Computer program for the analysis of the cross flow in a radial inflow turbine scroll

NASA Technical Reports Server (NTRS)

Hamed, A.; Abdallah, S.; Tabakoff, W.

1977-01-01

A computer program was used to solve the governing of the potential flow in the cross sectional planes of a radial inflow turbine scroll. A list of the main program, the subroutines, and typical output example are included.

Special Education Research Advances Knowledge in Education

ERIC Educational Resources Information Center

Vaughn, Sharon; Swanson, Elizabeth A.

2015-01-01

Research in special education has yielded beneficial outcomes for students with disabilities as well as typical achieving students. The authors provide examples of the valuable knowledge special education research has generated, including the elements of response to intervention (e.g., screening and progress monitoring), instructional practices…

Report of the Polymer Core Course Committee: Polymer Principles for the Chemical Engineering Curriculum.

ERIC Educational Resources Information Center

Journal of Chemical Education, 1985

1985-01-01

Offers suggestions for introducing polymer topics into: (1) introductory chemical engineering; (2) transport phenomena and unit operations; (3) chemical engineering thermodynamics; and (4) reaction engineering. Also included for each area are examples of textbooks in current use and a few typical problems. (JN)

15 CFR 923.31 - Inland boundary.

Code of Federal Regulations, 2010 CFR

2010-01-01

... subject to regular inundation of tidal salt (or Great Lakes) waters which contain marsh flora typical of the region; (5) Beaches—The area affected by wave action directly from the sea. Examples are sandy... appropriate to define the coastal zone as including these watersheds. (2) Areas of tidal influence that extend...

15 CFR 923.31 - Inland boundary.

Code of Federal Regulations, 2014 CFR

2014-01-01

... subject to regular inundation of tidal salt (or Great Lakes) waters which contain marsh flora typical of the region; (5) Beaches—The area affected by wave action directly from the sea. Examples are sandy... appropriate to define the coastal zone as including these watersheds. (2) Areas of tidal influence that extend...

15 CFR 923.31 - Inland boundary.

Code of Federal Regulations, 2013 CFR

2013-01-01

... subject to regular inundation of tidal salt (or Great Lakes) waters which contain marsh flora typical of the region; (5) Beaches—The area affected by wave action directly from the sea. Examples are sandy... appropriate to define the coastal zone as including these watersheds. (2) Areas of tidal influence that extend...

15 CFR 923.31 - Inland boundary.

Code of Federal Regulations, 2012 CFR

2012-01-01

... subject to regular inundation of tidal salt (or Great Lakes) waters which contain marsh flora typical of the region; (5) Beaches—The area affected by wave action directly from the sea. Examples are sandy... appropriate to define the coastal zone as including these watersheds. (2) Areas of tidal influence that extend...

15 CFR 923.31 - Inland boundary.

Code of Federal Regulations, 2011 CFR

2011-01-01

... subject to regular inundation of tidal salt (or Great Lakes) waters which contain marsh flora typical of the region; (5) Beaches—The area affected by wave action directly from the sea. Examples are sandy... appropriate to define the coastal zone as including these watersheds. (2) Areas of tidal influence that extend...

Education for Eminence: Some Childhood Traits May Predict Adult Eminence.

ERIC Educational Resources Information Center

Walberg, Herbert J.; Wynne, Edward A.

1993-01-01

This article distills from research five childhood activities typically associated with adult eminence, including working diligently, absorbing information, engaging others constructively, choosing goals carefully, and completing difficult tasks. Examples from the lives of eminent men and women are provided, such as Jane Adams, Thomas Jefferson,…

Argumentation in History Classrooms: A Key Path to Understanding the Discipline and Preparing Citizens

ERIC Educational Resources Information Center

Monte-Sano, Chauncey

2016-01-01

Different kinds of arguments typically include claims, warrants, and evidence. However, the very nature of claims, warrants, and evidence are discipline specific. A student's essay, for example, may exhibit features of argumentation while revealing fundamental flaws in historical thinking. Stronger historical arguments exhibit historical thinking…

Uncorrelated Encounter Model of the National Airspace System, Version 2.0

DTIC Science & Technology

2013-08-19

can exist to certify avoidance systems for operational use. Evaluations typically include flight tests, operational impact studies, and simulation of...appropriate for large-scale air traffic impact studies— for example, examination of sector loading or conflict rates. The focus here includes two types of...between two IFR aircraft in oceanic airspace. The reason for this is that one cannot observe encounters of sufficient fidelity in the available data

TMF design considerations in turbine airfoils of advanced turbine engines

NASA Astrophysics Data System (ADS)

Date, C. G.; Zamrik, S. Y.; Adams, J. H.; Frani, N. E.

A review of thermal-mechanicalfatigue (TMF) in advanced turbine engines is presented. The review includes examples of typical thermal-mechnical loadings encountered in the design of hot section blades and vanes. Specific issues related to TMF behavior are presented and the associated impact on component life analysis and design is discussed.

A Picture's Worth: PECS and Other Visual Communication Strategies in Autism. Topics in Autism.

ERIC Educational Resources Information Center

Bondy, Andy; Frost, Lori

This book is intended to help parents and professionals understand the communication difficulties of children and adults who do not speak, including those with autism spectrum disorders. The first four chapters describe typical characteristics of nonverbal individuals and offer examples of the authors' approach to communication and the…

Three Examples of Kinesiology in Physical Education: Why, How, and for Whom?

ERIC Educational Resources Information Center

Locke, Lawrence F.

2008-01-01

This article examines three distinctly different approaches to the task of helping public school teachers inject conceptual content into their physical education lessons. The first strategy is the production of a textbook prepared by one or several individuals. Such books typically espouse the desirability of including conceptual content, describe…

Erosion in radial inflow turbines. Volume 5: Computer programs for tracing particle trajectories

NASA Technical Reports Server (NTRS)

Clevenger, W. B., Jr.; Tabakoff, W.

1975-01-01

Computer programs used to study the trajectories of particles in the radial inflow turbines are presented. The general technique of each program is described. A set of subroutines developed during the study are described. Descriptions, listings, and typical examples of each of the main programs are included.

The MSFC complementary metal oxide semiconductor (including multilevel interconnect metallization) process handbook

NASA Technical Reports Server (NTRS)

Bouldin, D. L.; Eastes, R. W.; Feltner, W. R.; Hollis, B. R.; Routh, D. E.

1979-01-01

The fabrication techniques for creation of complementary metal oxide semiconductor integrated circuits at George C. Marshall Space Flight Center are described. Examples of C-MOS integrated circuits manufactured at MSFC are presented with functional descriptions of each. Typical electrical characteristics of both p-channel metal oxide semiconductor and n-channel metal oxide semiconductor discrete devices under given conditions are provided. Procedures design, mask making, packaging, and testing are included.

How Knowledge Organisations Work: The Case of Software Firms

ERIC Educational Resources Information Center

Gottschalk, Petter

2007-01-01

Knowledge workers in software firms solve client problems in sequential and cyclical work processes. Sequential and cyclical work takes place in the value configuration of a value shop. While typical examples of value chains are manufacturing industries such as paper and car production, typical examples of value shops are law firms and medical…

Net Operating Working Capital, Capital Budgeting, and Cash Budgets: A Teaching Example

ERIC Educational Resources Information Center

Tuner, James A.

2016-01-01

Many introductory finance texts present information on the capital budgeting process, including estimation of project cash flows. Typically, estimation of project cash flows begins with a calculation of net income. Getting from net income to cash flows requires accounting for non-cash items such as depreciation. Also important is the effect of…

Spin dynamics in storage rings and linear accelerators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Irwin, J.

1994-12-01

The purpose of these lectures is to survey the subject of spin dynamics in accelerators: to give a sense of the underlying physics, the typical analytic and numeric methods used, and an overview of results achieved. Consideration will be limited to electrons and protons. Examples of experimental and theoretical results in both linear and circular machines are included.

OkCupid Data for Introductory Statistics and Data Science Courses

ERIC Educational Resources Information Center

Kim, Albert Y.; Escobedo-Land, Adriana

2015-01-01

We present a data set consisting of user profile data for 59,946 San Francisco OkCupid users (a free online dating website) from June 2012. The data set includes typical user information, lifestyle variables, and text responses to 10 essay questions. We present four example analyses suitable for use in undergraduate introductory probability and…

Systems and methods for imaging using radiation from laser produced plasmas

DOEpatents

Renard-Le Galloudec, Nathalie; Cowan, Thomas E.; Sentoku, Yasuhiko; Rassuchine, Jennifer

2009-06-30

In particular embodiments, the present disclosure provides systems and methods for imaging a subject using radiation emitted from a laser produced plasma generating by irradiating a target with a laser. In particular examples, the target includes at least one radiation enhancing component, such as a fluor, cap, or wire. In further examples, the target has a metal layer and an internal surface defining an internal apex, the internal apex of less than about 15 .mu.m, such as less than about 1 .mu.m. The targets may take a variety of shapes, including cones, pyramids, and hemispheres. Certain aspects of the present disclosure provide improved imaging of a subject, such as improved medical images of a radiation dose than typical conventional methods and systems.

Stakeholder Perceptions of Cyberbullying Cases: Application of the Uniform Definition of Bullying.

PubMed

Moreno, Megan A; Suthamjariya, Nina; Selkie, Ellen

2018-04-01

The Uniform Definition of Bullying was developed to address bullying and cyberbullying, and to promote consistency in measurement and policy. The purpose of this study was to understand community stakeholder perceptions of typical cyberbullying cases, and to evaluate how these case descriptions align with the Uniform Definition. In this qualitative case analysis we recruited stakeholders commonly involved in cyberbullying. We used purposeful sampling to identify and recruit adolescents and young adults, parents, and professionals representing education and health care. Participants were asked to write a typical case of cyberbullying and descriptors in the context of a group discussion. We applied content analysis to case excerpts using inductive and deductive approaches, and chi-squared tests for mixed methods analyses. A total of 68 participants contributed; participants included 73% adults and 27% adolescents and young adults. A total of 650 excerpts were coded from participants' example cases and 362 (55.6%) were consistent with components of the Uniform Definition. The most frequently mentioned component of the Uniform Definition was Aggressive Behavior (n = 218 excerpts), whereas Repeated was mentioned infrequently (n = 19). Most participants included two to three components of the Uniform Definition within an example case; none of the example cases included all components of the Uniform Definition. We found that most participants described cyberbullying cases using few components of the Uniform Definition. Findings can be applied toward considering refinement of the Uniform Definition to ensure stakeholders find it applicable to cyberbullying. Copyright © 2017 The Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Kranc: a Mathematica package to generate numerical codes for tensorial evolution equations

NASA Astrophysics Data System (ADS)

Husa, Sascha; Hinder, Ian; Lechner, Christiane

2006-06-01

We present a suite of Mathematica-based computer-algebra packages, termed "Kranc", which comprise a toolbox to convert certain (tensorial) systems of partial differential evolution equations to parallelized C or Fortran code for solving initial boundary value problems. Kranc can be used as a "rapid prototyping" system for physicists or mathematicians handling very complicated systems of partial differential equations, but through integration into the Cactus computational toolkit we can also produce efficient parallelized production codes. Our work is motivated by the field of numerical relativity, where Kranc is used as a research tool by the authors. In this paper we describe the design and implementation of both the Mathematica packages and the resulting code, we discuss some example applications, and provide results on the performance of an example numerical code for the Einstein equations. Program summaryTitle of program: Kranc Catalogue identifier: ADXS_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADXS_v1_0 Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Distribution format: tar.gz Computer for which the program is designed and others on which it has been tested: General computers which run Mathematica (for code generation) and Cactus (for numerical simulations), tested under Linux Programming language used: Mathematica, C, Fortran 90 Memory required to execute with typical data: This depends on the number of variables and gridsize, the included ADM example requires 4308 KB Has the code been vectorized or parallelized: The code is parallelized based on the Cactus framework. Number of bytes in distributed program, including test data, etc.: 1 578 142 Number of lines in distributed program, including test data, etc.: 11 711 Nature of physical problem: Solution of partial differential equations in three space dimensions, which are formulated as an initial value problem. In particular, the program is geared towards handling very complex tensorial equations as they appear, e.g., in numerical relativity. The worked out examples comprise the Klein-Gordon equations, the Maxwell equations, and the ADM formulation of the Einstein equations. Method of solution: The method of numerical solution is finite differencing and method of lines time integration, the numerical code is generated through a high level Mathematica interface. Restrictions on the complexity of the program: Typical numerical relativity applications will contain up to several dozen evolution variables and thousands of source terms, Cactus applications have shown scaling up to several thousand processors and grid sizes exceeding 500 3. Typical running time: This depends on the number of variables and the grid size: the included ADM example takes approximately 100 seconds on a 1600 MHz Intel Pentium M processor. Unusual features of the program: based on Mathematica and Cactus

Health Project Management. A Manual of Procedures for Formulating and Implementing Health Projects.

ERIC Educational Resources Information Center

Bainbridge, J.; Sapirie, S.

The manual presents 16 main steps for health project management, from project formulation through termination. The manual defines a health project as a temporary intensive effort to set up and put into operation a new or revised service that will result in the reduction of specific health or health-related problems. (Typical examples include the…

A Model of Self-Explanation Strategies of Instructional Text and Examples in the Acquisition of Programming Skills.

ERIC Educational Resources Information Center

Recker, Margaret M.; Pirolli, Peter

Students learning to program recursive LISP functions in a typical school-like lesson on recursion were observed. The typical lesson contains text and examples and involves solving a series of programming problems. The focus of this study is on students' learning strategies in new domains. In this light, a Soar computational model of…

Method and apparatus for characterizing and enhancing the functional performance of machine tools

DOEpatents

Barkman, William E; Babelay, Jr., Edwin F; Smith, Kevin Scott; Assaid, Thomas S; McFarland, Justin T; Tursky, David A; Woody, Bethany; Adams, David

2013-04-30

Disclosed are various systems and methods for assessing and improving the capability of a machine tool. The disclosure applies to machine tools having at least one slide configured to move along a motion axis. Various patterns of dynamic excitation commands are employed to drive the one or more slides, typically involving repetitive short distance displacements. A quantification of a measurable merit of machine tool response to the one or more patterns of dynamic excitation commands is typically derived for the machine tool. Examples of measurable merits of machine tool performance include workpiece surface finish, and the ability to generate chips of the desired length.

Analysis of typical fault-tolerant architectures using HARP

NASA Technical Reports Server (NTRS)

Bavuso, Salvatore J.; Bechta Dugan, Joanne; Trivedi, Kishor S.; Rothmann, Elizabeth M.; Smith, W. Earl

1987-01-01

Difficulties encountered in the modeling of fault-tolerant systems are discussed. The Hybrid Automated Reliability Predictor (HARP) approach to modeling fault-tolerant systems is described. The HARP is written in FORTRAN, consists of nearly 30,000 lines of codes and comments, and is based on behavioral decomposition. Using the behavioral decomposition, the dependability model is divided into fault-occurrence/repair and fault/error-handling models; the characteristics and combining of these two models are examined. Examples in which the HARP is applied to the modeling of some typical fault-tolerant systems, including a local-area network, two fault-tolerant computer systems, and a flight control system, are presented.

Apollo experience report: Mission evaluation team postflight documentation

NASA Technical Reports Server (NTRS)

Dodson, J. W.; Cordiner, D. H.

1975-01-01

The various postflight reports prepared by the mission evaluation team, including the final mission evaluation report, report supplements, anomaly reports, and the 5-day mission report, are described. The procedures for preparing each report from the inputs of the various disciplines are explained, and the general method of reporting postflight results is discussed. Recommendations for postflight documentation in future space programs are included. The official requirements for postflight documentation and a typical example of an anomaly report are provided as appendixes.

The NASA Electronic Parts and Packaging (NEPP) Program - NASA Items of Interest

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Sampson, Michael J.

2017-01-01

This presentation provides a background summary of the NEPP Program, its origins and operating principles followed by examples of issues and opportunities that NEPP is currently pursuing. These examples include Electrostatic Discharge protection procedures that are not being properly applied, one reason for which is the confusion caused by the numerous, different standards covering this topic. Updates are provided for key activities in radiation hardness assurance, and the evaluation of automotive grade electronic parts for use in space applications. Some recent examples of part problems experienced by NASA are briefly described and the latest trending of incidences of counterfeit electronic parts is shown graphically. Finally some forward actions are identified and the time, place and typical topics is provided for the next NEPP Electronic Technology Workshop (ETW).

Impact of Site Elevation on Mg Smelter Design

NASA Astrophysics Data System (ADS)

Baker, Phillip W.

Site elevation has many surprising and significant impacts on the engineering design of metallurgical plant of all types. Electrolytic magnesium smelters maybe built at high elevation for a variety of reasons including availability of raw material, energy or electric power. Because of the unit processes they typically involve, Mg smelters can be extensively impacted by site elevation. In this paper, generic examples of the design changes required to adapt a smelter originally designed for sea level to operate at 2700 m are presented. While the examples are drawn from a magnesium plant design case, these changes are generically applicable to all industrial plants utilizing similar unit processes irrespective of product.

Modal analysis of a nonuniform string with end mass and variable tension

NASA Technical Reports Server (NTRS)

Rheinfurth, M. H.; Galaboff, Z. J.

1983-01-01

Modal synthesis techniques for dynamic systems containing strings describe the lateral displacements of these strings by properly chosen shape functions. An iterative algorithm is provided to calculate the natural modes of a nonuniform string and variable tension for some typical boundary conditions including one end mass. Numerical examples are given for a string in a constant and a gravity gradient force field.

SAM 2 measurements of the polar stratospheric aerosol. Volume 9: October 1982 - April 1983

NASA Technical Reports Server (NTRS)

Mcmaster, L. R.; Powell, K. A.

1991-01-01

The Stratospheric Aerosol Measurement (SAM) II sensor aboard Nimbus 7 is providing 1.0 micron extinction measurements of Antarctic and Arctic stratospheric aerosols with a vertical resolution of 1 km. Representative examples and weekly averages including corresponding temperature profiles provided by NOAA for the time and place of each SAM II measurement are presented. Contours of aerosol extinction as a function of altitude and longitude or time are plotted, and aerosol optical depths are calculated for each week. Typical values of aerosol extinction and stratospheric optical depth in the Arctic are unusually large due to the presence of material from the El Chichon volcano eruption in the Spring of 1982. For example, the optical depth peaked at 0.068, more than 50 times background values. Typical values of aerosol extinction and stratospheric optical depth in the Antarctic varied considerably during this period due to the transport and arrival of the material from the El Chichon eruption. For example, the stratospheric optical depth varied from 0.002 in October 1982, to 0.021 in January 1983. Polar stratospheric clouds were observed during the Arctic winter, as expected. A representative sample is provided of the ninth 6-month period of data to be used in atmospheric and climatic studies.

Novel Approach to Simulate Sleep Apnea Patients for Evaluating Positive Pressure Therapy Devices.

PubMed

Isetta, Valentina; Montserrat, Josep M; Santano, Raquel; Wimms, Alison J; Ramanan, Dinesh; Woehrle, Holger; Navajas, Daniel; Farré, Ramon

2016-01-01

Bench testing is a useful method to characterize the response of different automatic positive airway pressure (APAP) devices under well-controlled conditions. However, previous models did not consider the diversity of obstructive sleep apnea (OSA) patients' characteristics and phenotypes. The objective of this proof-of-concept study was to design a new bench test for realistically simulating an OSA patient's night, and to implement a one-night example of a typical female phenotype for comparing responses to several currently-available APAP devices. We developed a novel approach aimed at replicating a typical night of sleep which includes different disturbed breathing events, disease severities, sleep/wake phases, body postures and respiratory artefacts. The simulated female OSA patient example that we implemented included periods of wake, light sleep and deep sleep with positional changes and was connected to ten different APAP devices. Flow and pressure readings were recorded; each device was tested twice. The new approach for simulating female OSA patients effectively combined a wide variety of disturbed breathing patterns to mimic the response of a predefined patient type. There were marked differences in response between devices; only three were able to overcome flow limitation to normalize breathing, and only five devices were associated with a residual apnea-hypopnea index of <5/h. In conclusion, bench tests can be designed to simulate specific patient characteristics, and typical stages of sleep, body position, and wake. Each APAP device behaved differently when exposed to this controlled model of a female OSA patient, and should lead to further understanding of OSA treatment.

Highest-weight representations of Brocherd`s algebras

DOE Office of Scientific and Technical Information (OSTI.GOV)

Slansky, R.

1997-01-01

General features of highest-weight representations of Borcherd`s algebras are described. to show their typical features, several representations of Borcherd`s extensions of finite-dimensional algebras are analyzed. Then the example of the extension of affine- su(2) to a Borcherd`s algebra is examined. These algebras provide a natural way to extend a Kac-Moody algebra to include the hamiltonian and number-changing operators in a generalized symmetry structure.

Phase space effects on fast ion distribution function modeling in tokamaks

NASA Astrophysics Data System (ADS)

Podestà, M.; Gorelenkova, M.; Fredrickson, E. D.; Gorelenkov, N. N.; White, R. B.

2016-05-01

Integrated simulations of tokamak discharges typically rely on classical physics to model energetic particle (EP) dynamics. However, there are numerous cases in which energetic particles can suffer additional transport that is not classical in nature. Examples include transport by applied 3D magnetic perturbations and, more notably, by plasma instabilities. Focusing on the effects of instabilities, ad-hoc models can empirically reproduce increased transport, but the choice of transport coefficients is usually somehow arbitrary. New approaches based on physics-based reduced models are being developed to address those issues in a simplified way, while retaining a more correct treatment of resonant wave-particle interactions. The kick model implemented in the tokamak transport code TRANSP is an example of such reduced models. It includes modifications of the EP distribution by instabilities in real and velocity space, retaining correlations between transport in energy and space typical of resonant EP transport. The relevance of EP phase space modifications by instabilities is first discussed in terms of predicted fast ion distribution. Results are compared with those from a simple, ad-hoc diffusive model. It is then shown that the phase-space resolved model can also provide additional insight into important issues such as internal consistency of the simulations and mode stability through the analysis of the power exchanged between energetic particles and the instabilities.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Podesta, M.; Gorelenkova, M.; Fredrickson, E. D.

Here, integrated simulations of tokamak discharges typically rely on classical physics to model energetic particle (EP) dynamics. However, there are numerous cases in which energetic particles can suffer additional transport that is not classical in nature. Examples include transport by applied 3D magnetic perturbations and, more notably, by plasma instabilities. Focusing on the effects of instabilities,ad-hocmodels can empirically reproduce increased transport, but the choice of transport coefficients is usually somehow arbitrary. New approaches based on physics-based reduced models are being developed to address those issues in a simplified way, while retaining a more correct treatment of resonant wave-particle interactions. Themore » kick model implemented in the tokamaktransport code TRANSP is an example of such reduced models. It includes modifications of the EP distribution by instabilities in real and velocity space, retaining correlations between transport in energy and space typical of resonant EP transport. The relevance of EP phase space modifications by instabilities is first discussed in terms of predicted fast ion distribution. Results are compared with those from a simple, ad-hoc diffusive model. It is then shown that the phase-space resolved model can also provide additional insight into important issues such as internal consistency of the simulations and mode stability through the analysis of the power exchanged between energetic particles and the instabilities.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Podestà, M., E-mail: mpodesta@pppl.gov; Gorelenkova, M.; Fredrickson, E. D.

Integrated simulations of tokamak discharges typically rely on classical physics to model energetic particle (EP) dynamics. However, there are numerous cases in which energetic particles can suffer additional transport that is not classical in nature. Examples include transport by applied 3D magnetic perturbations and, more notably, by plasma instabilities. Focusing on the effects of instabilities, ad-hoc models can empirically reproduce increased transport, but the choice of transport coefficients is usually somehow arbitrary. New approaches based on physics-based reduced models are being developed to address those issues in a simplified way, while retaining a more correct treatment of resonant wave-particle interactions.more » The kick model implemented in the tokamak transport code TRANSP is an example of such reduced models. It includes modifications of the EP distribution by instabilities in real and velocity space, retaining correlations between transport in energy and space typical of resonant EP transport. The relevance of EP phase space modifications by instabilities is first discussed in terms of predicted fast ion distribution. Results are compared with those from a simple, ad-hoc diffusive model. It is then shown that the phase-space resolved model can also provide additional insight into important issues such as internal consistency of the simulations and mode stability through the analysis of the power exchanged between energetic particles and the instabilities.« less

Phase space effects on fast ion distribution function modeling in tokamaks

DOE Data Explorer

White, R. B. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Podesta, M. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Gorelenkova, M. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Fredrickson, E. D. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Gorelenkov, N. N. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States)

2016-06-01

Integrated simulations of tokamak discharges typically rely on classical physics to model energetic particle (EP) dynamics. However, there are numerous cases in which energetic particles can suffer additional transport that is not classical in nature. Examples include transport by applied 3D magnetic perturbations and, more notably, by plasma instabilities. Focusing on the effects of instabilities, ad-hoc models can empirically reproduce increased transport, but the choice of transport coefficients is usually somehow arbitrary. New approaches based on physics-based reduced models are being developed to address those issues in a simplified way, while retaining a more correct treatment of resonant wave-particle interactions. The kick model implemented in the tokamak transport code TRANSP is an example of such reduced models. It includes modifications of the EP distribution by instabilities in real and velocity space, retaining correlations between transport in energy and space typical of resonant EP transport. The relevance of EP phase space modifications by instabilities is first discussed in terms of predicted fast ion distribution. Results are compared with those from a simple, ad-hoc diffusive model. It is then shown that the phase-space resolved model can also provide additional insight into important issues such as internal consistency of the simulations and mode stability through the analysis of the power exchanged between energetic particles and the instabilities.

The understanding and self-reported use of emotional display rules in children with autism spectrum disorders.

PubMed

Begeer, Sander; Banerjee, Robin; Rieffe, Carolien; Terwogt, Mark Meerum; Potharst, Eva; Stegge, Hedy; Koot, Hans M

2011-08-01

Two studies examined the understanding and self-reported use of rules for the expressive display of emotions in children with high functioning autism spectrum disorders (HFASD) and in typically developing children. In Study 1, children from the two groups reported display rules equally often when presented with hypothetical situations that provided clear motives for using display rules, although emotion-masking displays were more commonly identified for vignettes with prosocial rather than self-protective motives. In Study 2, children were interviewed about display rule use in real life. Children with HFASD reported display rules less often, included more prototypical examples, and referred less often to prosocial motives than typically developing children. Children with HFASD appear to be aware of display rules, but are less adept at identifying the interpersonal functions of such rules than their typically developing peers.

Pendulum rides, rotations and the Coriolis effect

NASA Astrophysics Data System (ADS)

Pendrill, Ann-Marie; Modig, Conny

2018-07-01

An amusement park is full of examples that can be made into challenging problems for students, combining mathematical modelling with video analysis, as well as measurements in the rides. Traditional amusement ride related textbook problems include free-fall, circular motion, pendula and energy conservation in roller coasters, where the moving bodies are typically considered point-like. However, an amusement park can offer many more examples that are useful in physics and engineering education, many of them with strong mathematical content. This paper analyses forces on riders in a large rotating pendulum ride, where the Coriolis effect is sufficiently large to be visible in accelerometer data from the rides and leads to different ride experiences in different positions.

Powered protrusion cutter

DOEpatents

Bzorgi, Fariborz M.

2010-03-09

An apparatus for clipping a protrusion of material is provided. The protrusion may, for example, be a bolt head, a nut, a rivet, a weld bead, or a temporary assembly alignment tab protruding from a substrate surface of assembled components. The apparatus typically includes a cleaver having a cleaving edge and a cutting blade having a cutting edge. Generally, a mounting structure configured to confine the cleaver and the cutting blade and permit a range of relative movement between the cleaving edge and the cutting edge is provided. Also typically included is a power device coupled to the cutting blade. The power device is configured to move the cutting edge toward the cleaving edge. In some embodiments the power device is activated by a momentary switch. A retraction device is also generally provided, where the retraction device is configured to move the cutting edge away from the cleaving edge.

Device for cutting protrusions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bzorgi, Fariborz M

An apparatus for clipping a protrusion of material is provided. The protrusion may, for example, be a bolt head, a nut, a rivet, a weld bead, or a temporary assembly alignment tab protruding from a substrate surface of assembled components. The apparatus typically includes a cleaver having a cleaving edge and a cutting blade having a cutting edge. Generally, a mounting structure configured to confine the cleaver and the cutting blade and permit a range of relative movement between the cleaving edge and the cutting edge is provided. Also typically included is a power device coupled to the cutting blade.more » The power device is configured to move the cutting edge toward the cleaving edge. In some embodiments the power device is activated by a momentary switch. A retraction device is also generally provided, where the retraction device is configured to move the cutting edge away from the cleaving edge.« less

Four-body trajectory optimization

NASA Technical Reports Server (NTRS)

Pu, C. L.; Edelbaum, T. N.

1973-01-01

A collection of typical three-body trajectories from the L1 libration point on the sun-earth line to the earth is presented. These trajectories in the sun-earth system are grouped into four distinct families which differ in transfer time and delta V requirements. Curves showing the variations of delta V with respect to transfer time, and typical two and three-impulse primer vector histories, are included. The development of a four-body trajectory optimization program to compute fuel optimal trajectories between the earth and a point in the sun-earth-moon system are also discussed. Methods for generating fuel optimal two-impulse trajectories which originate at the earth or a point in space, and fuel optimal three-impulse trajectories between two points in space, are presented. A brief qualitative comparison of these methods is given. An example of a four-body two-impulse transfer from the Li libration point to the earth is included.

EVA Development and Verification Testing at NASA's Neutral Buoyancy Laboratory

NASA Technical Reports Server (NTRS)

Jairala, Juniper; Durkin, Robert

2012-01-01

As an early step in preparing for future EVAs, astronauts perform neutral buoyancy testing to develop and verify EVA hardware and operations. To date, neutral buoyancy demonstrations at NASA JSC’s Sonny Carter Training Facility have primarily evaluated assembly and maintenance tasks associated with several elements of the ISS. With the retirement of the Space Shuttle, completion of ISS assembly, and introduction of commercial participants for human transportation into space, evaluations at the NBL will take on a new focus. In this session, Juniper Jairala briefly discussed the design of the NBL and, in more detail, described the requirements and process for performing a neutral buoyancy test, including typical hardware and support equipment requirements, personnel and administrative resource requirements, examples of ISS systems and operations that are evaluated, and typical operational objectives that are evaluated. Robert Durkin discussed the new and potential types of uses for the NBL, including those by non-NASA external customers.

EVA Development and Verification Testing at NASA's Neutral Buoyancy Laboratory

NASA Technical Reports Server (NTRS)

Jairala, Juniper; Durkin, Robert

2012-01-01

As an early step in preparing for future EVAs, astronauts perform neutral buoyancy testing to develop and verify EVA hardware and operations. To date, neutral buoyancy demonstrations at NASA JSC's Sonny Carter Training Facility have primarily evaluated assembly and maintenance tasks associated with several elements of the ISS. With the retirement of the Space Shuttle, completion of ISS assembly, and introduction of commercial participants for human transportation into space, evaluations at the NBL will take on a new focus. In this session, Juniper Jairala briefly discussed the design of the NBL and, in more detail, described the requirements and process for performing a neutral buoyancy test, including typical hardware and support equipment requirements, personnel and administrative resource requirements, examples of ISS systems and operations that are evaluated, and typical operational objectives that are evaluated. Robert Durkin discussed the new and potential types of uses for the NBL, including those by non-NASA external customers.

A Discussion of the Discrete Fourier Transform Execution on a Typical Desktop PC

NASA Technical Reports Server (NTRS)

White, Michael J.

2006-01-01

This paper will discuss and compare the execution times of three examples of the Discrete Fourier Transform (DFT). The first two examples will demonstrate the direct implementation of the algorithm. In the first example, the Fourier coefficients are generated at the execution of the DFT. In the second example, the coefficients are generated prior to execution and the DFT coefficients are indexed at execution. The last example will demonstrate the Cooley- Tukey algorithm, better known as the Fast Fourier Transform. All examples were written in C executed on a PC using a Pentium 4 running at 1.7 Ghz. As a function of N, the total complex data size, the direct implementation DFT executes, as expected at order of N2 and the FFT executes at order of N log2 N. At N=16K, there is an increase in processing time beyond what is expected. This is not caused by implementation but is a consequence of the effect that machine architecture and memory hierarchy has on implementation. This paper will include a brief overview of digital signal processing, along with a discussion of contemporary work with discrete Fourier processing.

NASA CR-2120 - Summary of nondestructive testing theory and practice

NASA Technical Reports Server (NTRS)

Meister, R. P.

1974-01-01

This is a familiarization report of nondestructive testing (ndt) prepared by staff of the Battelle Columbus Laboratories on a NASA contract. There is a short introduction, a chapter on applicability of ndt which is illustrated with examples of typical defects and includes tables comparing the characteristics, interrelationships, and costs of the different techniques. There are chapters dealing with penetrants, magnetic particle radiography, ultrasonics, and eddy currents. New techniques are described.

Targeted Nanomaterials for Phototherapy

PubMed Central

Chitgupi, Upendra; Qin, Yiru; Lovell, Jonathan F.

2017-01-01

Phototherapies involve the irradiation of target tissues with light. To further enhance selectivity and potency, numerous molecularly targeted photosensitizers and photoactive nanoparticles have been developed. Active targeting typically involves harnessing the affinity between a ligand and a cell surface receptor for improved accumulation in the targeted tissue. Targeting ligands including peptides, proteins, aptamers and small molecules have been explored for phototherapy. In this review, recent examples of targeted nanomaterials used in phototherapy are summarized. PMID:29071178

Method and apparatus for characterizing and enhancing the dynamic performance of machine tools

DOEpatents

Barkman, William E; Babelay, Jr., Edwin F

2013-12-17

Disclosed are various systems and methods for assessing and improving the capability of a machine tool. The disclosure applies to machine tools having at least one slide configured to move along a motion axis. Various patterns of dynamic excitation commands are employed to drive the one or more slides, typically involving repetitive short distance displacements. A quantification of a measurable merit of machine tool response to the one or more patterns of dynamic excitation commands is typically derived for the machine tool. Examples of measurable merits of machine tool performance include dynamic one axis positional accuracy of the machine tool, dynamic cross-axis stability of the machine tool, and dynamic multi-axis positional accuracy of the machine tool.

A forestry application simulation of man-machine techniques for analyzing remotely sensed data

NASA Technical Reports Server (NTRS)

Berkebile, J.; Russell, J.; Lube, B.

1976-01-01

The typical steps in the analysis of remotely sensed data for a forestry applications example are simulated. The example uses numerically-oriented pattern recognition techniques and emphasizes man-machine interaction.

Example-Based Learning: Effects of Model Expertise in Relation to Student Expertise

ERIC Educational Resources Information Center

Boekhout, Paul; van Gog, Tamara; van de Wiel, Margje W. J.; Gerards-Last, Dorien; Geraets, Jacques

2010-01-01

Background: Worked examples are very effective for novice learners. They typically present a written-out ideal (didactical) solution for learners to study. Aims: This study used worked examples of patient history taking in physiotherapy that presented a "non"-didactical solution (i.e., based on actual performance). The effects of model expertise…

Function Package for Computing Quantum Resource Measures

NASA Astrophysics Data System (ADS)

Huang, Zhiming

2018-05-01

In this paper, we present a function package for to calculate quantum resource measures and dynamics of open systems. Our package includes common operators and operator lists, frequently-used functions for computing quantum entanglement, quantum correlation, quantum coherence, quantum Fisher information and dynamics in noisy environments. We briefly explain the functions of the package and illustrate how to use the package with several typical examples. We expect that this package is a useful tool for future research and education.

Phase space effects on fast ion distribution function modeling in tokamaks

DOE PAGES

Podesta, M.; Gorelenkova, M.; Fredrickson, E. D.; ...

2016-04-14

Here, integrated simulations of tokamak discharges typically rely on classical physics to model energetic particle (EP) dynamics. However, there are numerous cases in which energetic particles can suffer additional transport that is not classical in nature. Examples include transport by applied 3D magnetic perturbations and, more notably, by plasma instabilities. Focusing on the effects of instabilities,ad-hocmodels can empirically reproduce increased transport, but the choice of transport coefficients is usually somehow arbitrary. New approaches based on physics-based reduced models are being developed to address those issues in a simplified way, while retaining a more correct treatment of resonant wave-particle interactions. Themore » kick model implemented in the tokamaktransport code TRANSP is an example of such reduced models. It includes modifications of the EP distribution by instabilities in real and velocity space, retaining correlations between transport in energy and space typical of resonant EP transport. The relevance of EP phase space modifications by instabilities is first discussed in terms of predicted fast ion distribution. Results are compared with those from a simple, ad-hoc diffusive model. It is then shown that the phase-space resolved model can also provide additional insight into important issues such as internal consistency of the simulations and mode stability through the analysis of the power exchanged between energetic particles and the instabilities.« less

Infrared weak corrections to strongly interacting gauge boson scattering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ciafaloni, Paolo; Urbano, Alfredo

2010-04-15

We evaluate the impact of electroweak corrections of infrared origin on strongly interacting longitudinal gauge boson scattering, calculating all-order resummed expressions at the double log level. As a working example, we consider the standard model with a heavy Higgs. At energies typical of forthcoming experiments (LHC, International Linear Collider, Compact Linear Collider), the corrections are in the 10%-40% range, with the relative sign depending on the initial state considered and on whether or not additional gauge boson emission is included. We conclude that the effect of radiative electroweak corrections should be included in the analysis of longitudinal gauge boson scattering.

What Is "Typical" for Different Kinds of Data? Examples from the Melbourne Cup

ERIC Educational Resources Information Center

Watson, Jane

2014-01-01

There are five words that are critical to an appreciation of what is "typical" in data sets that students encounter across the middle school years. The first three words--mean, median and mode--are nouns that define measures of typicality in data sets. The next two words--categorical and numerical--are adjectives that describe the types…

[The problem of small "n" and big "P" in neuropsycho-pharmacology, or how to keep the rate of false discoveries under control].

PubMed

Petschner, Péter; Bagdy, György; Tóthfalusi, Laszló

2015-03-01

One of the characteristics of many methods used in neuropsychopharmacology is that a large number of parameters (P) are measured in relatively few subjects (n). Functional magnetic resonance imaging, electroencephalography (EEG) and genomic studies are typical examples. For example one microarray chip can contain thousands of probes. Therefore, in studies using microarray chips, P may be several thousand-fold larger than n. Statistical analysis of such studies is a challenging task and they are refereed to in the statistical literature such as the small "n" big "P" problem. The problem has many facets including the controversies associated with multiple hypothesis testing. A typical scenario in this context is, when two or more groups are compared by the individual attributes. If the increased classification error due to the multiple testing is neglected, then several highly significant differences will be discovered. But in reality, some of these significant differences are coincidental, not reproducible findings. Several methods were proposed to solve this problem. In this review we discuss two of the proposed solutions, algorithms to compare sets and statistical hypothesis tests controlling the false discovery rate.

High-speed optical 3D sensing and its applications

NASA Astrophysics Data System (ADS)

Watanabe, Yoshihiro

2016-12-01

This paper reviews high-speed optical 3D sensing technologies for obtaining the 3D shape of a target using a camera. The focusing speed is from 100 to 1000 fps, exceeding normal camera frame rates, which are typically 30 fps. In particular, contactless, active, and real-time systems are introduced. Also, three example applications of this type of sensing technology are introduced, including surface reconstruction from time-sequential depth images, high-speed 3D user interaction, and high-speed digital archiving.

Military Review. Volume 83, Number 6, November-December 2003

DTIC Science & Technology

2003-12-01

Chechnya on 20 January 1996 is an example of a typical insurgent attack. As darkness fell, a team of from 10 to 12 insurgents surrounded the CP un- noticed...their posts and withdrew haphazardly to the regi- mental field site. On 31 May 1996 , a rebel detachment captured a regimental CP near Shuanya. Before...personnel. An insurgent group might include one or two snip- ers (an observer and a shooter ) and combat engi- neers who mine the firing position after

Basic Characteristics of Laser Heating in Thermoluminescence and of Laser-Stimulated Luminescence

DTIC Science & Technology

1990-07-15

as examples. These include LiF:Mg,Ti ( TLD -100, Harshaw Chemical Corporation) in form of chips, which are widely used in the dosimetry of ionizing...take dosimetry ( TLD ) of ionizing radiation because it holds pro- the form of discrete circular spots whose diameter is smaller mise as a solution to...function of typical phosphor, we choose the most widely used dosimetry time after onset of the laser exposure, the time-dependent material LiF:Mg,Ti ( TLD

Prediction of overall and blade-element performance for axial-flow pump configurations

NASA Technical Reports Server (NTRS)

Serovy, G. K.; Kavanagh, P.; Okiishi, T. H.; Miller, M. J.

1973-01-01

A method and a digital computer program for prediction of the distributions of fluid velocity and properties in axial flow pump configurations are described and evaluated. The method uses the blade-element flow model and an iterative numerical solution of the radial equilbrium and continuity conditions. Correlated experimental results are used to generate alternative methods for estimating blade-element turning and loss characteristics. Detailed descriptions of the computer program are included, with example input and typical computed results.

Aerospace applications of integer and combinatorial optimization

NASA Technical Reports Server (NTRS)

Padula, S. L.; Kincaid, R. K.

1995-01-01

Research supported by NASA Langley Research Center includes many applications of aerospace design optimization and is conducted by teams of applied mathematicians and aerospace engineers. This paper investigates the benefits from this combined expertise in solving combinatorial optimization problems. Applications range from the design of large space antennas to interior noise control. A typical problem, for example, seeks the optimal locations for vibration-damping devices on a large space structure and is expressed as a mixed/integer linear programming problem with more than 1500 design variables.

Rocket Engine Oscillation Diagnostics

NASA Technical Reports Server (NTRS)

Nesman, Tom; Turner, James E. (Technical Monitor)

2002-01-01

Rocket engine oscillating data can reveal many physical phenomena ranging from unsteady flow and acoustics to rotordynamics and structural dynamics. Because of this, engine diagnostics based on oscillation data should employ both signal analysis and physical modeling. This paper describes an approach to rocket engine oscillation diagnostics, types of problems encountered, and example problems solved. Determination of design guidelines and environments (or loads) from oscillating phenomena is required during initial stages of rocket engine design, while the additional tasks of health monitoring, incipient failure detection, and anomaly diagnostics occur during engine development and operation. Oscillations in rocket engines are typically related to flow driven acoustics, flow excited structures, or rotational forces. Additional sources of oscillatory energy are combustion and cavitation. Included in the example problems is a sampling of signal analysis tools employed in diagnostics. The rocket engine hardware includes combustion devices, valves, turbopumps, and ducts. Simple models of an oscillating fluid system or structure can be constructed to estimate pertinent dynamic parameters governing the unsteady behavior of engine systems or components. In the example problems it is shown that simple physical modeling when combined with signal analysis can be successfully employed to diagnose complex rocket engine oscillatory phenomena.

Measuring Mindreading: A Review of Behavioral Approaches to Testing Cognitive and Affective Mental State Attribution in Neurologically Typical Adults.

PubMed

Turner, Rose; Felisberti, Fatima M

2017-01-01

Mindreading refers to the ability to attribute mental states, including thoughts, intentions and emotions, to oneself and others, and is essential for navigating the social world. Empirical mindreading research has predominantly featured children, groups with autism spectrum disorder and clinical samples, and many standard tasks suffer ceiling effects with neurologically typical (NT) adults. We first outline a case for studying mindreading in NT adults and proceed to review tests of emotion perception, cognitive and affective mentalizing, and multidimensional tasks combining these facets. We focus on selected examples of core experimental paradigms including emotion recognition tests, social vignettes, narrative fiction (prose and film) and participative interaction (in real and virtual worlds), highlighting challenges for studies with NT adult cohorts. We conclude that naturalistic, multidimensional approaches may be productively applied alongside traditional tasks to facilitate a more nuanced picture of mindreading in adulthood, and to ensure construct validity whilst remaining sensitive to variation at the upper echelons of the ability.

Measuring Mindreading: A Review of Behavioral Approaches to Testing Cognitive and Affective Mental State Attribution in Neurologically Typical Adults

PubMed Central

Turner, Rose; Felisberti, Fatima M.

2017-01-01

Mindreading refers to the ability to attribute mental states, including thoughts, intentions and emotions, to oneself and others, and is essential for navigating the social world. Empirical mindreading research has predominantly featured children, groups with autism spectrum disorder and clinical samples, and many standard tasks suffer ceiling effects with neurologically typical (NT) adults. We first outline a case for studying mindreading in NT adults and proceed to review tests of emotion perception, cognitive and affective mentalizing, and multidimensional tasks combining these facets. We focus on selected examples of core experimental paradigms including emotion recognition tests, social vignettes, narrative fiction (prose and film) and participative interaction (in real and virtual worlds), highlighting challenges for studies with NT adult cohorts. We conclude that naturalistic, multidimensional approaches may be productively applied alongside traditional tasks to facilitate a more nuanced picture of mindreading in adulthood, and to ensure construct validity whilst remaining sensitive to variation at the upper echelons of the ability. PMID:28174552

Strategy Guideline: Quality Management in Existing Homes; Cantilever Floor Example

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taggart, J.; Sikora, J.; Wiehagen, J.

2011-12-01

This guideline is designed to highlight the QA process that can be applied to any residential building retrofit activity. The cantilevered floor retrofit detailed in this guideline is included only to provide an actual retrofit example to better illustrate the QA activities being presented. The goal of existing home high performing remodeling quality management systems (HPR-QMS) is to establish practices and processes that can be used throughout any remodeling project. The research presented in this document provides a comparison of a selected retrofit activity as typically done versus that same retrofit activity approached from an integrated high performance remodeling andmore » quality management perspective. It highlights some key quality management tools and approaches that can be adopted incrementally by a high performance remodeler for this or any high performance retrofit. This example is intended as a template and establishes a methodology that can be used to develop a portfolio of high performance remodeling strategies.« less

Phase and Pupil Amplitude Recovery for JWST Space-Optics Control

NASA Technical Reports Server (NTRS)

Dean, B. H.; Zielinski, T. P.; Smith, J. S.; Bolcar, M. R.; Aronstein, D. L.; Fienup, J. R.

2010-01-01

This slide presentation reviews the phase and pupil amplitude recovery for the James Webb Space Telescope (JWST) Near Infrared Camera (NIRCam). It includes views of the Integrated Science Instrument Module (ISIM), the NIRCam, examples of Phase Retrieval Data, Ghost Irradiance, Pupil Amplitude Estimation, Amplitude Retrieval, Initial Plate Scale Estimation using the Modulation Transfer Function (MTF), Pupil Amplitude Estimation vs lambda, Pupil Amplitude Estimation vs. number of Images, Pupil Amplitude Estimation vs Rotation (clocking), and Typical Phase Retrieval Results Also included is information about the phase retrieval approach, Non-Linear Optimization (NLO) Optimized Diversity Functions, and Least Square Error vs. Starting Pupil Amplitude.

Comparison of visual sensitivity to human and object motion in autism spectrum disorder.

PubMed

Kaiser, Martha D; Delmolino, Lara; Tanaka, James W; Shiffrar, Maggie

2010-08-01

Successful social behavior requires the accurate detection of other people's movements. Consistent with this, typical observers demonstrate enhanced visual sensitivity to human movement relative to equally complex, nonhuman movement [e.g., Pinto & Shiffrar, 2009]. A psychophysical study investigated visual sensitivity to human motion relative to object motion in observers with autism spectrum disorder (ASD). Participants viewed point-light depictions of a moving person and, for comparison, a moving tractor and discriminated between coherent and scrambled versions of these stimuli in unmasked and masked displays. There were three groups of participants: young adults with ASD, typically developing young adults, and typically developing children. Across masking conditions, typical observers showed enhanced visual sensitivity to human movement while observers in the ASD group did not. Because the human body is an inherently social stimulus, this result is consistent with social brain theories [e.g., Pelphrey & Carter, 2008; Schultz, 2005] and suggests that the visual systems of individuals with ASD may not be tuned for the detection of socially relevant information such as the presence of another person. Reduced visual sensitivity to human movements could compromise important social behaviors including, for example, gesture comprehension.

HCI∧2 framework: a software framework for multimodal human-computer interaction systems.

