Research Application Paper

ERIC Educational Resources Information Center

Baskas, Richard S.

2011-01-01

The purpose of this study is to compare and contrast two types of scholarly article designs, quantitative and qualitative, as to how two research designs can be similar and different, and how the authors conduct their research and present their results. When researching and analyzing two scholarly articles of different design types, it is…

Effect of study design and setting on tuberculosis clustering estimates using Mycobacterial Interspersed Repetitive Units-Variable Number Tandem Repeats (MIRU-VNTR): a systematic review.

PubMed

Mears, Jessica; Abubakar, Ibrahim; Cohen, Theodore; McHugh, Timothy D; Sonnenberg, Pam

2015-01-21

To systematically review the evidence for the impact of study design and setting on the interpretation of tuberculosis (TB) transmission using clustering derived from Mycobacterial Interspersed Repetitive Units-Variable Number Tandem Repeats (MIRU-VNTR) strain typing. MEDLINE, EMBASE, CINHAL, Web of Science and Scopus were searched for articles published before 21st October 2014. Studies in humans that reported the proportion of clustering of TB isolates by MIRU-VNTR were included in the analysis. Univariable meta-regression analyses were conducted to assess the influence of study design and setting on the proportion of clustering. The search identified 27 eligible articles reporting clustering between 0% and 63%. The number of MIRU-VNTR loci typed, requiring consent to type patient isolates (as a proxy for sampling fraction), the TB incidence and the maximum cluster size explained 14%, 14%, 27% and 48% of between-study variation, respectively, and had a significant association with the proportion of clustering. Although MIRU-VNTR typing is being adopted worldwide there is a paucity of data on how study design and setting may influence estimates of clustering. We have highlighted study design variables for consideration in the design and interpretation of future studies. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Design of a finger base-type pulse oximeter

NASA Astrophysics Data System (ADS)

Lin, Bor-Shyh; Huang, Cheng-Yang; Chen, Chien-Yue; Lin, Jiun-Hung

2016-01-01

A pulse oximeter is a common medical instrument used for noninvasively monitoring arterial oxygen saturation (SpO2). Currently, the fingertip-type pulse oximeter is the prevalent type of pulse oximeter used. However, it is inconvenient for long-term monitoring, such as that under motion. In this study, a wearable and wireless finger base-type pulse oximeter was designed and implemented using the tissue optical simulation technique and the Monte Carlo method. The results revealed that a design involving placing the light source at 135°-165° and placing the detector at 75°-90° or 90°-105° yields the optimal conditions for measuring SpO2. Finally, the wearable and wireless finger base-type pulse oximeter was implemented and compared with the commercial fingertip-type pulse oximeter. The experimental results showed that the proposed optimal finger base-type pulse oximeter design can facilitate precise SpO2 measurement.

Design of a finger base-type pulse oximeter.

PubMed

Lin, Bor-Shyh; Huang, Cheng-Yang; Chen, Chien-Yue; Lin, Jiun-Hung

2016-01-01

A pulse oximeter is a common medical instrument used for noninvasively monitoring arterial oxygen saturation (SpO2). Currently, the fingertip-type pulse oximeter is the prevalent type of pulse oximeter used. However, it is inconvenient for long-term monitoring, such as that under motion. In this study, a wearable and wireless finger base-type pulse oximeter was designed and implemented using the tissue optical simulation technique and the Monte Carlo method. The results revealed that a design involving placing the light source at 135°-165° and placing the detector at 75°-90° or 90°-105° yields the optimal conditions for measuring SpO2. Finally, the wearable and wireless finger base-type pulse oximeter was implemented and compared with the commercial fingertip-type pulse oximeter. The experimental results showed that the proposed optimal finger base-type pulse oximeter design can facilitate precise SpO2 measurement.

Observational Studies: Cohort and Case-Control Studies

PubMed Central

Song, Jae W.; Chung, Kevin C.

2010-01-01

Observational studies are an important category of study designs. To address some investigative questions in plastic surgery, randomized controlled trials are not always indicated or ethical to conduct. Instead, observational studies may be the next best method to address these types of questions. Well-designed observational studies have been shown to provide results similar to randomized controlled trials, challenging the belief that observational studies are second-rate. Cohort studies and case-control studies are two primary types of observational studies that aid in evaluating associations between diseases and exposures. In this review article, we describe these study designs, methodological issues, and provide examples from the plastic surgery literature. PMID:20697313

A study of general instability of box beams with truss-type ribs

NASA Technical Reports Server (NTRS)

Lundquist, Eugene E; Schwartz, Edward B

1942-01-01

The design of truss-type ribs for box beams is theoretically treated with regard to the function of the ribs in stabilizing the compression flange. The theory is applied to a design problem, and the results of this application are presented and discussed in relation to the general problem of rib design. The results of some tests made as a part of this general study are presented in an appendix.

Space Allocation in the Award-Winning Adult ICUs of the Last Two Decades (1993-2012): An Exploratory Study.

PubMed

Rashid, Mahbub

2014-01-01

This exploratory study describes space allocation among different generic categories of functions in adult intensive care units (ICUs) showing how the amount of space of any one functional category is related to that of another functional category, and how different strategic choices, such as size, construction type, specialty type, and layout type, affect space allocation in these ICUs. Even though critical care practice has already undergone significant changes in the last few decades, it is still an evolving domain of medical practice. As a result, ICU design is also evolving as new regulatory standards, new technologies, and new clinical models are being introduced. A good understanding of the above issues regarding space allocation may help us better guide the evolution of ICU design. The study includes a set of 25 adult ICUs that were recognized between 1993 and 2012 by the Society of Critical Care Medicine (SCCM), the American Association of Critical Care Nurses (AACCN), and the American Institute of Architects Academy of Architecture for Health (AIA AAH) for their efforts to promote healing of the critically ill and injured patients through the design of the critical care unit environment. The study finds notable differences in space allocation among different generic categories of functions between the ICUs of the first decade (1993-2002) and the second decade (2003-2012). The study also finds notable differences in space allocation among different generic categories of functions in relation to size, construction type, specialty type, and layout type. Despite several limitations, the study should help design better adult ICUs based on an evidence-based understanding of the relationships between space allocation and strategic choices. Construction, critical care/intensive care, evidence-based design, planning, project management.

An Examination of Self-Directed Learning Readiness in Executive-Level Fire Officers

ERIC Educational Resources Information Center

Knight, Steven G.

2012-01-01

The purpose of this study was to examine the self-directed learning readiness in executive fire officers in relation to the independent variables of personality type, educational attainment, and professional designation. This research utilized a quantitative design. This study utilized the Myers-Briggs Type Indicator (MBTI) and the Self-Directed…

Design studies of continuously variable transmissions for electric vehicles

NASA Technical Reports Server (NTRS)

Parker, R. J.; Loewenthal, S. H.; Fischer, G. K.

1981-01-01

Preliminary design studies were performed on four continuously variable transmission (CVT) concepts for use with a flywheel equipped electric vehicle of 1700 kg gross weight. Requirements of the CVT's were a maximum torque of 450 N-m (330 lb-ft), a maximum output power of 75 kW (100 hp), and a flywheel speed range of 28,000 to 14,000 rpm. Efficiency, size, weight, cost, reliability, maintainability, and controls were evaluated for each of the four concepts which included a steel V-belt type, a flat rubber belt type, a toroidal traction type, and a cone roller traction type. All CVT's exhibited relatively high calculated efficiencies (68 percent to 97 percent) over a broad range of vehicle operating conditions. Estimated weight and size of these transmissions were comparable to or less than equivalent automatic transmission. The design of each concept was carried through the design layout stage.

77 FR 28883 - Cooperative Agreement To Support Innovation in Vaccine Clinical Trial Design and Collaboration in...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-16

... years there has been interest in finding innovative study designs to speed development of promising new... various types of adaptive trial designs and other innovations in clinical study designs. 2. Improving... of study designs, individual risk perception, and vaccination choice. One approach to obtain this...

Designing SoTL Studies--Part II: Practicality

ERIC Educational Resources Information Center

Bartsch, Robert A.

2013-01-01

This chapter suggests solutions to common practical problems in designing SoTL studies. In addition, the advantages and disadvantages of different types of designs are discussed. [Part I available at EJ1029363.

Generalized Subset Designs in Analytical Chemistry.

PubMed

Surowiec, Izabella; Vikström, Ludvig; Hector, Gustaf; Johansson, Erik; Vikström, Conny; Trygg, Johan

2017-06-20

Design of experiments (DOE) is an established methodology in research, development, manufacturing, and production for screening, optimization, and robustness testing. Two-level fractional factorial designs remain the preferred approach due to high information content while keeping the number of experiments low. These types of designs, however, have never been extended to a generalized multilevel reduced design type that would be capable to include both qualitative and quantitative factors. In this Article we describe a novel generalized fractional factorial design. In addition, it also provides complementary and balanced subdesigns analogous to a fold-over in two-level reduced factorial designs. We demonstrate how this design type can be applied with good results in three different applications in analytical chemistry including (a) multivariate calibration using microwave resonance spectroscopy for the determination of water in tablets, (b) stability study in drug product development, and (c) representative sample selection in clinical studies. This demonstrates the potential of generalized fractional factorial designs to be applied in many other areas of analytical chemistry where representative, balanced, and complementary subsets are required, especially when a combination of quantitative and qualitative factors at multiple levels exists.

Magic Mirror, On the Wall-Which Is the Right Study Design of Them All?-Part II.

PubMed

Vetter, Thomas R

2017-07-01

The assessment of a new or existing treatment or other intervention typically answers 1 of 3 central research-related questions: (1) "Can it work?" (efficacy); (2) "Does it work?" (effectiveness); or (3) "Is it worth it?" (efficiency or cost-effectiveness). There are a number of study designs that, on a situational basis, are appropriate to apply in conducting research. These study designs are generally classified as experimental, quasiexperimental, or observational, with observational studies being further divided into descriptive and analytic categories. This second of a 2-part statistical tutorial reviews these 3 salient research questions and describes a subset of the most common types of observational study designs. Attention is focused on the strengths and weaknesses of each study design to assist in choosing which is appropriate for a given study objective and hypothesis as well as the particular study setting and available resources and data. Specific studies and papers are highlighted as examples of a well-chosen, clearly stated, and properly executed study design type.

Magic Mirror, on the Wall-Which Is the Right Study Design of Them All?-Part I.

PubMed

Vetter, Thomas R

2017-06-01

The assessment of a new or existing treatment or intervention typically answers 1 of 3 research-related questions: (1) "Can it work?" (efficacy); (2) "Does it work?" (effectiveness); and (3) "Is it worth it?" (efficiency or cost-effectiveness). There are a number of study designs that on a situational basis are appropriate to apply in conducting research. These study designs are classified as experimental, quasi-experimental, or observational, with observational studies being further divided into descriptive and analytic categories. This first of a 2-part statistical tutorial reviews these 3 salient research questions and describes a subset of the most common types of experimental and quasi-experimental study design. Attention is focused on the strengths and weaknesses of each study design to assist in choosing which is appropriate for a given study objective and hypothesis as well as the particular study setting and available resources and data. Specific studies and papers are highlighted as examples of a well-chosen, clearly stated, and properly executed study design type.

HEALTHY study rationale, design and methods: Moderating risk of type 2 diabetes in multi-ethnic middle school students

USDA-ARS?s Scientific Manuscript database

The HEALTHY primary prevention trial was designed and implemented in response to the growing numbers of children and adolescents being diagnosed with type 2 diabetes. The objective was to moderate risk factors for type 2 diabetes. Modifiable risk factors measured were indicators of adiposity and gly...

Design of spoke type motor and magnetizer for improving efficiency based rare-earth-free permanent-magnet motor

NASA Astrophysics Data System (ADS)

Kim, Young Hyun; Cheon, Byung Chul; Lee, Jung Ho

2018-05-01

This study proposes criteria for both optimal-shape and magnetizer-system designs to be used for a high-output spoke-type motor. The study also examines methods of reducing high-cogging torque and torque ripple, to prevent noise and vibration. The optimal design of the stator and rotor can be enhanced using both a response surface method and finite element method. In addition, a magnetizer system is optimally designed for the magnetization of permanent magnets for use in the motor. Finally, this study verifies that the proposed motor can efficiently replace interior permanent magnet synchronous motor in many industries.

Design improvement of a pump wear ring labyrinth seal

NASA Technical Reports Server (NTRS)

Rhode, David L.; Morrison, G. L.; Ko, S. H.; Waughtal, S. P.

1987-01-01

The investigation was successful in obtaining two improved designs for the impeller wear ring seal of the liquid hydrogen turbopump of interest. A finite difference computer code was extensively used in a parametric computational study in determining a cavity configuration with high flow resistance due to turbulence dissipation. These two designs, along with that currently used, were fabricated and tested. The improved designs were denoted Type O and Type S. The measurements showed that Type O and Type S given 67 and 30 percent reduction in leakage over the current design, respectively. It was found that the number of cavities, the step height and the presence of a small stator groove are quite important design features. Also, the tooth thickness is of some significance. Finally, the tooth height and an additional large cavity cut out from the stator (upstream of the step) are of negligible importance.

The Effect of Prior Knowledge and Feedback Type Design on Student Achievement and Satisfaction in Introductory Accounting

ERIC Educational Resources Information Center

Campbell, Donald P.

2013-01-01

This study investigated the effect of student prior knowledge and feedback type on student achievement and satisfaction in an introductory managerial accounting course using computer-based formative assessment tools. The study involved a redesign of the existing Job Order Costing unit using the ADDIE model of instructional design. The…

Economics of PPP-insulated pipe-type cable: Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ernst, A.

1987-10-01

This study has been designed to establish the economic range of application and the potential cost advantage of PPP-insulated pipe-type cable compared with presently utilized paper-insulated designs. The study is in two parts. In the first part the electrical and thermal characteristics of a range of cable sizes are tabulated. This data can be utilized for planning and economic comparison purposes. In the second part 12 transmission load scenarios are studied to determine the relative cost of various designs considering materials, installation and the losses over a wide range of assumptions.

Practicing universal design to actual hand tool design process.

PubMed

Lin, Kai-Chieh; Wu, Chih-Fu

2015-09-01

UD evaluation principles are difficult to implement in product design. This study proposes a methodology for implementing UD in the design process through user participation. The original UD principles and user experience are used to develop the evaluation items. Difference of product types was considered. Factor analysis and Quantification theory type I were used to eliminate considered inappropriate evaluation items and to examine the relationship between evaluation items and product design factors. Product design specifications were established for verification. The results showed that converting user evaluation into crucial design verification factors by the generalized evaluation scale based on product attributes as well as the design factors applications in product design can improve users' UD evaluation. The design process of this study is expected to contribute to user-centered UD application. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Discriminatory validity of the Aspects of Wheelchair Mobility Test as demonstrated by a comparison of four wheelchair types designed for use in low-resource areas

PubMed Central

Hamm, Elisa; Wee, Joy

2017-01-01

Background Comparative effectiveness research on wheelchairs available in low-resource areas is needed to enable effective use of limited funds. Mobility on commonly encountered rolling environments is a key aspect of function. High variation in capacity among wheelchair users can mask changes in mobility because of wheelchair design. A repeated measures protocol in which the participants use one type of wheelchair and then another minimises the impact of individual variation. Objectives The Aspects of Wheelchair Mobility Test (AWMT) was designed to be used in repeated measures studies in low-resource areas. It measures the impact of different wheelchair types on physical performance in commonly encountered rolling environments and provides an opportunity for qualitative and quantitative participant response. This study sought to confirm the ability of the AWMT to discern differences in mobility because of wheelchair design. Method Participants were wheelchair users at a boarding school for students with disabilities in a low-resource area. Each participant completed timed tests on measured tracks on rough and smooth surfaces, in tight spaces and over curbs. Four types of wheelchairs designed for use in low-resource areas were included. Results The protocol demonstrated the ability to discriminate changes in mobility of individuals because of wheelchair type. Conclusion Comparative effectiveness studies with this protocol can enable beneficial change. This is illustrated by design alterations by wheelchair manufacturers in response to results. PMID:28936413

Communications Style Guide. Fourth Edition

DTIC Science & Technology

2010-08-01

ethnography , phenomenological study , grounded theory study , and content analysis. You want to choose your research design based on your topic and how you...accessed 27 May 2008). 38 design or an historical research design. There are five basic types of qualitative research designs: case study ...suits the purpose of your study . Generally, while a student of MCU, you will use qualitative research

A Pilot Project to Develop and Assess a Health Education Programme for Type 2 Diabetes Mellitus Patients

ERIC Educational Resources Information Center

Atak, Nazli; Arslan, Umit

2005-01-01

Objective: The current research was designed to develop a health education programme for type 2 diabetes mellitus based on the Taba-Tyler model and to evaluate its effect. Design: The study was quasi-experimental in design. Setting: Fifty-five patients from the Endocrinology and Metabolism Unit, University Hospital of Ankara. Method: An education…

An Exploratory Study of the Effect of Enclosed Structure on Type Design with Fixation Dispersion: Evidence from Eye Movements

ERIC Educational Resources Information Center

Ma, Min-Yuan; Chuang, Hsien-Chih

2017-01-01

Type design is the process of re-organizing visual elements and their corresponding meanings into a new organic entity, particularly for the highly logographic Chinese characters whose intrinsic features are retained even after re-organization. Due to this advantage, designers believe that such a re-organization process will not affect Chinese…

Family-Work Conflict and Type-E Personality as Stress Inducers in Married Female Nigerian University Administrators

ERIC Educational Resources Information Center

Shobola, A. A.; Nwoha, P. C.

2013-01-01

This piece of article is culled from a larger study. The study investigated the relationship between family-work conflict, Type-E personality and stress in married female Nigerian University Administrators. The study adopted ex-post facto design. The sample consisted of 800 female administrators in the senior cadre of executive/administrative…

A Study on the Relationship between Design Elements of Outdoor Leisure Spaces and Types of Leisure Activities in Sustainable Community Development - A Case Study on Tainan, Taiwan

NASA Astrophysics Data System (ADS)

Chang, J. H.; Zhang, H.

2018-01-01

Sustainable community development encompasses three aspects: “Lifestyle”, “Production” and “Ecology”. Among them, “Lifestyle” is closest to people and reflects basic human needs. Creating outdoor spaces that encourage residents to engage in leisure activities will not only provide them with spiritual sustenance but also fulfil one of the key criteria in sustainable community development. This study explores the relationship between design elements of outdoor leisure spaces and types of leisure activities from residents' perspective with the goal to inform future spatial planning. The study collected 365 valid questionnaires from Tainan residents. Factor analysis was used to extract factors from design elements of outdoor leisure spaces, and regression analysis was applied to understand the effect level. The result shows design elements have positive effect on the types of leisure activities. In addition, different elements exert different influences on the choice of activities.

Office type's association to employees' welfare: Three studies.

PubMed

Danielsson, Christina Bodin

2016-08-12

The workplace is important for employees' daily life and well-being. This article investigates exploratory the office design's role for employees' welfare from different perspectives. By comparing different studies of the office, type's influence on different factors of employees' welfare the aim is to see if any common patterns exist in office design's impact. The three included studies investigate office type's association with employees' welfare by measuring its influence on: a) perception of leadership, b) sick leave, and c) job satisfaction.The sample consists of office employees from a large, national representative work environment survey that work in one of the seven identified office types in contemporary office design: (1) cell-offices; (2) shared-room offices; (3) small, (4) medium-sized and (5) large open-plan offices; (6) flex-offices and (7) combi-offices. Statistical method used is multivariate logistic and linear regression analysis with adjustment for background factors. Overall results show that shared-room office, traditional open plan offices and flex-office stand out negatively, but to different degree(s) on the different outcomes measured. This explorative comparison of different studies finds a pattern of office types that repeatedly show indications of negative influence on employees' welfare, but further studies are needed to clarify this.

Some design constraints required for the assembly of software components: The incorporation of atomic abstract types into generically structured abstract types

NASA Technical Reports Server (NTRS)

Johnson, Charles S.

1986-01-01

It is nearly axiomatic, that to take the greatest advantage of the useful features available in a development system, and to avoid the negative interactions of those features, requires the exercise of a design methodology which constrains their use. A major design support feature of the Ada language is abstraction: for data, functions processes, resources, and system elements in general. Atomic abstract types can be created in packages defining those private types and all of the overloaded operators, functions, and hidden data required for their use in an application. Generically structured abstract types can be created in generic packages defining those structured private types, as buildups from the user-defined data types which are input as parameters. A study is made of the design constraints required for software incorporating either atomic or generically structured abstract types, if the integration of software components based on them is to be subsequently performed. The impact of these techniques on the reusability of software and the creation of project-specific software support environments is also discussed.

Numerical Simulation and Experimental Study of a Dental Handpiece Air Turbine

NASA Astrophysics Data System (ADS)

Hsu, Chih-Neng; Chiang, Hsiao-Wei D.; Chang, Ya-Yi

2011-06-01

Dental air turbine handpieces have been widely used in clinical dentistry for over 30 years, however, little work has been reported on their performance. In dental air turbine handpieces, the types of flow channel and turbine blade shape can have very different designs. These different designs can have major influence on the torque, rotating speed, and power performance. This research is focused on the turbine blade and the flow channel designs. Using numerical simulation and experiments, the key design parameters which influence the performance of dental hand pieces can be studied. Three types of dental air turbine designs with different turbine blades, nozzle angles, nozzle flow channels, and shroud clearances were tested and analyzed. Very good agreement was demonstrated between the numerical simulation analyses and the experiments. Using the analytical model, parametric studies were performed to identify key design parameters.

Variation in Research Designs Used to Test the Effectiveness of Dissemination and Implementation Strategies: A Review.

PubMed

Mazzucca, Stephanie; Tabak, Rachel G; Pilar, Meagan; Ramsey, Alex T; Baumann, Ana A; Kryzer, Emily; Lewis, Ericka M; Padek, Margaret; Powell, Byron J; Brownson, Ross C

2018-01-01

The need for optimal study designs in dissemination and implementation (D&I) research is increasingly recognized. Despite the wide range of study designs available for D&I research, we lack understanding of the types of designs and methodologies that are routinely used in the field. This review assesses the designs and methodologies in recently proposed D&I studies and provides resources to guide design decisions. We reviewed 404 study protocols published in the journal Implementation Science from 2/2006 to 9/2017. Eligible studies tested the efficacy or effectiveness of D&I strategies (i.e., not effectiveness of the underlying clinical or public health intervention); had a comparison by group and/or time; and used ≥1 quantitative measure. Several design elements were extracted: design category (e.g., randomized); design type [e.g., cluster randomized controlled trial (RCT)]; data type (e.g., quantitative); D&I theoretical framework; levels of treatment assignment, intervention, and measurement; and country in which the research was conducted. Each protocol was double-coded, and discrepancies were resolved through discussion. Of the 404 protocols reviewed, 212 (52%) studies tested one or more implementation strategy across 208 manuscripts, therefore meeting inclusion criteria. Of the included studies, 77% utilized randomized designs, primarily cluster RCTs. The use of alternative designs (e.g., stepped wedge) increased over time. Fewer studies were quasi-experimental (17%) or observational (6%). Many study design categories (e.g., controlled pre-post, matched pair cluster design) were represented by only one or two studies. Most articles proposed quantitative and qualitative methods (61%), with the remaining 39% proposing only quantitative. Half of protocols (52%) reported using a theoretical framework to guide the study. The four most frequently reported frameworks were Consolidated Framework for Implementing Research and RE-AIM ( n  = 16 each), followed by Promoting Action on Research Implementation in Health Services and Theoretical Domains Framework ( n  = 12 each). While several novel designs for D&I research have been proposed (e.g., stepped wedge, adaptive designs), the majority of the studies in our sample employed RCT designs. Alternative study designs are increasing in use but may be underutilized for a variety of reasons, including preference of funders or lack of awareness of these designs. Promisingly, the prevalent use of quantitative and qualitative methods together reflects methodological innovation in newer D&I research.

Post-Cam Design and Contact Stress on Tibial Posts in Posterior-Stabilized Total Knee Prostheses: Comparison Between a Rounded and a Squared Design.

PubMed

Watanabe, Toshifumi; Koga, Hideyuki; Horie, Masafumi; Katagiri, Hiroki; Sekiya, Ichiro; Muneta, Takeshi

2017-12-01

The post-cam mechanism in posterior stabilized (PS) prostheses plays an important role in total knee arthroplasty (TKA). The purpose of this study is to clarify the difference of the contact stress on the tibial post between a rounded post-cam design and a squared design during deep knee flexion and at hyperextension using the three-dimensional (3D) finite element models. We created 2 types of 3D, finite element models of PS prostheses (types A and B), whose surfaces were identical except for the post-cam geometries: type A has a rounded post-cam design, while type B has a squared design. Both types have a similar curved-shape intercondylar notch of the femoral component. Stress distributions, peak contact stresses, and contact areas on the tibial posts at 90°, 120°, and 150° flexion with/without 10° tibial internal rotation and at 10° hyperextension were compared between the 2 models. Type B demonstrated more concentrated stress distribution compared to type A. The peak contact stresses were similar in both groups during neutral flexion; however, the stresses were much higher in type B during flexion with 10° rotation and at hyperextension. The higher peak contact stresses corresponded to the smaller contact areas in the tibial post. A rounded post-cam design demonstrated less stress concentration during flexion with rotation and at hyperextension compared with a squared design. The results would be useful for development of implant designs and prediction of the contact stress on the tibial post in PS total knee arthroplasty. Copyright © 2017 Elsevier Inc. All rights reserved.

A Systematic Review on the Designs of Clinical Technology: Findings and Recommendations for Future Research

PubMed Central

PhD, Greg Alexander; Staggers, Nancy

2010-01-01

Human factors (HF) studies are increasingly important as technology infuses into clinical settings. No nursing research reviews exist in this area. The authors conducted a systematic review on designs of clinical technology, 34 articles with 50 studies met inclusion criteria. Findings were classified into three categories based on HF research goals. The majority of studies evaluated effectiveness of clinical design; efficiency was fewest. Current research ranges across many interface types examined with no apparent pattern or obvious rationale. Future research should expand types, settings, participants; integrate displays; and expand outcome variables. PMID:19707093

Can Research Design Explain Variation in Head Start Research Results? A Meta-Analysis of Cognitive and Achievement Outcomes

ERIC Educational Resources Information Center

Shager, Hilary M.; Schindler, Holly S.; Magnuson, Katherine A.; Duncan, Greg J.; Yoshikawa, Hirokazu; Hart, Cassandra M. D.

2013-01-01

This study explores the extent to which differences in research design explain variation in Head Start program impacts. We employ meta-analytic techniques to predict effect sizes for cognitive and achievement outcomes as a function of the type and rigor of research design, quality and type of outcome measure, activity level of control group, and…

Biomarker discovery study design for type 1 diabetes in The Environmental Determinants of Diabetes in the Young (TEDDY) study.

PubMed

Lee, Hye-Seung; Burkhardt, Brant R; McLeod, Wendy; Smith, Susan; Eberhard, Chris; Lynch, Kristian; Hadley, David; Rewers, Marian; Simell, Olli; She, Jin-Xiong; Hagopian, Bill; Lernmark, Ake; Akolkar, Beena; Ziegler, Anette G; Krischer, Jeffrey P

2014-07-01

The Environmental Determinants of Diabetes in the Young planned biomarker discovery studies on longitudinal samples for persistent confirmed islet cell autoantibodies and type 1 diabetes using dietary biomarkers, metabolomics, microbiome/viral metagenomics and gene expression. This article describes the details of planning The Environmental Determinants of Diabetes in the Young biomarker discovery studies using a nested case-control design that was chosen as an alternative to the full cohort analysis. In the frame of a nested case-control design, it guides the choice of matching factors, selection of controls, preparation of external quality control samples and reduction of batch effects along with proper sample allocation. Our design is to reduce potential bias and retain study power while reducing the costs by limiting the numbers of samples requiring laboratory analyses. It also covers two primary end points (the occurrence of diabetes-related autoantibodies and the diagnosis of type 1 diabetes). The resulting list of case-control matched samples for each laboratory was augmented with external quality control samples. Copyright © 2013 John Wiley & Sons, Ltd.

A Course in Medical Research Study Design and Analysis.

ERIC Educational Resources Information Center

Linskey, Mark E.; And Others

1987-01-01

A course to familiarize medical students with the principles of good medical research study design and analysis focuses on three types of studies: clinical trials, laboratory science, and epidemiology and biostatistics. (MSE)

Multi-Reader ROC studies with Split-Plot Designs: A Comparison of Statistical Methods

PubMed Central

Obuchowski, Nancy A.; Gallas, Brandon D.; Hillis, Stephen L.

2012-01-01

Rationale and Objectives Multi-reader imaging trials often use a factorial design, where study patients undergo testing with all imaging modalities and readers interpret the results of all tests for all patients. A drawback of the design is the large number of interpretations required of each reader. Split-plot designs have been proposed as an alternative, in which one or a subset of readers interprets all images of a sample of patients, while other readers interpret the images of other samples of patients. In this paper we compare three methods of analysis for the split-plot design. Materials and Methods Three statistical methods are presented: Obuchowski-Rockette method modified for the split-plot design, a newly proposed marginal-mean ANOVA approach, and an extension of the three-sample U-statistic method. A simulation study using the Roe-Metz model was performed to compare the type I error rate, power and confidence interval coverage of the three test statistics. Results The type I error rates for all three methods are close to the nominal level but tend to be slightly conservative. The statistical power is nearly identical for the three methods. The coverage of 95% CIs fall close to the nominal coverage for small and large sample sizes. Conclusions The split-plot MRMC study design can be statistically efficient compared with the factorial design, reducing the number of interpretations required per reader. Three methods of analysis, shown to have nominal type I error rate, similar power, and nominal CI coverage, are available for this study design. PMID:23122570

Multi-reader ROC studies with split-plot designs: a comparison of statistical methods.

PubMed

Obuchowski, Nancy A; Gallas, Brandon D; Hillis, Stephen L

2012-12-01

Multireader imaging trials often use a factorial design, in which study patients undergo testing with all imaging modalities and readers interpret the results of all tests for all patients. A drawback of this design is the large number of interpretations required of each reader. Split-plot designs have been proposed as an alternative, in which one or a subset of readers interprets all images of a sample of patients, while other readers interpret the images of other samples of patients. In this paper, the authors compare three methods of analysis for the split-plot design. Three statistical methods are presented: the Obuchowski-Rockette method modified for the split-plot design, a newly proposed marginal-mean analysis-of-variance approach, and an extension of the three-sample U-statistic method. A simulation study using the Roe-Metz model was performed to compare the type I error rate, power, and confidence interval coverage of the three test statistics. The type I error rates for all three methods are close to the nominal level but tend to be slightly conservative. The statistical power is nearly identical for the three methods. The coverage of 95% confidence intervals falls close to the nominal coverage for small and large sample sizes. The split-plot multireader, multicase study design can be statistically efficient compared to the factorial design, reducing the number of interpretations required per reader. Three methods of analysis, shown to have nominal type I error rates, similar power, and nominal confidence interval coverage, are available for this study design. Copyright © 2012 AUR. All rights reserved.

Rational Design of Peptide Vaccines Against Multiple Types of Human Papillomavirus

PubMed Central

Dey, Sumanta; De, Antara; Nandy, Ashesh

2016-01-01

Human papillomavirus (HPV) occurs in many types, some of which cause cervical, genital, and other cancers. While vaccination is available against the major cancer-causing HPV types, many others are not covered by these preventive measures. Herein, we present a bioinformatics study for the designing of multivalent peptide vaccines against multiple HPV types as an alternative strategy to the virus-like particle vaccines being used now. Our technique of rational design of peptide vaccines is expected to ensure stability of the vaccine against many cycles of mutational changes, elicit immune response, and negate autoimmune possibilities. Using the L1 capsid protein sequences, we identified several peptides for potential vaccine design for HPV 16, 18, 33, 35, 45, and 11 types. Although there are concerns about the epitope-binding affinities for the peptides identified in this process, the technique indicates possibilities of multivalent, adjuvanted, peptide vaccines against a wider range of HPV types, and tailor-made different combinations of the peptides to address frequency variations of types over different population groups as required for prophylaxis and at lower cost than are in use at the present time. PMID:27279731

Benchmarking CRISPR on-target sgRNA design.

PubMed

Yan, Jifang; Chuai, Guohui; Zhou, Chi; Zhu, Chenyu; Yang, Jing; Zhang, Chao; Gu, Feng; Xu, Han; Wei, Jia; Liu, Qi

2017-02-15

CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats)-based gene editing has been widely implemented in various cell types and organisms. A major challenge in the effective application of the CRISPR system is the need to design highly efficient single-guide RNA (sgRNA) with minimal off-target cleavage. Several tools are available for sgRNA design, while limited tools were compared. In our opinion, benchmarking the performance of the available tools and indicating their applicable scenarios are important issues. Moreover, whether the reported sgRNA design rules are reproducible across different sgRNA libraries, cell types and organisms remains unclear. In our study, a systematic and unbiased benchmark of the sgRNA predicting efficacy was performed on nine representative on-target design tools, based on six benchmark data sets covering five different cell types. The benchmark study presented here provides novel quantitative insights into the available CRISPR tools. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

A District-Wide High School Formative Experiment Designed to Improve Student Achievement

ERIC Educational Resources Information Center

Frey, Nancy; Fisher, Douglas

2013-01-01

This study focuses on district leadership designed to improve student achievement. We employed a formative experiment design methodology, a type of design study, to investigate the leadership efforts to improve student and teacher learning. The findings suggest that leadership through professional development and an instructional framework led to…

Design of clinical trials for new drugs in animals.

PubMed

Muser, R K

1980-05-15

Consideration of the intended purpose, an effort to ask specific questions that can be answered by specific data, selection of the correct values to be measured, and investigators who are able to conduct the study, will make it possible to design clinical studies properly. The ethical need to avoid unnecessary suffering of experimental animals and rules and regulations in effect at the time of clinical trials will dictate certain aspects of the design. The type of product to be evaluated, its mode of administration, the type of animal in which the drug will be used, the type of investigator who will collect the data, and the individual who will use the drug, will determine the mechanical part of the protocol. All of these factors need to be considered and discussed with all participants, which may include biostatisticians, regulatory authorities, investigators, and other individuals, to ensure that a rational design is chosen.

A model of awareness to enhance our understanding of interprofessional collaborative care delivery and health information system design to support it.

PubMed

Kuziemsky, Craig E; Varpio, Lara

2011-08-01

As more healthcare delivery is provided by collaborative teams there is a need for enhanced design of health information systems (HISs) to support collaborative care delivery. The purpose of this study was to develop a model of the different types of awareness that exist in interprofessional collaborative care (ICC) delivery to inform HIS design to support ICC. Qualitative data collection and analysis was done. The data sources consisted of 90 h of non-participant observations and 30 interviews with nurses, physicians, medical residents, volunteers, and personal support workers. Many of the macro-level ICC activities (e.g. morning rounds, shift change) were constituted by micro-level activities that involved different types of awareness. We identified four primary types of ICC awareness: patient, team member, decision making, and environment. Each type of awareness is discussed and supported by study data. We also discuss implication of our findings for enhanced design of existing HISs as well as providing insight on how HISs could be better designed to support ICC awareness. Awareness is a complex yet crucial piece of successful ICC. The information sources that provided and supported ICC awareness were varied. The different types of awareness from the model can help us understand the explicit details of how care providers communicate and exchange information with one another. Increased understanding of ICC awareness can assist with the design and evaluation of HISs to support collaborative activities. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

78 FR 25710 - Applications for New Awards; Strengthening Institutions Program (SIP)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-02

... priority in this notice: Carefully matched comparison group design means a type of quasi- experimental... notice). More specifically, it is a design in which project participants are matched with non... group study. When designing their study, applicants should consider participant characteristics relevant...

A systematic review of interventions to improve outcomes for young adults with Type 1 diabetes.

PubMed

O'Hara, M C; Hynes, L; O'Donnell, M; Nery, N; Byrne, M; Heller, S R; Dinneen, S F

2017-06-01

Many young adults with Type 1 diabetes experience poor outcomes. The aim of this systematic review was to synthesize the evidence regarding the effectiveness of interventions aimed at improving clinical, behavioural or psychosocial outcomes for young adults with Type 1 diabetes. Electronic databases were searched. Any intervention studies related to education, support, behaviour change or health service organizational change for young adults aged between 15-30 years with Type 1 diabetes were included. A narrative synthesis of all studies was undertaken due to the large degree of heterogeneity between studies. Eighteen studies (of a possible 1700) were selected and categorized: Health Services Delivery (n = 4), Group Education and Peer Support (n = 6), Digital Platforms (n = 4) and Diabetes Devices (n = 4). Study designs included one randomized controlled trial, three retrospective studies, seven feasibility/acceptability studies and eight studies with a pre/post design. Continuity, support, education and tailoring of interventions to young adults were the most common themes across studies. HbA 1c was the most frequently measured outcome, but only 5 of 12 studies that measured it showed a significant improvement. Based on the heterogeneity among the studies, the effectiveness of interventions on clinical, behavioural and psychosocial outcomes among young adults is inconclusive. This review has highlighted a lack of high-quality, well-designed interventions, aimed at improving health outcomes for young adults with Type 1 diabetes. © 2016 The Authors. Diabetic Medicine published by John Wiley & Sons Ltd on behalf of Diabetes UK.

Small Learning Communities Sense of Belonging to Reach At-Risk Students of Promise

ERIC Educational Resources Information Center

Hackney, Debbie

2011-01-01

The research design is a quantitative causal comparative method. The Florida Comprehensive Assessment Test (FCAT) which measures student scores included assessments in mathematics and reading. The design study called for an examination of how type of small learning community (SLC) or the type non-SLC high school environment affected student…

78 FR 57171 - Experimental Removal of Barred Owls To Benefit Threatened Northern Spotted Owls; Record of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-17

... action alternatives vary by the number and location of study areas, the type of experimental design... nonlethal), and the type of experimental design (demography vs. occupancy). All action alternatives are...-FF01E00000] Experimental Removal of Barred Owls To Benefit Threatened Northern Spotted Owls; Record of...

Measuring Personality Types of Secondary Pre-Service Teachers.

ERIC Educational Resources Information Center

Mittag, Kathleen Cage; Agnello, Mary Frances

This study surveyed the personality types, as measured by the Personal Preferences Self-Descriptive Questionnaire (PPSDQ), of 226 preservice secondary teachers at a large, urban, public university. The study was designed to determine whether certain personality types gravitated to the teaching profession in secondary schools and to compare the…

Age 60 Study. Part 1. Bibliographic Database

DTIC Science & Technology

1994-10-01

seven of these aircraft types participated in a spectacle design study. Experimental spectacles were designed for each pilot and evaluated for...observation flight administered by observers who were uninformed of the details of the experimental design . Students and instructors also completed a critique...intraindividual lability in field-dependence-field independence, and (4) various measurement, sampling, and experimental design concerns associated

Study on photovoltaic power system on ships

DOE Office of Scientific and Technical Information (OSTI.GOV)

Katagi, Takeshi; Fujii, Yoshimi; Nishikawa, Eiichi

1995-11-01

This paper presents the application of photovoltaic power systems to ships. Two types of leisure or fishing boats powered by photovoltaics are designed. The boats described are single hull and catamaran type with twin hulls. The design of a new electric power system using a photovoltaic power system in a harbor ship having 20 tons is also proposed. The results of this study show that the photovoltaic power system can apply to small ships.

Development of system design information for carbon dioxide using an amine type sorber

NASA Technical Reports Server (NTRS)

Rankin, R. L.; Roehlich, F.; Vancheri, F.

1971-01-01

Development work on system design information for amine type carbon dioxide sorber is reported. Amberlite IR-45, an aminated styrene divinyl benzene matrix, was investigated to determine the influence of design parameters of sorber particle size, process flow rate, CO2 partial pressure, total pressure, and bed designs. CO2 capacity and energy requirements for a 4-man size system were related mathematically to important operational parameters. Some fundamental studies in CO2 sorber capacity, energy requirements, and process operation were also performed.

Examining Development of Curriculum Knowledge of Prospective Mathematics Teachers

ERIC Educational Resources Information Center

Sahin, Ömer; Soylu, Yasin

2017-01-01

Explanatory-confirmatory research design, one of the mixed methods research designs, was used in this study to investigate Curriculum Knowledge developments of prospective teachers regarding algebra. Cross-sectional study method, as a type of descriptive research and one of the non-experimental research designs, was used to collect quantitative…

Development of toroid-type HTS DC reactor series for HVDC system

NASA Astrophysics Data System (ADS)

Kim, Kwangmin; Go, Byeong-Soo; Park, Hea-chul; Kim, Sung-kyu; Kim, Seokho; Lee, Sangjin; Oh, Yunsang; Park, Minwon; Yu, In-Keun

2015-11-01

This paper describes design specifications and performance of a toroid-type high-temperature superconducting (HTS) DC reactor. The first phase operation targets of the HTS DC reactor were 400 mH and 400 A. The authors have developed a real HTS DC reactor system during the last three years. The HTS DC reactor was designed using 2G GdBCO HTS wires. The HTS coils of the toroid-type DC reactor magnet were made in the form of a D-shape. The electromagnetic performance of the toroid-type HTS DC reactor magnet was analyzed using the finite element method program. A conduction cooling method was adopted for reactor magnet cooling. The total system has been successfully developed and tested in connection with LCC type HVDC system. Now, the authors are studying a 400 mH, kA class toroid-type HTS DC reactor for the next phase research. The 1500 A class DC reactor system was designed using layered 13 mm GdBCO 2G HTS wire. The expected operating temperature is under 30 K. These fundamental data obtained through both works will usefully be applied to design a real toroid-type HTS DC reactor for grid application.

Preliminary design study for an atomospheric science facility

NASA Technical Reports Server (NTRS)

Hutchison, R.

1972-01-01

The activities and results of the Atmospheric Science Facility preliminary design study are reported. The objectives of the study were to define the scientific goals, to determine the range of experiment types, and to develop the preliminary instrument design requirements for a reusable, general purpose, optical research facility for investigating the earth's atmosphere from a space shuttle orbital vehicle.

Is gender still a predisposing factor in contrast-media associated adverse drug reactions? A systematic review and meta-analysis of randomized trials and observational studies.

PubMed

Lee, Heeyoung; Song, Seungyeon; Oh, Yun-Kyoung; Kang, WonKu; Kim, Eunyoung

2017-04-01

To evaluate the role of gender as a risk factor for developing contrast media-associated adverse drug reactions (CM-ADRs) by comparing the incidence of CM-ADR between male and female patients according to study design, ADR type, and computed tomography (CT) examination. We systematically searched three electronic databases for eligible studies. In the studies included (n=18), we assessed effect estimates of the relative incidence of CM-ADR, analysed by experimental design, ADR type and CT examination. This was calculated by using a random effects model if clinical conditions showed heterogeneity; otherwise, a fixed effects model was used. We identified 10,776 patients administered CM. According to the designs, studies were classified into randomised controlled trials (RCTs) and observational studies. Results were as follows: risk ratio (RR)=1.07 (95% confidence interval (CI): 0.79-1.46, P=0.66) for RCTs, and RR=0.77 (95% CI: 0.58-1.04, P=0.09) for observational studies. The results of analysis according to ADR type and for undergoing CT demonstrated that the incidence of CM-ADR did not differ between males and females. We found no significant difference in the incidence of CM-ADRs between male and female patients according to study design, ADR type, or CT examination. Future studies to determine why gender has shown different roles as a risk factor between CM-ADRs and non-CM ADRs are needed. Copyright © 2017 Elsevier B.V. All rights reserved.

Improved Lunar Lander Handling Qualities Through Control Response Type and Display Enhancements

NASA Technical Reports Server (NTRS)

Mueller, Eric Richard; Bilimoria, Karl D.; Frost, Chad Ritchie

2010-01-01

A piloted simulation that studied the handling qualities for a precision lunar landing task from final approach to touchdown is presented. A vehicle model based on NASA's Altair Lunar Lander was used to explore the design space around the nominal vehicle configuration to determine which combination of factors provides satisfactory pilot-vehicle performance and workload; details of the control and propulsion systems not available for that vehicle were derived from Apollo Lunar Module data. The experiment was conducted on a large motion base simulator. Eight Space Shuttle and Apollo pilot astronauts and three NASA test pilots served as evaluation pilots, providing Cooper-Harper ratings, Task Load Index ratings and qualitative comments. Each pilot flew seven combinations of control response types and three sets of displays, including two varieties of guidance and a nonguided approach. The response types included Rate Command with Attitude Hold, which was used in the original Apollo Moon landings, a Velocity Increment Command response type designed for up-and-away flight, three response types designed specifically for the vertical descent portion of the trajectory, and combinations of these. It was found that Velocity Increment Command significantly improved handling qualities when compared with the baseline Apollo design, receiving predominantly Level 1 ratings. This response type could be flown with or without explicit guidance cues, something that was very difficult with the baseline design, and resulted in approximately equivalent touchdown accuracies and propellant burn as the baseline response type. The response types designed to be used exclusively in the vertical descent portion of the trajectory did not improve handling qualities.

76 FR 27637 - Supplemental Priorities for Discretionary Grant Programs

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-12

.... Interrupted time series design means a type of quasi-experimental study (as defined in this notice) in which... design is an adaptation of an interrupted time series design that relies on the comparison of treatment... notice), interrupted time series designs (as defined in this notice), or regression discontinuity designs...

Development of Improved Composite Pressure Vessels for Hydrogen Storage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Newhouse, Norman L.

2016-04-29

Hexagon Lincoln started this DOE project as part of the Hydrogen Storage Engineering Center of Excellence (HSECoE) contract on 1 February 2009. The purpose of the HSECoE was the research and development of viable material based hydrogen storage systems for on-board vehicular applications to meet DOE performance and cost targets. A baseline design was established in Phase 1. Studies were then conducted to evaluate potential improvements, such as alternate fiber, resin, and boss materials. The most promising concepts were selected such that potential improvements, compared with the baseline Hexagon Lincoln tank, resulted in a projected weight reduction of 11 percent,more » volume increase of 4 percent, and cost reduction of 10 percent. The baseline design was updated in Phase 2 to reflect design improvements and changes in operating conditions specified by HSECoE Partners. Evaluation of potential improvements continued during Phase 2. Subscale prototype cylinders were designed and fabricated for HSECoE Partners’ use in demonstrating their components and systems. Risk mitigation studies were conducted in Phase 3 that focused on damage tolerance of the composite reinforcement. Updated subscale prototype cylinders were designed and manufactured to better address the HSECoE Partners’ requirements for system demonstration. Subscale Type 1, Type 3, and Type 4 tanks were designed, fabricated and tested. Laboratory tests were conducted to evaluate vacuum insulated systems for cooling the tanks during fill, and maintaining low temperatures during service. Full scale designs were prepared based on results from the studies of this program. The operating conditions that developed during the program addressed adsorbent systems operating at cold temperatures. A Type 4 tank would provide the lowest cost and lightest weight, particularly at higher pressures, as long as issues with liner compatibility and damage tolerance could be resolved. A Type 1 tank might be the choice if the liner and damage tolerance issues were not resolved, particularly if the operating pressure was reduced.« less

Angle to grain strength of dowel-type fasteners

Treesearch

Lawrence A. Soltis; Suparman Karnasudirdja; James K. Little

1987-01-01

Timber structures require adequate connections between components. Connection design is based on the performance criterion of a single fastener. This study is part of a research effort by the Forest Products Laboratory to establish a common basis design criteria for lateral strength of dowel-type fasteners that includes nails, screws, lag screws, and bolts. A general...

School Types, Facilities and Academic Performance of Students in Senior Secondary Schools in Ondo State, Nigeria

ERIC Educational Resources Information Center

Alimi, Olatunji Sabitu; Ehinola, Gabriel Babatunde; Alabi, Festus Oluwole

2012-01-01

The study investigated the influence of school types and facilities on students' academic performance in Ondo State. It was designed to find out whether facilities and students' academic performance are related in private and public secondary schools respectively. Descriptive survey design was used. Proportionate random sampling technique was used…

Polymer dispensing and embossing technology for the lens type LED packaging

NASA Astrophysics Data System (ADS)

Chien, Chien-Lin Chang; Huang, Yu-Che; Hu, Syue-Fong; Chang, Chung-Min; Yip, Ming-Chuen; Fang, Weileun

2013-06-01

This study presents a ring-type micro-structure design on the substrate and its corresponding micro fabrication processes for a lens-type light-emitting diode (LED) package. The dome-type or crater-type silicone lenses are achieved by a dispensing and embossing process rather than a molding process. Silicone with a high viscosity and thixotropy index is used as the encapsulant material. The ring-type micro structure is adopted to confine the dispensed silicone encapsulant so as to form the packaged lens. With the architecture and process described, this LED package technology herein has three merits: (1) the flexibility of lens-type LED package designs is enhanced; (2) a dome-type package design is used to enhance the intensity; (3) a crater-type package design is used to enhance the view angle. Measurement results show the ratio between the lens height and lens radius can vary from 0.4 to 1 by changing the volume of dispensed silicone. The view angles of dome-type and crater-type packages can reach 155° ± 5° and 175° ± 5°, respectively. As compared with the commercial plastic leaded chip carrier-type package, the luminous flux of a monochromatic blue light LED is improved by 15% by the dome-type package (improved by 7% by the crater-type package) and the luminous flux of a white light LED is improved by 25% by the dome-type package (improved by 13% by the crater-type package). The luminous flux of monochromatic blue light LED and white light LED are respectively improved by 8% and 12% by the dome-type package as compare with the crater-type package.

Effect of Jig Design and Assessment of Stress Distribution in Testing Metal-Ceramic Adhesion.

PubMed

Özcan, Mutlu; Kojima, Alberto Noriyuki; Nishioka, Renato Sussumu; Mesquita, Alfredo Mikail Melo; Bottino, Marco Antonio; Filho, Gilberto Duarte

2016-12-01

In testing adhesion using shear bond test, a combination of shear and tensile forces occur at the interface, resulting in complex stresses. The jig designs used for this kind of test show variations in published studies, complicating direct comparison between studies. This study evaluated the effect of different jig designs on metal-ceramic bond strength and assessed the stress distribution at the interface using finite element analysis (FEA). Metal-ceramic (Metal: Ni-Cr, Wiron 99, Bego; Ceramic: Vita Omega 900, Vita) specimens (N = 36) (diameter: 4 mm, veneer thickness: 4 mm; base diameter: 5 mm, thickness: 1 mm) were fabricated and randomly divided into three groups (n = 12 per group) to be tested using one of the following jig designs: (a) chisel (CH) (ISO 11405), (b) steel strip (SS), (c) piston (PI). Metal-ceramic interfaces were loaded under shear until debonding in a universal testing machine (0.5 mm/min). Failure types were evaluated using scanning electron microscopy (SEM). FEA was used to study the stress distribution using different jigs. Metal-ceramic bond strength data (MPa) were analyzed using ANOVA and Tukey's tests (α = 0.05). The jig type significantly affected the bond results (p = 0.0001). PI type of jig presented the highest results (MPa) (p < 0.05) (58.2 ± 14.8), followed by CH (38.7 ± 7.6) and SS jig type (23.3 ± 4.2) (p < 0.05). Failure types were exclusively a combination of cohesive failure in the opaque ceramic and adhesive interface failure. FEA analysis indicated that the SS jig presented slightly more stress formation than with the CH jig. The PI jig presented small stress concentration with more homogeneous force distribution compared to the CH jig where the stress concentrated in the area where the force was applied. Metal-ceramic bond strength was affected by the jig design. Accordingly, the results of in vitro studies on metal-ceramic adhesion should be evaluated with caution. When adhesion of ceramic materials to metals is evaluated in in vitro studies, it should be noted that the loading jig type affects the results. Clinical observations should report on the location and type of ceramic fractures in metal-ceramic reconstructions so that the most relevant test method can be identified. © 2015 by the American College of Prosthodontists.

