Disorders of representation and control in semantic cognition: Effects of familiarity, typicality, and specificity

PubMed Central

Rogers, Timothy T.; Patterson, Karalyn; Jefferies, Elizabeth; Lambon Ralph, Matthew A.

2015-01-01

We present a case-series comparison of patients with cross-modal semantic impairments consequent on either (a) bilateral anterior temporal lobe atrophy in semantic dementia (SD) or (b) left-hemisphere fronto-parietal and/or posterior temporal stroke in semantic aphasia (SA). Both groups were assessed on a new test battery designed to measure how performance is influenced by concept familiarity, typicality and specificity. In line with previous findings, performance in SD was strongly modulated by all of these factors, with better performance for more familiar items (regardless of typicality), for more typical items (regardless of familiarity) and for tasks that did not require very specific classification, consistent with the gradual degradation of conceptual knowledge in SD. The SA group showed significant impairments on all tasks but their sensitivity to familiarity, typicality and specificity was more variable and governed by task-specific effects of these factors on controlled semantic processing. The results are discussed with reference to theories about the complementary roles of representation and manipulation of semantic knowledge. PMID:25934635

Late erythropoietin for preventing red blood cell transfusion in preterm and/or low birth weight infants.

PubMed

Aher, Sanjay M; Ohlsson, Arne

2012-09-12

Low plasma levels of erythropoietin (EPO) in preterm infants provide a rationale for the use of EPO to prevent or treat anaemia. To assess the effectiveness and safety of late initiation of EPO (initiated at eight days after birth or later) in reducing the use of red blood cell (RBC) transfusions in preterm and/or low birth weight infants. For this update MEDLINE, EMBASE, CINAHL, and The Cochrane Library were searched in March 2012. Additional searches included the Pediatric Academic Societies Annual Meetings from 2000 to 2012 (Abstracts2 View(TM)) and clinical trials registries (clinicaltrials.gov; controlled-trials.com; and who.int/ictrp). Randomised or quasi-randomised controlled trials of late initiation of EPO treatment (started at ≥ eight days of age) versus placebo or no intervention in preterm (< 37 weeks) and/or low birth weight (< 2500 g) neonates. Data collection and analyses were performed in accordance with the methods of the Cochrane Neonatal Review Group. In this 2012 update one new study for inclusion was identified. Twenty-eight studies enrolling 1361 preterm infants in 21 countries were included. Most trials were of small sample size. The meta-analysis showed a significant effect on the use of one or more RBC transfusions [typical risk ratio (RR); 0.66 (95% confidence interval (CI); 0.59 to 0.74); typical risk difference (RD) -0.21 (95% CI; -0.26 to -0.16); typical number needed to benefit (NNTB) of 5 (95% CI 4 to 6) 19 studies, 912 infants]. There was moderate heterogeneity for this outcome [for RR (P < 0.00001; I(2) = 74.0%); for RD (P = 0.0006; I(2) = 58.9%)]. Similar results were obtained in secondary analyses based on different combinations of high/low doses of EPO and iron supplementation. In this update there was no significant reduction in the total volume (mL/kg) of blood transfused per infant [typical MD -1.61mL/kg (95% CI -5.78 to 2.57); 5 studies, 197 infants] There was high heterogeneity for this outcome (P = 0.00001, I(2) = 92%). There was a significant reduction in the number of transfusions per infant (nine studies enrolling 567 infants); [typical MD -0.78 (-0.97 to -0.59)]. Three studies including 331 patients reported on retinopathy of prematurity (ROP) (all stages), with a typical RR 0.79 (95% CI 0.57 to 1.10) and a typical RD of -0.05 (95% CI -0.13 to 0.02). This outcome was not statistically significantly different between the groups. There was no heterogeneity for this outcome for either RR (P = 0.41; I(2) = 0%) or RD (P = 0.43; I(2) = 0%). Two trials enrolling 212 patients reported on severe ROP (stage 3 or greater). The typical RR was 0.83 (95% CI 0.23 to 2.98) and the typical RD was -0.01 (95% CI -0.06 to 0.05); neither were statistically significant. There was no heterogeneity for this outcome for either RR (P = 0.29; I(2) = 9.3%) or RD (P = 0.36; I(2) = 0%).There were no significant differences in other clinical outcomes. Long-term neurodevelopmental outcomes were not reported. Late administration of EPO reduces the use of one or more RBC transfusions, the number of RBC transfusions per infant but not the total volume of RBCs transfused per infant. Any donor exposure is likely not avoided as most studies included infants who had received RBC transfusions prior to trial entry. Late EPO does not significantly reduce or increase any clinically important adverse outcomes. Further research of the use of late EPO treatment to prevent donor exposure is not indicated. Research efforts should focus on limiting donor exposure during the first few days of life in sick neonates, when RBC requirements are most likely to be required and cannot be prevented by late EPO treatment.

Comparison of confinement in resistive-shell reversed-field pinch devices with two different magnetic shell penetration times

NASA Astrophysics Data System (ADS)

Gravestijn, R. M.; Drake, J. R.; Hedqvist, A.; Rachlew, E.

2004-01-01

A loop voltage is required to sustain the reversed-field pinch (RFP) equilibrium. The configuration is characterized by redistribution of magnetic helicity but with the condition that the total helicity is maintained constant. The magnetic field shell penetration time, tgrs, has a critical role in the stability and performance of the RFP. Confinement in the EXTRAP device has been studied with two values of tgrs, first (EXTRAP-T2) with tgrs of the order of the typical relaxation cycle timescale and then (EXTRAP-T2R) with tgrs much longer than the relaxation cycle timescale, but still much shorter than the pulse length. Plasma parameters show significant improvements in confinement in EXTRAP-T2R. The typical loop voltage required to sustain comparable electron poloidal beta values is a factor of 3 lower in the EXTRAP-T2R device. The improvement is attributed to reduced magnetic turbulence.

NASA Workshop on Solar-Terrestrial Studies from a Manned Space Station

NASA Technical Reports Server (NTRS)

1977-01-01

The mechanism of the solar radiation and its effect on the environment are discussed. These interdisciplinary discussions were expected to expose typical instrumentation requirements in the exploration of the solar and terrestrial system in such manner as to make it a significant factor in the proper management of the use of the earth's limited resources.

Lenz's Law Demonstration Using an Ultrasound Position Sensor

ERIC Educational Resources Information Center

Fodor, Petru S.; Peppard, Tara

2012-01-01

One of the very popular demonstrations used in introductory physics courses to illustrate Lenz's law is the "slowly falling magnet." In its simplest version it requires only a powerful cylindrical magnet and a metal tube, typically of copper or aluminum. When dropped in the tube the magnet takes significantly longer to reach the other end than a…

An aspect-oriented approach for designing safety-critical systems

NASA Astrophysics Data System (ADS)

Petrov, Z.; Zaykov, P. G.; Cardoso, J. P.; Coutinho, J. G. F.; Diniz, P. C.; Luk, W.

The development of avionics systems is typically a tedious and cumbersome process. In addition to the required functions, developers must consider various and often conflicting non-functional requirements such as safety, performance, and energy efficiency. Certainly, an integrated approach with a seamless design flow that is capable of requirements modelling and supporting refinement down to an actual implementation in a traceable way, may lead to a significant acceleration of development cycles. This paper presents an aspect-oriented approach supported by a tool chain that deals with functional and non-functional requirements in an integrated manner. It also discusses how the approach can be applied to development of safety-critical systems and provides experimental results.

Implications of Decreased Nitrite Concentrations on Clostridium perfringens Outgrowth during Cooling of Ready-to-Eat Meats.

PubMed

Myers, Megan I; Sebranek, Joseph G; Dickson, James S; Shaw, Angela M; Tarté, Rodrigo; Adams, Kristin R; Neibuhr, Steve

2016-01-01

Increased popularity of natural and organic processed meats can be attributed to the growing consumer demand for preservative-free foods, including processed meats. To meet this consumer demand, meat processors have begun using celery juice concentrate in place of sodium nitrite to create products labeled as no-nitrate or no-nitrite-added meat products while maintaining the characteristics unique to conventionally cured processed meats. Because of flavor limitations, natural cures with celery concentrate typically provide lower ingoing nitrite concentrations for ready-to-eat processed meats than do conventional cures, which could allow for increased growth of pathogens, such as Clostridium perfringens, during cooked product cooling such as that required by the U.S. Department of Agriculture. The objective of this study was to investigate the implications associated with reduced nitrite concentrations for preventing C. perfringens outgrowth during a typical cooling cycle used for cooked products. Nitrite treatments of 0, 50, and 100 ppm were tested in a broth system inoculated with a three-strain C. perfringens cocktail and heated with a simulated product thermal process followed by a typical cooling-stabilization process. The nitrite concentration of 50 ppm was more effective for preventing C. perfringens outgrowth than was 0 ppm but was not as effective as 100 ppm. The interaction between nitrite and temperature significantly affected (P < 0.05) C. perfringens outgrowth in both total population and number of vegetative cells. Both temperature and nitrite concentration significantly affected (P < 0.05) C. perfringens spore survival, but the interaction between nitrite and temperature did not have a significant effect (P > 0.05) on spore outgrowth. Results indicate that decreased nitrite concentrations (50 ppm) have increased potential for total C. perfringens population outgrowth during cooling and may require additional protective measures, such as faster chilling rates.

Narrative comprehension in 4-7-year-old children with autism: testing the Weak Central Coherence account.

PubMed

Nuske, Heather Joy; Bavin, Edith L

2011-01-01

Despite somewhat spared structural language development in high-functioning autism, communicative comprehension deficits persist. Comprehension involves the integration of meaning: global processing is required. The Weak Central Coherence theory suggests that individuals with autism are biased to process information locally. This cognitive style may impair comprehension, particularly if inferencing is required. However, task performance may be facilitated by this cognitive style if local processing is required. The current study was designed to examine the extent to which the 'weak central coherence' cognitive style affects comprehension and inferential processing of spoken narratives. The children with autism were expected to perform comparatively poorer on inferences relating to event scripts and comparatively better on inferences requiring deductive reasoning. Fourteen high-functioning children with autism were recruited from databases of various autism organizations (mean age = 6:7, 13 males, one female) and were matched on a receptive vocabulary and a picture-completion task with 14 typically developing children recruited from a local childcare centre (mean age = 4:10, seven males, seven females). The children were read short stories and asked questions about the stories. Results indicated that the children with autism were less able to make inferences based on event scripts, but the groups did not differ significantly on inferences requiring deductive logical reasoning. Despite similar group performance on questions relating to the main idea of the stories, only for the typically developing group was good performance on extracting the main idea of the narratives significantly correlated with performance on all other comprehension tasks. Findings provide some support for the Weak Central Coherence theory and demonstrate that young children with autism do not spontaneously integrate information in order to make script inferences, as do typically developing children. These findings may help to explain communicative problems of young children with autism and can be applied to intervention programme development. More research on the link between a 'weak central coherence' cognitive style and communicative comprehension in autism will be valuable in understanding the comprehension deficits associated with autism. © 2010 Royal College of Speech & Language Therapists.

Age-Related Brain Activation Changes during Rule Repetition in Word-Matching.

PubMed

Methqal, Ikram; Pinsard, Basile; Amiri, Mahnoush; Wilson, Maximiliano A; Monchi, Oury; Provost, Jean-Sebastien; Joanette, Yves

2017-01-01

Objective: The purpose of this study was to explore the age-related brain activation changes during a word-matching semantic-category-based task, which required either repeating or changing a semantic rule to be applied. In order to do so, a word-semantic rule-based task was adapted from the Wisconsin Sorting Card Test, involving the repeated feedback-driven selection of given pairs of words based on semantic category-based criteria. Method: Forty healthy adults (20 younger and 20 older) performed a word-matching task while undergoing a fMRI scan in which they were required to pair a target word with another word from a group of three words. The required pairing is based on three word-pair semantic rules which correspond to different levels of semantic control demands: functional relatedness, moderately typical-relatedness (which were considered as low control demands), and atypical-relatedness (high control demands). The sorting period consisted of a continuous execution of the same sorting rule and an inferred trial-by-trial feedback was given. Results: Behavioral performance revealed increases in response times and decreases of correct responses according to the level of semantic control demands (functional vs. typical vs. atypical) for both age groups (younger and older) reflecting graded differences in the repetition of the application of a given semantic rule. Neuroimaging findings of significant brain activation showed two main results: (1) Greater task-related activation changes for the repetition of the application of atypical rules relative to typical and functional rules, and (2) Changes (older > younger) in the inferior prefrontal regions for functional rules and more extensive and bilateral activations for typical and atypical rules. Regarding the inter-semantic rules comparison, only task-related activation differences were observed for functional > typical (e.g., inferior parietal and temporal regions bilaterally) and atypical > typical (e.g., prefrontal, inferior parietal, posterior temporal, and subcortical regions). Conclusion: These results suggest that healthy cognitive aging relies on the adaptive changes of inferior prefrontal resources involved in the repetitive execution of semantic rules, thus reflecting graded differences in support of task demands.

[Modern foreign car safety systems and their forensic-medical significance].

PubMed

Iakunin, S A

2007-01-01

The author gives a characteristic of active and passive security systems installed in cars of foreign production. These security systems significantly modify the classic car trauma character decreasing frequency of occurrence and dimensions of specific and typical injuries. A new approach based on the theory of probability to estimate these injuries is required. The most common active and passive security systems are described in the article; their principles of operation and influence on the trauma character are estimated.

The Components of Working Memory Updating: An Experimental Decomposition and Individual Differences

ERIC Educational Resources Information Center

Ecker, Ullrich K. H.; Lewandowsky, Stephan; Oberauer, Klaus; Chee, Abby E. H.

2010-01-01

Working memory updating (WMU) has been identified as a cognitive function of prime importance for everyday tasks and has also been found to be a significant predictor of higher mental abilities. Yet, little is known about the constituent processes of WMU. We suggest that operations required in a typical WMU task can be decomposed into 3 major…

24 CFR 972.127 - Standards for determining whether a property is viable in the long term.

Code of Federal Regulations, 2010 CFR

2010-04-01

... must not exceed the Section 8 cost under the method contained in the Appendix to this part, even if the... housing in the community (typically family). (c) A greater income mix can be achieved. (1) Measures generally will be required to broaden the range of resident incomes over time to include a significant mix...

Computational efficiency improvements for image colorization

NASA Astrophysics Data System (ADS)

Yu, Chao; Sharma, Gaurav; Aly, Hussein

2013-03-01

We propose an efficient algorithm for colorization of greyscale images. As in prior work, colorization is posed as an optimization problem: a user specifies the color for a few scribbles drawn on the greyscale image and the color image is obtained by propagating color information from the scribbles to surrounding regions, while maximizing the local smoothness of colors. In this formulation, colorization is obtained by solving a large sparse linear system, which normally requires substantial computation and memory resources. Our algorithm improves the computational performance through three innovations over prior colorization implementations. First, the linear system is solved iteratively without explicitly constructing the sparse matrix, which significantly reduces the required memory. Second, we formulate each iteration in terms of integral images obtained by dynamic programming, reducing repetitive computation. Third, we use a coarseto- fine framework, where a lower resolution subsampled image is first colorized and this low resolution color image is upsampled to initialize the colorization process for the fine level. The improvements we develop provide significant speedup and memory savings compared to the conventional approach of solving the linear system directly using off-the-shelf sparse solvers, and allow us to colorize images with typical sizes encountered in realistic applications on typical commodity computing platforms.

Learning community health nursing concepts from clinical experience.

PubMed

Lasater, Kathie; Luce, Linda; Volpin, Miriam; Terwilliger, Allison; Wild, Jackson

2007-01-01

Clinical faculty often struggle to design competency demonstrations that promote quality learning experiences. A nursing program in Oregon combined mental health and community health nursing practica and required well-planned, integrated competency demonstrations. This requirement became the impetus for students to promote the health of clients and learn clinical concepts that are difficult to experience in a typical term. Faculty coached students to make a significant contribution that would last beyond their clinical practica. A case study in competency demonstration design is described, and implications for curriculum development are presented.

Rights of Conscience Protections for Armed Forces Service Members and Their Chaplains

DTIC Science & Technology

2015-07-22

established five categories of religious accommodation requests: dietary, grooming, medical , uniform, and worship practices.2 • Dietary: typically, these... Medical : typically, these are requests for a waiver of mandatory immunizations. • Uniform: typically, these are requests to wear religious jewelry or...service members in their units. Requirements A chaplain applicant is required to meet DoD medical and physical standards for commissioning as an

Recombination Catalysts for Hypersonic Fuels

NASA Technical Reports Server (NTRS)

Chinitz, W.

1998-01-01

The goal of commercially-viable access to space will require technologies that reduce propulsion system weight and complexity, while extracting maximum energy from the products of combustion. This work is directed toward developing effective nozzle recombination catalysts for the supersonic and hypersonic aeropropulsion engines used to provide such access to space. Effective nozzle recombination will significantly reduce rk=le length (hence, propulsion system weight) and reduce fuel requirements, further decreasing the vehicle's gross lift-off weight. Two such catalysts have been identified in this work, barium and antimony compounds, by developing chemical kinetic reaction mechanisms for these materials and determining the engine performance enhancement for a typical flight trajectory. Significant performance improvements are indicated, using only 2% (mole or mass) of these compounds in the combustor product gas.

Dietary guidelines in the Czech Republic. II.: Nutritional profiles of food groups.

PubMed

Brázdová, Z; Fiala, J; Bauerová, J; Mullerová, D

2000-11-01

Modern dietary guidelines set in terms of food groups are easy to use and understand for target populations, but rather complicated from the point of view of quantification, i.e. the correctly set number of recommended servings in different population groups according to age, sex, physical activity and physiological status on the basis of required intake of energy and individual nutrients. It is the use of abstract comprehensive food groups that makes it impossible to use a simple database of food tables based on the content of nutrients in individual foods, rather than their groups. Using groups requires that their nutritional profiles be established, i.e. that an average content of nutrients and energy for individual groups be calculated. To calculate nutritional profiles for Czech dietary guidelines, the authors used three different methods: (1) Simple profiles, with all commodities with significant representation in the Czech food basket represented in equal amounts. (2) Profiles based on typical servings, with the same commodities as in (1) but in characteristic intake quantities (typical servings). (3) Food basket-based profiles with commodities constituting the Czech food basket in quantities identical for that basket. The results showed significant differences in profiles calculated by different methods. Calculated nutrient intakes were particularly influenced by the size of typical servings and it is therefore essential that a realistic size of servings be used in calculations. The consistent use of recommended food items throughout all food groups and subgroups is very important. The number of servings of foods from the five food groups is not enough if a suitable food item is not chosen within individual groups. On the basis of their findings, the authors fully recommend the use of nutritional profiles based on typical servings that give a realistic idea of the probable energy and nutrient content in the recommended daily intake. In view of regional cultural differences, national nutritional profiles play a vital importance. Population studies investigating the size of the typical servings and the most frequently occurring commodities in the food basket should be made every three years. Nutritional profiles designed in this way constitute an important starting point for setting national dietary guidelines, their implementation and revisions.

Concave Surround Optics for Rapid Multi-View Imaging

DTIC Science & Technology

2006-11-01

thus is amenable to capturing dynamic events avoiding the need to construct and calibrate an array of cameras. We demonstrate the system with a high...hard to assemble and calibrate . In this paper we present an optical system capable of rapidly moving the viewpoint around a scene. Our system...flexibility, large camera arrays are typically expensive and require significant effort to calibrate temporally, geometrically and chromatically

The Impact of Organizational Innovations in Nursing Homes on Staff Perceptions: A Secondary Data Analysis.

PubMed

Adams, Joost; Verbeek, Hilde; Zwakhalen, Sandra M G

2017-01-01

The shift in nursing home care for patients with dementia from traditional task-driven environments towards patient-centered small-scale environments has implications for nursing practice. Information about its implications for nursing staff is lacking, and only a few studies have addressed staff perceptions. We sought to explore staff perceptions of required skills and to determine differences in job satisfaction, motivation, and job characteristics of staff working in both care settings. A secondary data analysis was conducted. The data source used was drawn from a larger study testing the effects of small-scale living (Verbeek et al., 2009). Nursing staff working on a permanent basis and who were directly involved in care were eligible to participate in the study. Data on job satisfaction, motivation, and job characteristics of nursing staff working in typical small-scale and traditional care environments were derived using a questionnaire. Data were analyzed using descriptive statistics. Differences between nursing staff job satisfaction, motivation, and job characteristics were tested using multilinear regression analysis. In total, 138 staff members were included (81 staff members working in traditional nursing home wards and 57 staff members working in small-scale nursing home wards). The findings showed that in typical small-scale nursing homes, job satisfaction and job motivation were significantly higher compared to those in typical traditional nursing homes. Job autonomy and social support were also significantly higher, while job demands were significantly lower in these small-scale nursing homes. Social support was found to be the most significant predictor of job motivation and job satisfaction in both types of typical nursing homes. Nursing staff working in traditional care environments more often expressed the intention to switch to small-scale environments. Based on the findings of this study, it can be concluded that nursing homes environments differ substantially in experienced job satisfaction and job motivation. To enable a balanced work environment for nursing staff, a clear understanding of the relation between living environments and experienced job satisfaction among nursing staff is required. Since social support seems to be one of the key contributors to a supportive beneficial work climate, managers should focus on enabling this in daily nursing home care. © 2016 Sigma Theta Tau International.

Thermal Remote Sensing with Uav-Based Workflows

NASA Astrophysics Data System (ADS)

Boesch, R.

2017-08-01

Climate change will have a significant influence on vegetation health and growth. Predictions of higher mean summer temperatures and prolonged summer draughts may pose a threat to agriculture areas and forest canopies. Rising canopy temperatures can be an indicator of plant stress because of the closure of stomata and a decrease in the transpiration rate. Thermal cameras are available for decades, but still often used for single image analysis, only in oblique view manner or with visual evaluations of video sequences. Therefore remote sensing using a thermal camera can be an important data source to understand transpiration processes. Photogrammetric workflows allow to process thermal images similar to RGB data. But low spatial resolution of thermal cameras, significant optical distortion and typically low contrast require an adapted workflow. Temperature distribution in forest canopies is typically completely unknown and less distinct than for urban or industrial areas, where metal constructions and surfaces yield high contrast and sharp edge information. The aim of this paper is to investigate the influence of interior camera orientation, tie point matching and ground control points on the resulting accuracy of bundle adjustment and dense cloud generation with a typically used photogrammetric workflow for UAVbased thermal imagery in natural environments.

Power and Performance Trade-offs for Space Time Adaptive Processing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gawande, Nitin A.; Manzano Franco, Joseph B.; Tumeo, Antonino

Computational efficiency – performance relative to power or energy – is one of the most important concerns when designing RADAR processing systems. This paper analyzes power and performance trade-offs for a typical Space Time Adaptive Processing (STAP) application. We study STAP implementations for CUDA and OpenMP on two computationally efficient architectures, Intel Haswell Core I7-4770TE and NVIDIA Kayla with a GK208 GPU. We analyze the power and performance of STAP’s computationally intensive kernels across the two hardware testbeds. We also show the impact and trade-offs of GPU optimization techniques. We show that data parallelism can be exploited for efficient implementationmore » on the Haswell CPU architecture. The GPU architecture is able to process large size data sets without increase in power requirement. The use of shared memory has a significant impact on the power requirement for the GPU. A balance between the use of shared memory and main memory access leads to an improved performance in a typical STAP application.« less

Spacelab mission dependent training parametric resource requirements study

NASA Technical Reports Server (NTRS)

Ogden, D. H.; Watters, H.; Steadman, J.; Conrad, L.

1976-01-01

Training flows were developed for typical missions, resource relationships analyzed, and scheduling optimization algorithms defined. Parametric analyses were performed to study the effect of potential changes in mission model, mission complexity and training time required on the resource quantities required to support training of payload or mission specialists. Typical results of these analyses are presented both in graphic and tabular form.

Strategic Adaptation of SCA for STRS

NASA Technical Reports Server (NTRS)

Quinn, Todd; Kacpura, Thomas

2007-01-01

The Space Telecommunication Radio System (STRS) architecture is being developed to provide a standard framework for future NASA space radios with greater degrees of interoperability and flexibility to meet new mission requirements. The space environment imposes unique operational requirements with restrictive size, weight, and power constraints that are significantly smaller than terrestrial-based military communication systems. With the harsh radiation environment of space, the computing and processing resources are typically one or two generations behind current terrestrial technologies. Despite these differences, there are elements of the SCA that can be adapted to facilitate the design and implementation of the STRS architecture.

Modeling Security Aspects of Network

NASA Astrophysics Data System (ADS)

Schoch, Elmar

With more and more widespread usage of computer systems and networks, dependability becomes a paramount requirement. Dependability typically denotes tolerance or protection against all kinds of failures, errors and faults. Sources of failures can basically be accidental, e.g., in case of hardware errors or software bugs, or intentional due to some kind of malicious behavior. These intentional, malicious actions are subject of security. A more complete overview on the relations between dependability and security can be found in [31]. In parallel to the increased use of technology, misuse also has grown significantly, requiring measures to deal with it.

Hydrocode simulations of air and water shocks for facility vulnerability assessments.

PubMed

Clutter, J Keith; Stahl, Michael

2004-01-02

Hydrocodes are widely used in the study of explosive systems but their use in routine facility vulnerability assessments has been limited due to the computational resources typically required. These requirements are due to the fact that the majority of hydrocodes have been developed primarily for the simulation of weapon-scale phenomena. It is not practical to use these same numerical frameworks on the large domains found in facility vulnerability studies. Here, a hydrocode formulated specifically for facility vulnerability assessments is reviewed. Techniques used to accurately represent the explosive source while maintaining computational efficiency are described. Submodels for addressing other issues found in typical terrorist attack scenarios are presented. In terrorist attack scenarios, loads produced by shocks play an important role in vulnerability. Due to the difference in the material properties of water and air and interface phenomena, there exists significant contrast in wave propagation phenomena in these two medium. These physical variations also require special attention be paid to the mathematical and numerical models used in the hydrocodes. Simulations for a variety of air and water shock scenarios are presented to validate the computational models used in the hydrocode and highlight the phenomenological issues.

JOVIAL (J73) to Ada Translator.

DTIC Science & Technology

1982-06-01

editors, file managers , and other APSE , the Translator will Provide significant (though not total) Ltion of the conversion of J73 Proorams for use...vlobal knowlede only of compool declarationsi externals are not resolved until the compiled modules are linked. Creatinv a vlobal data base durin...translation (as shown in Figure 2-1) will require the Job control, file management , and text editing capabilities which are provided by a typical

The Next Technology Revolution - Nano Electronic Technology

NASA Astrophysics Data System (ADS)

Turlik, Iwona

2004-03-01

Nanotechnology is a revolutionary engine that will engender enormous changes in a vast majority of today's industries and markets, while potentially creating whole new industries. The impact of nanotechnology is particularly significant in the electronics industry, which is constantly driven by the need for higher performance, increased functionality, smaller size and lower cost. Nanotechnology can influence many of the hundreds of components that are typically assembled to manufacture modern electronic devices. Motorola manufactures electronics for a wide range of industries and communication products. In this presentation, the typical components of a cellular phone are outlined and technology requirements for future products, the customer benefits, and the potential impact of nanotechnology on many of the components are discussed. Technology needs include reliable materials supply, processes for high volume production, experimental and simulation tools, etc. For example, even routine procedures such as failure characterization may require the development of new tools for investigating nano-scale phenomena. Business needs include the development of an effective, high volume supply chain for nano-materials and devices, disruptive product platforms, and visible performance impact on the end consumer. An equally significant long-term industry need is the availability of science and engineering graduates with a multidisciplinary focus and a deep understanding of the fundamentals of nano-technology, that can harness the technology to create revolutionary products.

Everyday social and conversation applications of theory-of-mind understanding by children with autism-spectrum disorders or typical development.

PubMed

Peterson, Candida C; Garnett, Michelle; Kelly, Adrian; Attwood, Tony

2009-02-01

Children with autism-spectrum disorders (ASD) often fail laboratory false-belief tests of theory of mind (ToM). Yet how this impacts on their everyday social behavior is less clear, partly owing to uncertainty over which specific everyday conversational and social skills require ToM understanding. A new caregiver-report scale of these everyday applications of ToM was developed and validated in two studies. Study 1 obtained parent ratings of 339 children (85 with autism; 230 with Asperger's; 24 typically-developing) on the new scale and results revealed (a) that the scale had good psychometric properties and (b) that children with ASD had significantly more everyday mindreading difficulties than typical developers. In Study 2, we directly tested links between laboratory ToM and everyday mindreading using teacher ratings on the new scale. The sample of 25 children included 15 with autism and 10 typical developers aged 5-12 years. Children in both groups who passed laboratory ToM tests had fewer everyday mindreading difficulties than those of the same diagnosis who failed. Yet, intriguingly, autistic ToM-passers still had more problems with everyday mindreading than younger typically-developing ToM-failers. The possible roles of family conversation and peer interaction, along with ToM, in everyday social functioning were considered.

Intra-individual cognitive imbalance in ASD between perceptual reasoning and ambiguity-solving related to tool use: Comparison among children exhibiting ASD, AD/HD, and typical development.

PubMed

Wakusawa, Keisuke; Nara, Chieko; Kubota, Yuki; Tomizawa, Yayoi; Taki, Yasuyuki; Sassa, Yuko; Kobayashi, Satoru; Suzuki-Muromoto, Sato; Hirose, Mieko; Yokoyama, Hiroyuki; Nara, Takahiro; Kure, Shigeo; Mori, Norio; Takei, Noriyoshi; Kawashima, Ryuta

2018-01-01

Several studies have suggested that objective deficits in the processing of abstract information in conjunction with an enhanced ability to process concrete information is a definitive characteristic of autism spectrum disorder (ASD). However, this cognitive imbalance is not necessarily clear in high-functioning autistic individuals who do not display absolute differences relative to typically developing (TD) populations. Thus, the purpose of this study was to identify this cognitive tendency in high-functioning autistic individuals using intra-individual cognitive comparisons. The reaction times (RTs) of TD children, children with ASD, and children with attention deficit hyperactivity disorder (AD/HD) (n=17 in each group, mean age=11.9years, age range=9.8-15.8years) were compared using the Which/How-to-Apply Tools (W/HAT) test, which consists of tasks requiring the adaptive use of novel tools and familiar tools in atypical and typical situations. Differences in RTs between the atypical and typical trials ([A-T]) were used to assess intra-individual cognitive imbalances. As predicted, the [A-T] scores of the ASD group were significantly higher than those of the TD group even though the RTs in the atypical and typical trials did not differ. Additionally, the [A-T] values were significantly higher in the ASD group than in the AD/HD group, which indicates that the cognitive imbalance was specific to ASD individuals. No significant interaction was detected between the trial and subject group. The findings of this study demonstrate that a cognitive imbalance in ASD individuals may enhance the current understanding of the pathophysiology of this disorder, which is found in a range of individuals, including those with obvious cortical dysfunction to those with only intra-individual imbalances. Copyright © 2017 The Japanese Society of Child Neurology. Published by Elsevier B.V. All rights reserved.

Motor and gestural performance in children with autism spectrum disorders, developmental coordination disorder, and/or attention deficit hyperactivity disorder.

PubMed

Dewey, Deborah; Cantell, Marja; Crawford, Susan G

2007-03-01

Motor and gestural skills of children with autism spectrum disorders (ASD), developmental coordination disorder (DCD), and/or attention deficit hyperactivity disorder (ADHD) were investigated. A total of 49 children with ASD, 46 children with DCD, 38 children with DCD+ADHD, 27 children with ADHD, and 78 typically developing control children participated. Motor skills were assessed with the Bruininks-Oseretsky Test of Motor Proficiency Short Form, and gestural skills were assessed using a test that required children to produce meaningful gestures to command and imitation. Children with ASD, DCD, and DCD+ADHD were significantly impaired on motor coordination skills; however, only children with ASD showed a generalized impairment in gestural performance. Examination of types of gestural errors revealed that children with ASD made significantly more incorrect action and orientation errors to command, and significantly more orientation and distortion errors to imitation than children with DCD, DCD+ADHD, ADHD, and typically developing control children. These findings suggest that gestural impairments displayed by the children with ASD were not solely attributable to deficits in motor coordination skills.

Application of Semi Active Control Techniques to the Damping Suppression Problem of Solar Sail Booms

NASA Technical Reports Server (NTRS)

Adetona, O.; Keel, L. H.; Whorton, M. S.

2007-01-01

Solar sails provide a propellant free form for space propulsion. These are large flat surfaces that generate thrust when they are impacted by light. When attached to a space vehicle, the thrust generated can propel the space vehicle to great distances at significant speeds. For optimal performance the sail must be kept from excessive vibration. Active control techniques can provide the best performance. However, they require an external power-source that may create significant parasitic mass to the solar sail. However, solar sails require low mass for optimal performance. Secondly, active control techniques typically require a good system model to ensure stability and performance. However, the accuracy of solar sail models validated on earth for a space environment is questionable. An alternative approach is passive vibration techniques. These do not require an external power supply, and do not destabilize the system. A third alternative is referred to as semi-active control. This approach tries to get the best of both active and passive control, while avoiding their pitfalls. In semi-active control, an active control law is designed for the system, and passive control techniques are used to implement it. As a result, no external power supply is needed so the system is not destabilize-able. Though it typically underperforms active control techniques, it has been shown to out-perform passive control approaches and can be unobtrusively installed on a solar sail boom. Motivated by this, the objective of this research is to study the suitability of a Piezoelectric (PZT) patch actuator/sensor based semi-active control system for the vibration suppression problem of solar sail booms. Accordingly, we develop a suitable mathematical and computer model for such studies and demonstrate the capabilities of the proposed approach with computer simulations.

Cognitive outcomes in pediatric heart transplant recipients bridged to transplantation with ventricular assist devices.

PubMed

Stein, Mary Lynette; Bruno, Jennifer L; Konopacki, Kelly L; Kesler, Shelli; Reinhartz, Olaf; Rosenthal, David

2013-02-01

Ventricular assist devices (VADs) have been associated with high rates of neurologic injury in pediatric patients during the period of support, but the delayed consequences of this type of injury have not been described in the literature. In this study we assess cognitive outcomes with indices of general intellectual functioning, including working memory, processing speed, perceptual reasoning and verbal comprehension, for pediatric heart transplant recipients who required VAD support as a bridge to transplant (n = 9). We present an aggregate of these VAD patients combined with heart transplant recipients who did not require mechanical circulatory support (n = 11), and compare the performance of all transplant patients (n = 20) to typically developing, healthy comparators (n = 12). We also present a post hoc analysis of those transplant recipients with significant medical morbidity in the first year of life, referred to as the "high-risk" transplant group (n = 5), and compare them with the "low-risk" transplant group (n = 15) and the typically developing comparators (n = 12). The mean performance of the VAD patients was in the average range for each of the examined indices of cognitive functioning. A total of 11% of the VAD patients performed in the impaired range and 78% performed in the average range, with 11% in the superior range on measures of general intellectual functioning. The typically developing participants performed significantly better than the aggregated transplant recipients on all indices except verbal comprehension. Lower cognitive performance in the combined transplant group appears to be associated with medical morbidity in the first year of life. Despite significant neurologic risk factors, this cohort of pediatric patients who were bridged to transplant with VAD demonstrated resiliency in terms of cognitive outcomes. In this heterogeneous population, it is likely that multiple factors contributed to the cognitive outcomes. As VAD use becomes more common in pediatric patients, a prospective evaluation of cognitive outcomes is warranted. Copyright © 2013 International Society for Heart and Lung Transplantation. Published by Elsevier Inc. All rights reserved.

A puzzle form of a non-verbal intelligence test gives significantly higher performance measures in children with severe intellectual disability

PubMed Central

Bello, Katrina D; Goharpey, Nahal; Crewther, Sheila G; Crewther, David P

2008-01-01

Background Assessment of 'potential intellectual ability' of children with severe intellectual disability (ID) is limited, as current tests designed for normal children do not maintain their interest. Thus a manual puzzle version of the Raven's Coloured Progressive Matrices (RCPM) was devised to appeal to the attentional and sensory preferences and language limitations of children with ID. It was hypothesized that performance on the book and manual puzzle forms would not differ for typically developing children but that children with ID would perform better on the puzzle form. Methods The first study assessed the validity of this puzzle form of the RCPM for 76 typically developing children in a test-retest crossover design, with a 3 week interval between tests. A second study tested performance and completion rate for the puzzle form compared to the book form in a sample of 164 children with ID. Results In the first study, no significant difference was found between performance on the puzzle and book forms in typically developing children, irrespective of the order of completion. The second study demonstrated a significantly higher performance and completion rate for the puzzle form compared to the book form in the ID population. Conclusion Similar performance on book and puzzle forms of the RCPM by typically developing children suggests that both forms measure the same construct. These findings suggest that the puzzle form does not require greater cognitive ability but demands sensory-motor attention and limits distraction in children with severe ID. Thus, we suggest the puzzle form of the RCPM is a more reliable measure of the non-verbal mentation of children with severe ID than the book form. PMID:18671882

A puzzle form of a non-verbal intelligence test gives significantly higher performance measures in children with severe intellectual disability.

PubMed

Bello, Katrina D; Goharpey, Nahal; Crewther, Sheila G; Crewther, David P

2008-08-01

Assessment of 'potential intellectual ability' of children with severe intellectual disability (ID) is limited, as current tests designed for normal children do not maintain their interest. Thus a manual puzzle version of the Raven's Coloured Progressive Matrices (RCPM) was devised to appeal to the attentional and sensory preferences and language limitations of children with ID. It was hypothesized that performance on the book and manual puzzle forms would not differ for typically developing children but that children with ID would perform better on the puzzle form. The first study assessed the validity of this puzzle form of the RCPM for 76 typically developing children in a test-retest crossover design, with a 3 week interval between tests. A second study tested performance and completion rate for the puzzle form compared to the book form in a sample of 164 children with ID. In the first study, no significant difference was found between performance on the puzzle and book forms in typically developing children, irrespective of the order of completion. The second study demonstrated a significantly higher performance and completion rate for the puzzle form compared to the book form in the ID population. Similar performance on book and puzzle forms of the RCPM by typically developing children suggests that both forms measure the same construct. These findings suggest that the puzzle form does not require greater cognitive ability but demands sensory-motor attention and limits distraction in children with severe ID. Thus, we suggest the puzzle form of the RCPM is a more reliable measure of the non-verbal mentation of children with severe ID than the book form.

Defect printability for high-exposure dose advanced packaging applications

NASA Astrophysics Data System (ADS)

Mikles, Max; Flack, Warren; Nguyen, Ha-Ai; Schurz, Dan

2003-12-01

Pellicles are used in semiconductor lithography to minimize printable defects and reduce reticle cleaning frequency. However, there are a growing number of microlithography applications, such as advanced packaging and nanotechnology, where it is not clear that pellicles always offer a significant benefit. These applications have relatively large critical dimensions and require ultra thick photoresists with extremely high exposure doses. Given that the lithography is performed in Class 100 cleanroom conditions, it is possible that the risk of defects from contamination is sufficiently low that pellicles would not be required on certain process layer reticles. The elimination of the pellicle requirement would provide a cost reduction by saving the original pellicle cost and eliminating future pellicle replacement and repair costs. This study examines the imaging potential of defects with reticle patterns and processes typical for gold-bump and solder-bump advanced packaging lithography. The test reticle consists of 30 to 90 μm octagonal contact patterns representative of advanced packaging reticles. Programmed defects are added that represent the range of particle sizes (3 to 30 μm) normally protected by the pellicle and that are typical of advanced packaging lithography cleanrooms. The reticle is exposed using an Ultratech Saturn Spectrum 300e2 1X stepper on wafers coated with a variety of ultra thick (30 to 100 μm) positive and negative-acting photoresists commonly used in advanced packaging. The experimental results show that in many cases smaller particles continue to be yield issues for the feature size and density typical of advanced packaging processes. For the two negative photoresists studied it appears that a pellicle is not required for protection from defects smaller than 10 to 15 μm depending on the photoresist thickness. Thus the decision on pellicle usage for these materials would need to be made based on the device fabrication process and the cleanliness of a fabrication facility. For the two positive photoresists studied it appears that a pellicle is required to protect from defects down to 3 μm defects depending on the photoresist thickness. This suggests that a pellicle should always be used for these materials. Since a typical fabrication facility would use both positive and negative photoresists it may be advantageous to use pellicles on all reticles simply to avoid confusion. The cost savings of not using a pellicle could easily be outweighed by the yield benefits of using one.

Personality and lipid level differences associated with homosexual and bisexual identity in men.

PubMed

Snyder, P J; Weinrich, J D; Pillard, R C

1994-08-01

Self-identified homosexual (n = 30), bisexual (n = 29), and heterosexual (n = 31) men were compared on measures of gender-typical behavior, sex role, ego strength, and lipid levels. Homosexual men differed significantly from the heterosexual men on the gender-typical behavior and feminine sex-role measure (both in adulthood and in childhood), and several trends and significant differences were found on the biochemical measures of lipid levels (especially when 7 obese men were removed from the analyses). As a rule, the bisexual men were different from the heterosexual men on the above measures, but were indistinguishable from the homosexual men. Bisexuals differed from both of the other two groups, however, by scoring lower on the ego strength scale and by reporting themselves to be more often troubled, lonely, and depressed. We caution that the lipid analyses were made on single blood samples and require an extended replication; however, we report the data because of their possible theoretical interest and because they replicate work of 20 years ago.

Geographic Unified Commands (GUCs): A Necessary Step Towards Achieving Unified Action

DTIC Science & Technology

2009-10-23

in more than 150,000 dead or missing, and millions more homeless by the end of the first day17. The enormity of the crisis and lack of applicable... lacking appropriate representation), are never corrected and the ability to execute the plan is significantly impacted. Department of State and other...governmental agency planning organizations typically lack the depth of military personnel, with required joint expertise, that are needed to

A Prototype System for Retrieval of Gene Functional Information

PubMed Central

Folk, Lillian C.; Patrick, Timothy B.; Pattison, James S.; Wolfinger, Russell D.; Mitchell, Joyce A.

2003-01-01

Microarrays allow researchers to gather data about the expression patterns of thousands of genes simultaneously. Statistical analysis can reveal which genes show statistically significant results. Making biological sense of those results requires the retrieval of functional information about the genes thus identified, typically a manual gene-by-gene retrieval of information from various on-line databases. For experiments generating thousands of genes of interest, retrieval of functional information can become a significant bottleneck. To address this issue, we are currently developing a prototype system to automate the process of retrieval of functional information from multiple on-line sources. PMID:14728346

Social dilemma cooperation (unlike Dictator Game giving) is intuitive for men as well as women.

PubMed

Rand, David G

2017-11-01

Does intuition favor prosociality, or does prosocial behavior require deliberative self-control? The Social Heuristics Hypothesis (SHH) stipulates that intuition favors typically advantageous behavior - but which behavior is typically advantageous depends on both the individual and the context. For example, non-zero-sum cooperation (e.g. in social dilemmas like the Prisoner's Dilemma) typically pays off because of the opportunity for reciprocity. Conversely, reciprocity does not promote zero-sum cash transfers (e.g. in the Dictator Game, DG). Instead, DG giving can be long-run advantageous because of reputation concerns: social norms often require such behavior of women but not men. Thus, the SHH predicts that intuition will favor social dilemma cooperation regardless of gender, but only favor DG giving among women. Here I present meta-analytic evidence in support of this prediction. In 31 studies examining social dilemma cooperation (N=13,447), I find that promoting intuition increases cooperation to a similar extent for both men and women. This stands in contrast to the results from 22 DG studies (analyzed in Rand et al., 2016) where intuition promotes giving among women but not men. Furthermore, I show using meta-regression that the interaction between gender and intuition is significantly larger in the DG compared to the cooperation games. Thus, I find clear evidence that the role of intuition and deliberation varies across both setting and individual as predicted by the SHH.

Response requirement and increases in accuracy produced by stimulant drugs in a 5-choice serial reaction-time task in rats.

PubMed

Koffarnus, Mikhail N; Katz, Jonathan L

2011-02-01

Increased signal-detection accuracy on the 5-choice serial reaction time (5-CSRT) task has been shown with drugs that are useful clinically in treating attention deficit hyperactivity disorder (ADHD), but these increases are often small and/or unreliable. By reducing the reinforcer frequency, it may be possible to increase the sensitivity of this task to pharmacologically induced improvements in accuracy. Rats were trained to respond on the 5-CSRT task on a fixed ratio (FR) 1, FR 3, or FR 10 schedule of reinforcement. Drugs that were and were not expected to enhance performance were then administered before experimental sessions. Significant increases in accuracy of signal detection were not typically obtained under the FR 1 schedule with any drug. However, d-amphetamine, methylphenidate, and nicotine typically increased accuracy under the FR 3 and FR 10 schedules. Increasing the FR requirement in the 5-CSRT task increases the likelihood of a positive result with clinically effective drugs, and may more closely resemble conditions in children with attention deficits.

A study on fine motor skills of Iranian children with attention deficit/hyper activity disorder aged from 6 to 11 years.

PubMed

Lavasani, Negar Miri; Stagnitti, Karen

2011-06-01

The aim of this study was to compare the fine motor skills of two groups of Iranian children. Of the 55 male Tehranian children aged 6 to 10 years, 29 children were typically developing and 26 were identified as attention deficit hyperactivity disorder (ADHD) using the Diagnostic and Statistical Manual of Mental Disorder. All children were assessed using the Raven Intelligence Test and nine fine motor tasks. There were no significant differences between the groups based on intelligence. In eight of the fine motor tasks, there was a significant difference between the groups. These tasks were cutting, placing dots in a grid pattern without direction, threading beads, drawing a line within 1 and 2 minutes, finger movements and Purdue pegboard. Boys who have been identified as ADHD have poorer fine motor skills compared to typically developing boys of the same age. Children aged 6 to 10 years who have been identified as ADHD will require more attention to their fine motor skill performance to enable greater participation in daily living tasks in Tehran such as writing, fine arts and dressing which require fast and quick hand motor skills. There are still limitations in this area; therefore, research in fine motor skills and ADHD children are recommended for future research. Copyright © 2010 John Wiley & Sons, Ltd.

Late erythropoietin for preventing red blood cell transfusion in preterm and/or low birth weight infants.

PubMed

Aher, Sanjay M; Ohlsson, Arne

2014-04-23

Low plasma levels of erythropoietin (EPO) in preterm infants provide a rationale for the use of EPO to prevent or treat anaemia. To assess the effectiveness and safety of late initiation of erythropoietin (EPO) between eight and 28 days after birth, in reducing the use of red blood cell (RBC) transfusions in preterm and/or low birth weight infants. We searched the Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE, EMBASE, and CINAHL in July 2013. Additional searches included the Pediatric Academic Societies Annual Meetings from 2000 to 2013 (Abstracts2View™) and clinical trials registries (www.clinicaltrials.gov; www.controlled-trials.com; and who.int/ictrp/en). For this update we moved one study from the early EPO review to this late EPO review. Randomised or quasi-randomised controlled trials of late initiation of EPO treatment (started at ≥ eight days of age) versus placebo or no intervention in preterm (< 37 weeks) and/or low birth weight (< 2500 g) neonates. We performed data collection and analyses in accordance with the methods of the Cochrane Neonatal Review Group. We include 30 studies (31 comparisons) randomising 1591 preterm infants. Literature searches in 2013 did not identify any new study for inclusion. For this update we moved one study enrolling 230 infants from the early EPO review to this late EPO review.Most included trials were of small sample size. The meta-analysis showed a significant effect of the use of one or more RBC transfusions (20 studies (n = 1142); typical risk ratio (RR) 0.71, 95% confidence interval (CI) 0.64 to 0.79; typical risk difference (RD) -0.17, 95% CI -0.22 to -0.12; typical number needed to treat for an additional beneficial outcome (NNTB) 6, 95% CI 5 to 8). There was moderate heterogeneity for this outcome (RR I² = 68%; RD I² = 60%). We obtained similar results in secondary analyses based on different combinations of high/low doses of EPO and iron supplementation. There was no significant reduction in the total volume (mL/kg) of blood transfused per infant [typical mean difference (MD) -1.6 mL/kg, 95% CI -5.8 to 2.6); 5 studies, 197 infants]. There was high heterogeneity for this outcome (I² = 92%). There was a significant reduction in the number of transfusions per infant (11 studies enrolling 817 infants; typical MD -0.22, 95% CI -0.38 to -0.06). There was high heterogeneity for this outcome (I² = 94%).Three studies including 404 infants reported on retinopathy of prematurity (ROP) (all stages or stage not reported), with a typical RR 1.27 (95% CI 0.99 to 1.64) and a typical RD of 0.09 (95% CI -0.00 to 0.18). There was high heterogeneity for this outcome for both RR (I² = 83%) and RD (I² = 82%). Three trials enrolling 442 infants reported on ROP (stage ≥ 3). The typical RR was 1.73 (95% CI 0.92 to 3.24) and the typical RD was 0.05 (95% CI -0.01 to 0.10). There was minimal heterogeneity for this outcome for RR (I² = 18%) but high heterogeneity for RD (I² = 79%). There were no significant differences in other clinical outcomes. There was no reduction in necrotizing enterocolitis in spite of a reduction in the use of RBC transfusions. Long-term neurodevelopmental outcomes were not reported. Late administration of EPO reduces the use of one or more RBC transfusions, the number of RBC transfusions per infant (< 1 transfusion per infant) but not the total volume (ml/kg) of RBCs transfused per infant. Any donor exposure is likely not avoided as most studies included infants who had received RBC transfusions prior to trial entry. Late EPO does not significantly reduce or increase any clinically important adverse outcomes except for a trend in increased risk for ROP. Further research of the use of late EPO treatment to prevent donor exposure is not indicated. Research efforts should focus on limiting donor exposure during the first few days of life in sick neonates, when RBC requirements are most likely to be required and cannot be prevented by late EPO treatment. The use of satellite packs (dividing one unit of donor blood into many smaller aliquots) may reduce donor exposure.

Space station needs, attributes and architectural options study. Volume 3: Requirements

NASA Technical Reports Server (NTRS)

1983-01-01

A typical system specification format is presented and requirements are compiled. A Program Specification Tree is shown showing a high inclination space station and a low inclination space station with their typical element breakdown, also represented along the top blocks are the interfaces with other systems. The specification format is directed at the Low Inclination space station.

Recent research related to prediction of stall/spin characteristics of fighter aircraft

NASA Technical Reports Server (NTRS)

Nguyen, L. T.; Anglin, E. L.; Gilbert, W. P.

1976-01-01

The NASA Langley Research Center is currently engaged in a stall/spin research program to provide the fundamental information and design guidelines required to predict the stall/spin characteristics of fighter aircraft. The prediction methods under study include theoretical spin prediction techniques and piloted simulation studies. The paper discusses the overall status of theoretical techniques including: (1) input data requirements, (2) math model requirements, and (3) correlation between theoretical and experimental results. The Langley Differential Maneuvering Simulator (DMS) facility has been used to evaluate the spin susceptibility of several current fighters during typical air combat maneuvers and to develop and evaluate the effectiveness of automatic departure/spin prevention concepts. The evaluation procedure is described and some of the more significant results of the studies are presented.

Financing biotechnology projects: lender due diligence requirements and the role of independent technical consultants.

PubMed

Keller, J B; Plath, P B

1999-01-01

An increasing number of biotechnology projects are being brought to commercialization using conventional structured finance sources, which have traditionally only been available to proven technologies and primary industries. Attracting and securing competitive cost financing from mainstream lenders, however, will require the sponsor of a new technology or process to undergo a greater level of due diligence. The specific areas and intensity of investigation, which are typically required by lenders in order to secure long-term financing for biotechnology-based manufacturing systems, is reviewed. The processes for evaluating the adequacy of prior laboratory testing and pilot plant demonstrations is discussed. Particular emphasis is given to scale-up considerations and the ability of the proposed facility design to accommodate significant modifications, in the event that scale-up problems are encountered.

Should prenatal hydronephrosis that resolves before birth be followed postnatally? Analysis and comparison to persistent prenatal hydronephrosis.

PubMed

Scarborough, Patrick L; Ferrara, Elizabeth; Storm, Douglas W

2015-09-01

Prenatal ultrasonography has greatly enhanced detection of congenital genitourinary abnormalities. However, although persistent prenatal hydronephrosis (PPH) is typically imaged and followed postnatally, it remains unclear if prenatal hydronephrosis that resolves in utero (RPH) should be similarly managed. We determined postnatal abnormalities associated with RPH and compared these to those associated with PPH. We performed a retrospective review of all consecutive patients evaluated for prenatal hydronephrosis over 24 months. Patients were followed prenatally with serial ultrasounds and postnatally with ultrasonography and a voiding cystourethrogram. Of the consecutive 165 patients enrolled in the study, 72 had RPH. The average prenatal anterior-posterior renal pelvis length was significantly longer in patients with PPH (5.5 mm) than in those with RPH (4.9 mm) (p = 0.01). Recurrent postnatal hydronephrosis occurred in 44% of patients with RPH, with eventual resolution in 34% of those affected. In comparison, 29% of PPH cases resolved postnatally. Mean time to resolution was statistically shorter for PPH (116 days) than for RPH (175 days) (p = 0.01). Seven PPH patients required surgery, while no RPH patients needed intervention (difference was statistically significant). A significant number of RPH children had postnatal hydronephrosis. Despite a slower resolution time, no children with RPH required intervention. Although RPH may recur postnatally, the significantly lower chance of intervention being required suggests that these children may not require postnatal imaging.

Shear joint capability versus bolt clearance

NASA Technical Reports Server (NTRS)

Lee, H. M.

1992-01-01

The results of a conservative analysis approach into the determination of shear joint strength capability for typical space-flight hardware as a function of the bolt-hole clearance specified in the design are presented. These joints are comprised of high-strength steel fasteners and abutments constructed of aluminum alloys familiar to the aerospace industry. A general analytical expression was first arrived at which relates bolt-hole clearance to the bolt shear load required to place all joint fasteners into a shear transferring position. Extension of this work allowed the analytical development of joint load capability as a function of the number of fasteners, shear strength of the bolt, bolt-hole clearance, and the desired factor of safety. Analysis results clearly indicate that a typical space-flight hardware joint can withstand significant loading when less than ideal bolt hole clearances are used in the design.

The DalHouses: 100 new photographs of houses with ratings of typicality, familiarity, and degree of similarity to faces.

PubMed

Filliter, Jillian H; Glover, Jacqueline M; McMullen, Patricia A; Salmon, Joshua P; Johnson, Shannon A

2016-03-01

Houses have often been used as comparison stimuli in face-processing studies because of the many attributes they share with faces (e.g., distinct members of a basic category, consistent internal features, mono-orientation, and relative familiarity). Despite this, no large, well-controlled databases of photographs of houses that have been developed for research use currently exist. To address this gap, we photographed 100 houses and carefully edited these images. We then asked 41 undergraduate students (18 to 31 years of age) to rate each house on three dimensions: typicality, likeability, and face-likeness. The ratings had a high degree of face validity, and analyses revealed a significant positive correlation between typicality and likeability. We anticipate that this stimulus set (i.e., the DalHouses) and the associated ratings will prove useful to face-processing researchers by minimizing the effort required to acquire stimuli and allowing for easier replication and extension of studies. The photographs of all 100 houses and their ratings data can be obtained at http://dx.doi.org/10.6084/m9.figshare.1279430.

Error-Monitoring in Response to Social Stimuli in Individuals with Higher-Functioning Autism Spectrum Disorder

PubMed Central

McMahon, Camilla M.; Henderson, Heather A.

2014-01-01

Error-monitoring, or the ability to recognize one's mistakes and implement behavioral changes to prevent further mistakes, may be impaired in individuals with Autism Spectrum Disorder (ASD). Children and adolescents (ages 9-19) with ASD (n = 42) and typical development (n = 42) completed two face processing tasks that required discrimination of either the gender or affect of standardized face stimuli. Post-error slowing and the difference in Error-Related Negativity amplitude between correct and incorrect responses (ERNdiff) were used to index error-monitoring ability. Overall, ERNdiff increased with age. On the Gender Task, individuals with ASD had a smaller ERNdiff than individuals with typical development; however, on the Affect Task, there were no significant diagnostic group differences on ERNdiff. Individuals with ASD may have ERN amplitudes similar to those observed in individuals with typical development in more social contexts compared to less social contexts due to greater consequences for errors, more effortful processing, and/or reduced processing efficiency in these contexts. Across all participants, more post-error slowing on the Affect Task was associated with better social cognitive skills. PMID:25066088

Values conflicts in professional-community collaborations.

PubMed

Sabin, James E

2010-01-01

GAP/I and INP+ represent markedly divergent cultures and therefore highlight the opportunities and strains associated with professional-community collaborations. I believe, however, that the factors that emerge from studying GAP/I-INP+ are not idiosyncratic and are relevant for other professional-community dyads. Every such partnership is likely to require some form of bridging mechanism to serve the same purposes as Mr Varghese's role did. The task of creating a zone of optimal tension may be less familiar than the need to build bridges but it is no less important. Tension between partners with significantly different cultural backgrounds has tremendous potential for generating misunderstanding and distrust. Avoiding tension-laden issues is likely to entail significant cost, whether in the form of resentment, distrust, withdrawal, or settling for a lesser outcome than could be achieved. Finally, creating and sustaining the potential for constructive tension typically requires the humble virtues associated with servant-leadership: patience, persistence and understanding.

Dose Control System in the Optima XE Single Wafer High Energy Ion Implanter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Satoh, Shu; Yoon, Jongyoon; David, Jonathan

2011-01-07

Photoresist outgassing can significantly compromise accurate dosimetry of high energy implants. High energy implant even at a modest beam current produces high beam powers which create significantly worse outgassing than low and medium energy implants and the outgassing continues throughout the implant due to the low dose in typical high energy implant recipes. In the previous generation of high energy implanters, dose correction by monitoring of process chamber pressure during photoresist outgassing has been used. However, as applications diversify and requirements change, the need arises for a more versatile photoresist correction system to match the versatility of a single wafermore » high energy ion implanter. We have successfully developed a new dosimetry system for the Optima XE single wafer high energy ion implanter which does not require any form of compensation due to the implant conditions. This paper describes the principles and performance of this new dose system.« less

Out-Of-Pocket Prescription Costs Under A Typical Silver Plan Are Twice As High As They Are In The Average Employer Plan.

PubMed

Thorpe, Kenneth E; Allen, Lindsay; Joski, Peter

2015-10-01

The health insurance Marketplaces created under the Affordable Care Act have attracted nearly ten million enrollees, including many people who were previously insured by an employer-sponsored plan. The most popular Marketplace plan--the silver plan--has significantly higher cost sharing than does a typical employer-sponsored plan, which may cause patients to reduce the use of cost-saving services that are essential for managing chronic conditions. We estimated the impact of higher cost sharing on drug and medical spending among patients with chronic conditions. Using national data, we compared cost sharing and prescription and medical spending for patients covered by employer-sponsored plans to the spending for those in a typical silver plan in the Marketplaces. Our results show that out-of-pocket expenses for medications in a typical silver plan are twice as high as they are in the average employer-sponsored plan, resulting in fewer prescriptions filled and refilled and in higher spending on other medical services. Maintaining the use of cost-effective prescription medications might require lower cost sharing for patients with chronic conditions than is currently found in the Marketplaces. Project HOPE—The People-to-People Health Foundation, Inc.

Lunar environment and design of China's first moon rover Yutu

NASA Astrophysics Data System (ADS)

Jianhui, Wu

China launched the Chang'e-3 lunar probe with the country's first moon rover aboard on Dec.14, marking a significant step toward deep space exploration.Lunar environment and environmental tests of typical lunar survyeors are discussed in this papaer.According to the needs of China's lunar exploration project,environmental impact of moon rovers and Yutu design ideas are studied.Through the research, temperature control device, micro-gravity environment design ,dust and other equipment devices used on Yutu all meet the mission requirements.

Potential end-to-end imaging information rate advantages of various alternative communication systems

NASA Technical Reports Server (NTRS)

Rice, R. F.

1978-01-01

Various communication systems were considered which are required to transmit both imaging and a typically error sensitive, class of data called general science/engineering (gse) over a Gaussian channel. The approach jointly treats the imaging and gse transmission problems, allowing comparisons of systems which include various channel coding and data compression alternatives. Actual system comparisons include an Advanced Imaging Communication System (AICS) which exhibits the rather significant potential advantages of sophisticated data compression coupled with powerful yet practical channel coding.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buechler, Elizabeth D.; Pallin, Simon B.; Boudreaux, Philip R.

The indoor air temperature and relative humidity in residential buildings significantly affect material moisture durability, HVAC system performance, and occupant comfort. Therefore, indoor climate data is generally required to define boundary conditions in numerical models that evaluate envelope durability and equipment performance. However, indoor climate data obtained from field studies is influenced by weather, occupant behavior and internal loads, and is generally unrepresentative of the residential building stock. Likewise, whole-building simulation models typically neglect stochastic variables and yield deterministic results that are applicable to only a single home in a specific climate. The

Pyrolytic graphite collector development program

NASA Technical Reports Server (NTRS)

Wilkins, W. J.

1982-01-01

Pyrolytic graphite promises to have significant advantages as a material for multistage depressed collector electrodes. Among these advantages are lighter weight, improved mechanical stiffness under shock and vibration, reduced secondary electron back-streaming for higher efficiency, and reduced outgassing at higher operating temperatures. The essential properties of pyrolytic graphite and the necessary design criteria are discussed. This includes the study of suitable electrode geometries and methods of attachment to other metal and ceramic collector components consistent with typical electrical, thermal, and mechanical requirements.

Impact of Increasing Home Size on Energy Demand, The

EIA Publications

2012-01-01

Homes built since 1990 are on average 27% larger than homes built in earlier decades, a significant trend because most energy end-uses are correlated with the size of the home. As square footage increases, the burden on heating and cooling equipment rises, lighting requirements increase, and the likelihood that the household uses more than one refrigerator increases. Square footage typically stays fixed over the life of a home and it is a characteristic that is expensive, even impractical to alter to reduce energy consumption.

Slip of the tongue: Implications for evolution and language development.

PubMed

Forrester, Gillian S; Rodriguez, Alina

2015-08-01

A prevailing theory regarding the evolution of language implicates a gestural stage prior to the emergence of speech. In support of a transition of human language from a gestural to a vocal system, articulation of the hands and the tongue are underpinned by overlapping left hemisphere dominant neural regions. Behavioral studies demonstrate that human adults perform sympathetic mouth actions in imitative synchrony with manual actions. Additionally, right-handedness for precision manual actions in children has been correlated with the typical development of language, while a lack of hand bias has been associated with psychopathology. It therefore stands to reason that sympathetic mouth actions during fine precision motor action of the hands may be lateralized. We employed a fine-grained behavioral coding paradigm to provide the first investigation of tongue protrusions in typically developing 4-year old children. Tongue protrusions were investigated across a range of cognitive tasks that required varying degrees of manual action: precision motor action, gross motor action and no motor actions. The rate of tongue protrusions was influenced by the motor requirements of the task and tongue protrusions were significantly right-biased for only precision manual motor action (p<.001). From an evolutionary perspective, tongue protrusions can drive new investigations regarding how an early human communication system transitioned from hand to mouth. From a developmental perspective, the present study may serve to reveal patterns of tongue protrusions during the motor development of typically developing children. Copyright © 2015 Elsevier B.V. All rights reserved.

Laboratory investigation of hemoglobinopathies and thalassemias: review and update.

PubMed

Clarke, G M; Higgins, T N

2000-08-01

Structural hemoglobin (Hb) variants typically are based on a point mutation in a globin gene that produce a single amino acid substitution in a globin chain. Although most are of limited clinical significance, a few important subtypes have been identified with some frequency. Homozygous Hb C and Hb S (sickle cell disease) produce significant clinical manifestations, whereas Hb E and Hb D homozygotes may be mildly symptomatic. Although heterozygotes for these variants are typically asymptomatic, diagnosis may be important for genetic counseling. Thalassemia, in contrast, results from quantitative reductions in globin chain synthesis. Those with diminished beta-globin chains are termed beta-thalassemias, whereas those with decreased alpha-chain production are called alpha-thalassemias. Severity of clinical manifestations in these disorders relates to the amount of globin chain produced and the stability of residual chains present in excess. The thalassemia minor syndromes are characterized clinically by mild anemia with persistent microcytosis. Thalassemia intermedia (i.e., Hb H disease) is typified by a moderate, variably compensated hemolytic anemia that may present with clinical symptoms during a period of physiologic stress such as infection, pregnancy, or surgery. The thalassemia major syndromes produce severe, life-threatening anemia. alpha-Thalassemia major usually is incompatible with extrauterine life; beta-thalassemia major presents in infancy and requires life-long transfusion therapy and/or bone marrow transplantation for successful control of the disease. Double heterozygosity for certain structural variants and/or thalassemia syndromes may also lead to severe clinical disease. Several guidelines have been published that outline the required steps for hemoglobinopathy and thalassemia investigation. The availability of HPLC has streamlined many of these requirements, allowing an efficient stepwise diagnostic strategy for these complex disorders.

On Improving the Quality of Gas Tungsten Arc Welded 18Ni 250 Maraging Steel Rocket Motor Casings

NASA Astrophysics Data System (ADS)

Gupta, Renu N.; Raja, V. S.; Mukherjee, M. K.; Narayana Murty, S. V. S.

2017-10-01

In view of their excellent combination of strength and toughness, maraging steels (18Ni 250 grade) are widely used for the fabrication of large sized solid rocket motor casings. Gas tungsten arc welding is commonly employed to fabricate these thin walled metallic casings, as the technique is not only simple but also provides the desired mechanical properties. However, sometimes, radiographic examination of welds reveals typical unacceptable indications requiring weld repair. As a consequence, there is a significant drop in weld efficiency and productivity. In this work, the nature and the cause of the occurrence of these defects have been investigated and an attempt is made to overcome the problem. It has been found that weld has a tendency to form typical Ca and Al oxide inclusions leading to the observed defects. The use of calcium fluoride flux has been found to produce a defect free weld with visible effect on weld bead finish. The flux promotes the separation of inclusions, refines the grain size and leads to significant improvement in mechanical properties of the weldment.