PubMed

Shen, Jie; Pantic, Maja

2013-12-01

This paper presents a novel software framework for the development and research in the area of multimodal human-computer interface (MHCI) systems. The proposed software framework, which is called the HCI∧2 Framework, is built upon publish/subscribe (P/S) architecture. It implements a shared-memory-based data transport protocol for message delivery and a TCP-based system management protocol. The latter ensures that the integrity of system structure is maintained at runtime. With the inclusion of bridging modules, the HCI∧2 Framework is interoperable with other software frameworks including Psyclone and ActiveMQ. In addition to the core communication middleware, we also present the integrated development environment (IDE) of the HCI∧2 Framework. It provides a complete graphical environment to support every step in a typical MHCI system development process, including module development, debugging, packaging, and management, as well as the whole system management and testing. The quantitative evaluation indicates that our framework outperforms other similar tools in terms of average message latency and maximum data throughput under a typical single PC scenario. To demonstrate HCI∧2 Framework's capabilities in integrating heterogeneous modules, we present several example modules working with a variety of hardware and software. We also present an example of a full system developed using the proposed HCI∧2 Framework, which is called the CamGame system and represents a computer game based on hand-held marker(s) and low-cost camera(s).

Back to the wilds: tapping evolutionary adaptations for resilient crops through systematic hybridization with crop wild relatives.

PubMed

Warschefsky, Emily; Penmetsa, R Varma; Cook, Douglas R; von Wettberg, Eric J B

2014-10-01

The genetic diversity of our crop plants has been substantially reduced during the process of domestication and breeding. This reduction in diversity necessarily constrains our ability to expand a crop's range of cultivation into environments that are more extreme than those in which it was domesticated, including into "sustainable" agricultural systems with reduced inputs of pesticides, water, and fertilizers. Conversely, the wild progenitors of crop plants typically possess high levels of genetic diversity, which underlie an expanded (relative to domesticates) range of adaptive traits that may be of agricultural relevance, including resistance to pests and pathogens, tolerance to abiotic extremes, and reduced dependence on inputs. Despite their clear potential for crop improvement, wild relatives have rarely been used systematically for crop improvement, and in no cases, have full sets of wild diversity been introgressed into a crop. Instead, most breeding efforts have focused on specific traits and dealt with wild species in a limited and typically ad hoc manner. Although expedient, this approach misses the opportunity to test a large suite of traits and deploy the full potential of crop wild relatives in breeding for the looming challenges of the 21st century. Here we review examples of hybridization in several species, both intentionally produced and naturally occurring, to illustrate the gains that are possible. We start with naturally occurring hybrids, and then examine a range of examples of hybridization in agricultural settings. © 2014 Botanical Society of America, Inc.

Space physics education via examples in the undergraduate physics curriculum

NASA Astrophysics Data System (ADS)

Martin, R.; Holland, D. L.

2011-12-01

The field of space physics is rich with examples of basic physics and analysis techniques, yet it is rarely seen in physics courses or textbooks. As space physicists in an undergraduate physics department we like to use research to inform teaching, and we find that students respond well to examples from magnetospheric science. While we integrate examples into general education courses as well, this talk will focus on physics major courses. Space physics examples are typically selected to illustrate a particular concept or method taught in the course. Four examples will be discussed, from an introductory electricity and magnetism course, a mechanics/nonlinear dynamics course, a computational physics course, and a plasma physics course. Space physics provides examples of many concepts from introductory E&M, including the application of Faraday's law to terrestrial magnetic storm effects and the use of the basic motion of charged particles as a springboard to discussion of the inner magnetosphere and the aurora. In the mechanics and nonlinear dynamics courses, the motion of charged particles in a magnetotail current sheet magnetic field is treated as a Newtonian dynamical system, illustrating the Poincaré surface-of-section technique, the partitioning of phase space, and the KAM theorem. Neural network time series analysis of AE data is used as an example in the computational physics course. Finally, among several examples, current sheet particle dynamics is utilized in the plasma physics course to illustrate the notion of adiabatic/guiding center motion and the breakdown of the adiabatic approximation. We will present short descriptions of our pedagogy and student assignments in this "backdoor" method of space physics education.

Light-based science and technologies and human civilization: an optical course for general education

NASA Astrophysics Data System (ADS)

Li, Xiaotong; Wang, Kaiwei; Yang, Qing; Si, Ke

2017-08-01

Starting from 2015, a general education course named "Light-based science and technologies and human civilization" has been offered in Zhejiang University. We try to give a humanism view angle to observe optics and optical engineering, and combine them with the relationship of human and the nature, the development of human society and human health. In this course we introduce different historical periods of light-based science and technologies, the great optical researchers, the typical research methods, advantages, academic discussions and the relationship with human civilization. The relevant cross-fields of learning and Nobel Prize winners are also included. This course provides the students with the typical examples about how academic revolution influences the world development, and also with humanism sight which exceeds the range of science and technologies themselves.

OBSERVING LYAPUNOV EXPONENTS OF INFINITE-DIMENSIONAL DYNAMICAL SYSTEMS.

PubMed

Ott, William; Rivas, Mauricio A; West, James

2015-12-01

Can Lyapunov exponents of infinite-dimensional dynamical systems be observed by projecting the dynamics into ℝ N using a 'typical' nonlinear projection map? We answer this question affirmatively by developing embedding theorems for compact invariant sets associated with C 1 maps on Hilbert spaces. Examples of such discrete-time dynamical systems include time- T maps and Poincaré return maps generated by the solution semigroups of evolution partial differential equations. We make every effort to place hypotheses on the projected dynamics rather than on the underlying infinite-dimensional dynamical system. In so doing, we adopt an empirical approach and formulate checkable conditions under which a Lyapunov exponent computed from experimental data will be a Lyapunov exponent of the infinite-dimensional dynamical system under study (provided the nonlinear projection map producing the data is typical in the sense of prevalence).

Dynamics of microorganism populations in recirculating nutrient solutions

NASA Technical Reports Server (NTRS)

Strayer, R. F.

1994-01-01

This overview covers the basic microbial ecology of recirculating hydroponic solutions. Examples from NASA and Soviet CELSS tests and the commercial hydroponic industry will be used. The sources of microorganisms in nutrient solutions include air, water, seeds, plant containers and plumbing, biological vectors, and personnel. Microbial fates include growth, death, and emigration. Important microbial habitats within nutrient delivery systems are root surfaces, hardware surfaces (biofilms), and solution suspension. Numbers of bacteria on root surfaces usually exceed those from the other habitats by several orders of magnitude. Gram negative bacteria dominate the microflora with fungal counts usually much lower. Trends typically show a decrease in counts with increasing time unless stressed plants increase root exudates. Important microbial activities include carbon mineralization and nitrogen transformations. Important detrimental interactions include competition with plants, and human and plant pathogenesis.

48 CFR 315.204-5 - Part IV-Representations and instructions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... as using too few.) (3) Examples of topics that form a basis for evaluation factors. Typical examples of topics that form a basis for the development of evaluation factors are listed in the following... special research, test, and other equipment or facilities. (vii) Managerial capability (ability to achieve...

48 CFR 315.204-5 - Part IV-Representations and instructions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... as using too few.) (3) Examples of topics that form a basis for evaluation factors. Typical examples of topics that form a basis for the development of evaluation factors are listed in the following... special research, test, and other equipment or facilities. (vii) Managerial capability (ability to achieve...

48 CFR 315.204-5 - Part IV-Representations and instructions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... as using too few.) (3) Examples of topics that form a basis for evaluation factors. Typical examples of topics that form a basis for the development of evaluation factors are listed in the following... special research, test, and other equipment or facilities. (vii) Managerial capability (ability to achieve...

Three typical examples of activation of the International Charter ``space and major disasters''

NASA Astrophysics Data System (ADS)

Bessis, J.-L.; Bequignon, J.; Mahmood, A.

This paper, after a brief description of the Charter organisation and of its implementation procedures, addresses three typical cases of Charter activation and the lessons learned to date. The first example will deal with the major earthquakes in January and February 2001 in El Salvador for the benefit of the Salvadorian National Register Centre, the second concerning flooding in the North-East and South of France in January and September 2002 with quick delivery of flood maps to the French Civil Protection Authority and the last one will focus on the Nyiragongo volcanic eruption near the town of Goma in the Democratic Republic of Congo.

Human compulsivity: A perspective from evolutionary medicine.

PubMed

Stein, Dan J; Hermesh, Haggai; Eilam, David; Segalas, Cosi; Zohar, Joseph; Menchon, Jose; Nesse, Randolph M

2016-05-01

Biological explanations address not only proximal mechanisms (for example, the underlying neurobiology of obsessive-compulsive disorder), but also distal mechanisms (that is, a consideration of how particular neurobiological mechanisms evolved). Evolutionary medicine has emphasized a series of explanations for vulnerability to disease, including constraints, mismatch, and tradeoffs. The current paper will consider compulsive symptoms in obsessive-compulsive and related disorders and behavioral addictions from this evolutionary perspective. It will argue that while obsessive-compulsive disorder (OCD) is typically best conceptualized as a dysfunction, it is theoretically and clinically valuable to understand some symptoms of obsessive-compulsive and related disorders in terms of useful defenses. The symptoms of behavioral addictions can also be conceptualized in evolutionary terms (for example, mismatch), which in turn provides a sound foundation for approaching assessment and intervention. Copyright © 2016. Published by Elsevier B.V.

Toward a Systematic Approach for Selection of NASA Technology Portfolios

NASA Technical Reports Server (NTRS)

Weisbin, Charles R.; Rodriguez, Guillermo; Alberto, Elfes; Smith, Jeffrey H.

2004-01-01

There is an important need for a consistent analytical foundation supporting the selection and monitoring of R&D tasks that support new system concepts that enable future NASA missions. This capability should be applicable at various degrees of abstraction, depending upon whether one is interested in formulation, development, or operations. It should also be applicable to a single project, a program comprised of a group of projects, an enterprise typically including multiple programs, and the overall agency itself. Emphasis here is on technology selection and new initiatives, but the same approach can be generalized to other applications, dealing, for example, with new system architectures, risk reduction, and task allocation among humans and machines. The purpose of this paper is to describe one such approach, which is in its early stages of implementation within NASA programs, and to discuss several illustrative examples.

Industrial uses and applications of ionic liquids

NASA Astrophysics Data System (ADS)

Gutowski, Keith E.

2018-02-01

Ionic liquids are salts that melt at low temperatures (usually defined as less than 100 °C) and have a number of interesting properties that make them useful for industrial applications. Typical ionic liquid properties include high thermal stabilities, negligible vapor pressures, wide liquidus ranges, broad electrochemical windows, and unique solvation properties. Furthermore, the potential combinations of cations and anions provide nearly unlimited chemical tunability. This article will describe the diverse industrial uses of ionic liquids and how their unique properties are leveraged, with examples ranging from chemical processing to consumer packaged goods.

Structural Safety of a Hubble Space Telescope Science Instrument

NASA Technical Reports Server (NTRS)

Lou, M. C.; Brent, D. N.

1993-01-01

This paper gives an overview of safety requirements related to structural design and verificationof payloads to be launched and/or retrieved by the Space Shuttle. To demonstrate the generalapproach used to implement these requirements in the development of a typical Shuttle payload, theWide Field/Planetary Camera II, a second generation science instrument currently being developed bythe Jet Propulsion Laboratory (JPL) for the Hubble Space Telescope is used as an example. Inaddition to verification of strength and dynamic characteristics, special emphasis is placed upon thefracture control implementation process, including parts classification and fracture controlacceptability.

Precedent approach to the formation of programs for cyclic objects control

NASA Astrophysics Data System (ADS)

Kulakov, S. M.; Trofimov, V. B.; Dobrynin, A. S.; Taraborina, E. N.

2018-05-01

The idea and procedure for formalizing the precedent method of formation of complex control solutions (complex control programs) is discussed with respect to technological or organizational objects, the operation of which is organized cyclically. A typical functional structure of the system of precedent control by complex technological unit is developed, including a subsystem of retrospective optimization of actually implemented control programs. As an example, the problem of constructing replaceable planograms for the operation of the link of a heading-and-winning machine on the basis of precedents is considered.

Molecules with enhanced electronic polarizabilities based on defect-like states in conjugated polymers

NASA Technical Reports Server (NTRS)

Beratan, David N. (Inventor)

1991-01-01

Highly conjugated organic polymers typically have large non-resonant electronic susceptibilities, which give the molecules unusual optical properties. To enhance these properties, defects are introduced into the polymer chain. Examples include light doping of the conjugated polymer and synthesis, conjugated polymers which incorporate either electron donating or accepting groups, and conjugated polymers which contain a photoexcitable species capable of reversibly transferring its electron to an acceptor. Such defects in the chain permit enhancement of the second hyperpolarizability by at least an order of magnitude.

Measuring unsteady pressure on rotating compressor blades

NASA Technical Reports Server (NTRS)

Englund, D. R.; Grant, H. P.; Lanati, G. A.

1979-01-01

Miniature semiconductor strain gage pressure transducers mounted in several arrangements were studied. Both surface mountings and recessed flush mountings were tested. Test parameters included mounting arrangement, blade material, temperature, local strain in the acceleration normal to the transducer diaphragm, centripetal acceleration, and pressure. Test results show no failures of transducers or mountings and indicate an uncertainty of unsteady pressure measurement of approximately + or - 6 percent + 0.1 kPa for a typical application. Two configurations were used on a rotating fan flutter program. Examples of transducer data and correction factors are presented.

Aerospace Applications of Integer and Combinatorial Optimization

NASA Technical Reports Server (NTRS)

Padula, S. L.; Kincaid, R. K.

1995-01-01

Research supported by NASA Langley Research Center includes many applications of aerospace design optimization and is conducted by teams of applied mathematicians and aerospace engineers. This paper investigates the benefits from this combined expertise in formulating and solving integer and combinatorial optimization problems. Applications range from the design of large space antennas to interior noise control. A typical problem, for example, seeks the optimal locations for vibration-damping devices on an orbiting platform and is expressed as a mixed/integer linear programming problem with more than 1500 design variables.

Aerospace applications on integer and combinatorial optimization

NASA Technical Reports Server (NTRS)

Padula, S. L.; Kincaid, R. K.

1995-01-01

Research supported by NASA Langley Research Center includes many applications of aerospace design optimization and is conducted by teams of applied mathematicians and aerospace engineers. This paper investigates the benefits from this combined expertise in formulating and solving integer and combinatorial optimization problems. Applications range from the design of large space antennas to interior noise control. A typical problem. for example, seeks the optimal locations for vibration-damping devices on an orbiting platform and is expressed as a mixed/integer linear programming problem with more than 1500 design variables.

DMSO/base hydrolysis method for the disposal of high explosives and related energetic materials

DOEpatents

Desmare, Gabriel W.; Cates, Dillard M.

2002-05-14

High explosives and related energetic materials are treated via a DMSO/base hydrolysis method which renders them non-explosive and/or non-energetic. For example, high explosives such as 1,3,5,7-tetraaza-1,3,5,7-tetranitrocyclooctane (HMX), 1,3,5-triaza-1,3,5-trinitrocyclohexane (RDX), 2,4,6-trinitrotoluene (TNT), or mixtures thereof, may be dissolved in a polar, aprotic solvent and subsequently hydrolyzed by adding the explosive-containing solution to concentrated aqueous base. Major hydrolysis products typically include nitrite, formate, and nitrous oxide.

UTIS as one example of standardization of subsea intervention systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haugen, F.G.

1995-12-31

The number of diverless subsea interventions has increased dramatically during the last few years. A number of types of tools and equipment have been designed and used. A typical procedure has been to develop new intervention tools under each new contract based on experience from the previous project. This is not at all optimal with regard to project cost and risk, and is no longer acceptable as the oil industry now calls for cost savings within all areas of field development. One answer to the problem will be to develop universal intervention systems with the capability to perform a rangemore » of related tasks, with only minor, planned modifications of the system. This philosophy will dramatically reduce planning, engineering, construction and interface work related to the intervention operation as the main work will be only to locate a standardized landing facility on the subsea structure. The operating procedures can be taken ``off the shelf``. To adapt to this philosophy within the tie-in area, KOS decided to standardize on a Universal Tie-In System (UTIS), which will be included in a Tool Pool for rental world-wide. This paper describes UTIS as a typical example of standardization of subsea intervention systems. 16 figs., 1 tab.« less

The Undergraduate ALFALFA Groups Project: Development of a Galaxy Environment Index

NASA Astrophysics Data System (ADS)

Crone, Mary; Turner, J.; ALFALFA Team

2010-01-01

The Undergraduate ALFALFA (Arecibo Legacy Fast ALFA) Team Groups Project is a collaborative undertaking of faculty and undergraduates at 8 institutions, aimed at investigating properties of galaxy groups surveyed by the ALFALFA blind HI survey. We present a galaxy environment index designed to reflect local density in the regions surrounding galaxy groups. These regions typically include hundreds of galaxies with optical and HI properties that can be compared with environment. For example, an 8x10 degree region surrounding the group MKW 11 includes 535 galaxies at the group redshift of 0.02, 139 of which are detected in HI. This work has been supported by NSF grants AST-0724918, AST-0725267, and AST-0725380.

Learning and Understanding System Stability Using Illustrative Dynamic Texture Examples

ERIC Educational Resources Information Center

Liu, Huaping; Xiao, Wei; Zhao, Hongyan; Sun, Fuchun

2014-01-01

System stability is a basic concept in courses on dynamic system analysis and control for undergraduate students with computer science backgrounds. Typically, this was taught using a simple simulation example of an inverted pendulum. Unfortunately, many difficult issues arise in the learning and understanding of the concepts of stability,…

The Transmission Line as a Simple Example for Introducing Integral Equations to Undergraduates

ERIC Educational Resources Information Center

Rothwell, E. J.

2009-01-01

Integral equations are becoming a common means for describing problems in electromagnetics, and so it is important to expose students to methods for their solution. Typically this is done using examples in antennas, scattering, or electrostatics. Unfortunately, many difficult issues arise in the formulation and solution of the associated…

Meaningful Intuitions: The Evidential Role of Intuitions in the Study of Language

ERIC Educational Resources Information Center

Maynes, Jeffrey

2012-01-01

Philosophical theories are often repudiated, or taken to be repudiated, by identifying counter-examples. These counter-examples are typically based upon our natural response to a real or hypothetical scenario, also called our intuition about the scenario. This methodology of appealing to intuition has been the focus of recent debates about…

Atmospheric effects on active illumination

NASA Astrophysics Data System (ADS)

Shaw, Scot E. J.; Kansky, Jan E.

2005-08-01

For some beam-control applications, we can rely on the cooperation of the target when gathering information about the target location and the state of the atmosphere between the target and the beam-control system. The typical example is a cooperative point-source beacon on the target. Light from such a beacon allows the beam-control system to track the target accurately, and, if higher-order adaptive optics is to be employed, to make wave-front measurements and apply appropriate corrections with a deformable mirror. In many applications, including directed-energy weapons, the target is not cooperative. In the absence of a cooperative beacon, we must find other ways to collect the relevant information. This can be accomplished with an active-illumination system. Typically, this means shining one or more lasers at the target and observing the reflected light. In this paper, we qualitatively explore a number of difficulties inherent to active illumination, and suggest some possible mitigation techniques.

Compression of strings with approximate repeats.

PubMed

Allison, L; Edgoose, T; Dix, T I

1998-01-01

We describe a model for strings of characters that is loosely based on the Lempel Ziv model with the addition that a repeated substring can be an approximate match to the original substring; this is close to the situation of DNA, for example. Typically there are many explanations for a given string under the model, some optimal and many suboptimal. Rather than commit to one optimal explanation, we sum the probabilities over all explanations under the model because this gives the probability of the data under the model. The model has a small number of parameters and these can be estimated from the given string by an expectation-maximization (EM) algorithm. Each iteration of the EM algorithm takes O(n2) time and a few iterations are typically sufficient. O(n2) complexity is impractical for strings of more than a few tens of thousands of characters and a faster approximation algorithm is also given. The model is further extended to include approximate reverse complementary repeats when analyzing DNA strings. Tests include the recovery of parameter estimates from known sources and applications to real DNA strings.

Gear optimization

NASA Technical Reports Server (NTRS)

Vanderplaats, G. N.; Chen, Xiang; Zhang, Ning-Tian

1988-01-01

The use of formal numerical optimization methods for the design of gears is investigated. To achieve this, computer codes were developed for the analysis of spur gears and spiral bevel gears. These codes calculate the life, dynamic load, bending strength, surface durability, gear weight and size, and various geometric parameters. It is necessary to calculate all such important responses because they all represent competing requirements in the design process. The codes developed here were written in subroutine form and coupled to the COPES/ADS general purpose optimization program. This code allows the user to define the optimization problem at the time of program execution. Typical design variables include face width, number of teeth and diametral pitch. The user is free to choose any calculated response as the design objective to minimize or maximize and may impose lower and upper bounds on any calculated responses. Typical examples include life maximization with limits on dynamic load, stress, weight, etc. or minimization of weight subject to limits on life, dynamic load, etc. The research codes were written in modular form for easy expansion and so that they could be combined to create a multiple reduction optimization capability in future.

The visual system of male scale insects

NASA Astrophysics Data System (ADS)

Buschbeck, Elke K.; Hauser, Martin

2009-03-01

Animal eyes generally fall into two categories: (1) their photoreceptive array is convex, as is typical for camera eyes, including the human eye, or (2) their photoreceptive array is concave, as is typical for the compound eye of insects. There are a few rare examples of the latter eye type having secondarily evolved into the former one. When viewed in a phylogenetic framework, the head morphology of a variety of male scale insects suggests that this group could be one such example. In the Margarodidae (Hemiptera, Coccoidea), males have been described as having compound eyes, while males of some more derived groups only have two single-chamber eyes on each side of the head. Those eyes are situated in the place occupied by the compound eye of other insects. Since male scale insects tend to be rare, little is known about how their visual systems are organized, and what anatomical traits are associated with this evolutionary transition. In adult male Margarodidae, one single-chamber eye (stemmateran ocellus) is present in addition to a compound eye-like region. Our histological investigation reveals that the stemmateran ocellus has an extended retina which is formed by concrete clusters of receptor cells that connect to its own first-order neuropil. In addition, we find that the ommatidia of the compound eyes also share several anatomical characteristics with simple camera eyes. These include shallow units with extended retinas, each of which is connected by its own small nerve to the lamina. These anatomical changes suggest that the margarodid compound eye represents a transitional form to the giant unicornal eyes that have been described in more derived species.

Decontextualised Minds: Adolescents with Autism Are Less Susceptible to the Conjunction Fallacy than Typically Developing Adolescents

ERIC Educational Resources Information Center

Morsanyi, Kinga; Handley, Simon J.; Evans, Jonathan S. B. T.

2010-01-01

The conjunction fallacy has been cited as a classic example of the automatic contextualisation of problems. In two experiments we compared the performance of autistic and typically developing adolescents on a set of conjunction fallacy tasks. Participants with autism were less susceptible to the conjunction fallacy. Experiment 2 also demonstrated…

Parallel Simulation of Subsonic Fluid Dynamics on a Cluster of Workstations.

DTIC Science & Technology

1994-11-01

inside wind musical instruments. Typical simulations achieve $80\\%$ parallel efficiency (speedup/processors) using 20 HP-Apollo workstations. Detailed...TERMS AI, MIT, Artificial Intelligence, Distributed Computing, Workstation Cluster, Network, Fluid Dynamics, Musical Instruments 17. SECURITY...for example, the flow of air inside wind musical instruments. Typical simulations achieve 80% parallel efficiency (speedup/processors) using 20 HP

Paradigm shift from self-assembly to commanded assembly of functional materials: recent examples in porphyrin/fullerene supramolecular systems

NASA Astrophysics Data System (ADS)

Li, Mao; Ishihara, Shinsuke; Ji, Qingmin; Akada, Misaho; Hill, Jonathan P.; Ariga, Katsuhiko

2012-10-01

Current nanotechnology based on top-down nanofabrication may encounter a variety of drawbacks in the near future so that development of alternative methods, including the so-called bottom-up approach, has attracted considerable attention. However, the bottom-up strategy, which often relies on spontaneous self-assembly, might be inefficient in the development of the requisite functional materials and systems. Therefore, assembly processes controlled by external stimuli might be a plausible strategy for the development of bottom-up nanotechnology. In this review, we demonstrate a paradigm shift from self-assembly to commanded assembly by describing several examples of assemblies of typical functional molecules, i.e. porphyrins and fullerenes. In the first section, we describe recent progress in the design and study of self-assembled and co-assembled supramolecular architectures of porphyrins and fullerenes. Then, we show examples of assembly induced by external stimuli. We emphasize the paradigm shift from self-assembly to commanded assembly by describing the recently developed electrochemical-coupling layer-by-layer (ECC-LbL) methodology.

Dynamics of microorganism populations in recirculating nutrient solutions

NASA Technical Reports Server (NTRS)

Strayer, R. F.

1994-01-01

This overview covers the basic microbial ecology of recirculating hydroponic solutions. Examples from NASA and Soviet Controlled Ecological Life Support Systems (CELSS) tests and the commercial hydroponic industry will be used. The sources of microorganisms in nutrient solutions include air, water, seeds, plant containers and plumbing, biological vectors, and personnel. Microbial fates include growth, death, and emigration. Important microbial habitats within nutrient delivery systems are root surfaces, hardware surfaces (biofilms), and solution suspension. Numbers of bacteria on root surfaces usually exceed those from the other habitats by several orders of magnitude. Gram negative bacteria dominate the microflora with fungal counts usually much lower. Trends typically show a decrease in counts with increasing time unless stressed plants increase root exudates. Important microbial activities include carbon mineralization and nitrogen transformations. Important detrimental interactions include competition with plants, and human and plant pathogenesis.

[A cyborg is only human].

PubMed

Schermer, Maartje H N

2013-01-01

New biomedical technologies make it possible to replace parts of the human body or to substitute its functions. Examples include artificial joints, eye lenses and arterial stents. Newer technologies use electronics and software, for example in brain-computer interfaces such as retinal implants and the exoskeleton MindWalker. Gradually we are creating cyborgs: hybrids of man and machine. This raises the question: are cyborgs still humans? It is argued that they are. First, because employing technology is a typically human characteristic. Second, because in western thought the human mind, and not the body, is considered to be the seat of personhood. However, it has been argued by phenomenological philosophers that the body is more than just an object but is also a subject, important for human identity. From this perspective, we can appreciate that a bionic body does not make one less human, but it does influence the experience of being human.

Lattice Boltzmann Method for Spacecraft Propellant Slosh Simulation

NASA Technical Reports Server (NTRS)

Orr, Jeb S.; Powers, Joseph F.; Yang, Hong Q.

2015-01-01

A scalable computational approach to the simulation of propellant tank sloshing dynamics in microgravity is presented. In this work, we use the lattice Boltzmann equation (LBE) to approximate the behavior of two-phase, single-component isothermal flows at very low Bond numbers. Through the use of a non-ideal gas equation of state and a modified multiple relaxation time (MRT) collision operator, the proposed method can simulate thermodynamically consistent phase transitions at temperatures and density ratios consistent with typical spacecraft cryogenic propellants, for example, liquid oxygen. Determination of the tank forces and moments relies upon the global momentum conservation of the fluid domain, and a parametric wall wetting model allows tuning of the free surface contact angle. Development of the interface is implicit and no interface tracking approach is required. Numerical examples illustrate the method's application to predicting bulk fluid motion including lateral propellant slosh in low-g conditions.

Rheological Principles for Food Analysis

NASA Astrophysics Data System (ADS)

Daubert, Christopher R.; Foegeding, E. Allen

Food scientists are routinely confronted with the need to measure physical properties related to sensory texture and processing needs. These properties are determined by rheological methods, where rheology is a science devoted to the deformation and flow of all materials. Rheological properties should be considered a subset of the textural properties of foods, because the sensory detection of texture encompasses factors beyond rheological properties. Specifically, rheological methods accurately measure "force," "deformation," and "flow," and food scientists and engineers must determine how best to apply this information. For example, the flow of salad dressing from a bottle, the snapping of a candy bar, or the pumping of cream through a homogenizer are each related to the rheological properties of these materials. In this chapter, we describe fundamental concepts pertinent to the understanding of the subject and discuss typical examples of rheological tests for common foods. A glossary is included as Sect. 30.6 to clarify and summarize rheological definitions throughout the chapter.

Optimizing Introductory Physics for the Life Sciences: Placing Physics in Biological Context

NASA Astrophysics Data System (ADS)

Crouch, Catherine

2014-03-01

Physics is a critical foundation for today's life sciences and medicine. However, the physics content and ways of thinking identified by life scientists as most important for their fields are often not taught, or underemphasized, in traditional introductory physics courses. Furthermore, such courses rarely give students practice using physics to understand living systems in a substantial way. Consequently, students are unlikely to recognize the value of physics to their chosen fields, or to develop facility in applying physics to biological systems. At Swarthmore, as at several other institutions engaged in reforming this course, we have reorganized the introductory course for life science students around touchstone biological examples, in which fundamental physics contributes significantly to understanding biological phenomena or research techniques, in order to make explicit the value of physics to the life sciences. We have also focused on the physics topics and approaches most relevant to biology while seeking to develop rigorous qualitative reasoning and quantitative problem solving skills, using established pedagogical best practices. Each unit is motivated by and culminates with students analyzing one or more touchstone examples. For example, in the second semester we emphasize electric potential and potential difference more than electric field, and start from students' typically superficial understanding of the cell membrane potential and of electrical interactions in biochemistry to help them develop a more sophisticated understanding of electric forces, field, and potential, including in the salt water environment of life. Other second semester touchstones include optics of vision and microscopes, circuit models for neural signaling, and magnetotactic bacteria. When possible, we have adapted existing research-based curricular materials to support these examples. This talk will describe the design and development process for this course, give examples of materials, and present initial assessment data evaluating both content learning and student attitudes.

Nuclear reactor

DOEpatents

Yant, Howard W.; Stinebiser, Karl W.; Anzur, Gregory C.

1977-01-01

A nuclear reactor, particularly a liquid-metal breeder reactor, whose upper internals include outlet modules for channeling the liquid-metal coolant from selected areas of the outlet of the core vertically to the outlet plenum. The modules are composed of a highly-refractory, high corrosion-resistant alloy, for example, INCONEL-718. Each module is disposed to confine and channel generally vertically the coolant emitted from a subplurality of core-component assemblies. Each module has a grid with openings, each opening disposed to receive the coolant from an assembly of the subplurality. The grid in addition serves as a holdown for the assemblies of the corresponding subplurality preventing their excessive ejection upwardly from the core. In the region directly over the core the outlet modules are of such peripheral form that they nest forming a continuum over the core-component assemblies whose outlet coolant they confine. Each subassembly includes a chimney which confines the coolant emitted by its corresponding subassemblies to generally vertical flow between the outlet of the core and the outlet plenum. Each subplurality of assemblies whose emitted coolant is confined by an outlet module includes assemblies which emit lower-temperature coolant, for example, a control-rod assembly, or fertile assemblies, and assemblies which emit coolant of substantially higher temperature, for example, fuel-rod assemblies. The coolants of different temperatures are mixed in the chimneys reducing the effect of stripping (hot-cold temperature fluctuations) on the remainder of the upper internals which are composed typically of AISI-304 or AISI-316 stainless steel.

STAT FAQs Part 1: Floating Solar | State, Local, and Tribal Governments |

Science.gov Websites

interest in installing this innovative solar technology. For example, several wineries in California are tilt to 11 degrees. NREL research has shown that this is the typical mounting angle for floating solar installation. As an example, a hypothetical 1 MW floating solar array located in Napa, California would

The Importance of Prior Knowledge when Comparing Examples: Influences on Conceptual and Procedural Knowledge of Equation Solving

ERIC Educational Resources Information Center

Rittle-Johnson, Bethany; Star, Jon R.; Durkin, Kelley

2009-01-01

Comparing multiple examples typically supports learning and transfer in laboratory studies and is considered a key feature of high-quality mathematics instruction. This experimental study investigated the importance of prior knowledge in learning from comparison. Seventh- and 8th-grade students (N = 236) learned to solve equations by comparing…

Design of high reliability organizations in health care.

PubMed

Carroll, J S; Rudolph, J W

2006-12-01

To improve safety performance, many healthcare organizations have sought to emulate high reliability organizations from industries such as nuclear power, chemical processing, and military operations. We outline high reliability design principles for healthcare organizations including both the formal structures and the informal practices that complement those structures. A stage model of organizational structures and practices, moving from local autonomy to formal controls to open inquiry to deep self-understanding, is used to illustrate typical challenges and design possibilities at each stage. We suggest how organizations can use the concepts and examples presented to increase their capacity to self-design for safety and reliability.

Evaluating and Evolving Metadata in Multiple Dialects

NASA Technical Reports Server (NTRS)

Kozimore, John; Habermann, Ted; Gordon, Sean; Powers, Lindsay

2016-01-01

Despite many long-term homogenization efforts, communities continue to develop focused metadata standards along with related recommendations and (typically) XML representations (aka dialects) for sharing metadata content. Different representations easily become obstacles to sharing information because each representation generally requires a set of tools and skills that are designed, built, and maintained specifically for that representation. In contrast, community recommendations are generally described, at least initially, at a more conceptual level and are more easily shared. For example, most communities agree that dataset titles should be included in metadata records although they write the titles in different ways.

Method for measuring lead concentrations in blood

DOEpatents

Nogar, Nicholas S.

2001-01-01

Method for measuring lead concentrations in blood. The present invention includes the use of resonant laser ablation to analyze .ltoreq.1 .mu.L (or equivalent mass) samples of blood for lead content. A typical finger prick, for example, yields about 10 .mu.L. Solid samples may also readily be analyzed by resonant laser ablation. The sample is placed on a lead-free, electrically conducting substrate and irradiated with a single, focused laser beam which simultaneously vaporizes, atomizes, and resonantly ionizes an analyte of interest in a sample. The ions are then sorted, collected and detected using a mass spectrometer.

A Prototype Lisp-Based Soft Real-Time Object-Oriented Graphical User Interface for Control System Development

NASA Technical Reports Server (NTRS)

Litt, Jonathan; Wong, Edmond; Simon, Donald L.

1994-01-01

A prototype Lisp-based soft real-time object-oriented Graphical User Interface for control system development is presented. The Graphical User Interface executes alongside a test system in laboratory conditions to permit observation of the closed loop operation through animation, graphics, and text. Since it must perform interactive graphics while updating the screen in real time, techniques are discussed which allow quick, efficient data processing and animation. Examples from an implementation are included to demonstrate some typical functionalities which allow the user to follow the control system's operation.

Cryptanalysis of the Quantum Group Signature Protocols

NASA Astrophysics Data System (ADS)

Zhang, Ke-Jia; Sun, Ying; Song, Ting-Ting; Zuo, Hui-Juan

2013-11-01

Recently, the researches of quantum group signature (QGS) have attracted a lot of attentions and some typical protocols have been designed for e-payment system, e-government, e-business, etc. In this paper, we analyze the security of the quantum group signature with the example of two novel protocols. It can be seen that both of them cannot be implemented securely since the arbitrator cannot solve the disputes fairly. In order to show that, some possible attack strategies, which can be used by the malicious participants, are proposed. Moreover, the further discussions of QGS are presented finally, including some insecurity factors and improved ideas.

On applying cognitive psychology.

PubMed

Baddeley, Alan

2013-11-01

Recent attempts to assess the practical impact of scientific research prompted my own reflections on over 40 years worth of combining basic and applied cognitive psychology. Examples are drawn principally from the study of memory disorders, but also include applications to the assessment of attention, reading, and intelligence. The most striking conclusion concerns the many years it typically takes to go from an initial study, to the final practical outcome. Although the complexity and sheer timescale involved make external evaluation problematic, the combination of practical satisfaction and theoretical stimulation make the attempt to combine basic and applied research very rewarding. © 2013 The British Psychological Society.

NATO Guide for Judgment-Based Operational Analysis in Defence Decision Making (Guide OTAN pour l’analyse operationnelle basee sur le jugement dans la prise de decision de defense). Client-Oriented Volume

DTIC Science & Technology

2012-06-01

disputed thus leading to informed debate about the actions to take. The advice will lead to an informed debate about the pros and cons of...his preferred courses of action, compare pros and cons . Figure 4 illustrates how each phase may include tasks (and methods) that are typical of...options. Output: A compilation of the pros and cons of the three options. An example of presenting the data for this generic acquisition study is

NASA aviation safety reporting system

NASA Technical Reports Server (NTRS)

1980-01-01

Knowledge of limitations of the Air Traffic Control system in conflict avoidance capabilities is discussed. Assumptions and expectations held by by airmen regarding the capabilities of the system are presented. Limitations related to communication are described and problems associated with visual approaches, airspace configurations, and airport layouts are discussed. A number of pilot and controller reports illustrative of three typical problem types: occurrences involving pilots who have limited experience; reports describing inflight calls for assistance; and flights in which pilots have declined to use available radar services are presented. Examples of Alert Bulletins and the FAA responses to them are included.

In Search of Commonalities: Some Linguistic and Rhetorical Features of Business Reports as a Genre

ERIC Educational Resources Information Center

Yeung, Lorrita

2007-01-01

The present study analyzes 22 authentic business reports in an attempt to identify textual features that are typical of business reports as a genre. The analysis shows that there are certain characteristics which distinguish business reports from other related genres such as scientific reports, of which RAs are a typical example. There are also…

NASA Systems Analysis and Concepts Directorate Mission and Trade Study Analysis

NASA Technical Reports Server (NTRS)

Ricks, Wendell; Guynn, Mark; Hahn, Andrew; Lepsch, Roger; Mazanek, Dan; Dollyhigh, Sam

2006-01-01

Mission analysis, as practiced by the NASA Langley Research Center's Systems Analysis and Concepts Directorate (SACD), consists of activities used to define, assess, and evaluate a wide spectrum of aerospace systems for given requirements. The missions for these systems encompass a broad range from aviation to space exploration. The customer, who is usually another NASA organization or another government agency, often predefines the mission. Once a mission is defined, the goals and objectives that the system will need to meet are delineated and quantified. A number of alternative systems are then typically developed and assessed relative to these goals and objectives. This is done in order to determine the most favorable design approaches for further refinement. Trade studies are performed in order to understand the impact of a requirement on each system and to select among competing design options. Items varied in trade studies typically include: design variables or design constraints; technology and subsystem options; and operational approaches. The results of trade studies are often used to refine the mission and system requirements. SACD studies have been integral to the decision processes of many organizations for decades. Many recent examples of SACD mission and trade study analyses illustrate their excellence and influence. The SACD-led, Agency-wide effort to analyze a broad range of future human lunar exploration scenarios for NASA s Exploration Systems Mission Directorate (ESMD) and the Mars airplane design study in support of the Aerial Regional-scale Environment Survey of Mars (ARES) mission are two such examples. This paper describes SACD's mission and trade study analysis activities in general and presents the lunar exploration and Mars airplane studies as examples of type of work performed by the SACD.

Economic considerations in coverting from oil/gas firing to coal

NASA Technical Reports Server (NTRS)

Rau, J. G.

1978-01-01

Economic considerations involved in fuel conversion such as from oil and/or gas firing to coal are discussed including investments costs for new facilities and equipment (including air pollution control equipment), operation and maintenance costs, and purchased fuel costs. An analytical approach to assessing the cost effectiveness of fuel conversion in terms of the annual net cost of conversion, the equivalent annual number of barrels of oil saved, and the integral rate of return of the conversion investment is presented. Illustrative numerical examples are presented for typical utility boilers and industrial boiler facilities. A further consideration addressed deals with the impacts of these costs on the overall financial structure of the firm and the ability of the firm to raise the necessary investment captial.

Solid-state energy storage module employing integrated interconnect board

DOEpatents

Rouillard, Jean; Comte, Christophe; Daigle, Dominik; Hagen, Ronald A.; Knudson, Orlin B.; Morin, Andre; Ranger, Michel; Ross, Guy; Rouillard, Roger; St-Germain, Philippe; Sudano, Anthony; Turgeon, Thomas A.

2004-09-28

An electrochemical energy storage device includes a number of solid-state thin-film electrochemical cells which are selectively interconnected in series or parallel through use of an integrated interconnect board. The interconnect board is typically disposed within a sealed housing which also houses the electrochemical cells, and includes a first contact and a second contact respectively coupled to first and second power terminals of the energy storage device. The interconnect board advantageously provides for selective series or parallel connectivity with the electrochemical cells, irrespective of electrochemical cell position within the housing. Fuses and various electrical and electro-mechanical devices, such as bypass, equalization, and communication devices for example, may also be mounted to the interconnect board and selectively connected to the electrochemical cells.

"Social, technological, and research responses to potential erosion and sediment disasters in the western United States, with examples from California"

Treesearch

R. M. Rice

1985-01-01

Synopsis - Examples from California are used to illustrate typical responses to erosion and debris flow disasters the United States. Political institutions leave virtually all responsibility for disaster prevention to the lowest levels of government or to individuals. Three circumstances in which disasters occur are discussed: urbanized debris cones, urbanized unstable...

Social, technological, and research responses to potential erosion and sediment disasters in the western United States, with examples from California

Treesearch

R. M. Rice

1985-01-01

Examples from California are used to illustrate typical responses to erosion and debris flow disasters in the United States. Political institutions leave virtually all responsibility for disaster prevention to the lowest levels of government or to individuals. Three circumstances in which disasters occur are discussed: urbanized debris cones, urbanized unstable...

Some examples of geomorphodiversity in Italy

NASA Astrophysics Data System (ADS)

Panizza, Mario

2014-05-01

The concept of geomorphodiversity (Panizza, 2009) is presented: "the critical and specific assessment of the geomorphological features of a territory, by comparing them in a way both extrinsic (comparison of the geomorphological characteristics with those from other territories) and intrinsic (comparison of the geomorphological characteristics with other areas within the territory itself) and taking into account the level of their scientific quality, the scale of investigation and the purpose of the research". A first example concerns the Dolomites: they have been included in the UNESCO World Heritage List because of their exceptional beauty and unique landscape, together with their scientific importance from the geological and geomorphological point of view. They are of international significance for geomorphodiversity, as the classic site for the development of mountains in dolomite limestone and present a wide range of landforms related to erosion, tectonics and glaciation. They represent a kind of high altitude, open air laboratory of geomorphological heritage of exceptional global value, among the most extraordinary and accessible in the world and ideal for researching, teaching, understanding and developing Earth Science theories. The second example concerns the Emilia-Romagna Apennines, candidate for enrolment in the List of European Geoparks: they show a multifaceted and complex image from the international and regional geomorphological (extrinsic and intrinsic geomorphodiversity) point of view and are an educational example for illustrating morphotectonic evolution, stratigraphic and sedimentological sequences and morpholithological peculiarities connected with gypsum karst and clay mass wasting phenomena. The third example concerns the Vesuvius, one of the National Italian Parks: it shows an extrinsic geomorphodiversity mainly referred to the type of eruptions, with some exemplary processes inserted in international volcanic nomenclature; it makes up an important geoheritage that can be considered a field laboratory for research on volcanic geomorphology. At a regional level, intrinsic geomorphodiversity includes typical examples ascribable to lahars, relief inversion and pseudo-karst morphology.

Metabolic systems biology: a brief primer.

PubMed

Edwards, Lindsay M

2017-05-01

In the early to mid-20th century, reductionism as a concept in biology was challenged by key thinkers, including Ludwig von Bertalanffy. He proposed that living organisms were specific examples of complex systems and, as such, they should display characteristics including hierarchical organisation and emergent behaviour. Yet the true study of complete biological systems (for example, metabolism) was not possible until technological advances that occurred 60 years later. Technology now exists that permits the measurement of complete levels of the biological hierarchy, for example the genome and transcriptome. The complexity and scale of these data require computational models for their interpretation. The combination of these - systems thinking, high-dimensional data and computation - defines systems biology, typically accompanied by some notion of iterative model refinement. Only sequencing-based technologies, however, offer full coverage. Other 'omics' platforms trade coverage for sensitivity, although the densely connected nature of biological networks suggests that full coverage may not be necessary. Systems biology models are often characterised as either 'bottom-up' (mechanistic) or 'top-down' (statistical). This distinction can mislead, as all models rely on data and all are, to some degree, 'middle-out'. Systems biology has matured as a discipline, and its methods are commonplace in many laboratories. However, many challenges remain, especially those related to large-scale data integration. © 2016 The Authors. The Journal of Physiology © 2016 The Physiological Society.

When exceptions prove the rule: how extremity of deviance determines the impact of deviant examples on stereotypes.

PubMed

Kunda, Z; Oleson, K C

1997-05-01

The authors examined how the extent to which counterstereotypic individuals deviate from perceivers' stereotypes affects their impact on these stereotypes and found that extremely deviant group members provoke less stereotype assimilation than do moderately deviant ones. Extremely deviant examples can even provoke boomerang effects, that is, enhance the very stereotype that they violate. When participants whose prior stereotype were moderate or extreme were exposed to moderately or extremely deviant examples, the deviant examples' impact on stereotypes depended both on their extremity and on the extremity of perceivers' prior stereotypes. Boomerang effects were obtained only for extreme-stereotype participants exposed to extremely deviant examples and were mediated by perceptions of the typicality of the deviant examples. Open-ended explanations revealed that the atypicality of extremely deviant examples was used as grounds for dismissing them.

GHG emissions during the high-rate production of compost using standard and advanced aeration strategies.

PubMed

Puyuelo, B; Gea, T; Sánchez, A

2014-08-01

In this study, we have evaluated different strategies for the optimization of the aeration during the active thermophilic stage of the composting process of source-selected Organic Fraction of Municipal Solid Waste (or biowaste) using reactors at bench scale (50L). These strategies include: typical cyclic aeration, oxygen feedback controller and a new self-developed controller based on the on-line maximization of the oxygen uptake rate (OUR) during the process. Results highlight differences found in the emission of most representative greenhouse gases (GHG) emitted from composting (methane and nitrous oxide) as well as in gases typically related to composting odor problems (ammonia as typical example). Specifically, the cyclic controller presents emissions that can double that of OUR controller, whereas oxygen feedback controller shows a better performance with respect to the cyclic controller. A new parameter, the respiration index efficiency, is presented to quantitatively evaluate the GHG emissions and, in consequence, the main negative environmental impact of the composting process. Other aspects such as the stability of the compost produced and the consumption of resources are also evaluated for each controller. Copyright © 2014 Elsevier Ltd. All rights reserved.

Unexpected visitor on FDG PET/CT--brown adipose tissue (BAT) in mesentery in a case of retroperitoneal extra-adrenal pheochromocytoma: is the BAT activation secondary to catecholamine-secreting pheochromocytoma?

PubMed

Joshi, Prathamesh Vijay; Lele, Vikram Ramchandra

2012-05-01

Fused positron emission tomography-computed tomography (PET/CT) technology has enabled the determination that nonmalignant fluorodeoxyglucose (FDG) uptake is observed in brown adipose tissue (BAT). FDG uptake in BAT is a known potential source of false-positive interpretations for PET. The typical locations of BAT include neck, supraclavicular area, mediastinum, and paravertebral intercostal spaces. Examples of atypical locations for BAT include posterior neck, left paratracheal area, axillae, perirenal area, and retrocrural area. We report PET/CT findings in a young male patient with malignant retroperitoneal extra-adrenal pheochromocytoma, who demonstrated FDG uptake in BAT at multiple locations including mesenteric BAT. We also propose catecholamine-secreting pheochromocytoma as a possible cause of BAT activation in our case.

Community-Based Decision-Making: Application of Web ...

EPA Pesticide Factsheets

Living, working, and going to school near roadways has been associated with a number of adverse health effects, including asthma exacerbation, cardiovascular impairment, and respiratory symptoms. In the United States, 30% - 45% of urban populations live or work in the near-road environment, with a greater percentage of minority and low-income residents living in areas with highly- trafficked roadways. Near-road studies typically use surrogates of exposure to evaluate potential causality of health effects, including proximity, traffic counts, or total length of roads within a given radius. In contrast, simplified models provide an opportunity to examine how changes in input parameters, such as vehicle counts or speeds, can affect air quality. Simplified or reduced-form models typically retain the same or similar algorithms most responsible for characterizing uncertainty in more sophisticated models. The Community Line Source modeling system (C-LINE) allows users to explore what-if scenarios such as increases in diesel trucks or total traffic; examine hot spot conditions and areas for further study; determine ideal monitor placement locations; or evaluate air quality changes due to traffic re-routing. This presentation describes the input parameters, analytical procedures, visualization routines, and software considerations for C-LINE, and an example application for Newport News, Virginia. Results include scenarios related to port development and resulting traffic

An integrated tool for loop calculations: AITALC

NASA Astrophysics Data System (ADS)

Lorca, Alejandro; Riemann, Tord

2006-01-01

AITALC, a new tool for automating loop calculations in high energy physics, is described. The package creates Fortran code for two-fermion scattering processes automatically, starting from the generation and analysis of the Feynman graphs. We describe the modules of the tool, the intercommunication between them and illustrate its use with three examples. Program summaryTitle of the program:AITALC version 1.2.1 (9 August 2005) Catalogue identifier:ADWO Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADWO Program obtainable from:CPC Program Library, Queen's University of Belfast, N. Ireland Computer:PC i386 Operating system:GNU/ LINUX, tested on different distributions SuSE 8.2 to 9.3, Red Hat 7.2, Debian 3.0, Ubuntu 5.04. Also on SOLARIS Programming language used:GNU MAKE, DIANA, FORM, FORTRAN77 Additional programs/libraries used:DIANA 2.35 ( QGRAF 2.0), FORM 3.1, LOOPTOOLS 2.1 ( FF) Memory required to execute with typical data:Up to about 10 MB No. of processors used:1 No. of lines in distributed program, including test data, etc.:40 926 No. of bytes in distributed program, including test data, etc.:371 424 Distribution format:tar gzip file High-speed storage required:from 1.5 to 30 MB, depending on modules present and unfolding of examples Nature of the physical problem:Calculation of differential cross sections for ee annihilation in one-loop approximation. Method of solution:Generation and perturbative analysis of Feynman diagrams with later evaluation of matrix elements and form factors. Restriction of the complexity of the problem:The limit of application is, for the moment, the 2→2 particle reactions in the electro-weak standard model. Typical running time:Few minutes, being highly depending on the complexity of the process and the FORTRAN compiler.

