impact forces absorbed by the lower limbs and the back. Kinematic data, obtained with the aid of a video camera, were combined with the force platform data to allow for calculation of the lower limb and L5-S1 torques as well as L5-S1 compressive forces. The trucker descended from two different conventional tractor cabin layouts. Each trucker descended from cabin using either "facing the truck" (FT) or "back to the truck" (BT) techniques. The results demonstrate that the BT technique produces greater ground impact forces than the FT technique, particularly when the truck does not have a handrail. The BT technique also causes an increase in the compressive forces exerted on the back. In conclusion, the use of the FT technique along with the aids (i.e., handrails and all the steps) help lower the landing impact forces as well as the lumbosacral compressive forces.

Truck Drivers' Use of the Internet: A Mobile Health Lifeline.

PubMed

Heaton, Karen; Combs, Bryan; Griffin, Russell

2017-06-01

Because of their social isolation, irregular and unpredictable schedules, limited access to health care, and long periods of travel, long-haul truckers may benefit from the use of mobile health applications on Internet-capable devices. The purpose of this study was to determine Internet access and usage among a sample of long-haul truck drivers. In this cross-sectional study, truck drivers completed a pencil and paper survey with questions on demographics, work and health histories, and Internet access and usage for both personal and job reasons. A total of 106 truck drivers were recruited from trucking industry trade shows, by word of mouth, and directly from trucking companies. Overall, the truck drivers' use of the Internet was limited. Their usage for personal and job-related reasons differed. Social connectivity and access to health and wellness information were important during personal usage time. Job-related Internet use was highly practical, and applied to seeking information for directions and maps, fuel stops and pricing, and communicating with employers or transmitting documents. Age and experience were associated with Internet use. Younger, less-experienced drivers used the Internet more than older, experienced drivers. Targeted mobile health messaging may be a useful tool to inform truck drivers of health conditions and plans, and may provide links to primary care providers needing to monitor or notify drivers of diagnostic results or treatment plans.

Comparing Gravimetric and Real-Time Sampling of PM2.5 Concentrations Inside Truck Cabins

PubMed Central

Zhu, Ying; Smith, Thomas J.; Davis, Mary E.; Levy, Jonathan I.; Herrick, Robert; Jiang, Hongyu

2012-01-01

As part of a study on truck drivers’ exposure and health risk, pickup and delivery (P&D) truck drivers’ on-road exposure patterns to PM2.5 were assessed in five weeklong sampling trips in metropolitan areas of five U.S. cities from April to August of 2006. Drivers were sampled with real-time (DustTrak) and gravimetric samplers to measure average in-cabin PM2.5 concentrations and to compare their correspondence in moving trucks. In addition, GPS measurements of truck locations, meteorological data, and driver behavioral data were collected throughout the day to determine which factors influence the relationship between real-time and gravimetric samplers. Results indicate that the association between average real-time and gravimetric PM2.5 measurements on moving trucks was fairly consistent (Spearman rank correlation of 0.63), with DustTrak measurements exceeding gravimetric measurements by approximately a factor of 2. This ratio differed significantly only between the industrial Midwest cities and the other three sampled cities scattered in the South and West. There was also limited evidence of an effect of truck age. Filter samples collected concurrently with DustTrak measurements can be used to calibrate average mass concentration responses for the DustTrak, allowing for real-time measurements to be integrated into longer-term studies of inter-city and intra-urban exposure patterns for truck drivers. PMID:21991940

Comparing gravimetric and real-time sampling of PM(2.5) concentrations inside truck cabins.

PubMed

Zhu, Ying; Smith, Thomas J; Davis, Mary E; Levy, Jonathan I; Herrick, Robert; Jiang, Hongyu

2011-11-01

As part of a study on truck drivers' exposure and health risk, pickup and delivery (P&D) truck drivers' on-road exposure patterns to PM(2.5) were assessed in five, weeklong sampling trips in metropolitan areas of five U.S. cities from April to August of 2006. Drivers were sampled with real-time (DustTrak) and gravimetric samplers to measure average in-cabin PM(2.5) concentrations and to compare their correspondence in moving trucks. In addition, GPS measurements of truck locations, meteorological data, and driver behavioral data were collected throughout the day to determine which factors influence the relationship between real-time and gravimetric samplers. Results indicate that the association between average real-time and gravimetric PM(2.5) measurements on moving trucks was fairly consistent (Spearman rank correlation of 0.63), with DustTrak measurements exceeding gravimetric measurements by approximately a factor of 2. This ratio differed significantly only between the industrial Midwest cities and the other three sampled cities scattered in the South and West. There was also limited evidence of an effect of truck age. Filter samples collected concurrently with DustTrak measurements can be used to calibrate average mass concentration responses for the DustTrak, allowing for real-time measurements to be integrated into longer-term studies of inter-city and intra-urban exposure patterns for truck drivers.

Truck crash severity in New York city: An investigation of the spatial and the time of day effects.

PubMed

Zou, Wei; Wang, Xiaokun; Zhang, Dapeng

2017-02-01

This paper investigates the differences between single-vehicle and multi-vehicle truck crashes in New York City. The random parameter models take into account the time of day effect, the heterogeneous truck weight effect and other influencing factors such as crash characteristics, driver and vehicle characteristics, built environment factors and traffic volume attributes. Based on the results from the co-location quotient analysis, a spatial generalized ordered probit model is further developed to investigate the potential spatial dependency among single-vehicle truck crashes. The sample is drawn from the state maintained incident data, the publicly available Smart Location Data, and the BEST Practices Model (BPM) data from 2008 to 2012. The result shows that there exists a substantial difference between factors influencing single-vehicle and multi-vehicle truck crash severity. It also suggests that heterogeneity does exist in the truck weight, and it behaves differently in single-vehicle and multi-vehicle truck crashes. Furthermore, individual truck crashes are proved to be spatially dependent events for both single and multi-vehicle crashes. Last but not least, significant time of day effects were found for PM and night time slots, crashes that occurred in the afternoons and at nights were less severe in single-vehicle crashes, but more severe in multi-vehicle crashes. Copyright © 2016. Published by Elsevier Ltd.

Trusted Truck(R) II (phase A).

DOT National Transportation Integrated Search

2009-01-01

The Trusted Truck Program was initiated in 2003 as a joint effort by NTRCI, Volvo and UT. The vision of the Trusted Truck program is to develop a secure and "trusted" transport solution from pickup to delivery. The program's objective is to incre...

Geometric design and operational factors that impact truck use of toll roads.

DOT National Transportation Integrated Search

2010-09-01

This purpose of this project was to identify the potential factors that could impact truck use of toll roads or : managed lanes. The researchers outlined the trucking and freight industry needs through synthesis of : existing literature. Identificati...

Truck Transportation of Hazardous Materials - A National Overview

DOT National Transportation Integrated Search

1987-12-01

The primary objective of the effort has been to provide Government regulators and policy-makers with (a) an estimate of the aggregate national volume of hazardous chemical and petroleum products transportation in trucks, (b) a profile of the truck fl...

Trucks involved in fatal accidents codebook 2008.

DOT National Transportation Integrated Search

2011-01-01

This report provides documentation for UMTRIs file of Trucks Involved in Fatal Accidents : (TIFA), 2008, including distributions of the code values for each variable in the file. The 2008 : TIFA file is a census of all medium and heavy trucks invo...

Energy Use and Other Comparisons Between Diesel and Gasoline Trucks

DOT National Transportation Integrated Search

1977-02-01

This report presents fuel consumption and other data on comparable diesel and gasoline trucks. The data was compiled from actual, operational records of the Maine Department of Transportation for trucks of about 24,000 pounds gross vehicle weight and...

Quantifying the impact of large percent trucks proportion on rural freeways.

DOT National Transportation Integrated Search

2014-02-01

The trucking industry continues to contribute significantly to the economy of the United States. : The surface transportation system has been a critical component for the movement of goods and : services by the trucking industry across the country. R...

Unit costs of medium and heavy truck crashes.

DOT National Transportation Integrated Search

2008-03-01

This study provides the latest estimates of unit costs for highway crashes involving medium/heavy trucks by severity. Based on the latest data available, the estimated cost of police-reported crashes involving trucks with a gross weight rating of mor...

Carbon Monoxide Poisoning

MedlinePlus

... How can I avoid CO poisoning from my car or truck? Have a mechanic check the exhaust system of your car or truck every year. A small leak in ... to a build up of CO inside the car. Never run your car or truck inside a ...

Evaluation of large-truck fixed-object crashes at bridge structures in Kansas.

DOT National Transportation Integrated Search

2012-12-01

The aim of this study was to investigate any possible relationships between roadway geometry, pavement conditions, and : large-truck, fixed object crashes at bridge sites. Data on single-vehicle and multiple-vehicle large-truck crashes were : extract...

Methodologies for reducing truck turn time at marine container terminals.

DOT National Transportation Integrated Search

2005-05-01

One of the prominent issues container terminal operators in the US are seeking to address is how to effectively : reduce truck turn time. Historically, truck turn time has received very little attention from terminal operators because port : congesti...

Commercial truck parking detection technology evaluation for Columbia County rest areas [summary].

DOT National Transportation Integrated Search

2016-12-01

Rest areas along Floridas interstate highways are heavily used by commercial trucks for overnight parking. Many rest areas regularly experience 100% utilization of the commercial truck parking spaces during the evening and early morning hours. Dri...

Truck stop and rest area parking study : final report

DOT National Transportation Integrated Search

2001-04-01

Crowding and illegal parking of trucks at existing public rest areas and along the highway ramps and shoulders has been recognized as a growing concern, with potential safety implications. In Connecticut there are approximately 1,200 trucks that trav...

76 FR 22154 - Powered Industrial Trucks Standard; Extension of the Office of Management and Budget's (OMB...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-20

... the knowledge, training, and experience to train operators and to evaluate their performance, and... severe injury or death of truck operators and other employees who are in the vicinity of the trucks...

The avoidance of weigh stations in Virginia by overweight trucks.

DOT National Transportation Integrated Search

1992-01-01

The primary objective of this research was to examine the avoidance of weigh stations in Virginia by overweight trucks. Secondary objectives were (1) to determine the magnitude of overweight truck activity on selected routes and (2) to compare traffi...

LANL Debuts Hybrid Garbage Truck

ScienceCinema

Witt, Monica

2018-01-16

Los Alamos National Laboratory has begun using a diesel-hydraulic hybrid garbage truck that could save up to 30 percent in operating costs and greenhouse emissions. The Peterbilt Model 320 takes energy from braking and uses it to help the truck accelerate after stops.

Investigation of the impact of large trucks on interstate highway safety.

DOT National Transportation Integrated Search

2002-02-01

This study concentrated on the impact of large trucks on interstate highway safety. The objectives of this study were to investigate the impact of trucks on interstate travel and offer recommendations for improving safety. The procedure involved revi...

Truck size and weight enforcement technologies : state of the practice

DOT National Transportation Integrated Search

2009-05-01

This report is a deliverable of Task 2 of FHWAs Truck Size and Weight Enforcement Technology Project. The primary project objective was to recommend strategies to encourage the deployment of roadside technologies to improve truck size and weight e...

A needs assessment and technology evaluation for roadside identification of commercial vehicles.

DOT National Transportation Integrated Search

1999-06-01

With the limited resources and increasingly heavy truck volumes, roadside enforcement officers must continually make decision which trucks to check and which to allow to proceed. This process of selecting some trucks for closer scrutiny, while allowi...

Behavioral distinctions : the use of light-duty trucks and passenger cars

DOT National Transportation Integrated Search

2000-12-01

Pickup trucks, sport utility vehicles (SUVs), and minivans are classified as light duty trucks (LDTs) in the United States, resulting in a variety of regulatory protections. According to production and purchase trends, Americans have shifted toward a...

Idling Reduction for Long-Haul Trucks: An Economic Comparison of On-Board and Wayside Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gaines, Linda; Weikersheimer, Patricia

Reducing the idling of long-haul heavy-duty trucks has long been recognized as a particularly low-hanging fruit of fuel efficiency and emissions reduction. The displacement of about 10 hours of diesel idling every day, for most days of the year, for as many as a million long-haul trucks has very clear benefits. This report considers the costs and return on investment (ROI) for idling reduction (IR) equipment for both truck owners and electrified parking space (EPS) equipment owners. For the truck owners, the key variables examined are idling hours to be displaced (generally 1,000 to 2,000 hours per year) and themore » price of fuel ($0 to $5/gal). The ideal IR option would provide complete services in varied climates in any location and offer the best ROI on trucks that log many idling hours. For trucks that have fewer idling hours, options with a fixed cost per hour (i.e., EPS) might be most attractive if they were available to all, or even most, truck drivers. EPS, however, is particularly cost effective for trucks on prescribed routes with a need for regular, extended stops at terminals. (EPS is also called truck stop electrification, or TSE.) The analysis shows that all IR options save money when fuel costs more than $2/gal. For trucks requiring bunk heat, a simple heater (plug-in or diesel) is almost always the most costeffective way to provide heat, even if the truck is equipped with an auxiliary power unit (APU) or is parked at a single-system EPS location. For trucks requiring bunk air-conditioning, the use of single-system EPS is most cost effective for those logging fewer idling hours. Even for trucks with higher idling hours, the cost of EPS may be about the same as that for on-board air-conditioning. Clearly, trucks’ locations and seasonal factors—and the availability of EPS— are significant in the choice of “best fit” IR equipment for truck owners. This report also considers costs and payback for owners of EPS infrastructure. An industry that 5 years ago had at least five players has been narrowed to two companies—one in single-system EPS (IdleAir) and the other in dual-system EPS (Shorepower Technologies). Use of EPS by truck drivers has not met initial expectations for a variety of reasons. One area where EPS has particular promise, however, is in the cost-effective provision of reliable air-conditioning. This analysis is focused strictly on cost and fuel savings; it does not consider the important benefits of reduced emissions (i.e., greenhouse gases and criteria pollutants). It is important to note that all IR options provide some emissions benefits. Even where an IR option may not have a rapid ROI, the emissions-reduction benefit may be considerable. Finally, as the U.S. Environmental Protection Agency (EPA) and the U.S. Department of Transportation’s National Highway Traffic Safety Administration (NHTSA) set stricter standards to reduce greenhouse gas emissions and improve the fuel efficiency of medium- and heavy-duty vehicles, the emissions benefits of IR strategies will become increasingly important.« less

Whole-body vibration exposure of haul truck drivers at a surface coal mine.

PubMed

Wolfgang, Rebecca; Burgess-Limerick, Robin

2014-11-01

Haul truck drivers at surface mines are exposed to whole-body vibration for extended periods. Thirty-two whole-body vibration measurements were gathered from haul trucks under a range of normal operating conditions. Measurements taken from 30 of the 32 trucks fell within the health guidance caution zone defined by ISO2631-1 for an 8 h daily exposure suggesting, according to ISO2631-1, that "caution with respect to potential health risks is indicated". Maintained roadways were associated with substantially lower vibration amplitudes. Larger trucks were associated with lower vibration levels than small trucks. The descriptive nature of the research, and small sample size, prevents any strong conclusion regarding causal links. Further investigation of the variables associated with elevated vibration levels is justified. The operators of mining equipment such as haul trucks are exposed to whole-body vibration amplitudes which have potential to lead to long term health effects. Systematic whole-body vibration measurements taken at frequent intervals are required to provide an understanding of the causes of elevated vibration levels and hence determine appropriate control measures. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

A Qualitative Study of Migrant-related Stressors, Psychosocial Outcomes and HIV Risk Behavior among Truck Drivers in Zambia

PubMed Central

Ncube, Nomagugu; Simona, Simona J.; Kansankala, Brian; Sinkala, Emmanuel; Raidoo, Jasmin

2017-01-01

Truck drivers are part of mobile populations which have been noted as a key population at risk of HIV in Zambia. This study was aimed at 1) determining Potentially Traumatic Events (PTEs), labor migrant-related stressors, psychosocial problems and HIV risk behaviors among truck drivers in Zambia and 2) examining the relationship between PTEs, migrant-related stressors, psychosocial outcomes and HIV sexual risk behavior among truck drivers in Zambia. We conducted fifteen semi-structured interviews with purposively sampled male truck drivers at trucking companies in Lusaka, Zambia. Findings indicate that truck drivers experience multiple stressors and potentially traumatic incidences, including delays and long waiting hours at borders, exposure to crime and violence, poverty, stress related to resisting temptation of sexual interactions with sex workers or migrant women, and job-related safety concerns. Multiple psychosocial problems such as intimate partner violence, loneliness, anxiety and depression-like symptoms were noted. Transactional sex, coupled with inconsistent condom use were identified as HIV sexual risk behaviors. Findings suggest the critical need to develop HIV prevention interventions which account for mobility, potentially traumatic events, psychosocial problems, and the extreme fear of HIV testing among this key population. PMID:27681145

Using truck fleet data in combination with other data sources for freight modeling and planning.

DOT National Transportation Integrated Search

2014-07-01

This project investigated the use of large streams of truck GPS data available from the American Transportation : Research Institute (ATRI) for the following statewide freight modeling and planning applications in Florida: : (1) Average truck speed d...

California heavy duty truck travel survey on selected sites.

DOT National Transportation Integrated Search

2001-12-01

The overall goal of the Heavy Duty Truck Travel (HDT) Survey was to collect representative truck travel data for selected sites in California. An integral aspect of the project was a literature search and inventory study of freight data survey collec...

Intelligent Transportation Systems, Building The ITI - Putting The National Architecture Into Action

DOT National Transportation Integrated Search

1998-09-01

This National Truck Crash Profile contains descriptive statistics about fatal and non-fatal (injury and property-damage-only) large truck crashes that occurred in 1997. The profile includes only some of the major aspects of truck crashes. Additional ...

Investigation of factors associated with truck crash severity in Nebraska.

DOT National Transportation Integrated Search

2012-06-01

The severity of truck crashes is a concern in the state of Nebraska. This study was undertaken to investigate factors : associated with the severity of truck crashes. A two-year dataset obtained from the Nebraska Department of Roads : (NDOR) was anal...

Detection technology for IVHS, Volume I : final report

DOT National Transportation Integrated Search

1996-10-01

This report, as part of the U.S. Department of Transportation (DOT) Comprehensive Truck Size and Weight (TS&W) Study, provides factual information and analysis of the U.S. freight hauling truck fleet, and is based on the Truck Inventory and Use Surve...

Commercial truck platooning - level 2 automation : project summary.

DOT National Transportation Integrated Search

2016-08-31

Besides driver compensation, the largest : operating expense for a line-haul truck is the : cost of fuel. At 65 mph, each truck expends about : 65 percent of its fuel consumption to overcome : the effects of aerodynamic drag. Many of the : large and ...

40 CFR 86.1870-12 - CO2 credits for qualifying full-size pickup trucks.

Code of Federal Regulations, 2013 CFR

2013-07-01

... broadcast battery pack voltage via an on-board diagnostics parameter ID channel. (1) Full size pickup trucks... conditioning leakage and/or efficiency credits as determined in §§ 86.1867 and 6.1868. Pickup trucks earning...

Productivity Trends in Intercity Trucking

ERIC Educational Resources Information Center

Carnes, Richard B.

1974-01-01

Productivity trends indicate intercity trucking productivity increased an average 2.7 percent a year, a fairly uniform increased productivity rate but substantially lower as compared to air carrier, railroad, and pipeline transportation. Factors affecting productivity are gradual introduction of technological innovation, larger capacity trucks,…

49 CFR 533.4 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... or use of fuel injection), and catalyst usage. Limited product line light truck means a light truck..., DEPARTMENT OF TRANSPORTATION LIGHT TRUCK FUEL ECONOMY STANDARDS § 533.4 Definitions. (a) Statutory terms. (1) The terms average fuel economy, average fuel economy standard, fuel economy, import, manufacture...

49 CFR 533.4 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... or use of fuel injection), and catalyst usage. Limited product line light truck means a light truck..., DEPARTMENT OF TRANSPORTATION LIGHT TRUCK FUEL ECONOMY STANDARDS § 533.4 Definitions. (a) Statutory terms. (1) The terms average fuel economy, average fuel economy standard, fuel economy, import, manufacture...

Revised costs of large truck-and bus-involved crashes.

DOT National Transportation Integrated Search

2002-11-01

This study provides the latest estimates of the costs of highway crashes involving large trucks and buses by severity. Based on the latest data available, the estimated cost of police-reported crashes involving trucks with a gross weight rating of mo...

Intelligent transportation systems field operational test cross-cutting study : commercial vehicle administrative processes

DOT National Transportation Integrated Search

1999-10-01

This analysis brief explores differences and similarities among the national crash experience of combination-unit trucks (CUTs), single-unit trucks (SUTs), and "all vehicles" (principally cars and light truck/vans). These CUT vs. SUT vs. all vehicle ...

Maximizing port and transportation system productivity by exploring alternative port operation strategies.

DOT National Transportation Integrated Search

2011-06-01

Seaports are a critical transportation component that supports the nations economy. Many U.S. : ports are now experiencing significant truck congestion at the gate, which decreases the productivity of : ports and truck fleets (e.g. truck wait time...

Adult Competency Education Kit. Basic Skills in Speaking, Math, and Reading for Employment. Part Q. ACE Competency Based Job Descriptions: #91--Meat Cutter; #92--Shipping Clerk; #93--Long Haul Truck Driver; #94--Truck Driver--Light.

ERIC Educational Resources Information Center

San Mateo County Office of Education, Redwood City, CA. Career Preparation Centers.

This fourteenth of fifteen sets of Adult Competency Education (ACE) Based Job Descriptions in the ACE kit contains job descriptions for Meat Cutter, Shipping Clerk, Long Haul Truck Driver, and Truck Driver--Light. Each begins with a fact sheet that includes this information: occupational title, D.O.T. code, ACE number, career ladder, D.O.T.…

Particle damping applied research on mining dump truck vibration control

NASA Astrophysics Data System (ADS)

Song, Liming; Xiao, Wangqiang; Guo, Haiquan; Yang, Zhe; Li, Zeguang

2018-05-01

Vehicle vibration characteristics has become an important evaluation indexes of mining dump truck. In this paper, based on particle damping technology, mining dump truck vibration control was studied by combining the theoretical simulation with actual testing, particle damping technology was successfully used in mining dump truck cab vibration control. Through testing results analysis, with a particle damper, cab vibration was reduced obviously, the methods and basis were provided for vehicle vibration control research and particle damping technology application.

Alternative-fueled truck demonstration natural gas program: Caterpillar G3406LE development and demonstration

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

In 1990, the California Energy Commission, the South Coast Air Quality Management District, and the Southern California Gas Company joined together to sponsor the development and demonstration of compressed natural gas engines for Class 8 heavy-duty line-haul trucking applications. This program became part of an overall Alternative-Fueled Truck Demonstration Program, with the goal of advancing the technological development of alternative-fueled engines. The demonstration showed natural gas to be a technically viable fuel for Class 8 truck engines.