Supernovae as probes of cosmic parameters: estimating the bias from under-dense lines of sight

DOE Office of Scientific and Technical Information (OSTI.GOV)

Busti, V.C.; Clarkson, C.; Holanda, R.F.L., E-mail: vinicius.busti@uct.ac.za, E-mail: holanda@uepb.edu.br, E-mail: chris.clarkson@uct.ac.za

2013-11-01

Correctly interpreting observations of sources such as type Ia supernovae (SNe Ia) require knowledge of the power spectrum of matter on AU scales — which is very hard to model accurately. Because under-dense regions account for much of the volume of the universe, light from a typical source probes a mean density significantly below the cosmic mean. The relative sparsity of sources implies that there could be a significant bias when inferring distances of SNe Ia, and consequently a bias in cosmological parameter estimation. While the weak lensing approximation should in principle give the correct prediction for this, linear perturbationmore » theory predicts an effectively infinite variance in the convergence for ultra-narrow beams. We attempt to quantify the effect typically under-dense lines of sight might have in parameter estimation by considering three alternative methods for estimating distances, in addition to the usual weak lensing approximation. We find in each case this not only increases the errors in the inferred density parameters, but also introduces a bias in the posterior value.« less

Wheel slip control with torque blending using linear and nonlinear model predictive control

NASA Astrophysics Data System (ADS)

Basrah, M. Sofian; Siampis, Efstathios; Velenis, Efstathios; Cao, Dongpu; Longo, Stefano

2017-11-01

Modern hybrid electric vehicles employ electric braking to recuperate energy during deceleration. However, currently anti-lock braking system (ABS) functionality is delivered solely by friction brakes. Hence regenerative braking is typically deactivated at a low deceleration threshold in case high slip develops at the wheels and ABS activation is required. If blending of friction and electric braking can be achieved during ABS events, there would be no need to impose conservative thresholds for deactivation of regenerative braking and the recuperation capacity of the vehicle would increase significantly. In addition, electric actuators are typically significantly faster responding and would deliver better control of wheel slip than friction brakes. In this work we present a control strategy for ABS on a fully electric vehicle with each wheel independently driven by an electric machine and friction brake independently applied at each wheel. In particular we develop linear and nonlinear model predictive control strategies for optimal performance and enforcement of critical control and state constraints. The capability for real-time implementation of these controllers is assessed and their performance is validated in high fidelity simulation.

16 CFR Figure 5 to Part 1512 - Typical Handbrake Actuator Showing Grip Dimension

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Typical Handbrake Actuator Showing Grip Dimension 5 Figure 5 to Part 1512 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR BICYCLES Pt. 1512, Fig. 5 Figure 5 to Part 1512—Typical Handbrake Actuator Showing Grip Dimension...

16 CFR Figure 5 to Part 1512 - Typical Handbrake Actuator Showing Grip Dimension

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Typical Handbrake Actuator Showing Grip Dimension 5 Figure 5 to Part 1512 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR BICYCLES Pt. 1512, Fig. 5 Figure 5 to Part 1512—Typical Handbrake Actuator Showing Grip Dimension...

Collaborative Problem Solving in Young Typical Development and HFASD

ERIC Educational Resources Information Center

Kimhi, Yael; Bauminger-Zviely, Nirit

2012-01-01

Collaborative problem solving (CPS) requires sharing goals/attention and coordinating actions--all deficient in HFASD. Group differences were examined in CPS (HFASD/typical), with a friend versus with a non-friend. Participants included 28 HFASD and 30 typical children aged 3-6 years and their 58 friends and 58 non-friends. Groups were matched on…

16 CFR Figure 5 to Part 1512 - Typical Handbrake Actuator Showing Grip Dimension

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Typical Handbrake Actuator Showing Grip Dimension 5 Figure 5 to Part 1512 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR BICYCLES Pt. 1512, Fig. 5 Figure 5 to Part 1512—Typical Handbrake Actuator Showing Grip Dimension...

16 CFR Figure 5 to Part 1512 - Typical Handbrake Actuator Showing Grip Dimension

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Typical Handbrake Actuator Showing Grip Dimension 5 Figure 5 to Part 1512 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR BICYCLES Pt. 1512, Fig. 5 Figure 5 to Part 1512—Typical Handbrake Actuator Showing Grip Dimension...

16 CFR Figure 5 to Part 1512 - Typical Handbrake Actuator Showing Grip Dimension

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Typical Handbrake Actuator Showing Grip Dimension 5 Figure 5 to Part 1512 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR BICYCLES Pt. 1512, Fig. 5 Figure 5 to Part 1512—Typical Handbrake Actuator Showing Grip Dimension...

14 CFR Appendix C to Part 1215 - Typical User Activity Timeline

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Typical User Activity Timeline C Appendix C... RELAY SATELLITE SYSTEM (TDRSS) Pt. 1215, App. C Appendix C to Part 1215—Typical User Activity Timeline... mission model. 3 years before launch (Ref. § 1215.109(c). Submit general user requirements to permit...

The AgMIP GRIDded Crop Modeling Initiative (AgGRID) and the Global Gridded Crop Model Intercomparison (GGCMI)

NASA Technical Reports Server (NTRS)

Elliott, Joshua; Muller, Christoff

2015-01-01

Climate change is a significant risk for agricultural production. Even under optimistic scenarios for climate mitigation action, present-day agricultural areas are likely to face significant increases in temperatures in the coming decades, in addition to changes in precipitation, cloud cover, and the frequency and duration of extreme heat, drought, and flood events (IPCC, 2013). These factors will affect the agricultural system at the global scale by impacting cultivation regimes, prices, trade, and food security (Nelson et al., 2014a). Global-scale evaluation of crop productivity is a major challenge for climate impact and adaptation assessment. Rigorous global assessments that are able to inform planning and policy will benefit from consistent use of models, input data, and assumptions across regions and time that use mutually agreed protocols designed by the modeling community. To ensure this consistency, large-scale assessments are typically performed on uniform spatial grids, with spatial resolution of typically 10 to 50 km, over specified time-periods. Many distinct crop models and model types have been applied on the global scale to assess productivity and climate impacts, often with very different results (Rosenzweig et al., 2014). These models are based to a large extent on field-scale crop process or ecosystems models and they typically require resolved data on weather, environmental, and farm management conditions that are lacking in many regions (Bondeau et al., 2007; Drewniak et al., 2013; Elliott et al., 2014b; Gueneau et al., 2012; Jones et al., 2003; Liu et al., 2007; M¨uller and Robertson, 2014; Van den Hoof et al., 2011;Waha et al., 2012; Xiong et al., 2014). Due to data limitations, the requirements of consistency, and the computational and practical limitations of running models on a large scale, a variety of simplifying assumptions must generally be made regarding prevailing management strategies on the grid scale in both the baseline and future periods. Implementation differences in these and other modeling choices contribute to significant variation among global-scale crop model assessments in addition to differences in crop model implementations that also cause large differences in site-specific crop modeling (Asseng et al., 2013; Bassu et al., 2014).

xLuna - D emonstrator on ESA Mars Rover

NASA Astrophysics Data System (ADS)

Braga, P.; Henriques, L.; Carvalho, B.; Chevalley, P.; Zulianello, M.

2008-08-01

There is a significant gap between the services offered by existing space qualified Real-Time Operating Systems (RTOS) and those required by the most demanding future space applications. New requirements for autonomy, terrain mapping and navigation, Simultaneous Location and Mapping (SLAM), improvement of the throughput of science tasks, all demand high level services such as file systems or POSIX compliant interfaces. xLuna is an operating system that aims fulfilling these new requirements. Besides providing the typical services that of an RTOS (tasks and interrupts management, timers, message queues, etc), it also includes most of the features available in modern general-purpose operating systems, such as Linux. This paper describes a case study that proposes to demonstrate the usage of xLuna on board a rover currently in use for the development of algorithms in preparation of a mission to Mars.

Interference effects of vocalization on dual task performance

NASA Astrophysics Data System (ADS)

Owens, J. M.; Goodman, L. S.; Pianka, M. J.

1984-09-01

Voice command and control systems have been proposed as a potential means of off-loading the typically overburdened visual information processing system. However, prior to introducing novel human-machine interfacing technologies in high workload environments, consideration must be given to the integration of the new technologists within existing task structures to ensure that no new sources of workload or interference are systematically introduced. This study examined the use of voice interactive systems technology in the joint performance of two cognitive information processing tasks requiring continuous memory and choice reaction wherein a basis for intertask interference might be expected. Stimuli for the continuous memory task were presented aurally and either voice or keyboard responding was required in the choice reaction task. Performance was significantly degraded in each task when voice responding was required in the choice reaction time task. Performance degradation was evident in higher error scores for both the choice reaction and continuous memory tasks. Performance decrements observed under conditions of high intertask stimulus similarity were not statistically significant. The results signal the need to consider further the task requirements for verbal short-term memory when applying speech technology in multitask environments.

Mitigating reentry radio blackout by using a traveling magnetic field

NASA Astrophysics Data System (ADS)

Zhou, Hui; Li, Xiaoping; Xie, Kai; Liu, Yanming; Yu, Yuanyuan

2017-10-01

A hypersonic flight or a reentry vehicle is surrounded by a plasma layer that prevents electromagnetic wave transmission, which results in radio blackout. The magnetic-window method is considered a promising means to mitigate reentry communication blackout. However, the real application of this method is limited because of the need for strong magnetic fields. To reduce the required magnetic field strength, a novel method that applies a traveling magnetic field (TMF) is proposed in this study. A mathematical model based on magneto-hydrodynamic theory is adopted to analyze the effect of TMF on plasma. The mitigating effects of the TMF on the blackout of typical frequency bands, including L-, S-, and C-bands, are demonstrated. Results indicate that a significant reduction of plasma density occurs in the magnetic-window region by applying a TMF, and the reduction ratio is positively correlated with the velocity of the TMF. The required traveling velocities for eliminating the blackout of the Global Positioning System (GPS) and the typical telemetry system are also discussed. Compared with the constant magnetic-window method, the TMF method needs lower magnetic field strength and is easier to realize in the engineering field.

Effects of Tunable Data Compression on Geophysical Products Retrieved from Surface Radar Observations with Applications to Spaceborne Meteorological Radars

NASA Technical Reports Server (NTRS)

Gabriel, Philip M.; Yeh, Penshu; Tsay, Si-Chee

2013-01-01

This paper presents results and analyses of applying an international space data compression standard to weather radar measurements that can easily span 8 orders of magnitude and typically require a large storage capacity as well as significant bandwidth for transmission. By varying the degree of the data compression, we analyzed the non-linear response of models that relate measured radar reflectivity and/or Doppler spectra to the moments and properties of the particle size distribution characterizing clouds and precipitation. Preliminary results for the meteorologically important phenomena of clouds and light rain indicate that for a 0.5 dB calibration uncertainty, typical for the ground-based pulsed-Doppler 94 GHz (or 3.2 mm, W-band) weather radar used as a proxy for spaceborne radar in this study, a lossless compression ratio of only 1.2 is achievable. However, further analyses of the non-linear response of various models of rainfall rate, liquid water content and median volume diameter show that a lossy data compression ratio exceeding 15 is realizable. The exploratory analyses presented are relevant to future satellite missions, where the transmission bandwidth is premium and storage requirements of vast volumes of data, potentially problematic.

Study for identification of Beneficial uses of Space (BUS). Volume 3: Appendices

NASA Technical Reports Server (NTRS)

1975-01-01

The quantification of required specimen(s) from space processing experiments, the typical EMI measurements and estimates of a typical RF source, and the integration of commercial payloads into spacelab were considered.

Kinematic performance of fine motor control in attention-deficit/hyperactivity disorder: the effects of comorbid developmental coordination disorder and core symptoms.

PubMed

Lee, I-Ching; Chen, Yung-Jung; Tsai, Chin-Liang

2013-02-01

The aims of this study were: (i) to determine whether differences exist in the fine motor fluency and flexibility of three groups (children with attention-deficit/hyperactivity disorder [ADHD], children in whom ADHD is comorbid with developmental coordination disorder [DCD] [denoted as ADHD+DCD], and a typically developing control group); and (ii) to clarify whether the degree of severity of core symptoms affects performance. The Peabody Picture Vocabulary Test-Revised, the Beery-Buktenica Development Test of Visual-Motor Integration and the Movement Assessment Battery for Children were used as prescreening tests. The Integrated Visual and Auditory+Plus test was utilized to assess subjects' attention. The redesigned fine motor tracking and pursuit tasks were administered to evaluate subjects' fine motor performance. No significant difference was found when comparing the performance of the Children with ADHD and the typically developing group. Significant differences existed between children in whom ADHD is comorbid with DCD and typically developing children. Children with ADHD demonstrated proper fine motor fluency and flexibility, and deficient performance occurred when ADHD was comorbid with developmental coordination disorder. Children with ADHD had more difficulty implementing closed-loop movements that required higher levels of cognitive processing than those of their typically developing peers. Also, deficits in fine motor control were more pronounced when ADHD was combined with movement coordination problems. The severity of core symptoms had a greater effect on children with ADHD's fine motor flexibility than did fluency performance. In children with pure ADHD, unsmooth movement performance was highly related to the severity of core symptoms. © 2012 The Authors. Pediatrics International © 2012 Japan Pediatric Society.

Big questions, big science: meeting the challenges of global ecology.

PubMed

Schimel, David; Keller, Michael

2015-04-01

Ecologists are increasingly tackling questions that require significant infrastucture, large experiments, networks of observations, and complex data and computation. Key hypotheses in ecology increasingly require more investment, and larger data sets to be tested than can be collected by a single investigator's or s group of investigator's labs, sustained for longer than a typical grant. Large-scale projects are expensive, so their scientific return on the investment has to justify the opportunity cost-the science foregone because resources were expended on a large project rather than supporting a number of individual projects. In addition, their management must be accountable and efficient in the use of significant resources, requiring the use of formal systems engineering and project management to mitigate risk of failure. Mapping the scientific method into formal project management requires both scientists able to work in the context, and a project implementation team sensitive to the unique requirements of ecology. Sponsoring agencies, under pressure from external and internal forces, experience many pressures that push them towards counterproductive project management but a scientific community aware and experienced in large project science can mitigate these tendencies. For big ecology to result in great science, ecologists must become informed, aware and engaged in the advocacy and governance of large ecological projects.

Asynchronous brain-computer interface for cognitive assessment in people with cerebral palsy

NASA Astrophysics Data System (ADS)

Alcaide-Aguirre, R. E.; Warschausky, S. A.; Brown, D.; Aref, A.; Huggins, J. E.

2017-12-01

Objective. Typically, clinical measures of cognition require motor or speech responses. Thus, a significant percentage of people with disabilities are not able to complete standardized assessments. This situation could be resolved by employing a more accessible test administration method, such as a brain-computer interface (BCI). A BCI can circumvent motor and speech requirements by translating brain activity to identify a subject’s response. By eliminating the need for motor or speech input, one could use a BCI to assess an individual who previously did not have access to clinical tests. Approach. We developed an asynchronous, event-related potential BCI-facilitated administration procedure for the peabody picture vocabulary test (PPVT-IV). We then tested our system in typically developing individuals (N  =  11), as well as people with cerebral palsy (N  =  19) to compare results to the standardized PPVT-IV format and administration. Main results. Standard scores on the BCI-facilitated PPVT-IV, and the standard PPVT-IV were highly correlated (r  =  0.95, p  <  0.001), with a mean difference of 2.0  ±  6.4 points, which is within the standard error of the PPVT-IV. Significance. Thus, our BCI-facilitated PPVT-IV provided comparable results to the standard PPVT-IV, suggesting that populations for whom standardized cognitive tests are not accessible could benefit from our BCI-facilitated approach.

Prediction of the Electromagnetic Field Distribution in a Typical Aircraft Using the Statistical Energy Analysis

NASA Astrophysics Data System (ADS)

Kovalevsky, Louis; Langley, Robin S.; Caro, Stephane

2016-05-01

Due to the high cost of experimental EMI measurements significant attention has been focused on numerical simulation. Classical methods such as Method of Moment or Finite Difference Time Domain are not well suited for this type of problem, as they require a fine discretisation of space and failed to take into account uncertainties. In this paper, the authors show that the Statistical Energy Analysis is well suited for this type of application. The SEA is a statistical approach employed to solve high frequency problems of electromagnetically reverberant cavities at a reduced computational cost. The key aspects of this approach are (i) to consider an ensemble of system that share the same gross parameter, and (ii) to avoid solving Maxwell's equations inside the cavity, using the power balance principle. The output is an estimate of the field magnitude distribution in each cavity. The method is applied on a typical aircraft structure.

Compact atom interferometer using single laser

NASA Astrophysics Data System (ADS)

Chiow, Sheng-wey; Yu, Nan

2018-06-01

A typical atom interferometer requires vastly different laser frequencies at different stages of operation, e.g., near resonant light for laser cooling and far detuned light for atom optics, such that multiple lasers are typically employed. The number of laser units constrains the achievable minimum size and power in practical devices for resource critical environments such as space. We demonstrate a compact atom interferometer accelerometer operated by a single diode laser. This is achieved by dynamically changing the laser output frequency in GHz range while maintaining spectroscopic reference to an atomic transition via a sideband generated by phase modulation. At the same time, a beam path sharing configuration is also demonstrated for a compact sensor head design, in which atom interferometer beams share the same path as that of the cooling beam. This beam path sharing also significantly simplifies three-axis atomic accelerometry in microgravity using single sensor head.

Grout Isolation and Stabilization of Structures and Materials within Nuclear Facilities at the U.S. Department of Energy, Hanford Site, Summary - 12309

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phillips, S.J.; Phillips, M.; Etheridge, D.

2012-07-01

Per regulatory agreement and facility closure design, U.S. Department of Energy Hanford Site nuclear fuel cycle structures and materials require in situ isolation in perpetuity and/or interim physicochemical stabilization as a part of final disposal or interim waste removal, respectively. To this end, grout materials are being used to encase facilities structures or are being incorporated within structures containing hazardous and radioactive contaminants. Facilities where grout materials have been recently used for isolation and stabilization include: (1) spent fuel separations, (2) uranium trioxide calcining, (3) reactor fuel storage basin, (4) reactor fuel cooling basin transport rail tanker cars and casks,more » (5) cold vacuum drying and reactor fuel load-out, and (6) plutonium fuel metal finishing. Grout components primarily include: (1) portland cement, (2) fly ash, (3) aggregate, and (4) chemical admixtures. Mix designs for these typically include aggregate and non aggregate slurries and bulk powders. Placement equipment includes: (1) concrete piston line pump or boom pump truck for grout slurry, (2) progressive cavity and shearing vortex pump systems, and (3) extendable boom fork lift for bulk powder dry grout mix. Grout slurries placed within the interior of facilities were typically conveyed utilizing large diameter slick line and the equivalent diameter flexible high pressure concrete conveyance hose. Other facilities requirements dictated use of much smaller diameter flexible grout conveyance hose. Placement required direct operator location within facilities structures in most cases, whereas due to radiological dose concerns, placement has also been completed remotely with significant standoff distances. Grout performance during placement and subsequent to placement often required unique design. For example, grout placed in fuel basin structures to serve as interim stabilization materials required sufficient bearing i.e., unconfined compressive strength, to sustain heavy equipment yet, low breakout force to permit efficient removal by track hoe bucket or equivalent construction equipment. Further, flow of slurries through small orifice geometries of moderate head pressures was another typical design requirement. Phase separation of less than 1 percent was a typical design requirement for slurries. On the order of 30,000 cubic meters of cementitious grout have recently been placed in the above noted U.S. Department of Energy Hanford Site facilities or structures. Each has presented a unique challenge in mix design, equipment, grout injection or placement, and ultimate facility or structure performance. Unconfined compressive and shear strength, flow, density, mass attenuation coefficient, phase separation, air content, wash-out, parameters and others, unique to each facility or structure, dictate the grout mix design for each. Each mix design was tested under laboratory and scaled field conditions as a precursor to field deployment. Further, after injection or placement of each grout formulation, the material was field inspected either by standard laboratory testing protocols, direct physical evaluation, or both. (authors)« less

Rapid Analysis of Copper Ore in Pre-Smelter Head Flow Slurry by Portable X-ray Fluorescence.

PubMed

Burnett, Brandon J; Lawrence, Neil J; Abourahma, Jehad N; Walker, Edward B

2016-05-01

Copper laden ore is often concentrated using flotation. Before the head flow slurry can be smelted, it is important to know the concentration of copper and contaminants. The concentration of copper and other elements fluctuate significantly in the head flow, often requiring modification of the concentrations in the slurry prior to smelting. A rapid, real-time analytical method is needed to support on-site optimization of the smelter feedstock. A portable, handheld X-ray fluorescence spectrometer was utilized to determine the copper concentration in a head flow suspension at the slurry origin. The method requires only seconds and is reliable for copper concentrations of 2.0-25%, typically encountered in such slurries. © The Author(s) 2016.

Orbiter Kapton wire operational requirements and experience

NASA Technical Reports Server (NTRS)

Peterson, R. V.

1994-01-01

The agenda of this presentation includes the Orbiter wire selection requirements, the Orbiter wire usage, fabrication and test requirements, typical wiring installations, Kapton wire experience, NASA Kapton wire testing, summary, and backup data.

Energy Contents of Frequently Ordered Restaurant Meals and Comparison with Human Energy Requirements and US Department of Agriculture Database Information: A Multisite Randomized Study

PubMed Central

Urban, Lorien E.; Weber, Judith L.; Heyman, Melvin B.; Schichtl, Rachel L.; Verstraete, Sofia; Lowery, Nina S.; Das, Sai Krupa; Schleicher, Molly M.; Rogers, Gail; Economos, Christina; Masters, William A.; Roberts, Susan B.

2017-01-01

Background Excess energy intake from meals consumed away from home is implicated as a major contributor to obesity, and ~50% of US restaurants are individual or small-chain (non–chain) establishments that do not provide nutrition information. Objective To measure the energy content of frequently ordered meals in non–chain restaurants in three US locations, and compare with the energy content of meals from large-chain restaurants, energy requirements, and food database information. Design A multisite random-sampling protocol was used to measure the energy contents of the most frequently ordered meals from the most popular cuisines in non–chain restaurants, together with equivalent meals from large-chain restaurants. Setting Meals were obtained from restaurants in San Francisco, CA; Boston, MA; and Little Rock, AR, between 2011 and 2014. Main outcome measures Meal energy content determined by bomb calorimetry. Statistical analysis performed Regional and cuisine differences were assessed using a mixed model with restaurant nested within region×cuisine as the random factor. Paired t tests were used to evaluate differences between non–chain and chain meals, human energy requirements, and food database values. Results Meals from non–chain restaurants contained 1,205±465 kcal/meal, amounts that were not significantly different from equivalent meals from large-chain restaurants (+5.1%; P=0.41). There was a significant effect of cuisine on non–chain meal energy, and three of the four most popular cuisines (American, Italian, and Chinese) had the highest mean energy (1,495 kcal/meal). Ninety-two percent of meals exceeded typical energy requirements for a single eating occasion. Conclusions Non–chain restaurants lacking nutrition information serve amounts of energy that are typically far in excess of human energy requirements for single eating occasions, and are equivalent to amounts served by the large-chain restaurants that have previously been criticized for providing excess energy. Restaurants in general, rather than specific categories of restaurant, expose patrons to excessive portions that induce overeating through established biological mechanisms. PMID:26803805

Energy Contents of Frequently Ordered Restaurant Meals and Comparison with Human Energy Requirements and U.S. Department of Agriculture Database Information: A Multisite Randomized Study.

PubMed

Urban, Lorien E; Weber, Judith L; Heyman, Melvin B; Schichtl, Rachel L; Verstraete, Sofia; Lowery, Nina S; Das, Sai Krupa; Schleicher, Molly M; Rogers, Gail; Economos, Christina; Masters, William A; Roberts, Susan B

2016-04-01

Excess energy intake from meals consumed away from home is implicated as a major contributor to obesity, and ∼50% of US restaurants are individual or small-chain (non-chain) establishments that do not provide nutrition information. To measure the energy content of frequently ordered meals in non-chain restaurants in three US locations, and compare with the energy content of meals from large-chain restaurants, energy requirements, and food database information. A multisite random-sampling protocol was used to measure the energy contents of the most frequently ordered meals from the most popular cuisines in non-chain restaurants, together with equivalent meals from large-chain restaurants. Meals were obtained from restaurants in San Francisco, CA; Boston, MA; and Little Rock, AR, between 2011 and 2014. Meal energy content determined by bomb calorimetry. Regional and cuisine differences were assessed using a mixed model with restaurant nested within region×cuisine as the random factor. Paired t tests were used to evaluate differences between non-chain and chain meals, human energy requirements, and food database values. Meals from non-chain restaurants contained 1,205±465 kcal/meal, amounts that were not significantly different from equivalent meals from large-chain restaurants (+5.1%; P=0.41). There was a significant effect of cuisine on non-chain meal energy, and three of the four most popular cuisines (American, Italian, and Chinese) had the highest mean energy (1,495 kcal/meal). Ninety-two percent of meals exceeded typical energy requirements for a single eating occasion. Non-chain restaurants lacking nutrition information serve amounts of energy that are typically far in excess of human energy requirements for single eating occasions, and are equivalent to amounts served by the large-chain restaurants that have previously been criticized for providing excess energy. Restaurants in general, rather than specific categories of restaurant, expose patrons to excessive portions that induce overeating through established biological mechanisms. Copyright © 2016 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Use of aromatherapy to promote a therapeutic nurse environment.

PubMed

Johnson, Kari; West, Toni; Diana, Shelly; Todd, Jodi; Haynes, Brianna; Bernhardt, Judy; Johnson, Roberta

2017-06-01

Workplace stress can affect nurse satisfaction. Aroma therapy as a therapeutic use of essential oil can be beneficial in reducing stress. Assess perceived stress pre-post introduction of Essential Oil Lavender among registered nurses, charge nurses, and patient care technicians in a trauma intensive care unit, surgical specialty care unit and an orthopedic trauma unit. Pre-post intervention with a quasi-experimental design. After a pre-survey, Essential Oil Lavender was diffused 24h per day over 30days in a designated nursing area that all nurses were not required to enter on each unit. Dependent sample t-test for "how often do nurses feel stressed a work in a typical week" revealed pre-survey mean 2.97 (SD=0.99) which was significantly higher than post-survey mean 2.70 (SD=0.92) with significance, t(69)=2.36, p=0.021, suggesting a difference in how often staff felt stressed at work in a typical week, trending down from "feeling stressed half of time" to "once in a while". There were no statistically significant differences in pre-post survey scores for TICU, TOU, or SSC as separate units. Use of essential oils to decrease work-related stress among nursing staff may improve retention, workplace environment, and increase nurse satisfaction. Copyright © 2017 Elsevier Ltd. All rights reserved.

MIMIC For Millimeter Wave Integrated Circuit Radars

NASA Astrophysics Data System (ADS)

Seashore, C. R.

1987-09-01

A significant program is currently underway in the U.S. to investigate, develop and produce a variety of GaAs analog circuits for use in microwave and millimeter wave sensors and systems. This represents a "new wave" of RF technology which promises to significantly change system engineering thinking relative to RF Architectures. At millimeter wave frequencies, we look forward to a relatively high level of critical component integration based on MESFET and HEMT device implementations. These designs will spawn more compact RF front ends with colocated antenna/transceiver functions and innovative packaging concepts which will survive and function in a typical military operational environment which includes challenging temperature, shock and special handling requirements.

Outpatient imaging center valuations: do you need a fair-market value analysis?

PubMed

Koonsman, G S

2001-01-01

Typically, outpatient diagnostic imaging centers are formed as partnerships between radiologists, radiologists and hospitals, and/or radiologists and diagnostic imaging center management companies. As a result of these partnership structures, the question of equity valuation frequently arises. It is not only important to understand when an independent valuation would be required, but also what "type" of valuation needs to be performed. The type of valuation may vary based upon the use of the valuation. In partnerships that involve hospitals and physicians, the federal anti-kickback statutes (fraud and abuse laws) require that all transactions between referring physicians and hospitals be consummated at fair-market value. In addition, tax-exempt hospitals that enter into partnerships with physicians are required to enter into those transactions at fair-market value or risk losing their tax-exempt status. Fair-market value is also typically the standard of value that all partnerships strive to conduct equity transactions with shareholders. Qualifications required by those who perform independent fair-market value opinions include: Proper business valuation training and focus on valuations as a primary business Focus on the healthcare industry and specifically on the valuation of diagnostic imaging centers In order to perform a reasonable business valuation analysis, the appraiser must have access to a significant amount of financial, operational and legal information. The analyst must be able to understand the history of the imaging center as well as the projected future of the center. Ultimately, a valuation is a measurement of the estimated future cash flows of the center--risk adjusted--in order to quantify the present value of those cash flows.

V/STOL propulsion control analysis: Phase 2, task 5-9

NASA Technical Reports Server (NTRS)

1981-01-01

Typical V/STOL propulsion control requirements were derived for transition between vertical and horizontal flight using the General Electric RALS (Remote Augmented Lift System) concept. Steady-state operating requirements were defined for a typical Vertical-to-Horizontal transition and for a typical Horizontal-to-Vertical transition. Control mode requirements were established and multi-variable regulators developed for individual operating conditions. Proportional/Integral gain schedules were developed and were incorporated into a transition controller with capabilities for mode switching and manipulated variable reassignment. A non-linear component-level transient model of the engine was developed and utilized to provide a preliminary check-out of the controller logic. An inlet and nozzle effects model was developed for subsequent incorporation into the engine model and an aircraft model was developed for preliminary flight transition simulations. A condition monitoring development plan was developed and preliminary design requirements established. The Phase 1 long-range technology plan was refined and restructured toward the development of a real-time high fidelity transient model of a supersonic V/STOL propulsion system and controller for use in a piloted simulation program at NASA-Ames.

Exploring Typical and Atypical Safety Climate Perceptions of Practitioners in the Repair, Maintenance, Minor Alteration and Addition (RMAA) Sector in Hong Kong.

PubMed

Hon, Carol K H; Liu, Yulin

2016-09-22

The safety of repair, maintenance, minor alteration and addition (RMAA) work is an under-explored area. This study explored the typical and atypical safety climate perceptions of practitioners in the RMAA sector in Hong Kong, based on a self-administered questionnaire survey of 662 local practitioners in the industry. Profile analysis, via multidimensional scaling of the respondents' scores of three safety climate scales, identified one typical perception: high in management commitment to occupational health and safety (OHS) and employee involvement, low in applicability for safety rules and regulations, and low in responsibility for OHS. The respondents were clustered into typical and atypical perception groups according to their safety climate scores' match to the typical perception. A comparison of demographics between the two groups with logistic regression found that work level and direct employer significantly affect their classification. A multivariate analysis of variance of safety performance measures between the two groups indicated that the typical group had a significantly higher level of safety compliance than the atypical group, with no significant difference in safety participation or injury. The significance of this study lies in revealing the typical safety climate perception profile pattern of RMAA works and offering a new perspective of safety climate research.

Exploring Typical and Atypical Safety Climate Perceptions of Practitioners in the Repair, Maintenance, Minor Alteration and Addition (RMAA) Sector in Hong Kong

PubMed Central

Hon, Carol K.H.; Liu, Yulin

2016-01-01

The safety of repair, maintenance, minor alteration and addition (RMAA) work is an under-explored area. This study explored the typical and atypical safety climate perceptions of practitioners in the RMAA sector in Hong Kong, based on a self-administered questionnaire survey of 662 local practitioners in the industry. Profile analysis, via multidimensional scaling of the respondents’ scores of three safety climate scales, identified one typical perception: high in management commitment to occupational health and safety (OHS) and employee involvement, low in applicability for safety rules and regulations, and low in responsibility for OHS. The respondents were clustered into typical and atypical perception groups according to their safety climate scores’ match to the typical perception. A comparison of demographics between the two groups with logistic regression found that work level and direct employer significantly affect their classification. A multivariate analysis of variance of safety performance measures between the two groups indicated that the typical group had a significantly higher level of safety compliance than the atypical group, with no significant difference in safety participation or injury. The significance of this study lies in revealing the typical safety climate perception profile pattern of RMAA works and offering a new perspective of safety climate research. PMID:27669269

Deterministic Ethernet for Space Applications

NASA Astrophysics Data System (ADS)

Fidi, C.; Wolff, B.

2015-09-01

Typical spacecraft systems are distributed to be able to achieve the required reliability and availability targets of the mission. However the requirements on these systems are different for launchers, satellites, human space flight and exploration missions. Launchers require typically high reliability with very short mission times whereas satellites or space exploration missions require very high availability at very long mission times. Comparing a distributed system of launchers with satellites it shows very fast reaction times in launchers versus much slower once in satellite applications. Human space flight missions are maybe most challenging concerning reliability and availability since human lives are involved and the mission times can be very long e.g. ISS. Also the reaction times of these vehicles can get challenging during mission scenarios like landing or re-entry leading to very fast control loops. In these different applications more and more autonomous functions are required to fulfil the needs of current and future missions. This autonomously leads to new requirements with respect to increase performance, determinism, reliability and availability. On the other hand side the pressure on reducing costs of electronic components in space applications is increasing, leading to the use of more and more COTS components especially for launchers and LEO satellites. This requires a technology which is able to provide a cost competitive solution for both the high reliable and available deep-space as well as the low cost “new space” markets. Future spacecraft communication standards therefore have to be much more flexible, scalable and modular to be able to deal with these upcoming challenges. The only way to fulfill these requirements is, if they are based on open standards which are used cross industry leading to a reduction of the lifecycle costs and an increase in performance. The use of a communication network that fulfills these requirements will be essential for such spacecraft’s to allow the use in launcher, satellite, human space flight and exploration missions. Using one technology and the related infrastructure for these different applications will lead to a significant reduction of complexity and would moreover lead to significant savings in size weight and power while increasing the performance of the overall system. The paper focuses on the use of the TTEthernet technology for launchers, satellites and human spaceflight and will demonstrate the scalability of the technology for the different applications. The data used is derived from the ESA TRP 7594 on “Reliable High-Speed Data Bus/Network for Safety-Oriented Missions”.

Reconfigurable Pointing Control for High Resolution Space Spectroscopy

NASA Technical Reports Server (NTRS)

Bayard, David S.; Kia, Tooraj; vanCleve, Jeffrey

1997-01-01

In this paper, a pointing control performance criteria is established to support high resolution space spectroscopy. Results indicate that these pointing requirements are very stringent, and would typically be difficult to meet using standard 3-axis spacecraft control. To resolve this difficulty, it is shown that performance can be significantly improved using a reconfigurable control architecture that switches among a small bank of detuned Kalman filters. The effectiveness of the control reconfiguration approach is demonstrated by example on the Space Infra, Red Telescope Facility (SIRTF) pointing system, in support of the Infrared Spectrograph (IRS) payload.

Phonological short-term memory in logopenic variant primary progressive aphasia and mild Alzheimer's disease.

PubMed

Meyer, Aaron M; Snider, Sarah F; Campbell, Rachael E; Friedman, Rhonda B

2015-10-01

It has been argued that individuals with logopenic variant primary progressive aphasia (lvPPA) have an impairment of the phonological loop, which is a component of the short-term memory (STM) system. In contrast, this type of impairment is not thought to be present in mild typical Alzheimer's disease (AD). Thus, one would predict that people with lvPPA would score significantly lower than a matched AD group on tasks that require phonological STM. In the current study, an lvPPA group was compared with a mild AD group that was matched on age, education, and general cognitive functioning. For a subset of the tasks that involved pseudowords, the AD and lvPPA groups were compared to a healthy control group that was matched on age and education. The lvPPA group was more impaired than the AD group on all of the tasks that required phonological STM, including the pseudoword tasks, but there were no significant differences between these groups on tasks that required visuospatial STM. Compared to the healthy controls, the lvPPA group performed significantly worse on the repetition and reading of pseudowords, while the AD group did not differ significantly from the controls on these tasks. These findings are consistent with the hypothesis that phonological STM is impaired in lvPPA. Copyright © 2015 Elsevier Ltd. All rights reserved.

28 CFR 61.5 - Typical classes of action.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... These classes are: actions normally requiring environmental impact statements (EIS), actions normally not requiring assessments or EIS, and actions normally requiring assessments but not necessarily EIS...) Actions normally requiring EIS. None, except as noted in the appendices to this part. (2) Actions normally...

Who Governs Federally Qualified Health Centers?

PubMed Central

Wright, Brad

2017-01-01

To make them more responsive to their community’s needs, federally qualified health centers (FQHCs) are required to have a governing board comprised of at least 51% consumers. However, the extent to which consumer board members actually resemble the typical FQHC patient has not been assessed, which according to the political science literature on representation may influence the board’s ability to represent the community. This mixed-methods study uses four years of data from the Health Resources and Services Administration, combined with Uniform Data System, Bureau of Labor Statistics, and Area Resource File data to describe and identify factors associated with the composition of FQHC governing boards. Board members are classified into one of three groups: non-consumers, non-representative consumers (who do not resemble the typical FQHC patient), and representative consumers (who resemble the typical FQHC patient). The analysis finds that a minority of board members are representative consumers, and telephone interviews with a stratified random sample of 30 FQHC board members confirmed the existence of significant socioeconomic gaps between consumer board members and FQHC patients. This may make FQHCs less responsive to the needs of the predominantly low-income communities they serve. PMID:23052684

Child Eating Behaviors and Caregiver Feeding Practices in Children with Autism Spectrum Disorders.

PubMed

Kral, Tanja V E; Souders, Margaret C; Tompkins, Victoria H; Remiker, Adriane M; Eriksen, Whitney T; Pinto-Martin, Jennifer A

2015-01-01

This pilot study compared children with autism spectrum disorders (ASD) and typically developing children (TDC) on weight-related outcomes and caregiver-reported child eating behaviors and feeding practices. Cross-sectional study. Caregivers of 25 children with ASD and 30 TDC, ages 4-6. Caregivers completed validated questionnaires that assessed child eating behaviors and feeding practices. Children's height, weight, and waist circumference were measured. Children with ASD, when compared to TDC, showed significantly greater abdominal waist circumferences (p = .01) and waist-to-height ratios (p < .001). Children with ASD with atypical oral sensory sensitivity exhibited greater food avoidance behaviors, including reluctance to eat novel foods (p = .004), being selective about the range of foods they accept (p = .03), and undereating due to negative emotions (p = .02), than children with ASD with typical oral sensory sensitivity. Caregivers of children with ASD with atypical oral sensory sensitivity reported using food to regulate negative child emotions to a greater extent than caregivers of children with typical oral sensory sensitivity (p = .02). Children with ASD, especially those with atypical oral sensory sensitivity, are at increased risk for food avoidance behaviors and may require additional support in several feeding domains. © 2014 Wiley Periodicals, Inc.

Miniature High-Force, Long-Stroke SMA Linear Actuators

NASA Technical Reports Server (NTRS)

Cummin, Mark A.; Donakowski, William; Cohen, Howard

2008-01-01

Improved long-stroke shape-memory-alloy (SMA) linear actuators are being developed to exert significantly higher forces and operate at higher activation temperatures than do prior SMA actuators. In these actuators, long linear strokes are achieved through the principle of displacement multiplication, according to which there are multiple stages, each intermediate stage being connected by straight SMA wire segments to the next stage so that relative motions of stages are additive toward the final stage, which is the output stage. Prior SMA actuators typically include polymer housings or shells, steel or aluminum stages, and polymer pads between successive stages of displacement-multiplication assemblies. Typical output forces of prior SMA actuators range from 10 to 20 N, and typical strokes range from 0.5 to 1.5 cm. An important disadvantage of prior SMA wire actuators is relatively low cycle speed, which is related to actuation temperature as follows: The SMA wires in prior SMA actuators are typically made of a durable nickel/titanium alloy that has a shape-memory activation temperature of 80 C. An SMA wire can be heated quickly from below to above its activation temperature to obtain a stroke in one direction, but must then be allowed to cool to somewhat below its activation temperature (typically, less than or equal to 60 C in the case of an activation temperature of 80 C) to obtain a stroke in the opposite direction (return stroke). At typical ambient temperatures, cooling times are of the order of several seconds. Cooling times thus limit cycle speeds. Wires made of SMA alloys having significantly higher activation temperatures [denoted ultra-high-temperature (UHT) SMA alloys] cool to the required lower return-stroke temperatures more rapidly, making it possible to increase cycle speeds. The present development is motivated by a need, in some applications (especially aeronautical and space-flight applications) for SMA actuators that exert higher forces, operate at greater cycle speeds, and have stronger housings that can withstand greater externally applied forces and impacts. The main novel features of the improved SMA actuators are the following: 1) The ends of the wires are anchored in compact crimps made from short steel tubes. Each wire end is inserted in a tube, the tube is flattened between planar jaws to make the tube grip the wire, the tube is compressed to a slight U-cross-section deformation to strengthen the grip, then the crimp is welded onto one of the actuator stages. The pull strength of a typical crimp is about 125 N -- comparable to the strength of the SMA wire and greater than the typical pull strengths of wire-end anchors in prior SMA actuators. Greater pull strength is one of the keys to achievement of higher actuation force; 2) For greater strength and resistance to impacts, housings are milled from aluminum instead of being made from polymers. Each housing is made from two pieces in a clamshell configuration. The pieces are anodized to reduce sliding friction; 3) Stages are made stronger (to bear greater compression loads without excessive flexing) by making them from steel sheets thicker than those used in prior SMA actuators. The stages contain recessed pockets to accommodate the crimps. Recessing the pockets helps to keep overall dimensions as small as possible; and, 4) UHT SMA wires are used to satisfy the higher-speed/higher-temperature requirement.

Effects of targeting lower versus higher arterial oxygen saturations on death or disability in preterm infants.

PubMed

Askie, Lisa M; Darlow, Brian A; Davis, Peter G; Finer, Neil; Stenson, Ben; Vento, Maximo; Whyte, Robin

2017-04-11

The use of supplemental oxygen in the care of extremely preterm infants has been common practice since the 1940s. Despite this, there is little agreement regarding which oxygen saturation (SpO₂) ranges to target to maximise short- or long-term growth and development, while minimising harms. There are two opposing concerns. Lower oxygen levels (targeting SpO₂ at 90% or less) may impair neurodevelopment or result in death. Higher oxygen levels (targeting SpO₂ greater than 90%) may increase severe retinopathy of prematurity or chronic lung disease.The use of pulse oximetry to non-invasively assess neonatal SpO₂ levels has been widespread since the 1990s. Until recently there were no randomised controlled trials (RCTs) that had assessed whether it is better to target higher or lower oxygen saturation levels in extremely preterm infants, from birth or soon thereafter. As a result, there is significant international practice variation and uncertainty remains as to the most appropriate range to target oxygen saturation levels in preterm and low birth weight infants. 1. What are the effects of targeting lower versus higher oxygen saturation ranges on death or major neonatal and infant morbidities, or both, in extremely preterm infants?2. Do these effects differ in different types of infants, including those born at a very early gestational age, or in those who are outborn, without antenatal corticosteroid coverage, of male sex, small for gestational age or of multiple birth, or by mode of delivery? We used the standard search strategy of Cochrane Neonatal to search the Cochrane Central Register of Controlled Trials (CENTRAL 2016, Issue 4), MEDLINE via PubMed (1966 to 11 April 2016), Embase (1980 to 11 April 2016) and CINAHL (1982 to 11 April 2016). We also searched clinical trials databases, conference proceedings and the reference lists of retrieved articles for randomised controlled trials. Randomised controlled trials that enrolled babies born at less than 28 weeks' gestation, at birth or soon thereafter, and targeted SpO₂ ranges of either 90% or below or above 90% via pulse oximetry, with the intention of maintaining such targets for at least the first two weeks of life. We used the standard methods of Cochrane Neonatal to extract data from the published reports of the included studies. We sought some additional aggregate data from the original investigators in order to align the definitions of two key outcomes. We conducted the meta-analyses with Review Manager 5 software, using the Mantel-Haenszel method for estimates of typical risk ratio (RR) and risk difference (RD) and a fixed-effect model. We assessed the included studies using the Cochrane 'Risk of bias' and GRADE criteria in order to establish the quality of the evidence. We investigated heterogeneity of effects via pre-specified subgroup and sensitivity analyses. Five trials, which together enrolled 4965 infants, were eligible for inclusion. The investigators of these five trials had prospectively planned to combine their data as part of the NeOProM (Neonatal Oxygen Prospective Meta-analysis) Collaboration. We graded the quality of evidence as high for the key outcomes of death, major disability, the composite of death or major disability, and necrotising enterocolitis; and as moderate for blindness and retinopathy of prematurity requiring treatment.When an aligned definition of major disability was used, there was no significant difference in the composite primary outcome of death or major disability in extremely preterm infants when targeting a lower (SpO₂ 85% to 89%) versus a higher (SpO₂ 91% to 95%) oxygen saturation range (typical RR 1.04, 95% confidence interval (CI) 0.98 to 1.10; typical RD 0.02, 95% CI -0.01 to 0.05; 5 trials, 4754 infants) (high-quality evidence). Compared with a higher target range, a lower target range significantly increased the incidence of death at 18 to 24 months corrected age (typical RR 1.16, 95% CI 1.03 to 1.31; typical RD 0.03, 95% CI 0.01 to 0.05; 5 trials, 4873 infants) (high-quality evidence) and necrotising enterocolitis (typical RR 1.24, 95% 1.05 to 1.47; typical RD 0.02, 95% CI 0.01 to 0.04; 5 trials, 4929 infants; I² = 0%) (high-quality evidence). Targeting the lower range significantly decreased the incidence of retinopathy of prematurity requiring treatment (typical RR 0.72, 95% CI 0.61 to 0.85; typical RD -0.04, 95% CI -0.06 to -0.02; 5 trials, 4089 infants; I² = 69%) (moderate-quality evidence). There were no significant differences between the two treatment groups for major disability including blindness, severe hearing loss, cerebral palsy, or other important neonatal morbidities.A subgroup analysis of major outcomes by type of oximeter calibration software (original versus revised) found a significant difference in the treatment effect between the two software types for death (interaction P = 0.03), with a significantly larger treatment effect seen for those infants using the revised algorithm (typical RR 1.38, 95% CI 1.13 to 1.68; typical RD 0.06, 95% CI 0.01 to 0.10; 3 trials, 1716 infants). There were no other important differences in treatment effect shown by the subgroup analyses using the currently available data. In extremely preterm infants, targeting lower (85% to 89%) SpO₂ compared to higher (91% to 95%) SpO₂ had no significant effect on the composite outcome of death or major disability or on major disability alone, including blindness, but increased the average risk of mortality by 28 per 1000 infants treated. The trade-offs between the benefits and harms of the different oxygen saturation target ranges may need to be assessed within local settings (e.g. alarm limit settings, staffing, baseline outcome risks) when deciding on oxygen saturation targeting policies.

Modernizing Earth and Space Science Modeling Workflows in the Big Data Era

NASA Astrophysics Data System (ADS)

Kinter, J. L.; Feigelson, E.; Walker, R. J.; Tino, C.

2017-12-01

Modeling is a major aspect of the Earth and space science research. The development of numerical models of the Earth system, planetary systems or astrophysical systems is essential to linking theory with observations. Optimal use of observations that are quite expensive to obtain and maintain typically requires data assimilation that involves numerical models. In the Earth sciences, models of the physical climate system are typically used for data assimilation, climate projection, and inter-disciplinary research, spanning applications from analysis of multi-sensor data sets to decision-making in climate-sensitive sectors with applications to ecosystems, hazards, and various biogeochemical processes. In space physics, most models are from first principles, require considerable expertise to run and are frequently modified significantly for each case study. The volume and variety of model output data from modeling Earth and space systems are rapidly increasing and have reached a scale where human interaction with data is prohibitively inefficient. A major barrier to progress is that modeling workflows isn't deemed by practitioners to be a design problem. Existing workflows have been created by a slow accretion of software, typically based on undocumented, inflexible scripts haphazardly modified by a succession of scientists and students not trained in modern software engineering methods. As a result, existing modeling workflows suffer from an inability to onboard new datasets into models; an inability to keep pace with accelerating data production rates; and irreproducibility, among other problems. These factors are creating an untenable situation for those conducting and supporting Earth system and space science. Improving modeling workflows requires investments in hardware, software and human resources. This paper describes the critical path issues that must be targeted to accelerate modeling workflows, including script modularization, parallelization, and automation in the near term, and longer term investments in virtualized environments for improved scalability, tolerance for lossy data compression, novel data-centric memory and storage technologies, and tools for peer reviewing, preserving and sharing workflows, as well as fundamental statistical and machine learning algorithms.

Low-level laser/light therapy for androgenetic alopecia.

PubMed

Gupta, Aditya K; Lyons, Danika C A; Abramovits, William

2014-01-01

Androgenetic alopecia (AGA) is a persistent and pervasive condition that affects men worldwide. Some common treatment options for AGA include hair prosthetics, oral and topical medications, and surgical hair restoration (SHR). Pharmaceutical and SHR treatments are associated with limitations including adverse side effects and significant financial burden. Low-level laser or light (LLL) devices offer alternative treatment options that are not typically associated with adverse side effects or significant costs. There are clinic- and home-based LLL devices. One home-based laser comb device has set a standard for others; however, this device requires time devoted to carefully moving the comb through the hair to allow laser penetration to the scalp. A novel helmet-like LLL device for hair growth has proven effective in preliminary trials and allows for hands-free use. Regardless, there are few clinical trials that have been conducted regarding LLL devices for AGA and results are mixed. Further research is required to establish the true efficacy of these devices for hair growth in comparison to existing alternative therapies.

Effects of Friction and Plastic Deformation in Shock-Comminuted Damaged Rocks on Impact Heating

NASA Astrophysics Data System (ADS)

Kurosawa, Kosuke; Genda, Hidenori

2018-01-01

Hypervelocity impacts cause significant heating of planetary bodies. Such events are recorded by a reset of 40Ar-36Ar ages and/or impact melts. Here we investigate the influence of friction and plastic deformation in shock-generated comminuted rocks on the degree of impact heating using the iSALE shock-physics code. We demonstrate that conversion from kinetic to internal energy in the targets with strength occurs during pressure release, and additional heating becomes significant for low-velocity impacts (<10 km s-1). This additional heat reduces the impact-velocity thresholds required to heat the targets with the 0.1 projectile mass to temperatures for the onset of Ar loss and melting from 8 and 10 km s-1, respectively, for strengthless rocks to 2 and 6 km s-1 for typical rocks. Our results suggest that the impact conditions required to produce the unique features caused by impact heating span a much wider range than previously thought.

An Improved Algorithm to Generate a Wi-Fi Fingerprint Database for Indoor Positioning

PubMed Central

Chen, Lina; Li, Binghao; Zhao, Kai; Rizos, Chris; Zheng, Zhengqi

2013-01-01

The major problem of Wi-Fi fingerprint-based positioning technology is the signal strength fingerprint database creation and maintenance. The significant temporal variation of received signal strength (RSS) is the main factor responsible for the positioning error. A probabilistic approach can be used, but the RSS distribution is required. The Gaussian distribution or an empirically-derived distribution (histogram) is typically used. However, these distributions are either not always correct or require a large amount of data for each reference point. Double peaks of the RSS distribution have been observed in experiments at some reference points. In this paper a new algorithm based on an improved double-peak Gaussian distribution is proposed. Kurtosis testing is used to decide if this new distribution, or the normal Gaussian distribution, should be applied. Test results show that the proposed algorithm can significantly improve the positioning accuracy, as well as reduce the workload of the off-line data training phase. PMID:23966197

An improved algorithm to generate a Wi-Fi fingerprint database for indoor positioning.

PubMed

Chen, Lina; Li, Binghao; Zhao, Kai; Rizos, Chris; Zheng, Zhengqi

2013-08-21

The major problem of Wi-Fi fingerprint-based positioning technology is the signal strength fingerprint database creation and maintenance. The significant temporal variation of received signal strength (RSS) is the main factor responsible for the positioning error. A probabilistic approach can be used, but the RSS distribution is required. The Gaussian distribution or an empirically-derived distribution (histogram) is typically used. However, these distributions are either not always correct or require a large amount of data for each reference point. Double peaks of the RSS distribution have been observed in experiments at some reference points. In this paper a new algorithm based on an improved double-peak Gaussian distribution is proposed. Kurtosis testing is used to decide if this new distribution, or the normal Gaussian distribution, should be applied. Test results show that the proposed algorithm can significantly improve the positioning accuracy, as well as reduce the workload of the off-line data training phase.

From Sensory Perception to Lexical-Semantic Processing: An ERP Study in Non-Verbal Children with Autism.

PubMed

Cantiani, Chiara; Choudhury, Naseem A; Yu, Yan H; Shafer, Valerie L; Schwartz, Richard G; Benasich, April A

2016-01-01

This study examines electrocortical activity associated with visual and auditory sensory perception and lexical-semantic processing in nonverbal (NV) or minimally-verbal (MV) children with Autism Spectrum Disorder (ASD). Currently, there is no agreement on whether these children comprehend incoming linguistic information and whether their perception is comparable to that of typically developing children. Event-related potentials (ERPs) of 10 NV/MV children with ASD and 10 neurotypical children were recorded during a picture-word matching paradigm. Atypical ERP responses were evident at all levels of processing in children with ASD. Basic perceptual processing was delayed in both visual and auditory domains but overall was similar in amplitude to typically-developing children. However, significant differences between groups were found at the lexical-semantic level, suggesting more atypical higher-order processes. The results suggest that although basic perception is relatively preserved in NV/MV children with ASD, higher levels of processing, including lexical- semantic functions, are impaired. The use of passive ERP paradigms that do not require active participant response shows significant potential for assessment of non-compliant populations such as NV/MV children with ASD.

From Sensory Perception to Lexical-Semantic Processing: An ERP Study in Non-Verbal Children with Autism

PubMed Central

Cantiani, Chiara; Choudhury, Naseem A.; Yu, Yan H.; Shafer, Valerie L.; Schwartz, Richard G.; Benasich, April A.

2016-01-01

This study examines electrocortical activity associated with visual and auditory sensory perception and lexical-semantic processing in nonverbal (NV) or minimally-verbal (MV) children with Autism Spectrum Disorder (ASD). Currently, there is no agreement on whether these children comprehend incoming linguistic information and whether their perception is comparable to that of typically developing children. Event-related potentials (ERPs) of 10 NV/MV children with ASD and 10 neurotypical children were recorded during a picture-word matching paradigm. Atypical ERP responses were evident at all levels of processing in children with ASD. Basic perceptual processing was delayed in both visual and auditory domains but overall was similar in amplitude to typically-developing children. However, significant differences between groups were found at the lexical-semantic level, suggesting more atypical higher-order processes. The results suggest that although basic perception is relatively preserved in NV/MV children with ASD, higher levels of processing, including lexical- semantic functions, are impaired. The use of passive ERP paradigms that do not require active participant response shows significant potential for assessment of non-compliant populations such as NV/MV children with ASD. PMID:27560378

Face-to-face interference in typical and atypical development

PubMed Central

Riby, Deborah M; Doherty-Sneddon, Gwyneth; Whittle, Lisa

2012-01-01

Visual communication cues facilitate interpersonal communication. It is important that we look at faces to retrieve and subsequently process such cues. It is also important that we sometimes look away from faces as they increase cognitive load that may interfere with online processing. Indeed, when typically developing individuals hold face gaze it interferes with task completion. In this novel study we quantify face interference for the first time in Williams syndrome (WS) and Autism Spectrum Disorder (ASD). These disorders of development impact on cognition and social attention, but how do faces interfere with cognitive processing? Individuals developing typically as well as those with ASD (n = 19) and WS (n = 16) were recorded during a question and answer session that involved mathematics questions. In phase 1 gaze behaviour was not manipulated, but in phase 2 participants were required to maintain eye contact with the experimenter at all times. Looking at faces decreased task accuracy for individuals who were developing typically. Critically, the same pattern was seen in WS and ASD, whereby task performance decreased when participants were required to hold face gaze. The results show that looking at faces interferes with task performance in all groups. This finding requires the caveat that individuals with WS and ASD found it harder than individuals who were developing typically to maintain eye contact throughout the interaction. Individuals with ASD struggled to hold eye contact at all points of the interaction while those with WS found it especially difficult when thinking. PMID:22356183

Quantifying the thermal heat requirement of Brassica in assessing biophysical parameters under semi-arid microenvironments

NASA Astrophysics Data System (ADS)

Adak, Tarun; Chakravarty, N. V. K.

2010-07-01

Evaluation of the thermal heat requirement of Brassica spp. across agro-ecological regions is required in order to understand the further effects of climate change. Spatio-temporal changes in hydrothermal regimes are likely to affect the physiological growth pattern of the crop, which in turn will affect economic yields and crop quality. Such information is helpful in developing crop simulation models to describe the differential thermal regimes that prevail at different phenophases of the crop. Thus, the current lack of quantitative information on the thermal heat requirement of Brassica crops under debranched microenvironments prompted the present study, which set out to examine the response of biophysical parameters [leaf area index (LAI), dry biomass production, seed yield and oil content] to modified microenvironments. Following 2 years of field experiments on Typic Ustocrepts soils under semi-arid climatic conditions, it was concluded that the Brassica crop is significantly responsive to microenvironment modification. A highly significant and curvilinear relationship was observed between LAI and dry biomass production with accumulated heat units, with thermal accumulation explaining ≥80% of the variation in LAI and dry biomass production. It was further observed that the economic seed yield and oil content, which are a function of the prevailing weather conditions, were significantly responsive to the heat units accumulated from sowing to 50% physiological maturity. Linear regression analysis showed that growing degree days (GDD) could indicate 60-70% variation in seed yield and oil content, probably because of the significant response to differential thermal microenvironments. The present study illustrates the statistically strong and significant response of biophysical parameters of Brassica spp. to microenvironment modification in semi-arid regions of northern India.

An Evaluation of the Consumer Costs and Benefits of Energy Efficiency Resource Standards

NASA Astrophysics Data System (ADS)

Lessans, Mark D.

Of the modern-day policies designed to encourage energy efficiency, one with a significant potential for impact is that of Energy Efficiency Resource Standards (EERS). EERS policies place the responsibility for meeting an efficiency target on the electric and gas utilities, typically setting requirements for annual reductions in electricity generation or gas distribution to customers as a percentage of sales. To meet these requirements, utilities typically implement demand-side management (DSM) programs, which encourage energy efficiency at the customer level through incentives and educational initiatives. In Maryland, a statewide EERS has provided for programs which save a significant amount of energy, but is ultimately falling short in meeting the targets established by the policy. This study evaluates residential DSM programs offered by Pepco, a utility in Maryland, for cost-effectiveness. However, unlike most literature on the topic, analysis focuses on the costs-benefit from the perspective of the consumer, and not the utility. The results of this study are encouraging: the majority of programs analyzed show that the cost of electricity saved, or levelized cost of saved energy (LCSE), is less expensive than the current retail cost of electricity cost in Maryland. A key goal of this study is to establish a metric for evaluating the consumer cost-effectiveness of participation in energy efficiency programs made available by EERS. In doing so, the benefits of these programs can be effectively marketed to customers, with the hope that participation will increase. By increasing consumer awareness and buy-in, the original goals set out through EERS can be realized and the policies can continue to receive support.

Internal Cargo Integration

NASA Technical Reports Server (NTRS)

Hart, Angela

2006-01-01

A description of internal cargo integration is presented. The topics include: 1) Typical Cargo for Launch/Disposal; 2) Cargo Delivery Requirements; 3) Cargo Return Requirements; and 4) Vehicle On-Orbit Stay Time.

Evolution of Archival Storage (from Tape to Memory)

NASA Technical Reports Server (NTRS)

Ramapriyan, Hampapuram K.

2015-01-01

Over the last three decades, there has been a significant evolution in storage technologies supporting archival of remote sensing data. This section provides a brief survey of how these technologies have evolved. Three main technologies are considered - tape, hard disk and solid state disk. Their historical evolution is traced, summarizing how reductions in cost have helped being able to store larger volumes of data on faster media. The cost per GB of media is only one of the considerations in determining the best approach to archival storage. Active archives generally require faster response to user requests for data than permanent archives. The archive costs have to consider facilities and other capital costs, operations costs, software licenses, utilities costs, etc. For meeting requirements in any organization, typically a mix of technologies is needed.

Simultaneous measurements of absorption spectrum and refractive index in a microfluidic system.

PubMed

Helseth, Lars Egil

2012-02-13

The characterization of dyes in various solvents requires determination of the absorption spectrum of the dye as well as the refractive index of the solvent. Typically, the refractive index of the solvent and the absorption spectrum of the solute are measured using separate experimental setups where significant liquid volumes are required. In this work the first optical measurement system that is able to do simultaneous measurements of the refractive index of the solvent and the spectral properties of the solute in a microscopic volume is presented. The laser dye Rhodamine 6G in glycerol is investigated, and the refractive index of the solution is monitored using the interference pattern of the light scattered off the channel, while its spectral properties is found by monitoring reflected light from the channel.

A simple method for the measurement of reflective foil emissivity

NASA Astrophysics Data System (ADS)

Ballico, M. J.; van der Ham, E. W. M.

2013-09-01

Reflective metal foil is widely used to reduce radiative heat transfer within the roof space of buildings. Such foils are typically mass-produced by vapor-deposition of a thin metallic coating onto a variety of substrates, ranging from plastic-coated reinforced paper to "bubble-wrap". Although the emissivity of such surfaces is almost negligible in the thermal infrared, typically less than 0.03, an insufficiently thick metal coating, or organic contamination of the surface, can significantly increase this value. To ensure that the quality of the installed insulation is satisfactory, Australian building code AS/NZS 4201.5:1994 requires a practical agreed method for measurement of the emissivity, and the standard ASTM-E408 is implied. Unfortunately this standard is not a "primary method" and requires the use of specified expensive apparatus and calibrated reference materials. At NMIA we have developed a simple primary technique, based on an apparatus to thermally modulate the sample and record the apparent modulation in infra-red radiance with commercially available radiation thermometers. The method achieves an absolute accuracy in the emissivity of approximately 0.004 (k=2). This paper theoretically analyses the equivalence between the thermal emissivity measured in this manner, the effective thermal emissivity in application, and the apparent emissivity measured in accordance with ASTM-E408.

Lightweight Adaptation of Classifiers to Users and Contexts: Trends of the Emerging Domain

PubMed Central

Vildjiounaite, Elena; Gimel'farb, Georgy; Kyllönen, Vesa; Peltola, Johannes

2015-01-01

Intelligent computer applications need to adapt their behaviour to contexts and users, but conventional classifier adaptation methods require long data collection and/or training times. Therefore classifier adaptation is often performed as follows: at design time application developers define typical usage contexts and provide reasoning models for each of these contexts, and then at runtime an appropriate model is selected from available ones. Typically, definition of usage contexts and reasoning models heavily relies on domain knowledge. However, in practice many applications are used in so diverse situations that no developer can predict them all and collect for each situation adequate training and test databases. Such applications have to adapt to a new user or unknown context at runtime just from interaction with the user, preferably in fairly lightweight ways, that is, requiring limited user effort to collect training data and limited time of performing the adaptation. This paper analyses adaptation trends in several emerging domains and outlines promising ideas, proposed for making multimodal classifiers user-specific and context-specific without significant user efforts, detailed domain knowledge, and/or complete retraining of the classifiers. Based on this analysis, this paper identifies important application characteristics and presents guidelines to consider these characteristics in adaptation design. PMID:26473165

Multiscale numerical simulations of magnetoconvection at low magnetic Prandtl and Rossby numbers.

NASA Astrophysics Data System (ADS)

Maffei, S.; Calkins, M. A.; Julien, K. A.; Marti, P.

2017-12-01

The dynamics of the Earth's outer core is characterized by low values of the Rossby (Ro), Ekman and magnetic Prandtl numbers. These values indicate the large spectra of temporal and spatial scales that need to be accounted for in realistic numerical simulations of the system. Current direct numerical simulation are not capable of reaching this extreme regime, suggesting that a new class of models is required to account for the rich dynamics expected in the natural system. Here we present results from a quasi-geostrophic, multiscale model based on the scale separation implied by the low Ro typical of rapidly rotating systems. We investigate a plane layer geometry where convection is driven by an imposed temperature gradient and the hydrodynamic equations are modified by a large scale magnetic field. Analytical investigation shows that at values of thermal and magnetic Prandtl numbers relevant for liquid metals, the energetic requirements for the onset of convection is not significantly altered even in the presence of strong magnetic fields. Results from strongly forced nonlinear numerical simulations show the presence of an inverse cascade, typical of 2-D turbulence, when no or weak magnetic field is applied. For higher values of the magnetic field the inverse cascade is quenched.

A simple method for the measurement of reflective foil emissivity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ballico, M. J.; Ham, E. W. M. van der

Reflective metal foil is widely used to reduce radiative heat transfer within the roof space of buildings. Such foils are typically mass-produced by vapor-deposition of a thin metallic coating onto a variety of substrates, ranging from plastic-coated reinforced paper to 'bubble-wrap'. Although the emissivity of such surfaces is almost negligible in the thermal infrared, typically less than 0.03, an insufficiently thick metal coating, or organic contamination of the surface, can significantly increase this value. To ensure that the quality of the installed insulation is satisfactory, Australian building code AS/NZS 4201.5:1994 requires a practical agreed method for measurement of the emissivity,more » and the standard ASTM-E408 is implied. Unfortunately this standard is not a 'primary method' and requires the use of specified expensive apparatus and calibrated reference materials. At NMIA we have developed a simple primary technique, based on an apparatus to thermally modulate the sample and record the apparent modulation in infra-red radiance with commercially available radiation thermometers. The method achieves an absolute accuracy in the emissivity of approximately 0.004 (k=2). This paper theoretically analyses the equivalence between the thermal emissivity measured in this manner, the effective thermal emissivity in application, and the apparent emissivity measured in accordance with ASTM-E408.« less

Evaluation of coated metallic bipolar plates for polymer electrolyte membrane fuel cells

NASA Astrophysics Data System (ADS)

Yoon, Wonseok; Huang, Xinyu; Fazzino, Paul; Reifsnider, Kenneth L.; Akkaoui, Michael A.