Lithostratigraphy and shear-wave velocity in the crystallized Topopah Spring Tuff, Yucca Mountain, Nevada

USGS Publications Warehouse

Buesch, D.C.; Stokoe, K.H.; Won, K.C.; Seong, Y.J.; Jung, J.L.; Schuhen, M.D.

2006-01-01

Evaluation of the potential future response to seismic events of the proposed spent nuclear fuel and high-level radioactive waste repository at Yucca Mountain, Nevada, is in part based on the seismic properties of the host rock, the 12.8-million-year-old Topopah Spring Tuff. Because of the processes that formed the tuff, the densely welded and crystallized part has three lithophysal and three nonlithophysal zones, and each zone has characteristic variations in lithostratigraphic features and structures of the rocks. Lithostratigraphic features include lithophysal cavities; rims on lithophysae and some fractures; spots (which are similar to rims but without an associated cavity or aperture); amounts of porosity resulting from welding, crystallization, and vapor-phase corrosion and mineralization; and fractures. Seismic properties, including shear-wave velocity (Vs), have been measured on 38 pieces of core, and there is a good "first order" correlation with the lithostratigraphic zones; for example, samples from nonlithophysal zones have larger Vs values compared to samples from lithophysal zones. Some samples have Vs values that are outside the typical range for the lithostratigraphic zone; however, these samples typically have one or more fractures, "large" lithophysal cavities, or "missing pieces" relative to the sample size. Shear-wave velocity data measured in the tunnels have similar relations to lithophysal and nonlithophysal rocks; however, tunnel-based values are typically smaller than those measured in core resulting from increased lithophysae and fracturing effects. Variations in seismic properties such as Vs data from small-scale samples (typical and "flawed" core) to larger scale transects in the tunnels provide a basis for merging our understanding of the distributions of lithostratigraphic features (and zones) with a method to scale seismic properties.

Uxoricide in pregnancy: ancient Greek domestic violence in evolutionary perspective.

PubMed

Deacy, Susan; McHardy, Fiona

2013-10-24

Previous studies of ancient Greek examples of uxoricide in pregnancy have concluded that the theme is used to suggest tyrannical abuse of power and that the violence is a product of the patriarchal nature of ancient society. This article uses evolutionary analyses of violence during pregnancy to argue that the themes of sexual jealousy and uncertainty over paternity are as crucial as the theme of power to an understanding of these examples and that the examples can be seen as typical instances of spousal abuse as it occurs in all types of society.

The Morphology of Streams Restored for Market and Nonmarket Purposes: Insights From a Mixed Natural-Social Science Approach

NASA Astrophysics Data System (ADS)

Singh, J.; Doyle, M.; Lave, R.; Robertson, M.

2015-12-01

Stream restoration is increasingly driven by compensatory mitigation; impacts to streams associated with typical land development activities must be offset via restoration of streams elsewhere. This policy creates an environment where restored stream 'credits' are traded under market-like conditions, comparable to wetland mitigation, carbon offsets, or endangered species habitat banking. The effect of mitigation on restoration design and construction is unknown. We use geomorphic surveys to quantify the differences between restored and nonrestored streams, and the difference between streams restored for market purposes (compensatory mitigation) from those restored for nonmarket programs. Physical study sites are located in the state of North Carolina, USA. We also analyze the social and political-economic drivers of the stream restoration and mitigation industry using analysis of policy documents and interviews with key personnel including regulators, mitigation bankers, stream designers, and scientists. Restored streams are typically wider, shallower and geomorphically more homogeneous than nonrestored streams. For example, nonrestored streams are typically characterized by more than an order of magnitude variability in radius of curvature and meander wavelength within a single study reach. By contrast, the radius of curvature in many restored streams does not vary for nearly the entire project reach. Streams restored for the mitigation market are typically headwater streams and part of a large, complex of long restored main channels, and many restored tributaries; streams restored for nonmarket purposes are typically shorter and consist of the main channel only. Interviews reveal that social forces shape the morphology of restored streams. Designers integrate many influences including economic and regulatory constraints, but traditions of practice have a large influence as well. Home to a fairly mature stream mitigation banking market, North Carolina can provide lessons for other states or countries with younger mitigation banking programs (e.g., Oregon and Montana) as well as places considering their introduction.

Model-Based Reasoning in Upper-division Lab Courses

NASA Astrophysics Data System (ADS)

Lewandowski, Heather

2015-05-01

Modeling, which includes developing, testing, and refining models, is a central activity in physics. Well-known examples from AMO physics include everything from the Bohr model of the hydrogen atom to the Bose-Hubbard model of interacting bosons in a lattice. Modeling, while typically considered a theoretical activity, is most fully represented in the laboratory where measurements of real phenomena intersect with theoretical models, leading to refinement of models and experimental apparatus. However, experimental physicists use models in complex ways and the process is often not made explicit in physics laboratory courses. We have developed a framework to describe the modeling process in physics laboratory activities. The framework attempts to abstract and simplify the complex modeling process undertaken by expert experimentalists. The framework can be applied to understand typical processes such the modeling of the measurement tools, modeling ``black boxes,'' and signal processing. We demonstrate that the framework captures several important features of model-based reasoning in a way that can reveal common student difficulties in the lab and guide the development of curricula that emphasize modeling in the laboratory. We also use the framework to examine troubleshooting in the lab and guide students to effective methods and strategies.

Single-mode plasmonic waveguiding properties of metal nanowires with dielectric substrates.

PubMed

Wang, Yipei; Ma, Yaoguang; Guo, Xin; Tong, Limin

2012-08-13

Single-mode plasmonic waveguiding properties of metal nanowires with dielectric substrates are investigated using a finite-element method. Au and Ag are selected as plasmonic materials for nanowire waveguides with diameters down to 5-nm-level. Typical dielectric materials with relatively low to high refractive indices, including magnesium fluoride (MgF2), silica (SiO2), indium tin oxide (ITO) and titanium dioxide (TiO2), are used as supporting substrates. Basic waveguiding properties, including propagation constants, power distributions, effective mode areas, propagation distances and losses are obtained at the typical plasmonic resonance wavelength of 660 nm. Compared to that of a freestanding nanowire, the mode area of a substrate-supported nanowire could be much smaller while maintaining an acceptable propagation length. For example, the mode area and propagation length of a 100-nm-diameter Ag nanowire with a MgF2 substrate are about 0.004 μm2 and 3.4 μm, respectively. The dependences of waveguiding properties on geometric and material parameters of the nanowire-substrate system are also provided. Our results may provide valuable references for waveguiding dielectric-supported metal nanowires for practical applications.

Computer-program documentation of an interactive-accounting model to simulate streamflow, water quality, and water-supply operations in a river basin

USGS Publications Warehouse

Burns, A.W.

1988-01-01

This report describes an interactive-accounting model used to simulate streamflow, chemical-constituent concentrations and loads, and water-supply operations in a river basin. The model uses regression equations to compute flow from incremental (internode) drainage areas. Conservative chemical constituents (typically dissolved solids) also are computed from regression equations. Both flow and water quality loads are accumulated downstream. Optionally, the model simulates the water use and the simplified groundwater systems of a basin. Water users include agricultural, municipal, industrial, and in-stream users , and reservoir operators. Water users list their potential water sources, including direct diversions, groundwater pumpage, interbasin imports, or reservoir releases, in the order in which they will be used. Direct diversions conform to basinwide water law priorities. The model is interactive, and although the input data exist in files, the user can modify them interactively. A major feature of the model is its color-graphic-output options. This report includes a description of the model, organizational charts of subroutines, and examples of the graphics. Detailed format instructions for the input data, example files of input data, definitions of program variables, and listing of the FORTRAN source code are Attachments to the report. (USGS)

Persistent Identifiers for Field Deployments: A Missing Link in the Provenance Chain

NASA Astrophysics Data System (ADS)

Arko, R. A.; Ji, P.; Fils, D.; Shepherd, A.; Chandler, C. L.; Lehnert, K.

2016-12-01

Research in the geosciences is characterized by a wide range of complex and costly field deployments including oceanographic cruises, submersible dives, drilling expeditions, seismic networks, geodetic campaigns, moored arrays, aircraft flights, and satellite missions. Each deployment typically produces a mix of sensor and sample data, spanning a period from hours to decades, that ultimately yields a long tail of post-field products and publications. Publishing persistent, citable identifiers for field deployments will facilitate 1) preservation and reuse of the original field data, 2) reproducibility of the resulting publications, and 3) recognition for both the facilities that operate the platforms and the investigators who secure funding for the experiments. In the ocean domain, sharing unique identifiers for field deployments is a familiar practice. For example, the Biological and Chemical Oceanography Data Management Office (BCO-DMO) routinely links datasets to cruise identifiers published by the Rolling Deck to Repository (R2R) program. In recent years, facilities have started to publish formal/persistent identifiers, typically Digital Object Identifiers (DOIs), for field deployments including seismic networks, oceanographic cruises, and moored arrays. For example, the EarthChem Library (ECL) publishes a DOI for each dataset which, if it derived from an oceanographic research cruise on a US vessel, is linked to a DOI for the cruise published by R2R. Work is underway to create similar links for the IODP JOIDES Resolution Science Operator (JRSO) and the Continental Scientific Drilling Coordination Office (CSDCO). We present results and lessons learned including a draft schema for publishing field deployments as DataCite DOI records; current practice for linking these DOIs with related identifiers such as Open Researcher and Contributor IDs (ORCIDs), Open Funder Registry (OFR) codes, and International Geo Sample Numbers (IGSNs); and consideration of other identifier types for field deployments such as UUIDs and Handles.

Russian perspectives on elder abuse: an exploratory study.

PubMed

Rinsky, Karina; Malley-Morrison, Kathleen

2006-01-01

The purpose of this exploratory study was to analyze Russian perceptions of elder abuse as reflected in their examples of abusive behavior from an adult child to an aging parent. Also of interest was the possibility of gender differences in the Russian perspectives on elder abuse. The convenience sample consisted of 21 Russian participants (10 males, 10 females, and one without gender identified), who provided examples of extreme, moderate, and mild abuse from an adult child towards an aging parent. Most examples of extreme abuse were forms of physical violence. Typical examples of moderate abuse were instances of psychological aggression-particularly verbal aggression-and neglect. The most common examples of mild abuse were verbal aggression and neglect. One-way analyses of variance revealed statistically significant gender differences in the number of references to psychological aggression in general and to verbal aggression in particular in the examples of moderate abuse, with females giving more examples than males.

Reliable Electronic Text: The Elusive Prerequisite for a Host of Human Language Technologies

DTIC Science & Technology

2010-09-30

is not always the case—for example, ligatures in Latin-fonts, and glyphs in Arabic fonts (King, 2008; Carrier, 2009). This complexity, and others...such effects can render electronic text useless for natural language processing ( NLP ). Typically, file converters do not expose the details of the...the many component NLP technologies typically used inside information extraction and text categorization applications, such as tokenization, part-of

[Diversity and faunal analysis of crustaceans in Potatso National Park, Shangri-La, China].

PubMed

Shu, Shu-Sen; Chen, Fei-Zhou; Yang, Jun-Xing; Yang, Xiao-Jun; Chen, Xiao-Yong

2013-06-01

Potatso National Park was the first national park in mainland China, preceded by the earlier Bitahai Nature Reserve. Located in the northwest of Yunnan and on the southeast of Qinghai-Tibet plateau, Potatso is a typical low latitude and high elevation wetland nature reserve, with large areas of coniferous forest around alpine lakes and both wetland and water area ecosystems. In August, 2011, we undertook a survey of crustaceans in the park, sampling lakes, ponds, streams, and rivers throughout Potatso. We found a total of 29 species (including varieties) belonging to 24 genera and 11 families. Notable discoveries include Parartemiopsis sp, Arctodiaptomus parvispinus and Simocephalus congener, which are the first examples of these species to be recorded in China. Likewise, Gammarus bitaensis is a unique crustacean found only in Potatso National Park and Thermocyclops dumonti and Gammarus paucispinus are both endemic species to northwestern Yunnan. The overall faunal characteristics of crustaceans in the park also revealed several things about Potatso: (1) Cosmopolitan and Palaearctic elements reach 48.27% and 37.93%, clearly showing the Palaearctic element as the dominant fauna; (2) most of the crustacean, such as Arctodiaptomus parvispinus and Gammarus, are typical alpine types, confirming that Potatso has feature typical of alpine and plateau fauna; and (3) the proportion of endemic and rare crustacean species in Potatso National Park is approximately 10%, suggesting that the Potatso National Park in particular and the northwest of Yunnan in general have a unique geological and evolutionary history.

Developing self-regulation in a dysregulating world: Attachment and Biobehavioral Catch-up for a toddler in foster care.

PubMed

Imrisek, Steven D; Castaño, Katerina; Bernard, Kristin

2018-05-16

Toddlers in foster care have typically experienced histories of maltreatment and disruptions in relationships with primary caregivers. As a result, they are at increased risk for developing disorganized attachment and showing emotional, behavioral, and physiological dysregulation. Attachment and Biobehavioral Catch-up for Toddlers in Foster Care (ABC-T) was developed to address the needs of these vulnerable children by supporting foster parents in responding with nurturance to children's distress, following children's lead, and helping children calm when they are becoming overwhelmed or dysregulated. We describe the theoretical underpinnings, evidence base, and clinical approach of ABC-T. Using a case example of Luna and her foster mother Ms. Rosio, we present the typical course of ABC-T, demonstrating core aspects of the model including ongoing observation of parent-child interactions and "in the moment" commenting. Additionally, we consider several challenges to delivering attachment-based interventions in the context of foster care. © 2018 Wiley Periodicals, Inc.

Multidimensional Methods for the Formulation of Biopharmaceuticals and Vaccines

PubMed Central

Maddux, Nathaniel R.; Joshi, Sangeeta B.; Volkin, David B.; Ralston, John P.; Middaugh, C. Russell

2013-01-01

Determining and preserving the higher order structural integrity and conformational stability of proteins, plasmid DNA and macromolecular complexes such as viruses, virus-like particles and adjuvanted antigens is often a significant barrier to the successful stabilization and formulation of biopharmaceutical drugs and vaccines. These properties typically must be investigated with multiple lower resolution experimental methods, since each technique monitors only a narrow aspect of the overall conformational state of a macromolecular system. This review describes the use of empirical phase diagrams (EPDs) to combine large amounts of data from multiple high-throughput instruments and construct a map of a target macromolecule's physical state as a function of temperature, solvent conditions, and other stress variables. We present a tutorial on the mathematical methodology, an overview of some of the experimental methods typically used, and examples of some of the previous major formulation applications. We also explore novel applications of EPDs including potential new mathematical approaches as well as possible new biopharmaceutical applications such as analytical comparability, chemical stability, and protein dynamics. PMID:21647886

Facilitating complex shape drawing in Williams syndrome and typical development.

PubMed

Hudson, Kerry D; Farran, Emily K

2013-07-01

Individuals with Williams syndrome (WS) produce drawings that are disorganised, likely due to an inability to replicate numerous spatial relations between parts. This study attempted to circumvent these drawing deficits in WS when copying complex combinations of one, two and three shapes. Drawing decisions were reduced by introducing a number of facilitators, for example, by using distinct colours and including facilitatory cues on the response sheet. Overall, facilitation improved drawing in the WS group to a comparable level of accuracy as typically developing participants (matched for non-verbal ability). Drawing accuracy was greatest in both groups when planning demands (e.g. starting location, line lengths and changes in direction) were reduced by use of coloured figures and providing easily distinguished and clearly grouped facilitatory cues to form each shape. This study provides the first encouraging evidence to suggest that drawing of complex shapes in WS can be facilitated; individuals with WS might be receptive to remediation programmes for drawing and handwriting. Copyright © 2013 Elsevier Ltd. All rights reserved.

Sleep disorders in Parkinson's disease: a narrative review of the literature.

PubMed

Raggi, Alberto; Bella, Rita; Pennisi, Giovanni; Neri, Walter; Ferri, Raffaele

2013-01-01

Parkinson's disease (PD) is classically considered to be a motor system affliction; however, also non-motor alterations, including sleep disorders, are important features of the disease. The aim of this review is to provide data on sleep disturbances in PD in the following grouping: difficulty initiating sleep, frequent night-time awakening and sleep fragmentation, nocturia, restless legs syndrome/periodic limb movements, sleep breathing disorders, drug induced symptoms, parasomnias associated with rapid eye movements (REM) sleep, sleep attacks, reduced sleep efficiency and excessive daytime sleepiness. Research has characterized some of these disturbances as typical examples of dissociated states of wakefulness and sleep that are admixtures or incomplete declarations of wakefulness, REM sleep, and non-REM (NREM) sleep. Moreover, sleep disorders may precede the typical motor system impairment of PD and their ability to predict disease has important implications for development of neuroprotective treatment; in particular, REM sleep behavior disorder may herald any other clinical manifestation of PD by more than 10 years.

Astronomy Instruction at a Two-year Technical College

NASA Astrophysics Data System (ADS)

Sirola, C. J.

2000-12-01

Over half of all students now begin their college careers at two-year institutions (technical colleges, junior colleges, vocational schools, etc.). This shift in student demographics has broad implications for college-level science instruction, including astronomy instruction. We compare astronomy instruction at two-year institutions to that at traditional four-year universities. A typical two-year school like Tri-County Technical College profers challenges not typically faced by research universities such as lack of research funding, little equipment or facilities, and a generally lower level of student ability. Conversely, a Tri-County Tech offers opportunities such as extensive training in teaching methodologies, a wide range of student demographics, and small classroom sizes. Our students are rarely interested in astronomy as a major, but instead take astronomy to fulfill other major requirements or to ensure the transfer of science credits to four-year universities. We present several examples of astronomy instruction at Tri-County Technical College and discuss our philosophy of teaching in a post-secondary environment whose enrollment is on the rise.

Oxidative aliphatic C-H fluorination with manganese catalysts and fluoride ion

PubMed Central

Liu, Wei; Huang, Xiongyi; Groves, John T

2014-01-01

Fluorination is a reaction that is useful in improving the chemical stability and changing the binding affinity of biologically active compounds. The protocol described here can be used to replace aliphatic, C(sp3)-H hydrogen in small molecules with fluorine. Notably, isolated methylene groups and unactivated benzylic sites are accessible. The method uses readily available manganese porphyrin and manganese salen catalysts and various fluoride ion reagents, including silver fluoride (AgF), tetrabutylammonium fluoride and triethylamine trihydrofluoride (TREAT·HF), as the source of fluorine. Typically, the reactions afford 50–70% yield of mono-fluorinated products in one step. Two representative examples, the fragrance component celestolide and the nonsteroidal anti-inflammatory drug ibuprofen, are described; they produced useful isolated quantities (250–300 mg, ~50% yield) of fluorinated material over periods of 1–8 h. The procedures are performed in a typical fume hood using ordinary laboratory glassware. No special precautions to rigorously exclude water are required. PMID:24177292

Cournot games with network effects for electric power markets

NASA Astrophysics Data System (ADS)

Spezia, Carl John

The electric utility industry is moving from regulated monopolies with protected service areas to an open market with many wholesale suppliers competing for consumer load. This market is typically modeled by a Cournot game oligopoly where suppliers compete by selecting profit maximizing quantities. The classical Cournot model can produce multiple solutions when the problem includes typical power system constraints. This work presents a mathematical programming formulation of oligopoly that produces unique solutions when constraints limit the supplier outputs. The formulation casts the game as a supply maximization problem with power system physical limits and supplier incremental profit functions as constraints. The formulation gives Cournot solutions identical to other commonly used algorithms when suppliers operate within the constraints. Numerical examples demonstrate the feasibility of the theory. The results show that the maximization formulation will give system operators more transmission capacity when compared to the actions of suppliers in a classical constrained Cournot game. The results also show that the profitability of suppliers in constrained networks depends on their location relative to the consumers' load concentration.

Red or uncomfortable eye.

PubMed Central

Davey, C.; Hurwitz, B.

1992-01-01

1. A red, uncomfortable eye may be accompanied by other symptoms such as blurred, decreased, or double vision, haloes, photophobia, pain or discharge. 2. A careful history and brief systematic examination will sort out most problems. 3. Examine eyelids, the conjunctivae and corneas. Checking visual acuity is often important. 4. The most common underlying causes can usually be managed within general practice, though a few patients will require urgent eye assessment, or routine referral to ophthalmic outpatients. 5. The following are typical eye problems which require urgent referral: History of pain as opposed to discomfort, Trauma including foreign bodies, chemicals and suspected penetrating injury, Unexplained drop in visual acuity of two lines or more in a painful eye. Specific conditions: preseptal cellulitis, herpes simplex ulcer, scleritis, orbital cellulitis, herpes zoster, bacterial corneal ulcer, dacryocystitis. 6. The following are typical problems which may require routine referral: Persistence of the problem not relieved by simple measures, Recurrent disorders of uncertain diagnosis, Eyelid swelling such as chalazion, cysts, basal cell carcinoma, Gradual loss of vision, for example cataract, macular degeneration. PMID:1345157

Vertical motion simulator familiarization guide

NASA Technical Reports Server (NTRS)

Danek, George L.

1993-01-01

The Vertical Motion Simulator Familiarization Guide provides a synoptic description of the Vertical Motion Simulator (VMS) and descriptions of the various simulation components and systems. The intended audience is the community of scientists and engineers who employ the VMS for research and development. The concept of a research simulator system is introduced and the building block nature of the VMS is emphasized. Individual sections describe all the hardware elements in terms of general properties and capabilities. Also included are an example of a typical VMS simulation which graphically illustrates the composition of the system and shows the signal flow among the elements and a glossary of specialized terms, abbreviations, and acronyms.

Rapid calibrated high-resolution hyperspectral imaging using tunable laser source

NASA Astrophysics Data System (ADS)

Nguyen, Lam K.; Margalith, Eli

2009-05-01

We present a novel hyperspectral imaging technique based on tunable laser technology. By replacing the broadband source and tunable filters of a typical NIR imaging instrument, several advantages are realized, including: high spectral resolution, highly variable field-of-views, fast scan-rates, high signal-to-noise ratio, and the ability to use optical fiber for efficient and flexible sample illumination. With this technique, high-resolution, calibrated hyperspectral images over the NIR range can be acquired in seconds. The performance of system features will be demonstrated on two example applications: detecting melamine contamination in wheat gluten and separating bovine protein from wheat protein in cattle feed.

Shaping reverberating sound fields with an actively tunable metasurface.

PubMed

Ma, Guancong; Fan, Xiying; Sheng, Ping; Fink, Mathias

2018-06-26

A reverberating environment is a common complex medium for airborne sound, with familiar examples such as music halls and lecture theaters. The complexity of reverberating sound fields has hindered their meaningful control. Here, by combining acoustic metasurface and adaptive wavefield shaping, we demonstrate the versatile control of reverberating sound fields in a room. This is achieved through the design and the realization of a binary phase-modulating spatial sound modulator that is based on an actively reconfigurable acoustic metasurface. We demonstrate useful functionalities including the creation of quiet zones and hotspots in a typical reverberating environment. Copyright © 2018 the Author(s). Published by PNAS.

Learning the available and supplied religious facilities for inpatient services: an example of Taiwan's hospital environment.

PubMed

Yin, Chang-Yi; Tzeng, Huey-Ming

2007-01-01

Holistic nursing care is typically defined to include the assessment and support of a patient's religious background to respect his/her beliefs and promote coping with illness, rehabilitation, and/or dying. An assessment of Taiwanese hospitals reveals variation in the policies and environment supporting religious practices. The survey of nursing executives revealed that only 40% of hospitals had any facilities for religious service or prayer and only 4% employed a chaplain or recruited volunteers to provide religious support. Approximately 20% of hospitals did provide a room for special ceremonies, often used for rituals after patient death.

A boundary element method for steady incompressible thermoviscous flow

NASA Technical Reports Server (NTRS)

Dargush, G. F.; Banerjee, P. K.

1991-01-01

A boundary element formulation is presented for moderate Reynolds number, steady, incompressible, thermoviscous flows. The governing integral equations are written exclusively in terms of velocities and temperatures, thus eliminating the need for the computation of any gradients. Furthermore, with the introduction of reference velocities and temperatures, volume modeling can often be confined to only a small portion of the problem domain, typically near obstacles or walls. The numerical implementation includes higher order elements, adaptive integration and multiregion capability. Both the integral formulation and implementation are discussed in detail. Several examples illustrate the high level of accuracy that is obtainable with the current method.

Energy-saving management modelling and optimization for lead-acid battery formation process

NASA Astrophysics Data System (ADS)

Wang, T.; Chen, Z.; Xu, J. Y.; Wang, F. Y.; Liu, H. M.

2017-11-01

In this context, a typical lead-acid battery producing process is introduced. Based on the formation process, an efficiency management method is proposed. An optimization model with the objective to minimize the formation electricity cost in a single period is established. This optimization model considers several related constraints, together with two influencing factors including the transformation efficiency of IGBT charge-and-discharge machine and the time-of-use price. An example simulation is shown using PSO algorithm to solve this mathematic model, and the proposed optimization strategy is proved to be effective and learnable for energy-saving and efficiency optimization in battery producing industries.

Design of high reliability organizations in health care

PubMed Central

Carroll, J S; Rudolph, J W

2006-01-01

To improve safety performance, many healthcare organizations have sought to emulate high reliability organizations from industries such as nuclear power, chemical processing, and military operations. We outline high reliability design principles for healthcare organizations including both the formal structures and the informal practices that complement those structures. A stage model of organizational structures and practices, moving from local autonomy to formal controls to open inquiry to deep self‐understanding, is used to illustrate typical challenges and design possibilities at each stage. We suggest how organizations can use the concepts and examples presented to increase their capacity to self‐design for safety and reliability. PMID:17142607

Deep Compaction Control of Sandy Soils

NASA Astrophysics Data System (ADS)

Bałachowski, Lech; Kurek, Norbert

2015-02-01

Vibroflotation, vibratory compaction, micro-blasting or heavy tamping are typical improvement methods for the cohesionless deposits of high thickness. The complex mechanism of deep soil compaction is related to void ratio decrease with grain rearrangements, lateral stress increase, prestressing effect of certain number of load cycles, water pressure dissipation, aging and other effects. Calibration chamber based interpretation of CPTU/DMT can be used to take into account vertical and horizontal stress and void ratio effects. Some examples of interpretation of soundings in pre-treated and compacted sands are given. Some acceptance criteria for compaction control are discussed. The improvement factors are analysed including the normalised approach based on the soil behaviour type index.

CFCS and electric chillers: Selection of large-capacity water chillers in the 1990s. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Niess, R.C.

1992-03-01

This handbook offers a single source of useful information for understanding CFC and HCFC phaseout issues and selecting large-capacity water chillers for cooling commercial buildings. It evaluates the performance of electric, absorption, and natural-gas-engine driven water chillers. An economic evaluation checklist and example are included, using the EPRI COMTECH screening tool. Peak shaving with gas chillers and load shifting with chilled water storage are examined. The handbook, written for a diverse audience, covers chiller hardware, function, performance, and typical installed costs. It provides guidelines and checklists for chiller selection, economic comparison, and operation and maintenance.

CFCS and electric chillers: Selection of large-capacity water chillers in the 1990s

DOE Office of Scientific and Technical Information (OSTI.GOV)

Niess, R.C.

1992-03-01

This handbook offers a single source of useful information for understanding CFC and HCFC phaseout issues and selecting large-capacity water chillers for cooling commercial buildings. It evaluates the performance of electric, absorption, and natural-gas-engine driven water chillers. An economic evaluation checklist and example are included, using the EPRI COMTECH screening tool. Peak shaving with gas chillers and load shifting with chilled water storage are examined. The handbook, written for a diverse audience, covers chiller hardware, function, performance, and typical installed costs. It provides guidelines and checklists for chiller selection, economic comparison, and operation and maintenance.

Adolescent development and risk of injury: Using developmental science to improve interventions

PubMed Central

Johnson, Sara B.; Jones, Vanya C.

2015-01-01

In adolescence, there is a complex interaction among physical, cognitive, and psychosocial developmental processes, culminating in greater risk-taking and novelty-seeking. Concurrently, adolescents face an increasingly demanding environment, which results in heightened vulnerability to injury. In this paper, we provide an overview of developmental considerations for adolescent injury interventions based on developmental science including findings from behavioral neuroscience and psychology. We examine the role that typical developmental processes play in the way adolescents perceive and respond to risk and how this integrated body of developmental research adds to our understanding of how to do injury prevention with adolescents. We then highlight strategies to improve the translation of developmental research into adolescent injury prevention practice, calling on examples of existing interventions including graduated driver licensing. PMID:20876765

Solid-state energy storage module employing integrated interconnect board

DOEpatents

Rouillard, Jean; Comte, Christophe; Daigle, Dominik; Hagen, Ronald A.; Knudson, Orlin B.; Morin, Andre; Ranger, Michel; Ross, Guy; Rouillard, Roger; St-Germain, Philippe; Sudano, Anthony; Turgeon, Thomas A.

2003-11-04

The present invention is directed to an improved electrochemical energy storage device. The electrochemical energy storage device includes a number of solid-state, thin-film electrochemical cells which are selectively interconnected in series or parallel through use of an integrated interconnect board. The interconnect board is typically disposed within a sealed housing which also houses the electrochemical cells, and includes a first contact and a second contact respectively coupled to first and second power terminals of the energy storage device. The interconnect board advantageously provides for selective series or parallel connectivity with the electrochemical cells, irrespective of electrochemical cell position within the housing. Fuses and various electrical and electromechanical devices, such as bypass, equalization, and communication devices for example, may also be mounted to the interconnect board and selectively connected to the electrochemical cells.

The NASA Space Launch System Program Systems Engineering Approach for Affordability

NASA Technical Reports Server (NTRS)

Hutt, John J.; Whitehead, Josh; Hanson, John

2017-01-01

The National Aeronautics and Space Administration is currently developing the Space Launch System to provide the United States with a capability to launch large Payloads into Low Earth orbit and deep space. One of the development tenets of the SLS Program is affordability. One initiative to enhance affordability is the SLS approach to requirements definition, verification and system certification. The key aspects of this initiative include: 1) Minimizing the number of requirements, 2) Elimination of explicit verification requirements, 3) Use of certified models of subsystem capability in lieu of requirements when appropriate and 4) Certification of capability beyond minimum required capability. Implementation of each aspect is described and compared to a "typical" systems engineering implementation, including a discussion of relative risk. Examples of each implementation within the SLS Program are provided.

Simulated Data for High Temperature Composite Design

NASA Technical Reports Server (NTRS)

Chamis, Christos C.; Abumeri, Galib H.

2006-01-01

The paper describes an effective formal method that can be used to simulate design properties for composites that is inclusive of all the effects that influence those properties. This effective simulation method is integrated computer codes that include composite micromechanics, composite macromechanics, laminate theory, structural analysis, and multi-factor interaction model. Demonstration of the method includes sample examples for static, thermal, and fracture reliability for a unidirectional metal matrix composite as well as rupture strength and fatigue strength for a high temperature super alloy. Typical results obtained for a unidirectional composite show that the thermal properties are more sensitive to internal local damage, the longitudinal properties degrade slowly with temperature, the transverse and shear properties degrade rapidly with temperature as do rupture strength and fatigue strength for super alloys.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farmer, J.D.; Ott, E.; Yorke, J.A.

Dimension is perhaps the most basic property of an attractor. In this paper we discuss a variety of different definitions of dimension, compute their values for a typical example, and review previous work on the dimension of chaotic attractors. The relevant definitions of dimension are of two general types, those that depend only on metric properties, and those that depend on probabilistic properties (that is, they depend on the frequency with which a typical trajectory visits different regions of the attractor). Both our example and the previous work that we review support the conclusion that all of the probabilistic dimensionsmore » take on the same value, which we call the dimension of the natural measure, and all of the metric dimensions take on a common value, which we call the fractal dimension. Furthermore, the dimension of the natural measure is typically equal to the Lyapunov dimension, which is defined in terms of Lyapunov numbers, and thus is usually far easier to calculate than any other definition. Because it is computable and more physically relevant, we feel that the dimension of the natural measure is more important than the fractal dimension.« less

THE CLEAN ENERGY-ENVIRONMENT GUIDE TO ACTION ...

EPA Pesticide Factsheets

The Guide to Action identifies and describes sixteen clean energy policies and strategies that are delivering economic and environmental results for states. For each policy, the Guide describes: Objectives and benefits of the policy; Examples of states that have implemented the policy; Responsibilities of key players at the state level, including typical roles of the main stakeholders; Opportunities to coordinate implementation with other federal and state policies, partnerships and technical assistance resources; Best practices for policy design, implementation, and evaluation, including state examples; Action steps for states to take when adopting or modifying their clean energy policies, based on existing state experiences; Resources for additional information on individual state policies, legislative and regulatory language, and analytical tools and methods. States participating in the Clean Energy-Environment State Partnership Program will use the Guide to Action to: Develop their own Clean Energy-Environment Action Plan that is appropriate to their state; Identify the roles and responsibilities of key decision-makers, such as environmental regulators, state legislatures, public utility commissioners, and state energy offices; Access and apply technical assistance resources, models, and tools available for state-specific analyses and program implementation; and Learn from each other as they develop their own clean energy programs and policies.

War on Carcinogens: industry disputes human relevance of chemicals causing cancer in laboratory animals based on unproven hypotheses, using kidney tumors as an example.

PubMed

Melnick, Ronald L; Ward, Jerrold M; Huff, James

2013-01-01

Evidence from studies in animals is essential for identifying chemicals likely to cause or contribute to many diseases in humans, including cancers. Yet, to avoid or delay the implementation of protective public health standards, the chemical industry typically denies cancer causation by agents they produce. The spurious arguments put forward to discount human relevance are often based on inadequately tested hypotheses or modes of action that fail to meet Bradford Hill criteria for causation. We term the industry attacks on the relevance of animal cancer findings as the "War on Carcinogens." Unfortunately, this tactic has been effective in preventing timely and appropriate health protective actions on many economically important yet carcinogenic chemicals, including: arsenic, asbestos, benzene, 1,3-butadiene, formaldehyde, methylene chloride, phthalates, tobacco usage, trichloroethylene [TCE], and others. Recent examples of the "War on Carcinogens" are chemicals causing kidney cancer in animals. Industry consultants argue that kidney tumor findings in rats with exacerbated chronic progressive nephropathy (CPN) are not relevant to humans exposed to these chemicals. We dispute and dismiss this unsubstantiated claim with data and facts, and divulge unprofessional actions from a leading toxicology journal.

NASA/State Education Cooperation

NASA Technical Reports Server (NTRS)

1990-01-01

NASA is cooperating with state departments of education in a number of special education programs. An example is Maryland Summer Centers for Gifted and Talented Students sponsored by the Maryland State Department of Education. Some 2,600 students participated in the 1990 program. One of the 12 centers is the Center for Space Science and Technology at Goddard Space Flight Center, which provides instruction to students of the 9-12 grade level. This center is operated by a three organization partnership that includes the Maryland State Department of Education, the University of Maryland and Goddard Space Flight Center, which hosts the instructional program and provides volunteer scientists and engineers as instructors. Typical two-week space intern program includes panel discussions, lectures, tours, field trips and hands-on activity focusing on various space science topics. Senior high students benefit from a one-to-one mentor relationship with a volunteer scientist or engineer. Another example was the Paducah (Kentucky) NASA Community Involvement Project, a joint educational effort of Langley and Lewis Research Centers, Marshall Space Flight Center, the Kentucky Department of Education, the City of Paducah and Paducah Independent Schools. It was a 16 day exposition/symposium featuring seminars on space subjects.

Lit appearance modeling of illumination systems

NASA Astrophysics Data System (ADS)

Koshel, R. John

2002-09-01

In illumination systems the look and feel are often more important than objective criterion, such as uniformity and efficiency. The reason for this is two fold: the lit appearance often sells an item and substantial variation in the illumination distribution (up to 50%) over a broad region is not noticeable to an observer. Therefore, subjective criterion, such as the lit appearance, typically plays a crucial role in the development of an illumination system. Additionally, by using computer models to ascertain the lit appearance before manufacture of the system, it allows the designer to modify the system while not demanding investment to produce prototypes. I discuss methods of determining the lit appearance for illumination systems. This modeling includes the inclusion of material and surface properties, such as surface finish, spectral transmission, and internal scattering; the response of the human eye; and the amount of rays that must be traced. By archiving the ray data, animations as a function of position and angle can be developed. Examples are developed to highlight the utility of this technique. These examples include taillights for the automotive industry and a backlit LCD screen for a laptop. Animations of these models demonstrate their luminance.

42 CFR 414.40 - Coding and ancillary policies.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Global surgery policy (for example, post- and pre-operative periods and services, and intra-operative..., which typically comprise a technical component (the taking of the test) and a professional component...

42 CFR 414.40 - Coding and ancillary policies.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Global surgery policy (for example, post- and pre-operative periods and services, and intra-operative..., which typically comprise a technical component (the taking of the test) and a professional component...

42 CFR 414.40 - Coding and ancillary policies.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Global surgery policy (for example, post- and pre-operative periods and services, and intra-operative..., which typically comprise a technical component (the taking of the test) and a professional component...

42 CFR 414.40 - Coding and ancillary policies.

Code of Federal Regulations, 2011 CFR

2011-10-01

... surgery policy (for example, post- and pre-operative periods and services, and intra-operative services... typically comprise a technical component (the taking of the test) and a professional component (the...

42 CFR 414.40 - Coding and ancillary policies.

Code of Federal Regulations, 2010 CFR

2010-10-01

... surgery policy (for example, post- and pre-operative periods and services, and intra-operative services... typically comprise a technical component (the taking of the test) and a professional component (the...

Optimal post-experiment estimation of poorly modeled dynamic systems

NASA Technical Reports Server (NTRS)

Mook, D. Joseph

1988-01-01

Recently, a novel strategy for post-experiment state estimation of discretely-measured dynamic systems has been developed. The method accounts for errors in the system dynamic model equations in a more general and rigorous manner than do filter-smoother algorithms. The dynamic model error terms do not require the usual process noise assumptions of zero-mean, symmetrically distributed random disturbances. Instead, the model error terms require no prior assumptions other than piecewise continuity. The resulting state estimates are more accurate than filters for applications in which the dynamic model error clearly violates the typical process noise assumptions, and the available measurements are sparse and/or noisy. Estimates of the dynamic model error, in addition to the states, are obtained as part of the solution of a two-point boundary value problem, and may be exploited for numerous reasons. In this paper, the basic technique is explained, and several example applications are given. Included among the examples are both state estimation and exploitation of the model error estimates.

Three-dimensional analysis of anisotropic spatially reinforced structures

NASA Technical Reports Server (NTRS)

Bogdanovich, Alexander E.

1993-01-01

The material-adaptive three-dimensional analysis of inhomogeneous structures based on the meso-volume concept and application of deficient spline functions for displacement approximations is proposed. The general methodology is demonstrated on the example of a brick-type mosaic parallelepiped arbitrarily composed of anisotropic meso-volumes. A partition of each meso-volume into sub-elements, application of deficient spline functions for a local approximation of displacements and, finally, the use of the variational principle allows one to obtain displacements, strains, and stresses at anypoint within the structural part. All of the necessary external and internal boundary conditions (including the conditions of continuity of transverse stresses at interfaces between adjacent meso-volumes) can be satisfied with requisite accuracy by increasing the density of the sub-element mesh. The application of the methodology to textile composite materials is described. Several numerical examples for woven and braided rectangular composite plates and stiffened panels under transverse bending are considered. Some typical effects of stress concentrations due to the material inhomogeneities are demonstrated.

A performance comparison of the IBM RS/6000 and the Astronautics ZS-1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, W.M.; Abraham, S.G.; Davidson, E.S.

1991-01-01

Concurrent uniprocessor architectures, of which vector and superscalar are two examples, are designed to capitalize on fine-grain parallelism. The authors have developed a performance evaluation method for comparing and improving these architectures, and in this article they present the methodology and a detailed case study of two machines. The runtime of many programs is dominated by time spent in loop constructs - for example, Fortran Do-loops. Loops generally comprise two logical processes: The access process generates addresses for memory operations while the execute process operates on floating-point data. Memory access patterns typically can be generated independently of the data inmore » the execute process. This independence allows the access process to slip ahead, thereby hiding memory latency. The IBM 360/91 was designed in 1967 to achieve slip dynamically, at runtime. One CPU unit executes integer operations while another handles floating-point operations. Other machines, including the VAX 9000 and the IBM RS/6000, use a similar approach.« less

Phase and composition controllable synthesis of cobalt manganese spinel nanoparticles towards efficient oxygen electrocatalysis.

PubMed

Li, Chun; Han, Xiaopeng; Cheng, Fangyi; Hu, Yuxiang; Chen, Chengcheng; Chen, Jun

2015-06-04

Spinel-type oxides are technologically important in many fields, including electronics, magnetism, catalysis and electrochemical energy storage and conversion. Typically, these materials are prepared by conventional ceramic routes that are energy consuming and offer limited control over shape and size. Moreover, for mixed-metal oxide spinels (for example, Co(x)Mn(3-x)O4), the crystallographic phase sensitively correlates with the metal ratio, posing great challenges to synthesize active product with simultaneously tuned phase and composition. Here we report a general synthesis of ultrasmall cobalt manganese spinels with tailored structural symmetry and composition through facile solution-based oxidation-precipitation and insertion-crystallization process at modest condition. As an example application, the nanocrystalline spinels catalyse the oxygen reduction/evolution reactions, showing phase and composition co-dependent performance. Furthermore, the mild synthetic strategy allows the formation of homogeneous and strongly coupled spinel/carbon nanocomposites, which exhibit comparable activity but superior durability to Pt/C and serve as efficient catalysts to build rechargeable Zn-air and Li-air batteries.

Guidelines for Developing Spacecraft Structural Requirements: A Thermal and Environmental Perspective

NASA Technical Reports Server (NTRS)

Holladay, Jon; Day, Greg; Gill, Larry

2004-01-01

Spacecraft are typically designed with a primary focus on weight in order to meet launch vehicle performance parameters. However, for pressurized and/or man-rated spacecraft, it is also necessary to have an understanding of the vehicle operating environments to properly size the pressure vessel. Proper sizing of the pressure vessel requires an understanding of the space vehicle's life cycle and compares the physical design optimization (weight and launch "cost") to downstream operational complexity and total life cycle cost. This paper will provide an overview of some major environmental design drivers and provide examples for calculating the optimal design pressure versus a selected set of design parameters related to thermal and environmental perspectives. In addition, this paper will provide a generic set of cracking pressures for both positive and negative pressure relief valves that encompasses worst case environmental effects for a variety of launch / landing sites. Finally, several examples are included to highlight pressure relief set points and vehicle weight impacts for a selected set of orbital missions.

Importance of public relations in recycling strategies: principles and case studies.

PubMed

Salhofer, Stefan; Isaac, Nicole A

2002-07-01

The separate collection of waste, and especially of recyclables with specific collection systems, would not be possible without the involvement of the users. Apart from the physical installations such as collection containers, collection points, etc., the motivation of the users is an essential component. Motivation can be reinforced through public relations work. In addition to the underlying technical considerations, this paper describes the difference between communication in general and public relations and specifically examines public involvement in recycling. Through the use of examples, we look at the targeted users and typical media employed. Furthermore, we analyzes the development of public involvement. The examples show that public relations for recycling strategies relies to a great extent on attitudes, habits, and access to the target group. Thus, standardized procedures cannot be developed. For these reasons, public relation activities must be planned carefully and professionally and include an analysis of the target group, choice of media, and verification of success.

Imaging in conjunction with physical therapy in management of a patient with history of thoracic tumour

PubMed Central

Rendeiro, Daniel G.; Deyle, Gail D.; Boissonnault, William G.

2015-01-01

Background: Physical therapy care for musculoskeletal conditions includes an ongoing process that systematically considers and prioritises diagnostic hypotheses. These diagnostic hypotheses include those that are typical for common musculoskeletal conditions, and must also include more rare conditions that would require care outside the scope of practice of the physical therapist. When additional screening is required, physical therapists collaborate with other providers or directly order the appropriate tests to rule out suspected pathology. Case Description: This article illustrates the use of musculoskeletal imaging ordered by a physical therapist to guide ongoing management of a patient with back pain and a history of cancer. Outcomes: The patient successfully returned to moderate-intensity sport activities after a course of physical therapy. Discussion: This case provides an example of how clinical diagnostic reasoning combined with clinical privileges to order musculoskeletal imaging can facilitate diagnostic accuracy in a timely and cost-efficient manner. PMID:26309382

Nuclear and radiological terrorism: continuing education article.

PubMed

Anderson, Peter D; Bokor, Gyula

2013-06-01

Terrorism involving radioactive materials includes improvised nuclear devices, radiation exposure devices, contamination of food sources, radiation dispersal devices, or an attack on a nuclear power plant or a facility/vehicle that houses radioactive materials. Ionizing radiation removes electrons from atoms and changes the valence of the electrons enabling chemical reactions with elements that normally do not occur. Ionizing radiation includes alpha rays, beta rays, gamma rays, and neutron radiation. The effects of radiation consist of stochastic and deterministic effects. Cancer is the typical example of a stochastic effect of radiation. Deterministic effects include acute radiation syndrome (ARS). The hallmarks of ARS are damage to the skin, gastrointestinal tract, hematopoietic tissue, and in severe cases the neurovascular structures. Radiation produces psychological effects in addition to physiological effects. Radioisotopes relevant to terrorism include titrium, americium 241, cesium 137, cobalt 60, iodine 131, plutonium 238, califormium 252, iridium 192, uranium 235, and strontium 90. Medications used for treating a radiation exposure include antiemetics, colony-stimulating factors, antibiotics, electrolytes, potassium iodine, and chelating agents.

Role of Donor-Acceptor Interactions in the Sorption of TNT and Other Nitroaromatics from Solution

DTIC Science & Technology

1991-09-01

Leggett isotherms . Nevertheless, these single-valued sorption 1986, Yinon and Hwang 1986), industrial hygiene coefficients can be considered somewhat...Patrick 1990). In all cases similar sorption isotherms were reported, some typical examples of which are shown in Figure 1. They 40- are...is that two (or more) mechanisms operate simultaneously-one with lower capacity and higher Figure 1. Some typical TNT sorption isotherms . (C, and

Effects of Trichothecenes on Cardiac Cell Electrical Function

DTIC Science & Technology

1985-12-13

Figure 8 illustrate the typical effects of trichothecene mycotoxins in canine ventricular cells. T-2 tetraol, for example, reduced the total duration of...potentials from false tendon cells and ventricular muscle cells (shown in Figure 8) illustrate the typical effects of trichothecene mycotoxins in canine...the plateau (arrow) from 14 my to 4 my. Table 6 summarizes the effects of T-2 mycotoxin on the action potential parameters of false tendon cells and

A Case Study of a Combat Aircraft’s Single Hit Vulnerability

DTIC Science & Technology

1986-09-01

Survivability Life Cycle 21 3.2 Interfaces of the FMECA Process 27 3.3 Example FMEA Format 29 3.4 Example DMEA Matrix 33 3.5 Example Disablement Diagram 34...Typical Hi-Hi/Hi-Hi Mission 58 5.5 A-20 Conceptual Tactics 60 7.1 A-20 Fuel System 73 7.2 A-20 Hydraulics System 75 7.3 A-20 Flight Controls System 77 7.4...effect severity. The FMECA procedure is performed in two steps, (1) a Fail- ure Mode and Effects Analysis ( FMEA ) and (2) a Damage Mode and Effects

C-band radar calibration using GEOS-3

NASA Technical Reports Server (NTRS)

Krabill, W. B.; Martin, C. F.

