Validation of the FEA of a deep drawing process with additional force transmission

NASA Astrophysics Data System (ADS)

Behrens, B.-A.; Bouguecha, A.; Bonk, C.; Grbic, N.; Vucetic, M.

2017-10-01

In order to meet requirements by automotive industry like decreasing the CO2 emissions, which reflects in reducing vehicles mass in the car body, the chassis and the powertrain, the continuous innovation and further development of existing production processes are required. In sheet metal forming processes the process limits and components characteristics are defined through the process specific loads. While exceeding the load limits, a failure in the material occurs, which can be avoided by additional force transmission activated in the deep drawing process before the process limit is achieved. This contribution deals with experimental investigations of a forming process with additional force transmission regarding the extension of the process limits. Based on FEA a tool system is designed and developed by IFUM. For this purpose, the steel material HCT600 is analyzed numerically. Within the experimental investigations, the deep drawing processes, with and without the additional force transmission are carried out. Here, a comparison of the produced rectangle cups is done. Subsequently, the identical deep drawing processes are investigated numerically. Thereby, the values of the punch reaction force and displacement are estimated and compared with experimental results. Thus, the validation of material model is successfully carried out on process scale. For further quantitative verification of the FEA results the experimental determined geometry of the rectangular cup is measured optically with ATOS system of the company GOM mbH and digitally compared with external software Geomagic®QualifyTM. The goal of this paper is the verification of the transferability of the FEA model for a conventional deep drawing process to a deep drawing process with additional force transmission with a counter punch.

Process Simulation of Aluminium Sheet Metal Deep Drawing at Elevated Temperatures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Winklhofer, Johannes; Trattnig, Gernot; Lind, Christoph

Lightweight design is essential for an economic and environmentally friendly vehicle. Aluminium sheet metal is well known for its ability to improve the strength to weight ratio of lightweight structures. One disadvantage of aluminium is that it is less formable than steel. Therefore complex part geometries can only be realized by expensive multi-step production processes. One method for overcoming this disadvantage is deep drawing at elevated temperatures. In this way the formability of aluminium sheet metal can be improved significantly, and the number of necessary production steps can thereby be reduced. This paper introduces deep drawing of aluminium sheet metalmore » at elevated temperatures, a corresponding simulation method, a characteristic process and its optimization. The temperature and strain rate dependent material properties of a 5xxx series alloy and their modelling are discussed. A three dimensional thermomechanically coupled finite element deep drawing simulation model and its validation are presented. Based on the validated simulation model an optimised process strategy regarding formability, time and cost is introduced.« less

Numerical Simulation of Hydro-mechanical Deep Drawing — A Study on the Effect of Process Parameters on Drawability and Thickness Variation

NASA Astrophysics Data System (ADS)

Singh, Swadesh Kumar; Kumar, D. Ravi

2005-08-01

Hydro-mechanical deep drawing is a process for producing cup shaped parts with the assistance of a pressurized fluid. In the present work, numerical simulation of the conventional and counter pressure deep drawing processes has been done with the help of a finite element method based software. Simulation results were analyzed to study the improvement in drawability by using hydro-mechanical processes. The thickness variations in the drawn cups were analyzed and also the effect of counter pressure and oil gap on the thickness distribution was studied. Numerical simulations were also used for the die design, which combines both drawing and ironing processes in a single operation. This modification in the die provides high drawability, facilitates smooth material flow, gives more uniform thickness distribution and corrects the shape distortion.

Investigation of surface finishing of carbon based coated tools for dry deep drawing of aluminium alloys

NASA Astrophysics Data System (ADS)

Steiner, J.; Andreas, K.; Merklein, M.

2016-11-01

Global trends like growing environmental awareness and demand for resource efficiency motivate an abandonment of lubricants in metal forming. However, dry forming evokes increased friction and wear. Especially, dry deep drawing of aluminum alloys leads to intensive interaction between tool and workpiece due to its high adhesion tendency. One approach to improve the tribological behavior is the application of carbon based coatings. These coatings are characterized by high wear resistance. In order to investigate the potential of carbon based coatings for dry deep drawing, friction and wear behavior of different coating compositions are evaluated in strip drawing tests. This setup is used to model the tribological conditions in the flange area of deep drawing operations. The tribological behavior of tetrahedral amorphous (ta-C) and hydrogenated amorphous carbon coatings with and without tungsten modification (a-C:H:W, a-C:H) is investigated. The influence of tool topography is analyzed by applying different surface finishing. The results show reduced friction with decreased roughness for coated tools. Besides tool topography the coating type determines the tribological conditions. Smooth tools with ta-C and a-C:H coatings reveal low friction and prevent adhesive wear. In contrast, smooth a-C:H:W coated tools only lead to slight improvement compared to rough, uncoated specimen.

Data augmentation-assisted deep learning of hand-drawn partially colored sketches for visual search

PubMed Central

Muhammad, Khan; Baik, Sung Wook

2017-01-01

In recent years, image databases are growing at exponential rates, making their management, indexing, and retrieval, very challenging. Typical image retrieval systems rely on sample images as queries. However, in the absence of sample query images, hand-drawn sketches are also used. The recent adoption of touch screen input devices makes it very convenient to quickly draw shaded sketches of objects to be used for querying image databases. This paper presents a mechanism to provide access to visual information based on users’ hand-drawn partially colored sketches using touch screen devices. A key challenge for sketch-based image retrieval systems is to cope with the inherent ambiguity in sketches due to the lack of colors, textures, shading, and drawing imperfections. To cope with these issues, we propose to fine-tune a deep convolutional neural network (CNN) using augmented dataset to extract features from partially colored hand-drawn sketches for query specification in a sketch-based image retrieval framework. The large augmented dataset contains natural images, edge maps, hand-drawn sketches, de-colorized, and de-texturized images which allow CNN to effectively model visual contents presented to it in a variety of forms. The deep features extracted from CNN allow retrieval of images using both sketches and full color images as queries. We also evaluated the role of partial coloring or shading in sketches to improve the retrieval performance. The proposed method is tested on two large datasets for sketch recognition and sketch-based image retrieval and achieved better classification and retrieval performance than many existing methods. PMID:28859140

Influence of asymmetrical drawing radius deviation in micro deep drawing

NASA Astrophysics Data System (ADS)

Heinrich, L.; Kobayashi, H.; Shimizu, T.; Yang, M.; Vollertsen, F.

2017-09-01

Nowadays, an increasing demand for small metal parts in electronic and automotive industries can be observed. Deep drawing is a well-suited technology for the production of such parts due to its excellent qualities for mass production. However, the downscaling of the forming process leads to new challenges in tooling and process design, such as high relative deviation of tool geometry or blank displacement compared to the macro scale. FEM simulation has been a widely-used tool to investigate the influence of symmetrical process deviations as for instance a global variance of the drawing radius. This study shows a different approach that allows to determine the impact of asymmetrical process deviations on micro deep drawing. In this particular case the impact of an asymmetrical drawing radius deviation and blank displacement on cup geometry deviation was investigated for different drawing ratios by experiments and FEM simulation. It was found that both variations result in an increasing cup height deviation. Nevertheless, with increasing drawing ratio a constant drawing radius deviation has an increasing impact, while blank displacement results in a decreasing offset of the cups geometry. This is explained by different mechanisms that result in an uneven cup geometry. While blank displacement leads to material surplus on one side of the cup, an unsymmetrical radius deviation on the other hand generates uneven stretching of the cups wall. This is intensified for higher drawing ratios. It can be concluded that the effect of uneven radius geometry proves to be of major importance for the production of accurately shaped micro cups and cannot be compensated by intentional blank displacement.

5. INTERIOR VIEW OF BASEMENT, LOOKING WEST. DEEP DRAW, HEAVY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. INTERIOR VIEW OF BASEMENT, LOOKING WEST. DEEP DRAW, HEAVY PRESS MANUFACTURED BY E. W. BLISS CO., BROOKLYN, NEW YORK. PRESS #3-3/4 S, PATENTED BY E. W. BLISS CO., AUGUST 16, 1892, AND JANUARY 31, 1893. THIS PRESS DATES FROM CA. 1920. - Illinois Pure Aluminum Company, 109 Holmes Street, Lemont, Cook County, IL

Studies in Cup Drawing Behavior of Polymer Laminated Sheet Metal

NASA Astrophysics Data System (ADS)

Elnagmi, M.; Jain, M.; Bruhis, M.; Nielsen, K.

2011-08-01

Axisymmetric deep drawing behavior of a polymer laminated sheet metal (PLSM) is investigated using an axisymmetric cup drawing test. PLSMs are of interest as a replacement for painted finishes for automotive applications as they have the potential to achieve good quality long lasting and aesthetically appealing surfaces on stamped parts. However, there is limited understanding of PLSMs in automotive deep drawing situations to produce complex 3-D parts. The tests are carried out using well-controlled, laboratory-based, dual-action, servo-hydraulic forming presses under blank-holder force and punch displacement control conditions. An optical strain mapping system is used to measure the surface strains (and to construct 3D strain maps) from the film side of the deformed samples for a range of forming conditions. Deep drawing characteristics such as punch load versus punch displacement traces, strain distribution along the cup profile, flange wrinkling and fracture characteristics are experimentally assessed for stainless steel-plastic film laminated sheet materials. Also the effect of lamination pressure on wrinkling and delamination is investigated for a decorative pressure sensitive adhesive film affixed to the stainless steel sheet.

Feedback control in deep drawing based on experimental datasets

NASA Astrophysics Data System (ADS)

Fischer, P.; Heingärtner, J.; Aichholzer, W.; Hortig, D.; Hora, P.

2017-09-01

In large-scale production of deep drawing parts, like in automotive industry, the effects of scattering material properties as well as warming of the tools have a significant impact on the drawing result. In the scope of the work, an approach is presented to minimize the influence of these effects on part quality by optically measuring the draw-in of each part and adjusting the settings of the press to keep the strain distribution, which is represented by the draw-in, inside a certain limit. For the design of the control algorithm, a design of experiments for in-line tests is used to quantify the influence of the blank holder force as well as the force distribution on the draw-in. The results of this experimental dataset are used to model the process behavior. Based on this model, a feedback control loop is designed. Finally, the performance of the control algorithm is validated in the production line.

Analysis of earing behaviour in deep drawing of ASS 304 at elevated temperature

NASA Astrophysics Data System (ADS)

Gupta, Amit Kumar; Deole, Aditya; Kotkunde, Nitin; Singh, Swadesh Kumar; jella, Gangadhar

2016-08-01

Earing tendency in a deep drawn cup of circular blanks is one the most prominent characteristics observed due to anisotropy in a metal sheet. Such formation of uneven rim is mainly due to dissimilarity in yield stress as well as Lankford parameter (r- value) in different orientations. In this paper, an analytical function coupled with different yield functions viz., Hill 1948, Barlat 1989 and Barlat Yld 2000-2d has been used to provide an approximation of earing profile. In order to validate the results, material parameters for yield functions and hardening rule have been calibrated for ASS 304 at 250°C and deep drawing experiment is conducted to measure the earing profile. The predicted earing profiles based on analytical results have been validated using experimental earing profile. Based on this analysis, Barlat Yld 2000-2d has been observed to be a well suited yield model for deep drawing of ASS 304, which also confirms the reliability of analytical function for earing profile estimation.

Sex differences in college students' free drawings and their relationship to 2D:4D ratio and recalled childhood play behavior.

PubMed

Rothkopf, Ian; Turgeon, Sarah M

2014-02-01

In a prior study, we observed that female-typical characteristics in elementary school girls' drawings were correlated with a feminized digit ratio (2D:4D), a marker for prenatal androgen exposure. However, this observation was limited to older girls, suggesting that social factors mediate the relationship between 2D:4D and drawing. To examine the hypothesis that the influence of prenatal androgen on girls' drawing is mediated by an effect of early androgens on sex-typical behavior, we examined 2D:4D, free drawings, and scores on the Recalled Childhood Gender Identity (RCGI) Questionnaire in a population of college students. Characteristics of participants' free drawings were assessed and those that showed sex differences were compared with 2D:4D and RCGI scores. Men had smaller 2D:4D ratios than women, used fewer total colors, used fewer pinks, purples, and blues, and had higher gender-typical scores on the RCGI. Women's drawings were more likely to contain flowers and animals and men's drawings were more likely to represent sports. Within-sex RCGI and 2D:4D scores were not significantly correlated. Significant within-sex relationships between 2D:4D and RCGI and drawing behavior were observed but the effects appeared to be independent; the hypothesis that gender-typical childhood behavior mediates the effect of prenatal androgen on drawing characteristics was not supported.

Formability of paperboard during deep-drawing with local steam application

NASA Astrophysics Data System (ADS)

Franke, Wilken; Stein, Philipp; Dörsam, Sven; Groche, Peter

2018-05-01

The use of paperboard can significantly improve the environmental compatibility of everyday products such as packages. Nevertheless, most packages are currently made of plastics, since the three-dimensional shaping of paperboard is possible only to a limited extent. In order to increase the forming possibilities, deep drawing of cardboard has been intensively investigated for more than a decade. An improvement with regard to increased forming limits has been achieved by heating of the tool parts, which leads to a softening of paperboard constituents such as lignin. A further approach is the moistening of the samples, whereby the hydrogen bonds between the fibers are weakened and as a result an increase of the formability. It is expected that a combination of both parameter approaches will result in a significant increase in the forming capacity and in the shape accuracy. For this reason, a new tool concept is introduced within the scope of this work which makes it possible to moisten samples during the deep drawing process by means of steam supply. The conducted investigations show that spring-back in the preferred fiber direction can be reduced by 38 %. Orthogonal to the preferred fiber direction a reduction of spring back of up to 79 % is determined, which corresponds to a perfect shape. Moreover, it was determined that the steam duration and the initial moisture content have an influence on the final shape. In addition to the increased dimensional accuracy, an optimized wrinkle compression compared to conventional deep drawing is found. According to the results, it can be summarized that a steam application in the deep drawing of paperboard significantly improves the part quality.

Numerical-experimental investigation of load paths in DP800 dual phase steel during Nakajima test

NASA Astrophysics Data System (ADS)

Bergs, Thomas; Nick, Matthias; Feuerhack, Andreas; Trauth, Daniel; Klocke, Fritz

2018-05-01

Fuel efficiency requirements demand lightweight construction of vehicle body parts. The usage of advanced high strength steels permits a reduction of sheet thickness while still maintaining the overall strength required for crash safety. However, damage, internal defects (voids, inclusions, micro fractures), microstructural defects (varying grain size distribution, precipitates on grain boundaries, anisotropy) and surface defects (micro fractures, grooves) act as a concentration point for stress and consequently as an initiation point for failure both during deep drawing and in service. Considering damage evolution in the design of car body deep drawing processes allows for a further reduction in material usage and therefore body weight. Preliminary research has shown that a modification of load paths in forming processes can help mitigate the effects of damage on the material. This paper investigates the load paths in Nakajima tests of a DP800 dual phase steel to research damage in deep drawing processes. Investigation is done via a finite element model using experimentally validated material data for a DP800 dual phase steel. Numerical simulation allows for the investigation of load paths with respect to stress states, strain rates and temperature evolution, which cannot be easily observed in physical experiments. Stress triaxiality and the Lode parameter are used to describe the stress states. Their evolution during the Nakajima tests serves as an indicator for damage evolution. The large variety of sheet metal forming specific load paths in Nakajima tests allows a comprehensive evaluation of damage for deep drawing. The results of the numerical simulation conducted in this project and further physical experiments will later be used to calibrate a damage model for simulation of deep drawing processes.

23. Photocopy of Drawing (November 1934 Architectural Drawings by Burge ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

23. Photocopy of Drawing (November 1934 Architectural Drawings by Burge and Stevens, in Possession of the Engineering and Capital Improvements Department of the Atlanta Housing Authority, Atlanta, Georgia). TYPICAL WALL SECTION AND ELEVATION, TYPICAL DETAILS OF HEAD, SILL, BASE, JAMB, AND METAL DOOR FRAMES, DETAIL OF STONE COPING, AND STONE SILL ALTERNATE, LINTEL SCHEDULE, TECHWOOD PROJECT #1101, SHEET A-51. - Techwood Homes, Building No. 1, 575-579 Techwood Drive, Atlanta, Fulton County, GA

Effects of hypnosis and level of processing on repeated recall of line drawings.

PubMed

McKelvie, S J; Pullara, M

1988-07-01

Moderately susceptible subjects (N = 30) initially judged 30 line drawings of objects for pleasantness (deep processing) and 30 line drawings for visual complexity (shallow processing), after which they were given two immediate recall tests. Following a 48-hr delay, subjects were allocated randomly to hypnosis, simulation, or neutral control conditions and were tested four more times. Subjects produced more correct and incorrect responses over the six trials and gave a higher number of correct responses for deep items than for shallow items. Over the last four trials, hypnosis had no general facilitative effect relative to the other two treatments, but the effect of depth was strongest for hypnotized subjects, who recalled more deep items than did the controls. Finally, both hypnotized and simulating subjects rated their recall as more involuntary and their experimental treatment as more helpful than did the controls. Caution is urged in the forensic use of hypnosis as a retrieval device.

The drawing effect: Evidence for reliable and robust memory benefits in free recall.

PubMed

Wammes, Jeffrey D; Meade, Melissa E; Fernandes, Myra A

2016-01-01

In 7 free-recall experiments, the benefit of creating drawings of to-be-remembered information relative to writing was examined as a mnemonic strategy. In Experiments 1 and 2, participants were presented with a list of words and were asked to either draw or write out each. Drawn words were better recalled than written. Experiments 3-5 showed that the memory boost provided by drawing could not be explained by elaborative encoding (deep level of processing, LoP), visual imagery, or picture superiority, respectively. In Experiment 6, we explored potential limitations of the drawing effect, by reducing encoding time and increasing list length. Drawing, relative to writing, still benefited memory despite these constraints. In Experiment 7, the drawing effect was significant even when encoding trial types were compared in pure lists between participants, inconsistent with a distinctiveness account. Together these experiments indicate that drawing enhances memory relative to writing, across settings, instructions, and alternate encoding strategies, both within- and between-participants, and that a deep LoP, visual imagery, or picture superiority, alone or collectively, are not sufficient to explain the observed effect. We propose that drawing improves memory by encouraging a seamless integration of semantic, visual, and motor aspects of a memory trace.

Brief report: human figure drawings by children with Asperger's syndrome.

PubMed

Lim, Hui Keow; Slaughter, Virginia

2008-05-01

Twenty-nine children with Asperger's syndrome and 28 typically developing children, matched on gender, chronological age and nonverbal IQ, were asked to produce a free drawing, then requested to draw a person, a house and a tree. The drawings were scored using standardized procedures for assessing accuracy, detail and complexity. There were no differences between the diagnostic groups on the tree or house drawing scores. The human figure drawing scores of children with Asperger's syndrome were significantly lower than those of the typically developing children, and there was a positive correlation between human figure drawing scores and communication sub-scores on the Vineland Adaptive Behaviour Scales, for the Asperger's group. These results suggest that the selective deficit in generating human figure representations may derive from a relative lack of interest in the social world, and/or limited practice in drawing people.

Thinking inside the box: Spatial frames of reference for drawing in Williams syndrome and typical development.

PubMed

Hudson, Kerry D; Farran, Emily K

2017-09-01

Successfully completing a drawing relies on the ability to accurately impose and manipulate spatial frames of reference for the object that is being drawn and for the drawing space. Typically developing (TD) children use cues such as the page boundary as a frame of reference to guide the orientation of drawn lines. Individuals with Williams syndrome (WS) typically produce incohesive drawings; this is proposed to reflect a local processing bias. Across two studies, we provide the first investigation of the effect of using a frame of reference when drawing simple lines and shapes in WS and TD groups (matched for non-verbal ability). Individuals with WS (N=17 Experiment 1; N=18 Experiment 2) and TD children matched by non-verbal ability drew single lines (Experiment One) and whole shapes (Experiment Two) within a neutral, incongruent or congruent frame. The angular deviation of the drawn line/shape, relative to the model line/shape, was measured. Both groups were sensitive to spatial frames of reference when drawing single lines and whole shapes, imposed by a frame around the drawing space. A local processing bias in WS cannot explain poor drawing performance in WS. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

Development of Gender Discrimination: Effect of Sex-Typical and Sex-Atypical Toys.

ERIC Educational Resources Information Center

Etaugh, Claire; Duits, Terri L.

Toddlers (41 girls and 35 boys) between 18 and 37 months of age were given four gender discrimination tasks each consisting of 6 pairs of color drawings. Three of the tasks employed color drawings of preschool girls and boys holding either a sex-typical toy, a sex-atypical toy, or no toy. The fourth employed pictures of sex-typical masculine and…

Deep drawing of 304 L Steel Sheet using Vegetable oils as Forming Lubricants

NASA Astrophysics Data System (ADS)

Shashidhara, Y. M.; Jayaram, S. R.

2012-12-01

The study involves the evaluation of deep drawing process using two non edible oils, Pongam (Pongammia pinnata) and Jatropha (Jatropha carcass) as metal forming lubricants. Experiments are conducted on 304L steel sheets under the raw and modified oils with suitable punch and die on a hydraulic press of 200 ton capacity. The punch load, draw-in-length and wall thickness distribution for deep drawn cups are observed. The drawn cups are scanned using laser scanning technique and 3D models are generated using modeling package. The wall thickness profiles of cups at different sections (or height) are measured using CAD package. Among the two raw oils, the drawn cups under Jatropha oil, have uniform wall thickness profile compared to Pongam oil. Uneven flow of material and cup rupturing is observed under methyl esters of Pongam and Jatropha oil lubricated conditions. However, the results are observed under epoxidised Jatropha oil with uniform metal flow and wall thicknesses compared to mineral and other versions of vegetable oils.

Prediction of forming limit in hydro-mechanical deep drawing of steel sheets using ductile fracture criterion

NASA Astrophysics Data System (ADS)

Oh, S.-T.; Chang, H.-J.; Oh, K. H.; Han, H. N.

2006-04-01

It has been observed that the forming limit curve at fracture (FLCF) of steel sheets, with a relatively higher ductility limit have linear shapes, similar to those of a bulk forming process. In contrast, the FLCF of sheets with a relatively lower ductility limit have rather complex shapes approaching the forming limit curve at neck (FLCN) towards the equi-biaxial strain paths. In this study, the FLCFs of steel sheets were measured and compared with the fracture strains predicted from specific ductile fracture criteria, including a criterion suggested by the authors, which can accurately describe FLCFs with both linear and complex shapes. To predict the forming limit for hydro-mechanical deep drawing of steel sheets, the ductile fracture criteria were integrated into a finite element simulation. The simulation, results based on the criterion suggested by authors accurately predicted the experimetal, fracture limits of steel sheets for the hydro-mechanical deep drawing process.

Forming Limit Diagram of Titanium and Stainless Steel Alloys to Study the Formability of Hydro-Mechanical Deep Drawing Parts

NASA Astrophysics Data System (ADS)

Shirizly, A.

2005-08-01

The increase demand for stronger, lighter and economic sheet metal products, make the Hydromecanical deep drawing process lately more and more popular. The Hydromecanical process is used in almost all types of sheet metal parts from home appliances and kitchenware to automotive and aviation industries. Therefore, many common materials were tested and characterized by their ability to sustain large strains via the well known Forming Limit Diagram (FLD). The aim of this work is to examine the forming capability if the Hydromecanical process in production of hemisphere parts made of materials commonly used in the aviation and aerospace industries. Experimental procedures were carried out to assess their ductility through FLD and the Forming Limit Carve (FLC).Two type of material sheets were tested herewith for demonstrating the procedure: commercial pure titanium and stainless steel 316L. A numerical simulation of the Hydromecanical process was examined and compared to self made Hydromecanical deep drawing of hemispherical parts.

Using Ethnic Art to Emphasize Laws of Reflection

NASA Astrophysics Data System (ADS)

Bapat, Madhuri

2009-11-01

The Kolam (Rangolee) art (Fig. 1) from Southern India and Sona drawings (Fig. 2) from Africa show the similarity of lines going around the dots. Kolam is usually drawn, with paste made up of rice powder, on the floor in front of a house. Typically girls draw these in India on occasions such as welcoming the spring season, weddings, or birthdays. Sona drawings are drawn in the sand using fingers. Typically young boys in Africa were taught to draw these as they went through puberty. They used to impress their masters by drawing these designs quickly in sand and erasing them afterwards. So Europeans never learned these designs. Due to slavery this art or knowledge has disappeared.

Looking around houses: attention to a model when drawing complex shapes in Williams syndrome and typical development.

PubMed

Hudson, Kerry D; Farran, Emily K

2013-09-01

Drawings by individuals with Williams syndrome (WS) typically lack cohesion. The popular hypothesis is that this is a result of excessive focus on local-level detail at the expense of global configuration. In this study, we explored a novel hypothesis that inadequate attention might underpin drawing in WS. WS and typically developing (TD) non-verbal ability matched groups copied and traced a house figure comprised of geometric shapes. The house was presented on a computer screen for 5-s periods and participants pressed a key to re-view the model. Frequency of key-presses indexed the looks to the model. The order that elements were replicated was recorded to assess hierarchisation of elements. If a lack of attention to the model explained poor drawing performance, we expected participants with WS to look less frequently to the model than TD children when copying. If a local-processing preference underpins drawing in WS, more local than global elements would be produced. Results supported the first, but not second hypothesis. The WS group looked to the model infrequently, but global, not local, parts were drawn first, scaffolding local-level details. Both groups adopted a similar order of drawing and tracing of parts, suggesting typical, although delayed strategy-use in the WS group. Additionally both groups drew larger elements of the model before smaller elements, suggested a size-bias when drawing. Copyright © 2013 Elsevier Ltd. All rights reserved.

The Road Less Travelled: The Deep Challenges of Social Transformations

NASA Astrophysics Data System (ADS)

O'Brien, K. L.; Moser, S. C.

2016-12-01

How do we create the societal transformations necessary to stabilize the global climate and address other global goals? The roadmap metaphor guiding this session reflects a managerial approach to deep decarbonization, one that can be planned, charted, guided and implemented with the tools already known. Transformations and systems change involve far more than technical innovations, policy instruments and behavioral change. Drawing on a wide range of research on transformation processes from the social sciences and humanities and systems science, we argue that current approaches to decarbonization are likely to fail if they ignore theories of social change, including insights on the dynamics of social, cultural, economic and political transformations. Climate stabilization also calls for attention to the relationships between human values, political agency, power, and institutional change. It is precisely these deeper dynamics - which are typically ignored - that stall transformative change. Rather than developing a carbon road map, we suggest both a wider and deeper exploration of the territory of social transformation is needed, and suggest both different metaphors and methods to engage individual change agents and communities of actors, who together can create pathways to sustainability.

Facilitating complex shape drawing in Williams syndrome and typical development.

PubMed

Hudson, Kerry D; Farran, Emily K

2013-07-01

Individuals with Williams syndrome (WS) produce drawings that are disorganised, likely due to an inability to replicate numerous spatial relations between parts. This study attempted to circumvent these drawing deficits in WS when copying complex combinations of one, two and three shapes. Drawing decisions were reduced by introducing a number of facilitators, for example, by using distinct colours and including facilitatory cues on the response sheet. Overall, facilitation improved drawing in the WS group to a comparable level of accuracy as typically developing participants (matched for non-verbal ability). Drawing accuracy was greatest in both groups when planning demands (e.g. starting location, line lengths and changes in direction) were reduced by use of coloured figures and providing easily distinguished and clearly grouped facilitatory cues to form each shape. This study provides the first encouraging evidence to suggest that drawing of complex shapes in WS can be facilitated; individuals with WS might be receptive to remediation programmes for drawing and handwriting. Copyright © 2013 Elsevier Ltd. All rights reserved.

A Drawing Task to Assess Emotion Inference in Language-Impaired Children.

PubMed

Vendeville, Nathalie; Blanc, Nathalie; Brechet, Claire

2015-10-01

Studies investigating the ability of children with language impairment (LI) to infer emotions rely on verbal responses (which can be challenging for these children) and/or the selection of a card representing an emotion (which limits the response range). In contrast, a drawing task might allow a broad spectrum of responses without involving language. This study used a drawing task to compare the ability to make emotional inferences in children with and without LI. Twenty-two children with LI and 22 typically developing children ages 6 to 10 years were assessed in school during 3 sessions. They were asked to listen to audio stories. At specific moments, the experimenter stopped the recording and asked children to complete the drawing of a face to depict the emotion felt by the story's character. Three adult study-blind judges were subsequently asked to evaluate the expressiveness of the drawings. Children with LI had more difficulty than typically developing children making emotional inferences. Children with LI also made more errors of different valence than their typically developing peers. Our findings confirm that children with LI show difficulty in producing emotional inferences, even when performing a drawing task--a relatively language-free response mode.

Precocious realists: perceptual and cognitive characteristics associated with drawing talent in non-autistic children

PubMed Central

Drake, Jennifer E.; Winner, Ellen

2009-01-01

A local processing bias in the block design task and in drawing strategy has been used to account for realistic drawing skill in individuals with autism. We investigated whether the same kind of local processing bias is seen in typically developing children with unusual skill in realistic graphic representation. Forty-three 5–11-year-olds who drew a still life completed a version of the block design task in both standard and segmented form, were tested for their memory for the block design items, and were given the Kaufmann Brief Intelligence Test-II. Children were classified as gifted, moderately gifted or typical on the basis of the level of realism in their drawings. Similar to autistic individuals, the gifted group showed a local processing bias in the block design task. But unlike autistic individuals, the gifted group showed a global advantage in the visual memory task and did not use a local drawing strategy; in addition, their graphic realism skill was related to verbal IQ. Differences in the extent of local processing bias in autistic and typically developing children with drawing talent are discussed. PMID:19528030

Electro-thermo-mechanical coupling analysis of deep drawing with resistance heating for aluminum matrix composites sheet

NASA Astrophysics Data System (ADS)

Zhang, Kaifeng; Zhang, Tuoda; Wang, Bo

2013-05-01

Recently, electro-plastic forming to be a focus of attention in materials hot processing research area, because it is a sort of energy-saving, high efficient and green manufacturing technology. An electro-thermo-mechanical model can be adopted to carry out the sequence simulation of aluminum matrix composites sheet deep drawing via electro-thermal coupling and thermal-mechanical coupling method. The first step of process is resistance heating of sheet, then turn off the power, and the second step is deep drawing. Temperature distribution of SiCp/2024Al composite sheet by resistance heating and sheet deep drawing deformation were analyzed. During the simulation, effect of contact resistances, temperature coefficient of resistance for electrode material and SiCp/2024Al composite on temperature distribution were integrally considered. The simulation results demonstrate that Sicp/2024Al composite sheet can be rapidly heated to 400° in 30s using resistances heating and the sheet temperature can be controlled by adjusting the current density. Physical properties of the electrode materials can significantly affect the composite sheet temperature distribution. The temperature difference between the center and the side of the sheet is proportional to the thermal conductivity of the electrode, the principal cause of which is that the heat transfers from the sheet to the electrode. SiCp/2024Al thin-wall part can be intactly manufactured at strain rate of 0.08s-1 and the sheet thickness thinning rate is limited within 20%, which corresponds well to the experimental result.

Non-Lateralised Deficits of Drawing Production in Hemispatial Neglect

ERIC Educational Resources Information Center

Smith, Alastair D.; Gilchrist, Iain D.; Butler, Stephen H.; Muir, Keith; Bone, Ian; Reeves, Ian; Harvey, Monika

2007-01-01

Spatially lateralised deficits that typically define the hemispatial neglect syndrome have been shown to co-occur with other non-lateralised deficits of attention, memory, and drawing. However even a simple graphic task involves multiple planning components, including the specification of drawing start position and drawing direction. In order to…

6. Photocopy of drawing, January 28, 1920. LOCOMOTIVE: ELEVATIONS AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. Photocopy of drawing, January 28, 1920. LOCOMOTIVE: ELEVATIONS AND TYPICAL SECTION. Watertown Arsenal Engineering Division, Drawing Number 10453. (Original: AMTL Engineering Division, Watertown). - Watertown Arsenal, Building No. 97, Wooley Avenue, Watertown, Middlesex County, MA

Children Gifted in Drawing: The Incidence of Precocious Realism

ERIC Educational Resources Information Center

Drake, Jennifer E.; Winner, Ellen

2013-01-01

Although one study has reported that 6% of children with autism spectrum disorder (ASD) have drawing talent, no study has examined the incidence of drawing talent in typical children. We asked 153 children aged 6-12 years to draw a picture of their hand. We scored the drawings for the use of detail, correct proportion, and overall contour;…

19. Photocopy of drawing, typical floor beam and stringer, Bridge ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

19. Photocopy of drawing, typical floor beam and stringer, Bridge No. 79B, Main & Washington Sts., So. Norwalk, Ct., N. Y. Division, N.Y., N.H. and H.R.R., dated April 23, 1895. Original on file with Metro North Commuter Railroad. - South Norwalk Railroad Bridge, South Main & Washington Streets, Norwalk, Fairfield County, CT

Brief Report: Human Figure Drawings by Children with Asperger's Syndrome

ERIC Educational Resources Information Center

Lim, Hui Keow; Slaughter, Virginia

2008-01-01

Twenty-nine children with Asperger's syndrome and 28 typically developing children, matched on gender, chronological age and nonverbal IQ, were asked to produce a free drawing, then requested to draw a person, a house and a tree. The drawings were scored using standardized procedures for assessing accuracy, detail and complexity. There were no…

Deep drawability of Ti/resin/Ti laminated sheet

NASA Astrophysics Data System (ADS)

Hardada, Yasunroi; Hattori, Shuji

2017-10-01

Aiming to enhance functionality of titanium cup, the formability of titanium/resin/titanium laminated sheet by deep drawing was investigated. Although pure titanium has excellent corrosion resistance, the density of titanium is higher than that of light metals, such as aluminum and magnesium. Part of the titanium cup made of resin allows for weight reduction of the cup. Furthermore, the clad cup is more likely to have heat retention and protection against vibration characteristics. In the experiment, the materials were pure titanium and polycarbonate. The initial thickness of the sheet was 0.2 to 0.5 mm in thickness. A total plate thickness of the blank was 1.0 to 1.5 mm in thickness. The blank diameter is 70 mm. The laminated sheet was constituted by interposing resin between two titanium sheets. Each sheet in stacked condition was not joined each other. In the deep drawing process, the laminated sheet was employed and a flat sheet blank was formed into a circle by a punch. For the prevention of seizure in contact area between a drawing tool and titanium, titanium blank was treated by oxide coating. By this method, the fresh and clean titanium is not in direct contact with the die during the forming due to the existence of the oxide layer. The deep drawing was carried out to investigate the formability. The laminated sheet was successfully drawn without the cracks. The section of the drawn cup was observed to examine a formability of the resin sheet. The reduction rate of the thickness was less than 10%. It was found that the titanium/resin/titanium clad cup was successfully drawn.

Children's Human Figure Drawings Do Not Measure Intellectual Ability

ERIC Educational Resources Information Center

Willcock, Emma; Imuta, Kana; Hayne, Harlene

2011-01-01

Children typically follow a well-defined series of stages as they learn to draw, but the rate at which they progress through these stages varies from child to child. Some experts have argued that these individual differences in drawing development reflect individual differences in intelligence. Here we assessed the validity of a drawing test that…

Constitutive Behavior and Deep Drawability of Three Aluminum Alloys Under Different Temperatures and Deformation Speeds

NASA Astrophysics Data System (ADS)

Panicker, Sudhy S.; Prasad, K. Sajun; Basak, Shamik; Panda, Sushanta Kumar

2017-08-01

In the present work, uniaxial tensile tests were carried out to evaluate the stress-strain response of AA2014, AA5052 and AA6082 aluminum alloys at four temperatures: 303, 423, 523 and 623 K, and three strain rates: 0.0022, 0.022 and 0.22 s-1. It was found that the Cowper-Symonds model was not a robust constitutive model, and it failed to predict the flow behavior, particularly the thermal softening at higher temperatures. Subsequently, a comparative study was made on the capability of Johnson-Cook (JC), modified Zerilli-Armstrong (m-ZA), modified Arrhenius (m-ARR) and artificial neural network (ANN) for modeling the constitutive behavior of all the three aluminum alloys under the mentioned strain rates and temperatures. Also, the improvement in formability of the materials was evaluated at an elevated temperature of 623 K in terms of cup height and maximum safe strains by conducting cylindrical cup deep drawing experiments under two different punch speeds of 4 and 400 mm/min. The cup heights increased during warm deep drawing due to thermal softening and increase in failure strains. Also, a small reduction in cup height was observed when the punch speed increased from 4 to 400 mm/min at 623 K. Hence, it was suggested to use high-speed deformation at elevated temperature to reduce both punch load and cycle time during the deep drawing process.

The interaction between short-term heat-treatment and the formability of an Al-Mg-Si alloy regarding deep drawing processes

NASA Astrophysics Data System (ADS)

Machhammer, M.; Sommitsch, C.

2016-11-01

Research conducted in recent years has shown that heat-treatable Al-Mg-Si alloys (6xxx) have great potential concerning the design of lightweight car bodies. Compared to conventional deep drawing steels the field of application is limited by a lower formability. In order to minimize the disadvantage of a lower drawability a short-term heat-treatment (SHT) can be applied before the forming process. The SHT, conducted in selected areas on the initial blank, leads to a local reduction of strength aiming at the decrease of critical stress during the deep drawing process. For the successful procedure of the SHT a solid knowledge about the crucial process parameters such as the design of the SHT layout, the SHT process time and the maximum SHT temperature are urgently required. It also should be noted that the storage time between the SHT and the forming processes affects the mechanical properties of the SHT area. In this paper, the effect of diverse SHT process parameters and various storage time-frames on the major and minor strain situation of a deep drawn part is discussed by the evaluation of the forming limit diagram. For the purpose of achieving short heating times and a homogenous temperature distribution a one side contact heating tool has been used for the heat treatment in this study.

Development of a Hybrid Deep Drawing Process to Reduce Springback of AHSS

NASA Astrophysics Data System (ADS)

Boskovic, Vladimir; Sommitsch, Christoph; Kicin, Mustafa

2017-09-01

In future, the steel manufacturers will strive for the implementation of Advanced High Strength Steels (AHSS) in the automotive industry to reduce mass and improve structural performance. A key challenge is the definition of optimal and cost effective processes as well as solutions to introduce complex steel products in cold forming. However, the application of these AHSS often leads to formability problems such as springback. One promising approach in order to minimize springback is the relaxation of stress through the targeted heating of materials in the radius area after the deep drawing process. In this study, experiments are conducted on a Dual Phase (DP) and TWining Induced Plasticity (TWIP) steel for the process feasibility study. This work analyses the influence of various heat treatment temperatures on the springback reduction of deep drawn AHSS.

Dynamic analysis of six-bar mechanical press for deep drawing

NASA Astrophysics Data System (ADS)

Mitsi, S.; Tsiafis, I.; Bouzakis, K. D.

2017-02-01

This paper analyzes the dynamical behavior of a six-bar linkage used in mechanical presses for metal forming such as deep drawing. In the under study mechanism, a four-bar linkage is connected to a slider through an articulated binary link. The motion of the six-bar linkage is studied by kinematic analysis developing an analytical method. Furthermore, using an iterative method and d’ Alembert’s principle, the joint forces and drive moment are evaluated considering joint frictions. The simulation results obtained with a MATLAB program are validated by comparing the theoretical values of the input moment with the ones obtained from the conservation of energy law.

Effect of Hydraulic Pressure on Warm Hydro Mechanical Deep Drawing of Magnesium Alloy Sheet

NASA Astrophysics Data System (ADS)

Liu, Wei; Wu, Linzhi; Yuan, Shijian

The uniaxial tensile test and hydraulic bulging test of AZ31 magnesium alloy sheets were applied to study the influence of temperature on the material properties and obtain the forming limit curves at different temperatures. Numerical simulations of warm hydro mechanical deep drawing were carried out to investigate the effect of hydraulic pressure on the formability of a cylindrical cup, and the simplified hydraulic pressure profiles were used to simulate the loading procedure of hydraulic pressure. The optimal hydraulic pressure at different temperatures were given and verified by experimental studies at temperature 100°C and 170V.

Source and transport of human enteric viruses in deep municipal water supply wells

USGS Publications Warehouse

Bradbury, Kenneth R.; Borchardt, Mark A.; Gotkowitz, Madeline; Spencer, Susan K.; Zhu, Jun; Hunt, Randall J.

2013-01-01

Until recently, few water utilities or researchers were aware of possible virus presence in deep aquifers and wells. During 2008 and 2009 we collected a time series of virus samples from six deep municipal water-supply wells. The wells range in depth from approximately 220 to 300 m and draw water from a sandstone aquifer. Three of these wells draw water from beneath a regional aquitard, and three draw water from both above and below the aquitard. We also sampled a local lake and untreated sewage as potential virus sources. Viruses were detected up to 61% of the time in each well sampled, and many groundwater samples were positive for virus infectivity. Lake samples contained viruses over 75% of the time. Virus concentrations and serotypes observed varied markedly with time in all samples. Sewage samples were all extremely high in virus concentration. Virus serotypes detected in sewage and groundwater were temporally correlated, suggesting very rapid virus transport, on the order of weeks, from the source(s) to wells. Adenovirus and enterovirus levels in the wells were associated with precipitation events. The most likely source of the viruses in the wells was leakage of untreated sewage from sanitary sewer pipes.

An incremental analysis of a deep drawing steel’s material behaviour undergoing the predeformation using drawbeads

NASA Astrophysics Data System (ADS)

Schmid, H.; Suttner, S.; Merklein, M.

2017-09-01

Nowadays lightweight design in metal forming processes leads to complex deep drawing geometries, which can cause multiple damages. Therefore, drawbeads are one way to regulate and control material flow during the forming process. Not only in research, but also in industrial practice, it could be determined that material is work hardened passing drawbead geometries. It particularly means when material is pre-deformed with tensile and alternating bending loads. This incident also gives the opportunity to utilize it in a reasonable way if examined properly. To investigate these findings, a process oriented and comprehensive analysis of the material behaviour during these forming operations is needed. In this paper, sheet metal strips are linearly drawn through a drawbead and stopped after passing the drawbead. Within this forming operation, the material undergoes non-linear straining before reaching the in-plane position again. Here, the process will be stopped to investigate a permanent strengthening local along the sheet thickness. Therefore, microhardness measurements are realized before and after passing the drawbead. Because of its common use and its wide known material data, a deep drawing steel DC will be used for these studies. Additionally, the strategy is applied to advanced high strength steel.

DEEP SPACE: High Resolution VR Platform for Multi-user Interactive Narratives

NASA Astrophysics Data System (ADS)

Kuka, Daniela; Elias, Oliver; Martins, Ronald; Lindinger, Christopher; Pramböck, Andreas; Jalsovec, Andreas; Maresch, Pascal; Hörtner, Horst; Brandl, Peter

DEEP SPACE is a large-scale platform for interactive, stereoscopic and high resolution content. The spatial and the system design of DEEP SPACE are facing constraints of CAVETM-like systems in respect to multi-user interactive storytelling. To be used as research platform and as public exhibition space for many people, DEEP SPACE is capable to process interactive, stereoscopic applications on two projection walls with a size of 16 by 9 meters and a resolution of four times 1080p (4K) each. The processed applications are ranging from Virtual Reality (VR)-environments to 3D-movies to computationally intensive 2D-productions. In this paper, we are describing DEEP SPACE as an experimental VR platform for multi-user interactive storytelling. We are focusing on the system design relevant for the platform, including the integration of the Apple iPod Touch technology as VR control, and a special case study that is demonstrating the research efforts in the field of multi-user interactive storytelling. The described case study, entitled "Papyrate's Island", provides a prototypical scenario of how physical drawings may impact on digital narratives. In this special case, DEEP SPACE helps us to explore the hypothesis that drawing, a primordial human creative skill, gives us access to entirely new creative possibilities in the domain of interactive storytelling.

Understanding Molecular Genetics through a Drawing-Based Activity

ERIC Educational Resources Information Center

Rotbain, Yosi; Marbach-Ad, Gili; Stavy, Ruth

2005-01-01

The activity uses drawings typically found in textbooks, engaging students in physical and mental activities such as drawing, painting and figure completion--as well as finding missing words and answering guiding questions. The activity deals with three topics: the structure of DNA, DNA replication and protein synthesis. In this study we…

[The importance of drawing in adolescence].

PubMed

Titia Rizzi, Alice

Teenagers like to draw. A drawing is a fundamental object of creativity in the process of re-construction and change typical of this period. However, theoretical approaches often consider that the evolution of the stages of drawing come to an end in adolescence. It is important to consider the practical and clinical benefit of drawing and to develop expression-based activities which can be carried out with this population. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Enhancing Deep Learning: Lessons from the Introduction of Learning Teams in Management Education in France

ERIC Educational Resources Information Center

Borredon, Liz; Deffayet, Sylvie; Baker, Ann C.; Kolb, David

2011-01-01

Drawing from the reflective teaching and learning practices recommended in influential publications on learning styles, experiential learning, deep learning, and dialogue, the authors tested the concept of "learning teams" in the framework of a leadership program implemented for the first time in a top French management school…

23. Photograph of a line drawing in the possession of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

23. Photograph of a line drawing in the possession of the Engineer's Office of the Marion, IL Veterans Administration Medical Center. TYPICAL LOBBY DETAILS; DRAWING 1-21R, DATED SEPTEMBER 4, 1940. (8 x 10 negative) - Veterans Administration Medical Center, Building No. 1, Old State Route 13 West, Marion, Williamson County, IL

Proximal Hamstring Tendinopathy: Clinical Aspects of Assessment and Management.

PubMed

Goom, Thomas S H; Malliaras, Peter; Reiman, Michael P; Purdam, Craig R

2016-06-01

Synopsis Proximal hamstring tendinopathy (PHT) typically manifests as deep buttock pain at the hamstring common origin. Both athletic and nonathletic populations are affected by PHT. Pain and dysfunction are often long-standing and limit sporting and daily functions. There is limited evidence regarding diagnosis, assessment, and management; for example, there are no randomized controlled trials investigating rehabilitation of PHT. Some of the principles of management established in, for example, Achilles and patellar tendinopathy would appear to apply to PHT but are not as well documented. This narrative review and commentary will highlight clinical aspects of assessment and management of PHT, drawing on the available evidence and current principles of managing painful tendinopathy. The management outline presented aims to guide clinicians as well as future research. J Orthop Sports Phys Ther 2016;46(6):483-493. Epub 15 Apr 2016. doi:10.2519/jospt.2016.5986.

The Effects of Color Cues on Typically Developing Preschoolers' Speed of Locating a Target Line Drawing: Implications for Augmentative and Alternative Communication Display Design

ERIC Educational Resources Information Center

Thistle, Jennifer J.; Wilkinson, Krista

2009-01-01

Purpose: This research examined how the presence of color in relation to a target within an augmentative and alternative communication array influenced the speed with which typically developing preschoolers located a target line drawing. Method: Fifteen children over the age of 4 years (from 4;2 [years;months] to 5;4) and 15 children under the age…

Semantic Typicality Effects in Acquired Dyslexia: Evidence for Semantic Impairment in Deep Dyslexia.

PubMed

Riley, Ellyn A; Thompson, Cynthia K

2010-06-01

BACKGROUND: Acquired deep dyslexia is characterized by impairment in grapheme-phoneme conversion and production of semantic errors in oral reading. Several theories have attempted to explain the production of semantic errors in deep dyslexia, some proposing that they arise from impairments in both grapheme-phoneme and lexical-semantic processing, and others proposing that such errors stem from a deficit in phonological production. Whereas both views have gained some acceptance, the limited evidence available does not clearly eliminate the possibility that semantic errors arise from a lexical-semantic input processing deficit. AIMS: To investigate semantic processing in deep dyslexia, this study examined the typicality effect in deep dyslexic individuals, phonological dyslexic individuals, and controls using an online category verification paradigm. This task requires explicit semantic access without speech production, focusing observation on semantic processing from written or spoken input. METHODS #ENTITYSTARTX00026; PROCEDURES: To examine the locus of semantic impairment, the task was administered in visual and auditory modalities with reaction time as the primary dependent measure. Nine controls, six phonological dyslexic participants, and five deep dyslexic participants completed the study. OUTCOMES #ENTITYSTARTX00026; RESULTS: Controls and phonological dyslexic participants demonstrated a typicality effect in both modalities, while deep dyslexic participants did not demonstrate a typicality effect in either modality. CONCLUSIONS: These findings suggest that deep dyslexia is associated with a semantic processing deficit. Although this does not rule out the possibility of concomitant deficits in other modules of lexical-semantic processing, this finding suggests a direction for treatment of deep dyslexia focused on semantic processing.

Prediction of thinning of the sheet metal in the program AutoForm and its experimental verification

NASA Astrophysics Data System (ADS)

Fedorko, M.; Urbánek, M.; Rund, M.

2017-02-01

The manufacture of press-formed parts often involves deep-drawing operations. Deep drawing, however, can be deemed an industrial branch in its own right. Today, many experimental as well as numerical methods are available for designing and optimizing deep drawing operations. The best option, however, is to combine both approaches. The present paper describes one such investigation. Here, measurements and numerical simulation were used for mapping the impact of anisotropy on thickness variation in a spherical-shaped drawn part of DC01 steel. Variation in sheet thickness was measured on spherical-shaped drawn parts of various geometries by means of two cameras, and evaluated with digital image correlation using the ARAMIS software from the company GOM. The forming experiment was carried out on an INOVA 200 kN servohydraulic testing machine in which the force vs. piston displacement curve was recorded. The same experiment was then numerically simulated and analyzed using the AUTOFORM software. Various parameters were monitored, such as thinning, strain magnitude, formability, and others. For the purpose of this simulation, a series of mechanical tests was conducted to obtain descriptions of the experimental material of 1.5 mm thickness. A material model was constructed from the tests data involving the work-hardening curve, the impact of anisotropy, and the forming limit diagram. Specifically, these tests included tensile tests, the Nakajima test, and the stacked test, which were carried out to determine materials data for the model. The actual sheet thickness was measured on a sectioned spherical-shaped drawn part using a NIKON optical microscope. The variations in thickness along defined lines on the sectioned drawn part were compared with the numerical simulations data using digital image correlation. The above-described experimental programme is suitable for calibrating a material model for any computational software and can correctly solve deep-drawing problems.

Combining the pressure effect with local heat treatment for improving the sheet metal forming process

NASA Astrophysics Data System (ADS)

Palumbo, G.; Piccininni, A.; Guglielmi, P.; Sorgente, D.; Tricarico, L.

2016-08-01

The present work deals with the advantages in the Hydromechanical Deep Drawing (HDD) when AA5754 Tailored Heat Treated Blanks (THTBs) are adopted. It is well known that the creation of a suitable distribution of material properties increases the process performance. When non heat-treatable alloys are considered, the THTB approach can be successfully applied to increase the Limit Drawing Ratio (LDR) by changing the peripheral zone into the annealed state starting from a cold-worked blank. If this approach is combined with the advantages of a counterpressure, even more remarkable improvements can be achieved. Due to the large number of involved parameters, the optimized design of both the local treatment and the pressure profile were investigated coupling an axial symmetric Finite Element model with the integration platform modeFRONTIER. Results confirmed the possibility of increasing the LDR from 2.0 (Deep Drawing using a blank in the annealed state) up to about 3.0 if combining the adoption of a THTB with the optimal pressure profile.

SPECIAL ACTIVITIES SUPPLEMENTAL TO AND RELATED TO THE ART PROGRAM AT DEEP RIVER OUTDOOR EDUCATION CENTER.

ERIC Educational Resources Information Center

Gary City Public School System, IN.

A CURRICULUM GUIDE DEALING WITH VARIOUS SUBJECT AREAS WAS PREPARED FOR POSSIBLE STUDY ACTIVITIES THAT WOULD USE THE LEARNING RESOURCES AVAILABLE AT THE DEEP RIVER OUTDOOR EDUCATION CENTER IN GARY, INDIANA. ACTIVITIES GUIDES ARE PRESENTED FOR (1) ART ACTITIVIES RELATED TO DESIGN, COLOR, LANDSCAPE REPRESENTATION, PAPER CONSTRUCTION, DRAWING, PRINT…

43. Portion of Construction Drawing 2042F17, entitled 100 ft. Roundhouse, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

43. Portion of Construction Drawing 2042-F-17, entitled 100 ft. Roundhouse, Plan and Section of Typical Bay. Shown is a section showing soil bearing foundation and plan. (Original drawing, in the possession of Wyre Dick and Company, Livingston, New Jersey.) - Central Railroad of New Jersey, Engine Terminal, Jersey City, Hudson County, NJ

Beyond the Pencil

ERIC Educational Resources Information Center

Sands, Ian

2012-01-01

To the general public, the topic of art education conjures up images of pencil drawings and tempera paint. If asked what a student might learn in an art class, a typical response might be that they will be taught how to draw and paint. This interpretation isn't totally incorrect, as drawing and painting are activities preformed in most artrooms.…

The Attitudes and Practices that Shape Children's Drawing Experience at Home and at School

ERIC Educational Resources Information Center

Burkitt, Esther; Jolley, Richard; Rose, Sarah

2010-01-01

Concept: Few empirical studies have investigated the influence of teachers, parents and children on children's drawing experience. The current study aims to examine the attitudes and practices of these three key players that shape children's drawing experience. Method: A survey methodology was used, as typically found in previous research in this…

33. Elevation of Doors / Typical Cement Toilet Partitions / ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

33. Elevation of Doors / Typical Cement Toilet Partitions / Typical Cement Shower Bath Partitions / Typical Marble Shower Bath Partitions / Dispensary Cupboard Supply Room Cupboard Similar / Section / Kitchen Cupboard and Sink / Screened Porch Cupboard (drawing 10) - Whittier State School, Hospital & Receiving Building, 11850 East Whittier Boulevard, Whittier, Los Angeles County, CA

3. Photograph of a line drawing. SHEET 3, FLOOR PLAN, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. Photograph of a line drawing. SHEET 3, FLOOR PLAN, DETAILS OF S EAST AND S WEST CORNERS, TYPICAL DETAIL AT COLUMN U-49 and U-25, TYPICAL SECTION THRU R. R. TRACK IN S WEST CORNER, SECTION THRU PIPE PIT AT COLUMN #P-1; 9-16-1940. Assembly Building for Tank Plant for the Chrysler Corporation, Macomb County, Michigan. Delineator: H. C. B. - Detroit Arsenal, 6501 East Eleven Mile Road, Warren, Macomb County, MI

15. Photocopy of original drawing by Cass Gilbert, 1918 (original ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. Photocopy of original drawing by Cass Gilbert, 1918 (original in possession of NYC Economic Development Corp.) TYPICAL DETAILS-PIERS 2, 3, AND 4 - Brooklyn Army Supply Base, Pier 2, Brooklyn, Kings County, NY

Formability analysis of austenitic stainless steel-304 under warm conditions

NASA Astrophysics Data System (ADS)

Lade, Jayahari; Singh, Swadesh Kumar; Banoth, Balu Naik; Gupta, Amit Kumar

2013-12-01

A warm deep drawing process of austenitic stainless steel-304 (ASS-304) of circular blanks with coupled ther mal analysis is studied in this article. 65 mm blanks were deep drawn at different temperatures and thickness distribution is experimentally measured after cutting the drawn component into two halves. The process is simulated using explicit fin ite element code LS-DYNA. A Barlat 3 parameter model is used in the simulation, as the material is anisotropic up to 30 0°C. Material properties for the simulation are determined at different temperatures using a 5 T UTM coupled with a furn ace. In this analysis constant punch speed and variable blank holder force (BHF) is applied to draw cups without wrinkle.