Metallic bipolar plates for polymer electrolyte membrane (PEM) fuel cells typically require coatings for corrosion protection. Other requirements for the corrosion protective coatings include low electrical contact resistance, good mechanical robustness, low material and fabrication cost. The authors have evaluated a number of protective coatings deposited on stainless steel substrates by electroplating and physical vapor deposition (PVD) methods. The coatings are screened with an electrochemical polarization test for corrosion resistance; then the contact resistance test was performed on selected coatings. The coating investigated include Gold with various thicknesses (2 nm, 10 nm, and 1 μm), Titanium, Zirconium, Zirconium Nitride (ZrN), Zirconium Niobium (ZrNb), and Zirconium Nitride with a Gold top layer (ZrNAu). The substrates include three types of stainless steel: 304, 310, and 316. The results show that Zr-coated samples satisfy the DOE target for corrosion resistance at both anode and cathode sides in typical PEM fuel cell environments in the short-term, but they do not meet the DOE contact resistance goal. Very thin gold coating (2 nm) can significantly decrease the electrical contact resistance, however a relatively thick gold coating (>10 nm) with our deposition method is necessary for adequate corrosion resistance, particularly for the cathode side of the bipolar plate.

A convenient and accurate parallel Input/Output USB device for E-Prime.

PubMed

Canto, Rosario; Bufalari, Ilaria; D'Ausilio, Alessandro

2011-03-01

Psychological and neurophysiological experiments require the accurate control of timing and synchrony for Input/Output signals. For instance, a typical Event-Related Potential (ERP) study requires an extremely accurate synchronization of stimulus delivery with recordings. This is typically done via computer software such as E-Prime, and fast communications are typically assured by the Parallel Port (PP). However, the PP is an old and disappearing technology that, for example, is no longer available on portable computers. Here we propose a convenient USB device enabling parallel I/O capabilities. We tested this device against the PP on both a desktop and a laptop machine in different stress tests. Our data demonstrate the accuracy of our system, which suggests that it may be a good substitute for the PP with E-Prime.

Treatment and therapeutic monitoring of canine hypothyroidism.

PubMed

Dixon, R M; Reid, S W J; Mooney, C T

2002-08-01

Thirty-one dogs with spontaneous hypothyroidism were treated with thyroid hormone replacement therapy (THRT) and monitored for approximately three months. Good clinical and laboratory control was ultimately achieved in all cases with a mean L-thyroxine (T4) dose of 0.026 mg/kg administered once daily. There was a significant increase and decrease in circulating total T4 and canine thyroid stimulating hormone (cTSH) concentrations, respectively, after starting THRT. After commencing treatment, 11 cases subsequently required an increase and three cases required a decrease in dose to achieve optimal clinical control. Median (semi interquartile range [SIR]) circulating six-hour post-pill total T4 (53.6 [27.91 nmol/litre) and cTSH (0.03 [0] microg/litre) concentrations were significantly increased and decreased, respectively, in treated dogs that did not require a dose change; corresponding values in treated dogs in which an increase in dose was required were 29.3 (12.7) nmol/litre and 0.15 (0.62) microg/litre, respectively. However, circulating cTSH measurement was of limited value in assessing therapeutic control because, although increased values were associated with inadequate therapy, reference range cTSH values were common in inadequately treated dogs. Lethargy and mental demeanour were typically the first clinical signs to improve, with significant bodyweight reduction occurring within two weeks of commencing THRT. Routine clinicopathological monitoring was of value in confirming a general metabolic response to THRT, but was of limited value in accurately monitoring cases or tailoring therapy in individual cases.

Strategies to improve learning of all students in a class

NASA Astrophysics Data System (ADS)

Suraishkumar, G. K.

2018-05-01

The statistical distribution of the student learning abilities in a typical undergraduate engineering class poses a significant challenge to simultaneously improve the learning of all the students in the class. With traditional instruction styles, the students with significantly high learning abilities are not satisfied due to a feeling of unfulfilled potential, and the students with significantly low learning abilities feel lost. To address the challenge in an undergraduate core/required course on 'transport phenomena in biological systems', a combination of learning strategies such as active learning including co-operative group learning, challenge exercises, and others were employed in a pro-advising context. The short-term and long-term impacts were evaluated through student course performances and input, respectively. The results show that it is possible to effectively address the challenge posed by the distribution of student learning abilities in a class.

Safety Evaluation of Discontinuing Late-Night Flash Operations at Signalized Intersections : Summary Report

DOT National Transportation Integrated Search

2013-08-01

During late-night flash (LNF) mode (from late night to early morning hours), traffic signals flash yellow for one road (typically, the major road), requiring caution but no stopping, and flash red for the other road (typically, the minor road), requi...

Topical anaesthesia for needle-related pain in newborn infants.

PubMed

Foster, Jann P; Taylor, Christine; Spence, Kaye

2017-02-04

Hospitalised newborn neonates frequently undergo painful invasive procedures that involve penetration of the skin and other tissues by a needle. One intervention that can be used prior to a needle insertion procedure is application of a topical local anaesthetic. To evaluate the efficacy and safety of topical anaesthetics such as amethocaine and EMLA in newborn term or preterm infants requiring an invasive procedure involving puncture of skin and other tissues with a needle. We searched the Cochrane Central Register of Controlled Trials (CENTRAL), PubMed, Embase and CINAHL up to 15 May 2016; previous reviews including cross-references, abstracts, and conference proceedings. We contacted expert informants. We contacted authors directly to obtain additional data. We imposed no language restrictions. Randomised, quasi-randomised controlled trials, and cluster and cross-over randomised trials that compared the topical anaesthetics amethocaine and eutectic mixture of local anaesthetics (EMLA) in terms of anaesthetic efficacy and safety in newborn term or preterm infants requiring an invasive procedure involving puncture of skin and other tissues with a needle DATA COLLECTION AND ANALYSIS: From the reports of the clinical trials we extracted data regarding clinical outcomes including pain, number of infants with methaemoglobin level 5% and above, number of needle prick attempts prior to successful needle-related procedure, crying, time taken to complete the procedure, episodes of apnoea, episodes of bradycardia, episodes of oxygen desaturation, neurodevelopmental disability and other adverse events. Eight small randomised controlled trials met the inclusion criteria (n = 506). These studies compared either EMLA and placebo or amethocaine and placebo. No studies compared EMLA and amethocaine. We were unable to meta-analyse the outcome of pain due to differing outcome measures and methods of reporting. For EMLA, two individual studies reported a statistically significant reduction in pain compared to placebo during lumbar puncture and venepuncture. Three studies found no statistical difference between the groups during heel lancing. For amethocaine, three studies reported a statistically significant reduction in pain compared to placebo during venepuncture and one study reported a statistically significant reduction in pain compared to placebo during cannulation. One study reported no statistical difference between the two groups during intramuscular injection.One study reported no statistical difference between EMLA and the placebo group for successful venepuncture at first attempt. One study similarly reported no statistically significant difference between Amethocaine and the placebo group for successful cannulation at first attempt.Risk for local redness, swelling or blanching was significantly higher with EMLA (typical risk ratio (RR) 1.65, 95% confidence interval (CI) 1.24 to 2.19; typical risk difference (RD) 0.17, 95% CI 0.09 to 0.26; n = 272; number needed to treat for an additional harmful outcome (NNTH) 6, 95% CI 4 to 11; I 2 = 92% indicating considerable heterogeneity) although not for amethocaine (typical RR 2.11, 95% CI 0.72 to 6.16; typical RD 0.05, 95% CI -0.02 to 0.11, n = 221). These local skin reactions for EMLA and amethocaine were reported as short-lasting. Two studies reported no methaemoglobinaemia with single application of EMLA. The quality of the evidence on outcomes assessed according to GRADE was low to moderate. Overall, all the trials were small, and the effects of uncertain clinical significance. The evidence regarding the effectiveness or safety of the interventions studied is inadequate to support clinical recommendations. There has been no evaluation regarding any long-term effects of topical anaesthetics in newborn infants.High quality studies evaluating the efficacy and safety of topical anaesthetics such as amethocaine and EMLA for needle-related pain in newborn term or preterm infants are required. These studies should aim to determine efficacy of these topical anaesthetics and on homogenous groups of infants for gestational age. While there was no methaemoglobinaemia in the studies that reported methaemoglobin, the efficacy and safety of EMLA, especially in very preterm infants, and for repeated application, need to be further evaluated in future studies.

Association of Atypical Enteropathogenic Escherichia coli with Diarrhea and Related Mortality in Kittens

PubMed Central

Jacob, Megan E.; Flowers, James R.; Strong, Sandra J.; DebRoy, Chitrita

2017-01-01

ABSTRACT Diarrhea is responsible for the death of approximately 900,000 children per year worldwide. In children, typical enteropathogenic Escherichia coli (EPEC) is a common cause of diarrhea and is associated with a higher hazard of death. Typical EPEC infection is rare in animals and poorly reproduced in experimental animal models. In contrast, atypical EPEC (aEPEC) infection is common in both children and animals, but its role in diarrhea is uncertain. Mortality in kittens is often attributed to diarrhea, and we previously identified enteroadherent EPEC in the intestines of deceased kittens. The purpose of this study was to determine the prevalence and type of EPEC in kittens and whether infection was associated with diarrhea, diarrhea-related mortality, gastrointestinal pathology, or other risk factors. Kittens with and without diarrhea were obtained from two shelter facilities and determined to shed atypical EPEC at a culture-based prevalence of 18%. In contrast, quantitative PCR detected the presence of the gene for intimin (eae) in feces from 42% of kittens. aEPEC was isolated from kittens with and without diarrhea. However, kittens with diarrhea harbored significantly larger quantities of aEPEC than kittens without diarrhea. Kittens with aEPEC had a significantly greater severity of small intestinal and colonic lesions and were significantly more likely to have required subcutaneous fluid administration. These findings identify aEPEC to be prevalent in kittens and a significant primary or contributing cause of intestinal inflammation, diarrhea, dehydration, and associated mortality in kittens. PMID:28659315

Information System Requirements Determination: Factors Impeding Stakeholders from Reaching Common Understandings and Agreements on Requirements

ERIC Educational Resources Information Center

Gissel, Richard L.

2010-01-01

Information system implementations require developers to first know what they must create and then determine how best to create it. The requirements determination phase of the system development life cycle typically determines what functions a system must perform and how well it must accomplish required functions. Implementation success depends on…

Validating the Use of Deep Learning Neural Networks for Correction of Large Hydrometric Datasets

NASA Astrophysics Data System (ADS)

Frazier, N.; Ogden, F. L.; Regina, J. A.; Cheng, Y.

2017-12-01

Collection and validation of Earth systems data can be time consuming and labor intensive. In particular, high resolution hydrometric data, including rainfall and streamflow measurements, are difficult to obtain due to a multitude of complicating factors. Measurement equipment is subject to clogs, environmental disturbances, and sensor drift. Manual intervention is typically required to identify, correct, and validate these data. Weirs can become clogged and the pressure transducer may float or drift over time. We typically employ a graphical tool called Time Series Editor to manually remove clogs and sensor drift from the data. However, this process is highly subjective and requires hydrological expertise. Two different people may produce two different data sets. To use this data for scientific discovery and model validation, a more consistent method is needed to processes this field data. Deep learning neural networks have proved to be excellent mechanisms for recognizing patterns in data. We explore the use of Recurrent Neural Networks (RNN) to capture the patterns in the data over time using various gating mechanisms (LSTM and GRU), network architectures, and hyper-parameters to build an automated data correction model. We also explore the required amount of manually corrected training data required to train the network for reasonable accuracy. The benefits of this approach are that the time to process a data set is significantly reduced, and the results are 100% reproducible after training is complete. Additionally, we train the RNN and calibrate a physically-based hydrological model against the same portion of data. Both the RNN and the model are applied to the remaining data using a split-sample methodology. Performance of the machine learning is evaluated for plausibility by comparing with the output of the hydrological model, and this analysis identifies potential periods where additional investigation is warranted.

Detecting peroxiredoxin hyperoxidation by one-dimensional isoelectric focusing.

PubMed

Cao, Zhenbo; Bulleid, Neil J

The activity of typical 2-cys peroxiredoxin (Prxs) can be regulated by hyperoxidation with a consequent loss of redox activity. Here we developed a simple assay to monitor the level of hyperoxidation of different typical 2-cys prxs simultaneously. This assay only requires standard equipment and can compare different samples on the same gel. It requires much less time than conventional 2D gels and gives more information than Western blotting with an antibody specific for hyperoxidized peroxiredoxin. This method could also be used to monitor protein modification with a charge difference such as phosphorylation.

Energetic electron injections and dipolarization events in Mercury's magnetotail: Substorm dynamics

NASA Astrophysics Data System (ADS)

Dewey, R. M.; Slavin, J. A.; Raines, J. M.; Imber, S.; Baker, D. N.; Lawrence, D. J.

2017-12-01

Despite its small size, Mercury's terrestrial-like magnetosphere experiences brief, yet intense, substorm intervals characterized by features similar to at Earth: loading/unloading of the tail lobes with open magnetic flux, dipolarization of the magnetic field at the inner edge of the plasma sheet, and, the focus of this presentation, energetic electron injection. We use the Gamma-Ray Spectrometer's high-time resolution (10 ms) energetic electron measurements to determine the relationship between substorm activity and energetic electron injections coincident with dipolarization fronts in the magnetotail. These dipolarizations were detected on the basis of their rapid ( 2 s) increase in the northward component of the tail magnetic field (ΔBz 30 nT), which typically persists for 10 s. We estimate the typical flow channel to be 0.15 RM, planetary convection speed of 750 km/s, cross-tail potential drop of 7 kV, and flux transport of 0.08 MWb for each dipolarization event, suggesting multiple simultaneous and sequential dipolarizations are required to unload the >1 MWb of magnetic flux typically returned to the dayside magnetosphere during a substorm interval. Indeed, while we observe most dipolarization-injections to be isolated or in small chains of events (i.e., 1-3 events), intervals of sawtooth-like injections with >20 sequential events are also present. The typical separation between dipolarization-injection events is 10 s. Magnetotail dipolarization, in addition to being a powerful source of electron acceleration, also plays a significant role in the substorm process at Mercury.

The energy content of restaurant foods without stated calorie information.

PubMed

Urban, Lorien E; Lichtenstein, Alice H; Gary, Christine E; Fierstein, Jamie L; Equi, Ashley; Kussmaul, Carolyn; Dallal, Gerard E; Roberts, Susan B

2013-07-22

National recommendations for the prevention and treatment of obesity emphasize reducing energy intake through self-monitoring food consumption. However, little information is available on the energy content of foods offered by nonchain restaurants, which account for approximately 50% of restaurant locations in the United States. To measure the energy content of foods from independent and small-chain restaurants that do not provide stated information on energy content. We used bomb calorimetry to determine the dietary energy content of the 42 most frequently purchased meals from the 9 most common restaurant categories. Independent and small-chain restaurants were randomly selected, and 157 individual meals were analyzed. Area within 15 miles of downtown Boston. A random sample of independent and small-chain restaurants. Dietary energy. All meal categories provided excessive dietary energy. The mean energy content of individual meals was 1327 (95% CI, 1248-1406) kcal, equivalent to 66% of typical daily energy requirements. We found a significant effect of food category on meal energy (P ≤ .05), and 7.6% of meals provided more than 100% of typical daily energy requirements. Within-meal variability was large (average SD, 271 kcal), and we found no significant effect of restaurant establishment or size. In addition, meal energy content averaged 49% greater than those of popular meals from the largest national chain restaurants (P < .001) and in subset analyses contained 19% more energy than national food database information for directly equivalent items (P < .001). National chain restaurants have been criticized for offering meals with excess dietary energy. This study finds that independent and small-chain restaurants, which provide no nutrition information, also provide excessive dietary energy in amounts apparently greater than popular meals from chain restaurants or information in national food databases. A national requirement for accurate calorie labeling in all restaurants may discourage menus offering unhealthy portions and would allow consumers to make informed choices about ordering meals that promote weight gain and obesity.

Friction Stir Welding Development at NASA, Marshall Space Flight Center

NASA Technical Reports Server (NTRS)

McGill, Preston; Gentz, Steve (Technical Monitor)

2001-01-01

Friction stir welding (FSW) is a solid state process that pan be used to join materials without melting. The process was invented by The Welding Institute (TWI), Cambridge, England. Friction stir welding exhibits several advantages over fusion welding in that it produces welds with fewer defects and higher joint efficiency and is capable of joining alloys that are generally considered non-weldable with a fusion weld process. In 1994, NASA-Marshall began collaborating with TWI to transform FSW from a laboratory curiosity to a viable metal joining process suitable for manufacturing hardware. While teamed with TWI, NASA-Marshall began its own FSW research and development effort to investigate possible aerospace applications for the FSW process. The work involved nearly all aspects of FSW development, including process modeling, scale-up issues, applications to advanced materials and development of tooling to use FSW on components of the Space Shuttle with particular emphasis on aluminum tanks. The friction stir welding process involves spinning a pin-tool at an appropriate speed, plunging it into the base metal pieces to be joined, and then translating it along the joint of the work pieces. In aluminum alloys the rotating speed typically ranges from 200 to 400 revolutions per minute and the translation speed is approximately two to five inches per minute. The pin-tool is inserted at a small lead angle from the axis normal to the work piece and requires significant loading along the axis of the tool. An anvil or reaction structure is required behind the welded material to react the load along the axis of the pin tool. The process requires no external heat input, filler material, protective shielding gas or inert atmosphere typical of fusion weld processes. The FSW solid-state weld process has resulted in aluminum welds with significantly higher strengths, higher joint efficiencies and fewer defects than fusion welds used to join similar alloys.

Attention, Working Memory, and Grammaticality Judgment in Typical Young Adults

ERIC Educational Resources Information Center

Smith, Pamela A.

2011-01-01

Purpose: To examine resource allocation and sentence processing, this study examined the effects of auditory distraction on grammaticality judgment (GJ) of sentences varied by semantics (reversibility) and short-term memory requirements. Method: Experiment 1: Typical young adult females (N = 60) completed a whole-sentence GJ task in distraction…

18 CFR 707.8 - Typical classes of action requiring similar treatment under NEPA.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 2 2013-04-01 2012-04-01 true Typical classes of... Resources WATER RESOURCES COUNCIL COMPLIANCE WITH THE NATIONAL ENVIRONMENTAL POLICY ACT (NEPA) Water... submittal of regional water resources management plans (comprehensive, coordinated, joint plans or elements...

18 CFR 707.8 - Typical classes of action requiring similar treatment under NEPA.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 2 2012-04-01 2012-04-01 false Typical classes of... Resources WATER RESOURCES COUNCIL COMPLIANCE WITH THE NATIONAL ENVIRONMENTAL POLICY ACT (NEPA) Water... submittal of regional water resources management plans (comprehensive, coordinated, joint plans or elements...

18 CFR 707.8 - Typical classes of action requiring similar treatment under NEPA.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 2 2014-04-01 2014-04-01 false Typical classes of... Resources WATER RESOURCES COUNCIL COMPLIANCE WITH THE NATIONAL ENVIRONMENTAL POLICY ACT (NEPA) Water... submittal of regional water resources management plans (comprehensive, coordinated, joint plans or elements...

18 CFR 707.8 - Typical classes of action requiring similar treatment under NEPA.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 2 2011-04-01 2011-04-01 false Typical classes of... Resources WATER RESOURCES COUNCIL COMPLIANCE WITH THE NATIONAL ENVIRONMENTAL POLICY ACT (NEPA) Water... submittal of regional water resources management plans (comprehensive, coordinated, joint plans or elements...

18 CFR 707.8 - Typical classes of action requiring similar treatment under NEPA.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 2 2010-04-01 2010-04-01 false Typical classes of... Resources WATER RESOURCES COUNCIL COMPLIANCE WITH THE NATIONAL ENVIRONMENTAL POLICY ACT (NEPA) Water... submittal of regional water resources management plans (comprehensive, coordinated, joint plans or elements...

This image, looking south, shows a typical corridor in the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

This image, looking south, shows a typical corridor in the laboratory area of the building, where numerous pipes were required to carry the various utilities needed for procedure and safety equipment - Department of Energy, Mound Facility, Electronics Laboratory Building (E Building), One Mound Road, Miamisburg, Montgomery County, OH

Foot Forces during Treadmill Exercise on the International Space Station

NASA Technical Reports Server (NTRS)

Cavanagh, Peter R.; Rice, Andrea J.; Maender, Christian C.; Gopalakrishnan, Raghavan; Genc, Kerim O.; Kuklis, Matthew

2006-01-01

Exercise has been the primary countermeasure to combat musculoskeletal changes during the approximately 6 month missions to the International Space Station (ISS). However, these countermeasures have not been successful in preventing loss of bone mineral density in the spine and hip of astronauts. We examined lower extremity loading during typical bouts of on-orbit exercise performed by 4 ISS crew members on the ISS treadmill (TVIS) and during locomotor activities on earth (1g). In-shoe forces were monitored at 128Hz using force-measuring insoles placed inside the shoes of the exercising crewmember, stored temporarily on Flash cards, and down-linked via satellite for analysis. Custom software extracted peak forces from up to 30 minutes of locomotor activity. All on-orbit loading conditions for walking and running resulted in peak forces and impact loading rates that were significantly less than those measured in 1g. Typical single leg loads on-orbit in walking and running were 0.860 plus or minus 0.04 body weights (BW) and 1.339 plus or minus 0.07 BW compared to 1.2 plus or minus 0.036 BW and 2.36 plus or minus 0.07 BW in 1g BW respectively. These results indicate that typical exercise on the ISS treadmill does not generate 1g-like loading conditions. This may be partly responsible for the loss of bone mineral density that has been observed in these and other crew members. Since on-orbit treadmill exercise requires a restraining load to return the crew member to the treadmill surface, more studies are required to enable comfortable full body weight loading to be applied.

Key issues in the thermal design of spaceborne cryogenic infrared instruments

NASA Astrophysics Data System (ADS)

Schember, Helene R.; Rapp, Donald

1992-12-01

Thermal design and analysis play an integral role in the development of spaceborne cryogenic infrared (IR) instruments. From conceptual sketches to final testing, both direct and derived thermal requirements place significant constraints on the instrument design. Although in practice these thermal requirements are interdependent, the sources of most thermal constraints may be grouped into six distinct categories. These are: (1) Detector temperatures, (2) Optics temperatures, (3) Pointing or alignment stability, (4) Mission lifetime, (5) Orbit, and (6) Test and Integration. In this paper, we discuss these six sources of thermal requirements with particular regard to development of instrument packages for low background infrared astronomical observatories. In the end, the thermal performance of these instruments must meet a set of thermal requirements. The development of these requirements is typically an ongoing and interactive process, however, and the thermal design must maintain flexibility and robustness throughout the process. The thermal (or cryogenic) engineer must understand the constraints imposed by the science requirements, the specific hardware, the observing environment, the mission design, and the testing program. By balancing these often competing factors, the system-oriented thermal engineer can work together with the experiment team to produce an effective overall design of the instrument.

Policy-relevant behaviours predict heavier drinking and mediate the relationship with age, gender and education status: Analysis from the International Alcohol Control study.

PubMed

Casswell, Sally; Huckle, Taisia; Wall, Martin; Parker, Karl; Chaiyasong, Surasak; Parry, Charles D H; Viet Cuong, Pham; Gray-Phillip, Gaile; Piazza, Marina

2018-02-21

To investigate behaviours related to four alcohol policy variables (policy-relevant behaviours) and demographic variables in relation to typical quantities of alcohol consumed on-premise in six International Alcohol Control study countries. General population surveys with drinkers using a comparable survey instrument and data analysed using path analysis in an overall model and for each country. typical quantities per occasion consumed on-premise; gender, age; years of education, prices paid, time of purchase, time to access alcohol and liking for alcohol advertisements. In the overall model younger people, males and those with fewer years of education consumed larger typical quantities. Overall lower prices paid, later time of purchase and liking for alcohol ads predicted consuming larger typical quantities; this was found in the high-income countries, less consistently in the high-middle-income countries and not in the low middle-income country. Three policy-relevant behaviours (prices paid, time of purchase, liking for alcohol ads) mediated the relationships between age, gender, education and consumption in high-income countries. International Alcohol Control survey data showed a relationship between policy-relevant behaviours and typical quantities consumed and support the likely effect of policy change (trading hours, price and restrictions on marketing) on heavier drinking. The path analysis also revealed policy-relevant behaviours were significant mediating variables between the effect of age, gender and educational status on consumption. However, this relationship is clearest in high-income countries. Further research is required to understand better how circumstances in low-middle-income countries impact effects of policies. © 2018 The Authors Drug and Alcohol Review published by John Wiley & Sons Australia, Ltd on behalf of Australasian Professional Society on Alcohol and other Drugs.

Fulminant type 1 diabetes mellitus: a study of nine cases.

PubMed

Su, Xiao-Fei; Fu, Li-Yuan; Wu, Jin-Dan; Xu, Xiao-Hua; Li, Hui-Qin; Sun, Rui; Ye, Lei; Lee, Kok-Onn; Ma, Jian-Hua

2012-04-01

The study aims to explore the prevalence and clinical features of fulminant type 1 diabetes mellitus (F1DM). We analyzed 11,202 patients who were diagnosed having diabetes and admitted to the Department of Endocrinology, Nanjin First Hospital, Nanjin, China, from September 2005 to April 2011. Among 198 patients classified having type 1 diabetes mellitus (T1DM), nine patients were diagnosed having F1DM. Clinical features of F1DM were analyzed and compared with typical T1DM. The prevalence of F1DM was 4.5% (nine of 198 T1DM patients) in this study. F1DM patients had significantly high levels of random blood glucose (40±9 mmol/L). However, glycated hemoglobin (7.1±1.0%) and C-reactive peptide (0.21±0.15 μg/L) at 2 h postprandial were significantly lower in F1DM patients compared with typical T1DM patients. Six of them had flu-like symptoms. Five of them showed gastrointestinal symptoms. Three patients experienced disturbance of consciousness. However, none of these symptoms was found in patients with typical T1DM. A continuous intravenous insulin infusion therapy using a portable pump was given during the acute phase to control hyperglycemia and ketoacidosis. All F1DM patients survived after treatment. In this single hospital-based study, nine Chinese patients met the criteria for diagnosis of F1DM. Although F1DM may be fatal, prompt treatment is required and useful to rescue these patients.

Prototype wash water renovation system integration with government-furnished wash fixture

NASA Technical Reports Server (NTRS)

1984-01-01

The requirements of a significant quantity of proposed life sciences experiments in Shuttle payloads for available wash water to support cleansing operations has provided the incentive to develop a technique for wash water renovation. A prototype wash water waste renovation system which has the capability to process the waste water and return it to a state adequate for reuse in a typical cleansing fixture designed to support life science experiments was investigated. The resulting technology is to support other developments efforts pertaining to water reclamation by serving as a pretreatment step for subsequent reclamation procedures.

Design feasibility of an advanced technology supersonic cruise aircraft

NASA Technical Reports Server (NTRS)

Rowe, W. T.

1976-01-01

Research and development programs provide confidence that technology is in-hand to design an economically attractive, environmentally sound supersonic cruise aircraft for commercial operations. The principal results of studies and tests are described including those which define the selection of significant design features. These typically include the results of: (1) wind-tunnel tests, both subsonic and supersonic, (2) propulsion performance and acoustic tests on noise suppressors, including forward-flight effects, (3) studies of engine/airframe integration, which lead to the selection of engine cycles/sizes to meet future market, economic, and social requirements; and (4) structural testing.

Energetic composite and system with enhanced mechanical sensitivity to initiation of self-sustained reaction

DOEpatents

Gash, Alexander E [Brentwood, CA; Barbee, Jr., Troy W.

2012-05-29

An energetic composition and system using amassed energetic multilayer pieces which are formed from the division, such as for example by cutting, scoring, breaking, crushing, shearing, etc., of a mechanically activatable monolithic energetic multilayer(s) (e.g. macro-scale sheets of multilayer films), for enhancing the sensitivity of the energetic composite and system to mechanical initiation of self-sustained reaction. In particular, mechanical initiation of the energetic composition may be achieved with significantly lower mechanical energy inputs than that typically required for initiating the monolithic energetic multilayers from which it is derived.

Space Operations Center orbit altitude selection strategy

NASA Technical Reports Server (NTRS)

Indrikis, J.; Myers, H. L.

1982-01-01

The strategy for the operational altitude selection has to respond to the Space Operation Center's (SOC) maintenance requirements and the logistics demands of the missions to be supported by the SOC. Three orbit strategies are developed: two are constant altitude, and one variable altitude. In order to minimize the effect of atmospheric uncertainty the dynamic altitude method is recommended. In this approach the SOC will operate at the optimum altitude for the prevailing atmospheric conditions and logistics model, provided that mission safety constraints are not violated. Over a typical solar activity cycle this method produces significant savings in the overall logistics cost.

Management of chemical burns of the canine cornea

PubMed Central

Christmas, Richard

1991-01-01

Significant clinical signs and general principles of treatment for chemical burns of the canine cornea are presented using three typical case studies for illustration. Alkali burns are more common in dogs than acid burns. The sources of alkali in this study were soap, cement, and mortar dust. Common signs of chemical burns are ocular pain, corneal ulceration, tear film inadequacy, corneal edema, and marked corneal neovascularity. Successful treatment requires thorough ocular lavage, treatment for corneal ulceration, and adequate anti-inflammatory therapy when the corneal epithelium becomes intact. ImagesFigure 1.Figure 2.Figure 3.Figure 4.Figure 5. PMID:17423874

The Risk of Progressive Multifocal Leukoencephalopathy in the Biologic Era: Prevention and Management.

PubMed

Molloy, Eamonn S; Calabrese, Cassandra M; Calabrese, Leonard H

2017-02-01

Progressive multifocal leukoencephalopathy (PML) is a rare, typically fatal, demyelinating central nervous system infection caused by reactivation of the John Cunningham virus that generally occurs in immunosuppressed patients. With an evolving understanding of a greater clinical heterogeneity of PML and significant implications for therapy, PML should be considered in the differential diagnosis of neurologic presentations of rheumatic diseases. Increased awareness of PML among rheumatologists is required, as earlier diagnosis and restoration of immune function may improve the otherwise grim prognosis associated with PML. Copyright © 2016 Elsevier Inc. All rights reserved.

Methodology to Assess No Touch Audit Software Using Simulated Building Utility Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cheung, Howard; Braun, James E.; Langner, M. Rois

This report describes a methodology developed for assessing the performance of no touch building audit tools and presents results for an available tool. Building audits are conducted in many commercial buildings to reduce building energy costs and improve building operation. Because the audits typically require significant input obtained by building engineers, they are usually only affordable for larger commercial building owners. In an effort to help small building and business owners gain the benefits of an audit at a lower cost, no touch building audit tools have been developed to remotely analyze a building's energy consumption.

Haloperidol, a Novel Treatment for Cannabinoid Hyperemesis Syndrome.

PubMed

Witsil, Joanne C; Mycyk, Mark B

Cannabinoid hyperemesis syndrome (CHS) is typically unresponsive to conventional pharmacologic antiemetics, and patients often require excessive laboratory and radiographic testing and hospital admission. We report 4 cases of CHS that failed standard emergency department therapy but improved significantly after treatment with haloperidol. Although the exact mechanism for CHS remains unclear, dysregulation at cannabinoid type 1 seems to play a role. Recent animal data demonstrate complex interactions between dopamine and cannabinoid type 1 signaling, a potential mechanism for haloperidol success in patients with CHS. Our success with haloperidol in these 4 patients warrants further investigation of haloperidol as an emergency department treatment for CHS.

Probabilistic modeling of the indoor climates of residential buildings using EnergyPlus

DOE PAGES

Buechler, Elizabeth D.; Pallin, Simon B.; Boudreaux, Philip R.; ...

2017-04-25

The indoor air temperature and relative humidity in residential buildings significantly affect material moisture durability, HVAC system performance, and occupant comfort. Therefore, indoor climate data is generally required to define boundary conditions in numerical models that evaluate envelope durability and equipment performance. However, indoor climate data obtained from field studies is influenced by weather, occupant behavior and internal loads, and is generally unrepresentative of the residential building stock. Likewise, whole-building simulation models typically neglect stochastic variables and yield deterministic results that are applicable to only a single home in a specific climate. The

UCTM2: An updated User friendly Configurable Trigger, scaler and delay Module for nuclear and particle physics

NASA Astrophysics Data System (ADS)

Bourrion, O.; Boyer, B.; Derome, L.; Pignol, G.

2016-06-01

We developed a highly integrated and versatile electronic module to equip small nuclear physics experiments and lab teaching classes: the User friendly Configurable Trigger, scaler and delay Module for nuclear and particle physics (UCTM). It is configurable through a Graphical User Interface (GUI) and provides a large number of possible trigger conditions without any Hardware Description Language (HDL) required knowledge. This new version significantly enhances the previous capabilities by providing two additional features: signal digitization and time measurements. The design, performances and a typical application are presented.

Detecting Microbial Dysbiosis Associated with Pediatric Crohn Disease Despite the High Variability of the Gut Microbiota.

PubMed

Wang, Feng; Kaplan, Jess L; Gold, Benjamin D; Bhasin, Manoj K; Ward, Naomi L; Kellermayer, Richard; Kirschner, Barbara S; Heyman, Melvin B; Dowd, Scot E; Cox, Stephen B; Dogan, Haluk; Steven, Blaire; Ferry, George D; Cohen, Stanley A; Baldassano, Robert N; Moran, Christopher J; Garnett, Elizabeth A; Drake, Lauren; Otu, Hasan H; Mirny, Leonid A; Libermann, Towia A; Winter, Harland S; Korolev, Kirill S

2016-02-02

The relationship between the host and its microbiota is challenging to understand because both microbial communities and their environments are highly variable. We have developed a set of techniques based on population dynamics and information theory to address this challenge. These methods identify additional bacterial taxa associated with pediatric Crohn disease and can detect significant changes in microbial communities with fewer samples than previous statistical approaches required. We have also substantially improved the accuracy of the diagnosis based on the microbiota from stool samples, and we found that the ecological niche of a microbe predicts its role in Crohn disease. Bacteria typically residing in the lumen of healthy individuals decrease in disease, whereas bacteria typically residing on the mucosa of healthy individuals increase in disease. Our results also show that the associations with Crohn disease are evolutionarily conserved and provide a mutual information-based method to depict dysbiosis. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

Applying Knowledge of Species-Typical Scavenging Behavior to the Search and Recovery of Mammalian Skeletal Remains.

PubMed

Young, Alexandria; Stillman, Richard; Smith, Martin J; Korstjens, Amanda H

2016-03-01

Forensic investigations involving animal scavenging of human remains require a physical search of the scene and surrounding areas. However, there is currently no standard procedure in the U.K. for physical searches of scavenged human remains. The Winthrop and grid search methods used by police specialist searchers for scavenged remains were examined through the use of mock red fox (Vulpes vulpes) scatter scenes. Forty-two police specialist searchers from two different regions within the U.K. were divided between those briefed and not briefed with fox-typical scavenging information. Briefing searchers with scavenging information significantly affected the recovery of scattered bones (χ(2) = 11.45, df = 1, p = 0.001). Searchers briefed with scavenging information were 2.05 times more likely to recover bones. Adaptions to search methods used by searchers were evident on a regional level, such that searchers more accustom to a peri-urban to rural region recovered a higher percentage of scattered bones (58.33%, n = 84). © 2015 American Academy of Forensic Sciences.

Gas Ring-Imagining Cherenkov (GRINCH) Detector for the Super BigBite Spectrometer at Jefferson Lab

NASA Astrophysics Data System (ADS)

Averett, Todd; Wojtsekhowski, Bogdan; Amidouch, Abdellah; Danagoulian, Samuel; Niculescu, Gabriel; Niculescu, Ioana; Jefferson Lab SBS Collaboration Collaboration

2017-01-01

A new gas Cherenkov detector is under construction for the upcoming SuperBigBite spectrometer research program in Hall A at Jefferson Lab. The existing BigBite spectrometer is being upgraded to handle expected increases in event rate and background rate due to the increased luminosity required for the experimental program. The detector will primarily be used to separate good electron events from significant pion and electromagnetic contamination. In contrast to typical gas Cherenkov detectors that use large-diameter photomultiplier tubes and charge integrating ADCs, this detector uses an array of 510 small-diameter tubes that are more than 25x less sensitive to background. Cherenkov radiation clusters will be identified in this array using fast TDCs and a narrow timing window relative to typical ADC gates. In addition, a new FPGA-based DAQ system is being tested to provide a PID trigger using real-time cluster finding. Details of the detector and current status of the project will be presented.

Surface-engineered substrates for improved human pluripotent stem cell culture under fully defined conditions.

PubMed

Saha, Krishanu; Mei, Ying; Reisterer, Colin M; Pyzocha, Neena Kenton; Yang, Jing; Muffat, Julien; Davies, Martyn C; Alexander, Morgan R; Langer, Robert; Anderson, Daniel G; Jaenisch, Rudolf

2011-11-15

The current gold standard for the culture of human pluripotent stem cells requires the use of a feeder layer of cells. Here, we develop a spatially defined culture system based on UV/ozone radiation modification of typical cell culture plastics to define a favorable surface environment for human pluripotent stem cell culture. Chemical and geometrical optimization of the surfaces enables control of early cell aggregation from fully dissociated cells, as predicted from a numerical model of cell migration, and results in significant increases in cell growth of undifferentiated cells. These chemically defined xeno-free substrates generate more than three times the number of cells than feeder-containing substrates per surface area. Further, reprogramming and typical gene-targeting protocols can be readily performed on these engineered surfaces. These substrates provide an attractive cell culture platform for the production of clinically relevant factor-free reprogrammed cells from patient tissue samples and facilitate the definition of standardized scale-up friendly methods for disease modeling and cell therapeutic applications.

Early androgens, activity levels and toy choices of children in the second year of life.

PubMed

Alexander, Gerianne M; Saenz, Janet

2012-09-01

The hypothesis that stronger preferences for active play styles contribute to stronger preferences for male-typical toys was examined in 47 boys and 37 girls at 19-months of age using ambulatory monitoring technology (i.e., actigraphy) to measure activity levels during contact with male-typical, female-typical, and gender-neutral toys. Digit ratios and salivary testosterone levels were measured earlier in children at 3-4 months of age. There were no significant sex differences in digit ratios, salivary testosterone levels, or overall activity levels during toy play. In contrast, contact times showed large sex differences in infants' toy preferences. The within-sex comparisons showed that infant girls had significant preferences for female-typical toys over male-typical toys, whereas infant boys showed only a small preference for male-typical toys over female-typical toys. More male-typical digit ratios in early infancy predicted higher activity counts during toy play and less female-typical toy preferences in girls. However, in both sexes, activity levels were unrelated to toy preferences suggesting that factors other than activity level preferences contribute to the early emergence of gender-linked toy preferences. Copyright © 2012 Elsevier Inc. All rights reserved.

Treatment with olanzapine, risperidone or typical antipsychotic drugs in Asian patients with schizophrenia.

PubMed

Lee, Chul; Wu, Kuang-Hsien; Habil, Hussain; Dyachkova, Yulia; Lee, Phil

2006-05-01

To examine clinical outcomes in Asian patients with schizophrenia receiving monotherapy with olanzapine, risperidone or typical antipsychotics in naturalistic settings. In this report, data from the first 12 months of the prospective, observational, 3-year Intercontinental Schizophrenia Outpatient Health Outcomes study are presented for patients from participating Asian countries (Korea, Taiwan and Malaysia) who were started on, or switched to, monotherapy with olanzapine (n = 484), risperidone (n = 287) or a typical antipsychotic drug (n = 127) at baseline. At 12 months, overall reduction in the score of Clinical Global Impressions-Severity of Illness rating scale was greatest with olanzapine (p < 0.001 vs typical agents), followed by risperidone (p = 0.007 vs typical agents) treatment. Olanzapine treatment was found to have significantly better effects than typical agents on negative and depressive symptom scores, and significantly greater improvements than risperidone on negative and cognitive symptoms. The occurrence of extrapyramidal symptoms was least likely with olanzapine (p < 0.001 vs typical agents, and p = 0.012 vs risperidone), while the estimated odds of tardive dyskinesia were greatest in the typical treatment group (p = 0.046 vs olanzapine, and p = 0.082 vs risperidone). Mean weight increase was greater for olanzapine-treated patients compared with the other agents (p = 0.030 vs typical agents and p < 0.001 vs risperidone). The risk of menstrual disturbance was relatively high with risperidone when compared with olanzapine treatment (p < 0.001). The results of this observational study indicate that, in Asian patients with schizophrenia, olanzapine may offer benefits when compared with typical agents or risperidone. However, the significantly greater odds of weight gain should be considered in the clinical management of olanzapine-treated patients.

Significant Change Spotting for Periodic Human Motion Segmentation of Cleaning Tasks Using Wearable Sensors

PubMed Central

Liu, Kai-Chun; Chan, Chia-Tai

2017-01-01

The proportion of the aging population is rapidly increasing around the world, which will cause stress on society and healthcare systems. In recent years, advances in technology have created new opportunities for automatic activities of daily living (ADL) monitoring to improve the quality of life and provide adequate medical service for the elderly. Such automatic ADL monitoring requires reliable ADL information on a fine-grained level, especially for the status of interaction between body gestures and the environment in the real-world. In this work, we propose a significant change spotting mechanism for periodic human motion segmentation during cleaning task performance. A novel approach is proposed based on the search for a significant change of gestures, which can manage critical technical issues in activity recognition, such as continuous data segmentation, individual variance, and category ambiguity. Three typical machine learning classification algorithms are utilized for the identification of the significant change candidate, including a Support Vector Machine (SVM), k-Nearest Neighbors (kNN), and Naive Bayesian (NB) algorithm. Overall, the proposed approach achieves 96.41% in the F1-score by using the SVM classifier. The results show that the proposed approach can fulfill the requirement of fine-grained human motion segmentation for automatic ADL monitoring. PMID:28106853

Boiler and Pressure Balls Monopropellant Thermal Rocket Engine

NASA Technical Reports Server (NTRS)

Greene, William D. (Inventor)

2009-01-01

The proposed technology is a rocket engine cycle utilizing as the propulsive fluid a low molecular weight, cryogenic fluid, typically liquid hydrogen, pressure driven, heated, and expelled through a nozzle to generate high velocity and high specific impulse discharge gas. The proposed technology feeds the propellant through the engine cycle without the use of a separate pressurization fluid and without the use of turbomachinery. Advantages of the proposed technology are found in those elements of state-of-the-art systems that it avoids. It does not require a separate pressurization fluid or a thick-walled primary propellant tank as is typically required for a classical pressure-fed system. Further, it does not require the acceptance of intrinsic reliability risks associated with the use of turbomachinery

Interaction Support for Information Finding and Comparative Analysis in Online Video

ERIC Educational Resources Information Center

Xia, Jinyue

2017-01-01

Current online video interaction is typically designed with a focus on straightforward distribution and passive consumption of individual videos. This "click play, sit back and watch" context is typical of videos for entertainment. However, there are many task scenarios that require active engagement and analysis of video content as a…

An overview of smart grid routing algorithms

NASA Astrophysics Data System (ADS)

Wang, Junsheng; OU, Qinghai; Shen, Haijuan

2017-08-01

This paper summarizes the typical routing algorithm in smart grid by analyzing the communication business and communication requirements of intelligent grid. Mainly from the two kinds of routing algorithm is analyzed, namely clustering routing algorithm and routing algorithm, analyzed the advantages and disadvantages of two kinds of typical routing algorithm in routing algorithm and applicability.

The Representational Status of Pretence: Evidence from Typical Development and Autism

ERIC Educational Resources Information Center

Jarrold, Christopher; Mansergh, Ruth; Whiting, Claire

2010-01-01

The question of whether understanding pretend play requires meta-representational skill was examined among typically developing children and individuals with autism. Participants were presented with closely equated true and false pretence trials in which they had to judge a protagonist's pretend reading of a situation, which either matched or…

An Energy-Based Hysteresis Model for Magnetostrictive Transducers

NASA Technical Reports Server (NTRS)

Calkins, F. T.; Smith, R. C.; Flatau, A. B.

1997-01-01

This paper addresses the modeling of hysteresis in magnetostrictive transducers. This is considered in the context of control applications which require an accurate characterization of the relation between input currents and strains output by the transducer. This relation typically exhibits significant nonlinearities and hysteresis due to inherent properties of magnetostrictive materials. The characterization considered here is based upon the Jiles-Atherton mean field model for ferromagnetic hysteresis in combination with a quadratic moment rotation model for magnetostriction. As demonstrated through comparison with experimental data, the magnetization model very adequately quantifies both major and minor loops under various operating conditions. The combined model can then be used to accurately characterize output strains at moderate drive levels. The advantages to this model lie in the small number (six) of required parameters and the flexibility it exhibits in a variety of operating conditions.

A minimax technique for time-domain design of preset digital equalizers using linear programming

NASA Technical Reports Server (NTRS)

Vaughn, G. L.; Houts, R. C.

1975-01-01

A linear programming technique is presented for the design of a preset finite-impulse response (FIR) digital filter to equalize the intersymbol interference (ISI) present in a baseband channel with known impulse response. A minimax technique is used which minimizes the maximum absolute error between the actual received waveform and a specified raised-cosine waveform. Transversal and frequency-sampling FIR digital filters are compared as to the accuracy of the approximation, the resultant ISI and the transmitted energy required. The transversal designs typically have slightly better waveform accuracy for a given distortion; however, the frequency-sampling equalizer uses fewer multipliers and requires less transmitted energy. A restricted transversal design is shown to use the least number of multipliers at the cost of a significant increase in energy and loss of waveform accuracy at the receiver.

Medical students as hospice volunteers: the benefits to a hospice organization.

PubMed

Setla, Judith; Watson, Linda

2006-01-01

Hospices have regulatory requirements to provide volunteers who can assist families in a variety of ways. Hospices also typically provide large amounts of uncompensated education for students in various life sciences as part of their mission to promote quality care for those at the end-of-life. Separately, there is evidence of the educational benefits of exposing medical students to hospice patients and practices. But little has been published about the costs or benefits such teaching programs incur at the hospices involved. Hospice of Central New York developed a service-learning elective where first-year medical students were trained as volunteers. Despite initial concerns that significant staff time would be required to develop and maintain this elective, it appears to be an efficient way to satisfy the need for volunteers while contributing to the education of the involved students.

Complications of Bariatric Surgery: What You Can Expect to See in Your GI Practice.

PubMed

Schulman, Allison R; Thompson, Christopher C

2017-11-01

Obesity is one of the most significant health problems worldwide. Bariatric surgery has become one of the fastest growing operative procedures and has gained acceptance as the leading option for weight-loss. Despite improvement in the performance of bariatric surgical procedures, complications are not uncommon. There are a number of unique complications that arise in this patient population and require specific knowledge for proper management. Furthermore, conditions unrelated to the altered anatomy typically require a different management strategy. As such, a basic understanding of surgical anatomy, potential complications, and endoscopic tools and techniques for optimal management is essential for the practicing gastroenterologist. Gastroenterologists should be familiar with these procedures and complication management strategies. This review will cover these topics and focus on major complications that gastroenterologists will be most likely to see in their practice.

[Q:] When would you prefer a SOSSAGE to a SAUSAGE? [A:] At about 100 msec. ERP correlates of orthographic typicality and lexicality in written word recognition.

PubMed

Hauk, O; Patterson, K; Woollams, A; Watling, L; Pulvermüller, F; Rogers, T T

2006-05-01

Using a speeded lexical decision task, event-related potentials (ERPs), and minimum norm current source estimates, we investigated early spatiotemporal aspects of cortical activation elicited by words and pseudo-words that varied in their orthographic typicality, that is, in the frequency of their component letter pairs (bi-grams) and triplets (tri-grams). At around 100 msec after stimulus onset, the ERP pattern revealed a significant typicality effect, where words and pseudo-words with atypical orthography (e.g., yacht, cacht) elicited stronger brain activation than items characterized by typical spelling patterns (cart, yart). At approximately 200 msec, the ERP pattern revealed a significant lexicality effect, with pseudo-words eliciting stronger brain activity than words. The two main factors interacted significantly at around 160 msec, where words showed a typicality effect but pseudo-words did not. The principal cortical sources of the effects of both typicality and lexicality were localized in the inferior temporal cortex. Around 160 msec, atypical words elicited the stronger source currents in the left anterior inferior temporal cortex, whereas the left perisylvian cortex was the site of greater activation to typical words. Our data support distinct but interactive processing stages in word recognition, with surface features of the stimulus being processed before the word as a meaningful lexical entry. The interaction of typicality and lexicality can be explained by integration of information from the early form-based system and lexicosemantic processes.

Hemodynamic guidelines for design and control of a turbodynamic pediatric ventricular assist device.

PubMed

Uber, Bronwyn E; Webber, Steven A; Morell, Victor O; Antaki, James F

2006-01-01

The design of mechanical circulatory support devices typically requires a priori knowledge of the hemodynamic requirements of their intended use. These requirements are difficult to determine because of limited clinical experience. This is especially true for the pediatric population, for whom there is a dearth of longitudinal data. This report aims to provide both engineers and physicians with benchmarks for determining the optimal flow requirements and settings for pediatric ventricular assist devices that are currently being developed. Criteria were developed on the basis of estimates derived from various sources. The potential patient population was estimated by using the prevalence of children on the heart transplant waiting list and those placed on extracorporeal membrane oxygenation. Cardiac outputs were determined for individual weights and body surface areas, using published values for healthy and sick pediatric patients. The recommended pump range was optimized to include the most patients, while considering the design constraints. This study identifies a significant population of patients who would benefit from a device providing 0.52 to 1.92 l/min.

Design analysis of levitation facility for space processing applications. [Skylab program, space shuttles

NASA Technical Reports Server (NTRS)

Frost, R. T.; Kornrumpf, W. P.; Napaluch, L. J.; Harden, J. D., Jr.; Walden, J. P.; Stockhoff, E. H.; Wouch, G.; Walker, L. H.

1974-01-01

Containerless processing facilities for the space laboratory and space shuttle are defined. Materials process examples representative of the most severe requirements for the facility in terms of electrical power, radio frequency equipment, and the use of an auxiliary electron beam heater were used to discuss matters having the greatest effect upon the space shuttle pallet payload interfaces and envelopes. Improved weight, volume, and efficiency estimates for the RF generating equipment were derived. Results are particularly significant because of the reduced requirements for heat rejection from electrical equipment, one of the principal envelope problems for shuttle pallet payloads. It is shown that although experiments on containerless melting of high temperature refractory materials make it desirable to consider the highest peak powers which can be made available on the pallet, total energy requirements are kept relatively low by the very fast processing times typical of containerless experiments and allows consideration of heat rejection capabilities lower than peak power demand if energy storage in system heat capacitances is considered. Batteries are considered to avoid a requirement for fuel cells capable of furnishing this brief peak power demand.

Expanding the Availability of Lightweight Aluminum Alloy Armor Plate Procured from Detailed Military Specifications

NASA Astrophysics Data System (ADS)

Doherty, Kevin; Squillacioti, Richard; Cheeseman, Bryan; Placzankis, Brian; Gallardy, Denver

For many years, the range of aluminum alloys for armor plate applications obtainable in accordance with detailed military specifications was very limited. However, the development of improved aluminum alloys for aerospace and other applications has provided an opportunity to modernize the Army portfolio for ground vehicle armor applications. While the benefits of offering additional alloy choices to vehicle designers is obvious, the process of creating detailed military specifications for armor plate applications is not trivial. A significant amount of material and testing is required to develop the details required by an armor plate specification. Due to the vast number of material programs that require standardization and with a limited amount of manpower and funds as a result of Standardization Reform in 1995, one typically requires a need statement from a vehicle program office to justify and sponsor the work. This presentation will focus on recent aluminum alloy armor plate specifications that have added capability to vehicle designers' selection of armor materials that offer possible benefits such as lower cost, higher strength, better ballistic and corrosion resistance, improved weldability, etc.

Geostationary Platforms Mission and Payload Requirements study. Volume 2: Technical

NASA Technical Reports Server (NTRS)

1979-01-01

The possibility of using geostationary platforms to provide communications and other services was examined. Detailed data on the payload and housekeeping requirements of selected communications missions and one typical noncommunications mission are presented.

Separation of metadata and pixel data to speed DICOM tag morphing.

PubMed

Ismail, Mahmoud; Philbin, James

2013-01-01

The DICOM information model combines pixel data and metadata in single DICOM object. It is not possible to access the metadata separately from the pixel data. There are use cases where only metadata is accessed. The current DICOM object format increases the running time of those use cases. Tag morphing is one of those use cases. Tag morphing includes deletion, insertion or manipulation of one or more of the metadata attributes. It is typically used for order reconciliation on study acquisition or to localize the issuer of patient ID (IPID) and the patient ID attributes when data from one domain is transferred to a different domain. In this work, we propose using Multi-Series DICOM (MSD) objects, which separate metadata from pixel data and remove duplicate attributes, to reduce the time required for Tag Morphing. The time required to update a set of study attributes in each format is compared. The results show that the MSD format significantly reduces the time required for tag morphing.

Tackling the challenges of fully immersive head-mounted AR devices

NASA Astrophysics Data System (ADS)

Singer, Wolfgang; Hillenbrand, Matthias; Münz, Holger

2017-11-01

The optical requirements of fully immersive head mounted AR devices are inherently determined by the human visual system. The etendue of the visual system is large. As a consequence, the requirements for fully immersive head-mounted AR devices exceeds almost any high end optical system. Two promising solutions to achieve the large etendue and their challenges are discussed. Head-mounted augmented reality devices have been developed for decades - mostly for application within aircrafts and in combination with a heavy and bulky helmet. The established head-up displays for applications within automotive vehicles typically utilize similar techniques. Recently, there is the vision of eyeglasses with included augmentation, offering a large field of view, and being unobtrusively all-day wearable. There seems to be no simple solution to reach the functional performance requirements. Known technical solutions paths seem to be a dead-end, and some seem to offer promising perspectives, however with severe limitations. As an alternative, unobtrusively all-day wearable devices with a significantly smaller field of view are already possible.

ATTDES: An Expert System for Satellite Attitude Determination and Control. 2

NASA Technical Reports Server (NTRS)

Mackison, Donald L.; Gifford, Kevin

1996-01-01

The design, analysis, and flight operations of satellite attitude determintion and attitude control systems require extensive mathematical formulations, optimization studies, and computer simulation. This is best done by an analyst with extensive education and experience. The development of programs such as ATTDES permit the use of advanced techniques by those with less experience. Typical tasks include the mission analysis to select stabilization and damping schemes, attitude determination sensors and algorithms, and control system designs to meet program requirements. ATTDES is a system that includes all of these activities, including high fidelity orbit environment models that can be used for preliminary analysis, parameter selection, stabilization schemes, the development of estimators covariance analyses, and optimization, and can support ongoing orbit activities. The modification of existing simulations to model new configurations for these purposes can be an expensive, time consuming activity that becomes a pacing item in the development and operation of such new systems. The use of an integrated tool such as ATTDES significantly reduces the effort and time required for these tasks.

Micrometeoroid and Lunar Secondary Ejecta Flux Measurements: Comparison of Three Acoustic Systems

NASA Technical Reports Server (NTRS)

Corsaro, R. D.; Giovane, F.; Liou, Jer-Chyi; Burtchell, M.; Pisacane, V.; Lagakos, N.; Williams, E.; Stansbery, E.

2010-01-01

This report examines the inherent capability of three large-area acoustic sensor systems and their applicability for micrometeoroids (MM) and lunar secondary ejecta (SE) detection and characterization for future lunar exploration activities. Discussion is limited to instruments that can be fabricated and deployed with low resource requirements. Previously deployed impact detection probes typically have instrumented capture areas less than 0.2 square meters. Since the particle flux decreases rapidly with increased particle size, such small-area sensors rarely encounter particles in the size range above 50 microns, and even their sampling the population above 10 microns is typically limited. Characterizing the sparse dust population in the size range above 50 microns requires a very large-area capture instrument. However it is also important that such an instrument simultaneously measures the population of the smaller particles, so as to provide a complete instantaneous snapshot of the population. For lunar or planetary surface studies, the system constraints are significant. The instrument must be as large as possible to sample the population of the largest MM. This is needed to reliably assess the particle impact risks and to develop cost-effective shielding designs for habitats, astronauts, and critical instrument. The instrument should also have very high sensitivity to measure the flux of small and slow SE particles. is the SE environment is currently poorly characterized, and possess a contamination risk to machinery and personnel involved in exploration. Deployment also requires that the instrument add very little additional mass to the spacecraft. Three acoustic systems are being explored for this application.

LENS: web-based lens for enrichment and network studies of human proteins

PubMed Central

2015-01-01

Background Network analysis is a common approach for the study of genetic view of diseases and biological pathways. Typically, when a set of genes are identified to be of interest in relation to a disease, say through a genome wide association study (GWAS) or a different gene expression study, these genes are typically analyzed in the context of their protein-protein interaction (PPI) networks. Further analysis is carried out to compute the enrichment of known pathways and disease-associations in the network. Having tools for such analysis at the fingertips of biologists without the requirement for computer programming or curation of data would accelerate the characterization of genes of interest. Currently available tools do not integrate network and enrichment analysis and their visualizations, and most of them present results in formats not most conducive to human cognition. Results We developed the tool Lens for Enrichment and Network Studies of human proteins (LENS) that performs network and pathway and diseases enrichment analyses on genes of interest to users. The tool creates a visualization of the network, provides easy to read statistics on network connectivity, and displays Venn diagrams with statistical significance values of the network's association with drugs, diseases, pathways, and GWASs. We used the tool to analyze gene sets related to craniofacial development, autism, and schizophrenia. Conclusion LENS is a web-based tool that does not require and download or plugins to use. The tool is free and does not require login for use, and is available at http://severus.dbmi.pitt.edu/LENS. PMID:26680011

Overview of paediatric obesity for the paediatric mental health provider.

PubMed

Scheimann, Ann O

2012-06-01

Childhood obesity represents a significant challenge for paediatric healthcare delivery. As obesity rates increase, obese children and adolescents are at significant risk for the development of a myriad of medical and surgical problems as well as mental health problems. Moreover, children with mental health problems are increasingly presenting to their psychiatrists with obesity. Treatment of paediatric obesity requires a multidisciplinary approach with incorporation of the family into the treatment plan although still typically only offering suboptimal results. Paediatric providers from all disciplines should focus efforts primarily on obesity prevention and encouragement of healthy lifestyles, while incorporating treatment for obesity when such efforts fail. The goals of this article are to provide an overview of the epidemiology, pathophysiology, genetics, clinical features and treatment strategies for paediatric obesity.

Evaluation of Data-Logging Transducer to Passively Collect Pressure Vessel p/T History

NASA Technical Reports Server (NTRS)

Wnuk, Stephen P.; Le, Son; Loew, Raymond A.

2013-01-01

Pressure vessels owned and operated by NASA are required to be regularly certified per agency policy. Certification requires an assessment of damage mechanisms and an estimation of vessel remaining life. Since detail service histories are not typically available for most pressure vessels, a conservative estimate of vessel pressure/temperature excursions is typically used in assessing fatigue life. This paper details trial use of a data-logging transducer to passively obtain actual pressure and temperature service histories of pressure vessels. The approach was found to have some potential for cost savings and other benefits in certain cases.

Atmospheric, Magnetospheric and Plasmas in Space (AMPS) spacelab payload definition study - program analysis and planning for phase C/D document - Volume 7

NASA Technical Reports Server (NTRS)

Keeley, J. T.

1976-01-01

Typical missions identified for AMPS flights in the arly 1980's are described. Experiment objectives and typical scientific instruments selected to accomplish these objectives are discussed along with mission requirements and shuttle and Spacelab capabilities assessed to determine any AMPS unique requirements. Preliminary design concepts for the first two AMPS flights form the basis for the Phase C/D program plan. This plan implements flights 1 and 2 and indicates how both the scientific and flight support hardware can be systematically evolved for future AMPS flights.

Nonlinear spectral mixture effects for photosynthetic/non-photosynthetic vegetation cover estimates of typical desert vegetation in western China.

PubMed

Ji, Cuicui; Jia, Yonghong; Gao, Zhihai; Wei, Huaidong; Li, Xiaosong

2017-01-01

Desert vegetation plays significant roles in securing the ecological integrity of oasis ecosystems in western China. Timely monitoring of photosynthetic/non-photosynthetic desert vegetation cover is necessary to guide management practices on land desertification and research into the mechanisms driving vegetation recession. In this study, nonlinear spectral mixture effects for photosynthetic/non-photosynthetic vegetation cover estimates are investigated through comparing the performance of linear and nonlinear spectral mixture models with different endmembers applied to field spectral measurements of two types of typical desert vegetation, namely, Nitraria shrubs and Haloxylon. The main results were as follows. (1) The correct selection of endmembers is important for improving the accuracy of vegetation cover estimates, and in particular, shadow endmembers cannot be neglected. (2) For both the Nitraria shrubs and Haloxylon, the Kernel-based Nonlinear Spectral Mixture Model (KNSMM) with nonlinear parameters was the best unmixing model. In consideration of the computational complexity and accuracy requirements, the Linear Spectral Mixture Model (LSMM) could be adopted for Nitraria shrubs plots, but this will result in significant errors for the Haloxylon plots since the nonlinear spectral mixture effects were more obvious for this vegetation type. (3) The vegetation canopy structure (planophile or erectophile) determines the strength of the nonlinear spectral mixture effects. Therefore, no matter for Nitraria shrubs or Haloxylon, the non-linear spectral mixing effects between the photosynthetic / non-photosynthetic vegetation and the bare soil do exist, and its strength is dependent on the three-dimensional structure of the vegetation canopy. The choice of linear or nonlinear spectral mixture models is up to the consideration of computational complexity and the accuracy requirement.

Nonlinear spectral mixture effects for photosynthetic/non-photosynthetic vegetation cover estimates of typical desert vegetation in western China

PubMed Central

Jia, Yonghong; Gao, Zhihai; Wei, Huaidong

2017-01-01

Desert vegetation plays significant roles in securing the ecological integrity of oasis ecosystems in western China. Timely monitoring of photosynthetic/non-photosynthetic desert vegetation cover is necessary to guide management practices on land desertification and research into the mechanisms driving vegetation recession. In this study, nonlinear spectral mixture effects for photosynthetic/non-photosynthetic vegetation cover estimates are investigated through comparing the performance of linear and nonlinear spectral mixture models with different endmembers applied to field spectral measurements of two types of typical desert vegetation, namely, Nitraria shrubs and Haloxylon. The main results were as follows. (1) The correct selection of endmembers is important for improving the accuracy of vegetation cover estimates, and in particular, shadow endmembers cannot be neglected. (2) For both the Nitraria shrubs and Haloxylon, the Kernel-based Nonlinear Spectral Mixture Model (KNSMM) with nonlinear parameters was the best unmixing model. In consideration of the computational complexity and accuracy requirements, the Linear Spectral Mixture Model (LSMM) could be adopted for Nitraria shrubs plots, but this will result in significant errors for the Haloxylon plots since the nonlinear spectral mixture effects were more obvious for this vegetation type. (3) The vegetation canopy structure (planophile or erectophile) determines the strength of the nonlinear spectral mixture effects. Therefore, no matter for Nitraria shrubs or Haloxylon, the non-linear spectral mixing effects between the photosynthetic / non-photosynthetic vegetation and the bare soil do exist, and its strength is dependent on the three-dimensional structure of the vegetation canopy. The choice of linear or nonlinear spectral mixture models is up to the consideration of computational complexity and the accuracy requirement. PMID:29240777

QUICR-learning for Multi-Agent Coordination

NASA Technical Reports Server (NTRS)

Agogino, Adrian K.; Tumer, Kagan

2006-01-01

Coordinating multiple agents that need to perform a sequence of actions to maximize a system level reward requires solving two distinct credit assignment problems. First, credit must be assigned for an action taken at time step t that results in a reward at time step t > t. Second, credit must be assigned for the contribution of agent i to the overall system performance. The first credit assignment problem is typically addressed with temporal difference methods such as Q-learning. The second credit assignment problem is typically addressed by creating custom reward functions. To address both credit assignment problems simultaneously, we propose the "Q Updates with Immediate Counterfactual Rewards-learning" (QUICR-learning) designed to improve both the convergence properties and performance of Q-learning in large multi-agent problems. QUICR-learning is based on previous work on single-time-step counterfactual rewards described by the collectives framework. Results on a traffic congestion problem shows that QUICR-learning is significantly better than a Q-learner using collectives-based (single-time-step counterfactual) rewards. In addition QUICR-learning provides significant gains over conventional and local Q-learning. Additional results on a multi-agent grid-world problem show that the improvements due to QUICR-learning are not domain specific and can provide up to a ten fold increase in performance over existing methods.

Salvage of Combat Hindfoot Fractures in 2003-2014 UK Military.

PubMed

Bennett, Philippa M; Stevenson, Thomas; Sargeant, Ian D; Mountain, Alistair; Penn-Barwell, Jowan G

2017-07-01

Hindfoot fractures pose a considerable challenge to military orthopaedic surgeons, as combat injuries are typically the result of energy transfers not seen in civilian practice. This study aimed to characterize the pattern of hindfoot injuries sustained by UK military casualties in recent conflicts, define the early amputation and infection rate, and identify factors associated with poor early outcomes. The UK Joint Theatre Trauma Registry was searched for British military casualties sustaining a hindfoot fracture from Iraq and Afghanistan between 2003 and 2014. Data on the injury pattern and management were obtained along with 18-month follow-up data. Statistical analysis was performed with the chi-square test and binomial logistic regression analysis. The threshold for significance was set at P < .05. One hundred fourteen patients sustained 134 hindfoot injuries. Eighteen-month follow-up was available for 92 patients (81%) and 114 hindfeet (85%). The calcaneus was fractured in 116 cases (87%): 54 (47%) were managed conservatively, 32 (28%) underwent K-wire fixation, and 30 (26%) underwent internal fixation. Nineteen patients (17%) required transtibial amputation during this time. A deep infection requiring operative treatment occurred in 13 cases (11%) with Staphylococcus aureus, the most common infectious organism (46%). A deep infection was strongly associated with operative fracture management ( P = .0016). When controlling for multiple variables, the presence of a deep infection was significantly associated with a requirement for amputation at 18 months ( P = .023). There was no association between open fractures and a requirement for amputation at 18 months ( P = .640), nor was conservative management associated with a requirement for amputation ( P = .999). Thirty-six fractures (32%) required unplanned revision surgery within the first 18 months following salvage, of which 19 (53%) involved amputation. A deep infection was the sole variable significantly associated with a requirement for amputation by 18 months. These results suggest that attempts at salvaging these injuries are at the limits of orthopaedic technical feasibility. Level III, comparative series.