1978-01-01

The various methods of determining tracking radar measurement error parameters are described, along with the projected accuracy of results. Typical examples and results for calibration of radars tracking the GEOS-3 satellite are presented.

Development of light and small airplanes

NASA Technical Reports Server (NTRS)

Lachmann, G

1926-01-01

The author has endeavored to select only the most important lines of development and has limited the description of individual airplanes to a few typical examples. Comparisons are presented between German and foreign accomplishments.

Error assessment of biogeochemical models by lower bound methods (NOMMA-1.0)

NASA Astrophysics Data System (ADS)

Sauerland, Volkmar; Löptien, Ulrike; Leonhard, Claudine; Oschlies, Andreas; Srivastav, Anand

2018-03-01

Biogeochemical models, capturing the major feedbacks of the pelagic ecosystem of the world ocean, are today often embedded into Earth system models which are increasingly used for decision making regarding climate policies. These models contain poorly constrained parameters (e.g., maximum phytoplankton growth rate), which are typically adjusted until the model shows reasonable behavior. Systematic approaches determine these parameters by minimizing the misfit between the model and observational data. In most common model approaches, however, the underlying functions mimicking the biogeochemical processes are nonlinear and non-convex. Thus, systematic optimization algorithms are likely to get trapped in local minima and might lead to non-optimal results. To judge the quality of an obtained parameter estimate, we propose determining a preferably large lower bound for the global optimum that is relatively easy to obtain and that will help to assess the quality of an optimum, generated by an optimization algorithm. Due to the unavoidable noise component in all observations, such a lower bound is typically larger than zero. We suggest deriving such lower bounds based on typical properties of biogeochemical models (e.g., a limited number of extremes and a bounded time derivative). We illustrate the applicability of the method with two real-world examples. The first example uses real-world observations of the Baltic Sea in a box model setup. The second example considers a three-dimensional coupled ocean circulation model in combination with satellite chlorophyll a.

On the relationships between sprite production and convective evolution

NASA Astrophysics Data System (ADS)

Lang, T. J.

2017-12-01

Sprites can occur in the upper atmosphere when powerful lightning creates a large charge moment change (CMC) within a thunderstorm. A growing body of research supports the inference that sprite production and convective vigor are inversely related in mature storms. In the most typical scenario, long-lived organized convection first creates an adjacent region of stratiform precipitation filled with horizontally broad layers of charge. Once the main convective region enters a weakening phase, spatially larger lightning flashes become more prevalent, and these are subsequently more likely to tap the stratiform charge. This makes the occurrence of large-CMC cloud-to-ground (CG) lightning and thus sprites more likely. This process is stochastic, however. For instance, ionospheric conditions are themselves variable and can influence the likelihood of sprites. In addition, convective morphology and microphysical/electrical structure can modulate lightning characteristics, including the frequency and location of CG occurrence, flash polarity, the amount of continuing current, the altitudes of charge layers tapped, etc. This can lead to a broad variety of sprite-producing storms, including anomalously charged convection (i.e., dominant positive charge near -20 Celsius rather than the more typical negative), abnormally small convective systems producing sprites, wintertime sprites, and other interesting examples. A review of past and present research into these and other relationships between sprites and convection will be presented, and future opportunities to study these relationships (including from spaceborne platforms) will be highlighted.

Specificity revisited and updated.

PubMed

Paulley, J W

1991-01-01

Typicality is probably a better representation of Alexander, Dunbar and others' conclusions than specificity, which was always too absolute a term. As such it became a valid cause of objection by opponents. No genuine attempts to repeat the original studies have been made and most of the original opposition to the concept is now acknowledged as invalid. Typicality (specificity) in psychosomatic disorders appears to be conferred by coping mechanisms acquired through interaction with mother and early surrogates in infancy and childhood as a means of reducing tensions and restoration of homeostatic emotional equilibrium. Psychosomatic medicine patients share one such mechanism, notably superstability/alexythymia, but contained within it are coping mechanisms typical for differing disorders. Examples are listed, and also mention of typicality of recurrently provocative life events/situations. Until typicality is appreciated, taught, learned and practised, success in management of psychosomatic disorders will be limited. The current bio-psycho-social approach is too imprecise.

Research status of wave energy conversion (WEC) device of raft structure

NASA Astrophysics Data System (ADS)

Dong, Jianguo; Gao, Jingwei; Tao, Liang; Zheng, Peng

2017-10-01

This paper has briefly described the concept of wave energy generation and six typical conversion devices. As for raft structure, detailed analysis is provided from its development process to typical devices. Taking the design process and working principle of Plamis as an example, the general principle of raft structure is briefly described. After that, a variety of raft structure models are introduced. Finally, the advantages and disadvantages, and development trend of raft structure are pointed out.

Developing a Web-Based Parking Management System

DOT National Transportation Integrated Search

2010-05-01

Visitors constitute an important component of a university business. Given that visitors are typically unfamiliar with university campus layouts, special assistance may be needed to assist them with their parking needs. For example, personal and foll...

Is Science Biased Toward Natural?

EPA Science Inventory

Having widely available, accurate, understandable, and unbiased scientific information is central to the successful resolution of the typically contentious, divisive, and litigious natural resource policy issue. Three examples are offered to illustrate how science is often misus...

Variational Problems with Long-Range Interaction

NASA Astrophysics Data System (ADS)

Soave, Nicola; Tavares, Hugo; Terracini, Susanna; Zilio, Alessandro

2018-06-01

We consider a class of variational problems for densities that repel each other at a distance. Typical examples are given by the Dirichlet functional and the Rayleigh functional D(u) = \\sum_{i=1}^k \\int_{Ω} |\

The role of semantic complexity in treatment of naming deficits: training semantic categories in fluent aphasia by controlling exemplar typicality.

PubMed

Kiran, Swathi; Thompson, Cynthia K

2003-06-01

The effect of typicality of category exemplars on naming was investigated using a single subject experimental design across participants and behaviors in 4 patients with fluent aphasia. Participants received a semantic feature treatment to improve naming of either typical or atypical items within semantic categories, while generalization was tested to untrained items of the category. The order of typicality and category trained was counterbalanced across participants. Results indicated that patients trained on naming of atypical exemplars demonstrated generalization to naming of intermediate and typical items. However, patients trained on typical items demonstrated no generalized naming effect to intermediate or atypical examples. Furthermore, analysis of errors indicated an evolution of errors throughout training, from those with no apparent relationship to the target to primarily semantic and phonemic paraphasias. Performance on standardized language tests also showed changes as a function of treatment. Theoretical and clinical implications regarding the impact of considering semantic complexity on rehabilitation of naming deficits in aphasia are discussed.

The role of semantic complexity in treatment of naming deficits: training semantic categories in fluent aphasia by controlling exemplar typicality.

PubMed

Kiran, Swathi; Thompson, Cynthia K

2003-08-01

The effect of typicality of category exemplars on naming was investigated using a single subject experimental design across participants and behaviors in 4 patients with fluent aphasia. Participants received a semantic feature treatment to improve naming of either typical or atypical items within semantic categories, while generalization was tested to untrained items of the category. The order of typicality and category trained was counterbalanced across participants. Results indicated that patients trained on naming of atypical exemplars demonstrated generalization to naming of intermediate and typical items. However, patients trained on typical items demonstrated no generalized naming effect to intermediate or atypical examples. Furthermore, analysis of errors indicated an evolution of errors throughout training, from those with no apparent relationship to the target to primarily semantic and phonemic paraphasias. Performance on standardized language tests also showed changes as a function of treatment. Theoretical and clinical implications regarding the impact of considering semantic complexity on rehabilitation of naming deficits in aphasia are discussed.

Algebraic integrability: a survey.

PubMed

Vanhaecke, Pol

2008-03-28

We give a concise introduction to the notion of algebraic integrability. Our exposition is based on examples and phenomena, rather than on detailed proofs of abstract theorems. We mainly focus on algebraic integrability in the sense of Adler-van Moerbeke, where the fibres of the momentum map are affine parts of Abelian varieties; as it turns out, most examples from classical mechanics are of this form. Two criteria are given for such systems (Kowalevski-Painlevé and Lyapunov) and each is illustrated in one example. We show in the case of a relatively simple example how one proves algebraic integrability, starting from the differential equations for the integrable vector field. For Hamiltonian systems that are algebraically integrable in the generalized sense, two examples are given, which illustrate the non-compact analogues of Abelian varieties which typically appear in such systems.

Conjunctive programming: An interactive approach to software system synthesis

NASA Technical Reports Server (NTRS)

Tausworthe, Robert C.

1992-01-01

This report introduces a technique of software documentation called conjunctive programming and discusses its role in the development and maintenance of software systems. The report also describes the conjoin tool, an adjunct to assist practitioners. Aimed at supporting software reuse while conforming with conventional development practices, conjunctive programming is defined as the extraction, integration, and embellishment of pertinent information obtained directly from an existing database of software artifacts, such as specifications, source code, configuration data, link-edit scripts, utility files, and other relevant information, into a product that achieves desired levels of detail, content, and production quality. Conjunctive programs typically include automatically generated tables of contents, indexes, cross references, bibliographic citations, tables, and figures (including graphics and illustrations). This report presents an example of conjunctive programming by documenting the use and implementation of the conjoin program.

Anti-arrhythmic strategies for atrial fibrillation

PubMed Central

Grandi, Eleonora; Maleckar, Mary M.

2016-01-01

Atrial fibrillation (AF), the most common cardiac arrhythmia, is associated with increased risk of cerebrovascular stroke, and with several other pathologies, including heart failure. Current therapies for AF are targeted at reducing risk of stroke (anticoagulation) and tachycardia-induced cardiomyopathy (rate or rhythm control). Rate control, typically achieved by atrioventricular nodal blocking drugs, is often insufficient to alleviate symptoms. Rhythm control approaches include antiarrhythmic drugs, electrical cardioversion, and ablation strategies. Here, we offer several examples of how computational modeling can provide a quantitative framework for integrating multi scale data to: (a) gain insight into multi-scale mechanisms of AF; (b) identify and test pharmacological and electrical therapy and interventions; and (c) support clinical decisions. We review how modeling approaches have evolved and contributed to the research pipeline and preclinical development and discuss future directions and challenges in the field. PMID:27612549

Human exposures to monomers resulting from consumer contact with polymers.

PubMed

Leber, A P

2001-06-01

Many consumer products are composed completely, or in part, of polymeric materials. Direct or indirect human contact results in potential exposures to monomers as a result of migrations of trace amounts from the polymeric matrix into foods, into the skin or other bodily surfaces. Typically, residual monomer levels in these polymers are <100 p.p.m., and represent exposures well below those observable in traditional toxicity testing. These product applications thus require alternative methods for evaluating health risks relating to monomer exposures. A typical approach includes: (a) assessment of potential human contacts for specific polymer uses; (b) utilization of data from toxicity testing of pure monomers, e.g. cancer bioassay results; and (c) mathematical risk assessment methods. Exposure potentials are measured in one of two analytical procedures: (1) migration of monomer from polymer into a simulant solvent (e.g. alcohol, acidic water, vegetable oil) appropriate for the intended use of the product (e.g. beer cans, food jars, packaging adhesive, dairy hose); or (2) total monomer content of the polymer, providing worse-case values for migratable monomer. Application of toxicity data typically involves NOEL or benchmark values for non-cancer endpoints, or tumorigenicity potencies for monomers demonstrated to be carcinogens. Risk assessments provide exposure 'safety margin' ratios between levels that: (1) are projected to be safe according to toxicity information, and (2) are potential monomer exposures posed by the intended use of the consumer product. This paper includes an example of a health risk assessment for a chewing gum polymer for which exposures to trace levels of butadiene monomer occur.

A phase-transition model for the rise and collapse of ancient civilizations: A pre-ceramic Andean case study

NASA Astrophysics Data System (ADS)

Flores, J. C.

2015-12-01

For ancient civilizations, the shift from disorder to organized urban settlements is viewed as a phase-transition simile. The number of monumental constructions, assumed to be a signature of civilization processes, corresponds to the order parameter, and effective connectivity becomes related to the control parameter. Based on parameter estimations from archaeological and paleo-climatological data, this study analyzes the rise and fall of the ancient Caral civilization on the South Pacific coast during a period of small ENSO fluctuations (approximately 4500 BP). Other examples considered include civilizations on Easter Island and the Maya Lowlands. This work considers a typical nonlinear third order evolution equation and numerical simulations.

System analysis approach to deriving design criteria (Loads) for Space Shuttle and its payloads. Volume 2: Typical examples

NASA Technical Reports Server (NTRS)

Ryan, R. S.; Bullock, T.; Holland, W. B.; Kross, D. A.; Kiefling, L. A.

1981-01-01

The achievement of an optimized design from the system standpoint under the low cost, high risk constraints of the present day environment was analyzed. Space Shuttle illustrates the requirement for an analysis approach that considers all major disciplines (coupling between structures control, propulsion, thermal, aeroelastic, and performance), simultaneously. The Space Shuttle and certain payloads, Space Telescope and Spacelab, are examined. The requirements for system analysis approaches and criteria, including dynamic modeling requirements, test requirements, control requirements, and the resulting design verification approaches are illustrated. A survey of the problem, potential approaches available as solutions, implications for future systems, and projected technology development areas are addressed.

Fast Implementation of Quantum Phase Gates and Creation of Cluster States via Transitionless Quantum Driving

NASA Astrophysics Data System (ADS)

Zhang, Chun-Ling; Liu, Wen-Wu

2018-05-01

In this paper, combining transitionless quantum driving and quantum Zeno dynamics, we propose an efficient scheme to fast implement a two-qubit quantum phase gate which can be used to generate cluster state of atoms trapped in distant cavities. The influence of various of various error sources including spontaneous emission and photon loss on the fidelity is analyzed via numerical simulation. The results show that this scheme not only takes less time than adiabatic scheme but also is not sensitive to both error sources. Additionally, a creation of N-atom cluster states is put forward as a typical example of the applications of the phase gates.

Communication and control in an integrated manufacturing system

NASA Technical Reports Server (NTRS)

Shin, Kang G.; Throne, Robert D.; Muthuswamy, Yogesh K.

1987-01-01

Typically, components in a manufacturing system are all centrally controlled. Due to possible communication bottlenecking, unreliability, and inflexibility caused by using a centralized controller, a new concept of system integration called an Integrated Multi-Robot System (IMRS) was developed. The IMRS can be viewed as a distributed real time system. Some of the current research issues being examined to extend the framework of the IMRS to meet its performance goals are presented. These issues include the use of communication coprocessors to enhance performance, the distribution of tasks and the methods of providing fault tolerance in the IMRS. An application example of real time collision detection, as it relates to the IMRS concept, is also presented and discussed.

Hypochlorous acid-activated carbon: an oxidizing agent capable of producing hydroxylated polychlorinated biphenyls.

PubMed Central

Voudrias, E A; Larson, R A; Snoeyink, V L; Chen, A S; Stapleton, P L

1986-01-01

Granular activated carbon (GAC), in the presence of dilute aqueous hypochlorite solutions typical of those used in water treatment, was converted to a reagent capable of carrying out free-radical coupling reactions and other oxidations of dilute aqueous solutions of phenols. The products included biphenyls with chlorine and hydroxyl substitution (hydroxylated polychlorinated biphenyls). For example, 2,4-dichlorophenol, a common constituent of wastewaters and also natural waters treated with hypochlorite, was converted to 3,5,5'trichloro-2,4'-dihydroxybiphenyl and several related compounds in significant amounts. It is possible that these products pose more of a health hazard than either the starting phenols or the unhydroxylated polychlorinated biphenyl derivatives. PMID:3028770

Stereotype threat? Effects of inquiring about test takers' gender on conceptual test performance in physics

NASA Astrophysics Data System (ADS)

Maries, Alexandru; Singh, Chandralekha

2015-12-01

It has been found that activation of a stereotype, for example by indicating one's gender before a test, typically alters performance in a way consistent with the stereotype, an effect called "stereotype threat." On a standardized conceptual physics assessment, we found that asking test takers to indicate their gender right before taking the test did not deteriorate performance compared to an equivalent group who did not provide gender information. Although a statistically significant gender gap was present on the standardized test whether or not students indicated their gender, no gender gap was observed on the multiple-choice final exam students took, which included both quantitative and conceptual questions on similar topics.

Electron shuttles in biotechnology.

PubMed

Watanabe, Kazuya; Manefield, Mike; Lee, Matthew; Kouzuma, Atsushi

2009-12-01

Electron-shuttling compounds (electron shuttles [ESs], or redox mediators) are essential components in intracellular electron transfer, while microbes also utilize self-produced and naturally present ESs for extracellular electron transfer. These compounds assist in microbial energy metabolism by facilitating electron transfer between microbes, from electron-donating substances to microbes, and/or from microbes to electron-accepting substances. Artificially supplemented ESs can create new routes of electron flow in the microbial energy metabolism, thereby opening up new possibilities for the application of microbes to biotechnology processes. Typical examples of such processes include halogenated-organics bioremediation, azo-dye decolorization, and microbial fuel cells. Herein we suggest that ESs can be applied widely to create new microbial biotechnology processes.

Stroke Telemedicine

PubMed Central

Demaerschalk, Bart M.; Miley, Madeline L.; Kiernan, Terri-Ellen J.; Bobrow, Bentley J.; Corday, Doren A.; Wellik, Kay E.; Aguilar, Maria I.; Ingall, Timothy J.; Dodick, David W.; Brazdys, Karina; Koch, Tiffany C.; Ward, Michael P.; Richemont, Phillip C.

2009-01-01

Stroke telemedicine is a consultative modality that facilitates care of patients with acute stroke at underserviced hospitals by specialists at stroke centers. The design and implementation of a hub-and-spoke telestroke network are complex. This review describes the technology that makes stroke telemedicine possible, the members that should be included in a telestroke team, the hub-and-spoke characteristics of a telestroke network, and the format of a typical consultation. Common obstacles to the practice of telestroke medicine are explored, such as medicolegal, economic, and market issues. An example of a state-based telestroke network is thoroughly described, and established international telestroke networks are presented and compared. The opportunities for future advances in telestroke practice, research, and education are considered. PMID:19121244

CRREL (Cold Regions Research and Engineering Laboratory) Technical Publications. Supplement, October 1986-September 1988

DTIC Science & Technology

1988-09-01

1000. Extensive post -test optical analysis allowed Antenna polarization and height, and sigaal stacking estimation of the size distribution and number of...to 10 C higher under natural activated sludge. A design example is presented for conditions than in the wind tunnel studies. Results each case. All...typically limitations of the methcd are presented, examples are columnar type crystal structure. The remaining 2i% shown, and notes on user instructions are

The Next Technology Revolution - Nano Electronic Technology

NASA Astrophysics Data System (ADS)

Turlik, Iwona

2004-03-01

Nanotechnology is a revolutionary engine that will engender enormous changes in a vast majority of today's industries and markets, while potentially creating whole new industries. The impact of nanotechnology is particularly significant in the electronics industry, which is constantly driven by the need for higher performance, increased functionality, smaller size and lower cost. Nanotechnology can influence many of the hundreds of components that are typically assembled to manufacture modern electronic devices. Motorola manufactures electronics for a wide range of industries and communication products. In this presentation, the typical components of a cellular phone are outlined and technology requirements for future products, the customer benefits, and the potential impact of nanotechnology on many of the components are discussed. Technology needs include reliable materials supply, processes for high volume production, experimental and simulation tools, etc. For example, even routine procedures such as failure characterization may require the development of new tools for investigating nano-scale phenomena. Business needs include the development of an effective, high volume supply chain for nano-materials and devices, disruptive product platforms, and visible performance impact on the end consumer. An equally significant long-term industry need is the availability of science and engineering graduates with a multidisciplinary focus and a deep understanding of the fundamentals of nano-technology, that can harness the technology to create revolutionary products.

Upper Extremity Compartment Syndrome in a Patient with Acute Gout Attack but without Trauma or Other Typical Causes.

PubMed

Skedros, John G; Smith, James S; Henrie, Marshall K; Finlinson, Ethan D; Trachtenberg, Joel D

2018-01-01

We report the case of a 30-year-old Polynesian male with a severe gout flare of multiple joints and simultaneous acute compartment syndrome (ACS) of his right forearm and hand without trauma or other typical causes. He had a long history of gout flares, but none were known to be associated with compartment syndrome. He also had concurrent infections in his right elbow joint and olecranon bursa. A few days prior to this episode of ACS, high pain and swelling occurred in his right upper extremity after a minimal workout with light weights. A similar episode occurred seven months prior and was attributed to a gout flare. Unlike past flares that resolved with colchicine and/or anti-inflammatory medications, his current upper extremity pain/swelling worsened and became severe. Hand and forearm fasciotomies were performed. Workup included general medicine, rheumatology and infectious disease consultations, myriad blood tests, and imaging studies including Doppler ultrasound and CT angiography. Additional clinical history suggested that he had previously unrecognized recurrent exertional compartment syndrome that led to the episode of ACS reported here. Chronic exertional compartment syndrome (CECS) presents a difficult diagnosis when presented with multiple symptoms concurrently. This case provides an example of one such diagnosis.

Upper Extremity Compartment Syndrome in a Patient with Acute Gout Attack but without Trauma or Other Typical Causes

PubMed Central

Smith, James S.; Henrie, Marshall K.; Finlinson, Ethan D.; Trachtenberg, Joel D.

2018-01-01

We report the case of a 30-year-old Polynesian male with a severe gout flare of multiple joints and simultaneous acute compartment syndrome (ACS) of his right forearm and hand without trauma or other typical causes. He had a long history of gout flares, but none were known to be associated with compartment syndrome. He also had concurrent infections in his right elbow joint and olecranon bursa. A few days prior to this episode of ACS, high pain and swelling occurred in his right upper extremity after a minimal workout with light weights. A similar episode occurred seven months prior and was attributed to a gout flare. Unlike past flares that resolved with colchicine and/or anti-inflammatory medications, his current upper extremity pain/swelling worsened and became severe. Hand and forearm fasciotomies were performed. Workup included general medicine, rheumatology and infectious disease consultations, myriad blood tests, and imaging studies including Doppler ultrasound and CT angiography. Additional clinical history suggested that he had previously unrecognized recurrent exertional compartment syndrome that led to the episode of ACS reported here. Chronic exertional compartment syndrome (CECS) presents a difficult diagnosis when presented with multiple symptoms concurrently. This case provides an example of one such diagnosis. PMID:29796328

How to assess the impact of a physical parameterization in simulations of moist convection?

NASA Astrophysics Data System (ADS)

Grabowski, Wojciech

2017-04-01

A numerical model capable in simulating moist convection (e.g., cloud-resolving model or large-eddy simulation model) consists of a fluid flow solver combined with required representations (i.e., parameterizations) of physical processes. The later typically include cloud microphysics, radiative transfer, and unresolved turbulent transport. Traditional approaches to investigate impacts of such parameterizations on convective dynamics involve parallel simulations with different parameterization schemes or with different scheme parameters. Such methodologies are not reliable because of the natural variability of a cloud field that is affected by the feedback between the physics and dynamics. For instance, changing the cloud microphysics typically leads to a different realization of the cloud-scale flow, and separating dynamical and microphysical impacts is difficult. This presentation will present a novel modeling methodology, the piggybacking, that allows studying the impact of a physical parameterization on cloud dynamics with confidence. The focus will be on the impact of cloud microphysics parameterization. Specific examples of the piggybacking approach will include simulations concerning the hypothesized deep convection invigoration in polluted environments, the validity of the saturation adjustment in modeling condensation in moist convection, and separation of physical impacts from statistical uncertainty in simulations applying particle-based Lagrangian microphysics, the super-droplet method.

Careers for the 70's In Appliance Repair

ERIC Educational Resources Information Center

Smith, Howard, Ed

1974-01-01

A typical day for an appliance repairman is described to serve as an example and to provide occupational information for a career in appliance repairing. Also, the type of skills needed for this job are described. (DS)

Evaluation and development of a university visitor parking management framework.

DOT National Transportation Integrated Search

2010-05-01

Visitors constitute an important component of a university business. Given that visitors are typically unfamiliar with university : campus layouts, special assistance may be needed to assist them with their parking needs. For example, personal and : ...

Interpolation Hermite Polynomials For Finite Element Method

NASA Astrophysics Data System (ADS)

Gusev, Alexander; Vinitsky, Sergue; Chuluunbaatar, Ochbadrakh; Chuluunbaatar, Galmandakh; Gerdt, Vladimir; Derbov, Vladimir; Góźdź, Andrzej; Krassovitskiy, Pavel

2018-02-01

We describe a new algorithm for analytic calculation of high-order Hermite interpolation polynomials of the simplex and give their classification. A typical example of triangle element, to be built in high accuracy finite element schemes, is given.

UAS flight test for safety and for efficiency

DOT National Transportation Integrated Search

2017-04-01

Manned aircraft that operate in the National Airspace System (NAS) typically undergo certification flight test to ensure they meet a prescribed level of safetydependent on their categorybefore they are able to enter service [for example, Federa...

Support vector machines

NASA Technical Reports Server (NTRS)

Garay, Michael J.; Mazzoni, Dominic; Davies, Roger; Wagstaff, Kiri

2004-01-01

Support Vector Machines (SVMs) are a type of supervised learning algorith,, other examples of which are Artificial Neural Networks (ANNs), Decision Trees, and Naive Bayesian Classifiers. Supervised learning algorithms are used to classify objects labled by a 'supervisor' - typically a human 'expert.'.

Public health implications of components of plastics manufacture. Flame retardants.

PubMed Central

Pearce, E M; Liepins, R

1975-01-01

The four processes involved in the flammability of materials are described and related to the various flame retardance mechanisms that may operate. Following this the four practical approaches used in improving flame retardance of materials are described. Each approach is illustrated with a number of typical examples of flame retardants or synthetic procedures used. This overview of flammability, flame retardance, and flame retardants used is followed by a more detailed examination of most of the plastics manufactured in the United States during 1973, their consumption patterns, and the primary types of flame retardants used in the flame retardance of the most used plastics. The main types of flame retardants are illustrated with a number of typical commercial examples. Statistical data on flame retardant market size, flame retardant growth in plastics, and price ranges of common flame retardants are presented. Images FIGURE 1. FIGURE 2. FIGURE 3. FIGURE 4. PMID:1175568

The Unicellular Green Alga Chlamydomonas reinhardtii as an Experimental System to Study Chloroplast RNA Metabolism

NASA Astrophysics Data System (ADS)

Nickelsen, J.; Kück, U.

Chloroplasts are typical organelles of photoautotrophic eukaryotic cells which drive a variety of functions, including photosynthesis. For many years the unicellular green alga Chlamydomonas reinhardtii has served as an experimental organism for studying photosynthetic processes. The recent development of molecular tools for this organism together with efficient methods of genetic analysis and the availability of many photosynthesis mutants has now made this alga a powerful model system for the analysis of chloroplast biogenesis. For example, techniques have been developed to transfer recombinant DNA into both the nuclear and the chloroplast genome. This allows both complementation tests and analyses of gene functions in vivo. Moreover, site-specific DNA recombinations in the chloroplast allow targeted gene disruption experiments which enable a "reverse genetics" to be performed. The potential of the algal system for the study of chloroplast biogenesis is illustrated in this review by the description of regulatory systems of gene expression involved in organelle biogenesis. One example concerns the regulation of trans-splicing of chloroplast mRNAs, a process which is controlled by both multiple nuclear- and chloroplast-encoded factors. The second example involves the stabilization of chloroplast mRNAs. The available data lead us predict distinct RNA elements, which interact with trans-acting factors to protect the RNA against nucleolytic attacks.

Using client feedback in psychotherapy from an interpersonal process perspective.

PubMed

Reese, Robert J; Slone, Norah C; Miserocchi, Kristin M

2013-09-01

The process of monitoring treatment outcome, also known as "client feedback," is increasingly becoming a recommended practice for psychotherapy. One concern, however, is how to integrate such a process into the work that psychotherapists typically do. Three clinical examples are presented, illustrating how a client feedback system can be used in conjunction with a specific theoretical framework, interpersonal process therapy (Teyber, 2006). The examples highlight that client feedback not only can be of minimal disruption to the psychotherapy process, but may also offer the potential to augment a clinician's approach to helping. Theoretical and research support are provided for each example. 2013 APA, all rights reserved

MOLA Global map of surface gradients on Mars

NASA Technical Reports Server (NTRS)

2000-01-01

Absolute slopes on 30-km baselines indicate the magnitude of typical regional tilts of that scale. The Northern hemisphere is flatter than the South, and shows some linear slope breaks, for example north of Alba Patera (40N, 250E) and the Tharsis province. The major volcanos display flanks slopes of 2.5-5 degrees, comparable to Hawaiian shields. The southwest rim of the Hellas impact basin appears relatively eroded, with shallower typical slopes. A shaded relief map of the topography is overlaid is monochrome.

Microprocessor Control Design for a Low-Head Crossflow Turbine.

DTIC Science & Technology

1985-03-01

Controllers For a Typical 10 KW Hydroturbine ............ 1-5 I-1 Ely’s Crossflow Turbine . ........ 11-2 11-2 Basic Turbine * * 0 * 0 11-5 11-3 Turbine...the systems. For example, a 25 kilowatt hydroturbine built and installed by Bell Hydroelectric would cost approximately $20,000 in 1978 (6:49). The...O Manual Controller S2 E- Microprocessor Controller 1 2 3 4 5 6 7 8 YEARS Fig. 1-2 Comparative Costs of Controllers For a Typical 10 KW Hydroturbine

Considering the worst-case metabolic scenario, but training to the typical-case competitive scenario: response to Amtmann (2012).

PubMed

Del Vecchio, Fabrício Boscolo; Franchini, Emerson

2013-08-01

This response to Amtmann's letter emphasizes that the knowledge of the typical time structure, as well as its variation, together with the main goal of the mixed martial arts athletes--to win by knock out or submission--need to be properly considered during the training sessions. Example with other combat sports are given and discussed, especially concerning the importance of adapting the physical conditioning workouts to the technical-tactical profile of the athlete and not the opposite.

Effects of Molecular Stresses on Energy Transfer Pathways in Opto- and Electro-Excited Conjugated Polymers for High-Efficiency Optoelectronic Devices

DTIC Science & Technology

2014-10-20

unless it hops, and lead to obstructed recombination for PL or charge separation for solar cells and the reduced quantum efficiencies of the...excitons (Fig. 1a and 1b). For the free-moving delocalized states of the Wannier-Mott excitons, the binding energy in silicon , for example, is around...typically encompass many unit cells and typically exist in materials of small bandgap and large dielectric constant. In converse, the the tightly

Effectively identifying compound-protein interactions by learning from positive and unlabeled examples.

PubMed

Cheng, Zhanzhan; Zhou, Shuigeng; Wang, Yang; Liu, Hui; Guan, Jihong; Chen, Yi-Ping Phoebe

2016-05-18

Prediction of compound-protein interactions (CPIs) is to find new compound-protein pairs where a protein is targeted by at least a compound, which is a crucial step in new drug design. Currently, a number of machine learning based methods have been developed to predict new CPIs in the literature. However, as there is not yet any publicly available set of validated negative CPIs, most existing machine learning based approaches use the unknown interactions (not validated CPIs) selected randomly as the negative examples to train classifiers for predicting new CPIs. Obviously, this is not quite reasonable and unavoidably impacts the CPI prediction performance. In this paper, we simply take the unknown CPIs as unlabeled examples, and propose a new method called PUCPI (the abbreviation of PU learning for Compound-Protein Interaction identification) that employs biased-SVM (Support Vector Machine) to predict CPIs using only positive and unlabeled examples. PU learning is a class of learning methods that leans from positive and unlabeled (PU) samples. To the best of our knowledge, this is the first work that identifies CPIs using only positive and unlabeled examples. We first collect known CPIs as positive examples and then randomly select compound-protein pairs not in the positive set as unlabeled examples. For each CPI/compound-protein pair, we extract protein domains as protein features and compound substructures as chemical features, then take the tensor product of the corresponding compound features and protein features as the feature vector of the CPI/compound-protein pair. After that, biased-SVM is employed to train classifiers on different datasets of CPIs and compound-protein pairs. Experiments over various datasets show that our method outperforms six typical classifiers, including random forest, L1- and L2-regularized logistic regression, naive Bayes, SVM and k-nearest neighbor (kNN), and three types of existing CPI prediction models. Source code, datasets and related documents of PUCPI are available at: http://admis.fudan.edu.cn/projects/pucpi.html.

Subsurface Monitoring of CO2 Sequestration - A Review and Look Forward

NASA Astrophysics Data System (ADS)

Daley, T. M.

2012-12-01

The injection of CO2 into subsurface formations is at least 50 years old with large-scale utilization of CO2 for enhanced oil recovery (CO2-EOR) beginning in the 1970s. Early monitoring efforts had limited measurements in available boreholes. With growing interest in CO2 sequestration beginning in the 1990's, along with growth in geophysical reservoir monitoring, small to mid-size sequestration monitoring projects began to appear. The overall goals of a subsurface monitoring plan are to provide measurement of CO2 induced changes in subsurface properties at a range of spatial and temporal scales. The range of spatial scales allows tracking of the location and saturation of the plume with varying detail, while finer temporal sampling (up to continuous) allows better understanding of dynamic processes (e.g. multi-phase flow) and constraining of reservoir models. Early monitoring of small scale pilots associated with CO2-EOR (e.g., the McElroy field and the Lost Hills field), developed many of the methodologies including tomographic imaging and multi-physics measurements. Large (reservoir) scale sequestration monitoring began with the Sleipner and Weyburn projects. Typically, large scale monitoring, such as 4D surface seismic, has limited temporal sampling due to costs. Smaller scale pilots can allow more frequent measurements as either individual time-lapse 'snapshots' or as continuous monitoring. Pilot monitoring examples include the Frio, Nagaoka and Otway pilots using repeated well logging, crosswell imaging, vertical seismic profiles and CASSM (continuous active-source seismic monitoring). For saline reservoir sequestration projects, there is typically integration of characterization and monitoring, since the sites are not pre-characterized resource developments (oil or gas), which reinforces the need for multi-scale measurements. As we move beyond pilot sites, we need to quantify CO2 plume and reservoir properties (e.g. pressure) over large scales, while still obtaining high resolution. Typically the high-resolution (spatial and temporal) tools are deployed in permanent or semi-permanent borehole installations, where special well design may be necessary, such as non-conductive casing for electrical surveys. Effective utilization of monitoring wells requires an approach of modular borehole monitoring (MBM) were multiple measurements can be made. An example is recent work at the Citronelle pilot injection site where an MBM package with seismic, fluid sampling and distributed fiber sensing was deployed. For future large scale sequestration monitoring, an adaptive borehole-monitoring program is proposed.

Hospital catering: for profit or not for profit?

PubMed

Stephenson, S

1991-10-16

When hospitals today hold budget meetings, the typical foodservice operation contributes more than the coffee and doughnuts. Many have found new dollars as well as positive public relations by offering catering programs. Southwest General Hospital, Cleveland, is one example.

Third Earth Resources Technology Satellite Symposium. Volume 2: Summary of results

NASA Technical Reports Server (NTRS)

Freden, S. C. (Editor); Mercanti, E. P. (Editor); Friedman, D. B. (Editor)

1974-01-01

Summaries are provided of significant results taken from presentations at the symposium along with some typical examples of the applications of ERTS-1 data for solving resources management problems at the national, state, and local levels.

Dreams, Daydreams and Discovery.

ERIC Educational Resources Information Center

Brown, R. A.; Luckcock, R. G.

1978-01-01

It has been discovered that dreams and daydreams can be productive states in the process of scientific innovation. An attempt is made to provide some typical examples of insights which have come to scientists during dream-like states and in sleep. (Author/MA)

The observational case for Jupiter being a typical massive planet.

PubMed

Lineweaver, Charles H; Grether, Daniel

2002-01-01

We identify a subsample of the recently detected extrasolar planets that is minimally affected by the selection effects of the Doppler detection method. With a simple analysis we quantify trends in the surface density of this subsample in the period-Msin(i) plane. A modest extrapolation of these trends puts Jupiter in the most densely occupied region of this parameter space, thus indicating that Jupiter is a typical massive planet rather than an outlier. Our analysis suggests that Jupiter is more typical than indicated by previous analyses. For example, instead of MJup mass exoplanets being twice as common as 2 MJup exoplanets, we find they are three times as common.

DDx: diagnostic assistance for the radiologist using PACS

NASA Astrophysics Data System (ADS)

Haynor, David R.

1993-09-01

A potentially valuable tool in medical imaging is the development, and integration with PACS, of systems which enhance the interpretive accuracy of the user -- his ability, given a set of findings (in the broad sense, including clinical information about the patient as well as characteristics of the lesion being analyzed), to assign the proper disease label, or diagnosis, to them. Such systems, which we call here interpretive tools (IT), contain a variety of types of information about diseases and their radiologic diagnosis. They can contain information about large numbers of diseases, including statistical information (incidence, characteristic anatomical locations, association with age and gender or with other diseases, probabilities of various findings given a disease), textual information (description of diseases, treatment, literature references, lists of other entities that might be confused with the disease of interest, additional diagnostic points that may not be represented, or even representable, within IT), and image-based information (typical and atypical examples for each entity and radiographic finding, examples of normal anatomy). These databases can be used both for teaching purposes and as a tool for improving interpretive accuracy [Swett, 1987]. This paper describes some of the requirements for these databases and then discusses early work on the implementation of DDx, an IT whose domain is neuroradiology.

Uptake and localization mechanisms of fluorescent and colored lipid probes. Part 2. QSAR models that predict localization of fluorescent probes used to identify ("specifically stain") various biomembranes and membranous organelles.

PubMed

Horobin, R W; Stockert, J C; Rashid-Doubell, F

2015-05-01

We discuss a variety of biological targets including generic biomembranes and the membranes of the endoplasmic reticulum, endosomes/lysosomes, Golgi body, mitochondria (outer and inner membranes) and the plasma membrane of usual fluidity. For each target, we discuss the access of probes to the target membrane, probe uptake into the membrane and the mechanism of selectivity of the probe uptake. A statement of the QSAR decision rule that describes the required physicochemical features of probes that enable selective staining also is provided, followed by comments on exceptions and limits. Examples of probes typically used to demonstrate each target structure are noted and decision rule tabulations are provided for probes that localize in particular targets; these tabulations show distribution of probes in the conceptual space defined by the relevant structure parameters ("parameter space"). Some general implications and limitations of the QSAR models for probe targeting are discussed including the roles of certain cell and protocol factors that play significant roles in lipid staining. A case example illustrates the predictive ability of QSAR models. Key limiting values of the head group hydrophilicity parameter associated with membrane-probe interactions are discussed in an appendix.

A predator-prey model with a holling type I functional response including a predator mutual interference

USGS Publications Warehouse

Seo, G.; DeAngelis, D.L.

2011-01-01

The most widely used functional response in describing predator-prey relationships is the Holling type II functional response, where per capita predation is a smooth, increasing, and saturating function of prey density. Beddington and DeAngelis modified the Holling type II response to include interference of predators that increases with predator density. Here we introduce a predator-interference term into a Holling type I functional response. We explain the ecological rationale for the response and note that the phase plane configuration of the predator and prey isoclines differs greatly from that of the Beddington-DeAngelis response; for example, in having three possible interior equilibria rather than one. In fact, this new functional response seems to be quite unique. We used analytical and numerical methods to show that the resulting system shows a much richer dynamical behavior than the Beddington-DeAngelis response, or other typically used functional responses. For example, cyclic-fold, saddle-fold, homoclinic saddle connection, and multiple crossing bifurcations can all occur. We then use a smooth approximation to the Holling type I functional response with predator mutual interference to show that these dynamical properties do not result from the lack of smoothness, but rather from subtle differences in the functional responses. ?? 2011 Springer Science+Business Media, LLC.

Deriving field-based species sensitivity distributions (f-SSDs) from stacked species distribution models (S-SDMs).

PubMed

Schipper, Aafke M; Posthuma, Leo; de Zwart, Dick; Huijbregts, Mark A J

2014-12-16

Quantitative relationships between species richness and single environmental factors, also called species sensitivity distributions (SSDs), are helpful to understand and predict biodiversity patterns, identify environmental management options and set environmental quality standards. However, species richness is typically dependent on a variety of environmental factors, implying that it is not straightforward to quantify SSDs from field monitoring data. Here, we present a novel and flexible approach to solve this, based on the method of stacked species distribution modeling. First, a species distribution model (SDM) is established for each species, describing its probability of occurrence in relation to multiple environmental factors. Next, the predictions of the SDMs are stacked along the gradient of each environmental factor with the remaining environmental factors at fixed levels. By varying those fixed levels, our approach can be used to investigate how field-based SSDs for a given environmental factor change in relation to changing confounding influences, including for example optimal, typical, or extreme environmental conditions. This provides an asset in the evaluation of potential management measures to reach good ecological status.

Extending the Riemann-Solver-Free High-Order Space-Time Discontinuous Galerkin Cell Vertex Scheme (DG-CVS) to Solve Compressible Magnetohydrodynamics Equations

DTIC Science & Technology

2016-06-08

forces. Plasmas in hypersonic and astrophysical flows are one of the most typical examples of such conductive fluids. Though MHD models are a low...remain powerful tools in helping researchers to understand the complex physical processes in the geospace environment. For example, the ideal MHD...vertex level within each physical time step. For this reason and the method’s DG ingredient, the method was named as the space-time discontinuous Galerkin

Integrated Baseline Review (IBR) Handbook

NASA Technical Reports Server (NTRS)

Fleming, Jon F.; Terrell, Stefanie M.

2018-01-01

The purpose of this handbook is intended to be a how-to guide to prepare for, conduct, and close-out an Integrated Baseline Review (IBR). It discusses the steps that should be considered, describes roles and responsibilities, tips for tailoring the IBR based on risk, cost, and need for management insight, and provides lessons learned from past IBRs. Appendices contain example documentation typically used in connection with an IBR. Note that these appendices are examples only, and should be tailored to meet the needs of individual projects and contracts.

Crossed asymmetry in Russell-Silver syndrome.

PubMed Central

Qazi, Q H; Kassner, E G; Ganapathy, C

1977-01-01

Since the initial report by Silver et al (1953), more than 50 examples of the Russell-Silver syndrome have been reported. Unilateral congenital asymmetry of the extremities has been considered one of the major features of this disorder (Silver, 1964). We recently observed a child with otherwise typical features of the Russell-Silver syndrome who had enlargement of the right hand and of the left lower extremity. We know of no other recorded example of crossed asymmetry in this clinical entity. Images PMID:839508

Two-Way Communication Using RFID Equipment and Techniques

NASA Technical Reports Server (NTRS)

Jedry, Thomas; Archer, Eric

2007-01-01

Equipment and techniques used in radio-frequency identification (RFID) would be extended, according to a proposal, to enable short-range, two-way communication between electronic products and host computers. In one example of a typical contemplated application, the purpose of the short-range radio communication would be to transfer image data from a user s digital still or video camera to the user s computer for recording and/or processing. The concept is also applicable to consumer electronic products other than digital cameras (for example, cellular telephones, portable computers, or motion sensors in alarm systems), and to a variety of industrial and scientific sensors and other devices that generate data. Until now, RFID has been used to exchange small amounts of mostly static information for identifying and tracking assets. Information pertaining to an asset (typically, an object in inventory to be tracked) is contained in miniature electronic circuitry in an RFID tag attached to the object. Conventional RFID equipment and techniques enable a host computer to read data from and, in some cases, to write data to, RFID tags, but they do not enable such additional functions as sending commands to, or retrieving possibly large quantities of dynamic data from, RFID-tagged devices. The proposal would enable such additional functions. The figure schematically depicts an implementation of the proposal for a sensory device (e.g., a digital camera) that includes circuitry that converts sensory information to digital data. In addition to the basic sensory device, there would be a controller and a memory that would store the sensor data and/or data from the controller. The device would also be equipped with a conventional RFID chipset and antenna, which would communicate with a host computer via an RFID reader. The controller would function partly as a communication interface, implementing two-way communication protocols at all levels (including RFID if needed) between the sensory device and the memory and between the host computer and the memory. The controller would perform power V

Variability in form and growth of sediment waves on turbidite channel levees

USGS Publications Warehouse

Normark, W.R.; Piper, D.J.W.; Posamentier, H.; Pirmez, C.; Migeon, S.

2002-01-01

Fine-grained sediment waves have been observed in many modern turbidite systems, generally restricted to the overbank depositional element. Sediment waves developed on six submarine fan systems are compared using high-resolution seismic-reflection profiles, sediment core samples (including ODP drilling), multibeam bathymetry, 3D seismic-reflection imaging (including examples of burried features), and direct measurements of turbidity currents that overflow their channels. These submarine fan examples extend over more than three orders of magnitude in physical scale. The presence or absence of sediment waves is not simply a matter of either the size of the turbidite channel-levee systems or the dominant initiation process for the turbidity currents that overflow the channels to form the wave fields. Both sediment-core data and seismic-reflection profiles document the upslope migration of the wave forms, with thicker and coarser beds deposited on the up-current flank of the waves. Some wave fields are orthogonal to channel trend and were initiated by large flows whose direction was controlled by upflow morphology, whereas fields subparallel to channel levees resulted from local spillover. In highly meandering systems, sediment waves may mimic meander planform. Larger sediment waves form on channel-levee systems with thicker overflow of turbidity currents, but available data indicate that sediment waves can be maintaned during conditions of relatively thin overflow. Coarser-grained units in sediment waves are typically laminated and thin-bedded sand as much as several centimetres thick, but sand beds as thick as several tens of centimetres have been documented from both modern and buried systems. Current production of hydrocarbons from sediment-wave deposits suggests that it is important to develop criteria for recognising this overbank element in outcrop exposures and borehole data, where the wavelength of typical waves (several kilometres) generally exceeds outcrop scales and wave heights, which are reduced as a result of consolidation during burial, may be too subtle to recognise. Crown Copyright ?? 2002 Published by Elsevier Science B.V. All rights reserved.

3D Printing and Digital Rock Physics for the Geosciences

NASA Astrophysics Data System (ADS)

Martinez, M. J.; Yoon, H.; Dewers, T. A.

2014-12-01

Imaging techniques for the analysis of porous structures have revolutionized our ability to quantitatively characterize geomaterials. For example, digital representations of rock from CT images and physics modeling based on these pore structures provide the opportunity to further advance our quantitative understanding of fluid flow, geomechanics, and geochemistry, and the emergence of coupled behaviors. Additive manufacturing, commonly known as 3D printing, has revolutionized production of custom parts, to the point where parts might be cheaper to print than to make by traditional means in a plant and ship. Some key benefits of additive manufacturing include short lead times, complex shapes, parts on demand, zero required inventory and less material waste. Even subtractive processing, such as milling and etching, may be economized by additive manufacturing. For the geosciences, recent advances in 3D printing technology may be co-opted to print reproducible porous structures derived from CT-imaging of actual rocks for experimental testing. The use of 3D printed microstructure allows us to surmount typical problems associated with sample-to-sample heterogeneity that plague rock physics testing and to test material response independent from pore-structure variability. Together, imaging, digital rocks and 3D printing potentially enables a new workflow for understanding coupled geophysical processes in a real, but well-defined setting circumventing typical issues associated with reproducibility, enabling full characterization and thus connection of physical phenomena to structure. In this talk we will discuss the possibilities that the marriage of these technologies can bring to geosciences, including examples from our current research initiatives in developing constitutive laws for transport and geomechanics via digital rock physics. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

NEUROTOXICITY CHEMICAL MIXTURES: AN EXAMPLE OF OTOTOXICITY PRODUCED BY COMBINED SOLVENTS.

EPA Science Inventory

There are relatively few studies in the experimental literature examining the toxicity of combined exposure to environmental neurotoxicants. In the absence of experimental data, risk assessment evaluations of such exposures typically assume that toxicity is an additive combinati...

Mass Flux Measurements of Arsenic in Groundwater (Battelle Conference)

EPA Science Inventory

Concentration trends of arsenic are typically used to evaluate the performance of remediation efforts designed to mitigate arsenic contamination in groundwater. A complementary approach would be to track changes in mass flux of the contaminant through the subsurface, for exampl...

Eating Disorders among Athletes.

