The Dynamics and Correlates of Religious Service Attendance in Adolescence

ERIC Educational Resources Information Center

Hardie, Jessica Halliday; Pearce, Lisa D.; Denton, Melinda Lundquist

2016-01-01

This study examines changes in religious service attendance over time for a contemporary cohort of adolescents moving from middle to late adolescence. We use two waves of a nationally representative panel survey of youth from the National Study of Youth and Religion (NSYR) to examine the dynamics of religious involvement during adolescence. We…

Simulation of Detecting Damage in Composite Stiffened Panel Using Lamb Waves

NASA Technical Reports Server (NTRS)

Wang, John T.; Ross, Richard W.; Huang, Guo L.; Yuan, Fuh G.

2013-01-01

Lamb wave damage detection in a composite stiffened panel is simulated by performing explicit transient dynamic finite element analyses and using signal imaging techniques. This virtual test process does not need to use real structures, actuators/sensors, or laboratory equipment. Quasi-isotropic laminates are used for the stiffened panels. Two types of damage are studied. One type is a damage in the skin bay and the other type is a debond between the stiffener flange and the skin. Innovative approaches for identifying the damage location and imaging the damage were developed. The damage location is identified by finding the intersection of the damage locus and the path of the time reversal wave packet re-emitted from the sensor nodes. The damage locus is a circle that envelops the potential damage locations. Its center is at the actuator location and its radius is computed by multiplying the group velocity by the time of flight to damage. To create a damage image for estimating the size of damage, a group of nodes in the neighborhood of the damage location is identified for applying an image condition. The image condition, computed at a finite element node, is the zero-lag cross-correlation (ZLCC) of the time-reversed incident wave signal and the time reversal wave signal from the sensor nodes. This damage imaging process is computationally efficient since only the ZLCC values of a small amount of nodes in the neighborhood of the identified damage location are computed instead of those of the full model.

Space-Based Gravitational-wave Mission Concept Studies

NASA Technical Reports Server (NTRS)

Livas, Jeffrey C.

2012-01-01

The LISA Mission Concept has been under study for over two decades as a spacebased gravitational-wave detector capable of observing astrophysical sources in the 0.0001 to 1 Hz band. The concept has consistently received strong recommendations from various review panels based on the expected science, most recently from the US Astr02010 Decadal Review. Budget constraints have led both the US and European Space agencies to search for lower cost options. We report results from the US effort to explore the tradeoffs between mission cost and science return, and in particular a family of mission concepts referred to as SGO (Space-based Gravitational-wave Observatory).

Wecpos - Wave Energy Coastal Protection Oscillating System: A Numerical Assessment

NASA Astrophysics Data System (ADS)

Dentale, Fabio; Pugliese Carratelli, Eugenio; Rzzo, Gianfranco; Arsie, Ivan; Davide Russo, Salvatore

2010-05-01

In recent years, the interest in developing new technologies to produce energy with low environmental impact by using renewable sources has grown exponentially all over the world. In this context, the experiences made to derive electricity from the sea (currents, waves, etc.) are of particular interest. At the moment, due to the many existing experiments completed or still in progress, it is quite impossible explain what has been obtained but it is worth mentioning the EMEC, which summarizes the major projects in the world. Another important environmental aspect, also related to the maritime field, is the coastal protection from the sea waves. Even in this field, since many years, the structural and non-structural solutions which can counteract this phenomenon are analyzed, in order to cause the least possible damage to the environment. The studies in development by the researchers of the University of Salerno are based on these two aspect previously presented. Considering the technologies currently available, a submerged system has been designed, WECPOS (Wave Energy Coastal Protection Oscillating System), to be located on relatively shallow depths, to can be used simultaneously for both electricity generation and for the coastal protection using the oscillating motion of the water particles. The single element constituting the system is realized by a fixed base and three movable panels that can fluctuate in a fixed angle. The waves interact with the panels generating an alternative motion which can be exploited to produce electricity. At the same time, the constraint movement imposed for the rotation of the panels is a barrier to the wave propagation phenomena, triggering the breaking in the downstream part of the device. So the wave energy will be dissipated obtaining a positive effect for the coastal protection. Currently, the efficiency and effectiveness of the system (WECPOS single module) has been studied by using numerical models. Using the FLOW-3D® software it has been possible to evaluate the hydrodynamic interactions that occur between a regular wave, with different height and period characteristics. The RANS equations, coupled with the RNG turbulence model, have been integrated on a three-dimensional channel (90.0 x 6.0 x 8.0 m), using a numerical domain made of two mesh blocks: a general one containing the entire domain (cells size 0.30 cm) and the localized one on the device (cells size 0.10 cm). With the results, by assessing the rotational angle, angular velocity, hydraulic torque of the individual panel it has been possible to estimate the potential energy production. A Matlab/Simulink model has been built to estimate the production of electric energy by means of an oleodynamic system consisting of a piston and a turbine coupled with an electric generator. About the coastal protection, by estimating some characteristic parameters of the wave motion (zero-moment wave height Hmo, transmission coefficient Kt and the average free surface elevation), the behaviour of the WECPOS device has been analyzed for its ability in wave energy dissipation.

Food Hardships and Child Behavior Problems among Low-Income Children. Discussion Paper No. 1290-04

ERIC Educational Resources Information Center

Slack, Kristen Shook; Yoo, Joan

2004-01-01

Using data from two waves of a panel study of families who currently or recently received cash welfare benefits, we test hypotheses about the relationship between food hardships and behavior problems among two different age groups (458 children ages 3-5-and 747 children ages 6-12). Results show that food hardships are positively associated with…

Millimeter Wave Detection of Localized Anomalies in the Space Shuttle External Fuel Tank Insulating Foam and Acreage Heat Tiles

NASA Technical Reports Server (NTRS)

Kharkovsky, S.; Case, J. T.; Zoughi, R.; Hepburn, F.

2005-01-01

The Space Shuttle Columbia's catastrophic accident emphasizes the growing need for developing and applying effective, robust and life-cycle oriented nondestructive testing (NDT) methods for inspecting the shuttle external fuel tank spray on foam insulation (SOFI) and its protective acreage heat tiles. Millimeter wave NDT techniques were one of the methods chosen for evaluating their potential for inspecting these structures. Several panels with embedded anomalies (mainly voids) were produced and tested for this purpose. Near-field and far-field millimeter wave NDT methods were used for producing millimeter wave images of the anomalies in SOFI panel and heat tiles. This paper presents the results of an investigation for the purpose of detecting localized anomalies in two SOFI panels and a set of heat tiles. To this end, reflectometers at a relatively wide range of frequencies (Ka-band (26.5 - 40 GHz) to W-band (75 - 110 GHz)) and utilizing different types of radiators were employed. The results clearly illustrate the utility of these methods for this purpose.

Space-Based Gravitational-Wave Observatory (SGO) Mission Concept Study

NASA Technical Reports Server (NTRS)

Livas, Jeffrey; McNamara, Paul; Jennrich, Oliver

2012-01-01

The LISA Mission Concept has been under study for over two decades as a space-based gravitational-wave detector capable of observing astrophysical sources in the 0.0001 to 1 Hz band. The concept has consistently received strong recommendations from various review panels based on the expected science, most recently from the US Astr02010 Decadal Review. Budget constraints have led both the US and European Space agencies to search for lower cost options. We report results from the US effort to explore the tradeoffs between mission cost and science return.

Modal analysis and acoustic transmission through offset-core honeycomb sandwich panels

NASA Astrophysics Data System (ADS)

Mathias, Adam Dustin

The work presented in this thesis is motivated by an earlier research that showed that double, offset-core honeycomb sandwich panels increased thermal resistance and, hence, decreased heat transfer through the panels. This result lead to the hypothesis that these panels could be used for acoustic insulation. Using commercial finite element modeling software, COMSOL Multiphysics, the acoustical properties, specifically the transmission loss across a variety of offset-core honeycomb sandwich panels, is studied for the case of a plane acoustic wave impacting the panel at normal incidence. The transmission loss results are compared with those of single-core honeycomb panels with the same cell sizes. The fundamental frequencies of the panels are also computed in an attempt to better understand the vibrational modes of these particular sandwich-structured panels. To ensure that the finite element analysis software is adequate for the task at hand, two relevant benchmark problems are solved and compared with theory. Results from these benchmark results compared well to those obtained from theory. Transmission loss results from the offset-core honeycomb sandwich panels show increased transmission loss, especially for large cell honeycombs when compared to single-core honeycomb panels.

Material Inspection Using THz and Thermal Wave

NASA Astrophysics Data System (ADS)

Zhang, Cunlin; Mu, Kaijun; Li, Yanhong; Zhang, X.-C.

2007-03-01

Terahertz (THz) and thermal wave imaging technologies are complementary inspection modalities for use in non-contact and non-destructive evaluation. Both of them are applied in order to evaluate damages on a variety of composite samples. We will also report the test of a large number of insulation foam panels used in NASA's External Fuel Tank through pulse and CW terahertz systems. The study of defects using the two techniques in selected materials, including metal plates, carbon fibers, glass fibers, carbon silicon composites, etc is also shown.

Response problems in a vacation panel study

Treesearch

Christine A. Vogt; Susan I. Stewart

2001-01-01

This paper investigates response problems encountered in a panel study of travel behavior. Though the overall response rate to the three-wave panel study was acceptable (over 60%), three types of response problems were encountered: refusal, non-response, and attrition. In a follow-up phone survey, a sample of individuals from each problem response group was questioned...

Matrix formalism of electromagnetic wave propagation through multiple layers in the near-field region: application to the flat panel display.

PubMed

Lee, C Y; Lee, D E; Hong, Y K; Shim, J H; Jeong, C K; Joo, J; Zang, D S; Shim, M G; Lee, J J; Cha, J K; Yang, H G

2003-04-01

We have developed an electromagnetic (EM) wave propagation theory through a single layer and multiple layers in the near-field and far-field regions, and have constructed a matrix formalism in terms of the boundary conditions of the EM waves. From the shielding efficiency (SE) against EM radiation in the near-field region calculated by using the matrix formalism, we propose that the effect of multiple layers yields enhanced shielding capability compared to a single layer with the same total thickness in conducting layers as the multiple layers. We compare the intensities of an EM wave propagating through glass coated with conducting indium tin oxide (ITO) on one side and on both sides, applying it to the electromagnetic interference (EMI) shielding filter in a flat panel display such as a plasma display panel (PDP). From the measured intensities of EMI noise generated by a PDP loaded with ITO coated glass samples, the two-side coated glass shows a lower intensity of EMI noise compared to the one-side coated glass. The result confirms the enhancement of the SE due to the effect of multiple layers, as expected in the matrix formalism of EM wave propagation in the near-field region. In the far-field region, the two-side coated glass with ITO in multiple layers has a higher SE than the one-side coated glass with ITO, when the total thickness of ITO in both cases is the same.

Effect of bow-type initial imperfection on reliability of minimum-weight, stiffened structural panels

NASA Technical Reports Server (NTRS)

Stroud, W. Jefferson; Krishnamurthy, Thiagaraja; Sykes, Nancy P.; Elishakoff, Isaac

1993-01-01

Computations were performed to determine the effect of an overall bow-type imperfection on the reliability of structural panels under combined compression and shear loadings. A panel's reliability is the probability that it will perform the intended function - in this case, carry a given load without buckling or exceeding in-plane strain allowables. For a panel loaded in compression, a small initial bow can cause large bending stresses that reduce both the buckling load and the load at which strain allowables are exceeded; hence, the bow reduces the reliability of the panel. In this report, analytical studies on two stiffened panels quantified that effect. The bow is in the shape of a half-sine wave along the length of the panel. The size e of the bow at panel midlength is taken to be the single random variable. Several probability density distributions for e are examined to determine the sensitivity of the reliability to details of the bow statistics. In addition, the effects of quality control are explored with truncated distributions.

Stress-wave velocity of wood-based panels: effect of moisture, product type, and material direction

Treesearch

Guangping Han; Qinglin Wu; Xiping Wang

2006-01-01

The effect of moisture on longitudinal stress-wave velocity (SWV), bending stiffness. and bending strength of commercial oriented strandboard, plywood. particleboard. and southern pine lumber was evaluated. It was shown that the stress-wave verocity decreased in general with increases in panel moisture content (MC). At a given MC level. SWV varied with panel type and...

Dropping vs. Restarting: A Dynamic Analysis of Two Newspaper Subscribing Behaviors.

ERIC Educational Resources Information Center

Zhu, Jian-Hua

In an effort to help describe and explain why people do not read and subscribe to newspapers, a study built on previous research by adding two new contributions: (1) reliance on a four-wave panel data-set rather than on a one-shot survey; and (2) use of a dynamic modeling procedure rather than cross-sectional analysis. The problem with previous…

Parental Employment and Child Behaviors: Do Parenting Practices Underlie These Relationships?

ERIC Educational Resources Information Center

Hadzic, Renata; Magee, Christopher A.; Robinson, Laura

2013-01-01

This study examined whether hours of parental employment were associated with child behaviors via parenting practices. The sample included 2,271 Australian children aged 4-5 years at baseline. Two-wave panel mediation models tested whether parenting practices that were warm, hostile, or characterized by inductive reasoning linked parent's hours of…

Media ideals and early adolescents' body image: Selective avoidance or selective exposure?

PubMed

Rousseau, Ann; Eggermont, Steven

2018-06-05

The present study combines selective exposure theory with body image coping literature to study effects of media internalization in early adolescence. The main objective was to explore how early adolescents selectively internalize media body ideals to manage their body image. To examine the role of media internalization in early adolescents' body image management, we used two-wave panel data (N Wave1  = 1986) gathered among 9- to 14-year-olds. Structural equation analyses indicated that media internalization (Wave 1) positively related to body surveillance (Wave 2). Body surveillance (Wave 2), in turn, was associated with more body image self-discrepancy (Wave 2). In addition, body image self-discrepancy (Wave 1) related to higher body surveillance (Wave 1). Body surveillance, in turn, related to more media internalization cross-sectionally, but less media internalization six months later. Taken together, these results suggest a role for media internalization in early adolescents' body image management. Theoretical and practical implications are discussed. Copyright © 2018 Elsevier Ltd. All rights reserved.

Popularity through Online Harm: The Longitudinal Associations between Cyberbullying and Sociometric Status in Early Adolescence

ERIC Educational Resources Information Center

Wegge, Denis; Vandebosch, Heidi; Eggermont, Steven; Pabian, Sara

2016-01-01

The present study examines the reciprocal associations between cyberbullying behavior and young adolescents' social status. For this purpose, a two-wave panel study with an 8-month time interval was conducted among an entire grade of 154 secondary school pupils (age 12-14). The survey featured items on traditional bullying and cyberbullying as…

The Impact of Adolescents' News and Action Movie Viewing on Risky Driving Behavior: A Longitudinal Study

ERIC Educational Resources Information Center

Beullens, Kathleen; Roe, Keith; Van den Bulck, Jan

2011-01-01

Traffic crashes remain an important cause of injury and death among young people. The aim of the current study was to examine whether adolescents' viewing of particular television genres predicted later risky driving. Data were collected with a two-wave panel survey (N = 426); structural equation modeling was used to examine the relationships…

Sound transmission loss of composite sandwich panels

NASA Astrophysics Data System (ADS)

Zhou, Ran

Light composite sandwich panels are increasingly used in automobiles, ships and aircraft, because of the advantages they offer of high strength-to-weight ratios. However, the acoustical properties of these light and stiff structures can be less desirable than those of equivalent metal panels. These undesirable properties can lead to high interior noise levels. A number of researchers have studied the acoustical properties of honeycomb and foam sandwich panels. Not much work, however, has been carried out on foam-filled honeycomb sandwich panels. In this dissertation, governing equations for the forced vibration of asymmetric sandwich panels are developed. An analytical expression for modal densities of symmetric sandwich panels is derived from a sixth-order governing equation. A boundary element analysis model for the sound transmission loss of symmetric sandwich panels is proposed. Measurements of the modal density, total loss factor, radiation loss factor, and sound transmission loss of foam-filled honeycomb sandwich panels with different configurations and thicknesses are presented. Comparisons between the predicted sound transmission loss values obtained from wave impedance analysis, statistical energy analysis, boundary element analysis, and experimental values are presented. The wave impedance analysis model provides accurate predictions of sound transmission loss for the thin foam-filled honeycomb sandwich panels at frequencies above their first resonance frequencies. The predictions from the statistical energy analysis model are in better agreement with the experimental transmission loss values of the sandwich panels when the measured radiation loss factor values near coincidence are used instead of the theoretical values for single-layer panels. The proposed boundary element analysis model provides more accurate predictions of sound transmission loss for the thick foam-filled honeycomb sandwich panels than either the wave impedance analysis model or the statistical energy analysis model.

Individual payments as a longer-term incentive in online panels.

PubMed

Göritz, Anja S; Wolff, Hans-Georg; Goldstein, Daniel G

2008-11-01

Does it pay to pay online panel members? A three-wave longitudinal experiment was conducted with an online panel to examine whether per person payments, paid through an online intermediary, influence response and retention rates. In the payment condition, participants were promised payment for participation at each wave, whereas control participants were not offered any payment. The promise of a payment had a negative effect on response in Wave 1, but a positive effect on response in Wave 2. Payment had no significant effect on retention. Completing a given wave was an indicator for responding to a subsequent invitation.

Field-incidence noise transmission loss of general aviation aircraft double wall configurations

NASA Astrophysics Data System (ADS)

Grosveld, F. W.

1984-01-01

Theoretical formulations have been developed to describe the transmission of reverberant sound through an infinite, semi-infinite and a finite double panel structure. The model incorporates the fundamental resonance frequencies of each of the panels, the mass-air-mass resonances of the structure, the standing wave resonances in the cavity between the panels and finally the coincidence resonance regions, where the exciting sound pressure wave and flexural waves of each of the panels coincide. It is shown that phase cancellation effects of pressure waves reflected from the cavity boundaries back into the cavity allows the transmission loss of a finite double panel structure to be approximated by a finite double panel mounted in an infinite baffle having no cavity boundaries. Comparison of the theory with high quality transmission loss data yields good agreement in the mass-controlled frequency region. It is shown that the application of acoustic blankets to the double panel structure does not eliminate the mass-air-mass resonances if those occur at low frequencies. It is concluded that this frequency region of low noise transmission loss is a potential interior noise problem area for propeller driven aircraft having a double panel fuselage construction.

Encouraging the Disuse of Illicit Drugs Among At-Risk Youth.

PubMed

Cheung, Chau-kiu; Ngai, Steven Sek-yum

2016-05-01

Youth at risk of illicit drug abuse and other delinquent acts are the target of social work services. Preventing or discouraging the use of illicit drugs among at-risk youth is a long-standing practical and research concern. For this reason, the preventive function of courage is a research gap the present study seeks to fill. The study collected data from 169 at-risk youths and their social workers with two-wave panel surveys. Results show that courage in Wave 1 presented a strong negative effect on illicit drug use in Wave 2 in the youth, controlling for illicit drug use in Wave 1 and background characteristics. Moreover, the negative effect was stronger when Wave 1 drug use was more likely. These results imply the helpfulness of encouraging at-risk youth to gather courage to resist the temptation to use illicit drugs. © The Author(s) 2014.

Acoustic plane waves incident on an oblique clamped panel in a rectangular duct

NASA Technical Reports Server (NTRS)

Unz, H.; Roskam, J.

1980-01-01

The theory of acoustic plane waves incident on an oblique clamped panel in a rectangular duct was developed from basic theoretical concepts. The coupling theory between the elastic vibrations of the panel (plate) and the oblique incident acoustic plane wave in infinite space was considered in detail, and was used for the oblique clamped panel in the rectangular duct. The partial differential equation which governs the vibrations of the clamped panel (plate) was modified by adding to it stiffness (spring) forces and damping forces. The Transmission Loss coefficient and the Noise Reduction coefficient for oblique incidence were defined and derived in detail. The resonance frequencies excited by the free vibrations of the oblique finite clamped panel (plate) were derived and calculated in detail for the present case.

Stable Postdivorce Family Structures during Late Adolescence and Socioeconomic Consequences in Adulthood

ERIC Educational Resources Information Center

Sun, Yongmin; Li, Yuanzhang

2008-01-01

Using four waves of panel data from 6,954 American young adults in the National Education Longitudinal Study, we compare the long-term socioeconomic consequences of growing up in two types of divorced families. Our findings show that the negative socioeconomic consequences of growing up in unstable postdivorce families are at least twice as large…

Family Environment and Adolescents' Well-Being Before and After Parents' Marital Disruption: A Longitudinal Analysis.

ERIC Educational Resources Information Center

Sun, Yongmin

2001-01-01

Based on two waves of a large, nationally representative panel, this study demonstrates that even before the disruption, both male and female adolescents from families that subsequently dissolve exhibit more academic, psychological, and behavioral problems than peers whose parents remain married. Analyses also indicate females are as likely to be…

Wave velocity characteristic for Kenaf natural fibre under impact damage

NASA Astrophysics Data System (ADS)

Zaleha, M.; Mahzan, S.; Fitri, Muhamad; Kamarudin, K. A.; Eliza, Y.; Tobi, A. L. Mohd

2017-01-01

This paper aims to determining the wave velocity characteristics for kenaf fibre reinforced composite (KFC) and it includes both experimental and simulation results. Lead zirconate titanate (PZT) sensor were proposed to be positioned to corresponding locations on the panel. In order to demonstrate the wave velocity, an impacts was introduced onto the panel. It is based on a classical sensor triangulation methodology, combines with experimental strain wave velocity analysis. Then the simulation was designed to replicate panel used in the experimental impacts test. This simulation was carried out using ABAQUS. It was shown that the wave velocity propagates faster in the finite element simulation. Although the experimental strain wave velocity and finite element simulation results do not match exactly, the shape of both waves is similar.

Ex-CARS: exotic configuration for coherent anti-Stokes Raman scattering microspectroscopy utilizing two laser sources

PubMed Central

Yakovlev, Vladislav V.; Petrov, Georgi I.; Noojin, Gary D.; Harbert, Corey; Denton, Michael; Thomas, Robert

2011-01-01

We propose and experimentally demonstrate a new coherent anti-Stokes Raman scattering setting, which relies on a coherent excitation of Raman vibration using a broadband ultrashort laser pulse and signal read-out using a conventional continuous wave laser radiation. Such an exotic arrangement does not require any synchronization of two laser sources and can be used for direct comparison of amplitudes of nonlinear and spontaneous Raman signals. Ex-CARS in time- (top panel) and frequency- (bottom panel) domain. PMID:20635427

Cumulative Disadvantage and Connections between Welfare Problems

ERIC Educational Resources Information Center

Bask, Miia

2011-01-01

In this paper, we perform a latent class factor analysis of a panel that involves two waves of data from an annual survey of living conditions in Sweden that were gathered in the years 1994-1995 and 2002-2003. We follow the same 3,149 individuals over both waves, describing them by sex, age group, family type, nationality background, education…

Detection of CFRP Composite Manufacturing Defects Using a Guided Wave Approach

NASA Technical Reports Server (NTRS)

Hudson, Tyler B.; Hou, Tan-Hung; Grimsley, Brian W.; Yuan, Fuh-Gwo

2015-01-01

NASA Langley Research Center is investigating a guided-wave based defect detection technique for as-fabricated carbon fiber reinforced polymer (CFRP) composites. This technique will be extended to perform in-process cure monitoring, defect detection and size determination, and ultimately a closed-loop process control to maximize composite part quality and consistency. The overall objective of this work is to determine the capability and limitations of the proposed defect detection technique, as well as the number and types of sensors needed to identify the size, type, and location of the predominant types of manufacturing defects associated with laminate layup and cure. This includes, porosity, gaps, overlaps, through-the-thickness fiber waviness, and in-plane fiber waviness. The present study focuses on detection of the porosity formed from variations in the matrix curing process, and on local overlaps intentionally introduced during layup of the prepreg. By terminating the cycle prematurely, three 24-ply unidirectional composite panels were manufactured such that each subsequent panel had a higher final degree of cure, and lower level of porosity. It was demonstrated that the group velocity, normal to the fiber direction, of a guided wave mode increased by 5.52 percent from the first panel to the second panel and 1.26 percent from the second panel to the third panel. Therefore, group velocity was utilized as a metric for degree of cure and porosity measurements. A fully non-contact guided wave hybrid system composed of an air-coupled transducer and a laser Doppler vibrometer (LDV) was used for the detection and size determination of an overlap By transforming the plate response from the time-space domain to the frequency-wavenumber domain, the total wavefield was then separated into the incident and backscatter waves. The overlap region was accurately imaged by using a zero-lag cross-correlation (ZLCC) imaging condition, implying the incident and backscattered waves are in phase over the overlap boundaries.

A Note on Improving Process Efficiency in Panel Surveys with Paradata

ERIC Educational Resources Information Center

Kreuter, Frauke; Müller, Gerrit

2015-01-01

Call scheduling is a challenge for surveys around the world. Unlike cross-sectional surveys, panel surveys can use information from prior waves to enhance call-scheduling algorithms. Past observational studies showed the benefit of calling panel cases at times that had been successful in the past. This article is the first to experimentally assign…

Patterns of productive activity engagement as a longitudinal predictor of depressive symptoms among older adults in urban China.

PubMed

Liu, Huiying; Lou, Vivian W Q

2017-11-01

Using two waves of panel data from the China Health and Retirement Longitudinal Study, this study prospectively assessed whether four distinct patterns of productive activity engagement would predict depressive symptoms among older adults in urban China two years later. A sample of urban residents aged 60 or above at Wave 1 and who were interviewed in both waves (N = 2398) was used. Latent class analysis (LCA) was conducted to identify distinct patterns of productive activity engagement that occurred within the Wave 1 data. Next, the generalized estimating equations were used to assess whether identified patterns predicted the levels of depressive symptoms measured at Wave 2. Our use of LCA confirmed the existence of four distinct patterns of productive activity engagement among the study sample: Informal Helper/Carer, Working-Caring Engager, Civic Contributor, and Low/Spousal Carer. All of these three patterns exhibited significantly lower levels of depressive symptoms than that of Low/Spousal Carer two years later. Our use of individual-based categorization of productive engagement better captured the reality of older adults performing various productive activities than summative scales of productive activities did and, therefore, provided a more valid clarification of differential well-being outcomes among older adults.

A Method for Modeling the Intrinsic Dynamics of Intraindividual Variability: Recovering the Parameters of Simulated Oscillators in Multi-Wave Panel Data.

ERIC Educational Resources Information Center

Boker, Steven M.; Nesselroade, John R.

2002-01-01

Examined two methods for fitting models of intrinsic dynamics to intraindividual variability data by testing these techniques' behavior in equations through simulation studies. Among the main results is the demonstration that a local linear approximation of derivatives can accurately recover the parameters of a simulated linear oscillator, with…

Early Adolescent Boys' Exposure to Internet Pornography: Relationships to Pubertal Timing, Sensation Seeking, and Academic Performance

ERIC Educational Resources Information Center

Beyens, Ine; Vandenbosch, Laura; Eggermont, Steven

2015-01-01

Research has demonstrated that adolescents regularly use Internet pornography. This two-wave panel study aimed to test an integrative model in early adolescent boys (M[subscript age] = 14.10; N = 325) that (a) explains their exposure to Internet pornography by looking at relationships with pubertal timing and sensation seeking, and (b) explores…

A two wave cross-lagged study of work-role conflict, work-family conflict and emotional exhaustion.

PubMed

Jensen, Maria Therese

2016-12-01

By using a two-wave panel design, the present study aimed to study causal, reversed, and reciprocal relations among work-role conflict, work-family conflict, and emotional exhaustion. The Conservation of Resources theory was applied as a theoretical framework. The study was conducted in a large Norwegian oil and gas company (n = 1703). The results demonstrated positive cross-lagged effects of work-role conflict and work-family conflict on emotional exhaustion. In addition, emotional exhaustion predicted work-family conflict over time, and work-family conflict predicted work-role conflict over time, indicating the presence of reciprocal effects. The current study adds new knowledge to the positioning of work-family conflict in relation to perceived conflict in the workplace and emotional exhaustion. © 2016 Scandinavian Psychological Associations and John Wiley & Sons Ltd.

Nonlinear vibration and radiation from a panel with transition to chaos induced by acoustic waves

NASA Technical Reports Server (NTRS)

Maestrello, Lucio; Frendi, Abdelkader; Brown, Donald E.

1992-01-01

The dynamic response of an aircraft panel forced at resonance and off-resonance by plane acoustic waves at normal incidence is investigated experimentally and numerically. Linear, nonlinear (period doubling) and chaotic responses are obtained by increasing the sound pressure level of the excitation. The response time history is sensitive to the input level and to the frequency of excitation. The change in response behavior is due to a change in input conditions, triggered either naturally or by modulation of the bandwidth of the incident waves. Off-resonance, bifurcation is diffused and difficult to maintain, thus the panel response drifts into a linear behavior. The acoustic pressure emanated by the panel is either linear or nonlinear as is the vibration response. The nonlinear effects accumulate during the propagation with distance. Results are also obtained on the control of the panel response using damping tape on aluminum panel and using a graphite epoxy panel having the same size and weight. Good agreement is obtained between the experimental and numerical results.

Sound Transmission Through a Curved Honeycomb Composite Panel

NASA Technical Reports Server (NTRS)

Klos, Jacob; Robinson, Jay H.; Buehrle, Ralph D.

2003-01-01

Composite structures are often used in aircraft because of the advantages offered by a high strength to weight ratio. However, the acoustical properties of these light and stiff structures can often be less than desirable resulting in high aircraft interior noise levels. In this paper, measurements and predictions of the transmission loss of a curved honeycomb composite panel are presented. The transmission loss predictions are validated by comparisons to measurements. An assessment of the behavior of the panel is made from the dispersion characteristics of transverse waves propagating in the panel. The speed of transverse waves propagating in the panel is found to be sonic or supersonic over the frequency range from 100 to 5000 Hz. The acoustical benefit of reducing the wave speed for transverse vibration is demonstrated.

Sound Transmission Through Multi-Panel Structures Lined with Elastic Porous Materials

NASA Astrophysics Data System (ADS)

Bolton, J. S.; Shiau, N.-M.; Kang, Y. J.

1996-04-01

Theory and measurements related to sound transmission through double panels lined with elastic porous media are presented. The information has application to the design of noise control barriers and to the optimization of aircraft fuselage transmission loss, for example. The major difference between the work described here and earlier research in this field relates to the treatment of the porous material that is used to line the cavity between the two panels of the double panel structure. Here we have used the porous material theory proposed by Biot since it takes explicit account of all the wave types known to propagate in elastic porous materials. As a result, it is possible to use the theory presented here to calculate the transmission loss of lined double panels at arbitrary angles of incidence; results calculated over a range of incidence angles may then be combined to yield the random incidence transmission loss. In this paper, the equations governing wave propagation in an elastic porous material are first considered briefly and then the general forms for the stresses and displacements within the porous material are given. Those solutions are expressed in terms of a number of constants that can be determined by application of appropriate boundary conditions. The boundary conditions required to model double panels having linings that are either directly attached to the facing panels or separated?!from them by air gaps are presented and discussed. Measurements of the random incidence transmission loss of aluminium double-panel structures lined with polyurethane foam are presented and have been found to be in good agreement with theoretical predictions. Both the theoretical predictions and the measured results have shown that the method by which an elastic porous lining material is attached to the facing panels can have a profound influence on the transmission loss of the panel system. It has been found, for example, that treatments in which the lining material is not directly attached to the facing panels are generally to be preferred to those in which the lining is directly bonded to the panels. These effects may be explained by considering the degree to which the various wave types within the elastic porous material are excited, which in turn can be related to the method by which the lining is mounted to the facing panels.

Damping Enhancement of Composite Panels by Inclusion of Shunted Piezoelectric Patches: A Wave-Based Modelling Approach.

PubMed

Chronopoulos, Dimitrios; Collet, Manuel; Ichchou, Mohamed

2015-02-17

The waves propagating within complex smart structures are hereby computed by employing a wave and finite element method. The structures can be of arbitrary layering and of complex geometric characteristics as long as they exhibit two-dimensional periodicity. The piezoelectric coupling phenomena are considered within the finite element formulation. The mass, stiffness and piezoelectric stiffness matrices of the modelled segment can be extracted using a conventional finite element code. The post-processing of these matrices involves the formulation of an eigenproblem whose solutions provide the phase velocities for each wave propagating within the structure and for any chosen direction of propagation. The model is then modified in order to account for a shunted piezoelectric patch connected to the composite structure. The impact of the energy dissipation induced by the shunted circuit on the total damping loss factor of the composite panel is then computed. The influence of the additional mass and stiffness provided by the attached piezoelectric devices on the wave propagation characteristics of the structure is also investigated.

Damping Enhancement of Composite Panels by Inclusion of Shunted Piezoelectric Patches: A Wave-Based Modelling Approach

PubMed Central

Chronopoulos, Dimitrios; Collet, Manuel; Ichchou, Mohamed; Shah, Tahir

2015-01-01

The waves propagating within complex smart structures are hereby computed by employing a wave and finite element method. The structures can be of arbitrary layering and of complex geometric characteristics as long as they exhibit two-dimensional periodicity. The piezoelectric coupling phenomena are considered within the finite element formulation. The mass, stiffness and piezoelectric stiffness matrices of the modelled segment can be extracted using a conventional finite element code. The post-processing of these matrices involves the formulation of an eigenproblem whose solutions provide the phase velocities for each wave propagating within the structure and for any chosen direction of propagation. The model is then modified in order to account for a shunted piezoelectric patch connected to the composite structure. The impact of the energy dissipation induced by the shunted circuit on the total damping loss factor of the composite panel is then computed. The influence of the additional mass and stiffness provided by the attached piezoelectric devices on the wave propagation characteristics of the structure is also investigated. PMID:28787972

Automated laser-based barely visible impact damage detection in honeycomb sandwich composite structures

NASA Astrophysics Data System (ADS)

Girolamo, D.; Girolamo, L.; Yuan, F. G.

2015-03-01

Nondestructive evaluation (NDE) for detection and quantification of damage in composite materials is fundamental in the assessment of the overall structural integrity of modern aerospace systems. Conventional NDE systems have been extensively used to detect the location and size of damages by propagating ultrasonic waves normal to the surface. However they usually require physical contact with the structure and are time consuming and labor intensive. An automated, contactless laser ultrasonic imaging system for barely visible impact damage (BVID) detection in advanced composite structures has been developed to overcome these limitations. Lamb waves are generated by a Q-switched Nd:YAG laser, raster scanned by a set of galvano-mirrors over the damaged area. The out-of-plane vibrations are measured through a laser Doppler Vibrometer (LDV) that is stationary at a point on the corner of the grid. The ultrasonic wave field of the scanned area is reconstructed in polar coordinates and analyzed for high resolution characterization of impact damage in the composite honeycomb panel. Two methodologies are used for ultrasonic wave-field analysis: scattered wave field analysis (SWA) and standing wave energy analysis (SWEA) in the frequency domain. The SWA is employed for processing the wave field and estimate spatially dependent wavenumber values, related to discontinuities in the structural domain. The SWEA algorithm extracts standing waves trapped within damaged areas and, by studying the spectrum of the standing wave field, returns high fidelity damage imaging. While the SWA can be used to locate the impact damage in the honeycomb panel, the SWEA produces damage images in good agreement with X-ray computed tomographic (X-ray CT) scans. The results obtained prove that the laser-based nondestructive system is an effective alternative to overcome limitations of conventional NDI technologies.

Inspection of the Space Shuttle External Tank SOFI Using Near-Field and Focused Millimeter Wave Nondestructive Testing Techniques

NASA Technical Reports Server (NTRS)

Kharkovsky, S.; Hepburn, F.; Walker, J.; Zoughi, R.

2005-01-01

The Space Shuttle Columbia's catastrophic failure has been attributed to a piece of external tank SOFI (Spray On Foam Insulation) striking the left wing of the orbiter causing significant damage to some of the reinforced carbon/carbon leading edge wing panels. Subsequently, several nondestructive testing (NDT) techniques have been considered for inspecting the external tank. One such method involves using millimeter waves which have been shown to easily penetrate through the foam and provide high resolution images of its interior structures. This paper presents the results of inspecting three different SOFI covered panels by reflectometers at millimeter wave frequencies, specifically at 100 GHz. Each panel was fitted with various embedded anomalies/inserts representing voids and unbonds of diferent shapes, sizes and locations within each panel. In conjunction with these reJqectome&rs, radiators including a focused lens antenna and a small horn antenna were used. The focused lens antenna provided for a footprint diameter of approximately 1.25 cm (0.5") at 25.4 cm (10") away from the lens surface. The horn antenna was primarily operated in its near-field for obtaining relatively high resolution images. These images were produced using 2 0 scanning mechanisms. Discussions of the difference between the capabilities of these two types of antennas (radiators) for the purpose of inspecting the SOFI as it relates to the produced images are also presented.

Well-Being in Adolescence--An Association with Health-Related Behaviors: Findings from "Understanding Society," the UK Household Longitudinal Study

ERIC Educational Resources Information Center

Booker, Cara L.; Skew, Alexandra J.; Sacker, Amanda; Kelly, Yvonne J.

2014-01-01

The objective of this study was to investigate the demographic distribution of selected health-related behaviors and their relationship with different indicators of well-being. The data come from Wave 1 of the youth panel of "Understanding Society" household panel study. The Strengths and Difficulties Questionnaire (SDQ) measured…

Symptoms and subjective quality of life in post-traumatic stress disorder: a longitudinal study.

PubMed

Giacco, Domenico; Matanov, Aleksandra; Priebe, Stefan

2013-01-01

Evidence suggests that post-traumatic stress disorder (PTSD) is associated with substantially reduced subjective quality of life (SQOL). This study aimed to explore whether and how changes in the levels of PTSD symptom clusters of intrusion, avoidance and hyperarousal are associated with changes in SQOL. Two samples with PTSD following the war in former Yugoslavia were studied, i.e. a representative sample of 530 people in five Balkan countries and a non-representative sample of 215 refugees in three Western European countries. They were assessed on average eight years after the war and re-interviewed one year later. PTSD symptoms were assessed on the Impact of Event Scale - Revised and SQOL on the Manchester Short Assessment of Quality of Life. Linear regression and a two-wave cross lagged panel analysis were used to explore the association between PTSD symptom clusters and SQOL. The findings in the two samples were consistent. Symptom reduction over time was associated with improved SQOL. In multivariable analyses adjusted for the influence of all three clusters, gender and time since war exposure, only changes in hyperarousal symptoms were significantly associated with changes in SQOL. The two-wave cross-lagged panel analysis suggested that the link between hyperarousal symptoms and SQOL is bidirectional. Low SQOL of patients with war-related PTSD is particularly associated with hyperarousal symptoms. The findings suggest a bidirectional influence: a reduction in hyperarousal symptoms may result in improved SQOL, and improvements in SQOL may lead to reduced hyperarousal symptoms.

Online communication predicts Belgian adolescents' initiation of romantic and sexual activity.

PubMed

Vandenbosch, Laura; Beyens, Ine; Vangeel, Laurens; Eggermont, Steven

2016-04-01

Online communication is associated with offline romantic and sexual activity among college students. Yet, it is unknown whether online communication is associated with the initiation of romantic and sexual activity among adolescents. This two-wave panel study investigated whether chatting, visiting dating websites, and visiting erotic contact websites predicted adolescents' initiation of romantic and sexual activity. We analyzed two-wave panel data from 1163 Belgian adolescents who participated in the MORES Study. We investigated the longitudinal impact of online communication on the initiation of romantic relationships and sexual intercourse using logistic regression analyses. The odds ratios of initiating a romantic relationship among romantically inexperienced adolescents who frequently used chat rooms, dating websites, or erotic contact websites were two to three times larger than those of non-users. Among sexually inexperienced adolescents who frequently used chat rooms, dating websites, or erotic contact websites, the odds ratios of initiating sexual intercourse were two to five times larger than that among non-users, even after a number of other relevant factors were introduced. This is the first study to demonstrate that online communication predicts the initiation of offline sexual and romantic activity as early as adolescence. Practitioners and parents need to consider the role of online communication in adolescents' developing sexuality. • Adolescents increasingly communicate online with peers. • Online communication predicts romantic and sexual activity among college students. What is New: • Online communication predicts adolescents' offline romantic activity over time. • Online communication predicts adolescents' offline sexual activity over time.

Excellent gamer, excellent driver? The impact of adolescents' video game playing on driving behavior: a two-wave panel study.

PubMed

Beullens, Kathleen; Roe, Keith; Van den Bulck, Jan

2011-01-01

This study explored the impact of adolescents' playing of racing and drive'em up games on their risky driving behavior. Participants were 354 adolescent boys and girls who took part in a longitudinal panel survey on video game playing and risk taking attitudes, intentions and behaviors. In line with cultivation theory and theory of planned behavior the results showed that (even after controlling for aggression and sensation seeking) video game playing during adolescence succeeded in predicting later risky driving behavior through adolescents' attitudes and intentions to exhibit this behavior in the future. The results suggest that this relationship may in part be explained by the game content. Copyright © 2010 Elsevier Ltd. All rights reserved.

Sample Design, Sample Augmentation, and Estimation for Wave 2 of the NSHAP

PubMed Central

English, Ned; Pedlow, Steven; Kwok, Peter K.

2014-01-01

Objectives. The sample for the second wave (2010) of National Social Life, Health, and Aging Project (NSHAP) was designed to increase the scientific value of the Wave 1 (2005) data set by revisiting sample members 5 years after their initial interviews and augmenting this sample where possible. Method. There were 2 important innovations. First, the scope of the study was expanded by collecting data from coresident spouses or romantic partners. Second, to maximize the representativeness of the Wave 2 data, nonrespondents from Wave 1 were again approached for interview in the Wave 2 sample. Results. The overall unconditional response rate for the Wave 2 panel was 74%; the conditional response rate of Wave 1 respondents was 89%; the conditional response rate of partners was 84%; and the conversion rate for Wave 1 nonrespondents was 26%. Discussion. The inclusion of coresident partners enhanced the study by allowing the examination of how intimate, household relationships are related to health trajectories and by augmenting the size of the NSHAP sample size for this and future waves. The uncommon strategy of returning to Wave 1 nonrespondents reduced potential bias by ensuring that to the extent possible the whole of the original sample forms the basis for the field effort. NSHAP Wave 2 achieved its field objectives of consolidating the panel, recruiting their resident spouses or romantic partners, and converting a significant proportion of Wave 1 nonrespondents. PMID:25360016

Acoustic plane waves normally incident on a clamped panel in a rectangular duct. [to explain noise reduction curves for reducing interior noise in aircraft

NASA Technical Reports Server (NTRS)

Unz, H.; Roskam, J.

1979-01-01

The theory of acoustic plane wave normally incident on a clamped panel in a rectangular duct is developed. The coupling theory between the elastic vibrations of the panel (plate) and the acoustic wave propagation in infinite space and in the rectangular duct is considered. The partial differential equation which governs the vibration of the panel (plate) is modified by adding to its stiffness (spring) forces and damping forces, and the fundamental resonance frequency and the attenuation factor are discussed. The noise reduction expression based on the theory is found to agree well with the corresponding experimental data of a sample aluminum panel in the mass controlled region, the damping controlled region, and the stiffness controlled region. All the frequency positions of the upward and downward resonance spikes in the sample experimental data are identified theoretically as resulting from four cross interacting major resonance phenomena: the cavity resonance, the acoustic resonance, the plate resonance, and the wooden back panel resonance.

Information Management: Considering Adolescents' Regulation of Parental Knowledge

ERIC Educational Resources Information Center

Marshall, Sheila K.; Tilton-Weaver, Lauree C.; Bosdet, Lara

2005-01-01

Employing Goffman's [(1959). "The presentation of self in everyday life." New York: Doubleday and Company] notion of impression management, adolescents' conveyance of information about their whereabouts and activities to parents was assessed employing two methodologies. First, a two-wave panel design with a sample of 121 adolescents was used to…

Impact damage visualization in a honeycomb composite panel through laser inspection using zero-lag cross-correlation imaging condition.

PubMed

Girolamo, Donato; Chang, Huan-Yu; Yuan, Fuh-Gwo

2018-07-01

A fully non-contact laser-based nondestructive inspection (NDI) system is developed to detect and visualize damage in structures. The study focuses on the size quantification and characterization of a barely visible impact damage (BVID) in a honeycomb composite panel. The hardware consists of a Q-switched Nd:YAG pulse laser that probes the panel by generating broadband guided waves via thermo-elastic expansion. The laser, in combination with a set of galvano-mirrors is used to raster scan over a two-dimensional surface covering the damaged region of an impacted quasi-isotropic [60/0/-60] s honeycomb composite panel. The out-of-plane velocities are measured at a fixed location normal to the surface by a laser Doppler vibrometer (LDV). An ultrasonic full wavefield assembled from the three-dimensional space-time data matrix in the interrogated area is first acquired and then processed for imaging the impacted damage area. A wavenumber filtering technique in terms of wave vectors is applied to distinguish the forward and backward wavefields in the wavenumber-frequency domain. A zero-lag cross correlation (ZLCC) imaging condition is then employed in the space-frequency domain for damage imaging. The ZLCC imaging condition consists of cross correlating the incident and reflected wavefields in the entire scanned region. The condition not only images the damage boundary between incident and reflected waves outside the damage region but also, for longer time windows, enables to capture the momentary standing waves formed within the damaged region. The ZLCC imaging condition imaged two delaminated region: a main delamination, which was a skewed elliptic with major and minor axis lengths roughly 17 mm and 10 mm respectively, and a secondary delamination region approximately 6 mm by 4 mm, however, which can only be shown at higher frequency range around 80-95 kHz. To conclude, the ZLCC results were in very good agreement with ultrasonic C-scan and X-ray computed tomographic (X-ray CT) scan results. Since the imaging condition is performed in the space-frequency domain, the imaging from ZLCC can also reveal resonance modes which are shown in the main delaminated area by windowing a narrow frequency band sequentially. Published by Elsevier B.V.

Active control of sound transmission through a rectangular panel using point-force actuators and piezoelectric film sensors.

PubMed

Sanada, Akira; Higashiyama, Kouji; Tanaka, Nobuo

2015-01-01

This study deals with the active control of sound transmission through a rectangular panel, based on single input, single output feedforward vibration control using point-force actuators and piezoelectric film sensors. It focuses on the phenomenon in which the sound power transmitted through a finite-sized panel drops significantly at some frequencies just below the resonance frequencies of the panel in the low-frequency range as a result of modal coupling cancellation. In a previous study, it was shown that when point-force actuators are located on nodal lines for the frequency at which this phenomenon occurs, a force equivalent to the incident sound wave can act on the panel. In this study, a practical method for sensing volume velocity using a small number of piezoelectric film strips is investigated. It is found that two quadratically shaped piezoelectric film strips, attached at the same nodal lines as those where the actuators were placed, can sense the volume velocity approximately in the low-frequency range. Results of simulations show that combining the proposed actuation method and the sensing method can achieve a practical control effect at low frequencies over a wide frequency range. Finally, experiments are carried out to demonstrate the validity and feasibility of the proposed method.

An investigation of a reticulated foam - perforated steel sheet combination as a blast mitigation structure

NASA Astrophysics Data System (ADS)

Nguyen, Thuy-Tien N.; Proud, William G.

2017-01-01

Explosions are one of the main causes of injuries during battles and conflicts, with improvised explosive devices (IEDs) becoming increasingly common. Blast waves produced from such explosions can inflict very complex injuries on human and serious damage to structures. Here, the interaction between blast waves and sandwich structures of reticulated foam and perforated sheets is studied using a shock tube. The level of mitigation for primary blast injuries of these structures are discussed in terms of pulse shape, pressure magnitude and impulse. Schlieren photography and other high-speed imaging were used to capture the form of the blast wave. The results show up to 95% mitigation in both pressure and impulse with the structures studied. The behaviors of these mitigating sandwich panels under two loadings, Mach 2.0 and Mach 2.6, are also discussed.

The supersonic triplet - A new aerodynamic panel singularity with directional properties. [internal wave elimination

NASA Technical Reports Server (NTRS)

Woodward, F. A.; Landrum, E. J.

1979-01-01

A new supersonic triplet singularity has been developed which eliminates internal waves generated by panels having supersonic edges. The triplet is a linear combination of source and vortex distributions which provides the desired directional properties in the flow field surrounding the panel. The theoretical development of the triplet is described, together with its application to the calculation of surface pressure on arbitrary body shapes. Examples are presented comparing the results of the new method with other supersonic panel methods and with experimental data.

Does Viewing Pornography Diminish Religiosity Over Time? Evidence From Two-Wave Panel Data.

PubMed

Perry, Samuel L

2017-02-01

Research consistently shows a negative association between religiosity and viewing pornography. While scholars typically assume that greater religiosity leads to less frequent pornography use, none have empirically examined whether the reverse could be true: that greater pornography use may lead to lower levels of religiosity over time. I tested for this possibility using two waves of the nationally representative Portraits of American Life Study (PALS). Persons who viewed pornography at all at Wave 1 reported more religious doubt, lower religious salience, and lower prayer frequency at Wave 2 compared to those who never viewed porn. Considering the effect of porn-viewing frequency, viewing porn more often at Wave 1 corresponded to increases in religious doubt and declining religious salience at Wave 2. However, the effect of earlier pornography use on later religious service attendance and prayer was curvilinear: Religious service attendance and prayer decline to a point and then increase at higher levels of pornography viewing. Testing for interactions revealed that all effects appear to hold regardless of gender. Findings suggest that viewing pornography may lead to declines in some dimensions of religiosity but at more extreme levels may actually stimulate, or at least be conducive to, greater religiosity along other dimensions.

Adolescent Alcohol Use Self-Report Stability: A Decade of Panel Study Data

ERIC Educational Resources Information Center

Shillington, Audrey M.; Clapp, John D.; Reed, Mark B.; Woodruff, Susan I.

2011-01-01

This study analyzed six waves of panel data from the National Longitudinal Survey of Youth (NLSY). These analyses were conducted to test the stability of self-reported lifetime use and age of onset. Intraclass correlation coefficients (ICCs) indicated that the stability of age of onset reports decreased with longer time frames between follow-ups.…

In-Situ Wave Observations in the High Resolution Air-Sea Interaction DRI

DTIC Science & Technology

2008-09-30

Program ( CDIP ) Harvest buoy located in 204 m depth off Point Conception. The initial sea surface is assumed Gaussian and homogeneous, with spectral...of simulated sea surface elevation. Right panels: corresponding observed frequency-directional wave spectra (source: CDIP ). Upper panels: Typical

Lamb wave propagation in monocrystalline silicon wafers.

PubMed

Fromme, Paul; Pizzolato, Marco; Robyr, Jean-Luc; Masserey, Bernard

2018-01-01

Monocrystalline silicon wafers are widely used in the photovoltaic industry for solar panels with high conversion efficiency. Guided ultrasonic waves offer the potential to efficiently detect micro-cracks in the thin wafers. Previous studies of ultrasonic wave propagation in silicon focused on effects of material anisotropy on bulk ultrasonic waves, but the dependence of the wave propagation characteristics on the material anisotropy is not well understood for Lamb waves. The phase slowness and beam skewing of the two fundamental Lamb wave modes A 0 and S 0 were investigated. Experimental measurements using contact wedge transducer excitation and laser measurement were conducted. Good agreement was found between the theoretically calculated angular dependency of the phase slowness and measurements for different propagation directions relative to the crystal orientation. Significant wave skew and beam widening was observed experimentally due to the anisotropy, especially for the S 0 mode. Explicit finite element simulations were conducted to visualize and quantify the guided wave beam skew. Good agreement was found for the A 0 mode, but a systematic discrepancy was observed for the S 0 mode. These effects need to be considered for the non-destructive testing of wafers using guided waves.

An Examination of Persistence in Charitable Giving to Education through the 2002 Economic Downturn

ERIC Educational Resources Information Center

Wu, Ke; Brown, Melissa S.

2010-01-01

Using three waves of the Center on Philanthropy Panel Study, a module of the Panel Study of Income Dynamics, fielded by the Institute for Social Research at the University of Michigan, we examine characteristics of donors who gave to any level of education in each of the years studied (2000, 2002 and 2004). We find that these persistent donors to…

The Shock and Vibration Digest, Volume 14, Number 2, February 1982

DTIC Science & Technology

1982-02-01

figurations. 75 4J DUCTS 82-424 (Also see No. 346) Coupling Lou Factors for Statistical Energy Analysis of Sound Transnission at Rectangular...waves, Sound waves, Wave props- tures by means of statistical energy analysis (SEA) coupling gation loss factors for the structure-borne sound...multilayered panels are discussed. Statistical energy analysis (SEA) has proved to be a promising Experimental results of stiffened panels, damping tape

Impact damage imaging in a curved composite panel with wavenumber index via Riesz transform

NASA Astrophysics Data System (ADS)

Chang, Huan-Yu; Yuan, Fuh-Gwo

2018-03-01

The barely visible impact damages reduce the strength of composite structures significantly; however, they are difficult to be detected during regular visual inspection. A guided wave based damage imaging condition method is developed and applied on a curved composite panel, which is a part of an aileron from a retired Boeing C-17 Globemaster III. Ultrasonic guided waves are excited by a piezoelectric transducer (PZT) and then captured by a laser Doppler vibrometer (LDV). The wavefield images are constructed by measuring the out-of-plane velocity point by point within interrogation region, and the anomalies at the damage area can be observed with naked eye. The discontinuities of material properties leads to the change of wavenumber while the wave propagating through the damaged area. These differences in wavenumber can be observed by deriving instantaneous wave vector via Riesz transform (RT), and then be shown and highlighted with the proposed imaging condition named wavenumber index (WI). RT can be introduced as a two-dimensional (2-D) generalization of Hilbert transform (HT) to derive instantaneous phases, amplitudes, orientations of a guided-wave field. WI employs the instantaneous wave vector and weighted instantaneous wave energy computed from the instantaneous amplitudes, yielding high sensitivity and sharp damage image with computational efficiency. The BVID of the composite structure becomes therefore "visible" with the developed technique.

A structural equation model of turnover for a longitudinal survey among early career registered nurses.

PubMed

Brewer, Carol S; Chao, Ying-Yu; Colder, Craig R; Kovner, Christine T; Chacko, Thomas P

2015-11-01

Key predictors of early career nurses' turnover are job satisfaction, organizational commitment, job search, intent to stay, and shock (back injuries) based on the literature review and our previous research. Existing research has often omitted one of these key predictors. The purpose of this study in a sample of early career nurses was to compare predictors of turnover to nurses' actual turnover at two time points in their careers. A multi-state longitudinal panel survey of early career nurses was used to compare a turnover model across two time periods. The sample has been surveyed five times. The sample was selected using a two-stage sample of registered nurses nested in 51 metropolitan areas and nine non-metropolitan, rural areas in 34 states and the District of Columbia. The associations between key predictors of turnover were tested using structural equation modeling and data from the earliest and latest panels in our study. We used predictors from the respondents who replied to the Wave-1 survey in 2006 and their turnover status from Wave 2 in 2007 (N=2386). We compared these results to the remaining respondents' predictors from Wave 4 in 2011 and their turnover status in Wave 5 in 2013 (N=1073). We tested and found no effect for missingness from Wave 1-5 and little evidence of attrition bias. Strong support was found for the relationships hypothesized among job satisfaction, organizational commitment, intent to stay, and turnover, with some support for shock and search in the Wave 1-2 sample. However, for Wave 4-5 sample (n=1073), none of the paths through search were significant, nor was the path from shock to turnover. Nurses in the second analysis who had matured longer in their career did not have a significant response to search or shock (back injuries), which may indicate how easily experienced registered nurses find new jobs and/or accommodation to jobs requiring significant physicality. Nurse turnover is a major concern for healthcare organizations because of its costs and related outcomes. The relevant strength and relationships of these key turnover predictors will be informative to employers for prioritizing strategies to retain their registered nurse workforce. We need more research on programs that implement changes in the work environment that impact these two outcomes, as well as research that focuses on the relevant strength or impact to help administrators prioritize translation of results. Copyright © 2015 Elsevier Ltd. All rights reserved.

External mean flow influence on sound transmission through finite clamped double-wall sandwich panels

NASA Astrophysics Data System (ADS)

Liu, Yu; Catalan, Jean-Cédric

2017-09-01

This paper studies the influence of an external mean flow on the sound transmission through finite clamped double-wall sandwich panels lined with poroelastic materials. Biot's theory is employed to describe wave propagation in poroelastic materials and various configurations of coupling the poroelastic layer to the facing plates are considered. The clamped boundary of finite panels are dealt with by the modal superposition theory and the weighted residual (Garlekin) method, leading to a matrix equation solution for the sound transmission loss (STL) through the structure. The theoretical model is validated against existing theories of infinite sandwich panels with and without an external flow. The numerical results of a single incident wave show that the external mean flow has significant effects on the STL which are coupled with the clamped boundary effect dominating in the low-frequency range. The external mean flow also influences considerably the limiting incidence angle of the panel system and the effect of the incidence angle on the STL. However, the influences of the azimuthal angle and the external flow orientation are negligible.

School Connectedness and Chinese Adolescents' Sleep Problems: A Cross-Lagged Panel Analysis

ERIC Educational Resources Information Center

Bao, Zhenzhou; Chen, Chuansheng; Zhang, Wei; Jiang, Yanping; Zhu, Jianjun; Lai, Xuefen

2018-01-01

Background: Although previous research indicates an association between school connectedness and adolescents' sleep quality, its causal direction has not been determined. This study used a 2-wave cross-lagged panel analysis to explore the likely causal direction between these 2 constructs. Methods: Participants were 888 Chinese adolescents (43.80%…

Method of Making a Composite Panel Having Subsonic Transverse Wave Speed Characteristics

NASA Technical Reports Server (NTRS)

Palumbo, Daniel L. (Inventor); Klos, Jacob (Inventor)

2012-01-01

A method of making a composite panel having subsonic transverse wave speed characteristics which has first and second sheets sandwiching a core with at least one of the sheets being attached to the core at first regions thereof and unattached to the core at second regions thereof.

Sound transmission through lightweight double-leaf partitions: theoretical modelling

NASA Astrophysics Data System (ADS)

Wang, J.; Lu, T. J.; Woodhouse, J.; Langley, R. S.; Evans, J.

2005-09-01

This paper presents theoretical modelling of the sound transmission loss through double-leaf lightweight partitions stiffened with periodically placed studs. First, by assuming that the effect of the studs can be replaced with elastic springs uniformly distributed between the sheathing panels, a simple smeared model is established. Second, periodic structure theory is used to develop a more accurate model taking account of the discrete placing of the studs. Both models treat incident sound waves in the horizontal plane only, for simplicity. The predictions of the two models are compared, to reveal the physical mechanisms determining sound transmission. The smeared model predicts relatively simple behaviour, in which the only conspicuous features are associated with coincidence effects with the two types of structural wave allowed by the partition model, and internal resonances of the air between the panels. In the periodic model, many more features are evident, associated with the structure of pass- and stop-bands for structural waves in the partition. The models are used to explain the effects of incidence angle and of the various system parameters. The predictions are compared with existing test data for steel plates with wooden stiffeners, and good agreement is obtained.

Fatigue disbonding analysis of wide composite panels by means of Lamb waves

NASA Astrophysics Data System (ADS)

Michalcová, Lenka; Rechcígel, Lukáš; Bělský, Petr; Kucharský, Pavel

2018-03-01

Guided wave-based monitoring of composite structures plays an important role in the area of structural health monitoring (SHM) of aerospace structures. Adhesively bonded joints have not yet fulfilled current airworthiness requirements; hence, assemblies of carbon fibre-reinforced parts still require mechanical fasteners, and a verified SHM method with reliable disbonding/delamination detection and propagation assessment is needed. This study investigated the disbonding/delamination propagation in adhesively bonded panels using Lamb waves during fatigue tests. Analyses focused on the proper frequency and mode selection, sensor placement and selection of parameter sensitive to the growth of disbonding areas. Piezoelectric transducers placed across the bonded area were used as actuators and sensors. Lamb wave propagation was investigated considering the actual shape of the crack front and the mode of the crack propagation. The actual cracked area was determined by ultrasonic A-scans. A correlation between the crack propagation rate and the A0 mode velocity was found.

Intrinsic motivation, performance, and the mediating role of mastery goal orientation: a test of self-determination theory.

PubMed

Cerasoli, Christopher P; Ford, Michael T

2014-01-01

Although intrinsic motivation has been linked repeatedly to performance and outcomes, the causal relationship between the two has remained unclear. To explain the link, this study considered the focusing influence of mastery goals. Using a three-wave panel study and hypotheses drawn from self-determination theory and achievement goal theory, the current study sought to clarify the relationships between intrinsic motivation, mastery goal orientation, and performance. Specifically, the current study hypothesized and found that mastery goals mediated (explained) the relationship between intrinsic motivation and performance.

Nonlinear acoustics and honeycomb materials

NASA Astrophysics Data System (ADS)

Thompson, D. O.