Use of electroluminescence technology for highway signage.

DOT National Transportation Integrated Search

2001-09-30

Laboratory work will be combined with reviews of highway signage protocols, requirements and : potential applications that will lead to prototype design requirements for a typical highway sign that : should have the potential to improve safety for th...

Mapping of multiple parameter m-health scenarios to mobile WiMAX QoS variables.

PubMed

Alinejad, Ali; Philip, N; Istepanian, R S H

2011-01-01

Multiparameter m-health scenarios with bandwidth demanding requirements will be one of key applications in future 4 G mobile communication systems. These applications will potentially require specific spectrum allocations with higher quality of service requirements. Furthermore, one of the key 4 G technologies targeting m-health will be medical applications based on WiMAX systems. Hence, it is timely to evaluate such multiple parametric m-health scenarios over mobile WiMAX networks. In this paper, we address the preliminary performance analysis of mobile WiMAX network for multiparametric telemedical scenarios. In particular, we map the medical QoS to typical WiMAX QoS parameters to optimise the performance of these parameters in typical m-health scenario. Preliminary performance analyses of the proposed multiparametric scenarios are evaluated to provide essential information for future medical QoS requirements and constraints in these telemedical network environments.

An integrated power/attitude control system /IPACS/ for space vehicle application

NASA Technical Reports Server (NTRS)

Anderson, W. W.; Keckler, C. R.

1973-01-01

An integrated power and attitude control system (IPACS) concept with potential application to a broad class of space missions is discussed. The concept involves the storage and supply on demand of electrical energy in rotating flywheels while simultaneously providing control torques by controlled precession of the flywheels. The system is thus an alternative to the storage batteries used on present spacecraft while providing similar capability for attitude control as that represented by a control moment gyroscope (CMG) system. Potential IPACS configurations discussed include single- and double-rotor double-gimbal IPACS units. Typical sets of control laws which would manage the momentum and energy exchange between the IPACS and a typical space vehicle are discussed. Discussion of a simulation of a typical potential IPACS configuration and candidate mission concerned with pointing capability, power supply and demand flow, and discussion of the interactions between stabilization and control requirements and power flow requirements are presented.

Comparative Evaluation of Biomass Power Generation Systems in China Using Hybrid Life Cycle Inventory Analysis

PubMed Central

Liu, Huacai; Yin, Xiuli; Wu, Chuangzhi

2014-01-01

There has been a rapid growth in using agricultural residues as an energy source to generate electricity in China. Biomass power generation (BPG) systems may vary significantly in technology, scale, and feedstock and consequently in their performances. A comparative evaluation of five typical BPG systems has been conducted in this study through a hybrid life cycle inventory (LCI) approach. Results show that requirements of fossil energy savings, and greenhouse gas (GHG) emission reductions, as well as emission reductions of SO2 and NOx, can be best met by the BPG systems. The cofiring systems were found to behave better than the biomass-only fired system and the biomass gasification systems in terms of energy savings and GHG emission reductions. Comparing with results of conventional process-base LCI, an important aspect to note is the significant contribution of infrastructure, equipment, and maintenance of the plant, which require the input of various types of materials, fuels, services, and the consequent GHG emissions. The results demonstrate characteristics and differences of BPG systems and help identify critical opportunities for biomass power development in China. PMID:25383383

An improved genetic algorithm for designing optimal temporal patterns of neural stimulation

NASA Astrophysics Data System (ADS)

Cassar, Isaac R.; Titus, Nathan D.; Grill, Warren M.

2017-12-01

Objective. Electrical neuromodulation therapies typically apply constant frequency stimulation, but non-regular temporal patterns of stimulation may be more effective and more efficient. However, the design space for temporal patterns is exceedingly large, and model-based optimization is required for pattern design. We designed and implemented a modified genetic algorithm (GA) intended for design optimal temporal patterns of electrical neuromodulation. Approach. We tested and modified standard GA methods for application to designing temporal patterns of neural stimulation. We evaluated each modification individually and all modifications collectively by comparing performance to the standard GA across three test functions and two biophysically-based models of neural stimulation. Main results. The proposed modifications of the GA significantly improved performance across the test functions and performed best when all were used collectively. The standard GA found patterns that outperformed fixed-frequency, clinically-standard patterns in biophysically-based models of neural stimulation, but the modified GA, in many fewer iterations, consistently converged to higher-scoring, non-regular patterns of stimulation. Significance. The proposed improvements to standard GA methodology reduced the number of iterations required for convergence and identified superior solutions.

A high-speed linear algebra library with automatic parallelism

NASA Technical Reports Server (NTRS)

Boucher, Michael L.

1994-01-01

Parallel or distributed processing is key to getting highest performance workstations. However, designing and implementing efficient parallel algorithms is difficult and error-prone. It is even more difficult to write code that is both portable to and efficient on many different computers. Finally, it is harder still to satisfy the above requirements and include the reliability and ease of use required of commercial software intended for use in a production environment. As a result, the application of parallel processing technology to commercial software has been extremely small even though there are numerous computationally demanding programs that would significantly benefit from application of parallel processing. This paper describes DSSLIB, which is a library of subroutines that perform many of the time-consuming computations in engineering and scientific software. DSSLIB combines the high efficiency and speed of parallel computation with a serial programming model that eliminates many undesirable side-effects of typical parallel code. The result is a simple way to incorporate the power of parallel processing into commercial software without compromising maintainability, reliability, or ease of use. This gives significant advantages over less powerful non-parallel entries in the market.

Comparative evaluation of biomass power generation systems in China using hybrid life cycle inventory analysis.

PubMed

Liu, Huacai; Yin, Xiuli; Wu, Chuangzhi

2014-01-01

There has been a rapid growth in using agricultural residues as an energy source to generate electricity in China. Biomass power generation (BPG) systems may vary significantly in technology, scale, and feedstock and consequently in their performances. A comparative evaluation of five typical BPG systems has been conducted in this study through a hybrid life cycle inventory (LCI) approach. Results show that requirements of fossil energy savings, and greenhouse gas (GHG) emission reductions, as well as emission reductions of SO2 and NOx, can be best met by the BPG systems. The cofiring systems were found to behave better than the biomass-only fired system and the biomass gasification systems in terms of energy savings and GHG emission reductions. Comparing with results of conventional process-base LCI, an important aspect to note is the significant contribution of infrastructure, equipment, and maintenance of the plant, which require the input of various types of materials, fuels, services, and the consequent GHG emissions. The results demonstrate characteristics and differences of BPG systems and help identify critical opportunities for biomass power development in China.

Quality- and dilution losses in the recycling of ferrous materials from end-of-life passenger cars: input-output analysis under explicit consideration of scrap quality.

PubMed

Nakamura, Shinichiro; Kondo, Yasushi; Matsubae, Kazuyo; Nakajima, Kenichi; Tasaki, Tomohiro; Nagasaka, Tetsuya

2012-09-04

Metals can in theory be infinitely recycled in a closed-loop without any degradation in quality. In reality, however, open-loop recycling is more typical for metal scrap recovered from end-of-life (EoL) products because mixing of different metal species results in scrap quality that no longer matches the originals. Further losses occur when meeting the quality requirement of the target product requires dilution of the secondary material by adding high purity materials. Standard LCA usually does not address these losses. This paper presents a novel approach to quantifying quality- and dilution losses, by means of hybrid input-output analysis. We focus on the losses associated with the recycling of ferrous materials from end-of-life vehicle (ELV) due to the mixing of copper, a typical contaminant in steel recycling. Given the quality of scrap in terms of copper density, the model determines the ratio by which scrap needs to be diluted in an electric arc furnace (EAF), and the amount of demand for EAF steel including those quantities needed for dilution. Application to a high-resolution Japanese IO table supplemented with data on ferrous materials including different grades of scrap indicates that a nationwide avoidance of these losses could result in a significant reduction of CO(2) emissions.

Generating large misalignments in gapped and binary discs

NASA Astrophysics Data System (ADS)

Owen, James E.; Lai, Dong

2017-08-01

Many protostellar gapped and binary discs show misalignments between their inner and outer discs; in some cases, ˜70° misalignments have been observed. Here, we show that these misalignments can be generated through a secular resonance between the nodal precession of the inner disc and the precession of the gap-opening (stellar or massive planetary) companion. An evolving protostellar system may naturally cross this resonance during its lifetime due to disc dissipation and/or companion migration. If resonance crossing occurs on the right time-scale, of the order of a few million years, characteristic for young protostellar systems, the inner and outer discs can become highly misaligned, with misalignments ≳ 60° typical. When the primary star has a mass of order a solar mass, generating a significant misalignment typically requires the companion to have a mass of ˜0.01-0.1 M⊙ and an orbital separation of tens of astronomical units. The recently observed companion in the cavity of the gapped, highly misaligned system HD 142527 satisfies these requirements, indicating that a previous resonance crossing event misaligned the inner and outer discs. Our scenario for HD 142527's misaligned discs predicts that the companion's orbital plane is aligned with the outer disc's; this prediction should be testable with future observations as the companion's orbit is mapped out. Misalignments observed in several other gapped disc systems could be generated by the same secular resonance mechanism.

41 CFR 102-36.35 - What is the typical process for disposing of excess personal property?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What is the typical... agency property or by obtaining excess property from other federal agencies in lieu of new procurements... eligible non-federal activities. Title 40 of the United States Code requires that surplus personal property...

Association of Atypical Enteropathogenic Escherichia coli with Diarrhea and Related Mortality in Kittens.

PubMed

Watson, Victoria E; Jacob, Megan E; Flowers, James R; Strong, Sandra J; DebRoy, Chitrita; Gookin, Jody L

2017-09-01

Diarrhea is responsible for the death of approximately 900,000 children per year worldwide. In children, typical enteropathogenic Escherichia coli (EPEC) is a common cause of diarrhea and is associated with a higher hazard of death. Typical EPEC infection is rare in animals and poorly reproduced in experimental animal models. In contrast, atypical EPEC (aEPEC) infection is common in both children and animals, but its role in diarrhea is uncertain. Mortality in kittens is often attributed to diarrhea, and we previously identified enteroadherent EPEC in the intestines of deceased kittens. The purpose of this study was to determine the prevalence and type of EPEC in kittens and whether infection was associated with diarrhea, diarrhea-related mortality, gastrointestinal pathology, or other risk factors. Kittens with and without diarrhea were obtained from two shelter facilities and determined to shed atypical EPEC at a culture-based prevalence of 18%. In contrast, quantitative PCR detected the presence of the gene for intimin ( eae ) in feces from 42% of kittens. aEPEC was isolated from kittens with and without diarrhea. However, kittens with diarrhea harbored significantly larger quantities of aEPEC than kittens without diarrhea. Kittens with aEPEC had a significantly greater severity of small intestinal and colonic lesions and were significantly more likely to have required subcutaneous fluid administration. These findings identify aEPEC to be prevalent in kittens and a significant primary or contributing cause of intestinal inflammation, diarrhea, dehydration, and associated mortality in kittens. Copyright © 2017 American Society for Microbiology.

The Role of Subsurface Water in Carving Hesperian Amphitheater-Headed Valleys

NASA Astrophysics Data System (ADS)

Lapotre, M. G. A.; Lamb, M. P.

2017-12-01

Groundwater sapping may play a role in valley formation in rare cases on Earth, typically in sand or weakly cemented sandstones. Small-scale valleys resulting from groundwater seepage in loose sand typically have amphitheater-shaped canyon heads with roughly uniform widths. By analogy to terrestrial sapping valleys, Hesperian-aged amphitheater canyons on Mars have been interpreted to result from groundwater sapping, with implications for subsurface and surface water flows on ancient Mars. However, other studies suggest that martian amphitheater canyons carved in fractured rock may instead result from large overland floods, by analogy to dry cataracts in scabland terrains in the northwestern U.S. Understanding the formation of bedrock canyons is critical to our understanding of liquid water reservoirs on ancient Mars. Can groundwater sapping carve canyons in substrates other than sand? There is currently no model to predict the necessary conditions for groundwater to carve canyons in substrates ranging from loose sediment of various sizes to competent rock. To bridge this knowledge gap, we formulate a theoretical model coupling equations of groundwater flow and sediment transport that can be applied to a wide range of substrates. The model is used to infer whether groundwater sapping could have carved canyons in the absence of overland flows, and requires limited inputs that are measureable in the field or from orbital images. Model results show that sapping erosion is capable of forming canyons, but only in loose well-sorted sand. Coarser sediment is more permeable, but more difficult to transport. Finer sediment is more easily transported, but lower permeability precludes the necessary seepage discharge. Finally, fractured rock is highly permeable, but seepage discharges are far below those required to transport typical talus boulders. Using orbiter-based lithological constraints, we conclude that canyons near Echus Chasma are carved into bedrock and therefore required high-discharge overland flow during formation. These results have implications for Hesperian hydrology; while water volumes to carve sapping versus flood canyons need not be significantly different, erosion rates are orders of magnitude faster in the flood scenario, implying brief periods of abundant surface water on Hesperian Mars.

Re-Assessing Leaching Requirements for the Salinity Control under New Irrigation Regimes

NASA Astrophysics Data System (ADS)

Wu, Laosheng; Yang, Ting; Šimůnek, Jirka

2017-04-01

Irrigation is essential to sustain agricultural production, but it adds dissolved salts (or salinity) to croplands. Leaching is thus necessary to keep the average rootzone salinity below the plant threshold EC levels in order to sustain crop production. Current leaching requirement (LR) calculation is based on steady-state, one-dimensional (1D), and water balance approaches, which often overestimates the LRs under transient field conditions. While in recent years, surface and sprinkler irrigated fields have been largely converted to drip or micro-spray systems and deficit irrigation has become more popular, currently accepted LRs may not be appropriate for these irrigation systems. Under point or line irrigation sources (e.g., drips or drip-lines), water and salts move both downwards and laterally, which may lead to highly saline areas on the edges of the wetted area. Under such circumstances, processes such as precipitation/dissolution of mineral phases and/or cation exchange may significantly affect the leaching requirement. The overall objective of this research was to use computer simulation models (i.e., Hydrus-2D and UnsatChem) to evaluate LRs under transient conditions and new irrigation regimes. Simulations were carried out using parameters for soils, climate zones, and major crops and their corresponding fertilization practices typical for California to: (1) Assess the effects of salt precipitation/dissolution on the leaching requirement (LR); (2) Evaluate localized water movement on average rootzone salinity and the leaching requirement (LR); (3) Evaluate leaching requirements for soils under deficit irrigation; and (4) Assess the effects of rainfall on the leaching requirement. Information from this research could significantly impact water management practices in irrigated croplands.

14 CFR § 1216.306 - Actions normally requiring an EIS.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) § 1216.306 Actions normally requiring an EIS. (a) NASA will prepare an EIS for actions with the potential...) Typical NASA actions normally requiring an EIS include: (1) Development and operation of new launch... using a total quantity of radioactive material greater than the quantity for which the NASA Nuclear...

Alternative Methods for Assessing Contaminant Transport from the Vadose Zone to Indoor Air

NASA Astrophysics Data System (ADS)

Baylor, K. J.; Lee, A.; Reddy, P.; Plate, M.

2010-12-01

Vapor intrusion, which is the transport of contaminant vapors from groundwater and the vadose zone to indoor air, has emerged as a significant human health risk near hazardous waste sites. Volatile organic compounds (VOCs) such as trichloroethylene (TCE) and tetrachloroethylene (PCE) can volatilize from groundwater and from residual sources in the vadose zone and enter homes and commercial buildings through cracks in the slab, plumbing conduits, or other preferential pathways. Assessment of the vapor intrusion pathway typically requires collection of groundwater, soil gas, and indoor air samples, a process which can be expensive and time-consuming. We evaluated three alternative vapor intrusion assessment methods, including 1) use of radon as a surrogate for vapor intrusion, 2) use of pressure differential measurements between indoor/outdoor and indoor/subslab to assess the potential for vapor intrusion, and 3) use of passive, longer-duration sorbent methods to measure indoor air VOC concentrations. The primary test site, located approximately 30 miles south of San Francisco, was selected due to the presence of TCE (10 - 300 ug/L) in shallow groundwater (5 to 10 feet bgs). At this test site, we found that radon was not a suitable surrogate to asses vapor intrusion and that pressure differential measurements are challenging to implement and equipment-intensive. More significantly, we found that the passive, longer-duration sorbent methods are easy to deploy and compared well quantitatively with standard indoor air sampling methods. The sorbent technique is less than half the cost of typical indoor air methods, and also provides a longer duration sample, typically 3 to 14 days rather than 8 to 24 hours for standard methods. The passive sorbent methods can be a reliable, cost-effective, and easy way to sample for TCE, PCE and other VOCs as part of a vapor intrusion investigation.

Correlational study on atmospheric concentrations of fine particulate matter and children cough variant asthma.

PubMed

Zhang, Y-X; Liu, Y; Xue, Y; Yang, L-Y; Song, G-D; Zhao, L

2016-06-01

We explored the relationship between atmospheric concentrations of fine particulate matter and children cough variant asthma. 48 children all diagnosed with cough variant asthma were placed in the cough asthma group while 50 children suffering from typical asthma were place in typical asthma group. We also had 50 cases of chronic pneumonia (the pneumonia group) and 50 cases of healthy children (the control group). We calculated the average PM 2.5 and temperature values during spring, summer, autumn and winter and monitored serum lymphocyte ratio, CD4+/CD8+T, immunoglobulin IgE, ventilatory index and high-sensitivity C-reactive protein (hs-CRP) levels. Our results showed that PM 2.5 values in spring and winter were remarkably higher compared to other seasons. Correlated analysis demonstrated that the onset of cough asthma group was happening in spring. The onset of typical asthma group happened mostly in winter, followed by spring. We established a positive correlation between the onset of asthma of cough asthma group and PM 2.5 value (r = 0.623, p = 0.017), and there was also a positive correlation between the onset of asthma of typical asthma group and PM 2.5 value (r = 0.714, p = 0.015). Our results showed that lymphocyte ratio and IgE level in the cough asthma group and the typical asthma group were significantly higher. CD4+/CD8+T was significantly lower in the cough asthma group and the typical asthma group. The hs-CRP level in cough asthma, typical asthma and pneumonia groups were significantly higher than that of the control group. The FEV1/predicted value, FEV1/FVC and MMEF/predicted value in the cough asthma group and the typical asthma group were significantly lower than those in other groups, however when comparing between two groups respectively, the difference was not statistically significant. Our findings showed that PM2.5 was related to the onset of children cough variant asthma. PM2.5 reduced immune regulation and ventilatory function.

Event-Based Processing of Neutron Scattering Data

DOE PAGES

Peterson, Peter F.; Campbell, Stuart I.; Reuter, Michael A.; ...

2015-09-16

Many of the world's time-of-flight spallation neutrons sources are migrating to the recording of individual neutron events. This provides for new opportunities in data processing, the least of which is to filter the events based on correlating them with logs of sample environment and other ancillary equipment. This paper will describe techniques for processing neutron scattering data acquired in event mode that preserve event information all the way to a final spectrum, including any necessary corrections or normalizations. This results in smaller final errors, while significantly reducing processing time and memory requirements in typical experiments. Results with traditional histogramming techniquesmore » will be shown for comparison.« less

Impact of Site Elevation on Mg Smelter Design

NASA Astrophysics Data System (ADS)

Baker, Phillip W.

Site elevation has many surprising and significant impacts on the engineering design of metallurgical plant of all types. Electrolytic magnesium smelters maybe built at high elevation for a variety of reasons including availability of raw material, energy or electric power. Because of the unit processes they typically involve, Mg smelters can be extensively impacted by site elevation. In this paper, generic examples of the design changes required to adapt a smelter originally designed for sea level to operate at 2700 m are presented. While the examples are drawn from a magnesium plant design case, these changes are generically applicable to all industrial plants utilizing similar unit processes irrespective of product.

Atmospheric entry probes for outer planet exploration. Outer planet entry probe technical summary

NASA Technical Reports Server (NTRS)

1974-01-01

The use of unmanned space probes for investigating the conditions existing on and around the outer planets of the solar system is discussed. The subjects included in the report are: (1) the design of a common entry probe for outer planet missions, (2) the significant trades related to the development of a common probe design, (3) the impact of bus selection on probe design, (4) the impact of probe requirements on bus modifications, and (5) the key technology elements recommended for advanced development. Drawings and illustrations of typical probes are included to show the components and systems used in the space probes.

GEH-4-42, 47; Hot pressed, I and E cooled fuel element irradiation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neidner, R.

1959-11-02

In our continual effort to improve the present fuel elements which are irradiated in the numerous Hanford reactors, we have made what we believe to be a significant improvement in the hot pressing process for jacketing uranium fuel slugs. We are proposing a large scale evaluation testing program in the Hanford reactors but need the vital and basic information on the operating characteristics of this type slug under known and controlled operating conditions. We, therefore, have prepared two typical fuel slugs and will want them irradiated to about 1000 MWD/T exposure (this will require about four to five total cycles).

High strength air-dried aerogels

DOEpatents

Coronado, Paul R.; Satcher, Jr., Joe H.

2012-11-06

A method for the preparation of high strength air-dried organic aerogels. The method involves the sol-gel polymerization of organic gel precursors, such as resorcinol with formaldehyde (RF) in aqueous solvents with R/C ratios greater than about 1000 and R/F ratios less than about 1:2.1. Using a procedure analogous to the preparation of resorcinol-formaldehyde (RF) aerogels, this approach generates wet gels that can be air dried at ambient temperatures and pressures. The method significantly reduces the time and/or energy required to produce a dried aerogel compared to conventional methods using either supercritical solvent extraction. The air dried gel exhibits typically less than 5% shrinkage.

Ensuring Support for Research and Quality Improvement (QI) Networks: Four Pillars of Sustainability-An Emerging Framework.

PubMed

Holve, Erin

2013-01-01

Multi-institutional research and quality improvement (QI) projects using electronic clinical data (ECD) hold great promise for improving quality of care and patient outcomes but typically require significant infrastructure investments both to initiate and maintain the project over its duration. Consequently, it is important for these projects to think holistically about sustainability to ensure their long-term success. Four "pillars" of sustainability are discussed based on the experiences of EDM Forum grantees and other research and QI networks. These include trust and value, governance, management, and financial and administrative support. Two "foundational considerations," adaptive capacity and policy levers, are also discussed.

Fully Integral, Flexible Composite Driveshaft

NASA Technical Reports Server (NTRS)

Lawrie, Duncan

2014-01-01

An all-composite driveshaft incorporating integral flexible diaphragms was developed for prime contractor testing. This new approach makes obsolete the split lines required to attach metallic flex elements and either metallic or composite spacing tubes in current solutions. Subcritical driveshaft weights can be achieved that are half that of incumbent technology for typical rotary wing shaft lengths. Spacing tubes compose an integral part of the initial tooling but remain part of the finished shaft and control natural frequencies and torsional stability. A concurrently engineered manufacturing process and design for performance competes with incumbent solutions at significantly lower weight and with the probability of improved damage tolerance and fatigue life.

Radiofrequency Ablation of Uterine Fibroids: a Review.

PubMed

Lee, Bruce B; Yu, Steve P

2016-01-01

Laparoscopic, ultrasound-guided radiofrequency ablation (RFA) is a new, FDA-cleared uterine sparing, outpatient procedure for uterine fibroids. The procedure utilizes recent technological advancements in instrumentation and imaging, allowing surgeons to treat numerous fibroids of varying size and location in a minimally invasive fashion. Early and mid-term data from multi-center clinical trials have demonstrated safety and efficacy, with resolution or improvement of symptoms and significant volume reduction. Re-intervention rates for fibroid symptoms have been low. The procedure is well tolerated with a typically uneventful and rapid recovery requiring NSAIDs only for postoperative pain. While post RFA pregnancy data are limited, the results are promising.

What does industry need in the way of meteorology for air pollution problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crow, L.W.

1978-01-01

A discussion covers information which should be supplied to the consulting meteorologist; typical requests made by industrial concerns of various consultants; feeding meteorological data to models; the use of meteorological information in developing prevention of significant deterioration requirements; sources of error, e.g., assuming that digital values have a higher validity than the original analog records; the need for industrial concerns to develop sets of site-specific data; and the greater liability of air flow and stability frequencies estimated by professional meteorologists than transposed historical data from the nearest airport station for use as model input to make preliminary planning decisions.

Special Considerations for Qualifying Thin Films for Supper Pressure Pumpkin Ultra Long Duration Balloon (ULDB) Missions

NASA Astrophysics Data System (ADS)

Said, M.

Pumpkin type super pressure balloons require much less stringent mechanical requirements on the envelope film material when compared to spherical super pressure type balloons. However, since suitable thin films are typically viscoelastic in nature, their creep characteristics must be fully characterized and must not exceed specific and predetermined design limits. Proper assessment of materials limits to meet these design limits requires creep-load-temperature data that characterizes the performance of the material over a time that exceeds the duration of the design service life by some specified margin. Contrary to the behavior of materials with purely elastic response, visco-elastic materials such as these considered for the ULDB design, change their geometry under sustained loading over time. This change is usually reflected by exhibiting a significant visco-elastic component over the service life of the mission. For that regime of large visco-elastic response, where the material is highly nonlinear, a certain load-temperature threshold can be reached where the creep is limited by an asymptote that depends on both the temperature and load level. Such creep is recoverable, although the recovery period may be much longer than the 100 day design service life of the ULDB structure plus the factor of safety required for the design. For a typical flight, the most significant creep occurs at the highest temperature, which also produces the highest internal pressure. At mid- latitudes a significant portion of the service life is spent at night, i.e. at low temperature and low load; for the ULDB film, this nighttime contribution to creep is insignificant in comparison to any daytime contribution. By contrast, flight exposure in an Antarctic summer is at an almost constant high temperature and corresponding high pressure. This response behavior must be sufficiently characterized to serve the needs of the structural design and performance predictions of the vehicle in service. In this work, a special emphasis will be given to the creep and dynamic characteristics of selected coextruded films and their dependence on the loading level and temperature. Preliminary testing has suggested t at the creep behavior of theh coextruded linear low density resin films is highly dependent on temperature and that the dynamic response depends on the make up of the composite film. In addition, the paper will, in general, highlight the process of qualify ing thin films for the pumpkin class of super pressure balloons.

Elasticity in portion selection is predicted by severity of anorexia and food type in adolescents.

PubMed

Herzog, M; Douglas, C R; Kissileff, H R; Brunstrom, J M; Halmi, K A

2016-08-01

The size of portions that people select is an indicator of underlying mechanisms controlling food intake. Fears of eating excessive portions drive down the sizes of portions patients with anorexia nervosa (AN) can tolerate eating significantly below those of healthy controls (HC) (Kissileff et al., 2016). To determine whether patients with AN will also reduce the sizes of typical or ideal portions below those of controls, ANOVA was used to compare maximum tolerable, typical, and ideal portions of four foods (potatoes, rice, pizza, and M&M's) in the same group of 24 adolescent AN patients and 10 healthy adolescent controls (HC), on which only the maximal portion data were previously reported. Typical and ideal portion sizes did not differ on any food for AN, but for HC, typical portions sizes (kcals) became larger than ideal as the energy density of the food increased, and were significant for the most energy dense food. Ideal portions of low energy dense foods were the same for AN as for in HC. There was a significant 3-way (group × food × portion type) interaction, such that HC selected larger maximum than typical portions only for pizza. We therefore proposed that individuals of certain groups, depending on the food, can be flexible in the amounts of food chosen to be eaten. We call this difference between maximum-tolerable, and typical portion sizes selected "elasticity." Elasticity was significantly smaller for AN patients compared to HC for pizza and was significantly inversely correlated with severity of illness. This index could be useful for clinical assessment of AN patients, and those with eating problems such as in obesity and bulimia nervosa and tracking their response to treatment. Copyright © 2016 Elsevier Ltd. All rights reserved.

Easy Leaf Area: Automated digital image analysis for rapid and accurate measurement of leaf area.

PubMed

Easlon, Hsien Ming; Bloom, Arnold J

2014-07-01

Measurement of leaf areas from digital photographs has traditionally required significant user input unless backgrounds are carefully masked. Easy Leaf Area was developed to batch process hundreds of Arabidopsis rosette images in minutes, removing background artifacts and saving results to a spreadsheet-ready CSV file. • Easy Leaf Area uses the color ratios of each pixel to distinguish leaves and calibration areas from their background and compares leaf pixel counts to a red calibration area to eliminate the need for camera distance calculations or manual ruler scale measurement that other software methods typically require. Leaf areas estimated by this software from images taken with a camera phone were more accurate than ImageJ estimates from flatbed scanner images. • Easy Leaf Area provides an easy-to-use method for rapid measurement of leaf area and nondestructive estimation of canopy area from digital images.

Pesticides, Neurodevelopmental Disagreement, and Bradford Hill's Guidelines.

PubMed

Shrader-Frechette, Kristin; ChoGlueck, Christopher

2016-06-27

Neurodevelopmental disorders such as autism affect one-eighth of all U.S. newborns. Yet scientists, accessing the same data and using Bradford-Hill guidelines, draw different conclusions about the causes of these disorders. They disagree about the pesticide-harm hypothesis, that typical United States prenatal pesticide exposure can cause neurodevelopmental damage. This article aims to discover whether apparent scientific disagreement about this hypothesis might be partly attributable to questionable interpretations of the Bradford-Hill causal guidelines. Key scientists, who claim to employ Bradford-Hill causal guidelines, yet fail to accept the pesticide-harm hypothesis, fall into errors of trimming the guidelines, requiring statistically-significant data, and ignoring semi-experimental evidence. However, the main scientists who accept the hypothesis appear to commit none of these errors. Although settling disagreement over the pesticide-harm hypothesis requires extensive analysis, this article suggests that at least some conflicts may arise because of questionable interpretations of the guidelines.

Optimally designing games for behavioural research

PubMed Central

Rafferty, Anna N.; Zaharia, Matei; Griffiths, Thomas L.

2014-01-01

Computer games can be motivating and engaging experiences that facilitate learning, leading to their increasing use in education and behavioural experiments. For these applications, it is often important to make inferences about the knowledge and cognitive processes of players based on their behaviour. However, designing games that provide useful behavioural data are a difficult task that typically requires significant trial and error. We address this issue by creating a new formal framework that extends optimal experiment design, used in statistics, to apply to game design. In this framework, we use Markov decision processes to model players' actions within a game, and then make inferences about the parameters of a cognitive model from these actions. Using a variety of concept learning games, we show that in practice, this method can predict which games will result in better estimates of the parameters of interest. The best games require only half as many players to attain the same level of precision. PMID:25002821

Legal and Ethical Considerations in Allowing Parental Exemptions From Newborn Critical Congenital Heart Disease (CCHD) Screening.

PubMed

Hom, Lisa A; Silber, Tomas J; Ennis-Durstine, Kathleen; Hilliard, Mary Anne; Martin, Gerard R

2016-01-01

Critical congenital heart disease (CCHD) screening is rapidly becoming the standard of care in the United States after being added to the Recommended Uniform Screening Panel (RUSP) in 2011. Newborn screens typically do not require affirmative parental consent. In fact, most states allow parents to exempt their baby from receiving the required screen on the basis of religious or personally held beliefs. There are many ethical considerations implicated with allowing parents to exempt their child from newborn screening for CCHD. Considerations include the treatment of religious exemptions in our current legal system, as well as medical and ethical principles in relation to the rights of infants. Although there are significant benefits to screening newborns for CCHD, when a parent refuses for religious or personal beliefs, in the case of CCHD screening, the parental decision should stand.

Alkali-Activated Geopolymers: A Literature Review

DTIC Science & Technology

2010-07-01

Typical Fly Ash Composition (%) [32] .................................................................................... 15 3. Typical Geopolymer ... geopolymer matrix. Fly ash composition is generally measured and evaluated by the percentage of existing elements present in the by-product...pozzolan bear great significance to the strength potential of a given geopolymer specimen. Table 2. Typical Fly Ash Composition (%) [32

HAN-Based Monopropellant Propulsion System with Applications

NASA Technical Reports Server (NTRS)

Jankovsky, Robert S.; Oleson, Steven R.

1997-01-01

NASA is developing a new monopropellant propulsion system for small, cost-driven spacecraft with AV requirements in the range of 10-150 m/sec. This system is based on a hydroxylammonium nitrate (HAN)/water/fuel monopropellant blend which is extremely dense, environmentally benign, and promises good performance and simplicity. State-of-art (SOA) small spacecraft typically employ either hydrazine or high pressure stored gas. Herein, a 'typical' small satellite bus is used to illustrate how a HAN-based monopropellant propulsion system fulfills small satellite propulsion requirements by providing mass and/or volume savings of SOA hydrazine monopropellants with the cost benefits of a stored nitrogen gas.

Evolution of user analysis on the grid in ATLAS

NASA Astrophysics Data System (ADS)

Dewhurst, A.; Legger, F.; ATLAS Collaboration

2017-10-01

More than one thousand physicists analyse data collected by the ATLAS experiment at the Large Hadron Collider (LHC) at CERN through 150 computing facilities around the world. Efficient distributed analysis requires optimal resource usage and the interplay of several factors: robust grid and software infrastructures, and system capability to adapt to different workloads. The continuous automatic validation of grid sites and the user support provided by a dedicated team of expert shifters have been proven to provide a solid distributed analysis system for ATLAS users. Typical user workflows on the grid, and their associated metrics, are discussed. Measurements of user job performance and typical requirements are also shown.

Teaching Perspective-Taking Skills to Typically Developing Children through Derived Relational Responding

ERIC Educational Resources Information Center

Heagle, Amie I.; Rehfeldt, Ruth Anne

2006-01-01

Perspective-taking is an ability that requires a child to emit a selection response of informational states in himself or herself and in others. This study used an extended version of the Barnes-Holmes protocol developed in a series of studies by McHugh, Barnes-Holmes, and Barnes-Holmes (2004) to teach typically developing children between the…

Compressing Aviation Data in XML Format

NASA Technical Reports Server (NTRS)

Patel, Hemil; Lau, Derek; Kulkarni, Deepak

2003-01-01

Design, operations and maintenance activities in aviation involve analysis of variety of aviation data. This data is typically in disparate formats making it difficult to use with different software packages. Use of a self-describing and extensible standard called XML provides a solution to this interoperability problem. XML provides a standardized language for describing the contents of an information stream, performing the same kind of definitional role for Web content as a database schema performs for relational databases. XML data can be easily customized for display using Extensible Style Sheets (XSL). While self-describing nature of XML makes it easy to reuse, it also increases the size of data significantly. Therefore, transfemng a dataset in XML form can decrease throughput and increase data transfer time significantly. It also increases storage requirements significantly. A natural solution to the problem is to compress the data using suitable algorithm and transfer it in the compressed form. We found that XML-specific compressors such as Xmill and XMLPPM generally outperform traditional compressors. However, optimal use of Xmill requires of discovery of optimal options to use while running Xmill. This, in turn, depends on the nature of data used. Manual disc0ver.y of optimal setting can require an engineer to experiment for weeks. We have devised an XML compression advisory tool that can analyze sample data files and recommend what compression tool would work the best for this data and what are the optimal settings to be used with a XML compression tool.

How to Compare the Security Quality Requirements Engineering (SQUARE) Method with Other Methods

DTIC Science & Technology

2007-08-01

Attack Trees for Modeling and Analysis 10 2.8 Misuse and Abuse Cases 10 2.9 Formal Methods 11 2.9.1 Software Cost Reduction 12 2.9.2 Common...modern or efficient techniques. • Requirements analysis typically is either not performed at all (identified requirements are directly specified without...any analysis or modeling) or analysis is restricted to functional re- quirements and ignores quality requirements, other nonfunctional requirements

THE DYNAMIC LEAP AND BALANCE TEST (DLBT): A TEST-RETEST RELIABILITY STUDY

PubMed Central

Newman, Thomas M.; Smith, Brent I.; John Miller, Sayers

2017-01-01

Background There is a need for new clinical assessment tools to test dynamic balance during typical functional movements. Common methods for assessing dynamic balance, such as the Star Excursion Balance Test, which requires controlled movement of body segments over an unchanged base of support, may not be an adequate measure for testing typical functional movements that involve controlled movement of body segments along with a change in base of support. Purpose/hypothesis The purpose of this study was to determine the reliability of the Dynamic Leap and Balance Test (DLBT) by assessing its test-retest reliability. It was hypothesized that there would be no statistically significant differences between testing days in time taken to complete the test. Study Design Reliability study Methods Thirty healthy college aged individuals participated in this study. Participants performed a series of leaps in a prescribed sequence, unique to the DLBT test. Time required by the participants to complete the 20-leap task was the dependent variable. Subjects leaped back and forth from peripheral to central targets alternating weight bearing from one leg to the other. Participants landed on the central target with the tested limb and were required to stabilize for two seconds before leaping to the next target. Stability was based upon qualitative measures similar to Balance Error Scoring System. Each assessment was comprised of three trials and performed on two days with a separation of at least six days. Results Two-way mixed ANOVA was used to analyze the differences in time to complete the sequence between the three trial averages of the two testing sessions. Intraclass Correlation Coefficient (ICC3,1) was used to establish between session test-retest reliability of the test trial averages. Significance was set a priori at p ≤ 0.05. No significant differences (p > 0.05) were detected between the two testing sessions. The ICC was 0.93 with a 95% confidence interval from 0.84 to 0.96. Conclusion This test is a cost-effective, easy to administer and clinically relevant novel measure for assessing dynamic balance that has excellent test-retest reliability. Clinical relevance As a new measure of dynamic balance, the DLBT has the potential to be a cost-effective, challenging and functional tool for clinicians. Level of Evidence 2b PMID:28900556

Personality traits, autobiographical memory and knowledge of self and others: A comparative study in young people with autism spectrum disorder.

PubMed

Robinson, Sally; Howlin, Patricia; Russell, Ailsa

2017-04-01

The relationship between dissociable components of autobiographical memory (e.g. semantic personality traits and episodic memory retrieval) and other cognitive skills that are proposed to enable one to develop a sense of self (e.g. introspection) have not previously been explored for children with autism spectrum disorder. This study compared autobiographical memory (semantic and episodic) and knowledge of self (internal/external self-knowledge and introspection/mentalising abilities) in children (aged 11-18 years) with high-functioning autism spectrum disorder and typically developing controls (total N = 48). Novel and standard tasks were employed. Compared to typically developing controls, young people with autism spectrum disorder had autobiographical memory difficulties that were characterised by a reduction in the retrieval of semantic personality traits, with more initial prompts required to facilitate episodic memory retrieval and fewer episodic memories containing emotional and sensory information. Knowledge of the self and others was also impaired, with reduced introspection and poorer mentalising abilities. Young people with autism spectrum disorder were also identified as presenting with an atypical relationship between autobiographical memory and self-knowledge, which was significantly different from typically developing controls. Test performance is discussed in relation to the functions of autobiographical memory, with consideration of how these cognitive difficulties may contribute to clinical practices and the social and behavioural characteristics of autism spectrum disorder.

Deska: Tool for Central Administration of a Grid Site

NASA Astrophysics Data System (ADS)

Kundrát, Jan; Krejčová, Martina; Hubík, Tomáš; Kerpl, Lukáš

2011-12-01

Running a typical Tier-2 site requires mastering quite a few tools for fabric management. Keeping an inventory of installed HW machines, their roles and detailed information, from IP addresses to rack locations, is typically done using various in-house applications ranging from simple spreadsheets to web applications. Such solutions, whose documentation usually leaves much to be desired, typically do not prevent a significant duplication of information, and therefore the data therein quickly become obsolete. After having deployed Cfengine as one of a few sites in the WLCG environment, the Prague Tier-2 site set forth to further automate the fabric management, developing the Deska project. The aim of the system is to provide a central place to perform changes, from adding new machines or moving them between racks to changing their assigned service roles and additional metadata. The database provides an authoritative source of information from which all other systems and services (like DHCP servers, Ethernet switches or the Cfengine system) pull their data, using newly developed configuration adaptors. An easy-to-use command line interface modelled after the Cisco IOS-based switches was developed, enabling the data center administrators to easily change any information in an intuitive way. We provide an overview of the current status of the implementation and describe our design choices aimed at further reducing the system engineers' workload.

Local Laser Strengthening of Steel Sheets for Load Adapted Component Design in Car Body Structures

NASA Astrophysics Data System (ADS)

Jahn, Axel; Heitmanek, Marco; Standfuss, Jens; Brenner, Berndt; Wunderlich, Gerd; Donat, Bernd

The current trend in car body construction concerning light weight design and car safety improvement increasingly requires an adaption of the local material properties on the component load. Martensitic hardenable steels, which are typically used in car body components, show a significant hardening effect, for instance in laser welded seams. This effect can be purposefully used as a local strengthening method. For several steel grades the local strengthening, resulting from a laser remelting process was investigated. The strength in the treated zone was determined at crash relevant strain rates. A load adapted design of complex reinforcement structures was developed for compression and bending loaded tube samples, using numerical simulation of the deformation behavior. Especially for bending loaded parts, the crash energy absorption can be increased significantly by local laser strengthening.

[Pitfalls in informed consent: a statistical analysis of malpractice law suits].

PubMed

Echigo, Junko

2014-05-01

In medical malpractice law suits, the notion of informed consent is often relevant in assessing whether negligence can be attributed to the medical practitioner who has caused injury to a patient. Furthermore, it is not rare that courts award damages for a lack of appropriate informed consent alone. In this study, two results were arrived at from a statistical analysis of medical malpractice law suits. One, unexpectedly, was that the severity of a patient's illness made no significant difference to whether damages were awarded. The other was that cases of typical medical treatment that national medical insurance does not cover were involved significantly more often than insured treatment cases. In cases where damages were awarded, the courts required more disclosure and written documents of information by medical practitioners, especially about complications and adverse effects that the patient might suffer.

Selection of Data to Address Planning Issues. Postsecondary-Education Information Planning at the State Level: Volume 3.

ERIC Educational Resources Information Center

Cloud, Sherrill

An issues-oriented framework for selecting data to support typical state-level planning analyses is presented. Attention is focused on questions concerning the planning issues, and the general data requirements required to support a given state's analytical questions and decision requirements. State-level planning issues in postsecondary education…

State and National Accreditation of One University Program: A Case Study

ERIC Educational Resources Information Center

Martindale, Maura; Bartell, Carol A.

2010-01-01

Programs preparing teachers of the deaf and hard of hearing are typically housed in schools of education and are subject to university requirements as well as state and national accreditation requirements. This article describes how one program to prepare teachers of the deaf, founded in 2007, navigated those requirements and became part of a…

Paracetamol (acetaminophen) for patent ductus arteriosus in preterm or low birth weight infants.

PubMed

Ohlsson, Arne; Shah, Prakeshkumar S

2018-04-06

In preterm newborns, the ductus arteriosus frequently fails to close and the infants require medical or surgical closure of the patent ductus arteriosus (PDA). A PDA can be treated surgically; or medically with one of two prostaglandin inhibitors, indomethacin or ibuprofen. Case reports suggest that paracetamol may be an alternative for the closure of a PDA. An association between prenatal or postnatal exposure to paracetamol and later development of autism or autism spectrum disorder has been reported. To determine the effectiveness and safety of intravenous or oral paracetamol compared with placebo or no intervention, intravenous indomethacin, intravenous or oral ibuprofen, or with other cyclo-oxygenase inhibitors for treatment of an echocardiographically diagnosed PDA in preterm or low birth weight infants. We used the standard search strategy of Cochrane Neonatal to search the Cochrane Central Register of Controlled Trials (CENTRAL 2017, Issue 10), MEDLINE via PubMed (1966 to 6 November 2017), Embase (1980 to 6 November 2017), and CINAHL (1982 to 6 November 2017). We searched clinical trial databases, conference proceedings, and the reference lists of retrieved articles for randomised controlled trials (RCT) and quasi-randomised trials. We included RCTs in which paracetamol was compared to no intervention, placebo or other agents used for closure of PDA irrespective of dose, duration and mode of administration in preterm (≤ 34 weeks' postmenstrual age) infants. We both reviewed the search results and made a final selection of potentially eligible articles by discussion. We included studies of both prophylactic and therapeutic use of paracetamol. We performed data collection and analyses in accordance with the methods of the Cochrane Neonatal Review Group. We used the GRADE approach to assess the quality of evidence for the following outcomes when data were available: failure of ductal closure after the first course of treatment; neurodevelopmental impairment; all-cause mortality during initial hospital stay (death); gastrointestinal bleed or stools positive for occult blood; and serum levels of creatinine after treatment (µmol/L). We included eight studies that reported on 916 infants. One of these studies compared paracetamol to both ibuprofen and indomethacin. Five studies compared treatment of PDA with paracetamol versus ibuprofen and enrolled 559 infants. There was no significant difference between paracetamol and ibuprofen for failure of ductal closure after the first course of drug administration (typical risk ratio (RR) 0.95, 95% confidence interval (CI) 0.75 to 1.21; typical risk difference (RD) -0.02, 95% CI -0.09 to 0.09); I² = 0% for RR and RD; moderate quality of evidence. Four studies (n = 537) reported on gastrointestinal bleed which was lower in the paracetamol group versus the ibuprofen group (typical RR 0.28, 95% CI 0.12 to 0.69; typical RD -0.06, 95% CI -0.09 to -0.02); I² = 0% for RR and RD; number needed to treat for an additional beneficial outcome (NNTB) 17 (95% CI 11 to 50); moderate quality of evidence. The serum levels of creatinine were lower in the paracetamol group compared with the ibuprofen group in four studies (moderate quality of evidence), as were serum bilirubin levels following treatment in two studies (n = 290). Platelet counts and daily urine output were higher in the paracetamol group compared with the ibuprofen group. One study reported on long-term follow-up to 18 to 24 months of age following treatment with paracetamol versus ibuprofen. There were no significant differences in the neurological outcomes at 18 to 24 months (n = 61); (low quality of evidence).Two studies compared prophylactic administration of paracetamol for a PDA with placebo or no intervention in 80 infants. Paracetamol resulted in a lower rate of failure of ductal closure after 4 to 5 days of treatment compared to placebo or no intervention which was of borderline significance for typical RR 0.49 (95% CI 0.24 to 1.00; P = 0.05); but significant for typical RD -0.21 (95% CI -0.41 to -0.02); I² = 0 % for RR and RD; NNTB 5 (95% CI 2 to 50); (low quality of evidence).Two studies (n = 277) compared paracetamol with indomethacin. There was no significant difference in the failure to close a PDA (typical RR 0.96, 95% CI 0.55 to 1.65; I² = 11%; typical RD -0.01, 95% CI -0.09 to 0.08; I² = 17%) (low quality of evidence). Serum creatinine levels were significantly lower in the paracetamol group compared with the indomethacin group and platelet counts and daily urine output were significantly higher in the paracetamol group. Moderate-quality evidence according to GRADE suggests that paracetamol is as effective as ibuprofen; low-quality evidence suggests paracetamol to be more effective than placebo or no intervention; and low-quality evidence suggests paracetamol as effective as indomethacin in closing a PDA. There was no difference in neurodevelopmental outcome in children exposed to paracetamol compared to ibuprofen; however the quality of evidence is low and comes from only one study. In view of concerns raised regarding neurodevelopmental outcomes following prenatal and postnatal exposure to paracetamol, long-term follow-up to at least 18 to 24 months' postnatal age must be incorporated in any studies of paracetamol in the newborn population. At least 19 ongoing trials have been registered. Such trials are required before any recommendations for the possible routine use of paracetamol in the newborn population can be made.

A parsimonious land data assimilation system for the SMAP/GPM satellite era

USDA-ARS?s Scientific Manuscript database

Land data assimilation systems typically require complex parameterizations in order to: define required observation operators, quantify observing/forecasting errors and calibrate a land surface assimilation model. These parameters are commonly defined in an arbitrary manner and, if poorly specified,...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swamy, S.A.; Bhowmick, D.C.; Prager, D.E.

The regulatory requirements for postulated pipe ruptures have changed significantly since the first nuclear plants were designed. The Leak-Before-Break (LBB) methodology is now accepted as a technically justifiable approach for eliminating postulation of double-ended guillotine breaks (DEGB) in high energy piping systems. The previous pipe rupture design requirements for nuclear power plant applications are responsible for all the numerous and massive pipe whip restraints and jet shields installed for each plant. This results in significant plant congestion, increased labor costs and radiation dosage for normal maintenance and inspection. Also the restraints increase the probability of interference between the piping andmore » supporting structures during plant heatup, thereby potentially impacting overall plant reliability. The LBB approach to eliminate postulating ruptures in high energy piping systems is a significant improvement to former regulatory methodologies, and therefore, the LBB approach to design is gaining worldwide acceptance. However, the methods and criteria for LBB evaluation depend upon the policy of individual country and significant effort continues towards accomplishing uniformity on a global basis. In this paper the historical development of the U.S. LBB criteria will be traced and the results of an LBB evaluation for a typical Japanese PWR primary loop applying U.S. NRC approved methods will be presented. In addition, another approach using the Japanese LBB criteria will be shown and compared with the U.S. criteria. The comparison will be highlighted in this paper with detailed discussion.« less

Infants in Drug Withdrawal: A National Description of Nurse Workload, Infant Acuity, and Parental Needs.

PubMed

Smith, Jessica G; Rogowski, Jeannette A; Schoenauer, Kathryn M; Lake, Eileen T

Infants in drug withdrawal have complex physiological and behavioral states, requiring intensive nursing care. The study objectives were to describe acuity, parental needs, and nurse workload of infants in drug withdrawal compared with other infants. The design was cross-sectional and involved secondary nurse survey data from 6045 staff nurses from a national sample of 104 neonatal intensive care units. Nurses reported the care of 15 233 infants, 361 (2.4%) of whom were in drug withdrawal. Three-fourths of hospitals had at least 1 infant in drug withdrawal. In these hospitals, the mean number of infants in drug withdrawal was 4.7. Infant acuity was significantly higher among infants in drug withdrawal. Parents of infants in drug withdrawal required significantly more care to address complex social situations (51% vs 12%). The number of infants assigned to nurses with at least 1 infant in withdrawal (mean = 2.69) was significantly higher than typical (mean = 2.51). Given infant acuity and parental needs, policies legislating patient-to-nurse ratios should permit professional discretion on the number of patients to assign nurses caring for infants in drug withdrawal. Managers and charge nurses should consider the demands of caring for infants in drug withdrawal in assignment decisions and provide support and education.

Non-dimensionalised closed-form parametric analysis of semi-active vehicle suspensions using a quarter-car model

NASA Astrophysics Data System (ADS)

Ahmadian, Mehdi; Blanchard, Emmanuel

2011-02-01

This article provides a non-dimensionalised closed-form analysis of semi-active vehicle suspensions, using a quarter-car model. The derivation of the closed-form solutions for three indices that can be used for ride comfort, vehicle handling, and stability are presented based on non-dimensionalised suspension parameters. The behaviour of semi-active vehicle suspensions is evaluated using skyhook, groundhook, and hybrid control policies, and compared with passive suspensions. The relationship between vibration isolation, suspension deflection, and road holding is studied, using three performance indices based on the mean square of the sprung mass acceleration, rattle space, and tyre deflection, respectively. The results of the study indicate that the hybrid control policy yields significantly better comfort than a passive suspension, without reducing the road-holding quality or increasing the suspension displacement for typical passenger cars. The results also indicate that for typical passenger cars, the hybrid control policy results in a better compromise between comfort, road holding and suspension travel requirements than both the skyhook and groundhook control methods.

Validation of Quantitative HPLC Method for Bacosides in KeenMind.

PubMed

Dowell, Ashley; Davidson, George; Ghosh, Dilip

2015-01-01

Brahmi (Bacopa monnieri) has been used by Ayurvedic medical practitioners in India for almost 3000 years. The pharmacological properties of Bacopa monnieri were studied extensively and the activities were attributed mainly due to the presence of characteristic saponins called "bacosides." Bacosides are complex mixture of structurally closely related compounds, glycosides of either jujubogenin or pseudojujubogenin. The popularity of herbal medicines and increasing clinical evidence to support associated health claims require standardisation of the phytochemical actives contained in these products. However, unlike allopathic medicines which typically contain a single active compound, herbal medicines are typically complex mixtures of various phytochemicals. The assay for bacosides in the British Pharmacopoeia monograph for Bacopa monnieri exemplifies that only a subset of bacosides present are included in the calculation of total bacosides. These results in calculated bacoside values are significantly lower than those attained for the same material using more inclusive techniques such as UV spectroscopy. This study illustrates some of the problems encountered when applying chemical analysis for standardisation of herbal medicines, particularly in relation to the new method development and validation of bacosides from KeenMind.

Validation of Quantitative HPLC Method for Bacosides in KeenMind

PubMed Central

Dowell, Ashley; Davidson, George; Ghosh, Dilip

2015-01-01

Brahmi (Bacopa monnieri) has been used by Ayurvedic medical practitioners in India for almost 3000 years. The pharmacological properties of Bacopa monnieri were studied extensively and the activities were attributed mainly due to the presence of characteristic saponins called “bacosides.” Bacosides are complex mixture of structurally closely related compounds, glycosides of either jujubogenin or pseudojujubogenin. The popularity of herbal medicines and increasing clinical evidence to support associated health claims require standardisation of the phytochemical actives contained in these products. However, unlike allopathic medicines which typically contain a single active compound, herbal medicines are typically complex mixtures of various phytochemicals. The assay for bacosides in the British Pharmacopoeia monograph for Bacopa monnieri exemplifies that only a subset of bacosides present are included in the calculation of total bacosides. These results in calculated bacoside values are significantly lower than those attained for the same material using more inclusive techniques such as UV spectroscopy. This study illustrates some of the problems encountered when applying chemical analysis for standardisation of herbal medicines, particularly in relation to the new method development and validation of bacosides from KeenMind. PMID:26448776

A high-resolution human contact network for infectious disease transmission

PubMed Central

Salathé, Marcel; Kazandjieva, Maria; Lee, Jung Woo; Levis, Philip; Feldman, Marcus W.; Jones, James H.

2010-01-01

The most frequent infectious diseases in humans—and those with the highest potential for rapid pandemic spread—are usually transmitted via droplets during close proximity interactions (CPIs). Despite the importance of this transmission route, very little is known about the dynamic patterns of CPIs. Using wireless sensor network technology, we obtained high-resolution data of CPIs during a typical day at an American high school, permitting the reconstruction of the social network relevant for infectious disease transmission. At 94% coverage, we collected 762,868 CPIs at a maximal distance of 3 m among 788 individuals. The data revealed a high-density network with typical small-world properties and a relatively homogeneous distribution of both interaction time and interaction partners among subjects. Computer simulations of the spread of an influenza-like disease on the weighted contact graph are in good agreement with absentee data during the most recent influenza season. Analysis of targeted immunization strategies suggested that contact network data are required to design strategies that are significantly more effective than random immunization. Immunization strategies based on contact network data were most effective at high vaccination coverage. PMID:21149721

Reducing the Environmental Impact of Clinical Laboratories.

PubMed

Lopez, Joseph B; Jackson, David; Gammie, Alistair; Badrick, Tony

2017-02-01

Healthcare is a significant contributor to environmental impact but this has received little attention. The typical laboratory uses far more energy and water per unit area than the typical office building. There is a need to sensitise laboratories to the importance of adopting good environmental practices. Since this comes at an initial cost, it is vital to obtain senior management support. Convincing management of the various tangible and intangible benefits that can accrue in the long run should help achieve this support. Many good environmental practices do not have a cost but will require a change in the culture and mind-set of the organisation. Continuing education and training are important keys to successful implementation of good practices. There is a need to undertake a rigorous cost-benefit analysis of every change that is introduced in going green. The adoption of good practices can eventually lead to ISO certification if this is desired. This paper provides suggestions that will allow a laboratory to start going green. It will allow the industry to enhance its corporate citizenship whilst improving its competitive advantage for long-term.

Lithological and Surface Geometry Joint Inversions Using Multi-Objective Global Optimization Methods

NASA Astrophysics Data System (ADS)

Lelièvre, Peter; Bijani, Rodrigo; Farquharson, Colin

2016-04-01

Geologists' interpretations about the Earth typically involve distinct rock units with contacts (interfaces) between them. In contrast, standard minimum-structure geophysical inversions are performed on meshes of space-filling cells (typically prisms or tetrahedra) and recover smoothly varying physical property distributions that are inconsistent with typical geological interpretations. There are several approaches through which mesh-based minimum-structure geophysical inversion can help recover models with some of the desired characteristics. However, a more effective strategy may be to consider two fundamentally different types of inversions: lithological and surface geometry inversions. A major advantage of these two inversion approaches is that joint inversion of multiple types of geophysical data is greatly simplified. In a lithological inversion, the subsurface is discretized into a mesh and each cell contains a particular rock type. A lithological model must be translated to a physical property model before geophysical data simulation. Each lithology may map to discrete property values or there may be some a priori probability density function associated with the mapping. Through this mapping, lithological inverse problems limit the parameter domain and consequently reduce the non-uniqueness from that presented by standard mesh-based inversions that allow physical property values on continuous ranges. Furthermore, joint inversion is greatly simplified because no additional mathematical coupling measure is required in the objective function to link multiple physical property models. In a surface geometry inversion, the model comprises wireframe surfaces representing contacts between rock units. This parameterization is then fully consistent with Earth models built by geologists, which in 3D typically comprise wireframe contact surfaces of tessellated triangles. As for the lithological case, the physical properties of the units lying between the contact surfaces are set to a priori values. The inversion is tasked with calculating the geometry of the contact surfaces instead of some piecewise distribution of properties in a mesh. Again, no coupling measure is required and joint inversion is simplified. Both of these inverse problems involve high nonlinearity and discontinuous or non-obtainable derivatives. They can also involve the existence of multiple minima. Hence, one can not apply the standard descent-based local minimization methods used to solve typical minimum-structure inversions. Instead, we are applying Pareto multi-objective global optimization (PMOGO) methods, which generate a suite of solutions that minimize multiple objectives (e.g. data misfits and regularization terms) in a Pareto-optimal sense. Providing a suite of models, as opposed to a single model that minimizes a weighted sum of objectives, allows a more complete assessment of the possibilities and avoids the often difficult choice of how to weight each objective. While there are definite advantages to PMOGO joint inversion approaches, the methods come with significantly increased computational requirements. We are researching various strategies to ameliorate these computational issues including parallelization and problem dimension reduction.

Trading Robustness Requirements in Mars Entry Trajectory Design

NASA Technical Reports Server (NTRS)

Lafleur, Jarret M.

2009-01-01

One of the most important metrics characterizing an atmospheric entry trajectory in preliminary design is the size of its predicted landing ellipse. Often, requirements for this ellipse are set early in design and significantly influence both the expected scientific return from a particular mission and the cost of development. Requirements typically specify a certain probability level (6-level) for the prescribed ellipse, and frequently this latter requirement is taken at 36. However, searches for the justification of 36 as a robustness requirement suggest it is an empirical rule of thumb borrowed from non-aerospace fields. This paper presents an investigation into the sensitivity of trajectory performance to varying robustness (6-level) requirements. The treatment of robustness as a distinct objective is discussed, and an analysis framework is presented involving the manipulation of design variables to effect trades between performance and robustness objectives. The scenario for which this method is illustrated is the ballistic entry of an MSL-class Mars entry vehicle. Here, the design variable is entry flight path angle, and objectives are parachute deploy altitude performance and error ellipse robustness. Resulting plots show the sensitivities between these objectives and trends in the entry flight path angles required to design to these objectives. Relevance to the trajectory designer is discussed, as are potential steps for further development and use of this type of analysis.

Planetary Defense: Are we currently looking for our keys under the lamp post?

NASA Astrophysics Data System (ADS)

Nuth, J. A., III; Barbee, B.; Leung, R. Y.

2016-12-01

Planetary Defense is a serious and important endeavor and the approach taken to date is a sensible beginning. Finding and cataloging all potentially hazardous asteroids and supporting research into relevant topics required to divert such a threat to our home planet is a necessary, but far from sufficient set of activities required to ensure the survival of our species. Concentrating our efforts on the asteroid threat is relatively easy. Most asteroids move in near-circular orbits, are relatively close to the ecliptic plane and are likely to be detected as hazards many decades in advance of a potential impact. The single most likely problem that will be encountered in deflecting such a threat will be developing the political will to fund the project while there is still ample time for multiple deflection techniques to be applied successfully. While asteroid threats can be mitigated, comets are the invisible danger lurking in the vast, dark parking lot that is the outer solar system. Very few comets falling into the inner solar system will be detected more than two years before their arrival: refinement of a new comet's trajectory requires months of observation before its hazard potential can be realistically assessed and knowledge of the composition, mass and shape of the body cannot be refined sufficiently to design a deflection campaign without much more observational effort. To make matters worse, because of the highly elliptical orbits of most new comets, some of which can be far out of the ecliptic plane while a few can even be in retrograde orbits, the impact velocity of a typical comet will be significantly higher than that of an asteroid. If this increase is only a factor of two, then a typical comet carries four times the impact energy of an asteroid of similar size, though much higher multipliers are possible. The distribution of meteor stream velocities can be examined to place bounds on this threat. Finally, the time required to assemble and launch an asteroid deflection mission starting from scratch and with a high probability of success could exceed three years from mission approval. Based on the recent passage of Comet Siding Spring one must therefore conclude that a successful comet deflection mission must begin well before a hazardous comet is even detected, much less characterized as a significant threat.

A community support program for children with autism and their typically developing siblings: Initial investigation.

PubMed

Kryzak, Lauren A; Cengher, Mirela; Feeley, Kathleen M; Fienup, Daniel M; Jones, Emily A

2015-06-01

Siblings are a critical part of lifelong support for individuals with autism spectrum disorder (ASD). But siblings face their own social-emotional adjustment needs. These needs may be addressed through programs that include support groups specifically for the siblings. This study examined the effects of a community program on typical siblings' depression, anxiety, ASD knowledge, and peer network as well as reciprocal interactions between the typical sibling and sibling with ASD. The program provided a sibling support group, a skills intervention for children with ASD, and an inclusive recreation time. Siblings reported significant decreases in depression and physiological anxiety and improvements in their peer network. Autism knowledge increased but only approached significance. Direct observations revealed improvement in reciprocal interactions by most children that did not reach statistical significance. Parents, typical siblings, and interventionists indicated positive reactions to the program and its goals and outcomes. Findings are discussed in terms of the need to continue to explore interventions for siblings of children with ASD. © The Author(s) 2014.

9 CFR 430.1 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... REQUIREMENTS UNDER THE FEDERAL MEAT INSPECTION ACT AND THE POULTRY PRODUCTS INSPECTION ACT REQUIREMENTS FOR.... monocytogenes, in the product throughout the shelf life of the product. Deli product. A ready-to-eat meat or... an official establishment, and typically is assembled in a sandwich for consumption. Hotdog product...

The State of Sensor Technology and Air Quality Monitoring

EPA Science Inventory

Produces data of known value and highly reliableStationary- cannot be easily relocatedInstruments are often large and require a building to support their operationExpensive to purchase and operate (typically > $20K each)Requires frequent visits by highly trained staff to check on...

Observations from Laboratory and Field-based Evaluations of Select Low Cost Sensor Performance

EPA Science Inventory

• Produces data of known value and highly reliable• Stationary- cannot be easily relocated• Instruments are often large and require a building to support their operation• Expensive to purchase and operate (typically > $20K each)• Requires frequent visi...

14 CFR 1216.305 - Actions requiring environmental assessments.

Code of Federal Regulations, 2013 CFR

2013-01-01

... prepare an EA. (b) Typical NASA actions normally requiring an EA include: (1) Specific spacecraft... altering the ongoing operations at a NASA Center which could lead directly, indirectly, or cumulatively to... solar system bodies (such as asteroids, comets, planets, dwarf planets, and planetary moons), which...

HIGH VOLUME INJECTION FOR GCMS ANALYSIS OF PARTICULATE ORGANIC SPECIES IN AMBIENT AIR

EPA Science Inventory

Detection of organic species in ambient particulate matter typically requires large air sample volumes, frequently achieved by grouping samples into monthly composites. Decreasing the volume of air sample required would allow shorter collection times and more convenient sample c...

24 CFR 3280.304 - Materials.

Code of Federal Regulations, 2012 CFR

2012-04-01

...—Structural Glued Laminated Timber—ANSI/AITC A190.1-1992. Construction and Industrial Plywood (With Typical... shall comply with these requirements. (3) Engineering analysis and testing methods contained in these references shall be utilized to judge conformance with accepted engineering practices required in § 3280.303...

24 CFR 3280.304 - Materials.

Code of Federal Regulations, 2011 CFR

2011-04-01

...—Structural Glued Laminated Timber—ANSI/AITC A190.1-1992. Construction and Industrial Plywood (With Typical... shall comply with these requirements. (3) Engineering analysis and testing methods contained in these references shall be utilized to judge conformance with accepted engineering practices required in § 3280.303...

Identifying Similarities in Cognitive Subtest Functional Requirements: An Empirical Approach

ERIC Educational Resources Information Center

Frisby, Craig L.; Parkin, Jason R.

2007-01-01

In the cognitive test interpretation literature, a Rational/Intuitive, Indirect Empirical, or Combined approach is typically used to construct conceptual taxonomies of the functional (behavioral) similarities between subtests. To address shortcomings of these approaches, the functional requirements for 49 subtests from six individually…

Quantifying the energy required for groundwater pumping across a regional aquifer system

NASA Astrophysics Data System (ADS)

Ronayne, M. J.; Shugert, D. T.