ERIC Educational Resources Information Center

Fairbanks, George

1987-01-01

Case examples are presented of typical pressures felt by aerobic dance instructors, cheerleaders and majorettes, and wrestlers to illustrate how they may become susceptible to eating disorders. Suggestions are presented for coaches, parents, and administrators in preventing or intervening in eating disorders among athletes. (CB)

Tethered Satellites as Enabling Platforms for an Operational Space Weather Monitoring System

NASA Technical Reports Server (NTRS)

Krause, L. Habash; Gilchrist, B. E.; Bilen, S.; Owens, J.; Voronka, N.; Furhop, K.

2013-01-01

Space weather nowcasting and forecasting models require assimilation of near-real time (NRT) space environment data to improve the precision and accuracy of operational products. Typically, these models begin with a climatological model to provide "most probable distributions" of environmental parameters as a function of time and space. The process of NRT data assimilation gently pulls the climate model closer toward the observed state (e.g. via Kalman smoothing) for nowcasting, and forecasting is achieved through a set of iterative physics-based forward-prediction calculations. The issue of required space weather observatories to meet the spatial and temporal requirements of these models is a complex one, and we do not address that with this poster. Instead, we present some examples of how tethered satellites can be used to address the shortfalls in our ability to measure critical environmental parameters necessary to drive these space weather models. Examples include very long baseline electric field measurements, magnetized ionospheric conductivity measurements, and the ability to separate temporal from spatial irregularities in environmental parameters. Tethered satellite functional requirements will be presented for each space weather parameter considered in this study.

Semantic Data Integration and Knowledge Management to Represent Biological Network Associations.

PubMed

Losko, Sascha; Heumann, Klaus

2017-01-01

The vast quantities of information generated by academic and industrial research groups are reflected in a rapidly growing body of scientific literature and exponentially expanding resources of formalized data, including experimental data, originating from a multitude of "-omics" platforms, phenotype information, and clinical data. For bioinformatics, the challenge remains to structure this information so that scientists can identify relevant information, to integrate this information as specific "knowledge bases," and to formalize this knowledge across multiple scientific domains to facilitate hypothesis generation and validation. Here we report on progress made in building a generic knowledge management environment capable of representing and mining both explicit and implicit knowledge and, thus, generating new knowledge. Risk management in drug discovery and clinical research is used as a typical example to illustrate this approach. In this chapter we introduce techniques and concepts (such as ontologies, semantic objects, typed relationships, contexts, graphs, and information layers) that are used to represent complex biomedical networks. The BioXM™ Knowledge Management Environment is used as an example to demonstrate how a domain such as oncology is represented and how this representation is utilized for research.

The focus group technique in library research: an introduction.

PubMed Central

Glitz, B

1997-01-01

The focus group technique is one example of a qualitative research methodology used to explore the opinions, knowledge, perceptions, and concerns of individuals in regard to a particular topic. The focus group typically involves six to ten individuals who have some knowledge of or experience with the topic. The group discussion is led by a moderator who guides participants through a series of open-ended questions. The information gathered can provide important clues to human attitudes and values as they relate to the topic. Such information can be extremely useful to libraries that are trying to gain a better understanding of their patrons' needs and thus make better management decisions to help satisfy those needs. The technique can also be used successfully in conjunction with other research tools, such as surveys, either to help develop a questionnaire or to explain specific survey results. This paper introduces the use of focus groups in library research, the skills needed to conduct groups, and their strengths and weaknesses. Examples of the use of focus groups in health sciences libraries are presented, including the results of a survey from these libraries. PMID:9431428

The focus group technique in library research: an introduction.

PubMed

Glitz, B

1997-10-01

The focus group technique is one example of a qualitative research methodology used to explore the opinions, knowledge, perceptions, and concerns of individuals in regard to a particular topic. The focus group typically involves six to ten individuals who have some knowledge of or experience with the topic. The group discussion is led by a moderator who guides participants through a series of open-ended questions. The information gathered can provide important clues to human attitudes and values as they relate to the topic. Such information can be extremely useful to libraries that are trying to gain a better understanding of their patrons' needs and thus make better management decisions to help satisfy those needs. The technique can also be used successfully in conjunction with other research tools, such as surveys, either to help develop a questionnaire or to explain specific survey results. This paper introduces the use of focus groups in library research, the skills needed to conduct groups, and their strengths and weaknesses. Examples of the use of focus groups in health sciences libraries are presented, including the results of a survey from these libraries.

Gauging hidden symmetries in two dimensions

NASA Astrophysics Data System (ADS)

Samtleben, Henning; Weidner, Martin

2007-08-01

We initiate the systematic construction of gauged matter-coupled supergravity theories in two dimensions. Subgroups of the affine global symmetry group of toroidally compactified supergravity can be gauged by coupling vector fields with minimal couplings and a particular topological term. The gauge groups typically include hidden symmetries that are not among the target-space isometries of the ungauged theory. The gaugings constructed in this paper are described group-theoretically in terms of a constant embedding tensor subject to a number of constraints which parametrizes the different theories and entirely encodes the gauged Lagrangian. The prime example is the bosonic sector of the maximally supersymmetric theory whose ungauged version admits an affine fraktur e9 global symmetry algebra. The various parameters (related to higher-dimensional p-form fluxes, geometric and non-geometric fluxes, etc.) which characterize the possible gaugings, combine into an embedding tensor transforming in the basic representation of fraktur e9. This yields an infinite-dimensional class of maximally supersymmetric theories in two dimensions. We work out and discuss several examples of higher-dimensional origin which can be systematically analyzed using the different gradings of fraktur e9.

A multichannel model for the self-consistent analysis of coherent transport in graphene nanoribbons.

PubMed

Mencarelli, Davide; Pierantoni, Luca; Farina, Marco; Di Donato, Andrea; Rozzi, Tullio

2011-08-23

In this contribution, we analyze the multichannel coherent transport in graphene nanoribbons (GNRs) by a scattering matrix approach. We consider the transport properties of GNR devices of a very general form, involving multiple bands and multiple leads. The 2D quantum transport over the whole GNR surface, described by the Schrödinger equation, is strongly nonlinear as it implies calculation of self-generated and externally applied electrostatic potentials, solutions of the 3D Poisson equation. The surface charge density is computed as a balance of carriers traveling through the channel at all of the allowed energies. Moreover, formation of bound charges corresponding to a discrete modal spectrum is observed and included in the model. We provide simulation examples by considering GNR configurations typical for transistor devices and GNR protrusions that find an interesting application as cold cathodes for X-ray generation. With reference to the latter case, a unified model is required in order to couple charge transport and charge emission. However, to a first approximation, these could be considered as independent problems, as in the example. © 2011 American Chemical Society

Conformal mapping for multiple terminals

PubMed Central

Wang, Weimin; Ma, Wenying; Wang, Qiang; Ren, Hao

2016-01-01

Conformal mapping is an important mathematical tool that can be used to solve various physical and engineering problems in many fields, including electrostatics, fluid mechanics, classical mechanics, and transformation optics. It is an accurate and convenient way to solve problems involving two terminals. However, when faced with problems involving three or more terminals, which are more common in practical applications, existing conformal mapping methods apply assumptions or approximations. A general exact method does not exist for a structure with an arbitrary number of terminals. This study presents a conformal mapping method for multiple terminals. Through an accurate analysis of boundary conditions, additional terminals or boundaries are folded into the inner part of a mapped region. The method is applied to several typical situations, and the calculation process is described for two examples of an electrostatic actuator with three electrodes and of a light beam splitter with three ports. Compared with previously reported results, the solutions for the two examples based on our method are more precise and general. The proposed method is helpful in promoting the application of conformal mapping in analysis of practical problems. PMID:27830746

Mechanistic Insight on the Activity and Substrate Selectivity of Nonheme Iron Dioxygenases.

PubMed

de Visser, Sam P

2018-06-07

Nonheme iron dioxygenases catalyze vital reactions for human health particularly related to aging processes. They are involved in the biosynthesis of amino acids, but also the biodegradation of toxic compounds. Typically they react with their substrate(s) through oxygen atom transfer, although often with the assistance of a co-substrate like α-ketoglutarate that is converted to succinate and CO 2 . Many reaction processes catalyzed by the nonheme iron dioxygenases are stereoselective or regiospecific and hence understanding the mechanism and protein involvement in the selectivity is important for the design of biotechnological applications of these enzymes. To this end, I will review recent work of our group on nonheme iron dioxygenases and include background information on their general structure and catalytic cycle. Examples of stereoselective and regiospecific reaction mechanisms we elucidated are for the AlkB repair enzyme, prolyl-4-hydroxylase and the ergothioneine biosynthesis enzyme. Finally, I cover an example where we bioengineered S-p-hydroxymandelate synthase into the R-p-hydroxymandelate synthase. © 2018 The Chemical Society of Japan & Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Overview of refinement procedures within REFMAC5: utilizing data from different sources.

PubMed

Kovalevskiy, Oleg; Nicholls, Robert A; Long, Fei; Carlon, Azzurra; Murshudov, Garib N

2018-03-01

Refinement is a process that involves bringing into agreement the structural model, available prior knowledge and experimental data. To achieve this, the refinement procedure optimizes a posterior conditional probability distribution of model parameters, including atomic coordinates, atomic displacement parameters (B factors), scale factors, parameters of the solvent model and twin fractions in the case of twinned crystals, given observed data such as observed amplitudes or intensities of structure factors. A library of chemical restraints is typically used to ensure consistency between the model and the prior knowledge of stereochemistry. If the observation-to-parameter ratio is small, for example when diffraction data only extend to low resolution, the Bayesian framework implemented in REFMAC5 uses external restraints to inject additional information extracted from structures of homologous proteins, prior knowledge about secondary-structure formation and even data obtained using different experimental methods, for example NMR. The refinement procedure also generates the `best' weighted electron-density maps, which are useful for further model (re)building. Here, the refinement of macromolecular structures using REFMAC5 and related tools distributed as part of the CCP4 suite is discussed.

Robonaut 2 and You: Specifying and Executing Complex Operations

NASA Technical Reports Server (NTRS)

Baker, William; Kingston, Zachary; Moll, Mark; Badger, Julia; Kavraki, Lydia

2017-01-01

Crew time is a precious resource due to the expense of trained human operators in space. Efficient caretaker robots could lessen the manual labor load required by frequent vehicular and life support maintenance tasks, freeing astronaut time for scientific mission objectives. Humanoid robots can fluidly exist alongside human counterparts due to their form, but they are complex and high-dimensional platforms. This paper describes a system that human operators can use to maneuver Robonaut 2 (R2), a dexterous humanoid robot developed by NASA to research co-robotic applications. The system includes a specification of constraints used to describe operations, and the supporting planning framework that solves constrained problems on R2 at interactive speeds. The paper is developed in reference to an illustrative, typical example of an operation R2 performs to highlight the challenges inherent to the problems R2 must face. Finally, the interface and planner is validated through a case-study using the guiding example on the physical robot in a simulated microgravity environment. This work reveals the complexity of employing humanoid caretaker robots and suggest solutions that are broadly applicable.

Graphene-based smart materials

NASA Astrophysics Data System (ADS)

Yu, Xiaowen; Cheng, Huhu; Zhang, Miao; Zhao, Yang; Qu, Liangti; Shi, Gaoquan

2017-09-01

The high specific surface area and the excellent mechanical, electrical, optical and thermal properties of graphene make it an attractive component for high-performance stimuli-responsive or 'smart' materials. Complementary to these inherent properties, functionalization or hybridization can substantially improve the performance of these materials. Typical graphene-based smart materials include mechanically exfoliated perfect graphene, chemical vapour deposited high-quality graphene, chemically modified graphene (for example, graphene oxide and reduced graphene oxide) and their macroscopic assemblies or composites. These materials are sensitive to a range of stimuli, including gas molecules or biomolecules, pH value, mechanical strain, electrical field, and thermal or optical excitation. In this Review, we outline different graphene-based smart materials and their potential applications in actuators, chemical or strain sensors, self-healing materials, photothermal therapy and controlled drug delivery. We also introduce the working mechanisms of graphene-based smart materials and discuss the challenges facing the realization of their practical applications.

End-to-end imaging information rate advantages of various alternative communication systems

NASA Technical Reports Server (NTRS)

Rice, R. F.

1982-01-01

The efficiency of various deep space communication systems which are required to transmit both imaging and a typically error sensitive class of data called general science and engineering (gse) are compared. The approach jointly treats the imaging and gse transmission problems, allowing comparisons of systems which include various channel coding and data compression alternatives. Actual system comparisons include an advanced imaging communication system (AICS) which exhibits the rather significant advantages of sophisticated data compression coupled with powerful yet practical channel coding. For example, under certain conditions the improved AICS efficiency could provide as much as two orders of magnitude increase in imaging information rate compared to a single channel uncoded, uncompressed system while maintaining the same gse data rate in both systems. Additional details describing AICS compression and coding concepts as well as efforts to apply them are provided in support of the system analysis.

Discretely Conservative Finite-Difference Formulations for Nonlinear Conservation Laws in Split Form: Theory and Boundary Conditions

NASA Technical Reports Server (NTRS)

Fisher, Travis C.; Carpenter, Mark H.; Nordstroem, Jan; Yamaleev, Nail K.; Swanson, R. Charles

2011-01-01

Simulations of nonlinear conservation laws that admit discontinuous solutions are typically restricted to discretizations of equations that are explicitly written in divergence form. This restriction is, however, unnecessary. Herein, linear combinations of divergence and product rule forms that have been discretized using diagonal-norm skew-symmetric summation-by-parts (SBP) operators, are shown to satisfy the sufficient conditions of the Lax-Wendroff theorem and thus are appropriate for simulations of discontinuous physical phenomena. Furthermore, special treatments are not required at the points that are near physical boundaries (i.e., discrete conservation is achieved throughout the entire computational domain, including the boundaries). Examples are presented of a fourth-order, SBP finite-difference operator with second-order boundary closures. Sixth- and eighth-order constructions are derived, and included in E. Narrow-stencil difference operators for linear viscous terms are also derived; these guarantee the conservative form of the combined operator.

Accelerated gas-liquid visible light photoredox catalysis with continuous-flow photochemical microreactors.

PubMed

Straathof, Natan J W; Su, Yuanhai; Hessel, Volker; Noël, Timothy

2016-01-01

In this protocol, we describe the construction and use of an operationally simple photochemical microreactor for gas-liquid photoredox catalysis using visible light. The general procedure includes details on how to set up the microreactor appropriately with inlets for gaseous reagents and organic starting materials, and it includes examples of how to use it to achieve continuous-flow preparation of disulfides or trifluoromethylated heterocycles and thiols. The reported photomicroreactors are modular, inexpensive and can be prepared rapidly from commercially available parts within 1 h even by nonspecialists. Interestingly, typical reaction times of gas-liquid visible light photocatalytic reactions performed in microflow are lower (in the minute range) than comparable reactions performed as a batch process (in the hour range). This can be attributed to the improved irradiation efficiency of the reaction mixture and the enhanced gas-liquid mass transfer in the segmented gas-liquid flow regime.

Synthesis of alkyl- and aryl-amino-substituted anthraquinone derivatives by microwave-assisted copper(0)-catalyzed Ullmann coupling reactions.

PubMed

Baqi, Younis; Müller, Christa E

2010-05-01

This protocol describes the efficient, generally applicable Ullmann coupling reaction of bromaminic acid with alkyl- or aryl-amines in phosphate buffer under microwave irradiation using elemental copper as a catalyst. The reaction leads to a number of biologically active compounds. As a prototypical example, the synthesis of a new, potent antagonist of human platelet P2Y(12) receptors, which has potential as an antithrombotic drug, is described in detail. The optimized protocol includes a description of an appropriate reaction setup, thin layer chromatography for monitoring the reaction and a procedure for the isolation, purification and characterization of the anticipated product. The reaction is performed without the use of a glove box and there is no requirement for an inert atmosphere. The reaction typically proceeds within 2-30 min, the protocol, including workup, generally takes 1-3 h to complete.

NONBACTERIAL MYOSITIS

PubMed Central

Crum-Cianflone, Nancy F.

2010-01-01

Infectious myositis is defined as an infection of a skeletal muscle. Infectious myositis is most commonly caused by bacteria; however, a variety of viral, parasitic, and fungal agents may also cause myositis. The pathogenesis of nonbacterial infectious myositis is via direct infection of the musculature or immune mechanisms. Symptoms typically include muscular pain, tenderness, swelling, and/or weakness. The diagnosis of the specific microbe is often suggested by the presence of concordant clinical signs and symptoms, a detailed medical/travel history, and laboratory data. For example, immunocompromised hosts have a heightened risk of fungal myositis, whereas the presence of a travel history to an endemic location and/or eosinophilia may suggest a parasitic cause. Definitive diagnosis requires detecting the organism by specific laboratory testing including serologies, histopathology, and/or cultures. Treatment entails antimicrobial agents against the pathogen, with consideration for surgical drainage for focal purulent collections within the musculature. PMID:21308520

Compassion fatigue and burnout: what managers should know.

PubMed

Slatten, Lise Anne; David Carson, Kerry; Carson, Paula Phillips

2011-01-01

Most health care employees experience and are bolstered by compassion satisfaction as they deal with patients in need. However, the more empathetic a health care provider is, the more likely he or she will experience compassion fatigue. Compassion fatigue is a negative syndrome that occurs when dealing with the traumatic experiences of patients, and examples of symptoms include intrusive thoughts, sleeping problems, and depression. Compassion fatigue is different from burnout. Compassion fatigue is a rapidly occurring disorder for primary health care workers who work with suffering patients, whereas burnout, a larger construct, is a slowly progressing disorder for employees who typically are working in burdensome organizational environments. Managers can mitigate problems associated with compassion fatigue with a number of interventions including patient reassignments, formal mentoring programs, employee training, and a compassionate organizational culture. With burnout, health care managers will want to focus primarily on chronic organizational problems.

Advances in bioresponsive closed-loop drug delivery systems.

PubMed

Yu, Jicheng; Zhang, Yuqi; Yan, Junjie; Kahkoska, Anna R; Gu, Zhen

2017-11-27

Controlled drug delivery systems are able to improve efficacy and safety of therapeutics by optimizing the duration and kinetics of release. Among them, closed-loop delivery strategies, also known as self-regulated administration, have proven to be a practical tool for homeostatic regulation, by tuning drug release as a function of biosignals relevant to physiological and pathological processes. A typical example is glucose-responsive insulin delivery system, which can mimic the pancreatic beta cells to release insulin with a proper dose at a proper time point by responding to plasma glucose levels. Similar self-regulated systems are also important in the treatment of other diseases including thrombosis and bacterial infection. In this review, we survey the recent advances in bioresponsive closed-loop drug delivery systems, including glucose-responsive, enzyme-activated, and other biosignal-mediated delivery systems. We also discuss the future opportunities and challenges in this field. Copyright © 2017 Elsevier B.V. All rights reserved.

Pressure and Thrust Measurements of a High-Frequency Pulsed Detonation Tube

NASA Technical Reports Server (NTRS)

Nguyen, N.; Cutler, A. D.

2008-01-01

This paper describes measurements of a small-scale, high-frequency pulsed detonation tube. The device utilized a mixture of H2 fuel and air, which was injected into the device at frequencies of up to 1200 Hz. Pulsed detonations were demonstrated in an 8-inch long combustion volume, at about 600 Hz, for the quarter wave mode of resonance. The primary objective of this experiment was to measure the generated thrust. A mean value of thrust was measured up to 6.0 lb, corresponding to H2 flow based specific impulse of 2970 s. This value is comparable to measurements in H2-fueled pulsed detonation engines (PDEs). The injection and detonation frequency for this new experimental case was much higher than typical PDEs, where frequencies are usually less than 100 Hz. The compact size of the device and high frequency of detonation yields a thrust-per-unit-volume of approximately 2.0 pounds per cubic inch, and compares favorably with other experiments, which typically have thrust-per-unit-volume of order 0.01 pound per cubic inch. This much higher volumetric efficiency results in a potentially much more practical device than the typical PDE, for a wide range of potential applications, including high-speed boundary layer separation control, for example in hypersonic engine inlets, and propulsion for small aircraft and missiles.

Systems Engineering and Reusable Avionics

NASA Technical Reports Server (NTRS)

Conrad, James M.; Murphy, Gloria

2010-01-01

One concept for future space flights is to construct building blocks for a wide variety of avionics systems. Once a unit has served its original purpose, it can be removed from the original vehicle and reused in a similar or dissimilar function, depending on the function blocks the unit contains. For example: Once a lunar lander has reached the moon's surface, an engine controller for the Lunar Decent Module would be removed and used for a lunar rover motor control unit or for a Environmental Control Unit for a Lunar Habitat. This senior design project included the investigation of a wide range of functions of space vehicles and possible uses. Specifically, this includes: (1) Determining and specifying the basic functioning blocks of space vehicles. (2) Building and demonstrating a concept model. (3) Showing high reliability is maintained. The specific implementation of this senior design project included a large project team made up of Systems, Electrical, Computer, and Mechanical Engineers/Technologists. The efforts were made up of several sub-groups that each worked on a part of the entire project. The large size and complexity made this project one of the more difficult to manage and advise. Typical projects only have 3-4 students, but this project had 10 students from five different disciplines. This paper describes the difference of this large project compared to typical projects, and the challenges encountered. It also describes how the systems engineering approach was successfully implemented so that the students were able to meet nearly all of the project requirements.

Protanomaly-without-darkened-red is deuteranopia with rods

PubMed Central

Shevell, Steven K.; Sun, Yang; Neitz, Maureen

2008-01-01

The Rayleigh match, a color match between a mixture of 545+670 nm lights and 589 nm light in modern instruments, is the definitive measurement for the diagnosis of inherited red/green color defects. All trichromats, whether normal or anomalous, have a limited range of 545+670 nm mixtures they perceive to match 589 nm: a typical color-normal match-range is about 50–55% of 670 nm in the mixture (deutan mode), while deuteranomals have a range that includes mixtures with less 670 nm than normal and protanomals a range that includes mixtures with more 670 nm than normal. Further, the matching luminance of the 589 nm light for deuteranomals is the same as for normals but for protanomals is below normal. An example of an unexpected Rayleigh match, therefore, is a match range above normal (typical of protanomaly) and a normal luminance setting for 589 nm (typical of deuteranomaly), a match that Pickford (1950) called protanomaly “when the red end of the spectrum is not darkened”. In this case, Rayleigh matching does not yield a clear diagnosis. Aside from Pickford, we are aware of only one other report of a similar observer (Pokorny and Smith, 1981); this study predated modern genetic techniques that can reveal the cone photopigment(s) in the red/green range. We recently had the opportunity to conduct genetic and psychophysical tests on such an observer. Genetic results predict he is a deuteranope. His Rayleigh match is consistent with L cones and a contribution from rods. Further, with a rod-suppressing background, his Rayleigh match is characteristic of a single L-cone photopigment (deuteranopia). PMID:18423511

Protanomaly without darkened red is deuteranopia with rods.

PubMed

Shevell, Steven K; Sun, Yang; Neitz, Maureen

2008-11-01

The Rayleigh match, a color match between a mixture of 545+670 nm lights and 589 nm light in modern instruments, is the definitive measurement for the diagnosis of inherited red-green color defects. All trichromats, whether normal or anomalous, have a limited range of 545+670 nm mixtures they perceive to match 589 nm: a typical color-normal match range is about 50-55% of 670 nm in the mixture (deutan mode), while deuteranomals have a range that includes mixtures with less 670 nm than normal and protanomals a range that includes mixtures with more 670 nm than normal. Further, the matching luminance of the 589 nm light for deuteranomals is the same as for normals but for protanomals is below normal. An example of an unexpected Rayleigh match, therefore, is a match range above normal (typical of protanomaly) and a normal luminance setting for 589 nm (typical of deuteranomaly), a match called protanomaly "when the red end of the spectrum is not darkened" [Pickford, R.W. (1950). Three pedigrees for color blindness. Nature, 165, 182.]. In this case, Rayleigh matching does not yield a clear diagnosis. Aside from Pickford, we are aware of only one other report of a similar observer [Pokorny, J., & Smith, V. C. (1981). A variant of red-green color defect. Vision Research, 21, 311-317]; this study predated modern genetic techniques that can reveal the cone photopigment(s) in the red-green range. We recently had the opportunity to conduct genetic and psychophysical tests on such an observer. Genetic results predict he is a deuteranope. His Rayleigh match is consistent with L cones and a contribution from rods. Further, with a rod-suppressing background, his Rayleigh match is characteristic of a single L-cone photopigment (deuteranopia).

NASTRAN pre and postprocessors using low-cost interactive graphics

NASA Technical Reports Server (NTRS)

Herness, E. D.; Kriloff, H. Z.

1975-01-01

A design for a NASTRAN preprocessor is given to illustrate a typical preprocessor. Several displays of NASTRAN models illustrate the preprocessor's capabilities. A design of a NASTRAN postprocessor is presented along with an example of displays generated by that NASTRAN processor.

An Interdisciplinary Practical for Multimedia Engineering Students

ERIC Educational Resources Information Center

Marcos-Jorquera, Diego; Pertegal-Felices, María Luisa; Jimeno-Morenilla, Antonio; Gilar-Corbí, Raquel

2017-01-01

Interdisciplinary projects in the industry typically require collaboration between professionals from various fields. However, this relationship is not generally addressed in the training offered by university programs, which often ignore this interdisciplinary approach. This paper offers an example of interdisciplinary interaction through joint…

Theoretical and Empirical Comparisons between Two Models for Continuous Item Responses.

ERIC Educational Resources Information Center

Ferrando, Pere J.

2002-01-01

Analyzed the relations between two continuous response models intended for typical response items: the linear congeneric model and Samejima's continuous response model (CRM). Illustrated the relations described using an empirical example and assessed the relations through a simulation study. (SLD)

Stress Training and the New Military Environment

DTIC Science & Technology

2006-04-01

stressors in military missions may be for example, fatigue and boredom . A typical acute stressor is threat. The outcomes of stress can be either... prosocial behaviour, increased personal aggression, neglect of social or interpersonal cues, and less cooperative behaviour among team members [6

Implications of conceptual channel representation on SWAT streamflow and sediment modeling

USDA-ARS?s Scientific Manuscript database

Hydrologic modeling outputs are influenced by how a watershed system is represented. Channel routing is a typical example of the mathematical conceptualization of watershed landscape and processes in hydrologic modeling. We investigated the sensitivity of accuracy, equifinality, and uncertainty of...

76 FR 48769 - Metadata Standards To Support Nationwide Electronic Health Information Exchange

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-09

... log of the set of TDEs used for a particular task. For example, a TDE containing diagnostic study... typically be an OID Patient ID--Address 1234 Main St. Apt 3 Bedford MA/state> 01730 Patient ID--Name Note...

On the Effect of Preferential Sampling in Spatial Prediction

EPA Science Inventory

The choice of the sampling locations in a spatial network is often guided by practical demands. In particular, typically, locations are preferentially chosen to capture high values of a response, for example, air pollution levels in environmental monitoring. Then, model estimatio...

29 CFR 541.203 - Administrative exemption examples.

Code of Federal Regulations, 2010 CFR

2010-07-01

... management consultants who study the operations of a business and propose changes in organization generally... their work typically does not involve work directly related to the management or general business... disadvantages of different financial products; and marketing, servicing or promoting the employer's financial...

Development of a category 2 approach system model

NASA Technical Reports Server (NTRS)

Johnson, W. A.; Mcruer, D. T.

1972-01-01

An analytical model is presented which provides, as its primary output, the probability of a successful Category II approach. Typical applications are included using several example systems (manual and automatic) which are subjected to random gusts and deterministic wind shear. The primary purpose of the approach system model is to establish a structure containing the system elements, command inputs, disturbances, and their interactions in an analytical framework so that the relative effects of changes in the various system elements on precision of control and available margins of safety can be estimated. The model is intended to provide insight for the design and integration of suitable autopilot, display, and navigation elements; and to assess the interaction of such elements with the pilot/copilot.

A variational technique for smoothing flight-test and accident data

NASA Technical Reports Server (NTRS)

Bach, R. E., Jr.

1980-01-01

The problem of determining aircraft motions along a trajectory is solved using a variational algorithm that generates unmeasured states and forcing functions, and estimates instrument bias and scale-factor errors. The problem is formulated as a nonlinear fixed-interval smoothing problem, and is solved as a sequence of linear two-point boundary value problems, using a sweep method. The algorithm has been implemented for use in flight-test and accident analysis. Aircraft motions are assumed to be governed by a six-degree-of-freedom kinematic model; forcing functions consist of body accelerations and winds, and the measurement model includes aerodynamic and radar data. Examples of the determination of aircraft motions from typical flight-test and accident data are presented.

A fourth order accurate finite difference scheme for the computation of elastic waves

NASA Technical Reports Server (NTRS)

Bayliss, A.; Jordan, K. E.; Lemesurier, B. J.; Turkel, E.

1986-01-01

A finite difference for elastic waves is introduced. The model is based on the first order system of equations for the velocities and stresses. The differencing is fourth order accurate on the spatial derivatives and second order accurate in time. The model is tested on a series of examples including the Lamb problem, scattering from plane interf aces and scattering from a fluid-elastic interface. The scheme is shown to be effective for these problems. The accuracy and stability is insensitive to the Poisson ratio. For the class of problems considered here it is found that the fourth order scheme requires for two-thirds to one-half the resolution of a typical second order scheme to give comparable accuracy.

User's Guide for ECAP2D: an Euler Unsteady Aerodynamic and Aeroelastic Analysis Program for Two Dimensional Oscillating Cascades, Version 1.0

NASA Technical Reports Server (NTRS)

Reddy, T. S. R.

1995-01-01

This guide describes the input data required for using ECAP2D (Euler Cascade Aeroelastic Program-Two Dimensional). ECAP2D can be used for steady or unsteady aerodynamic and aeroelastic analysis of two dimensional cascades. Euler equations are used to obtain aerodynamic forces. The structural dynamic equations are written for a rigid typical section undergoing pitching (torsion) and plunging (bending) motion. The solution methods include harmonic oscillation method, influence coefficient method, pulse response method, and time integration method. For harmonic oscillation method, example inputs and outputs are provided for pitching motion and plunging motion. For the rest of the methods, input and output for pitching motion only are given.

Hypnosis for Hot Flashes and Associated Symptomsin Women with Breast Cancer.

PubMed

Roberts, R Lynae; Na, Hyeji; Yek, Ming Hwei; Elkins, Gary

2017-10-01

Women with breast cancer experience a host of physical and psychological symptoms, including hot flashes, sleep difficulties, anxiety, and depression. Therefore, treatment for women with breast cancer should target these symptoms and be individualized to patients' specific presentations. The current article reviews the common symptoms associated with breast cancer in women, then examines clinical hypnosis as a treatment for addressing these symptoms and improving the quality of life of women with breast cancer. Clinical hypnosis is an effective, nonpharmaceutical treatment for hot flashes and addressing many symptoms typically experienced by breast cancer patients. A case example is provided to illustrate the use of clinical hypnosis for the treatment of hot flashes with a patient with breast cancer.

Peptidylprolyl cis-trans isomerases of Legionella pneumophila: virulence, moonlighting and novel therapeutic targets.

PubMed

Rasch, Janine; Ünal, Can M; Steinert, Michael

2014-12-01

Legionella pneumophila, typically a parasite of free-living protozoa, can also replicate in human alveolar macrophages and lung epithelial cells causing Legionnaires' disease in humans, a severe atypical pneumonia. The pathogen encodes six peptidylprolyl cis-trans isomerases (PPIases), which generally accelerate folding of prolyl peptide bonds, and influence protein folding. PPIases can be divided into three classes, cyclophilins, parvulins and FK506-binding proteins (FKBPs). They contribute to a multitude of cellular functions including bacterial virulence. In the present review, we provide an overview of L. pneumophila PPIases, discussing their known and anticipated functions as well as moonlighting phenomena. By taking the example of the macrophage infectivity potentiator (Mip) of L. pneumophila, we highlight the potential of PPIases as promising drug targets.

Environmental geology of Bath, England

NASA Astrophysics Data System (ADS)

Kellaway, G. A.

1995-10-01

The hot springs of Bath, England, have been of importance to man for hundreds of years. It was a famous spa in Roman times. Subsequently, the springs were used during the 17th through the 20th centuries and extensive urban and commercial properties were developed at Bath using the water for medical and tourist-oriented activities. With urban and commercial development in the area, man's impact on the environment was substantial and typical environmental problems included pollution, land subsidence, or stability that effected construction, drainage, highways, and canals. During the growth of Bath in the 18th and 19th centuries these environmental problems were described by geologist William Smith and Joseph Townsend. Bath and vicinity provides a unique example of environmental geoscience.

The art and science of rotary wing data correlation

NASA Technical Reports Server (NTRS)

Drees, J. M.

1976-01-01

This paper presents an overview of the correlation of helicopter rotor performance and loads data from various tests and analyses. Information is included from U.S. Army-sponsored tests conducted by Bell Helicopter Company for free-flight full-scale tests in the NASA-Ames 40 x 80 wind tunnel, one-fifth scale tests in the NASA-Langley Transonic Dynamics Tunnel, and small-scale tests of a rotor in air. These test data are compared with each other, where appropriate, and with calculated results. Typical examples illustrate the state of the art for correlation and indicate anomalies encountered. It is concluded that a procedure using theoretical analyses to aid in interpretation and evaluation of test results is essential to developing a science of correlation.

Techniques for using diazo materials in remote sensor data analysis

NASA Technical Reports Server (NTRS)

Whitebay, L. E.; Mount, S.

1978-01-01

The use of data derived from LANDSAT is facilitated when special products or computer enhanced images can be analyzed. However, the facilities required to produce and analyze such products prevent many users from taking full advantages of the LANDSAT data. A simple, low-cost method is presented by which users can make their own specially enhanced composite images from the four band black and white LANDSAT images by using the diazo process. The diazo process is described and a detailed procedure for making various color composites, such as color infrared, false natural color, and false color, is provided. The advantages and limitations of the diazo process are discussed. A brief discussion interpretation of diazo composites for land use mapping with some typical examples is included.

Numerical Studies of Impurities in Fusion Plasmas

DOE R&D Accomplishments Database

Hulse, R. A.

1982-09-01

The coupled partial differential equations used to describe the behavior of impurity ions in magnetically confined controlled fusion plasmas require numerical solution for cases of practical interest. Computer codes developed for impurity modeling at the Princeton Plasma Physics Laboratory are used as examples of the types of codes employed for this purpose. These codes solve for the impurity ionization state densities and associated radiation rates using atomic physics appropriate for these low-density, high-temperature plasmas. The simpler codes solve local equations in zero spatial dimensions while more complex cases require codes which explicitly include transport of the impurity ions simultaneously with the atomic processes of ionization and recombination. Typical applications are discussed and computational results are presented for selected cases of interest.

Mariner 9 mapping science sequence design.

NASA Technical Reports Server (NTRS)

Goldman, A. M., Jr.

1973-01-01

The primary mission of Mariner 9 was to map the Martian surface. This paper discusses in detail the design of the mapping science sequences which were executed by the spacecraft in sixty days and during which over eighty percent of the surface was photographed. The sequence design was influenced by many factors: experimenter scientific objectives, instrument capabilities, spacecraft capabilities, orbit characteristics, and data return rates, which are illustrated graphically. Typical orbits are depicted for each of the three different mapping phases lasting twenty days. Examples of typical orbital sequence plans prepared daily during mission operations are given.

Typical performance of approximation algorithms for NP-hard problems

NASA Astrophysics Data System (ADS)

Takabe, Satoshi; Hukushima, Koji

2016-11-01

Typical performance of approximation algorithms is studied for randomized minimum vertex cover problems. A wide class of random graph ensembles characterized by an arbitrary degree distribution is discussed with the presentation of a theoretical framework. Herein, three approximation algorithms are examined: linear-programming relaxation, loopy-belief propagation, and the leaf-removal algorithm. The former two algorithms are analyzed using a statistical-mechanical technique, whereas the average-case analysis of the last one is conducted using the generating function method. These algorithms have a threshold in the typical performance with increasing average degree of the random graph, below which they find true optimal solutions with high probability. Our study reveals that there exist only three cases, determined by the order of the typical performance thresholds. In addition, we provide some conditions for classification of the graph ensembles and demonstrate explicitly some examples for the difference in thresholds.

Durability Issues for the Protection of Materials from Atomic Oxygen Attack in Low Earth Orbit

NASA Astrophysics Data System (ADS)

Banks, B. A.; Lenczewski, M.; Demko, R.

2002-01-01

Low Earth orbital atomic oxygen is capable of eroding most polymeric materials typically used on spacecraft. Solar array blankets, thermal control polymers, and carbon fiber matrix composites are readily oxidized to become thinner and less capable of supporting the loads imposed upon them. Protective coatings have been developed that are or become durable to atomic oxygen to prevent oxidative erosion of the underlying polymers. However, the details of the chemistry, surface roughness and coating configuration can play a significant role as to whether or not the coating provides long duration atomic oxygen protection. Identical coatings on different surface roughness surfaces can produce drastically have drastically different durability results. Poor choice of protective coatings or self-protecting materials can also result in contamination of surrounding spacecraft surfaces. Such contamination can deposit on optical or thermal control surfaces resulting in changes in solar absorbtance, transmittance and reflectance of surfaces. Examples of successful and unsuccessful techniques used for atomic oxygen durability or protection will be presented based on actual results from low Earth orbital spacecraft. Investigations of the causes of undesired consequences or protective coating failures will be presented including ground laboratory experimental analysis as well as computational modeling. Atomic oxygen protective coating results from various low Earth orbital missions including the Long Duration Exposure Facility, the European Retrievable Carrier, Mir, and International Space Station will be presented to illustrate examples of protection successes as well as failures including analyses of the causes for the differences and proposed solutions.

Differences in manifestations of Marfan syndrome, Ehlers-Danlos syndrome, and Loeys-Dietz syndrome.

PubMed

Meester, Josephina A N; Verstraeten, Aline; Schepers, Dorien; Alaerts, Maaike; Van Laer, Lut; Loeys, Bart L

2017-11-01

Many different heritable connective tissue disorders (HCTD) have been described over the past decades. These syndromes often affect the connective tissue of various organ systems, including heart, blood vessels, skin, joints, bone, eyes, and lungs. The discovery of these HCTD was followed by the identification of mutations in a wide range of genes encoding structural proteins, modifying enzymes, or components of the TGFβ-signaling pathway. Three typical examples of HCTD are Marfan syndrome (MFS), Ehlers-Danlos syndrome (EDS), and Loeys-Dietz syndrome (LDS). These syndromes show some degree of phenotypical overlap of cardiovascular, skeletal, and cutaneous features. MFS is typically characterized by cardiovascular, ocular, and skeletal manifestations and is caused by heterozygous mutations in FBN1 , coding for the extracellular matrix (ECM) protein fibrillin-1. The most common cardiovascular phenotype involves aortic aneurysm and dissection at the sinuses of Valsalva. LDS is caused by mutations in TGBR1/2 , SMAD2/3 , or TGFB2/3 , all coding for components of the TGFβ-signaling pathway. LDS can be distinguished from MFS by the unique presence of hypertelorism, bifid uvula or cleft palate, and widespread aortic and arterial aneurysm and tortuosity. Compared to MFS, LDS cardiovascular manifestations tend to be more severe. In contrast, no association is reported between LDS and the presence of ectopia lentis, a key distinguishing feature of MFS. Overlapping features between MFS and LDS include scoliosis, pes planus, anterior chest deformity, spontaneous pneumothorax, and dural ectasia. EDS refers to a group of clinically and genetically heterogeneous connective tissue disorders and all subtypes are characterized by variable abnormalities of skin, ligaments and joints, blood vessels, and internal organs. Typical presenting features include joint hypermobility, skin hyperextensibility, and tissue fragility. Up to one quarter of the EDS patients show aortic aneurysmal disease. The latest EDS nosology distinguishes 13 subtypes. Many phenotypic features show overlap between the different subtypes, which makes the clinical diagnosis rather difficult and highlights the importance of molecular diagnostic confirmation.

Differences in manifestations of Marfan syndrome, Ehlers-Danlos syndrome, and Loeys-Dietz syndrome

PubMed Central

Meester, Josephina A. N.; Verstraeten, Aline; Schepers, Dorien; Alaerts, Maaike; Van Laer, Lut

2017-01-01

Many different heritable connective tissue disorders (HCTD) have been described over the past decades. These syndromes often affect the connective tissue of various organ systems, including heart, blood vessels, skin, joints, bone, eyes, and lungs. The discovery of these HCTD was followed by the identification of mutations in a wide range of genes encoding structural proteins, modifying enzymes, or components of the TGFβ-signaling pathway. Three typical examples of HCTD are Marfan syndrome (MFS), Ehlers-Danlos syndrome (EDS), and Loeys-Dietz syndrome (LDS). These syndromes show some degree of phenotypical overlap of cardiovascular, skeletal, and cutaneous features. MFS is typically characterized by cardiovascular, ocular, and skeletal manifestations and is caused by heterozygous mutations in FBN1, coding for the extracellular matrix (ECM) protein fibrillin-1. The most common cardiovascular phenotype involves aortic aneurysm and dissection at the sinuses of Valsalva. LDS is caused by mutations in TGBR1/2, SMAD2/3, or TGFB2/3, all coding for components of the TGFβ-signaling pathway. LDS can be distinguished from MFS by the unique presence of hypertelorism, bifid uvula or cleft palate, and widespread aortic and arterial aneurysm and tortuosity. Compared to MFS, LDS cardiovascular manifestations tend to be more severe. In contrast, no association is reported between LDS and the presence of ectopia lentis, a key distinguishing feature of MFS. Overlapping features between MFS and LDS include scoliosis, pes planus, anterior chest deformity, spontaneous pneumothorax, and dural ectasia. EDS refers to a group of clinically and genetically heterogeneous connective tissue disorders and all subtypes are characterized by variable abnormalities of skin, ligaments and joints, blood vessels, and internal organs. Typical presenting features include joint hypermobility, skin hyperextensibility, and tissue fragility. Up to one quarter of the EDS patients show aortic aneurysmal disease. The latest EDS nosology distinguishes 13 subtypes. Many phenotypic features show overlap between the different subtypes, which makes the clinical diagnosis rather difficult and highlights the importance of molecular diagnostic confirmation. PMID:29270370

Rooting Out Aberrant Behavior in Training.

ERIC Educational Resources Information Center

Kokalis, Jerry, Jr.; Paquin, Dave

1989-01-01

Discusses aberrant, or disruptive, behavior in an industrial/business, classroom-based, instructor-led training setting. Three examples of aberrant behavior are described, typical case studies are provided for each, and preventive (long-term) and corrective (on-the-spot) strategies for dealing with the problems are discussed. (LRW)

Pitfalls in Teaching Judgment Heuristics

ERIC Educational Resources Information Center

Shepperd, James A.; Koch, Erika J.

2005-01-01

Demonstrations of judgment heuristics typically focus on how heuristics can lead to poor judgments. However, exclusive focus on the negative consequences of heuristics can prove problematic. We illustrate the problem with the representativeness heuristic and present a study (N = 45) that examined how examples influence understanding of the…

A Successful Senior Seminar: Unsolved Problems in Number Theory

ERIC Educational Resources Information Center

Styer, Robert

2014-01-01

The "Unsolved Problems in Number Theory" book by Richard Guy provides nice problems suitable for a typical math major. We give examples of problems that have worked well in our senior seminar course and some nice results that senior math majors can obtain.

15 CFR 295.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... activity. (g) The term independent research organization (IRO) means a nonprofit research and development corporation or association organized under the laws of any state for the purpose of carrying out research and... which may be classified as indirect costs in all situations. However, typical examples of indirect costs...

15 CFR 295.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... activity. (g) The term independent research organization (IRO) means a nonprofit research and development corporation or association organized under the laws of any state for the purpose of carrying out research and... which may be classified as indirect costs in all situations. However, typical examples of indirect costs...

15 CFR 295.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... activity. (g) The term independent research organization (IRO) means a nonprofit research and development corporation or association organized under the laws of any state for the purpose of carrying out research and... which may be classified as indirect costs in all situations. However, typical examples of indirect costs...

15 CFR 295.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... activity. (g) The term independent research organization (IRO) means a nonprofit research and development corporation or association organized under the laws of any state for the purpose of carrying out research and... which may be classified as indirect costs in all situations. However, typical examples of indirect costs...

Don't Forget the Reflector.

ERIC Educational Resources Information Center

Morton, N.

1991-01-01

Various modes of reflection are classified and practical examples of devices, such as cat's eyes, are discussed. Typical light rays are traced through several systems, providing exercises with varying degrees of difficulty. Corner-cube retroreflectors, glass spheres, reflecting luminaries, light concentrators, parabolic reflectors, and off-set and…

40 CFR 1048.801 - What definitions apply to this part?

Code of Federal Regulations, 2010 CFR

2010-07-01

.... Exhaust-gas recirculation (EGR), turbochargers, and oxygen sensors are not aftertreatment. Aircraft means... device means any element of design that senses temperature, motive speed, engine rpm, transmission gear... oxygen. For example, stoichiometric combustion in a gasoline-fueled engine typically occurs at an air...

40 CFR 1048.801 - What definitions apply to this part?

Code of Federal Regulations, 2013 CFR

2013-07-01

.... Exhaust-gas recirculation (EGR), turbochargers, and oxygen sensors are not aftertreatment. Aircraft means... device means any element of design that senses temperature, motive speed, engine rpm, transmission gear... oxygen. For example, stoichiometric combustion in a gasoline-fueled engine typically occurs at an air...

40 CFR 1048.801 - What definitions apply to this part?

Code of Federal Regulations, 2014 CFR

2014-07-01

.... Exhaust-gas recirculation (EGR), turbochargers, and oxygen sensors are not aftertreatment. Aircraft means... device means any element of design that senses temperature, motive speed, engine rpm, transmission gear... oxygen. For example, stoichiometric combustion in a gasoline-fueled engine typically occurs at an air...

Plant chromosomes from end to end: telomeres, heterochromatin and centromeres.

PubMed

Lamb, Jonathan C; Yu, Weichang; Han, Fangpu; Birchler, James A

2007-04-01

Recent evidence indicates that heterochromatin in plants is composed of heterogeneous sequences, which are usually composed of transposable elements or tandem repeat arrays. These arrays are associated with chromatin modifications that produce a closed configuration that limits transcription. Centromere sequences in plants are usually composed of tandem repeat arrays that are homogenized across the genome. Analysis of such arrays in closely related taxa suggests a rapid turnover of the repeat unit that is typical of a particular species. In addition, two lines of evidence for an epigenetic component of centromere specification have been reported, namely an example of a neocentromere formed over sequences without the typical repeat array and examples of centromere inactivation. Although the telomere repeat unit is quite prevalent in the plant kingdom, unusual repeats have been found in some families. Recently, it was demonstrated that the introduction of telomere sequences into plants cells causes truncation of the chromosomes, and that this technique can be used to produce artificial chromosome platforms.

Mean of the typical decoding rates: a new translation efficiency index based on the analysis of ribosome profiling data.

PubMed

Dana, Alexandra; Tuller, Tamir

2014-12-01

Gene translation modeling and prediction is a fundamental problem that has numerous biomedical implementations. In this work we present a novel, user-friendly tool/index for calculating the mean of the typical decoding rates that enables predicting translation elongation efficiency of protein coding genes for different tissue types, developmental stages, and experimental conditions. The suggested translation efficiency index is based on the analysis of the organism's ribosome profiling data. This index could be used for example to predict changes in translation elongation efficiency of lowly expressed genes that usually have relatively low and/or biased ribosomal densities and protein levels measurements, or can be used for example for predicting translation efficiency of new genetically engineered genes. We demonstrate the usability of this index via the analysis of six organisms in different tissues and developmental stages. Distributable cross platform application and guideline are available for download at: http://www.cs.tau.ac.il/~tamirtul/MTDR/MTDR_Install.html. Copyright © 2015 Dana and Tuller.

International Space Station External Contamination Status

NASA Technical Reports Server (NTRS)

Mikatarian, Ron; Soares, Carlos

2000-01-01

PResentation slides examine external contamination requirements; International Space Station (ISS) external contamination sources; ISS external contamination sensitive surfaces; external contamination control; external contamination control for pre-launch verification; flight experiments and observations; the Space Shuttle Orbiter waste water dump, materials outgassing, active vacuum vents; example of molecular column density profile, modeling and analysis tools; sources of outgassing induced contamination analyzed to date, quiescent sources, observations on optical degradation due to induced external contamination in LEO; examples of typical contaminant and depth profiles; and status of the ISS system, material outgassing, thruster plumes, and optical degradation.

Underwater Sound Propagation from Marine Pile Driving.