Track-train dynamic analysis and test program, truck static test

NASA Technical Reports Server (NTRS)

Nemes, A. G.

1974-01-01

A series of tests were conducted to define the characteristics of an ASF 11 Ride Truck Assembly including joint slop, friction and stiffness. Loading to the truck assembly included vertical load to simulate the car/pool loading combined with lateral or moment loading that resulted in desired truck deflections for the various phases of testing. All seven test conditions were successfully completed with load and deflection data being collected. No attempt is made to reduce the applicable data other than to provide computer plots.

Work related injuries in Washington State's Trucking Industry, by industry sector and occupation.

PubMed

Smith, Caroline K; Williams, Jena

2014-04-01

The trucking industry continues to have some of the highest work-related injury and illness rates and costs of any industry in the United States. Until recently, little focus has been placed on addressing non-motor vehicle collision related injuries within the trucking industry. Drivers are exposed to multiple physical risk factors that contribute to occupational injuries in order to complete their job duties, such as loading/unloading freight, decoupling trailers, strapping down loads and ingress and egress from the cab and trailer. About one-fourth of all truck driver injuries in the United States are related to slips, trips, and falls near the truck. The purpose of this descriptive study is to report on recent injuries in the trucking industry in Washington State. Data are presented by occupation and industry sector, in order to better understand the magnitude of specific injuries in terms of time-loss days and workers' compensation costs. All accepted, compensable (time-loss) claims from 2005 to 2010 within the trucking industry in Washington State were reviewed. Counts, rates, median and quartile data are presented. Logistic regression models are presented to identify factors associated with more severe claims. Non-traumatic musculoskeletal disorders of the neck, back and upper extremities are the most frequent injuries across all industry sectors and occupations in the trucking industry. Vehicle related claims had the highest median costs and time loss days and Courier and Messenger claims had the highest risk for higher time loss claims. Injuries varied substantially by sector and within sectors by occupation. It is important to review work-related injuries within the trucking industry by sector and occupation in order to maximize limited resources for injury prevention within this important sector. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Crash risk factors for interstate large trucks in North Carolina.

PubMed

Teoh, Eric R; Carter, Daniel L; Smith, Sarah; McCartt, Anne T

2017-09-01

Provide an updated examination of risk factors for large truck involvements in crashes resulting in injury or death. A matched case-control study was conducted in North Carolina of large trucks operated by interstate carriers. Cases were defined as trucks involved in crashes resulting in fatal or non-fatal injury, and one control truck was matched on the basis of location, weekday, time of day, and truck type. The matched-pair odds ratio provided an estimate of the effect of various driver, vehicle, or carrier factors. Out-of-service (OOS) brake violations tripled the risk of crashing; any OOS vehicle defect increased crash risk by 362%. Higher historical crash rates (fatal, injury, or all crashes) of the carrier were associated with increased risk of crashing. Operating on a short-haul exemption increased crash risk by 383%. Antilock braking systems reduced crash risk by 65%. All of these results were statistically significant at the 95% confidence level. Other safety technologies also showed estimated benefits, although not statistically significant. With the exception of the finding that short-haul exemption is associated with increased crash risk, results largely bolster what is currently known about large truck crash risk and reinforce current enforcement practices. Results also suggest vehicle safety technologies can be important in lowering crash risk. This means that as safety technology continues to penetrate the fleet, whether from voluntary usage or government mandates, reductions in large truck crashes may be achieved. Practical application: Results imply that increased enforcement and use of crash avoidance technologies can improve the large truck crash problem. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

The causes and control of loader- and truck-related fatalities in surface mining operations.

PubMed

Kecojevic, Vladislav; Radomsky, Mark

2004-12-01

At surface mining operations throughout the world, loaders and trucks are a primary means of material loading and haulage. As the size, use and technological complexity of these units have increased, so has the concern regarding loader and truck safety. The severity and number of accidents involving loaders and trucks is higher when compared to all other mining accident types. In this paper, an analysis of loader and truck-related fatalities over the last 8 years is performed, the fatality categories and causes of accidents are established and control strategies are discussed and evaluated in an effort to increase hazard awareness by emphasizing safe loading, hauling and maintenance practices, as well as the value of traditional and innovative miner training programmes.

Improvement of Efficiency of Transportation in Harbor Physical Distribution Considering Inland Carriage

NASA Astrophysics Data System (ADS)

Hino, Hisato; Hoshino, Satoshi; Fujisawa, Tomoharu; Maruyama, Shigehisa; Ota, Jun

Currently, container ships move cargo with minimal participation from external trucks. However, there is slack time between the departure of container ships and the completion of cargo handling by container ships without the participation of external trucks; therefore, external trucks can be used to move cargo without delaying the departure time. In this paper, we propose a solution involving the control algorithms of transfer cranes (TCs) because the efficiency of yard operations depends largely on the productivity of TCs. TCs work according to heuristic rules using the forecasted arrival times of internal and external trucks. Simulation results show that the proposed method can reduce the waiting time of external trucks and meet the departure time of container ships.

Traffic and geometric characteristics affecting the involvement of large trucks in accidents.

DOT National Transportation Integrated Search

1991-01-01

Recent trends indicate that vehicle miles traveled for large trucks is increasing at a higher rate than for other vehicles. The resulting competition between large trucks and other vehicles for highway space can be expected to result in more multi-ve...

Trucks involved in fatal accidents codebook 2004 (Version March 23, 2007).

DOT National Transportation Integrated Search

2007-03-01

"This report provides documentation for UMTRIs file of Trucks Involved in Fatal Accidents (TIFA), : 2004, including distributions of the code values for each variable in the file. The 2004 TIFA file is : a census of all medium and heavy trucks inv...

Evaluation of large truck crashes at horizontal curves on two-lane rural highways in Kansas.

DOT National Transportation Integrated Search

2012-08-01

The objective of this study was to investigate the relationship between roadway and environment-related factors and truck : crash severity at horizontal curves located on rural, two-lane state highways in Kansas. Single vehicle truck crashes and : mu...

Characteristics and Contributory Causes Related to Large Truck Crashes (Phase I) - Fatal Crashes

DOT National Transportation Integrated Search

2010-06-01

One-ninth of all traffic fatalities in the United States have involved large trucks in the past five years, although large trucks contributed to only 3% of registered vehicles and 7% of vehicle miles travelled. This contrasting proportion indicates t...

Truck Route Choice Modeling using Large Streams of GPS Data

DOT National Transportation Integrated Search

2017-07-31

The primary goal of this research was to use large streams of truck-GPS data to analyze travel routes (or paths) chosen by freight trucks to travel between different origin and destination (OD) location pairs in metropolitan regions of Florida. Two s...

Weight Reduction Potential of Automobiles and Light Trucks: 1980 Summary Source Document

DOT National Transportation Integrated Search

1981-06-01

This report provides an assessment of the potential of weight reduction for passenger cars and light trucks (including pickup trucks, vans, and utility vehicles of GVWR up to 8500 pounds) in the post-1985 period. Vehicle characteristics and weight re...

Estimation of seatbelt and frontal-airbag effectiveness in trucks : U.S. and Chinese perspectives.

DOT National Transportation Integrated Search

2013-01-01

The objectives of this study were (1) to estimate the effectiveness of seatbelts and driver : airbags for mitigating medium- and heavy-truck driver injuries, and (2) to discuss the : implication of these estimates with respect to truck-driving condit...

Estimating statewide truck trips using commodity flows and input-output coefficients

DOT National Transportation Integrated Search

2000-04-01

This study uses commodity flows from the 1993 Commodity Flow Survey (CFS) together with Input-Output (I-O) coefficients to generate truck : flows for the state of Wisconsin. Production and attraction rates in tons, for the heavy truck mode only, were...

Statistical analysis of heavy truck loads using Wisconsin weigh-in-motion data

DOT National Transportation Integrated Search

2009-09-01

This study involved statistical evaluation of heavy truck loads that were recorded in 2007 using Weigh-In-Motion : stations located throughout the State of Wisconsin. The heaviest 5% of all trucks in each class and axle groupings were : selected for ...

40 CFR 600.501-93 - General applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Year 1978 Passenger Automobiles and for 1979 and Later Model Year Automobiles (Light Trucks and Passenger Automobiles)-Procedures for Determining Manufacturer's Average Fuel Economy § 600.501-93 General... automobiles and light trucks, and to the manufacturers of passenger automobiles and light trucks as determined...

Trucks involved in fatal accidents codebook 2010 (Version October 22, 2012).

DOT National Transportation Integrated Search

2012-11-01

This report provides documentation for UMTRIs file of Trucks Involved in Fatal Accidents : (TIFA), 2010, including distributions of the code values for each variable in the file. The 2010 : TIFA file is a census of all medium and heavy trucks invo...

Trucking and Size and Weight Regulations in the Mid-Continent Corridor

DOT National Transportation Integrated Search

1996-11-01

This thesis is an empirical analysis of trucking and truck size and weight (TS&W) regulations in the Mid-continent corridor. Based on this analysis, it compares and contrasts plausible near term TS&W policy options relating to this corridor. The appr...

Washington State freight truck origin and destination study : methods, procedures, and data dictionary

DOT National Transportation Integrated Search

1994-12-01

The Washington State Department of Transportation (WSDOT)initiated a state-wide freight truck origin and destination study in April of 1993. A region-wide freight truck origin and destination study was first proposed in Washington as an element of th...

Truck Travel Surveys: A Review of the Literature and State-of-the-Art

DOT National Transportation Integrated Search

1995-01-01

This paper presents the literature on conducting truck travel surveys in the U.S. and abroad. It includes past experiences, as well as current practices in : conducting truck surveys. The primary purpose of this paper is to present : compiled informa...

The impact of truck repositioning on congestion and pollution in the LA basin.

DOT National Transportation Integrated Search

2011-03-01

Pollution and congestion caused by port related truck traffic is usually estimated based on careful transportation modeling and simulation. In these efforts, however, attention is normally focused on trucks on their way from a terminal at the Los Ang...

Field and modeling framework and case study of truck weigh station operations

DOT National Transportation Integrated Search

2002-01-01

Weigh-in-Motion (WIM) systems improve the capacity of weigh station operations significantly by screening trucks while traveling at high speeds and only requiring trucks within a threshold of a maximum permissible gross of axle weight to be weighed o...

An investigation of site effeects on roadside measurement of truck noise

DOT National Transportation Integrated Search

1977-01-31

Multi-microphone measurements of the passby noise emissions from three dedicated multi-axle trucks and from transient trucking were made at nine highway sites and one standard (SAE-J366b) measuring site. Measurements were made in and around Fort Wayn...

Investigation of the gas-jet ejector in KamAZ trucks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shkret, L.Y.; Berezea, A.I.; Lobkov, A.N.

1984-03-01

This article considers the possibility of using gas-jet vacuum pumps in tank trucks for transporting liquids (water) at drilling sites. The discharge system of the KamAZ trucks can be reliably sealed by an engine brake, an important prerequisite of reliable operation of a gas-jet ejector that is switched on when the tank is being filled. The ejector consists of a housing, a Laval nozzle, a front wall with cylindrical neck, a tin-plate diffuser, an air supply pipe, and a flange for attaching the ejector to the flange of the exhaust muffler of the truck. The gas-jet ejectors are driven bymore » the exhaust gas (EG) of the trucks. The dependences of the EG flow rate, fuel expenditure, EG temperature ahead of the ejector, and the rotational frequency of the engine crankshaft on the diameter at different EG pressures. It is recommended that gas-jet ejectors be used on series produced tank trucks instead of rotary vacuum pumps with mechanical drive.« less

Real -time dispatching modelling for trucks with different capacities in open pit mines / Modelowanie w czasie rzeczywistym przewozów ciężarówek o różnej ładowności w kopalni odkrywkowej

NASA Astrophysics Data System (ADS)

Ahangaran, Daryoush Kaveh; Yasrebi, Amir Bijan; Wetherelt, Andy; Foster, Patrick

2012-10-01

Application of fully automated systems for truck dispatching plays a major role in decreasing the transportation costs which often represent the majority of costs spent on open pit mining. Consequently, the application of a truck dispatching system has become fundamentally important in most of the world's open pit mines. Recent experiences indicate that by decreasing a truck's travelling time and the associated waiting time of its associated shovel then due to the application of a truck dispatching system the rate of production will be considerably improved. Computer-based truck dispatching systems using algorithms, advanced and accurate software are examples of these innovations. Developing an algorithm of a computer- based program appropriated to a specific mine's conditions is considered as one of the most important activities in connection with computer-based dispatching in open pit mines. In this paper the changing trend of programming and dispatching control algorithms and automation conditions will be discussed. Furthermore, since the transportation fleet of most mines use trucks with different capacities, innovative methods, operational optimisation techniques and the best possible methods for developing the required algorithm for real-time dispatching are selected by conducting research on mathematical-based planning methods. Finally, a real-time dispatching model compatible with the requirement of trucks with different capacities is developed by using two techniques of flow networks and integer programming.

Comparative Study of Hybrid Powertrains on Fuel Saving, Emissions, and Component Energy Loss in HD Trucks

DOE PAGES

Gao, Zhiming; Finney, Charles; Daw, Charles; ...

2014-09-30

We compared parallel and series hybrid powertrains on fuel economy, component energy loss, and emissions control in Class 8 trucks over both city and highway driving. A comprehensive set of component models describing battery energy, engine fuel efficiency, emissions control, and power demand interactions for heavy duty (HD) hybrids has been integrated with parallel and series hybrid Class 8 trucks in order to identify the technical barriers of these hybrid powertrain technologies. The results show that series hybrid is absolutely negative for fuel economy benefit of long-haul trucks due to an efficiency penalty associated with the dual-step conversions of energymore » (i.e. mechanical to electric to mechanical). The current parallel hybrid technology combined with 50% auxiliary load reduction could elevate 5-7% fuel economy of long-haul trucks, but a profound improvement of long-haul truck fuel economy requires additional innovative technologies for reducing aerodynamic drag and rolling resistance losses. The simulated emissions control indicates that hybrid trucks reduce more CO and HC emissions than conventional trucks. The simulated results further indicate that the catalyzed DPF played an important role in CO oxidations. Limited NH 3 emissions could be slipped from the Urea SCR, but the average NH 3 emissions are below 20 ppm. Meanwhile our estimations show 1.5-1.9% of equivalent fuel-cost penalty due to urea consumption in the simulated SCR cases.« less

Analysis Of Technology Options To Reduce The Fuel Consumption Of Idling Trucks

DOT National Transportation Integrated Search

2000-06-01

Long-haul trucks idling overnight consume more than 838 million gallons (20 million barrels) of fuel annually. Idling also emits pollutants. Truck drivers idle their engines primarily to (1) heat or cool the cab and/or sleeper, (2) keep the fuel warm...

The application of smart phone, weight-mile truck data to support freight-modeling, performance measures and planning.

DOT National Transportation Integrated Search

2013-08-01

Oregon is one of the few states that currently charge a commercial truck weight-mile tax (WMT). The Oregon Department of : Transportation (ODOT) has developed a data-collection system Truck Road Use Electronics (TRUE) to simplify WMT : collec...

Traffic and geometric characteristics affecting the involvement of large trucks in accidents : interim report.

DOT National Transportation Integrated Search

1989-07-01

Recent trends indicate that vehicle miles traveled for large trucks is increasing at a higher rate than for other vehicles. The resulting competition between large trucks and other vehicles for highway space can be expected to result in more multi-ve...

Monitoring load distribution and fatigue cost estimates of heavy truck loads on Louisiana state bridges : tech summary.

DOT National Transportation Integrated Search

2013-11-01

TEA 21 (Transportation Equity Act 21) of 1998 allows heavy sugarcane truck loads on Louisiana interstate highways. These heavier loads are currently being : applied to state and parish roads through trucks traveling from and to the processing plants....

76 FR 59166 - Navistar Truck Development and Technology Center, a Subsidiary of Navistar International...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-23

... Development and Technology Center, a Subsidiary of Navistar International Corporation Truck Division, Fort... International Corporation, Truck Division, Fort Wayne, Indiana (subject firm). The negative determination was... is a headcount reduction across the nation, made possible by the Global Outsourcing. * * * '' The...

HEAVY-DUTY GREENHOUSE GAS EMISSIONS MODEL (GEM)

EPA Science Inventory

Class 2b-8 vocational truck manufacturers and Class 7/8 tractor manufacturers would be subject to vehicle-based fuel economy and emission standards that would use a truck simulation model to evaluate the impact of the truck tires and/or tractor cab design on vehicle compliance wi...

77 FR 32013 - Truck Size and Weight; Technical Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-31

...-2012-0037] RIN 2125-AF45 Truck Size and Weight; Technical Correction AGENCY: Federal Highway...: This rule makes a technical correction to the regulations that govern Longer Combination Vehicles (LCV... INFORMATION CONTACT: John Nicholas, Truck Size and Weight Program Manager, Office of Freight Management and...

Overview of drug and alcohol use among large truck and bus drivers, 2011–13.

DOT National Transportation Integrated Search

2016-12-01

This report provides a broad overview of drug and alcohol usage among large truck and bus drivers for 201113. Data sources for the overview are: testing results from motor carrier drug testing programs, roadside inspections on large trucks and bus...

75 FR 56651 - ITS Joint Program Office; Trucking Industry Mobility & Technology Coalition Annual Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-16

...: Beating Gridlock with a Smart Grid; U.S. DOT Truck Technology Initiatives; and State and Federal... DEPARTMENT OF TRANSPORTATION ITS Joint Program Office; Trucking Industry Mobility & Technology Coalition Annual Meeting AGENCY: Research and Innovative Technology Administration, U.S. Department of...

In-use activity, fuel use, and emissions of heavy-duty diesel roll-off refuse trucks.

PubMed

Sandhu, Gurdas S; Frey, H Christopher; Bartelt-Hunt, Shannon; Jones, Elizabeth

2015-03-01

The objectives of this study were to quantify real-world activity, fuel use, and emissions for heavy duty diesel roll-off refuse trucks; evaluate the contribution of duty cycles and emissions controls to variability in cycle average fuel use and emission rates; quantify the effect of vehicle weight on fuel use and emission rates; and compare empirical cycle average emission rates with the U.S. Environmental Protection Agency's MOVES emission factor model predictions. Measurements were made at 1 Hz on six trucks of model years 2005 to 2012, using onboard systems. The trucks traveled 870 miles, had an average speed of 16 mph, and collected 165 tons of trash. The average fuel economy was 4.4 mpg, which is approximately twice previously reported values for residential trash collection trucks. On average, 50% of time is spent idling and about 58% of emissions occur in urban areas. Newer trucks with selective catalytic reduction and diesel particulate filter had NOx and PM cycle average emission rates that were 80% lower and 95% lower, respectively, compared to older trucks without. On average, the combined can and trash weight was about 55% of chassis weight. The marginal effect of vehicle weight on fuel use and emissions is highest at low loads and decreases as load increases. Among 36 cycle average rates (6 trucks×6 cycles), MOVES-predicted values and estimates based on real-world data have similar relative trends. MOVES-predicted CO2 emissions are similar to those of the real world, while NOx and PM emissions are, on average, 43% lower and 300% higher, respectively. The real-world data presented here can be used to estimate benefits of replacing old trucks with new trucks. Further, the data can be used to improve emission inventories and model predictions. In-use measurements of the real-world activity, fuel use, and emissions of heavy-duty diesel roll-off refuse trucks can be used to improve the accuracy of predictive models, such as MOVES, and emissions inventories. Further, the activity data from this study can be used to generate more representative duty cycles for more accurate chassis dynamometer testing. Comparisons of old and new model year diesel trucks are useful in analyzing the effect of fleet turnover. The analysis of effect of haul weight on fuel use can be used by fleet managers to optimize operations to reduce fuel cost.

Truck Noise IX : Noise Reduction Study of an In-Service Diesel-Powered Truck : Volume 1. Text.

DOT National Transportation Integrated Search

1977-02-01

A series of tests to measure the noise contributions of subsystems were performed on a truck with a conventional short cab, equipped with a Cummins V-903 engine. The data acquired in these tests were used to select retrofittable components which woul...

Analysis of driver critical reason and years of driving experience in large truck crashes, analysis brief.

DOT National Transportation Integrated Search

2017-01-01

The 2005 Large Truck Crash Causation Study (LTCCS)i was the first-ever national study to attempt to determine the critical reasons and associated factors that contribute to serious large truck crashes. The LTCCS defines critical reason as the r...

EVALUATION OF FUEL CELL AUXILIARY POWER UNITS FOR HEAVY-DUTY DIESEL TRUCKS

EPA Science Inventory

A large number of heavy-duty trucks idle a significant amount. Heavy-duty line-haul truck engines idle about 30-50% of the time the engine is running. Drivers idle engines to power climate control devices (e.g., heaters and air conditioners) and sleeper compartment accessories (e...

A simulation analysis of traffic flow elements for restricted truck lanes on interstate highways in Virginia.

DOT National Transportation Integrated Search

1999-01-01

In recent years, increases in truck traffic on Virginia's highways have raised issues concerning safety and capacity on interstates such as I-81 and I-95. Lane restrictions represent a strategy that is intended to reduce conflicts between trucks and ...

75 FR 49528 - Watkins Shepard Trucking, Inc. Including Individuals Under Its Operation Control, Missoula, MT...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-13

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-73,859] Watkins Shepard Trucking... to Apply for Worker Adjustment Assistance on July 14, 2010, applicable to workers of Watkins Shepard... the Department's certification is to include all workers of Watkins Shepard Trucking, Inc., Missoula...

Evaluating the effects of heavy sugar cane truck operations on repair cost of low volume highways : technical summary report.

DOT National Transportation Integrated Search

2008-10-01

Current Louisiana state laws allow truck operators hauling certain agricultural commodities to purchase : overweight permits and haul at gross vehicle weights (GVW) in excess of the legislated GVW limit of : 80,000 lb. For instance, sugar cane trucke...

Truck Noise IX : Noise Reduction Study of an In-Service Diesel Powered Truck : Volume 2. Appendix.

DOT National Transportation Integrated Search

1977-02-01

A series of tests to measure the noise contributions of subsystems were performed on a truck with a conventional short cab, equipped with a Cummins V-903 engine. The data acquired in these tests were used to select retrofittable components which woul...

Truck Noise VIB : A Baseline Study of the Parameters Affecting Diesel Engine Intake and Exhaust Silencer Design

DOT National Transportation Integrated Search

1974-01-01

A survey of diesel engine, truck, intake system, and exhaust system manufacturers was made for the purpose of compiling detailed information on all major mass-produced diesel engines currently used in the United States for trucks and buses, and on ex...