Study of wear performance of deep drawing tooling

NASA Astrophysics Data System (ADS)

Naranje, Vishal G.; Karthikeyan, Ram; Nair, Vipin

2017-09-01

One of the most common challenges for many of the mechanical engineers and also in the field of materials science is the issue of occurrences of wear of the material parts which is used in certain applications that involves such surface interactions. In this paper, wear behaviour of particular grade High Carbon High Chromium Steel and many most famously D2, H13, O1 known as the Viking steel has been studied, evaluated and analyzed under certain processing parameters such as speed, load, track diameter and time required for deep drawing process to know it’s the wear rate and coefficient of friction. Also, the significance of the processing parameters which is used for wear testing analysis is also examined.

The effects of color cues on typically developing preschoolers' speed of locating a target line drawing: implications for augmentative and alternative communication display design.

PubMed

Thistle, Jennifer J; Wilkinson, Krista

2009-08-01

This research examined how the presence of color in relation to a target within an augmentative and alternative communication array influenced the speed with which typically developing preschoolers located a target line drawing. Fifteen children over the age of 4 years (from 4;2 [years;months] to 5;4) and 15 children under the age of 4 years (2;10-3;11) participated. Participants were asked to find a target line drawing of foods (e.g., banana and tomato) among an array of 12. The reaction time of locating the target was measured across 4 conditions in which the foreground color and the background color of the line drawing were manipulated. For all participants, line drawings featuring foreground color provided greater advantages in the speed of locating the target compared with drawings featuring only background color. Younger participants demonstrated faster reaction times when color was limited to the foreground. Clinicians should consider incorporating color in the foreground of the line drawing when constructing visual displays. Targets that contain only background color but no foreground color appear to have a negative effect on the speed with which younger children can locate a target. Further research is needed to determine the effects in children with disabilities.

Effects of cooking method, cooking oil, and food type on aldehyde emissions in cooking oil fumes.

PubMed

Peng, Chiung-Yu; Lan, Cheng-Hang; Lin, Pei-Chen; Kuo, Yi-Chun

2017-02-15

Cooking oil fumes (COFs) contain a mixture of chemicals. Of all chemicals, aldehydes draw a great attention since several of them are considered carcinogenic and formation of long-chain aldehydes is related to fatty acids in cooking oils. The objectives of this research were to compare aldehyde compositions and concentrations in COFs produced by different cooking oils, cooking methods, and food types and to suggest better cooking practices. This study compared aldehydes in COFs produced using four cooking oils (palm oil, rapeseed oil, sunflower oil, and soybean oil), three cooking methods (stir frying, pan frying, and deep frying), and two foods (potato and pork loin) in a typical kitchen. Results showed the highest total aldehyde emissions in cooking methods were produced by deep frying, followed by pan frying then by stir frying. Sunflower oil had the highest emissions of total aldehydes, regardless of cooking method and food type whereas rapeseed oil and palm oil had relatively lower emissions. This study suggests that using gentle cooking methods (e.g., stir frying) and using oils low in unsaturated fatty acids (e.g., palm oil or rapeseed oil) can reduce the production of aldehydes in COFs, especially long-chain aldehydes such as hexanal and t,t-2,4-DDE. Copyright © 2016 Elsevier B.V. All rights reserved.

Generativity and imagination in autism spectrum disorder: evidence from individual differences in children's impossible entity drawings.

PubMed

Low, Jason; Goddard, Elizabeth; Melser, Joseph

2009-06-01

This study examined the cognitive underpinnings of spontaneous imagination in autism spectrum disorder (ASD) by way of individual differences. Children with ASD (N = 27) and matched typically developing (TD) children were administered Karmiloff-Smith's (1990) imaginative drawing task, along with measures that tapped specific executive functions (generativity, visuospatial planning, and central coherence processing style) and false belief theory of mind (ToM) understanding. The ASD group drawings displayed deficits in imaginative content and a piecemeal pictorial style. ASD participants also showed group deficits in generativity, planning and ToM, and exhibited weak coherence. Individual differences in generativity were related to imaginative drawing content in the ASD group, and the association was mediated through planning ability. Variations in weak coherence were separately related to a piecemeal drawing style in the ASD group. Variations in generativity were also linked with imaginative drawing content in the TD group; the connection unfolded when it received pooled variance from receptive language ability, and thereupon mediated through false belief reasoning to cue imaginative content. Results are discussed in terms of how generativity plays a broad and important role for imagination in ASD and typical development, albeit in different ways.

50. Photocopy of drawing (Source unknown, 1928) Rapid Blue Print ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

50. Photocopy of drawing (Source unknown, 1928) Rapid Blue Print Co., Los Angleles, CA, Photographer, Date unknown ENTRANCE AND TYPICAL BAY ON FLOWER STREET - Richfield Oil Building, 555 South Flower Street, Los Angeles, Los Angeles County, CA

Historic American Buildings Survey PHOTOCOPY OF MEASURED DRAWING BY DIETER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Historic American Buildings Survey PHOTOCOPY OF MEASURED DRAWING BY DIETER SENGLER, 1964 ELEVATION, PLAN AND SECTION OF TYPICAL BAY SHOWING SECOND, THIRD, FIFTEENTH AND SIXTEENTH FLOORS - Monadnock Block, 53 West Jackson Boulevard, Chicago, Cook County, IL

Imitation, Inspiration, and Creation: Cognitive Process of Creative Drawing by Copying Others' Artworks.

PubMed

Okada, Takeshi; Ishibashi, Kentaro

2017-09-01

To investigate the cognitive processes underlying creative inspiration, we tested the extent to which viewing or copying prior examples impacted creative output in art. In Experiment 1, undergraduates made drawings under three conditions: (a) copying an artist's drawing, then producing an original drawing; (b) producing an original drawing without having seen another's work; and (c) copying another artist's work, then reproducing that artist's style independently. We discovered that through copying unfamiliar abstract drawings, participants were able to produce creative drawings qualitatively different from the model drawings. Process analyses suggested that participants' cognitive constraints became relaxed, and new perspectives were formed from copying another's artwork. Experiment 2 showed that exposure to styles of artwork considered unfamiliar facilitated creativity in drawing, while styles considered familiar did not do so. Experiment 3 showed that both copying and thoroughly viewing artwork executed using an unfamiliar style facilitated creativity in drawing, whereas merely thinking about alternative styles of artistic representation did not do so. These experiments revealed that deep encounters with unfamiliar artworks-whether through copying or prolonged observation-change people's cognitive representations of the act of drawing to produce novel artwork. Copyright © 2016 Cognitive Science Society, Inc.

Archaeological Investigation at El Dorado Lake, Butler County, Kansas. Phase III.

DTIC Science & Technology

1982-01-01

time during which deep disturbance predominated is estimated to be roughly equal to the number of years surface and shallow techniques have been... during excavation, but sampled. Measurements are therefore estimated from scale drawings of feature plans. However, the drawing of Feature 3 consists... roasting features with the limestones and/or deposited as refuse during separate disposal episodes. Fauna and Flora A total of 862 bones and bone

10. Photocopy of 1940 architectural drawing titled: 'Alterations & Additions ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. Photocopy of 1940 architectural drawing titled: 'Alterations & Additions to (4290) Hosital, Schedules' includes 'Typical Door Elevations' and 'Metal Door Frames.' Dated 4-12-40. HABS film is a high-contrast 8x10' negative made from original drawing in the collection of Housing and Engineering Services, Fort Lewis, WA. - Fort Lewis, Post Hospital, Near Ninth Division Drive & Idaho Avenue, DuPont, Pierce County, WA

The Simpsons: Public Choice in the Tradition of Swift and Orwell

ERIC Educational Resources Information Center

Considine, John

2006-01-01

The author disagrees with Homer Simpson who claims that "...cartoons don't have any deep meaning. They're just stupid drawings that give you a cheap laugh." He argues that The Simpsons have a deep meaning in the same way as the works of Jonathan Swift and George Orwell. The message in The Simpsons, Swift, and Orwell is that those in charge do not…

Photographic copy of drawing by Modjeski and Masters, Engineers of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of drawing by Modjeski and Masters, Engineers of the proposed Huey P. Long Bridge Widening. Original drawing located in the office of Modjeski and Masters, Consulting Engineers at 1055 St. Charles Avenue, New Orleans, LA. 70130. MAY 13, 2005 DRAWING OF THE PROPOSED HUEY P. LONG BRIDGE WIDENING, U.S. 90, MAIN BRIDGE SUBSTRUCTURE, SHOWING STRUCTURE PLAN AND ELEVATION -2 AND TYPICAL SECTION THROUGH BRIDGE. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

DEVELOPMENT OF IMPROVED FABRICATION METHODS, PROCESS AND TECHNIQUES FOR PRODUCING TYPICAL AIRCRAFT SHAPES FROM BERYLLIUM. Interim Technical Documentary Progress Report for the Period ending October 31, 1962

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jenkins, R.G.; Siergiej, J.M.

1962-12-28

In a program to develop a complete manufacturing process for ihe production of beryllium channels, techniques are being sought for drawing to obtain a flnal product meeting specifications more rigorous than are obtainable by direct extrusion. Progress in designing and procuring the special tooling required to draw complex shapes at elevated temperature is described, and the flrst set of draw dies is evaluated with respect to design and quality. Three experimental draw attempts have been made on U-channels, in addition to draw tests on flats. (auth)

This photographic copy of an engineering drawing shows floor plans, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

This photographic copy of an engineering drawing shows floor plans, sections and elevations of Building E-86, with details typical of the steel frame and "Transite" building construction at JPL Edwards Facility. California Institute of Technology, Jet Propulsion Laboratory, Facilities Engineering and Construction Office: "Casting & Curing, Building E-86, Floor Plan, Elevations & Section," drawing no. E86/6, 25 February 1977. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering: engineering drawings of structures at JPL Edwards Facility. Drawings on file at JPL Plant Engineering, Pasadena, California - Jet Propulsion Laboratory Edwards Facility, Casting & Curing Building, Edwards Air Force Base, Boron, Kern County, CA

Anisotropic yield function capable of predicting eight ears

NASA Astrophysics Data System (ADS)

Yoon, J. H.; Cazacu, O.

2011-08-01

Deep drawing of a cylindrical cup from a rolled sheet is one of the typical forming operations where the effect of this anisotropy is most evident. Indeed, it is well documented in the literature that the number of ears and the shape of the earing pattern correlate with the r-values profile. For the strongly textured aluminum alloy AA 5042 (Numisheet Benchmark 2011), the experimental r-value distribution has two minima between the rolling and transverse direction data provided for this show that the r-value along the transverse direction (TD) is five times larger than the value corresponding to the rolling direction. Therefore, it is expected that there are more that the earing profile has more than four ears. The main objective of this paper is to assess whether a new form of CPB06ex2 yield function (Plunkett et al. (2008)) tailored for metals with no tension-compression asymmetry is capable of predicting more than four ears for this material.

44. Photocopy of drawing no. C3737, dated 24 October 1917, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

44. Photocopy of drawing no. C-3737, dated 24 October 1917, entitled "New York Municipal Railway Corporation, Coney Island Terminal, Details of Concrete Track Deck and Platforms, Stillwell Avenue Station, Working Drawing," showing typical reinforced concrete encasement of iron and steel girders and columns. Original on file, plan archives of MTA New York City Transit, New York. - Stillwell Avenue Station, Intersection of Stillwell & Surf Avenues, Brooklyn, Kings County, NY

Mechanical Behaviour of Conventional Materials at Experimental Conditions of Deep Drawing Technological Process

NASA Astrophysics Data System (ADS)

Nikolov, N.; Pashkouleva, D.; Kavardzhikov, V.

2012-09-01

The paper deals with experimental investigations on the mechanical behaviour of body-centred-cubic (BCC) and face-centred-cubic (FCC)-conventionally structured sheet metalic-metalic materials under stress-strain conditions of a deep drawing process determined by a coefficient close to the limiting one for Steel 08 and punch diameter of 50 mm. The mechanical characteristics of the investigated materials are identified by one-dimensional tension tests. The materials' responses, as results of identical loading conditions, are described by the change of blank sizes and characteristics of the forming processes. The chosen deformation path ensures obtaining a qualitative steel piece and leads to failures of aluminium and brass blanks. The reported results could be useful for investigations and predictions of the mechanical responses of such type metallic structures applying microscopic instrumented observations and numerical simulations.

Deep level transient spectroscopy (DLTS) on colloidal-synthesized nanocrystal solids.

PubMed

Bozyigit, Deniz; Jakob, Michael; Yarema, Olesya; Wood, Vanessa

2013-04-24

We demonstrate current-based, deep level transient spectroscopy (DLTS) on semiconductor nanocrystal solids to obtain quantitative information on deep-lying trap states, which play an important role in the electronic transport properties of these novel solids and impact optoelectronic device performance. Here, we apply this purely electrical measurement to an ethanedithiol-treated, PbS nanocrystal solid and find a deep trap with an activation energy of 0.40 eV and a density of NT = 1.7 × 10(17) cm(-3). We use these findings to draw and interpret band structure models to gain insight into charge transport in PbS nanocrystal solids and the operation of PbS nanocrystal-based solar cells.

133. Photocopy of original construction drawing, dated 21 March 1940 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

133. Photocopy of original construction drawing, dated 21 March 1940 (Original print in the possession of U.S. Army Corps of Engineers, Portland District, Portland, OR.) (P-40-8) TYPICAL PIER ELEVATION. - Bonneville Project, Powerhouse No.1, Spanning Bradford Slough, from Bradford Island, Bonneville, Multnomah County, OR

Training for Fostering Knowledge Co-Construction from Collaborative Inference-Drawing

ERIC Educational Resources Information Center

Deiglmayr, Anne; Spada, Hans

2011-01-01

Groups typically have difficulties drawing inferences that integrate individuals' unique information (collaborative inferences) and thus yield a true assembly bonus. An experiment with 36 dyads of university-level students in four training conditions showed, particularly in untrained dyads, that collaborative inferences were less likely to be…

Genetics Home Reference: prothrombin thrombophilia

MedlinePlus

... risk for a type of clot called a deep venous thrombosis , which typically occurs in the deep veins of the legs. Affected people also have ... 3 links) GeneReview: Prothrombin-Related Thrombophilia MedlinePlus Encyclopedia: Deep venous ... Encyclopedia: Pulmonary embolus General Information ...

Melted Ice

NASA Image and Video Library

2009-06-24

These drawings depict explanations for the source of intense heat that has been measured coming from Enceladus south polar region. These models predict that water could exist in a deep layer as an ocean or sea and also near the surface.

Photographic copy of drawing by Modjeski and Masters, Engineers of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of drawing by Modjeski and Masters, Engineers of the proposed Huey P. Long Bridge Widening. Original drawing located in the office of Modjeski and Masters, Consulting Engineers at 1055 St. Charles Avenue, New Orleans, LA. 70130. MAY 13, 2005 DRAWING OF THE PROPOSED HUEY P. LONG BRIDGE WIDENING, U.S. 90, MAIN BRIDGE SUPERSTRUCTURE, SHOWING STRUCTURE PLAN AND ELEVATION -2 AND TYPICAL SECTION THROUGH BRIDGE AT PIER I AND II. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

38. DETAIL OF CYLINDER LEVELING SYSTEM SHOWING TYPICAL UPPER AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

38. DETAIL OF CYLINDER LEVELING SYSTEM SHOWING TYPICAL UPPER AND LOWER PULLEY BRACKET. F.C. TORKELSON DRAWING NUMBER 842-ARVFS-701-S-8. INEL INDEX CODE - Idaho National Engineering Laboratory, Advanced Reentry Vehicle Fusing System, Scoville, Butte County, ID

Deep Drawing Simulations With Different Polycrystalline Models

NASA Astrophysics Data System (ADS)

Duchêne, Laurent; de Montleau, Pierre; Bouvier, Salima; Habraken, Anne Marie

2004-06-01

The goal of this research is to study the anisotropic material behavior during forming processes, represented by both complex yield loci and kinematic-isotropic hardening models. A first part of this paper describes the main concepts of the `Stress-strain interpolation' model that has been implemented in the non-linear finite element code Lagamine. This model consists of a local description of the yield locus based on the texture of the material through the full constraints Taylor's model. The texture evolution due to plastic deformations is computed throughout the FEM simulations. This `local yield locus' approach was initially linked to the classical isotropic Swift hardening law. Recently, a more complex hardening model was implemented: the physically-based microstructural model of Teodosiu. It takes into account intergranular heterogeneity due to the evolution of dislocation structures, that affects isotropic and kinematic hardening. The influence of the hardening model is compared to the influence of the texture evolution thanks to deep drawing simulations.

Analysis of Square Cup Deep-Drawing Test of Pure Titanium

NASA Astrophysics Data System (ADS)

Ogawa, Takaki; Ma, Ninshu; Ueyama, Minoru; Harada, Yasunori

2016-08-01

The prediction of formability of titunium is more difficult than steels since its strong anisotropy. If computer simulation can estimate the formability of titanium, we can select the optimal forming conditions. The purpose of this study was to acquire knowledge for the formability prediction by the computer simulation of the square cup deep-drawing of pure titanium. In this paper, the results of FEM analsis of pure titanium were compared with the experimental results to examine the analysis validity. We analyzed the formability of deepdrawing square cup of titanium by the FEM using solid elements. Compared the analysis results with the experimental results such as the forming shape, the punch load, and the thickness, the validity was confirmed. Further, through analyzing the change of the thickness around the forming corner, it was confirmed that the thickness increased to its maximum value during forming process at the stroke of 35mm more than the maximum stroke.

Developing Deep Learning Applications for Life Science and Pharma Industry.

PubMed

Siegismund, Daniel; Tolkachev, Vasily; Heyse, Stephan; Sick, Beate; Duerr, Oliver; Steigele, Stephan

2018-06-01

Deep Learning has boosted artificial intelligence over the past 5 years and is seen now as one of the major technological innovation areas, predicted to replace lots of repetitive, but complex tasks of human labor within the next decade. It is also expected to be 'game changing' for research activities in pharma and life sciences, where large sets of similar yet complex data samples are systematically analyzed. Deep learning is currently conquering formerly expert domains especially in areas requiring perception, previously not amenable to standard machine learning. A typical example is the automated analysis of images which are typically produced en-masse in many domains, e. g., in high-content screening or digital pathology. Deep learning enables to create competitive applications in so-far defined core domains of 'human intelligence'. Applications of artificial intelligence have been enabled in recent years by (i) the massive availability of data samples, collected in pharma driven drug programs (='big data') as well as (ii) deep learning algorithmic advancements and (iii) increase in compute power. Such applications are based on software frameworks with specific strengths and weaknesses. Here, we introduce typical applications and underlying frameworks for deep learning with a set of practical criteria for developing production ready solutions in life science and pharma research. Based on our own experience in successfully developing deep learning applications we provide suggestions and a baseline for selecting the most suited frameworks for a future-proof and cost-effective development. © Georg Thieme Verlag KG Stuttgart · New York.

Comparing the drawings of children with attention deficit hyperactivity disorder with normal children.

PubMed

Haghighi, Mahnaz; Khaterizadeh, Maedeh; Chalbianloo, Gholamreza; Toobaei, Sholeh; Ghanizadeh, Ahmad

2014-10-01

Attention deficit hyperactivity disorder (ADHD) is the most common behavioral problem during childhood and in school-aged children. Various projection drawings have been designed for assessing children's personality and psychological disorders including the tests of draw a person (DAP) and draw a family (DAF). We aimed to compare the differences between typically developing children and children with ADHD using these tests. In this case-control study, all the 9-10 year-old boy students studying at the third and fourth grades were enrolled from schools in the 2nd educational district of Shiraz, south of Iran. Eighty students were then selected and enrolled into the ADHD group and the control group. The Diagnostic and Statistical Manual of Mental Disorders, 4th edition- text Revised (DSM-IV-TR), and the Child Symptoms Inventory were used to diagnose the children with ADHD. We evaluated and analyzed impulsiveness, non-impulsiveness, emotional problems and incompatibility indices in the DAP and DAF tests in each group. A significant difference was found in the indices of incompatibility and emotional problems, impulsiveness, non-impulsiveness and DAF between typically developing children and those with ADHD. The mean (±SD) total scores of the above mentioned indices in the ADHD group were 19.79(±2.94), 12.31(±1.84), 5.26(±2.29) and 5.89(±2.13), respectively (P<0.001). The corresponding figures for these indices in the normal group were 12.11(±4.74), 5.63(±2), 10.36± (2.33) and 2.88(±2.13), respectively (P<0.001). Significant differences were obtained between the control group and children with ADHD using these two drawing tests. The rate of impulsivity and emotional problems indices in drawings of children with ADHD was markedly more common than those of the typically developing children. This suggests the need for further assessment to screen ADHD.

In-situ-measurement of the friction coefficient in the deep drawing process

NASA Astrophysics Data System (ADS)

Recklin, V.; Dietrich, F.; Groche, P.

2017-09-01

The surface texture plays an important role in the tribological behaviour of deep drawn components. It influences both the process of sheet metal forming as well as the properties for post processing, such as paint appearance, bonding, or corrosion tendency. During the forming process, the texture of the sheet metal and therefore its friction coefficient, changes due to process related strains. This contribution focuses on the development and validation of a tool to investigate the friction coefficient of the flange region of deep drawn components. The influence of biaxial strain on the friction coefficient will be quantified through a comparison of the experimental results with a conventional friction test (stand). The presented method will be applied on a cup drawing test, using a segmented and sensor-monitored blankholder. This setup allows the measurement of the friction coefficient in-situ without simplification of the real process. The experiments were carried out using DX 56D+Z as sheet metal and PL61 as lubricant. The results show a characteristic change in the friction coefficient over the displacement of the punch, which is assumed to be caused by strain induced change of the surface texture.

10. TYPICAL DETAILS OF LENNON FLUME, SANTA ANA NO. 3, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. TYPICAL DETAILS OF LENNON FLUME, SANTA ANA NO. 3, EXHIBIT L, JAN. 25, 1956. SCE drawing no. 541722 (sheet 4; for filing with Federal Power Commission). - Santa Ana River Hydroelectric System, Warm Springs Canyon-SAR-3 Flumes, Redlands, San Bernardino County, CA

Nitrate Contamination of Deep Aquifers in the Salinas Valley, California

NASA Astrophysics Data System (ADS)

Moran, J. E.; Esser, B. K.; Hillegonds, D. J.; Holtz, M.; Roberts, S. K.; Singleton, M. J.; Visser, A.; Kulongoski, J. T.; Belitz, K.

2011-12-01

The Salinas Valley, known as 'the salad bowl of the world', has been an agricultural center for more than 100 years. Irrigated row crops such as lettuce and strawberries dominate both land use and water use. Groundwater is the exclusive supply for both irrigation and drinking water. Some irrigation wells and most public water supply wells in the Salinas Valley are constructed to draw water from deep portions of the aquifer system, where contamination by nitrate is less likely than in the shallow portions of the aquifer system. However, a number of wells with top perforations greater than 75 m deep, screened below confining or semi-confining units, have nitrate concentrations greater than the Maximum Contaminant Limit (MCL) of 45 mg/L as NO3-. This study uses nitrate concentrations from several hundred irrigation, drinking water, and monitoring wells (Monterey County Water Resources Agency, 1997), along with tritium-helium groundwater ages acquired at Lawrence Livermore National Laboratory through the State of California Groundwater Monitoring and Assessment (GAMA) program (reported in Kulongoski et al., 2007 and in Moran et al., in press), to identify nitrate 'hot spots' in the deep aquifer and to examine possible modes of nitrate transport to the deep aquifer. In addition, observed apparent groundwater ages are compared with the results of transport simulations that use particle tracking and a stochastic-geostatistical framework to incorporate aquifer heterogeneity to determine the distribution of travel times from the water table to each well (Fogg et al., 1999). The combined evidence from nitrate, tritium, tritiogenic 3He, and radiogenic 4He concentrations, reveals complex recharge and flow to the capture zone of the deep drinking water wells. Widespread groundwater pumping for irrigation accelerates vertical groundwater flow such that high nitrate groundwater reaches some deep drinking water wells. Deeper portions of the wells often draw in water that recharged before agricultural activity began in the valley, while some shallower intervals draw in recycled irrigation water which can have a low tritium concentration but high nitrate concentration. The irrigation return water may take a decade or more to reach the water table, given that the vadose zone in some affected areas is more than 30 m deep, but downward migration is likely enhanced by preferential flow paths, plowing, crop removal, and sprinkler irrigation in surrounding fields. This work was performed under the auspices of the U.S. DOE by LLNL under Contract DE-AC52-07NA27344. Fogg et al., 1999, in AGU Geophysical Monograph 108. Kulongoski et al., 2007. USGS Data Series Report 167 Monterey County Water Agency, 1997. Water Resources Data Report (Water Year 1994-1995) Moran et al., 2011. California GAMA Special Study: Nitrate Fate and Transport in the Salinas Valley. LLNL, in press.

Creative Imagination Is Stable across Technological Media: The Spore Creature Creator versus Pencil and Paper

ERIC Educational Resources Information Center

Cockbain, Jessica; Vertolli, Michael O.; Davies, Jim

2014-01-01

T. B. Ward (1994) investigated creativity by asking participants to draw alien creatures that they imagined to be from a planet very different from Earth. He found that participant drawings reliably contained features typical of common Earth animals. As a consequence, Ward concluded that creativity is structured. The present investigation predicts…

7. FLOOR PLAN, PLOT PLAN, ELEVATIONS, SHEET NO. 11044/1 OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. FLOOR PLAN, PLOT PLAN, ELEVATIONS, SHEET NO. 1-10-44/1 OF 11. (NOTE: BUILDINGS 821-823 WERE CONSTRUCTED FROM A SINGLE SET OF PLANS. SOME DRAWINGS ARE TYPICAL OF ALL 3 STRUCTURES, CERTAIN OTHER DRAWINGS IN THE SAME SET ARE BUILDING-SPECIFIC.) - Oakland Army Base, Storehouse Type, Ukraine & Maritime Streets, Oakland, Alameda County, CA

Springback optimization in automotive Shock Absorber Cup with Genetic Algorithm

NASA Astrophysics Data System (ADS)

Kakandikar, Ganesh; Nandedkar, Vilas

2018-02-01

Drawing or forming is a process normally used to achieve a required component form from a metal blank by applying a punch which radially draws the blank into the die by a mechanical or hydraulic action or combining both. When the component is drawn for more depth than the diameter, it is usually seen as deep drawing, which involves complicated states of material deformation. Due to the radial drawing of the material as it enters the die, radial drawing stress occurs in the flange with existence of the tangential compressive stress. This compression generates wrinkles in the flange. Wrinkling is unwanted phenomenon and can be controlled by application of a blank-holding force. Tensile stresses cause thinning in the wall region of the cup. Three main types of the errors occur in such a process are wrinkling, fracturing and springback. This paper reports a work focused on the springback and control. Due to complexity of the process, tool try-outs and experimentation may be costly, bulky and time consuming. Numerical simulation proves to be a good option for studying the process and developing a control strategy for reducing the springback. Finite-element based simulations have been used popularly for such purposes. In this study, the springback in deep drawing of an automotive Shock Absorber Cup is simulated with finite element method. Taguchi design of experiments and analysis of variance are used to analyze the influencing process parameters on the springback. Mathematical relations are developed to relate the process parameters and the resulting springback. The optimization problem is formulated for the springback, referring to the displacement magnitude in the selected sections. Genetic Algorithm is then applied for process optimization with an objective to minimize the springback. The results indicate that a better prediction of the springback and process optimization could be achieved with a combined use of these methods and tools.

Assessing the Linguistic Productivity of Unsupervised Deep Neural Networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phillips, Lawrence A.; Hodas, Nathan O.

Increasingly, cognitive scientists have demonstrated interest in applying tools from deep learning. One use for deep learning is in language acquisition where it is useful to know if a linguistic phenomenon can be learned through domain-general means. To assess whether unsupervised deep learning is appropriate, we first pose a smaller question: Can unsupervised neural networks apply linguistic rules productively, using them in novel situations. We draw from the literature on determiner/noun productivity by training an unsupervised, autoencoder network measuring its ability to combine nouns with determiners. Our simple autoencoder creates combinations it has not previously encountered, displaying a degree ofmore » overlap similar to actual children. While this preliminary work does not provide conclusive evidence for productivity, it warrants further investigation with more complex models. Further, this work helps lay the foundations for future collaboration between the deep learning and cognitive science communities.« less

Direct Multizone System -- DMS1-275.

ERIC Educational Resources Information Center

Lennox Industries, Inc., Marshalltown, IA.

Lennox Direct Multizone System as a new concept for integrated comfort control is described. The following areas of concern are included--(1) flexibility - typical applications, (2) detailed engineering data, (3) accessories, (4) approvals, (5) guide specifications, (6) dimensional drawings of a typical unit, (7) blower data, (8) mounting data,…

10. DETAILS OF STEEL FLUME, TYPICAL BENTS AND TRUSSES. EXHIBIT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. DETAILS OF STEEL FLUME, TYPICAL BENTS AND TRUSSES. EXHIBIT L, SANTA ANA RIVER NO. 1 PROJECT, APR. 30, 1945. SCE drawing no. 523196 (sheet no. 6; for filing with Federal Power Commission). - Santa Ana River Hydroelectric System, Flumes & Tunnels below Sandbox, Redlands, San Bernardino County, CA

9. DETAILS OF STEEL FLUME, TYPICAL CURVES AND TRANSITIONS. EXHIBIT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. DETAILS OF STEEL FLUME, TYPICAL CURVES AND TRANSITIONS. EXHIBIT L, SANTA ANA RIVER NO. 1 PROJECT, APR. 30, 1945. SCE drawing no. 523195 (sheet no. 5; for filing with Federal Power Commission). - Santa Ana River Hydroelectric System, Flumes & Tunnels below Sandbox, Redlands, San Bernardino County, CA

Using Ethnic Art to Emphasize Laws of Reflection

ERIC Educational Resources Information Center

Bapat, Madhuri

2009-01-01

The Kolam (Rangolee) art (Fig. 1) from Southern India and Sona drawings (Fig. 2) from Africa show the similarity of lines going around the dots. Kolam is usually drawn, with paste made up of rice powder, on the floor in front of a house. Typically girls draw these in India on occasions such as welcoming the spring season, weddings, or birthdays.…

Perceptions of Siblings with Autism and Relationships with Them: European American and Asian American Siblings Draw and Tell

ERIC Educational Resources Information Center

Sage, Kara D.; Jegatheesan, Brinda

2010-01-01

Background: This study examined typically developing children's perceptions of their siblings with autism and their relationships with them in a European American and an Asian American family. Method: Data were drawn from interviews with the siblings using the "draw-and-tell" technique and participant observation in the homes of the 2 families.…

The Bicycle Drawing Test: What Does It Measure in Developmentally Typical Children?

PubMed

Cannoni, Eleonora; Di Norcia, Anna; Bombi, Anna Silvia; Di Giunta, Laura

2015-10-01

To verify the dimensionality of Bicycle Drawing Test (BDT), we applied the coding system of Greenberg, Rodriguez, and Sesta to bicycle drawings made by 295 boys and 320 girls (6-10 years old) with typical development, and submitted the data to item analysis, exploratory factor analysis, and confirmatory factor analysis. These analyses confirmed only two of the original four dimensions of the BDT: spatial reasoning and visual-motor control. The scores in these two factors were correlated with the Colored Progressive Matrices, the Rey Complex Figure (Copy and Memory) and with the teachers' ratings in mathematics, language, and drawing. The correlations, albeit moderate in magnitude, were consistent with the hypothesized convergent and discriminant validity. After checking for measurement invariance across gender and age, we conducted two analyses of variance, the first of which showed a significant difference between younger children (6-8 years old) and older children (9-10 years old); the analysis of variance by gender did not yield significant differences. These data enhance the usefulness of the BDT as a measure of separate cognitive components, but do not support its use as a measure of mechanical reasoning. © The Author(s) 2014.

Drawing ability in typical and atypical development; colour cues and the effect of oblique lines.

PubMed

Farran, E K; Dodd, G F

2015-06-01

Individuals with Williams syndrome (WS) have poor drawing ability. Here, we investigated whether colour could be used as a facilitation cue during a drawing task. Participants with WS and non-verbal ability matched typically developing (TD) children were shown line figures presented on a 3 by 3 dot matrix, and asked to replicate the figures by drawing on an empty dot matrix. The dots of the matrix were either all black (control condition), or nine different coloured dots (colour condition). In a third condition, which also used coloured dots, participants were additionally asked to verbalise the colours of the dots prior to replicating the line drawings (colour-verbal condition). Performance was stronger in both WS and TD groups on the two coloured conditions, compared with the control condition. However, the facilitation effect of colour was significantly weaker in the WS group than in the TD group. Replication of oblique line segments was less successful than replication of non-oblique line segments for both groups; this effect was reduced by colour facilitation in the TD group only. Verbalising the colours had no additional impact on performance in either group. We suggest that colour acted as a cue to individuate the dots, thus enabling participants to better ascertain the spatial relationships between the parts of each figure, to determine the start and end points of component lines, and to determine the correspondence between the model and their replication. The reduced facilitation in the WS group is discussed in relation to the effect of oblique versus non-oblique lines, the use of atypical drawing strategies, and reduced attention to the model when drawing the replication. © 2014 MENCAP and International Association of the Scientific Study of Intellectual and Developmental Disabilities and John Wiley & Sons Ltd.

Seeing Deep Structure from the Interactions of Surface Features

ERIC Educational Resources Information Center

Chi, Michelene T. H.; VanLehn, Kurt A.

2012-01-01

Transfer is typically thought of as requiring individuals to "see" what is the same in the deep structure between a new target problem and a previously encountered source problem, even though the surface features may be dissimilar. We propose that experts can "see" the deep structure by considering the first-order interactions…

Deep Levels of Processing Elicit a Distinctiveness Heuristic: Evidence from the Criterial Recollection Task

ERIC Educational Resources Information Center

Gallo, David A.; Meadow, Nathaniel G.; Johnson, Elizabeth L.; Foster, Katherine T.

2008-01-01

Thinking about the meaning of studied words (deep processing) enhances memory on typical recognition tests, relative to focusing on perceptual features (shallow processing). One explanation for this levels-of-processing effect is that deep processing leads to the encoding of more distinctive representations (i.e., more unique semantic or…

Abnormal neuronal activity in Tourette syndrome and its modulation using deep brain stimulation

PubMed Central

Israelashvili, Michal; Loewenstern, Yocheved

2015-01-01

Tourette syndrome (TS) is a common childhood-onset disorder characterized by motor and vocal tics that are typically accompanied by a multitude of comorbid symptoms. Pharmacological treatment options are limited, which has led to the exploration of deep brain stimulation (DBS) as a possible treatment for severe cases. Multiple lines of evidence have linked TS with abnormalities in the motor and limbic cortico-basal ganglia (CBG) pathways. Neurophysiological data have only recently started to slowly accumulate from multiple sources: noninvasive imaging and electrophysiological techniques, invasive electrophysiological recordings in TS patients undergoing DBS implantation surgery, and animal models of the disorder. These converging sources point to system-level physiological changes throughout the CBG pathway, including both general altered baseline neuronal activity patterns and specific tic-related activity. DBS has been applied to different regions along the motor and limbic pathways, primarily to the globus pallidus internus, thalamic nuclei, and nucleus accumbens. In line with the findings that also draw on the more abundant application of DBS to Parkinson's disease, this stimulation is assumed to result in changes in the neuronal firing patterns and the passage of information through the stimulated nuclei. We present an overview of recent experimental findings on abnormal neuronal activity associated with TS and the changes in this activity following DBS. These findings are then discussed in the context of current models of CBG function in the normal state, during TS, and finally in the wider context of DBS in CBG-related disorders. PMID:25925326

Rising to the challenge: Deep acting is more beneficial when tasks are appraised as challenging.

PubMed

Huang, Jason L; Chiaburu, Dan S; Zhang, Xin-an; Li, Ning; Grandey, Alicia A

2015-09-01

Cumulative research indicates that deep acting has a nonsignificant relationship with employee exhaustion, despite arguments that deep acting can be beneficial. To illuminate when deep acting leads to more positive employee outcomes, we draw on the resource conservation perspective to propose a within-individual model of deep acting that focuses on service employees' daily fluctuation of emotional labor and emotional exhaustion. Specifically, we propose that the ongoing experience of felt challenge is a within-person boundary condition that moderates deep acting's relationship with emotional exhaustion, and model emotional exhaustion as a mediating mechanism that subsequently predicts momentary job satisfaction and daily customer conflict handling. Using an experience sampling design, we collected data from 84 service employees over a 3-week period. Deep acting was less emotionally exhausting for service providers when they saw their tasks as more challenging. Furthermore, emotional exhaustion mediated the deep acting by felt challenge interaction effect on momentary job satisfaction and daily customer conflict handling. The findings contribute to a better understanding of the deep acting experience at work, while highlighting customer conflict handling as a key behavioral outcome of emotional labor. (c) 2015 APA, all rights reserved).

NAAMES Photo Essay

NASA Image and Video Library

2017-12-08

The R/V Atlantis is one of three research vessels built to roughly the same specifications. One of its unique claims to fame is that it typically hosts the DSV (Deep SubmergenceVehicle) Alvin. --- The North Atlantic Aerosols and Marine Ecosystems Study (NAAMES) is a five year investigation to resolve key processes controlling ocean system function, their influences on atmospheric aerosols and clouds and their implications for climate. Michael Starobin joined the NAAMES field campaign on behalf of Earth Expeditions and NASA Goddard Space Flight Center’s Office of Communications. He presented stories about the important, multi-disciplinary research being conducted by the NAAMES team, with an eye towards future missions on the NASA drawing board. This is a NAAMES photo essay put together by Starobin, a collection of 49 photographs and captions. Photo and Caption Credit: Michael Starobin NASA image use policy NASA Goddard Space Flight Center enables NASA’s mission through four scientific endeavors: Earth Science, Heliophysics, Solar System Exploration, and Astrophysics. Goddard plays a leading role in NASA’s accomplishments by contributing compelling scientific knowledge to advance the Agency’s mission. Follow us on Twitter Like us on Facebook Find us on Instagram

Meteorological variables associated with deep slab avalanches on persistent weak layers

USGS Publications Warehouse

Marienthal, Alex; Hendrikx, Jordy; Birkeland, Karl; Irvine, Kathryn M.

2014-01-01

Deep slab avalanches are a particularly challenging avalanche forecasting problem. These avalanches are typically difficult to trigger, yet when they are triggered they tend to propagate far and result in large and destructive avalanches. For this work we define deep slab avalanches as those that fail on persistent weak layers deeper than 0.9m (3 feet), and that occur after February 1st. We utilized a 44-year record of avalanche control and meteorological data from Bridger Bowl Ski Area to test the usefulness of meteorological variables for predicting deep slab avalanches. As in previous studies, we used data from the days preceding deep slab cycles, but we also considered meteorological metrics over the early months of the season. We utilized classification trees for our analyses. Our results showed warmer temperatures in the prior twenty-four hours and more loading over the seven days before days with deep slab avalanches on persistent weak layers. In line with previous research, extended periods of above freezing temperatures led to days with deep wet slab avalanches on persistent weak layers. Seasons with either dry or wet avalanches on deep persistent weak layers typically had drier early months, and often had some significant snow depth prior to those dry months. This paper provides insights for ski patrollers, guides, and avalanche forecasters who struggle to forecast deep slab avalanches on persistent weak layers late in the season.

Graph Drawing Aesthetics-Created by Users, Not Algorithms.

PubMed

Purchase, H C; Pilcher, C; Plimmer, B

2012-01-01

Prior empirical work on layout aesthetics for graph drawing algorithms has concentrated on the interpretation of existing graph drawings. We report on experiments which focus on the creation and layout of graph drawings: participants were asked to draw graphs based on adjacency lists, and to lay them out "nicely." Two interaction methods were used for creating the drawings: a sketch interface which allows for easy, natural hand movements, and a formal point-and-click interface similar to a typical graph editing system. We find, in common with many other studies, that removing edge crossings is the most significant aesthetic, but also discover that aligning nodes and edges to an underlying grid is important. We observe that the aesthetics favored by participants during creation of a graph drawing are often not evident in the final product and that the participants did not make a clear distinction between the processes of creation and layout. Our results suggest that graph drawing systems should integrate automatic layout with the user's manual editing process, and provide facilities to support grid-based graph creation.

Genes influence young children's human figure drawings and their association with intelligence a decade later.

PubMed

Arden, Rosalind; Trzaskowski, Maciej; Garfield, Victoria; Plomin, Robert

2014-10-01

Drawing is ancient; it is the only childhood cognitive behavior for which there is any direct evidence from the Upper Paleolithic. Do genes influence individual differences in this species-typical behavior, and is drawing related to intelligence (g) in modern children? We report on the first genetically informative study of children's figure drawing. In a study of 7,752 pairs of twins, we found that genetic differences exert a greater influence on children's figure drawing at age 4 than do between-family environmental differences. Figure drawing was as heritable as g at age 4 (heritability of .29 for both). Drawing scores at age 4 correlated significantly with g at age 4 (r = .33, p < .001, n = 14,050) and with g at age 14 (r = .20, p < .001, n = 4,622). The genetic correlation between drawing at age 4 and g at age 14 was .52, 95% confidence interval = [.31, .75]. Individual differences in this widespread behavior have an important genetic component and a significant genetic link with g. © The Author(s) 2014.

Authenticity and autonomy in deep-brain stimulation.

PubMed

Wardrope, Alistair

2014-08-01

Felicitas Kraemer draws on the experiences of patients undergoing deep-brain stimulation (DBS) to propose two distinct and potentially conflicting principles of respect: for an individual's autonomy (interpreted as mental competence), and for their authenticity. I argue instead that, according to commonly-invoked justifications of respect for autonomy, authenticity is itself in part constitutive of an analysis of autonomy worthy of respect; Kraemer's argument thus highlights the shortcomings of practical applications of respect for autonomy that emphasise competence while neglecting other important dimensions of autonomy such as authenticity, since it shows that competence alone cannot be interpreted as a reliable indicator of an individual's capacity for exercising autonomy. I draw from relational accounts to suggest how respect for a more expansive conception of autonomy might be interpreted for individuals undergoing DBS and in general. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

27. Photocopy of scale drawing (from Station 'L' office files, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

27. Photocopy of scale drawing (from Station 'L' office files, Portland, Oregon) Portland General Electric proposal to city/state, 10/15/1929 FOUNDATION AND LOCATION OF THE STATION SCREEN HOUSE AND A LOOK AT THE TYPICAL DREDGING OF THE RIVER BED WHICH TOOK PLACE ON A PERIODIC BASIS AT STATION 'L' - Portland General Electric Company, Station "L", 1841 Southeast Water Street, Portland, Multnomah County, OR

41. Perimeter acquisition radar building radar element and coaxial display, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

41. Perimeter acquisition radar building radar element and coaxial display, with drawing of typical antenna section. Drawing, from left to right, shows element, aluminum ground plane, cable connectors and hardware, cable, and back-up ring. Grey area is the concrete wall - Stanley R. Mickelsen Safeguard Complex, Perimeter Acquisition Radar Building, Limited Access Area, between Limited Access Patrol Road & Service Road A, Nekoma, Cavalier County, ND

In-Situ-measurement of restraining forces during forming of rectangular cups

NASA Astrophysics Data System (ADS)

Singer, M.; Liewald, M.

2016-11-01

This contribution introduces a new method for evaluating the restraining forces during forming of rectangular cups with the goal of eliminating the disadvantages of the currently used scientifically established measurement procedures. With this method forming forces are measured indirectly by the elastic deformation of die structure caused by locally varying tribological system. Therefore, two sensors were integrated into the punch, which measure the restraining forces during the forming process. Furthermore, it was possible to evaluate the effects of different lubricants showing the time dependent trend as a function of stroke during the forming of the materials DP600 and DC04. A main advantage of this testing method is to get real friction corresponding data out of the physical deep drawing process as well as the measurement of real acting restraining forces at different areas of the deep drawing part by one single test. Measurement results gained by both sensors have been integrated into LS-Dyna simulation in which the coefficient of friction was regarded as a function of time. The simulated and deep drawn parts afterwards are analysed and compared to specific areas with regard to locally measured thickness of part. Results show an improvement of simulation quality when using locally varying, time dependent coefficients of friction compared to commonly used constant values.

DRAWING SKILLS IN CHILDREN WITH NEURODEVELOPMENTAL DELAY AGED 2-5 YEARS.

PubMed

Morović, Maja Lang; Matijević, Valentina; Divljaković, Kristina; Kraljević, Marija; Dimić, Zdenka

2015-06-01

In typically developing children, drawing development occurs in stages from uncontrolled strokes to complex drawing. In this study, we examined drawing development in children with neurodevelopmental delay (NDD). In order to do so, we observed the influence of age, intraventricular hemorrhage (IVH) and gender on the development of drawing skills. The sample consisted of 52 children with NDD, aged 2 years and 6 months to 5 years. All children were hospitalized for multidisciplinary team monitoring and developmental support. The evaluation of drawing development was administered by giving each child a blank A4 paper and the instruction to draw anything they wanted. All of the drawings were scored satisfactory or unsatisfactory. Descriptive statistics was employed on all relevant data to show results in frequencies and percentages. In order to determine differences between groups, the χ2-test was administered. The results showed greatest difference in drawing in children aged from 3 years to 3 years and 11 months. Children with lower IVH had better drawing scores than children with higher IVH levels. According to gender dissimilarities, a difference was found showing girls to have better drawing skills than boys. All study results pointed to the importance of early rehabilitation and continuous structured work with children with NDD.

Meteorological variables to aid forecasting deep slab avalanches on persistent weak layers

USGS Publications Warehouse

Marienthal, Alex; Hendrikx, Jordy; Birkeland, Karl; Irvine, Kathryn M.

2015-01-01

Deep slab avalanches are particularly challenging to forecast. These avalanches are difficult to trigger, yet when they release they tend to propagate far and can result in large and destructive avalanches. We utilized a 44-year record of avalanche control and meteorological data from Bridger Bowl ski area in southwest Montana to test the usefulness of meteorological variables for predicting seasons and days with deep slab avalanches. We defined deep slab avalanches as those that failed on persistent weak layers deeper than 0.9 m, and that occurred after February 1st. Previous studies often used meteorological variables from days prior to avalanches, but we also considered meteorological variables over the early months of the season. We used classification trees and random forests for our analyses. Our results showed seasons with either dry or wet deep slabs on persistent weak layers typically had less precipitation from November through January than seasons without deep slabs on persistent weak layers. Days with deep slab avalanches on persistent weak layers often had warmer minimum 24-hour air temperatures, and more precipitation over the prior seven days, than days without deep slabs on persistent weak layers. Days with deep wet slab avalanches on persistent weak layers were typically preceded by three days of above freezing air temperatures. Seasonal and daily meteorological variables were found useful to aid forecasting dry and wet deep slab avalanches on persistent weak layers, and should be used in combination with continuous observation of the snowpack and avalanche activity.

Influence of the pressure dependent coefficient of friction on deep drawing springback predictions

NASA Astrophysics Data System (ADS)

Gil, Imanol; Galdos, Lander; Mendiguren, Joseba; Mugarra, Endika; Sáenz de Argandoña, Eneko

2016-10-01

This research studies the effect of considering an advanced variable friction coefficient on the springback prediction of stamping processes. Traditional constant coefficient of friction considerations are being replaced by more advanced friction coefficient definitions. The aim of this work is to show the influence of defining a pressure dependent friction coefficient on numerical springback predictions of a DX54D mild steel, a HSLA380 and a DP780 high strength steel. The pressure dependent friction model of each material was fitted to the experimental data obtained by Strip Drawing tests. Then, these friction models were implemented in a numerical simulation of a drawing process of an industrial automotive part. The results showed important differences between defining a pressure dependent friction coefficient or a constant friction coefficient.

Experimental analysis of the sheet metal forming behavior of newly developed press hardening steels

NASA Astrophysics Data System (ADS)

Meza-García, Enrique; Kräusel, Verena; Landgrebe, Dirk

2018-05-01

The aim of this work was the characterization of the newly developed press hardening sheet alloys 1800 PHS and 2000 PHS developed by SSAB with regard to their hot forming behavior on the basis of the experimental determination of relevant mechanical and technological properties. For this purpose conventional and non-conventional sheet metal testing methods were used. To determine the friction coefficient, the strip drawing test was applied, while the deep drawing cup test was used to determine the maximum draw depth. Finally, a V-bending test was carried out to evaluate the springback behavior of the investigated alloys by varying the blank temperature and quenching media. This work provides a technological guideline for the production of press hardened sheet parts made of these investigated sheet metals.

Teaching Flowers: A Photo Essay

ERIC Educational Resources Information Center

Hewson, Federico

2017-01-01

"Teaching Flowers" reflects on humanity's deep connections to horticulture by gathering varied thoughts from seminal writers in the field. In addition, this visual article draws attention to labor issues within the U.S. floral industry by documenting the author's exploration of flowers as social sculpture in New York City.

Phonetics and Other Disciplines: Then and Now.

ERIC Educational Resources Information Center

Bronstein, Arthur J.; Raphael, Lawrence J.

Phonetic science is becoming increasingly interdisciplinary. Phoneticians rely on, or at least collaborate with, sociologists, psychologists, biologists, poets, physicists, anthropologists, neurologists and others. A look at the history of phonetics reveals that this seemingly recent trend has deep roots. In fact, it is possible to draw parallels…

Thinking big

NASA Astrophysics Data System (ADS)

Collins, Harry

2008-02-01

Physicists are often quick to discount social research based on qualitative techniques such as ethnography and "deep case studies" - where a researcher draws conclusions about a community based on immersion in the field - thinking that only quantitative research backed up by statistical analysis is sound. The balance is not so clear, however.

Finding Meaning: Sense Inventories for Improved Word Sense Disambiguation

ERIC Educational Resources Information Center

Brown, Susan Windisch

2010-01-01

The deep semantic understanding necessary for complex natural language processing tasks, such as automatic question-answering or text summarization, would benefit from highly accurate word sense disambiguation (WSD). This dissertation investigates what makes an appropriate and effective sense inventory for WSD. Drawing on theories and…

The Impact of Data Fragmentation on High-Throughput Clinical Phenotyping

ERIC Educational Resources Information Center

Wei, Weiqi

2012-01-01

Subject selection is essential and has become the rate-limiting step for harvesting knowledge to advance healthcare through clinical research. Present manual approaches inhibit researchers from conducting deep and broad studies and drawing confident conclusions. High-throughput clinical phenotyping (HTCP), a recently proposed approach, leverages…

Wilderness Vision Quest: A Journey of Transformation.

ERIC Educational Resources Information Center

Brown, Michael H.

The Wilderness Vision Quest is an outdoor retreat which helps participants touch, explore, and develop important latent human resources such as imagination, intuition, creativity, inspiration, and insight. Through the careful and focused use of techniques such as deep relaxation, reflective writing, visualization, guided imagery, symbolic drawing,…

Catholic Education: From and for Faith

ERIC Educational Resources Information Center

Groome, Thomas

2014-01-01

Catholic education arises from the deep structures and earliest traditions of Christian faith. Its commitments throughout the centuries have been to educate both "from" and "for" faith. It educates from a faith perspective by drawing upon the universal values of Catholicism to provide a distinctive philosophy, perhaps even more…

Drawing simulation by static implicit analysis with the artificial damping method

NASA Astrophysics Data System (ADS)

Oide, K.; Mihara, Y.; Kobayashi, T.; Takizawa, H.; Amaishi, T.; Umezu, Y.

2016-08-01

Wrinkling during draw is typically a local instability problem. When the structural instability is localized, there will be a local transfer of strain energy from one part of the structure to neighboring parts, and global solution methods, which is typically represented by the arc length method, may not work. So, this type of problems has to be solved either dynamically or with the artificial damping. On the other hand, the essential nature of the buckling behavior can be regarded as a static problem, even though it may be possible to raise some side issues due to the inertia effect. In this study, we traced the local buckling behavior of anisotropic elasto-plastic thin shells in Numisheet2014 BM4 using the artificial damping method.

Application of shell elements in simulation of cans ironing

NASA Astrophysics Data System (ADS)

Andrianov, A. V.; Erisov, Y. A.; Aryshensky, E. V.; Aryshensky, V. Y.

2017-01-01

In the present study, the special shell finite elements are used to simulate the drawing with high ironing ratio of aluminum beverage cans. These elements are implemented in commercial software complex PAM-STAMP 2G by means of T.T.S. normal stress option, which is used for ironing to describe well normal stress. By comparison of simulation and experimental data, it is shown that shell elements with T.T.S. option are capable to provide accurate simulation of deep drawing and ironing. The error of can thickness and height computation agrees with the engineering computation accuracy.

a Walk Through Earth's Time

NASA Astrophysics Data System (ADS)

Turrin, B. D.; Turrin, M.