PubMed

Reyff, James A

2016-01-01

Pile driving occurs in a variety of nearshore environments that typically have very shallow-water depths. The propagation of pile-driving sound in water is complex, where sound is directly radiated from the pile as well as through the ground substrate. Piles driven in the ground near water bodies can produce considerable underwater sound energy. This paper presents examples of sound propagation through shallow-water environments. Some of these examples illustrate the substantial variation in sound amplitude over time that can be critical to understand when computing an acoustic-based safety zone for aquatic species.

Survey of energy harvesting and energy scavenging approaches for on-site powering of wireless sensor- and microinstrument-networks

NASA Astrophysics Data System (ADS)

Lee, D.; Dulai, G.; Karanassios, Vassili

2013-05-01

Energy (or power) harvesting can be defined as the gathering and either storing or immediately using energy "freely" available in a local environment. Examples include harvesting energy from obvious sources such as photon-fluxes (e.g., solar), or wind or water waves, or from unusual sources such as naturally occurring pH differences. Energy scavenging can be defined as gathering and storing or immediately re-using energy that has been discarded, for instance, waste heat from air conditioning units, from in-door lights or from everyday actions such as walking or from body-heat. Although the power levels that can be harvested or scavenged are typically low (e.g., from nWatt/cm2 to mWatt/cm2), the key motivation is to harvest or to scavenge energy for a wide variety of applications. Example applications include powering devices in remote weather stations, or wireless Bluetooth headsets, or wearable computing devices or for sensor networks for health and bio-medical applications. Beyond sensors and sensor networks, there is a need to power compete systems, such as portable and energy-autonomous chemical analysis microinstruments for use on-site. A portable microinstrument is one that offers the same functionality as a large one but one that has at least one critical component in the micrometer regime. This paper surveys continuous or discontinuous energy harvesting and energy scavenging approaches (with particular emphasis on sensor and microinstrument networks) and it discusses current trends. It also briefly explores potential future directions, for example, for nature-inspired (e.g., photosynthesis), for human-power driven (e.g., for biomedical applications, or for wearable sensor networks) or for nanotechnology-enabled energy harvesting and energy scavenging approaches.

Metrology of human-based and other qualitative measurements

NASA Astrophysics Data System (ADS)

Pendrill, Leslie; Petersson, Niclas

2016-09-01

The metrology of human-based and other qualitative measurements is in its infancy—concepts such as traceability and uncertainty are as yet poorly developed. This paper reviews how a measurement system analysis approach, particularly invoking as performance metric the ability of a probe (such as a human being) acting as a measurement instrument to make a successful decision, can enable a more general metrological treatment of qualitative observations. Measures based on human observations are typically qualitative, not only in sectors, such as health care, services and safety, where the human factor is obvious, but also in customer perception of traditional products of all kinds. A principal challenge is that the usual tools of statistics normally employed for expressing measurement accuracy and uncertainty will probably not work reliably if relations between distances on different portions of scales are not fully known, as is typical of ordinal or other qualitative measurements. A key enabling insight is to connect the treatment of decision risks associated with measurement uncertainty to generalized linear modelling (GLM). Handling qualitative observations in this way unites information theory, the perceptive identification and choice paradigms of psychophysics. The Rasch invariant measure psychometric GLM approach in particular enables a proper treatment of ordinal data; a clear separation of probe and item attribute estimates; simple expressions for instrument sensitivity; etc. Examples include two aspects of the care of breast cancer patients, from diagnosis to rehabilitation. The Rasch approach leads in turn to opportunities of establishing metrological references for quality assurance of qualitative measurements. In psychometrics, one could imagine a certified reference for knowledge challenge, for example, a particular concept in understanding physics or for product quality of a certain health care service. Multivariate methods, such as Principal Component Regression, can also be improved by exploiting the increased resolution of the Rasch approach.

High-Temperature Adhesive Strain Gage Developed

NASA Technical Reports Server (NTRS)

Pereira, J. Michael; Roberts, Gary D.

1997-01-01

Researchers at the NASA Lewis Research Center have developed a unique strain gage and adhesive system for measuring the mechanical properties of polymers and polymer composites at elevated temperatures. This system overcomes some of the problems encountered in using commercial strain gages and adhesives. For example, typical commercial strain gage adhesives require a postcure at temperatures substantially higher than the maximum test temperature. The exposure of the specimen to this temperature may affect subsequent results, and in some cases may be higher than the glass-transition temperature of the polymer. In addition, although typical commercial strain gages can be used for short times at temperatures up to 370 C, their long-term use is limited to 230 C. This precludes their use for testing some high-temperature polyimides near their maximum temperature capability. Lewis' strain gage and adhesive system consists of a nonencapsulated, unbacked gage grid that is bonded directly to the polymer after the specimen has been cured but prior to the normal postcure cycle. The gage is applied with an adhesive specially formulated to cure under the specimen postcure conditions. Special handling, mounting, and electrical connection procedures were developed, and a fixture was designed to calibrate each strain gage after it was applied to a specimen. A variety of tests was conducted to determine the performance characteristics of the gages at elevated temperatures on PMR-15 neat resin and titanium specimens. For these tests, which included static tension, thermal exposure, and creep tests, the gage and adhesive system performed within normal strain gage specifications at 315 C. An example of the performance characteristics of the gage can be seen in the figure, which compares the strain gage measurement on a polyimide specimen at 315 C with an extensometer measurement.

Aphasia and Auditory Processing after Stroke through an International Classification of Functioning, Disability and Health Lens

PubMed Central

Purdy, Suzanne C.; Wanigasekara, Iruni; Cañete, Oscar M.; Moore, Celia; McCann, Clare M.

2016-01-01

Aphasia is an acquired language impairment affecting speaking, listening, reading, and writing. Aphasia occurs in about a third of patients who have ischemic stroke and significantly affects functional recovery and return to work. Stroke is more common in older individuals but also occurs in young adults and children. Because people experiencing a stroke are typically aged between 65 and 84 years, hearing loss is common and can potentially interfere with rehabilitation. There is some evidence for increased risk and greater severity of sensorineural hearing loss in the stroke population and hence it has been recommended that all people surviving a stroke should have a hearing test. Auditory processing difficulties have also been reported poststroke. The International Classification of Functioning, Disability and Health (ICF) can be used as a basis for describing the effect of aphasia, hearing loss, and auditory processing difficulties on activities and participation. Effects include reduced participation in activities outside the home such as work and recreation and difficulty engaging in social interaction and communicating needs. A case example of a young man (M) in his 30s who experienced a left-hemisphere ischemic stroke is presented. M has normal hearing sensitivity but has aphasia and auditory processing difficulties based on behavioral and cortical evoked potential measures. His principal goal is to return to work. Although auditory processing difficulties (and hearing loss) are acknowledged in the literature, clinical protocols typically do not specify routine assessment. The literature and the case example presented here suggest a need for further research in this area and a possible change in practice toward more routine assessment of auditory function post-stroke. PMID:27489401

Three typical examples of activation of the international charter space and major disasters

NASA Astrophysics Data System (ADS)

Bessis, J.; Bequignon, J.; Mahmood, A.

The purpose of the International Charter is to provide a unified system of space data acquisition and delivery for users affected by disasters, to promote co - operation between space agencies and space system operators and to allow participation in the organisation of emergency assistance or subsequent operations. The Charter which is officially in operation since November 1, 2000 was signed on June 20, 2000 by CNES (1) and ESA (2) and enlarged later on with the membership of the CSA (3) in October 2000 and of the NOAA (4) and the ISRO (5), both in September 2001. All Partner agencies undertake to co-operate on a voluntary basis with no exchange of funds between them in the event of a major natural or man-induced disaster. This paper, after a brief description of the Charter organisation and of its implementation procedures, addresses three typical cases of Charter activation and the lessons learned to date. The first example will deal with the major earthquakes in January and February 2001 in El Salvador for the benefit of the Salvadorian National Register Centre, the second concerning flooding in the North East of France early 2002 with quick delivery of flood maps to the French Civil Protection Authority and the last one will focus on the Nyiragongo volcanic eruption near the town of Goma in the Democratic Republic of Congo. It will include feedback from the Authorised Users concerning the usefulness of the Charter and the suggested improvements in terms of response time, sensors capability and resolution, delivered products (scale and ease of operational utilisation) and adapted scenarios.(1) Centre National d'Etudes Spatiales, (2) European Space Agency, (3) Canadian Space Agency, (4) National Oceanic and Atmospheric Administration , (5) Indian Space Research Organisation

64. Paynes Creek Culvert. This concrete box culvert is a ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

64. Paynes Creek Culvert. This concrete box culvert is a typical example of a concrete box culvert finished with rusticated stone. Its arches reflect the rigid frame structures. Looking west. - Blue Ridge Parkway, Between Shenandoah National Park & Great Smoky Mountains, Asheville, Buncombe County, NC

Performing Inferential Statistics Prior to Data Collection

ERIC Educational Resources Information Center

Trafimow, David; MacDonald, Justin A.

2017-01-01

Typically, in education and psychology research, the investigator collects data and subsequently performs descriptive and inferential statistics. For example, a researcher might compute group means and use the null hypothesis significance testing procedure to draw conclusions about the populations from which the groups were drawn. We propose an…

Rapid qualitative and quantitative analysis of proanthocyanidin oligomers and polymers by UPLC-MS/MS

USDA-ARS?s Scientific Manuscript database

Proanthocyanidins (PAs) are a structurally complex and bioactive group of tannins. Detailed analysis of PA concentration, composition, and structure typically requires the use of one or more time-consuming analytical methods. For example, the commonly employed thiolysis and phloroglucinolysis method...

Teaching Receptor Theory to Biochemistry Undergraduates

ERIC Educational Resources Information Center

Benore-Parsons, Marilee; Sufka, Kenneth J.

2003-01-01

Receptor:ligand interactions account for numerous reactions critical to biochemistry and molecular biology. While students are typically exposed to some examples, such as hemoglobin binding of oxygen and signal transduction pathways, the topic could easily be expanded. Theory and kinetic analysis, types of receptors, and the experimental assay…

Cultivating Deductive Thinking with Angle Chasing

ERIC Educational Resources Information Center

Edwards, Michael todd; Quinlan, James; Harper, Suzanne R.; Cox, Dana C.; Phelps, Steve

2014-01-01

Despite Common Core State Standards for Mathematics (CCSSI 2010) recommendations, too often students' introduction to proof consists of the study of formal axiomatic systems--for example, triangle congruence proofs--typically in an introductory geometry course with no connection back to previous work in earlier algebra courses. Van Hiele…

The Pythagorean Roots of Introductory Physics

ERIC Educational Resources Information Center

Clarage, James B.

2013-01-01

Much of the mathematical reasoning employed in the typical introductory physics course can be traced to Pythagorean roots planted over two thousand years ago. Besides obvious examples involving the Pythagorean theorem, I draw attention to standard physics problems and derivations which often unknowingly rely upon the Pythagoreans' work on…

Joint Doctrine for Barriers, Obstacles, and Mine Warfare

DTIC Science & Technology

1999-02-24

of explosives. Typical tactical examples are barbed wire obstacles and tank ditches. Operational and strategic barriers and obstacles may also be...total of 10 ocean minesweepers, 9 amphibious ships, 6 fleet tugs, 3 salvage ships, and 19 destroyers. Twenty-four CH-53D Sea Stallions from Marine

NGC 2617 brightens again after long very low state

NASA Astrophysics Data System (ADS)

Oknyansky, V.; Lipunov, V. M.; Shatsky, N. I.; Gorbovskoy, E. S.; Tatarnikov, A. M.; Metlov, V. G.; Burlak, M. A.; Gaskell, C. M.; Huseynov, N. A.; Mikailov, Kh. M.; Alekberov, I. A.; Tsygankov, S. S.; Brotherton, M. B.; Kasper, D.; Du, P.; Chen, X.; Buckley, D. A. H.; Winkler, H.; Paul, B.; van Wyk, F.; Rebolo, R.; Serra-Ricart, M.; Podesta, R.; Levato, H.

2018-06-01

NGC 2617 is typical example of a changing-look AGN. It has been observed to undergo a dramatic change from a largely obscured Seyfert 1.8 to an unobscured Seyfert 1 from 2003 to 2013 (Shappee et al. 2013, ATel #5010, Shappee et al. 2014).

Immortalized sheep microglia are permissive to a diverse range of ruminant viruses.

USDA-ARS?s Scientific Manuscript database

Small ruminants are important agricultural species worldwide; however, diagnostics and research of small ruminant infectious diseases typically rely on cattle-based reagents. One example of this is the lack of small ruminant-derived cell lines to diagnose and study small ruminant viruses. Furtherm...

Design and Management Criteria for Fish, Amphibian, and Reptile Communities Within Created Agricultural Wetlands

USDA-ARS?s Scientific Manuscript database

Design and management criteria for created agricultural wetlands in the midwestern United States typically focus on maximizing the ability to process agricultural runoff. Ecological benefits for fish, amphibian, and reptiles are often secondary considerations. One example of this water quality focu...

The Thermodynamics of Interior Ballistics and Propellant Performance

DTIC Science & Technology

2013-11-01

constant volume and energy. This is referred to as the “chamber” condition, where the propellant is all burnt . IB codes typically use the...for the remainder of this work are performed using BLAKE and illustrated using BLAKE commands as concrete examples of the required computations. It

Reviewing Teamwork Activities.

ERIC Educational Resources Information Center

Larcher, Bob

2001-01-01

When working on tasks or projects, teams typically go through four phases: initiation, creation, elaboration, and completion. Each phase is explained, and two examples illustrate how the model is used after an orienteering exercise to help corporate management teams understand their way of functioning and identify strengths and development points.…

Algorithm design for automated transportation photo enforcement camera image and video quality diagnostic check modules

NASA Astrophysics Data System (ADS)

Raghavan, Ajay; Saha, Bhaskar

2013-03-01

Photo enforcement devices for traffic rules such as red lights, toll, stops, and speed limits are increasingly being deployed in cities and counties around the world to ensure smooth traffic flow and public safety. These are typically unattended fielded systems, and so it is important to periodically check them for potential image/video quality problems that might interfere with their intended functionality. There is interest in automating such checks to reduce the operational overhead and human error involved in manually checking large camera device fleets. Examples of problems affecting such camera devices include exposure issues, focus drifts, obstructions, misalignment, download errors, and motion blur. Furthermore, in some cases, in addition to the sub-algorithms for individual problems, one also has to carefully design the overall algorithm and logic to check for and accurately classifying these individual problems. Some of these issues can occur in tandem or have the potential to be confused for each other by automated algorithms. Examples include camera misalignment that can cause some scene elements to go out of focus for wide-area scenes or download errors that can be misinterpreted as an obstruction. Therefore, the sequence in which the sub-algorithms are utilized is also important. This paper presents an overview of these problems along with no-reference and reduced reference image and video quality solutions to detect and classify such faults.

Variance-reduced simulation of lattice discrete-time Markov chains with applications in reaction networks

NASA Astrophysics Data System (ADS)

Maginnis, P. A.; West, M.; Dullerud, G. E.

2016-10-01

We propose an algorithm to accelerate Monte Carlo simulation for a broad class of stochastic processes. Specifically, the class of countable-state, discrete-time Markov chains driven by additive Poisson noise, or lattice discrete-time Markov chains. In particular, this class includes simulation of reaction networks via the tau-leaping algorithm. To produce the speedup, we simulate pairs of fair-draw trajectories that are negatively correlated. Thus, when averaged, these paths produce an unbiased Monte Carlo estimator that has reduced variance and, therefore, reduced error. Numerical results for three example systems included in this work demonstrate two to four orders of magnitude reduction of mean-square error. The numerical examples were chosen to illustrate different application areas and levels of system complexity. The areas are: gene expression (affine state-dependent rates), aerosol particle coagulation with emission and human immunodeficiency virus infection (both with nonlinear state-dependent rates). Our algorithm views the system dynamics as a ;black-box;, i.e., we only require control of pseudorandom number generator inputs. As a result, typical codes can be retrofitted with our algorithm using only minor changes. We prove several analytical results. Among these, we characterize the relationship of covariances between paths in the general nonlinear state-dependent intensity rates case, and we prove variance reduction of mean estimators in the special case of affine intensity rates.

A convenient and accurate parallel Input/Output USB device for E-Prime.

PubMed

Canto, Rosario; Bufalari, Ilaria; D'Ausilio, Alessandro

2011-03-01

Psychological and neurophysiological experiments require the accurate control of timing and synchrony for Input/Output signals. For instance, a typical Event-Related Potential (ERP) study requires an extremely accurate synchronization of stimulus delivery with recordings. This is typically done via computer software such as E-Prime, and fast communications are typically assured by the Parallel Port (PP). However, the PP is an old and disappearing technology that, for example, is no longer available on portable computers. Here we propose a convenient USB device enabling parallel I/O capabilities. We tested this device against the PP on both a desktop and a laptop machine in different stress tests. Our data demonstrate the accuracy of our system, which suggests that it may be a good substitute for the PP with E-Prime.

Dimensional analysis using toric ideals: primitive invariants.

PubMed

Atherton, Mark A; Bates, Ronald A; Wynn, Henry P

2014-01-01

Classical dimensional analysis in its original form starts by expressing the units for derived quantities, such as force, in terms of power products of basic units [Formula: see text] etc. This suggests the use of toric ideal theory from algebraic geometry. Within this the Graver basis provides a unique primitive basis in a well-defined sense, which typically has more terms than the standard Buckingham approach. Some textbook examples are revisited and the full set of primitive invariants found. First, a worked example based on convection is introduced to recall the Buckingham method, but using computer algebra to obtain an integer [Formula: see text] matrix from the initial integer [Formula: see text] matrix holding the exponents for the derived quantities. The [Formula: see text] matrix defines the dimensionless variables. But, rather than this integer linear algebra approach it is shown how, by staying with the power product representation, the full set of invariants (dimensionless groups) is obtained directly from the toric ideal defined by [Formula: see text]. One candidate for the set of invariants is a simple basis of the toric ideal. This, although larger than the rank of [Formula: see text], is typically not unique. However, the alternative Graver basis is unique and defines a maximal set of invariants, which are primitive in a simple sense. In addition to the running example four examples are taken from: a windmill, convection, electrodynamics and the hydrogen atom. The method reveals some named invariants. A selection of computer algebra packages is used to show the considerable ease with which both a simple basis and a Graver basis can be found.

Continuous counter-current chromatography for capture and polishing steps in biopharmaceutical production.

PubMed

Steinebach, Fabian; Müller-Späth, Thomas; Morbidelli, Massimo

2016-09-01

The economic advantages of continuous processing of biopharmaceuticals, which include smaller equipment and faster, efficient processes, have increased interest in this technology over the past decade. Continuous processes can also improve quality assurance and enable greater controllability, consistent with the quality initiatives of the FDA. Here, we discuss different continuous multi-column chromatography processes. Differences in the capture and polishing steps result in two different types of continuous processes that employ counter-current column movement. Continuous-capture processes are associated with increased productivity per cycle and decreased buffer consumption, whereas the typical purity-yield trade-off of classical batch chromatography can be surmounted by continuous processes for polishing applications. In the context of continuous manufacturing, different but complementary chromatographic columns or devices are typically combined to improve overall process performance and avoid unnecessary product storage. In the following, these various processes, their performances compared with batch processing and resulting product quality are discussed based on a review of the literature. Based on various examples of applications, primarily monoclonal antibody production processes, conclusions are drawn about the future of these continuous-manufacturing technologies. Copyright © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Achieving thermography with a thermal security camera using uncooled amorphous silicon microbolometer image sensors

NASA Astrophysics Data System (ADS)

Wang, Yu-Wei; Tesdahl, Curtis; Owens, Jim; Dorn, David

2012-06-01

Advancements in uncooled microbolometer technology over the last several years have opened up many commercial applications which had been previously cost prohibitive. Thermal technology is no longer limited to the military and government market segments. One type of thermal sensor with low NETD which is available in the commercial market segment is the uncooled amorphous silicon (α-Si) microbolometer image sensor. Typical thermal security cameras focus on providing the best image quality by auto tonemaping (contrast enhancing) the image, which provides the best contrast depending on the temperature range of the scene. While this may provide enough information to detect objects and activities, there are further benefits of being able to estimate the actual object temperatures in a scene. This thermographic ability can provide functionality beyond typical security cameras by being able to monitor processes. Example applications of thermography[2] with thermal camera include: monitoring electrical circuits, industrial machinery, building thermal leaks, oil/gas pipelines, power substations, etc...[3][5] This paper discusses the methodology of estimating object temperatures by characterizing/calibrating different components inside a thermal camera utilizing an uncooled amorphous silicon microbolometer image sensor. Plots of system performance across camera operating temperatures will be shown.

Centrifugal compressor surge detecting method based on wavelet analysis of unsteady pressure fluctuations in typical stages

NASA Astrophysics Data System (ADS)

Izmaylov, R.; Lebedev, A.

2015-08-01

Centrifugal compressors are complex energy equipment. Automotive control and protection system should meet the requirements: of operation reliability and durability. In turbocompressors there are at least two dangerous areas: surge and rotating stall. Antisurge protecting systems usually use parametric or feature methods. As a rule industrial system are parametric. The main disadvantages of anti-surge parametric systems are difficulties in mass flow measurements in natural gas pipeline compressor. The principal idea of feature method is based on the experimental fact: as a rule just before the onset of surge rotating or precursor stall established in compressor. In this case the problem consists in detecting of unsteady pressure or velocity fluctuations characteristic signals. Wavelet analysis is the best method for detecting onset of rotating stall in spite of high level of spurious signals (rotating wakes, turbulence, etc.). This method is compatible with state of the art DSP systems of industrial control. Examples of wavelet analysis application for detecting onset of rotating stall in typical stages centrifugal compressor are presented. Experimental investigations include unsteady pressure measurement and sophisticated data acquisition system. Wavelet transforms used biorthogonal wavelets in Mathlab systems.

Test and evaluation of the Argonne BPAC10 Series air chamber calorimeter designed for 20 minute measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perry, R.B.; Fiarman, S.; Jung, E.A.

1990-10-01

This paper is the final report on DOE-OSS Task ANLE88002 Fast Air Chamber Calorimetry.'' The task objective was to design, construct, and test an isothermal air chamber calorimeter for plutonium assay of bulk samples that would meet the following requirements for sample power measurement: average sample measurement time less than 20 minutes. Measurement of samples with power output up to 10 W. Precision of better than 1% RSD for sample power greater than 1 W. Precision better than 0.010 watt SD, for sample power less than 1 W. This report gives a description of the calorimeter hardware and software andmore » discusses the test results. The instrument operating procedure, included as an appendix, gives examples of typical input/output and explains the menu driven software. Sample measurement time of less than 20 minutes was attained by pre-equilibration of the samples in low cost precision preheaters and by prediction of equilibrium measurements. Tests at the TA55 Plutonium Facility at Los Alamos National Laboratory, on typical samples, indicates that the instrument meets all the measurement requirements.« less

EVA Development and Verification Testing at NASA's Neutral Buoyancy Laboratory

NASA Technical Reports Server (NTRS)

Jairala, Juniper C.; Durkin, Robert; Marak, Ralph J.; Sipila, Stepahnie A.; Ney, Zane A.; Parazynski, Scott E.; Thomason, Arthur H.

2012-01-01

As an early step in the preparation for future Extravehicular Activities (EVAs), astronauts perform neutral buoyancy testing to develop and verify EVA hardware and operations. Neutral buoyancy demonstrations at NASA Johnson Space Center's Sonny Carter Training Facility to date have primarily evaluated assembly and maintenance tasks associated with several elements of the International Space Station (ISS). With the retirement of the Shuttle, completion of ISS assembly, and introduction of commercial players for human transportation to space, evaluations at the Neutral Buoyancy Laboratory (NBL) will take on a new focus. Test objectives are selected for their criticality, lack of previous testing, or design changes that justify retesting. Assembly tasks investigated are performed using procedures developed by the flight hardware providers and the Mission Operations Directorate (MOD). Orbital Replacement Unit (ORU) maintenance tasks are performed using a more systematic set of procedures, EVA Concept of Operations for the International Space Station (JSC-33408), also developed by the MOD. This paper describes the requirements and process for performing a neutral buoyancy test, including typical hardware and support equipment requirements, personnel and administrative resource requirements, examples of ISS systems and operations that are evaluated, and typical operational objectives that are evaluated.

Xpatch prediction improvements to support multiple ATR applications

NASA Astrophysics Data System (ADS)

Andersh, Dennis J.; Lee, Shung W.; Moore, John T.; Sullivan, Douglas P.; Hughes, Jeff A.; Ling, Hao

1998-08-01

This paper describes an electromagnetic computer prediction code for generating radar cross section (RCS), time-domain signature sand synthetic aperture radar (SAR) images of realistic 3D vehicles. The vehicle, typically an airplane or a ground vehicle, is represented by a computer-aided design (CAD) file with triangular facets, IGES curved surfaces, or solid geometries.The computer code, Xpatch, based on the shooting-and-bouncing-ray technique, is used to calculate the polarimetric radar return from the vehicles represented by these different CAD files. Xpatch computers the first- bounce physical optics (PO) plus the physical theory of diffraction (PTD) contributions. Xpatch calculates the multi-bounce ray contributions by using geometric optics and PO for complex vehicles with materials. It has been found that the multi-bounce calculations, the radar return in typically 10 to 15 dB too low. Examples of predicted range profiles, SAR, imagery, and RCS for several different geometries are compared with measured data to demonstrate the quality of the predictions. Recent enhancements to Xpatch include improvements for millimeter wave applications and hybridization with finite element method for small geometric features and augmentation of additional IGES entities to support trimmed and untrimmed surfaces.

Time-Dependent Behavior of Diabase and a Nonlinear Creep Model

NASA Astrophysics Data System (ADS)

Yang, Wendong; Zhang, Qiangyong; Li, Shucai; Wang, Shugang

2014-07-01

Triaxial creep tests were performed on diabase specimens from the dam foundation of the Dagangshan hydropower station, and the typical characteristics of creep curves were analyzed. Based on the test results under different stress levels, a new nonlinear visco-elasto-plastic creep model with creep threshold and long-term strength was proposed by connecting an instantaneous elastic Hooke body, a visco-elasto-plastic Schiffman body, and a nonlinear visco-plastic body in series mode. By introducing the nonlinear visco-plastic component, this creep model can describe the typical creep behavior, which includes the primary creep stage, the secondary creep stage, and the tertiary creep stage. Three-dimensional creep equations under constant stress conditions were deduced. The yield approach index (YAI) was used as the criterion for the piecewise creep function to resolve the difficulty in determining the creep threshold value and the long-term strength. The expression of the visco-plastic component was derived in detail and the three-dimensional central difference form was given. An example was used to verify the credibility of the model. The creep parameters were identified, and the calculated curves were in good agreement with the experimental curves, indicating that the model is capable of replicating the physical processes.

Market niche analysis in the casino gaming industry.

PubMed

Dandurand, L

1990-03-01

This article discusses the nature of market niche analysis in the casino gaming industry. It presents four approaches for conducting market niche analysis. An an example of one approach, the Las Vegas Visitor Profile Study is used to identify a premium niche in the Las Vegas Slot Target Market. A detailed examination of the premium niche profile provides a description of the typical premium slot player. The description of the typical premium player leads to hypotheses regarding needs (the unique preference set) of the premium player. An analysis of the unique preference set suggests an appropriate enhanced marketing program.

REMPI-TOFMS for on-line monitoring and controlling the coffee roasting process

NASA Astrophysics Data System (ADS)

Dorfner, Ralph; Ferge, Thomas; Yeretzian, Chahan; Zimmermann, Ralf; Kettrup, Antonius

2001-08-01

REMPI@266nm-TOFMS is used for on-line analysis of the coffee roasting process. Volatile and flavor active compounds of coffee were ionized by REMPI@266nm and monitored on-line and in real-time by TOFMS during the coffee roasting process. The phenol and 4-vinylguaiacol time-intensity profiles, for example, show typical behavior for different roasting temperatures and provide an indicator to the achieved degree of roasting. The impact of the moisture level of the green coffee beans on the time shift of a typical (commercial) roasting time, correlates with REMPI-TOFMS measurements and literature data.

Noise Gating Solar Images

NASA Astrophysics Data System (ADS)

DeForest, Craig; Seaton, Daniel B.; Darnell, John A.

2017-08-01

I present and demonstrate a new, general purpose post-processing technique, "3D noise gating", that can reduce image noise by an order of magnitude or more without effective loss of spatial or temporal resolution in typical solar applications.Nearly all scientific images are, ultimately, limited by noise. Noise can be direct Poisson "shot noise" from photon counting effects, or introduced by other means such as detector read noise. Noise is typically represented as a random variable (perhaps with location- or image-dependent characteristics) that is sampled once per pixel or once per resolution element of an image sequence. Noise limits many aspects of image analysis, including photometry, spatiotemporal resolution, feature identification, morphology extraction, and background modeling and separation.Identifying and separating noise from image signal is difficult. The common practice of blurring in space and/or time works because most image "signal" is concentrated in the low Fourier components of an image, while noise is evenly distributed. Blurring in space and/or time attenuates the high spatial and temporal frequencies, reducing noise at the expense of also attenuating image detail. Noise-gating exploits the same property -- "coherence" -- that we use to identify features in images, to separate image features from noise.Processing image sequences through 3-D noise gating results in spectacular (more than 10x) improvements in signal-to-noise ratio, while not blurring bright, resolved features in either space or time. This improves most types of image analysis, including feature identification, time sequence extraction, absolute and relative photometry (including differential emission measure analysis), feature tracking, computer vision, correlation tracking, background modeling, cross-scale analysis, visual display/presentation, and image compression.I will introduce noise gating, describe the method, and show examples from several instruments (including SDO/AIA , SDO/HMI, STEREO/SECCHI, and GOES-R/SUVI) that explore the benefits and limits of the technique.

Learning to Succeed at Scale

ERIC Educational Resources Information Center

Higgins, Monica; Hess, Frederick M.

2009-01-01

Dynamic new ventures like the Knowledge is Power Program, Teach For America, and New Leaders for New Schools, are increasingly being asked to step in to assist struggling school districts. While promising, these ventures have thus far typically been characterized by "one-off" examples of success that are extraordinarily reliant on talent and…

Organizational Decision Making

DTIC Science & Technology

1975-08-01

the lack of formal techniques typically used by large organizations, digress on the advantages of formal over informal... optimization ; for example one might do a number of optimization calculations, each time using a different measure of effectiveness as the optimized ...final decision. The next level of computer application involves the use of computerized optimization techniques. Optimization

Cathodoluminescence Petrography: A Valuable Tool for Teaching and Research.

ERIC Educational Resources Information Center

Kopp, Otto C.

1981-01-01

Cathodoluminescence is visible light emitted from a specimen when it is bombarded with electrons. A technique known as cathodoluminescence petrography can provide information especially useful in studies or courses related to mineralogy and petrology. The technique is briefly presented, along with examples to illustrate typical results. (Author/WB)

29 CFR 778.206 - Premiums for work outside basic workday or workweek-examples.

Code of Federal Regulations, 2011 CFR

2011-07-01

...)(7) where “clock pattern” premiums are paid may be illustrated by reference to provisions typical of... contract should be higher because of handling dangerous or obnoxious cargo, recognition of skill... agreements following this general pattern exist in other industries. [46 FR 7311, Jan. 23, 1981] ...

29 CFR 778.206 - Premiums for work outside basic workday or workweek-examples.

Code of Federal Regulations, 2010 CFR

2010-07-01

...)(7) where “clock pattern” premiums are paid may be illustrated by reference to provisions typical of... contract should be higher because of handling dangerous or obnoxious cargo, recognition of skill... agreements following this general pattern exist in other industries. [46 FR 7311, Jan. 23, 1981] ...

Greening the CWA consent decree - some examples of collaborative research amongst USEPA and municipalities

EPA Science Inventory

Combined sewer overflows (CSOs) violate the Clean Water Act Enforcement of CWA boils down to settlements with US cities – typically billions of dollars Green Infrastructure (GI) has come into view as part of consent decree settlements These settlements are a primary way to rehab...

Theoretical Insights for Practical Handling of Pressurized Fluids

ERIC Educational Resources Information Center

Aranda, Alfonso; Rodriguez, Maria del Prado

2006-01-01

The practical scenarios discussed in a chemistry or chemical engineering course that use solid or liquid reactants are presented. Important ideas to be considered when handling pressurized fluids are provided and three typical examples are described to enable students develop secondary skills such as the selective search of data, identification of…

Soil quality monitoring: Examples of existing protocols

Treesearch

Daniel G. Neary; Carl C. Trettin; Deborah Page-Dumroese

2010-01-01

Many forestry and agricultural agencies and organizations worldwide have developed soil monitoring and quality standards and guidelines to ensure future sustainability of land management. These soil monitoring standards are typically developed in response to international initiatives such as the Montreal Process, the Helsinki Ministerial Conference,or in support of...

Soil quality monitoring: examples of existing protocols

Treesearch

Daniel G. Neary; Carl C. Trettin; Deborah Page-Dumroese

2010-01-01

Many forestry and agricultural agencies and organizations worldwide have developed soil monitoring and quality standards and guidelines to ensure future sustainability of land management. These soil monitoring standards are typically developed in response to international initiatives such as the Montreal Process, the Helsinki Ministerial Conference, or in support of...

Motivation as Ethical Self-Formation

ERIC Educational Resources Information Center

Clarke, Matthew; Hennig, Barbara

2013-01-01

Motivation is a concept more frequently found in venues concerned with educational psychology than in ones concerned with educational philosophy. Under the influence of psychology, and its typically dualistic way of making sense of the world, motivation in education has tended to be viewed in dichotomous terms, for example, as intrinsic or…

Mutually Exclusive, Complementary, or . . .

ERIC Educational Resources Information Center

Schloemer, Cathy G.

2016-01-01

Whether students are beginning their study of probability or are well into it, distinctions between complementary sets and mutually exclusive sets can be confusing. Cathy Schloemer writes in this article that for years she used typical classroom examples but was not happy with the student engagement or the level of understanding they produced.…

Research natural area needs in the Pacific Northwest.

Treesearch

C. T. Dyrness; Jerry F. Franklin; Chris Maser; Stanton A. Cook; James D. Hall; Glenda Faxon

1975-01-01

Research Natural Areas are examples of typical and distinctive natural ecosystems and habitats reserved for scientific and educational use. This outline of the minimal Research Natural Area system needed to provide adequate field laboratories for ecological, environmental, and land management research was developed by an interinstitutional, interdisciplinary working...

Toward a Global Sociology of Religion

ERIC Educational Resources Information Center

Parvez, Z. Fareen

2017-01-01

This article offers an example of a global approach to teaching the sociology of religion, a course that typically focuses on American religious phenomena. It builds on three interventions in the movement for a global sociology: connecting the local and global, moving beyond methodological nationalism, and developing an ethical orientation toward…

Teaching Engineering Design Through Paper Rockets

ERIC Educational Resources Information Center

Welling, Jonathan; Wright, Geoffrey A.

2018-01-01

The paper rocket activity described in this article effectively teaches the engineering design process (EDP) by engaging students in a problem-based learning activity that encourages iterative design. For example, the first rockets the students build typically only fly between 30 and 100 feet. As students test and evaluate their rocket designs,…

Syntactical Analysis of Economics Textbooks.

ERIC Educational Resources Information Center

Wilcox, George K.

An analysis of the syntax of economics textbooks was undertaken to (1) provide real-language examples of the difficult grammatical structures being taught in an advanced economics reading course, and (2) construct a factual database of the nature of economics textbooks. Five texts representative of those typically used in introductory economics…

Economic Development Strategies. Upjohn Institute Staff Working Paper 95-33.

ERIC Educational Resources Information Center

Bartik, Timothy J.

This paper, which is intended as a guide for local government managers responsible for economic development policies, begins with a discussion of typical goals and practices of local economic development programs. Examined next are examples of local government involvement in economic development efforts through policies/activities such as the…

157. ARAIII Reactor building (ARA608) Main gas loop mechanical flow ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

157. ARA-III Reactor building (ARA-608) Main gas loop mechanical flow sheet. This drawing was selected as a typical example of mechanical arrangements within reactor building. Aerojet-general 880-area/GCRE-0608-50-013-102634. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

Emergent Technological Literacy: What Do Children Bring to School?

ERIC Educational Resources Information Center

Mawson, W. B.

2013-01-01

There has been very little research into children's technological practice in early childhood settings. This article describes four typical examples of the technological activity that occurs on a daily basis in New Zealand early childhood settings. It is suggested that children come to compulsory schooling with well-developed technological…

Pop, Rock, and Folk Music: An Overlooked Resource

ERIC Educational Resources Information Center

Dubin, Fraida

1975-01-01

Proposes the use of pop, rock, and folk music as material far removed from the traditional and attuned to the learners' interests. Typical examples are analyzed with respect to phonology, grammar and semantics. A final category, "overall idea songs," linguistically unclassifiable, is found to be attractive and highly motivating. (IFS/WGA)

Stealing Thunder: African Security Sector Reform, the Military’s New Challenge

DTIC Science & Technology

2007-04-19

will become scarcer.3 If left unchecked Africa will remain an unending stew of ethnic warfare stimulating massive destabilizing and uncontrolled...this phenomenon, see: David Lamb , The Africans (New York, Random House, 1982) 149. 14 Meredith, 150 – 161. 15 For typical examples of Cold War

Whole Class Laboratories: More Examples

ERIC Educational Resources Information Center

Kouh, Minjoon

2016-01-01

Typically, introductory physics courses are taught with a combination of lectures and laboratories in which students have opportunities to discover the natural laws through hands-on activities in small groups. This article reports the use of Google Drive, a free online document-sharing tool, in physics laboratories for pooling experimental data…

Allium To Zircon: Mathematics and Nature.

ERIC Educational Resources Information Center

Harrell, Marvin E.; Fosnaugh, Linda S.

1997-01-01

Discusses how nature can illustrate mathematical structures and concepts in the classroom. For example, the upper surface of a typical leaf structure illustrates the notion of tessellating with polygons. Also lists classroom applications and hands-on activities such as growing crystals to investigate the natural forms of polyhedra and measuring…

Clinical implications of contemporary gender theory.

PubMed

Kulish, Nancy

2010-04-01

The current intellectual scene in psychoanalysis is marked by vigorous theoretical controversies about gender. The ideas being debated have important implications for clinical work, which have not been thoroughly explicated or integrated into common practice. These implications include the following: gender can accrue idiosyncratic meanings; gender identity is considered fluid and rigidity of gender identity deemed problematic; gender-related conflicts are typically described as divergent; analysis of superego conflicts related to gender becomes particularly important; and, finally, gender-related biases are seen as inevitable and must be taken into account in the clinical situation. A detailed clinical example illustrates the application of these ideas. While the more dramatic cases related to gender have been more frequent subjects of study, conflicts about gender are everyday occurrences for our patients and deserve further attention.

Mechanisms of cooperation in cancer nanomedicine: towards systems nanotechnology.

PubMed

Hauert, Sabine; Bhatia, Sangeeta N

2014-09-01

Nanoparticles are designed to deliver therapeutics and diagnostics selectively to tumors. Their size, shape, charge, material, coating, and cargo determine their individual functionalities. A systems approach could help predict the behavior of trillions of nanoparticles interacting in complex tumor environments. Engineering these nanosystems may lead to biomimetic strategies where interactions between nanoparticles and their environment give rise to cooperative behaviors typically seen in natural self-organized systems. Examples include nanoparticles that communicate the location of a tumor to amplify tumor homing or self-assemble and disassemble to optimize nanoparticle transport. The challenge is to discover which nanoparticle designs lead to a desired system behavior. To this end, novel nanomaterials, deep understanding of biology, and computational tools are emerging as the next frontier. Copyright © 2014 Elsevier Ltd. All rights reserved.

Nexus: A modular workflow management system for quantum simulation codes

NASA Astrophysics Data System (ADS)

Krogel, Jaron T.

2016-01-01

The management of simulation workflows represents a significant task for the individual computational researcher. Automation of the required tasks involved in simulation work can decrease the overall time to solution and reduce sources of human error. A new simulation workflow management system, Nexus, is presented to address these issues. Nexus is capable of automated job management on workstations and resources at several major supercomputing centers. Its modular design allows many quantum simulation codes to be supported within the same framework. Current support includes quantum Monte Carlo calculations with QMCPACK, density functional theory calculations with Quantum Espresso or VASP, and quantum chemical calculations with GAMESS. Users can compose workflows through a transparent, text-based interface, resembling the input file of a typical simulation code. A usage example is provided to illustrate the process.

Workshop on Incomplete Network Data Held at Sandia National Labs – Livermore

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soundarajan, Sucheta; Wendt, Jeremy D.

2016-06-01

While network analysis is applied in a broad variety of scientific fields (including physics, computer science, biology, and the social sciences), how networks are constructed and the resulting bias and incompleteness have drawn more limited attention. For example, in biology, gene networks are typically developed via experiment -- many actual interactions are likely yet to be discovered. In addition to this incompleteness, the data-collection processes can introduce significant bias into the observed network datasets. For instance, if you observe part of the World Wide Web network through a classic random walk, then high degree nodes are more likely to bemore » found than if you had selected nodes at random. Unfortunately, such incomplete and biasing data collection methods must be often used.« less

Design of magnets inside cylindrical superconducting shields

NASA Technical Reports Server (NTRS)

Rigby, K. W.

1988-01-01

The design of magnets inside closed, cylindrical, superconducting shields is discussed. The Green function is given for the magnetic vector potential for cylindrically symmetric currents inside such a shield. The magnetic field everywhere inside the shield can be obtained from this function, which includes the effects of the induced shield currents exactly. The field is given for a thin solenoid as an example and the convergence of the series solution for this case is discussed. The shield can significantly reduce the strength and improve the homogeneity of a magnet. The improvement in homogeneity is of particular importance in the design of correction coils. These effects, and the maximum field on the shield, are examined for a typical solenoid. The results given are also useful, although not exact, for long shields with one or two open ends.

A comparison of reliability and conventional estimation of safe fatigue life and safe inspection intervals

NASA Technical Reports Server (NTRS)

Hooke, F. H.

1972-01-01

Both the conventional and reliability analyses for determining safe fatigue life are predicted on a population having a specified (usually log normal) distribution of life to collapse under a fatigue test load. Under a random service load spectrum, random occurrences of load larger than the fatigue test load may confront and cause collapse of structures which are weakened, though not yet to the fatigue test load. These collapses are included in reliability but excluded in conventional analysis. The theory of risk determination by each method is given, and several reasonably typical examples have been worked out, in which it transpires that if one excludes collapse through exceedance of the uncracked strength, the reliability and conventional analyses gave virtually identical probabilities of failure or survival.

Rarefied-flow pitching moment coefficient measurements of the Shuttle Orbiter

NASA Technical Reports Server (NTRS)

Blanchard, R. C.; Hinson, E. W.

1988-01-01

An overview of the process for obtaining the Shuttle Orbiter rarefied-flow pitching moment from flight gyro data is presented. The extraction technique involves differentiation of the output of the pitch gyro after accounting for nonaerodynamic torques, such as those produced by gravity gradient and the Orbiter's auxiliary power unit and adjusting for drift biases. The overview of the extraction technique includes examples of results from each of the steps involved in the process, using the STS-32 mission as a typical sample case. The total pitching moment and moment coefficient (Cm) for that flight are calculated and compared with preflight predictions. The flight results show the anticipated decrease in Cm with increasing altitude. However, the total moment coefficient is less than predicted using preflight estimates.

Recent Advances of Cocktail Chemotherapy by Combination Drug Delivery Systems

PubMed Central

Hu, Quanyin; Sun, Wujin; Wang, Chao; Gu, Zhen

2016-01-01

Combination chemotherapy is widely exploited for enhanced cancer treatment in clinic. However, the traditional cocktail administration of combination regimens often suffers from varying pharmacokinetics among different drugs. The emergence of nanotechnology offers an unparalleled opportunity for developing advanced combination drug delivery strategies with the ability to encapsulate various drugs simultaneously and unify the pharmacokinetics of each drug. This review surveys the most recent advances in combination delivery of multiple small molecule chemotherapeutics using nanocarriers. The mechanisms underlying combination chemotherapy, including the synergistic, additive and potentiation effects, are also discussed with typical examples. We further highlight the sequential and site-specific co-delivery strategies, which provide new guidelines for development of programmable combination drug delivery systems. Clinical outlook and challenges are also discussed in the end. PMID:26546751

Research and education at the NASA Fisk University Center for Photonic Materials and Devices

NASA Astrophysics Data System (ADS)

Silberman, Enrique

1996-07-01

In 1992, NASA awarded Fisk University a 5 year grant to establish a center for research and education on photonic materials are synthesized, characterized and, in some cases, developed into devices with applications in the fields of radiation detectors and nonlinear optical crystals, glasses and nanomaterials. The educational components include participation in the research by 3 types of students majoring in Physics, Chemistry and Biology: 1) Fisk undergraduates participating during the academic year. 2) Fisk graduates performing their Maser Thesis research. 3) Fisk and other HBCU's and Minority Institutions' undergraduates attending a 10 week summer workshop with a very rigorous program of study, research and progress reporting. Funds are available for supporting participating students. Prerequisite, schedules of activities, evaluation procedures and typical examples of the outcome are presented.

A technique for designing active control systems for astronomical telescope mirrors

NASA Technical Reports Server (NTRS)

Howell, W. E.; Creedon, J. F.

1973-01-01

The problem of designing a control system to achieve and maintain the required surface accuracy of the primary mirror of a large space telescope was considered. Control over the mirror surface is obtained through the application of a corrective force distribution by actuators located on the rear surface of the mirror. The design procedure is an extension of a modal control technique developed for distributed parameter plants with known eigenfunctions to include plants whose eigenfunctions must be approximated by numerical techniques. Instructions are given for constructing the mathematical model of the system, and a design procedure is developed for use with typical numerical data in selecting the number and location of the actuators. Examples of actuator patterns and their effect on various errors are given.

Manufacturing PDMS micro lens array using spin coating under a multiphase system

NASA Astrophysics Data System (ADS)

Sun, Rongrong; Yang, Hanry; Rock, D. Mitchell; Danaei, Roozbeh; Panat, Rahul; Kessler, Michael R.; Li, Lei

2017-05-01

The development of micro lens arrays has garnered much interest due to increased demand of miniaturized systems. Traditional methods for manufacturing micro lens arrays have several shortcomings. For example, they require expensive facilities and long lead time, and traditional lens materials (i.e. glass) are typically heavy, costly and difficult to manufacture. In this paper, we explore a method for manufacturing a polydimethylsiloxane (PDMS) micro lens array using a simple spin coating technique. The micro lens array, formed under an interfacial tension dominated system, and the influence of material properties and process parameters on the fabricated lens shape are examined. The lenses fabricated using this method show comparable optical properties—including surface finish and image quality—with a reduced cost and manufacturing lead time.

OR14-V-Uncertainty-PD2La Uncertainty Quantification for Nuclear Safeguards and Nondestructive Assay Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nicholson, Andrew D.; Croft, Stephen; McElroy, Robert Dennis

2017-08-01

The various methods of nondestructive assay (NDA) of special nuclear material (SNM) have applications in nuclear nonproliferation, including detection and identification of illicit SNM at border crossings and quantifying SNM at nuclear facilities for safeguards. No assay method is complete without “error bars,” which provide one way of expressing confidence in the assay result. Consequently, NDA specialists typically provide error bars and also partition total uncertainty into “random” and “systematic” components so that, for example, an error bar can be developed for the total mass estimate in multiple items. Uncertainty Quantification (UQ) for NDA has always been important, but itmore » is recognized that greater rigor is needed and achievable using modern statistical methods.« less

Dataflow Design Tool: User's Manual

NASA Technical Reports Server (NTRS)

Jones, Robert L., III

1996-01-01

The Dataflow Design Tool is a software tool for selecting a multiprocessor scheduling solution for a class of computational problems. The problems of interest are those that can be described with a dataflow graph and are intended to be executed repetitively on a set of identical processors. Typical applications include signal processing and control law problems. The software tool implements graph-search algorithms and analysis techniques based on the dataflow paradigm. Dataflow analyses provided by the software are introduced and shown to effectively determine performance bounds, scheduling constraints, and resource requirements. The software tool provides performance optimization through the inclusion of artificial precedence constraints among the schedulable tasks. The user interface and tool capabilities are described. Examples are provided to demonstrate the analysis, scheduling, and optimization functions facilitated by the tool.

Observational Constraints on Ephemeral Wind Gusts that MobilizeSoil Dust Aerosols

NASA Astrophysics Data System (ADS)

Miller, R. L.; Leung, M. F.