40 CFR 35.2005 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... economic investigations or studies, surveys, designs, plans, working drawings, specifications, procedures... design-type projects within the scope of the practice of architecture or professional engineering as... as designed. (10) Collector sewer. The common lateral sewers, within a publicly owned treatment...

40 CFR 35.2005 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... economic investigations or studies, surveys, designs, plans, working drawings, specifications, procedures... design-type projects within the scope of the practice of architecture or professional engineering as... as designed. (10) Collector sewer. The common lateral sewers, within a publicly owned treatment...

14 CFR 21.31 - Type design.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Type design. 21.31 Section 21.31... PROCEDURES FOR PRODUCTS AND PARTS Type Certificates § 21.31 Type design. The type design consists of— (a) The... configuration and the design features of the product shown to comply with the requirements of that part of this...

A multioutput LLC-type parallel resonant converter

NASA Astrophysics Data System (ADS)

Liu, Rui; Lee, C. Q.; Upadhyay, Anand K.

1992-07-01

When an LLC-type parallel resonant converter (LLC-PRC) operates above resonant frequency, the switching transistors can be turned off at zero voltage. Further study reveals that the LLC-PRC possesses the advantage of lower converter voltage gain as compared with the conventional PRC. Based on analytic results, a complete set of design curves is obtained, from which a systematic design procedure is developed. Experimental results from a 150 W 150 kHz multioutput LLC-type PRC power supply are presented.

Methodology Series Module 1: Cohort Studies

PubMed Central

Setia, Maninder Singh

2016-01-01

Cohort design is a type of nonexperimental or observational study design. In a cohort study, the participants do not have the outcome of interest to begin with. They are selected based on the exposure status of the individual. They are then followed over time to evaluate for the occurrence of the outcome of interest. Some examples of cohort studies are (1) Framingham Cohort study, (2) Swiss HIV Cohort study, and (3) The Danish Cohort study of psoriasis and depression. These studies may be prospective, retrospective, or a combination of both of these types. Since at the time of entry into the cohort study, the individuals do not have outcome, the temporality between exposure and outcome is well defined in a cohort design. If the exposure is rare, then a cohort design is an efficient method to study the relation between exposure and outcomes. A retrospective cohort study can be completed fast and is relatively inexpensive compared with a prospective cohort study. Follow-up of the study participants is very important in a cohort study, and losses are an important source of bias in these types of studies. These studies are used to estimate the cumulative incidence and incidence rate. One of the main strengths of a cohort study is the longitudinal nature of the data. Some of the variables in the data will be time-varying and some may be time independent. Thus, advanced modeling techniques (such as fixed and random effects models) are useful in analysis of these studies. PMID:26955090

Methodology Series Module 1: Cohort Studies.

PubMed

Setia, Maninder Singh

2016-01-01

Cohort design is a type of nonexperimental or observational study design. In a cohort study, the participants do not have the outcome of interest to begin with. They are selected based on the exposure status of the individual. They are then followed over time to evaluate for the occurrence of the outcome of interest. Some examples of cohort studies are (1) Framingham Cohort study, (2) Swiss HIV Cohort study, and (3) The Danish Cohort study of psoriasis and depression. These studies may be prospective, retrospective, or a combination of both of these types. Since at the time of entry into the cohort study, the individuals do not have outcome, the temporality between exposure and outcome is well defined in a cohort design. If the exposure is rare, then a cohort design is an efficient method to study the relation between exposure and outcomes. A retrospective cohort study can be completed fast and is relatively inexpensive compared with a prospective cohort study. Follow-up of the study participants is very important in a cohort study, and losses are an important source of bias in these types of studies. These studies are used to estimate the cumulative incidence and incidence rate. One of the main strengths of a cohort study is the longitudinal nature of the data. Some of the variables in the data will be time-varying and some may be time independent. Thus, advanced modeling techniques (such as fixed and random effects models) are useful in analysis of these studies.

SSDOnt: An Ontology for Representing Single-Subject Design Studies.

PubMed

Berges, Idoia; Bermúdez, Jesus; Illarramendi, Arantza

2018-02-01

Single-Subject Design is used in several areas such as education and biomedicine. However, no suited formal vocabulary exists for annotating the detailed configuration and the results of this type of research studies with the appropriate granularity for looking for information about them. Therefore, the search for those study designs relies heavily on a syntactical search on the abstract, keywords or full text of the publications about the study, which entails some limitations. To present SSDOnt, a specific purpose ontology for describing and annotating single-subject design studies, so that complex questions can be asked about them afterwards. The ontology was developed following the NeOn methodology. Once the requirements of the ontology were defined, a formal model was described in a Description Logic and later implemented in the ontology language OWL 2 DL. We show how the ontology provides a reference model with a suitable terminology for the annotation and searching of single-subject design studies and their main components, such as the phases, the intervention types, the outcomes and the results. Some mappings with terms of related ontologies have been established. We show as proof-of-concept that classes in the ontology can be easily extended to annotate more precise information about specific interventions and outcomes such as those related to autism. Moreover, we provide examples of some types of queries that can be posed to the ontology. SSDOnt has achieved the purpose of covering the descriptions of the domain of single-subject research studies. Schattauer GmbH.

Rapid-Scanning Fourier Transform Spectrometer for Studies of Propagation of Near-Millimeter-Wave Radiation through Clear Air and Fog.

DTIC Science & Technology

1988-03-01

parallel in the output beam . ’ , However, as will be seen, this function can be performed by auxiliary, non -moving mirrors. Our . design for a rapid... splitter used in our design is shown in Fig. 2. The mirror drive is somewhat novel for this type of interferometer in that one mirror in each beam . M3...features: * High interferometric efficiency, due to the Martin-Puplett type design 0 Ruggedness in photolithographically produced beam splitters

76 FR 32171 - Applications for New Awards; Investing in Innovation Fund

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-03

... conflict of interest. Interrupted time series design \\5\\ means a type of quasi- experimental study in... single case design is an adaptation of an interrupted time series design that relies on the comparison of...), interrupted time series designs (as defined in this notice), or regression discontinuity designs (as defined...

76 FR 32159 - Applications for New Awards; Investing in Innovation Fund

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-03

... conflict of interest. Interrupted time series design \\5\\ means a type of quasi- experimental study in which... design is an adaptation of an interrupted time series design that relies on the comparison of treatment...), interrupted time series designs (as defined in this notice), or regression discontinuity designs (as defined...

Kinematic design considerations for minimally invasive surgical robots: an overview.

PubMed

Kuo, Chin-Hsing; Dai, Jian S; Dasgupta, Prokar

2012-06-01

Kinematic design is a predominant phase in the design of robotic manipulators for minimally invasive surgery (MIS). However, an extensive overview of the kinematic design issues for MIS robots is not yet available to both mechanisms and robotics communities. Hundreds of archival reports and articles on robotic systems for MIS are reviewed and studied. In particular, the kinematic design considerations and mechanism development described in the literature for existing robots are focused on. The general kinematic design goals, design requirements, and design preferences for MIS robots are defined. An MIS-specialized mechanism, namely the remote center-of-motion (RCM) mechanism, is revisited and studied. Accordingly, based on the RCM mechanism types, a classification for MIS robots is provided. A comparison between eight different RCM types is given. Finally, several open challenges for the kinematic design of MIS robotic manipulators are discussed. This work provides a detailed survey of the kinematic design of MIS robots, addresses the research opportunity in MIS robots for kinematicians, and clarifies the kinematic point of view to MIS robots as a reference for the medical community. Copyright © 2012 John Wiley & Sons, Ltd.

40 CFR 35.6015 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... inspections), support agency, remedial investigation/feasibility studies, remedial design, remedial action.../E) services. Consultation, investigations, reports, or services for design-type projects within the... the course of a response. It is designed to provide for two-way communication between the affected...

40 CFR 35.6015 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... inspections), support agency, remedial investigation/feasibility studies, remedial design, remedial action.../E) services. Consultation, investigations, reports, or services for design-type projects within the... the course of a response. It is designed to provide for two-way communication between the affected...

Design considerations for remotely piloted, high-altitude airplanes powered by microwave energy

NASA Technical Reports Server (NTRS)

Morris, C. E. K., Jr.

1984-01-01

Several types of systems have been considered in a design study of unmanned, microwave-powered, long-endurance, high-altitude airplanes. The study includes vehicles that use power from a continuously transmitted beam and other aircraft that receive intermittent power during cycles of boost-glide flight. Simple design algorithms are presented. Examples of sizing and performance analyses are used to suggest design-procedure guidelines.

Methodology Series Module 3: Cross-sectional Studies.

PubMed

Setia, Maninder Singh

2016-01-01

Cross-sectional study design is a type of observational study design. In a cross-sectional study, the investigator measures the outcome and the exposures in the study participants at the same time. Unlike in case-control studies (participants selected based on the outcome status) or cohort studies (participants selected based on the exposure status), the participants in a cross-sectional study are just selected based on the inclusion and exclusion criteria set for the study. Once the participants have been selected for the study, the investigator follows the study to assess the exposure and the outcomes. Cross-sectional designs are used for population-based surveys and to assess the prevalence of diseases in clinic-based samples. These studies can usually be conducted relatively faster and are inexpensive. They may be conducted either before planning a cohort study or a baseline in a cohort study. These types of designs will give us information about the prevalence of outcomes or exposures; this information will be useful for designing the cohort study. However, since this is a 1-time measurement of exposure and outcome, it is difficult to derive causal relationships from cross-sectional analysis. We can estimate the prevalence of disease in cross-sectional studies. Furthermore, we will also be able to estimate the odds ratios to study the association between exposure and the outcomes in this design.

Methodology Series Module 3: Cross-sectional Studies

PubMed Central

Setia, Maninder Singh

2016-01-01

Cross-sectional study design is a type of observational study design. In a cross-sectional study, the investigator measures the outcome and the exposures in the study participants at the same time. Unlike in case–control studies (participants selected based on the outcome status) or cohort studies (participants selected based on the exposure status), the participants in a cross-sectional study are just selected based on the inclusion and exclusion criteria set for the study. Once the participants have been selected for the study, the investigator follows the study to assess the exposure and the outcomes. Cross-sectional designs are used for population-based surveys and to assess the prevalence of diseases in clinic-based samples. These studies can usually be conducted relatively faster and are inexpensive. They may be conducted either before planning a cohort study or a baseline in a cohort study. These types of designs will give us information about the prevalence of outcomes or exposures; this information will be useful for designing the cohort study. However, since this is a 1-time measurement of exposure and outcome, it is difficult to derive causal relationships from cross-sectional analysis. We can estimate the prevalence of disease in cross-sectional studies. Furthermore, we will also be able to estimate the odds ratios to study the association between exposure and the outcomes in this design. PMID:27293245

Engineering report. Part 2: NASA wheel and brake material tradeoff study for space shuttle type environmental requirements

NASA Technical Reports Server (NTRS)

Bok, L. D.

1973-01-01

The study included material selection and trade-off for the structural components of the wheel and brake optimizing weight vs cost and feasibility for the space shuttle type application. Analytical methods were used to determine section thickness for various materials, and a table was constructed showing weight vs. cost trade-off. The wheel and brake were further optimized by considering design philosophies that deviate from standard aircraft specifications, and designs that best utilize the materials being considered.

Meta-Analysis and the Solomon Four-Group Design.

ERIC Educational Resources Information Center

Sawilowsky, Shlomo; And Others

1994-01-01

A Monte Carlo study considers the use of meta analysis with the Solomon four-group design. Experiment-wise Type I error properties and the relative power properties of Stouffer's Z in the Solomon four-group design are explored. Obstacles to conducting meta analysis in the Solomon design are discussed. (SLD)

Evaluation of a School Building in Turkey According to the Basic Sustainable Design Criteria

NASA Astrophysics Data System (ADS)

Arslan, H. D.

2017-08-01

In Turkey, as well as many other developing countries, the significance of sustainable education buildings has only recently become recognized and the issue of sustainability issue has not been sufficiently involved in laws and regulations. In this study, first of all architectural sustainability with basic design criteria has been explained. After that selected type primary school project in Turkey has been evaluated according to the sustainable design criteria. Type project of school buildings significantly limits the sustainability performance expected from buildings. It is clear that type projects shorten the planning time as they include a designing process that is independent of settlement and they are repeated in various places with different characteristics, indeed. On the other hand; abundance of disadvantages such as the overlook of the natural physical and structural properties of the location mostly restricts the sustainable design of the building. For sustainable buildings, several factors such as the environment, land, climate, insolation, direction etc. shall be taken into consideration at the beginning stage. Therefore; implementation of type projects can be deemed to be inappropriate for sustainability.

A design study of hydrazine and biowaste resistojets

NASA Technical Reports Server (NTRS)

Page, R. J.; Stoner, W. A.; Barker, L.

1986-01-01

A generalized modeling program was adapted in BASIC on a personal computer to compare the performance of four types of biowaste resistojets and two types of hydrazine augmenters. Analyzed biowaste design types were: (1) an electrically conductive ceramic heater-exchanger of zirconia; (2) a truss heater of platinum in cross flow; (3) an immersed bicoiled tubular heater-exchanger; and (4) a nonexposed, refractory metal, radiant heater in a central cavity within a heat exchanger case. Concepts 2 and 3 are designed to have an efficient, stainless steel outer pressure case. The hydrazine design types are: (5) an immersed bicoil heater exchanger and (6) a nonexposed radiant heater now with a refractory metal case. The ceramic biowaste resistojet has the highest specific impulse growth potential at 2000 K of 192.5 (CO2) and 269 s (H2O). The bicoil produces the highest augmenter temperature of 1994 K for a 2073 K heater giving 317 s at .73 overall efficiency. Detailed temperature profiles of each of the designs are shown. The scaled layout drawings of each are presented with recommended materials and fabrication methods.

76 FR 32008 - 30-Day Notice of Proposed Information Collections: RPPR Public Diplomacy Surveys

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-02

... include a survey and a focus group of participants designed to study how Internet users use different...)--Public Diplomacy Participants Study. OMB Control Number: None. Type of Request: New Collection...-Participants Study. OMB Control Number: None. Type of Request: New Collection. Originating Office: Office of...

Supporting Pre-Service Teachers in Designing Technology-Infused Lesson Plans

ERIC Educational Resources Information Center

Janssen, N.; Lazonder, A. W.

2016-01-01

The present study compared the effectiveness of two types of just-in-time support for lesson planning. Both types contained the same technological information but differed regarding pedagogical and content information. The first type presented this information separately (i.e., separate support); the second type presented this information in an…

Feasibility study of a synthesis procedure for array feeds to improve radiation performance of large distorted reflector antennas

NASA Technical Reports Server (NTRS)

Stutzman, W. L.; Takamizawa, K.; Werntz, P.; Lapean, J.; Barts, R.; Shen, B.; Dunn, D.

1992-01-01

The topics covered include the following: (1) performance analysis of the Gregorian tri-reflector; (2) design and performance of the type 6 reflector antenna; (3) a new spherical main reflector system design; (4) optimization of reflector configurations using physical optics; (5) radiometric array design; and (7) beam efficiency studies.

Toward Understanding the Cognitive Processes of Software Design in Novice Programmers

ERIC Educational Resources Information Center

Yeh, Kuo-Chuan

2009-01-01

This study provides insights with regard to the types of cognitive processes that are involved in the formation of mental models and the way those models change over the course of a semester in novice programmers doing a design task. Eight novice programmers participated in this study for three distinct software design sessions, using the same…

Masked Visual Analysis: Minimizing Type I Error in Visually Guided Single-Case Design for Communication Disorders

ERIC Educational Resources Information Center

Byun, Tara McAllister; Hitchcock, Elaine R.; Ferron, John

2017-01-01

Purpose: Single-case experimental designs are widely used to study interventions for communication disorders. Traditionally, single-case experiments follow a response-guided approach, where design decisions during the study are based on participants' observed patterns of behavior. However, this approach has been criticized for its high rate of…

Development of an algorithm to provide awareness in choosing study designs for inclusion in systematic reviews of healthcare interventions: a method study

PubMed Central

Peinemann, Frank; Kleijnen, Jos

2015-01-01

Objectives To develop an algorithm that aims to provide guidance and awareness for choosing multiple study designs in systematic reviews of healthcare interventions. Design Method study: (1) To summarise the literature base on the topic. (2) To apply the integration of various study types in systematic reviews. (3) To devise decision points and outline a pragmatic decision tree. (4) To check the plausibility of the algorithm by backtracking its pathways in four systematic reviews. Results (1) The results of our systematic review of the published literature have already been published. (2) We recaptured the experience from our four previously conducted systematic reviews that required the integration of various study types. (3) We chose length of follow-up (long, short), frequency of events (rare, frequent) and types of outcome as decision points (death, disease, discomfort, disability, dissatisfaction) and aligned the study design labels according to the Cochrane Handbook. We also considered practical or ethical concerns, and the problem of unavailable high-quality evidence. While applying the algorithm, disease-specific circumstances and aims of interventions should be considered. (4) We confirmed the plausibility of the pathways of the algorithm. Conclusions We propose that the algorithm can assist to bring seminal features of a systematic review with multiple study designs to the attention of anyone who is planning to conduct a systematic review. It aims to increase awareness and we think that it may reduce the time burden on review authors and may contribute to the production of a higher quality review. PMID:26289450

Motivation for Creativity in Architectural Design and Engineering Design Students: Implications for Design Education

ERIC Educational Resources Information Center

Casakin, Hernan; Kreitler, Shulamith

2010-01-01

The investigation reported here dealt with the study of motivation for creativity. The goals were to assess motivation for creativity in architectural design and engineering design students based on the Cognitive Orientation theory which defines motivation as a function of a set of belief types, themes, and groupings identified as relevant for the…

Performance of Several Combustion Chambers Designed for Aircraft Oil Engines

NASA Technical Reports Server (NTRS)

Joachim, William F; Kemper, Carlton

1928-01-01

Several investigations have been made on single-cylinder test engines to determine the performance characteristics of four types of combustion chambers designed for aircraft oil engines. Two of the combustion chambers studied were bulb-type precombustion chambers, the connecting orifice of one having been designed to produce high turbulence by tangential air flow in both the precombustion chamber and the cylinder. The other two were integral combustion chambers, one being dome-shaped and the other pent-roof shaped. The injection systems used included cam and eccentric driven fuel pumps, and diaphragm and spring-loaded fuel-injection valves. A diaphragm type maximum cylinder pressure indicator was used in part of these investigations with which the cylinder pressures were controlled to definite valves. The performance of the engines when equipped with each of the combustion chambers is discussed. The best performance for the tests reported was obtained with a bulb-type combustion chamber designed to give a high degree of turbulence within the bulb and cylinder. (author)

Lift/cruise fan V/STOL technology aircraft design definition study. Volume 2: Propulsion transmission system design

NASA Technical Reports Server (NTRS)

Obrien, W. J.

1976-01-01

Two types of lift/cruise fan technology aircraft were conceptually designed. One aircraft used turbotip fans pneumatically interconnected to three gas generators, and the other aircraft used variable pitch fans mechanically interconnected to three turboshaft engines. The components of each propulsion transmission system were analyzed and designed to the depth necessary to determine areas of risk, development methods, performance, weights and costs. The types of materials and manufacturing processes were identified to show that the designs followed a low cost approach. The lift/cruise fan thrust vectoring hoods, which are applicable to either aircraft configuration, were also evaluated to assure a low cost/low risk approach.

Planning and Designing Facilities. Facility Design and Development--Part 1

ERIC Educational Resources Information Center

Hypes, Michael G.

2006-01-01

Before one begins the planning process for a new facility, it is important to determine if there is a need for a new facility. The demand for a new facility can be drawn from increases in the number of users, the type of users, and the type of events to be conducted in the facility. A feasibility study should be conducted to analyze the legal…

Implementation of an Industrial-Based Case Study as the Basis for a Design Project in an Introduction to Mechanical Design Course

ERIC Educational Resources Information Center

Lackey, Ellen

2011-01-01

The purpose of this paper is to discuss the implementation of an industrial-based case study as the basis for a design project for the Spring 2009 Introduction to Mechanical Design Course at the University of Mississippi. Course surveys documented the lack of student exposure in classes to the types of projects typically experienced by engineers…

Social Network Type and Subjective Well-Being in a National Sample of Older Americans

ERIC Educational Resources Information Center

Litwin, Howard; Shiovitz-Ezra, Sharon

2011-01-01

Purpose: The study considers the social networks of older Americans, a population for whom there have been few studies of social network type. It also examines associations between network types and well-being indicators: loneliness, anxiety, and happiness. Design and Methods: A subsample of persons aged 65 years and older from the first wave of…

Neighborhood Design, Physical Activity, and Wellbeing: Applying the Walkability Model.

PubMed

Zuniga-Teran, Adriana A; Orr, Barron J; Gimblett, Randy H; Chalfoun, Nader V; Guertin, David P; Marsh, Stuart E

2017-01-13

Neighborhood design affects lifestyle physical activity, and ultimately human wellbeing. There are, however, a limited number of studies that examine neighborhood design types. In this research, we examine four types of neighborhood designs: traditional development, suburban development, enclosed community, and cluster housing development, and assess their level of walkability and their effects on physical activity and wellbeing. We examine significant associations through a questionnaire ( n = 486) distributed in Tucson, Arizona using the Walkability Model. Among the tested neighborhood design types, traditional development showed significant associations and the highest value for walkability, as well as for each of the two types of walking (recreation and transportation) representing physical activity. Suburban development showed significant associations and the highest mean values for mental health and wellbeing. Cluster housing showed significant associations and the highest mean value for social interactions with neighbors and for perceived safety from crime. Enclosed community did not obtain the highest means for any wellbeing benefit. The Walkability Model proved useful in identifying the walkability categories associated with physical activity and perceived crime. For example, the experience category was strongly and inversely associated with perceived crime. This study provides empirical evidence of the importance of including vegetation, particularly trees, throughout neighborhoods in order to increase physical activity and wellbeing. Likewise, the results suggest that regular maintenance is an important strategy to improve mental health and overall wellbeing in cities.

Neighborhood Design, Physical Activity, and Wellbeing: Applying the Walkability Model

PubMed Central

Zuniga-Teran, Adriana A.; Orr, Barron J.; Gimblett, Randy H.; Chalfoun, Nader V.; Guertin, David P.; Marsh, Stuart E.

2017-01-01

Neighborhood design affects lifestyle physical activity, and ultimately human wellbeing. There are, however, a limited number of studies that examine neighborhood design types. In this research, we examine four types of neighborhood designs: traditional development, suburban development, enclosed community, and cluster housing development, and assess their level of walkability and their effects on physical activity and wellbeing. We examine significant associations through a questionnaire (n = 486) distributed in Tucson, Arizona using the Walkability Model. Among the tested neighborhood design types, traditional development showed significant associations and the highest value for walkability, as well as for each of the two types of walking (recreation and transportation) representing physical activity. Suburban development showed significant associations and the highest mean values for mental health and wellbeing. Cluster housing showed significant associations and the highest mean value for social interactions with neighbors and for perceived safety from crime. Enclosed community did not obtain the highest means for any wellbeing benefit. The Walkability Model proved useful in identifying the walkability categories associated with physical activity and perceived crime. For example, the experience category was strongly and inversely associated with perceived crime. This study provides empirical evidence of the importance of including vegetation, particularly trees, throughout neighborhoods in order to increase physical activity and wellbeing. Likewise, the results suggest that regular maintenance is an important strategy to improve mental health and overall wellbeing in cities. PMID:28098785

14 CFR 21.97 - Approval of major changes in type design.

Code of Federal Regulations, 2011 CFR

2011-01-01

... necessary descriptive data for inclusion in the type design the other configurations of the same engine type... for approval of a major change in type design must— (1) Provide substantiating data and necessary descriptive data for inclusion in the type design; (2) Show that the changed product complies with the...

14 CFR 21.93 - Classification of changes in type design.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Classification of changes in type design... TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Changes to Type Certificates § 21.93 Classification of changes in type design. (a) In addition to changes in type design specified in paragraph (b) of...

Determinants and magnitudes of manual force strengths and joint moments during two-handed standing maximal horizontal pushing and pulling.

PubMed

Chow, Amy Y; Dickerson, Clark R

2016-04-01

Pushing and pulling are common occupational exertions that are increasingly associated with musculoskeletal complaints. This study focuses on the sensitivity of shoulder capacity to gender, handle height, exertion type (push or pull) and handle orientation for these tasks. All factors except for handle orientation influenced unilateral and total manual force strength (p < 0.01), with exertion type being the most influential. Interaction effects also existed between handle height and exertion type. Additionally, joint moments at the shoulders and low back were influenced by all factors studied (p < 0.01), with exertion type again being most influential. Knowledge of the relative influence of multiple factors on shoulder capacity can provide guidance regarding these factors when designing or evaluating occupational pushing and pulling tasks for a diverse population. Practitioner Summary: pushing and pulling comprise nearly half of all manual materials handling tasks. Practitioners often assess, design or modify these tasks while incorporating constraints, including manual force direction and handle interface. This study provides guidance to aid design of pushing and pulling tasks in the context of shoulder physical capacity.

Comparison Between PCI and Box Girder in BridgesPrestressed Concrete Design

NASA Astrophysics Data System (ADS)

Rahmawati, Cut; Zainuddin, Z.; Is, Syafridal; Rahim, Robbi

2018-04-01

This research is done by comparing PCI and Box Girder types of prestressed concrete design. The method used is load balance. Previous studies have just discussed the differences in terms of effectiveness and economics. In this study, the researchers want to know the design process by comparing the working forces, the resulting moment, and the losses of the prestressed. As the case in this study, the researchers used the bridge with the span of 31 meters. The tendon pulling system was conducted with post-tensioning system The analysis result showed that prestressed of the Girder box type sustained the greatest moment due to the combination of its own weight, additional dead load, lane load, and wind load of 44,029 kNm, while the biggest moment of PCI Girder was 7,556.75 KNm The Girder beam box experiences greater moment and shear force than PCI Girder. This is the effect of the weight of its own Girderboxwaslarger than PCI Girder. The losses ofprestressed style of Girderboxand PCI Girder type were 24.85% and 26.32%, respectively.Moreover, it showed that the type of Girder box is cheaper, easier, and more efficient than PCI Girder.

The Study Review Process. WWC Process Brief

ERIC Educational Resources Information Center

What Works Clearinghouse, 2017

2017-01-01

Many studies of education interventions make claims about impacts on students' outcomes. Some studies have designs that enable readers to make causal inferences about the effects of an intervention but others have designs that do not permit these types of conclusions. To help policymakers, practitioners, and others make sense of study results, the…

Isolated and modulated effects of topology and material type on the mechanical properties of additively manufactured porous biomaterials.

PubMed

Hedayati, R; Ahmadi, S M; Lietaert, K; Pouran, B; Li, Y; Weinans, H; Rans, C D; Zadpoor, A A

2018-03-01

In this study, we tried to quantify the isolated and modulated effects of topological design and material type on the mechanical properties of AM porous biomaterials. Towards this aim, we assembled a large dataset comprising the mechanical properties of AM porous biomaterials with different topological designs (i.e. different unit cell types and relative densities) and material types. Porous structures were additively manufactured from Co-Cr using a selective laser melting (SLM) machine and tested under quasi-static compression. The normalized mechanical properties obtained from those structures were compared with mechanical properties available from our previous studies for porous structures made from Ti-6Al-4V and pure titanium as well as with analytical solutions. The normalized values of elastic modulus and yield stress were found to be relatively close to each other as well as in agreement with analytical solutions regardless of material type. However, the material type was found to systematically affect the mechanical properties of AM porous biomaterials in general and the post-elastic/post-yield range (plateau stress and energy absorption capacity) in particular. To put this in perspective, topological design could cause up to 10-fold difference in the mechanical properties of AM porous biomaterials while up to 2-fold difference was observed as a consequence of changing the material type. Copyright © 2017 Elsevier Ltd. All rights reserved.

Product placement of computer games in cyberspace.

PubMed

Yang, Heng-Li; Wang, Cheng-Shu

2008-08-01

Computer games are considered an emerging media and are even regarded as an advertising channel. By a three-phase experiment, this study investigated the advertising effectiveness of computer games for different product placement forms, product types, and their combinations. As the statistical results revealed, computer games are appropriate for placement advertising. Additionally, different product types and placement forms produced different advertising effectiveness. Optimum combinations of product types and placement forms existed. An advertisement design model is proposed for use in game design environments. Some suggestions are given for advertisers and game companies respectively.

Are Financial Incentives for Lifestyle Behavior Change Informed or Inspired by Behavioral Economics? A Mapping Review.

PubMed

McGill, Bronwyn; O'Hara, Blythe J; Bauman, Adrian; Grunseit, Anne C; Phongsavan, Philayrath

2018-01-01

To identify the behavioral economics (BE) conceptual underpinnings of lifestyle financial incentive (FI) interventions. A mapping review of peer-reviewed literature was conducted by searching electronic databases. Inclusion criteria were real-world FI interventions explicitly mentioning BE, targeting individuals, or populations with lifestyle-related behavioral outcomes. Exclusion criteria were hypothetical studies, health professional focus, clinically oriented interventions. Study characteristics were tabulated according to purpose, categorization of BE concepts and FI types, design, outcome measures, study quality, and findings. Data Synthesis and Analysis: Financial incentives were categorized according to type and payment structure. Behavioral economics concepts explicitly used in the intervention design were grouped based on common patterns of thinking. The interplay between FI types, BE concepts, and outcome was assessed. Seventeen studies were identified from 1452 unique records. Analysis showed 76.5% (n = 13) of studies explicitly incorporated BE concepts. Six studies provided clear theoretical justification for the inclusion of BE. No pattern in the type of FI and BE concepts used was apparent. Not all FI interventions claiming BE inclusion did so. For interventions that explicitly included BE, the degree to which this was portrayed and woven into the design varied. This review identified BE concepts common to FI interventions, a first step in providing emergent and pragmatic information to public health and health promotion program planners.

Research Methods in Healthcare Epidemiology and Antimicrobial Stewardship-Quasi-Experimental Designs.

PubMed

Schweizer, Marin L; Braun, Barbara I; Milstone, Aaron M

2016-10-01

Quasi-experimental studies evaluate the association between an intervention and an outcome using experiments in which the intervention is not randomly assigned. Quasi-experimental studies are often used to evaluate rapid responses to outbreaks or other patient safety problems requiring prompt, nonrandomized interventions. Quasi-experimental studies can be categorized into 3 major types: interrupted time-series designs, designs with control groups, and designs without control groups. This methods paper highlights key considerations for quasi-experimental studies in healthcare epidemiology and antimicrobial stewardship, including study design and analytic approaches to avoid selection bias and other common pitfalls of quasi-experimental studies. Infect Control Hosp Epidemiol 2016;1-6.

Research Methods in Healthcare Epidemiology and Antimicrobial Stewardship – Quasi-Experimental Designs

PubMed Central

Schweizer, Marin L.; Braun, Barbara I.; Milstone, Aaron M.

2016-01-01

Quasi-experimental studies evaluate the association between an intervention and an outcome using experiments in which the intervention is not randomly assigned. Quasi-experimental studies are often used to evaluate rapid responses to outbreaks or other patient safety problems requiring prompt non-randomized interventions. Quasi-experimental studies can be categorized into three major types: interrupted time series designs, designs with control groups, and designs without control groups. This methods paper highlights key considerations for quasi-experimental studies in healthcare epidemiology and antimicrobial stewardship including study design and analytic approaches to avoid selection bias and other common pitfalls of quasi-experimental studies. PMID:27267457

Are glucose levels, glucose variability and autonomic control influenced by inspiratory muscle exercise in patients with type 2 diabetes? Study protocol for a randomized controlled trial.

PubMed

Schein, Aso; Correa, Aps; Casali, Karina Rabello; Schaan, Beatriz D

2016-01-20

Physical exercise reduces glucose levels and glucose variability in patients with type 2 diabetes. Acute inspiratory muscle exercise has been shown to reduce these parameters in a small group of patients with type 2 diabetes, but these results have yet to be confirmed in a well-designed study. The aim of this study is to investigate the effect of acute inspiratory muscle exercise on glucose levels, glucose variability, and cardiovascular autonomic function in patients with type 2 diabetes. This study will use a randomized clinical trial crossover design. A total of 14 subjects will be recruited and randomly allocated to two groups to perform acute inspiratory muscle loading at 2 % of maximal inspiratory pressure (PImax, placebo load) or 60 % of PImax (experimental load). Inspiratory muscle training could be a novel exercise modality to be used to decrease glucose levels and glucose variability. ClinicalTrials.gov NCT02292810 .

Antipsychotic drugs and risk of type 2 diabetes: an evidence-based approach.

PubMed

Bellantuono, Cesario; Tentoni, Luigi; Donda, Pietro

2004-12-01

To review studies conducted to evaluate the risk of type 2 diabetes in patients treated with different antipsychotic drugs (AP). a MEDLINE search (January 1985-February 2003) was conducted to establish the potential relationship between the exposure to AP (conventional and second generation) and the development of type 2 diabetes. Studies were classified according to their experimental design as prospective and retrospective (incidence and prevalence based). Twenty-one studies were selected: nine prospective and eleven retrospective. Patients with schizophrenia treated with different AP have an increased risk of developing type 2 diabetes compared with the general population. The data so far available, however, do not establish whether the increasing risk of developing diabetes is a function of the schizophrenia itself or is induced by the antipsychotic treatment. A number of methodological flaws in the study design and data collection do not allow conclusions to be drawn on the risk between patients treated with conventional drugs versus those treated with new ones. 2004 John Wiley & Sons, Ltd.

Dynamic Characteristics of The DSI-Type Constant-Flow Valves

NASA Astrophysics Data System (ADS)

Kang, Yuan; Hu, Sheng-Yan; Chou, Hsien-Chin; Lee, Hsing-Han

Constant flow valves have been presented in industrial applications or academic studies, which compensate recess pressures of a hydrostatic bearing to resist load fluctuating. The flow rate of constant-flow valves can be constant in spite of the pressure changes in recesses, however the design parameters must be specified. This paper analyzes the dynamic responses of DSI-type constant-flow valves that is designed as double pistons on both ends of a spool with single feedback of working pressure and regulating restriction at inlet. In this study the static analysis presents the specific relationships among design parameters for constant flow rate and the dynamic analyses give the variations around the constant flow rate as the working pressure fluctuates.

Revised Point of Departure Design Options for Nuclear Thermal Propulsion

NASA Technical Reports Server (NTRS)

Fittje, James E.; Borowski, Stanley K.; Schnitzler, Bruce

2015-01-01

In an effort to further refine potential point of departure nuclear thermal rocket engine designs, four proposed engine designs representing two thrust classes and utilizing two different fuel matrix types are designed and analyzed from both a neutronics and thermodynamic cycle perspective. Two of these nuclear rocket engine designs employ a tungsten and uranium dioxide cermet (ceramic-metal) fuel with a prismatic geometry based on the ANL-200 and the GE-710, while the other two designs utilize uranium-zirconium-carbide in a graphite composite fuel and a prismatic fuel element geometry developed during the Rover/NERVA Programs. Two engines are analyzed for each fuel type, a small criticality limited design and a 111 kN (25 klbf) thrust class engine design, which has been the focus of numerous manned mission studies, including NASA's Design Reference Architecture 5.0. slightly higher T/W ratios, but they required substantially more 235U.

Group-sequential three-arm noninferiority clinical trial designs

PubMed Central

Ochiai, Toshimitsu; Hamasaki, Toshimitsu; Evans, Scott R.; Asakura, Koko; Ohno, Yuko

2016-01-01

We discuss group-sequential three-arm noninferiority clinical trial designs that include active and placebo controls for evaluating both assay sensitivity and noninferiority. We extend two existing approaches, the fixed margin and fraction approaches, into a group-sequential setting with two decision-making frameworks. We investigate the operating characteristics including power, Type I error rate, maximum and expected sample sizes, as design factors vary. In addition, we discuss sample size recalculation and its’ impact on the power and Type I error rate via a simulation study. PMID:26892481

76 FR 32148 - Applications for New Awards; Investing in Innovation Fund

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-03

.... Interrupted time series design \\5\\ means a type of quasi- experimental study in which the outcome of interest... interrupted time series design that relies on the comparison of treatment effects on a single subject or group... matched comparison group designs (as defined in this notice), interrupted time series designs (as defined...

A standardized mean difference effect size for multiple baseline designs across individuals.

PubMed

Hedges, Larry V; Pustejovsky, James E; Shadish, William R

2013-12-01

Single-case designs are a class of research methods for evaluating treatment effects by measuring outcomes repeatedly over time while systematically introducing different condition (e.g., treatment and control) to the same individual. The designs are used across fields such as behavior analysis, clinical psychology, special education, and medicine. Emerging standards for single-case designs have focused attention on methods for summarizing and meta-analyzing findings and on the need for effect sizes indices that are comparable to those used in between-subjects designs. In the previous work, we discussed how to define and estimate an effect size that is directly comparable to the standardized mean difference often used in between-subjects research based on the data from a particular type of single-case design, the treatment reversal or (AB)(k) design. This paper extends the effect size measure to another type of single-case study, the multiple baseline design. We propose estimation methods for the effect size and its variance, study the estimators using simulation, and demonstrate the approach in two applications. Copyright © 2013 John Wiley & Sons, Ltd.

14 CFR 21.95 - Approval of minor changes in type design.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Approval of minor changes in type design... TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Changes to Type Certificates § 21.95 Approval of minor changes in type design. Minor changes in a type design may be approved under a method...

14 CFR 21.95 - Approval of minor changes in type design.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Approval of minor changes in type design... TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Changes to Type Certificates § 21.95 Approval of minor changes in type design. Minor changes in a type design may be approved under a method...

14 CFR 21.95 - Approval of minor changes in type design.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Approval of minor changes in type design... TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Changes to Type Certificates § 21.95 Approval of minor changes in type design. Minor changes in a type design may be approved under a method...

14 CFR 21.95 - Approval of minor changes in type design.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Approval of minor changes in type design... TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Changes to Type Certificates § 21.95 Approval of minor changes in type design. Minor changes in a type design may be approved under a method...

14 CFR 21.95 - Approval of minor changes in type design.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Approval of minor changes in type design... TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Changes to Type Certificates § 21.95 Approval of minor changes in type design. Minor changes in a type design may be approved under a method...

Systematic review of communication partner training in aphasia: methodological quality.

PubMed

Cherney, Leora R; Simmons-Mackie, Nina; Raymer, Anastasia; Armstrong, Elizabeth; Holland, Audrey

2013-10-01

Twenty-three studies identified from a previous systematic review examining the effects of communication partner training on persons with aphasia and their communication partners were evaluated for methodological quality. Two reviewers rated the studies on defined methodological quality criteria relevant to each study design. There were 11 group studies, seven single-subject participant design studies, and five qualitative studies. Quality scores were derived for each study. The mean inter-rater reliability of scores for each study design ranged from 85-93%, with Cohen's Kappa indicating substantial agreement between raters. Methodological quality of research on communication partner training in aphasia was highly varied. Overall, group studies employed the least rigorous methodology as compared to single subject and qualitative research. Only two of 11 group studies complied with more than half of the quality criteria. No group studies reported therapist blinding and only one group study reported participant blinding. Across all types of studies, the criterion of treatment fidelity was most commonly omitted. Failure to explicitly report certain methodological quality criteria may account for low ratings. Using methodological rating scales specific to the type of study design may help improve the methodological quality of aphasia treatment studies, including those on communication partner training.

Designing research: ex post facto designs.

PubMed

Giuffre, M

1997-06-01

The research design is the overall plan or structure of the study. The goal of a good research design is to insure internal validity and answer the question being asked. The only clear rule in selecting a design is that the question dictates the design. Over the next few issues this column will cover types of research designs and their inherent strengths and weaknesses. This article discusses ex post facto research.

Design of a factorial experiment with randomization restrictions to assess medical device performance on vascular tissue.

PubMed

Diestelkamp, Wiebke S; Krane, Carissa M; Pinnell, Margaret F

2011-05-20

Energy-based surgical scalpels are designed to efficiently transect and seal blood vessels using thermal energy to promote protein denaturation and coagulation. Assessment and design improvement of ultrasonic scalpel performance relies on both in vivo and ex vivo testing. The objective of this work was to design and implement a robust, experimental test matrix with randomization restrictions and predictive statistical power, which allowed for identification of those experimental variables that may affect the quality of the seal obtained ex vivo. The design of the experiment included three factors: temperature (two levels); the type of solution used to perfuse the artery during transection (three types); and artery type (two types) resulting in a total of twelve possible treatment combinations. Burst pressures of porcine carotid and renal arteries sealed ex vivo were assigned as the response variable. The experimental test matrix was designed and carried out as a split-plot experiment in order to assess the contributions of several variables and their interactions while accounting for randomization restrictions present in the experimental setup. The statistical software package SAS was utilized and PROC MIXED was used to account for the randomization restrictions in the split-plot design. The combination of temperature, solution, and vessel type had a statistically significant impact on seal quality. The design and implementation of a split-plot experimental test-matrix provided a mechanism for addressing the existing technical randomization restrictions of ex vivo ultrasonic scalpel performance testing, while preserving the ability to examine the potential effects of independent factors or variables. This method for generating the experimental design and the statistical analyses of the resulting data are adaptable to a wide variety of experimental problems involving large-scale tissue-based studies of medical or experimental device efficacy and performance.

Inter-observer variability in the classification of ovarian cancer cell type using microscopy: a pilot study

NASA Astrophysics Data System (ADS)

Gavrielides, Marios A.; Ronnett, Brigitte M.; Vang, Russell; Seidman, Jeffrey D.

2015-03-01

Studies have shown that different cell types of ovarian carcinoma have different molecular profiles, exhibit different behavior, and that patients could benefit from typespecific treatment. Different cell types display different histopathology features, and different criteria are used for each cell type classification. Inter-observer variability for the task of classifying ovarian cancer cell types is an under-examined area of research. This study served as a pilot study to quantify observer variability related to the classification of ovarian cancer cell types and to extract valuable data for designing a validation study of digital pathology (DP) for this task. Three observers with expertise in gynecologic pathology reviewed 114 cases of ovarian cancer with optical microscopy, with specific guidelines for classifications into distinct cell types. For 93 cases all 3 pathologists agreed on the same cell type, for 18 cases 2 out of 3 agreed, and for 3 cases there was no agreement. Across cell types with a minimum sample size of 10 cases, agreement between all three observers was {91.1%, 80.0%, 90.0%, 78.6%, 100.0%, 61.5%} for the high grade serous carcinoma, low grade serous carcinoma, endometrioid, mucinous, clear cell, and carcinosarcoma cell types respectively. These results indicate that unanimous agreement varied over a fairly wide range. However, additional research is needed to determine the importance of these differences in comparison studies. These results will be used to aid in the design and sizing of such a study comparing optical and digital pathology. In addition, the results will help in understanding the potential role computer-aided diagnosis has in helping to improve the agreement of pathologists for this task.

Genetic characterization of Toxoplasma gondii isolates from Portugal, Austria and Israel reveals higher genetic variability within the type II lineage.

PubMed

Verma, S K; Ajzenberg, D; Rivera-Sanchez, A; Su, C; Dubey, J P

2015-06-01

This study compared genetic diversity of Toxoplasma gondii isolates from Portugal, Austria and Israel. For this, we genotyped 90 T. gondii isolates (16 from Portugal, 67 from Austria and 7 from Israel) using 10 nested PCR-restriction length polymorphism (RFLP) genetic markers and 15 microsatellite (MS) markers. By PCR-RFLP typing, 7 isolates from Portugal chickens were identified as type II (ToxoDB #1 or #3), 4 were type III (ToxoDB #2) and the remaining 4 isolates have unique genotype pattern were designated as ToxoDB #254. One mouse virulent isolate from a bovine fetus (Bos taurus) in Portugal was type I (ToxoDB #10) at all loci and designated as TgCowPr1. All 67 isolates from Austria and 7 from Israel were type II (ToxoDB #1 or #3). By MS typing, many additional genetic variations were revealed among the type II and type III isolates. Phylogenetic analysis showed that isolates from the same geographical locations tend to cluster together, and there is little overlapping of genotypes among different locations. This study demonstrated that the MS markers can provide higher discriminatory power to reveal association of genotypes with geographical locations. Future studies of the type II strains in Europe by these MS markers will be useful to reveal transmission patterns of the parasite.

Comparing the appropriate geographic region for assessing built environmental correlates with walking trips using different metrics and model approaches

PubMed Central

Tribby, Calvin P.; Miller, Harvey J.; Brown, Barbara B.; Smith, Ken R.; Werner, Carol M.

2017-01-01

There is growing international evidence that supportive built environments encourage active travel such as walking. An unsettled question is the role of geographic regions for analyzing the relationship between the built environment and active travel. This paper examines the geographic region question by assessing walking trip models that use two different regions: walking activity spaces and self-defined neighborhoods. We also use two types of built environment metrics, perceived and audit data, and two types of study design, cross-sectional and longitudinal, to assess these regions. We find that the built environment associations with walking are dependent on the type of metric and the type of model. Audit measures summarized within walking activity spaces better explain walking trips compared to audit measures within self-defined neighborhoods. Perceived measures summarized within self-defined neighborhoods have mixed results. Finally, results differ based on study design. This suggests that results may not be comparable among different regions, metrics and designs; researchers need to consider carefully these choices when assessing active travel correlates. PMID:28237743

Material Development to Raise Awareness of Using Smart Boards: An Example Design and Development Research

ERIC Educational Resources Information Center

Günaydin, Serpil; Karamete, Aysen

2016-01-01

This study aims to develop training material that will help raise awareness in prospective teachers regarding the benefits of using smart boards in the classroom. In this study, a Type 2 design and development research method (DDR) was used. The material was developed by applying phases of ADDIE--an instructional systems design model. The…

Design and analysis of three-arm trials with negative binomially distributed endpoints.

PubMed

Mütze, Tobias; Munk, Axel; Friede, Tim

2016-02-20

A three-arm clinical trial design with an experimental treatment, an active control, and a placebo control, commonly referred to as the gold standard design, enables testing of non-inferiority or superiority of the experimental treatment compared with the active control. In this paper, we propose methods for designing and analyzing three-arm trials with negative binomially distributed endpoints. In particular, we develop a Wald-type test with a restricted maximum-likelihood variance estimator for testing non-inferiority or superiority. For this test, sample size and power formulas as well as optimal sample size allocations will be derived. The performance of the proposed test will be assessed in an extensive simulation study with regard to type I error rate, power, sample size, and sample size allocation. For the purpose of comparison, Wald-type statistics with a sample variance estimator and an unrestricted maximum-likelihood estimator are included in the simulation study. We found that the proposed Wald-type test with a restricted variance estimator performed well across the considered scenarios and is therefore recommended for application in clinical trials. The methods proposed are motivated and illustrated by a recent clinical trial in multiple sclerosis. The R package ThreeArmedTrials, which implements the methods discussed in this paper, is available on CRAN. Copyright © 2015 John Wiley & Sons, Ltd.

Rain fall data for the design of sewer pipe systems

NASA Astrophysics Data System (ADS)

Arnell, V.

1982-03-01

A comparison of designs of sewer pipes for different types of rainfall data is presented. Local coefficients were evaluated from an 18-year historical rainfall record for the following design storms: The Average-Intensity-Duration Design Storm, The Chicago Design Storm, The Sifalda Design Storm, The Illinois State Water Survey Design Storm, and The Flood Studies Report Design Storm. Historical rainfalls as well as the above design storms were used for the calculations of peak-flow values.

A survey of snake-inspired robot designs.

PubMed

Hopkins, James K; Spranklin, Brent W; Gupta, Satyandra K

2009-06-01

Body undulation used by snakes and the physical architecture of a snake body may offer significant benefits over typical legged or wheeled locomotion designs in certain types of scenarios. A large number of research groups have developed snake-inspired robots to exploit these benefits. The purpose of this review is to report different types of snake-inspired robot designs and categorize them based on their main characteristics. For each category, we discuss their relative advantages and disadvantages. This review will assist in familiarizing a newcomer to the field with the existing designs and their distinguishing features. We hope that by studying existing robots, future designers will be able to create new designs by adopting features from successful robots. The review also summarizes the design challenges associated with the further advancement of the field and deploying snake-inspired robots in practice.

Variables Affecting the Success of Alternative School Programs in Mississippi

ERIC Educational Resources Information Center

Haley, Sherlyn Williams

2009-01-01

This study focused on examining the effect of two alternative school types on student success in Mississippi. To determine alternative school type, alternative program directors self-reported program design, and schools were divided into two groups. Type I schools were defined as "punitive-based" programs in which students receive…

Mind the Gap: The Effect of Keyboard Key Gap and Pitch on Typing Speed, Accuracy, and Usability, Part 3.

PubMed

Madison, Heather; Pereira, Anna; Korshøj, Mette; Taylor, Laura; Barr, Alan; Rempel, David

2015-11-01

The aim of this study was to evaluate the effects of key gap (distance between edges of keys) on computer keyboards on typing speed, percentage error, preference, and usability. In Parts 1 and 2 of this series, a small key pitch (center-to-center distance between keys) was found to reduce productivity and usability, but the findings were confounded by gap. In this study, key gap was varied while holding key pitch constant. Participants (N = 25) typed on six keyboards, which differed in gap between keys (1, 3, or 5 mm) and pitch (16 or 17 mm; distance between centers of keys), while typing speed, accuracy, usability, and preference were measured. There was no statistical interaction between gap and pitch. Accuracy was better for keyboards with a gap of 5 mm compared to a 1-mm gap (p = .04). Net typing speed (p = .02), accuracy (p = .002), and most usability measures were better for keyboards with a pitch of 17 mm compared to a 16-mm pitch. The study findings support keyboard designs with a gap between keys of 5 mm over 1 mm and a key pitch of 17 mm over 16 mm. These findings may influence keyboard standards and design, especially the design of small keyboards used with portable devices, such as tablets and laptops. © 2015, Human Factors and Ergonomics Society.

First wall design of aluminum alloy R-tokamak

NASA Astrophysics Data System (ADS)

Hamada, Y.; Matsuoka, K.; Ogawa, Y.; Kitagawa, S.; Toi, K.; Yamazaki, K.; Abe, Y.; Amano, T.; Fujita, J.; Kaneko, O.; Kawahata, K.; Kuroda, T.; Matsuura, K.; Midzuno, Y.; Naitou, H.; Noda, N.; Ohkubo, K.; Oka, Y.; Sakurai, K.; Tanahashi, S.; Watari, T.

1984-05-01

A design study of a low-activation D-T tokamak Reacting Plasma Project In Nagoya has been finished. The study emphasizes the vacuum vessel and the bumper limiter. Our choice of materials (aluminum vacuum vessel, copper conductors, aluminum TF coil case and lead shield) results in a radiation level of about 1 × 10 -3 times that of a TFTR type design, and 1 × 10 -4 times that of JET type design, at 2 weeks after one D-T shot. Thick graphite tiles will be fixed directly on the aluminum vacuum vessel using aluminum spring washers and bolts. With this simplified structure of the bumper limiter, the inner surface temperature of the thick aluminum vacuum vessel will be less than 120°C which is required to reduce the overaging effect of the aluminum alloy.