2012-05-01

The scope of research activity that Bruce Thompson embraced was very large. In this talk three different research topics that the author shared with Bruce are reviewed. They represent Bruce's introduction to NDE and include nonlinear acoustics, nondestructive measurements of adhesive bond strengths in honeycomb panels, and studies of flexural wave dispersion in honeycomb materials. In the first of these, four harmonics of a 30 Mhz finite amplitude wave were measured for both fused silica and aluminum single crystals with varying lengths and amounts of cold work using a capacity microphone with heterodyne receiver with a flat frequency response from 30 to 250 Mhz. The results for fused silica with no dislocation structure could be described by a model due to Fubini, originally developed for gases, that depends upon only the second and third order elastic constants and not the fourth and higher order constants. The same was not true for the aluminum with dislocation structures. These results raised some questions about models for harmonic generation in materials with dislocations. In the second topic, experiments were made to determine the adhesive bond strengths of honeycomb panels using the vibrational response of the panels (Chladni figures). The results showed that both the damping characteristics of panel vibrations as a whole and velocity of propagation of elastic waves that travel along the surface and sample the bondline can be correlated with destructively determined bond strengths. Finally, the phase velocity of flexural waves traveling along a 1-inch honeycomb sandwich panel was determined from 170 Hz to 50 Khz, ranging from 2.2×104 cm/sec at the low end to 1.18×105 cm/sec at 40 Khz. The dispersion arises from the finite thickness of the panel and agreed with the results of continuum models for the honeycomb. Above 40 Khz, this was not the case. The paper concludes with a tribute to Bruce for his many wonderful contributions and lessons beyond his technical legacy for all of us.

Chemically amplified i-line positive resist for next-generation flat panel display

NASA Astrophysics Data System (ADS)

Lee, Hsing-Chieh; Lu, Ying-Hao; Huang, Shin-Yih; Lan, Wei-Jen; Hanabata, Makoto

2017-03-01

Traditional diazonaphthoquinone (DNQ) positive photoresists are widely used for TFT-LCD array process. Current LTPS technology has more than 600ppi resolution is required for small or middle-sized TFT liquid crystal display panels. One of the ways to enhance resolution is to apply i-line single exposure system instead of traditional g/h/ibroadband exposure system. We have been developing i-line chemically amplified photoresist ECA 200 series for the next generation flat panel display (FPD). ECA 200 consists of three components: a phenol resin, a photo acid generator and dissolution enhancer. We applied two different types of dissolution enhancers with two different kinds of protected groups to our resist materials. As a result, we achieved higher sensitivity, higher resolution, less footing of the resist profile and reduced standing wave effect compared with traditional DNQ photoresists. In addition, we have found further property of photoresist that does not need post exposure bake (PEB) process. This resist has a great advantage at most of current panel plants without PEB process.

Can Cultural Worldviews Influence Network Composition?

ERIC Educational Resources Information Center

Vaisey, Stephen; Lizardo, Omar

2010-01-01

Most sociological research assumes that social network composition shapes individual beliefs. Network theory and research has not adequately considered that internalized cultural worldviews might affect network composition. Drawing on a synthetic, dual-process theory of culture and two waves of nationally-representative panel data, this article…

Panel Conditioning in the General Social Survey

ERIC Educational Resources Information Center

Halpern-Manners, Andrew; Warren, John Robert; Torche, Florencia

2017-01-01

Does participation in one wave of a survey have an effect on respondents' answers to questions in subsequent waves? In this article, we investigate the presence and magnitude of "panel conditioning" effects in one of the most frequently used data sets in the social sciences: the General Social Survey (GSS). Using longitudinal records…

Explaining the Relationship Between Sexually Explicit Internet Material and Casual Sex: A Two-Step Mediation Model.

PubMed

Vandenbosch, Laura; van Oosten, Johanna M F

2018-07-01

Despite increasing interest in the implications of adolescents' use of sexually explicit Internet material (SEIM), we still know little about the relationship between SEIM use and adolescents' casual sexual activities. Based on a three-wave online panel survey study among Dutch adolescents (N = 1079; 53.1% boys; 93.5% with an exclusively heterosexual orientation; M age  = 15.11; SD = 1.39), we found that watching SEIM predicted engagement in casual sex over time. In turn, casual sexual activities partially predicted adolescents' use of SEIM. A two-step mediation model was tested to explain the relationship between watching SEIM and casual sex. It was partially confirmed. First, watching SEIM predicted adolescents' perceptions of SEIM as a relevant information source from Wave 2 to Wave 3, but not from Wave 1 to Wave 2. Next, such perceived utility of SEIM was positively related to stronger instrumental attitudes toward sex and thus their views about sex as a core instrument for sexual gratification. Lastly, adolescents' instrumental attitudes toward sex predicted adolescents' engagement in casual sex activities consistently across waves. Partial support emerged for a reciprocal relationship between watching SEIM and perceived utility. We did not find a reverse relationship between casual sex activities and instrumental attitudes toward sex. No significant gender differences emerged.

Wills, Trusts, and Charitable Estate Planning: An Analysis of Document Effectiveness Using Panel Data

ERIC Educational Resources Information Center

James, Russell N., III

2009-01-01

This paper compares pre-death charitable testamentary expectations with post-death distributions for deceased panel members in the 1995-2006 Health and Retirement Study. Most respondents who reported having a charitable estate plan in the survey wave immediately prior to their death ultimately generated no charitable estate gift after death.…

Longitudinal patterns of problematic computer game use among adolescents and adults--a 2-year panel study.

PubMed

Scharkow, Michael; Festl, Ruth; Quandt, Thorsten

2014-11-01

To investigate the longitudinal patterns (stability and change) of problematic computer game use and its interdependencies with psychosocial wellbeing in different age groups. Three-wave, annual panel study using computer-assisted telephone surveys. Germany. A total of 112 adolescents aged between 14 and 18 years, 363 younger adults between 19-39 years and 427 adults aged 40 years and older (overall n = 902). Problematic game use was measured with the Gaming Addiction Short Scale (GAS), which covers seven criteria including salience, withdrawal and conflict. Additionally, gaming behaviour and psychosocial wellbeing (social capital and support, life satisfaction and success) were measured in all three panel waves. The generally low GAS scores were very stable in yearly intervals [average autocorrelation across waves and age groups: r = 0.74, confidence interval (CI) = 0.71, 0.77]. Only nine respondents (1%, CI = 0.5, 1.9) consistently exhibited symptoms of problematic game use across all waves, while no respondent could be classified consistently as being addicted according to the GAS criteria. Changes in problematic gaming were not related consistently to changes in psychosocial wellbeing, although some cross-lagged effects were statistically significant in younger and older adult groups. Within a 2-year time-frame, problematic use of computer games appears to be a less stable behaviour than reported previously and not related systematically to negative changes in the gamers' lives. © 2014 Society for the Study of Addiction.

Finite Element Development of Honeycomb Panel Configurations with Improved Transmission Loss

NASA Technical Reports Server (NTRS)

Grosveld, Ferdinand W.; Palumbo, Daniel L.; Klos, Jacob; Castle, William D.

2006-01-01

The higher stiffness-to-mass ratio of a honeycomb panel compared to a homogeneous panel results in a lower acoustic critical frequency. Above the critical frequency the panel flexural wave speed is acoustically fast and the structure becomes a more efficient radiator with associated lower sound transmission loss. Finite element models of honeycomb sandwich structures are presented featuring areas where the core is removed from the radiating face sheet disrupting the supersonic flexural and shear wave speeds that exist in the baseline honeycomb panel. These modified honeycomb panel structures exhibit improved transmission loss for a pre-defined diffuse field sound excitation. The models were validated by the sound transmission loss of honeycomb panels measured in the Structural Acoustic Loads and Transmission (SALT) facility at the NASA Langley Research Center. A honeycomb core panel configuration is presented exhibiting a transmission loss improvement of 3-11 dB compared to a honeycomb baseline panel over a frequency range from 170 Hz to 1000 Hz. The improved transmission loss panel configuration had a 5.1% increase in mass over the baseline honeycomb panel, and approximately twice the deflection when excited by a static force.

Microwave and Millimeter Wave Testing for the Inspection of the Space Shuttle Spray on Foam Insulations (SOFI) and the Acreage Heat Tiles

NASA Technical Reports Server (NTRS)

Zoughi, R.; Kharkovsky, S.; Hepburn, F. L.

2005-01-01

The utility of microwave and millimeter wave nondestructive testing and evaluation (NDT&E) methods, for testing the Space Shuttle's external he1 tank spray on foam insulation (SOFI) and the acreage heat tiles has been investigated during the past two years. Millimeter wave NDE techniques are capable of producing internal images of SOFI. This paper presents the results of testing several diverse panels with embedded voids and debonds at millimeter wave frequencies. Additionally, the results of testing a set of heat tiles are also presented. Finally, the attributes of these methods as well as the advantageous features associated with these systems are also provided.

Plasma Waves Associated with Energetic Particles Streaming into the Solar Wind from the Earth’s Bow Shock.

DTIC Science & Technology

1980-12-08

when the magnetic field changed in such a way that the ISEE spacecraft were brought into the ion foreshock region. The lower panels of Figures 1 and 2...electrons in the absence of ions usually occurs when the spacecraft is downstream from the electron foreshock boundary but upstream of the ion... foreshock boundary. Two well-defined upstream ion events occur in the following hour as shown in Figure 5. The top panel shows that a moderately intense ion

A research program to reduce interior noise in general aviation airplanes

NASA Technical Reports Server (NTRS)

Peschier, T. D.; Andrews, D.; Henderson, T.

1977-01-01

The relevance of KU-FRL test results in predicting (theoretically or semi-empirically) interior noise levels in general aviation aircraft was studied. As a result of this study, it was decided to make a few additions to the program. These additions are: (1) to use three (instead of two) noise sources in the plane wave tube to evaluate the influence of excitation spectrum on panel response, (2) to use theoretical and experimental data obtained in the course of the project to develop more efficient noise reduction materials (or procedures to apply these), or to develop guidelines for the design of such materials for procedures, and (3) to use nonstructural materials in the collection of specimens to be tested in the KU-FRL plane wave tube.

Nonlinear vibration and radiation from a panel with transition to chaos

NASA Technical Reports Server (NTRS)

Maestrello, Lucio; Frendi, Abdelkader; Brown, Donald E.

1992-01-01

The dynamic response of an aircraft panel forced at resonance and off-resonance by plane acoustic waves at normal incidence is investigated experimentally and numerically. Linear, nonlinear (period doubling), and chaotic responses are obtained by increasing the sound pressure level of the excitation. The response time history is sensitive to the input level and to the frequency of excitation. The change in response behavior is due to a change in input conditions, triggered either naturally or by modulation of the bandwidth of the incident waves. Off-resonance bifurcation is diffused and difficult to maintain; thus the panel response drifts into a linear behavior. The acoustic pressure emanated by the panel is either linear or nonlinear as is the vibration response. The nonlinear effects accumulate during the propagation with distance. Results are also obtained on the control of the panel response using damping tape on an aluminum panel and a graphite epoxy panel having the same size and weight. Good agreement is obtained betwen the experimental and numerical results.

Integrated Structural/Acoustic Modeling of Heterogeneous Panels

NASA Technical Reports Server (NTRS)

Bednarcyk, Brett, A.; Aboudi, Jacob; Arnold, Steven, M.; Pennline, James, A.

2012-01-01

A model for the dynamic response of heterogeneous media is presented. A given medium is discretized into a number of subvolumes, each of which may contain an elastic anisotropic material, void, or fluid, and time-dependent boundary conditions are applied to simulate impact or incident pressure waves. The full time-dependent displacement and stress response throughout the medium is then determined via an explicit solution procedure. The model is applied to simulate the coupled structural/acoustic response of foam core sandwich panels as well as aluminum panels with foam inserts. Emphasis is placed on the acoustic absorption performance of the panels versus weight and the effects of the arrangement of the materials and incident wave frequency.

Predicting Social Integration in the Community among College Students

ERIC Educational Resources Information Center

Herrero, Juan; Gracia, Enrique

2004-01-01

This article aims to examine determinants of social integration in the community among college students. Two-wave panel data from an undergraduate student sample (N = 310) was used to explore the effects of multiple sets of variables (personal, interpersonal, and situational) on social integration in the community. Structural equation analysis…

Interaction of Sound from Supersonic Jets with Nearby Structures

NASA Technical Reports Server (NTRS)

Fenno, C. C., Jr.; Bayliss, A.; Maestrello, L.

1997-01-01

A model of sound generated in an ideally expanded supersonic (Mach 2) jet is solved numerically. Two configurations are considered: (1) a free jet and (2) an installed jet with a nearby array of flexible aircraft type panels. In the later case the panels vibrate in response to loading by sound from the jet and the full coupling between the panels and the jet is considered, accounting for panel response and radiation. The long time behavior of the jet is considered. Results for near field and far field disturbance, the far field pressure and the vibration of and radiation from the panels are presented. Panel response crucially depends on the location of the panels. Panels located upstream of the Mach cone are subject to a low level, nearly continuous spectral excitation and consequently exhibit a low level, relatively continuous spectral response. In contrast, panels located within the Mach cone are subject to a significant loading due to the intense Mach wave radiation of sound and exhibit a large, relatively peaked spectral response centered around the peak frequency of sound radiation. The panels radiate in a similar fashion to the sound in the jet, in particular exhibiting a relatively peaked spectral response at approximately the Mach angle from the bounding wall.

Detecting delaminations and disbondings on full-scale wing composite panel by guided waves based SHM system

NASA Astrophysics Data System (ADS)

Monaco, E.; Boffa, N. D.; Memmolo, V.; Ricci, F.; Maio, L.

2016-04-01

A full-scale lower wing panel made of composite material has been designed, manufactured and sensorised within the European Funded research project named SARISTU. The authors contributed to the whole development of the system, from design to implementation as well as to the impacts campaign phase where Barely Visible and Visible Damages (BVID and VID) are to be artificially induced on the panel by a pneumatic impact machine. This work summarise part of the experimental results related to damages production, their assessment by C-SCAN as reference NDT method as well as damage detection of delimitations by a guided waves based SHM. The SHM system is made by customized piezoelectric patches secondary bonded on the wing plate acting both as guided waves sources and receivers. The paper will deal mostly with the experimental impact campaign and the signal analyses carried out to extract the metrics more sensitive to damages induced. Image reconstruction of the damages dimensions and shapes will be also described based mostly on the combination of metrics maps over the plate partial surfaces. Finally a comparison of damages maps obtained by the SHM approach and those obtained by "classic" C-SCAN will be presented analyzing briefly pros and cons of the two different approached as a combination to the most effective structural maintenance scenario of a commercial aircraft.

A modelling approach for the vibroacoustic behaviour of aluminium extrusions used in railway vehicles

NASA Astrophysics Data System (ADS)

Xie, G.; Thompson, D. J.; Jones, C. J. C.

2006-06-01

Modern railway vehicles are often constructed from double walled aluminium extrusions, which give a stiff, light construction. However, the acoustic performance of such panels is less satisfactory, with the airborne sound transmission being considerably worse than the mass law for the equivalent simple panel. To compensate for this, vehicle manufacturers are forced to add treatments such as damping layers, absorptive layers and floating floors. Moreover, a model for extruded panels that is both simple and reliable is required to assist in the early stages of design. An statistical energy analysis (SEA) model to predict the vibroacoustic behaviour of aluminium extrusions is presented here. An extruded panel is represented by a single global mode subsystem and three subsystems representing local modes of the various strips which occur for frequencies typically above 500 Hz. An approximate model for the modal density of extruded panels is developed and this is verified using an FE model. The coupling between global and local modes is approximated with the coupling between a travelling global wave and uncorrelated local waves. This model enables the response difference across the panels to be predicted. For the coupling with air, the average radiation efficiency of a baffled extruded panel is modelled in terms of the contributions from global and local modes. Experimental studies of a sample extruded panel have also been carried out. The vibration of an extruded panel under mechanical excitation is measured for various force positions and the vibration distribution over the panel is obtained in detail. The radiation efficiencies of a free extruded panel have also been measured. The complete SEA model of a panel is finally used to predict the response of the extruded panel under mechanical and acoustic excitations. Especially for mechanical excitation, the proposed SEA model gives a good prediction compared with the measurement results.

The Effect of Differential Incentives on Attrition Bias: Evidence from the PASS Wave 3 Incentive Experiment

ERIC Educational Resources Information Center

Felderer, Barbara; Müller, Gerrit; Kreuter, Frauke; Winter, Joachim

2018-01-01

Respondent incentives are widely used to increase response rates, but their effect on nonresponse bias has not been researched as much. To contribute to the research, we analyze an incentive experiment embedded within the third wave of the German household panel survey "Panel Labor Market and Social Security" conducted by the German…

Does food insecurity affect parental characteristics and child behavior? Testing mediation effects.

PubMed

Huang, Jin; Oshima, Karen M Matta; Kim, Youngmi

2010-01-01

Using two waves of data from the Child Development Supplement in the Panel Study of Income Dynamics, this study investigates whether parental characteristics (parenting stress, parental warmth, psychological distress, and parent's self-esteem) mediate household food insecurity's relations with child behavior problems. Fixed-effects analyses examine data from a low-income sample of 416 children from 249 households. This study finds that parenting stress mediates the effects of food insecurity on child behavior problems. However, two robustness tests produce different results from those of the fixed-effects models. This inconsistency suggests that household food insecurity's relations to the two types of child behavior problems need to be investigated further with a different methodology and other measures.

Two-Year Stability and Change in Access to and Reasons for Lacking a Usual Source of Care Among Working-Age US Adults.

PubMed

Stransky, Michelle L

The objective of this study was to investigate usual source of care (USC) over time. A nationally representative sample of working-age adults in the Medical Expenditure Panel Survey (Panels 16 [2011-2012] and 17 [2012-2013]) was divided into 3 groups based on USC questions asked during 2 waves: (1) those having a USC during both waves (always USC), (2) those not having a USC during either wave (never USC), and (3) those who gained or lost a USC between the 2 waves (changed USC). The study examined the sociodemographic and health characteristics associated with these groups and the main reasons for not having a USC among those who never had a USC and those who changed their USC. Of the 10 792 adults in the analysis, a longitudinally weighted 18.8% reported that their USC changed during the period. Among adults in the changed USC group, those with private (odds ratio [OR] = 2.0, P = .001) or public (OR = 2.2, P = .001) health insurance and 1 (OR = 1.7, P = .04) or ≥2 (OR = 3.1, P = .02) chronic health conditions were more likely to transition to having a USC from not having a USC, compared with those who had no insurance and no chronic conditions. Compared with those in the changed USC group, those in the never USC group were more likely to report preferring not to have a USC (57.9% vs 80.1%, P < .001). Insurance and public health policies and programs are needed to reduce short-term changes in USC and increase the number of adults with ongoing, consistent USC.

Microwave and Millimeter Wave Nondestructive Evaluation of the Space Shuttle External Tank Insulating Foam

NASA Technical Reports Server (NTRS)

Shrestha, S.; Kharkovsky, S.; Zoughi, R.; Hepburn, F

2005-01-01

The Space Shuttle Columbia s catastrophic failure has been attributed to a piece of external fuel tank insulating SOFI (Spray On Foam Insulation) foam striking the leading edge of the left wing of the orbiter causing significant damage to some of the protecting heat tiles. The accident emphasizes the growing need to develop effective, robust and life-cycle oriented methods of nondestructive testing and evaluation (NDT&E) of complex conductor-backed insulating foam and protective acreage heat tiles used in the space shuttle fleet and in future multi-launch space vehicles. The insulating SOFI foam is constructed from closed-cell foam. In the microwave regime this foam is in the family of low permittivity and low loss dielectric materials. Near-field microwave and millimeter wave NDT methods were one of the techniques chosen for this purpose. To this end several flat and thick SOFI foam panels, two structurally complex panels similar to the external fuel tank and a "blind" panel were used in this investigation. Several anomalies such as voids and disbonds were embedded in these panels at various locations. The location and properties of the embedded anomalies in the "blind" panel were not disclosed to the investigating team prior to the investigation. Three frequency bands were used in this investigation covering a frequency range of 8-75 GHz. Moreover, the influence of signal polarization was also investigated. Overall the results of this investigation were very promising for detecting the presence of anomalies in different panels covered with relatively thick insulating SOFI foam. Different types of anomalies were detected in foam up to 9 in thick. Many of the anomalies in the more complex panels were also detected. When investigating the blind panel no false positives were detected. Anomalies in between and underneath bolt heads were not easily detected. This paper presents the results of this investigation along with a discussion of the capabilities of the method used.

Reciprocal Associations between Connectedness and Autonomy among Korean Adolescents: Compatible or Antithetical?

ERIC Educational Resources Information Center

Yu, Jeong Jin

2011-01-01

The primary goal of this study was to examine the longitudinal reciprocal relationships between connectedness to parents and autonomy among Korean adolescents using five annual waves of the Korea Youth Panel Survey. The sample consisted of 3,449 adolescents, whose mean age was 13.79 years at Wave 1. Contrary to the mainstream findings in…

Studies of Sound Absorption by and Transmission Through Layers of Elastic Noise Control Foams: Finite Element Modeling and Effects of Anisotropy

NASA Astrophysics Data System (ADS)

Kang, Yeon June

In this thesis an elastic-absorption finite element model of isotropic elastic porous noise control materials is first presented as a means of investigating the effects of finite dimension and edge constraints on the sound absorption by, and transmission through, layers of acoustical foams. Methods for coupling foam finite elements with conventional acoustic and structural finite elements are also described. The foam finite element model based on the Biot theory allows for the simultaneous propagation of the three types of waves known to exist in an elastic porous material. Various sets of boundary conditions appropriate for modeling open, membrane-sealed and panel-bonded foam surfaces are formulated and described. Good agreement was achieved when finite element predictions were compared with previously established analytical results for the plane wave absorption coefficient and transmission loss in the case of wave propagation both in foam-filled waveguides and through foam-lined double panel structures of infinite lateral extent. The primary effect of the edge constraints of a foam layer was found to be an acoustical stiffening of the foam. Constraining the ends of the facing panels in foam-lined double panel systems was also found to increase the sound transmission loss significantly in the low frequency range. In addition, a theoretical multi-dimensional model for wave propagation in anisotropic elastic porous materials was developed to study the effect of anisotropy on the sound transmission of foam-lined noise control treatments. The predictions of the theoretical anisotropic model have been compared with experimental measurements for the random incidence sound transmission through double panel structure lined with polyimide foam. The predictions were made by using the measured and estimated macroscopic physical parameters of polyimide foam samples which were known to be anisotropic. It has been found that the macroscopic physical parameters in the direction normal to the face of foam layer play the principal role in determining the acoustical behavior of polyimide foam layers, although more satisfactory agreement between experimental measurements and theoretical predictions of transmission loss is obtained when the anisotropic properties are allowed in the model.

Five Thousand American Families--Patterns of Economic Progress. Volume V: Components of Change in Family Well-Being and Other Analyses of the First Eight Years of the Panel Study of Income Dynamics.

ERIC Educational Resources Information Center

Duncan, Greg J., Ed.; Morgan, James N., Ed.

This volume contains analyses of data from the first eight waves of the Panel Study of Income Dynamics. The first part of this volume attempts to evaluate the relative importance of family composition changes, labor force participation decisions, and changes in earnings for the black and white families studied. The second part deals with a variety…

Prospective study on the reciprocal relationship between intimate partner violence and depression among women in Korea.

PubMed

Kim, Jinseok; Lee, Joohee

2013-12-01

This study aimed to examine the bi-directional relationship between intimate partner violence (IPV) and depression using prospective data. Data from the Korean Welfare Panel Study (KOWEPS) were used to test whether IPV was associated with an increased overall level of depression and with the rate of change over time in depressive symptoms and whether this model of change in depressive symptoms was associated with subsequent incidences of IPV. This study utilized data from 3153 married women who participated in the KOWEPS from 2006 through 2009. The KOWEPS is a panel study of a nationally representative sample of Korean households. The women's responses to multiple questions adopted from the Conflict Tactics Scale (CTS) were used to create a dichotomous IPV variable at Wave1 and Wave4. The CESD-11 was used to measure the women's level of depression. We utilized a latent growth model (LGM) of depression using IPV at Wave1 as a predictor and IPV at Wave4 as an outcome predicted by the model parameters of the LGM of depression. We found that after controlling for the effects of age, education, social support and income, IPV at Wave1 was positively associated with overall depression levels and negatively associated with the growth rate of depression. Further, IPV at Wave4 was associated with the intercept and the slope of the depression LGM and with IPV at Wave1. The overall model fit the data well. This study indicated that experiencing IPV influences a woman's level of depression in terms of its overall level and rate of change, which, in turn, influences the victim's likelihood of experiencing subsequent IPV. Copyright © 2013 Elsevier Ltd. All rights reserved.

Experimental vibroacoustic testing of plane panels using synthesized random pressure fields.

PubMed

Robin, Olivier; Berry, Alain; Moreau, Stéphane

2014-06-01

The experimental reproduction of random pressure fields on a plane panel and corresponding induced vibrations is studied. An open-loop reproduction strategy is proposed that uses the synthetic array concept, for which a small array element is moved to create a large array by post-processing. Three possible approaches are suggested to define the complex amplitudes to be imposed to the reproduction sources distributed on a virtual plane facing the panel to be tested. Using a single acoustic monopole, a scanning laser vibrometer and a baffled simply supported aluminum panel, experimental vibroacoustic indicators such as the Transmission Loss for Diffuse Acoustic Field, high-speed subsonic and supersonic Turbulent Boundary Layer excitations are obtained. Comparisons with simulation results obtained using a commercial software show that the Transmission Loss estimation is possible under both excitations. Moreover and as a complement to frequency domain indicators, the vibroacoustic behavior of the panel can be studied in the wave number domain.

Job satisfaction among hospital nurses: a longitudinal study.

PubMed Central

Weisman, C S; Alexander, C S; Chase, G A

1980-01-01

Data from a two-wave panel study of staff nurses in two hospitals are used to assess the relative importance of several types of independent variables as determinants of job satisfaction. Both organizational and nonorganizational determinants are examined, with the formed including both perceptual and structural measures. Job satisfaction is measured in two ways using both Overall and Multi-Facet indicators. The independent variables were measured five months before the dependent variables were measured in order to attenuate contamination problems. Findings indicate that perceptions of job and nursing unit attributes, particularly autonomy and task delegation, predict satisfaction most strongly. In addition, a nurse's own characteristics are found to be more important than either structural attributes of nursing units or job characteristics in predicting job satisfaction. PMID:7461970

Sound-proof Sandwich Panel Design via Metamaterial Concept

NASA Astrophysics Data System (ADS)

Sui, Ni

Sandwich panels consisting of hollow core cells and two face-sheets bonded on both sides have been widely used as lightweight and strong structures in practical engineering applications, but with poor acoustic performance especially at low frequency regime. Basic sound-proof methods for the sandwich panel design are spontaneously categorized as sound insulation and sound absorption. Motivated by metamaterial concept, this dissertation presents two sandwich panel designs without sacrificing weight or size penalty: A lightweight yet sound-proof honeycomb acoustic metamateiral can be used as core material for honeycomb sandwich panels to block sound and break the mass law to realize minimum sound transmission; the other sandwich panel design is based on coupled Helmholtz resonators and can achieve perfect sound absorption without sound reflection. Based on the honeycomb sandwich panel, the mechanical properties of the honeycomb core structure were studied first. By incorporating a thin membrane on top of each honeycomb core, the traditional honeycomb core turns into honeycomb acoustic metamaterial. The basic theory for such kind of membrane-type acoustic metamaterial is demonstrated by a lumped model with infinite periodic oscillator system, and the negative dynamic effective mass density for clamped membrane is analyzed under the membrane resonance condition. Evanescent wave mode caused by negative dynamic effective mass density and impedance methods are utilized to interpret the physical phenomenon of honeycomb acoustic metamaterials at resonance. The honeycomb metamaterials can extraordinarily improve low-frequency sound transmission loss below the first resonant frequency of the membrane. The property of the membrane, the tension of the membrane and the numbers of attached membranes can impact the sound transmission loss, which are observed by numerical simulations and validated by experiments. The sandwich panel which incorporates the honeycomb metamateiral as the core material maintains the mechanical property and yields a sound transmission loss that is consistently greater than 50 dB at low frequencies. Furthermore, the absorption property of the proposed honeycomb sandwich panel was experimentally studied. The honeycomb sandwich panel shows an excellent sound absorbing performance at high frequencies by using reinforced glass fiber without adding too much mass. The effect of the panel size and the stiffness of the grid-like frame effect of the honeycomb sandwich structures on sound transmission are discussed lastly. For the second sound-proof sandwich panel design, each unit cell of the sandwich panel is replaced by a Helmholtz resonator by perforating a small hole on the top face sheet. A perfect sound absorber sandwich panel with coupled Helmholtz resonators is proposed by two types: single identical Helmholtz resonator in each unit cell and dual Helmholtz resonators with different orifices, arranged in each cell arranged periodically. The soundproof sandwich panel is modelled as a panel embedded in rigid panel and assumed as a semiinfinite space with hard boundary condition. The net/mutual impedance model is first proposed and derived by solving Kirchhoff-Helmholtz integral by using the Green's function. The thermal-viscous energy dissipation at the thermal boundary layer dominates the total energy consumed. Two types of perfect sound absorber sandwich panel are designed in the last part. Two theoretical methods: the average energy and the equivalent surface impedance method are used to predict sound absorption performance. The geometry for perfect sound absorber sandwich panel at a target frequency can be obtained when the all the Helmholtz resonators are at resonance and the surface impedance of the sandwich panel matches the air impedance. The bandwidth for the identical sandwich panel mainly depends on the neck radius. The absorptive property of the dual Helmholtz resonators type of sandwich panel is studied by investigating the coupling effects between HRs. The theoretical results can be verified by numerical simulations through finite element method. The absorption bandwidth can be tuned by incorporating more HRs in each unit cell. Both sound-proof sandwich panel designs possess extraordinary acoustic performance for noise reduction at low frequency range with sub-wavelength structures. The sound absorber panel design can also achieve broadband sound attenuation at low frequencies.

The Uses and Effects of Video Viewing among Swedish Adolescents. An Ethnographic Study of Adolescent Video Users. Media Panel Report No. 31.

ERIC Educational Resources Information Center

Roe, Keith; Salomonsson, Karin

This report is one in a series dealing with Swedish adolescents' uses of video based upon the Media Panel research program, a three-wave, longitudinal research program on video use conducted at the Department of Sociology, the University of Lund, and the Department for Information Techniques, the University College of Vaxjo, Sweden. Data were…

Dynamics of Adult Participation in Part-Time Education and Training: Results from the British Household Panel Survey

ERIC Educational Resources Information Center

Macleod, Flora; Lambe, Paul

2008-01-01

In this paper we analyse the dynamics of adult participation in part-time education and training throughout the 90s and into the 2000s using data from 14 waves (1992-2005) of the British Household Panel Survey (BHPS). We study the volume (stocks) of participation and non-participation and the gross flows between states. This analysis provides a…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gibson-Grant, Amy

Postwave tracking study for the Energy Efficiency Adult Campaign This study serves as measure of key metrics among the campaign’s target audience, homeowners age 25+. Key measures include: Awareness of messages relating to the broad issue; Recognition of the PSAs; Relevant attitudes, including interest, ease of taking energy efficient steps, and likelihood to act; Relevant knowledge, including knowledge of light bulb alternatives and energy efficient options; and Relevant behaviors, including specific energy-saving behaviors mentioned within the PSAs. Wave 1: May 27 – June 7, 2011 Wave 2: May 29 – June 8, 2012 Wave 3: May 29 – June 19,more » 2014 General market sample of adults 25+ who own their homes W1 sample: n = 704; W2: n=701; W3: n=806 Online Survey Panel Methodology Study was fielded by Lightspeed Research among their survey panel. Sample is US Census representative of US homeowners by race/ethnicity, income, age, region, and family status. At least 30% of respondents were required to have not updated major appliances in their home in the past 5 years (dishwasher, stove, refrigerator, washer, or dryer).« less

Future of the Korea national parks: a preliminary Delphi study of key experts

Treesearch

Byung-kyu Lee; Wilbur F. LaPage

2002-01-01

A preliminary Delphi survey of a panel of key experts who are very knowledgeable of Korean national parks was conducted between February and March in 2001. Park professionals, environmental NGO directors, interested citizens, and retirees identified issues facing the Korean park system (Wave1). Findings from wave I of the survey provided the baseline for a series of...

Association between interpersonal trust, reciprocity, and suicidal behaviors: A longitudinal cohort study in South Korea.

PubMed

Kim, Ja Young; Yoon, Jaehong; Kim, Myoung-Hee; Kim, Seung-Sup

2017-06-01

While a growing body of evidence suggest that social capital including interpersonal trust and reciprocity might be associated with mental health outcomes, few studies have explored the relationship with suicidal behaviors. This research examined the prospective association between interpersonal trust and reciprocity and suicidal behaviors using the Korea Welfare Panel Study, a nationally representative longitudinal cohort dataset in South Korea. Interpersonal trust and reciprocity were assessed at the 7th wave of the survey (2012), and each measure was classified into two categories (low vs. high). Experience of suicidal ideation, planning, and attempt was assessed between the 8th (2013) and 10th wave (2015) of the surveys. After adjusting for confounders including lifetime experience of suicidal behaviors at the 7th wave of the survey (2012) as well as socio-demographic information, the low interpersonal trust group was more likely to experience suicidal ideation (OR: 1.30, 95% CI: 1.11-1.53) compared to the high interpersonal trust group whereas no statistically significant association was observed in the reciprocity analysis. Copyright © 2017 Elsevier Inc. All rights reserved.

Effects of substrata and environmental conditions on ecological succession on historic shipwrecks

NASA Astrophysics Data System (ADS)

González-Duarte, Manuel M.; Fernández-Montblanc, Tomás; Bethencourt, Manuel; Izquierdo, Alfredo

2018-01-01

An understanding of the interactions between biological, chemical and physical dynamics is especially important for the adequate conservation of the Underwater Cultural Heritage. However, while physical and chemical processes are relatively well-investigated, the biological communities associated with these habitats are poorly studied. We compared the sessile community developed on panels of different materials placed on two historical shipwrecks, the Fougueux and the Bucentaure, from the Battle of Trafalgar (October 1805). Six materials used at the construction of vessels at the 18th and 19th centuries were selected: copper, brass, cast iron, carbon steel, pine and oak. The sessile community developed on the panels was studied two and 15 months after their immersion at the water to determine the effects of materials and environmental conditions (sediments, waves, hydrodynamic conditions, temperature and salinity) on ecological succession and the possible implications at the conservation of historical shipwrecks. On the Fougueux, the environmental conditions more strongly influenced the biological succession than the material type, with pioneer colonisers dominating the communities in both sampling periods. On the Bucentaure, exposed to more stable environmental conditions, the sessile community showed differences between sampling periods and among materials at the end of the experiment. Under these more stable environmental conditions, the material type showed a higher influence on the sessile community. Species that produce calcareous concretions developed on metallic panels, but were absent on wood panels, where the shipworm Teredo navalis was more abundant. The relationship between environmental conditions, sessile organisms and material type can influence the conservation status of the archaeological sites.

Working hours and depressive symptoms over 7 years: evidence from a Korean panel study.

PubMed

Ahn, Seoyeon

2018-04-01

This study aims to examine how working hours influence depressive symptoms and the association between working hours and depressive symptoms differently across genders. The sample consists of salaried workers aged 25-64 years who participated in two consecutive waves of the seven-wave Korean Welfare Panel Study (2007-2013) (n = 6813 individuals, 27,986 observations) which is a survey of a nationally representative sample of the South Korean population. I apply logit regression and fixed-effects logit regression to examine the causal relation between (intra-)individual changes of working hours and depressive symptoms over a 7-year period. Results from logit model and fixed-effects logit model show that less than 30 h of work per week and more than 60 h of work per week are associated with significantly higher levels of depressive symptoms. Sex-stratified analyses reveal that women who worked over 60 h per week were at increased risk of showing depressive symptoms compared with women who worked 30-40 h per week. No significant increase in depressive symptoms was seen in men who worked more than 60 h per week. However, men working less than 30 h per week are more likely to report higher levels of depressive symptoms. These results suggest that work arrangement affects the mental health of men and women differently.

Making structured metals transparent for ultrabroadband electromagnetic waves and acoustic waves

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fan, Ren-Hao; Peng, Ru-Wen; Huang, Xian-Rong

2015-07-01

In this review, we present our recent work on making structured metals transparent for broadband electromagnetic waves and acoustic waves via excitation of surface waves. First, we theoretically show that one-dimensional metallic gratings can become transparent and completely antireflective for extremely broadband electromagnetic waves by relying on surface plasmons or spoof surface plasmons. Second, we experimentally demonstrate that metallic gratings with narrow slits are highly transparent for broadband terahertz waves at oblique incidence and high transmission efficiency is insensitive to the metal thickness. Further, we significantly develop oblique metal gratings transparent for broadband electromagnetic waves (including optical waves and terahertzmore » ones) under normal incidence. In the third, we find the principles of broadband transparency for structured metals can be extended from one-dimensional metallic gratings to two-dimensional cases. Moreover, similar phenomena are found in sonic artificially metallic structures, which present the transparency for broadband acoustic waves. These investigations provide guidelines to develop many novel materials and devices, such as transparent conducting panels, antireflective solar cells, and other broadband metamaterials and stealth technologies.« less

Firm-Related Training Tracks: A Random Effects Ordered Probit Model

ERIC Educational Resources Information Center

Groot, Wim; van den Brink, Henriette Maassen

2003-01-01

A random effects ordered response model of training is estimated to analyze the existence of training tracks and time varying coefficients in training frequency. Two waves of a Dutch panel survey of workers are used covering the period 1992-1996. The amount of training received by workers increased during the period 1994-1996 compared to…

Millimetre Wave Propagation Over the Sea

DTIC Science & Technology

1990-10-29

Rennes-Armees B-1110 Brussels France Belgium (Not a Distribution Centre) 12. Distribution Statement: Approved lor public release. Distribution of this...millimetre waves above the sea have taken place on the French Atlantic coast near the town of Lorient (Brittany). The length of the propagation path was 9.7...ORIGINAL: FRENCH TECHNICAL REPORT 29th October 1990 AC/243(Panel 3)TR/3 DEFENCE RESEARCH GROUP PANEL 3 ON PHYSICS AND ELECTRONICS Technical Report on

Sound transmission through stiffened double-panel structures lined with elastic porous materials

NASA Astrophysics Data System (ADS)

Mathur, Gopal P.; Tran, Boi N.; Bolton, J. S.; Shiau, Nae-Ming

This paper presents transmission loss prediction models for a periodically stiffened panel and stiffened double-panel structures using the periodic structure theory. The inter-panel cavity in the double-panels structures can be modeled as being separated by an airspace or filled with an elastic porous layer in various configurations. The acoustic behavior of elastic porous layer is described by a theory capable of accounting fully for multi-dimensional wave propagation in such materials. The predicted transmission loss of a single stiffened panel is compared with the measured data.

A swept wing panel in a low speed flexible walled test section

NASA Technical Reports Server (NTRS)

Goodyer, M. J.

1987-01-01

The testing of two-dimensional airfoil sections in adaptive wall tunnels is relatively widespread and has become routine at all speeds up to transonic. In contrast, the experience with the three-dimensional testing of swept panels in adaptive wall test sections is very limited, except for some activity in the 1940's at NPL, London. The current interest in testing swept wing panels led to the work covered by this report, which describes the design of an adaptive-wall swept-wing test section for a low speed wind tunnel and gives test results for a wing panel swept at 40 deg. The test section has rigid flat sidewalls supporting the panel, and features flexible top and bottom wall with ribs swept at the same angle as the wing. When streamlined, the walls form waves swept at the same angle as the wing. The C sub L (-) curve for the swept wing, determined from its pressure distributions taken with the walls streamlined, compare well with reference data which was taken on the same model, unswept, in a test section deep enough to avoid wall interference.

75 FR 80790 - Proposed Information Collection; Comment Request; Survey of Income and Program Participation...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-23

..., which is a household-based survey designed as a continuous series of national panels. New panels are... DEPARTMENT OF COMMERCE U.S. Census Bureau Proposed Information Collection; Comment Request; Survey... at 4-month intervals or ``waves'' over the life of the panel. The survey is molded around a central...

75 FR 21593 - Proposed Information Collection; Comment Request; Survey of Income and Program Participation...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-26

..., which is a household-based survey designed as a continuous series of national panels. New panels are... DEPARTMENT OF COMMERCE U.S. Census Bureau Proposed Information Collection; Comment Request; Survey... interviewed at 4-month intervals or ``waves'' over the life of the panel. The survey is molded around a...

Parametric study of guided ultrasonic wave propagation in carbon-fiber composite plates

NASA Astrophysics Data System (ADS)

Ibrahim, N. A.; Kamarudin, M. A.; Jurimi, M. H. F. M.; Murat, B. I. S.

2018-03-01

The aim of this work is to study the guided ultrasonic wave (GUW) behaviour in composite plates using 3D Finite Element Analysis (FEA). Two types of composite models are chosen: plates with and without damage. The damage is modelled as a circular-shaped delamination inside the plate, representing one kind of low-velocity impact damage. Parameters such as excitation frequency, monitoring directivity, plate thickness, delamination size and shape were used to investigate the influence of these parameters on the GUW propagation and scattering behaviour. The models were constructed and coded in Matlab platform, while the simulations were performed in ABAQUS Explicit. From the results, the received signals have shown a strong dependency on the parameters. Significant scattering from the models with delamination were also observed, which indicates the possibility of using GUW for rapid non-destructive monitoring of composite panels and structures.

Effects of external and gap mean flows on sound transmission through a double-wall sandwich panel

NASA Astrophysics Data System (ADS)

Liu, Yu; Sebastian, Alexis

2015-05-01

This paper studies analytically the effects of an external mean flow and an internal gap mean flow on sound transmission through a double-wall sandwich panel lined with poroelastic materials. Biot's theory is employed to describe wave propagation in poroelastic materials, and the transfer matrix method with three types of boundary conditions is applied to solve the system simultaneously. The random incidence transmission loss in a diffuse field is calculated numerically, and the limiting angle of incidence due to total internal reflection is discussed in detail. The numerical predictions suggest that the sound insulation performance of such a double-wall panel is enhanced considerably by both external and gap mean flows particularly in the high-frequency range. Similar effects on transmission loss are observed for the two mean flows. It is shown that the effect of the gap mean flow depends on flow velocity, flow direction, gap depth and fluid properties and also that the fluid properties within the gap appear to influence the transmission loss more effectively than the gap flow. Despite the implementation difficulty in practice, an internal gap flow provides more design space for tuning the sound insulation performance of a double-wall sandwich panel and has great potential for active/passive noise control.

What You Can--and Can't--Do with Three-Wave Panel Data

ERIC Educational Resources Information Center

Vaisey, Stephen; Miles, Andrew

2017-01-01

The recent change in the general social survey (GSS) to a rotating panel design is a landmark development for social scientists. Sociological methodologists have argued that fixed-effects (FE) models are generally the best starting point for analyzing panel data because they allow analysts to control for unobserved time-constant heterogeneity. We…

Experimental and Theoretical Analysis of Sound Absorption Properties of Finely Perforated Wooden Panels.

PubMed

Song, Boqi; Peng, Limin; Fu, Feng; Liu, Meihong; Zhang, Houjiang

2016-11-22

Perforated wooden panels are typically utilized as a resonant sound absorbing material in indoor noise control. In this paper, the absorption properties of wooden panels perforated with tiny holes of 1-3 mm diameter were studied both experimentally and theoretically. The Maa-MPP (micro perforated panels) model and the Maa-Flex model were applied to predict the absorption regularities of finely perforated wooden panels. A relative impedance comparison and full-factorial experiments were carried out to verify the feasibility of the theoretical models. The results showed that the Maa-Flex model obtained good agreement with measured results. Control experiments and measurements of dynamic mechanical properties were carried out to investigate the influence of the wood characteristics. In this study, absorption properties were enhanced by sound-induced vibration. The relationship between the dynamic mechanical properties and the panel mass-spring vibration absorption was revealed. While the absorption effects of wood porous structure were not found, they were demonstrated theoretically by using acoustic wave propagation in a simplified circular pipe with a suddenly changed cross-section model. This work provides experimental and theoretical guidance for perforation parameter design.

Featured Image: Mixing Chemicals in Stars

NASA Astrophysics Data System (ADS)

Kohler, Susanna

2017-10-01

How do stars mix chemicals in their interiors, leading to the abundances we measure at their surfaces? Two scientists from the Planetary Science Institute in Arizona, Tamara Rogers (Newcastle University, UK) and Jim McElwaine (Durham University, UK), have investigated the role that internal gravity waves have in chemical mixing in stellar interiors. Internal gravity waves not to be confused with the currently topical gravitational waves are waves that oscillate within a fluid that has a density gradient. Rogers and McElwaine used simulations to explore how these waves can cause particles in a stars interior to move around, gradually mixing the different chemical elements. Snapshots from four different times in their simulation can be seen below, with the white dots marking tracer particles and the colors indicating vorticity. You can see how the particles move in response to wave motion after the first panel. For more information, check out the paper below!CitationT. M. Rogers and J. N. McElwaine 2017 ApJL 848 L1. doi:10.3847/2041-8213/aa8d13

Authoritarian Parenting and Asian Adolescent School Performance: Insights from the US and Taiwan

PubMed Central

Pong, Suet-ling; Johnston, Jamie; Chen, Vivien

2014-01-01

Our study re-examines the relationship between parenting and school performance among Asian students. We use two sources of data: wave I of the Adolescent Health Longitudinal Survey (Add Health), and waves I and II of the Taiwan Educational Panel Survey (TEPS). Analysis using Add Health reveals that the Asian-American/European-American difference in the parenting–school performance relationship is due largely to differential sample sizes. When we select a random sample of European-American students comparable to the sample size of Asian-American students, authoritarian parenting also shows no effect for European-American students. Furthermore, analysis of TEPS shows that authoritarian parenting is negatively associated with children's school achievement, while authoritative parenting is positively associated. This result for Taiwanese Chinese students is similar to previous results for European-American students in the US. PMID:24850978

Authoritarian Parenting and Asian Adolescent School Performance: Insights from the US and Taiwan.

PubMed

Pong, Suet-Ling; Johnston, Jamie; Chen, Vivien

2010-01-01

Our study re-examines the relationship between parenting and school performance among Asian students. We use two sources of data: wave I of the Adolescent Health Longitudinal Survey (Add Health), and waves I and II of the Taiwan Educational Panel Survey (TEPS). Analysis using Add Health reveals that the Asian-American/European-American difference in the parenting-school performance relationship is due largely to differential sample sizes. When we select a random sample of European-American students comparable to the sample size of Asian-American students, authoritarian parenting also shows no effect for European-American students. Furthermore, analysis of TEPS shows that authoritarian parenting is negatively associated with children's school achievement, while authoritative parenting is positively associated. This result for Taiwanese Chinese students is similar to previous results for European-American students in the US.

Images of smokers and willingness to smoke among African American pre-adolescents: an application of the prototype/willingness model of adolescent health risk behavior to smoking initiation.

PubMed

Gerrard, Meg; Gibbons, Frederick X; Stock, Michelle L; Lune, Linda S Vande; Cleveland, Michael J

2005-06-01

This study used the prototype/willingness model of adolescent health risk behavior to examine factors related to onset of smoking. Two waves of data were collected from a panel of 742 African American children (mean age=10.5 at Wave 1) and their primary caregivers. Measures included cognitions outlined by the prototype model as well as self-reports of smoking by the parent and child. Structural equation modeling revealed a pattern consistent with expectations generated by the prototype model. The relation between contextual, familial, and dispositional factors-including neighborhood risk, parental smoking, and children's academic orientation-and the initiation of smoking at Wave 2, two years later, was mediated by the children's cognitions. Primary among these cognitions were the children's images of smokers and children's willingness to smoke. Smoking cognitions mediate the impact of important distal factors (such as context, family environment, and disposition) on the onset of smoking in children. Perhaps more important, it is possible to predict onset of smoking in African American children as young as age 10 by assessing the cognitive factors suggested by the prototype model.

Jovian Dark Spot

NASA Technical Reports Server (NTRS)

1998-01-01

A recently discovered black spot in Jupiter's clouds is darker than any feature ever before observed on the giant planet. The spot may be the result of a downward spiraling wind that blows away high clouds and reveals deeper, very dark cloud layers. These three panels depict the same area of Jupiter's atmosphere. A map of Jovian temperatures near 250 millibar pressure (top) panel is derived from the photopolarimeter-radiometer instrument on NASA's Galileo Jupiter orbiter. This map is compared with maps derived from images of the same area in visible light (middle panel)and thermal radiation sensitive to cloud-top temperatures (bottom panel).

The single downward-pointing arrow in the top panel indicates the location of a warm area that corresponds to the position of a so-called 'black spot'(shown in the middle panel), a feature that is about a year old. Features this dark are rare on Jupiter. The bottom panel, sensitive to temperatures at Jupiter's cloud tops, shows this feature as a bright object, meaning that upper-level cold clouds are missing - allowing us to see deeper into Jupiter's warmer interior. The dark visible appearance of the feature than most likely represents the color of very deep clouds. The warm temperatures and cloud-free conditions imply that this feature is a region where dry upper-atmospheric gas is being forced to converge, is warmed up and then forced to descend, clearing out clouds. It is the opposite of wet, upwelling gas in areas such as Jupiter's Great Red Spot or white ovals. On the other hand, it is unlike the dry and relatively cloudless feature into which the Galileo probe descended in 1995, because that region had the same temperatures as its surroundings and did not appear nearly as dark as this new spot.

The temperatures sampled by the photopolarimeter radiometer are near the top of Jupiter's troposphere, where wind motions control the atmosphere. The top row of arrows shows the location of temperature waves in a warm region of the atmosphere. These types of waves have never been seen before. What is interesting about these waves is both that they are 'channeled' within the warm band at the top of the panel, and that they appear to have no counterpart in the visible cloud structure. Thermal waves have already been seen in Jupiter that are independent of the cloud structure, but those waves were much larger in size. This is the first time Jupiter's temperatures have been mapped at a spatial resolution better than 2,000 kilometers (1,243 miles), allowing these waves to be detected.

These maps include an area on Jupiter between approximately the equator and 40 degrees south latitude, covering about 60 degrees of longitude. They were taken in late September during the spacecraft's 17th orbit.

The Jet Propulsion Laboratory, Pasadena, CA manages the Galileo mission for NASA's Office of Space Science, Washington, DC.

Effects of the truth FinishIt brand on tobacco outcomes.

PubMed

Evans, W Douglas; Rath, Jessica M; Hair, Elizabeth C; Snider, Jeremy Williams; Pitzer, Lindsay; Greenberg, Marisa; Xiao, Haijun; Cantrell, Jennifer; Vallone, Donna

2018-03-01

Since 2000, the truth campaign has grown as a social marketing brand. Back then, truth employed branding to compete directly with the tobacco industry. In 2014, the launch of truth FinishIt reflected changes in the brand's strategy, the tobacco control environment, and youth/young adult behavior. Building on a previous validation study, the current study examined brand equity in truth FinishIt , as measured by validated multi-dimensional scales, and tobacco related attitudes, beliefs, and behavior based on two waves of the Truth Longitudinal Cohort data from 2015 and 2016. A fixed effects logistic regression was used to estimate the change in brand equity between panel survey waves 3 and 4 on past 30-day smoking among ever and current smokers. Additional models determined the effects of brand equity predicting tobacco attitudes/use at follow up among the full sample. All analyses controlled for demographic factors. A one-point increase in the brand equity scale between the two waves was associated with a 66% greater chance of not smoking among ever smokers (OR 1.66, CI 1.11-2.48, p  < 0.05) and an 80% greater chance of not smoking among current smokers (OR 1.80, CI 1.05-3.10, p  < 0.05). Higher overall truth brand equity at wave 3 predicted less smoking at wave 4 and more positive anti-tobacco attitudes. Being male, younger, and non-white predicted some of the tobacco related attitudes. Future research should examine long-term effects of brand equity on tobacco use and how tobacco control can optimize the use of branding in campaigns.

High interobserver variability in the assessment of epsilon waves: Implications for diagnosis of arrhythmogenic right ventricular cardiomyopathy/dysplasia.

PubMed

Platonov, Pyotr G; Calkins, Hugh; Hauer, Richard N; Corrado, Domenico; Svendsen, Jesper H; Wichter, Thomas; Biernacka, Elżbieta Katarzyna; Saguner, Ardan M; Te Riele, Anneline S J M; Zareba, Wojciech

2016-01-01

Revision of the Task Force diagnostic criteria for arrhythmogenic right ventricular cardiomyopathy/dysplasia (ARVC/D) has increased their sensitivity for the diagnosis of early and familial forms of the disease. The epsilon wave is a major diagnostic criterion in the context of ARVC/D, which, however, remains not quantifiable and therefore may leave room for substantial subjective interpretation. The purpose of this study was to assess interobserver agreement in epsilon wave definition and epsilon wave importance for ARVC/D diagnosis. Electrocardiographic (ECG) tracings depicting leads V1, V2, and V3 collected from individuals evaluated for ARVC/D (n = 30) were given to panel members who were asked to respond to the question whether ECG patterns meet epsilon wave definition outlined by the Task Force diagnostic criteria. The prevalence and importance of epsilon waves for ARVC/D diagnosis were assessed in a pooled data set of patients with definite ARVC/D from European and American registries (n = 815). The number of ECG patterns identified as epsilon waves varied from 5 to 18 per reviewer (median 13 per reviewer). A unanimous agreement was reached for only 10 cases (33%), 2 of which qualified as epsilon waves and 8 as non-epsilon waves by all panel members. From a pooled data set, 106 patients reportedly had epsilon waves (13%). In 105 of 106 patients with epsilon waves (99%), exclusion of epsilon waves from the diagnostic score would not affect the "definite" diagnostic category. Interobserver variability in the assessment of epsilon waves is high; however, the impact of epsilon waves on ARVC/D diagnosis is negligibly low. The results urge to exercise caution in the assessment of epsilon waves, especially in patients who would not otherwise meet diagnostic criteria. Copyright © 2016 Heart Rhythm Society. Published by Elsevier Inc. All rights reserved.

High Resolution Millimeter Wave Detection of Vertical Cracks in the Space Shuttle External Tank Spray-On-Foam Insulation (SOFI)

NASA Technical Reports Server (NTRS)

Kharkovsky, S.; Zoughi, R.; Hepburn, F.

2006-01-01

Space Shuttle Columbia s catastrophic failure, the separation of a piece of spray-on-foam insulation (SOFI) from the external tank (ET) in the Space Shuttle Discovery s flight in 2005 and crack detected in its ET foam prior to its successful launch in 2006 emphasize the need for effective nondestructive methods for inspecting the shuttle ET SOFI. Millimeter wave nondestructive testing methods have been considered as potential and effective inspection tools for evaluating the integrity of the SOFI. This paper presents recent results of an investigation for the purpose of detecting vertical cracks in SOFI panels using a focused millimeter wave (150 GHz) reflectometer. The presented images of the SOFI panels show the capability of this reflectometer for detecting tight vertical cracks (also as a function of crack opening dimension) in exposed SOFI panels and while covered by a piece of SOFI ramp simulating a more realistic and challenging situation.

Devices based on surface plasmon interference filters

NASA Technical Reports Server (NTRS)

Wang, Yu (Inventor)

2001-01-01

Devices based on surface plasmon filters having at least one metal-dielectric interface to support surface plasmon waves. A multi-layer-coupled surface plasmon notch filter is provided to have more than two symmetric metal-dielectric interfaces coupled with one another to produce a transmission spectral window with desired spectral profile and bandwidth. Such notch filters can form various color filtering devices for color flat panel displays.

Making structured metals transparency for broadband and wide-incidence-angle electromagnetic waves

NASA Astrophysics Data System (ADS)

Fan, Renhao; Peng, Ruwen; Huang, Xianrong; Wang, Mu

2014-03-01

Very recently, we have demonstrated that one-dimensional metallic gratings can become transparent and completely antireflective for extremely broadband electromagnetic (EM) waves under oblique incidence. However, the oblique-incidence geometry, is inconvenient for the technological applications. To overcome this drawback, here we instead use oblique metal gratings with optimal tilt angles to achieve normal-incidence broadband transparence for EM waves. Further we use two-dimensional periodic metallic cuboids to achieve broadband and broad-angle high transmission and antireflection. By introducing such metallic cuboids arrays into silicon solar cells, we find that high performance of light trapping in the cells can be obtained with a significant enhancement of the ultimate quantum efficiency. The structured metals, which achieve broadband and broad-angle high transmission for EM waves, may have many other potential applications, such as transparent conducting panels, white-beam polarizers, and stealth objects.

Aerial secure display by use of polarization-processing display with retarder film and retro-reflector

NASA Astrophysics Data System (ADS)

Ito, Shusei; Uchida, Keitaro; Mizushina, Haruki; Suyama, Shiro; Yamamoto, Hirotsugu

2017-02-01

Security is one of the big issues in automated teller machine (ATM). In ATM, two types of security have to be maintained. One is to secure displayed information. The other is to secure screen contamination. This paper gives a solution for these two security issues. In order to secure information against peeping at the screen, we utilize visual cryptography for displayed information and limit the viewing zone. Furthermore, an aerial information screen with aerial imaging by retro-reflection, named AIRR enables users to avoid direct touch on the information screen. The purpose of this paper is to propose an aerial secure display technique that ensures security of displayed information as well as security against contamination problem on screen touch. We have developed a polarization-processing display that is composed of a backlight, a polarizer, a background LCD panel, a gap, a half-wave retarder, and a foreground LCD panel. Polarization angle is rotated with the LCD panels. We have constructed a polarization encryption code set. Size of displayed images are designed to limit the viewing position. Furthermore, this polarization-processing display has been introduced into our aerial imaging optics, which employs a reflective polarizer and a retro-reflector covered with a quarter-wave retarder. Polarization-modulated light forms the real image over the reflective polarizer. We have successfully formed aerial information screen that shows the secret image with a limited viewing position. This is the first realization of aerial secure display by use of polarization-processing display with retarder-film and retro-reflector.

Making structured metals transparent for ultrabroadband electromagnetic waves and acoustic waves

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fan, Ren-Hao; Peng, Ru-Wen, E-mail: rwpeng@nju.edu.cn; Huang, Xian-Rong

2015-07-15

In this review, we present our recent work on making structured metals transparent for broadband electromagnetic waves and acoustic waves via excitation of surface waves. First, we theoretically show that one-dimensional metallic gratings can become transparent and completely antireflective for extremely broadband electromagnetic waves by relying on surface plasmons or spoof surface plasmons. Second, we experimentally demonstrate that metallic gratings with narrow slits are highly transparent for broadband terahertz waves at oblique incidence and high transmission efficiency is insensitive to the metal thickness. Further, we significantly develop oblique metal gratings transparent for broadband electromagnetic waves (including optical waves and terahertzmore » ones) under normal incidence. In the third, we find the principles of broadband transparency for structured metals can be extended from one-dimensional metallic gratings to two-dimensional cases. Moreover, similar phenomena are found in sonic artificially metallic structures, which present the transparency for broadband acoustic waves. These investigations provide guidelines to develop many novel materials and devices, such as transparent conducting panels, antireflective solar cells, and other broadband metamaterials and stealth technologies. - Highlights: • Making structured metals transparent for ultrabroadband electromagnetic waves. • Non-resonant excitation of surface plasmons or spoof surface plasmons. • Sonic artificially metallic structures transparent for broadband acoustic waves.« less

Development of Polyimide Foam for Aircraft Sidewall Applications

NASA Technical Reports Server (NTRS)

Silcox, Richard; Cano, Roberto J.; Howerton, Brian M.; Bolton, J. Stuart; Kim, Nicholas N.

2013-01-01

In this paper, the use of polyimide foam as a lining in double panel applications is considered. It is being investigated here as a replacement for aircraft grade glass fiber and has a number of attractive functional attributes, not the least of which is its high fire resistance. The test configuration studied here consisted of two 1mm (0.04 in.) thick, flat aluminum panels separated by 12.7 cm (5.0 in.) with a 7.6 cm (3.0 in.) thick layer of foam centered in that space. Random incidence transmission loss measurements were conducted on this buildup, and conventional poro-elastic models were used to predict the performance of the lining material. Results from two densities of foam are considered. The Biot parameters of the foam were determined by a combination of direct measurement (for density, flow resistivity and Young s modulus) and inverse characterization procedures (for porosity, tortuosity, viscous and thermal characteristic length, Poisson s ratio and loss factor). The inverse characterization procedure involved matching normal incidence standing wave tube measurements of absorption coefficient and transmission loss of the isolated foam with finite element predictions. When the foam parameters determined in this way were used to predict the performance of the complete double panel system, reasonable agreement was obtained between the measured transmission loss and predictions made using a commercial statistical energy analysis code.

The reciprocal relationship between work characteristics and employee burnout and engagement: a longitudinal study of firefighters.

PubMed

Ângelo, R P; Chambel, M J

2015-04-01

The paradigm of this study is positive occupational psychology, with the job demands-resources model as the research model and the Conservation of Resources theory as the general stress theory. The research design analyses the job demands-resources model's dynamic nature with normal and reversed causation effects between work characteristics and psychological well-being among Portuguese firefighters. In addition, we analyse a positive (engagement) dimension and a negative (burnout) dimension in the firefighters' well-being, because previously, studies have merely focused on the strain or stress of these professionals. The research questionnaire was distributed to a sample of 651 firefighters, and a two-wave full panel design was used. Cross-lagged panel analyses indicated that the causal direction of the relationship between organizational demands and burnout is reciprocal. Also, we found that the reciprocal model, including cross-lagged reciprocal relationships between organizational demands/supervisory support and burnout/engagement, respectively, is what fits the data best. Practical implications to develop organizational change programmes and suggestions for future research regarding the promotion of occupational health are discussed. Copyright © 2013 John Wiley & Sons, Ltd.

High-Resolution Millimeter Wave Detection of Vertical Cracks in the Space Shuttle External Tank (ET) Spray-on-Foam Insulation (SOFI)

NASA Technical Reports Server (NTRS)

Kharkovsky, S.; Zoughi, R.; Hepburn, Frank L.