2012-12-01

After "What is this rock?" the most common questions that is asked of Geologists is "How old is this rock/fossil?" For geologists considering ages back to millions of years is routine. Sorting and cataloguing events into temporal sequences is a natural tendency for all humans. In fact, it is an everyday activity for humans, i.e., keeping track of birthdays, anniversaries, appointments, meetings, AGU abstract deadlines etc… However, the time frames that are most familiar to the non scientist (seconds, minutes, hours, days, years) generally extend to only a few decades or at most centuries. Yet the vast length of time covered by Earth's history, 4.56 billion years, greatly exceeds these timeframes and thus is commonly referred to as "Deep Time". This is a challenging concept for most students to comprehend as it involves temporal and abstract thinking, yet it is key to their successful understanding of numerous geologic principles. We have developed an outdoor learning activity for general Introductory Earth Science courses that incorporates several scientific and geologic concepts such as: linear distance or stratigraphic thickness representing time, learning about major events in Earth's history and locating them in a scaled temporal framework, field mapping, abstract thinking, scaling and dimensional analysis, and the principles of radio isotopic dating. The only supplies needed are readily available in local hardware stores i.e. a 300 ft. surveyor's tape marked in feet, and tenths and hundredths of a foot, and the student's own introductory geology textbook. The exercise employs a variety of pedagogical learning modalities, including traditional lecture-based, the use of Art/Drawing, use of Visualization, Collaborative learning, and Kinesthetic and Experiential learning. Initially the students are exposed to the concept of "Deep Time" in a short conventional introductory lecture; this is followed by a 'field day'. Prior to the field exercise, students work with their textbook selecting events is Earth History that they find interesting. Using the textbook and online resources they then draw figures that represent these events. The drawing exercise reinforces the learning by having students visualize (imprinting an image) of these geologic events. Once the students have produced their drawings, the outdoor field exercise follows. Working collaboratively, the students measure and lay out a scaled linear model representing 4.56 billion years of geologic time. They then organize and place their drawings in the proper sequence on the temporal model that they have created. Once all the drawings are in place they are able to visualize the expanse of time in Earth's history. Through comparing results from a pre-test to those from a post-test we can show the gains in student understanding of Deep Time, a concept that is central to many of our geologic understandings.

Photoinduced current transient spectroscopy of deep levels and transport mechanisms in iron-doped GaN thin films grown by low pressure-metalorganic vapor phase epitaxy

NASA Astrophysics Data System (ADS)

Muret, P.; Pernot, J.; Azize, M.; Bougrioua, Z.

2007-09-01

Electrical transport and deep levels are investigated in GaN:Fe layers epitaxially grown on sapphire by low pressure metalorganic vapor phase epitaxy. Photoinduced current transient spectroscopy and current detected deep level spectroscopy are performed between 200 and 650 K on three Fe-doped samples and an undoped sample. A detailed study of the detected deep levels assigns dominant centers to a deep donor 1.39 eV below the conduction band edge EC and to a deep acceptor 0.75 eV above the valence band edge EV at low electric field. A strong Poole-Frenkel effect is evidenced for the donor. Schottky diodes characteristics and transport properties in the bulk GaN:Fe layer containing a homogenous concentration of 1019 Fe/cm3 are typical of a compensated semiconductor. They both indicate that the bulk Fermi level is located typically 1.4 eV below EC, in agreement with the neutrality equation and dominance of the deep donor concentration. This set of results demonstrates unambiguously that electrical transport in GaN:Fe is governed by both types, either donor or acceptor, of the iron impurity, either substitutional in gallium sites or associated with other defects.

Photographic copy of original drawing, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of original drawing, by Corps of Engineers, U.S. Army, May 1938 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 1, lining details and typical sections of invert - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Estimating surface hardening profile of blank for obtaining high drawing ratio in deep drawing process using FE analysis

NASA Astrophysics Data System (ADS)

Tan, C. J.; Aslian, A.; Honarvar, B.; Puborlaksono, J.; Yau, Y. H.; Chong, W. T.

2015-12-01

We constructed an FE axisymmetric model to simulate the effect of partially hardened blanks on increasing the limiting drawing ratio (LDR) of cylindrical cups. We partitioned an arc-shaped hard layer into the cross section of a DP590 blank. We assumed the mechanical property of the layer is equivalent to either DP980 or DP780. We verified the accuracy of the model by comparing the calculated LDR for DP590 with the one reported in the literature. The LDR for the partially hardened blank increased from 2.11 to 2.50 with a 1 mm depth of DP980 ring-shaped hard layer on the top surface of the blank. The position of the layer changed with drawing ratios. We proposed equations for estimating the inner and outer diameters of the layer, and tested its accuracy in the simulation. Although the outer diameters fitted in well with the estimated line, the inner diameters are slightly less than the estimated ones.

Systematic Distortions in Vertical Placement of Features in Drawings of Faces and Houses

PubMed Central

Jones, Julia; Davies, Simon J.

2017-01-01

A crucial part of accurately drawing portraits is the correct vertical positioning of the eyes. Non-experts typically place the eyes higher on the head than they are actually located; however, the explanation for this remains unclear. In Experiment 1, participants drew faces from memory and directly copied from a photograph, to confirm whether biases in observational drawings were related to biases in memory-based drawings. In Experiment 2, participants drew a cat’s face, to test explanations by Carbon and Wirth for the positional bias: the ‘view-from-below, the ‘head-as-box’, and the ‘hair-as-hat’ explanations. Results indicated that none of these three explanations could fully account for the vertical positioning biases observed in drawings of the cat’s face. The findings are discussed in relation to the idea that distortions of vertical alignment in drawings may be related to the position of the most salient features within a face or object. PMID:28210488

Data Literacy: Real-World Learning through Problem-Solving with Data Sets

ERIC Educational Resources Information Center

Erwin, Robin W., Jr.

2015-01-01

The achievement of deep learning by secondary students requires teaching approaches that draw students into task commitment, integrated curricula, and analytical thinking. By using real-world data sets in project based instructional units, teachers can guide students in analyzing, interpreting, and reporting quantitative data. Working with…

Helping Disadvantaged Students: Findings from the Thuthuka Programme

ERIC Educational Resources Information Center

Barac, Karin

2015-01-01

Drawing on social closure theory, this study achieved a deep understanding of the perceptions and experiences of the first cohort of candidates passing through the Thuthuka support programme. Using semi-structured interviews as part of a qualitative approach, currently prevalent modes of professional closure were considered by taking the…

A Study of Undergraduate Students' Alternative Conceptions of Earth's Interior Using Drawing Tasks

ERIC Educational Resources Information Center

McAllister, Meredith L.

2014-01-01

Learning fundamental geoscience topics such as plate tectonics, earthquakes, and volcanoes requires students to develop a deep understanding of the conceptual models geologists use when describing the structure and dynamics of Earth's interior. Despite the importance of these mental models underlying much of the undergraduate geoscience…

Dance Like a Butterfly

ERIC Educational Resources Information Center

Stapp, Alicia; Chessin, Debby; Deason, Rebecca

2018-01-01

The authors represent the life cycle of the butterfly through writing, drawing, dance, and math. The Next Generation Science Standards (NGSS) (NGSS Lead States 2013) emphasize college and career readiness as well as critical thinking and problem-solving skills. Students must develop a deep understanding of science concepts and engage in scientific…

Intimacy and Ethical Action in Adult Education

ERIC Educational Resources Information Center

Plumb, Donovan

2009-01-01

This article suggests that thinking about the nature of intimacy, especially sexual intimacy, is a good way of deepening our understanding of how deep-seated psychic vulnerabilities play an important role in adult education contexts. Drawing on psychoanalytic accounts of human development, the paper outlines how the capacity for ethical action in…

Into the Deep: Mindful Music Learning

ERIC Educational Resources Information Center

Lind, Vicki R.

2014-01-01

This article outlines strategies for using thinking routines in the general music classroom to foster deeper learning. Based on the Artful Thinking program, a model developed by Harvard's Project Zero in collaboration with Traverse City [Michigan] Area Public Schools, thinking routines were developed to draw students into a more meaningful…

R2R--software to speed the depiction of aesthetic consensus RNA secondary structures.

PubMed

Weinberg, Zasha; Breaker, Ronald R

2011-01-04

With continuing identification of novel structured noncoding RNAs, there is an increasing need to create schematic diagrams showing the consensus features of these molecules. RNA structural diagrams are typically made either with general-purpose drawing programs like Adobe Illustrator, or with automated or interactive programs specific to RNA. Unfortunately, the use of applications like Illustrator is extremely time consuming, while existing RNA-specific programs produce figures that are useful, but usually not of the same aesthetic quality as those produced at great cost in Illustrator. Additionally, most existing RNA-specific applications are designed for drawing single RNA molecules, not consensus diagrams. We created R2R, a computer program that facilitates the generation of aesthetic and readable drawings of RNA consensus diagrams in a fraction of the time required with general-purpose drawing programs. Since the inference of a consensus RNA structure typically requires a multiple-sequence alignment, the R2R user annotates the alignment with commands directing the layout and annotation of the RNA. R2R creates SVG or PDF output that can be imported into Adobe Illustrator, Inkscape or CorelDRAW. R2R can be used to create consensus sequence and secondary structure models for novel RNA structures or to revise models when new representatives for known RNA classes become available. Although R2R does not currently have a graphical user interface, it has proven useful in our efforts to create 100 schematic models of distinct noncoding RNA classes. R2R makes it possible to obtain high-quality drawings of the consensus sequence and structural models of many diverse RNA structures with a more practical amount of effort. R2R software is available at http://breaker.research.yale.edu/R2R and as an Additional file.

Google DeepMind and healthcare in an age of algorithms.

PubMed

Powles, Julia; Hodson, Hal

2017-01-01

Data-driven tools and techniques, particularly machine learning methods that underpin artificial intelligence, offer promise in improving healthcare systems and services. One of the companies aspiring to pioneer these advances is DeepMind Technologies Limited, a wholly-owned subsidiary of the Google conglomerate, Alphabet Inc. In 2016, DeepMind announced its first major health project: a collaboration with the Royal Free London NHS Foundation Trust, to assist in the management of acute kidney injury. Initially received with great enthusiasm, the collaboration has suffered from a lack of clarity and openness, with issues of privacy and power emerging as potent challenges as the project has unfolded. Taking the DeepMind-Royal Free case study as its pivot, this article draws a number of lessons on the transfer of population-derived datasets to large private prospectors, identifying critical questions for policy-makers, industry and individuals as healthcare moves into an algorithmic age.

Comfort drawing during investigative interviews: evidence of the safety of a popular practice.

PubMed

Poole, Debra Ann; Dickinson, Jason J

2014-02-01

This study evaluated the impact of comfort drawing (allowing children to draw during interviews) on the quality of children's eyewitness reports. Children (N=219, 5 to 12 years) who had participated in an earlier memory study returned 1 or 2 years later, experienced a new event, and described these events during phased, investigative-style interviews. Interviewers delivered the same prompts to children in the no drawing and drawing conditions but provided paper and markers in the drawing condition, invited these children to draw, and periodically asked if they would like to make another picture. Most children in the drawing condition were interested in using the materials, and measures of eyewitness performance were sensitive to differences in cognitive ability (i.e., age) and task difficulty (i.e., delay between the remote event and interview). Comfort drawing had no overall impact as evidenced by nonsignificant main effects of condition across 20 performance measures, although more of the younger children reported experienced touching in the drawing than no drawing condition. The children successfully divided attention between voluntary drawing and conversations about past events. Importantly, comfort drawing did not impair the amount of information recalled, the accuracy of children's answers, or even the extent to which interviewers needed to prompt for answers. Due to the large number of analyses, the benefit of drawing for younger, touched children requires replication. Comfort drawing poses no documented risks for typically-developing school-aged children, but the practice remains untested for younger children and those with cognitive impairments. Copyright © 2013 Elsevier Ltd. All rights reserved.

Testing for Controlled Rapid Pressurization

DOE Data Explorer

Steven Knudsen

2014-09-03

Borehole W1 is a NQ core hole drilled at our test site in Socorro. The rock is rhyolite. Borehole W1 which was used to test gas-gas explosive mixtures is 55 feet deep with casing (pinkish in the drawing) set to 35 feet. The model is a representation of the borehole and the holes we cored around the central borehole after the test. The brown colored core holes showed dye when we filled W1 with water and slightly pressurized it. This indicates there was some path between W1 and the colored core hole. The core holes are shown to their TD in the drawing. The green plane is a fracture plane which we believe is the result of the explosions of the gas mixture in W1. Data resource is a 2D .pdf Solid Works Drawing of borehole w-1

Reliability and Validity of the Interactive Drawing Test: A Measure of Reciprocity for Children and Adolescents with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Backer van Ommeren, Tineke; Koot, Hans M.; Scheeren, Anke M.; Begeer, Sander

2015-01-01

Poor reciprocity is a defining feature of an autism spectrum disorder (ASD). In the current study, we examined the reliability and validity of the Interactive Drawing Test (IDT), a new instrument to assess reciprocal behavior. The IDT was administered to children and adolescents with ASD (n = 131) and to a typically developing group (n = 62). The…

15. Photographic copy of ink on linen drawing (at the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. Photographic copy of ink on linen drawing (at the archives of Niagara Mohawk Power Corporation, 300 Erie Boulevard West, Syracuse, New York 13202), strand, draftsman, October 3, 1923. Sheet 1-473, International Paper Company. Completing crest of dam. Section through the log chute (top); typical section through the dam (bottom). - Glens Falls Dam, 100' to 450' West of U.S. Route 9 Bridge Spanning Hudson River, Glens Falls, Warren County, NY

An EBSD Investigation of Ultrafine-Grain Titanium for Biomedical Applications

DTIC Science & Technology

2015-09-21

angular pressing (ECAP) using a Conform scheme followed by rod drawing. The microstructure was found to be bimodal consisting of relatively coarse...produced for medical implants. The UFG ma- terial was obtained by equal channel angular pressing (ECAP) using a Conform scheme followed by rod drawing...1–6]. The method is based on severe plastic deformation (SPD) and typically includes warm equal-channel angular pressing (ECAP) followed by ether cold

Mechanism of saline groundwater migration under the influence of deep groundwater exploitation in the North China Plain

NASA Astrophysics Data System (ADS)

Han, D.; Cao, G.; Currell, M. J.

2016-12-01

Understanding the mechanism of salt water transport in response to the exploitation of deep freshwater has long been one of the major regional environmental hydrogeological problems and scientific challenges in the North China Plain. It is also the key to a correct understanding of the sources of deep groundwater pumpage. This study will look at the Hengshui - Cangzhou region as a region with typical vertical salt water distribution, and high levels of groundwater exploitation, integrating a variety of techniques in geology, hydrogeology, geophysics, hydrodynamics, and hydrochemistry - stable isotopes. Information about the problem will be determined using multiple lines of evidence, including field surveys of drilling and water sampling, as well as laboratory experiments and physical and numerical simulations. The project will characterize and depict the migration characteristics of salt water bodies and their relationship with the geological structure and deep ground water resources. The work will reveal the freshwater-saltwater interface shape; determine the mode and mechanism of hydrodynamic transport and salt transport; estimate the vertical migration time of salt water in a thick aquitard; and develop accurate hydrogeological conceptual models. This work will utilize groundwater variable density flow- solute transport numerical models to simulate the water and salt transport processes in vertical one-dimensional (typical bore) and two-dimensional (typical cross-section) space. Both inversion of the downward movement of saltwater caused by groundwater exploitation through history, and examining future saltwater migration trends under groundwater exploitation scenarios will be conducted, to quantitatively evaluate the impact of salt water migration to the deep groundwater body in the North China Plain. The research results will provide a scientific basis for the sustainable utilization of deep groundwater resources in this area.

Atypical resource allocation may contribute to many aspects of autism

PubMed Central

Goldknopf, Emily J.

2013-01-01

Based on a review of the literature and on reports by people with autism, this paper suggests that atypical resource allocation is a factor that contributes to many aspects of autism spectrum conditions, including difficulties with language and social cognition, atypical sensory and attentional experiences, executive and motor challenges, and perceptual and conceptual strengths and weaknesses. Drawing upon resource theoretical approaches that suggest that perception, cognition, and action draw upon multiple pools of resources, the approach hypothesizes that compared with resources in typical cognition, resources in autism are narrowed or reduced, especially in people with strong sensory symptoms. In narrowed attention, resources are restricted to smaller areas and to fewer modalities, stages of processing, and cognitive processes than in typical cognition; narrowed resources may be more intense than in typical cognition. In reduced attentional capacity, overall resources are reduced; resources may be restricted to fewer modalities, stages of processing, and cognitive processes than in typical cognition, or the amount of resources allocated to each area or process may be reduced. Possible neural bases of the hypothesized atypical resource allocation, relations to other approaches, limitations, and tests of the hypotheses are discussed. PMID:24421760

Characterization of Tensile Properties, Limiting Strains, and Deep Drawing Behavior of AA5754-H22 Sheet at Elevated Temperature

NASA Astrophysics Data System (ADS)

Panicker, Sudhy S.; Singh, Har Govind; Panda, Sushanta Kumar; Dashwood, Richard

2015-11-01

Automotive industries are very much interested in characterization of formability improvement of aluminum alloys at elevated temperatures before designing tools, heating systems, and processing sequences for fabrication of auto-body panels by warm forming technology. In this study, tensile tests of AA5754-H22 aluminum alloy were carried out at five different temperatures and three different strain rates to investigate the deformation behavior correlating with Cowper-Symonds constitutive equation. Laboratory scale warm forming facilities were designed and fabricated to perform limiting dome height and deep drawing tests to evaluate forming limit strains and drawability of sheet metal at different tool temperatures. The forming limit strain and dome height improved significantly when both the die and punch were heated to 200 °C. Remarkable improvement in deep drawn cup depth was observed when die and punch temperatures were maintained at 200 and 30 °C, respectively, producing a non-isothermal temperature gradient of approximately 93 °C across the blank from flange to center. The forming behavior at different isothermal and non-isothermal conditions were predicted successfully using a thermo-mechanical FE model incorporating temperature-dependent properties in Barlat-89 yield criterion coupled with Cowper-Symonds hardening model, and the thinning/failure location in deformed cups were validated implementing the experimental limiting strains as damage model.

Deep nursing: a thoughtful, co-created nursing process.

PubMed

Griffiths, Colin

2017-03-30

This article examines some of the challenges in nursing practice experienced by patients and nurses in the UK and Ireland, and considers some of the associated stressors in the system. Nurses must respond to these challenges by crafting their own practice, and the article offers a blueprint for developing personal nursing practice through acceptance, paying detailed attention to patients, taking time with patients and personal reflection. It draws on innovations in learning disability practice to suggest that care should be jointly thought through and co-created by patients and nurses, and that this process of thoughtful engagement constitutes 'deep nursing'.

The effects of running in place in a limited area with abdominal drawing-in maneuvers on abdominal muscle thickness in chronic low back pain patients.

PubMed

Gong, Wontae

2016-11-21

Based on previous studies indicating that core stabilization exercises accompanied by abdominal drawing-in maneuvers increase the thickness of the transversus abdominis muscle. The purpose of this study was to compare the measurements of abdominal muscle thicknesses during running in place in a limited area with the abdominal drawing-in maneuver. The study classified the subjects into two experimental groups: the training group (M = 2, F = 13), and the control group (M = 2, F = 13). The training group performed three sets of running in place in a limited area with abdominal drawing-in maneuvers each time, three times a week for six weeks. The abdominal muscle thicknesses of the subjects were measured using ultrasonography. Comparing the training group's abdominal muscle thickness before and after this study, there was a statistical significance in all of the external obliquus abdominis, the internal obliquus abdominis, and the transversus abdominis. In particular, thicknesses of external obliquus abdominis and internal obliquus increased remarkably. Running in place in a limited area accompanied by abdominal drawing-in maneuvers increased the thickness of the deep abdominal muscles that are the basis of trunk stabilization.

Evaluation of mechanisms that might control transport of wastewater contaminants in bedrock multi-aquifer systems

USDA-ARS?s Scientific Manuscript database

Ongoing research has identified infectious human enteric viruses in the Madison, Wisconsin, public supply wells that draw water from a deep, confined sandstone aquifer. These viruses most likely originate from leaking sanitary sewers and are a potential human health risk. Due to a relatively short (...

Digital Storytelling: Emotions in Higher Education

ERIC Educational Resources Information Center

Ribeiro, Sandra; Moreira, António; da Silva, Cristina Pinto

2014-01-01

In tandem with the deep structural changes that have taken place in society, education must also shift towards a teaching approach focused on learning and the overall development of the student. The integration of technology may be the drive to foster the needed changes. We draw on the literature of pertaining to the role of emotions and…

Drawing on Popular Culture: Using Tattooing to Introduce Biological Concepts

ERIC Educational Resources Information Center

Poli, DorothyBelle; Fleenor, Matthew; Rearick, Matthew

2012-01-01

Collaboration between two biologists and a physicist resulted in the example of tattooing being used as a motivator to support discussion across several scientific fields (cell biology, microbiology, human health, and physics). Although often viewed as self-destructive and rebellious in the Western world, tattooing has a deep and rich history full…

Learning Styles: Fashion Fad or Lever for Change? The Application of Learning Style Theory to Inclusive Curriculum Delivery.

ERIC Educational Resources Information Center

Smith, Jan

2002-01-01

Examines how four classifications of learning styles--field dependence/independence, holistic/sequential, styles linked to the experiential learning cycle, and "deep" and "surface" learning--relate to curriculum values. Draws on research at Sheffield Hallam University into the learning styles of General National Vocational…

Lumbo-pelvic joint protection against antigravity forces: motor control and segmental stiffness assessed with magnetic resonance imaging.

PubMed

Richardson, C A; Hides, J A; Wilson, S; Stanton, W; Snijders, C J

2004-07-01

The antigravity muscles of the lumbo-pelvic region, especially transversus abdominis (TrA), are important for the protection and support of the weightbearing joints. Measures of TrA function (the response to the postural cue of drawing in the abdominal wall) have been developed and quantified using magnetic resonance imaging (MRI). Cross-sections through the trunk allowed muscle contraction as well as the large fascial attachments of the TrA to be visualized. The cross sectional area (CSA) of the deep musculo-fascial system was measured at rest and in the contracted state, using static images as well as a cine sequence. In this developmental study, MRI measures were undertaken on a small sample of low back pain (LBP) and non LBP subjects. Results demonstrated that, in non LBP subjects, the draw in action produced a symmetrical deep musculo-fascial "corset" which encircles the abdomen. This study demonstrated a difference in this "corset" measure between subjects with and without LBP. These measures may also prove useful to quantify the effect of unloading in bedrest and microgravity exposure.

Magnetic resonance imaging DTI-FT study on schizophrenic patients with typical negative first symptoms.

PubMed

Gu, Chengyu; Zhang, Ying; Wei, Fuquan; Cheng, Yougen; Cao, Yulin; Hou, Hongtao

2016-09-01

Magnetic resonance imaging (MRI) with diffusion-tensor imaging (DTI) together with a white matter fiber tracking (FT) technique was used to assess different brain white matter structures and functionalities in schizophrenic patients with typical first negative symptoms. In total, 30 schizophrenic patients with typical first negative symptoms, comprising an observation group were paired 1:1 according to gender, age, right-handedness, and education, with 30 healthy individuals in a control group. Individuals in each group underwent routine MRI and DTI examination of the brain, and diffusion-tensor tractography (DTT) data were obtained through whole brain analysis based on voxel and tractography. The results were expressed by fractional anisotropy (FA) values. The schizophrenic patients were evaluated using a positive and negative symptom scale (PANSS) as well as a Global Assessment Scale (GAS). The results of the study showed that routine MRIs identified no differences between the two groups. However, compared with the control group, the FA values obtained by DTT from the deep left prefrontal cortex, the right deep temporal lobe, the white matter of the inferior frontal gyrus and part of the corpus callosum were significantly lower in the observation group (P<0.05). The PANSS positive scale value in the observation group averaged 7.7±1.5, and the negative scale averaged 46.6±5.9, while the general psychopathology scale averaged 65.4±10.3, and GAS averaged 53.8±19.2. The Pearson statistical analysis, the left deep prefrontal cortex, the right deep temporal lobe, the white matter of the inferior frontal gyrus and the FA value of part of the corpus callosum in the observation group was negatively correlated with the negative scale (P<0.05), and positively correlated with GAS (P<0.05). In conclusion, a decrease in the FA values of the left deep prefrontal cortex, the right deep temporal lobe, the white matter of the inferior frontal gyrus and part of the corpus callosum may be associated with schizophrenia with typical first negative symptoms and the application of MRI DTI-FT can improve diagnostic accuracy.

DeepARG: a deep learning approach for predicting antibiotic resistance genes from metagenomic data.

PubMed

Arango-Argoty, Gustavo; Garner, Emily; Pruden, Amy; Heath, Lenwood S; Vikesland, Peter; Zhang, Liqing

2018-02-01

Growing concerns about increasing rates of antibiotic resistance call for expanded and comprehensive global monitoring. Advancing methods for monitoring of environmental media (e.g., wastewater, agricultural waste, food, and water) is especially needed for identifying potential resources of novel antibiotic resistance genes (ARGs), hot spots for gene exchange, and as pathways for the spread of ARGs and human exposure. Next-generation sequencing now enables direct access and profiling of the total metagenomic DNA pool, where ARGs are typically identified or predicted based on the "best hits" of sequence searches against existing databases. Unfortunately, this approach produces a high rate of false negatives. To address such limitations, we propose here a deep learning approach, taking into account a dissimilarity matrix created using all known categories of ARGs. Two deep learning models, DeepARG-SS and DeepARG-LS, were constructed for short read sequences and full gene length sequences, respectively. Evaluation of the deep learning models over 30 antibiotic resistance categories demonstrates that the DeepARG models can predict ARGs with both high precision (> 0.97) and recall (> 0.90). The models displayed an advantage over the typical best hit approach, yielding consistently lower false negative rates and thus higher overall recall (> 0.9). As more data become available for under-represented ARG categories, the DeepARG models' performance can be expected to be further enhanced due to the nature of the underlying neural networks. Our newly developed ARG database, DeepARG-DB, encompasses ARGs predicted with a high degree of confidence and extensive manual inspection, greatly expanding current ARG repositories. The deep learning models developed here offer more accurate antimicrobial resistance annotation relative to current bioinformatics practice. DeepARG does not require strict cutoffs, which enables identification of a much broader diversity of ARGs. The DeepARG models and database are available as a command line version and as a Web service at http://bench.cs.vt.edu/deeparg .

27. Photographic copy of ink on linen drawing (at the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

27. Photographic copy of ink on linen drawing (at the archives of Niagara Mohawk Power Corporation, 300 Eric Boulevard West, Syracuse, New York 13202), Strand, Draftsman, July 3, 1913. Sheet 1-260, Finch, Pruyn & Company and International Paper Company. Detail of concrete dam and headgate wall. Detail showing typical cross section through the dam. - Glens Falls Dam, 100' to 450' West of U.S. Route 9 Bridge Spanning Hudson River, Glens Falls, Warren County, NY

Functional diversity patterns of abyssal nematodes in the Eastern Mediterranean: A comparison between cold seeps and typical deep sea sediments

NASA Astrophysics Data System (ADS)

Kalogeropoulou, V.; Keklikoglou, K.; Lampadariou, N.

2015-04-01

Spatial patterns in deep sea nematode biological trait composition and functional diversity were investigated between chemosynthetic and typical deep sea ecosystems as well as between different microhabitats within the chemosynthetic ecosystems, in the Eastern Mediterranean. The chemosynthetic ecosystems chosen were two mud volcanoes, Napoli at 1950 m depth and Amsterdam at 2040 m depth which are cold seeps characterized by high chemosynthetic activity and spatial heterogeneity. Typical deep sea ecosystems consisted of fine-grained silt-clay sediments which were collected from three areas located in the south Ionian Sea at 2765 to 2840 m depth, the southern Cretan margin at 1089 to 1998 m depth and the Levantine Sea at 3055 to 3870 m depth. A range of biological traits (9 traits; 31 categories) related to buccal morphology, tail shape, body size, body shape, life history strategy, sediment position, cuticle morphology, amphid shape and presence of somatic setae were combined to identify patterns in the functional composition of nematode assemblages between the two habitats, the two mud volcanoes (macroscale) and between the microhabitats within the mud volcanoes (microscale). Data on trait correspondence was provided by biological information on species and genera. A total of 170 nematode species were allocated in 67 different trait combinations, i.e. functional groups, based on taxonomic, morphological and behavioral characteristics. The Biological Trait Analysis (BTA) revealed significant differences between the mud volcanoes and the typical deep sea sediments indicating the presence of different biological functions in ecologically very different environments. Moreover, chemosynthetic activity and habitat heterogeneity within mud volcanoes enhance the presence of different biological and ecological functions in nematode assemblages of different microhabitats. Functional diversity and species richness patterns varied significantly across the different environmental gradients prevailing in the study areas. Biological trait analysis, with the addition of newly introduced trait categories, and functional diversity outcomes provided greater explanatory power of ecosystem functioning than species richness and taxonomic diversity.

Deep smarts.

PubMed

Leonard, Dorothy; Swap, Walter

2004-09-01

When a person sizes up a complex situation and rapidly comes to a decision that proves to be not just good but brilliant, you think, "That was smart." After you watch him do this a few times, you realize you're in the presence of something special. It's not raw brainpower, though that helps. It's not emotional intelligence, either, though that, too, is often involved. It's deep smarts. Deep smarts are not philosophical--they're not"wisdom" in that sense, but they're as close to wisdom as business gets. You see them in the manager who understands when and how to move into a new international market, in the executive who knows just what kind of talk to give when her organization is in crisis, in the technician who can track a product failure back to an interaction between independently produced elements. These are people whose knowledge would be hard to purchase on the open market. Their insight is based on know-how more than on know-what; it comprises a system view as well as expertise in individual areas. Because deep smarts are experienced based and often context specific, they can't be produced overnight or readily imported into an organization. It takes years for an individual to develop them--and no time at all for an organization to lose them when a valued veteran walks out the door. They can be taught, however, with the right techniques. Drawing on their forthcoming book Deep Smarts, Dorothy Leonard and Walter Swap say the best way to transfer such expertise to novices--and, on a larger scale, to make individual knowledge institutional--isn't through PowerPoint slides, a Web site of best practices, online training, project reports, or lectures. Rather, the sage needs to teach the neophyte individually how to draw wisdom from experience. Companies have to be willing to dedicate time and effort to such extensive training, but the investment more than pays for itself.

Cognitive predictors of copying and drawing from memory of the Rey-Osterrieth complex figure in 7- to 10-year-old children.

PubMed

Senese, Vincenzo Paolo; De Lucia, Natascia; Conson, Massimiliano

2015-01-01

Cognitive models of drawing are mainly based on assessment of copying performance of adults, whereas only a few studies have verified these models in young children. Moreover, developmental investigations have only rarely performed a systematic examination of the contribution of perceptual and representational visuo-spatial processes to copying and drawing from memory. In this study we investigated the role of visual perception and mental representation in both copying and drawing from memory skills in a sample of 227 typically developing children (53% females) aged 7-10 years. Participants underwent a neuropsychological assessment and the Rey-Osterrieth Complex Figure (ROCF). The fit and invariance of the predictive model considering visuo-spatial abilities, working memory, and executive functions were tested by means of hierarchical regressions and path analysis. Results showed that, in a gender invariant way, visual perception abilities and spatial mental representation had a direct effect on copying performance, whereas copying performance was the only specific predictor for drawing from memory. These effects were independent from age and socioeconomic status, and showed that cognitive models of drawing built up for adults could be considered for predicting copying and drawing from memory in children.

Experimental formability analysis of bondal sandwich sheet

NASA Astrophysics Data System (ADS)

Kami, Abdolvahed; Banabic, Dorel

2018-05-01

Metal/polymer/metal sandwich sheets have recently attracted the interests of industries like automotive industry. These sandwich sheets have superior properties over single-layer metallic sheets including good sound and vibration damping and light weight. However, the formability of these sandwich sheets should be enhanced which requires more research. In this paper, the formability of Bondal sheet (DC06/viscoelastic polymer/DC06 sandwich sheet) was studied through different types of experiments. The mechanical properties of Bondal were determined by uniaxial tensile tests. Hemispherical punch stretching and hydraulic bulge tests were carried out to determine the forming limit diagram (FLD) of Bondal. Furthermore, cylindrical and square cup drawing tests were performed in dry and oil lubricated conditions. These tests were conducted at different blank holding forces (BHFs). An interesting observation about Bondal sheet deep drawing was obtaining of higher drawing depths at dry condition in comparison with oil-lubricated condition.

Undercuts by Laser Shock Forming

NASA Astrophysics Data System (ADS)

Wielage, Hanna; Vollertsen, Frank

2011-05-01

In laser shock forming TEA-CO2-laser induced shock waves are used to form metal foils, such as aluminum or copper. The process utilizes an initiated plasma shock wave on the target surface, which leads to a forming of the foil. A challenge in forming technologies is the manufacturing of undercuts. By conventional forming methods these special forms are not feasible. In this article, it is presented that undercuts in the micro range can be produced by laser shock deep drawing. Different drawing die diameters, drawing die depths and the material aluminum in the thicknesses 20 and 50 μm were investigated. It will be presented that smaller die diameters facilitate undercuts compared to bigger die diameters. The phenomena can be explained by Barlow's formula. Furthermore, it is shown which maximum undercut depth at different die diameters can be reached. To this end, cross-sections of the different parameter combinations are displayed.

The Effect of Inappropriate Calibration: Three Case Studies in Molecular Ecology

PubMed Central

Ho, Simon Y. W.; Saarma, Urmas; Barnett, Ross; Haile, James; Shapiro, Beth

2008-01-01

Time-scales estimated from sequence data play an important role in molecular ecology. They can be used to draw correlations between evolutionary and palaeoclimatic events, to measure the tempo of speciation, and to study the demographic history of an endangered species. In all of these studies, it is paramount to have accurate estimates of time-scales and substitution rates. Molecular ecological studies typically focus on intraspecific data that have evolved on genealogical scales, but often these studies inappropriately employ deep fossil calibrations or canonical substitution rates (e.g., 1% per million years for birds and mammals) for calibrating estimates of divergence times. These approaches can yield misleading estimates of molecular time-scales, with significant impacts on subsequent evolutionary and ecological inferences. We illustrate this calibration problem using three case studies: avian speciation in the late Pleistocene, the demographic history of bowhead whales, and the Pleistocene biogeography of brown bears. For each data set, we compare the date estimates that are obtained using internal and external calibration points. In all three cases, the conclusions are significantly altered by the application of revised, internally-calibrated substitution rates. Collectively, the results emphasise the importance of judicious selection of calibrations for analyses of recent evolutionary events. PMID:18286172

The effect of inappropriate calibration: three case studies in molecular ecology.

PubMed

Ho, Simon Y W; Saarma, Urmas; Barnett, Ross; Haile, James; Shapiro, Beth

2008-02-20

Time-scales estimated from sequence data play an important role in molecular ecology. They can be used to draw correlations between evolutionary and palaeoclimatic events, to measure the tempo of speciation, and to study the demographic history of an endangered species. In all of these studies, it is paramount to have accurate estimates of time-scales and substitution rates. Molecular ecological studies typically focus on intraspecific data that have evolved on genealogical scales, but often these studies inappropriately employ deep fossil calibrations or canonical substitution rates (e.g., 1% per million years for birds and mammals) for calibrating estimates of divergence times. These approaches can yield misleading estimates of molecular time-scales, with significant impacts on subsequent evolutionary and ecological inferences. We illustrate this calibration problem using three case studies: avian speciation in the late Pleistocene, the demographic history of bowhead whales, and the Pleistocene biogeography of brown bears. For each data set, we compare the date estimates that are obtained using internal and external calibration points. In all three cases, the conclusions are significantly altered by the application of revised, internally-calibrated substitution rates. Collectively, the results emphasise the importance of judicious selection of calibrations for analyses of recent evolutionary events.

DR Reactor VSR channel damage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kempf, F.J.; Rawlins, J.K.

1961-10-30

On July 11, 1961 the Ball 3X System at DR Reactor was inadventently tripped. All vertical safety rods dropped and all channels were filled with balls. This report has the twofold purpose of documenting borescope observations of ten vertical rod channels at DR Reactor and recording the estimated extent of graphite damage resulting from the above incident. Channel damage data are presented on appended drawings. With suitable notations, the tracings of these drawings may be revised to reflect any future graphite damage. All vertical rod channels at DR Reactor were visually examined with a closed circuit television system during ballmore » removal efforts. Typical photographs of trapped balls and ledges, as viewed on the television monitor, are shown. Photographs of typical graphite damage, obtained through the borescope are also included in this report. 3 refs., 8 figs., 1 tab.« less

Cognitive Bargaining Model: An Analysis Tool for Third Party Incentives?

DTIC Science & Technology

2009-12-01

catalytic by reducing any rally-around-the-flag effect in the target state, bolstering the business class (“commercial bourgeoisie ”), which typically is...9. 136 “Donors Drawing Up Plans for CIS Aid,” Agence France Presse, May 23, 1992. 137 RusData Dialine, “USA—Ukraine: Buy Anytime You Like,” BizEkon...2009). Agence France Presse. “Donors Drawing Up Plans for CIS Aid.” May 23, 1992. Aslund, Anders. How Ukraine Became a Market Economy and

Open Space: Nurturing Reflection, Dialogue, and Radical Listening in Higher Education

ERIC Educational Resources Information Center

Bach, Dorothe J.; Cook-Sather, Alison

2016-01-01

This article is about and for teachers wishing to open space at the intersection of the affective and the cognitive-space, we argue, that is particularly conducive to deep learning and within which students can empower themselves as learners and knowers. Drawing on written and spoken reflections of three faculty members, the authors explore how…

A Study of Secondary School English Teachers' Beliefs in the Context of Curriculum Reform in China

ERIC Educational Resources Information Center

Zhang, Fengjuan; Liu, Yongbing

2014-01-01

This study examines the beliefs of Chinese junior high school English teachers about foreign language teaching and influencing contextual factors in a time when curriculum innovation is confronting deep-rooted cultural traditions and complex teaching realities. Drawing upon data collected by means of questionnaires and interviews, this study…

Preservice Elementary Teachers Use Drawings and Make Sets of Materials to Explain Multiplication and Division by Fractions

ERIC Educational Resources Information Center

Rule, Audrey C., Ed.; Hallagan, Jean E., Ed.

2006-01-01

Background: Multiplication and division by fractions are among the most troublesome concepts in the elementary mathematics curriculum. Recent studies have shown that preservice elementary teachers in the United States do not have deep understandings of these concepts. Effective ways to improve preservice teachers' conceptual understanding of these…

America's Forgotten Children: Child Poverty in Rural America.

ERIC Educational Resources Information Center

Nadel, Wendy; Sagawa, Shirley

This report draws on research, statistics, and the voices of rural young people to document the extent and causes of rural child poverty, and related problems and reasons for hope in specific focus areas. About 2.5 million rural children are chronically poor. Rural poverty is concentrated in central Appalachia, the deep South, the U.S.-Mexican…

Ethnography as Method, Methodology, and "Deep Theorizing" Closing the Gap between Text and Context in Academic Writing Research

ERIC Educational Resources Information Center

Lillis, Theresa

2008-01-01

This article critically explores the value of ethnography for enhancing context-sensitive approaches to the study of academic writing. Drawing on data from two longitudinal studies, student writing in the United Kingdom and professional academic writing in Hungary, Slovakia, Spain, and Portugal, the author illustrates the different contributions…

Tilting at Windmills: School Reform, San Diego, and America?s Race to Renew Public Education

ERIC Educational Resources Information Center

Colvin, Richard Lee

2013-01-01

A book that draws equally on Richard Lee Colvin's deep acquaintance with contemporary education reform and the unique circumstances of the San Diego experience, "Tilting at Windmills" is a penetrating and invaluable account of Alan Bersin's contentious superintendency. Between 1998, when Alan Bersin became superintendent of the San Diego…

"Most Learn Almost Nothing": Building Democratic Citizenship by Engaging Controversial History through Inquiry in Post-Communist Europe

ERIC Educational Resources Information Center

Misco, Thomas

2011-01-01

This article addresses the challenges and pathways of Holocaust education in post-communist countries through two case studies. I first examine historiographical, institutional and cultural obstacles to deep and meaningful treatments of the Holocaust within Latvian and Romanian schools. Drawing upon the unique experiences both countries had with…

Hydrostatic collapse research in support of the Oman India gas pipeline

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stark, P.R.; McKeehan, D.S.

1995-12-01

This paper provides a summary of the collapse test program conducted as part of the technical development for the Ultra Deep Oman to India Pipeline. The paper describes the motivation for conducting the collapse test program, outlines the test objectives and procedures, presents the results obtained, and draws conclusions on the factors affecting collapse resistance.

Characterization of dissolved solids in water resources of agricultural lands near Manila, Utah, 2004-05

USGS Publications Warehouse

Gerner, Steven J.; Spangler, L.E.; Kimball, B.A.; Naftz, D.L.

2006-01-01

Agricultural lands near Manila, Utah, have been identified as contributing dissolved solids to Flaming Gorge Reservoir. Concentrations of dissolved solids in water resources of agricultural lands near Manila, Utah, ranged from 35 to 7,410 milligrams per liter. The dissolved-solids load in seeps and drains in the study area that discharge to Flaming Gorge Reservoir ranged from less than 0.1 to 113 tons per day. The most substantial source of dissolved solids discharging from the study area to the reservoir was Birch Spring Draw. The mean daily dissolved-solids load near the mouth of Birch Spring Draw was 65 tons per day.The estimated annual dissolved-solids load imported to the study area by Sheep Creek and Peoples Canals is 1,330 and 13,200 tons, respectively. Daily dissolved-solid loads discharging to the reservoir from the study area, less the amount of dissolved solids imported by canals, for the period July 1, 2004, to June 30, 2005, ranged from 72 to 241 tons per day with a mean of 110 tons per day. The estimated annual dissolved-solids load discharging to the reservoir from the study area, less the amount of dissolved solids imported by canals, for the same period was 40,200 tons. Of this 40,200 tons of dissolved solids, about 9,000 tons may be from a regional source that is not associated with agricultural activities. The salt-loading factor is 3,670 milligrams per liter or about 5.0 tons of dissolved solids per acre-foot of deep percolation in Lucerne Valley and 1,620 milligrams per liter or 2.2 tons per acre-foot in South Valley.The variation of δ87Sr with strontium concentration indicates some general patterns that help to define a conceptual model of the processes affecting the concentration of strontium and the δ87Sr isotopic ratio in area waters. As excess irrigation water percolates through soils derived from Mancos Shale, the δ87Sr isotopic ratio (0.21 to 0.69 permil) approaches one that is typical of deep percolation from irrigation on Mancos Shale. The boron concentration and δ11B value for the water sample from Antelope Wash, being distinctly different from water samples from other sites, is evidence that water in Antelope Wash may contain a substantial component of regional ground-water flow.

R2R - software to speed the depiction of aesthetic consensus RNA secondary structures

PubMed Central

2011-01-01

Background With continuing identification of novel structured noncoding RNAs, there is an increasing need to create schematic diagrams showing the consensus features of these molecules. RNA structural diagrams are typically made either with general-purpose drawing programs like Adobe Illustrator, or with automated or interactive programs specific to RNA. Unfortunately, the use of applications like Illustrator is extremely time consuming, while existing RNA-specific programs produce figures that are useful, but usually not of the same aesthetic quality as those produced at great cost in Illustrator. Additionally, most existing RNA-specific applications are designed for drawing single RNA molecules, not consensus diagrams. Results We created R2R, a computer program that facilitates the generation of aesthetic and readable drawings of RNA consensus diagrams in a fraction of the time required with general-purpose drawing programs. Since the inference of a consensus RNA structure typically requires a multiple-sequence alignment, the R2R user annotates the alignment with commands directing the layout and annotation of the RNA. R2R creates SVG or PDF output that can be imported into Adobe Illustrator, Inkscape or CorelDRAW. R2R can be used to create consensus sequence and secondary structure models for novel RNA structures or to revise models when new representatives for known RNA classes become available. Although R2R does not currently have a graphical user interface, it has proven useful in our efforts to create 100 schematic models of distinct noncoding RNA classes. Conclusions R2R makes it possible to obtain high-quality drawings of the consensus sequence and structural models of many diverse RNA structures with a more practical amount of effort. R2R software is available at http://breaker.research.yale.edu/R2R and as an Additional file. PMID:21205310

Obtaining manufactured geometries of deep-drawn components through a model updating procedure using geometric shape parameters

NASA Astrophysics Data System (ADS)

Balla, Vamsi Krishna; Coox, Laurens; Deckers, Elke; Plyumers, Bert; Desmet, Wim; Marudachalam, Kannan

2018-01-01

The vibration response of a component or system can be predicted using the finite element method after ensuring numerical models represent realistic behaviour of the actual system under study. One of the methods to build high-fidelity finite element models is through a model updating procedure. In this work, a novel model updating method of deep-drawn components is demonstrated. Since the component is manufactured with a high draw ratio, significant deviations in both profile and thickness distributions occurred in the manufacturing process. A conventional model updating, involving Young's modulus, density and damping ratios, does not lead to a satisfactory match between simulated and experimental results. Hence a new model updating process is proposed, where geometry shape variables are incorporated, by carrying out morphing of the finite element model. This morphing process imitates the changes that occurred during the deep drawing process. An optimization procedure that uses the Global Response Surface Method (GRSM) algorithm to maximize diagonal terms of the Modal Assurance Criterion (MAC) matrix is presented. This optimization results in a more accurate finite element model. The advantage of the proposed methodology is that the CAD surface of the updated finite element model can be readily obtained after optimization. This CAD model can be used for carrying out analysis, as it represents the manufactured part more accurately. Hence, simulations performed using this updated model with an accurate geometry, will therefore yield more reliable results.

Deep tissue massage: What are we talking about?

PubMed

Koren, Yogev; Kalichman, Leonid

2018-04-01

Massage is a common treatment in complementary and integrative medicine. Deep tissue massage, a form of therapeutic massage, has become more and more popular in recent years. Hence, the use of massage generally and deep tissue massage specifically, should be evaluated as any other modality of therapy to establish its efficacy and safety. To determine the definitions used for deep tissue massage in the scientific literature and to review the current scientific evidence for its efficacy and safety. Narrative review. There is no commonly accepted definition of deep tissue massage in the literature. The definition most frequently used is the intention of the therapist. We suggest separating the definitions of deep massage and deep tissue massage as follows: deep massage should be used to describe the intention of the therapist to treat deep tissue by using any form of massage and deep tissue massage should be used to describe a specific and independent method of massage therapy, utilizing the specific set of principles and techniques as defined by Riggs: "The understanding of the layers of the body, and the ability to work with tissue in these layers to relax, lengthen, and release holding patterns in the most effective and energy efficient way possible within the client's parameters of comfort". Heterogeneity of techniques and protocols used in published studies have made it difficult to draw any clear conclusions. Favorable outcomes may result from deep tissue massage in pain populations and patients with decreased range of motion. In addition, several rare serious adverse events were found related to deep tissue massage, probably as a result of the forceful application of massage therapy. Future research of deep tissue massage should be based on a common definition, classification system and the use of common comparators as controls. Copyright © 2017 Elsevier Ltd. All rights reserved.

A magnetic resonance imaging investigation of the transversus abdominis muscle during drawing-in of the abdominal wall in elite Australian Football League players with and without low back pain.

PubMed

Hides, Julie A; Boughen, Carly L; Stanton, Warren R; Strudwick, Mark W; Wilson, Stephen J

2010-01-01

Single-blinded quasi-experimental study. To investigate the ability of elite football players with and without low back pain (LBP) to voluntarily draw-in the abdominal wall. While there has been considerable debate regarding the contribution of the transversus abdominis (TrA) muscle to control the lumbar spine and pelvis, there is evidence that retraining motor control of the deep trunk muscles is commensurate with decreases in LBP. Magnetic resonance imaging (MRI) has been used to assess the TrA muscle during the draw-in maneuver, with the contraction of the TrA muscle reducing the circumference of the trunk. Impairments in performance of the draw-in maneuver have been shown in people with LBP. Forty-three elite players from a team in the Australian Football League were allocated to 3 groups: those with "no LBP," "a history of LBP but no current LBP," or "current LBP." MRI was used to image the cross-sectional area (CSA) of the trunk at the level of the L3-4 disc at the start and end of the draw-in maneuver. There was a significant decrease in the CSA of the trunk with the performance of the draw-in maneuver (P<.001). Subjects in the "no LBP" group were better able to "draw-in" the abdominal wall than subjects with current LBP (P = .015). This study provides evidence of an altered ability to draw-in the abdominal wall in footballers with current LBP. Retraining contraction of the TrA muscle may constitute one part of an exercise-therapy approach for athletes with current LBP.

Robotic end gripper with a band member to engage object

DOEpatents

Pollard, Roy E.; Robinson, Samuel C.; Thompson, William F.; Couture, Scott A.; Sutton, Bill J.

1994-01-01

An end effector for use with robotic arms and like devices that utilizes a flexible band to draw an object against an anvil having a concave surface. One typical convex surface is created by a V-block, with an apex of the V being centrally located. If an object to be grasped is fragile, the contour of the concave surface closely matches the surface of the object. Typically the movement of the band is effected by a linear actuator, with the anvil remaining fixed relative to a support base. Several embodiments are described that utilize variations in drawing the band toward the anvil, with one of these embodiments described in detail in the form of a fabricated unit. One embodiment includes a cover element that can be moved over an object after the grasping thereof, with this cover potentially serving various functions. Movement of the cover can be effected with a second linear actuator.

Deep Recurrent Neural Networks for Human Activity Recognition

PubMed Central

Murad, Abdulmajid

2017-01-01

Adopting deep learning methods for human activity recognition has been effective in extracting discriminative features from raw input sequences acquired from body-worn sensors. Although human movements are encoded in a sequence of successive samples in time, typical machine learning methods perform recognition tasks without exploiting the temporal correlations between input data samples. Convolutional neural networks (CNNs) address this issue by using convolutions across a one-dimensional temporal sequence to capture dependencies among input data. However, the size of convolutional kernels restricts the captured range of dependencies between data samples. As a result, typical models are unadaptable to a wide range of activity-recognition configurations and require fixed-length input windows. In this paper, we propose the use of deep recurrent neural networks (DRNNs) for building recognition models that are capable of capturing long-range dependencies in variable-length input sequences. We present unidirectional, bidirectional, and cascaded architectures based on long short-term memory (LSTM) DRNNs and evaluate their effectiveness on miscellaneous benchmark datasets. Experimental results show that our proposed models outperform methods employing conventional machine learning, such as support vector machine (SVM) and k-nearest neighbors (KNN). Additionally, the proposed models yield better performance than other deep learning techniques, such as deep believe networks (DBNs) and CNNs. PMID:29113103

Deep Recurrent Neural Networks for Human Activity Recognition.

PubMed

Murad, Abdulmajid; Pyun, Jae-Young

2017-11-06

Adopting deep learning methods for human activity recognition has been effective in extracting discriminative features from raw input sequences acquired from body-worn sensors. Although human movements are encoded in a sequence of successive samples in time, typical machine learning methods perform recognition tasks without exploiting the temporal correlations between input data samples. Convolutional neural networks (CNNs) address this issue by using convolutions across a one-dimensional temporal sequence to capture dependencies among input data. However, the size of convolutional kernels restricts the captured range of dependencies between data samples. As a result, typical models are unadaptable to a wide range of activity-recognition configurations and require fixed-length input windows. In this paper, we propose the use of deep recurrent neural networks (DRNNs) for building recognition models that are capable of capturing long-range dependencies in variable-length input sequences. We present unidirectional, bidirectional, and cascaded architectures based on long short-term memory (LSTM) DRNNs and evaluate their effectiveness on miscellaneous benchmark datasets. Experimental results show that our proposed models outperform methods employing conventional machine learning, such as support vector machine (SVM) and k-nearest neighbors (KNN). Additionally, the proposed models yield better performance than other deep learning techniques, such as deep believe networks (DBNs) and CNNs.

[The design and implementation of the web typical surface object spectral information system in arid areas based on .NET and SuperMap].

PubMed

Xia, Jun; Tashpolat, Tiyip; Zhang, Fei; Ji, Hong-jiang

2011-07-01

The characteristic of object spectrum is not only the base of the quantification analysis of remote sensing, but also the main content of the basic research of remote sensing. The typical surface object spectral database in arid areas oasis is of great significance for applied research on remote sensing in soil salinization. In the present paper, the authors took the Ugan-Kuqa River Delta Oasis as an example, unified .NET and the SuperMap platform with SQL Server database stored data, used the B/S pattern and the C# language to design and develop the typical surface object spectral information system, and established the typical surface object spectral database according to the characteristics of arid areas oasis. The system implemented the classified storage and the management of typical surface object spectral information and the related attribute data of the study areas; this system also implemented visualized two-way query between the maps and attribute data, the drawings of the surface object spectral response curves and the processing of the derivative spectral data and its drawings. In addition, the system initially possessed a simple spectral data mining and analysis capabilities, and this advantage provided an efficient, reliable and convenient data management and application platform for the Ugan-Kuqa River Delta Oasis's follow-up study in soil salinization. Finally, It's easy to maintain, convinient for secondary development and practically operating in good condition.

But How Do We Learn? Talking to Vietnamese Children about How They Learn in and out of School

ERIC Educational Resources Information Center

Phelps, Renata; Nhung, Ha Thi Tuyet; Graham, Anne; Geeves, Richard

2012-01-01

Vietnam is currently striving to introduce more child-centred approaches to pedagogy. From a Western perspective, child-centred education requires teachers to perceive children as capable, active partners in learning and to develop deep understandings of their students, including the variety of ways in which they learn. This paper draws from a…

Lifelong Learning Theory and Pre-Service Teachers' Development of Knowledge and Dispositions to Work with Australian Aboriginal Students

ERIC Educational Resources Information Center

Bennet, Maria; Moriarty, Beverley

2016-01-01

This article draws on previous research by the authors and others as well as lifelong learning theory to argue the case for providing pre-service teachers with deep and meaningful experiences over time that help them to build their personal capacity for developing knowledge and dispositions to work with Australian Aboriginal students, their…

Policy Critics and Policy Survivors: Who Are They and How Do They Contribute to a Department Policy Role Typology?

ERIC Educational Resources Information Center

Golding, Jennie

2017-01-01

This paper considers the policy "roles" adopted by teachers enacting policy in a department. It draws on a longitudinal study of two secondary mathematics departments endeavouring to make deep change aligned with a demanding curriculum policy. The study validates aspects of an existing typology, demonstrates the existence of a variety of…

Including Families and Communities in Urban Education. Issues in the Research, Theory, Policy, and Practice of Urban Education

ERIC Educational Resources Information Center

Hands, Catherine, Ed.; Hubbard, Lea, Ed.