Designing a Self-Management App for Young People With Type 1 Diabetes: Methodological Challenges, Experiences, and Recommendations

PubMed Central

Reventlov Husted, Gitte; Teilmann, Grete; Hommel, Eva; Olsen, Birthe Susanne; Kensing, Finn

2017-01-01

Background Young people with type 1 diabetes often struggle to self-manage their disease. Mobile health (mHealth) apps show promise in supporting self-management of chronic conditions such as type 1 diabetes. Many health care providers become involved in app development. Unfortunately, limited information is available to guide their selection of appropriate methods, techniques, and tools for a participatory design (PD) project in health care. Objective The aim of our study was to develop an mHealth app to support young people in self-managing type 1 diabetes. This paper presents our methodological recommendations based on experiences and reflections from a 2-year research study. Methods A mixed methods design was used to identify user needs before designing the app and testing it in a randomized controlled trial. App design was based on qualitative, explorative, interventional, and experimental activities within an overall iterative PD approach. Several techniques and tools were used, including workshops, a mail panel, think-aloud tests, and a feasibility study. Results The final mHealth solution was “Young with Diabetes” (YWD). The iterative PD approach supported researchers and designers in understanding the needs of end users (ie, young people, parents, and health care providers) and their assessment of YWD, as well as how to improve app usability and feasibility. It is critical to include all end user groups during all phases of a PD project and to establish a multidisciplinary team to provide the wide range of expertise required to build a usable and useful mHealth app. Conclusions Future research is needed to develop and evaluate more efficient PD techniques. Health care providers need guidance on what tools and techniques to choose for which subgroups of users and guidance on how to introduce an app to colleagues to successfully implement an mHealth app in health care organizations. These steps are important for anyone who wants to design an mHealth app for any illness. PMID:29061552

A strategy for reducing turnaround time in design optimization using a distributed computer system

NASA Technical Reports Server (NTRS)

Young, Katherine C.; Padula, Sharon L.; Rogers, James L.

1988-01-01

There is a need to explore methods for reducing lengthly computer turnaround or clock time associated with engineering design problems. Different strategies can be employed to reduce this turnaround time. One strategy is to run validated analysis software on a network of existing smaller computers so that portions of the computation can be done in parallel. This paper focuses on the implementation of this method using two types of problems. The first type is a traditional structural design optimization problem, which is characterized by a simple data flow and a complicated analysis. The second type of problem uses an existing computer program designed to study multilevel optimization techniques. This problem is characterized by complicated data flow and a simple analysis. The paper shows that distributed computing can be a viable means for reducing computational turnaround time for engineering design problems that lend themselves to decomposition. Parallel computing can be accomplished with a minimal cost in terms of hardware and software.

Double anisotropic electrically conductive flexible Janus-typed membranes.

PubMed

Li, Xiaobing; Ma, Qianli; Tian, Jiao; Xi, Xue; Li, Dan; Dong, Xiangting; Yu, Wensheng; Wang, Xinlu; Wang, Jinxian; Liu, Guixia

2017-12-07

Novel type III anisotropic conductive films (ACFs), namely flexible Janus-typed membranes, were proposed, designed and fabricated for the first time. Flexible Janus-typed membranes composed of ordered Janus nanobelts were constructed by electrospinning, which simultaneously possess fluorescence and double electrically conductive anisotropy. For the fabrication of the Janus-typed membrane, Janus nanobelts comprising a conductive side and an insulative-fluorescent side were primarily fabricated, and then the Janus nanobelts are arranged into parallel arrays using an aluminum rotary drum as the collector to obtain a single anisotropically conductive film. Subsequently, a secondary electrospinning process was applied to the as-prepared single anisotropically conductive films to acquire the final Janus-typed membrane. For this Janus-typed membrane, namely its left-to-right structure, anisotropic electrical conduction synchronously exists on both sides, and furthermore, the two electrically conductive directions are perpendicular. By modulating the amount of Eu(BA) 3 phen complex and conducting polyaniline (PANI), the characteristics and intensity of the fluorescence-electricity dual-function in the membrane can be tuned. The high integration of this peculiar Janus-typed membrane with simultaneous double electrically conductive anisotropy-fluorescent dual-functionality is successfully realized in this study. This design philosophy and preparative technique will provide support for the design and construction of new types of special nanostructures with multi-functionality.

Best practices for hybridization design in two-colour microarray analysis.

PubMed

Knapen, Dries; Vergauwen, Lucia; Laukens, Kris; Blust, Ronny

2009-07-01

Two-colour microarrays are a popular platform of choice in gene expression studies. Because two different samples are hybridized on a single microarray, and several microarrays are usually needed in a given experiment, there are many possible ways to combine samples on different microarrays. The actual combination employed is commonly referred to as the 'hybridization design'. Different types of hybridization designs have been developed, all aimed at optimizing the experimental setup for the detection of differentially expressed genes while coping with technical noise. Here, we first provide an overview of the different classes of hybridization designs, discussing their advantages and limitations, and then we illustrate the current trends in the use of different hybridization design types in contemporary research.

Comparisons between designs for single-sided linear electric motors: Homopolar synchronous and induction

NASA Astrophysics Data System (ADS)

Nondahl, T. A.; Richter, E.

1980-09-01

A design study of two types of single sided (with a passive rail) linear electric machine designs, namely homopolar linear synchronous machines (LSM's) and linear induction machines (LIM's), is described. It is assumed the machines provide tractive effort for several types of light rail vehicles and locomotives. These vehicles are wheel supported and require tractive powers ranging from 200 kW to 3735 kW and top speeds ranging from 112 km/hr to 400 km/hr. All designs are made according to specified magnetic and thermal criteria. The LSM advantages are a higher power factor, much greater restoring forces for track misalignments, and less track heating. The LIM advantages are no need to synchronize the excitation frequency precisely to vehicle speed, simpler machine construction, and a more easily anchored track structure. The relative weights of the two machine types vary with excitation frequency and speed; low frequencies and low speeds favor the LSM.

76 FR 9331 - Professional Development for Arts Educators Program; Office of Innovation and Improvement...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-17

... adaptation of an interrupted time series design that relies on the comparison of treatment effects on a... group designs (as defined in this notice), interrupted time series designs (as defined in this notice... series design means a type of quasi-experimental study (as defined in this notice) in which the outcome...

Mandated Change Gone Wrong? A Case Study of Law-Based School Reform in South Africa

ERIC Educational Resources Information Center

Bisschoff, Tom

2009-01-01

Purpose: This paper aims to explore and describe the limits of recent law-based school reform in South Africa from an education management perspective. Design/methodology/approach: The research design consists of a qualitative, investigative, descriptive and contextual design which Merriam would classify as a basic or generic design type.…

Interactive Effects of Environmental Experience and Innovative Cognitive Style on Student Creativity in Product Design

ERIC Educational Resources Information Center

Lu, Chia-Chen

2017-01-01

Environmental experience can enhance the ideas of design students. Thus, this type of experience may interfere with the influence of design students' cognitive style on creativity. The aim of this study was to examine the influence of environmental experience on the relationship between innovative cognitive style and industrial design students'…

Satisfiers and Dissatisfiers: A Two-Factor Model for Website Design and Evaluation.

ERIC Educational Resources Information Center

Zhang, Ping; von Dran, Gisela M.

2000-01-01

Investigates Web site design factors and their impact from a theoretical perspective. Presents a two-factor model that can guide Web site design and evaluation. According to the model, there are two types of design factors: hygiene and motivator. Results showed that the two-factor model provides a means for Web-user interface studies. Provides…

Social Network Types and Mental Health Among LGBT Older Adults

PubMed Central

Kim, Hyun-Jun; Fredriksen-Goldsen, Karen I.; Bryan, Amanda E. B.; Muraco, Anna

2017-01-01

Purpose of the Study: This study was designed to identify social network types among lesbian, gay, bisexual, and transgender (LGBT) older adults and examine the relationship between social network type and mental health. Design and Methods: We analyzed the 2014 survey data of LGBT adults aged 50 and older (N = 2,450) from Aging with Pride: National Health, Aging, and Sexuality/Gender Study. Latent profile analyses were conducted to identify clusters of social network ties based on 11 indicators. Multiple regression analysis was performed to examine the association between social network types and mental health. Results: We found five social network types. Ordered from greatest to least access to family, friend, and other non-family network ties, they were diverse, diverse/no children, immediate family-focused, friend-centered/restricted, and fully restricted. The friend-centered/restricted (33%) and diverse/no children network types (31%) were the most prevalent. Among individuals with the friend-centered/restricted type, access to social networks was limited to friends, and across both types children were not present. The least prevalent type was the fully restricted network type (6%). Social network type was significantly associated with mental health, after controlling for background characteristics and total social network size; those with the fully restricted type showed the poorest mental health. Implications: Unique social network types (diverse/no children and friend-centered/restricted) emerge among LGBT older adults. Moreover, individuals with fully restricted social networks are at particular risk due to heightened health needs and limited social resources. This study highlights the importance of understanding heterogeneous social relations and developing tailored interventions to promote social connectedness and mental health in LGBT older adults. PMID:28087798

Crevicular Fluid and Serum Concentrations of Progranulin and High Sensitivity CRP in Chronic Periodontitis and Type 2 Diabetes

PubMed Central

Priyanka, N.; Kumari, Minal; Kalra, Nitish; Arjun, P.; Naik, Savitha B.; Pradeep, A. R.

2013-01-01

Introduction. This study was designed to correlate the serum and gingival crevicular fluid (GCF) levels of progranulin (PGRN) and high sensitivity C-reactive protein (hs CRP) in chronic periodontitis and type 2 diabetes mellitus (DM). Design. PGRN and hs CRP levels were estimated in 3 groups: healthy, chronic periodontitis, and type 2 DM with chronic periodontitis. Results. The mean PGRN and hs CRP concentrations in serum and GCF were the highest for group 3 followed by group 2 and the least in group 1. Conclusion. PGRN and hs CRP may be biomarkers of the inflammatory response in type 2 DM and chronic periodontitis. PMID:24191130

Contact lens design with slope-constrained Q-type aspheres for myopia correction

NASA Astrophysics Data System (ADS)

Peng, Wei-Jei; Cheng, Yuan-Chieh; Hsu, Wei-Yao; Yu, Zong-Ru; Ho, Cheng-Fang; Abou-El-Hossein, Khaled

2017-08-01

The design of the rigid contact lens (CL) with slope-constrained Q-type aspheres for myopia correction is presented in this paper. The spherical CL is the most common type for myopia correction, however the spherical aberration (SA) caused from the pupil dilation in dark leads to the degradation of visual acuity which cannot be corrected by spherical surface. The spherical and aspheric CLs are designed respectively based on Liou's schematic eye model, and the criterion is the modulation transfer function (MTF) at the frequency of 100 line pair per mm, which corresponds to the normal vision of one arc-minute. After optimization, the MTF of the aspheric design is superior to that of the spherical design, because the aspheric surface corrects the SA for improving the visual acuity in dark. For avoiding the scratch caused from the contact profilometer, the aspheric surface is designed to match the measurability of the interferometer. The Q-type aspheric surface is employed to constrain the root-mean-square (rms) slope of the departure from a best-fit sphere directly, because the fringe density is limited by the interferometer. The maximum sag departure from a best-fit sphere is also controlled according to the measurability of the aspheric stitching interferometer (ASI). The inflection point is removed during optimization for measurability and appearance. In this study, the aspheric CL is successfully designed with Q-type aspheres for the measurability of the interferometer. It not only corrects the myopia but also eliminates the SA for improving the visual acuity in dark based on the schematic eye model.

Does left ventricular hypertrophy affect cognition and brain structural integrity in type 2 diabetes? Study design and rationale of the Diabetes and Dementia (D2) study.

PubMed

Patel, Sheila K; Restrepo, Carolina; Werden, Emilio; Churilov, Leonid; Ekinci, Elif I; Srivastava, Piyush M; Ramchand, Jay; Wai, Bryan; Chambers, Brian; O'Callaghan, Christopher J; Darby, David; Hachinski, Vladimir; Cumming, Toby; Donnan, Geoff; Burrell, Louise M; Brodtmann, Amy

2017-04-07

Cognitive impairment is common in type 2 diabetes mellitus, and there is a strong association between type 2 diabetes and Alzheimer's disease. However, we do not know which type 2 diabetes patients will dement or which biomarkers predict cognitive decline. Left ventricular hypertrophy (LVH) is potentially such a marker. LVH is highly prevalent in type 2 diabetes and is a strong, independent predictor of cardiovascular events. To date, no studies have investigated the association between LVH and cognitive decline in type 2 diabetes. The Diabetes and Dementia (D2) study is designed to establish whether patients with type 2 diabetes and LVH have increased rates of brain atrophy and cognitive decline. The D2 study is a single centre, observational, longitudinal case control study that will follow 168 adult patients aged >50 years with type 2 diabetes: 50% with LVH (case) and 50% without LVH (control). It will assess change in cardiovascular risk, brain imaging and neuropsychological testing between two time-points, baseline (0 months) and 24 months. The primary outcome is brain volume change at 24 months. The co-primary outcome is the presence of cognitive decline at 24 months. The secondary outcome is change in left ventricular mass associated with brain atrophy and cognitive decline at 24 months. The D2 study will test the hypothesis that patients with type 2 diabetes and LVH will exhibit greater brain atrophy than those without LVH. An understanding of whether LVH contributes to cognitive decline, and in which patients, will allow us to identify patients at particular risk. Australian New Zealand Clinical Trials Registry ( ACTRN12616000546459 ), date registered, 28/04/2016.

49 CFR 451.12 - Application for approval by design type.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 6 2013-10-01 2013-10-01 false Application for approval by design type. 451.12... Approval of New Containers § 451.12 Application for approval by design type. (a) For approval of new containers by design type, each application must include the following: (1) Engineering drawings and plans...

49 CFR 451.12 - Application for approval by design type.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 6 2014-10-01 2014-10-01 false Application for approval by design type. 451.12... Approval of New Containers § 451.12 Application for approval by design type. (a) For approval of new containers by design type, each application must include the following: (1) Engineering drawings and plans...

49 CFR 451.12 - Application for approval by design type.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 6 2012-10-01 2012-10-01 false Application for approval by design type. 451.12... Approval of New Containers § 451.12 Application for approval by design type. (a) For approval of new containers by design type, each application must include the following: (1) Engineering drawings and plans...

49 CFR 451.12 - Application for approval by design type.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 6 2010-10-01 2010-10-01 false Application for approval by design type. 451.12... Approval of New Containers § 451.12 Application for approval by design type. (a) For approval of new containers by design type, each application must include the following: (1) Engineering drawings and plans...

49 CFR 451.12 - Application for approval by design type.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 6 2011-10-01 2011-10-01 false Application for approval by design type. 451.12... Approval of New Containers § 451.12 Application for approval by design type. (a) For approval of new containers by design type, each application must include the following: (1) Engineering drawings and plans...

14 CFR 21.97 - Approval of major changes in type design.

Code of Federal Regulations, 2013 CFR

2013-01-01

.... (a) An applicant for approval of a major change in type design must— (1) Provide substantiating data and necessary descriptive data for inclusion in the type design; (2) Show that the changed product... the necessary descriptive data for inclusion in the type design the other configurations of the same...

14 CFR 21.97 - Approval of major changes in type design.

Code of Federal Regulations, 2010 CFR

2010-01-01

... must submit substantiating data and necessary descriptive data for inclusion in the type design. (b... major change in type design must— (1) Provide substantiating data and necessary descriptive data for... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Approval of major changes in type design...

Study design in medical research: part 2 of a series on the evaluation of scientific publications.

PubMed

Röhrig, Bernd; du Prel, Jean-Baptist; Blettner, Maria

2009-03-01

The scientific value and informativeness of a medical study are determined to a major extent by the study design. Errors in study design cannot be corrected afterwards. Various aspects of study design are discussed in this article. Six essential considerations in the planning and evaluation of medical research studies are presented and discussed in the light of selected scientific articles from the international literature as well as the authors' own scientific expertise with regard to study design. The six main considerations for study design are the question to be answered, the study population, the unit of analysis, the type of study, the measuring technique, and the calculation of sample size. This article is intended to give the reader guidance in evaluating the design of studies in medical research. This should enable the reader to categorize medical studies better and to assess their scientific quality more accurately.

Value of information analysis optimizing future trial design from a pilot study on catheter securement devices.

PubMed

Tuffaha, Haitham W; Reynolds, Heather; Gordon, Louisa G; Rickard, Claire M; Scuffham, Paul A

2014-12-01

Value of information analysis has been proposed as an alternative to the standard hypothesis testing approach, which is based on type I and type II errors, in determining sample sizes for randomized clinical trials. However, in addition to sample size calculation, value of information analysis can optimize other aspects of research design such as possible comparator arms and alternative follow-up times, by considering trial designs that maximize the expected net benefit of research, which is the difference between the expected cost of the trial and the expected value of additional information. To apply value of information methods to the results of a pilot study on catheter securement devices to determine the optimal design of a future larger clinical trial. An economic evaluation was performed using data from a multi-arm randomized controlled pilot study comparing the efficacy of four types of catheter securement devices: standard polyurethane, tissue adhesive, bordered polyurethane and sutureless securement device. Probabilistic Monte Carlo simulation was used to characterize uncertainty surrounding the study results and to calculate the expected value of additional information. To guide the optimal future trial design, the expected costs and benefits of the alternative trial designs were estimated and compared. Analysis of the value of further information indicated that a randomized controlled trial on catheter securement devices is potentially worthwhile. Among the possible designs for the future trial, a four-arm study with 220 patients/arm would provide the highest expected net benefit corresponding to 130% return-on-investment. The initially considered design of 388 patients/arm, based on hypothesis testing calculations, would provide lower net benefit with return-on-investment of 79%. Cost-effectiveness and value of information analyses were based on the data from a single pilot trial which might affect the accuracy of our uncertainty estimation. Another limitation was that different follow-up durations for the larger trial were not evaluated. The value of information approach allows efficient trial design by maximizing the expected net benefit of additional research. This approach should be considered early in the design of randomized clinical trials. © The Author(s) 2014.

Exploring the Learning Problems and Resource Usage of Undergraduate Industrial Design Students in Design Studio Courses

ERIC Educational Resources Information Center

Chen, Wenzhi

2016-01-01

Design is a powerful weapon for modern companies so it is important to have excellent designers in the industry. The purpose of this study is to explore the learning problems and the resources that students use to overcome problems in undergraduate industrial design studio courses. A survey with open-type questions was conducted to collect data.…

Image design and replication for image-plane disk-type multiplex holograms

NASA Astrophysics Data System (ADS)

Chen, Chih-Hung; Cheng, Yih-Shyang

2017-09-01

The fabrication methods and parameter design for both real-image generation and virtual-image display in image-plane disk-type multiplex holography are introduced in this paper. A theoretical model of a disk-type hologram is also presented and is then used in our two-step holographic processes, including the production of a non-image-plane master hologram and optical replication using a single-beam copying system for the production of duplicated holograms. Experimental results are also presented to verify the possibility of mass production using the one-shot holographic display technology described in this study.

Exploring the interaction of patient activation and message design variables: message frame and presentation mode influence on the walking behavior of patients with type 2 diabetes.

PubMed

Ledford, Christy J W

2012-10-01

Examining interpersonal (physician-patient) communication strategies for promoting walking exercise to patients with type 2 diabetes assigned to primary care clinics, the study evaluated two message design variables--frame and presentation mode--as influencers of communication and adoption success. The single-site, four-week, prospective intervention study followed a 2×3 factorial, non-equivalent comparison group quasi-experimental design. Results showed frame was significantly related to steps walked; however, when including patient activation as an interaction, frame was non-significant. The model including patient activation interactions, however, detected significant mode effects on behavior. Results provide evidence that statistics are most effectively used with activated patients.

A novel type of highly effective nonionic gemini alkyl O-glucoside surfactants: a versatile strategy of design.

PubMed

Liu, Songbai; Sang, Ruocheng; Hong, Shan; Cai, Yujing; Wang, Hua

2013-07-09

A novel type of highly effective gemini alkyl glucosides has been rationally designed and synthesized. The gemini surfactants have been readily prepared by glycosylation of the gemini alkyl chains that are synthesized with regioselective ring-opening of ethylene glycol epoxides by the alkyl alcohols. The new gemini alkyl glucosides exhibit significantly better surface activity than the known results. Then rheological, DLS, and TEM studies have revealed the intriguing self-assembly behavior of the novel gemini surfactants. This study has proved the effectiveness of the design of gemini alkyl glucosides which is modular, extendable, and synthetically simple. The new gemini surfactants have great potential as nano carriers in drug and gene delivery.

The effect of design modifications to the typographical layout of the New York State elementary science learning standards on user preference and process time

NASA Astrophysics Data System (ADS)

Arnold, Jeffery E.

The purpose of this study was to determine the effect of four different design layouts of the New York State elementary science learning standards on user processing time and preference. Three newly developed layouts contained the same information as the standards core curriculum. In this study, the layout of the core guide is referred to as Book. The layouts of the new documents are referred to as Chart, Map, and Tabloid based on the format used to convey content hierarchy information. Most notably, all the new layouts feature larger page sizes, color, page tabs, and an icon based navigation system (IBNS). A convenience sample of 48 New York State educators representing three educator types (16 pre-service teachers, 16 in-service teachers, and 16 administrators) participated in the study. After completing timed tasks accurately, participants scored each layout based on preference. Educator type and layout were the independent variables, and process time and user preference were the dependent variables. A two-factor experimental design with Educator Type as the between variable and with repeated measures on Layout, the within variable, showed a significant difference in process time for Educator Type and Layout. The main effect for Educator Type (F(2, 45) = 8.03, p <.001) was significant with an observed power of .94, and an effect size of .26. The pair-wise comparisons for process time showed that pre-service teachers (p = .02) and administrators (p =.009) completed the assigned tasks more quickly when compared to in-service teachers. The main effect for Layout (F(3, 135) = 4.47, p =.01) was also significant with an observed power of .80, and an effect size of .09. Pair-wise comparisons showed that the newly developed Chart (p = .019) and Map (p = .032) layouts reduced overall process time when compared to the existing state learning standards (Book). The Layout X Educator type interaction was not significant. The same two-factor experimental design on preference, showed the main effect for Layout (F(3, 135) = 28.43, p =.001) was significant. The observed power was 1.0, with an effect size of .39. Pair-wise comparisons for preference scores showed that the Chart (p = .001), Map (p = .001), and Tabloid (p = .001) were preferred over the Book layout. The Layout Type X Educator Type interaction and the main effect for Educator Type were not significant. This study provides evidence that the newly developed design layouts improve usability (as measured by process time and preference scores) of the New York State elementary science learning standard documents. Features in the new layout design, such as the IBNS, may provide a foundation for a visual language and aid users in navigating standard documents across grade level and subject areas. Implications for the next generation of standard documents are presented.

Designing Environments for Handicapped Children: A Design Guide and Case Study. First Edition.

ERIC Educational Resources Information Center

Moore, Gary T.; And Others

This guide addresses the planning and architectural design of play/learning environments for special needs children. The exceptional children discussed include those with most types of mild to severe handicaps and developmental disabilities. Specifically excluded from consideration are health impairments, severe psycho-emotional difficulties such…

Heat source reentry vehicle design study

NASA Technical Reports Server (NTRS)

Ryan, R. L.

1971-01-01

The design details are presented of a flight-type heat source reentry vehicle and heat exchanger compatible with the isotope Brayton power conversion system. The reference reentry vehicle and heat exchanger were modified, orbital and superorbital capability was assessed, and a complete set of detail design layout drawings were provided.

Adapting the Mathematical Task Framework to Design Online Didactic Objects

ERIC Educational Resources Information Center

Bowers, Janet; Bezuk, Nadine; Aguilar, Karen

2011-01-01

Designing didactic objects involves imagining how students can conceive of specific mathematical topics and then imagining what types of classroom discussions could support these mental constructions. This study investigated whether it was possible to design Java applets that might serve as didactic objects to support online learning where…

FODEM: A Multi-Threaded Research and Development Method for Educational Technology

ERIC Educational Resources Information Center

Suhonen, Jarkko; de Villiers, M. Ruth; Sutinen, Erkki

2012-01-01

Formative development method (FODEM) is a multithreaded design approach that was originated to support the design and development of various types of educational technology innovations, such as learning tools, and online study programmes. The threaded and agile structure of the approach provides flexibility to the design process. Intensive…

Deformation of metal brackets: a comparative study.

PubMed

Flores, D A; Choi, L K; Caruso, J M; Tomlinson, J L; Scott, G E; Jeiroudi, M T

1994-01-01

The purpose of this study was to determine the effect of material and design on the force and stress required to permanently deform metal brackets. Fourteen types of metal brackets were categorized according to raw material composition, slot torque degree, and wing type. Five types of raw materials, three types of slot torque degree, and four types of wing design were tested using an archwire torque test developed by Flores. An analysis of variance (ANOVA) and t-test showed that all three categories had a significant effect on the force and stress needed to permanently deform metal brackets. Of the three, raw material had the greatest effect on the amount of force. Results showed that 17-4PH and 303S had higher yield strengths and regular twin brackets had higher resistance to deformation. Also, as slot torque degree increased, brackets deformed with less force. Result confirmed that brackets requiring the greatest stress to permanently deform were made of steel with the greatest hardness.

Design and optimization of membrane-type acoustic metamaterials

NASA Astrophysics Data System (ADS)

Blevins, Matthew Grant

One of the most common problems in noise control is the attenuation of low frequency noise. Typical solutions require barriers with high density and/or thickness. Membrane-type acoustic metamaterials are a novel type of engineered material capable of high low-frequency transmission loss despite their small thickness and light weight. These materials are ideally suited to applications with strict size and weight limitations such as aircraft, automobiles, and buildings. The transmission loss profile can be manipulated by changing the micro-level substructure, stacking multiple unit cells, or by creating multi-celled arrays. To date, analysis has focused primarily on experimental studies in plane-wave tubes and numerical modeling using finite element methods. These methods are inefficient when used for applications that require iterative changes to the structure of the material. To facilitate design and optimization of membrane-type acoustic metamaterials, computationally efficient dynamic models based on the impedance-mobility approach are proposed. Models of a single unit cell in a waveguide and in a baffle, a double layer of unit cells in a waveguide, and an array of unit cells in a baffle are studied. The accuracy of the models and the validity of assumptions used are verified using a finite element method. The remarkable computational efficiency of the impedance-mobility models compared to finite element methods enables implementation in design tools based on a graphical user interface and in optimization schemes. Genetic algorithms are used to optimize the unit cell design for a variety of noise reduction goals, including maximizing transmission loss for broadband, narrow-band, and tonal noise sources. The tools for design and optimization created in this work will enable rapid implementation of membrane-type acoustic metamaterials to solve real-world noise control problems.

Rationale, design and methods of the HEALTHY study physical education intervention component

USDA-ARS?s Scientific Manuscript database

The HEALTHY primary prevention trial was designed to reduce risk factors for type 2 diabetes in middle school students. Middle schools at seven centers across the United States participated in the 3-year study. Half of them were randomized to receive a multi-component intervention. The intervention ...

Design of ERIC Usage Studies. Volume I.

ERIC Educational Resources Information Center

ERIC Clearinghouse on Information Resources, Syracuse, NY.

Tables showing the types of Educational Resources Information Center (ERIC) products and their dispersion provide background information for the executive summaries of usage study design reports focusing on three levels: (1) system operations; (2) subscribers to the services provided; and (3) the ultimate "end-users" of the service. The…

Comparison of female foot morphology and last design in athletic footwear--are men's lasts appropriate for women?

PubMed

Krauss, Inga; Valiant, Gordon; Horstmann, Thomas; Grau, Stefan

2010-04-01

The purpose of this study was to investigate differences between female feet and last design. Four hundred twenty-four feet and four men's running shoe lasts (U.S. women 6.0-9.5), which also are used for the manufacturing of women's shoes, were scanned in three dimensions. Six foot measures were quantified. Different foot types were classified using a cluster analysis. Comparisons were made between last measures and averaged as well as foot type specific foot measures. Differences in width measures between lasts and foot types vary substantially (0-9 mm). Length grading is similar for lasts and feet (differences < 1mm). Width grading is larger in lasts in comparison with average grading in feet (3.5-5.9 mm). Last design and grading should account for the sex-specific allometry in foot measures. The use of down-graded men's lasts for women's shoes has to be questioned. Therefore, sex-specific reference measures and wear tests should incorporate different foot types in different sizes to allow suitable implications for a proper design and grading of lasts.

Finding gene clusters for a replicated time course study

PubMed Central

2014-01-01

Background Finding genes that share similar expression patterns across samples is an important question that is frequently asked in high-throughput microarray studies. Traditional clustering algorithms such as K-means clustering and hierarchical clustering base gene clustering directly on the observed measurements and do not take into account the specific experimental design under which the microarray data were collected. A new model-based clustering method, the clustering of regression models method, takes into account the specific design of the microarray study and bases the clustering on how genes are related to sample covariates. It can find useful gene clusters for studies from complicated study designs such as replicated time course studies. Findings In this paper, we applied the clustering of regression models method to data from a time course study of yeast on two genotypes, wild type and YOX1 mutant, each with two technical replicates, and compared the clustering results with K-means clustering. We identified gene clusters that have similar expression patterns in wild type yeast, two of which were missed by K-means clustering. We further identified gene clusters whose expression patterns were changed in YOX1 mutant yeast compared to wild type yeast. Conclusions The clustering of regression models method can be a valuable tool for identifying genes that are coordinately transcribed by a common mechanism. PMID:24460656

Data Management Systems (DMS): Complex data types study. Volume 1: Appendices A-B. Volume 2: Appendices C1-C5. Volume 3: Appendices D1-D3 and E

NASA Technical Reports Server (NTRS)

Leibfried, T. F., Jr.; Davari, Sadegh; Natarajan, Swami; Zhao, Wei

1992-01-01

Two categories were chosen for study: the issue of using a preprocessor on Ada code of Application Programs which would interface with the Run-Time Object Data Base Standard Services (RODB STSV), the intent was to catch and correct any mis-registration errors of the program coder between the user declared Objects, their types, their addresses, and the corresponding RODB definitions; and RODB STSV Performance Issues and Identification of Problems with the planned methods for accessing Primitive Object Attributes, this included the study of an alternate storage scheme to the 'store objects by attribute' scheme in the current design of the RODB. The study resulted in essentially three separate documents, an interpretation of the system requirements, an assessment of the preliminary design, and a detailing of the components of a detailed design.

Kinetic bridges.

DOT National Transportation Integrated Search

1980-01-01

This report on kinetic bridges is essentially a state-of-the-art study on two types of bridges whose location or physical characteristics are designed to be time dependent. The first type, called a "relocatable bridge", is essentially for use as a te...

Development of Primer Pairs from Molecular Typing of Rabies Virus Variants Present in Mexico

PubMed Central

Ramírez-Hernández, Dolores G.; Lara-Padilla, Eleazar; Zárate-Segura, Paola

2016-01-01

Nucleoprotein (N) gene from rabies virus (RABV) is a useful sequence target for variant studies. Several specific RABV variants have been characterized in different mammalian hosts such as skunk, dog, and bats by using anti-nucleocapsid monoclonal antibodies (MAbs) via indirect fluorescent antibody (IFA) test, a technique not available in many laboratories in Mexico. In the present study, a total of 158 sequences of N gene from RABV were used to design eight pairs of primers (four external and four internal primers), for typing four different RABV variants (dog, skunk, vampire bat, and nonhematophagous bat) which are most common in Mexico. The results indicate that the primer and the typing variant from the brain samples, submitted to nested and/or real-time PCR, are in agreement in all four singleplex reactions, and the designed primer pairs are an alternative for use in specific variant RABV typing. PMID:27563666

Development of Primer Pairs from Molecular Typing of Rabies Virus Variants Present in Mexico.

PubMed

Bastida-González, Fernando; Ramírez-Hernández, Dolores G; Chavira-Suárez, Erika; Lara-Padilla, Eleazar; Zárate-Segura, Paola

2016-01-01

Nucleoprotein (N) gene from rabies virus (RABV) is a useful sequence target for variant studies. Several specific RABV variants have been characterized in different mammalian hosts such as skunk, dog, and bats by using anti-nucleocapsid monoclonal antibodies (MAbs) via indirect fluorescent antibody (IFA) test, a technique not available in many laboratories in Mexico. In the present study, a total of 158 sequences of N gene from RABV were used to design eight pairs of primers (four external and four internal primers), for typing four different RABV variants (dog, skunk, vampire bat, and nonhematophagous bat) which are most common in Mexico. The results indicate that the primer and the typing variant from the brain samples, submitted to nested and/or real-time PCR, are in agreement in all four singleplex reactions, and the designed primer pairs are an alternative for use in specific variant RABV typing.

Three types of solid state remote power controllers

NASA Technical Reports Server (NTRS)

Baker, D. E.

1975-01-01

Three types of solid state Remote Power Controller (RPC) circuits for 120 Vdc spacecraft distribution systems have been developed and evaluated. Both current limiting and noncurrent limiting modes of overload protection were developed and were demonstrated to be feasible. A second generation of circuits was developed which offers comparable performance with substantially less cost and complexity. Electrical efficiency for both generations is 98.5 to 99%. This paper describes various aspects of the circuit design, trade-off studies, and experimental test results. Comparisons of design parameters, component requirements, and engineering model evaluations will emphasize the high efficiency and reliability of the designs.

Design of a new separable rotary transformer

NASA Astrophysics Data System (ADS)

Gong, X. F.; Zhang, L.; Feng, E. J.

2017-09-01

A new-type separable rotary transformer which can be used in rotary steerable drilling is designed to deliver power efficiently from a stationary primary source to a rotary secondary load over a relatively large air gap via magnetic coupling. In this paper, E-type magnetic cores are reasonably distributed so that rotation of the rotary secondary has the least influence on reluctance of magnetic coupling. The influence of different winding layouts and connection modes on self-inductance and coupling coefficient is studied. By analysing the influence of the different geometrical shapes of cores on magnetic path, a design principle is proposed.

Effect of fuels and domestic heating appliance types on emission factors of selected organic pollutants.

PubMed

Šyc, Michal; Horák, Jiří; Hopan, František; Krpec, Kamil; Tomšej, Tomáš; Ocelka, Tomáš; Pekárek, Vladimír

2011-11-01

This study reports on the first complex data set of emission factors (EFs) of selected pollutants from combustion of five fuel types (lignite, bituminous coal, spruce, beech, and maize) in six different domestic heating appliances of various combustion designs. The effect of fuel as well as the effect of boiler type was studied. In total, 46 combustion runs were performed, during which numerous EFs were measured, including the EFs of particulate matter (PM), carbon monoxide, polyaromatic hydrocarbons (PAH), hexachlorobenzene (HxCBz), polychlorinated dibenzo-p-dioxins and furans (PCDD/F), etc. The highest EFs of nonchlorinated pollutants were measured for old-type boilers with over-fire and under-fire designs and with manual stoking and natural draft. Emissions of the above-mentioned pollutants from modern-type boilers (automatic, downdraft) were 10 times lower or more. The decisive factor for emission rate of nonchlorinated pollutants was the type of appliance; the type of fuel plays only a minor role. Emissions of chlorinated pollutants were proportional mainly to the chlorine content in fuel, but the type of appliance also influenced the rate of emissions significantly. Surprisingly, higher EFs of PCDD/F from combustion of chlorinated bituminous coal were observed for modern-type boilers (downdraft, automatic) than for old-type ones. On the other hand, when bituminous coal was burned, higher emissions of HxCBz were found for old-type boilers than for modern-type ones.

Comparative study of design and PCL-substituting systems of total knee prosthesis.

PubMed

Adam, R; Orban, C; Orban, H

2014-01-01

The aim of this study is to assess postoperative results obtained by different knee implants. The main implant types differences are given by generally implant design and by PCL substituting systems that are used. Between 04.2004 - 02.2012 we have performed 506 total knee arthroplasties (TKA), on a group of 460 patients. Our choice, was for cemented total knee prostheses, using PCL-substituting systems. Regarding general design and PCL-substituting systems of the implant we had divided the main group in three lots. In order to assess post operative result we had used the American Knee Society Score(AKSS). All prostheses types that we had implanted, had registered satisfactory values of AKSS. Our study showed that one group scored higher values of AKSS, compared the other two, but there are not statistical semnificative differences (p=0,09). Celsius.

The 30/20 Gigahertz transponder study. [wideband multichannel transponders for a communications satellite

NASA Technical Reports Server (NTRS)

1980-01-01

Design features and performance parameters are described for three types of wideband multiple channel satellite transponders for use in a 30/20 GHz communications satellite, which provides high data rate trunking service to ten ground station terminals. The three types of transponder are frequency division multiplex (FDM), time division multiplex (TDM), and a hybrid transponder using a combination of FDM and TDM techniques. The wideband multiple beam trunking concept, the traffic distribution between the trunking terminals, and system design constraints are discussed. The receiver front end design, the frequency conversion scheme, and the local oscillator design are described including the thermal interface between the transponders and the satellite. The three designs are compared with regard to performance, weight, power, cost and initial technology. Simplified block diagrams of the baseline transponder designs are included.

Buckling and weight optimization for non-coupled antisymmetric laminates

NASA Astrophysics Data System (ADS)

Bhatnagar, Aditi

This research work describes the application of genetic algorithms to weight minimization and buckling load maximization of the non-coupled antisymmetric composite laminated plates. Previous studies of composite tailoring were limited to symmetric and balanced laminates. With the availability of many methodologies for composite tailoring, genetic algorithm is preferably used because of its ability to handle discrete design variable and attain multiple near optimum design solutions. A comparative study is made between optimum symmetric-balanced laminate designs and optimum non-coupled antisymmetric laminate designs, both of which are subjected to biaxial in-plane compressive loads. With the implementation of various genetic algorithm operators such as selection, crossover and mutation, critical buckling load factors are obtained for the optimum stacking sequence for both types of laminates. The mechanical properties for non-coupled antisymmetric laminates is independent of all types of coupling effects such as bending-twisting coupling, bending-extension coupling, and shear-extension coupling, thus giving the laminate a non-coupling behavior. This is in contrast to that of symmetric-balanced laminates where finite bending-twisting coupling terms are present. Optimized laminate layups satisfying the constraints of balance, buckling and adjoining were obtained for two types of graphite epoxy rectangular composite laminated plates. The current research augments the laminate thickness minimization designs with both odd and even number of layers, and the optimum buckling load maximization designs by the introduction of non-coupled antisymmetric laminates.

Type synthesis for 4-DOF parallel press mechanism using GF set theory

NASA Astrophysics Data System (ADS)

He, Jun; Gao, Feng; Meng, Xiangdun; Guo, Weizhong

2015-07-01

Parallel mechanisms is used in the large capacity servo press to avoid the over-constraint of the traditional redundant actuation. Currently, the researches mainly focus on the performance analysis for some specific parallel press mechanisms. However, the type synthesis and evaluation of parallel press mechanisms is seldom studied, especially for the four degrees of freedom(DOF) press mechanisms. The type synthesis of 4-DOF parallel press mechanisms is carried out based on the generalized function(GF) set theory. Five design criteria of 4-DOF parallel press mechanisms are firstly proposed. The general procedure of type synthesis of parallel press mechanisms is obtained, which includes number synthesis, symmetrical synthesis of constraint GF sets, decomposition of motion GF sets and design of limbs. Nine combinations of constraint GF sets of 4-DOF parallel press mechanisms, ten combinations of GF sets of active limbs, and eleven combinations of GF sets of passive limbs are synthesized. Thirty-eight kinds of press mechanisms are presented and then different structures of kinematic limbs are designed. Finally, the geometrical constraint complexity( GCC), kinematic pair complexity( KPC), and type complexity( TC) are proposed to evaluate the press types and the optimal press type is achieved. The general methodologies of type synthesis and evaluation for parallel press mechanism are suggested.

Design of a family-based lifestyle intervention for youth with type 2 diabetes: the TODAY study

PubMed Central

2009-01-01

Type 2 diabetes is associated with obesity and is increasing at an alarming rate in youth. Although weight loss through lifestyle change is one of the primary treatment recommendations for adults with type 2 diabetes, the efficacy of this approach has not been tested with youth. This paper provides a summary of the reviews and meta-analyses of pediatric weight-loss interventions that informed the design and implementation of an intensive, family-based lifestyle weight management program for adolescents with type 2 diabetes and their families developed for the Treatment Options for type 2 Diabetes in Adolescents and Youth (TODAY) study. A total of 1092 youth have been screened, and 704 families have been randomized for inclusion in this 15-center clinical trial sponsored by the National Institutes of Health. The TODAY study is designed to test three approaches (metformin, metformin plus rosiglitazone and metformin plus an intensive lifestyle intervention) to the treatment of a diverse cohort of youth, 10–17 years of age, within 2 years of their diagnosis. The principal goal of the TODAY Lifestyle Program (TLP) is to decrease baseline weight of youth by 7–10% (or the equivalent for children who are growing in height) through changes in eating and physical activity habits, and to sustain these changes through ongoing treatment contact. The TLP is implemented by interventionists called Personal Activity and Nutrition Leaders (PALs) and delivered to youth with type 2 diabetes, and at least one family support person. The TLP provides a model for taking a comprehensive, continuous care approach to the treatment of severe overweight in youth with comorbid medical conditions such as type 2 diabetes. PMID:19823189

The stress-reducing effects of art in pediatric health care: art preferences of healthy children and hospitalized children.

PubMed

Eisen, Sarajane L; Ulrich, Roger S; Shepley, Mardelle M; Varni, James W; Sherman, Sandra

2008-09-01

Art is assumed to possess therapeutic benefits of healing for children, as part of patient-focused design in health care. Since the psychological and physiological well-being of children in health care settings is extremely important in contributing to the healing process, it is vitally important to identify what type of art supports stress reduction. Based on adult studies, nature art was anticipated to be the most preferred and to have stress-reducing effects on pediatric patients. Nature art refers to art images dominated by natural vegetation, flowers or water. The objective of this study was to investigate what type of art image children prefer, and what type of art image has potentially stress-reducing effects on children in hospitals. This study used a three-phase, multi-method approach with children aged 5-17 years: a focus group study (129 participants), a randomized study (48 participants), and a quasi-experimental study design (48 participants). Findings were evaluated from three phases.

Self-management of type 2 diabetes in gulf cooperation council countries: A systematic review.

PubMed

Al Slamah, Thamer; Nicholl, Barbara I; Alslail, Fatima Y; Melville, Craig A

2017-01-01

This study aimed to systematically review intervention studies on self-management of type 2 diabetes in Gulf Cooperation Council (GCC) countries to determine the most effective self-management strategies for individuals with type 2 diabetes in this region. A search strategy was developed using multiple databases: Medline and Embase (via Ovid), CINAHL (via EBSCO), and PubMed. Study and intervention characteristics, intervention structure, content, cultural adaptation, and outcomes were extracted from the included studies. To be included in the review the studies should have met the following criteria: have examined the effectiveness of at least one intervention involving a type 2 DSME programme, have involved participants over 18 years old diagnosed with type 2 diabetes, have taken place to in a GCC country, have a study design that was observational, quasi-experimental or controlled, have reported at least one individual and have a quantitative outcome. A narrative data synthesis was used to describe the studies and comment on their methodological quality. Of the 737 retrieved papers, only eight met the inclusion criteria. Only one study was a randomised controlled trial. A statistically significant improvement in HbA1c was reported in five of the eight studies. There was a significant improvement in physical activity levels as reported in four of the eight studies. Only three studies referred to aspects of cultural design or adaptation of the intervention implemented. Self-management interventions may have a positive impact on HbA1 levels in patients with type 2 diabetes in the GCC area. A greater emphasis placed on culturally appropriate self-management programmes may improve the effectiveness of self-management interventions for adults with type 2 diabetes in the GCC.

Self-management of type 2 diabetes in gulf cooperation council countries: A systematic review

PubMed Central

Nicholl, Barbara I.; Alslail, Fatima Y.; Melville, Craig A.

2017-01-01

Aims This study aimed to systematically review intervention studies on self-management of type 2 diabetes in Gulf Cooperation Council (GCC) countries to determine the most effective self-management strategies for individuals with type 2 diabetes in this region. Methods A search strategy was developed using multiple databases: Medline and Embase (via Ovid), CINAHL (via EBSCO), and PubMed. Study and intervention characteristics, intervention structure, content, cultural adaptation, and outcomes were extracted from the included studies. To be included in the review the studies should have met the following criteria: have examined the effectiveness of at least one intervention involving a type 2 DSME programme, have involved participants over 18 years old diagnosed with type 2 diabetes, have taken place to in a GCC country, have a study design that was observational, quasi-experimental or controlled, have reported at least one individual and have a quantitative outcome. A narrative data synthesis was used to describe the studies and comment on their methodological quality. Results Of the 737 retrieved papers, only eight met the inclusion criteria. Only one study was a randomised controlled trial. A statistically significant improvement in HbA1c was reported in five of the eight studies. There was a significant improvement in physical activity levels as reported in four of the eight studies. Only three studies referred to aspects of cultural design or adaptation of the intervention implemented. Conclusions Self-management interventions may have a positive impact on HbA1 levels in patients with type 2 diabetes in the GCC area. A greater emphasis placed on culturally appropriate self-management programmes may improve the effectiveness of self-management interventions for adults with type 2 diabetes in the GCC. PMID:29232697

The Effect of Being Hypermedia Designers on Elementary School Students' Motivation and Learning of Design Knowledge.

ERIC Educational Resources Information Center

Liu, Min; Pedersen, Susan

Current educational theory and practice clearly show that project-based instruction has the potential to enhance learning. Preliminary findings on one type of project-based learning in which students take on the role of hypermedia designers support this claim. This study examined the effect of being hypermedia designers on fourth-graders'…

Implications of clinical trial design on sample size requirements.

PubMed

Leon, Andrew C

2008-07-01

The primary goal in designing a randomized controlled clinical trial (RCT) is to minimize bias in the estimate of treatment effect. Randomized group assignment, double-blinded assessments, and control or comparison groups reduce the risk of bias. The design must also provide sufficient statistical power to detect a clinically meaningful treatment effect and maintain a nominal level of type I error. An attempt to integrate neurocognitive science into an RCT poses additional challenges. Two particularly relevant aspects of such a design often receive insufficient attention in an RCT. Multiple outcomes inflate type I error, and an unreliable assessment process introduces bias and reduces statistical power. Here we describe how both unreliability and multiple outcomes can increase the study costs and duration and reduce the feasibility of the study. The objective of this article is to consider strategies that overcome the problems of unreliability and multiplicity.

Personal computer wallpaper user segmentation based on Sasang typology.

PubMed

Lee, Joung-Youn

2015-03-01

As human-computer interaction (HCI) is becoming a significant part of all human life, the user's emotional satisfaction is an important factor to consider. These changes have been pointed out by several researchers who claim that a user's personality may become the most important factor in the design. The objective of this study is to examine Sasang typology as a user segmentation method in the area of HCI design. To test HCI usage patterns in terms of the user's personality and temperament, this study focuses on personal computer (PC) or lap-top wallpaper settings. One hundred and four Facebook friends completed a QSCC II survey assessing Sasang typology type and sent a captured image of their personal PC or lap-top wallpaper. To classify the computer usage pattern, folder organization and wallpaper setting were investigated. The research showed that So-Yang type organized folders and icons in an orderly manner, whereas So-Eum type did not organize folders and icons at all. With regard to wallpaper settings, So-Yang type used the default wallpaper provided by the PC but So-Eum type used landscape images. Because So-Yang type was reported to be emotionally stable and extrovert, they tended to be highly concerned with online privacy compared with So-Eum type. So-Eum type use a lot of images of landscapes as the background image, which demonstrates So-Eum's low emotional stability, anxiety, and the desire to obtain analogy throughout the computer screen. Also, So-Yang's wallpapers display family or peripheral figures and this is due to the sociability that extrovert So-Yang types possess. By proposing the Sasang typology as a factor in influencing an HCI usage pattern in this study, it can be used to predict the user's HCI experience, or suggest a native design methodology that can actively cope with the user's psychological environment.

Dimensions of design space: a decision-theoretic approach to optimal research design.

PubMed

Conti, Stefano; Claxton, Karl

2009-01-01

Bayesian decision theory can be used not only to establish the optimal sample size and its allocation in a single clinical study but also to identify an optimal portfolio of research combining different types of study design. Within a single study, the highest societal payoff to proposed research is achieved when its sample sizes and allocation between available treatment options are chosen to maximize the expected net benefit of sampling (ENBS). Where a number of different types of study informing different parameters in the decision problem could be conducted, the simultaneous estimation of ENBS across all dimensions of the design space is required to identify the optimal sample sizes and allocations within such a research portfolio. This is illustrated through a simple example of a decision model of zanamivir for the treatment of influenza. The possible study designs include: 1) a single trial of all the parameters, 2) a clinical trial providing evidence only on clinical endpoints, 3) an epidemiological study of natural history of disease, and 4) a survey of quality of life. The possible combinations, samples sizes, and allocation between trial arms are evaluated over a range of cost-effectiveness thresholds. The computational challenges are addressed by implementing optimization algorithms to search the ENBS surface more efficiently over such large dimensions.

Balancing the Evidence: How to Reconcile the Results of Observational Studies vs. Randomized Clinical Trials in Dialysis.

PubMed

Shen, Jenny I; Lum, Erik L; Chang, Tara I

2016-09-01

Because large randomized clinical trials (RCTs) in dialysis have been relatively scarce, evidence-based dialysis care has depended heavily on the results of observational studies. However, when results from RCTs appear to contradict the findings of observational studies, nephrologists are left to wonder which type of study they should believe. In this editorial, we explore the key differences between observational studies and RCTs in the context of such seemingly conflicting studies in dialysis. Confounding is the major limitation of observational studies, whereas low statistical power and problems with external validity are more likely to limit the findings of RCTs. Differences in the specification of the population, exposure, and outcomes can also contribute to different results among RCTs and observational studies. Rigorous methods are required regardless of what type of study is conducted, and readers should not automatically assume that one type of study design is superior to the other. Ultimately, dialysis care requires both well-designed, well-conducted observational studies and RCTs to move the field forward. © 2016 Wiley Periodicals, Inc.

Balancing the Evidence: How to Reconcile the Results of Observational Studies vs. Randomized Clinical Trials in Dialysis

PubMed Central

Shen, Jenny I.; Lum, Erik L.; Chang, Tara I.

2016-01-01

Because large randomized clinical trials (RCTs) in dialysis have been relatively scarce, evidence-based dialysis care has depended heavily on the results of observational studies. However, when results from RCTs appear to contradict the findings of observational studies, nephrologists are left to wonder which type of study they should believe. In this editorial we explore the key differences between observational studies and RCTs in the context of such seemingly conflicting studies in dialysis. Confounding is the major limitation of observational studies, while low statistical power and problems with external validity are more likely to limit the findings of RCTs. Differences in the specification of the population, exposure, and outcomes can also contribute to different results among RCTs and observational studies. Rigorous methods are required regardless of what type of study is conducted, and readers should not automatically assume that one type of study design is superior to the other. Ultimately, dialysis care requires both well-designed, well-conducted observational studies and RCTs to move the field forward. PMID:27207819

Notch sensitivity jeopardizes titanium locking plate fatigue strength.