2017-12-01

Groundwater pumping can be a substantial source of energy expenditure, particularly in semiarid regions with large depths to water. In this study we assessed the energy required for groundwater pumping in the Denver Basin aquifer system, a group of sedimentary rock aquifers used for municipal water supply in Colorado. In recent decades, declining water levels in the Denver Basin aquifers has resulted in increased pumping lifts and higher energy use rates. We quantified the spatially variable energy intensity for groundwater pumping by analyzing spatial variations in the lift requirement. The median energy intensities for two major aquifers were 1.2 and 1.8 kWh m-3. Considering typical municipal well production rates and household water use in the study area, these results indicate that the energy cost associated with groundwater pumping can be a significant fraction (>20%) of the total electricity consumption for all household end uses. Pumping at this scale (hundreds of municipal wells producing from deep aquifers) also generates substantial greenhouse gas emissions. Analytical wellfield modeling conducted as part of this study clearly demonstrates how multiple components of the lift impact the energy requirement. Results provide guidance for water management strategies that reduce energy expenditure.

Synthesis of carbon core–shell pore structures and their performance as supercapacitors

DOE PAGES

Ariyanto, Teguh; Dyatkin, Boris; Zhang, Gui-Rong; ...

2015-07-15

High-power supercapacitors require excellent electrolyte mobility within the pore network and high electrical conductivity for maximum capacitance and efficiency. Achieving high power typically requires sacrificing energy densities, as the latter demands a high specific surface area and narrow porosity that impedes ion transport. Here, we present a novel solution for this optimization problem: a nanostructured core–shell carbonaceous material that exhibits a microporous carbon core surrounded by a mesoporous, graphitic shell. The tunable synthesis parameters yielded a structure that features either a sharp or a gradual transition between the core and shell sections. Electrochemical supercapacitor testing using organic electrolyte revealed thatmore » these novel core–shell materials outperform carbons with homogeneous pore structures. The hybrid core–shell materials showed a combination of good capacitance retention, typical for the carbon present in the shell and high specific capacitance, typical for the core material. These materials achieved power densities in excess of 40 kW kg -1 at energy densities reaching 27 Wh kg -1.« less

A randomized trial on the effects of 2010 Dietary Guidelines for Americans and Korean diet patterns on cardiovascular risk factors in overweight and obese adults.

PubMed

Schroeder, Natalia; Park, Young-Hee; Kang, Min-Sook; Kim, Yangsuk; Ha, Grace K; Kim, Haeng-Ran; Yates, Allison A; Caballero, Benjamin

2015-07-01

Dietary patterns that are considered healthy (eg, the Dietary Approaches to Stop Hypertension diet and Mediterranean diet) may be more successful in reducing typical cardiovascular disease risks compared to dietary patterns considered unhealthy (eg, energy-dense diets such as the typical American diet). This study assessed the effects of a Korean diet, the 2010 Dietary Guidelines for Americans (DGA), and a typical American diet on cardiometabolic risk factors, including lipid levels and blood pressure, in overweight, non-Asian individuals in the United States with elevated low-density lipoprotein cholesterol. The study was a three-period crossover, controlled-feeding study from January 2012 to May 2012. Thirty-one subjects were randomly allocated to one of six possible sequential orders for consuming the three diets for 4 weeks, each separated by a 10-day break. Data analysis included 27 subjects on the Korean diet periods and 29 in the DGA and typical American diet periods. Subjects remained weight stable. Lipid profile, blood pressure, insulin, glucose, and 24-hour urinary sodium were determined at baseline and at the end of each diet period. The additive main effects multiplicative interactions model was used to test for a subject by diet interaction. Differences among diets were determined using a mixed-models procedure (PROC MIXED) with random intercept for each subject. Total cholesterol and low-density lipoprotein cholesterol significantly decreased on Korean (P<0.0001 and P<0.01, respectively) and DGA (P<0.01 and P<0.05, respectively) diets, but not on the typical American diet. Although an unfavorable outcome, high-density lipoprotein cholesterol significantly decreased on all three diets (Korean: P<0.0001; DGA: P<0.0001; typical American: P<0.05). No diet had a significant effect on serum triglycerides, but a slight increase in triglycerides in the Korean and decrease in the DGA resulted in a significant difference between these two diets (P<0.01). All three diets caused modest decreases in systolic and diastolic blood pressure, which reached statistical significance for DGA only (P<0.05 and P<0.01, respectively). No diet had significant effect on fasting insulin, whereas fasting glucose decreased significantly on the Korean (P<0.01) and typical American (P<0.05) diets only. Urinary sodium output decreased significantly on DGA (P<0.0001). After a 4-week feeding period, Korean and DGA diet patterns resulted in positive changes in cardiovascular disease risk factors. Copyright © 2015 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Buccal drug delivery.

PubMed

Smart, John D

2005-05-01

Buccal formulations have been developed to allow prolonged localised therapy and enhanced systemic delivery. The buccal mucosa, however, while avoiding first-pass effects, is a formidable barrier to drug absorption, especially for biopharmaceutical products (proteins and oligonucleotides) arising from the recent advances in genomics and proteomics. The buccal route is typically used for extended drug delivery, so formulations that can be attached to the buccal mucosa are favoured. The bioadhesive polymers used in buccal drug delivery to retain a formulation are typically hydrophilic macro-molecules containing numerous hydrogen bonding groups. Newer second-generation bioadhesives have been developed and these include modified or new polymers that allow enhanced adhesion and/or drug delivery, in addition to site-specific ligands such as lectins. Over the last 20 years a wide range of formulations has been developed for buccal drug delivery (tablet, patch, liquids and semisolids) but comparatively few have found their way onto the market. Currently, this route is restricted to the delivery of a limited number of small lipophilic molecules that readily cross the buccal mucosa. However, this route could become a significant means for the delivery of a range of active agents in the coming years, if the barriers to buccal drug delivery are overcome. In particular, patient acceptability and the successful systemic delivery of large molecules (proteins, oligonucleotides and polysaccharides) via this route remains both a significant opportunity and challenge, and new/improved technologies may be required to address these.

High Resolution Quantitative Microbeam Analysis of Ir-coated Geological Specimens Using Conventionally Coated Standards

NASA Astrophysics Data System (ADS)

Armstrong, J. T.; Crispin, K. L.

2012-12-01

Traditionally, quantitative electron microbeam analyses of insulating specimens are performed after coating the materials with thin conducting layers of carbon. For x-ray lines greater than 1 keV in energy and beam voltages in excess of 10 keV, the results are insensitive to the exact thickness of the carbon coat. High resolution imaging, low voltage analysis, and analysis of specimens containing low levels of carbon require the use of substitute conductive coats. Typical substitutes for carbon coats (e.g., Au, Au-Pd, Cr, Al) require either using similarly coated standards or substantial corrections to be applied. Even when using modern multi-layer correction algorithms or Monte Carlo calculations, significant errors can result (e.g., Armstrong 2009, Armstrong and Crispin, 2012). We propose the use of ultra-thin layers of Ir as a substitute for C in the analysis of insulating geological specimens. Ir has been found to be an excellent coating material for high resolution imaging (e.g., Echlin, 2009). Sputtered layers as thin as 0.5 nm are found to be conductive, and layers of just a few nm provide good protection against beam damage with sub-nm grain size (Sebring et al., 1999). We have analyzed a series of geological materials with Ir coats between 1 - 8 nm and found similar levels of effects on emitted x-ray intensities as produced with typical carbon coat thicknesses (10-25 nm). E.g., for Ir thicknesses less than 5 nm, the reduction of intensity for x-ray lines between 1 and 7 keV are between 1-3% for a beam energy of 15 keV. The reduction in intensity for higher-energy lines such as Fe-K is actually less than produced by typical C-coats. We will present the results of these experiments and propose simple algorithmic equations which fit these data.

Mathematical and numerical challenges in living biological materials

NASA Astrophysics Data System (ADS)

Forest, M. Gregory; Vasquez, Paula A.

2013-10-01

The proclaimed Century of Biology is rapidly leading to the realization of how starkly different and more complex biological materials are than the materials that underpinned the industrial and technological revolution. These differences arise, in part, because biological matter exhibits both viscous and elastic behavior. Moreover, this behavior varies across the frequency, wavelength and amplitude spectrum of forcing. This broadclass of responsesin biological matter requires multiple frequency-dependent functions to specify material behavior, instead of a discrete set of parameters that relate to either viscosity or elasticity. This complexity prevails even if the biological matter is assumed to be spatially homogeneous, which is rarely true. However, very little progress has been made on the characterization of heterogeneity and how to build that information into constitutive laws and predictive models. In addition, most biological matter is non-stationary, which motivates the term "living". Biomaterials typically are in an active state in order to perform certain functions, and they often are modified or replenished on the basis of external stimuli. It has become popular in materials engineering to try to duplicate some of the functionality of biomaterials, e.g., a lot of effort has gone into the design of self-assembling, self-healing and shape shifting materials. These distinguishing features of biomaterials require significantly more degrees of freedom than traditional composites and many of the molecular species and their roles in functionality have yet to be determined. A typical biological material includes small molecule biochemical species that react and diffuse within larger species. These large molecular weightspecies provide the primary structural and biophysical properties of the material. The small molecule binding and unbinding kinetics serves to modulate material properties, and typical small molecule production and release are governed by external stimuli (e.g., stress). The bottom line is that the mathematical and numerical tools of 20th Century materials science are often insufficient for describing biological materials and for predicting their behavior both in vitro and in vivo.

Biological Hydrogen Production: Simultaneous Saccharification and Fermentation with Nitrogen and Phosphorus Removal from Wastewater Effluent

DTIC Science & Technology

2010-07-29

bedirectly catalyzed tomonosaccharidesby cellulaseswithout requiring thermochemical pretreatment , aswould typically be required with lignocellulosic ...of a similar process with lignocellulosic biomass, although such biomass would likely require ther- mochemical pretreatment prior to enzymatic...by the automatic addition of 0.1 N NaOH . Total organic carbon (TOC), ammonia nitrogen, nitrate nitrogen, nitrite nitrogen and phosphorus analyses

NPS TINYSCOPE Program Management

DTIC Science & Technology

2010-09-01

SMDC - Space and Missile Defense Command SOW - Statement of Work STEM - Science, Technology, Engineering and Mathematics STP - Space Test Program...the project. A statement of work ( SOW ) is typically used to document broad responsibilities, deliverables, and the work activities required in a...given project. The SOW acts as a guideline Summary of TINYSCOPE and Argus Requirements Requirement Threshold Objective Mission IOC Sep 2011 ASAP

Brief report: accuracy and response time for the recognition of facial emotions in a large sample of children with autism spectrum disorders.

PubMed

Fink, Elian; de Rosnay, Marc; Wierda, Marlies; Koot, Hans M; Begeer, Sander

2014-09-01

The empirical literature has presented inconsistent evidence for deficits in the recognition of basic emotion expressions in children with autism spectrum disorders (ASD), which may be due to the focus on research with relatively small sample sizes. Additionally, it is proposed that although children with ASD may correctly identify emotion expression they rely on more deliberate, more time-consuming strategies in order to accurately recognize emotion expressions when compared to typically developing children. In the current study, we examine both emotion recognition accuracy and response time in a large sample of children, and explore the moderating influence of verbal ability on these findings. The sample consisted of 86 children with ASD (M age = 10.65) and 114 typically developing children (M age = 10.32) between 7 and 13 years of age. All children completed a pre-test (emotion word-word matching), and test phase consisting of basic emotion recognition, whereby they were required to match a target emotion expression to the correct emotion word; accuracy and response time were recorded. Verbal IQ was controlled for in the analyses. We found no evidence of a systematic deficit in emotion recognition accuracy or response time for children with ASD, controlling for verbal ability. However, when controlling for children's accuracy in word-word matching, children with ASD had significantly lower emotion recognition accuracy when compared to typically developing children. The findings suggest that the social impairments observed in children with ASD are not the result of marked deficits in basic emotion recognition accuracy or longer response times. However, children with ASD may be relying on other perceptual skills (such as advanced word-word matching) to complete emotion recognition tasks at a similar level as typically developing children.

Anesthesiologist Assistant

MedlinePlus

... requirements are met), majors typically are biology, chemistry, physics, mathematics, computer science, or one of the allied health professions, such as respiratory therapy, medical technology, or ...

Thermal Design, Analysis, and Testing of the Quench Module Insert Bread Board

NASA Technical Reports Server (NTRS)

Breeding Shawn; Khodabandeh, Julia; Turner, Larry D. (Technical Monitor)

2001-01-01

The science requirements for materials processing is to provide the desired PI requirements of thermal gradient, solid/liquid interface front velocity for a given processing temperature desired by the PI. Processing is performed by translating the furnace with the sample in a stationary position to minimize any disturbances to the solid/liquid interface front during steady state processing. Typical sample materials for this metals and alloys furnace are lead-tin alloys, lead-antimony alloys, and aluminum alloys. Samples must be safe to process and therefore typically are contained with hermetically sealed cartridge tubes (gas tight) with inner ceramic liners (liquid tight) to prevent contamination and/or reaction of the sample material with the cartridge tube.

Mesoscale Models of Fluid Dynamics

NASA Astrophysics Data System (ADS)

Boghosian, Bruce M.; Hadjiconstantinou, Nicolas G.

During the last half century, enormous progress has been made in the field of computational materials modeling, to the extent that in many cases computational approaches are used in a predictive fashion. Despite this progress, modeling of general hydrodynamic behavior remains a challenging task. One of the main challenges stems from the fact that hydrodynamics manifests itself over a very wide range of length and time scales. On one end of the spectrum, one finds the fluid's "internal" scale characteristic of its molecular structure (in the absence of quantum effects, which we omit in this chapter). On the other end, the "outer" scale is set by the characteristic sizes of the problem's domain. The resulting scale separation or lack thereof as well as the existence of intermediate scales are key to determining the optimal approach. Successful treatments require a judicious choice of the level of description which is a delicate balancing act between the conflicting requirements of fidelity and manageable computational cost: a coarse description typically requires models for underlying processes occuring at smaller length and time scales; on the other hand, a fine-scale model will incur a significantly larger computational cost.

Cycle training induces muscle hypertrophy and strength gain: strategies and mechanisms.

PubMed

Ozaki, Hayao; Loenneke, J P; Thiebaud, R S; Abe, T

2015-03-01

Cycle training is widely performed as a major part of any exercise program seeking to improve aerobic capacity and cardiovascular health. However, the effect of cycle training on muscle size and strength gain still requires further insight, even though it is known that professional cyclists display larger muscle size compared to controls. Therefore, the purpose of this review is to discuss the effects of cycle training on muscle size and strength of the lower extremity and the possible mechanisms for increasing muscle size with cycle training. It is plausible that cycle training requires a longer period to significantly increase muscle size compared to typical resistance training due to a much slower hypertrophy rate. Cycle training induces muscle hypertrophy similarly between young and older age groups, while strength gain seems to favor older adults, which suggests that the probability for improving in muscle quality appears to be higher in older adults compared to young adults. For young adults, higher-intensity intermittent cycling may be required to achieve strength gains. It also appears that muscle hypertrophy induced by cycle training results from the positive changes in muscle protein net balance.

The Paperless Solution

NASA Technical Reports Server (NTRS)

2001-01-01

REI Systems, Inc. developed a software solution that uses the Internet to eliminate the paperwork typically required to document and manage complex business processes. The data management solution, called Electronic Handbooks (EHBs), is presently used for the entire SBIR program processes at NASA. The EHB-based system is ideal for programs and projects whose users are geographically distributed and are involved in complex management processes and procedures. EHBs provide flexible access control and increased communications while maintaining security for systems of all sizes. Through Internet Protocol- based access, user authentication and user-based access restrictions, role-based access control, and encryption/decryption, EHBs provide the level of security required for confidential data transfer. EHBs contain electronic forms and menus, which can be used in real time to execute the described processes. EHBs use standard word processors that generate ASCII HTML code to set up electronic forms that are viewed within a web browser. EHBs require no end-user software distribution, significantly reducing operating costs. Each interactive handbook simulates a hard-copy version containing chapters with descriptions of participants' roles in the online process.

Production of high-density highly-ionized helicon plasmas in the ProtoMPEX

NASA Astrophysics Data System (ADS)

Caneses, J. F.; Kafle, N.; Showers, M.; Goulding, R. H.; Biewer, T. M.; Caughman, J. B. O.; Bigelow, T.; Rapp, J.

2017-10-01

High-density (2-6e19 m-3) Deuterium helicon plasmas in the ProtoMPEX have been produced that successfully use differential pumping to produce neutral gas pressures suitable for testing the RF electron and ion heating concepts. To minimize collisional losses when heating electrons and ions, plasmas with very low neutral gas content (<< 0.1 Pa) in the heating sections are required. This requirement is typically not compatible with the neutral gas pressures (1-2 Pa) commonly used in high-density light-ion helicon sources. By using skimmers, a suitable gas injection scheme and long duration discharges (>0.3 s), high-density plasmas with very low neutral gas pressures (<< 0.1 Pa) in the RF heating sections have been produced. Measurements indicate the presence of a highly-ionized plasma column and that discharges lasting at least 0.3 s are required to significantly reduce the neutral gas pressure in the RF heating sections to levels suitable for investigating electron/ion RF heating concepts in this linear configuration. This work was supported by the US. D.O.E. contract DE-AC05-00OR22725.

Turboexpander plant designs can provide high ethane recovery without inlet CO/sub 2/ removal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilkinson, J.D.; Hudson, H.M.

1982-05-03

New turboexpander plant designs can process natural gas streams containing moderate amounts of carbon dioxide (CO/sub 2/) for high ethane recovery without inlet gas treating. The designs will handle a wide range of inlet ethane-plus fractions. They also offer reduced horsepower requirements compared to other processes. CO/sub 2/ is a typical component of most natural gas streams. In many cases, processing of these gas streams in a turboexpander plant for high ethane recovery requires pre-treatment of the gas for CO/sub 2/ removal. This is required to avoid the formation of solid CO/sub 2/ (freezing) in the cold sections of themore » process and/or to meet necessary residue gas and liquid product CO/sub 2/ specifications. Depending on the quantities involved, the CO/sub 2/ removal systems is generally a significant portion of both the installed cost and operating cost for the ethane recovery facility. Therefore, turboexpander plant designs that are capable of handling increased quantities of CO/sub 2/ in the feed gas without freezing can offer the gas processor substantial economic benefits.« less

Hybrid energy storage system for wireless sensor node powered by aircraft specific thermoelectric energy harvesting

NASA Astrophysics Data System (ADS)

Thangaraj, K.; Elefsiniotis, A.; Aslam, S.; Becker, Th.; Schmid, U.; Lees, J.; Featherston, C. A.; Pullin, R.

2013-05-01

This paper describes an approach for efficiently storing the energy harvested from a thermoelectric module for powering autonomous wireless sensor nodes for aeronautical health monitoring applications. A representative temperature difference was created across a thermo electric generator (TEG) by attaching a thermal mass and a cavity containing a phase change material to one side, and a heat source (to represent the aircraft fuselage) to the other. Batteries and supercapacitors are popular choices of storage device, but neither represents the ideal solution; supercapacitors have a lower energy density than batteries and batteries have lower power density than supercapacitors. When using only a battery for storage, the runtime of a typical sensor node is typically reduced by internal impedance, high resistance and other internal losses. Supercapacitors may overcome some of these problems, but generally do not provide sufficient long-term energy to allow advanced health monitoring applications to operate over extended periods. A hybrid energy storage unit can provide both energy and power density to the wireless sensor node simultaneously. Techniques such as acoustic-ultrasonic, acoustic-emission, strain, crack wire sensor and window wireless shading require storage approaches that can provide immediate energy on demand, usually in short, high intensity bursts, and that can be sustained over long periods of time. This application requirement is considered as a significant constraint when working with battery-only and supercapacitor-only solutions and they should be able to store up-to 40-50J of energy.

Power balance on a multibeam laser

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sampat, Sid; Kelly, John H.; Kosc, Tanya Z.

Inertial confinement fusion (ICF) cryogenic experiments on the 60-beam OMEGA laser have strict requirements for the laser energy delivered on target to be power balanced in order to maximize target-irradiation uniformity. For OMEGA, this quantity (power balance) is inferred from measurements of the time-integrated energy and time-resolved, spatially integrated temporal profile of each of the 60 beams at the output of the laser. The work presented here proposes a general definition of power balance as measured at the laser output and discusses the conditions that are fundamental to achieving laser power balance. Power balance necessitates equal gain across all stagesmore » of amplification, equal net losses across each amplifier stage, equal frequency conversion (from 1053 nm to 351 nm) of all 60 beams, and equal beam path lengths (beam timing). Typical OMEGA ICF laser pulse shapes consist of one or more short (100-ps) “pickets” followed by a shaped “drive” pulse of 1 to 2 ns. For these experiments, power balance is assessed for the pickets and the drive independently, with the ultimate goal of achieving root-mean-square (rms) imbalance across all 60 beams of less than 2% rms on both. Our work presents a comprehensive summary of laser shot campaigns conducted to significantly improve laser power balance from typical rms values of 4.7% and 5.2%, respectively, to the 3% level for both features along with a discussion of future work required to further reduce the rms power imbalance of the laser system.« less

The mean free path of hydrogen ionizing photons during the epoch of reionization

NASA Astrophysics Data System (ADS)

Rahmati, Alireza; Schaye, Joop

2018-05-01

We use the Aurora radiation-hydrodynamical simulations to study the mean free path (MFP) for hydrogen ionizing photons during the epoch of reionization. We directly measure the MFP by averaging the distance 1 Ry photons travel before reaching an optical depth of unity along random lines-of-sight. During reionization the free paths tend to end in neutral gas with densities near the cosmic mean, while after reionization the end points tend to be overdense but highly ionized. Despite the increasing importance of discrete, over-dense systems, the cumulative contribution of systems with NHI ≲ 1016.5 cm-2 suffices to drive the MFP at z ≈ 6, while at earlier times higher column densities are more important. After reionization the typical size of HI systems is close to the local Jeans length, but during reionization it is much larger. The mean free path for photons originating close to galaxies, {MFP_{gal}}, is much smaller than the cosmic MFP. After reionization this enhancement can remain significant up to starting distances of ˜1 comoving Mpc. During reionization, however, {MFP_{gal}} for distances ˜102 - 103 comoving kpc typically exceeds the cosmic MFP. These findings have important consequences for models that interpret the intergalactic MFP as the distance escaped ionizing photons can travel from galaxies before being absorbed and may cause them to under-estimate the required escape fraction from galaxies, and/or the required emissivity of ionizing photons after reionization.

Power balance on a multibeam laser

NASA Astrophysics Data System (ADS)

Sampat, S.; Kelly, J. H.; Kosc, T. Z.; Rigatti, A. L.; Kwiatkowski, J.; Donaldson, W. R.; Romanofsky, M. H.; Waxer, L. J.; Dean, R.; Moshier, R.

2018-02-01

Inertial confinement fusion (ICF) cryogenic experiments on the 60-beam OMEGA laser have strict requirements for the laser energy delivered on target to be power balanced in order to maximize target-irradiation uniformity. For OMEGA, this quantity (power balance) is inferred from measurements of the time-integrated energy and time-resolved, spatially integrated temporal profile of each of the 60 beams at the output of the laser. The work presented here proposes a general definition of power balance as measured at the laser output and discusses the conditions that are fundamental to achieving laser power balance. Power balance necessitates equal gain across all stages of amplification, equal net losses across each amplifier stage, equal frequency conversion (from 1053 nm to 351 nm) of all 60 beams, and equal beam path lengths (beam timing). Typical OMEGA ICF laser pulse shapes consist of one or more short (100-ps) "pickets" followed by a shaped "drive" pulse of 1 to 2 ns. For these experiments, power balance is assessed for the pickets and the drive independently, with the ultimate goal of achieving root-mean-square (rms) imbalance across all 60 beams of less than 2% rms on both. This work presents a comprehensive summary of laser shot campaigns conducted to significantly improve laser power balance from typical rms values of 4.7% and 5.2%, respectively, to the 3% level for both features along with a discussion of future work required to further reduce the rms power imbalance of the laser system.

Temporal Cyber Attack Detection.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ingram, Joey Burton; Draelos, Timothy J.; Galiardi, Meghan

Rigorous characterization of the performance and generalization ability of cyber defense systems is extremely difficult, making it hard to gauge uncertainty, and thus, confidence. This difficulty largely stems from a lack of labeled attack data that fully explores the potential adversarial space. Currently, performance of cyber defense systems is typically evaluated in a qualitative manner by manually inspecting the results of the system on live data and adjusting as needed. Additionally, machine learning has shown promise in deriving models that automatically learn indicators of compromise that are more robust than analyst-derived detectors. However, to generate these models, most algorithms requiremore » large amounts of labeled data (i.e., examples of attacks). Algorithms that do not require annotated data to derive models are similarly at a disadvantage, because labeled data is still necessary when evaluating performance. In this work, we explore the use of temporal generative models to learn cyber attack graph representations and automatically generate data for experimentation and evaluation. Training and evaluating cyber systems and machine learning models requires significant, annotated data, which is typically collected and labeled by hand for one-off experiments. Automatically generating such data helps derive/evaluate detection models and ensures reproducibility of results. Experimentally, we demonstrate the efficacy of generative sequence analysis techniques on learning the structure of attack graphs, based on a realistic example. These derived models can then be used to generate more data. Additionally, we provide a roadmap for future research efforts in this area.« less

On the Minimum Core Mass for Giant Planet Formation

NASA Astrophysics Data System (ADS)

Piso, Ana-Maria; Youdin, Andrew; Murray-Clay, Ruth

2013-07-01

The core accretion model proposes that giant planets form by the accretion of gas onto a solid protoplanetary core. Previous studies have found that there exists a "critical core mass" past which hydrostatic solutions can no longer be found and unstable atmosphere collapse occurs. This core mass is typically quoted to be around 10Me. In standard calculations of the critical core mass, planetesimal accretion deposits enough heat to alter the luminosity of the atmosphere, increasing the core mass required for the atmosphere to collapse. In this study we consider the limiting case in which planetesimal accretion is negligible and Kelvin-Helmholtz contraction dominates the luminosity evolution of the planet. We develop a two-layer atmosphere model with an inner convective region and an outer radiative zone that matches onto the protoplanetary disk, and we determine the minimum core mass for a giant planet to form within the typical disk lifetime for a variety of disk conditions. We denote this mass as critical core mass. The absolute minimum core mass required to nucleate atmosphere collapse is ˜ 8Me at 5 AU and steadily decreases to ˜ 3.5Me at 100 AU, for an ideal diatomic gas with a solar composition and a standard ISM opacity law. Lower opacity and disk temperature significantly reduce the critical core mass, while a decrease in the mean molecular weight of the nebular gas results in a larger critical core mass. Our results yield lower mass cores than corresponding studies for large planetesimal accretion rates.

Power balance on a multibeam laser

DOE PAGES

Sampat, Sid; Kelly, John H.; Kosc, Tanya Z.; ...

2018-02-15

Inertial confinement fusion (ICF) cryogenic experiments on the 60-beam OMEGA laser have strict requirements for the laser energy delivered on target to be power balanced in order to maximize target-irradiation uniformity. For OMEGA, this quantity (power balance) is inferred from measurements of the time-integrated energy and time-resolved, spatially integrated temporal profile of each of the 60 beams at the output of the laser. The work presented here proposes a general definition of power balance as measured at the laser output and discusses the conditions that are fundamental to achieving laser power balance. Power balance necessitates equal gain across all stagesmore » of amplification, equal net losses across each amplifier stage, equal frequency conversion (from 1053 nm to 351 nm) of all 60 beams, and equal beam path lengths (beam timing). Typical OMEGA ICF laser pulse shapes consist of one or more short (100-ps) “pickets” followed by a shaped “drive” pulse of 1 to 2 ns. For these experiments, power balance is assessed for the pickets and the drive independently, with the ultimate goal of achieving root-mean-square (rms) imbalance across all 60 beams of less than 2% rms on both. Our work presents a comprehensive summary of laser shot campaigns conducted to significantly improve laser power balance from typical rms values of 4.7% and 5.2%, respectively, to the 3% level for both features along with a discussion of future work required to further reduce the rms power imbalance of the laser system.« less

14 CFR § 1216.305 - Actions requiring environmental assessments.

Code of Federal Regulations, 2014 CFR

2014-01-01

... prepare an EA. (b) Typical NASA actions normally requiring an EA include: (1) Specific spacecraft... altering the ongoing operations at a NASA Center which could lead directly, indirectly, or cumulatively to... solar system bodies (such as asteroids, comets, planets, dwarf planets, and planetary moons), which...

A Comparative Typology of Student and Institutional Expectations of Online Faculty

ERIC Educational Resources Information Center

Shaw, Melanie E.; Clowes, Meena C.; Burrus, Scott W. M.

2017-01-01

Online faculty must uphold institutional expectations for their performance. Typically, online institutions have specific guidelines for faculty-to-student interactions; yet, student expectations of faculty may not necessarily align with institutional requirements. This study included a typological analysis of institutional requirements for online…

Effects of stress typicality during speeded grammatical classification.

PubMed

Arciuli, Joanne; Cupples, Linda

2003-01-01

The experiments reported here were designed to investigate the influence of stress typicality during speeded grammatical classification of disyllabic English words by native and non-native speakers. Trochaic nouns and iambic gram verbs were considered to be typically stressed, whereas iambic nouns and trochaic verbs were considered to be atypically stressed. Experiments 1a and 2a showed that while native speakers classified typically stressed words individual more quickly and more accurately than atypically stressed words during differences reading, there were no overall effects during classification of spoken stimuli. However, a subgroup of native speakers with high error rates did show a significant effect during classification of spoken stimuli. Experiments 1b and 2b showed that non-native speakers classified typically stressed words more quickly and more accurately than atypically stressed words during reading. Typically stressed words were classified more accurately than atypically stressed words when the stimuli were spoken. Importantly, there was a significant relationship between error rates, vocabulary size and the size of the stress typicality effect in each experiment. We conclude that participants use information about lexical stress to help them distinguish between disyllabic nouns and verbs during speeded grammatical classification. This is especially so for individuals with a limited vocabulary who lack other knowledge (e.g., semantic knowledge) about the differences between these grammatical categories.

Neck and Back Pain in the Elderly.

PubMed

Kalkanis, Steven N.; Borges, Lawrence

2001-05-01

Surgical intervention for neck and back pain in elderly patients without significant comorbidities can significantly improve a patient's symptoms and quality of life when more conservative therapies fail. Current spine literature strongly supports the paradigm of treating elderly patients with stable, chronic neck or back pain with conservative therapies first in order to optimize the risks and benefits of all available treatment options. If less-invasive methods fail to achieve satisfactory outcomes, more aggressive surgical options can, at that time, typically be implemented with excellent results in elderly patients without significant comorbidities. Clinical scenarios threatening to result in spine instability or nerve root or spinal cord compression require immediate intervention, especially in elderly patients, who, in general, have a higher risk of developing such conditions either through falls or trauma or acquired degenerative disease processes or malignancies. When an elderly patient enters a physician's office and asks "doctor, I've had pain for years, but it's getting worse. At my age, is it really worth having surgery?" The answer is a qualified "yes," if conservative treatments have failed and if the patient is otherwise in reasonably good health. Because the vast majority of these patients first interact with the medical system through their primary care doctors and neurologists, early recognition of situations requiring immediate attention, and those requiring referrals to spine specialists, can greatly expedite the appropriate use of scarce healthcare resources. Furthermore, knowledge of the various treatment options available to elderly patients complaining of the very common symptoms of neck or back pain can significantly improve patient care, especially in this new century when older patients will increasingly become a larger and more active force in all aspects of our society.

Research, Development and Demonstration of Micro-CHP Systems for Residential Applications - Phase I

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robert A. Zogg

The objective of the Micro-CHP Phase I effort was to develop a conceptual design for a Micro-CHP system including: Defining market potential; Assessing proposed technology; Developing a proof-of-principle design; and Developing a commercialization strategy. TIAX LLC assembled a team to develop a Micro-CHP system that will provide electricity and heating. TIAX, the contractor and major cost-share provider, provided proven expertise in project management, prime-mover design and development, appliance development and commercialization, analysis of residential energy loads, technology assessment, and market analysis. Kohler Company, the manufacturing partner, is a highly regarded manufacturer of standby power systems and other residential products. Kohlermore » provides a compellingly strong brand, along with the capabilities in product development, design, manufacture, distribution, sales, support, service, and marketing that only a manufacturer of Kohler's status can provide. GAMA, an association of appliance and equipment manufacturers, provided a critical understanding of appliance commercialization issues, including regulatory requirements, large-scale market acceptance issues, and commercialization strategies. The Propane Education & Research Council, a cost-share partner, provided cost share and aided in ensuring the fuel flexibility of the conceptual design. Micro-CHP systems being commercialized in Europe and Japan are generally designed to follow the household thermal load, and generate electricity opportunistically. In many cases, any excess electricity can be sold back to the grid (net metering). These products, however, are unlikely to meet the demands of the U.S. market. First, these products generally cannot provide emergency power when grid power is lost--a critical feature to market success in the U.S. Even those that can may have insufficient electric generation capacities to meet emergency needs for many U.S. homes. Second, the extent to which net metering will be available in the U.S. is unclear. Third, these products are typically not designed for use in households having forced hot-air heating, which is the dominant heating system in the U.S. The U.S. market will also require a major manufacturer that has the reputation and brand recognition, low-cost manufacturing capability, distribution, sales, and service infrastructure, and marketing power to achieve significant market size with a previously unknown and unproven product. History has proven time and time again that small-to-medium-size manufacturers do not have the resources and capabilities to achieve significant markets with such products. During the Phase I effort, the Team developed a conceptual design for a Micro-CHP system that addresses key DOE and U.S. market needs: (1) Provides emergency power adequate for critical household loads, with none of the key drawbacks associated with typical, low-cost emergency generators, such as liquid fuel storage, inability to power ''hard-wired'' loads, need to run temporary extension cords for plug loads, manual set up required, susceptibility to overload, and risk of failure due to lack of maintenance and infrequent operation; (2) Requires no special skills to install--plumbers, electricians and HVAC technicians will typically have all necessary skills; (3) Can be used with the major residential fuels in the U.S., including natural gas and propane, and can be easily adapted to fuel oil as well as emerging fuels as they become available; and (4) Significantly reduces household energy consumption and energy costs.« less

Simulated Single Tooth Bending of High Temperature Alloys

NASA Technical Reports Server (NTRS)

Handschuh, Robert, F.; Burke, Christopher

2012-01-01

Future unmanned space missions will require mechanisms to operate at extreme conditions in order to be successful. In some of these mechanisms, very high gear reductions will be needed to permit very small motors to drive other components at low rotational speed with high output torque. Therefore gearing components are required that can meet the mission requirements. In mechanisms such as this, bending fatigue strength capacity of the gears is very important. The bending fatigue capacity of a high temperature, nickel-based alloy, typically used for turbine disks in gas turbine engines and two tool steel materials with high vanadium content, were compared to that of a typical aerospace alloy-AISI 9310. Test specimens were fabricated by electro-discharge machining without post machining processing. Tests were run at 24 and at 490 C. As test temperature increased from 24 to 490 C the bending fatigue strength was reduced by a factor of five.

Importance of Resolving the Spectral Support of Beam-plasma Instabilities in Simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shalaby, Mohamad; Broderick, Avery E.; Chang, Philip

2017-10-20

Many astrophysical plasmas are prone to beam-plasma instabilities. For relativistic and dilute beams, the spectral support of the beam-plasma instabilities is narrow, i.e., the linearly unstable modes that grow with rates comparable to the maximum growth rate occupy a narrow range of wavenumbers. This places stringent requirements on the box-sizes when simulating the evolution of the instabilities. We identify the implied lower limits on the box size imposed by the longitudinal beam plasma instability, i.e., typically the most stringent condition required to correctly capture the linear evolution of the instabilities in multidimensional simulations. We find that sizes many orders ofmore » magnitude larger than the resonant wavelength are typically required. Using one-dimensional particle-in-cell simulations, we show that the failure to sufficiently resolve the spectral support of the longitudinal instability yields slower growth and lower levels of saturation, potentially leading to erroneous physical conclusion.« less

EVA Development and Verification Testing at NASA's Neutral Buoyancy Laboratory

NASA Technical Reports Server (NTRS)

Jairala, Juniper; Durkin, Robert

2012-01-01

As an early step in preparing for future EVAs, astronauts perform neutral buoyancy testing to develop and verify EVA hardware and operations. To date, neutral buoyancy demonstrations at NASA JSC’s Sonny Carter Training Facility have primarily evaluated assembly and maintenance tasks associated with several elements of the ISS. With the retirement of the Space Shuttle, completion of ISS assembly, and introduction of commercial participants for human transportation into space, evaluations at the NBL will take on a new focus. In this session, Juniper Jairala briefly discussed the design of the NBL and, in more detail, described the requirements and process for performing a neutral buoyancy test, including typical hardware and support equipment requirements, personnel and administrative resource requirements, examples of ISS systems and operations that are evaluated, and typical operational objectives that are evaluated. Robert Durkin discussed the new and potential types of uses for the NBL, including those by non-NASA external customers.

EVA Development and Verification Testing at NASA's Neutral Buoyancy Laboratory

NASA Technical Reports Server (NTRS)

Jairala, Juniper; Durkin, Robert

2012-01-01

As an early step in preparing for future EVAs, astronauts perform neutral buoyancy testing to develop and verify EVA hardware and operations. To date, neutral buoyancy demonstrations at NASA JSC's Sonny Carter Training Facility have primarily evaluated assembly and maintenance tasks associated with several elements of the ISS. With the retirement of the Space Shuttle, completion of ISS assembly, and introduction of commercial participants for human transportation into space, evaluations at the NBL will take on a new focus. In this session, Juniper Jairala briefly discussed the design of the NBL and, in more detail, described the requirements and process for performing a neutral buoyancy test, including typical hardware and support equipment requirements, personnel and administrative resource requirements, examples of ISS systems and operations that are evaluated, and typical operational objectives that are evaluated. Robert Durkin discussed the new and potential types of uses for the NBL, including those by non-NASA external customers.

Mini-Satellites for Affordable Space Science

NASA Astrophysics Data System (ADS)

Phipps, Andy; da Silva Curiel, Alex; Gibbon, Dave; Richardson, Guy; Cropp, Alex; Sweeting, Martin, , Sir

Magnetospheric science missions are a key component of solar terrestrial physics programmes - charged with the unravelling of these fundamental processes. These missions require distributed science gathering in a wide variety of alternative orbits. Missions typically require constellations of high delta-v formation flying spacecraft - single launch vehicles are usually mandated. Typical missions baseline space standard technology and standard communication and operations architectures - all driving up programme cost. By trading on the requirements, applying prudent analysis of performance as well as selection of subsystems outside the traditional space range most of the mission objectives can be met for a reduced overall mission cost. This paper describes Surrey's platform solution which has been studied for a future NASA opportunity. It will emphasise SSTL's proven spacecraft engineering philosophies and the use of terrestrial commercial off-the-shelf technology in this demanding environment. This will lead to a cost-capped science mission, and extend the philosophy of affordable access to space beyond Low Earth Orbit.

The biophysics of renal sympathetic denervation using radiofrequency energy.

PubMed

Patel, Hitesh C; Dhillon, Paramdeep S; Mahfoud, Felix; Lindsay, Alistair C; Hayward, Carl; Ernst, Sabine; Lyon, Alexander R; Rosen, Stuart D; di Mario, Carlo

2014-05-01

Renal sympathetic denervation is currently performed in the treatment of resistant hypertension by interventionists who otherwise do not typically use radiofrequency (RF) energy ablation in their clinical practice. Adequate RF lesion formation is dependent upon good electrode-tissue contact, power delivery, electrode-tissue interface temperature, target-tissue impedance and the size of the catheter's active electrode. There is significant interplay between these variables and hence an appreciation of the biophysical determinants of RF lesion formation is required to provide effective and safe clinical care to our patients. In this review article, we summarize the biophysics of RF ablation and explain why and how complications of renal sympathetic denervation may occur and discuss methods to minimise them.

Signing at the beginning makes ethics salient and decreases dishonest self-reports in comparison to signing at the end.

PubMed

Shu, Lisa L; Mazar, Nina; Gino, Francesca; Ariely, Dan; Bazerman, Max H

2012-09-18

Many written forms required by businesses and governments rely on honest reporting. Proof of honest intent is typically provided through signature at the end of, e.g., tax returns or insurance policy forms. Still, people sometimes cheat to advance their financial self-interests-at great costs to society. We test an easy-to-implement method to discourage dishonesty: signing at the beginning rather than at the end of a self-report, thereby reversing the order of the current practice. Using laboratory and field experiments, we find that signing before-rather than after-the opportunity to cheat makes ethics salient when they are needed most and significantly reduces dishonesty.

Cross-beam coherence of infrasonic signals at local and regional ranges.

PubMed

Alberts, W C Kirkpatrick; Tenney, Stephen M

2017-11-01

Signals collected by infrasound arrays require continuous analysis by skilled personnel or by automatic algorithms in order to extract useable information. Typical pieces of information gained by analysis of infrasonic signals collected by multiple sensor arrays are arrival time, line of bearing, amplitude, and duration. These can all be used, often with significant accuracy, to locate sources. A very important part of this chain is associating collected signals across multiple arrays. Here, a pairwise, cross-beam coherence method of signal association is described that allows rapid signal association for high signal-to-noise ratio events captured by multiple infrasound arrays at ranges exceeding 150 km. Methods, test cases, and results are described.

Shot noise limited characterization of ultraweak femtosecond pulse trains.

PubMed

Schwartz, Osip; Raz, Oren; Katz, Ori; Dudovich, Nirit; Oron, Dan

2011-01-17

Ultrafast science is inherently, due to the lack of fast enough detectors and electronics, based on nonlinear interactions. Typically, however, nonlinear measurements require significant powers and often operate in a limited spectral range. Here we overcome the difficulties of ultraweak ultrafast measurements by precision time-domain localization of spectral components. We utilize this for linear self-referenced characterization of pulse trains having ∼ 1 photon per pulse, a regime in which nonlinear techniques are impractical, at a temporal resolution of ∼ 10 fs. This technique does not only set a new scale of sensitivity in ultrashort pulse characterization, but is also applicable in any spectral range from the near-infrared to the deep UV.

Applications of multi-spectral imaging: failsafe industrial flame detector

NASA Astrophysics Data System (ADS)

Wing Au, Kwong; Larsen, Christopher; Cole, Barry; Venkatesha, Sharath

2016-05-01

Industrial and petrochemical facilities present unique challenges for fire protection and safety. Typical scenarios include detection of an unintended fire in a scene, wherein the scene also includes a flare stack in the background. Maintaining a high level of process and plant safety is a critical concern. In this paper, we present a failsafe industrial flame detector which has significant performance benefits compared to current flame detectors. The design involves use of microbolometer in the MWIR and LWIR spectrum and a dual band filter. This novel flame detector can help industrial facilities to meet their plant safety and critical infrastructure protection requirements while ensuring operational and business readiness at project start-up.

Efficient Translation of LTL Formulae into Buchi Automata

NASA Technical Reports Server (NTRS)

Giannakopoulou, Dimitra; Lerda, Flavio

2001-01-01

Model checking is a fully automated technique for checking that a system satisfies a set of required properties. With explicit-state model checkers, properties are typically defined in linear-time temporal logic (LTL), and are translated into B chi automata in order to be checked. This report presents how we have combined and improved existing techniques to obtain an efficient LTL to B chi automata translator. In particular, we optimize the core of existing tableau-based approaches to generate significantly smaller automata. Our approach has been implemented and is being released as part of the Java PathFinder software (JPF), an explicit state model checker under development at the NASA Ames Research Center.

Ensuring Support for Research and Quality Improvement (QI) Networks: Four Pillars of Sustainability—An Emerging Framework

PubMed Central

Holve, Erin

2013-01-01

Multi-institutional research and quality improvement (QI) projects using electronic clinical data (ECD) hold great promise for improving quality of care and patient outcomes but typically require significant infrastructure investments both to initiate and maintain the project over its duration. Consequently, it is important for these projects to think holistically about sustainability to ensure their long-term success. Four “pillars” of sustainability are discussed based on the experiences of EDM Forum grantees and other research and QI networks. These include trust and value, governance, management, and financial and administrative support. Two “foundational considerations,” adaptive capacity and policy levers, are also discussed. PMID:25848557

Faithful reconstruction of digital holograms captured by FINCH using a Hamming window function in the Fresnel propagation.

PubMed

Siegel, Nisan; Rosen, Joseph; Brooker, Gary

2013-10-01

Recent advances in Fresnel incoherent correlation holography (FINCH) increase the signal-to-noise ratio in hologram recording by interference of images from two diffractive lenses with focal lengths close to the image plane. Holograms requiring short reconstruction distances are created that reconstruct poorly with existing Fresnel propagation methods. Here we show a dramatic improvement in reconstructed fluorescent images when a 2D Hamming window function substituted for the disk window typically used to bound the impulse response in the Fresnel propagation. Greatly improved image contrast and quality are shown for simulated and experimentally determined FINCH holograms using a 2D Hamming window without significant loss in lateral or axial resolution.

Photodynamic therapy for periodontal disease

NASA Astrophysics Data System (ADS)

Weersink, Robert A.

2002-05-01

Periodontal disease is a family of chronic inflammatory conditions caused by bacterial infections.' It is manifested in red, swollen gingiva (gums) and can lead to destruction of the connective tissue and bone that hold teeth in place. Conventional treatments typically require some form of invasive surgery, depending on the disease stage at time of detection. Photodynamic Therapy (PDT) is the use of light-activated drugs (photosensitizers) for treatment of a variety of conditions 2 such as solid tumors, pre-malignancies, macular degeneration and actinic keratitis. There have been a number of studies of PDT as an antibacterial agent. 3'4 Depending on the photosensitizer and strain of bacteria, significant killing (several LOGS) can be achieved.

Problems With Large Joints: Shoulder Conditions.

PubMed

Campbell, Michael

2016-07-01

The shoulder is the most mobile joint in the body. It requires an extensive support system to create mobility while providing stability. Although there are many etiologies of shoulder pain, weakness, and instability, most injuries in the shoulder are due to overuse. Rotator cuff tears, labral tears, calcific tendinopathy, and impingement often result from chronic overuse injuries. Acute injuries include dislocations that can cause labral tears or other complications. Frozen shoulder refers to a typically benign condition of restricted range of motion that may spontaneously resolve but can cause prolonged pain and discomfort. The history combined with specific shoulder examination techniques can help family physicians successfully diagnose shoulder conditions. X-ray imaging typically is sufficient to rule out more serious etiologies when evaluating patients with shoulder conditions. However, imaging with magnetic resonance imaging (MRI) study or ultrasonography for rotator cuff tears, and MRI study with intra-articular contrast for labral tears, is needed to confirm these diagnoses. Corticosteroid injections and physical therapy are first-line treatments for most shoulder conditions. Surgical options typically are reserved for patients for whom conservative treatments are ineffective, and typically are performed arthroscopically. Written permission from the American Academy of Family Physicians is required for reproduction of this material in whole or in part in any form or medium.

Ocular consequences of bottle rocket injuries in children and adolescents.

PubMed

Khan, Mehnaz; Reichstein, David; M Recchia, Franco

2011-05-01

To describe the spectrum of ocular injuries and associated visual morbidity in the pediatric and adolescent population caused by bottle rockets. Retrospective review of consecutive medical records of patients 18 years or younger seen during a recent 4-year period. Outcome measures were ocular injuries at time of visit, interventions required, visual acuity at most recent follow-up, and most recent anatomic findings. Eleven eyes from 10 patients (8 boys and 2 girls aged 5-17 years) were identified. Significant ocular injuries included corneal epithelial defect (7 eyes), hyphema (6 eyes), traumatic iritis (2 eyes), iridodialysis (4 eyes), cataract (4 eyes), retinal dialysis (1 eye), and vitreous hemorrhage (2 eyes). Eight eyes required primary intervention (lensectomy in 4 eyes, corneal debridement in 2 eyes, globe exploration in 1 eye, and retinal laser photocoagulation in 1 eye). Three patients required additional procedures. These secondary interventions included pars plana vitrectomy (1 eye), muscle surgery for sensory strabismus (1 eye), corneal debridement (1 eye), and intraocular lens placement (1 eye). Most recent visual acuity (10 eyes with follow-up) was 20/30 or better in 4 eyes and 20/200 or worse in 6 eyes (for 1 eye, the patient was unavailable for follow-up). Permanent visual impairment was typically due to traumatic maculopathy. Bottle rockets can cause significant ocular injury in children, often with permanent loss of vision.

Early administration of inhaled corticosteroids for preventing chronic lung disease in very low birth weight preterm neonates.

PubMed

Shah, Vibhuti S; Ohlsson, Arne; Halliday, Henry L; Dunn, Michael

2017-01-04

Chronic lung disease (CLD) remains a common complication among preterm infants. There is increasing evidence that inflammation plays an important role in the pathogenesis of CLD. Due to their strong anti-inflammatory properties, corticosteroids are an attractive intervention strategy. However, there are growing concerns regarding short- and long-term effects of systemic corticosteroids. Theoretically, administration of inhaled corticosteroids may allow for beneficial effects on the pulmonary system with a lower risk of undesirable systemic side effects. To determine the impact of inhaled corticosteroids administered to preterm infants with birth weight up to 1500 grams (VLBW) beginning in the first two weeks after birth for the prevention of CLD as reflected by the requirement for supplemental oxygen at 36 weeks' postmenstrual age (PMA). Randomised and quasi-randomised trials were identified by searching the Cochrane Central Register of Controlled Trials (CENTRAL; 2015, Issue 12) in the Cochrane Library (searched 5 January 2016), MEDLINE (1966 to 5 January 2016), Embase (1980 to 5 January 2016), CINAHL (1982 to 5 January 2016), reference lists of published trials and abstracts published in Pediatric Research or electronically on the Pediatric Academic Societies web-site (1990 to May 2016). We included in this review randomised controlled trials of inhaled corticosteroid therapy initiated within the first two weeks of life in VLBW preterm infants. We evaluated data regarding clinical outcomes, including: CLD at 28 days or 36 weeks' PMA; mortality; combined outcome of death or CLD at 28 days of age and at 36 weeks' PMA; the need for systemic corticosteroids; failure to extubate within 14 days; and adverse effects of corticosteroids. All data were analysed using Review Manager (RevMan) 5. Meta-analyses were performed using relative risk (RR) and risk difference (RD), along with their 95% confidence intervals (CI). If RD was significant, the number needed to treat for an additional beneficial outcome (NNTB) was calculated. We used the GRADE approach to assess the quality of evidence. According to GRADE the quality of the studies was moderate. Three additional trials are included in this update. The present review includes data analyses based on 10 qualifying trials that enrolled 1644 neonates. There was no significant difference in the incidence of CLD at 36 weeks' PMA in the inhaled steroid versus the placebo group (5 trials, 429 neonates) among all randomised (typical RR 0.97, 95% CI 0.62 to 1.52; typical RD -0.00, 95% CI -0.07 to 0.06). There was no heterogeneity for this outcome (typical RR I² = 11%; typical RD I² = 0%). There was a significant reduction in the incidence of CLD at 36 weeks' PMA among survivors (6 trials, 1088 neonates) (typical RR 0.76, 95% CI 0.63 to 0.93; typical RD -0.07, 95% CI -0.13 to -0.02; NNTB 14, 95% CI 8 to 50). There was a significant reduction in the combined outcome of death or CLD at 36 weeks' PMA among all randomised neonates (6 trials, 1285 neonates) (typical RR 0.86, 95% CI 0.75 to 0.99; typical RD -0.06, 95% CI -0.11 to -0.00) (P = 0.04); NNTB 17, 95% CI 9 to infinity). There was no significant heterogeneity for any of these analyses (I² = 0%). A lower rate of reintubation was noted in the inhaled steroid group compared with the control group in one study. There were no statistically significant differences in short-term complications between groups and no differences in adverse events at long-term follow-up reported. Long-term follow-up of infants enrolled in the study by Bassler 2015 is ongoing. Based on this updated review, there is increasing evidence from the trials reviewed that early administration of inhaled steroids to VLBW neonates is effective in reducing the incidence of death or CLD at 36 weeks' PMA among either all randomised infants or among survivors. Even though there is statistical significance, the clinical relevance is of question as the upper CI limit for the outcome of death or CLD at 36 weeks' PMA is infinity. The long-term follow-up results of the Bassler 2015 study may affect the conclusions of this review. Further studies are needed to identify the risk/benefit ratio of different delivery techniques and dosing schedules for the administration of these medications. Studies need to address both the short- and long-term benefits and adverse effects of inhaled steroids with particular attention to neurodevelopmental outcome.

Heterogeneous Superconducting Low-Noise Sensing Coils

NASA Technical Reports Server (NTRS)

Hahn, Inseob; Penanen, Konstantin I.; Ho Eom, Byeong

2008-01-01

A heterogeneous material construction has been devised for sensing coils of superconducting quantum interference device (SQUID) magnetometers that are subject to a combination of requirements peculiar to some advanced applications, notably including low-field magnetic resonance imaging for medical diagnosis. The requirements in question are the following: The sensing coils must be large enough (in some cases having dimensions of as much as tens of centimeters) to afford adequate sensitivity; The sensing coils must be made electrically superconductive to eliminate Johnson noise (thermally induced noise proportional to electrical resistance); and Although the sensing coils must be cooled to below their superconducting- transition temperatures with sufficient cooling power to overcome moderate ambient radiative heat leakage, they must not be immersed in cryogenic liquid baths. For a given superconducting sensing coil, this combination of requirements can be satisfied by providing a sufficiently thermally conductive link between the coil and a cold source. However, the superconducting coil material is not suitable as such a link because electrically superconductive materials are typically poor thermal conductors. The heterogeneous material construction makes it possible to solve both the electrical- and thermal-conductivity problems. The basic idea is to construct the coil as a skeleton made of a highly thermally conductive material (typically, annealed copper), then coat the skeleton with an electrically superconductive alloy (typically, a lead-tin solder) [see figure]. In operation, the copper skeleton provides the required thermally conductive connection to the cold source, while the electrically superconductive coating material shields against Johnson noise that originates in the copper skeleton.

Effect of temperature on methane production from field-scale anaerobic digesters treating dairy manure

USDA-ARS?s Scientific Manuscript database

Temperature is a critical factor affecting anaerobic digestion because it influences both system heating requirements and methane production. Temperatures of 35-37°C are typically suggested for manure digestion, yet in temperate climate digesters, require a considerable amount of additional heat en...

Anthropometry and Standards for Wheeled Mobility: An International Comparison

ERIC Educational Resources Information Center

Steinfeld, Edward; Maisel, Jordana; Feathers, David; D'Souza, Clive

2010-01-01

Space requirements for accommodating wheeled mobility devices and their users in the built environment are key components of standards for accessible design. These requirements typically include dimensions for clear floor areas, maneuvering clearances, seat and knee clearance heights, as well as some reference dimensions on wheeled mobility device…

Avionics System Architecture for the NASA Orion Vehicle

NASA Technical Reports Server (NTRS)

Baggerman, Clint; McCabe, Mary; Verma, Dinesh

2009-01-01

It has been 30 years since the National Aeronautics and Space Administration (NASA) last developed a crewed spacecraft capable of launch, on-orbit operations, and landing. During that time, aerospace avionics technologies have greatly advanced in capability, and these technologies have enabled integrated avionics architectures for aerospace applications. The inception of NASA s Orion Crew Exploration Vehicle (CEV) spacecraft offers the opportunity to leverage the latest integrated avionics technologies into crewed space vehicle architecture. The outstanding question is to what extent to implement these advances in avionics while still meeting the unique crewed spaceflight requirements for safety, reliability and maintainability. Historically, aircraft and spacecraft have very similar avionics requirements. Both aircraft and spacecraft must have high reliability. They also must have as much computing power as possible and provide low latency between user control and effecter response while minimizing weight, volume, and power. However, there are several key differences between aircraft and spacecraft avionics. Typically, the overall spacecraft operational time is much shorter than aircraft operation time, but the typical mission time (and hence, the time between preventive maintenance) is longer for a spacecraft than an aircraft. Also, the radiation environment is typically more severe for spacecraft than aircraft. A "loss of mission" scenario (i.e. - the mission is not a success, but there are no casualties) arguably has a greater impact on a multi-million dollar spaceflight mission than a typical commercial flight. Such differences need to be weighted when determining if an aircraft-like integrated modular avionics (IMA) system is suitable for a crewed spacecraft. This paper will explore the preliminary design process of the Orion vehicle avionics system by first identifying the Orion driving requirements and the difference between Orion requirements and those of other previous crewed spacecraft avionics systems. Common systems engineering methods will be used to evaluate the value propositions, or the factors that weight most heavily in design consideration, of Orion and other aerospace systems. Then, the current Orion avionics architecture will be presented and evaluated.

Effectiveness of balance exercises in the acute post-operative phase following total hip and knee arthroplasty: A randomized clinical trial

PubMed Central

Overend, Tom J; Spaulding, Sandi J; Zecevic, Aleksandra; Kramer, John F

2015-01-01

Objectives: To determine the effectiveness of balance exercises in the acute post-operative phase following total hip arthroplasty or total knee arthroplasty. Methods: Patients who had total hip arthroplasty (n = 30) or total knee arthroplasty (n = 33) were seen in their residence 1–2 times per week for 5 weeks. At the first post-operative home visit, patients were randomly assigned to either typical (TE, n = 33) or typical plus balance (TE + B, n = 30) exercise groups. The TE group completed seven typical surgery-specific joint range-of-motion and muscle strengthening exercises, while the TE + B group completed the typical exercises plus three balance exercises. Patients were assessed before and 5 weeks after administering the rehabilitation program using four outcome measures: (1) the Berg Balance Scale, (2) the Timed Up and Go test, (3) the Western Ontario McMaster Universities Osteoarthritis Index, and (4) the Activities-specific Balance Confidence Scale. Results: Post-intervention scores for all four outcome measures were significantly improved (p < 0.01) over baseline scores. Patients who participated in the TE + B group demonstrated significantly greater improvement on the Berg Balance Scale and the Timed Up and Go tests (p < 0.01). Conclusion: Balance exercises added to a typical rehabilitation program resulted in significantly greater improvements in balance and functional mobility compared to typical exercises alone. PMID:26770765

Play preference of children with ADHD and typically developing children in Brazil: a pilot study.

PubMed

Pfeifer, Luzia Iara; Terra, Lauana Nogueira; dos Santos, Jair Lício Ferreira; Stagnitti, Karen Ellen; Panúncio-Pinto, Maria Paula

2011-12-01

Children with attention deficit hyperactivity disorder (ADHD) have been reported to have play deficits, which can cause problems in occupational development. The aim of this paper was to report research findings on children with ADHD and typically developing children in relation to preference of play partners, play places, toys and type of play. Thirty-two school aged children from low socioeconomic status were divided into two groups. One group of 16 children with ADHD were matched with 16 typically developing children. There were no significant differences between the two groups in relation to play partners, with classmates being the most frequent play partner for both groups. There were significant differences between the two groups in preferred place to play. Children with ADHD preferred to play in school and typically developing children preferred to play on the street. There were significant differences in relation to toys and type of play engaged in with children with ADHD preferring educational materials and typically developing children preferring electronic games. These findings add to knowledge of Brazilian children with ADHD and their play preferences. Comparisons are made with research with Australian children with and without ADHD. © 2011 The Authors. Australian Occupational Therapy Journal © 2011 Occupational Therapy Australia.

Spectrum of antimicrobial activity associated with ionic colloidal silver.

PubMed

Morrill, Kira; May, Kathleen; Leek, Daniel; Langland, Nicole; Jeane, La Deana; Ventura, Jose; Skubisz, Corey; Scherer, Sean; Lopez, Eric; Crocker, Ephraim; Peters, Rachel; Oertle, John; Nguyen, Krystine; Just, Scott; Orian, Michael; Humphrey, Meaghan; Payne, David; Jacobs, Bertram; Waters, Robert; Langland, Jeffrey

2013-03-01

Silver has historically and extensively been used as a broad-spectrum antimicrobial agent. However, the Food and Drug Administration currently does not recognize colloidal silver as a safe and effective antimicrobial agent. The goal of this study was to further evaluate the antimicrobial efficacy of colloidal silver. Several strains of bacteria, fungi, and viruses were grown under multicycle growth conditions in the presence or absence of ionic colloidal silver in order to assess the antimicrobial activity. For bacteria grown under aerobic or anaerobic conditions, significant growth inhibition was observed, although multiple treatments were typically required. For fungal cultures, the effects of ionic colloidal silver varied significantly between different genera. No viral growth inhibition was observed with any strains tested. The study data support ionic colloidal silver as a broad-spectrum antimicrobial agent against aerobic and anaerobic bacteria, while having a more limited and specific spectrum of activity against fungi.

A CLEAN-based method for mosaic deconvolution

NASA Astrophysics Data System (ADS)

Gueth, F.; Guilloteau, S.; Viallefond, F.

1995-03-01

Mosaicing may be used in aperture synthesis to map large fields of view. So far, only MEM techniques have been used to deconvolve mosaic images (Cornwell (1988)). A CLEAN-based method has been developed, in which the components are located in a modified expression. This allows a better utilization of the information and consequent noise reduction in the overlapping regions. Simulations show that this method gives correct clean maps and recovers most of the flux of the sources. The introduction of the short-spacing visibilities in the data set is strongly required. Their absence actually introduces artificial lack of structures on the corresponding scale in the mosaic images. The formation of ``stripes'' in clean maps may also occur, but this phenomenon can be significantly reduced by using the Steer-Dewdney-Ito algorithm (Steer, Dewdney & Ito (1984)) to identify the CLEAN components. Typical IRAM interferometer pointing errors do not have a significant effect on the reconstructed images.

Reduction of front-metallization grid shading in concentrator cells through laser micro-grooved cover glass

DOE Office of Scientific and Technical Information (OSTI.GOV)

García-Linares, Pablo, E-mail: pablo.garcia-linares@cea.fr; Voarino, Philippe; Besson, Pierre

2015-09-28

Concentrator solar cell front-grid metallizations are designed so that the trade-off between series resistance and shading factor (SF) is optimized for a particular irradiance. High concentrator photovoltaics (CPV) typically requires a metallic electrode pattern that covers up to 10% of the cell surface. The shading effect produced by this front electrode results in a significant reduction in short-circuit current (I{sub SC}) and hence, in a significant efficiency loss. In this work we present a cover glass (originally meant to protect the cell surface) that is laser-grooved with a micrometric pattern that redirects the incident solar light towards interfinger regions andmore » away from the metallic electrodes, where they would be wasted in terms of photovoltaic generation. Quantum efficiency (QE) and current (I)-voltage (V) characterization under concentration validate the proof-of-concept, showing great potential for CPV applications.« less

Water-gas-shift over metal-free nanocrystalline ceria: An experimental and theoretical study

DOE PAGES

Guild, Curtis J.; Vovchok, Dimitriy; Kriz, David A.; ...

2017-01-23

A tandem experimental and theoretical investigation of a mesoporous ceria catalyst reveals the properties of the metal oxide are conducive for activity typically ascribed to metals, suggesting reduced Ce 3+ and oxygen vacancies are responsible for the inherent bi-functionality of CO oxidation and dissociation of water required for facilitating the production of H 2. The degree of reduction of the ceria, specifically the (1 0 0) face, is found to significantly influence the binding of reagents, suggesting reduced surfaces harbor the necessary reactive sites. The metal-free catalysis of the reaction is significant for catalyst design considerations, and the suite ofmore » in situ analyses provides a comprehensive study of the dynamic nature of the high surface area catalyst system. Finally, this study postulates feasible improvements in catalytic activity may redirect the purpose of the water-gas shift reaction from CO purification to primary hydrogen production.« less

Water-gas-shift over metal-free nanocrystalline ceria: An experimental and theoretical study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guild, Curtis J.; Vovchok, Dimitriy; Kriz, David A.

A tandem experimental and theoretical investigation of a mesoporous ceria catalyst reveals the properties of the metal oxide are conducive for activity typically ascribed to metals, suggesting reduced Ce 3+ and oxygen vacancies are responsible for the inherent bi-functionality of CO oxidation and dissociation of water required for facilitating the production of H 2. The degree of reduction of the ceria, specifically the (1 0 0) face, is found to significantly influence the binding of reagents, suggesting reduced surfaces harbor the necessary reactive sites. The metal-free catalysis of the reaction is significant for catalyst design considerations, and the suite ofmore » in situ analyses provides a comprehensive study of the dynamic nature of the high surface area catalyst system. Finally, this study postulates feasible improvements in catalytic activity may redirect the purpose of the water-gas shift reaction from CO purification to primary hydrogen production.« less

Effects of Listening to Music on the Comfort of Chemotherapy Patients.

PubMed

Bilgiç, Şebnem; Acaroğlu, Rengin

2017-06-01

The symptoms of an illness that requires chemotherapy and the corresponding effects of such treatment exacerbate the pain and discomfort that patients typically experience. Listening to music may help patients cope with chemotherapy symptoms, thereby contributing to their physical ease and well-being. Seventy patients who were receiving treatment at the outpatient chemotherapy unit were invited to participate in this work. During chemotherapy sessions and the week after the sessions, the patients listened to music with headphones. The occurrence of chemotherapy symptoms such as pain, tiredness, nausea, depression, anxiety, drowsiness, lack of appetite, not feeling well, and shortness of breath in the intervention group was statistically significant after listening to music ( p < .05). Improvements in total general comfort, as well as physical, psychospiritual, and sociocultural comfort, were also statistically significant ( p < .05). These findings indicate that listening to music effectively reduces the severity of chemotherapy symptoms and enhances the comfort of patients receiving the treatment.

Using literature to help physician-learners understand and manage "difficult" patients.

PubMed

Shapiro, J; Lie, D

2000-07-01

Despite significant clinical and research efforts aimed at recognizing and managing "difficult" patients, such patients remain a frustrating experience for many clinicians. This is especially true for primary care residents, who are required to see a significant volume of patients with diverse and complex problems, but who may not have adequate training and life experience to enable them to deal with problematic doctor-patient situations. Literature--short stories, poems, and patient narratives--is a little-explored educational tool to help residents in understanding and working with difficult patients. In this report, the authors examine the mechanics of using literature to teach about difficult patients, including structuring the learning environment, establishing learning objectives, identifying teaching resources and appropriate pedagogic methods, and incorporating creative writing assignments. They also present an illustrative progression of a typical literature-based teaching session about a difficult patient.