Comprehensive Truck Size and Weight (TS&W) Study. Phase 1-synthesis, working paper 7 : truck costs and truck size and weight regulations

DOT National Transportation Integrated Search

2012-07-01

This report presents the Cost Benefit Analysis Test Plan for the national evaluation of the Los Angeles County Congestion Reduction Demonstration (LAC CRD) under the United States Department of Transportation (U.S. DOT) Congestion Reduction Demonstra...

40 CFR 80.131 - Agreed upon procedures for GTAB, certain conventional gasoline imported by truck, previously...

Code of Federal Regulations, 2010 CFR

2010-07-01

..., certain conventional gasoline imported by truck, previously certified gasoline used to produce gasoline... Agreed upon procedures for GTAB, certain conventional gasoline imported by truck, previously certified gasoline used to produce gasoline, and butane blenders. (a) Attest procedures for GTAB. The following are...

40 CFR 80.131 - Agreed upon procedures for GTAB, certain conventional gasoline imported by truck, previously...

Code of Federal Regulations, 2011 CFR

2011-07-01

..., certain conventional gasoline imported by truck, previously certified gasoline used to produce gasoline... Agreed upon procedures for GTAB, certain conventional gasoline imported by truck, previously certified gasoline used to produce gasoline, and butane blenders. (a) Attest procedures for GTAB. The following are...

40 CFR 80.131 - Agreed upon procedures for GTAB, certain conventional gasoline imported by truck, previously...

Code of Federal Regulations, 2013 CFR

2013-07-01

..., certain conventional gasoline imported by truck, previously certified gasoline used to produce gasoline... Agreed upon procedures for GTAB, certain conventional gasoline imported by truck, previously certified gasoline used to produce gasoline, and butane blenders. (a) Attest procedures for GTAB. The following are...

40 CFR 80.131 - Agreed upon procedures for GTAB, certain conventional gasoline imported by truck, previously...

Code of Federal Regulations, 2012 CFR

2012-07-01

..., certain conventional gasoline imported by truck, previously certified gasoline used to produce gasoline... Agreed upon procedures for GTAB, certain conventional gasoline imported by truck, previously certified gasoline used to produce gasoline, and butane blenders. (a) Attest procedures for GTAB. The following are...

40 CFR 80.131 - Agreed upon procedures for GTAB, certain conventional gasoline imported by truck, previously...

Code of Federal Regulations, 2014 CFR

2014-07-01

..., certain conventional gasoline imported by truck, previously certified gasoline used to produce gasoline... Agreed upon procedures for GTAB, certain conventional gasoline imported by truck, previously certified gasoline used to produce gasoline, and butane blenders. (a) Attest procedures for GTAB. The following are...

49 CFR 215.119 - Defective freight car truck.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Defective freight car truck. 215.119 Section 215... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Freight Car Components Suspension System § 215.119 Defective freight car truck. A railroad may not place or continue in service a...

49 CFR 215.119 - Defective freight car truck.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Defective freight car truck. 215.119 Section 215... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Freight Car Components Suspension System § 215.119 Defective freight car truck. A railroad may not place or continue in service a...

49 CFR 215.119 - Defective freight car truck.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Defective freight car truck. 215.119 Section 215... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Freight Car Components Suspension System § 215.119 Defective freight car truck. A railroad may not place or continue in service a...

49 CFR 215.119 - Defective freight car truck.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Defective freight car truck. 215.119 Section 215... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Freight Car Components Suspension System § 215.119 Defective freight car truck. A railroad may not place or continue in service a...

49 CFR 215.119 - Defective freight car truck.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Defective freight car truck. 215.119 Section 215... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Freight Car Components Suspension System § 215.119 Defective freight car truck. A railroad may not place or continue in service a...

3 CFR - Power Sector Carbon Pollution Standards

Code of Federal Regulations, 2014 CFR

2014-01-01

... gas emissions of new cars and light trucks through 2025 and heavy duty trucks through 2018. The EPA..., established fuel efficiency standards for cars and trucks as part of a harmonized national program. Both... Greenhouse Gas Emissions for New Stationary Sources: Electric Utility Generating Units,” 77 Fed. Reg. 22392...

Trucks involved in fatal accidents codebook 1999 (version September 19, 2001)

DOT National Transportation Integrated Search

2001-09-01

This report provides one-way frequencies for all the vehicles in UMTRI's file of Trucks Involved in Fatal Accidents (TIFA), 1999. The 1999 TIFA file is a census of all medium and heavy trucks involved in a fatal accident in the United States. The TIF...

40 CFR 80.1653 - Recordkeeping.

Code of Federal Regulations, 2014 CFR

2014-07-01

... this subpart O: (i) The location, date, time, and storage tank or truck identification for each sample... analytical testing: (i) The location, date, time, and storage tank or truck identification for each sample..., time, and storage tank or truck identification for each sample collected. (B) The name and title of the...

Extending pavement life using thin surfacing to counter the effect of increased truck traffic due to freight movements on highways.

DOT National Transportation Integrated Search

2010-07-01

The highways in the Midwest are experiencing a considerable amount of truck traffic due to increased freight : transportation. There is clearly a risk to the highway infrastructure caused by this additional truck traffic that will also have : an incr...

North American Free Trade Agreement : coordinated operational plan needed to ensure Mexican trucks' compliance with U.S. standards

DOT National Transportation Integrated Search

2001-12-01

In response to concerns about the safety of Mexican trucks, the General Accounting Office (GAO) was asked to examine (1) the extent to which Mexican-domiciled commercial trucks are likely to travel beyond U.S. border commercial zones once the border ...

Schedule II opioids and stimulants & CMV crash risk and driver performance : evidence report and systematic review.

DOT National Transportation Integrated Search

2014-10-08

Driving a large commercial truck is dangerous work. Truck drivers have a fatal work injury : rate of 22.1 per 100,000 workers, the eighth highest in the nation.1 : According to the Federal : Motor Carrier Safety Administration (FMCSA), large trucks w...

Schedule II Opioids and Stimulants & CMV Crash Risk and Driver Performance : Evidence Report and Systematic Review.

DOT National Transportation Integrated Search

2014-03-01

Driving a large commercial truck is dangerous work. Truck drivers have a fatal work injury : rate of 22.1 per 100,000 workers, the eighth highest in the nation.1 : According to the Federal : Motor Carrier Safety Administration (FMCSA), large trucks w...

75 FR 29399 - Improving Energy Security, American Competitiveness and Job Creation, and Environmental...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-26

... of Our Nation's Fleet of Cars And Trucks Memorandum for the Secretary of Transportation[,] the... the development of a new generation of clean cars and trucks through innovative technologies and..., 2010, which regulates these attributes of passenger cars and light-duty trucks for model years 2012...

40 CFR 60.390 - Applicability and designation of affected facility.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Performance for Automobile and Light Duty Truck Surface Coating Operations § 60.390 Applicability and... facilities in an automobile or light-duty truck assembly plant: each prime coat operation, each guide coat... to coat plastic body components or all-plastic automobile or light-duty truck bodies on separate...

40 CFR 60.390 - Applicability and designation of affected facility.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Performance for Automobile and Light Duty Truck Surface Coating Operations § 60.390 Applicability and... facilities in an automobile or light-duty truck assembly plant: each prime coat operation, each guide coat... to coat plastic body components or all-plastic automobile or light-duty truck bodies on separate...

40 CFR 60.390 - Applicability and designation of affected facility.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Performance for Automobile and Light Duty Truck Surface Coating Operations § 60.390 Applicability and... facilities in an automobile or light-duty truck assembly plant: each prime coat operation, each guide coat... to coat plastic body components or all-plastic automobile or light-duty truck bodies on separate...

Weight Reduction Potential of Automobiles and Light Trucks, 1979 Summary Source Document

DOT National Transportation Integrated Search

1980-03-01

The purpose of this report is to provide an assessment of the potential for weight reduction for passenger cars and light trucks (including pickup trucks, vans, and utility vehicles of GVWR up to 8500 pounds) in the 1980 to 2000 model year period. Va...

77 FR 22224 - Approval and Promulgation of Air Quality Implementation Plans; Delaware; Amendments to the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-13

... of Volatile Organic Compounds Emissions; Automobile and Light-Duty Truck Coating Operations; Paper... compound (VOC) emissions from industrial cleaning solvents facilities; automobile and light-duty truck..., ``Automobile and Light-Duty Truck Coating Operations,'' section 16.0, ``Paper Coating,'' section 23.0...

Risk of commercial truck fires in the United States : an exploratory data analysis

DOT National Transportation Integrated Search

2012-06-29

Large trucks are involved in only 8 percent of fatal crashes per year, but 17 percent of fatal fires. The scope of the current body of research is limited. Studies have treated truck fires generally as a subset of vehicle fires or in their own right ...

40 CFR 63.3081 - Am I subject to this subpart?

Code of Federal Regulations, 2011 CFR

2011-07-01

... replacement parts for automobiles, light-duty trucks, or other motor vehicles; and the affected source is... Standards for Hazardous Air Pollutants: Surface Coating of Automobiles and Light-Duty Trucks What This... section, the source category to which this subpart applies is automobile and light-duty truck surface...

Performance of a logging truck with a central tire inflation system.

Treesearch

John A. Sturos; Douglas B. Brumm; Andrew Lehto

1995-01-01

Describes the performance of an 11-axle logging truck with a central tire inflation system. Results included reduced damages to roads, improved ride of the truck, improved drawbar pull, and reduced rolling resistance. Road construction costs were reduced 62%, primarily due to using 33% less gravel.

Incentivizing truck retrofitting in port drayage : a study of drivers at the Ports of Los Angeles and Long Beach.

DOT National Transportation Integrated Search

2008-02-01

Using data from detailed surveys of truck drivers, the wages and working conditions of drivers involved in port drayage were : analyzed. Focus as on drivers' willingness to pay for retrofitting and their preferences regarding different truck replacem...

Raised pavement marker (RPM) placement system support : Georgia DOT research project 12-06 : final report.

DOT National Transportation Integrated Search

2013-06-10

During the funding provided in FY2013, the GTRI developed RPM placement truck was reworked to prepare the truck : for full-time service on Georgia roadways. During this effort, the RPM truck was configured for a certain type of lane : striping th...

Contributions of Diesel Truck Emissions to Indoor Elemental Carbon Concentrations in Home Proximate to Ambassador Bridge

EPA Science Inventory

Ambassador Bridge, connecting Detroit, Michigan and Windsor, Ontario, is the busiest international commercial vehicle crossing in North America, with a large percentage of heavy duty diesel trucks. This study seeks to examine the contribution of diesel truck traffic across Ambass...

The development of a model and decision support system to use in forecasting truck freight flow in the continental United States

DOT National Transportation Integrated Search

2001-01-01

This research develops a regression-based model for forecasting truck borne freight in the continental United States. This model is capable of predicting freight commodity flow information via trucks to assist transportation planners who wish to unde...

An Attempt to Identify Indicators of Competence on Mechanical Maintenance Tasks.

DTIC Science & Technology

1979-01-01

them on the DA Form 2404. The vehicle is prepared as follows: 1. Left front wheel and drum removed. 2. Retracting spring disconnected. 3. Brake pedal...charging system. 8 2. Troubleshoot starting system circuit on Ml51Al/A2 truck. ii 3. Replace steering linkage on Ml5lAl/A2 truck. 8 4. Troubleshoot brakes ...Troubleshoot starting system circuit on MI51AI/A2 truck. 101 3. Replace steering linkage on MI51AI/A2 truck. 96 4. Troubleshoot brakes and controls

Mapping U.S. long-haul truck drivers' multiplex networks and risk topography in inner-city neighborhoods

PubMed Central

Apostolopoulos, Yorghos; Sönmez, Sevil; Lemke, Michael Kenneth; Rothenberg, Richard B.

2015-01-01

This article illustrates how urban inner-city trucking milieux may influence STI/BBI/HIV acquisition and transmission risks for U.S. long-haul truckers, as well as their social and risk relationships. Using mixed methods, we collected ethnoepidemiological and biological data from long-haul truck drivers and their risk contacts in inner-city trucking milieux in Atlanta, Georgia, United States. Key findings indicate that within the risk-endemic environment of distressed inner-city areas, diverse trucking risk milieux can amplify STI/BBI/HIV risk for multiplex networks of truckers. Inner-city neighborhood location, short geographic distance among risk contacts, and trucker concurrency can potentially exacerbate transmission via bridging higher-risk individuals with lower-risk populations at disparate geographic and epidemiological locations. PMID:25863181

Log Truck-Weighing System

NASA Technical Reports Server (NTRS)

1977-01-01

ELDEC Corp., Lynwood, Wash., built a weight-recording system for logging trucks based on electronic technology the company acquired as a subcontractor on space programs such as Apollo and the Saturn launch vehicle. ELDEC employed its space-derived expertise to develop a computerized weight-and-balance system for Lockheed's TriStar jetliner. ELDEC then adapted the airliner system to a similar product for logging trucks. Electronic equipment computes tractor weight, trailer weight and overall gross weight, and this information is presented to the driver by an instrument in the cab. The system costs $2,000 but it pays for itself in a single year. It allows operators to use a truck's hauling capacity more efficiently since the load can be maximized without exceeding legal weight limits for highway travel. Approximately 2,000 logging trucks now use the system.

Impact of federal compliance reviews of trucking companies in reducing highway truck crashes.

PubMed

Chen, Guang Xiang

2008-01-01

The compliance review (CR) is a federal program monitoring motor carrier safety performance and regulatory compliance. This study sought to assess the impact of CRs on reviewed trucking companies in reducing truck crashes. Data was from the Motor Carrier Management Information System. Study subjects were trucking companies established during 1990-1995, had at least one truck, and remained active until April 2004. Truck crash data of these companies was examined from 1996 to 2003. The crash rates in 2003 and annual percentage changes in number of crashes were computed. Analyses were stratified by company size, organization, operation classification, and safety rating. Companies that received CRs had a higher crash rate than never-reviewed companies. Reviewed companies experienced a 39-15% reduction in number of crashes in the year the CR was performed. The reduction in crashes was observed in all reviewed companies regardless of company size, operation classification, type of organization, or safety rating. The reduction in crashes was sustained for at least 7 years after CRs. The study results were controlled for the year in which CRs were performed, crash trend, and CR selection bias. However, further studies, especially a randomized prospective longitudinal study, are needed to overcome the limitations that are associated with an observation study.

Carbon monoxide poisoning in children riding in the back of pickup trucks.

PubMed

Hampson, N B; Norkool, D M

OBJECTIVE - To describe the case characteristics of a series of children poisoned with carbon monoxide while traveling in the back of pickup trucks. DESIGN - Pediatric cases referred for treatment of carbon monoxide poisoning with hyperbaric oxygen between 1986 and 1991 were reviewed. Those cases that occurred during travel in the back of pickup trucks were selected. Clinical follow-up by telephone interview ranged from 2 to 55 months. SETTING - A private, urban, tertiary care center in Seattle, Wash. PATIENTS - Twenty children ranging from 4 to 16 years of age. INTERVENTION - All patients were treated with hyperbaric oxygen. MAIN OUTCOME MEASURES - Characteristics of the poisoning incident and clinical patient outcome. RESULTS - Of 68 pediatric patients treated for accidental carbon monoxide poisoning, 20 cases occurred as children rode in the back of pickup trucks. In 17 of these, the children were riding under a rigid closed canopy on the rear of the truck, while three episodes occurred as children rode beneath a tarpaulin. Average carboxyhemoglobin level on emergency department presentation was 18.2% +/- 2.4% (mean +/- SEM; range, 1.6% to 37.0%). Loss of consciousness occurred in 15 of the 20 children. One child died of cerebral edema, one had permanent neurologic deficits, and 18 had no recognizable sequelae related to the episode. In all cases, the truck exhaust system had a previously known leak or a tail pipe that exited at the rear rather than at the side of the pickup truck. CONCLUSIONS - Carbon monoxide poisoning is a significant hazard for children who ride in the back of pickup trucks. If possible, this practice should be avoided.

Effects of diesel particle filter retrofits and accelerated fleet turnover on drayage truck emissions at the Port of Oakland.

PubMed

Dallmann, Timothy R; Harley, Robert A; Kirchstetter, Thomas W

2011-12-15

Heavy-duty diesel drayage trucks have a disproportionate impact on the air quality of communities surrounding major freight-handling facilities. In an attempt to mitigate this impact, the state of California has mandated new emission control requirements for drayage trucks accessing ports and rail yards in the state beginning in 2010. This control rule prompted an accelerated diesel particle filter (DPF) retrofit and truck replacement program at the Port of Oakland. The impact of this program was evaluated by measuring emission factor distributions for diesel trucks operating at the Port of Oakland prior to and following the implementation of the emission control rule. Emission factors for black carbon (BC) and oxides of nitrogen (NO(x)) were quantified in terms of grams of pollutant emitted per kilogram of fuel burned using a carbon balance method. Concentrations of these species along with carbon dioxide were measured in the exhaust plumes of individual diesel trucks as they drove by en route to the Port. A comparison of emissions measured before and after the implementation of the truck retrofit/replacement rule shows a 54 ± 11% reduction in the fleet-average BC emission factor, accompanied by a shift to a more highly skewed emission factor distribution. Although only particulate matter mass reductions were required in the first year of the program, a significant reduction in the fleet-average NO(x) emission factor (41 ± 5%) was observed, most likely due to the replacement of older trucks with new ones.

Solid Oxide Fuel Cell Development for Auxiliary Power in Heavy Duty Vehicle Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daniel T. Hennessy

2010-06-15

Changing economic and environmental needs of the trucking industry is driving the use of auxiliary power unit (APU) technology for over the road haul trucks. The trucking industry in the United States remains the key to the economy of the nation and one of the major changes affecting the trucking industry is the reduction of engine idling. Delphi Automotive Systems, LLC (Delphi) teamed with heavy-duty truck Original Equipment Manufacturers (OEMs) PACCAR Incorporated (PACCAR), and Volvo Trucks North America (VTNA) to define system level requirements and develop an SOFC based APU. The project defines system level requirements, and subsequently designs andmore » implements an optimized system architecture using an SOFC APU to demonstrate and validate that the APU will meet system level goals. The primary focus is on APUs in the range of 3-5 kW for truck idling reduction. Fuels utilized were derived from low-sulfur diesel fuel. Key areas of study and development included sulfur remediation with reformer operation; stack sensitivity testing; testing of catalyst carbon plugging and combustion start plugging; system pre-combustion; and overall system and electrical integration. This development, once fully implemented and commercialized, has the potential to significantly reduce the fuel idling Class 7/8 trucks consume. In addition, the significant amounts of NOx, CO2 and PM that are produced under these engine idling conditions will be virtually eliminated, inclusive of the noise pollution. The environmental impact will be significant with the added benefit of fuel savings and payback for the vehicle operators / owners.« less

Alternative Fuels Data Center: Truck Stop Electrification Site Data

Science.gov Websites

Collection Methods Tools Printable Version Share this resource Send a link to Alternative Fuels Data Center: Truck Stop Electrification Site Data Collection Methods to someone by E-mail Share Alternative Fuels Data Center: Truck Stop Electrification Site Data Collection Methods on Facebook Tweet about

Frito-Lay Electric Delivery Truck Testing | Transportation Research | NREL

Science.gov Websites

Frito-Lay Electric Delivery Truck Evaluation Frito-Lay Electric Delivery Truck Evaluation Photo of . The on-road portion of this 12-month evaluation, launched in 2013, focuses on collecting and analyzing . Publications The following documents provide more information about the study. Field Evaluation of Medium-Duty

Truck Noise X : Noise Reduction Options for Diesel Powered International Harvester Trucks : Volume 1. Development Work.

DOT National Transportation Integrated Search

1977-04-01

Noise reduction option development work was carried out on two inservice diesel powered IH trucks, consisting of a Cab-over model and a Conventional model with a baseline exterior noise level of 87 dB(A) each. Since no specific noise goals were set, ...

Information needs for increasing log transport efficiency

Treesearch

Timothy P. McDonald; Steven E. Taylor; Robert B. Rummer; Jorge Valenzuela

2001-01-01

Three methods of dispatching trucks to loggers were tested using a log transport simulation model: random allocation, fixed assignment of trucks to loggers, and dispatch based on knowledge of the current status of trucks and loggers within the system. This 'informed' dispatch algorithm attempted to minimize the difference in time between when a logger would...

3 CFR - Imports of Certain Passenger Vehicle and Light Truck Tires From the People's Republic of China

Code of Federal Regulations, 2010 CFR

2010-01-01

... Tires From the People's Republic of China Presidential Documents Other Presidential Documents... Truck Tires From the People's Republic of China Memorandum for the Secretary of Commerce[,] the... vehicle and light truck tires from the People's Republic of China (China) are being imported into the...

75 FR 20005 - Crawler, Locomotive, and Truck Cranes Standard; Extension of the Office of Management and Budget...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-16

...] Crawler, Locomotive, and Truck Cranes Standard; Extension of the Office of Management and Budget's (OMB... Crawler, Locomotive, and Truck Cranes Standard (29 CFR 1910.180). DATES: Comments must be submitted... of each of these requirements is to prevent workers from using unsafe cranes and ropes, thereby...

Alternative Fuels Data Center: Alpha Baking Company Augments Its Fleet With

Science.gov Websites

Propane Delivery Trucks Alpha Baking Company Augments Its Fleet With Propane Delivery Trucks to someone by E-mail Share Alternative Fuels Data Center: Alpha Baking Company Augments Its Fleet With Propane Delivery Trucks on Facebook Tweet about Alternative Fuels Data Center: Alpha Baking Company

Alternative Fuels Data Center: Wisconsin Reduces Emissions With Natural Gas

Science.gov Websites

TrucksA> Wisconsin Reduces Emissions With Natural Gas Trucks to someone by E-mail Share reduces emissions and greenhouse gases with compressed natural gas trucks. For information about this and FuelEconomy.gov. Provided by Maryland Public Television Related Videos Photo of a car Hydrogen

30 CFR Appendix I to Subpart M of... - National Consensus Standards

Code of Federal Regulations, 2010 CFR

2010-07-01

... object protective structures (FOPS) SAE J231—January, 1981. Fork-lift trucks American National Standards Institute (ANSI) safety standard for low lift and high lift trucks, B 56.1, section 7.27—1983; or, American National Standards Institute (ANSI) standard, rough terrain fork lift trucks, B56.6—1987. ...

30 CFR Appendix I to Subpart M of... - National Consensus Standards

Code of Federal Regulations, 2010 CFR

2010-07-01

... object protective structures (FOPS) SAE J231—January, 1981. Fork-lift trucks American National Standards Institute (ANSI) safety standard for low lift and high lift trucks, B 56.1, section 7.27—1983; or American National Standards Institute (ANSI) standard, rough terrain fork lift trucks, B 56.6—1987. ...