2006-01-01

Space Shuttle Columbia's catastrophic failure has been attributed to a piece of spray-on-foam insulation (SOFI) that was dislodged from the external tank (ET) and struck the leading edge of the left wing. A piece of SOFI was also dislodged in the Space Shuttle Discovery's flight in 2005 and recently a crack was detected in its ET foam prior to its successful launch. Millimeter wave nondestructive testing methods have been considered as potential effective inspection tools for evaluating the integrity of the SOFI. Recently, in a specific investigation into the potential of these methods for detecting vertical cracks in SOFI was explored using a focused millimeter wave reflectometer at 150 GHz. The results showed the capability of these methods for detecting tight vertical cracks (also as a function of crack opening dimension) in exposed SOFI panels and while covered by a piece of SOFI ramp simulating a more realistic and challenging situation. Some crack-like anomalies were also detected in a blind SOFI panel. This paper presents the background for these techniques as well as representative images of the vertical crack in the SOFI panel, crack-like anomalies in the blind panel and a discussion of the practical attributes of these inspection methods.

Investigating the relationship between self-rated health and social capital in South Africa: a multilevel panel data analysis.

PubMed

Lau, Yan Kwan; Ataguba, John E

2015-03-19

The relationship between social capital and self-rated health has been documented in many developed compared to developing countries. Because social capital and health play important roles in development, it may be valuable to study their relationship in the context of a developing country with poorer health status. Further, the role of social capital research for health policy has not received much attention. This paper therefore examines the relationship between social capital and health in South Africa, a country with the history of colonialism and apartheid that has contributed to the social disintegration and destruction of social capital. This study uses data from the National Income Dynamics Study (NIDS), the first nationally representative panel study in South Africa. Two waves of the NIDS were used in this paper--Wave 1 (2008) and Wave 2 (2010). Self-rated health, social capital (individual- and contextual-level), and other covariates related to the social determinants of health (SDH) were obtained from the NIDS. Individual-level social capital included group participation, personalised trust and generalised trust while contextual-level or neighbourhood-level social capital was obtained by aggregating from the individual-level and household-level social capital variables to the neighbourhood. Mixed effects models were fitted to predict self-rated health in Wave 2, using lagged covariates (from Wave 1). Individual personalised trust, individual community service group membership and neighbourhood personalised trust were beneficial to self-rated health. Reciprocity, associational activity and other types of group memberships were not found to be significantly associated with self-rated health in South Africa. Results indicate that both individual- and contextual-level social capital are associated with self-rated health. Policy makers may want to consider policies that impact socioeconomic conditions as well as social capital. Some of these policies are linked to the SDH. We contend that the significant social capital including community service membership can be encouraged through policy in a way that is in line with the values of the people. This is likely to impact on health and quality of life generally and lead to a reduction in the burden of disease in South Africa considering the historic context of the country.

Experimental and Theoretical Analysis of Sound Absorption Properties of Finely Perforated Wooden Panels

PubMed Central

Song, Boqi; Peng, Limin; Fu, Feng; Liu, Meihong; Zhang, Houjiang

2016-01-01

Perforated wooden panels are typically utilized as a resonant sound absorbing material in indoor noise control. In this paper, the absorption properties of wooden panels perforated with tiny holes of 1–3 mm diameter were studied both experimentally and theoretically. The Maa-MPP (micro perforated panels) model and the Maa-Flex model were applied to predict the absorption regularities of finely perforated wooden panels. A relative impedance comparison and full-factorial experiments were carried out to verify the feasibility of the theoretical models. The results showed that the Maa-Flex model obtained good agreement with measured results. Control experiments and measurements of dynamic mechanical properties were carried out to investigate the influence of the wood characteristics. In this study, absorption properties were enhanced by sound-induced vibration. The relationship between the dynamic mechanical properties and the panel mass-spring vibration absorption was revealed. While the absorption effects of wood porous structure were not found, they were demonstrated theoretically by using acoustic wave propagation in a simplified circular pipe with a suddenly changed cross-section model. This work provides experimental and theoretical guidance for perforation parameter design. PMID:28774063

Numerical and Analytical Model of an Electrodynamic Dust Shield for Solar Panels on Mars

NASA Technical Reports Server (NTRS)

Calle, C. I.; Linell, B.; Chen, A.; Meyer, J.; Clements, S.; Mazumder, M. K.

2006-01-01

Masuda and collaborators at the University of Tokyo developed a method to confine and transport particles called the electric curtain in which a series of parallel electrodes connected to an AC source generates a traveling wave that acts as a contactless conveyor. The curtain electrodes can be excited by a single-phase or a multi-phase AC voltage. A multi-phase curtain produces a non-uniform traveling wave that provides controlled transport of those particles [1-6]. Multi-phase electric curtains from two to six phases have been developed and studied by several research groups [7-9]. We have developed an Electrodynamic Dust Shield prototype using threephase AC voltage electrodes to remove dust from surfaces. The purpose of the modeling work presented here is to research and to better understand the physics governing the electrodynamic shield, as well as to advance and to support the experimental dust shield research.

Response of Composite Fuselage Sandwich Side Panels Subjected to Internal Pressure and Axial Tension

NASA Technical Reports Server (NTRS)

Rouse, Marshall; Ambur, Damodar R.; Dopker, Bernard; Shah, Bharat

1998-01-01

The results from an experimental and analytical study of two composite sandwich fuselage side panels for a transport aircraft are presented. Each panel has two window cutouts and three frames and utilizes a distinctly different structural concept. These panels have been evaluated with internal pressure loads that generate biaxial tension loading conditions. Design limit load and design ultimate load tests have been performed on both panels. One of the sandwich panels was tested with the middle frame removed to demonstrate the suitability of this two-frame design for supporting the prescribed biaxial loading conditions with twice the initial frame spacing of 20 inches. A damage tolerance study was conducted on the two-frame panel by cutting a notch in the panel that originates at the edge of a cutout and extends in the panel hoop direction through the window-belt area. This panel with a notch was tested in a combined-load condition to demonstrate the structural damage tolerance at the design limit load condition. Both the sandwich panel designs successfully satisfied all desired load requirements in the experimental part of the study, and experimental results from the two-frame panel with and without damage are fully explained by the analytical results. The results of this study suggest that there is potential for using sandwich structural concepts with greater than the usual 20-in. wide frame spacing to further reduce aircraft fuselage structural weight.

Determinants of Wealth Fluctuation: Changes in Hard-To-Measure Economic Variables in a Panel Study

PubMed Central

Pfeffer, Fabian T.; Griffin, Jamie

2017-01-01

Measuring fluctuation in families’ economic conditions is the raison d’être of household panel studies. Accordingly, a particularly challenging critique is that extreme fluctuation in measured economic characteristics might indicate compounding measurement error rather than actual changes in families’ economic wellbeing. In this article, we address this claim by moving beyond the assumption that particularly large fluctuation in economic conditions might be too large to be realistic. Instead, we examine predictors of large fluctuation, capturing sources related to actual socio-economic changes as well as potential sources of measurement error. Using the Panel Study of Income Dynamics, we study between-wave changes in a dimension of economic wellbeing that is especially hard to measure, namely, net worth as an indicator of total family wealth. Our results demonstrate that even very large between-wave changes in net worth can be attributed to actual socio-economic and demographic processes. We do, however, also identify a potential source of measurement error that contributes to large wealth fluctuation, namely, the treatment of incomplete information, presenting a pervasive challenge for any longitudinal survey that includes questions on economic assets. Our results point to ways for improving wealth variables both in the data collection process (e.g., by measuring active savings) and in data processing (e.g., by improving imputation algorithms). PMID:28316752

Unsteady viscous effects in the flow over an oscillating surface. [mathematical model

NASA Technical Reports Server (NTRS)

Lerner, J. I.

1972-01-01

A theoretical model for the interaction of a turbulent boundary layer with an oscillating wavy surface over which a fluid is flowing is developed, with an application to wind-driven water waves and to panel flutter in low supersonic flow. A systematic methodology is developed to obtain the surface pressure distribution by considering separately the effects on the perturbed flow of a mean shear velocity profile, viscous stresses, the turbulent Reynolds stresses, compressibility, and three-dimensionality. The inviscid theory is applied to the wind-water wave problem by specializing to traveling-wave disturbances, and the pressure magnitude and phase shift as a function of the wave phase speed are computed for a logarithmic mean velocity profile and compared with inviscid theory and experiment. The results agree with experimental evidence for the stabilization of the panel motion due to the influence of the unsteady boundary layer.

Large scale implementation of guided wave based broken rail monitoring

NASA Astrophysics Data System (ADS)

Burger, Francois A.; Loveday, Philip W.; Long, Craig S.

2015-03-01

A guided wave ultrasound system has been developed over the past 17 years to detect breaks in continuously welded rail track. Installation of the version 4 system on an 840 km long heavy duty freight line was conducted between January 2013 and June 2014. The system operates in pitch - catch mode with alternate transmit and receive transducers spaced approximately 1km apart. If the acoustic signal is not received at the receive station an alarm is triggered to indicate a break in the rail between the transmit station and the receive station. The system is permanently installed, powered by solar panels and issues broken rail alarms using the GSM network where available, and digital radio technology in other areas. A total of 931 stations were installed and the entire length of rail is interrogated every fifteen minutes. The system operates reliably although some problems involving unreliable GSM communication and theft of solar panels have been experienced. In the first two months of operation four broken rails were detected and train operation was halted temporarily for repairs.

Parametric study of guided waves dispersion curves for composite plates

NASA Astrophysics Data System (ADS)

Predoi, Mihai Valentin; Petre, Cristian Cǎtǎlin; Kettani, Mounsif Ech Cherif El; Leduc, Damien

2018-02-01

Nondestructive testing of composite panels benefit from the relatively long range propagation of guided waves in sandwich structures. The guided waves are sensitive to delamination, air bubbles inclusions and cracks and can thus bring information about hidden defects in the composite panel. The preliminary data in all such inspections is represented by the dispersion curves, representing the dependency of the phase/group velocity on the frequency for the propagating modes. In fact, all modes are more or less attenuated, so it is even more important to compute the dispersion curves, which provide also the modal attenuation as function of frequency. Another important aspect is the sensitivity of the dispersion curves on each of the elastic constant of the composite, which are orthotropic in most cases. All these aspects are investigated in the present work, based on our specially developed finite element numerical model implemented in Comsol, which has several advantages over existing methods. The dispersion curves and modal displacements are computed for an example of composite plate. Comparison with literature data validates the accuracy of our results.

Data Resource Profile: The Survey of Health, Ageing and Retirement in Europe (SHARE)

PubMed Central

Börsch-Supan, Axel; Brandt, Martina; Hunkler, Christian; Kneip, Thorsten; Korbmacher, Julie; Malter, Frederic; Schaan, Barbara; Stuck, Stephanie; Zuber, Sabrina

2013-01-01

SHARE is a unique panel database of micro data on health, socio-economic status and social and family networks covering most of the European Union and Israel. To date, SHARE has collected three panel waves (2004, 2006, 2010) of current living circumstances and retrospective life histories (2008, SHARELIFE); 6 additional waves are planned until 2024. The more than 150 000 interviews give a broad picture of life after the age of 50 years, measuring physical and mental health, economic and non-economic activities, income and wealth, transfers of time and money within and outside the family as well as life satisfaction and well-being. The data are available to the scientific community free of charge at www.share-project.org after registration. SHARE is harmonized with the US Health and Retirement Study (HRS) and the English Longitudinal Study of Ageing (ELSA) and has become a role model for several ageing surveys worldwide. SHARE’s scientific power is based on its panel design that grasps the dynamic character of the ageing process, its multidisciplinary approach that delivers the full picture of individual and societal ageing, and its cross-nationally ex-ante harmonized design that permits international comparisons of health, economic and social outcomes in Europe and the USA. PMID:23778574

A research program to reduce interior noise in general aviation airplanes. Influence of depressurization and damping material on the noise reduction characteristics of flat and curved stiffened panels

NASA Technical Reports Server (NTRS)

Navaneethan, R.; Streeter, B.; Koontz, S.; Roskam, J.

1981-01-01

Some 20 x 20 aluminum panels were studied in a frequency range from 20 Hz to 5000 Hz. The noise sources used were a swept sine wave generator and a random noise generator. The effect of noise source was found to be negligible. Increasing the pressure differential across the panel gave better noise reduction below the fundamental resonance frequency due to an increase in stiffness. The largest increase occurred in the first 1 psi pressure differential. The curved, stiffened panel exhibited similar behavior, but with a lower increase of low frequency noise reduction. Depressurization on these panels resulted in decreased noise reduction at higher frequencies. The effect of damping tapes on the overall noise reduction values of the test specimens was small away from the resonance frequency. In the mass-law region, a slight and proportional improvement in noise reduction was observed by adding damping material. Adding sound absorbtion material to a panel with damping material beneficially increased noise reduction at high frequencies.

Two-component wind fields over ocean waves using atmospheric lidar and motion estimation algorithms

NASA Astrophysics Data System (ADS)

Mayor, S. D.

2016-02-01

Numerical models, such as large eddy simulations, are capable of providing stunning visualizations of the air-sea interface. One reason for this is the inherent spatial nature of such models. As compute power grows, models are able to provide higher resolution visualizations over larger domains revealing intricate details of the interactions of ocean waves and the airflow over them. Spatial observations on the other hand, which are necessary to validate the simulations, appear to lag behind models. The rough ocean environment of the real world is an additional challenge. One method of providing spatial observations of fluid flow is that of particle image velocimetry (PIV). PIV has been successfully applied to many problems in engineering and the geosciences. This presentation will show recent research results that demonstate that a PIV-style approach using pulsed-fiber atmospheric elastic backscatter lidar hardware and wavelet-based optical flow motion estimation software can reveal two-component wind fields over rough ocean surfaces. Namely, a recently-developed compact lidar was deployed for 10 days in March of 2015 in the Eureka, California area. It scanned over the ocean. Imagery reveal that breaking ocean waves provide copius amounts of particulate matter for the lidar to detect and for the motion estimation algorithms to retrieve wind vectors from. The image below shows two examples of results from the experiment. The left panel shows the elastic backscatter intensity (copper shades) under a field of vectors that was retrieved by the wavelet-based optical flow algorithm from two scans that took about 15 s each to acquire. The vectors, that reveal offshore flow toward the NW, were decimated for clarity. The bright aerosol features along the right edge of the sector scan were caused by ocean waves breaking on the beach. The right panel is the result of scanning over the ocean on a day when wave amplitudes ranged from 8-12 feet and whitecaps offshore beyond the surf zone appeared to be rare and fleeting. Nonetheless, faint coherent aerosol structures are observable in the backscatter field as long, streaky, wind-parallel filaments and a wind field was retrieved. During the 10-day deployment, the seas were not as rough as expected. A current goal is to find collaborators and return to map airflow in rougher conditions.

Sound transmission through double panel constructions lined with elastic porous materials

NASA Astrophysics Data System (ADS)

Bolton, J. S.; Green, E. R.

1986-07-01

Attention is given to a theory governing one-dimensional wave motion in elastic porous materials which is capable of reproducing experimental transmission measurements for unfaced polyurethane foam layers. Calculations of the transmission loss of fuselage-like foam-lined double panels are presented and it is shown that the foam/panel boundary conditions have a large effect on the panel performance; a hybrid arrangement whereby the foam is bonded directly to one panel and separated from the other by a thin air gap appears to be the most advantageous under practical circumstances. With this configuratiom, the mass-air-mass resonance is minimized and increased low-frequency performance is offered.

Evaluation of barely visible indentation damage (BVID) in CF/EP sandwich composites using guided wave signals

NASA Astrophysics Data System (ADS)

Mustapha, Samir; Ye, Lin; Dong, Xingjian; Alamdari, Mehrisadat Makki

2016-08-01

Barely visible indentation damage after quasi-static indentation in sandwich CF/EP composites was assessed using ultrasonic guided wave signals. Finite element analyses were conducted to investigate the interaction between guided waves and damage, further to assist in the selection process of the Lamb wave sensitive modes for debonding identification. Composite sandwich beams and panels structures were investigated. Using the beam structure, a damage index was defined based on the change in the peak magnitude of the captured wave signals before and after the indentation, and the damage index was correlated with the residual deformation (defined as the depth of the dent), that was further correlated with the amount of crushing within the core. Both A0 and S0 Lamb wave modes showed high sensitivity to the presence of barely visible indentation damage with residual deformation of 0.2 mm. Furthermore, barely visible indentation damage was assessed in composite sandwich panels after indenting to 3 and 5 mm, and the damage index was defined, based on (a) the peak magnitude of the wave signals before and after indentation or (b) the mismatch between the original and reconstructed wave signals based on a time-reversal algorithm, and was subsequently applied to locate the position of indentation.

SPF/DB titanium concepts for structural efficiency foi HC

NASA Technical Reports Server (NTRS)

Wilson, V. E.

1982-01-01

Illustrations for a presentation on superplastic forming/diffusion bonding titanium design concepts are presented. Sandwich skin panels with hat section, semicircular corrugation, sine wave, and truss cores are shown. The fabrication of wing panels is illustrated, and applications to the design of advanced variable sweep bombers summarized.

Estimation of True Change with Three-Wave Data.

ERIC Educational Resources Information Center

Gupta, J. K.; And Others

1988-01-01

A multiple regression model for estimating true change of an individual by using information in addition to pretest-posttest data is described. Longitudinal panel or multi-wave data taken between the pretest and the posttest constitute the additional information. (TJH)

Inequality in Workplace Conditions and Health Outcomes

PubMed Central

ISHIDA, Hiroshi

2013-01-01

This paper examines the relationship between the inequality in workplace conditions and health-related outcomes in Japan. It analyzes the effect of changes in the work conditions and work arrangements on the subjective health, activity restriction, and depression symptoms, using the Japanese Life Course Panel Survey (JLPS). The 2007 JLPS consists of nationally representative sample of the youth (20 to 34 yr old) and the middle-aged (35 to 40 yr old). The original respondents were followed up in 2008, and 2,719 respondents for the youth panel and 1,246 for the middle-aged panel returned the questionnaires. The first major conclusion is that there are substantial changes in health conditions between the two waves even though the distributions of health-related outcomes are very similar at two time points. The second major conclusion is that the effects of work conditions depend on different health-related outcomes. Self-reported health and depression symptoms are affected by a variety of job-related factors. The atmosphere of helping each other and the control over the pace of work are two important factors which affect both depression and self-reported health. All these findings suggest that the workplace conditions and job characteristics have profound influence on the workers’ health. PMID:23955651

Evaluation of a Composite Sandwich Fuselage Side Panel with Damage and Subjected to Internal Pressure

NASA Technical Reports Server (NTRS)

Rouse, Marshall; Ambur, Damodar R.; Bodine, Jerry; Dopker, Bernhard

1997-01-01

The results from an experimental and analytical study of a composite sandwich fuselage side panel for a transport aircraft are presented. The panel has two window cutouts and three frames, and has been evaluated with internal pressure loads that generate biaxial tension loading conditions. Design limit load and design ultimate load tests have been performed on the graphite-epoxy sandwich panel with the middle frame removed to demonstrate the suitability of this two-frame design for supporting the prescribed biaxial loading conditions with twice the initial frame spacing of 20 inches. The two-frame panel was damaged by cutting a notch that originates at the edge of a cutout and extends in the panel hoop direction through the window-belt area. This panel with a notch was tested in a combined-load condition to demonstrate the structural damage tolerance at the design limit load condition. The two panel configurations successfully satisfied all design load requirements in the experimental part of the study, and the three-frame and two-frame panel responses are fully explained by the analysis results. The results of this study suggest that there is potential for using sandwich structural concepts with greater than the usual 20-in.-wide frame spacing to further reduce aircraft fuselage structural weight.

Laser vibrometry for guided wave propagation phenomena visualisation and damage detection

NASA Astrophysics Data System (ADS)

Malinowski, Pawel; Wandowski, Tomasz; Kudela, Pawel; Ostachowicz, Wieslaw

2010-05-01

This paper presents research on the damage localization method. The method is based on guided wave propagation phenomena. The investigation was focused on application of this method to monitor the condition of structural elements such as aluminium or composite panels. These elements are commonly used in aerospace industry and it is crucial to provide a methodology to determine their condition, in order to prevent from unexpected and dangerous collapse of a structure. Propagating waves interact with cracks, notches, rivets, thickness changes, stiffeners and other discontinuities present in structural elements. It means that registering these waves one can obtain information about the structure condition—whether it is damaged or not. Furthermore these methods can be applied not only to aerospace structures but also to wind turbine blades and pipelines. In reported investigation piezoelectric transducer was used to excite guided waves in considered panel. Measurement of the wave field was realized using laser scanning vibrometer that registered the velocity responses at a defined points belonging to a defined mesh. Mesh spacing was investigated in order to ensure fine wave propagation visualisation. Firstly, wave propagation in pristine specimen was investigated. Secondly, artificial damage was introduced to the specimen. Finally, wave interaction with damage was visualised and conclusions regarding potentials of application of laser vibrometer for damage detection were drawn. All the processing was made with the developed MATLAB procedures.

Solidarity and ambivalence: comparing two perspectives on intergenerational relations using longitudinal panel data.

PubMed

Hogerbrugge, Martijn J A; Komter, Aafke E

2012-05-01

Research on family relations has extensively used the intergenerational solidarity model proposed by Bengtson and colleagues. Recently, the relevance of this model for explaining changes in family relations has been questioned, and the concept of intergenerational ambivalence has been proposed as a relevant addition to the model, supposedly acting as a catalyst, and thus serving as an explanation for changes in family relations. This study tests both the viability of the intergenerational solidarity model and the hypothesized effect of ambivalence employing longitudinal data. We use data from 2 waves of the Netherlands' Kinship Panel Study on parent-adult child relationships to estimate latent variable structural equation models. Affection, association, and support between family members are core, mutually reinforcing dimensions of solidarity. The hypothesis that ambivalence is a catalyst for change in family relations was not confirmed. Adding conflict separately revealed that it only affects the core solidarity dimensions but is itself, like normative and structural solidarity, not influenced by them. The relevance of the concept of intergenerational ambivalence for studying changes in family relations can be questioned. The viability of the intergenerational solidarity model is, however, confirmed. The concept of intergenerational ambivalence might be further explored in qualitative studies on family change.

Estimating regression to the mean and true effects of an intervention in a four-wave panel study.

PubMed

Gmel, Gerhard; Wicki, Matthias; Rehm, Jürgen; Heeb, Jean-Luc

2008-01-01

First, to analyse whether a taxation-related decrease in spirit prices had a similar effect on spirit consumption for low-, medium- and high-level drinkers. Secondly, as the relationship between baseline values and post-intervention changes is confounded with regression to the mean (RTM) effects, to apply different approaches for estimating the RTM effect and true change. Consumption of spirits and total alcohol consumption were analysed in a four-wave panel study (one pre-intervention and three post-intervention measurements) of 889 alcohol consumers sampled from the general population of Switzerland. Two correlational methods, one method quantitatively estimating the RTM effect and one growth curve approach based on hierarchical linear models (HLM), were used to estimate RTM effects among low-, medium- and high-level drinkers. Adjusted for RTM effects, high-level drinkers increased consumption more than lighter drinkers in the short term, but this was not a persisting effect. Changes in taxation affected mainly light and moderate drinkers in the long term. All methods concurred that RTM effects were present to a considerable degree, and methods quantifying the RTM effect or adjusting for it yielded similar estimates. Intervention studies have to consider RTM effects both in the study design and in the evaluation methods. Observed changes can be adjusted for RTM effects and true change can be estimated. The recommended method, particularly if the aim is to estimate change not only for the sample as a whole, but for groups of drinkers with different baseline consumption levels, is growth curve modelling. If reliability of measurement instruments cannot be increased, the incorporation of more than one pre-intervention measurement point may be a valuable adjustment of the study design.

Is the relationship between parental abuse and mobile phone dependency (MPD) contingent across neighborhood characteristics? A multilevel analysis of Korean Children and Youth Panel Survey.

PubMed

Kim, Harris Hyun-Soo; Chun, JongSerl

2018-01-01

Research indicates that mobile phone dependency (MPD) is associated with various behavioral and internalizing problems. While a significant amount of findings points to its negative outcomes, there is a dearth of evidence concerning the determinants of MPD. This study focuses on this critical, yet understudied, subject by analyzing the associations between abusive parenting style, neighborhood characteristics, and MPD among youths in South Korea, a country with one of the highest mobile broadband penetration rates in the world. Based on the secondary analysis of two waves of Korean Children and Youth Panel Survey (KCYPS), a government-funded multiyear study, we investigate individual- and contextual-level factors underlying MPD. Findings show that, net of a host of time-lagged controls (including baseline dependency from the previous year), abusive parenting style significantly increases adolescent MPD. After adjusting for individual level characteristics, however, no contextual-level effect is found, i.e., residing in a neighborhood with a relatively higher proportion of parental abuse is not related to greater MPD. Finally, two cross-level interaction effects are observed. First, the association between parental abuse and MPD is weaker in a neighborhood context with better educated inhabitants (more college graduates). Second, it is reinforced in demographically "aged" communities with more elderly residents.

Becoming Poor: The Experiences of Elders.

ERIC Educational Resources Information Center

McLaughlin, Diane K.; Jensen, Leif

1995-01-01

Data from the Panel Study of Income Dynamics (1988 wave) reveal that nonpoor individuals aged 55 and older living in nonmetropolitan areas were much more likely to become poor than their metropolitan counterparts. This difference persisted when controlling for race, education, marital status, age, change in work effort, becoming widowed, and types…

The Heterogeneous Effects of Income Changes on Happiness

ERIC Educational Resources Information Center

Becchetti, Leonardo; Corrado, Luisa; Rossetti, Fiammetta

2011-01-01

We investigate the relationship between money and happiness across the waves of the British Household Panel Study by using a latent class approach which accounts for slope heterogeneity. Our findings reveal the presence of a vast majority of "Easterlin-type" individuals with positive but very weak relationship between changes in income…

Does Globalization Affect Human Well-Being?

ERIC Educational Resources Information Center

Tsai, Ming-Chang

2007-01-01

The prevailing theorizing of globalization's influence of human well-being suggests to assess both the favorable and unfavorable outcomes. This study formulates a dialectical model, adopts a comprehensive globalization measure and uses a three-wave panel data during 1980-2000 to empirically test direct and indirect effects of global flows' human…

The Influence of Stressor Exposure and Psychosocial Resources on the Age-Anger Relationship.

PubMed

Brown, Robyn Lewis

2016-12-01

This study examined the processes linking age, stressor exposure, psychosocial coping resources, and two dimensions of anger proneness (i.e., experienced anger and expressed anger). Longitudinal change regression analysis of data from a two-wave community panel study including a sample of people aged 18 to 93 ( N = 1,473) is performed. Age is significantly associated with declines in both experienced anger and expressed anger over the 3-year study period. These associations are substantially mediated by the lower levels of chronic stressors and discrimination-related stressors experienced among older adults. In contrast, self-esteem amplifies the association between age and expressed anger. These findings clarify the circumstances in which age matters most for changes over time in the experience and expression of anger. They highlight how certain forms of stressor exposure and psychosocial resources are linked with anger proneness and in ways that vary by age.

F-16XL Wing Pressure Distributions and Shock Fence Results from Mach 1.4 to Mach 2.0

NASA Technical Reports Server (NTRS)

Landers, Stephen F.; Saltzman, John A.; Bjarke, Lisa J.

1997-01-01

Chordwise pressure distributions were obtained in-flight on the upper and lower surfaces of the F-16XL ship 2 aircraft wing between Mach 1.4 and Mach 2.0. This experiment was conducted to determine the location of shock waves which could compromise or invalidate a follow-on test of a large chord laminar flow control suction panel. On the upper surface, the canopy closure shock crossed an area which would be covered by a proposed laminar flow suction panel. At the laminar flow experiment design Mach number of 1.9, 91 percent of the suction panel area would be forward of the shock. At Mach 1.4, that value reduces to 65 percent. On the lower surface, a shock from the inlet diverter would impinge on the proposed suction panel leading edge. A chordwise plate mounted vertically to deflect shock waves, called a shock fence, was installed between the inlet diverter and the leading edge. This plate was effective in reducing the pressure gradients caused by the inlet shock system.

Participation in the National School Lunch Program: Importance of School-Level and Neighborhood Contextual Factors

ERIC Educational Resources Information Center

Mirtcheva, Donka M.; Powell, Lisa M.

2009-01-01

Background: This study examined the effect of stigma (proxied by school-level peer participation), neighborhood food environment, and demographic characteristics on participation in the U.S. Department of Agriculture National School Lunch Program (NSLP). Methods: The 1997 and 2003 waves of the Child Development Supplement to the Panel Study of…

Educational Achievement of Immigrant Adolescents in Spain: Do Gender and Region of Origin Matter?

ERIC Educational Resources Information Center

Vaquera, Elizabeth; Kao, Grace

2012-01-01

This study explores the educational achievement of immigrant youth in Spain employing data from 3 waves of the Longitudinal Study of Families and Childhood (Panel de Families i Infancia), a representative sample of children in Catalonia first interviewed at ages 13-16 in 2006 (N = 2,710). Results suggest consistent disadvantage in achievement…

Application of scanning laser Doppler vibrometry for delamination detection in composite structures

NASA Astrophysics Data System (ADS)

Kudela, Pawel; Wandowski, Tomasz; Malinowski, Pawel; Ostachowicz, Wieslaw

2017-12-01

In this paper application of scanning laser Doppler vibrometry for delamination detection in composite structures was presented. Delamination detection was based on a guided wave propagation method. In this papers results from numerical and experimental research were presented. In the case of numerical research, the Spectral Element Method (SEM) was utilized, in which a mesh was composed of 3D spectral elements. SEM model included also a piezoelectric transducer. In the experimental research guided waves were excited using the piezoelectric transducer whereas the sensing process was conducted using scanning laser Doppler vibrometer (SLDV). Analysis of guided wave propagation and its interaction with delamination was based on a full wavefield approach. Attention was focused on interactions of guided waves with delamination manifested by A0 mode reflection, A0 mode entrapment, and S0/A0 mode conversion. Delamination was simulated by a teflon insert located between plies of composite material. Results of interaction with symmetrically and nonsymmetrical placed delamination (in respect to the composite sample thickness) were presented. Moreover, the authors investigated different size of delaminations. Damage detection was based on a new signal processing algorithm proposed by the authors. In this approach the weighted RMS was utilized selectively. It means that the summation in RMS formula was performed only for a specially selected time instances. Results for simple composite panels, panel with honeycomb core, and real stiffened composite panel from the aircraft were presented.

Non-Destructive Inspection of Impact Damage in Composite Aircraft Panels by Ultrasonic Guided Waves and Statistical Processing.

PubMed

Capriotti, Margherita; Kim, Hyungsuk E; Scalea, Francesco Lanza di; Kim, Hyonny

2017-06-04

This paper discusses a non-destructive evaluation (NDE) technique for the detection of damage in composite aircraft structures following high energy wide area blunt impact (HEWABI) from ground service equipment (GSE), such as heavy cargo loaders and other heavy equipment. The test structures typically include skin, co-cured stringers, and C-frames that are bolt-connected onto the skin with shear ties. The inspection exploits the waveguide geometry of these structures by utilizing ultrasonic guided waves and a line scan approach. Both a contact prototype and a non-contact prototype were developed and tested on realistic test panels subjected to impact in the laboratory. The results are presented in terms of receiver operating characteristic curves that show excellent probability of detection with low false alarm rates for defects located in the panel skin and stringers.

Non-Destructive Inspection of Impact Damage in Composite Aircraft Panels by Ultrasonic Guided Waves and Statistical Processing

PubMed Central

Capriotti, Margherita; Kim, Hyungsuk E.; Lanza di Scalea, Francesco; Kim, Hyonny

2017-01-01

This paper discusses a non-destructive evaluation (NDE) technique for the detection of damage in composite aircraft structures following high energy wide area blunt impact (HEWABI) from ground service equipment (GSE), such as heavy cargo loaders and other heavy equipment. The test structures typically include skin, co-cured stringers, and C-frames that are bolt-connected onto the skin with shear ties. The inspection exploits the waveguide geometry of these structures by utilizing ultrasonic guided waves and a line scan approach. Both a contact prototype and a non-contact prototype were developed and tested on realistic test panels subjected to impact in the laboratory. The results are presented in terms of receiver operating characteristic curves that show excellent probability of detection with low false alarm rates for defects located in the panel skin and stringers. PMID:28772976

Photoelectric panel with equatorial mounting of drive

NASA Astrophysics Data System (ADS)

Kukhta, M. S.; Krauinsh, P. Y.; Krauinsh, D. P.; Sokolov, A. P.; Mainy, S. B.

2018-03-01

The relevance of the work is determined by the need to create effective models for sunny energy. The article considers a photoelectric panel equipped with a system for tracking the sun. Efficiency of the system is provided by equatorial mounting, which compensates for the rotation of the Earth by rotating the sunny panel in the plane of the celestial equator. The specificity of climatic and geographical conditions of Tomsk is estimated. The dynamics of power variations of photoelectric panels with equatorial mounting during seasonal fluctuations in Tomsk is calculated. A mobile photovoltaic panel with equatorial mounting of the drive has been developed. The methods of design strategy for placing photovoltaic panels in the architectural environment of the city are presented. Key words: sunny energy, photovoltaics, equatorial mounting, mechatronic model, wave reducer, electric drive.

Future scenarios of Korea national parks: Delphi survey of Korean parks of experts

Treesearch

Byung-kyu Lee; Wilbur F. LaPage

2003-01-01

A three-wave Delphi survey of a panel of 40 key experts very knowledgeable of Korean national parks was conducted between February 2001 and March in 2002. In Wave 1, park professionals, environmental Nongovernmental Organizations (NGOs) managers, and a retiree identified the issues the Korean park system is facing. Findings from Wave 1 of the survey were analyzed and...

The Dynamics and Correlates of Religious Service Attendance in Adolescence

PubMed Central

Hardie, Jessica Halliday; Pearce, Lisa D.; Denton, Melinda Lundquist

2013-01-01

This study examines changes in religious service attendance over time for a contemporary cohort of adolescents moving from middle to late adolescence. We use two waves of a nationally representative panel survey of youth from the National Study of Youth and Religion (NSYR) to examine the dynamics of religious involvement during adolescence. We then follow with an analysis of how demographic characteristics, family background, and life course transitions relate to changes in religious service attendance during adolescence. Our findings suggest that, on average, adolescent religious service attendance declines over time, related to major life course transitions such as becoming employed, leaving home, and initiating sexual activity. Parents’ affiliation and attendance, on the other hand, are protective factors against decreasing attendance. PMID:26900186

High frequency guided wave propagation in monocrystalline silicon wafers

NASA Astrophysics Data System (ADS)

Pizzolato, Marco; Masserey, Bernard; Robyr, Jean-Luc; Fromme, Paul

2017-04-01

Monocrystalline silicon wafers are widely used in the photovoltaic industry for solar panels with high conversion efficiency. The cutting process can introduce micro-cracks in the thin wafers and lead to varying thickness. High frequency guided ultrasonic waves are considered for the structural monitoring of the wafers. The anisotropy of the monocrystalline silicon leads to variations of the wave characteristics, depending on the propagation direction relative to the crystal orientation. Full three-dimensional Finite Element simulations of the guided wave propagation were conducted to visualize and quantify these effects for a line source. The phase velocity (slowness) and skew angle of the two fundamental Lamb wave modes (first anti-symmetric mode A0 and first symmetric mode S0) for varying propagation directions relative to the crystal orientation were measured experimentally. Selective mode excitation was achieved using a contact piezoelectric transducer with a custom-made wedge and holder to achieve a controlled contact pressure. The out-of-plane component of the guided wave propagation was measured using a noncontact laser interferometer. Good agreement was found with the simulation results and theoretical predictions based on nominal material properties of the silicon wafer.

Accreditation's Alchemy Hour: Riding the Wave of Innovation

ERIC Educational Resources Information Center

Gaston, Paul L.

2014-01-01

This article was adapted from Paul L. Gaston's address to the 2014 annual meeting of the "Association of American Colleges and Universities." The panel session talk "Accreditation: Riding the Wave of Innovation--or Going Under?" addressed issues surrounding the many proposals for demolishing and rebuilding higher education…

Light redirecting system using sine-wave based panels for dense urban areas

NASA Astrophysics Data System (ADS)

Mohamed, Mohamed W. N.; Mashaly, Islam A.; Mohamed, Osama N.; El-Henawy, Sally I.; Galal, Ola; Taha, Iman; Nassar, Khaled; Safwat, Amr M. E.

2014-09-01

Cities and towns around the world are becoming more condensed due to the shrinking amount of buildable areas, which significantly reduces the amount of light that occupants have access to. This lack of natural lighting results in health, safety and quality of life degradation. This paper presents a new technique of transmitting sunlight downward into narrow alleys and streets, by using a daylighting guiding acrylic panel that is capable of changing the direction and distribution of the incident light. The core of the proposed daylight guidance system is made up of light transmission panels with high quality. The corrugations have sine wave shaped cross-section so that the panel functions as an optical diffuser perpendicular to the direction of sunlight propagation. The day lighting system consists of the corrugated panels and a lattice frame, which supports the panel. The proposed system is to be mounted on the building roof facing the sun so as to redirect the incident sunlight downward into the narrow alleys or streets. Since building sizes and orientations are different the frame is arranged such that substantially deep light penetration and high luminance level can be achieved. Simulation results show that the proposed panel improves the illuminance values by more than 200% and 400% in autumn and winter, respectively, provides fan-out angle that exceeds 80° for certain solar altitudes and the transmitted power percentage varies from 40% to 90% as the solar altitude varies from 10° to 80°. Experimental results are in a good agreement with the simulations.

Characteristics of the Lower Atmosphere Influencing Radio Wave Propagation: Conference Proceedings Symposium of the Electromagnetic Wave Propagation Panel (33rd) Held at Spatind, Norway on 4-7 October 1983

DTIC Science & Technology

1984-02-01

selecting the most appropriate model is constrained by the problem faced by the system designer and/or system user, funding available, ability to collect...before new systems are designed . Propagation studies are somewhat cyclic in nature. When sufficient knowledge of a particular phenomenon for the...phenomena are continuing to be better understood in terms of absorption, attenuation, and forecasting. This leads to better system design . o Propagation

The Influence of Video Technology in Adolescence. Media Panel Report No. 27.

ERIC Educational Resources Information Center

Roe, Keith

This report provides a detailed analysis of the video use and preferences of Swedish adolescents based on data drawn from the Media Panel project, a three-wave, longitudinal research program on video use conducted at the Department of Sociology, The University of Lund, and the Department for Information Techniques, the University College of Vaxjo,…

Combined effects of education level and perceived social class on self-rated health and life satisfaction: Results of Korean labor and income panel study wave 8-wave 15.

PubMed

Kim, Jae-Hyun; Yoo, Ki-Bong; Park, Eun-Cheol; Lee, Sang Gyu; Kim, Tae Hyun

2015-11-02

To examine the combined effects of education level and perceived social class on self-rated health and life satisfaction in South Korea. We used data drawn from the 8 to 15th wave of the Korean Labor and Income Panel Study (KLIPS). Using wave 8 at baseline, data included 11,175 individuals. We performed a longitudinal analysis at baseline estimating the prevalence of self-rated health and life satisfaction among individuals by education level (high, middle, and low education level) and perceived social class (high, middle, and low social class). For self-rated health, odds ratio (OR) of individuals with low education and low perceived social class was 0.604 times lower (95% CI: 0.555-0.656) and the OR of individuals with low education and middle perceived social class was 0.853 time lower (95% CI: 0.790-0.922) when compared to individuals with high education and high perceived social class. For life satisfaction, OR of individuals with low education and low perceived social class was 0.068 times lower (95% CI: 0.063-0.074) and the OR of individuals with middle education and middle perceived social class was 0.235 time lower (95% CI: 0.221-0.251) compared to individuals with high education and high perceived social class. This study shows that the combined effects of education level and perceived social class associated with self-rated health and life satisfaction. Our study suggests increasing education level and perceived social class. Additionally, it will be important to develop multi-dimensional measurement tools including education level and subjective social class.

In-Situ Wave Observations in the High Resolution Air-Sea Interaction DRI

DTIC Science & Technology

2007-09-30

directional spectra extracted from the Coastal Data Information Program ( CDIP ) Harvest buoy located in 204 m depth off Point Conception. The initial sea...frequency-directional wave spectra (source: CDIP ). Upper panels: Typical summer-time South swell in the presence of a light North-West wind sea

Postdivorce Family Stability and Changes in Adolescents' Academic Performance: A Growth-Curve Model

ERIC Educational Resources Information Center

Sun, Yongmin; Li, Yuanzhang

2009-01-01

Three waves of panel data from 7,897 adolescents in the National Education Longitudinal Studies have been used to investigate whether a stabilized postdivorce family environment benefits adolescents' academic performance trajectories. The analyses indicate that compared with peers who grow up in stable postdivorce families, children of divorce who…

Marine Exposure of Preservative-Treated Small Wood Panels.

DTIC Science & Technology

1981-04-01

southern noria attack and that creosote impedes teredine attack, pine sapwood , 0.24 to 0.39 growth rings per mm (6-8/in.), a study was initiated in 1969...whereas in piling, wave action and abrasion from The column showing "months exposure to index below floating debris must break away surface areas to

A Chinese Longitudinal Study on Work/Family Enrichment

ERIC Educational Resources Information Center

Lu, Luo

2011-01-01

Purpose: The purpose of this paper is to explore reciprocal relationships between work/family resources, work/family enrichment (WFE), and work/family satisfaction in a Chinese society. Design/methodology/approach: A longitudinal design was adopted using a three-wave panel sample. Data were obtained from 310 Taiwanese employees on three occasions,…

Tailored Panel Management: A Theory-Based Approach to Building and Maintaining Participant Commitment to a Longitudinal Study.

PubMed

Estrada, Mica; Woodcock, Anna; Schultz, P Wesley

2014-02-01

Many psychological processes unfold over time, necessitating longitudinal research designs. Longitudinal research poses a host of methodological challenges, foremost of which is participant attrition. Building on Dillman's work, we provide a review of how social influence and relationship research informs retention strategies in longitudinal studies. Objective: We introduce the tailored panel management (TPM) approach, which is designed to establish communal norms that increase commitment to a longitudinal study, and this commitment, in turn, increases response rates and buffers against attrition. Specifically, we discuss practices regarding compensation, communication, consistency, and credibility that increase longer term commitment to panel participation. Research design: Throughout the article, we describe how TPM is being used in a national longitudinal study of undergraduate minority science students. TheScienceStudy is a continuing panel, which has 12 waves of data collected across 6 academic years, with response rates ranging from 70% to 92%. Although more than 90% of participants have either left or graduated from their undergraduate degree program, this highly mobile group of people remains engaged in the study. TheScienceStudy has usable longitudinal data from 96% of the original panel. Conclusion: This article combines social psychological theory, current best practice, and a detailed case study to illustrate the TPM approach to longitudinal data collection. The approach provides guidance for other longitudinal researchers, and advocates for empirical research into longitudinal research methodologies. © The Author(s) 2014.

The Influence of Social Network Characteristics on Peer Clustering in Smoking: A Two-Wave Panel Study of 19- and 23-Year-Old Swedes.

PubMed

Miething, Alexander; Rostila, Mikael; Edling, Christofer; Rydgren, Jens

2016-01-01

The present study examines how the composition of social networks and perceived relationship content influence peer clustering in smoking, and how the association changes during the transition from late adolescence to early adulthood. The analysis was based on a Swedish two-wave survey sample comprising ego-centric network data. Respondents were 19 years old in the initial wave, and 23 when the follow-up sample was conducted. 17,227 ego-alter dyads were included in the analyses, which corresponds to an average response rate of 48.7 percent. Random effects logistic regression models were performed to calculate gender-specific average marginal effects of social network characteristics on smoking. The association of egos' and alters' smoking behavior was confirmed and found to be stronger when correlated in the female sample. For females, the associations decreased between age 19 and 23. Interactions between network characteristics and peer clustering in smoking showed that intense social interactions with smokers increase egos' smoking probability. The influence of network structures on peer clustering in smoking decreased during the transition from late adolescence to early adulthood. The study confirmed peer clustering in smoking and revealed that females' smoking behavior in particular is determined by social interactions. Female smokers' propensity to interact with other smokers was found to be associated with the quality of peer relationships, frequent social interactions, and network density. The influence of social networks on peer clustering in smoking decreased during the transition from late adolescence to early adulthood.

The Influence of Social Network Characteristics on Peer Clustering in Smoking: A Two-Wave Panel Study of 19- and 23-Year-Old Swedes

PubMed Central

Rostila, Mikael; Edling, Christofer; Rydgren, Jens

2016-01-01

Objectives The present study examines how the composition of social networks and perceived relationship content influence peer clustering in smoking, and how the association changes during the transition from late adolescence to early adulthood. Methods The analysis was based on a Swedish two-wave survey sample comprising ego-centric network data. Respondents were 19 years old in the initial wave, and 23 when the follow-up sample was conducted. 17,227 ego-alter dyads were included in the analyses, which corresponds to an average response rate of 48.7 percent. Random effects logistic regression models were performed to calculate gender-specific average marginal effects of social network characteristics on smoking. Results The association of egos’ and alters’ smoking behavior was confirmed and found to be stronger when correlated in the female sample. For females, the associations decreased between age 19 and 23. Interactions between network characteristics and peer clustering in smoking showed that intense social interactions with smokers increase egos’ smoking probability. The influence of network structures on peer clustering in smoking decreased during the transition from late adolescence to early adulthood. Conclusions The study confirmed peer clustering in smoking and revealed that females’ smoking behavior in particular is determined by social interactions. Female smokers’ propensity to interact with other smokers was found to be associated with the quality of peer relationships, frequent social interactions, and network density. The influence of social networks on peer clustering in smoking decreased during the transition from late adolescence to early adulthood. PMID:27727314

The role of appearance schematicity in the internalization of media appearance ideals: A panel study of preadolescents.

PubMed

Rousseau, Ann; Gamble, Hilary; Eggermont, Steven

2017-10-01

Individuals who are more strongly invested in their appearance, appearance schematics, have a tendency to engage in appearance-related comparison. Appearance schematicity consists of two components. The self-evaluative component concerns the degree to which appearance is central to self-worth, referred to as dysfunctional appearance beliefs. Motivational salience refers to the engagement in behaviors designed to enhance appearance, such as body surveillance. Based on a three-wave panel survey of 973 Flemish preadolescents (M age  = 11.15, SD = 1.13) we found that the motivational and self-evaluative components had a different impact on media internalization. For preadolescents who engaged in more body surveillance, watching television resulted in more media internalization. For preadolescents who had fewer dysfunctional appearance beliefs, watching television resulted in more media internalization. These findings suggest that appearance schematicity is an important susceptibility variable in the relationship between TV-exposure and media internalization, and emphasize the importance of investigating individual dispositions beyond gender differences. Copyright © 2017 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

Mapping Patterns of Multiple Deprivation and Well-Being Using Self-Organizing Maps: An Application to Swiss Household Panel Data

ERIC Educational Resources Information Center

Lucchini, Mario; Assi, Jenny

2013-01-01

The aim of this paper is to propose multidimensional measures of deprivation and wellbeing in contemporary Switzerland, in order to overcome the limitations of standard approaches. More precisely, we have developed self organising maps (SOM) using data drawn from the 2009 Swiss Household Panel wave, in order to identify highly homogeneous clusters…

Simulation of the Flow Field Associated with a Rocket Thruster Having an Attached Panel

NASA Technical Reports Server (NTRS)

Davoudzadeh, Farhad; Liu, Nan-Suey

2003-01-01

Two-dimensional inviscid and viscous numerical simulations are performed to predict the flow field induced by a H2-O2 rocket thruster and to provide insight into the heat load on the articles placed in the hot gas exhaust of the thruster under a variety of operating conditions, using the National Combustion Code (NCC). The simulations have captured physical details of the flow field, such as the plume formation and expansion, formation of the shock waves and their effects on the temperature and pressure distributions on the walls of the apparatus and the flat panel. Comparison between the computed results for 2-D and adiabatic walls and the related experimental measurements for 3-D and cooled walls shows that the results of the simulations are consistent with those obtained from the related rig tests.

Progression of aging in Mexico: the Mexican Health and Aging Study (MHAS) 2012.

PubMed

Wong, Rebeca; Michaels-Obregón, Alejandra; Palloni, Alberto; Gutiérrez-Robledo, Luis Miguel; González-González, César; López-Ortega, Mariana; Téllez-Rojo, Martha María; Mendoza-Alvarado, Laura Rosario

2015-01-01

To describe the third wave of the Mexican Health and Aging Study (MHAS), completed in 2012, and present preliminary results. Descriptive analyses by gender and age group of demographic and socioeconomic characteristics, health conditions and health behaviors, as well as social support and life satisfaction measures are presented. In addition, external validations are presented by comparing MHAS 2012 indicators with other national data sources. For the panel of older adults in the sample, the rate of health care insurance coverage increased greatly between 2001 and 2012, a significantly higher change in rural compared to urban areas. The results for 2012 are consistent with the previous two waves for the main indicators of health and physical disability prevalence, risk factors,and behaviors. The MHAS offers a unique opportunity to study aging in Mexico, as well as to complete cross-national comparisons. The cumulative number of deaths in the cohort should support the study of mortality and its association with health outcomes and behaviors over the life cycle. In addition, the sub-samples of objective markers will enable methodological research on self-reports and associations of biomarkers in old age with similar health outcomes and behaviors.

Progression of aging in Mexico: the Mexican Health and Aging Study (MHAS) 2012

PubMed Central

Wong, Rebeca; Michaels-Obregón, Alejandra; Palloni, Alberto; Gutiérrez-Robledo, Luis Miguel; González-González, César; López-Ortega, Mariana; Téllez-Rojo, Martha María; Mendoza-Alvarado, Laura Rosario

2015-01-01

Objective To describe the third wave of the Mexican Health and Aging Study (MHAS), completed in 2012, and present preliminary results. Materials and methods Descriptive analyses by gender and age group of demographic and socioeconomic characteristics, health conditions and health behaviors, as well as social support and life satisfaction measures are presented. In addition, external validations are presented by comparing MHAS 2012 indicators with other national data sources. Results For the panel of older adults in the sample, the rate of health care insurance coverage increased greatly between 2001 and 2012, a significantly higher change in rural compared to urban areas. The results for 2012 are consistent with the previous two waves for the main indicators of health and physical disability prevalence, risk factors, and behaviors. Conclusions The MHAS offers a unique opportunity to study aging in Mexico, as well as to complete cross-national comparisons. The cumulative number of deaths in the cohort should support the study of mortality and its association with health outcomes and behaviors over the life cycle. In addition, the sub-samples of objective markers will enable methodological research on self-reports and associations of biomarkers in old age with similar health outcomes and behaviors. PMID:26172238

Multi-level risk factors and developmental assets associated with aggressive behavior in disadvantaged adolescents.

PubMed

Smokowski, Paul R; Guo, Shenyang; Cotter, Katie L; Evans, Caroline B R; Rose, Roderick A

2016-01-01

The current study examined multilevel risk factors and developmental assets on longitudinal trajectories of aggressive behavior in a diverse sample of rural adolescents. Using ecological and social capital theories, we explored the impact of positive and negative proximal processes, social capital, and contextual characteristics (i.e., school and neighborhood) on adolescent aggression. Data came from the Rural Adaptation Project, which is a 5-year longitudinal panel study of more than 4,000 middle and high school students from 40 public schools in two rural, low income counties in North Carolina. A three-level HLM model (N = 4,056 at Wave 1, 4,251 at Wave 2, and 4,256 at Wave 3) was estimated to predict factors affecting the change trajectories of aggression. Results indicated that negative proximal processes in the form of parent-adolescent conflict, friend rejection, peer pressure, delinquent friends, and school hassles were significant predictors of aggression. In addition, social capital in the form of ethnic identity, religious orientation, and school satisfaction served as buffers against aggression. Negative proximal processes were more salient predictors than positive proximal processes. School and neighborhood characteristics had a minimal impact on aggression. Overall, rates of aggression did not change significantly over the 3-year study window. Findings highlight the need to intervene in order to decrease negative interactions in the peer and parent domains. © 2015 Wiley Periodicals, Inc.

Ground roll attenuation using polarization analysis in the t-f-k domain

NASA Astrophysics Data System (ADS)

Wang, C.; Wang, Y.

2017-07-01

S waves travel slower than P waves and have a lower dominant frequency. Therefore, applying common techniques such as time-frequency filtering and f-k filtering to separate S waves from ground roll is difficult because ground roll is also characterized by slow velocity and low frequency. In this study, we present a method for attenuating ground roll using a polarization filtering method based on the t-f-k transform. We describe the particle motion of the waves by complex vector signals. Each pair of frequency components, whose frequencies have the same absolute value but different signs, of the complex signal indicate an elliptical or linear motion. The polarization parameters of the elliptical or linear motion are explicitly related to the two Fourier coefficients. We then extend these concepts to the t-f-k domain and propose a polarization filtering method for ground roll attenuation based on the t-f-k transform. The proposed approach can define automatically the time-varying reject zones on the f-k panel at different times as a function of the reciprocal ellipticity. Four attributes, time, frequency, apparent velocity and polarization are used to identify and extract the ground roll simultaneously. Thus, the ground roll and body waves can be separated as long as they are dissimilar in one of these attributes. We compare our method with commonly used filtering techniques by applying the methods to synthetic and real seismic data. The results indicate that our method can attenuate ground roll while preserving body waves more effectively than the other methods.

U.S. adults' pornography viewing and support for abortion: a three-wave panel study.

PubMed

Tokunaga, Robert S; Wright, Paul J; McKinley, Christopher J

2015-01-01

Pornography consumption may affect judgments on a wide range of sexual and reproductive topics. The present study hypothesized that the consistent images projected in pornography affect sexual scripts related to abortion judgments. National, three-wave longitudinal data gathered from U.S. adults were employed to examine associations between earlier pornography consumption and subsequent support for abortion. The findings suggested that prior pornography consumption may lead to later support for abortion. This study provides additional evidence of pornography's socializing impact, particularly for the older White segment of the population, and adds to knowledge about what environmental factors influence judgments about abortion. Mechanisms that may explain how pornography viewing shapes support for abortion are discussed.

Minority population group status and QOL change: The case of older Israelis.

PubMed

Damri, Noam; Litwin, Howard

2016-12-01

This study explores minority group status in relation to change in Quality of Life (QOL) among three population groups in Israel-Veteran Jews, Arab-Israelis and immigrants from the Former Soviet Union (FSU)-controlling for a set of known predictors. The study uses panel data from two waves (2009/10 and 2013) of the Israeli component of the Survey of Health, Ageing and Retirement in Europe, (N=1,590). A set of Ordinary Least Squares regressions is used to predict positive QOL change over the two waves. Interaction terms in a number of selected areas are considered. The results show that minority group status (Arab-Israelis and FSU immigrants) is negatively related to positive QOL change, compared to the majority group (Veteran Jews). Moreover, being employed was found to improve QOL for older FSU immigrants, underscoring the realm of work in the well-being of this population group. In comparison, it was exchange with family members that had a positive effect on QOL change among the Arab-Israelis, emphasizing the importance of that particular aspect of their lives in older age. In sum, the results highlight the risk of minority group status to well-being in late life and confirms the observation that positive QOL change correlates with characteristically different factors among different population groups.

Saltless solar pond

NASA Technical Reports Server (NTRS)

Lin, E. I. H. (Inventor)

1984-01-01

A solar pond adapted for efficiently trapping and storing radiant solar energy without the use of a salt concentration gradient in the pond is disclosed. A body of water which may be fresh, saline, relatively clear or turbid, is substantially covered by a plurality of floating honeycomb panels. The honeycomb panels are made of a material such as glass which is pervious to short wave solar radiation but impervious to infrared radiation. Each honeycomb panel includes a multitude of honeycomb cells. The honeycomb panels are divided into the elongated honeycomb cells by a multitude of intermediate plates disposed between a bottom plate and top plate of the panel. The solar pond is well suited for providing hot water of approximately 85 to 90 C temperature for direct heating applications, and for electrical power generation.

The Social Mobility-Fertility Hypothesis: A Racial and Class Comparison Among Southern Females.

ERIC Educational Resources Information Center

White, Carolyn Delores

Utilizing data derived from the Southern Youth Study (a six-year, three-wave panel of 528 rural women from the Deep South), the utility of a version of the Social Mobility Fertility Hypothesis was investigated. Specifically, the relationship between mobility attitudes of sophomores and seniors and their subsequent fertility behavior was assessed…

Effect of Changes in Sleep Quantity and Quality on Depressive Symptoms among Korean Children

ERIC Educational Resources Information Center

Lee, Joo Eun; Park, Sohee; Nam, Jin-Young; Ju, Young Jun; Park, Eun-Cheol

2017-01-01

This study aims to determine whether changes in sleep quantity and quality in childhood are associated with incidence of depressive symptoms. We used the three waves of the Korean Children & Youth Panel Survey (2011-2013). Statistical analysis using a generalized estimating equation model was performed. The 2,605 subjects analyzed included…

Exiting and Entering High-Poverty Neighborhoods: Latinos, Blacks and Anglos Compared

ERIC Educational Resources Information Center

South, Scott J.; Crowder, Kyle; Chavez, Erick

2005-01-01

A special sample from the 1990-1995 waves of the Panel Study of Income Dynamics is used to examine differences in the patterns and determinants of residential mobility between high-poverty and lower-poverty neighborhoods among Latinos, blacks and Anglos. Householders of Mexican, Puerto Rican and Cuban origin are significantly less likely than…

Examining the Relations between Executive Function, Math, and Literacy during the Transition to Kindergarten: A Multi-Analytic Approach

ERIC Educational Resources Information Center

Schmitt, Sara A.; Geldhof, G. John; Purpura, David J.; Duncan, Robert; McClelland, Megan M.

2017-01-01

The present study explored the bidirectional and longitudinal associations between executive function (EF) and early academic skills (math and literacy) across 4 waves of measurement during the transition from preschool to kindergarten using 2 complementary analytical approaches: cross-lagged panel modeling and latent growth curve modeling (LCGM).…

Solidarity and Conflict between Adult Children and Parents: A Latent Class Analysis

ERIC Educational Resources Information Center

van Gaalen, Ruben I.; Dykstra, Pearl A.

2006-01-01

Using multiple dimensions of solidarity and conflict in a latent class analysis, we develop a typology of adult child-parent relationships. The data (N = 4,990) are from the first wave of the Netherlands Kinship Panel Study. In descending order of relationship quality, the 5 types are harmonious (akin to relationships with friends), ambivalent…

Experimental Study of the Bending Properties and Deformation Analysis of Web-Reinforced Composite Sandwich Floor Slabs with Four Simply Supported Edges.

PubMed

Qi, Yujun; Fang, Hai; Liu, Weiqing

2016-01-01

Web-reinforced composite sandwich panels exhibit good mechanical properties in one-way bending, but few studies have investigated their flexural behavior and deformation calculation methods under conditions of four simply supported edges. This paper studies the bending performance of and deformation calculation methods for two-way web-reinforced composite sandwich panels with different web spacing and heights. Polyurethane foam, two-way orthogonal glass-fiber woven cloth and unsaturated resin were used as raw materials in this study. Vacuum infusion molding was used to prepare an ordinary composite sandwich panel and 5 web-reinforced composite sandwich panels with different spacing and web heights. The panels were subjected to two-way panel bending tests with simple support for all four edges. The mechanical properties of these sandwich panels during the elastic stage were determined by applying uniformly distributed loads. The non-linear mechanical characteristics and failure modes were obtained under centrally concentrated loading. Finally, simulations of the sandwich panels, which used the mechanical model established herein, were used to deduce the formulae for the deflection deformation for this type of sandwich panel. The experimental results show that webs can significantly improve the limit bearing capacity and flexural rigidity of sandwich panels, with smaller web spacing producing a stronger effect. When the web spacing is 75 mm, the limit bearing capacity is 4.63 times that of an ordinary sandwich panel. The deduced deflection calculation formulae provide values that agree well with the measurements (maximum error <15%). The results that are obtained herein can provide a foundation for the structural design of this type of panel.