Development of a 402.5 MHz 140 kW Inductive Output Tube

DOE Office of Scientific and Technical Information (OSTI.GOV)

R. Lawrence Ives; Michael Read, Robert Jackson

2012-05-09

This report contains the results of Phase I of an SBIR to develop a Pulsed Inductive Output Tube (IOT) with 140 kW at 400 MHz for powering H-proton beams. A number of sources, including single beam and multiple beam klystrons, can provide this power, but the IOT provides higher efficiency. Efficiencies exceeding 70% are routinely achieved. The gain is typically limited to approximately 24 dB; however, the availability of highly efficient, solid state drivers reduces the significance of this limitation, particularly at lower frequencies. This program initially focused on developing a 402 MHz IOT; however, the DOE requirement for thismore » device was terminated during the program. The SBIR effort was refocused on improving the IOT design codes to more accurately simulate the time dependent behavior of the input cavity, electron gun, output cavity, and collector. Significant improvement was achieved in modeling capability and simulation accuracy.« less

Alzheimer's disease: An acquired neurodegenerative laminopathy.

PubMed

Frost, Bess

2016-05-03

The nucleus is typically depicted as a sphere encircled by a smooth surface of nuclear envelope. For most cell types, this depiction is accurate. In other cell types and in some pathological conditions, however, the smooth nuclear exterior is interrupted by tubular invaginations of the nuclear envelope, often referred to as a "nucleoplasmic reticulum," into the deep nuclear interior. We have recently reported a significant expansion of the nucleoplasmic reticulum in postmortem human Alzheimer's disease brain tissue. We found that dysfunction of the nucleoskeleton, a lamin-rich meshwork that coats the inner nuclear membrane and associated invaginations, is causal for Alzheimer's disease-related neurodegeneration in vivo. Additionally, we demonstrated that proper function of the nucleoskeleton is required for survival of adult neurons and maintaining genomic architecture. Here, we elaborate on the significance of these findings in regard to pathological states and physiological aging, and discuss cellular causes and consequences of nuclear envelope invagination.

Short-term cognitive improvement in schizophrenics treated with typical and atypical neuroleptics.

PubMed

Rollnik, Jens D; Borsutzky, Marthias; Huber, Thomas J; Mogk, Hannu; Seifert, Jürgen; Emrich, Hinderk M; Schneider, Udo

2002-01-01

Atypical neuroleptics seem to be more beneficial than typical ones with respect to long-term neuropsychological functioning. Thus, most studies focus on the long-term effects of neuroleptics. We were interested in whether atypical neuroleptic treatment is also superior to typical drugs over relatively short periods of time. We studied 20 schizophrenic patients [10 males, mean age 35.5 years, mean Brief Psychiatric Rating Scale (BPRS) score at entry 58.9] admitted to our hospital with acute psychotic exacerbation. Nine of them were treated with typical and 11 with atypical neuroleptics. In addition, 14 healthy drug-free subjects (6 males, mean age 31.2 years) were enrolled in the study and compared to the patients. As neuropsychological tools, a divided attention test, the Vienna reaction time test, the Benton visual retention test, digit span and a Multiple Choice Word Fluency Test (MWT-B) were used during the first week after admission, within the third week and before discharge (approximately 3 months). Patients scored significantly worse than healthy controls on nearly all tests (except Vienna reaction time). Clinical ratings [BPRS and Positive and Negative Symptom Scale for Schizophrenia (PANSS)] improved markedly (p < 0.01), without a significant difference between typical and atypical medication. Clinical improvement (PANSS total score) correlated with less mistakes on the Benton test (r = 0.762, p = 0.017) and an improvement on the divided attention task (r = 0.705, p = 0.034). Neuropsychological functioning (explicit memory, p < 0.01; divided attention, p < 0.05) moderately improved for both groups under treatment but without a significant difference between atypical and typical antipsychotic drugs. Over short periods of time (3 months), neuropsychological disturbances in schizophrenia seem to be moderately responsive to both typical and atypical neuroleptics. Copyright 2002 S. Karger AG, Basel

Single-step affinity purification of enzyme biotherapeutics: a platform methodology for accelerated process development.

PubMed

Brower, Kevin P; Ryakala, Venkat K; Bird, Ryan; Godawat, Rahul; Riske, Frank J; Konstantinov, Konstantin; Warikoo, Veena; Gamble, Jean

2014-01-01

Downstream sample purification for quality attribute analysis is a significant bottleneck in process development for non-antibody biologics. Multi-step chromatography process train purifications are typically required prior to many critical analytical tests. This prerequisite leads to limited throughput, long lead times to obtain purified product, and significant resource requirements. In this work, immunoaffinity purification technology has been leveraged to achieve single-step affinity purification of two different enzyme biotherapeutics (Fabrazyme® [agalsidase beta] and Enzyme 2) with polyclonal and monoclonal antibodies, respectively, as ligands. Target molecules were rapidly isolated from cell culture harvest in sufficient purity to enable analysis of critical quality attributes (CQAs). Most importantly, this is the first study that demonstrates the application of predictive analytics techniques to predict critical quality attributes of a commercial biologic. The data obtained using the affinity columns were used to generate appropriate models to predict quality attributes that would be obtained after traditional multi-step purification trains. These models empower process development decision-making with drug substance-equivalent product quality information without generation of actual drug substance. Optimization was performed to ensure maximum target recovery and minimal target protein degradation. The methodologies developed for Fabrazyme were successfully reapplied for Enzyme 2, indicating platform opportunities. The impact of the technology is significant, including reductions in time and personnel requirements, rapid product purification, and substantially increased throughput. Applications are discussed, including upstream and downstream process development support to achieve the principles of Quality by Design (QbD) as well as integration with bioprocesses as a process analytical technology (PAT). © 2014 American Institute of Chemical Engineers.

Acute pavement burns: a unique subset of burn injuries: a five-year review of resource use and cost impact.

PubMed

Silver, Andrew G; Dunford, Gerrit M; Zamboni, William A; Baynosa, Richard C

2015-01-01

This study focuses on the hospital care of a rare subset of burn injuries caused by contact with environmentally heated pavement, to further understand the required use of resources. This article aims to show that pavement burns are typically more severe than their flame/scald counterparts. A retrospective review of patients admitted to the burn center with injuries suffered from contact with hot pavement was performed. Patients were stratified on the presence or absence of altered mental status (AMS) and additional inciting factors. A representative sample of similarly sized flame and scald wounds treated in the same time period was compiled for comparison. Those with pavement burns had a significantly greater requirement for operative intervention, repetitive debridements, overall cost/percent burned, and lengthier hospital stays than those with flame/scald burns. Pavement burn victims with AMS were significantly more likely to require an operation, a greater cost/percent burned, and longer hospital stays than those without AMS. Pavement burns are significantly worse than similarly sized scald/flame burns with regards to length of stay and total hospital costs, and the necessity of initial and repetitive operative intervention. These discrepancies are even greater in patients with AMS as a concomitant inciting factor. It is apparent that these wounds often continue to deepen during a patient's stay, likely because of continued pressure on the wounds while recumbent. As such, this article highly recommends pressure off-loading beds and more aggressive debridement in the treatment of these unique injuries.

Towards a robust framework for Probabilistic Tsunami Hazard Assessment (PTHA) for local and regional tsunami in New Zealand

NASA Astrophysics Data System (ADS)

Mueller, Christof; Power, William; Fraser, Stuart; Wang, Xiaoming

2013-04-01

Probabilistic Tsunami Hazard Assessment (PTHA) is conceptually closely related to Probabilistic Seismic Hazard Assessment (PSHA). The main difference is that PTHA needs to simulate propagation of tsunami waves through the ocean and cannot rely on attenuation relationships, which makes PTHA computationally more expensive. The wave propagation process can be assumed to be linear as long as water depth is much larger than the wave amplitude of the tsunami. Beyond this limit a non-linear scheme has to be employed with significantly higher algorithmic run times. PTHA considering far-field tsunami sources typically uses unit source simulations, and relies on the linearity of the process by later scaling and combining the wave fields of individual simulations to represent the intended earthquake magnitude and rupture area. Probabilistic assessments are typically made for locations offshore but close to the coast. Inundation is calculated only for significantly contributing events (de-aggregation). For local and regional tsunami it has been demonstrated that earthquake rupture complexity has a significant effect on the tsunami amplitude distribution offshore and also on inundation. In this case PTHA has to take variable slip distributions and non-linearity into account. A unit source approach cannot easily be applied. Rupture complexity is seen as an aleatory uncertainty and can be incorporated directly into the rate calculation. We have developed a framework that manages the large number of simulations required for local PTHA. As an initial case study the effect of rupture complexity on tsunami inundation and the statistics of the distribution of wave heights have been investigated for plate-interface earthquakes in the Hawke's Bay region in New Zealand. Assessing the probability that water levels will be in excess of a certain threshold requires the calculation of empirical cumulative distribution functions (ECDF). We compare our results with traditional estimates for tsunami inundation simulations that do not consider rupture complexity. De-aggregation based on moment magnitude alone might not be appropriate, because the hazard posed by any individual event can be underestimated locally if rupture complexity is ignored.

Influence of temperature, needle gauge and injection rate on the size distribution, concentration and acoustic responses of ultrasound contrast agents at high frequency.

PubMed

Sun, Chao; Panagakou, Ioanna; Sboros, Vassilis; Butler, Mairead B; Kenwright, David; Thomson, Adrian J W; Moran, Carmel M

2016-08-01

This paper investigated the influence of needle gauge (19G and 27G), injection rate (0.85ml·min(-1), 3ml·min(-1)) and temperature (room temperature (RT) and body temperature (BT)) on the mean diameter, concentration, acoustic attenuation, contrast to tissue ratio (CTR) and normalised subharmonic intensity (NSI) of three ultrasound contrast agents (UCAs): Definity, SonoVue and MicroMarker (untargeted). A broadband substitution technique was used to acquire the acoustic properties over the frequency range 17-31MHz with a preclinical ultrasound scanner Vevo770 (Visualsonics, Canada). Significant differences (P<0.001-P<0.05) between typical in vitro setting (19G needle, 3ml·min(-1) at RT) and typical in vivo setting (27G needle, 0.85ml·min(-1) at BT) were found for SonoVue and MicroMarker. Moreover we found that the mean volume-based diameter and concentration of both SonoVue and Definity reduced significantly when changing from typical in vitro to in vivo experimental set-ups, while those for MicroMarker did not significantly change. From our limited measurements of Definity, we found no significant change in attenuation, CTR and NSI with needle gauge. For SonoVue, all the measured acoustic properties (attenuation, CTR and NSI) reduced significantly when changing from typical in vitro to in vivo experimental conditions, while for MicroMarker, only the NSI reduced, with attenuation and CTR increasing significantly. These differences suggest that changes in physical compression and temperature are likely to alter the shell structure of the UCAs resulting in measureable and significant changes in the physical and high frequency acoustical properties of the contrast agents under typical in vitro and preclinical in vivo experimental conditions. Copyright © 2016 Elsevier B.V. All rights reserved.

Contour interpolated radial basis functions with spline boundary correction for fast 3D reconstruction of the human articular cartilage from MR images

DOE Office of Scientific and Technical Information (OSTI.GOV)

Javaid, Zarrar; Unsworth, Charles P., E-mail: c.unsworth@auckland.ac.nz; Boocock, Mark G.

2016-03-15

Purpose: The aim of this work is to demonstrate a new image processing technique that can provide a “near real-time” 3D reconstruction of the articular cartilage of the human knee from MR images which is user friendly. This would serve as a point-of-care 3D visualization tool which would benefit a consultant radiologist in the visualization of the human articular cartilage. Methods: The authors introduce a novel fusion of an adaptation of the contour method known as “contour interpolation (CI)” with radial basis functions (RBFs) which they describe as “CI-RBFs.” The authors also present a spline boundary correction which further enhancesmore » volume estimation of the method. A subject cohort consisting of 17 right nonpathological knees (ten female and seven male) is assessed to validate the quality of the proposed method. The authors demonstrate how the CI-RBF method dramatically reduces the number of data points required for fitting an implicit surface to the entire cartilage, thus, significantly improving the speed of reconstruction over the comparable RBF reconstruction method of Carr. The authors compare the CI-RBF method volume estimation to a typical commercial package (3D DOCTOR), Carr’s RBF method, and a benchmark manual method for the reconstruction of the femoral, tibial, and patellar cartilages. Results: The authors demonstrate how the CI-RBF method significantly reduces the number of data points (p-value < 0.0001) required for fitting an implicit surface to the cartilage, by 48%, 31%, and 44% for the patellar, tibial, and femoral cartilages, respectively. Thus, significantly improving the speed of reconstruction (p-value < 0.0001) by 39%, 40%, and 44% for the patellar, tibial, and femoral cartilages over the comparable RBF model of Carr providing a near real-time reconstruction of 6.49, 8.88, and 9.43 min for the patellar, tibial, and femoral cartilages, respectively. In addition, it is demonstrated how the CI-RBF method matches the volume estimation of a typical commercial package (3D DOCTOR), Carr’s RBF method, and a benchmark manual method for the reconstruction of the femoral, tibial, and patellar cartilages. Furthermore, the performance of the segmentation method used for the extraction of the femoral, tibial, and patellar cartilages is assessed with a Dice similarity coefficient, sensitivity, and specificity measure providing high agreement to manual segmentation. Conclusions: The CI-RBF method provides a fast, accurate, and robust 3D model reconstruction that matches Carr’s RBF method, 3D DOCTOR, and a manual benchmark method in accuracy and significantly improves upon Carr’s RBF method in data requirement and computational speed. In addition, the visualization tool has been designed to quickly segment MR images requiring only four mouse clicks per MR image slice.« less

Oral care experiences and challenges in children with autism spectrum disorders.

PubMed

Stein, Leah I; Polido, José C; Najera, Sandy Oliver Lopez; Cermak, Sharon A

2012-01-01

The purpose of this study was to investigate the differences between children with autism spectrum disorders (ASD) and their typically developing peers in relation to aspects of oral care. Participants included 396 parents of ASD children or typically developing 2- to 18-year-olds. Parents completed a 37-item questionnaire designed by authors to elicit information about oral care in the home and dental office. Descriptive, bivariate, and multivariate regression analyses were conducted to examine the association between diagnostic group and oral care variables. Significantly more parents of ASD children than parents of typically developing children reported difficulty across almost all oral care variables explored, including oral care in the home, oral care at the dentist, and access to oral care. Following multivariate regression to control for possible confounders-including age, gender, Hispanic status, and paternal education level-all previously significant variables remained significant. This study indicates that children with autism spectrum disorders experience greater difficulties and barriers to care in both the home and dental office settings than their typically developing peers.

Hard X-ray spectral properties of distant AGN in the NuSTAR surveys

NASA Astrophysics Data System (ADS)

Del Moro, Agnese

2016-08-01

I will present a study on the average broad X-ray band (~0.5-30 keV) spectral properties of the NuSTAR sources detected in the ECDF-S, EGS and COSMOS fields. Constructing the rest-frame composite spectra of AGN in different hydrogen column density (NH) and 10-40 keV luminosity bins, using Chandra and NuSTAR data, we investigate the typical spectral parameters of the AGN population, such as the photon index, NH, strength of the iron emission line (~6.4 keV) and of the Compton reflection at ~20-30 keV. Placing constraints on the reflection fraction (R) is of particular importance for the synthesis models of the cosmic X-ray background (CXB), as this parameter is strongly linked with the fraction of Compton-thick AGN needed to fit the CXB spectrum. Thanks to its sensitivity at ~20-30 keV, NuSTAR allows for the first time, to directly place such constraints for non-local AGN. We find typical reflection fractions of R~1-1.5, consistent the AGN in the local Universe, with a tentative evidence for the most obscured AGN to have, on average, stronger Compton reflection compared to unobscured AGN. Moreover, contrary to previous works, we do not find significant evidence for a decrease of the reflection strength with luminosity for typical Γ=1.8-1.9. Our results support CXB models that require a relatively small fraction of CT AGN, of the order of ~10-15%.

Risk determinants of small and medium-sized manufacturing enterprises (SMEs) - an exploratory study in New Zealand

NASA Astrophysics Data System (ADS)

Islam, Ariful; Tedford, Des

2012-08-01

The smooth running of small and medium-sized manufacturing enterprises (SMEs) presents a significant challenge irrespective of the technological and human resources they may have at their disposal. SMEs continuously encounter daily internal and external undesirable events and unwanted setbacks to their operations that detract from their business performance. These are referred to as `disturbances' in our research study. Among the disturbances, some are likely to create risks to the enterprises in terms of loss of production, manufacturing capability, human resource, market share, and, of course, economic losses. These are finally referred to as `risk determinant' on the basis of their correlation with some risk indicators, which are linked to operational, occupational, and economic risks. To deal with these risk determinants effectively, SMEs need a systematic method of approach to identify and treat their potential effects along with an appropriate set of tools. However, initially, a strategic approach is required to identify typical risk determinants and their linkage with potential business risks. In this connection, we conducted this study to explore the answer to the research question: what are the typical risk determinants encountered by SMEs? We carried out an empirical investigation with a multi-method research approach (a combination of a questionnaire-based mail survey involving 212 SMEs and five in-depth case studies) in New Zealand. This paper presents a set of typical internal and external risk determinants, which need special attention to be dealt with to minimize operational risks of an SME.

Lesson 6: Registration

EPA Pesticide Factsheets

Lesson 6 provides CROMERR checklist items grouped under the Registration Process, where users establish their accounts in the system. This process typically requires users to provide information about them.

Chrominance watermark for mobile applications

NASA Astrophysics Data System (ADS)

Reed, Alastair; Rogers, Eliot; James, Dan

2010-01-01

Creating an imperceptible watermark which can be read by a broad range of cell phone cameras is a difficult problem. The problems are caused by the inherently low resolution and noise levels of typical cell phone cameras. The quality limitations of these devices compared to a typical digital camera are caused by the small size of the cell phone and cost trade-offs made by the manufacturer. In order to achieve this, a low resolution watermark is required which can be resolved by a typical cell phone camera. The visibility of a traditional luminance watermark was too great at this lower resolution, so a chrominance watermark was developed. The chrominance watermark takes advantage of the relatively low sensitivity of the human visual system to chrominance changes. This enables a chrominance watermark to be inserted into an image which is imperceptible to the human eye but can be read using a typical cell phone camera. Sample images will be presented showing images with a very low visibility which can be easily read by a typical cell phone camera.

The fall of the black hole firewall: natural nonmaximal entanglement for the Page curve

NASA Astrophysics Data System (ADS)

Hotta, Masahiro; Sugita, Ayumu

2015-12-01

The black hole firewall conjecture is based on the Page curve hypothesis, which claims that entanglement between a black hole and its Hawking radiation is almost maximum. Adopting canonical typicality for nondegenerate systems with nonvanishing Hamiltonians, we show the entanglement becomes nonmaximal, and energetic singularities (firewalls) do not emerge for general systems. An evaporating old black hole must evolve in Gibbs states with exponentially small error probability after the Page time as long as the states are typical. This means that the ordinarily used microcanonical states are far from typical. The heat capacity computed from the Gibbs states should be nonnegative in general. However, the black hole heat capacity is actually negative due to the gravitational instability. Consequently the states are not typical until the last burst. This requires inevitable modification of the Page curve, which is based on the typicality argument. For static thermal pure states of a large AdS black hole and its Hawking radiation, the entanglement entropy equals the thermal entropy of the smaller system.

Index change of chalcogenide materials from precision glass molding processes

NASA Astrophysics Data System (ADS)

Deegan, J.; Walsh, K.; Lindberg, G.; Benson, R.; Gibson, D.; Bayya, S.; Sanghera, J.; Stover, E.

2015-05-01

With the increase in demand for infrared optics for thermal applications and the use of glass molding of chalcogenide materials to support these higher volume optical designs, an investigation of changes to the optical properties of these materials is required. Typical precision glass molding requires specific thermal conditions for proper lens molding of any type of optical glass. With these conditions a change (reduction) of optical index occurs after molding of all oxide glass types and it is presumed that a similar behavior will happen with chalcogenide based materials. We will discuss the effects of a typical molding thermal cycle for use with commercially and newly developed chalcogenide materials and show results of index variation from nominally established material data.

The benefit of tissue contact monitoring with an electrical coupling index during ablation of typical atrial flutter--a prospective randomised control trial.

PubMed

Jones, Michael A; Webster, David; Wong, Kelvin C K; Hayes, Christopher; Qureshi, Norman; Rajappan, Kim; Bashir, Yaver; Betts, Timothy R

2014-12-01

We sought to investigate the use of tissue contact monitoring by means of the electrical coupling index (ECI) in a prospective randomised control trial of patients undergoing cavotricuspid isthmus (CTI) ablation for atrial flutter. Patients with ECG-documented typical flutter undergoing their first CTI ablation were randomised to ECI™-guided or non-ECI™-guided ablation. An irrigated-tip ablation catheter was used in all cases. Consecutive 50-W, 60-s radiofrequency lesions were applied to the CTI, from the tricuspid valve to inferior vena cava, with no catheter movement permitted during radiofrequency (RF) delivery. The ablation endpoint was durable CTI block at 20 min post-ablation. Patients underwent routine clinic follow-up post-operatively. A total of 101 patients (79 male), mean age 66 (+/-11), 50 ECI-guided and 51 control cases were enrolled in the study. CTI block was achieved in all. There were no acute complications. All patients were alive at follow-up. CTI block was achieved in a single pass in 36 ECI-guided and 30 control cases (p = 0.16), and at 20 min post-ablation, re-conduction was seen in 5 and 12 cases, respectively (p = 0.07). There was no significant difference in total procedure time (62.7 ± 33 vs. 62.3 ± 33 min, p = 0.92), RF requirement (580 ± 312 vs. 574 ± 287 s, p = 0.11) or fluoroscopy time (718 ± 577 vs. 721 ± 583 s, p = 0.78). After 6 ± 4 months, recurrence of flutter had occurred in 1 (2 %) ECI vs. 8 (16 %) control cases (OR 0.13, 95 % CI 0.01-1.08, p = 0.06). ECI-guided CTI ablation demonstrated a non-statistically significant reduction in late recurrence of atrial flutter, at no cost to procedural time, radiation exposure or RF requirement.

Effect of current emission abatement strategies on air quality improvement in China: A case study of Baotou, a typical industrial city in Inner Mongolia.

PubMed

Qiu, Xionghui; Duan, Lei; Cai, Siyi; Yu, Qian; Wang, Shuxiao; Chai, Fahe; Gao, Jian; Li, Yanping; Xu, Zhaoming

2017-07-01

The national Air Pollution Prevention and Control Action Plan required significant decreases in PM 2.5 levels over China. To explore more effective emission abatement strategies in industrial cities, a case study was conducted in Baotou to evaluate the current national control measures. The total emissions of SO 2, NO X , PM 2.5 and NMVOC (non-methane volatile organic compounds) in Baotou were 211.2Gg, 156.1Gg, 28.8Gg, and 48.5Gg, respectively in 2013, and they would experience a reduction of 30.4%, 26.6%, 15.1%, and 8.7%, respectively in 2017 and 39.0%, 32.0%, 24.4%, and 12.9%, respectively in 2020. The SO 2 , NO X and PM 2.5 emissions from the industrial sector would experience a greater decrease, with reductions of 37%, 32.7 and 24.3%, respectively. From 2013 to 2020, the concentrations of SO 2 , NO 2 , and PM 2.5 are expected to decline by approximately 30%, 10% and 14.5%, respectively. The reduction rate of SNA (sulfate, nitrate and ammonium) concentrations was significantly higher than that of PM 2.5 in 2017, implying that the current key strategy toward controlling air pollutants from the industrial sector is more powerful for SNA. Although air pollution control measures implemented in the industrial sector could greatly reduce total emissions, constraining the emissions from lower sources such as residential coal combustion would be more effective in decreasing the concentration of PM 2.5 from 2017 to 2020. These results suggest that even for a typical industrial city, the reduction of PM 2.5 concentrations not only requires decreases in emissions from the industrial sector, but also from the low emission sources. The seasonal variation in sulfate concentration also showed that emission from coal-burning is the key factor to control during the heating season. Copyright © 2016. Published by Elsevier B.V.

Developing a Standard Based Advanced Lab Course that Fulfills COM3 Requirements

NASA Astrophysics Data System (ADS)

Michalak, Rudi

2015-03-01

An advanced physics lab has been developed into a course that fulfills the requirements for a university studies program `COM3' course using Standard Teaching (ST) methods. The COM3 course is a capstone course under the new USP2015 study requirements for all majors. It replaces the WC writing requirement, typically filled in the English Dept., and adds the teaching of oral and digital communication skills. ST is a method that replaces typical assessments (homework / exam grades) with new assessments that measure certain specified learning outcomes. In combination with oral assessments and an oral final exam, the ST proves an efficient tool to implement the USP Learning Outcomes into a physics course. COM3 requires an unprecedented seven learning outcomes in a single course. Variety of learning outcomes: interdisciplinary goals, levels of writing (with drafting steps), organizational structure, standard language metrics, research and presentation deliverance skills, appropriate addressing of a variety of audiences, etc. With other assessment approaches than ST this variety would be difficult to meet in a physics course. An extended ST rubric has been developed for this course and will be presented and discussed in some detail.

Children with Traumatic Brain Injury: Associations Between Parenting and Social Adjustment

PubMed Central

Root, Amy E.; Wimsatt, Maureen; Rubin, Kenneth H.; Bigler, Erin. D.; Dennis, Maureen; Gerhardt, Cynthia A.; Stancin, Terry; Taylor, H. Gerry; Vannatta, Kathryn; Yeates, Keith O.

2015-01-01

Similarities and differences in parenting practices of children (Mage = 10; range 8-13 years) with traumatic brain injury (TBI) and socially-typical controls were examined. In addition, parenting practices were examined as moderators between injury group status (TBI or socially-typical) and social adjustment in the peer group. Mothers completed assessments of parenting practices; children's peers reported about children's social adjustment. The mothers of children with TBI reported significantly lower levels of nurturance and significantly higher levels of restrictiveness than mothers of socially-typical children. In addition, mothers’ nurturance moderated the relation between injury group and peer rejection, such that children with TBI were more rejected by classmates compared to their socially-typical peers at low levels of maternal nurturance. The findings are interpreted as supporting the important role parents play in the development of children with a history of TBI, as well as the implications for family-level interventions. PMID:26726276

Does Curriculum Practical Training Affect Engineers' Workplace Outcomes? Evidence from an Engineer Survey in China

ERIC Educational Resources Information Center

Li, Jing; Zhang, Yu; Tsang, Mun; Li, Manli

2015-01-01

With the increasing attention to STEM (Science, Technology, Engineering, and Math), hands-on Curriculum Practical Training (CPT) has been expanding rapidly worldwide as a requirement of the undergraduate engineering education. In China, a typical CPT for undergraduate engineering students requires several weeks of hands-on training in the…

77 FR 57029 - Approval and Promulgation of State Implementation Plan Revisions; Infrastructure Requirements for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-17

... either electronically through www.regulations.gov or in hard copy at the Air Program, Environmental... 4 p.m., excluding Federal holidays. FOR FURTHER INFORMATION CONTACT: Kathy Ayala, Air Program, U.S... 1997 ozone NAAQS, states typically have met the basic program elements required in section 110(a)(2...

Exploring Unidimensional Proficiency Classification Accuracy from Multidimensional Data in a Vertical Scaling Context

ERIC Educational Resources Information Center

Kroopnick, Marc Howard

2010-01-01

When Item Response Theory (IRT) is operationally applied for large scale assessments, unidimensionality is typically assumed. This assumption requires that the test measures a single latent trait. Furthermore, when tests are vertically scaled using IRT, the assumption of unidimensionality would require that the battery of tests across grades…

Using Technology-Based Simulations to Promote Teacher Candidate Parental Collaboration and Reflective Instructional Decision Making

ERIC Educational Resources Information Center

Accardo, Amy; Xin, Joy

2017-01-01

In teacher preparation programs, teacher candidates are expected to learn parental collaboration through their required college coursework and field experiences. Due to confidentiality requirements in field placements, however, teacher candidates are typically not provided an opportunity to attend IEP or 504 plan conferences. In this study,…

The Effectiveness of Blended Instruction in Core Postsecondary Mathematics Courses

ERIC Educational Resources Information Center

Bargagliotti, Anna; Botelho, Fernanda; Gleason, Jim; Haddock, John; Windsor, Alistair

2012-01-01

Most students in U.S. universities are required to take a collection of core courses regardless of their degree or major. These courses are known as "general education" courses. The general education requirements typically include at least one mathematics course. Unfortunately each year hundreds of thousands of students in the US do not…

77 FR 74481 - Agency Information Collection Activities: Final Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-14

... comments request. Form Title: EIB 99-17 Enhanced Assignment of Policy Proceeds. SUMMARY: The Export-Import... the policy proceeds. The form is typically part of the documentation required by financial institution... require Ex-Im Bank insurance policies to support lender financing. The form can be viewed at www.exim.gov...

Determining nitrate and ammonium requirements for optimal in vitro response of diverse pear species

USDA-ARS?s Scientific Manuscript database

Inorganic nitrate (NO3-) and ammonium (NH4+) are the two major components in nitrogen (N) nutrition of typical tissue culture growth media, and the total amounts and ratios influence both shoot induction and differentiation. This study was designed to determine the optimal N requirements and NH4+ to...

Exploring the Core: An Examination of Required Courses in ALA-Accredited

ERIC Educational Resources Information Center

Hall, Russell A.

2009-01-01

This paper examines the required courses of ALA-accredited Library and Information Science programs as published on their websites. The study expands on previous research in this area. Findings show that the typical core curriculum has grown to include both research and information technology in addition to the more traditional subjects. The…

A Viking satellite orbit trim strategy

NASA Technical Reports Server (NTRS)

Hintz, G. R.

1971-01-01

One strategy is submitted for meeting the varied and stringent requirements of the Viking Project on the control of the satellite orbit to obtain reconnaissance and to prepare for lander release. To satisfy these requirements, different orbit trim maneuver strategies were developed for two typical Viking missions. In addition, a summary of recent numerical results is included to show that this strategy satisfies the mission requirements which have been identified.

Progress in Developing Transfer Functions for Surface Scanning Eddy Current Inspections

NASA Astrophysics Data System (ADS)

Shearer, J.; Heebl, J.; Brausch, J.; Lindgren, E.

2009-03-01

As US Air Force (USAF) aircraft continue to age, additional inspections are required for structural components. The validation of new inspections typically requires a capability demonstration of the method using representative structure with representative damage. To minimize the time and cost required to prepare such samples, Electric Discharge machined (EDM) notches are commonly used to represent fatigue cracks in validation studies. However, the sensitivity to damage typically changes as a function of damage type. This requires a mathematical relationship to be developed between the responses from the two different flaw types to enable the use of EDM notched samples to validate new inspections. This paper reviews progress to develop transfer functions for surface scanning eddy current inspections of aluminum and titanium alloys found in structural aircraft components. Multiple samples with well characterized grown fatigue cracks and master gages with EDM notches, both with a range of flaw sizes, were used to collect flaw signals with USAF field inspection equipment. Analysis of this empirical data was used to develop a transfer function between the response from the EDM notches and grown fatigue cracks.

The use of definite and indefinite articles by children with specific language impairment.

PubMed

Polite, Elgustus J; Leonard, Laurence B; Roberts, Felicia D

2011-08-01

Among the grammatical limitations seen in English-speaking children with specific language impairment (SLI) is a prolonged period of using articles (e.g., a, the) inconsistently. Most studies documenting this difficulty have focused on article omission and have not made the distinction between definite and indefinite article contexts. In this study, there were 36 participants: 12 5-year-olds with SLI, 12 typically-developing children matched for age, and 12 younger, typically-developing children matched with participants in the SLI group according to mean length of utterance. All 36 children participated in a task requiring indefinite article use, and a task requiring use of the definite article, in which the referent of the noun had already been established in the discourse. The children with SLI showed less use of definite articles in particular, relative to both groups of typically-developing children. Substitutions as well as omissions were seen. The findings suggest that the article limitations of the children with SLI were attributable in part to an incomplete understanding of how definite articles are to be used.

Pressure-Sensitive Paints Advance Rotorcraft Design Testing

NASA Technical Reports Server (NTRS)

2013-01-01

The rotors of certain helicopters can spin at speeds as high as 500 revolutions per minute. As the blades slice through the air, they flex, moving into the wind and back out, experiencing pressure changes on the order of thousands of times a second and even higher. All of this makes acquiring a true understanding of rotorcraft aerodynamics a difficult task. A traditional means of acquiring aerodynamic data is to conduct wind tunnel tests using a vehicle model outfitted with pressure taps and other sensors. These sensors add significant costs to wind tunnel testing while only providing measurements at discrete locations on the model's surface. In addition, standard sensor solutions do not work for pulling data from a rotor in motion. "Typical static pressure instrumentation can't handle that," explains Neal Watkins, electronics engineer in Langley Research Center s Advanced Sensing and Optical Measurement Branch. "There are dynamic pressure taps, but your costs go up by a factor of five to ten if you use those. In addition, recovery of the pressure tap readings is accomplished through slip rings, which allow only a limited amount of sensors and can require significant maintenance throughout a typical rotor test." One alternative to sensor-based wind tunnel testing is pressure sensitive paint (PSP). A coating of a specialized paint containing luminescent material is applied to the model. When exposed to an LED or laser light source, the material glows. The glowing material tends to be reactive to oxygen, explains Watkins, which causes the glow to diminish. The more oxygen that is present (or the more air present, since oxygen exists in a fixed proportion in air), the less the painted surface glows. Imaged with a camera, the areas experiencing greater air pressure show up darker than areas of less pressure. "The paint allows for a global pressure map as opposed to specific points," says Watkins. With PSP, each pixel recorded by the camera becomes an optical pressure tap. "Instead of having 100 or 200 pressure taps, you can have in theory several million, up to whatever the resolution of your camera is." Watkins explains that typical wind tunnel testing requires two models: one with very little instrumentation, and a pressure model with a significant amount of sensors applied. "If you can make all of your measurements on one model with PSP, you've decreased your model costs by at least a factor of two and preferably your testing costs by about that much," he says. PSP technology has been around for almost 20 years, but a PSP solution for gathering instantaneous dynamic pressure data from surfaces moving at high speeds, such as rotor blades, was not available until a NASA partnership led to a game-changing innovation.

An approach to optimised control of HVAC systems in indoor swimming pools

NASA Astrophysics Data System (ADS)

Ribeiro, Eliseu M. A.; Jorge, Humberto M. M.; Quintela, Divo A. A.

2016-04-01

Indoor swimming pools are recognised as having a high level of energy consumption and present a great potential for energy saving. The energy is spent in several ways such as evaporation heat loss from the pool, high rates of ventilation required to guarantee the indoor air quality, and ambient temperatures with expressive values (typically 28-30°C) required to maintain conditions of comfort. This paper presents an approach to optimising control of heat ventilation and air conditioning systems that could be implemented in a building energy management system. It is easily adapted to any kind of pool and results in significant energy consumption reduction. The development and validation of the control model were carried out with a building thermal simulation software. The use of this control model in the case study building could reduce the energy efficiency index by 7.14 points (7.4% of total) which adds up to an energy cost saving of 15,609€ (7.5% of total).

Integrated hollow microneedle-optofluidic biosensor for therapeutic drug monitoring in sub-nanoliter volumes

NASA Astrophysics Data System (ADS)

Ranamukhaarachchi, Sahan A.; Padeste, Celestino; Dübner, Matthias; Häfeli, Urs O.; Stoeber, Boris; Cadarso, Victor J.

2016-07-01

Therapeutic drug monitoring (TDM) typically requires painful blood drawn from patients. We propose a painless and minimally-invasive alternative for TDM using hollow microneedles suitable to extract extremely small volumes (<1 nL) of interstitial fluid to measure drug concentrations. The inner lumen of a microneedle is functionalized to be used as a micro-reactor during sample collection to trap and bind target drug candidates during extraction, without requirements of sample transfer. An optofluidic device is integrated with this microneedle to rapidly quantify drug analytes with high sensitivity using a straightforward absorbance scheme. Vancomycin is currently detected by using volumes ranging between 50-100 μL with a limit of detection (LoD) of 1.35 μM. The proposed microneedle-optofluidic biosensor can detect vancomycin with a sample volume of 0.6 nL and a LoD of <100 nM, validating this painless point of care system with significant potential to reduce healthcare costs and patients suffering.

Ion-selective electrolyte-gated field-effect transistors: prerequisites for proper functioning

NASA Astrophysics Data System (ADS)

Kofler, Johannes; Schmoltner, Kerstin; List-Kratochvil, Emil J. W.

2014-10-01

Electrolyte-gated organic field-effect transistors (EGOFETs) used as transducers and amplifiers in potentiometric sensors have recently attracted a significant amount of scientific interest. For that reason, the fundamental prerequisites to achieve a proper potentiometric signal amplification and transduction are examined. First, polarizable as well as non-polarizable semiconductor- and gate-electrolyte- interface combinations are investigated by normal pulse voltammetry. The results of these measurements are correlated with the corresponding transistor characteristics, clarifying the functional principle of EGOFETs and the requirements for high signal amplification. In addition to a good electrical performance, the EGOFET-transducers should also be compatible with the targeted sensing application. Accordingly, the influence of different gate materials and electrolytes on the sensing abilities, are discussed. Even though all physical requirements are met, EGOFETs typically exhibit irreversible degradation, if the gate potential exceeds a certain level. For that reason, EGOFETs have to be operated using a constant source-drain operation mode which is presented by means of an H+ (pH) sensitive ion-sensor.

High-Throughput Nanoindentation for Statistical and Spatial Property Determination

NASA Astrophysics Data System (ADS)

Hintsala, Eric D.; Hangen, Ude; Stauffer, Douglas D.

2018-04-01

Standard nanoindentation tests are "high throughput" compared to nearly all other mechanical tests, such as tension or compression. However, the typical rates of tens of tests per hour can be significantly improved. These higher testing rates enable otherwise impractical studies requiring several thousands of indents, such as high-resolution property mapping and detailed statistical studies. However, care must be taken to avoid systematic errors in the measurement, including choosing of the indentation depth/spacing to avoid overlap of plastic zones, pileup, and influence of neighboring microstructural features in the material being tested. Furthermore, since fast loading rates are required, the strain rate sensitivity must also be considered. A review of these effects is given, with the emphasis placed on making complimentary standard nanoindentation measurements to address these issues. Experimental applications of the technique, including mapping of welds, microstructures, and composites with varying length scales, along with studying the effect of surface roughness on nominally homogeneous specimens, will be presented.

Quantifying the Influence of Lightning Strike Pressure Loading on Composite Specimen Damage

NASA Astrophysics Data System (ADS)

Foster, P.; Abdelal, G.; Murphy, A.

2018-04-01

Experimental work has shown that a component of lightning strike damage is caused by a mechanical loading. As the profile of the pressure loading is unknown a number of authors propose different pressure loads, varying in form, application area and magnitude. The objective of this paper is to investigate the potential contribution of pressure loading to composite specimen damage. This is achieved through a simulation study using an established modelling approach for composite damage prediction. The study examines the proposed shockwave loads from the literature. The simulation results are compared with measured test specimen damage examining the form and scale of damage. The results for the first time quantify the significance of pressure loading, demonstrating that although a pressure load can cause damage consistent with that measured experimentally, it has a negligible contribution to the overall scale of damage. Moreover the requirements for a pressure to create the damage behaviours typically witnessed in testing requires that the pressure load be within a very precise window of magnitude and loading area.

The ReaxFF reactive force-field: Development, applications, and future directions

DOE PAGES

Senftle, Thomas; Hong, Sungwook; Islam, Md Mahbubul; ...

2016-03-04

The reactive force-field (ReaxFF) interatomic potential is a powerful computational tool for exploring, developing and optimizing material properties. Methods based on the principles of quantum mechanics (QM), while offering valuable theoretical guidance at the electronic level, are often too computationally intense for simulations that consider the full dynamic evolution of a system. Alternatively, empirical interatomic potentials that are based on classical principles require significantly fewer computational resources, which enables simulations to better describe dynamic processes over longer timeframes and on larger scales. Such methods, however, typically require a predefined connectivity between atoms, precluding simulations that involve reactive events. The ReaxFFmore » method was developed to help bridge this gap. Approaching the gap from the classical side, ReaxFF casts the empirical interatomic potential within a bond-order formalism, thus implicitly describing chemical bonding without expensive QM calculations. As a result, this article provides an overview of the development, application, and future directions of the ReaxFF method.« less

Continuum and discrete approach in modeling biofilm development and structure: a review.

PubMed

Mattei, M R; Frunzo, L; D'Acunto, B; Pechaud, Y; Pirozzi, F; Esposito, G

2018-03-01

The scientific community has recognized that almost 99% of the microbial life on earth is represented by biofilms. Considering the impacts of their sessile lifestyle on both natural and human activities, extensive experimental activity has been carried out to understand how biofilms grow and interact with the environment. Many mathematical models have also been developed to simulate and elucidate the main processes characterizing the biofilm growth. Two main mathematical approaches for biomass representation can be distinguished: continuum and discrete. This review is aimed at exploring the main characteristics of each approach. Continuum models can simulate the biofilm processes in a quantitative and deterministic way. However, they require a multidimensional formulation to take into account the biofilm spatial heterogeneity, which makes the models quite complicated, requiring significant computational effort. Discrete models are more recent and can represent the typical multidimensional structural heterogeneity of biofilm reflecting the experimental expectations, but they generate computational results including elements of randomness and introduce stochastic effects into the solutions.

Continued Data Acquisition Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwellenbach, David

This task focused on improving techniques for integrating data acquisition of secondary particles correlated in time with detected cosmic-ray muons. Scintillation detectors with Pulse Shape Discrimination (PSD) capability show the most promise as a detector technology based on work in FY13. Typically PSD parameters are determined prior to an experiment and the results are based on these parameters. By saving data in list mode, including the fully digitized waveform, any experiment can effectively be replayed to adjust PSD and other parameters for the best data capture. List mode requires time synchronization of two independent data acquisitions (DAQ) systems: the muonmore » tracker and the particle detector system. Techniques to synchronize these systems were studied. Two basic techniques were identified: real time mode and sequential mode. Real time mode is the preferred system but has proven to be a significant challenge since two FPGA systems with different clocking parameters must be synchronized. Sequential processing is expected to work with virtually any DAQ but requires more post processing to extract the data.« less

Whirl Flutter Studies for a SSTOL Transport Demonstrator

NASA Technical Reports Server (NTRS)

Acree, C. W., Jr.; Hoffman, Krishna

2004-01-01

A proposed new class of aircraft - the Advanced Theater Transport (ATT) will combine strategic range and high payload with 'Super-STOL' (short take-off and landing) capability. It is also proposed to modify a YC-15 into a technology demonstrator with a 20-deg tilt wing; four, eight-bladed propellers; cross-shafted gearboxes and V-22 engines. These constitute a unique combination of design features that potentially affect performance, loads and whirl-mode stability (whirl flutter). NASA Ames Research Center is working with Boeing and Hamilton Sundstrand on technology challenges presented by the concept; the purpose of NASA involvement is to establish requirements for the demonstrator and for early design guidance, with emphasis on whirl flutter. CAMRAD II is being used to study the effects of various design features on whirl flutter, with special attention to areas where such features differ from existing aircraft, notably tiltrotors. Although the stability margins appear to be more than adequate, the concept requires significantly different analytical methods, principally including far more blade modes, than typically used for tiltrotors.

Design, develop and test high temperature dynamic seals for the space shuttle's aerodynamic control surfaces

NASA Technical Reports Server (NTRS)

1973-01-01

A description is given of the design, development and testing of high temperature dynamic seals for the gaps between the structure and aerodynamic control surfaces on the space shuttle. These aerodynamic seals are required to prevent high temperature airflow from damaging thermally unprotected structures and components during entry. Two seal concepts evolved a curtain seal for the spanwise elevon cove gap, and a labyrinth seal for the area above the elevon, at the gap between the end of the elevon and the fuselage. On the basis of development testing, both seal concepts were shown to be feasible for controlling internal temperatures to 350 F or less when exposed to a typical space shuttle entry environment. The curtain seal concept demonstrated excellent test results and merits strong consideration for application on the space shuttle orbiter. The labyrinth seal concept, although demonstrating significant temperature reduction characteristics, may or may not be required on the Orbiter, depending on the actual design configuration and flight environment.

Future trends in commercial and military systems

NASA Astrophysics Data System (ADS)

Bond, F. E.

Commercial and military satellite communication systems are addressed, with a review of current applications and typical communication characteristics of the space and earth segments. Drivers for the development of future commercial systems include: the pervasion of digital techniques and services, growing orbit and frequency congestion, demand for more entertainment, and the large potential market for commercial 'roof-top' service. For military systems, survivability, improved flexibility, and the need for service to small mobile terminals are the principal factors involved. Technical trends include the use of higher frequency bands, multibeam antennas and a significant increase in the application of onboard processing. Military systems will employ a variety of techniques to counter both physical and electronic threats. The use of redundant transmission paths is a particularly effective approach. Successful implementation requires transmission standards to achieve the required interoperability among the pertinent networks. For both the military and commercial sectors, the trend toward larger numbers of terminals and more complex spacecraft is still persisting.

The Evolution of the NASA Commercial Crew Program Mission Assurance Process

NASA Technical Reports Server (NTRS)

Canfield, Amy C.

2016-01-01

In 2010, the National Aeronautics and Space Administration (NASA) established the Commercial Crew Program (CCP) in order to provide human access to the International Space Station and low Earth orbit via the commercial (non-governmental) sector. A particular challenge to NASA has been how to determine that the Commercial Provider's transportation system complies with programmatic safety requirements. The process used in this determination is the Safety Technical Review Board which reviews and approves provider submitted hazard reports. One significant product of the review is a set of hazard control verifications. In past NASA programs, 100% of these safety critical verifications were typically confirmed by NASA. The traditional Safety and Mission Assurance (S&MA) model does not support the nature of the CCP. To that end, NASA S&MA is implementing a Risk Based Assurance process to determine which hazard control verifications require NASA authentication. Additionally, a Shared Assurance Model is also being developed to efficiently use the available resources to execute the verifications.

Mars Ascent Vehicle Test Requirements and Terrestrial Validation

NASA Technical Reports Server (NTRS)

Dankanich, John W.; Cathey, Henry M.; Smith, David A.

2011-01-01

The Mars robotic sample return mission has been a potential flagship mission for NASA s science mission directorate for decades. The Mars Exploration Program and the planetary science decadal survey have highlighted both the science return of the Mars Sample Return mission, but also the need for risk reduction through technology development. One of the critical elements of the MSR mission is the Mars Ascent Vehicle, which must launch the sample from the surface of Mars and place it into low Mars orbit. The MAV has significant challenges to overcome due to the Martian environments and the Entry Descent and Landing system constraints. Launch vehicles typically have a relatively low success probability for early flights, and a thorough system level validation is warranted. The MAV flight environments are challenging and in some cases impossible to replicate terrestrially. The expected MAV environments have been evaluated and a first look of potential system test options has been explored. The terrestrial flight requirements and potential validation options are presented herein.

Integrated hollow microneedle-optofluidic biosensor for therapeutic drug monitoring in sub-nanoliter volumes

PubMed Central

Ranamukhaarachchi, Sahan A.; Padeste, Celestino; Dübner, Matthias; Häfeli, Urs O.; Stoeber, Boris; Cadarso, Victor J.

2016-01-01

Therapeutic drug monitoring (TDM) typically requires painful blood drawn from patients. We propose a painless and minimally-invasive alternative for TDM using hollow microneedles suitable to extract extremely small volumes (<1 nL) of interstitial fluid to measure drug concentrations. The inner lumen of a microneedle is functionalized to be used as a micro-reactor during sample collection to trap and bind target drug candidates during extraction, without requirements of sample transfer. An optofluidic device is integrated with this microneedle to rapidly quantify drug analytes with high sensitivity using a straightforward absorbance scheme. Vancomycin is currently detected by using volumes ranging between 50–100 μL with a limit of detection (LoD) of 1.35 μM. The proposed microneedle-optofluidic biosensor can detect vancomycin with a sample volume of 0.6 nL and a LoD of <100 nM, validating this painless point of care system with significant potential to reduce healthcare costs and patients suffering. PMID:27380889

A hybrid life cycle inventory of nano-scale semiconductor manufacturing.

PubMed

Krishnan, Nikhil; Boyd, Sarah; Somani, Ajay; Raoux, Sebastien; Clark, Daniel; Dornfeld, David

2008-04-15

The manufacturing of modern semiconductor devices involves a complex set of nanoscale fabrication processes that are energy and resource intensive, and generate significant waste. It is important to understand and reduce the environmental impacts of semiconductor manufacturing because these devices are ubiquitous components in electronics. Furthermore, the fabrication processes used in the semiconductor industry are finding increasing application in other products, such as microelectromechanical systems (MEMS), flat panel displays, and photovoltaics. In this work we develop a library of typical gate-to-gate materials and energy requirements, as well as emissions associated with a complete set of fabrication process models used in manufacturing a modern microprocessor. In addition, we evaluate upstream energy requirements associated with chemicals and materials using both existing process life cycle assessment (LCA) databases and an economic input-output (EIO) model. The result is a comprehensive data set and methodology that may be used to estimate and improve the environmental performance of a broad range of electronics and other emerging applications that involve nano and micro fabrication.

Effects of target typicality on categorical search.

PubMed

Maxfield, Justin T; Stalder, Westri D; Zelinsky, Gregory J

2014-10-01

The role of target typicality in a categorical visual search task was investigated by cueing observers with a target name, followed by a five-item target present/absent search array in which the target images were rated in a pretest to be high, medium, or low in typicality with respect to the basic-level target cue. Contrary to previous work, we found that search guidance was better for high-typicality targets compared to low-typicality targets, as measured by both the proportion of immediate target fixations and the time to fixate the target. Consistent with previous work, we also found an effect of typicality on target verification times, the time between target fixation and the search judgment; as target typicality decreased, verification times increased. To model these typicality effects, we trained Support Vector Machine (SVM) classifiers on the target categories, and tested these on the corresponding specific targets used in the search task. This analysis revealed significant differences in classifier confidence between the high-, medium-, and low-typicality groups, paralleling the behavioral results. Collectively, these findings suggest that target typicality broadly affects both search guidance and verification, and that differences in typicality can be predicted by distance from an SVM classification boundary. © 2014 ARVO.

A Retrospective Video Analysis of Canonical Babbling and Volubility in Infants with Fragile X Syndrome at 9-12 Months of Age.

PubMed

Belardi, Katie; Watson, Linda R; Faldowski, Richard A; Hazlett, Heather; Crais, Elizabeth; Baranek, Grace T; McComish, Cara; Patten, Elena; Oller, D Kimbrough

2017-04-01

An infant's vocal capacity develops significantly during the first year of life. Research suggests early measures of pre-speech development, such as canonical babbling and volubility, can differentiate typical versus disordered development. This study offers a new contribution by comparing early vocal development in 10 infants with Fragile X syndrome and 14 with typical development. Results suggest infants with Fragile X syndrome produce fewer syllables and have significantly lower canonical babbling ratios compared to infants who are typically developing. Furthermore, the particular measures of babbling were strong predictors of group membership, adding evidence regarding the possible utility of these markers in early identification.

Early erythropoietin for preventing red blood cell transfusion in preterm and/or low birth weight infants.

PubMed

Ohlsson, Arne; Aher, Sanjay M

2014-04-26

Low plasma levels of erythropoietin (EPO) in preterm infants provide a rationale for the use of EPO to prevent or treat anaemia. To assess the effectiveness and safety of early initiation of EPO or darepoetin (initiated before eight days after birth) in reducing red blood cell (RBC) transfusions in preterm and/orlow birth weight infants. The Cochrane Library, MEDLINE, EMBASE, CINAHL, reference lists of identified trials and reviews, Pediatric Academic Societies Annual meetings 2000 to 2013 (Abstracts2View(TM)) and clinical trials registries (clinicaltrials.gov; controlled-trials.com; and who.int/ictrp) were searched in July 2013. Randomised or quasi-randomised controlled trials of early (< eight days of age) initiation of EPO treatment versus placebo or no intervention in preterm and/or low birth weightinfants. The methods of the Neonatal Cochrane Review Group were used. The updated review includes 27 studies enrolling 2209 infants. One study enrolling infants at a mean age of > eight days and one duplicate publication were excluded. One new study using darepoetin was identified.Early EPO reduced the risk of the 'use of one or more RBC transfusions' (typical risk ratio (RR) 0.79, 95% confidence interval (CI) 0.73 to 0.85; typical risk difference (RD) -0.14, 95% CI -0.18 to -0.10; I(2) = 54% for both; number needed to treat to benefit (NNTB) 7, 95% CI 6 to 10; 16 studies, 1661 infants).The total volume of RBCs transfused per infant was reduced (typical mean difference (MD) 7 mL/kg, 95% CI -12 to - 2; I(2) = 63%; 7 studies, 581 infants). The number of RBC transfusions per infant was minimally reduced (typical MD -0.27, 95% CI -0.42 to -0.12; I(2) = 64%; 13 studies, 951 infants). The number of donors to whom the infants were exposed was significantly reduced (MD-0.54, 95% CI -0.89 to -0.20; I(2) = 0%; 3 studies, 254 infants).There was a non-significant increase in the risk of stage ≥ 3 retinopathy of prematurity (ROP) with early EPO (typical RR 1.37, 95% CI 0.87 to 2.17; I(2) = 0%; typical RD 0.03, 95% CI -0.01 to 0.06; I(2) = 29%; 7 studies, 801 infants). A post hoc analysis including all studies that reported on ROP stage ≥ 3, regardless of the age of the infant when EPO treatment was started, showed a significantly increased typical RR of 1.48 (95% CI 1.02 to 2.13; P = 0.04; I(2) = 0%) and typical RD of 0.03 (95% CI 0.00 to 0.06; P = 0.03; I(2) = 50%; 10 studies, 1303 infants) with a number needed to treat to harm (NNTH) of 33 (95% CI 17 to infinity). In an Italian study in which the authors compared the use of early intravenous EPO with subcutaneous EPO the overall incidence of stage ≥ 3 was 15%, similar to the incidence of 17% in the study by Romagnoli and co-workers.The rates for mortality and morbidities including intraventricular haemorrhage and necrotizing enterocolitis were not significantly changed by early EPO treatment. Neurodevelopmental outcomes at 18 to 22 months varied. Early administration of EPO reduces the use of RBC transfusions, the volume of RBCs transfused, and donor exposure after study entry. The small reductions are likely to be of limited clinical importance. Donor exposure is probably not avoided since all but one study included infants who had received RBC transfusions prior to trial entry. In this update there was no significant increase in the rate of ROP (stage ≥ 3) for studies that initiated EPO treatment at less than eight days of age. In a post hoc analysis including all studies that reported on ROP stage ≥ 3 regardless of age at initiation of treatment there was an increased risk of ROP. The rates for mortality and morbidities including intraventricular haemorrhage and necrotizing enterocolitis were not significantly changed by early EPO treatment. Neurodevelopmental outcomes at 18 to 22 months vary in the studies published to date. Ongoing research should deal with the issue of ROP and evaluate current clinical practice that will limit donor exposure. Due to the limited benefits and the possibly increased risk of ROP, administration of EPO is not recommended. Darbepoetin requires further study. The possible neuroprotective role of EPO in neonates will be reviewed in separate Cochrane reviews.

Neural Correlates of Letter Reversal in Children and Adults

PubMed Central

Kalra, Priya; Yee, Debbie; Sinha, Pawan; Gabrieli, John D. E.

2014-01-01

Children often make letter reversal errors when first learning to read and write, even for letters whose reversed forms do not appear in normal print. However, the brain basis of such letter reversal in children learning to read is unknown. The present study compared the neuroanatomical correlates (via functional magnetic resonance imaging) and the electrophysiological correlates (via event-related potentials or ERPs) of this phenomenon in children, ages 5–12, relative to young adults. When viewing reversed letters relative to typically oriented letters, adults exhibited widespread occipital, parietal, and temporal lobe activations, including activation in the functionally localized visual word form area (VWFA) in left occipito-temporal cortex. Adults exhibited significantly greater activation than children in all of these regions; children only exhibited such activation in a limited frontal region. Similarly, on the P1 and N170 ERP components, adults exhibited significantly greater differences between typical and reversed letters than children, who failed to exhibit significant differences between typical and reversed letters. These findings indicate that adults distinguish typical and reversed letters in the early stages of specialized brain processing of print, but that children do not recognize this distinction during the early stages of processing. Specialized brain processes responsible for early stages of letter perception that distinguish between typical and reversed letters may develop slowly and remain immature even in older children who no longer produce letter reversals in their writing. PMID:24859328

The components of working memory updating: an experimental decomposition and individual differences.

PubMed

Ecker, Ullrich K H; Lewandowsky, Stephan; Oberauer, Klaus; Chee, Abby E H

2010-01-01

Working memory updating (WMU) has been identified as a cognitive function of prime importance for everyday tasks and has also been found to be a significant predictor of higher mental abilities. Yet, little is known about the constituent processes of WMU. We suggest that operations required in a typical WMU task can be decomposed into 3 major component processes: retrieval, transformation, and substitution. We report a large-scale experiment that instantiated all possible combinations of those 3 component processes. Results show that the 3 components make independent contributions to updating performance. We additionally present structural equation models that link WMU task performance and working memory capacity (WMC) measures. These feature the methodological advancement of estimating interindividual covariation and experimental effects on mean updating measures simultaneously. The modeling results imply that WMC is a strong predictor of WMU skills in general, although some component processes-in particular, substitution skills-were independent of WMC. Hence, the reported predictive power of WMU measures may rely largely on common WM functions also measured in typical WMC tasks, although substitution skills may make an independent contribution to predicting higher mental abilities. (PsycINFO Database Record (c) 2009 APA, all rights reserved).

Disgust sensitivity and the 'non-rational' aspects of a career choice in surgery.

PubMed

Consedine, Nathan S; Yu, Tzu-Chieh; Hill, Andrew G; Windsor, John A

2013-03-15

Fitting trainee physicians to career paths remains an ongoing challenge in a highly fluid health workforce environment. Studies attempting to explain low interest in surgical careers have typically examined the relative impact of career and lifestyle values. The current work argues that emotional proclivities are potentially more important and that disgust sensitivity may help explain both low surgical interest as well as the tendency for female students to avoid surgical careers. 216 medical students attending a required course in human behaviour completed measures of career intention, traditional predictors of career intention and dispositional disgust sensitivity. As predicted, logistic regression showed that greater disgust sensitivity predicted lower surgical career intention even when controlling for traditional career values (OR=0.45, 95%CI=0.21-0.95). Additionally, the gender effect indexing low female interest in surgical careers was no longer significant once disgust sensitivity was added to the model. The impact of disgust sensitivity on surgical interest was substantial and on par with established predictors of career intention. Disgust sensitivity may represent a potentially modifiable factor impacting surgical career choice, particularly among female students who are typically more disgust sensitive.

Salvinia-Effect-Inspired "Sticky" Superhydrophobic Surfaces by Meniscus-Confined Electrodeposition.

PubMed

Zheng, Deyin; Jiang, Youhua; Yu, Wentao; Jiang, Xiufen; Zhao, Xin; Choi, Chang-Hwan; Sun, Guangyi

2017-11-28

Inspired by the Salvinia effect, we report the fabrication and characterization of a novel "sticky" superhydrophobic surface sustaining a Cassie-Baxter wetting state for water droplets with high contact angles but strong solid-liquid retention. Unlike superhydrophobic surfaces mimicking the lotus or petal effect, whose hydrophobicity and droplet retention are typically regulated by hierarchical micro- and nanostructures made of a homogeneous material with the same surface energy, our superhydrophobic surface merely requires singular microstructures covered with a hydrophobic coating but creatively coupled with hydrophilic tips with different surface energy. Hydrophilic tips are selectively formed by meniscus-confined electrodeposition of a metal (e.g., nickel) layer on top of hydrophobic microstructures. During the electrodeposition process, the superhydrophobic surface retains its plastron so that the electrolyte cannot penetrate into the cavity of hydrophobic microstructures, consequently making the electrochemical reaction between solid and electrolyte occur only on the tip. In contrast to typical superhydrophobic surfaces where droplets are highly mobile, the "sticky" superhydrophobic surface allows a water droplet to have strong local pinning and solid-liquid retention on the hydrophilic tips, which is of great significance in many droplet behaviors such as evaporation.

Effects of cure temperature, electron radiation, and thermal cycling on P75/930 composites

NASA Technical Reports Server (NTRS)

Funk, Joan G.

1990-01-01

Graphite/epoxy composites are candidates for future space structures due to high stiffness and dimensional stability requirements of these structures. Typical graphite/epoxy composites are brittle and have high residual stresses which often result in microcracking during the thermal cycling typical of the space environment. Composite materials used in geosynchronous orbit applications will also be exposed to high levels of radiation. The purpose of the present study was to determine the effects of cure temperature and radiation exposure on the shear strength and thermal cycling-induced microcrack density of a high modulus, 275 F cure epoxy, P75/930. The results from the P75/930 are compared to previously reported data on P75/934 and T300/934 where 934 is a standard 350 F cure epoxy. The results of this study reveal that P75/930 is significantly degraded by total doses of electron radiation greater than 10(exp 8) rads and by thermally cycling between -250 F and 150 F. The P75/930 did not have improved microcrack resistance over the P75/934, and the 930 resin system appears to be more sensitive to electron radiation-induced degradation than the 934 resin system.

Profiling online recreational/prescription drugs' customers and overview of drug vending virtual marketplaces.

PubMed

Orsolini, Laura; Francesconi, Giulia; Papanti, Duccio; Giorgetti, Arianna; Schifano, Fabrizio

2015-07-01

Internet and social networking sites play a significant role in the marketing and distribution of recreational/prescription drugs without restrictions. We aimed here at reviewing data relating to the profile of the online drug customer and at describing drug vending websites. The PubMed, Google Scholar, and Scopus databases were searched here in order to elicit data on the socio-demographic characteristics of the recreational marketplaces/online pharmacies' customers and the determinants relating to online drug purchasing activities. Typical online recreational drugs' customers seem to be Caucasian, men, in their 20s, highly educated, and using the web to impact as minimally as possible on their existing work/professional status. Conversely, people without any health insurance seemed to look at the web as a source of more affordable prescription medicines. Drug vending websites are typically presented here with a "no prescription required" approach, together with aggressive marketing strategies. The online availability of recreational/prescriptions drugs remains a public health concern. A more precise understanding of online vending sites' customers may well facilitate the drafting and implementation of proper prevention campaigns aimed at counteracting the increasing levels of online drug acquisition and hence intake activities. Copyright © 2015 John Wiley & Sons, Ltd.

Aeroelastic Ground Wind Loads Analysis Tool for Launch Vehicles

NASA Technical Reports Server (NTRS)

Ivanco, Thomas G.

2016-01-01

Launch vehicles are exposed to ground winds during rollout and on the launch pad that can induce static and dynamic loads. Of particular concern are the dynamic loads caused by vortex shedding from nearly-cylindrical structures. When the frequency of vortex shedding nears that of a lowly-damped structural mode, the dynamic loads can be more than an order of magnitude greater than mean drag loads. Accurately predicting vehicle response to vortex shedding during the design and analysis cycles is difficult and typically exceeds the practical capabilities of modern computational fluid dynamics codes. Therefore, mitigating the ground wind loads risk typically requires wind-tunnel tests of dynamically-scaled models that are time consuming and expensive to conduct. In recent years, NASA has developed a ground wind loads analysis tool for launch vehicles to fill this analytical capability gap in order to provide predictions for prelaunch static and dynamic loads. This paper includes a background of the ground wind loads problem and the current state-of-the-art. It then discusses the history and significance of the analysis tool and the methodology used to develop it. Finally, results of the analysis tool are compared to wind-tunnel and full-scale data of various geometries and Reynolds numbers.

Ultrasonographic findings in hereditary neuropathy with liability to pressure palsies.

PubMed

Bayrak, Ayse O; Bayrak, Ilkay Koray; Battaloglu, Esra; Ozes, Burcak; Yildiz, Onur; Onar, Musa Kazim

2015-02-01

The aims of this study were to evaluate the sonographic findings of patients with hereditary neuropathy with liability to pressure palsies (HNPP) and to examine the correlation between sonographic and electrophysiological findings. Nine patients whose electrophysiological findings indicated HNPP and whose diagnosis was confirmed by genetic analysis were enrolled in the study. The median, ulnar, peroneal, and tibial nerves were evaluated by ultrasonography. We ultrasonographically evaluated 18 median, ulnar, peroneal, and tibial nerves. Nerve enlargement was identified in the median, ulnar, and peroneal nerves at the typical sites of compression. None of the patients had nerve enlargement at a site of noncompression. None of the tibial nerves had increased cross-sectional area (CSA) values. There were no significant differences in median, ulnar, and peroneal nerve distal motor latencies (DMLs) between the patients with an increased CSA and those with a normal CSA. In most cases, there was no correlation between electrophysiological abnormalities and clinical or sonographic findings. Although multiple nerve enlargements at typical entrapment sites on sonographic evaluation can suggest HNPP, ultrasonography cannot be used as a diagnostic tool for HNPP. Ultrasonography may contribute to the differential diagnosis of HNPP and other demyelinating polyneuropathies or compression neuropathies; however, further studies are required.

Multivariate statistical monitoring as applied to clean-in-place (CIP) and steam-in-place (SIP) operations in biopharmaceutical manufacturing.