30 CFR Appendix I to Subpart M of... - National Consensus Standards

Code of Federal Regulations, 2011 CFR

2011-07-01

... object protective structures (FOPS) SAE J231—January, 1981. Fork-lift trucks American National Standards Institute (ANSI) safety standard for low lift and high lift trucks, B 56.1, section 7.27—1983; or American National Standards Institute (ANSI) standard, rough terrain fork lift trucks, B 56.6—1987. ...

30 CFR Appendix I to Subpart M of... - National Consensus Standards

Code of Federal Regulations, 2011 CFR

2011-07-01

... object protective structures (FOPS) SAE J231—January, 1981. Fork-lift trucks American National Standards Institute (ANSI) safety standard for low lift and high lift trucks, B 56.1, section 7.27—1983; or, American National Standards Institute (ANSI) standard, rough terrain fork lift trucks, B56.6—1987. ...

29 CFR 1917.43 - Powered industrial trucks.

Code of Federal Regulations, 2011 CFR

2011-07-01

... engagement hidden from the operator, a means shall be provided to enable the operator to determine that the... employees. Employees may be elevated by fork lift trucks only when a platform is secured to the lifting...) if tools or other objects could fall on employees below. (iii) An employee shall be at the truck's...

29 CFR 1917.43 - Powered industrial trucks.

Code of Federal Regulations, 2010 CFR

2010-07-01

... engagement hidden from the operator, a means shall be provided to enable the operator to determine that the... employees. Employees may be elevated by fork lift trucks only when a platform is secured to the lifting...) if tools or other objects could fall on employees below. (iii) An employee shall be at the truck's...

41 CFR 109-38.104 - Fuel efficient passenger automobiles and light trucks.

Code of Federal Regulations, 2011 CFR

2011-01-01

... automobiles and light trucks. 109-38.104 Section 109-38.104 Public Contracts and Property Management Federal... Vehicles § 109-38.104 Fuel efficient passenger automobiles and light trucks. (a) [Reserved] (b) All requests to purchase passenger automobiles larger than class IA, IB, or II (small, subcompact, or compact...

41 CFR 109-38.104 - Fuel efficient passenger automobiles and light trucks.

Code of Federal Regulations, 2013 CFR

2013-07-01

... automobiles and light trucks. 109-38.104 Section 109-38.104 Public Contracts and Property Management Federal... Vehicles § 109-38.104 Fuel efficient passenger automobiles and light trucks. (a) [Reserved] (b) All requests to purchase passenger automobiles larger than class IA, IB, or II (small, subcompact, or compact...

41 CFR 109-38.104 - Fuel efficient passenger automobiles and light trucks.

Code of Federal Regulations, 2014 CFR

2014-01-01

... automobiles and light trucks. 109-38.104 Section 109-38.104 Public Contracts and Property Management Federal... Vehicles § 109-38.104 Fuel efficient passenger automobiles and light trucks. (a) [Reserved] (b) All requests to purchase passenger automobiles larger than class IA, IB, or II (small, subcompact, or compact...

41 CFR 109-38.104 - Fuel efficient passenger automobiles and light trucks.

Code of Federal Regulations, 2010 CFR

2010-07-01

... automobiles and light trucks. 109-38.104 Section 109-38.104 Public Contracts and Property Management Federal... Vehicles § 109-38.104 Fuel efficient passenger automobiles and light trucks. (a) [Reserved] (b) All requests to purchase passenger automobiles larger than class IA, IB, or II (small, subcompact, or compact...

41 CFR 109-38.104 - Fuel efficient passenger automobiles and light trucks.

Code of Federal Regulations, 2012 CFR

2012-01-01

... automobiles and light trucks. 109-38.104 Section 109-38.104 Public Contracts and Property Management Federal... Vehicles § 109-38.104 Fuel efficient passenger automobiles and light trucks. (a) [Reserved] (b) All requests to purchase passenger automobiles larger than class IA, IB, or II (small, subcompact, or compact...

Alternative Fuels Data Center: Heavy-Duty Truck Idle Reduction Technologies

Science.gov Websites

reduction technologies. Both DOE and the U.S. Environmental Protection Agency (EPA) provide information Heavy-Duty Truck Idle Reduction Technologies to someone by E-mail Share Alternative Fuels Data Center: Heavy-Duty Truck Idle Reduction Technologies on Facebook Tweet about Alternative Fuels Data

NREL Validates Plug-In Hybrid Truck for Pacific Gas and Electric Company |

Science.gov Websites

Energy Systems Integration Facility | NREL Pacific Gas and Electric Company NREL Validates Plug -In Hybrid Truck for Pacific Gas and Electric Company NREL is evaluating and analyzing a Pacific Gas and Electric Company (PG&E) plug-in hybrid electric utility truck developed by Efficient

40 CFR 86.087-2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... vehicle weight equal to or less than 3,750 lbs (LDDT1s) together in the particulate averaging program... light-duty truck production for those engine families with a loaded vehicle weight equal to or less than... light-duty truck particulate standard for diesel light-duty trucks with a loaded vehicle weight equal to...

49 CFR 393.55 - Antilock brake systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 57396, Sept. 21, 2010. (a) Hydraulic brake systems. Each truck and bus manufactured on or after March 1, 1999 (except trucks and buses engaged in driveaway-towaway operations), and equipped with a hydraulic... FMVSS No. 105 (49 CFR 571.105, S5.3). (c) Air brake systems. (1) Each truck tractor manufactured on or...

Training Guidelines: Fork Lift Truck Driving.

ERIC Educational Resources Information Center

Ceramics, Glass, and Mineral Products Industry Training Board, Harrow (England).

This manual of operative training guidelines for fork lift truck driving has been developed by the Ceramics, Glass and Mineral Products Industry Training Board (Great Britain) in consultation with a number of firms which manufacture fork lift trucks or which already have training--programs for their use. The purpose of the guidelines is to assist…

40 CFR 86.1840-01 - Special test procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Compliance Provisions for Control of Air Pollution From New and In-Use Light-Duty Vehicles, Light-Duty Trucks... those set forth in this part, for any light-duty vehicle, light-duty truck, or complete heavy-duty... special test procedures but the Administrator determines that a light-duty vehicle, light-duty truck, or...

26 CFR 48.4052-1 - Heavy trucks and trailers; certification requirement.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 16 2010-04-01 2010-04-01 true Heavy trucks and trailers; certification requirement. 48.4052-1 Section 48.4052-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY..., Tread Rubber, and Taxable Fuel Automotive and Related Items § 48.4052-1 Heavy trucks and trailers...

Coca-Cola Hybrid Electric Delivery Truck Testing | Transportation Research

Science.gov Websites

other on-road performance data on five heavy-duty hybrid electric trucks and five conventional diesel the study, the hybrid vehicles demonstrated 13.7% higher fuel economy than their conventional information about the study. Project Startup: Evaluating Coca-Cola's Class 8 Hybrid Electric Delivery Trucks

9 CFR 71.5 - Unsanitary railroad cars, trucks, boats, aircraft or other means of conveyance; interstate...

Code of Federal Regulations, 2010 CFR

2010-01-01

..., boats, aircraft or other means of conveyance; interstate movement restricted. 71.5 Section 71.5 Animals... cars, trucks, boats, aircraft or other means of conveyance; interstate movement restricted. No person who receives notice from an APHIS representative that a railroad car, truck, boat, aircraft or other...

9 CFR 71.5 - Unsanitary railroad cars, trucks, boats, aircraft or other means of conveyance; interstate...

Code of Federal Regulations, 2013 CFR

2013-01-01

..., boats, aircraft or other means of conveyance; interstate movement restricted. 71.5 Section 71.5 Animals... cars, trucks, boats, aircraft or other means of conveyance; interstate movement restricted. No person who receives notice from an APHIS representative that a railroad car, truck, boat, aircraft or other...

9 CFR 71.5 - Unsanitary railroad cars, trucks, boats, aircraft or other means of conveyance; interstate...

Code of Federal Regulations, 2012 CFR

2012-01-01

..., boats, aircraft or other means of conveyance; interstate movement restricted. 71.5 Section 71.5 Animals... cars, trucks, boats, aircraft or other means of conveyance; interstate movement restricted. No person who receives notice from an APHIS representative that a railroad car, truck, boat, aircraft or other...

9 CFR 71.5 - Unsanitary railroad cars, trucks, boats, aircraft or other means of conveyance; interstate...

Code of Federal Regulations, 2014 CFR

2014-01-01

..., boats, aircraft or other means of conveyance; interstate movement restricted. 71.5 Section 71.5 Animals... cars, trucks, boats, aircraft or other means of conveyance; interstate movement restricted. No person who receives notice from an APHIS representative that a railroad car, truck, boat, aircraft or other...

9 CFR 71.5 - Unsanitary railroad cars, trucks, boats, aircraft or other means of conveyance; interstate...

Code of Federal Regulations, 2011 CFR

2011-01-01

..., boats, aircraft or other means of conveyance; interstate movement restricted. 71.5 Section 71.5 Animals... cars, trucks, boats, aircraft or other means of conveyance; interstate movement restricted. No person who receives notice from an APHIS representative that a railroad car, truck, boat, aircraft or other...

Modeling truck speed in the upstream of one-lane two-way highway work zones : implications on reducing truck-related crashes in work zones.

DOT National Transportation Integrated Search

2011-07-01

Truck-related crashes constitute a major safety concern for government agencies, the construction industry, and the traveling public. Due to the rising needs in highway maintenance and construction, the number of work zones is increasing throughout t...

49 CFR 230.105 - Lateral motion.

Code of Federal Regulations, 2014 CFR

2014-10-01

... between the hubs of the wheels and the boxes on any pair of wheels shall not exceed the following limits: Inches Engine truck wheels (with swing centers) 1 Engine truck wheels (with rigid centers) 11/2 Trailing truck wheels 1 Driving wheels 3/4 (b) Limits increased. These limits may be increased on steam...

49 CFR 230.105 - Lateral motion.

Code of Federal Regulations, 2010 CFR

2010-10-01

... between the hubs of the wheels and the boxes on any pair of wheels shall not exceed the following limits: Inches Engine truck wheels (with swing centers) 1 Engine truck wheels (with rigid centers) 11/2 Trailing truck wheels 1 Driving wheels 3/4 (b) Limits increased. These limits may be increased on steam...

49 CFR 230.105 - Lateral motion.

Code of Federal Regulations, 2011 CFR

2011-10-01

... between the hubs of the wheels and the boxes on any pair of wheels shall not exceed the following limits: Inches Engine truck wheels (with swing centers) 1 Engine truck wheels (with rigid centers) 11/2 Trailing truck wheels 1 Driving wheels 3/4 (b) Limits increased. These limits may be increased on steam...

49 CFR 230.105 - Lateral motion.

Code of Federal Regulations, 2012 CFR

2012-10-01

... between the hubs of the wheels and the boxes on any pair of wheels shall not exceed the following limits: Inches Engine truck wheels (with swing centers) 1 Engine truck wheels (with rigid centers) 11/2 Trailing truck wheels 1 Driving wheels 3/4 (b) Limits increased. These limits may be increased on steam...

49 CFR 230.105 - Lateral motion.

Code of Federal Regulations, 2013 CFR

2013-10-01

... between the hubs of the wheels and the boxes on any pair of wheels shall not exceed the following limits: Inches Engine truck wheels (with swing centers) 1 Engine truck wheels (with rigid centers) 11/2 Trailing truck wheels 1 Driving wheels 3/4 (b) Limits increased. These limits may be increased on steam...

The Impact of Wireless Technology on Loading Trucks at an Auto Parts Distribution Center

ERIC Educational Resources Information Center

Goomas, David T.

2012-01-01

An intervention was introduced for truck loaders that used wireless vehicle mount computers that included auditory, visual feedback, and immediate data delivery. The implementation reliably reduced pallets from being loaded out of sequence for all outbound trucks in multistop routes. The role of the organizational behavior management (OBM)…

Integrated technologies for solid waste bin monitoring system.

PubMed

Arebey, Maher; Hannan, M A; Basri, Hassan; Begum, R A; Abdullah, Huda

2011-06-01

The integration of communication technologies such as radio frequency identification (RFID), global positioning system (GPS), general packet radio system (GPRS), and geographic information system (GIS) with a camera are constructed for solid waste monitoring system. The aim is to improve the way of responding to customer's inquiry and emergency cases and estimate the solid waste amount without any involvement of the truck driver. The proposed system consists of RFID tag mounted on the bin, RFID reader as in truck, GPRS/GSM as web server, and GIS as map server, database server, and control server. The tracking devices mounted in the trucks collect location information in real time via the GPS. This information is transferred continuously through GPRS to a central database. The users are able to view the current location of each truck in the collection stage via a web-based application and thereby manage the fleet. The trucks positions and trash bin information are displayed on a digital map, which is made available by a map server. Thus, the solid waste of the bin and the truck are being monitored using the developed system.

Exploring Fuel-Saving Potential of Long-Haul Truck Hybridization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gao, Zhiming; LaClair, Tim J.; Smith, David E.

We report our comparisons on the simulated fuel economy for parallel, series, and dual-mode hybrid electric long-haul trucks, in addition to a conventional powertrain configuration, powered by a commercial 2010-compliant 15-L diesel engine over a freeway-dominated heavy-duty truck driving cycle. The driving cycle was obtained by measurement during normal driving conditions. The results indicated that both parallel and dual-mode hybrid powertrains were capable of improving fuel economy by 7% to 8%. But there was no significant fuel economy benefit for the series hybrid truck because of internal inefficiencies in energy exchange. When reduced aerodynamic drag and tire rolling resistance weremore » combined with hybridization, there was a synergistic fuel economy benefit for appropriate hybrids that increased the fuel economy benefit to more than 15%. Long-haul hybrid trucks with reduced aerodynamic drag and rolling resistance offered lower peak engine loads, better kinetic energy recovery, and reduced average engine power demand. Therefore, it is expected that hybridization with load reduction technologies offers important potential fuel energy savings for future long-haul trucks.« less

Dynamic simulation of train-truck collision at level crossings

NASA Astrophysics Data System (ADS)

Ling, Liang; Guan, Qinghua; Dhanasekar, Manicka; Thambiratnam, David P.

2017-01-01

Trains crashing onto heavy road vehicles stuck across rail tracks are more likely occurrences at level crossings due to ongoing increase in the registration of heavy vehicles and these long heavy vehicles getting caught in traffic after partly crossing the boom gate; these incidents lead to significant financial losses and societal costs. This paper presents an investigation of the dynamic responses of trains under frontal collision on road trucks obliquely stuck on rail tracks at level crossings. This study builds a nonlinear three-dimensional multi-body dynamic model of a passenger train colliding with an obliquely stuck road truck on a ballasted track. The model is first benchmarked against several train dynamics packages and its predictions of the dynamic response and derailment potential are shown rational. A geometry-based derailment assessment criterion is applied to evaluate the derailment behaviour of the frontal obliquely impacted trains under different conditions. Sensitivities of several key influencing parameters, such as the train impact speed, the truck mass, the friction at truck tyres, the train-truck impact angle, the contact friction at the collision zone, the wheel/rail friction and the train suspension are reported.

An overload behavior detection system for engineering transport vehicles based on deep learning

NASA Astrophysics Data System (ADS)

Zhou, Libo; Wu, Gang

2018-04-01

This paper builds an overloaded truck detect system called ITMD to help traffic department automatically identify the engineering transport vehicles (commonly known as `dirt truck') in CCTV and determine whether the truck is overloaded or not. We build the ITMD system based on the Single Shot MultiBox Detector (SSD) model. By constructing the image dataset of the truck and adjusting hyper-parameters of the original SSD neural network, we successfully trained a basic network model which the ITMD system depends on. The basic ITMD system achieves 83.01% mAP on classifying overload/non-overload truck, which is a not bad result. Still, some shortcomings of basic ITMD system have been targeted to enhance: it is easy for the ITMD system to misclassify other similar vehicle as truck. In response to this problem, we optimized the basic ITMD system, which effectively reduced basic model's false recognition rate. The optimized ITMD system achieved 86.18% mAP on the test set, which is better than the 83.01% mAP of the basic ITMD system.

Exploring Fuel-Saving Potential of Long-Haul Truck Hybridization

DOE PAGES

Gao, Zhiming; LaClair, Tim J.; Smith, David E.; ...

2015-10-01

We report our comparisons on the simulated fuel economy for parallel, series, and dual-mode hybrid electric long-haul trucks, in addition to a conventional powertrain configuration, powered by a commercial 2010-compliant 15-L diesel engine over a freeway-dominated heavy-duty truck driving cycle. The driving cycle was obtained by measurement during normal driving conditions. The results indicated that both parallel and dual-mode hybrid powertrains were capable of improving fuel economy by 7% to 8%. But there was no significant fuel economy benefit for the series hybrid truck because of internal inefficiencies in energy exchange. When reduced aerodynamic drag and tire rolling resistance weremore » combined with hybridization, there was a synergistic fuel economy benefit for appropriate hybrids that increased the fuel economy benefit to more than 15%. Long-haul hybrid trucks with reduced aerodynamic drag and rolling resistance offered lower peak engine loads, better kinetic energy recovery, and reduced average engine power demand. Therefore, it is expected that hybridization with load reduction technologies offers important potential fuel energy savings for future long-haul trucks.« less

Radio Frequency Identification (RFID) and communication technologies for solid waste bin and truck monitoring system.

PubMed

Hannan, M A; Arebey, Maher; Begum, R A; Basri, Hassan

2011-12-01

This paper deals with a system of integration of Radio Frequency Identification (RFID) and communication technologies for solid waste bin and truck monitoring system. RFID, GPS, GPRS and GIS along with camera technologies have been integrated and developed the bin and truck intelligent monitoring system. A new kind of integrated theoretical framework, hardware architecture and interface algorithm has been introduced between the technologies for the successful implementation of the proposed system. In this system, bin and truck database have been developed such a way that the information of bin and truck ID, date and time of waste collection, bin status, amount of waste and bin and truck GPS coordinates etc. are complied and stored for monitoring and management activities. The results showed that the real-time image processing, histogram analysis, waste estimation and other bin information have been displayed in the GUI of the monitoring system. The real-time test and experimental results showed that the performance of the developed system was stable and satisfied the monitoring system with high practicability and validity. Copyright © 2011 Elsevier Ltd. All rights reserved.

The Evaluation of Developing Vehicle Technologies on the Fuel Economy of Long-Haul Trucks

DOE PAGES

Gao, Zhiming; Smith, David E.; Daw, C. Stuart; ...

2015-12-01

We present fuel savings estimates resulting from the combined implementation of multiple advanced energy management technologies in both conventional and parallel hybrid class 8 diesel trucks. The energy management technologies considered here have been specifically targeted by the 21st Century Truck Partnership (21 CTP) between the U.S. Department of Energy and U.S. industry and include advanced combustion engines, waste heat recovery, and reductions in auxiliary loads, rolling resistance, aerodynamic drag, and gross vehicle weight. Furthermore, we estimated that combined use of all these technologies in hybrid trucks has the potential to improve fuel economy by more than 60% compared tomore » current conventional trucks, but this requires careful system integration to avoid non-optimal interactions. Major factors to be considered in system integration are discussed.« less

Consistent Condom Use during Casual Sex among Long-Truck Drivers in Togo.

PubMed

Yaya, Issifou; Landoh, Dadja Essoya; Saka, Bayaki; Vignikin, Kokou; Aboubakari, Abdoul-Samadou; N'dri, Kouamé Mathias; Gbetoglo, Kodjo Dodji; Edorh, Atavi-Mensah; Ahlegnan, Komla; Yenkey, Holali Comlan; Toudeka, Ayawavi Sitsopé; Pitché, Palokinam

2016-01-01

In 2008, the proportion of truck drivers who were not systematically protected during sex was 63% with casual partners and 60% with sex workers. Despite the high level of knowledge on HIV/AIDS and the growing awareness of the existence of the risk of HIV infection, condom use always encounters resistance among truck drivers in Togo. We sought to document the factors associated with condom use during casual sex among trucks' drivers in Togo. This was an analytical cross-sectional study conducted in 2010 and targeted truckers at truck station on the two main roads of Togo, Lomé-Cinkassé and Kodjoviakopé-Sanvee Condji. In this study, 1,782 trucks' drivers and their helpers were interviewed. All were men, and their mean age was 28.8 ± 8.8 years. Trucks' drivers were doing an average of 3 stops on their journeys and 1,229 (69%) of them had at least two years of experience in the work. Of the 1,782 trucks' drivers, only 620 (34.8%) had consistently used condoms during casual sex in the last three months. In multivariate analysis, predictors were: education level (primary schooling: OR = 1.54; p = 0.002; Secondary schooling and higher OR = 1.38; p = 0.036), good knowledge of ways of HIV transmission (OR = 1.53; p = 0.000), tested for HIV (OR = 1.67, p = 0.000), duration in the profession (2-5 years: OR = 1.43, p = 0.008; more than 5 years: OR = 1.38, p = 0.027), and HIV risk's perception (OR = 1.44, p = 0.000). These results highlight factors associated with consistent condom use during casual sex by truck drivers in Togo. This is a key population group at high risk of HIV transmission toward which the national HIV/AIDS control program should strengthen the HIV prevention strategies.

Effects of Particle Filters and Selective Catalytic Reduction on In-Use Heavy-Duty Diesel Truck Emissions

NASA Astrophysics Data System (ADS)

Preble, C.; Cados, T.; Harley, R.; Kirchstetter, T.

2016-12-01

Heavy-duty diesel trucks (HDDT) are a major source of nitrogen oxides (NOx) and black carbon (BC) in urban environments, contributing to persistent ozone and particulate matter air quality problems. Diesel particle filters (DPFs) and selective catalytic reduction (SCR) systems that target PM and NOx emissions, respectively, have recently become standard equipment on new HDDT. DPFs can also be installed on older engines as a retrofit device. Previous work has shown that DPF and SCR systems can reduce NOx and BC emissions by up to 70% and 90%, respectively, compared to modern trucks without these after-treatment controls (Preble et al., ES&T 2015). DPFs can have the undesirable side-effect of increasing ultrafine particle (UFP) and nitrogen dioxide (NO2) emissions. While SCR systems can partially mitigate DPF-related NO2 increases, these systems can emit nitrous oxide (N2O), a potent greenhouse gas. We report new results from a study of HDDT emissions conducted in fall 2015 at the Port of Oakland and Caldecott Tunnel in California's San Francisco Bay Area. We report pollutant emission factors (g kg-1) for emitted NOx, NO2, BC, PM2.5, UFP, and N2O on a truck-by-truck basis. Using a roadside license plate recognition system, we categorize each truck by its engine model year and installed after-treatment controls. From this, we develop emissions profiles for trucks with and without DPF and SCR. We evaluate the effectiveness of these devices as a function of their age to determine whether degradation is an issue. We also compare the emission profiles of trucks traveling at low speeds along a level, arterial road en route to the port and at high speeds up a 4% grade highway approaching the tunnel. Given the climate impacts of BC and N2O, we also examine the global warming potential of emissions from trucks with and without DPF and SCR.