PubMed

Tseng, Wo-Jan; Chao, Ching-Kong; Wang, Chun-Chin; Lin, Jinn

2016-12-01

Notch sensitivity may compromise titanium-alloy plate fatigue strength. However, no studies providing head-to-head comparisons of stainless-steel or titanium-alloy locking plates exist. Custom-designed identically structured locking plates were made from stainless steel (F138 and F1314) or titanium alloy. Three screw-hole designs were compared: threaded screw-holes with angle edges (type I); threaded screw-holes with chamfered edges (type II); and non-threaded screw-holes with chamfered edges (type III). The plates' bending stiffness, bending strength, and fatigue life, were investigated. The stress concentration at the screw threads was assessed using finite element analyses (FEA). The titanium plates had higher bending strength than the F1314 and F138 plates (2.95:1.56:1) in static loading tests. For all metals, the type-III plate fatigue life was highest, followed by type-II and type-I. The type-III titanium plates had longer fatigue lives than their F138 counterparts, but the type-I and type-II titanium plates had significantly shorter fatigue lives. All F1314 plate types had longer fatigue lives than the type-III titanium plates. The FEA showed minimal stress difference (0.4%) between types II and III, but the stress for types II and III was lower (11.9% and 12.4%) than that for type I. The screw threads did not cause stress concentration in the locking plates in FEA, but may have jeopardized the fatigue strength, especially in the notch-sensitive titanium plates. Improvement to the locking plate design is necessary. Copyright © 2016 Elsevier Ltd. All rights reserved.

Integrated reflector antenna design and analysis

NASA Technical Reports Server (NTRS)

Zimmerman, M. L.; Lee, S. W.; Ni, S.; Christensen, M.; Wang, Y. M.

1993-01-01

Reflector antenna design is a mature field and most aspects were studied. However, of that most previous work is distinguished by the fact that it is narrow in scope, analyzing only a particular problem under certain conditions. Methods of analysis of this type are not useful for working on real-life problems since they can not handle the many and various types of perturbations of basic antenna design. The idea of an integrated design and analysis is proposed. By broadening the scope of the analysis, it becomes possible to deal with the intricacies attendant with modem reflector antenna design problems. The concept of integrated reflector antenna design is put forward. A number of electromagnetic problems related to reflector antenna design are investigated. Some of these show how tools for reflector antenna design are created. In particular, a method for estimating spillover loss for open-ended waveguide feeds is examined. The problem of calculating and optimizing beam efficiency (an important figure of merit in radiometry applications) is also solved. Other chapters deal with applications of this general analysis. The wide angle scan abilities of reflector antennas is examined and a design is proposed for the ATDRSS triband reflector antenna. The development of a general phased-array pattern computation program is discussed and how the concept of integrated design can be extended to other types of antennas is shown. The conclusions are contained in the final chapter.

Discriminating between stabilizing and destabilizing protein design mutations via recombination and simulation.

PubMed

Johnson, Lucas B; Gintner, Lucas P; Park, Sehoo; Snow, Christopher D

2015-08-01

Accuracy of current computational protein design (CPD) methods is limited by inherent approximations in energy potentials and sampling. These limitations are often used to qualitatively explain design failures; however, relatively few studies provide specific examples or quantitative details that can be used to improve future CPD methods. Expanding the design method to include a library of sequences provides data that is well suited for discriminating between stabilizing and destabilizing design elements. Using thermophilic endoglucanase E1 from Acidothermus cellulolyticus as a model enzyme, we computationally designed a sequence with 60 mutations. The design sequence was rationally divided into structural blocks and recombined with the wild-type sequence. Resulting chimeras were assessed for activity and thermostability. Surprisingly, unlike previous chimera libraries, regression analysis based on one- and two-body effects was not sufficient for predicting chimera stability. Analysis of molecular dynamics simulations proved helpful in distinguishing stabilizing and destabilizing mutations. Reverting to the wild-type amino acid at destabilized sites partially regained design stability, and introducing predicted stabilizing mutations in wild-type E1 significantly enhanced thermostability. The ability to isolate stabilizing and destabilizing elements in computational design offers an opportunity to interpret previous design failures and improve future CPD methods. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Acoustic Characteristics of Various Treatment Panel Designs for HSCT Ejector Liner Acoustic Technology Development Program

NASA Technical Reports Server (NTRS)

Salikuddin, M.; Kraft, R. E.; Syed, A. a.; Vu, D. D.; Mungur, P.; Langenbrunner, L. E.; Majjigi, R. K.

2006-01-01

The objectives of the initial effort (Phase I) of HSR Liner Technology Program, the selection of promising liner concepts, design and fabrication of these concepts for laboratory tests, testing these liners in the laboratory by using impedance tube and flow ducts, and developing empirical impedance/suppression correlation, are successfully completed. Acoustic and aerodynamic criteria for the liner design are established. Based on these criteria several liners are designed. The liner concepts designed and fabricated include Single-Degree-of-Freedom (SDOF), Two-Degree-of-Freedom (2DOF), and Bulk Absorber. Two types of SDOF treatment are fabricated, one with a perforated type face plate and the other with a wiremesh (woven) type faceplate. In addition, special configurations of these concepts are also included in the design. Several treatment panels are designed for parametric study. In these panels the facesheets of different porosity, hole diameter, and sheet thickness are utilized. Several deep panels (i.e., 1 in. deep) are designed and instrumented to measure DC flow resistance and insitu impedance in the presence of grazing flow. Basic components of these panels (i.e., facesheets, bulk materials, etc.) are also procured and tested. The results include DC flow resistance, normal impedance, and insertion loss.

Baby-Friendly Practices Minimize Newborn Infants Weight Loss.

PubMed

Procaccini, Diane; Curley, Ann L Cupp; Goldman, Martha

2018-04-01

It is accepted that newborns lose weight in the first few days of life. Baby-Friendly practices that support breastfeeding may affect newborn weight loss. The objective of this study were: 1) To determine whether Baby-Friendly practices are associated with term newborn weight loss day 0-2 in three feeding categories (exclusively breastfed, mixed formula fed and breastfed, and formula fed). 2) To determine whether Baby-Friendly practices increase exclusive breast feeding rates in different ethnic populations. This was a retrospective case-control study. Term newborn birth weight, neonatal weights days 0-2, feeding type, type of birth, and demographic information were collected for 1,000 births for the year before Baby-Friendly designation (2010) and 1,000 in 2013 (after designation). Ultimately 683 in the first group and 518 in the second met the inclusion criteria. Mean weight loss decreased day 0-2 for infants in all feeding types after the initiation of Baby-Friendly practices. There was a statistically significant effect of Baby-Friendly designation on weight loss for day 0-2 in exclusively breastfed infants (p < 0.01) after controlling for birth weight. Exclusive breast feeding increased in all ethnic groups after Baby-Friendly practices were put in place. There was a decrease in mean weight loss day 0-2 regardless of feeding type after Baby-Friendly designation. Exclusive breast feeding increased in the presence of Baby-Friendly practices.

CONCEPTUAL DESIGN STUDY OF A MOBILE GAMMA IRRADIATOR FOR FRUIT PRODUCE

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1962-05-31

Engineering Drawings report available as CAPE-944. A conceptual design study was made of a mobile irradiator for radiopasteurization of strawberries, grapes, peaches, tomatoes, and lemons. Minimum radiation dose specification for the fruit ranged from 100,000 to 200,000 rads with maximum to minimum dose ratio in the range of 1.5 to 3. Minimum allowable production rates were in the range of 500 to 1000 lb of fruit/hr. The irradiator was required to be mobile, preferably on one truck capable of being put in operation one day after arrival at the site. Preliminary studies compared five types of irradiators, consisting of amore » single source slab, two package pass design; a double slab, single pass design; a single slab, four pass design; a line source rotary design; and a movable source, movable package design. It was concluded that a Co/sup 60/ irradiator can be built to meet the general requirements for radiopasteurization of fruit. The irradiator can be made mobile and can be mounted on a single trailer. The combined weight of the mobile unit would be 70 to 85 tons depending on the type of irradiator. This unit would require a special license from the State Highway Department. (C.H.)« less

Development and evaluation of a study design typology for human research.

PubMed

Carini, Simona; Pollock, Brad H; Lehmann, Harold P; Bakken, Suzanne; Barbour, Edward M; Gabriel, Davera; Hagler, Herbert K; Harper, Caryn R; Mollah, Shamim A; Nahm, Meredith; Nguyen, Hien H; Scheuermann, Richard H; Sim, Ida

2009-11-14

A systematic classification of study designs would be useful for researchers, systematic reviewers, readers, and research administrators, among others. As part of the Human Studies Database Project, we developed the Study Design Typology to standardize the classification of study designs in human research. We then performed a multiple observer masked evaluation of active research protocols in four institutions according to a standardized protocol. Thirty-five protocols were classified by three reviewers each into one of nine high-level study designs for interventional and observational research (e.g., N-of-1, Parallel Group, Case Crossover). Rater classification agreement was moderately high for the 35 protocols (Fleiss' kappa = 0.442) and higher still for the 23 quantitative studies (Fleiss' kappa = 0.463). We conclude that our typology shows initial promise for reliably distinguishing study design types for quantitative human research.

Lead free 0201 assembly and thermal cycle/aging reliability

NASA Technical Reports Server (NTRS)

Ghaffarian, Reza; Ramkumar, S. Manian; Varanasi, Arun

2005-01-01

The many challenges with 0201 passive component assembly can be attributed to the solder paste volume, pad design, aperture design, board finish, type of solder paste, pick-and-place, and reflow profile. A Design-of-Experiment (DOE) study was carried out to investigate the effects of these parameters on assembly defects and reliability.

Tying Theory To Practice: Cognitive Aspects of Computer Interaction in the Design Process.

ERIC Educational Resources Information Center

Mikovec, Amy E.; Dake, Dennis M.

The new medium of computer-aided design requires changes to the creative problem-solving methodologies typically employed in the development of new visual designs. Most theoretical models of creative problem-solving suggest a linear progression from preparation and incubation to some type of evaluative study of the "inspiration." These…

Blended-Wing-Body (BWB) Fuselage Structural Design for Weight Reduction

NASA Technical Reports Server (NTRS)

Mukhopadhyay, V.

2005-01-01

Structural analysis and design of efficient pressurized fuselage configurations for the advanced Blended-Wing-Body (BWB) flight vehicle is a challenging problem. Unlike a conventional cylindrical pressurized fuselage, stress level in a box type BWB fuselage is an order of magnitude higher, because internal pressure primarily results in bending stress instead of skin-membrane stress. In addition, resulting deformation of aerodynamic surface could significantly affect performance advantages provided by lifting body. The pressurized composite conformal multi-lobe tanks of X-33 type space vehicle also suffered from similar problem. In the earlier BWB design studies, Vaulted Ribbed Shell (VLRS), Flat Ribbed Shell (FRS); Vaulted shell Honeycomb Core (VLHC) and Flat sandwich shell Honeycomb Core (FLHC) concepts were studied. The flat and vaulted ribbed shell concepts were found most efficient. In a recent study, a set of composite sandwich panel and cross-ribbed panel were analyzed. Optimal values of rib and skin thickness, rib spacing, and panel depth were obtained for minimal weight under stress and buckling constraints. In addition, a set of efficient multi-bubble fuselage (MBF) configuration concept was developed. The special geometric configuration of this concept allows for balancing internal cabin pressure load efficiently, through membrane stress in inner-stiffened shell and inter-cabin walls, while the outer-ribbed shell prevents buckling due to external resultant compressive loads. The initial results from these approximate finite element analyses indicate progressively lower maximum stresses and deflections compared to the earlier study. However, a relative comparison of the FEM weight per unit floor area of the segment unit indicates that the unit weights are still relatively higher that the conventional B777 type cylindrical or A380 type elliptic fuselage design. Due to the manufacturing concern associated with multi-bubble fuselage, a Y braced box-type fuselage alternative with special resin-film injected (RFI) stitched carbon composite with foam-core was designed by Boeing under a NASA research contract for the 480 passenger version. It is shown that this configuration can be improved to a modified multi-bubble fuselage which has better stress distribution, for same material and dimension.

Relation between experimental and non-experimental study designs. HB vaccines: a case study

PubMed Central

Jefferson, T.; Demicheli, V.

1999-01-01

STUDY OBJECTIVE: To examine the relation between experimental and non- experimental study design in vaccinology. DESIGN: Assessment of each study design's capability of testing four aspects of vaccine performance, namely immunogenicity (the capacity to stimulate the immune system), duration of immunity conferred, incidence and seriousness of side effects, and number of infections prevented by vaccination. SETTING: Experimental and non-experimental studies on hepatitis B (HB) vaccines in the Cochrane Vaccines Field Database. RESULTS: Experimental and non-experimental vaccine study designs are frequently complementary but some aspects of vaccine quality can only be assessed by one of the types of study. More work needs to be done on the relation between study quality and its significance in terms of effect size.   PMID:10326054

Feasibility study of an Integrated Program for Aerospace-vehicle Design (IPAD) system. Volume 3: Engineering creative/evaluation processes, phase 1, task 2

NASA Technical Reports Server (NTRS)

Garrocq, C. A.; Hosek, J. J.

1973-01-01

A series of functional flow charts are considered that were developed to properly identify and record the degree of participation of the disciplines considered in this feasibility study and the type of data required in the design process.

Educational Faculty Members' Perceptions on Multicultural Teacher

ERIC Educational Resources Information Center

Günay, Rafet; Aslan, Dolgun

2016-01-01

This purpose of this study is to determine how the perceptions of teaching personnel members were conceptualized through use of metaphorical images with regard to the multicultural teacher. In this study, a phenomenological design, a type of qualitative research design was used. A total of 323 teaching personnel members employed at 71 educational…

Training requirements for railroad dispatchers : objectives, syllabi and test designs

DOT National Transportation Integrated Search

1998-11-01

This report presents the results of a study to develop railroad dispatcher training objectives, syllabi for three types of training programs and test designs for the three programs. Information about current railroad dispatching methods and training ...

Solar power satellite system definition study, volume 7

NASA Technical Reports Server (NTRS)

1977-01-01

Guidelines and assumptions used in the design of a system of geosynchronous satellites for transmitting solar power to earth were discussed as well as the design evolutions of the principle types of solar power satellites and space support systems.

A new approach to children's footwear based on foot type classification.

PubMed

Mauch, M; Grau, S; Krauss, I; Maiwald, C; Horstmann, T

2009-08-01

Current shoe designs do not allow for the comprehensive 3-D foot shape, which means they are unable to reproduce the wide variability in foot morphology. Therefore, the purpose of this study was to capture these variations of children's feet by classifying them into groups (types) and thereby provide a basis for their implementation in the design of children's shoes. The feet of 2867 German children were measured using a 3-D foot scanner. Cluster analysis was then applied to classify the feet into three different foot types. The characteristics of these foot types differ regarding their volume and forefoot shape both within and between shoe sizes. This new approach is in clear contrast to previous systems, since it captures the variability of foot morphology in a more comprehensive way by using a foot typing system and therefore paves the way for the unimpaired development of children's feet. Previous shoe systems do not allow for the wide variations in foot morphology. A new approach was developed regarding different morphological foot types based on 3-D measurements relevant in shoe construction. This can be directly applied to create specific designs for children's shoes.

Complex monitoring performance and the coronary-prone Type A behavior pattern.

DOT National Transportation Integrated Search

1986-03-01

The present study examined the possible relationship of the coronary-prone Type A behavior pattern to performance of a complex monitoring task. The task was designed to functionally simulate the general task characteristics of future, highly automate...

Design of a factorial experiment with randomization restrictions to assess medical device performance on vascular tissue

PubMed Central

2011-01-01

Background Energy-based surgical scalpels are designed to efficiently transect and seal blood vessels using thermal energy to promote protein denaturation and coagulation. Assessment and design improvement of ultrasonic scalpel performance relies on both in vivo and ex vivo testing. The objective of this work was to design and implement a robust, experimental test matrix with randomization restrictions and predictive statistical power, which allowed for identification of those experimental variables that may affect the quality of the seal obtained ex vivo. Methods The design of the experiment included three factors: temperature (two levels); the type of solution used to perfuse the artery during transection (three types); and artery type (two types) resulting in a total of twelve possible treatment combinations. Burst pressures of porcine carotid and renal arteries sealed ex vivo were assigned as the response variable. Results The experimental test matrix was designed and carried out as a split-plot experiment in order to assess the contributions of several variables and their interactions while accounting for randomization restrictions present in the experimental setup. The statistical software package SAS was utilized and PROC MIXED was used to account for the randomization restrictions in the split-plot design. The combination of temperature, solution, and vessel type had a statistically significant impact on seal quality. Conclusions The design and implementation of a split-plot experimental test-matrix provided a mechanism for addressing the existing technical randomization restrictions of ex vivo ultrasonic scalpel performance testing, while preserving the ability to examine the potential effects of independent factors or variables. This method for generating the experimental design and the statistical analyses of the resulting data are adaptable to a wide variety of experimental problems involving large-scale tissue-based studies of medical or experimental device efficacy and performance. PMID:21599963

Personality Characteristics of South Korean Students with Visual Impairments Using the Myers-Briggs Type Indicator

ERIC Educational Resources Information Center

Bak, Sunhi

2012-01-01

Introduction: The study presented here was designed to determine whether there were significant differences in the frequency and preference scores of personality functions and the frequency of personality types, as measured by the Myers-Briggs Type Indicator (MBTI), by gender, school level, and level of visual function, of students with visual…

Personality and Type (but "Not" a Psychological Theory!)

ERIC Educational Resources Information Center

Holst-Larkin, Jane

2006-01-01

Word processing is part of every writer's set of competencies today, and as readers, their expectations of type have risen well beyond the old Courier font of typewriters. Yet only recently have writers had access to the thousands of different typefaces available today and had such power in making design choices. Type has been much studied and…

Using Different Types of Dictionaries for Improving EFL Reading Comprehension and Vocabulary Learning

ERIC Educational Resources Information Center

Alharbi, Majed A.

2016-01-01

This study investigated the effects of monolingual book dictionaries, popup dictionaries, and type-in dictionaries on improving reading comprehension and vocabulary learning in an EFL program. An experimental design involving four groups and a post-test was chosen for the experiment: (1) pop-up dictionary (experimental group 1); (2) type-in…

Rationale and Design of the Vitamin D and Type 2 Diabetes (D2d) Study: A Diabetes Prevention Trial

PubMed Central

Pittas, Anastassios G.; Dawson-Hughes, Bess; Rosen, Clifford J.; Ware, James H.; Knowler, William C.; Staten, Myrlene A.

2014-01-01

OBJECTIVE Observational studies suggest that vitamin D may lower the risk of type 2 diabetes. However, data from long-term trials are lacking. The Vitamin D and Type 2 Diabetes (D2d) study is a randomized clinical trial designed to examine whether a causal relationship exists between vitamin D supplementation and the development of diabetes in people at high risk for type 2 diabetes. RESEARCH DESIGN AND METHODS D2d was designed with support from a U34 planning grant from the National Institute of Diabetes and Digestive and Kidney Diseases (NIDDK). The final protocol was approved by the D2d Research Group, the data and safety monitoring board, and NIDDK. Key eligibility criteria are age ≥30 years, BMI of 24 (22.5 for Asian Americans) to 42 kg/m2, increased risk for diabetes (defined as meeting two of three glycemic criteria for prediabetes established by the American Diabetes Association [fasting glucose 100–125 mg/dL (5.5–6.9 mmol/L), 2-h postload glucose after 75-g glucose load 140–199 mg/dL (7.7–11.0 mmol/L), hemoglobin A1c 5.7–6.4% (39–46 mmol/mol)]), and no hyperparathyroidism, nephrolithiasis, or hypercalcemia. D2d participants are randomized to once-daily vitamin D3 (cholecalciferol 4,000 IU) or placebo and followed for an average of 3 years. The primary end point is time to incident diabetes as assessed by laboratory criteria during the study or by adjudication if diagnosed outside of D2d. Recruitment was initiated at the end of 2013. CONCLUSIONS D2d will test whether vitamin D supplementation is safe and effective at lowering the risk of progression to diabetes in people at high risk for type 2 diabetes. PMID:25205139

The Effect of Instructional Technology and Material Design Course to Teacher Candidates' Gaining of Technological Pedagogical Content Knowledge Competencies

ERIC Educational Resources Information Center

Tozkoparam, Süleyman Burak; Kiliç, Muhammet Emre; Usta, Ertugrul

2015-01-01

The aim of this study is to determine Technological Pedagogical Content Knowledge (TPACK) Competencies of teacher candidates in Turkish Teaching department of Mevlana (Rumi) University and the effect of Instructional Technology and Material Design (ITMD) Course on TPACK. The study is a study of quantitative type and single-group pretest-posttest…

Effect of Pedagogical Formation Program on Pre-Service History Teachers' Perceived Self-Efficacy

ERIC Educational Resources Information Center

Yazici, Fatih; Yildirim, Tercan

2017-01-01

The purpose of the present study is to investigate pre-service history teachers' perceived self-efficacy and the effect of pedagogical formation training on this perception. The study is based on a one-group pretest-posttest research design, which is a type of pre-experimental design. For the purpose of the study, in the first week of the…

Best Practices for Designing Online Learning Environments for 3D Modeling Curricula: A Delphi Study

ERIC Educational Resources Information Center

Mapson, Kathleen Harrell

2011-01-01

The purpose of this study was to develop an inventory of best practices for designing online learning environments for 3D modeling curricula. Due to the instructional complexity of three-dimensional modeling, few have sought to develop this type of course for online teaching and learning. Considering this, the study aimed to collectively aggregate…

External shading devices for energy efficient building

NASA Astrophysics Data System (ADS)

Shahdan, M. S.; Ahmad, S. S.; Hussin, M. A.

2018-02-01

External shading devices on a building façade is an important passive design strategy as they reduce solar radiation. Although studies have proven the benefits of external shading devices, many are designed solely for aesthetic purposes without fully considering its high potential to reduce solar radiation and glare. Furthermore, explorations into shading devices by the design team are mostly left too late in the design development phases. Hence, the paper looks into the effectiveness of external shading devices on a building towards more energy efficient building. The study aims to analyse the effects of various configurations of external shading devices towards the energy consumption of a case study building based on computer simulations. This study uses Building Information Modelling (BIM) through Autodesk Revit software as simulation tool. The constant variables for the simulation are the orientation of the building, types of glazing used by the building and the internal loads of the building. Whereas, the manipulated variable is the types of shading device used. The data were sorted according to the categories and translated into a chart. Analysis of the findings indicate that shading devices with different configurations show significant results in the energy consumption and the best configuration is the egg-crate shading devices. The study recommends that the consideration for shading device as a passive design strategy needs to be developed at the early stage of the building design.

Sparse PCA corrects for cell type heterogeneity in epigenome-wide association studies.

PubMed

Rahmani, Elior; Zaitlen, Noah; Baran, Yael; Eng, Celeste; Hu, Donglei; Galanter, Joshua; Oh, Sam; Burchard, Esteban G; Eskin, Eleazar; Zou, James; Halperin, Eran

2016-05-01

In epigenome-wide association studies (EWAS), different methylation profiles of distinct cell types may lead to false discoveries. We introduce ReFACTor, a method based on principal component analysis (PCA) and designed for the correction of cell type heterogeneity in EWAS. ReFACTor does not require knowledge of cell counts, and it provides improved estimates of cell type composition, resulting in improved power and control for false positives in EWAS. Corresponding software is available at http://www.cs.tau.ac.il/~heran/cozygene/software/refactor.html.

Bayesian adaptive bandit-based designs using the Gittins index for multi-armed trials with normally distributed endpoints.

PubMed

Smith, Adam L; Villar, Sofía S

2018-01-01

Adaptive designs for multi-armed clinical trials have become increasingly popular recently because of their potential to shorten development times and to increase patient response. However, developing response-adaptive designs that offer patient-benefit while ensuring the resulting trial provides a statistically rigorous and unbiased comparison of the different treatments included is highly challenging. In this paper, the theory of Multi-Armed Bandit Problems is used to define near optimal adaptive designs in the context of a clinical trial with a normally distributed endpoint with known variance. We report the operating characteristics (type I error, power, bias) and patient-benefit of these approaches and alternative designs using simulation studies based on an ongoing trial. These results are then compared to those recently published in the context of Bernoulli endpoints. Many limitations and advantages are similar in both cases but there are also important differences, specially with respect to type I error control. This paper proposes a simulation-based testing procedure to correct for the observed type I error inflation that bandit-based and adaptive rules can induce.

19 CFR 115.9 - Certifying Authorities responsibilities-containers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... may be approved for transport under seal by design type at the manufacturing stage or, otherwise, at a stage subsequent to manufacture. (b) Design type approval. The Certifying Authority to whom a container is submitted for design type approval shall examine the drawings and detailed design specifications...

19 CFR 115.9 - Certifying Authorities responsibilities-containers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... may be approved for transport under seal by design type at the manufacturing stage or, otherwise, at a stage subsequent to manufacture. (b) Design type approval. The Certifying Authority to whom a container is submitted for design type approval shall examine the drawings and detailed design specifications...

19 CFR 115.9 - Certifying Authorities responsibilities-containers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... may be approved for transport under seal by design type at the manufacturing stage or, otherwise, at a stage subsequent to manufacture. (b) Design type approval. The Certifying Authority to whom a container is submitted for design type approval shall examine the drawings and detailed design specifications...

19 CFR 115.9 - Certifying Authorities responsibilities-containers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... may be approved for transport under seal by design type at the manufacturing stage or, otherwise, at a stage subsequent to manufacture. (b) Design type approval. The Certifying Authority to whom a container is submitted for design type approval shall examine the drawings and detailed design specifications...

19 CFR 115.9 - Certifying Authorities responsibilities-containers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... may be approved for transport under seal by design type at the manufacturing stage or, otherwise, at a stage subsequent to manufacture. (b) Design type approval. The Certifying Authority to whom a container is submitted for design type approval shall examine the drawings and detailed design specifications...

Incidence and prevalence rates of diabetes mellitus in Saudi Arabia: An overview.

PubMed

Alotaibi, Abdulellah; Perry, Lin; Gholizadeh, Leila; Al-Ganmi, Ali

2017-12-01

This study aimed to report on the trends in incidence and prevalence rates of diabetes mellitus in Saudi Arabia over the last 25 years (1990-2015). A descriptive review. A systematic search was conducted for English-language, peer reviewed publications of any research design via Medline, EBSCO, PubMed and Scopus from 1990 to 2015. Of 106 articles retrieved, after removal of duplicates and quality appraisal, 8 studies were included in the review and synthesised based on study characteristics, design and findings. Studies originated from Saudi Arabia and applied a variety of research designs and tools to diagnosis diabetes. Of the 8 included studies; three reported type 1 diabetes and five on type 2 diabetes. Overall, findings indicated that the incidence and prevalence rate of diabetes is rising particularly among females, older children/adolescent and in urban areas. Further development are required to assess the health intervention, polices, guidelines, self-management programs in Saudi Arabia. Copyright © 2017. Published by Elsevier Ltd.

Study on design method and vibration reduction characteristic of floating raft with periodic structure

NASA Astrophysics Data System (ADS)

Fang, Yuanyuan; Zuo, Yanyan; Xia, Zhaowang

2018-03-01

The noise level is getting higher with the development of high-power marine power plant. Mechanical noise is one of the most obvious noise sources which not only affect equipment reliability, riding comfort and working environment, but also enlarge underwater noise. The periodic truss type device which is commonly applied in fields of aerospace and architectural is introduced to floating raft construction in ship. Four different raft frame structure are designed in the paper. The vibration transmissibility is taken as an evaluation index to measure vibration isolation effect. A design scheme with the best vibration isolation effect is found by numerical method. Plate type and the optimized periodic truss type raft frame structure are processed to experimental verify vibration isolation effect of the structure of the periodic raft. The experimental results demonstrate that the same quality of the periodic truss floating raft has better isolation effect than that of the plate type floating raft.

PSPICE controlled-source models of analogous circuit for Langevin type piezoelectric transducer

NASA Astrophysics Data System (ADS)

Chen, Yeongchin; Wu, Menqjiun; Liu, Weikuo

2007-02-01

The design and construction of wide-band and high efficiency acoustical projector has long been considered an art beyond the capabilities of many smaller groups. Langevin type piezoelectric transducers have been the most candidate of sonar array system applied in underwater communication. The transducers are fabricated, by bolting head mass and tail mass on both ends of stacked piezoelectric ceramic, to satisfy the multiple, conflicting design for high power transmitting capability. The aim of this research is to study the characteristics of Langevin type piezoelectric transducer that depend on different metal loading. First, the Mason equivalent circuit is used to model the segmented piezoelectric ceramic, then, the impedance network of tail and head masses is deduced by the Newton’s theory. To obtain the optimal solution to a specific design formulation, PSPICE controlled-source programming techniques can be applied. A valid example of the application of PSPICE models for Langevin type transducer analysis is presented and the simulation results are in good agreement with the experimental measurements.

Assessing the Validity of a Stage Measure on Physical Activity in a Population-Based Sample of Individuals with Type 1 or Type 2 Diabetes

ERIC Educational Resources Information Center

Plotnikoff, Ronald C.; Lippke, Sonia; Reinbold-Matthews, Melissa; Courneya, Kerry S.; Karunamuni, Nandini; Sigal, Ronald J.; Birkett, Nicholas

2007-01-01

This study was designed to test the validity of a transtheoretical model's physical activity (PA) stage measure with intention and different intensities of behavior in a large population-based sample of adults living with diabetes (Type 1 diabetes, n = 697; Type 2 diabetes, n = 1,614) and examine different age groups. The overall…

Practical characteristics of adaptive design in phase 2 and 3 clinical trials.

PubMed

Sato, A; Shimura, M; Gosho, M

2018-04-01

Adaptive design methods are expected to be ethical, reflect real medical practice, increase the likelihood of research and development success and reduce the allocation of patients into ineffective treatment groups by the early termination of clinical trials. However, the comprehensive details regarding which types of clinical trials will include adaptive designs remain unclear. We examined the practical characteristics of adaptive design used in clinical trials. We conducted a literature search of adaptive design clinical trials published from 2012 to 2015 using PubMed, EMBASE, and the Cochrane Central Register of Controlled Trials, with common search terms related to adaptive design. We systematically assessed the types and characteristics of adaptive designs and disease areas employed in the adaptive design trials. Our survey identified 245 adaptive design clinical trials. The number of trials by the publication year increased from 2012 to 2013 and did not greatly change afterwards. The most frequently used adaptive design was group sequential design (n = 222, 90.6%), especially for neoplasm or cardiovascular disease trials. Among the other types of adaptive design, adaptive dose/treatment group selection (n = 21, 8.6%) and adaptive sample-size adjustment (n = 19, 7.8%) were frequently used. The adaptive randomization (n = 8, 3.3%) and adaptive seamless design (n = 6, 2.4%) were less frequent. Adaptive dose/treatment group selection and adaptive sample-size adjustment were frequently used (up to 23%) in "certain infectious and parasitic diseases," "diseases of nervous system," and "mental and behavioural disorders" in comparison with "neoplasms" (<6.6%). For "mental and behavioural disorders," adaptive randomization was used in two trials of eight trials in total (25%). Group sequential design and adaptive sample-size adjustment were used frequently in phase 3 trials or in trials where study phase was not specified, whereas the other types of adaptive designs were used more in phase 2 trials. Approximately 82% (202 of 245 trials) resulted in early termination at the interim analysis. Among the 202 trials, 132 (54% of 245 trials) had fewer randomized patients than initially planned. This result supports the motive to use adaptive design to make study durations shorter and include a smaller number of subjects. We found that adaptive designs have been applied to clinical trials in various therapeutic areas and interventions. The applications were frequently reported in neoplasm or cardiovascular clinical trials. The adaptive dose/treatment group selection and sample-size adjustment are increasingly common, and these adaptations generally follow the Food and Drug Administration's (FDA's) recommendations. © 2017 John Wiley & Sons Ltd.

Design and integration of ethnography within an international behavior change HIV/sexually transmitted disease prevention trial

PubMed Central

2008-01-01

Objective To use a common ethnographic study protocol across five countries to provide data to confirm social and risk settings and risk behaviors, develop the assessment instruments, tailor the intervention, design a process evaluation of the intervention, and design an understandable informed consent process. Design Methods determined best for capturing the core data elements were selected. Standards for data collection methods were established to enable comparable implementation of the ethnographic study across the five countries. Methods The methods selected were participant observation, focus groups, open-ended interviews, and social mapping. Standards included adhering to core data elements, number of participants, mode of data collection, type of data collection instrument, number of data collectors at each type of activity, duration of each type of activity, and type of informed consent administered. Sites had discretion in selecting which methods to use to obtain specific data. Results The ethnographic studies provided input to the Trial’s methods for data collection, described social groups in the target communities, depicted sexual practices, and determined core opinion leader characteristics; thus providing information that drove the adaptation of the intervention and facilitated the selection of venues, behavioral outcomes, and community popular opinion leaders (C-POLs). Conclusion The described rapid ethnographic approach worked well across the five countries, where findings allowed local adaptation of the intervention. When introducing the C-POL intervention in new areas, local non-governmental and governmental community and health workers can use this rapid ethnographic approach to identify the communities, social groups, messages, and C-POLs best suited for local implementation. PMID:17413263

Evidence-based design and evaluation of a whole genome sequencing clinical report for the reference microbiology laboratory.

PubMed

Crisan, Anamaria; McKee, Geoffrey; Munzner, Tamara; Gardy, Jennifer L

2018-01-01

Microbial genome sequencing is now being routinely used in many clinical and public health laboratories. Understanding how to report complex genomic test results to stakeholders who may have varying familiarity with genomics-including clinicians, laboratorians, epidemiologists, and researchers-is critical to the successful and sustainable implementation of this new technology; however, there are no evidence-based guidelines for designing such a report in the pathogen genomics domain. Here, we describe an iterative, human-centered approach to creating a report template for communicating tuberculosis (TB) genomic test results. We used Design Study Methodology-a human centered approach drawn from the information visualization domain-to redesign an existing clinical report. We used expert consults and an online questionnaire to discover various stakeholders' needs around the types of data and tasks related to TB that they encounter in their daily workflow. We also evaluated their perceptions of and familiarity with genomic data, as well as its utility at various clinical decision points. These data shaped the design of multiple prototype reports that were compared against the existing report through a second online survey, with the resulting qualitative and quantitative data informing the final, redesigned, report. We recruited 78 participants, 65 of whom were clinicians, nurses, laboratorians, researchers, and epidemiologists involved in TB diagnosis, treatment, and/or surveillance. Our first survey indicated that participants were largely enthusiastic about genomic data, with the majority agreeing on its utility for certain TB diagnosis and treatment tasks and many reporting some confidence in their ability to interpret this type of data (between 58.8% and 94.1%, depending on the specific data type). When we compared our four prototype reports against the existing design, we found that for the majority (86.7%) of design comparisons, participants preferred the alternative prototype designs over the existing version, and that both clinicians and non-clinicians expressed similar design preferences. Participants showed clearer design preferences when asked to compare individual design elements versus entire reports. Both the quantitative and qualitative data informed the design of a revised report, available online as a LaTeX template. We show how a human-centered design approach integrating quantitative and qualitative feedback can be used to design an alternative report for representing complex microbial genomic data. We suggest experimental and design guidelines to inform future design studies in the bioinformatics and microbial genomics domains, and suggest that this type of mixed-methods study is important to facilitate the successful translation of pathogen genomics in the clinic, not only for clinical reports but also more complex bioinformatics data visualization software.

Evidence-based design and evaluation of a whole genome sequencing clinical report for the reference microbiology laboratory

PubMed Central

Crisan, Anamaria; McKee, Geoffrey; Munzner, Tamara

2018-01-01

Background Microbial genome sequencing is now being routinely used in many clinical and public health laboratories. Understanding how to report complex genomic test results to stakeholders who may have varying familiarity with genomics—including clinicians, laboratorians, epidemiologists, and researchers—is critical to the successful and sustainable implementation of this new technology; however, there are no evidence-based guidelines for designing such a report in the pathogen genomics domain. Here, we describe an iterative, human-centered approach to creating a report template for communicating tuberculosis (TB) genomic test results. Methods We used Design Study Methodology—a human centered approach drawn from the information visualization domain—to redesign an existing clinical report. We used expert consults and an online questionnaire to discover various stakeholders’ needs around the types of data and tasks related to TB that they encounter in their daily workflow. We also evaluated their perceptions of and familiarity with genomic data, as well as its utility at various clinical decision points. These data shaped the design of multiple prototype reports that were compared against the existing report through a second online survey, with the resulting qualitative and quantitative data informing the final, redesigned, report. Results We recruited 78 participants, 65 of whom were clinicians, nurses, laboratorians, researchers, and epidemiologists involved in TB diagnosis, treatment, and/or surveillance. Our first survey indicated that participants were largely enthusiastic about genomic data, with the majority agreeing on its utility for certain TB diagnosis and treatment tasks and many reporting some confidence in their ability to interpret this type of data (between 58.8% and 94.1%, depending on the specific data type). When we compared our four prototype reports against the existing design, we found that for the majority (86.7%) of design comparisons, participants preferred the alternative prototype designs over the existing version, and that both clinicians and non-clinicians expressed similar design preferences. Participants showed clearer design preferences when asked to compare individual design elements versus entire reports. Both the quantitative and qualitative data informed the design of a revised report, available online as a LaTeX template. Conclusions We show how a human-centered design approach integrating quantitative and qualitative feedback can be used to design an alternative report for representing complex microbial genomic data. We suggest experimental and design guidelines to inform future design studies in the bioinformatics and microbial genomics domains, and suggest that this type of mixed-methods study is important to facilitate the successful translation of pathogen genomics in the clinic, not only for clinical reports but also more complex bioinformatics data visualization software. PMID:29340235

Air Cushion Landing System Stability Study.

DTIC Science & Technology

1981-02-01

desirable. A useful result is that the analysis approach employed provides a systematic technique with which a given trunk/vehicle system may be designed ...models. Since for the 48. system analyzed the stability appears better if the side and end elements are truly isolated, the po~zibility of designing a...used to study the stability behavior appears to pro- vide a useful tool for design of systems of this type so that acceptable stability behavior is

Best Practices in the Design of Aerobic Training Programs

DTIC Science & Technology

2010-03-02

a pretest - posttest design. To determine the effect size due to training, estimates of the training response were adjusted for the type of research ...studies reviewed here employed pretest - posttest research designs. In such cases, the correlation of pretest scores with posttest scores affects the... pretest - posttest correlation (see Appendix A). was measured more than twice in some studies. When this was the case, ES was computed using the initial and

19 CFR 115.63 - Application for approval.

Code of Federal Regulations, 2012 CFR

2012-04-01

... of the design type and the serial number of the vehicle in the type series manufacturer's number; and... Procedures for Approval of Road Vehicles by Design Type § 115.63 Application for approval. Each application by a manufacturer for certification of a road vehicle by design type must include: (a) Three copies...

19 CFR 115.63 - Application for approval.

Code of Federal Regulations, 2013 CFR

2013-04-01

... of the design type and the serial number of the vehicle in the type series manufacturer's number; and... Procedures for Approval of Road Vehicles by Design Type § 115.63 Application for approval. Each application by a manufacturer for certification of a road vehicle by design type must include: (a) Three copies...

19 CFR 115.63 - Application for approval.

Code of Federal Regulations, 2014 CFR

2014-04-01

... of the design type and the serial number of the vehicle in the type series manufacturer's number; and... Procedures for Approval of Road Vehicles by Design Type § 115.63 Application for approval. Each application by a manufacturer for certification of a road vehicle by design type must include: (a) Three copies...

19 CFR 115.63 - Application for approval.

Code of Federal Regulations, 2010 CFR

2010-04-01

... of the design type and the serial number of the vehicle in the type series manufacturer's number; and... Procedures for Approval of Road Vehicles by Design Type § 115.63 Application for approval. Each application by a manufacturer for certification of a road vehicle by design type must include: (a) Three copies...

19 CFR 115.63 - Application for approval.

Code of Federal Regulations, 2011 CFR

2011-04-01

... of the design type and the serial number of the vehicle in the type series manufacturer's number; and... Procedures for Approval of Road Vehicles by Design Type § 115.63 Application for approval. Each application by a manufacturer for certification of a road vehicle by design type must include: (a) Three copies...

One Approach to the Synthesis, Design and Manufacture of Hyperboloid Gear Sets With Face Mating Gears. Part 1: Basic Theoretical and Cad Experience

NASA Astrophysics Data System (ADS)

Abadjiev, Valentin; Abadjieva, Emilia

2016-06-01

Hyperboloid gear drives with face mating gears are used to transform rotations between shafts with non-parallel and non-intersecting axes. A special case of these transmissions are Spiroid and Helicon gear drives. The classical gear drives of this type are the Archimedean ones. The objective of this study are hyperboloid gear drives with face meshing, when the pinion possesses threads of conic convolute, Archimedean and involute types, or the pinion has threads of cylindrical convolute, Archimedean and involute types. For simplicity, all three types transmis- sions with face mating gears and a conic pinion are titled Spiroid and all three types transmissions with face mating gears and a cylindrical pinion are titled Helicon. Principles of the mathematical modelling of tooth contact synthesis are discussed in this study. The presented research shows that the synthesis is realized by application of two mathematical models: pitch contact point and mesh region models. Two approaches for synthesis of the gear drives in accordance with Olivier's principles are illustrated. The algorithms and computer programs for optimization synthesis and design of the studied hyperboloid gear drives are presented.

Professional School Counseling (PSC) Publication Pattern Review: A Meta-Study of Author and Article Characteristics from the First 15 Years

ERIC Educational Resources Information Center

Erford, Bradley T.; Giguere, Monica; Glenn, Kacie; Ciarlone, Hallie

2015-01-01

Patterns of articles published in "Professional School Counseling" (PSC) from the first 15 volumes were reviewed in this meta-study. Author characteristics (e.g., sex, employment setting, nation of domicile) and article characteristics (e.g., topic, type, design, sample, sample size, participant type, statistical procedures and…

The Role of Graphic Elements in the Accurate Portrayal of Instructional Design.

ERIC Educational Resources Information Center

Branch, Robert C.; Bloom, Janet R.

This study explores the interpretation of two types of flow diagrams composed of different visual elements intended to communicate the same meaning. Using linear and cyclical diagrams, the study focused on whether, given a series of diagrams using linear elements and a series using cyclical elements, both types of visuals convey the same message…

49 CFR 229.209 - Alternative locomotive crashworthiness designs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... locomotive crashworthiness design, in detail; (3) The intended type of service for locomotives built under the proposed design; and (4) Appropriate data and analysis showing how the design either satisfies the requirements of § 229.205 for the type of locomotive or provides at least an equivalent level of safety. Types...

Considerations in the design of large space structures

NASA Technical Reports Server (NTRS)

Hedgepeth, J. M.; Macneal, R. H.; Knapp, K.; Macgillivray, C. S.

1981-01-01

Several analytical studies of topics relevant to the design of large space structures are presented. Topics covered are: the types and quantitative evaluation of the disturbances to which large Earth-oriented microwave reflectors would be subjected and the resulting attitude errors of such spacecraft; the influence of errors in the structural geometry of the performance of radiofrequency antennas; the effect of creasing on the flatness of tensioned reflector membrane surface; and an analysis of the statistics of damage to truss-type structures due to meteoroids.

The Design of Archives Buildings.

ERIC Educational Resources Information Center

Faye, Bernard

1982-01-01

Studies specific problems arising from design of archives buildings and examines three main purposes of this type of building, namely conservation, classification and restoration of archives, and the provision of access to them by administrators and research workers. Three references are listed. (Author/EJS)

Design of a modular digital computer system

NASA Technical Reports Server (NTRS)

1973-01-01

A design tradeoff study is reported for a modular spaceborne computer system that is responsive to many mission types and phases. The computer uses redundancy to maximize reliability, and multiprocessing to maximize processing capacity. Fault detection and recovery features provide optimal reliability.

Effect of cage design, supplemental posterior instrumentation and approach on primary stability of a lumbar interbody fusion - A biomechanical in vitro study.

PubMed

Schmoelz, Werner; Sandriesser, Sabrina; Loebl, Oded; Bauer, Marlies; Krappinger, Dietmar

2017-10-01

There are various techniques and approaches for lumbar interbody fusion differing in access, cage type and type of supplemental posterior instrumentation. While a transforaminal access usually includes a hemifacetectomy, the facet joint can be preserved with a more lateral extraforaminal access. The supplemental posterior instrumentation required for both fusion techniques is still debated. The purpose of the present study was to compare primary stability of the two accesses for two different cage types with none, unilateral and bilateral supplemental posterior instrumentation. Six monosegmental lumbar functional spinal units (FSUs) were included in each of the two groups, and subjected to a flexibility test. As cages, a newly designed cage was compared to a standard cage in the following states: (a) native, (b) stand-alone cage, (c) bilateral internal fixator, (d) unilateral internal fixator, (e) unilateral facetectomy+bilateral internal fixator, (f) unilateral facetectomy+unilateral internal fixator and (g) unilateral facetectomy with stand-alone cage. For comparison the range of motion was normalized to the native state and the effects of the facetectomy, cage type, and supplemental instrumentation was compared. Within the subject comparison showed a significantly higher flexibility for the unilateral facetectomy in all motion directions (p<0.001). In between subject comparison showed a significant effect of cage type on flexibility in flexion/extension (p=0.002) and lateral bending (p=0.028) but not in axial rotation (p=0.322). The type of supplemental posterior fixation had a significant effect on the flexibility in all motion directions (stand-alone>unilateral fixator>bilateral fixator). Cage design and approach type are affecting the primary stability of lumbar interbody fusion procedures while the type of posterior instrumentation is the most influencing factor. Copyright © 2017 Elsevier Ltd. All rights reserved.

Dermatoglyphic patterns in dementia of the Alzheimer type: a case-control study.

PubMed Central

Berr, C; Okra-Podrabinek, N; Feteanu, D; Taurand, S; Hervy, M P; Forette, F; Piette, F; Sebag-Lanoe, R; Alperovitch, A

1992-01-01

STUDY OBJECTIVE--The aim was to compare digital and palmar dermatoglyphics in subjects with dementia of Alzheimer type and in mentally healthy elderly controls. DESIGN--This design was a case-control study. SETTING--The study was carried out in geriatric units and retirement communities in the Paris area. PARTICIPANTS--Cases were women with clinically diagnosed Alzheimer type dementia according to DSM III-R criteria (n = 82), mainly with late onset of the disease. Controls were women aged 85 years or older without cognitive deterioration (n = 76). MEASUREMENTS AND MAIN RESULTS--Finger and palm prints obtained from both hands by the classical ink method were examined. Fingerprints were classified into four types of figures. On palms, palmar flexion creases, palmar axial triradii, true patterns of the hypothenar area, and main line terminations were described. Examinations were performed by two examiners blind to the subjects's diagnostic category. For the different patterns studied, no major differences between dementia patients and elderly controls were found. Nor was there evidence of high frequencies of features commonly observed in Down's syndrome (trisomy 21), which have previously, though sporadically, been reported. CONCLUSIONS--On one of the largest samples of Alzheimer dementia patients studied, and with evaluation blind to diagnosis, no evidence has been found that particular dermatoglyphic patterns occur like those observed in Down's syndrome, a disease which is related to dementia of the Alzheimer type. PMID:1479321

Study of Technological Improvements to Optimize Truck Configurations for Fuel Economy

DOT National Transportation Integrated Search

1975-09-01

The truck types that accounted for most of the fuel consumed were identified and modeled by computer analysis. Baseline fuel consumption was calculated for the major truck types over specific duty cycles. Design improvements in the truck were then mo...

Testing lung cancer drugs and therapies in mice

Cancer.gov

National Cancer Institute (NCI) investigators have designed a genetically engineered mouse for use in the study of human lung squamous cell carcinoma (SCC). SCC is a type of non-small cell lung carcinoma, one of the most common types of lung cancer, with

Supporting cognitive engagement in a learning-by-doing learning environment: Case studies of participant engagement and social configurations in Kitchen Science Investigators

NASA Astrophysics Data System (ADS)

Gardner, Christina M.

Learning-by-doing learning environments support a wealth of physical engagement in activities. However, there is also a lot of variability in what participants learn in each enactment of these types of environments. Therefore, it is not always clear how participants are learning in these environments. In order to design technologies to support learning in these environments, we must have a greater understanding of how participants engage in learning activities, their goals for their engagement, and the types of help they need to cognitively engage in learning activities. To gain a greater understanding of participant engagement and factors and circumstances that promote and inhibit engagement, this dissertation explores and answers several questions: What are the types of interactions and experiences that promote and /or inhibit learning and engagement in learning-by-doing learning environments? What are the types of configurations that afford or inhibit these interactions and experiences in learning-by-doing learning environments? I explore answers to these questions through the context of two enactments of Kitchen Science Investigators (KSI), a learning-by-doing learning environment where middle-school aged children learn science through cooking from customizing recipes to their own taste and texture preferences. In small groups, they investigate effects of ingredients through the design of cooking and science experiments, through which they experience and learn about chemical, biological, and physical science phenomena and concepts (Clegg, Gardner, Williams, & Kolodner, 2006). The research reported in this dissertation sheds light on the different ways participant engagement promotes and/or inhibits cognitive engagement in by learning-by-doing learning environments through two case studies. It also provides detailed descriptions of the circumstances (social, material, and physical configurations) that promote and/or inhibit participant engagement in these learning environments through cross-case analyses of these cases. Finally, it offers suggestions about structuring activities, selecting materials and resources, and designing facilitation and software-realized scaffolding in the design of these types of learning environments. These design implications focus on affording participant engagement in science content and practices learning. Overall, the case studies, cross-case analyses, and empirically-based design implications begin to bridge the gap between theory and practice in the design and implementation of these learning environments. This is demonstrated by providing detailed and explanatory examples and factors that affect how participants take up the affordances of the learning opportunities designed into these learning environments.

Quantifying the Information Habits of High School Students Engaged in Engineering Design

ERIC Educational Resources Information Center

Mentzer, Nathan; Fosmire, Michael J.

2015-01-01

This study measured the information gathering behaviors of high school students who had taken engineering design courses as they solved a design problem. The authors investigated what types of information students accessed, its quality, when it was accessed during the students' process, and if it impacted their thinking during the activity.…

Optimization of Blocked Designs in fMRI Studies

ERIC Educational Resources Information Center

Maus, Barbel; van Breukelen, Gerard J. P.; Goebel, Rainer; Berger, Martijn P. F.

2010-01-01

Blocked designs in functional magnetic resonance imaging (fMRI) are useful to localize functional brain areas. A blocked design consists of different blocks of trials of the same stimulus type and is characterized by three factors: the length of blocks, i.e., number of trials per blocks, the ordering of task and rest blocks, and the time between…

Designing occupancy studies when false-positive detections occur

USGS Publications Warehouse

Clement, Matthew

2016-01-01

1.Recently, estimators have been developed to estimate occupancy probabilities when false-positive detections occur during presence-absence surveys. Some of these estimators combine different types of survey data to improve estimates of occupancy. With these estimators, there is a tradeoff between the number of sample units surveyed, and the number and type of surveys at each sample unit. Guidance on efficient design of studies when false positives occur is unavailable. 2.For a range of scenarios, I identified survey designs that minimized the mean square error of the estimate of occupancy. I considered an approach that uses one survey method and two observation states and an approach that uses two survey methods. For each approach, I used numerical methods to identify optimal survey designs when model assumptions were met and parameter values were correctly anticipated, when parameter values were not correctly anticipated, and when the assumption of no unmodelled detection heterogeneity was violated. 3.Under the approach with two observation states, false positive detections increased the number of recommended surveys, relative to standard occupancy models. If parameter values could not be anticipated, pessimism about detection probabilities avoided poor designs. Detection heterogeneity could require more or fewer repeat surveys, depending on parameter values. If model assumptions were met, the approach with two survey methods was inefficient. However, with poor anticipation of parameter values, with detection heterogeneity, or with removal sampling schemes, combining two survey methods could improve estimates of occupancy. 4.Ignoring false positives can yield biased parameter estimates, yet false positives greatly complicate the design of occupancy studies. Specific guidance for major types of false-positive occupancy models, and for two assumption violations common in field data, can conserve survey resources. This guidance can be used to design efficient monitoring programs and studies of species occurrence, species distribution, or habitat selection, when false positives occur during surveys.