PubMed

Roy, Kevin; Undey, Cenk; Mistretta, Thomas; Naugle, Gregory; Sodhi, Manbir

2014-01-01

Multivariate statistical process monitoring (MSPM) is becoming increasingly utilized to further enhance process monitoring in the biopharmaceutical industry. MSPM can play a critical role when there are many measurements and these measurements are highly correlated, as is typical for many biopharmaceutical operations. Specifically, for processes such as cleaning-in-place (CIP) and steaming-in-place (SIP, also known as sterilization-in-place), control systems typically oversee the execution of the cycles, and verification of the outcome is based on offline assays. These offline assays add to delays and corrective actions may require additional setup times. Moreover, this conventional approach does not take interactive effects of process variables into account and cycle optimization opportunities as well as salient trends in the process may be missed. Therefore, more proactive and holistic online continued verification approaches are desirable. This article demonstrates the application of real-time MSPM to processes such as CIP and SIP with industrial examples. The proposed approach has significant potential for facilitating enhanced continuous verification, improved process understanding, abnormal situation detection, and predictive monitoring, as applied to CIP and SIP operations. © 2014 American Institute of Chemical Engineers.

Shape optimization techniques for musical instrument design

NASA Astrophysics Data System (ADS)

Henrique, Luis; Antunes, Jose; Carvalho, Joao S.

2002-11-01

The design of musical instruments is still mostly based on empirical knowledge and costly experimentation. One interesting improvement is the shape optimization of resonating components, given a number of constraints (allowed parameter ranges, shape smoothness, etc.), so that vibrations occur at specified modal frequencies. Each admissible geometrical configuration generates an error between computed eigenfrequencies and the target set. Typically, error surfaces present many local minima, corresponding to suboptimal designs. This difficulty can be overcome using global optimization techniques, such as simulated annealing. However these methods are greedy, concerning the number of function evaluations required. Thus, the computational effort can be unacceptable if complex problems, such as bell optimization, are tackled. Those issues are addressed in this paper, and a method for improving optimization procedures is proposed. Instead of using the local geometric parameters as searched variables, the system geometry is modeled in terms of truncated series of orthogonal space-funcitons, and optimization is performed on their amplitude coefficients. Fourier series and orthogonal polynomials are typical such functions. This technique reduces considerably the number of searched variables, and has a potential for significant computational savings in complex problems. It is illustrated by optimizing the shapes of both current and uncommon marimba bars.

Speech abilities in preschool children with speech sound disorder with and without co-occurring language impairment.

PubMed

Macrae, Toby; Tyler, Ann A

2014-10-01

The authors compared preschool children with co-occurring speech sound disorder (SSD) and language impairment (LI) to children with SSD only in their numbers and types of speech sound errors. In this post hoc quasi-experimental study, independent samples t tests were used to compare the groups in the standard score from different tests of articulation/phonology, percent consonants correct, and the number of omission, substitution, distortion, typical, and atypical error patterns used in the production of different wordlists that had similar levels of phonetic and structural complexity. In comparison with children with SSD only, children with SSD and LI used similar numbers but different types of errors, including more omission patterns ( p < .001, d = 1.55) and fewer distortion patterns ( p = .022, d = 1.03). There were no significant differences in substitution, typical, and atypical error pattern use. Frequent omission error pattern use may reflect a more compromised linguistic system characterized by absent phonological representations for target sounds (see Shriberg et al., 2005). Research is required to examine the diagnostic potential of early frequent omission error pattern use in predicting later diagnoses of co-occurring SSD and LI and/or reading problems.

The Diabetic Foot Attack: "'Tis Too Late to Retreat!"

PubMed

Vas, Prashanth R J; Edmonds, Michael; Kavarthapu, Venu; Rashid, Hisham; Ahluwalia, Raju; Pankhurst, Christian; Papanas, Nikolaos

2018-03-01

The "diabetic foot attack" is one of the most devastating presentations of diabetic foot disease, typically presenting as an acutely inflamed foot with rapidly progressive skin and tissue necrosis, at times associated with significant systemic symptoms. Without intervention, it may escalate over hours to limb-threatening proportions and poses a high amputation risk. There are only best practice approaches but no international protocols to guide management. Immediate recognition of a typical infected diabetic foot attack, predominated by severe infection, with prompt surgical intervention to debride all infected tissue alongside broad-spectrum antibiotic therapy is vital to ensure both limb and patient survival. Postoperative access to multidisciplinary and advanced wound care therapies is also necessary. More subtle forms exist: these include the ischemic diabetic foot attack and, possibly, in a contemporary categorization, acute Charcot neuroarthropathy. To emphasize the importance of timely action especially in the infected and ischemic diabetic foot attack, we revisit the concept of "time is tissue" and draw parallels with advances in acute myocardial infarction and stroke care. At the moment, international protocols to guide management of severe diabetic foot presentations do not specifically use the term. However, we believe that it may help increase awareness of the urgent actions required in some situations.

Manual fire suppression methods on typical machinery space spray fires

NASA Astrophysics Data System (ADS)

Carhart, H. W.; Leonard, J. T.; Budnick, E. K.; Ouellette, R. J.; Shanley, J. H., Jr.

1990-07-01

A series of tests was conducted to evaluate the effectiveness of Aqueous Film Forming Foam (AFFF), potassium bicarbonate powder (PKP) and Halon 1211, alone and in various combinations, in extinguishing spray fires. The sprays were generated by JP-5 jet fuel issuing from an open sounding tube, and open petcock, a leaking flange or a slit pipe, and contacting an ignition source. The results indicate that typical fuel spray fires, such as those simulated in this series, are very severe. Flame heights ranged from 6.1 m (20 ft) for the split pipe to 15.2 m (50 ft) for the sounding tube scenario. These large flame geometries were accompanied by heat release rates of 6 MW to greater than 50 MW, and hazardous thermal radiation levels in the near field environment, up to 9.1 m (30 ft) away. Successful suppression of these fires requires both a significant reduction in flame radiation and delivery of a suppression agent to shielded areas. Of the nine suppression methods tested, the 95 gpm AFFF hand line and the hand line in conjunction with PKP were particularly effective in reducing the radiant flux.

Experimental and analytical investigation of a freezing point depressant fluid ice protection system. M.S. Thesis. Final Report

NASA Technical Reports Server (NTRS)

Albright, A. E.

1984-01-01

A glycol-exuding porous leading edge ice protection system was tested in the NASA Icing Research Tunnel. Stainless steel mesh, laser drilled titanium, and composite panels were tested on two general aviation wing sections. Two different glycol-water solutions were evaluated. Minimum glycol flow rates required for anti-icing were obtained as a function of angle of attack, liquid water content, volume median drop diameter, temperature, and velocity. Ice accretions formed after five minutes of icing were shed in three minutes or less using a glycol fluid flow equal to the anti-ice flow rate. Two methods of predicting anti-ice flow rates are presented and compared with a large experimental data base of anti-ice flow rates over a wide range of icing conditions. The first method presented in the ADS-4 document typically predicts flow rates lower than the experimental flow rates. The second method, originally published in 1983, typically predicts flow rates up to 25 percent higher than the experimental flow rates. This method proved to be more consistent between wing-panel configurations. Significant correlation coefficients between the predicted flow rates and the experimental flow rates ranged from .867 to .947.

Cultural concepts of tuberculosis and gender among the general population without tuberculosis in rural Maharashtra, India.

PubMed

Atre, Sachin R; Kudale, Abhay M; Morankar, Sudhakar N; Rangan, Sheela G; Weiss, Mitchell G

2004-11-01

Gender-specific patterns of experience, meaning, and behaviour for tuberculosis (TB) require consideration to guide control programmes. To clarify concepts of gender, culture, and TB in a rural endemic population of Maharashtra, India, this study of 80 men and 80 women employed qualitative and quantitative methods of cultural epidemiology, using a locally adapted semi-structured Explanatory Model Interview Catalogue (EMIC) interviews are instruments for cultural epidemiological study of the distribution of illness-related experiences, meanings, and behaviours. This interview queried respondents without active disease about vignettes depicting a man and woman with typical features of TB. Emotional and social symptoms were frequently reported for both vignettes, but more often considered most distressing for the female vignette; specified problems included arranging marriages, social isolation, and inability to care for children and family. Job loss and reduced income were regarded most troubling for the male vignette. Men and women typically identified sexual experience as the cause of TB for opposite-sex vignettes. With wider access to information about TB, male respondents more frequently recommended allopathic doctors and specialty services. Discussion considers the practical significance of gender-specific cultural concepts of TB.

An Adaptive Memory Interface Controller for Improving Bandwidth Utilization of Hybrid and Reconfigurable Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Castellana, Vito G.; Tumeo, Antonino; Ferrandi, Fabrizio

Emerging applications such as data mining, bioinformatics, knowledge discovery, social network analysis are irregular. They use data structures based on pointers or linked lists, such as graphs, unbalanced trees or unstructures grids, which generates unpredictable memory accesses. These data structures usually are large, but difficult to partition. These applications mostly are memory bandwidth bounded and have high synchronization intensity. However, they also have large amounts of inherent dynamic parallelism, because they potentially perform a task for each one of the element they are exploring. Several efforts are looking at accelerating these applications on hybrid architectures, which integrate general purpose processorsmore » with reconfigurable devices. Some solutions, which demonstrated significant speedups, include custom-hand tuned accelerators or even full processor architectures on the reconfigurable logic. In this paper we present an approach for the automatic synthesis of accelerators from C, targeted at irregular applications. In contrast to typical High Level Synthesis paradigms, which construct a centralized Finite State Machine, our approach generates dynamically scheduled hardware components. While parallelism exploitation in typical HLS-generated accelerators is usually bound within a single execution flow, our solution allows concurrently running multiple execution flow, thus also exploiting the coarser grain task parallelism of irregular applications. Our approach supports multiple, multi-ported and distributed memories, and atomic memory operations. Its main objective is parallelizing as many memory operations as possible, independently from their execution time, to maximize the memory bandwidth utilization. This significantly differs from current HLS flows, which usually consider a single memory port and require precise scheduling of memory operations. A key innovation of our approach is the generation of a memory interface controller, which dynamically maps concurrent memory accesses to multiple ports. We present a case study on a typical irregular kernel, Graph Breadth First search (BFS), exploring different tradeoffs in terms of parallelism and number of memories.« less

Mother-child play: children with Down syndrome and typical development.

PubMed

Venuti, P; de Falco, S; Esposito, G; Bornstein, Marc H

2009-07-01

Child solitary and collaborative mother-child play with 21 children with Down syndrome and 33 mental-age-matched typically developing children were compared. In solitary play, children with Down syndrome showed less exploratory but similar symbolic play compared to typically developing children. From solitary to collaborative play, children with Down syndrome increased their exploratory play, attaining the same level as typically developing children. Pretense significantly increased from solitary to collaborative play only in typically developing children. Differences between mothers' play in the two groups mirrored those between their children. Both groups showed similar attunement and synchrony. Mothers contribute to the play development of children with Down syndrome through their own adaptation to their children's limitations and potentialities.

Multifrequency Retrieval of Cloud Ice Particle Size Distributions

DTIC Science & Technology

2005-01-01

distribution ( Testud et al., 2001) to represent the PSD. The normalized gamma distribution has several advantages over a typical gamma PSD. A typical gamma...variation correlated with variation in ýL ( Testud et al., 2001). This variation on N, with P, requires a priori restrictions on the variance in R in...Geoscience & Rem. Sensing, 40, 541-549. Testud , J., S. Oury, R. A. Black, P. Amayenc, and X. Dou, 2001: The Concept of "Normalized" Distibution to Describe

Energy Use Savings for a Typical New Residential Dwelling Unit Based on the 2009 and 2012 IECC as Compared to the 2006 IECC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lucas, Robert G.; Mendon, Vrushali V.; Goel, Supriya

2012-06-01

The 2009 and 2012 International Energy Conservation Codes (IECC) require a substantial improvement in energy efficiency compared to the 2006 IECC. This report averages the energy use savings for a typical new residential dwelling unit based on the 2009 and 2012 IECC compared to the 2006 IECC. Results are reported by the eight climate zones in the IECC and for the national average.

Medium Deep High Temperature Heat Storage

NASA Astrophysics Data System (ADS)

Bär, Kristian; Rühaak, Wolfram; Schulte, Daniel; Welsch, Bastian; Chauhan, Swarup; Homuth, Sebastian; Sass, Ingo

2015-04-01

Heating of buildings requires more than 25 % of the total end energy consumption in Germany. Shallow geothermal systems for indirect use as well as shallow geothermal heat storage systems like aquifer thermal energy storage (ATES) or borehole thermal energy storage (BTES) typically provide low exergy heat. The temperature levels and ranges typically require a coupling with heat pumps. By storing hot water from solar panels or thermal power stations with temperatures of up to 110 °C a medium deep high temperature heat storage (MDHTS) can be operated on relatively high temperature levels of more than 45 °C. Storage depths of 500 m to 1,500 m below surface avoid conflicts with groundwater use for drinking water or other purposes. Permeability is typically also decreasing with greater depth; especially in the crystalline basement therefore conduction becomes the dominant heat transport process. Solar-thermal charging of a MDHTS is a very beneficial option for supplying heat in urban and rural systems. Feasibility and design criteria of different system configurations (depth, distance and number of BHE) are discussed. One system is designed to store and supply heat (300 kW) for an office building. The required boreholes are located in granodioritic bedrock. Resulting from this setup several challenges have to be addressed. The drilling and completion has to be planned carefully under consideration of the geological and tectonical situation at the specific site.

Postdoctoral training in clinical neuropsychology in America: how did we get here and where do recent applicants suggest we go next?

PubMed

Bodin, Doug; Butts, Alissa M; Grote, Christopher L

2016-11-01

The United States appears to be the only country which typically requires completion of a two-year postdoctoral fellowship for one to be considered competent to practice clinical neuropsychology. We review the history of how this came to be in the United States. Further, we describe obstacles that postdoctoral trainees face during this stage of training. We first describe the most significant events leading to the requirement of a two-year fellowship in clinical neuropsychology. Next, we describe factors that trainees face when selecting and completing postdoctoral training. Finally, we review the results of the most recent annual survey of applicants for postdoctoral training to measure their experiences. Postdoctoral training in the United States is a relatively recent requirement in neuropsychology. Trainees face many obstacles when obtaining a postdoctoral position some of which can be addressed by the field. Training in Clinical Neuropsychology in the United States has evolved considerably over at least the last 45 or so years to the point that a two-year postdoctoral fellowship is now required for one to be a candidate for board certification through the American Board of Clinical Neuropsychology. We review many of the challenges that postdoctoral trainees face and provide survey data to describe their experiences and preferences.

Suitability of representative electrochemical energy storage technologies for ramp-rate control of photovoltaic power

NASA Astrophysics Data System (ADS)

Jiang, Yu; Fletcher, John; Burr, Patrick; Hall, Charles; Zheng, Bowen; Wang, Da-Wei; Ouyang, Zi; Lennon, Alison

2018-04-01

Photovoltaic (PV) systems can exhibit rapid variances in their power output due to irradiance changes which can destabilise an electricity grid. This paper presents a quantitative comparison of the suitability of different electrochemical energy storage system (ESS) technologies to provide ramp-rate control of power in PV systems. Our investigations show that, for PV systems ranging from residential rooftop systems to megawatt power systems, lithium-ion batteries with high energy densities (up to 600 Wh L-1) require the smallest power-normalised volumes to achieve the ramp rate limit of 10% min-1 with 100% compliance. As the system size increases, the ESS power-normalised volume requirements are significantly reduced due to aggregated power smoothing, with high power lithium-ion batteries becoming increasingly more favourable with increased PV system size. The possibility of module-level ramp-rate control is also introduced, and results show that achievement of a ramp rate of 10% min-1 with 100% compliance with typical junction box sizes will require ESS energy and power densities of 400 Wh L-1 and 2300 W L-1, respectively. While module-level ramp-rate control can reduce the impact of solar intermittence, the requirement is challenging, especially given the need for low cost and long cycle life.

First test of a high voltage feedthrough for liquid Argon TPCs connected to a 300 kV power supply

NASA Astrophysics Data System (ADS)

Cantini, C.; Gendotti, A.; Molina Bueno, L.; Murphy, S.; Radics, B.; Regenfus, C.; Rigaut, Y.-A.; Rubbia, A.; Sergiampietri, F.; Viant, T.; Wu, S.

2017-03-01

Voltages above a hundred kilo-volt will be required to generate the drift field of future very large liquid Argon Time Projection Chambers. One of the most delicate component is the feedthrough whose role is to safely deliver the very high voltage to the cathode through the thick insulating walls of the cryostat without compromising the purity of the argon inside. This requires a feedthrough that is typically meters long and carefully designed to be vacuum tight and have small heat input. Furthermore, all materials should be carefully chosen to allow operation in cryogenic conditions. In addition, electric fields in liquid argon should be kept below a threshold to reduce risks of discharges. The combination of all above requirements represents significant challenges from the design and manufacturing perspective. In this paper, we report on the successful operation of a feedthrough satisfying all the above requirements. The details of the feedthrough design and its manufacturing steps are provided. Very high voltages up to unprecedented voltages of -300 kV could be applied during long periods repeatedly. A source of instability was observed, which was specific to the setup configuration which was used for the test and not due to the feedthrough itself.

What limits the achievable areal densities of large aperture space telescopes?

NASA Astrophysics Data System (ADS)

Peterson, Lee D.; Hinkle, Jason D.

2005-08-01

This paper examines requirements trades involving areal density for large space telescope mirrors. A segmented mirror architecture is used to define a quantitative example that leads to relevant insight about the trades. In this architecture, the mirror consists of segments of non-structural optical elements held in place by a structural truss that rests behind the segments. An analysis is presented of the driving design requirements for typical on-orbit loads and ground-test loads. It is shown that the driving on-orbit load would be the resonance of the lowest mode of the mirror by a reaction wheel static unbalance. The driving ground-test load would be dynamics due to ground-induced random vibration. Two general conclusions are derived from these results. First, the areal density that can be allocated to the segments depends on the depth allocated to the structure. More depth in the structure allows the allocation of more mass to the segments. This, however, leads to large structural depth that might be a significant development challenge. Second, the requirement for ground-test-ability results in an order of magnitude or more depth in the structure than is required by the on-orbit loads. This leads to the proposition that avoiding ground test as a driving requirement should be a fundamental technology on par with the provision of deployable depth. Both are important structural challenges for these future systems.

Seed Heteromorphism and Effects of Light and Abiotic Stress on Germination of a Typical Annual Halophyte Salsola ferganica in Cold Desert

PubMed Central

Ma, Yali; Wang, Juan; Zhang, Jinghua; Zhang, Shiyue; Liu, Yanxia; Lan, Haiyan

2018-01-01

Seed heteromorphism is a common characteristic of halophyte and an adaptation to the spatial and temporal variations of natural habitats. Differences in dormancy and germination requirements have been documented in heteromorphic seeds of many species, but the mechanisms for maintenance between different status in various populations have not been well-understood. Salsola ferganica is a typical annual halophyte in Chenopodiaceae distributed in cold desert, in the present study, we found that it could produce three distinct types of seed according to the shape and size of winged perianth (WP), which differed in dispersal ability, dormancy and germination behaviors. Our further investigation revealed that light could significantly promote germination of heteromorphic seeds of S. ferganica, and WP inhibited while GA3 enhanced germination, which suggests that S. ferganica seeds possessed a photo-sensitive combined with morphological and non-deep physiological dormancy type, in which light was the dominant factor. Not like other desert plant species, the germinability of heteromorphic seeds of S. ferganica could not sustain for long (only 1–2 years), especially the small seeds, and was affected by storage time, temperature, salinity, even the environmental conditions of the maternal plant. Thus, the differences of characteristics existed among heteromorphic seeds and variations of heteromorphic ratio among different calendar years were presumed as diverse adaptation strategies integrated in the individual mother plant, and might apply important ecological significance for successful reproduction of the species in the unpredictable cold desert. PMID:29387073

Development of visuo-haptic transfer for object recognition in typical preschool and school-aged children.

PubMed

Purpura, Giulia; Cioni, Giovanni; Tinelli, Francesca

2018-07-01

Object recognition is a long and complex adaptive process and its full maturation requires combination of many different sensory experiences as well as cognitive abilities to manipulate previous experiences in order to develop new percepts and subsequently to learn from the environment. It is well recognized that the transfer of visual and haptic information facilitates object recognition in adults, but less is known about development of this ability. In this study, we explored the developmental course of object recognition capacity in children using unimodal visual information, unimodal haptic information, and visuo-haptic information transfer in children from 4 years to 10 years and 11 months of age. Participants were tested through a clinical protocol, involving visual exploration of black-and-white photographs of common objects, haptic exploration of real objects, and visuo-haptic transfer of these two types of information. Results show an age-dependent development of object recognition abilities for visual, haptic, and visuo-haptic modalities. A significant effect of time on development of unimodal and crossmodal recognition skills was found. Moreover, our data suggest that multisensory processes for common object recognition are active at 4 years of age. They facilitate recognition of common objects, and, although not fully mature, are significant in adaptive behavior from the first years of age. The study of typical development of visuo-haptic processes in childhood is a starting point for future studies regarding object recognition in impaired populations.

Constructional ability in two- versus three-dimensions: relationship to spatial vision and locus of cerebrovascular lesion.

PubMed

Capruso, Daniel X; Hamsher, Kerry deS

2011-06-01

Clinical evaluation and research on constructional ability have come to rely almost exclusively on two-dimensional tasks such as graphomotor copying or mosaic Block Design (BD). A return to the inclusion of a third dimension in constructional tests may increase the spatial demands of the task, and improve understanding of the relationship between visual perception and constructional ability in patients with cerebral disease. Subjects were patients (n=43) with focal or multifocal cerebrovascular lesions as determined by CT or MRI. Tests of temporal orientation, verbal intelligence, language, object vision and spatial vision were used to determine which factors were predictive of performance on two-dimensional BD and Three-Dimensional Block Construction (3-DBC) tasks. Stepwise linear regression indicated that spatial vision predicted BD performance, and was even more strongly predictive of 3-DBC. Other cognitive domains did not account for significant additional variance in performance of either BD or 3-DBC. Bilateral cerebral lesions produced more severe deficits on BD than did unilateral cerebral lesions. The presence of a posterior cerebral lesion was the significant factor in producing deficits in 3-DBC. The spatial aspect of a constructional task is enhanced when the patient is required to assemble an object in all three dimensions of space. In the typical patient with cerebrovascular disease, constructional deficits typically occur in the context of a wider syndrome of deficits in spatial vision. Copyright © 2010 Elsevier Srl. All rights reserved.

Stability of an aqueous quadrupole micro-trap

DOE PAGES

Park, Jae Hyun; Krstić, Predrag S.

2012-03-30

Recently demonstrated functionality of an aqueous quadrupole micro- or nano-trap opens a new avenue for applications of the Paul traps, like is confinement of a charged biomolecule which requires water environment for its chemical stability. Besides strong viscosity forces, motion of a charged particle in the aqueous trap is subject to dielectrophoretic and electrophoretic forces. In this study, we describe the general conditions for stability of a charged particle in an aqueous quadrupole trap. We find that for the typical micro-trap parameters, effects of both dielectrophoresis and electrophoresis significantly influence the trap stability. In particular, the aqueous quadrupole trap couldmore » play of a role of a synthetic virtual nanopore for the 3rd generation of DNA sequencing technology.« less

Highly stretchable polymer semiconductor films through the nanoconfinement effect

NASA Astrophysics Data System (ADS)

Xu, Jie; Wang, Sihong; Wang, Ging-Ji Nathan; Zhu, Chenxin; Luo, Shaochuan; Jin, Lihua; Gu, Xiaodan; Chen, Shucheng; Feig, Vivian R.; To, John W. F.; Rondeau-Gagné, Simon; Park, Joonsuk; Schroeder, Bob C.; Lu, Chien; Oh, Jin Young; Wang, Yanming; Kim, Yun-Hi; Yan, He; Sinclair, Robert; Zhou, Dongshan; Xue, Gi; Murmann, Boris; Linder, Christian; Cai, Wei; Tok, Jeffery B.-H.; Chung, Jong Won; Bao, Zhenan

2017-01-01

Soft and conformable wearable electronics require stretchable semiconductors, but existing ones typically sacrifice charge transport mobility to achieve stretchability. We explore a concept based on the nanoconfinement of polymers to substantially improve the stretchability of polymer semiconductors, without affecting charge transport mobility. The increased polymer chain dynamics under nanoconfinement significantly reduces the modulus of the conjugated polymer and largely delays the onset of crack formation under strain. As a result, our fabricated semiconducting film can be stretched up to 100% strain without affecting mobility, retaining values comparable to that of amorphous silicon. The fully stretchable transistors exhibit high biaxial stretchability with minimal change in on current even when poked with a sharp object. We demonstrate a skinlike finger-wearable driver for a light-emitting diode.

Cardiopulmonary measurements in dogs undergoing gastropexy without gastrectomy for correction of gastric dilatation-volvulus.

PubMed

Wagner, A E; Dunlop, C I; Chapman, P L

1999-08-15

To measure cardiopulmonary variables, including cardiac index, in dogs with naturally acquired gastric dilatation-volvulus (GDV). Prospective clinical study. 6 dogs with GDV. In addition to typical medical and surgical management of GDV, the dorsal metatarsal and pulmonary arteries and right atrium of the dogs were catheterized to obtain cardiopulmonary measurements before and during anesthesia and surgery. All dogs underwent gastropexy but none required gastrectomy. Mean cardiac index and mean arterial blood pressure for this small population of dogs with GDV were not significantly different from those reported for clinically normal awake or anesthetized dogs. Dogs with naturally acquired GDV without gastric necrosis may not have the classic characteristics, including decreased cardiac index and hypotension, of hypovolemic circulatory shock.

Quantum theory of terahertz conductivity of semiconductor nanostructures

NASA Astrophysics Data System (ADS)

Ostatnický, T.; Pushkarev, V.; Němec, H.; Kužel, P.

2018-02-01

Efficient and controlled charge carrier transport through nanoelements is currently a primordial question in the research of nanoelectronic materials and structures. We develop a quantum-mechanical theory of the conductivity spectra of confined charge carriers responding to an electric field from dc regime up to optical frequencies. The broken translation symmetry induces a broadband drift-diffusion current, which is not taken into account in the analysis based on Kubo formula and relaxation time approximation. We show that this current is required to ensure that the dc conductivity of isolated nanostructures correctly attains zero. It causes a significant reshaping of the conductivity spectra up to terahertz or multiterahertz spectral ranges, where the electron scattering rate is typically comparable to or larger than the probing frequency.

Improvements to photometry. Part 1: Better estimation of derivatives in extinction and transformation equations

NASA Technical Reports Server (NTRS)

Young, Andrew T.

1988-01-01

Atmospheric extinction in wideband photometry is examined both analytically and through numerical simulations. If the derivatives that appear in the Stromgren-King theory are estimated carefully, it appears that wideband measurements can be transformed to outside the atmosphere with errors no greater than a millimagnitude. A numerical analysis approach is used to estimate derivatives of both the stellar and atmospheric extinction spectra, avoiding previous assumptions that the extinction follows a power law. However, it is essential to satify the requirements of the sampling theorem to keep aliasing errors small. Typically, this means that band separations cannot exceed half of the full width at half-peak response. Further work is needed to examine higher order effects, which may well be significant.

Discrimination and classification of acute lymphoblastic leukemia cells by Raman spectroscopy

NASA Astrophysics Data System (ADS)

Managò, Stefano; Valente, Carmen; Mirabelli, Peppino; De Luca, Anna Chiara

2015-05-01

Currently, a combination of technologies is typically required to identify and classify leukemia cells. These methods often lack the specificity and sensitivity necessary for early and accurate diagnosis. Here, we demonstrate the use of Raman spectroscopy to identify normal B cells, collected from healthy patients, and three ALL cell lines (RS4;11, REH and MN60 at different differentiation level, respectively). Raman markers associated with DNA and protein vibrational modes have been identified that exhibit excellent discriminating power for leukemia cell identification. Principal Component Analysis was finally used to confirm the significance of these markers for identify leukemia cells and classifying the data. The obtained results indicate a sorting accuracy of 96% between the three leukemia cell lines.

Lenz's Law Demonstration Using an Ultrasound Position Sensor

NASA Astrophysics Data System (ADS)

Fodor, Petru S.; Peppard, Tara

2012-09-01

One of the very popular demonstrations used in introductory physics courses to illustrate Lenz's law is the "slowly falling magnet." In its simplest version it requires only a powerful cylindrical magnet and a metal tube, typically of copper or aluminum. When dropped in the tube the magnet takes significantly longer to reach the other end than a geometrically similar but nonmagnetic object. This demonstration has been adapted for use in large classes using a camera to monitor the magnet as it approaches the end of the tube. Small versions that can be used for hands-on experiments also have been developed2 or are available commercially.3 This classical demonstration in its various forms almost never fails to impress first-time viewers.

Signing at the beginning makes ethics salient and decreases dishonest self-reports in comparison to signing at the end

PubMed Central

Shu, Lisa L.; Mazar, Nina; Gino, Francesca; Ariely, Dan; Bazerman, Max H.

2012-01-01

Many written forms required by businesses and governments rely on honest reporting. Proof of honest intent is typically provided through signature at the end of, e.g., tax returns or insurance policy forms. Still, people sometimes cheat to advance their financial self-interests—at great costs to society. We test an easy-to-implement method to discourage dishonesty: signing at the beginning rather than at the end of a self-report, thereby reversing the order of the current practice. Using laboratory and field experiments, we find that signing before—rather than after—the opportunity to cheat makes ethics salient when they are needed most and significantly reduces dishonesty. PMID:22927408

Visual discrimination of local surface structure: slant, tilt, and curvedness.

PubMed

Norman, J Farley; Todd, James T; Norman, Hideko F; Clayton, Anna Marie; McBride, T Ryan

2006-03-01

In four experiments, observers were required to discriminate interval or ordinal differences in slant, tilt, or curvedness between designated probe points on randomly shaped curved surfaces defined by shading, texture, and binocular disparity. The results reveal that discrimination thresholds for judgments of slant or tilt typically range between 4 degrees and 10 degrees; that judgments of one component are unaffected by simultaneous variations in the other; and that the individual thresholds for either the slant or tilt components of orientation are approximately equal to those obtained for judgments of the total orientation difference between two probed regions. Performance was much worse, however, for judgments of curvedness, and these judgments were significantly impaired when there were simultaneous variations in the shape index parameter of curvature.

On the role of nanopore formation and evolution in multi-pulse laser nanostructuring of glasses

NASA Astrophysics Data System (ADS)

Rudenko, Anton; Ma, Hongfeng; Veiko, Vadim P.; Colombier, Jean-Philippe; Itina, Tatiana E.

2018-01-01

Laser nanostructuring of glasses has attracted particular attention during laser decades due to its numerous applications in optics, telecommunications, sensing, nanofluidics, as well as in the development of nanocomposite materials. Despite a significant progress achieved in this field with the development and use of femtosecond laser systems, many questions remain puzzling. This study is focused on the numerical modeling of ultrashort laser interactions with glasses. Firstly, we consider laser light propagation and nonlinear ionization. Then, nanocavitation processes in glasses are modeled, followed by the hydrodynamic evolution of pores and cavities. The required conditions for nanopore formation and volume nanogratings erasure in the typical femtosecond laser-irradiation regimes are discussed in the frame of the developed model.

Progress in the utilization of an oxide-dispersion-strengthened alloy for small engine turbine blades

NASA Technical Reports Server (NTRS)

Beatty, T. G.; Millan, P. P.

1984-01-01

The conventional means of improving gas turbine engine performance typically involves increasing the turbine inlet temperature; however, at these higher operational temperatures the high pressure turbine blades require air-cooling to maintain durability. Air-cooling imposes design, material, and economic constraints not only on the turbine blades but also on engine performance. The use of uncooled turbine blades at increased operating temperatures can offer significantly improved performance in small gas turbine engines. A program to demonstrate uncooled MA6000 high pressure turbine blades in a GTEC TFE731 turbofan engine is being conducted. The project goals include demonstration of the advantages of using uncooled MA6000 turbine blades as compared with cast directionally solidified MAR-M 247 blades.

Jet fuels from synthetic crudes

NASA Technical Reports Server (NTRS)

Antoine, A. C.; Gallagher, J. P.

1977-01-01

An investigation was conducted to determine the technical problems in the conversion of a significant portion of a barrel of either a shale oil or a coal synthetic crude oil into a suitable aviation turbine fuel. Three syncrudes were used, one from shale and two from coal, chosen as representative of typical crudes from future commercial production. The material was used to produce jet fuels of varying specifications by distillation, hydrotreating, and hydrocracking. Attention is given to process requirements, hydrotreating process conditions, the methods used to analyze the final products, the conditions for shale oil processing, and the coal liquid processing conditions. The results of the investigation show that jet fuels of defined specifications can be made from oil shale and coal syncrudes using readily available commercial processes.

High Efficiency InP Solar Cells from Low Toxicity Tertiarybutylphosphine

NASA Technical Reports Server (NTRS)

Hoffman, Richard W., Jr.; Fatemi, Navid S.; Wilt, David M.; Jenkins, Phillip P.; Brinker, David J.; Scheiman, David A.

1994-01-01

Large scale manufacture of phosphide based semiconductor devices by organo-metallic vapor phase epitaxy (OMVPE) typically requires the use of highly toxic phosphine. Advancements in phosphine substitutes have identified tertiarybutylphosphine (TBP) as an excellent precursor for OMVPE of InP. High quality undoped and doped InP films were grown using TBP and trimethylindium. Impurity doped InP films were achieved utilizing diethylzinc and silane for p and n type respectively. 16 percent efficient solar cells under air mass zero, one sun intensity were demonstrated with Voc of 871 mV and fill factor of 82.6 percent. It was shown that TBP could replace phosphine, without adversely affecting device quality, in OMVPE deposition of InP thus significantly reducing toxic gas exposure risk.

Power requirements for cosmic ray propagation models involving diffusive reacceleration; estimates and implications for the damping of interstellar turbulence

NASA Astrophysics Data System (ADS)

Drury, Luke O.'C.; Strong, Andrew W.

2017-01-01

We make quantitative estimates of the power supplied to the Galactic cosmic ray population by second-order Fermi acceleration in the interstellar medium, or as it is usually termed in cosmic ray propagation studies, diffusive reacceleration. Using recent results on the local interstellar spectrum, following Voyager 1's crossing of the heliopause, we show that for parameter values, in particular the Alfvén speed, typically used in propagation codes such as GALPROP to fit the B/C ratio, the power contributed by diffusive reacceleration is significant and can be of order 50% of the total Galactic cosmic ray power. The implications for the damping of interstellar turbulence are briefly considered.

Optical Excitation of Carbon Nanotubes Drives Localized Diazonium Reactions

PubMed Central

2016-01-01

Covalent chemistries have been widely used to modify carbon nanomaterials; however, they typically lack the precision and efficiency required to directly engineer their optical and electronic properties. Here, we show, for the first time, that visible light which is tuned into resonance with carbon nanotubes can be used to drive their functionalization by aryldiazonium salts. The optical excitation accelerates the reaction rate 154-fold (±13) and makes it possible to significantly improve the efficiency of covalent bonding to the sp2 carbon lattice. Control experiments suggest that the reaction is dominated by a localized photothermal effect. This light-driven reaction paves the way for precise nanochemistry that can directly tailor carbon nanomaterials at the optical and electronic levels. PMID:27588432

Bipolar Latissimus Dorsi Transfer for Restoration of Pectoralis Major Function in Poland Syndrome.

PubMed

Buchanan, Patrick; Leyngold, Mark; Mast, Bruce A

2016-01-01

Poland syndrome typically presents as a unilateral congenital complete or partial absence of the pectoralis major muscle, variably with other associated anomalies. Reconstruction of the defect typically concentrates on aesthetic restoration with functional outcomes being unsuccessful or limited. We present an innovative means of true muscle transfer that provided functional benefit to increase upper extremity strength. A 16-year-old adolescent boy with Poland syndrome manifesting as left pectoralis major muscle agenesis wished to undergo functional reconstruction. He wanted to play on his high school football team, but could not meet the minimum weightlifting requirements. An ipsilateral latissimus dorsi muscle bipolar functional transfer was done with bone-anchored inset into the sternum and humerus so that muscle flexion would replace the absent pectoralis major. A progressive weight training program was then instituted postoperatively. At 9 months, a significant increase in left upper extremity strength was confirmed. The patient ultimately was able to surpass the weightlifting requirements for his high school football team, and joined the team. Our highlighted procedure restored functional outcome using both plastic surgical principles and orthopedic techniques for muscle and tendon repair: bipolar muscle transfer and load-bearing muscle inset. Heretofore, transfer of the latissimus for provision of pectoralis major function has not been reported. Functional reconstruction was possible due to stable, bipolar muscle transfer with load-bearing muscle attachments into cortical bone of the anterior sternum and anteromedial aspect of the humerus. The techniques described should be within the skill set of most plastic surgeons, so that functional restoration for those with Poland syndrome is possible and accessible.

Control designs for low-loss active magnetic bearings: Theory and implementation

NASA Astrophysics Data System (ADS)

Wilson, Brian Christopher David

Active Magnetic Bearings (AMB) have been proposed for use in Electromechanical Flywheel Batteries. In these devices, kinetic energy is stored in a magnetically levitated flywheel which spins in a vacuum. The AMB eliminates all mechanical losses, however, electrical loss, which is proportional to the square of the magnetic flux, is still significant. For efficient operation, the flux bias, which is typically introduced into the electromagnets to improve the AMB stiffness, must be reduced, preferably to zero. This zero-bias (ZB) mode of operation cripples the classical control techniques which are customarily used and nonlinear control is required. As a compromise between AMB stiffness and efficiency, a new flux bias scheme is proposed called the generalized complementary flux condition (gcfc). A flux-bias dependent trade-off exists between AMB stiffness, power consumption, and power loss. This work theoretically develops and experimentally verifies new low-loss AMB control designs which employ the gcfc condition. Particular attention is paid to the removal of the singularity present in the standard nonlinear control techniques when operating in ZB. Experimental verification is conduced on a 6-DOF AMB reaction wheel. Practical aspects of the gcfc implementation such as flux measurement and flux-bias implementation with voltage mode amplifiers using IR compensation are investigated. Comparisons are made between the gcfc bias technique and the standard constant-flux-sum (cfs) bias method. Under typical operating circumstances, theoretical analysis and experimental data show that the new gcfc bias scheme is more efficient in producing the control flux required for rotor stabilization than the ordinary cfs bias strategy.

High bandwidth specialty optical fibers for data communications

NASA Astrophysics Data System (ADS)

Li, Jie; Sun, Xiaoguang

2008-11-01

Perhaps the most common specialty optical fiber is HCS hard polymer clad silica fiber. It was invented almost 30 years ago for transmitting laser light to initiate explosives in mining industry and later adapted to be used in a variety of new applications, such as data communications. The most typical HCS fiber typically consists of a 200 μm pure silica glass core, a thin coating of low refractive index hard polymer as the cladding, and an ETFE buffer. This design enables the "crimp-and-cleave" technique of terminating and connectorizing fibers quickly and reliably. Its greater glass diameter also renders greater robustness allowing the fiber to endure greater forces during installation. Due to its larger core size and high numerical aperture (NA), the fiber can be used with a plastic connector and low cost LED transmitter that can greatly reduce the system cost. It can also be used at higher temperature and humidity conditions than standard optical fibers coated with telecommunications grade acrylate material. As applications evolve and require greater bandwidth and/or performance over a greater distance, the challenge now is to develop specialty optical fibers with significantly greater bandwidth-length product while maintaining all other characteristics critical to their ease of use and performance. As a response to the demand, two new fiber types have been designed and developed as higher bandwidth versions of the original HCS fiber. In this paper, we will discuss some of the main design requirements for the fibers, describe in detail the two designs, and present the results of fiber performance.

An Entry Flight Controls Analysis for a Reusable Launch Vehicle

NASA Technical Reports Server (NTRS)

Calhoun, Philip

2000-01-01

The NASA Langley Research Center has been performing studies to address the feasibility of various single-stage to orbit concepts for use by NASA and the commercial launch industry to provide a lower cost access to space. Some work on the conceptual design of a typical lifting body concept vehicle, designated VentureStar(sup TM) has been conducted in cooperation with the Lockheed Martin Skunk Works. This paper will address the results of a preliminary flight controls assessment of this vehicle concept during the atmospheric entry phase of flight. The work includes control analysis from hypersonic flight at the atmospheric entry through supersonic speeds to final approach and landing at subsonic conditions. The requirements of the flight control effectors are determined over the full range of entry vehicle Mach number conditions. The analysis was performed for a typical maximum crossrange entry trajectory utilizing angle of attack to limit entry heating and providing for energy management, and bank angle to modulation of the lift vector to provide downrange and crossrange capability to fly the vehicle to a specified landing site. Sensitivity of the vehicle open and closed loop characteristics to CG location, control surface mixing strategy and wind gusts are included in the results. An alternative control surface mixing strategy utilizing a reverse aileron technique demonstrated a significant reduction in RCS torque and fuel required to perform bank maneuvers during entry. The results of the control analysis revealed challenges for an early vehicle configuration in the areas of hypersonic pitch trim and subsonic longitudinal controllability.

Design and Testing of a Thermal Storage System for Electric Vehicle Cabin Heating

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Mingyu; WolfeIV, Edward; Craig, Timothy

Without the waste heat available from the engine of a conventional automobile, electric vehicles (EVs) must provide heat to the cabin for climate control using energy stored in the vehicle. In current EV designs, this energy is typically provided by the traction battery. In very cold climatic conditions, the power required to heat the EV cabin can be of a similar magnitude to that required for propulsion of the vehicle. As a result, the driving range of an EV can be reduced very significantly during winter months, which limits consumer acceptance of EVs and results in increased battery costs tomore » achieve a minimum range while ensuring comfort to the EV driver. To minimize the range penalty associated with EV cabin heating, a novel climate control system that includes thermal energy storage has been designed for use in EVs and plug-in hybrid electric vehicles (PHEVs). The system uses the stored latent heat of an advanced phase change material (PCM) to provide cabin heating. The PCM is melted while the EV is connected to the electric grid for charging of the electric battery, and the stored energy is subsequently transferred to the cabin during driving. To minimize thermal losses when the EV is parked for extended periods, the PCM is encased in a high performance insulation system. The electrical PCM-Assisted Thermal Heating System (ePATHS) was designed to provide enough thermal energy to heat the EV s cabin for approximately 46 minutes, covering the entire daily commute of a typical driver in the U.S.« less

Test Operations Procedure (TOP) 6-3-044. Optical Transfer Function

DTIC Science & Technology

2009-07-27

Mounting Fixtures As required Alignment Periscope See section 4.1.6 TOP 6-3-040 27 July 2009 3 3. REQUIRED TEST CONDITIONS. 3.1 Pre-test...carefully selected. The stabilized cast iron lathe bed type, typically 2-3 m long, provides adequate support for mounting the various assemblies...combined size and weight of some vehicle mounted sights, a special mounting fixture , perhaps including a periscopic system may be required. It is

Red or uncomfortable eye.

PubMed Central

Davey, C.; Hurwitz, B.

1992-01-01

1. A red, uncomfortable eye may be accompanied by other symptoms such as blurred, decreased, or double vision, haloes, photophobia, pain or discharge. 2. A careful history and brief systematic examination will sort out most problems. 3. Examine eyelids, the conjunctivae and corneas. Checking visual acuity is often important. 4. The most common underlying causes can usually be managed within general practice, though a few patients will require urgent eye assessment, or routine referral to ophthalmic outpatients. 5. The following are typical eye problems which require urgent referral: History of pain as opposed to discomfort, Trauma including foreign bodies, chemicals and suspected penetrating injury, Unexplained drop in visual acuity of two lines or more in a painful eye. Specific conditions: preseptal cellulitis, herpes simplex ulcer, scleritis, orbital cellulitis, herpes zoster, bacterial corneal ulcer, dacryocystitis. 6. The following are typical problems which may require routine referral: Persistence of the problem not relieved by simple measures, Recurrent disorders of uncertain diagnosis, Eyelid swelling such as chalazion, cysts, basal cell carcinoma, Gradual loss of vision, for example cataract, macular degeneration. PMID:1345157

Tool Forces Developed During Friction Stir Welding

NASA Technical Reports Server (NTRS)

Melendez, M.; Tang, W.; Schmidt, C.; McClure, J. C.; Nunes, A. C.; Murr, L. E.

2003-01-01

This paper will describe a technique for measuring the various forces and the torque that exist on the Friction Stir Welding pin tool. Results for various plunge depths, weld speeds, rotational speed, and tool configurations will be presented. Welds made on 6061 aluminum with typical welding conditions require a downward force of 2800 lbs. (12.5 kN) a longitudinal force in the direction of motion of 300 lbs (1.33 kN), a transverse force in the omega x v direction of 30 lbs (135 N). Aluminum 2195 under typical weld conditions requires a downward force of 3100 lbs. (1.38 kN), a longitudinal force of 920 lbs. (4.1 kN), and a transverse force of 45 lbs. (200 N) in the omega x v direction.

Spin-tunnel investigation of the spinning characteristics of typical single-engine general aviation airplane designs. 2: Low-wing model A; tail parachute diameter and canopy distance for emergency spin recovery

NASA Technical Reports Server (NTRS)

Burk, S. M., Jr.; Bowman, J. S., Jr.; White, W. L.

1977-01-01

A spin tunnel study is reported on a scale model of a research airplane typical of low-wing, single-engine, light general aviation airplanes to determine the tail parachute diameter and canopy distance (riser length plus suspension-line length) required for energency spin recovery. Nine tail configurations were tested, resulting in a wide range of developed spin conditions, including steep spins and flat spins. The results indicate that the full-scale parachute diameter required for satisfactory recovery from the most critical conditions investigated is about 3.2 m and that the canopy distance, which was found to be critical for flat spins, should be between 4.6 and 6.1 m.

The Evaluation of Reflective Learning Practice: Preparing College Students for Globalization

ERIC Educational Resources Information Center

Richard, Cathleen Becnel

2010-01-01

A problem facing education today is that learning typically requires rote memorization rather than the use of higher-order thinking skills. Higher-order thinking is needed in a global society to solve real world problems, therefore students should be required to develop and practice higher-order thinking skills. The purpose of this mixed method…

Predicting Calcite (CaCO3) Requirements of Sphagnum Peat Moss from pH Titration Curves

USDA-ARS?s Scientific Manuscript database

Liming materials are required to neutralize acidity in peat moss to make it a suitable substrate for growing container crops. A series of time-consuming incubations of peat:lime mixtures are typically used to determine the liming rate to achieve a desired pH. Our objective was to evaluate the util...

76 FR 56217 - Information Collection Sent to the Office of Management and Budget (OMB) for Approval; Grand...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-12

...: Required to obtain or retain a benefit. Frequency of Collection: On occasion. Estimated Number of Annual... Form is required when the applicant has requested a solo hike, an itinerary considered overly ambitious for the typical hiker, or a summer hike outside the Corridor Zone. The form asks for information that...

Extending E-Book with Contextual Knowledge Recommender for Reading Support on a Web-Based Learning System

ERIC Educational Resources Information Center

Chen, Gwo-Dong; Wei, Fu-Hsiang; Wang, Chin-Yeh; Lee, Jih-Hsien

2007-01-01

Reading content of the Web is increasingly popular. When students read the same material, each student has a unique comprehension of the text and requires individual support from appropriate references. Most references in typical web learning systems are unorganized. Students are often required to disrupt their reading to locate references. This…

Psychiatric and Medical Conditions in Transition-Aged Individuals With ASD.

PubMed

Davignon, Meghan N; Qian, Yinge; Massolo, Maria; Croen, Lisa A

2018-04-01

Children with autism spectrum disorder (ASD) have a variety of medical and psychiatric conditions and an increased use of health care services. There is limited information about the prevalence of psychiatric and medical conditions in adolescents and young adults with ASD. Our objective was to describe the frequency of medical and psychiatric conditions in a large population of diverse, insured transition-aged individuals with ASD. Participants included Kaiser Permanente Northern California members who were enrolled from 2013 to 2015 and who were 14 to 25 years old. Individuals with ASD ( n = 4123) were compared with peers with attention-deficit/hyperactivity disorder ( n = 20 615), diabetes mellitus ( n = 2156), and typical controls with neither condition ( n = 20 615). Over one-third (34%) of individuals with ASD had a co-occurring psychiatric condition; the most commonly reported medical conditions included infections (42%), obesity (25%), neurologic conditions (18%), allergy and/or immunologic conditions (16%), musculoskeletal conditions (15%), and gastrointestinal (11%) conditions. After controlling for sex, age, race, and duration of Kaiser Permanente Northern California membership, most psychiatric conditions were significantly more common in the ASD group than in each comparison group, and most medical conditions were significantly more common in the ASD group than in the attention-deficit/hyperactivity disorder and typical control groups but were similar to or significantly less common than the diabetes mellitus group. Although more research is needed to identify factors contributing to this excess burden of disease, there is a pressing need for all clinicians to approach ASD as a chronic health condition requiring regular follow-up and routine screening and treatment of medical and psychiatric issues. Copyright © 2018 by the American Academy of Pediatrics.

Multiple scattering in the remote sensing of natural surfaces

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Wen-Hao; Weeks, R.; Gillespie, A.R.

1996-07-01

Radiosity models predict the amount of light scattered many times (multiple scattering) among scene elements in addition to light interacting with a surface only once (direct reflectance). Such models are little used in remote sensing studies because they require accurate digital terrain models and, typically, large amounts of computer time. We have developed a practical radiosity model that runs relatively quickly within suitable accuracy limits, and have used it to explore problems caused by multiple-scattering in image calibration, terrain correction, and surface roughness estimation for optical images. We applied the radiosity model to real topographic surfaces sampled at two verymore » different spatial scales: 30 m (rugged mountains) and 1 cm (cobbles and gravel on an alluvial fan). The magnitude of the multiple-scattering (MS) effect varies with solar illumination geometry, surface reflectivity, sky illumination and surface roughness. At the coarse scale, for typical illumination geometries, as much as 20% of the image can be significantly affected (>5%) by MS, which can account for as much as {approximately}10% of the radiance from sunlit slopes, and much more for shadowed slopes, otherwise illuminated only by skylight. At the fine scale, radiance from as much as 30-40% of the scene can have a significant MS component, and the MS contribution is locally as high as {approximately}70%, although integrating to the meter scale reduces this limit to {approximately}10%. Because the amount of MS increases with reflectivity as well as roughness, MS effects will distort the shape of reflectance spectra as well as changing their overall amplitude. The change is proportional to surface roughness. Our results have significant implications for determining reflectivity and surface roughness in remote sensing.« less

Knee Joint Kinetics in Relation to Commonly Prescribed Squat Loads and Depths

PubMed Central

Cotter, Joshua A.; Chaudhari, Ait M.; Jamison, Steve T.; Devor, Steven T.

2014-01-01

Controversy exists regarding the safety and performance benefits of performing the squat exercise to depths beyond 90° of knee flexion. Our aim was to compare the net peak external knee flexion moments (pEKFM) experienced over typical ranges of squat loads and depths. Sixteen recreationally trained males (n = 16; 22.7 ± 1.1 yrs; 85.4 ± 2.1 kg; 177.6 ± 0.96 cm; mean ± SEM) with no previous lower limb surgeries or other orthopedic issues and at least one year of consistent resistance training experience while utilizing the squat exercise performed single repetition squat trials in a random order at squat depths of above parallel, parallel, and below parallel. Less than one week before testing, one repetition maximum (1RM) values were found for each squat depth. Subsequent testing required subjects to perform squats at the three depths with three different loads: unloaded, 50% 1RM, and 85% 1RM (nine total trials). Force platform and kinematic data were collected to calculate pEKFM. To assess differences among loads and depths, a two-factor (load and depth) repeated-measures ANOVA with significance set at the P < 0.05 level was used. Squat 1RM significantly decreased 13.6% from the above parallel to parallel squat and another 3.6% from the parallel to the below parallel squat (P < 0.05). Net peak external knee flexion moments significantly increased as both squat depth and load were increased (P ≤ 0.02). Slopes of pEKFM were greater from unloaded to 50% 1RM than when progressing from 50% to 85% 1RM (P < 0.001). The results suggest that that typical decreases in squat loads used with increasing depths are not enough to offset increases in pEKFM. PMID:23085977

3D sensing for machine guidance in meat cutting applications

NASA Astrophysics Data System (ADS)

Daley, Wayne; Britton, Doug; Usher, Colin; Diao, Mamadou; Ruffin, Kevin

2005-11-01

Most cutting and deboning operations in meat processing require accurate cuts be made to obtain maximum yield and ensure food safety. This is a significant concern for purveyors of deboned product. This task is made more difficult by the variability that is present in most natural products. The specific application of interest in this paper is the production of deboned poultry breast. This is typically obtained from a cut of the broiler called a 'front half' that includes the breast and the wings. The deboning operation typically consists of a cut that starts at the shoulder joint and then continues along the scapula. Attentive humans with training do a very good job of making this cut. The breast meat is then removed by pulling on the wings. Inaccurate cuts lead to poor yield (amount of boneless meat obtained relative to the weight of the whole carcass) and increase the probability that bone fragments might end up in the product. As equipment designers seek to automate the deboning operation, the cutting task has been a significant obstacle to developing automation that maximizes yield without generating unacceptable levels of bone fragments. The current solution is to sort the bone-in product into different weight ranges and then to adjust the deboning machines to the average of these weight ranges. We propose an approach for obtaining key cut points by extrapolation from external reference points based on the anatomy of the bird. We show that this approach can be implemented using a stereo imaging system, and the accuracy in locating the cut points of interest is significantly improved. This should result in more accurate cuts and with this concomitantly improved yield while reducing the incidence of bones. We also believe the approach could be extended to the processing of other species.

Effects of liquid chromatography mobile phases and buffer salts on phosphorus inductively coupled plasma atomic emission and mass spectrometries utilizing ultrasonic nebulization and membrane desolvation.

PubMed

Carr, John E; Kwok, Kaho; Webster, Gregory K; Carnahan, Jon W

2006-01-23

Atomic spectrometry, specifically inductively coupled plasma atomic emission spectrometry (ICP-AES) and mass spectrometry (ICP-MS) show promise for heteroatom-based detection of pharmaceutical compounds. The combination of ultrasonic nebulization (USN) with membrane desolvation (MD) greatly enhances detection limits with these approaches. Because pharmaceutical analyses often incorporate liquid chromatography, the study herein was performed to examine the effects of solvent composition on the analytical behaviors of these approaches. The target analyte was phosphorus, introduced as phosphomycin. AES response was examined at the 253.7 nm atom line and mass 31 ions were monitored for the MS experiments. With pure aqueous solutions, detection limits of 5 ppb (0.5 ng in 0.1 mL injection volumes) were obtained with ICP-MS. The ICP-AES detection limit was 150 ppb. Solvent compositions were varied from 0 to 80% organic (acetonitrile and methanol) with nine buffers at concentrations typically used in liquid chromatography. In general, solvents and buffers had statistically significant, albeit small, effects on ICP-AES sensitivities. A few exceptions occurred in cases where typical liquid chromatography buffer concentrations produced higher mass loadings on the plasma. Indications are that isocratic separations can be reliably performed. Within reasonable accuracy tolerances, it appears that gradient chromatography can be performed without the need for signal response normalization. Organic solvent and buffer effects were more significant with ICP-MS. Sensitivities varied significantly with different buffers and organic solvent content. In these cases, gradient chromatography will require careful analytical calibration as solvent and buffer content is varied. However, for most buffer and solvent combinations, signal and detection limits are only moderately affected. Isocratic separations and detection are feasible.

Intervention Provided to Linguistically Diverse Middle School Students with Severe Reading Difficulties

PubMed Central

Denton, Carolyn A.; Wexler, Jade; Vaughn, Sharon; Bryan, Deanna

2012-01-01

This study investigated the effectiveness of a multicomponent reading intervention implemented with middle school students with severe reading difficulties, all of whom had received remedial and/or special education for several years with minimal response to intervention. Participants were 38 students in grades 6–8 who had severe deficits in word reading, reading fluency, and reading comprehension. Most were Spanish-speaking English language learners (ELLs) with identified disabilities. Nearly all demonstrated severely limited oral vocabularies in English and, for ELLs, in both English and Spanish. Students were randomly assigned to receive the research intervention (n = 20) or typical instruction provided in their school’s remedial reading or special education classes (n = 18). Students in the treatment group received daily explicit and systematic small-group intervention for 40 minutes over 13 weeks, consisting of a modified version of a phonics-based remedial program augmented with English as a Second Language practices and instruction in vocabulary, fluency, and comprehension strategies. Results indicated that treatment students did not demonstrate significantly higher outcomes in word recognition, comprehension, or fluency than students who received the school’s typical instruction and that neither group demonstrated significant growth over the course of the study. Significant correlations were found between scores on teachers’ ratings of students’ social skills and problem behaviors and posttest decoding and spelling scores, and between English oral vocabulary scores and scores in word identification and comprehension. The researchers hypothesize that middle school students with the most severe reading difficulties, particularly those who are ELLs and those with limited oral vocabularies, may require intervention of considerably greater intensity than that provided in this study. Further research directly addressing features of effective remediation for these students is needed. PMID:22736893

Early versus late erythropoietin for preventing red blood cell transfusion in preterm and/or low birth weight infants.

PubMed

Aher, Sanjay M; Ohlsson, Arne

2012-10-17

Low plasma levels of erythropoietin (EPO) in preterm infants provide a rationale for the use of EPO to prevent or treat anaemia. To assess the effectiveness and safety of early versus late initiation of EPO in reducing red blood cell (RBC) transfusions in preterm and/or low birth weight (LBW) infants. The standard search of the Cochrane Neonatal Review Group (CNRG) was performed in 2006 and updated in 2009. Updated search in September 2009 as follows: The Cochrane Library, MEDLINE (search via PubMed), CINAHL and EMBASE were searched from 2005 to September 2009. The searches were repeated in March 2012. The Pediatric Academic Societies' Annual meetings were searched electronically from 2000 to 2012 at Abstracts2View(TM) as were clinical trials registries (clinicaltrials.gov; controlled-trials.com; and who.int/ictrp). Randomised or quasi-randomised controlled trials enrolling preterm or LBW infants less than eight days of age. Early initiation of EPO (initiated at less than eight days of age) versus late initiation of EPO (initiated at eight to 28 days of age). The standard methods of the CNRG were followed. Weighted treatment effects included typical risk ratio (RR), typical risk difference (RD), number needed to treat to benefit (NNTB), number needed to treat to harm (NNTH) and mean difference (MD), all with 95% confidence intervals (CI). A fixed-effect model was used for meta-analyses and heterogeneity was evaluated using the I-squared (I(2)) test. No new trials were identified in March of 2012. Two high quality randomised double-blind controlled studies enrolling 262 infants were identified. A non-significant reduction in the 'Use of one or more RBC transfusions' [two studies 262 infants; typical RR 0.91 (95% CI 0.78 to 1.06); typical RD -0.07 (95% CI -0.18 to 0.04; I(2) = 0% for both RR and RD] favouring early EPO was noted. Early EPO administration resulted in a non-significant reduction in the "number of transfusions per infant" compared with late EPO [typical MD - 0.32 (95% CI -0.92 to 0.29)]. There was no significant reduction in total volume of blood transfused per infant or in the number of donors to whom the infant was exposed. Early EPO led to a significant increase in the risk of retinopathy of prematurity (ROP) (all stages) [two studies, 191 infants; typical RR 1.40 (95% CI 1.05 to 1.86); typical RD 0.16 (95% CI 0.03 to 0.29); NNTH 6 (95% CI 3 to 33)]. There was high heterogeneity for this outcome (I(2) = 86% for RR and 81% for RD). Both studies (191 infants) reported on ROP stage ≥ 3. No statistically significant increase in risk was noted [typical RR 1.56 (95% CI 0.71 to 3.41); typical RD 0.05 (-0.04 to 0.14)] There was no heterogeneity for this outcome (0% for both RR and RD). No other important favourable or adverse neonatal outcomes or side effects were reported. The use of early EPO did not significantly reduce the 'Use of one or more RBC transfusions' or the 'Number of transfusions per infant" compared with late EPO administration. The finding of a statistically significant increased risk of ROP (any grade) and a similar trend for ROP stage ≥ 3 with early EPO treatment is of great concern.

Experimental examination of the Mg-silicate-carbonate system at ambient temperature: Implications for alkaline chemical sedimentation and lacustrine carbonate formation

NASA Astrophysics Data System (ADS)

Tutolo, Benjamin M.; Tosca, Nicholas J.

2018-03-01

Despite their clear economic significance, Cretaceous presalt carbonates of the South Atlantic continental margins are not well-described by published facies models. This knowledge gap arises, in part, because the chemical processes that generate distinctive sedimentary products in alkaline, non-marine environments are poorly understood. Here, we use constraints inferred from reported mineralogical and geochemical features of presalt carbonate rocks to design and perform a suite of laboratory experiments to quantify the processes of alkaline chemical sedimentation. Using real-time observations of in-situ fluid chemistry, post-experiment analysis of precipitated solids, and geochemical modeling tools, we illustrate that spherulitic carbonates and Mg-silicate clays observed in presalt carbonates were likely precipitated from elevated pH (∼10-10.5) waters with high concentrations of silica and alkali cations typical of intermediate to felsic rocks, such as Na+ and K+. Charge balance constraints require that these cations were not counterbalanced to any significant degree by anions typical of seawater, such as Cl- and SO4-, which implies minimal seawater involvement in presalt deposition. Experimental data suggest that, at this alkaline pH, only modest concentrations (i.e., ∼0.5-1 mmol/kg) of Ca++ would have been required to precipitate spheroidal CaCO3. Given the rapid rates of CaCO3 nucleation and growth under such conditions, it is unlikely that Ca++ concentrations in lake waters ever exceeded these values, and sustained chemical fluxes are therefore required for extensive sediment accumulation. Moreover, our experiments indicate that the original mineralogy of presalt CaCO3 could have been calcite or aragonite, but the differing time scales of precipitation between CaCO3 and Mg-silicates would have tended to skew the Mg/Ca ratio in solution towards elevated values which favor aragonite. Mg-silicate nucleation and growth rates measured during our experiments suggest that elevated SiO2(aq) and high pH would have limited (to 1-2 mmol/kg) the Mg++ concentrations required to precipitate poorly crystalline Mg-silicates, which, through time, crystallize to minerals such as sepiolite and stevensite. Although our results provide robust constraints on the geochemistry of Mg-silicate-carbonate interactions during alkaline lake sedimentation, they leave open the potential for biological contributions to sedimentation within the presalt basins, as well as the hydrogeochemical mechanisms that maintained a productive carbonate factory of the scale observed along the South Atlantic margins.

A variable passive low-frequency absorber

NASA Astrophysics Data System (ADS)

Larsen, Niels Werner; Thompson, Eric R.; Gade, Anders Christian

2005-04-01

Multi-purpose concert halls face a dilemma. They can host classical music concerts, rock concerts and spoken word performances in a matter of a short period. These different performance types require significantly different acoustic conditions in order to provide the best sound quality to both the performers and the audience. A recommended reverberation time for classical music may be in the range of 1.5-2 s for empty halls, where rock music sounds best with a reverberation time around 0.8-1 s. Modern rhythmic music often contains high levels of sound energy in the low frequency bands but still requires a high definition for good sound quality. Ideally, the absorption of the hall should be adjustable in all frequency bands in order to provide good sound quality for all types of performances. The mid and high frequency absorption is easily regulated, but adjusting the low-frequency absorption has typically been too expensive or requires too much space to be practical for multi-purpose halls. Measurements were made on a variable low-frequency absorber to develop a practical solution to the dilemma. The paper will present the results of the measurements as well as a possible design.

An Optimized Multicolor Point-Implicit Solver for Unstructured Grid Applications on Graphics Processing Units

NASA Technical Reports Server (NTRS)

Zubair, Mohammad; Nielsen, Eric; Luitjens, Justin; Hammond, Dana

2016-01-01

In the field of computational fluid dynamics, the Navier-Stokes equations are often solved using an unstructuredgrid approach to accommodate geometric complexity. Implicit solution methodologies for such spatial discretizations generally require frequent solution of large tightly-coupled systems of block-sparse linear equations. The multicolor point-implicit solver used in the current work typically requires a significant fraction of the overall application run time. In this work, an efficient implementation of the solver for graphics processing units is proposed. Several factors present unique challenges to achieving an efficient implementation in this environment. These include the variable amount of parallelism available in different kernel calls, indirect memory access patterns, low arithmetic intensity, and the requirement to support variable block sizes. In this work, the solver is reformulated to use standard sparse and dense Basic Linear Algebra Subprograms (BLAS) functions. However, numerical experiments show that the performance of the BLAS functions available in existing CUDA libraries is suboptimal for matrices representative of those encountered in actual simulations. Instead, optimized versions of these functions are developed. Depending on block size, the new implementations show performance gains of up to 7x over the existing CUDA library functions.

Composite Overwrapped Pressure Vessels, A Primer

NASA Technical Reports Server (NTRS)

McLaughlan, Pat B.; Forth, Scott C.; Grimes-Ledesma, Lorie R.

2011-01-01

Due to the extensive amount of detailed information that has been published on composite overwrapped pressure vessels (COPVs), this document has been written to serve as a primer for those who desire an elementary knowledge of COPVs and the factors affecting composite safety. In this application, the word "composite" simply refers to a matrix of continuous fibers contained within a resin and wrapped over a pressure barrier to form a vessel for gas or liquid containment. COPVs are currently used at NASA to contain high pressure fluids in propulsion, science experiments, and life support applications. They have a significant weight advantage over all metal vessels but require unique design, manufacturing, and test requirements. COPVs also involve a much more complex mechanical understanding due to the interplay between the composite overwrap and the inner liner. A metallic liner is typically used in a COPV as a fluid permeation barrier. The liner design concepts and requirements have been borrowed from all-metal vessels. However, application of metallic vessel design standards to a very thin liner is not straightforward. Different failure modes exist for COPVs than for all-metal vessels, and understanding of these failure modes is at a much more rudimentary level than for metal vessels.

The Electromagnetic Compatibility (EMC) Design Challenge for Scientific Spacecraft Powered by a Stirling Power Converter

NASA Technical Reports Server (NTRS)

Sargent, Noel B.