Evaluation of US rear underride guard regulation for large trucks using real-world crashes.

PubMed

Brumbelow, Matthew L; Blanar, Laura

2010-11-01

Current requirements for rear underride guards on large trucks are set by the National Highway Traffic Safety Administration in Federal Motor Vehicle Safety Standards (FMVSS) 223 and 224. The standards have been in place since 1998, but their adequacy has not been evaluated apart from two series of controlled crash tests. The current study used detailed reviews of real-world crashes from the Large Truck Crash Causation Study to assess the ability of guards that comply with certain aspects of the regulation to mitigate passenger vehicle underride. It also evaluated the dangers posed by underride of large trucks that are exempt from guard requirements. For the 115 cases meeting the inclusion criteria, coded data, case narratives, photographs, and measurements were used to examine the interaction between study vehicles. The presence and type of underride guard was determined, and its performance in mitigating underride was categorized. Overall, almost one-half of the passenger vehicles had underride damage classified as severe or catastrophic. These vehicles accounted for 23 of the 28 in which occupants were killed. For the cases involving trailers with underride guards compliant with one or both FMVSS, guard deformation or complete failure was frequent and most commonly due to weak attachments, buckling of the trailer chassis, or bending of the lateral end of the guard under narrow overlap loading. Most of the truck units studied qualified for at least one of the FMVSS exemptions. The two largest groups were trailers with small wheel setbacks and single-unit straight trucks. Dump trucks represented a particularly hazardous category of straight truck. The current study suggests several weaknesses in the rear underride guard regulation. The standard allows too much ground clearance, the quasi-static test conditions allow guard designs that fail in narrow overlap crashes, and certifying guards independent of trailers leads to systems with inadequate attachment and chassis strength. Additionally, the regulation should be expanded to cover a higher percentage of the large truck fleet.

Role of sensory and cognitive conspicuity in the prevention of collisions between motorcycles and trucks at T-intersections.

PubMed

Law, Teik Hua; Ghanbari, Mahshid; Hamid, Hussain; Abdul-Halin, Alfian; Ng, Choy Peng

2016-11-01

Motorcyclists are particularly vulnerable to injury in crashes with heavy vehicles due to substantial differences in vehicle mass, the degree of protection and speed. There is a considerable difference in height between motorcycles and trucks; motorcycles are viewed by truck drivers from downward angles, and shorter distances between them mean steeper downward angles. Hence, we anticipated that the effects of motorcycle conspicuity treatments would be different for truck drivers. Therefore, this study aims to evaluate the effects of motorcycle conspicuity treatments on the identification and detection of motorcycles by truck drivers. Two complementary experiments were performed; the first experiment assessed the impact of motorcycle sensory conspicuity on the ability of un-alerted truck drivers to detect motorcycles, and the second experiment assessed the motorcycle cognitive conspicuity to alerted truck drivers. The sensory conspicuity was measured in terms of motorcycle detection rates by un-alerted truck drivers when they were not anticipating a motorcycle within a realistic driving scene, while the cognitive conspicuity was determined by the time taken by alerted truck drivers to actively search for a motorcycle. In the first experiment, the participants were presented with 10 pictures and were instructed to report the kinds of vehicles that were presented in the pictures. Each picture was shown to the participants for 600ms. In the second experiment, the participants were presented with the same set of pictures and were instructed to respond by clicking the right button on a mouse as soon as they detected a motorcycle in the picture. The results indicate that the motorcycle detection rate increases, and the response time to search for a motorcycle decreases, as the distance between the targeted motorcycle and the viewer decreases. This is true regardless of the type of conspicuity treatment used. The use of daytime running headlights (DRH) was found to increase the detection rate and the identification of a motorcycle by a truck driver at a farther distance, but effect deteriorates as the distance decreases. The results show that the detection rate and the identification of a motorcyclist wearing a black helmet with a reflective sticker increases as the distance between the motorcycle and the truck decreases. We also found that a motorcyclist wearing a white helmet and a white outfit is more identifiable and detectable at both shorter and longer distances. In conclusion, although this study provides evidence that the use of appropriate conspicuity treatments enhances motorcycle conspicuity to truck drivers, we suggest that more attention should be paid to the effect of background environment on motorcycle conspicuity. Copyright © 2016. Published by Elsevier Ltd.

The heavy-duty vehicle future in the United States: A parametric analysis of technology and policy tradeoffs

DOE PAGES

Askin, Amanda Christine; Barter, Garrett; West, Todd H.; ...

2015-02-14

Here, we present a parametric analysis of factors that can influence advanced fuel and technology deployments in U.S. Class 7–8 trucks through 2050. The analysis focuses on the competition between traditional diesel trucks, natural gas vehicles (NGVs), and ultra-efficient powertrains. Underlying the study is a vehicle choice and stock model of the U.S. heavy-duty vehicle market. Moreover, the model is segmented by vehicle class, body type, powertrain, fleet size, and operational type. We find that conventional diesel trucks will dominate the market through 2050, but NGVs could have significant market penetration depending on key technological and economic uncertainties. Compressed naturalmore » gas trucks conducting urban trips in fleets that can support private infrastructure are economically viable now and will continue to gain market share. Ultra-efficient diesel trucks, exemplified by the U.S. Department of Energy's SuperTruck program, are the preferred alternative in the long haul segment, but could compete with liquefied natural gas (LNG) trucks if the fuel price differential between LNG and diesel increases. However, the greatest impact in reducing petroleum consumption and pollutant emissions is had by investing in efficiency technologies that benefit all powertrains, especially the conventional diesels that comprise the majority of the stock, instead of incentivizing specific alternatives.« less

On-Road Diesel Truck Emissions Measurement and Inventory Development in Chengdu City of China

NASA Astrophysics Data System (ADS)

Chen, J.; Ye, H.

2014-12-01

Real-world emission tests of three diesel trucks were conducted using SEMTECH-EcoStar gas analyzer produced by the US Sensors Company and Mi2 particle analyzer produced by the Finland Pegasor Company. The test duration was one day for each truck and 8813, 10407 and 11102 sets of effective post-processed data were collected for analyzing. The influence of vehicle speed, driving mode and vehicle mass on emission was analyzed and emission rates were calculated. Light-duty and heavy-duty truck activities in Chengdu were studied by survey and statistical analysis. The population of trucks was acquired from the Public Security Department of Sichuan province. Based on the test data and local collected data, this paper calculated an emission inventory of diesel trucks in Chengdu, the economic center of southwestern china. Results showed that the emission rates of CO, NO, THC and PM for the selected vehicles were（0.95~7.54）g/km,（1.03~3.97）g/km,（0.64~0.81）g/km and （0.01~0.07）g/km respectively. The annual vehicle activities of light-duty and heavy-duty trucks in Chengdu were 30,000 km and 44,000 km. The emission inventory of CO, NO, THC and PM in Chengdu were 23,000t/a, 15,000t/a, 4,000t/a and 200t/a.

Health survey of U.S. long-haul truck drivers: work environment, physical health, and healthcare access.

PubMed

Apostolopoulos, Yorghos; Sönmez, Sevil; Shattell, Mona M; Gonzales, Clifford; Fehrenbacher, Caitlin

2013-01-01

While trucking in industrialized nations is linked with driver health afflictions, the role of trucking in U.S. truckers' health remains largely unknown. This paper sheds light on links between the trucking work environment and drivers' physical health. Using a cross-sectional design, 316 truckers were enrolled in the Healthy Trucker Survey. Questions included work history, physical and mental health, and healthcare access. PASW 18 was used to examine patterns among factors. 316 truckers participated. Respondents were mainly full-time, long-haul drivers with over 5 years of experience, and who spent over 17 days on the road per month. While almost 75% described their health as good, 83.4% were overweight/obese, 57.9% had sleeping disturbances, 56.3% fatigue, 42.3% musculoskeletal disorders, and about 40% cardiovascular disease concerns. About 33% had no health insurance, 70% had no regular healthcare visits, 24.4% could not afford insurance, and 42.1% took over-the-counter drugs when sick, while 20.1% waited to reach home for medical care. Exercise facilities were unavailable in over 70% of trucking worksites and 70% of drivers did not exercise regularly. The trucking occupation places drivers at high risk for poor health outcomes. Prospective studies are needed to delve into how continued exposure to trucking influences the progression of disease burden.

76 FR 49527 - Joint Motor Carrier Safety Advisory Committee and Medical Review Board Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-10

... Task 11-03, regarding the Agency's Cross Border Trucking Pilot Program, will meet. Copies of all MCSAC... Trucking Pilot Program Task The MCSAC Subcommittee will continue its work on Task 11-03 concerning the... a meeting of the Cross-Border Trucking Pilot Program subcommittee. All three days of the meeting...

Odyne Plug-In Hybrid Electric Utility Truck Testing | Transportation

Science.gov Websites

Research | NREL Odyne Plug-In Hybrid Electric Utility Truck Evaluation Odyne Plug-In Hybrid data on plug-in hybrid electric utility trucks operated by a variety of companies. Photo courtesy of Odyne, NREL NREL is evaluating the in-service performance of about 120 plug-in hybrid electric utility

76 FR 68220 - Navistar Truck Development and Technology Center; a Subsidiary of Navistar International...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-03

... are engaged in activities related to the supply of truck body engineering and design services. During... supply of truck body engineering and design services and/or support services. Based on new information... because a significant number or proportion of workers at Navistar, Meyer Road TA-W-75,151 and Navistar...

New Report Compares Performance of Compressed Natural Gas Refuse Haulers to

Science.gov Websites

Diesel-Powered Trucks Report Compares Performance of Compressed Natural Gas Refuse Haulers to Diesel-Powered Trucks For more information contact: e:mail: Public Affairs A new report that compares the performance of compressed natural gas (CNG) refuse haulers in New York City to similar diesel-powered trucks

40 CFR 80.1641 - Alternative sulfur standards and requirements that apply to importers who transport gasoline by...

Code of Federal Regulations, 2014 CFR

2014-07-01

... requirements that apply to importers who transport gasoline by truck. 80.1641 Section 80.1641 Protection of... ADDITIVES Gasoline Sulfur § 80.1641 Alternative sulfur standards and requirements that apply to importers who transport gasoline by truck. Importers who import gasoline into the United States by truck may...

27 CFR 24.230 - Examination of tank car or tank truck.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Examination of tank car or... TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL WINE Spirits § 24.230 Examination of tank car or tank truck. Upon arrival of a tank car or tank truck at the bonded wine premises, the proprietor shall...

27 CFR 24.230 - Examination of tank car or tank truck.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Examination of tank car or... TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL WINE Spirits § 24.230 Examination of tank car or tank truck. Upon arrival of a tank car or tank truck at the bonded wine premises, the proprietor shall...

27 CFR 24.230 - Examination of tank car or tank truck.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Examination of tank car or... TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Spirits § 24.230 Examination of tank car or tank truck. Upon arrival of a tank car or tank truck at the bonded wine premises, the proprietor shall...

27 CFR 24.230 - Examination of tank car or tank truck.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Examination of tank car or... TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Spirits § 24.230 Examination of tank car or tank truck. Upon arrival of a tank car or tank truck at the bonded wine premises, the proprietor shall...

27 CFR 24.230 - Examination of tank car or tank truck.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Examination of tank car or... TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Spirits § 24.230 Examination of tank car or tank truck. Upon arrival of a tank car or tank truck at the bonded wine premises, the proprietor shall...

A Study of Truck Drivers and Their Job Performance Regarding Highway Safety

ERIC Educational Resources Information Center

Nafukho, Fredrick M.; Hinton, Barbara E.; Graham, Carroll M.

2007-01-01

Limited research has addressed the issue of truck drivers and their performance regarding highway safety in terms of reduced number of crashes per driver. The primary purpose of this study was to determine how tractor trailer truck drivers' job performance could be improved while at the same time ensuring increased revenue for the transportation…

75 FR 1110 - WTO Dispute Settlement Proceeding Regarding United States-Certain Measures Affecting Imports of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-08

... Light Truck Tires From China AGENCY: Office of the United States Trade Representative. ACTION: Notice... light truck tires from China. The request may be found at http://www.wto.org in document WT/DS399/2... duties imposed by the United States on certain passenger vehicle and light truck tires from China...

Alternative Fuels Data Center: V Garofalo Carting Cleans up New York With

Science.gov Websites

Natural Gas TrucksA> V Garofalo Carting Cleans up New York With Natural Gas Trucks to someone by up Long Island, New York, with compressed natural gas trucks. For information about this project and FuelEconomy.gov. Provided by Maryland Public Television Related Videos Photo of a car Hydrogen

Alternative Fuels Data Center: Coca-Cola Charges Forward With Hybrid

Science.gov Websites

Delivery TrucksA> Coca-Cola Charges Forward With Hybrid Delivery Trucks to someone by E-mail Coca-Cola uses hybrid electric vehicles in its fleet of delivery trucks. For information about this Television Related Videos Photo of a car Electric Vehicles Charge up at State Parks in West Virginia Dec. 9

49 CFR 393.128 - What are the rules for securing automobiles, light trucks and vans?

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 5 2013-10-01 2013-10-01 false What are the rules for securing automobiles, light... automobiles, light trucks and vans? (a) Applicability. The rules in this section apply to the transportation of automobiles, light trucks, and vans which individually weigh 4,536 kg. (10,000 lb) or less...

49 CFR 393.128 - What are the rules for securing automobiles, light trucks and vans?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false What are the rules for securing automobiles, light... automobiles, light trucks and vans? (a) Applicability. The rules in this section apply to the transportation of automobiles, light trucks, and vans which individually weigh 4,536 kg. (10,000 lb) or less...

49 CFR 393.128 - What are the rules for securing automobiles, light trucks and vans?

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 5 2012-10-01 2012-10-01 false What are the rules for securing automobiles, light... automobiles, light trucks and vans? (a) Applicability. The rules in this section apply to the transportation of automobiles, light trucks, and vans which individually weigh 4,536 kg. (10,000 lb) or less...

49 CFR 393.128 - What are the rules for securing automobiles, light trucks and vans?

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 5 2014-10-01 2014-10-01 false What are the rules for securing automobiles, light... automobiles, light trucks and vans? (a) Applicability. The rules in this section apply to the transportation of automobiles, light trucks, and vans which individually weigh 4,536 kg. (10,000 lb) or less...

49 CFR 393.128 - What are the rules for securing automobiles, light trucks and vans?

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 5 2011-10-01 2011-10-01 false What are the rules for securing automobiles, light... automobiles, light trucks and vans? (a) Applicability. The rules in this section apply to the transportation of automobiles, light trucks, and vans which individually weigh 4,536 kg. (10,000 lb) or less...

26 CFR 48.4221-3 - Tax-free sale of articles for export, or for resale by the purchaser to a second purchaser for...

Code of Federal Regulations, 2010 CFR

2010-04-01

.... manufacturer of trucks, sold a trash collection truck to Y, a company in France. The sale was tax free under section 4221(a)(2). The truck was sold by Y to the City of Nice, France. After initial use, the city...

49 CFR 230.100 - Defects in tender truck axles and journals.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Steam Locomotives and Tenders Running Gear § 230.100 Defects in tender truck axles and journals. (a... wheel seats that is more than 1/8 of an inch in depth. (b) Tender truck journal condemning defects... repaired : (1) Cut journals that cannot be made to run cool without turning; (2) Seams in axles causing...

Truck Noise X : Noise Reduction Options for Diesel Powered International Harvester Trucks : Volume 2. Cost-Noise Analysis and Field Installation.

DOT National Transportation Integrated Search

1977-04-01

Noise reduction option development work was carried out on two inservice diesel powered IH trucks, consisting of a Cab-over model and a Conventional model with a baseline exterior noise level of 87 dB(A) each. Since no specific noise goals were set, ...

76 FR 28731 - Hand Trucks and Certain Parts Thereof From the People's Republic of China; Extension of Time...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-18

... Parts Thereof From the People's Republic of China; Extension of Time Limit for Final Results of...- 2009 administrative review of the antidumping duty order on hand trucks and certain parts thereof from the People's Republic of China. See Hand Trucks and Certain Parts Thereof from the People's Republic...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, D.R.

The purpose of the Heavy Vehicle Propulsion System Materials Program is the development of materials: ceramics, intermetallics, metal alloys, and metal and ceramic coatings, to support the dieselization of class 1-3 trucks to realize a 35% fuel-economy improvement over current gasoline-fueled trucks and to support commercialization of fuel-flexible LE-55 low-emissions, high-efficiency diesel engines for class 7-8 trucks.

77 FR 14495 - Certain New Pneumatic Off-the-Road Tires From the People's Republic of China: Final Results of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-12

... counterbalanced lift truck is a rigid framed, engine- powered machine with lift arms that has additional weight...; \\7\\ (2) construction vehicles and equipment, including earthmover articulated dump products, rigid frame haul trucks,\\8\\ front end loaders,\\9\\ dozers,\\10\\ lift trucks, straddle carriers,\\11\\ graders,\\12...

Study on the Influence of the Convoy Rolling over Aerodynamic Resistance

NASA Astrophysics Data System (ADS)

Iozsa, D.; Stan, C.; Ilea, L.

2017-10-01

The aim of the study is to investigate how the aerodynamic resistance is influenced by the convoy rolling and to see how much this is possible by varying the distance between trucks. Then to see how the gains correlate with the position occupied by the truck in the convoy. The study starts from current research on the premises of running in convoy. Aerodynamic analysis was performed using software finite element of Computational Fluid Dynamics (CFD) type, where it was modeled the convoy rolling of a variable number of trucks. The number of trucks and the distance between them was varied in the model in order to acquire an understanding of the flow field around the trucks and how the distance between them can improve the aerodynamic parameters. The results are presented in the form of streamlines of the air, which indicates the air volume travel speed and direction and of the pressure distribution on the surface of the body. The most significant drop in pressure on the front surface was obtained for the second truck of the convoy, whereas for the following ones the reduction was less important. The participation in a convoy of more than two trucks is justified by the reduction of the whirls that appear and by the uniform air flow. The main advantage of running in convoy mode is to decrease aerodynamic resistance, with beneficial consequences on economic and ecological parameters. Continuing work from here on, it could be analyzed the impact of changing the distance between trucks on the aerodynamic coefficient. The results of CFD simulations need to be verified with experimental data, such as wind-tunnel test, to ensure reliability of the results.

Author Correction: Energy use and life cycle greenhouse gas emissions of drones for commercial package delivery.

PubMed

Stolaroff, Joshuah K; Samaras, Constantine; O'Neill, Emma R; Lubers, Alia; Mitchell, Alexandra S; Ceperley, Daniel

2018-03-08

In the original version of this Article, the first sentence of the sixth paragraph of the "Comparing emissions" section, the Results originally incorrectly read as 'In the base case, delivery of a small (0.5 kg) package with the small quadrotor drone has lower impacts than delivery by diesel truck, ranging from a 59% reduction in GHGs in California, to a 17% reduction in Missouri'. The correct version states '54%' instead of '59%' and '23%' instead of '17%'.The fourth sentence of the same paragraph originally incorrectly read as 'In the base case, delivery of a medium-sized (8 kg) package has 17% lower GHGs than delivery by truck in California, is about equivalent to delivery trucks for the U.S. average electricity mix, but has 77% higher GHGs than truck delivery in Missouri, which has a carbon-intensive electricity grid'. The correct version states 'In the base case, delivery of a medium-sized (8 kg) package has 9% lower GHGs than delivery by truck in California, is about 24% higher than delivery trucks for the U.S. average electricity mix, and has 50% higher GHGs than truck delivery in Missouri, which has a carbon-intensive electricity grid.The last sentence of the seventh paragraph of the same section originally incorrectly read as 'Because of the importance of electricity used to power the octocopter, charging with low-carbon electricity of 200 g GHG/kWh can reduce delivered package GHGs by 34% compared to diesel trucks'. The correct version states '37%' instead of '34%'.These errors have been corrected in both the PDF and HTML versions of the Article.

Particulate matters from diesel heavy duty trucks exhaust versus cigarettes emissions: a new educational antismoking instrument.

PubMed

De Marco, Cinzia; Ruprecht, Ario Alberto; Pozzi, Paolo; Munarini, Elena; Ogliari, Anna Chiara; Mazza, Roberto; Boffi, Roberto

2015-01-01

Indoor smoking in public places and workplaces is forbidden in Italy since 2003, but some health concerns are arising from outdoor secondhand smoke (SHS) exposure for non-smokers. One of the biggest Italian Steel Manufacturer, with several factories in Italy and abroad, the Marcegaglia Group, recently introduced the outdoor smoking ban within the perimeter of all their factories. In order to encourage their smoker employees to quit, the Marcegaglia management decided to set up an educational framework by measuring the PM1, PM2.5 and PM10 emissions from heavy duty trucks and to compare them with the emissions of cigarettes in an indoor controlled environment under the same conditions. The exhaust pipe of two trucks powered by a diesel engine of about 13.000/14.000 cc(3) were connected with a flexible hose to a hole in the window of a container of 36 m(3) volume used as field office. The trucks operated idling for 8 min and then, after adequate office ventilation, a smoker smoked a cigarette. Particulate matter emission was thereafter analyzed. Cigarette pollution was much higher than the heavy duty truck one. Mean of the two tests was: PM1 truck 125.0(47.0), cigarettes 231.7(90.9) p = 0.002; PM2.5 truck 250.8(98.7), cigarettes 591.8(306.1) p = 0.006; PM10 truck 255.8(52.4), cigarettes 624.0(321.6) p = 0.002. Our findings may be important for policies that aim reducing outdoor SHS exposure. They may also help smokers to quit tobacco dependence by giving them an educational perspective that rebuts the common alibi that traffic pollution is more dangerous than cigarettes pollution.

Ticketing aggressive cars and trucks (TACT): How does it work on city streets?

PubMed

Telford, Russell; Cook, Lawrence J; Olson, Lenora M

2018-02-17

The purpose of this study was to determine the feasibility of modifying the Ticking Aggressive Cars and Trucks (TACT) program, originally designed to work on state highways, within a metropolitan area to reduce unsafe interactions and their related crashes between drivers of large trucks and passenger vehicles. Using crash data, the driving behaviors most commonly associated with large truck and passenger vehicle crashes were identified. A public awareness campaign using media messaging and increased law enforcement was created targeting these associated behaviors. The frequency of these behaviors both before and after the public awareness campaign was determined through observation of traffic at 3 specific locations within the city. Each location had a sufficient volume of large truck and passenger traffic to observe frequent interactions. Pre- and postintervention data were compared using negative binomial regression with generalized estimating equations to evaluate whether the campaign was associated with a reduction in the identified driving behaviors. A comparison between crash data from before, during, and after the campaign and crashes during the same time periods in previous years did not show a significant difference (P =.081). The number of large trucks observed in traffic remained the same during pre- and postintervention periods (P =.625). The rates of negative interactions per 100 large trucks decreased for both large trucks and passenger vehicles after the intervention, with calculated rate ratios of 0.58 (95% confidence interval [CI], 0.48, 0.70) and 0.31 (95% CI, 0.20, 0.47). The greatest reduction was seen in passenger vehicles following too close, with a rate ratio of 0.21 (95% CI, 0.15, 0.30). Although designed for reducing crashes on highways, the TACT program can be an effective approach for improving driver behaviors on city streets.