Experimental Study of the Bending Properties and Deformation Analysis of Web-Reinforced Composite Sandwich Floor Slabs with Four Simply Supported Edges

PubMed Central

Qi, Yujun; Fang, Hai; Liu, Weiqing

2016-01-01

Web-reinforced composite sandwich panels exhibit good mechanical properties in one-way bending, but few studies have investigated their flexural behavior and deformation calculation methods under conditions of four simply supported edges. This paper studies the bending performance of and deformation calculation methods for two-way web-reinforced composite sandwich panels with different web spacing and heights. Polyurethane foam, two-way orthogonal glass-fiber woven cloth and unsaturated resin were used as raw materials in this study. Vacuum infusion molding was used to prepare an ordinary composite sandwich panel and 5 web-reinforced composite sandwich panels with different spacing and web heights. The panels were subjected to two-way panel bending tests with simple support for all four edges. The mechanical properties of these sandwich panels during the elastic stage were determined by applying uniformly distributed loads. The non-linear mechanical characteristics and failure modes were obtained under centrally concentrated loading. Finally, simulations of the sandwich panels, which used the mechanical model established herein, were used to deduce the formulae for the deflection deformation for this type of sandwich panel. The experimental results show that webs can significantly improve the limit bearing capacity and flexural rigidity of sandwich panels, with smaller web spacing producing a stronger effect. When the web spacing is 75 mm, the limit bearing capacity is 4.63 times that of an ordinary sandwich panel. The deduced deflection calculation formulae provide values that agree well with the measurements (maximum error <15%). The results that are obtained herein can provide a foundation for the structural design of this type of panel. PMID:26871435

Projected Changes on the Global Surface Wave Drift Climate towards the END of the Twenty-First Century

NASA Astrophysics Data System (ADS)

Carrasco, Ana; Semedo, Alvaro; Behrens, Arno; Weisse, Ralf; Breivik, Øyvind; Saetra, Øyvind; Håkon Christensen, Kai

2016-04-01

The global wave-induced current (the Stokes Drift - SD) is an important feature of the ocean surface, with mean values close to 10 cm/s along the extra-tropical storm tracks in both hemispheres. Besides the horizontal displacement of large volumes of water the SD also plays an important role in the ocean mix-layer turbulence structure, particularly in stormy or high wind speed areas. The role of the wave-induced currents in the ocean mix-layer and in the sea surface temperature (SST) is currently a hot topic of air-sea interaction research, from forecast to climate ranges. The SD is mostly driven by wind sea waves and highly sensitive to changes in the overlaying wind speed and direction. The impact of climate change in the global wave-induced current climate will be presented. The wave model WAM has been forced by the global climate model (GCM) ECHAM5 wind speed (at 10 m height) and ice, for present-day and potential future climate conditions towards the end of the end of the twenty-first century, represented by the Intergovernmental Panel for Climate Change (IPCC) CMIP3 (Coupled Model Inter-comparison Project phase 3) A1B greenhouse gas emission scenario (usually referred to as a ''medium-high emissions'' scenario). Several wave parameters were stored as output in the WAM model simulations, including the wave spectra. The 6 hourly and 0.5°×0.5°, temporal and space resolution, wave spectra were used to compute the SD global climate of two 32-yr periods, representative of the end of the twentieth (1959-1990) and twenty-first (1969-2100) centuries. Comparisons of the present climate run with the ECMWF (European Centre for Medium-Range Weather Forecasts) ERA-40 reanalysis are used to assess the capability of the WAM-ECHAM5 runs to produce realistic SD results. This study is part of the WRCP-JCOMM COWCLIP (Coordinated Ocean Wave Climate Project) effort.

Composite panels made with biofiber or office wastepaper bonded with thermoplastic and/or thermosetting resin

Treesearch

James H. Muehl; Andrzej M. Krzysik; Poo Chow

2004-01-01

The purpose of this study was to evaluate two groups of composite panels made from two types of underutilized natural fiber sources, kenaf bast fiber and office wastepaper, for their suitability in composite panels. All panels were made with 5% thermosetting phenol-formaldehyde (PF) resin and 1.5% wax. Also, an additional 10% polypropylene (PP) thermoplastic resin was...

Comparing Dropout Predictors for Two State-Level Panels Using Grade 6 and Grade 8 Data

ERIC Educational Resources Information Center

Franklin, Bobby J.; Trouard, Stephen B.

2016-01-01

The purpose of this study was to examine the effectiveness of dropout predictors across time. Two state-level high school graduation panels were selected to begin with the seventh and ninth grades but end at the same time. The first panel (seventh grade) contained 29,554 students and used sixth grade predictors. The second panel (ninth grade)…

Characteristics of a wind-actuated aerodynamic braking device for high-speed trains

NASA Astrophysics Data System (ADS)

Takami, H.; Maekawa, H.

2017-04-01

To shorten the stopping distance of the high speed trains in case of emergency, we developed a small-sized aerodynamic braking unit without use of the friction between a rail and a wheel. The developed device could actuate a pair of two drag panels with a travelling wind. However, after the drag panel fully opened, vibrational movements of the drag panel characterized by its slight flutter were repeated. In this study, to stabilize the opened panel, matters pertaining to the angle of attack with respect to the drag panel and pertaining to the arrangement of the two panels were examined by a wind tunnel experiment using a scale model. As a result, to stabilize the opened panel and to keep the good performance of the braking device, it is found out that an angle of attack of 75 to 80 degrees is suitable provided that the interval of the two panels is narrow enough.

Reliability of stiffened structural panels: Two examples

NASA Technical Reports Server (NTRS)

Stroud, W. Jefferson; Davis, D. Dale, Jr.; Maring, Lise D.; Krishnamurthy, Thiagaraja; Elishakoff, Isaac

1992-01-01

The reliability of two graphite-epoxy stiffened panels that contain uncertainties is examined. For one panel, the effect of an overall bow-type initial imperfection is studied. The size of the bow is assumed to be a random variable. The failure mode is buckling. The benefits of quality control are explored by using truncated distributions. For the other panel, the effect of uncertainties in a strain-based failure criterion is studied. The allowable strains are assumed to be random variables. A geometrically nonlinear analysis is used to calculate a detailed strain distribution near an elliptical access hole in a wing panel that was tested to failure. Calculated strains are used to predict failure. Results are compared with the experimental failure load of the panel.

Muscle mass decline, arterial stiffness, white matter hyperintensity, and cognitive impairment: Japan Shimanami Health Promoting Program study.

PubMed

Kohara, Katsuhiko; Okada, Yoko; Ochi, Masayuki; Ohara, Maya; Nagai, Tokihisa; Tabara, Yasuharu; Igase, Michiya

2017-08-01

There is a close association between frailty and cognitive impairment. However, the underlying contribution of sarcopenia to the development of cognitive impairment is unclear. We investigated the possible association between muscle mass decline and cognitive impairment in a cross-sectional study of 1518 subjects aged 55 years or above. We also evaluated arterial stiffness and white matter hyperintensities (WMHs) as possible underlying mechanisms for this association. Two sarcopenic indices were measured: thigh muscle cross-sectional area (CSA; calculated by computed tomography) and skeletal muscle mass (bioelectric impedance). Muscle mass decline was defined as either the bottom 10% or 20% of participants for each sex. Cognitive function was assessed using the Touch Panel-type Dementia Assessment Scale, and brachial-ankle pulse wave velocity was measured as an index of arterial stiffness. Both sarcopenic indices were modestly but significantly associated with brachial-ankle pulse wave velocity in male and female subjects. The presence of WMHs was significantly associated with low thigh muscle CSA in men and with low skeletal muscle mass in women. The Touch Panel-type Dementia Assessment Scale score was modestly but significantly and positively associated with thigh muscle CSA in men and skeletal muscle mass in women. Muscle mass decline in the bottom 10% of participants on both sarcopenic indices was significantly and independently related to cognitive impairment in women. Lower sarcopenic indices are significantly related to lower cognitive scores. Arterial stiffness and WMHs could account, at least in part, for this association. © 2017 The Authors. Journal of Cachexia, Sarcopenia and Muscle published by John Wiley & Sons Ltd on behalf of the Society on Sarcopenia, Cachexia and Wasting Disorders.

Lightweight panel study 2012: Perceptions and usage by North American wood products manufacturers

Treesearch

Urs Buehlmann; Matt Bumgardner; Karl D. Forth

2012-01-01

Lightweight panels (panels made of two thin panels on the outside and a lightweight material in the core) can offer enhanced performance, reduced material use, and new design opportunities over traditional types of panels. Opportunities exist for the adoption of lightweight panels by the secondary wood industry in North America, as 62 percent of respondents to a recent...

Elimination of image flicker in a fringe-field switching liquid crystal display by applying a bipolar voltage wave.

PubMed

Oh, Seung-Won; Park, Jun-Hee; Lee, Ji-Hoon; Yoon, Tae-Hoon

2015-09-07

Recently, low-frequency driving of liquid crystal display (LCD) panels to minimize power consumption has drawn much attention. In the case in which an LCD panel is driven by a fringe-field at a low frequency, the image flickering phenomenon occurs when the sign of the applied electric field is reversed. We investigated image flickering induced by the flexoelectric effect in a fringe-field switching (FFS) liquid crystal cell in terms of the transmittance difference between frames and the ripple phenomenon. Experimental results show that image flicker due to transmittance difference can be eliminated completely and that the ripple phenomena can be reduced significantly by applying a bipolar voltage wave to the FFS cell.

Reflected wave manipulation by inhomogeneous impedance via varying-depth acoustic liners

NASA Astrophysics Data System (ADS)

Guo, Jingwen; Zhang, Xin; Fang, Yi; Fattah, Ryu

2018-05-01

Acoustic liners, consisting of a perforated panel affixed to a honeycomb core with a rigid back plate, are widely used for noise attenuation purpose. In this study, by exploiting inhomogeneous impedance properties, we report an experimental and numerical study on a liner-type acoustic metasurface, which possesses the functionality of both reflected wave manipulation and sound energy attenuation simultaneously. To realize the inhomogeneous acoustic impedance, an acoustic metasurface constructed by varying-depth acoustic liners is designed and fabricated. The reflected sound pressure fields induced by the metasurface are obtained in both experiments and simulations. A complete characterization of this metasurface is performed, including the effects of depth gradient, incident angle, and incident frequency. Anomalous reflection, apparent negative reflection, and conversion from an incident wave to a surface wave with strong energy dissipation are achieved by the structure. Moreover, our proposed structure can overcome the single frequency performance limitation that exists in conventional metasurfaces and performs well in a broadband frequency range. The proposed acoustic metasurface offers flexibility in controlling the direction of sound wave propagation with energy dissipation property and holds promise for various applications of noise reduction.

Fiber Reinforced Composite Cores and Panels

NASA Technical Reports Server (NTRS)

Day, Stephen W. (Inventor); Campbell, G. Scott (Inventor); Tilton, Danny E. (Inventor); Stoll, Frederick (Inventor); Sheppard, Michael (Inventor); Banerjee, Robin (Inventor)

2013-01-01

A fiber reinforced core panel is formed from strips of plastics foam helically wound with layers of rovings to form webs which may extend in a wave pattern or may intersect transverse webs. Hollow tubes may replace foam strips. Axial rovings cooperate with overlying helically wound rovings to form a beam or a column. Wound roving patterns may vary along strips for structural efficiency. Wound strips may alternate with spaced strips, and spacers between the strips enhance web buckling strength. Continuously wound rovings between spaced strips permit folding to form panels with reinforced edges. Continuously wound strips are helically wrapped to form annular structures, and composite panels may combine both thermoset and thermoplastic resins. Continuously wound strips or strip sections may be continuously fed either longitudinally or laterally into molding apparatus which may receive skin materials to form reinforced composite panels.

Development of a hybrid wave based-transfer matrix model for sound transmission analysis.

PubMed

Dijckmans, A; Vermeir, G

2013-04-01

In this paper, a hybrid wave based-transfer matrix model is presented that allows for the investigation of the sound transmission through finite multilayered structures placed between two reverberant rooms. The multilayered structure may consist of an arbitrary configuration of fluid, elastic, or poro-elastic layers. The field variables (structural displacements and sound pressures) are expanded in terms of structural and acoustic wave functions. The boundary and continuity conditions in the rooms determine the participation factors in the pressure expansions. The displacement of the multilayered structure is determined by the mechanical impedance matrix, which gives a relation between the pressures and transverse displacements at both sides of the structure. The elements of this matrix are calculated with the transfer matrix method. First, the hybrid model is numerically validated. Next a comparison is made with sound transmission loss measurements of a hollow brick wall and a sandwich panel. Finally, numerical simulations show the influence of structural damping, room dimensions and plate dimensions on the sound transmission loss of multilayered structures.

Plate Wave Resonance with Air-Coupled Ultrasonics

NASA Astrophysics Data System (ADS)

Bar, H. N.; Dayal, V.; Barnard, D.; Hsu, D. K.

2010-02-01

Air-coupled ultrasonic transducers can excite plate waves in metals and composites. The coincidence effect, i.e., the wave vector of plate wave coincides with projection of exciting airborne sound vector, leads to a resonance which strongly amplifies the sound transmission through the plate. The resonance depends on the angle of incidence and the frequency. In the present study, the incidence angle for maximum transmission (θmax) is measured in plates of steel, aluminum, carbon fiber reinforced composites and honeycomb sandwich panels. The variations of (θmax) with plate thickness are compared with theoretical values in steel, aluminum and quasi-isotropic carbon fiber composites. The enhanced transmission of air-coupled ultrasound at oblique incidence can substantially improve the probability of flaw detection in plates and especially in honeycomb structures. Experimental air-coupled ultrasonic scan of subtle flaws in CFRP laminates showed definite improvement of signal-to-noise ratio with oblique incidence at θmax.

Was the media campaign that supported Australia's new pictorial cigarette warning labels and plain packaging policy associated with more attention to and talking about warning labels?

PubMed

Nagelhout, Gera E; Osman, Amira; Yong, Hua-Hie; Huang, Li-Ling; Borland, Ron; Thrasher, James F

2015-10-01

Population-level interventions can possibly enhance each other's effects when they are implemented simultaneously. When the plain packaging policy was implemented in Australia, pictorial health warning labels (HWLs) on cigarette packages were also updated and a national mass media campaign was aired. This study examined whether smokers who recalled the media campaign reported more attention to and talking about HWLs. Longitudinal survey data was obtained among Australian adult smokers, aged 18 years and older, from an online consumer panel. One survey wave was conducted before (September 2012) and two waves were conducted after (January 2013 and May 2013) the interventions. The sample was replenished to maintain a sample size of 1000 participants at each wave. Generalized Estimating Equations analyses were performed. Compared to wave 1, attention to HWLs increased at wave 2 (b=0.32, SE=0.06, p<0.001), but not at wave 3 (b=0.10, SE=0.08, p=0.198). Talking about HWLs increased over time (IRR=1.82, 95% CI=1.58-2.09 and IRR=1.25, 95% CI=1.05-1.47, at wave 2 and wave 3 respectively). Campaign recall was significantly associated with more attention to HWLs (b=0.29, SE=0.05, p<0.001) and with more talking about HWLs (IRR=1.17, 95% CI=1.06-1.29) with similar effects across waves 2 and 3. Recall of the campaign was associated with more attention to and talking about HWLs. When adjusting for campaign recall, there was still an increasing trend in attention and talking. This suggests that the media campaign and the new packaging and labeling policies had independent and positive effects on attention to and talking about HWLs. Copyright © 2015 Elsevier Ltd. All rights reserved.

Was the media campaign that supported Australia’s new pictorial cigarette warning labels and plain packaging policy associated with more attention to and talking about warning labels?

PubMed Central

Nagelhout, Gera E.; Osman, Amira; Yong, Hua-Hie; Huang, Li-Ling; Borland, Ron; Thrasher, James F.

2016-01-01

Background Population-level interventions can possibly enhance each other’s effects when they are implemented simultaneously. When the plain packaging policy was implemented in Australia, pictorial health warning labels (HWLs) on cigarette packages were also updated and a national mass media campaign was aired. This study examined whether smokers who recalled the media campaign reported more attention to and talking about HWLs. Methods Longitudinal survey data was obtained among Australian adult smokers, aged 18 years and older, from an online consumer panel. One survey wave was conducted before (September 2012) and two waves were conducted after (January 2013 and May 2013) the interventions. The sample was replenished to maintain a sample size of 1000 participants at each wave. Generalized Estimating Equations analyses were performed. Results Compared to wave 1, attention to HWLs increased at wave 2 (b = 0.32, SE = 0.06, p < 0.001), but not at wave 3 (b = 0.10, SE = 0.08, p = 0.198). Talking about HWLs increased over time (IRR = 1.82, 95% CI = 1.58–2.09 and IRR = 1.25, 95% CI = 1.05–1.47, at wave 2 and wave 3 respectively). Campaign recall was significantly associated with more attention to HWLs (b = 0.29, SE = 0.05, p < 0.001) and with more talking about HWLs (IRR = 1.17, 95% CI = 1.06–1.29) with similar effects across waves 2 and 3. Conclusions Recall of the campaign was associated with more attention to and talking about HWLs. When adjusting for campaign recall, there was still an increasing trend in attention and talking. This suggests that the media campaign and the new packaging and labeling policies had independent and positive effects on attention to and talking about HWLs. PMID:26050643

Parental Support, Partner Support, and the Trajectories of Mastery from Adolescence to Early Adulthood

ERIC Educational Resources Information Center

Surjadi, Florensia F.; Lorenz, Frederick O.; Wickrama, K. A. S.; Conger, Rand D.

2011-01-01

This study examines the long-term associations among parental support, extra-familial partner support, and the trajectories of sense of mastery from adolescence to the early adulthood years. Ten waves of panel data collected over a 16-year period from the Iowa Family Transitions Project (N = 527) were used to test the hypotheses. Results indicated…

Impact-damaged graphite-thermoplastic trapezoidal-corrugation sandwich and semi-sandwich panels

NASA Technical Reports Server (NTRS)

Jegley, D.

1993-01-01

The results of a study of the effects of impact damage on compression-loaded trapezoidal-corrugation sandwich and semi-sandwich graphite-thermoplastic panels are presented. Sandwich panels with two identical face sheets and a trapezoidal corrugated core between them, and semi-sandwich panels with a corrugation attached to a single skin are considered in this study. Panels were designed, fabricated and tested. The panels were made using the manufacturing process of thermoforming, a less-commonly used technique for fabricating composite parts. Experimental results for unimpacted control panels and panels subjected to impact damage prior to loading are presented. Little work can be found in the literature about these configurations of thermoformed panels.

The serpentine end-matched joint: evaluating strength and stability

Treesearch

Charles J. Gatchell; Curtis C. Peters

1981-01-01

The Serpentine end-matched (Sem) joint is a precisely machined butt joint with a sine wave shape. The joint is not readily visible to the eye and performs well in panels made of sugar maple, red oak, black walnut, and black cherry. The Sem joint is unaffected by changes in equilibrium moisture content from 6 to 12 to 18 to 6 percent. Panels containing Sem joints have...

Cumulative exposure to childhood stressors and subsequent psychological distress. An analysis of US panel data.

PubMed

Björkenstam, Emma; Burström, Bo; Brännström, Lars; Vinnerljung, Bo; Björkenstam, Charlotte; Pebley, Anne R

2015-10-01

Research has shown that childhood stress increases the risk of poor mental health later in life. We examined the effect of childhood stressors on psychological distress and self-reported depression in young adulthood. Data were obtained from the Child Development Supplement (CDS) to the national Panel Study of Income Dynamics (PSID), a survey of US families that incorporates data from parents and their children. In 2005 and 2007, the Panel Study of Income Dynamics was supplemented with two waves of Transition into Adulthood (TA) data drawn from a national sample of young adults, 18-23 years old. This study included data from participants in the CDS and the TA (n = 2128), children aged 4-13 at baseline. Data on current psychological distress was used as an outcome variable in logistic regressions, calculated as odds ratios (OR) with 95% confidence intervals (CI). Latent Class Analyses were used to identify clusters based on the different childhood stressors. Associations were observed between cumulative exposure to childhood stressors and both psychological distress and self-reported depression. Individuals being exposed to three or more stressors had the highest risk (crude OR for psychological distress: 2.49 (95% CI: 1.16-5.33), crude OR for self-reported depression: 2.07 (95% CI: 1.15-3.71). However, a large part was explained by adolescent depressive symptoms. Findings support the long-term negative impact of cumulative exposure to childhood stress on psychological distress. The important role of adolescent depression in this association also needs to be taken into consideration in future studies. Copyright © 2015 Elsevier Ltd. All rights reserved.

Advanced Instrumentation for Aero Engine Components: Conference Proceedings of the Propulsion and Energetics Panel Symposium (67th) Held in Philadelphia, Pennsylvania on 19-23 May 1986.

DTIC Science & Technology

1986-11-01

optical wave-mixing am., interact via the third order non linear susceptibility of the medium to produce a coherent laser-like signal beam at the higher...is the third order non- linear susceptibility of the medium and determines the shape of the CARS spectrum. It is the sum of a resonant contribution and...simultaneously using an appropriate spectrograph/optical multichannel detector; intensified linear diode array detectors are now used in most systems. The two

Characterization of terahertz waves on foreign materials of composite materials

NASA Astrophysics Data System (ADS)

Im, Kwang-Hee; Kim, Sun-Kyu; Chiou, Chien-Ping; Jung, Jong-An

2018-04-01

Carbon-fiber reinforced plastics (CFRP) are widely utilized due to their comparatively high performance in engineering structures. It is well understood that a nondestructive technique would be very beneficial. A new terahertz radiation has been recognized for its importance in technological applications. Recently, T-ray (terahertz ray) advances in technology and instrumentation have provided a probing field on the electromagnetic spectrum. In carbon composites, the penetration characterization of T-ray waves was fundamentally investigated in order to measure the painting thickness. Also, another study dealt with THz scan images of honeycomb sandwich composite panels using a refractive index (n), an absorption coefficient (α), the electrical conductivity of glass fiber embedded epoxy matrix composites, and carbon fiber reinforced plastics (CFRP) skin. For experiments, a method of detecting FRP composites with impact damage is presented, which utilizes aluminum wires intertwined with woven carbon fibers as they are inserted into the surface of the CFRP honeycomb sandwich panels. Intensive characterization of T-ray for the nondestructive evaluation (NDE) of carbon composite reinforced plastics (CFRP) composites is discussed in relation to the E-field influence with CFRP composite laminates.

Analysis of unsteady flow over Offshore Wind Turbine in combination with different types of foundations

NASA Astrophysics Data System (ADS)

Alesbe, Israa; Abdel-Maksoud, Moustafa; Aljabair, Sattar

2017-06-01

Environmental effects have an important influence on Offshore Wind Turbine (OWT) power generation efficiency and the structural stability of such turbines. In this study, we use an in-house Boundary Element (BEM)— panMARE code—to simulate the unsteady flow behavior of a full OWT with various combinations of aerodynamic and hydrodynamic loads in the time domain. This code is implemented to simulate potential flows for different applications and is based on a three-dimensional first-order panel method. Three different OWT configurations consisting of a generic 5 MW NREL rotor with three different types of foundations (Monopile, Tripod, and Jacket) are investigated. These three configurations are analyzed using the RANSE solver which is carried out using ANSYS CFX for validating the corresponding results. The simulations are performed under the same environmental atmospheric wind shear and rotor angular velocity, and the wave properties are wave height of 4 m and wave period of 7.16 s. In the present work, wave environmental effects were investigated firstly for the two solvers, and good agreement is achieved. Moreover, pressure distribution in each OWT case is presented, including detailed information about local flow fields. The time history of the forces at inflow direction and its moments around the mudline at each OWT part are presented in a dimensionless form with respect to the mean value of the last three loads and the moment amplitudes obtained from the BEM code, where the contribution of rotor force is lower in the tripod case and higher in the jacket case and the calculated hydrodynamic load that effect on jacket foundation type is lower than other two cases.

Axial Compression Behavior of a New Type of Prefabricated Concrete Sandwich Wall Panel

NASA Astrophysics Data System (ADS)

Qun, Xie; Shuai, Wang; Chun, Liu

2018-03-01

A novel type of prefabricated concrete sandwich wall panel which could be used as a load-bearing structural element in buildings has been presented in this paper. Compared with the traditional sandwich panels, there are several typical characteristics for this wall system, including core columns confined by spiral stirrup along the cross-section of panel with 600mm spacing, precast foamed concrete block between two structural layers as internal insulation part, and a three-dimensional (3D) steel wire skeleton in each layer which is composed of two vertical steel wire meshes connected by horizontally short steel bar. All steel segments in the panel are automatically prefabricated in factory and then are assembled to form steel system in site. In order to investigate the structural behavior of this wall panel, two full-scale panels have been experimentally studied under axial compressive load. The test results show that the wall panel presents good load-bearing capacity and integral stiffness without out-of-plane flexural failure. Compared to the panel with planar steel wire mesh in concrete layer, the panel with 3D steel wire skeleton presents higher strength and better rigidity even in the condition of same steel ratio in panels which verifies that the 3D steel skeleton could greatly enhance the structural behavior of sandwich panel.

The effect on the transmission loss of a double wall panel of using helium gas in the gap

NASA Astrophysics Data System (ADS)

Atwal, M. S.; Crocker, M. J.

The possibility of increasing the sound-power transmission loss of a double panel by using helium gas in the gap is investigated. The transmission loss of a panel is defined as ten times the common logarithm of the ratio of the sound power incident on the panel to the sound power transmitted to the space on the other side of the panel. The work is associated with extensive research being done to develop new techniques for predicting the interior noise levels on board high-speed advanced turboprop aircraft and reducing the noise levels with a minimum weight penalty. Helium gas was chosen for its inert properties and its low impedance compared with air. With helium in the gap, the impedance mismatch experienced by the sound wave will be greater than that with air in the gap. It is seen that helium gas in the gap increases the transmission loss of the double panel over a wide range of frequencies.

The effect on the transmission loss of a double wall panel of using helium gas in the gap

NASA Technical Reports Server (NTRS)

Atwal, M. S.; Crocker, M. J.

1985-01-01

The possibility of increasing the sound-power transmission loss of a double panel by using helium gas in the gap is investigated. The transmission loss of a panel is defined as ten times the common logarithm of the ratio of the sound power incident on the panel to the sound power transmitted to the space on the other side of the panel. The work is associated with extensive research being done to develop new techniques for predicting the interior noise levels on board high-speed advanced turboprop aircraft and reducing the noise levels with a minimum weight penalty. Helium gas was chosen for its inert properties and its low impedance compared with air. With helium in the gap, the impedance mismatch experienced by the sound wave will be greater than that with air in the gap. It is seen that helium gas in the gap increases the transmission loss of the double panel over a wide range of frequencies.

The measurement of acoustic properties of limited size panels by use of a parametric source

NASA Astrophysics Data System (ADS)

Humphrey, V. F.

1985-01-01

A method of measuring the acoustic properties of limited size panels immersed in water, with a truncated parametric array used as the acoustic source, is described. The insertion loss and reflection loss of thin metallic panels, typically 0·45 m square, were measured at normal incidence by using this technique. Results were obtained for a wide range of frequencies (10 to 100 kHz) and were found to be in good agreement with the theoretical predictions for plane waves. Measurements were also made of the insertion loss of aluminium, Perspex and G.R.P. panels for angles of incidence up to 50°. The broad bandwidth available from the parametric source permitted detailed measurements to be made over a wide frequency range using a single transmitting transducer. The small spot sizes obtainable with the parametric source also helped to reduce the significance of diffraction from edges of the panel under test.

A Spectral Analysis Approach for Acoustic Radiation from Composite Panels

NASA Technical Reports Server (NTRS)

Turner, Travis L.; Singh, Mahendra P.; Mei, Chuh

2004-01-01

A method is developed to predict the vibration response of a composite panel and the resulting far-field acoustic radiation due to acoustic excitation. The acoustic excitation is assumed to consist of obliquely incident plane waves. The panel is modeled by a finite element analysis and the radiated field is predicted using Rayleigh's integral. The approach can easily include other effects such as shape memory alloy (SMA) ber reinforcement, large detection thermal postbuckling, and non-symmetric SMA distribution or lamination. Transmission loss predictions for the case of an aluminum panel excited by a harmonic acoustic pressure are shown to compare very well with a classical analysis. Results for a composite panel with and without shape memory alloy reinforcement are also presented. The preliminary results demonstrate that the transmission loss can be significantly increased with shape memory alloy reinforcement. The mechanisms for further transmission loss improvement are identified and discussed.

Image quality and radiation dose on digital chest imaging: comparison of amorphous silicon and amorphous selenium flat-panel systems.

PubMed

Bacher, Klaus; Smeets, Peter; Vereecken, Ludo; De Hauwere, An; Duyck, Philippe; De Man, Robert; Verstraete, Koenraad; Thierens, Hubert

2006-09-01

The aim of this study was to compare the image quality and radiation dose in chest imaging using an amorphous silicon flat-panel detector system and an amorphous selenium flat-panel detector system. In addition, the low-contrast performance of both systems with standard and low radiation doses was compared. In two groups of 100 patients each, digital chest radiographs were acquired with either an amorphous silicon or an amorphous selenium flat-panel system. The effective dose of the examination was measured using thermoluminescent dosimeters placed in an anthropomorphic Rando phantom. The image quality of the digital chest radiographs was assessed by five experienced radiologists using the European Guidelines on Quality Criteria for Diagnostic Radiographic Images. In addition, a contrast-detail phantom study was set up to assess the low-contrast performance of both systems at different radiation dose levels. Differences between the two groups were tested for significance using the two-tailed Mann-Whitney test. The amorphous silicon flat-panel system allowed an important and significant reduction in effective dose in comparison with the amorphous selenium flat-panel system (p < 0.0001) for both the posteroanterior and lateral views. In addition, clinical image quality analysis showed that the dose reduction was not detrimental to image quality. Compared with the amorphous selenium flat-panel detector system, the amorphous silicon flat-panel detector system performed significantly better in the low-contrast phantom study, with phantom entrance dose values of up to 135 muGy. Chest radiographs can be acquired with a significantly lower patient radiation dose using an amorphous silicon flat-panel system than using an amorphous selenium flat-panel system, thereby producing images that are equal or even superior in quality to those of the amorphous selenium flat-panel detector system.

Depressive symptoms and bodily pain: The role of physical disability and social stress

PubMed Central

Gayman, Mathew D.; Brown, Robyn Lewis; Cui, Ming

2010-01-01

Summary This study evaluates the bi-directional association between depressive symptoms and bodily pain, and examines the role of physical disability and perceived social stress in the depression—pain relationship. Data are employed from a two-wave panel study of Miami-Dade county residents (n = 1,459) that includes a substantial over-sampling of individuals who identify as physically-disabled. Findings indicate that the bi-directional relationship between depression and pain is similar for those with and without a physical disability. Results also demonstrate that stress exposure, specifically recent life events and daily discrimination, partially mediated the relationship between prior levels of depression and changes in pain. Directions for future research and the need for a more comprehensive model of health incorporating physical, psychological, and social factors are discussed. PMID:21359108

Use of an ultrasonic-acoustic technique for nondestructive evaluation of fiber composite strength

NASA Technical Reports Server (NTRS)

Vary, A.; Bowles, K. J.

1978-01-01

Details of the method used to measure the stress wave factor are described. Frequency spectra of the stress waves are analyzed in order to clarify the nature of the wave phenomena involved. The stress wave factor was measured with simple contact probes requiring only one-side access to a part. This is beneficial in nondestructive evaluations because the waves can run parallel to fiber directions and thus measure material properties in directions assumed by actual loads. The technique can be applied where conventional through transmission techniques are impractical or where more quantitative data are required. The stress wave factor was measured for a series of graphite/polyimide composite panels, and results obtained are compared with through transmission immersion ultrasonic scans.

Validation of general job satisfaction in the Korean Labor and Income Panel Study.

PubMed

Park, Shin Goo; Hwang, Sang Hee

2017-01-01

The purpose of this study is to assess the validity and reliability of general job satisfaction (JS) in the Korean Labor and Income Panel Study (KLIPS). We used the data from the 17th wave (2014) of the nationwide KLIPS, which selected a representative panel sample of Korean households and individuals aged 15 or older residing in urban areas. We included in this study 7679 employed subjects (4529 males and 3150 females). The general JS instrument consisted of five items rated on a scale from 1 (strongly disagree) to 5 (strongly agree). The general JS reliability was assessed using the corrected item-total correlation and Cronbach's alpha coefficient. The validity of general JS was assessed using confirmatory factor analysis (CFA) and Pearson's correlation. The corrected item-total correlations ranged from 0.736 to 0.837. Therefore, no items were removed. Cronbach's alpha for general JS was 0.925, indicating excellent internal consistency. The CFA of the general JS model showed a good fit. Pearson's correlation coefficients for convergent validity showed moderate or strong correlations. The results obtained in our study confirm the validity and reliability of general JS.

Gene expression in the rat cerebral cortex: comparison of recovery sleep and hypnotic-induced sleep.

PubMed

Wisor, J P; Morairty, S R; Huynh, N T; Steininger, T L; Kilduff, T S

2006-08-11

Most hypnotic medications currently on the market target some aspect of GABAergic neurotransmission. Although all such compounds increase sleep, these drugs differentially affect the activity of the cerebral cortex as measured by the electroencephalogram. Whereas benzodiazepine medications such as triazolam tend to suppress slow wave activity in the cortex, the GABA(B) ligand gamma-hydroxybutyrate greatly enhances slow wave activity and the non-benzodiazepine, zolpidem, which binds to the omega1 site on the GABA(A) receptor/Cl(-) ionophore complex, is intermediate in this regard. Our previous studies have demonstrated that a small number of genes exhibit increased expression in the cerebral cortex of the mouse and rat during recovery sleep after sleep deprivation: egr-3, fra-2, grp78, grp94, ngfi-b, and nr4a3. Using these genes as a panel of biomarkers associated with sleep, we asked whether hypnotic medications induce similar molecular changes in the rat cerebral cortex to those observed when both sleep continuity and slow wave activity are enhanced during recovery sleep. We find that, although each drug increases the expression of a subset of genes in the panel of biomarkers, no drug fully replicates the molecular changes in the cortex associated with recovery sleep. Furthermore, high levels of slow wave activity in the cortex are correlated with increased expression of fra-2 whereas the expression of grp94 is correlated with body temperature. These results demonstrate that sleep-related changes in gene expression may be affected by physiological covariates of sleep and wakefulness rather than by vigilance state per se.

75 FR 1589 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-12

... Census Coverage Measurement Recall Bias Panel Study has been added. Two previous notices were published... Reinterview, and Recall Bias Panel Study. OMB Control Number: None. Form Number(s): All data will be collected... different PI enumerator. In addition to the CCM PI Operation, CCM will conduct a Recall Bias Panel Study...

Spitzer Observes Neutron Star Collision

NASA Image and Video Library

2017-10-16

NASA's Spitzer Space Telescope has provisionally detected the faint afterglow of the explosive merger of two neutron stars in the galaxy NGC 4993. The event, labeled GW170817, was initially detected in gravitational waves and gamma rays. Subsequent observations by dozens of telescopes have monitored its afterglow across the entire spectrum of light. The event is located about 130 million light-years from Earth. Spitzer's observation on September 29, 2017, came late in the game, just over 6 weeks after the event was first seen. But if this weak detection is verified, it will play an important role in helping astronomers understand how many of the heaviest elements in the periodic table are created in explosive neutron star mergers. The left panel is a color composite of the 3.6 and 4.5 micron channels of the Spitzer IRAC instrument, rendered in cyan and red. The center panel is a median-filtered color composite showing a faint red dot at the known location of the event. The right panel shows the residual 4.5 micron data after subtracting out the light of the galaxy using an archival image that predates the event. An annotated version is at https://photojournal.jpl.nasa.gov/catalog/PIA21910

Moving Out: Transition to Non-Residence among Resident Fathers in the United States, 1968-1997

ERIC Educational Resources Information Center

Gupta, Sanjiv; Smock, Pamela J.; Manning, Wendy D.

2004-01-01

This article provides the first individual-level estimates of the change over time in the probability of non-residence for initially resident fathers in the United States. Drawing on the 1968-1997 waves of the Panel Study of Income Dynamics, we used discrete-time event history models to compute the probabilities of non-residence for six 5-year…

The interaction between the DRD4 VNTR polymorphism and perceived peer drinking norms in adolescent alcohol use and misuse

PubMed Central

Park, Aesoon; Kim, Jueun; Zaso, Michelle J.; Glatt, Stephen J.; Sher, Kenneth J.; Scott-Sheldon, Lori A. J.; Eckert, Tanya L.; Vanable, Peter A.; Carey, Kate B.; Ewart, Craig K.; Carey, Michael P.

2015-01-01

Peer drinking norms are arguably one of the strongest correlates of adolescent drinking. Prospective studies indicate that adolescents tend to select peers based on drinking (peer-selection) and their peers’ drinking is associated with changes in adolescent drinking over time (peer socialization). The present study investigated whether the peer selection and socialization processes in adolescent drinking differed as a function of the DRD4 VNTR genotype in two independent prospective datasets. The first sample was 174 high school students drawn from a 2-wave 6-month prospective study. The second sample was 237 college students drawn from a 3-wave annual prospective study. Multigroup cross-lagged panel analyses of the high school student sample indicated stronger socialization via peer drinking norms among carriers, whereas analyses of the college student sample indicated stronger drinking-based peer selection in the junior year among carriers, compared to non-carriers. Although replication and meta-analytic synthesis are needed, these findings suggest in part genetically determined peer-selection (carriers of the DRD4 7-repeat allele tend to associate with peers who have more favorable attitudes toward drinking and greater alcohol use) and peer socialization (carriers’ subsequent drinking behaviors are more strongly associated with their peer drinking norms) may differ across adolescent developmental stages. PMID:26902782

Geometric and boundary element method simulations of acoustic reflections from rough, finite, or non-planar surfaces

NASA Astrophysics Data System (ADS)

Rathsam, Jonathan

This dissertation seeks to advance the current state of computer-based sound field simulations for room acoustics. The first part of the dissertation assesses the reliability of geometric sound-field simulations, which are approximate in nature. The second part of the dissertation uses the rigorous boundary element method (BEM) to learn more about reflections from finite reflectors: planar and non-planar. Acoustical designers commonly use geometric simulations to predict sound fields quickly. Geometric simulation of reflections from rough surfaces is still under refinement. The first project in this dissertation investigates the scattering coefficient, which quantifies the degree of diffuse reflection from rough surfaces. The main result is that predicted reverberation time varies inversely with scattering coefficient if the sound field is nondiffuse. Additional results include a flow chart that enables acoustical designers to gauge how sensitive predicted results are to their choice of scattering coefficient. Geometric acoustics is a high-frequency approximation to wave acoustics. At low frequencies, more pronounced wave phenomena cause deviations between real-world values and geometric predictions. Acoustical designers encounter the limits of geometric acoustics in particular when simulating the low frequency response from finite suspended reflector panels. This dissertation uses the rigorous BEM to develop an improved low-frequency radiation model for smooth, finite reflectors. The improved low frequency model is suggested in two forms for implementation in geometric models. Although BEM simulations require more computation time than geometric simulations, BEM results are highly accurate. The final section of this dissertation uses the BEM to investigate the sound field around non-planar reflectors. The author has added convex edges rounded away from the source side of finite, smooth reflectors to minimize coloration of reflections caused by interference from boundary waves. Although the coloration could not be fully eliminated, the convex edge increases the sound energy reflected into previously nonspecular zones. This excess reflected energy is marginally audible using a standard of 20 dB below direct sound energy. The convex-edged panel is recommended for use when designers want to extend reflected energy spatially beyond the specular reflection zone of a planar panel.

The Effects of Pathological Gaming on Aggressive Behavior

PubMed Central

Valkenburg, Patti M.; Peter, Jochen

2010-01-01

Studies have shown that pathological involvement with computer or video games is related to excessive gaming binges and aggressive behavior. Our aims for this study were to longitudinally examine if pathological gaming leads to increasingly excessive gaming habits, and how pathological gaming may cause an increase in physical aggression. For this purpose, we conducted a two-wave panel study among 851 Dutch adolescents (49% female) of which 540 played games (30% female). Our analyses indicated that higher levels of pathological gaming predicted an increase in time spent playing games 6 months later. Time spent playing violent games specifically, and not just games per se, increased physical aggression. Furthermore, higher levels of pathological gaming, regardless of violent content, predicted an increase in physical aggression among boys. That this effect only applies to boys does not diminish its importance, because adolescent boys are generally the heaviest players of violent games and most susceptible to pathological involvement. PMID:20549320

The effects of pathological gaming on aggressive behavior.

PubMed

Lemmens, Jeroen S; Valkenburg, Patti M; Peter, Jochen

2011-01-01

Studies have shown that pathological involvement with computer or video games is related to excessive gaming binges and aggressive behavior. Our aims for this study were to longitudinally examine if pathological gaming leads to increasingly excessive gaming habits, and how pathological gaming may cause an increase in physical aggression. For this purpose, we conducted a two-wave panel study among 851 Dutch adolescents (49% female) of which 540 played games (30% female). Our analyses indicated that higher levels of pathological gaming predicted an increase in time spent playing games 6 months later. Time spent playing violent games specifically, and not just games per se, increased physical aggression. Furthermore, higher levels of pathological gaming, regardless of violent content, predicted an increase in physical aggression among boys. That this effect only applies to boys does not diminish its importance, because adolescent boys are generally the heaviest players of violent games and most susceptible to pathological involvement.

Illumination of dense urban areas by light redirecting panels.

PubMed

El-Henawy, Sally I; Mohamed, Mohamed W N; Mashaly, Islam A; Mohamed, Osama N; Galal, Ola; Taha, Iman; Nassar, Khaled; Safwat, Amr M E

2014-05-05

With the high population growth rate, especially in developing countries, and the scarcity of land resources, buildings are becoming so close to each other, depriving the lower floors and the alleys from sunlight and consequently causing health problems. Therefore, there is an urgent need for cost-effective efficient light redirecting panels that guide sun rays into those dim places. In this paper, we address this problem. A novel sine wave based panel is presented to redirect/diverge light downward and enhance the illumination level in those dark places. Simulation results show that the proposed panel improves the illuminance values by more than 200% and 400% in autumn and winter respectively, operates over wide solar altitude ranges, and redirects light efficiently. Experimental and simulation results are in good agreement.

Intra- and Inter-Individual Variability in Location Data for Two U.S. Health-Compromised Elderly Cohorts

EPA Science Inventory

This study provides descriptive statistical data on daily time spent in three locations of exposure assessment interest for two panel studies of health-compromised elderly individuals > 65 y old having multi-days of human activity data. The panel studies include individuals livi...

Active control of turbulent boundary layer-induced sound transmission through the cavity-backed double panels

NASA Astrophysics Data System (ADS)

Caiazzo, A.; Alujević, N.; Pluymers, B.; Desmet, W.

2018-05-01

This paper presents a theoretical study of active control of turbulent boundary layer (TBL) induced sound transmission through the cavity-backed double panels. The aerodynamic model used is based on the Corcos wall pressure distribution. The structural-acoustic model encompasses a source panel (skin panel), coupled through an acoustic cavity to the radiating panel (trim panel). The radiating panel is backed by a larger acoustic enclosure (the back cavity). A feedback control unit is located inside the acoustic cavity between the two panels. It consists of a control force actuator and a sensor mounted at the actuator footprint on the radiating panel. The control actuator can react off the source panel. It is driven by an amplified velocity signal measured by the sensor. A fully coupled analytical structural-acoustic model is developed to study the effects of the active control on the sound transmission into the back cavity. The stability and performance of the active control system are firstly studied on a reduced order model. In the reduced order model only two fundamental modes of the fully coupled system are assumed. Secondly, a full order model is considered with a number of modes large enough to yield accurate simulation results up to 1000 Hz. It is shown that convincing reductions of the TBL-induced vibrations of the radiating panel and the sound pressure inside the back cavity can be expected. The reductions are more pronounced for a certain class of systems, which is characterised by the fundamental natural frequency of the skin panel larger than the fundamental natural frequency of the trim panel.

Convective and global stability analysis of a Mach 5.8 boundary layer grazing a compliant surface

NASA Astrophysics Data System (ADS)

Dettenrieder, Fabian; Bodony, Daniel

2016-11-01

Boundary layer transition on high-speed vehicles is expected to be affected by unsteady surface compliance. The stability properties of a Mach 5.8 zero-pressure-gradient laminar boundary layer grazing a nominally-flat thermo-mechanically compliant panel is considered. The linearized compressible Navier-Stokes equations describe small amplitude disturbances in the fluid while the panel deformations are described by the Kirchhoff-Love plate equation and its thermal state by the transient heat equation. Compatibility conditions that couple disturbances in the fluid to those in the solid yield simple algebraic and robin boundary conditions for the velocity and thermal states, respectively. A local convective stability analysis shows that the panel can modify both the first and second Mack modes when, for metallic-like panels, the panel thickness exceeds the lengthscale δ99 Rex- 0 . 5 . A global stability analysis, which permits finite panel lengths with clamped-clamped boundary conditions, shows a rich eigenvalue spectrum with several branches. Unstable modes are found with streamwise-growing panel deformations leading to Mach wave-type radiation. Stable global modes are also found and have distinctly different panel modes but similar radiation patterns. Air Force Office of Scientific Research.

78 FR 7434 - Medicare Program: Notice of Two Membership Appointments to the Advisory Panel on Hospital...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-01

... Panel on Hospital Outpatient Payment (HOP, the Panel). The two new appointments to the Panel will each... Classification groups and weights. The Advisory Panel on Hospital Outpatient Payment (HOP, the Panel) is governed... members to the Advisory Panel on Hospital Outpatient Payment (HOP, the Panel) to fill two vacancies on the...

Oriented-strand-board- the wave of the future- for the building trade

Treesearch

Linda Ashton

1984-01-01

Move over, plywood. Oriented-strand board is here. It's less expensive. It's as durable. It has as many uses. And it is the wave of the future. "Oriented-strand board is a direct substitute for plywood" said Jerry Buckner, plant manager for the Martco oriented-strand board plant in Lemoyen. OSB, as it is commonly called, is a structural panel made...

Religion and Sexual Identity Fluidity in a National Three-Wave Panel of U.S. Adults.

PubMed

Scheitle, Christopher P; Wolf, Julia Kay

2018-05-01

Research has shown that cross-sectional estimates of sexual identities overlook fluidity in those identities. Research has also shown that social factors, such as competing identities, can influence sexual identity fluidity. We contributed to this literature in two ways. First, we utilized a representative panel of US adults (N = 1034) surveyed in 2010, 2012, and 2014 by the General Social Survey. The addition of a third observation allowed us to examine more complexity in sexual identity fluidity. We found that 2.40% of US adults reported at least one change in sexual identity across the 4 years, with 1.59% reporting one change and 0.81% reporting two changes. Our second contribution came from examining the role of religion, as past research has suggested that religion can destabilize and prolong sexual identity development. We found that lesbian or gay individuals (N = 17), bisexuals (N = 15), and females (N = 585) showed more sexual identity fluidity compared to heterosexuals (N = 1003) and males (N = 450), respectively. Marital status, age, race, and education did not have significant associations with sexual identity fluidity. Regarding the role of religion, we found that participants identifying as more religious in Wave 1 showed more fluidity in sexual identity across later observations. Further analysis showed that higher levels of religiosity make it more likely that lesbian or gay individuals will be fluid in sexual identity, but this is not the case for heterosexual individuals. This finding reinforces past qualitative research that has suggested that religion can extend or complicate sexual minorities' identity development.

Theoretical investigation of flutter of two-dimensional flat panels with one surface exposed to supersonic potential flow

NASA Technical Reports Server (NTRS)

Nelson, Herbert C; Cunningham, Herbert J

1956-01-01

A Rayleigh type analysis involving chosen modes of the panel as degrees of freedom is used to treat the flutter of a two-dimensional flat panel supported at its leading and trailing edges and subjected to a middle-plane tensile force. The panel has a supersonic stream passing over its upper surface and still air below. The aerodynamic forces due to the supersonic stream are obtained from the theory for linearized two-dimensional unsteady flow and the forces due to the still air are obtained from acoustical theory. In order to study the effect of increasing the number of modes in the analysis, two and then four modes are employed. The modes used are the first four natural modes of the panel in a vacuum with no tensile force acting. The analysis includes these variables: Mach number, structural damping, tensile force, density of the still air, and edge fixity (clamped and pinned). For certain combinations of these variables, stability boundaries are obtained which can be used to determine the panel thickness required to prevent flutter for any panel material and altitude.

Assessing Incentives for Service-Level Selection In Private Health Insurance Exchanges

PubMed Central

McGuire, Thomas G.; Newhouse, Joseph P.; Normand, Sharon-Lise; Shi, Julie; Zuvekas, Samuel

2014-01-01

Even with open enrollment and mandated purchase, incentives created by adverse selection may undermine the efficiency of service offerings by plans in the new health insurance Exchanges created by the Affordable Care Act. Using data on persons likely to participate in Exchanges drawn from five waves of the Medical Expenditure Panel Survey, we measure plan incentives in two ways. First, we construct predictive ratios, improving on current methods by taking into account the role of premiums in financing plans. Second, relying on an explicit model of plan profit maximization, we measure incentives based on the predictability and predictiveness of various medical diagnoses. Among the chronic diseases studied, plans have the greatest incentive to skimp on care for cancer, and mental health and substance abuse. PMID:24603443

The direct field boundary impedance of two-dimensional periodic structures with application to high frequency vibration prediction.

PubMed

Langley, Robin S; Cotoni, Vincent

2010-04-01

Large sections of many types of engineering construction can be considered to constitute a two-dimensional periodic structure, with examples ranging from an orthogonally stiffened shell to a honeycomb sandwich panel. In this paper, a method is presented for computing the boundary (or edge) impedance of a semi-infinite two-dimensional periodic structure, a quantity which is referred to as the direct field boundary impedance matrix. This terminology arises from the fact that none of the waves generated at the boundary (the direct field) are reflected back to the boundary in a semi-infinite system. The direct field impedance matrix can be used to calculate elastic wave transmission coefficients, and also to calculate the coupling loss factors (CLFs), which are required by the statistical energy analysis (SEA) approach to predicting high frequency vibration levels in built-up systems. The calculation of the relevant CLFs enables a two-dimensional periodic region of a structure to be modeled very efficiently as a single subsystem within SEA, and also within related methods, such as a recently developed hybrid approach, which couples the finite element method with SEA. The analysis is illustrated by various numerical examples involving stiffened plate structures.

Tunable bandgaps in a deployable metamaterial

NASA Astrophysics Data System (ADS)

Nanda, Aditya; Karami, M. Amin

2018-03-01

In this manuscript, we envision deployable structures (such as solar arrays) and origami-inspired foldable structures as metamaterials capable of tunable wave manipulation. Specifically, we present a metamaterial whose bandgaps can be modulated by changing the fold angle of adjacent panels. The repeating unit cell of the structure consists of a beam (representing a panel) and a torsional spring (representing the folding mechanism). Two important cases are considered. Firstly, the fold angle (angle between adjacent beams), Ψ, is zero and only flexural waves propagate. In the second case, the fold angle is greater than zero (Ψ > 0). This causes longitudinal and transverse vibration to be coupled. FEM models are used to validate both these analyses. Increasing the fold angle was found to inflict profound changes to the wave transmission characteristics of the structure. In general, increasing the fold angles caused the bandwidth of bandgaps to increase significantly. For the lowest four bandgaps we found bandwidth increases of 252 %, 177 %, 230 % and 163 % respectively at Ψ = 90 deg (relative to the bandwidths at Ψ = 0). In addition, significant increase in bandwidth of the odd-numbered bandgaps occurs even at small fold angles- the bandwidth for the first and third bandgaps effectively double in size (increase by 100%) at Ψ = 20 deg relative to those at Ψ = 0. This has important ramifications in the context of tunable wave manipulation and adaptive filtering. In addition, by expanding out the characteristic equation of transfer matrix for the straight structure, we prove that the upper band edge of the nth bandgap will always equal the nth simply supported natural frequency of the constituent beam. Further, we found that the ratio (EI/kt) is an important parameter affecting the bandwidth of bandgaps. For low values of the ratio, effectively, no bandgap exists. For higher values of the ratio (EI/kt), we obtain a relatively large bandgap over which no waves propagate. This can have important ramifications for the design of foldable structures. As an alternative to impedance-based structural health monitoring, these insights can aid in health monitoring of deployable structures by tracking the bandwidth of bandgaps which can provide important clues about the mechanical parameters of the structure.

Tunable bandgaps in a deployable metamaterial

NASA Astrophysics Data System (ADS)

Nanda, Aditya; Karami, M. A.

2018-06-01

In this manuscript, we investigate deployable structures (such as solar arrays) and origami-inspired foldable structures as metamaterials capable of tunable wave manipulation. Specifically, we present a metamaterial whose bandgaps can be modulated by changing the fold angle of adjacent panels. The repeating unit cell of the structure consists of a beam (representing a panel) and a torsional spring (representing the folding mechanism). Two important cases are considered. Firstly, the fold angle (angle between adjacent beams), Ψ, is zero and only flexural waves propagate. In the second case, the fold angle is greater than zero (Ψ > 0). This causes longitudinal and transverse vibration to be coupled. FEM models are used to validate both these analyses. Increasing the fold angle was found to inflict notable changes to the wave transmission characteristics of the structure. In general, increasing the fold angles caused the bandwidth of bandgaps to increase. For the lowest four bandgaps we found bandwidth increases of 252 %, 177 %, 230 % and 163 % respectively at Ψ = 90 deg (relative to the bandwidths at Ψ = 0). In addition, non-trivial increases in bandwidth of the odd-numbered bandgaps occurs even at small fold angles-the bandwidth for the first and third bandgaps effectively double in size (increase by 100 %) at Ψ = 20 deg relative to those at Ψ = 0. This could have ramifications in the context of tunable wave manipulation and adaptive filtering. In addition, by expanding out the characteristic equation of transfer matrix for the straight structure, we prove that the upper band edge of the nth bandgap will always equal the nth simply supported natural frequency of the constituent beam. Further, we found that the ratio (EI/kt) is a pertinent parameter affecting the bandwidth of bandgaps. For low values of the ratio, effectively, no bandgap exists. For higher values of the ratio (EI/kt), we obtain a relatively large bandgap over which no waves propagate. This can have ramifications for the design of foldable structures. As an alternative to impedance-based structural health monitoring, these insights can aid in health monitoring of deployable structures by tracking the bandwidth of bandgaps which can provide clues about the mechanical parameters of the structure.

Protection of the lung from blast overpressure by stress wave decouplers, buffer plates or sandwich panels.

PubMed

Sedman, Andrew; Hepper, A

2018-03-19

This paper outlines aspects of UK Ministry of Defence's research and development of blast overpressure protection technologies appropriate for use in body armour, with the aim of both propagating new knowledge and updating existing information. Two simple models are introduced not only to focus the description of the mechanism by which the lungs can be protected, but also to provide a bridge between fields of research that may hold the key to further advances in protection technology and related body armour. Protection can be provided to the lungs by decoupling the stress wave transmission into the thorax by managing the blast energy imparted through the protection system. It is proposed that the utility of the existing 'simple decoupler' blast overpressure protection is reviewed in light of recent developments in the treatment of those sustaining both overpressure and fragment injuries. It is anticipated that further advances in protection technology may be generated by those working in other fields on the analogous technologies of 'buffer plates' and 'sandwich panels'. © Crown copyright (2018), Dstl. This material is licensed under the terms of the Open Government Licence except where otherwise stated. To view this licence, visit http://www.nationalarchives.gov.uk/doc/open-government-licence/version/3 or write to the Information Policy Team, The National Archives, Kew, London TW9 4DU, or email: psi@nationalarchives.gsi.gov.uk.

Applications of optical holography to applied mechanics.

NASA Technical Reports Server (NTRS)

Aprahamian, R.

1972-01-01

This paper provides a brief summary of applications of optical holography and holographic interferometry to applied solid mechanics. Basic equations commonly used in fringe interpretation are described and used to reduce the data contained on holographic interferograms. A comparison of data obtained holographically with analytical prediction is given wherever possible. Applications contained herein include front surface physics, study of bomb breakup, transverse wave propagation, study of mode shapes of panels at elevated temperatures, nondestructive testing, and vibration analysis.

Estimating Causal Effects With Propensity Score Models: An Evaluation of the Touch Condom Media Campaign in Pakistan.

PubMed

Beaudoin, Christopher E; Chen, Hongliang; Agha, Sohail

2016-01-01

Rapid population growth in Pakistan poses major risks, including those pertinent to public health. In the context of family planning in Pakistan, the current study evaluates the Touch condom media campaign and its effects on condom-related awareness, attitudes, behavioral intention, and behavior. This evaluation relies on 3 waves of panel survey data from men married to women ages 15-49 living in urban and rural areas in Pakistan (N = 1,012): Wave 1 was March 15 to April 7, 2009; Wave 2 was August 10 to August 24, 2009; and Wave 3 was May 1 to June 13, 2010. Analysis of variance provided evidence of improvements in 10 of 11 condom-related outcomes from Wave 1 to Wave 2 and Wave 3. In addition, there was no evidence of outcome decay 1 year after the conclusion of campaign advertising dissemination. To help compensate for violating the assumption of random assignment, propensity score modeling offered evidence of the beneficial effects of confirmed Touch ad recall on each of the 11 outcomes in at least 1 of 3 time-lagged scenarios. By using these different time-lagged scenarios (i.e., from Wave 1 to Wave 2, from Wave 1 to Wave 3, and from Wave 2 to Wave 3), propensity score modeling permitted insights into how the campaign had time-variant effects on the different types of condom-related outcomes, including carryover effects of the media campaign.

How friends’ involvement in crime affects the risk of offending and victimization

PubMed Central

Rokven, Josja J; de Boer, Gijs; Tolsma, Jochem; Ruiter, Stijn

2016-01-01

This article examines how friends’ involvement in crime influences such involvement in those around them, as offenders or victims, and the extent to which such friendship effects vary with contact frequency, friendship intimacy, and geographical proximity. To test our hypotheses we used four waves from the Dutch panel survey CrimeNL, which includes ego-centered network measures in each wave for respondents aged between 16 and 45. To test our hypotheses, fixed-effects panel models were employed. The results show that living in close proximity to delinquent friends increases people’s own risk of offending, and daily interaction with these friends decreases the risk of victimization. Victimization is also communicated among friends in their daily interactions. These findings stress the need to consider factors that condition how friendships exert influence on the risk of crime involvement. PMID:29187805

A Study of Coronal-Interplanetary Coupling Mechanisms

DTIC Science & Technology

1991-04-30

Magnetic Feild in Astrophys. J., Vol. 344, 478-493, 1989. 111.3. Reflection and Trapping of Transient Alfven Waves Propagating in an Isothermal...1990. VI.4. A Comparison Between Progressive Extension Method (PEM) and Iterative Method (IM) for Magnetic Feild Extrapolations in the Solar...Flight Center. Representative results are shown in the upper left panel of Figure 1 in which (a) shows the observed vector magnetic field at photospheric

Dispersion of Lamb waves in a honeycomb composite sandwich panel.

PubMed

Baid, Harsh; Schaal, Christoph; Samajder, Himadri; Mal, Ajit

2015-02-01

Composite materials are increasingly being used in advanced aircraft and aerospace structures. Despite their many advantages, composites are often susceptible to hidden damages that may occur during manufacturing and/or service of the structure. Therefore, safe operation of composite structures requires careful monitoring of the initiation and growth of such defects. Ultrasonic methods using guided waves offer a reliable and cost effective method for defects monitoring in advanced structures due to their long propagation range and their sensitivity to defects in their propagation path. In this paper, some of the useful properties of guided Lamb type waves are investigated, using analytical, numerical and experimental methods, in an effort to provide the knowledge base required for the development of viable structural health monitoring systems for composite structures. The laboratory experiments involve a pitch-catch method in which a pair of movable transducers is placed on the outside surface of the structure for generating and recording the wave signals. The specific cases considered include an aluminum plate, a woven composite laminate and an aluminum honeycomb sandwich panel. The agreement between experimental, numerical and theoretical results are shown to be excellent in certain frequency ranges, providing a guidance for the design of effective inspection systems. Copyright © 2014 Elsevier B.V. All rights reserved.

PLATE WAVE RESONANCE WITH AIR-COUPLED ULTRASONICS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bar, H. N.; Dayal, V.; Barnard, D.

2010-02-22

Air-coupled ultrasonic transducers can excite plate waves in metals and composites. The coincidence effect, i.e., the wave vector of plate wave coincides with projection of exciting airborne sound vector, leads to a resonance which strongly amplifies the sound transmission through the plate. The resonance depends on the angle of incidence and the frequency. In the present study, the incidence angle for maximum transmission (theta{sub max}) is measured in plates of steel, aluminum, carbon fiber reinforced composites and honeycomb sandwich panels. The variations of (theta{sub max}) with plate thickness are compared with theoretical values in steel, aluminum and quasi-isotropic carbon fibermore » composites. The enhanced transmission of air-coupled ultrasound at oblique incidence can substantially improve the probability of flaw detection in plates and especially in honeycomb structures. Experimental air-coupled ultrasonic scan of subtle flaws in CFRP laminates showed definite improvement of signal-to-noise ratio with oblique incidence at theta{sub max}.« less

Aerothermal and aeroelastic response prediction of aerospace structures in high-speed flows using direct numerical simulation

NASA Astrophysics Data System (ADS)

Ostoich, Christopher Mark

Future high-speed air vehicles will be lightweight, flexible, and reusable. Ve- hicles fitting this description are subject to severe thermal and fluid dynamic loading from multiple sources such as aerothermal heating, propulsion sys- tem exhaust, and high dynamic pressures. The combination of low-margin design requirements and extreme environmental conditions emphasizes the occurrence of fluid-thermal-structural coupling. Numerous attempts to field such vehicles have been unsuccessful over the past half-century due par- tially to the inability of traditional design and analysis practices to predict the structural response in this flight regime. In this thesis, a high-fidelity computational approach is used to examine the fluid-structural response of aerospace structures in high-speed flows. The method is applied to two cases: one involving a fluid-thermal interaction problem in a hypersonic flow and the other a fluid-structure interaction study involving a turbulent boundary layer and a compliant panel. The coupled fluid-thermal investigation features a nominally rigid alu- minum spherical dome fixed to a ceramic panel holder placed in a Mach 6.59 laminar boundary layer. The problem was originally studied by Glass and Hunt in a 1988 wind tunnel experiment in the NASA Langley 8-Foot High Temperature Tunnel and is motivated by thermally bowed body panels designed for the National Aerospace Plane. In this work, the compressible Navier-Stokes equations for a thermally perfect gas and the transient heat equation in the structure are solved simultaneously using two high-fidelity solvers coupled at the solid-fluid interface. Predicted surface heat fluxes are within 10% of the measured values in the dome interior with greater differ- ences found near the dome edges where uncertainties concerning the exper- imental model's construction likely influence the thermal dynamics. On the flat panel holder, the local surface heat fluxes approach those on the wind- ward dome face due to a dome-induced horseshoe vortex scouring the panel's surface. Comparisons with reduced-order models of heat transfer indicate that they perform with varying levels of accuracy around some portions of the geometry while completely failing to predict significant heat loads in re- gions where the dome-influenced flow impacts the ceramic panel. Cumulative effects of flow-thermal coupling at later simulation times on the reduction of panel drag and surface heat transfer are quantified. The second fluid-structure study investigates the interaction between a thin metallic panel and a Mach 2.25 turbulent boundary layer with an ini- tial momentum thickness Reynolds number of 1200. A transient, non-linear, large deformation, 3D finite element solver is developed to compute the dynamic response of the panel. The solver is coupled at the fluid-structure interface with the compressible Navier-Stokes solver, the latter of which is used for a direct numerical simulation of the turbulent boundary layer. In this approach, no simplifying assumptions regarding the structural solution or turbulence modeling are made in order to get detailed solution data. It is found that the thin panel state evolves into a flutter type response char- acterized by high-amplitude, high-frequency oscillations into the flow. The oscillating panel disturbs the supersonic flow by introducing compression waves, modifying the turbulence, and generating fluctuations in the power exiting the top of the flow domain. The work in this thesis serves as a step forward in structural response prediction in high-speed flows. The results demonstrate the ability of high- fidelity numerical approaches to serve as a guide for reduced-order model improvement and as well as provide accurate and detailed solution data in scenarios where experimental approaches are difficult or impossible.