Designing a Self-Management App for Young People With Type 1 Diabetes: Methodological Challenges, Experiences, and Recommendations.

PubMed

Castensøe-Seidenfaden, Pernille; Reventlov Husted, Gitte; Teilmann, Grete; Hommel, Eva; Olsen, Birthe Susanne; Kensing, Finn

2017-10-23

Young people with type 1 diabetes often struggle to self-manage their disease. Mobile health (mHealth) apps show promise in supporting self-management of chronic conditions such as type 1 diabetes. Many health care providers become involved in app development. Unfortunately, limited information is available to guide their selection of appropriate methods, techniques, and tools for a participatory design (PD) project in health care. The aim of our study was to develop an mHealth app to support young people in self-managing type 1 diabetes. This paper presents our methodological recommendations based on experiences and reflections from a 2-year research study. A mixed methods design was used to identify user needs before designing the app and testing it in a randomized controlled trial. App design was based on qualitative, explorative, interventional, and experimental activities within an overall iterative PD approach. Several techniques and tools were used, including workshops, a mail panel, think-aloud tests, and a feasibility study. The final mHealth solution was "Young with Diabetes" (YWD). The iterative PD approach supported researchers and designers in understanding the needs of end users (ie, young people, parents, and health care providers) and their assessment of YWD, as well as how to improve app usability and feasibility. It is critical to include all end user groups during all phases of a PD project and to establish a multidisciplinary team to provide the wide range of expertise required to build a usable and useful mHealth app. Future research is needed to develop and evaluate more efficient PD techniques. Health care providers need guidance on what tools and techniques to choose for which subgroups of users and guidance on how to introduce an app to colleagues to successfully implement an mHealth app in health care organizations. These steps are important for anyone who wants to design an mHealth app for any illness. ©Pernille Castensøe-Seidenfaden, Gitte Reventlov Husted, Grete Teilmann, Eva Hommel, Birthe Susanne Olsen, Finn Kensing. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 23.10.2017.

Some design constraints required for the use of generic software in embedded systems: Packages which manage abstract dynamic structures without the need for garbage collection

NASA Technical Reports Server (NTRS)

Johnson, Charles S.

1986-01-01

The embedded systems running real-time applications, for which Ada was designed, require their own mechanisms for the management of dynamically allocated storage. There is a need for packages which manage their own internalo structures to control their deallocation as well, due to the performance implications of garbage collection by the KAPSE. This places a requirement upon the design of generic packages which manage generically structured private types built-up from application-defined input types. These kinds of generic packages should figure greatly in the development of lower-level software such as operating systems, schedulers, controllers, and device driver; and will manage structures such as queues, stacks, link-lists, files, and binary multary (hierarchical) trees. Controlled to prevent inadvertent de-designation of dynamic elements, which is implicit in the assignment operation A study was made of the use of limited private type, in solving the problems of controlling the accumulation of anonymous, detached objects in running systems. The use of deallocator prodecures for run-down of application-defined input types during deallocation operations during satellites.

Theory-driven design of hole-conducting transparent oxides

NASA Astrophysics Data System (ADS)

Trimarchi, G.; Peng, H.; Im, J.; Freeman, A. J.; Cloet, V.; Raw, A.; Poeppelmeier, K. R.; Biswas, K.; Lany, S.; Zunger, A.

2012-02-01

The design of p-type transparent conducting oxides (TCOs) aims at simultaneously achieving transparency and high hole concentration and hole conductivity in one compound. Such design principles (DPs) define a multi-objective optimization problem that is to be solved by searching a large set of compounds for optimum ones. Here, we screen a large set of ternary compounds, including Ag and Cu oxides and chalcogenides, by calculating via first-principles methods the design properties of each compound, in order to search for optimum p-type TCOs. We first select Ag3VO4 as a case study of the application of ab-initio methods to assess a compound as a candidate p-type TCO. We predict Ag3VO4 (i) to have a hole concentration of 10^14 cm-3 at room temperature, (ii) to be at the verge of transparency, and (iii) to have lower hole effective mass than the prototype p-type TCO CuAlO2. We then map the hole effective mass vs. the band gap in the selected compounds and determine those that best meet the DPs by having simultaneously minimum effective mass and a band gap large enough for transparency.

Flood type specific construction of synthetic design hydrographs

NASA Astrophysics Data System (ADS)

Brunner, Manuela I.; Viviroli, Daniel; Sikorska, Anna E.; Vannier, Olivier; Favre, Anne-Catherine; Seibert, Jan

2017-02-01

Accurate estimates of flood peaks, corresponding volumes, and hydrographs are required to design safe and cost-effective hydraulic structures. In this paper, we propose a statistical approach for the estimation of the design variables peak and volume by constructing synthetic design hydrographs for different flood types such as flash-floods, short-rain floods, long-rain floods, and rain-on-snow floods. Our approach relies on the fitting of probability density functions to observed flood hydrographs of a certain flood type and accounts for the dependence between peak discharge and flood volume. It makes use of the statistical information contained in the data and retains the process information of the flood type. The method was tested based on data from 39 mesoscale catchments in Switzerland and provides catchment specific and flood type specific synthetic design hydrographs for all of these catchments. We demonstrate that flood type specific synthetic design hydrographs are meaningful in flood-risk management when combined with knowledge on the seasonality and the frequency of different flood types.

14 CFR 21.97 - Approval of major changes in type design.

Code of Federal Regulations, 2014 CFR

2014-01-01

... must— (1) Provide substantiating data and necessary descriptive data for inclusion in the type design... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Approval of major changes in type design... TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Changes to Type Certificates § 21.97...

14 CFR 21.97 - Approval of major changes in type design.

Code of Federal Regulations, 2012 CFR

2012-01-01

... must— (1) Provide substantiating data and necessary descriptive data for inclusion in the type design... is made unless the applicant identifies in the necessary descriptive data for inclusion in the type... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Approval of major changes in type design...

Case Designs for Ill-Structured Problems: Analysis and Implications for Practice

ERIC Educational Resources Information Center

Dabbagh, Nada; Blijd, Cecily Williams

2009-01-01

This study is a third in a series of studies that examined students' information seeking and problem solving behaviors while interacting with one of two types of web-based representations of an ill-structured instructional design case: hierarchical (tree-like) and heterarchical (network-like). A Java program was used to track students' hypermedia…

Research designs and making causal inferences from health care studies.

PubMed

Flannelly, Kevin J; Jankowski, Katherine R B

2014-01-01

This article summarizes the major types of research designs used in healthcare research, including experimental, quasi-experimental, and observational studies. Observational studies are divided into survey studies (descriptive and correlational studies), case-studies and analytic studies, the last of which are commonly used in epidemiology: case-control, retrospective cohort, and prospective cohort studies. Similarities and differences among the research designs are described and the relative strength of evidence they provide is discussed. Emphasis is placed on five criteria for drawing causal inferences that are derived from the writings of the philosopher John Stuart Mill, especially his methods or canons. The application of the criteria to experimentation is explained. Particular attention is given to the degree to which different designs meet the five criteria for making causal inferences. Examples of specific studies that have used various designs in chaplaincy research are provided.

Relation between experimental and non-experimental study designs. HB vaccines: a case study.

PubMed

Jefferson, T; Demicheli, V

1999-01-01

To examine the relation between experimental and non-experimental study design in vaccinology. Assessment of each study design's capability of testing four aspects of vaccine performance, namely immunogenicity (the capacity to stimulate the immune system), duration of immunity conferred, incidence and seriousness of side effects, and number of infections prevented by vaccination. Experimental and non-experimental studies on hepatitis B (HB) vaccines in the Cochrane Vaccines Field Database. Experimental and non-experimental vaccine study designs are frequently complementary but some aspects of vaccine quality can only be assessed by one of the types of study. More work needs to be done on the relation between study quality and its significance in terms of effect size.

Design a light pattern of multiple concentric circles for LED fishing lamps using Fourier series and an energy mapping method.

PubMed

Shen, S C; Li, J S; Huang, M C

2014-06-02

Fourier series and an energy mapping method were used in this study to design a lens that produces a light pattern of multiple concentric circles (LPMCC) for a light-emitting diode (LED) fishing lamp. Fourier series were used to represent the light intensity distribution curve (LIDC) of the LPMCC light pattern. Energy mapping involves performing angular energy mapping based on the LIDCs of an LED light source and LPMCC to design a freeform lens. Type I and Type II LPMCC lenses were designed according to the phototaxis behavior of fish to create a LPMCC light pattern of interleaving light-dark zones that attracts fish shoals to stay in an area for a long period. The experimental results indicated that, in comparing the LIDCs of the Type I and II lenses with the respective simulation values, the normalized cross-correlation (NCC) value reached 96%. According to a 24-hour observation of the phototaxis of Poecilia reticulata to evaluate the effectiveness of the proposed light pattern to attract fish, when a fish shoal was habituated to a light source that emitted constant illumination light, it gradually moved away from the intense light zone and hovered around the junction of the light and dark zones. In the future, the design used in this study can be applied to LED fishing lamps to replace traditional fishing lamps.

Developmental Personality Types from Childhood to Adolescence: Associations with Parenting and Adjustment

ERIC Educational Resources Information Center

de Haan, Amaranta D.; Dekovic, Maja; van den Akker, Alithe L.; Stoltz, Sabine E. M. J.; Prinzie, Peter

2013-01-01

This study examined whether changes in children's self-reported Big Five dimensions are represented by (developmental) personality types, using a cohort-sequential design with three measurement occasions across 5 years (four cohorts, 9-12 years at T1; N = 523). Correlates of, and gender differences in, type membership were examined. Latent…

Comparing Two Types of Text-Tracking Design for Young Learners' E-Books

ERIC Educational Resources Information Center

Wang, Pei-Yu

2013-01-01

This study examined the impact of e-book text-tracking design on 4th graders' (10-year-old children's) learning of Chinese characters. The e-books used in this study were created with Adobe Flash CS 5.5 and Action Script 3.0. This study was guided by two main questions: (1) Is there any difference in learning achievement (Chinese character…

Spiral Arm Morphology of Nearby Galaxies

NASA Astrophysics Data System (ADS)

Ann, Hong Bae; Lee, Hyun-Rok

2013-06-01

We analyze the spiral structure of 1725 nearby spiral galaxies with redshift less than 0.02. We use the color images provided by the Sloan Digital Sky Survey. We determine the arm classes (grand design, multiple-arm, flocculent) and the broad Hubble types (early, intermediate, late) as well as the bar types (SA, SAB, SB) by visual inspection. We find that flocculent galaxies are mostly of late Hubble type while multiple-arm galaxies are likely to be of early Hubble type. The fractional distribution of grand design galaxies is nearly constant along the Hubble type. The dependence of arm class on bar type is not as strong as that of the Hubble type. However, there is about a three times larger fraction of grand design spirals in SB galaxies than in SA galaxies, with nearly constant fractions of multiple-arm galaxies. However, if we consider the Hubble type and bar type together, grand design spirals are more frequent in early types than in late types for SA and SAB galaxies, while they are almost constant along the Hubble type for SB galaxies. There are clear correlations between spiral structures and the local background density: strongly barred, early-type, grand design spirals favor high-density regions, while non-barred, late-type, flocculent galaxies are likely to be found in low-density regions.

Effect of keyswitch design of desktop and notebook keyboards related to key stiffness and typing force.

PubMed

Bufton, Marcia J; Marklin, Richard W; Nagurka, Mark L; Simoneau, Guy G

2006-08-15

This study aimed to compare and analyse rubber-dome desktop, spring-column desktop and notebook keyboards in terms of key stiffness and fingertip typing force. The spring-column keyboard resulted in the highest mean peak contact force (0.86N), followed by the rubber dome desktop (0.68N) and the notebook (0.59N). All these differences were statistically significant. Likewise, the spring-column keyboard registered the highest fingertip typing force and the notebook keyboard the lowest. A comparison of forces showed the notebook (rubber dome) keyboard had the highest fingertip-to-peak contact force ratio (overstrike force), and the spring-column generated the least excess force (as a ratio of peak contact force). The results of this study could aid in optimizing computer key design that could possibly reduce subject discomfort and fatigue.

Bayesian Design of Superiority Clinical Trials for Recurrent Events Data with Applications to Bleeding and Transfusion Events in Myelodyplastic Syndrome

PubMed Central

Chen, Ming-Hui; Zeng, Donglin; Hu, Kuolung; Jia, Catherine

2014-01-01

Summary In many biomedical studies, patients may experience the same type of recurrent event repeatedly over time, such as bleeding, multiple infections and disease. In this article, we propose a Bayesian design to a pivotal clinical trial in which lower risk myelodysplastic syndromes (MDS) patients are treated with MDS disease modifying therapies. One of the key study objectives is to demonstrate the investigational product (treatment) effect on reduction of platelet transfusion and bleeding events while receiving MDS therapies. In this context, we propose a new Bayesian approach for the design of superiority clinical trials using recurrent events frailty regression models. Historical recurrent events data from an already completed phase 2 trial are incorporated into the Bayesian design via the partial borrowing power prior of Ibrahim et al. (2012, Biometrics 68, 578–586). An efficient Gibbs sampling algorithm, a predictive data generation algorithm, and a simulation-based algorithm are developed for sampling from the fitting posterior distribution, generating the predictive recurrent events data, and computing various design quantities such as the type I error rate and power, respectively. An extensive simulation study is conducted to compare the proposed method to the existing frequentist methods and to investigate various operating characteristics of the proposed design. PMID:25041037

A systematic review of interventions to increase the use of standardized outcome measures by rehabilitation professionals.

PubMed

Colquhoun, Heather L; Lamontagne, Marie-Eve; Duncan, Edward As; Fiander, Michelle; Champagne, Catherine; Grimshaw, Jeremy M

2017-03-01

To determine the types and effectiveness of interventions to increase the knowledge about, attitudes towards, and use of standardized outcome measures in rehabilitation professionals. An electronic search using Medline, EMBASE, PsycINFO, CINAHL, Ergonomics Abstracts, Sports Discus. The search is current to February 2016. All study designs testing interventions were included as were all provider and patient types. Two reviewers independently conducted a title and abstract review, followed by a full-text review. Two reviewers independently extracted a priori variables and used consensus for disagreements. Quality assessment was conducted using the Assessment of Quantitative Studies published by the Effective Public Health Practice Group. We identified 11 studies involving at least 1200 providers. Nine of the studies showed improvements in outcome measure use rates but only three of these studies used an experimental or quasi-experimental design. Eight of the studies used an educational approach in the intervention and three used audit and feedback. Poor intervention description and quality of studies limited recommendations. Increased attention to testing interventions focused on known barriers, matched to behavior change techniques, and with stronger designs is warranted.

Quantification of smoothness index differences related to long-term pavement performance equipment type

DOT National Transportation Integrated Search

2005-09-01

The Long-Term Pavement Performance (LTPP) program was designed as a 20-year study of pavement performance. A major data collection effort at LTPP test sections is the collection of longitudinal profile data using inertial profilers. Three types of in...

A Nomographic Methodology for Use in Performance Trade-Off Studies of Parabolic Dish Solar Power Modules

NASA Technical Reports Server (NTRS)

Selcuk, M. K.; Fujita, T.

1984-01-01

A simple graphical method was developed to undertake technical design trade-off studies for individual parabolic dish models comprising a two-axis tracking parabolic dish with a cavity receiver and power conversion assembly at the focal point. The results of these technical studies are then used in performing the techno-economic analyses required for determining appropriate subsystem sizing. Selected graphs that characterize the performance of subsystems within the module were arranged in the form of a nomogram that would enable an investigator to carry out several design trade-off studies. Key performance parameters encompassed in the nomogram include receiver losses, intercept factor, engine rating, and engine efficiency. Design and operation parameters such as concentrator size, receiver type (open or windowed aperture), receiver aperture size, operating temperature of the receiver and engine, engine partial load characteristics, concentrator slope error, and the type of reflector surface, are also included in the graphical solution. Cost considerations are not included.

Function-Oriented Synthesis: How to Design Simplified Analogues of Antibacterial Nucleoside Natural Products?

PubMed

Ichikawa, Satoshi

2016-06-01

It is important to pursue function-oriented synthesis (FOS), a strategy for the design of less structurally complex targets with comparable or superior activity that can be made in a practical manner, because compared to synthetic drugs, many biologically relevant natural products possess large and complex chemical structures that may restrict chemical modifications in a structure-activity relationship study. In this account, we describe recent efforts to simplify complex nucleoside natural products including caprazamycins. Considering the structure-activity relationship study with several truncated analogues, three types of simplified derivatives, namely, oxazolidine, isoxazolidine, and lactam-fused isoxazolidine-containing uridine derivatives, were designed and efficiently synthesized. These simplified derivatives have exhibited promising antibacterial activities. A significant feature of our studies is the rational and drastic simplification of the molecular architecture of caprazamycins. This study provides a novel strategy for the development of a new type of antibacterial agent effective against drug-resistant bacteria. © 2016 The Chemical Society of Japan & Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Accounting for Relatedness in Family Based Genetic Association Studies

PubMed Central

McArdle, P.F.; O’Connell, J.R.; Pollin, T.I.; Baumgarten, M.; Shuldiner, A.R.; Peyser, P.A.; Mitchell, B.D.

2007-01-01

Objective Assess the differences in point estimates, power and type 1 error rates when accounting for and ignoring family structure in genetic tests of association. Methods We compare by simulation the performance of analytic models using variance components to account for family structure and regression models that ignore relatedness for a range of possible family based study designs (i.e., sib pairs vs. large sibships vs. nuclear families vs. extended families). Results Our analyses indicate that effect size estimates and power are not significantly affected by ignoring family structure. Type 1 error rates increase when family structure is ignored, as density of family structures increases, and as trait heritability increases. For discrete traits with moderate levels of heritability and across many common sampling designs, type 1 error rates rise from a nominal 0.05 to 0.11. Conclusion Ignoring family structure may be useful in screening although it comes at a cost of a increased type 1 error rate, the magnitude of which depends on trait heritability and pedigree configuration. PMID:17570925

Design of a Prototype Positive Ion Source with Slit Aperture Type Extraction System

NASA Astrophysics Data System (ADS)

Sharma, Sanjeev K.; Vattilli, Prahlad; Choksi, Bhargav; Punyapu, Bharathi; Sidibomma, Rambabu; Bonagiri, Sridhar; Aggrawal, Deepak; Baruah, Ujjwal K.

2017-04-01

The neutral beam injector group at IPR aims at developing an experimental positive ion source capable of delivering H+ ion beam having energy of 30 - 40 keV and carrying an ion beam current of 5 A. The slit aperture based extraction system is chosen for extracting and accelerating the ions so as to achieve low divergence of the ion beam (< 0.5°). For producing H+ ions a magnetic multi-pole bucket type plasma chamber is selected. We calculated the magnetic field due to cusp magnets and trajectories (orbits) of the primary electrons to investigate the two magnetic configurations i.e. line cusp and checker board. Numerical simulation is also carried out by using OPERA-3D to study the characteristic performance of the slit aperture type extraction-acceleration system. We report here the results of the studies carried out on various aspects of the design of the slit aperture type positive ion source.

Usage Position and Virtual Keyboard Design Affect Upper-Body Kinematics, Discomfort, and Usability during Prolonged Tablet Typing

PubMed Central

Lin, Ming-I Brandon; Hong, Ruei-Hong; Chang, Jer-Hao; Ke, Xin-Min

2015-01-01

Purpose The increase in tablet usage allows people to perform computer work in non-traditional office environments. The aim of this study was to assess the effects of changes in tablet keyboard design on postures of the upper extremities and neck, discomfort, and usability under different usage positions during prolonged touch-typing. Methods Eighteen healthy participants familiar with touch-screen devices were randomized into three usage positions (desk, lap, and bed) and completed six, 60-minute typing sessions using three virtual keyboard designs (standard, wide, split). Electrogoniometers continuously measured the postures of the wrists, elbow, and neck. Body discomfort and system usability were evaluated by questionnaires before and immediately after each typing session. Results Separate linear mixed effects models on various postural measures and subjective ratings are conducted with usage position as the between-subject factors, keyboard design and typing duration as the with-in subject factors were conducted. Using the tablet in bed led to more extended wrists but a more natural elbow flexion than the desk position. The angled split virtual keyboard significantly reduced the extent of wrist ulnar deviation than the keyboard with either standard or wide design. However, little difference was observed across the usage position and keyboard design. When the postural data were compared between the middle and end of typing sessions, the wrists, elbow, and neck all exhibited a substantially increased range of joint movements (13% to 38%). The discomfort rating also increased significantly over time in every upper body region investigated. Additionally, the split keyboard design received a higher usability rating in the bed position, whereas participants had more satisfactory experience while using the wide keyboard in the traditional desk setting. Conclusions Prolonged use of tablets in non-traditional office environments may result in awkward postures in the upper body that may expose users to greater risks of developing musculoskeletal symptoms. Adequate virtual keyboard designs show the potential to alleviate some postural effects and improve the user experience without changing the tablet form factors. PMID:26629989

Evaluation of marginal fit of two all-ceramic copings with two finish lines

PubMed Central

Subasi, Gulce; Ozturk, Nilgun; Inan, Ozgur; Bozogullari, Nalan

2012-01-01

Objectives: This in-vitro study investigated the marginal fit of two all-ceramic copings with 2 finish line designs. Methods: Forty machined stainless steel molar die models with two different margin designs (chamfer and rounded shoulder) were prepared. A total of 40 standardized copings were fabricated and divided into 4 groups (n=10 for each finish line-coping material). Coping materials tested were IPS e.max Press and Zirkonzahn; luting agent was Variolink II. Marginal fit was evaluated after cementation with a stereomicroscope (Leica MZ16). Two-way analysis of variance and Tukey-HSD test were performed to assess the influence of each finish line design and ceramic type on the marginal fit of 2 all-ceramic copings (α =.05). Results: Two-way analysis of variance revealed no statistically significant differences for marginal fit relative to finish lines (P=.362) and ceramic types (P=.065). Conclusion: Within the limitations of this study, both types of all-ceramic copings demonstrated that the mean marginal fit was considered acceptable for clinical application (⩽120 μm). PMID:22509119

Template-based de novo design for type II kinase inhibitors and its extented application to acetylcholinesterase inhibitors.

PubMed

Su, Bo-Han; Huang, Yi-Syuan; Chang, Chia-Yun; Tu, Yi-Shu; Tseng, Yufeng J

2013-10-31

There is a compelling need to discover type II inhibitors targeting the unique DFG-out inactive kinase conformation since they are likely to possess greater potency and selectivity relative to traditional type I inhibitors. Using a known inhibitor, such as a currently available and approved drug or inhibitor, as a template to design new drugs via computational de novo design is helpful when working with known ligand-receptor interactions. This study proposes a new template-based de novo design protocol to discover new inhibitors that preserve and also optimize the binding interactions of the type II kinase template. First, sorafenib (Nexavar) and nilotinib (Tasigna), two type II inhibitors with different ligand-receptor interactions, were selected as the template compounds. The five-step protocol can reassemble each drug from a large fragment library. Our procedure demonstrates that the selected template compounds can be successfully reassembled while the key ligand-receptor interactions are preserved. Furthermore, to demonstrate that the algorithm is able to construct more potent compounds, we considered kinase inhibitors and other protein dataset, acetylcholinesterase (AChE) inhibitors. The de novo optimization was initiated using a template compound possessing a less than optimal activity from a series of aminoisoquinoline and TAK-285 inhibiting type II kinases, and E2020 derivatives inhibiting AChE respectively. Three compounds with greater potency than the template compound were discovered that were also included in the original congeneric series. This template-based lead optimization protocol with the fragment library can help to design compounds with preferred binding interactions of known inhibitors automatically and further optimize the compounds in the binding pockets.

Structural Materials and Fuels for Space Power Plants

NASA Technical Reports Server (NTRS)

Bowman, Cheryl; Busby, Jeremy; Porter, Douglas

2008-01-01

A fission reactor combined with Stirling convertor power generation is one promising candidate in on-going Fission Surface Power (FSP) studies for future lunar and Martian bases. There are many challenges for designing and qualifying space-rated nuclear power plants. In order to have an affordable and sustainable program, NASA and DOE designers want to build upon the extensive foundation in nuclear fuels and structural materials. This talk will outline the current Fission Surface Power program and outline baseline design options for a lunar power plant with an emphasis on materials challenges. NASA first organized an Affordable Fission Surface Power System Study Team to establish a reference design that could be scrutinized for technical and fiscal feasibility. Previous papers and presentations have discussed this study process in detail. Considerations for the reference design included that no significant nuclear technology, fuels, or material development were required for near term use. The desire was to build upon terrestrial-derived reactor technology including conventional fuels and materials. Here we will present an overview of the reference design, Figure 1, and examine the materials choices. The system definition included analysis and recommendations for power level and life, plant configuration, shielding approach, reactor type, and power conversion type. It is important to note that this is just one concept undergoing refinement. The design team, however, understands that materials selection and improvement must be an integral part of the system development.

The conditional power of randomization tests for single-case effect sizes in designs with randomized treatment order: A Monte Carlo simulation study.

PubMed

Michiels, Bart; Heyvaert, Mieke; Onghena, Patrick

2018-04-01

The conditional power (CP) of the randomization test (RT) was investigated in a simulation study in which three different single-case effect size (ES) measures were used as the test statistics: the mean difference (MD), the percentage of nonoverlapping data (PND), and the nonoverlap of all pairs (NAP). Furthermore, we studied the effect of the experimental design on the RT's CP for three different single-case designs with rapid treatment alternation: the completely randomized design (CRD), the randomized block design (RBD), and the restricted randomized alternation design (RRAD). As a third goal, we evaluated the CP of the RT for three types of simulated data: data generated from a standard normal distribution, data generated from a uniform distribution, and data generated from a first-order autoregressive Gaussian process. The results showed that the MD and NAP perform very similarly in terms of CP, whereas the PND performs substantially worse. Furthermore, the RRAD yielded marginally higher power in the RT, followed by the CRD and then the RBD. Finally, the power of the RT was almost unaffected by the type of the simulated data. On the basis of the results of the simulation study, we recommend at least 20 measurement occasions for single-case designs with a randomized treatment order that are to be evaluated with an RT using a 5% significance level. Furthermore, we do not recommend use of the PND, because of its low power in the RT.

The "Global Heritage Stone Resource": Past, Present and Future

NASA Astrophysics Data System (ADS)

Cooper, Barry

2013-04-01

The "Global Heritage Stone Resource" designation arose in 2007 as a suggested mechanism to enhance international recognition of famous dimension stones. There were also many aspects of dimension stone study that had no formal recognition in mainstream geology and which could be recognised in a formal geological sense via an internationally acceptable geological standard. Such a standard could also receive recognition by other professionals and the wider community. From the start, it was appreciated that active quarrying would an important aspect of the designation so a designation different to any other standard was needed. Also the project was linked to the long-established Commission C-10 Building Stone and Ornamental Rocks of the International Association of Engineering Geology and the Environment (IAEG C-10). Since 2007, the "Global Heritage Stone Resource" (GHSR) proposal has evolved in both in stature and purpose due to an increasing number of interested international correspondents that were actively sought via conference participation. The "English Stone Forum" in particular was pursuing similar aims and was quick to advise that English dimension stone types were being recognised as having international, national or regional importance. Furthermore the proposed designation was suggested as to having significant value in safeguarding designated stone types whilst also providing a potential mechanism in preventing heritage stone replacement by cheap substitutes. During development it also became apparent that stone types having practical applications such as roofing slates and millstones or even stone types utilised by prehistoric man can also be recognised by the new designation. The heritage importance of architects was also recognised. Most importantly an international network evolved, primarily including geologists, that now seems to be the largest international grouping of dimension stone professionals. This has assisted the project to affiliate with the International Union of Geological Sciences (IUGS) in 2011 as its Heritage Stone Task Group (HSTG). The future is likely to hold further surprises. There could be benefits in establishing a permanent organisation or "Commission" within IUGS. There may also be value in preparing and maintaining an "International Guide to Heritage Stone Designation" that considers, not only those stone types that have international significance, but also those of national, regional and local importance. It is now considered that all dimension stone types may be considered a "potential heritage stone". Publications of all types that describe, discuss and promote nominated stone types will be beneficial. For good administration of the designation, the current HSTG "Terms of Reference" will likely require revision. For the immediate future, the major effort should focus on preparing and approving GHSR nominations. Over time the focus will likely move onto promoting community recognition of the designation, protecting recognised GHSRs and revising the existing heritage status of designated stones.

A G Protein-biased Designer G Protein-coupled Receptor Useful for Studying the Physiological Relevance of Gq/11-dependent Signaling Pathways.

PubMed

Hu, Jianxin; Stern, Matthew; Gimenez, Luis E; Wanka, Lizzy; Zhu, Lu; Rossi, Mario; Meister, Jaroslawna; Inoue, Asuka; Beck-Sickinger, Annette G; Gurevich, Vsevolod V; Wess, Jürgen

2016-04-08

Designerreceptorsexclusivelyactivated by adesignerdrug (DREADDs) are clozapine-N-oxide-sensitive designer G protein-coupled receptors (GPCRs) that have emerged as powerful novel chemogenetic tools to study the physiological relevance of GPCR signaling pathways in specific cell types or tissues. Like endogenous GPCRs, clozapine-N-oxide-activated DREADDs do not only activate heterotrimeric G proteins but can also trigger β-arrestin-dependent (G protein-independent) signaling. To dissect the relative physiological relevance of G protein-mediatedversusβ-arrestin-mediated signaling in different cell types or physiological processes, the availability of G protein- and β-arrestin-biased DREADDs would be highly desirable. In this study, we report the development of a mutationally modified version of a non-biased DREADD derived from the M3muscarinic receptor that can activate Gq/11with high efficacy but lacks the ability to interact with β-arrestins. We also demonstrate that this novel DREADD is activein vivoand that cell type-selective expression of this new designer receptor can provide novel insights into the physiological roles of G protein (Gq/11)-dependentversusβ-arrestin-dependent signaling in hepatocytes. Thus, this novel Gq/11-biased DREADD represents a powerful new tool to study the physiological relevance of Gq/11-dependent signaling in distinct tissues and cell types, in the absence of β-arrestin-mediated cellular effects. Such studies should guide the development of novel classes of functionally biased ligands that show high efficacy in various pathophysiological conditions but display a reduced incidence of side effects. © 2016 by The American Society for Biochemistry and Molecular Biology, Inc.

The Impact of Listening Strategy Training on the Meta-Cognitive Listening Strategies Awareness of Different Learner Types

ERIC Educational Resources Information Center

Zarrabi, Fatemeh

2016-01-01

The present study investigated the effectiveness of listening strategy instruction on the metacognitive listening strategies awareness of different EFL learner types (LTs). To achieve this goal, 150 EFL students took part in the study and were taught based on a guided lesson plan regarding listening strategies and a pre-test/post-test design was…

Sickness Absenteeism Rate in Iranian Schools during the 2009 Epidemic of Type a Influenza

ERIC Educational Resources Information Center

Pourabbasi, Ata; Shirvani, Mahbubeh Ebrahimnegad; Khashayar, Patricia

2012-01-01

Influenza pandemic was a global event in 2009 and intraschool transmission was its main spread method. The present study was designed to evaluate the absenteeism rate during the type A influenza epidemic. Four hundred and eight students from both a guidance school and high school in the Iranian capital were recruited in this retrospective study.…

The Social Network, Socioeconomic Background, and School Type of Adolescent Smokers

ERIC Educational Resources Information Center

Huisman, Chip; Bruggeman, Jeroen

2012-01-01

The aim of this study is to examine the role of Dutch second grade (age 13-14) high school peer networks in mediating socioeconomic background and school type effects on smoking behavior. This study is based on a longitudinal design with two measurement waves at five different high schools, of the complete networks of second grader friendships, as…

Reply to Commentary: "Are HIV-Infected Candidates for Participation in Risky Cure-Related Studies Otherwise Healthy?"

PubMed

Dubé, Karine; Sylla, Laurie; Dee, Lynda

2018-02-01

We respond to Eyal et al.'s commentary focusing on how people living with HIV participating in HIV cure-related studies are defined. We argue that the types of participants enrolled in research cannot be dissociated from the study interventions, the types of anticipated risks, and the background standard of care. As the field of HIV cure research advances, more nuance and granularity will be needed to define research criteria and acceptable risk/benefit ratios for cure study participants, as well as specific tiered protocol designs that serve to protect various participant populations from untoward risks, especially in very early phase research with interventions known to have potentially serious toxicities. We highlight key lessons from the ACTIVATE study involving a latency-reversing agent, Panobinostat, for HIV cure study design involving "otherwise healthy volunteers".

Modified method to improve the design of Petlyuk distillation columns.

PubMed

Zapiain-Salinas, Javier G; Barajas-Fernández, Juan; González-García, Raúl

2014-01-01

A response surface analysis was performed to study the effect of the composition and feeding thermal conditions of ternary mixtures on the number of theoretical stages and the energy consumption of Petlyuk columns. A modification of the pre-design algorithm was necessary for this purpose. The modified algorithm provided feasible results in 100% of the studied cases, compared with only 8.89% for the current algorithm. The proposed algorithm allowed us to attain the desired separations, despite the type of mixture and the operating conditions in the feed stream, something that was not possible with the traditional pre-design method. The results showed that the type of mixture had great influence on the number of stages and on energy consumption. A higher number of stages and a lower consumption of energy were attained with mixtures rich in the light component, while higher energy consumption occurred when the mixture was rich in the heavy component. The proposed strategy expands the search of an optimal design of Petlyuk columns within a feasible region, which allow us to find a feasible design that meets output specifications and low thermal loads.

Functional and aesthetic approach to design of bird feeders

NASA Astrophysics Data System (ADS)

Kukhta, A.; Kukhta, M.

2015-10-01

Anthropogenic objects which load the urban environment negatively affects the human psyche. The alternative is attracting elements of the natural environment into urban environment, of which some of the most frequently identified are birds. Attracting birds in the city is possible by means of feeders and artificial nests, however, both must be harmonious. The aim of this study is to analyze the essential functions of the feeders, and their integration into the environmental design and development of the city. On this basis an original feeder which is convenient for use by birds and attracts people's attention is developed. In this paper we apply comparative analysis of different types of feeders encountered in Tomsk, bird watching, and evaluate usability of different types of feeders from the position of their convenience both for birds and human beings. Historical-cultural analysis for determining features of the architectural and environmental design of Tomsk is carried out, the method allows us to solve engineering problems. In this study the feeder convenient for bird use is designed which blends harmoniously with the architectural design of Tomsk.

Targeted proteins for diabetes drug design

NASA Astrophysics Data System (ADS)

Doan Trang Nguyen, Ngoc; Thi Le, Ly

2012-03-01

Type 2 diabetes mellitus is a common metabolism disorder characterized by high glucose in the bloodstream, especially in the case of insulin resistance and relative insulin deficiency. Nowadays, it is very common in middle-aged people and involves such dangerous symptoms as increasing risk of stroke, obesity and heart failure. In Vietnam, besides the common treatment of insulin injection, some herbal medication is used but no unified optimum remedy for the disease yet exists and there is no production of antidiabetic drugs in the domestic market yet. In the development of nanomedicine at the present time, drug design is considered as an innovative tool for researchers to study the mechanisms of diseases at the molecular level. The aim of this article is to review some common protein targets involved in type 2 diabetes, offering a new idea for designing new drug candidates to produce antidiabetic drugs against type 2 diabetes for Vietnamese people.

InAlAs photovoltaic cell design for high device efficiency

DOE PAGES

Smith, Brittany L.; Bittner, Zachary S.; Hellstroem, Staffan D.; ...

2017-04-17

This study presents a new design for a single-junction InAlAs solar cell, which reduces parasitic absorption losses from the low band-gap contact layer while maintaining a functional window layer by integrating a selective etch stop. The etch stop is then removed prior to depositing an anti-reflective coating. The final cell had a 17.9% efficiency under 1-sun AM1.5 with an anti-reflective coating. Minority carrier diffusion lengths were extracted from external quantum efficiency data using physics-based device simulation software yielding 170 nm in the n-type emitter and 4.6 um in the p-type base, which is more than four times the diffusion lengthmore » previously reported for a p-type InAlAs base. In conclusion, this report represents significant progress towards a high-performance InAlAs top cell for a triple-junction design lattice-matched to InP.« less

Engineering report. Part 1: NASA wheel air seal development for space shuttle type environmental requirements

NASA Technical Reports Server (NTRS)

1973-01-01

The sealing techniques are studied for existing aircraft wheel-tire designs to meet the hard vacuum .00001 torr and cold temperature -65 F requirements of space travel. The investigation covers the use of existing wheel seal designs.

Predicting Risk of Type 2 Diabetes Mellitus with Genetic Risk Models on the Basis of Established Genome-wide Association Markers: A Systematic Review

PubMed Central

Bao, Wei; Hu, Frank B.; Rong, Shuang; Rong, Ying; Bowers, Katherine; Schisterman, Enrique F.; Liu, Liegang; Zhang, Cuilin

2013-01-01

This study aimed to evaluate the predictive performance of genetic risk models based on risk loci identified and/or confirmed in genome-wide association studies for type 2 diabetes mellitus. A systematic literature search was conducted in the PubMed/MEDLINE and EMBASE databases through April 13, 2012, and published data relevant to the prediction of type 2 diabetes based on genome-wide association marker–based risk models (GRMs) were included. Of the 1,234 potentially relevant articles, 21 articles representing 23 studies were eligible for inclusion. The median area under the receiver operating characteristic curve (AUC) among eligible studies was 0.60 (range, 0.55–0.68), which did not differ appreciably by study design, sample size, participants’ race/ethnicity, or the number of genetic markers included in the GRMs. In addition, the AUCs for type 2 diabetes did not improve appreciably with the addition of genetic markers into conventional risk factor–based models (median AUC, 0.79 (range, 0.63–0.91) vs. median AUC, 0.78 (range, 0.63–0.90), respectively). A limited number of included studies used reclassification measures and yielded inconsistent results. In conclusion, GRMs showed a low predictive performance for risk of type 2 diabetes, irrespective of study design, participants’ race/ethnicity, and the number of genetic markers included. Moreover, the addition of genome-wide association markers into conventional risk models produced little improvement in predictive performance. PMID:24008910

Development of high intensity linear accelerator for heavy ion inertial fusion driver

NASA Astrophysics Data System (ADS)

Lu, Liang; Hattori, Toshiyuki; Hayashizaki, Noriyosu; Ishibashi, Takuya; Okamura, Masahiro; Kashiwagi, Hirotsugu; Takeuchi, Takeshi; Zhao, Hongwei; He, Yuan

2013-11-01

In order to verify the direct plasma injection scheme (DPIS), an acceleration test was carried out in 2001 using a radio frequency quadrupole (RFQ) heavy ion linear accelerator (linac) and a CO2-laser ion source (LIS) (Okamura et al., 2002) [1]. The accelerated carbon beam was observed successfully and the obtained current was 9.22 mA for C4+. To confirm the capability of the DPIS, we succeeded in accelerating 60 mA carbon ions with the DPIS in 2004 (Okamura et al., 2004; Kashiwagi and Hattori, 2004) [2,3]. We have studied a multi-beam type RFQ with an interdigital-H (IH) cavity that has a power-efficient structure in the low energy region. We designed and manufactured a two-beam type RFQ linac as a prototype for the multi-beam type linac; the beam acceleration test of carbon beams showed that it successfully accelerated from 5 keV/u up to 60 keV/u with an output current of 108 mA (2×54 mA/channel) (Ishibashi et al., 2011) [4]. We believe that the acceleration techniques of DPIS and the multi-beam type IH-RFQ linac are technical breakthroughs for heavy-ion inertial confinement fusion (HIF). The conceptual design of the RF linac with these techniques for HIF is studied. New accelerator-systems using these techniques for the HIF basic experiment are being designed to accelerate 400 mA carbon ions using four-beam type IH-RFQ linacs with DPIS. A model with a four-beam acceleration cavity was designed and manufactured to establish the proof of principle (PoP) of the accelerator.

Identifying Effective Treatments from a Brief Experimental Analysis: Using a Single-Case Design Elements To Aid Decision Making.

ERIC Educational Resources Information Center

Martens, Brian K.; Eckert, Tanya L.; Bradley, Tracy A.; Ardoin, Scott P.

1999-01-01

Discusses the benefits of using brief experimental analysis to aid in treatment selection, identifies the forms of treatment that are most appropriate for this type of analysis, and describes key design elements for comparing treatments. Presents a study demonstrating the use of these design elements to identify an effective intervention for two…

Design and Study of a Low-Cost Laboratory Model Digital Wind Power Meter

ERIC Educational Resources Information Center

Radhakrishnan, Rugmini; Karthika, S.

2010-01-01

A vane-type low-cost laboratory model anemometer cum power meter is designed and constructed for measuring low wind energy created from accelerating fluids. The constructed anemometer is a device which records the electrical power obtained by the conversion of wind power using a wind sensor coupled to a DC motor. It is designed for its…

Treatment of Comorbid Attention-Deficit/Hyperactivity Disorder and Anxiety in Children : A Multiple Baseline Design Analysis

ERIC Educational Resources Information Center

Jarrett, Matthew A.; Ollendick, Thomas H.

2012-01-01

Objective: The present study evaluated a 10-week psychosocial treatment designed specifically for children with attention-deficit/hyperactivity disorder (ADHD) and a comorbid anxiety disorder. Method: Using a nonconcurrent multiple baseline design, the authors treated 8 children ages 8-12 with ADHD, combined type, and at least 1 of 3 major anxiety…

Cryogenic Propellant Management Device: Conceptual Design Study

NASA Technical Reports Server (NTRS)

Wollen, Mark; Merino, Fred; Schuster, John; Newton, Christopher

2010-01-01

Concepts of Propellant Management Devices (PMDs) were designed for lunar descent stage reaction control system (RCS) and lunar ascent stage (main and RCS propulsion) missions using liquid oxygen (LO2) and liquid methane (LCH4). Study ground rules set a maximum of 19 days from launch to lunar touchdown, and an additional 210 days on the lunar surface before liftoff. Two PMDs were conceptually designed for each of the descent stage RCS propellant tanks, and two designs for each of the ascent stage main propellant tanks. One of the two PMD types is a traditional partial four-screen channel device. The other type is a novel, expanding volume device which uses a stretched, flexing screen. It was found that several unique design features simplified the PMD designs. These features are (1) high propellant tank operating pressures, (2) aluminum tanks for propellant storage, and (3) stringent insulation requirements. Consequently, it was possible to treat LO2 and LCH4 as if they were equivalent to Earth-storable propellants because they would remain substantially subcooled during the lunar mission. In fact, prelaunch procedures are simplified with cryogens, because any trapped vapor will condense once the propellant tanks are pressurized in space.

Enhancement of thermoelectric power factor of Sr2CoMoO6 double perovskite by annealing in reducing atmosphere

NASA Astrophysics Data System (ADS)

Tanwar, Khagesh; Saxena, Mandvi; Maiti, Tanmoy

2017-10-01

In general, n-type thermoelectric materials are rather difficult to design. This study particularly pivoted on designing potential environmentally benign oxides based n-type thermoelectric material. We synthesized Sr2CoMoO6 (SCMO) polycrystalline ceramics via the solid-state synthesis route. XRD, SEM, and thermoelectric measurements were carried out for phase constitution, microstructure analysis, and to determine its potential for thermoelectric applications. As-sintered SCMO sample showed an insulator like behavior till 640 °C after which it exhibited an n-type non-degenerate semiconductor behavior followed by a p-n type conduction switching. To stabilize a high temperature n-type behavior, annealing of SCMO in reducing atmosphere (H2) at 1000 °C was carried out. After annealing, the SCMO demonstrated an n-type semiconductor behavior throughout the temperature range of measurement. The electrical conductivity (σ) and the power factor (S2σ) were found to be increased manifold in the annealed SCMO double perovskite.

Decreasing the time to defibrillation: a comparative study of defibrillator electrode designs.

PubMed

Adams, Bruce D; Easty, David M; Stuffel, Elaine; Hartman, Irma

2005-08-01

Time to defibrillation (T(defib)) is the most important modifiable factor affecting survival from cardiac arrest. Mortality increases by approximately 7--10% for each minute of defibrillation delay. The purpose of this study was to determine whether defibrillator electrode design complexity affects T(defib). This was a randomized sequential design study utilizing a standardized ventricular fibrillation cardiac arrest model for CPR mannequins. We evaluated two common types of defibrillator electrode models: a single connector design and a double connector design that requires an adaptor. We compared the time required by cardiac arrest team leaders to apply the two types of defibrillator electrodes to a manikin, connect them to a defibrillator, and then deliver a first defibrillatory shock. The primary outcome was time to defibrillation. The secondary outcome was difficulty of application as perceived by the physician participants on a 10 cm visual analog scale. Thirty-two residents performed a sequential assessment of both electrodes. The average T(defib) for the double connector model was 42.9s longer than that of the single connector model (87.5s versus 44.6s, p<0.001). As evaluated by the study participants, the single connector model was significantly easier to apply then the double connector model (1.3 cm versus 4.4 cm, p<0.001). The single connector defibrillator electrode design was associated with a significantly shorter T(defib) than the double connector design. It also was judged to be easier to apply in this model. Ergonomic design of defibrillator electrodes can significantly impact time to defibrillation.

The effects of model composition design choices on high-fidelity simulations of motoneuron recruitment and firing behaviors

NASA Astrophysics Data System (ADS)

Allen, John M.; Elbasiouny, Sherif M.

2018-06-01

Objective. Computational models often require tradeoffs, such as balancing detail with efficiency; yet optimal balance should incorporate sound design features that do not bias the results of the specific scientific question under investigation. The present study examines how model design choices impact simulation results. Approach. We developed a rigorously-validated high-fidelity computational model of the spinal motoneuron pool to study three long-standing model design practices which have yet to be examined for their impact on motoneuron recruitment, firing rate, and force simulations. The practices examined were the use of: (1) generic cell models to simulate different motoneuron types, (2) discrete property ranges for different motoneuron types, and (3) biological homogeneity of cell properties within motoneuron types. Main results. Our results show that each of these practices accentuates conditions of motoneuron recruitment based on the size principle, and minimizes conditions of mixed and reversed recruitment orders, which have been observed in animal and human recordings. Specifically, strict motoneuron orderly size recruitment occurs, but in a compressed range, after which mixed and reverse motoneuron recruitment occurs due to the overlap in electrical properties of different motoneuron types. Additionally, these practices underestimate the motoneuron firing rates and force data simulated by existing models. Significance. Our results indicate that current modeling practices increase conditions of motoneuron recruitment based on the size principle, and decrease conditions of mixed and reversed recruitment order, which, in turn, impacts the predictions made by existing models on motoneuron recruitment, firing rate, and force. Additionally, mixed and reverse motoneuron recruitment generated higher muscle force than orderly size motoneuron recruitment in these simulations and represents one potential scheme to increase muscle efficiency. The examined model design practices, as well as the present results, are applicable to neuronal modeling throughout the nervous system.

The effects of model composition design choices on high-fidelity simulations of motoneuron recruitment and firing behaviors.

PubMed

Allen, John M; Elbasiouny, Sherif M

2018-06-01

Computational models often require tradeoffs, such as balancing detail with efficiency; yet optimal balance should incorporate sound design features that do not bias the results of the specific scientific question under investigation. The present study examines how model design choices impact simulation results. We developed a rigorously-validated high-fidelity computational model of the spinal motoneuron pool to study three long-standing model design practices which have yet to be examined for their impact on motoneuron recruitment, firing rate, and force simulations. The practices examined were the use of: (1) generic cell models to simulate different motoneuron types, (2) discrete property ranges for different motoneuron types, and (3) biological homogeneity of cell properties within motoneuron types. Our results show that each of these practices accentuates conditions of motoneuron recruitment based on the size principle, and minimizes conditions of mixed and reversed recruitment orders, which have been observed in animal and human recordings. Specifically, strict motoneuron orderly size recruitment occurs, but in a compressed range, after which mixed and reverse motoneuron recruitment occurs due to the overlap in electrical properties of different motoneuron types. Additionally, these practices underestimate the motoneuron firing rates and force data simulated by existing models. Our results indicate that current modeling practices increase conditions of motoneuron recruitment based on the size principle, and decrease conditions of mixed and reversed recruitment order, which, in turn, impacts the predictions made by existing models on motoneuron recruitment, firing rate, and force. Additionally, mixed and reverse motoneuron recruitment generated higher muscle force than orderly size motoneuron recruitment in these simulations and represents one potential scheme to increase muscle efficiency. The examined model design practices, as well as the present results, are applicable to neuronal modeling throughout the nervous system.

Influence of the ``second gap'' on the optical absorption of transparent conducting oxides

NASA Astrophysics Data System (ADS)

Ha, Viet-Anh; Waroquiers, David; Rignanese, Gian-Marco; Hautier, Geoffroy

Transparent conducting oxides (TCOs) are critical to many technologies (e.g., thin-film solar cells, flat-panel displays or organic light-emitting diodes). TCOs are heavily doped (n or p-type) oxides that satisfy many design criteria such as high transparency to visible light (i.e., a band gap > 3 eV), high concentration and mobility of carriers (leading to high conductivity), ... In such (highly doped) systems, optical transitions from the conduction band minimum to higher energy bands in n-type or from lower energy bands to the valence band maximum in p-type are possible and can degrade transparency. In fact, it has been claimed that a high energy (> 3eV) for any of these transitions made possible by doping, commonly referred as a high ``second gap'', is a necessary design criterion for high performance TCOs. Here, we study the influence of this second gap on the transparency of doped TCOs by using ab initio calculations within the random phase approximation (RPA) for several well-known p-type and n-type TCOs. Our work highlights how the second gap affects the transparency of doped TCOs, shining light on more accurate design criteria for high performance TCOs.

27 CFR 4.62 - Mandatory statements.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., type, and distinctive designation. The advertisement shall contain a conspicuous statement of the class, type, or distinctive designation to which the product belongs, corresponding with the statement of class, type, or distinctive designation which is required to appear on the label of the product. (c...

Glare effect for three types of street lamps based on White LEDs

NASA Astrophysics Data System (ADS)

Sun, Ching-Cherng; Jiang, Chong-Jhih; Chen, Yi-Chun; Yang, Tsung-Hsun

2014-05-01

This study is aimed to assess the glare effect from LED-based street lamps with three general optical designs, which are cluster LEDs with a single lens, a LED array accompany with a lens array, and a tilted LED array, respectively. Observation conditions were simulated based on various locations and viewing axes. Equivalent luminance calculations were used to reveal the glare levels of the three designs. The age effect for the calculated equivalent luminance was also examined for human eyes of people at the age of 40 or 60. The results demonstrate that among the three design types, a LED array accompany with a lens array causes relatively smaller glare for most viewing conditions.