Developing a model law restricting the transporting of passengers in the cargo areas of pickup trucks.

PubMed

Christoffel, T; Agran, P; Winn, D; Anderson, C; Del Valle, C

2000-01-01

Pickup trucks have become increasingly popular in the United States, accounting for about one in five vehicles involved in fatal motor-vehicle crashes. A critical factor in these deaths is the practice of carrying passengers in truck cargo areas, which are not designed for this purpose. Each year approximately 200 deaths occur to occupants riding in the back of pickup trucks. Over half the states have laws dealing with preventable injury problem, but these laws vary widely and most are too limited to be effective. We have reviewed existing laws, as well as crash injury data, and we have developed and recommend a model bill. The bill focuses on intended use, restricting passengers to only those portions of a vehicle designed for human transport. We have also conducted and report on a survey of legislative sponsors of pickup truck legislation.

[Persistent amphetamine consumption by truck drivers in São Paulo State, Brazil, despite the ban on production, prescription, and use].

PubMed

Oliveira, Lúcio Garcia de; Endo, Ligia Goes; Sinagawa, Daniele Mayumi; Yonamine, Maurício; Munoz, Daniel Romero; Leyton, Vilma

2013-09-01

Amphetamine use by truck drivers for occupational purposes is widely known. The production and consumption of amphetamines was banned by the Brazilian National Health Surveillance Agency (ANVISA) in October 2011. This study analyzes persistent amphetamine use by truck drivers since the ban was implemented. A convenience sample of 427 truck drivers was taken along highways in São Paulo State in 2012. Participants were asked to answer a structured questionnaire and provide a urine sample to screen for recent amphetamine consumption through toxicological analysis. Among the interviewed drivers, 7% had used some illicit drug recently and 2.7% had used amphetamines. Amphetamines are still consumed by truck drivers despite the risks and the recent ban. The authorities should thus monitor the possession and use of amphetamines by drivers in order to effectively enforce the ban.

Fatal injuries caused by logs rolling off trucks: Kentucky 1994-1998.

PubMed

Struttmann, T W; Scheerer, A L

2001-02-01

Logging is one of the most hazardous occupations and fatality rates are consistently among the highest of all industries. A review of fatalities caused by logs rolling off trucks is presented. The Kentucky Fatality Assessment and Control Evaluation Project is a statewide surveillance system for occupational fatalities. Investigations are conducted on selected injuries with an emphasis on prevention strategy development. Logging was an area of high priority for case investigation. During 1994-1998, we identified seven incidents in which a worker was killed by a log rolling off a truck at a sawmill, accounting for 15% of the 45 deaths related to logging activities. These cases were reviewed to identify similar characteristics and risk factors. Investigations led to recommendations for behavioral, administrative, and engineering controls. Potential interventions include limiting load height on trucks, installing unloading cages at sawmills and prohibiting overloaded trucks on public roadways. Copyright 2001 Wiley-Liss, Inc.

Speed correlation and emission of truck vehicles on dynamic conditions

NASA Astrophysics Data System (ADS)

Lutfie, M.; Samang, L.; Adisasmita, S. A.; Ramli, M. I.

2018-04-01

Concentration of CO2, NOx, smoke, CO, and HC released from several truck vehicles taken emission and speed data every 5 second through measurements using the mobile emission analyzer as an emission test vehicle that absorbs the gas from exhaust of sample vehicles. Implementation in field is to put emission test equipment on the right side of truck, which will absorb 5 gas compounds for 5 - 20 minutes with a view to knowing truck emissions of moving conditions by considering load factors. The sample vehicles are diesel-fueled trucks. From the research on gas emissions, it is generally found that the tendency that arises is the faster the vehicle speed then the CO2, NOx, Smoke, CO, and HC gases released will be greater or will increase as the vehicle speed increases. Thus, the relationship of CO2, NOx, smoke, CO, and HC concentration with vehicle speed is a linear relationship.

Design and Validation Testing of TruckScan to Assay Large Sacks of Fukushima Radioactive Debris on a Truck

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suzuki, Atsuo; Bronson, Frazier

As a result of the March 2011 earthquake and resulting tsunami in Japan, there was a serious accident at the Fukushima Dai-ichi Nuclear Power Plant. This accident has contaminated soil and vegetation in a wide area around the plant. Decontamination projects over the last 4 years have resulted in large numbers of 1 cubic meter canvas bags of debris, commonly called Super Sacks [SS]. These are currently stored nearby where they were generated, but starting in 2015, they will be moved to various Interim Storage Facilities [ISF]. Trucks will typically carry 8-20 of these SSs. When the trucks arrive atmore » the ISF they need to be rapidly sorted into groups according to radioactivity level, for efficient subsequent processing. Canberra Industries, Inc. [CI] has designed a new truck monitoring system 'TruckScan' for use at these ISFs. The TruckScan system must measure the entire truck loaded with multiple closely packed SSs, and generate a nuclide specific assay report showing the radioactivity in each individual SS. The Canberra-Japan office, along with Obayashi Corporation have performed validation testing to demonstrate to the regulatory authorities that the proposed technique was sufficiently accurate. These validation tests were conducted at a temporary storage area in Fukushima prefecture. Decontaminated waste of various representative types and of various levels of radioactivity was gathered and mixed to create homogeneous volumes. These volumes were sampled multiple times and assayed with laboratory HPGe detectors to determine the reference concentration of each pile. Multiple SSs were loaded from each pile. Some of the SSs were filled 50% full, others 75% full, and others 100% full, to represent the typical loading configuration of the existing SSs in the field. The content of the SSs are either sand, soil, or vegetation with densities ranging from 0.3 g/cc - 1.6 g/cc. These SSs with known concentrations of Cs-134 and Cs-137 were then loaded onto trucks in a variety of configurations, typical of how they might be on the real trucks. A partial system was installed at the site and used to assay these trucks with the various loading configurations. Whereas the full system will have 8 collimated 3 x 3'' NaI detectors, the test system only had two detectors; therefore the truck was moved and counted 4 times. The data were acquired and analyzed with the Canberra Genie software to determine the peak counts for both Cesium nuclides. That data was then analyzed with a prototype version of a Maximum Entropy algorithm, to determine the individual SS activity. The goal of the validation tests was to demonstrate that the system could detect 1000 Bq/kg in 15 seconds, and to determine how accurately it could quantify individual SSs. The validation tests demonstrated that the product would perform as predicted. The TruckScan results were consistent with the sample assay results [y = 1.0029 x, R{sup 2} = 0.914]. The Total Propagated Uncertainty, including both uncertainties from these tests and others that were estimated but not tested was 16.6% percent. (authors)« less

78 FR 7479 - Qualification of Drivers; Application for Exemptions; National Association of the Deaf

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-01

... Minnesota. He has driven intrastate for the past 14 years, including driving dump trucks and tractor trailer... CDL and drive heavy equipment such as a dump truck, or rig truck with a trailer, if granted an... DOT medical card. She would like to obtain a CDL and drive CMVs in interstate commerce, if granted an...

9 CFR 316.14 - Marking tank cars and tank trucks used in transportation of edible products.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Marking tank cars and tank trucks used in transportation of edible products. 316.14 Section 316.14 Animals and Animal Products FOOD SAFETY... CONTAINERS § 316.14 Marking tank cars and tank trucks used in transportation of edible products. Each tank...

Alternative Fuels Data Center: Sacramento Adds Regional Heavy-Duty LNG

Science.gov Websites

See how truckers in West Sacramento, California, are taking advantage of a new liquefied natural gas California Nov. 18, 2017 Photo of a car Smart Car Shopping Nov. 4, 2017 Photo of a truck Natural Gas Vehicles truck Idaho Transports Mail and Reduces Emissions with Natural Gas Trucks June 23, 2017 Photo of a bus

40 CFR 86.099-9 - Emission standards for 1999 and later model year light-duty trucks.

Code of Federal Regulations, 2011 CFR

2011-07-01

....099-9 Emission standards for 1999 and later model year light-duty trucks. (a)(1)(i)-(iii) [Reserved... 40 Protection of Environment 18 2011-07-01 2011-07-01 false Emission standards for 1999 and later model year light-duty trucks. 86.099-9 Section 86.099-9 Protection of Environment ENVIRONMENTAL...

40 CFR 86.004-9 - Emission standards for 2004 and later model year light-duty trucks.

Code of Federal Regulations, 2013 CFR

2013-07-01

....004-9 Emission standards for 2004 and later model year light-duty trucks. Section 86.004-9 includes... 40 Protection of Environment 19 2013-07-01 2013-07-01 false Emission standards for 2004 and later model year light-duty trucks. 86.004-9 Section 86.004-9 Protection of Environment ENVIRONMENTAL...

40 CFR 86.004-9 - Emission standards for 2004 and later model year light-duty trucks.

Code of Federal Regulations, 2012 CFR

2012-07-01

....004-9 Emission standards for 2004 and later model year light-duty trucks. Section 86.004-9 includes... 40 Protection of Environment 19 2012-07-01 2012-07-01 false Emission standards for 2004 and later model year light-duty trucks. 86.004-9 Section 86.004-9 Protection of Environment ENVIRONMENTAL...

40 CFR 86.004-9 - Emission standards for 2004 and later model year light-duty trucks.

Code of Federal Regulations, 2010 CFR

2010-07-01

....004-9 Emission standards for 2004 and later model year light-duty trucks. Section 86.004-9 includes... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Emission standards for 2004 and later model year light-duty trucks. 86.004-9 Section 86.004-9 Protection of Environment ENVIRONMENTAL...

40 CFR 86.004-9 - Emission standards for 2004 and later model year light-duty trucks.

Code of Federal Regulations, 2011 CFR

2011-07-01

....004-9 Emission standards for 2004 and later model year light-duty trucks. Section 86.004-9 includes... 40 Protection of Environment 18 2011-07-01 2011-07-01 false Emission standards for 2004 and later model year light-duty trucks. 86.004-9 Section 86.004-9 Protection of Environment ENVIRONMENTAL...

40 CFR 86.099-9 - Emission standards for 1999 and later model year light-duty trucks.

Code of Federal Regulations, 2010 CFR

2010-07-01

....099-9 Emission standards for 1999 and later model year light-duty trucks. (a)(1)(i)-(iii) [Reserved... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Emission standards for 1999 and later model year light-duty trucks. 86.099-9 Section 86.099-9 Protection of Environment ENVIRONMENTAL...

40 CFR 86.1811-09 - Emission standards for light-duty vehicles, light-duty trucks and medium-duty passenger vehicles.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 19 2011-07-01 2011-07-01 false Emission standards for light-duty vehicles, light-duty trucks and medium-duty passenger vehicles. 86.1811-09 Section 86.1811-09 Protection of... Vehicles § 86.1811-09 Emission standards for light-duty vehicles, light-duty trucks and medium-duty...

40 CFR 86.1811-10 - Emission standards for light-duty vehicles, light-duty trucks and medium-duty passenger vehicles.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 20 2013-07-01 2013-07-01 false Emission standards for light-duty vehicles, light-duty trucks and medium-duty passenger vehicles. 86.1811-10 Section 86.1811-10 Protection of... Vehicles § 86.1811-10 Emission standards for light-duty vehicles, light-duty trucks and medium-duty...

40 CFR 86.1811-10 - Emission standards for light-duty vehicles, light-duty trucks and medium-duty passenger vehicles.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 19 2011-07-01 2011-07-01 false Emission standards for light-duty vehicles, light-duty trucks and medium-duty passenger vehicles. 86.1811-10 Section 86.1811-10 Protection of... Vehicles § 86.1811-10 Emission standards for light-duty vehicles, light-duty trucks and medium-duty...

40 CFR 86.1811-09 - Emission standards for light-duty vehicles, light-duty trucks and medium-duty passenger vehicles.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 20 2013-07-01 2013-07-01 false Emission standards for light-duty vehicles, light-duty trucks and medium-duty passenger vehicles. 86.1811-09 Section 86.1811-09 Protection of... Vehicles § 86.1811-09 Emission standards for light-duty vehicles, light-duty trucks and medium-duty...

Review of Matters Related to the Death of Corporal Patrick Tillman, U.S. Army

DTIC Science & Technology

2007-03-26

34 or " jingle " truck). The jinga truck, driven by a local Afghan, was towing a fifth (inoperable) U.S. vehicle. After the split, Serial 1 traveled down...vehicle, with the assistance of a local " jingle " truck, to a pre-designated location for pick up. After the two Serials separated, and due to terrain

Impact of trucking network flow on preferred biorefinery locations in the southern United States

Treesearch

Timothy M. Young; Lee D. Han; James H. Perdue; Stephanie R. Hargrove; Frank M. Guess; Xia Huang; Chung-Hao Chen

2017-01-01

The impact of the trucking transportation network flow was modeled for the southern United States. The study addresses a gap in existing research by applying a Bayesian logistic regression and Geographic Information System (GIS) geospatial analysis to predict biorefinery site locations. A one-way trucking cost assuming a 128.8 km (80-mile) haul distance was estimated...

Joint Services Highway Shock Index Project

DTIC Science & Technology

1975-06-01

V (4 > t-t t-t » a> « a u >s 0 H (* M 4J <> % nt u a H pg 3 bo (3) 33M0J iOVdNI 30 i ^tiM*ft*Btlff? niif ^*^^ 9 TABLE IX VERTICAL IMPACT...DISTRIBUTION 40 46 60 73 I UST OF ILLUSTRATIONS Figure 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Truck Type I...Oie-Half Load, Truck Type II . Static Test, Three-Eighths Load, Truck Type II Static Test, One-Fourth Load, Truck Type II Page 5 6 6 8 9

Can cars and trucks coexist peacefully on highways? Analyzing the effectiveness of road safety policies in Europe.

PubMed

Castillo-Manzano, José I; Castro-Nuño, Mercedes; Fageda, Xavier

2015-04-01

We examine the impact on the traffic accident rate of the interaction between trucks and cars on Europe's roads using a panel data set that covers the period 1999-2010. We find that rising motorization rates for trucks lead to higher traffic fatalities, while rising motorization rates for cars do not. Empirically, the model we build predicts the positive impact of stricter speed limit legislation for trucks in the reduction of road fatalities. These findings lend support to European strategies and aimed at promoting alternative modes of freight transport, including rail and maritime transport. Copyright © 2015 Elsevier Ltd. All rights reserved.

Measuring Timber Truck Loads With Image Processing In Paper Mills

NASA Astrophysics Data System (ADS)

Silva, M. Santos; Carvalho, Fernando D.; Rodrigues, F. Carvalho; Goncalves, Ana N. R.

1989-04-01

The raw material for the paper industry is wood. To have an exact account of the stock of piled sawn tree trunks every truck load entering the plant's stockyard must be measured as to the amount of wood being brought in. Weighting down the trucks has its own problems, mainly, due to the high capacity of the tree trunks to absorb water. This problem is further enhanced when calculations must be made to arrive at the mass of sawn tree trunks which must go into the process of producing a certain quantity of paper pulp. The method presented here is based on two fixed cameras which take the image of the truck load. One takes a view of the trunks in order to get information on the average length of the tree trunks. The other obtains a side view which is digitised and by just discriminating against a grey level the area covered by the tree trunk cross section is measured. A simple arithmetic operation gives the volume of wood in the trunk. The same computer, a PC, will register the trucks particulars is almost independent of weather the wood is wet or dry and it serves trucks of any size.

Active living in the trucking sector: environmental barriers and health promotion strategies.

PubMed

Apostolopoulos, Yorghos; Shattell, Mona M; Sönmez, Sevil; Strack, Robert; Haldeman, Lauren; Jones, Victoria

2012-02-01

As one of the most underserved segments of the U.S. labor force, truck drivers have been associated with a series of morbid conditions intimately linked to their occupational milieux, their mostly unhealthful nutritional intake and sedentary lifestyles, and their resulting excess weight-gain. This paper reports data from a baseline assessment of 25 trucking work settings located around interstate highways I-40 and I-85 in North Carolina. It examines how the environmental attributes of these work settings influence the physical and recreational activity behaviors of truckers, compares findings with those from other occupational environments, and brings to the fore a new health promotion paradigm for trucking worksites. Findings support growing empirical and anecdotal evidence that trucking work settings remain not only active-living deserts, but overall unhealthful places. A scan of physical, social, and information environments within trucking worksites as well as physical environments of surrounding communities reveal only meager opportunities for physical and recreational activity for truckers. This paper places the highly underserved population of truckers firmly within the discourse of worksite health promotion, and calls for comprehensive multistakeholder wellness strategies that address a multitude of risk factors linked to the occupational context.

Regulating danger on the highways: hours of service regulations.

PubMed

Mansfield, Daniel; Kryger, Meir

2015-12-01

Current hours of service regulations governing commercial truck drivers in place in the United States, Canada, Australia, and the European Union are summarized and compared to facilitate the assessment of the effectiveness of such provisions in preventing fatigue and drowsiness among truck drivers. Current hours of service provisions governing commercial truck drivers were derived from governmental sources. The commercial truck driver hours of service provisions in the United States, Canada, and the European Union permit drivers to work 14 hours and those of Australia permit drivers to work 12 hours a day on a regular basis. The regulations do not state what a driver may do with time off. They are consistent with a driver being able to drive after 24 hours without sleep. They do not take into account circadian rhythm by linking driving or rest to time of day. Current hours of service regulations governing commercial truck drivers leave gaps--permitting drivers to work long hours on a regular basis, permitting driving after no sleep for 24 hours, and failing to take into account the importance of circadian rhythm, endangering the public safety and the truck drivers themselves. Copyright © 2015 National Sleep Foundation. Published by Elsevier Inc. All rights reserved.

Functional Quality Criterion of Rock Handling Mechanization at Open-pit Mines

NASA Astrophysics Data System (ADS)

Voronov, Yuri; Voronov, Artyoni

2017-11-01

Overburden and mining operations at open-pit mines are performed mainly by powerful shovel-truck systems (STSs). One of the main problems of the STSs is a rather low level of their operating quality, mainly due to unjustified over-trucking. In this article, a functional criterion for assessing the qualify of the STS operation at open-pit mines is formulated, derived and analyzed. We introduce the rationale and general principles for the functional criterion formation, its general form, as well as variations for various STS structures: a mixed truck fleet and a homogeneous shovel fleet, a mixed shove! fleet and a homogeneous truck fleet, mixed truck and shovel fleets. The possibility of assessing the quality of the STS operation is of great importance for identifying the main directions for improving their operational performance and operating quality, optimizing the main performance indicators by the qualify criterion, and. as a result, for possible saving of material and technical resources for open-pit mining. Improvement of the quality of the STS operation also allows increasing the mining safety and decreasing the atmosphere pollution - by means of possible reducing of the number of the operating trucks.

Quality improvement program for the B83 bomb hand truck

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loll, M.B.; Buck, S.A.

1998-04-01

This report describes the problems, issues, and history of the H1347 bomb hand truck for the B83 bomb after the bomb was put into stockpile in the mid-1980s. Major issues that were reported in Unsatisfactory Reports (URs) were cracking problems on stacking fixture welds, cracked welds on the caster bracket receptacles on the cradle, cracked caster mounting brackets, casters unlocking from the swivel lock position, and caster tires rubbing and binding on the stacking frame. Resolution of these and other problems is described. The introduction of the H695B storage-only bomb hand truck to alleviate a shortage of bomb hand trucksmore » in the mid-1990s is described. The development and qualification of the H1347A bomb hand truck as a replacement for the H695 B is covered. The results from load test evaluations on the stacking fixture, cradle, and casters for the H1347 are described along with towing results on one and two-high stack configurations of B83 bombs in bomb hand trucks. New towing and truck/trailer transport procedures are described. Development, evaluation, and production recommendations for a stronger caster mounting bracket are described.« less

Interstate Electrification Improvement Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Puckette, Margaret; Kim, Jeff

The Interstate Electrification Improvement Project, publicly known as the Shorepower Truck Electrification Project (STEP), started in May 2011 and ended in March 2015. The project grant was awarded by the Department of Energy’s Vehicles Technology Office in the amount of $22.2 million. It had three overarching missions: 1. Reduce the idling of Class 8 tractors when parked at truck stops, to reduce diesel fuel consumption and thus U.S. dependence on foreign petroleum; 2. Stimulate job creation and economic activity as part of the American Reinvestment and Recovery Act of 2009; 3. Reduce greenhouse gas emissions (GHG) from diesel combustion andmore » the carbon footprint of the truck transportation industry. The project design was straightforward. First, build fifty Truck Stop Electrification (TSE) facilities in truck stop parking lots across the country so trucks could plug-in to 110V, 220V, or 480VAC, and shut down the engine instead of idling. These facilities were strategically located at fifty truck stops along major U.S. Interstates with heavy truck traffic. Approximately 1,350 connection points were installed, including 150 high-voltage electric standby Transport Refrigeration Unit (eTRU) plugs--eTRUs are capable of plugging in to shore power1 to cool the refrigerated trailer for loads such as produce, meats and ice cream. Second, the project provided financial incentives on idle reduction equipment to 5,000 trucks in the form of rebates, to install equipment compatible with shore power. This equipment enables drivers to shut down the main engine when parked, to heat or cool their cab, charge batteries, or use other household appliances without idling—a common practice that uses approximately 1 gallon of diesel per hour. The rebate recipients were intended to be the first fleets to plug into Shorepower to save diesel fuel and ensure there is significant population of shore power capable trucks. This two part project was designed to complement each other by providing: 1) the infrastructure to plug into and 2) the on-board equipment capable of plugging into the infrastructure. This project generated the largest dataset to date on shore power TSE utilization and use patterns, providing: insight into driver behavior and acceptance; evidence of cost savings; experience with system operations and management; and data for guiding future development of shore power, whether as a private enterprise or a publicly-subsidized service for meeting air quality goals.« less

Impacts of Aging Emission Control Systems on In-Use Heavy-Duty Diesel Truck Emission Rates

NASA Astrophysics Data System (ADS)

Preble, C.; Cados, T.; Harley, R.; Kirchstetter, T.