Brine and Gas Flow Patterns Between Excavated Areas and Disturbed Rock Zone in the 1996 Performance Assessment for the Waste Isolation Pilot Plant for a Single Drilling Intrusion that Penetrates Repository and Castile Brine Reservoir

DOE Office of Scientific and Technical Information (OSTI.GOV)

ECONOMY,KATHLEEN M.; HELTON,JON CRAIG; VAUGHN,PALMER

1999-10-01

The Waste Isolation Pilot Plant (WIPP), which is located in southeastern New Mexico, is being developed for the geologic disposal of transuranic (TRU) waste by the U.S. Department of Energy (DOE). Waste disposal will take place in panels excavated in a bedded salt formation approximately 2000 ft (610 m) below the land surface. The BRAGFLO computer program which solves a system of nonlinear partial differential equations for two-phase flow, was used to investigate brine and gas flow patterns in the vicinity of the repository for the 1996 WIPP performance assessment (PA). The present study examines the implications of modeling assumptionsmore » used in conjunction with BRAGFLO in the 1996 WIPP PA that affect brine and gas flow patterns involving two waste regions in the repository (i.e., a single waste panel and the remaining nine waste panels), a disturbed rock zone (DRZ) that lies just above and below these two regions, and a borehole that penetrates the single waste panel and a brine pocket below this panel. The two waste regions are separated by a panel closure. The following insights were obtained from this study. First, the impediment to flow between the two waste regions provided by the panel closure model is reduced due to the permeable and areally extensive nature of the DRZ adopted in the 1996 WIPP PA, which results in the DRZ becoming an effective pathway for gas and brine movement around the panel closures and thus between the two waste regions. Brine and gas flow between the two waste regions via the DRZ causes pressures between the two to equilibrate rapidly, with the result that processes in the intruded waste panel are not isolated from the rest of the repository. Second, the connection between intruded and unintruded waste panels provided by the DRZ increases the time required for repository pressures to equilibrate with the overlying and/or underlying units subsequent to a drilling intrusion. Third, the large and areally extensive DRZ void volumes is a significant source of brine to the repository, which is consumed in the corrosion of iron and thus contributes to increased repository pressures. Fourth, the DRZ itself lowers repository pressures by providing storage for gas and access to additional gas storage in areas of the repository. Fifth, given the pathway that the DRZ provides for gas and brine to flow around the panel closures, isolation of the waste panels by the panel closures was not essential to compliance with the U.S. Environment Protection Agency's regulations in the 1996 WIPP PA.« less

Exploring changes in nursing students' attitudes towards the use of technology: A four-wave longitudinal panel study.

PubMed

Tubaishat, Ahmad; Aljezawi, Ma'en; Al-Rawajfah, Omar M; Habiballah, Laila; Akhu-Zaheya, Laila M

2016-03-01

It is essential for nursing students to be equipped with the necessary technology skills throughout and after their study period. Their acceptance of this technology depends largely on their attitudes towards technology. To explore the evolution in nursing students' attitudes towards technology, and to determine whether there was a change in participants' formal education in technology over their four years of study. A longitudinal panel study was conducted in a single school of nursing in Jordan. A total of 140 students were followed over their four years of undergraduate study. They completed the same tool (the Technology Attitude Scale) each year, to capture any changes in their attitudes towards technology across the years. In all four waves of data collection, students showed positive attitudes towards technology, with the highest attitude scores being in their final year (M=6.19, SD=0.72). As the students spent more time on their nursing education, they were found to have a more positive attitude. Thus, a strong positive relationship existed between this formal education in technology and attitudes: as the students' education in technology increased, their attitudes were more positive. A remarkable development in students' attitudes towards technology is reported in this study. The positive attitudes displayed by the students should be enhanced by providing technology-related subjects during their studies in nursing schools at a very early stage. Copyright © 2015 Elsevier Ltd. All rights reserved.

Acoustic noise and pneumatic wave vortices energy harvesting on highways

NASA Astrophysics Data System (ADS)

Pogacian, S.; Bot, A.; Zotoiu, D.

2012-02-01

This paper is aimed to present the structure and the principle of a energy harvesting system that uses the air movement emanated from passing traffic to produce and accumulate electrical energy. Each of the system's elements consists of a inertial mass panel which oscillate when driving cars pass. The panel is attached to a linear electromagnetic mini generator (or/and some piezo electric micro generators) and at the time of passing, it produces energy which is store it in a supercapacitor or in a rechargeable battery. The concept can be applied to busy roads, and to high-frequented rail networks and it can work with street and road lighting, information panels and monitoring devices.

Does job complexity mitigate the negative effect of emotion-rule dissonance on employee burnout?

PubMed Central

Kubicek, Bettina; Korunka, Christian

2015-01-01

ABSTRACT In interactions with clients or patients, human service workers are at risk of experiencing discrepancies between felt and organizationally mandated emotions (i.e. emotion-rule dissonance). Given the documented detrimental effects of such discrepancies on employee strain, the present study investigated whether job complexity mitigates the relation between emotion-rule dissonance and employee burnout using data from a two-wave panel study of eldercare workers (N = 583, 16-month time lag). Structural equation modelling revealed that emotion-rule dissonance at Time 1 preceded emotional exhaustion and depersonalization at Time 2. Beyond that, employees whose work offered job complexity were found to suffer less from emotional exhaustion and depersonalization when encountering discrepancies between felt and stipulated emotions compared to employees who conducted noncomplex work. Thus, designing complex tasks appears to be a crucial starting point for alleviating employee burnout in jobs that provoke emotion-rule dissonance. PMID:26681818

Religiosity, Crime, and Drug Use Among Juvenile Offenders: A Test of Reciprocal Relationships Over Time.

PubMed

Jang, Sung Joon

2018-05-01

This article examines whether an individual's religiosity has reciprocal relationships with crime and drug use among juvenile offenders. Structural equation modeling is applied to analyze 11-wave panel data from a study of juveniles adjudicated or found guilty of a serious offense in two states. Offenders' religiosity is measured both objectively (participation in religious activities) and subjectively (religious salience, experiences, and efficacy). While holding constant an offender's exposure time (the proportion of time on the street), previous levels of crime and drug use, and sociodemographic controls, this study found the relationship between religiosity and crime (i.e., nondrug offending) to be either bidirectional or unidirectional. The relationship between religiosity and drug use (binge drinking, marijuana use, and hard drug use) is, however, unidirectional over time. When unidirectional relationship is found, it is religiosity that decreases crime and drug use, not the other way around. Implications of findings are discussed.

Imaging ultrasonic dispersive guided wave energy in long bones using linear radon transform.

PubMed

Tran, Tho N H T; Nguyen, Kim-Cuong T; Sacchi, Mauricio D; Le, Lawrence H

2014-11-01

Multichannel analysis of dispersive ultrasonic energy requires a reliable mapping of the data from the time-distance (t-x) domain to the frequency-wavenumber (f-k) or frequency-phase velocity (f-c) domain. The mapping is usually performed with the classic 2-D Fourier transform (FT) with a subsequent substitution and interpolation via c = 2πf/k. The extracted dispersion trajectories of the guided modes lack the resolution in the transformed plane to discriminate wave modes. The resolving power associated with the FT is closely linked to the aperture of the recorded data. Here, we present a linear Radon transform (RT) to image the dispersive energies of the recorded ultrasound wave fields. The RT is posed as an inverse problem, which allows implementation of the regularization strategy to enhance the focusing power. We choose a Cauchy regularization for the high-resolution RT. Three forms of Radon transform: adjoint, damped least-squares, and high-resolution are described, and are compared with respect to robustness using simulated and cervine bone data. The RT also depends on the data aperture, but not as severely as does the FT. With the RT, the resolution of the dispersion panel could be improved up to around 300% over that of the FT. Among the Radon solutions, the high-resolution RT delineated the guided wave energy with much better imaging resolution (at least 110%) than the other two forms. The Radon operator can also accommodate unevenly spaced records. The results of the study suggest that the high-resolution RT is a valuable imaging tool to extract dispersive guided wave energies under limited aperture. Copyright © 2014 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.

Development of the triplet singularity for the analysis of wings and bodies in supersonic flow

NASA Technical Reports Server (NTRS)

Woodward, F. A.

1981-01-01

A supersonic triplet singularity was developed which eliminates internal waves generated by panels having supersonic edges. The triplet is a linear combination of source and vortex distributions which gives directional properties to the perturbation flow field surrounding the panel. The theoretical development of the triplet singularity is described together with its application to the calculation of surface pressures on wings and bodies. Examples are presented comparing the results of the new method with other supersonic methods and with experimental data.

Meteorological Sensor Array (MSA) - Phase I Volume 1 (Proof of Concept Overview)

DTIC Science & Technology

2014-09-01

ND250QCS 250W) solar photovoltaic (PV) panel. The PV panel charged the batteries during the day. A Cotek S300-112 Pure Sine Wave l DC to AC power ...around a large Solar Photovoltaic Farm in southern NM; b) measurements of pressure, temperature (2 m/10 m), relative humidity (2 m), insolation (2 m...and winds (2 m/10 m); c) solar- powered instrumentation; and d) wireless data download, monitoring, and time synchronization. The MSA data processing

Dual Trajectories of Gang Affiliation and Delinquent Peer Association during Adolescence: An Examination of Long-Term Offending Outcomes

PubMed Central

Krohn, Marvin D.

2018-01-01

Prior research has demonstrated that both adolescent gang affiliation and perceived delinquent peer association are important predictors of individual offending. A crucial question is whether and how youth gang affiliation contributes to a spectrum of criminal acts above and beyond the influence of associating with delinquent peers. Using 14 waves of data from the Rochester Youth Developmental Study, an ongoing longitudinal panel study aimed at understanding the causes and consequences of delinquency and drug use in an urban sample of adolescents, the current study employs a relatively new modeling technique—dual trajectory analysis—to illustrate the dynamic relationship between these two measures among 666 male youth. The results suggest that the two measures, while overlapping, may constitute distinct concepts that operate in different ways. The most convincing evidence of gang effects, above and beyond the influence of perceived peer delinquency, is for violent behavior and by extension police arrest. Our findings contribute to developmental research and provide information that informs future gang control efforts. PMID:26748922

Disentangling the impacts of heat wave magnitude, duration and timing on the structure and diversity of sessile marine assemblages

PubMed Central

Yunnie, Anna L.E.; Vance, Thomas; Widdicombe, Stephen

2015-01-01

Extreme climatic events, including heat waves (HWs) and severe storms, influence the structure of marine and terrestrial ecosystems. Despite growing consensus that anthropogenic climate change will increase the frequency, duration and magnitude of extreme events, current understanding of their impact on communities and ecosystems is limited. Here, we used sessile invertebrates on settlement panels as model assemblages to examine the influence of HW magnitude, duration and timing on marine biodiversity patterns. Settlement panels were deployed in a marina in southwest UK for ≥5 weeks, to allow sufficient time for colonisation and development of sessile fauna, before being subjected to simulated HWs in a mesocosm facility. Replicate panel assemblages were held at ambient sea temperature (∼17 °C), or +3 °C or +5 °C for a period of 1 or 2 weeks, before being returned to the marina for a recovery phase of 2–3 weeks. The 10-week experiment was repeated 3 times, staggered throughout summer, to examine the influence of HW timing on community impacts. Contrary to our expectations, the warming events had no clear, consistent impacts on the abundance of species or the structure of sessile assemblages. With the exception of 1 high-magnitude long-duration HW event, warming did not alter not assemblage structure, favour non-native species, nor lead to changes in richness, abundance or biomass of sessile faunal assemblages. The observed lack of effect may have been caused by a combination of (1) the use of relatively low magnitude, realistic heat wave treatments compared to previous studies (2), the greater resilience of mature adult sessile fauna compared to recruits and juveniles, and (3) the high thermal tolerance of the model organisms (i.e., temperate fouling species, principally bryozoans and ascidians). Our study demonstrates the importance of using realistic treatments when manipulating climate change variables, and also suggests that biogeographical context may influence community-level responses to short-term warming events, which are predicted to increase in severity in the future. PMID:25834773

Patterns of cannabis use and prospective associations with health issues among young males.

PubMed

Baggio, Stéphanie; N'Goran, Alexandra A; Deline, Stéphane; Studer, Joseph; Dupuis, Marc; Henchoz, Yves; Mohler-Kuo, Meichun; Daeppen, Jean-Bernard; Gmel, Gerhard

2014-06-01

To test prospective associations between cannabis disorder symptoms/frequency of cannabis use and health issues and to investigate stability versus transience in cannabis use trajectories. Two waves of data collection from the longitudinal Cohort Study on Substance Use Risk Factors (C-SURF). A representative sample of young Swiss men in their early 20s from the general population. A total of 5084 young men (mean age 19.98 ± 1.19 years at time 1). Cannabis use (life-time use, frequency of use, cannabis disorder symptoms) and self-reported measures of health issues (depression, mental/physical health, health consequences) were assessed. Significant changes in cannabis use were tested using t-test/Wilcoxon's rank test for paired data. Cross-lagged panel models provided evidence regarding longitudinal associations between cannabis use and health issues. Most of the participants (84.5%) remained in the same use category and cannabis use kept to similar levels at times 1 and 2 (P = 0.114 and P = 0.755; average of 15 ± 2.8 months between times 1 and 2). Cross-lagged panel models showed that cannabis disorder symptoms predicted later health issues (e.g. depression, β = 0.087, P < 0.001; health consequences, β = 0.045, P < 0.05). The reverse paths from health issues to cannabis disorder symptoms and the cross-lagged panel model between frequency of cannabis use and health issues were non-significant. Patterns of cannabis use showed substantial continuity among young Swiss men in their early 20s. The number of symptoms of cannabis use disorder, rather than the frequency of cannabis use, is a clinically important measure of cannabis use among young Swiss men. © 2014 Society for the Study of Addiction.

Portable wireless ultrasonic systems for remote inspection

NASA Astrophysics Data System (ADS)

Zhong, C. H.; Croxford, A. J.; Wilcox, P. D.

2015-03-01

The weight and power storage of conventional wire and active wireless systems limit their applications to composite structures such as wind turbines and aerospace structures. In this paper, a structurally-integrated, inert, wireless guided wave system for rapid composite inspection is demonstrated. The wireless interface is based on electromagnetic coupling between three coils, one of which is physically connected to an ultrasonic piezoelectric transducer and embedded in the structure, while the other two are in a separate probing unit. Compact encapsulated sensor units are designed, built and successfully embedded into carbon fibre composite panel at manufacture. Chirp-based excitation is used to enable single-shot measurements with high signal-to-noise ratios to be obtained. Results from sensors embedded in carbon fibre reinforced composite panel show that signal amplitude obtained by embedding the sensor into composite is almost twice that of a surface-bonded sensor. The promising results indicate that the developed sensor can be potentially used for impact damage in a large composite structure.

Enhancing sound absorption and transmission through flexible multi-layer micro-perforated structures.

PubMed

Bravo, Teresa; Maury, Cédric; Pinhède, Cédric

2013-11-01

Theoretical and experimental results are presented into the sound absorption and transmission properties of multi-layer structures made up of thin micro-perforated panels (ML-MPPs). The objective is to improve both the absorption and insulation performances of ML-MPPs through impedance boundary optimization. A fully coupled modal formulation is introduced that predicts the effect of the structural resonances onto the normal incidence absorption coefficient and transmission loss of ML-MPPs. This model is assessed against standing wave tube measurements and simulations based on impedance translation method for two double-layer MPP configurations of relevance in building acoustics and aeronautics. Optimal impedance relationships are proposed that ensure simultaneous maximization of both the absorption and the transmission loss under normal incidence. Exhaustive optimization of the double-layer MPPs is performed to assess the absorption and/or transmission performances with respect to the impedance criterion. It is investigated how the panel volumetric resonances modify the excess dissipation that can be achieved from non-modal optimization of ML-MPPs.

Piezoelectric Shunt Vibration Damping of F-15 Panel under High Acoustic Excitation

NASA Technical Reports Server (NTRS)

Wu, Shu-Yau; Turner, Travis L.; Rizzi, Stephen A.

2000-01-01

At last year's SPIE symposium, we reported results of an experiment on structural vibration damping of an F-15 underbelly panel using piezoelectric shunting with five bonded PZT transducers. The panel vibration was induced with an acoustic speaker at an overall sound pressure level (OASPL) of about 90 dB. Amplitude reductions of 13.45 and 10.72 dB were achieved for the first and second modes, respectively, using single- and multiple-mode shunting. It is the purpose of this investigation to extend the passive piezoelectric shunt-damping technique to control structural vibration induced at higher acoustic excitation levels, and to examine the controllability and survivability of the bonded PZT transducers at these high levels. The shunting experiment was performed with the Thermal Acoustic Fatigue Apparatus (TAFA) at the NASA Langley Research Center using the same F-15 underbelly panel. The TAFA is a progressive wave tube facility. The panel was mounted in one wall of the TAFA test section using a specially designed mounting fixture such that the panel was subjected to grazing-incidence acoustic excitation. Five PZT transducers were used with two shunt circuits designed to control the first and second modes of the structure between 200 and 400 Hz. We first determined the values of the shunt inductance and resistance at an OASPL of 130 dB. These values were maintained while we gradually increased the OASPL from 130 to 154 dB in 6-dB steps. During each increment, the frequency response function between accelerometers on the panel and the acoustic excitation measured by microphones, before and after shunting, were recorded. Good response reduction was observed up to the 148dB level. The experiment was stopped at 154 dB due to wire breakage from vibration at a transducer wire joint. The PZT transducers, however, were still bonded well on the panel and survived at this high dB level. We also observed shifting of the frequency peaks toward lower frequency when the OASPL was increased. Detailed experimental results will be presented.

Lightweight composites for modular panelized construction

NASA Astrophysics Data System (ADS)

Vaidya, Amol S.

Rapid advances in construction materials technology have enabled civil engineers to achieve impressive gains in the safety, economy, and functionality of structures built to serve the common needs of society. Modular building systems is a fast-growing modern, form of construction gaining recognition for its increased efficiency and ability to apply modern technology to the needs of the market place. In the modular construction technique, a single structural panel can perform a number of functions such as providing thermal insulation, vibration damping, and structural strength. These multifunctional panels can be prefabricated in a manufacturing facility and then transferred to the construction site. A system that uses prefabricated panels for construction is called a "panelized construction system". This study focuses on the development of pre-cast, lightweight, multifunctional sandwich composite panels to be used for panelized construction. Two thermoplastic composite panels are proposed in this study, namely Composite Structural Insulated Panels (CSIPs) for exterior walls, floors and roofs, and Open Core Sandwich composite for multifunctional interior walls of a structure. Special manufacturing techniques are developed for manufacturing these panels. The structural behavior of these panels is analyzed based on various building design codes. Detailed descriptions of the design, cost analysis, manufacturing, finite element modeling and structural testing of these proposed panels are included in this study in the of form five peer-reviewed journal articles. The structural testing of the proposed panels involved in this study included flexural testing, axial compression testing, and low and high velocity impact testing. Based on the current study, the proposed CSIP wall and floor panels were found satisfactory, based on building design codes ASCE-7-05 and ACI-318-05. Joining techniques are proposed in this study for connecting the precast panels on the construction site. Keywords: Modular panelized construction, sandwich composites, composite structural insulated panels (CSIPs).

Investigation of Chinese text entry performance for mobile display interfaces.

PubMed

Lin, Po-Hung

2015-01-01

This study examined the effects of panel type, frequency of use and arrangement of phonetic symbols on operation time, usability, visual fatigue and workload in text entry performance. Three types of panel (solid, touch and mixed), three types of frequency of use (low, medium and high) and two types of the arrangement of phonetic symbols (vertical and horizontal) were investigated through 30 college students in the experiment. The results indicated that panel type, frequency of use, arrangement of phonetic symbols and the interaction between panel type and frequency of use were significant factors on operation time. Panel type was also a significant factor on usability, and a touch panel and a solid panel showed better usability than a mixed panel. Furthermore, a touch panel showed good usability and the lowest workload and therefore it is recommended to use a touch panel with vertical phonetic arrangement in sending Chinese text messages. Practitioner Summary: This study found, from ergonomics considerations, that a touch panel showed good usability and it is recommended to use a touch panel with vertical phonetic arrangement in sending Chinese text messages. Mobile display manufacturers can use the results of this study as a reference for future keyboard design.

INDOOR AND OUTDOOR ULTRA-FINE PARTICLE COUNTS IN A 1999 TWO-SEASON FRESNO, CALIFORNIA, USA ACUTE CARDIAC PANEL STUDY

EPA Science Inventory

Indoor and Outdoor Ultrafine Particle Counts in a 1999 Two-Season Fresno, California, USA Acute Cardiac Panel Study.

John Creason, Debra Walsh, Lucas Neas, US Environmental Protection Agency, Office of Research and Development, National Health and Environmental Effects R...

Fertility in The Netherlands as an expected value process and developmental readiness.

PubMed

Taris, T W

1998-01-01

In this 2-wave panel study, the decision to have children was examined in the context of Feather's (1982) expectancy-value model among a representative sample of 288 childless Dutch adults aged 18-30 years. The effects of 2 indicators of developmental readiness (age and duration of relationship) were also explored. It was expected that (a) the likelihood of having a baby would increase as a function of intentions, evaluations of being childless, and expected rewards of having children and (b) developmental readiness would be positively related to whether respondents had children at the 2nd wave of the study. Structural equation modeling was used. The results largely supported expectations. Developmental readiness affected fertility both directly and indirectly via the expected rewards of having children.

Strain Wave Acquisition by a Fiber Optic Coherent Sensor for Impact Monitoring

PubMed Central

Sbarufatti, Claudio; Beligni, Alessio; Gilioli, Andrea; Ferrario, Maddalena; Mattarei, Marco; Martinelli, Mario; Giglio, Marco

2017-01-01

A novel fiber optic sensing technology for high frequency dynamics detection is proposed in this paper, specifically tailored for structural health monitoring applications based on strain wave analysis, for both passive impact identification and active Lamb wave monitoring. The sensing solution relies on a fiber optic-based interferometric architecture associated to an innovative coherent detection scheme, which retrieves in a completely passive way the high-frequency phase information of the received optical signal. The sensing fiber can be arranged into different layouts, depending on the requirement of the specific application, in order to enhance the sensor sensitivity while still ensuring a limited gauge length if punctual measures are required. For active Lamb wave monitoring, this results in a sensing fiber arranged in multiple loops glued on an aluminum thin panel in order to increase the phase signal only in correspondence to the sensing points of interest. Instead, for passive impact identification, the required sensitivity is guaranteed by simply exploiting a longer gauge length glued to the structure. The fiber optic coherent (FOC) sensor is exploited to detect the strain waves emitted by a piezoelectric transducer placed on the aluminum panel or generated by an impulse hammer, respectively. The FOC sensor measurements have been compared with both a numerical model based on Finite Elements and traditional piezoelectric sensors, confirming a good agreement between experimental and simulated results for both active and passive impact monitoring scenarios. PMID:28773154

Childbearing and Economic Work: The Health Balance of Women in Accra, Ghana.

PubMed

Waterhouse, Philippa; Hill, Allan G; Hinde, Andrew

2016-02-01

This study aims to investigate (1) whether the health of working women with young children differs from that of working women without young children, and (2) which social factors mediate the relationship between economic and maternal role performance and health among mothers with young children. The analyses uses panel data from 697 women present in both waves of the Women's Health Study for Accra (WHSA-I and WHSA-II); a community based study of women aged 18 years and older in the Accra Metropolitan Area of Ghana conducted in 2003 and 2008-2009. Change in physical and mental health between the survey waves is compared between women with a biological child alive at WHSA-II and born since WHSA-I and women without a living biological child at WHSA-II born in the interval. To account for attrition between the two survey waves selection models were used with unconditional change score models being used as the outcome model. We found in our sample of working women that those who had a child born between WHSA-I and WHSA-II who was still alive at WHSA-II did not experience a change in mental or physical health different from other women. Among working women with young children, educational status, relationship to the household head and household demography were associated with change in mental health at the 5 % level, whilst migration status and household demography was associated with change in physical health scores. The results suggest there are no health penalties of combining work and childbearing among women with young children in Accra, Ghana.

Fuselage Structure Response to Boundary Layer, Tonal Sound, and Jet Noise

NASA Technical Reports Server (NTRS)

Maestrello, L.

2004-01-01

Experiments have been conducted to study the response of curved aluminum and graphite-epoxy fuselage structures to flow and sound loads from turbulent boundary layer, tonal sound, and jet noise. Both structures were the same size. The aluminum structure was reinforced with tear stoppers, while the graphite-epoxy structure was not. The graphite-epoxy structure weighed half as much as the aluminum structure. Spatiotemporal intermittence and chaotic behavior of the structural response was observed, as jet noise and tonal sound interacted with the turbulent boundary layer. The fundamental tone distributed energy to other components via wave interaction with the turbulent boundary layer. The added broadband sound from the jet, with or without a shock, influenced the responses over a wider range of frequencies. Instantaneous spatial correlation indicates small localized spatiotemporal regions of convected waves, while uncorrelated patterns dominate the larger portion of the space. By modifying the geometry of the tear stoppers between panels and frame, the transmitted and reflected waves of the aluminum panels were significantly reduced. The response level of the graphite-epoxy structure was higher, but the noise transmitted was nearly equal to that of the aluminum structure. The fundamental shock mode is between 80 deg and 150 deg and the first harmonic is between 20 deg and 80 deg for the underexpanded supersonic jet impinging on the turbulent boundary layer influencing the structural response. The response of the graphite-epoxy structure due to the fundamental mode of the shock impingement was stabilized by an externally fixed oscillator.

77 FR 20642 - General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-05

... Advisory Committee. General Function of the Committee: To provide advice and recommendations to the Agency... utilizes electromagnetic waves to characterize human tissue in real time and provides intraoperative...

Japanese Study on Stratification, Health, Income, and Neighborhood: Study Protocol and Profiles of Participants

PubMed Central

Takada, Misato; Kondo, Naoki; Hashimoto, Hideki

2014-01-01

Background The Japanese Study on Stratification, Health, Income, and Neighborhood (J-SHINE) aims to clarify the complex associations between social factors and health from an interdisciplinary perspective and to provide a database for use in various health policy evaluations. Methods J-SHINE is an ongoing longitudinal panel study of households of adults aged 25–50 years. The wave 1 survey was carried out in 2010 among adults randomly selected from the resident registry of four urban and suburban municipalities in the greater Tokyo metropolitan area, Japan. In 2011, surveys for the participants’ spouse/partner and child were additionally conducted. The wave 2 survey was conducted in 2012 for the wave 1 participants and will be followed by the wave 2 survey for spouse/partner and child in 2013. Results Wave 1 sample sizes were 4357 for wave 1 participants (valid response rate: 31.3%; cooperation rate: 51.8%), 1873 for spouse/partner (response rate: 61.9%), and 1520 for child (response rate: 67.7%). Wave 2 captured 69.0% of wave 1 participants. Information gathered covered socio-demographics, household economy, self-reported health conditions and healthcare utilization, stress and psychological values, and developmental history. A subpopulation underwent physiological (n = 2468) and biomarker (n = 1205) measurements. Conclusions Longitudinal survey data, including repeated measures of social factors evaluated based on theories and techniques of various disciplines, like J-SHINE, should contribute toward opening a web of causality for society and health, which may have important policy implications for recent global health promotion strategies such as the World Health Organization’s Social Determinants of Health approach and the second round of Japan’s Healthy Japan 21. PMID:24814507

Japanese study on stratification, health, income, and neighborhood: study protocol and profiles of participants.

PubMed

Takada, Misato; Kondo, Naoki; Hashimoto, Hideki

2014-01-01

The Japanese Study on Stratification, Health, Income, and Neighborhood (J-SHINE) aims to clarify the complex associations between social factors and health from an interdisciplinary perspective and to provide a database for use in various health policy evaluations. J-SHINE is an ongoing longitudinal panel study of households of adults aged 25-50 years. The wave 1 survey was carried out in 2010 among adults randomly selected from the resident registry of four urban and suburban municipalities in the greater Tokyo metropolitan area, Japan. In 2011, surveys for the participants' spouse/partner and child were additionally conducted. The wave 2 survey was conducted in 2012 for the wave 1 participants and will be followed by the wave 2 survey for spouse/partner and child in 2013. Wave 1 sample sizes were 4357 for wave 1 participants (valid response rate: 31.3%; cooperation rate: 51.8%), 1873 for spouse/partner (response rate: 61.9%), and 1520 for child (response rate: 67.7%). Wave 2 captured 69.0% of wave 1 participants. Information gathered covered socio-demographics, household economy, self-reported health conditions and healthcare utilization, stress and psychological values, and developmental history. A subpopulation underwent physiological (n = 2468) and biomarker (n = 1205) measurements. Longitudinal survey data, including repeated measures of social factors evaluated based on theories and techniques of various disciplines, like J-SHINE, should contribute toward opening a web of causality for society and health, which may have important policy implications for recent global health promotion strategies such as the World Health Organization's Social Determinants of Health approach and the second round of Japan's Healthy Japan 21.

Matter-wave solitons supported by quadrupole-quadrupole interactions and anisotropic discrete lattices

NASA Astrophysics Data System (ADS)

Zhong, Rong-Xuan; Huang, Nan; Li, Huang-Wu; He, He-Xiang; Lü, Jian-Tao; Huang, Chun-Qing; Chen, Zhao-Pin

2018-04-01

We numerically and analytically investigate the formations and features of two-dimensional discrete Bose-Einstein condensate solitons, which are constructed by quadrupole-quadrupole interactional particles trapped in the tunable anisotropic discrete optical lattices. The square optical lattices in the model can be formed by two pairs of interfering plane waves with different intensities. Two hopping rates of the particles in the orthogonal directions are different, which gives rise to a linear anisotropic system. We find that if all of the pairs of dipole and anti-dipole are perpendicular to the lattice panel and the line connecting the dipole and anti-dipole which compose the quadrupole is parallel to horizontal direction, both the linear anisotropy and the nonlocal nonlinear one can strongly influence the formations of the solitons. There exist three patterns of stable solitons, namely horizontal elongation quasi-one-dimensional discrete solitons, disk-shape isotropic pattern solitons and vertical elongation quasi-continuous solitons. We systematically demonstrate the relationships of chemical potential, size and shape of the soliton with its total norm and vertical hopping rate and analytically reveal the linear dispersion relation for quasi-one-dimensional discrete solitons.

Sound attenuation and absorption by micro-perforated panels backed by anisotropic fibrous materials: Theoretical and experimental study

NASA Astrophysics Data System (ADS)

Bravo, Teresa; Maury, Cédric

2018-07-01

Enhancing the attenuation or the absorption of low-frequency noise using lightweight bulk-reacting liners is still a demanding task in surface and air transport systems. The aim of this study is to understand the physical mechanisms involved in the attenuation and absorption properties of partitions made up of a thin micro-perforated panel (MPP) rigidly backed by a cavity filled with anisotropic fibrous material. Such a layout is denoted as a MPPF partition. Analytical models are formulated in the flow and no-flow cases to predict the axial damping of the least attenuated wave in a MPPF partition as well as the plane wave absorption coefficient. They account for a rigid or an elastic MPP facing a bulk-reacting fully-anisotropic material. A cost-efficient solution of the propagation constant for the least attenuated mode is obtained using a simulated annealing search method as well as a low-frequency approximation to the axial attenuation. The normal incidence absorption model is assessed in the no-flow case against pressure-velocity measurements of the surface impedance over a MPPF partition filled with fibreglass material. A parametric study is conducted to evaluate the MPP and the cavity constitutive parameters that mostly enhance the axial attenuation and sound absorption properties, with special interest on the MPP airframe relative velocity. This sensitivity study provides guidelines that could be used to further reduce the search space in parametric or impedance optimization studies.

Employment hardships and single mothers' self-rated health: evidence from the panel study of income dynamics.

PubMed

Wu, Chi-Fang; Wang, Ming-Sheng; Eamon, Mary Keegan

2014-01-01

Using a national sample of single mothers from the 2007 and 2009 waves of the Panel Study of Income Dynamics, this study examined the effects of multiple employment statuses on the selfrated health of single mothers during the recent economic recession. Unlike other studies, the current study minimized selection bias by controlling for prior self-rated health, in addition to other predisposing factors, enabling factors, and need factors. We found that underemployment, but not unemployment, is associated with lower levels of self-rated health of single mothers. Results further indicate that the 25-39 age range (compared to the 18-24 age range), lower family income, prior lower self-rated health, more chronic diseases, and binge drinking place single mothers at an increased risk of lower levels of self-rated health. In contrast, strength-building physical activity is significantly associated with higher levels of self-rated health. Implications for health care policy and social work practice are drawn from the results.

Mid-Twenty-First-Century Changes in Global Wave Energy Flux: Single-Model, Single-Forcing and Single-Scenario Ensemble Projections

NASA Astrophysics Data System (ADS)

Semedo, Alvaro; Lemos, Gil; Dobrynin, Mikhail; Behrens, Arno; Staneva, Joanna; Miranda, Pedro

2017-04-01

The knowledge of ocean surface wave energy fluxes (or wave power) is of outmost relevance since wave power has a direct impact in coastal erosion, but also in sediment transport and beach nourishment, and ship, as well as in coastal and offshore infrastructures design. Changes in the global wave energy flux pattern can alter significantly the impact of waves in continental shelf and coastal areas. Up until recently the impact of climate change in future global wave climate had received very little attention. Some single model single scenario global wave climate projections, based on CMIP3 scenarios, were pursuit under the auspices of the COWCLIP (coordinated ocean wave climate projections) project, and received some attention in the IPCC (Intergovernmental Panel for Climate Change) AR5 (fifth assessment report). In the present study the impact of a warmer climate in the near future global wave energy flux climate is investigated through a 4-member "coherent" ensemble of wave climate projections: single-model, single-forcing, and single-scenario. In this methodology model variability is reduced, leaving only room for the climate change signal. The four ensemble members were produced with the wave model WAM, forced with wind speed and ice coverage from EC-Earth projections, following the representative concentration pathway with a high emissions scenario 8.5 (RCP8.5). The ensemble present climate reference period (the control run) has been set for 1976 to 2005. The projected changes in the global wave energy flux climate are analyzed for the 2031-2060 period.

Laser-based ultrasonics by dual-probe interferometer detection and narrow-band ultrasound generation

NASA Astrophysics Data System (ADS)

Huang, Jin

1993-01-01

Despite the advantages of laser-based ultrasonic (LBU) systems, the overall sensitivity of LBU systems needs to be improved for practical applications. Progress is reported to achieve better LBU detection accuracy and sensitivity for applications with surface waves and Lamb waves. A novel dual-probe laser interferometer has been developed to measure the same signal at two points. The dual-probe interferometer is a modification of a conventional single-probe interferometer in that the reference beam is guided to a second detecting point on the specimen surface to form a differential measurement mode, which measure the difference of the displacements at the two points. This dual-probe interferometer is particularly useful for accurate measurements of the speed and attenuation of surface waves and Lamb waves. The dual-probe interferometer has been applied to obtain accurate measurements of the surface wave speed and attenuation on surfaces of increasing surface roughness. It has also been demonstrated that with an appropriate signal processing method, namely, the power cepstrum method, the dual-probe interferometer is applicable to measure the local surface wave speed even when the probe separation is so small that the two waveforms in the interferometer output signal overlap in the time domain. Narrow-band signal generation and detection improve the sensitivity of LBU systems. It is proposed to use a diffraction grating to form an array of illuminating strips which form a source of narrowband surface and Lamb waves. The line-array of thermoelastic sources generates narrow-band signals whose frequency and bandwidth can be easily controlled. The optimum line-array parameters, such as width, spacing and the number of lines in the array have been derived theoretically and verified experimentally. Narrow-band signal generation with optimum parameters has been demonstrated. The enhanced LBU system with dual-probe detection and narrowband signal generation has been successfully applied to the detection of cracks emanating from rivet holes in aircraft fuselage panel samples. A compact fiber-optic dual-probe interferometer has also been developed and applied to the above mentioned problem of crack detection. Results agree well with those obtained with a bulk LBU system.

Cryogenic performance of slotted brazed Rene 41 honeycomb panels

NASA Technical Reports Server (NTRS)

Hepler, A. K.; Swegle, A. R.

1982-01-01

Two brazed Rene 41 honeycomb panels that would incorporate a frame element were designed, fabricated and tested. The panels were representative of the lower surface of an advanced space transportation vehicle. The first panel was a two span panel supported by a center frame and on edges parallel to it. The second panel was a two span panel supported by a center frame and on edges parallel to it. The second panel was a three span panel supported on two frames and on edges parallel to the frames. Each panel had its outer skin slotted to reduce the thermal stresses of the panel skins. The first panel was tested under simulated boost conditions that included liquid hydrogen exposure of the frame and inner skin and radiant heat to 478K on the outer skins. The first panel was tested to investigate the effect of thermal stresses in skins and core caused by the panel being restrained by a cold integral frame and to observe the effects of frost formation and possible liquid air development in and around outer skin slots.

Origins of narcissism in children.

PubMed

Brummelman, Eddie; Thomaes, Sander; Nelemans, Stefanie A; Orobio de Castro, Bram; Overbeek, Geertjan; Bushman, Brad J

2015-03-24

Narcissism levels have been increasing among Western youth, and contribute to societal problems such as aggression and violence. The origins of narcissism, however, are not well understood. Here, we report, to our knowledge, the first prospective longitudinal evidence on the origins of narcissism in children. We compared two perspectives: social learning theory (positing that narcissism is cultivated by parental overvaluation) and psychoanalytic theory (positing that narcissism is cultivated by lack of parental warmth). We timed the study in late childhood (ages 7-12), when individual differences in narcissism first emerge. In four 6-mo waves, 565 children and their parents reported child narcissism, child self-esteem, parental overvaluation, and parental warmth. Four-wave cross-lagged panel models were conducted. Results support social learning theory and contradict psychoanalytic theory: Narcissism was predicted by parental overvaluation, not by lack of parental warmth. Thus, children seem to acquire narcissism, in part, by internalizing parents' inflated views of them (e.g., "I am superior to others" and "I am entitled to privileges"). Attesting to the specificity of this finding, self-esteem was predicted by parental warmth, not by parental overvaluation. These findings uncover early socialization experiences that cultivate narcissism, and may inform interventions to curtail narcissistic development at an early age.

Laboratory study of PCB transport from primary sources to settled dust

EPA Science Inventory

Transport of house dust and Arizona Test Dust on polychlorinated biphenyl (PCB)-containing panels and PCB-free panels was investigated in a 30-m3 stainless steel chamber. The PCB-containing panels were aluminum sheets coated with a PCB-spiked, oil-based primer or two-part polysul...

Structural health monitoring technology for bolted carbon-carbon thermal protection panels

NASA Astrophysics Data System (ADS)

Yang, Jinkyu

2005-12-01

The research in this dissertation is motivated by the need for reliable inspection technologies for the detection of bolt loosening in Carbon-Carbon (C-C) Thermal Protection System (TPS) panels on Space Operation Vehicles (SOV) using minimal human intervention. A concept demonstrator of the Structural Health Monitoring (SHM) system was developed to autonomously detect the degradation of the mechanical integrity of the standoff C-C TPS panels. This system assesses the torque levels of the loosened bolts in the C-C TPS panel, as well as identifies the location of those bolts accordingly. During the course of building the proposed SHM prototype, efforts have been focused primarily on developing a trustworthy diagnostic scheme and a responsive sensor suite. Based on the microcontact conditions and damping phenomena of ultrasonic waves across the bolted joints, an Attenuation-based Diagnostic Method was proposed to assess the fastener integrity by observing the attenuation patterns of the resultant sensor signals. Parametric model studies and prototype testing validated the theoretical explanation of the attenuation-based method. Once the diagnostic scheme was determined, the implementation of a sensor suite was the next step. A new PZT-embedded sensor washer was developed to enhance remote sensing capability and achieve sufficient sensitivity by guiding diagnostic waves primarily through the inspection areas. The sensor-embedded washers replace the existing washers to constitute the sensor network, as well as to avoid jeopardizing the integrity of the original fastener components. After sensor design evolution and appropriate algorithm development, verification tests were conducted using a shaker and a full-scale oven, which simulated the acoustic and thermal environments during the re-entry process, respectively. The test results revealed that the proposed system successfully identifies the loss of the preload for the bolted joints that were loosened. The sensors were also found to be durable under the cyclic mechanical and thermal loads without major failures.

Understanding the Consequences of Newcomer Integration Processes: The Sport Team Socialization Tactics Questionnaire.

PubMed

Benson, Alex J; Eys, Mark

2017-02-01

The ways in which newcomers are integrated into sport teams may have broad consequences for the athletes entering the group, as well as for the existing team members. Drawing from organizational socialization theory, the current research developed a questionnaire to assess athletes' perceptions of how newcomers are socialized into their group. Across four studies, think-aloud interviews (N = 8), an expert panel review (N = 6), cross-sectional tests of the factor structure (N Study 2  = 197; N Study 3  = 460), and a two-wave correlational design (N Study 4  = 194) were used to evaluate the construct validity and the internal consistency of the Sport Team Socialization Tactics Questionnaire (STSTQ). Collectively, these efforts identified a three-factor structure underlying the STSTQ and provided preliminary evidence for its validity. The STSTQ enables researchers to systematically examine the individual- and group-level consequences associated with the socialization tactics implemented in sport teams.

The Influence of Model Complexity on the Impact Response of a Shuttle Leading-Edge Panel Finite Element Simulation

NASA Technical Reports Server (NTRS)

Jones, Lisa E. (Technical Monitor); Stockwell, Alan E.

2005-01-01

LS-DYNA simulations were conducted to study the influence of model complexity on the response of a typical Reinforced Carbon-Carbon (RCC) panel to a foam impact at a location approximately midway between the ribs. A structural model comprised of Panels 10, 11, and TSeal 11 was chosen as the baseline model for the study. A simulation was conducted with foam striking Panel 10 at Location 4 at an alpha angle of 10 degrees, with an impact velocity of 1000 ft/sec. A second simulation was conducted after removing Panel 11 from the model, and a third simulation was conducted after removing both Panel 11 and T-Seal 11. All three simulations showed approximately the same response for Panel 10, and the simplified simulation model containing only Panel 10 was shown to be significantly less expensive to execute than the other two more complex models.

Graphite/epoxy composite stiffened panel fabrication development

NASA Technical Reports Server (NTRS)

Palmer, R. J.

1984-01-01

This report describes the manufacturing development procedures used to fabricate a series of carbon/epoxy panels with integrally molded stiffeners. Panel size was started at 6 inches by 18 inches and one stiffener and increased to 30 inches by 60 inches and six integral stiffeners. Stiffener concepts were optimized for minimum weight (or mass) to carry stress levels from 1500 lbs/inch to 25,000 lbs/inch compression load. Designs were created and manufactured with a stiffener configuration of integrally molded hat, J, I, sine wave I, solid blade, and honeycomb blade shapes. Successful and unsuccessful detail methods of tooling, lay-up methods, and bagging methods are documented. Recommendations are made for the best state-of-the-art manufacturing technique developed for type of stiffener construction.

Heat pipe thermal conditioning panel

NASA Technical Reports Server (NTRS)

Saaski, E. W.; Loose, J. D.; Mccoy, K. E.

1974-01-01

Thermal control of electronic hardware and experiments on future space vehicles is critical to proper functioning and long life. Thermal conditioning panels (cold plates) are a baseline control technique in current conceptual studies. Heat generating components mounted on the panels are typically cooled by fluid flowing through integral channels within the panel. However, replacing the pumped fluid coolant loop within the panel with heat pipes offers attractive advantages in weight, reliability, and installation. This report describes the development and fabrication of two large 0.76 x 0.76 m heat pipe thermal conditioning panels to verify performance and establish the design concept.

Postbuckling delamination of a stiffened composite panel using finite element methods

NASA Technical Reports Server (NTRS)

Natsiavas, S.; Babcock, C. D.; Knauss, W. G.

1987-01-01

A combined numerical and experimental study is carried out for the postbuckling behavior of a stiffened composite panel. The panel is rectangular and is subjected to static in-plane compression on two opposite edges to the collapse level. Nonlinear (large deflection) plate theory is employed, together with an experimentally based failure criterion. It is found that the stiffened composite panel can exhibit significant postbuckling strength.

Experimental Study on Composite Light-weight Microporous Concrete Cladding Panels

NASA Astrophysics Data System (ADS)

Lida, Tian; Dongyan, Wang; Kang, Liu

2018-03-01

A new type of composite light-weight microporous concrete cladding panel was developed, with the compound function of retaining and heat preservation. Two specimens of the new cladding panel and connection detailing were made for out-of-plane bending experiment. The results indicate that the new cladding panel and its connection detailing are of sufficient stiffness, bearing capacity and deformability under wind load and out-of-plane seismic action.

Retrieval of reflections from ambient noise using illumination diagnosis

NASA Astrophysics Data System (ADS)

Vidal, C. Almagro; Draganov, D.; van der Neut, J.; Drijkoningen, G.; Wapenaar, K.

2014-09-01

Seismic interferometry (SI) enables the retrieval of virtual sources at the location of receivers. In the case of passive SI, no active sources are used for the retrieval of the reflection response of the subsurface, but ambient-noise recordings only. The resulting retrieved response is determined by the illumination characteristics of the recorded ambient noise. Characteristics like geometrical distribution and signature of the noise sources, together with the complexity of the medium and the length of the noise records, determine the quality of the retrieved virtual-shot events. To retrieve body wave reflections, one needs to correlate body-wave noise. A source of such noise might be regional seismicity. In regions with notable human presence, the dominant noise sources are generally located at or close to the surface. In the latter case, the noise will be dominated by surface waves and consequently also the retrieved virtual common-source panels will contain dominant retrieved surface waves, drowning out possible retrieved reflections. In order to retrieve reflection events, suppression of the surface waves becomes the most important pre-processing goal. Because of the reasons mentioned above, we propose a fast method to evaluate the illumination characteristics of ambient noise using the correlation results from ambient-noise records. The method is based on the analysis of the so-called source function of the retrieved virtual-shot panel, and evaluates the apparent slowness of arrivals in the correlation results that pass through the position of the virtual source and at zero time. The results of the diagnosis are used to suppress the retrieval of surface waves and therefore to improve the quality of the retrieved reflection response. We explain the approach using modelled data from transient and continuous noise sources and an example from a passive field data set recorded at Annerveen, Northern Netherlands.

The effect of cigarette prices on brand-switching in China: a longitudinal analysis of data from the ITC China Survey

PubMed Central

White, Justin S; Li, Jing; Hu, Teh-wei; Fong, Geoffrey T; Jiang, Yuan

2014-01-01

Background Recent studies have found that Chinese smokers are relatively unresponsive to cigarette prices. As the Chinese government contemplates higher tobacco taxes, it is important to understand the reasons for this low response. One possible explanation is that smokers buffer themselves from rising cigarette prices by switching to cheaper cigarette brands. Objective This study examines how cigarette prices influence consumers’ choices of cigarette brands in China. Methods This study uses panel data from the first three waves of the International Tobacco Control China Survey, drawn from six large cities in China and collected between 2006 and 2009. The study sample includes 3477 smokers who are present in at least two waves (8552 person-years). Cigarette brands are sorted by price into four tiers, using excise tax categories to determine the cut-off for each tier. The analysis relies on a conditional logit model to identify the relationship between price and brand choice. Findings Overall, 38% of smokers switched price tiers from one wave to the next. A ¥1 change in the price of cigarettes alters the tier choice of 4–7% of smokers. Restricting the sample to those who chose each given tier at baseline, a ¥1 increase in price in a given tier would decrease the share choosing that tier by 4% for Tier 1 and 1–2% for Tiers 2 and 3. Conclusions China's large price spread across cigarette brands appears to alter the brand selection of some consumers, especially smokers of cheaper brands. Tobacco pricing and tax policy can influence consumers’ incentives to switch brands. In particular, whereas ad valorem taxes in a tiered pricing system like China's encourage trading down, specific excise taxes discourage the practice. PMID:23697645

Chronicity of sexual harassment and generalized work-place abuse: effects on drinking outcomes.

PubMed

Rospenda, K M; Richman, J A; Wislar, J S; Flaherty, J A

2000-12-01

This study examined the impact of two forms of interpersonal conflict in the work-place, sexual harassment (SH) and generalized work-place abuse (GWA), on drinking outcomes. We hypothesized that SH and GWA would be associated more strongly with negative outcomes than task-related work stressors, especially when SH and GWA were chronic problems. This was a two-wave panel study. The study was conducted at an urban university in the United States. Participants were 2038 university employees in four occupational groups (faculty, student, clerical and service workers) who responded to both waves of the survey. Data on SH, GWA, task-related stressors and drinking outcomes were gathered from self-report mail questionnaires. Data from 1880 non-abstaining respondents were included in the analyses. SH and GWA experiences were widespread, typically chronic, and tended to co-occur. In regression analyses controlling for demographics, occupational group, prior drinking and task-related stress, GWA chronicity was linked to increased odds of reporting one or more indicators of problem drinking at time 2, in contrast to onset and remission. SH chronicity coupled with no GWA experiences was also significantly related to increased drinking variability. Task-related stressors generally did not explain significant variance in drinking outcomes. SH and GWA may be better predictors of drinking behavior compared to task-related stressors, particularly when harassment is chronic. Increased attention to conflictual relationships in the work-place, the relationship between SH and GWA and the dynamic nature of stressors in general is necessary in future research on drinking behavior.

Two-Dimensional Sequential and Concurrent Finite Element Analysis of Unstiffened and Stiffened Aluminum and Composite Panels with Hole

NASA Technical Reports Server (NTRS)

Razzaq, Zia; Prasad, Venkatesh

1988-01-01

The results of a detailed investigation of the distribution of stresses in aluminum and composite panels subjected to uniform end shortening are presented. The focus problem is a rectangular panel with two longitudinal stiffeners, and an inner stiffener discontinuous at a central hole in the panel. The influence of the stiffeners on the stresses is evaluated through a two-dimensional global finite element analysis in the absence or presence of the hole. Contrary to the physical feel, it is found that the maximum stresses from the glocal analysis for both stiffened aluminum and composite panels are greater than the corresponding stresses for the unstiffened panels. The inner discontinuous stiffener causes a greater increase in stresses than the reduction provided by the two outer stiffeners. A detailed layer-by-layer study of stresses around the hole is also presented for both unstiffened and stiffened composite panels. A parallel equation solver is used for the global system of equations since the computational time is far less than that using a sequential scheme. A parallel Choleski method with up to 16 processors is used on Flex/32 Multicomputer at NASA Langley Research Center. The parallel computing results are summarized and include the computational times, speedups, bandwidths, and their inter-relationships for the panel problems. It is found that the computational time for the Choleski method decreases with a decrease in bandwidth, and better speedups result as the bandwidth increases.

A bacterial bioreporter panel to assay the cytotoxicity of atmospheric particulate matter

NASA Astrophysics Data System (ADS)

Kessler, Nivi; Schauer, James J.; Yagur-Kroll, Sharon; Melamed, Sahar; Tirosh, Ofir; Belkin, Shimshon; Erel, Yigal

2012-12-01

Numerous studies have demonstrated that elevated concentrations of suspended atmospheric particulate matter (PM) are associated with adverse health effects. In order to minimize the adverse public health effects of atmospheric PM by exposure management, there is a need for a greater understanding of the toxic mechanisms and the components that are responsible for the toxic effects. The aim of this study was to utilize bioassay techniques to investigate these aspects. For this purpose a reporter panel of 9 genetically engineered bacterial (Escherichia coli) strains was composed. Each panel member was designed to report on a different stress condition with a measurable light signal produced by the luciferase enzyme. Toxic mechanisms and components were studied using six anthropogenic PM source samples, including two vehicle combustion particles, three coal fly ash (CFA) samples and an urban dust sample. The most prominent outcome of the panel exposure results were broad panel responses observed for two of the CFA samples, indicating oxidative stress, respiration inhibition and iron deficiency. These responses were relieved when the samples were treated with EDTA, a non-specific metal chelator, suggesting the involvement of metals in the observed effects. Bioavailability analysis of the samples suggests that chromium was related to the toxic responses induced by two of the CFA samples. Oxidative stress was also observed in several samples of ambient atmospheric aerosols and excess metal toxicity in an urban dust sample collected in a parking lot. The reporter panel approach, as demonstrated in this study, has the potential of providing novel insights as to the mechanisms of atmospheric PM toxicity. Furthermore, combining the panel's results with bioavailability data can enlighten about the role of different PM components in the observed toxicity.

PRELIMINARY FINDINGS FROM THE NERL RESEARCH TRIANGLE PARK PARTICULATE MATTER PANEL STUDY

EPA Science Inventory

The U.S. Environmental Protection Agency is currently conducting the National Exposure Research Laboratory (NERL) Research Triangle Park (RTP) Particulate Matter (PM) Panel Study. This study represents a one year investigation of PM and related co-pollutants involving two dist...

Information management: considering adolescents' regulation of parental knowledge.

PubMed

Marshall, Sheila K; Tilton-Weaver, Lauree C; Bosdet, Lara

2005-10-01

Employing Goffman's [(1959). The presentation of self in everyday life. New York: Doubleday and Company] notion of impression management, adolescents' conveyance of information about their whereabouts and activities to parents was assessed employing two methodologies. First, a two-wave panel design with a sample of 121 adolescents was used to test a model of information management incorporating two forms of information regulation (lying and willingness to disclose), adolescents' perception of their parents' knowledge about their activities, and adolescent misconduct. Path analysis was used to examine the model for two forms of misconduct as outcomes: substance use and antisocial behaviours. Fit indices indicate the path models were all good fits to the data. Second, 96 participants' responses to semi-structured questions were analyzed using a qualitative analytic technique. Findings reveal adolescents withhold or divulge information in coordination with their parents, employ impression management techniques, and try to balance safety issues with preservation of the parent-adolescent relationship.

Microwave and Millimeter Wave Imaging Using Synthetic Aperture Focusing and Holographical Techniques

NASA Technical Reports Server (NTRS)

Case, Joseph Tobias

2005-01-01

Microwave and millimeter wave nondestructive testing and evaluation (NDT&E) methods have shown great potential for determining material composition in composite structures, determining material thickness or debond thickness between two layers, and determining the location and size of flaws, defects, and anomalies. The same testing methods have also shown great potential to produce relatively high-resolution images of voids inside Spray On Foam Insulation (SOFI) test panels using real focused methods employing lens antennas. An alternative to real focusing methods are synthetic focusing methods. The essence of synthetic focusing is to match the phase of the scattered signal to measured points spaced regularly on a plane. Many variations of synthetic focusing methods have already been developed for radars, ultrasonic testing applications, and microwave concealed weapon detection. Two synthetic focusing methods were investigated; namely, a) frequency-domain synthetic aperture focusing technique (FDSAFT), and b) wide-band microwave holography. These methods were applied towards materials whose defects were of low dielectric contrast like air void in SOFI. It is important to note that this investigation used relatively low frequencies from 8.2 GHz to 26.5 GHz that are not conducive for direct imaging of the SOFI. The ultimate goal of this work has been to demonstrate the capability of these methods before they are applied to much higher frequencies such as the millimeter wave frequency spectrum (e.g., 30-300 GHz).

Combined mine tremors source location and error evaluation in the Lubin Copper Mine (Poland)

NASA Astrophysics Data System (ADS)

Leśniak, Andrzej; Pszczoła, Grzegorz

2008-08-01

A modified method of mine tremors location used in Lubin Copper Mine is presented in the paper. In mines where an intensive exploration is carried out a high accuracy source location technique is usually required. The effect of the flatness of the geophones array, complex geological structure of the rock mass and intense exploitation make the location results ambiguous in such mines. In the present paper an effective method of source location and location's error evaluations are presented, combining data from two different arrays of geophones. The first consists of uniaxial geophones spaced in the whole mine area. The second is installed in one of the mining panels and consists of triaxial geophones. The usage of the data obtained from triaxial geophones allows to increase the hypocenter vertical coordinate precision. The presented two-step location procedure combines standard location methods: P-waves directions and P-waves arrival times. Using computer simulations the efficiency of the created algorithm was tested. The designed algorithm is fully non-linear and was tested on the multilayered rock mass model of the Lubin Copper Mine, showing a computational better efficiency than the traditional P-wave arrival times location algorithm. In this paper we present the complete procedure that effectively solves the non-linear location problems, i.e. the mine tremor location and measurement of the error propagation.

Non-ambiguous recovery of Biot poroelastic parameters of cellular panels using ultrasonicwaves

NASA Astrophysics Data System (ADS)

Ogam, Erick; Fellah, Z. E. A.; Sebaa, Naima; Groby, J.-P.

2011-03-01

The inverse problem of the recovery of the poroelastic parameters of open-cell soft plastic foam panels is solved by employing transmitted ultrasonic waves (USW) and the Biot-Johnson-Koplik-Champoux-Allard (BJKCA) model. It is shown by constructing the objective functional given by the total square of the difference between predictions from the BJKCA interaction model and experimental data obtained with transmitted USW that the inverse problem is ill-posed, since the functional exhibits several local minima and maxima. In order to solve this problem, which is beyond the capability of most off-the-shelf iterative nonlinear least squares optimization algorithms (such as the Levenberg Marquadt or Nelder-Mead simplex methods), simple strategies are developed. The recovered acoustic parameters are compared with those obtained using simpler interaction models and a method employing asymptotic phase velocity of the transmitted USW. The retrieved elastic moduli are validated by solving an inverse vibration spectroscopy problem with data obtained from beam-like specimens cut from the panels using an equivalent solid elastodynamic model as estimator. The phase velocities are reconstructed using computed, measured resonance frequencies and a time-frequency decomposition of transient waves induced in the beam specimen. These confirm that the elastic parameters recovered using vibration are valid over the frequency range ofstudy.

Numerical Study of Transmission Loss Through a Slow Gas Layer Adjacent to a Plate

NASA Technical Reports Server (NTRS)

Schiller, Noah H.; Beck, Benjamin S.; Slagle, Adam C.

2013-01-01

This paper describes a systematic numerical investigation of the sound transmission loss through a multilayer system consisting of a bagged gas and lightweight panel. The goal of the study is to better understand the effect of the gas on transmission loss and determine whether a gas with a slow speed of sound is beneficial for noise control applications. As part of the study, the density and speed of sound of the gas are varied independently to assess the impact of each on transmission loss. Results show that near grazing incidence the plane wave transmission loss through the multilayer system is more sensitive to the speed of sound than the density of the gas. In addition, it was found that a slow wave speed in the bagged gas provides more low-frequency transmission loss benefit than a fast wave speed. At low angles of incidence, close to the plate normal, the benefit is due to the reduction of the characteristic impedance of the gas. At high angles of incidence, the benefit is attributed to the fact that the incident waves at the air/gas interface are bent towards the surface normal. Since transmission loss is angle dependent, refraction in the slow gas layer results in a significant improvement in the transmission loss at high angles of incidence.

Integrated optical circuit engineering IV; Proceedings of the Meeting, Cambridge, MA, Sept. 16, 17, 1986

NASA Astrophysics Data System (ADS)

Mentzer, Mark A.; Sriram, S.

The design and implementation of integrated optical circuits are discussed in reviews and reports. Topics addressed include lithium niobate devices, silicon integrated optics, waveguide phenomena, coupling considerations, processing technology, nonlinear guided-wave optics, integrated optics for fiber systems, and systems considerations and applications. Also included are eight papers and a panel discussion from an SPIE conference on the processing of guided-wave optoelectronic materials (held in Los Angeles, CA, on January 21-22, 1986).

Simplified method to solve sound transmission through structures lined with elastic porous material.

PubMed

Lee, J H; Kim, J

2001-11-01

An approximate analysis method is developed to calculate sound transmission through structures lined with porous material. Because the porous material has both the solid phase and fluid phase, three wave components exist in the material, which makes the related analysis very complicated. The main idea in developing the approximate method is very simple: modeling the porous material using only the strongest of the three waves, which in effect idealizes the material as an equivalent fluid. The analysis procedure has to be conducted in two steps. In the first step, sound transmission through a flat double panel with a porous liner of infinite extents, which has the same cross sectional construction as the actual structure, is solved based on the full theory and the strongest wave component is identified. In the second step sound transmission through the actual structure is solved modeling the porous material as an equivalent fluid while using the actual geometry of the structure. The development and validation of the method are discussed in detail. As an application example, the transmission loss through double walled cylindrical shells with a porous core is calculated utilizing the simplified method.

The Importance of Adolescents' Sexually Outgoing Self-Concept: Differential Roles of Self- and Other-Generated Sexy Self-Presentations in Social Media.