2017-12-01

Dust aerosol models resolve the planetary scale winds that disperse particles throughout the globe, but the winds raising dust are often organized on smaller scales that are below the resolution of the model. These winds, including ephemeral wind gusts associated with boundary layer mixing, are typically parameterized. For example, gusts by dry convective eddies are related to the sensible heat flux. What remains is to constrain the magnitude of the wind gusts using boundary layer measurements, so that dust emission has the correct sensitivity to these gusts, relative to the resolved wind. Here, we use a year of ARM measurements with high temporal resolution from Niamey, Niger in the Sahel to evaluate our parameterization. This evaluation is important for dust aerosol models that use 'nudging' to reproduce observed transport patterns.

Microgravity science experiment integration - When the PI and the PED differ

NASA Technical Reports Server (NTRS)

Baer-Peckham, M. S.; Mccarley, K. S.

1991-01-01

This paper addresses issues related to the integration of principal investigators (PIs) and payload-element developers (PEDs) for conducting effective microgravity experiments. The Crystal Growth Furnace (CGF) is used as an example to demonstrate the key issues related to the integration of a PI's sample into a facility run by a different organization. Attention is given to the typical preflight timeline, documentation required for experimental implementation, and hardware deliverables. A flow chart delineates the payload-integration process flow, and PI inputs required for an experiment include equipment and procedure definitions, detailed design and fabrication of the experiment-specific equipment, and specifications of the contract-end item. The present analysis is of interest to the coordination of effective microgravity experiments on the Space Station Freedom that incorporate PIs and PEDs from different organizations.

Software reuse in spacecraft planning and scheduling systems

NASA Technical Reports Server (NTRS)

Mclean, David; Tuchman, Alan; Broseghini, Todd; Yen, Wen; Page, Brenda; Johnson, Jay; Bogovich, Lynn; Burkhardt, Chris; Mcintyre, James; Klein, Scott

1993-01-01

The use of a software toolkit and development methodology that supports software reuse is described. The toolkit includes source-code-level library modules and stand-alone tools which support such tasks as data reformatting and report generation, simple relational database applications, user interfaces, tactical planning, strategic planning and documentation. The current toolkit is written in C and supports applications that run on IBM-PC's under DOS and UNlX-based workstations under OpenLook and Motif. The toolkit is fully integrated for building scheduling systems that reuse AI knowledge base technology. A typical scheduling scenario and three examples of applications that utilize the reuse toolkit will be briefly described. In addition to the tools themselves, a description of the software evolution and reuse methodology that was used is presented.

Risk-Taking: Individual and Family Interests.

PubMed

Iltis, Ana S

2015-08-01

Decisions regarding clinical procedures or research participation typically require the informed consent of individuals. When individuals are unable to give consent, the informed permission of a legally authorized representative or surrogate is required. Although many proposed procedures are aimed primarily at benefiting the individual, some are not. I argue that, particularly when individuals are asked to assume risks primarily or exclusively for the benefit of others, family members ought to be engaged in the informed consent process. Examples of procedures in which individuals are asked to assume risks primarily or exclusively for the benefit of others include living organ donation and research participation. © The Author 2015. Published by Oxford University Press, on behalf of the Journal of Medicine and Philosophy Inc. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Transonic CFD applications at Boeing

NASA Technical Reports Server (NTRS)

Tinoco, E. N.

1989-01-01

The use of computational methods for three dimensional transonic flow design and analysis at the Boeing Company is presented. A range of computational tools consisting of production tools for every day use by project engineers, expert user tools for special applications by computational researchers, and an emerging tool which may see considerable use in the near future are described. These methods include full potential and Euler solvers, some coupled to three dimensional boundary layer analysis methods, for transonic flow analysis about nacelle, wing-body, wing-body-strut-nacelle, and complete aircraft configurations. As the examples presented show, such a toolbox of codes is necessary for the variety of applications typical of an industrial environment. Such a toolbox of codes makes possible aerodynamic advances not previously achievable in a timely manner, if at all.

Nonlinear Dot Plots.

PubMed

Rodrigues, Nils; Weiskopf, Daniel

2018-01-01

Conventional dot plots use a constant dot size and are typically applied to show the frequency distribution of small data sets. Unfortunately, they are not designed for a high dynamic range of frequencies. We address this problem by introducing nonlinear dot plots. Adopting the idea of nonlinear scaling from logarithmic bar charts, our plots allow for dots of varying size so that columns with a large number of samples are reduced in height. For the construction of these diagrams, we introduce an efficient two-way sweep algorithm that leads to a dense and symmetrical layout. We compensate aliasing artifacts at high dot densities by a specifically designed low-pass filtering method. Examples of nonlinear dot plots are compared to conventional dot plots as well as linear and logarithmic histograms. Finally, we include feedback from an expert review.

Lunar surface structural concepts and construction studies

NASA Technical Reports Server (NTRS)

Mikulas, Martin

1991-01-01

The topics are presented in viewgraph form and include the following: lunar surface structures construction research areas; lunar crane related disciplines; shortcomings of typical mobile crane in lunar base applications; candidate crane cable suspension systems; NIST six-cable suspension crane; numerical example of natural frequency; the incorporation of two new features for improved performance of the counter-balanced actively-controlled lunar crane; lunar crane pendulum mechanics; simulation results; 1/6 scale lunar crane testbed using GE robot for global manipulation; basic deployable truss approaches; bi-pantograph elevator platform; comparison of elevator platforms; perspective of bi-pantograph beam; bi-pantograph synchronously deployable tower/beam; lunar module off-loading concept; module off-loader concept packaged; starburst deployable precision reflector; 3-ring reflector deployment scheme; cross-section of packaged starburst reflector; and focal point and thickness packaging considerations.

Methodology for stereoscopic motion-picture quality assessment

NASA Astrophysics Data System (ADS)

Voronov, Alexander; Vatolin, Dmitriy; Sumin, Denis; Napadovsky, Vyacheslav; Borisov, Alexey

2013-03-01

Creating and processing stereoscopic video imposes additional quality requirements related to view synchronization. In this work we propose a set of algorithms for detecting typical stereoscopic-video problems, which appear owing to imprecise setup of capture equipment or incorrect postprocessing. We developed a methodology for analyzing the quality of S3D motion pictures and for revealing their most problematic scenes. We then processed 10 modern stereo films, including Avatar, Resident Evil: Afterlife and Hugo, and analyzed changes in S3D-film quality over the years. This work presents real examples of common artifacts (color and sharpness mismatch, vertical disparity and excessive horizontal disparity) in the motion pictures we processed, as well as possible solutions for each problem. Our results enable improved quality assessment during the filming and postproduction stages.

Learning patterns of life from intelligence analyst chat

NASA Astrophysics Data System (ADS)

Schneider, Michael K.; Alford, Mark; Babko-Malaya, Olga; Blasch, Erik; Chen, Lingji; Crespi, Valentino; HandUber, Jason; Haney, Phil; Nagy, Jim; Richman, Mike; Von Pless, Gregory; Zhu, Howie; Rhodes, Bradley J.

2016-05-01

Our Multi-INT Data Association Tool (MIDAT) learns patterns of life (POL) of a geographical area from video analyst observations called out in textual reporting. Typical approaches to learning POLs from video make use of computer vision algorithms to extract locations in space and time of various activities. Such approaches are subject to the detection and tracking performance of the video processing algorithms. Numerous examples of human analysts monitoring live video streams annotating or "calling out" relevant entities and activities exist, such as security analysis, crime-scene forensics, news reports, and sports commentary. This user description typically corresponds with textual capture, such as chat. Although the purpose of these text products is primarily to describe events as they happen, organizations typically archive the reports for extended periods. This archive provides a basis to build POLs. Such POLs are useful for diagnosis to assess activities in an area based on historical context, and for consumers of products, who gain an understanding of historical patterns. MIDAT combines natural language processing, multi-hypothesis tracking, and Multi-INT Activity Pattern Learning and Exploitation (MAPLE) technologies in an end-to-end lab prototype that processes textual products produced by video analysts, infers POLs, and highlights anomalies relative to those POLs with links to "tracks" of related activities performed by the same entity. MIDAT technologies perform well, achieving, for example, a 90% F1-value on extracting activities from the textual reports.

Roles of chemical metrology in electronics industry and associated environment in Korea: a tutorial.

PubMed

Kang, Namgoo; Joong Kim, Kyung; Seog Kim, Jin; Hae Lee, Joung

2015-03-01

Chemical metrology is gaining importance in electronics industry that manufactures semiconductors, electronic displays, and microelectronics. Extensive and growing needs from this industry have raised the significance of accurate measurements of the amount of substances and material properties. For the first time, this paper presents information on how chemical metrology is being applied to meet a variety of needs in the aspects of quality control of electronics products and environmental regulations closely associated with electronics industry. For a better understanding of the roles of the chemical metrology within electronics industry, the recent research activities and results in chemical metrology are presented using typical examples in Korea where electronic industry is leading a national economy. Particular attention is paid to the applications of chemical metrology for advancing emerging electronics technology developments. Such examples are a novel technique for the accurate quantification of gas composition at nano-liter levels within a MEMS package, the surface chemical analysis of a semiconductor device. Typical metrological tools are also presented for the development of certified reference materials for fluorinated greenhouse gases and proficiency testing schemes for heavy metals and chlorinated toxic gas in order to cope properly with environmental issues within electronics industry. In addition, a recent technique is presented for the accurate measurement of the destruction and removal efficiency of a typical greenhouse gas scrubber. Copyright © 2014 Elsevier B.V. All rights reserved.

Scientist Participation in Education and Public Outreach - Using Web Tools to Communicate the Scientific Process and Engage an Audience in Understanding Planetary Science: Examples with Lunar Reconnaissance Orbiter (LRO) Data (Invited)

NASA Astrophysics Data System (ADS)

Petro, N. E.

2013-12-01

Scientists often speak to the public about their science and the current state of understanding of their field. While many talks (including those by this author) typically feature static plots, figures, diagrams, and the odd movie/animation/visualization (when technology allows), it is now possible, using the web to guide an audience through the thought process of how a scientist tackles certain questions. The presentation will highlight examples of web tools that effectively illustrate how datasets are used to address questions of lunar science. Why would a scientist use precious time during a talk to interact with data, in real time? Why not just show the results and move on? Through experience it is evident that illustrating how data is analyzed, even in a simple form, engages an audience, and demonstrates the thought process when interacting with data. While it is clear that scientists are unlikely to use such a tool to conduct science, it illustrates how a member of the public can engage with mission data. An example is discussed below. When discussing the geology of the Moon, there is an enormous volume of data that can be used to explain what we know (or think we know) and how we know it. For example, the QuickMap interface (http://www.actgate.com/home/quickmap.htm) enables interaction with a set of data (images, spectral data, topography, radar data) across the entire Moon (http://target.lroc.asu.edu/q3/). This webtool enables a speaker the opportunity (given adequate web connectivity) to talk about features, such as a crater, and show it from multiple perspectives (e.g., plan view, oblique, topographically exaggerated) in a logical flow. The tool enables illustration of topographic profiles, 3-D perspectives, and data overlays. Now, one might ask why doing this demonstration in real time is valuable, over a set of static slides. In some cases static slides are best, and doing any real time demos is unfeasible. However, guiding an engaged audience through the thought process, in real time, also offers the audience the opportunity to interact with both the scientist and the data. When a presenter offers the audience the chance to identify a target to explore, the presentation becomes a two-way dialog and guided discussion, over a lecture with little interaction. The demonstration also allows for questions of what additional data is needed or desired to address a given question. All told, this is a method for illustrating how a scientist (primarily interested in remote sensing) can use an available tool to walk through how a focused science question can be addressed, or how typical analysis are conducted. For example, one can show how, for a small set of craters, the depth-diameter ratio varies as a function of degradation. This leads to the question of why, and hopefully a discussion of the erosion process on the Moon. Additional examples will be discussed and illustrated. Example of Quickmap interface illustrating perspective view of Tycho Crater.

Germline genetic variants with implications for disease risk and therapeutic outcomes.

PubMed

Pasternak, Amy L; Ward, Kristen M; Luzum, Jasmine A; Ellingrod, Vicki L; Hertz, Daniel L

2017-10-01

Genetic testing has multiple clinical applications including disease risk assessment, diagnosis, and pharmacogenomics. Pharmacogenomics can be utilized to predict whether a pharmacologic therapy will be effective or to identify patients at risk for treatment-related toxicity. Although genetic tests are typically ordered for a distinct clinical purpose, the genetic variants that are found may have additional implications for either disease or pharmacology. This review will address multiple examples of germline genetic variants that are informative for both disease and pharmacogenomics. The discussed relationships are diverse. Some of the agents are targeted for the disease-causing genetic variant, while others, although not targeted therapies, have implications for the disease they are used to treat. It is also possible that the disease implications of a genetic variant are unrelated to the pharmacogenomic implications. Some of these examples are considered clinically actionable pharmacogenes, with evidence-based, pharmacologic treatment recommendations, while others are still investigative as areas for additional research. It is important that clinicians are aware of both the disease and pharmacogenomic associations of these germline genetic variants to ensure patients are receiving comprehensive personalized care. Copyright © 2017 the American Physiological Society.

Improved Speech Coding Based on Open-Loop Parameter Estimation

NASA Technical Reports Server (NTRS)

Juang, Jer-Nan; Chen, Ya-Chin; Longman, Richard W.

2000-01-01

A nonlinear optimization algorithm for linear predictive speech coding was developed early that not only optimizes the linear model coefficients for the open loop predictor, but does the optimization including the effects of quantization of the transmitted residual. It also simultaneously optimizes the quantization levels used for each speech segment. In this paper, we present an improved method for initialization of this nonlinear algorithm, and demonstrate substantial improvements in performance. In addition, the new procedure produces monotonically improving speech quality with increasing numbers of bits used in the transmitted error residual. Examples of speech encoding and decoding are given for 8 speech segments and signal to noise levels as high as 47 dB are produced. As in typical linear predictive coding, the optimization is done on the open loop speech analysis model. Here we demonstrate that minimizing the error of the closed loop speech reconstruction, instead of the simpler open loop optimization, is likely to produce negligible improvement in speech quality. The examples suggest that the algorithm here is close to giving the best performance obtainable from a linear model, for the chosen order with the chosen number of bits for the codebook.

Accessing the public MIMIC-II intensive care relational database for clinical research.

PubMed

Scott, Daniel J; Lee, Joon; Silva, Ikaro; Park, Shinhyuk; Moody, George B; Celi, Leo A; Mark, Roger G

2013-01-10

The Multiparameter Intelligent Monitoring in Intensive Care II (MIMIC-II) database is a free, public resource for intensive care research. The database was officially released in 2006, and has attracted a growing number of researchers in academia and industry. We present the two major software tools that facilitate accessing the relational database: the web-based QueryBuilder and a downloadable virtual machine (VM) image. QueryBuilder and the MIMIC-II VM have been developed successfully and are freely available to MIMIC-II users. Simple example SQL queries and the resulting data are presented. Clinical studies pertaining to acute kidney injury and prediction of fluid requirements in the intensive care unit are shown as typical examples of research performed with MIMIC-II. In addition, MIMIC-II has also provided data for annual PhysioNet/Computing in Cardiology Challenges, including the 2012 Challenge "Predicting mortality of ICU Patients". QueryBuilder is a web-based tool that provides easy access to MIMIC-II. For more computationally intensive queries, one can locally install a complete copy of MIMIC-II in a VM. Both publicly available tools provide the MIMIC-II research community with convenient querying interfaces and complement the value of the MIMIC-II relational database.

Can we scan the supernova model space for collective oscillations?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pehlivan, Y., E-mail: yamac.pehlivan@msgsu.edu.tr; National Astronomical Observatory of Japan 2-21-1 Osawa, Mitaka, Tokyo, 181-8588; Subaşı, A. L.

Collective neutrino oscillations in a core collapse supernova is a many-body phenomenon which can transform the neutrino energy spectra through emergent effects. One example of this behavior is the neutrino spectral swaps in which neutrinos of different flavors partially or completely exchange their spectra. In this talk, we address the question of how model dependent this behavior is. In particular, we demonstrate that these swaps may be independent of the mean field approximation that is typically employed in numerical treatments by showing an example of a spectral swap in the exact many-body picture.

Space commercialization: Analysis of R and D investments with long time horizons

NASA Technical Reports Server (NTRS)

Sheahen, T. P.

1984-01-01

By following a single hypothetical example through a series of variations, the way different potential investors might look at the opportunity to participate in space commercialization is described. The example itself is fairly typical of commercial opportunities in space. The chief characteristics are a steadily increasing requirement for capital infusion over an 8 year period, followed by a very generous stream of profits running another decade or more beyond. There is a decision point at 3 years, at the conclusion of laboratory R&D; and another at 6 years, following 2 initial space flights.

NASA-JPL overview, space technology and relevance to medicine (Conference Presentation)

NASA Astrophysics Data System (ADS)

van Zyl, Jakob

2017-05-01

There is special synergy between NASA space instruments and medical devices, especially those that may be implanted in the human body. For example, in both cases instruments have to be small, typically have to consume little power and often have to operate in harsh environments. JPL has a long history in using this synergy to leverage from the technology developed for space missions for application in medical fields. In this talk, we discuss the general overlap of technological requirements in the medical field and space science. We will highlight some examples where JPL instrumentation and engineering has been transferred successfully.

Ultrasonic Microtransport

NASA Astrophysics Data System (ADS)

Moroney, Richard Morgan, III

We have observed numerous kinetic effects using ultrasonic flexural plate waves (FPWs) in 4mu -thick composite plates of low-stress silicon nitride, piezoelectric zinc oxide and aluminum. The wavelength is typically 100 mum, and the area 3 x 8 mm^2. A successful new surface micromachining fabrication process is presented here for the first time. FPWs have been used to move liquids and gasses with motion typically indicated by polysilicon blocks in air and polystyrene spheres in water; the velocity in air is 4.5 mm/s (with a zero-to-peak input of 3 V), and in water it is 100 mum/s (with an input of 7.8 V). Other observations include pumping of a liquid dye, and mixing near the FPW surface. All quantitative observations demonstrate that the kinetic effects of FPWs are proportional to the square of the wave amplitude. The amplitude for a typical device is 250 A at 9 V input; the power in a typical FPW is about 2 mW. The amplitude can be accurately measured using a laser diffraction technique. Experimental error is about +/-10%, and many of the results agree well with a simple theory to predict the FPW amplitude; extensions of the theory model the fluid loading of FPW devices, but experiment and theory disagree by about 15%. Pumping by flexural plate waves is an example of the phenomenon known as acoustic streaming. A common solution approach is the method of successive approximations, where the nonlinear equations are first linearized and solved. This "first-order" solution is then used to determine the inhomogeneous source terms in the linearized, "second -order" equations of motion. Theoretical predictions of streaming theory are in excellent agreement with experiment in the case where the FPW device contacts a half-space of fluid; predictions for flow in small channels encourage the development of integrated micropumps. Applications for microflow include thermal redistribution in integrated circuits and liquid movement in analytical instruments--particularly where a small dead volume is required. Capabilities of this technology and further applications are discussed. Microflow systems that integrate transport of fluids and solids with sensing, mixing and other useful tasks may become a new market-leading application for the sensor and actuator field.

Mobile robotics application in the nuclear industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, S.L.; White, J.R.

1995-03-01

Mobile robots have been developed to perform hazardous operations in place of human workers. Applications include nuclear plant inspection/maintenance, decontamination and decommissioning police/military explosive ordinance disposal (EOD), hostage/terrorist negotiations and fire fighting. Nuclear facilities have proven that robotic applications can be cost-effective solutions to reducing personnel exposure and plant downtime. The first applications of mobile robots in the nuclear industry began in the early 1980`s, with the first vehicles being one of a kind machines or adaptations of commercial EOD robots. These activities included efforts by numerous commercial companies, the U.S. Nuclear Regulatory Commission, EPRI, and several national laboratories. Somemore » of these efforts were driven by the recovery and cleanup activities at TMI which demonstrated the potential and need for a remote means of performing surveillance and maintenance tasks in nuclear plants. The use of these machines is now becoming commonplace in nuclear facilities throughout the world. The hardware maturity and the confidence of the users has progressed to the point where the applications of mobile robots is not longer considered a novelty. These machines are being used in applications where the result is to help achieve more aggressive goals for personnel radiation exposure and plant availability, perform tasks more efficiently, and allow plant operators to retrieve information from areas previously considered inaccessible. Typical examples include surveillance in high radiation areas (during operation and outage activities), radiation surveys, waste handling, and decontamination evolutions. This paper will discuss this evolution including specific applications experiences, examples of currently available technology, and the benefits derived from the use of mobile robotic vehicles in commercial nuclear power facilities.« less

Hydraulic and geochemical framework of the Idaho National Engineering and Environmental Laboratory vadose zone

USGS Publications Warehouse

Nimmo, John R.; Rousseau, Joseph P.; Perkins, Kim S.; Stollenwerk, Kenneth G.; Glynn, Pierre D.; Bartholomay, Roy C.; Knobel, LeRoy L.

2004-01-01

Questions of major importance for subsurface contaminant transport at the Idaho National Engineering and Environmental Laboratory (INEEL) include (i) travel times to the aquifer, both average or typical values and the range of values to be expected, and (ii) modes of contaminant transport, especially sorption processes. The hydraulic and geochemical framework within which these questions are addressed is dominated by extreme heterogeneity in a vadose zone and aquifer consisting of interbedded basalts and sediments. Hydraulically, major issues include diverse possible types of flow pathways, extreme anisotropy, preferential flow, combined vertical and horizontal flow, and temporary saturation or perching. Geochemically, major issues include contaminant mobility as influenced by redox conditions, the concentration of organic and inorganic complexing solutes and other local variables, the interaction with infiltrating waters and with the contaminant source environment, and the aqueous speciation of contaminants such as actinides. Another major issue is the possibility of colloid transport, which inverts some of the traditional concepts of mobility, as sorbed contaminants on mobile colloids may be transported with ease compared with contaminants that are not sorbed. With respect to the goal of minimizing aquifer concentrations of contaminants, some characteristics of the vadose zone are essentially completely favorable. Examples include the great thickness (200 m) of the vadose zone, and the presence of substantial quantities of fine sediments that can retard contaminant transport both hydraulically and chemically. Most characteristics, however, have both favorable and unfavorable aspects. For example, preferential flow, as promoted by several notable features of the vadose zone at the INEEL, can provide fast, minimally sorbing pathways for contaminants to reach the aquifer easily, but it also leads to a wide dispersal of contaminants in a large volume of subsurface material, thus increasing the opportunity for dilution and sorption.

Solid-state energy storage module employing integrated interconnect board

DOEpatents

Rouillard, Jean; Comte, Christophe; Daigle, Dominik; Hagen, Ronald A.; Knudson, Orlin B.; Morin, Andre; Ranger, Michel; Ross, Guy; Rouillard, Roger; St-Germain, Philippe; Sudano, Anthony; Turgeon, Thomas A.

2000-01-01

The present invention is directed to an improved electrochemical energy storage device. The electrochemical energy storage device includes a number of solid-state, thin-film electrochemical cells which are selectively interconnected in series or parallel through use of an integrated interconnect board. The interconnect board is typically disposed within a sealed housing which also houses the electrochemical cells, and includes a first contact and a second contact respectively coupled to first and second power terminals of the energy storage device. The interconnect board advantageously provides for selective series or parallel connectivity with the electrochemical cells, irrespective of electrochemical cell position within the housing. In one embodiment, a sheet of conductive material is processed by employing a known milling, stamping, or chemical etching technique to include a connection pattern which provides for flexible and selective interconnecting of individual electrochemical cells within the housing, which may be a hermetically sealed housing. Fuses and various electrical and electro-mechanical devices, such as bypass, equalization, and communication devices for example, may also be mounted to the interconnect board and selectively connected to the electrochemical cells.

Thermally-Induced Structural Disturbances of Rigid Panel Solar Arrays

NASA Technical Reports Server (NTRS)

Johnston, John D.; Thornton, Earl A.

1997-01-01

The performance of a significant number of spacecraft has been impacted negatively by attitude disturbances resulting from thermally-induced motions of flexible structures. Recent examples of spacecraft affected by these disturbances include the Hubble Space Telescope (HST) and the Upper Atmosphere Research Satellite (UARS). Thermally-induced structural disturbances occur as the result of rapid changes in thermal loading typically initiated as a satellite exits or enters the Earth's shadow. Temperature differences in flexible appendages give rise to structural deformations, which in turn result in disturbance torques reacting back on the spacecraft. Structures which have proven susceptible to these disturbances include deployable booms and solar arrays. This paper investigates disturbances resulting from thermally-induced deformations of rigid panel solar arrays. An analytical model for the thermal-structural response of the solar array and the corresponding disturbance torque are presented. The effect of these disturbances on the attitude dynamics of a simple spacecraft is then investigated using a coupled system of governing equations which includes the effects of thermally-induced deformations. Numerical results demonstrate the effect of varying solar array geometry on the dynamic response of the system.

Example-based learning: effects of model expertise in relation to student expertise.

PubMed

Boekhout, Paul; van Gog, Tamara; van de Wiel, Margje W J; Gerards-Last, Dorien; Geraets, Jacques

2010-12-01

Worked examples are very effective for novice learners. They typically present a written-out ideal (didactical) solution for learners to study. This study used worked examples of patient history taking in physiotherapy that presented a non-didactical solution (i.e., based on actual performance). The effects of model expertise (i.e., worked example based on advanced, third-year student model or expert physiotherapist model) in relation to students' expertise (i.e., first- or second-year) were investigated. One hundred and thirty-four physiotherapy students (61 first-year and 73 second-year). Design was 2 × 2 factorial with factors 'Student Expertise' (first-year vs. second-year) and 'Model Expertise' (expert vs. advanced student). Within expertise levels, students were randomly assigned to the Expert Example or the Advanced Student Example condition. All students studied two examples (content depending on their assigned condition) and then completed a retention and test task. They rated their invested mental effort after each example and test task. Second-year students invested less mental effort in studying the examples, and in performing the retention and transfer tasks than first-year students. They also performed better on the retention test, but not on the transfer test. In contrast to our hypothesis, there was no interaction between student expertise and model expertise: all students who had studied the Expert examples performed better on the transfer test than students who had studied Advanced Student Examples. This study suggests that when worked examples are based on actual performance, rather than an ideal procedure, expert models are to be preferred over advanced student models.

Postnatal phenobarbital for the prevention of intraventricular haemorrhage in preterm infants.

PubMed

Smit, Elisa; Odd, David; Whitelaw, Andrew

2013-08-13

Intraventricular haemorrhage (IVH) is a major complication of preterm birth. Large haemorrhages are associated with a high risk of disability and hydrocephalus. Instability of blood pressure and cerebral blood flow are postulated as causative factors. Another mechanism may involve reperfusion damage from oxygen free radicals. Phenobarbital has been suggested as a safe treatment that stabilises blood pressure and may protect against free radicals. To determine the effect of postnatal administration of phenobarbital on the risk of IVH, neurodevelopmental impairment or death in preterm infants. We used the search strategy of the Neonatal Collaborative Review Group. The original review author (A Whitelaw) was an active trialist in this area and had personal contact with many groups in this field. He handsearched journals from 1976 (when cranial computed tomography (CT) scanning started) to October 2000; these included: Pediatrics, Journal of Pediatrics, Archives of Disease in Childhood, Pediatric Research, Developmental Medicine and Child Neurology, Acta Paediatrica, European Journal of Pediatrics, Neuropediatrics, New England Journal of Medicine, Lancet and British Medical Journal. We searched the National Library of Medicine (USA) database (via PubMed) and the Cochrane Central Register of Controlled Trials (CENTRAL, 2012, Issue 10) through to 31 October 2012. We did not limit the searches to the English language, as long as the article included an English abstract. We read identified articles in the original language or translated. We included randomised or quasi-randomised controlled trials in which phenobarbital was given to preterm infants identified as being at risk of IVH because of gestational age below 34 weeks, birthweight below 1500 g or respiratory failure. Adequate determination of IVH by ultrasound or CT was also required. In addition to details of patient selection and control of bias, we extracted the details of the administration of phenobarbital. We searched for the following endpoints: IVH (with grading), posthaemorrhagic ventricular dilation or hydrocephalus, neurodevelopmental impairment and death. In addition, we searched for possible adverse effects of phenobarbitone, for example hypotension, mechanical ventilation, pneumothorax, hypercapnia and acidosis. We included 12 controlled trials that recruited 982 infants. There was heterogeneity between trials for the outcome IVH, with three trials finding a significant decrease in IVH and one trial finding an increase in IVH in the group receiving phenobarbital. Meta-analysis showed no difference between the phenobarbital-treated group and the control group in either all IVH (typical risk ratio (RR) 0.91; 95% CI 0.77 to 1.08), severe IVH (typical RR 0.77; 95% CI 0.58 to 1.04), posthaemorrhagic ventricular dilation (typical RR 0.89; 95% CI 0.38 to 2.08), severe neurodevelopmental impairment (typical RR 1.44; 95% CI 0.41 to 5.04) or death before hospital discharge (typical RR 0.88; 95% CI 0.64 to 1.21). There was a consistent trend in the trials towards increased use of mechanical ventilation in the phenobarbital-treated group, which was supported by the meta-analysis (typical RR 1.18; 95% CI 1.06 to 1.32; typical risk difference 0.129; 95% CI 0.04 to 0.21), but there was no significant difference in pneumothorax, acidosis or hypercapnia. Postnatal administration of phenobarbital cannot be recommended as prophylaxis to prevent IVH in preterm infants and is associated with an increased need for mechanical ventilation.

Recommendations for teaching upon sensitive topics in forensic and legal medicine in the context of medical education pedagogy.

PubMed

Kennedy, Kieran M; Scriver, Stacey

2016-11-01

Undergraduate medical curricula typically include forensic and legal medicine topics that are of a highly sensitive nature. Examples include suicide, child abuse, domestic and sexual violence. It is likely that some students will have direct or indirect experience of these issues which are prevalent in society. Those students are vulnerable to vicarious harm from partaking in their medical education. Even students with no direct or indirect experience of these issues may be vulnerable to vicarious trauma, particularly students who are especially empathetic to cases presented. Despite these risks, instruction relating to these topics is necessary to ensure the competencies of graduating doctors to respond appropriately to cases they encounter during their professional careers. However, risk can be minimised by a well-designed and thoughtfully delivered educational programme. We provide recommendations for the successful inclusion of sensitive forensic and legal medicine topics in undergraduate medical curricula. Copyright © 2016 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Structural Image Analysis of the Brain in Neuropsychology Using Magnetic Resonance Imaging (MRI) Techniques.

PubMed

Bigler, Erin D

2015-09-01

Magnetic resonance imaging (MRI) of the brain provides exceptional image quality for visualization and neuroanatomical classification of brain structure. A variety of image analysis techniques provide both qualitative as well as quantitative methods to relate brain structure with neuropsychological outcome and are reviewed herein. Of particular importance are more automated methods that permit analysis of a broad spectrum of anatomical measures including volume, thickness and shape. The challenge for neuropsychology is which metric to use, for which disorder and the timing of when image analysis methods are applied to assess brain structure and pathology. A basic overview is provided as to the anatomical and pathoanatomical relations of different MRI sequences in assessing normal and abnormal findings. Some interpretive guidelines are offered including factors related to similarity and symmetry of typical brain development along with size-normalcy features of brain anatomy related to function. The review concludes with a detailed example of various quantitative techniques applied to analyzing brain structure for neuropsychological outcome studies in traumatic brain injury.

Developing a quality assurance program for online services.

PubMed Central

Humphries, A W; Naisawald, G V

1991-01-01

A quality assurance (QA) program provides not only a mechanism for establishing training and competency standards, but also a method for continuously monitoring current service practices to correct shortcomings. The typical QA cycle includes these basic steps: select subject for review, establish measurable standards, evaluate existing services using the standards, identify problems, implement solutions, and reevaluate services. The Claude Moore Health Sciences Library (CMHSL) developed a quality assurance program for online services designed to evaluate services against specific criteria identified by research studies as being important to customer satisfaction. These criteria include reliability, responsiveness, approachability, communication, and physical factors. The application of these criteria to the library's existing online services in the quality review process is discussed with specific examples of the problems identified in each service area, as well as the solutions implemented to correct deficiencies. The application of the QA cycle to an online services program serves as a model of possible interventions. The use of QA principles to enhance online service quality can be extended to other library service areas. PMID:1909197

Developing a quality assurance program for online services.

PubMed

Humphries, A W; Naisawald, G V

1991-07-01

A quality assurance (QA) program provides not only a mechanism for establishing training and competency standards, but also a method for continuously monitoring current service practices to correct shortcomings. The typical QA cycle includes these basic steps: select subject for review, establish measurable standards, evaluate existing services using the standards, identify problems, implement solutions, and reevaluate services. The Claude Moore Health Sciences Library (CMHSL) developed a quality assurance program for online services designed to evaluate services against specific criteria identified by research studies as being important to customer satisfaction. These criteria include reliability, responsiveness, approachability, communication, and physical factors. The application of these criteria to the library's existing online services in the quality review process is discussed with specific examples of the problems identified in each service area, as well as the solutions implemented to correct deficiencies. The application of the QA cycle to an online services program serves as a model of possible interventions. The use of QA principles to enhance online service quality can be extended to other library service areas.

Practical use of video imagery in nearshore oceanographic field studies

USGS Publications Warehouse

Holland, K.T.; Holman, R.A.; Lippmann, T.C.; Stanley, J.; Plant, N.

1997-01-01

An approach was developed for using video imagery to quantify, in terms of both spatial and temporal dimensions, a number of naturally occurring (nearshore) physical processes. The complete method is presented, including the derivation of the geometrical relationships relating image and ground coordinates, principles to be considered when working with video imagery and the two-step strategy for calibration of the camera model. The techniques are founded on the principles of photogrammetry, account for difficulties inherent in the use of video signals, and have been adapted to allow for flexibility of use in field studies. Examples from field experiments indicate that this approach is both accurate and applicable under the conditions typically experienced when sampling in coastal regions. Several applications of the camera model are discussed, including the measurement of nearshore fluid processes, sand bar length scales, foreshore topography, and drifter motions. Although we have applied this method to the measurement of nearshore processes and morphologic features, these same techniques are transferable to studies in other geophysical settings.

The Systems Biology Markup Language (SBML) Level 3 Package: Flux Balance Constraints.

PubMed

Olivier, Brett G; Bergmann, Frank T

2015-09-04

Constraint-based modeling is a well established modelling methodology used to analyze and study biological networks on both a medium and genome scale. Due to their large size, genome scale models are typically analysed using constraint-based optimization techniques. One widely used method is Flux Balance Analysis (FBA) which, for example, requires a modelling description to include: the definition of a stoichiometric matrix, an objective function and bounds on the values that fluxes can obtain at steady state. The Flux Balance Constraints (FBC) Package extends SBML Level 3 and provides a standardized format for the encoding, exchange and annotation of constraint-based models. It includes support for modelling concepts such as objective functions, flux bounds and model component annotation that facilitates reaction balancing. The FBC package establishes a base level for the unambiguous exchange of genome-scale, constraint-based models, that can be built upon by the community to meet future needs (e. g. by extending it to cover dynamic FBC models).

The Systems Biology Markup Language (SBML) Level 3 Package: Flux Balance Constraints.

PubMed

Olivier, Brett G; Bergmann, Frank T

2015-06-01

Constraint-based modeling is a well established modelling methodology used to analyze and study biological networks on both a medium and genome scale. Due to their large size, genome scale models are typically analysed using constraint-based optimization techniques. One widely used method is Flux Balance Analysis (FBA) which, for example, requires a modelling description to include: the definition of a stoichiometric matrix, an objective function and bounds on the values that fluxes can obtain at steady state. The Flux Balance Constraints (FBC) Package extends SBML Level 3 and provides a standardized format for the encoding, exchange and annotation of constraint-based models. It includes support for modelling concepts such as objective functions, flux bounds and model component annotation that facilitates reaction balancing. The FBC package establishes a base level for the unambiguous exchange of genome-scale, constraint-based models, that can be built upon by the community to meet future needs (e. g. by extending it to cover dynamic FBC models).

Coherent perfect absorbers: linear control of light with light

NASA Astrophysics Data System (ADS)

Baranov, Denis G.; Krasnok, Alex; Shegai, Timur; Alù, Andrea; Chong, Yidong

2017-12-01

The absorption of electromagnetic energy by a material is a phenomenon that underlies many applications, including molecular sensing, photocurrent generation and photodetection. Typically, the incident energy is delivered to the system through a single channel, for example, by a plane wave incident on one side of an absorber. However, absorption can be made much more efficient by exploiting wave interference. A coherent perfect absorber is a system in which the complete absorption of electromagnetic radiation is achieved by controlling the interference of multiple incident waves. Here, we review recent advances in the design and applications of such devices. We present the theoretical principles underlying the phenomenon of coherent perfect absorption and give an overview of the photonic structures in which it can be realized, including planar and guided-mode structures, graphene-based systems, parity-symmetric and time-symmetric structures, 3D structures and quantum-mechanical systems. We then discuss possible applications of coherent perfect absorption in nanophotonics, and, finally, we survey the perspectives for the future of this field.

Array magnetics modal analysis for the DIII-D tokamak based on localized time-series modelling

DOE PAGES

Olofsson, K. Erik J.; Hanson, Jeremy M.; Shiraki, Daisuke; ...

2014-07-14

Here, time-series analysis of magnetics data in tokamaks is typically done using block-based fast Fourier transform methods. This work presents the development and deployment of a new set of algorithms for magnetic probe array analysis. The method is based on an estimation technique known as stochastic subspace identification (SSI). Compared with the standard coherence approach or the direct singular value decomposition approach, the new technique exhibits several beneficial properties. For example, the SSI method does not require that frequencies are orthogonal with respect to the timeframe used in the analysis. Frequencies are obtained directly as parameters of localized time-series models.more » The parameters are extracted by solving small-scale eigenvalue problems. Applications include maximum-likelihood regularized eigenmode pattern estimation, detection of neoclassical tearing modes, including locked mode precursors, and automatic clustering of modes, and magnetics-pattern characterization of sawtooth pre- and postcursors, edge harmonic oscillations and fishbones.« less

Detection of non-coding RNA in bacteria and archaea using the DETR'PROK Galaxy pipeline.

PubMed

Toffano-Nioche, Claire; Luo, Yufei; Kuchly, Claire; Wallon, Claire; Steinbach, Delphine; Zytnicki, Matthias; Jacq, Annick; Gautheret, Daniel

2013-09-01

RNA-seq experiments are now routinely used for the large scale sequencing of transcripts. In bacteria or archaea, such deep sequencing experiments typically produce 10-50 million fragments that cover most of the genome, including intergenic regions. In this context, the precise delineation of the non-coding elements is challenging. Non-coding elements include untranslated regions (UTRs) of mRNAs, independent small RNA genes (sRNAs) and transcripts produced from the antisense strand of genes (asRNA). Here we present a computational pipeline (DETR'PROK: detection of ncRNAs in prokaryotes) based on the Galaxy framework that takes as input a mapping of deep sequencing reads and performs successive steps of clustering, comparison with existing annotation and identification of transcribed non-coding fragments classified into putative 5' UTRs, sRNAs and asRNAs. We provide a step-by-step description of the protocol using real-life example data sets from Vibrio splendidus and Escherichia coli. Copyright © 2013 The Authors. Published by Elsevier Inc. All rights reserved.

Tethered Satellites as an Enabling Platform for Operational Space Weather Monitoring Systems

NASA Technical Reports Server (NTRS)

Gilchrist, Brian E.; Krause, Linda Habash; Gallagher, Dennis Lee; Bilen, Sven Gunnar; Fuhrhop, Keith; Hoegy, Walt R.; Inderesan, Rohini; Johnson, Charles; Owens, Jerry Keith; Powers, Joseph;

Castor phospholipid:diacylglycerol acyltransferase facilitates efficient metabolism of hydroxy fatty acids in transgenic Arabidopsis

USDA-ARS?s Scientific Manuscript database

Producing unusual fatty acids (FAs) in crop plants has been a long-standing goal of green chemistry. However, expression of the enzymes that catalyze the primary synthesis of these unusual FAs in transgenic plants typically results in low levels of the desired FA. For example, seed-specific expressi...

Morning NO2 Exposure Sensitizes Hypertensive Rats to the Cardiovascular Effects of O3 Exposure in the Afternoon

EPA Science Inventory

Although ambient air sheds vary in composition, specific pollutants typically peak at predictable times throughout the course of a day. For example, in urban environments, peak nitrogen dioxide (NO2) and particulate matter levels coincide with rush hour traffic in the morning and...

Belief-Desire Reasoning as a Process of Selection

ERIC Educational Resources Information Center

Leslie, Alan M.; German, Tim P.; Polizzi, Pamela

2005-01-01

Human learning may depend upon domain specialized mechanisms. A plausible example is rapid, early learning about the thoughts and feelings of other people. A major achievement in this domain, at about age four in the typically developing child, is the ability to solve problems in which the child attributes false beliefs to other people and…

Inclusive Education and Students without Special Educational Needs

ERIC Educational Resources Information Center

Ruijs, Nienke M.; Van der Veen, Ineke; Peetsma, Thea T. D.

2010-01-01

Background: In the debate on inclusive education, students without special educational needs (SEN) are an important topic. However, there is a lot unknown about differences between these typical students in inclusive and non-inclusive classes. For example, the neutral results that are often found in earlier research could be caused by positive…

Differentiating through Literature Circles

ERIC Educational Resources Information Center

Helgeson, John

2017-01-01

This article begins with an example of a typical middle-school experience with literature circles. Students read a common text and come prepared to share and discuss the text based on individual roles they are assigned. Teachers are using this practice to address the complexity levels of texts in order to help students develop the skills they need…

The Special Challenges for National Libraries

ERIC Educational Resources Information Center

Breeding, Marshall

2011-01-01

Managing a library collection at the national level follows quite a different set of assumptions than hold for typical academic or public libraries. These collections, often comprehensive of all materials published in a country, press the limits of scale in terms of the sizes of collections. A national library collection might, for example, stand…

Resolving Partial Name Mentions Using String Metrics

DTIC Science & Technology

2007-12-01

Ladin) Pair 5: ( Franz Liszt , Franz Listz) These examples typically require one or two string edits to revert from the source to the target name...0.9556 Franz Listz Franz Liszt 2 0.1818 9 franz listz|fran z lisz 0.8182 0.9697 0.9818 The Levenshtein distance metric gives some indication of

Circumventing Graphical User Interfaces in Chemical Engineering Plant Design

ERIC Educational Resources Information Center

Romey, Noel; Schwartz, Rachel M.; Behrend, Douglas; Miao, Peter; Cheung, H. Michael; Beitle, Robert

2007-01-01

Graphical User Interfaces (GUIs) are pervasive elements of most modern technical software and represent a convenient tool for student instruction. For example, GUIs are used for [chemical] process design software (e.g., CHEMCAD, PRO/II and ASPEN) typically encountered in the senior capstone course. Drag and drop aspects of GUIs are challenging for…

Automatic Speech Recognition: Reliability and Pedagogical Implications for Teaching Pronunciation

ERIC Educational Resources Information Center

Kim, In-Seok

2006-01-01

This study examines the reliability of automatic speech recognition (ASR) software used to teach English pronunciation, focusing on one particular piece of software, "FluSpeak, as a typical example." Thirty-six Korean English as a Foreign Language (EFL) college students participated in an experiment in which they listened to 15 sentences…

Learning from Experience--How Development Projects Spread "Good Practice" in Britain.

ERIC Educational Resources Information Center

Clynes, Roger

1992-01-01

Architects and Buildings Branch (A&B) of Department of Education in London, England, is specifically responsible for design and management of educational facilities. Current development project provides example of emphasis, aims, methods of work, and outcome of a typical project. Fact file on British public schools and list of type of reports…

Optimal Weighting for Exam Composition

ERIC Educational Resources Information Center

Ganzfried, Sam; Yusuf, Farzana

2018-01-01

A problem faced by many instructors is that of designing exams that accurately assess the abilities of the students. Typically, these exams are prepared several days in advance, and generic question scores are used based on rough approximation of the question difficulty and length. For example, for a recent class taught by the author, there were…

How Gender Differences in Academic Engagement Relate to Students' Gender Identity

ERIC Educational Resources Information Center

Kessels, Ursula; Heyder, Anke; Latsch, Martin; Hannover, Bettina

2014-01-01

Background: Gender differences in educational outcomes encompass many different areas. For example, in some educational settings, boys lag behind girls on indicators of educational success, such as leaving certificates and type of school attended. In studies testing performance, boys typically show lower competence in reading compared with girls,…

Informed Consent in Research on Second Language Acquisition

ERIC Educational Resources Information Center

Thomas, Margaret; Pettitt, Nicole

2017-01-01

The practice of securing informed consent from research participants has a relatively low profile in second language (L2) acquisition research, despite its prominence in the biomedical and social sciences. This review article analyses the role that informed consent now typically plays in L2 research; discusses an example of an L2 study where…

On the Use of Writing Assignments in Intermediate Microeconomic Theory

ERIC Educational Resources Information Center

O'Neill, Patrick B.

2009-01-01

A typical writing assignment in upper level required courses is a term paper. However many economics majors, particularly those in business schools, need to develop skill at writing shorter pieces. In this paper I describe numerous examples of shorter writing assignments that I have incorporated into an Intermediate Microeconomic Theory course.…

Disciplinary Literacy in History: A Toolkit for Digital Citizenship

ERIC Educational Resources Information Center

Wineburg, Sam; Reisman, Abby

2015-01-01

In this article, we draw clear distinctions between generic reading comprehension and disciplinary literacy in history. We argue that disciplinary reading restores agency to the reader, changing the typical relationship between text and reader, in which knowledge flows down from one to the other. Sourcing, for example, enjoins readers to engage…

The Polygraph and the Privacy Tort.

ERIC Educational Resources Information Center

Barbour, Alton

This paper provides examples of polygraph misuses; details the increasing use of the polygraph inside and outside of law enforcement; explains what a polygraph is, what a typical polygraph test might consist of and its weaknesses in the detection of truth; and analyzes the available research with specific reference to the validity and reliability…

Using Software Tools to Automate the Assessment of Student Programs.

ERIC Educational Resources Information Center

Jackson, David

1991-01-01

Argues that advent of computer-aided instruction (CAI) systems for teaching introductory computer programing makes it imperative that software be developed to automate assessment and grading of student programs. Examples of typical student programing problems are given, and application of the Unix tools Lex and Yacc to the automatic assessment of…

Goal Setting and Decision Making by At-Risk Youth

ERIC Educational Resources Information Center

Galotti, Kathleen M.; Kozberg, Steven F.; Gustafon, Mary

2009-01-01

Typically, adolescence is a time when individuals begin to make consequential, life-framing decisions. However, much of the decision-making literature focuses on high-risk decisions, such as the use of drugs and alcohol, while much less is known about how adolescents make positive decisions, for example, regarding their educational or career…

Power Purchase Agreements | Climate Neutral Research Campuses | NREL

Science.gov Websites

. Examples of how some research campuses have used PPAs are provided below. Power Purchase Agreements , primarily to implement on-site energy installations. The owner, in this case a research campus, is typically Power Purchase Agreements Research campuses can use power purchase agreements (PPAs), such as

High-performance green flexible electronics based on biodegradable cellulose nanofibril paper

Treesearch

Yei Hwan Jung; Tzu-Hsuan Chang; Huilong Zhang; Chunhua Yao; Qifeng Zheng; Vina W. Yang; Hongyi Mi; Munho Kim; Sang June Cho; Dong-Wook Park; Hao Jiang; Juhwan Lee; Yijie Qiu; Weidong Zhou; Zhiyong Cai; Shaoqin Gong; Zhenqiang Ma

2015-01-01

Today’s consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems...

12 CFR 701.36 - Federal credit union ownership of fixed assets.

Code of Federal Regulations, 2014 CFR

2014-01-01

... officer. For example, these individuals typically hold the title of President or Treasurer/Manager... of fixed assets. (a) Scope. (1) Section 107(4) of the Federal Credit Union Act (12 U.S.C. 1757(4... premises; (3) The aggregate of all capital and operating lease payments on fixed assets, without...