2011-01-01

The work of school, family and community partnerships is complex and messy and demands a thoughtful and deep investigation. Currently, parent and community involvement does not draw on school reform and educational change literature and conversely the school change literature often ignores the crucial role that communities play in educational…

Embedding Learning How to Learn in School Policy: The Challenge for Leadership

ERIC Educational Resources Information Center

Swaffield, Sue; MacBeath, John

2006-01-01

Achieving lasting and deep-seated change in schools through the embedding of a new set of practices with associated values is a familiar goal. This paper draws upon interviews with school coordinators and head teachers participating in the Learning How to Learn Project to explore the nature of embedding and the related challenges for leadership.…

Social Capital, Team Efficacy and Team Potency: The Mediating Role of Team Learning Behaviors

ERIC Educational Resources Information Center

van Emmerik, Hetty; Jawahar, I. M.; Schreurs, Bert; de Cuyper, Nele

2011-01-01

Purpose: Drawing on social capital theory and self-identification theory, this study aims to examine the associations of two indicators of social capital, personal networks and deep-level similarity, with team capability measures of team efficacy and team potency. The central focus of the study is to be the hypothesized mediating role of team…

"Anti-American Studies" in the Deep South: Dissenting Rhetorics, the Practice of Democracy, and Academic Freedom in Wartime Universities

ERIC Educational Resources Information Center

Powers, M. Karen; Chaput, Catherine

2007-01-01

Using Frederic Jameson, we outline concentric circles of the political unconscious structuring debates about academic freedom at the national and state levels. By drawing parallels between the World War I university and the contemporary university, we suggest that such circles function historically, always bearing traces of an earlier time. To…

Making Hope and History Rhyme: Reflections on Popular Education and Leadership Following a Visit to Highlander

ERIC Educational Resources Information Center

Connolly, Bríd; Finnegan, Fergal

2016-01-01

This article draws on our backgrounds as adult educators in Ireland and our experience at Highlander in 2014. We review our development as critical educators, exposed to deep inequalities in Irish society. We explore role of popular education in fostering social change, beginning with the commitment to equality and freedom, whereby, we produce…

Relaxed Manufacturing Design Tolerance Concepts. Volume 2. Appendices

DTIC Science & Technology

1977-07-01

are typical for such a part. A rough and finish pass is made to web thickness, a rough cut is made in the corners and then the stlf- fener walls...the programmed teed rate a little more on the second side due to having less material behind the web ; however, a designer usually provides for...Typical Survov Data Rocord Recommended Relaxation on Drawing Tolerances for Webs and Stiffcners Web Dimensional Deviation Occurrences vs. Stiffener

Deep listening: towards an imaginative reframing of health and well-being practices in international development

PubMed Central

Pavlicevic, Mercédès; Impey, Angela

2014-01-01

This paper challenges the “intervention-as-solution” approach to health and well-being as commonly practised in the international development sector, and draws on the disciplinary intersections between Community Music Therapy and ethnomusicology in seeking a more negotiated and situationally apposite framework for health engagement. Drawing inspiration from music-based health applications in conflict or post-conflict environments in particular, and focusing on case studies from Lebanon and South Sudan respectively, the paper argues for a re-imagined international development health and well-being framework based on the concept of deep listening. Defined by composer Pauline Oliveros as listening which “digs below the surface of what is heard … unlocking layer after layer of imagination, meaning, and memory down to the cellular level of human experience” (Oliveros, 2005), the paper explores the methodological applications of such a dialogic, discursive approach with reference to a range of related listening stances – cultural, social and therapeutic. In so doing, it explores opportunities for multi-levelled and culturally inclusive health and well-being practices relevant to different localities in the world and aimed at the re-integration of self, place and community. PMID:25729413

Learning terms and definitions: Drawing and the role of elaborative encoding.

PubMed

Wammes, Jeffrey D; Meade, Melissa E; Fernandes, Myra A

2017-09-01

Traditionally, students adopt the strategy of taking written notes when attending a class or learning from a textbook in educational settings. Informed by previous work showing that learning by doing improves memory performance, we examined whether drawing to-be-remembered definitions from university textbooks would improve later memory, relative to a more typical strategy of rote transcription. Participants were asked to either write out the definition, or to draw a picture representative of the definition. Results indicated that drawing, relative to verbatim writing, conferred a reliable memorial benefit that was robust, even when participants' preexisting familiarity with the terms was included as a covariate (in Experiment 1) or when the to-be-remembered terms and definitions were fictitious, thus removing the influence of familiarity (in Experiment 2). We reasoned that drawing likely facilitates retention at least in part because at encoding, participants must retain and elaborate upon information regarding the meaning of the definition, to translate it into a new form (a picture). This is not the case when participants write out the definitions verbatim. In Experiment 3 we showed that paraphrasing during encoding, which, like drawing and in contrast with verbatim writing, requires self-generated elaboration, led to memory performance that was comparable to drawing. Taken together, results suggest that drawing is a powerful tool which improves memory, and that drawing produces a similar level of retention as does paraphrasing. This suggests that elaborative encoding plays a critical role in the memorial benefit that drawing confers to memory for definitions of academic terms. Copyright © 2017 Elsevier B.V. All rights reserved.

Identifying pathways for sanitary sewer pathogens to reach deep water supply wells in Madison, Wisconsin

USDA-ARS?s Scientific Manuscript database

Previous work conducted by the Wisconsin Geological and Natural History Survey indicated that human enteric viruses from leaking sewers are present in several municipal wells in Madison, WI. These wells are the drinking water source for the City of Madison, are typically 700 to 900 feet deep, and pe...

Children's human figure drawings do not measure intellectual ability.

PubMed

Willcock, Emma; Imuta, Kana; Hayne, Harlene

2011-11-01

Children typically follow a well-defined series of stages as they learn to draw, but the rate at which they progress through these stages varies from child to child. Some experts have argued that these individual differences in drawing development reflect individual differences in intelligence. Here we assessed the validity of a drawing test that is commonly used to assess children's intellectual abilities. In a single study, 125 5- and 6-year-olds completed the Draw-A-Person: A Quantitative Scoring System (DAP:QSS) and the Wechsler Preschool and Primary Scale of Intelligence-Revised (WPPSI-R) or the Wechsler Abbreviated Scale of Intelligence (WASI). Although there was a statistically significant correlation between scores on the DAP:QSS and scores on the Wechsler tests, when the scores of individual children were examined, the DAP:QSS yielded a high number of false positives and false negatives for low intellectual functioning. We conclude that the DAP:QSS is not a valid measure of intellectual ability and should not be used as a screening tool. Copyright © 2011 Elsevier Inc. All rights reserved.

23. Photocopy of ca. 1890 photograph showing DRAWING ROOM (see ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

23. Photocopy of ca. 1890 photograph showing DRAWING ROOM (see also PA-1524-12). Photographed during the occupancy of Dr. and Mrs. Erwin Agnew. Note the following furnishings: 1) Chandeliers, possibly by Cornelius and Sons of Philadelphia; 2) Ceiling painting at top of photocopy is copy of Guido Reni's Aurora, one of the two most popular Renaissance paintings in the mid-19th century; 3) Scagliola columns; 4) 'Turkish' upholstered chairs (typical of the period); 5) Neo-renaissance mirror at extreme left - Parry House, 1921 Arch Street, Philadelphia, Philadelphia County, PA

A deep reef in deep trouble

USGS Publications Warehouse

Menza, Charles; Kendall, M.; Rogers, C.; Miller, J.

2007-01-01

The well-documented degradation of shallower reefs which are often closer to land and more vulnerable to pollution, sewage and other human-related stressors has led to the suggestion that deeper, more remote offshore reefs could possibly serve as sources of coral and fish larvae to replenish the shallower reefs. Yet, the distribution, status, and ecological roles of deep (>30 m) Caribbean reefs are not well known. In this report, an observation of a deep reef which has undergone a recent extensive loss of coral cover is presented. In stark contrast to the typical pattern of coral loss in shallow reefs, the deeper corals were most affected. This report is the first description of such a pattern of coral loss on a deep reef.

Radio Science from an Optical Communications Signal

NASA Technical Reports Server (NTRS)

Moision, Bruce; Asmar, Sami; Oudrhiri, Kamal

2013-01-01

NASA is currently developing the capability to deploy deep space optical communications links. This creates the opportunity to utilize the optical link to obtain range, doppler, and signal intensity estimates. These may, in turn, be used to complement or extend the capabilities of current radio science. In this paper we illustrate the achievable precision in estimating range, doppler, and received signal intensity of an non-coherent optical link (the current state-of-the-art for a deep-space link). We provide a joint estimation algorithm with performance close to the bound. We draw comparisons to estimates based on a coherent radio frequency signal, illustrating that large gains in either precision or observation time are possible with an optical link.

The ‘French exception’: the right to continuous deep sedation at the end of life

PubMed Central

Horn, Ruth

2018-01-01

In 2016, a law came into force in France granting terminally ill patients the right to continuous deep sedation (CDS) until death. This right was proposed as an alternative to euthanasia and presented as the ‘French response’ to problems at the end of life. The law draws a distinction between CDS and euthanasia and other forms of sympton control at the end of life. France is the first country in the world to legislate on CDS. This short report describes the particular context and underlying social values that led to this piece of legislation, and explores its meaning in the wider French context. PMID:29056584

Intramuscular Lipoma: A Review of the Literature

PubMed Central

McTighe, Shane; Chernev, Ivan

2014-01-01

Lipomas are the most common type of soft tissue mesenchymal tumors. They are typically located subcutaneously and consist of mature fatty tissue. When they occur under the enclosing fascia, they are called deep-seated lipomas. Infrequently, lipomas can arise inside the muscle and are called intramuscular lipomas. Intramuscular lipomas have been commonly investigated and categorized in the same group as other deep-seated and superficial lipomatous lesions. Their clinical, histological and imaging characteristics may resemble well-differentiated liposarcomas, further adding to the difficulties in the differential diagnosis. This article summarizes the available literature and describes the typical epidemiological, pathological and clinical features of intramuscular lipomas, as well as delineating their treatment and prognosis. PMID:25568733

The expression and understanding of jealousy in children with autism.

PubMed

Bauminger, Nirit

2004-01-01

We investigated the expression and understanding of jealousy in 16 high-functioning children with autism and 17 typically developing children matched for IQ, chronological age, gender, and maternal education. We examined the expression of jealousy via children's behaviors, verbalizations, and affects demonstrated during two jealousy-provoking triadic scenarios (drawing and playing) enacted among the child in the experimental group (autism or typical), that child's main caregiver (mostly mothers), and a familiar peer or sibling. The two scenarios corresponded with the two types of jealousy described in past studies: social-comparison jealousy (drawing scenario) and social-relational jealousy (playing scenario). To tap children's understanding, we asked them to identify jealousy from a picture, to provide examples of times they felt jealous, and to offer suggestions for coping with jealousy. The main results revealed that children with autism expressed jealousy in situations similar to their typical age mates but manifested it in different behaviors. Moreover, children with autism revealed a less coherent understanding of the feeling. We discuss the meaning of the gap between demonstrating and understanding jealousy in light of the two central theoretical views conceptualizing the core emotional deficit in children with autism.

Neuro-impressions: interpreting the nature of human creativity

PubMed Central

Siler, Todd Lael

2012-01-01

Understanding the creative process is essential for realizing human potential. Over the past four decades, the author has explored this subject through his brain-inspired drawings, paintings, symbolic sculptures, and experimental art installations that present myriad impressions of human creativity. These impressionistic artworks interpret rather than illustrate the complexities of the creative process. They draw insights from empirical studies that correlate how human beings create, learn, remember, innovate, and communicate. In addition to offering fresh aesthetic experiences, this metaphorical art raises fundamental questions concerning the deep connections between the brain and its creations. The author describes his artworks as embodiments of everyday observations about the neuropsychology of creativity, and its all-purpose applications for stimulating and accelerating innovation. PMID:23091455

Enhancing observation by drawing: Alveolinids models by Manfred Reichel (1896-1984)

NASA Astrophysics Data System (ADS)

Leria, Maria

2017-04-01

Graphic representation is a fundamental tool in morphological studies, as paleontology. A paradigmatic example is the alveolinid drawings of Prof. Manfred Reichel (1896-1984). Thanks to these drawings his research on foraminifera, had an important impact on micropaleontology. Manfred Reichel studied Fine Arts, but later he began a scientific career on biological sciences and becoming a professor in micropaleontology, at the Geological and Paleontological Institute of the University of Basel, Switzerland. His background in art had a benefit in his scientific production, especially with the extremely complex foraminiferal structures. By means of illustrations, inspired by the French naturalists, he was able to solve the most complex internal architecture of forams. His drawings display foraminifera's internal 3D structure in such a comprehensible way that has not been improved using modern techniques. His work has been used by different generations of paleontologist to understand the internal architecture of forams and are still used today. The aim of this study is to analyze the process that Reichel followed to create some of his most representative drawings. This study is based on the examination of a selection of Reichel's drawings (n>40) held at the Natural History Museum in Basel. In addition, his family and students have been interviewed supplying useful information to understand how he applied his artistic skills to teach and research. This study illustrates the steps followed by Reichel in the creation of a drawing of alveolinid. The process represents the transformation of the morphological data from 2D images (polished rock sections) into a comprehensible 3D image. A description of the process of observation, comparison, sketches and studies, concluding with the final three-dimensional drawing is shown. The results show that that the classical convention in drawing is still and irreplaceable tool in natural sciences, because it allows to define aspects that cannot be equally appreciated shown by other means (text or photography). Drawing it can also be a scientific analytical tool with an artistic identity, we present an example where rigor is intrinsically linked to a high sensibility, and a deep knowledge of drawing that brings as a result a beautiful piece of art.

A Safe Lab on Nerve Gases.

ERIC Educational Resources Information Center

Tucker, David C.

1988-01-01

Describes an experiment involving pineapples and gelatin that allows students to investigate the conditions that typically render an enzyme functionless, similar to the effect of nerve gasses. Discusses the materials, procedures, and results, drawing analogies to the effects of a nerve gas. (CW)

Cold pool organization and the merging of convective updrafts in a Large Eddy Simulation

NASA Astrophysics Data System (ADS)

Glenn, I. B.; Krueger, S. K.

2016-12-01

Cold pool organization is a process that accelerates the transition from shallow to deep cumulus convection, and leads to higher deep convective cloud top heights. The mechanism by which cold pool organization enhances convection remains not well understood, but the basic idea is that since precipitation evaporation and a low equivalent potential temperature in the mid-troposphere lead to strong cold pools, the net cold pool effect can be accounted for in a cumulus parameterization as a relationship involving those factors. Understanding the actual physical mechanism at work will help quantify the strength of the relationship between cold pools and enhanced deep convection. One proposed mechanism of enhancement is that cold pool organization leads to reduced distances between updrafts, creating a local environment more conducive to convection as updrafts entrain parcels of air recently detrained by their neighbors. We take this hypothesis one step further and propose that convective updrafts actually merge, not just exchange recently processed air. Because entrainment and detrainment around an updraft draws nearby air in or pushes it out, respectively, they act like dynamic flow sources and sinks, drawing each other in or pushing each other away. The acceleration is proportional to the inverse square of the distance between two updrafts, so a small reduction in distance can make a big difference in the rate of merging. We have shown in previous research how merging can be seen as collisions between different updraft air parcels using Lagrangian Parcel Trajectories (LPTs) released in a Large Eddy Simulation (LES) during a period with organized deep convection. Now we use a Eulerian frame of reference to examine the updraft merging process during the transition from shallow to organized deep convection. We use a case based on the Large-Scale Biosphere-Atmosphere Experiment in Amazonia (LBA) for our LES. We directly measure the rate of entrainment and the properties of the entrained air for all convective updrafts in the simulation. We use a tracking algorithm to define merging between convective updrafts. We will show the rate of merging as the transition between shallow and deep convection occurs and the different distributions of entrainment rate and ultimate detrainment height of merged and non-merged updrafts.

Modeling Postconvective Submesoscale Coherent Vortices in the Northwestern Mediterranean Sea

NASA Astrophysics Data System (ADS)

Damien, P.; Bosse, A.; Testor, P.; Marsaleix, P.; Estournel, C.

2017-12-01

For the first time, the formation of submesoscale coherent vortices (SCVs) during intermediate and deep convection events is documented in a realistic high-resolution (1 km) numerical simulation of the oceanic circulation in the northwestern Mediterranean Sea. Winter intermediate and deep convection leads to the formation of anticyclonic and cyclonic eddies with lifetimes exceeding 1 year. By focusing on three typical eddies, the main characteristics of such vortices are discussed. The anticyclonic eddies are typical of SCVs observed in deep convection areas so far. They are characterized by a small radius (˜6.5 km) and orbital peak velocities of about 7 cm/s located at great depth (˜1500 m) or intermediate depth (˜500 m). The cyclonic vortices show very similar characteristics, such as a high Rossby number (˜0.4), but with surface-intensified structures. The long lifetimes of both anticyclonic and cyclonic eddies reflect very slow diffusive processes between their core and their surroundings and a strong resistance to external perturbations. These long-lived eddies are found to participate in the spreading of a significant portion (from 15 to 35%) of the convected waters in the Gulf of Lions and contribute to the ventilation of the deep basin.

How Secondary History Teachers Use and Think about Museums: Current Practices and Untapped Promise for Promoting Historical Understanding

ERIC Educational Resources Information Center

Marcus, Alan S.; Levine, Thomas H.; Grenier, Robin S.

2012-01-01

Museums have great potential to help secondary students develop a deep understanding of the past; however, we know little about what history teachers actually do or want to accomplish when they utilize museums. In this study, the authors draw on questionnaire and interview data from 94 secondary history teachers in Connecticut in an effort to…

'Not-Being-At-Home': Subject, Freedom and Transcending in Heideggerian Educational Philosophy

ERIC Educational Resources Information Center

d'Agnese, Vasco

2018-01-01

In my paper, by drawing on the writings Heidegger developed in the late 1920s, I wish to display what we may refer to as the thorough educational nature of Heideggerian reflection. It is my argument that the analysis of Dasein we find in the early Heidegger displays an extraordinary deep and dense reflection on selfhood and subjectivity, a…

Exploring the Use of Supplemental Instruction: Supporting Deep Understanding and Higher-Order Thinking in Chemistry

ERIC Educational Resources Information Center

Paideya, V.; Sookrajh, R.

2010-01-01

Many under-prepared university students do not know how to study (Martin and Arendale 1993) because they have not yet developed the abstract reasoning skills that allow them to learn new ideas simply by reading a text or listening to a lecture. This article draws from selected findings from a PhD study currently being undertaken at a university in…

A Critical Co-Constructed Autoethnography of a Gendered Cross-Cultural Mentoring between Two Early Career Latin@ Scholars Working in the Deep South

ERIC Educational Resources Information Center

Suriel, Regina L.; Martinez, James; Evans-Winters, Venus

2018-01-01

Multicultural mentoring has been suggested to support Latin@ faculty success in their careers, yet current literature on effective mentorships of Latin@ faculty is limited. This critical co-constructed autoethnography draws on critical race theory (CRT) and latin@ critical race theory (LatCrit) frameworks to highlight the lived experiences and key…

Slime mould biotechnology

NASA Astrophysics Data System (ADS)

Mayne, Richard

2015-03-01

Slime mould computing is an inherently multi-disciplinary subfield of unconventional computing that draws upon aspects of not only theoretical computer science and electronics, but also the natural sciences. This chapter focuses on the biology of slime moulds and expounds the viewpoint that a deep, intuitive understanding of slime mould life processes is a fundamental requirement for understanding -- and, hence, harnessing -- the incredible behaviour patterns we may characterise as "computation"...

Constraints on the source parameters of low-frequency earthquakes on the San Andreas Fault

USGS Publications Warehouse

Thomas, Amanda M.; Beroza, Gregory C.; Shelly, David R.

2016-01-01

Low-frequency earthquakes (LFEs) are small repeating earthquakes that occur in conjunction with deep slow slip. Like typical earthquakes, LFEs are thought to represent shear slip on crustal faults, but when compared to earthquakes of the same magnitude, LFEs are depleted in high-frequency content and have lower corner frequencies, implying longer duration. Here we exploit this difference to estimate the duration of LFEs on the deep San Andreas Fault (SAF). We find that the M ~ 1 LFEs have typical durations of ~0.2 s. Using the annual slip rate of the deep SAF and the average number of LFEs per year, we estimate average LFE slip rates of ~0.24 mm/s. When combined with the LFE magnitude, this number implies a stress drop of ~104 Pa, 2 to 3 orders of magnitude lower than ordinary earthquakes, and a rupture velocity of 0.7 km/s, 20% of the shear wave speed. Typical earthquakes are thought to have rupture velocities of ~80–90% of the shear wave speed. Together, the slow rupture velocity, low stress drops, and slow slip velocity explain why LFEs are depleted in high-frequency content relative to ordinary earthquakes and suggest that LFE sources represent areas capable of relatively higher slip speed in deep fault zones. Additionally, changes in rheology may not be required to explain both LFEs and slow slip; the same process that governs the slip speed during slow earthquakes may also limit the rupture velocity of LFEs.

Deep Learning Methods for Quantifying Invasive Benthic Species in the Great Lakes

NASA Astrophysics Data System (ADS)

Billings, G.; Skinner, K.; Johnson-Roberson, M.

2017-12-01

In recent decades, invasive species such as the round goby and dreissenid mussels have greatly impacted the Great Lakes ecosystem. It is critical to monitor these species, model their distribution, and quantify the impacts on the native fisheries and surrounding ecosystem in order to develop an effective management response. However, data collection in underwater environments is challenging and expensive. Furthermore, the round goby is typically found in rocky habitats, which are inaccessible to standard survey techniques such as bottom trawling. In this work we propose a robotic system for visual data collection to automatically detect and quantify invasive round gobies and mussels in the Great Lakes. Robotic platforms equipped with cameras can perform efficient, cost-effective, low-bias benthic surveys. This data collection can be further optimized through automatic detection and annotation of the target species. Deep learning methods have shown success in image recognition tasks. However, these methods often rely on a labelled training dataset, with up to millions of labelled images. Hand labeling large numbers of images is expensive and often impracticable. Furthermore, data collected in the field may be sparse when only considering images that contain the objects of interest. It is easier to collect dense, clean data in controlled lab settings, but this data is not a realistic representation of real field environments. In this work, we propose a deep learning approach to generate a large set of labelled training data realistic of underwater environments in the field. To generate these images, first we draw random sample images of individual fish and mussels from a library of images captured in a controlled lab environment. Next, these randomly drawn samples will be automatically merged into natural background images. Finally, we will use a generative adversarial network (GAN) that incorporates constraints of the physical model of underwater light propagation to simulate the process of underwater image formation in various water conditions. The output of the GAN will be realistic looking annotated underwater images. This generated dataset of images will be used to train a classifier to identify round gobies and mussels in order to measure the biomass and abundance of these invasive species in the Great Lakes.

Ductile Damage and Fatigue Behavior of Semi-Finished Tailored Blanks for Sheet-Bulk Metal Forming Processes

NASA Astrophysics Data System (ADS)

Besserer, Hans-Bernward; Hildenbrand, Philipp; Gerstein, Gregory; Rodman, Dmytro; Nürnberger, Florian; Merklein, Marion; Maier, Hans Jürgen

2016-03-01

To produce parts from sheet metal with thickened functional elements, bulk forming operations can be employed. For this new process class, the term sheet-bulk metal forming has been established recently. Since sheet-bulk metal forming processes such as orbital forming generates triaxial stress and strain states, ductile damage is induced in the form of voids in the microstructure. Typical parts will experience cyclic loads during service, and thus, the influence of ductile damage on the fatigue life of parts manufactured by orbital forming is of interest. Both the formation and growth of voids were characterized following this forming process and then compared to the as-received condition of the ferritic deep drawing steel DC04 chosen for this study. Subsequent to the forming operation, the specimens were fatigued and the evolution of ductile damage and the rearrangement of the dislocation networks occurring during cyclic loading were determined. It was shown, that despite an increased ductile damage due to the forming process, the induced strain hardening has a positive effect on the fatigue life of the material. However, by analyzing the fatigued specimens a development of the ductile damage by an increasing number of voids and a change in the void shape were detected.

Mechanical characterization of a short fiber-reinforced polymer at room temperature: experimental setups evaluated by an optical measurement system

NASA Astrophysics Data System (ADS)

Röhrig, C.; Scheffer, T.; Diebels, S.

2017-09-01

Composite materials are of great interest for industrial applications because of their outstanding properties. Each composite material has its own characteristics due to the large number of possible combinations of matrix and filler. As a result of their compounding, composites usually show a complex material behavior. This work is focused on the experimental testing of a short fiber-reinforced thermoplastic composite at room temperature. The characteristic behavior of this material class is often based on a superposition of typical material effects. The predicted characteristic material properties such as elasto-plasticity, damage and anisotropy of the investigated material are obtained from results of cyclic uniaxial tensile tests at constant strain rate. Concerning the manufacturing process as well as industrial applications, the experimental investigations are extended to multiaxial loading situations. Therefore, the composite material is examined with a setup close to a deep-drawing process, the Nakajima test (Nakazima et al. in Study on the formability of steel sheets. Yawate Technical Report No. 264, pp 8517-8530, 1968). The evaluation of the experimental investigations is provided by an optical analysis system using a digital image correlation software. Finally, based on the results of the uniaxial tensile tests, a one-dimensional macroscopic model is introduced and first results of the simulation are provided.

Potential sound production by a deep-sea fish

NASA Astrophysics Data System (ADS)

Mann, David A.; Jarvis, Susan M.

2004-05-01

Swimbladder sonic muscles of deep-sea fishes were described over 35 years ago. Until now, no recordings of probable deep-sea fish sounds have been published. A sound likely produced by a deep-sea fish has been isolated and localized from an analysis of acoustic recordings made at the AUTEC test range in the Tongue of the Ocean, Bahamas, from four deep-sea hydrophones. This sound is typical of a fish sound in that it is pulsed and relatively low frequency (800-1000 Hz). Using time-of-arrival differences, the sound was localized to 548-696-m depth, where the bottom was 1620 m. The ability to localize this sound in real-time on the hydrophone range provides a great advantage for being able to identify the sound-producer using a remotely operated vehicle.

Novel concept for measurement of global blank draw-in when deep drawing outer skin automotive components

NASA Astrophysics Data System (ADS)

Kraft, M.; Bürgel, U.

2017-09-01

Modern press shops in the automotive industry have to deal with many challenges. One challenge is to achieve a consistent part quality. In order to reach this target, modern press systems and tools are equipped with several types of sensors. For example, there are sensors to measure characteristic values of blanks or sensors to measure the temperature in the tools. Often several sensors are used simultaneously. A significant parameter for determining the quality of draw panels is the draw-in amount. Previously, it was only possible to measure selective points of the draw-in amount due to sensors in the tools. All the known sensors have disadvantages, for example, they are exposed to wearing or susceptible to contamination. In this paper, a sensor system will be introduced that allows the measurement of the global draw-in amount of a drawn panel. Here, the draw-in amount is not measured in the draw die, it is measured during the transportation of the part to the following operation. Within the short transport time the part can be fully covered by an optical system. This leads to a multitude of advantages compared with previously known systems. For example, it is no longer necessary to equip every tool with sensor technology to measure the draw-in amount. Now it is sufficient to equip every press line with a single system to measure the draw-in. This fact leads not only to lower costs, it also simplifies the tool design. In addition, the risk of contamination of the sensor system is greatly reduced. The paper will also introduce an actuator that was built to locally vary the blankholder forces for a sheet metal forming process. Furthermore, an FEM model is presented that allows the determination of the effective range of these actuators. With the knowledge from the FEM simulation, an approach for an open loop control is presented. With this approach, the press shops at Opel are developing a control procedure in order to influence the stamping process positively.

Rapid scavenging of jellyfish carcasses reveals the importance of gelatinous material to deep-sea food webs.

PubMed

Sweetman, Andrew K; Smith, Craig R; Dale, Trine; Jones, Daniel O B

2014-12-07

Jellyfish blooms are common in many oceans, and anthropogenic changes appear to have increased their magnitude in some regions. Although mass falls of jellyfish carcasses have been observed recently at the deep seafloor, the dense necrophage aggregations and rapid consumption rates typical for vertebrate carrion have not been documented. This has led to a paradigm of limited energy transfer to higher trophic levels at jelly falls relative to vertebrate organic falls. We show from baited camera deployments in the Norwegian deep sea that dense aggregations of deep-sea scavengers (more than 1000 animals at peak densities) can rapidly form at jellyfish baits and consume entire jellyfish carcasses in 2.5 h. We also show that scavenging rates on jellyfish are not significantly different from fish carrion of similar mass, and reveal that scavenging communities typical for the NE Atlantic bathyal zone, including the Atlantic hagfish, galatheid crabs, decapod shrimp and lyssianasid amphipods, consume both types of carcasses. These rapid jellyfish carrion consumption rates suggest that the contribution of gelatinous material to organic fluxes may be seriously underestimated in some regions, because jelly falls may disappear much more rapidly than previously thought. Our results also demonstrate that the energy contained in gelatinous carrion can be efficiently incorporated into large numbers of deep-sea scavengers and food webs, lessening the expected impacts (e.g. smothering of the seafloor) of enhanced jellyfish production on deep-sea ecosystems and pelagic-benthic coupling. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

Multiple spatial scale analyses provide new clues on patterns and drivers of deep-sea nematode diversity

NASA Astrophysics Data System (ADS)

Danovaro, Roberto; Carugati, Laura; Corinaldesi, Cinzia; Gambi, Cristina; Guilini, Katja; Pusceddu, Antonio; Vanreusel, Ann

2013-08-01

The deep sea is the largest biome of the biosphere. The knowledge of the spatial variability of deep-sea biodiversity is one of the main challenges of marine ecology and evolutionary biology. The choice of the observational spatial scale is assumed to play a key role for understanding processes structuring the deep-sea benthic communities and one of the most typical features of marine biodiversity distribution is the existence of bathymetric gradients. However, the analysis of biodiversity bathymetric gradients and the associated changes in species composition (beta diversity) typically compared large depth ranges (with intervals of 500 to 1000 or even 2000 m depth among sites). To test whether significant changes in alpha and beta diversity occur also at fine-scale bathymetric gradients (i.e., within few hundred-meter depth intervals) the variability of deep-sea nematode biodiversity and assemblage composition along a bathymetric transect (200-1200 m depth) with intervals of 200 m among sampling depths, was investigated. A hierarchical sampling strategy for the analysis of nematode species richness, beta diversity, functional (trophic) diversity, and related environmental variables, was used. The results indicate the lack of significant differences in taxonomic and functional diversity across sampling depths, but the presence of high beta diversity at all spatial scales investigated: between cores collected from the same box corer (on average 56%), among deployments at the same depth (58%), and between all sampling depths (62%). Such high beta diversity is influenced by the presence of small-scale patchiness in the deep sea and is also related to the large number of rare or very rare species (typically accounting for >80% of total species richness). Moreover, the number of ubiquitous nematode species across all sampling depths is quite low (ca. 15%). Multiple regression analyses provide evidence that such patterns could be related to the different availability, composition and size spectra of food particles in the sediments. Additionally, though to a lesser extent, our results indicate, that selective predation can influence the nematode trophic composition. These findings suggest that a multiple scale analysis based on a nested sampling design could significantly improve our knowledge of bathymetric patterns of deep-sea biodiversity and its drivers.

For Enrichment and Enjoyment: The Humanities.

ERIC Educational Resources Information Center

Thomas, Marjorie

1981-01-01

Describes three humanities activities, designed using the 1981 "California History/Social Science Framework," in which seventh-grade social studies students study medieval culture. Students design personal coats-of-arms, play a typical medieval game, listen to medieval stories and myths, and draw or illustrate stories using medieval…

Sports Facilities, Zapopan, Jalisco, Mexico.

ERIC Educational Resources Information Center

Amelar, Sarah

2001-01-01

Highlights a new K-12 school gymnasium in Mexico that changes and reacts to weather conditions, requires no air conditioning, and, on typical days, uses sunlight filtering through its ample clerestory as the sole source of illumination. Includes numerous photographs, a section drawing, and a site plan. (GR)

Robotic end gripper with a band member to engage object

DOEpatents

Pollard, R.E.; Robinson, S.C.; Thompson, W.F.; Couture, S.A.; Sutton, B.J.

1994-05-10

An end effector for use with robotic arms and like devices is described that utilizes a flexible band to draw an object against an anvil having a concave surface. One typical convex surface is created by a V-block, with an apex of the V being centrally located. If an object to be grasped is fragile, the contour of the concave surface closely matches the surface of the object. Typically the movement of the band is effected by a linear actuator, with the anvil remaining fixed relative to a support base. Several embodiments are described that utilize variations in drawing the band toward the anvil, with one of these embodiments described in detail in the form of a fabricated unit. One embodiment includes a cover element that can be moved over an object after the grasping thereof, with this cover potentially serving various functions. Movement of the cover can be effected with a second linear actuator. 8 figures.

6. INTERIOR VIEW OF BASEMENT OF CA. 1948 FACTORY ADDITION, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. INTERIOR VIEW OF BASEMENT OF CA. 1948 FACTORY ADDITION, WITH REINFORCED CONCRETE FRAME AND FLOOR OF REINFORCED CONCRETE TEE-BEAMS, LOOKING NORTH. AT LEFT IS DEEP DRAW, HEAVY PRESS MANUFACTURED BY E. W. BLISS CO., BROOKLYN, NEW YORK. PRESS #3-1/2 B, PATENTED BY E. W. BLISS CO., 1893. MANUFACTURERS PLATE INDICATES PRESS DATES FROM 1920. - Illinois Pure Aluminum Company, 109 Holmes Street, Lemont, Cook County, IL

Optimization of chemical compositions in low-carbon Al-killed enamel steel produced by ultra-fast continuous annealing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dong, Futao, E-mail: dongft@sina.com; Du, Linxiu; Liu, Xianghua

2013-10-15

The influence of Mn,S and B contents on microstructural characteristics, mechanical properties and hydrogen trapping ability of low-carbon Al-killed enamel steel was investigated. The materials were produced and processed in a laboratory and the ultra-fast continuous annealing processing was performed using a continuous annealing simulator. It was found that increasing Mn,S contents in steel can improve its hydrogen trapping ability which is attributed by refined ferrite grains, more dispersed cementite and added MnS inclusions. Nevertheless, it deteriorates mechanical properties of steel sheet. Addition of trace boron results in both good mechanical properties and significantly improved hydrogen trapping ability. The boronmore » combined with nitrogen segregating at grain boundaries, cementite and MnS inclusions, provides higher amount of attractive hydrogen trapping sites and raises the activation energy for hydrogen desorption from them. - Highlights: • We study microstructures and properties in low-carbon Al-killed enamel steel. • Hydrogen diffusion coefficients are measured to reflect fish-scale resistance. • Manganese improves hydrogen trapping ability but decrease deep-drawing ability. • Boron improves both hydrogen trapping ability and deep-drawing ability. • Both excellent mechanical properties and fish-scale resistance can be matched.« less

The effect of elevated die temperature on deformation of deep drawn round metal cup

NASA Astrophysics Data System (ADS)

Basril, M. A. M.; Hafsyam, Y. M.; Azuddin, M.; Choudhury, I. A.

2017-06-01

One of the major considerations in the current deep drawing practice is the product quality. In this research, the effect of heating temperature on the drawability of the round metal cup has been investigated. Firstly, round metal cups of aluminium and mild steel were drawn from the blank diameters of 60 mm, 65 mm and 70 mm. The experiment conducted at room temperature first, then at 50°C and 100°C. The elongation of the major and minor strains along the cup profile after the process is measured and analysed. On the other hand, the defects from the experiment output and ABAQUS/CAE simulation are compared. The result from experiment shows that the highest major elongation is 11.64 mm and it is happened to a deep drawn aluminium round cup with LDR of 1.69 at temperature of 100°C. On the other hand, for deep drawn mild steel round cup, shows highest major elongation of 12.44 mm for a cup with LDR of 1.56 at 100°C. Both of these statements indicates that the higher temperature could improve the formability of the deep drawn parts besides reducing the probability of the defect to be happened.

Forward osmosis for oily wastewater reclamation: Multi-charged oxalic acid complexes as draw solutes.

PubMed

Ge, Qingchun; Amy, Gary Lee; Chung, Tai-Shung

2017-10-01

Forward osmosis (FO) has demonstrated its merits in hybrid FO seawater desalination. However, FO may have a potential for other applications if suitable draw solutes are available. In this study, a series of novel draw solutes based on oxalic acid (OA)-transitional metal complexes are presented. Influential factors of FO performance have been systematically investigated by varying the transitional metals, cations of the complex draw solutes as well as the experimental conditions. Compared to NaCl and other recently synthesized draw solutes, the OA complexes show superior FO performance in terms of high water fluxes up to 27.5 and 89.1 LMH under the respective FO and PRO (pressure retarded osmosis) modes, both with negligible reverse solute fluxes. The features of octahedral geometry, abundant hydrophilic groups and ionic species are crucial for the OA complexes as appropriate draw solutes with satisfactory FO performance. Among the synthesized OA complexes, the ammonium salt of chromic complex (NH 4 -Cr-OA) outperforms others due to the presence of more ionic species in its complex system. NH 4 -Cr-OA also performs better than the typical NaCl draw solute in FO oily wastewater treatment with higher water recovery and negligible reverse fluxes. Dilute solutions of OA complexes have been reconcentrated through membrane distillation (MD) and reused to new round of FO processes. The OA complexes have demonstrated their suitability and superiority as a novel class of draw solutes for the FO process in this study. Copyright © 2017 Elsevier Ltd. All rights reserved.

Drawing method can improve musculoskeletal anatomy comprehension in medical faculty student.

PubMed

Joewono, Muliani; Karmaya, I Nyoman Mangku; Wirata, Gede; Yuliana; Widianti, I Gusti Ayu; Wardana, I Nyoman Gede

2018-03-01

The Chinese philosophy of Confucianism said "What I heard I forgot, what I see, I remember, what I do, I understand." During this time, most of the teaching and learning process relies on viewing and listening modalities only. As a result, much information does not last long in memory as well as the material understanding achieves became less deep. In studying anatomy science, drawing is one of effective important methods because it is an integration of ideas and knowledge of vision thereby increasing comprehension and learning motivation of college students. The purpose of this research is to know the musculoskeletal anatomy comprehension by drawing learning method in Medical Faculty student. This research uses observational analytic design with the cross-sectional design. Total sampling was done to the entire student of Physiotherapy Study Program in 2012, 2013, and 2014, Medical Faculty of Udayana University. The average value of musculoskeletal anatomy of the student in 2012, 2013, and 2014 sequentially are 31.67, 33.57, and 45.00, respectively. Normality test with Shapiro-Wilk and homogeneity with Levene's test showed normal results and homogeneous. One-way ANOVA test between groups showed a significant result that is 11.00 ( P <0.05). It is concluded that the drawing method can improve the musculoskeletal anatomy comprehension in Medical Faculty student.

Ultra High Work, High Efficiency Turbines For UAVs

DTIC Science & Technology

2006-06-01

same amount of work, thereby reducing the weight of the LPT. Howell et al. and Arts and Coton , 15-17 estimated that a 34% reduction in blade count...dimple a few mm in diameter and 0.1 mm to 0.3 mm deep. A typical surface finish on newly manufactured blading is typically 1-2 μm. In- use LP

11. The work area of a typical fuel storage and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. The work area of a typical fuel storage and transfer basin. The wooden floor was built over the 20-foot deep water-filled basin. Buckets filled with irradiated fuel of dummy slugs in the floor and were hung on trolleys attached to the monorail tracks suspended from the ceiling. 85-H807 - B Reactor, Richland, Benton County, WA

Performing Inferential Statistics Prior to Data Collection

ERIC Educational Resources Information Center

Trafimow, David; MacDonald, Justin A.

2017-01-01

Typically, in education and psychology research, the investigator collects data and subsequently performs descriptive and inferential statistics. For example, a researcher might compute group means and use the null hypothesis significance testing procedure to draw conclusions about the populations from which the groups were drawn. We propose an…

Supplementing Summative Findings with Formative Data.

ERIC Educational Resources Information Center

Noggle, Nelson L.

This paper attempts to provide evaluators, administrators, and policy makers with the advantages of and methodology of merging formative and summative data to enhance summative evaluations. It draws on RMC Research Corporation's 1980-81 California Statewide Evaluation of Migrant Education. The concern that evaluations typically fail to obtain the…

The Pythagorean Roots of Introductory Physics

ERIC Educational Resources Information Center

Clarage, James B.

2013-01-01

Much of the mathematical reasoning employed in the typical introductory physics course can be traced to Pythagorean roots planted over two thousand years ago. Besides obvious examples involving the Pythagorean theorem, I draw attention to standard physics problems and derivations which often unknowingly rely upon the Pythagoreans' work on…

Automated Guidance for Student Inquiry

ERIC Educational Resources Information Center

Gerard, Libby F.; Ryoo, Kihyun; McElhaney, Kevin W.; Liu, Ou Lydia; Rafferty, Anna N.; Linn, Marcia C.

2016-01-01

In 4 classroom experiments we investigated uses for technologies that automatically score student generated essays, concept diagrams, and drawings in inquiry curricula. We used the automatic scores to assign typical and research-based guidance and studied the impact of the guidance on student progress. Seven teachers and their 897 students…

The Localized Corrosion of Aluminum Alloys - A Review.

DTIC Science & Technology

1983-07-01

will be typical rather than comprehensive . The purpose will be to draw from these reports certain well-founded, and well-accepted conclusions useful...established by Nilsen and Bardal (161) who measured the pitting potential, Ep, the protection potential, E4 and, Ecrit . , above which the sample

20. GEOLOGY, PLAN AND PROFILE, SHOWING LINED AND UNLINED SECTIONS, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

20. GEOLOGY, PLAN AND PROFILE, SHOWING LINED AND UNLINED SECTIONS, AND DETAILED TYPICAL CROSS SECTIONS. Leeds, Hill, Barnard & Jewett drawing, no number, revised 3-20-42. - Salinas River Project, Cuesta Tunnel, Southeast of U.S. 101, San Luis Obispo, San Luis Obispo County, CA

The relationship between level of processing and hippocampal-cortical functional connectivity during episodic memory formation in humans.

PubMed

Schott, Björn H; Wüstenberg, Torsten; Wimber, Maria; Fenker, Daniela B; Zierhut, Kathrin C; Seidenbecher, Constanze I; Heinze, Hans-Jochen; Walter, Henrik; Düzel, Emrah; Richardson-Klavehn, Alan

2013-02-01

New episodic memory traces represent a record of the ongoing neocortical processing engaged during memory formation (encoding). Thus, during encoding, deep (semantic) processing typically establishes more distinctive and retrievable memory traces than does shallow (perceptual) processing, as assessed by later episodic memory tests. By contrast, the hippocampus appears to play a processing-independent role in encoding, because hippocampal lesions impair encoding regardless of level of processing. Here, we clarified the neural relationship between processing and encoding by examining hippocampal-cortical connectivity during deep and shallow encoding. Participants studied words during functional magnetic resonance imaging and freely recalled these words after distraction. Deep study processing led to better recall than shallow study processing. For both levels of processing, successful encoding elicited activations of bilateral hippocampus and left prefrontal cortex, and increased functional connectivity between left hippocampus and bilateral medial prefrontal, cingulate and extrastriate cortices. Successful encoding during deep processing was additionally associated with increased functional connectivity between left hippocampus and bilateral ventrolateral prefrontal cortex and right temporoparietal junction. In the shallow encoding condition, on the other hand, pronounced functional connectivity increases were observed between the right hippocampus and the frontoparietal attention network activated during shallow study processing. Our results further specify how the hippocampus coordinates recording of ongoing neocortical activity into long-term memory, and begin to provide a neural explanation for the typical advantage of deep over shallow study processing for later episodic memory. Copyright © 2011 Wiley Periodicals, Inc.

Research on geological hazard identification based on deep learning

NASA Astrophysics Data System (ADS)

Zhu, Cheng; Cheng, Tao

2018-05-01

Geological hazards such as landslides, debris flows and collapses are potential hazards affecting the safety of nearby roads and people. Land and Resources Bureau and other relevant departments to undertake the responsibility of prevention and control of geological disasters, an important body, how to deal with the characteristics of sudden geological disasters in the region, according to pre-established emergency measures quickly and accurately survey, is an important issue to be solved. Based on the analysis of the types and effects of typical geological disasters, this paper studies the relevant methods of identifying typical geological disasters through artificial neural networks, and proposes and designs intelligent geological survey methods and systems based on deep learning to provide relevant departments such as Land and Resources Bureau Related Mountain Geological Survey and Information Support.

Young Children's Perceptions of Scientists: A Preliminary Study

ERIC Educational Resources Information Center

Buldu, Mehmet

2006-01-01

Background: Since the 1950s, there has been a growing body of research dealing with perceptions children have of scientists. Typically, research studies in this area have utilized children's drawings in an effort to discern what those perceptions are. Studies assessing perceptions children have of scientists have shown that children have…

Essence or Practice? Conflicting Cultural Values in Chinese EFL Textbooks: A Discourse Approach

ERIC Educational Resources Information Center

Xiong, Tao

2012-01-01

While increasing attention is being paid to the ideological debate on Confucian-influenced cultural values communicated in Chinese language textbooks, EFL textbooks remain under-examined since the TEFL/TESOL is typically assumed to be "technical" and "neutral". Drawing on critical theoretical perspectives on curriculum,…

49 CFR 1580.3 - Terms used in this part.

Code of Federal Regulations, 2013 CFR

2013-10-01

... uses diesel or electric powered locomotives and railroad passenger cars to serve an urban area, its... electric railcars, typically drawing power from a third rail, operating in separate rights-of-way in multiple cars; also referred to as subways, metros, or regional rail. High Threat Urban Area (HTUA) means...

49 CFR 1580.3 - Terms used in this part.

Code of Federal Regulations, 2014 CFR

2014-10-01

... uses diesel or electric powered locomotives and railroad passenger cars to serve an urban area, its... electric railcars, typically drawing power from a third rail, operating in separate rights-of-way in multiple cars; also referred to as subways, metros, or regional rail. High Threat Urban Area (HTUA) means...

49 CFR 1580.3 - Terms used in this part.

Code of Federal Regulations, 2012 CFR

2012-10-01

... uses diesel or electric powered locomotives and railroad passenger cars to serve an urban area, its... electric railcars, typically drawing power from a third rail, operating in separate rights-of-way in multiple cars; also referred to as subways, metros, or regional rail. High Threat Urban Area (HTUA) means...

Being Human: Transdisciplinarity in Nursing

ERIC Educational Resources Information Center

Timmons, Stephen; Edgley, Alison; Meal, Andy; Narayanasamy, Aru

2016-01-01

Nursing as an academic discipline typically draws on a wide range of other disciplines. There is debate about whether this is a sound basis for the discipline, or whether nursing needs to develop a distinctive body of knowledge. The concept of transdisciplinarity, though little discussed in nursing, is of considerable value in understanding…

Identifying Country-Specific Cultures of Physics Education: A Differential Item Functioning Approach

ERIC Educational Resources Information Center

Mesic, Vanes

2012-01-01

In international large-scale assessments of educational outcomes, student achievement is often represented by unidimensional constructs. This approach allows for drawing general conclusions about country rankings with respect to the given achievement measure, but it typically does not provide specific diagnostic information which is necessary for…

Why environmental scientists are becoming Bayesians

Treesearch

James S. Clark

2005-01-01

Advances in computational statistics provide a general framework for the high dimensional models typically needed for ecological inference and prediction. Hierarchical Bayes (HB) represents a modelling structure with capacity to exploit diverse sources of information, to accommodate influences that are unknown (or unknowable), and to draw inference on large numbers of...

Prevention of overweight and obesity in children and adolescents: Critical appraisal of the evidence base (in German)

USDA-ARS?s Scientific Manuscript database

Despite careful planning and implementation, overweight/obesity prevention interventions in children and adolescents typically show no, inconsistent or merely weak effects. Such programs usually aim at behavior changes, rarely also at environmental changes, that draw upon conventional wisdom regardi...

157. ARAIII Reactor building (ARA608) Main gas loop mechanical flow ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

157. ARA-III Reactor building (ARA-608) Main gas loop mechanical flow sheet. This drawing was selected as a typical example of mechanical arrangements within reactor building. Aerojet-general 880-area/GCRE-0608-50-013-102634. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

Engaging Beginning Teachers as Experts in Professional Development

ERIC Educational Resources Information Center

Fleming, Jane

2014-01-01

Beginning teachers most often are viewed as needing significant support in all areas of teaching. As a result, professional development (PD) associated with induction programs typically is presented by experienced professionals. This article describes one induction program's attempt to draw on the strengths within its network, engaging new…

Trees of Our National Forests.

ERIC Educational Resources Information Center

Forest Service (USDA), Washington, DC.

Presented is a description of the creation of the National Forests system, how trees grow, managing the National Forests, types of management systems, and managing for multiple use, including wildlife, water, recreation and other uses. Included are: (1) photographs; (2) line drawings of typical leaves, cones, flowers, and seeds; and (3)…

49 CFR 1580.3 - Terms used in this part.

Code of Federal Regulations, 2011 CFR

2011-10-01

... uses diesel or electric powered locomotives and railroad passenger cars to serve an urban area, its... electric railcars, typically drawing power from a third rail, operating in separate rights-of-way in multiple cars; also referred to as subways, metros, or regional rail. High Threat Urban Area (HTUA) means...

49 CFR 1580.3 - Terms used in this part.

Code of Federal Regulations, 2010 CFR

2010-10-01

... uses diesel or electric powered locomotives and railroad passenger cars to serve an urban area, its... electric railcars, typically drawing power from a third rail, operating in separate rights-of-way in multiple cars; also referred to as subways, metros, or regional rail. High Threat Urban Area (HTUA) means...

Advanced technology applications for second and third generation coal gasification systems. Appendix

NASA Technical Reports Server (NTRS)

Bradford, R.; Hyde, J. D.; Mead, C. W.

1980-01-01

Sixteen coal conversion processes are described and their projected goals listed. Tables show the reactants used, products derived, typical operating data, and properties of the feed coal. A history of the development of each process is included along with a drawing of the chemical reactor used.

Wind tunnel model and method

NASA Technical Reports Server (NTRS)

Jackson, C. M., Jr.; Summerfield, D. G. (Inventor)

1974-01-01

The design and development of a wind tunnel model equipped with pressure measuring devices are discussed. The pressure measuring orifices are integrally constructed in the wind tunnel model and do not contribute to distortions of the aerodynamic surface. The construction of a typical model is described and a drawing of the device is included.

Tableau Economique: Teaching Economics with a Tablet Computer

ERIC Educational Resources Information Center

Scott, Robert H., III

2011-01-01

The typical method of instruction in economics is chalk and talk. Economics courses often require writing equations and drawing graphs and charts, which are all best done in freehand. Unlike static PowerPoint presentations, tablet computers create dynamic nonlinear presentations. Wireless technology allows professors to write on their tablets and…

Preschool Inclusion in the United States: A Review of Research from an Ecological Systems Perspective

ERIC Educational Resources Information Center

Odom, Samuel L.; Vitztum, Joann; Wolery, Ruth; Lieber, Joan; Sandall, Susan; Hanson, Marci J.; Beckman, Paula; Schwartz, Ilene; Horn, Eva

2004-01-01

Using an ecological systems conceptual framework proposed by Bronfenbrenner, research on the inclusion of preschool children with disabilities in programs with typically developing children was reviewed. Drawing mainly from studies conducted in the United States, research on child characteristics (biosystem), classroom practices (microsystem),…

Persuading and Dissuading by Conditional Argument

ERIC Educational Resources Information Center

Thompson, V.A.; Evans, J.St.B.T.; Handley, S.J.

2005-01-01

Informal reasoning typically draws on a wider range of inferential behaviour than is measured by traditional inference tasks. In this paper, we developed several tasks to study informal reasoning with two novel types of conditional statements: Persuasions (e.g., if the Kyoto accord is ratified, greenhouse gas emissions will be reduced) and…

Decoding Representations: How Children with Autism Understand Drawings

ERIC Educational Resources Information Center

Allen, Melissa L.

2009-01-01

Young typically developing children can reason about abstract depictions if they know the intention of the artist. Children with autism spectrum disorder (ASD), who are notably impaired in social, "intention monitoring" domains, may have great difficulty in decoding vague representations. In Experiment 1, children with ASD are unable to use…

Evidence for impairments in using static line drawings of eye gaze cues to orient visual-spatial attention in children with high functioning autism.

PubMed

Goldberg, Melissa C; Mostow, Allison J; Vecera, Shaun P; Larson, Jennifer C Gidley; Mostofsky, Stewart H; Mahone, E Mark; Denckla, Martha B

2008-09-01

We examined the ability to use static line drawings of eye gaze cues to orient visual-spatial attention in children with high functioning autism (HFA) compared to typically developing children (TD). The task was organized such that on valid trials, gaze cues were directed toward the same spatial location as the appearance of an upcoming target, while on invalid trials gaze cues were directed to an opposite location. Unlike TD children, children with HFA showed no advantage in reaction time (RT) on valid trials compared to invalid trials (i.e., no significant validity effect). The two stimulus onset asynchronies (200 ms, 700 ms) did not differentially affect these findings. The results suggest that children with HFA show impairments in utilizing static line drawings of gaze cues to orient visual-spatial attention.

Computations in the deep vs superficial layers of the cerebral cortex.

PubMed

Rolls, Edmund T; Mills, W Patrick C

2017-11-01

A fundamental question is how the cerebral neocortex operates functionally, computationally. The cerebral neocortex with its superficial and deep layers and highly developed recurrent collateral systems that provide a basis for memory-related processing might perform somewhat different computations in the superficial and deep layers. Here we take into account the quantitative connectivity within and between laminae. Using integrate-and-fire neuronal network simulations that incorporate this connectivity, we first show that attractor networks implemented in the deep layers that are activated by the superficial layers could be partly independent in that the deep layers might have a different time course, which might because of adaptation be more transient and useful for outputs from the neocortex. In contrast the superficial layers could implement more prolonged firing, useful for slow learning and for short-term memory. Second, we show that a different type of computation could in principle be performed in the superficial and deep layers, by showing that the superficial layers could operate as a discrete attractor network useful for categorisation and feeding information forward up a cortical hierarchy, whereas the deep layers could operate as a continuous attractor network useful for providing a spatially and temporally smooth output to output systems in the brain. A key advance is that we draw attention to the functions of the recurrent collateral connections between cortical pyramidal cells, often omitted in canonical models of the neocortex, and address principles of operation of the neocortex by which the superficial and deep layers might be specialized for different types of attractor-related memory functions implemented by the recurrent collaterals. Copyright © 2017 Elsevier Inc. All rights reserved.