PubMed

van Oosten, Johanna M F; de Vries, Dian A; Peter, Jochen

2018-01-01

The present study investigated the relationships between (exposure to) sexy self-presentations on social network sites (SNSs) and adolescents' sexual self-concept over time. Results from a three-wave panel study among 1,288 Dutch adolescents (aged 13-17 years) showed that more frequent engagement in sexy self-presentation, rather than exposure to sexy self-presentations of others, on SNSs positively predicted the importance of being sexually outgoing (e.g., sexy, seductive, and wild) in adolescents' self-concept 6 months later.

The influences of perceived social support and personality on trajectories of subsequent depressive symptoms in Taiwanese youth.

PubMed

Lien, Yin-Ju; Hu, Jhih-Ning; Chen, Chia-Yi

2016-03-01

Little is known about the combined effect of personality and social support on trajectories of depressive symptoms among youth. This study aims to investigate the influence of social support in different contexts on the development of depressive symptoms during adolescence and whether the association is moderated by adolescents' personality. The data using in this study is selected from the Taiwan Educational Panel Survey (TEPS), a longitudinal panel study since the year 2000 (at age 13) and three more waves (at ages 15, 17, and 18). A total of four waves of students' data (N = 4163) are analyzed using the latent growth models. The results indicate that the depressive symptom trajectory of Taiwan adolescents gradually grows in a quadratic curve. Social support in family context rather than school context was associated with depressive symptoms, while only a positive association is found between maternal support and depressive symptoms at the start. Meanwhile, increased extroversion personality is associated with the decreased initial level, increased linear changes, and decreased non-linear quadratic changes of adolescents' depressive symptoms. Further analyses show that a significant interaction between maternal support and extroversion personality is associated with increased non-linear quadratic growth curve of adolescents' depressive symptoms. In conclusion, adolescents' extroversion personality might moderate the effect of maternal support on developmental trajectory of depressive symptoms. Intervention that improves social support should take account for adolescent's personality, which may alter trajectory of psychological distress during adolescence. Copyright © 2016 Elsevier Ltd. All rights reserved.

Using Panel Vendors for Recruitment Into a Web-Based Family Prevention Program: Methodological Considerations.

PubMed

Wang-Schweig, Meme; Miller, Brenda A; Buller, David B; Byrnes, Hilary F; Bourdeau, Beth; Rogers, Veronica

2017-01-01

Use of online panel vendors in research has grown over the past decade. Panel vendors are organizations that recruit participants into a panel to take part in web-based surveys and match panelists to a target audience for data collection. We used two panel vendors to recruit families ( N = 411) with a 16- to 17-year-old teen to participate in a randomized control trial (RCT) of an online family-based program to prevent underage drinking and risky sexual behaviors. Our article addresses the following research questions: (1) How well do panel vendors provide a sample of families who meet our inclusion criteria to participate in a RCT? (2) How well do panel vendors provide a sample of families who reflect the characteristics of the general population? and (3) Does the choice of vendor influence the characteristics of families that we engage in research? Despite the screening techniques used by the panel vendors to identify families who met our inclusion criteria, 23.8% were found ineligible when research staff verified their eligibility by direct telephone contact. Compared to the general U.S. population, our sample had more Whites and more families with higher education levels. Finally, across the two panel vendors, there were no significant differences in the characteristics of families, except for mean age. The online environment provides opportunities for new methods to recruit participants in research studies. However, innovative recruitment methods need careful study to ensure the quality of their samples.

Holographic evaluation of fatigue cracks by a compressive stress (HYSTERESIS) technique

NASA Technical Reports Server (NTRS)

Freska, S. A.; Rummel, W. D.

1974-01-01

Holographic interferometry compares unknown field of optical waves with known one. Differences are displayed as interference bands or fringes. Technique was evaluated on fatigue-cracked 2219-T87 aluminum-alloy panels. Small cracks were detected when specimen was incrementally unloaded.

Modeling of Dynamic Behavior of Carbon Fiber-Reinforced Polymer (CFRP) Composite under X-ray Radiation.

PubMed

Zhang, Kun; Tang, Wenhui; Fu, Kunkun

2018-01-16

Carbon fiber-reinforced polymer (CFRP) composites have been increasingly used in spacecraft applications. Spacecraft may encounter highenergy-density X-ray radiation in outer space that can cause severe damage. To protect spacecraft from such unexpected damage, it is essential to predict the dynamic behavior of CFRP composites under X-ray radiation. In this study, we developed an in-house three-dimensional explicit finite element (FEM) code to investigate the dynamic responses of CFRP composite under X-ray radiation for the first time, by incorporating a modified PUFF equation-of-state. First, the blow-off impulse (BOI) momentum of an aluminum panel was predicted by our FEM code and compared with an existing radiation experiment. Then, the FEM code was utilized to determine the dynamic behavior of a CFRP composite under various radiation conditions. It was found that the numerical result was comparable with the experimental one. Furthermore, the CFRP composite was more effective than the aluminum panel in reducing radiation-induced pressure and BOI momentum. The numerical results also revealed that a 1 keV X-ray led to vaporization of surface materials and a high-magnitude compressive stress wave, whereas a low-magnitude stress wave was generated with no surface vaporization when a 3 keV X-ray was applied.

Modeling of Dynamic Behavior of Carbon Fiber-Reinforced Polymer (CFRP) Composite under X-ray Radiation

PubMed Central

Zhang, Kun; Tang, Wenhui; Fu, Kunkun

2018-01-01

Carbon fiber-reinforced polymer (CFRP) composites have been increasingly used in spacecraft applications. Spacecraft may encounter highenergy-density X-ray radiation in outer space that can cause severe damage. To protect spacecraft from such unexpected damage, it is essential to predict the dynamic behavior of CFRP composites under X-ray radiation. In this study, we developed an in-house three-dimensional explicit finite element (FEM) code to investigate the dynamic responses of CFRP composite under X-ray radiation for the first time, by incorporating a modified PUFF equation-of-state. First, the blow-off impulse (BOI) momentum of an aluminum panel was predicted by our FEM code and compared with an existing radiation experiment. Then, the FEM code was utilized to determine the dynamic behavior of a CFRP composite under various radiation conditions. It was found that the numerical result was comparable with the experimental one. Furthermore, the CFRP composite was more effective than the aluminum panel in reducing radiation-induced pressure and BOI momentum. The numerical results also revealed that a 1 keV X-ray led to vaporization of surface materials and a high-magnitude compressive stress wave, whereas a low-magnitude stress wave was generated with no surface vaporization when a 3 keV X-ray was applied. PMID:29337891

Simplified Calculation Model and Experimental Study of Latticed Concrete-Gypsum Composite Panels

PubMed Central

Jiang, Nan; Ma, Shaochun

2015-01-01

In order to address the performance complexity of the various constituent materials of (dense-column) latticed concrete-gypsum composite panels and the difficulty in the determination of the various elastic constants, this paper presented a detailed structural analysis of the (dense-column) latticed concrete-gypsum composite panel and proposed a feasible technical solution to simplified calculation. In conformity with mechanical rules, a typical panel element was selected and divided into two homogenous composite sub-elements and a secondary homogenous element, respectively for solution, thus establishing an equivalence of the composite panel to a simple homogenous panel and obtaining the effective formulas for calculating the various elastic constants. Finally, the calculation results and the experimental results were compared, which revealed that the calculation method was correct and reliable and could meet the calculation needs of practical engineering and provide a theoretical basis for simplified calculation for studies on composite panel elements and structures as well as a reference for calculations of other panels. PMID:28793631

Simplified Calculation Model and Experimental Study of Latticed Concrete-Gypsum Composite Panels.

PubMed

Jiang, Nan; Ma, Shaochun

2015-10-27

In order to address the performance complexity of the various constituent materials of (dense-column) latticed concrete-gypsum composite panels and the difficulty in the determination of the various elastic constants, this paper presented a detailed structural analysis of the (dense-column) latticed concrete-gypsum composite panel and proposed a feasible technical solution to simplified calculation. In conformity with mechanical rules, a typical panel element was selected and divided into two homogenous composite sub-elements and a secondary homogenous element, respectively for solution, thus establishing an equivalence of the composite panel to a simple homogenous panel and obtaining the effective formulas for calculating the various elastic constants. Finally, the calculation results and the experimental results were compared, which revealed that the calculation method was correct and reliable and could meet the calculation needs of practical engineering and provide a theoretical basis for simplified calculation for studies on composite panel elements and structures as well as a reference for calculations of other panels.

MASS CONCENTRATION RELATIONSHIPS FROM THE NERL RTP PARTICULATE MATTER PANEL STUDY

EPA Science Inventory

The National Exposure Research Laboratory's (NERL) Research Triangle Park (RTP) Particulate Matter (PM) Panel Study has completed a one-year investigation of personal, residential and ambient PM-related mass concentrations in two potentially susceptible subpopulations. PM2.5, P...

Real-time Cure Monitoring of Composites Using a Guided wave-based System with High Temperature Piezoelectric Transducers, Fiber Bragg Gratings, and Phase-shifted Fiber Bragg Gratings

NASA Astrophysics Data System (ADS)

Hudson, Tyler Blake

An in-process, in-situ cure monitoring technique utilizing a guided wave-based concept for carbon fiber reinforced polymer (CFRP) composites was investigated. Two automated cure monitoring systems using guided-wave ultrasonics were developed for characterizing the state of the cure. In the first system, surface mounted high-temperature piezoelectric transducer arrays were employed for actuation and sensing. The second system motivated by the success of the first system includes a single piezoelectric disc, bonded onto the surface of the composite for excitation; fiber Bragg gratings (FBGs) and/or phase-shifted fiber Bragg gratings (PSFBGs) were embedded in the composite for distributed cure sensing. Composite material properties (viscosity and degree of cure) evolved during cure of the panels fabricated from HexcelRTM IM7/8552 prepreg correlated well to the amplitude, time of arrival, and group velocity of the guided wave-based measurements during the cure cycle. In addition, key phase transitions (gelation and vitrification) were clearly identified from the experimental data during the same cure cycle. The material properties and phase transitions were validated using cure process modeling software (e.g., RAVENRTM). The high-temperature piezoelectric transducer array system demonstrated the feasibility of a guided wave-based, in-process, cure monitoring and provided the framework for defect detection during cure. Ultimately, this system could provide a traceable data stream for non-compliance investigations during serial production and perform closed-loop process control to maximize composite panel quality and consistency. In addition, this system could be deployed as a "smart" caul/tool plate to existing production lines without changing the design of the aircraft/structure. With the second system, strain in low frequency (quasi-static) and the guided wavebased signals in several hundred kilohertz range were measured almost simultaneously using the same FBG or PS-FBG throughout the cure cycle. Also, the residual strain can be readily determined at the end of the cure. This system demonstrated a real-time, in-situ, cure monitoring system using embedded multiplexed FBG/PS-FBG sensors to record both guided wave-based signals and strain. The distinct advantages of a fiber optic-based system include multiplexing, small size, embedding, utilization in harsh environments, electrically passive operation, and electromagnetic interference (EMI) immunity. The embedded multiplexed FBG/PS-FBG fiber optic sensor can monitor the entire life-cycle of the composite structure from curing, post-cure/assembly, and in-service for creating "smart structures".

Linking Magazine Exposure to Social Appearance Anxiety: The Role of Appearance Norms in Early Adolescence.

PubMed

Trekels, Jolien; Eggermont, Steven

2017-12-01

Early adolescents (N = 1,591; M age  = 11.698; SD = 0.892) participated in a two-wave panel study (6-month interval) to examine the longitudinal association between appearance-focused magazine exposure and social appearance anxiety. We revealed that magazine exposure positively correlated with the internalization of appearance ideals and the attribution of social rewards to attractiveness which, in turn, related to social appearance anxiety. Internalization and attribution of social rewards formed a reinforcing spiral; once internalized, early adolescents associate positive things with appearance ideals (e.g., peer acceptance) and the perception of rewards increases early adolescents' inclination to internalize ideals. Given the adverse consequences of social appearance anxiety, the findings warrant research on the role of media in the occurrence of social appearance anxiety. © 2017 The Authors. Journal of Research on Adolescence © 2017 Society for Research on Adolescence.

Justification bias in self-reported disability: New evidence from panel data.

PubMed

Black, Nicole; Johnston, David W; Suziedelyte, Agne

2017-07-01

The relationship between health and work is frequently investigated using self-assessments of disability from social surveys. The complication is that respondents may overstate their level of disability to justify non-employment and welfare receipt. This study provides new evidence on the existence and magnitude of justification bias by exploiting a novel feature of a large longitudinal survey: each wave respondents are asked identical disability questions twice; near the beginning and end of the face-to-face interview. Prior to answering the second disability question, respondents are asked a series of questions that increase the salience of their employment and welfare circumstances. Justification bias is identified by comparing the variation between the two measures within-individuals over time, with the variation in employment status over time. Results indicate substantial and statistically significant justification bias; especially for men and women who receive disability pensions. Copyright © 2017 Elsevier B.V. All rights reserved.

The Causal Ordering of Prominence and Salience in Identity Theory: An Empirical Examination

PubMed Central

Brenner, Philip S.; Serpe, Richard T.; Stryker, Sheldon

2016-01-01

Identity theory invokes two distinct but related concepts, identity salience and prominence, to explain how the organization of identities that make up the self impacts the probability that a given identity is situationally enacted. However, much extant research has failed to clearly distinguish between salience and prominence, and their empirical relationship has not been adequately investigated, impeding a solid understanding of the significance and role of each in a general theory of the self. This study examines their causal ordering using three waves of panel data from 48 universities focusing on respondents’ identities as science students. Analyses strongly support a causal ordering from prominence to salience. We provide theoretical and empirical grounds to justify this ordering while acknowledging potential variation in its strength across identities. Finally, we offer recommendations about the use of prominence and salience when measures of one or both are available or when analyses use cross-sectional data. PMID:27284212

Domain decomposition and matching for time-domain analysis of motions of ships advancing in head sea

NASA Astrophysics Data System (ADS)

Tang, Kai; Zhu, Ren-chuan; Miao, Guo-ping; Fan, Ju

2014-08-01

A domain decomposition and matching method in the time-domain is outlined for simulating the motions of ships advancing in waves. The flow field is decomposed into inner and outer domains by an imaginary control surface, and the Rankine source method is applied to the inner domain while the transient Green function method is used in the outer domain. Two initial boundary value problems are matched on the control surface. The corresponding numerical codes are developed, and the added masses, wave exciting forces and ship motions advancing in head sea for Series 60 ship and S175 containership, are presented and verified. A good agreement has been obtained when the numerical results are compared with the experimental data and other references. It shows that the present method is more efficient because of the panel discretization only in the inner domain during the numerical calculation, and good numerical stability is proved to avoid divergence problem regarding ships with flare.

Dynamics of Work Disability and Pain

PubMed Central

Kapteyn, Arie; Smith, James P.; van Soest, Arthur

2013-01-01

This paper investigates the role of pain in affecting self-reported work disability and employment of elderly workers in the US. We investigate pain and its relationship to work disability and work in a dynamic panel data model, using six biennial waves from the Health and Retirement Study. We find the dynamics of the presence of pain is central to understanding the dynamics of self-reported work disability. By affecting work disability pain also has important implications for the dynamic patterns of employment. PMID:18180063

P-wave dispersion and maximum duration are independently associated with insulin resistance in metabolic syndrome.

PubMed

Wang, Weiwei; Zhang, Feilong; Xhen, Jianhua; Chen, Xuehai; Fu, Fayuan; Tang, Mirong; Chen, Lianglong

2014-07-01

Metabolic syndrome (MS) is an important risk factor for atrial fibrillation. P-wave indices, including P-wave dispersion (PWD) and P-wave duration, can be used as non-invasive markers of heterogeneous atrial conduction. The aim of our study was to evaluate the relationship between P-wave indices and insulin resistance in patients with MS. Seventy-four patients with MS (44 men, 30 women) and 81 patients without MS (48 men, 33 women) were enrolled in the study. A diagnosis of MS was made as defined by the Adult Treatment Panel III of the National Cholesterol Education Program. Insulin resistance was estimated using the homeostasis model assessment (HOMA) index. P-wave maximum duration (Pmax) and P-wave minimum duration (Pmin) were calculated on a 12-lead electrocardiogram, and the difference between the Pmax and the Pmin was defined as PWD. Patients with MS had a longer PWD and a higher Pmax compared with patients without MS (PWD, 35.65±4.36 vs. 26.27±4.04, P<0.001; Pmax, 117.12±10.77 vs. 105.98±9.02, P<0.001), whereas no difference was found between Pmin values from MS patients and controls (81.47±9.54 vs. 79.70±8.76, P=0.231). Stepwise multivariate analysis revealed only the HOMA index to be an independent predictor of PWD (β=3.115, P<0.001) and Pmax (β=7.175, P<0.001). This study suggests that patients with MS have a prolonged PWD and Pmax. The increase in these parameters may be an indicator for identification of patients at an increased risk for atrial fibrillation. Copyright © 2014. Published by Elsevier Masson SAS.

Active control of aircraft engine inlet noise using compact sound sources and distributed error sensors

NASA Technical Reports Server (NTRS)

Burdisso, Ricardo (Inventor); Fuller, Chris R. (Inventor); O'Brien, Walter F. (Inventor); Thomas, Russell H. (Inventor); Dungan, Mary E. (Inventor)

1996-01-01

An active noise control system using a compact sound source is effective to reduce aircraft engine duct noise. The fan noise from a turbofan engine is controlled using an adaptive filtered-x LMS algorithm. Single multi channel control systems are used to control the fan blade passage frequency (BPF) tone and the BPF tone and the first harmonic of the BPF tone for a plane wave excitation. A multi channel control system is used to control any spinning mode. The multi channel control system to control both fan tones and a high pressure compressor BPF tone simultaneously. In order to make active control of turbofan inlet noise a viable technology, a compact sound source is employed to generate the control field. This control field sound source consists of an array of identical thin, cylindrically curved panels with an inner radius of curvature corresponding to that of the engine inlet. These panels are flush mounted inside the inlet duct and sealed on all edges to prevent leakage around the panel and to minimize the aerodynamic losses created by the addition of the panels. Each panel is driven by one or more piezoelectric force transducers mounted on the surface of the panel. The response of the panel to excitation is maximized when it is driven at its resonance; therefore, the panel is designed such that its fundamental frequency is near the tone to be canceled, typically 2000-4000 Hz.

Active control of aircraft engine inlet noise using compact sound sources and distributed error sensors

NASA Technical Reports Server (NTRS)

Burdisso, Ricardo (Inventor); Fuller, Chris R. (Inventor); O'Brien, Walter F. (Inventor); Thomas, Russell H. (Inventor); Dungan, Mary E. (Inventor)

1994-01-01

An active noise control system using a compact sound source is effective to reduce aircraft engine duct noise. The fan noise from a turbofan engine is controlled using an adaptive filtered-x LMS algorithm. Single multi channel control systems are used to control the fan blade passage frequency (BPF) tone and the BPF tone and the first harmonic of the BPF tone for a plane wave excitation. A multi channel control system is used to control any spinning mode. The multi channel control system to control both fan tones and a high pressure compressor BPF tone simultaneously. In order to make active control of turbofan inlet noise a viable technology, a compact sound source is employed to generate the control field. This control field sound source consists of an array of identical thin, cylindrically curved panels with an inner radius of curvature corresponding to that of the engine inlet. These panels are flush mounted inside the inlet duct and sealed on all edges to prevent leakage around the panel and to minimize the aerodynamic losses created by the addition of the panels. Each panel is driven by one or more piezoelectric force transducers mounted on the surface of the panel. The response of the panel to excitation is maximized when it is driven at its resonance; therefore, the panel is designed such that its fundamental frequency is near the tone to be canceled, typically 2000-4000 Hz.

Music video viewing as a marker of driving after the consumption of alcohol.

PubMed

Beullens, Kathleen; Roe, Keith; Van den Bulck, Jan

2012-01-01

This study has two main objectives. First, it is examined whether the frequent exposure to music video viewing is associated with driving after the consumption of alcohol. Second, it is examined which theoretical framework, a combination of Cultivation Theory and the Theory of Planned Behavior or the Problem Behavior Theory, is suited best to explain this relationship. Participants were 426 Flemish adolescents who took part in a two-wave panel survey (2006-2008) about media use, risk-taking attitudes, intentions, and behaviors. In line with Cultivation Theory and the Theory of Planned Behavior, the results showed that adolescents' music video viewing is a significant marker of later risky driving behavior and that this relationship is mediated through their attitudes and intentions. No support was found for the hypothesis that music video viewing is part of a cluster of problem behaviors (Problem Behavior Theory). Thus, the results of this study seem to indicate that a combination of Cultivation Theory and the Theory of Planned Behavior provides a more useful framework for explaining the relationship between music video viewing and driving after the consumption of alcohol. The implications for prevention and the study's limitations are discussed.

Behavior of Frame-Stiffened Composite Panels with Damage

NASA Technical Reports Server (NTRS)

Jegley, Dawn C.

2013-01-01

NASA, the Air Force Research Laboratory and The Boeing Company have worked to develop new low-cost, light-weight composite structures for aircraft. A Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) concept has been developed which offers advantages over traditional metallic structures. In this concept, a stitched carbon-epoxy material system has been developed with the potential for reducing the weight and cost of transport aircraft structure by eliminating fasteners, thereby reducing part count and labor. Stitching and the use of thin skins with rod-stiffeners to move loading away from the morevulnerable outer surface produces a structurally efficient, damage tolerant design. This study focuses on the behavior of PRSEUS panels loaded in the frame direction and subjected to severe damage in the form of a severed central frame in a three-frame panel. Experimental results for a pristine two-frame panel and analytical predictions for pristine two-frame and three-frame panels as well as damaged three-frame panels are described.

A comparison of response rates in the English Longitudinal Study of Ageing and the Health and Retirement Study

PubMed Central

Cheshire, Hayley; Ofstedal, Mary Beth; Scholes, Shaun; Schroeder, Mathis

2013-01-01

Survey response rates are an important measure of the quality of a survey; this is true for both longitudinal and cross-sectional surveys. However, the concept of a response rate in the context of a panel survey is more complex than is the case for a cross-sectional survey. There are typically many different response rates that can be calculated for a panel survey, each of which may be relevant for a specific purpose. The main objective of our paper is to document and compare response rates for two long-term panel studies of ageing, the English Longitudinal Study of Ageing (ELSA) and the Health and Retirement Study (HRS) in the United States. To guide our selection and calculation of response rates for the two studies, we use a framework that was developed by Peter Lynn (2005) and present several different types of longitudinal response rates for the two surveys. We discuss similarities and differences in the study designs and protocols and how some of the differences affect comparisons of response rates across the two studies. PMID:24432049

Millimeter Wave Holographical Inspection of Honeycomb Composites

NASA Technical Reports Server (NTRS)

Case, J. T.; Kharkovsky, S.; Zoughi, R.; Stefes, G.; Hepburn, Frank L.; Hepburn, Frank L.

2007-01-01

Multi-layered composite structures manufactured with honeycomb, foam or balsa wood cores are finding increasing utility in a variety of aerospace, transportation, and infrastructure applications. Due to the low conductivity and inhomogeneity associated with these composites standard nondestructive testing (NDT) methods are not always capable of inspecting their interior for various defects caused during the manufacturing process or as a result of in-service loading. On the contrary, microwave and millimeter wave NDT methods are well-suited for inspecting these structures since signals at these frequencies readily penetrate through these structures and reflect from different interior boundaries revealing the presence of a wide range of defects such as disbond, delamination, moisture and oil intrusion, impact damage, etc. Millimeter wave frequency spectrum spans 30 GHz - 300 GHz with corresponding wavelengths of 10 - 1 mm. Due to the inherent short wavelengths at these frequencies, one can produce high spatial resolution images of these composites either using real-antenna focused or synthetic-aperture focused methods. In addition, incorporation of swept-frequency in the latter method (i.e., holography) results in high-resolution three-dimensional images. This paper presents the basic steps behind producing such images at millimeter wave frequencies and the results of two honeycomb composite panels are demonstrated at Q-band (33-50 GHz). In addition, these results are compared to previous results using X-ray computed tomography.

Experimental evaluation and analysis of methane fire and explosion mitigation using isolation valves integrated with a vent system.

PubMed

Ajrash, Mohammed J; Zanganeh, Jafar; Moghtaderi, Behdad

2017-10-05

There has been a surge of interest from the extractive industries in the application of mechanical means to the mitigation of flame deflagration. To verify the implementation and performance of passive and active mitigation protection, a comprehensive experimental investigation has been conducted on a large scale detonation tube, 30m long and 0.5m in diameter, with two mitigation valves (passive and active) and a burst panel venting system. The valves were used alternately to mitigate the flame deflagration of methane in concentrations ranging from 1.25% to 7.5%. The experimental work revealed that locating the passive mitigation valve at 22m distance from the ignition source mitigates the flame by fully isolating the tube. However, closing the valve structure in the axial direction generated another pressure wave upstream, which was approximately the same value as for the original pressure wave upstream. In the case of the active mitigation system, the system perfectly isolated upstream from downstream with no further pressure wave generation. When the vent was located at 6.5m from the ignition source, the total pressure was reduced by 0.48bar. Due to the counter flow of the reflected pressure wave the flame was extinguished at 12.5m from the ignition source. Copyright © 2017 Elsevier B.V. All rights reserved.

Millimeter Wave Holographical Inspection of Honeycomb Composites

NASA Astrophysics Data System (ADS)

Case, J. T.; Kharkovsky, S.; Zoughi, R.; Steffes, G.; Hepburn, F. L.

2008-02-01

Multi-layered composite structures manufactured with honeycomb, foam, or balsa wood cores are finding increasing utility in a variety of aerospace, transportation, and infrastructure applications. Due to the low conductivity and inhomogeneity associated with these composites, standard nondestructive testing (NDT) methods are not always capable of inspecting their interior for various defects caused during the manufacturing process or as a result of in-service loading. On the contrary, microwave and millimeter wave NDT methods are well-suited for inspecting these structures since signals at these frequencies readily penetrate through these structures and reflect from different interior boundaries revealing the presence of a wide range of defects such as isband, delamination, moisture and oil intrusion, impact damage, etc. Millimeter wave frequency spectrum spans 30 GHz-300 GHz with corresponding wavelengths of 10-1 mm. Due to the inherent short wavelengths at these frequencies, one can produce high spatial resolution images of these composites either using real-antenna focused or synthetic-aperture focused methods. In addition, incorporation of swept-frequency in the latter method (i.e., holography) results in high-resolution three-dimensional images. This paper presents the basic steps behind producing such images at millimeter wave frequencies and the results of two honeycomb composite panels are demonstrated at Q-band (33-50 GHz). In addition, these results are compared to previous results using X-ray computed tomography.

Changing consumer attitudes to energy efficiency: Midterm results from an advertising campaign

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peters, J.S.; Seiden, K.; Baggett, S.

As utilities move away from rebates and incentives, many choose to use educational campaigns as a means to continue energy efficiency acquisition efforts. Measuring these effects is difficult and has long been considered nearly impossible by many in the evaluation community. Given the difficulty of observing behavior changes associated with education campaigns, this project sought to measure the likelihood that consumers exposed to a campaign will take the action. A model of behavior change, the theory of planned behavior developed by Icek Ajzen demonstrates that such is possible. This paper reports on the results of a longitudinal panel study ofmore » an energy efficiency mass-market educational campaign, using the Ajzen model with results from a five-wave survey of 1,200 targeted consumers and a control group of 1,200. The first wave collected pre-campaign data in Spring 1997. The authors compare these baseline data with data collected from the second and third survey waves, which were performed in Fall 1997 and Spring 1998, respectively.« less

Mode 1 and Mode 2 Analysis of Graphite/Epoxy Composites Using Double Cantilever Beam and End-Notched Flexure Tests

NASA Technical Reports Server (NTRS)

Hufnagel, Kathleen P.

1995-01-01

The critical strain energy release rates associated with debonding of the adhesive bondlines in graphite/epoxy IM6/3501-6 interlaminar fracture specimens were investigated. Two panels were manufactured for this investigation; however, panel two was layed-up incorrectly. As a result, data collected from Panel Two serves no real purpose in this investigation. Double Cantilever Beam (DCB) specimens were used to determine the opening Mode I interlaminar fracture toughness, G1(sub c), of uni-directional fiber re-inforced composites. The five specimens tested from Panel One had an average value of 946.42J/sq m for G1(sub c) with an acceptable coefficient of variation. The critical strain energy release rate, G2(sub c), for initiation of delamination under inplane shear loading was investigated using the End-Notched Flexure (ENF) Test. Four specimens were tested from Panel One and an average value of 584.98J/sq m for G2(sub c) was calculated. Calculations from the DCB and ENF test results for Panel One represent typical values of G1(sub c) and G2(sub c) for the adhesive debonding in the material studied in this investigation.

Transient Thermal Testing and Analysis of a Thermally Insulating Structural Sandwich Panel

NASA Technical Reports Server (NTRS)

Blosser, Max L.; Daryabeigi, Kamran; Bird, Richard K.; Knutson, Jeffrey R.

2015-01-01

A core configuration was devised for a thermally insulating structural sandwich panel. Two titanium prototype panels were constructed to illustrate the proposed sandwich panel geometry. The core of one of the titanium panels was filled with Saffil(trademark) alumina fibrous insulation and the panel was tested in a series of transient thermal tests. Finite element analysis was used to predict the thermal response of the panel using one- and two-dimensional models. Excellent agreement was obtained between predicted and measured temperature histories.

And justice for all: Examining corruption as a contextual source of mental illness.

PubMed

van Deurzen, Ioana

2017-01-01

In the present study, I focus on the relationship between corruption and mental health as measured by the level of depressive symptoms. I use data collected by the European Social Survey in 2006, 2012 and 2014 from 99,159 individuals that lived in 24 European countries. I employ two types of analyses: static analyses, i.e., multilevel models estimated in each wave, and dynamic analyses, i.e., fixed effects models for pseudo-panel data. Both static and dynamic analyses suggested that corruption had a detrimental effect on mental health. However, the results were not robust in models where the country's wealth was accounted for. Furthermore, this study presents evidence that the level of societal corruption is detrimental especially for the mental health of religious persons and individuals that experience material adversity. Regarding a potentially different effect of corruption on mental health between western and eastern European countries, no significant differences were found. Copyright © 2016 Elsevier Ltd. All rights reserved.

Transitions between states of labor-force participation among older Israelis.

PubMed

Achdut, Leah; Tur-Sinai, Aviad; Troitsky, Rita

2015-03-01

The study examines the labor-force behavior of Israelis at older ages, focusing on the determinants of the transitions between states of labor-force participation between 2005 and 2010. The study uses panel data from the first two waves of the SHARE-Israel longitudinal survey. A multinomial logit model is used to examine the impact of sociodemographic characteristics, health state, and economic resources on labor-force transitions of people aged 50-67. The results emphasize the role of age and poor health in "pushing" older people out of the labor force or "keeping" them there. Spouse's participation is found to encourage individuals to leave the labor force or to refrain from joining it. However, living with a participating spouse is negatively associated with staying out of the labor force, consistent with the dominance of the complementarity of leisure effect found in the literature. Wealth as an economic resource available to individuals for retirement is also found to encourage individuals to leave the labor force or to refrain from joining it.

Does distraction facilitate problem-focused coping with job stress? A 1 year longitudinal study.

PubMed

Shimazu, Akihito; Schaufeli, Wilmar B

2007-10-01

This study examined the sole and combined effects of problem-focused coping and distraction on employee well-being (i.e., stress responses and job performance) using two-wave panel survey data with a 1-year time lag. Participants were 488 male employees, who worked for a construction machinery company in western Japan. Hierarchical multiple regression analyses were conducted to examine whether distraction moderates the relationship of problem-focused coping with well-being. More use of problem-focused coping was negatively related to subsequent stress responses among those high in distraction. The combination of high problem-focused coping and high distraction was positively related to subsequent job performance, although it was limited only to the high job stress situation. Results suggest that the combination of high problem-focused coping and high distraction may lead to lower stress responses and better performance (but only in high job stress situations for performance) than the combination of high problem-focused coping and low distraction, at least for male blue-collar workers.

The Relationship Between Sexual Content on Mass Media and Social Media: A Longitudinal Study.

PubMed

Vandenbosch, Laura; van Oosten, Johanna M F; Peter, Jochen

2015-12-01

The goal of this study was to investigate whether exposure to sexual reality television content and Internet pornography (IP) is related to sexual self-presentation on social media. Based on a two-wave panel survey among 1,765 adolescents aged 13-17 years, we found that watching sexual reality television content stimulated adolescents to produce and distribute sexual images of themselves on social media. In turn, sexual self-presentation on social media led adolescents to watch sexual reality television content more frequently. These relationships were similar among boys and girls. No reciprocal relationship between exposure to IP and boys' and girls' sexual self-presentation on social media was found. The results suggest that sexual content in mainstream mass media may predict adolescents' sexually oriented behavior on social media and vice versa. Moreover, adolescents seem to differentiate between types of sexual content (i.e., mainstream versus more explicit sexual content) when incorporating sexual media content in their sexual behavior online.

Religiousness, spiritual seeking, and personality: findings from a longitudinal study.

PubMed

Wink, Paul; Ciciolla, Lucia; Dillon, Michele; Tracy, Allison

2007-10-01

The hypothesis that personality characteristics in adolescence can be used to predict religiousness and spiritual seeking in late adulthood was tested using a structural equation modeling framework to estimate cross-lagged and autoregressive effects in a two-wave panel design. The sample consisted of 209 men and women participants in the Berkeley Guidance and Oakland Growth studies. In late adulthood, religiousness was positively related to Conscientiousness and Agreeableness, and spiritual seeking was related to Openness to Experience. Longitudinal models indicated that Conscientiousness in adolescence significantly predicted religiousness in late adulthood above and beyond adolescent religiousness. Similarly, Openness in adolescence predicted spiritual seeking in late adulthood. The converse effect, adolescent religiousness to personality in late adulthood, was not significant in either model. Among women, adolescent Agreeableness predicted late-life religiousness and adolescent religiousness predicted late-life Agreeableness; both these effects were absent among men. Adolescent personality appears to shape late-life religiousness and spiritual seeking independent of early religious socialization.

Surface Acoustic Wave Vibration Sensors for Measuring Aircraft Flutter

NASA Technical Reports Server (NTRS)

Wilson, William C.; Moore, Jason P.; Juarez, Peter D.

2016-01-01

Under NASA's Advanced Air Vehicles Program the Advanced Air Transport Technology (AATT) Project is investigating flutter effects on aeroelastic wings. To support that work a new method for measuring vibrations due to flutter has been developed. The method employs low power Surface Acoustic Wave (SAW) sensors. To demonstrate the ability of the SAW sensor to detect flutter vibrations the sensors were attached to a Carbon fiber-reinforced polymer (CFRP) composite panel which was vibrated at six frequencies from 1Hz to 50Hz. The SAW data was compared to accelerometer data and was found to resemble sine waves and match each other closely. The SAW module design and results from the tests are presented here.

The effects of solar radiation and black body re-radiation on thermal comfort.

PubMed

Hodder, Simon; Parsons, Ken

2008-04-01

When the sun shines on people in enclosed spaces, such as in buildings or vehicles, it directly affects thermal comfort. There is also an indirect effect as surrounding surfaces are heated exposing a person to re-radiation. This laboratory study investigated the effects of long wave re-radiation on thermal comfort, individually and when combined with direct solar radiation. Nine male participants (26.0 +/- 4.7 years) took part in three experimental sessions where they were exposed to radiation from a hot black panel heated to 100 degrees C; direct simulated solar radiation of 600 Wm(-2) and the combined simulated solar radiation and black panel radiation. Exposures were for 30 min, during which subjective responses and mean skin temperatures were recorded. The results showed that, at a surface temperature of 100 degrees C (close to maximum in practice), radiation from the flat black panel provided thermal discomfort but that this was relatively small when compared with the effects of direct solar radiation. It was concluded that re-radiation, from a dashboard in a vehicle, for example, will not have a major direct influence on thermal comfort and that existing models of thermal comfort do not require a specific modification. These results showed that, for the conditions investigated, the addition of re-radiation from internal components has an effect on thermal sensation when combined with direct solar radiation. However, it is not considered that it will be a major factor in a real world situation. This is because, in practice, dashboards are unlikely to maintain very high surface temperatures in vehicles without an unacceptably high air temperature. This study quantifies the contribution of short- and long-wave radiation to thermal comfort. The results will aid vehicle designers to have a better understanding of the complex radiation environment. These include direct radiation from the sun as well as re-radiation from the dashboard and other internal surfaces.

Bid opening report : Federal-aid highway construction contracts : first six months 1999

DOT National Transportation Integrated Search

1996-05-01

This second volume of the draft final report focuses on specialized travel trends in the Puget Sound panel data from 1989 through 1993. Trips were catagorized by purpose and mode, with each trip of each wave characterized by three variables: total tr...

Trajectories of Marijuana Use During the Transition to Adulthood: The Big Picture Based on National Panel Data

PubMed Central

Schulenberg, John E.; Merline, Alicia C.; Johnston, Lloyd D.; O'Malley, Patrick M.; Bachman, Jerald G.; Laetz, Virginia B.

2005-01-01

The purposes of this study were to: a) identify trajectory groups of frequent marijuana use during emerging adulthood, b) distinguish among trajectory groups according to demographic and lifestyle characteristics, and c) examine how the trajectory groups relate to behavioral, attitudinal, and social-emotional correlates over time. National panel data from the Monitoring the Future study were used: 18 cohorts of high school seniors (classes of 1977-94) were followed biennially through age 24. Frequent marijuana use was defined as 3+ occasions of use in past month and/or 20 to 40+ occasions in past year. Based on four waves of complete longitudinal data (N=19,952), six frequent marijuana use trajectory groups were identified: chronic, decreased, increased, fling, rare, and abstain. Categorical analyses revealed trajectory group differences in demographic and lifestyle characteristics at senior year and age 24. The trajectory groups varied significantly in longitudinal patterns of other substance use, problem behaviors, and well-being. PMID:16534532

Health and Wealth of Elderly Couples: Causality Tests Using Dynamic Panel Data Models*

PubMed Central

Michaud, Pierre-Carl; van Soest, Arthur

2010-01-01

A positive relationship between socio-economic status (SES) and health, the “health-wealth gradient”, is repeatedly found in many industrialized countries. This study analyzes competing explanations for this gradient: causal effects from health to wealth (health causation) and causal effects from wealth to health (wealth or social causation). Using six biennial waves of couples aged 51–61 in 1992 from the U.S. Health and Retirement Study, we test for causality in panel data models incorporating unobserved heterogeneity and a lag structure supported by specification tests. In contrast to tests relying on models with only first order lags or without unobserved heterogeneity, these tests provide no evidence of causal wealth health effects. On the other hand, we find strong evidence of causal effects from both spouses’ health on household wealth. We also find an effect of the husband’s health on the wife’s mental health, but no other effects from one spouse’s health to health of the other spouse. PMID:18513809

The relationship between air pollution, fossil fuel energy consumption, and water resources in the panel of selected Asia-Pacific countries.

PubMed

Rafindadi, Abdulkadir Abdulrashid; Yusof, Zarinah; Zaman, Khalid; Kyophilavong, Phouphet; Akhmat, Ghulam

2014-10-01

The objective of the study is to examine the relationship between air pollution, fossil fuel energy consumption, water resources, and natural resource rents in the panel of selected Asia-Pacific countries, over a period of 1975-2012. The study includes number of variables in the model for robust analysis. The results of cross-sectional analysis show that there is a significant relationship between air pollution, energy consumption, and water productivity in the individual countries of Asia-Pacific. However, the results of each country vary according to the time invariant shocks. For this purpose, the study employed the panel least square technique which includes the panel least square regression, panel fixed effect regression, and panel two-stage least square regression. In general, all the panel tests indicate that there is a significant and positive relationship between air pollution, energy consumption, and water resources in the region. The fossil fuel energy consumption has a major dominating impact on the changes in the air pollution in the region.

Responses to positive affect, life satisfaction and self-esteem: A cross-lagged panel analysis during middle adolescence.

PubMed

Gomez-Baya, Diego; Mendoza, Ramon; Gaspar, Tania; Gomes, Paulo

2018-05-11

During middle adolescence, elevated stress and a greater presence of psychological disorders have been documented. The research has paid little attention to the regulation of positive affective states. Fredrickson's broaden-and-build theory suggests that cultivating positive emotions helps to build resources that boost well-being. The current research aimed to examine the longitudinal associations between responses to positive affect (emotion-focused positive rumination, self-focused positive rumination, and dampening) and psychological adjustment (self-esteem and life satisfaction) during middle adolescence. A longitudinal study with two waves separated by one year was conducted, assessing 977 adolescents (M = 13.81, SD = 0.79; 51.5% boys) with self-report measures. A cross-lagged panel analysis was performed by including within the same model the relationships between all of the variables in the two assessment points. The results indicated cross-lagged positive relationships of self-focused positive rumination with both self-esteem and life satisfaction, while dampening showed a negative cross-lagged relationship with self-esteem. Moreover, higher self-esteem predicted more emotion-focused positive rumination, and more dampening predicted lower life satisfaction. Thus, the use of adaptive responses to positive affect and a better psychological adjustment were found to be prospectively interrelated at the one-year follow-up during middle adolescence. The discussion argues for the need to implement programmes to promote more adaptive responses to positive affect to enhance psychological adjustment in the adolescent transition to adulthood. © 2018 Scandinavian Psychological Associations and John Wiley & Sons Ltd.

Regression analysis of mixed recurrent-event and panel-count data

PubMed Central

Zhu, Liang; Tong, Xinwei; Sun, Jianguo; Chen, Manhua; Srivastava, Deo Kumar; Leisenring, Wendy; Robison, Leslie L.

2014-01-01

In event history studies concerning recurrent events, two types of data have been extensively discussed. One is recurrent-event data (Cook and Lawless, 2007. The Analysis of Recurrent Event Data. New York: Springer), and the other is panel-count data (Zhao and others, 2010. Nonparametric inference based on panel-count data. Test 20, 1–42). In the former case, all study subjects are monitored continuously; thus, complete information is available for the underlying recurrent-event processes of interest. In the latter case, study subjects are monitored periodically; thus, only incomplete information is available for the processes of interest. In reality, however, a third type of data could occur in which some study subjects are monitored continuously, but others are monitored periodically. When this occurs, we have mixed recurrent-event and panel-count data. This paper discusses regression analysis of such mixed data and presents two estimation procedures for the problem. One is a maximum likelihood estimation procedure, and the other is an estimating equation procedure. The asymptotic properties of both resulting estimators of regression parameters are established. Also, the methods are applied to a set of mixed recurrent-event and panel-count data that arose from a Childhood Cancer Survivor Study and motivated this investigation. PMID:24648408

Space shuttle orbit maneuvering engine reusable thrust chamber. Task 13: Subscale helium ingestion and two dimensional heating test report

NASA Technical Reports Server (NTRS)

Tobin, R. D.

1974-01-01

Descriptions are given of the test hardware, facility, procedures, and results of electrically heated tube, channel and panel tests conducted to determine effects of helium ingestion, two dimensional conduction, and plugged coolant channels on operating limits of convectively cooled chambers typical of space shuttle orbit maneuvering engine designs. Helium ingestion in froth form, was studied in tubular and rectangular single channel test sections. Plugged channel simulation was investigated in a three channel panel. Burn-out limits (transition of film boiling) were studied in both single channel and panel test sections to determine 2-D conduction effects as compared to tubular test results.

GASEOUS CO-POLLUTANTS ASSOCIATED WITH PARTICULATE MATTER-RESULTS FROM THE NERL RTP PM PANEL STUDY

EPA Science Inventory

The U.S. EPA National Exposure Research Laboratory (NERL) conducted a longitudinal particulate matter (PM) panel study in Research Triangle Park, NC between June 2000 and June 2001. Participants were selected from two potentially susceptible sub-populations: a multi-racial grou...

Origins of narcissism in children

PubMed Central

Brummelman, Eddie; Thomaes, Sander; Nelemans, Stefanie A.; Orobio de Castro, Bram; Overbeek, Geertjan; Bushman, Brad J.

2015-01-01

Narcissism levels have been increasing among Western youth, and contribute to societal problems such as aggression and violence. The origins of narcissism, however, are not well understood. Here, we report, to our knowledge, the first prospective longitudinal evidence on the origins of narcissism in children. We compared two perspectives: social learning theory (positing that narcissism is cultivated by parental overvaluation) and psychoanalytic theory (positing that narcissism is cultivated by lack of parental warmth). We timed the study in late childhood (ages 7–12), when individual differences in narcissism first emerge. In four 6-mo waves, 565 children and their parents reported child narcissism, child self-esteem, parental overvaluation, and parental warmth. Four-wave cross-lagged panel models were conducted. Results support social learning theory and contradict psychoanalytic theory: Narcissism was predicted by parental overvaluation, not by lack of parental warmth. Thus, children seem to acquire narcissism, in part, by internalizing parents’ inflated views of them (e.g., “I am superior to others” and “I am entitled to privileges”). Attesting to the specificity of this finding, self-esteem was predicted by parental warmth, not by parental overvaluation. These findings uncover early socialization experiences that cultivate narcissism, and may inform interventions to curtail narcissistic development at an early age. PMID:25775577

The effect of external mean flow on sound transmission through double-walled cylindrical shells lined with poroelastic material

NASA Astrophysics Data System (ADS)

Zhou, Jie; Bhaskar, Atul; Zhang, Xin

2014-03-01

Sound transmission through a system of double shells, lined with poroelastic material in the presence of external mean flow, is studied. The porous material is modeled as an equivalent fluid because shear wave contributions are known to be insignificant. This is achieved by accounting for the energetically most dominant wave types in the calculations. The transmission characteristics of the sandwich construction are presented for different incidence angles and Mach numbers over a wide frequency range. It is noted that the transmission loss exhibits three dips on the frequency axis as opposed to flat panels where there are only two such frequencies—results are discussed in the light of these observations. Flow is shown to decrease the transmission loss below the ring frequency, but increase this above the ring frequency due to the negative stiffness and the damping effect added by the flow. In the absence of external mean flow, porous material provides superior insulation for most part of the frequency band of interest. However, in the presence of external flow, this is true only below the ring frequency—above this frequency, the presence of air gap in sandwich constructions is the dominant factor that determines the acoustic performance. In the absence of external flow, an air gap always improves sound insulation.

Structural efficiency study of composite wing rib structures

NASA Technical Reports Server (NTRS)

Swanson, Gary D.; Gurdal, Zafer; Starnes, James H., Jr.

1988-01-01

A series of short stiffened panel designs which may be applied to a preliminary design assessment of an aircraft wing rib is presented. The computer program PASCO is used as the primary design and analysis tool to assess the structural efficiency and geometry of a tailored corrugated panel, a corrugated panel with a continuous laminate, a hat stiffened panel, a blade stiffened panel, and an unstiffened flat plate. To correct some of the shortcomings in the PASCO analysis when shear is present, a two step iterative process using the computer program VICON is used. The loadings considered include combinations of axial compression, shear, and lateral pressure. The loading ranges considered are broad enough such that the designs presented may be applied to other stiffened panel applications. An assessment is made of laminate variations, increased spacing, and nonoptimum geometric variations, including a beaded panel, on the design of the panels.

Directionality of the relationship between social well-being and subjective well-being: evidence from a 20-year longitudinal study.

PubMed

Joshanloo, Mohsen; Sirgy, M Joseph; Park, Joonha

2018-04-30

Self-determination theory suggests that psycho-social well-being prospectively predicts subjective well-being. In contrast, the broaden-and-build theory of positive emotions suggests that subjective well-being has a positive impact on subsequent levels of psycho-social well-being. The present study sought to empirically disentangle the directionality of the relationship between subjective well-being and social well-being over time. The study used three waves of survey data, with intervals of 10 years, from the Midlife in the United States (MIDUS) project, a representative longitudinal panel study of American adults (N = 2732). Cross-lagged panel modeling was used for data analysis. The results revealed that social well-being predicted increases in subsequent subjective well-being, whereas subjective well-being did not prospectively predict social well-being. Social well-being also demonstrated more stability over time than did subjective well-being. These findings suggest that optimal social functioning is more likely to be an antecedent to subjective well-being, not the other way around. The results are consistent with predictions guided by self-determination theory.

Null association between workplace social capital and body mass index. Results from a four-wave panel survey among employees in Japan (J-HOPE study).

PubMed

Tsuboya, Toru; Tsutsumi, Akizumi; Kawachi, Ichiro

2016-02-01

Research on the longitudinal association of workplace social capital and obesity is limited. We sought to investigate the prospective association of social capital in the workplace with body mass index (BMI) among employees in Japan. We used repeat panel surveys from 12 private companies in Japan. In the present study, four annual surveys waves were used, including 8811, 10,608, 9766, and 6249 participants, respectively. The first survey was conducted between October 2010 and December 2011 (response rate = 77.4%), and the following three surveys were conducted at approximately annual intervals. Questionnaires inquiring about workplace social capital, and other characteristics were administered at each survey. Height and weight were objectively measured in 11 companies, and self-reported in one company. Cross-sectional as well as fixed effects analysis of change in social capital and change in BMI were conducted. Analyses were stratified by age, sex, BMI at baseline, and companies. The analysis was conducted in 2015. Over 3 years, approximately 32% of the participants changed their BMI by more than 1 unit, while workplace social capital changed for approximately 78% of the sample. We found no associations between change in workplace social capital and change in BMI. The null association was preserved across analyses stratified by sex, age, overweight/obesity status at baseline, and company. Workplace social capital is not associated with changes in employee BMI. Copyright © 2015 Elsevier Ltd. All rights reserved.

Deformation behavior of welded steel sandwich panels under quasi-static loading

DOT National Transportation Integrated Search

2011-03-01

This report describes engineering studies that were conducted to examine the deformation behavior of flat, welded steel sandwich panels under two quasi-static loading conditions: (1) uniaxial compression; and (2) bending with an indenter. Testing and...

Space Network Interoperability Panel (SNIP) study

NASA Technical Reports Server (NTRS)

Ryan, Thomas; Lenhart, Klaus; Hara, Hideo

1991-01-01

The Space Network Interoperability Panel (SNIP) study is a tripartite study that involves the National Aeronautics and Space Administration (NASA), the European Space Agency (ESA), and the National Space Development Agency (NASDA) of Japan. SNIP involves an ongoing interoperability study of the Data Relay Satellite (DRS) Systems of the three organizations. The study is broken down into two parts; Phase one deals with S-band (2 GHz) interoperability and Phase two deals with Ka-band (20/30 GHz) interoperability (in addition to S-band). In 1987 the SNIP formed a Working Group to define and study operations concepts and technical subjects to assure compatibility of the international data relay systems. Since that time a number of Panel and Working Group meetings have been held to continue the study. Interoperability is of interest to the three agencies because it offers a number of potential operation and economic benefits. This paper presents the history and status of the SNIP study.

Theoretical prediction on corrugated sandwich panels under bending loads

NASA Astrophysics Data System (ADS)

Shu, Chengfu; Hou, Shujuan

2018-05-01

In this paper, an aluminum corrugated sandwich panel with triangular core under bending loads was investigated. Firstly, the equivalent material parameters of the triangular corrugated core layer, which could be considered as an orthotropic panel, were obtained by using Castigliano's theorem and equivalent homogeneous model. Secondly, contributions of the corrugated core layer and two face panels were both considered to compute the equivalent material parameters of the whole structure through the classical lamination theory, and these equivalent material parameters were compared with finite element analysis solutions. Then, based on the Mindlin orthotropic plate theory, this study obtain the closed-form solutions of the displacement for a corrugated sandwich panel under bending loads in specified boundary conditions, and parameters study and comparison by the finite element method were executed simultaneously.

Millimeter-wave antenna design

NASA Technical Reports Server (NTRS)

Leighton, R. B.

1977-01-01

Problems and opportunities are discussed for adapting certain design features and construction techniques, developed for producing high accuracy ground based radio dishes, to producing milimeter wave dishes for space use. Specifically considered is a foldable telescope of 24 m aperture and 9.6 m focal length, composed of 37 rigid hexagonal panels, which will fit within the 4.5 m diameter x 18 m long payload limits of space shuttle. As here conceived, the telescope would be a free flyer with its own power and pointing systems. Some of the structural design features and construction procedures are considered.

Genomic sequencing in cystic fibrosis newborn screening: what works best, two-tier predefined CFTR mutation panels or second-tier CFTR panel followed by third-tier sequencing?

PubMed

Currier, Robert J; Sciortino, Stan; Liu, Ruiling; Bishop, Tracey; Alikhani Koupaei, Rasoul; Feuchtbaum, Lisa

2017-10-01

PurposeThe purpose of this study was to model the performance of several known two-tier, predefined mutation panels and three-tier algorithms for cystic fibrosis (CF) screening utilizing the ethnically diverse California population.MethodsThe cystic fibrosis transmembrane conductance regulator (CFTR) mutations identified among the 317 CF cases in California screened between 12 August 2008 and 18 December 2012 were used to compare the expected CF detection rates for several two- and three-tier screening approaches, including the current California approach, which consists of a population-specific 40-mutation panel followed by third-tier sequencing when indicated.ResultsThe data show that the strategy of using third-tier sequencing improves CF detection following an initial elevated immunoreactive trypsinogen and detection of only one mutation on a second-tier panel.ConclusionIn a diverse population, the use of a second-tier panel followed by third-tier CFTR gene sequencing provides a better detection rate for CF, compared with the use of a second-tier approach alone, and is an effective way to minimize the referrals of CF carriers for sweat testing. Restricting screening to a second-tier testing to predefined mutation panels, even broad ones, results in some missed CF cases and demonstrates the limited utility of this approach in states that have diverse multiethnic populations.

On-orbit performance of the Landsat-7 ETM+ radiometric calibrators

USGS Publications Warehouse

Markham, Brian L; Barker, J. L.; Kaita, E.; Seiferth, J.; Morfitt, Ron

2003-01-01

The Landsat-7 Enhanced Thematic Mapper Plus (ETM+) incorporates two new devices to improve its absolute radiometric calibration: a Full Aperture Solar Calibrator (FASC) and a Partial Aperture Solar Calibrator (PASC). The FASC is a diffuser panel, typically deployed once per month. Initial FASC absolute calibration results were within 5% of the pre-launch calibrations. Over time, the responses of the ETM+ to the FASC have varied with the location viewed on the panel, suggesting a localized degradation or contamination of the panel. On the best part of the panel, the trends in response range from m 1.4% y m 1 (band 4) to +0.6% y m 1 (band 7), with band 5 showing the least change at m 0.4% y m 1 . Changes in the panel reflectance due to UV exposure are believed to be the origin of these trends. The PASC is a set of auxiliary optics that allows the ETM+ to image the Sun through reduced apertures. PASC data have normally been acquired on a daily basis. Unlike the FASC, the PASC has exhibited significant anomalies. During the first six months of operation, responses to the PASC increased up to 60%, sending bands 2, 3 and 8 into saturation (band 1 was saturated at launch). The short-wave infrared (SWIR) band individual detectors have shown variations up to - 20% in response to the PASC. The variation is different for each detector. After the first six months, the responses to the PASC have become more stable, with much of the variation related to the within-scan position of the solar image. Overall results to date for all calibrators and comparisons with vicarious calibrations indicate that most of the response variations have been due to the calibrators themselves and suggest that the instrument has been stable with changes in response of less than 0.5% y m 1 .

Study of the integration of wind tunnel and computational methods for aerodynamic configurations

NASA Technical Reports Server (NTRS)

Browne, Lindsey E.; Ashby, Dale L.

1989-01-01

A study was conducted to determine the effectiveness of using a low-order panel code to estimate wind tunnel wall corrections. The corrections were found by two computations. The first computation included the test model and the surrounding wind tunnel walls, while in the second computation the wind tunnel walls were removed. The difference between the force and moment coefficients obtained by comparing these two cases allowed the determination of the wall corrections. The technique was verified by matching the test-section, wall-pressure signature from a wind tunnel test with the signature predicted by the panel code. To prove the viability of the technique, two cases were considered. The first was a two-dimensional high-lift wing with a flap that was tested in the 7- by 10-foot wind tunnel at NASA Ames Research Center. The second was a 1/32-scale model of the F/A-18 aircraft which was tested in the low-speed wind tunnel at San Diego State University. The panel code used was PMARC (Panel Method Ames Research Center). Results of this study indicate that the proposed wind tunnel wall correction method is comparable to other methods and that it also inherently includes the corrections due to model blockage and wing lift.

Active control of sound radiation from a vibrating rectangular panel by sound sources and vibration inputs - An experimental comparison

NASA Technical Reports Server (NTRS)

Fuller, C. R.; Hansen, C. H.; Snyder, S. D.

1991-01-01

Active control of sound radiation from a rectangular panel by two different methods has been experimentally studied and compared. In the first method a single control force applied directly to the structure is used with a single error microphone located in the radiated acoustic field. Global attenuation of radiated sound was observed to occur by two main mechanisms. For 'on-resonance' excitation, the control force had the effect of increasing the total panel input impedance presented to the nosie source, thus reducing all radiated sound. For 'off-resonance' excitation, the control force tends not significantly to modify the panel total response amplitude but rather to restructure the relative phases of the modes leading to a more complex vibration pattern and a decrease in radiation efficiency. For acoustic control, the second method, the number of acoustic sources required for global reduction was seen to increase with panel modal order. The mechanism in this case was that the acoustic sources tended to create an inverse pressure distribution at the panel surface and thus 'unload' the panel by reducing the panel radiation impedance. In general, control by structural inputs appears more effective than control by acoustic sources for structurally radiated noise.

Mechanical Characterization of In and Out-of-Autoclave Cured Composite Panels for Large Launch Vehicles

NASA Technical Reports Server (NTRS)

Kellas, Sotiris; Lerch, Bradley A.; Wilmoth, Nathan

2012-01-01

Two manufacturing demonstration panels (1/16th-arc-segments of 10 m diameter cylinder) were fabricated under the composites part of the Lightweight Space Structures and Materials program. Both panels were of sandwich construction with aluminum core and 8-ply quasi-isotropic graphite/epoxy facesheets. One of the panels was constructed with in-autoclave curable unidirectional prepreg (IM7/977-3) and the second with out-of-autoclave unidirectional prepreg (T40-800B/5320-1). Following NDE inspection, each panel was divided into a number of small specimens for material property characterization and a large (0.914 m wide by 1.524 m long) panel for a buckling study. Results from the small specimen tests were used to (a) assess the fabrication quality of each 1/16th arc segment panel and (b) to develop and/or verify basic material property inputs to Finite Element analysis models. The mechanical performance of the two material systems is assessed at the coupon level by comparing average measured properties such as flatwise tension, edgewise compression, and facesheet tension. The buckling response of the 0.914 m wide by 1.524 m long panel provided a comparison between the in- and out-of autoclave systems at a larger scale.

Simultaneous Processing of Visible and Long-Wave Infrared Satellite Imagery

DTIC Science & Technology

2015-10-19

Telescope, formerly the Gamma-ray Large Area Telescope (GLAST), and the Hubble Space Telescope (HST). The visible data was processed with a multi-frame...prevalent in the Hubble pass where the panels were already close to the background values. These results are promising; the dimmer features of the object

Reverberant Microwave Propagation

DTIC Science & Technology

2008-10-01

HERO Hazards of Electromagnetic Radiation to Ordnance HP Hewlett Packard HWD Half-Wave Dipole IEC International Electrotechnical Commission IEE...composite panels used in new ship design; Hazards of Electromagnetic Radiation to Ordnance ( HERO ) analyses; and digital wireless system performance...Electro-Explosive Device EMC Electromagnetic Compatibility ft Foot (feet) GHz Gigahertz HERO Hazards of Electromagnetic

Overeducation Dynamics and Personality

ERIC Educational Resources Information Center

Blazquez, Maite; Budria, Santiago

2012-01-01

In this paper, we use the 2000-2008 waves of the German Socioeconomic Panel to examine overeducation transitions. The results are based on a first-order Markov model that allows us to account for both the initial conditions problem and potential endogeneity in attrition. We found that overeducation dynamics, especially the probability of entering…

78 FR 60824 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-02

... coaching. This system assists in coding interviews for measuring question and interviewer performance and... the 2014 SIPP interview. The start of the 2014 SIPP Panel was scheduled at the earliest possible start... wave 1 will interview respondents using the previous calendar year 2013 as the reference period and...

Damage detection in composite panels based on mode-converted Lamb waves sensed using 3D laser scanning vibrometer

NASA Astrophysics Data System (ADS)

Pieczonka, Łukasz; Ambroziński, Łukasz; Staszewski, Wiesław J.; Barnoncel, David; Pérès, Patrick

2017-12-01

This paper introduces damage identification approach based on guided ultrasonic waves and 3D laser Doppler vibrometry. The method is based on the fact that the symmetric and antisymmetric Lamb wave modes differ in amplitude of the in-plane and out-of-plane vibrations. Moreover, the modes differ also in group velocities and normally they are well separated in time. For a given time window both modes can occur simultaneously only close to the wave source or to a defect that leads to mode conversion. By making the comparison between the in-plane and out-of-plane wave vector components the detection of mode conversion is possible, allowing for superior and reliable damage detection. Experimental verification of the proposed damage identification procedure is performed on fuel tank elements of Reusable Launch Vehicles designed for space exploration. Lamb waves are excited using low-profile, surface-bonded piezoceramic transducers and 3D scanning laser Doppler vibrometer is used to characterize the Lamb wave propagation field. The paper presents theoretical background of the proposed damage identification technique as well as experimental arrangements and results.