A research on motion design for APP's loading pages based on time perception

NASA Astrophysics Data System (ADS)

Cao, Huai; Hu, Xiaoyun

2018-04-01

Due to restrictions caused by objective reasons like network bandwidth, hardware performance and etc., waiting is still an inevitable phenomenon that appears in our using mobile-terminal products. Relevant researches show that users' feelings in a waiting scenario can affect their evaluations on the whole product and services the product provides. With the development of user experience and inter-facial design subjects, the role of motion effect in the interface design has attracted more and more scholars' attention. In the current studies, the research theory of motion design in a waiting scenario is imperfect. This article will use the basic theory and experimental research methods of cognitive psychology to explore the motion design's impact on user's time perception when users are waiting for loading APP pages. Firstly, the article analyzes the factors that affect waiting experience of loading APP pages based on the theory of time perception, and then discusses motion design's impact on the level of time-perception when loading pages and its design strategy. Moreover, by the operation analysis of existing loading motion designs, the article classifies the existing loading motions and designs an experiment to verify the impact of different types of motions on the user's time perception. The result shows that the waiting time perception of mobile's terminals' APPs is related to the loading motion types, the combination type of loading motions can effectively shorten the waiting time perception as it scores a higher mean value in the length of time perception.

Chinese Teachers' Self-Reported Beliefs and Practices Related to Majority and Minority Students in Xinjiang Uygur Autonomous Region

ERIC Educational Resources Information Center

Newton, Hongyan Z.

2011-01-01

This study begins to address the questions of what beliefs Chinese teachers hold about teaching and learning, about different student groups, and how these beliefs and expectations mediate their daily instructional practices. A triangulated mixed methods design was used for this study. This is a type of design in which different but complementary…

An Analysis of the Questions Proposed by Elementary Pre-Service Teachers When Designing Experimental Activities as Inquiry

ERIC Educational Resources Information Center

Cruz-Guzmán, Marta; García-Carmona, Antonio; Criado, Ana M.

2017-01-01

A qualitative study of an interpretative nature is presented of the topics that elementary pre-service teachers (EPTs) choose and the types of questions they propose when designing an experimental activity (ExA) as inquiry, after receiving explicit instruction about it. The participants in the study were 154 EPTs organised into small groups to…

A prospective randomised cross-over study of the effect of insulin analogues and human insulin on the frequency of severe hypoglycaemia in patients with type 1 diabetes and recurrent hypoglycaemia (the HypoAna trial): study rationale and design

PubMed Central

2012-01-01

Background Severe hypoglycaemia still represents a significant problem in insulin-treated diabetes. Most patients do not experience severe hypoglycaemia often. However, 20% of patients with type 1 diabetes experience recurrent severe hypoglycaemia corresponding to at least two episodes per year. The effect of insulin analogues on glycaemic control has been documented in large trials, while their effect on the frequency of severe hypoglycaemia is less clear, especially in patients with recurrent severe hypoglycaemia. The HypoAna Trial is designed to investigate whether short-acting and long-acting insulin analogues in comparison with human insulin are superior in reducing the occurrence of severe hypoglycaemic episodes in patients with recurrent hypoglycaemia. This paper reports the study design of the HypoAna Trial. Methods/design The study is a Danish two-year investigator-initiated, prospective, randomised, open, blinded endpoint (PROBE), multicentre, cross-over trial investigating the effect of insulin analogues versus human insulin on the frequency of severe hypoglycaemia in subjects with type 1 diabetes. Patients are randomised to treatment with basal-bolus therapy with insulin detemir / insulin aspart or human NPH insulin / human regular insulin in random order. The major inclusion criterion is history of two or more episodes of severe hypoglycaemia in the preceding year. Discussion In contrast to almost all other studies in this field the HypoAna Trial includes only patients with major problems with hypoglycaemia. The HypoAna Trial will elucidate whether basal-bolus regimen with short-acting and long-acting insulin analogues in comparison with human insulin are superior in reducing occurrence of severe hypoglycaemic episodes in hypoglycaemia prone patients with type 1 diabetes. http://www.clinicaltrials.gov: NCT00346996. PMID:22727048

Community College Facility Design: The Relationship between the Learning-Centered Paradigm and Learning Space as Viewed through the Lens of Developmental Studies Faculty

ERIC Educational Resources Information Center

Perkinson, Betty J.

2009-01-01

The view that community college developmental studies educators have about the space in which they teach, any renovated or new spaces they were involved in designing, and the type of space in which they would like to teach is examined. The developmental studies educators are experts in their field, having completed The Kellogg Institute at…

Optimum Design Parameters of Box Window DSF Office at Different Glazing Types under Sub Interval of Intermediate Sky Conditions (20-40 klux)

NASA Astrophysics Data System (ADS)

Elayeb, O. K.; Alghoul, M. A.; Sopian, K.; Khrita, N. G.

2017-11-01

Despite Double skin façade (DSF) buildings are widely deployed worldwide, daylighting strategy is not commonly incorporated in these buildings compare to other strategies. Therefore, further theoretical and experimental studies would lead to adopting daylighting strategy in DSF office buildings. The aim of this study is to investigate the daylighting performance of office building at different design parameters of box window DSF using different glazing types under sub interval of intermediate sky conditions (20-40) klux using the (IES VE) simulation tool from Integrated Environmental Solutions - Virtual Environment. The implemented design parameters are window wall ratio (WWR) of internal façade (10-100) %, cavity depth (CD) of DSF (1-2.5) m and different glazing types. The glazing types were selected from the list available in the (IES VE) simulation tool. After series of evaluations, bronze tinted coating (STOPSOL) is implemented for the exterior façade while clear float, clear reflective coating (STOPSOL), grey and brown tinted coating (Anti-sun float) and blue coating tinted (SUNCOOL float) are implemented for the interior façade. In this paper, several evaluation parameters are used to quantify the optimum design parameters that would balance the daylighting requirements of a box window DSF office versus sky conditions range (20-40) klux. The optimum design parameters of DSF office building obtained under different glazing types are highlighted as follows. When using bronze tinted coating (STOPSOL) for the exterior façade, the glazing types of interior façade that showed superior daylighting performance of DSF office at (CD of 1.0m with WWR of 70%), (CD of 1.5m with WWR of 70%), (CD of 2.0m with WWR of 70%) and (CD of 2.0m with WWR of 70%) are grey tinted coating (Anti-sun float), clear reflective coating (STOPSOL), brown tinted coating (Anti-sun float), and clear float glazing respectively. Blue Coating tinted (SUNCOOL float) of interior façade glazing failed to meet outstanding daylighting performance at any cavity depth.

Allowing for population stratification in case-only studies of gene-environment interaction, using genomic control.

PubMed

Yadav, Pankaj; Freitag-Wolf, Sandra; Lieb, Wolfgang; Dempfle, Astrid; Krawczak, Michael

2015-10-01

Gene-environment interactions (G × E) have attracted considerable research interest in the past owing to their scientific and public health implications, but powerful statistical methods are required to successfully track down G × E, particularly at a genome-wide level. Previously, a case-only (CO) design has been proposed as a means to identify G × E with greater efficiency than traditional case-control or cohort studies. However, as with genotype-phenotype association studies themselves, hidden population stratification (PS) can impact the validity of G × E studies using a CO design. Since this problem has been subject to little research to date, we used comprehensive simulation to systematically assess the type I error rate, power and effect size bias of CO studies of G × E in the presence of PS. Three types of PS were considered, namely genetic-only (PSG), environment-only (PSE), and joint genetic and environmental stratification (PSGE). Our results reveal that the type I error rate of an unadjusted Wald test, appropriate for the CO design, would be close to its nominal level (0.05 in our study) as long as PS involves only one interaction partner (i.e., either PSG or PSE). In contrast, if the study population is stratified with respect to both G and E (i.e., if there is PSGE), then the type I error rate is seriously inflated and estimates of the underlying G × E interaction are biased. Comparison of CO to a family-based case-parents design confirmed that the latter is more robust against PSGE, as expected. However, case-parent trios may be particularly unsuitable for G × E studies in view of the fact that they require genotype data from parents and that many diseases with an environmental component are likely to be of late onset. An alternative approach to adjusting for PS is principal component analysis (PCA), which has been widely used for this very purpose in past genome-wide association studies (GWAS). However, resolving genetic PS properly by PCA requires genetic data at the population level, the availability of which would conflict with the basic idea of the CO design. Therefore, we explored three modified Wald test statistics, inspired by the genomic control (GC) approach to GWAS, as an alternative means to allow for PSGE. The modified statistics were benchmarked against a stratified Wald test assuming known population affiliation, which should provide maximum power under PS. Our results confirm that GC is capable of successfully and efficiently correcting the PS-induced inflation of the type I error rate in CO studies of G × E.

Molecular design of donor-acceptor dyes for efficient dye-sensitized solar cells I: a DFT study.

PubMed

El-Shishtawy, Reda M; Asiri, Abdullah M; Aziz, Saadullah G; Elroby, Shaaban A K

2014-06-01

Dye-sensitized solar cells (DSSCs) have drawn great attention as low cost and high performance alternatives to conventional photovoltaic devices. The molecular design presented in this work is based on the use of pyran type dyes as donor based on frontier molecular orbitals (FMO) and theoretical UV-visible spectra in combination with squaraine type dyes as an acceptor. Density functional theory has been used to investigate several derivatives of pyran type dyes for a better dye design based on optimization of absorption, regeneration, and recombination processes in gas phase. The frontier molecular orbital (FMO) of the HOMO and LUMO energy levels plays an important role in the efficiency of DSSCs. These energies contribute to the generation of exciton, charge transfer, dissociation and exciton recombination. The computations of the geometries and electronic structures for the predicted dyes were performed using the B3LYP/6-31+G** level of theory. The FMO energies (EHOMO, ELUMO) of the studied dyes are calculated and analyzed in the terms of the UV-visible absorption spectra, which have been examined using time-dependent density functional theory (TD-DFT) techniques. This study examined absorption properties of pyran based on theoretical UV-visible absorption spectra, with comparisons between TD-DFT using B3LYP, PBE, and TPSSH functionals with 6-31+G (d) and 6-311++G** basis sets. The results provide a valuable guide for the design of donor-acceptor (D-A) dyes with high molar absorptivity and current conversion in DSSCs. The theoretical results indicated 4-(dicyanomethylene)-2-methyl-6-(p-dimethylaminostyryl)-4H-pyran dye (D2-Me) can be effectively used as a donor dye for DSSCs. This dye has a low energy gap by itself and a high energy gap with squaraine acceptor type dye, the design that reduces the recombination and improves the photocurrent generation in solar cell.

Design optimization studies using COSMIC NASTRAN

NASA Technical Reports Server (NTRS)

Pitrof, Stephen M.; Bharatram, G.; Venkayya, Vipperla B.

1993-01-01

The purpose of this study is to create, test and document a procedure to integrate mathematical optimization algorithms with COSMIC NASTRAN. This procedure is very important to structural design engineers who wish to capitalize on optimization methods to ensure that their design is optimized for its intended application. The OPTNAST computer program was created to link NASTRAN and design optimization codes into one package. This implementation was tested using two truss structure models and optimizing their designs for minimum weight, subject to multiple loading conditions and displacement and stress constraints. However, the process is generalized so that an engineer could design other types of elements by adding to or modifying some parts of the code.

Macroscopic and microscopic evaluation of a new implant design supporting immediately loaded full arch rehabilitation

PubMed Central

Tetè, Stefano; Zizzari, Vincenzo; De Carlo, Alessandro; Sinjari, Bruna; Gherlone, Enrico

2012-01-01

Summary The purpose of this study is to evaluate macroscopic and microscopic appearance of a new implant design, with particular emphasis given to the type of prosthesis connection. Two dental implants of the same type (Torque Type®, WinSix®, BioSAFin. S.r.l. - Ancona, Italy), with sandblasted and acid etched surfaces (Micro Rough Surface®), but differing from each other for the prosthesis connection system, were examined by scanning electron microscope (SEM) analysis at different magnifications: TTI implant, with a hexagonal internal connection, and TTX implant, with a hexagonal external connection. SEM analysis showed that the Torque Type® implant is characterized by a truncated cone shape with tapered tips. The implant body showed a double loop thread and double pitch with blunt tips. For both types of connection, the implant neck was 0.7 mm in height with a 3% taper. This implant design may be able to guarantee osteotomic properties at the time of insertion in a surgical site suitably prepared, a facilitated screwing, thanks to the thread pitch and to the broad and deep draining grooves, thereby ensuring a good primary stability. The different connection design appears defined and precise, in order to ensure a good interface between the fixture and the prosthetic components. Therefore, this design appears to be particularly suitable in cases where a good primary stability is necessary and a precise coupling between endosseous and prosthetic components, as it allows an easy insertion of the fixture even in conditions of reduced bone availability, and in cases of immediately loaded full-arch rehabilitations. PMID:23087785

Macroscopic and microscopic evaluation of a new implant design supporting immediately loaded full arch rehabilitation.

PubMed

Tetè, Stefano; Zizzari, Vincenzo; De Carlo, Alessandro; Sinjari, Bruna; Gherlone, Enrico

2012-04-01

The purpose of this study is to evaluate macroscopic and microscopic appearance of a new implant design, with particular emphasis given to the type of prosthesis connection. Two dental implants of the same type (Torque Type(®), WinSix(®), BioSAFin. S.r.l. - Ancona, Italy), with sandblasted and acid etched surfaces (Micro Rough Surface(®)), but differing from each other for the prosthesis connection system, were examined by scanning electron microscope (SEM) analysis at different magnifications: TTI implant, with a hexagonal internal connection, and TTX implant, with a hexagonal external connection. SEM analysis showed that the Torque Type(®) implant is characterized by a truncated cone shape with tapered tips. The implant body showed a double loop thread and double pitch with blunt tips. For both types of connection, the implant neck was 0.7 mm in height with a 3% taper. This implant design may be able to guarantee osteotomic properties at the time of insertion in a surgical site suitably prepared, a facilitated screwing, thanks to the thread pitch and to the broad and deep draining grooves, thereby ensuring a good primary stability. The different connection design appears defined and precise, in order to ensure a good interface between the fixture and the prosthetic components. Therefore, this design appears to be particularly suitable in cases where a good primary stability is necessary and a precise coupling between endosseous and prosthetic components, as it allows an easy insertion of the fixture even in conditions of reduced bone availability, and in cases of immediately loaded full-arch rehabilitations.

Architectural Kansei of ‘Wall’ in The Façade Design by Le Corbusier

NASA Astrophysics Data System (ADS)

Sendai, Shoichiro

The purpose of this paper is to discuss the modern architect Le Corbusier's architectural Kansei (sensibility) on wall in site environment through the analysis of his façade design, using Œuvres complètes (1910-1965, 8 vols., Les éditions d'architecture, Artemis, Zurich) and Le Corbusier Archives (1982-1984, 32 vols., Garland Publishing, Inc. and Fondation Le Corbusier, New York, London, Paris). At first, I arrange five façade types, according to the explanation by Le Corbusier ; ‘fenêtre en longueur (strip window)’, ‘pan de verre (glass wall)’, ‘brise-soleil (sun-breaker)’, ‘loggia’ and ‘claustra’. Through the analysis of the relationship between these types and the design process of each building, we find that Le Corbusier's façade design includes the affirmation and the negation of the ‘wall’ at the same time. In fact, the nature of façade modification during design process is divers: increase in transparency, decrease in transparency and spatialization of façade. That means, Le Corbusier studied the environmental condition by these façade types, and tried to realize the phenomenal openness. This trial bases on the function of architectural Kansei as correspondence between body and environment beyond the physical design.

A Thermal Stability Test for Primary Explosive Stab Sensitizers: Study of the Thermal and Hydrolytic Stability of 2-Picryl-5-Nitrotetrazole,

DTIC Science & Technology

1984-02-01

have been described previously (2]. The actual batch used was designated Batch D and was identical to that referred to as Batch C in Reference [2...Tetrazene was type RD1357 prepared at Materials Research Laboratories. The batch used was designated Batch 10/83(A). Lead Azide was type RD1343 and was...Preparation of Experimental Detonators Eperimental detonators were prepared in mild steel tubes, 6 mm o.d., 3.2 mm i.d., length 6 mm, prepared from

A fast acting electrical servo for the actuation of full span, Fowler-type wing flaps in DLC applications: A detail design study

NASA Technical Reports Server (NTRS)

Smetana, F. O.; Montoya, R. J.; Carden, R. K.

1972-01-01

The philosophy and detail design of an electro-mechanical actuator for Fowler-type wing flaps which have a response time constant of 0.025 seconds are described. A conventional electrical servomotor with a power rating twice the maximum power delivered to the load is employed along with adaptive, gain-scheduled feedback and various logic circuits, including one to remove electrical excitation from the motor during extended periods when no motion of the flap is desired.

Rationale, design and methods of the HEALTHY study behavior intervention component

USDA-ARS?s Scientific Manuscript database

HEALTHY was a multi-center primary prevention trial designed to reduce risk factors for type 2 diabetes in adolescents. Seven centers each recruited six middle schools that were randomized to either intervention or control. The HEALTHY intervention integrated multiple components in nutrition, physic...

Vehicle impact simulation for curb and barrier design : volume 1, impact simulation procedures.

DOT National Transportation Integrated Search

1998-10-01

The objectives of this study were to perform computer simulations of vehicle-curb and vehicle-berm impacts, to characterize : the behavior of a wide range of vehicle types after such impacts, and to produce design and evaluation trajectory data for u...

Faculty Incentives for Online Course Design, Delivery, and Professional Development

ERIC Educational Resources Information Center

Herman, Jennifer H.

2013-01-01

This quantitative study investigated the types and frequency of incentives for online instruction at non-profit institutions of higher education with an established teaching and learning development unit. While up to 70% of institutions offer incentives, this support is not universal and varies by incentive type and purpose.

Analysis on Flexural Strength of A36 Mild Steel by Design of Experiment (DOE)

NASA Astrophysics Data System (ADS)

Nurulhuda, A.; Hafizzal, Y.; Izzuddin, MZM; Sulawati, MRN; Rafidah, A.; Suhaila, Y.; Fauziah, AR

2017-08-01

Nowadays demand for high quality and reliable components and materials are increasing so flexural tests have become vital test method in both the research and manufacturing process and development to explain in details about the material’s ability to withstand deformation under load. Recently, there are lack research studies on the effect of thickness, welding type and joint design on the flexural condition by DOE approach method. Therefore, this research will come out with the flexural strength of mild steel since it is not well documented. By using Design of Experiment (DOE), a full factorial design with two replications has been used to study the effects of important parameters which are welding type, thickness and joint design. The measurement of output response is identified as flexural strength value. Randomize experiments was conducted based on table generated via Minitab software. A normal probability test was carried out using Anderson Darling Test and show that the P-value is <0.005. Thus, the data is not normal since there is significance different between the actual data with the ideal data. Referring to the ANOVA, only factor joint design is significant since the P-value is less than 0.05. From the main plot and interaction plot, the recommended setting for each of parameters were suggested as high level for welding type, high level for thickness and low level for joint design. The prediction model was developed thru regression in order to measure effect of output response for any changes on parameters setting. In the future, the experiments can be enhanced using Taguchi methods in order to do verification of result.

Special-purpose fiber type 475--toxicological assessment.

PubMed

Bernstein, D M

2007-02-01

Type 475 special-purpose glass fiber is rather unique among the family of synthetic mineral fibers. It is used not for insulation but for "high-end" filtration products designed for high and ultra-high purity filtration of air and liquids. The designation for these types of filters varies with country and includes HEPA, ULPA, EU 10-13, EN1822, and S3. In its evaluation, type 475 has been grouped together with E-glass another special-purpose fibre often with little distinction made in terms of its chemistry and corresponding toxicological response. The detailed review of the available toxicology data on type 475 glass fibers clearly shows that following inhalation of this fiber even at relatively high doses, which likely exceed that at which lung overload in the rat is known to occur, type 475 glass fibers are not fibrogenic and do not cause tumors. These data clearly show an important differentiation in potency between type 475 glass fibers and E-glass and support treating these two types of fibers independently and not equating them though the term "special-purpose fibers." Analysis of the intraperitoneal studies taking into account fibre dimensions shows that at 109 fibers injected, there was a 0.3 tumor incidence. While these studies indicate according to the European Commission (EC) classification criteria that 475 should not be fully exonerated as a carcinogen, the results of the inhalation study fully support classification in category 3. The IP results are more difficult to interpret, however, the IP study itself provides no toxicological basis for determining what range of dose-response should correspond to EU category 3 or 2. Following the EC classification criteria, the toxicological data clearly indicate that 475 fibers are appropriately classified in EC category 3.

Optimization of Perovskite Gas Sensor Performance: Characterization, Measurement and Experimental Design.

PubMed

Bertocci, Francesco; Fort, Ada; Vignoli, Valerio; Mugnaini, Marco; Berni, Rossella

2017-06-10

Eight different types of nanostructured perovskites based on YCoO 3 with different chemical compositions are prepared as gas sensor materials, and they are studied with two target gases NO 2 and CO. Moreover, a statistical approach is adopted to optimize their performance. The innovative contribution is carried out through a split-plot design planning and modeling, also involving random effects, for studying Metal Oxide Semiconductors (MOX) sensors in a robust design context. The statistical results prove the validity of the proposed approach; in fact, for each material type, the variation of the electrical resistance achieves a satisfactory optimized value conditional to the working temperature and by controlling for the gas concentration variability. Just to mention some results, the sensing material YCo 0 . 9 Pd 0 . 1 O 3 (Mt1) achieved excellent solutions during the optimization procedure. In particular, Mt1 resulted in being useful and feasible for the detection of both gases, with optimal response equal to +10.23% and working temperature at 312 ∘ C for CO (284 ppm, from design) and response equal to -14.17% at 185 ∘ C for NO 2 (16 ppm, from design). Analogously, for NO 2 (16 ppm, from design), the material type YCo 0 . 9 O 2 . 85 + 1 % Pd (Mt8) allows for optimizing the response value at - 15 . 39 % with a working temperature at 181 . 0 ∘ C, whereas for YCo 0 . 95 Pd 0 . 05 O 3 (Mt3), the best response value is achieved at - 15 . 40 % with the temperature equal to 204 ∘ C.

Optimization of Perovskite Gas Sensor Performance: Characterization, Measurement and Experimental Design

PubMed Central

Bertocci, Francesco; Fort, Ada; Vignoli, Valerio; Mugnaini, Marco; Berni, Rossella

2017-01-01

Eight different types of nanostructured perovskites based on YCoO3 with different chemical compositions are prepared as gas sensor materials, and they are studied with two target gases NO2 and CO. Moreover, a statistical approach is adopted to optimize their performance. The innovative contribution is carried out through a split-plot design planning and modeling, also involving random effects, for studying Metal Oxide Semiconductors (MOX) sensors in a robust design context. The statistical results prove the validity of the proposed approach; in fact, for each material type, the variation of the electrical resistance achieves a satisfactory optimized value conditional to the working temperature and by controlling for the gas concentration variability. Just to mention some results, the sensing material YCo0.9Pd0.1O3 (Mt1) achieved excellent solutions during the optimization procedure. In particular, Mt1 resulted in being useful and feasible for the detection of both gases, with optimal response equal to +10.23% and working temperature at 312∘C for CO (284 ppm, from design) and response equal to −14.17% at 185∘C for NO2 (16 ppm, from design). Analogously, for NO2 (16 ppm, from design), the material type YCo0.9O2.85+1%Pd (Mt8) allows for optimizing the response value at −15.39% with a working temperature at 181.0∘C, whereas for YCo0.95Pd0.05O3 (Mt3), the best response value is achieved at −15.40% with the temperature equal to 204∘C. PMID:28604587

Re-conceiving building design quality: A review of building users in their social context.

PubMed

Watson, Kelly J; Evans, James; Karvonen, Andrew; Whitley, Tim

2016-05-01

Considerable overlap exists between post-occupancy research evaluating building design quality and the concept of 'social value', popularised by its recent application to issues of the public realm. To outline this potential research agenda, the paper reviews design quality research on buildings in relation to users and their social context where the term 'social context' refers to building user group dynamics, a combination of organisational cultures, management strategies, and social norms and practices. The review is conducted across five key building types, namely housing, workplaces, healthcare, education, and the retail/service sector. Research commonalities and gaps are identified in order to build a more comprehensive picture of the design quality literature and its handling of users in their social context. The key findings concerning each building type are presented visually. It is concluded that the design quality field comprises a patchwork of relatively isolated studies of various building types, with significant potential for theoretical and empirical development through interdisciplinary collaboration. Users tend to be conceived as anonymous and autonomous individuals with little analysis of user identity or interaction. Further, the contextual impact of user group dynamics on the relationship between building design and building user is rarely addressed in the literature. Producing a more nuanced understanding of users in situ is proposed as an important area for future design quality research.

Re-conceiving building design quality: A review of building users in their social context

PubMed Central

Evans, James; Karvonen, Andrew; Whitley, Tim

2014-01-01

Considerable overlap exists between post-occupancy research evaluating building design quality and the concept of ‘social value’, popularised by its recent application to issues of the public realm. To outline this potential research agenda, the paper reviews design quality research on buildings in relation to users and their social context where the term ‘social context’ refers to building user group dynamics, a combination of organisational cultures, management strategies, and social norms and practices. The review is conducted across five key building types, namely housing, workplaces, healthcare, education, and the retail/service sector. Research commonalities and gaps are identified in order to build a more comprehensive picture of the design quality literature and its handling of users in their social context. The key findings concerning each building type are presented visually. It is concluded that the design quality field comprises a patchwork of relatively isolated studies of various building types, with significant potential for theoretical and empirical development through interdisciplinary collaboration. Users tend to be conceived as anonymous and autonomous individuals with little analysis of user identity or interaction. Further, the contextual impact of user group dynamics on the relationship between building design and building user is rarely addressed in the literature. Producing a more nuanced understanding of users in situ is proposed as an important area for future design quality research. PMID:27110217

A Study of the Effectiveness of Three Types of Visual Devices on the Achievement of Selected Theoretical Concepts by Elementary School Children.

ERIC Educational Resources Information Center

McIntyre, Patrick Joseph

The purpose of this study was to determine the relative effectiveness of three different types of visual devices in an instructional program designed to teach an understanding of selected theoretical science concepts to elementary school children. The visual devices were prepared using Bruner's three modes of representation (enactive, iconic, and…

The Effect of Different Types of Perceptual Manipulations on the Dimensionality of Automatically Generated Figural Matrices

ERIC Educational Resources Information Center

Arendasy, M.; Sommer, M.

2005-01-01

Two pilot studies (n"1=155, n"2=451) are presented in this article, which were carried out within the development of an item generator for the automatic generation of figural matrices items. The focus of the presented studies was to compare two types of item designs with regard to the effect of variations of the property ''perceptual…

Whole-body Vibration Exposure Intervention among Professional Bus and Truck Drivers: A Laboratory Evaluation of Seat-suspension Designs.

PubMed

Blood, Ryan P; Yost, Michael G; Camp, Janice E; Ching, Randal P

2015-01-01

Long-term exposure to seated whole-body vibration (WBV) is one of the leading risk factors for the development of low back disorders. Professional bus and truck drivers are regularly exposed to continuous WBV, since they spend the majority of their working hours driving heavy vehicles. This study measured WBV exposures among professional bus and truck drivers and evaluated the effects of seat-suspension designs using simulated field-collected data on a vibration table. WBV exposures were measured and compared across three different seat designs: an air-ride bus seat, an air-ride truck seat, and an electromagnetically active (EM-active) seat. Air-ride seats use a compressed-air bladder to attenuate vibrations, and they have been in operation throughout the transportation industry for many years. The EM-active seat is a relatively new design that incorporates a microprocessor-controlled actuator to dampen vibration. The vibration table simulated seven WBV exposure scenarios: four segments of vertical vibration and three scenarios that used field-collected driving data on different road surfaces-a city street, a freeway, and a section of rough roadway. The field scenarios used tri-axial WBV data that had been collected at the seat pan and at the driver's sternum, in accordance with ISO 2631-1 and 2631-5. This study found that WBV was significantly greater in the vertical direction (z-axis) than in the lateral directions (x-and y-axes) for each of the three road types and each of the three types of seats. Quantitative comparisons of the results showed that the floor-to-seat-pan transmissibility was significantly lower for the EM-active seat than for either the air-ride bus seat or the air-ride truck seat, across all three road types. This study also demonstrated that seat-suspension designs have a significant effect on the vibrations transmitted to vehicle operators, and the study's results may prove useful in designing future seat suspensions.

Design and manufacture of a D-shape coil-based toroid-type HTS DC reactor using 2nd generation HTS wire

NASA Astrophysics Data System (ADS)

Kim, Kwangmin; Go, Byeong-Soo; Sung, Hae-Jin; Park, Hea-chul; Kim, Seokho; Lee, Sangjin; Jin, Yoon-Su; Oh, Yunsang; Park, Minwon; Yu, In-Keun

2014-09-01

This paper describes the design specifications and performance of a real toroid-type high temperature superconducting (HTS) DC reactor. The HTS DC reactor was designed using 2G HTS wires. The HTS coils of the toroid-type DC reactor magnet were made in the form of a D-shape. The target inductance of the HTS DC reactor was 400 mH. The expected operating temperature was under 20 K. The electromagnetic performance of the toroid-type HTS DC reactor magnet was analyzed using the finite element method program. A conduction cooling method was adopted for reactor magnet cooling. Performances of the toroid-type HTS DC reactor were analyzed through experiments conducted under the steady-state and charge conditions. The fundamental design specifications and the data obtained from this research will be applied to the design of a commercial-type HTS DC reactor.

Structural Biology Insight for the Design of Sub-type Selective Aurora Kinase Inhibitors.

PubMed

Sarvagalla, Sailu; Coumar, Mohane Selvaraj

2015-01-01

Aurora kinase A, B and C, are key regulators of mitosis and are over expressed in many of the human cancers, making them an ideal drug target for cancer chemotherapy. Currently, over a dozen of Aurora kinase inhibitors are in various phases of clinical development. The majority of the inhibitors (VX-680/MK-0457, PHA-739358, CYC116, SNS-314, AMG 900, AT-9283, SCH- 1473759, ABT-348, PF-03814735, R-763/AS-703569, KW-2449 and TAK-901) are pan-selective (isoform non-selective) and few are Aurora A (MLN8054, MLN8237, VX-689/MK5108 and ENMD 2076) and Aurora B (AZD1152 and GSK1070916) sub-type selective. Despite the intensive research efforts in the past decade, no Aurora kinase inhibitor has reached the market. Recent evidence suggests that the sub-type selective Aurora kinase A inhibitor could possess advantages over pan-selective Aurora inhibitors, by avoiding Aurora B mediated neutropenia. However, sub-type selective Aurora kinase A inhibitor design is very challenging due to the similarity in the active site among the isoforms. Structural biology and computational aspects pertaining to the design of Aurora kinase inhibitors were analyzed and found that a possible means to develop sub-type selective inhibitor is by targeting Aurora A specific residues (Leu215, Thr217 and Arg220) or Aurora B specific residues (Arg159, Glu161 and Lys164), near the solvent exposed region of the protein. Particularly, a useful strategy for the design of sub-type selective Aurora A inhibitor could be by targeting Thr217 residue as in the case of MLN8054. Further preclinical and clinical studies with the sub-type selective Aurora inhibitors could help bring them to the market for the treatment of cancer.

Development of tf coil support concepts by design methodology in the case of a Bitter-type magnet. [Bitter-type magnets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brossmann, U.B.

1981-01-01

The application of the methodological design is demonstrated for the development of support concepts in the case of a Bitter-type magnet designed for a compact tokamak experimentat aiming at ignition of a DT plasma. With this methodology all boundary conditions and design criteria are more easily satisfied in a technical and economical way.

Effect of vehicle type on the performance of second generation air bags for child occupants.

PubMed

Arbogast, Kristy B; Durbin, Dennis R; Kallan, Michael J; Winston, Flaura K

2003-01-01

Passenger air bags experienced considerable design modification in the late 1990s, principally to mitigate risks to child passengers. This study utilized Data from the Partners for Child Passenger Safety study, a large-scale child-focused crash surveillance system, to examine the effect of vehicle type on the differential performance of first and second generation air bags on injuries to restrained children in frontal impact crashes. Our results show that the benefit of second-generation air bags was seen in passenger cars - those children exposed to second-generation air bags were half as likely to sustain a serious injury - and minivans. However, in SUVs the data suggest no reduction in injury risk with the new designs. This field data provides crucial real-world experience to the automotive industry as they work towards the next generation of air bag designs.

Effect of Vehicle type on the Performance of Second Generation Air Bags for Child Occupants

PubMed Central

Arbogast, Kristy B.; Durbin, Dennis R.; Kallan, Michael J.; Winston, Flaura K.

2003-01-01

Passenger air bags experienced considerable design modification in the late 1990s, principally to mitigate risks to child passengers. This study utilized Data from the Partners for Child Passenger Safety study, a large-scale child-focused crash surveillance system, to examine the effect of vehicle type on the differential performance of first and second generation air bags on injuries to restrained children in frontal impact crashes. Our results show that the benefit of second-generation air bags was seen in passenger cars – those children exposed to second-generation air bags were half as likely to sustain a serious injury – and minivans. However, in SUVs the data suggest no reduction in injury risk with the new designs. This field data provides crucial real-world experience to the automotive industry as they work towards the next generation of air bag designs. PMID:12941218

Personalizing Biomaterials for Precision Nanomedicine Considering the Local Tissue Microenvironment.

PubMed

Oliva, Nuria; Unterman, Shimon; Zhang, Yi; Conde, João; Song, Hyun Seok; Artzi, Natalie

2015-08-05

New advances in (nano)biomaterial design coupled with the detailed study of tissue-biomaterial interactions can open a new chapter in personalized medicine, where biomaterials are chosen and designed to match specific tissue types and disease states. The notion of a "one size fits all" biomaterial no longer exists, as growing evidence points to the value of customizing material design to enhance (pre)clinical performance. The complex microenvironment in vivo at different tissue sites exhibits diverse cell types, tissue chemistry, tissue morphology, and mechanical stresses that are further altered by local pathology. This complex and dynamic environment may alter the implanted material's properties and in turn affect its in vivo performance. It is crucial, therefore, to carefully study tissue context and optimize biomaterials considering the implantation conditions. This practice would enable attaining predictable material performance and enhance clinical outcomes. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

An estimation framework for building information modeling (BIM)-based demolition waste by type.

PubMed

Kim, Young-Chan; Hong, Won-Hwa; Park, Jae-Woo; Cha, Gi-Wook

2017-12-01

Most existing studies on demolition waste (DW) quantification do not have an official standard to estimate the amount and type of DW. Therefore, there are limitations in the existing literature for estimating DW with a consistent classification system. Building information modeling (BIM) is a technology that can generate and manage all the information required during the life cycle of a building, from design to demolition. Nevertheless, there has been a lack of research regarding its application to the demolition stage of a building. For an effective waste management plan, the estimation of the type and volume of DW should begin from the building design stage. However, the lack of tools hinders an early estimation. This study proposes a BIM-based framework that estimates DW in the early design stages, to achieve an effective and streamlined planning, processing, and management. Specifically, the input of construction materials in the Korean construction classification system and those in the BIM library were matched. Based on this matching integration, the estimates of DW by type were calculated by applying the weight/unit volume factors and the rates of DW volume change. To verify the framework, its operation was demonstrated by means of an actual BIM modeling and by comparing its results with those available in the literature. This study is expected to contribute not only to the estimation of DW at the building level, but also to the automated estimation of DW at the district level.

Feasibility study of an Integrated Program for Aerospace vehicle Design (IPAD). Volume 4: IPAD system design

NASA Technical Reports Server (NTRS)

Goldfarb, W.; Carpenter, L. C.; Redhed, D. D.; Hansen, S. D.; Anderson, L. O.; Kawaguchi, A. S.

1973-01-01

The computing system design of IPAD is described and the requirements which form the basis for the system design are discussed. The system is presented in terms of a functional design description and technical design specifications. The functional design specifications give the detailed description of the system design using top-down structured programming methodology. Human behavioral characteristics, which specify the system design at the user interface, security considerations, and standards for system design, implementation, and maintenance are also part of the technical design specifications. Detailed specifications of the two most common computing system types in use by the major aerospace companies which could support the IPAD system design are presented. The report of a study to investigate migration of IPAD software between the two candidate 3rd generation host computing systems and from these systems to a 4th generation system is included.

Design of control-group conditions in clinical trials of behavioral interventions.

PubMed

Lindquist, Ruth; Wyman, Jean F; Talley, Kristine M C; Findorff, Mary J; Gross, Cynthia R

2007-01-01

To review considerations in the design of placebo (attention) control conditions for community-based clinical trials of health behavior change interventions and to provide practical strategies for the design of control conditions. A well-designed control condition is an essential component of a clinical trial to foster the unambiguous interpretation of study findings. Pitfalls in the design of control conditions in clinical trials of behavioral interventions are identified and strategies to address them are offered. Types of control conditions that have been used in fall prevention trials are described, along with their strengths and weaknesses. The control condition used in the recent fall evaluation and prevention program (FEPP) was designed to overcome limitations of previous trial designs; it is provided to illustrate how to apply specific design principles. Pitfalls in the design of behavioral intervention studies may be avoided with the application of sound design principles. The FEPP active control condition can be used as a model in the design of future studies.

An Optimization-Based Approach to Injector Element Design

NASA Technical Reports Server (NTRS)

Tucker, P. Kevin; Shyy, Wei; Vaidyanathan, Rajkumar; Turner, Jim (Technical Monitor)

2000-01-01

An injector optimization methodology, method i, is used to investigate optimal design points for gaseous oxygen/gaseous hydrogen (GO2/GH2) injector elements. A swirl coaxial element and an unlike impinging element (a fuel-oxidizer-fuel triplet) are used to facilitate the study. The elements are optimized in terms of design variables such as fuel pressure drop, APf, oxidizer pressure drop, deltaP(sub f), combustor length, L(sub comb), and full cone swirl angle, theta, (for the swirl element) or impingement half-angle, alpha, (for the impinging element) at a given mixture ratio and chamber pressure. Dependent variables such as energy release efficiency, ERE, wall heat flux, Q(sub w), injector heat flux, Q(sub inj), relative combustor weight, W(sub rel), and relative injector cost, C(sub rel), are calculated and then correlated with the design variables. An empirical design methodology is used to generate these responses for both element types. Method i is then used to generate response surfaces for each dependent variable for both types of elements. Desirability functions based on dependent variable constraints are created and used to facilitate development of composite response surfaces representing the five dependent variables in terms of the input variables. Three examples illustrating the utility and flexibility of method i are discussed in detail for each element type. First, joint response surfaces are constructed by sequentially adding dependent variables. Optimum designs are identified after addition of each variable and the effect each variable has on the element design is illustrated. This stepwise demonstration also highlights the importance of including variables such as weight and cost early in the design process. Secondly, using the composite response surface that includes all five dependent variables, unequal weights are assigned to emphasize certain variables relative to others. Here, method i is used to enable objective trade studies on design issues such as component life and thrust to weight ratio. Finally, combining results from both elements to simulate a trade study, thrust-to-weight trends are illustrated and examined in detail.

49 CFR 172.102 - Special provisions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... design type that has passed a leakproofness test at the Packing Group II level. Small inner packagings... packaging or transport unit is closed. Each packaging must correspond to a design type that has passed a... transport unit is closed. Each packaging must correspond to a design type that has passed a leakproofness...

49 CFR 172.102 - Special provisions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... bags, each packaging must correspond to a design type that has passed a leakproofness test at the... packaging must correspond to a design type that has passed a leakproofness test at the Packing Group II... packaging must correspond to a design type that has passed a leakproofness test at the Packing Group II...

49 CFR 172.102 - Special provisions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... packaging must correspond to a design type that has passed a leakproofness test at the Packing Group II... packaging must correspond to a design type that has passed a leakproofness test at the Packing Group II... packagings, each packaging must correspond to a design type that has passed a leakproofness test at the...

49 CFR 172.102 - Special provisions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... packaging must correspond to a design type that has passed a leakproofness test at the Packing Group II... packaging must correspond to a design type that has passed a leakproofness test at the Packing Group II... packagings, each packaging must correspond to a design type that has passed a leakproofness test at the...

49 CFR 172.102 - Special provisions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... design type that has passed a leakproofness test at the Packing Group II level. Small inner packagings... packaging or transport unit is closed. Each packaging must correspond to a design type that has passed a... transport unit is closed. Each packaging must correspond to a design type that has passed a leakproofness...

European Design Types for 21st Century Schools: An Overview

ERIC Educational Resources Information Center

Rigolon, Alessandro

2010-01-01

This article presents a critical overview of European school building design types, based on an analysis of morphologies and spatial layouts. The different design types are evaluated in function of specific didactic and social needs. (Contains 1 figure, 18 footnotes, a bibliography and 2 online resources.)

49 CFR 178.74 - Approval of MEGCs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Specifications for Cylinders § 178.74 Approval of MEGCs. (a) Application for design type approval. (1) Each new MEGC design type must have a design approval certificate. An owner or manufacturer must apply to an... materials of the same type and thickness, by the same fabrication techniques and with identical supports...

49 CFR 178.70 - Approval of UN pressure receptacles.

Code of Federal Regulations, 2012 CFR

2012-10-01

... designee. (b) IIA pre-audit. The manufacturer must submit an application for initial design type approval... of the manufacturer and the IIA certifying the design type, the test results, chemical analyses, lot... initial design type approval. If the pre-audit is found satisfactory by the IIA, the manufacturer will...

49 CFR 178.70 - Approval of UN pressure receptacles.

Code of Federal Regulations, 2011 CFR

2011-10-01

... designee. (b) IIA pre-audit. The manufacturer must submit an application for initial design type approval... of the manufacturer and the IIA certifying the design type, the test results, chemical analyses, lot... initial design type approval. If the pre-audit is found satisfactory by the IIA, the manufacturer will...

49 CFR 178.70 - Approval of UN pressure receptacles.

Code of Federal Regulations, 2014 CFR

2014-10-01

... designee. (b) IIA pre-audit. The manufacturer must submit an application for initial design type approval... of the manufacturer and the IIA certifying the design type, the test results, chemical analyses, lot... initial design type approval. If the pre-audit is found satisfactory by the IIA, the manufacturer will...

49 CFR 178.70 - Approval of UN pressure receptacles.

Code of Federal Regulations, 2013 CFR

2013-10-01

... designee. (b) IIA pre-audit. The manufacturer must submit an application for initial design type approval... of the manufacturer and the IIA certifying the design type, the test results, chemical analyses, lot... initial design type approval. If the pre-audit is found satisfactory by the IIA, the manufacturer will...

Designing Dendrimers to Offer Micelle-Type Nanocontainers

ERIC Educational Resources Information Center

King, Angela G.

2005-01-01

The properties of a dendrimer with hydrophobic and hydrophilic substituents on an orthogonal plane is synthesized and studied. The resulting polymer contains one of the substituents in its concave interior and the other at the convex surface and the design promotes micelle-like behavior in polar solvent and inverted micelle arrangement in…

Mistreatment in Assisted Living Facilities: Complaints, Substantiations, and Risk Factors

ERIC Educational Resources Information Center

Phillips, Linda R.; Guo, Guifang

2011-01-01

Purpose of the Study: Use archived public data from Arizona to explore relationships among selected institutional and resident risk and situation-specific factors and complaints and substantiated allegations of various types of mistreatment in assisted living facilities (ALFs). Design and Methods: An exploratory/descriptive 2-group design was…

Knowledge Construction and Knowledge Representation in High School Students' Design of Hypermedia Documents

ERIC Educational Resources Information Center

Chen, Pearl; McGrath, Diane

2003-01-01

This study documented the processes of knowledge construction and knowledge representation in high school students' hypermedia design projects. Analysis of knowledge construction in linking and structural building yielded distinct types and subtypes of hypermedia documents, which were characterized by four features of knowledge representation: (a)…

Using Disciplinary Literacies to Enhance Adolescents' Engineering Design Activity

ERIC Educational Resources Information Center

Wilson, Amy Alexandra; Smith, Emma; Householder, Daniel L.

2014-01-01

This comparative case study describes the literacy practices of two groups of adolescents as they sought to solve authentic problems through engineering design processes. Three types of data were collected as the groups addressed these problems: video- and audio-recordings of their conversations; adolescent-generated products; and pre- and…

User Interaction in Semi-Automatic Segmentation of Organs at Risk: a Case Study in Radiotherapy.

PubMed

Ramkumar, Anjana; Dolz, Jose; Kirisli, Hortense A; Adebahr, Sonja; Schimek-Jasch, Tanja; Nestle, Ursula; Massoptier, Laurent; Varga, Edit; Stappers, Pieter Jan; Niessen, Wiro J; Song, Yu

2016-04-01

Accurate segmentation of organs at risk is an important step in radiotherapy planning. Manual segmentation being a tedious procedure and prone to inter- and intra-observer variability, there is a growing interest in automated segmentation methods. However, automatic methods frequently fail to provide satisfactory result, and post-processing corrections are often needed. Semi-automatic segmentation methods are designed to overcome these problems by combining physicians' expertise and computers' potential. This study evaluates two semi-automatic segmentation methods with different types of user interactions, named the "strokes" and the "contour", to provide insights into the role and impact of human-computer interaction. Two physicians participated in the experiment. In total, 42 case studies were carried out on five different types of organs at risk. For each case study, both the human-computer interaction process and quality of the segmentation results were measured subjectively and objectively. Furthermore, different measures of the process and the results were correlated. A total of 36 quantifiable and ten non-quantifiable correlations were identified for each type of interaction. Among those pairs of measures, 20 of the contour method and 22 of the strokes method were strongly or moderately correlated, either directly or inversely. Based on those correlated measures, it is concluded that: (1) in the design of semi-automatic segmentation methods, user interactions need to be less cognitively challenging; (2) based on the observed workflows and preferences of physicians, there is a need for flexibility in the interface design; (3) the correlated measures provide insights that can be used in improving user interaction design.

Analysis of Orthopedic Resident Ability to Apply Levels of Evidence Criteria to Scientific Articles.

PubMed

Grandizio, Louis C; Shim, Stephanie S; Graham, Jove; Costopoulos, Callista; Cush, Gerard; Klena, Joel C

2016-01-01

In the era of evidence-based medicine, understanding study design and levels of evidence (LoE) criteria is an important component of resident education and aids practicing surgeons in making informed clinical decisions. The purpose of this study is to analyze the ability of orthopedic residents to accurately determine LoE criteria for published articles compared with medical students. Basic science article. Geisinger Medical Center (Danville, PA), tertiary referral center. Overall, 25 U.S. orthopedic residents and 15 4th year medical students interviewing for a residency position in orthopedic surgery voluntarily participated and provided baseline demographic information. A total of 15 articles from the American Volume of Journal of Bone and Joint Surgery were identified. Study participants were provided with the article title, the abstract, and the complete methods section. The assigned LoE designation was withheld and access to the LoE criteria used by Journal of Bone and Joint Surgery was provided. Each participant was assigned a study type and LoE designation for each article. There were more correct responses regarding the article type (67%) than for LoE designation (39%). For LoE, the intraclass correlation coefficient was 0.30. The percentage of correct responses for article type and LoE increased with more years of training (p = 0.005 and p = 0.002). Although residents had a higher proportion of correct LoE responses overall than medical students, this difference did not reach statistical significance (42% vs. 35%, p = 0.07). Although improvements in accurately determining both article type and LoE were seen among residents with increasing years of training, residents were unable to demonstrate a statistically significant improvement for determining LoE or article type when compared with medical students. Strategies to improve resident understanding of LoE guidelines need to be incorporated into orthopedic residencies, especially when considering the increased emphasis on evidence-based medicine. Copyright © 2016 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Exercise therapy and other types of physical therapy for patients with neuromuscular diseases: a systematic review.

PubMed

Cup, Edith H; Pieterse, Allan J; Ten Broek-Pastoor, Jessica M; Munneke, Marten; van Engelen, Baziel G; Hendricks, Henk T; van der Wilt, Gert J; Oostendorp, Rob A

2007-11-01

To summarize and critically appraise the available evidence on exercise therapy and other types of physical therapies for patients with neuromuscular diseases (NMD). Cochrane Central Register of Controlled Trials and Cochrane Database of Systematic Reviews, Medline, CINAHL, EMBASE (Rehabilitation and Physical Medicine), and reference lists of reviews and articles. Randomized clinical trials (RCTs), controlled clinical trials (CCTs), and other designs were included. Study participants had to have any of the following types of NMD: motoneuron diseases, disorders of the motor nerve roots or peripheral nerves, neuromuscular transmission disorders, or muscle diseases. All types of exercise therapy and other physical therapy modalities were included. Outcome measures had to be at the level of body functions, activities, or participation according to the definitions of the International Classification of Functioning, Disability and Health (ICF). Two reviewers independently decided on inclusion or exclusion of articles and rated the methodologic quality of the studies included. All RCTs, CCTs, and other designs only if of sufficient methodologic quality were included in a best evidence synthesis. A level of evidence was attributed for each subgroup of NMD and each type of intervention. Initially 58 studies were included: 12 RCTs, 5 CCTs, and 41 other designs. After methodologic assessment, 19 other designs were excluded from further analysis. There is level II evidence ("likely to be effective") for strengthening exercises in combination with aerobic exercises for patients with muscle disorders. Level III evidence ("indications of effectiveness") was found for aerobic exercises in patients with muscle disorders and for the combination of muscle strengthening and aerobic exercises in a heterogeneous group of muscle disorders. Finally, there is level III evidence for breathing exercises for patients with myasthenia gravis and for patients with myotonic muscular dystrophy. Adverse effects of exercise therapy were negligible. The available evidence is limited, but relevant for clinicians. Future studies should be preferably multicentered, and use an international classification of the variables of exercise therapy and an ICF core set for NMD in order to improve comparability of results.

Individual differences in behavioural plasticities.

PubMed

Stamps, Judy A

2016-05-01

Interest in individual differences in animal behavioural plasticities has surged in recent years, but research in this area has been hampered by semantic confusion as different investigators use the same terms (e.g. plasticity, flexibility, responsiveness) to refer to different phenomena. The first goal of this review is to suggest a framework for categorizing the many different types of behavioural plasticities, describe examples of each, and indicate why using reversibility as a criterion for categorizing behavioural plasticities is problematic. This framework is then used to address a number of timely questions about individual differences in behavioural plasticities. One set of questions concerns the experimental designs that can be used to study individual differences in various types of behavioural plasticities. Although within-individual designs are the default option for empirical studies of many types of behavioural plasticities, in some situations (e.g. when experience at an early age affects the behaviour expressed at subsequent ages), 'replicate individual' designs can provide useful insights into individual differences in behavioural plasticities. To date, researchers using within-individual and replicate individual designs have documented individual differences in all of the major categories of behavioural plasticities described herein. Another important question is whether and how different types of behavioural plasticities are related to one another. Currently there is empirical evidence that many behavioural plasticities [e.g. contextual plasticity, learning rates, IIV (intra-individual variability), endogenous plasticities, ontogenetic plasticities) can themselves vary as a function of experiences earlier in life, that is, many types of behavioural plasticity are themselves developmentally plastic. These findings support the assumption that differences among individuals in prior experiences may contribute to individual differences in behavioural plasticities observed at a given age. Several authors have predicted correlations across individuals between different types of behavioural plasticities, i.e. that some individuals will be generally more plastic than others. However, empirical support for most of these predictions, including indirect evidence from studies of relationships between personality traits and plasticities, is currently sparse and equivocal. The final section of this review suggests how an appreciation of the similarities and differences between different types of behavioural plasticities may help theoreticians formulate testable models to explain the evolution of individual differences in behavioural plasticities and the evolutionary and ecological consequences of individual differences in behavioural plasticities. © 2015 Cambridge Philosophical Society.