JaxoDraw: A graphical user interface for drawing Feynman diagrams

NASA Astrophysics Data System (ADS)

Binosi, D.; Theußl, L.

2004-08-01

JaxoDraw is a Feynman graph plotting tool written in Java. It has a complete graphical user interface that allows all actions to be carried out via mouse click-and-drag operations in a WYSIWYG fashion. Graphs may be exported to postscript/EPS format and can be saved in XML files to be used for later sessions. One of JaxoDraw's main features is the possibility to create ? code that may be used to generate graphics output, thus combining the powers of ? with those of a modern day drawing program. With JaxoDraw it becomes possible to draw even complicated Feynman diagrams with just a few mouse clicks, without the knowledge of any programming language. Program summaryTitle of program: JaxoDraw Catalogue identifier: ADUA Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADUA Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Distribution format: tar gzip file Operating system: Any Java-enabled platform, tested on Linux, Windows ME, XP, Mac OS X Programming language used: Java License: GPL Nature of problem: Existing methods for drawing Feynman diagrams usually require some 'hard-coding' in one or the other programming or scripting language. It is not very convenient and often time consuming, to generate relatively simple diagrams. Method of solution: A program is provided that allows for the interactive drawing of Feynman diagrams with a graphical user interface. The program is easy to learn and use, produces high quality output in several formats and runs on any operating system where a Java Runtime Environment is available. Number of bytes in distributed program, including test data: 2 117 863 Number of lines in distributed program, including test data: 60 000 Restrictions: Certain operations (like internal latex compilation, Postscript preview) require the execution of external commands that might not work on untested operating systems. Typical running time: As an interactive program, the running time depends on the complexity of the diagram to be drawn.

Composite Megathrust Rupture From Deep Interplate to Trench of the 2016 Solomon Islands Earthquake

NASA Astrophysics Data System (ADS)

Lee, Shiann-Jong; Lin, Tzu-Chi; Feng, Kuan-Fu; Liu, Ting-Yu

2018-01-01

The deep plate boundary has usually been recognized as an aseismic area, with few large earthquakes occurring at the 60-100 km depth interface. In contrast, we use a finite-fault rupture model to demonstrate that large slip in the 2016 M7.9 Solomon Islands earthquake may have originated from the deep subduction interface and propagated all the way up to the trench. The initial rupture occurred at a depth of about 100 km, forming a deep asperity and then propagating updip to the middle-depth large coseismic slip area. Our proposed source model indicates that the depth-varying rupture characteristics of this event could shift to deeper depths with respect to other subduction zones. This result also implied that the deep subducting plate boundary could also be seismogenic, which might trigger rupture at the typical middle-depth stress-locked zone and develop into rare composite megathrust events.

Macrofouling of deep-sea instrumentation after three years at 3690 m depth in the Charlie Gibbs fracture zone, mid-Atlantic ridge, with emphasis on hydroids (Cnidaria: Hydrozoa)

NASA Astrophysics Data System (ADS)

Blanco, R.; Shields, M. A.; Jamieson, A. J.

2013-12-01

Macrofouling is a common problem when deploying underwater instrumentation for long periods of time. It is a problem which can effect scientific experiments and monitoring missions though the creation of artificial reefs (thus increasing local biological activity) and reduce the quality of scientific data. Macrofouling is an issue typically considered to be restricted to the photic zones and is absent or negligible in the deep sea. To the contrary, the recovery of an accidentally lost deep-sea lander after 3 years submergence at 3960 m on the Mid-Atlantic Ridge (North Atlantic) revealed dense colonisation of macrofouling organisms. These organisms were found attached to all surfaces of the lander regardless of orientation and materials. The occurrence of such deep-sea macrofouling should be carefully investigated given the recent developments in long-term deep-sea observatory networks.

Surface temperatures and temperature gradient features of the US Gulf Coast waters

NASA Technical Reports Server (NTRS)

Huh, O. K.; Rouse, L. J., Jr.; Smith, G. W.

1977-01-01

Satellite thermal infrared data on the Gulf of Mexico show that a seasonal cycle exists in the horizontal surface temperature structure. In the fall, the surface temperatures of both coastal and deep waters are nearly uniform. With the onset of winter, atmospheric cold fronts, which are accompanied by dry, low temperature air and strong winds, draw heat from the sea. A band of cooler water forming on the inner shelf expands, until a thermal front develops seaward along the shelf break between the cold shelf waters and the warmer deep waters of the Gulf. Digital analysis of the satellite data was carried out in an interactive mode using a minicomputer and software. A time series of temperature profiles illustrates the temporal and spatial changes in the sea-surface temperature field.

Chlorine condenser-evaporator simulation

NASA Astrophysics Data System (ADS)

Muraveva, E. A.

2017-10-01

Refrigeration machines are an integral part of chemical engineering. Coldness in mechanical engineering is used to improve the properties of steels, to stabilize the shape and size of steel parts, to restore the dimensions of worn steel hardened parts, to fasten the parts to be machined during cutting and grinding, to ensure fixed planting during assembly, bending pipelines, deep drawing and stamping parts from sheet materials, in the manufacture and processing of rubber parts, with solid anodizing of aluminum alloy parts.

Metal flow of a tailor-welded blank in deep drawing process

NASA Astrophysics Data System (ADS)

Yan, Qi; Guo, Ruiquan

2005-01-01

Tailor welded blanks were used in the automotive industry to consolidate parts, reduce weight, and increase safety. In recent years, this technology was developing rapidly in China. In Chinese car models, tailor welded blanks had been applied in a lot of automobile parts such as rail, door inner, bumper, floor panel, etc. Concerns on the properties of tailor welded blanks had become more and more important for automobile industry. A lot of research had shown that the strength of the welded seam was higher than that of the base metal, such that the weld failure in the aspect of strength was not a critical issue. However, formability of tailor welded blanks in the stamping process was complex. Among them, the metal flow of tailor welded blanks in the stamping process must be investigated thoroughly in order to reduce the scrap rate during the stamping process in automobile factories. In this paper, the behavior of metal flow for tailor welded blanks made by the laser welding process with two types of different thickness combinations were studied in the deep drawing process. Simulations and experiment verification of the movement of weld line for tailor welded blanks were discussed in detail. Results showed that the control on the movement of welded seam during stamping process by taking some measures in the aspect of blank holder was effective.

DANoC: An Efficient Algorithm and Hardware Codesign of Deep Neural Networks on Chip.

PubMed

Zhou, Xichuan; Li, Shengli; Tang, Fang; Hu, Shengdong; Lin, Zhi; Zhang, Lei

2017-07-18

Deep neural networks (NNs) are the state-of-the-art models for understanding the content of images and videos. However, implementing deep NNs in embedded systems is a challenging task, e.g., a typical deep belief network could exhaust gigabytes of memory and result in bandwidth and computational bottlenecks. To address this challenge, this paper presents an algorithm and hardware codesign for efficient deep neural computation. A hardware-oriented deep learning algorithm, named the deep adaptive network, is proposed to explore the sparsity of neural connections. By adaptively removing the majority of neural connections and robustly representing the reserved connections using binary integers, the proposed algorithm could save up to 99.9% memory utility and computational resources without undermining classification accuracy. An efficient sparse-mapping-memory-based hardware architecture is proposed to fully take advantage of the algorithmic optimization. Different from traditional Von Neumann architecture, the deep-adaptive network on chip (DANoC) brings communication and computation in close proximity to avoid power-hungry parameter transfers between on-board memory and on-chip computational units. Experiments over different image classification benchmarks show that the DANoC system achieves competitively high accuracy and efficiency comparing with the state-of-the-art approaches.

Using chloride and chlorine-36 as soil-water tracers to estimate deep percolation at selected locations on the U.S. Department of Energy Hanford Site, Washington

USGS Publications Warehouse

Prych, Edmund A.

1998-01-01

A chloride mass-balance method and a chlorine-36 isotope bomb-pulse method were used to estimate long-term average rates of deep percolation at at the U.S. Department of Energy Hanford Site. Because the bomb-pulse method typically gives an upper limit and the mass-balance method may underestimate, estimates from both methods probably bracket actual rates.

Infragravity waves in the deep ocean: An upward revision

NASA Astrophysics Data System (ADS)

Aucan, J.; Ardhuin, F.

2013-07-01

Ocean infragravity waves are surface gravity waves with periods of several minutes and corresponding wavelengths of up to tens of kilometers. When propagating freely in the deep ocean, these waves are typically small, several centimeters at most, so they have been seldom studied. In the context of future wide-swath altimetry missions, these waves need to be better quantified as they have wavelengths that will be resolved by such instruments. Here, we analyze the global climatology and variability of infragravity waves in the deep ocean using data from over 40 open ocean locations, with depths larger than 2000 m. We show that typical infragravity wave heights are higher than previously estimated, with winter-averaged values up to 11 mm off the U.S. West Coast, and typically less than 6 mm in the tropics. The mid to high latitudes exhibit a strong seasonal cycle consistent with the local variability of the wind-waves, while the tropical Pacific has a higher energy level during the Austral winter that does not correlate well with the local wind-waves, suggesting a remote source for the recorded infragravity waves. These infragravity wave energies are expected to be a significant contribution to the error budget for possible measurements of sea level associated to sub-mesoscale currents at horizontal scales around 10 km. Hence, a global numerical model of infragravity waves will likely be necessary for the analysis of the planned Surface Water Ocean Topography mission.

Learning and Development Expertise: An Australian Analysis

ERIC Educational Resources Information Center

Hodge, Steven; Harvey, Jack

2015-01-01

Learning and development (L&D) practitioners draw on a distinctive range of knowledge, skills and techniques in their work. Over the years, there have been attempts to capture this range and identify typical L&D roles. The research presented here was undertaken to identify characteristic areas of expertise (AOEs) of L&D practice in…

School-Based Curriculum Development in Scotland: Curriculum Policy and Enactment

ERIC Educational Resources Information Center

Priestley, Mark; Minty, Sarah; Eager, Michelle

2014-01-01

Recent worldwide trends in curriculum policy have re-emphasised the role of teachers in school-based curriculum development. Scotland's Curriculum for Excellence is typical of these trends, stressing that teachers are agents of change. This paper draws upon empirical data to explore school-based curriculum development in response to Curriculum for…

7 CFR Exhibit C to Subpart C of... - Checklist of Visual Exhibits and Documentation for RRH, RCH, and LH Proposals

Code of Federal Regulations, 2012 CFR

2012-01-01

... design drawings showing the proposed plot plan, typical unit plans, and elevations. If available, the... locations with profiles and widths, lot layouts, major drainageways, and other development planned... the Obligation of Funds. All decisions regarding the conceptual design of the proposed project should...

7 CFR Exhibit C to Subpart C of... - Checklist of Visual Exhibits and Documentation for RRH, RCH, and LH Proposals

Code of Federal Regulations, 2011 CFR

2011-01-01

... design drawings showing the proposed plot plan, typical unit plans, and elevations. If available, the... locations with profiles and widths, lot layouts, major drainageways, and other development planned... the Obligation of Funds. All decisions regarding the conceptual design of the proposed project should...

Textual Encounters and Pedagogic Interventions

ERIC Educational Resources Information Center

Vicars, Mark

2009-01-01

School, typically, is no place to be caught being queer and knowledge about homosexuality for the majority of young lesbian, gay and bisexual people is routinely constructed within communities of practice. In this paper, I draw upon my own and others' literacy practices to show how our identities and readings of texts were framed by being…

Short Skirts and Breast Juts: Cheerleading, Eroticism and Schools

ERIC Educational Resources Information Center

Bettis, Pamela J.; Adams, Natalie Guice

2006-01-01

Cheerleading, an American invention, has 3.8 million participants in the United States, 97% of whom are female. It is an adult-sanctioned and typically school-affiliated activity that remains popular in spite of the increase in sports' opportunities for girls in schools. Drawing from popular culture and a middle school ethnography, the authors…

Social Capital Practices as Adaptive Drivers for Local Adjustment of New Public Management in Schools

ERIC Educational Resources Information Center

Olesen, Kristian Gylling; Hasle, Peter; Sørensen, Ole H.

2016-01-01

New public management (NPM) reforms have typically undermined teachers' autonomy, values, and status in society. This article questions whether such reforms automatically have these outcomes or whether and how possibilities for local adjustment of such reforms may prevent negative outcomes. Drawing on empirical case studies from two Danish…

Parents, Friends, and Romantic Partners: Enmeshment in Deviant Networks and Adolescent Delinquency Involvement

ERIC Educational Resources Information Center

Lonardo, Robert A.; Giordano, Peggy C.; Longmore, Monica A.; Manning, Wendy D.

2009-01-01

Adolescent networks include parents, friends, and romantic partners, but research on the social learning mechanisms related to delinquency has not typically examined the characteristics of all three domains simultaneously. Analyses draw on data from the Toledo Adolescent Relationships Study (n = 957), and our analytic sample contains 51% male and…

Attentional Capture by Deviant Sounds: A Noncontingent Form of Auditory Distraction?

ERIC Educational Resources Information Center

Vachon, François; Labonté, Katherine; Marsh, John E.

2017-01-01

The occurrence of an unexpected, infrequent sound in an otherwise homogeneous auditory background tends to disrupt the ongoing cognitive task. This "deviation effect" is typically explained in terms of attentional capture whereby the deviant sound draws attention away from the focal activity, regardless of the nature of this activity.…

Synchrony and Specificity in the Maternal and the Paternal Brain: Relations to Oxytocin and Vasopressin

ERIC Educational Resources Information Center

Atzil, Shir; Hendler, Talma; Zagoory-Sharon, Orna; Winetraub, Yonatan; Feldman, Ruth

2012-01-01

Objective: Research on the neurobiology of parenting has defined "biobehavioral synchrony," the coordination of biological and behavioral responses between parent and child, as a central process underpinning mammalian bond formation. Bi-parental rearing, typically observed in monogamous species, is similarly thought to draw on mechanisms of…

Disciplinary Literacy in History: A Toolkit for Digital Citizenship

ERIC Educational Resources Information Center

Wineburg, Sam; Reisman, Abby

2015-01-01

In this article, we draw clear distinctions between generic reading comprehension and disciplinary literacy in history. We argue that disciplinary reading restores agency to the reader, changing the typical relationship between text and reader, in which knowledge flows down from one to the other. Sourcing, for example, enjoins readers to engage…

Development of Gender Discrimination: Role of Stereotypic and Counterstereotypic Gender Cues.

ERIC Educational Resources Information Center

Etaugh, Claire; Duits, Terri

1990-01-01

A group of 76 male and female toddlers identified drawings depicting boys and girls alone or with sex-typical or sex-atypical toys by responding "girl" or "boy,""girls' toy" or "boys' toy." The youngest girls outperformed the youngest boys in identifying toys. Otherwise, responses in general improved with…

Succeeding in the City: Challenges and Best Practices on Urban Commuter Campuses

ERIC Educational Resources Information Center

Clark, Marcia Roe

2006-01-01

The work of helping students succeed on urban commuter campuses may be some of the most complicated in higher education. Even in understanding their tasks, educators at city-based institutions must typically draw on research and practice from an amalgam of other types of institutions, including community colleges, metropolitan universities, urban…

School Participation among Immigrant Youths: The Case of Segmented Assimilation in the Early 20th Century

ERIC Educational Resources Information Center

Sassier, Sharon L.

2006-01-01

Research on the educational enrollment of immigrants has typically asserted that today's immigrant children are educationally disadvantaged and that earlier waves of immigrants were more readily absorbed into the American educational system. This article addresses these assumptions, drawing on traditional assimilationist and status competition…

Plus C'est La Même Chose: Joinery Apprenticeship Arrangements in Scotland

ERIC Educational Resources Information Center

Anderson, Pauline

2014-01-01

This paper examines recent changes in the Scottish apprenticeship system of skill formation for joiners through an occupational skill ecosystem lens. Building trade apprenticeships in Scotland are based around a social partnership model more akin to "dual systems" than typical arrangements elsewhere in the UK. Drawing on in-depth…

Problem-Solving Processes of Expert and Typical School Principals: A Quantitative Look

ERIC Educational Resources Information Center

Brenninkmeyer, Lawrence D.; Spillane, James P.

2008-01-01

Principals are increasingly expected to be the instructional as well as administrative leaders of their schools. However, little is known about how principals reason through the instructional issues that they face. An analysis of principal reasoning in instructional contexts is critical. The study presented in this article draws on interviews with…

Worlds Apart? English in German Youth Cultures and in Educational Settings

ERIC Educational Resources Information Center

Grau, Maike

2009-01-01

This paper focuses on German teenagers and their contact with English in two different contexts: in free-time activities typically involving the mass media, and in institutionalised language learning settings at school. It draws on an empirical study carried out in German secondary schools. Its mixed methods approach combines a questionnaire study…

La Artesania Mexicana (Mexican Handicrafts).

ERIC Educational Resources Information Center

Steele, Bettina

This booklet contains instructions in English and Spanish for making eleven typical Mexican craft articles. The instructions are accompanied by pen-and-ink drawings. The objects are (1) "La Rosa" (The Rose); (2) "El Crisantemo" (The Chrysanthemum); (3) "La Amapola" (The Poppy); (4) "Ojos de Dios" (God's Eyes); (5) "Ojitos con dos caras" (Two-Sided…

Semantic Memory and Verbal Working Memory Correlates of N400 to Subordinate Homographs

ERIC Educational Resources Information Center

Salisbury, Dean F.

2004-01-01

N400 is an event-related brain potential that indexes operations in semantic memory conceptual space, whether elicited by language or some other representation (e.g., drawings). Language models typically propose three stages: lexical access or orthographic- and phonological-level analysis; lexical selection or word-level meaning and associate…

Life Story Reflection in Social Work Education: A Practical Model

ERIC Educational Resources Information Center

Spector-Mersel, Gabriela

2017-01-01

Drawing from the practice-oriented conception of reflection in social work, its applications in social work education typically focus on students' encounters with the field. Recognizing the value of practice-oriented reflection yet aware of its limitations, complementing it with life story reflection (LSR) is urged. The importance of LSR in social…

390. Delineator Unknown October 1933 STATE OF CALIFORNIA; DEPARTMENT OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

390. Delineator Unknown October 1933 STATE OF CALIFORNIA; DEPARTMENT OF PUBLIC WORKS; SAN FRANCISCO - OAKLAND BAY BRIDGE; SUPERSTRUCTURE - EAST BAY CROSSING; SPANS YBI TO El - E9 TO El ; TYPICAL CROSSSECTION; CONTRACT NO. 7; SUP. DRAWING NO. 82 - San Francisco Oakland Bay Bridge, Spanning San Francisco Bay, San Francisco, San Francisco County, CA

Effect of the Yield Stress and r-value Distribution on the Earing Profile of Cup Drawing with Yld2000-2d Yield Function

NASA Astrophysics Data System (ADS)

Lou, Yanshan; Bae, Gihyun; Lee, Changsoo; Huh, Hoon

2010-06-01

This paper deals with the effect of the yield stress and r-value distribution on the earing in the cup drawing. The anisotropic yield function, Yld2000-2d yield function, is selected to describe the anisotropy of two metal sheets, 719B and AA5182-O. The tool dimension is referred from the Benchmark problem of NUMISHEET'2002. The Downhill Simplex method is applied to identify the anisotropic coefficients in Yld2000-2d yield function. Simulations of the drawing process are performed to investigate the earing profile of two materials. The earing profiles obtained from simulations are compared with the analytical model developed by Hosford and Caddell. Simulations are conducted with respect to the change of the yield stress and r-value distribution, respectively. The correlation between the anisotropy and the earing tendency is investigated based on simulation data. Finally, the earing mechanism is analyzed through the deformation process of the blank during the cup deep drawing. It can be concluded that ears locate at angular positions with lower yield stress and higher r-value while the valleys appear at the angular position with higher yield stress and lower r-value. The effect of the yield stress distribution is more important for the cup height distribution than that of the r-value distribution.

The Feasibility and Benefits of In Situ Exploration of `Oumuamua-like objects

NASA Astrophysics Data System (ADS)

Seligman, Darryl; Laughlin, Gregory

2018-04-01

A rapid accumulation of observations and interpretation have followed in the wake of 1I `Oumuamua's passage through the inner Solar System. We outline the consequences that this first detection of an interstellar asteroid implies for the planet-forming process, and we assess the near-term prospects for detecting and observing (both remotely and \\textit{in situ}) future Solar System visitors of this type. Drawing on detailed heat-transfer calculations that take both `Oumuamua's unusual shape and its chaotic tumbling into account, we affirm that the lack of a detectable coma in deep images of the object very likely arises from the presence of a radiation-modified coating of high molecular weight material (rather than a refractory bulk composition). Assuming that `Oumuamua is a typical representative of a larger population with a kinematic distribution similar to Population I stars in the local galactic neighborhood, we calculate expected arrival rates, impact parameters and velocities of similar objects and assess their prospects for detection using operational and forthcoming facilities. Using `Oumuamua as a proof-of-concept, we assess the prospects for missions that intercept ISOs using conventional chemical propulsion. Using a ``launch on detection'' paradigm, we estimate wait times of order a year between favorable mission opportunities with the detection capabilities of the Large-Scale Synoptic Survey Telescope (LSST), a figure that will be refined as the population of interstellar asteroids becomes observationally better constrained.

A randomized controlled trial of intensive neurophysiology education in chronic low back pain.

PubMed

Moseley, G Lorimer; Nicholas, Michael K; Hodges, Paul W

2004-01-01

Cognitive-behavioral pain management programs typically achieve improvements in pain cognitions, disability, and physical performance. However, it is not known whether the neurophysiology education component of such programs contributes to these outcomes. In chronic low back pain patients, we investigated the effect of neurophysiology education on cognitions, disability, and physical performance. This study was a blinded randomized controlled trial. Individual education sessions on neurophysiology of pain (experimental group) and back anatomy and physiology (control group) were conducted by trained physical therapist educators. Cognitions were evaluated using the Survey of Pain Attitudes (revised) (SOPA(R)), and the Pain Catastrophizing Scale (PCS). Behavioral measures included the Roland Morris Disability Questionnaire (RMDQ), and 3 physical performance tasks; (1) straight leg raise (SLR), (2) forward bending range, and (3) an abdominal "drawing-in" task, which provides a measure of voluntary activation of the deep abdominal muscles. Methodological checks evaluated non-specific effects of intervention. There was a significant treatment effect on the SOPA(R), PCS, SLR, and forward bending. There was a statistically significant effect on RMDQ; however, the size of this effect was small and probably not clinically meaningful. Education about pain neurophysiology changes pain cognitions and physical performance but is insufficient by itself to obtain a change in perceived disability. The results suggest that pain neurophysiology education, but not back school type education, should be included in a wider pain management approach.

Aggression in low functioning children and adolescents with autistic disorder.

PubMed

Bronsard, Guillaume; Botbol, Michel; Tordjman, Sylvie

2010-12-21

Parents, caregivers and mental health professionals have often reported violence and aggression in children or adolescents with autistic disorder. However, most of these observations derived from anecdotal reports, and studies on frequency and characterization of aggression in autism remain limited. Our objective was to better characterize and understand the different types of aggressive behaviors displayed by a large group of individuals with autism in different observational situations. The study was conducted on 74 children and adolescents with autism and 115 typically developing control individuals matched for sex, age and pubertal stage. Other-Injurious Behaviors (OIB) were assessed in three observational situations (parents at home, two caregivers at day-care, a nurse and a child psychiatrist during blood drawing) using validated scales. The frequency of OIB was significantly higher in individuals with autism compared to typically developing control individuals during the blood drawing (23% vs. 0%, P<0 .01). The parents observed significantly less OIB in their children than caregivers (34% vs. 58%, P<0.05). In addition, the most frequent concurrent behaviors occurring just before the appearance of OIB in individuals with autism were anxiety-related behaviors and excitation according to the parental as well as the caregiver observation. The results suggest that in a stressful situation, such as the blood drawing, individuals with autism release their stress through behaviors such as OIB, whereas typically developing individuals regulate and express their stress through cognitive skills such as mental coping strategies, symbolization skills with representation and anticipation of the stressful situation, social interaction and verbal or non-verbal communication. The findings underline also the key role of the environment in assessing OIB and developing therapeutic perspectives, with an individual who modulates his/her behavior according to the environment, and an environment that perceives this behavior and reacts to it with different tolerance thresholds according to the observers.

Aggression in Low Functioning Children and Adolescents with Autistic Disorder

PubMed Central

Bronsard, Guillaume; Botbol, Michel; Tordjman, Sylvie

2010-01-01

Background Parents, caregivers and mental health professionals have often reported violence and aggression in children or adolescents with autistic disorder. However, most of these observations derived from anecdotal reports, and studies on frequency and characterization of aggression in autism remain limited. Our objective was to better characterize and understand the different types of aggressive behaviors displayed by a large group of individuals with autism in different observational situations. Methodology/Findings The study was conducted on 74 children and adolescents with autism and 115 typically developing control individuals matched for sex, age and pubertal stage. Other-Injurious Behaviors (OIB) were assessed in three observational situations (parents at home, two caregivers at day-care, a nurse and a child psychiatrist during blood drawing) using validated scales. The frequency of OIB was significantly higher in individuals with autism compared to typically developing control individuals during the blood drawing (23% vs. 0%, P<0 .01). The parents observed significantly less OIB in their children than caregivers (34% vs. 58%, P<0.05). In addition, the most frequent concurrent behaviors occurring just before the appearance of OIB in individuals with autism were anxiety-related behaviors and excitation according to the parental as well as the caregiver observation. Conclusions/Significance The results suggest that in a stressful situation, such as the blood drawing, individuals with autism release their stress through behaviors such as OIB, whereas typically developing individuals regulate and express their stress through cognitive skills such as mental coping strategies, symbolization skills with representation and anticipation of the stressful situation, social interaction and verbal or non-verbal communication. The findings underline also the key role of the environment in assessing OIB and developing therapeutic perspectives, with an individual who modulates his/her behavior according to the environment, and an environment that perceives this behavior and reacts to it with different tolerance thresholds according to the observers. PMID:21200441

The role of affect in consumer evaluation of health care services.

PubMed

Ng, Sandy; Russell-Bennett, Rebekah

2015-01-01

Health care services are typically consumed out of necessity, typically to recover from illness. While the consumption of health care services can be emotional given that consumers experience fear, hope, relief, and joy, surprisingly, there is little research on the role of consumer affect in health care consumption. We propose that consumer affect is a heuristic cue that drives evaluation of health care services. Drawing from cognitive appraisal theory and affect-as-information theory, this article tests a research model (N = 492) that investigates consumer affect resulting from service performance on subsequent service outcomes.

Did hydrographic sampling capture global and regional deep ocean heat content trends accurately between 1990-2010?

NASA Astrophysics Data System (ADS)

Garry, Freya; McDonagh, Elaine; Blaker, Adam; Roberts, Chris; Desbruyères, Damien; King, Brian

2017-04-01

Estimates of heat content change in the deep oceans (below 2000 m) over the last thirty years are obtained from temperature measurements made by hydrographic survey ships. Cruises occupy the same tracks across an ocean basin approximately every 5+ years. Measurements may not be sufficiently frequent in time or space to allow accurate evaluation of total ocean heat content (OHC) and its rate of change. It is widely thought that additional deep ocean sampling will also aid understanding of the mechanisms for OHC change on annual to decadal timescales, including how OHC varies regionally under natural and anthropogenically forced climate change. Here a 0.25˚ ocean model is used to investigate the magnitude of uncertainties and biases that exist in estimates of deep ocean temperature change from hydrographic sections due to their infrequent timing and sparse spatial distribution during 1990 - 2010. Biases in the observational data may be due to lack of spatial coverage (not enough sections covering the basin), lack of data between occupations (typically 5-10 years apart) and due to occupations not closely spanning the time period of interest. Between 1990 - 2010, the modelled biases globally are comparatively small in the abyssal ocean below 3500 m although regionally certain biases in heat flux into the 4000 - 6000 m layer can be up to 0.05 Wm-2. Biases in the heat flux into the deep 2000 - 4000 m layer due to either temporal or spatial sampling uncertainties are typically much larger and can be over 0.1 Wm-2 across an ocean. Overall, 82% of the warming trend below 2000 m is captured by observational-style sampling in the model. However, at 2500 m (too deep for additional temperature information to be inferred from upper ocean Argo) less than two thirds of the magnitude of the global warming trend is obtained, and regionally large biases exist in the Atlantic, Southern and Indian Oceans, highlighting the need for widespread improved deep ocean temperature sampling. In addition to bias due to infrequent sampling, moving the timings of occupations by a few months generates relatively large uncertainty due to intra-annual variability in deep ocean model temperature, further strengthening the case for high temporal frequency observations in the deep ocean (as could be achieved using deep ocean autonomous float technologies). Biases due to different uncertainties can have opposing signs and differ in relative importance both regionally and with depth revealing the importance of reducing all uncertainties (both spatial and temporal) simultaneously in future deep ocean observing design.

Study of the influence of selected anisotropic parameter in the Barlat's model on the drawpiece shape

NASA Astrophysics Data System (ADS)

Kaldunski, Pawel; Kukielka, Leon; Patyk, Radoslaw; Kulakowska, Agnieszka; Bohdal, Lukasz; Chodor, Jaroslaw; Kukielka, Krzysztof

2018-05-01

In this paper, the numerical analysis and computer simulation of deep drawing process has been presented. The incremental model of the process in updated Lagrangian formulation with the regard of the geometrical and physical nonlinearity has been evaluated by variational and the finite element methods. The Frederic Barlat's model taking into consideration the anisotropy of materials in three main and six tangents directions has been used. The work out application in Ansys/Ls-Dyna program allows complex step by step analysis and prognoses: the shape, dimensions and state stress and strains of drawpiece. The paper presents the influence of selected anisotropic parameter in the Barlat's model on the drawpiece shape, which includes: height, sheet thickness and maximum drawing force. The important factors determining the proper formation of drawpiece and the ways of their determination have been described.

Initial study of deep inelastic scattering with ZEUS at HERA

NASA Astrophysics Data System (ADS)

Derrick, M.; Krakauer, D.; Magill, S.; Musgrave, B.; Repond, J.; Repond, S.; Stanek, R.; Talaga, R. L.; Thron, J.; Arzarello, F.; Ayad, R.; Barbagli, G.; Bari, G.; Basile, M.; Bellagamba, L.; Boscherini, D.; Bruni, A.; Bruni, G.; Bruni, P.; Cara Romeo, G.; Castellini, G.; Chiarini, M.; Cifarelli, L.; Cindolo, F.; Ciralli, F.; Contin, A.; D'Auria, S.; del Papa, C.; Frasconi, F.; Giusti, P.; Iacobucci, G.; Laurenti, G.; Levi, G.; Lin, Q.; Lisowski, B.; Maccarrone, G.; Margotti, A.; Massam, T.; Nania, R.; Nemoz, C.; Palmonari, F.; Sartorelli, G.; Timellini, R.; Zamora Garcia, Y.; Zichichi, A.; Bargende, A.; Crittenden, J.; Dabbous, H.; Desch, K.; Diekmann, B.; Doeker, T.; Geerts, M.; Geitz, G.; Gutjahr, B.; Hartmann, H.; Hartmann, J.; Haun, D.; Heinloth, K.; Hilger, E.; Jakob, H.-P.; Kramarczyk, S.; Kückes, M.; Mass, A.; Mengel, S.; Mollen, J.; Monaldi, D.; Müsch, H.; Paul, E.; Schattevoy, R.; Schneider, J.-L.; Wedemeyer, R.; Cassidy, A.; Cussans, D. G.; Dyce, N.; Fawcett, H. F.; Foster, B.; Gilmore, R.; Heath, G. P.; Lancaster, M.; Llewellyn, T. J.; Malos, J.; Morgado, C. J. S.; Tapper, R. J.; Wilson, S. S.; Rau, R. R.; Barillari, T.; Schioppa, M.; Susinno, G.; Bernstein, A.; Caldwell, A.; Gialas, I.; Parsons, J. A.; Ritz, S.; Sciulli, F.; Straub, P. B.; Wai, L.; Yang, S.; Burkot, W.; Eskreys, A.; Piotrzkowski, K.; Zachara, M.; Zawiejski, L.; Borzemski, P.; Jeleń, K.; Kisielewska, D.; Kowalski, T.; Rulikowska-Zerȩbska, E.; Suszycki, L.; Zajc, J.; Kȩdzierski, T.; Kotański, A.; Przybycień, M.; Bauerdick, L. A. T.; Behrens, U.; Bienlein, J. K.; Coldewey, C.; Dannemann, A.; Dierks, K.; Dorth, W.; Drews, G.; Erhard, P.; Flasiński, M.; Fleck, I.; Fürtjes, A.; Gläser, R.; Göttlicher, P.; Hass, T.; Hagge, L.; Hain, W.; Hasell, D.; Hultschig, H.; Jahnen, G.; Joos, P.; Kasemann, M.; Klanner, R.; Koch, W.; Kötz, U.; Kowalski, H.; Labs, J.; Ladage, A.; Löhr, B.; Lüke, D.; Mainusch, J.; Manczak, O.; Momayezi, M.; Ng, J. S. T.; Nicel, S.; Notz, D.; Park, I. H.; Pösnecker, K.-U.; Rohde, M.; Ros, E.; Schneekloth, S.; Schroeder, J.; Schulz, W.; Selonke, F.; Stiliaris, E.; Tscheslog, E.; Tsurugai, T.; Turkot, F.; Vogel, W.; Woeniger, T.; Wolf, G.; Youngman, C.; Grabosch, H. J.; Leich, A.; Meyer, A.; Rethfeldt, C.; Schlensthdt, S.; Casalbuoni, R.; de Curtis, S.; Dominici, D.; Francescato, A.; Nuti, M.; Pelfer, P.; Anzivino, G.; Casaccia, R.; de Pasquale, S.; Qian, S.; Votano, L.; Bamberger, A.; Freidhof, A.; Poser, T.; Söldner-Rembold, S.; Theisen, G.; Trefzger, T.; Brook, N. H.; Bussey, P. J.; Doyle, A. T.; Forbes, J. R.; Jamieson, V. A.; Raine, C.; Saxon, D. H.; Brückmann, H.; Gloth, G.; Holm, U.; Kammerdocher, H.; Krebs, B.; Neumann, T.; Wick, K.; Hofmann, A.; Kröger, W.; Krüger, J.; Lohrmann, E.; Milewski, J.; Nakahata, M.; Pavel, N.; Poelz, G.; Salomon, R.; Seidman, A.; Schott, W.; Wiik, B. H.; Zetsche, F.; Bacon, T. C.; Butterworth, I.; Markou, C.; McQuillan, D.; Miller, D. B.; Mobayyen, M. M.; Prinias, A.; Vorvolakos, A.; Bienz, T.; Kreutzmann, H.; Mallik, U.; McCliment, E.; Roco, M.; Wang, M. Z.; Cloth, P.; Filges, D.; Chen, L.; Imlay, R.; Kartik, S.; Kim, H.-J.; McNeil, R. R.; Metcalf, W.; Barreiro, F.; Cases, G.; Hervás, L.; Labarga, L.; del Peso, J.; Roldán, J.; Terrón, J.; de Trocóniz, J. F.; Ikraiam, F.; Mayer, J. K.; Smith, G. R.; Corriveau, F.; Gilkinson, D. J.; Hanna, D. S.; Hung, L. W.; Mitchell, J. W.; Patel, P. M.; Sinclair, L. E.; Stairs, D. G.; Ullmann, R.; Bashindzhagyan, G. L.; Ermolov, P. F.; Golubkov, Y. A.; Kuzmin, V. A.; Kuznetsov, E. N.; Savin, A. A.; Voronin, A. G.; Zotov, N. P.; Bentvelsen, S.; Dake, A.; Engelen, J.; de Jong, P.; de Jong, S.; de Kamps, M.; Kooijman, P.; Kruse, A.; van der Lugt, H.; O'dell, V.; Straver, J.; Tenner, A.; Tiecke, H.; Uijterwaal, H.; Vermeulen, J.; Wiggers, L.; de Wolf, E.; van Woudenberg, R.; Yoshida, R.; Bylsma, B.; Durkin, L. S.; Li, C.; Ling, T. Y.; McLean, K. W.; Murray, W. N.; Park, S. K.; Romanowski, T. A.; Seidlein, R.; Blair, G. A.; Butterworth, J. M.; Byrne, A.; Cashmore, R. J.; Cooper-Sarkar, A. M.; Devenish, R. C. E.; Gingrich, D. M.; Hallam-Baker, P. M.; Harnew, N.; Khatri, T.; Long, K. R.; Luffman, P.; McArthur, I.; Morawitz, P.; Nash, J.; Smith, S. J. P.; Roocroft, N. C.; Wilson, F. F.; Abbiendi, G.; Brugnera, R.; Carlin, R.; dal Corso, F.; de Giorgi, M.; Dosselli, U.; Gasparini, F.; Limentani, S.; Morandin, M.; Posocco, M.; Stanco, L.; Stroili, R.; Voci, C.; Field, G.; Lim, J. N.; Oh, B. Y.; Whitmore, J.; Contino, U.; D'Agostini, G.; Guida, M.; Iori, M.; Mari, S. M.; Marini, G.; Mattioli, M.; Nigro, A.; Hart, J. C.; McCubbin, N. A.; Shah, T. P.; Short, T. L.; Barberis, E.; Cartiglia, N.; Heusch, C.; Hubbard, B.; Leslie, J.; O'Shaughnessy, K.; Sadrozinski, H. F.; Seiden, A.; Badura, E.; Biltzinger, J.; Chaves, H.; Rost, M.; Seifert, R. J.; Walenta, A. H.; Weihs, W.; Zech, G.; Dagan, S.; Levy, A.; Zer-Zion, D.; Hasegawa, T.; Hazumi, M.; Ishii, T.; Kasai, S.; Kuze, M.; Nagasawa, Y.; Nakao, M.; Okuno, H.; Tokushuku, K.; Watanabe, T.; Yamada, S.; Chiba, M.; Hamatsu, R.; Hirose, T.; Kitamura, S.; Nagayama, S.; Nakamitsu, Y.; Arneodo, M.; Costa, M.; Ferrero, M. I.; Lamberti, L.; Maselli, S.; Peroni, C.; Solano, A.; Staiano, A.; Dardo, M.; Bailey, D. C.; Bandyopadhyay, D.; Benard, F.; Bhadra, S.; Brkic, M.; Burow, B. D.; Chlebana, F. S.; Crombie, M. B.; Hartner, G. F.; Levman, G. M.; Martin, J. F.; Orr, R. S.; Prentice, J. D.; Sampson, C. R.; Stairs, G. G.; Teuscher, R. J.; Yoon, T.-S.; Bullock, F. W.; Catterall, C. D.; Giddings, J. C.; Jones, T. W.; Khan, A. M.; Lane, J. B.; Makkar, P. L.; Shaw, D.; Shulman, J.; Blankenship, K.; Gibaut, D. B.; Kochocki, J.; Lu, B.; Mo, L. W.; Charchula, K.; Ciborowski, J.; Gajewski, J.; Grzelak, G.; Kasprzak, M.; Krzyżanowski, M.; Muchorowski, K.; Nowak, R. J.; Pawlak, J. M.; Stojda, K.; Stopczyński, A.; Szwed, R.; Tymieniecka, T.; Walczak, R.; Wróblewski, A. K.; Zakrzewski, J. A.; Zarnecki, A. F.; Adamus, M.; Abramowicz, H.; Eisenberg, Y.; Glasman, C.; Karshon, U.; Montag, A.; Revel, D.; Shapira, A.; Ali, I.; Behrens, B.; Camerini, U.; Dasu, S.; Fordham, C.; Foudas, C.; Goussiou, A.; Lomperski, M.; Loveless, R. J.; Nylander, P.; Ptacek, M.; Reeder, D. D.; Smith, W. H.; Silverstein, S.; Frisken, W. R.; Furutani, K. M.; Iga, Y.

1993-04-01

Results are presented on neutral current, deep inelastic scattering measured in collisions of 26.7 GeV electrons and 820 GeV protons. The events typically populate a range in Q2 from 10 to 100 GeV2. The values of x extend down to x ~ 10-4 which is two orders of magnitude lower than previously measured at such Q2 values in fixed target experiments. The measured cross sections are in accord with the extrapolations of current parametrisations of parton distributions.

Ship Fracture Mechanisms Investigation. Part 1

DTIC Science & Technology

1987-01-01

fractography of the fracture origin areas was atteinpted by Pense at Lehigh Univers-ty but in no case were the surfaces sufficiently clean to permit good...Typically, they arc a deprc.sion or notch no more than 0.25 inches deep , and in some cases appear to be even smaller. It was not possible to determine if any...perpendiculars: 880.5 ft Breadth (molded): 105.5 ft Depth amidship: 65.25 ft Displacement ( deep load line): 50,315 LT Year built: 1972 (foreign built

Optimizing Chemical Reactions with Deep Reinforcement Learning.

PubMed

Zhou, Zhenpeng; Li, Xiaocheng; Zare, Richard N

2017-12-27

Deep reinforcement learning was employed to optimize chemical reactions. Our model iteratively records the results of a chemical reaction and chooses new experimental conditions to improve the reaction outcome. This model outperformed a state-of-the-art blackbox optimization algorithm by using 71% fewer steps on both simulations and real reactions. Furthermore, we introduced an efficient exploration strategy by drawing the reaction conditions from certain probability distributions, which resulted in an improvement on regret from 0.062 to 0.039 compared with a deterministic policy. Combining the efficient exploration policy with accelerated microdroplet reactions, optimal reaction conditions were determined in 30 min for the four reactions considered, and a better understanding of the factors that control microdroplet reactions was reached. Moreover, our model showed a better performance after training on reactions with similar or even dissimilar underlying mechanisms, which demonstrates its learning ability.

Multi-component lightweight gearwheels with deep-drawn wheel body for automotive applications

NASA Astrophysics Data System (ADS)

Benkert, Tim; Hiller, Maria; Volk, Wolfram

2017-09-01

Multi-component gearwheels offer great lightweight opportunities for automotive applications. An assembly of a gear ring and a wheel body joined by press fit replaces the monolithic gearwheel. To save weight, the wheel body uses lightweight design. This lightweight design influences the assembled gearwheel’s mechanical properties like stiffness, weight and torque capacity. Further, the wheel body material influences the mentioned properties as well. In this paper, the effects of the lightweight wheel body manufactured by deep-drawing on the mechanical properties of the assembled gearwheel are investigated. Three different wheel body designs are examined regarding their stiffness and weight compared to a reference gearwheel. Using the best design, the influence of five materials with increasing yield strength on the maximum torque the gearwheel can transmit is studied. All research is done virtually using Abaqus 6.12-3.

The 'French exception': the right to continuous deep sedation at the end of life.

PubMed

Horn, Ruth

2018-03-01

In 2016, a law came into force in France granting terminally ill patients the right to continuous deep sedation (CDS) until death. This right was proposed as an alternative to euthanasia and presented as the 'French response' to problems at the end of life. The law draws a distinction between CDS and euthanasia and other forms of sympton control at the end of life. France is the first country in the world to legislate on CDS . This short report describes the particular context and underlying social values that led to this piece of legislation, and explores its meaning in the wider French context. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Light sleep versus slow wave sleep in memory consolidation: a question of global versus local processes?

PubMed

Genzel, Lisa; Kroes, Marijn C W; Dresler, Martin; Battaglia, Francesco P

2014-01-01

Sleep is strongly involved in memory consolidation, but its role remains unclear. 'Sleep replay', the active potentiation of relevant synaptic connections via reactivation of patterns of network activity that occurred during previous experience, has received considerable attention. Alternatively, sleep has been suggested to regulate synaptic weights homeostatically and nonspecifically, thereby improving the signal:noise ratio of memory traces. Here, we reconcile these theories by highlighting the distinction between light and deep nonrapid eye movement (NREM) sleep. Specifically, we draw on recent studies to suggest a link between light NREM and active potentiation, and between deep NREM and homeostatic regulation. This framework could serve as a key for interpreting the physiology of sleep stages and reconciling inconsistencies in terminology in this field. Copyright © 2013 Elsevier Ltd. All rights reserved.

Strength and Formability Improvement of Al-Cu-Mn Aluminum Alloy Complex Parts by Thermomechanical Treatment with Sheet Hydroforming

NASA Astrophysics Data System (ADS)

Chen, Yi-Zhe; Liu, Wei; Yuan, Shi-Jian

2015-05-01

Normally, the strength and formability of aluminum alloys can be increased largely by severe plastic deformation and heat treatment. However, many plastic deformation processes are more suitable for making raw material, not for formed parts. In this article, an experimental study of the thermomechanical treatment by using the sheet hydroforming process was developed to improve both mechanical strength and formability for aluminum alloys in forming complex parts. The limiting drawing ratio, thickness, and strain distribution of complex parts formed by sheet hydroforming were investigated to study the formability and sheet-deformation behavior. Based on the optimal formed parts, the tensile strength, microhardness, grain structure, and strengthening precipitates were analyzed to identify the strengthening effect of thermomechanical treatment. The results show that in the solution state, the limiting drawing ratio of cylindrical parts could be increased for 10.9% compared with traditional deep drawing process. The peak values of tensile stress and microhardness of formed parts are 18.0% and 12.5% higher than that in T6 state. This investigation shows that the thermomechanical treatment by sheet hydroforming is a potential method for the products manufacturing of aluminum alloy with high strength and good formability.

Leadership styles, emotion regulation, and burnout.

PubMed

Arnold, Kara A; Connelly, Catherine E; Walsh, Megan M; Martin Ginis, Kathleen A

2015-10-01

This study investigated the potential impact of leadership style on leaders' emotional regulation strategies and burnout. Drawing on the full-range model of leadership and Conservation of Resources (COR) theory, we tested whether transformational, contingent reward, management by exception-active and -passive, or laissez-faire leadership exert direct effects on leaders' reported use of surface acting, deep acting, and genuine emotion. In turn, we hypothesized and tested the indirect effect of leadership on burnout through surface acting. Three waves of data from 205 leaders were analyzed using OLS regression. Transformational leadership predicted deep acting and genuine emotion. Contingent reward predicted both surface and deep acting. Management by exception-active and -passive predicted surface acting, and laissez faire predicted genuine emotion. The indirect effects of management by exception-active and -passive on burnout through surface acting were not significant. Indirect effects of transformational leadership and laissez-faire on burnout through genuine emotion, however, were significant. This study provides empirical evidence for the hypothesized relationships between leadership style, emotion regulation, and burnout, and provides the basis for future research and theory building on this topic. (c) 2015 APA, all rights reserved).

Range Measurement as Practiced in the Deep Space Network

NASA Technical Reports Server (NTRS)

Berner, Jeff B.; Bryant, Scott H.; Kinman, Peter W.

2007-01-01

Range measurements are used to improve the trajectory models of spacecraft tracked by the Deep Space Network. The unique challenge of deep-space ranging is that the two-way delay is long, typically many minutes, and the signal-to-noise ratio is small. Accurate measurements are made under these circumstances by means of long correlations that incorporate Doppler rate-aiding. This processing is done with commercial digital signal processors, providing a flexibility in signal design that can accommodate both the traditional sequential ranging signal and pseudonoise range codes. Accurate range determination requires the calibration of the delay within the tracking station. Measurements with a standard deviation of 1 m have been made.

Design Principles for Nickel/Hydrogen Cells and Batteries

NASA Technical Reports Server (NTRS)

Thaller, Lawrence H.; Manzo, Michelle A.; Gonzalez-Sanabria, Olga D.

1987-01-01

Individual-pressure-vessel (IPV) nickel/hydrogen cells and bipolar batteries developed for use as energy-storage subsystems for satelite applications. Design principles applied draw upon extensive background in separator technology, alkaline-fuel-cell technology and several alkaline-cell technology areas. Principals are rather straightforward applications of capillary-force formalisms, coupled with slowly developing data base resulting from careful post-test analyses. Based on preconceived assumptions relative to how devices work and how to be designed so they display longer cycle lives at deep discharge.

Metropolitan Washington Area Water Supply Study. Appendix I. Outlying Service Areas.

DTIC Science & Technology

1983-09-01

wells listed in Table 1-21. All are deep well turbine pump systems which draw their water supply from the Magothy Aquifer (200-300 feet). The water...When the sixth well is placed on line, the Department will have the ability to produce a maximum of 4.0 mpply from the Magothy Aquifer (200-300 feet...1-42 MAL. FICUR! 1-12 ORC91IZATIONAL STRUCTURE OF MAJOR PUBLIC WATER SUPPLY SYSTEMS CHARLES COUMITY Surface GroundwaterWae ataWater Magothy Ratanso

Yoga Therapy: Building a Holding Environment for Somatic and Psyche Change.

PubMed

McClure, Bud

2015-01-01

Drawing on ideas from D.W. Winnicott and the work of Quaker theologian Parker Palmer, this article discusses the concept of a holding environment, its refined understanding in the literature over the years, and how it can be optimally used in yoga therapy. The evidence shows that effectively establishing a holding environment can facilitate both somatic and deep structural change in a client, facilitating healing from primal wounding as well as the potential reconnection to the true self.

Disentangling weak coherence and executive dysfunction: planning drawing in autism and attention-deficit/hyperactivity disorder.

PubMed Central

Booth, Rhonda; Charlton, Rebecca; Hughes, Claire; Happé, Francesca

2003-01-01

A tendency to focus on details at the expense of configural information, 'weak coherence', has been proposed as a cognitive style in autism. In the present study we tested whether weak coherence might be the result of executive dysfunction, by testing clinical groups known to show deficits on tests of executive control. Boys with autism spectrum disorders (ASD) were compared with age- and intelligence quotient (IQ)-matched boys with attention-deficit/hyperactivity disorder (ADHD), and typically developing (TD) boys, on a drawing task requiring planning for the inclusion of a new element. Weak coherence was measured through analysis of drawing style. In line with the predictions made, the ASD group was more detail-focused in their drawings than were either ADHD or TD boys. The ASD and ADHD groups both showed planning impairments, which were more severe in the former group. Poor planning did not, however, predict detail-focus, and scores on the two aspects of the task were unrelated in the clinical groups. These findings indicate that weak coherence may indeed be a cognitive style specific to autism and unrelated to cognitive deficits in frontal functions. PMID:12639335

A Robust Deep Model for Improved Classification of AD/MCI Patients

PubMed Central

Li, Feng; Tran, Loc; Thung, Kim-Han; Ji, Shuiwang; Shen, Dinggang; Li, Jiang

2015-01-01

Accurate classification of Alzheimer’s Disease (AD) and its prodromal stage, Mild Cognitive Impairment (MCI), plays a critical role in possibly preventing progression of memory impairment and improving quality of life for AD patients. Among many research tasks, it is of particular interest to identify noninvasive imaging biomarkers for AD diagnosis. In this paper, we present a robust deep learning system to identify different progression stages of AD patients based on MRI and PET scans. We utilized the dropout technique to improve classical deep learning by preventing its weight co-adaptation, which is a typical cause of over-fitting in deep learning. In addition, we incorporated stability selection, an adaptive learning factor, and a multi-task learning strategy into the deep learning framework. We applied the proposed method to the ADNI data set and conducted experiments for AD and MCI conversion diagnosis. Experimental results showed that the dropout technique is very effective in AD diagnosis, improving the classification accuracies by 5.9% on average as compared to the classical deep learning methods. PMID:25955998

Trace fossil analysis of lacustrine facies and basins

USGS Publications Warehouse

Buatois, L.A.; Mangano, M.G.

1998-01-01

Two ichnofacies are typical of lacustrine depositional systems. The Scoyenia ichnofacies characterizes transitional terrestrial/nonmarine aquatic substrates, periodically inundated or desiccated, and therefore is commonly present in lake margin facies. The Mermia ichnofacies is associated with well oxygenated, permanent subaqueous, fine-grained substrates of hydrologically open, perennial lakes. Bathymetric zonations within the Mermia ichnofacies are complicated by the wide variability of lacustrine systems. Detected proximal-distal trends are useful within particular lake basins, but commonly difficult to extrapolate to other lakes. Other potential ichnofacies include the typically marine Skolithos ichnofacies for high-energy zones of lakes and substrate-controlled, still unnamed ichnofacies, associated to lake margin deposits. Trace fossils are useful for sedimentologic analysis of event beds. Lacustrine turbidites are characterized by low-diversity suites, reflecting colonization by opportunistic organisms after the turbidite event. Underflow current beds record animal activity contemporaneous with nearly continuous sedimentation. Ichnologic studies may also help to distinguish between marine and lacustrine turbidites. Deep-marine turbidites host the Nereites ichnofacies that consists of high diversity of ornate grazing traces and graphoglyptids, recording highly specialized feeding strategies developed to solve the problem of the scarcity of food in the deep sea. Deep lacustrine environments contain the Mermia ichnofacies, which is dominated by unspecialized grazing and feeding traces probably related to the abundance and accessibility of food in lacustrine systems. The lower diversity of lacustrine ichnofaunas in comparison with deep-sea assemblages more likely reflects lower species diversity as a consequence of less stable conditions. Increase of depth and extent of bioturbation through geologic time produced a clear signature in the ichnofabric record of lacustrine facies. Paleozoic lacustrine ichnofaunas are typically dominated by surface trails with little associated bioturbation. During the Mesozoic, bioturbation depth was higher in lake margin facies than in fully lacustrine deposits. While significant degrees of bioturbation were attained in lake margin facies during the Triassic, major biogenic disruption of primary bedding in subaqueous lacustrine deposits did not occur until the Cretaceous.

Employer Engagement in Education: Literature Review

ERIC Educational Resources Information Center

Mann, Anthony; Dawkins, James

2014-01-01

The subject of this paper is employer engagement in education. In this, the authors consider the range of different ways that employers can support the learning and progression of young people in British schools. The paper draws on a wide range of source material to ask: What are the typical benefits of different types of employer engagement? Do…

Understanding Insight in the Context of Q

ERIC Educational Resources Information Center

Coghlan, David

2012-01-01

In Revans' learning formula, L = P + Q, Q represents "questioning insight", by which Revans means that insight comes out of the process of questioning programmed knowledge (P) in the light of experience. We typically focus on the content of an insight rather than on the act of insight. Drawing primarily on the work of Bernard Lonergan this paper…

A Catskill Flora and Economic Botany, I: Pteridophyta. The Ferns and Fern Allies. Bulletin No. 438, New York State Museum.