2017-12-01

Heavy-duty diesel trucks are a major source of nitrogen oxides (NOx) and black carbon (BC) in urban environments, contributing to persistent ozone and particulate matter air quality problems. Recently, diesel particle filter (DPF) and selective catalytic reduction (SCR) emission control systems have become standard equipment on new trucks. Particle filters can also be installed as a retrofit on older engines. Prior work has shown that exhaust filters and SCR systems effectively reduce BC and NOx emission rates by up to 90 and 80%, respectively (Preble et al., ES&T 2015). There is concern, however, that DPFs may promote the formation of ultrafine particles (UFP) and increase tailpipe emissions of nitrogen dioxide (NO2). Additionally, urea-based SCR systems for NOx control may form nitrous oxide (N2O), an important contributor to stratospheric ozone depletion. The effectiveness of these emission controls has been thoroughly evaluated in the laboratory, but the long-term durability of in-use systems and their impacts on co-emitted species have not been well characterized. To evaluate the in-use performance of DPF and SCR systems, pollutant emissions from thousands of diesel trucks were measured over several years at the Port of Oakland and the Caldecott Tunnel in the San Francisco Bay Area. Pollutants present in the exhaust plumes of individual trucks were measured at high time resolution (≥1 Hz) as trucks passed under a mobile lab stationed on an overpass. Fuel-based emission factors (g pollutant emitted per kg fuel burned) were calculated for individual trucks and linked via recorded license plates to vehicle attributes, including engine model year and installed emission control systems. Use of DPFs reduced the BC emission rate by up to 95% at both locations. SCR systems were more effective at reducing NOx emissions under the uphill, highway driving conditions at the Caldecott Tunnel. The emission rates of co-emitted species NO2, UFP, and N2O depended on driving mode. Some DPFs on trucks with 2007-2009 model year engines showed deterioration or failure in filter performance, leading to higher BC emission rates compared to the average for trucks without filters. Emission inventories may underestimate total on-road emissions from diesel trucks, especially if particle filter failure rates continue to increase over time.

A comparison of pipeline versus truck transport of bio-oil.

PubMed

Pootakham, Thanyakarn; Kumar, Amit

2010-01-01

Biomass-based energy and fuels are receiving attention because they are considered carbon neutral; i.e. the amount of CO(2) released during combustion of this biomass is nearly the same as that taken up by the plants during their growth. Bio-oil is a dark viscous liquid consisting of hydrocarbons. These are produced by fast pyrolysis of biomass. "As-is" biomass material has a low energy density (MJ m(-3)), hence, the cost of transporting this energy is high. Bio-oil has a high energy density as compared to "as-is" biomass material, consequently it helps in reducing the cost of energy transport. This study compares the life cycle assessment of transportation of bio-oil by pipeline with that by truck. The scope of the work includes the transportation of bio-oil by truck or pipeline from a centralized plant (supplied with forest biomass) to an end-user. Two cases are studied for pipeline transport of bio-oil: the first case considers a coal-based electricity supply for pumping the bio-oil through a pipeline; the second case considers an electricity supply from a renewable resource. The two cases of pipeline transport are compared to two cases of truck transport (truck trailer and super B-train truck). The life cycle greenhouse gas (GHG) emissions from the pipeline transport of bio-oil for the two cases of electricity supply are 345 and 17 g of CO(2) m(-3) km(-1), respectively. Similar values for transport by trailer (capacity - 30 m(3)) and super B-train truck (capacity - 60 m(3)) are 89 and 60 g of CO(2) m(-3) km(-1), respectively. Energy input for bio-oil transport is 3.95 MJ m(-3) km(-1) by pipeline, 2.59 MJ m(-3) km(-1) by truck and 1.66 MJ m(-3) km(-1) by super B-train truck. The results show that GHG emissions in pipeline transport are largely dependent on the source of electricity (higher for coal-based electricity). Substituting 250 m(3) day(-1) of pipeline-transported bio-oil for coal-based electricity can mitigate about 5.1 million tonnes of CO(2) per year. Overall, this study gives a comprehensive life cycle assessment of bio-oil transport comparing pipeline and truck transport.

Toxoplasma gondii infection in interstate truck drivers: a case-control seroprevalence study.

PubMed

Alvarado-Esquivel, Cosme; Pacheco-Vega, Sandy Janet; Hernández-Tinoco, Jesús; Salcedo-Jáquez, Misael; Sánchez-Anguiano, Luis Francisco; Berumen-Segovia, Luis Omar; Rábago-Sánchez, Elizabeth; Liesenfeld, Oliver

2015-02-05

Infection with Toxoplasma gondii can be acquired via the ingestion of undercooked or raw meat containing tissue cysts, or via ingestion of water contaminated with oocysts. Professional long distance truck driving may have epidemiological importance for food-borne infections since drivers eat out of home and in places where hygiene and cooking practices are uncertain. We aimed to determine whether interstate truck drivers in Durango, Mexico have an increased risk of infection with T. gondii as indicated by seropositivity; and to determine the socio-demographic, work, clinical, and behavioral characteristics associated with T. gondii seropositivity in interstate truck drivers. Through a case-control study design, 192 truck drivers and 192 controls from the general population of the same region matched by gender and age were examined with enzyme-linked immunoassays for the presence of anti-Toxoplasma IgG and IgM antibodies. Socio-demographic, work, clinical and behavioral characteristics from the truck drivers were obtained. Anti-T. gondii IgG antibodies were found in 23 (12.0%) of 192 truck drivers and in 13 (6.8%) of 192 controls (OR = 21.0; 95% CI: 1.23-358.38; P = 0.002). Anti-T. gondii IgM antibodies were found in 7 (3.6%) cases and in 7 (3.6%) controls (P = 1.00). The seroprevalence of T. gondii infection was higher in drivers with reflex impairment than in those without this impairment (4/13, 30.8% vs 19/179, 10.6%, respectively; P = 0.05), and in drivers with hearing impairment than in those without this impairment (3/7, 42.9% vs 20/185, 10.8%, respectively; P = 0.03). Multivariate analysis of work and behavioral characteristics of truck drives showed positive associations of T. gondii exposure with trips to the south of Mexico (OR = 3.11; 95% CI: 1.02-9.44; P = 0.04) and consumption of horse meat (OR = 5.18; 95% CI: 1.62-16.55; P = 0.005). Results suggest that interstate truck drivers may have an increased risk for T. gondii infection, and that T. gondii exposure may be impacting neurological functions in truck drivers. Contributing factors for T. gondii exposure should be taken into account for the design of optimal prevention measures against T. gondii infection.

Effects of After-Treatment Control Technologies on Heavy-Duty Diesel Truck Emissions

NASA Astrophysics Data System (ADS)

Preble, C.; Dallmann, T. R.; Kreisberg, N. M.; Hering, S. V.; Harley, R.; Kirchstetter, T.

2015-12-01

Diesel engines are major emitters of nitrogen oxides (NOx) and the black carbon (BC) fraction of particulate matter (PM). Diesel particle filter (DPF) and selective catalytic reduction (SCR) emission control systems that target exhaust PM and NOx have recently become standard on new heavy-duty diesel trucks (HDDT). There is concern that DPFs may increase ultrafine particle (UFP) and total particle number (PN) emissions while reducing PM mass emissions. Also, the deliberate catalytic oxidation of engine-out NO to NO2 in continuously regenerating DPFs may lead to increased tailpipe emission of NO2 and near-roadway concentrations that exceed the 1-hr national ambient air quality standard. Increased NO2 emissions can also promote formation of ozone and secondary PM. We report results from ongoing on-road studies of HDDT emissions at the Port of Oakland and the Caldecott Tunnel in California's San Francisco Bay Area. Emission factors (g pollutant per kg diesel) were linked via recorded license plates to each truck's engine model year and installed emission controls. At both sites, DPF use significantly increased the NO2/NOx emission ratio. DPFs also significantly increased NO2 emissions when installed as retrofits on older trucks with higher baseline NOx emissions. While SCR systems on new trucks effectively reduce total NOx emissions and mitigate these undesirable DPF-related NO2 emissions, they also lead to significant emission of N2O, a potent greenhouse gas. When expressed on a CO2-equivalent basis, the N2O emissions increase offsets the fuel economy gain (i.e., the CO2 emission reduction) associated with SCR use. At the Port, average NOx, BC and PN emission factors from new trucks equipped with DPF and SCR were 69 ± 15%, 92 ± 32% and 66 ± 35% lower, respectively, than modern trucks without these emission controls. In contrast, at the Tunnel, PN emissions from older trucks retrofit with DPFs were ~2 times greater than modern trucks without DPFs. The difference could be related to engine temperature, with highway operation producing greater exhaust temperatures that promote UFP nucleation. These studies indicate that DPF and SCR use can mitigate air quality and climate impacts of diesel truck emissions through reductions in BC and NOx. However, increased emissions of N2O, NO2 and PN may offset some of the benefits.

Electrification Beyond Light Duty: Class 2b-3 Commercial Vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Birky, Alicia; Laughlin, Michael; Tartaglia, Katie

The class 2b-3 truck market covers a wide range of commercial truck applications across a half-million vehicle sales annually. This report collected public information and stakeholder input to assess the opportunity for electrification in this market. Although class 2b-3 pickup truck and van bodies are very similar to personal light vehicles, their functional requirements are quite different due to the demands of the commercial market. These demands vary by application and often vary from day to day for a single application. Fleet customers purchase these vehicles to perform a particular job for their business and are concerned about the overallmore » cost of doing that job. Therefore, the vehicles must meet the job requirements cost effectively. Customers also are sensitive to initial cost. Electrification offers the potential to reduce vehicle operating costs and possibly improve vehicle functionality. However, the current market for class 2b-3 electrified trucks is very small, and the trucks are costly. Increased production volumes are key to cost reductions and may be assisted by sharing components with larger or smaller truck classes. Expanding demand is also crucial and stakeholders identified several niche markets with duty cycles that are likely well-suited to electrified class 2b-3 trucks. To expand beyond these niches, class 2b-3 electric solutions must be robust, flexible, and adaptable in order to cover a wide range of vocations, applications, and duty cycles.« less

40 CFR 86.1717-99 - Emission control diagnostic system for 1999 and later light-duty vehicles and light-duty trucks.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Emission control diagnostic system for 1999 and later light-duty vehicles and light-duty trucks. 86.1717-99 Section 86.1717-99 Protection of... diagnostic system for 1999 and later light-duty vehicles and light-duty trucks. (a) The provisions of § 86...

40 CFR 86.1717-01 - Emission control diagnostic system for 1999 and later light-duty vehicles and light-duty trucks.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Emission control diagnostic system for 1999 and later light-duty vehicles and light-duty trucks. 86.1717-01 Section 86.1717-01 Protection of... diagnostic system for 1999 and later light-duty vehicles and light-duty trucks. (a) The provisions of § 86...

Sustaining Operational Maneuver in the Twenty-First Century

DTIC Science & Technology

2010-05-13

battalion had two truck companies, each with 48 trucks and trailers , a medical detachment, and a headquarters company. Attached service and truck...division in the attack.176 A reserve unit which managed a rolling ammunition transfer point with 20 trailers loaded with ammunition augmenting the...the 1st Infantry Division with four maneuver brigades and an aviation brigade. Completing reception , staging, onward movement, and integration is the

Learning for VMM + WTA Embedded Classifiers

DTIC Science & Technology

2016-03-31

enabling correct classification of each novel acoustic signal (generator, idle car , and idle truck). The classification structure requires, after...measured on our SoC FPAA IC. The test input is composed of signals from urban environment for 3 objects (generator, idle car , and idle truck...classifier results from a rural truck data set, an urban generator set, and urban idle car dataset. Solid lines represent our extracted background

40 CFR 86.000-9 - Emission standards for 2000 and later model year light-duty trucks.

Code of Federal Regulations, 2013 CFR

2013-07-01

....000-9 Emission standards for 2000 and later model year light-duty trucks. Section 86.000-9 includes...) and CO Model year Percentage 2002 40 2003 80 2004 100 Table A00-6—Useful Life Standards (G/MI) for... applicable model year's heavy light-duty trucks shall not exceed the applicable SFTP standards in table A00-6...

40 CFR 86.000-9 - Emission standards for 2000 and later model year light-duty trucks.

Code of Federal Regulations, 2012 CFR

2012-07-01

....000-9 Emission standards for 2000 and later model year light-duty trucks. Section 86.000-9 includes...) and CO Model year Percentage 2002 40 2003 80 2004 100 Table A00-6—Useful Life Standards (G/MI) for... applicable model year's heavy light-duty trucks shall not exceed the applicable SFTP standards in table A00-6...

40 CFR 86.1717-99 - Emission control diagnostic system for 1999 and later light-duty vehicles and light-duty trucks.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 19 2011-07-01 2011-07-01 false Emission control diagnostic system for 1999 and later light-duty vehicles and light-duty trucks. 86.1717-99 Section 86.1717-99 Protection of... diagnostic system for 1999 and later light-duty vehicles and light-duty trucks. (a) The provisions of § 86...

40 CFR 86.1717-01 - Emission control diagnostic system for 1999 and later light-duty vehicles and light-duty trucks.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 19 2011-07-01 2011-07-01 false Emission control diagnostic system for 1999 and later light-duty vehicles and light-duty trucks. 86.1717-01 Section 86.1717-01 Protection of... diagnostic system for 1999 and later light-duty vehicles and light-duty trucks. (a) The provisions of § 86...

A stump-to-truck cost estimating program for cable logging young-growth Douglas-fir

Treesearch

Chris B. LeDoux

1989-01-01

WCOST is a computer program designed to estimate the stump-to-truck logging cost of cable logging young-growth Douglas-fir. The program uses data from stand inventory, cruise data, and the logging plan for the tract in question to produce detailed stump-to-truck cost estimates for specific proposed timber sales. These estimates are then used, in combination with...

Alternative Fuels Data Center: Maryland Conserves Fuel With Hybrid Trucks

Science.gov Websites

reducing fuel consumption, engine noise, and greenhouse gas emissions with hybrid trucks. For information of a car Electric Vehicles Charge up at State Parks in West Virginia Dec. 9, 2017 Photo of a car Smart Car Shopping Nov. 4, 2017 Photo of a truck Natural Gas Vehicles Make a Difference in Tennessee Oct

Alternative Fuels Data Center: Glacier-Waterton Park Powers Buses With

Science.gov Websites

Photo of a truck Natural Gas Fuels School Buses and Refuse Trucks in Tulsa, Oklahoma Feb. 18, 2017 Photo of buses Baton Rouge School District Adds Propane Buses to Its Fleet Dec. 23, 2016 photo of a truck Buses to Its Fleet Nov. 11, 2016 photo of a propane school bus Propane Powers School Buses in Tuscaloosa

26 CFR 145.4051-1 - Imposition of tax on heavy trucks and trailers sold at retail.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 17 2010-04-01 2010-04-01 false Imposition of tax on heavy trucks and trailers sold at retail. 145.4051-1 Section 145.4051-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF... THE HIGHWAY REVENUE ACT OF 1982 (PUB. L. 97-424) § 145.4051-1 Imposition of tax on heavy trucks and...

Work schedules of long-distance truck drivers before and after 2004 hours-of-service rule change.

PubMed

McCartt, Anne T; Hellinga, Laurie A; Solomon, Mark G

2008-01-01

Federal rules regulate work hours of interstate commercial truck drivers. On January 4, 2004, a new work rule was implemented, increasing daily and weekly maximum driving limits and daily off-duty requirements. The present study assessed changes in long-distance truck drivers' reported work schedules and reported fatigued driving after the rule change. Associations between reported rule violations, fatigued driving, and schedule as well as other characteristics were examined. Samples of long-distance truck drivers were interviewed face-to-face in two states immediately before the rule change (November-December 2003) and about 1 year (November-December 2004) and 2 years (November-December 2005) after the change. Drivers reported substantially more hours of driving after the rule change. Most drivers reported regularly using a new restart provision, which permits a substantial increase in weekly driving. Reported daily off-duty and sleep time increased. Reported incidents of falling asleep at the wheel of the truck increased between 2003 (before the rule change) and 2004 and 2005 (after the change); in 2005 about one fifth of drivers reported falling asleep at the wheel in the past month. The frequency of reported rule violations under the old and new rules was similar. The percentage of trucks with electronic on-board recorders increased significantly to almost half the fleet; only a few drivers were using automated recorders to report rule compliance. More than half of drivers said that requiring automated recorders on all large trucks to enforce driving-hour limits would improve compliance with work rules. Based on the 2004-2005 survey data, drivers who reported more frequent rule violations were significantly more likely to report fatigued driving. Predictors of reported violations included having unrealistic delivery schedules, longer wait times to drop off or pick up loads, difficulty finding a legal place to stop or rest, and driving a refrigerated trailer. Reported truck driver fatigue increased after the new rule was implemented, suggesting that the rule change may not have achieved the goal of reducing fatigued driving. Reported violations of the work rules remain common. Because many trucks already have electronic recorders, requiring them as a means of monitoring driving hours appears feasible.

The trucker strain monitor: an occupation-specific questionnaire measuring psychological job strain.

PubMed

De Croon, E M; Blonk, R W; Van der Beek, J; Frings-Dresen, M H

2001-08-01

To develop and validate a short and user-friendly questionnaire measuring psychological job strain in truck drivers. In cooperation with an occupational physician in the Dutch road transport industry we developed items on the basis of face validity and information of existing questionnaires on the subject. These items were pilot-tested, by means of interviews, in 15 truck drivers. Study I examined the factorial structure of the initial 30-item trucker strain monitor (TSM) in a sample of 153 truck drivers. Subsequently, number of items per factor was reduced on the basis of reliability analyses (Cronbach's alpha). Study II examined construct and criterion validity of the TSM in a randomly selected group of 2,000 truck drivers, of whom 1,111 participated (adjusted response = 63%). Additionally, sensitivity and specificity were assessed by examining the ability of the TSM to identify truck drivers with or without self-reported sickness absence in the past 12 months because of psychological complaints. Factor analyses of the initial 30-item TSM revealed a two-factor solution. Item reduction resulted in a six-item work-related fatigue scale and four-item sleeping problems scale with high internal consistency. Results of study II confirmed the internal consistency of the TSM scales and provided support for construct and criterion validity. The composite, work-related fatigue, and sleeping problems scale had a sensitivity of 83%, 80% and 71% respectively, in identifying truck drivers with prior sickness absence because of psychological complaints. Specificity rates were 72%, 73% and 72% respectively. Despite methodological limitations, the results suggest that the TSM is a reliable and valid indicator of psychological job strain in truck drivers. In particular, the composite and work-related fatigue scale identified drivers with prior absenteeism because of psychological complaints, quite accurately. Future longitudinal research in specific sub-groups of truck drivers including both self-reported and objective psychological health measures should evidence whether (1) the distinction between two indicators of psychological job strain is useful, and whether (2) the TSM can be used in screening out truck drivers at risk of developing psychological health problems.

Driving an Industry: Medium and Heavy Duty Fuel Cell Electric Truck Component Sizing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kast, James; Marcinkoski, Jason; Vijayagopal, Ram

Medium and heavy duty (MD and HD respectively) vehicles are responsible for 26 percent of the total U.S. transportation petroleum consumption [1]. Hydrogen fuel cells have demonstrated value as part of a portfolio of strategies for reducing petroleum use and emissions from MD and HD vehicles. [2] [3], but their performance and range capabilities, and associated component sizing remain less clear when compared to other powertrains. This paper examines the suitability of converting a representative sample of MD and HD diesel trucks into Fuel Cell Electric Trucks (FCETs), while ensuring the same truck performance, in terms of range, payload, acceleration,more » speed, gradeability and fuel economy.« less

Supplying of Assembly Lines Using Train of Trucks

NASA Astrophysics Data System (ADS)

Čujan, Zdeněk; Fedorko, Gabriel

2016-11-01

The typical supply system conceptions, i.e. the concepts "Just-in-time" (JIT) and "Just-in-sequence" (JIS) are very important factors with regard to a fluent operation of the assembly lines. Therefore the contemporary intra plant transport systems are being replaced by a new kind of the transportation technology, namely by means of the trains of trucks. The trains of trucks are used in two possible operational modes: either with a driver or without driver (fully automated). The trucks of the logistic trains are also cheaper and they are able to carry a larger volume and mass of the material at once. There are reduced in this way not only the investment costs, but also the operational expenses.

Commercial Truck Driver Health and Safety: Exploring Distracted Driving Performance and Self-Reported Driving Skill.

PubMed

Stavrinos, Despina; Heaton, Karen; Welburn, Sharon C; McManus, Benjamin; Griffin, Russell; Fine, Philip R

2016-08-01

Reducing distracters detrimental to commercial truck driving is a critical component of improving the safety performance of commercial drivers, and makes the highways safer for all drivers. This study used a driving simulator to examine effects of cell phone, texting, and email distractions as well as self-reported driver optimism bias on the driving performance of commercial truck drivers. Results revealed that more visually demanding tasks were related to poorer driving performance. However, the cell phone task resulted in less off-the-road eye glances. Drivers reporting being "very skilled" displayed poorer driving performance than those reporting being "skilled." Onboard communication devices provide a practical, yet visually and manually demanding, solution for connecting drivers and dispatchers. Trucking company policies should minimize interaction between dispatchers and drivers when the truck is in motion. Training facilities should integrate driving simulators into the instruction of commercial drivers, targeting over-confident drivers. © 2016 The Author(s).

An extended car-following model considering the appearing probability of truck and driver's characteristics

NASA Astrophysics Data System (ADS)

Rong, Ying; Wen, Huiying

2018-05-01

In this paper, the appearing probability of truck is introduced and an extended car-following model is presented to analyze the traffic flow based on the consideration of driver's characteristics, under honk environment. The stability condition of this proposed model is obtained through linear stability analysis. In order to study the evolution properties of traffic wave near the critical point, the mKdV equation is derived by the reductive perturbation method. The results show that the traffic flow will become more disorder for the larger appearing probability of truck. Besides, the appearance of leading truck affects not only the stability of traffic flow, but also the effect of other aspects on traffic flow, such as: driver's reaction and honk effect. The effects of them on traffic flow are closely correlated with the appearing probability of truck. Finally, the numerical simulations under the periodic boundary condition are carried out to verify the proposed model. And they are consistent with the theoretical findings.

Risks endemic to long-haul trucking in North America: strategies to protect and promote driver well-being.

PubMed

Apostolopoulos, Yorghos; Lemke, Michael; Sönmez, Sevil

2014-01-01

Long-haul truck drivers in North America function in a work context marked by excess physical and psychological workload, erratic schedules, disrupted sleep patterns, extreme time pressures, and these factors' far-reaching consequences. These work-induced stressors are connected with excess risk for cardiometabolic disease, certain cancers, and musculoskeletal and sleep disorders, as well as highway crashes, which in turn exert enormous financial burdens on trucking and warehousing companies, governments and healthcare systems, along with working people within the sector. This article: 1) delineates the unique work environment of long-haul truckers, describing their work characteristics and duties; (2) discusses the health hazards of long-haul trucking that impact drivers, the general population, and trucking enterprises, examining how this work context induces, sustains, and exacerbates these hazards; and (3) proposes comprehensive, multi-level strategies with potential to protect and promote the health, safety, and well-being of truckers, while reducing adverse consequences for companies and highway safety.