Using a contextualized sensemaking model for interaction design: A case study of tumor contouring.

PubMed

Aselmaa, Anet; van Herk, Marcel; Laprie, Anne; Nestle, Ursula; Götz, Irina; Wiedenmann, Nicole; Schimek-Jasch, Tanja; Picaud, Francois; Syrykh, Charlotte; Cagetti, Leonel V; Jolnerovski, Maria; Song, Yu; Goossens, Richard H M

2017-01-01

Sensemaking theories help designers understand the cognitive processes of a user when he/she performs a complicated task. This paper introduces a two-step approach of incorporating sensemaking support within the design of health information systems by: (1) modeling the sensemaking process of physicians while performing a task, and (2) identifying software interaction design requirements that support sensemaking based on this model. The two-step approach is presented based on a case study of the tumor contouring clinical task for radiotherapy planning. In the first step of the approach, a contextualized sensemaking model was developed to describe the sensemaking process based on the goal, the workflow and the context of the task. In the second step, based on a research software prototype, an experiment was conducted where three contouring tasks were performed by eight physicians respectively. Four types of navigation interactions and five types of interaction sequence patterns were identified by analyzing the gathered interaction log data from those twenty-four cases. Further in-depth study on each of the navigation interactions and interaction sequence patterns in relation to the contextualized sensemaking model revealed five main areas for design improvements to increase sensemaking support. Outcomes of the case study indicate that the proposed two-step approach was beneficial for gaining a deeper understanding of the sensemaking process during the task, as well as for identifying design requirements for better sensemaking support. Copyright © 2016. Published by Elsevier Inc.

Effectiveness of a Computer-Tailored Print-Based Physical Activity Intervention among French Canadians with Type 2 Diabetes in a Real-Life Setting

ERIC Educational Resources Information Center

Boudreau, Francois; Godin, Gaston; Poirier, Paul

2011-01-01

The promotion of regular physical activity for people with type 2 diabetes poses a challenge for public health authorities. The purpose of this study was to evaluate the efficiency of a computer-tailoring print-based intervention to promote the adoption of regular physical activity among people with type 2 diabetes. An experimental design was…

Color universal design: analysis of color category dependency on color vision type (4)

NASA Astrophysics Data System (ADS)

Ikeda, Tomohiro; Ichihara, Yasuyo G.; Kojima, Natsuki; Tanaka, Hisaya; Ito, Kei

2013-02-01

This report is af ollow-up to SPIE-IS+T / Vol. 7528 7528051-8, SPIE-IS+T / Vol. 7866 78660J-1-8 and SPIE-IS+T / Vol. 8292 829206-1-8. Colors are used to communicate information in various situations, not just for design and apparel. However, visual information given only by color may be perceived differently by individuals with different color vision types. Human color vision is non-uniform and the variation in most cases is genetically linked to L-cones and M-cones. Therefore, color appearance is not the same for all color vision types. Color Universal Design is an easy-to-understand system that was created to convey color-coded information accurately to most people, taking color vision types into consideration. In the present research, we studied trichromat (C-type), prolan (P-type), and deutan (D-type) forms of color vision. We here report the result of two experiments. The first was the validation of the confusion colors using the color chart on CIELAB uniform color space. We made an experimental color chart (total of color cells is 622, the color difference between color cells is 2.5) for fhis experiment, and subjects have P-type or D-type color vision. From the data we were able to determine "the limits with high probability of confusion" and "the limits with possible confusion" around various basing points. The direction of the former matched with the theoretical confusion locus, but the range did not extend across the entire a* range. The latter formed a belt-like zone above and below the theoretical confusion locus. This way we re-analyzed a part of the theoretical confusion locus suggested by Pitt-Judd. The second was an experiment in color classification of the subjects with C-type, P-type, or D-type color vision. The color caps of fhe 100 Hue Test were classified into seven categories for each color vision type. The common and different points of color sensation were compared for each color vision type, and we were able to find a group of color caps fhat people with C-, P-, and D-types could all recognize as distinguishable color categories. The result could be used as the basis of a color scheme for future Color Universal Design.

Development of external and neutrally buoyant acoustic transmitters for turbine passage evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deng, Zhiqun; Brown, Richard S.; Carlson, Thomas J.

Recent studies show transmitters surgically implanted into juvenile salmonids, for the purposes of estimating survival of fish passing through turbines, increases the risk of injury and mortality due to the presence of the tag and exposure to rapid turbine pressure changes. Neutrally buoyant external tags may instead be used to eliminate this bias. However, the externally tagged fish could be affected by other factors such as shear and turbulence which may also bias survival estimates. Studies have been conducted to examine the influence of shear and turbulence on non-tagged juvenile salmonids, however, tests have never been conducted in the laboratorymore » or field to determine the influence of shear and turbulence on retention and injury related to attachment of external transmitters. We designed and manufactured two different configurations of neutrally buoyant (nearly zero g weight in water) external transmitters: Type A and Type B. The Type A transmitters weigh approximately 0.60 g in air and are attached to fish using two sutures anterior to the dorsal fin. The Type B transmitters weigh approximately 0.83 g in air and consist of battery part and transducer part with both parts neutrally buoyant. They are attached to both sides of the dorsal fin using two enamel coated 25 gauge magnet wires. This study provides a broad approach using evaluation measures such as holding, swimming performance, shear, turbulence, rapid decompression exposures, and predation to determine the efficacy of using neutrally buoyant external transmitters to estimate survival of juvenile salmonids passing through turbines. Preliminary results show the Type A design is a viable design for turbine passage evaluation and is being planned for field deployment in the near future.« less

A Usability Study of Users’ Perceptions Toward a Multimedia Computer-Assisted Learning Tool for Neuroanatomy

PubMed Central

Gould, Douglas J.; Terrell, Mark A.; Fleming, Jo

2015-01-01

This usability study evaluated users’ perceptions of a multimedia prototype for a new e-learning tool: Anatomy of the Central Nervous System: A Multimedia Course. Usability testing is a collection of formative evaluation methods that inform the developmental design of e-learning tools to maximize user acceptance, satisfaction, and adoption. Sixty-two study participants piloted the prototype and completed a usability questionnaire designed to measure two usability properties: program need and program applicability. Statistical analyses were used to test the hypothesis that the multimedia prototype was well designed and highly usable, it was perceived as: 1) highly needed across a spectrum of educational contexts, 2) highly applicable in supporting the pedagogical processes of teaching and learning neuroanatomy, and 3) was highly usable by all types of users. Three independent variables represented user differences: level of expertise (faculty vs. student), age, and gender. Analysis of the results supports the research hypotheses that the prototype was designed well for different types of users in various educational contexts and for supporting the pedagogy of neuroanatomy. In addition, the results suggest that the multimedia program will be most useful as a neuroanatomy review tool for health-professions students preparing for licensing or board exams. This study demonstrates the importance of integrating quality properties of usability with principles of human learning during the instructional design process for multimedia products. PMID:19177405

Special Features of Using Secondary Materials in the Interior Design of Public Dining Establishments

NASA Astrophysics Data System (ADS)

Kuznetsova, Irina; Hapchuk, Olena; Lukinov, Vitaly

2017-10-01

This article analyses the latest publications studying the use and practical application of secondary resources as raw materials in design. This analysis is based on the list of secondary resources and their applications in interior decoration. In particular, the interiors of public catering enterprises were analysed. Restaurants with different functional purposes that were classified into several categories with specific peculiarities of interior design were identified. This article presents and describes different types of public catering enterprises based on those categories. The interior design of a public catering enterprise is regarded as a considerably complex system. Different types of secondary materials were reviewed to identify the most frequently used materials for interior space design. This article describes the main peculiarities of the use of secondary materials and presents examples of their practical application. The function of secondary materials in the interior design of public catering enterprises were detected and reviewed. On the basis of the analysis, several directions for the practical application of our results in the field of public catering enterprise design were suggested.

Case Study of 'Engineering Peer Meetings' in JPL's ST-6 Project

NASA Technical Reports Server (NTRS)

Chao, Lawrence P.; Tumer, Irem

2004-01-01

This design process error-proofing case study describes a design review practice implemented by a project manager at NASA Jet Propulsion Laboratory. There are many types of reviews at NASA: required and not, formalized and informal, programmatic and technical. Standing project formal reviews such as the Preliminary Design Review (PDR) and Critical Design Review (CDR) are a required part of every project and mission development. However, the engineering peer reviews that support teams technical work on such projects are often informal, ad hoc, and inconsistent across the organization. This case study discusses issues and innovations identified by a project manager at JPL and implemented in 'engineering peer meetings' for his group.

Case Study of "Engineering Peer Meetings" in JPL's ST-6 Project

NASA Technical Reports Server (NTRS)

Tumer, Irem Y.; Chao, Lawrence P.

2003-01-01

This design process error-proofing case study describes a design review practice implemented by a project manager at NASA Jet Propulsion Laboratory. There are many types of reviews at NASA: required and not, formalized and informal, programmatic and technical. Standing project formal reviews such as the Preliminary Design Review (PDR) and Critical Design Review (CDR) are a required part of every project and mission development. However, the engineering peer reviews that support teams technical work on such projects are often informal, ad hoc, and inconsistent across the organization. This case study discusses issues and innovations identified by a project manager at JPL and implemented in "engineering peer meetings" for his group.

Influence of the positive prewhirl on the performance of centrifugal pumps with different airfoils

NASA Astrophysics Data System (ADS)

Zhou, C. M.; Wang, H. M.; Huang, X.; Lin, H.

2012-11-01

According to the basic theory of turbomachinery design and inlet guide vanes prewhirl regulation, two different airfoils inlet guide vanes of prewhirl regulation device were designed, the influence of the positive prewhirl to the performance of centrifugal pump were studied based on different airfoils. The results show that, for a single-suction centrifugal pump: Gottingen bowed blade-type inlet guide vane adjustment effect is better than straight blade-type inlet guide; appropriate design of positive prewhirl can elevate the efficiency of centrifugal pumps. Compared with no vane conditions, the efficiency of centrifugal pump with prewhirl vanes has been greatly improved and the power consumption has been reduced significantly, while has little influence on the head.

Evaluation available encapsulation materials for low-cost long-life silicon photovoltaic arrays

NASA Technical Reports Server (NTRS)

Carmichael, D. C.; Gaines, G. B.; Noel, G. T.; Sliemers, F. A.; Nance, G. P.; Bunk, A. R.; Brockway, M. C.

1978-01-01

Experimental evaluation of selected encapsulation designs and materials based on an earlier study which have potential for use in low cost, long-life photovoltaic arrays are reported. The performance of candidate materials and encapsulated cells were evaluated principally for three types of encapsulation designs based on their potentially low materials and processing costs: (1) polymeric coatings, transparent conformal coatings over the cell with a structural-support substrate; (2) polymeric film lamination, cells laminated between two films or sheets of polymeric materials; and (3) glass-covered systems, cells adhesively bonded to a glass cover (superstrate) with a polymeric pottant and a glass or other substrate material. Several other design types, including those utilizing polymer sheet and pottant materials, were also included in the investigation.

Study of the application of hydrogen fuel to long-range subsonic transport aircraft. Volume 1: Summary

NASA Technical Reports Server (NTRS)

Brewer, G. D.; Morris, R. E.; Lange, R. H.; Moore, J. W.

1975-01-01

The feasibility of using liquid hydrogen as fuel in advanced designs of long range, subsonic transport aircraft is assessed. Both passenger and cargo type aircraft are investigated. Comparisons of physical, performance, and economic parameters of the LH2 fueled designs with conventionally fueled aircraft are presented. Design studies are conducted to determine appropriate characteristics for the hydrogen related systems required on board the aircraft. These studies included consideration of material, structural, and thermodynamic requirements of the cryogenic fuel tanks and fuel systems with the structural support and thermal protection systems.

[Design and implementation of the ELSA-Brasil biobank: a prospective study in a Brazilian population].

PubMed

Pereira, Alexandre C; Bensenor, Isabela M; Fedeli, Ligia M; Castilhos, Cristina; Vidigal, Pedro G; Maniero, Viviane; Leite, Claudia M; Pimentel, Robercia A; Duncan, Bruce B; Mill, Jose Geraldo; Lotufo, Paulo A

2013-06-01

The Brazilian Longitudinal Study for Adult Health (ELSA-Brasil) is a multicenter prospective cohort of civil servants designed to assess the determinants of chronic diseases, especially cardiovascular diseases and type 2 diabetes. The present article describes the main design and implementation points of the ELSA-Brasil biobank project. Economic, political, logistical and technological aspects of this study are characterized. Additionally, it discusses the final biorepository protocol and the facilities implemented to achieve this objective. The design and implementation process of the ELSA-Brasil biobank took three years to be performed. Both the central and local biobanks were built according to the best biorepository techniques, using different technological solutions for the distinct needs expected in this study.

Epitope design of L1 protein for vaccine production against Human Papilloma Virus types 16 and 18

PubMed Central

Baidya, Sunanda; Das, Rasel; Kabir, Md. Golam; Arifuzzaman, Md.

2017-01-01

Cervical cancer accounts for about two-thirds of all cancer cases linked etiologically to Human Papilloma Virus (HPV). 15 oncogenic HPV types can cause cervical cancer, of which HPV16 and HPV18 combinedly account for about 70% of it. So, effective epitope design for the clinically relevant HPV types 16 and 18 would be of major medical benefit. Here, a comprehensive analysis is carried out to predict the epitopes against HPV types 16 and 18 through “reverse vaccinology” approach. We attempted to identify the evolutionarily conserved regions of major capsid protein (L1) as well as minor capsid protein (L2) of HPV and designed epitopes within these regions. In this study, we analyzed about 49 and 27 sequences of HPV L2 and L1 proteins respectively. Since we found that the intertype variability of L2 is higher than for L1 proteins, our analysis was emphasized on epitopes of L1 of HPV types 16 and 18. We had selected HLA-A*0201, DRB1*1501, DQB1*0602, DRB1*0401 and DQB1*0301 alleles for the prediction of T cell epitopes of L1 of HPV 16 and 18. Finally, we reported that predicted epitope sequences EEYDLQFIFQLCKITLTA, and RHGEEYDLQFIFQLCKITLTA of L1 protein of HPV 16, and LPDPNKF, PETQRLVWAC, PVPGQYDA, YNPETQRLVWAC, DTGYGAMD, PVPGQYDATK, KQDIPKVSAYQYRVFRV, RDNVSVDYKQTQLCI and YSRHVEEYDLQFIF of L1 protein of HPV 18 could be therapeutic tools for vaccine design against HPV. PMID:28584449

Epitope design of L1 protein for vaccine production against Human Papilloma Virus types 16 and 18.

PubMed

Baidya, Sunanda; Das, Rasel; Kabir, Md Golam; Arifuzzaman, Md

2017-01-01

Cervical cancer accounts for about two-thirds of all cancer cases linked etiologically to Human Papilloma Virus (HPV). 15 oncogenic HPV types can cause cervical cancer, of which HPV16 and HPV18 combinedly account for about 70% of it. So, effective epitope design for the clinically relevant HPV types 16 and 18 would be of major medical benefit. Here, a comprehensive analysis is carried out to predict the epitopes against HPV types 16 and 18 through "reverse vaccinology" approach. We attempted to identify the evolutionarily conserved regions of major capsid protein (L1) as well as minor capsid protein (L2) of HPV and designed epitopes within these regions. In this study, we analyzed about 49 and 27 sequences of HPV L2 and L1 proteins respectively. Since we found that the intertype variability of L2 is higher than for L1 proteins, our analysis was emphasized on epitopes of L1 of HPV types 16 and 18. We had selected HLA-A*0201, DRB1*1501, DQB1*0602, DRB1*0401 and DQB1*0301 alleles for the prediction of T cell epitopes of L1 of HPV 16 and 18. Finally, we reported that predicted epitope sequences EEYDLQFIFQLCKITLTA, and RHGEEYDLQFIFQLCKITLTA of L1 protein of HPV 16, and LPDPNKF, PETQRLVWAC, PVPGQYDA, YNPETQRLVWAC, DTGYGAMD, PVPGQYDATK, KQDIPKVSAYQYRVFRV, RDNVSVDYKQTQLCI and YSRHVEEYDLQFIF of L1 protein of HPV 18 could be therapeutic tools for vaccine design against HPV.

49 CFR 176.78 - Use of power-operated industrial trucks on board vessels.

Code of Federal Regulations, 2014 CFR

2014-10-01

... designation. (c) Description of designations. The recognized testing laboratory type designations are as... mechanism is a type that prevents road reactions from causing the steering handwheel to spin, a mushroom type steering knob must be used to engage the palm of the operator's hand, or the steering mechanism...

49 CFR 176.78 - Use of power-operated industrial trucks on board vessels.

Code of Federal Regulations, 2012 CFR

2012-10-01

... designation. (c) Description of designations. The recognized testing laboratory type designations are as... mechanism is a type that prevents road reactions from causing the steering handwheel to spin, a mushroom type steering knob must be used to engage the palm of the operator's hand, or the steering mechanism...

49 CFR 176.78 - Use of power-operated industrial trucks on board vessels.

Code of Federal Regulations, 2013 CFR

2013-10-01

... designation. (c) Description of designations. The recognized testing laboratory type designations are as... mechanism is a type that prevents road reactions from causing the steering handwheel to spin, a mushroom type steering knob must be used to engage the palm of the operator's hand, or the steering mechanism...

Case-Crossover Analysis of Air Pollution Health Effects: A Systematic Review of Methodology and Application

PubMed Central

Carracedo-Martínez, Eduardo; Taracido, Margarita; Tobias, Aurelio; Saez, Marc; Figueiras, Adolfo

2010-01-01

Background Case-crossover is one of the most used designs for analyzing the health-related effects of air pollution. Nevertheless, no one has reviewed its application and methodology in this context. Objective We conducted a systematic review of case-crossover (CCO) designs used to study the relationship between air pollution and morbidity and mortality, from the standpoint of methodology and application. Data sources and extraction A search was made of the MEDLINE and EMBASE databases. Reports were classified as methodologic or applied. From the latter, the following information was extracted: author, study location, year, type of population (general or patients), dependent variable(s), independent variable(s), type of CCO design, and whether effect modification was analyzed for variables at the individual level. Data synthesis The review covered 105 reports that fulfilled the inclusion criteria. Of these, 24 addressed methodological aspects, and the remainder involved the design’s application. In the methodological reports, the designs that yielded the best results in simulation were symmetric bidirectional CCO and time-stratified CCO. Furthermore, we observed an increase across time in the use of certain CCO designs, mainly symmetric bidirectional and time-stratified CCO. The dependent variables most frequently analyzed were those relating to hospital morbidity; the pollutants most often studied were those linked to particulate matter. Among the CCO-application reports, 13.6% studied effect modification for variables at the individual level. Conclusions The use of CCO designs has undergone considerable growth; the most widely used designs were those that yielded better results in simulation studies: symmetric bidirectional and time-stratified CCO. However, the advantages of CCO as a method of analysis of variables at the individual level are put to little use. PMID:20356818

Governmental designation of spine specialty hospitals, their characteristics, performance and designation effects: a longitudinal study in Korea.

PubMed

Kim, Sun Jung; Yoo, Ji Won; Lee, Sang Gyu; Kim, Tae Hyun; Han, Kyu-Tae; Park, Eun-Cheol

2014-11-13

This study compares the characteristics and performance of spine specialty hospitals versus other types of hospitals for inpatients with spinal diseases in South Korea. We also assessed the effect of the government's specialty hospital designation on hospital operating efficiency. We used data of 823 hospitals including 17 spine specialty hospitals in Korea. All spine disease-related inpatient claims nationwide (N=645 449) during 2010-2012. No interventions were made. Using a multilevel generalised estimating equation and multilevel modelling, this study compared inpatient charges, length of stay (LOS), readmission within 30 days of discharge and in-hospital death within 30 days of admission in spine specialty versus other types of hospitals. Spine specialty hospitals had higher inpatient charges per day (27.4%) and a shorter LOS (23.5%), but per case charges were similar after adjusting for patient-level and hospital-level confounders. After government designation, spine specialty hospitals had 8.8% lower per case charges, which was derived by reduced per day charge (7.6%) and shorter LOS (1.0%). Rates of readmission also were lower in spine specialty hospitals (OR=0.796). Patient-level and hospital-level factors both played important roles in determining outcome measures. Spine specialty hospitals had higher per day inpatient charges but a much shorter LOS than other types of hospitals due to their specialty volume and experience. In addition, their readmission rate was lower. Spine specialty hospitals also endeavoured to be more efficient after governmental 'specialty' designation. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

A Comparison of Learning Cultures in Different Sizes and Types

ERIC Educational Resources Information Center

Brown, Paula D.; Finch, Kim S.; MacGregor, Cynthia

2012-01-01

This study compared relevant data and information about leadership and learning cultures in different sizes and types of high schools. Research was conducted using a quantitative design with a qualitative element. Quantitative data were gathered using a researcher-created survey. Independent sample t-tests were conducted to analyze the means of…

Counterpoint Piece: The Case for Variety in Corrective Feedback Research

ERIC Educational Resources Information Center

Lyster, Roy; Ranta, Leila

2013-01-01

Goo and Mackey (this issue) outline several apparent design flaws in studies that have compared the impact of different types of corrective feedback (CF). Furthermore, they argue that SLA researchers should stop comparing recasts to other types of CF because they are inherently different kinds of phenomena. Our response to their article addresses…

Examining Multiple Dimensions of Word Knowledge for Content Vocabulary Understanding

ERIC Educational Resources Information Center

Cervetti, Gina N.; Tilson, Jennifer L.; Castek, Jill; Bravo, Marco A.; Trainin, Guy

2012-01-01

This study traces the development of a vocabulary measure designed to assess multiple types of word knowledge. The assessment, which was administered in conjunction with a science unit about weather and the water cycle for third-and-fourth graders, included items for six knowledge types--recognition, definition, classification/example, context,…

An inulin-type fructan enhances calcium absorption primarily via an effect on colonic absorption in humans

USDA-ARS?s Scientific Manuscript database

Calcium absorption efficiency and bone mineral mass are increased in adolescents who regularly consume inulin-type fructans (ITF). The mechanism of action in increasing absorption is unknown but may be related to increased colonic calcium absorption. We conducted a study in young adults designed to ...

Examining Achievement Goals and Causal Attributions Together as Predictors of Academic Functioning

ERIC Educational Resources Information Center

Wolters, Christopher A.; Fan, Weihua; Daugherty, Stacy G.

2013-01-01

This study was designed to forge stronger theoretical and empirical links between achievement goal theory and attribution theory. High school students ("N" = 224) completed a self-report survey that assessed 3 types of achievement goals, 7 types of attributions, and self-efficacy. Results indicated that students' adoption of achievement…

Popularity in Early Adolescence: Prosocial and Antisocial Subtypes

ERIC Educational Resources Information Center

de Bruyn, Eddy H.; Cillessen, Antonius H. N.

2006-01-01

The present study was designed to examine early adolescents' stereotypical descriptions of two types of youth who are seen as popular by their peers. Participants were 13- to 14-year-old early adolescents (N = 287). The results indicated that early adolescents distinguished two types of popular peers: a "populistic" (popular but not…

Effective Treatments of Late-Life Depression in Long-Term Care Facilities: A Systematic Review

ERIC Educational Resources Information Center

Yoon, Seokwon; Moon, Sung Seek; Pitner, Ronald

2018-01-01

Purpose: The purpose of this study was to identify effective treatment to manage the depression of older residents. Methods: Using Klein and Bloom's criteria, we analyzed the number of subjects, designs and methodologies, residential types, intervention types and duration of treatment, standardized measures, and findings. Data searches were…

Testing Moderator and Mediator Effects in Counseling Psychology Research

ERIC Educational Resources Information Center

Frazier, Patricia A.; Tix, Andrew P.; Barron, Kenneth E.

2004-01-01

The goals of this article are to (a) describe differences between moderator and mediator effects; (b) provide nontechnical descriptions of how to examine each type of effect, including study design, analysis, and interpretation of results; (c) demonstrate how to analyze each type of effect; and (d) provide suggestions for further reading. The…

Type of Violence, Age, and Gender Differences in the Effects of Family Violence on Children's Behavior Problems: A Mega-Analysis

ERIC Educational Resources Information Center

Sternberg, Kathleen J.; Baradaran, Laila P.; Abbott, Craig B.; Lamb, Michael E.; Guterman, Eva

2006-01-01

A mega-analytic study was designed to exploit the power of a large data set combining raw data from multiple studies (n=1870) to examine the effects of type of family violence, age, and gender on children's behavior problems assessed using the Child Behavior Checklist (CBCL). Our findings confirmed that children who experienced multiple forms of…

Conceptual Design, Feasibility and Payoff Analysis of a Third Stage for EELV

DTIC Science & Technology

2014-06-01

the overall vehicle architecture, identifying locations for modification or stage shape. Trade studies of various propellant types (LOX/ LH2 , LOX/RP...or stage shape. Trade studies of various propellant types (LOX/ LH2 , LOX/RP, LOX/methane, hydrazine monopropellant) were included in the analysis...Geostationary transfer orbit Isp = Specific impulse LEO = Low Earth Orbit LOX = Liquid oxygen LH2 = Liquid hydrogen POST = Program to

Characterizing Provenance in Visualization and Data Analysis: An Organizational Framework of Provenance Types and Purposes.

PubMed

Ragan, Eric D; Endert, Alex; Sanyal, Jibonananda; Chen, Jian

2016-01-01

While the primary goal of visual analytics research is to improve the quality of insights and findings, a substantial amount of research in provenance has focused on the history of changes and advances throughout the analysis process. The term, provenance, has been used in a variety of ways to describe different types of records and histories related to visualization. The existing body of provenance research has grown to a point where the consolidation of design knowledge requires cross-referencing a variety of projects and studies spanning multiple domain areas. We present an organizational framework of the different types of provenance information and purposes for why they are desired in the field of visual analytics. Our organization is intended to serve as a framework to help researchers specify types of provenance and coordinate design knowledge across projects. We also discuss the relationships between these factors and the methods used to capture provenance information. In addition, our organization can be used to guide the selection of evaluation methodology and the comparison of study outcomes in provenance research.

Characterizing Provenance in Visualization and Data Analysis: An Organizational Framework of Provenance Types and Purposes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ragan, Eric; Alex, Endert; Sanyal, Jibonananda

While the primary goal of visual analytics research is to improve the quality of insights and findings, a substantial amount of research in provenance has focused on the history of changes and advances throughout the analysis process. The term, provenance, has been used in a variety of ways to describe different types of records and histories related to visualization. The existing body of provenance research has grown to a point where the consolidation of design knowledge requires cross-referencing a variety of projects and studies spanning multiple domain areas. We present an organizational framework of the different types of provenance informationmore » and purposes for why they are desired in the field of visual analytics. Our organization is intended to serve as a framework to help researchers specify types of provenance and coordinate design knowledge across projects. We also discuss the relationships between these factors and the methods used to capture provenance information. In addition, our organization can be used to guide the selection of evaluation methodology and the comparison of study outcomes in provenance research« less

Characterizing Provenance in Visualization and Data Analysis: An Organizational Framework of Provenance Types and Purposes

DOE PAGES

Ragan, Eric; Alex, Endert; Sanyal, Jibonananda; ...

2016-01-01

While the primary goal of visual analytics research is to improve the quality of insights and findings, a substantial amount of research in provenance has focused on the history of changes and advances throughout the analysis process. The term, provenance, has been used in a variety of ways to describe different types of records and histories related to visualization. The existing body of provenance research has grown to a point where the consolidation of design knowledge requires cross-referencing a variety of projects and studies spanning multiple domain areas. We present an organizational framework of the different types of provenance informationmore » and purposes for why they are desired in the field of visual analytics. Our organization is intended to serve as a framework to help researchers specify types of provenance and coordinate design knowledge across projects. We also discuss the relationships between these factors and the methods used to capture provenance information. In addition, our organization can be used to guide the selection of evaluation methodology and the comparison of study outcomes in provenance research« less

Numerical analysis on centrifugal compressor with membrane type dryer

NASA Astrophysics Data System (ADS)

Razali, M. A.; Zulkafli, M. F.; Mat Isa, N.; Subari, Z.

2017-09-01

Moisture content is a common phenomenon in industrial processes especially in oil and gas industries. This contaminant has a lot of disadvantages which can lead to mechanical failure DEC (Deposition, Erosion & Corrosion) problems. To overcome DEC problem, this study proposed to design a centrifugal compressor with a membrane type dryer to reduce moisture content of a gas. The effectiveness of such design has been analyzed in this study using Computational Fluid Dynamics (CFD) approach. Numerical scheme based on multiphase flow technique is used in ANSYS Fluent software to evaluate the moisture content of the gas. Through this technique, two kind of centrifugal compressor, with and without membrane type dryer has been tested. The results show that the effects of pressure on dew point temperature of the gas change the composition of its moisture content, where high value lead more condensation to occur. However, with the injection of cool dry gas through membrane type dryer in the centrifugal compressor, the pressure and temperature of moisture content as well as mass fraction of H2O in centrifugal compressor show significant reduction.

Investigating measurement equivalence of visual analogue scales and Likert-type scales in Internet-based personality questionnaires.

PubMed

Kuhlmann, Tim; Dantlgraber, Michael; Reips, Ulf-Dietrich

2017-12-01

Visual analogue scales (VASs) have shown superior measurement qualities in comparison to traditional Likert-type response scales in previous studies. The present study expands the comparison of response scales to properties of Internet-based personality scales in a within-subjects design. A sample of 879 participants filled out an online questionnaire measuring Conscientiousness, Excitement Seeking, and Narcissism. The questionnaire contained all instruments in both answer scale versions in a counterbalanced design. Results show comparable reliabilities, means, and SDs for the VAS versions of the original scales, in comparison to Likert-type scales. To assess the validity of the measurements, age and gender were used as criteria, because all three constructs have shown non-zero correlations with age and gender in previous research. Both response scales showed a high overlap and the proposed relationships with age and gender. The associations were largely identical, with the exception of an increase in explained variance when predicting age from the VAS version of Excitement Seeking (B10 = 1318.95, ΔR(2) = .025). VASs showed similar properties to Likert-type response scales in most cases.

Compliance Patterns and Utilization of e-Health for Glucose Monitoring: Standalone Internet Gateway and Tablet Device.

PubMed

Rho, Mi Jung; Kim, Hun-Sung; Yoon, Kun-Ho; Choi, In Young

2017-04-01

Knowledge regarding compliance patterns and service utilization in e-health is important for the development of effective services. To develop proper e-health, the characteristics of compliance patterns and utilization of e-health should be studied. We studied these for glucose monitoring of diabetic patients from primary clinics. Data were collected from 160 outpatients who participated in e-health for glucose monitoring funded by the Korean government. Specifically, this study focused on two device types: a standalone Internet gateway and a tablet device. The SPSS 18.0 software was used for statistical analyses of demographic characteristics, survival data, and Cox proportional hazards regression model. Standalone Internet gateway users demonstrated a more stable compliance pattern than did tablet device users. The compliance rate differed according to the device type. Typically, compliance decreases considerably around 8 months. In these results, standalone Internet gateway users utilized the service for longer periods than tablet device users. Gateway type and location also influenced utilization (p < 0.05). The service should be designed according to the device type to develop appropriate service models. Thus, service designers should understand the different characteristics of service devices. This study provides insight into compliance patterns and utilization to develop appropriate service models and service interventions depending on the device.

Optimization Design of Bipolar Plate Flow Field in PEM Stack

NASA Astrophysics Data System (ADS)

Wen, Ming; He, Kanghao; Li, Peilong; Yang, Lei; Deng, Li; Jiang, Fei; Yao, Yong

2017-12-01

A new design of bipolar plate flow field in proton exchange membrane (PEM) stack was presented to develop a high-performance transfer efficiency of the two-phase flow. Two different flow fields were studied by using numerical simulations and the performance of the flow fields was presented. the hydrodynamic properties include pressure gap between inlet and outlet, the Reynold’s number of the two types were compared based on the Navier-Stokes equations. Computer aided optimization software was implemented in the design of experiments of the preferable flow field. The design of experiments (DOE) for the favorable concept was carried out to study the hydrodynamic properties when changing the design parameters of the bipolar plate.

Optimization of LDL targeted nanostructured lipid carriers of 5-FU by a full factorial design.

PubMed

Andalib, Sare; Varshosaz, Jaleh; Hassanzadeh, Farshid; Sadeghi, Hojjat

2012-01-01

Nanostructured lipid carriers (NLC) are a mixture of solid and liquid lipids or oils as colloidal carrier systems that lead to an imperfect matrix structure with high ability for loading water soluble drugs. The aim of this study was to find the best proportion of liquid and solid lipids of different types for optimization of the production of LDL targeted NLCs used in carrying 5-Fu by the emulsification-solvent evaporation method. The influence of the lipid type, cholesterol or cholesteryl stearate for targeting LDL receptors, oil type (oleic acid or octanol), lipid and oil% on particle size, surface charge, drug loading efficiency, and drug released percent from the NLCs were studied by a full factorial design. The NLCs prepared by 54.5% cholesterol and 25% of oleic acid, showed optimum results with particle size of 105.8 nm, relatively high zeta potential of -25 mV, drug loading efficiency of 38% and release efficiency of about 40%. Scanning electron microscopy of nanoparticles confirmed the results of dynamic light scattering method used in measuring the particle size of NLCs. The optimization method by a full factorial statistical design is a useful optimization method for production of nanostructured lipid carriers.

Modified method to improve the design of Petlyuk distillation columns

PubMed Central

2014-01-01

Background A response surface analysis was performed to study the effect of the composition and feeding thermal conditions of ternary mixtures on the number of theoretical stages and the energy consumption of Petlyuk columns. A modification of the pre-design algorithm was necessary for this purpose. Results The modified algorithm provided feasible results in 100% of the studied cases, compared with only 8.89% for the current algorithm. The proposed algorithm allowed us to attain the desired separations, despite the type of mixture and the operating conditions in the feed stream, something that was not possible with the traditional pre-design method. The results showed that the type of mixture had great influence on the number of stages and on energy consumption. A higher number of stages and a lower consumption of energy were attained with mixtures rich in the light component, while higher energy consumption occurred when the mixture was rich in the heavy component. Conclusions The proposed strategy expands the search of an optimal design of Petlyuk columns within a feasible region, which allow us to find a feasible design that meets output specifications and low thermal loads. PMID:25061476

Designing a SCADA system simulator for fast breeder reactor

NASA Astrophysics Data System (ADS)

Nugraha, E.; Abdullah, A. G.; Hakim, D. L.

2016-04-01

SCADA (Supervisory Control and Data Acquisition) system simulator is a Human Machine Interface-based software that is able to visualize the process of a plant. This study describes the results of the process of designing a SCADA system simulator that aims to facilitate the operator in monitoring, controlling, handling the alarm, accessing historical data and historical trend in Nuclear Power Plant (NPP) type Fast Breeder Reactor (FBR). This research used simulation to simulate NPP type FBR Kalpakkam in India. This simulator was developed using Wonderware Intouch software 10 and is equipped with main menu, plant overview, area graphics, control display, set point display, alarm system, real-time trending, historical trending and security system. This simulator can properly simulate the principle of energy flow and energy conversion process on NPP type FBR. This SCADA system simulator can be used as training media for NPP type FBR prospective operators.

Aircraft Survivability: Rotorcraft Survivability. Summer 2010

DTIC Science & Technology

2010-01-01

Loading of the shafts was conducted using two techniques. The first tech- nique applied a torsion load up to the design limit load after the article...show the ballistic impact and impact damage. Figure 11 shows a 45-degree shaft failure, a common failure type, when loaded to design limit after...SUMMER 2010 ROTORCRAFT Survivability STUDY ON ROTORCRAFT SURVIVABILITY V-22 INTEGRATED SURVIVABILITY DESIGN CH-53K HEAVY LIFT HELICOPTER 9 20 25

Influence of Study Design on Outcomes Following Reflexology Massage: An Integrative and Critical Review of Interventional Studies.

PubMed

McVicar, Andrew; Greenwood, Christina; Ellis, Carol; LeForis, Chantelle

2016-09-01

Interpretation of the efficacy of reflexology is hindered by inconsistent research designs and complicated by professional views that criteria of randomized controlled trials (RCTs)are not ideal to research holistic complementary and alternative medicine practice. The influence of research designs on study outcomes is not known. This integrative review sought to evaluate this possibility. Thirty-seven interventional studies (2000-2014) were identified; they had RCT or non-RCT design and compared reflexology outcomes against a control/comparison group. Viability of integrating RCT and non-RCT studies into a single database was first evaluated by appraisal of 16 reporting fields related to study setting and objectives, sample demographics, methodologic design, and treatment fidelity and assessment against Jadad score quality criteria for RCTs. For appraisal, the database was stratified into RCT/non-RCT or Jadad score of 3 or more or less than 3. Deficits in reporting were identified for blind assignment of participants, dropout/completion rate, and School of Reflexology. For comparison purposes, these fields were excluded from subsequent analysis for evidence of association between design fields and of fields with study outcomes. Thirty-one studies applied psychometric tools and 20 applied biometric tools (14 applied both). A total of 116 measures were used. Type of measure was associated with study objectives (p < 0.001; chi-square), in particular of psychometric measures with a collated "behavioral/cognitive" objective. Significant outcomes were more likely (p < 0.001; chi-square) for psychometric than for biometric measures. Neither type of outcome was associated with choice of RCT or non-RCT method, but psychometric responses were associated (p = 0.007) with a nonmassage control strategy. The review supports psychometric responses to reflexology when study design uses a nonmassage control strategy. Findings suggest that an evaluation of outcomes against sham reflexology massage and other forms of massage, as well as a narrower focus of study objective, may clarify whether there is a relationship between study design and efficacy of reflexology.

BOP2: Bayesian optimal design for phase II clinical trials with simple and complex endpoints.

PubMed

Zhou, Heng; Lee, J Jack; Yuan, Ying

2017-09-20

We propose a flexible Bayesian optimal phase II (BOP2) design that is capable of handling simple (e.g., binary) and complicated (e.g., ordinal, nested, and co-primary) endpoints under a unified framework. We use a Dirichlet-multinomial model to accommodate different types of endpoints. At each interim, the go/no-go decision is made by evaluating a set of posterior probabilities of the events of interest, which is optimized to maximize power or minimize the number of patients under the null hypothesis. Unlike other existing Bayesian designs, the BOP2 design explicitly controls the type I error rate, thereby bridging the gap between Bayesian designs and frequentist designs. In addition, the stopping boundary of the BOP2 design can be enumerated prior to the onset of the trial. These features make the BOP2 design accessible to a wide range of users and regulatory agencies and particularly easy to implement in practice. Simulation studies show that the BOP2 design has favorable operating characteristics with higher power and lower risk of incorrectly terminating the trial than some existing Bayesian phase II designs. The software to implement the BOP2 design is freely available at www.trialdesign.org. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

Asymmetrically pressing nasal splint for crooked nose deformity.

PubMed

Tugrul, Selahattin; Dogan, Remzi; Kocak, Ilker; Ozturan, Orhan

2015-01-01

Correcting crooked nose deformity is one of the most difficult procedure in rhinoplastic surgery. For that reason, the authors have been designed an asymmetrically pressing nasal splint. In this prospective study, the aim was to compare the effects of applying asymmetrically pressing nasal splint and normal symmetrically splint on the crooked nose. This study included 129 patients who were operated on for crooked nose deformity. Patients were divided into 2 groups. Normal symmetrically pressing nasal splint was applied to groups 1a (I type) and 1b (C type). Asymmetrically pressing nasal splint was applied to groups 2a (I type) and 2b (C type). All groups were compared according to deflection angle from the midline, the percentage of postoperative improvement, patient satisfaction with visual analog scale, and complication rate. I-type noses in both groups at postoperative angle values were reduced, and C-type noses in both groups at postoperative angle values were increased significantly compared with preoperative values. I-type noses of group 2 at postoperative angle values compared with group 1 were reduced, and C-type noses were increased in group 2 significantly. Patient satisfaction rate in group 2 were significantly better than in group 1. The closeness ratios to the ideal angles in group 1 were in "good" and "moderate" levels, whereas in group 2, it was in "excellent" level. There was no significant difference in complication rate in both groups. Asymmetrically pressing splint (novel design) showed increasing success rate clearly in crooked nose surgery than in normal splints.

THE TYPES OF PALAEARCTIC HIPPORHININI (Coleoptera, Curculionidae, Cyclominae) CONSERVED AT THE MUSÉUM NATIONAL D'HISTOIRE NATURELLE, PARIS.

PubMed

Meregalli, Massimo; Perrin, Hélène

2015-11-30

The Palaearctic species of Curculionidae: Cyclominae: Hipporhinini conserved at the Muséum national d'Histoire Naturelle, Paris were critically revised in order to recognise the type specimens, select lectotypes or, where necessary, designate neotypes. Out of 135 species whose types were presumably preserved in the MNHN, original type specimens of 116 could be found. The holotypes of 21 species were available, either because originally designated as such, or because the species was unequivocally based on a single specimen; a paratype of another taxon, whose holotype is preserved in another collection, was also examined. The lectotypes of 93 species were designated, and a syntype of another species was also seen. Neotypes of 10 more species were designated, thus leading to a total number of species whose type is conserved at the MNHN to 126. Type specimens of five more species described by French authors, not present in the MNHN but conserved in other museums, were found as well and were included in the paper, with the further designation of three lectotypes. All types treated herein were labelled and photographed.

Feasibility study of an Integrated Program for Aerospace-vehicle Design (IPAD) system. Volume 4: Design of the IPAD system. Part 1: IPAD system design requirements, phase 1, task 2

NASA Technical Reports Server (NTRS)

Garrocq, C. A.; Hurley, M. J.

1973-01-01

System requirements, software elements, and hardware equipment required for an IPAD system are defined. An IPAD conceptual design was evolved, a potential user survey was conducted, and work loads for various types of interactive terminals were projected. Various features of major host computing systems were compared, and target systems were selected in order to identify the various elements of software required.

Non-manipulation quantitative designs.

PubMed

Rumrill, Phillip D

2004-01-01

The article describes non-manipulation quantitative designs of two types, correlational and causal comparative studies. Both of these designs are characterized by the absence of random assignment of research participants to conditions or groups and non-manipulation of the independent variable. Without random selection or manipulation of the independent variable, no attempt is made to draw causal inferences regarding relationships between independent and dependent variables. Nonetheless, non-manipulation studies play an important role in rehabilitation research, as described in this article. Examples from the contemporary rehabilitation literature are included. Copyright 2004 IOS Press

Identifying crash contributory factors at urban roundabouts and using association rules to explore their relationships to different crash types.

PubMed

Montella, Alfonso

2011-07-01

The use of roundabouts improves intersection safety by eliminating or altering conflict types, reducing crash severity, and causing drivers to reduce speeds. However, roundabout performances can degrade if precautions are not taken during either the design or the operation phase. Therefore, additional information on the safety of the roundabouts is extremely helpful for planners and designers in identifying existing deficiencies and in refining the design criteria currently being used. The aim of the paper was to investigate the crash contributory factors in 15 urban roundabouts located in Italy and to study the interdependences between these factors. The crash data refer to the period 2003-2008. The identification of the crash contributory factors was based on site inspections and rigorous analyses performed by a team of specialists with a relevant road safety engineering background. Each roundabout was inspected once every year from 2004 to 2009, both in daytime and in nighttime. Overall, 62 different contributory factors and 2156 total contributory factors were identified. In 51 crashes, a single contributory factor was found, whereas in the other 223 crashes, a combination of contributory factors was identified. Given the large amount of data, the interdependences between the contributory factors and between the contributory factors and the different crash types were explored by an association discovery. Association discovery is the identification of sets of items (i.e., crash contributory factors and crash types in our study) that occur together in a given event (i.e., a crash in our study). The rules were filtered by support, confidence, and lift. As a result, 112 association rules were discovered. Overall, numerous contributory factors related to the road and environment deficiencies but not related to the road user or to the vehicle were identified. The most important factors related to geometric design were the radius of deflection and the deviation angle. In existing roundabouts, the improvement of these factors might be quite expensive, but the crucial role of a moderate radius of deflection and a large deviation angle in the design of new roundabouts was stressed. Many of the contributory factors were related to markings and signs, and these factors could be easily removed with low-cost safety measures. Furthermore, because of the association between the markings, signs, and geometric design contributory factors, the study results suggest that the improvement in markings and signs might also have a significant effect in the sites where geometric design deficiencies were identified as contributory factors. Copyright © 2011 Elsevier Ltd. All rights reserved.

[The mixed design in nursing sciences or when a question of research calls for qualitative and quantitative strategies].

PubMed

Bourgault, Patricia; Gallagher, Frances; Michaud, Cécile; Saint-Cyr-Tribble, Denise

2010-12-01

The use of a mixed method research design raises many questions, especially regarding the paradigmatic position. With this paradigm, we may consider the mixed method design as the best way of answering a research question and the latter orients to one of the different subtypes of mixed method design. To illustrate the use of this kind of design, we propose a study such as conducted in nursing sciences. In this article, the challenges raised by the mixed method design, and the place of this type of research in nursing sciences is discussed.

Equal-Curvature X-Ray Telescopes

NASA Technical Reports Server (NTRS)

Saha, Timo T.; Zhang, William

2002-01-01

We introduce a new type of x-ray telescope design; an Equal-Curvature telescope. We simply add a second order axial sag to the base grazing incidence cone-cone telescope. The radius of curvature of the sag terms is the same on the primary surface and on the secondary surface. The design is optimized so that the on-axis image spot at the focal plane is minimized. The on-axis RMS (root mean square) spot diameter of two studied telescopes is less than 0.2 arc-seconds. The off-axis performance is comparable to equivalent Wolter type 1 telescopes.

Design study of a kinematic Stirling engine for dispered solar electric power systems

NASA Technical Reports Server (NTRS)

1980-01-01

The concept evaluation shows that the four cylinder double acting U type Stirling engine with annular regenerators is the most suitable engine type for the 15 kW solar application with respect to design, performance and cost. Results show that near term performance for a metallic Stirling engine is 42% efficiency. Further improved components show an impact on efficiency of the future metallic engine to 45%. Increase of heater temperature, through the introduction of ceramic components, contribute the greatest amount to achieve high efficiency goals. Future ceramic Stirling engines for solar applications show an efficiency of around 50%.

Mathematical Practices in a Technological Setting: A Design Research Experiment for Teaching Circle Properties

ERIC Educational Resources Information Center

Akyuz, Didem

2016-01-01

This article documents the classroom mathematical practices observed in a collegiate level teacher education course related to the circle topic. The course, which was prepared as design research, utilized a dynamic geometry environment which influenced the type and nature of the evolved mathematical practices. The study uses emergent perspective…

Design Matters: Explorations of Content and Design in Fraction Games

ERIC Educational Resources Information Center

Gresalfi, Melissa Sommerfeld; Rittle-Johnson, Bethany; Loehr, Abbey; Nichols, Isaac

2018-01-01

The goal of the current study was to contribute to our emergent understanding of whether and how particular types of digital games can support student learning and engagement. We focused on commercially available educational apps that focused on similar content (fraction comparison and equivalence) but represented extremes in how game-like they…

Heaping-Induced Bias in Regression-Discontinuity Designs. NBER Working Paper No. 17408

ERIC Educational Resources Information Center

Barreca, Alan I.; Lindo, Jason M.; Waddell, Glen R.

2011-01-01

This study uses Monte Carlo simulations to demonstrate that regression-discontinuity designs arrive at biased estimates when attributes related to outcomes predict heaping in the running variable. After showing that our usual diagnostics are poorly suited to identifying this type of problem, we provide alternatives. We also demonstrate how the…

VISUAL AND AUDIO PRESENTATION IN MACHINE PROGRAMED INSTRUCTION. FINAL REPORT.

ERIC Educational Resources Information Center

ALLEN, WILLIAM H.

THIS STUDY WAS PART OF A LARGER RESEARCH PROGRAM AIMED TOWARD DEVELOPMENT OF PARADIGMS OF MESSAGE DESIGN. OBJECTIVES OF THREE PARALLEL EXPERIMENTS WERE TO EVALUATE INTERACTIONS OF PRESENTATION MODE, PROGRAM TYPE, AND CONTENT AS THEY AFFECT LEARNER CHARACTERISTICS. EACH EXPERIMENT USED 18 TREATMENTS IN A FACTORIAL DESIGN WITH RANDOMLY SELECTED…

Student Attitudes toward Bibliographic Instruction.

ERIC Educational Resources Information Center

Damko, Ellen E.

This study was designed to determine what value, if any, college students place upon library use instruction. A survey conducted on a random sample of college and university students working at Cedar Point Amusement Park in Sandusky, Ohio, during the summer of 1990 was designed to determine the type and amount of library instruction each student…

The Impact of Non-Conscious Knowledge on Educational Technology Research and Design

ERIC Educational Resources Information Center

Clark, Richard E.

2011-01-01

There are at least three powerful insights for educational technology researchers and designers from recent neuroscience studies of the brain and from cognitive science research findings: First, our brains learn and process two very different types of knowledge; non-conscious, automated, procedural, or implicit knowledge, and conscious,…

MALL in the Wild: Learners' Designs for Scaffolding Vocabulary Learning Trajectories

ERIC Educational Resources Information Center

Underwood, Joshua; Luckin, Rosemary; Winters, Niall

2014-01-01

This study aims to inform the design of mobile apps for vocabulary learning. Learning vocabulary involves developing, connecting, and sustaining various types of knowledge and skills. Learners do not typically acquire these all at once, but rather over the course of distinct episodes of activity. Yet, little is known about learning experience…

PLANNING STUDY--BEHAVIORAL FACTORS IN DENTAL SCHOOL DESIGN. SUMMARY PROGRESS REPORT.

ERIC Educational Resources Information Center

MYRICK, RICHARD

THIS REPORT DISCUSSES ENVIRONMENTAL CONSIDERATIONS IN THE DESIGN OF DENTAL SCHOOL FACILITIES AS RELATED TO THE EDUCATIONAL NEEDS OF STUDENTS AND FACULTY. TWO TYPES OF NEEDS ARE IDENTIFIED--(1) PHYSICAL, INCLUDING A FUNCTIONAL ANALYSIS OF THE PHYSICAL NEEDS IMPOSED BY THE TASKS TO BE DONE, AND (2) PSYCHOLOGICAL, INCLUDING MOTIVATIONAL, SOCIAL, AND…

78 FR 44588 - Experimental Removal of Barred Owls To Benefit Threatened Northern Spotted Owls; Final...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-24

... experimental design, duration of the study, and the method of barred owl removal. Background The Service listed... and nonlethal), and the type of experimental design (demography vs. occupancy). All action...-FF01E00000] Experimental Removal of Barred Owls To Benefit Threatened Northern Spotted Owls; Final...

Creativity in Advertising Design Education: An Experimental Study

ERIC Educational Resources Information Center

Cheung, Ming

2011-01-01

Have you ever thought about why qualities whose definitions are elusive, such as those of a sunset or a half-opened rose, affect us so powerfully? According to de Saussure (Course in general linguistics, 1983), the making of meanings is closely related to the production and interpretation of signs. All types of design, including advertising…

Earth Observatory Satellite system definition study. Report no. 5: System design and specifications. Part 2: Ground system element specifications

NASA Technical Reports Server (NTRS)

1974-01-01

The Ground System requirements for the Land Resources Management (LRM) type-A and type-B missions of the Earth Observatory Satellite (EOS) program are presented. Specifications for the Thematic Mapper data processing are provided (LRM A mission). The specifications also cover the R and D instruments (Thematic Mapper and High Resolution Pointable Imager) data processing for the LRM type-B mission.