ERIC Educational Resources Information Center

Brooks, Karl L.

The information contained within this guide about flora of the ferns and fern allies of the Catskill Mountains of New York State covers medical and food uses of the plants, as well as the more typical floristic data of keys, drawings, and plant descriptions. (CS)

Awareness of Number In Children With Severe And Profound Learning Difficulties: Three Exploratory Case Studies

ERIC Educational Resources Information Center

Porter, Jill

2005-01-01

This paper reports on exploratory work investigating how children with severe and profound learning difficulties register an awareness of small quantities and how they might use this information to inform their understanding. It draws on studies of typically developing children and investigates their application to pupils whose response to…

Structures and Technology Encouraging Discussion in Human Sexuality Courses: Strategies to Engage a Range of Students

ERIC Educational Resources Information Center

Angera, Jeffrey J.; Latty, Christopher R.

2015-01-01

Human sexuality courses are common across many college/university campuses. The methods of instruction typically encourage discussion to increase knowledge and critical thinking about self, relationships, and professional pathways. However, often the pedagogical practices do not include methods to draw out students with a range of personalities,…

From Individualism to Co-Construction and Back Again: Rethinking Research Methodology for Children with Profound and Multiple Learning Disabilities

ERIC Educational Resources Information Center

Simmons, Ben; Watson, Debbie

2015-01-01

Children with profound and multiple learning disabilities (PMLD) are said to experience severe congenital impairments to consciousness and cognition stemming from neurological damage. Such children are understood as operating at the pre-verbal stages of development, and research in the field typically draws conceptual resources from psychology to…

The Role of Morbidity for Proxy-Reported Well-Being in the Last Year of Life

ERIC Educational Resources Information Center

Gerlach, Katharina; Ram, Nilam; Infurna, Frank J.; Vogel, Nina; Wagner, Gert G.; Gerstorf, Denis

2017-01-01

Late-life well-being often shows steep deteriorations, but the contributing factors are not well understood, in part because data about people's final year of life are scarce. Here, we draw from and test theoretical perspectives that health-related vulnerabilities undermine the experience and skills older adults typically use to maintain…

Girls Discuss Choice of an All-Girl Middle School: Narrative Analysis of an Early Adolescent Identity Project

ERIC Educational Resources Information Center

Baron, Emilia; Bell, Nancy J.; Corson, Kimberly; Kostina-Ritchey, Erin; Frederick, Helyne

2012-01-01

The narrative creation of identity by young adolescents has so far been addressed mainly from an identity-in-interaction perspective, focusing attention on the multiplicity and variability of identity negotiation as adolescents interact with others, typically with peers. In contrast, a sociocultural/dialogical perspective draws attention to the…

Seeking a "Critical Mass": Middle-Class Parents' Collective Engagement in City Public Schooling

ERIC Educational Resources Information Center

Posey-Maddox, Linn; Kimelberg, Shelley McDonough; Cucchiara, Maia

2016-01-01

A growing body of literature has begun to explore the individual identities, motivations, and school choices of middle-class, typically white, parents who choose to reside in socioeconomically and racially mixed central city neighborhoods. Drawing on qualitative research in three US cities, we argue that a focus on middle-class parents' collective…

2011 Hans O. Mauksch Address: Teaching for Whom?

ERIC Educational Resources Information Center

Zipp, John F.

2012-01-01

In this article, I ask for whom is our teaching developed? Although we typically think that it is developed for our students, there appears to be a considerable gap between how our curriculum, especially Introductory Sociology is organized, and what we know about current college students. Drawing on data on enrollment in sociology and overall in…

Flying, Feathery and Beaked Objects: Children's Mental Models about Birds

ERIC Educational Resources Information Center

Ahi, Berat

2016-01-01

Purpose of this research is to state preschool students' mental model about birds by analyzing their drawing. This is a hermeneutical phenomenology research that is based on social constructivist philosophy. Typical case sampling method has used in order to form working group of this research. Working group consisting of 325 children who are in…

Centralising Space: The Physical Education and Physical Activity Experiences of South Asian, Muslim Girls

ERIC Educational Resources Information Center

Stride, Annette

2016-01-01

This paper explores the physical education (PE) and physical activity experiences of a group of South Asian, Muslim girls, a group typically marginalised in PE and physical activity research. The study responds to ongoing calls for research to explore across different spaces in young people's lives. Specifically, I draw on a…

Master Study: Ceramics

ERIC Educational Resources Information Center

Clark, Kelly

2004-01-01

In painting and drawing classes, it is typical to ask students to work directly from a master. It is one way to study composition techniques, and to become familiar with classical style firsthand. In museums, easels are set up as artists work, not in an attempt to copy or plagiarize, but in an attempt to be part of history by participating in it.…

Enduring Consequences of Right-Wing Extremism: Klan Mobilization and Homicides in Southern Counties

ERIC Educational Resources Information Center

McVeigh, Rory; Cunningham, David

2012-01-01

Research on the consequences of social movements typically aims to identify determinants of success or to draw attention to ways that social movements are able to secure new benefits for constituents by gaining concessions from political authorities. Yet social movements, even those that are ultimately defeated, may have an enduring impact on the…

Kinuigmi Sugutchich (Things in the Home).

ERIC Educational Resources Information Center

Pulu, Tupou L.; And Others

This first level social studies text, designed for children in bilingual Inupiat-English programs in the Alaskan villages of Ambler, Kobuk, Kiana, Noorvik, Selawik, and Shungnak, names a number of objects typically found in the home. Each page of text is illustrated with a black-and-white drawing. The English equivalent is given at the back and is…

RDX/HMX Plant Design

DTIC Science & Technology

1981-05-01

coating process in Explosives Manufacturing Line 2. The end products of the initial design effort are process flow diagrams, piping and...instrumentation diagrams, motor control schedules, interlock logic diagrams, piping installation drawings, typical instrument Installation details, equipment...structures, equipment, utilities, and process piping extending 1.5 m (5 ft) beyond the building or area were not included in the scope of work. Nitrolysis

From Disconnection to Connection: "Race", Gender and the Politics of Therapy

ERIC Educational Resources Information Center

Chantler, Khatidja

2005-01-01

Person-centred therapy typically fails to address structural dimensions of inequality such as "race", gender and class. In this paper, I explore why this is, and what can be done about it ? at the levels of theory, practice and the organisation of services. Drawing on person-centred theory and practice, I discuss theoretical and…

Academic Staff Quality in Higher Education: An Empirical Analysis of Portuguese Public Administration Education

ERIC Educational Resources Information Center

Sarrico, Cláudia S.; Alves, André A.

2016-01-01

Higher education accreditation frameworks typically consider academic staff quality a key element. This article embarks on an empirical study of what academic staff quality means, how it is measured, and how different aspects of staff quality relate to each other. It draws on the relatively nascent Portuguese experience with study programme…

Case Study Analysis in the Classroom: Becoming a Reflective Teacher

ERIC Educational Resources Information Center

Campoy, Renee W.

2004-01-01

Stories of students in need, or of teachers who are struggling, draw readers into the process of solving classroom problems in a manner that traditional textbook formats are unable to match. Presented in an engaging and stimulating manner, this book provides beginning teachers a variety of typical classroom problems to analyze and solve. Solving…

I Do... Want to Save: Marriage and Retirement Savings in Young Households

ERIC Educational Resources Information Center

Knoll, Melissa A. Z.; Tamborini, Christopher R.; Whitman, Kevin

2012-01-01

Increased policy and academic attention has been placed on promoting retirement savings early in the life course. This study investigates the extent to which retirement savings behavior among young persons, a population for which retirement savings is important but typically low, differs by marital status. We draw national survey data on young…

How Americans are Getting News and Information in the 21st Century

DTIC Science & Technology

2009-02-01

third—34%—are getting no news on a typical day. 22 The survey noted the popularity of social networking sites , but did not draw a correlation between...supporters. 35 Whereas the Air Force has traditionally blocked any access to social networking sites , it now uses YouTube, Facebook, Twitter, and blogs

414. Delineator Unknown Date Unknown STATE OF CALIFORNIA; DEPARTMENT OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

414. Delineator Unknown Date Unknown STATE OF CALIFORNIA; DEPARTMENT OF PUBLIC WORKS; DIVISION OF SAN FRANCISCO BAY TOLL CROSSINGS; SAN FRANCISCO OAKLAND BAY BRIDGE RECONSTRUCTION; STEEL WORK - WEST BAY; TYPICAL SECTIONS; SHEET NO. 5; DRAWING NO. C-4028-5R - San Francisco Oakland Bay Bridge, Spanning San Francisco Bay, San Francisco, San Francisco County, CA

3-D movies using microprocessor-controlled optoelectronic spectacles

NASA Astrophysics Data System (ADS)

Jacobs, Ken; Karpf, Ron

2012-02-01

Despite rapid advances in technology, 3-D movies are impractical for general movie viewing. A new approach that opens all content for casual 3-D viewing is needed. 3Deeps--advanced microprocessor controlled optoelectronic spectacles--provides such a new approach to 3-D. 3Deeps works on a different principle than other methods for 3-D. 3-D movies typically use the asymmetry of dual images to produce stereopsis, necessitating costly dual-image content, complex formatting and transmission standards, and viewing via a corresponding selection device. In contrast, all 3Deeps requires to view movies in realistic depth is an illumination asymmetry--a controlled difference in optical density between the lenses. When a 2-D movie has been projected for viewing, 3Deeps converts every scene containing lateral motion into realistic 3-D. Put on 3Deeps spectacles for 3-D viewing, or remove them for viewing in 2-D. 3Deeps works for all analogue and digital 2-D content, by any mode of transmission, and for projection screens, digital or analogue monitors. An example using aerial photography is presented. A movie consisting of successive monoscopic aerial photographs appears in realistic 3-D when viewed through 3Deeps spectacles.

Arsenic migration to deep groundwater in Bangladesh influenced by adsorption and water demand.

PubMed

Radloff, K A; Zheng, Y; Michael, H A; Stute, M; Bostick, B C; Mihajlov, I; Bounds, M; Huq, M R; Choudhury, I; Rahman, M W; Schlosser, P; Ahmed, K M; van Geen, A

2011-10-01

Drinking shallow groundwater with naturally elevated concentrations of arsenic is causing widespread disease in many parts of South and Southeast Asia. In the Bengal Basin, growing reliance on deep (>150 m) groundwater has lowered exposure. In the most affected districts of Bangladesh, shallow groundwater concentrations average 100 to 370 μg L(-1), while deep groundwater is typically < 10 μg L(-1). Groundwater flow simulations have suggested that, even when deep pumping is restricted to domestic use, deep groundwater in some areas of the Bengal Basin is at risk of contamination. However, these simulations have neglected the impedance of As migration by adsorption to aquifer sediments. Here we quantify for the first time As sorption on deeper sediments in situ by replicating the intrusion of shallow groundwater through injection of 1,000 L of deep groundwater modified with 200 μg L(-1) of As into a deeper aquifer. Arsenic concentrations in the injected water were reduced by 70% due to adsorption within a single day. Basin-scale modelling indicates that while As adsorption extends the sustainable use of deep groundwater, some areas remain vulnerable; these areas can be prioritized for management and monitoring.

The Scope of Usage-Based Theory

PubMed Central

Ibbotson, Paul

2013-01-01

Usage-based approaches typically draw on a relatively small set of cognitive processes, such as categorization, analogy, and chunking to explain language structure and function. The goal of this paper is to first review the extent to which the “cognitive commitment” of usage-based theory has had success in explaining empirical findings across domains, including language acquisition, processing, and typology. We then look at the overall strengths and weaknesses of usage-based theory and highlight where there are significant debates. Finally, we draw special attention to a set of culturally generated structural patterns that seem to lie beyond the explanation of core usage-based cognitive processes. In this context we draw a distinction between cognition permitting language structure vs. cognition entailing language structure. As well as addressing the need for greater clarity on the mechanisms of generalizations and the fundamental units of grammar, we suggest that integrating culturally generated structures within existing cognitive models of use will generate tighter predictions about how language works. PMID:23658552

Young friendship in HFASD and typical development: friend versus non-friend comparisons.

PubMed

Bauminger-Zviely, Nirit; Agam-Ben-Artzi, Galit

2014-07-01

This study conducted comparative assessment of friendship in preschoolers with high-functioning autism spectrum disorder (HFASD, n = 29) versus preschoolers with typical development (n = 30), focusing on interactions with friends versus acquaintances. Groups were matched on SES, verbal/nonverbal MA, IQ, and CA. Multidimensional assessments included: mothers' and teachers' reports about friends' and friendship characteristics and observed individual and dyadic behaviors throughout interactions with friends versus non-friends during construction, drawing, and free-play situations. Findings revealed group differences in peer interaction favoring the typical development group, thus supporting the neuropsychological profile of HFASD. However, both groups' interactions with friends surpassed interactions with acquaintances on several key socio-communicative and intersubjective capabilities, thus suggesting that friendship may contribute to enhancement and practice of social interaction in HFASD.

Preserved reward outcome processing in ASD as revealed by event-related potentials.

PubMed

McPartland, James C; Crowley, Michael J; Perszyk, Danielle R; Mukerji, Cora E; Naples, Adam J; Wu, Jia; Mayes, Linda C

2012-05-31

Problems with reward system function have been posited as a primary difficulty in autism spectrum disorders. The current study examined an electrophysiological marker of feedback monitoring, the feedback-related negativity (FRN), during a monetary reward task. The study advanced prior understanding by focusing exclusively on a developmental sample, applying rigorous diagnostic characterization and introducing an experimental paradigm providing more subtly different feedback valence (reward versus non-reward instead of reward versus loss). Twenty-six children with autism spectrum disorder and 28 typically developing peers matched on age and full-scale IQ played a guessing game resulting in monetary gain ("win") or neutral outcome ("draw"). ERP components marking early visual processing (N1, P2) and feedback appraisal (FRN) were contrasted between groups in each condition, and their relationships to behavioral measures of social function and dysfunction, social anxiety, and autism symptomatology were explored. FRN was observed on draw trials relative to win trials. Consistent with prior research, children with ASD exhibited a FRN to suboptimal outcomes that was comparable to typical peers. ERP parameters were unrelated to behavioral measures. Results of the current study indicate typical patterns of feedback monitoring in the context of monetary reward in ASD. The study extends prior findings of normative feedback monitoring to a sample composed exclusively of children and demonstrates that, as in typical development, individuals with autism exhibit a FRN to suboptimal outcomes, irrespective of neutral or negative valence. Results do not support a pervasive problem with reward system function in ASD, instead suggesting any dysfunction lies in more specific domains, such as social perception, or in response to particular feedback-monitoring contexts, such as self-evaluation of one's errors.

Deep Crustal Structure beneath Large Igneous Provinces and the Petrologic Evolution of Flood Basalts

NASA Astrophysics Data System (ADS)

Richards, Mark; Ridley, Victoria

2010-05-01

We present a review of seismological constraints on deep crustal structures underlying large igneous provinces (LIPs), largely from wide-angle seismic refraction surveys. The main purpose of this review is to ascertain whether this seismic evidence is consistent with, or contrary to, petrological models for the genesis of flood basalt lavas. Where high-quality data are available beneath continental flood basalt (CFB) provinces (Emeishan, Columbia River, Deccan, Siberia), high-velocity structures (Vp ~6.9-7.5 km/sec) are typically found immediately overlying the Moho in layers of order ~5-15 km thick. Oceanic plateau (OP) LIPs exhibit similar layers, with a conspicuous layer of very high crustal velocity (Vp~7.7 km/sec) beneath the enormous Ontong-Java plateau. These structures are similar to inferred ultramafic underplating structures seen beneath active hotspots such as Hawaii, the Marqueses, and La Reunion. Petrogenetic models for flood basalt volcanism based on hot plume melting beneath mature lithosphere suggest that these deep seismic structures may consist in large part of cumulate bodies of olivine and clinopyroxene which result from ponding and deep-crustal fractionation of ultramafic primary melts. Such fractionation is necessary to produce basalts with typical MgO contents of ~6-8%, as observed for the vast bulk of observed flood basalts, from primary melts with MgO contents of order ~15-18% (or greater) such as result from hot, deep melting beneath the lithosphere. The volumes of cumulate bodies and ultramafic intrusions in the lowermost crust, often described in the literature as "underplating," are comparable to those of the overlying basaltic formations, also consistent with petrological models. Further definition of the deep seismic structure beneath such prominent LIPs as the Ontong-Java Plateau could place better constraints on flood basalt petrogenesis by determining the relative volumes of ultramafic bodies and basaltic lavas, thereby better constraining the overall process of LIP emplacement.

Deep crustal structure beneath large igneous provinces and the petrologic evolution of flood basalts

NASA Astrophysics Data System (ADS)

Ridley, Victoria A.; Richards, Mark A.

2010-09-01

We present a review of seismological constraints on deep crustal structures underlying large igneous provinces (LIPs), largely from wide-angle seismic refraction surveys. The main purpose of this review is to ascertain whether this seismic evidence is consistent with, or contrary to, petrological models for the genesis of flood basalt lavas. Where high-quality data are available beneath continental flood basalt (CFB) provinces (Emeishan, Columbia River, Deccan, Siberia), high-velocity structures (Vp ˜ 6.9-7.5 km/sec) are typically found immediately overlying the Moho in layers of order ˜5-15 km thick. Oceanic plateau (OP) LIPs exhibit similar layers, with a conspicuous layer of very high crustal velocity (Vp ˜ 7.7 km/sec) beneath the enormous Ontong-Java plateau. These structures are similar to inferred ultramafic underplating structures seen beneath active hot spots such as Hawaii, the Marquesas, and La Reunion. Petrogenetic models for flood basalt volcanism based on hot plume melting beneath mature lithosphere suggest that these deep seismic structures may consist in large part of cumulate bodies of olivine and clinopyroxene which result from ponding and deep-crustal fractionation of ultramafic primary melts. Such fractionation is necessary to produce basalts with typical MgO contents of ˜6-8%, as observed for the vast bulk of observed flood basalts, from primary melts with MgO contents of order ˜15-18% (or greater) such as result from hot, deep melting beneath the lithosphere. The volumes of cumulate bodies and ultramafic intrusions in the lowermost crust, often described in the literature as "underplating," are comparable to those of the overlying basaltic formations, also consistent with petrological models. Further definition of the deep seismic structure beneath such prominent LIPs as the Ontong-Java Plateau could place better constraints on flood basalt petrogenesis by determining the relative volumes of ultramafic bodies and basaltic lavas, thereby better constraining the overall process of LIP emplacement.

Deep Crustal Structure beneath Large Igneous Provinces and the Petrologic Evolution of Flood Basalts

NASA Astrophysics Data System (ADS)

Richards, M. A.; Ridley, V. A.

2010-12-01

We present a review of seismological constraints on deep crustal structures underlying large igneous provinces (LIPs), largely from wide-angle seismic refraction surveys. The main purpose of this review is to ascertain whether this seismic evidence is consistent with, or contrary to, petrological models for the genesis of flood basalt lavas. Where high-quality data are available beneath continental flood basalt (CFB) provinces (Emeishan, Columbia River, Deccan, Siberia), high-velocity structures (Vp ~6.9-7.5 km/sec) are typically found immediately overlying the Moho in layers of order ~5-15 km thick. Oceanic plateau (OP) LIPs exhibit similar layers, with a conspicuous layer of very high crustal velocity (Vp~7.7 km/sec) beneath the enormous Ontong-Java plateau. These structures are similar to inferred ultramafic underplating structures seen beneath active hotspots such as Hawaii, the Marquesas, and La Reunion. Petrogenetic models for flood basalt volcanism based on hot plume melting beneath mature lithosphere suggest that these deep seismic structures may consist in large part of cumulate bodies of olivine and clinopyroxene which result from ponding and deep-crustal fractionation of ultramafic primary melts. Such fractionation is necessary to produce basalts with typical MgO contents of ~6-8%, as observed for the vast bulk of observed flood basalts, from primary melts with MgO contents of order ~15-18% (or greater) such as result from hot, deep melting beneath the lithosphere. The volumes of cumulate bodies and ultramafic intrusions in the lowermost crust, often described in the literature as “underplating,” are comparable to those of the overlying basaltic formations, also consistent with petrological models. Further definition of the deep seismic structure beneath such prominent LIPs as the Ontong-Java Plateau could place better constraints on flood basalt petrogenesis by determining the relative volumes of ultramafic bodies and basaltic lavas, thereby better constraining the overall process of LIP emplacement.

Comparison of deep and superficial abdominal muscle activity between experienced Pilates and resistance exercise instructors and controls during stabilization exercise.

PubMed

Moon, Ji-Hyun; Hong, Sang-Min; Kim, Chang-Won; Shin, Yun-A

2015-06-01

Pilates and resistance exercises are used for lumbar stabilization training. However, it is unclear which exercise is more effective for lumbar stabilization. In our study, we aimed to compare surface muscle activity and deep muscle thickness during relaxation and spinal stabilization exercise in experienced Pilates and resistance exercise instructors. This study is a retrospective case control study set in the Exercise Prescription Laboratory and Sports Medicine Center. The participants included Pilates instructors (mean years of experience, 3.20±1.76; n=10), resistance exercise instructors (mean years of experience, 2.53±0.63; n=10), and controls (n=10). The participants performed 4 different stabilization exercises: abdominal drawing-in maneuver, bridging, roll-up, and one-leg raise. During the stabilization exercises, surface muscle activity was measured with electromyography, whereas deep muscle thickness was measured by ultrasound imaging. During the 4 stabilization exercises, the thickness of the transverse abdominis (TrA) was significantly greater in the Pilates-trained group than the other 2 other groups. The internal oblique (IO) thickness was significantly greater in the Pilates- and resistance-trained group than the control group, during the 4 exercises. However, the surface muscle activities were similar between the groups. Both Pilates and resistance exercise instructors had greater activation of deep muscles, such as the TrA and IO, than the control subjects. Pilates and resistance exercise are both effective for increasing abdominal deep muscle thickness.

Comparison of deep and superficial abdominal muscle activity between experienced Pilates and resistance exercise instructors and controls during stabilization exercise

PubMed Central

Moon, Ji-Hyun; Hong, Sang-Min; Kim, Chang-Won; Shin, Yun-A

2015-01-01

Pilates and resistance exercises are used for lumbar stabilization training. However, it is unclear which exercise is more effective for lumbar stabilization. In our study, we aimed to compare surface muscle activity and deep muscle thickness during relaxation and spinal stabilization exercise in experienced Pilates and resistance exercise instructors. This study is a retrospective case control study set in the Exercise Prescription Laboratory and Sports Medicine Center. The participants included Pilates instructors (mean years of experience, 3.20±1.76; n=10), resistance exercise instructors (mean years of experience, 2.53±0.63; n=10), and controls (n=10). The participants performed 4 different stabilization exercises: abdominal drawing-in maneuver, bridging, roll-up, and one-leg raise. During the stabilization exercises, surface muscle activity was measured with electromyography, whereas deep muscle thickness was measured by ultrasound imaging. During the 4 stabilization exercises, the thickness of the transverse abdominis (TrA) was significantly greater in the Pilates-trained group than the other 2 other groups. The internal oblique (IO) thickness was significantly greater in the Pilates- and resistance-trained group than the control group, during the 4 exercises. However, the surface muscle activities were similar between the groups. Both Pilates and resistance exercise instructors had greater activation of deep muscles, such as the TrA and IO, than the control subjects. Pilates and resistance exercise are both effective for increasing abdominal deep muscle thickness. PMID:26171383

A record of deep-ocean dissolved O2 from the oxidation state of iron in submarine basalts.

PubMed

Stolper, Daniel A; Keller, C Brenhin

2018-01-18

The oxygenation of the deep ocean in the geological past has been associated with a rise in the partial pressure of atmospheric molecular oxygen (O 2 ) to near-present levels and the emergence of modern marine biogeochemical cycles. It has also been linked to the origination and diversification of early animals. It is generally thought that the deep ocean was largely anoxic from about 2,500 to 800 million years ago, with estimates of the occurrence of deep-ocean oxygenation and the linked increase in the partial pressure of atmospheric oxygen to levels sufficient for this oxygenation ranging from about 800 to 400 million years ago. Deep-ocean dissolved oxygen concentrations over this interval are typically estimated using geochemical signatures preserved in ancient continental shelf or slope sediments, which only indirectly reflect the geochemical state of the deep ocean. Here we present a record that more directly reflects deep-ocean oxygen concentrations, based on the ratio of Fe 3+ to total Fe in hydrothermally altered basalts formed in ocean basins. Our data allow for quantitative estimates of deep-ocean dissolved oxygen concentrations from 3.5 billion years ago to 14 million years ago and suggest that deep-ocean oxygenation occurred in the Phanerozoic (541 million years ago to the present) and potentially not until the late Palaeozoic (less than 420 million years ago).

A record of deep-ocean dissolved O2 from the oxidation state of iron in submarine basalts

NASA Astrophysics Data System (ADS)

Stolper, Daniel A.; Keller, C. Brenhin

2018-01-01

The oxygenation of the deep ocean in the geological past has been associated with a rise in the partial pressure of atmospheric molecular oxygen (O2) to near-present levels and the emergence of modern marine biogeochemical cycles. It has also been linked to the origination and diversification of early animals. It is generally thought that the deep ocean was largely anoxic from about 2,500 to 800 million years ago, with estimates of the occurrence of deep-ocean oxygenation and the linked increase in the partial pressure of atmospheric oxygen to levels sufficient for this oxygenation ranging from about 800 to 400 million years ago. Deep-ocean dissolved oxygen concentrations over this interval are typically estimated using geochemical signatures preserved in ancient continental shelf or slope sediments, which only indirectly reflect the geochemical state of the deep ocean. Here we present a record that more directly reflects deep-ocean oxygen concentrations, based on the ratio of Fe3+ to total Fe in hydrothermally altered basalts formed in ocean basins. Our data allow for quantitative estimates of deep-ocean dissolved oxygen concentrations from 3.5 billion years ago to 14 million years ago and suggest that deep-ocean oxygenation occurred in the Phanerozoic (541 million years ago to the present) and potentially not until the late Palaeozoic (less than 420 million years ago).

Unique deep-water ecosystems off the southeastern United States

USGS Publications Warehouse

Ross, Steve W.

2007-01-01

If nothing else, research in deep-sea environments teaches us how little we know about such important and productive habitats. The relatively recent discovery of hydrothermal-vent and cold-seep ecosystems illustrates this paucity of knowledge, and the subsequent explosion of research on these systems is a good example of the impact such concentrated efforts can have on marine sciences (see the March 2007 special issue of Oceanography on InterRidge, and Levin et al., 2007). The recent surge of interest in deep-sea corals is another example of how focused research on a particular subject can result in new perspectives on continental slope biotopes. Although deep-sea corals have been known for over 200 years, they were viewed as somewhat of a novelty, and research on them was sporadic, typically geologic, and usually only documented their occurrences (e.g., Stetson et al., 1962; Neumann et al., 1977; Paull et al., 2000).

A Study Of Undergraduate Students' Alternative Conceptions Of Earth's Interior Using Drawing Tasks

NASA Astrophysics Data System (ADS)

McAllister, Meredith L.

2014-12-01

Learning fundamental geoscience topics such as plate tectonics, earthquakes, and volcanoes requires students to develop a deep understanding of the conceptual models geologists use when describing the structure and dynamics of Earth's interior. Despite the importance of these mental models underlying much of the undergraduate geoscience curriculum, surprisingly little research related to this complex idea exists in the discipline-based science education research literature. To better understand non-science-majoring undergraduates' conceptual models of Earth's interior, student-generated drawings and interviews were used to probe student understanding of the Earth. Ninety-two semi-structured interviews were conducted with non-science-major college students at the beginning of an entry-level geology course at a large Midwestern university. Students were asked to draw a picture of Earth's interior and provide think-aloud explanations of their drawings. The results reveal that students hold a wide range of alternative conceptions about Earth, with only a small fraction having scientifically accurate ideas. Students' understandings ranged from conceptualizing Earth's interior as consisting of horizontal layers of rock and dirt, to more sophisticated views with Earth's interior being composed of concentric layers with unique physical and chemical characteristics. Processes occurring within Earth, such as "convection," were rarely mentioned or explained. These results provide a first-steps basis from which to further explore college students' thinking and contribute to the growing body of knowledge on earth science teaching and geoscience education research.

The Reconceptualisation of Outdoor Education in the Primary School Classroom in Aotearoa New Zealand: How Might "We" Do It?

ERIC Educational Resources Information Center

Cosgriff, Marg

2016-01-01

The powerful learning that occurs outdoors has been well documented in this journal, as has an array of barriers teachers typically face in providing outdoor learning experiences. This paper draws on findings from a collaborative, practice-based research project examining the reconceptualisation of outdoor education in two Year 4 classes in a…

Using Critical Race Theory to Analyze How Disney Constructs Diversity: A Construct for the Baccalaureate Human Behavior in the Social Environment Curriculum

ERIC Educational Resources Information Center

Cappiccie, Amy; Chadha, Janice; Lin, Muh Bi; Snyder, Frank

2012-01-01

Utilizing the basic tenets of critical race theory, the authors draw upon the expertise of multicultural scholars to raise consciousness and facilitate BSW classroom dialogue about microagressions perpetrated in Disney animations. Microaggressions pervade our media partly because they typically operate outside the threshold of the dominant…

Learning a Foreign Language as Leisure and Consumption: Enjoyment, Desire, and the Business of "Eikaiwa"

ERIC Educational Resources Information Center

Kubota, Ryuko

2011-01-01

Social inclusion typically refers to the integration of the disadvantaged into the mainstream society as a national agenda. However, social inclusion in a broader sense addresses aspirations to be included in a global imagined community as well as a local community of like-minded people. Drawing on a qualitative study of men and women learning…

Structure and Agency in Learning: A Critical Realist Theory of the Development of Capacity to Reflect on Academic Practice

ERIC Educational Resources Information Center

Kahn, Peter; Qualter, Anne; Young, Richard

2012-01-01

Theories of learning typically downplay the interplay between social structure and student agency. In this article, we adapt a causal hypothesis from realist social theory and draw on wider perspectives from critical realism to account for the development of capacity to engage in reflection on professional practice in academic roles. We thereby…

Grade Assignments and the Teacher Pipeline: A Low-Cost Lever to Improve Student Achievement?

ERIC Educational Resources Information Center

Blazar, David

2015-01-01

Research on teacher stability typically focuses on the extent to which teachers remain in the same school, district, or the teaching profession from one year to the next. I investigate another facet of stability--whether teachers remain in the grade they teach. Drawing on administrative data from a large district in California, I find that high…

158. ARAIII Reactor building (ARA608) Secondary cooling loop and piping ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

158. ARA-III Reactor building (ARA-608) Secondary cooling loop and piping plan. This drawing was selected as a typical example of piping arrangements within reactor building. Aerojet/general 880-area/GCRE-608-P-16. Date: February 1958. INeel index code no. 063-0608-50-013-102641. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

The problem of resonance in technology usage

NASA Technical Reports Server (NTRS)

Sayani, H. H.; Svoboda, C. P.

1981-01-01

Various information system tools and techniques are analyzed. A case study is presented which draws together the issues raised in three distinct cases. This case study shows a typical progression from the selection of an analysis methodology, to the adoption of an automated tool for specification and documentation, and the difficulty of fitting these into an existing life cycle development methodology.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rivkin, C.; Blake, C.; Burgess, R.

This report explains the Regulations, Codes, and Standards (RCS) requirements for hydrogen dispensing stations in the State of California. The reports shows the basic components of a hydrogen dispensing station in a simple schematic drawing; the permits and approvals that would typically be required for the construction and operation of a hydrogen dispensing station; and a basic permit that might be employed by an Authority Having Jurisdiction (AHJ).

The Fate and Impact of Internal Waves in Nearshore Ecosystems

NASA Astrophysics Data System (ADS)

Woodson, C. B.

2018-01-01

Internal waves are widespread features of global oceans that play critical roles in mixing and thermohaline circulation. Similarly to surface waves, internal waves can travel long distances, ultimately breaking along continental margins. These breaking waves can transport deep ocean water and associated constituents (nutrients, larvae, and acidic low-oxygen waters) onto the shelf and locally enhance turbulence and mixing, with important effects on nearshore ecosystems. We are only beginning to understand the role internal waves play in shaping nearshore ecosystems. Here, I review the physics of internal waves in shallow waters and identify two commonalities among internal waves in the nearshore: exposure to deep offshore waters and enhanced turbulence and mixing. I relate these phenomena to important ecosystem processes ranging from extreme events to fertilization success to draw general conclusions about the influence of internal waves on ecosystems and the effects of internal waves in a changing climate.

Volcano seismicity and ground deformation unveil the gravity-driven magma discharge dynamics of a volcanic eruption.

PubMed

Ripepe, Maurizio; Donne, Dario Delle; Genco, Riccardo; Maggio, Giuseppe; Pistolesi, Marco; Marchetti, Emanuele; Lacanna, Giorgio; Ulivieri, Giacomo; Poggi, Pasquale

2015-05-18

Effusive eruptions are explained as the mechanism by which volcanoes restore the equilibrium perturbed by magma rising in a chamber deep in the crust. Seismic, ground deformation and topographic measurements are compared with effusion rate during the 2007 Stromboli eruption, drawing an eruptive scenario that shifts our attention from the interior of the crust to the surface. The eruption is modelled as a gravity-driven drainage of magma stored in the volcanic edifice with a minor contribution of magma supplied at a steady rate from a deep reservoir. Here we show that the discharge rate can be predicted by the contraction of the volcano edifice and that the very-long-period seismicity migrates downwards, tracking the residual volume of magma in the shallow reservoir. Gravity-driven magma discharge dynamics explain the initially high discharge rates observed during eruptive crises and greatly influence our ability to predict the evolution of effusive eruptions.

Hope for health and health care.

PubMed

Stempsey, William E

2015-02-01

Virtually all activities of health care are motivated at some level by hope. Patients hope for a cure; for relief from pain; for a return home. Physicians hope to prevent illness in their patients; to make the correct diagnosis when illness presents itself; that their prescribed treatments will be effective. Researchers hope to learn more about the causes of illness; to discover new and more effective treatments; to understand how treatments work. Ultimately, all who work in health care hope to offer their patients hope. In this paper, I offer a brief analysis of hope, considering the definitions of Hobbes, Locke, Hume and Thomas Aquinas. I then differentiate shallow and deep hope and show how hope in health care can remain shallow. Next, I explore what a philosophy of deep hope in health care might look like, drawing important points from Ernst Bloch and Gabriel Marcel. Finally, I suggest some implications of this philosophy of hope for patients, physicians, and researchers.

Optimizing Chemical Reactions with Deep Reinforcement Learning

PubMed Central

2017-01-01

Deep reinforcement learning was employed to optimize chemical reactions. Our model iteratively records the results of a chemical reaction and chooses new experimental conditions to improve the reaction outcome. This model outperformed a state-of-the-art blackbox optimization algorithm by using 71% fewer steps on both simulations and real reactions. Furthermore, we introduced an efficient exploration strategy by drawing the reaction conditions from certain probability distributions, which resulted in an improvement on regret from 0.062 to 0.039 compared with a deterministic policy. Combining the efficient exploration policy with accelerated microdroplet reactions, optimal reaction conditions were determined in 30 min for the four reactions considered, and a better understanding of the factors that control microdroplet reactions was reached. Moreover, our model showed a better performance after training on reactions with similar or even dissimilar underlying mechanisms, which demonstrates its learning ability. PMID:29296675

The Fate and Impact of Internal Waves in Nearshore Ecosystems.

PubMed

Woodson, C B

2018-01-03

Internal waves are widespread features of global oceans that play critical roles in mixing and thermohaline circulation. Similarly to surface waves, internal waves can travel long distances, ultimately breaking along continental margins. These breaking waves can transport deep ocean water and associated constituents (nutrients, larvae, and acidic low-oxygen waters) onto the shelf and locally enhance turbulence and mixing, with important effects on nearshore ecosystems. We are only beginning to understand the role internal waves play in shaping nearshore ecosystems. Here, I review the physics of internal waves in shallow waters and identify two commonalities among internal waves in the nearshore: exposure to deep offshore waters and enhanced turbulence and mixing. I relate these phenomena to important ecosystem processes ranging from extreme events to fertilization success to draw general conclusions about the influence of internal waves on ecosystems and the effects of internal waves in a changing climate.

Impacts of WRF lightning assimilation on offline CMAQ simulations

EPA Science Inventory

Deep convective clouds vertically redistribute trace gases and aerosols and also provide a source for scavenging, aqueous phase chemistry, and wet deposition, making them important to air quality.? Regional air quality simulations are typically driven by meteorological models tha...

Extradural myelomeningocele reconstruction using local turnover fascial flaps and midline linear skin closure.

PubMed

Patel, Kamlesh B; Taghinia, Amir H; Proctor, Mark R; Warf, Benjamin C; Greene, Arin K

2012-11-01

Myelomeningocele is the most common neural tube defect. Repair typically involves deep closure with regional muscle flaps (e.g. latissimus dorsi, gluteus maximus) and skin closure with rotation, bipedicle, or rhomboid flaps. We describe the reconstruction of large myelomeningocele defects using (1) local fascial turnover flaps with or without paraspinous muscle flaps for deep coverage of the dural repair followed by (2) linear, midline skin closure. Copyright © 2012 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Stridor and dysphagia associated with subthalamic nucleus stimulation in Parkinson disease.

PubMed

Fagbami, Oluwakemi Y; Donato, Anthony A

2011-11-01

Refractory symptoms in Parkinson disease show good response to deep brain stimulation (DBS). This procedure improves United Parkinson's Disease Rating Scale scores and reduces dyskinesias, whereas speech and swallowing dysfunction typically do not improve and may even worsen. Rarely, DBS can cause idiosyncratic dystonias of muscle groups, including those of the neck and throat. The authors describe a patient experiencing stridor and dysphagia with confirmed pulmonary restriction and aspiration following subthalamic nucleus deep brain stimulator adjustment, with a resolution of symptoms and signs when the stimulator was switched off.

Physician-reported practices on continuous deep sedation until death: A descriptive and comparative study.

PubMed

Papavasiliou, Evangelia Evie; Chambaere, Kenneth; Deliens, Luc; Brearley, Sarah; Payne, Sheila; Rietjens, Judith; Vander Stichele, Robert; Van den Block, Lieve

2014-06-01

Research on continuous deep sedation until death has focused on estimating prevalence and describing clinical practice across care settings. However, evidence on sedation practices by physician specialty is scarce. To compare and contrast physician-reported practices on continuous deep sedation until death between general practitioners and medical specialists. A secondary analysis drawing upon data from a large-scale, population-based, retrospective survey among physicians in Flanders, Belgium in 2007. Symptom prevalence and characteristics of sedation (drugs used, artificial nutrition and hydration administered, intentions, and decision-making) were measured. Response rate was 58.4%. The frequency of continuous deep sedation until death among all deaths was 11.3% for general practitioners and 18.4% for medical specialists. General practitioners reported significantly higher rates of severity and mean intensity of pain, delirium, dyspnea, and nausea in the last 24 h of life for sedated patients and a higher number of severe symptoms than medical specialists. No differences were found between groups in the drugs used, except in propofol, reported only by medical specialists (in 15.8% of all cases). Artificial nutrition and hydration was withheld or withdrawn in 97.2% of general practitioner and 36.2% of medical specialist cases. Explicit life-shortening intentions were reported by both groups (for 3%-4% of all cases). Continuous deep sedation until death was initiated without consent or request of either the patient or the family in 27.9% (medical specialists) and 4.7% (general practitioners) of the cases reported. Considerable variation, often largely deviating from professional guidelines, was observed in physician-reported performance and decision-making, highlighting the importance of providing clearer guidance on the specific needs of the context in which continuous deep sedation until death is to be performed. © The Author(s) 2014.

The relationship between the deep-level structure in crust and brewing of strong earthquakes in Xingtai area

NASA Astrophysics Data System (ADS)

Xiao, Lan-Xi; Zhu, Yuan-Qing; Zhang, Shao-Quan; Liu, Xu; Guo, Yu

1999-11-01

In this paper, crust medium is treated as Maxwell medium, and crust model includes hard inclusion, soft inclusion, deep-level fault. The stress concentration and its evolution with time are obtained by using three-dimensional finite element method and differential method. The conclusions are draw as follows: (1) The average stress concentration and maximum shear stress concentration caused by non-heterogeneous of crust are very high in hard inclusion and around the deep fault. With the time passing by, the concentration of average stress in the model gradually trends to uniform. At the same time, the concentration of maximum shear stress in hard inclusion increases gradually. This character is favorable to transfer shear strain energy from soft inclusion to hard inclusion. (2) When the upper mantle beneath the inclusion upheave at a certain velocity of 1 cm/a, the changes of average stress concentration with time become complex, and the boundary of the hard and soft inclusion become unconspicuous, but the maximum shear stress concentration increases much more in the hard inclusion with time at a higher velocity. This feature make for transformation of energy from the soft inclusion to the hard inclusion. (3) The changes of average stress concentration and maximum shear stress concentration with time around the deep-level fault result in further accumulation of maximum shear stress concentration and finally cause the deep-level fault instable and accelerated creep along fault direction. (4) The changes of vertical displacement on the surface of the model, which is caused by the accelerated creep of the deep-level fault, is similar to that of the observation data before Xingtai strong earthquake.

A green ultrasonic-assisted liquid-liquid microextraction based on deep eutectic solvent for the HPLC-UV determination of ferulic, caffeic and cinnamic acid from olive, almond, sesame and cinnamon oil.

PubMed

Khezeli, Tahere; Daneshfar, Ali; Sahraei, Reza

2016-04-01

A simple, inexpensive and sensitive ultrasonic-assisted liquid-liquid microextraction method based on deep eutectic solvent (UALLME-DES) was used for the extraction of three phenolic acids (ferulic, caffeic and cinnamic) from vegetable oils. In a typical experiment, deep eutectic solvent as green extraction solvent was added to n-hexane (as a typical oil medium) containing target analytes. Subsequently, the extraction was accelerated by sonication. After the extraction, phase separation (DES rich phase/n-hexane phase) was performed by centrifugation. DES rich phase (lower phase) was withdrawn by a micro-syringe and submitted to isocratic reverse-phase HPLC with UV detection. Under optimum conditions obtained by response surface methodology (RSM) and desirability function (DF), the method has good linear calibration ranges (between 1.30 and 1000 µg L(-1)), coefficients of determination (r(2)>0.9949) and low limits of detection (between 0.39 and 0.63 µg L(-1)). This procedure was successfully applied to the determination of target analytes in olive, almond, sesame and cinnamon oil samples. The relative mean recoveries ranged from 94.7% to 104.6%. Copyright © 2015 Elsevier B.V. All rights reserved.

DeepVel: Deep learning for the estimation of horizontal velocities at the solar surface

NASA Astrophysics Data System (ADS)

Asensio Ramos, A.; Requerey, I. S.; Vitas, N.

2017-07-01

Many phenomena taking place in the solar photosphere are controlled by plasma motions. Although the line-of-sight component of the velocity can be estimated using the Doppler effect, we do not have direct spectroscopic access to the components that are perpendicular to the line of sight. These components are typically estimated using methods based on local correlation tracking. We have designed DeepVel, an end-to-end deep neural network that produces an estimation of the velocity at every single pixel, every time step, and at three different heights in the atmosphere from just two consecutive continuum images. We confront DeepVel with local correlation tracking, pointing out that they give very similar results in the time and spatially averaged cases. We use the network to study the evolution in height of the horizontal velocity field in fragmenting granules, supporting the buoyancy-braking mechanism for the formation of integranular lanes in these granules. We also show that DeepVel can capture very small vortices, so that we can potentially expand the scaling cascade of vortices to very small sizes and durations. The movie attached to Fig. 3 is available at http://www.aanda.org

Vocabulary comprehension and strategies in name construction among children using aided communication.

PubMed

Deliberato, Débora; Jennische, Margareta; Oxley, Judith; Nunes, Leila Regina d'Oliveira de Paula; Walter, Cátia Crivelenti de Figueiredo; Massaro, Munique; Almeida, Maria Amélia; Stadskleiv, Kristine; Basil, Carmen; Coronas, Marc; Smith, Martine; von Tetzchner, Stephen

2018-03-01

Vocabulary learning reflects the language experiences of the child, both in typical and atypical development, although the vocabulary development of children who use aided communication may differ from children who use natural speech. This study compared the performance of children using aided communication with that of peers using natural speech on two measures of vocabulary knowledge: comprehension of graphic symbols and labeling of common objects. There were 92 participants not considered intellectually disabled in the aided group. The reference group consisted of 60 participants without known disorders. The comprehension task consisted of 63 items presented individually in each participant's graphic system, together with four colored line drawings. Participants were required to indicate which drawing corresponded to the symbol. In the expressive labelling task, 20 common objects presented in drawings had to be named. Both groups indicated the correct drawing for most of the items in the comprehension tasks, with a small advantage for the reference group. The reference group named most objects quickly and accurately, demonstrating that the objects were common and easily named. The aided language group named the majority correctly and in addition used a variety of naming strategies; they required more time than the reference group. The results give insights into lexical processing in aided communication and may have implications for aided language intervention.

Deep fiber networks: new ready-to-deploy architectures yield technical and economic benefits

NASA Astrophysics Data System (ADS)

Sipes, Donald L., Jr.; Loveless, Robert

2001-07-01

The advent of digital technology in HFC networks has opened up a myriad of opportunities for MSOs. The introduction of these advanced services comes at a cost: namely, the need for increased capacity; and especially increased reusable bandwidth. In HFC networks all services are ostensibly broadcast: the prime difference between services being the footprint over which these services are broadcast. Channel lineups for broadcast video services typically cover the largest are. Advertising zones are typically second, usually on the order of a typical 20K home hub. For initial penetrations for high speed data services such as cable modems, a typical hub site will be divided into several sectors using a single 6 MHz channel. Telephony services are broadcast over the smallest area, typically a 6 MHz channel for each node. Naturally as penetration of these services increase, the broadcast area for each will also decrease.

Reducing the stair step effect of layer manufactured surfaces by ball burnishing

NASA Astrophysics Data System (ADS)

Hiegemann, Lars; Agarwal, Chiranshu; Weddeling, Christian; Tekkaya, A. Erman

2016-10-01

The layer technology enables fast and flexible additive manufacturing of forming tools. The disadvantages of this system is the formation of stair steps in the range of tool radii. Within this work a new method to smooth this stair steps by ball burnishing is introduced. This includes studies on the general feasibility of the process and the determination of the influence of the rolling parameters. The investigations are carried out experimentally and numerically. Ultimately, the gained knowledge is applied to finish a deep drawing tool which is manufactured by layer technology.

Environmental philosophy: from theory to practice.

PubMed

Sarkar, Sahotra

2014-03-01

Environmental philosophy is a hybrid discipline drawing extensively from epistemology, ethics, and philosophy of science and analyzing disciplines such as conservation biology, restoration ecology, sustainability studies, and political ecology. The book being discussed both provides an overview of environmental philosophy and develops an anthropocentric framework for it. That framework treats natural values as deep cultural values. Tradeoffs between natural values are analyzed using decision theory to the extent possible, leaving many interesting question for philosophical deliberation. This framework is supposed to be applicable in practical contexts. Copyright © 2013 Elsevier Ltd. All rights reserved.

Advances in the application of holography for NDE

NASA Astrophysics Data System (ADS)

Sciammarella, C. A.

1985-01-01

The basic methodology of holographic interferometry in nondestructive testing (NDT) applications are described. Applications to crack detection in ceramic materials, including a crack 50 microns deep in a turbine blade, are discussed in detail. The theoretical principles of holographic interferometry are explained, and a general description of a holographic interferometric recording system is given. A nondestructive interferometric technique for measuring the gradual erosion of calcareous stones exposed to acid rain is also presented. Detailed line drawings illustrating the hologram recording and interferometric fringe pattern analysis elements in an interferometric holographic NDT device are provided.

Effects of groundwater withdrawal on borehole flow and salinity measured in deep monitor wells in Hawai'i-implications for groundwater management

USGS Publications Warehouse

Rotzoll, Kolja

2010-01-01

Water-resource managers in Hawai`i rely heavily on salinity profiles from deep monitor wells to estimate the thickness of freshwater and the depth to the midpoint of the transition zone between freshwater and saltwater in freshwater-lens systems. The deep monitor wells are typically open boreholes below the water table and extend hundreds of feet below sea level. Because of possible borehole-flow effects, there is concern that salinity profiles measured in these wells may not accurately reflect the salinity distribution in the aquifer and consequently lead to misinterpretations that adversely affect water-resource management. Steplike changes in salinity or temperature with depth in measured profiles from nonpumped deep monitor wells may be indicative of water moving within the well, and such changes are evident to some extent in all available profiles. The maximum vertical step length, or displacement, in measured profiles ranges from 7 to 644 feet. Vertical steps longer than 70 feet exceed the typical thickness of massive lava flows; they therefore cannot be attributed entirely to geologic structure and may be indicative of borehole flow. The longest vertical steps occur in monitor wells located in southern O'ahu, coinciding with the most heavily developed part of the aquifer. Although regional groundwater withdrawals have caused a thinning of the freshwater lens over the past several decades, the measured midpoint of the transition zone in most deep monitor wells has shown only inconsequential depth displacement in direct response to short-term variations in withdrawals from nearby production wells. For profiles from some deep monitor wells, however, the depth of the measured top of the transition zone, indicated by a specific-conductance value of 1,000 microsiemens per centimeter, has risen several hundred feet in response to withdrawals from nearby production wells. For these deep monitor wells, monitoring the apparent top of the transition zone may not provide an accurate indication of water quality in the adjacent aquifer. Hence, the measured midpoint in boreholes is a better proxy for freshwater-lens thickness. Brackish water transported upward in a deep monitor well can exit the borehole in the upper, freshwater part of the aquifer and affect the water quality in nearby production wells. Piezometers installed at different depths will provide the best information on aquifer salinity because they are unaffected by borehole flow. Despite the effects of borehole flow, monitoring the midpoint in deep monitor wells is still useful to identify long-term trends in the movement of the transition zone.

Corporal diagnostic work and diagnostic spaces: clinicians' use of space and bodies during diagnosis.

PubMed

Gardner, John; Williams, Clare

2015-06-01

An emerging body of literature in sociology has demonstrated that diagnosis is a useful focal point for understanding the social dimensions of health and illness. This article contributes to this work by drawing attention to the relationship between diagnostic spaces and the way in which clinicians use their own bodies during the diagnostic process. As a case study, we draw upon fieldwork conducted with a multidisciplinary clinical team providing deep brain stimulation (DBS) to treat children with a movement disorder called dystonia. Interviews were conducted with team members and diagnostic examinations were observed. We illustrate that clinicians use communicative body work and verbal communication to transform a material terrain into diagnostic space, and we illustrate how this diagnostic space configures forms of embodied 'sensing-and-acting' within. We argue that a 'diagnosis' can be conceptualised as emerging from an interaction in which space, the clinician-body, and the patient-body (or body-part) mutually configure one another. By conceptualising diagnosis in this way, this article draws attention to the corporal bases of diagnostic power and counters Cartesian-like accounts of clinical work in which the patient-body is objectified by a disembodied medical discourse. © 2015 The Authors. Sociology of Health & Illness © 2015 Foundation for the Sociology of Health & Illness.

Pathogenesis of deep endometriosis.

PubMed

Gordts, Stephan; Koninckx, Philippe; Brosens, Ivo

2017-12-01

The pathophysiology of (deep) endometriosis is still unclear. As originally suggested by Cullen, change the definition "deeper than 5 mm" to "adenomyosis externa." With the discovery of the old European literature on uterine bleeding in 5%-10% of the neonates and histologic evidence that the bleeding represents decidual shedding, it is postulated/hypothesized that endometrial stem/progenitor cells, implanted in the pelvic cavity after birth, may be at the origin of adolescent and even the occasionally premenarcheal pelvic endometriosis. Endometriosis in the adolescent is characterized by angiogenic and hemorrhagic peritoneal and ovarian lesions. The development of deep endometriosis at a later age suggests that deep infiltrating endometriosis is a delayed stage of endometriosis. Another hypothesis is that the endometriotic cell has undergone genetic or epigenetic changes and those specific changes determine the development into deep endometriosis. This is compatible with the hereditary aspects, and with the clonality of deep and cystic ovarian endometriosis. It explains the predisposition and an eventual causal effect by dioxin or radiation. Specific genetic/epigenetic changes could explain the various expressions and thus typical, cystic, and deep endometriosis become three different diseases. Subtle lesions are not a disease until epi(genetic) changes occur. A classification should reflect that deep endometriosis is a specific disease. In conclusion the pathophysiology of deep endometriosis remains debated and the mechanisms of disease progression, as well as the role of genetics and epigenetics in the process, still needs to be unraveled. Copyright © 2017 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Microstructural asymmetry of the corticospinal tracts predicts right-left differences in circle drawing skill in right-handed adolescents.

PubMed

Angstmann, Steffen; Madsen, Kathrine Skak; Skimminge, Arnold; Jernigan, Terry L; Baaré, William F C; Siebner, Hartwig Roman

2016-12-01

Most humans show a strong preference to use their right hand, but strong preference for the right hand does not necessarily imply a strong right-left asymmetry in manual proficiency (i.e., dexterity). Here we tested the hypothesis that intra-individual asymmetry of manual proficiency would be reflected in microstructural differences between the right and left corticospinal tract (CST) in a cohort of 52 right-handed typically-developing adolescents (11-16 years). Participants were asked to fluently draw superimposed circles with their right dominant and left non-dominant hand. Temporal regularity of circle drawing movements was assessed for each hand using a digitizing tablet. Although all participants were right-handed, there was substantial inter-individual variation regarding the relative right-hand advantage for fluent circle drawing. All subjects underwent whole-brain diffusion tensor imaging at 3 Tesla. The right and left CST were defined as regions-of-interest and mean fractional anisotropy (FA) and diffusivity values were calculated for right and left CST. On average, mean FA values were higher in the left CST relative to right CST. The degree of right-left FA asymmetry showed a linear relationship with right-left asymmetry in fluent circle drawing after correction for age and gender. The higher the mean FA values were in the left dominant CST relative to the right non-dominant CST, the stronger was the relative right-hand advantage for regular circle drawing. These findings show that right-left differences in manual proficiency are highly variable in right-handed adolescents and that this variation is associated with a right-left microstructural asymmetry of the CST.

Active Cooling of Oil after Deep-frying.