Optimizing the admission time of outbound trucks entering a cross-dock with uniform arrival time by considering a queuing model

NASA Astrophysics Data System (ADS)

Motaghedi-Larijani, Arash; Aminnayeri, Majid

2017-03-01

Cross-docking is a supply-chain strategy that can reduce transportation and inventory costs. This study is motivated by a fruit and vegetable distribution centre in Tehran, which has cross-docks and a limited time to admit outbound trucks. In this article, outbound trucks are assumed to arrive at the cross-dock with a single outbound door with a uniform distribution (0,L). The total number of assigned trucks is constant and the loading time is fixed. A queuing model is modified for this situation and the expected waiting time of each customer is calculated. Then, a curve for the waiting time is calculated. Finally, the length of window time L is optimized to minimize the total cost, which includes the waiting time of the trucks and the admission cost of the cross-dock. Some illustrative examples of cross-docking are presented and solved using the proposed method.

'Part of the job': male-to-male sexual experiences and abuse of young men working as 'truck cleaners' along the highways of Pakistan.

PubMed

de Lind van Wijngaarden, Jan Willem; Schunter, Bettina T

2014-01-01

As part of a study on the sexual health and social protection needs of men who have sex with men in Pakistan, 11 young men employed as assistants to truckers ('truck cleaners') who acknowledged having had sexual experiences with men, were interviewed and their social background and sexual initiation and their subsequent sexual lives were explored. For most truck cleaners, the first instance of sexual contact between the truck cleaner and the driver was forced and happened at an early age. Sex with other men, as well as with women (including sex workers) was widely reported. Drug and alcohol use was common. There is strong potential for HIV and STIs to spread through these sexual networks. Measures to prevent young men from entering into a career as truck helpers should be considered, as well as interventions to improve the health and social situation of those already employed.

Weight and volume variation in truckloads of logs hauled in the central Appalachians

Treesearch

Floyd G. Timson

1974-01-01

Variation in volume and weight was found among loaded log trucks even when such factors as truck type, logging job, and driver influence were eliminated. A load range of 10,000 pounds or 1,000 board feet was commonplace for the same truck, driver, and cutting site. Differences in log size, shape, weight, and species caused a major share of this variation. Yet,...

Alternative Fuels Data Center: AT&T Fleet Reaches Milestone of 8,000 CNG

Science.gov Websites

received its 8,000th compressed natural gas vehicle and now has a total of 10,000 various alternative fuel , 2017 Photo of a truck Natural Gas Vehicles Make a Difference in Tennessee Oct. 28, 2017 Image of an Biodiesel Aug. 26, 2017 Photo of a truck Idaho Transports Mail and Reduces Emissions with Natural Gas Trucks

40 CFR 86.709-94 - In-use emission standards for 1994 and later model year light-duty trucks.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Model Year Light-Duty Vehicles and Light-Duty Trucks § 86.709-94 In-use emission standards for 1994 and... exhaust emissions from 1994 and later model year light light-duty trucks shall meet all standards in... standards in tables H94-9 and H94-10. (ii) For model years 1996 and 1997, a minimum of the percentages shown...

40 CFR 86.709-94 - In-use emission standards for 1994 and later model year light-duty trucks.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Model Year Light-Duty Vehicles and Light-Duty Trucks § 86.709-94 In-use emission standards for 1994 and... exhaust emissions from 1994 and later model year light light-duty trucks shall meet all standards in... standards in tables H94-9 and H94-10. (ii) For model years 1996 and 1997, a minimum of the percentages shown...

40 CFR 86.709-94 - In-use emission standards for 1994 and later model year light-duty trucks.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Model Year Light-Duty Vehicles and Light-Duty Trucks § 86.709-94 In-use emission standards for 1994 and... exhaust emissions from 1994 and later model year light light-duty trucks shall meet all standards in... standards in tables H94-9 and H94-10. (ii) For model years 1996 and 1997, a minimum of the percentages shown...

40 CFR 86.709-94 - In-use emission standards for 1994 and later model year light-duty trucks.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Model Year Light-Duty Vehicles and Light-Duty Trucks § 86.709-94 In-use emission standards for 1994 and... exhaust emissions from 1994 and later model year light light-duty trucks shall meet all standards in... standards in tables H94-9 and H94-10. (ii) For model years 1996 and 1997, a minimum of the percentages shown...

Work, sleep, and cholesterol levels of U.S. long-haul truck drivers

PubMed Central

LEMKE, Michael K.; APOSTOLOPOULOS, Yorghos; HEGE, Adam; WIDEMAN, Laurie; SÖNMEZ, Sevil

2016-01-01

Long-haul truck drivers in the United States experience elevated cardiovascular health risks, possibly due to hypercholesterolemia. The current study has two objectives: 1) to generate a cholesterol profile for U.S. long-haul truck drivers; and 2) to determine the influence of work organization characteristics and sleep quality and duration on cholesterol levels of long-haul truck drivers. Survey and biometric data were collected from 262 long-haul truck drivers. Descriptive analyses were performed for demographic, work organization, sleep, and cholesterol measures. Linear regression and ordinal logistic regression analyses were conducted to examine for possible predictive relationships between demographic, work organization, and sleep variables, and cholesterol outcomes. The majority (66.4%) of drivers had a low HDL (<40 mg/dL), and nearly 42% of drivers had a high-risk total cholesterol to HDL cholesterol ratio. Sleep quality was associated with HDL, LDL, and total cholesterol, and daily work hours were associated with LDL cholesterol. Workday sleep duration was associated with non-HDL cholesterol, and driving experience and sleep quality were associated with cholesterol ratio. Long-haul truck drivers have a high risk cholesterol profile, and sleep quality and work organization factors may induce these cholesterol outcomes. Targeted worksite health promotion programs are needed to curb these atherosclerotic risks. PMID:28049935

Influences on Energy Savings of Heavy Trucks Using Cooperative Adaptive Cruise Control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lammert, Michael P; McAuliffe, Brian; Lu, Xiao-Yun

An integrated adaptive cruise control (ACC) and cooperative ACC (CACC) was implemented and tested on three heavy-duty tractor-trailer trucks on a closed test track. The first truck was always in ACC mode, and the followers were in CACC mode using wireless vehicle-vehicle communication to augment their radar sensor data to enable safe and accurate vehicle following at short gaps. The fuel consumption for each truck in the CACC string was measured using the SAE J1321 procedure while travelling at 65 mph and loaded to a gross weight of 65,000 lb, demonstrating the effects of: inter-vehicle gaps (ranging from 3.0 smore » or 87 m to 0.14 s or 4 m, covering a much wider range than previously reported tests), cut-in and cut-out maneuvers by other vehicles, speed variations, the use of mismatched vehicles (standard trailers mixed with aerodynamic trailers with boat tails and side skirts), and the presence of a passenger vehicle ahead of the platoon. The results showed that energy savings generally increased in a non-linear fashion as the gap was reduced. The middle truck saved the most fuel at gaps shorter than 12 m and the trailing truck saved the most at longer gaps, while lead truck saved the least at all gaps. The cut-in and cut-out maneuvers had only a marginal effect on fuel consumption even when repeated every two miles. The presence of passenger-vehicle traffic had a measurable impact. The fuel-consumption savings on the curves was less than on the straight sections.« less

The GREET Model Expansion for Well-to-Wheels Analysis of Heavy-Duty Vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cai, Hao; Burnham, Andrew; Wang, Michael

2015-05-01

Heavy-duty vehicles (HDVs) account for a significant portion of the U.S. transportation sector’s fuel consumption, greenhouse gas (GHG) emissions, and air pollutant emissions. In our most recent efforts, we expanded the Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREETTM) model to include life-cycle analysis of HDVs. In particular, the GREET expansion includes the fuel consumption, GHG emissions, and air pollutant emissions of a variety of conventional (i.e., diesel and/or gasoline) HDV types, including Class 8b combination long-haul freight trucks, Class 8b combination short-haul freight trucks, Class 8b dump trucks, Class 8a refuse trucks, Class 8a transit buses, Classmore » 8a intercity buses, Class 6 school buses, Class 6 single-unit delivery trucks, Class 4 single-unit delivery trucks, and Class 2b heavy-duty pickup trucks and vans. These vehicle types were selected to represent the diversity in the U.S. HDV market, and specific weight classes and body types were chosen on the basis of their fuel consumption using the 2002 Vehicle Inventory and Use Survey (VIUS) database. VIUS was also used to estimate the fuel consumption and payload carried for most of the HDV types. In addition, fuel economy projections from the U.S. Energy Information Administration, transit databases, and the literature were examined. The U.S. Environmental Protection Agency’s latest Motor Vehicle Emission Simulator was employed to generate tailpipe air pollutant emissions of diesel and gasoline HDV types.« less

Lung cancer in heavy equipment operators and truck drivers with diesel exhaust exposure in the construction industry.

PubMed

Järvholm, B; Silverman, D

2003-07-01

Several studies indicate that truck drivers have an increased risk of lung cancer, but few studies have examined lung cancer risk in heavy equipment operators. Workers in both occupations are exposed to diesel exhaust. To examine the incidence and mortality from lung cancer among truck drivers and among drivers of heavy vehicles. A computerised register of Swedish construction workers participating in health examinations between 1971 and 1992 was used. Male truck drivers (n = 6364) and drivers of heavy construction vehicles (n = 14 364) were selected as index groups; carpenters/electricians constituted the reference group (n = 119 984). Operators of heavy construction equipment experienced no increased risk of lung cancer compared to risk among the carpenter/electrician referents (61 cases v 70.1 expected). However, a significant inverse trend risk with increasing use of cabins was apparent. Truck drivers had increased risks of cancer of the lung (61 cases v 47.3 expected) and prostate (124 cases v 99.7 expected), although only mortality for lung cancer was significantly increased. Comparisons with the general population showed similar results. Results are consistent with those of previous studies suggesting that heavy equipment operators with potential exposure to diesel exhaust may have little or no increased risk of lung cancer, although the use of cabins seemed to decrease the risk of lung cancer. The results for truck drivers are also consistent with previous reports of increased lung cancer risk among truck drivers exposed to diesel exhaust, as well as recent reports linking diesel exhaust exposure to prostate cancer.

Could Expanded Freight Rail Reduce Air Pollution from Trucks?

NASA Astrophysics Data System (ADS)

Bickford, E. E.; Holloway, T.; Johnston, M.

2010-12-01

Cars, trucks and trains are a significant source of emissions that impact both climate and air quality on regional to global scales. Diesel vehicles, most used for freight transport, account for 42% of on-road nitrogen oxide emissions, 58% of on-road fine particulate emissions, and 21% of on-road carbon dioxide emissions. With freight tonnage projected to increase 28% by 2018, and freight trucks the fastest growing source of transportation emissions, we evaluate the potential for increased rail capacity to reduce the environmental impacts of trucks. Most widely available mobile source emissions inventories contain insufficient spatial detail to quantify realistic emission scenario options, and none to date have been linked with commodity flow information in a manner appropriate to consider the true potential of rail substitution. To support a truck-to-rail analysis, and other policy assessments requiring roadway-by-roadway analysis, we have developed a freight emissions inventory for the Upper Midwest based on the Federal Highway Administration’s Freight Analysis Framework version 2.2 and the Environmental Protection Agency’s on-road emissions model, Mobile6.2. Using a Geographical Information System (GIS), we developed emissions scenarios for truck-to-rail modal shifts where 95% of freight tonnage on trips longer than 400 miles is shifted off of trucks and onto railways. Scenarios will be analyzed with the Community Multiscale Air Quality (CMAQ) regional model to assess air quality impacts of associated changes. By using well-respected transportation data and realistic assumptions, results from this study have the potential to inform decisions on transportation sustainability, carbon management, public health, and air quality.

Characterization of the chemical composition of PM2.5 emitted from on-road China III and China IV diesel trucks in Beijing, China.

PubMed

Wu, Bobo; Shen, Xianbao; Cao, Xinyue; Yao, Zhiliang; Wu, Yunong

2016-05-01

The composition of diesel exhaust fine particulate matter (PM2.5) is of growing interest because of its impacts on health and climatic factors and its application in source apportionment and aerosol modeling. We characterized the detailed chemical composition of the PM2.5, including the organic carbon (OC), elemental carbon (EC), water-soluble ions (WSIs), and elemental contents, emitted from China III and China IV diesel trucks (nine each) based on real-world measurements in Beijing using a portable emissions measurement system (PEMS). Carbonaceous compounds were the dominant components (totaling approximately 87%) of the PM2.5, similar to the results (greater than 80% of the PM2.5) of our previous study of on-road China III diesel trucks. In general, the amounts of individual component groups (carbonaceous compounds, WSIs, and elements) and PM2.5 emissions for China IV diesel trucks were lower than those of China III diesel trucks of the same size, except for the WSIs and elements for the light- and medium-duty diesel trucks. The EC/OC mass ratios were strongly dependent on the emission standards, and the ratios of China IV diesel trucks were higher than those of China III diesel trucks of the same size. The chemical species in the PM2.5 were significantly affected by the driving conditions. Overall, the emission factors (EFs) of the PM2.5 and OC under non-highway (NHW) driving conditions were higher than those under highway (HW) driving conditions, and the EC/OC mass ratios presented an increasing trend, with decreasing OC/PM2.5 and increasing EC/PM2.5 from NHW to HW driving conditions; similar trends were reported in our previous study. In addition, Pearson's correlation coefficients among the PM2.5 species were analyzed to determine the relationships among the various chemical components. Copyright © 2016 Elsevier B.V. All rights reserved.

Elemental carbon and PM(2.5 )levels in an urban community heavily impacted by truck traffic.

PubMed Central

Lena, T Suvendrini; Ochieng, Victor; Carter, Majora; Holguín-Veras, José; Kinney, Patrick L

2002-01-01

Hunts Point, a 690-acre peninsula in the South Bronx, New York City, is a hub in the tristate (New York, New Jersey, and Connecticut) freight transportation system. This study was carried out in response to community concerns about potential health effects of exposure to diesel exhaust particulate (DEP). We measured particulate matter < 2.5 microm in aerodynamic diameter (PM(2.5)) and elemental carbon (EC) on sidewalks and tested whether spatial variations in concentrations were related to local truck traffic density. Ten-hour integrated air samples for EC and PM(2.5) were collected for 9 days over a 3-week period in the summer of 1999 at seven geographically distinct intersections. Simultaneous traffic counts were carried out for each sampling event. Traffic was classified into three classes: passenger cars, small trucks, and large trucks (diesel vehicles). Mean diesel vehicle volumes ranged from 9.3 to 276.5 vehicles/hr across sites. Mean EC concentrations by site ranged from 2.6 microg/m(3) at the control site to 7.3 microg/m(3) along a designated truck route. Linear regression of site-specific mean EC concentration on mean large truck counts predicted an increase of 1.69 microg/m(3) EC per 100 large trucks/hr (SE = 0.37; p = 0.01; R(2) = 0.84). Average PM(2.5) concentrations by site ranged 1.6-fold (19.0-29.9 microg/m(3)) and were more weakly associated with local traffic. Variations over time for PM(2.5 )were more pronounced, ranging almost 4-fold (8.9-34.4 microg/m(3)). These results show that airborne EC concentrations, an important component of DEP, are elevated in Hunts Point and that the impact varies across the community as a function of large truck traffic. PMID:12361926

Lateral Stability Simulation of a Rail Truck on Roller Rig

NASA Astrophysics Data System (ADS)

Dukkipati, Rao V.

The development of experimental facilities for rail vehicle testing is being complemented by analytic studies. The purpose of this effort has been to gain insight into the dynamics of rail vehicles in order to guide development of the Roller Rigs and to establish an analytic framework for the design and interpretation of tests to be conducted on Roller Rigs. The work described here represents initial efforts towards meeting these objectives. Generic linear models were developed of a freight car (with a characteristic North American three-piece truck) on tangent track. The models were developed using the generalized multi body dynamics software MEDYNA. Predictions were made of the theoretical linear model hunting (lateral stability) characteristics of the freight car, i. e., the critical speeds and frequencies, for five different configurations: (a) freight car on track, (b) the freight car's front truck on the roller stand and its rear truck on track, (c) freight car on the roller rig, (d) a single truck on track, and (e) single truck on the roller stand. These were compared with the Association of American Railroads' field test data for an 80-ton hopper car equipped with A-3 ride control trucks. Agreement was reached among all the analytical models, with all models indicating a range of hunting speeds of 2% from the highest to lowest. The largest discrepancy, approximately 6%, was indicated between the models and the field test data. Parametric study results using linear model of freight truck on the roller rig show that (a) increasing roller radius increases critical speed (b) increasing the wheel initial cone angle will decrease the hunting speed (c) increasing the roller cant increases hunting speed (d) decrowning of the wheelset on the rollers will not effect the hunting speed but induces longitudinal destabilizing horizontal forces at the contact and (e) lozenging of wheelset on the rollers induces a yaw moment and the hunting speed decreases with increasing wheelset yaw angle.

Examining the impact of opioid analgesics on crash responsibility in truck drivers involved in fatal crashes.

PubMed

Reguly, Paula; Dubois, Sacha; Bédard, Michel

2014-01-01

Commercial motor vehicle (CMV) drivers, particularly drivers of large trucks continue to be a population of concern regarding traffic safety despite the reduction in large truck crash rates over the past decade. Medication and drug use while driving is one important risk factor for large truck crashes. Work-related exposures, such as vibration, manual handling and poor ergonomics contribute to an increased risk for injuries and chronic conditions and are common reasons for opioid analgesic (OA) use by CMV truck drivers. The objectives of this study were to examine the role of OA use in CMV truck drivers involved in fatal crashes by: (a) generating prevalence estimates of OA use; (b) documenting the relationship between OA use and crash responsibility. Case-control study using logistic regression to compare Fatality Analysis Reporting System (1993-2008) record of one or more crash-related unsafe driver actions (UDAs--a proxy measure of responsibility) between drivers with a positive drug test and drivers with a negative drug test for OA, controlling for age, other drug use, and driving history. The annual prevalence of OA use among all CMV drivers of large trucks involved in fatal crashes did not exceed 0.46% for any year in the study period and mostly ranged between 0.1 and 0.2%. Male truck drivers using OA had greater odds of committing an UDA (OR: 2.80; 95% CI: 1.64; 4.81). Middle-aged users had greater odds than younger or older users. The results of our study indicate that the presence of OAs is associated with greater odds of committing an UDA. This association may have implications for the commercial transport industry and traffic safety. However, the limited prevalence of OA use is encouraging and further research is needed to address the limitations of the study. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Estimating the contributions of mobile sources of PAH to urban air using real-time PAH monitoring.

PubMed

Dunbar, J C; Lin, C I; Vergucht, I; Wong, J; Duran, J L

2001-11-12

Motor vehicles are a significant source of airborne polycyclic aromatic hydrocarbons (PAH) in many urban areas. Traditional approaches used in determining the relative contributions of individual vehicle types to the total amount of PAH in air have been based on the analysis of integrated samples of airborne particles and gases for the presence of chemical tracers indicative of the vehicles from which the chemicals derived. As an alternative, we have used a photoelectric aerosol sensor (PAS) capable of measuring PAH levels in real-time in the emissions plumes from motor vehicles. We placed the PAS near a traffic-light in Kenmore Square, a busy crossroads in downtown Boston (MA, USA). A video camera co-located at the site recorded the vehicles passing the sensor, and this record was correlated with the PAS data. During a 5-day monitoring period (approximately 59 h) in the summer of 1998, over 34,000 motor vehicles were counted and classified and over 24,000 PAS readings were recorded (frequency = 1/8.6 s). The composition of the vehicle population was 94% passenger vehicles, 1.4% buses, 2.6% small trucks, 1.3% medium trucks, 0.35% large trucks, and 0.45% garbage and construction trucks. In analyzing the PAS data, it was assumed that the highest PAS measurements--those that exceeded the 95% critical level of the 5-min moving average of all the PAS measurements--were indicative of primary vehicular emissions. We found that approximately 46% of the mass of particle-bound PAH (i.e. approximately 46% of the integrated area under the PAS signal vs. time plots) was attributable to primary emissions from motor vehicles passing the sensor. Of this, 35-61% was attributable to passenger vehicles (cars, pickup trucks, and sports utility vehicles) and 39-65% was attributable to non-passenger vehicles [buses (14-23%), small trucks (12-20%), medium trucks (8.4-14%), large trucks (2.9-4.8%) and garbage and construction trucks (1.9-3.2%)]. Our results suggest that on a per vehicle basis, buses and trucks--the majority of which run on diesel fuel--emitted greater amounts of particle-bound PAH than passenger vehicles. Overall, we found that real-time photoelectric aerosol sensing (in combination with video photography) is useful for estimating the contributions of airborne PAB from different vehicle types. Due to the physical constraints of our monitoring site and the high volumes of traffic, however, it was not possible to uniquely attribute PAS signals to individual vehicles.

Essential Power Systems Workshop - OEM Perspective

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bill Gouse

2001-12-12

In California, idling is largely done for climate control. This suggests that climate control devices alone could be used to reduce idling. Line-haul truck drivers surveyed require an average of 4-6 kW of power for a stereo, CB radio, light, refrigerator, and climate control found in the average truck. More power may likely be necessary for peak power demands. The amount of time line-haul trucks reported to have stopped is between 25 and 30 hours per week. It was not possible to accurately determine from the pilot survey the location, purpose, and duration of idling. Consulting driver logs or electronicallymore » monitoring trucks could yield more accurate data, including seasonal and geographic differences. Truck drivers were receptive to idling alternatives. Two-thirds of truck drivers surveyed support a program to reduce idling. Two-thirds of drivers reported they would purchase idling reduction technologies if the technology yielded a payback period of two years or less. Willingness to purchase auxiliary power units appears to be higher for owner-operators than for company drivers. With a 2-year payback period, 82% of owner- operators would be willing to buy an idle- reducing device, while 63% of company drivers thought their company would do the same. Contact with companies is necessary to discern whether this difference between owner- operators and companies is true or simply due to the perception of the company drivers. Truck stops appear to be a much more attractive option for electrification than rest areas by a 48% to 21% margin. Much of this discrepancy may be due to perceived safety problems with rest areas. This survey did not properly differentiate between using these areas for breaks or overnight. The next, full survey will quantify where the truck drivers are staying overnight, where they go for breaks, and the duration of time they spend at each place. The nationwide survey, which is in progress, will indicate how applicable the results are to the US in general. In addition to the survey, we believe data loggers and focus groups will be necessary to collect the idling duration and location data necessary to compare auxiliary power units to truck stop electrification. Focus groups are recommended to better understand the driver response to APUs and electrification. The appearance and perception of the new systems will need further clarification, which could be accomplished with a demonstration for truck drivers.« less