Evaluation and improvement of micro-surfacing mix design method and modelling of asphalt emulsion mastic in terms of filler-emulsion interaction

NASA Astrophysics Data System (ADS)

Robati, Masoud

This Doctorate program focuses on the evaluation and improving the rutting resistance of micro-surfacing mixtures. There are many research problems related to the rutting resistance of micro-surfacing mixtures that still require further research to be solved. The main objective of this Ph.D. program is to experimentally and analytically study and improve rutting resistance of micro-surfacing mixtures. During this Ph.D. program major aspects related to the rutting resistance of micro-surfacing mixtures are investigated and presented as follow: 1) evaluation of a modification of current micro-surfacing mix design procedures: On the basis of this effort, a new mix design procedure is proposed for type III micro-surfacing mixtures as rut-fill materials on the road surface. Unlike the current mix design guidelines and specification, the new mix design is capable of selecting the optimum mix proportions for micro-surfacing mixtures; 2) evaluation of test methods and selection of aggregate grading for type III application of micro-surfacing: Within the term of this study, a new specification for selection of aggregate grading for type III application of micro-surfacing is proposed; 3) evaluation of repeatability and reproducibility of micro-surfacing mixture design tests: In this study, limits for repeatability and reproducibility of micro-surfacing mix design tests are presented; 4) a new conceptual model for filler stiffening effect on asphalt mastic of micro-surfacing: A new model is proposed, which is able to establish limits for minimum and maximum filler concentrations in the micro-surfacing mixture base on only the filler important physical and chemical properties; 5) incorporation of reclaimed asphalt pavement and post-fabrication asphalt shingles in micro-surfacing mixture: The effectiveness of newly developed mix design procedure for micro-surfacing mixtures is further validated using recycled materials. The results present the limits for the use of RAP and RAS amount in micro-surfacing mixtures; 6) new colored micro-surfacing formulations with improved durability and performance: The significant improvement of around 45% in rutting resistance of colored and conventional micro-surfacing mixtures is achieved through employing low penetration grade bitumen polymer modified asphalt emulsion stabilized using nanoparticles.

Continuous coaxial cable sensors for monitoring of RC structures with electrical time domain reflectometry

NASA Astrophysics Data System (ADS)

Chen, Genda; Mu, Huimin; Pommerenke, David; Drewniak, James L.

2003-08-01

This study was aimed at developing and validating a new type of coaxial cable sensors that can be used to detect cracks or measure strains in reinforced concrete (RC) structures. The new sensors were designed based on the change in outer conductor configuration under strain effects in contrast to the geometry-based design in conventional coaxial cable sensors. Both numerical simulations and calibration tests with strain gauges of a specific design of the proposed cables were conducted to study the cables' sensitivity. Four designs of the proposed type of sensors were then respectively mounted near the surface of six 3-foot-long RC beams. They were tested in bending to further validate the cables' sensitivity in concrete members. The calibration test results generally agree with the numerical simulations. They showed that the proposed sensors are over 10~50 times more sensitive than conventional cable sensors. The test results of the beams not only validate the sensitivity of the new sensors but also indicate a good correlation with the measured crack width.

Lithium D-cell study

NASA Technical Reports Server (NTRS)

Size, P.; Takeuchi, Esther S.

1993-01-01

The purpose of this contract is to evaluate parametrically the effects of various factors including the electrolyte type, electrolyte concentration, depolarizer type, and cell configuration on lithium cell electrical performance and safety. This effort shall allow for the selection and optimization of cell design for future NASA applications while maintaining close ties with WGL's continuous improvements in manufacturing processes and lithium cell design. Taguchi experimental design techniques are employed in this task, and allow for a maximum amount of information to be obtained while requiring significantly less cells than if a full factorial design were employed. Acceptance testing for this task is modeled after the NASA Document EP5-83-025, Revision C, for cell weights, OCV's and load voltages. The performance attributes that are studied in this effort are fresh capacity and start-up characteristics evaluated at two rates and two temperatures, shelf-life characteristics including start-up and capacity retention, and iterative microcalorimetry measurements. Abuse testing includes forced over discharge at two rates with and without diode protection, temperature tolerance testing, and shorting tests at three rates with the measurement of heat generated during shorting conditions.

Stream channel responses and soil loss at off-highway vehicle stream crossings in the Ouachita National Forest

Treesearch

Daniel A. Marion; Jonathan D. Phillips; Chad Yocum; Stephanie H. Mehlhope

2014-01-01

This study investigates the geomorphic effects of ford-type stream crossings in an off-highway vehicle (OHV) trail complex in the Ouachita National Forest, Arkansas. At a total of 15 crossing sites, we used a disturbed vs. undisturbed study design to assess soil truncation and an upstream vs. downstream design to assess in-channel effects. The 15 sites ranged from OHV...

Redesigning the type II' β-turn in green fluorescent protein to type I': implications for folding kinetics and stability.

PubMed

Madan, Bharat; Sokalingam, Sriram; Raghunathan, Govindan; Lee, Sun-Gu

2014-10-01

Both Type I' and Type II' β-turns have the same sense of the β-turn twist that is compatible with the β-sheet twist. They occur predominantly in two residue β-hairpins, but the occurrence of Type I' β-turns is two times higher than Type II' β-turns. This suggests that Type I' β-turns may be more stable than Type II' β-turns, and Type I' β-turn sequence and structure can be more favorable for protein folding than Type II' β-turns. Here, we redesigned the native Type II' β-turn in GFP to Type I' β-turn, and investigated its effect on protein folding and stability. The Type I' β-turns were designed based on the statistical analysis of residues in natural Type I' β-turns. The substitution of the native "GD" sequence of i+1 and i+2 residues with Type I' preferred "(N/D)G" sequence motif increased the folding rate by 50% and slightly improved the thermodynamic stability. Despite the enhancement of in vitro refolding kinetics and stability of the redesigned mutants, they showed poor soluble expression level compared to wild type. To overcome this problem, i and i + 3 residues of the designed Type I' β-turn were further engineered. The mutation of Thr to Lys at i + 3 could restore the in vivo soluble expression of the Type I' mutant. This study indicates that Type II' β-turns in natural β-hairpins can be further optimized by converting the sequence to Type I'. © 2014 Wiley Periodicals, Inc.

75 FR 22707 - United States Standards for Grades of Potatoes

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-30

... characteristic requirement to allow mixed colors and/or types of potatoes when designated as a mixed or specialty... inserting language into the standard to allow mixed colors and/or types of potatoes when designated as a... proposed standard to allow for mixed colors and/or types of potatoes when designated as a mixed or...

14 CFR 25.3 - Special provisions for ETOPS type design approvals.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 180 minutes, an applicant must comply with § 25.1535, except that it need not comply with the... ETOPS type design approval of an airplane beyond 180 minutes an applicant must comply with § 25.1535. (c) Airplanes with more than two engines. An applicant for ETOPS type design approval must comply with § 25.1535...

14 CFR 25.3 - Special provisions for ETOPS type design approvals.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 180 minutes, an applicant must comply with § 25.1535, except that it need not comply with the... ETOPS type design approval of an airplane beyond 180 minutes an applicant must comply with § 25.1535. (c) Airplanes with more than two engines. An applicant for ETOPS type design approval must comply with § 25.1535...

14 CFR 25.3 - Special provisions for ETOPS type design approvals.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 180 minutes, an applicant must comply with § 25.1535, except that it need not comply with the... ETOPS type design approval of an airplane beyond 180 minutes an applicant must comply with § 25.1535. (c) Airplanes with more than two engines. An applicant for ETOPS type design approval must comply with § 25.1535...

14 CFR 25.3 - Special provisions for ETOPS type design approvals.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 180 minutes, an applicant must comply with § 25.1535, except that it need not comply with the... ETOPS type design approval of an airplane beyond 180 minutes an applicant must comply with § 25.1535. (c) Airplanes with more than two engines. An applicant for ETOPS type design approval must comply with § 25.1535...

14 CFR 25.3 - Special provisions for ETOPS type design approvals.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 180 minutes, an applicant must comply with § 25.1535, except that it need not comply with the... ETOPS type design approval of an airplane beyond 180 minutes an applicant must comply with § 25.1535. (c) Airplanes with more than two engines. An applicant for ETOPS type design approval must comply with § 25.1535...

49 CFR 173.466 - Additional tests for Type A packagings designed for liquids and gases.

Code of Federal Regulations, 2010 CFR

2010-10-01

... for liquids and gases. 173.466 Section 173.466 Transportation Other Regulations Relating to...) Materials § 173.466 Additional tests for Type A packagings designed for liquids and gases. (a) In addition to the tests prescribed in § 173.465, Type A packagings designed for liquids and gases must be...

49 CFR 173.466 - Additional tests for Type A packagings designed for liquids and gases.

Code of Federal Regulations, 2011 CFR

2011-10-01

... for liquids and gases. 173.466 Section 173.466 Transportation Other Regulations Relating to...) Materials § 173.466 Additional tests for Type A packagings designed for liquids and gases. (a) In addition to the tests prescribed in § 173.465, Type A packagings designed for liquids and gases must be...

49 CFR 173.466 - Additional tests for Type A packagings designed for liquids and gases.

Code of Federal Regulations, 2012 CFR

2012-10-01

... for liquids and gases. 173.466 Section 173.466 Transportation Other Regulations Relating to...) Materials § 173.466 Additional tests for Type A packagings designed for liquids and gases. (a) In addition to the tests prescribed in § 173.465, Type A packagings designed for liquids and gases must be...

49 CFR 173.466 - Additional tests for Type A packagings designed for liquids and gases.

Code of Federal Regulations, 2013 CFR

2013-10-01

... for liquids and gases. 173.466 Section 173.466 Transportation Other Regulations Relating to...) Materials § 173.466 Additional tests for Type A packagings designed for liquids and gases. (a) In addition to the tests prescribed in § 173.465, Type A packagings designed for liquids and gases must be...

49 CFR 173.466 - Additional tests for Type A packagings designed for liquids and gases.

Code of Federal Regulations, 2014 CFR

2014-10-01

... for liquids and gases. 173.466 Section 173.466 Transportation Other Regulations Relating to...) Materials § 173.466 Additional tests for Type A packagings designed for liquids and gases. (a) In addition to the tests prescribed in § 173.465, Type A packagings designed for liquids and gases must be...

Attitude translation coupling in a rotating drag-free satellite

NASA Technical Reports Server (NTRS)

Sanz Fernandez De Cordova, S.; Debra, D. B.

1975-01-01

The translational and attitude control of a drag-free, rotating satellite are usually designed to be independent of each other. However, coupling may exist which can produce instability. The different types of coupling and the stability conditions are studied, using root locus type techniques. The resulting root loci have unusual shapes due to the nonlinearity of the characteristic polynomial in terms of the coupling parameters. It is possible, however, to use standard root loci techniques by appropriate factoring and subsequent superposition of loci. The effect of the main parameters upon the overall stability of the system is studied. Both, attitude and translation instabilities eventually arise - the former being more critical for typical satellite designs. An analytical expression for the stability boundary is developed.

Guidance for conducting hazardous materials flow surveys

DOT National Transportation Integrated Search

1995-01-01

This report provides guidance on how to conduct a commodity flow study for hazardous materials moving by highway. It discusses the need for this type of study and details how to review baseline information and design the study. It includes examples a...

Type, Graphics for Effective Communication, Not Mere Ornamentation

ERIC Educational Resources Information Center

Day, Carla

1978-01-01

Examines the use of typography to aid in the total communicative message of student publications; discusses the design possibilities of type, the use of headlines as a design element, and type classification. (GW)

The role of usability in the evaluation of accidents: human error or design flaw?

PubMed

Correia, Walter; Soares, Marcelo; Barros, Marina; Campos, Fábio

2012-01-01

This article aims to highlight the role of consumer products companies in the heart and the extent of accidents involving these types of products, and as such undesired events take part as an agent in influencing decision making for the purchase of a product that nature on the part of consumers and users. The article demonstrates, by reference, interviews and case studies such as the development of poorly designed products and design errors of design can influence the usage behavior of users, thus leading to accidents, and also negatively affect the next image of a company. The full explanation of these types of questions aims to raise awareness, plan on a reliable usability, users and consumers in general about the safe use of consumer products, and also safeguard their rights before a legal system of consumer protection, even far away by the CDC--Code of Consumer Protection.

An approximate solution to improve computational efficiency of impedance-type payload load prediction

NASA Technical Reports Server (NTRS)

White, C. W.

1981-01-01

The computational efficiency of the impedance type loads prediction method was studied. Three goals were addressed: devise a method to make the impedance method operate more efficiently in the computer; assess the accuracy and convenience of the method for determining the effect of design changes; and investigate the use of the method to identify design changes for reduction of payload loads. The method is suitable for calculation of dynamic response in either the frequency or time domain. It is concluded that: the choice of an orthogonal coordinate system will allow the impedance method to operate more efficiently in the computer; the approximate mode impedance technique is adequate for determining the effect of design changes, and is applicable for both statically determinate and statically indeterminate payload attachments; and beneficial design changes to reduce payload loads can be identified by the combined application of impedance techniques and energy distribution review techniques.

An Algorithm for Integrated Subsystem Embodiment and System Synthesis

NASA Technical Reports Server (NTRS)

Lewis, Kemper

1997-01-01

Consider the statement,'A system has two coupled subsystems, one of which dominates the design process. Each subsystem consists of discrete and continuous variables, and is solved using sequential analysis and solution.' To address this type of statement in the design of complex systems, three steps are required, namely, the embodiment of the statement in terms of entities on a computer, the mathematical formulation of subsystem models, and the resulting solution and system synthesis. In complex system decomposition, the subsystems are not isolated, self-supporting entities. Information such as constraints, goals, and design variables may be shared between entities. But many times in engineering problems, full communication and cooperation does not exist, information is incomplete, or one subsystem may dominate the design. Additionally, these engineering problems give rise to mathematical models involving nonlinear functions of both discrete and continuous design variables. In this dissertation an algorithm is developed to handle these types of scenarios for the domain-independent integration of subsystem embodiment, coordination, and system synthesis using constructs from Decision-Based Design, Game Theory, and Multidisciplinary Design Optimization. Implementation of the concept in this dissertation involves testing of the hypotheses using example problems and a motivating case study involving the design of a subsonic passenger aircraft.

Association of type 1 diabetes and concentrations of drinking water components in Newfoundland and Labrador, Canada

PubMed Central

Chafe, Roger; Aslanov, Rana; Sarkar, Atanu; Gregory, Peter; Comeau, Alex; Newhook, Leigh Anne

2018-01-01

Objective To determine the association between drinking water quality and rates of type 1 diabetes in the Newfoundland and Labrador (NL) population, which has one of the highest incidences of type 1 diabetes reported globally. Research design and methods The study used a community-based, case-control design. We first calculated incidence rates of type 1 diabetes at the provincial, regional and community levels. The connection between incidence rates and components in public water supplies were then analyzed in three ways: to evaluate differences in water quality between communities with and without incident cases of type 1 diabetes, and to analyze the relationship between water quality and incidence rates of type 1 diabetes at both the community and regional levels. Results The provincial incidence of type 1 diabetes was 51.7/100 000 (0-14 year age group) for the period studied. In the community-based analysis, there were significant associations found between higher concentrations of arsenic (β=0.268, P=0.013) and fluoride (β=0.202, P=0.005) in drinking water and higher incidence of type 1 diabetes. In the regional analysis, barium (β=−0.478, P=0.009) and nickel (β=−0.354, P=0.050) concentrations were negatively associated with incidence of type 1 diabetes. Conclusions We confirmed the high incidence of type 1 diabetes in NL. We also found that concentrations of some components in drinking water were associated with higher incidence of type 1 diabetes, but no component was found to have a significant association across the three different levels of analysis performed. PMID:29527309

Web-Based Remote Monitoring Systems for Self-Managing Type 2 Diabetes: A Systematic Review.

PubMed

Mushcab, Hayat; Kernohan, W George; Wallace, Jonathan; Martin, Suzanne

2015-07-01

This systematic review aims to evaluate evidence for viability and impact of Web-based telemonitoring for managing type 2 diabetes mellitus. A review protocol included searching Medline, EMBASE, CINAHL, AMED, the Cochrane Library, and PubMed using the following terms: telemonitoring, type 2 diabetes mellitus, self-management, and web-based Internet solutions. The technology used, trial design, quality of life measures, and the glycated hemoglobin (HbA1c) levels were extracted. This review identified 426 publications; of these, 19 met preset inclusion criteria. Ten quasi-experimental research designs were found, of which seven were pre-posttest studies, two were cohort studies, and one was an interrupted time-series study; in addition, there were nine randomized controlled trials. Web-based remote monitoring from home to hospital is a viable approach for healthcare delivery and enhances patients' quality of life. Six of these studies were conducted in South Korea, five in the United States, three in the United Kingdom, two in Taiwan, and one each in Spain, Poland, and India. The duration of the studies varied from 4 weeks to 18 months, and the participants were all adults. Fifteen studies showed positive improvement in HbA1c levels. One study showed high acceptance of the technology among participants. It remains challenging to identify clear evidence of effectiveness in the rapidly changing area of remote monitoring in diabetes care. Both the technology and its implementations are complex. The optimal design of a telemedicine system is still uncertain, and the value of the real-time blood glucose transmissions is still controversial.

The application of multilobed flap designs for anatomic and functional oropharyngeal reconstructions.

PubMed

Choi, Jong Woo; Lee, Min Young; Oh, Tae Suk

2013-11-01

The oropharynx has a variety of functions, such as mastication, deglutition, articulation, taste, and airway protection. Because of its many roles, recent goals in head and neck reconstruction have focused on anatomic and functional reconstructions to minimize functional deficits. Since chemoradiation has earned a good reputation in the management of head and neck cancer, the manifestation of oropharyngeal defects has changed. Although we could not control the anatomic defects that were known to be related to the oropharyngeal functions, we hypothesized that optimizing the flap designs would be helpful for minimizing the functional deficits.Two hundred fifty cases of the head and neck reconstruction using free flaps were carried out between March 2006 and December 2010, where modified flap designs were applied. Among these, 37 tongue and 15 tonsillar reconstructions were analyzed for functional outcomes. The patients were of Asian ethnic background, and the average age was 52 years, including 38 males and 17 females. The average follow-up period was 20.5 months. Based on previous studies, the flap designs were categorized into type I, unilobe; type II, bilobe; type III, trilobe; type IV, quadrilobe; type V, additional lobe for lateral and posterior pharyngeal wall; and type VI, additional lobe for tongue base. The functional outcomes of both tongue and tonsillar reconstructions were investigated.To quantify the outcome in terms of swallowing and pronunciation, we analyzed the patients' function based on the 7-scale parameter. In terms of swallowing, the tongue reconstruction group scored 5.70 on average, whereas the tonsillar reconstruction group showed an average score of 4.53. With regard to speech intelligibility, the tongue reconstruction group revealed an average score of 5.67, whereas the tonsillar reconstruction group scored 5.46 on average.Our findings indicate that specification of the flap designs is helpful for minimizing the functional deficits in head and neck reconstructions.

Comprehensive Design Reliability Activities for Aerospace Propulsion Systems

NASA Technical Reports Server (NTRS)

Christenson, R. L.; Whitley, M. R.; Knight, K. C.

2000-01-01

This technical publication describes the methodology, model, software tool, input data, and analysis result that support aerospace design reliability studies. The focus of these activities is on propulsion systems mechanical design reliability. The goal of these activities is to support design from a reliability perspective. Paralleling performance analyses in schedule and method, this requires the proper use of metrics in a validated reliability model useful for design, sensitivity, and trade studies. Design reliability analysis in this view is one of several critical design functions. A design reliability method is detailed and two example analyses are provided-one qualitative and the other quantitative. The use of aerospace and commercial data sources for quantification is discussed and sources listed. A tool that was developed to support both types of analyses is presented. Finally, special topics discussed include the development of design criteria, issues of reliability quantification, quality control, and reliability verification.

Type 2 diabetes mellitus is associated with increased risk of pancreatic cancer: A veteran administration registry study.

PubMed

Makhoul, Issam; Yacoub, Abdulraheem; Siegel, Eric

2016-01-01

The etiology of pancreatic cancer remains elusive. Several studies have suggested a role for diabetes mellitus, but the magnitude of its contribution remains controversial. Utilizing a large administrative database, this retrospective cohort study was designed to investigate the relationship between type 2 diabetes mellitus and pancreatic cancer. Using the Veterans Integrated Services Network 16 database, 322,614 subjects were enrolled in the study, including 110,919 with type 2 diabetes mellitus and 211,695 diabetes-free controls matched by gender, year of birth and healthcare facility. A significantly higher incidence of pancreatic cancer was observed in patients with type 2 diabetes mellitus, with an adjusted hazard ratio (95% confidence interval) of 2.17 (1.70-2.77) for type 2 diabetes mellitus compared to controls (p < 10 -9 ) after controlling for the matching factors. The association between type 2 diabetes mellitus and pancreatic cancer was statistically significant and may, in part, explain the rising incidence of pancreatic cancer.

Evidence-based decision-making in infectious diseases epidemiology, prevention and control: matching research questions to study designs and quality appraisal tools

PubMed Central

2014-01-01

Background The Project on a Framework for Rating Evidence in Public Health (PRECEPT) was initiated and is being funded by the European Centre for Disease Prevention and Control (ECDC) to define a methodology for evaluating and grading evidence and strength of recommendations in the field of public health, with emphasis on infectious disease epidemiology, prevention and control. One of the first steps was to review existing quality appraisal tools (QATs) for individual research studies of various designs relevant to this area, using a question-based approach. Methods Through team discussions and expert consultations, we identified 20 relevant types of public health questions, which were grouped into six domains, i.e. characteristics of the pathogen, burden of disease, diagnosis, risk factors, intervention, and implementation of intervention. Previously published systematic reviews were used and supplemented by expert consultation to identify suitable QATs. Finally, a matrix was constructed for matching questions to study designs suitable to address them and respective QATs. Key features of each of the included QATs were then analyzed, in particular in respect to its intended use, types of questions and answers, presence/absence of a quality score, and if a validation was performed. Results In total we identified 21 QATs and 26 study designs, and matched them. Four QATs were suitable for experimental quantitative study designs, eleven for observational quantitative studies, two for qualitative studies, three for economic studies, one for diagnostic test accuracy studies, and one for animal studies. Included QATs consisted of six to 28 items. Six of the QATs had a summary quality score. Fourteen QATs had undergone at least one validation procedure. Conclusions The results of this methodological study can be used as an inventory of potentially relevant questions, appropriate study designs and QATs for researchers and authorities engaged with evidence-based decision-making in infectious disease epidemiology, prevention and control. PMID:24886571

Evidence-based decision-making in infectious diseases epidemiology, prevention and control: matching research questions to study designs and quality appraisal tools.

PubMed

Harder, Thomas; Takla, Anja; Rehfuess, Eva; Sánchez-Vivar, Alex; Matysiak-Klose, Dorothea; Eckmanns, Tim; Krause, Gérard; de Carvalho Gomes, Helena; Jansen, Andreas; Ellis, Simon; Forland, Frode; James, Roberta; Meerpohl, Joerg J; Morgan, Antony; Schünemann, Holger; Zuiderent-Jerak, Teun; Wichmann, Ole

2014-05-21

The Project on a Framework for Rating Evidence in Public Health (PRECEPT) was initiated and is being funded by the European Centre for Disease Prevention and Control (ECDC) to define a methodology for evaluating and grading evidence and strength of recommendations in the field of public health, with emphasis on infectious disease epidemiology, prevention and control. One of the first steps was to review existing quality appraisal tools (QATs) for individual research studies of various designs relevant to this area, using a question-based approach. Through team discussions and expert consultations, we identified 20 relevant types of public health questions, which were grouped into six domains, i.e. characteristics of the pathogen, burden of disease, diagnosis, risk factors, intervention, and implementation of intervention. Previously published systematic reviews were used and supplemented by expert consultation to identify suitable QATs. Finally, a matrix was constructed for matching questions to study designs suitable to address them and respective QATs. Key features of each of the included QATs were then analyzed, in particular in respect to its intended use, types of questions and answers, presence/absence of a quality score, and if a validation was performed. In total we identified 21 QATs and 26 study designs, and matched them. Four QATs were suitable for experimental quantitative study designs, eleven for observational quantitative studies, two for qualitative studies, three for economic studies, one for diagnostic test accuracy studies, and one for animal studies. Included QATs consisted of six to 28 items. Six of the QATs had a summary quality score. Fourteen QATs had undergone at least one validation procedure. The results of this methodological study can be used as an inventory of potentially relevant questions, appropriate study designs and QATs for researchers and authorities engaged with evidence-based decision-making in infectious disease epidemiology, prevention and control.

A comparison study of different RF shields for an 8-element transceive small animal array at 9.4T.

PubMed

Jin, Jin; Li, Yu; Liu, Feng; Weber, Ewald; Crozier, Stuart

2011-01-01

In this study, three types of radio-frequency shields are studied and compared in the context of ultra-high field small-animal magnetic resonance imaging. It has been demonstrated that the coil penetration depth and mutual coupling between the coils depend heavily on the type of shield employed. The results were used to guide the design of a 9.4T 8-element transceive small animal array, which provides high overall coil penetration.

Mixed response and time-to-event endpoints for multistage single-arm phase II design.

PubMed

Lai, Xin; Zee, Benny Chung-Ying

2015-06-04

The objective of phase II cancer clinical trials is to determine if a treatment has sufficient activity to warrant further study. The efficiency of a conventional phase II trial design has been the object of considerable debate, particularly when the study regimen is characteristically cytostatic. At the time of development of a phase II cancer trial, we accumulated clinical experience regarding the time to progression (TTP) for similar classes of drugs and for standard therapy. By considering the time to event (TTE) in addition to the tumor response endpoint, a mixed-endpoint phase II design may increase the efficiency and ability of selecting promising cytotoxic and cytostatic agents for further development. We proposed a single-arm phase II trial design by extending the Zee multinomial method to fully use mixed endpoints with tumor response and the TTE. In this design, the dependence between the probability of response and the TTE outcome is modeled through a Gaussian copula. Given the type I and type II errors and the hypothesis as defined by the response rate (RR) and median TTE, such as median TTP, the decision rules for a two-stage phase II trial design can be generated. We demonstrated through simulation that the proposed design has a smaller expected sample size and higher early stopping probability under the null hypothesis than designs based on a single-response endpoint or a single TTE endpoint. The proposed design is more efficient for screening new cytotoxic or cytostatic agents and less likely to miss an effective agent than the alternative single-arm design.

Comparison of repaglinide and metformin versus metformin alone for type 2 diabetes: a meta-analysis of randomized controlled trials.

PubMed

Yin, Jinjin; Deng, Houliang; Qin, Shumin; Tang, Waijiao; Zeng, Lu; Zhou, Benjie

2014-09-01

We conducted a meta-analysis to compare the efficacy and safety of repaglinide plus metformin with metformin alone on type 2 diabetes. Twenty-two studies were included in this meta-analysis. Results showed combination therapy was safe and could gain better outcomes in glycemic control. Well-designed studies are required to confirm this conclusion. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Stimulated Brillouin scattering materials, experimental design and applications: A review

NASA Astrophysics Data System (ADS)

Bai, Zhenxu; Yuan, Hang; Liu, Zhaohong; Xu, Pengbai; Gao, Qilin; Williams, Robert J.; Kitzler, Ondrej; Mildren, Richard P.; Wang, Yulei; Lu, Zhiwei

2018-01-01

Stimulated Brillouin scattering (SBS), as one type of third-order nonlinear optics effect, is extensively exploited and rapidly developed in the field of lasers and optoelectronics. A large number of theoretical and experimental studies on SBS have been carried out in the past decades. Especially, the exploration of new SBS materials and new types of SBS modulation methods have been engaged simultaneously, as the properties of different materials have great influence on the SBS performance such as generation threshold, Brillouin amplification efficiency, frequency shift, breakdown threshold, etc. This article provides a comprehensive review of the characteristics of different types of SBS materials, SBS applications, experimental design methods, as well as the parameter optimization method, which is expected to provide reference and guidance to SBS related experiments.

Activating schoolyards: study design of a quasi-experimental schoolyard intervention study.

PubMed

Andersen, Henriette Bondo; Pawlowski, Charlotte Skau; Scheller, Hanne Bebendorf; Troelsen, Jens; Toftager, Mette; Schipperijn, Jasper

2015-05-31

The aim of the Activating Schoolyards Study is to develop, implement, document and assess a comprehensive schoolyard intervention to promote physical activity (PA) during school recess for primary school children (grade 4-8). The intervention is designed to implement organizational and structural changes in the physical environment. The study builds on a quasi-experimental study design using a mixed method approach including: 1) an exploratory study aimed at providing input for the developing process; 2) an evaluation of the effect of the interventions using a combination of accelerometer, GPS and GIS; 3) a process evaluation facilitating the intervention development process and identifying barriers and facilitators in the implementation process; 4) a post-intervention end-user evaluation aimed at exploring who uses the schoolyards and how the schoolyards are used. The seven project schools (cases) were selected by means of an open competition and the interventions were developed using a participatory bottom-up approach. The participatory approach and case selection strategy make the study design novel. The use of a mixed methods design including qualitative as well as quantitative methods can be seen as a strength, as the different types of data complement each other and results of one part of the study informed the following parts. A unique aspect of our study is the use of accelerometers in combination with GPS and GIS in the effect evaluation to objectively determine where and how active the students are in the schoolyard, before and after the intervention. This provides a type of data that, to our knowledge, has not been used before in schoolyard interventions. Exploring the change in behavior in relation to specific intervention elements in the schoolyard will lead to recommendations for schools undergoing schoolyard renovations at some point in the future.

Further observations on soil freezing in the Pacific Northwest.

Treesearch

Charles E. Hale

1951-01-01

Frost observations during the winter and spring of 1949-1950 indicated that pronounced soil freezing conditions existed in the ponderosa pine, lodgepole pine, grass and brush types in eastern Oregon and Washington. Accordingly, a study was designed to determine the occurrence and character of frost under these widespread forest and range types. This paper presents a...

Concept-Guided Development of ICT Use in "Traditional" and "Innovative" Primary Schools: What Types of ICT Use Do Schools Develop?

ERIC Educational Resources Information Center

de Koster, S.; Kuiper, E.; Volman, M.

2012-01-01

The fit between existing educational practices and promoted classroom use of information and communication technologies is increasingly recognized as a factor in successful integration of such technologies in classroom practice. Using a descriptive multiple-case study design, we characterize the types of information and communication technology…

Structural Studies on Intact Clostridium botulinum Neurotoxins Complexed with Inhibitors Leading to Drug Design

DTIC Science & Technology

2007-02-01

699. 5. Hanson, M. A., and Stevens, R. C. (2000) Cocrystal structure of synaptobrevin-ll bound to botulinum neurotoxin type B at 2.0 A resolution...R. C. (2000). Cocrystal structure of synaptobrevin-II bound to botulinum neurotoxin type B at 2.0 A resolution. Nature Struct. Biol. 7, 687–692. 23

How Prevention Curricula are Taught under Real-World Conditions: Types of and Reasons for Teacher Curriculum Adaptations

ERIC Educational Resources Information Center

Miller-Day, Michelle; Pettigrew, Jonathan; Hecht, Michael L.; Shin, YoungJu; Graham, John; Krieger, Janice

2013-01-01

Purpose: As interventions are disseminated widely, issues of fidelity and adaptation become increasingly critical to understand. This study aims to describe the types of adaptations made by teachers delivering a school-based substance use prevention curriculum and their reasons for adapting program content. Design/methodology/approach: To…

Sex Typing of Jobs in Hiring: Evidence from Japan

ERIC Educational Resources Information Center

Mun, Eunmi

2010-01-01

Using unique data on employers' pre-hire preferences, this article examines the effect of sex typing on the gender gap in offered wages and training. Previous studies using post-hire data have not been able to focus directly on the effects of employer behavior, distinct from employee preferences. By analyzing gender-designated job requisitions for…

Learning Online: A Comparison of Different Media Types

ERIC Educational Resources Information Center

Kößler, Franziska J.; Nitzschner, Marco M.

2015-01-01

Based on research about humor, foreign languages, and instructional design, in the current study we examined whether successful learning is related to using different types of media. We compared the comprehension of an economic concept in novices (N = 82) under three conditions: a Wikipedia article, a funny, and a serious YouTube video. The media…

Teachers' Perceptions about the Types, Quality, and Impact of Their Job-Embedded Professional Development Experiences

ERIC Educational Resources Information Center

Mitchell, Delilah

2013-01-01

This study was designed to determine eighth grade teachers' perceptions of the impact, quality, and types of job-embedded professional development activities they have participated in and the relationship to student achievement in language arts, math, or science. The researcher identified school districts with 50% or more of their eighth grade…

Evaluating Effectiveness of Two Types of Chinese Remedial Materials for Low-Achieving and Disadvantaged Second Graders

ERIC Educational Resources Information Center

Chen, Shu-Li; Shih-Jay, Tzeng; Chu, Szu-Yin

2015-01-01

Having access to research-based materials is an essential component for designing effective interventions for low-achieving and disadvantaged students. The purpose of this study was to compare the effectiveness of two types of reading material intervention for low-achieving and disadvantaged students. The students were divided into experimental…

A variety of variables.

PubMed

Jupiter, Daniel C

2014-01-01

In designing studies and developing plans for analyses, we must consider which tests are appropriate for the types of variables we are using. Here I describe the types of variables available to us, and I briefly consider the appropriate tools to use in their analysis. Copyright © 2014 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

Separate physiological roles for two isozymes of pyridine nucleotide-linked glycerol-3-phosphate dehydrogenase in chicken.

NASA Technical Reports Server (NTRS)

White, H. B., III; Kaplan, N. O.

1972-01-01

The isozymes considered are designated 'liver type' and 'muscle type' based on the tissue of highest concentration. Electrophoretic analysis shows that the liver type is found in small amounts or is undetectable in all tissues studied except liver. The muscle type is found in skeletal muscles and kidney. Presumptive hybrid enzymes occur at low levels in chicken liver and kidney. The tissue distribution of glyceron-3-P dehydrogenase in several birds capable of sustained flight is different than in chicken.

Application of type synthesis theory to the redesign of a complex surgical instrument.

PubMed

Lim, Jonas J B; Erdman, Arthur G

2002-06-01

Surgical instruments consist of basic mechanical components such as gears, links, pivots, sliders, etc., which are common in mechanical design. This paper describes the application of a method in the analysis and design of complex surgical instruments such as those employed in laparoscopic surgery. This is believed to be the first application of type synthesis theory to a complex medical instrument. Type synthesis is a methodology that can be applied during the conceptual phase of mechanical design. A handle assembly from a patented laparoscopic surgical stapler is used to illustrate the application of the design method developed. Type synthesis is applied on specific subsystems of the mechanism within the handle assembly where alternative design concepts are generated. Chosen concepts are then combined to form a new conceptual design for the handle assembly. The new handle assembly is improved because it has fewer number of parts, is a simpler design and is easier to assemble. Surgical instrument designers may use the methodology presented here to analyze the mechanical subsystems within complex instruments and to create new options that may offer improvements to the original design.

A preliminary study: validity and reliability of Turkish translation of migraine disability assessment (MIDAS) questionnaire in Turkish patients with chronic tension type headache.

PubMed

Gedikoglu, Umit; Ucler, Serap; Inan, Levent E; Coskun, Ozlem; Tunc, Tugba

2006-11-01

We have tested Turkish version of the Migraine Disability Assessment (MIDAS) questionnaire in patients with tension type headache. Thirty-two patients who had a tension type headache were included. Turkish version of the MIDAS questionnaire was applied to all patients. Additionally, the patients were asked to keep a 90-day diary. The day diary and the MIDAS questionnaire were compared at the end of the study period. We found that cronbach's alpha 0.82 and had good reliability. Our findings suggest that the MIDAS questionnaire that was originally designed for patients with migraine may be used in patients with chronic tension type headache.

A Study to Determine the Most Feasible Sign System for Improving the Flow of Patients in the Interior Hospital

DTIC Science & Technology

1985-08-01

29 E. NEW GRAPHICS DESIGNED BY AUTHOR ....... ................ .37 F. COST-BENEFIT ANALYSIS ........ ..................... ... 44 G. IMPLEMENTATION OF...Cornett, and Catherine Tillotson were invaluable in designing new hospital graphics . Finally, a big thanks for the faith and typing support of...February 1975): 25. "Careful Design Provides Outpatient Facility with Simple, Clear, Attractive Signage and Graphics ." Hospitals, Vol 53 (16 April 1979): 40

Trade Studies for a Manned High-Power Nuclear Electric Propulsion Vehicle

NASA Technical Reports Server (NTRS)

SanSoucie, Michael; Hull, Patrick V.; Irwin, Ryan W.; TInker, Michael L.; Patton, Bruce W.

2005-01-01

Nuclear electric propulsion (NEP) vehicles will be needed for future manned missions to Mars and beyond. Candidate vehicles must be identified through trade studies for further detailed design from a large array of possibilities. Genetic algorithms have proven their utility in conceptual design studies by effectively searching a large design space to pinpoint unique optimal designs. This research combines analysis codes for NEP subsystems with genetic algorithm-based optimization. Trade studies for a NEP reference mission to the asteroids were conducted to identify important trends, and to determine the effects of various technologies and subsystems on vehicle performance. It was found that the electric thruster type and thruster performance have a major impact on the achievable system performance, and that significant effort in thruster research and development is merited.

Exchangeability in the case-crossover design

PubMed Central

Mittleman, Murray A; Mostofsky, Elizabeth

2014-01-01

In cohort and case-control studies, confounding that arises as a result of differences in the distribution of determinants of the outcome between exposure groups leading to non-exchangeability are addressed by restriction, matching or with statistical models. In case-only studies, this issue is addressed by comparing each individual with his/herself. Although case-only designs use self-matching and only include individuals who develop the outcome of interest, issues of non-exchangeability are identical to those that arise in traditional case-control and cohort studies. In this review, we describe one type of case-only design, the case-crossover design, and discuss how the concept of exchangeability can be used to understand issues of confounding, carryover effects, period effects and selection bias in case-crossover studies. PMID:24756878

Lubricant based determination of design space for continuously manufactured high dose paracetamol tablets.

PubMed

Taipale-Kovalainen, Krista; Karttunen, Anssi-Pekka; Ketolainen, Jarkko; Korhonen, Ossi

2018-03-30

The objective of this study was to devise robust and stable continuous manufacturing process settings, by exploring the design space after an investigation of the lubrication-based parameters influencing the continuous direct compression tableting of high dose paracetamol tablets. Experimental design was used to generate a structured study plan which involved 19 runs. The formulation variables studied were the type of lubricant (magnesium stearate or stearic acid) and its concentration (0.5, 1.0 and 1.5%). Process variables were total production feed rate (5, 10.5 and 16kg/h), mixer speed rpm (500, 850 and 1200rpm), and mixer inlet port for lubricant (A or B). The continuous direct compression tableting line consisted of loss-in-weight feeders, a continuous mixer and a tablet press. The Quality Target Product Profile (QTPP) was defined for the final product, as the flowability of powder blends (2.5s), tablet strength (147N), dissolution in 2.5min (90%) and ejection force (425N). A design space was identified which fulfilled all the requirements of QTPP. The type and concentration of lubricant exerted the greatest influence on the design space. For example, stearic acid increased the tablet strength. Interestingly, the studied process parameters had only a very minor effect on the quality of the final product and the design space. It is concluded that the continuous direct compression tableting process itself is insensitive and can cope with changes in lubrication, whereas formulation parameters exert a major influence on the end product quality. Copyright © 2017 Elsevier B.V. All rights reserved.

Evaluation of three-dimensional virtual perception of garments

NASA Astrophysics Data System (ADS)

Aydoğdu, G.; Yeşilpinar, S.; Erdem, D.

2017-10-01

In recent years, three-dimensional design, dressing and simulation programs came into prominence in the textile industry. By these programs, the need to produce clothing samples for every design in design process has been eliminated. Clothing fit, design, pattern, fabric and accessory details and fabric drape features can be evaluated easily. Also, body size of virtual mannequin can be adjusted so more realistic simulations can be created. Moreover, three-dimensional virtual garment images created by these programs can be used while presenting the product to end-user instead of two-dimensional photograph images. In this study, a survey was carried out to investigate the visual perception of consumers. The survey was conducted for three different garment types, separately. Questions about gender, profession etc. was asked to the participants and expected them to compare real samples and artworks or three-dimensional virtual images of garments. When survey results were analyzed statistically, it is seen that demographic situation of participants does not affect visual perception and three-dimensional virtual garment images reflect the real sample characteristics better than artworks for each garment type. Also, it is reported that there is no perception difference depending on garment type between t-shirt, sweatshirt and tracksuit bottom.

Folding to Curved Surfaces: A Generalized Design Method and Mechanics of Origami-based Cylindrical Structures.

PubMed

Wang, Fei; Gong, Haoran; Chen, Xi; Chen, C Q

2016-09-14

Origami structures enrich the field of mechanical metamaterials with the ability to convert morphologically and systematically between two-dimensional (2D) thin sheets and three-dimensional (3D) spatial structures. In this study, an in-plane design method is proposed to approximate curved surfaces of interest with generalized Miura-ori units. Using this method, two combination types of crease lines are unified in one reprogrammable procedure, generating multiple types of cylindrical structures. Structural completeness conditions of the finite-thickness counterparts to the two types are also proposed. As an example of the design method, the kinematics and elastic properties of an origami-based circular cylindrical shell are analysed. The concept of Poisson's ratio is extended to the cylindrical structures, demonstrating their auxetic property. An analytical model of rigid plates linked by elastic hinges, consistent with numerical simulations, is employed to describe the mechanical response of the structures. Under particular load patterns, the circular shells display novel mechanical behaviour such as snap-through and limiting folding positions. By analysing the geometry and mechanics of the origami structures, we extend the design space of mechanical metamaterials and provide a basis for their practical applications in science and engineering.

Folding to Curved Surfaces: A Generalized Design Method and Mechanics of Origami-based Cylindrical Structures

NASA Astrophysics Data System (ADS)

Wang, Fei; Gong, Haoran; Chen, Xi; Chen, C. Q.

2016-09-01

Origami structures enrich the field of mechanical metamaterials with the ability to convert morphologically and systematically between two-dimensional (2D) thin sheets and three-dimensional (3D) spatial structures. In this study, an in-plane design method is proposed to approximate curved surfaces of interest with generalized Miura-ori units. Using this method, two combination types of crease lines are unified in one reprogrammable procedure, generating multiple types of cylindrical structures. Structural completeness conditions of the finite-thickness counterparts to the two types are also proposed. As an example of the design method, the kinematics and elastic properties of an origami-based circular cylindrical shell are analysed. The concept of Poisson’s ratio is extended to the cylindrical structures, demonstrating their auxetic property. An analytical model of rigid plates linked by elastic hinges, consistent with numerical simulations, is employed to describe the mechanical response of the structures. Under particular load patterns, the circular shells display novel mechanical behaviour such as snap-through and limiting folding positions. By analysing the geometry and mechanics of the origami structures, we extend the design space of mechanical metamaterials and provide a basis for their practical applications in science and engineering.

Folding to Curved Surfaces: A Generalized Design Method and Mechanics of Origami-based Cylindrical Structures

PubMed Central

Wang, Fei; Gong, Haoran; Chen, Xi; Chen, C. Q.

2016-01-01

Origami structures enrich the field of mechanical metamaterials with the ability to convert morphologically and systematically between two-dimensional (2D) thin sheets and three-dimensional (3D) spatial structures. In this study, an in-plane design method is proposed to approximate curved surfaces of interest with generalized Miura-ori units. Using this method, two combination types of crease lines are unified in one reprogrammable procedure, generating multiple types of cylindrical structures. Structural completeness conditions of the finite-thickness counterparts to the two types are also proposed. As an example of the design method, the kinematics and elastic properties of an origami-based circular cylindrical shell are analysed. The concept of Poisson’s ratio is extended to the cylindrical structures, demonstrating their auxetic property. An analytical model of rigid plates linked by elastic hinges, consistent with numerical simulations, is employed to describe the mechanical response of the structures. Under particular load patterns, the circular shells display novel mechanical behaviour such as snap-through and limiting folding positions. By analysing the geometry and mechanics of the origami structures, we extend the design space of mechanical metamaterials and provide a basis for their practical applications in science and engineering. PMID:27624892

Brayton heat exchanger unit development program (alternate design)

NASA Technical Reports Server (NTRS)

Duncan, J. D.; Gibson, J. C.; Graves, R. F.; Morse, C. J.; Richard, C. E.

1973-01-01

A Brayton Heat Exchanger Unit Alternate Design (BHXU-Alternate) consisting of a recuperator, a heat sink heat exchanger, and a gas ducting system, was designed and fabricated. The design was formulated to provide a high performance unit suitable for use in a long-life Brayton-cycle powerplant. Emphasis was on double containment against external leakage and leakage of the organic coolant into the gas stream. A parametric analysis and design study was performed to establish the optimum component configurations to achieve low weight and size and high reliability, while meeting the requirements of high effectiveness and low pressure drop. Layout studies and detailed mechanical and structural design were performed to obtain a flight-type packaging arrangement, including the close-coupled integration of the BHXU-Alternate with the Brayton Rotating Unit (BRU).

[Discussion on development of four diagnostic information scale for clinical re-evaluation of postmarketing herbs].

PubMed

He, Wei; Xie, Yanming; Wang, Yongyan

2011-12-01

Post-marketing re-evaluation of Chinese herbs can well reflect Chinese medicine characteristics, which is the most easily overlooked the clinical re-evaluation content. Since little attention has been paid to this, study on the clinical trial design method was lost. It is difficult to improving the effectiveness and safety of traditional Chinese medicine. Therefore, more attention should be paid on re-evaluation of the clinical trial design method point about tcm syndrome such as the type of research program design, the study of Chinese medical information collection scale and statistical analysis methods, so as to improve the clinical trial design method study about tcm syndrome of Chinese herbs postmarketing re-evalutation status.

Risk factors for child abuse: quantitative correlational design.

PubMed

Ben-Natan, Merav; Sharon, Ira; Barbashov, Polina; Minasyan, Yulia; Hanukayev, Isabella; Kajdan, David; Klein-Kremer, Adi

2014-01-01

The aim of this research study is to identify risk factors typical of different types of suspected child abuse reported at a hospital. The study was based on 114 cases of children for whom some type of abuse was reported. Physical abuse was the most frequently reported of all types of suspected child abuse. Most victims of sexual abuse were female and at least half the cases of neglect and physical abuse were attributed to parents. Most cases were identified in the emergency room by nurses. Children older than 10 were more susceptible to physical abuse and neglect. © 2014.

Optimal hydraulic design of new-type shaft tubular pumping system

NASA Astrophysics Data System (ADS)

Zhu, H. G.; Zhang, R. T.; Zhou, J. R.

2012-11-01

Based on the characteristics of large flow rate, low-head, short annual operation time and high reliability of city flood-control pumping stations, a new-type shaft tubular pumping system featuring shaft suction box, siphon-type discharge passage with vacuum breaker as cutoff device was put forward, which possesses such advantages as simpler structure, reliable cutoff and higher energy performance. According to the design parameters of a city flood control pumping station, a numerical computation model was set up including shaft-type suction box, siphon-type discharge passage, pump impeller and guide vanes. By using commercial CFD software Fluent, RNG κ-epsilon turbulence model was adopted to close the three-dimensional time-averaged incompressible N-S equations. After completing optimal hydraulic design of shaft-type suction box, and keeping the parameters of total length, maximum width and outlet section unchanged, siphon-type discharge passages of three hump locations and three hump heights were designed and numerical analysis on the 9 hydraulic design schemes of pumping system were proceeded. The computational results show that the changing of hump locations and hump heights directly affects the internal flow patterns of discharge passages and hydraulic performances of the system, and when hump is located 3.66D from the inlet section and hump height is about 0.65D (D is the diameter of pump impeller), the new-type shaft tubular pumping system achieves better energy performances. A pumping system model test of the optimal designed scheme was carried out. The result shows that the highest pumping system efficiency reaches 75.96%, and when at design head of 1.15m the flow rate and system efficiency were 0.304m3/s and 63.10%, respectively. Thus, the validity of optimal design method was verified by the model test, and a solid foundation was laid for the application and extension of the new-type shaft tubular pumping system.

Sustainable supply chain design: a configurational approach.

PubMed

Masoumik, S Maryam; Abdul-Rashid, Salwa Hanim; Olugu, Ezutah Udoncy; Raja Ghazilla, Raja Ariffin

2014-01-01

Designing the right supply chain that meets the requirements of sustainable development is a significant challenge. Although there are a considerable number of studies on issues relating to sustainable supply chain design (SSCD) in terms of designing the practices, processes, and structures, they have rarely demonstrated how these components can be aligned to form an effective sustainable supply chain (SSC). Considering this gap in the literature, this study adopts the configurational approach to develop a conceptual framework that could configure the components of a SSC. In this respect, a process-oriented approach is utilized to classify and harmonize the design components. A natural-resource-based view (NRBV) is adopted to determine the central theme to align the design components around. The proposed framework presents three types of SSC, namely, efficient SSC, innovative SSC, and reputed SSC. The study culminates with recommendations concerning the direction for future research.

Sustainable Supply Chain Design: A Configurational Approach

PubMed Central

Masoumik, S. Maryam; Raja Ghazilla, Raja Ariffin

2014-01-01

Designing the right supply chain that meets the requirements of sustainable development is a significant challenge. Although there are a considerable number of studies on issues relating to sustainable supply chain design (SSCD) in terms of designing the practices, processes, and structures, they have rarely demonstrated how these components can be aligned to form an effective sustainable supply chain (SSC). Considering this gap in the literature, this study adopts the configurational approach to develop a conceptual framework that could configure the components of a SSC. In this respect, a process-oriented approach is utilized to classify and harmonize the design components. A natural-resource-based view (NRBV) is adopted to determine the central theme to align the design components around. The proposed framework presents three types of SSC, namely, efficient SSC, innovative SSC, and reputed SSC. The study culminates with recommendations concerning the direction for future research. PMID:24523652

Injector design guidelines for gas/liquid propellant systems

NASA Technical Reports Server (NTRS)

Falk, A. Y.; Burick, R. J.

1973-01-01

Injector design guidelines are provided for gas/liquid propellant systems. Information was obtained from a 30-month applied research program encompassing an analytical, design, and experimental effort to relate injector design parameters to simultaneous attainment of high performance and component (injector/thrust chamber) compatibility for gas/liquid space storable propellants. The gas/liquid propellant combination studied was FLOX (82.6% F2)/ ambient temperature gaseous methane. Design criteria that provide for simultaneous attainment of high performance and chamber compatibility are presented for both injector types. Parametric data are presented that are applicable for the design of circular coaxial and like-doublet injectors that operate with design parameters similar to those employed. However, caution should be exercised when applying these data to propellant combinations whose elements operate in ranges considerably different from those employed in this study.

46 CFR 154.439 - Tank design.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Tank design. 154.439 Section 154.439 Shipping COAST... SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Independent Tank Type A § 154.439 Tank design. An independent tank type A must meet the deep tank standard of the...

46 CFR 154.438 - Design vapor pressure.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Design vapor pressure. 154.438 Section 154.438 Shipping... FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Independent Tank Type A § 154.438 Design vapor pressure. (a) If the surface of an independent tank type A are...