PubMed

Totani, Nagao; Yasaki, Naoko; Doi, Rena; Hasegawa, Etsuko

2017-10-01

Oil used for deep-frying is often left to stand after cooking. A major concern is oxidation during standing that might be avoidable, especially in the case of oil used repeatedly for commercial deep-frying as this involves large volumes that are difficult to cool in a conventional fryer. This paper describes a method to minimize oil oxidation. French fries were deep-fried and the oil temperature decreased in a manner typical for a commercial deep-fryer. The concentration of polar compounds generated from thermally oxidized oil remarkably increased at temperature higher than 100°C but little oxidation occurred below 60°C. Heating the oil showed that the peroxide and polar compound content did not increase when the oil was actively cooled using a running water-cooled Graham-type condenser system to cool the oil from 180°C to room temperature within 30 min. When French fries were fried and the oil was then immediately cooled using the condenser, the polar compound content during cooling did not increase. Our results demonstrate that active cooling of heated oil is simple and quite effective for inhibiting oxidation.

Meiofauna hotspot in the Atacama Trench, eastern South Pacific Ocean

NASA Astrophysics Data System (ADS)

Danovaro, R.; Gambi, C.; Della Croce, N.

2002-05-01

Meiofaunal assemblages were investigated (in terms of abundance, biomass, individual size and community structure) at bathyal and hadal depths (from 1050 to 7800 m) in the Atacama Trench in the upwelling sector of the eastern South Pacific Ocean, in relation to the distribution and availability of potential food sources (phytopigments, biochemical compounds and bacterial biomass) in this highly productive region. Meiofaunal density and biomass in the Atacama Trench were one to two orders of magnitude higher than values reported in other "oligotrophic" hadal systems. The Atacama Trench presented very high concentrations of nutritionally rich organic matter at 7800-m depth and displayed characteristics typical of eutrophic systems. Surprisingly, despite a decrease in chlorophyll- a and organic matter concentrations of about 50% from bathyal to hadal depths, meiofaunal abundance in hadal sediments was 10-fold higher than at bathyal depths. As indicated by the higher protein to carbohydrate ratio observed in trench sediments, the extraordinarily high meiofaunal density reported in the Atacama Trench was more dependent upon organic matter quality than on its quantity. The trophic richness of the system was reflected by a shift of the size structure of the benthic organisms. In contrast with typical trends of deep-sea systems, the ratio of bacterial to meiofaunal biomass decreased with increasing depth and, in the Atacama Trench, meiofaunal biomass largely dominated total benthic biomass. Nematodes at 7800-m depth accounted for more than 80% of total density and about 50% of total meiofaunal biomass. In hadal sediments a clear meiofaunal dwarfism was observed: the individual body size of nematodes and other taxa was reduced by 30-40% compared to individuals collected at bathyal depths. The peculiarity of this trophic-rich system allows rejection of previous hypotheses, which explained deep-sea dwarfism by the extremely oligotrophic conditions typical of deep-sea regions.

The Feasibility and Benefits of In Situ Exploration of ‘Oumuamua-like Objects

NASA Astrophysics Data System (ADS)

Seligman, Darryl; Laughlin, Gregory

2018-05-01

A rapid accumulation of observations and interpretation has followed in the wake of 1I ‘Oumuamua’s passage through the inner solar system. We briefly outline the consequences that this first detection of an interstellar asteroid implies for the planet-forming process, and we assess the near-term prospects for detecting and observing (both remotely and in situ) future solar system visitors of this type. Drawing on detailed heat-transfer calculations that take both ‘Oumuamua’s unusual shape and its chaotic tumbling into account, we affirm that the lack of a detectable coma in deep images of the object very likely arises from the presence of a radiation-modified coating of high molecular weight material (rather than a refractory bulk composition). Assuming that ‘Oumuamua is a typical representative of a larger population with a kinematic distribution similar to Population I stars in the local galactic neighborhood, we calculate expected arrival rates, impact parameters, and velocities of similar objects and assess their prospects for detection using operational and forthcoming facilities. Using ‘Oumuamua as a proof of concept, we assess the prospects for missions that intercept interstellar objects using conventional chemical propulsion. Using a “launch on detection” paradigm, we estimate wait times of order of 10 years between favorable mission opportunities with the detection capabilities of the Large-scale Synoptic Survey Telescope, a figure that will be refined as the population of interstellar asteroids becomes observationally better constrained.

Students learning from patients: let's get real in medical education.

PubMed

Bleakley, Alan; Bligh, John

2008-03-01

Medical students must be prepared for working in inter-professional and multi-disciplinary clinical teams centred on a patient's care pathway. While there has been a good deal of rhetoric surrounding patient-centred medical education, there has been little attempt to conceptualise such a practice beyond the level of describing education of communication skills and empathy within a broad 'professionalism' framework. Paradoxically, while aiming to strengthen patient-student interactions, this approach tends to refocus on the role modelling of the physician, and opportunities for potentially deep collaborative working relationships between students and patients are missed. A radical overhaul of conventional doctor-led medical education may be necessary, that also challenges the orthodoxies of individualistic student-centred approaches, leading to an authentic patient-centred model that shifts the locus of learning from the relationship between doctor as educator and student to the relationship between patient and student, with expert doctor as resource. Drawing on contemporary poststructuralist theory of text and identity construction, and on innovative models of work-based learning, the potential quality of relationship between student and patient is articulated in terms of collaborative knowledge production, involving close reading with the patient as text, through dialogue. Here, a medical 'education' displaces traditional forms of medical 'training' that typically involve individual information reproduction. Students may, paradoxically, improve clinical acumen through consideration of silences, gaps, and contradictions in patients as texts, rather than treating communication as transparent. Such paradoxical effects have been systematically occluded or denied in traditional medical education.

Ambras Syndrome: First Reported Case in Bangladesh and its Oral Rehabilitation.

PubMed

Khan, M H; Ashrafuzzaman, S M; Taib, A N; Alam, M T; Khan, S H; Goldstein, S K; Rahman, R

2015-10-01

People with rare hypertrichosis syndromes became crowd-drawing money-making phenomena in many 19th century sideshow acts. These individuals have been referred to as dog-men, hair-men, and werewolves. In 1993, Baumister et al. described congenital hypertrichosis lanuginose or Ambras syndrome: a distinct form of congenital hypertrichosis characterized by excessive hair growth over the body and face associated with facial and occasional dental anomalies. Much is not known about this syndrome since fewer than 50 cases have been documented worldwide. In this case report, a nine year old girl presented with excessive hair growth throughout her body that was denser along her midline. Furthermore, her face displayed the typical dysmorphic features characteristic of Ambras syndrome: a round tip nose, thickened nasal cartilage, antiverted nares, prominent philtrum with deep groove, and a trapezoid mouth. Oral examination revealed normal oral mucosa with completely missing and unerupted decidious and permanent teeth. Panoramic radiographs confirmed unerupted deciduous teeth. Previous case reports have mentioned the presence of occasional dental anomalies such as retarded first and second dentition and absence of some teeth. However, this is the first reported case of Ambras syndrome presenting with complete anodontia. Prior cytogenetic studies performed on persons with Ambras syndrome have implicated a balanced pericentric inversion of chromosome 8. However, it is likely that dental anomalies are likely a result of a different genetic rearrangement. Further studies are needed to explore the cause of this rare phenotype of Ambras syndrome with complete unerupted dentition.

A resolution adaptive deep hierarchical (RADHicaL) learning scheme applied to nuclear segmentation of digital pathology images.

PubMed

Janowczyk, Andrew; Doyle, Scott; Gilmore, Hannah; Madabhushi, Anant

2018-01-01

Deep learning (DL) has recently been successfully applied to a number of image analysis problems. However, DL approaches tend to be inefficient for segmentation on large image data, such as high-resolution digital pathology slide images. For example, typical breast biopsy images scanned at 40× magnification contain billions of pixels, of which usually only a small percentage belong to the class of interest. For a typical naïve deep learning scheme, parsing through and interrogating all the image pixels would represent hundreds if not thousands of hours of compute time using high performance computing environments. In this paper, we present a resolution adaptive deep hierarchical (RADHicaL) learning scheme wherein DL networks at lower resolutions are leveraged to determine if higher levels of magnification, and thus computation, are necessary to provide precise results. We evaluate our approach on a nuclear segmentation task with a cohort of 141 ER+ breast cancer images and show we can reduce computation time on average by about 85%. Expert annotations of 12,000 nuclei across these 141 images were employed for quantitative evaluation of RADHicaL. A head-to-head comparison with a naïve DL approach, operating solely at the highest magnification, yielded the following performance metrics: .9407 vs .9854 Detection Rate, .8218 vs .8489 F -score, .8061 vs .8364 true positive rate and .8822 vs 0.8932 positive predictive value. Our performance indices compare favourably with state of the art nuclear segmentation approaches for digital pathology images.

Drawing the Answers: Sketching to Support Free and Probed Recall by Child Witnesses and Victims with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Mattison, Michelle; Dando, Coral J.; Ormerod, Thomas C.

2018-01-01

The success of witness interviews in the criminal justice system depends on the accuracy of information obtained, which is a function of both amount and quality of information. Attempts to enhance witness retrieval such as mental reinstatement of context have been designed with typically developed adults in mind. In this article, the relative…

Remarks of Assistant Attorney General, Civil Rights Division, before the Affirmative Action Association (Chicago, IL, September 20, 1984). September 20, 1984).

ERIC Educational Resources Information Center

Reynolds, Wm. Bradford

"Affirmative action" is the term typically used to refer to two contrasting values: the value of equal opportunity and the value of equal results. The Justice Department under the Reagan Administration, however, draws a clear distinction between the two, and is committed to the "original" meaning of affirmative action. That is,…

Identifying Cross-Disciplinary Interactions to Assess and Promote Functional Resilience in Flight Crews During Exploration Missions

NASA Technical Reports Server (NTRS)

Shelhamer, M.; Mindock, J.; Lumpkins, S.

2015-01-01

NASA supports research to mitigate risks to health and performance on extended missions. Typically these risks are investigated independently. In reality, physiological systems are tightly coupled, and related to psychological and inter-individual factors (team cohesion, conflict). We draw on ideas from network theory to assess these interactions and better design a research framework to address them.

Dialoguing, Cultural Capital, and Student Engagement: Toward a Hip Hop Pedagogy in the High School and University Classroom

ERIC Educational Resources Information Center

Rodriguez, Louie F.

2009-01-01

Hip hop culture is typically excluded from conventional educational spaces within the U.S. Drawing on the experiences of an educator who works with urban high school students and university level pre- and in-service educators, this article examines the role of hip hop culture for student engagement in two settings--an alternative high school…

Long Range Effect of The M7.8 April 2015 Nepal Earth Quake on the Deep Groudwater Outflow in a Thousand-Mile-Away Geothermal Field in Southern China's Guangdong

NASA Astrophysics Data System (ADS)

Lu, G.; Yu, S.; Xu, F.; Wang, X.; Yan, K.; Yuen, D. A.

2015-12-01

Deep ground waters sustain high temperature and pressure and are susceptible to impact from an earthquake. How an earthquake would have been associated with long-range effect on geological environment of deep groundwater is a question of interest to the scientific community and general public. The massive Richter 8.1 Nepal Earthquake (on April 25, 2015) provided a rare opportunity to test the response of deep groundwater systems. Deep ground waters at elevated temperature would naturally flow to ground surface along preferential flow path such as a deep fault, forming geothermal water flows. Geothermal water flows are susceptible to stress variation and can reflect the physical conditions of supercritical hot water kilometers deep down inside the crust. This paper introduces the monitoring work on the outflow in Xijiang Geothermal Field of Xinyi City, Guangdong Province in southern China. The geothermal field is one of typical geothermal fields with deep faults in Guangdong. The geothermal spring has characteristic daily variation of up to 72% in flow rate, which results from being associated with a north-south run deep fault susceptible to earthquake event. We use year-long monitoring data to illustrate how the Nepal earthquake would have affected the flows at the field site over 2.5 thousand kilometers away. The irregularity of flow is judged by deviation from otherwise good correlation of geothermal spring flow with solid earth tidal waves. This work could potentially provide the basis for further study of deep groundwater systems and insight to earthquake prediction.

Ground-water resources of the south metropolitan Atlanta region, Georgia

USGS Publications Warehouse

Clarke, John S.; Peck, Michael F.

1991-01-01

Ground-water resources of the nine county south metropolitan Atlanta region were evaluated in response to an increased demand for water supplies and concern that existing surface water supplies may not be able to meet future supply demands. Previous investigations have suggested that crystalline rock in the study area has low permeability and can not sustain well yields suitable for public supply. However, the reported yield for 406 wells drilled into crystalIine rock units in this area ranged from less than 1 to about 700 gallons per minute, and averaged 43 gallons per minute. The reported flow from 13 springs ranged from 0.5 to 679 gallons per minute. The yield of 43 wells and flow from five springs was reported to exceed 100 gallons per minute. Most of the high-yielding wells and springs were near contact zones between rocks of contrasting lithologic and weathering properties. The high-yielding wells and springs are located in a variety of topographic settings: hillsides, upland draws, and hilltops were most prevalent.The study area, which includes Henry, Fayette, Coweta, Spalding, Lamar, Pike, Meriwether, Upson and Talbot Counties, is within the Piedmont physiographic province except for the southernmost part of Talbot County, which is in the Coastal Plain physiographic province. In the Piedmont, ground-water storage occurs in joints, fractures and other secondary openings in the bedrock, and in pore spaces in the regolith. The most favorable geologic settings for siting highyielding wells are along contact zones between rocks of contrasting lithology and permeability, major zones of fracturing such as the Towaliga and Auchumpkee fault zones, and other numerous shear and microbreccia zones.Although most wells in the study area are from 101 to 300 feet deep, the highest average yields were obtained from wells 51 to 100 feet deep, and 301 to 500 feet deep. Of the wells inventoried, the average diameter of well casing was largest for wells located on hills and ridges, possibly indicating a preference for such topographic locations by cities and industrial users who typically develop larger diameter wells than do domestic users. Generally, for a given depth range or well diameter, the highest yielding wells were obtained in draws and valleys, followed by hills and ridges and slopes and flats.In 1985, wells and springs supplied about 16 million gallons per day or 37 percent of the total water withdrawn in the area. Average recharge to the aquifers in the upper Flint River basin, which constitutes 66 percent of the area, was estimated to be about 575 million gallons per day. Groundwater recharge in this basin ranged from 414 million gallons per day during an average dry year, to 77 million gallons per day during an average wet year. During the severe drought of 1954, the estimated recharge was 70 million gallons per day.Ground water in the study area generally is suitable for most uses. With the exception of local occurences of excessive iron, fluoride, and manganese, concentrations of total and/or dissolved constituents generally meets State and Federal drinking water standards. Ground-water quality may be affected by the presence of radionuclides associated with the decay of uranium found in igneous and metamorphic rocks.

Telecommunications and navigation systems design for manned Mars exploration missions

NASA Astrophysics Data System (ADS)

Hall, Justin R.; Hastrup, Rolf C.

1989-06-01

This paper discusses typical manned Mars exploration needs for telecommunications, including preliminary navigation support functions. It is a brief progress report on an ongoing study program within the current NASA JPL Deep Space Network (DSN) activities. A typical Mars exploration case is defined, and support approaches comparing microwave and optical frequency performance for both local in situ and Mars-earth links are described. Optical telecommunication and navigation technology development opportunities in a Mars exploration program are also identified. A local Mars system telecommunication relay and navigation capability for service support of all Mars missions has been proposed as part of an overall solar system communications network. The effects of light-time delay and occultations on real-time mission decision-making are discussed; the availability of increased local mass data storage may be more important than increasing peak data rates to earth. The long-term frequency use plan will most likely include a mix of microwave, millimeter-wave and optical link capabilities to meet a variety of deep space mission needs.

Telecommunications and navigation systems design for manned Mars exploration missions

NASA Technical Reports Server (NTRS)

Hall, Justin R.; Hastrup, Rolf C.

1989-01-01

This paper discusses typical manned Mars exploration needs for telecommunications, including preliminary navigation support functions. It is a brief progress report on an ongoing study program within the current NASA JPL Deep Space Network (DSN) activities. A typical Mars exploration case is defined, and support approaches comparing microwave and optical frequency performance for both local in situ and Mars-earth links are described. Optical telecommunication and navigation technology development opportunities in a Mars exploration program are also identified. A local Mars system telecommunication relay and navigation capability for service support of all Mars missions has been proposed as part of an overall solar system communications network. The effects of light-time delay and occultations on real-time mission decision-making are discussed; the availability of increased local mass data storage may be more important than increasing peak data rates to earth. The long-term frequency use plan will most likely include a mix of microwave, millimeter-wave and optical link capabilities to meet a variety of deep space mission needs.

Experimental Investigations on Formability of Aluminum Tailor Friction Stir Welded Blanks in Deep Drawing Process

NASA Astrophysics Data System (ADS)

Kesharwani, R. K.; Panda, S. K.; Pal, S. K.

2015-02-01

In the present work, tailor friction stir welded blanks (TFSWBs) were fabricated successfully using 2.0-mm-thick AA5754-H22 and AA5052-H32 sheet metals with optimized tool design and process parameters. Taguchi L9 orthogonal array has been used to design the friction stir welding experiments, and the Grey relational analysis has been applied for the multi objective optimization in order to maximize the weld strength and total elongation reducing the surface roughness and energy consumption. The formability of the TFSWBs and parent materials was evaluated and compared in terms of limiting drawing ratio (LDR) using a conventional circular die. It was found that the formability of the TFSWBs was comparable with that of both the parent materials without failure in the weldment. A modified conical tractrix die (MCTD) was proposed to enhance the LDR of the TFSWBs. It was found that the formability was improved by 27% using the MCTD.

Lyman-α emitters in the context of hierarchical galaxy formation: predictions for VLT/MUSE surveys

NASA Astrophysics Data System (ADS)

Garel, T.; Guiderdoni, B.; Blaizot, J.

2016-02-01

The VLT/Multi Unit Spectrograph Explorer (MUSE) integral-field spectrograph can detect Lyα emitters (LAE) in the redshift range 2.8 ≲ z ≲ 6.7 in a homogeneous way. Ongoing MUSE surveys will notably probe faint Lyα sources that are usually missed by current narrow-band surveys. We provide quantitative predictions for a typical wedding-cake observing strategy with MUSE based on mock catalogues generated with a semi-analytic model of galaxy formation coupled to numerical Lyα radiation transfer models in gas outflows. We expect ≈1500 bright LAEs (FLyα ≳ 10-17 erg s-1 cm-2) in a typical shallow field (SF) survey carried over ≈100 arcmin2 , and ≈2000 sources as faint as 10-18 erg s-1 cm-2 in a medium-deep field (MDF) survey over 10 arcmin2 . In a typical deep field (DF) survey of 1 arcmin2 , we predict that ≈500 extremely faint LAEs (FLyα ≳ 4 × 10-19 erg s-1 cm-2) will be found. Our results suggest that faint Lyα sources contribute significantly to the cosmic Lyα luminosity and SFR budget. While the host haloes of bright LAEs at z ≈ 3 and 6 have descendants with median masses of 2 × 1012 and 5 × 1013 M⊙, respectively, the faintest sources detectable by MUSE at these redshifts are predicted to reside in haloes which evolve into typical sub-L* and L* galaxy haloes at z = 0. We expect typical DF and MDF surveys to uncover the building blocks of Milky Way-like objects, even probing the bulk of the stellar mass content of LAEs located in their progenitor haloes at z ≈ 3.

Iterating between Tools to Create and Edit Visualizations.

PubMed

Bigelow, Alex; Drucker, Steven; Fisher, Danyel; Meyer, Miriah

2017-01-01

A common workflow for visualization designers begins with a generative tool, like D3 or Processing, to create the initial visualization; and proceeds to a drawing tool, like Adobe Illustrator or Inkscape, for editing and cleaning. Unfortunately, this is typically a one-way process: once a visualization is exported from the generative tool into a drawing tool, it is difficult to make further, data-driven changes. In this paper, we propose a bridge model to allow designers to bring their work back from the drawing tool to re-edit in the generative tool. Our key insight is to recast this iteration challenge as a merge problem - similar to when two people are editing a document and changes between them need to reconciled. We also present a specific instantiation of this model, a tool called Hanpuku, which bridges between D3 scripts and Illustrator. We show several examples of visualizations that are iteratively created using Hanpuku in order to illustrate the flexibility of the approach. We further describe several hypothetical tools that bridge between other visualization tools to emphasize the generality of the model.

Pathological alterations typical of human Tay-Sachs disease, in the retina of a deep-sea fish.

PubMed

Fishelson, L; Delarea, Y; Galil, B S

2000-08-01

Micrographs of retinas from the deep-sea fish Cataetyx laticeps revealed visual cells containing membranous whorls in the ellipsoids of the inner segments resulting from stretching and modifications of the mitochondria membranes and their cristae. These pathological structures seem to be homologous to the whorls observed in retinas of human carriers of Tay-Sachs disease. This disease, a genetic disorder, is found in humans and some mammals. Our findings in fish suggest that the gene responsible can be found throughout the vertebrate evolutionary tree, possibly dormant in most taxa.

Long and Short Range Correlations in Healthy and Pathologic Human Cardiac Prosses

NASA Astrophysics Data System (ADS)

Bunde, Armin

2001-03-01

Healthy sleep consists of several stages: deep sleep, light sleep and REM sleep. In this talk, recent work on the characterization of heart-rates in the three stages by long-range correlations is presented. Only in REM sleep, long-range correlations reminiscent to the wake phase occur, and the heart-rates show multifractal behaviour. In contrast, in non-REM phases, the heart-rates are uncorrelated above the typical breathing cycle time, pointing to a random regulation of the heartbeat during non-REM sleep. In deep sleep, the heart-rates show simple multifractal behaviour.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sverjensky, Dimitri A.; Huang, Fang

Diamond formation has typically been attributed to redox reactions during precipitation from fluids or magmas. Either the oxidation of methane or the reduction of carbon dioxide has been suggested, based on simplistic models of deep fluids consisting of mixtures of dissolved neutral gas molecules without consideration of aqueous ions. The role of pH changes associated with water–silicate rock interactions during diamond formation is unknown. Here we show that diamonds could form due to a drop in pH during water–rock interactions. We use a recent theoretical model of deep fluids that includes ions, to show that fluid can react irreversibly withmore » eclogite at 900 °C and 5.0 GPa, generating diamond and secondary minerals due to a decrease in pH at almost constant oxygen fugacity. Overall, our results constitute a new quantitative theory of diamond formation as a consequence of the reaction of deep fluids with the rock types that they encounter during migration. Diamond can form in the deep Earth during water–rock interactions without changes in oxidation state.« less

Deployment of the Oklahoma borehole seismic experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harben, P.E.; Rock, D.W.

1989-01-20

This paper discusses the Oklahoma borehole seismic experiment, currently in operation, set up by members of the Lawrence Livermore National Laboratory Treaty Verification Program and the Oklahoma Geophysical Observatory to determine deep-borehole seismic characteristics in geology typical of large regions in the Soviet Union. We evaluated and logged an existing 772-m deep borehole on the Observatory site by running caliper, cement bonding, casing inspection, and hole-deviation logs. Two Teledyne Geotech borehole-clamping seismometers were placed at various depths and spacings in the deep borehole. Currently, they are deployed at 727 and 730 m. A Teledyne Geotech shallow-borehole seismometer was mounted inmore » a 4.5-m hole, one meter from the deep borehole. The seismometers' system coherency were tested and found to be excellent to 35 Hz. We have recorded seismic noise, quarry blasts, regional earthquakes and teleseisms in the present configuration. We will begin a study of seismic noise and attenuation as a function of depth in the near future. 7 refs., 18 figs.« less

Analysis of the Lankford coefficient evolution at different strain rates for AA6016-T4, DP800 and DC06

NASA Astrophysics Data System (ADS)

Lenzen, Matthias; Merklein, Marion

2017-10-01

In the automotive sector, a major challenge is the deep-drawing of modern lightweight sheet metals with limited formability. Thus, conventional material models lack in accuracy due to the complex material behavior. A current field of research takes into account the evolution of the Lankford coefficient. Today, changes in anisotropy under increasing degree of deformation are not considered. Only a consolidated average value of the Lankford coefficient is included in conventional material models. This leads to an increasing error in prediction of the flow behavior and therefore to an inaccurate prognosis of the forming behavior. To increase the accuracy of the prediction quality, the strain dependent Lankford coefficient should be respected, because the R-value has a direct effect on the contour of the associated flow rule. Further, the investigated materials show a more or less extinct rate dependency of the yield stress. For this reason, the rate dependency of the Lankford coefficient during uniaxial tension is focused within this contribution. To quantify the influence of strain rate on the Lankford coefficient, tensile tests are performed for three commonly used materials, the aluminum alloy AA6016-T4, the advanced high strength steel DP800 and the deep drawing steel DC06 at three different strain rates. The strain measurement is carried out by an optical strain measurement system. An evolution of the Lankford coefficient was observed for all investigated materials. Also, an influence of the deformation velocity on the anisotropy could be detected.

Application Of A New Semi-Empirical Model For Forming Limit Prediction Of Sheet Material Including Superposed Loads Of Bending And Shearing

NASA Astrophysics Data System (ADS)

Held, Christian; Liewald, Mathias; Schleich, Ralf; Sindel, Manfred

2010-06-01

The use of lightweight materials offers substantial strength and weight advantages in car body design. Unfortunately such kinds of sheet material are more susceptible to wrinkling, spring back and fracture during press shop operations. For characterization of capability of sheet material dedicated to deep drawing processes in the automotive industry, mainly Forming Limit Diagrams (FLD) are used. However, new investigations at the Institute for Metal Forming Technology have shown that High Strength Steel Sheet Material and Aluminum Alloys show increased formability in case of bending loads are superposed to stretching loads. Likewise, by superposing shearing on in plane uniaxial or biaxial tension formability changes because of materials crystallographic texture. Such mixed stress and strain conditions including bending and shearing effects can occur in deep-drawing processes of complex car body parts as well as subsequent forming operations like flanging. But changes in formability cannot be described by using the conventional FLC. Hence, for purpose of improvement of failure prediction in numerical simulation codes significant failure criteria for these strain conditions are missing. Considering such aspects in defining suitable failure criteria which is easy to implement into FEA a new semi-empirical model has been developed considering the effect of bending and shearing in sheet metals formability. This failure criterion consists of the combination of the so called cFLC (combined Forming Limit Curve), which considers superposed bending load conditions and the SFLC (Shear Forming Limit Curve), which again includes the effect of shearing on sheet metal's formability.

Helping Young Children Manage Stress.

ERIC Educational Resources Information Center

Texas Child Care, 2002

2002-01-01

Describes the common symptoms of stress exhibited by young children including: (1) social or behavioral; (2) physical; (3) emotional; (4) cognitive; and (5) language. Addresses causes of stress, which typically represent change, fear, or loss in children. Offers strategies for easing children's stress including muscle relaxation, deep breathing,…

Comparison of five tillage systems in coastal plain soils for cotton production

USDA-ARS?s Scientific Manuscript database

Soil compaction management in the southeastern USA typically relies heavily on the practice of annual deep tillage. Strip tillage systems have shown considerable promise for reducing energy and labor requirements, equipment costs, soil erosion, and cotton plant damage from blowing sand. Replicated f...

Discovery of asphalt seeps in the deep Southwest Atlantic off Brazil

NASA Astrophysics Data System (ADS)

Fujikura, Katsunori; Yamanaka, Toshiro; Sumida, Paulo Y. G.; Bernardino, Angelo F.; Pereira, Olivia S.; Kanehara, Toshiyuki; Nagano, Yuriko; Nakayama, Cristina R.; Nobrega, Marcos; Pellizari, Vivian H.; Shigeno, Shuichi; Yoshida, Takao; Zhang, Jing; Kitazato, Hiroshi

2017-12-01

The discovery and description of cold seeps with deep-sea chemosynthetic communities in the Southwest Atlantic Ocean are still incomplete, despite the large proven oil and gas reserves off the coast of Brazil. In the southeastern Brazilian continental margin, where over 71% of the country's oil and gas production takes place, there are previous geological and qualitative biological evidence of seep biota associated with pockmarks on the upper slope of the Santos Basin. In order to further study seep ecosystems on the Brazilian margin, a deep-sea investigation named Iatá-Piúna cruise was conducted using the human-occupied vehicle Shinkai 6500 off Brazil's southeast continental margin. Asphalt seeps were discovered on the seafloor of the North São Paulo Plateau from depths of 2652-2752 m, representing only the third discovery of this type of seep worldwide, following those in the Gulf of Mexico and off Angola. Video and isotopic analyses indicated a number of megabenthic animals in the asphalt seeps in the North São Paulo Plateau and revealed typical deep-sea heterotrophic and photosynthesis-based fauna occupying hard substrates provided by the asphalt seep. There was no evidence of chemosynthesis-based megabenthic fauna such as vesicomyid clams, Bathymodiolus mussels, and siboglinid tube worms, or any sediment bacterial mats, gas seepage, and carbonate rock in/around the seeps. The benthic fauna was composed mainly of sponges (ca. 15 species), such as the hexactinellids Caulophacus sp., Poliopogon amadou, Saccocalyx pedunculatus, Farrea occa and cf. Chonelasma choanoides; besides typical deep-sea isidid octocorals, brisingid starfishes and galatheid crabs. The δ13C values of poriferan sponges suggested a heterotrophic and pelagic nutrition. Geochemical analyses of asphalt revealed a heavy biodegradation of hydrocarbon molecules, supported by the depletion of light n-alkanes and other labile compounds. This advanced asphalt biodegradation is the likely reason for the absence of chemosynthetic communities at these seep sites.

Deep Charging Evaluation of Satellite Power and Communication System Components

NASA Technical Reports Server (NTRS)

Schneider, T. A.; Vaughn, J. A.; Chu, B.; Wong, F.; Gardiner, G.; Wright, K. H.; Phillips, B.

2016-01-01

Deep charging, in contrast to surface charging, focuses on electron penetration deep into insulating materials applied over conductors. A classic example of this scenario is an insulated wire. Deep charging can pose a threat to material integrity, and to sensitive electronics, when it gives rise to an electrostatic discharge or arc. With the advent of Electric Orbit Raising, which requires spiraling through Earth's radiation belts, satellites are subjected to high energy electron environments which they normally would not encounter. Beyond Earth orbit, missions to Jupiter and Saturn face deep charging concerns due to the high energy radiation environments. While predictions can be made about charging in insulating materials, it is difficult to extend those predictions to complicated geometries, such as the case of an insulating coating around a small wire, or a non-uniform silicone grouting on a bus bar. Therefore, to conclusively determine the susceptibility of a system to arcs from deep charging, experimental investigations must be carried out. This paper will describe the evaluation carried out by NASA's Marshall Space Flight Center on subscale flight-like samples developed by Space Systems/Loral, LLC. Specifically, deep charging evaluations of solar array wire coupons, a photovoltaic cell coupon, and a coaxial microwave transmission cable, will be discussed. The results of each evaluation will be benchmarked against control sample tests, as well as typical power system levels, to show no significant deep charging threat existed for this set of samples under the conditions tested.

Developing a Tool to Evaluate Differences in Beliefs about Science Teaching and Learning among Freshman Science Student Teachers from Different Science Teaching Domains: A Case Study

ERIC Educational Resources Information Center

Markic, Silvija; Eilks, Ingo; Valanides, Nicos

2008-01-01

This paper presents a pilot case study on developing a qualitative tool to evaluate science student teachers' beliefs concerning science teaching and learning. The study is based on student teachers' drawings of themselves in a typical classroom situation and four open questions. Data was collected from 104 freshman science student teachers, and…

A Case Study on German First Year Chemistry Student Teachers' Beliefs about Chemistry Teaching, and Their Comparison with Student Teachers from Other Science Teaching Domains

ERIC Educational Resources Information Center

Markic, Silvija; Eilks, Ingo

2008-01-01

This paper gives insights into the beliefs of 85 German first year chemistry student teachers about chemistry teaching and learning at the beginning of their teacher education. The study is based on student teachers' drawings of themselves in a typical classroom situation and four open questions. The approach evaluated: (I) Beliefs about Classroom…

Movement Issues Identified in Movement ABC2 Checklist Parent Ratings for Students with Persisting Dysgraphia, Dyslexia, and OWL LD and Typical Literacy Learners

ERIC Educational Resources Information Center

Nielsen, Kathleen; Henderson, Sheila; Barnett, Anna L.; Abbott, Robert D.; Berninger, Virginia

2018-01-01

Movement, which draws on motor skills and executive functions for managing them, plays an important role in literacy learning (e.g., movement of mouth during oral reading and movement of hand and fingers during writing); but relatively little research has focused on movement skills in students with specific learning disabilities as the current…

Gender Privilege and the Culture of the Ontario School System: A Mid- to Late Twentieth-Century Case Study of a Male Public School Professional

ERIC Educational Resources Information Center

Wilcox, Beth

2015-01-01

This study uses an adapted public history methodology of a local case study to analyze interviews conducted with a former Ontario teacher and principal. It draws on literature and historical documents regarding teaching between the 1950s-1980s to examine the typical experience of public school professionals in that time and discuss structural…

Display technology - Human factors concepts

NASA Astrophysics Data System (ADS)

Stokes, Alan; Wickens, Christopher; Kite, Kirsten

1990-03-01

Recent advances in the design of aircraft cockpit displays are reviewed, with an emphasis on their applicability to automobiles. The fundamental principles of display technology are introduced, and individual chapters are devoted to selective visual attention, command and status displays, foveal and peripheral displays, navigational displays, auditory displays, color and pictorial displays, head-up displays, automated systems, and dual-task performance and pilot workload. Diagrams, drawings, and photographs of typical displays are provided.

Classify epithelium-stroma in histopathological images based on deep transferable network.

PubMed

Yu, X; Zheng, H; Liu, C; Huang, Y; Ding, X

2018-04-20

Recently, the deep learning methods have received more attention in histopathological image analysis. However, the traditional deep learning methods assume that training data and test data have the same distributions, which causes certain limitations in real-world histopathological applications. However, it is costly to recollect a large amount of labeled histology data to train a new neural network for each specified image acquisition procedure even for similar tasks. In this paper, an unsupervised domain adaptation is introduced into a typical deep convolutional neural network (CNN) model to mitigate the repeating of the labels. The unsupervised domain adaptation is implemented by adding two regularisation terms, namely the feature-based adaptation and entropy minimisation, to the object function of a widely used CNN model called the AlexNet. Three independent public epithelium-stroma datasets were used to verify the proposed method. The experimental results have demonstrated that in the epithelium-stroma classification, the proposed method can achieve better performance than the commonly used deep learning methods and some existing deep domain adaptation methods. Therefore, the proposed method can be considered as a better option for the real-world applications of histopathological image analysis because there is no requirement for recollection of large-scale labeled data for every specified domain. © 2018 The Authors Journal of Microscopy © 2018 Royal Microscopical Society.

Bottom-up and top-down triggers of diversification: A new look at the evolutionary ecology of scavenging amphipods in the deep sea

NASA Astrophysics Data System (ADS)

Havermans, Charlotte; Smetacek, Victor

2018-05-01

The initial, anthropocentric view of the deep ocean was that of a hostile environment inhabited by organisms rendered lethargic by constant high pressure, low temperature and sparse food supply, hence evolving slowly. This conceptual framework of a spatially and temporally homogeneous, connected, strongly bottom-up controlled habitat implied a strong constraint on, or poor incentive for, speciation. Hence, the discovery in the late 1960s of high species diversity of abyssal benthic invertebrates came as a surprise. Since then, the slow-motion view of deep-sea ecology and evolution has speeded up and diversified in the light of increasing evidence accumulating from in situ visual observations complemented by molecular and other tools. The emerging picture is that of a much livelier, highly diversified and more complex deep-sea fauna than previously assumed. In this review we examine the consequences of the incoming information for developing a broader view of evolutionary ecology in the deep sea, and for scavenging amphipods in particular. We revisit the food supply to the deep-sea floor and hypothesize that the dead bodies of animals, ranging from zooplankton to large fish are likely to be a more important source of food than their friable faeces. Camera observations of baited traps indicate that amphipod carrion-feeders arrive within hours at the bait which continues to draw new individuals for days to months later, presumably by scent trails in tidal currents. We explore the different stages of food acquisition upon which natural selection may have acted, from detection to ingestion, and discuss the possibility of a broader range of food acquisition strategies, including predation and specializations. Although currently neglected in deep-sea ecology, top-down factors are likely to play a more important role in the evolution of deep-sea organisms. Predation on amphipods at baits by bathyal and abyssal fishes, and large predatory crustaceans in the hadal zone, is often observed. Finally, we develop hypotheses regarding the effects of past, present and imminent anthropogenic activities on scavenger biomass and how these can be tested with the most modern tools.

Obtaining big data of vegetation using artificial neural network

NASA Astrophysics Data System (ADS)

Ise, T.; Minagawa, M.; Onishi, M.

2017-12-01

To carry out predictive studies concerning ecosystems, obtaining appropriate datasets is one of the key factors. Recently, applications of neural network such as deep learning have successfully overcome difficulties in data acquisition and added large datasets for predictive science. For example, deep learning is very powerful in identifying and counting people, cars, etc. However, for vegetation science, deep learning has not been widely used. In general, differing from animals, plants have characteristics of modular growth. For example, numbers of leaves and stems which one individual plant typically possesses are not predetermined but change flexibly according to environmental conditions. This is clearly different from that the standard model of human face has predetermined numbers of parts, such as two eyes, one mouth, and so on. This characteristics of plants can make object identification difficult. In this study, a simple but effective technique was used to overcome the difficulty of visual identification of plants, and automated classification of plant types and quantitative analyses were become possible. For instance, when our method was applied to classify bryophytes, one of the most difficult plant types for computer vision due to their amorphous shapes, the performance of identification model was typically over 90% success. With this technology, it may be possible to obtain the big data of plant type, size, density etc. from satellite and/or drone imageries, in a quantitative manner. this will allow progress in predictive biogeosciences.

Morphological divergence between three Arctic charr morphs - the significance of the deep-water environment.

PubMed

Skoglund, Sigrid; Siwertsson, Anna; Amundsen, Per-Arne; Knudsen, Rune

2015-08-01

Morphological divergence was evident among three sympatric morphs of Arctic charr (Salvelinus alpinus (L.)) that are ecologically diverged along the shallow-, deep-water resource axis in a subarctic postglacial lake (Norway). The two deep-water (profundal) spawning morphs, a benthivore (PB-morph) and a piscivore (PP-morph), have evolved under identical abiotic conditions with constant low light and temperature levels in their deep-water habitat, and were morphologically most similar. However, they differed in important head traits (e.g., eye and mouth size) related to their different diet specializations. The small-sized PB-morph had a paedomorphic appearance with a blunt head shape, large eyes, and a deep body shape adapted to their profundal lifestyle feeding on submerged benthos from soft, deep-water sediments. The PP-morph had a robust head, large mouth with numerous teeth, and an elongated body shape strongly related to their piscivorous behavior. The littoral spawning omnivore morph (LO-morph) predominantly utilizes the shallow benthic-pelagic habitat and food resources. Compared to the deep-water morphs, the LO-morph had smaller head relative to body size. The LO-morph exhibited traits typical for both shallow-water benthic feeding (e.g., large body depths and small eyes) and planktivorous feeding in the pelagic habitat (e.g., streamlined body shape and small mouth). The development of morphological differences within the same deep-water habitat for the PB- and PP-morphs highlights the potential of biotic factors and ecological interactions to promote further divergence in the evolution of polymorphism in a tentative incipient speciation process. The diversity of deep-water charr in this study represents a novelty in the Arctic charr polymorphism as a truly deep-water piscivore morph has to our knowledge not been described elsewhere.

Existing Whole-House Solutions Case Study: Retrofitting a 1960s Split-Level Cold-Climate Home

DOE Office of Scientific and Technical Information (OSTI.GOV)

Puttagunta, S.

2015-08-01

National programs such as Home Performance with ENERGY STAR® and numerous other utility air sealing programs have brought awareness to homeowners of the benefits of energy efficiency retrofits. Yet, these programs tend to focus on the low-hanging fruit: air-sealing the thermal envelope and ductwork where accessible, switch to efficient lighting, and low-flow fixtures. At the other end of the spectrum, deep-energy retrofit programs are also being encouraged by various utilities across the country. While deep energy retrofits typically seek 50% energy savings, they are often quite costly and most applicable to gut-rehab projects. A significant potential for lowering energy usagemore » in existing homes lies between the low hanging fruit and deep energy retrofit approaches - retrofits that save approximately 30% in energy over the existing conditions.« less

Future Mission Trends and their Implications for the Deep Space Network

NASA Technical Reports Server (NTRS)

Abraham, Douglas S.

2006-01-01

Planning for the upgrade and/or replacement of Deep Space Network (DSN) assets that typically operate for forty or more years necessitates understanding potential customer needs as far into the future as possible. This paper describes the methodology Deep Space Network (DSN) planners use to develop this understanding, some key future mission trends that have emerged from application of this methodology, and the implications of the trends for the DSN's future evolution. For NASA's current plans out to 2030, these trends suggest the need to accommodate: three times as many communication links, downlink rates two orders of magnitude greater than today's, uplink rates some four orders of magnitude greater, and end-to-end link difficulties two-to-three orders of magnitude greater. To meet these challenges, both DSN capacity and capability will need to increase.

Long term soil pH change in rainfed cropping systems: is acidification systemic?

USDA-ARS?s Scientific Manuscript database

Many soils throughout the northern Great Plains developed from deep, moderately-weathered glacial and loess deposits under prairie vegetation. Soils of this type are typically neutral to slightly acidic in near-surface depths, and slightly to strongly alkaline in subsoil depths, with high buffer cap...

Creating deep soil core monoliths: Beyond the solum

USDA-ARS?s Scientific Manuscript database

Soil monoliths serve as useful teaching aids in the study of the Earth’s critical zone where rock, soil, water, air, and organisms interact. Typical monolith preparation has so far been confined to the 1 to 2-m depth of the solum. Critical ecosystem services provided by soils include materials from ...

Monitoring infiltration and recharge of playa lakes in the Texas Southern High Plains

USDA-ARS?s Scientific Manuscript database

Preliminary results from playa lakes monitored by the Texas Water Development Board (TWDB) suggest that a small volume of deep infiltration and recharge to the Ogallala aquifer occurs along the margins of the lake beds, while the majority of infiltration associated with a typical inundation remains ...

Natural Language Video Description using Deep Recurrent Neural Networks

DTIC Science & Technology

2015-11-23

records who says what, but lacks tim- ing information. Movie scripts typically include names of all characters and most movies loosely follow the...and Jürgen Schmidhuber. A novel approach to on-line handwriting recognition based on bidirectional long short-term memory networks. In Proc. 9th Int

Field testing of jet-grouted piles and drilled shafts.

DOT National Transportation Integrated Search

2014-01-01

A field study of deep foundations supporting high mast lighting and signage was undertaken in typical Florida : soils. Three drilled shafts (48 in x12 ft and two 48 in x18 ft) and two jet-grouted piles (28 in x18 ft) were : constructed in Keystone He...

Functional correlates of the therapeutic and adverse effects evoked by thalamic stimulation for essential tremor

PubMed Central

Gibson, William S.; Jo, Hang Joon; Testini, Paola; Cho, Shinho; Felmlee, Joel P.; Welker, Kirk M.; Klassen, Bryan T.; Min, Hoon-Ki

2016-01-01

Deep brain stimulation is an established neurosurgical therapy for movement disorders including essential tremor and Parkinson’s disease. While typically highly effective, deep brain stimulation can sometimes yield suboptimal therapeutic benefit and can cause adverse effects. In this study, we tested the hypothesis that intraoperative functional magnetic resonance imaging could be used to detect deep brain stimulation-evoked changes in functional and effective connectivity that would correlate with the therapeutic and adverse effects of stimulation. Ten patients receiving deep brain stimulation of the ventralis intermedius thalamic nucleus for essential tremor underwent functional magnetic resonance imaging during stimulation applied at a series of stimulation localizations, followed by evaluation of deep brain stimulation-evoked therapeutic and adverse effects. Correlations between the therapeutic effectiveness of deep brain stimulation (3 months postoperatively) and deep brain stimulation-evoked changes in functional and effective connectivity were assessed using region of interest-based correlation analysis and dynamic causal modelling, respectively. Further, we investigated whether brain regions might exist in which activation resulting from deep brain stimulation might correlate with the presence of paraesthesias, the most common deep brain stimulation-evoked adverse effect. Thalamic deep brain stimulation resulted in activation within established nodes of the tremor circuit: sensorimotor cortex, thalamus, contralateral cerebellar cortex and deep cerebellar nuclei (FDR q < 0.05). Stimulation-evoked activation in all these regions of interest, as well as activation within the supplementary motor area, brainstem, and inferior frontal gyrus, exhibited significant correlations with the long-term therapeutic effectiveness of deep brain stimulation (P < 0.05), with the strongest correlation (P < 0.001) observed within the contralateral cerebellum. Dynamic causal modelling revealed a correlation between therapeutic effectiveness and attenuated within-region inhibitory connectivity in cerebellum. Finally, specific subregions of sensorimotor cortex were identified in which deep brain stimulation-evoked activation correlated with the presence of unwanted paraesthesias. These results suggest that thalamic deep brain stimulation in tremor likely exerts its effects through modulation of both olivocerebellar and thalamocortical circuits. In addition, our findings indicate that deep brain stimulation-evoked functional activation maps obtained intraoperatively may contain predictive information pertaining to the therapeutic and adverse effects induced by deep brain stimulation. PMID:27329768

Influence of Drawbeads in Deep-Drawing of Plane-Strain Channel Sections: Experimental and FE Analysis

NASA Astrophysics Data System (ADS)

Oliveira, M. C.; Baptista, A. J.; Alves, J. L.; Menezes, L. F.; Green, D. E.; Ghaei, A.

2007-05-01

The main purpose of the "Numisheet'05 Benchmark♯3: Channel Draw/Cylindrical Cup" was to evaluate the forming characteristics of materials in multi-stage processes. The concept was to verify the strain fields achieved during the two stage forming process and also to test the ability of numerical models to predict both strain and stress fields. The first stage consisted of forming channel sections in an industrial-scale channel draw die. The material that flows through the drawbead and over the die radii into the channel sidewalls is prestrained by cyclic bending and unbending. The prestrained channel sidewalls are subsequently cut and subjected to near plane-strain Marciniak-style cup test. This study emphasizes the analysis of the first stage process, the Channel Draw, since accurate numerical results for the first stage forming and springback are essential to guarantee proper initial state variables for the subsequent stage simulation. Four different sheet materials were selected: mild steel AKDQ-HDG, high strength steel HSLA-HDG, dual phase steel DP600-HDG and an aluminium alloy AA6022-T43. The four sheet materials were formed in the same channel draw die, but with drawbead penetrations of 25%, 50% and 100%. This paper describes the testing and measurement procedures for the numerical simulation of these conditions with DD3IMP FE code. A comparison between experimental and numerical simulation results for the first stage is presented. The experimental results indicate that an increase in drawbead penetration is accompanied by a general decrease in springback, with both sidewall radius of curvature and the sidewall angle increasing with increasing drawbead penetration. An exception to this trend occurs at the shallowest bead penetration: the radius of curvature in the sidewall is larger than expected. The sequence of cyclic tension and compression is numerically studied for each drawbead penetration in order to investigate this phenomenon.

Regional nitrate and pesticide trends in ground water in the eastern San Joaquin Valley, California

USGS Publications Warehouse

Burow, K.R.; Shelton, James L.; Dubrovsky, N.M.

2008-01-01

Protection of ground water for present and future use requires monitoring and understanding of the mechanisms controlling long-term quality of ground water. In this study, spatial and temporal trends in concentrations of nitrate and pesticides in ground water in the eastern San Joaquin Valley, California, were evaluated to determine the long-term effects of agricultural and urban development on regional ground-water quality. Trends in concentrations of nitrate, the nematocide 1,2-dibromo-3-chloropropane, and the herbicide simazine during the last two decades are generally consistent with known nitrogen fertilizer and pesticide use and with the position of the well networks in the regional ground-water flow system. Concentrations of nitrate and pesticides are higher in the shallow part of the aquifer system where domestic wells are typically screened, whereas concentrations are lower in the deep part of the aquifer system where public-supply wells are typically screened. Attenuation processes do not seem to significantly affect concentrations. Historical data indicate that concentrations of nitrate have increased since the 1950s in the shallow and deep parts of the aquifer system. Concentrations of nitrate and detection of pesticides in the deep part of the aquifer system will likely increase as the proportion of highly affected water contributed to these wells increases with time. Because of the time of travel between the water table and the deep part of the aquifer system, current concentrations in public-supply wells likely reflect the effects of 40- to 50-yr-old management practices. Copyright ?? 2008 by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America. All rights reserved.

Depth and activity of carious lesions as indicators for the regenerative potential of dental pulp after intervention.

PubMed

Bjørndal, Lars; Demant, Sune; Dabelsteen, Sally

2014-04-01

Studies on dental regeneration involving interventions for pulp therapy such as regeneration and revascularization procedures are promising for the injured tooth; however, a complete replication of the original pulp tissue does not seem to take place. In cases in which we wish to preserve or maintain parts of the pulp during treatment, it is apparent that the effectiveness of healing or biological regeneration is dependent on the degree of inflammation of the pulp tissue. Thus, the control or prevention of a pulp infection is still a major issue for the clinicians. Data indicate that the typical reason for performing endodontic treatment is deep caries. The biological concept of vital pulp therapy associated with deep caries takes the treatment and evaluation of the unexposed as well as the exposed pulp into account. Interestingly, the clinical diagnosis is typically the same. Deep caries with reversible pulpitis may receive differing treatments such as excavation procedures aiming to avoid pulp exposure or more pulp invasive treatments such as pulp capping or pulpotomy. This should not be the case. Consequently, huge treatment variation is noted among clinicians based on the same caries diagnosis. Which treatment should be selected? High-quality trials are needed, and it is important to obtain information on the actual lesion depth and an estimate of the lesion activity before treatment. These may be basic indicators for the regenerative potential of dental pulp. Recent clinical trials dealing with the treatment of deep caries lesion are discussed, including pulp invasive and noninvasive concepts, to attempt to solve the task of getting the best clinical outcome for adult patients. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Validation and Uncertainty Estimates for MODIS Collection 6 "Deep Blue" Aerosol Data

NASA Technical Reports Server (NTRS)

Sayer, A. M.; Hsu, N. C.; Bettenhausen, C.; Jeong, M.-J.

2013-01-01

The "Deep Blue" aerosol optical depth (AOD) retrieval algorithm was introduced in Collection 5 of the Moderate Resolution Imaging Spectroradiometer (MODIS) product suite, and complemented the existing "Dark Target" land and ocean algorithms by retrieving AOD over bright arid land surfaces, such as deserts. The forthcoming Collection 6 of MODIS products will include a "second generation" Deep Blue algorithm, expanding coverage to all cloud-free and snow-free land surfaces. The Deep Blue dataset will also provide an estimate of the absolute uncertainty on AOD at 550 nm for each retrieval. This study describes the validation of Deep Blue Collection 6 AOD at 550 nm (Tau(sub M)) from MODIS Aqua against Aerosol Robotic Network (AERONET) data from 60 sites to quantify these uncertainties. The highest quality (denoted quality assurance flag value 3) data are shown to have an absolute uncertainty of approximately (0.086+0.56Tau(sub M))/AMF, where AMF is the geometric air mass factor. For a typical AMF of 2.8, this is approximately 0.03+0.20Tau(sub M), comparable in quality to other satellite AOD datasets. Regional variability of retrieval performance and comparisons against Collection 5 results are also discussed.

Albedo Neutron Dosimetry in a Deep Geological Disposal Repository for High-Level Nuclear Waste.

PubMed

Pang, Bo; Becker, Frank

2017-04-28

Albedo neutron dosemeter is the German official personal neutron dosemeter in mixed radiation fields where neutrons contribute to personal dose. In deep geological repositories for high-level nuclear waste, where neutrons can dominate the radiation field, it is of interest to investigate the performance of albedo neutron dosemeter in such facilities. In this study, the deep geological repository is represented by a shielding cask loaded with spent nuclear fuel placed inside a rock salt emplacement drift. Due to the backscattering of neutrons in the drift, issues concerning calibration of the dosemeter arise. Field-specific calibration of the albedo neutron dosemeter was hence performed with Monte Carlo simulations. In order to assess the applicability of the albedo neutron dosemeter in a deep geological repository over a long time scale, spent nuclear fuel with different ages of 50, 100 and 500 years were investigated. It was found out, that the neutron radiation field in a deep geological repository can be assigned to the application area 'N1' of the albedo neutron dosemeter, which is typical in reactors and accelerators with heavy shielding. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Deep-sea octopus (Graneledone boreopacifica) conducts the longest-known egg-brooding period of any animal.

PubMed

Robison, Bruce; Seibel, Brad; Drazen, Jeffrey

2014-01-01

Octopuses typically have a single reproductive period and then they die (semelparity). Once a clutch of fertilized eggs has been produced, the female protects and tends them until they hatch. In most shallow-water species this period of parental care can last from 1 to 3 months, but very little is known about the brooding of deep-living species. In the cold, dark waters of the deep ocean, metabolic processes are often slower than their counterparts at shallower depths. Extrapolations from data on shallow-water octopus species suggest that lower temperatures would prolong embryonic development periods. Likewise, laboratory studies have linked lower temperatures to longer brooding periods in cephalopods, but direct evidence has not been available. We found an opportunity to directly measure the brooding period of the deep-sea octopus Graneledone boreopacifica, in its natural habitat. At 53 months, it is by far the longest egg-brooding period ever reported for any animal species. These surprising results emphasize the selective value of prolonged embryonic development in order to produce competitive hatchlings. They also extend the known boundaries of physiological adaptations for life in the deep sea.

Deep-Sea Octopus (Graneledone boreopacifica) Conducts the Longest-Known Egg-Brooding Period of Any Animal

PubMed Central

Robison, Bruce; Seibel, Brad; Drazen, Jeffrey

2014-01-01

Octopuses typically have a single reproductive period and then they die (semelparity). Once a clutch of fertilized eggs has been produced, the female protects and tends them until they hatch. In most shallow-water species this period of parental care can last from 1 to 3 months, but very little is known about the brooding of deep-living species. In the cold, dark waters of the deep ocean, metabolic processes are often slower than their counterparts at shallower depths. Extrapolations from data on shallow-water octopus species suggest that lower temperatures would prolong embryonic development periods. Likewise, laboratory studies have linked lower temperatures to longer brooding periods in cephalopods, but direct evidence has not been available. We found an opportunity to directly measure the brooding period of the deep-sea octopus Graneledone boreopacifica, in its natural habitat. At 53 months, it is by far the longest egg-brooding period ever reported for any animal species. These surprising results emphasize the selective value of prolonged embryonic development in order to produce competitive hatchlings. They also extend the known boundaries of physiological adaptations for life in the deep sea. PMID:25075745

Zonation of Microbial Communities by a Hydrothermal Mound in the Atlantis II Deep (the Red Sea).