Does Studying Political Science Affect Civic Attitudes?: A Panel Comparison of Students of Politics, Law, and Mass Communication

ERIC Educational Resources Information Center

Esaiasson, Peter; Persson, Mikael

2014-01-01

The article evaluates the civic implications of studying political science. Previous research has argued that learning rational choice models of political behavior could be detrimental to civic outcomes. However, results from our two panel surveys of students at Swedish universities show the opposite: studying political science has positive…

Multi-objective optimal design of sandwich panels using a genetic algorithm

NASA Astrophysics Data System (ADS)

Xu, Xiaomei; Jiang, Yiping; Pueh Lee, Heow

2017-10-01

In this study, an optimization problem concerning sandwich panels is investigated by simultaneously considering the two objectives of minimizing the panel mass and maximizing the sound insulation performance. First of all, the acoustic model of sandwich panels is discussed, which provides a foundation to model the acoustic objective function. Then the optimization problem is formulated as a bi-objective programming model, and a solution algorithm based on the non-dominated sorting genetic algorithm II (NSGA-II) is provided to solve the proposed model. Finally, taking an example of a sandwich panel that is expected to be used as an automotive roof panel, numerical experiments are carried out to verify the effectiveness of the proposed model and solution algorithm. Numerical results demonstrate in detail how the core material, geometric constraints and mechanical constraints impact the optimal designs of sandwich panels.

Beeswax as phase change material to improve solar panel’s performance

NASA Astrophysics Data System (ADS)

Thaib, R.; Rizal, S.; Riza, M.; Mahlia, T. M. I.; Rizal, T. A.

2018-02-01

One of the main obstacles faced during the operation of photovoltaic (PV) panels was overheating due to excessive solar radiation and high ambient temperatures. In this research, investigates the use of beeswax phase change materials (PCM) to maintain the temperature of the panels close to ambient. Solar panels used in this study has 839 mm length, 537 mm wide, and 50 mm thick, with maximum output power at 50 W. During the study, there were two solar panels was evaluated, one without phase change material while the other one was using beeswax phase change material. Solar panels were mounted at 15° slope. Variables observed was the temperature of solar panel’s surface, output voltage and current that produced by PV panels, wind speed around solar panels, and solar radiation. The observation was started at 07:00 am and ended at 06:00 pm. The research shows that maximum temperature of solar panels surface without phase change material is ranging between 46-49 °C, and electrical efficiency is about 7.2-8.8%. Meanwhile, for solar panels with beeswax phase change material, the maximum temperature solar panels surface is relatively low ranging between 33-34 °C, and its electrical efficiency seems to increase about 9.1-9.3%.

Race, gender, and the response to stress: autoworkers' vulnerability to long-term unemployment.

PubMed

Broman, C L; Hamilton, V L; Hoffman, W S; Mavaddat, R

1995-12-01

A three-wave panel study of auto plant closings focused on the mental health effects of unemployment on blue-collar workers. This paper explores how the impact of long-term unemployment varies across race and gender. We also examine whether other demographic factors can themselves modify the impacts of race and gender. Dependent variables include two measures of distress and two drinking measures. Results showed that the effect of long-term unemployment on distress and drinking was more severe among less educated workers, and responses of blacks were especially sensitive to level of education. In addition, men showed a greater association of long-term unemployment with depression (and to some extent anxiety) than did women. Marriage affected the responses of men but not of women, and of whites but not of blacks. Explanatory variables--the worker's experiences of financial hardship, other negative life events, and lack of a confidant--largely accounted for male-female differences. We conclude by discussing theoretical implications of these effects and address the limitations of the traditional term "vulnerability" in describing them.

Final Report for Dynamic Models for Causal Analysis of Panel Data. Methodological Overview. Part II, Chapter 1.

ERIC Educational Resources Information Center

Hannan, Michael T.

This technical document, part of a series of chapters described in SO 011 759, describes a basic model of panel analysis used in a study of the causes of institutional and structural change in nations. Panel analysis is defined as a record of state occupancy of a sample of units at two or more points in time; for example, voters disclose voting…

Application of compound parabolic concentrators to solar photovoltaic conversion. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, R.L.; Gorski, A.J.; Graven, R.M.

1977-02-01

The final results of an analytical and experimental study of the application of nonimaging concentrators to solar photovoltaic conversion are presented. Two versions of the Compound Parabolic Concentrator (CPC) were considered, the Dielectric Compound Parabolic Concentrator (DCPC) in which the concentrator is filled with a dielectric material that satisfies requirements for Total Internal Reflection (TIR), and a conventional CPC in which metallic reflection is used for the mirror surfaces. Two working prototype panels were constructed and tested during the course of the program. The first was a 1.22 m by 1.22 m DCPC panel that requires only ten adjustments/year, hasmore » a panel utilization factor (packing factor) of 96%, and delivered the equivalent of 138 W (peak) under 1 kW/m/sup 2/ direct insolation. The net energy conversion efficiency was 10.3% over the entire panel area. The second panel was a conventional CPC panel measuring 1.22 m by 1.22 m. This panel requires thirty-six adjustments per year, and delivers the equivalent of 97 W when under 1 kW/m/sup 2/ direct insolation. The results of a cost-effectiveness analysis of the concept of using nonimaging concentrators for photovoltaic conversion are also presented. The concentrator panels showed a decided savings in comparison to the cost of flat plate photovoltaic panels, both at present-day silicon costs ($2000/m/sup 2/) and projected lower silicon costs ($200/m/sup 2/). At a silicon cost of $200/m/sup 2/, a two-dimensional (cone) version of the collector has the potential for achieving from $0.60-2.00 per average watt (about $0.15-0.50 per peak watt) while requiring only crude (+-4.5/sup 0/) tracking.« less

Cross-lagged relationships between workplace demands, control, support, and sleep problems.

PubMed

Hanson, Linda L Magnusson; Åkerstedt, Torbjörn; Näswall, Katharina; Leineweber, Constanze; Theorell, Töres; Westerlund, Hugo

2011-10-01

Sleep problems are experienced by a large part of the population. Work characteristics are potential determinants, but limited longitudinal evidence is available to date, and reverse causation is a plausible alternative. This study examines longitudinal, bidirectional relationships between work characteristics and sleep problems. Prospective cohort/two-wave panel. Sweden. 3065 working men and women approximately representative of the Swedish workforce who responded to the 2006 and 2008 waves of the Swedish Longitudinal Occupational Survey of Health (SLOSH). N/A. Bidirectional relationships between, on the one hand, workplace demands, decision authority, and support, and, on the other hand, sleep disturbances (reflecting lack of sleep continuity) and awakening problems (reflecting feelings of being insufficiently restored), were investigated by structural equation modeling. All factors were modeled as latent variables and adjusted for gender, age, marital status, education, alcohol consumption, and job change. Concerning sleep disturbances, the best fitting models were the "forward" causal model for demands and the "reverse" causal model for support. Regarding awakening problems, reciprocal models fitted the data best. Cross-lagged analyses indicates a weak relationship between demands at Time 1 and sleep disturbances at Time 2, a "reverse" relationship from support T1 to sleep disturbances T2, and bidirectional associations between work characteristics and awakening problems. In contrast to an earlier study on demands, control, sleep quality, and fatigue, this study suggests reverse and reciprocal in addition to the commonly hypothesized causal relationships between work characteristics and sleep problems based on a 2-year time lag.

Two case studies: QuietRock QR-530 drywall panels in new and remediated multifamily construction

NASA Astrophysics Data System (ADS)

Tinianov, Brian D.

2005-09-01

Reliable acoustical isolation continues to be a high risk element of contemporary multifamily construction. Traditional construction techniques, offering potentially high acoustical performance, exist but may be compromised during typical construction or occupation. This paper presents two case studies using a new class of construction material-drywall panels employing constrained layer damping. QuietRock QR-530 damped gypsum board panels are used in a new construction project and as part of a remediation treatment. In a first study, QR-530 panels were used as a drywall alternative in a 2×6, semistaggered, framed wall separating luxury condominiums. Field evaluation per ASTM E36 revealed a normalized noise isolation class of 56. In a second case study, a single layer of QuietRock was applied directly to an existing single stud assembly in a resort hotel. Before and after testing yielded a change of 14 points, raising the noise isolation class from 36 to 50. This paper reviews the details of the test cases and the underlying physical principals of the subject materials.

Design of Fiber Reinforced Foam Sandwich Panels for Large Ares V Structural Applications

NASA Technical Reports Server (NTRS)

Bednarcyk, Brett A.; Arnold, Steven M.; Hopkins, Dale A.

2010-01-01

The preliminary design of three major structural components within NASA's Ares V heavy lift vehicle using a novel fiber reinforced foam composite sandwich panel concept is presented. The Ares V payload shroud, interstage, and core intertank are designed for minimum mass using this panel concept, which consists of integral composite webs separated by structural foam between two composite facesheets. The HyperSizer structural sizing software, in conjunction with NASTRAN finite element analyses, is used. However, since HyperSizer does not currently include a panel concept for fiber reinforced foam, the sizing was performed using two separate approaches. In the first, the panel core is treated as an effective (homogenized) material, whose properties are provided by the vendor. In the second approach, the panel is treated as a blade stiffened sandwich panel, with the mass of the foam added after completion of the panel sizing. Details of the sizing for each of the three Ares V components are given, and it is demonstrated that the two panel sizing approaches are in reasonable agreement for thinner panel designs, but as the panel thickness increases, the blade stiffened sandwich panel approach yields heavier panel designs. This is due to the effects of local buckling, which are not considered in the effective core property approach.

Space Station Freedom solar array panels plasma interaction test facility

NASA Technical Reports Server (NTRS)

Martin, Donald F.; Mellott, Kenneth D.

1989-01-01

The Space Station Freedom Power System will make extensive use of photovoltaic (PV) power generation. The phase 1 power system consists of two PV power modules each capable of delivering 37.5 KW of conditioned power to the user. Each PV module consists of two solar arrays. Each solar array is made up of two solar blankets. Each solar blanket contains 82 PV panels. The PV power modules provide a 160 V nominal operating voltage. Previous research has shown that there are electrical interactions between a plasma environment and a photovoltaic power source. The interactions take two forms: parasitic current loss (occurs when the currect produced by the PV panel leaves at a high potential point and travels through the plasma to a lower potential point, effectively shorting that portion of the PV panel); and arcing (occurs when the PV panel electrically discharges into the plasma). The PV solar array panel plasma interaction test was conceived to evaluate the effects of these interactions on the Space Station Freedom type PV panels as well as to conduct further research. The test article consists of two active solar array panels in series. Each panel consists of two hundred 8 cm x 8 cm silicon solar cells. The test requirements dictated specifications in the following areas: plasma environment/plasma sheath; outgassing; thermal requirements; solar simulation; and data collection requirements.

Divorce and psychological stress.

PubMed

Booth, A; Amato, P

1991-12-01

While research on adjustment to divorce has been extensive, the paucity of studies assessing stress before and after divorce has kept the relation between psychological stress and martial dissolution unclear. Conflicting findings cast some doubt on the utility of using a crisis model to study divorce. Analysis of three-wave panel data from a national sample of persons married in 1980 indicates that the crisis model is appropriate for understanding adjustment to divorce. Comparisons of divorced persons with married persons show a predivorce rise in stress which then returns to levels comparable to those reported by married individuals. No evidence was found supporting the idea that a high level of psychological stress is a general cause of divorce or that dissolution resulted in more or less permanent elevation of psychological stress. Findings support the hypothesis that predivorce resources and outlooks influence the amount of stress experienced in the two years immediately following divorce. Below median family incomes, no post-high school experience, and wife not in the labor force put divorcing individuals at a disadvantage. Individuals reporting few premarital troubles and beliefs in the immorality of divorce also appear to experience heightened stress in the two years following divorce.

Stress analysis and buckling of J-stiffened graphite-epoxy panel

NASA Technical Reports Server (NTRS)

Davis, R. C.

1980-01-01

A graphite epoxy shear panel with bonded on J stiffeners was investigated. The panel, loaded to buckling in a picture frame shear test is described. Two finite element models, each of which included the doubler material bonded to the panel skin under the stiffeners and at the panel edges, were used to make a stress analysis of the panel. The shear load distributions in the panel from two commonly used boundary conditions, applied shear load and applied displacement, were compared with the results from one of the finite element models that included the picture frame test fixture.

Nonlinear flutter analysis of composite panels

NASA Astrophysics Data System (ADS)

An, Xiaomin; Wang, Yan

2018-05-01

Nonlinear panel flutter is an interesting subject of fluid-structure interaction. In this paper, nonlinear flutter characteristics of curved composite panels are studied in very low supersonic flow. The composite panel with geometric nonlinearity is modeled by a nonlinear finite element method; and the responses are computed by the nonlinear Newmark algorithm. An unsteady aerodynamic solver, which contains a flux splitting scheme and dual time marching technology, is employed in calculating the unsteady pressure of the motion of the panel. Based on a half-step staggered coupled solution, the aeroelastic responses of two composite panels with different radius of R = 5 and R = 2.5 are computed and compared with each other at different dynamic pressure for Ma = 1.05. The nonlinear flutter characteristics comprising limited cycle oscillations and chaos are analyzed and discussed.

Structural Response Prediction: Full-field, Dynamic Pressure and Displacement Measurements of a Panel Excited by Shock Boundary-layer Interaction

DTIC Science & Technology

2015-02-01

research cell14. The RC-19 facility is a continuous flow wind tunnel designed to study the mechanisms that govern the mixing and combustion process... angle of 39° from the tunnel bottom wall. The shock generator can translate 170 mm in the flow direction to allow for the shock wave to impinge from...approximate absolute pressure of 20.5 kPa. A series of “ wind -off” images for PSP were collected at that time. The tunnel was then started by setting the

Regression analysis of mixed recurrent-event and panel-count data.

PubMed

Zhu, Liang; Tong, Xinwei; Sun, Jianguo; Chen, Manhua; Srivastava, Deo Kumar; Leisenring, Wendy; Robison, Leslie L

2014-07-01

In event history studies concerning recurrent events, two types of data have been extensively discussed. One is recurrent-event data (Cook and Lawless, 2007. The Analysis of Recurrent Event Data. New York: Springer), and the other is panel-count data (Zhao and others, 2010. Nonparametric inference based on panel-count data. Test 20: , 1-42). In the former case, all study subjects are monitored continuously; thus, complete information is available for the underlying recurrent-event processes of interest. In the latter case, study subjects are monitored periodically; thus, only incomplete information is available for the processes of interest. In reality, however, a third type of data could occur in which some study subjects are monitored continuously, but others are monitored periodically. When this occurs, we have mixed recurrent-event and panel-count data. This paper discusses regression analysis of such mixed data and presents two estimation procedures for the problem. One is a maximum likelihood estimation procedure, and the other is an estimating equation procedure. The asymptotic properties of both resulting estimators of regression parameters are established. Also, the methods are applied to a set of mixed recurrent-event and panel-count data that arose from a Childhood Cancer Survivor Study and motivated this investigation. © The Author 2014. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Transparent self-cleaning dust shield

DOEpatents

Mazumder, Malay K.; Sims, Robert A.; Wilson, James D.

2005-06-28

A transparent electromagnetic shield to protect solar panels and the like from dust deposition. The shield is a panel of clear non-conducting (dielectric) material with embedded parallel electrodes. The panel is coated with a semiconducting film. Desirably the electrodes are transparent. The electrodes are connected to a single-phase AC signal or to a multi-phase AC signal that produces a travelling electromagnetic wave. The electromagnetic field produced by the electrodes lifts dust particles away from the shield and repels charged particles. Deposited dust particles are removed when the electrodes are activated, regardless of the resistivity of the dust. Electrostatic charges on the panel are discharged by the semiconducting film. When used in conjunction with photovoltaic cells, the power for the device may be obtained from the cells themselves. For other surfaces, such as windshields, optical windows and the like, the power must be derived from an external source. One embodiment of the invention employs monitoring and detection devices to determine when the level of obscuration of the screen by dust has reached a threshold level requiring activation of the dust removal feature.

An Investigation on Low Velocity Impact Response of Multilayer Sandwich Composite Structures

PubMed Central

Jedari Salami, S.; Sadighi, M.; Shakeri, M.; Moeinfar, M.

2013-01-01

The effects of adding an extra layer within a sandwich panel and two different core types in top and bottom cores on low velocity impact loadings are studied experimentally in this paper. The panel includes polymer composite laminated sheets for faces and the internal laminated sheet called extra layer sheet, and two types of crushable foams are selected as the core material. Low velocity impact tests were carried out by drop hammer testing machine to the clamped multilayer sandwich panels with expanded polypropylene (EPP) and polyurethane rigid (PUR) in the top and bottom cores. Local displacement of the top core, contact force and deflection of the sandwich panel were obtained for different locations of the internal sheet; meanwhile the EPP and PUR were used in the top and bottom cores alternatively. It was found that the core material type has made significant role in improving the sandwich panel's behavior compared with the effect of extra layer location. PMID:24453804

Two-point coherence of wave packets in turbulent jets

NASA Astrophysics Data System (ADS)

Jaunet, V.; Jordan, P.; Cavalieri, A. V. G.

2017-02-01

An experiment has been performed in order to provide support for wave-packet jet-noise modeling efforts. Recent work has shown that the nonlinear effects responsible for the two-point coherence of wave packets must be correctly accounted for if accurate sound prediction is to be achieved for subsonic turbulent jets. We therefore consider the same Mach 0.4 turbulent jet studied by Cavalieri et al. [Cavalieri et al., J. Fluid Mech. 730, 559 (2013), 10.1017/jfm.2013.346], but this time using two independent but synchronized, time-resolved stereo particle-image velocimetry systems. Each system can be moved independently, allowing simultaneous measurement of velocity in two, axially separated, crossflow planes, enabling eduction of the two-point coherence of wave packets. This and the associated length scales and phase speeds are studied and compared with those of the energy-containing turbulent eddies. The study illustrates how the two-point behavior of wave packets is fundamentally different from that of the more usually studied bulk two-point behavior, suggesting that sound-source modeling efforts should be reconsidered in the framework of wave packets. The study furthermore identifies two families of two-point-coherence behavior, respectively upstream and downstream of the end of the potential core, regions where linear theory is, respectively, successful and unsuccessful in predicting the axial evolution of wave-packets fluctuation energy.

Estudio de la influencia de la refrigeracion con aire de forma natural e inducida en el comportamiento de instalaciones fotovoltaicas

NASA Astrophysics Data System (ADS)

Mazon Hernandez, Rocio

The aim is to analyse the negative influence of high panel temperatures on electrical production when they are placed on steel roofs of industrial buildings and greenhouse roofs. Different configurations have been tested in order to allow cooling of photovoltaic panels to decrease panel temperature and improve electrical performance. To research this problem two experimental facilities have been built. The first facility includes two panels fixed on a structure. A panel is integrated on a parallel steel plate which does not allow sufficient cooling. Between both surfaces, there is an open air channel in which an air flow is created by the chimney effect thus cooling the panel by natural convection or inducing air, using a fan, by forced convection. The other panel has not any plate underneath it and is used as a referent. The electrical behaviour of the integrated panel has been studied for different air gaps and induced velocities, being also compared with the reference panel. An experimental model was developed to establish correlations which allow determine the panel temperature depending on the influential variables on the cooling ability. This research also analyses the data of a working solar plant, with the same panel model, obtaining the correlations between electrical variables and panel temperature. A comparison with the electrical behaviour in the experimental facility and the solar plant is also presented. The second experimental facility is a replica of a photovoltaic greenhouse. It consists of four photovoltaic panels placed on the plastic roof, providing an open and divergent channel between both surfaces thus creating an air flow by natural convection. This research studies the effect of high temperatures within the greenhouse which is transferred by the roof and thus affects the electrical production. In addition, two air gaps were used and the effect of adding insulating material to the plastic roof was studied. The electrical variables of the panels are analysed to compare and select the best configuration. The presented research provides a deep knowledge of how they work as well as information and results for an improvement in future designs of building integrated photovoltaic systems. Este estudio se centra en analizar la influencia negativa de la temperatura en la produccion electrica de paneles fotovoltaicos al estar emplazados sobre cubierta de acero, como sucede en naves industriales y sobre un invernadero. Se estudian diferentes configuraciones que permitan refrigerar los paneles, reduciendo su temperatura y mejorar su rendimiento. Para abordar este problema, se han construido dos instalaciones experimentales, fieles a plantas solares en funcionamiento. Una instalacion engloba dos paneles fotovoltaicos sobre estructura fija al suelo. Uno de los paneles esta integrado sobre una superficie paralela y metalica. Entre ambas superficies existe un espacio que posibilita circular aire, permitiendo refrigerar el panel por conveccion natural, o conveccion forzada impulsando el aire con un ventilador. El otro panel, libre por su cara posterior y se ha considerado de referencia. Se ha estudiado el comportamiento del panel integrado sobre cubierta para diferentes secciones de aire y velocidades inducidas, comparandolo con el panel de referencia. Se ha desarrollado un modelo experimental que nos permite determinar la temperatura del panel en funcion de las variables que influyen en su refrigeracion. Adicionalmente, se han analizado los datos de una planta solar en funcionamiento, con paneles de igual caracteristicas, obteniendo correlaciones entre la temperatura del panel y las variables electricas y comparandolos con las obtenidas en la instalacion experimental. La segunda instalacion experimental reproduce parte de una instalacion solar sobre un invernadero, formada por cuatro paneles fotovoltaicos colocados sobre el plastico del invernadero, existiendo un canal divergente entre ambas superficies. Se estudia la influencia de las altas temperaturas en el interior del invernadero sobre la produccion electrica de los paneles, decido a la transferencia de calor del interior del invernadero. Ademas, se han ensayado dos separaciones diferentes y para cada una se ha comparado con la misma, utilizando un aislante sobre la cubierta. El estudio realizado sobre ambas instalaciones ha proporcionado un conocimiento profundo del funcionamiento de cada una de ellas, asi como informacion valida para una mejora de futuros disenos de instalaciones fotovoltaicas sobre cubiertas.

Construction and Performance Studies of Large Resistive Micromegas Quadruplets

NASA Astrophysics Data System (ADS)

Farina, E.; Iengo, P.; Bianco, M.; Sidiropoulou, O.; Kuger, F.; Sekhniaidze, G.; Vergain, M.; Wotschack, J.; Danielsson, H.; Degrange, J.; De Oliveira, R.; Schott, M.; Lin, Tai-Hua; Valderanis, C.; Düdder, A.

2018-02-01

In view of the use of Micromegas detectors for the upgrade of the ATLAS muon system, two detector quadruplets with an area of 0.3 m2 per plane serving as prototypes for future ATLAS chambers have been constructed. They are based on the resistive-strip technology and thus spark tolerant. The detectors were built in a modular way. The quadruplets consist of two double-sided readout panels and three support (or drift) panels equipped with the micromesh and the drift electrode. The panels are bolted together such that the detector can be opened and cleaned, if required. Two of the readout planes are equipped with readout strips inclined by 1.5 degree. In this talk, we present the results of detailed performance studies based on X-Ray and cosmic ray measurements as well as measurements with 855 MeV electrons at the MAMI accelerator. In particular, results on reconstruction efficiencies, track resolution and gain homogeneity is presented.

Evaluation of OLED and edge-lit LED lighting panels

NASA Astrophysics Data System (ADS)

Mou, Xi; Narendran, Nadarajah; Zhu, Yiting; Freyssinier, Jean Paul

2016-09-01

Solid-state lighting (SSL) offers a new technology platform for lighting designers and end-users to illuminate spaces with low energy demand. Two types of SSL sources include organic light-emitting diodes (OLEDs) and light-emitting diodes (LEDs). OLED is an area light source, and its primary competing technology is the edge-lit LED panel. Generally, both of these technologies are considered similar in shape and appearance, but there is little understanding of how people perceive discomfort glare from large area light sources. The objective of this study was to evaluate discomfort glare for the two lighting technologies under similar operating conditions by gathering observers' reactions. The human factors study results showed no statistically significant difference in human response to discomfort glare between OLED and edge-lit LED panels when the two light sources produced the same lighting stimulus. This means both technologies appeared equally glary beyond a certain luminance.

Spin flip statistics and spin wave interference patterns in Ising ferromagnetic films: A Monte Carlo study.

PubMed

Acharyya, Muktish

2017-07-01

The spin wave interference is studied in two dimensional Ising ferromagnet driven by two coherent spherical magnetic field waves by Monte Carlo simulation. The spin waves are found to propagate and interfere according to the classic rule of interference pattern generated by two point sources. The interference pattern of spin wave is observed in one boundary of the lattice. The interference pattern is detected and studied by spin flip statistics at high and low temperatures. The destructive interference is manifested as the large number of spin flips and vice versa.

Utilization of waste of chicken feathers and waste of cardboard as the material of acoustic panel maker

NASA Astrophysics Data System (ADS)

Ansarullah; Rahim, Ramli; Kusno, Asniawaty; Baharuddin; Jamala, Nurul

2018-03-01

In The existence of chicken fur is a waste of chicken slaughterhouse Which is produced daily and still not widely used. Likewise cartons everywhere we can see its being because its function is so great in all human activities In the fulfillment of the need for storage and packaging of goods for human purposes such as electronic goods, commodity, Because it has a relatively large thickness of paper. Several studies have proven that Quill and cardboard can be used for acoustic materials. This study aims to identify the potential of chicken fur and cardboard to be created as panel materials Which acts as an acoustic panel. . This study uses an experimental method by combining two materials, Including waste Quill and carton waste by performing several stages in the formation of panels, Such as the selection of chicken fur material and cardboard cleaning process, drying process, enumeration process, panel modeling process. The result of this research is acoustic panel model with size 20x20cm2 with thickness 9 and 18 mm, The study also produced a Ø9,8 cm diameter-shaped panel model with 1.5cm, 2.5cm, and 5cm thickness for use in testing absorption coefficients using impedance tubes.

Propulsion system ignition overpressure for the Space Shuttle

NASA Technical Reports Server (NTRS)

Ryan, R. S.; Jones, J. H.; Guest, S. H.; Struck, H. G.; Rheinfurth, M. H.; Verferaime, V. S.

1981-01-01

Liquid and solid rocket motor propulsion systems create an overpressure wave during ignition, caused by the accelerating gas particles pushing against or displacing the air contained in the launch pad or launch facility and by the afterburning of the fuel-rich gases. This wave behaves as a blast or shock wave characterized by a positive triangular-shaped first pulse and a negative half-sine wave second pulse. The pulse travels up the space vehicle and has the potential of either overloading individual elements or exciting overall vehicle dynamics. The latter effect results from the phasing difference of the wave from one side of the vehicle to the other. This overpressure phasing, or delta P environment, because of its frequency content as well as amplitude, becomes a design driver for certain panels (e.g., thermal shields) and payloads for the Space Shuttle. The history of overpressure effects on the Space Shuttle, the basic overpressure phenomenon, Space Shuttle overpressure environment, scale model overpressure testing, and techniques for suppressing the overpressure environments are considered.

Determinants of functional recovery in older adults surgically treated for cancer.

PubMed

Hodgson, Nancy A; Given, Charles W

2004-01-01

The purpose of this study was to examine the psychosocial and disease-specific factors that influence functional recovery in older adults newly diagnosed with cancer. Multivariate logistic regression models were estimated using panel data from a sample of community-residing adults older than 65 years surgically treated for lung, prostate, breast, or colorectal cancer (N = 172). Data were obtained between 1993 and 1997 during interviews 4 to 6 weeks after cancer surgery for Wave 1 and 14 to 16 weeks after hospital discharge for Wave 2. The outcome measure, functional recovery, was determined by comparing the physical function and physical role subscales of Medical Outcomes Study (MOS) SF-36 over time. Findings showed that prostatectomy patients were more likely to recover by Wave 2 when compared to individuals with lung, colon, or breast resections. Comorbidities and symptom severity were each significantly associated with a decreased probability of recovery. Pain and fatigue were the most common and most severe symptoms reported, regardless of primary site. Psychological well-being was a significant factor influencing functional recovery when age, comorbidities, site of disease, and symptom severity were controlled. The results clearly point to the need for psychological support following cancer surgery.

Calculation of two dimensional vortex/surface interference using panel methods

NASA Technical Reports Server (NTRS)

Maskew, B.

1980-01-01

The application of panel methods to the calculation of vortex/surface interference characteristics in two dimensional flow was studied over a range of situations starting with the simple case of a vortex above a plane and proceeding to the case of vortex separation from a prescribed point on a thick section. Low order and high order panel methods were examined, but the main factor influencing the accuracy of the solution was the distance between control stations in relation to the height of the vortex above the surface. Improvements over the basic solutions were demonstrated using a technique based on subpanels and an applied doublet distribution.

Solar panel thermal cycling testing by solar simulation and infrared radiation methods

NASA Technical Reports Server (NTRS)

Nuss, H. E.

1980-01-01

For the solar panels of the European Space Agency (ESA) satellites OTS/MAROTS and ECS/MARECS the thermal cycling tests were performed by using solar simulation methods. The performance data of two different solar simulators used and the thermal test results are described. The solar simulation thermal cycling tests for the ECS/MARECS solar panels were carried out with the aid of a rotatable multipanel test rig by which simultaneous testing of three solar panels was possible. As an alternative thermal test method, the capability of an infrared radiation method was studied and infrared simulation tests for the ultralight panel and the INTELSAT 5 solar panels were performed. The setup and the characteristics of the infrared radiation unit using a quartz lamp array of approx. 15 sq and LN2-cooled shutter and the thermal test results are presented. The irradiation uniformity, the solar panel temperature distribution, temperature changing rates for both test methods are compared. Results indicate the infrared simulation is an effective solar panel thermal testing method.

Employee Skill, Occupation, and Work Involvement. Working Paper.

ERIC Educational Resources Information Center

Rose, Michael

Data from the Work History and Attitudes survey of the Social Change and Economic Life research initiative (SCELI) enquiry of 1986-1989 and the first wave of the British Household Panel Survey (BHPS) were analyzed to determine their continuity and comparability with regard to employee attitudes in general and job satisfaction and work centrality…

77 FR 12795 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-02

... Topical Module. OMB Control Number: 0607-0944. Form Number(s): SIPP 281305(L), Director's Letter: SIPP... Management and Budget (OMB) to conduct a topical module during the Wave 13 interview for the 2008 Panel of... provided these kinds of data on a continuing basis since 1983, permitting levels of economic well-being and...

Selective Exposure to Televised Aggression. Report No. 7.

ERIC Educational Resources Information Center

Atkin, Charles K.; And Others

This 2-wave panel survey of young people was conducted to explore the relationship between attitudes and viewing over time, examining aggressiveness and viewing of programs portraying physical and verbal aggression. Questionnaires were administered to 227 children in the fourth, sixth, and eighth grades in 1976 and again one year later. The…

Substitution or Symbiosis? Assessing the Relationship between Religious and Secular Giving

ERIC Educational Resources Information Center

Hill, Jonathan P.; Vaidyanathan, Brandon

2011-01-01

Research on philanthropy has not sufficiently examined whether charitable giving to religious causes impinges on giving to secular causes. Examining three waves of national panel data, we find that the relationship between religious and secular giving is generally not of a zero-sum nature; families that increase their religious giving also…

Impact of Acoustic Standing Waves on Structural Responses: Reverberant Acoustic Testing (RAT) vs. Direct Field Acoustic Testing (DFAT)

NASA Technical Reports Server (NTRS)

Kolaini, Ali R.; Doty, Benjamin; Chang, Zensheu

2012-01-01

Loudspeakers have been used for acoustic qualification of spacecraft, reflectors, solar panels, and other acoustically responsive structures for more than a decade. Limited measurements from some of the recent speaker tests used to qualify flight hardware have indicated significant spatial variation of the acoustic field within the test volume. Also structural responses have been reported to differ when similar tests were performed using reverberant chambers. To address the impact of non-uniform acoustic field on structural responses, a series of acoustic tests were performed using a flat panel and a 3-ft cylinder exposed to the field controlled by speakers and repeated in a reverberant chamber. The speaker testing was performed using multi-input-single-output (MISO) and multi-input-multi-output (MIMO) control schemes with and without the test articles. In this paper the spatial variation of the acoustic field due to acoustic standing waves and their impacts on the structural responses in RAT and DFAT (both using MISO and MIMO controls for DFAT) are discussed in some detail.

Head-on collision between two dust acoustic solitary waves and study of rogue waves in multicomponent dusty plasma

NASA Astrophysics Data System (ADS)

Singh, Kuldeep; Kaur, Nimardeep; Saini, N. S.

2017-06-01

In this investigation, the study of head-on collision between two dust acoustic solitary waves (DASWs) and characteristics of rogue waves in a dusty plasma composed of dust fluid, kappa distributed ions, electrons, and positrons has been presented. Two Korteweg-de Vries equations are derived by employing the extended Poincaré-Lighthill-Kuo reductive perturbation method. The analytical phase shifts and trajectories after head-on collision of two DA solitary waves have been studied numerically. It is found that the presence of superthermal ions, electrons, as well as positrons; concentrations of electrons and positrons; and temperature of electrons and dust have an emphatic influence on the phase shifts after the head-on collision of two rarefactive DA solitary waves. The time evolution of two rarefactive DASWs has also been presented. Further, the generation of dust acoustic rogue waves (DARWs) has been studied in the framework of rational solution of nonlinear Schrödinger equation. The dependence of the rogue wave profile on the relevant physical parameters has been discussed in detail. It is emphasized that the real implementation of our present results may be of great importance in different regions of space and astrophysical environments, especially in the interstellar medium and Jupiter rings.

Manufacture, assembly, and delivery of beryllium test panels

NASA Technical Reports Server (NTRS)

1972-01-01

Details of the fabrication and assembly of two 99 cm by 99 cm (39 in. by 39 in.) beryllium heat shield test panels are presented. Each panel consists of two hat-stiffened, formed skins which overlap a transverse slip joint at the center of the panel; clips join the two skins at the slip joint, and continuous standoffs are provided at the ends of the panel. The hat-stiffeners are joined to the skin by furnace-brazing, using the braze alloy BAg 18. The parts are generally 0.051 cm (0.020 in.) thick. Tools used to form the detail parts are shown, together with the results of preliminary forming and brazing trials to verify processing techniques. Problems encountered in the manufacture of the panels are discussed.

Two-dimensional solitary waves and periodic waves on coupled nonlinear electrical transmission lines

NASA Astrophysics Data System (ADS)

Wang, Heng; Zheng, Shuhua

2017-06-01

By using the dynamical system approach, the exact travelling wave solutions for a system of coupled nonlinear electrical transmission lines are studied. Based on this method, the bifurcations of phase portraits of a dynamical system are given. The two-dimensional solitary wave solutions and periodic wave solutions on coupled nonlinear transmission lines are obtained. With the aid of Maple, the numerical simulations are conducted for solitary wave solutions and periodic wave solutions to the model equation. The results presented in this paper improve upon previous studies.

Integral Airframe Structures (IAS): Validated Feasibility Study of Integrally Stiffened Metallic Fuselage Panels for Reducing Manufacturing Costs

NASA Technical Reports Server (NTRS)

Munroe, J.; Wilkins, K.; Gruber, M.; Domack, Marcia S. (Technical Monitor)

2000-01-01

The Integral Airframe Structures (IAS) program investigated the feasibility of using "integrally stiffened" construction for commercial transport fuselage structure. The objective of the program was to demonstrate structural performance and weight equal to current "built-up" structure with lower manufacturing cost. Testing evaluated mechanical properties, structural details, joint performance, repair, static compression, and two-bay crack residual strength panels. Alloys evaluated included 7050-T7451 plate, 7050-T74511 extrusion, 6013-T6511x extrusion, and 7475-T7351 plate. Structural performance was evaluated with a large 7475-T7351 pressure test that included the arrest of a two-bay longitudinal crack, and a measure of residual strength for a two-bay crack centered on a broken frame. Analysis predictions for the two-bay longitudinal crack panel correlated well with the test results. Analysis activity conducted by the IAS team strongly indicates that current analysis tools predict integral structural behavior as accurately as built-up structure. The cost study results indicated that, compared to built-up fabrication methods, high-speed machining structure from aluminum plate would yield a recurring cost savings of 61%. Part count dropped from 78 individual parts on a baseline panel to just 7 parts for machined IAS structure.

Ultrasonic airborne insertion loss measurements at normal incidence (L).

PubMed

Farley, Jayrin; Anderson, Brian E

2010-12-01

Transmission loss and insertion loss measurements of building materials at audible frequencies are commonly made using plane wave tubes or as a panel between reverberant rooms. These measurements provide information for noise isolation control in architectural acoustics and in product development. Airborne ultrasonic sound transmission through common building materials has not been fully explored. Technologies and products that utilize ultrasonic frequencies are becoming increasingly more common, hence the need to conduct such measurements. This letter presents preliminary measurements of the ultrasonic insertion loss levels for common building materials over a frequency range of 28-90 kHz using continuous-wave excitation.

Radiolocation Techniques (Les Techniques de Radiolocalisation). Papers Presented at the Electromagnetic Wave Propagation Panel Symposium Held in London, England on 1-5 Jun 92

DTIC Science & Technology

1992-11-01

coivergence. PROPAGATION CHARACTERISTICS OF THE IONOSPHERIC TRANSMISSION WINDOW RELATING TO LONG WAVE RADIO LOCATION ISSUES Paul A. Kossey Phillips...aý iteil wed as tt~onthi. ’o~ar li: i i~e froiti Janitarx 1:1hiý t brotuli FeI,riiar% 󈧕l, withi 1\\: trott I) o~ .- o ; , ::tr--t’rh -li- axitnuti...the great circle path at the midpoint. meters on a leg. Both arrays are in an "L" Experimental evidence ( Paul , 1985)indicates configuration using seven

Terrestrial Propagation Characteristics in Modern Systems of Communications, Surveillance, Guidance and Control, Proceedings of the Electromagnetic Wave Propagation Panel Specialists’ Meeting Held in Ottawa (Canada) on 20-24 October 1986

DTIC Science & Technology

1987-11-01

symoposlium lJi S. t ), Ctharacteristics of fan do to ducts And quantitative estimation "of fading. Rev. ( loc . CeLab. (Apa). Vel. 0,N. 8-6, pp. 319-360...reflect)rCecv cmnnp4-ettt ~ ~ ~ ~ ~ ~ 4 offedsre$(.4) i.c. T iindj ocsisi of Itheisemlie vettiAcii powerC lOC (P tV in th VAse of two-wamy recpIkat Ftx th4...strength were measured. Figure 4.)10 and 4.11 show the theoretical and inea.sur-d value. Mmeasuird Fading Depth was in tie rang el 10 d$ Bito 25 dBJ lI

Thomson-Scattering Study of the Subharmonic Decay of Ion-Acoustic Waves Driven by the Brillouin Instability

NASA Astrophysics Data System (ADS)

Bandulet, H. C.; Labaune, C.; Lewis, K.; Depierreux, S.

2004-07-01

Thomson scattering (TS) has been used to investigate the two-ion decay instability of ion acoustic waves generated by stimulated Brillouin scattering in an underdense CH plasma. Two complementary TS diagnostics, spectrally and spatially resolved, demonstrate the occurrence of the subharmonic decay of the primary ion acoustic wave into two secondary waves. The study of the laser intensity dependence shows that the secondary ion acoustic waves are correlated with the SBS reflectivity saturation, at a level of a few percent.

Time-domain hybrid method for simulating large amplitude motions of ships advancing in waves

NASA Astrophysics Data System (ADS)

Liu, Shukui; Papanikolaou, Apostolos D.

2011-03-01

Typical results obtained by a newly developed, nonlinear time domain hybrid method for simulating large amplitude motions of ships advancing with constant forward speed in waves are presented. The method is hybrid in the way of combining a time-domain transient Green function method and a Rankine source method. The present approach employs a simple double integration algorithm with respect to time to simulate the free-surface boundary condition. During the simulation, the diffraction and radiation forces are computed by pressure integration over the mean wetted surface, whereas the incident wave and hydrostatic restoring forces/moments are calculated on the instantaneously wetted surface of the hull. Typical numerical results of application of the method to the seakeeping performance of a standard containership, namely the ITTC S175, are herein presented. Comparisons have been made between the results from the present method, the frequency domain 3D panel method (NEWDRIFT) of NTUA-SDL and available experimental data and good agreement has been observed for all studied cases between the results of the present method and comparable other data.

GPS-Acoustic Seafloor Geodesy using a Wave Glider

NASA Astrophysics Data System (ADS)

Chadwell, C. D.

2013-12-01

The conventional approach to implement the GPS-Acoustic technique uses a ship or buoy for the interface between GPS and Acoustics. The high cost and limited availability of ships restricts occupations to infrequent campaign-style measurements. A new approach to address this problem uses a remote controlled, wave-powered sea surface vehicle, the Wave Glider. The Wave Glider uses sea-surface wave action for forward propulsion with both upward and downward motions producing forward thrust. It uses solar energy for power with solar panels charging the onboard 660 W-h battery for near continuous operation. It uses Iridium for communication providing command and control from shore plus status and user data via the satellite link. Given both the sea-surface wave action and solar energy are renewable, the vehicle can operate for extended periods (months) remotely. The vehicle can be launched from a small boat and can travel at ~ 1 kt to locations offshore. We have adapted a Wave Glider for seafloor geodesy by adding a dual frequency GPS receiver embedded in an Inertial Navigation Unit, a second GPS antenna/receiver to align the INU, and a high precision acoustic ranging system. We will report results of initial testing of the system conducted at SIO. In 2014, the new approach will be used for seafloor geodetic measurements of plate motion in the Cascadia Subduction Zone. The project is for a three-year effort to measure plate motion at three sites along an East-West profile at latitude 44.6 N, offshore Newport Oregon. One site will be located on the incoming plate to measure the present day convergence between the Juan de Fuca and North American plates and two additional sites will be located on the continental slope of NA to measure the elastic deformation due to stick-slip behavior on the mega-thrust fault. These new seafloor data will constrain existing models of slip behavior that presently are poorly constrained by land geodetic data 100 km from the deformation front.

Space shuttle I-tube radiator testing at Johnson Space Center, May 1976, volume 1

NASA Technical Reports Server (NTRS)

Scheps, P. B.

1976-01-01

During the two weeks of thermal vacuum testing a representative forward panel was successfully operated in a variety of simulated environmental conditions. Performance limits for both high and low load operations were established. Confidence in the stable operation of the panel throughout its typical operating range was verified by the testing, and design studies were conducted to analyze the effects of the payload bay door, and the panel deployment angle, on performance.

The Arena System: a novel shared touch-panel apparatus for the study of chimpanzee social interaction and cognition.

PubMed

Martin, Christopher Flynn; Biro, Dora; Matsuzawa, Tetsuro

2014-09-01

We report on the development of a novel shared touch-panel apparatus for examining a diverse range of topics in great ape social cognition and interaction. Our apparatus-named the Arena System-is composed of a single multitouch monitor that spans across two separate testing booths, so that individuals situated in each booth have tactile access to half of the monitor and visual access to the whole monitor. Additional components of the system include a smart-film barrier able to restrict visual access between the booths, as well as two automated feeding devices that dispense food rewards to the subjects. The touch-panel, smart-film, and feeders are controlled by a PC that is also responsible for running the experimental tasks. We present data from a pilot behavioral game theory study with two chimpanzees in order to illustrate the efficacy of our method, and we suggest applications for a range of topics including animal social learning, coordination, and behavioral economics. The system enables fully automated experimental procedures, which means that no human participation is needed to run the tasks. The novel use of a touch-panel in a social setting allows for a finer degree of data resolution than do the traditional experimental apparatuses used in prior studies on great ape social interaction.

The fractal characteristic of facial anthropometric data for developing PCA fit test panels for youth born in central China.

PubMed

Yang, Lei; Wei, Ran; Shen, Henggen

2017-01-01

New principal component analysis (PCA) respirator fit test panels had been developed for current American and Chinese civilian workers based on anthropometric surveys. The PCA panels used the first two principal components (PCs) obtained from a set of 10 facial dimensions. Although the PCA panels for American and Chinese subjects adopted the bivairate framework with two PCs, the number of the PCs retained in the PCA analysis was different between Chinese subjects and Americans. For the Chinese youth group, the third PC should be retained in the PCA analysis for developing new fit test panels. In this article, an additional number label (ANL) is used to explain the third PC in PCA analysis when the first two PCs are used to construct the PCA half-facepiece respirator fit test panel for Chinese group. The three-dimensional box-counting method is proposed to estimate the ANLs by calculating fractal dimensions of the facial anthropometric data of the Chinese youth. The linear regression coefficients of scale-free range R 2 are all over 0.960, which demonstrates that the facial anthropometric data of the Chinese youth has fractal characteristic. The youth subjects born in Henan province has an ANL of 2.002, which is lower than the composite facial anthropometric data of Chinese subjects born in many provinces. Hence, Henan youth subjects have the self-similar facial anthropometric characteristic and should use the particular ANL (2.002) as the important tool along with using the PCA panel. The ANL method proposed in this article not only provides a new methodology in quantifying the characteristics of facial anthropometric dimensions for any ethnic/racial group, but also extends the scope of PCA panel studies to higher dimensions.

Compression After Impact on Honeycomb Core Sandwich Panels With Thin Facesheets. Part 1; Experiments

NASA Technical Reports Server (NTRS)

McQuigg, Thomas D.; Kapania, Rakesh K.; Scotti, Stephen J.; Walker, Sandra P.

2012-01-01

A two part research study has been completed on the topic of compression after impact (CAI) of thin facesheet honeycomb core sandwich panels. The research has focused on both experiments and analysis in an effort to establish and validate a new understanding of the damage tolerance of these materials. Part one, the subject of the current paper, is focused on the experimental testing. Of interest are sandwich panels, with aerospace applications, which consist of very thin, woven S2-fiberglass (with MTM45-1 epoxy) facesheets adhered to a Nomex honeycomb core. Two sets of specimens, which were identical with the exception of the density of the honeycomb core, were tested. Static indentation and low velocity impact using a drop tower are used to study damage formation in these materials. A series of highly instrumented CAI tests was then completed. New techniques used to observe CAI response and failure include high speed video photography, as well as digital image correlation (DIC) for full-field deformation measurement. Two CAI failure modes, indentation propagation, and crack propagation, were observed. From the results, it can be concluded that the CAI failure mode of these panels depends solely on the honeycomb core density.

Analysis and Tests of Reinforced Carbon-Epoxy/Foam-Core Sandwich Panels with Cutouts

NASA Technical Reports Server (NTRS)

Baker, Donald J.; Rogers, Charles

1996-01-01

The results of a study of a low-cost structurally efficient minimum-gage shear-panel design that can be used in light helicopters are presented. The shear-panel design is based on an integrally stiffened syntactic-foam stabilized-skin with an all-bias-ply tape construction for stabilized-skin concept with an all-bias-ply tape construction for the skins. This sandwich concept is an economical way to increase the panel bending stiffness weight penalty. The panels considered in the study were designed to be buckling resistant up to 100 lbs/in. of shear load and to have an ultimate strength of 300 lbs/in. The panel concept uses unidirectional carbon-epoxy tape on a syntactic adhesive as a stiffener that is co-cured with the skin and is an effective concept for improving panel buckling strength. The panel concept also uses pultruded carbon-epoxy rods embedded in a syntactic adhesive and over-wrapped with a bias-ply carbon-epoxy tape to form a reinforcing beam which is an effective method for redistributing load around rectangular cutout. The buckling strength of the reinforced panels is 83 to 90 percent of the predicted buckling strength based on a linear buckling analysis. The maximum experimental deflection exceeds the maximum deflection predicted by a nonlinear analysis by approximately one panel thickness. The failure strength of the reinforced panels was two and a half to seven times of the buckling strength. This efficient shear-panel design concept exceeds the required ultimate strength requirement of 300 lbs/in by more than 100 percent.

Inter-laboratory assessment by trained panelists from France and the United Kingdom of beef cooked at two different end-point temperatures.

PubMed

Gagaoua, Mohammed; Micol, Didier; Picard, Brigitte; Terlouw, Claudia E M; Moloney, Aidan P; Juin, Hervé; Meteau, Karine; Scollan, Nigel; Richardson, Ian; Hocquette, Jean-François

2016-12-01

Eating quality of the same meat samples from different animal types cooked at two end-point cooking temperatures (55°C and 74°C) was evaluated by trained panels in France and the United Kingdom. Tenderness and juiciness scores were greater at 55°C than at 74°C, irrespective of the animal type and location of the panel. The UK panel, independently of animal type, gave greater scores for beef flavour (+7 to +24%, P<0.001) but lower scores for abnormal flavour (-10 to -17%, P<0.001) at 74°C. Abnormal flavour score by the French panel was higher at 74°C than at 55°C (+26%, P<0.001). Irrespective of the data set, tenderness was correlated with juiciness and beef flavour. Overall, this study found that cooking beef at a lower temperature increased tenderness and juiciness, irrespective of the location of the panel. In contrast, cooking beef at higher temperatures increased beef flavour and decreased abnormal flavour for the UK panelists but increased abnormal flavour for the French panel. Copyright © 2016 Elsevier Ltd. All rights reserved.

A Comparative Study of the Perceptions of Professional Staff on Their Contribution to Student Outcomes

ERIC Educational Resources Information Center

Regan, Julie-Anne; Dollard, Emma; Banks, Nicci

2014-01-01

This study examined the perceptions of professional staff on their contribution to student outcomes. An online Delphi survey method was used to collect data from two expert panels: professional staff based in faculties and professional staff based in central university departments. The aim of this method is for the panels to reach consensus. The…

Impact of national smoke-free legislation on home smoking bans – Findings from the International Tobacco Control (ITC) Policy Evaluation Project Europe Surveys

PubMed Central

Mons, Ute; Nagelhout, Gera E.; Allwright, Shane; Guignard, Romain; van den Putte, Bas; Willemsen, Marc C.; Fong, Geoffrey T.; Brenner, Hermann; Pötschke-Langer, Martina; Breitling, Lutz P.

2014-01-01

Objectives To measure changes in prevalence and predictors of home smoking bans (HSB) among smokers in four European countries after the implementation of national smoke-free legislation. Design Two waves of the International Tobacco Control (ITC) Policy Evaluation Project Europe Surveys, which is a prospective panel study. Pre- and post-legislation data was used from Ireland, France, Germany, and the Netherlands. Two pre-legislation waves from UK were used as control. Participants 4,634 respondents from the intervention countries and 1,080 from the control country completed both baseline and follow-up, and were included in the present analyses. Methods Multiple logistic regression models to identify predictors of having or of adopting a total HSB, and Generalised Estimating Equation (GEE) models to compare patterns of change after implementation of smoke-free legislation to a control country without such legislation. Results Most smokers had at least partial smoking restrictions in their home, but the proportions varied significantly between countries. After implementation of national smoke-free legislation, the proportion of smokers with a total HSB increased significantly in all four countries. Among continuing smokers the number of cigarettes smoked per day either remained stable or decreased significantly. Multiple logistic regression models indicated that having a young child in the household and supporting smoking bans in bars were important correlates of having a pre-legislation HSB. Prospective predictors of imposing a HSB between survey waves were planning to quit smoking, supporting a total smoking ban in bars, and the birth of a child. GEE models indicated that the change in total HSB in the intervention countries was greater than in the control country. Conclusions The findings suggest that smoke-free legislation does not lead to more smoking in smokers’ homes. On the contrary, our findings demonstrate that smoke-free legislation may stimulate smokers to establish total smoking bans in their homes. PMID:22331456

Impact of national smoke-free legislation on home smoking bans: findings from the International Tobacco Control Policy Evaluation Project Europe Surveys.

PubMed

Mons, Ute; Nagelhout, Gera E; Allwright, Shane; Guignard, Romain; van den Putte, Bas; Willemsen, Marc C; Fong, Geoffrey T; Brenner, Hermann; Pötschke-Langer, Martina; Breitling, Lutz P

2013-05-01

To measure changes in prevalence and predictors of home smoking bans (HSBs) among smokers in four European countries after the implementation of national smoke-free legislation. Two waves of the International Tobacco Control Policy Evaluation Project Europe Surveys, which is a prospective panel study. Pre- and post-legislation data were used from Ireland, France, Germany and the Netherlands. Two pre-legislation waves from the UK were used as control. 4634 respondents from the intervention countries and 1080 from the control country completed both baseline and follow-up and were included in the present analyses. Multiple logistic regression models to identify predictors of having or of adopting a total HSB, and Generalised Estimating Equation models to compare patterns of change after implementation of smoke-free legislation to a control country without such legislation. Most smokers had at least partial smoking restrictions in their home, but the proportions varied significantly between countries. After implementation of national smoke-free legislation, the proportion of smokers with a total HSB increased significantly in all four countries. Among continuing smokers, the number of cigarettes smoked per day either remained stable or decreased significantly. Multiple logistic regression models indicated that having a young child in the household and supporting smoking bans in bars were important correlates of having a pre-legislation HSB. Prospective predictors of imposing a HSB between survey waves were planning to quit smoking, supporting a total smoking ban in bars and the birth of a child. Generalised Estimating Equation models indicated that the change in total HSB in the intervention countries was greater than that in the control country. The findings suggest that smoke-free legislation does not lead to more smoking in smokers' homes. On the contrary, our findings demonstrate that smoke-free legislation may stimulate smokers to establish total smoking bans in their homes.

Do time-invariant confounders explain away the association between job stress and workers' mental health? Evidence from Japanese occupational panel data.

PubMed

Oshio, Takashi; Tsutsumi, Akizumi; Inoue, Akiomi

2015-02-01

It is well known that job stress is negatively related to workers' mental health, but most recent studies have not controlled for unobserved time-invariant confounders. In the current study, we attempted to validate previous observations on the association between job stress and workers' mental health, by removing the effects of unobserved time-invariant confounders. We used data from three to four waves of an occupational Japanese cohort survey, focusing on 31,382 observations of 9741 individuals who participated in at least two consecutive waves. We estimated mean-centered fixed effects models to explain psychological distress in terms of the Kessler 6 (K6) scores (range: 0-24) by eight job stress indicators related to the job demands-control, effort-reward imbalance, and organizational injustice models. Mean-centered fixed effects models reduced the magnitude of the association between jobs stress and K6 scores to 44.8-54.2% of those observed from pooled ordinary least squares. However, the association remained highly significant even after controlling for unobserved time-invariant confounders for all job stress indicators. In addition, alternatively specified models showed the robustness of the results. In all, we concluded that the validity of major job stress models, which link job stress and workers' mental health, was robust, although unobserved time-invariant confounders led to an overestimation of the association. Copyright © 2014 Elsevier Ltd. All rights reserved.

Reponse Dynamique D'un Panneau Soumis a un Environnement Acoustique Reverberant

NASA Astrophysics Data System (ADS)

Nelisse, Hugues

1995-01-01

The present thesis deals with the problem of the dynamic response of a homeogenous flexible panel immersed in a reverberant field. This problem takes place in the framework of aerospace problems in which satellites substructures are submitted to high acoustic levels during the launchers lift-off. The thesis is divided in four main parts. The first one presents an integral formulation that allows to treat the case of a flexible panel placed in a rectangular room. A semi-analytical resolution is used to identify the two main physical unknowns of the problem, the acoustic pressure jump across the panel and the panel deflection. The second part is dedicated to the study of the notion of diffuse field. Through a bibliographic review, two indicators are used to characterize the sound field in the room and in the free field. Precise criterions related to the modal density of the room are discussed. Analysis and discussion on the conditions which allow the establishment of a diffuse field are also presented. In the third part, a theoretical formulation which allows to treat the problem of an unbaffled panel submitted to an acoustic excitation in the free field is presented. The singularity problem due to the use of the free-space Green's function is overcame by the use of a variational principle. A semi-analytical approach is used to solve the linear system of equations. Emphasis is put on the fact that the excitation is acoustic. The theory is validated with the help of an existing boundary element numerical code. The last part is first dedicated to a comparative study of the two developed approaches and to a phenomenological study. Studies of the effect of the structural damping on the panel vibrations are presented as well as analysis of some different approximations generally used in this type of problem.

Metacognition, risk behavior, and risk outcomes: the role of perceived intelligence and perceived knowledge.

PubMed

Jaccard, James; Dodge, Tonya; Guilamo-Ramos, Vincent

2005-03-01

The present study explores 2 key variables in social metacognition: perceived intelligence and perceived levels of knowledge about a specific content domain. The former represents a judgment of one's knowledge at an abstract level, whereas the latter represents a judgment of one's knowledge in a specific content domain. Data from interviews of approximately 8,411 female adolescents from a national sample were analyzed in a 2-wave panel design with a year between assessments. Higher levels of perceived intelligence at Wave 1 were associated with a lower probability of the occurrence of a pregnancy over the ensuing year independent of actual IQ, self-esteem, and academic aspirations. Higher levels of perceived knowledge about the accurate use of birth control were associated with a higher probability of the occurrence of a pregnancy independent of actual knowledge about accurate use, perceived intelligence, self-esteem, and academic aspirations.

Adolescents' Social Network Site Use, Peer Appearance-Related Feedback, and Body Dissatisfaction: Testing a Mediation Model.

PubMed

de Vries, Dian A; Peter, Jochen; de Graaf, Hanneke; Nikken, Peter

2016-01-01

Previous correlational research indicates that adolescent girls who use social network sites more frequently are more dissatisfied with their bodies. However, we know little about the causal direction of this relationship, the mechanisms underlying this relationship, and whether this relationship also occurs among boys to the same extent. The present two-wave panel study (18 month time lag) among 604 Dutch adolescents (aged 11-18; 50.7% female; 97.7% native Dutch) aimed to fill these gaps in knowledge. Structural equation modeling showed that social network site use predicted increased body dissatisfaction and increased peer influence on body image in the form of receiving peer appearance-related feedback. Peer appearance-related feedback did not predict body dissatisfaction and thus did not mediate the effect of social network site use on body dissatisfaction. Gender did not moderate the findings. Hence, social network sites can play an adverse role in the body image of both adolescent boys and girls.

Bridge Over an Aging Population: Examining Longitudinal Relations Among Human Resource Management, Social Support, and Employee Outcomes Among Bridge Workers.

PubMed

Veth, Klaske N; Van der Heijden, Beatrice I J M; Korzilius, Hubert P L M; De Lange, Annet H; Emans, Ben J M

2018-01-01

This two-wave complete panel study aims to examine human resource management (HRM) bundles of practices in relation to social support [i.e., leader-member exchange (LMX), coworker exchange (CWX)] and employee outcomes (i.e., work engagement, employability, and health), within a context of workers aged 65+. Based upon the social exchange theory and the Job Demands-Resources (JD-R) framework, it was hypothesized that HRM bundles at Time 1 would increase bridge workers' outcomes at Time 2, and that this relationship would be mediated by perceptions of LMX and CWX at Time 2. Using a longitudinal design, hypotheses were tested in a unique sample of Dutch bridge employees ( N = 228). Results of several structural equation modeling analyses revealed no significant associations between HRM bundles, and social support, moreover, no significant associations were found in relation to employee outcomes. However, the results of the best-fitting final model revealed the importance of the impact of social support on employee (65+) outcomes over time.

Consideration of some factors affecting low-frequency fuselage noise transmission for propeller aircraft

NASA Technical Reports Server (NTRS)

Mixson, J. S.; Roussos, L. A.

1986-01-01

Possible reasons for disagreement between measured and predicted trends of sidewall noise transmission at low frequency are investigated using simplified analysis methods. An analytical model combining incident plane acoustic waves with an infinite flat panel is used to study the effects of sound incidence angle, plate structural properties, frequency, absorption, and the difference between noise reduction and transmission loss. Analysis shows that these factors have significant effects on noise transmission but they do not account for the differences between measured and predicted trends at low frequencies. An analytical model combining an infinite flat plate with a normally incident acoustic wave having exponentially decaying magnitude along one coordinate is used to study the effect of a localized source distribution such as is associated with propeller noise. Results show that the localization brings the predicted low-frequency trend of noise transmission into better agreement with measured propeller results. This effect is independent of low-frequency stiffness effects that have been previously reported to be associated with boundary conditions.

The concurrent and longitudinal relationships between adolescents' use of social network sites and their social self-esteem.

PubMed

Valkenburg, Patti M; Koutamanis, Maria; Vossen, Helen G M

2017-11-01

The first aim of this study was to investigate the concurrent and longitudinal relationships between adolescents' use of social network sites (SNSs) and their social self-esteem. The second aim was to investigate whether the valence of the feedback that adolescents receive on SNSs can explain these relationships. We conducted a three-wave panel study among 852 pre- and early adolescents (10-15 years old). In line with earlier research, we found significant concurrent correlations between adolescents' SNS use and their social self-esteem in all three data waves. The longitudinal results only partly confirmed these concurrent findings: Adolescents' initial SNS use did not significantly influence their social self-esteem in subsequent years. In contrast, their initial social self-esteem consistently influenced their SNS use in subsequent years. The valence of online feedback from close friends and acquaintances explained the concurrent relationship between SNS use and social self-esteem, but not the longitudinal relationship. Results are discussed in terms of their methodological and theoretical implications.

Buckling Testing and Analysis of Honeycomb Sandwich Panel Arc Segments of a Full-Scale Fairing Barrel. Part 2; 6-Ply In-Autoclave Facesheets

NASA Technical Reports Server (NTRS)

Pineda, Evan J.; Meyers, David E.; Kosareo, Daniel N.; Zalewski, Bart F.; Dixon, Genevieve D.