2001-01-01

A 55 We free-piston Stirling Technology Demonstration Convertor (TDC) has been tested as part of an evaluation to determine its feasibility as a means for significantly reducing the amount of radioactive material required compared to Radioisotope Thermoelectric Generators (RTGs) to support long-term space science missions. Measurements were made to quantify the low frequency magnetic and electric fields radiated from the Stirling's 80 Hertz (Hz) linear alternator and control electronics in order to determine the magnitude of reduction that will be required to protect sensitive field sensors aboard some science missions. One identified "Solar Probe" mission requires a 100 dB reduction in the low frequency magnetic field over typical military standard design limits, to protect its plasma wave sensor. This paper discusses the electromagnetic interference (EMI) control options relative to the physical design impacts for this power system, composed of 3 basic electrical elements. They are (1) the Stirling Power Convertor with its linear alternator, (2) the power switching and control electronics to convert the 90 V, 80 Hz alternator output to DC for the use of the spacecraft, and (3) the interconnecting wiring including any instrumentation to monitor and control items 1 and 2.

A Novel Method for Quick Assessment of Internal And External Radiation Exposure in the Aftermath of a Large Radiological Incident.

PubMed

Korir, Geoffrey; Karam, P Andrew

2018-06-11

In the event of a significant radiological release in a major urban area where a large number of people reside, it is inevitable that radiological screening and dose assessment must be conducted. Lives may be saved if an emergency response plan and radiological screening method are established for use in such cases. Thousands to tens of thousands of people might present themselves with some levels of external contamination and/or the potential for internal contamination. Each of these individuals will require varying degrees of radiological screening, and those with a high likelihood of internal and/or external contamination will require radiological assessment to determine the need for medical attention and decontamination. This sort of radiological assessment typically requires skilled health physicists, but there are insufficient numbers of health physicists in any city to perform this function for large populations, especially since many (e.g., those at medical facilities) are likely to be engaged at their designated institutions. The aim of this paper is therefore to develop and describe the technical basis for a novel, scoring-based methodology that can be used by non-health physicists for performing radiological assessment during such radiological events.

Energy requirements for CO2 capture from ambient air (DAC) competitive with capture from flue-gas (PCC)

NASA Astrophysics Data System (ADS)

Meinrenken, Christoph

2015-03-01

Capture of CO2, whether from a flue gas source (PCC) or from distributed sources via ambient air (DAC), is a key enabling technology to provide carbon for sustainable synthetic energy carriers such as solar fuels. Based on thermodynamic minimum considerations, DAC is often expected to require about 3 times more energy (per ton CO2 captured) than PCC because CO2 in ambient air is more dilute. Here, we calculate the energy required for a humidity swing-based DAC installation that uses an anionic exchange resin as sorbent. The calculation uses recently measured equilibrium CO2 loadings of the sorbent as function of partial CO2 pressure, temperature, and humidity. We calculate the installation's electricity consumption to be about 45 kJ per mole of pure CO2 at 1 bar (scenario-dependent). Furthermore, we estimate the amount of heat provided by ambient air and thus provide context of the overall energy and entropy balance and thermodynamic minimum views. The electricity consumption is competitive with typical parasitic loads of PCC-equipped coal-fired power plants (40-50 kJ per mole at same pressure) and significantly lower than predicted for other DAC installations such as Na(OH) sorbent-based systems. Our analyses elucidate why DAC is not always more energy-intensive that PCC, thus alleviating often cited concerns of significant cost impediments. Financial support by ABB for research presented herein is gratefully acknowledged.

Thrombin Time

MedlinePlus

... Testing Leptin Levetiracetam Lipase Lipid Panel Lipoprotein (a) Lithium Liver Panel Lp-PLA2 Lupus Anticoagulant Testing Luteinizing ... thrombin time is just one component of the battery of tests typically required to evaluate a bleeding ...

F-111 Adhesive Bonded Repairs Assessment Program - Progress Report 2: Analysis of FM300-2K Repairs

DTIC Science & Technology

2015-01-01

primarily the effect of panel skin thickness The previous report found that while repair location on the aircraft structure may have had some effect...typically are manufactured by adhesively bonding an upper and lower aluminium skin to aluminium honeycomb-core. The structure provides added stiffness to...component, one of the typical repair techniques requires removal of the damaged skin and honeycomb core. New core is adhesively bonded back in place and an

A Retrospective Video Analysis of Canonical Babbling and Volubility in Infants with Fragile X Syndrome at 9 – 12 Months of Age

PubMed Central

Belardi, Katie; Watson, Linda R.; Faldowski, Richard A.; Hazlett, Heather; Crais, Elizabeth; Baranek, Grace T.; McComish, Cara; Patten, Elena; Oller, D. Kimbrough

2017-01-01

An infant’s vocal capacity develops significantly during the first year of life. Research suggests early measures of pre-speech development, such as canonical babbling and volubility, can differentiate typical versus disordered development. This study offers a new contribution by comparing early vocal development in 10 infants with Fragile X syndrome and 14 with typical development. Results suggest infants with Fragile X syndrome produce fewer syllables and have significantly lower canonical babbling ratios (i.e., canonical syllables/total syllables) compared to infants who are typically developing. Furthermore, the particular measures of babbling were strong predictors of group membership, adding evidence regarding the possible utility of these markers in early identification. PMID:28247019

Coping and Well-Being in Parents of Children with Autism Spectrum Disorders (ASD).

PubMed

Lai, Wei Wei; Goh, Tze Jui; Oei, Tian P S; Sung, Min

2015-08-01

This study examined psychological well-being and coping in parents of children with ASD and parents of typically developing children. 73 parents of children with ASD and 63 parents of typically developing children completed a survey. Parents of children with ASD reported significantly more parenting stress symptoms (i.e., negative parental self-views, lower satisfaction with parent-child bond, and experiences of difficult child behaviors), more depression symptoms, and more frequent use of Active Avoidance coping, than parents of typically developing children. Parents of children with ASD did not differ significantly in psychological well-being and coping when compared as according to child's diagnosis. Study results reinforced the importance of addressing well-being and coping needs of parents of children with ASD.

Time use of parents raising children with severe or profound intellectual and multiple disabilities.

PubMed

Luijkx, J; van der Putten, A A J; Vlaskamp, C

2017-07-01

Raising children with severe or profound intellectual and multiple disabilities (PIMD) is expected to put extreme pressure on parental time use patterns. The aim of this study was to examine the total time use of mothers and fathers raising children with PIMD and compare it with the time use of parents of typically developing children. Twenty-seven fathers and 30 mothers raising children with PIMD completed a time use diary on a mobile phone or tablet app, as did 66 fathers and 109 mothers of typically developing children. Independent t-tests and Mann-Whitney tests were performed to compare mean time use. There are no differences in the time use of parents of children with PIMD on contracted time (paid work and educational activities) and necessary time (personal care, eating and drinking and sleeping) when compared with parents of typically developing children. There are significant differences between the parents of children with PIMD and the parents of typically developing children in terms of committed time (time for domestic work and the care and supervision of their children) and free time. The mothers of children with PIMD spend significantly less time on domestic work and more time on care and supervision than mothers of typically developing children. This study shows that the parents of children with PIMD have to spend a significant amount of time on care tasks and have on average 1.5 h less free time per day than parents of typically developing children. This is a striking difference, because leisure time can substantially contribute to well-being. Therefore, it is important not only to consider a child with PIMD's support needs but also to identify what parents need to continue their children's daily care and supervision. © 2017 John Wiley & Sons Ltd.

Energy-Efficient Transmissions for Remote Wireless Sensor Networks: An Integrated HAP/Satellite Architecture for Emergency Scenarios

PubMed Central

Dong, Feihong; Li, Hongjun; Gong, Xiangwu; Liu, Quan; Wang, Jingchao

2015-01-01

A typical application scenario of remote wireless sensor networks (WSNs) is identified as an emergency scenario. One of the greatest design challenges for communications in emergency scenarios is energy-efficient transmission, due to scarce electrical energy in large-scale natural and man-made disasters. Integrated high altitude platform (HAP)/satellite networks are expected to optimally meet emergency communication requirements. In this paper, a novel integrated HAP/satellite (IHS) architecture is proposed, and three segments of the architecture are investigated in detail. The concept of link-state advertisement (LSA) is designed in a slow flat Rician fading channel. The LSA is received and processed by the terminal to estimate the link state information, which can significantly reduce the energy consumption at the terminal end. Furthermore, the transmission power requirements of the HAPs and terminals are derived using the gradient descent and differential equation methods. The energy consumption is modeled at both the source and system level. An innovative and adaptive algorithm is given for the energy-efficient path selection. The simulation results validate the effectiveness of the proposed adaptive algorithm. It is shown that the proposed adaptive algorithm can significantly improve energy efficiency when combined with the LSA and the energy consumption estimation. PMID:26404292

Energy-Efficient Transmissions for Remote Wireless Sensor Networks: An Integrated HAP/Satellite Architecture for Emergency Scenarios.

PubMed

Dong, Feihong; Li, Hongjun; Gong, Xiangwu; Liu, Quan; Wang, Jingchao

2015-09-03

A typical application scenario of remote wireless sensor networks (WSNs) is identified as an emergency scenario. One of the greatest design challenges for communications in emergency scenarios is energy-efficient transmission, due to scarce electrical energy in large-scale natural and man-made disasters. Integrated high altitude platform (HAP)/satellite networks are expected to optimally meet emergency communication requirements. In this paper, a novel integrated HAP/satellite (IHS) architecture is proposed, and three segments of the architecture are investigated in detail. The concept of link-state advertisement (LSA) is designed in a slow flat Rician fading channel. The LSA is received and processed by the terminal to estimate the link state information, which can significantly reduce the energy consumption at the terminal end. Furthermore, the transmission power requirements of the HAPs and terminals are derived using the gradient descent and differential equation methods. The energy consumption is modeled at both the source and system level. An innovative and adaptive algorithm is given for the energy-efficient path selection. The simulation results validate the effectiveness of the proposed adaptive algorithm. It is shown that the proposed adaptive algorithm can significantly improve energy efficiency when combined with the LSA and the energy consumption estimation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Constantz, Jim; Su, Grace; Hatch, Christine

Both the measurement of temperature and the simulation of heat and water transport have benefited from significant recent advances in data acquisition and computer resources. This has afforded the opportunity for routine use of heat as a tracer in a variety of hydrological regimes. Heat is particularly well suited for investigations of stream/groundwater exchanges. Dynamic temperature patterns between the stream and underlying sediments are typical, due to large stream surface area to volume ratios relative to other surface water bodies. Heat is a naturally occurring tracer, free from (real or perceived) issues of contamination associated with use of chemical tracersmore » in stream environments. The use of heat as a tracer relies on the measurement of temperature gradients, and temperature is an extremely robust parameter to monitor. Temperature data is immediately available as opposed to chemical tracers, which often require significant laboratory analysis. In this work, we report on the progress in the use of heat as a tracer to determine the hydraulic conductance of the streambed along the middle reaches of the Russian River, located west of Santa Rosa, CA. The general hydrological setting is described and the unique matter in which the water resources are managed in an environment of increasing population, a rapid shift to agricultural crops requiring more irrigation, and a series of fishery related mandates.« less

Optimal Time-Resource Allocation for Energy-Efficient Physical Activity Detection

PubMed Central

Thatte, Gautam; Li, Ming; Lee, Sangwon; Emken, B. Adar; Annavaram, Murali; Narayanan, Shrikanth; Spruijt-Metz, Donna; Mitra, Urbashi

2011-01-01

The optimal allocation of samples for physical activity detection in a wireless body area network for health-monitoring is considered. The number of biometric samples collected at the mobile device fusion center, from both device-internal and external Bluetooth heterogeneous sensors, is optimized to minimize the transmission power for a fixed number of samples, and to meet a performance requirement defined using the probability of misclassification between multiple hypotheses. A filter-based feature selection method determines an optimal feature set for classification, and a correlated Gaussian model is considered. Using experimental data from overweight adolescent subjects, it is found that allocating a greater proportion of samples to sensors which better discriminate between certain activity levels can result in either a lower probability of error or energy-savings ranging from 18% to 22%, in comparison to equal allocation of samples. The current activity of the subjects and the performance requirements do not significantly affect the optimal allocation, but employing personalized models results in improved energy-efficiency. As the number of samples is an integer, an exhaustive search to determine the optimal allocation is typical, but computationally expensive. To this end, an alternate, continuous-valued vector optimization is derived which yields approximately optimal allocations and can be implemented on the mobile fusion center due to its significantly lower complexity. PMID:21796237

Ecological Processes of Isolated Wetlands: Ecosystem Services and the Significant Nexus (Invited)

NASA Astrophysics Data System (ADS)

Lane, C.; Autrey, B.; D'Amico, E.

2013-12-01

Geographically isolated wetlands occur throughout the US and are characterized by a wetland system completely surrounded by uplands. Examples include prairie potholes, woodland seasonal (i.e., vernal) pools, cypress domes, playas, and other such systems. Decisions by the US Supreme Court in 2001 and 2006 have affected the jurisdictional status of geographically isolated wetlands such that those failing to have a demonstrable 'significant nexus' to navigable waters may have no federal protection under the Clean Water Act. These systems are typically small and, as such, may be under-counted in assessments of area and abundance. Areal extent is a portion of the information required to characterize the functions associated with geographically isolated wetlands and understanding both site-specific and larger-scale processes are also required to better quantify those functions. In addition, quantifying anthropogenic effects on system processing informs our understanding of the contributions and the connectivity of geographically isolated wetlands to other waters. This presentation focuses on both efforts to quantify the contribution of geographically isolated wetlands to system-scale processes, focusing on nutrient assimilation and hydrologic storage, as well as concurrent research to identify their locations at multiple scales. Findings from this research may help elucidate the link between geographically isolated wetlands and other systems, and may inform discussions on ecosystem services provided by geographically isolated wetlands.

A Novel Design Approach for Self-Crack-Healing Structural Ceramics with 3D Networks of Healing Activator.

PubMed

Osada, Toshio; Kamoda, Kiichi; Mitome, Masanori; Hara, Toru; Abe, Taichi; Tamagawa, Yuki; Nakao, Wataru; Ohmura, Takahito

2017-12-19

Self-crack-healing by oxidation of a pre-incorporated healing agent is an essential property of high-temperature structural ceramics for components with stringent safety requirements, such as turbine blades in aircraft engines. Here, we report a new approach for a self-healing design containing a 3D network of a healing activator, based on insight gained by clarifying the healing mechanism. We demonstrate that addition of a small amount of an activator, typically doped MnO localised on the fracture path, selected by appropriate thermodynamic calculation significantly accelerates healing by >6,000 times and significantly lowers the required reaction temperature. The activator on the fracture path exhibits rapid fracture-gap filling by generation of mobile supercooled melts, thus enabling efficient oxygen delivery to the healing agent. Furthermore, the activator promotes crystallisation of the melts and forms a mechanically strong healing oxide. We also clarified that the healing mechanism could be divided to the initial oxidation and additional two stages. Based on bone healing, we here named these stages as inflammation, repair, and remodelling stages, respectively. Our design strategy can be applied to develop new lightweight, self-healing ceramics suitable for use in high- or low-pressure turbine blades in aircraft engines.

A non-laser light source for photodynamic therapy: in vitro effects on normal and malignant cells.

PubMed

Kashtan, Hanoch; Haddad, Riad; Greenberg, Ron; Skornick, Yehuda; Kaplan, Ofer

2002-01-01

Photodynamic therapy (PDT) involves the use of photosensitizing drugs combined with light to treat tumors. Laser systems, the current source of light for PDT, have several inherent drawbacks: the spectrum is essentially monochromatic which may be problematic for second generation photosensitizers, the systems are bulky and nearly impossible to move between hospital locations and require complicated electrical and cooling installations, the cost of a typical system is enormous, and its maintenance and operation require highly trained personnel. We now introduce a new non-laser light system, Versa-Light, which appears to work as effectively and has none of the above drawbacks. A series of in vitro studies were performed using various murine and human normal and cancer cells which underwent PDT using aluminum phthalocyanine (AlPcS4) as a photosensitizer and Versa-Light as the light source. PDT of cancer cells at light energy levels of 50, 100 and 200 j/cm2 significantly decreased cell viability. PDT also decreased cell viability of normal murine splenocytes and normal human lymphocytes, but to a lesser extent. The observed significant hyperthermia was light dose-dependent. We believe that Versa-Light can replace laser systems as an enhanced light source for PDT. Further in vitro and pre-clinical studies are in progress.

Optimization of Primary Drying in Lyophilization during Early Phase Drug Development using a Definitive Screening Design with Formulation and Process Factors.

PubMed

Goldman, Johnathan M; More, Haresh T; Yee, Olga; Borgeson, Elizabeth; Remy, Brenda; Rowe, Jasmine; Sadineni, Vikram

2018-06-08

Development of optimal drug product lyophilization cycles is typically accomplished via multiple engineering runs to determine appropriate process parameters. These runs require significant time and product investments, which are especially costly during early phase development when the drug product formulation and lyophilization process are often defined simultaneously. Even small changes in the formulation may require a new set of engineering runs to define lyophilization process parameters. In order to overcome these development difficulties, an eight factor definitive screening design (DSD), including both formulation and process parameters, was executed on a fully human monoclonal antibody (mAb) drug product. The DSD enables evaluation of several interdependent factors to define critical parameters that affect primary drying time and product temperature. From these parameters, a lyophilization development model is defined where near optimal process parameters can be derived for many different drug product formulations. This concept is demonstrated on a mAb drug product where statistically predicted cycle responses agree well with those measured experimentally. This design of experiments (DoE) approach for early phase lyophilization cycle development offers a workflow that significantly decreases the development time of clinically and potentially commercially viable lyophilization cycles for a platform formulation that still has variable range of compositions. Copyright © 2018. Published by Elsevier Inc.

76 FR 32073 - Investing in Innovation Fund

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-03

... that the current evidence requirements established in the 2010 i3 NFP focus too heavily on experimental and quasi-experimental studies that are typically possible only for more mature organizations and...

78 FR 21188 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-09

... wholly outside of its control. Typically, maintenance responsibilities for in- pavement inductive-loop... exit gates not impacted by State design parameters that require such gates to remain in the vertical...

Multiplexed chemostat system for quantification of biodiversity and ecosystem functioning in anaerobic digestion

PubMed Central

Plouchart, Diane; Guizard, Guillaume; Latrille, Eric

2018-01-01

Continuous cultures in chemostats have proven their value in microbiology, microbial ecology, systems biology and bioprocess engineering, among others. In these systems, microbial growth and ecosystem performance can be quantified under stable and defined environmental conditions. This is essential when linking microbial diversity to ecosystem function. Here, a new system to test this link in anaerobic, methanogenic microbial communities is introduced. Rigorously replicated experiments or a suitable experimental design typically require operating several chemostats in parallel. However, this is labor intensive, especially when measuring biogas production. Commercial solutions for multiplying reactors performing continuous anaerobic digestion exist but are expensive and use comparably large reactor volumes, requiring the preparation of substantial amounts of media. Here, a flexible system of Lab-scale Automated and Multiplexed Anaerobic Chemostat system (LAMACs) with a working volume of 200 mL is introduced. Sterile feeding, biomass wasting and pressure monitoring are automated. One module containing six reactors fits the typical dimensions of a lab bench. Thanks to automation, time required for reactor operation and maintenance are reduced compared to traditional lab-scale systems. Several modules can be used together, and so far the parallel operation of 30 reactors was demonstrated. The chemostats are autoclavable. Parameters like reactor volume, flow rates and operating temperature can be freely set. The robustness of the system was tested in a two-month long experiment in which three inocula in four replicates, i.e., twelve continuous digesters were monitored. Statistically significant differences in the biogas production between inocula were observed. In anaerobic digestion, biogas production and consequently pressure development in a closed environment is a proxy for ecosystem performance. The precision of the pressure measurement is thus crucial. The measured maximum and minimum rates of gas production could be determined at the same precision. The LAMACs is a tool that enables us to put in practice the often-demanded need for replication and rigorous testing in microbial ecology as well as bioprocess engineering. PMID:29518106

The ecology, behaviour and physiology of fishes on coral reef flats, and the potential impacts of climate change.

PubMed

Harborne, A R

2013-09-01

Reef flats, typically a low-relief carbonate and sand habitat in shallow water leeward of the reef crest, are one of the most extensive zones on Pacific coral reefs. This shallow zone often supports an abundant and diverse fish assemblage that is exposed to more significant variations in physical factors, such as water depth and movement, temperature and ultraviolet (UV) radiation levels, than most other reef fishes. This review examines the characteristics of reef flat fish assemblages, and then investigates what is known about how they respond to their biophysical environment. Because of the challenges of living in shallow, wave-exposed water, reef flats typically support a distinct fish assemblage compared to other reef habitats. This assemblage clearly changes across tidal cycles as some larger species migrate to deeper water at low tide and other species modify their behaviour, but quantitative data are generally lacking. At least some reef flat fish species are well-adapted to high temperatures, low oxygen concentrations and high levels of UV radiation. These behavioural and physiological adaptations suggest that there may be differences in the demographic processes between reef flat assemblages and those in deeper water. Indeed, there is some evidence that reef flats may act as nurseries for some species, but more research is required. Further studies are also required to predict the effects of climate change, which is likely to have multifaceted impacts on reef flats by increasing temperature, water motion and sediment load. Sea-level rise may also affect reef flat fish assemblages and food webs by increasing the amount of time that larger species are able to forage in this zone. The lack of data on reef flats is surprising given their size and relative ease of access, and a better understanding of their functional role within tropical marine seascapes is urgently required. © 2013 The Fisheries Society of the British Isles.

The global Cretaceous-Tertiary fire: Biomass or fossil carbon

NASA Technical Reports Server (NTRS)

Gilmour, Iain; Guenther, Frank

1988-01-01

The global soot layer at the K-T boundary indicates a major fire triggered by meteorite impact. However, it is not clear whether the principal fuel was biomass or fossil carbon. Forests are favored by delta value of C-13, which is close to the average for trees, but the total amount of elemental C is approximately 10 percent of the present living carbon, and thus requires very efficient conversion to soot. The PAH was analyzed at Woodside Creek, in the hope of finding a diagnostic molecular marker. A promising candidate is 1-methyl-7-isopropyl phenanthrene (retene,), which is probably derived by low temperature degradation of abietic acid. Unlike other PAH that form by pyrosynthesis at higher temperatures, retene has retained the characteristic side chains of its parent molecule. A total of 11 PAH compounds were identified in the boundary clay. Retene is present in substantial abundance. The identification was confirmed by analysis of a retene standard. Retene is characteristic of the combustion of resinous higher plants. Its formation depends on both temperature and oxygen access, and is apparently highest in oxygen-poor fires. Such fires would also produce soot more efficiently which may explain the high soot abundance. The relatively high level of coronene is not typical of a wood combustion source, however, though it can be produced during high temperature pyrolysis of methane, and presumably other H, C-containing materials. This would require large, hot, low O2 zones, which may occur only in very large fires. The presence of retene indicates that biomass was a significant fuel source for the soot at the Cretaceous-Tertiary boundary. The total amount of elemental C produced requires a greater than 3 percent soot yield, which is higher than typically observed for wildfires. However, retene and presumably coronene imply limited access of O2 and hence high soot yield.

The design and fabrication of a prototype trash compacting unit. [for long duration space missions

NASA Technical Reports Server (NTRS)

1973-01-01

A prototype trash compactor, that is compatible with the anticipated requirements of future long-term space missions, is described. Preliminary problem definition studies were conducted to identify typical types and quantities of waste materials to be expected from a typical mission. Bench-scale compaction tests were then conducted on typical waste materials to determine force/compaction curves. These data were used to design a boilerplate compactor that was fabricated to prove the feasibility of the basic design concept. A final design was then prepared from which the deliverable unit was fabricated. Design concepts are presented for suggested further development of the compactor, including a version that is capable of handling wet biodegradable wastes.

Air Force space power and thermal management technology - Requirements for the early 21st century

NASA Astrophysics Data System (ADS)

Herrera, Ernest D.; Kuck, Inara

Typical projections for military space power and thermal management technologies have posited requirements for high powered and highly survivable systems. Recent changes in defense needs, however, will require spacecraft that are smaller, lower powered, less survivable, and highly proliferated. Technologies will be developed to provide low cost, ultra-light, high power density, 'smart' conventional power systems. Compact nuclear power systems will also be developed to meet higher power needs.

Pelvic Inlet Shape Is Not as Dimorphic as Previously Suggested.

PubMed

Delprete, Hillary

2017-04-01

It is well known that there are significant differences in the pelves of males and females due, in part, to differing constraints. The male and female pelves must be suitable for upright posture and locomotion, but the female pelvis must also be suitable for reproduction. These differing requirements lead to differences in the shape and size of various pelvic dimensions. These differences are reflected in the pelvic inlet, midplane, and outlet. Current research has documented dimorphisms in the posterior and anterior spaces in all three of these planes. One measure however, that is calculated from the relationship between the length of the anterior-posterior diameter (APD) and the transverse diameter (TD) of the inlet, is not as dimorphic as previously suggested. This computed value is used to describe four main categories of inlet shape: android, gynecoid, anthropoid, and platypelloid. Current textbooks in anatomy and midwifery describe these forms and identify the typical male inlet shape as android and the typical female inlet shape as gynecoid. In this study, however, using skeletonized pelves of 378 adult individuals from three identified skeletal collections, the most common inlet shape for both males and females was android. In addition, when examining shape as a continuous variable, inlet shape is not sexually dimorphic in two of the three populations examined in this study. Based on the results of this study, the inlet shape for males and females is less dimorphic than previously thought, and we need to discontinue using pelvic categories to describe typical inlet shape. Anat Rec, 300:706-715, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Hyperheat: a thermal signature model for super- and hypersonic missiles

NASA Astrophysics Data System (ADS)

van Binsbergen, S. A.; van Zelderen, B.; Veraar, R. G.; Bouquet, F.; Halswijk, W. H. C.; Schleijpen, H. M. A.

2017-10-01

In performance prediction of IR sensor systems for missile detection, apart from the sensor specifications, target signatures are essential variables. Very often, for velocities up to Mach 2-2.5, a simple model based on the aerodynamic heating of a perfect gas was used to calculate the temperatures of missile targets. This typically results in an overestimate of the target temperature with correspondingly large infrared signatures and detection ranges. Especially for even higher velocities, this approach is no longer accurate. Alternatives like CFD calculations typically require more complex sets of inputs and significantly more computing power. The MATLAB code Hyperheat was developed to calculate the time-resolved skin temperature of axisymmetric high speed missiles during flight, taking into account the behaviour of non-perfect gas and proper heat transfer to the missile surface. Allowing for variations in parameters like missile shape, altitude, atmospheric profile, angle of attack, flight duration and super- and hypersonic velocities up to Mach 30 enables more accurate calculations of the actual target temperature. The model calculates a map of the skin temperature of the missile, which is updated over the flight time of the missile. The sets of skin temperature maps are calculated within minutes, even for >100 km trajectories, and can be easily converted in thermal infrared signatures for further processing. This paper discusses the approach taken in Hyperheat. Then, the thermal signature of a set of typical missile threats is calculated using both the simple aerodynamic heating model and the Hyperheat code. The respective infrared signatures are compared, as well as the difference in the corresponding calculated detection ranges.

Delay of gratification: a comparison study of children with Down syndrome, moderate intellectual disability and typical development.

PubMed

Cuskelly, M; Gilmore, L; Glenn, S; Jobling, A

2016-09-01

Self-regulation has been found to be an important contributor to a range of outcomes, with delay of gratification (a self-regulatory skill) predicting better academic, social and personal functioning. There is some evidence that individuals with Down syndrome have difficulty with delay of gratification. We investigated the question of whether this difficulty is common to intellectual disability irrespective of aetiology, or whether it presents a particular problem for those with Down syndrome. The latter was considered a possibility because of language difficulties in this group. Three groups of children with a mean MA between 36 and 60 months participated in the study: children with Down syndrome (n = 32), children with a moderate intellectual disability from a cause other than Down syndrome (n = 26) and typically developing children (n = 50). Children completed a series of measures of language and cognitive functioning and participated in a delay of gratification task. The group of children with Down syndrome delayed for a significantly shorter time than either of the other two groups that did not differ from each other. Receptive language was associated with delay time for the children with Down syndrome but not for the typically developing group, nor for the group with moderate intellectual disability. Children with Down syndrome appear to have a particular difficulty with delay of gratification. Language abilities would seem to be implicated in this difficulty, although further examination of this hypothesis is required. © 2016 MENCAP and International Association of the Scientific Study of Intellectual and Developmental Disabilities and John Wiley & Sons Ltd.

"Smoke": Characterization Of Smoke Particulate For Spacecraft Fire Detection

NASA Technical Reports Server (NTRS)

Urban, David L.; Mulholland, George W.; Yang, Jiann; Cleary, Thomas G.; Yuan, Zeng-Guang

2003-01-01

The "Smoke" experiment is a flight definition investigation that seeks to increase our understanding of spacecraft fire detection through measurements of particulate size distributions of preignition smokes from typical spacecraft materials. Owing to the catastrophic risk posed by even a very small fire in a spacecraft, the design goal for spacecraft fire detection is to detect the fire as quickly as possible, preferably in the preignition phase before a real flaming fire has developed. Consequently the target smoke for detection is typically not soot (typical of established hydrocarbon fires) but instead, pyrolysis products, and recondensed polymer particles. At the same time, false alarms are extremely costly as the crew and the ground team must respond quickly to every alarm. The U.S. Space Shuttle (STS: Space Transportation System) and the International Space Station (ISS) both use smoke detection as the primary means of fire detection. These two systems were designed in the absence of any data concerning low-gravity smoke particle (and background dust) size distributions. The STS system uses an ionization detector coupled with a sampling pump and the ISS system is a forward light scattering detector operating in the near IR. These two systems have significantly different sensitivities with the ionization detector being most sensitive (on a mass concentration basis) to smaller particulate and the light scattering detector being most sensitive to particulate that is larger than 1 micron. Since any smoke detection system has inherent size sensitivity characteristics, proper design of future smoke detection systems will require an understanding of the background and alarm particle size distributions that can be expected in a space environment.

Celiac disease in 87 children with typical and atypical symptoms in Black Sea region of Turkey.

PubMed

Dinler, Gönül; Atalay, Erdal; Kalayci, Ayhan Gazi

2009-11-01

Celiac disease presents with a spectrum of clinical disorders. The variety of clinical presentations largely depends on age and extraintestinal findings. This study aimed to determine typical and atypical cases according to presenting symptoms and to evaluate their biochemical and pathological parameters. Eighty-seven patients with celiac disease in our unit between 2000 and 2007 were reviewed. Their diagnosis was made by serological and histological examination. The patients were divided into two groups according to their typical or atypical symptoms. The mean age of the patients at diagnosis was 8.2 years (range, 1-18 years), but patients presenting with typical symptoms were younger than those presenting with atypical symptoms. The patients in the two groups did not differ significantly in sex, weight and height Z scores except age. Diarrhea (96.3%), abdominal distention (65.4%) and failure to thrive (60%) were the most common clinical presentations in the typical group, and short stature (62.5%) and anemia (31.2%) were the most common in the atypical group. Total/subtotal villous atrophy was significantly higher in the typical group than in the atypical group. Many children with celiac disease show an atypical form. The understanding of presentations of celiac disease may prevent delayed diagnosis. Celiac disease should be specially investigated in patients with recurrent iron deficiency anemia, short stature and autoimmune disorders.

Uneven reductions in high school students' alcohol use from 2007 to 2012 by age, sex, and socioeconomic strata.

PubMed

Jackson, Nicki; Denny, Simon; Sheridan, Janie; Fleming, Terry; Clark, Terryann; Peiris-John, Roshini; Ameratunga, Shanthi

2017-01-01

Many Western countries have reported declines in adolescent alcohol use. This study examined changes in adolescent alcohol use in New Zealand between 2007 and 2012 and explored variations across sociodemographic strata. Data from 2 nationally representative, cross-sectional high school surveys conducted in 2007 (n = 7709) and 2012 (n = 7266) were examined. Changes in the prevalence of drinking in the past 4 weeks were examined among the total sample, as well as the frequency of drinking in the past 4 weeks and typical drinking-occasion quantity among drinkers. Only students residing in urban areas were included. Variation in changes was investigated across 4 demographic groups characterized by age (<16 years, ≥16 years) and sex. Interactions with household- and neighborhood-level socioeconomic position (SEP) identified any differential changes between socioeconomic strata. From 2007 to 2012, significantly fewer students consumed alcohol in the past 4 weeks. Interaction analyses demonstrated that, among young females (<16 years), declines were significantly greater among those of high household SEP when compared with those of low household SEP. Among drinkers, reductions in the frequency of drinking were found among all demographic groups and SEP strata. Interaction analyses revealed that only young males (<16 years) showed significantly reduced typical drinking-occasion quantities. Among young females, significant interactions revealed a shift towards increasing typical drinking-occasion quantities among those of low household and neighborhood SEP, whereas their more advantaged counterparts showed no significant change over time. Fewer drinking occasions characterized the major declines in adolescent drinking between 2007 and 2012. Whereas young males showed reductions in the typical quantity consumed, young females of low household and neighborhood SEP progressed towards higher typical quantities. To address the uneven distribution of alcohol-related harm and improve the targeting of harm reduction initiatives, it remains imperative to examine changes in both the overall shift and shape of the distribution curve.

An Elephant in the Room: Bias in Evaluating a Required Quantitative Methods Course

ERIC Educational Resources Information Center

Fletcher, Joseph F.; Painter-Main, Michael A.

2014-01-01

Undergraduate Political Science programs often require students to take a quantitative research methods course. Such courses are typically among the most poorly rated. This can be due, in part, to the way in which courses are evaluated. Students are generally asked to provide an overall rating, which, in turn, is widely used by students, faculty,…

Computer Resources Handbook for Flight Critical Systems.

DTIC Science & Technology

1985-01-01

8183 UNCLASSIFIED F /G 1 /3 NLllEEEEEEEEEEEE Illll lflflflflfl Illlfll..lflll EIEEIhEEIIIIII llElfllfllflfllfll .flflflflflflflflflflflll llEEEEEEllEII...Requiring Simulation .... ............. ... 114 6-4 Typical Transition Elements of Care III. ...... ............ 116 D- 1 F -16 Digital Flight Control...following forms: 1 . By reference to MIL- F -9490(for flight control systems); 2. By reference, with tailoring if required, to a Federal Aviation Regulation

Do Policies that Encourage Better Attendance in Lab Change Students' Academic Behaviors and Performances in Introductory Science Courses?

ERIC Educational Resources Information Center

Moore, Randy; Jensen, Philip A.

2008-01-01

Science courses with hands-on investigative labs are a typical part of the general education requirements at virtually all colleges and universities. In these courses, labs that satisfy a curricular requirement for "lab experience" are important because they provide the essence of the scientific experience--that is, they give students…

Conditions under which Young Children Can Hold Two Rules in Mind and Inhibit a Prepotent Response.

ERIC Educational Resources Information Center

Diamond, Adele; Kirkham, Natasha; Amso, Dima

2002-01-01

Systematically varied the day-night task requiring children to say "night" to a sun picture and "day" to a moon picture to investigate why young children typically fail the task. Found that reducing memory load did not help performance. Reducing inhibitory demand by requiring an unrelated response or inserting a delay between…

The Benefit of Interleaved Mathematics Practice Is Not Limited to Superficially Similar Kinds of Problems

ERIC Educational Resources Information Center

Rohrer, Doug; Dedrick, Robert F.; Burgess, Kaleena

2014-01-01

Most mathematics assignments consist of a group of problems requiring the same strategy. For example, a lesson on the quadratic formula is typically followed by a block of problems requiring students to use the quadratic formula, which means that students know the appropriate strategy before they read each problem. In an alternative approach,…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rivkin, C.; Blake, C.; Burgess, R.

This report explains the Regulations, Codes, and Standards (RCS) requirements for hydrogen dispensing stations in the State of California. The reports shows the basic components of a hydrogen dispensing station in a simple schematic drawing; the permits and approvals that would typically be required for the construction and operation of a hydrogen dispensing station; and a basic permit that might be employed by an Authority Having Jurisdiction (AHJ).

Submersible Aircraft Concept Design Study

DTIC Science & Technology

2010-08-01

capable of submerging at the expense of in-air efficiency; 2. creating a low density submersible requiring dynamic lift to stay submerged at the...density solution would require some additional submergence force. Whilst dynamic lift underwater could be easily achieved by the already present...turbo-prop characteristics for the submersible aircraft concept. Turbo-props are typically specified in terms of shaft horse power ( shp ) rather than

How Much Math Do Students Need to Succeed in Business and Economics Statistics? An Ordered Probit Analysis

ERIC Educational Resources Information Center

Green, Jeffrey J.; Stone, Courtenay C.; Zegeye, Abera; Charles, Thomas A.

2009-01-01

Because statistical analysis requires the ability to use mathematics, students typically are required to take one or more prerequisite math courses prior to enrolling in the business statistics course. Despite these math prerequisites, however, many students find it difficult to learn business statistics. In this study, we use an ordered probit…

Federal Information Security and Data Breach Notification Laws

DTIC Science & Technology

2009-01-29

The following report describes information security and data breach notification requirements included in the Privacy Act, the Federal Information...information for unauthorized purposes. Data breach notification laws typically require covered entities to implement a breach notification policy, and...Feinstein), S. 495 (Leahy), and S. 1178 (Inouye)--were reported favorably out of Senate committees. Those bills include information security and data

Resolution requirements for aero-optical simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mani, Ali; Wang Meng; Moin, Parviz

2008-11-10

Analytical criteria are developed to estimate the error of aero-optical computations due to inadequate spatial resolution of refractive index fields in high Reynolds number flow simulations. The unresolved turbulence structures are assumed to be locally isotropic and at low turbulent Mach number. Based on the Kolmogorov spectrum for the unresolved structures, the computational error of the optical path length is estimated and linked to the resulting error in the computed far-field optical irradiance. It is shown that in the high Reynolds number limit, for a given geometry and Mach number, the spatial resolution required to capture aero-optics within a pre-specifiedmore » error margin does not scale with Reynolds number. In typical aero-optical applications this resolution requirement is much lower than the resolution required for direct numerical simulation, and therefore, a typical large-eddy simulation can capture the aero-optical effects. The analysis is extended to complex turbulent flow simulations in which non-uniform grid spacings are used to better resolve the local turbulence structures. As a demonstration, the analysis is used to estimate the error of aero-optical computation for an optical beam passing through turbulent wake of flow over a cylinder.« less

Tension pneumocephalus following suboccipital sitting craniotomy in the pediatric population.

PubMed

Daszkiewicz, P; Dziedzic, D

Sitting craniotomy often results in entrapment of air in fluid-filled intracranial cavities. Gas under pressure exerts a deleterious effect on adjacent nervous tissue, resulting in clinical deterioration. To assess the incidence of tension pneumocephalus (TP) and to define risk factors associated therewith. Analysis included 100 consecutive patients (57 boys, 43 girls, mean age 9.7 y) undergoing suboccipital sitting craniotomy since 2012 to 2014. In our material (n=100) TP was seen in 7 cases, asymptomatic pneumocephalus (AP) in 77 and no pneumocephalus (NP) in 16. Tumor types encountered were typical for pediatric population. In the TP group (n=7) the ratio of low-grade to high-grade tumors was 5:2, in the AP group (n=77) 2:1 and in the NP group (n=16) 1:1. Preoperative hydrocephalus was present in 21 cases (21%, mean incidence), thereof 3 in the TP group (3/7; 42.8%), 12 in AP group (12/77; 15.5%) and 6 in the NP group (6/16; 37.5%). All TP patients received an emergency external drainage, thereof 4 required a permanent ventriculo-peritoneal shunt (57.1%), while AP and NP patients combined (n=93) required a permanent shunt in 4 cases only (4.3%). TP-associated morbidity (n=2) consisted in a significant deterioration of neurological condition. TP is a relatively rare but potentially serious complication of suboccipital sitting craniotomy. Risk factors for TP are low-grade tumor and pre-existing long-standing hydrocephalus. TP requires emergency decompression by temporary external drainage. TP patients significantly more often require a permanent CSF shunt. Copyright © 2017. Published by Elsevier Urban & Partner Sp. z o.o.

NGAP: Compliance as a Service

NASA Astrophysics Data System (ADS)

McLaughlin, B. D.; Pawloski, A. W.

2015-12-01

Modern development practices require the ability to quickly and easily host an application. Small projects cannot afford to maintain a large staff for infrastructure maintenance. Rapid prototyping fosters innovation. However, maintaining the integrity of data and systems demands care, particularly in a government context. The extensive data holdings that make up much of the value of NASA's EOSDIS (Earth Observing System Data and Information System) are stored in a number of locations, across a wide variety of applications, ranging from small prototypes to large computationally-intensive operational processes.However, it is increasingly difficult for an application to implement the required security controls, perform required registrations and inventory entries, ensure logging, monitoring, patching, and then ensure that all these activities continue for the life of that application, let alone five, or ten, or fifty applications. This process often takes weeks or months to complete and requires expertise in a variety of different domains such as security, systems administration, development, etc.NGAP, the Next Generation Application Platform, is tackling this problem by investigating, automating, and resolving many of the repeatable policy hurdles that a typical application must overcome. This platform provides a relatively simple and straightforward process by which applications can commit source code to a repository and then deploy that source code to a cloud-based infrastructure, all while meeting NASA's policies for security, governance, inventory, reliability, and availability. While there is still work for the application owner for any application hosting, NGAP handles a significant portion of that work.This talk will discuss areas where we have made significant progress, areas that are complex or must remain human-intensive, and areas where we are still striving to improve this application deployment and hosting pipeline.

N-ViroTech--a novel process for the treatment of nutrient limited wastewaters.

PubMed

Slade, A H; Gapes, D J; Stuthridge, T R; Anderson, S M; Dare, P H; Pearson, H G W; Dennis, M

2004-01-01

As pulp and paper wastewaters are mostly deficient in nitrogen and phosphorus, historical practice has dictated that they cannot be effectively treated using microbiological processes without the addition of supplementary nutrients, such as urea and phosphoric acid. Supplementation is a difficult step to manage efficiently, requiring extensive post-treatment monitoring and some degree of overdosing to ensure sufficient nutrient availability under all conditions. As a result, treated wastewaters usually contain excess amounts of both nutrients, leading to potential impacts on the receiving waters such as eutrophication. N-ViroTech is a highly effective alternative treatment technology which overcomes this nutrient deficiency/excess paradox. The process relies on communities of nitrogen-fixing bacteria, which are able to directly fix nitrogen from the atmosphere, thus satisfying their cellular nitrogen requirements. The process relies on manipulation of growth conditions within the biological system to maintain a nitrogen-fixing population whilst achieving target wastewater treatment performance. The technology has significant advantages over conventional activated sludge operation, including: Improved environmental performance. Nutrient loadings in the final treated effluent for selected nitrogen and phosphorus species (particularly ammonium and orthophosphate) may be reduced by over 90% compared to conventional systems; Elimination of nitrogen supplementation, and minimisation of phosphorus supplementation, thus achieving significant chemical savings and resulting in between 25% and 35% savings in operational costs for a typical system; Self-regulation of nutrient requirements, as the bacteria only use as much nitrogen as they require, allowing for substantially less operator intervention and monitoring. This paper will summarise critical performance outcomes of the N-ViroTech process utilising results from laboratory-, pilot-scale and recent alpha-adopter, full-scale trials.

Task-related modulation of visual neglect in cancellation tasks

PubMed Central

Sarri, Margarita; Greenwood, Richard; Kalra, Lalit; Driver, Jon

2008-01-01

Unilateral neglect involves deficits of spatial exploration and awareness that do not always affect a fixed portion of extrapersonal space, but may vary with current stimulation and possibly with task demands. Here, we assessed any ‘top-down’, task-related influences on visual neglect, with novel experimental variants of the cancellation test. Many different versions of the cancellation test are used clinically, and can differ in the extent of neglect revealed, though the exact factors determining this are not fully understood. Few cancellation studies have isolated the influence of top-down factors, as typically the stimuli are changed also when comparing different tests. Within each of three cancellation studies here, we manipulated task factors, while keeping visual displays identical across conditions to equate purely bottom-up factors. Our results show that top-down task-demands can significantly modulate neglect as revealed by cancellation on the same displays. Varying the target/non-target discrimination required for identical displays has a significant impact. Varying the judgement required can also have an impact on neglect even when all items are targets, so that non-targets no longer need filtering out. Requiring local versus global aspects of shape to be judged for the same displays also has a substantial impact, but the nature of discrimination required by the task still matters even when local/global level is held constant (e.g. for different colour discriminations on the same stimuli). Finally, an exploratory analysis of lesions among our neglect patients suggested that top-down task-related influences on neglect, as revealed by the new cancellation experiments here, might potentially depend on right superior temporal gyrus surviving the lesion. PMID:18790703

Task-related modulation of visual neglect in cancellation tasks.

PubMed

Sarri, Margarita; Greenwood, Richard; Kalra, Lalit; Driver, Jon

2009-01-01

Unilateral neglect involves deficits of spatial exploration and awareness that do not always affect a fixed portion of extrapersonal space, but may vary with current stimulation and possibly with task demands. Here, we assessed any 'top-down', task-related influences on visual neglect, with novel experimental variants of the cancellation test. Many different versions of the cancellation test are used clinically, and can differ in the extent of neglect revealed, though the exact factors determining this are not fully understood. Few cancellation studies have isolated the influence of top-down factors, as typically the stimuli are changed also when comparing different tests. Within each of three cancellation studies here, we manipulated task factors, while keeping visual displays identical across conditions to equate purely bottom-up factors. Our results show that top-down task demands can significantly modulate neglect as revealed by cancellation on the same displays. Varying the target/non-target discrimination required for identical displays has a significant impact. Varying the judgement required can also have an impact on neglect even when all items are targets, so that non-targets no longer need filtering out. Requiring local versus global aspects of shape to be judged for the same displays also has a substantial impact, but the nature of discrimination required by the task still matters even when local/global level is held constant (e.g. for different colour discriminations on the same stimuli). Finally, an exploratory analysis of lesions among our neglect patients suggested that top-down task-related influences on neglect, as revealed by the new cancellation experiments here, might potentially depend on right superior temporal gyrus surviving the lesion.

Using dust, gas and stellar mass-selected samples to probe dust sources and sinks in low-metallicity galaxies

NASA Astrophysics Data System (ADS)

De Vis, P.; Gomez, H. L.; Schofield, S. P.; Maddox, S.; Dunne, L.; Baes, M.; Cigan, P.; Clark, C. J. R.; Gomez, E. L.; Lara-López, M.; Owers, M.

2017-10-01

We combine samples of nearby galaxies with Herschel photometry selected on their dust, metal, H I and stellar mass content, and compare these to chemical evolution models in order to discriminate between different dust sources. In a companion paper, we used an H I-selected sample of nearby galaxies to reveal a subsample of very gas-rich (gas fraction >80 per cent) sources with dust masses significantly below predictions from simple chemical evolution models, and well below Md/M* and Md/Mgas scaling relations seen in dust and stellar-selected samples of local galaxies. We use a chemical evolution model to explain these dust-poor, but gas-rich, sources as well as the observed star formation rates (SFRs) and dust-to-gas ratios. We find that (I) a delayed star formation history is required to model the observed SFRs; (II) inflows and outflows are required to model the observed metallicities at low gas fractions; (III) a reduced contribution of dust from supernovae (SNe) is needed to explain the dust-poor sources with high gas fractions. These dust-poor, low stellar mass galaxies require a typical core-collapse SN to produce 0.01-0.16 M⊙ of dust. To match the observed dust masses at lower gas fractions, significant grain growth is required to counteract the reduced contribution from dust in SNe and dust destruction from SN shocks. These findings are statistically robust, though due to intrinsic scatter it is not always possible to find one single model that successfully describes all the data. We also show that the dust-to-metal ratio decreases towards lower metallicity.

Object-based attention benefits reveal selective abnormalities of visual integration in autism.

PubMed

Falter, Christine M; Grant, Kate C Plaisted; Davis, Greg

2010-06-01

A pervasive integration deficit could provide a powerful and elegant account of cognitive processing in autism spectrum disorders (ASD). However, in the case of visual Gestalt grouping, typically assessed by tasks that require participants explicitly to introspect on their own grouping perception, clear evidence for such a deficit remains elusive. To resolve this issue, we adopt an index of Gestalt grouping from the object-based attention literature that does not require participants to assess their own grouping perception. Children with ASD and mental- and chronological-age matched typically developing children (TD) performed speeded orientation discriminations of two diagonal lines. The lines were superimposed on circles that were either grouped together or segmented on the basis of color, proximity or these two dimensions in competition. The magnitude of performance benefits evident for grouped circles, relative to ungrouped circles, provided an index of grouping under various conditions. Children with ASD showed comparable grouping by proximity to the TD group, but reduced grouping by similarity. ASD seems characterized by a selective bias away from grouping by similarity combined with typical levels of grouping by proximity, rather than by a pervasive integration deficit.

Transient Hypothyroidism after Radioiodine for Graves’ Disease: Challenges in Interpreting Thyroid Function Tests

PubMed Central

Sheehan, Michael T.; Doi, Suhail A.R.

2016-01-01

Graves’ disease is the most common cause of hyperthyroidism and is often managed with radioactive iodine (RAI) therapy. With current dosing schemes, the vast majority of patients develop permanent post-RAI hypothyroidism and are placed on life-long levothyroxine therapy. This hypothyroidism typically occurs within the first 3 to 6 months after RAI therapy is administered. Indeed, patients are typically told to expect life-long thyroid hormone replacement therapy to be required within this timeframe and many providers expect this post-RAI hypothyroidism to be complete and permanent. There is, however, a small subset of patients in whom a transient post-RAI hypothyroidism develops which, initially, presents exactly as the typical permanent hypothyroidism. In some cases the transient hypothyroidism leads to a period of euthyroidism of variable duration eventually progressing to permanent hypothyroidism. In others, persistent hyperthyroidism requires a second dose of RAI. Failure to appreciate and recognize the possibility of transient post-RAI hypothyroidism can delay optimal and appropriate treatment of the patient. We herein describe five cases of transient post-RAI hypothyroidism which highlight this unusual sequence of events. Increased awareness of this possible outcome after RAI for Graves’ disease will help in the timely management of patients. PMID:26864507

Iowa community college Science, Engineering and Mathematics (SEM) faculty: Demographics and job satisfaction

NASA Astrophysics Data System (ADS)

Rogotzke, Kathy

Community college faculty members play an increasingly important role in the educational system in the United States. However, over the past decade, concerns have arisen, especially in several high demand fields of science, technology, engineering and mathematics (STEM), that a shortage of qualified faculty in these fields exists. Furthermore, the average age of community college faculty is increasing, which creates added concern of an increased shortage of qualified faculty due to a potentially large number of faculty retiring. To help further understand the current population of community college faculty, as well as their training needs and their satisfaction with their jobs, data needs to be collected from them and examined. Currently, several national surveys are given to faculty at institutions of higher education, most notably the Higher Education Research Institute Faculty Survey, the National Study of Postsecondary Faculty, and the Community College Faculty Survey of Student Engagement. Of these surveys the Community College Faculty Survey of Student Engagement is the only survey focused solely on community college faculty. This creates a problem because community college faculty members differ from faculty at 4-year institutions in several significant ways. First, qualifications for hiring community college faculty are different at 4-year colleges or universities. Whereas universities and colleges typically require their faculty to have a Ph.D., community colleges require their arts and science faculty to have a only master's degree and their career faculty to have experience and the appropriate training and certification in their field with only a bachelor's degree. The work duties and expectations for community college faculty are also different at 4-year colleges or universities. Community college faculty typically teach 14 to 19 credit hours a semester and do little, if any research, whereas faculty at 4-year colleges typically teach 9 to 12 credit hours a semester and are expected to conduct research and publish their findings. In addition, community colleges often have what is referred to as an "open door" policy of admission meaning that students are not required to have a particular score on a college placement test, such as the ACT or SAT, nor are they required to have a specified high school grade point average or rank. Most 4-year colleges and universities require a minimum score on a college placement test in addition to a minimum high school grade point average or rank. Because of these differing entrance requirements, or lack thereof, community colleges often have a higher percentage of students needing remedial or developmental coursework. This dissertation reports on data collected from a survey administered to full-time faculty at all 15 community colleges in Iowa. The survey was administered using Qualtrics software with assistance from the Office of Community College Research and Policy at Iowa State University. The results of the study were used to further examine who community college science, engineering and mathematics (SEM) faculty are in terms of their demographics and background, along with investigating factors from the survey that contribute to their overall job satisfaction. Multiple regression analysis on these variables along with gender and age examined different models for predicting overall job satisfaction.

Use of randomised controlled trials for producing cost-effectiveness evidence: potential impact of design choices on sample size and study duration.

PubMed

Backhouse, Martin E

2002-01-01

A number of approaches to conducting economic evaluations could be adopted. However, some decision makers have a preference for wholly stochastic cost-effectiveness analyses, particularly if the sampled data are derived from randomised controlled trials (RCTs). Formal requirements for cost-effectiveness evidence have heightened concerns in the pharmaceutical industry that development costs and times might be increased if formal requirements increase the number, duration or costs of RCTs. Whether this proves to be the case or not will depend upon the timing, nature and extent of the cost-effectiveness evidence required. To illustrate how different requirements for wholly stochastic cost-effectiveness evidence could have a significant impact on two of the major determinants of new drug development costs and times, namely RCT sample size and study duration. Using data collected prospectively in a clinical evaluation, sample sizes were calculated for a number of hypothetical cost-effectiveness study design scenarios. The results were compared with a baseline clinical trial design. The sample sizes required for the cost-effectiveness study scenarios were mostly larger than those for the baseline clinical trial design. Circumstances can be such that a wholly stochastic cost-effectiveness analysis might not be a practical proposition even though its clinical counterpart is. In such situations, alternative research methodologies would be required. For wholly stochastic cost-effectiveness analyses, the importance of prior specification of the different components of study design is emphasised. However, it is doubtful whether all the information necessary for doing this will typically be available when product registration trials are being designed. Formal requirements for wholly stochastic cost-effectiveness evidence based on the standard frequentist paradigm have the potential to increase the size, duration and number of RCTs significantly and hence the costs and timelines associated with new product development. Moreover, it is possible to envisage situations where such an approach would be impossible to adopt. Clearly, further research is required into the issue of how to appraise the economic consequences of alternative economic evaluation research strategies.

Zombie algorithms: a timesaving remote sensing systems engineering tool

NASA Astrophysics Data System (ADS)

Ardanuy, Philip E.; Powell, Dylan C.; Marley, Stephen

2008-08-01

In modern horror fiction, zombies are generally undead corpses brought back from the dead by supernatural or scientific means, and are rarely under anyone's direct control. They typically have very limited intelligence, and hunger for the flesh of the living [1]. Typical spectroradiometric or hyperspectral instruments providess calibrated radiances for a number of remote sensing algorithms. The algorithms typically must meet specified latency and availability requirements while yielding products at the required quality. These systems, whether research, operational, or a hybrid, are typically cost constrained. Complexity of the algorithms can be high, and may evolve and mature over time as sensor characterization changes, product validation occurs, and areas of scientific basis improvement are identified and completed. This suggests the need for a systems engineering process for algorithm maintenance that is agile, cost efficient, repeatable, and predictable. Experience on remote sensing science data systems suggests the benefits of "plug-n-play" concepts of operation. The concept, while intuitively simple, can be challenging to implement in practice. The use of zombie algorithms-empty shells that outwardly resemble the form, fit, and function of a "complete" algorithm without the implemented theoretical basis-provides the ground systems advantages equivalent to those obtained by integrating sensor engineering models onto the spacecraft bus. Combined with a mature, repeatable process for incorporating the theoretical basis, or scientific core, into the "head" of the zombie algorithm, along with associated scripting and registration, provides an easy "on ramp" for the rapid and low-risk integration of scientific applications into operational systems.

Spacelab system analysis: A study of the Marshall Avionics System Testbed (MAST)

NASA Astrophysics Data System (ADS)

Ingels, Frank M.; Owens, John K.; Daniel, Steven P.; Ahmad, F.; Couvillion, W.

1988-09-01

An analysis of the Marshall Avionics Systems Testbed (MAST) communications requirements is presented. The average offered load for typical nodes is estimated. Suitable local area networks are determined.

Achieving Airport Carbon Neutrality

DOT National Transportation Integrated Search

2016-03-01

This report is a guide for airports that wish to reduce or eliminate greenhouse gas (GHG) emissions from existing buildings and operations. Reaching carbon neutrality typically requires the use of multiple mechanisms to first minimize energy consumpt...

Factors associated with continuance commitment to FAA matrix teams.

DOT National Transportation Integrated Search

1993-11-01

Several organizations within the FAA employ matrix teams to achieve cross-functional coordination. Matrix team members typically represent different organizational functions required for project accomplishment (e.g., research and development, enginee...

SCIENCE, SCIENTISTS, AND POLICY ADVOCACY

EPA Science Inventory

Effectively resolving the typical ecological policy issue requires providing an array of scientific information to decision-makers. In my experience, the ability of scientists (and scientific information) to inform constructively ecological policy deliberations has been diminishe...

Spacelab system analysis: A study of the Marshall Avionics System Testbed (MAST)

NASA Technical Reports Server (NTRS)

Ingels, Frank M.; Owens, John K.; Daniel, Steven P.; Ahmad, F.; Couvillion, W.

1988-01-01

An analysis of the Marshall Avionics Systems Testbed (MAST) communications requirements is presented. The average offered load for typical nodes is estimated. Suitable local area networks are determined.

Herb-drug interactions. Interactions between saw palmetto and prescription medications.

PubMed

Bressler, Rubin

2005-11-01

Patients over age 50 typically present with one chronic disease per decade. Each chronic disease typically requires long-term drug therapy, meaning most older patients require several drugs to maintain health. Simultaneously, use of complementary and alternative medicine (CAM) has increased in the United States in the last 20 years, reaching 36% in 2002; herbal medicine use accounts for approximately 22% of all CAM use. Older adults often add herbal medicines to prescription medications, yet do not always inform their physicians. The drug metabolizing enzyme systems process all compounds foreign to the body, including prescription and herbal medications. Therefore use of both medicinals simultaneously has a potential for adverse interactions. This review, which discusses saw palmetto, is the last in a series covering the documented interactions among the top 5 efficacious herbal medicines and prescription drugs.

District heating with geothermally heated culinary water supply systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pitts, D.R.; Schmitt, R.C.

1979-09-01

An initial feasibility study of using existing culinary water supply systems to provide hot water for space heating and air conditioning to a typical residential community is reported. The Phase I study has centered on methods of using low-to-moderate temperature water for heating purposes including institutional barriers, identification and description of a suitable residential commnity water system, evaluation of thermal losses in both the main distribution system and the street mains within the residential district, estimation of size and cost of the pumping station main heat exchanger, sizing of individual residential heat exchangers, determination of pumping and power requirements duemore » to increased flow through the residential area mains, and pumping and power requirements from the street mains through a typical residence. All results of the engineering study of Phase I are encouraging.« less

Expression of short hairpin RNAs using the compact architecture of retroviral microRNA genes.

PubMed

Burke, James M; Kincaid, Rodney P; Aloisio, Francesca; Welch, Nicole; Sullivan, Christopher S

2017-09-29

Short hairpin RNAs (shRNAs) are effective in generating stable repression of gene expression. RNA polymerase III (RNAP III) type III promoters (U6 or H1) are typically used to drive shRNA expression. While useful for some knockdown applications, the robust expression of U6/H1-driven shRNAs can induce toxicity and generate heterogeneous small RNAs with undesirable off-target effects. Additionally, typical U6/H1 promoters encompass the majority of the ∼270 base pairs (bp) of vector space required for shRNA expression. This can limit the efficacy and/or number of delivery vector options, particularly when delivery of multiple gene/shRNA combinations is required. Here, we develop a compact shRNA (cshRNA) expression system based on retroviral microRNA (miRNA) gene architecture that uses RNAP III type II promoters. We demonstrate that cshRNAs coded from as little as 100 bps of total coding space can precisely generate small interfering RNAs (siRNAs) that are active in the RNA-induced silencing complex (RISC). We provide an algorithm with a user-friendly interface to design cshRNAs for desired target genes. This cshRNA expression system reduces the coding space required for shRNA expression by >2-fold as compared to the typical U6/H1 promoters, which may facilitate therapeutic RNAi applications where delivery vector space is limiting. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

Early erythropoietin for preventing red blood cell transfusion in preterm and/or low birth weight infants.

PubMed

Ohlsson, A; Aher, S M

2006-07-19

Hematocrit falls after birth in preterm infants due to physiological factors and blood letting. Low plasma levels of erythropoietin (EPO) in preterm infants provide a rationale for the use of EPO to prevent or treat anemia. To assess the effectiveness and safety of early initiation of EPO (initiated before eight days after birth) in reducing red blood cell transfusions in preterm and/or low birth weight infants. Subgroup analyses of low (< 500 IU/kg/week) and high (> 500 IU/kg/week) doses of EPO and, within these subgroups, analyses of the use of low (< 5 mg/kg/day) and high (> 5 mg/kg/day) doses of supplemental iron, in reducing red blood cell transfusions in these infants. The Cochrane Central Register of Controlled Trials (CENTRAL, The Cochrane Library), MEDLINE, EMBASE, CINAHL, abstracts from scientific meetings published in Pediatric Research and reference lists of identified trials and reviews were searched in November 2005. No language restrictions were applied. Randomised or quasi-randomized controlled trials of early initiation of EPO treatment (started before 8 days of age) vs. placebo or no intervention in preterm (< 37 weeks) and/or low birth weight (< 2500 g) neonates. For inclusion, the studies needed to provide information on at least one outcome of interest. Data were abstracted by the two authors on pre-tested data collection forms. Data were entered by one review author (AO) and checked for accuracy by the other (SA). Data were analysed using RevMan 4.2.8. The statistical methods included 'typical' relative risk (RR), risk difference (RD), number needed to treat to benefit (NNTB) and needed to treat to harm (NNTH) for dichotomous outcomes and weighted mean difference (WMD) for continuous outcomes reported with their 95% confidence intervals (CI). A fixed effects model was used for meta-analyses. Heterogeneity tests, including the I(-)squared (I(2)) statistic, were performed to assess the appropriateness of pooling the data. Twenty-three studies enrolling 2074 preterm infants in 18 countries were included in the review. All studies except one applied transfusion guidelines. The quality of the trials varied. Most trials were of small sample size. Only one study clearly stated that infants were excluded if they had received red blood cell transfusion prior to study entry (Arif 2005). A total of 16 studies, including 1825 infants reported on the primary outcome of "use of one or more red cell transfusions". The summary estimates were significant [typical RR; 0.80 (95% CI 0.75, 0.86); typical RD; -0.13 (95% CI -0.17, -0.09); typical NNTB; 8 (95% CI 6, 11)]. There was statistically significant heterogeneity [for RR (p< 0.004), I(2) = 56.7%; for RD (p = 0.003), I(2 ) = 56.0%]. Similar results were obtained in secondary analyses based on different combinations of high doses of EPO and high and low iron supplementation. There were insufficient data to draw conclusions for low doses EPO in combination with high or low dose of iron. Two studies (n = 188) reported a significant reduction in the number of donors to whom the infant was exposed [typical WMD; -0.63 (95% CI -1.07, -0.19)]. A significant reduction in the total volume (ml/kg) of blood transfused per infant [typical WMD; -6 ml (95% CI -1, -11)] and in the number of transfusions per infant [typical WMD -0.27 (95% CI -0.12, -0.42 )] was noted. There was a significant increase in the risk of stage > 3 retinopathy of prematurity (ROP) in the EPO group [typical RR; 1.71 (95% CI 1.15, 2.54); typical RD; 0.05 (95% CI 0.01, 0.09); NNTH; 20 (95% CI 11, 100)]. The non-significant results for ROP (any stage reported) showed a similar trend. The increased risk for ROP may be associated with use of higher doses of supplemental of iron in the EPO group than in the control group. The rates for mortality, sepsis, intraventricular haemorrhage, periventricular leukomalacia, necrotizing enterocolitis, bronchopulmonary dysplasia, neutropenia, hypertension, length of hospital stay or long-term neurodevelopmental outcomes were not significantly change by the administration of EPO. Early administration of EPO reduces the use one or more red blood cell transfusions, the volume of red blood cells transfused, and the number of donors and transfusions the infant is exposed to following study entry. The small reductions are of limited clinical importance. Any donor exposure is likely not avoided as most studies included infants, who had received red cell transfusions prior to trial entry. There was a significant increase in the rate of ROP (stage >3). Animal data and observational studies in humans support a possible association between treatment with EPO and the development of ROP. EPO does not significantly decrease or increase any of the other important neonatal adverse outcomes including mortality. The incidence of ROP should be ascertained in the studies that have already been conducted but did not report on this outcome. Any ongoing research should deal with the issue of ROP and evaluate the current clinical practice that will limit donor exposure through satellite units. Research efforts should focus on limiting donor exposure (to as few donors as possible) during the first few days of life in sick neonates, when red blood cell transfusions are most likely to be required and cannot be prevented by early (or late) EPO treatment. Due to the limited benefits and the increased risk of ROP, early administration of EPO is not recommended.

Survival rate of eukaryotic cells following electrophoretic nanoinjection.

PubMed

Simonis, Matthias; Hübner, Wolfgang; Wilking, Alice; Huser, Thomas; Hennig, Simon

2017-01-25

Insertion of foreign molecules such as functionalized fluorescent probes, antibodies, or plasmid DNA to living cells requires overcoming the plasma membrane barrier without harming the cell during the staining process. Many techniques such as electroporation, lipofection or microinjection have been developed to overcome the cellular plasma membrane, but they all result in reduced cell viability. A novel approach is the injection of cells with a nanopipette and using electrophoretic forces for the delivery of molecules. The tip size of these pipettes is approximately ten times smaller than typical microinjection pipettes and rather than pressure pulses as delivery method, moderate DC electric fields are used to drive charged molecules out of the tip. Here, we show that this approach leads to a significantly higher survival rate of nanoinjected cells and that injection with nanopipettes has a significantly lower impact on the proliferation behavior of injected cells. Thus, we propose that injection with nanopipettes using electrophoretic delivery is an excellent alternative when working with valuable and rare living cells, such as primary cells or stem cells.