PubMed

Wang, Yong; Li, Jiang Tao; He, Li Sheng; Yang, Bo; Gao, Zhao Ming; Cao, Hui Luo; Batang, Zenon; Al-Suwailem, Abdulaziz; Qian, Pei-Yuan

2015-01-01

In deep-sea geothermal rift zones, the dispersal of hydrothermal fluids of moderately-high temperatures typically forms subseafloor mounds. Major mineral components of the crust covering the mound are barite and metal sulfides. As a result of the continental rifting along the Red Sea, metalliferous sediments accumulate on the seafloor of the Atlantis II Deep. In the present study, a barite crust was identified in a sediment core from the Atlantis II Deep, indicating the formation of a hydrothermal mound at the sampling site. Here, we examined how such a dense barite crust could affect the local environment and the distribution of microbial inhabitants. Our results demonstrate distinctive features of mineral components and microbial communities in the sediment layers separated by the barite crust. Within the mound, archaea accounted for 65% of the community. In contrast, the sediments above the barite boundary were overwhelmed by bacteria. The composition of microbial communities under the mound was similar to that in the sediments of the nearby Discovery Deep and marine cold seeps. This work reveals the zonation of microbial communities after the formation of the hydrothermal mound in the subsurface sediments of the rift basin.

Deep Borehole Field Test Requirements and Controlled Assumptions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hardin, Ernest

2015-07-01

This document presents design requirements and controlled assumptions intended for use in the engineering development and testing of: 1) prototype packages for radioactive waste disposal in deep boreholes; 2) a waste package surface handling system; and 3) a subsurface system for emplacing and retrieving packages in deep boreholes. Engineering development and testing is being performed as part of the Deep Borehole Field Test (DBFT; SNL 2014a). This document presents parallel sets of requirements for a waste disposal system and for the DBFT, showing the close relationship. In addition to design, it will also inform planning for drilling, construction, and scientificmore » characterization activities for the DBFT. The information presented here follows typical preparations for engineering design. It includes functional and operating requirements for handling and emplacement/retrieval equipment, waste package design and emplacement requirements, borehole construction requirements, sealing requirements, and performance criteria. Assumptions are included where they could impact engineering design. Design solutions are avoided in the requirements discussion. Deep Borehole Field Test Requirements and Controlled Assumptions July 21, 2015 iv ACKNOWLEDGEMENTS This set of requirements and assumptions has benefited greatly from reviews by Gordon Appel, Geoff Freeze, Kris Kuhlman, Bob MacKinnon, Steve Pye, David Sassani, Dave Sevougian, and Jiann Su.« less

Zonation of Microbial Communities by a Hydrothermal Mound in the Atlantis II Deep (the Red Sea)

PubMed Central

Wang, Yong; Li, Jiang Tao; He, Li Sheng; Yang, Bo; Gao, Zhao Ming; Cao, Hui Luo; Batang, Zenon; Al-Suwailem, Abdulaziz; Qian, Pei-Yuan

2015-01-01

In deep-sea geothermal rift zones, the dispersal of hydrothermal fluids of moderately-high temperatures typically forms subseafloor mounds. Major mineral components of the crust covering the mound are barite and metal sulfides. As a result of the continental rifting along the Red Sea, metalliferous sediments accumulate on the seafloor of the Atlantis II Deep. In the present study, a barite crust was identified in a sediment core from the Atlantis II Deep, indicating the formation of a hydrothermal mound at the sampling site. Here, we examined how such a dense barite crust could affect the local environment and the distribution of microbial inhabitants. Our results demonstrate distinctive features of mineral components and microbial communities in the sediment layers separated by the barite crust. Within the mound, archaea accounted for 65% of the community. In contrast, the sediments above the barite boundary were overwhelmed by bacteria. The composition of microbial communities under the mound was similar to that in the sediments of the nearby Discovery Deep and marine cold seeps. This work reveals the zonation of microbial communities after the formation of the hydrothermal mound in the subsurface sediments of the rift basin. PMID:26485717

Cerebellar malformations alter regional cerebral development.

PubMed

Bolduc, Marie-Eve; Du Plessis, Adre J; Evans, Alan; Guizard, Nicolas; Zhang, Xun; Robertson, Richard L; Limperopoulos, Catherine

2011-12-01

The aim of this study was to compare total and regional cerebral volumes in children with isolated cerebellar malformations (CBMs) with those in typically developing children, and to examine the extent to which cerebellar volumetric reductions are associated with total and regional cerebral volumes. This is a case-control study of children diagnosed with isolated CBMs. Each child was matched on age and sex to two typically developing children. Using advanced three-dimensional volumetric magnetic resonance imaging, the cerebrum was segmented into tissue classes and partitioned into eight regions. Analysis of variance was used to compare cerebral volumes between children with CBMs and control children, and linear regressions to examine the impact of cerebellar volume reduction on cerebral volumes. Magnetic resonance imaging was performed at a mean age of 27 months in 20 children (10 males, 10 females) with CBMs and 40 typically developing children. Children with CBMs showed significantly smaller deep grey matter nuclei (p < 0.001), subgenual white matter (p = 0.03), midtemporal white matter (p = 0.02), and inferior occipital grey matter (p = 0.03) volumes than typically developing children. Greater cerebellar volumetric reduction in children with CBMs was associated with decreased total cerebral volume and deep grey matter nuclei (p = 0.02), subgenual white/grey matter (p = 0.001), midtemporal white (p = 0.02) and grey matter (p = 0.01), and parieto-occipital grey matter (p = 0.004). CBMs are associated with impaired regional cerebral growth, suggesting deactivation of principal cerebello-cerebral pathways. © The Authors. Developmental Medicine & Child Neurology © 2011 Mac Keith Press.

Biology a la mode: Charles Darwin's aesthetics of "ornament".

PubMed

Menninghaus, Winfried

2009-01-01

Historians have long noted the importance of Victorian culture for the emergence of Darwin's ideas. This paper takes this understanding one step further by illustrating a deep cultural analysis for the underlying aesthetics framework which, on the one hand, is part of Darwin's notion of sexual selection while, at the same time, serving to give rise to a new "aesthetics semantics." While evolutionary biology avoids this language, it nevertheless had far-reaching influences in the decades following the publication of Darwin's work. Additionally, evolutionary aesthetics from Darwin provides unique insights on the philosophical foundations it draws upon.

Heated Hydro-Mechanical Deep Drawing of Magnesium Sheet Metal

NASA Astrophysics Data System (ADS)

Kurz, Gerrit

In order to reduce fuel consumption efforts have been made to decrease the weight of automobile constructions by increasing the use of lightweight materials. In this field of application magnesium alloys are important because of their low density. A promising alternative to large surfaced and thin die casting parts has been found in construction parts that are manufactured by sheet metal forming of magnesium. Magnesium alloys show a limited formability at room temperature. A considerable improvement of formability can be achieved by heating the material. Formability increases above a temperature of approximately T = 225 °C.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The 21st Century Power Partnership's program in Mexico (21CPP Mexico) is one initiative of the Clean Energy Ministerial, carried out in cooperation with government and local stakeholders, drawing upon an international community of power system expertise. The overall goal of this program is to support Mexico's power system transformation by accelerating the transition to a reliable, financially robust, and low-carbon system. 21CPP Mexico activities focus on achieving positive outcomes for all participants, especially addressing critical questions and challenges facing policymakers, regulators, and system operators. In support of this goal, 21CPP Mexico taps into deep networks of expertise and professional connections.

Nonlinear friction model for servo press simulation

NASA Astrophysics Data System (ADS)

Ma, Ninshu; Sugitomo, Nobuhiko; Kyuno, Takunori; Tamura, Shintaro; Naka, Tetsuo

2013-12-01

The friction coefficient was measured under an idealized condition for a pulse servo motion. The measured friction coefficient and its changing with both sliding distance and a pulse motion showed that the friction resistance can be reduced due to the re-lubrication during unloading process of the pulse servo motion. Based on the measured friction coefficient and its changes with sliding distance and re-lubrication of oil, a nonlinear friction model was developed. Using the newly developed the nonlinear friction model, a deep draw simulation was performed and the formability was evaluated. The results were compared with experimental ones and the effectiveness was verified.

Influence of the forming process on the mechanical behavior of a commingled carbon PPS composite part

NASA Astrophysics Data System (ADS)

Patou, J.; De Luycker, E.; Bonnaire, R.; Cutard, T.; Bernhart, G.

2018-05-01

In this research work, the influence of the forming process on commingled thermoplastic composite parts mechanical behavior was investigated. The aim of this work is to evaluate the influence of fabric shearing on the mechanical response of composite laminate. Different sheets with a given shear angle are manufactured. Tensile experimental results are compared with the properties obtained from a simple model based on the laminate plate theory for various off angles. Later, the link with a tetrahedron shape 3D part manufactured by punch deep drawing will be made.

Method of sealing

DOEpatents

Groh, Edward F.; Cassidy, Dale A.

1978-01-01

A thermocouple lead or other small diameter wire, cable or tube is passed through a thin material such as sheet metal and sealed thereinto by drawing complementary longitudinally angled, laterally rounded grooves terminating at their base ends in a common plane in both sides of the thin material with shearing occuring at the deep end faces thereof to form a rounded opening in the thin material substantially perpendicular to the plane of the thin material, passing a thermocouple lead or similar object through the opening so formed and sealing the opening with a sealant which simultaneously bonds the lead to the thin material.

A high quantum yield molecule-protein complex fluorophore for near-infrared II imaging

PubMed Central

Antaris, Alexander L.; Chen, Hao; Diao, Shuo; Ma, Zhuoran; Zhang, Zhe; Zhu, Shoujun; Wang, Joy; Lozano, Alexander X.; Fan, Quli; Chew, Leila; Zhu, Mark; Cheng, Kai; Hong, Xuechuan; Dai, Hongjie; Cheng, Zhen

2017-01-01

Fluorescence imaging in the second near-infrared window (NIR-II) allows visualization of deep anatomical features with an unprecedented degree of clarity. NIR-II fluorophores draw from a broad spectrum of materials spanning semiconducting nanomaterials to organic molecular dyes, yet unfortunately all water-soluble organic molecules with >1,000 nm emission suffer from low quantum yields that have limited temporal resolution and penetration depth. Here, we report tailoring the supramolecular assemblies of protein complexes with a sulfonated NIR-II organic dye (CH-4T) to produce a brilliant 110-fold increase in fluorescence, resulting in the highest quantum yield molecular fluorophore thus far. The bright molecular complex allowed for the fastest video-rate imaging in the second NIR window with ∼50-fold reduced exposure times at a fast 50 frames-per-second (FPS) capable of resolving mouse cardiac cycles. In addition, we demonstrate that the NIR-II molecular complexes are superior to clinically approved ICG for lymph node imaging deep within the mouse body. PMID:28524850

AISI/DOE Technology Roadmap Program: Cold Work Embrittlement of Interstitial Free Steel

DOE Office of Scientific and Technical Information (OSTI.GOV)

John T Bowker; Pierre Martin

2002-10-31

This work addresses the issues of measurement of secondary cold work embrittlement (SCWE) of an IF steel in deep-drawn parts using laboratory tests, and its correlation with real part fracture. It aimed at evaluating the influence of the steel chemistry and processing condition, microstructure, and test conditions, on SCWE as well as the effect of SCWE on fatigue properties. Size 6-in. cups produced with various draw ratios or trimmed at different heights were tested to determine the ductile-to-brittle-transition temperature (DBTT) as a function of strain. The 2-in. cup/expansion test, bend test and fracture of notched specimens were also used tomore » generate information complementary to that provided by the 6-inch cup/expansion test. The relationship between laboratory tests and fracture in real parts was established by testing large-scale parts. The fatigue behavior was investigated in the as-rolled and deep drawn (high stain) conditions, using prestrained specimens taken from the wall of a formed part.« less

A high quantum yield molecule-protein complex fluorophore for near-infrared II imaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Antaris, Alexander L.; Chen, Hao; Diao, Shuo

Fluorescence imaging in the second near-infrared window (NIR-II) allows visualization of deep anatomical features with an unprecedented degree of clarity. NIR-II fluorophores draw from a broad spectrum of materials spanning semiconducting nanomaterials to organic molecular dyes, yet unfortunately all water-soluble organic molecules with 41,000 nm emission suffer from low quantum yields that have limited temporal resolution and penetration depth. We report tailoring the supramolecular assemblies of protein complexes with a sulfonated NIR-II organic dye (CH-4T) to produce a brilliant 110-fold increase in fluorescence, resulting in the highest quantum yield molecular fluorophore thus far. The bright molecular complex allowed for themore » fastest video-rate imaging in the second NIR window with B50-fold reduced exposure times at a fast 50 frames-per-second (FPS) capable of resolving mouse cardiac cycles. Additionally, we demonstrate that the NIR-II molecular complexes are superior to clinically approved ICG for lymph node imaging deep within the mouse body.« less

A high quantum yield molecule-protein complex fluorophore for near-infrared II imaging

DOE PAGES

Antaris, Alexander L.; Chen, Hao; Diao, Shuo; ...

2017-05-19

Fluorescence imaging in the second near-infrared window (NIR-II) allows visualization of deep anatomical features with an unprecedented degree of clarity. NIR-II fluorophores draw from a broad spectrum of materials spanning semiconducting nanomaterials to organic molecular dyes, yet unfortunately all water-soluble organic molecules with 41,000 nm emission suffer from low quantum yields that have limited temporal resolution and penetration depth. We report tailoring the supramolecular assemblies of protein complexes with a sulfonated NIR-II organic dye (CH-4T) to produce a brilliant 110-fold increase in fluorescence, resulting in the highest quantum yield molecular fluorophore thus far. The bright molecular complex allowed for themore » fastest video-rate imaging in the second NIR window with B50-fold reduced exposure times at a fast 50 frames-per-second (FPS) capable of resolving mouse cardiac cycles. Additionally, we demonstrate that the NIR-II molecular complexes are superior to clinically approved ICG for lymph node imaging deep within the mouse body.« less

Deep Crustal Melting and the Survival of Continental Crust

NASA Astrophysics Data System (ADS)

Whitney, D.; Teyssier, C. P.; Rey, P. F.; Korchinski, M.

2017-12-01

Plate convergence involving continental lithosphere leads to crustal melting, which ultimately stabilizes the crust because it drives rapid upward flow of hot deep crust, followed by rapid cooling at shallow levels. Collision drives partial melting during crustal thickening (at 40-75 km) and/or continental subduction (at 75-100 km). These depths are not typically exceeded by crustal rocks that are exhumed in each setting because partial melting significantly decreases viscosity, facilitating upward flow of deep crust. Results from numerical models and nature indicate that deep crust moves laterally and then vertically, crystallizing at depths as shallow as 2 km. Deep crust flows en masse, without significant segregation of melt into magmatic bodies, over 10s of kms of vertical transport. This is a major mechanism by which deep crust is exhumed and is therefore a significant process of heat and mass transfer in continental evolution. The result of vertical flow of deep, partially molten crust is a migmatite dome. When lithosphere is under extension or transtension, the deep crust is solicited by faulting of the brittle upper crust, and the flow of deep crust in migmatite domes traverses nearly the entire thickness of orogenic crust in <10 million years. This cycle of burial, partial melting, rapid ascent, and crystallization/cooling preserves the continents from being recycled into the mantle by convergent tectonic processes over geologic time. Migmatite domes commonly preserve a record of high-T - low-P metamorphism. Domes may also contain rocks or minerals that record high-T - high-P conditions, including high-P metamorphism broadly coeval with host migmatite, evidence for the deep crustal origin of migmatite. There exists a spectrum of domes, from entirely deep-sourced to mixtures of deep and shallow sources. Controlling factors in deep vs. shallow sources are relative densities of crustal layers and rate of extension: fast extension (cm/yr) promotes efficient ascent of deep crust, whereas slow extension (mm/yr) produces significantly less exhumation. Recognition of the importance of migmatite (gneiss) domes as archives of orogenic deep crust is applicable to determining the chemical and physical properties of continental crust, as well as mechanisms and timescales of crustal differentiation.

Characterization of interactions between sub-surface compartments and a deep sub-vertical aquifer in crystalline basement (St-Brice en Coglès, French Brittany)

NASA Astrophysics Data System (ADS)

Roques, C.; Bour, O.; Aquilina, L.; Longuevergne, L.; Dewandel, B.; Hochreutener, R.; Schroetter, J.; Labasque, T.; Lavenant, N.

2012-12-01

Hard-rock aquifers constitute in general a limited groundwater resource whose upper part is particularly sensitive to anthropogenic activities. Locally, some high production aquifers can be encountered, typically near regional tectonic discontinuities which may constitute preferential flow paths. However, this kind of aquifer, in particular their interactions with sub-surface, is often very difficult to characterize. We investigated the hydrogeological functioning of a deep vertical conductive fractured zone, focusing on the interactions between hydrologic compartments, thanks to a multidisciplinary approach and a variety of field experiments. A specific field site located in north east of French Brittany, in crystalline bedrock, was selected because of high measured yields during drilling (100 m3/h), essentially related to permeable fractures at 120 m depth and deeper. Three deep boreholes 80 to 250 deep were drilled at relatively short distances (typically 30 meters); one of them has been cored for detailed geological information. Shallower boreholes were also drilled (7 to 20 m deep) to characterize the upper weathered compartment and the hydraulic connections with the deep compartment. The system was characterized both in natural conditions and during a 9-week large scale pumping test carried out at a pumping rate of 45 m3/h. To describe the hydraulic properties and the functioning of the deep hydraulic structure, we used a multidisciplinary approach: (a) well head variations and traditional pumping test interpretations, (b) high-resolution flow loggings to identify fracture connectivity, (c) tracer tests to estimate transfer times and groundwater fluxes between main compartments and (d) multi-parameters fluid logging, geochemistry and groundwater dating to identify water origin and mixing processes between different reservoirs. The geometry of the main permeable structure has been identified combining geological information and hydraulic interpretations. It shows a clear compartmentalization of the aquifer with a strong spatial heterogeneity in permeability. Although using a packer to force the pumping to be deeper than 80 meters, a very fast reaction of the upper aquifer during pumping with clear leaky effects was observed. Heat-Pulse Flowmeter logs also show the interconnections between compartments. During the pumping, we also monitored a high decrease of groundwater ages of the water pumped. Combination of all these methods allowed the flow connections between compartments to be identified and the fluxes between the different compartments to be quantified. We show in particular how the deep groundwater resource is strongly dependent of shallower compartments. Identifying flow properties and origin of water in a deep aquifer is an important issue to optimize the management of such groundwater resources. In particular the estimation of the groundwater capacity, and also to predict groundwater quality changes are essential. This study allows quantifying fluxes between compartments both in natural and pumping conditions. Such a characterization is crucial to assess the sustainability of deep hard-rock aquifers for groundwater supply.

Helicopter human factors

NASA Technical Reports Server (NTRS)

Hart, Sandra G.

1988-01-01

The state-of-the-art helicopter and its pilot are examined using the tools of human-factors analysis. The significant role of human error in helicopter accidents is discussed; the history of human-factors research on helicopters is briefly traced; the typical flight tasks are described; and the noise, vibration, and temperature conditions typical of modern military helicopters are characterized. Also considered are helicopter controls, cockpit instruments and displays, and the impact of cockpit design on pilot workload. Particular attention is given to possible advanced-technology improvements, such as control stabilization and augmentation, FBW and fly-by-light systems, multifunction displays, night-vision goggles, pilot night-vision systems, night-vision displays with superimposed symbols, target acquisition and designation systems, and aural displays. Diagrams, drawings, and photographs are provided.

Do Gender-Specific and High-Resolution Three Dimensional Body Charts Facilitate the Communication of Pain for Women? A Quantitative and Qualitative Study

PubMed Central

Egsgaard, Line Lindhardt

2016-01-01

Background Chronic pain is more prevalent among women; however, the majority of standardized pain drawings are often collected using male-like androgynous body representations. Objective The purpose of this study was to assess whether gender-specific and high-resolution three-dimensional (3D) body charts facilitate the communication of pain for women. Methods Using mixed-methods and a cross-over design, female patients with chronic pain were asked to provide detailed drawings of their current pain on masculine and feminine two-dimensional (2D) body schemas (N=41, Part I) or on female 2D and 3D high-resolution body schemas (N=41, Part II) on a computer tablet. The consistency of the drawings between body charts were assessed by intraclass correlation coefficient (ICC) and Bland-Altman plots. Semistructured interviews and a preference questionnaire were then used to obtain qualitative and quantitative responses of the drawing experience. Results The consistency between body charts were high (Part I: ICC=0.980, Part II: ICC=0.994). The preference ratio for the masculine to feminine body schemas were 6:35 and 18:23 for the 2D to 3D female body charts. Patients reported that the 3D body chart enabled a more accurate expression of their pain due to the detailed contours of the musculature and bone structure, however, patients also reported the 3D body chart was too human and believed that skin-like appearance limited ‘deep pain’ expressions. Conclusions Providing gender-specific body charts may facilitate the communication of pain and the level of detail (2D vs 3D body charts) should be used according to patients’ needs. PMID:27440737

Through the eyes of children: Drawings as an evaluation tool for children's understanding about endangered Mexican primates.

PubMed

Franquesa-Soler, Montserrat; Serio-Silva, Juan Carlos

2017-12-01

This study seeks to understand children's perceptions and knowledge of endangered Mexican primates. The black howler monkey (Alouatta pigra) is a charismatic species endemic to Southern Mexico, Northern Belize, and Guatemala and is a symbol of the region that fosters a sense of local pride. Therefore, it can be considered a flagship species for the forests of Southern Mexico. We evaluated the perception and knowledge that 297 Mexican elementary school children (8-10 years old) have about black howler monkeys. Specifically, we analyzed and categorized drawings made by these children based on gender, geographic context (rural or urban), and residence within or outside of Protected Areas (PAs). Student drawings were categorized into three levels of knowledge (no familiarity, basic knowledge, and sophisticated knowledge). Common misconceptions and important landscape elements for black howler conservation were gathered from these visual representations. Children were largely unfamiliar with black howlers, despite sharing the same geographical location. Knowledge was affected by context and residence, with students living within PAs more aware of black howlers than students living outside of PAs. However, overall the children showed a deep understanding of the current forest conservation situation in Southern Mexico; meaning they could be presenting a shifting baseline syndrome. The study highlights the value of assessing children's drawings as a tool that can be used to help policy makers and educational practitioners in fine-tuning educational, environmental, and marketing programs. More importantly, it is a methodology that can be applied in future research for understanding children's perceptions and knowledge about endangered species and environmental change in deciding how to improve the effectiveness of conservation messaging. © 2017 Wiley Periodicals, Inc.

[About a fortuitous representation of a case of intestinal malrotation by Wilhem His (1880)].

PubMed

Louryan, S

2011-06-01

In a textbook published in 1882, His exhibits drawings devoted to intestine development. The last figure depicts a typical case of gut malrotation, but there is no comment about this in the text. It could be possible that this omission should be due to the fact that mechanisms of gut development were not totally elucidated at this time. Copyright © 2011 Elsevier Masson SAS. All rights reserved.

Contradictory genetic make-up of Dutch harbour porpoises: Response to van der Plas-Duivesteijn et al.

NASA Astrophysics Data System (ADS)

Kopps, Anna M.; Palsbøll, Per J.

2016-02-01

The assessment of the status of endangered species or populations typically draw generously on the plethora of population genetic software available to detect population genetic structuring. However, despite the many available analytical approaches, population genetic inference methods [of neutral genetic variation] essentially capture three basic processes; migration, random genetic drift and mutation. Consequently, different analytical approaches essentially capture the same basic process, and should yield consistent results.

A deep redshift survey of field galaxies. Comments on the reality of the Butcher-Oemler effect

NASA Technical Reports Server (NTRS)

Koo, David C.; Kron, Richard G.

1987-01-01

A spectroscopic survey of over 400 field galaxies has been completed in three fields for which we have deep UBVI photographic photometry. The galaxies typically range from B=20 to 22 and possess redshifts z from 0.1 to 0.5 that are often quite spiky in distribution. Little, if any, luminosity evolution is observed up to redshifts z approx 0.5. By such redshifts, however, an unexpectedly large fraction of luminous galaxies has very blue intrinsic colors that suggest extensive star formation; in contrast, the reddest galaxies still have colors that match those of present-day ellipticals.

Deep Compaction Control of Sandy Soils

NASA Astrophysics Data System (ADS)

Bałachowski, Lech; Kurek, Norbert

2015-02-01

Vibroflotation, vibratory compaction, micro-blasting or heavy tamping are typical improvement methods for the cohesionless deposits of high thickness. The complex mechanism of deep soil compaction is related to void ratio decrease with grain rearrangements, lateral stress increase, prestressing effect of certain number of load cycles, water pressure dissipation, aging and other effects. Calibration chamber based interpretation of CPTU/DMT can be used to take into account vertical and horizontal stress and void ratio effects. Some examples of interpretation of soundings in pre-treated and compacted sands are given. Some acceptance criteria for compaction control are discussed. The improvement factors are analysed including the normalised approach based on the soil behaviour type index.

Medium Deep High Temperature Heat Storage

NASA Astrophysics Data System (ADS)

Bär, Kristian; Rühaak, Wolfram; Schulte, Daniel; Welsch, Bastian; Chauhan, Swarup; Homuth, Sebastian; Sass, Ingo

2015-04-01

Heating of buildings requires more than 25 % of the total end energy consumption in Germany. Shallow geothermal systems for indirect use as well as shallow geothermal heat storage systems like aquifer thermal energy storage (ATES) or borehole thermal energy storage (BTES) typically provide low exergy heat. The temperature levels and ranges typically require a coupling with heat pumps. By storing hot water from solar panels or thermal power stations with temperatures of up to 110 °C a medium deep high temperature heat storage (MDHTS) can be operated on relatively high temperature levels of more than 45 °C. Storage depths of 500 m to 1,500 m below surface avoid conflicts with groundwater use for drinking water or other purposes. Permeability is typically also decreasing with greater depth; especially in the crystalline basement therefore conduction becomes the dominant heat transport process. Solar-thermal charging of a MDHTS is a very beneficial option for supplying heat in urban and rural systems. Feasibility and design criteria of different system configurations (depth, distance and number of BHE) are discussed. One system is designed to store and supply heat (300 kW) for an office building. The required boreholes are located in granodioritic bedrock. Resulting from this setup several challenges have to be addressed. The drilling and completion has to be planned carefully under consideration of the geological and tectonical situation at the specific site.

De novo transcriptome assembly and positive selection analysis of an individual deep-sea fish.

PubMed

Lan, Yi; Sun, Jin; Xu, Ting; Chen, Chong; Tian, Renmao; Qiu, Jian-Wen; Qian, Pei-Yuan

2018-05-24

High hydrostatic pressure and low temperatures make the deep sea a harsh environment for life forms. Actin organization and microtubules assembly, which are essential for intracellular transport and cell motility, can be disrupted by high hydrostatic pressure. High hydrostatic pressure can also damage DNA. Nucleic acids exposed to low temperatures can form secondary structures that hinder genetic information processing. To study how deep-sea creatures adapt to such a hostile environment, one of the most straightforward ways is to sequence and compare their genes with those of their shallow-water relatives. We captured an individual of the fish species Aldrovandia affinis, which is a typical deep-sea inhabitant, from the Okinawa Trough at a depth of 1550 m using a remotely operated vehicle (ROV). We sequenced its transcriptome and analyzed its molecular adaptation. We obtained 27,633 protein coding sequences using an Illumina platform and compared them with those of several shallow-water fish species. Analysis of 4918 single-copy orthologs identified 138 positively selected genes in A. affinis, including genes involved in microtubule regulation. Particularly, functional domains related to cold shock as well as DNA repair are exposed to positive selection pressure in both deep-sea fish and hadal amphipod. Overall, we have identified a set of positively selected genes related to cytoskeleton structures, DNA repair and genetic information processing, which shed light on molecular adaptation to the deep sea. These results suggest that amino acid substitutions of these positively selected genes may contribute crucially to the adaptation of deep-sea animals. Additionally, we provide a high-quality transcriptome of a deep-sea fish for future deep-sea studies.

Deep Defects Seen on Visual Fields Spatially Correspond Well to Loss of Retinal Nerve Fiber Layer Seen on Circumpapillary OCT Scans.

PubMed

Mavrommatis, Maria A; Wu, Zhichao; Naegele, Saskia I; Nunez, Jason; De Moraes, Carlos; Ritch, Robert; Hood, Donald C

2018-02-01

To examine the structure-function relationship in glaucoma between deep defects on visual fields (VF) and deep losses in the circumpapillary retinal nerve fiber layer (cpRNFL) on optical coherence tomography (OCT) circle scans. Thirty two glaucomatous eyes with deep VF defects, as defined by at least one test location worse than ≤ -15 dB on the 10-2 and/or 24-2 VF pattern deviation (PD) plots, were included from 87 eyes with "early" glaucoma (i.e., 24-2 mean deviation better than -6 dB). Using the location of the deep VF points and a schematic model, the location of local damage on an OCT circle scan was predicted. The thinnest location of cpRNFL (i.e., deepest loss) was also determined. In 19 of 32 eyes, a region of complete or near complete cpRNFL loss was observed. All 19 of these had deep VF defects on the 24-2 and/or 10-2. All of the 32 eyes with deep VF defects had abnormal cpRNFL regions (red, 1%) and all but 2 had a region of cpRNFL thickness <21 μm. The midpoint of the VF defect and the location of deepest cpRNFL had a 95% limit of agreement within approximately two-thirds of a clock-hour (or 30°) sector (between -22.1° to 25.2°). Individual fovea-to-disc angle (FtoDa) adjustment improved agreement in one eye with an extreme FtoDa. Although studies relating local structural (OCT) and functional (VF) measures typically show poor to moderate correlations, there is good qualitative agreement between the location of deep cpRNFL loss and deep defects on VFs.

Condition and biochemical profile of blue mussels (Mytilus edulis L.) cultured at different depths in a cold water coastal environment

NASA Astrophysics Data System (ADS)

Gallardi, Daria; Mills, Terry; Donnet, Sebastien; Parrish, Christopher C.; Murray, Harry M.

2017-08-01

The growth and health of cultured blue mussels (Mytilus edulis) are affected by environmental conditions. Typically, culture sites are situated in sheltered areas near shore (i.e., < 1 km distance from land, < 20 m depth); however, land runoff, user conflicts and environmental impact in coastal areas are concerns and interest in developing deep water (> 20 m depth) mussel culture has been growing. This study evaluated the effect of culture depth on blue mussels in a cold water coastal environment (Newfoundland, Canada). Culture depth was examined over two years from September 2012 to September 2014; mussels from three shallow water (5 m) and three deep water (15 m) sites were compared for growth and biochemical composition; culture depths were compared for temperature and chlorophyll a. Differences between the two years examined were noted, possibly due to harsh winter conditions in the second year of the experiment. In both years shallow and deep water mussels presented similar condition; in year 2 deep water mussels had a significantly better biochemical profile. Lipid and glycogen analyses showed seasonal variations, but no significant differences between shallow and deep water were noted. Fatty acid profiles showed a significantly higher content of omega-3 s (20:5ω3; EPA) and lower content of bacterial fatty acids in deep water sites in year 2. Everything considered, deep water appeared to provide a more favorable environment for mussel growth than shallow water under harsher weather conditions.

A Deep Learning Approach to on-Node Sensor Data Analytics for Mobile or Wearable Devices.

PubMed

Ravi, Daniele; Wong, Charence; Lo, Benny; Yang, Guang-Zhong

2017-01-01

The increasing popularity of wearable devices in recent years means that a diverse range of physiological and functional data can now be captured continuously for applications in sports, wellbeing, and healthcare. This wealth of information requires efficient methods of classification and analysis where deep learning is a promising technique for large-scale data analytics. While deep learning has been successful in implementations that utilize high-performance computing platforms, its use on low-power wearable devices is limited by resource constraints. In this paper, we propose a deep learning methodology, which combines features learned from inertial sensor data together with complementary information from a set of shallow features to enable accurate and real-time activity classification. The design of this combined method aims to overcome some of the limitations present in a typical deep learning framework where on-node computation is required. To optimize the proposed method for real-time on-node computation, spectral domain preprocessing is used before the data are passed onto the deep learning framework. The classification accuracy of our proposed deep learning approach is evaluated against state-of-the-art methods using both laboratory and real world activity datasets. Our results show the validity of the approach on different human activity datasets, outperforming other methods, including the two methods used within our combined pipeline. We also demonstrate that the computation times for the proposed method are consistent with the constraints of real-time on-node processing on smartphones and a wearable sensor platform.

Synthesis of photobleachable deep UV resists based on single component nonchemically amplified resist system

NASA Astrophysics Data System (ADS)

Kim, Kyoung-Seon; Kim, Su-Min; Park, Ji-Young; Kim, Jin-Baek

2006-03-01

In a general way, non-CARs consist of the matrix resins and photoactive compounds (PACs), and the dissolution properties of the resists are dependent on the amount of PACs. In common, I-line and G-line resists based on novolac and diazonaphthoquinone (DNQ) are typical non-CARs. But most PACs absorb much light in the deep UV, and they are poorly photobleached by deep UV exposure. This strong absorption of PACs prevents the deep UV light from reaching the bottom of the resist film, leading to scum and sloped pattern profiles. Several PACs which contain diazoketo groups have been reported for deep UV lithography. Our goal in this investigation is to find a proper resist that is processable without photoacid generator and induces both photobleaching in the deep UV regions and polarity change upon exposure. We thought diazoketo groups attached to the polymer side chains could give such effects. There is no necessity for the post-exposure bake step that is the cause of acid-diffusion. The diazoketo groups undergo the Wolff rearrangement upon irradiation in the deep UV, affording ketenes that react with water to provide base soluble photoproducts. The polymers were synthesized by radical copolymerization of 2-(2-diazo-3-oxo-butyryloxy)-ethyl methacrylate, 2-hydroxyethyl methacrylate, and γ-butyrolacton-2-yl methacrylate. The single component resist showed 0.7μm line and space patterns using a mercury-xenon lamp in a contact printing mode.

Semantic Elements in Deep Structures as Seen from a Modernist Definition of Clarity.

ERIC Educational Resources Information Center

Lemke, Alan

Typically, teachers approach ambiguity in student writing by suggesting that students focus on diction, syntax, and writing format; however, the works of modernists (including T.S. Eliot, Ludwig Wittgenstein, Karl Marx, and Pablo Picasso) suggest the importance of conceptions of semantic clarity. Transformational models for syntactic elements in…

Transforming an MFT Program: A Model for Enhancing Diversity

ERIC Educational Resources Information Center

McDowell, Teresa; Fang, Shi-Ruei; Brownlee, Kenya; Young, Cecilia Gomez; Khanna, Anchal

2002-01-01

Marriage and family therapy programs need to go beyond the typical practices of recruiting and retaining students of color. Marriage and family therapy educators must assume positions of leadership by transforming graduate programs to reflect a deep, active, systemic commitment to both diversity and social justice. In this article, we argue that…

Canister Design for Deep Borehole Disposal of Nuclear Waste

DTIC Science & Technology

2006-05-01

radioactive waste disposal (not yet released) Fortunately, transportation casks for spent fuel have already been approved, built, and used as...would allow use of the current designs for transportation casks ; or, place the fuel assemblies into the final disposal canisters 21 prior to transport ...16 Figure 1-5. Typical Spent Fuel Transportation Casks

76 FR 34656 - Taking and Importing Marine Mammals; Geological and Geophysical Exploration of Mineral and Energy...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-14

..., but not limited to, migration, breathing, nursing, breeding, feeding, or sheltering (Level B... surveys [WAZ]), and ocean bottom surveys [OBS], and (2) high resolution surveys. Deep Seismic Surveys For... seismic surveys (2D, 3D, or WAZ) are typically deeper penetrating than high resolution surveys and may...

Entrapment Neuropathies of the Foot and Ankle.

PubMed

Ferkel, Eric; Davis, William Hodges; Ellington, John Kent

2015-10-01

Posterior tarsal tunnel syndrome is the result of compression of the posterior tibial nerve. Anterior tarsal tunnel syndrome (entrapment of the deep peroneal nerve) typically presents with pain radiating to the first dorsal web space. Distal tarsal tunnel syndrome results from entrapment of the first branch of the lateral plantar nerve and is often misdiagnosed initially as plantar fasciitis. Medial plantar nerve compression is seen most often in running athletes, typically with pain radiating to the medial arch. Morton neuroma is often seen in athletes who place their metatarsal arches repetitively in excessive hyperextension. Copyright © 2015 Elsevier Inc. All rights reserved.

Methane oxidation in Saanich Inlet during summer stratification

NASA Technical Reports Server (NTRS)

Ward, B. B.; Kilpatrick, K. A.; Wopat, A. E.; Minnich, E. C.; Lidstrom, M. E.

1989-01-01

Saanich Inlet, British Columbia, an fjord on the southeast coast of Vancouver Island, typically stratifies in summer, leading to the formation of an oxic-anoxic interface in the water column and accumulation of methane in the deep water. The results of methane concentration measurements in the water column of the inlet at various times throughout the summer months in 1983 are presented. Methane gradients and calculated diffusive fluxes across the oxic-anoxic interface increased as the summer progressed. Methane distribution and consumption in Saanich Inlet were studied in more detail during August 1986. At this time, a typical summer stratification with an oxic-anoxic interface around 140 m was present. At the interface, steep gradients in nutrient concentrations, bacterial abundance and methane concentration were observed. Methane oxidation was detected in the aerobic surface waters and in the anaerobic deep layer, but highest rates occurred in a narrow layer at the oxic-anoxic interface. Estimated methane oxidation rates were suffcient to consume 100 percent of the methane provided by diffusive flux from the anoxic layer. Methane oxidation is thus a mechanism whereby atmospheric flux from anoxic waters is minimized.

Core strength training for patients with chronic low back pain.

PubMed

Chang, Wen-Dien; Lin, Hung-Yu; Lai, Ping-Tung

2015-03-01

[Purpose] Through core strength training, patients with chronic low back pain can strengthen their deep trunk muscles. However, independent training remains challenging, despite the existence of numerous core strength training strategies. Currently, no standardized system has been established analyzing and comparing the results of core strength training and typical resistance training. Therefore, we conducted a systematic review of the results of previous studies to explore the effectiveness of various core strength training strategies for patients with chronic low back pain. [Methods] We searched for relevant studies using electronic databases. Subsequently, we evaluated their quality by analyzing the reported data. [Results] We compared four methods of evaluating core strength training: trunk balance, stabilization, segmental stabilization, and motor control exercises. According to the results of various scales and evaluation instruments, core strength training is more effective than typical resistance training for alleviating chronic low back pain. [Conclusion] All of the core strength training strategies examined in this study assist in the alleviation of chronic low back pain; however, we recommend focusing on training the deep trunk muscles to alleviate chronic low back pain.

Energy levels distribution in supersaturated silicon with titanium for photovoltaic applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pérez, E., E-mail: eduper@ele.uva.es; Castán, H.; García, H.

2015-01-12

In the attempt to form an intermediate band in the bandgap of silicon substrates to give it the capability to absorb infrared radiation, we studied the deep levels in supersaturated silicon with titanium. The technique used to characterize the energy levels was the thermal admittance spectroscopy. Our experimental results showed that in samples with titanium concentration just under Mott limit there was a relationship among the activation energy value and the capture cross section value. This relationship obeys to the well known Meyer-Neldel rule, which typically appears in processes involving multiple excitations, like carrier capture/emission in deep levels, and itmore » is generally observed in disordered systems. The obtained characteristic Meyer-Neldel parameters were Tmn = 176 K and kTmn = 15 meV. The energy value could be associated to the typical energy of the phonons in the substrate. The almost perfect adjust of all experimental data to the same straight line provides further evidence of the validity of the Meyer Neldel rule, and may contribute to obtain a deeper insight on the ultimate meaning of this phenomenon.« less

Picocyanobacteria and deep-ocean fluorescent dissolved organic matter share similar optical properties

NASA Astrophysics Data System (ADS)

Zhao, Zhao; Gonsior, Michael; Luek, Jenna; Timko, Stephen; Ianiri, Hope; Hertkorn, Norbert; Schmitt-Kopplin, Philippe; Fang, Xiaoting; Zeng, Qinglu; Jiao, Nianzhi; Chen, Feng

2017-05-01

Marine chromophoric dissolved organic matter (CDOM) and its related fluorescent components (FDOM), which are widely distributed but highly photobleached in the surface ocean, are critical in regulating light attenuation in the ocean. However, the origins of marine FDOM are still under investigation. Here we show that cultured picocyanobacteria, Synechococcus and Prochlorococcus, release FDOM that closely match the typical fluorescent signals found in oceanic environments. Picocyanobacterial FDOM also shows comparable apparent fluorescent quantum yields and undergoes similar photo-degradation behaviour when compared with deep-ocean FDOM, further strengthening the similarity between them. Ultrahigh-resolution mass spectrometry (MS) and nuclear magnetic resonance spectroscopy reveal abundant nitrogen-containing compounds in Synechococcus DOM, which may originate from degradation products of the fluorescent phycobilin pigments. Given the importance of picocyanobacteria in the global carbon cycle, our results indicate that picocyanobacteria are likely to be important sources of marine autochthonous FDOM, which may accumulate in the deep ocean.

The Key Factors Analysis of Palisades Temperature in Deep Open-pit Mine

NASA Astrophysics Data System (ADS)

Wang, Yuan; Du, Cuifeng; Jin, Wenbo; Wang, Puyu

2018-01-01

In order to study the key factors of palisades temperature field in a deep open-pit mine in the natural environment, the influence of natural factors on the palisades temperature in a deep open-pit mine were analysed based on the principle of heat transfer. Four typical places with different ways of solar radiation were selected to carry out the field test. The results show that solar radiation, atmospheric temperature, and wind speed are three main factors affecting the temperature of palisades and that the direct sunlight plays a leading role. The time period of the sun shining directly on the shady slope of the palisades is short because of blocking effect, whose temperature changes in a smaller scale. At the same time, the sun slope of the palisades suffers from the solar radiation for a long time, whose temperature changes in a larger scale, and the variation is similar to the air temperature.

Deep sleep divides the cortex into opposite modes of anatomical-functional coupling.

PubMed

Tagliazucchi, Enzo; Crossley, Nicolas; Bullmore, Edward T; Laufs, Helmut

2016-11-01

The coupling of anatomical and functional connectivity at rest suggests that anatomy is essential for wake-typical activity patterns. Here, we study the development of this coupling from wakefulness to deep sleep. Globally, similarity between whole-brain anatomical and functional connectivity networks increased during deep sleep. Regionally, we found differential coupling: during sleep, functional connectivity of primary cortices resembled more the underlying anatomical connectivity, while we observed the opposite in associative cortices. Increased anatomical-functional similarity in sensory areas is consistent with their stereotypical, cross-modal response to the environment during sleep. In distinction, looser coupling-relative to wakeful rest-in higher order integrative cortices suggests that sleep actively disrupts default patterns of functional connectivity in regions essential for the conscious access of information and that anatomical connectivity acts as an anchor for the restoration of their functionality upon awakening.

Stellar Atmospheric Parameterization Based on Deep Learning

NASA Astrophysics Data System (ADS)

Pan, R. Y.; Li, X. R.

2016-07-01

Deep learning is a typical learning method widely studied in machine learning, pattern recognition, and artificial intelligence. This work investigates the stellar atmospheric parameterization problem by constructing a deep neural network with five layers. The proposed scheme is evaluated on both real spectra from Sloan Digital Sky Survey (SDSS) and the theoretic spectra computed with Kurucz's New Opacity Distribution Function (NEWODF) model. On the SDSS spectra, the mean absolute errors (MAEs) are 79.95 for the effective temperature (T_{eff}/K), 0.0058 for lg (T_{eff}/K), 0.1706 for surface gravity (lg (g/(cm\\cdot s^{-2}))), and 0.1294 dex for metallicity ([Fe/H]), respectively; On the theoretic spectra, the MAEs are 15.34 for T_{eff}/K, 0.0011 for lg (T_{eff}/K), 0.0214 for lg (g/(cm\\cdot s^{-2})), and 0.0121 dex for [Fe/H], respectively.

Experimental Study on the Axis Line Deflection of Ti6A14V Titanium Alloy in Gun-Drilling Process

NASA Astrophysics Data System (ADS)

Li, Liang; Xue, Hu; Wu, Peng

2018-01-01

Titanium alloy is widely used in aerospace industry, but it is also a typical difficult-to-cut material. During Deep hole drilling of the shaft parts of a certain large aircraft, there are problems of bad surface roughness, chip control and axis deviation, so experiments on gun-drilling of Ti6A14V titanium alloy were carried out to measure the axis line deflection, diameter error and surface integrity, and the reasons of these errors were analyzed. Then, the optimized process parameter was obtained during gun-drilling of Ti6A14V titanium alloy with deep hole diameter of 17mm. Finally, we finished the deep hole drilling of 860mm while the comprehensive error is smaller than 0.2mm and the surface roughness is less than 1.6μm.

Comparing source-based and gist-based false recognition in aging and Alzheimer's disease.

PubMed

Pierce, Benton H; Sullivan, Alison L; Schacter, Daniel L; Budson, Andrew E

2005-07-01

This study examined 2 factors contributing to false recognition of semantic associates: errors based on confusion of source and errors based on general similarity information or gist. The authors investigated these errors in patients with Alzheimer's disease (AD), age-matched control participants, and younger adults, focusing on each group's ability to use recollection of source information to suppress false recognition. The authors used a paradigm consisting of both deep and shallow incidental encoding tasks, followed by study of a series of categorized lists in which several typical exemplars were omitted. Results showed that healthy older adults were able to use recollection from the deep processing task to some extent but less than that used by younger adults. In contrast, false recognition in AD patients actually increased following the deep processing task, suggesting that they were unable to use recollection to oppose familiarity arising from incidental presentation. (c) 2005 APA, all rights reserved.

Numerical modeling analysis of stress transfer modification concepts for deep longwall mines. Report of investigations/1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vandergrift, T.L.; Jude, C.V.

1995-12-31

This U.S. Bureau of Mines (USBM) report evaluates three stress-transfer-modification concepts for their potential in reducing longwall gate road stresses and closures. In each of the three concepts--packwalling, gob infilling, and entry filling--support structures are constructed on the headgate side of the panel parallel with or inby the face line. When the headgate becomes the tailgate of the adjacent panel, these structures are in place to accept stresses transferred from the mined-out panel. Using the USBM nonlinear boundary-element program MULSIM/NL, baseline models of typical longwall stress transfer behavior were developed for both intermediate depth and deep mining conditions. These modelsmore » were verified by comparing model results with field measurements and observations. The stress-transfer-modification concepts were then incorporated into the deep baseline model to quantify the effects of each concept on tailgate closure.« less

Electronics for Deep Space Cryogenic Applications

NASA Technical Reports Server (NTRS)

Patterson, R. L.; Hammond, A.; Dickman, J. E.; Gerber, S. S.; Elbuluk, M. E.; Overton, E.

2002-01-01

Deep space probes and planetary exploration missions require electrical power management and control systems that are capable of efficient and reliable operation in very cold temperature environments. Typically, in deep space probes, heating elements are used to keep the spacecraft electronics near room temperature. The utilization of power electronics designed for and operated at low temperature will contribute to increasing efficiency and improving reliability of space power systems. At NASA Glenn Research Center, commercial-off-the-shelf devices as well as developed components are being investigated for potential use at low temperatures. These devices include semiconductor switching devices, magnetics, and capacitors. Integrated circuits such as digital-to-analog and analog-to-digital converters, DC/DC converters, operational amplifiers, and oscillators are also being evaluated. In this paper, results will be presented for selected analog-to-digital converters, oscillators, DC/DC converters, and pulse width modulation (PWM) controllers.

Deep-water Hydrozoa (Cnidaria: Medusozoa) in the Sea of Japan, collected during the 51st Cruise of R/V Akademik M.A. Lavrentyev, with description Opercularella angelikae, sp. nov.

NASA Astrophysics Data System (ADS)

Stepanjants, Sofia D.

2013-02-01

A report is given about Hydrozoa collected at depths between 455 and 3666 m in the Sea of Japan during the Russian-German expedition on R/V Akademik M.A. Lavrentyev. Ten species were found, with four of them being typical bathyal-abyssal and abyssal zones. A new species, Opercularella angelikae, is described, and it was the dominant hydroid in samples from 970 to 3660 m. Four eurybathic species characteristics of the Sea of Japan were sampled between 455 and 582 m. Abyssal (pseudoabyssal after Andriashev, 1979) hydroid fauna in the Sea of Japan is reported. The hypothesis that an exclusively deep-water fauna is lacking in abyssal regions of the Sea of Japan is disputed. The author's personal opinion considered concerning the borders of 1000 m between shallow and deep hydrozoan species in the Sea of Japan.

Picocyanobacteria and deep-ocean fluorescent dissolved organic matter share similar optical properties

PubMed Central

Zhao, Zhao; Gonsior, Michael; Luek, Jenna; Timko, Stephen; Ianiri, Hope; Hertkorn, Norbert; Schmitt-Kopplin, Philippe; Fang, Xiaoting; Zeng, Qinglu; Jiao, Nianzhi; Chen, Feng

2017-01-01

Marine chromophoric dissolved organic matter (CDOM) and its related fluorescent components (FDOM), which are widely distributed but highly photobleached in the surface ocean, are critical in regulating light attenuation in the ocean. However, the origins of marine FDOM are still under investigation. Here we show that cultured picocyanobacteria, Synechococcus and Prochlorococcus, release FDOM that closely match the typical fluorescent signals found in oceanic environments. Picocyanobacterial FDOM also shows comparable apparent fluorescent quantum yields and undergoes similar photo-degradation behaviour when compared with deep-ocean FDOM, further strengthening the similarity between them. Ultrahigh-resolution mass spectrometry (MS) and nuclear magnetic resonance spectroscopy reveal abundant nitrogen-containing compounds in Synechococcus DOM, which may originate from degradation products of the fluorescent phycobilin pigments. Given the importance of picocyanobacteria in the global carbon cycle, our results indicate that picocyanobacteria are likely to be important sources of marine autochthonous FDOM, which may accumulate in the deep ocean. PMID:28513605

Diffusion and Interface Effects during Preparation of All-Solid Microstructured Fibers

PubMed Central

Jens, Kobelke; Jörg, Bierlich; Katrin, Wondraczek; Claudia, Aichele; Zhiwen, Pan; Sonja, Unger; Kay, Schuster; Hartmut, Bartelt

2014-01-01

All-solid microstructured optical fibers (MOF) allow the realization of very flexible optical waveguide designs. They are prepared by stacking of doped silica rods or canes in complex arrangements. Typical dopants in silica matrices are germanium and phosphorus to increase the refractive index (RI), or boron and fluorine to decrease the RI. However, the direct interface contact of stacking elements often causes interrelated chemical reactions or evaporation during thermal processing. The obtained fiber structures after the final drawing step thus tend to deviate from the targeted structure risking degrading their favored optical functionality. Dopant profiles and design parameters (e.g., the RI homogeneity of the cladding) are controlled by the combination of diffusion and equilibrium conditions of evaporation reactions. We show simulation results of diffusion and thermal dissociation in germanium and fluorine doped silica rod arrangements according to the monitored geometrical disturbances in stretched canes or drawn fibers. The paper indicates geometrical limits of dopant structures in sub-µm-level depending on the dopant concentration and the thermal conditions during the drawing process. The presented results thus enable an optimized planning of the preform parameters avoiding unwanted alterations in dopant concentration profiles or in design parameters encountered during the drawing process. PMID:28788219

Diffusion and Interface Effects during Preparation of All-Solid Microstructured Fibers.

PubMed

Jens, Kobelke; Jörg, Bierlich; Katrin, Wondraczek; Claudia, Aichele; Zhiwen, Pan; Sonja, Unger; Kay, Schuster; Hartmut, Bartelt

2014-09-25

All-solid microstructured optical fibers (MOF) allow the realization of very flexible optical waveguide designs. They are prepared by stacking of doped silica rods or canes in complex arrangements. Typical dopants in silica matrices are germanium and phosphorus to increase the refractive index (RI), or boron and fluorine to decrease the RI. However, the direct interface contact of stacking elements often causes interrelated chemical reactions or evaporation during thermal processing. The obtained fiber structures after the final drawing step thus tend to deviate from the targeted structure risking degrading their favored optical functionality. Dopant profiles and design parameters (e.g., the RI homogeneity of the cladding) are controlled by the combination of diffusion and equilibrium conditions of evaporation reactions. We show simulation results of diffusion and thermal dissociation in germanium and fluorine doped silica rod arrangements according to the monitored geometrical disturbances in stretched canes or drawn fibers. The paper indicates geometrical limits of dopant structures in sub-µm-level depending on the dopant concentration and the thermal conditions during the drawing process. The presented results thus enable an optimized planning of the preform parameters avoiding unwanted alterations in dopant concentration profiles or in design parameters encountered during the drawing process.

The Russo-Williamson Theses in the social sciences: causal inference drawing on two types of evidence.

PubMed

Claveau, François

2012-12-01

This article examines two theses formulated by Russo and Williamson (2007) in their study of causal inference in the health sciences. The two theses are assessed against evidence from a specific case in the social sciences, i.e., research on the institutional determinants of the aggregate unemployment rate. The first Russo-Williamson Thesis is that a causal claim can only be established when it is jointly supported by difference-making and mechanistic evidence. This thesis is shown not to hold. While researchers in my case study draw extensively on both types of evidence, one causal claim out of the three analyzed is established even though it is exclusively supported by mechanistic evidence. The second Russo-Williamson Thesis is that standard accounts of causality fail to handle the dualist epistemology highlighted in the first Thesis. I argue that a counterfactual-manipulationist account of causality--which is endorsed by many philosophers as well as many social scientists--can perfectly make sense of the typical strategy in my case study to draw on both difference-making and mechanistic evidence; it is just an instance of the common strategy of increasing evidential variety. Copyright © 2012 Elsevier Ltd. All rights reserved.