2013-01-01

Four honeycomb sandwich panel types, representing 1/16th arc segments of a 10-m diameter barrel section of the Heavy Lift Launch Vehicle (HLLV), were manufactured and tested under the NASA Composites for Exploration program and the NASA Constellation Ares V program. Two configurations were chosen for the panels: 6-ply facesheets with 1.125 in. honeycomb core and 8-ply facesheets with 1.000 in. honeycomb core. Additionally, two separate carbon fiber/epoxy material systems were chosen for the facesheets: in-autoclave IM7/977-3 and out-of-autoclave T40-800b/5320-1. Smaller 3- by 5-ft panels were cut from the 1/16th barrel sections. These panels were tested under compressive loading at the NASA Langley Research Center (LaRC). Furthermore, linear eigenvalue and geometrically nonlinear finite element analyses were performed to predict the compressive response of each 3- by 5-ft panel. This manuscript summarizes the experimental and analytical modeling efforts pertaining to the panels composed of 6-ply, IM7/977-3 facesheets (referred to as Panels B-1 and B-2). To improve the robustness of the geometrically nonlinear finite element model, measured surface imperfections were included in the geometry of the model. Both the linear and nonlinear models yield good qualitative and quantitative predictions. Additionally, it was correctly predicted that the panel would fail in buckling prior to failing in strength. Furthermore, several imperfection studies were performed to investigate the influence of geometric imperfections, fiber angle misalignments, and three-dimensional (3-D) effects on the compressive response of the panel.

Buckling Testing and Analysis of Honeycomb Sandwich Panel Arc Segments of a Full-Scale Fairing Barrel Part 1: 8-Ply In-Autoclave Facesheets. Part 1; 8-Ply In-Autoclave Facesheets

NASA Technical Reports Server (NTRS)

Myers, David E.; Pineda, Evan J.; Zalewski, Bart F.; Kosareo, Daniel N.; Kellas, Sotiris

2013-01-01

Four honeycomb sandwich panels, representing 1/16th arc segments of a 10-m diameter barrel section of the heavy lift launch vehicle, were manufactured under the NASA Composites for Exploration program and the NASA Space Launch Systems program. Two configurations were chosen for the panels: 6-ply facesheets with 1.125 in. honeycomb core and 8-ply facesheets with 1.000 in. honeycomb core. Additionally, two separate carbon fiber/epoxy material systems were chosen for the facesheets: inautoclave IM7/977-3 and out-of-autoclave T40-800b/5320-1. Smaller 3.00- by 5.00-ft panels were cut from the 1/16th barrel sections. These panels were tested under compressive loading at the NASA Langley Research Center. Furthermore, linear eigenvalue and geometrically nonlinear finite element analysis was performed to predict the compressive response of the 3.00- by 5.00-ft panels. This manuscript summarizes the experimental and analytical modeling efforts pertaining to the panel composed of 8-ply, IM7/977-3 facesheets (referred to Panel A). To improve the robustness of the geometrically nonlinear finite element model, measured surface imperfections were included in the geometry of the model. Both the linear and nonlinear models yield good qualitative and quantitative predictions. Additionally, it was predicted correctly that the panel would fail in buckling prior to failing in strength. Furthermore, several imperfection studies were performed to investigate the influence of geometric imperfections, fiber misalignments, and three-dimensional (3 D) effects on the compressive response of the panel.

Terahertz imaging systems: a non-invasive technique for the analysis of paintings

NASA Astrophysics Data System (ADS)

Fukunaga, K.; Hosako, I.; Duling, I. N., III; Picollo, M.

2009-07-01

Terahertz (THz) imaging is an emerging technique for non-invasive analysis. Since THz waves can penetrate opaque materials, various imaging systems that use THz waves have been developed to detect, for instance, concealed weapons, illegal drugs, and defects in polymer products. The absorption of THz waves by water is extremely strong, and hence, THz waves can be used to monitor the water content in various objects. THz imaging can be performed either by transmission or by reflection of THz waves. In particular, time domain reflection imaging uses THz pulses that propagate in specimens, and in this technique, pulses reflected from the surface and from the internal boundaries of the specimen are detected. In general, the internal structure is observed in crosssectional images obtained using micro-specimens taken from the work that is being analysed. On the other hand, in THz time-domain imaging, a map of the layer of interest can be easily obtained without collecting any samples. When realtime imaging is required, for example, in the investigation of the effect of a solvent or during the monitoring of water content, a THz camera can be used. The first application of THz time-domain imaging in the analysis of a historical tempera masterpiece was performed on the panel painting Polittico di Badia by Giotto, of the permanent collection of the Uffizi Gallery. The results of that analysis revealed that the work is composed of two layers of gypsum, with a canvas between these layers. In the paint layer, gold foils covered by paint were clearly observed, and the consumption or ageing of gold could be estimated by noting the amount of reflection. These results prove that THz imaging can yield useful information for conservation and restoration purposes.

Laboratory study of PCB transport from primary sources to settled dust.

PubMed

Liu, Xiaoyu; Guo, Zhishi; Krebs, Kenneth A; Greenwell, Dale J; Roache, Nancy F; Stinson, Rayford A; Nardin, Joshua A; Pope, Robert H

2016-04-01

Dust is an important sink for indoor air pollutants, such as polychlorinated biphenyls (PCBs) that were used in building materials and products. In this study, two types of dust, house dust and Arizona Test Dust, were tested in a 30-m(3) stainless steel chamber with two types of panels. The PCB-containing panels were aluminum sheets coated with a PCB-spiked primer or caulk. The PCB-free panels were coated with the same materials but without PCBs. The dust evenly spread on each panel was collected at different times to determine its PCB content. The data from the PCB panels were used to evaluate the PCB migration from the source to the dust through direct contact, and the data from the PCB-free panels were used to evaluate the sorption of PCBs through the dust/air partition. Settled dust can adsorb PCBs from air. The sorption concentration was dependent on the congener concentration in the air and favored less volatile congeners. When the house dust was in direct contact with the PCB-containing panel, PCBs migrated into the dust at a much faster rate than the PCB transfer rate due to the dust/air partition. The dust/source partition was not significantly affected by the congener's volatility. For a given congener, the ratio between its concentration in the dust and in the source was used to estimate the dust/source partition coefficient. The estimated values ranged from 0.04 to 0.16. These values are indicative of the sink strength of the tested house dust being in the middle or lower-middle range. Published by Elsevier Ltd.

Development of sheet-metal parabolic-trough reflector panels

NASA Astrophysics Data System (ADS)

Biester, A. W.

1982-06-01

Efforts to develop accurate, durable, and mass producible sheet metal parabolic trough solar collectors and the associated support for the collectors are described. The design considered is similar to an automobile hood, a two-piece sheet metal structure consisting of a formed steel frame or stiffening panel and a smooth contoured skin. The two pieces may be bonded or welded to form a rigid structure, and a reflective surface applied such as a film, glass mirror, or any of the presently utilized materials. The work encompassed material selection, adhesive selection and testing, tool design and fabrication, prototype panel production, and design and development of torque tube assemblies on which the trough is inclined. Results of adhesive bonding studies are given. It is found that high volume technology can be used to produce accurate and structurally sound reflector panels, and one configuration was selected for fabrication in suitable quantities for performance testing.

Preliminary evaluation of hybrid titanium composite laminates

NASA Technical Reports Server (NTRS)

Miller, J. L.; Progar, D. J.; Johnson, W. S.; St.clair, T. L.

1994-01-01

In this study, the mechanical response of hybrid titanium composite laminates (HTCL) was evaluated at room and elevated temperatures. Also, the use of an elastic-plastic laminate analysis program for predicting the tensile response from constituent properties was verified. The improvement in mechanical properties achieved by the laminates was assessed by comparing the results of static strength and constant amplitude fatigue tests to those for monolithic titanium sheet. Two HTCL were fabricated with different fiber volume fractions, resin layer thicknesses, and resins. One panel was thicker and was more poorly bonded in comparison to other. Consequently, the former had a lower tensile strength, while fewer cracks grew in this panel and at a slower rate. Both panels showed an improvement in fatigue life of almost two orders of magnitude. The model predictions were also in good agreement with the experimental results for both HTCL panels.

Rules of Attraction

NASA Technical Reports Server (NTRS)

2004-01-01

This image composite shows two of the Mars Exploration Rover Opportunity's magnets, the 'capture' magnet (upper portion of left panel) and the 'filter' magnet (lower portion of left panel). Scientists use these tools to study the origins of martian dust in the atmosphere. The left panel was taken by the rover's panoramic camera. The four panels to the right, taken by the microscopic imager, show close-up views of the two magnets. The bull's-eye appearance of the capture magnet is a result of alternating magnetic fields, which are used to increase overall magnetic force. The filter magnet lacks these alternating fields and consequently produces a weaker magnetic force. This weaker force selectively attracts only strong magnetic particles.

Scientists were surprised by the large dark particles on the magnets because airborne particles are smaller in size. They theorize that these spots might be aggregates of small particles that clump together in a magnetic field.

Inequalities in oral health among adolescents in Gangneung, South Korea.

PubMed

Jung, Se-Hwan; Kim, Myoung-Hee; Ryu, Jae-In

2018-04-24

This study aims to evaluate inequality in oral health among adolescents and to explain the mechanisms of such inequalities in Gangneung, South Korea. One thousand two hundred sixty-seven students in their first year from four vocational and three general schools participated in the baseline survey of 2011, and 84.7% of them were surveyed again in 2013. Oral examinations by the same dentist and a self-administered questionnaire were repeated during both waves. Outcome measure for oral health was the existence of untreated dental caries (DT). As socioeconomic position (SEP) indicators, school type (general vs. vocational), father's and mother's education, perceived economic status, and Family Affluence Scale (FAS) were measured. Variables measuring oral health related behaviours included tooth brushing frequency, frequency of eating snacks and drinking sodas, smoking, and annual visits to dental clinics. Chi-square tests and panel logistic regression were adopted to examine the associations between dental caries and SEP indicators by STATA version 15.1. Having a less educated father and attending a vocational school were significant predictors for untreated caries after controlling for SEP indicators. However, students from general schools, higher SEP by father's education, perceived economic status, or FAS, or having non-smoking experience or annual visits to dental clinics were more likely to stay caries-free. There were socioeconomic inequalities in oral health on an adolescent panel. Given that oral health status during adolescents can persist throughout the course of a person's life, intervention to tackle such inequalities and school environments are required.

Age differences in the association between stressful work and sickness absence among full-time employed workers: evidence from the German socio-economic panel.

PubMed

Götz, Simon; Hoven, Hanno; Müller, Andreas; Dragano, Nico; Wahrendorf, Morten

2018-05-01

We aim to extend current knowledge on associations between stressful work and sickness absence, first, by studying associations between ERI and sickness absence among full-time employees from various occupations, and second, by investigating if associations vary by age. We use data from four waves of the German socio-economic panel (GSOEP), collected among men and women between 2006 and 2012, with 9418 observations. Stressful work is measured with a short form of the ERI questionnaire. We investigate an imbalance between effort and reward (ER ratio) as well as the two main components ("high effort" and "low reward"). Sickness absence is measured by self-reported number of sickness days (assessed the following year). After descriptive analyses, we estimate a series of multivariable regressions, including tests for interactions between age and work stress. Each of the three indicators of stressful work is related to higher number of sickness days, with except of "high effort" in case of men. Findings remain significant after adjusting for social position (income, education and occupational class) and health. In addition, for both men and women, associations were slightly higher among older workers, though interactions did not reach statistical significance. Our findings support that stressful work is linked to sickness absence across a wide spectrum of jobs with varying incomes and educational levels, and also that associations are slightly more pronounced among older workers.

(Pea)nuts and bolts of visual narrative: Structure and meaning in sequential image comprehension

PubMed Central

Cohn, Neil; Paczynski, Martin; Jackendoff, Ray; Holcomb, Phillip J.; Kuperberg, Gina R.

2012-01-01

Just as syntax differentiates coherent sentences from scrambled word strings, the comprehension of sequential images must also use a cognitive system to distinguish coherent narrative sequences from random strings of images. We conducted experiments analogous to two classic studies of language processing to examine the contributions of narrative structure and semantic relatedness to processing sequential images. We compared four types of comic strips: 1) Normal sequences with both structure and meaning, 2) Semantic Only sequences (in which the panels were related to a common semantic theme, but had no narrative structure), 3) Structural Only sequences (narrative structure but no semantic relatedness), and 4) Scrambled sequences of randomly-ordered panels. In Experiment 1, participants monitored for target panels in sequences presented panel-by-panel. Reaction times were slowest to panels in Scrambled sequences, intermediate in both Structural Only and Semantic Only sequences, and fastest in Normal sequences. This suggests that both semantic relatedness and narrative structure offer advantages to processing. Experiment 2 measured ERPs to all panels across the whole sequence. The N300/N400 was largest to panels in both the Scrambled and Structural Only sequences, intermediate in Semantic Only sequences and smallest in the Normal sequences. This implies that a combination of narrative structure and semantic relatedness can facilitate semantic processing of upcoming panels (as reflected by the N300/N400). Also, panels in the Scrambled sequences evoked a larger left-lateralized anterior negativity than panels in the Structural Only sequences. This localized effect was distinct from the N300/N400, and appeared despite the fact that these two sequence types were matched on local semantic relatedness between individual panels. These findings suggest that sequential image comprehension uses a narrative structure that may be independent of semantic relatedness. Altogether, we argue that the comprehension of visual narrative is guided by an interaction between structure and meaning. PMID:22387723

Generation of long subharmonic internal waves by surface waves

NASA Astrophysics Data System (ADS)

Tahvildari, Navid; Kaihatu, James M.; Saric, William S.

2016-10-01

A new set of Boussinesq equations is derived to study the nonlinear interactions between long waves in a two-layer fluid. The fluid layers are assumed to be homogeneous, inviscid, incompressible, and immiscible. Based on the Boussinesq equations, an analytical model is developed using a second-order perturbation theory and applied to examine the transient evolution of a resonant triad composed of a surface wave and two oblique subharmonic internal waves. Wave damping due to weak viscosity in both layers is considered. The Boussinesq equations and the analytical model are verified. In contrast to previous studies which focus on short internal waves, we examine long waves and investigate some previously unexplored characteristics of this class of triad interaction. In viscous fluids, surface wave amplitudes must be larger than a threshold to overcome viscous damping and trigger internal waves. The dependency of this critical amplitude as well as the growth and damping rates of internal waves on important parameters in a two-fluid system, namely the directional angle of the internal waves, depth, density, and viscosity ratio of the fluid layers, and surface wave amplitude and frequency is investigated.

Solar maximum mission panel jettison analysis remote manipulator system

NASA Technical Reports Server (NTRS)

Bauer, R. B.

1980-01-01

A study is presented of the development of the Remote Manipulator System (RMS) configurations for jettison of the solar panels on the Solar Maximum Mission/Multimission Satellite. A valid RMS maneuver between jettison configurations was developed. Arm and longeron loads and effector excursions due to the solar panel jettison were determined to see if they were within acceptable limits. These loads and end effector excursions were analyzed under two RMS modes, servos active in position hold submode, and in the brakes on mode.

Probabilistic Polling And Voting In The 2008 Presidential Election: Evidence From The American Life Panel.

PubMed

Delavande, Adeline; Manski, Charles F

2010-01-01

This article reports new empirical evidence on probabilistic polling , which asks persons to state in percent-chance terms the likelihood that they will vote and for whom. Before the 2008 presidential election, seven waves of probabilistic questions were administered biweekly to participants in the American Life Panel (ALP). Actual voting behavior was reported after the election. We find that responses to the verbal and probabilistic questions are well-aligned ordinally. Moreover, the probabilistic responses predict voting behavior beyond what is possible using verbal responses alone. The probabilistic responses have more predictive power in early August, and the verbal responses have more power in late October. However, throughout the sample period, one can predict voting behavior better using both types of responses than either one alone. Studying the longitudinal pattern of responses, we segment respondents into those who are consistently pro-Obama , consistently anti-Obama , and undecided/vacillators . Membership in the consistently pro- or anti-Obama group is an almost perfect predictor of actual voting behavior, while the undecided/vacillators group has more nuanced voting behavior. We find that treating the ALP as a panel improves predictive power: current and previous polling responses together provide more predictive power than do current responses alone.

Translocalisation over the Net: Digitalisation, Information Technology and Local Cultures in Melanesia

ERIC Educational Resources Information Center

Kupiainen, Jari

2006-01-01

In the Western Pacific, the People First Network project has since 2001 been building a growing network of rural email stations across the conflict-ridden Solomon Islands. These stations are based on robust technology and consist of solar panels, short-wave radios and compatible modems, laptop computers and printers to provide email communication…

Education and Earnings: Empirical Findings from Alternative Operationalizations.

ERIC Educational Resources Information Center

Kominski, Robert

Data from the third-wave interview of the 1984 panel of the Survey of Income and Program Participation (SIPP) are used to assess the empirical impact of a SIPP item concerning educational attainment on the regression of earnings on educational attainment. The SIPP is a longitudinal survey conducted by the United States Census Bureau to measure…

Measuring the Returns to Lifelong Learning. CEE DP 110

ERIC Educational Resources Information Center

Blanden, Jo; Buscha, Franz; Sturgis, Patrick; Urwin, Peter

2010-01-01

Using the 1991 to 2007 waves of the UK British Household Panel Survey (BHPS), the authors estimate a fixed effects specification that has as outcomes (i) earnings and (ii) an indicator of social position measured using the CAMSIS scale. Adopting a fixed effects specification enables them to isolate the role of lifelong learning on these two…

Research Performed within the Non-Destructive Evaluation Team at NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Burns, Erin A.

2004-01-01

Non-destructive testing is essential in many fields of manufacturing and research in order to perform reliable examination of potentially damaged materials and parts without destroying the inherent structure of the materials. Thus, the Non-Destructive Evaluation (NDE) Team at NASA Glenn Research Center partakes in various projects to improve materials testing equipment as well as analyze materials, material defects, and material deficiencies. Due to the array of projects within the NDE Team at this time, five research aims were supplemental to some current projects. A literature survey of "DE and testing methodologies as related to rocks was performed. Also, Mars Expedition Rover technology was assessed to understand the requirements for instrumentation in harsh space environments (e.g. temperature). Potential instrumentation and technologies were also considered and documented. The literature survey provided background and potential sources for a proposal to acquire funding for ultrasonic instrumentation on board a future Mars expedition. The laboratory uses a Santec Systems AcousticScope AS200 acoustography system. Labview code was written within the current program in order to improve the current performance of the acoustography system. A sample of Reinforced Carbon/Carbon (RCC) material from the leading edge of the space shuttle underwent various non-destructive tests (guided wave scanning, thermography, computed tomography, real time x-ray, etc.) in order to characterize its structure and examine possible defects. Guided wave scan data of a ceramic matrix composite (CMC) panel was reanalyzed utilizing image correlations and signal processing variables. Additional guided wave scans and thermography were also performed on the CMC panel. These reevaluated data and images will be used in future presentations and publications. An additional axis for the guided wave scanner was designed, constructed, and implemented. This additional axis allowed incremental spacing of the previously fixed transducers for ultrasonic velocity measurements.

Impact of social capital on depression trajectories of older women in Korea.

PubMed

Park, Mi-Jin

2017-04-01

This study examines the impact of social capital on depressive symptoms trajectories among Korean women aged 65 years or older. It also examines the difference in depressive symptoms and social capital by economic status (poverty group, non-poverty group) among community-dwelling older women in Korea. This study used 2435 older women of the Korean Welfare Panel Study from 2006 (wave 1) to 2013 (wave 8) data using latent growth modeling. Social capital variables were cognitive (interpersonal trust, reciprocity) and structural (the size of family, the number of friends or neighbors, participation in leisure and volunteer activities). The results showed both intra- and inter-individual variability in depressive symptoms over time. Interpersonal trust and reciprocity as cognitive social capital had an effect on the change of depressive symptoms in intercept and slope. The size of family, participation in leisure activities among structural social capital were associated with lower levels of depressive symptoms in intercept and slope. The results of this study suggest some practical implications for depression intervention and prevention and further research on late-life depression.

The Dynamic Interplay among Maternal Empathy, Quality of Mother-Adolescent Relationship, and Adolescent Antisocial Behaviors: New Insights from a Six-Wave Longitudinal Multi-Informant Study

PubMed Central

Crocetti, Elisabetta; Moscatelli, Silvia; Van der Graaff, Jolien; Keijsers, Loes; van Lier, Pol; Koot, Hans M.; Rubini, Monica; Meeus, Wim; Branje, Susan

2016-01-01

Adolescents’ behavior is often a matter of concern, given their increased likelihood of enacting antisocial behaviors, which cause disruptions in the social order and are potentially harmful for the adolescents themselves and for the people around them. In this six-wave longitudinal study we sought to examine the interplay among maternal empathy, multiple indicators of mother-adolescent relationship quality (i.e., balanced relatedness, conflict, and support), and adolescent antisocial behaviors rated both by adolescents and their mothers. Participants for the current study were 497 Dutch adolescents (56.9% males) followed from age 13 to 18, and their mothers. A series of cross-lagged panel models revealed reciprocal associations between maternal empathy and mother-adolescent relationship quality and between mother-adolescent relationship quality and adolescent antisocial behaviors. Interestingly, we also found some indirect effects of adolescent antisocial behaviors on maternal empathy mediated by mother-adolescent relationship quality. Overall, this study further highlights a process of reciprocal influences within mother-adolescent dyads. PMID:26990191

Foam composite structures. [for fire retardant airframe materials

NASA Technical Reports Server (NTRS)

Delano, C. B.; Milligan, R. J.

1976-01-01

The need to include fire resistant foams into state of the art aircraft interior paneling to increase passenger safety in aircraft fires was studied. Present efforts were directed toward mechanical and fire testing of panels with foam inclusions. Skinned foam filled honeycomb and PBI structural foams were the two constructions investigated with attention being directed toward weight/performance/cost trade-off. All of the new panels demonstrated improved performance in fire and some were lighter weight but not as strong as the presently used paneling. Continued efforts should result in improved paneling for passenger safety. In particular the simple partial filling (fire side) of state-of-the-art honeycomb with fire resistant foams with little sacrifice in weight would result in panels with increased fire resistance. More important may be the retarded rate of toxic gas evolution in the fire due to the protection of the honeycomb by the foam.

Tilted membrane panel: A new module concept to maximize the impact of air bubbles for membrane fouling control in microalgae harvesting.

PubMed

Eliseus, A; Bilad, M R; Nordin, N A H M; Putra, Z A; Wirzal, M D H

2017-10-01

Microalgae harvesting using membrane technology is challenging because of its high fouling propensity. As an established fouling mitigation technique, efficacy of air bubbles can be improved by maximizing the impact of shear-rates in scouring foulant. In this study, it is achieved by tilting the membrane panel. We investigate the effect of tilting angle, switching period as well as aeration rate during microalgal broth filtration. Results show that higher tilting angles (up to 20°) improve permeability of up to 2.7 times of the vertical panel. In addition, operating a one-sided panel is better than a two-sided panel, in which the later involved switching mode. One-sided membrane panel only require a half of area, yet its performance is comparable with of a large-scale module. This tilted panel can lead to significant membrane cost reductions and eventually improves the competitiveness of membrane technology for microalgae harvesting application. Copyright © 2017 Elsevier Ltd. All rights reserved.

Description of Panel Method Code ANTARES

NASA Technical Reports Server (NTRS)

Ulbrich, Norbert; George, Mike (Technical Monitor)

2000-01-01

Panel method code ANTARES was developed to compute wall interference corrections in a rectangular wind tunnel. The code uses point doublets to represent blockage effects and line doublets to represent lifting effects of a wind tunnel model. Subsonic compressibility effects are modeled by applying the Prandtl-Glauert transformation. The closed wall, open jet, or perforated wall boundary condition may be assigned to a wall panel centroid. The tunnel walls can be represented by using up to 8000 panels. The accuracy of panel method code ANTARES was successfully investigated by comparing solutions for the closed wall and open jet boundary condition with corresponding Method of Images solutions. Fourier transform solutions of a two-dimensional wind tunnel flow field were used to check the application of the perforated wall boundary condition. Studies showed that the accuracy of panel method code ANTARES can be improved by increasing the total number of wall panels in the circumferential direction. It was also shown that the accuracy decreases with increasing free-stream Mach number of the wind tunnel flow field.

Application of wavefield imaging to characterize scattering from artificial and impact damage in composite laminate panels

NASA Astrophysics Data System (ADS)

Williams, Westin B.; Michaels, Thomas E.; Michaels, Jennifer E.

2018-04-01

Composite materials used for aerospace applications are highly susceptible to impacts, which can result in barely visible delaminations. Reliable and fast detection of such damage is needed before structural failures occur. One approach is to use ultrasonic guided waves generated from a sparse array consisting of permanently mounted or embedded transducers for performing structural health monitoring. This array can detect introduction of damage after baseline subtraction, and also provide localization and characterization information via the minimum variance imaging algorithm. Imaging performance can vary considerably depending upon where damage is located with respect to the array; however, prior work has shown that knowledge of expected scattering can improve imaging consistency for artificial damage at various locations. In this study, anisotropic material attenuation and wave speed are estimated as a function of propagation angle using wavefield data recorded along radial lines at multiple angles with respect to an omnidirectional guided wave source. Additionally, full wavefield data are recorded before and after the introduction of artificial and impact damage so that wavefield baseline subtraction may be applied. 3-D filtering techniques are then used to reduce noise and isolate scattered waves. A model for estimating scattering of a circular defect is developed and scattering estimates for both artificial and impact damage are presented and compared.

Variable-intercept panel model for deformation zoning of a super-high arch dam.

PubMed

Shi, Zhongwen; Gu, Chongshi; Qin, Dong

2016-01-01

This study determines dam deformation similarity indexes based on an analysis of deformation zoning features and panel data clustering theory, with comprehensive consideration to the actual deformation law of super-high arch dams and the spatial-temporal features of dam deformation. Measurement methods of these indexes are studied. Based on the established deformation similarity criteria, the principle used to determine the number of dam deformation zones is constructed through entropy weight method. This study proposes the deformation zoning method for super-high arch dams and the implementation steps, analyzes the effect of special influencing factors of different dam zones on the deformation, introduces dummy variables that represent the special effect of dam deformation, and establishes a variable-intercept panel model for deformation zoning of super-high arch dams. Based on different patterns of the special effect in the variable-intercept panel model, two panel analysis models were established to monitor fixed and random effects of dam deformation. Hausman test method of model selection and model effectiveness assessment method are discussed. Finally, the effectiveness of established models is verified through a case study.

Regression Analysis of Mixed Panel Count Data with Dependent Terminal Events

PubMed Central

Yu, Guanglei; Zhu, Liang; Li, Yang; Sun, Jianguo; Robison, Leslie L.

2017-01-01

Event history studies are commonly conducted in many fields and a great deal of literature has been established for the analysis of the two types of data commonly arising from these studies: recurrent event data and panel count data. The former arises if all study subjects are followed continuously, while the latter means that each study subject is observed only at discrete time points. In reality, a third type of data, a mixture of the two types of the data above, may occur and furthermore, as with the first two types of the data, there may exist a dependent terminal event, which may preclude the occurrences of recurrent events of interest. This paper discusses regression analysis of mixed recurrent event and panel count data in the presence of a terminal event and an estimating equation-based approach is proposed for estimation of regression parameters of interest. In addition, the asymptotic properties of the proposed estimator are established and a simulation study conducted to assess the finite-sample performance of the proposed method suggests that it works well in practical situations. Finally the methodology is applied to a childhood cancer study that motivated this study. PMID:28098397

Density waves at the interface of a binary complex plasma

NASA Astrophysics Data System (ADS)

Yang, Li; Schwabe, Mierk; Zhdanov, Sergey; Thomas, Hubertus M.; Lipaev, Andrey M.; Molotkov, Vladimir I.; Fortov, Vladimir E.; Zhang, Jing; Du, Cheng-Ran

2017-01-01

Density waves were studied in a phase-separated binary complex plasma under microgravity conditions. For the big particles, waves were self-excited by the two-stream instability, while for small particles, they were excited by heartbeat instability with the presence of reversed propagating pulses of a different frequency. By studying the dynamics of wave crests at the interface, we recognize a “collision zone” and a “merger zone” before and after the interface, respectively. The results provide a generic picture of wave-wave interaction at the interface between two “mediums”.

Dent and Flint maize diversity panels reveal important genetic potential for increasing biomass production.

PubMed

Rincent, R; Nicolas, S; Bouchet, S; Altmann, T; Brunel, D; Revilla, P; Malvar, R A; Moreno-Gonzalez, J; Campo, L; Melchinger, A E; Schipprack, W; Bauer, E; Schoen, C-C; Meyer, N; Ouzunova, M; Dubreuil, P; Giauffret, C; Madur, D; Combes, V; Dumas, F; Bauland, C; Jamin, P; Laborde, J; Flament, P; Moreau, L; Charcosset, A

2014-11-01

Genetic and phenotypic analysis of two complementary maize panels revealed an important variation for biomass yield. Flowering and biomass QTL were discovered by association mapping in both panels. The high whole plant biomass productivity of maize makes it a potential source of energy in animal feeding and biofuel production. The variability and the genetic determinism of traits related to biomass are poorly known. We analyzed two highly diverse panels of Dent and Flint lines representing complementary heterotic groups for Northern Europe. They were genotyped with the 50 k SNP-array and phenotyped as hybrids (crossed to a tester of the complementary pool) in a western European field trial network for traits related to flowering time, plant height, and biomass. The molecular information revealed to be a powerful tool for discovering different levels of structure and relatedness in both panels. This study revealed important variation and potential genetic progress for biomass production, even at constant precocity. Association mapping was run by combining genotypes and phenotypes in a mixed model with a random polygenic effect. This permitted the detection of significant associations, confirming height and flowering time quantitative trait loci (QTL) found in literature. Biomass yield QTL were detected in both panels but were unstable across the environments. Alternative kinship estimator only based on markers unlinked to the tested SNP increased the number of significant associations by around 40% with a satisfying control of the false positive rate. This study gave insights into the variability and the genetic architectures of biomass-related traits in Flint and Dent lines and suggests important potential of these two pools for breeding high biomass yielding hybrid varieties.

The Short-Term Longitudinal and Reciprocal Relations Between Peer Victimization on Facebook and Adolescents' Well-Being.

PubMed

Frison, Eline; Subrahmanyam, Kaveri; Eggermont, Steven

2016-09-01

Although studies have shown that depressive symptoms, life satisfaction, and adolescents' online peer victimization are associated, there remain critical gaps in our understanding of these relationships. To address these gaps, the present two-wave panel study (N Time1 = 1840) (1) examines the short-term longitudinal and reciprocal relationships between peer victimization on Facebook, depressive symptoms and life satisfaction during adolescence, and (2) explores the moderating role of adolescents' gender, age, and perceived friend support. Self-report data from 1621 adolescent Facebook users (48 % girls; M Age  = 14.76; SD = 1.41) were used to test our hypotheses. The majority of the sample (92 %) was born in Belgium. Cross-lagged analyses indicated that peer victimization on Facebook marginally predicted decreases in life satisfaction, and life satisfaction predicted decreases in peer victimization on Facebook. However, depressive symptoms were a risk factor for peer victimization on Facebook, rather than an outcome. In addition, support from friends protected adolescents from the harmful outcomes of peer victimization on Facebook. Both theoretical and practical implications are discussed.

Sexy online self-presentation on social network sites and the willingness to engage in sexting: A comparison of gender and age.

PubMed

van Oosten, Johanna M F; Vandenbosch, Laura

2017-01-01

The present study investigated whether engaging in sexy self-presentations on social network sites (SNSs) or exposure to sexy self-presentations on SNSs predicts the willingness to engage in sexting. A second aim of the present study was to investigate whether adolescent girls demonstrate stronger relationships between (exposure to) sexy online self-presentations on SNSs and willingness to sext than adolescent boys and young adult men and women. A two-wave panel survey among 953 Dutch adolescents (13-17 years old, 50.7% male) and 899 Dutch young adults (18-25 years old, 43.9% male) showed that engaging in sexy self-presentations on SNSs increased the willingness to engage in sexting, but only among adolescent girls. Exposure to sexy self-presentations of others did not predict the willingness to engage in sexting. The findings call for more research on the role of gender and age in the link between sexy self-presentation and sexting. Copyright © 2016 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

Nonlinear evolution of energetic-particles-driven waves in collisionless plasmas

NASA Astrophysics Data System (ADS)

Li, Shuhan; Liu, Jinyuan; Wang, Feng; Shen, Wei; Li, Dong

2018-06-01

A one-dimensional electrostatic collisionless particle-in-cell code has been developed to study the nonlinear interaction between electrostatic waves and energetic particles (EPs). For a single wave, the results are clear and agree well with the existing theories. For coexisting two waves, although the mode nonlinear coupling between two wave fields is ignored, the second-order phase space islands can still exist between first-order islands generated by the two waves. However, the second-order phase islands are not formed by the superposed wave fields and the perturbed motions of EPs induced by the combined effect of two main resonances make these structures in phase space. Owing to these second-order islands, energy can be transferred between waves, even if the overlap of two main resonances never occurs. Depending on the distance between the main resonance islands in velocity space, the second-order island can affect the nonlinear dynamics and saturations of waves.

Numerical and experimental study of Lamb wave propagation in a two-dimensional acoustic black hole

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yan, Shiling; Shen, Zhonghua, E-mail: shenzh@njust.edu.cn; Lomonosov, Alexey M.

2016-06-07

The propagation of laser-generated Lamb waves in a two-dimensional acoustic black-hole structure was studied numerically and experimentally. The geometrical acoustic theory has been applied to calculate the beam trajectories in the region of the acoustic black hole. The finite element method was also used to study the time evolution of propagating waves. An optical system based on the laser-Doppler vibration method was assembled. The effect of the focusing wave and the reduction in wave speed of the acoustic black hole has been validated.

Comparative analysis of heat dissipation panels for a hybrid cooling system integrated in buildings

NASA Astrophysics Data System (ADS)

Zuazua-Ros, A.; Ramos, JC; Martín-Gómez, C.; Gómez-Acebo, Tomás; Pisano, A.

2018-05-01

The use of cooling panels as heat dissipation elements integrated in buildings has been previously investigated by the authors. Those elements would be connected to the condenser and would dissipate the heat in a passive form. Following the research, this study analyses and compares the thermal performance of two heat dissipation panels as part of a hybrid cooling system. Both panels were experimentally tested under different variables, thus having nine scenarios for each panel. Additionally, an already validated model was applied. The empirical results show a considerable difference between the cooling capacity among them, doubling the daily average ratio in one scenario. The heat dissipation ratios vary between 106 and 227 W/m2 in the first case and 140 and 413 W/m2 in the second. Regarding the model applicability, the average error for each panel was 4.0% and 8.5%. The bond between the metal sheet and the pipes of the panels has proven to be the main parameter to assure the highest heat dissipation potential of each panel.

Space Shuttle Orbiter Wing-Leading-Edge Panel Thermo-Mechanical Analysis for Entry Conditions

NASA Technical Reports Server (NTRS)

Knight, Norman F., Jr.; Song, Kyongchan; Raju, Ivatury S.

2010-01-01

Linear elastic, thermo-mechanical stress analyses of the Space Shuttle Orbiter wing-leading-edge panels is presented for entry heating conditions. The wing-leading-edge panels are made from reinforced carbon-carbon and serve as a part of the overall thermal protection system. Three-dimensional finite element models are described for three configurations: integrated configuration, an independent single-panel configuration, and a local lower-apex joggle segment. Entry temperature conditions are imposed and the through-the-thickness response is examined. From the integrated model, it was concluded that individual panels can be analyzed independently since minimal interaction between adjacent components occurred. From the independent single-panel model, it was concluded that increased through-the-thickness stress levels developed all along the chord of a panel s slip-side joggle region, and hence isolated local joggle sections will exhibit the same trend. From the local joggle models, it was concluded that two-dimensional plane-strain models can be used to study the influence of subsurface defects along the slip-side joggle region of these panels.

Development of an Interdisciplinary STEM Classroom Activity for Radio Receiver Technology

NASA Astrophysics Data System (ADS)

Davis, Kristina

2015-01-01

Introduction The development of a mini STEM-based classroom activity designed to integrate these two fields into one project for middle school aged students is presented here. This lesson involves small groups of students constructing a small AM radio receivers. The lesson surrounding the activity focuses on both the physical nature of electromagnetic and AC waves, circuit design, practical applications to AM radio broadcasting, and research applications of radio telescopes. These tools have shown a significant increase in the lesson's primary concept understanding among 6th grade students, as well as net positive STEM awareness and enthusiasm.Content The primary teaching point for the students to consider and learn during this lesson is 'How does scientific application influence engineering design, and vice versa?' The lesson surrounds the hands-on activity of having students construct their own AM radio receiver. Wave theory and the use of radio instruments for astronomy research are also taught in a traditional lecture format. The activity is designed to complement middle school curriculum, although it has been tested and found suitable for high school and older students as well as the general public.Evaluation and ImpactThe evaluation tool that used for the student groups in this project was a Fryer chart, which is a four panel chart with the main topic listed in the center and a single question in each of the four panels. The students are asked to answer the questions in the chart before and after they participate in the lesson activity, each time in a different colored pencil so that the scores can be given to each student before and after they participated in the activity. Student scores improved from 4.5 to 17.9 out of a total of 20 possible points. This is an overall increase of 67% of the total possible points. The questions asked on the quiz cover the range of wave theory, circuit design, and scientific explanation. This factor of improvement shows that the lesson designed for this fellowship project is effective at teaching students about each of those concepts with a single teaching activity.

Flexible radiator thermal vacuum test report

NASA Technical Reports Server (NTRS)

Oren, J. A.; Hixon, C. W.

1982-01-01

Two flexible, deployable/retraction radiators were designed and fabricated. The two radiator panels are distinguishable by their mission life design. One panel is designed with a 90 percent probability of withstanding the micrometeoroid environment of a low earth orbit for 30 days. This panel is designated the soft tube radiator after the PFA Teflon tubes which distribute the transport fluid over the panel. The second panel is designed with armored flow tubes to withstand the same micrometeoroid environment for 5 years. It is designated the hard tube radiator after its stainless steel flow tubes. The thermal performance of the radiators was tested under anticipated environmental conditions. The two deployment systems of the radiators were evaluated in a thermal vacuum environment.

Easy Attachment Of Panels To A Truss

NASA Technical Reports Server (NTRS)

Thomson, Mark; Gralewski, Mark

1992-01-01

Conceptual antenna dish, solar collector, or similar structure consists of hexagonal panels supported by truss erected in field. Truss built in increments to maintain access to panel-attachment nodes. Each panel brought toward truss at angle and attached to two nodes. Panel rotated into attachment at third node.

Using guided ultrasonic wave inspection to quantify the length of delaminations in composite laminates

NASA Astrophysics Data System (ADS)

Feng, Bo; Ribeiro, Artur Lopes; Ramos, Helena Geirinhas

2018-04-01

This paper presents a study of the characteristics of Lamb wave (S0 mode) testing signals in carbon fiber composite laminates containing delaminations. The study was implemented by using commercial finite element simulation software - ANSYS. The delamination signal is proven to be the superposition of the two waves travelling from upper and lower sub-laminates. Dispersion curves for the two sub-laminates were calculated to show the difference between phase velocities of the waves in the sub-laminates. Two models are specifically designed to get the phase difference between the waves that travel in each of the two sub-laminates. From the simulation results, it was found that the phase difference increases with the delamination length. Furthermore, the amplitude of delamination signal decreases first, then it starts to increase after reaching the minimum value. The minimum is reached when the waves from the two sub-laminates are 180° out of phase.

Buckling Testing and Analysis of Honeycomb Sandwich Panel Arc Segments of a Full-Scale Fairing Barrel: Comparison of In- and Out-of-Autoclave Facesheet Configurations

NASA Technical Reports Server (NTRS)

Pineda, Evan Jorge; Myers, David E.; Kosareo, Daniel N.; Zalewski, Bart F.; Kellas, Sotiris; Dixon, Genevieve D.; Krivanek, Thomas M.; Gyekenyesi, Thomas G.

2014-01-01

Four honeycomb sandwich panels, representing 1/16th arc segments of a 10-m diameter barrel section of the Heavy Lift Launch Vehicle, were manufactured and tested under the NASA Composites for Exploration and the NASA Constellation Ares V programs. Two configurations were chosen for the panels: 6-ply facesheets with 1.125 in. honeycomb core and 8-ply facesheets with 1.0 in. honeycomb core. Additionally, two separate carbon fiber/epoxy material systems were chosen for the facesheets: in-autoclave IM7/977-3 and out-of-autoclave T40-800b/5320-1. Smaller 3 ft. by 5 ft. panels were cut from the 1/16th barrel sections and tested under compressive loading. Furthermore, linear eigenvalue and geometrically nonlinear finite element analyses were performed to predict the compressive response of each 3 ft. by 5 ft. panel. To improve the robustness of the geometrically nonlinear finite element model, measured surface imperfections were included in the geometry of the model. Both the linear and nonlinear models yielded good qualitative and quantitative predictions. Additionally, it was correctly predicted that the panel would fail in buckling prior to failing in strength. Furthermore, several imperfection studies were performed to investigate the influence of geometric imperfections, fiber angle misalignments, and three-dimensional effects on the compressive response of the panel.

The Structure and Stability of Political Attitudes: Findings from the 1974-1976 Dearborn Panel Study.

ERIC Educational Resources Information Center

Wayman, Frank Whelon; Stockton, Ronald R.

Based on a panel study of 800 voters in Dearborn, Michigan, this report examines the impact of political attitudes on the party system and on the presidential elections of 1972 and 1976. The central thesis is that public opinion can be classified into two clusters of attitudes, one which disrupts and the other which reinforces partisan voting. The…

A numerical and experimental study on the nonlinear evolution of long-crested irregular waves

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goullet, Arnaud; Choi, Wooyoung; Division of Ocean Systems Engineering, Korea Advanced Institute of Science and Technology, Daejeon 305-701

2011-01-15

The spatial evolution of nonlinear long-crested irregular waves characterized by the JONSWAP spectrum is studied numerically using a nonlinear wave model based on a pseudospectral (PS) method and the modified nonlinear Schroedinger (MNLS) equation. In addition, new laboratory experiments with two different spectral bandwidths are carried out and a number of wave probe measurements are made to validate these two wave models. Strongly nonlinear wave groups are observed experimentally and their propagation and interaction are studied in detail. For the comparison with experimental measurements, the two models need to be initialized with care and the initialization procedures are described. Themore » MNLS equation is found to approximate reasonably well for the wave fields with a relatively smaller Benjamin-Feir index, but the phase error increases as the propagation distance increases. The PS model with different orders of nonlinear approximation is solved numerically, and it is shown that the fifth-order model agrees well with our measurements prior to wave breaking for both spectral bandwidths.« less

Effects of reduced panel, reference origin, and genetic relationship on imputation of genotypes in Hereford cattle

USDA-ARS?s Scientific Manuscript database

The objective of this study was to investigate alternative methods for designing and utilizing reduced single nucleotide polymorphism (SNP) panels for imputing SNP genotypes. Two purebred Hereford populations, an experimental population known as Line 1 Hereford (L1, N=240) and registered Hereford wi...

Imputation of single nucleotide polymorhpism genotypes of Hereford cattle: reference panel size, family relationship and population structure

USDA-ARS?s Scientific Manuscript database

The objective of this study is to investigate single nucleotide polymorphism (SNP) genotypes imputation of Hereford cattle. Purebred Herefords were from two sources, Line 1 Hereford (N=240) and representatives of Industry Herefords (N=311). Using different reference panels of 62 and 494 males with 1...

Effects of full-facility variable tolling on traveler behavior : evidence from a panel study of the SR-520 corridor in Seattle.

DOT National Transportation Integrated Search

2014-10-01

This paper uses a two-stage panel survey approach, with roughly 2,000 respondent households, to analyze the impacts of a federally sponsored variable tolling program on SR-520 in the Seattle region. The focus is on corridor users daily travel choi...

Aerothermoelastic Topology Optimization with Flutter and Buckling Metrics (Postprint)

DTIC Science & Technology

2013-07-01

topologies of an unheated panel, thermal buckling-optimal topologies, and flutter- optimality of a heated panel (where the latter case presents a...topological compromise between the former two). The effect of various constraint boundaries, temperature gradients, and (for the flutter of the heated panel...optimality of a heated panel (where the latter case presents a topological compromise between the former two). The effect of various constraint boundaries

Experimental study of three-wave interactions among capillary-gravity surface waves

NASA Astrophysics Data System (ADS)

Haudin, Florence; Cazaubiel, Annette; Deike, Luc; Jamin, Timothée; Falcon, Eric; Berhanu, Michael

2016-04-01

In propagating wave systems, three- or four-wave resonant interactions constitute a classical nonlinear mechanism exchanging energy between the different scales. Here we investigate three-wave interactions for gravity-capillary surface waves in a closed laboratory tank. We generate two crossing wave trains and we study their interaction. Using two optical methods, a local one (laser doppler vibrometry) and a spatiotemporal one (diffusive light photography), a third wave of smaller amplitude is detected, verifying the three-wave resonance conditions in frequency and in wave number. Furthermore, by focusing on the stationary regime and by taking into account viscous dissipation, we directly estimate the growth rate of the resonant mode. The latter is then compared to the predictions of the weakly nonlinear triadic resonance interaction theory. The obtained results confirm qualitatively and extend previous experimental results obtained only for collinear wave trains. Finally, we discuss the relevance of three-wave interaction mechanisms in recent experiments studying gravity-capillary turbulence.

Experimental study of three-wave interactions among capillary-gravity surface waves.

PubMed

Haudin, Florence; Cazaubiel, Annette; Deike, Luc; Jamin, Timothée; Falcon, Eric; Berhanu, Michael

2016-04-01

In propagating wave systems, three- or four-wave resonant interactions constitute a classical nonlinear mechanism exchanging energy between the different scales. Here we investigate three-wave interactions for gravity-capillary surface waves in a closed laboratory tank. We generate two crossing wave trains and we study their interaction. Using two optical methods, a local one (laser doppler vibrometry) and a spatiotemporal one (diffusive light photography), a third wave of smaller amplitude is detected, verifying the three-wave resonance conditions in frequency and in wave number. Furthermore, by focusing on the stationary regime and by taking into account viscous dissipation, we directly estimate the growth rate of the resonant mode. The latter is then compared to the predictions of the weakly nonlinear triadic resonance interaction theory. The obtained results confirm qualitatively and extend previous experimental results obtained only for collinear wave trains. Finally, we discuss the relevance of three-wave interaction mechanisms in recent experiments studying gravity-capillary turbulence.

Extravehicular activity compatibility evaluation of developmental hardware for assembly and repair of precision reflectors

NASA Technical Reports Server (NTRS)

Heard, Walter L., Jr.; Lake, Mark S.; Bush, Harold G.; Jensen, J. Kermit; Phelps, James E.; Wallsom, Richard E.

1992-01-01

This report presents results of tests performed in neutral buoyancy by two pressure-suited test subjects to simulate Extravehicular Activity (EVA) tasks associated with the on-orbit construction and repair of a precision reflector spacecraft. Two complete neutral buoyancy assemblies of the test article (tetrahedral truss with three attached reflector panels) were performed. Truss joint hardware, two different panel attachment hardware concepts, and a panel replacement tool were evaluated. The test subjects found the operation and size of the truss joint hardware to be acceptable. Both panel attachment concepts were found to be EVA compatible, although one concept was judged by the test subjects to be considerably easier to operate. The average time to install a panel from a position within arm's reach of the test subjects was 1 min 14 sec. The panel replacement tool was used successfully to demonstrate the removal and replacement of a damaged reflector panel in 10 min 25 sec.

Validity of the growth model of the 'computerized visual perception assessment tool for Chinese characters structures'.

PubMed

Wu, Huey-Min; Li, Cheng-Hsaun; Kuo, Bor-Chen; Yang, Yu-Mao; Lin, Chin-Kai; Wan, Wei-Hsiang

2017-08-01

Morphological awareness is the foundation for the important developmental skills involved with vocabulary, as well as understanding the meaning of words, orthographic knowledge, reading, and writing. Visual perception of space and radicals in two-dimensional positions of Chinese characters' morphology is very important in identifying Chinese characters. The important predictive variables of special and visual perception in Chinese characters identification were investigated in the growth model in this research. The assessment tool is the "Computerized Visual Perception Assessment Tool for Chinese Characters Structures" developed by this study. There are two constructs, basic stroke and character structure. In the basic stroke, there are three subtests of one, two, and more than three strokes. In the character structure, there are three subtests of single-component character, horizontal-compound character, and vertical-compound character. This study used purposive sampling. In the first year, 551 children 4-6 years old participated in the study and were monitored for one year. In the second year, 388 children remained in the study and the successful follow-up rate was 70.4%. This study used a two-wave cross-lagged panel design to validate the growth model of the basic stroke and the character structure. There was significant correlation of the basic stroke and the character structure at different time points. The abilities in the basic stroke and in the character structure steadily developed over time for preschool children. Children's knowledge of the basic stroke effectively predicted their knowledge of the basic stroke and the character structure. Copyright © 2017 Elsevier Ltd. All rights reserved.

12. Credit JTL: Detail view, two panels at north end ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. Credit JTL: Detail view, two panels at north end of western truss from bridge deck, showing end panel details; cast iron end post is missing - Reading-Halls Station Bridge, U.S. Route 220, spanning railroad near Halls Station, Muncy, Lycoming County, PA

Free-edge effects in a cylindrical sandwich panel with a flexible core and laminated composite face sheets

NASA Astrophysics Data System (ADS)

Afshin, M.; Sadighi, M.; Shakeri, M.

2010-12-01

In the present study, the static response of cylindrical sandwich panels with a flexible core is investigated. The face sheets are considered as composite laminates with a cross-ply lay-up and the core as a flexible elastic medium. The flexibility of the low-strength core leads to high stress concentrations in terms of peeling stresses between the face sheets and the core at edges of the sandwich panel. To take into account the compressibility of the core and to determine the free-edge stresses of sandwich structures accurately, the Reddy layerwise theory (LWT) is used in this paper. The paper outlines the mathematical formulation, along with a numerical study, of a cylindrical sandwich panel with two simply supported and two free edges under a transverse load. The formulation includes the derivation of field equations along with boundary conditions. A Levy-type solution procedure is performed to determine the distributions of stresses and strains. In the numerical study, first a comparison is made with results from the commercial finite-element software ANSYS to verify the LWT results. Finally, a parametric study is conducted, and the effect caused by varying different parameters, such as the radii of curvature and the core to face sheet thickness ratio, on the results are investigated. The results obtained demonstrate a good agreement between LWT and FEM solutions and show increasing interlaminar stresses in the free edge of the sandwich panel

The elimination of healthcare user fees for children under five substantially alleviates the burden on household expenses in Burkina Faso.

PubMed

Abdou Illou, Mahaman Mourtala; Haddad, Slim; Agier, Isabelle; Ridde, Valéry

2015-08-08

Since September 2008, an intervention has made it possible to provide free care to children under five in public health facilities in two districts of Burkina Faso. This study evaluated the intervention's impact on household expenses incurred for services (consultations and medications) to the children targeted. The study is based on a survey of a representative panel of 1,260 households encountered in two waves, one month before and 12 months after the introduction of the intervention. The questions explored the illness episodes of all children under five in the 30 days before each wave. The analysis of health expenses incurred during an illness episode distinguished between total expenses and those incurred in public health facilities (charges for services and medications). Analyses based on multilevel simultaneous equation models were used to estimate the probability of spending and the amount spent, in a context where a large number of observations returned a count of zero. The burden on household expenses was greatly alleviated under the intervention. Average expenditure dropped from US$11 per episode of care to less than US$2 after the intervention was implemented. The risk of incurring an expense at a public health facility was reduced by two-thirds. The facility users' savings were primarily related to medication purchases. In rural areas, where barriers to access health services are more acute, both poor and non-poor families benefited from the intervention. The probability of spending on medications dropped dramatically for both the poor and the non-poor under the exemption (-75% vs.-77%), and the reduction in expenses for medications generated by the intervention was comparable for both groups in relative values (-86% vs.-89%). User fees abolition at the point of service substantially alleviated the burden on household expenses. The intervention benefited both poor and non-poor families and provided financial protection.

Labor-Force Dynamics at Older Ages

PubMed Central

Zissimopoulos, Julie M.; Karoly, Lynn A.

2012-01-01

Labor-market transitions toward the latter parts of workers’ careers can be complex, with movement between jobs and classes of work and in and out of retirement. The authors analyzed factors associated with the labor-market transitions of older workers to self-employment from unemployment or disability, retirement, or wage and salary work using rich panel data from seven waves of the Health and Retirement Study (HRS). They found evidence that (prior) job characteristics and liquidity constraints are important predictors of movements to self-employment for workers and nonworkers, while risk aversion is a significant predictor only for workers. PMID:23049149

CubeSat Form Factor Thermal Control Louvers

NASA Technical Reports Server (NTRS)

Evans, Allison L. (Inventor)

2018-01-01

Thermal control louvers for CubeSats or small spacecraft may include a plurality of springs attached to a back panel of the thermal control louvers. The thermal control louvers may also include a front panel, which includes at least two end panels interlocked with one or more middle panels. The front panel may secure the springs, shafts, and flaps to the back panel.

Anticipating market demand: tracking enrollee satisfaction and health over time.

PubMed

Allen, H

1998-12-01

To assess guidelines, set by the National Committee for Quality Assurance, for the Health Plan Employer Data and Information Set (HEDIS) 1999 CAHPS 2.0H Survey (formerly the HEDIS 1999 Consumer Survey) in the light of user's needs to monitor health plan performance over time, monitor sick enrollees, and prioritize determinants (drivers) of enrollee experience. A two-wave, cross-sectional/longitudinal panel design, consisting of national surveys mailed to employees of three major USA corporations in 1993 and 1995. Samples included employees selected to represent 23 major managed care and indemnity plans in five regions of the USA. In 1993, 14 587 employees responded and in 1995 9018 employees responded (response rates: 51 and 52%). The longitudinal panel sample included 5729 employees who completed both surveys and stayed in the same plan for both years. STUDY MEASURES: The main 1993 and 1995 surveys consisted of 154 and 116 items, respectively. Panel survey content assessed care delivery, plan administration, functional status, well being, and chronic disease. CAHPS 2.0H's point-in-time, cross-sectional design was unable to detect selection bias and led to an inaccurate view of change in performance. CAHPS 2.0H's use of aggregate samples masked key differences between healthy and sick enrollees; e.g. the sick became less satisfied over time. The association-based, statistical techniques that many survey users will employ to prioritize the 'drivers' of enrollee experience in the absence of CAHPS 2.0H guidelines yielded a less efficient account of change than the multi-method/multi-trait approach developed for this project. Consumer experience of plan performance is best understood when the separate contributions of longitudinal membership and movement in and out of plans are clarified, changes in health are identified, changes for sick and healthy enrollees are compared, and plan performance on satisfaction criteria is probed to give confirmation and detail. Changes to the CAHPS 2.0H approach in HEDIS 1999 will facilitate user application of these principles.

Racial, Ethnic, and Nativity Differences in Mental Health Visits to Primary Care and Specialty Mental Health Providers: Analysis of the Medical Expenditures Panel Survey, 2010-2015.

PubMed

Jones, Audrey L; Cochran, Susan D; Leibowitz, Arleen; Wells, Kenneth B; Kominski, Gerald; Mays, Vickie M

2018-03-22

Black and Latino minorities have traditionally had poorer access to primary care than non-Latino Whites, but these patterns could change with the Affordable Care Act (ACA). To guide post-ACA efforts to address mental health service disparities, we used a nationally representative sample to characterize baseline race-, ethnicity-, and nativity-associated differences in mental health services in the context of primary care. Data were obtained from the Medical Expenditures Panel Survey (MEPS), a two-year panel study of healthcare use, satisfaction with care, and costs of services in the United States (US). We pooled data from six waves (14-19) of participants with serious psychological distress to examine racial, ethnic, and nativity disparities in medical and mental health visits to primary care (PC) and specialty mental health (SMH) providers around the time of ACA reforms, 2010-2015. Of the 2747 respondents with serious psychological distress, 1316 were non-Latino White, 632 non-Latino Black, 532 identified as Latino with Mexican, Central American, or South American (MCS) origins, and 267 as Latino with Caribbean island origins; 525 were foreign/island born. All racial/ethnic groups were less likely than non-Latino Whites to have any PC visit. Of those who used PC, non-Latino Blacks were less likely than Whites to have a PC mental health visit, while foreign born MCS Latinos were less likely to visit an SMH provider. Conditional on any mental health visit, Latinos from the Caribbean were more likely than non-Latino Whites to visit SMH providers versus PC providers only, while non-Latino Blacks and US born MCS Latinos received fewer PC mental health visits than non-Latino Whites. Racial-, ethnic-, and nativity-associated disparities persist in PC provided mental health services.

Interaction for solitary waves in coasting charged particle beams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Shi-Wei; Hong, Xue-Ren; Shi, Yu-Ren

2014-03-15

By using the extended Poincare-Lighthill-Kuo perturbation method, the collision of solitary waves in a coasting charged particle beams is studied. The results show that the system admits a solution with two solitary waves, which move in opposite directions and can be described by two Korteweg-deVries equation in small-amplitude limit. The collision of two solitary waves is elastic, and after the interaction they preserve their original properties. Then the weak phase shift in traveling direction of collision between two solitary waves is derived explicitly.

Estrus behavior, ovarian dynamics, and progesterone secretion in Criollo cattle during estrous cycles with two and three follicular waves.

PubMed

Quezada-Casasola, Andrés; Avendaño-Reyes, Leonel; Macías-Cruz, Ulises; Ramírez-Godínez, José Alejandro; Correa-Calderón, Abelardo

2014-04-01

In beef and dairy cattle, the number of follicular waves affects endocrine, ovarian, and behavioral events during a normal estrous cycle. However, in Mexican-native Criollo cattle, a shortly and recently domesticated breed, the association between wave patterns and follicular development has not been studied. The objective of this study was to evaluate the effect of number of follicular waves in an estrous cycle on development of anovulatory and ovulatory follicles, corpus luteum (CL) development and functionality, as well as estrual behavior in Criollo cows. Ovarian follicular activities of 22 cycling multiparous Criollo cows were recorded daily by transrectal ultrasound examinations during a complete estrous cycle. Additionally, blood samples were collected daily to determine serum progesterone concentrations. Only two- (n = 17, 77.3%) and three-wave follicular (n = 5, 22.7%) patterns were observed. Duration of estrus, length of estrous cycle, and length of follicular and luteal phases were similar (P > 0.05) between cycles of two and three waves. Two-wave cows ovulated earlier (P < 0.05) after detection of estrus than three-wave cows. Detected day and maximum diameter of first anovulatory follicle were not affected (P > 0.05) by number of waves. Growth rate of first dominant follicle was higher (P < 0.05) in three-wave cycles. Onset of regression of the first dominant follicle was earlier (P < 0.01) in cycles with three waves than in those with two waves. In two-wave cycles, ovulatory follicles were detected earlier (P < 0.01) and had lower (P < 0.01) growth rate than in three-wave cycles. Development (i.e., maximum diameter and volume) and functionality (minimum and maximum progesterone concentration) of CL were similar (P > 0.05) between two- and three-wave patterns. In conclusion, Criollo cows have two or three follicular waves per estrous cycle, which alters partially ovulatory follicle development and ovulation time after detection of estrus. Length of estrous cycle, as well as CL development and functionality, was not affected by number of follicular waves.

Use or Reduction of Propagation and Noise Effects in Distributed Military Systems: Electromagnetic Wave Propagation Panel Symposium Held in Rethymno, Crete, Greece on 15-18 October 1990 (Utilisation ou Reduction des Effets de la Propagation et du Bruit dans les Systemes Militaires Distribues)

DTIC Science & Technology

1991-06-01

resolution are essential. The resulting frequency Paul A K., Anharmonic Frequency Analysis, pattern would be nonuniform and would change Mati. Comp...veloppement laire donnte par Ia relation empiri- de la trainte ainsi que Ie mouvemnent des par que 1231 ticules neutres dans Ia haute atmosph~re. log D...1515, 1973b. Bahar, E., Depolarization in nonuniform multi- layered structures--Full wave solutions, J. Math. Phys,, 15(2), 202-208, 1974, Ba , and M

A 1-2 GHz pulsed and continuous wave electron paramagnetic resonance spectrometer

NASA Astrophysics Data System (ADS)

Quine, Richard W.; Rinard, George A.; Ghim, Barnard T.; Eaton, Sandra S.; Eaton, Gareth R.

1996-07-01

A microwave bridge has been constructed that performs three types of electron paramagnetic resonance experiments: continuous wave, pulsed saturation recovery, and pulsed electron spin echo. Switching between experiment types can be accomplished via front-panel switches without moving the sample. Design features and performance of the bridge and of a resonator used in testing the bridge are described. The bridge is constructed of coaxial components connected with semirigid cable. Particular attention has been paid to low-noise design of the preamplifier and stability of automatic frequency control circuits. The bridge incorporates a Smith chart display and phase adjustment meter for ease of tuning.

An Experiment on Two-Dimensional Interaction of Solitary Waves in Shallow Water System

NASA Astrophysics Data System (ADS)

Tsuji, Hidekazu; Yufu, Kei; Marubayashi, Kenji

2012-11-01

The dynamics of solitary waves in horizontally two-dimensional region is not yet well understood. Recently two-dimensional soliton interaction of Kadmotsetv-Petviashvili (KP) equation which describes the weakly nonlinear long wave in shallow water system has been theoretically studied (e.g. Kodama (2010)). It is clarified that the ``resonant'' interaction which forms Y-shaped triad can be described by exact solution. Li et al. (2011) experimentally studied the reflection of solitary wave at the wall and verified the theory of KP equation. To investigate more general interaction process, an experiment in wave tank using two wave makers which are controlled independently is carried out. The wave tank is 4 m in length and 3.6 m in width. The depth of the water is about 8cm. The wavemakers, which are piston-type and have board about 1.5 m in length, can produce orderly solitary wave which amplitude is 1.0-3.5 cm. We observe newly generated solitary wave due to interaction of original solitary waves which have different amplitude and/or propagation direction. The results are compared with the aforementioned theory of KP equation.