Revisiting the Scale-Invariant, Two-Dimensional Linear Regression Method

ERIC Educational Resources Information Center

Patzer, A. Beate C.; Bauer, Hans; Chang, Christian; Bolte, Jan; Su¨lzle, Detlev

2018-01-01

The scale-invariant way to analyze two-dimensional experimental and theoretical data with statistical errors in both the independent and dependent variables is revisited by using what we call the triangular linear regression method. This is compared to the standard least-squares fit approach by applying it to typical simple sets of example data…

Enhancing ecosystem services: Designing for multifunctionality

Treesearch

Mike Dosskey; Gary Wells; Gary Bentrup; Doug Wallace

2012-01-01

It is increasingly recognized that ecosystem services provide a foundation for the well-being of individuals and society (MEA 2005). Land managers typically strive to enhance particularly desirable services. For example, farmers plant crops and manage the soil and hydrologic conditions to favor crop production. In agricultural regions such as the US Corn Belt,...

Feedback and Society: A Study of the Uses of Mass Channels for Coping.

ERIC Educational Resources Information Center

Singer, Benjamin D.

This book deals with methods that individuals use to feed information and opinions back to mass communication systems. Typical examples of mass media and "information centers" were used to study feedback and environmental adjustment. Specifically, the feedback channels investigated are letters to the editor in newspapers, the urban newspaper…

The Bioethics of Music, the Music of Bioethics.

PubMed

Lubet, Alex

2015-12-01

Bioethics is rarely referenced in the scholarship of performing arts medicine (PAM). This essay argues that bioethical concerns loom far larger in the care of PAM patients than might typically be understood. This essay presents Beauchamp and Childress's four principles of bioethics, with examples pertinent to PAM, drawn from the author's research and personal experience.

Formulation and Application of the Hierarchical Generalized Random-Situation Random-Weight MIRID

ERIC Educational Resources Information Center

Hung, Lai-Fa

2011-01-01

The process-component approach has become quite popular for examining many psychological concepts. A typical example is the model with internal restrictions on item difficulty (MIRID) described by Butter (1994) and Butter, De Boeck, and Verhelst (1998). This study proposes a hierarchical generalized random-situation random-weight MIRID. The…

The Intersections of Work, Health, Diversity, and Social Justice: Helping People Living with HIV Disease

ERIC Educational Resources Information Center

Werth, James L., Jr.; Borges, Nicole J.; McNally, Christopher J.; Maguire, Colleen P.; Britton, Paula J.

2008-01-01

Although counseling psychology has discussed vocational issues, health concerns, diversity, and social justice, discussion of these topics has typically been narrowly focused. This article uses the example of persons with HIV (PWHIV) to demonstrate how these areas can be intertwined. The counseling psychology literature is also examined to…

Posthumanism and the MOOC: Opening the Subject of Digital Education

ERIC Educational Resources Information Center

Knox, Jeremy

2016-01-01

As the most prominent initiative in the open education movement, the Massive Open Online Course (MOOC) is often claimed to disrupt established educational models through the use of innovative technologies that overcome geographic and economic barriers to higher education. However, this paper suggests that the MOOC project, as a typical example of…

BURNER RIG TESTING OF A500 C/SiC

DTIC Science & Technology

2018-03-17

test program characterized the durability behavior of A500® C/SiC ceramic matrix composite material at room and elevated temperature . Specimens were...7 Figure 6. Typical Room- Temperature Tensile Stress-Versus-Strain Trace for As-Manufactured A500...Operation ......................................... 18 Figure 17. Example of the Burner Rig Temperature Profiles Used

Relevancy in Problem Solving: A Computational Framework

ERIC Educational Resources Information Center

Kwisthout, Johan

2012-01-01

When computer scientists discuss the computational complexity of, for example, finding the shortest path from building A to building B in some town or city, their starting point typically is a formal description of the problem at hand, e.g., a graph with weights on every edge where buildings correspond to vertices, routes between buildings to…

Modern Kaleidophones

ERIC Educational Resources Information Center

Daffron, John A.; Greenslade, Thomas B., Jr.

2015-01-01

The Kaleidophone, invented by Charles Wheatstone (1802-1875) in 1827, is a delightful mixture of physics and art. A typical example of the device, dating from the latter part of the 19th century, is shown in Fig. 1. The upright rods, which are approximately 25 cm in length, are of variously circular, oval, square, and rectangular cross section,…

Morning NO2 Exposure Sensitizes Hypertensive Rats to the Cardiovascular Effects of Same Day O3 Exposure in the Afternoon

EPA Science Inventory

Within urban air sheds specific ambient air pollutants typically peak at predictable times throughout the day. For example, in environments dominated by mobile sources, peak nitrogen dioxide (NO2) and particulate matter levels coincide with morning and afternoon rush hours , whil...

University Exceptional Admission during the Republic of China

ERIC Educational Resources Information Center

Tao, Li

2014-01-01

The stories of many universities' exceptive admission during the republic period of China were widely circulated. The typical example of these universities' exceptional admission was the very product of special historical condition, which had its own characteristics, but also conforms to the general rule, so it can be cited. To select special…

Grooming Cybervictims: The Psychosocial Effects of Online Exploitation for Youth.

ERIC Educational Resources Information Center

Berson, Ilene R.

2003-01-01

Presents an overview of the benefits and risks of Web-based interactions for youth. Discusses, as an illustrative example, the psychosocial effects of online "grooming" practices that are designed to lure and exploit children by enticing them, typically in a nonsexual way, toward a sexual encounter. Suggests constructive solutions and a…

Using Niche-Market Magazines to Teach Audience

ERIC Educational Resources Information Center

Tichenor, Stuart

2006-01-01

In technical writing classes, audience is one of the most important concepts. Technical writing is typically written to a specific audience for a specific purpose. In addition, as audiences change, so must the way a document is written. An audience's lack of knowledge in a technical area, for example, would require more background information or…

Optical Detection of Degraded Therapeutic Proteins.

PubMed

Herrington, William F; Singh, Gajendra P; Wu, Di; Barone, Paul W; Hancock, William; Ram, Rajeev J

2018-03-23

The quality of therapeutic proteins such as hormones, subunit and conjugate vaccines, and antibodies is critical to the safety and efficacy of modern medicine. Identifying malformed proteins at the point-of-care can prevent adverse immune reactions in patients; this is of special concern when there is an insecure supply chain resulting in the delivery of degraded, or even counterfeit, drug product. Identification of degraded protein, for example human growth hormone, is demonstrated by applying automated anomaly detection algorithms. Detection of the degraded protein differs from previous applications of machine-learning and classification to spectral analysis: only example spectra of genuine, high-quality drug products are used to construct the classifier. The algorithm is tested on Raman spectra acquired on protein dilutions typical of formulated drug product and at sample volumes of 25 µL, below the typical overfill (waste) volumes present in vials of injectable drug product. The algorithm is demonstrated to correctly classify anomalous recombinant human growth hormone (rhGH) with 92% sensitivity and 98% specificity even when the algorithm has only previously encountered high-quality drug product.

Necessity and Contention of Education on Engineer Ethics

NASA Astrophysics Data System (ADS)

Takeda, Kunihiko; Ishikawa, Tomoyuki

Using examples of major accidents caused by technical technology are effective when teaching engineering ethics in undergraduate courses because almost all students have had no actual experience in technical problems or accidents in their lives. The typical accidents that have been selected in the past for this purpose by lecturers are limited in Japanese colleges or in textbooks. Some examples are the Minamata disease, the Kanemi oil PCB contamination, the space shuttle “Challenger” accident, the Ford “Pinto” design problem, Mitsubishi Motor's scandal and the unclear power plant accident at Tokai. However, it is difficult to decide whether or not these typical accidents are suitable for the teaching of engineering ethics. The responsibility of an engineer in Japan is strictly limited because he has no authority to finally decide upon the problem of ethics even if the item is purely technical and he is the best person to make the decision. The reason is discussed focusing on 1) the concept of the “profession” of medical doctors and engineers and 2) the relationships between the treatment, position, honor and responsibility of engineers in Japanese society.

Apples are not the only fruit: the effects of concept typicality on semantic representation in the anterior temporal lobe

PubMed Central

Woollams, Anna M.

2012-01-01

Intuitively, an apple seems a fairly good example of a fruit, whereas an avocado seems less so. The extent to which an exemplar is representative of its category, referred to here as concept typicality, has long been thought to be a key dimension determining semantic representation. Concept typicality is, however, correlated with a number of other variables, in particular age of acquisition (AoA) and name frequency. Consideration of picture naming accuracy from a large case-series of semantic dementia (SD) patients demonstrated strong effects of concept typicality that were maximal in the moderately impaired patients, over and above the impact of AoA and name frequency. Induction of a temporary virtual lesion to the left anterior temporal lobe, the region most commonly affected in SD, via repetitive Transcranial Magnetic Stimulation produced an enhanced effect of concept typicality in the picture naming of normal participants, but did not affect the magnitude of the AoA or name frequency effects. These results indicate that concept typicality exerts its influence on semantic representations themselves, as opposed to the strength of connections outside the semantic system. To date, there has been little direct exploration of the dimension of concept typicality within connectionist models of intact and impaired conceptual representation, and these findings provide a target for future computational simulation. PMID:22529789

Solar excitation of CdS/Cu2S photovoltaic cells

NASA Technical Reports Server (NTRS)

Boer, K. W.

1976-01-01

Solar radiation of five typical clear weather days and under a variety of conditions is used to determine the spectral distribution of the photonflux at different planes of a CdS/Cu2S solar cell. The fractions of reflected and absorbed flux are determined at each of the relevant interfaces and active volume elements of the solar cell. The density of absorbed photons is given in respect to spectral and spatial distribution. The variance of the obtained distribution, with changes in insolation and absorption spectra of the active solar cell layers, is indicated. A catalog of typical examples is given in the appendix.

A security mediator for health care information.

PubMed Central

Wiederhold, G.; Bilello, M.; Sarathy, V.; Qian, X.

1996-01-01

The TIHI (Trusted Interoperation of Healthcare Information) project addresses a security issue that arises when some information is being shared among collaborating enterprises, although not all enterprise information is sharable. It assumes that protection exists to prevent intrusion by adversaries through secure transmission and firewalls. The TIHI system design provides a gateway, owned by the enterprise security officer, to mediate queries and responses. The latter are typically transmitted via the Internet. The enterprise policy is determined by rules provided to the mediator. We show examples of typical rules. The problem and our solution, although developed in a healthcare context, is equally valid among collaborating enterprises. PMID:8947640

Cougar attacks on children: injury patterns and treatment.

PubMed

Kadesky, K M; Manarey, C; Blair, G K; Murphy, J J; Verchere, C; Atkinson, K

1998-06-01

Cougar attacks on humans appear to be on the rise. A review of all attacks on children was performed to determine the method of attack and injury patterns so that a treatment regimen as well as possible preventative measures could be determined. A review of all attacks, including attacks on children, was performed, including three recent attacks treated at our institution. Situation, adult supervision, patient age, injuries recorded, survival, and mode of attack, if known, were reviewed. There were 50 documented attacks on children with a 25% fatality rate. Most children were not alone at the time of the attack (92%), and in many instances adult supervision was present or nearby. Severe head and neck lacerations along with puncture wounds were the most common injury. Examples of typical cervical injuries include a nonfatal vertebral artery injury, phrenic nerve injury, a fatal internal carotid artery injury, and a fatal cervical spine injury. The cougar was rabid in two cases. Pasteurella resulted in late infections in two patients. Based on the pattern of injuries, the authors recommend aggressive evaluation for occult cervical injuries as well as surgical debridement. Antibiotics should cover oropharyngeal flora including Pasteurella multocida. Rabies prophylaxis is indicated. Adult supervision in wilderness areas is not necessarily protective.

Regional Climate Enterprises in the South Central U.S.: Crossover Relationships to Maximize User Engagement Effectiveness

NASA Astrophysics Data System (ADS)

Langston, M. A.; Shafer, M.; Bartush, B.; Brown, D. P.

2016-12-01

Several Federal agencies have recently established regional enterprises that provide climate science and services. These include DOI's Climate Science Centers (CSCs), USDA's Regional Climate Hubs (Hubs), DOI's Landscape Conservation Cooperatives (LCCs), and NOAA's Regional Integrated Sciences and Assessments Programs (RISAs), all of which have missions that include translating climate information for various constituencies and user groups. Each of these organizations makes a unique contribution to the regional climate services landscape; however, the potential for duplication of effort is also present. To ensure that appropriate levels of programmatic coordination are taking place, these entities have developed roles and relationships that crossover between organizations. These efforts have typically not been formally codified or prescribed; rather, they have developed organically and effectively in a fashion appropriate for the regional context. In this presentation, both advantages and disadvantages of this approach are addressed via examples from the South Central U.S. Advantages include flexibility and the development of extensive, multi-disciplinary networks; disadvantages include the lack of a holistic approach to oversight and planning. Best practices and opportunities to continue strengthening cross-organizational regional efficiencies are also highlighted.

Accounting for multiple sources of uncertainty in impact assessments: The example of the BRACE study

NASA Astrophysics Data System (ADS)

O'Neill, B. C.

2015-12-01

Assessing climate change impacts often requires the use of multiple scenarios, types of models, and data sources, leading to a large number of potential sources of uncertainty. For example, a single study might require a choice of a forcing scenario, climate model, bias correction and/or downscaling method, societal development scenario, model (typically several) for quantifying elements of societal development such as economic and population growth, biophysical model (such as for crop yields or hydrology), and societal impact model (e.g. economic or health model). Some sources of uncertainty are reduced or eliminated by the framing of the question. For example, it may be useful to ask what an impact outcome would be conditional on a given societal development pathway, forcing scenario, or policy. However many sources of uncertainty remain, and it is rare for all or even most of these sources to be accounted for. I use the example of a recent integrated project on the Benefits of Reduced Anthropogenic Climate changE (BRACE) to explore useful approaches to uncertainty across multiple components of an impact assessment. BRACE comprises 23 papers that assess the differences in impacts between two alternative climate futures: those associated with Representative Concentration Pathways (RCPs) 4.5 and 8.5. It quantifies difference in impacts in terms of extreme events, health, agriculture, tropical cyclones, and sea level rise. Methodologically, it includes climate modeling, statistical analysis, integrated assessment modeling, and sector-specific impact modeling. It employs alternative scenarios of both radiative forcing and societal development, but generally uses a single climate model (CESM), partially accounting for climate uncertainty by drawing heavily on large initial condition ensembles. Strengths and weaknesses of the approach to uncertainty in BRACE are assessed. Options under consideration for improving the approach include the use of perturbed physics ensembles of CESM, employing results from multiple climate models, and combining the results from single impact models with statistical representations of uncertainty across multiple models. A key consideration is the relationship between the question being addressed and the uncertainty approach.

Recognition Using Hybrid Classifiers.

PubMed

Osadchy, Margarita; Keren, Daniel; Raviv, Dolev

2016-04-01

A canonical problem in computer vision is category recognition (e.g., find all instances of human faces, cars etc., in an image). Typically, the input for training a binary classifier is a relatively small sample of positive examples, and a huge sample of negative examples, which can be very diverse, consisting of images from a large number of categories. The difficulty of the problem sharply increases with the dimension and size of the negative example set. We propose to alleviate this problem by applying a "hybrid" classifier, which replaces the negative samples by a prior, and then finds a hyperplane which separates the positive samples from this prior. The method is extended to kernel space and to an ensemble-based approach. The resulting binary classifiers achieve an identical or better classification rate than SVM, while requiring far smaller memory and lower computational complexity to train and apply.

3D Tensorial Elastodynamics for Isotropic Media on Vertically Deformed Meshes

NASA Astrophysics Data System (ADS)

Shragge, J. C.

2017-12-01

Solutions of the 3D elastodynamic wave equation are sometimes required in industrial and academic applications of elastic reverse-time migration (E-RTM) and full waveform inversion (E-FWI) that involve vertically deformed meshes. Examples include incorporating irregular free-surface topography and handling internal boundaries (e.g., water bottom) directly into the computational meshes. In 3D E-RTM and E-FWI applications, the number of forward modeling simulations can number in the tens of thousands (per iteration), which necessitates the development of stable, accurate and efficient 3D elastodynamics solvers. For topographic scenarios, most finite-difference solution approaches use a change-of-variable strategy that has a number of associated computational challenges, including difficulties in handling of the free-surface boundary condition. In this study, I follow a tensorial approach and use a generalized family of analytic transforms to develop a set of analytic equations for 3D elastodynamics that directly incorporates vertical grid deformations. Importantly, this analytic approach allows for the specification of an analytic free-surface boundary condition appropriate for vertically deformed meshes. These equations are both straightforward and efficient to solve using a velocity-stress formulation with finite-difference (MFD) operators implemented on a fully staggered grid. Moreover, I demonstrate that the use of mimetic finite difference (MFD) methods allows stable, accurate, and efficient numerical solutions to be simulated for typical topographic scenarios. Examples demonstrate that high-quality elastic wavefields can be generated for topographic surfaces exhibiting significant topographic relief.

Freeze Casting for Assembling Bioinspired Structural Materials.

PubMed

Cheng, Qunfeng; Huang, Chuanjin; Tomsia, Antoni P

2017-12-01

Nature is very successful in designing strong and tough, lightweight materials. Examples include seashells, bone, teeth, fish scales, wood, bamboo, silk, and many others. A distinctive feature of all these materials is that their properties are far superior to those of their constituent phases. Many of these natural materials are lamellar or layered in nature. With its "brick and mortar" structure, nacre is an example of a layered material that exhibits extraordinary physical properties. Finding inspiration in living organisms to create bioinspired materials is the subject of intensive research. Several processing techniques have been proposed to design materials mimicking natural materials, such as layer-by-layer deposition, self-assembly, electrophoretic deposition, hydrogel casting, doctor blading, and many others. Freeze casting, also known as ice-templating, is a technique that has received considerable attention in recent years to produce bioinspired bulk materials. Here, recent advances in the freeze-casting technique are reviewed for fabricating lamellar scaffolds by assembling different dimensional building blocks, including nanoparticles, polymer chains, nanofibers, and nanosheets. These lamellar scaffolds are often infiltrated by a second phase, typically a soft polymer matrix, a hard ceramic matrix, or a metal matrix. The unique architecture of the resultant bioinspired structural materials displays excellent mechanical properties. The challenges of the current research in using the freeze-casting technique to create materials large enough to be useful are also discussed, and the technique's promise for fabricating high-performance nacre-inspired structural materials in the future is reviewed. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Evaluating and Evolving Metadata in Multiple Dialects

NASA Astrophysics Data System (ADS)

Kozimor, J.; Habermann, T.; Powers, L. A.; Gordon, S.

2016-12-01

Despite many long-term homogenization efforts, communities continue to develop focused metadata standards along with related recommendations and (typically) XML representations (aka dialects) for sharing metadata content. Different representations easily become obstacles to sharing information because each representation generally requires a set of tools and skills that are designed, built, and maintained specifically for that representation. In contrast, community recommendations are generally described, at least initially, at a more conceptual level and are more easily shared. For example, most communities agree that dataset titles should be included in metadata records although they write the titles in different ways. This situation has led to the development of metadata repositories that can ingest and output metadata in multiple dialects. As an operational example, the NASA Common Metadata Repository (CMR) includes three different metadata dialects (DIF, ECHO, and ISO 19115-2). These systems raise a new question for metadata providers: if I have a choice of metadata dialects, which should I use and how do I make that decision? We have developed a collection of metadata evaluation tools that can be used to evaluate metadata records in many dialects for completeness with respect to recommendations from many organizations and communities. We have applied these tools to over 8000 collection and granule metadata records in four different dialects. This large collection of identical content in multiple dialects enables us to address questions about metadata and dialect evolution and to answer those questions quantitatively. We will describe those tools and results from evaluating the NASA CMR metadata collection.

Methods for both coating a substrate with aluminum oxide and infusing the substrate with elemental aluminum

DOEpatents

Choi, Jung-Pyung; Weil, Kenneth Scott

2016-11-01

Methods of aluminizing the surface of a metal substrate. The methods of the present invention do not require establishment of a vacuum or a reducing atmosphere, as is typically necessary. Accordingly, aluminization can occur in the presence of oxygen, which greatly simplifies and reduces processing costs by allowing deposition of the aluminum coating to be performed, for example, in air. Embodiments of the present invention can be characterized by applying a slurry that includes a binder and powder granules containing aluminum to the metal substrate surface. Then, in a combined step, a portion of the aluminum is diffused into the substrate and a portion of the aluminum is oxidized by heating the slurry to a temperature greater than the melting point of the aluminum in an oxygen-containing atmosphere.

Newly Developed Techniques on Polycondensation, Ring-Opening Polymerization and Polymer Modification: Focus on Poly(Lactic Acid)

PubMed Central

Hu, Yunzi; Daoud, Walid A.; Cheuk, Kevin Ka Leung; Lin, Carol Sze Ki

2016-01-01

Polycondensation and ring-opening polymerization are two important polymer synthesis methods. Poly(lactic acid), the most typical biodegradable polymer, has been researched extensively from 1900s. It is of significant importance to have an up-to-date review on the recent improvement in techniques for biodegradable polymers. This review takes poly(lactic acid) as the example to present newly developed polymer synthesis techniques on polycondensation and ring-opening polymerization reported in the recent decade (2005–2015) on the basis of industrial technique modifications and advanced laboratory research. Different polymerization methods, including various solvents, heating programs, reaction apparatus and catalyst systems, are summarized and compared with the current industrial production situation. Newly developed modification techniques for polymer properties improvement are also discussed based on the case of poly(lactic acid). PMID:28773260

Characterization of underwater optical turbulence on the example of the Rayleigh-Benard water tank

NASA Astrophysics Data System (ADS)

Gladysz, Szymon; Barros, Rui; Kanaev, Andrey V.; Hou, Weilin

2017-09-01

For many years sound has been used as a primary method for underwater communication. However, data transmission rate of acoustic systems is low because typical frequencies associated with underwater acoustics are between tens of hertz and hundreds of kilohertz. A higher bandwidth can be achieved with visible light to transfer data underwater. The first challenge for underwater laser communication is scattering and absorption. In addition, there are disturbances caused by spatial and temporal changes in the water refraction index due to temperature and/or salinity variations. Optical turbulence, which includes the two effects, is the main theme of this paper. We will discuss the joint IOSB-NRL experiment whose goal was to test techniques for characterization of underwater optical turbulence and in particular we will focus on differential motion measurement from an LED array.

Vocal learning beyond imitation: mechanisms of adaptive vocal development in songbirds and human infants

PubMed Central

Tchernichovski, Ofer; Marcus, Gary

2014-01-01

Studies of vocal learning in songbirds typically focus on the acquisition of sensory templates for song imitation and on the consequent process of matching song production to templates. However, functional vocal development also requires the capacity to adaptively diverge from sensory templates, and to flexibly assemble vocal units. Examples of adaptive divergence include the corrective imitation of abnormal songs, and the decreased tendency to copy overabundant syllables. Such frequency-dependent effects might mirror tradeoffs between the assimilation of group identity (culture) while establishing individual and flexibly expressive songs. Intriguingly, although the requirements for vocal plasticity vary across songbirds, and more so between birdsong and language, the capacity to flexibly assemble vocal sounds develops in a similar, stepwise manner across species. Therefore, universal features of vocal learning go well beyond the capacity to imitate. PMID:25005823

LLNL small-scale static spark machine: static spark sensitivity test

DOE Office of Scientific and Technical Information (OSTI.GOV)

Foltz, M F; Simpson, L R

1999-08-23

Small-scale safety testing of explosives and other energetic materials is done in order to determine their sensitivity to various stimuli, such as friction, static spark, and impact. Typically this testing is done to discover potential handling problems that may exist for either newly synthesized materials of unknown behavior, or materials that have been stored for long periods of time. This report describes the existing ''Static Spark Test Apparatus'' at Lawrence Livermore National Laboratory (LLNL), as well as the method used to evaluate the relative static spark sensitivity of energetic materials. The basic design, originally developed by the Picatinny Arsenal inmore » New Jersey, is discussed. The accumulated data for the materials tested to date is not included here, with the exception of specific examples that have yielded interesting or unusual results during the tests.« less

Microseed matrix screening for optimization in protein crystallization: what have we learned?

PubMed

D'Arcy, Allan; Bergfors, Terese; Cowan-Jacob, Sandra W; Marsh, May

2014-09-01

Protein crystals obtained in initial screens typically require optimization before they are of X-ray diffraction quality. Seeding is one such optimization method. In classical seeding experiments, the seed crystals are put into new, albeit similar, conditions. The past decade has seen the emergence of an alternative seeding strategy: microseed matrix screening (MMS). In this strategy, the seed crystals are transferred into conditions unrelated to the seed source. Examples of MMS applications from in-house projects and the literature include the generation of multiple crystal forms and different space groups, better diffracting crystals and crystallization of previously uncrystallizable targets. MMS can be implemented robotically, making it a viable option for drug-discovery programs. In conclusion, MMS is a simple, time- and cost-efficient optimization method that is applicable to many recalcitrant crystallization problems.

Microseed matrix screening for optimization in protein crystallization: what have we learned?

PubMed Central

D’Arcy, Allan; Bergfors, Terese; Cowan-Jacob, Sandra W.; Marsh, May

2014-01-01

Protein crystals obtained in initial screens typically require optimization before they are of X-ray diffraction quality. Seeding is one such optimization method. In classical seeding experiments, the seed crystals are put into new, albeit similar, conditions. The past decade has seen the emergence of an alternative seeding strategy: microseed matrix screening (MMS). In this strategy, the seed crystals are transferred into conditions unrelated to the seed source. Examples of MMS applications from in-house projects and the literature include the generation of multiple crystal forms and different space groups, better diffracting crystals and crystallization of previously uncrystallizable targets. MMS can be implemented robotically, making it a viable option for drug-discovery programs. In conclusion, MMS is a simple, time- and cost-efficient optimization method that is applicable to many recalcitrant crystallization problems. PMID:25195878

NASA DFRC Practices for Prototype Qualification

NASA Technical Reports Server (NTRS)

Lokos, William A.

2009-01-01

This slide presentation reviews the practices that Dryden uses for qualification of the prototypes of aircraft. There are many views of aircraft that Dryden has worked with. Included is a discussion of basic considerations for strength, a listing of standards and references, a discussion of typical safety of flight approaches, a discussion of the prototype design, using the X-29A as an example, and requirements for new shapes (i.e., the DAST-ARW1 , F-8 Super Critical Wing, AFTI/F-111 MAW), new control laws (i.e., AAW F-18), new operating envelope (i.e., F-18 HARV), limited sope add-on or substitute structure (i.e., SR-71 LASRE, ECLIPSE, F-16XL SLFC), and extensively modified or replaced structure (i.e., SOFIA, B747SP). There is a listing of causes for the failure of the prototype.

[Operative applications of occupational therapy].

PubMed

Saade, A

2010-01-01

Occupational therapy is the branch of rehabilitation whose main aim is to achieve maximum possible autonomy of the disabled person and the most complete integration into society, family and work. In subjects with motor disabilities following an occupational injury, the re-education programme includes a series of interventions aimed at progressive recovery of the ability to carry out work tasks compatible with the residual motor capacity of the worker. This article presents some examples related to the different stages making up the specific re-education programme: from the initial stages (with more purely kinesiotherapeutic techniques) directed at recovering movements and muscle strength, to the intermediate and final stages (more typically ergotherapeutic) directed first at the recovery of basic functions (clasping, pulling, pushing, lifting, lowering, carrying, etc.) and then, finally, retraining of work movements, with the introduction of compensatory methods and/or use of auxiliaries, when necessary.

Cultural narratives and the succession scenario: Slumdog Millionaire and other popular films and fictions.

PubMed

Paul, Robert A

2011-04-01

An approach to the analysis of cultural narratives is proposed drawing inspiration from Lévi-Strauss's analysis of myths as fantasied resolutions of conflicts and contradictions in culture and of typical dilemmas of human life. An example of such an analysis revolves around contradictions in the Western cultural construction of the succession of generations. The logic of the structural analysis of cultural representations is explicated, the schema of the succession scenario is laid out, and the conflicts that generate it are identified. The movie Slumdog Millionaire is examined in some detail as an illustration of the succession scenario at work, and a comparative analysis shows how the same underlying schema accounts for otherwise obscure aspects of comparable contemporary popular narratives including Harry Potter, The Lion King and Star Wars. Copyright © 2011 Institute of Psychoanalysis.

Effect of Nanoparticle Incorporation and Surface Coating on Mechanical Properties of Bone Scaffolds: A Brief Review

PubMed Central

Corona-Gomez, Jesus; Chen, Xiongbiao; Yang, Qiaoqin

2016-01-01

Mechanical properties of a scaffold play an important role in its in vivo performance in bone tissue engineering, due to the fact that implanted scaffolds are typically subjected to stress including compression, tension, torsion, and shearing. Unfortunately, not all the materials used to fabricate scaffolds are strong enough to mimic native bones. Extensive research has been conducted in order to increase scaffold strength and mechanical performance by incorporating nanoparticles and/or coatings. An incredible improvement has been achieved; and some outstanding examples are the usage of nanodiamond, hydroxyapatite, bioactive glass particles, SiO2, MgO, and silver nanoparticles. This review paper aims to present the results, to summarize significant findings, and to give perspective for future work, which could be beneficial to future bone tissue engineering. PMID:27420104

Nexus: a modular workflow management system for quantum simulation codes

DOE PAGES

Krogel, Jaron T.

2015-08-24

The management of simulation workflows is a significant task for the individual computational researcher. Automation of the required tasks involved in simulation work can decrease the overall time to solution and reduce sources of human error. A new simulation workflow management system, Nexus, is presented to address these issues. Nexus is capable of automated job management on workstations and resources at several major supercomputing centers. Its modular design allows many quantum simulation codes to be supported within the same framework. Current support includes quantum Monte Carlo calculations with QMCPACK, density functional theory calculations with Quantum Espresso or VASP, and quantummore » chemical calculations with GAMESS. Users can compose workflows through a transparent, text-based interface, resembling the input file of a typical simulation code. A usage example is provided to illustrate the process.« less

Virtual prototyping of drop test using explicit analysis

NASA Astrophysics Data System (ADS)

Todorov, Georgi; Kamberov, Konstantin

2017-12-01

Increased requirements for reliability and safety, included in contemporary standards and norms, has high impact over new product development. New numerical techniques based on virtual prototyping technology, facilitates imrpoving product development cycle, resutling in reduced time/money spent for this stage as well as increased knowledge about certain failure mechanism. So called "drop test" became nearly a "must" step in development of any human operated product. This study aims to demonstrate dynamic behaviour assessment of a structure under impact loads, based on virtual prototyping using a typical nonlinear analysis - explicit dynamics. An example is presneted, based on a plastic container that is used as cartridge for a dispenser machine exposed to various work conditions. Different drop orientations were analyzed and critical load cases and design weaknesses have been found. Several design modifications have been proposed, based on detailed analyses results review.

Online Serum PFOA Calculator for Adults

PubMed Central

2017-01-01

Summary: Perfluorooctanoic acid (PFOA) is a persistent environmental contaminant that has been detected in >100 public water systems in the United States alone. A variety of epidemiological investigations of PFOA have been published, mostly using measured or modeled serum PFOA concentrations as the exposure metric. Comparison of drinking water PFOA concentrations to those study findings or to typical serum concentrations requires pharmacokinetic modeling. This brief communication describes an online Javascript calculator that easily plots the expected serum PFOA concentration over time and at steady state for adults after starting or stopping consumption of PFOA-contaminated water. Two examples of usage are provided, including increasing serum PFOA after ongoing consumption of contaminated water at the federal limit, and decreasing serum PFOA after carbon filtration began in a contaminated water system. https://doi.org/10.1289/EHP2820 PMID:29068316

OBSERVING LYAPUNOV EXPONENTS OF INFINITE-DIMENSIONAL DYNAMICAL SYSTEMS

PubMed Central

OTT, WILLIAM; RIVAS, MAURICIO A.; WEST, JAMES

2016-01-01

Can Lyapunov exponents of infinite-dimensional dynamical systems be observed by projecting the dynamics into ℝN using a ‘typical’ nonlinear projection map? We answer this question affirmatively by developing embedding theorems for compact invariant sets associated with C1 maps on Hilbert spaces. Examples of such discrete-time dynamical systems include time-T maps and Poincaré return maps generated by the solution semigroups of evolution partial differential equations. We make every effort to place hypotheses on the projected dynamics rather than on the underlying infinite-dimensional dynamical system. In so doing, we adopt an empirical approach and formulate checkable conditions under which a Lyapunov exponent computed from experimental data will be a Lyapunov exponent of the infinite-dimensional dynamical system under study (provided the nonlinear projection map producing the data is typical in the sense of prevalence). PMID:28066028

Ultrasound Imaging Velocimetry: a review

NASA Astrophysics Data System (ADS)

Poelma, Christian

2017-01-01

Whole-field velocity measurement techniques based on ultrasound imaging (a.k.a. `ultrasound imaging velocimetry' or `echo-PIV') have received significant attention from the fluid mechanics community in the last decade, in particular because of their ability to obtain velocity fields in flows that elude characterisation by conventional optical methods. In this review, an overview is given of the history, typical components and challenges of these techniques. The basic principles of ultrasound image formation are summarised, as well as various techniques to estimate flow velocities; the emphasis is on correlation-based techniques. Examples are given for a wide range of applications, including in vivo cardiovascular flow measurements, the characterisation of sediment transport and the characterisation of complex non-Newtonian fluids. To conclude, future opportunities are identified. These encompass not just optimisation of the accuracy and dynamic range, but also extension to other application areas.

Two-dimensional inorganic analogues of graphene: transition metal dichalcogenides.

PubMed

Jana, Manoj K; Rao, C N R

2016-09-13

The discovery of graphene marks a major event in the physics and chemistry of materials. The amazing properties of this two-dimensional (2D) material have prompted research on other 2D layered materials, of which layered transition metal dichalcogenides (TMDCs) are important members. Single-layer and few-layer TMDCs have been synthesized and characterized. They possess a wide range of properties many of which have not been known hitherto. A typical example of such materials is MoS2 In this article, we briefly present various aspects of layered analogues of graphene as exemplified by TMDCs. The discussion includes not only synthesis and characterization, but also various properties and phenomena exhibited by the TMDCs.This article is part of the themed issue 'Fullerenes: past, present and future, celebrating the 30th anniversary of Buckminster Fullerene'. © 2016 The Author(s).

Two-dimensional inorganic analogues of graphene: transition metal dichalcogenides

PubMed Central

Jana, Manoj K.; Rao, C. N. R.

2016-01-01

The discovery of graphene marks a major event in the physics and chemistry of materials. The amazing properties of this two-dimensional (2D) material have prompted research on other 2D layered materials, of which layered transition metal dichalcogenides (TMDCs) are important members. Single-layer and few-layer TMDCs have been synthesized and characterized. They possess a wide range of properties many of which have not been known hitherto. A typical example of such materials is MoS2. In this article, we briefly present various aspects of layered analogues of graphene as exemplified by TMDCs. The discussion includes not only synthesis and characterization, but also various properties and phenomena exhibited by the TMDCs. This article is part of the themed issue ‘Fullerenes: past, present and future, celebrating the 30th anniversary of Buckminster Fullerene’. PMID:27501969

Plasma-based EUV light source

DOEpatents

Shumlak, Uri; Golingo, Raymond; Nelson, Brian A.

2010-11-02

Various mechanisms are provided relating to plasma-based light source that may be used for lithography as well as other applications. For example, a device is disclosed for producing extreme ultraviolet (EUV) light based on a sheared plasma flow. The device can produce a plasma pinch that can last several orders of magnitude longer than what is typically sustained in a Z-pinch, thus enabling the device to provide more power output than what has been hitherto predicted in theory or attained in practice. Such power output may be used in a lithography system for manufacturing integrated circuits, enabling the use of EUV wavelengths on the order of about 13.5 nm. Lastly, the process of manufacturing such a plasma pinch is discussed, where the process includes providing a sheared flow of plasma in order to stabilize it for long periods of time.

Orbital construction support equipment

NASA Technical Reports Server (NTRS)

1977-01-01

Approximately 200 separate construction steps were defined for the three solar power satellite (SPS) concepts. Detailed construction scenarios were developed which describe the specific tasks to be accomplished, and identify general equipment requirements. The scenarios were used to perform a functional analysis, which resulted in the definition of 100 distinct SPS elements. These elements are the components, parts, subsystems, or assemblies upon which construction activities take place. The major SPS elements for each configuration are shown. For those elements, 300 functional requirements were identified in seven generic processes. Cumulatively, these processes encompass all functions required during SPS construction/assembly. Individually each process is defined such that it includes a specific type of activity. Each SPS element may involve activities relating to any or all of the generic processes. The processes are listed, and examples of the requirements defined for a typical element are given.

Advances in the surface modification techniques of bone-related implants for last 10 years

PubMed Central

Qiu, Zhi-Ye; Chen, Cen; Wang, Xiu-Mei; Lee, In-Seop

2014-01-01

At the time of implanting bone-related implants into human body, a variety of biological responses to the material surface occur with respect to surface chemistry and physical state. The commonly used biomaterials (e.g. titanium and its alloy, Co–Cr alloy, stainless steel, polyetheretherketone, ultra-high molecular weight polyethylene and various calcium phosphates) have many drawbacks such as lack of biocompatibility and improper mechanical properties. As surface modification is very promising technology to overcome such problems, a variety of surface modification techniques have been being investigated. This review paper covers recent advances in surface modification techniques of bone-related materials including physicochemical coating, radiation grafting, plasma surface engineering, ion beam processing and surface patterning techniques. The contents are organized with different types of techniques to applicable materials, and typical examples are also described. PMID:26816626

State-Estimation Algorithm Based on Computer Vision

NASA Technical Reports Server (NTRS)

Bayard, David; Brugarolas, Paul

2007-01-01

An algorithm and software to implement the algorithm are being developed as means to estimate the state (that is, the position and velocity) of an autonomous vehicle, relative to a visible nearby target object, to provide guidance for maneuvering the vehicle. In the original intended application, the autonomous vehicle would be a spacecraft and the nearby object would be a small astronomical body (typically, a comet or asteroid) to be explored by the spacecraft. The algorithm could also be used on Earth in analogous applications -- for example, for guiding underwater robots near such objects of interest as sunken ships, mineral deposits, or submerged mines. It is assumed that the robot would be equipped with a vision system that would include one or more electronic cameras, image-digitizing circuitry, and an imagedata- processing computer that would generate feature-recognition data products.

Applications of the generalized information processing system (GIPSY)

USGS Publications Warehouse

Moody, D.W.; Kays, Olaf

1972-01-01

The Generalized Information Processing System (GIPSY) stores and retrieves variable-field, variable-length records consisting of numeric data, textual data, or codes. A particularly noteworthy feature of GIPSY is its ability to search records for words, word stems, prefixes, and suffixes as well as for numeric values. Moreover, retrieved records may be printed on pre-defined formats or formatted as fixed-field, fixed-length records for direct input to other-programs, which facilitates the exchange of data with other systems. At present there are some 22 applications of GIPSY falling in the general areas of bibliography, natural resources information, and management science, This report presents a description of each application including a sample input form, dictionary, and a typical formatted record. It is hoped that these examples will stimulate others to experiment with innovative uses of computer technology.

High Performance Materials Applications to Moon/Mars Missions and Bases

NASA Technical Reports Server (NTRS)

Noever, David A.; Smith, David D.; Sibille, Laurent; Brown, Scott C.; Cronise, Raymond J.; Lehoczky, Sandor L.

1998-01-01

Two classes of material processing scenarios will feature prominently in future interplanetary exploration- in situ production using locally available materials in lunar or planetary landings and high performance structural materials which carve out a set of properties for uniquely hostile space environments. To be competitive, high performance materials must typically offer orders of magnitude improvements in thermal conductivity or insulation, deliver high strength-to-weight ratios, or provide superior durability (low corrosion and/or ablative character, e.g. in heat shields). The space-related environmental parameters of high radiation flux, low weight and superior reliability limits many typical aerospace materials to a short list comprising high performance alloys, nanocomposites and thin-layer metal laminates (Al-Cu, Al-Ag) with typical dimensions less than the Frank-Reed-type dislocation source. Extremely light weight carbon-carbon composites and car on aerogels will be presented as novel examples which define broadened material parameters, particularly owing to their extreme thermal insulation (R-32-64) and low densities (less than 0.01 g/cc) approaching that of air itself. Even with these low weight payload additions, rocket thrust limits and transport costs will always place a premium on assembling as much structural and life support resources upon interplanetary, lunar or asteroid arrival. As an example for in situ lunar glass manufacture, solar furnaces reaching 1700 C for pure silica glass manufacture in situ are compared with sol-gel technology and acid-leached ultrapure (less than 0.1% FeO) silica aerogel precursors.

High Performance Materials Applications to Moon/Mars Missions and Bases

NASA Technical Reports Server (NTRS)

Noever, David A.; Smith, David D.; Sibille, Laurent; Brown, Scott C.; Cronise, Raymond J.; Lehoczky, Sandor L.

1998-01-01

Two classes of material processing scenarios will feature prominently in future interplanetary exploration: in situ production using locally available materials in lunar or planetary landings and high performance structural materials which carve out a set of properties for uniquely hostile space environments. To be competitive, high performance materials must typically offer orders of magnitude improvements in thermal conductivity or insulation, deliver high strength-to-weight ratios, or provide superior durability (low corrosion and/or ablative character, e.g., in heat shields). The space-related environmental parameters of high radiation flux, low weight, and superior reliability limits many typical aerospace materials to a short list comprising high performance alloys, nanocomposites and thin-layer metal laminates (Al-Cu, Al-Ag) with typical dimensions less than the Frank-Reed-type dislocation source. Extremely light weight carbon-carbon composites and carbon aerogels will be presented as novel examples which define broadened material parameters, particularly owing to their extreme thermal insulation (R-32-64) and low densities (<0.01 g/cu cm) approaching that of air itself. Even with these low-weight payload additions, rocket thrust limits and transport costs will always place a premium on assembling as much structural and life support resources upon interplanetary, lunar, or asteroid arrival. As an example, for in situ lunar glass manufacture, solar furnaces reaching 1700 C for pure silica glass manufacture in situ are compared with sol-gel technology and acid-leached ultrapure (<0.1% FeO) silica aerogel precursors.

Identification of Malicious Web Pages by Inductive Learning

NASA Astrophysics Data System (ADS)

Liu, Peishun; Wang, Xuefang

Malicious web pages are an increasing threat to current computer systems in recent years. Traditional anti-virus techniques focus typically on detection of the static signatures of Malware and are ineffective against these new threats because they cannot deal with zero-day attacks. In this paper, a novel classification method for detecting malicious web pages is presented. This method is generalization and specialization of attack pattern based on inductive learning, which can be used for updating and expanding knowledge database. The attack pattern is established from an example and generalized by inductive learning, which can be used to detect unknown attacks whose behavior is similar to the example.

Scientific Discovery through Citizen Science via Popular Amateur Astrophotography

NASA Astrophysics Data System (ADS)

Nemiroff, Robert J.; Bonnell, Jerry T.; Allen, Alice

2015-01-01

Can popular astrophotography stimulate real astronomical discovery? Perhaps surprisingly, in some cases, the answer is yes. Several examples are given using the Astronomy Picture of the Day (APOD) site as an example venue. One reason is angular -- popular wide and deep images sometimes complement professional images which typically span a more narrow field. Another reason is temporal -- an amateur is at the right place and time to take a unique and illuminating image. Additionally, popular venues can be informational -- alerting professionals to cutting-edge amateur astrophotography about which they might not have known previously. Methods of further encouraging this unusual brand of citizen science are considered.

The Pythagorean Roots of Introductory Physics

NASA Astrophysics Data System (ADS)

Clarage, James B.

2013-03-01

Much of the mathematical reasoning employed in the typical introductory physics course can be traced to Pythagorean roots planted over two thousand years ago. Besides obvious examples involving the Pythagorean theorem, I draw attention to standard physics problems and derivations which often unknowingly rely upon the Pythagoreans' work on proportion, music, geometry, harmony, the golden ratio, and cosmology. Examples are drawn from mechanics, electricity, sound, optics, energy conservation and relativity. An awareness of the primary sources of the mathematical techniques employed in the physics classroom could especially benefit students and educators at schools which encourage integration of their various courses in history, science, philosophy, and the arts.

Three Questions Can Change Your Labs for the Better

NASA Astrophysics Data System (ADS)

Blanton, Patricia

2009-04-01

Editor's note: This description gives those new to inquiry-style pedagogy an example as to how a typical introductory physics lab can be adapted for inquiry. I have never been able to find the author of this piece but share it here because it was posted to a listserv to be shared with physics teachers. If you are the author or know who wrote this, please let me know and I'll disclose it to our readers. My intent in publishing this is twofold: 1) to give beginning teachers an inquiry example, and 2) to encourage teachers to find an online community to share ideas and learn from experienced practitioners.

Artificial bias typically neglected in comparisons of uncertain atmospheric data

NASA Astrophysics Data System (ADS)

Pitkänen, Mikko R. A.; Mikkonen, Santtu; Lehtinen, Kari E. J.; Lipponen, Antti; Arola, Antti

2016-09-01

Publications in atmospheric sciences typically neglect biases caused by regression dilution (bias of the ordinary least squares line fitting) and regression to the mean (RTM) in comparisons of uncertain data. We use synthetic observations mimicking real atmospheric data to demonstrate how the biases arise from random data uncertainties of measurements, model output, or satellite retrieval products. Further, we provide examples of typical methods of data comparisons that have a tendency to pronounce the biases. The results show, that data uncertainties can significantly bias data comparisons due to regression dilution and RTM, a fact that is known in statistics but disregarded in atmospheric sciences. Thus, we argue that often these biases are widely regarded as measurement or modeling errors, for instance, while they in fact are artificial. It is essential that atmospheric and geoscience communities become aware of and consider these features in research.

What to do with a Dead Research Code

NASA Astrophysics Data System (ADS)

Nemiroff, Robert J.

2016-01-01

The project has ended -- should all of the computer codes that enabled the project be deleted? No. Like research papers, research codes typically carry valuable information past project end dates. Several possible end states to the life of research codes are reviewed. Historically, codes are typically left dormant on an increasingly obscure local disk directory until forgotten. These codes will likely become any or all of: lost, impossible to compile and run, difficult to decipher, and likely deleted when the code's proprietor moves on or dies. It is argued here, though, that it would be better for both code authors and astronomy generally if project codes were archived after use in some way. Archiving is advantageous for code authors because archived codes might increase the author's ADS citable publications, while astronomy as a science gains transparency and reproducibility. Paper-specific codes should be included in the publication of the journal papers they support, just like figures and tables. General codes that support multiple papers, possibly written by multiple authors, including their supporting websites, should be registered with a code registry such as the Astrophysics Source Code Library (ASCL). Codes developed on GitHub can be archived with a third party service such as, currently, BackHub. An important code version might be uploaded to a web archiving service like, currently, Zenodo or Figshare, so that this version receives a Digital Object Identifier (DOI), enabling it to found at a stable address into the future. Similar archiving services that are not DOI-dependent include perma.cc and the Internet Archive Wayback Machine at archive.org. Perhaps most simply, copies of important codes with lasting value might be kept on a cloud service like, for example, Google Drive, while activating Google's Inactive Account Manager.

Strengthening the weak link: Built Environment modelling for loss analysis

NASA Astrophysics Data System (ADS)

Millinship, I.

2012-04-01

Methods to analyse insured losses from a range of natural perils, including pricing by primary insurers and catastrophe modelling by reinsurers, typically lack sufficient exposure information. Understanding the hazard intensity in terms of spatial severity and frequency is only the first step towards quantifying the risk of a catastrophic event. For any given event we need to know: Are any structures affected? What type of buildings are they? How much damaged occurred? How much will the repairs cost? To achieve this, detailed exposure information is required to assess the likely damage and to effectively calculate the resultant loss. Modelling exposures in the Built Environment therefore plays as important a role in understanding re/insurance risk as characterising the physical hazard. Across both primary insurance books and aggregated reinsurance portfolios, the location of a property (a risk) and its monetary value is typically known. Exactly what that risk is in terms of detailed property descriptors including structure type and rebuild cost - and therefore its vulnerability to loss - is often omitted. This data deficiency is a primary source of variations between modelled losses and the actual claims value. Built Environment models are therefore required at a high resolution to describe building attributes that relate vulnerability to property damage. However, national-scale household-level datasets are often not computationally practical in catastrophe models and data must be aggregated. In order to provide more accurate risk analysis, we have developed and applied a methodology for Built Environment modelling for incorporation into a range of re/insurance applications, including operational models for different international regions and different perils and covering residential, commercial and industry exposures. Illustrated examples are presented, including exposure modelling suitable for aggregated reinsurance analysis for the UK and bespoke high resolution modelling for industrial sites in Germany. A range of attributes are included following detailed claims analysis and engineering research with property type, age and condition identified as important differentiators of damage from flood, wind and freeze events.